2045 files changed, 62361 insertions, 41162 deletions

diff --git a/Documentation/ABI/testing/sysfs-class-regulator b/Documentation/ABI/testing/sysfs-class-regulator
new file mode 100644
index 000000000000..79a4a75b2d2c
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-regulator
@@ -0,0 +1,315 @@
+What:           /sys/class/regulator/.../state
+Date:           April 2008
+KernelVersion:  2.6.26
+Contact:        Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+                Each regulator directory will contain a field called
+                state. This holds the regulator output state.
+
+                This will be one of the following strings:
+
+                'enabled'
+                'disabled'
+                'unknown'
+
+                'enabled' means the regulator output is ON and is supplying
+                power to the system.
+
+                'disabled' means the regulator output is OFF and is not
+                supplying power to the system..
+
+                'unknown' means software cannot determine the state.
+
+                NOTE: this field can be used in conjunction with microvolts
+                and microamps to determine regulator output levels.
+
+
+What:           /sys/class/regulator/.../type
+Date:           April 2008
+KernelVersion:  2.6.26
+Contact:        Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+                Each regulator directory will contain a field called
+                type. This holds the regulator type.
+
+                This will be one of the following strings:
+
+                'voltage'
+                'current'
+                'unknown'
+
+                'voltage' means the regulator output voltage can be controlled
+                by software.
+
+                'current' means the regulator output current limit can be
+                controlled by software.
+
+                'unknown' means software cannot control either voltage or
+                current limit.
+
+
+What:           /sys/class/regulator/.../microvolts
+Date:           April 2008
+KernelVersion:  2.6.26
+Contact:        Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+                Each regulator directory will contain a field called
+                microvolts. This holds the regulator output voltage setting
+                measured in microvolts (i.e. E-6 Volts).
+
+                NOTE: This value should not be used to determine the regulator
+                output voltage level as this value is the same regardless of
+                whether the regulator is enabled or disabled.
+
+
+What:           /sys/class/regulator/.../microamps
+Date:           April 2008
+KernelVersion:  2.6.26
+Contact:        Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+                Each regulator directory will contain a field called
+                microamps. This holds the regulator output current limit
+                setting measured in microamps (i.e. E-6 Amps).
+
+                NOTE: This value should not be used to determine the regulator
+                output current level as this value is the same regardless of
+                whether the regulator is enabled or disabled.
+
+
+What:           /sys/class/regulator/.../opmode
+Date:           April 2008
+KernelVersion:  2.6.26
+Contact:        Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+                Each regulator directory will contain a field called
+                opmode. This holds the regulator operating mode setting.
+
+                The opmode value can be one of the following strings:
+
+                'fast'
+                'normal'
+                'idle'
+                'standby'
+                'unknown'
+
+                The modes are described in include/linux/regulator/regulator.h
+
+                NOTE: This value should not be used to determine the regulator
+                output operating mode as this value is the same regardless of
+                whether the regulator is enabled or disabled.
+
+
+What:           /sys/class/regulator/.../min_microvolts
+Date:           April 2008
+KernelVersion:  2.6.26
+Contact:        Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+                Each regulator directory will contain a field called
+                min_microvolts. This holds the minimum safe working regulator
+                output voltage setting for this domain measured in microvolts.
+
+                NOTE: this will return the string 'constraint not defined' if
+                the power domain has no min microvolts constraint defined by
+                platform code.
+
+
+What:           /sys/class/regulator/.../max_microvolts
+Date:           April 2008
+KernelVersion:  2.6.26
+Contact:        Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+                Each regulator directory will contain a field called
+                max_microvolts. This holds the maximum safe working regulator
+                output voltage setting for this domain measured in microvolts.
+
+                NOTE: this will return the string 'constraint not defined' if
+                the power domain has no max microvolts constraint defined by
+                platform code.
+
+
+What:           /sys/class/regulator/.../min_microamps
+Date:           April 2008
+KernelVersion:  2.6.26
+Contact:        Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+                Each regulator directory will contain a field called
+                min_microamps. This holds the minimum safe working regulator
+                output current limit setting for this domain measured in
+                microamps.
+
+                NOTE: this will return the string 'constraint not defined' if
+                the power domain has no min microamps constraint defined by
+                platform code.
+
+
+What:           /sys/class/regulator/.../max_microamps
+Date:           April 2008
+KernelVersion:  2.6.26
+Contact:        Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+                Each regulator directory will contain a field called
+                max_microamps. This holds the maximum safe working regulator
+                output current limit setting for this domain measured in
+                microamps.
+
+                NOTE: this will return the string 'constraint not defined' if
+                the power domain has no max microamps constraint defined by
+                platform code.
+
+
+What:           /sys/class/regulator/.../num_users
+Date:           April 2008
+KernelVersion:  2.6.26
+Contact:        Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+                Each regulator directory will contain a field called
+                num_users. This holds the number of consumer devices that
+                have called regulator_enable() on this regulator.
+
+
+What:           /sys/class/regulator/.../requested_microamps
+Date:           April 2008
+KernelVersion:  2.6.26
+Contact:        Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+                Each regulator directory will contain a field called
+                requested_microamps. This holds the total requested load
+                current in microamps for this regulator from all its consumer
+                devices.
+
+
+What:           /sys/class/regulator/.../parent
+Date:           April 2008
+KernelVersion:  2.6.26
+Contact:        Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+                Some regulator directories will contain a link called parent.
+                This points to the parent or supply regulator if one exists.
+
+What:           /sys/class/regulator/.../suspend_mem_microvolts
+Date:           May 2008
+KernelVersion:  2.6.26
+Contact:        Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+                Each regulator directory will contain a field called
+                suspend_mem_microvolts. This holds the regulator output
+                voltage setting for this domain measured in microvolts when
+                the system is suspended to memory.
+
+                NOTE: this will return the string 'not defined' if
+                the power domain has no suspend to memory voltage defined by
+                platform code.
+
+What:           /sys/class/regulator/.../suspend_disk_microvolts
+Date:           May 2008
+KernelVersion:  2.6.26
+Contact:        Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+                Each regulator directory will contain a field called
+                suspend_disk_microvolts. This holds the regulator output
+                voltage setting for this domain measured in microvolts when
+                the system is suspended to disk.
+
+                NOTE: this will return the string 'not defined' if
+                the power domain has no suspend to disk voltage defined by
+                platform code.
+
+What:           /sys/class/regulator/.../suspend_standby_microvolts
+Date:           May 2008
+KernelVersion:  2.6.26
+Contact:        Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+                Each regulator directory will contain a field called
+                suspend_standby_microvolts. This holds the regulator output
+                voltage setting for this domain measured in microvolts when
+                the system is suspended to standby.
+
+                NOTE: this will return the string 'not defined' if
+                the power domain has no suspend to standby voltage defined by
+                platform code.
+
+What:           /sys/class/regulator/.../suspend_mem_mode
+Date:           May 2008
+KernelVersion:  2.6.26
+Contact:        Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+                Each regulator directory will contain a field called
+                suspend_mem_mode. This holds the regulator operating mode
+                setting for this domain when the system is suspended to
+                memory.
+
+                NOTE: this will return the string 'not defined' if
+                the power domain has no suspend to memory mode defined by
+                platform code.
+
+What:           /sys/class/regulator/.../suspend_disk_mode
+Date:           May 2008
+KernelVersion:  2.6.26
+Contact:        Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+                Each regulator directory will contain a field called
+                suspend_disk_mode. This holds the regulator operating mode
+                setting for this domain when the system is suspended to disk.
+
+                NOTE: this will return the string 'not defined' if
+                the power domain has no suspend to disk mode defined by
+                platform code.
+
+What:           /sys/class/regulator/.../suspend_standby_mode
+Date:           May 2008
+KernelVersion:  2.6.26
+Contact:        Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+                Each regulator directory will contain a field called
+                suspend_standby_mode. This holds the regulator operating mode
+                setting for this domain when the system is suspended to
+                standby.
+
+                NOTE: this will return the string 'not defined' if
+                the power domain has no suspend to standby mode defined by
+                platform code.
+
+What:           /sys/class/regulator/.../suspend_mem_state
+Date:           May 2008
+KernelVersion:  2.6.26
+Contact:        Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+                Each regulator directory will contain a field called
+                suspend_mem_state. This holds the regulator operating state
+                when suspended to memory.
+
+                This will be one of the following strings:
+
+                'enabled'
+                'disabled'
+                'not defined'
+
+What:           /sys/class/regulator/.../suspend_disk_state
+Date:           May 2008
+KernelVersion:  2.6.26
+Contact:        Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+                Each regulator directory will contain a field called
+                suspend_disk_state. This holds the regulator operating state
+                when suspended to disk.
+
+                This will be one of the following strings:
+
+                'enabled'
+                'disabled'
+                'not defined'
+
+What:           /sys/class/regulator/.../suspend_standby_state
+Date:           May 2008
+KernelVersion:  2.6.26
+Contact:        Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+                Each regulator directory will contain a field called
+                suspend_standby_state. This holds the regulator operating
+                state when suspended to standby.
+
+                This will be one of the following strings:
+
+                'enabled'
+                'disabled'
+                'not defined'
diff --git a/Documentation/DocBook/kgdb.tmpl b/Documentation/DocBook/kgdb.tmpl
index e8acd1f03456..372dec20c8da 100644
--- a/Documentation/DocBook/kgdb.tmpl
+++ b/Documentation/DocBook/kgdb.tmpl
@@ -98,6 +98,24 @@
     "Kernel debugging" select "KGDB: kernel debugging with remote gdb".
     </para>
     <para>
+    It is advised, but not required that you turn on the
+    CONFIG_FRAME_POINTER kernel option.  This option inserts code to
+    into the compiled executable which saves the frame information in
+    registers or on the stack at different points which will allow a
+    debugger such as gdb to more accurately construct stack back traces
+    while debugging the kernel.
+    </para>
+    <para>
+    If the architecture that you are using supports the kernel option
+    CONFIG_DEBUG_RODATA, you should consider turning it off.  This
+    option will prevent the use of software breakpoints because it
+    marks certain regions of the kernel's memory space as read-only.
+    If kgdb supports it for the architecture you are using, you can
+    use hardware breakpoints if you desire to run with the
+    CONFIG_DEBUG_RODATA option turned on, else you need to turn off
+    this option.
+    </para>
+    <para>
     Next you should choose one of more I/O drivers to interconnect debugging
     host and debugged target.  Early boot debugging requires a KGDB
     I/O driver that supports early debugging and the driver must be
diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches
index 118ca6e9404f..f79ad9ff6031 100644
--- a/Documentation/SubmittingPatches
+++ b/Documentation/SubmittingPatches
@@ -528,7 +528,33 @@ See more details on the proper patch format in the following
 references.
 
 
+16) Sending "git pull" requests  (from Linus emails)
 
+Please write the git repo address and branch name alone on the same line
+so that I can't even by mistake pull from the wrong branch, and so
+that a triple-click just selects the whole thing.
+
+So the proper format is something along the lines of:
+
+        "Please pull from
+
+                git://jdelvare.pck.nerim.net/jdelvare-2.6 i2c-for-linus
+
+         to get these changes:"
+
+so that I don't have to hunt-and-peck for the address and inevitably
+get it wrong (actually, I've only gotten it wrong a few times, and
+checking against the diffstat tells me when I get it wrong, but I'm
+just a lot more comfortable when I don't have to "look for" the right
+thing to pull, and double-check that I have the right branch-name).
+
+
+Please use "git diff -M --stat --summary" to generate the diffstat:
+the -M enables rename detection, and the summary enables a summary of
+new/deleted or renamed files.
+
+With rename detection, the statistics are rather different [...]
+because git will notice that a fair number of the changes are renames.
 
 -----------------------------------
 SECTION 2 - HINTS, TIPS, AND TRICKS
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 721c71b86e06..c23955404bf5 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -47,6 +47,30 @@ Who:	Mauro Carvalho Chehab <mchehab@infradead.org>
 
 ---------------------------
 
+What:   old tuner-3036 i2c driver
+When:   2.6.28
+Why:    This driver is for VERY old i2c-over-parallel port teletext receiver
+        boxes. Rather then spending effort on converting this driver to V4L2,
+        and since it is extremely unlikely that anyone still uses one of these
+        devices, it was decided to drop it.
+Who:    Hans Verkuil <hverkuil@xs4all.nl>
+        Mauro Carvalho Chehab <mchehab@infradead.org>
+
+ ---------------------------
+
+What:   V4L2 dpc7146 driver
+When:   2.6.28
+Why:    Old driver for the dpc7146 demonstration board that is no longer
+        relevant. The last time this was tested on actual hardware was
+        probably around 2002. Since this is a driver for a demonstration
+        board the decision was made to remove it rather than spending a
+        lot of effort continually updating this driver to stay in sync
+        with the latest internal V4L2 or I2C API.
+Who:    Hans Verkuil <hverkuil@xs4all.nl>
+        Mauro Carvalho Chehab <mchehab@infradead.org>
+
+---------------------------
+
 What:   PCMCIA control ioctl (needed for pcmcia-cs [cardmgr, cardctl])
 When:   November 2005
 Files:  drivers/pcmcia/: pcmcia_ioctl.c
diff --git a/Documentation/hwmon/dme1737 b/Documentation/hwmon/dme1737
index 8f446070e64a..b1fe00999439 100644
--- a/Documentation/hwmon/dme1737
+++ b/Documentation/hwmon/dme1737
@@ -22,6 +22,10 @@ Module Parameters
                         and PWM output control functions. Using this parameter
                         shouldn't be required since the BIOS usually takes care
                         of this.
+* probe_all_addr: bool  Include non-standard LPC addresses 0x162e and 0x164e
+                        when probing for ISA devices. This is required for the
+                        following boards:
+                        - VIA EPIA SN18000
 
 Note that there is no need to use this parameter if the driver loads without
 complaining. The driver will say so if it is necessary.
diff --git a/Documentation/hwmon/lm85 b/Documentation/hwmon/lm85
index 9549237530cf..6d41db7f17f8 100644
--- a/Documentation/hwmon/lm85
+++ b/Documentation/hwmon/lm85
@@ -96,11 +96,6 @@ initial testing of the ADM1027 it was 1.00 degC steps. Analog Devices has
 confirmed this "bug". The ADT7463 is reported to work as described in the
 documentation. The current lm85 driver does not show the offset register.
 
-The ADT7463 has a THERM asserted counter. This counter has a 22.76ms
-resolution and a range of 5.8 seconds. The driver implements a 32-bit
-accumulator of the counter value to extend the range to over a year. The
-counter will stay at it's max value until read.
-
 See the vendor datasheets for more information. There is application note
 from National (AN-1260) with some additional information about the LM85.
 The Analog Devices datasheet is very detailed and describes a procedure for
@@ -206,13 +201,15 @@ Configuration choices:
 
 The National LM85's have two vendor specific configuration
 features. Tach. mode and Spinup Control. For more details on these,
-see the LM85 datasheet or Application Note AN-1260.
+see the LM85 datasheet or Application Note AN-1260. These features
+are not currently supported by the lm85 driver.
 
 The Analog Devices ADM1027 has several vendor specific enhancements.
 The number of pulses-per-rev of the fans can be set, Tach monitoring
 can be optimized for PWM operation, and an offset can be applied to
 the temperatures to compensate for systemic errors in the
-measurements.
+measurements. These features are not currently supported by the lm85
+driver.
 
 In addition to the ADM1027 features, the ADT7463 also has Tmin control
 and THERM asserted counts. Automatic Tmin control acts to adjust the
diff --git a/Documentation/i2c/upgrading-clients b/Documentation/i2c/upgrading-clients
new file mode 100644
index 000000000000..9a45f9bb6a25
--- /dev/null
+++ b/Documentation/i2c/upgrading-clients
@@ -0,0 +1,281 @@
+Upgrading I2C Drivers to the new 2.6 Driver Model
+=================================================
+
+Ben Dooks <ben-linux@fluff.org>
+
+Introduction
+------------
+
+This guide outlines how to alter existing Linux 2.6 client drivers from
+the old to the new new binding methods.
+
+
+Example old-style driver
+------------------------
+
+
+struct example_state {
+        struct i2c_client       client;
+        ....
+};
+
+static struct i2c_driver example_driver;
+
+static unsigned short ignore[] = { I2C_CLIENT_END };
+static unsigned short normal_addr[] = { OUR_ADDR, I2C_CLIENT_END };
+
+I2C_CLIENT_INSMOD;
+
+static int example_attach(struct i2c_adapter *adap, int addr, int kind)
+{
+        struct example_state *state;
+        struct device *dev = &adap->dev;  /* to use for dev_ reports */
+        int ret;
+
+        state = kzalloc(sizeof(struct example_state), GFP_KERNEL);
+        if (state == NULL) {
+                dev_err(dev, "failed to create our state\n");
+                return -ENOMEM;
+        }
+
+        example->client.addr    = addr;
+        example->client.flags   = 0;
+        example->client.adapter = adap;
+
+        i2c_set_clientdata(&state->i2c_client, state);
+        strlcpy(client->i2c_client.name, "example", I2C_NAME_SIZE);
+
+        ret = i2c_attach_client(&state->i2c_client);
+        if (ret < 0) {
+                dev_err(dev, "failed to attach client\n");
+                kfree(state);
+                return ret;
+        }
+
+        dev = &state->i2c_client.dev;
+
+        /* rest of the initialisation goes here. */
+
+        dev_info(dev, "example client created\n");
+
+        return 0;
+}
+
+static int __devexit example_detach(struct i2c_client *client)
+{
+        struct example_state *state = i2c_get_clientdata(client);
+
+        i2c_detach_client(client);
+        kfree(state);
+        return 0;
+}
+
+static int example_attach_adapter(struct i2c_adapter *adap)
+{
+        return i2c_probe(adap, &addr_data, example_attach);
+}
+
+static struct i2c_driver example_driver = {
+        .driver         = {
+                .owner          = THIS_MODULE,
+                .name           = "example",
+        },
+        .attach_adapter = example_attach_adapter,
+        .detach_client  = __devexit_p(example_detach),
+        .suspend        = example_suspend,
+        .resume         = example_resume,
+};
+
+
+Updating the client
+-------------------
+
+The new style binding model will check against a list of supported
+devices and their associated address supplied by the code registering
+the busses. This means that the driver .attach_adapter and
+.detach_adapter methods can be removed, along with the addr_data,
+as follows:
+
+- static struct i2c_driver example_driver;
+
+- static unsigned short ignore[] = { I2C_CLIENT_END };
+- static unsigned short normal_addr[] = { OUR_ADDR, I2C_CLIENT_END };
+
+- I2C_CLIENT_INSMOD;
+
+- static int example_attach_adapter(struct i2c_adapter *adap)
+- {
+-       return i2c_probe(adap, &addr_data, example_attach);
+- }
+
+ static struct i2c_driver example_driver = {
+-       .attach_adapter = example_attach_adapter,
+-       .detach_client  = __devexit_p(example_detach),
+ }
+
+Add the probe and remove methods to the i2c_driver, as so:
+
+ static struct i2c_driver example_driver = {
++       .probe          = example_probe,
++       .remove         = __devexit_p(example_remove),
+ }
+
+Change the example_attach method to accept the new parameters
+which include the i2c_client that it will be working with:
+
+- static int example_attach(struct i2c_adapter *adap, int addr, int kind)
++ static int example_probe(struct i2c_client *client,
++                          const struct i2c_device_id *id)
+
+Change the name of example_attach to example_probe to align it with the
+i2c_driver entry names. The rest of the probe routine will now need to be
+changed as the i2c_client has already been setup for use.
+
+The necessary client fields have already been setup before
+the probe function is called, so the following client setup
+can be removed:
+
+-       example->client.addr    = addr;
+-       example->client.flags   = 0;
+-       example->client.adapter = adap;
+-
+-       strlcpy(client->i2c_client.name, "example", I2C_NAME_SIZE);
+
+The i2c_set_clientdata is now:
+
+-       i2c_set_clientdata(&state->client, state);
++       i2c_set_clientdata(client, state);
+
+The call to i2c_attach_client is no longer needed, if the probe
+routine exits successfully, then the driver will be automatically
+attached by the core. Change the probe routine as so:
+
+-       ret = i2c_attach_client(&state->i2c_client);
+-       if (ret < 0) {
+-               dev_err(dev, "failed to attach client\n");
+-               kfree(state);
+-               return ret;
+-       }
+
+
+Remove the storage of 'struct i2c_client' from the 'struct example_state'
+as we are provided with the i2c_client in our example_probe. Instead we
+store a pointer to it for when it is needed.
+
+struct example_state {
+-       struct i2c_client       client;
++       struct i2c_client       *client;
+
+the new i2c client as so:
+
+-       struct device *dev = &adap->dev;  /* to use for dev_ reports */
++       struct device *dev = &i2c_client->dev;  /* to use for dev_ reports */
+
+And remove the change after our client is attached, as the driver no
+longer needs to register a new client structure with the core:
+
+-       dev = &state->i2c_client.dev;
+
+In the probe routine, ensure that the new state has the client stored
+in it:
+
+static int example_probe(struct i2c_client *i2c_client,
+                         const struct i2c_device_id *id)
+{
+        struct example_state *state;
+        struct device *dev = &i2c_client->dev;
+        int ret;
+
+        state = kzalloc(sizeof(struct example_state), GFP_KERNEL);
+        if (state == NULL) {
+                dev_err(dev, "failed to create our state\n");
+                return -ENOMEM;
+        }
+
++       state->client = i2c_client;
+
+Update the detach method, by changing the name to _remove and
+to delete the i2c_detach_client call. It is possible that you
+can also remove the ret variable as it is not not needed for
+any of the core functions.
+
+- static int __devexit example_detach(struct i2c_client *client)
++ static int __devexit example_remove(struct i2c_client *client)
+{
+        struct example_state *state = i2c_get_clientdata(client);
+
+-       i2c_detach_client(client);
+
+And finally ensure that we have the correct ID table for the i2c-core
+and other utilities:
+
++ struct i2c_device_id example_idtable[] = {
++       { "example", 0 },
++       { }
++};
++
++MODULE_DEVICE_TABLE(i2c, example_idtable);
+
+static struct i2c_driver example_driver = {
+        .driver         = {
+                .owner          = THIS_MODULE,
+                .name           = "example",
+        },
++       .id_table       = example_ids,
+
+
+Our driver should now look like this:
+
+struct example_state {
+        struct i2c_client       *client;
+        ....
+};
+
+static int example_probe(struct i2c_client *client,
+                         const struct i2c_device_id *id)
+{
+        struct example_state *state;
+        struct device *dev = &client->dev;
+
+        state = kzalloc(sizeof(struct example_state), GFP_KERNEL);
+        if (state == NULL) {
+                dev_err(dev, "failed to create our state\n");
+                return -ENOMEM;
+        }
+
+        state->client = client;
+        i2c_set_clientdata(client, state);
+
+        /* rest of the initialisation goes here. */
+
+        dev_info(dev, "example client created\n");
+
+        return 0;
+}
+
+static int __devexit example_remove(struct i2c_client *client)
+{
+        struct example_state *state = i2c_get_clientdata(client);
+
+        kfree(state);
+        return 0;
+}
+
+static struct i2c_device_id example_idtable[] = {
+        { "example", 0 },
+        { }
+};
+
+MODULE_DEVICE_TABLE(i2c, example_idtable);
+
+static struct i2c_driver example_driver = {
+        .driver         = {
+                .owner          = THIS_MODULE,
+                .name           = "example",
+        },
+        .id_table       = example_idtable,
+        .probe          = example_probe,
+        .remove         = __devexit_p(example_remove),
+        .suspend        = example_suspend,
+        .resume         = example_resume,
+};
diff --git a/Documentation/kdump/kdump.txt b/Documentation/kdump/kdump.txt
index 9691c7f5166c..0705040531a5 100644
--- a/Documentation/kdump/kdump.txt
+++ b/Documentation/kdump/kdump.txt
@@ -65,26 +65,26 @@ Install kexec-tools
 
 2) Download the kexec-tools user-space package from the following URL:
 
-http://www.kernel.org/pub/linux/kernel/people/horms/kexec-tools/kexec-tools-testing.tar.gz
+http://www.kernel.org/pub/linux/kernel/people/horms/kexec-tools/kexec-tools.tar.gz
 
-This is a symlink to the latest version, which at the time of writing is
-20061214, the only release of kexec-tools-testing so far. As other versions
-are released, the older ones will remain available at
-http://www.kernel.org/pub/linux/kernel/people/horms/kexec-tools/
+This is a symlink to the latest version.
 
-Note: Latest kexec-tools-testing git tree is available at
+The latest kexec-tools git tree is available at:
 
-git://git.kernel.org/pub/scm/linux/kernel/git/horms/kexec-tools-testing.git
+git://git.kernel.org/pub/scm/linux/kernel/git/horms/kexec-tools.git
 or
-http://www.kernel.org/git/?p=linux/kernel/git/horms/kexec-tools-testing.git;a=summary
+http://www.kernel.org/git/?p=linux/kernel/git/horms/kexec-tools.git
+
+More information about kexec-tools can be found at
+http://www.kernel.org/pub/linux/kernel/people/horms/kexec-tools/README.html
 
 3) Unpack the tarball with the tar command, as follows:
 
-   tar xvpzf kexec-tools-testing.tar.gz
+   tar xvpzf kexec-tools.tar.gz
 
 4) Change to the kexec-tools directory, as follows:
 
-   cd kexec-tools-testing-VERSION
+   cd kexec-tools-VERSION
 
 5) Configure the package, as follows:
 
diff --git a/Documentation/lguest/lguest.c b/Documentation/lguest/lguest.c
index 82fafe0429fe..b88b0ea54e90 100644
--- a/Documentation/lguest/lguest.c
+++ b/Documentation/lguest/lguest.c
@@ -36,11 +36,13 @@
 #include <sched.h>
 #include <limits.h>
 #include <stddef.h>
+#include <signal.h>
 #include "linux/lguest_launcher.h"
 #include "linux/virtio_config.h"
 #include "linux/virtio_net.h"
 #include "linux/virtio_blk.h"
 #include "linux/virtio_console.h"
+#include "linux/virtio_rng.h"
 #include "linux/virtio_ring.h"
 #include "asm-x86/bootparam.h"
 /*L:110 We can ignore the 39 include files we need for this program, but I do
@@ -64,8 +66,8 @@ typedef uint8_t u8;
 #endif
 /* We can have up to 256 pages for devices. */
 #define DEVICE_PAGES 256
-/* This will occupy 2 pages: it must be a power of 2. */
-#define VIRTQUEUE_NUM 128
+/* This will occupy 3 pages: it must be a power of 2. */
+#define VIRTQUEUE_NUM 256
 
 /*L:120 verbose is both a global flag and a macro.  The C preprocessor allows
  * this, and although I wouldn't recommend it, it works quite nicely here. */
@@ -74,12 +76,19 @@ static bool verbose;
         do { if (verbose) printf(args); } while(0)
 /*:*/
 
-/* The pipe to send commands to the waker process */
-static int waker_fd;
+/* File descriptors for the Waker. */
+struct {
+        int pipe[2];
+        int lguest_fd;
+} waker_fds;
+
 /* The pointer to the start of guest memory. */
 static void *guest_base;
 /* The maximum guest physical address allowed, and maximum possible. */
 static unsigned long guest_limit, guest_max;
+/* The pipe for signal hander to write to. */
+static int timeoutpipe[2];
+static unsigned int timeout_usec = 500;
 
 /* a per-cpu variable indicating whose vcpu is currently running */
 static unsigned int __thread cpu_id;
@@ -155,11 +164,14 @@ struct virtqueue
         /* Last available index we saw. */
         u16 last_avail_idx;
 
-        /* The routine to call when the Guest pings us. */
-        void (*handle_output)(int fd, struct virtqueue *me);
+        /* The routine to call when the Guest pings us, or timeout. */
+        void (*handle_output)(int fd, struct virtqueue *me, bool timeout);
 
         /* Outstanding buffers */
         unsigned int inflight;
+
+        /* Is this blocked awaiting a timer? */
+        bool blocked;
 };
 
 /* Remember the arguments to the program so we can "reboot" */
@@ -190,6 +202,9 @@ static void *_convert(struct iovec *iov, size_t size, size_t align,
         return iov->iov_base;
 }
 
+/* Wrapper for the last available index.  Makes it easier to change. */
+#define lg_last_avail(vq)       ((vq)->last_avail_idx)
+
 /* The virtio configuration space is defined to be little-endian.  x86 is
  * little-endian too, but it's nice to be explicit so we have these helpers. */
 #define cpu_to_le16(v16) (v16)
@@ -199,6 +214,33 @@ static void *_convert(struct iovec *iov, size_t size, size_t align,
 #define le32_to_cpu(v32) (v32)
 #define le64_to_cpu(v64) (v64)
 
+/* Is this iovec empty? */
+static bool iov_empty(const struct iovec iov[], unsigned int num_iov)
+{
+        unsigned int i;
+
+        for (i = 0; i < num_iov; i++)
+                if (iov[i].iov_len)
+                        return false;
+        return true;
+}
+
+/* Take len bytes from the front of this iovec. */
+static void iov_consume(struct iovec iov[], unsigned num_iov, unsigned len)
+{
+        unsigned int i;
+
+        for (i = 0; i < num_iov; i++) {
+                unsigned int used;
+
+                used = iov[i].iov_len < len ? iov[i].iov_len : len;
+                iov[i].iov_base += used;
+                iov[i].iov_len -= used;
+                len -= used;
+        }
+        assert(len == 0);
+}
+
 /* The device virtqueue descriptors are followed by feature bitmasks. */
 static u8 *get_feature_bits(struct device *dev)
 {
@@ -254,6 +296,7 @@ static void *map_zeroed_pages(unsigned int num)
                     PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE, fd, 0);
         if (addr == MAP_FAILED)
                 err(1, "Mmaping %u pages of /dev/zero", num);
+        close(fd);
 
         return addr;
 }
@@ -540,69 +583,64 @@ static void add_device_fd(int fd)
  * watch, but handing a file descriptor mask through to the kernel is fairly
  * icky.
  *
- * Instead, we fork off a process which watches the file descriptors and writes
+ * Instead, we clone off a thread which watches the file descriptors and writes
  * the LHREQ_BREAK command to the /dev/lguest file descriptor to tell the Host
  * stop running the Guest.  This causes the Launcher to return from the
  * /dev/lguest read with -EAGAIN, where it will write to /dev/lguest to reset
  * the LHREQ_BREAK and wake us up again.
  *
  * This, of course, is merely a different *kind* of icky.
+ *
+ * Given my well-known antipathy to threads, I'd prefer to use processes.  But
+ * it's easier to share Guest memory with threads, and trivial to share the
+ * devices.infds as the Launcher changes it.
  */
-static void wake_parent(int pipefd, int lguest_fd)
+static int waker(void *unused)
 {
-        /* Add the pipe from the Launcher to the fdset in the device_list, so
-         * we watch it, too. */
-        add_device_fd(pipefd);
+        /* Close the write end of the pipe: only the Launcher has it open. */
+        close(waker_fds.pipe[1]);
 
         for (;;) {
                 fd_set rfds = devices.infds;
                 unsigned long args[] = { LHREQ_BREAK, 1 };
+                unsigned int maxfd = devices.max_infd;
+
+                /* We also listen to the pipe from the Launcher. */
+                FD_SET(waker_fds.pipe[0], &rfds);
+                if (waker_fds.pipe[0] > maxfd)
+                        maxfd = waker_fds.pipe[0];
 
                 /* Wait until input is ready from one of the devices. */
-                select(devices.max_infd+1, &rfds, NULL, NULL, NULL);
-                /* Is it a message from the Launcher? */
-                if (FD_ISSET(pipefd, &rfds)) {
-                        int fd;
-                        /* If read() returns 0, it means the Launcher has
-                         * exited.  We silently follow. */
-                        if (read(pipefd, &fd, sizeof(fd)) == 0)
-                                exit(0);
-                        /* Otherwise it's telling us to change what file
-                         * descriptors we're to listen to.  Positive means
-                         * listen to a new one, negative means stop
-                         * listening. */
-                        if (fd >= 0)
-                                FD_SET(fd, &devices.infds);
-                        else
-                                FD_CLR(-fd - 1, &devices.infds);
-                } else /* Send LHREQ_BREAK command. */
-                        pwrite(lguest_fd, args, sizeof(args), cpu_id);
+                select(maxfd+1, &rfds, NULL, NULL, NULL);
+
+                /* Message from Launcher? */
+                if (FD_ISSET(waker_fds.pipe[0], &rfds)) {
+                        char c;
+                        /* If this fails, then assume Launcher has exited.
+                         * Don't do anything on exit: we're just a thread! */
+                        if (read(waker_fds.pipe[0], &c, 1) != 1)
+                                _exit(0);
+                        continue;
+                }
+
+                /* Send LHREQ_BREAK command to snap the Launcher out of it. */
+                pwrite(waker_fds.lguest_fd, args, sizeof(args), cpu_id);
         }
+        return 0;
 }
 
 /* This routine just sets up a pipe to the Waker process. */
-static int setup_waker(int lguest_fd)
-{
-        int pipefd[2], child;
-
-        /* We create a pipe to talk to the Waker, and also so it knows when the
-         * Launcher dies (and closes pipe). */
-        pipe(pipefd);
-        child = fork();
-        if (child == -1)
-                err(1, "forking");
-
-        if (child == 0) {
-                /* We are the Waker: close the "writing" end of our copy of the
-                 * pipe and start waiting for input. */
-                close(pipefd[1]);
-                wake_parent(pipefd[0], lguest_fd);
-        }
-        /* Close the reading end of our copy of the pipe. */
-        close(pipefd[0]);
+static void setup_waker(int lguest_fd)
+{
+        /* This pipe is closed when Launcher dies, telling Waker. */
+        if (pipe(waker_fds.pipe) != 0)
+                err(1, "Creating pipe for Waker");
 
-        /* Here is the fd used to talk to the waker. */
-        return pipefd[1];
+        /* Waker also needs to know the lguest fd */
+        waker_fds.lguest_fd = lguest_fd;
+
+        if (clone(waker, malloc(4096) + 4096, CLONE_VM | SIGCHLD, NULL) == -1)
+                err(1, "Creating Waker");
 }
 
 /*
@@ -661,19 +699,22 @@ static unsigned get_vq_desc(struct virtqueue *vq,
                             unsigned int *out_num, unsigned int *in_num)
 {
         unsigned int i, head;
+        u16 last_avail;
 
         /* Check it isn't doing very strange things with descriptor numbers. */
-        if ((u16)(vq->vring.avail->idx - vq->last_avail_idx) > vq->vring.num)
+        last_avail = lg_last_avail(vq);
+        if ((u16)(vq->vring.avail->idx - last_avail) > vq->vring.num)
                 errx(1, "Guest moved used index from %u to %u",
-                     vq->last_avail_idx, vq->vring.avail->idx);
+                     last_avail, vq->vring.avail->idx);
 
         /* If there's nothing new since last we looked, return invalid. */
-        if (vq->vring.avail->idx == vq->last_avail_idx)
+        if (vq->vring.avail->idx == last_avail)
                 return vq->vring.num;
 
         /* Grab the next descriptor number they're advertising, and increment
          * the index we've seen. */
-        head = vq->vring.avail->ring[vq->last_avail_idx++ % vq->vring.num];
+        head = vq->vring.avail->ring[last_avail % vq->vring.num];
+        lg_last_avail(vq)++;
 
         /* If their number is silly, that's a fatal mistake. */
         if (head >= vq->vring.num)
@@ -821,8 +862,8 @@ static bool handle_console_input(int fd, struct device *dev)
                                 unsigned long args[] = { LHREQ_BREAK, 0 };
                                 /* Close the fd so Waker will know it has to
                                  * exit. */
-                                close(waker_fd);
-                                /* Just in case waker is blocked in BREAK, send
+                                close(waker_fds.pipe[1]);
+                                /* Just in case Waker is blocked in BREAK, send
                                  * unbreak now. */
                                 write(fd, args, sizeof(args));
                                 exit(2);
@@ -839,7 +880,7 @@ static bool handle_console_input(int fd, struct device *dev)
 
 /* Handling output for console is simple: we just get all the output buffers
  * and write them to stdout. */
-static void handle_console_output(int fd, struct virtqueue *vq)
+static void handle_console_output(int fd, struct virtqueue *vq, bool timeout)
 {
         unsigned int head, out, in;
         int len;
@@ -854,6 +895,21 @@ static void handle_console_output(int fd, struct virtqueue *vq)
         }
 }
 
+static void block_vq(struct virtqueue *vq)
+{
+        struct itimerval itm;
+
+        vq->vring.used->flags |= VRING_USED_F_NO_NOTIFY;
+        vq->blocked = true;
+
+        itm.it_interval.tv_sec = 0;
+        itm.it_interval.tv_usec = 0;
+        itm.it_value.tv_sec = 0;
+        itm.it_value.tv_usec = timeout_usec;
+
+        setitimer(ITIMER_REAL, &itm, NULL);
+}
+
 /*
  * The Network
  *
@@ -861,22 +917,34 @@ static void handle_console_output(int fd, struct virtqueue *vq)
  * and write them (ignoring the first element) to this device's file descriptor
  * (/dev/net/tun).
  */
-static void handle_net_output(int fd, struct virtqueue *vq)
+static void handle_net_output(int fd, struct virtqueue *vq, bool timeout)
 {
-        unsigned int head, out, in;
+        unsigned int head, out, in, num = 0;
         int len;
         struct iovec iov[vq->vring.num];
+        static int last_timeout_num;
 
         /* Keep getting output buffers from the Guest until we run out. */
         while ((head = get_vq_desc(vq, iov, &out, &in)) != vq->vring.num) {
                 if (in)
                         errx(1, "Input buffers in output queue?");
-                /* Check header, but otherwise ignore it (we told the Guest we
-                 * supported no features, so it shouldn't have anything
-                 * interesting). */
-                (void)convert(&iov[0], struct virtio_net_hdr);
-                len = writev(vq->dev->fd, iov+1, out-1);
+                len = writev(vq->dev->fd, iov, out);
+                if (len < 0)
+                        err(1, "Writing network packet to tun");
                 add_used_and_trigger(fd, vq, head, len);
+                num++;
+        }
+
+        /* Block further kicks and set up a timer if we saw anything. */
+        if (!timeout && num)
+                block_vq(vq);
+
+        if (timeout) {
+                if (num < last_timeout_num)
+                        timeout_usec += 10;
+                else if (timeout_usec > 1)
+                        timeout_usec--;
+                last_timeout_num = num;
         }
 }
 
@@ -887,7 +955,6 @@ static bool handle_tun_input(int fd, struct device *dev)
         unsigned int head, in_num, out_num;
         int len;
         struct iovec iov[dev->vq->vring.num];
-        struct virtio_net_hdr *hdr;
 
         /* First we need a network buffer from the Guests's recv virtqueue. */
         head = get_vq_desc(dev->vq, iov, &out_num, &in_num);
@@ -896,25 +963,23 @@ static bool handle_tun_input(int fd, struct device *dev)
                  * early, the Guest won't be ready yet.  Wait until the device
                  * status says it's ready. */
                 /* FIXME: Actually want DRIVER_ACTIVE here. */
-                if (dev->desc->status & VIRTIO_CONFIG_S_DRIVER_OK)
-                        warn("network: no dma buffer!");
+
+                /* Now tell it we want to know if new things appear. */
+                dev->vq->vring.used->flags &= ~VRING_USED_F_NO_NOTIFY;
+                wmb();
+
                 /* We'll turn this back on if input buffers are registered. */
                 return false;
         } else if (out_num)
                 errx(1, "Output buffers in network recv queue?");
 
-        /* First element is the header: we set it to 0 (no features). */
-        hdr = convert(&iov[0], struct virtio_net_hdr);
-        hdr->flags = 0;
-        hdr->gso_type = VIRTIO_NET_HDR_GSO_NONE;
-
         /* Read the packet from the device directly into the Guest's buffer. */
-        len = readv(dev->fd, iov+1, in_num-1);
+        len = readv(dev->fd, iov, in_num);
         if (len <= 0)
                 err(1, "reading network");
 
         /* Tell the Guest about the new packet. */
-        add_used_and_trigger(fd, dev->vq, head, sizeof(*hdr) + len);
+        add_used_and_trigger(fd, dev->vq, head, len);
 
         verbose("tun input packet len %i [%02x %02x] (%s)\n", len,
                 ((u8 *)iov[1].iov_base)[0], ((u8 *)iov[1].iov_base)[1],
@@ -927,11 +992,18 @@ static bool handle_tun_input(int fd, struct device *dev)
 /*L:215 This is the callback attached to the network and console input
  * virtqueues: it ensures we try again, in case we stopped console or net
  * delivery because Guest didn't have any buffers. */
-static void enable_fd(int fd, struct virtqueue *vq)
+static void enable_fd(int fd, struct virtqueue *vq, bool timeout)
 {
         add_device_fd(vq->dev->fd);
-        /* Tell waker to listen to it again */
-        write(waker_fd, &vq->dev->fd, sizeof(vq->dev->fd));
+        /* Snap the Waker out of its select loop. */
+        write(waker_fds.pipe[1], "", 1);
+}
+
+static void net_enable_fd(int fd, struct virtqueue *vq, bool timeout)
+{
+        /* We don't need to know again when Guest refills receive buffer. */
+        vq->vring.used->flags |= VRING_USED_F_NO_NOTIFY;
+        enable_fd(fd, vq, timeout);
 }
 
 /* When the Guest tells us they updated the status field, we handle it. */
@@ -951,7 +1023,7 @@ static void update_device_status(struct device *dev)
                 for (vq = dev->vq; vq; vq = vq->next) {
                         memset(vq->vring.desc, 0,
                                vring_size(vq->config.num, getpagesize()));
-                        vq->last_avail_idx = 0;
+                        lg_last_avail(vq) = 0;
                 }
         } else if (dev->desc->status & VIRTIO_CONFIG_S_FAILED) {
                 warnx("Device %s configuration FAILED", dev->name);
@@ -960,10 +1032,10 @@ static void update_device_status(struct device *dev)
 
                 verbose("Device %s OK: offered", dev->name);
                 for (i = 0; i < dev->desc->feature_len; i++)
-                        verbose(" %08x", get_feature_bits(dev)[i]);
+                        verbose(" %02x", get_feature_bits(dev)[i]);
                 verbose(", accepted");
                 for (i = 0; i < dev->desc->feature_len; i++)
-                        verbose(" %08x", get_feature_bits(dev)
+                        verbose(" %02x", get_feature_bits(dev)
                                 [dev->desc->feature_len+i]);
 
                 if (dev->ready)
@@ -1000,7 +1072,7 @@ static void handle_output(int fd, unsigned long addr)
                         if (strcmp(vq->dev->name, "console") != 0)
                                 verbose("Output to %s\n", vq->dev->name);
                         if (vq->handle_output)
-                                vq->handle_output(fd, vq);
+                                vq->handle_output(fd, vq, false);
                         return;
                 }
         }
@@ -1014,6 +1086,29 @@ static void handle_output(int fd, unsigned long addr)
               strnlen(from_guest_phys(addr), guest_limit - addr));
 }
 
+static void handle_timeout(int fd)
+{
+        char buf[32];
+        struct device *i;
+        struct virtqueue *vq;
+
+        /* Clear the pipe */
+        read(timeoutpipe[0], buf, sizeof(buf));
+
+        /* Check each device and virtqueue: flush blocked ones. */
+        for (i = devices.dev; i; i = i->next) {
+                for (vq = i->vq; vq; vq = vq->next) {
+                        if (!vq->blocked)
+                                continue;
+
+                        vq->vring.used->flags &= ~VRING_USED_F_NO_NOTIFY;
+                        vq->blocked = false;
+                        if (vq->handle_output)
+                                vq->handle_output(fd, vq, true);
+                }
+        }
+}
+
 /* This is called when the Waker wakes us up: check for incoming file
  * descriptors. */
 static void handle_input(int fd)
@@ -1024,16 +1119,20 @@ static void handle_input(int fd)
         for (;;) {
                 struct device *i;
                 fd_set fds = devices.infds;
+                int num;
 
+                num = select(devices.max_infd+1, &fds, NULL, NULL, &poll);
+                /* Could get interrupted */
+                if (num < 0)
+                        continue;
                 /* If nothing is ready, we're done. */
-                if (select(devices.max_infd+1, &fds, NULL, NULL, &poll) == 0)
+                if (num == 0)
                         break;
 
                 /* Otherwise, call the device(s) which have readable file
                  * descriptors and a method of handling them.  */
                 for (i = devices.dev; i; i = i->next) {
                         if (i->handle_input && FD_ISSET(i->fd, &fds)) {
-                                int dev_fd;
                                 if (i->handle_input(fd, i))
                                         continue;
 
@@ -1043,13 +1142,12 @@ static void handle_input(int fd)
                                  * buffers to deliver into.  Console also uses
                                  * it when it discovers that stdin is closed. */
                                 FD_CLR(i->fd, &devices.infds);
-                                /* Tell waker to ignore it too, by sending a
-                                 * negative fd number (-1, since 0 is a valid
-                                 * FD number). */
-                                dev_fd = -i->fd - 1;
-                                write(waker_fd, &dev_fd, sizeof(dev_fd));
                         }
                 }
+
+                /* Is this the timeout fd? */
+                if (FD_ISSET(timeoutpipe[0], &fds))
+                        handle_timeout(fd);
         }
 }
 
@@ -1098,7 +1196,7 @@ static struct lguest_device_desc *new_dev_desc(u16 type)
 /* Each device descriptor is followed by the description of its virtqueues.  We
  * specify how many descriptors the virtqueue is to have. */
 static void add_virtqueue(struct device *dev, unsigned int num_descs,
-                          void (*handle_output)(int fd, struct virtqueue *me))
+                          void (*handle_output)(int, struct virtqueue *, bool))
 {
         unsigned int pages;
         struct virtqueue **i, *vq = malloc(sizeof(*vq));
@@ -1114,6 +1212,7 @@ static void add_virtqueue(struct device *dev, unsigned int num_descs,
         vq->last_avail_idx = 0;
         vq->dev = dev;
         vq->inflight = 0;
+        vq->blocked = false;
 
         /* Initialize the configuration. */
         vq->config.num = num_descs;
@@ -1246,6 +1345,24 @@ static void setup_console(void)
 }
 /*:*/
 
+static void timeout_alarm(int sig)
+{
+        write(timeoutpipe[1], "", 1);
+}
+
+static void setup_timeout(void)
+{
+        if (pipe(timeoutpipe) != 0)
+                err(1, "Creating timeout pipe");
+
+        if (fcntl(timeoutpipe[1], F_SETFL,
+                  fcntl(timeoutpipe[1], F_GETFL) | O_NONBLOCK) != 0)
+                err(1, "Making timeout pipe nonblocking");
+
+        add_device_fd(timeoutpipe[0]);
+        signal(SIGALRM, timeout_alarm);
+}
+
 /*M:010 Inter-guest networking is an interesting area.  Simplest is to have a
  * --sharenet=<name> option which opens or creates a named pipe.  This can be
  * used to send packets to another guest in a 1:1 manner.
@@ -1264,10 +1381,25 @@ static void setup_console(void)
 
 static u32 str2ip(const char *ipaddr)
 {
-        unsigned int byte[4];
+        unsigned int b[4];
 
-        sscanf(ipaddr, "%u.%u.%u.%u", &byte[0], &byte[1], &byte[2], &byte[3]);
-        return (byte[0] << 24) | (byte[1] << 16) | (byte[2] << 8) | byte[3];
+        if (sscanf(ipaddr, "%u.%u.%u.%u", &b[0], &b[1], &b[2], &b[3]) != 4)
+                errx(1, "Failed to parse IP address '%s'", ipaddr);
+        return (b[0] << 24) | (b[1] << 16) | (b[2] << 8) | b[3];
+}
+
+static void str2mac(const char *macaddr, unsigned char mac[6])
+{
+        unsigned int m[6];
+        if (sscanf(macaddr, "%02x:%02x:%02x:%02x:%02x:%02x",
+                   &m[0], &m[1], &m[2], &m[3], &m[4], &m[5]) != 6)
+                errx(1, "Failed to parse mac address '%s'", macaddr);
+        mac[0] = m[0];
+        mac[1] = m[1];
+        mac[2] = m[2];
+        mac[3] = m[3];
+        mac[4] = m[4];
+        mac[5] = m[5];
 }
 
 /* This code is "adapted" from libbridge: it attaches the Host end of the
@@ -1288,6 +1420,7 @@ static void add_to_bridge(int fd, const char *if_name, const char *br_name)
                 errx(1, "interface %s does not exist!", if_name);
 
         strncpy(ifr.ifr_name, br_name, IFNAMSIZ);
+        ifr.ifr_name[IFNAMSIZ-1] = '\0';
         ifr.ifr_ifindex = ifidx;
         if (ioctl(fd, SIOCBRADDIF, &ifr) < 0)
                 err(1, "can't add %s to bridge %s", if_name, br_name);
@@ -1296,64 +1429,90 @@ static void add_to_bridge(int fd, const char *if_name, const char *br_name)
 /* This sets up the Host end of the network device with an IP address, brings
  * it up so packets will flow, the copies the MAC address into the hwaddr
  * pointer. */
-static void configure_device(int fd, const char *devname, u32 ipaddr,
-                             unsigned char hwaddr[6])
+static void configure_device(int fd, const char *tapif, u32 ipaddr)
 {
         struct ifreq ifr;
         struct sockaddr_in *sin = (struct sockaddr_in *)&ifr.ifr_addr;
 
-        /* Don't read these incantations.  Just cut & paste them like I did! */
         memset(&ifr, 0, sizeof(ifr));
-        strcpy(ifr.ifr_name, devname);
+        strcpy(ifr.ifr_name, tapif);
+
+        /* Don't read these incantations.  Just cut & paste them like I did! */
         sin->sin_family = AF_INET;
         sin->sin_addr.s_addr = htonl(ipaddr);
         if (ioctl(fd, SIOCSIFADDR, &ifr) != 0)
-                err(1, "Setting %s interface address", devname);
+                err(1, "Setting %s interface address", tapif);
         ifr.ifr_flags = IFF_UP;
         if (ioctl(fd, SIOCSIFFLAGS, &ifr) != 0)
-                err(1, "Bringing interface %s up", devname);
+                err(1, "Bringing interface %s up", tapif);
+}
+
+static void get_mac(int fd, const char *tapif, unsigned char hwaddr[6])
+{
+        struct ifreq ifr;
+
+        memset(&ifr, 0, sizeof(ifr));
+        strcpy(ifr.ifr_name, tapif);
 
         /* SIOC stands for Socket I/O Control.  G means Get (vs S for Set
          * above).  IF means Interface, and HWADDR is hardware address.
          * Simple! */
         if (ioctl(fd, SIOCGIFHWADDR, &ifr) != 0)
-                err(1, "getting hw address for %s", devname);
+                err(1, "getting hw address for %s", tapif);
         memcpy(hwaddr, ifr.ifr_hwaddr.sa_data, 6);
 }
 
-/*L:195 Our network is a Host<->Guest network.  This can either use bridging or
- * routing, but the principle is the same: it uses the "tun" device to inject
- * packets into the Host as if they came in from a normal network card.  We
- * just shunt packets between the Guest and the tun device. */
-static void setup_tun_net(const char *arg)
+static int get_tun_device(char tapif[IFNAMSIZ])
 {
-        struct device *dev;
         struct ifreq ifr;
-        int netfd, ipfd;
-        u32 ip;
-        const char *br_name = NULL;
-        struct virtio_net_config conf;
+        int netfd;
+
+        /* Start with this zeroed.  Messy but sure. */
+        memset(&ifr, 0, sizeof(ifr));
 
         /* We open the /dev/net/tun device and tell it we want a tap device.  A
          * tap device is like a tun device, only somehow different.  To tell
          * the truth, I completely blundered my way through this code, but it
          * works now! */
         netfd = open_or_die("/dev/net/tun", O_RDWR);
-        memset(&ifr, 0, sizeof(ifr));
-        ifr.ifr_flags = IFF_TAP | IFF_NO_PI;
+        ifr.ifr_flags = IFF_TAP | IFF_NO_PI | IFF_VNET_HDR;
         strcpy(ifr.ifr_name, "tap%d");
         if (ioctl(netfd, TUNSETIFF, &ifr) != 0)
                 err(1, "configuring /dev/net/tun");
+
+        if (ioctl(netfd, TUNSETOFFLOAD,
+                  TUN_F_CSUM|TUN_F_TSO4|TUN_F_TSO6|TUN_F_TSO_ECN) != 0)
+                err(1, "Could not set features for tun device");
+
         /* We don't need checksums calculated for packets coming in this
          * device: trust us! */
         ioctl(netfd, TUNSETNOCSUM, 1);
 
+        memcpy(tapif, ifr.ifr_name, IFNAMSIZ);
+        return netfd;
+}
+
+/*L:195 Our network is a Host<->Guest network.  This can either use bridging or
+ * routing, but the principle is the same: it uses the "tun" device to inject
+ * packets into the Host as if they came in from a normal network card.  We
+ * just shunt packets between the Guest and the tun device. */
+static void setup_tun_net(char *arg)
+{
+        struct device *dev;
+        int netfd, ipfd;
+        u32 ip = INADDR_ANY;
+        bool bridging = false;
+        char tapif[IFNAMSIZ], *p;
+        struct virtio_net_config conf;
+
+        netfd = get_tun_device(tapif);
+
         /* First we create a new network device. */
         dev = new_device("net", VIRTIO_ID_NET, netfd, handle_tun_input);
 
         /* Network devices need a receive and a send queue, just like
          * console. */
-        add_virtqueue(dev, VIRTQUEUE_NUM, enable_fd);
+        add_virtqueue(dev, VIRTQUEUE_NUM, net_enable_fd);
         add_virtqueue(dev, VIRTQUEUE_NUM, handle_net_output);
 
         /* We need a socket to perform the magic network ioctls to bring up the
@@ -1364,28 +1523,56 @@ static void setup_tun_net(const char *arg)
 
         /* If the command line was --tunnet=bridge:<name> do bridging. */
         if (!strncmp(BRIDGE_PFX, arg, strlen(BRIDGE_PFX))) {
-                ip = INADDR_ANY;
-                br_name = arg + strlen(BRIDGE_PFX);
-                add_to_bridge(ipfd, ifr.ifr_name, br_name);
-        } else /* It is an IP address to set up the device with */
+                arg += strlen(BRIDGE_PFX);
+                bridging = true;
+        }
+
+        /* A mac address may follow the bridge name or IP address */
+        p = strchr(arg, ':');
+        if (p) {
+                str2mac(p+1, conf.mac);
+                *p = '\0';
+        } else {
+                p = arg + strlen(arg);
+                /* None supplied; query the randomly assigned mac. */
+                get_mac(ipfd, tapif, conf.mac);
+        }
+
+        /* arg is now either an IP address or a bridge name */
+        if (bridging)
+                add_to_bridge(ipfd, tapif, arg);
+        else
                 ip = str2ip(arg);
 
-        /* Set up the tun device, and get the mac address for the interface. */
-        configure_device(ipfd, ifr.ifr_name, ip, conf.mac);
+        /* Set up the tun device. */
+        configure_device(ipfd, tapif, ip);
 
         /* Tell Guest what MAC address to use. */
         add_feature(dev, VIRTIO_NET_F_MAC);
         add_feature(dev, VIRTIO_F_NOTIFY_ON_EMPTY);
+        /* Expect Guest to handle everything except UFO */
+        add_feature(dev, VIRTIO_NET_F_CSUM);
+        add_feature(dev, VIRTIO_NET_F_GUEST_CSUM);
+        add_feature(dev, VIRTIO_NET_F_MAC);
+        add_feature(dev, VIRTIO_NET_F_GUEST_TSO4);
+        add_feature(dev, VIRTIO_NET_F_GUEST_TSO6);
+        add_feature(dev, VIRTIO_NET_F_GUEST_ECN);
+        add_feature(dev, VIRTIO_NET_F_HOST_TSO4);
+        add_feature(dev, VIRTIO_NET_F_HOST_TSO6);
+        add_feature(dev, VIRTIO_NET_F_HOST_ECN);
         set_config(dev, sizeof(conf), &conf);
 
         /* We don't need the socket any more; setup is done. */
         close(ipfd);
 
-        verbose("device %u: tun net %u.%u.%u.%u\n",
-                devices.device_num++,
-                (u8)(ip>>24),(u8)(ip>>16),(u8)(ip>>8),(u8)ip);
-        if (br_name)
-                verbose("attached to bridge: %s\n", br_name);
+        devices.device_num++;
+
+        if (bridging)
+                verbose("device %u: tun %s attached to bridge: %s\n",
+                        devices.device_num, tapif, arg);
+        else
+                verbose("device %u: tun %s: %s\n",
+                        devices.device_num, tapif, arg);
 }
 
 /* Our block (disk) device should be really simple: the Guest asks for a block
@@ -1550,7 +1737,7 @@ static bool handle_io_finish(int fd, struct device *dev)
 }
 
 /* When the Guest submits some I/O, we just need to wake the I/O thread. */
-static void handle_virtblk_output(int fd, struct virtqueue *vq)
+static void handle_virtblk_output(int fd, struct virtqueue *vq, bool timeout)
 {
         struct vblk_info *vblk = vq->dev->priv;
         char c = 0;
@@ -1621,6 +1808,64 @@ static void setup_block_file(const char *filename)
         verbose("device %u: virtblock %llu sectors\n",
                 devices.device_num, le64_to_cpu(conf.capacity));
 }
+
+/* Our random number generator device reads from /dev/random into the Guest's
+ * input buffers.  The usual case is that the Guest doesn't want random numbers
+ * and so has no buffers although /dev/random is still readable, whereas
+ * console is the reverse.
+ *
+ * The same logic applies, however. */
+static bool handle_rng_input(int fd, struct device *dev)
+{
+        int len;
+        unsigned int head, in_num, out_num, totlen = 0;
+        struct iovec iov[dev->vq->vring.num];
+
+        /* First we need a buffer from the Guests's virtqueue. */
+        head = get_vq_desc(dev->vq, iov, &out_num, &in_num);
+
+        /* If they're not ready for input, stop listening to this file
+         * descriptor.  We'll start again once they add an input buffer. */
+        if (head == dev->vq->vring.num)
+                return false;
+
+        if (out_num)
+                errx(1, "Output buffers in rng?");
+
+        /* This is why we convert to iovecs: the readv() call uses them, and so
+         * it reads straight into the Guest's buffer.  We loop to make sure we
+         * fill it. */
+        while (!iov_empty(iov, in_num)) {
+                len = readv(dev->fd, iov, in_num);
+                if (len <= 0)
+                        err(1, "Read from /dev/random gave %i", len);
+                iov_consume(iov, in_num, len);
+                totlen += len;
+        }
+
+        /* Tell the Guest about the new input. */
+        add_used_and_trigger(fd, dev->vq, head, totlen);
+
+        /* Everything went OK! */
+        return true;
+}
+
+/* And this creates a "hardware" random number device for the Guest. */
+static void setup_rng(void)
+{
+        struct device *dev;
+        int fd;
+
+        fd = open_or_die("/dev/random", O_RDONLY);
+
+        /* The device responds to return from I/O thread. */
+        dev = new_device("rng", VIRTIO_ID_RNG, fd, handle_rng_input);
+
+        /* The device has one virtqueue, where the Guest places inbufs. */
+        add_virtqueue(dev, VIRTQUEUE_NUM, enable_fd);
+
+        verbose("device %u: rng\n", devices.device_num++);
+}
 /* That's the end of device setup. */
 
 /*L:230 Reboot is pretty easy: clean up and exec() the Launcher afresh. */
@@ -1628,11 +1873,12 @@ static void __attribute__((noreturn)) restart_guest(void)
 {
         unsigned int i;
 
-        /* Closing pipes causes the Waker thread and io_threads to die, and
-         * closing /dev/lguest cleans up the Guest.  Since we don't track all
-         * open fds, we simply close everything beyond stderr. */
+        /* Since we don't track all open fds, we simply close everything beyond
+         * stderr. */
         for (i = 3; i < FD_SETSIZE; i++)
                 close(i);
+
+        /* The exec automatically gets rid of the I/O and Waker threads. */
         execv(main_args[0], main_args);
         err(1, "Could not exec %s", main_args[0]);
 }
@@ -1663,7 +1909,7 @@ static void __attribute__((noreturn)) run_guest(int lguest_fd)
                 /* ERESTART means that we need to reboot the guest */
                 } else if (errno == ERESTART) {
                         restart_guest();
-                /* EAGAIN means the Waker wanted us to look at some input.
+                /* EAGAIN means a signal (timeout).
                  * Anything else means a bug or incompatible change. */
                 } else if (errno != EAGAIN)
                         err(1, "Running guest failed");
@@ -1691,13 +1937,14 @@ static struct option opts[] = {
         { "verbose", 0, NULL, 'v' },
         { "tunnet", 1, NULL, 't' },
         { "block", 1, NULL, 'b' },
+        { "rng", 0, NULL, 'r' },
         { "initrd", 1, NULL, 'i' },
         { NULL },
 };
 static void usage(void)
 {
         errx(1, "Usage: lguest [--verbose] "
-             "[--tunnet=(<ipaddr>|bridge:<bridgename>)\n"
+             "[--tunnet=(<ipaddr>:<macaddr>|bridge:<bridgename>:<macaddr>)\n"
              "|--block=<filename>|--initrd=<filename>]...\n"
              "<mem-in-mb> vmlinux [args...]");
 }
@@ -1765,6 +2012,9 @@ int main(int argc, char *argv[])
                 case 'b':
                         setup_block_file(optarg);
                         break;
+                case 'r':
+                        setup_rng();
+                        break;
                 case 'i':
                         initrd_name = optarg;
                         break;
@@ -1783,6 +2033,9 @@ int main(int argc, char *argv[])
         /* We always have a console device */
         setup_console();
 
+        /* We can timeout waiting for Guest network transmit. */
+        setup_timeout();
+
         /* Now we load the kernel */
         start = load_kernel(open_or_die(argv[optind+1], O_RDONLY));
 
@@ -1826,10 +2079,10 @@ int main(int argc, char *argv[])
          * /dev/lguest file descriptor. */
         lguest_fd = tell_kernel(pgdir, start);
 
-        /* We fork off a child process, which wakes the Launcher whenever one
-         * of the input file descriptors needs attention.  We call this the
-         * Waker, and we'll cover it in a moment. */
-        waker_fd = setup_waker(lguest_fd);
+        /* We clone off a thread, which wakes the Launcher whenever one of the
+         * input file descriptors needs attention.  We call this the Waker, and
+         * we'll cover it in a moment. */
+        setup_waker(lguest_fd);
 
         /* Finally, run the Guest.  This doesn't return. */
         run_guest(lguest_fd);
diff --git a/Documentation/power/power_supply_class.txt b/Documentation/power/power_supply_class.txt
index a8686e5a6857..c6cd4956047c 100644
--- a/Documentation/power/power_supply_class.txt
+++ b/Documentation/power/power_supply_class.txt
@@ -101,6 +101,10 @@ of charge when battery became full/empty". It also could mean "value of
 charge when battery considered full/empty at given conditions (temperature,
 age)". I.e. these attributes represents real thresholds, not design values.
 
+CHARGE_COUNTER - the current charge counter (in µAh).  This could easily
+be negative; there is no empty or full value.  It is only useful for
+relative, time-based measurements.
+
 ENERGY_FULL, ENERGY_EMPTY - same as above but for energy.
 
 CAPACITY - capacity in percents.
diff --git a/Documentation/power/regulator/consumer.txt b/Documentation/power/regulator/consumer.txt
new file mode 100644
index 000000000000..82b7a43aadba
--- /dev/null
+++ b/Documentation/power/regulator/consumer.txt
@@ -0,0 +1,182 @@
+Regulator Consumer Driver Interface
+===================================
+
+This text describes the regulator interface for consumer device drivers.
+Please see overview.txt for a description of the terms used in this text.
+
+
+1. Consumer Regulator Access (static & dynamic drivers)
+=======================================================
+
+A consumer driver can get access to it's supply regulator by calling :-
+
+regulator = regulator_get(dev, "Vcc");
+
+The consumer passes in it's struct device pointer and power supply ID. The core
+then finds the correct regulator by consulting a machine specific lookup table.
+If the lookup is successful then this call will return a pointer to the struct
+regulator that supplies this consumer.
+
+To release the regulator the consumer driver should call :-
+
+regulator_put(regulator);
+
+Consumers can be supplied by more than one regulator e.g. codec consumer with
+analog and digital supplies :-
+
+digital = regulator_get(dev, "Vcc");  /* digital core */
+analog = regulator_get(dev, "Avdd");  /* analog */
+
+The regulator access functions regulator_get() and regulator_put() will
+usually be called in your device drivers probe() and remove() respectively.
+
+
+2. Regulator Output Enable & Disable (static & dynamic drivers)
+====================================================================
+
+A consumer can enable it's power supply by calling:-
+
+int regulator_enable(regulator);
+
+NOTE: The supply may already be enabled before regulator_enabled() is called.
+This may happen if the consumer shares the regulator or the regulator has been
+previously enabled by bootloader or kernel board initialization code.
+
+A consumer can determine if a regulator is enabled by calling :-
+
+int regulator_is_enabled(regulator);
+
+This will return > zero when the regulator is enabled.
+
+
+A consumer can disable it's supply when no longer needed by calling :-
+
+int regulator_disable(regulator);
+
+NOTE: This may not disable the supply if it's shared with other consumers. The
+regulator will only be disabled when the enabled reference count is zero.
+
+Finally, a regulator can be forcefully disabled in the case of an emergency :-
+
+int regulator_force_disable(regulator);
+
+NOTE: this will immediately and forcefully shutdown the regulator output. All
+consumers will be powered off.
+
+
+3. Regulator Voltage Control & Status (dynamic drivers)
+======================================================
+
+Some consumer drivers need to be able to dynamically change their supply
+voltage to match system operating points. e.g. CPUfreq drivers can scale
+voltage along with frequency to save power, SD drivers may need to select the
+correct card voltage, etc.
+
+Consumers can control their supply voltage by calling :-
+
+int regulator_set_voltage(regulator, min_uV, max_uV);
+
+Where min_uV and max_uV are the minimum and maximum acceptable voltages in
+microvolts.
+
+NOTE: this can be called when the regulator is enabled or disabled. If called
+when enabled, then the voltage changes instantly, otherwise the voltage
+configuration changes and the voltage is physically set when the regulator is
+next enabled.
+
+The regulators configured voltage output can be found by calling :-
+
+int regulator_get_voltage(regulator);
+
+NOTE: get_voltage() will return the configured output voltage whether the
+regulator is enabled or disabled and should NOT be used to determine regulator
+output state. However this can be used in conjunction with is_enabled() to
+determine the regulator physical output voltage.
+
+
+4. Regulator Current Limit Control & Status (dynamic drivers)
+===========================================================
+
+Some consumer drivers need to be able to dynamically change their supply
+current limit to match system operating points. e.g. LCD backlight driver can
+change the current limit to vary the backlight brightness, USB drivers may want
+to set the limit to 500mA when supplying power.
+
+Consumers can control their supply current limit by calling :-
+
+int regulator_set_current_limit(regulator, min_uV, max_uV);
+
+Where min_uA and max_uA are the minimum and maximum acceptable current limit in
+microamps.
+
+NOTE: this can be called when the regulator is enabled or disabled. If called
+when enabled, then the current limit changes instantly, otherwise the current
+limit configuration changes and the current limit is physically set when the
+regulator is next enabled.
+
+A regulators current limit can be found by calling :-
+
+int regulator_get_current_limit(regulator);
+
+NOTE: get_current_limit() will return the current limit whether the regulator
+is enabled or disabled and should not be used to determine regulator current
+load.
+
+
+5. Regulator Operating Mode Control & Status (dynamic drivers)
+=============================================================
+
+Some consumers can further save system power by changing the operating mode of
+their supply regulator to be more efficient when the consumers operating state
+changes. e.g. consumer driver is idle and subsequently draws less current
+
+Regulator operating mode can be changed indirectly or directly.
+
+Indirect operating mode control.
+--------------------------------
+Consumer drivers can request a change in their supply regulator operating mode
+by calling :-
+
+int regulator_set_optimum_mode(struct regulator *regulator, int load_uA);
+
+This will cause the core to recalculate the total load on the regulator (based
+on all it's consumers) and change operating mode (if necessary and permitted)
+to best match the current operating load.
+
+The load_uA value can be determined from the consumers datasheet. e.g.most
+datasheets have tables showing the max current consumed in certain situations.
+
+Most consumers will use indirect operating mode control since they have no
+knowledge of the regulator or whether the regulator is shared with other
+consumers.
+
+Direct operating mode control.
+------------------------------
+Bespoke or tightly coupled drivers may want to directly control regulator
+operating mode depending on their operating point. This can be achieved by
+calling :-
+
+int regulator_set_mode(struct regulator *regulator, unsigned int mode);
+unsigned int regulator_get_mode(struct regulator *regulator);
+
+Direct mode will only be used by consumers that *know* about the regulator and
+are not sharing the regulator with other consumers.
+
+
+6. Regulator Events
+===================
+Regulators can notify consumers of external events. Events could be received by
+consumers under regulator stress or failure conditions.
+
+Consumers can register interest in regulator events by calling :-
+
+int regulator_register_notifier(struct regulator *regulator,
+                              struct notifier_block *nb);
+
+Consumers can uregister interest by calling :-
+
+int regulator_unregister_notifier(struct regulator *regulator,
+                                struct notifier_block *nb);
+
+Regulators use the kernel notifier framework to send event to thier interested
+consumers.
diff --git a/Documentation/power/regulator/machine.txt b/Documentation/power/regulator/machine.txt
new file mode 100644
index 000000000000..c9a35665cf70
--- /dev/null
+++ b/Documentation/power/regulator/machine.txt
@@ -0,0 +1,101 @@
+Regulator Machine Driver Interface
+===================================
+
+The regulator machine driver interface is intended for board/machine specific
+initialisation code to configure the regulator subsystem. Typical things that
+machine drivers would do are :-
+
+ 1. Regulator -> Device mapping.
+ 2. Regulator supply configuration.
+ 3. Power Domain constraint setting.
+
+
+
+1. Regulator -> device mapping
+==============================
+Consider the following machine :-
+
+  Regulator-1 -+-> Regulator-2 --> [Consumer A @ 1.8 - 2.0V]
+               |
+               +-> [Consumer B @ 3.3V]
+
+The drivers for consumers A & B must be mapped to the correct regulator in
+order to control their power supply. This mapping can be achieved in machine
+initialisation code by calling :-
+
+int regulator_set_device_supply(const char *regulator, struct device *dev,
+                                const char *supply);
+
+and is shown with the following code :-
+
+regulator_set_device_supply("Regulator-1", devB, "Vcc");
+regulator_set_device_supply("Regulator-2", devA, "Vcc");
+
+This maps Regulator-1 to the 'Vcc' supply for Consumer B and maps Regulator-2
+to the 'Vcc' supply for Consumer A.
+
+
+2. Regulator supply configuration.
+==================================
+Consider the following machine (again) :-
+
+  Regulator-1 -+-> Regulator-2 --> [Consumer A @ 1.8 - 2.0V]
+               |
+               +-> [Consumer B @ 3.3V]
+
+Regulator-1 supplies power to Regulator-2. This relationship must be registered
+with the core so that Regulator-1 is also enabled when Consumer A enables it's
+supply (Regulator-2).
+
+This relationship can be register with the core via :-
+
+int regulator_set_supply(const char *regulator, const char *regulator_supply);
+
+In this example we would use the following code :-
+
+regulator_set_supply("Regulator-2", "Regulator-1");
+
+Relationships can be queried by calling :-
+
+const char *regulator_get_supply(const char *regulator);
+
+
+3. Power Domain constraint setting.
+===================================
+Each power domain within a system has physical constraints on voltage and
+current. This must be defined in software so that the power domain is always
+operated within specifications.
+
+Consider the following machine (again) :-
+
+  Regulator-1 -+-> Regulator-2 --> [Consumer A @ 1.8 - 2.0V]
+               |
+               +-> [Consumer B @ 3.3V]
+
+This gives us two regulators and two power domains:
+
+                   Domain 1: Regulator-2, Consumer B.
+                   Domain 2: Consumer A.
+
+Constraints can be registered by calling :-
+
+int regulator_set_platform_constraints(const char *regulator,
+        struct regulation_constraints *constraints);
+
+The example is defined as follows :-
+
+struct regulation_constraints domain_1 = {
+        .min_uV = 3300000,
+        .max_uV = 3300000,
+        .valid_modes_mask = REGULATOR_MODE_NORMAL,
+};
+
+struct regulation_constraints domain_2 = {
+        .min_uV = 1800000,
+        .max_uV = 2000000,
+        .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+        .valid_modes_mask = REGULATOR_MODE_NORMAL,
+};
+
+regulator_set_platform_constraints("Regulator-1", &domain_1);
+regulator_set_platform_constraints("Regulator-2", &domain_2);
diff --git a/Documentation/power/regulator/overview.txt b/Documentation/power/regulator/overview.txt
new file mode 100644
index 000000000000..bdcb332bd7fb
--- /dev/null
+++ b/Documentation/power/regulator/overview.txt
@@ -0,0 +1,171 @@
+Linux voltage and current regulator framework
+=============================================
+
+About
+=====
+
+This framework is designed to provide a standard kernel interface to control
+voltage and current regulators.
+
+The intention is to allow systems to dynamically control regulator power output
+in order to save power and prolong battery life. This applies to both voltage
+regulators (where voltage output is controllable) and current sinks (where
+current limit is controllable).
+
+(C) 2008  Wolfson Microelectronics PLC.
+Author: Liam Girdwood <lg@opensource.wolfsonmicro.com>
+
+
+Nomenclature
+============
+
+Some terms used in this document:-
+
+  o Regulator    - Electronic device that supplies power to other devices.
+                   Most regulators can enable and disable their output whilst
+                   some can control their output voltage and or current.
+
+                   Input Voltage -> Regulator -> Output Voltage
+
+
+  o PMIC         - Power Management IC. An IC that contains numerous regulators
+                   and often contains other susbsystems.
+
+
+  o Consumer     - Electronic device that is supplied power by a regulator.
+                   Consumers can be classified into two types:-
+
+                   Static: consumer does not change it's supply voltage or
+                   current limit. It only needs to enable or disable it's
+                   power supply. It's supply voltage is set by the hardware,
+                   bootloader, firmware or kernel board initialisation code.
+
+                   Dynamic: consumer needs to change it's supply voltage or
+                   current limit to meet operation demands.
+
+
+  o Power Domain - Electronic circuit that is supplied it's input power by the
+                   output power of a regulator, switch or by another power
+                   domain.
+
+                   The supply regulator may be behind a switch(s). i.e.
+
+                   Regulator -+-> Switch-1 -+-> Switch-2 --> [Consumer A]
+                              |             |
+                              |             +-> [Consumer B], [Consumer C]
+                              |
+                              +-> [Consumer D], [Consumer E]
+
+                   That is one regulator and three power domains:
+
+                   Domain 1: Switch-1, Consumers D & E.
+                   Domain 2: Switch-2, Consumers B & C.
+                   Domain 3: Consumer A.
+
+                   and this represents a "supplies" relationship:
+
+                   Domain-1 --> Domain-2 --> Domain-3.
+
+                   A power domain may have regulators that are supplied power
+                   by other regulators. i.e.
+
+                   Regulator-1 -+-> Regulator-2 -+-> [Consumer A]
+                                |
+                                +-> [Consumer B]
+
+                   This gives us two regulators and two power domains:
+
+                   Domain 1: Regulator-2, Consumer B.
+                   Domain 2: Consumer A.
+
+                   and a "supplies" relationship:
+
+                   Domain-1 --> Domain-2
+
+
+  o Constraints  - Constraints are used to define power levels for performance
+                   and hardware protection. Constraints exist at three levels:
+
+                   Regulator Level: This is defined by the regulator hardware
+                   operating parameters and is specified in the regulator
+                   datasheet. i.e.
+
+                     - voltage output is in the range 800mV -> 3500mV.
+                     - regulator current output limit is 20mA @ 5V but is
+                       10mA @ 10V.
+
+                   Power Domain Level: This is defined in software by kernel
+                   level board initialisation code. It is used to constrain a
+                   power domain to a particular power range. i.e.
+
+                     - Domain-1 voltage is 3300mV
+                     - Domain-2 voltage is 1400mV -> 1600mV
+                     - Domain-3 current limit is 0mA -> 20mA.
+
+                   Consumer Level: This is defined by consumer drivers
+                   dynamically setting voltage or current limit levels.
+
+                   e.g. a consumer backlight driver asks for a current increase
+                   from 5mA to 10mA to increase LCD illumination. This passes
+                   to through the levels as follows :-
+
+                   Consumer: need to increase LCD brightness. Lookup and
+                   request next current mA value in brightness table (the
+                   consumer driver could be used on several different
+                   personalities based upon the same reference device).
+
+                   Power Domain: is the new current limit within the domain
+                   operating limits for this domain and system state (e.g.
+                   battery power, USB power)
+
+                   Regulator Domains: is the new current limit within the
+                   regulator operating parameters for input/ouput voltage.
+
+                   If the regulator request passes all the constraint tests
+                   then the new regulator value is applied.
+
+
+Design
+======
+
+The framework is designed and targeted at SoC based devices but may also be
+relevant to non SoC devices and is split into the following four interfaces:-
+
+
+   1. Consumer driver interface.
+
+      This uses a similar API to the kernel clock interface in that consumer
+      drivers can get and put a regulator (like they can with clocks atm) and
+      get/set voltage, current limit, mode, enable and disable. This should
+      allow consumers complete control over their supply voltage and current
+      limit. This also compiles out if not in use so drivers can be reused in
+      systems with no regulator based power control.
+
+        See Documentation/power/regulator/consumer.txt
+
+   2. Regulator driver interface.
+
+      This allows regulator drivers to register their regulators and provide
+      operations to the core. It also has a notifier call chain for propagating
+      regulator events to clients.
+
+        See Documentation/power/regulator/regulator.txt
+
+   3. Machine interface.
+
+      This interface is for machine specific code and allows the creation of
+      voltage/current domains (with constraints) for each regulator. It can
+      provide regulator constraints that will prevent device damage through
+      overvoltage or over current caused by buggy client drivers. It also
+      allows the creation of a regulator tree whereby some regulators are
+      supplied by others (similar to a clock tree).
+
+        See Documentation/power/regulator/machine.txt
+
+   4. Userspace ABI.
+
+      The framework also exports a lot of useful voltage/current/opmode data to
+      userspace via sysfs. This could be used to help monitor device power
+      consumption and status.
+
+        See Documentation/ABI/testing/regulator-sysfs.txt
diff --git a/Documentation/power/regulator/regulator.txt b/Documentation/power/regulator/regulator.txt
new file mode 100644
index 000000000000..a69050143592
--- /dev/null
+++ b/Documentation/power/regulator/regulator.txt
@@ -0,0 +1,30 @@
+Regulator Driver Interface
+==========================
+
+The regulator driver interface is relatively simple and designed to allow
+regulator drivers to register their services with the core framework.
+
+
+Registration
+============
+
+Drivers can register a regulator by calling :-
+
+struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc,
+                                          void *reg_data);
+
+This will register the regulators capabilities and operations the regulator
+core. The core does not touch reg_data (private to regulator driver).
+
+Regulators can be unregistered by calling :-
+
+void regulator_unregister(struct regulator_dev *rdev);
+
+
+Regulator Events
+================
+Regulators can send events (e.g. over temp, under voltage, etc) to consumer
+drivers by calling :-
+
+int regulator_notifier_call_chain(struct regulator_dev *rdev,
+                                  unsigned long event, void *data);
diff --git a/Documentation/powerpc/00-INDEX b/Documentation/powerpc/00-INDEX
index 3be84aa38dfe..29d839ce7327 100644
--- a/Documentation/powerpc/00-INDEX
+++ b/Documentation/powerpc/00-INDEX
@@ -20,8 +20,6 @@ mpc52xx-device-tree-bindings.txt
         - MPC5200 Device Tree Bindings
 ppc_htab.txt
         - info about the Linux/PPC /proc/ppc_htab entry
-SBC8260_memory_mapping.txt
-        - EST SBC8260 board info
 smp.txt
         - use and state info about Linux/PPC on MP machines
 sound.txt
diff --git a/Documentation/powerpc/SBC8260_memory_mapping.txt b/Documentation/powerpc/SBC8260_memory_mapping.txt
deleted file mode 100644
index e6e9ee0506c3..000000000000
--- a/Documentation/powerpc/SBC8260_memory_mapping.txt
+++ /dev/null
@@ -1,197 +0,0 @@
-Please mail me (Jon Diekema, diekema_jon@si.com or diekema@cideas.com)
-if you have questions, comments or corrections.
-
-        * EST SBC8260 Linux memory mapping rules
-
-        http://www.estc.com/ 
-        http://www.estc.com/products/boards/SBC8260-8240_ds.html
-
-        Initial conditions:
-        -------------------
-        
-        Tasks that need to be perform by the boot ROM before control is
-        transferred to zImage (compressed Linux kernel):
-
-        - Define the IMMR to 0xf0000000
-
-        - Initialize the memory controller so that RAM is available at
-          physical address 0x00000000.  On the SBC8260 is this 16M (64M)
-          SDRAM.
-
-        - The boot ROM should only clear the RAM that it is using.
-
-          The reason for doing this is to enhances the chances of a
-          successful post mortem on a Linux panic.  One of the first
-          items to examine is the 16k (LOG_BUF_LEN) circular console
-          buffer called log_buf which is defined in kernel/printk.c.
-
-        - To enhance boot ROM performance, the I-cache can be enabled.
-
-          Date: Mon, 22 May 2000 14:21:10 -0700
-          From: Neil Russell <caret@c-side.com>
-
-          LiMon (LInux MONitor) runs with and starts Linux with MMU
-          off, I-cache enabled, D-cache disabled.  The I-cache doesn't
-          need hints from the MMU to work correctly as the D-cache
-          does.  No D-cache means no special code to handle devices in
-          the presence of cache (no snooping, etc). The use of the
-          I-cache means that the monitor can run acceptably fast
-          directly from ROM, rather than having to copy it to RAM.
-
-        - Build the board information structure (see 
-          include/asm-ppc/est8260.h for its definition)
-
-        - The compressed Linux kernel (zImage) contains a bootstrap loader 
-          that is position independent; you can load it into any RAM, 
-          ROM or FLASH memory address >= 0x00500000 (above 5 MB), or
-          at its link address of 0x00400000 (4 MB).
-
-          Note: If zImage is loaded at its link address of 0x00400000 (4 MB),
-                then zImage will skip the step of moving itself to 
-                its link address.
-
-        - Load R3 with the address of the board information structure
-
-        - Transfer control to zImage
-
-        - The Linux console port is SMC1, and the baud rate is controlled
-          from the bi_baudrate field of the board information structure.
-          On thing to keep in mind when picking the baud rate, is that
-          there is no flow control on the SMC ports.  I would stick
-          with something safe and standard like 19200.
-
-          On the EST SBC8260, the SMC1 port is on the COM1 connector of
-          the board.
-
-        
-        EST SBC8260 defaults:
-        ---------------------
-
-                                Chip
-        Memory                  Sel  Bus   Use
-        ---------------------   ---  ---   ----------------------------------
-        0x00000000-0x03FFFFFF   CS2  60x   (16M or 64M)/64M SDRAM
-        0x04000000-0x04FFFFFF   CS4  local  4M/16M SDRAM (soldered to the board)
-        0x21000000-0x21000000   CS7  60x    1B/64K Flash present detect (from the flash SIMM)
-        0x21000001-0x21000001   CS7  60x    1B/64K Switches (read) and LEDs (write)
-        0x22000000-0x2200FFFF   CS5  60x    8K/64K EEPROM
-        0xFC000000-0xFCFFFFFF   CS6  60x    2M/16M flash (8 bits wide, soldered to the board)
-        0xFE000000-0xFFFFFFFF   CS0  60x    4M/16M flash (SIMM)
-
-        Notes:
-        ------
-
-        - The chip selects can map 32K blocks and up (powers of 2)
-
-        - The SDRAM machine can handled up to 128Mbytes per chip select
-
-        - Linux uses the 60x bus memory (the SDRAM DIMM) for the 
-          communications buffers.
-
-        - BATs can map 128K-256Mbytes each.  There are four data BATs and
-          four instruction BATs.  Generally the data and instruction BATs
-          are mapped the same.
-
-        - The IMMR must be set above the kernel virtual memory addresses,
-          which start at 0xC0000000.  Otherwise, the kernel may crash as
-          soon as you start any threads or processes due to VM collisions 
-          in the kernel or user process space.
-
-
-          Details from Dan Malek <dan_malek@mvista.com> on 10/29/1999:
-
-          The user application virtual space consumes the first 2 Gbytes
-          (0x00000000 to 0x7FFFFFFF).  The kernel virtual text starts at
-          0xC0000000, with data following.  There is a "protection hole"
-          between the end of kernel data and the start of the kernel
-          dynamically allocated space, but this space is still within
-          0xCxxxxxxx.
-
-          Obviously the kernel can't map any physical addresses 1:1 in
-          these ranges.
-
-
-          Details from Dan Malek <dan_malek@mvista.com> on 5/19/2000:
-
-          During the early kernel initialization, the kernel virtual
-          memory allocator is not operational.  Prior to this KVM
-          initialization, we choose to map virtual to physical addresses
-          1:1.  That is, the kernel virtual address exactly matches the
-          physical address on the bus.  These mappings are typically done
-          in arch/ppc/kernel/head.S, or arch/ppc/mm/init.c.  Only
-          absolutely necessary mappings should be done at this time, for
-          example board control registers or a serial uart.  Normal device
-          driver initialization should map resources later when necessary.
-
-          Although platform dependent, and certainly the case for embedded
-          8xx, traditionally memory is mapped at physical address zero,
-          and I/O devices above physical address 0x80000000.  The lowest
-          and highest (above 0xf0000000) I/O addresses are traditionally 
-          used for devices or registers we need to map during kernel 
-          initialization and prior to KVM operation.  For this reason, 
-          and since it followed prior PowerPC platform examples, I chose 
-          to map the embedded 8xx kernel to the 0xc0000000 virtual address.
-          This way, we can enable the MMU to map the kernel for proper 
-          operation, and still map a few windows before the KVM is operational.
-
-          On some systems, you could possibly run the kernel at the 
-          0x80000000 or any other virtual address.  It just depends upon 
-          mapping that must be done prior to KVM operational.  You can never 
-          map devices or kernel spaces that overlap with the user virtual 
-          space.  This is why default IMMR mapping used by most BDM tools 
-          won't work.  They put the IMMR at something like 0x10000000 or 
-          0x02000000 for example.  You simply can't map these addresses early
-          in the kernel, and continue proper system operation.
-
-          The embedded 8xx/82xx kernel is mature enough that all you should 
-          need to do is map the IMMR someplace at or above 0xf0000000 and it 
-          should boot far enough to get serial console messages and KGDB 
-          connected on any platform.  There are lots of other subtle memory 
-          management design features that you simply don't need to worry 
-          about.  If you are changing functions related to MMU initialization,
-          you are likely breaking things that are known to work and are 
-          heading down a path of disaster and frustration.  Your changes 
-          should be to make the flexibility of the processor fit Linux, 
-          not force arbitrary and non-workable memory mappings into Linux.
-
-        - You don't want to change KERNELLOAD or KERNELBASE, otherwise the
-          virtual memory and MMU code will get confused.
-        
-          arch/ppc/Makefile:KERNELLOAD = 0xc0000000
-
-          include/asm-ppc/page.h:#define PAGE_OFFSET    0xc0000000
-          include/asm-ppc/page.h:#define KERNELBASE     PAGE_OFFSET
-
-        - RAM is at physical address 0x00000000, and gets mapped to 
-          virtual address 0xC0000000 for the kernel.
-
-
-        Physical addresses used by the Linux kernel:
-        --------------------------------------------
-
-        0x00000000-0x3FFFFFFF   1GB reserved for RAM
-        0xF0000000-0xF001FFFF   128K IMMR  64K used for dual port memory,
-                                 64K for 8260 registers
-
-        
-        Logical addresses used by the Linux kernel:
-        -------------------------------------------
-
-        0xF0000000-0xFFFFFFFF   256M BAT0 (IMMR: dual port RAM, registers)
-        0xE0000000-0xEFFFFFFF   256M BAT1 (I/O space for custom boards)
-        0xC0000000-0xCFFFFFFF   256M BAT2 (RAM)
-        0xD0000000-0xDFFFFFFF   256M BAT3 (if RAM > 256MByte)
-
-
-        EST SBC8260 Linux mapping:
-        --------------------------
-
-        DBAT0, IBAT0, cache inhibited:
-
-                                Chip
-        Memory                  Sel  Use
-        ---------------------   ---  ---------------------------------
-        0xF0000000-0xF001FFFF   n/a  IMMR: dual port RAM, registers
-
-        DBAT1, IBAT1, cache inhibited:
-
diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/serial.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/serial.txt
index b35f3482e3e4..2ea76d9d137c 100644
--- a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/serial.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/serial.txt
@@ -7,6 +7,15 @@ Currently defined compatibles:
 - fsl,cpm2-scc-uart
 - fsl,qe-uart
 
+Modem control lines connected to GPIO controllers are listed in the gpios
+property as described in booting-without-of.txt, section IX.1 in the following
+order:
+
+CTS, RTS, DCD, DSR, DTR, and RI.
+
+The gpios property is optional and can be left out when control lines are
+not used.
+
 Example:
 
         serial@11a00 {
@@ -18,4 +27,6 @@ Example:
                 interrupt-parent = <&PIC>;
                 fsl,cpm-brg = <1>;
                 fsl,cpm-command = <00800000>;
+                gpios = <&gpio_c 15 0
+                         &gpio_d 29 0>;
         };
diff --git a/Documentation/rfkill.txt b/Documentation/rfkill.txt
index 0843ed0163a5..28b6ec87c642 100644
--- a/Documentation/rfkill.txt
+++ b/Documentation/rfkill.txt
@@ -390,9 +390,10 @@ rfkill lines are inactive, it must return RFKILL_STATE_SOFT_BLOCKED if its soft
 rfkill input line is active.  Only if none of the rfkill input lines are
 active, will it return RFKILL_STATE_UNBLOCKED.
 
-If it doesn't implement the get_state() hook, it must make sure that its calls
-to rfkill_force_state() are enough to keep the status always up-to-date, and it
-must do a rfkill_force_state() on resume from sleep.
+Since the device has a hardware rfkill line, it IS subject to state changes
+external to rfkill.  Therefore, the driver must make sure that it calls
+rfkill_force_state() to keep the status always up-to-date, and it must do a
+rfkill_force_state() on resume from sleep.
 
 Every time the driver gets a notification from the card that one of its rfkill
 lines changed state (polling might be needed on badly designed cards that don't
@@ -422,13 +423,24 @@ of the hardware is unknown), or read-write (where the hardware can be queried
 about its current state).
 
 The rfkill class will call the get_state hook of a device every time it needs
-to know the *real* current state of the hardware.  This can happen often.
+to know the *real* current state of the hardware.  This can happen often, but
+it does not do any polling, so it is not enough on hardware that is subject
+to state changes outside of the rfkill subsystem.
+
+Therefore, calling rfkill_force_state() when a state change happens is
+mandatory when the device has a hardware rfkill line, or when something else
+like the firmware could cause its state to be changed without going through the
+rfkill class.
 
 Some hardware provides events when its status changes.  In these cases, it is
 best for the driver to not provide a get_state hook, and instead register the
 rfkill class *already* with the correct status, and keep it updated using
 rfkill_force_state() when it gets an event from the hardware.
 
+rfkill_force_state() must be used on the device resume handlers to update the
+rfkill status, should there be any chance of the device status changing during
+the sleep.
+
 There is no provision for a statically-allocated rfkill struct.  You must
 use rfkill_allocate() to allocate one.
 
diff --git a/Documentation/video4linux/CARDLIST.au0828 b/Documentation/video4linux/CARDLIST.au0828
index 86d1c8e7b18f..eedc399e8deb 100644
--- a/Documentation/video4linux/CARDLIST.au0828
+++ b/Documentation/video4linux/CARDLIST.au0828
@@ -2,3 +2,4 @@
   1 -> Hauppauge HVR950Q                        (au0828)        [2040:7200,2040:7210,2040:7217,2040:721b,2040:721f,2040:7280,0fd9:0008]
   2 -> Hauppauge HVR850                         (au0828)        [2040:7240]
   3 -> DViCO FusionHDTV USB                     (au0828)        [0fe9:d620]
+  4 -> Hauppauge HVR950Q rev xxF8               (au0828)        [2040:7201,2040:7211,2040:7281]
diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx
index 10591467ef16..89c7f32abf9f 100644
--- a/Documentation/video4linux/CARDLIST.em28xx
+++ b/Documentation/video4linux/CARDLIST.em28xx
@@ -1,11 +1,11 @@
   0 -> Unknown EM2800 video grabber             (em2800)        [eb1a:2800]
-  1 -> Unknown EM2750/28xx video grabber        (em2820/em2840) [eb1a:2750,eb1a:2820,eb1a:2821,eb1a:2860,eb1a:2861,eb1a:2870,eb1a:2881,eb1a:2883]
+  1 -> Unknown EM2750/28xx video grabber        (em2820/em2840) [eb1a:2820,eb1a:2821,eb1a:2860,eb1a:2861,eb1a:2870,eb1a:2881,eb1a:2883]
   2 -> Terratec Cinergy 250 USB                 (em2820/em2840) [0ccd:0036]
   3 -> Pinnacle PCTV USB 2                      (em2820/em2840) [2304:0208]
   4 -> Hauppauge WinTV USB 2                    (em2820/em2840) [2040:4200,2040:4201]
   5 -> MSI VOX USB 2.0                          (em2820/em2840)
   6 -> Terratec Cinergy 200 USB                 (em2800)
-  7 -> Leadtek Winfast USB II                   (em2800)
+  7 -> Leadtek Winfast USB II                   (em2800)        [0413:6023]
   8 -> Kworld USB2800                           (em2800)
   9 -> Pinnacle Dazzle DVC 90/DVC 100           (em2820/em2840) [2304:0207,2304:021a]
  10 -> Hauppauge WinTV HVR 900                  (em2880)        [2040:6500]
@@ -14,7 +14,46 @@
  13 -> Terratec Prodigy XS                      (em2880)        [0ccd:0047]
  14 -> Pixelview Prolink PlayTV USB 2.0         (em2820/em2840)
  15 -> V-Gear PocketTV                          (em2800)
- 16 -> Hauppauge WinTV HVR 950                  (em2880)        [2040:6513,2040:6517,2040:651b,2040:651f]
+ 16 -> Hauppauge WinTV HVR 950                  (em2883)        [2040:6513,2040:6517,2040:651b,2040:651f]
  17 -> Pinnacle PCTV HD Pro Stick               (em2880)        [2304:0227]
  18 -> Hauppauge WinTV HVR 900 (R2)             (em2880)        [2040:6502]
  19 -> PointNix Intra-Oral Camera               (em2860)
+ 20 -> AMD ATI TV Wonder HD 600                 (em2880)        [0438:b002]
+ 21 -> eMPIA Technology, Inc. GrabBeeX+ Video Encoder (em2800)        [eb1a:2801]
+ 22 -> Unknown EM2750/EM2751 webcam grabber     (em2750)        [eb1a:2750,eb1a:2751]
+ 23 -> Huaqi DLCW-130                           (em2750)
+ 24 -> D-Link DUB-T210 TV Tuner                 (em2820/em2840) [2001:f112]
+ 25 -> Gadmei UTV310                            (em2820/em2840)
+ 26 -> Hercules Smart TV USB 2.0                (em2820/em2840)
+ 27 -> Pinnacle PCTV USB 2 (Philips FM1216ME)   (em2820/em2840)
+ 28 -> Leadtek Winfast USB II Deluxe            (em2820/em2840)
+ 29 -> Pinnacle Dazzle DVC 100                  (em2820/em2840)
+ 30 -> Videology 20K14XUSB USB2.0               (em2820/em2840)
+ 31 -> Usbgear VD204v9                          (em2821)
+ 32 -> Supercomp USB 2.0 TV                     (em2821)
+ 33 -> SIIG AVTuner-PVR/Prolink PlayTV USB 2.0  (em2821)
+ 34 -> Terratec Cinergy A Hybrid XS             (em2860)        [0ccd:004f]
+ 35 -> Typhoon DVD Maker                        (em2860)
+ 36 -> NetGMBH Cam                              (em2860)
+ 37 -> Gadmei UTV330                            (em2860)
+ 38 -> Yakumo MovieMixer                        (em2861)
+ 39 -> KWorld PVRTV 300U                        (em2861)        [eb1a:e300]
+ 40 -> Plextor ConvertX PX-TV100U               (em2861)        [093b:a005]
+ 41 -> Kworld 350 U DVB-T                       (em2870)        [eb1a:e350]
+ 42 -> Kworld 355 U DVB-T                       (em2870)        [eb1a:e355,eb1a:e357]
+ 43 -> Terratec Cinergy T XS                    (em2870)        [0ccd:0043]
+ 44 -> Terratec Cinergy T XS (MT2060)           (em2870)
+ 45 -> Pinnacle PCTV DVB-T                      (em2870)
+ 46 -> Compro, VideoMate U3                     (em2870)        [185b:2870]
+ 47 -> KWorld DVB-T 305U                        (em2880)        [eb1a:e305]
+ 48 -> KWorld DVB-T 310U                        (em2880)
+ 49 -> MSI DigiVox A/D                          (em2880)        [eb1a:e310]
+ 50 -> MSI DigiVox A/D II                       (em2880)        [eb1a:e320]
+ 51 -> Terratec Hybrid XS Secam                 (em2880)        [0ccd:004c]
+ 52 -> DNT DA2 Hybrid                           (em2881)
+ 53 -> Pinnacle Hybrid Pro                      (em2881)
+ 54 -> Kworld VS-DVB-T 323UR                    (em2882)        [eb1a:e323]
+ 55 -> Terratec Hybrid XS (em2882)              (em2882)        [0ccd:005e]
+ 56 -> Pinnacle Hybrid Pro (2)                  (em2882)        [2304:0226]
+ 57 -> Kworld PlusTV HD Hybrid 330              (em2883)        [eb1a:a316]
+ 58 -> Compro VideoMate ForYou/Stereo           (em2820/em2840) [185b:2041]
diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt
index 0c4880af57a3..bcaf4ab383be 100644
--- a/Documentation/video4linux/gspca.txt
+++ b/Documentation/video4linux/gspca.txt
@@ -1,4 +1,4 @@
-List of the webcams know by gspca.
+List of the webcams known by gspca.
 
 The modules are:
         gspca_main      main driver
diff --git a/MAINTAINERS b/MAINTAINERS
index 03c5d6ccb9f8..5e6d6ab82433 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1878,13 +1878,9 @@ W:	http://gigaset307x.sourceforge.net/
 S:      Maintained
 
 HARDWARE MONITORING
-P:      Mark M. Hoffman
-M:      mhoffman@lightlink.com
 L:      lm-sensors@lm-sensors.org
 W:      http://www.lm-sensors.org/
-T:      git lm-sensors.org:/kernel/mhoffman/hwmon-2.6.git testing
-T:      git lm-sensors.org:/kernel/mhoffman/hwmon-2.6.git release
-S:      Maintained
+S:      Orphaned
 
 HARDWARE RANDOM NUMBER GENERATOR CORE
 S:      Orphaned
@@ -3796,6 +3792,12 @@ P:	Ben Nizette
 M:      bn@niasdigital.com
 S:      Maintained
 
+SOC-CAMERA V4L2 SUBSYSTEM
+P:     Guennadi Liakhovetski
+M:     g.liakhovetski@gmx.de
+L:     video4linux-list@redhat.com
+S:     Maintained
+
 SOFTWARE RAID (Multiple Disks) SUPPORT
 P:      Ingo Molnar
 M:      mingo@redhat.com
@@ -3962,7 +3964,7 @@ M:	lethal@linux-sh.org
 L:      linux-sh@vger.kernel.org
 W:      http://www.linux-sh.org
 T:      git kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6.git
-S:      Maintained
+S:      Supported
 
 SUN3/3X
 P:      Sam Creasey
@@ -4498,6 +4500,15 @@ M:	kaber@trash.net
 L:      netdev@vger.kernel.org
 S:      Maintained
 
+VOLTAGE AND CURRENT REGULATOR FRAMEWORK
+P:      Liam Girdwood
+M:      lg@opensource.wolfsonmicro.com
+P:      Mark Brown
+M:      broonie@opensource.wolfsonmicro.com
+W:      http://opensource.wolfsonmicro.com/node/15
+T:      git kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6.git
+S:      Supported
+
 VT1211 HARDWARE MONITOR DRIVER
 P:      Juerg Haefliger
 M:      juergh@gmail.com
diff --git a/Makefile b/Makefile
index 40f24810116c..f156f40d6334 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
-SUBLEVEL = 26
-EXTRAVERSION =
+SUBLEVEL = 27
+EXTRAVERSION = -rc1
 NAME = Rotary Wombat
 
 # *DOCUMENTATION*
@@ -206,7 +206,11 @@ ifeq ($(ARCH),x86_64)
 endif
 
 # Where to locate arch specific headers
-hdr-arch       := $(SRCARCH)
+ifeq ($(ARCH),sparc64)
+       hdr-arch  := sparc
+else
+       hdr-arch  := $(SRCARCH)
+endif
 
 KCONFIG_CONFIG  ?= .config
 
@@ -926,7 +930,7 @@ ifneq ($(KBUILD_SRC),)
                 /bin/false; \
         fi;
         $(Q)if [ ! -d include2 ]; then mkdir -p include2; fi;
-        $(Q)if [ -e $(srctree)/include/asm-$(SRCARCH)/system.h ]; then  \
+        $(Q)if [ -e $(srctree)/include/asm-$(SRCARCH)/errno.h ]; then  \
             ln -fsn $(srctree)/include/asm-$(SRCARCH) include2/asm;     \
             fi
 endif
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index c8f528284a94..4b8acd2851f4 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -17,6 +17,7 @@ config ARM
         select HAVE_KRETPROBES if (HAVE_KPROBES)
         select HAVE_FTRACE if (!XIP_KERNEL)
         select HAVE_DYNAMIC_FTRACE if (HAVE_FTRACE)
+        select HAVE_GENERIC_DMA_COHERENT
         help
           The ARM series is a line of low-power-consumption RISC chip designs
           licensed by ARM Ltd and targeted at embedded applications and
@@ -234,6 +235,7 @@ config ARCH_VERSATILE
 config ARCH_AT91
         bool "Atmel AT91"
         select GENERIC_GPIO
+        select HAVE_CLK
         help
           This enables support for systems based on the Atmel AT91RM9200,
           AT91SAM9 and AT91CAP9 processors.
@@ -267,7 +269,6 @@ config ARCH_EP93XX
         select ARM_VIC
         select GENERIC_GPIO
         select HAVE_CLK
-        select HAVE_CLK
         select ARCH_REQUIRE_GPIOLIB
         help
           This enables support for the Cirrus EP93xx series of CPUs.
@@ -1224,6 +1225,8 @@ source "drivers/dma/Kconfig"
 
 source "drivers/dca/Kconfig"
 
+source "drivers/regulator/Kconfig"
+
 source "drivers/uio/Kconfig"
 
 endmenu
diff --git a/arch/arm/configs/at91cap9adk_defconfig b/arch/arm/configs/at91cap9adk_defconfig
index be2b2f38fd94..bf97801a1068 100644
--- a/arch/arm/configs/at91cap9adk_defconfig
+++ b/arch/arm/configs/at91cap9adk_defconfig
@@ -170,7 +170,7 @@ CONFIG_MACH_AT91CAP9ADK=y
 # AT91 Board Options
 #
 CONFIG_MTD_AT91_DATAFLASH_CARD=y
-# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set
+# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
 
 #
 # AT91 Feature Selections
@@ -442,7 +442,7 @@ CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
-CONFIG_MTD_NAND_AT91=y
+CONFIG_MTD_NAND_ATMEL=y
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_ALAUDA is not set
diff --git a/arch/arm/configs/at91sam9260ek_defconfig b/arch/arm/configs/at91sam9260ek_defconfig
index 2011adfa6758..38e6a0abeb4e 100644
--- a/arch/arm/configs/at91sam9260ek_defconfig
+++ b/arch/arm/configs/at91sam9260ek_defconfig
@@ -176,7 +176,7 @@ CONFIG_MACH_AT91SAM9260EK=y
 # AT91 Board Options
 #
 # CONFIG_MTD_AT91_DATAFLASH_CARD is not set
-# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set
+# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
 
 #
 # AT91 Feature Selections
diff --git a/arch/arm/configs/at91sam9261ek_defconfig b/arch/arm/configs/at91sam9261ek_defconfig
index 4049768962d2..93b779f94b41 100644
--- a/arch/arm/configs/at91sam9261ek_defconfig
+++ b/arch/arm/configs/at91sam9261ek_defconfig
@@ -169,7 +169,7 @@ CONFIG_MACH_AT91SAM9261EK=y
 # AT91 Board Options
 #
 # CONFIG_MTD_AT91_DATAFLASH_CARD is not set
-# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set
+# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
 
 #
 # AT91 Feature Selections
@@ -433,7 +433,7 @@ CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
-CONFIG_MTD_NAND_AT91=y
+CONFIG_MTD_NAND_ATMEL=y
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_ALAUDA is not set
diff --git a/arch/arm/configs/at91sam9263ek_defconfig b/arch/arm/configs/at91sam9263ek_defconfig
index fa1c5aecb5a8..a7ddd94363ca 100644
--- a/arch/arm/configs/at91sam9263ek_defconfig
+++ b/arch/arm/configs/at91sam9263ek_defconfig
@@ -169,7 +169,7 @@ CONFIG_MACH_AT91SAM9263EK=y
 # AT91 Board Options
 #
 CONFIG_MTD_AT91_DATAFLASH_CARD=y
-# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set
+# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
 
 #
 # AT91 Feature Selections
@@ -428,7 +428,7 @@ CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
-CONFIG_MTD_NAND_AT91=y
+CONFIG_MTD_NAND_ATMEL=y
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_ALAUDA is not set
diff --git a/arch/arm/configs/at91sam9g20ek_defconfig b/arch/arm/configs/at91sam9g20ek_defconfig
index c06863847364..df0d6ee672b3 100644
--- a/arch/arm/configs/at91sam9g20ek_defconfig
+++ b/arch/arm/configs/at91sam9g20ek_defconfig
@@ -168,7 +168,7 @@ CONFIG_MACH_AT91SAM9G20EK=y
 # AT91 Board Options
 #
 # CONFIG_MTD_AT91_DATAFLASH_CARD is not set
-# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set
+# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
 
 #
 # AT91 Feature Selections
@@ -442,10 +442,10 @@ CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
-CONFIG_MTD_NAND_AT91=y
-CONFIG_MTD_NAND_AT91_ECC_SOFT=y
-# CONFIG_MTD_NAND_AT91_ECC_HW is not set
-# CONFIG_MTD_NAND_AT91_ECC_NONE is not set
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_ALAUDA is not set
diff --git a/arch/arm/configs/at91sam9rlek_defconfig b/arch/arm/configs/at91sam9rlek_defconfig
index d8ec5f9ca6ec..1c76642272a1 100644
--- a/arch/arm/configs/at91sam9rlek_defconfig
+++ b/arch/arm/configs/at91sam9rlek_defconfig
@@ -392,7 +392,7 @@ CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
-CONFIG_MTD_NAND_AT91=y
+CONFIG_MTD_NAND_ATMEL=y
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_ONENAND is not set
diff --git a/arch/arm/configs/cam60_defconfig b/arch/arm/configs/cam60_defconfig
index f3cd4a95373a..f945105d6cd6 100644
--- a/arch/arm/configs/cam60_defconfig
+++ b/arch/arm/configs/cam60_defconfig
@@ -466,10 +466,10 @@ CONFIG_MTD_NAND_VERIFY_WRITE=y
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
-CONFIG_MTD_NAND_AT91=y
-# CONFIG_MTD_NAND_AT91_ECC_SOFT is not set
-CONFIG_MTD_NAND_AT91_ECC_HW=y
-# CONFIG_MTD_NAND_AT91_ECC_NONE is not set
+CONFIG_MTD_NAND_ATMEL=y
+# CONFIG_MTD_NAND_ATMEL_ECC_SOFT is not set
+CONFIG_MTD_NAND_ATMEL_ECC_HW=y
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_ALAUDA is not set
diff --git a/arch/arm/configs/qil-a9260_defconfig b/arch/arm/configs/qil-a9260_defconfig
index ef903bed061e..5cbd81589647 100644
--- a/arch/arm/configs/qil-a9260_defconfig
+++ b/arch/arm/configs/qil-a9260_defconfig
@@ -458,10 +458,10 @@ CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
-CONFIG_MTD_NAND_AT91=y
-CONFIG_MTD_NAND_AT91_ECC_SOFT=y
-# CONFIG_MTD_NAND_AT91_ECC_HW is not set
-# CONFIG_MTD_NAND_AT91_ECC_NONE is not set
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_ALAUDA is not set
diff --git a/arch/arm/configs/sam9_l9260_defconfig b/arch/arm/configs/sam9_l9260_defconfig
index 8688362bcf7b..1174e2764875 100644
--- a/arch/arm/configs/sam9_l9260_defconfig
+++ b/arch/arm/configs/sam9_l9260_defconfig
@@ -429,7 +429,7 @@ CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
-CONFIG_MTD_NAND_AT91=y
+CONFIG_MTD_NAND_ATMEL=y
 # CONFIG_MTD_NAND_NANDSIM is not set
 CONFIG_MTD_NAND_PLATFORM=y
 # CONFIG_MTD_ONENAND is not set
diff --git a/arch/arm/configs/usb-a9260_defconfig b/arch/arm/configs/usb-a9260_defconfig
index 3680bd2df26d..fcb4aaabd439 100644
--- a/arch/arm/configs/usb-a9260_defconfig
+++ b/arch/arm/configs/usb-a9260_defconfig
@@ -458,10 +458,10 @@ CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
-CONFIG_MTD_NAND_AT91=y
-CONFIG_MTD_NAND_AT91_ECC_SOFT=y
-# CONFIG_MTD_NAND_AT91_ECC_HW is not set
-# CONFIG_MTD_NAND_AT91_ECC_NONE is not set
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_ALAUDA is not set
diff --git a/arch/arm/configs/usb-a9263_defconfig b/arch/arm/configs/usb-a9263_defconfig
index 48d455bc7363..b786e0407e8e 100644
--- a/arch/arm/configs/usb-a9263_defconfig
+++ b/arch/arm/configs/usb-a9263_defconfig
@@ -450,10 +450,10 @@ CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
-CONFIG_MTD_NAND_AT91=y
-CONFIG_MTD_NAND_AT91_ECC_SOFT=y
-# CONFIG_MTD_NAND_AT91_ECC_HW is not set
-# CONFIG_MTD_NAND_AT91_ECC_NONE is not set
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_ALAUDA is not set
diff --git a/arch/arm/configs/yl9200_defconfig b/arch/arm/configs/yl9200_defconfig
index 26de37f74686..a9f41c24c9dc 100644
--- a/arch/arm/configs/yl9200_defconfig
+++ b/arch/arm/configs/yl9200_defconfig
@@ -421,7 +421,7 @@ CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_ECC_SMC is not set
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=y
-CONFIG_MTD_NAND_AT91=y
+CONFIG_MTD_NAND_ATMEL=y
 # CONFIG_MTD_NAND_NANDSIM is not set
 CONFIG_MTD_NAND_PLATFORM=y
 # CONFIG_MTD_ALAUDA is not set
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 5bad6b9b00d7..a048b92cb407 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -297,7 +297,7 @@ config MTD_AT91_DATAFLASH_CARD
         help
           Enable support for the DataFlash card.
 
-config MTD_NAND_AT91_BUSWIDTH_16
+config MTD_NAND_ATMEL_BUSWIDTH_16
         bool "Enable 16-bit data bus interface to NAND flash"
         depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91CAP9ADK)
         help
diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c
index dc8b40783d94..25765f1afca9 100644
--- a/arch/arm/mach-at91/at91cap9_devices.c
+++ b/arch/arm/mach-at91/at91cap9_devices.c
@@ -376,7 +376,7 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
  *  NAND / SmartMedia
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
+#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
 static struct atmel_nand_data nand_data;
 
 #define NAND_BASE       AT91_CHIPSELECT_3
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index 8ced9bc82099..d2c5c84bf6b8 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -368,7 +368,7 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
  *  NAND / SmartMedia
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
+#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
 static struct atmel_nand_data nand_data;
 
 #define NAND_BASE       AT91_CHIPSELECT_3
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index cae5f52f1278..f5fec0a9cf49 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -283,7 +283,7 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
  *  NAND / SmartMedia
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
+#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
 static struct atmel_nand_data nand_data;
 
 #define NAND_BASE       AT91_CHIPSELECT_3
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index 483d436af22d..b80860e31383 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -198,7 +198,7 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
  *  NAND / SmartMedia
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
+#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
 static struct atmel_nand_data nand_data;
 
 #define NAND_BASE       AT91_CHIPSELECT_3
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index 9762b15f658a..42108d02f593 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -352,7 +352,7 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
  *  NAND / SmartMedia
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
+#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
 static struct atmel_nand_data nand_data;
 
 #define NAND_BASE       AT91_CHIPSELECT_3
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index 5f3094870cad..9c61576f1c8d 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -194,7 +194,7 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
  *  NAND / SmartMedia
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
+#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
 static struct atmel_nand_data nand_data;
 
 #define NAND_BASE       AT91_CHIPSELECT_3
diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c
index 117cf6c9afce..1f4725972edc 100644
--- a/arch/arm/mach-at91/board-cap9adk.c
+++ b/arch/arm/mach-at91/board-cap9adk.c
@@ -188,7 +188,7 @@ static struct atmel_nand_data __initdata cap9adk_nand_data = {
 //      .rdy_pin        = ... not connected
         .enable_pin     = AT91_PIN_PD15,
         .partition_info = nand_partitions,
-#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
         .bus_width_16   = 1,
 #else
         .bus_width_16   = 0,
diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c
index 99b4ec3818d6..33b1ccdb516d 100644
--- a/arch/arm/mach-at91/board-qil-a9260.c
+++ b/arch/arm/mach-at91/board-qil-a9260.c
@@ -140,14 +140,14 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
         return ek_nand_partition;
 }
 
-static struct at91_nand_data __initdata ek_nand_data = {
+static struct atmel_nand_data __initdata ek_nand_data = {
         .ale            = 21,
         .cle            = 22,
 //      .det_pin        = ... not connected
         .rdy_pin        = AT91_PIN_PC13,
         .enable_pin     = AT91_PIN_PC14,
         .partition_info = nand_partitions,
-#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
         .bus_width_16   = 1,
 #else
         .bus_width_16   = 0,
diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c
index 57a6221943ed..3cd5f8d0e2e2 100644
--- a/arch/arm/mach-at91/board-sam9-l9260.c
+++ b/arch/arm/mach-at91/board-sam9-l9260.c
@@ -148,7 +148,7 @@ static struct atmel_nand_data __initdata ek_nand_data = {
         .rdy_pin        = AT91_PIN_PC13,
         .enable_pin     = AT91_PIN_PC14,
         .partition_info = nand_partitions,
-#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
         .bus_width_16   = 1,
 #else
         .bus_width_16   = 0,
diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
index 6a680795c3c8..daf93a588068 100644
--- a/arch/arm/mach-at91/board-sam9260ek.c
+++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -185,7 +185,7 @@ static struct atmel_nand_data __initdata ek_nand_data = {
         .rdy_pin        = AT91_PIN_PC13,
         .enable_pin     = AT91_PIN_PC14,
         .partition_info = nand_partitions,
-#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
         .bus_width_16   = 1,
 #else
         .bus_width_16   = 0,
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index 43dfbd0d543a..12bf527f93be 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -190,7 +190,7 @@ static struct atmel_nand_data __initdata ek_nand_data = {
         .rdy_pin        = AT91_PIN_PC15,
         .enable_pin     = AT91_PIN_PC14,
         .partition_info = nand_partitions,
-#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
         .bus_width_16   = 1,
 #else
         .bus_width_16   = 0,
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index 6605a0980117..63121197f8c9 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -194,7 +194,7 @@ static struct atmel_nand_data __initdata ek_nand_data = {
         .rdy_pin        = AT91_PIN_PA22,
         .enable_pin     = AT91_PIN_PD15,
         .partition_info = nand_partitions,
-#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
         .bus_width_16   = 1,
 #else
         .bus_width_16   = 0,
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index 45617c201240..e0c07952cc34 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -143,13 +143,13 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
 }
 
 /* det_pin is not connected */
-static struct at91_nand_data __initdata ek_nand_data = {
+static struct atmel_nand_data __initdata ek_nand_data = {
         .ale            = 21,
         .cle            = 22,
         .rdy_pin        = AT91_PIN_PC13,
         .enable_pin     = AT91_PIN_PC14,
         .partition_info = nand_partitions,
-#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
         .bus_width_16   = 1,
 #else
         .bus_width_16   = 0,
diff --git a/arch/arm/mach-at91/board-usb-a9260.c b/arch/arm/mach-at91/board-usb-a9260.c
index 837aedf8ffeb..2f4ecac150d9 100644
--- a/arch/arm/mach-at91/board-usb-a9260.c
+++ b/arch/arm/mach-at91/board-usb-a9260.c
@@ -114,14 +114,14 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
         return ek_nand_partition;
 }
 
-static struct at91_nand_data __initdata ek_nand_data = {
+static struct atmel_nand_data __initdata ek_nand_data = {
         .ale            = 21,
         .cle            = 22,
 //      .det_pin        = ... not connected
         .rdy_pin        = AT91_PIN_PC13,
         .enable_pin     = AT91_PIN_PC14,
         .partition_info = nand_partitions,
-#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
         .bus_width_16   = 1,
 #else
         .bus_width_16   = 0,
diff --git a/arch/arm/mach-at91/board-usb-a9263.c b/arch/arm/mach-at91/board-usb-a9263.c
index 95800d32bd49..0e9649d3eda1 100644
--- a/arch/arm/mach-at91/board-usb-a9263.c
+++ b/arch/arm/mach-at91/board-usb-a9263.c
@@ -127,14 +127,14 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
         return ek_nand_partition;
 }
 
-static struct at91_nand_data __initdata ek_nand_data = {
+static struct atmel_nand_data __initdata ek_nand_data = {
         .ale            = 21,
         .cle            = 22,
 //      .det_pin        = ... not connected
         .rdy_pin        = AT91_PIN_PA22,
         .enable_pin     = AT91_PIN_PD15,
         .partition_info = nand_partitions,
-#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
         .bus_width_16   = 1,
 #else
         .bus_width_16   = 0,
diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c
index e1f8de2c74a2..b6437f47a77f 100644
--- a/arch/arm/mach-kirkwood/rd88f6281-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c
@@ -18,6 +18,7 @@
 #include <linux/timer.h>
 #include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
@@ -69,6 +70,8 @@ static struct platform_device rd88f6281_nand_flash = {
 
 static struct mv643xx_eth_platform_data rd88f6281_ge00_data = {
         .phy_addr       = -1,
+        .speed          = SPEED_1000,
+        .duplex         = DUPLEX_FULL,
 };
 
 static struct mv_sata_platform_data rd88f6281_sata_data = {
diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
index d50e3650a09e..73e9242da7ad 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
@@ -15,6 +15,7 @@
 #include <linux/irq.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
 #include <asm/mach-types.h>
 #include <asm/gpio.h>
 #include <asm/leds.h>
@@ -88,6 +89,8 @@ static struct orion5x_mpp_mode rd88f5181l_fxo_mpp_modes[] __initdata = {
 
 static struct mv643xx_eth_platform_data rd88f5181l_fxo_eth_data = {
         .phy_addr       = -1,
+        .speed          = SPEED_1000,
+        .duplex         = DUPLEX_FULL,
 };
 
 static void __init rd88f5181l_fxo_init(void)
diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
index b56447d32e17..ac482019abbf 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
@@ -15,6 +15,7 @@
 #include <linux/irq.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
 #include <linux/i2c.h>
 #include <asm/mach-types.h>
 #include <asm/gpio.h>
@@ -89,6 +90,8 @@ static struct orion5x_mpp_mode rd88f5181l_ge_mpp_modes[] __initdata = {
 
 static struct mv643xx_eth_platform_data rd88f5181l_ge_eth_data = {
         .phy_addr       = -1,
+        .speed          = SPEED_1000,
+        .duplex         = DUPLEX_FULL,
 };
 
 static struct i2c_board_info __initdata rd88f5181l_ge_i2c_rtc = {
diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c
index 1af093ff8cf3..25568c2a3d29 100644
--- a/arch/arm/mach-orion5x/wnr854t-setup.c
+++ b/arch/arm/mach-orion5x/wnr854t-setup.c
@@ -14,6 +14,7 @@
 #include <linux/delay.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
 #include <asm/mach-types.h>
 #include <asm/gpio.h>
 #include <asm/mach/arch.h>
@@ -92,6 +93,8 @@ static struct platform_device wnr854t_nor_flash = {
 
 static struct mv643xx_eth_platform_data wnr854t_eth_data = {
         .phy_addr       = -1,
+        .speed          = SPEED_1000,
+        .duplex         = DUPLEX_FULL,
 };
 
 static void __init wnr854t_init(void)
diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
index aeab55c6a82d..9b8ee8c48bf0 100644
--- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c
+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
@@ -14,6 +14,7 @@
 #include <linux/delay.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
 #include <asm/mach-types.h>
 #include <asm/gpio.h>
 #include <asm/mach/arch.h>
@@ -100,6 +101,8 @@ static struct platform_device wrt350n_v2_nor_flash = {
 
 static struct mv643xx_eth_platform_data wrt350n_v2_eth_data = {
         .phy_addr       = -1,
+        .speed          = SPEED_1000,
+        .duplex         = DUPLEX_FULL,
 };
 
 static void __init wrt350n_v2_init(void)
diff --git a/arch/arm/mm/consistent.c b/arch/arm/mm/consistent.c
index 333a82a3717e..db7b3e38ef1d 100644
--- a/arch/arm/mm/consistent.c
+++ b/arch/arm/mm/consistent.c
@@ -274,6 +274,11 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
 void *
 dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp)
 {
+        void *memory;
+
+        if (dma_alloc_from_coherent(dev, size, handle, &memory))
+                return memory;
+
         if (arch_is_coherent()) {
                 void *virt;
 
@@ -362,6 +367,9 @@ void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr
 
         WARN_ON(irqs_disabled());
 
+        if (dma_release_from_coherent(dev, get_order(size), cpu_addr))
+                return;
+
         if (arch_is_coherent()) {
                 kfree(cpu_addr);
                 return;
diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig
index 2a92cb1886ca..7a64fcef9d07 100644
--- a/arch/cris/arch-v32/drivers/Kconfig
+++ b/arch/cris/arch-v32/drivers/Kconfig
@@ -641,6 +641,7 @@ config PCI
        bool
        depends on ETRAX_CARDBUS
        default y
+       select HAVE_GENERIC_DMA_COHERENT
 
 config ETRAX_IOP_FW_LOAD
         tristate "IO-processor hotplug firmware loading support"
diff --git a/arch/cris/arch-v32/drivers/pci/dma.c b/arch/cris/arch-v32/drivers/pci/dma.c
index e0364654fc44..fbe65954ee6c 100644
--- a/arch/cris/arch-v32/drivers/pci/dma.c
+++ b/arch/cris/arch-v32/drivers/pci/dma.c
@@ -15,35 +15,16 @@
 #include <linux/pci.h>
 #include <asm/io.h>
 
-struct dma_coherent_mem {
-        void            *virt_base;
-        u32             device_base;
-        int             size;
-        int             flags;
-        unsigned long   *bitmap;
-};
-
 void *dma_alloc_coherent(struct device *dev, size_t size,
                            dma_addr_t *dma_handle, gfp_t gfp)
 {
         void *ret;
-        struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL;
         int order = get_order(size);
         /* ignore region specifiers */
         gfp &= ~(__GFP_DMA | __GFP_HIGHMEM);
 
-        if (mem) {
-                int page = bitmap_find_free_region(mem->bitmap, mem->size,
-                                                     order);
-                if (page >= 0) {
-                        *dma_handle = mem->device_base + (page << PAGE_SHIFT);
-                        ret = mem->virt_base + (page << PAGE_SHIFT);
-                        memset(ret, 0, size);
-                        return ret;
-                }
-                if (mem->flags & DMA_MEMORY_EXCLUSIVE)
-                        return NULL;
-        }
+        if (dma_alloc_from_coherent(dev, size, dma_handle, &ret))
+                return ret;
 
         if (dev == NULL || (dev->coherent_dma_mask < 0xffffffff))
                 gfp |= GFP_DMA;
@@ -60,90 +41,9 @@ void *dma_alloc_coherent(struct device *dev, size_t size,
 void dma_free_coherent(struct device *dev, size_t size,
                          void *vaddr, dma_addr_t dma_handle)
 {
-        struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL;
         int order = get_order(size);
 
-        if (mem && vaddr >= mem->virt_base && vaddr < (mem->virt_base + (mem->size << PAGE_SHIFT))) {
-                int page = (vaddr - mem->virt_base) >> PAGE_SHIFT;
-
-                bitmap_release_region(mem->bitmap, page, order);
-        } else
+        if (!dma_release_from_coherent(dev, order, vaddr))
                 free_pages((unsigned long)vaddr, order);
 }
 
-int dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr,
-                                dma_addr_t device_addr, size_t size, int flags)
-{
-        void __iomem *mem_base;
-        int pages = size >> PAGE_SHIFT;
-        int bitmap_size = BITS_TO_LONGS(pages) * sizeof(long);
-
-        if ((flags & (DMA_MEMORY_MAP | DMA_MEMORY_IO)) == 0)
-                goto out;
-        if (!size)
-                goto out;
-        if (dev->dma_mem)
-                goto out;
-
-        /* FIXME: this routine just ignores DMA_MEMORY_INCLUDES_CHILDREN */
-
-        mem_base = ioremap(bus_addr, size);
-        if (!mem_base)
-                goto out;
-
-        dev->dma_mem = kzalloc(sizeof(struct dma_coherent_mem), GFP_KERNEL);
-        if (!dev->dma_mem)
-                goto iounmap_out;
-        dev->dma_mem->bitmap = kzalloc(bitmap_size, GFP_KERNEL);
-        if (!dev->dma_mem->bitmap)
-                goto free1_out;
-
-        dev->dma_mem->virt_base = mem_base;
-        dev->dma_mem->device_base = device_addr;
-        dev->dma_mem->size = pages;
-        dev->dma_mem->flags = flags;
-
-        if (flags & DMA_MEMORY_MAP)
-                return DMA_MEMORY_MAP;
-
-        return DMA_MEMORY_IO;
-
- free1_out:
-        kfree(dev->dma_mem);
- iounmap_out:
-        iounmap(mem_base);
- out:
-        return 0;
-}
-EXPORT_SYMBOL(dma_declare_coherent_memory);
-
-void dma_release_declared_memory(struct device *dev)
-{
-        struct dma_coherent_mem *mem = dev->dma_mem;
-
-        if(!mem)
-                return;
-        dev->dma_mem = NULL;
-        iounmap(mem->virt_base);
-        kfree(mem->bitmap);
-        kfree(mem);
-}
-EXPORT_SYMBOL(dma_release_declared_memory);
-
-void *dma_mark_declared_memory_occupied(struct device *dev,
-                                        dma_addr_t device_addr, size_t size)
-{
-        struct dma_coherent_mem *mem = dev->dma_mem;
-        int pages = (size + (device_addr & ~PAGE_MASK) + PAGE_SIZE - 1) >> PAGE_SHIFT;
-        int pos, err;
-
-        if (!mem)
-                return ERR_PTR(-EINVAL);
-
-        pos = (device_addr - mem->device_base) >> PAGE_SHIFT;
-        err = bitmap_allocate_region(mem->bitmap, pos, get_order(pages));
-        if (err != 0)
-                return ERR_PTR(err);
-        return mem->virt_base + (pos << PAGE_SHIFT);
-}
-EXPORT_SYMBOL(dma_mark_declared_memory_occupied);
diff --git a/arch/ia64/mm/hugetlbpage.c b/arch/ia64/mm/hugetlbpage.c
index c45fc7f5a979..b0f615759e97 100644
--- a/arch/ia64/mm/hugetlbpage.c
+++ b/arch/ia64/mm/hugetlbpage.c
@@ -13,6 +13,7 @@
 #include <linux/mm.h>
 #include <linux/hugetlb.h>
 #include <linux/pagemap.h>
+#include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/sysctl.h>
 #include <linux/log2.h>
@@ -21,7 +22,8 @@
 #include <asm/tlb.h>
 #include <asm/tlbflush.h>
 
-unsigned int hpage_shift=HPAGE_SHIFT_DEFAULT;
+unsigned int hpage_shift = HPAGE_SHIFT_DEFAULT;
+EXPORT_SYMBOL(hpage_shift);
 
 pte_t *
 huge_pte_alloc(struct mm_struct *mm, unsigned long addr, unsigned long sz)
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index b4c4eaa5dd26..4da736e25333 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -3,6 +3,7 @@ config MIPS
         default y
         select HAVE_IDE
         select HAVE_OPROFILE
+        select HAVE_ARCH_KGDB
         # Horrible source of confusion.  Die, die, die ...
         select EMBEDDED
         select RTC_LIB
@@ -34,7 +35,6 @@ config BASLER_EXCITE
         select SYS_HAS_CPU_RM9000
         select SYS_SUPPORTS_32BIT_KERNEL
         select SYS_SUPPORTS_BIG_ENDIAN
-        select SYS_SUPPORTS_KGDB
         help
           The eXcite is a smart camera platform manufactured by
           Basler Vision Technologies AG.
@@ -280,7 +280,6 @@ config PMC_MSP
         select SYS_HAS_CPU_MIPS32_R2
         select SYS_SUPPORTS_32BIT_KERNEL
         select SYS_SUPPORTS_BIG_ENDIAN
-        select SYS_SUPPORTS_KGDB
         select IRQ_CPU
         select SERIAL_8250
         select SERIAL_8250_CONSOLE
@@ -306,7 +305,6 @@ config PMC_YOSEMITE
         select SYS_SUPPORTS_64BIT_KERNEL
         select SYS_SUPPORTS_BIG_ENDIAN
         select SYS_SUPPORTS_HIGHMEM
-        select SYS_SUPPORTS_KGDB
         select SYS_SUPPORTS_SMP
         help
           Yosemite is an evaluation board for the RM9000x2 processor
@@ -359,7 +357,6 @@ config SGI_IP27
         select SYS_HAS_CPU_R10000
         select SYS_SUPPORTS_64BIT_KERNEL
         select SYS_SUPPORTS_BIG_ENDIAN
-        select SYS_SUPPORTS_KGDB
         select SYS_SUPPORTS_NUMA
         select SYS_SUPPORTS_SMP
         select GENERIC_HARDIRQS_NO__DO_IRQ
@@ -475,7 +472,6 @@ config SIBYTE_SWARM
         select SYS_HAS_CPU_SB1
         select SYS_SUPPORTS_BIG_ENDIAN
         select SYS_SUPPORTS_HIGHMEM
-        select SYS_SUPPORTS_KGDB
         select SYS_SUPPORTS_LITTLE_ENDIAN
         select ZONE_DMA32 if 64BIT
 
@@ -868,7 +864,6 @@ config SOC_PNX8550
         select SYS_HAS_EARLY_PRINTK
         select SYS_SUPPORTS_32BIT_KERNEL
         select GENERIC_HARDIRQS_NO__DO_IRQ
-        select SYS_SUPPORTS_KGDB
         select GENERIC_GPIO
 
 config SWAP_IO_SPACE
diff --git a/arch/mips/Kconfig.debug b/arch/mips/Kconfig.debug
index f18cf92650e3..765c8e287d2b 100644
--- a/arch/mips/Kconfig.debug
+++ b/arch/mips/Kconfig.debug
@@ -34,28 +34,6 @@ config SMTC_IDLE_HOOK_DEBUG
           arch/mips/kernel/smtc.c.  This debugging option result in significant
           overhead so should be disabled in production kernels.
 
-config KGDB
-        bool "Remote GDB kernel debugging"
-        depends on DEBUG_KERNEL && SYS_SUPPORTS_KGDB
-        select DEBUG_INFO
-        help
-          If you say Y here, it will be possible to remotely debug the MIPS
-          kernel using gdb. This enlarges your kernel image disk size by
-          several megabytes and requires a machine with more than 16 MB,
-          better 32 MB RAM to avoid excessive linking time. This is only
-          useful for kernel hackers. If unsure, say N.
-
-config SYS_SUPPORTS_KGDB
-        bool
-
-config GDB_CONSOLE
-        bool "Console output to GDB"
-        depends on KGDB
-        help
-          If you are using GDB for remote debugging over a serial port and
-          would like kernel messages to be formatted into GDB $O packets so
-          that GDB prints them as program output, say 'Y'.
-
 config SB1XXX_CORELIS
         bool "Corelis Debugger"
         depends on SIBYTE_SB1xxx_SOC
diff --git a/arch/mips/au1000/Kconfig b/arch/mips/au1000/Kconfig
index 1fe97cccead1..e4a057d80ab6 100644
--- a/arch/mips/au1000/Kconfig
+++ b/arch/mips/au1000/Kconfig
@@ -134,4 +134,3 @@ config SOC_AU1X00
         select SYS_HAS_CPU_MIPS32_R1
         select SYS_SUPPORTS_32BIT_KERNEL
         select SYS_SUPPORTS_APM_EMULATION
-        select SYS_SUPPORTS_KGDB
diff --git a/arch/mips/au1000/common/Makefile b/arch/mips/au1000/common/Makefile
index dd0e19dacfcf..df48fd65bbf3 100644
--- a/arch/mips/au1000/common/Makefile
+++ b/arch/mips/au1000/common/Makefile
@@ -9,7 +9,6 @@ obj-y += prom.o irq.o puts.o time.o reset.o \
         au1xxx_irqmap.o clocks.o platform.o power.o setup.o \
         sleeper.o cputable.o dma.o dbdma.o gpio.o
 
-obj-$(CONFIG_KGDB)              += dbg_io.o
 obj-$(CONFIG_PCI)               += pci.o
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/au1000/common/dbg_io.c b/arch/mips/au1000/common/dbg_io.c
deleted file mode 100644
index af5be7df2f2a..000000000000
--- a/arch/mips/au1000/common/dbg_io.c
+++ /dev/null
@@ -1,109 +0,0 @@
-#include <linux/types.h>
-
-#include <asm/mach-au1x00/au1000.h>
-
-#ifdef CONFIG_KGDB
-
-/*
- * FIXME the user should be able to select the
- * uart to be used for debugging.
- */
-#define DEBUG_BASE  UART_DEBUG_BASE
-
-#define         UART16550_BAUD_2400             2400
-#define         UART16550_BAUD_4800             4800
-#define         UART16550_BAUD_9600             9600
-#define         UART16550_BAUD_19200            19200
-#define         UART16550_BAUD_38400            38400
-#define         UART16550_BAUD_57600            57600
-#define         UART16550_BAUD_115200           115200
-
-#define         UART16550_PARITY_NONE           0
-#define         UART16550_PARITY_ODD            0x08
-#define         UART16550_PARITY_EVEN           0x18
-#define         UART16550_PARITY_MARK           0x28
-#define         UART16550_PARITY_SPACE          0x38
-
-#define         UART16550_DATA_5BIT             0x0
-#define         UART16550_DATA_6BIT             0x1
-#define         UART16550_DATA_7BIT             0x2
-#define         UART16550_DATA_8BIT             0x3
-
-#define         UART16550_STOP_1BIT             0x0
-#define         UART16550_STOP_2BIT             0x4
-
-
-#define UART_RX         0       /* Receive buffer */
-#define UART_TX         4       /* Transmit buffer */
-#define UART_IER        8       /* Interrupt Enable Register */
-#define UART_IIR        0xC     /* Interrupt ID Register */
-#define UART_FCR        0x10    /* FIFO Control Register */
-#define UART_LCR        0x14    /* Line Control Register */
-#define UART_MCR        0x18    /* Modem Control Register */
-#define UART_LSR        0x1C    /* Line Status Register */
-#define UART_MSR        0x20    /* Modem Status Register */
-#define UART_CLK        0x28    /* Baud Rat4e Clock Divider */
-#define UART_MOD_CNTRL  0x100   /* Module Control */
-
-/* memory-mapped read/write of the port */
-#define UART16550_READ(y)     (au_readl(DEBUG_BASE + y) & 0xff)
-#define UART16550_WRITE(y, z) (au_writel(z & 0xff, DEBUG_BASE + y))
-
-extern unsigned long calc_clock(void);
-
-void debugInit(u32 baud, u8 data, u8 parity, u8 stop)
-{
-        if (UART16550_READ(UART_MOD_CNTRL) != 0x3)
-                UART16550_WRITE(UART_MOD_CNTRL, 3);
-        calc_clock();
-
-        /* disable interrupts */
-        UART16550_WRITE(UART_IER, 0);
-
-        /* set up baud rate */
-        {
-                u32 divisor;
-
-                /* set divisor */
-                divisor = get_au1x00_uart_baud_base() / baud;
-                UART16550_WRITE(UART_CLK, divisor & 0xffff);
-        }
-
-        /* set data format */
-        UART16550_WRITE(UART_LCR, (data | parity | stop));
-}
-
-static int remoteDebugInitialized;
-
-u8 getDebugChar(void)
-{
-        if (!remoteDebugInitialized) {
-                remoteDebugInitialized = 1;
-                debugInit(UART16550_BAUD_115200,
-                          UART16550_DATA_8BIT,
-                          UART16550_PARITY_NONE,
-                          UART16550_STOP_1BIT);
-        }
-
-        while ((UART16550_READ(UART_LSR) & 0x1) == 0);
-        return UART16550_READ(UART_RX);
-}
-
-
-int putDebugChar(u8 byte)
-{
-        if (!remoteDebugInitialized) {
-                remoteDebugInitialized = 1;
-                debugInit(UART16550_BAUD_115200,
-                          UART16550_DATA_8BIT,
-                          UART16550_PARITY_NONE,
-                          UART16550_STOP_1BIT);
-        }
-
-        while ((UART16550_READ(UART_LSR) & 0x40) == 0);
-        UART16550_WRITE(UART_TX, byte);
-
-        return 1;
-}
-
-#endif
diff --git a/arch/mips/au1000/db1x00/init.c b/arch/mips/au1000/db1x00/init.c
index 5ebe0de5e459..847413514964 100644
--- a/arch/mips/au1000/db1x00/init.c
+++ b/arch/mips/au1000/db1x00/init.c
@@ -57,6 +57,6 @@ void __init prom_init(void)
         if (!memsize_str)
                 memsize = 0x04000000;
         else
-                memsize = strict_strtol(memsize_str, 0, NULL);
+                strict_strtol(memsize_str, 0, &memsize);
         add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
diff --git a/arch/mips/au1000/mtx-1/init.c b/arch/mips/au1000/mtx-1/init.c
index 33a4aebe0cba..3bae13c28954 100644
--- a/arch/mips/au1000/mtx-1/init.c
+++ b/arch/mips/au1000/mtx-1/init.c
@@ -55,6 +55,6 @@ void __init prom_init(void)
         if (!memsize_str)
                 memsize = 0x04000000;
         else
-                memsize = strict_strtol(memsize_str, 0, NULL);
+                strict_strtol(memsize_str, 0, &memsize);
         add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
diff --git a/arch/mips/au1000/pb1000/init.c b/arch/mips/au1000/pb1000/init.c
index 3837365d613d..8a9c7d57208d 100644
--- a/arch/mips/au1000/pb1000/init.c
+++ b/arch/mips/au1000/pb1000/init.c
@@ -52,6 +52,6 @@ void __init prom_init(void)
         if (!memsize_str)
                 memsize = 0x04000000;
         else
-                memsize = strict_strtol(memsize_str, 0, NULL);
+                strict_strtol(memsize_str, 0, &memsize);
         add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
diff --git a/arch/mips/au1000/pb1100/init.c b/arch/mips/au1000/pb1100/init.c
index 8355483f3de2..7c6792308bc5 100644
--- a/arch/mips/au1000/pb1100/init.c
+++ b/arch/mips/au1000/pb1100/init.c
@@ -54,7 +54,7 @@ void __init prom_init(void)
         if (!memsize_str)
                 memsize = 0x04000000;
         else
-                memsize = strict_strtol(memsize_str, 0, NULL);
+                strict_strtol(memsize_str, 0, &memsize);
 
         add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
diff --git a/arch/mips/au1000/pb1200/init.c b/arch/mips/au1000/pb1200/init.c
index 09fd63b86062..e9b2a0fd48ae 100644
--- a/arch/mips/au1000/pb1200/init.c
+++ b/arch/mips/au1000/pb1200/init.c
@@ -53,6 +53,6 @@ void __init prom_init(void)
         if (!memsize_str)
                 memsize = 0x08000000;
         else
-                memsize = strict_strtol(memsize_str, 0, NULL);
+                strict_strtol(memsize_str, 0, &memsize);
         add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
diff --git a/arch/mips/au1000/pb1500/init.c b/arch/mips/au1000/pb1500/init.c
index 49f51e165863..3b6e395cf952 100644
--- a/arch/mips/au1000/pb1500/init.c
+++ b/arch/mips/au1000/pb1500/init.c
@@ -53,6 +53,6 @@ void __init prom_init(void)
         if (!memsize_str)
                 memsize = 0x04000000;
         else
-                memsize = strict_strtol(memsize_str, 0, NULL);
+                strict_strtol(memsize_str, 0, &memsize);
         add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
diff --git a/arch/mips/au1000/pb1550/init.c b/arch/mips/au1000/pb1550/init.c
index 1b5f58434bb7..e1055a13a1a0 100644
--- a/arch/mips/au1000/pb1550/init.c
+++ b/arch/mips/au1000/pb1550/init.c
@@ -53,6 +53,6 @@ void __init prom_init(void)
         if (!memsize_str)
                 memsize = 0x08000000;
         else
-                memsize = strict_strtol(memsize_str, 0, NULL);
+                strict_strtol(memsize_str, 0, &memsize);
         add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
diff --git a/arch/mips/au1000/xxs1500/init.c b/arch/mips/au1000/xxs1500/init.c
index b849bf501c04..7516434760a1 100644
--- a/arch/mips/au1000/xxs1500/init.c
+++ b/arch/mips/au1000/xxs1500/init.c
@@ -53,6 +53,6 @@ void __init prom_init(void)
         if (!memsize_str)
                 memsize = 0x04000000;
         else
-                memsize = strict_strtol(memsize_str, 0, NULL);
+                strict_strtol(memsize_str, 0, &memsize);
         add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
diff --git a/arch/mips/basler/excite/Makefile b/arch/mips/basler/excite/Makefile
index 519142c2e4ef..cff29cf46d03 100644
--- a/arch/mips/basler/excite/Makefile
+++ b/arch/mips/basler/excite/Makefile
@@ -5,5 +5,4 @@
 obj-$(CONFIG_BASLER_EXCITE)     += excite_irq.o excite_prom.o excite_setup.o \
                                    excite_device.o excite_procfs.o
 
-obj-$(CONFIG_KGDB)              += excite_dbg_io.o
 obj-m                           += excite_iodev.o
diff --git a/arch/mips/basler/excite/excite_dbg_io.c b/arch/mips/basler/excite/excite_dbg_io.c
deleted file mode 100644
index d289e3a868cf..000000000000
--- a/arch/mips/basler/excite/excite_dbg_io.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- *  Copyright (C) 2004 by Basler Vision Technologies AG
- *  Author: Thomas Koeller <thomas.koeller@baslerweb.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <asm/gdb-stub.h>
-#include <asm/rm9k-ocd.h>
-#include <excite.h>
-
-#if defined(CONFIG_SERIAL_8250) && CONFIG_SERIAL_8250_NR_UARTS > 1
-#error Debug port used by serial driver
-#endif
-
-#define UART_CLK                25000000
-#define BASE_BAUD               (UART_CLK / 16)
-#define REGISTER_BASE_0         0x0208UL
-#define REGISTER_BASE_1         0x0238UL
-
-#define REGISTER_BASE_DBG       REGISTER_BASE_1
-
-#define CPRR    0x0004
-#define UACFG   0x0200
-#define UAINTS  0x0204
-#define UARBR   (REGISTER_BASE_DBG + 0x0000)
-#define UATHR   (REGISTER_BASE_DBG + 0x0004)
-#define UADLL   (REGISTER_BASE_DBG + 0x0008)
-#define UAIER   (REGISTER_BASE_DBG + 0x000c)
-#define UADLH   (REGISTER_BASE_DBG + 0x0010)
-#define UAIIR   (REGISTER_BASE_DBG + 0x0014)
-#define UAFCR   (REGISTER_BASE_DBG + 0x0018)
-#define UALCR   (REGISTER_BASE_DBG + 0x001c)
-#define UAMCR   (REGISTER_BASE_DBG + 0x0020)
-#define UALSR   (REGISTER_BASE_DBG + 0x0024)
-#define UAMSR   (REGISTER_BASE_DBG + 0x0028)
-#define UASCR   (REGISTER_BASE_DBG + 0x002c)
-
-#define PARITY_NONE     0
-#define PARITY_ODD      0x08
-#define PARITY_EVEN     0x18
-#define PARITY_MARK     0x28
-#define PARITY_SPACE    0x38
-
-#define DATA_5BIT       0x0
-#define DATA_6BIT       0x1
-#define DATA_7BIT       0x2
-#define DATA_8BIT       0x3
-
-#define STOP_1BIT       0x0
-#define STOP_2BIT       0x4
-
-#define BAUD_DBG        57600
-#define PARITY_DBG      PARITY_NONE
-#define DATA_DBG        DATA_8BIT
-#define STOP_DBG        STOP_1BIT
-
-/* Initialize the serial port for KGDB debugging */
-void __init excite_kgdb_init(void)
-{
-        const u32 divisor = BASE_BAUD / BAUD_DBG;
-
-        /* Take the UART out of reset */
-        titan_writel(0x00ff1cff, CPRR);
-        titan_writel(0x00000000, UACFG);
-        titan_writel(0x00000002, UACFG);
-
-        titan_writel(0x0, UALCR);
-        titan_writel(0x0, UAIER);
-
-        /* Disable FIFOs */
-        titan_writel(0x00, UAFCR);
-
-        titan_writel(0x80, UALCR);
-        titan_writel(divisor & 0xff, UADLL);
-        titan_writel((divisor & 0xff00) >> 8, UADLH);
-        titan_writel(0x0, UALCR);
-
-        titan_writel(DATA_DBG | PARITY_DBG | STOP_DBG, UALCR);
-
-        /* Enable receiver interrupt */
-        titan_readl(UARBR);
-        titan_writel(0x1, UAIER);
-}
-
-int getDebugChar(void)
-{
-        while (!(titan_readl(UALSR) & 0x1));
-        return titan_readl(UARBR);
-}
-
-int putDebugChar(int data)
-{
-        while (!(titan_readl(UALSR) & 0x20));
-        titan_writel(data, UATHR);
-        return 1;
-}
-
-/* KGDB interrupt handler */
-asmlinkage void excite_kgdb_inthdl(void)
-{
-        if (unlikely(
-                ((titan_readl(UAIIR) & 0x7) == 4)
-                && ((titan_readl(UARBR) & 0xff) == 0x3)))
-                        set_async_breakpoint(&regs->cp0_epc);
-}
diff --git a/arch/mips/basler/excite/excite_irq.c b/arch/mips/basler/excite/excite_irq.c
index 4903e067916b..934e0a6b1011 100644
--- a/arch/mips/basler/excite/excite_irq.c
+++ b/arch/mips/basler/excite/excite_irq.c
@@ -50,10 +50,6 @@ void __init arch_init_irq(void)
         mips_cpu_irq_init();
         rm7k_cpu_irq_init();
         rm9k_cpu_irq_init();
-
-#ifdef CONFIG_KGDB
-        excite_kgdb_init();
-#endif
 }
 
 asmlinkage void plat_irq_dispatch(void)
@@ -90,9 +86,6 @@ asmlinkage void plat_irq_dispatch(void)
         msgint      = msgintflags & msgintmask & (0x1 << (TITAN_MSGINT % 0x20));
         if ((pending & (1 << TITAN_IRQ)) && msgint) {
                 ocd_writel(msgint, INTP0Clear0 + (TITAN_MSGINT / 0x20 * 0x10));
-#if defined(CONFIG_KGDB)
-                excite_kgdb_inthdl();
-#endif
                 do_IRQ(TITAN_IRQ);
                 return;
         }
diff --git a/arch/mips/basler/excite/excite_setup.c b/arch/mips/basler/excite/excite_setup.c
index 6dd8f0d46d09..d66b3b8edf2a 100644
--- a/arch/mips/basler/excite/excite_setup.c
+++ b/arch/mips/basler/excite/excite_setup.c
@@ -95,13 +95,13 @@ static int __init excite_init_console(void)
         /* Take the DUART out of reset */
         titan_writel(0x00ff1cff, CPRR);
 
-#if defined(CONFIG_KGDB) || (CONFIG_SERIAL_8250_NR_UARTS > 1)
+#if (CONFIG_SERIAL_8250_NR_UARTS > 1)
         /* Enable both ports */
         titan_writel(MASK_SER0 | MASK_SER1, UACFG);
 #else
         /* Enable port #0 only */
         titan_writel(MASK_SER0, UACFG);
-#endif  /* defined(CONFIG_KGDB) */
+#endif
 
         /*
          * Set up serial port #0. Do not use autodetection; the result is
diff --git a/arch/mips/configs/cobalt_defconfig b/arch/mips/configs/cobalt_defconfig
index 2678b7ec3351..eb44b72254af 100644
--- a/arch/mips/configs/cobalt_defconfig
+++ b/arch/mips/configs/cobalt_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc5
-# Thu Sep  6 13:14:29 2007
+# Linux kernel version: 2.6.26
+# Fri Jul 25 10:25:34 2008
 #
 CONFIG_MIPS=y
 
@@ -10,9 +10,11 @@ CONFIG_MIPS=y
 #
 # CONFIG_MACH_ALCHEMY is not set
 # CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
 CONFIG_MIPS_COBALT=y
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_LEMOTE_FULONG is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SIM is not set
@@ -24,6 +26,7 @@ CONFIG_MIPS_COBALT=y
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
 # CONFIG_SGI_IP32 is not set
 # CONFIG_SIBYTE_CRHINE is not set
 # CONFIG_SIBYTE_CARMEL is not set
@@ -34,19 +37,25 @@ CONFIG_MIPS_COBALT=y
 # CONFIG_SIBYTE_SENTOSA is not set
 # CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
 # CONFIG_WR_PPMC is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_GT641XX=y
+CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_EARLY_PRINTK=y
@@ -108,6 +117,7 @@ CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -115,10 +125,16 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -151,23 +167,28 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
@@ -177,23 +198,37 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -207,18 +242,18 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
 CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+CONFIG_I8253=y
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 
@@ -232,8 +267,8 @@ CONFIG_TRAD_SIGNALS=y
 #
 # Power management options
 #
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
 
 #
 # Networking
@@ -250,6 +285,7 @@ CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@@ -269,6 +305,7 @@ CONFIG_IP_FIB_HASH=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -276,8 +313,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -294,10 +329,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -305,6 +336,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -326,9 +358,12 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
@@ -337,6 +372,7 @@ CONFIG_MTD=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -350,6 +386,7 @@ CONFIG_MTD_BLKDEVS=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -384,6 +421,7 @@ CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_PHYSMAP_START=0x0
 CONFIG_MTD_PHYSMAP_LEN=0x0
 CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_INTEL_VR_NOR is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -423,7 +461,9 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -462,10 +502,15 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
@@ -475,7 +520,6 @@ CONFIG_ATA=y
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
 # CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
@@ -504,7 +548,9 @@ CONFIG_ATA=y
 # CONFIG_PATA_MPIIX is not set
 # CONFIG_PATA_OLDPIIX is not set
 # CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
 # CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
 # CONFIG_PATA_OPTIDMA is not set
 # CONFIG_PATA_PDC_OLD is not set
@@ -518,29 +564,27 @@ CONFIG_ATA=y
 CONFIG_PATA_VIA=y
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
+# CONFIG_FUSION is not set
 
 #
-# Fusion MPT device support
+# IEEE 1394 (FireWire) support
 #
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
 
 #
-# IEEE 1394 (FireWire) support
+# Enable only one of the two stacks, unless you know what you are doing
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
@@ -562,7 +606,12 @@ CONFIG_TULIP=y
 # CONFIG_DM9102 is not set
 # CONFIG_ULI526X is not set
 # CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 # CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
@@ -572,6 +621,7 @@ CONFIG_TULIP=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -580,7 +630,6 @@ CONFIG_TULIP=y
 # CONFIG_USB_KAWETH is not set
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
 # CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
@@ -588,7 +637,6 @@ CONFIG_TULIP=y
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -607,7 +655,6 @@ CONFIG_INPUT_POLLDEV=y
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
@@ -642,7 +689,9 @@ CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -664,65 +713,122 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-CONFIG_COBALT_LCD=y
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
 # Graphics support
 #
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+CONFIG_FB_COBALT=y
+# CONFIG_FB_VIRTUAL is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
 
 #
 # Console display driver support
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
 # CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
 
 #
 # USB Input Devices
@@ -743,6 +849,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=m
 # CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
@@ -751,15 +858,18 @@ CONFIG_USB=m
 # CONFIG_USB_DEVICE_CLASS is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=m
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -773,6 +883,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -785,6 +896,7 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
 # CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
@@ -793,6 +905,7 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
@@ -800,15 +913,11 @@ CONFIG_USB_STORAGE=m
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
+# CONFIG_USB_MON is not set
 
 #
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 # CONFIG_USB_SERIAL is not set
 
 #
@@ -833,16 +942,10 @@ CONFIG_USB_MON=y
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 
@@ -858,6 +961,8 @@ CONFIG_LEDS_COBALT_RAQ=y
 CONFIG_LEDS_TRIGGERS=y
 # CONFIG_LEDS_TRIGGER_TIMER is not set
 # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
@@ -882,9 +987,10 @@ CONFIG_RTC_INTF_DEV=y
 # Platform RTC drivers
 #
 CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
@@ -892,23 +998,7 @@ CONFIG_RTC_DRV_CMOS=y
 #
 # on-CPU RTC drivers
 #
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -923,22 +1013,22 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
+CONFIG_EXT4DEV_FS=y
+CONFIG_EXT4DEV_FS_XATTR=y
+CONFIG_EXT4DEV_FS_POSIX_ACL=y
+CONFIG_EXT4DEV_FS_SECURITY=y
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -967,7 +1057,6 @@ CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 CONFIG_CONFIGFS_FS=y
 
 #
@@ -983,32 +1072,28 @@ CONFIG_CONFIGFS_FS=y
 # CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=y
 CONFIG_NFSD_V2_ACL=y
 CONFIG_NFSD_V3=y
 CONFIG_NFSD_V3_ACL=y
 # CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_ACL_SUPPORT=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1022,34 +1107,26 @@ CONFIG_SUNRPC=y
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 # CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_CROSSCOMPILE=y
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_SAMPLES is not set
 CONFIG_CMDLINE=""
 
 #
@@ -1057,14 +1134,95 @@ CONFIG_CMDLINE=""
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/mips/configs/db1000_defconfig b/arch/mips/configs/db1000_defconfig
index ebb8ad62b3a3..a279165e3a7d 100644
--- a/arch/mips/configs/db1000_defconfig
+++ b/arch/mips/configs/db1000_defconfig
@@ -1092,7 +1092,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
diff --git a/arch/mips/configs/db1100_defconfig b/arch/mips/configs/db1100_defconfig
index ad4e5ef65592..8944d15caf13 100644
--- a/arch/mips/configs/db1100_defconfig
+++ b/arch/mips/configs/db1100_defconfig
@@ -1092,7 +1092,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
diff --git a/arch/mips/configs/db1200_defconfig b/arch/mips/configs/db1200_defconfig
index d0dc2e83ad35..ab17973107fd 100644
--- a/arch/mips/configs/db1200_defconfig
+++ b/arch/mips/configs/db1200_defconfig
@@ -1174,7 +1174,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE="mem=48M"
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
diff --git a/arch/mips/configs/db1500_defconfig b/arch/mips/configs/db1500_defconfig
index 9155082313c8..b65803f19352 100644
--- a/arch/mips/configs/db1500_defconfig
+++ b/arch/mips/configs/db1500_defconfig
@@ -1392,7 +1392,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
diff --git a/arch/mips/configs/db1550_defconfig b/arch/mips/configs/db1550_defconfig
index e4e324422cd9..a190ac07740b 100644
--- a/arch/mips/configs/db1550_defconfig
+++ b/arch/mips/configs/db1550_defconfig
@@ -1209,7 +1209,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
diff --git a/arch/mips/configs/excite_defconfig b/arch/mips/configs/excite_defconfig
index 3572e80356d2..4e465e945991 100644
--- a/arch/mips/configs/excite_defconfig
+++ b/arch/mips/configs/excite_defconfig
@@ -1269,7 +1269,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig
index 138c575a0151..831d3e5a1ea6 100644
--- a/arch/mips/configs/ip27_defconfig
+++ b/arch/mips/configs/ip27_defconfig
@@ -943,7 +943,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
diff --git a/arch/mips/configs/msp71xx_defconfig b/arch/mips/configs/msp71xx_defconfig
index 59d19472b161..dd13db4d0fb9 100644
--- a/arch/mips/configs/msp71xx_defconfig
+++ b/arch/mips/configs/msp71xx_defconfig
@@ -1415,8 +1415,6 @@ CONFIG_FORCED_INLINING=y
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_KGDB is not set
-CONFIG_SYS_SUPPORTS_KGDB=y
 # CONFIG_RUNTIME_DEBUG is not set
 # CONFIG_MIPS_UNCACHED is not set
 
diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig
index bacf0dd0e345..db9272677aa2 100644
--- a/arch/mips/configs/mtx1_defconfig
+++ b/arch/mips/configs/mtx1_defconfig
@@ -3020,7 +3020,6 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
diff --git a/arch/mips/configs/pb1100_defconfig b/arch/mips/configs/pb1100_defconfig
index 6dfe6f793cef..9e21e333a2fc 100644
--- a/arch/mips/configs/pb1100_defconfig
+++ b/arch/mips/configs/pb1100_defconfig
@@ -1085,7 +1085,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
diff --git a/arch/mips/configs/pb1500_defconfig b/arch/mips/configs/pb1500_defconfig
index c965a87e6a96..af67ed4f71ae 100644
--- a/arch/mips/configs/pb1500_defconfig
+++ b/arch/mips/configs/pb1500_defconfig
@@ -1202,7 +1202,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
diff --git a/arch/mips/configs/pb1550_defconfig b/arch/mips/configs/pb1550_defconfig
index 0778996c682f..7956f56cbf3e 100644
--- a/arch/mips/configs/pb1550_defconfig
+++ b/arch/mips/configs/pb1550_defconfig
@@ -1195,7 +1195,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
diff --git a/arch/mips/configs/pnx8550-jbs_defconfig b/arch/mips/configs/pnx8550-jbs_defconfig
index 37c7b5ffd474..723bd5176a35 100644
--- a/arch/mips/configs/pnx8550-jbs_defconfig
+++ b/arch/mips/configs/pnx8550-jbs_defconfig
@@ -1216,10 +1216,8 @@ CONFIG_DEBUG_MUTEXES=y
 CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE="console=ttyS1,38400n8 kgdb=ttyS0 root=/dev/nfs ip=bootp"
+CONFIG_CMDLINE="console=ttyS1,38400n8 root=/dev/nfs ip=bootp"
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_KGDB is not set
-CONFIG_SYS_SUPPORTS_KGDB=y
 # CONFIG_RUNTIME_DEBUG is not set
 
 #
diff --git a/arch/mips/configs/pnx8550-stb810_defconfig b/arch/mips/configs/pnx8550-stb810_defconfig
index 893e5c4ab66d..b5052fb42e9e 100644
--- a/arch/mips/configs/pnx8550-stb810_defconfig
+++ b/arch/mips/configs/pnx8550-stb810_defconfig
@@ -1206,10 +1206,8 @@ CONFIG_DEBUG_SLAB=y
 CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE="console=ttyS1,38400n8 kgdb=ttyS0 root=/dev/nfs ip=bootp"
+CONFIG_CMDLINE="console=ttyS1,38400n8 root=/dev/nfs ip=bootp"
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_KGDB is not set
-CONFIG_SYS_SUPPORTS_KGDB=y
 # CONFIG_RUNTIME_DEBUG is not set
 
 #
diff --git a/arch/mips/configs/rbtx49xx_defconfig b/arch/mips/configs/rbtx49xx_defconfig
index e42aed5a38bb..c7c0864b8ce9 100644
--- a/arch/mips/configs/rbtx49xx_defconfig
+++ b/arch/mips/configs/rbtx49xx_defconfig
@@ -742,7 +742,6 @@ CONFIG_DEBUG_FS=y
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_SAMPLES is not set
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
diff --git a/arch/mips/configs/sb1250-swarm_defconfig b/arch/mips/configs/sb1250-swarm_defconfig
index 1ea97865f2ce..a9acaa2f9da3 100644
--- a/arch/mips/configs/sb1250-swarm_defconfig
+++ b/arch/mips/configs/sb1250-swarm_defconfig
@@ -963,7 +963,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_SAMPLES is not set
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 # CONFIG_SB1XXX_CORELIS is not set
 
 #
diff --git a/arch/mips/configs/yosemite_defconfig b/arch/mips/configs/yosemite_defconfig
index 7f86c43d1bda..ea8249c75b3f 100644
--- a/arch/mips/configs/yosemite_defconfig
+++ b/arch/mips/configs/yosemite_defconfig
@@ -827,8 +827,6 @@ CONFIG_FORCED_INLINING=y
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_KGDB is not set
-CONFIG_SYS_SUPPORTS_KGDB=y
 # CONFIG_RUNTIME_DEBUG is not set
 
 #
diff --git a/arch/mips/emma2rh/markeins/platform.c b/arch/mips/emma2rh/markeins/platform.c
index 11567702b155..d70627de7cfe 100644
--- a/arch/mips/emma2rh/markeins/platform.c
+++ b/arch/mips/emma2rh/markeins/platform.c
@@ -34,7 +34,6 @@
 #include <asm/bcache.h>
 #include <asm/irq.h>
 #include <asm/reboot.h>
-#include <asm/gdb-stub.h>
 #include <asm/traps.h>
 #include <asm/debug.h>
 
diff --git a/arch/mips/emma2rh/markeins/setup.c b/arch/mips/emma2rh/markeins/setup.c
index 62bfb455d1b1..a56c4b804b07 100644
--- a/arch/mips/emma2rh/markeins/setup.c
+++ b/arch/mips/emma2rh/markeins/setup.c
@@ -41,7 +41,6 @@
 #include <asm/bcache.h>
 #include <asm/irq.h>
 #include <asm/reboot.h>
-#include <asm/gdb-stub.h>
 #include <asm/traps.h>
 #include <asm/debug.h>
 
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index 0fd31974ba28..706f93974797 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -71,7 +71,7 @@ obj-$(CONFIG_MIPS32_COMPAT)	+= linux32.o ptrace32.o signal32.o
 obj-$(CONFIG_MIPS32_N32)        += binfmt_elfn32.o scall64-n32.o signal_n32.o
 obj-$(CONFIG_MIPS32_O32)        += binfmt_elfo32.o scall64-o32.o
 
-obj-$(CONFIG_KGDB)              += gdb-low.o gdb-stub.o
+obj-$(CONFIG_KGDB)              += kgdb.o
 obj-$(CONFIG_PROC_FS)           += proc.o
 
 obj-$(CONFIG_64BIT)             += cpu-bugs64.o
diff --git a/arch/mips/kernel/gdb-low.S b/arch/mips/kernel/gdb-low.S
deleted file mode 100644
index 2c446063636a..000000000000
--- a/arch/mips/kernel/gdb-low.S
+++ /dev/null
@@ -1,394 +0,0 @@
-/*
- * gdb-low.S contains the low-level trap handler for the GDB stub.
- *
- * Copyright (C) 1995 Andreas Busse
- */
-#include <linux/sys.h>
-
-#include <asm/asm.h>
-#include <asm/errno.h>
-#include <asm/irqflags.h>
-#include <asm/mipsregs.h>
-#include <asm/regdef.h>
-#include <asm/stackframe.h>
-#include <asm/gdb-stub.h>
-
-#ifdef CONFIG_32BIT
-#define DMFC0   mfc0
-#define DMTC0   mtc0
-#define LDC1    lwc1
-#define SDC1    lwc1
-#endif
-#ifdef CONFIG_64BIT
-#define DMFC0   dmfc0
-#define DMTC0   dmtc0
-#define LDC1    ldc1
-#define SDC1    ldc1
-#endif
-
-/*
- * [jsun] We reserves about 2x GDB_FR_SIZE in stack.  The lower (addressed)
- * part is used to store registers and passed to exception handler.
- * The upper part is reserved for "call func" feature where gdb client
- * saves some of the regs, setups call frame and passes args.
- *
- * A trace shows about 200 bytes are used to store about half of all regs.
- * The rest should be big enough for frame setup and passing args.
- */
-
-/*
- * The low level trap handler
- */
-                .align  5
-                NESTED(trap_low, GDB_FR_SIZE, sp)
-                .set    noat
-                .set    noreorder
-
-                mfc0    k0, CP0_STATUS
-                sll     k0, 3                   /* extract cu0 bit */
-                bltz    k0, 1f
-                move    k1, sp
-
-                /*
-                 * Called from user mode, go somewhere else.
-                 */
-                mfc0    k0, CP0_CAUSE
-                andi    k0, k0, 0x7c
-#ifdef CONFIG_64BIT
-                dsll    k0, k0, 1
-#endif
-                PTR_L   k1, saved_vectors(k0)
-                jr      k1
-                nop
-1:
-                move    k0, sp
-                PTR_SUBU sp, k1, GDB_FR_SIZE*2  # see comment above
-                LONG_S  k0, GDB_FR_REG29(sp)
-                LONG_S  $2, GDB_FR_REG2(sp)
-
-/*
- * First save the CP0 and special registers
- */
-
-                mfc0    v0, CP0_STATUS
-                LONG_S  v0, GDB_FR_STATUS(sp)
-                mfc0    v0, CP0_CAUSE
-                LONG_S  v0, GDB_FR_CAUSE(sp)
-                DMFC0   v0, CP0_EPC
-                LONG_S  v0, GDB_FR_EPC(sp)
-                DMFC0   v0, CP0_BADVADDR
-                LONG_S  v0, GDB_FR_BADVADDR(sp)
-                mfhi    v0
-                LONG_S  v0, GDB_FR_HI(sp)
-                mflo    v0
-                LONG_S  v0, GDB_FR_LO(sp)
-
-/*
- * Now the integer registers
- */
-
-                LONG_S  zero, GDB_FR_REG0(sp)           /* I know... */
-                LONG_S  $1, GDB_FR_REG1(sp)
-                /* v0 already saved */
-                LONG_S  $3, GDB_FR_REG3(sp)
-                LONG_S  $4, GDB_FR_REG4(sp)
-                LONG_S  $5, GDB_FR_REG5(sp)
-                LONG_S  $6, GDB_FR_REG6(sp)
-                LONG_S  $7, GDB_FR_REG7(sp)
-                LONG_S  $8, GDB_FR_REG8(sp)
-                LONG_S  $9, GDB_FR_REG9(sp)
-                LONG_S  $10, GDB_FR_REG10(sp)
-                LONG_S  $11, GDB_FR_REG11(sp)
-                LONG_S  $12, GDB_FR_REG12(sp)
-                LONG_S  $13, GDB_FR_REG13(sp)
-                LONG_S  $14, GDB_FR_REG14(sp)
-                LONG_S  $15, GDB_FR_REG15(sp)
-                LONG_S  $16, GDB_FR_REG16(sp)
-                LONG_S  $17, GDB_FR_REG17(sp)
-                LONG_S  $18, GDB_FR_REG18(sp)
-                LONG_S  $19, GDB_FR_REG19(sp)
-                LONG_S  $20, GDB_FR_REG20(sp)
-                LONG_S  $21, GDB_FR_REG21(sp)
-                LONG_S  $22, GDB_FR_REG22(sp)
-                LONG_S  $23, GDB_FR_REG23(sp)
-                LONG_S  $24, GDB_FR_REG24(sp)
-                LONG_S  $25, GDB_FR_REG25(sp)
-                LONG_S  $26, GDB_FR_REG26(sp)
-                LONG_S  $27, GDB_FR_REG27(sp)
-                LONG_S  $28, GDB_FR_REG28(sp)
-                /* sp already saved */
-                LONG_S  $30, GDB_FR_REG30(sp)
-                LONG_S  $31, GDB_FR_REG31(sp)
-
-                CLI                             /* disable interrupts */
-                TRACE_IRQS_OFF
-
-/*
- * Followed by the floating point registers
- */
-                mfc0    v0, CP0_STATUS          /* FPU enabled? */
-                srl     v0, v0, 16
-                andi    v0, v0, (ST0_CU1 >> 16)
-
-                beqz    v0,2f                   /* disabled, skip */
-                 nop
-
-                SDC1    $0, GDB_FR_FPR0(sp)
-                SDC1    $1, GDB_FR_FPR1(sp)
-                SDC1    $2, GDB_FR_FPR2(sp)
-                SDC1    $3, GDB_FR_FPR3(sp)
-                SDC1    $4, GDB_FR_FPR4(sp)
-                SDC1    $5, GDB_FR_FPR5(sp)
-                SDC1    $6, GDB_FR_FPR6(sp)
-                SDC1    $7, GDB_FR_FPR7(sp)
-                SDC1    $8, GDB_FR_FPR8(sp)
-                SDC1    $9, GDB_FR_FPR9(sp)
-                SDC1    $10, GDB_FR_FPR10(sp)
-                SDC1    $11, GDB_FR_FPR11(sp)
-                SDC1    $12, GDB_FR_FPR12(sp)
-                SDC1    $13, GDB_FR_FPR13(sp)
-                SDC1    $14, GDB_FR_FPR14(sp)
-                SDC1    $15, GDB_FR_FPR15(sp)
-                SDC1    $16, GDB_FR_FPR16(sp)
-                SDC1    $17, GDB_FR_FPR17(sp)
-                SDC1    $18, GDB_FR_FPR18(sp)
-                SDC1    $19, GDB_FR_FPR19(sp)
-                SDC1    $20, GDB_FR_FPR20(sp)
-                SDC1    $21, GDB_FR_FPR21(sp)
-                SDC1    $22, GDB_FR_FPR22(sp)
-                SDC1    $23, GDB_FR_FPR23(sp)
-                SDC1    $24, GDB_FR_FPR24(sp)
-                SDC1    $25, GDB_FR_FPR25(sp)
-                SDC1    $26, GDB_FR_FPR26(sp)
-                SDC1    $27, GDB_FR_FPR27(sp)
-                SDC1    $28, GDB_FR_FPR28(sp)
-                SDC1    $29, GDB_FR_FPR29(sp)
-                SDC1    $30, GDB_FR_FPR30(sp)
-                SDC1    $31, GDB_FR_FPR31(sp)
-
-/*
- * FPU control registers
- */
-
-                cfc1    v0, CP1_STATUS
-                LONG_S  v0, GDB_FR_FSR(sp)
-                cfc1    v0, CP1_REVISION
-                LONG_S  v0, GDB_FR_FIR(sp)
-
-/*
- * Current stack frame ptr
- */
-
-2:
-                LONG_S  sp, GDB_FR_FRP(sp)
-
-/*
- * CP0 registers (R4000/R4400 unused registers skipped)
- */
-
-                mfc0    v0, CP0_INDEX
-                LONG_S  v0, GDB_FR_CP0_INDEX(sp)
-                mfc0    v0, CP0_RANDOM
-                LONG_S  v0, GDB_FR_CP0_RANDOM(sp)
-                DMFC0   v0, CP0_ENTRYLO0
-                LONG_S  v0, GDB_FR_CP0_ENTRYLO0(sp)
-                DMFC0   v0, CP0_ENTRYLO1
-                LONG_S  v0, GDB_FR_CP0_ENTRYLO1(sp)
-                DMFC0   v0, CP0_CONTEXT
-                LONG_S  v0, GDB_FR_CP0_CONTEXT(sp)
-                mfc0    v0, CP0_PAGEMASK
-                LONG_S  v0, GDB_FR_CP0_PAGEMASK(sp)
-                mfc0    v0, CP0_WIRED
-                LONG_S  v0, GDB_FR_CP0_WIRED(sp)
-                DMFC0   v0, CP0_ENTRYHI
-                LONG_S  v0, GDB_FR_CP0_ENTRYHI(sp)
-                mfc0    v0, CP0_PRID
-                LONG_S  v0, GDB_FR_CP0_PRID(sp)
-
-                .set    at
-
-/*
- * Continue with the higher level handler
- */
-
-                move    a0,sp
-
-                jal     handle_exception
-                 nop
-
-/*
- * Restore all writable registers, in reverse order
- */
-
-                .set    noat
-
-                LONG_L  v0, GDB_FR_CP0_ENTRYHI(sp)
-                LONG_L  v1, GDB_FR_CP0_WIRED(sp)
-                DMTC0   v0, CP0_ENTRYHI
-                mtc0    v1, CP0_WIRED
-                LONG_L  v0, GDB_FR_CP0_PAGEMASK(sp)
-                LONG_L  v1, GDB_FR_CP0_ENTRYLO1(sp)
-                mtc0    v0, CP0_PAGEMASK
-                DMTC0   v1, CP0_ENTRYLO1
-                LONG_L  v0, GDB_FR_CP0_ENTRYLO0(sp)
-                LONG_L  v1, GDB_FR_CP0_INDEX(sp)
-                DMTC0   v0, CP0_ENTRYLO0
-                LONG_L  v0, GDB_FR_CP0_CONTEXT(sp)
-                mtc0    v1, CP0_INDEX
-                DMTC0   v0, CP0_CONTEXT
-
-
-/*
- * Next, the floating point registers
- */
-                mfc0    v0, CP0_STATUS          /* check if the FPU is enabled */
-                srl     v0, v0, 16
-                andi    v0, v0, (ST0_CU1 >> 16)
-
-                beqz    v0, 3f                  /* disabled, skip */
-                 nop
-
-                LDC1    $31, GDB_FR_FPR31(sp)
-                LDC1    $30, GDB_FR_FPR30(sp)
-                LDC1    $29, GDB_FR_FPR29(sp)
-                LDC1    $28, GDB_FR_FPR28(sp)
-                LDC1    $27, GDB_FR_FPR27(sp)
-                LDC1    $26, GDB_FR_FPR26(sp)
-                LDC1    $25, GDB_FR_FPR25(sp)
-                LDC1    $24, GDB_FR_FPR24(sp)
-                LDC1    $23, GDB_FR_FPR23(sp)
-                LDC1    $22, GDB_FR_FPR22(sp)
-                LDC1    $21, GDB_FR_FPR21(sp)
-                LDC1    $20, GDB_FR_FPR20(sp)
-                LDC1    $19, GDB_FR_FPR19(sp)
-                LDC1    $18, GDB_FR_FPR18(sp)
-                LDC1    $17, GDB_FR_FPR17(sp)
-                LDC1    $16, GDB_FR_FPR16(sp)
-                LDC1    $15, GDB_FR_FPR15(sp)
-                LDC1    $14, GDB_FR_FPR14(sp)
-                LDC1    $13, GDB_FR_FPR13(sp)
-                LDC1    $12, GDB_FR_FPR12(sp)
-                LDC1    $11, GDB_FR_FPR11(sp)
-                LDC1    $10, GDB_FR_FPR10(sp)
-                LDC1    $9, GDB_FR_FPR9(sp)
-                LDC1    $8, GDB_FR_FPR8(sp)
-                LDC1    $7, GDB_FR_FPR7(sp)
-                LDC1    $6, GDB_FR_FPR6(sp)
-                LDC1    $5, GDB_FR_FPR5(sp)
-                LDC1    $4, GDB_FR_FPR4(sp)
-                LDC1    $3, GDB_FR_FPR3(sp)
-                LDC1    $2, GDB_FR_FPR2(sp)
-                LDC1    $1, GDB_FR_FPR1(sp)
-                LDC1    $0, GDB_FR_FPR0(sp)
-
-/*
- * Now the CP0 and integer registers
- */
-
-3:
-#ifdef CONFIG_MIPS_MT_SMTC
-                /* Read-modify write of Status must be atomic */
-                mfc0    t2, CP0_TCSTATUS
-                ori     t1, t2, TCSTATUS_IXMT
-                mtc0    t1, CP0_TCSTATUS
-                andi    t2, t2, TCSTATUS_IXMT
-                _ehb
-                DMT     9                               # dmt   t1
-                jal     mips_ihb
-                nop
-#endif /* CONFIG_MIPS_MT_SMTC */
-                mfc0    t0, CP0_STATUS
-                ori     t0, 0x1f
-                xori    t0, 0x1f
-                mtc0    t0, CP0_STATUS
-#ifdef CONFIG_MIPS_MT_SMTC
-                andi    t1, t1, VPECONTROL_TE
-                beqz    t1, 9f
-                nop
-                EMT                                     # emt
-9:
-                mfc0    t1, CP0_TCSTATUS
-                xori    t1, t1, TCSTATUS_IXMT
-                or      t1, t1, t2
-                mtc0    t1, CP0_TCSTATUS
-                _ehb
-#endif /* CONFIG_MIPS_MT_SMTC */
-                LONG_L  v0, GDB_FR_STATUS(sp)
-                LONG_L  v1, GDB_FR_EPC(sp)
-                mtc0    v0, CP0_STATUS
-                DMTC0   v1, CP0_EPC
-                LONG_L  v0, GDB_FR_HI(sp)
-                LONG_L  v1, GDB_FR_LO(sp)
-                mthi    v0
-                mtlo    v1
-                LONG_L  $31, GDB_FR_REG31(sp)
-                LONG_L  $30, GDB_FR_REG30(sp)
-                LONG_L  $28, GDB_FR_REG28(sp)
-                LONG_L  $27, GDB_FR_REG27(sp)
-                LONG_L  $26, GDB_FR_REG26(sp)
-                LONG_L  $25, GDB_FR_REG25(sp)
-                LONG_L  $24, GDB_FR_REG24(sp)
-                LONG_L  $23, GDB_FR_REG23(sp)
-                LONG_L  $22, GDB_FR_REG22(sp)
-                LONG_L  $21, GDB_FR_REG21(sp)
-                LONG_L  $20, GDB_FR_REG20(sp)
-                LONG_L  $19, GDB_FR_REG19(sp)
-                LONG_L  $18, GDB_FR_REG18(sp)
-                LONG_L  $17, GDB_FR_REG17(sp)
-                LONG_L  $16, GDB_FR_REG16(sp)
-                LONG_L  $15, GDB_FR_REG15(sp)
-                LONG_L  $14, GDB_FR_REG14(sp)
-                LONG_L  $13, GDB_FR_REG13(sp)
-                LONG_L  $12, GDB_FR_REG12(sp)
-                LONG_L  $11, GDB_FR_REG11(sp)
-                LONG_L  $10, GDB_FR_REG10(sp)
-                LONG_L  $9, GDB_FR_REG9(sp)
-                LONG_L  $8, GDB_FR_REG8(sp)
-                LONG_L  $7, GDB_FR_REG7(sp)
-                LONG_L  $6, GDB_FR_REG6(sp)
-                LONG_L  $5, GDB_FR_REG5(sp)
-                LONG_L  $4, GDB_FR_REG4(sp)
-                LONG_L  $3, GDB_FR_REG3(sp)
-                LONG_L  $2, GDB_FR_REG2(sp)
-                LONG_L  $1, GDB_FR_REG1(sp)
-#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
-                LONG_L  k0, GDB_FR_EPC(sp)
-                LONG_L  $29, GDB_FR_REG29(sp)           /* Deallocate stack */
-                jr      k0
-                rfe
-#else
-                LONG_L  sp, GDB_FR_REG29(sp)            /* Deallocate stack */
-
-                .set    mips3
-                eret
-                .set    mips0
-#endif
-                .set    at
-                .set    reorder
-                END(trap_low)
-
-LEAF(kgdb_read_byte)
-4:              lb      t0, (a0)
-                sb      t0, (a1)
-                li      v0, 0
-                jr      ra
-                .section __ex_table,"a"
-                PTR     4b, kgdbfault
-                .previous
-                END(kgdb_read_byte)
-
-LEAF(kgdb_write_byte)
-5:              sb      a0, (a1)
-                li      v0, 0
-                jr      ra
-                .section __ex_table,"a"
-                PTR     5b, kgdbfault
-                .previous
-                END(kgdb_write_byte)
-
-                .type   kgdbfault@function
-                .ent    kgdbfault
-
-kgdbfault:      li      v0, -EFAULT
-                jr      ra
-                .end    kgdbfault
diff --git a/arch/mips/kernel/gdb-stub.c b/arch/mips/kernel/gdb-stub.c
deleted file mode 100644
index 25f4eab8ea9c..000000000000
--- a/arch/mips/kernel/gdb-stub.c
+++ /dev/null
@@ -1,1155 +0,0 @@
-/*
- *  arch/mips/kernel/gdb-stub.c
- *
- *  Originally written by Glenn Engel, Lake Stevens Instrument Division
- *
- *  Contributed by HP Systems
- *
- *  Modified for SPARC by Stu Grossman, Cygnus Support.
- *
- *  Modified for Linux/MIPS (and MIPS in general) by Andreas Busse
- *  Send complaints, suggestions etc. to <andy@waldorf-gmbh.de>
- *
- *  Copyright (C) 1995 Andreas Busse
- *
- *  Copyright (C) 2003 MontaVista Software Inc.
- *  Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- */
-
-/*
- *  To enable debugger support, two things need to happen.  One, a
- *  call to set_debug_traps() is necessary in order to allow any breakpoints
- *  or error conditions to be properly intercepted and reported to gdb.
- *  Two, a breakpoint needs to be generated to begin communication.  This
- *  is most easily accomplished by a call to breakpoint().  Breakpoint()
- *  simulates a breakpoint by executing a BREAK instruction.
- *
- *
- *    The following gdb commands are supported:
- *
- * command          function                               Return value
- *
- *    g             return the value of the CPU registers  hex data or ENN
- *    G             set the value of the CPU registers     OK or ENN
- *
- *    mAA..AA,LLLL  Read LLLL bytes at address AA..AA      hex data or ENN
- *    MAA..AA,LLLL: Write LLLL bytes at address AA.AA      OK or ENN
- *
- *    c             Resume at current address              SNN   ( signal NN)
- *    cAA..AA       Continue at address AA..AA             SNN
- *
- *    s             Step one instruction                   SNN
- *    sAA..AA       Step one instruction from AA..AA       SNN
- *
- *    k             kill
- *
- *    ?             What was the last sigval ?             SNN   (signal NN)
- *
- *    bBB..BB       Set baud rate to BB..BB                OK or BNN, then sets
- *                                                         baud rate
- *
- * All commands and responses are sent with a packet which includes a
- * checksum.  A packet consists of
- *
- * $<packet info>#<checksum>.
- *
- * where
- * <packet info> :: <characters representing the command or response>
- * <checksum>    :: < two hex digits computed as modulo 256 sum of <packetinfo>>
- *
- * When a packet is received, it is first acknowledged with either '+' or '-'.
- * '+' indicates a successful transfer.  '-' indicates a failed transfer.
- *
- * Example:
- *
- * Host:                  Reply:
- * $m0,10#2a               +$00010203040506070809101112131415#42
- *
- *
- *  ==============
- *  MORE EXAMPLES:
- *  ==============
- *
- *  For reference -- the following are the steps that one
- *  company took (RidgeRun Inc) to get remote gdb debugging
- *  going. In this scenario the host machine was a PC and the
- *  target platform was a Galileo EVB64120A MIPS evaluation
- *  board.
- *
- *  Step 1:
- *  First download gdb-5.0.tar.gz from the internet.
- *  and then build/install the package.
- *
- *  Example:
- *    $ tar zxf gdb-5.0.tar.gz
- *    $ cd gdb-5.0
- *    $ ./configure --target=mips-linux-elf
- *    $ make
- *    $ install
- *    $ which mips-linux-elf-gdb
- *    /usr/local/bin/mips-linux-elf-gdb
- *
- *  Step 2:
- *  Configure linux for remote debugging and build it.
- *
- *  Example:
- *    $ cd ~/linux
- *    $ make menuconfig <go to "Kernel Hacking" and turn on remote debugging>
- *    $ make
- *
- *  Step 3:
- *  Download the kernel to the remote target and start
- *  the kernel running. It will promptly halt and wait
- *  for the host gdb session to connect. It does this
- *  since the "Kernel Hacking" option has defined
- *  CONFIG_KGDB which in turn enables your calls
- *  to:
- *     set_debug_traps();
- *     breakpoint();
- *
- *  Step 4:
- *  Start the gdb session on the host.
- *
- *  Example:
- *    $ mips-linux-elf-gdb vmlinux
- *    (gdb) set remotebaud 115200
- *    (gdb) target remote /dev/ttyS1
- *    ...at this point you are connected to
- *       the remote target and can use gdb
- *       in the normal fasion. Setting
- *       breakpoints, single stepping,
- *       printing variables, etc.
- */
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/console.h>
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/spinlock.h>
-#include <linux/slab.h>
-#include <linux/reboot.h>
-
-#include <asm/asm.h>
-#include <asm/cacheflush.h>
-#include <asm/mipsregs.h>
-#include <asm/pgtable.h>
-#include <asm/system.h>
-#include <asm/gdb-stub.h>
-#include <asm/inst.h>
-
-/*
- * external low-level support routines
- */
-
-extern int putDebugChar(char c);    /* write a single character      */
-extern char getDebugChar(void);     /* read and return a single char */
-extern void trap_low(void);
-
-/*
- * breakpoint and test functions
- */
-extern void breakpoint(void);
-extern void breakinst(void);
-extern void async_breakpoint(void);
-extern void async_breakinst(void);
-extern void adel(void);
-
-/*
- * local prototypes
- */
-
-static void getpacket(char *buffer);
-static void putpacket(char *buffer);
-static int computeSignal(int tt);
-static int hex(unsigned char ch);
-static int hexToInt(char **ptr, int *intValue);
-static int hexToLong(char **ptr, long *longValue);
-static unsigned char *mem2hex(char *mem, char *buf, int count, int may_fault);
-void handle_exception(struct gdb_regs *regs);
-
-int kgdb_enabled;
-
-/*
- * spin locks for smp case
- */
-static DEFINE_SPINLOCK(kgdb_lock);
-static raw_spinlock_t kgdb_cpulock[NR_CPUS] = {
-        [0 ... NR_CPUS-1] = __RAW_SPIN_LOCK_UNLOCKED,
-};
-
-/*
- * BUFMAX defines the maximum number of characters in inbound/outbound buffers
- * at least NUMREGBYTES*2 are needed for register packets
- */
-#define BUFMAX 2048
-
-static char input_buffer[BUFMAX];
-static char output_buffer[BUFMAX];
-static int initialized; /* !0 means we've been initialized */
-static int kgdb_started;
-static const char hexchars[]="0123456789abcdef";
-
-/* Used to prevent crashes in memory access.  Note that they'll crash anyway if
-   we haven't set up fault handlers yet... */
-int kgdb_read_byte(unsigned char *address, unsigned char *dest);
-int kgdb_write_byte(unsigned char val, unsigned char *dest);
-
-/*
- * Convert ch from a hex digit to an int
- */
-static int hex(unsigned char ch)
-{
-        if (ch >= 'a' && ch <= 'f')
-                return ch-'a'+10;
-        if (ch >= '0' && ch <= '9')
-                return ch-'0';
-        if (ch >= 'A' && ch <= 'F')
-                return ch-'A'+10;
-        return -1;
-}
-
-/*
- * scan for the sequence $<data>#<checksum>
- */
-static void getpacket(char *buffer)
-{
-        unsigned char checksum;
-        unsigned char xmitcsum;
-        int i;
-        int count;
-        unsigned char ch;
-
-        do {
-                /*
-                 * wait around for the start character,
-                 * ignore all other characters
-                 */
-                while ((ch = (getDebugChar() & 0x7f)) != '$') ;
-
-                checksum = 0;
-                xmitcsum = -1;
-                count = 0;
-
-                /*
-                 * now, read until a # or end of buffer is found
-                 */
-                while (count < BUFMAX) {
-                        ch = getDebugChar();
-                        if (ch == '#')
-                                break;
-                        checksum = checksum + ch;
-                        buffer[count] = ch;
-                        count = count + 1;
-                }
-
-                if (count >= BUFMAX)
-                        continue;
-
-                buffer[count] = 0;
-
-                if (ch == '#') {
-                        xmitcsum = hex(getDebugChar() & 0x7f) << 4;
-                        xmitcsum |= hex(getDebugChar() & 0x7f);
-
-                        if (checksum != xmitcsum)
-                                putDebugChar('-');      /* failed checksum */
-                        else {
-                                putDebugChar('+'); /* successful transfer */
-
-                                /*
-                                 * if a sequence char is present,
-                                 * reply the sequence ID
-                                 */
-                                if (buffer[2] == ':') {
-                                        putDebugChar(buffer[0]);
-                                        putDebugChar(buffer[1]);
-
-                                        /*
-                                         * remove sequence chars from buffer
-                                         */
-                                        count = strlen(buffer);
-                                        for (i=3; i <= count; i++)
-                                                buffer[i-3] = buffer[i];
-                                }
-                        }
-                }
-        }
-        while (checksum != xmitcsum);
-}
-
-/*
- * send the packet in buffer.
- */
-static void putpacket(char *buffer)
-{
-        unsigned char checksum;
-        int count;
-        unsigned char ch;
-
-        /*
-         * $<packet info>#<checksum>.
-         */
-
-        do {
-                putDebugChar('$');
-                checksum = 0;
-                count = 0;
-
-                while ((ch = buffer[count]) != 0) {
-                        if (!(putDebugChar(ch)))
-                                return;
-                        checksum += ch;
-                        count += 1;
-                }
-
-                putDebugChar('#');
-                putDebugChar(hexchars[checksum >> 4]);
-                putDebugChar(hexchars[checksum & 0xf]);
-
-        }
-        while ((getDebugChar() & 0x7f) != '+');
-}
-
-
-/*
- * Convert the memory pointed to by mem into hex, placing result in buf.
- * Return a pointer to the last char put in buf (null), in case of mem fault,
- * return 0.
- * may_fault is non-zero if we are reading from arbitrary memory, but is currently
- * not used.
- */
-static unsigned char *mem2hex(char *mem, char *buf, int count, int may_fault)
-{
-        unsigned char ch;
-
-        while (count-- > 0) {
-                if (kgdb_read_byte(mem++, &ch) != 0)
-                        return 0;
-                *buf++ = hexchars[ch >> 4];
-                *buf++ = hexchars[ch & 0xf];
-        }
-
-        *buf = 0;
-
-        return buf;
-}
-
-/*
- * convert the hex array pointed to by buf into binary to be placed in mem
- * return a pointer to the character AFTER the last byte written
- * may_fault is non-zero if we are reading from arbitrary memory, but is currently
- * not used.
- */
-static char *hex2mem(char *buf, char *mem, int count, int binary, int may_fault)
-{
-        int i;
-        unsigned char ch;
-
-        for (i=0; i<count; i++)
-        {
-                if (binary) {
-                        ch = *buf++;
-                        if (ch == 0x7d)
-                                ch = 0x20 ^ *buf++;
-                }
-                else {
-                        ch = hex(*buf++) << 4;
-                        ch |= hex(*buf++);
-                }
-                if (kgdb_write_byte(ch, mem++) != 0)
-                        return 0;
-        }
-
-        return mem;
-}
-
-/*
- * This table contains the mapping between SPARC hardware trap types, and
- * signals, which are primarily what GDB understands.  It also indicates
- * which hardware traps we need to commandeer when initializing the stub.
- */
-static struct hard_trap_info {
-        unsigned char tt;               /* Trap type code for MIPS R3xxx and R4xxx */
-        unsigned char signo;            /* Signal that we map this trap into */
-} hard_trap_info[] = {
-        { 6, SIGBUS },                  /* instruction bus error */
-        { 7, SIGBUS },                  /* data bus error */
-        { 9, SIGTRAP },                 /* break */
-        { 10, SIGILL },                 /* reserved instruction */
-/*      { 11, SIGILL },         */      /* CPU unusable */
-        { 12, SIGFPE },                 /* overflow */
-        { 13, SIGTRAP },                /* trap */
-        { 14, SIGSEGV },                /* virtual instruction cache coherency */
-        { 15, SIGFPE },                 /* floating point exception */
-        { 23, SIGSEGV },                /* watch */
-        { 31, SIGSEGV },                /* virtual data cache coherency */
-        { 0, 0}                         /* Must be last */
-};
-
-/* Save the normal trap handlers for user-mode traps. */
-void *saved_vectors[32];
-
-/*
- * Set up exception handlers for tracing and breakpoints
- */
-void set_debug_traps(void)
-{
-        struct hard_trap_info *ht;
-        unsigned long flags;
-        unsigned char c;
-
-        local_irq_save(flags);
-        for (ht = hard_trap_info; ht->tt && ht->signo; ht++)
-                saved_vectors[ht->tt] = set_except_vector(ht->tt, trap_low);
-
-        putDebugChar('+'); /* 'hello world' */
-        /*
-         * In case GDB is started before us, ack any packets
-         * (presumably "$?#xx") sitting there.
-         */
-        while((c = getDebugChar()) != '$');
-        while((c = getDebugChar()) != '#');
-        c = getDebugChar(); /* eat first csum byte */
-        c = getDebugChar(); /* eat second csum byte */
-        putDebugChar('+'); /* ack it */
-
-        initialized = 1;
-        local_irq_restore(flags);
-}
-
-void restore_debug_traps(void)
-{
-        struct hard_trap_info *ht;
-        unsigned long flags;
-
-        local_irq_save(flags);
-        for (ht = hard_trap_info; ht->tt && ht->signo; ht++)
-                set_except_vector(ht->tt, saved_vectors[ht->tt]);
-        local_irq_restore(flags);
-}
-
-/*
- * Convert the MIPS hardware trap type code to a Unix signal number.
- */
-static int computeSignal(int tt)
-{
-        struct hard_trap_info *ht;
-
-        for (ht = hard_trap_info; ht->tt && ht->signo; ht++)
-                if (ht->tt == tt)
-                        return ht->signo;
-
-        return SIGHUP;          /* default for things we don't know about */
-}
-
-/*
- * While we find nice hex chars, build an int.
- * Return number of chars processed.
- */
-static int hexToInt(char **ptr, int *intValue)
-{
-        int numChars = 0;
-        int hexValue;
-
-        *intValue = 0;
-
-        while (**ptr) {
-                hexValue = hex(**ptr);
-                if (hexValue < 0)
-                        break;
-
-                *intValue = (*intValue << 4) | hexValue;
-                numChars ++;
-
-                (*ptr)++;
-        }
-
-        return (numChars);
-}
-
-static int hexToLong(char **ptr, long *longValue)
-{
-        int numChars = 0;
-        int hexValue;
-
-        *longValue = 0;
-
-        while (**ptr) {
-                hexValue = hex(**ptr);
-                if (hexValue < 0)
-                        break;
-
-                *longValue = (*longValue << 4) | hexValue;
-                numChars ++;
-
-                (*ptr)++;
-        }
-
-        return numChars;
-}
-
-
-#if 0
-/*
- * Print registers (on target console)
- * Used only to debug the stub...
- */
-void show_gdbregs(struct gdb_regs * regs)
-{
-        /*
-         * Saved main processor registers
-         */
-        printk("$0 : %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n",
-               regs->reg0, regs->reg1, regs->reg2, regs->reg3,
-               regs->reg4, regs->reg5, regs->reg6, regs->reg7);
-        printk("$8 : %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n",
-               regs->reg8, regs->reg9, regs->reg10, regs->reg11,
-               regs->reg12, regs->reg13, regs->reg14, regs->reg15);
-        printk("$16: %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n",
-               regs->reg16, regs->reg17, regs->reg18, regs->reg19,
-               regs->reg20, regs->reg21, regs->reg22, regs->reg23);
-        printk("$24: %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n",
-               regs->reg24, regs->reg25, regs->reg26, regs->reg27,
-               regs->reg28, regs->reg29, regs->reg30, regs->reg31);
-
-        /*
-         * Saved cp0 registers
-         */
-        printk("epc  : %08lx\nStatus: %08lx\nCause : %08lx\n",
-               regs->cp0_epc, regs->cp0_status, regs->cp0_cause);
-}
-#endif /* dead code */
-
-/*
- * We single-step by setting breakpoints. When an exception
- * is handled, we need to restore the instructions hoisted
- * when the breakpoints were set.
- *
- * This is where we save the original instructions.
- */
-static struct gdb_bp_save {
-        unsigned long addr;
-        unsigned int val;
-} step_bp[2];
-
-#define BP 0x0000000d  /* break opcode */
-
-/*
- * Set breakpoint instructions for single stepping.
- */
-static void single_step(struct gdb_regs *regs)
-{
-        union mips_instruction insn;
-        unsigned long targ;
-        int is_branch, is_cond, i;
-
-        targ = regs->cp0_epc;
-        insn.word = *(unsigned int *)targ;
-        is_branch = is_cond = 0;
-
-        switch (insn.i_format.opcode) {
-        /*
-         * jr and jalr are in r_format format.
-         */
-        case spec_op:
-                switch (insn.r_format.func) {
-                case jalr_op:
-                case jr_op:
-                        targ = *(&regs->reg0 + insn.r_format.rs);
-                        is_branch = 1;
-                        break;
-                }
-                break;
-
-        /*
-         * This group contains:
-         * bltz_op, bgez_op, bltzl_op, bgezl_op,
-         * bltzal_op, bgezal_op, bltzall_op, bgezall_op.
-         */
-        case bcond_op:
-                is_branch = is_cond = 1;
-                targ += 4 + (insn.i_format.simmediate << 2);
-                break;
-
-        /*
-         * These are unconditional and in j_format.
-         */
-        case jal_op:
-        case j_op:
-                is_branch = 1;
-                targ += 4;
-                targ >>= 28;
-                targ <<= 28;
-                targ |= (insn.j_format.target << 2);
-                break;
-
-        /*
-         * These are conditional.
-         */
-        case beq_op:
-        case beql_op:
-        case bne_op:
-        case bnel_op:
-        case blez_op:
-        case blezl_op:
-        case bgtz_op:
-        case bgtzl_op:
-        case cop0_op:
-        case cop1_op:
-        case cop2_op:
-        case cop1x_op:
-                is_branch = is_cond = 1;
-                targ += 4 + (insn.i_format.simmediate << 2);
-                break;
-        }
-
-        if (is_branch) {
-                i = 0;
-                if (is_cond && targ != (regs->cp0_epc + 8)) {
-                        step_bp[i].addr = regs->cp0_epc + 8;
-                        step_bp[i++].val = *(unsigned *)(regs->cp0_epc + 8);
-                        *(unsigned *)(regs->cp0_epc + 8) = BP;
-                }
-                step_bp[i].addr = targ;
-                step_bp[i].val  = *(unsigned *)targ;
-                *(unsigned *)targ = BP;
-        } else {
-                step_bp[0].addr = regs->cp0_epc + 4;
-                step_bp[0].val  = *(unsigned *)(regs->cp0_epc + 4);
-                *(unsigned *)(regs->cp0_epc + 4) = BP;
-        }
-}
-
-/*
- *  If asynchronously interrupted by gdb, then we need to set a breakpoint
- *  at the interrupted instruction so that we wind up stopped with a
- *  reasonable stack frame.
- */
-static struct gdb_bp_save async_bp;
-
-/*
- * Swap the interrupted EPC with our asynchronous breakpoint routine.
- * This is safer than stuffing the breakpoint in-place, since no cache
- * flushes (or resulting smp_call_functions) are required.  The
- * assumption is that only one CPU will be handling asynchronous bp's,
- * and only one can be active at a time.
- */
-extern spinlock_t smp_call_lock;
-
-void set_async_breakpoint(unsigned long *epc)
-{
-        /* skip breaking into userland */
-        if ((*epc & 0x80000000) == 0)
-                return;
-
-#ifdef CONFIG_SMP
-        /* avoid deadlock if someone is make IPC */
-        if (spin_is_locked(&smp_call_lock))
-                return;
-#endif
-
-        async_bp.addr = *epc;
-        *epc = (unsigned long)async_breakpoint;
-}
-
-#ifdef CONFIG_SMP
-static void kgdb_wait(void *arg)
-{
-        unsigned flags;
-        int cpu = smp_processor_id();
-
-        local_irq_save(flags);
-
-        __raw_spin_lock(&kgdb_cpulock[cpu]);
-        __raw_spin_unlock(&kgdb_cpulock[cpu]);
-
-        local_irq_restore(flags);
-}
-#endif
-
-/*
- * GDB stub needs to call kgdb_wait on all processor with interrupts
- * disabled, so it uses it's own special variant.
- */
-static int kgdb_smp_call_kgdb_wait(void)
-{
-#ifdef CONFIG_SMP
-        cpumask_t mask = cpu_online_map;
-        struct call_data_struct data;
-        int cpu = smp_processor_id();
-        int cpus;
-
-        /*
-         * Can die spectacularly if this CPU isn't yet marked online
-         */
-        BUG_ON(!cpu_online(cpu));
-
-        cpu_clear(cpu, mask);
-        cpus = cpus_weight(mask);
-        if (!cpus)
-                return 0;
-
-        if (spin_is_locked(&smp_call_lock)) {
-                /*
-                 * Some other processor is trying to make us do something
-                 * but we're not going to respond... give up
-                 */
-                return -1;
-                }
-
-        /*
-         * We will continue here, accepting the fact that
-         * the kernel may deadlock if another CPU attempts
-         * to call smp_call_function now...
-         */
-
-        data.func = kgdb_wait;
-        data.info = NULL;
-        atomic_set(&data.started, 0);
-        data.wait = 0;
-
-        spin_lock(&smp_call_lock);
-        call_data = &data;
-        mb();
-
-        core_send_ipi_mask(mask, SMP_CALL_FUNCTION);
-
-        /* Wait for response */
-        /* FIXME: lock-up detection, backtrace on lock-up */
-        while (atomic_read(&data.started) != cpus)
-                barrier();
-
-        call_data = NULL;
-        spin_unlock(&smp_call_lock);
-#endif
-
-        return 0;
-}
-
-/*
- * This function does all command processing for interfacing to gdb.  It
- * returns 1 if you should skip the instruction at the trap address, 0
- * otherwise.
- */
-void handle_exception(struct gdb_regs *regs)
-{
-        int trap;                       /* Trap type */
-        int sigval;
-        long addr;
-        int length;
-        char *ptr;
-        unsigned long *stack;
-        int i;
-        int bflag = 0;
-
-        kgdb_started = 1;
-
-        /*
-         * acquire the big kgdb spinlock
-         */
-        if (!spin_trylock(&kgdb_lock)) {
-                /*
-                 * some other CPU has the lock, we should go back to
-                 * receive the gdb_wait IPC
-                 */
-                return;
-        }
-
-        /*
-         * If we're in async_breakpoint(), restore the real EPC from
-         * the breakpoint.
-         */
-        if (regs->cp0_epc == (unsigned long)async_breakinst) {
-                regs->cp0_epc = async_bp.addr;
-                async_bp.addr = 0;
-        }
-
-        /*
-         * acquire the CPU spinlocks
-         */
-        for_each_online_cpu(i)
-                if (__raw_spin_trylock(&kgdb_cpulock[i]) == 0)
-                        panic("kgdb: couldn't get cpulock %d\n", i);
-
-        /*
-         * force other cpus to enter kgdb
-         */
-        kgdb_smp_call_kgdb_wait();
-
-        /*
-         * If we're in breakpoint() increment the PC
-         */
-        trap = (regs->cp0_cause & 0x7c) >> 2;
-        if (trap == 9 && regs->cp0_epc == (unsigned long)breakinst)
-                regs->cp0_epc += 4;
-
-        /*
-         * If we were single_stepping, restore the opcodes hoisted
-         * for the breakpoint[s].
-         */
-        if (step_bp[0].addr) {
-                *(unsigned *)step_bp[0].addr = step_bp[0].val;
-                step_bp[0].addr = 0;
-
-                if (step_bp[1].addr) {
-                        *(unsigned *)step_bp[1].addr = step_bp[1].val;
-                        step_bp[1].addr = 0;
-                }
-        }
-
-        stack = (long *)regs->reg29;                    /* stack ptr */
-        sigval = computeSignal(trap);
-
-        /*
-         * reply to host that an exception has occurred
-         */
-        ptr = output_buffer;
-
-        /*
-         * Send trap type (converted to signal)
-         */
-        *ptr++ = 'T';
-        *ptr++ = hexchars[sigval >> 4];
-        *ptr++ = hexchars[sigval & 0xf];
-
-        /*
-         * Send Error PC
-         */
-        *ptr++ = hexchars[REG_EPC >> 4];
-        *ptr++ = hexchars[REG_EPC & 0xf];
-        *ptr++ = ':';
-        ptr = mem2hex((char *)&regs->cp0_epc, ptr, sizeof(long), 0);
-        *ptr++ = ';';
-
-        /*
-         * Send frame pointer
-         */
-        *ptr++ = hexchars[REG_FP >> 4];
-        *ptr++ = hexchars[REG_FP & 0xf];
-        *ptr++ = ':';
-        ptr = mem2hex((char *)&regs->reg30, ptr, sizeof(long), 0);
-        *ptr++ = ';';
-
-        /*
-         * Send stack pointer
-         */
-        *ptr++ = hexchars[REG_SP >> 4];
-        *ptr++ = hexchars[REG_SP & 0xf];
-        *ptr++ = ':';
-        ptr = mem2hex((char *)&regs->reg29, ptr, sizeof(long), 0);
-        *ptr++ = ';';
-
-        *ptr++ = 0;
-        putpacket(output_buffer);       /* send it off... */
-
-        /*
-         * Wait for input from remote GDB
-         */
-        while (1) {
-                output_buffer[0] = 0;
-                getpacket(input_buffer);
-
-                switch (input_buffer[0])
-                {
-                case '?':
-                        output_buffer[0] = 'S';
-                        output_buffer[1] = hexchars[sigval >> 4];
-                        output_buffer[2] = hexchars[sigval & 0xf];
-                        output_buffer[3] = 0;
-                        break;
-
-                /*
-                 * Detach debugger; let CPU run
-                 */
-                case 'D':
-                        putpacket(output_buffer);
-                        goto finish_kgdb;
-                        break;
-
-                case 'd':
-                        /* toggle debug flag */
-                        break;
-
-                /*
-                 * Return the value of the CPU registers
-                 */
-                case 'g':
-                        ptr = output_buffer;
-                        ptr = mem2hex((char *)&regs->reg0, ptr, 32*sizeof(long), 0); /* r0...r31 */
-                        ptr = mem2hex((char *)&regs->cp0_status, ptr, 6*sizeof(long), 0); /* cp0 */
-                        ptr = mem2hex((char *)&regs->fpr0, ptr, 32*sizeof(long), 0); /* f0...31 */
-                        ptr = mem2hex((char *)&regs->cp1_fsr, ptr, 2*sizeof(long), 0); /* cp1 */
-                        ptr = mem2hex((char *)&regs->frame_ptr, ptr, 2*sizeof(long), 0); /* frp */
-                        ptr = mem2hex((char *)&regs->cp0_index, ptr, 16*sizeof(long), 0); /* cp0 */
-                        break;
-
-                /*
-                 * set the value of the CPU registers - return OK
-                 */
-                case 'G':
-                {
-                        ptr = &input_buffer[1];
-                        hex2mem(ptr, (char *)&regs->reg0, 32*sizeof(long), 0, 0);
-                        ptr += 32*(2*sizeof(long));
-                        hex2mem(ptr, (char *)&regs->cp0_status, 6*sizeof(long), 0, 0);
-                        ptr += 6*(2*sizeof(long));
-                        hex2mem(ptr, (char *)&regs->fpr0, 32*sizeof(long), 0, 0);
-                        ptr += 32*(2*sizeof(long));
-                        hex2mem(ptr, (char *)&regs->cp1_fsr, 2*sizeof(long), 0, 0);
-                        ptr += 2*(2*sizeof(long));
-                        hex2mem(ptr, (char *)&regs->frame_ptr, 2*sizeof(long), 0, 0);
-                        ptr += 2*(2*sizeof(long));
-                        hex2mem(ptr, (char *)&regs->cp0_index, 16*sizeof(long), 0, 0);
-                        strcpy(output_buffer, "OK");
-                 }
-                break;
-
-                /*
-                 * mAA..AA,LLLL  Read LLLL bytes at address AA..AA
-                 */
-                case 'm':
-                        ptr = &input_buffer[1];
-
-                        if (hexToLong(&ptr, &addr)
-                                && *ptr++ == ','
-                                && hexToInt(&ptr, &length)) {
-                                if (mem2hex((char *)addr, output_buffer, length, 1))
-                                        break;
-                                strcpy(output_buffer, "E03");
-                        } else
-                                strcpy(output_buffer, "E01");
-                        break;
-
-                /*
-                 * XAA..AA,LLLL: Write LLLL escaped binary bytes at address AA.AA
-                 */
-                case 'X':
-                        bflag = 1;
-                        /* fall through */
-
-                /*
-                 * MAA..AA,LLLL: Write LLLL bytes at address AA.AA return OK
-                 */
-                case 'M':
-                        ptr = &input_buffer[1];
-
-                        if (hexToLong(&ptr, &addr)
-                                && *ptr++ == ','
-                                && hexToInt(&ptr, &length)
-                                && *ptr++ == ':') {
-                                if (hex2mem(ptr, (char *)addr, length, bflag, 1))
-                                        strcpy(output_buffer, "OK");
-                                else
-                                        strcpy(output_buffer, "E03");
-                        }
-                        else
-                                strcpy(output_buffer, "E02");
-                        break;
-
-                /*
-                 * cAA..AA    Continue at address AA..AA(optional)
-                 */
-                case 'c':
-                        /* try to read optional parameter, pc unchanged if no parm */
-
-                        ptr = &input_buffer[1];
-                        if (hexToLong(&ptr, &addr))
-                                regs->cp0_epc = addr;
-
-                        goto exit_kgdb_exception;
-                        break;
-
-                /*
-                 * kill the program; let us try to restart the machine
-                 * Reset the whole machine.
-                 */
-                case 'k':
-                case 'r':
-                        machine_restart("kgdb restarts machine");
-                        break;
-
-                /*
-                 * Step to next instruction
-                 */
-                case 's':
-                        /*
-                         * There is no single step insn in the MIPS ISA, so we
-                         * use breakpoints and continue, instead.
-                         */
-                        single_step(regs);
-                        goto exit_kgdb_exception;
-                        /* NOTREACHED */
-                        break;
-
-                /*
-                 * Set baud rate (bBB)
-                 * FIXME: Needs to be written
-                 */
-                case 'b':
-                {
-#if 0
-                        int baudrate;
-                        extern void set_timer_3();
-
-                        ptr = &input_buffer[1];
-                        if (!hexToInt(&ptr, &baudrate))
-                        {
-                                strcpy(output_buffer, "B01");
-                                break;
-                        }
-
-                        /* Convert baud rate to uart clock divider */
-
-                        switch (baudrate)
-                        {
-                                case 38400:
-                                        baudrate = 16;
-                                        break;
-                                case 19200:
-                                        baudrate = 33;
-                                        break;
-                                case 9600:
-                                        baudrate = 65;
-                                        break;
-                                default:
-                                        baudrate = 0;
-                                        strcpy(output_buffer, "B02");
-                                        goto x1;
-                        }
-
-                        if (baudrate) {
-                                putpacket("OK");        /* Ack before changing speed */
-                                set_timer_3(baudrate); /* Set it */
-                        }
-#endif
-                }
-                break;
-
-                }                       /* switch */
-
-                /*
-                 * reply to the request
-                 */
-
-                putpacket(output_buffer);
-
-        } /* while */
-
-        return;
-
-finish_kgdb:
-        restore_debug_traps();
-
-exit_kgdb_exception:
-        /* release locks so other CPUs can go */
-        for_each_online_cpu(i)
-                __raw_spin_unlock(&kgdb_cpulock[i]);
-        spin_unlock(&kgdb_lock);
-
-        __flush_cache_all();
-        return;
-}
-
-/*
- * This function will generate a breakpoint exception.  It is used at the
- * beginning of a program to sync up with a debugger and can be used
- * otherwise as a quick means to stop program execution and "break" into
- * the debugger.
- */
-void breakpoint(void)
-{
-        if (!initialized)
-                return;
-
-        __asm__ __volatile__(
-                        ".globl breakinst\n\t"
-                        ".set\tnoreorder\n\t"
-                        "nop\n"
-                        "breakinst:\tbreak\n\t"
-                        "nop\n\t"
-                        ".set\treorder"
-                        );
-}
-
-/* Nothing but the break; don't pollute any registers */
-void async_breakpoint(void)
-{
-        __asm__ __volatile__(
-                        ".globl async_breakinst\n\t"
-                        ".set\tnoreorder\n\t"
-                        "nop\n"
-                        "async_breakinst:\tbreak\n\t"
-                        "nop\n\t"
-                        ".set\treorder"
-                        );
-}
-
-void adel(void)
-{
-        __asm__ __volatile__(
-                        ".globl\tadel\n\t"
-                        "lui\t$8,0x8000\n\t"
-                        "lw\t$9,1($8)\n\t"
-                        );
-}
-
-/*
- * malloc is needed by gdb client in "call func()", even a private one
- * will make gdb happy
- */
-static void __used *malloc(size_t size)
-{
-        return kmalloc(size, GFP_ATOMIC);
-}
-
-static void __used free(void *where)
-{
-        kfree(where);
-}
-
-#ifdef CONFIG_GDB_CONSOLE
-
-void gdb_putsn(const char *str, int l)
-{
-        char outbuf[18];
-
-        if (!kgdb_started)
-                return;
-
-        outbuf[0]='O';
-
-        while(l) {
-                int i = (l>8)?8:l;
-                mem2hex((char *)str, &outbuf[1], i, 0);
-                outbuf[(i*2)+1]=0;
-                putpacket(outbuf);
-                str += i;
-                l -= i;
-        }
-}
-
-static void gdb_console_write(struct console *con, const char *s, unsigned n)
-{
-        gdb_putsn(s, n);
-}
-
-static struct console gdb_console = {
-        .name   = "gdb",
-        .write  = gdb_console_write,
-        .flags  = CON_PRINTBUFFER,
-        .index  = -1
-};
-
-static int __init register_gdb_console(void)
-{
-        register_console(&gdb_console);
-
-        return 0;
-}
-
-console_initcall(register_gdb_console);
-
-#endif
diff --git a/arch/mips/kernel/irq.c b/arch/mips/kernel/irq.c
index 6045b9a51a35..4b4007b3083a 100644
--- a/arch/mips/kernel/irq.c
+++ b/arch/mips/kernel/irq.c
@@ -21,11 +21,16 @@
 #include <linux/sched.h>
 #include <linux/seq_file.h>
 #include <linux/kallsyms.h>
+#include <linux/kgdb.h>
 
 #include <asm/atomic.h>
 #include <asm/system.h>
 #include <asm/uaccess.h>
 
+#ifdef CONFIG_KGDB
+int kgdb_early_setup;
+#endif
+
 static unsigned long irq_map[NR_IRQS / BITS_PER_LONG];
 
 int allocate_irqno(void)
@@ -126,33 +131,22 @@ asmlinkage void spurious_interrupt(void)
         atomic_inc(&irq_err_count);
 }
 
-#ifdef CONFIG_KGDB
-extern void breakpoint(void);
-extern void set_debug_traps(void);
-
-static int kgdb_flag = 1;
-static int __init nokgdb(char *str)
-{
-        kgdb_flag = 0;
-        return 1;
-}
-__setup("nokgdb", nokgdb);
-#endif
-
 void __init init_IRQ(void)
 {
         int i;
 
+#ifdef CONFIG_KGDB
+        if (kgdb_early_setup)
+                return;
+#endif
+
         for (i = 0; i < NR_IRQS; i++)
                 set_irq_noprobe(i);
 
         arch_init_irq();
 
 #ifdef CONFIG_KGDB
-        if (kgdb_flag) {
-                printk("Wait for gdb client connection ...\n");
-                set_debug_traps();
-                breakpoint();
-        }
+        if (!kgdb_early_setup)
+                kgdb_early_setup = 1;
 #endif
 }
diff --git a/arch/mips/kernel/kgdb.c b/arch/mips/kernel/kgdb.c
new file mode 100644
index 000000000000..c5a8b2d21ca4
--- /dev/null
+++ b/arch/mips/kernel/kgdb.c
@@ -0,0 +1,281 @@
+/*
+ *  Originally written by Glenn Engel, Lake Stevens Instrument Division
+ *
+ *  Contributed by HP Systems
+ *
+ *  Modified for Linux/MIPS (and MIPS in general) by Andreas Busse
+ *  Send complaints, suggestions etc. to <andy@waldorf-gmbh.de>
+ *
+ *  Copyright (C) 1995 Andreas Busse
+ *
+ *  Copyright (C) 2003 MontaVista Software Inc.
+ *  Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ *
+ *  Copyright (C) 2004-2005 MontaVista Software Inc.
+ *  Author: Manish Lachwani, mlachwani@mvista.com or manish@koffee-break.com
+ *
+ *  Copyright (C) 2007-2008 Wind River Systems, Inc.
+ *  Author/Maintainer: Jason Wessel, jason.wessel@windriver.com
+ *
+ *  This file is licensed under the terms of the GNU General Public License
+ *  version 2. This program is licensed "as is" without any warranty of any
+ *  kind, whether express or implied.
+ */
+
+#include <linux/ptrace.h>               /* for linux pt_regs struct */
+#include <linux/kgdb.h>
+#include <linux/kdebug.h>
+#include <linux/sched.h>
+#include <asm/inst.h>
+#include <asm/fpu.h>
+#include <asm/cacheflush.h>
+#include <asm/processor.h>
+#include <asm/sigcontext.h>
+
+static struct hard_trap_info {
+        unsigned char tt;       /* Trap type code for MIPS R3xxx and R4xxx */
+        unsigned char signo;    /* Signal that we map this trap into */
+} hard_trap_info[] = {
+        { 6, SIGBUS },          /* instruction bus error */
+        { 7, SIGBUS },          /* data bus error */
+        { 9, SIGTRAP },         /* break */
+/*      { 11, SIGILL }, */      /* CPU unusable */
+        { 12, SIGFPE },         /* overflow */
+        { 13, SIGTRAP },        /* trap */
+        { 14, SIGSEGV },        /* virtual instruction cache coherency */
+        { 15, SIGFPE },         /* floating point exception */
+        { 23, SIGSEGV },        /* watch */
+        { 31, SIGSEGV },        /* virtual data cache coherency */
+        { 0, 0}                 /* Must be last */
+};
+
+void arch_kgdb_breakpoint(void)
+{
+        __asm__ __volatile__(
+                ".globl breakinst\n\t"
+                ".set\tnoreorder\n\t"
+                "nop\n"
+                "breakinst:\tbreak\n\t"
+                "nop\n\t"
+                ".set\treorder");
+}
+
+static void kgdb_call_nmi_hook(void *ignored)
+{
+        kgdb_nmicallback(raw_smp_processor_id(), (void *)0);
+}
+
+void kgdb_roundup_cpus(unsigned long flags)
+{
+        local_irq_enable();
+        smp_call_function(kgdb_call_nmi_hook, NULL, NULL);
+        local_irq_disable();
+}
+
+static int compute_signal(int tt)
+{
+        struct hard_trap_info *ht;
+
+        for (ht = hard_trap_info; ht->tt && ht->signo; ht++)
+                if (ht->tt == tt)
+                        return ht->signo;
+
+        return SIGHUP;          /* default for things we don't know about */
+}
+
+void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
+{
+        int reg;
+
+#if (KGDB_GDB_REG_SIZE == 32)
+        u32 *ptr = (u32 *)gdb_regs;
+#else
+        u64 *ptr = (u64 *)gdb_regs;
+#endif
+
+        for (reg = 0; reg < 32; reg++)
+                *(ptr++) = regs->regs[reg];
+
+        *(ptr++) = regs->cp0_status;
+        *(ptr++) = regs->lo;
+        *(ptr++) = regs->hi;
+        *(ptr++) = regs->cp0_badvaddr;
+        *(ptr++) = regs->cp0_cause;
+        *(ptr++) = regs->cp0_epc;
+
+        /* FP REGS */
+        if (!(current && (regs->cp0_status & ST0_CU1)))
+                return;
+
+        save_fp(current);
+        for (reg = 0; reg < 32; reg++)
+                *(ptr++) = current->thread.fpu.fpr[reg];
+}
+
+void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs)
+{
+        int reg;
+
+#if (KGDB_GDB_REG_SIZE == 32)
+        const u32 *ptr = (u32 *)gdb_regs;
+#else
+        const u64 *ptr = (u64 *)gdb_regs;
+#endif
+
+        for (reg = 0; reg < 32; reg++)
+                regs->regs[reg] = *(ptr++);
+
+        regs->cp0_status = *(ptr++);
+        regs->lo = *(ptr++);
+        regs->hi = *(ptr++);
+        regs->cp0_badvaddr = *(ptr++);
+        regs->cp0_cause = *(ptr++);
+        regs->cp0_epc = *(ptr++);
+
+        /* FP REGS from current */
+        if (!(current && (regs->cp0_status & ST0_CU1)))
+                return;
+
+        for (reg = 0; reg < 32; reg++)
+                current->thread.fpu.fpr[reg] = *(ptr++);
+        restore_fp(current);
+}
+
+/*
+ * Similar to regs_to_gdb_regs() except that process is sleeping and so
+ * we may not be able to get all the info.
+ */
+void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p)
+{
+        int reg;
+        struct thread_info *ti = task_thread_info(p);
+        unsigned long ksp = (unsigned long)ti + THREAD_SIZE - 32;
+        struct pt_regs *regs = (struct pt_regs *)ksp - 1;
+#if (KGDB_GDB_REG_SIZE == 32)
+        u32 *ptr = (u32 *)gdb_regs;
+#else
+        u64 *ptr = (u64 *)gdb_regs;
+#endif
+
+        for (reg = 0; reg < 16; reg++)
+                *(ptr++) = regs->regs[reg];
+
+        /* S0 - S7 */
+        for (reg = 16; reg < 24; reg++)
+                *(ptr++) = regs->regs[reg];
+
+        for (reg = 24; reg < 28; reg++)
+                *(ptr++) = 0;
+
+        /* GP, SP, FP, RA */
+        for (reg = 28; reg < 32; reg++)
+                *(ptr++) = regs->regs[reg];
+
+        *(ptr++) = regs->cp0_status;
+        *(ptr++) = regs->lo;
+        *(ptr++) = regs->hi;
+        *(ptr++) = regs->cp0_badvaddr;
+        *(ptr++) = regs->cp0_cause;
+        *(ptr++) = regs->cp0_epc;
+}
+
+/*
+ * Calls linux_debug_hook before the kernel dies. If KGDB is enabled,
+ * then try to fall into the debugger
+ */
+static int kgdb_mips_notify(struct notifier_block *self, unsigned long cmd,
+                            void *ptr)
+{
+        struct die_args *args = (struct die_args *)ptr;
+        struct pt_regs *regs = args->regs;
+        int trap = (regs->cp0_cause & 0x7c) >> 2;
+
+        if (fixup_exception(regs))
+                return NOTIFY_DONE;
+
+        /* Userpace events, ignore. */
+        if (user_mode(regs))
+                return NOTIFY_DONE;
+
+        if (atomic_read(&kgdb_active) != -1)
+                kgdb_nmicallback(smp_processor_id(), regs);
+
+        if (kgdb_handle_exception(trap, compute_signal(trap), 0, regs))
+                return NOTIFY_DONE;
+
+        if (atomic_read(&kgdb_setting_breakpoint))
+                if ((trap == 9) && (regs->cp0_epc == (unsigned long)breakinst))
+                        regs->cp0_epc += 4;
+
+        /* In SMP mode, __flush_cache_all does IPI */
+        local_irq_enable();
+        __flush_cache_all();
+
+        return NOTIFY_STOP;
+}
+
+static struct notifier_block kgdb_notifier = {
+        .notifier_call = kgdb_mips_notify,
+};
+
+/*
+ * Handle the 's' and 'c' commands
+ */
+int kgdb_arch_handle_exception(int vector, int signo, int err_code,
+                               char *remcom_in_buffer, char *remcom_out_buffer,
+                               struct pt_regs *regs)
+{
+        char *ptr;
+        unsigned long address;
+        int cpu = smp_processor_id();
+
+        switch (remcom_in_buffer[0]) {
+        case 's':
+        case 'c':
+                /* handle the optional parameter */
+                ptr = &remcom_in_buffer[1];
+                if (kgdb_hex2long(&ptr, &address))
+                        regs->cp0_epc = address;
+
+                atomic_set(&kgdb_cpu_doing_single_step, -1);
+                if (remcom_in_buffer[0] == 's')
+                        if (kgdb_contthread)
+                                atomic_set(&kgdb_cpu_doing_single_step, cpu);
+
+                return 0;
+        }
+
+        return -1;
+}
+
+struct kgdb_arch arch_kgdb_ops;
+
+/*
+ * We use kgdb_early_setup so that functions we need to call now don't
+ * cause trouble when called again later.
+ */
+int kgdb_arch_init(void)
+{
+        union mips_instruction insn = {
+                .r_format = {
+                        .opcode = spec_op,
+                        .func   = break_op,
+                }
+        };
+        memcpy(arch_kgdb_ops.gdb_bpt_instr, insn.byte, BREAK_INSTR_SIZE);
+
+        register_die_notifier(&kgdb_notifier);
+
+        return 0;
+}
+
+/*
+ *      kgdb_arch_exit - Perform any architecture specific uninitalization.
+ *
+ *      This function will handle the uninitalization of any architecture
+ *      specific callbacks, for dynamic registration and unregistration.
+ */
+void kgdb_arch_exit(void)
+{
+        unregister_die_notifier(&kgdb_notifier);
+}
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index b8ea4e9d0d87..426cced1e9dc 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -23,6 +23,8 @@
 #include <linux/bootmem.h>
 #include <linux/interrupt.h>
 #include <linux/ptrace.h>
+#include <linux/kgdb.h>
+#include <linux/kdebug.h>
 
 #include <asm/bootinfo.h>
 #include <asm/branch.h>
@@ -425,6 +427,10 @@ asmlinkage void do_be(struct pt_regs *regs)
         printk(KERN_ALERT "%s bus error, epc == %0*lx, ra == %0*lx\n",
                data ? "Data" : "Instruction",
                field, regs->cp0_epc, field, regs->regs[31]);
+        if (notify_die(DIE_OOPS, "bus error", regs, SIGBUS, 0, 0)
+            == NOTIFY_STOP)
+                return;
+
         die_if_kernel("Oops", regs);
         force_sig(SIGBUS, current);
 }
@@ -623,6 +629,9 @@ asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31)
 {
         siginfo_t info;
 
+        if (notify_die(DIE_FP, "FP exception", regs, SIGFPE, 0, 0)
+            == NOTIFY_STOP)
+                return;
         die_if_kernel("FP exception in kernel code", regs);
 
         if (fcr31 & FPU_CSR_UNI_X) {
@@ -682,6 +691,9 @@ static void do_trap_or_bp(struct pt_regs *regs, unsigned int code,
         siginfo_t info;
         char b[40];
 
+        if (notify_die(DIE_TRAP, str, regs, code, 0, 0) == NOTIFY_STOP)
+                return;
+
         /*
          * A short test says that IRIX 5.3 sends SIGTRAP for all trap
          * insns, even for trap and break codes that indicate arithmetic
@@ -762,6 +774,10 @@ asmlinkage void do_ri(struct pt_regs *regs)
         unsigned int opcode = 0;
         int status = -1;
 
+        if (notify_die(DIE_RI, "RI Fault", regs, SIGSEGV, 0, 0)
+            == NOTIFY_STOP)
+                return;
+
         die_if_kernel("Reserved instruction in kernel code", regs);
 
         if (unlikely(compute_return_epc(regs) < 0))
@@ -1537,6 +1553,11 @@ void __init trap_init(void)
         extern char except_vec4;
         unsigned long i;
 
+#if defined(CONFIG_KGDB)
+        if (kgdb_early_setup)
+                return; /* Already done */
+#endif
+
         if (cpu_has_veic || cpu_has_vint)
                 ebase = (unsigned long) alloc_bootmem_low_pages(0x200 + VECTORSPACING*64);
         else
diff --git a/arch/mips/mm/tlb-r3k.c b/arch/mips/mm/tlb-r3k.c
index a782549ac80e..f0cf46adb978 100644
--- a/arch/mips/mm/tlb-r3k.c
+++ b/arch/mips/mm/tlb-r3k.c
@@ -246,10 +246,6 @@ void __init add_wired_entry(unsigned long entrylo0, unsigned long entrylo1,
                 old_pagemask = read_c0_pagemask();
                 w = read_c0_wired();
                 write_c0_wired(w + 1);
-                if (read_c0_wired() != w + 1) {
-                        printk("[tlbwired] No WIRED reg?\n");
-                        return;
-                }
                 write_c0_index(w << 8);
                 write_c0_pagemask(pagemask);
                 write_c0_entryhi(entryhi);
diff --git a/arch/mips/mti-malta/Makefile b/arch/mips/mti-malta/Makefile
index f8064446e812..3b7dd722c32a 100644
--- a/arch/mips/mti-malta/Makefile
+++ b/arch/mips/mti-malta/Makefile
@@ -13,7 +13,6 @@ obj-y				:= malta-amon.o malta-cmdline.o \
 
 obj-$(CONFIG_EARLY_PRINTK)      += malta-console.o
 obj-$(CONFIG_PCI)               += malta-pci.o
-obj-$(CONFIG_KGDB)              += malta-kgdb.o
 
 # FIXME FIXME FIXME
 obj-$(CONFIG_MIPS_MT_SMTC)      += malta_smtc.o
diff --git a/arch/mips/mti-malta/malta-init.c b/arch/mips/mti-malta/malta-init.c
index c0653021a171..4832af251668 100644
--- a/arch/mips/mti-malta/malta-init.c
+++ b/arch/mips/mti-malta/malta-init.c
@@ -37,15 +37,6 @@
 
 #include <asm/mips-boards/malta.h>
 
-#ifdef CONFIG_KGDB
-extern int rs_kgdb_hook(int, int);
-extern int rs_putDebugChar(char);
-extern char rs_getDebugChar(void);
-extern int saa9730_kgdb_hook(int);
-extern int saa9730_putDebugChar(char);
-extern char saa9730_getDebugChar(void);
-#endif
-
 int prom_argc;
 int *_prom_argv, *_prom_envp;
 
@@ -173,51 +164,6 @@ static void __init console_config(void)
 }
 #endif
 
-#ifdef CONFIG_KGDB
-void __init kgdb_config(void)
-{
-        extern int (*generic_putDebugChar)(char);
-        extern char (*generic_getDebugChar)(void);
-        char *argptr;
-        int line, speed;
-
-        argptr = prom_getcmdline();
-        if ((argptr = strstr(argptr, "kgdb=ttyS")) != NULL) {
-                argptr += strlen("kgdb=ttyS");
-                if (*argptr != '0' && *argptr != '1')
-                        printk("KGDB: Unknown serial line /dev/ttyS%c, "
-                               "falling back to /dev/ttyS1\n", *argptr);
-                line = *argptr == '0' ? 0 : 1;
-                printk("KGDB: Using serial line /dev/ttyS%d for session\n", line);
-
-                speed = 0;
-                if (*++argptr == ',')
-                {
-                        int c;
-                        while ((c = *++argptr) && ('0' <= c && c <= '9'))
-                                speed = speed * 10 + c - '0';
-                }
-                {
-                        speed = rs_kgdb_hook(line, speed);
-                        generic_putDebugChar = rs_putDebugChar;
-                        generic_getDebugChar = rs_getDebugChar;
-                }
-
-                pr_info("KGDB: Using serial line /dev/ttyS%d at %d for "
-                        "session, please connect your debugger\n",
-                        line ? 1 : 0, speed);
-
-                {
-                        char *s;
-                        for (s = "Please connect GDB to this port\r\n"; *s; )
-                                generic_putDebugChar(*s++);
-                }
-
-                /* Breakpoint is invoked after interrupts are initialised */
-        }
-}
-#endif
-
 static void __init mips_nmi_setup(void)
 {
         void *base;
diff --git a/arch/mips/mti-malta/malta-kgdb.c b/arch/mips/mti-malta/malta-kgdb.c
deleted file mode 100644
index 6a1854de4579..000000000000
--- a/arch/mips/mti-malta/malta-kgdb.c
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * This is the interface to the remote debugger stub.
- */
-#include <linux/types.h>
-#include <linux/serial.h>
-#include <linux/serialP.h>
-#include <linux/serial_reg.h>
-
-#include <asm/serial.h>
-#include <asm/io.h>
-
-static struct serial_state rs_table[] = {
-        SERIAL_PORT_DFNS        /* Defined in serial.h */
-};
-
-static struct async_struct kdb_port_info = {0};
-
-int (*generic_putDebugChar)(char);
-char (*generic_getDebugChar)(void);
-
-static __inline__ unsigned int serial_in(struct async_struct *info, int offset)
-{
-        return inb(info->port + offset);
-}
-
-static __inline__ void serial_out(struct async_struct *info, int offset,
-                                int value)
-{
-        outb(value, info->port+offset);
-}
-
-int rs_kgdb_hook(int tty_no, int speed) {
-        int t;
-        struct serial_state *ser = &rs_table[tty_no];
-
-        kdb_port_info.state = ser;
-        kdb_port_info.magic = SERIAL_MAGIC;
-        kdb_port_info.port = ser->port;
-        kdb_port_info.flags = ser->flags;
-
-        /*
-         * Clear all interrupts
-         */
-        serial_in(&kdb_port_info, UART_LSR);
-        serial_in(&kdb_port_info, UART_RX);
-        serial_in(&kdb_port_info, UART_IIR);
-        serial_in(&kdb_port_info, UART_MSR);
-
-        /*
-         * Now, initialize the UART
-         */
-        serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8);   /* reset DLAB */
-        if (kdb_port_info.flags & ASYNC_FOURPORT) {
-                kdb_port_info.MCR = UART_MCR_DTR | UART_MCR_RTS;
-                t = UART_MCR_DTR | UART_MCR_OUT1;
-        } else {
-                kdb_port_info.MCR
-                        = UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2;
-                t = UART_MCR_DTR | UART_MCR_RTS;
-        }
-
-        kdb_port_info.MCR = t;          /* no interrupts, please */
-        serial_out(&kdb_port_info, UART_MCR, kdb_port_info.MCR);
-
-        /*
-         * and set the speed of the serial port
-         */
-        if (speed == 0)
-                speed = 9600;
-
-        t = kdb_port_info.state->baud_base / speed;
-        /* set DLAB */
-        serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8 | UART_LCR_DLAB);
-        serial_out(&kdb_port_info, UART_DLL, t & 0xff);/* LS of divisor */
-        serial_out(&kdb_port_info, UART_DLM, t >> 8);  /* MS of divisor */
-        /* reset DLAB */
-        serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8);
-
-        return speed;
-}
-
-int putDebugChar(char c)
-{
-        return generic_putDebugChar(c);
-}
-
-char getDebugChar(void)
-{
-        return generic_getDebugChar();
-}
-
-int rs_putDebugChar(char c)
-{
-
-        if (!kdb_port_info.state) {     /* need to init device first */
-                return 0;
-        }
-
-        while ((serial_in(&kdb_port_info, UART_LSR) & UART_LSR_THRE) == 0)
-                ;
-
-        serial_out(&kdb_port_info, UART_TX, c);
-
-        return 1;
-}
-
-char rs_getDebugChar(void)
-{
-        if (!kdb_port_info.state) {     /* need to init device first */
-                return 0;
-        }
-
-        while (!(serial_in(&kdb_port_info, UART_LSR) & 1))
-                ;
-
-        return serial_in(&kdb_port_info, UART_RX);
-}
diff --git a/arch/mips/mti-malta/malta-setup.c b/arch/mips/mti-malta/malta-setup.c
index e7cad54936ca..dc78b8983eeb 100644
--- a/arch/mips/mti-malta/malta-setup.c
+++ b/arch/mips/mti-malta/malta-setup.c
@@ -199,10 +199,6 @@ void __init plat_mem_setup(void)
          */
         enable_dma(4);
 
-#ifdef CONFIG_KGDB
-        kgdb_config();
-#endif
-
 #ifdef CONFIG_DMA_COHERENT
         if (mips_revision_sconid != MIPS_REVISION_SCON_BONITO)
                 panic("Hardware DMA cache coherency not supported");
diff --git a/arch/mips/nxp/pnx8550/common/Makefile b/arch/mips/nxp/pnx8550/common/Makefile
index 31cc1a5cec3b..dd9e7b1f7fd3 100644
--- a/arch/mips/nxp/pnx8550/common/Makefile
+++ b/arch/mips/nxp/pnx8550/common/Makefile
@@ -24,6 +24,5 @@
 
 obj-y := setup.o prom.o int.o reset.o time.o proc.o platform.o
 obj-$(CONFIG_PCI) += pci.o
-obj-$(CONFIG_KGDB) += gdb_hook.o
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/nxp/pnx8550/common/gdb_hook.c b/arch/mips/nxp/pnx8550/common/gdb_hook.c
deleted file mode 100644
index ad4624f6d9bc..000000000000
--- a/arch/mips/nxp/pnx8550/common/gdb_hook.c
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
- *
- * ########################################################################
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * ########################################################################
- *
- * This is the interface to the remote debugger stub.
- *
- */
-#include <linux/types.h>
-#include <linux/serial.h>
-#include <linux/serialP.h>
-#include <linux/serial_reg.h>
-#include <linux/serial_ip3106.h>
-
-#include <asm/serial.h>
-#include <asm/io.h>
-
-#include <uart.h>
-
-static struct serial_state rs_table[IP3106_NR_PORTS] = {
-};
-static struct async_struct kdb_port_info = {0};
-
-void rs_kgdb_hook(int tty_no)
-{
-        struct serial_state *ser = &rs_table[tty_no];
-
-        kdb_port_info.state = ser;
-        kdb_port_info.magic = SERIAL_MAGIC;
-        kdb_port_info.port  = tty_no;
-        kdb_port_info.flags = ser->flags;
-
-        /*
-         * Clear all interrupts
-         */
-        /* Clear all the transmitter FIFO counters (pointer and status) */
-        ip3106_lcr(UART_BASE, tty_no) |= IP3106_UART_LCR_TX_RST;
-        /* Clear all the receiver FIFO counters (pointer and status) */
-        ip3106_lcr(UART_BASE, tty_no) |= IP3106_UART_LCR_RX_RST;
-        /* Clear all interrupts */
-        ip3106_iclr(UART_BASE, tty_no) = IP3106_UART_INT_ALLRX |
-                IP3106_UART_INT_ALLTX;
-
-        /*
-         * Now, initialize the UART
-         */
-        ip3106_lcr(UART_BASE, tty_no) = IP3106_UART_LCR_8BIT;
-        ip3106_baud(UART_BASE, tty_no) = 5; // 38400 Baud
-}
-
-int putDebugChar(char c)
-{
-        /* Wait until FIFO not full */
-        while (((ip3106_fifo(UART_BASE, kdb_port_info.port) & IP3106_UART_FIFO_TXFIFO) >> 16) >= 16)
-                ;
-        /* Send one char */
-        ip3106_fifo(UART_BASE, kdb_port_info.port) = c;
-
-        return 1;
-}
-
-char getDebugChar(void)
-{
-        char ch;
-
-        /* Wait until there is a char in the FIFO */
-        while (!((ip3106_fifo(UART_BASE, kdb_port_info.port) &
-                                        IP3106_UART_FIFO_RXFIFO) >> 8))
-                ;
-        /* Read one char */
-        ch = ip3106_fifo(UART_BASE, kdb_port_info.port) &
-                IP3106_UART_FIFO_RBRTHR;
-        /* Advance the RX FIFO read pointer */
-        ip3106_lcr(UART_BASE, kdb_port_info.port) |= IP3106_UART_LCR_RX_NEXT;
-        return (ch);
-}
-
-void rs_disable_debug_interrupts(void)
-{
-        ip3106_ien(UART_BASE, kdb_port_info.port) = 0; /* Disable all interrupts */
-}
-
-void rs_enable_debug_interrupts(void)
-{
-        /* Clear all the transmitter FIFO counters (pointer and status) */
-        ip3106_lcr(UART_BASE, kdb_port_info.port) |= IP3106_UART_LCR_TX_RST;
-        /* Clear all the receiver FIFO counters (pointer and status) */
-        ip3106_lcr(UART_BASE, kdb_port_info.port) |= IP3106_UART_LCR_RX_RST;
-        /* Clear all interrupts */
-        ip3106_iclr(UART_BASE, kdb_port_info.port) = IP3106_UART_INT_ALLRX |
-                IP3106_UART_INT_ALLTX;
-        ip3106_ien(UART_BASE, kdb_port_info.port)  = IP3106_UART_INT_ALLRX; /* Enable RX interrupts */
-}
diff --git a/arch/mips/nxp/pnx8550/common/int.c b/arch/mips/nxp/pnx8550/common/int.c
index aad03429a5e3..f080f114a1bf 100644
--- a/arch/mips/nxp/pnx8550/common/int.c
+++ b/arch/mips/nxp/pnx8550/common/int.c
@@ -34,7 +34,6 @@
 #include <linux/module.h>
 
 #include <asm/io.h>
-#include <asm/gdb-stub.h>
 #include <int.h>
 #include <uart.h>
 
diff --git a/arch/mips/nxp/pnx8550/common/proc.c b/arch/mips/nxp/pnx8550/common/proc.c
index 18b125e3b65d..acf1fa889444 100644
--- a/arch/mips/nxp/pnx8550/common/proc.c
+++ b/arch/mips/nxp/pnx8550/common/proc.c
@@ -22,7 +22,6 @@
 #include <linux/random.h>
 
 #include <asm/io.h>
-#include <asm/gdb-stub.h>
 #include <int.h>
 #include <uart.h>
 
diff --git a/arch/mips/nxp/pnx8550/common/setup.c b/arch/mips/nxp/pnx8550/common/setup.c
index 92d764c97701..2aed50fef10f 100644
--- a/arch/mips/nxp/pnx8550/common/setup.c
+++ b/arch/mips/nxp/pnx8550/common/setup.c
@@ -47,7 +47,6 @@ extern void pnx8550_machine_halt(void);
 extern void pnx8550_machine_power_off(void);
 extern struct resource ioport_resource;
 extern struct resource iomem_resource;
-extern void rs_kgdb_hook(int tty_no);
 extern char *prom_getcmdline(void);
 
 struct resource standard_io_resources[] = {
@@ -142,16 +141,5 @@ void __init plat_mem_setup(void)
                 ip3106_baud(UART_BASE, pnx8550_console_port) = 5;
         }
 
-#ifdef CONFIG_KGDB
-        argptr = prom_getcmdline();
-        if ((argptr = strstr(argptr, "kgdb=ttyS")) != NULL) {
-                int line;
-                argptr += strlen("kgdb=ttyS");
-                line = *argptr == '0' ? 0 : 1;
-                rs_kgdb_hook(line);
-                pr_info("KGDB: Using ttyS%i for session, "
-                        "please connect your debugger\n", line ? 1 : 0);
-        }
-#endif
         return;
 }
diff --git a/arch/mips/pci/ops-tx3927.c b/arch/mips/pci/ops-tx3927.c
index 8a17a39e5bf2..31c150196595 100644
--- a/arch/mips/pci/ops-tx3927.c
+++ b/arch/mips/pci/ops-tx3927.c
@@ -37,45 +37,48 @@
 #include <linux/pci.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/interrupt.h>
 
 #include <asm/addrspace.h>
+#include <asm/txx9irq.h>
+#include <asm/txx9/pci.h>
 #include <asm/txx9/tx3927.h>
 
-static inline int mkaddr(unsigned char bus, unsigned char dev_fn,
-        unsigned char where)
+static int mkaddr(struct pci_bus *bus, unsigned char devfn, unsigned char where)
 {
-        if (bus == 0 && dev_fn >= PCI_DEVFN(TX3927_PCIC_MAX_DEVNU, 0))
-                return PCIBIOS_DEVICE_NOT_FOUND;
-
-        tx3927_pcicptr->ica = ((bus & 0xff) << 0x10) |
-                              ((dev_fn & 0xff) << 0x08) |
-                              (where & 0xfc);
+        if (bus->parent == NULL &&
+            devfn >= PCI_DEVFN(TX3927_PCIC_MAX_DEVNU, 0))
+                return -1;
+        tx3927_pcicptr->ica =
+                ((bus->number & 0xff) << 0x10) |
+                ((devfn & 0xff) << 0x08) |
+                (where & 0xfc) | (bus->parent ? 1 : 0);
 
         /* clear M_ABORT and Disable M_ABORT Int. */
         tx3927_pcicptr->pcistat |= PCI_STATUS_REC_MASTER_ABORT;
         tx3927_pcicptr->pcistatim &= ~PCI_STATUS_REC_MASTER_ABORT;
-
-        return PCIBIOS_SUCCESSFUL;
+        return 0;
 }
 
 static inline int check_abort(void)
 {
-        if (tx3927_pcicptr->pcistat & PCI_STATUS_REC_MASTER_ABORT)
+        if (tx3927_pcicptr->pcistat & PCI_STATUS_REC_MASTER_ABORT) {
                 tx3927_pcicptr->pcistat |= PCI_STATUS_REC_MASTER_ABORT;
                 tx3927_pcicptr->pcistatim |= PCI_STATUS_REC_MASTER_ABORT;
+                /* flush write buffer */
+                iob();
                 return PCIBIOS_DEVICE_NOT_FOUND;
-
+        }
         return PCIBIOS_SUCCESSFUL;
 }
 
 static int tx3927_pci_read_config(struct pci_bus *bus, unsigned int devfn,
         int where, int size, u32 * val)
 {
-        int ret;
-
-        ret = mkaddr(bus->number, devfn, where);
-        if (ret)
-                return ret;
+        if (mkaddr(bus, devfn, where)) {
+                *val = 0xffffffff;
+                return PCIBIOS_DEVICE_NOT_FOUND;
+        }
 
         switch (size) {
         case 1:
@@ -97,11 +100,8 @@ static int tx3927_pci_read_config(struct pci_bus *bus, unsigned int devfn,
 static int tx3927_pci_write_config(struct pci_bus *bus, unsigned int devfn,
         int where, int size, u32 val)
 {
-        int ret;
-
-        ret = mkaddr(bus->number, devfn, where);
-        if (ret)
-                return ret;
+        if (mkaddr(bus, devfn, where))
+                return PCIBIOS_DEVICE_NOT_FOUND;
 
         switch (size) {
         case 1:
@@ -117,11 +117,6 @@ static int tx3927_pci_write_config(struct pci_bus *bus, unsigned int devfn,
                 tx3927_pcicptr->icd = cpu_to_le32(val);
         }
 
-        if (tx3927_pcicptr->pcistat & PCI_STATUS_REC_MASTER_ABORT)
-                tx3927_pcicptr->pcistat |= PCI_STATUS_REC_MASTER_ABORT;
-                tx3927_pcicptr->pcistatim |= PCI_STATUS_REC_MASTER_ABORT;
-                return PCIBIOS_DEVICE_NOT_FOUND;
-
         return check_abort();
 }
 
@@ -202,3 +197,34 @@ void __init tx3927_pcic_setup(struct pci_controller *channel,
                 PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
         local_irq_restore(flags);
 }
+
+static irqreturn_t tx3927_pcierr_interrupt(int irq, void *dev_id)
+{
+        struct pt_regs *regs = get_irq_regs();
+
+        if (txx9_pci_err_action != TXX9_PCI_ERR_IGNORE) {
+                printk(KERN_WARNING "PCI error interrupt at 0x%08lx.\n",
+                       regs->cp0_epc);
+                printk(KERN_WARNING "pcistat:%02x, lbstat:%04lx\n",
+                       tx3927_pcicptr->pcistat, tx3927_pcicptr->lbstat);
+        }
+        if (txx9_pci_err_action != TXX9_PCI_ERR_PANIC) {
+                /* clear all pci errors */
+                tx3927_pcicptr->pcistat |= TX3927_PCIC_PCISTATIM_ALL;
+                tx3927_pcicptr->istat = TX3927_PCIC_IIM_ALL;
+                tx3927_pcicptr->tstat = TX3927_PCIC_TIM_ALL;
+                tx3927_pcicptr->lbstat = TX3927_PCIC_LBIM_ALL;
+                return IRQ_HANDLED;
+        }
+        console_verbose();
+        panic("PCI error.");
+}
+
+void __init tx3927_setup_pcierr_irq(void)
+{
+        if (request_irq(TXX9_IRQ_BASE + TX3927_IR_PCI,
+                        tx3927_pcierr_interrupt,
+                        IRQF_DISABLED, "PCI error",
+                        (void *)TX3927_PCIC_REG))
+                printk(KERN_WARNING "Failed to request irq for PCIERR\n");
+}
diff --git a/arch/mips/pci/ops-tx4927.c b/arch/mips/pci/ops-tx4927.c
index c6b49bccd274..5989e747527f 100644
--- a/arch/mips/pci/ops-tx4927.c
+++ b/arch/mips/pci/ops-tx4927.c
@@ -16,6 +16,8 @@
  * option) any later version.
  */
 #include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <asm/txx9/pci.h>
 #include <asm/txx9/tx4927pcic.h>
 
 static struct {
@@ -85,6 +87,8 @@ static int check_abort(struct tx4927_pcic_reg __iomem *pcicptr)
                 __raw_writel((__raw_readl(&pcicptr->pcistatus) & 0x0000ffff)
                              | (PCI_STATUS_REC_MASTER_ABORT << 16),
                              &pcicptr->pcistatus);
+                /* flush write buffer */
+                iob();
                 code = PCIBIOS_DEVICE_NOT_FOUND;
         }
         return code;
@@ -192,6 +196,28 @@ static struct {
         .gbwc = 0xfe0,  /* 4064 GBUSCLK for CCFG.GTOT=0b11 */
 };
 
+char *__devinit tx4927_pcibios_setup(char *str)
+{
+        unsigned long val;
+
+        if (!strncmp(str, "trdyto=", 7)) {
+                if (strict_strtoul(str + 7, 0, &val) == 0)
+                        tx4927_pci_opts.trdyto = val;
+                return NULL;
+        }
+        if (!strncmp(str, "retryto=", 8)) {
+                if (strict_strtoul(str + 8, 0, &val) == 0)
+                        tx4927_pci_opts.retryto = val;
+                return NULL;
+        }
+        if (!strncmp(str, "gbwc=", 5)) {
+                if (strict_strtoul(str + 5, 0, &val) == 0)
+                        tx4927_pci_opts.gbwc = val;
+                return NULL;
+        }
+        return str;
+}
+
 void __init tx4927_pcic_setup(struct tx4927_pcic_reg __iomem *pcicptr,
                               struct pci_controller *channel, int extarb)
 {
@@ -406,3 +432,95 @@ void tx4927_report_pcic_status(void)
                         tx4927_report_pcic_status1(pcicptrs[i].pcicptr);
         }
 }
+
+static void tx4927_dump_pcic_settings1(struct tx4927_pcic_reg __iomem *pcicptr)
+{
+        int i;
+        __u32 __iomem *preg = (__u32 __iomem *)pcicptr;
+
+        printk(KERN_INFO "tx4927 pcic (0x%p) settings:", pcicptr);
+        for (i = 0; i < sizeof(struct tx4927_pcic_reg); i += 4, preg++) {
+                if (i % 32 == 0) {
+                        printk(KERN_CONT "\n");
+                        printk(KERN_INFO "%04x:", i);
+                }
+                /* skip registers with side-effects */
+                if (i == offsetof(struct tx4927_pcic_reg, g2pintack)
+                    || i == offsetof(struct tx4927_pcic_reg, g2pspc)
+                    || i == offsetof(struct tx4927_pcic_reg, g2pcfgadrs)
+                    || i == offsetof(struct tx4927_pcic_reg, g2pcfgdata)) {
+                        printk(KERN_CONT " XXXXXXXX");
+                        continue;
+                }
+                printk(KERN_CONT " %08x", __raw_readl(preg));
+        }
+        printk(KERN_CONT "\n");
+}
+
+void tx4927_dump_pcic_settings(void)
+{
+        int i;
+
+        for (i = 0; i < ARRAY_SIZE(pcicptrs); i++) {
+                if (pcicptrs[i].pcicptr)
+                        tx4927_dump_pcic_settings1(pcicptrs[i].pcicptr);
+        }
+}
+
+irqreturn_t tx4927_pcierr_interrupt(int irq, void *dev_id)
+{
+        struct pt_regs *regs = get_irq_regs();
+        struct tx4927_pcic_reg __iomem *pcicptr =
+                (struct tx4927_pcic_reg __iomem *)(unsigned long)dev_id;
+
+        if (txx9_pci_err_action != TXX9_PCI_ERR_IGNORE) {
+                printk(KERN_WARNING "PCIERR interrupt at 0x%0*lx\n",
+                       (int)(2 * sizeof(unsigned long)), regs->cp0_epc);
+                tx4927_report_pcic_status1(pcicptr);
+        }
+        if (txx9_pci_err_action != TXX9_PCI_ERR_PANIC) {
+                /* clear all pci errors */
+                __raw_writel((__raw_readl(&pcicptr->pcistatus) & 0x0000ffff)
+                             | (TX4927_PCIC_PCISTATUS_ALL << 16),
+                             &pcicptr->pcistatus);
+                __raw_writel(TX4927_PCIC_G2PSTATUS_ALL, &pcicptr->g2pstatus);
+                __raw_writel(TX4927_PCIC_PBASTATUS_ALL, &pcicptr->pbastatus);
+                __raw_writel(TX4927_PCIC_PCICSTATUS_ALL, &pcicptr->pcicstatus);
+                return IRQ_HANDLED;
+        }
+        console_verbose();
+        tx4927_dump_pcic_settings1(pcicptr);
+        panic("PCI error.");
+}
+
+#ifdef CONFIG_TOSHIBA_FPCIB0
+static void __init tx4927_quirk_slc90e66_bridge(struct pci_dev *dev)
+{
+        struct tx4927_pcic_reg __iomem *pcicptr = pci_bus_to_pcicptr(dev->bus);
+
+        if (!pcicptr)
+                return;
+        if (__raw_readl(&pcicptr->pbacfg) & TX4927_PCIC_PBACFG_PBAEN) {
+                /* Reset Bus Arbiter */
+                __raw_writel(TX4927_PCIC_PBACFG_RPBA, &pcicptr->pbacfg);
+                /*
+                 * swap reqBP and reqXP (raise priority of SLC90E66).
+                 * SLC90E66(PCI-ISA bridge) is connected to REQ2 on
+                 * PCI Backplane board.
+                 */
+                __raw_writel(0x72543610, &pcicptr->pbareqport);
+                __raw_writel(0, &pcicptr->pbabm);
+                /* Use Fixed ParkMaster (required by SLC90E66) */
+                __raw_writel(TX4927_PCIC_PBACFG_FIXPA, &pcicptr->pbacfg);
+                /* Enable Bus Arbiter */
+                __raw_writel(TX4927_PCIC_PBACFG_FIXPA |
+                             TX4927_PCIC_PBACFG_PBAEN,
+                             &pcicptr->pbacfg);
+                printk(KERN_INFO "PCI: Use Fixed Park Master (REQPORT %08x)\n",
+                       __raw_readl(&pcicptr->pbareqport));
+        }
+}
+#define PCI_DEVICE_ID_EFAR_SLC90E66_0 0x9460
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_0,
+        tx4927_quirk_slc90e66_bridge);
+#endif
diff --git a/arch/mips/pci/pci-tx4927.c b/arch/mips/pci/pci-tx4927.c
index 27e86a09dd41..aaa900596792 100644
--- a/arch/mips/pci/pci-tx4927.c
+++ b/arch/mips/pci/pci-tx4927.c
@@ -15,6 +15,7 @@
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/kernel.h>
+#include <linux/interrupt.h>
 #include <asm/txx9/generic.h>
 #include <asm/txx9/tx4927.h>
 
@@ -81,3 +82,12 @@ int __init tx4927_pciclk66_setup(void)
                 pciclk = -1;
         return pciclk;
 }
+
+void __init tx4927_setup_pcierr_irq(void)
+{
+        if (request_irq(TXX9_IRQ_BASE + TX4927_IR_PCIERR,
+                        tx4927_pcierr_interrupt,
+                        IRQF_DISABLED, "PCI error",
+                        (void *)TX4927_PCIC_REG))
+                printk(KERN_WARNING "Failed to request irq for PCIERR\n");
+}
diff --git a/arch/mips/pci/pci-tx4938.c b/arch/mips/pci/pci-tx4938.c
index e5375511c2b7..60e2c52c2c5e 100644
--- a/arch/mips/pci/pci-tx4938.c
+++ b/arch/mips/pci/pci-tx4938.c
@@ -15,6 +15,7 @@
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/kernel.h>
+#include <linux/interrupt.h>
 #include <asm/txx9/generic.h>
 #include <asm/txx9/tx4938.h>
 
@@ -132,3 +133,12 @@ int tx4938_pcic1_map_irq(const struct pci_dev *dev, u8 slot)
         }
         return -1;
 }
+
+void __init tx4938_setup_pcierr_irq(void)
+{
+        if (request_irq(TXX9_IRQ_BASE + TX4938_IR_PCIERR,
+                        tx4927_pcierr_interrupt,
+                        IRQF_DISABLED, "PCI error",
+                        (void *)TX4927_PCIC_REG))
+                printk(KERN_WARNING "Failed to request irq for PCIERR\n");
+}
diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c
index 77bd5b68dc43..c7fe6ec621e6 100644
--- a/arch/mips/pci/pci.c
+++ b/arch/mips/pci/pci.c
@@ -328,7 +328,11 @@ EXPORT_SYMBOL(PCIBIOS_MIN_IO);
 EXPORT_SYMBOL(PCIBIOS_MIN_MEM);
 #endif
 
-char *pcibios_setup(char *str)
+char * (*pcibios_plat_setup)(char *str) __devinitdata;
+
+char *__devinit pcibios_setup(char *str)
 {
+        if (pcibios_plat_setup)
+                return pcibios_plat_setup(str);
         return str;
 }
diff --git a/arch/mips/pmc-sierra/msp71xx/msp_serial.c b/arch/mips/pmc-sierra/msp71xx/msp_serial.c
index 9de34302e5f4..f7261628d8a6 100644
--- a/arch/mips/pmc-sierra/msp71xx/msp_serial.c
+++ b/arch/mips/pmc-sierra/msp71xx/msp_serial.c
@@ -38,68 +38,6 @@
 #include <msp_int.h>
 #include <msp_regs.h>
 
-#ifdef CONFIG_KGDB
-/*
- * kgdb uses serial port 1 so the console can remain on port 0.
- * To use port 0 change the definition to read as follows:
- * #define DEBUG_PORT_BASE KSEG1ADDR(MSP_UART0_BASE)
- */
-#define DEBUG_PORT_BASE KSEG1ADDR(MSP_UART1_BASE)
-
-int putDebugChar(char c)
-{
-        volatile uint32_t *uart = (volatile uint32_t *)DEBUG_PORT_BASE;
-        uint32_t val = (uint32_t)c;
-
-        local_irq_disable();
-        while( !(uart[5] & 0x20) ); /* Wait for TXRDY */
-        uart[0] = val;
-        while( !(uart[5] & 0x20) ); /* Wait for TXRDY */
-        local_irq_enable();
-
-        return 1;
-}
-
-char getDebugChar(void)
-{
-        volatile uint32_t *uart = (volatile uint32_t *)DEBUG_PORT_BASE;
-        uint32_t val;
-
-        while( !(uart[5] & 0x01) ); /* Wait for RXRDY */
-        val = uart[0];
-
-        return (char)val;
-}
-
-void initDebugPort(unsigned int uartclk, unsigned int baudrate)
-{
-        unsigned int baud_divisor = (uartclk + 8 * baudrate)/(16 * baudrate);
-
-        /* Enable FIFOs */
-        writeb(UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR |
-                        UART_FCR_CLEAR_XMIT | UART_FCR_TRIGGER_4,
-                (char *)DEBUG_PORT_BASE + (UART_FCR * 4));
-
-        /* Select brtc divisor */
-        writeb(UART_LCR_DLAB, (char *)DEBUG_PORT_BASE + (UART_LCR * 4));
-
-        /* Store divisor lsb */
-        writeb(baud_divisor, (char *)DEBUG_PORT_BASE + (UART_TX * 4));
-
-        /* Store divisor msb */
-        writeb(baud_divisor >> 8, (char *)DEBUG_PORT_BASE + (UART_IER * 4));
-
-        /* Set 8N1 mode */
-        writeb(UART_LCR_WLEN8, (char *)DEBUG_PORT_BASE + (UART_LCR * 4));
-
-        /* Disable flow control */
-        writeb(0, (char *)DEBUG_PORT_BASE + (UART_MCR * 4));
-
-        /* Disable receive interrupt(!) */
-        writeb(0, (char *)DEBUG_PORT_BASE + (UART_IER * 4));
-}
-#endif
-
 void __init msp_serial_setup(void)
 {
         char    *s;
@@ -139,17 +77,6 @@ void __init msp_serial_setup(void)
                 case MACH_MSP7120_FPGA:
                         /* Enable UART1 on MSP4200 and MSP7120 */
                         *GPIO_CFG2_REG = 0x00002299;
-
-#ifdef CONFIG_KGDB
-                        /* Initialize UART1 for kgdb since PMON doesn't */
-                        if( DEBUG_PORT_BASE == KSEG1ADDR(MSP_UART1_BASE) ) {
-                                if( mips_machtype == MACH_MSP4200_FPGA
-                                 || mips_machtype == MACH_MSP7120_FPGA )
-                                        initDebugPort(uartclk, 19200);
-                                else
-                                        initDebugPort(uartclk, 57600);
-                        }
-#endif
                         break;
 
                 default:
diff --git a/arch/mips/pmc-sierra/yosemite/Makefile b/arch/mips/pmc-sierra/yosemite/Makefile
index 8fd9a04e3534..b16f95c3df65 100644
--- a/arch/mips/pmc-sierra/yosemite/Makefile
+++ b/arch/mips/pmc-sierra/yosemite/Makefile
@@ -4,7 +4,6 @@
 
 obj-y    += irq.o prom.o py-console.o setup.o
 
-obj-$(CONFIG_KGDB)              += dbg_io.o
 obj-$(CONFIG_SMP)               += smp.o
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/pmc-sierra/yosemite/dbg_io.c b/arch/mips/pmc-sierra/yosemite/dbg_io.c
deleted file mode 100644
index 6362c702e389..000000000000
--- a/arch/mips/pmc-sierra/yosemite/dbg_io.c
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- * Copyright 2003 PMC-Sierra
- * Author: Manish Lachwani (lachwani@pmc-sierra.com)
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/*
- * Support for KGDB for the Yosemite board. We make use of single serial
- * port to be used for KGDB as well as console. The second serial port
- * seems to be having a problem. Single IRQ is allocated for both the
- * ports. Hence, the interrupt routing code needs to figure out whether
- * the interrupt came from channel A or B.
- */
-
-#include <asm/serial.h>
-
-/*
- * Baud rate, Parity, Data and Stop bit settings for the
- * serial port on the Yosemite. Note that the Early printk
- * patch has been added. So, we should be all set to go
- */
-#define YOSEMITE_BAUD_2400      2400
-#define YOSEMITE_BAUD_4800      4800
-#define YOSEMITE_BAUD_9600      9600
-#define YOSEMITE_BAUD_19200     19200
-#define YOSEMITE_BAUD_38400     38400
-#define YOSEMITE_BAUD_57600     57600
-#define YOSEMITE_BAUD_115200    115200
-
-#define YOSEMITE_PARITY_NONE    0
-#define YOSEMITE_PARITY_ODD     0x08
-#define YOSEMITE_PARITY_EVEN    0x18
-#define YOSEMITE_PARITY_MARK    0x28
-#define YOSEMITE_PARITY_SPACE   0x38
-
-#define YOSEMITE_DATA_5BIT      0x0
-#define YOSEMITE_DATA_6BIT      0x1
-#define YOSEMITE_DATA_7BIT      0x2
-#define YOSEMITE_DATA_8BIT      0x3
-
-#define YOSEMITE_STOP_1BIT      0x0
-#define YOSEMITE_STOP_2BIT      0x4
-
-/* This is crucial */
-#define SERIAL_REG_OFS          0x1
-
-#define SERIAL_RCV_BUFFER       0x0
-#define SERIAL_TRANS_HOLD       0x0
-#define SERIAL_SEND_BUFFER      0x0
-#define SERIAL_INTR_ENABLE      (1 * SERIAL_REG_OFS)
-#define SERIAL_INTR_ID          (2 * SERIAL_REG_OFS)
-#define SERIAL_DATA_FORMAT      (3 * SERIAL_REG_OFS)
-#define SERIAL_LINE_CONTROL     (3 * SERIAL_REG_OFS)
-#define SERIAL_MODEM_CONTROL    (4 * SERIAL_REG_OFS)
-#define SERIAL_RS232_OUTPUT     (4 * SERIAL_REG_OFS)
-#define SERIAL_LINE_STATUS      (5 * SERIAL_REG_OFS)
-#define SERIAL_MODEM_STATUS     (6 * SERIAL_REG_OFS)
-#define SERIAL_RS232_INPUT      (6 * SERIAL_REG_OFS)
-#define SERIAL_SCRATCH_PAD      (7 * SERIAL_REG_OFS)
-
-#define SERIAL_DIVISOR_LSB      (0 * SERIAL_REG_OFS)
-#define SERIAL_DIVISOR_MSB      (1 * SERIAL_REG_OFS)
-
-/*
- * Functions to READ and WRITE to serial port 0
- */
-#define SERIAL_READ(ofs)                (*((volatile unsigned char*)    \
-                                        (TITAN_SERIAL_BASE + ofs)))
-
-#define SERIAL_WRITE(ofs, val)          ((*((volatile unsigned char*)   \
-                                        (TITAN_SERIAL_BASE + ofs))) = val)
-
-/*
- * Functions to READ and WRITE to serial port 1
- */
-#define SERIAL_READ_1(ofs)              (*((volatile unsigned char*)    \
-                                        (TITAN_SERIAL_BASE_1 + ofs)))
-
-#define SERIAL_WRITE_1(ofs, val)        ((*((volatile unsigned char*)   \
-                                        (TITAN_SERIAL_BASE_1 + ofs))) = val)
-
-/*
- * Second serial port initialization
- */
-void init_second_port(void)
-{
-        /* Disable Interrupts */
-        SERIAL_WRITE_1(SERIAL_LINE_CONTROL, 0x0);
-        SERIAL_WRITE_1(SERIAL_INTR_ENABLE, 0x0);
-
-        {
-                unsigned int divisor;
-
-                SERIAL_WRITE_1(SERIAL_LINE_CONTROL, 0x80);
-                divisor = TITAN_SERIAL_BASE_BAUD / YOSEMITE_BAUD_115200;
-                SERIAL_WRITE_1(SERIAL_DIVISOR_LSB, divisor & 0xff);
-
-                SERIAL_WRITE_1(SERIAL_DIVISOR_MSB,
-                               (divisor & 0xff00) >> 8);
-                SERIAL_WRITE_1(SERIAL_LINE_CONTROL, 0x0);
-        }
-
-        SERIAL_WRITE_1(SERIAL_DATA_FORMAT, YOSEMITE_DATA_8BIT |
-                       YOSEMITE_PARITY_NONE | YOSEMITE_STOP_1BIT);
-
-        /* Enable Interrupts */
-        SERIAL_WRITE_1(SERIAL_INTR_ENABLE, 0xf);
-}
-
-/* Initialize the serial port for KGDB debugging */
-void debugInit(unsigned int baud, unsigned char data, unsigned char parity,
-               unsigned char stop)
-{
-        /* Disable Interrupts */
-        SERIAL_WRITE(SERIAL_LINE_CONTROL, 0x0);
-        SERIAL_WRITE(SERIAL_INTR_ENABLE, 0x0);
-
-        {
-                unsigned int divisor;
-
-                SERIAL_WRITE(SERIAL_LINE_CONTROL, 0x80);
-
-                divisor = TITAN_SERIAL_BASE_BAUD / baud;
-                SERIAL_WRITE(SERIAL_DIVISOR_LSB, divisor & 0xff);
-
-                SERIAL_WRITE(SERIAL_DIVISOR_MSB, (divisor & 0xff00) >> 8);
-                SERIAL_WRITE(SERIAL_LINE_CONTROL, 0x0);
-        }
-
-        SERIAL_WRITE(SERIAL_DATA_FORMAT, data | parity | stop);
-}
-
-static int remoteDebugInitialized = 0;
-
-unsigned char getDebugChar(void)
-{
-        if (!remoteDebugInitialized) {
-                remoteDebugInitialized = 1;
-                debugInit(YOSEMITE_BAUD_115200,
-                          YOSEMITE_DATA_8BIT,
-                          YOSEMITE_PARITY_NONE, YOSEMITE_STOP_1BIT);
-        }
-
-        while ((SERIAL_READ(SERIAL_LINE_STATUS) & 0x1) == 0);
-        return SERIAL_READ(SERIAL_RCV_BUFFER);
-}
-
-int putDebugChar(unsigned char byte)
-{
-        if (!remoteDebugInitialized) {
-                remoteDebugInitialized = 1;
-                debugInit(YOSEMITE_BAUD_115200,
-                          YOSEMITE_DATA_8BIT,
-                          YOSEMITE_PARITY_NONE, YOSEMITE_STOP_1BIT);
-        }
-
-        while ((SERIAL_READ(SERIAL_LINE_STATUS) & 0x20) == 0);
-        SERIAL_WRITE(SERIAL_SEND_BUFFER, byte);
-
-        return 1;
-}
diff --git a/arch/mips/pmc-sierra/yosemite/irq.c b/arch/mips/pmc-sierra/yosemite/irq.c
index 4decc2807867..5f673eba142c 100644
--- a/arch/mips/pmc-sierra/yosemite/irq.c
+++ b/arch/mips/pmc-sierra/yosemite/irq.c
@@ -141,10 +141,6 @@ asmlinkage void plat_irq_dispatch(void)
         }
 }
 
-#ifdef CONFIG_KGDB
-extern void init_second_port(void);
-#endif
-
 /*
  * Initialize the next level interrupt handler
  */
@@ -156,11 +152,6 @@ void __init arch_init_irq(void)
         rm7k_cpu_irq_init();
         rm9k_cpu_irq_init();
 
-#ifdef CONFIG_KGDB
-        /* At this point, initialize the second serial port */
-        init_second_port();
-#endif
-
 #ifdef CONFIG_GDB_CONSOLE
         register_gdb_console();
 #endif
diff --git a/arch/mips/rb532/gpio.c b/arch/mips/rb532/gpio.c
index b2fe82dba0a5..00a1c7877bf4 100644
--- a/arch/mips/rb532/gpio.c
+++ b/arch/mips/rb532/gpio.c
@@ -64,7 +64,8 @@ static struct resource rb532_dev3_ctl_res[] = {
 
 void set_434_reg(unsigned reg_offs, unsigned bit, unsigned len, unsigned val)
 {
-        unsigned flags, data;
+        unsigned long flags;
+        unsigned data;
         unsigned i = 0;
 
         spin_lock_irqsave(&dev3.lock, flags);
@@ -90,7 +91,7 @@ EXPORT_SYMBOL(get_434_reg);
 
 void set_latch_u5(unsigned char or_mask, unsigned char nand_mask)
 {
-        unsigned flags;
+        unsigned long flags;
 
         spin_lock_irqsave(&dev3.lock, flags);
 
diff --git a/arch/mips/rb532/time.c b/arch/mips/rb532/time.c
index db74edf8cefb..8e7a46855b50 100644
--- a/arch/mips/rb532/time.c
+++ b/arch/mips/rb532/time.c
@@ -49,8 +49,8 @@ static unsigned long __init cal_r4koff(void)
 
 void __init plat_time_init(void)
 {
-        unsigned int est_freq, flags;
-        unsigned long r4k_offset;
+        unsigned int est_freq;
+        unsigned long flags, r4k_offset;
 
         local_irq_save(flags);
 
diff --git a/arch/mips/sgi-ip22/ip22-setup.c b/arch/mips/sgi-ip22/ip22-setup.c
index 5f389ee26fca..896a1ef84829 100644
--- a/arch/mips/sgi-ip22/ip22-setup.c
+++ b/arch/mips/sgi-ip22/ip22-setup.c
@@ -20,7 +20,6 @@
 #include <asm/irq.h>
 #include <asm/reboot.h>
 #include <asm/time.h>
-#include <asm/gdb-stub.h>
 #include <asm/io.h>
 #include <asm/traps.h>
 #include <asm/sgialib.h>
@@ -81,30 +80,6 @@ void __init plat_mem_setup(void)
                 add_preferred_console("arc", 0, NULL);
         }
 
-#ifdef CONFIG_KGDB
-        {
-        char *kgdb_ttyd = prom_getcmdline();
-
-        if ((kgdb_ttyd = strstr(kgdb_ttyd, "kgdb=ttyd")) != NULL) {
-                int line;
-                kgdb_ttyd += strlen("kgdb=ttyd");
-                if (*kgdb_ttyd != '1' && *kgdb_ttyd != '2')
-                        printk(KERN_INFO "KGDB: Uknown serial line /dev/ttyd%c"
-                               ", falling back to /dev/ttyd1\n", *kgdb_ttyd);
-                line = *kgdb_ttyd == '2' ? 0 : 1;
-                printk(KERN_INFO "KGDB: Using serial line /dev/ttyd%d for "
-                       "session\n", line ? 1 : 2);
-                rs_kgdb_hook(line);
-
-                printk(KERN_INFO "KGDB: Using serial line /dev/ttyd%d for "
-                       "session, please connect your debugger\n", line ? 1:2);
-
-                kgdb_enabled = 1;
-                /* Breakpoints and stuff are in sgi_irq_setup() */
-        }
-        }
-#endif
-
 #if defined(CONFIG_VT) && defined(CONFIG_SGI_NEWPORT_CONSOLE)
         {
                 ULONG *gfxinfo;
diff --git a/arch/mips/sgi-ip27/Makefile b/arch/mips/sgi-ip27/Makefile
index e0a6871d56e4..31f4931b8484 100644
--- a/arch/mips/sgi-ip27/Makefile
+++ b/arch/mips/sgi-ip27/Makefile
@@ -7,7 +7,6 @@ obj-y	:= ip27-berr.o ip27-irq.o ip27-init.o ip27-klconfig.o ip27-klnuma.o \
            ip27-xtalk.o
 
 obj-$(CONFIG_EARLY_PRINTK)      += ip27-console.o
-obj-$(CONFIG_KGDB)              += ip27-dbgio.o
 obj-$(CONFIG_SMP)               += ip27-smp.o
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/sgi-ip27/ip27-dbgio.c b/arch/mips/sgi-ip27/ip27-dbgio.c
deleted file mode 100644
index 08fd88b36f80..000000000000
--- a/arch/mips/sgi-ip27/ip27-dbgio.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Copyright 2004 Ralf Baechle <ralf@linux-mips.org>
- */
-#include <asm/sn/addrs.h>
-#include <asm/sn/sn0/hub.h>
-#include <asm/sn/klconfig.h>
-#include <asm/sn/ioc3.h>
-#include <asm/sn/sn_private.h>
-
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/serial_reg.h>
-
-#define IOC3_CLK        (22000000 / 3)
-#define IOC3_FLAGS      (0)
-
-static inline struct ioc3_uartregs *console_uart(void)
-{
-        struct ioc3 *ioc3;
-
-        ioc3 = (struct ioc3 *)KL_CONFIG_CH_CONS_INFO(get_nasid())->memory_base;
-
-        return &ioc3->sregs.uarta;
-}
-
-unsigned char getDebugChar(void)
-{
-        struct ioc3_uartregs *uart = console_uart();
-
-        while ((uart->iu_lsr & UART_LSR_DR) == 0);
-        return uart->iu_rbr;
-}
-
-void putDebugChar(unsigned char c)
-{
-        struct ioc3_uartregs *uart = console_uart();
-
-        while ((uart->iu_lsr & UART_LSR_THRE) == 0);
-        uart->iu_thr = c;
-}
diff --git a/arch/mips/sibyte/bcm1480/irq.c b/arch/mips/sibyte/bcm1480/irq.c
index db372a0f106d..a35818ed4263 100644
--- a/arch/mips/sibyte/bcm1480/irq.c
+++ b/arch/mips/sibyte/bcm1480/irq.c
@@ -57,30 +57,6 @@ static void bcm1480_set_affinity(unsigned int irq, cpumask_t mask);
 extern unsigned long ht_eoi_space;
 #endif
 
-#ifdef CONFIG_KGDB
-#include <asm/gdb-stub.h>
-extern void breakpoint(void);
-static int kgdb_irq;
-#ifdef CONFIG_GDB_CONSOLE
-extern void register_gdb_console(void);
-#endif
-
-/* kgdb is on when configured.  Pass "nokgdb" kernel arg to turn it off */
-static int kgdb_flag = 1;
-static int __init nokgdb(char *str)
-{
-        kgdb_flag = 0;
-        return 1;
-}
-__setup("nokgdb", nokgdb);
-
-/* Default to UART1 */
-int kgdb_port = 1;
-#ifdef CONFIG_SERIAL_SB1250_DUART
-extern char sb1250_duart_present[];
-#endif
-#endif
-
 static struct irq_chip bcm1480_irq_type = {
         .name = "BCM1480-IMR",
         .ack = ack_bcm1480_irq,
@@ -355,61 +331,10 @@ void __init arch_init_irq(void)
          * does its own management of IP7.
          */
 
-#ifdef CONFIG_KGDB
-        imask |= STATUSF_IP6;
-#endif
         /* Enable necessary IPs, disable the rest */
         change_c0_status(ST0_IM, imask);
-
-#ifdef CONFIG_KGDB
-        if (kgdb_flag) {
-                kgdb_irq = K_BCM1480_INT_UART_0 + kgdb_port;
-
-#ifdef CONFIG_SERIAL_SB1250_DUART
-                sb1250_duart_present[kgdb_port] = 0;
-#endif
-                /* Setup uart 1 settings, mapper */
-                /* QQQ FIXME */
-                __raw_writeq(M_DUART_IMR_BRK, IOADDR(A_DUART_IMRREG(kgdb_port)));
-
-                __raw_writeq(IMR_IP6_VAL,
-                             IOADDR(A_BCM1480_IMR_REGISTER(0, R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) +
-                             (kgdb_irq << 3)));
-                bcm1480_unmask_irq(0, kgdb_irq);
-
-#ifdef CONFIG_GDB_CONSOLE
-                register_gdb_console();
-#endif
-                printk("Waiting for GDB on UART port %d\n", kgdb_port);
-                set_debug_traps();
-                breakpoint();
-        }
-#endif
-}
-
-#ifdef CONFIG_KGDB
-
-#include <linux/delay.h>
-
-#define duart_out(reg, val)     csr_out32(val, IOADDR(A_DUART_CHANREG(kgdb_port, reg)))
-#define duart_in(reg)           csr_in32(IOADDR(A_DUART_CHANREG(kgdb_port, reg)))
-
-static void bcm1480_kgdb_interrupt(void)
-{
-        /*
-         * Clear break-change status (allow some time for the remote
-         * host to stop the break, since we would see another
-         * interrupt on the end-of-break too)
-         */
-        kstat.irqs[smp_processor_id()][kgdb_irq]++;
-        mdelay(500);
-        duart_out(R_DUART_CMD, V_DUART_MISC_CMD_RESET_BREAK_INT |
-                                M_DUART_RX_EN | M_DUART_TX_EN);
-        set_async_breakpoint(&get_irq_regs()->cp0_epc);
 }
 
-#endif  /* CONFIG_KGDB */
-
 extern void bcm1480_mailbox_interrupt(void);
 
 static inline void dispatch_ip2(void)
@@ -462,11 +387,6 @@ asmlinkage void plat_irq_dispatch(void)
                 bcm1480_mailbox_interrupt();
 #endif
 
-#ifdef CONFIG_KGDB
-        else if (pending & CAUSEF_IP6)
-                bcm1480_kgdb_interrupt();               /* KGDB (uart 1) */
-#endif
-
         else if (pending & CAUSEF_IP2)
                 dispatch_ip2();
 }
diff --git a/arch/mips/sibyte/cfe/setup.c b/arch/mips/sibyte/cfe/setup.c
index fd9604d5555a..3de30f79db3f 100644
--- a/arch/mips/sibyte/cfe/setup.c
+++ b/arch/mips/sibyte/cfe/setup.c
@@ -59,10 +59,6 @@ int cfe_cons_handle;
 extern unsigned long initrd_start, initrd_end;
 #endif
 
-#ifdef CONFIG_KGDB
-extern int kgdb_port;
-#endif
-
 static void __noreturn cfe_linux_exit(void *arg)
 {
         int warm = *(int *)arg;
@@ -246,9 +242,6 @@ void __init prom_init(void)
         int argc = fw_arg0;
         char **envp = (char **) fw_arg2;
         int *prom_vec = (int *) fw_arg3;
-#ifdef CONFIG_KGDB
-        char *arg;
-#endif
 
         _machine_restart   = cfe_linux_restart;
         _machine_halt      = cfe_linux_halt;
@@ -309,13 +302,6 @@ void __init prom_init(void)
                 }
         }
 
-#ifdef CONFIG_KGDB
-        if ((arg = strstr(arcs_cmdline, "kgdb=duart")) != NULL)
-                kgdb_port = (arg[10] == '0') ? 0 : 1;
-        else
-                kgdb_port = 1;
-#endif
-
 #ifdef CONFIG_BLK_DEV_INITRD
         {
                 char *ptr;
diff --git a/arch/mips/sibyte/sb1250/irq.c b/arch/mips/sibyte/sb1250/irq.c
index eac9065ffe0c..a5158483986e 100644
--- a/arch/mips/sibyte/sb1250/irq.c
+++ b/arch/mips/sibyte/sb1250/irq.c
@@ -57,16 +57,6 @@ static void sb1250_set_affinity(unsigned int irq, cpumask_t mask);
 extern unsigned long ldt_eoi_space;
 #endif
 
-#ifdef CONFIG_KGDB
-static int kgdb_irq;
-
-/* Default to UART1 */
-int kgdb_port = 1;
-#ifdef CONFIG_SERIAL_SB1250_DUART
-extern char sb1250_duart_present[];
-#endif
-#endif
-
 static struct irq_chip sb1250_irq_type = {
         .name = "SB1250-IMR",
         .ack = ack_sb1250_irq,
@@ -313,55 +303,10 @@ void __init arch_init_irq(void)
          * does its own management of IP7.
          */
 
-#ifdef CONFIG_KGDB
-        imask |= STATUSF_IP6;
-#endif
         /* Enable necessary IPs, disable the rest */
         change_c0_status(ST0_IM, imask);
-
-#ifdef CONFIG_KGDB
-        if (kgdb_flag) {
-                kgdb_irq = K_INT_UART_0 + kgdb_port;
-
-#ifdef CONFIG_SERIAL_SB1250_DUART
-                sb1250_duart_present[kgdb_port] = 0;
-#endif
-                /* Setup uart 1 settings, mapper */
-                __raw_writeq(M_DUART_IMR_BRK,
-                             IOADDR(A_DUART_IMRREG(kgdb_port)));
-
-                __raw_writeq(IMR_IP6_VAL,
-                             IOADDR(A_IMR_REGISTER(0,
-                                                   R_IMR_INTERRUPT_MAP_BASE) +
-                                    (kgdb_irq << 3)));
-                sb1250_unmask_irq(0, kgdb_irq);
-        }
-#endif
-}
-
-#ifdef CONFIG_KGDB
-
-#include <linux/delay.h>
-
-#define duart_out(reg, val)     csr_out32(val, IOADDR(A_DUART_CHANREG(kgdb_port, reg)))
-#define duart_in(reg)           csr_in32(IOADDR(A_DUART_CHANREG(kgdb_port, reg)))
-
-static void sb1250_kgdb_interrupt(void)
-{
-        /*
-         * Clear break-change status (allow some time for the remote
-         * host to stop the break, since we would see another
-         * interrupt on the end-of-break too)
-         */
-        kstat_this_cpu.irqs[kgdb_irq]++;
-        mdelay(500);
-        duart_out(R_DUART_CMD, V_DUART_MISC_CMD_RESET_BREAK_INT |
-                                M_DUART_RX_EN | M_DUART_TX_EN);
-        set_async_breakpoint(&get_irq_regs()->cp0_epc);
 }
 
-#endif  /* CONFIG_KGDB */
-
 extern void sb1250_mailbox_interrupt(void);
 
 static inline void dispatch_ip2(void)
@@ -407,11 +352,6 @@ asmlinkage void plat_irq_dispatch(void)
                 sb1250_mailbox_interrupt();
 #endif
 
-#ifdef CONFIG_KGDB
-        else if (pending & CAUSEF_IP6)                  /* KGDB (uart 1) */
-                sb1250_kgdb_interrupt();
-#endif
-
         else if (pending & CAUSEF_IP2)
                 dispatch_ip2();
         else
diff --git a/arch/mips/sibyte/swarm/Makefile b/arch/mips/sibyte/swarm/Makefile
index 255d692bfa18..f18ba9201bbc 100644
--- a/arch/mips/sibyte/swarm/Makefile
+++ b/arch/mips/sibyte/swarm/Makefile
@@ -1,4 +1,3 @@
 obj-y                           := setup.o rtc_xicor1241.o rtc_m41t81.o
 
 obj-$(CONFIG_I2C_BOARDINFO)     += swarm-i2c.o
-obj-$(CONFIG_KGDB)              += dbg_io.o
diff --git a/arch/mips/sibyte/swarm/dbg_io.c b/arch/mips/sibyte/swarm/dbg_io.c
deleted file mode 100644
index b97ae3048482..000000000000
--- a/arch/mips/sibyte/swarm/dbg_io.c
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * kgdb debug routines for SiByte boards.
- *
- * Copyright (C) 2001 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-/* -------------------- BEGINNING OF CONFIG --------------------- */
-
-#include <linux/delay.h>
-#include <asm/io.h>
-#include <asm/sibyte/sb1250.h>
-#include <asm/sibyte/sb1250_regs.h>
-#include <asm/sibyte/sb1250_uart.h>
-#include <asm/sibyte/sb1250_int.h>
-#include <asm/addrspace.h>
-
-/*
- * We use the second serial port for kgdb traffic.
- *      115200, 8, N, 1.
- */
-
-#define BAUD_RATE               115200
-#define CLK_DIVISOR             V_DUART_BAUD_RATE(BAUD_RATE)
-#define DATA_BITS               V_DUART_BITS_PER_CHAR_8         /* or 7    */
-#define PARITY                  V_DUART_PARITY_MODE_NONE        /* or even */
-#define STOP_BITS               M_DUART_STOP_BIT_LEN_1          /* or 2    */
-
-static int duart_initialized = 0;       /* 0: need to be init'ed by kgdb */
-
-/* -------------------- END OF CONFIG --------------------- */
-extern int kgdb_port;
-
-#define duart_out(reg, val)     csr_out32(val, IOADDR(A_DUART_CHANREG(kgdb_port, reg)))
-#define duart_in(reg)           csr_in32(IOADDR(A_DUART_CHANREG(kgdb_port, reg)))
-
-void putDebugChar(unsigned char c);
-unsigned char getDebugChar(void);
-static void
-duart_init(int clk_divisor, int data, int parity, int stop)
-{
-        duart_out(R_DUART_MODE_REG_1, data | parity);
-        duart_out(R_DUART_MODE_REG_2, stop);
-        duart_out(R_DUART_CLK_SEL, clk_divisor);
-
-        duart_out(R_DUART_CMD, M_DUART_RX_EN | M_DUART_TX_EN);  /* enable rx and tx */
-}
-
-void
-putDebugChar(unsigned char c)
-{
-        if (!duart_initialized) {
-                duart_initialized = 1;
-                duart_init(CLK_DIVISOR, DATA_BITS, PARITY, STOP_BITS);
-        }
-        while ((duart_in(R_DUART_STATUS) & M_DUART_TX_RDY) == 0);
-        duart_out(R_DUART_TX_HOLD, c);
-}
-
-unsigned char
-getDebugChar(void)
-{
-        if (!duart_initialized) {
-                duart_initialized = 1;
-                duart_init(CLK_DIVISOR, DATA_BITS, PARITY, STOP_BITS);
-        }
-        while ((duart_in(R_DUART_STATUS) & M_DUART_RX_RDY) == 0) ;
-        return duart_in(R_DUART_RX_HOLD);
-}
-
diff --git a/arch/mips/txx9/Kconfig b/arch/mips/txx9/Kconfig
index 6de4c5aa92be..840fe757c48d 100644
--- a/arch/mips/txx9/Kconfig
+++ b/arch/mips/txx9/Kconfig
@@ -1,3 +1,27 @@
+config MACH_TX39XX
+        bool
+        select MACH_TXX9
+        select SYS_HAS_CPU_TX39XX
+
+config MACH_TX49XX
+        bool
+        select MACH_TXX9
+        select CEVT_R4K
+        select CSRC_R4K
+        select IRQ_CPU
+        select SYS_HAS_CPU_TX49XX
+        select SYS_SUPPORTS_64BIT_KERNEL
+
+config MACH_TXX9
+        bool
+        select DMA_NONCOHERENT
+        select SWAP_IO_SPACE
+        select SYS_HAS_EARLY_PRINTK
+        select SYS_SUPPORTS_32BIT_KERNEL
+        select SYS_SUPPORTS_LITTLE_ENDIAN
+        select SYS_SUPPORTS_BIG_ENDIAN
+        select GENERIC_HARDIRQS_NO__DO_IRQ
+
 config TOSHIBA_JMR3927
         bool "Toshiba JMR-TX3927 board"
         depends on MACH_TX39XX
@@ -24,68 +48,37 @@ config TOSHIBA_RBTX4938
 config SOC_TX3927
         bool
         select CEVT_TXX9
-        select DMA_NONCOHERENT
         select HAS_TXX9_SERIAL
         select HW_HAS_PCI
         select IRQ_TXX9
-        select SWAP_IO_SPACE
-        select SYS_HAS_CPU_TX39XX
-        select SYS_SUPPORTS_32BIT_KERNEL
-        select SYS_SUPPORTS_LITTLE_ENDIAN
-        select SYS_SUPPORTS_BIG_ENDIAN
-        select GENERIC_HARDIRQS_NO__DO_IRQ
         select GPIO_TXX9
 
 config SOC_TX4927
         bool
-        select CEVT_R4K
-        select CSRC_R4K
         select CEVT_TXX9
-        select DMA_NONCOHERENT
         select HAS_TXX9_SERIAL
         select HW_HAS_PCI
-        select IRQ_CPU
         select IRQ_TXX9
         select PCI_TX4927
-        select SWAP_IO_SPACE
-        select SYS_HAS_CPU_TX49XX
-        select SYS_SUPPORTS_32BIT_KERNEL
-        select SYS_SUPPORTS_64BIT_KERNEL
-        select SYS_SUPPORTS_LITTLE_ENDIAN
-        select SYS_SUPPORTS_BIG_ENDIAN
-        select SYS_SUPPORTS_KGDB
-        select GENERIC_HARDIRQS_NO__DO_IRQ
         select GPIO_TXX9
 
 config SOC_TX4938
         bool
-        select CEVT_R4K
-        select CSRC_R4K
         select CEVT_TXX9
-        select DMA_NONCOHERENT
         select HAS_TXX9_SERIAL
         select HW_HAS_PCI
-        select IRQ_CPU
         select IRQ_TXX9
         select PCI_TX4927
-        select SWAP_IO_SPACE
-        select SYS_HAS_CPU_TX49XX
-        select SYS_SUPPORTS_32BIT_KERNEL
-        select SYS_SUPPORTS_64BIT_KERNEL
-        select SYS_SUPPORTS_LITTLE_ENDIAN
-        select SYS_SUPPORTS_BIG_ENDIAN
-        select SYS_SUPPORTS_KGDB
-        select GENERIC_HARDIRQS_NO__DO_IRQ
         select GPIO_TXX9
 
 config TOSHIBA_FPCIB0
         bool "FPCIB0 Backplane Support"
-        depends on PCI && (MACH_TX39XX || MACH_TX49XX)
+        depends on PCI && MACH_TXX9
         select I8259
 
 config PICMG_PCI_BACKPLANE_DEFAULT
         bool "Support for PICMG PCI Backplane"
-        depends on PCI && (MACH_TX39XX || MACH_TX49XX)
+        depends on PCI && MACH_TXX9
         default y if !TOSHIBA_FPCIB0
 
 if TOSHIBA_RBTX4938
diff --git a/arch/mips/txx9/generic/Makefile b/arch/mips/txx9/generic/Makefile
index 9c120771e65f..9bb34af26b73 100644
--- a/arch/mips/txx9/generic/Makefile
+++ b/arch/mips/txx9/generic/Makefile
@@ -4,9 +4,9 @@
 
 obj-y   += setup.o
 obj-$(CONFIG_PCI)       += pci.o
+obj-$(CONFIG_SOC_TX3927)        += setup_tx3927.o irq_tx3927.o
 obj-$(CONFIG_SOC_TX4927)        += mem_tx4927.o setup_tx4927.o irq_tx4927.o
 obj-$(CONFIG_SOC_TX4938)        += mem_tx4927.o setup_tx4938.o irq_tx4938.o
 obj-$(CONFIG_TOSHIBA_FPCIB0)    += smsc_fdc37m81x.o
-obj-$(CONFIG_KGDB)      += dbgio.o
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/txx9/generic/dbgio.c b/arch/mips/txx9/generic/dbgio.c
deleted file mode 100644
index 33b9c672a322..000000000000
--- a/arch/mips/txx9/generic/dbgio.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * linux/arch/mips/tx4938/common/dbgio.c
- *
- * kgdb interface for gdb
- *
- * Author: MontaVista Software, Inc.
- *         source@mvista.com
- *
- * Copyright 2005 MontaVista Software Inc.
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License as published by the
- *  Free Software Foundation; either version 2 of the License, or (at your
- *  option) any later version.
- *
- *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- *  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- *  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- *  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
- *  TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
- *  USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Support for TX4938 in 2.6 - Hiroshi DOYU <Hiroshi_DOYU@montavista.co.jp>
- */
-
-#include <linux/types>
-
-extern u8 txx9_sio_kdbg_rd(void);
-extern int txx9_sio_kdbg_wr( u8 ch );
-
-u8 getDebugChar(void)
-{
-        return (txx9_sio_kdbg_rd());
-}
-
-int putDebugChar(u8 byte)
-{
-        return (txx9_sio_kdbg_wr(byte));
-}
-
diff --git a/arch/mips/txx9/generic/irq_tx3927.c b/arch/mips/txx9/generic/irq_tx3927.c
new file mode 100644
index 000000000000..c683f593eda2
--- /dev/null
+++ b/arch/mips/txx9/generic/irq_tx3927.c
@@ -0,0 +1,25 @@
+/*
+ * Common tx3927 irq handler
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ */
+#include <linux/init.h>
+#include <asm/txx9irq.h>
+#include <asm/txx9/tx3927.h>
+
+void __init tx3927_irq_init(void)
+{
+        int i;
+
+        txx9_irq_init(TX3927_IRC_REG);
+        /* raise priority for timers, sio */
+        for (i = 0; i < TX3927_NR_TMR; i++)
+                txx9_irq_set_pri(TX3927_IR_TMR(i), 6);
+        for (i = 0; i < TX3927_NR_SIO; i++)
+                txx9_irq_set_pri(TX3927_IR_SIO(i), 7);
+}
diff --git a/arch/mips/txx9/generic/pci.c b/arch/mips/txx9/generic/pci.c
index 0b92d8c13208..7b637a7c0e66 100644
--- a/arch/mips/txx9/generic/pci.c
+++ b/arch/mips/txx9/generic/pci.c
@@ -386,3 +386,39 @@ int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
         return txx9_board_vec->pci_map_irq(dev, slot, pin);
 }
+
+char * (*txx9_board_pcibios_setup)(char *str) __devinitdata;
+
+char *__devinit txx9_pcibios_setup(char *str)
+{
+        if (txx9_board_pcibios_setup && !txx9_board_pcibios_setup(str))
+                return NULL;
+        if (!strcmp(str, "picmg")) {
+                /* PICMG compliant backplane (TOSHIBA JMB-PICMG-ATX
+                   (5V or 3.3V), JMB-PICMG-L2 (5V only), etc.) */
+                txx9_pci_option |= TXX9_PCI_OPT_PICMG;
+                return NULL;
+        } else if (!strcmp(str, "nopicmg")) {
+                /* non-PICMG compliant backplane (TOSHIBA
+                   RBHBK4100,RBHBK4200, Interface PCM-PCM05, etc.) */
+                txx9_pci_option &= ~TXX9_PCI_OPT_PICMG;
+                return NULL;
+        } else if (!strncmp(str, "clk=", 4)) {
+                char *val = str + 4;
+                txx9_pci_option &= ~TXX9_PCI_OPT_CLK_MASK;
+                if (strcmp(val, "33") == 0)
+                        txx9_pci_option |= TXX9_PCI_OPT_CLK_33;
+                else if (strcmp(val, "66") == 0)
+                        txx9_pci_option |= TXX9_PCI_OPT_CLK_66;
+                else /* "auto" */
+                        txx9_pci_option |= TXX9_PCI_OPT_CLK_AUTO;
+                return NULL;
+        } else if (!strncmp(str, "err=", 4)) {
+                if (!strcmp(str + 4, "panic"))
+                        txx9_pci_err_action = TXX9_PCI_ERR_PANIC;
+                else if (!strcmp(str + 4, "ignore"))
+                        txx9_pci_err_action = TXX9_PCI_ERR_IGNORE;
+                return NULL;
+        }
+        return str;
+}
diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c
index 8c60c78b9a9e..1bc57d0f4c5c 100644
--- a/arch/mips/txx9/generic/setup.c
+++ b/arch/mips/txx9/generic/setup.c
@@ -20,9 +20,13 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
 #include <asm/bootinfo.h>
 #include <asm/time.h>
+#include <asm/reboot.h>
 #include <asm/txx9/generic.h>
+#include <asm/txx9/pci.h>
 #ifdef CONFIG_CPU_TX49XX
 #include <asm/txx9/tx4938.h>
 #endif
@@ -187,6 +191,117 @@ char * __init prom_getcmdline(void)
         return &(arcs_cmdline[0]);
 }
 
+static void __noreturn txx9_machine_halt(void)
+{
+        local_irq_disable();
+        clear_c0_status(ST0_IM);
+        while (1) {
+                if (cpu_wait) {
+                        (*cpu_wait)();
+                        if (cpu_has_counter) {
+                                /*
+                                 * Clear counter interrupt while it
+                                 * breaks WAIT instruction even if
+                                 * masked.
+                                 */
+                                write_c0_compare(0);
+                        }
+                }
+        }
+}
+
+/* Watchdog support */
+void __init txx9_wdt_init(unsigned long base)
+{
+        struct resource res = {
+                .start  = base,
+                .end    = base + 0x100 - 1,
+                .flags  = IORESOURCE_MEM,
+        };
+        platform_device_register_simple("txx9wdt", -1, &res, 1);
+}
+
+/* SPI support */
+void __init txx9_spi_init(int busid, unsigned long base, int irq)
+{
+        struct resource res[] = {
+                {
+                        .start  = base,
+                        .end    = base + 0x20 - 1,
+                        .flags  = IORESOURCE_MEM,
+                }, {
+                        .start  = irq,
+                        .flags  = IORESOURCE_IRQ,
+                },
+        };
+        platform_device_register_simple("spi_txx9", busid,
+                                        res, ARRAY_SIZE(res));
+}
+
+void __init txx9_ethaddr_init(unsigned int id, unsigned char *ethaddr)
+{
+        struct platform_device *pdev =
+                platform_device_alloc("tc35815-mac", id);
+        if (!pdev ||
+            platform_device_add_data(pdev, ethaddr, 6) ||
+            platform_device_add(pdev))
+                platform_device_put(pdev);
+}
+
+void __init txx9_sio_init(unsigned long baseaddr, int irq,
+                          unsigned int line, unsigned int sclk, int nocts)
+{
+#ifdef CONFIG_SERIAL_TXX9
+        struct uart_port req;
+
+        memset(&req, 0, sizeof(req));
+        req.line = line;
+        req.iotype = UPIO_MEM;
+        req.membase = ioremap(baseaddr, 0x24);
+        req.mapbase = baseaddr;
+        req.irq = irq;
+        if (!nocts)
+                req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
+        if (sclk) {
+                req.flags |= UPF_MAGIC_MULTIPLIER /*USE_SCLK*/;
+                req.uartclk = sclk;
+        } else
+                req.uartclk = TXX9_IMCLK;
+        early_serial_txx9_setup(&req);
+#endif /* CONFIG_SERIAL_TXX9 */
+}
+
+#ifdef CONFIG_EARLY_PRINTK
+static void __init null_prom_putchar(char c)
+{
+}
+void (*txx9_prom_putchar)(char c) __initdata = null_prom_putchar;
+
+void __init prom_putchar(char c)
+{
+        txx9_prom_putchar(c);
+}
+
+static void __iomem *early_txx9_sio_port;
+
+static void __init early_txx9_sio_putchar(char c)
+{
+#define TXX9_SICISR     0x0c
+#define TXX9_SITFIFO    0x1c
+#define TXX9_SICISR_TXALS       0x00000002
+        while (!(__raw_readl(early_txx9_sio_port + TXX9_SICISR) &
+                 TXX9_SICISR_TXALS))
+                ;
+        __raw_writel(c, early_txx9_sio_port + TXX9_SITFIFO);
+}
+
+void __init txx9_sio_putchar_init(unsigned long baseaddr)
+{
+        early_txx9_sio_port = ioremap(baseaddr, 0x24);
+        txx9_prom_putchar = early_txx9_sio_putchar;
+}
+#endif /* CONFIG_EARLY_PRINTK */
+
 /* wrappers */
 void __init plat_mem_setup(void)
 {
@@ -194,6 +309,15 @@ void __init plat_mem_setup(void)
         ioport_resource.end = ~0UL;     /* no limit */
         iomem_resource.start = 0;
         iomem_resource.end = ~0UL;      /* no limit */
+
+        /* fallback restart/halt routines */
+        _machine_restart = (void (*)(char *))txx9_machine_halt;
+        _machine_halt = txx9_machine_halt;
+        pm_power_off = txx9_machine_halt;
+
+#ifdef CONFIG_PCI
+        pcibios_plat_setup = txx9_pcibios_setup;
+#endif
         txx9_board_vec->mem_setup();
 }
 
diff --git a/arch/mips/txx9/generic/setup_tx3927.c b/arch/mips/txx9/generic/setup_tx3927.c
new file mode 100644
index 000000000000..7bd963d37fc3
--- /dev/null
+++ b/arch/mips/txx9/generic/setup_tx3927.c
@@ -0,0 +1,130 @@
+/*
+ * TX3927 setup routines
+ * Based on linux/arch/mips/txx9/jmr3927/setup.c
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org)
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/param.h>
+#include <linux/io.h>
+#include <asm/mipsregs.h>
+#include <asm/txx9irq.h>
+#include <asm/txx9tmr.h>
+#include <asm/txx9pio.h>
+#include <asm/txx9/generic.h>
+#include <asm/txx9/tx3927.h>
+
+void __init tx3927_wdt_init(void)
+{
+        txx9_wdt_init(TX3927_TMR_REG(2));
+}
+
+void __init tx3927_setup(void)
+{
+        int i;
+        unsigned int conf;
+
+        /* don't enable - see errata */
+        txx9_ccfg_toeon = 0;
+        if (strstr(prom_getcmdline(), "toeon") != NULL)
+                txx9_ccfg_toeon = 1;
+
+        txx9_reg_res_init(TX3927_REV_PCODE(), TX3927_REG_BASE,
+                          TX3927_REG_SIZE);
+
+        /* SDRAMC,ROMC are configured by PROM */
+        for (i = 0; i < 8; i++) {
+                if (!(tx3927_romcptr->cr[i] & 0x8))
+                        continue;       /* disabled */
+                txx9_ce_res[i].start = (unsigned long)TX3927_ROMC_BA(i);
+                txx9_ce_res[i].end =
+                        txx9_ce_res[i].start + TX3927_ROMC_SIZE(i) - 1;
+                request_resource(&iomem_resource, &txx9_ce_res[i]);
+        }
+
+        /* clocks */
+        txx9_gbus_clock = txx9_cpu_clock / 2;
+        /* change default value to udelay/mdelay take reasonable time */
+        loops_per_jiffy = txx9_cpu_clock / HZ / 2;
+
+        /* CCFG */
+        /* enable Timeout BusError */
+        if (txx9_ccfg_toeon)
+                tx3927_ccfgptr->ccfg |= TX3927_CCFG_TOE;
+
+        /* clear BusErrorOnWrite flag */
+        tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_BEOW;
+        if (read_c0_conf() & TX39_CONF_WBON)
+                /* Disable PCI snoop */
+                tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_PSNP;
+        else
+                /* Enable PCI SNOOP - with write through only */
+                tx3927_ccfgptr->ccfg |= TX3927_CCFG_PSNP;
+        /* do reset on watchdog */
+        tx3927_ccfgptr->ccfg |= TX3927_CCFG_WR;
+
+        printk(KERN_INFO "TX3927 -- CRIR:%08lx CCFG:%08lx PCFG:%08lx\n",
+               tx3927_ccfgptr->crir,
+               tx3927_ccfgptr->ccfg, tx3927_ccfgptr->pcfg);
+
+        /* TMR */
+        for (i = 0; i < TX3927_NR_TMR; i++)
+                txx9_tmr_init(TX3927_TMR_REG(i));
+
+        /* DMA */
+        tx3927_dmaptr->mcr = 0;
+        for (i = 0; i < ARRAY_SIZE(tx3927_dmaptr->ch); i++) {
+                /* reset channel */
+                tx3927_dmaptr->ch[i].ccr = TX3927_DMA_CCR_CHRST;
+                tx3927_dmaptr->ch[i].ccr = 0;
+        }
+        /* enable DMA */
+#ifdef __BIG_ENDIAN
+        tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN;
+#else
+        tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN | TX3927_DMA_MCR_LE;
+#endif
+
+        /* PIO */
+        __raw_writel(0, &tx3927_pioptr->maskcpu);
+        __raw_writel(0, &tx3927_pioptr->maskext);
+        txx9_gpio_init(TX3927_PIO_REG, 0, 16);
+
+        conf = read_c0_conf();
+        if (!(conf & TX39_CONF_ICE))
+                printk(KERN_INFO "TX3927 I-Cache disabled.\n");
+        if (!(conf & TX39_CONF_DCE))
+                printk(KERN_INFO "TX3927 D-Cache disabled.\n");
+        else if (!(conf & TX39_CONF_WBON))
+                printk(KERN_INFO "TX3927 D-Cache WriteThrough.\n");
+        else if (!(conf & TX39_CONF_CWFON))
+                printk(KERN_INFO "TX3927 D-Cache WriteBack.\n");
+        else
+                printk(KERN_INFO "TX3927 D-Cache WriteBack (CWF) .\n");
+}
+
+void __init tx3927_time_init(unsigned int evt_tmrnr, unsigned int src_tmrnr)
+{
+        txx9_clockevent_init(TX3927_TMR_REG(evt_tmrnr),
+                             TXX9_IRQ_BASE + TX3927_IR_TMR(evt_tmrnr),
+                             TXX9_IMCLK);
+        txx9_clocksource_init(TX3927_TMR_REG(src_tmrnr), TXX9_IMCLK);
+}
+
+void __init tx3927_sio_init(unsigned int sclk, unsigned int cts_mask)
+{
+        int i;
+
+        for (i = 0; i < 2; i++)
+                txx9_sio_init(TX3927_SIO_REG(i),
+                              TXX9_IRQ_BASE + TX3927_IR_SIO(i),
+                              i, sclk, (1 << i) & cts_mask);
+}
diff --git a/arch/mips/txx9/generic/setup_tx4927.c b/arch/mips/txx9/generic/setup_tx4927.c
index 89d6e28add93..f80d4b7a694d 100644
--- a/arch/mips/txx9/generic/setup_tx4927.c
+++ b/arch/mips/txx9/generic/setup_tx4927.c
@@ -13,7 +13,6 @@
 #include <linux/init.h>
 #include <linux/ioport.h>
 #include <linux/delay.h>
-#include <linux/serial_core.h>
 #include <linux/param.h>
 #include <asm/txx9irq.h>
 #include <asm/txx9tmr.h>
@@ -21,7 +20,7 @@
 #include <asm/txx9/generic.h>
 #include <asm/txx9/tx4927.h>
 
-void __init tx4927_wdr_init(void)
+static void __init tx4927_wdr_init(void)
 {
         /* clear WatchDogReset (W1C) */
         tx4927_ccfg_set(TX4927_CCFG_WDRST);
@@ -29,6 +28,11 @@ void __init tx4927_wdr_init(void)
         tx4927_ccfg_set(TX4927_CCFG_WR);
 }
 
+void __init tx4927_wdt_init(void)
+{
+        txx9_wdt_init(TX4927_TMR_REG(2) & 0xfffffffffULL);
+}
+
 static struct resource tx4927_sdram_resource[4];
 
 void __init tx4927_setup(void)
@@ -173,22 +177,12 @@ void __init tx4927_time_init(unsigned int tmrnr)
                                      TXX9_IMCLK);
 }
 
-void __init tx4927_setup_serial(void)
+void __init tx4927_sio_init(unsigned int sclk, unsigned int cts_mask)
 {
-#ifdef CONFIG_SERIAL_TXX9
         int i;
-        struct uart_port req;
-
-        for (i = 0; i < 2; i++) {
-                memset(&req, 0, sizeof(req));
-                req.line = i;
-                req.iotype = UPIO_MEM;
-                req.membase = (unsigned char __iomem *)TX4927_SIO_REG(i);
-                req.mapbase = TX4927_SIO_REG(i) & 0xfffffffffULL;
-                req.irq = TXX9_IRQ_BASE + TX4927_IR_SIO(i);
-                req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
-                req.uartclk = TXX9_IMCLK;
-                early_serial_txx9_setup(&req);
-        }
-#endif /* CONFIG_SERIAL_TXX9 */
+
+        for (i = 0; i < 2; i++)
+                txx9_sio_init(TX4927_SIO_REG(i) & 0xfffffffffULL,
+                              TXX9_IRQ_BASE + TX4927_IR_SIO(i),
+                              i, sclk, (1 << i) & cts_mask);
 }
diff --git a/arch/mips/txx9/generic/setup_tx4938.c b/arch/mips/txx9/generic/setup_tx4938.c
index 317378d8579d..f3040b9ba059 100644
--- a/arch/mips/txx9/generic/setup_tx4938.c
+++ b/arch/mips/txx9/generic/setup_tx4938.c
@@ -13,7 +13,6 @@
 #include <linux/init.h>
 #include <linux/ioport.h>
 #include <linux/delay.h>
-#include <linux/serial_core.h>
 #include <linux/param.h>
 #include <asm/txx9irq.h>
 #include <asm/txx9tmr.h>
@@ -21,7 +20,7 @@
 #include <asm/txx9/generic.h>
 #include <asm/txx9/tx4938.h>
 
-void __init tx4938_wdr_init(void)
+static void __init tx4938_wdr_init(void)
 {
         /* clear WatchDogReset (W1C) */
         tx4938_ccfg_set(TX4938_CCFG_WDRST);
@@ -29,6 +28,11 @@ void __init tx4938_wdr_init(void)
         tx4938_ccfg_set(TX4938_CCFG_WR);
 }
 
+void __init tx4938_wdt_init(void)
+{
+        txx9_wdt_init(TX4938_TMR_REG(2) & 0xfffffffffULL);
+}
+
 static struct resource tx4938_sdram_resource[4];
 static struct resource tx4938_sram_resource;
 
@@ -233,11 +237,9 @@ void __init tx4938_time_init(unsigned int tmrnr)
                                      TXX9_IMCLK);
 }
 
-void __init tx4938_setup_serial(void)
+void __init tx4938_sio_init(unsigned int sclk, unsigned int cts_mask)
 {
-#ifdef CONFIG_SERIAL_TXX9
         int i;
-        struct uart_port req;
         unsigned int ch_mask = 0;
 
         if (__raw_readq(&tx4938_ccfgptr->pcfg) & TX4938_PCFG_ETH0_SEL)
@@ -245,15 +247,24 @@ void __init tx4938_setup_serial(void)
         for (i = 0; i < 2; i++) {
                 if ((1 << i) & ch_mask)
                         continue;
-                memset(&req, 0, sizeof(req));
-                req.line = i;
-                req.iotype = UPIO_MEM;
-                req.membase = (unsigned char __iomem *)TX4938_SIO_REG(i);
-                req.mapbase = TX4938_SIO_REG(i) & 0xfffffffffULL;
-                req.irq = TXX9_IRQ_BASE + TX4938_IR_SIO(i);
-                req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
-                req.uartclk = TXX9_IMCLK;
-                early_serial_txx9_setup(&req);
+                txx9_sio_init(TX4938_SIO_REG(i) & 0xfffffffffULL,
+                              TXX9_IRQ_BASE + TX4938_IR_SIO(i),
+                              i, sclk, (1 << i) & cts_mask);
         }
-#endif /* CONFIG_SERIAL_TXX9 */
+}
+
+void __init tx4938_spi_init(int busid)
+{
+        txx9_spi_init(busid, TX4938_SPI_REG & 0xfffffffffULL,
+                      TXX9_IRQ_BASE + TX4938_IR_SPI);
+}
+
+void __init tx4938_ethaddr_init(unsigned char *addr0, unsigned char *addr1)
+{
+        u64 pcfg = __raw_readq(&tx4938_ccfgptr->pcfg);
+
+        if (addr0 && (pcfg & TX4938_PCFG_ETH0_SEL))
+                txx9_ethaddr_init(TXX9_IRQ_BASE + TX4938_IR_ETH0, addr0);
+        if (addr1 && (pcfg & TX4938_PCFG_ETH1_SEL))
+                txx9_ethaddr_init(TXX9_IRQ_BASE + TX4938_IR_ETH1, addr1);
 }
diff --git a/arch/mips/txx9/generic/smsc_fdc37m81x.c b/arch/mips/txx9/generic/smsc_fdc37m81x.c
index 69e487467fa5..a2b2d62d88e3 100644
--- a/arch/mips/txx9/generic/smsc_fdc37m81x.c
+++ b/arch/mips/txx9/generic/smsc_fdc37m81x.c
@@ -15,8 +15,6 @@
 #include <asm/io.h>
 #include <asm/txx9/smsc_fdc37m81x.h>
 
-#define DEBUG
-
 /* Common Registers */
 #define SMSC_FDC37M81X_CONFIG_INDEX  0x00
 #define SMSC_FDC37M81X_CONFIG_DATA   0x01
@@ -55,7 +53,7 @@
 #define SMSC_FDC37M81X_CONFIG_EXIT   0xaa
 #define SMSC_FDC37M81X_CHIP_ID       0x4d
 
-static unsigned long g_smsc_fdc37m81x_base = 0;
+static unsigned long g_smsc_fdc37m81x_base;
 
 static inline unsigned char smsc_fdc37m81x_rd(unsigned char index)
 {
@@ -107,7 +105,8 @@ unsigned long __init smsc_fdc37m81x_init(unsigned long port)
         u8 chip_id;
 
         if (g_smsc_fdc37m81x_base)
-                printk("smsc_fdc37m81x_init() stepping on old base=0x%0*lx\n",
+                printk(KERN_WARNING "%s: stepping on old base=0x%0*lx\n",
+                       __func__,
                        field, g_smsc_fdc37m81x_base);
 
         g_smsc_fdc37m81x_base = port;
@@ -118,7 +117,7 @@ unsigned long __init smsc_fdc37m81x_init(unsigned long port)
         if (chip_id == SMSC_FDC37M81X_CHIP_ID)
                 smsc_fdc37m81x_config_end();
         else {
-                printk("smsc_fdc37m81x_init() unknow chip id 0x%02x\n",
+                printk(KERN_WARNING "%s: unknow chip id 0x%02x\n", __func__,
                        chip_id);
                 g_smsc_fdc37m81x_base = 0;
         }
@@ -127,22 +126,23 @@ unsigned long __init smsc_fdc37m81x_init(unsigned long port)
 }
 
 #ifdef DEBUG
-void smsc_fdc37m81x_config_dump_one(char *key, u8 dev, u8 reg)
+static void smsc_fdc37m81x_config_dump_one(const char *key, u8 dev, u8 reg)
 {
-        printk("%s: dev=0x%02x reg=0x%02x val=0x%02x\n", key, dev, reg,
+        printk(KERN_INFO "%s: dev=0x%02x reg=0x%02x val=0x%02x\n",
+               key, dev, reg,
                smsc_fdc37m81x_rd(reg));
 }
 
 void smsc_fdc37m81x_config_dump(void)
 {
         u8 orig;
-        char *fname = "smsc_fdc37m81x_config_dump()";
+        const char *fname = __func__;
 
         smsc_fdc37m81x_config_beg();
 
         orig = smsc_fdc37m81x_rd(SMSC_FDC37M81X_DNUM);
 
-        printk("%s: common\n", fname);
+        printk(KERN_INFO "%s: common\n", fname);
         smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE,
                                        SMSC_FDC37M81X_DNUM);
         smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE,
@@ -154,7 +154,7 @@ void smsc_fdc37m81x_config_dump(void)
         smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE,
                                        SMSC_FDC37M81X_PMGT);
 
-        printk("%s: keyboard\n", fname);
+        printk(KERN_INFO "%s: keyboard\n", fname);
         smsc_dc37m81x_wr(SMSC_FDC37M81X_DNUM, SMSC_FDC37M81X_KBD);
         smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_KBD,
                                        SMSC_FDC37M81X_ACTIVE);
diff --git a/arch/mips/txx9/jmr3927/Makefile b/arch/mips/txx9/jmr3927/Makefile
index ba292c945669..20d61ac543e5 100644
--- a/arch/mips/txx9/jmr3927/Makefile
+++ b/arch/mips/txx9/jmr3927/Makefile
@@ -3,6 +3,5 @@
 #
 
 obj-y   += prom.o irq.o setup.o
-obj-$(CONFIG_KGDB)      += kgdb_io.o
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/txx9/jmr3927/irq.c b/arch/mips/txx9/jmr3927/irq.c
index 070c9a115e57..6ec626c9473f 100644
--- a/arch/mips/txx9/jmr3927/irq.c
+++ b/arch/mips/txx9/jmr3927/irq.c
@@ -30,15 +30,11 @@
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
 #include <linux/init.h>
-#include <linux/sched.h>
 #include <linux/types.h>
 #include <linux/interrupt.h>
 
 #include <asm/io.h>
 #include <asm/mipsregs.h>
-#include <asm/system.h>
-
-#include <asm/processor.h>
 #include <asm/txx9/generic.h>
 #include <asm/txx9/jmr3927.h>
 
@@ -46,13 +42,6 @@
 #error JMR3927_IRQ_END > NR_IRQS
 #endif
 
-static unsigned char irc_level[TX3927_NUM_IR] = {
-        5, 5, 5, 5, 5, 5,       /* INT[5:0] */
-        7, 7,                   /* SIO */
-        5, 5, 5, 0, 0,          /* DMA, PIO, PCI */
-        6, 6, 6                 /* TMR */
-};
-
 /*
  * CP0_STATUS is a thread's resource (saved/restored on context switch).
  * So disable_irq/enable_irq MUST handle IOC/IRC registers.
@@ -103,26 +92,18 @@ static int jmr3927_irq_dispatch(int pending)
         return irq;
 }
 
-#ifdef CONFIG_PCI
-static irqreturn_t jmr3927_pcierr_interrupt(int irq, void *dev_id)
-{
-        printk(KERN_WARNING "PCI error interrupt (irq 0x%x).\n", irq);
-        printk(KERN_WARNING "pcistat:%02x, lbstat:%04lx\n",
-               tx3927_pcicptr->pcistat, tx3927_pcicptr->lbstat);
-
-        return IRQ_HANDLED;
-}
-static struct irqaction pcierr_action = {
-        .handler = jmr3927_pcierr_interrupt,
-        .mask = CPU_MASK_NONE,
-        .name = "PCI error",
+static struct irq_chip jmr3927_irq_ioc = {
+        .name = "jmr3927_ioc",
+        .ack = mask_irq_ioc,
+        .mask = mask_irq_ioc,
+        .mask_ack = mask_irq_ioc,
+        .unmask = unmask_irq_ioc,
 };
-#endif
-
-static void __init jmr3927_irq_init(void);
 
 void __init jmr3927_irq_setup(void)
 {
+        int i;
+
         txx9_irq_dispatch = jmr3927_irq_dispatch;
         /* Now, interrupt control disabled, */
         /* all IRC interrupts are masked, */
@@ -138,34 +119,10 @@ void __init jmr3927_irq_setup(void)
         /* clear PCI Reset interrupts */
         jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
 
-        jmr3927_irq_init();
+        tx3927_irq_init();
+        for (i = JMR3927_IRQ_IOC; i < JMR3927_IRQ_IOC + JMR3927_NR_IRQ_IOC; i++)
+                set_irq_chip_and_handler(i, &jmr3927_irq_ioc, handle_level_irq);
 
         /* setup IOC interrupt 1 (PCI, MODEM) */
         set_irq_chained_handler(JMR3927_IRQ_IOCINT, handle_simple_irq);
-
-#ifdef CONFIG_PCI
-        setup_irq(JMR3927_IRQ_IRC_PCI, &pcierr_action);
-#endif
-
-        /* enable all CPU interrupt bits. */
-        set_c0_status(ST0_IM);  /* IE bit is still 0. */
-}
-
-static struct irq_chip jmr3927_irq_ioc = {
-        .name = "jmr3927_ioc",
-        .ack = mask_irq_ioc,
-        .mask = mask_irq_ioc,
-        .mask_ack = mask_irq_ioc,
-        .unmask = unmask_irq_ioc,
-};
-
-static void __init jmr3927_irq_init(void)
-{
-        u32 i;
-
-        txx9_irq_init(TX3927_IRC_REG);
-        for (i = 0; i < TXx9_MAX_IR; i++)
-                txx9_irq_set_pri(i, irc_level[i]);
-        for (i = JMR3927_IRQ_IOC; i < JMR3927_IRQ_IOC + JMR3927_NR_IRQ_IOC; i++)
-                set_irq_chip_and_handler(i, &jmr3927_irq_ioc, handle_level_irq);
 }
diff --git a/arch/mips/txx9/jmr3927/kgdb_io.c b/arch/mips/txx9/jmr3927/kgdb_io.c
deleted file mode 100644
index 5bd757e56f79..000000000000
--- a/arch/mips/txx9/jmr3927/kgdb_io.c
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- *      Low level uart routines to directly access a TX[34]927 SIO.
- *
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *              ahennessy@mvista.com or source@mvista.com
- *
- * Based on arch/mips/ddb5xxx/ddb5477/kgdb_io.c
- *
- * Copyright (C) 2000-2001 Toshiba Corporation
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <asm/txx9/jmr3927.h>
-
-#define TIMEOUT       0xffffff
-
-static int remoteDebugInitialized = 0;
-static void debugInit(int baud);
-
-int putDebugChar(unsigned char c)
-{
-        int i = 0;
-
-        if (!remoteDebugInitialized) {
-                remoteDebugInitialized = 1;
-                debugInit(38400);
-        }
-
-        do {
-            slow_down();
-            i++;
-            if (i>TIMEOUT) {
-                break;
-            }
-        } while (!(tx3927_sioptr(0)->cisr & TXx927_SICISR_TXALS));
-        tx3927_sioptr(0)->tfifo = c;
-
-        return 1;
-}
-
-unsigned char getDebugChar(void)
-{
-        int i = 0;
-        int dicr;
-        char c;
-
-        if (!remoteDebugInitialized) {
-                remoteDebugInitialized = 1;
-                debugInit(38400);
-        }
-
-        /* diable RX int. */
-        dicr = tx3927_sioptr(0)->dicr;
-        tx3927_sioptr(0)->dicr = 0;
-
-        do {
-            slow_down();
-            i++;
-            if (i>TIMEOUT) {
-                break;
-            }
-        } while (tx3927_sioptr(0)->disr & TXx927_SIDISR_UVALID)
-                ;
-        c = tx3927_sioptr(0)->rfifo;
-
-        /* clear RX int. status */
-        tx3927_sioptr(0)->disr &= ~TXx927_SIDISR_RDIS;
-        /* enable RX int. */
-        tx3927_sioptr(0)->dicr = dicr;
-
-        return c;
-}
-
-static void debugInit(int baud)
-{
-        tx3927_sioptr(0)->lcr = 0x020;
-        tx3927_sioptr(0)->dicr = 0;
-        tx3927_sioptr(0)->disr = 0x4100;
-        tx3927_sioptr(0)->cisr = 0x014;
-        tx3927_sioptr(0)->fcr = 0;
-        tx3927_sioptr(0)->flcr = 0x02;
-        tx3927_sioptr(0)->bgr = ((JMR3927_BASE_BAUD + baud / 2) / baud) |
-                TXx927_SIBGR_BCLK_T0;
-}
diff --git a/arch/mips/txx9/jmr3927/prom.c b/arch/mips/txx9/jmr3927/prom.c
index 2cadb423face..70c4c8ec3e84 100644
--- a/arch/mips/txx9/jmr3927/prom.c
+++ b/arch/mips/txx9/jmr3927/prom.c
@@ -36,41 +36,18 @@
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
 #include <linux/init.h>
+#include <linux/kernel.h>
 #include <asm/bootinfo.h>
 #include <asm/txx9/generic.h>
 #include <asm/txx9/jmr3927.h>
 
-#define TIMEOUT       0xffffff
-
-void
-prom_putchar(char c)
-{
-        int i = 0;
-
-        do {
-            i++;
-            if (i>TIMEOUT)
-                break;
-        } while (!(tx3927_sioptr(1)->cisr & TXx927_SICISR_TXALS));
-        tx3927_sioptr(1)->tfifo = c;
-        return;
-}
-
-void
-puts(const char *cp)
-{
-    while (*cp)
-        prom_putchar(*cp++);
-    prom_putchar('\r');
-    prom_putchar('\n');
-}
-
 void __init jmr3927_prom_init(void)
 {
         /* CCFG */
         if ((tx3927_ccfgptr->ccfg & TX3927_CCFG_TLBOFF) == 0)
-                puts("Warning: TX3927 TLB off\n");
+                printk(KERN_ERR "TX3927 TLB off\n");
 
         prom_init_cmdline();
         add_memory_region(0, JMR3927_SDRAM_SIZE, BOOT_MEM_RAM);
+        txx9_sio_putchar_init(TX3927_SIO_REG(1));
 }
diff --git a/arch/mips/txx9/jmr3927/setup.c b/arch/mips/txx9/jmr3927/setup.c
index 03647ebe4130..87db41be8a56 100644
--- a/arch/mips/txx9/jmr3927/setup.c
+++ b/arch/mips/txx9/jmr3927/setup.c
@@ -32,27 +32,18 @@
 #include <linux/types.h>
 #include <linux/ioport.h>
 #include <linux/delay.h>
-#include <linux/pm.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
-#ifdef CONFIG_SERIAL_TXX9
-#include <linux/serial_core.h>
-#endif
-#include <asm/txx9tmr.h>
-#include <asm/txx9pio.h>
 #include <asm/reboot.h>
+#include <asm/txx9pio.h>
 #include <asm/txx9/generic.h>
 #include <asm/txx9/pci.h>
 #include <asm/txx9/jmr3927.h>
 #include <asm/mipsregs.h>
 
-extern void puts(const char *cp);
-
-/* don't enable - see errata */
-static int jmr3927_ccfg_toeon;
-
-static inline void do_reset(void)
+static void jmr3927_machine_restart(char *command)
 {
+        local_irq_disable();
 #if 1   /* Resetting PCI bus */
         jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
         jmr3927_ioc_reg_out(JMR3927_IOC_RESET_PCI, JMR3927_IOC_RESET_ADDR);
@@ -61,33 +52,13 @@ static inline void do_reset(void)
         jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
 #endif
         jmr3927_ioc_reg_out(JMR3927_IOC_RESET_CPU, JMR3927_IOC_RESET_ADDR);
-}
-
-static void jmr3927_machine_restart(char *command)
-{
-        local_irq_disable();
-        puts("Rebooting...");
-        do_reset();
-}
-
-static void jmr3927_machine_halt(void)
-{
-        puts("JMR-TX3927 halted.\n");
-        while (1);
-}
-
-static void jmr3927_machine_power_off(void)
-{
-        puts("JMR-TX3927 halted. Please turn off the power.\n");
-        while (1);
+        /* fallback */
+        (*_machine_halt)();
 }
 
 static void __init jmr3927_time_init(void)
 {
-        txx9_clockevent_init(TX3927_TMR_REG(0),
-                             TXX9_IRQ_BASE + JMR3927_IRQ_IRC_TMR(0),
-                             JMR3927_IMCLK);
-        txx9_clocksource_init(TX3927_TMR_REG(1), JMR3927_IMCLK);
+        tx3927_time_init(0, 1);
 }
 
 #define DO_WRITE_THROUGH
@@ -102,11 +73,6 @@ static void __init jmr3927_mem_setup(void)
         set_io_port_base(JMR3927_PORT_BASE + JMR3927_PCIIO);
 
         _machine_restart = jmr3927_machine_restart;
-        _machine_halt = jmr3927_machine_halt;
-        pm_power_off = jmr3927_machine_power_off;
-
-        /* Reboot on panic */
-        panic_timeout = 180;
 
         /* cache setup */
         {
@@ -125,7 +91,8 @@ static void __init jmr3927_mem_setup(void)
 #endif
 
                 conf = read_c0_conf();
-                conf &= ~(TX39_CONF_ICE | TX39_CONF_DCE | TX39_CONF_WBON | TX39_CONF_CWFON);
+                conf &= ~(TX39_CONF_ICE | TX39_CONF_DCE |
+                          TX39_CONF_WBON | TX39_CONF_CWFON);
                 conf |= mips_ic_disable ? 0 : TX39_CONF_ICE;
                 conf |= mips_dc_disable ? 0 : TX39_CONF_DCE;
                 conf |= mips_config_wbon ? TX39_CONF_WBON : 0;
@@ -138,47 +105,14 @@ static void __init jmr3927_mem_setup(void)
         /* initialize board */
         jmr3927_board_init();
 
-        argptr = prom_getcmdline();
-
-        if ((argptr = strstr(argptr, "toeon")) != NULL)
-                jmr3927_ccfg_toeon = 1;
-        argptr = prom_getcmdline();
-        if ((argptr = strstr(argptr, "ip=")) == NULL) {
-                argptr = prom_getcmdline();
-                strcat(argptr, " ip=bootp");
-        }
-
-#ifdef CONFIG_SERIAL_TXX9
-        {
-                extern int early_serial_txx9_setup(struct uart_port *port);
-                int i;
-                struct uart_port req;
-                for(i = 0; i < 2; i++) {
-                        memset(&req, 0, sizeof(req));
-                        req.line = i;
-                        req.iotype = UPIO_MEM;
-                        req.membase = (unsigned char __iomem *)TX3927_SIO_REG(i);
-                        req.mapbase = TX3927_SIO_REG(i);
-                        req.irq = i == 0 ?
-                                JMR3927_IRQ_IRC_SIO0 : JMR3927_IRQ_IRC_SIO1;
-                        if (i == 0)
-                                req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
-                        req.uartclk = JMR3927_IMCLK;
-                        early_serial_txx9_setup(&req);
-                }
-        }
+        tx3927_sio_init(0, 1 << 1); /* ch1: noCTS */
 #ifdef CONFIG_SERIAL_TXX9_CONSOLE
         argptr = prom_getcmdline();
-        if ((argptr = strstr(argptr, "console=")) == NULL) {
-                argptr = prom_getcmdline();
+        if (!strstr(argptr, "console="))
                 strcat(argptr, " console=ttyS1,115200");
-        }
-#endif
 #endif
 }
 
-static void tx3927_setup(void);
-
 static void __init jmr3927_pci_setup(void)
 {
 #ifdef CONFIG_PCI
@@ -199,32 +133,13 @@ static void __init jmr3927_pci_setup(void)
                 jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
         }
         tx3927_pcic_setup(c, JMR3927_SDRAM_SIZE, extarb);
+        tx3927_setup_pcierr_irq();
 #endif /* CONFIG_PCI */
 }
 
 static void __init jmr3927_board_init(void)
 {
-        tx3927_setup();
-        jmr3927_pci_setup();
-
-        /* SIO0 DTR on */
-        jmr3927_ioc_reg_out(0, JMR3927_IOC_DTR_ADDR);
-
-        jmr3927_led_set(0);
-
-        printk("JMR-TX3927 (Rev %d) --- IOC(Rev %d) DIPSW:%d,%d,%d,%d\n",
-               jmr3927_ioc_reg_in(JMR3927_IOC_BREV_ADDR) & JMR3927_REV_MASK,
-               jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR) & JMR3927_REV_MASK,
-               jmr3927_dipsw1(), jmr3927_dipsw2(),
-               jmr3927_dipsw3(), jmr3927_dipsw4());
-}
-
-static void __init tx3927_setup(void)
-{
-        int i;
-
         txx9_cpu_clock = JMR3927_CORECLK;
-        txx9_gbus_clock = JMR3927_GBUSCLK;
         /* SDRAMC are configured by PROM */
 
         /* ROMC */
@@ -233,74 +148,32 @@ static void __init tx3927_setup(void)
         tx3927_romcptr->cr[3] = JMR3927_ROMCE3 | 0x0003f698;
         tx3927_romcptr->cr[5] = JMR3927_ROMCE5 | 0x0000f218;
 
-        /* CCFG */
-        /* enable Timeout BusError */
-        if (jmr3927_ccfg_toeon)
-                tx3927_ccfgptr->ccfg |= TX3927_CCFG_TOE;
-
-        /* clear BusErrorOnWrite flag */
-        tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_BEOW;
-        /* Disable PCI snoop */
-        tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_PSNP;
-        /* do reset on watchdog */
-        tx3927_ccfgptr->ccfg |= TX3927_CCFG_WR;
-
-#ifdef DO_WRITE_THROUGH
-        /* Enable PCI SNOOP - with write through only */
-        tx3927_ccfgptr->ccfg |= TX3927_CCFG_PSNP;
-#endif
-
         /* Pin selection */
         tx3927_ccfgptr->pcfg &= ~TX3927_PCFG_SELALL;
         tx3927_ccfgptr->pcfg |=
                 TX3927_PCFG_SELSIOC(0) | TX3927_PCFG_SELSIO_ALL |
                 (TX3927_PCFG_SELDMA_ALL & ~TX3927_PCFG_SELDMA(1));
 
-        printk("TX3927 -- CRIR:%08lx CCFG:%08lx PCFG:%08lx\n",
-               tx3927_ccfgptr->crir,
-               tx3927_ccfgptr->ccfg, tx3927_ccfgptr->pcfg);
-
-        /* TMR */
-        for (i = 0; i < TX3927_NR_TMR; i++)
-                txx9_tmr_init(TX3927_TMR_REG(i));
-
-        /* DMA */
-        tx3927_dmaptr->mcr = 0;
-        for (i = 0; i < ARRAY_SIZE(tx3927_dmaptr->ch); i++) {
-                /* reset channel */
-                tx3927_dmaptr->ch[i].ccr = TX3927_DMA_CCR_CHRST;
-                tx3927_dmaptr->ch[i].ccr = 0;
-        }
-        /* enable DMA */
-#ifdef __BIG_ENDIAN
-        tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN;
-#else
-        tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN | TX3927_DMA_MCR_LE;
-#endif
+        tx3927_setup();
 
-        /* PIO */
         /* PIO[15:12] connected to LEDs */
         __raw_writel(0x0000f000, &tx3927_pioptr->dir);
-        __raw_writel(0, &tx3927_pioptr->maskcpu);
-        __raw_writel(0, &tx3927_pioptr->maskext);
-        txx9_gpio_init(TX3927_PIO_REG, 0, 16);
         gpio_request(11, "dipsw1");
         gpio_request(10, "dipsw2");
-        {
-                unsigned int conf;
 
-        conf = read_c0_conf();
-               if (!(conf & TX39_CONF_ICE))
-                       printk("TX3927 I-Cache disabled.\n");
-               if (!(conf & TX39_CONF_DCE))
-                       printk("TX3927 D-Cache disabled.\n");
-               else if (!(conf & TX39_CONF_WBON))
-                       printk("TX3927 D-Cache WriteThrough.\n");
-               else if (!(conf & TX39_CONF_CWFON))
-                       printk("TX3927 D-Cache WriteBack.\n");
-               else
-                       printk("TX3927 D-Cache WriteBack (CWF) .\n");
-        }
+        jmr3927_pci_setup();
+
+        /* SIO0 DTR on */
+        jmr3927_ioc_reg_out(0, JMR3927_IOC_DTR_ADDR);
+
+        jmr3927_led_set(0);
+
+        printk(KERN_INFO
+               "JMR-TX3927 (Rev %d) --- IOC(Rev %d) DIPSW:%d,%d,%d,%d\n",
+               jmr3927_ioc_reg_in(JMR3927_IOC_BREV_ADDR) & JMR3927_REV_MASK,
+               jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR) & JMR3927_REV_MASK,
+               jmr3927_dipsw1(), jmr3927_dipsw2(),
+               jmr3927_dipsw3(), jmr3927_dipsw4());
 }
 
 /* This trick makes rtc-ds1742 driver usable as is. */
@@ -316,42 +189,21 @@ static unsigned long jmr3927_swizzle_addr_b(unsigned long port)
 #endif
 }
 
-static int __init jmr3927_rtc_init(void)
+static void __init jmr3927_rtc_init(void)
 {
         static struct resource __initdata res = {
                 .start  = JMR3927_IOC_NVRAMB_ADDR - IO_BASE,
                 .end    = JMR3927_IOC_NVRAMB_ADDR - IO_BASE + 0x800 - 1,
                 .flags  = IORESOURCE_MEM,
         };
-        struct platform_device *dev;
-        dev = platform_device_register_simple("rtc-ds1742", -1, &res, 1);
-        return IS_ERR(dev) ? PTR_ERR(dev) : 0;
-}
-
-/* Watchdog support */
-
-static int __init txx9_wdt_init(unsigned long base)
-{
-        struct resource res = {
-                .start  = base,
-                .end    = base + 0x100 - 1,
-                .flags  = IORESOURCE_MEM,
-        };
-        struct platform_device *dev =
-                platform_device_register_simple("txx9wdt", -1, &res, 1);
-        return IS_ERR(dev) ? PTR_ERR(dev) : 0;
-}
-
-static int __init jmr3927_wdt_init(void)
-{
-        return txx9_wdt_init(TX3927_TMR_REG(2));
+        platform_device_register_simple("rtc-ds1742", -1, &res, 1);
 }
 
 static void __init jmr3927_device_init(void)
 {
         __swizzle_addr_b = jmr3927_swizzle_addr_b;
         jmr3927_rtc_init();
-        jmr3927_wdt_init();
+        tx3927_wdt_init();
 }
 
 struct txx9_board_vec jmr3927_vec __initdata = {
diff --git a/arch/mips/txx9/rbtx4927/irq.c b/arch/mips/txx9/rbtx4927/irq.c
index cd748a930328..00cd5231da30 100644
--- a/arch/mips/txx9/rbtx4927/irq.c
+++ b/arch/mips/txx9/rbtx4927/irq.c
@@ -27,85 +27,86 @@
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
 /*
-IRQ  Device
-00   RBTX4927-ISA/00
-01   RBTX4927-ISA/01 PS2/Keyboard
-02   RBTX4927-ISA/02 Cascade RBTX4927-ISA (irqs 8-15)
-03   RBTX4927-ISA/03
-04   RBTX4927-ISA/04
-05   RBTX4927-ISA/05
-06   RBTX4927-ISA/06
-07   RBTX4927-ISA/07
-08   RBTX4927-ISA/08
-09   RBTX4927-ISA/09
-10   RBTX4927-ISA/10
-11   RBTX4927-ISA/11
-12   RBTX4927-ISA/12 PS2/Mouse (not supported at this time)
-13   RBTX4927-ISA/13
-14   RBTX4927-ISA/14 IDE
-15   RBTX4927-ISA/15
-
-16   TX4927-CP0/00 Software 0
-17   TX4927-CP0/01 Software 1
-18   TX4927-CP0/02 Cascade TX4927-CP0
-19   TX4927-CP0/03 Multiplexed -- do not use
-20   TX4927-CP0/04 Multiplexed -- do not use
-21   TX4927-CP0/05 Multiplexed -- do not use
-22   TX4927-CP0/06 Multiplexed -- do not use
-23   TX4927-CP0/07 CPU TIMER
-
-24   TX4927-PIC/00
-25   TX4927-PIC/01
-26   TX4927-PIC/02
-27   TX4927-PIC/03 Cascade RBTX4927-IOC
-28   TX4927-PIC/04
-29   TX4927-PIC/05 RBTX4927 RTL-8019AS ethernet
-30   TX4927-PIC/06
-31   TX4927-PIC/07
-32   TX4927-PIC/08 TX4927 SerialIO Channel 0
-33   TX4927-PIC/09 TX4927 SerialIO Channel 1
-34   TX4927-PIC/10
-35   TX4927-PIC/11
-36   TX4927-PIC/12
-37   TX4927-PIC/13
-38   TX4927-PIC/14
-39   TX4927-PIC/15
-40   TX4927-PIC/16 TX4927 PCI PCI-C
-41   TX4927-PIC/17
-42   TX4927-PIC/18
-43   TX4927-PIC/19
-44   TX4927-PIC/20
-45   TX4927-PIC/21
-46   TX4927-PIC/22 TX4927 PCI PCI-ERR
-47   TX4927-PIC/23 TX4927 PCI PCI-PMA (not used)
-48   TX4927-PIC/24
-49   TX4927-PIC/25
-50   TX4927-PIC/26
-51   TX4927-PIC/27
-52   TX4927-PIC/28
-53   TX4927-PIC/29
-54   TX4927-PIC/30
-55   TX4927-PIC/31
-
-56 RBTX4927-IOC/00 FPCIB0 PCI-D PJ4/A PJ5/B SB/C PJ6/D PJ7/A (SouthBridge/NotUsed)        [RTL-8139=PJ4]
-57 RBTX4927-IOC/01 FPCIB0 PCI-C PJ4/D PJ5/A SB/B PJ6/C PJ7/D (SouthBridge/NotUsed)        [RTL-8139=PJ5]
-58 RBTX4927-IOC/02 FPCIB0 PCI-B PJ4/C PJ5/D SB/A PJ6/B PJ7/C (SouthBridge/IDE/pin=1,INTR) [RTL-8139=NotSupported]
-59 RBTX4927-IOC/03 FPCIB0 PCI-A PJ4/B PJ5/C SB/D PJ6/A PJ7/B (SouthBridge/USB/pin=4)      [RTL-8139=PJ6]
-60 RBTX4927-IOC/04
-61 RBTX4927-IOC/05
-62 RBTX4927-IOC/06
-63 RBTX4927-IOC/07
-
-NOTES:
-SouthBridge/INTR is mapped to SouthBridge/A=PCI-B/#58
-SouthBridge/ISA/pin=0 no pci irq used by this device
-SouthBridge/IDE/pin=1 no pci irq used by this device, using INTR via ISA IRQ14
-SouthBridge/USB/pin=4 using pci irq SouthBridge/D=PCI-A=#59
-SouthBridge/PMC/pin=0 no pci irq used by this device
-SuperIO/PS2/Keyboard, using INTR via ISA IRQ1
-SuperIO/PS2/Mouse, using INTR via ISA IRQ12 (mouse not currently supported)
-JP7 is not bus master -- do NOT use -- only 4 pci bus master's allowed -- SouthBridge, JP4, JP5, JP6
-*/
+ * I8259A_IRQ_BASE+00
+ * I8259A_IRQ_BASE+01 PS2/Keyboard
+ * I8259A_IRQ_BASE+02 Cascade RBTX4927-ISA (irqs 8-15)
+ * I8259A_IRQ_BASE+03
+ * I8259A_IRQ_BASE+04
+ * I8259A_IRQ_BASE+05
+ * I8259A_IRQ_BASE+06
+ * I8259A_IRQ_BASE+07
+ * I8259A_IRQ_BASE+08
+ * I8259A_IRQ_BASE+09
+ * I8259A_IRQ_BASE+10
+ * I8259A_IRQ_BASE+11
+ * I8259A_IRQ_BASE+12 PS2/Mouse (not supported at this time)
+ * I8259A_IRQ_BASE+13
+ * I8259A_IRQ_BASE+14 IDE
+ * I8259A_IRQ_BASE+15
+ *
+ * MIPS_CPU_IRQ_BASE+00 Software 0
+ * MIPS_CPU_IRQ_BASE+01 Software 1
+ * MIPS_CPU_IRQ_BASE+02 Cascade TX4927-CP0
+ * MIPS_CPU_IRQ_BASE+03 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+04 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+05 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+06 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+07 CPU TIMER
+ *
+ * TXX9_IRQ_BASE+00
+ * TXX9_IRQ_BASE+01
+ * TXX9_IRQ_BASE+02
+ * TXX9_IRQ_BASE+03 Cascade RBTX4927-IOC
+ * TXX9_IRQ_BASE+04
+ * TXX9_IRQ_BASE+05 RBTX4927 RTL-8019AS ethernet
+ * TXX9_IRQ_BASE+06
+ * TXX9_IRQ_BASE+07
+ * TXX9_IRQ_BASE+08 TX4927 SerialIO Channel 0
+ * TXX9_IRQ_BASE+09 TX4927 SerialIO Channel 1
+ * TXX9_IRQ_BASE+10
+ * TXX9_IRQ_BASE+11
+ * TXX9_IRQ_BASE+12
+ * TXX9_IRQ_BASE+13
+ * TXX9_IRQ_BASE+14
+ * TXX9_IRQ_BASE+15
+ * TXX9_IRQ_BASE+16 TX4927 PCI PCI-C
+ * TXX9_IRQ_BASE+17
+ * TXX9_IRQ_BASE+18
+ * TXX9_IRQ_BASE+19
+ * TXX9_IRQ_BASE+20
+ * TXX9_IRQ_BASE+21
+ * TXX9_IRQ_BASE+22 TX4927 PCI PCI-ERR
+ * TXX9_IRQ_BASE+23 TX4927 PCI PCI-PMA (not used)
+ * TXX9_IRQ_BASE+24
+ * TXX9_IRQ_BASE+25
+ * TXX9_IRQ_BASE+26
+ * TXX9_IRQ_BASE+27
+ * TXX9_IRQ_BASE+28
+ * TXX9_IRQ_BASE+29
+ * TXX9_IRQ_BASE+30
+ * TXX9_IRQ_BASE+31
+ *
+ * RBTX4927_IRQ_IOC+00 FPCIB0 PCI-D (SouthBridge)
+ * RBTX4927_IRQ_IOC+01 FPCIB0 PCI-C (SouthBridge)
+ * RBTX4927_IRQ_IOC+02 FPCIB0 PCI-B (SouthBridge/IDE/pin=1,INTR)
+ * RBTX4927_IRQ_IOC+03 FPCIB0 PCI-A (SouthBridge/USB/pin=4)
+ * RBTX4927_IRQ_IOC+04
+ * RBTX4927_IRQ_IOC+05
+ * RBTX4927_IRQ_IOC+06
+ * RBTX4927_IRQ_IOC+07
+ *
+ * NOTES:
+ * SouthBridge/INTR is mapped to SouthBridge/A=PCI-B/#58
+ * SouthBridge/ISA/pin=0 no pci irq used by this device
+ * SouthBridge/IDE/pin=1 no pci irq used by this device, using INTR
+ * via ISA IRQ14
+ * SouthBridge/USB/pin=4 using pci irq SouthBridge/D=PCI-A=#59
+ * SouthBridge/PMC/pin=0 no pci irq used by this device
+ * SuperIO/PS2/Keyboard, using INTR via ISA IRQ1
+ * SuperIO/PS2/Mouse, using INTR via ISA IRQ12 (mouse not currently supported)
+ * JP7 is not bus master -- do NOT use -- only 4 pci bus master's
+ * allowed -- SouthBridge, JP4, JP5, JP6
+ */
 
 #include <linux/init.h>
 #include <linux/types.h>
@@ -134,7 +135,7 @@ static int toshiba_rbtx4927_irq_nested(int sw_irq)
         level3 = readb(rbtx4927_imstat_addr) & 0x1f;
         if (level3)
                 sw_irq = RBTX4927_IRQ_IOC + fls(level3) - 1;
-        return (sw_irq);
+        return sw_irq;
 }
 
 static void __init toshiba_rbtx4927_irq_ioc_init(void)
diff --git a/arch/mips/txx9/rbtx4927/prom.c b/arch/mips/txx9/rbtx4927/prom.c
index 5c0de54ebdd2..1dc0a5b1956b 100644
--- a/arch/mips/txx9/rbtx4927/prom.c
+++ b/arch/mips/txx9/rbtx4927/prom.c
@@ -38,4 +38,5 @@ void __init rbtx4927_prom_init(void)
 {
         prom_init_cmdline();
         add_memory_region(0, tx4927_get_mem_size(), BOOT_MEM_RAM);
+        txx9_sio_putchar_init(TX4927_SIO_REG(0) & 0xfffffffffULL);
 }
diff --git a/arch/mips/txx9/rbtx4927/setup.c b/arch/mips/txx9/rbtx4927/setup.c
index 3da20ea3e55c..0d39bafea794 100644
--- a/arch/mips/txx9/rbtx4927/setup.c
+++ b/arch/mips/txx9/rbtx4927/setup.c
@@ -46,12 +46,9 @@
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/pm.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <asm/io.h>
-#include <asm/processor.h>
 #include <asm/reboot.h>
 #include <asm/txx9/generic.h>
 #include <asm/txx9/pci.h>
@@ -103,6 +100,7 @@ static void __init tx4927_pci_setup(void)
                 tx4927_report_pciclk();
                 tx4927_pcic_setup(tx4927_pcicptr, c, extarb);
         }
+        tx4927_setup_pcierr_irq();
 }
 
 static void __init tx4937_pci_setup(void)
@@ -149,6 +147,7 @@ static void __init tx4937_pci_setup(void)
                 tx4938_report_pciclk();
                 tx4927_pcic_setup(tx4938_pcicptr, c, extarb);
         }
+        tx4938_setup_pcierr_irq();
 }
 
 static void __init rbtx4927_arch_init(void)
@@ -165,17 +164,8 @@ static void __init rbtx4937_arch_init(void)
 #define rbtx4937_arch_init NULL
 #endif /* CONFIG_PCI */
 
-static void __noreturn wait_forever(void)
-{
-        while (1)
-                if (cpu_wait)
-                        (*cpu_wait)();
-}
-
 static void toshiba_rbtx4927_restart(char *command)
 {
-        printk(KERN_NOTICE "System Rebooting...\n");
-
         /* enable the s/w reset register */
         writeb(1, rbtx4927_softresetlock_addr);
 
@@ -186,24 +176,8 @@ static void toshiba_rbtx4927_restart(char *command)
         /* do a s/w reset */
         writeb(1, rbtx4927_softreset_addr);
 
-        /* do something passive while waiting for reset */
-        local_irq_disable();
-        wait_forever();
-        /* no return */
-}
-
-static void toshiba_rbtx4927_halt(void)
-{
-        printk(KERN_NOTICE "System Halted\n");
-        local_irq_disable();
-        wait_forever();
-        /* no return */
-}
-
-static void toshiba_rbtx4927_power_off(void)
-{
-        toshiba_rbtx4927_halt();
-        /* no return */
+        /* fallback */
+        (*_machine_halt)();
 }
 
 static void __init rbtx4927_clock_init(void);
@@ -214,9 +188,6 @@ static void __init rbtx4927_mem_setup(void)
         u32 cp0_config;
         char *argptr;
 
-        /* f/w leaves this on at startup */
-        clear_c0_status(ST0_ERL);
-
         /* enable caches -- HCP5 does this, pmon does not */
         cp0_config = read_c0_config();
         cp0_config = cp0_config & ~(TX49_CONF_IC | TX49_CONF_DC);
@@ -231,37 +202,21 @@ static void __init rbtx4927_mem_setup(void)
         }
 
         _machine_restart = toshiba_rbtx4927_restart;
-        _machine_halt = toshiba_rbtx4927_halt;
-        pm_power_off = toshiba_rbtx4927_power_off;
 
 #ifdef CONFIG_PCI
         txx9_alloc_pci_controller(&txx9_primary_pcic,
                                   RBTX4927_PCIMEM, RBTX4927_PCIMEM_SIZE,
                                   RBTX4927_PCIIO, RBTX4927_PCIIO_SIZE);
+        txx9_board_pcibios_setup = tx4927_pcibios_setup;
 #else
         set_io_port_base(KSEG1 + RBTX4927_ISA_IO_OFFSET);
 #endif
 
-        tx4927_setup_serial();
+        tx4927_sio_init(0, 0);
 #ifdef CONFIG_SERIAL_TXX9_CONSOLE
-        argptr = prom_getcmdline();
-        if (strstr(argptr, "console=") == NULL) {
-                strcat(argptr, " console=ttyS0,38400");
-        }
-#endif
-
-#ifdef CONFIG_ROOT_NFS
-        argptr = prom_getcmdline();
-        if (strstr(argptr, "root=") == NULL) {
-                strcat(argptr, " root=/dev/nfs rw");
-        }
-#endif
-
-#ifdef CONFIG_IP_PNP
-        argptr = prom_getcmdline();
-        if (strstr(argptr, "ip=") == NULL) {
-                strcat(argptr, " ip=any");
-        }
+        argptr = prom_getcmdline();
+        if (!strstr(argptr, "console="))
+                strcat(argptr, " console=ttyS0,38400");
 #endif
 }
 
@@ -324,19 +279,17 @@ static void __init rbtx4927_time_init(void)
         tx4927_time_init(0);
 }
 
-static int __init toshiba_rbtx4927_rtc_init(void)
+static void __init toshiba_rbtx4927_rtc_init(void)
 {
         struct resource res = {
                 .start  = RBTX4927_BRAMRTC_BASE - IO_BASE,
                 .end    = RBTX4927_BRAMRTC_BASE - IO_BASE + 0x800 - 1,
                 .flags  = IORESOURCE_MEM,
         };
-        struct platform_device *dev =
-                platform_device_register_simple("rtc-ds1742", -1, &res, 1);
-        return IS_ERR(dev) ? PTR_ERR(dev) : 0;
+        platform_device_register_simple("rtc-ds1742", -1, &res, 1);
 }
 
-static int __init rbtx4927_ne_init(void)
+static void __init rbtx4927_ne_init(void)
 {
         struct resource res[] = {
                 {
@@ -348,36 +301,14 @@ static int __init rbtx4927_ne_init(void)
                         .flags  = IORESOURCE_IRQ,
                 }
         };
-        struct platform_device *dev =
-                platform_device_register_simple("ne", -1,
-                                                res, ARRAY_SIZE(res));
-        return IS_ERR(dev) ? PTR_ERR(dev) : 0;
-}
-
-/* Watchdog support */
-
-static int __init txx9_wdt_init(unsigned long base)
-{
-        struct resource res = {
-                .start  = base,
-                .end    = base + 0x100 - 1,
-                .flags  = IORESOURCE_MEM,
-        };
-        struct platform_device *dev =
-                platform_device_register_simple("txx9wdt", -1, &res, 1);
-        return IS_ERR(dev) ? PTR_ERR(dev) : 0;
-}
-
-static int __init rbtx4927_wdt_init(void)
-{
-        return txx9_wdt_init(TX4927_TMR_REG(2) & 0xfffffffffULL);
+        platform_device_register_simple("ne", -1, res, ARRAY_SIZE(res));
 }
 
 static void __init rbtx4927_device_init(void)
 {
         toshiba_rbtx4927_rtc_init();
         rbtx4927_ne_init();
-        rbtx4927_wdt_init();
+        tx4927_wdt_init();
 }
 
 struct txx9_board_vec rbtx4927_vec __initdata = {
diff --git a/arch/mips/txx9/rbtx4938/irq.c b/arch/mips/txx9/rbtx4938/irq.c
index 3971a061657a..ca2f8306ce93 100644
--- a/arch/mips/txx9/rbtx4938/irq.c
+++ b/arch/mips/txx9/rbtx4938/irq.c
@@ -11,59 +11,57 @@
  */
 
 /*
-IRQ  Device
-
-16   TX4938-CP0/00 Software 0
-17   TX4938-CP0/01 Software 1
-18   TX4938-CP0/02 Cascade TX4938-CP0
-19   TX4938-CP0/03 Multiplexed -- do not use
-20   TX4938-CP0/04 Multiplexed -- do not use
-21   TX4938-CP0/05 Multiplexed -- do not use
-22   TX4938-CP0/06 Multiplexed -- do not use
-23   TX4938-CP0/07 CPU TIMER
-
-24   TX4938-PIC/00
-25   TX4938-PIC/01
-26   TX4938-PIC/02 Cascade RBTX4938-IOC
-27   TX4938-PIC/03 RBTX4938 RTL-8019AS Ethernet
-28   TX4938-PIC/04
-29   TX4938-PIC/05 TX4938 ETH1
-30   TX4938-PIC/06 TX4938 ETH0
-31   TX4938-PIC/07
-32   TX4938-PIC/08 TX4938 SIO 0
-33   TX4938-PIC/09 TX4938 SIO 1
-34   TX4938-PIC/10 TX4938 DMA0
-35   TX4938-PIC/11 TX4938 DMA1
-36   TX4938-PIC/12 TX4938 DMA2
-37   TX4938-PIC/13 TX4938 DMA3
-38   TX4938-PIC/14
-39   TX4938-PIC/15
-40   TX4938-PIC/16 TX4938 PCIC
-41   TX4938-PIC/17 TX4938 TMR0
-42   TX4938-PIC/18 TX4938 TMR1
-43   TX4938-PIC/19 TX4938 TMR2
-44   TX4938-PIC/20
-45   TX4938-PIC/21
-46   TX4938-PIC/22 TX4938 PCIERR
-47   TX4938-PIC/23
-48   TX4938-PIC/24
-49   TX4938-PIC/25
-50   TX4938-PIC/26
-51   TX4938-PIC/27
-52   TX4938-PIC/28
-53   TX4938-PIC/29
-54   TX4938-PIC/30
-55   TX4938-PIC/31 TX4938 SPI
-
-56 RBTX4938-IOC/00 PCI-D
-57 RBTX4938-IOC/01 PCI-C
-58 RBTX4938-IOC/02 PCI-B
-59 RBTX4938-IOC/03 PCI-A
-60 RBTX4938-IOC/04 RTC
-61 RBTX4938-IOC/05 ATA
-62 RBTX4938-IOC/06 MODEM
-63 RBTX4938-IOC/07 SWINT
-*/
+ * MIPS_CPU_IRQ_BASE+00 Software 0
+ * MIPS_CPU_IRQ_BASE+01 Software 1
+ * MIPS_CPU_IRQ_BASE+02 Cascade TX4938-CP0
+ * MIPS_CPU_IRQ_BASE+03 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+04 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+05 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+06 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+07 CPU TIMER
+ *
+ * TXX9_IRQ_BASE+00
+ * TXX9_IRQ_BASE+01
+ * TXX9_IRQ_BASE+02 Cascade RBTX4938-IOC
+ * TXX9_IRQ_BASE+03 RBTX4938 RTL-8019AS Ethernet
+ * TXX9_IRQ_BASE+04
+ * TXX9_IRQ_BASE+05 TX4938 ETH1
+ * TXX9_IRQ_BASE+06 TX4938 ETH0
+ * TXX9_IRQ_BASE+07
+ * TXX9_IRQ_BASE+08 TX4938 SIO 0
+ * TXX9_IRQ_BASE+09 TX4938 SIO 1
+ * TXX9_IRQ_BASE+10 TX4938 DMA0
+ * TXX9_IRQ_BASE+11 TX4938 DMA1
+ * TXX9_IRQ_BASE+12 TX4938 DMA2
+ * TXX9_IRQ_BASE+13 TX4938 DMA3
+ * TXX9_IRQ_BASE+14
+ * TXX9_IRQ_BASE+15
+ * TXX9_IRQ_BASE+16 TX4938 PCIC
+ * TXX9_IRQ_BASE+17 TX4938 TMR0
+ * TXX9_IRQ_BASE+18 TX4938 TMR1
+ * TXX9_IRQ_BASE+19 TX4938 TMR2
+ * TXX9_IRQ_BASE+20
+ * TXX9_IRQ_BASE+21
+ * TXX9_IRQ_BASE+22 TX4938 PCIERR
+ * TXX9_IRQ_BASE+23
+ * TXX9_IRQ_BASE+24
+ * TXX9_IRQ_BASE+25
+ * TXX9_IRQ_BASE+26
+ * TXX9_IRQ_BASE+27
+ * TXX9_IRQ_BASE+28
+ * TXX9_IRQ_BASE+29
+ * TXX9_IRQ_BASE+30
+ * TXX9_IRQ_BASE+31 TX4938 SPI
+ *
+ * RBTX4938_IRQ_IOC+00 PCI-D
+ * RBTX4938_IRQ_IOC+01 PCI-C
+ * RBTX4938_IRQ_IOC+02 PCI-B
+ * RBTX4938_IRQ_IOC+03 PCI-A
+ * RBTX4938_IRQ_IOC+04 RTC
+ * RBTX4938_IRQ_IOC+05 ATA
+ * RBTX4938_IRQ_IOC+06 MODEM
+ * RBTX4938_IRQ_IOC+07 SWINT
+ */
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <asm/mipsregs.h>
@@ -93,9 +91,6 @@ static int toshiba_rbtx4938_irq_nested(int sw_irq)
         return sw_irq;
 }
 
-/**********************************************************************************/
-/* Functions for ioc                                                              */
-/**********************************************************************************/
 static void __init
 toshiba_rbtx4938_irq_ioc_init(void)
 {
diff --git a/arch/mips/txx9/rbtx4938/prom.c b/arch/mips/txx9/rbtx4938/prom.c
index ee189519ce5a..d73123cd2ab9 100644
--- a/arch/mips/txx9/rbtx4938/prom.c
+++ b/arch/mips/txx9/rbtx4938/prom.c
@@ -22,4 +22,5 @@ void __init rbtx4938_prom_init(void)
         prom_init_cmdline();
 #endif
         add_memory_region(0, tx4938_get_mem_size(), BOOT_MEM_RAM);
+        txx9_sio_putchar_init(TX4938_SIO_REG(0) & 0xfffffffffULL);
 }
diff --git a/arch/mips/txx9/rbtx4938/setup.c b/arch/mips/txx9/rbtx4938/setup.c
index 6c2b99bb8af6..9ab48dec0fe8 100644
--- a/arch/mips/txx9/rbtx4938/setup.c
+++ b/arch/mips/txx9/rbtx4938/setup.c
@@ -13,9 +13,6 @@
 #include <linux/types.h>
 #include <linux/ioport.h>
 #include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/console.h>
-#include <linux/pm.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 
@@ -28,33 +25,14 @@
 #include <asm/txx9/spi.h>
 #include <asm/txx9pio.h>
 
-static void rbtx4938_machine_halt(void)
-{
-        printk(KERN_NOTICE "System Halted\n");
-        local_irq_disable();
-
-        while (1)
-                __asm__(".set\tmips3\n\t"
-                        "wait\n\t"
-                        ".set\tmips0");
-}
-
-static void rbtx4938_machine_power_off(void)
-{
-        rbtx4938_machine_halt();
-        /* no return */
-}
-
 static void rbtx4938_machine_restart(char *command)
 {
         local_irq_disable();
-
-        printk("Rebooting...");
         writeb(1, rbtx4938_softresetlock_addr);
         writeb(1, rbtx4938_sfvol_addr);
         writeb(1, rbtx4938_softreset_addr);
-        while(1)
-                ;
+        /* fallback */
+        (*_machine_halt)();
 }
 
 static void __init rbtx4938_pci_setup(void)
@@ -121,6 +99,7 @@ static void __init rbtx4938_pci_setup(void)
                 register_pci_controller(c);
                 tx4927_pcic_setup(tx4938_pcic1ptr, c, 0);
         }
+        tx4938_setup_pcierr_irq();
 #endif /* CONFIG_PCI */
 }
 
@@ -151,19 +130,7 @@ static int __init rbtx4938_ethaddr_init(void)
                 if (sum)
                         printk(KERN_WARNING "seeprom: bad checksum.\n");
         }
-        for (i = 0; i < 2; i++) {
-                unsigned int id =
-                        TXX9_IRQ_BASE + (i ? TX4938_IR_ETH1 : TX4938_IR_ETH0);
-                struct platform_device *pdev;
-                if (!(__raw_readq(&tx4938_ccfgptr->pcfg) &
-                      (i ? TX4938_PCFG_ETH1_SEL : TX4938_PCFG_ETH0_SEL)))
-                        continue;
-                pdev = platform_device_alloc("tc35815-mac", id);
-                if (!pdev ||
-                    platform_device_add_data(pdev, &dat[4 + 6 * i], 6) ||
-                    platform_device_add(pdev))
-                        platform_device_put(pdev);
-        }
+        tx4938_ethaddr_init(&dat[4], &dat[4 + 6]);
 #endif /* CONFIG_PCI */
         return 0;
 }
@@ -193,51 +160,36 @@ static void __init rbtx4938_mem_setup(void)
 
 #ifdef CONFIG_PCI
         txx9_alloc_pci_controller(&txx9_primary_pcic, 0, 0, 0, 0);
+        txx9_board_pcibios_setup = tx4927_pcibios_setup;
 #else
         set_io_port_base(RBTX4938_ETHER_BASE);
 #endif
 
-        tx4938_setup_serial();
+        tx4938_sio_init(7372800, 0);
 #ifdef CONFIG_SERIAL_TXX9_CONSOLE
-        argptr = prom_getcmdline();
-        if (strstr(argptr, "console=") == NULL) {
-                strcat(argptr, " console=ttyS0,38400");
-        }
+        argptr = prom_getcmdline();
+        if (!strstr(argptr, "console="))
+                strcat(argptr, " console=ttyS0,38400");
 #endif
 
 #ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61
-        printk("PIOSEL: disabling both ata and nand selection\n");
-        local_irq_disable();
+        printk(KERN_INFO "PIOSEL: disabling both ata and nand selection\n");
         txx9_clear64(&tx4938_ccfgptr->pcfg,
                      TX4938_PCFG_NDF_SEL | TX4938_PCFG_ATA_SEL);
 #endif
 
 #ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND
-        printk("PIOSEL: enabling nand selection\n");
+        printk(KERN_INFO "PIOSEL: enabling nand selection\n");
         txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_NDF_SEL);
         txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_ATA_SEL);
 #endif
 
 #ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA
-        printk("PIOSEL: enabling ata selection\n");
+        printk(KERN_INFO "PIOSEL: enabling ata selection\n");
         txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_ATA_SEL);
         txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_NDF_SEL);
 #endif
 
-#ifdef CONFIG_IP_PNP
-        argptr = prom_getcmdline();
-        if (strstr(argptr, "ip=") == NULL) {
-                strcat(argptr, " ip=any");
-        }
-#endif
-
-
-#ifdef CONFIG_FB
-        {
-                conswitchp = &dummy_con;
-        }
-#endif
-
         rbtx4938_spi_setup();
         pcfg = ____raw_readq(&tx4938_ccfgptr->pcfg);    /* updated */
         /* fixup piosel */
@@ -258,11 +210,9 @@ static void __init rbtx4938_mem_setup(void)
         rbtx4938_fpga_resource.end = CPHYSADDR(RBTX4938_FPGA_REG_ADDR) + 0xffff;
         rbtx4938_fpga_resource.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
         if (request_resource(&txx9_ce_res[2], &rbtx4938_fpga_resource))
-                printk("request resource for fpga failed\n");
+                printk(KERN_ERR "request resource for fpga failed\n");
 
         _machine_restart = rbtx4938_machine_restart;
-        _machine_halt = rbtx4938_machine_halt;
-        pm_power_off = rbtx4938_machine_power_off;
 
         writeb(0xff, rbtx4938_led_addr);
         printk(KERN_INFO "RBTX4938 --- FPGA(Rev %02x) DIPSW:%02x,%02x\n",
@@ -270,7 +220,7 @@ static void __init rbtx4938_mem_setup(void)
                readb(rbtx4938_dipsw_addr), readb(rbtx4938_bdipsw_addr));
 }
 
-static int __init rbtx4938_ne_init(void)
+static void __init rbtx4938_ne_init(void)
 {
         struct resource res[] = {
                 {
@@ -282,10 +232,7 @@ static int __init rbtx4938_ne_init(void)
                         .flags  = IORESOURCE_IRQ,
                 }
         };
-        struct platform_device *dev =
-                platform_device_register_simple("ne", -1,
-                                                res, ARRAY_SIZE(res));
-        return IS_ERR(dev) ? PTR_ERR(dev) : 0;
+        platform_device_register_simple("ne", -1, res, ARRAY_SIZE(res));
 }
 
 static DEFINE_SPINLOCK(rbtx4938_spi_gpio_lock);
@@ -321,24 +268,6 @@ static struct gpio_chip rbtx4938_spi_gpio_chip = {
         .ngpio = 3,
 };
 
-/* SPI support */
-
-static void __init txx9_spi_init(unsigned long base, int irq)
-{
-        struct resource res[] = {
-                {
-                        .start  = base,
-                        .end    = base + 0x20 - 1,
-                        .flags  = IORESOURCE_MEM,
-                }, {
-                        .start  = irq,
-                        .flags  = IORESOURCE_IRQ,
-                },
-        };
-        platform_device_register_simple("spi_txx9", 0,
-                                        res, ARRAY_SIZE(res));
-}
-
 static int __init rbtx4938_spi_init(void)
 {
         struct spi_board_info srtc_info = {
@@ -361,7 +290,7 @@ static int __init rbtx4938_spi_init(void)
         gpio_direction_output(16 + SEEPROM2_CS, 1);
         gpio_request(16 + SEEPROM3_CS, "seeprom3");
         gpio_direction_output(16 + SEEPROM3_CS, 1);
-        txx9_spi_init(TX4938_SPI_REG & 0xfffffffffULL, RBTX4938_IRQ_IRC_SPI);
+        tx4938_spi_init(0);
         return 0;
 }
 
@@ -372,30 +301,11 @@ static void __init rbtx4938_arch_init(void)
         rbtx4938_spi_init();
 }
 
-/* Watchdog support */
-
-static int __init txx9_wdt_init(unsigned long base)
-{
-        struct resource res = {
-                .start  = base,
-                .end    = base + 0x100 - 1,
-                .flags  = IORESOURCE_MEM,
-        };
-        struct platform_device *dev =
-                platform_device_register_simple("txx9wdt", -1, &res, 1);
-        return IS_ERR(dev) ? PTR_ERR(dev) : 0;
-}
-
-static int __init rbtx4938_wdt_init(void)
-{
-        return txx9_wdt_init(TX4938_TMR_REG(2) & 0xfffffffffULL);
-}
-
 static void __init rbtx4938_device_init(void)
 {
         rbtx4938_ethaddr_init();
         rbtx4938_ne_init();
-        rbtx4938_wdt_init();
+        tx4938_wdt_init();
 }
 
 struct txx9_board_vec rbtx4938_vec __initdata = {
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index fe88418167c5..63c9cafda9c4 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -42,6 +42,9 @@ config GENERIC_HARDIRQS
         bool
         default y
 
+config HAVE_GET_USER_PAGES_FAST
+        def_bool PPC64
+
 config HAVE_SETUP_PER_CPU_AREA
         def_bool PPC64
 
@@ -117,6 +120,7 @@ config PPC
         select HAVE_KPROBES
         select HAVE_ARCH_KGDB
         select HAVE_KRETPROBES
+        select HAVE_ARCH_TRACEHOOK
         select HAVE_LMB
         select HAVE_DMA_ATTRS if PPC64
         select USE_GENERIC_SMP_HELPERS if SMP
diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts
index 7345743d3d96..fbc930410ff6 100644
--- a/arch/powerpc/boot/dts/mpc832x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc832x_mds.dts
@@ -68,6 +68,7 @@
                 #address-cells = <1>;
                 #size-cells = <1>;
                 device_type = "soc";
+                compatible = "simple-bus";
                 ranges = <0x0 0xe0000000 0x00100000>;
                 reg = <0xe0000000 0x00000200>;
                 bus-frequency = <132000000>;
diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts
index e74c045a0f8c..b157d1885a28 100644
--- a/arch/powerpc/boot/dts/mpc832x_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts
@@ -51,6 +51,7 @@
                 #address-cells = <1>;
                 #size-cells = <1>;
                 device_type = "soc";
+                compatible = "simple-bus";
                 ranges = <0x0 0xe0000000 0x00100000>;
                 reg = <0xe0000000 0x00000200>;
                 bus-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts
index 8dfab5662585..700e076ef3f5 100644
--- a/arch/powerpc/boot/dts/mpc8349emitx.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitx.dts
@@ -52,6 +52,7 @@
                 #address-cells = <1>;
                 #size-cells = <1>;
                 device_type = "soc";
+                compatible = "simple-bus";
                 ranges = <0x0 0xe0000000 0x00100000>;
                 reg = <0xe0000000 0x00000200>;
                 bus-frequency = <0>;                    // from bootloader
diff --git a/arch/powerpc/boot/dts/mpc8349emitxgp.dts b/arch/powerpc/boot/dts/mpc8349emitxgp.dts
index 49ca3497eefb..cdd3063258ea 100644
--- a/arch/powerpc/boot/dts/mpc8349emitxgp.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitxgp.dts
@@ -50,6 +50,7 @@
                 #address-cells = <1>;
                 #size-cells = <1>;
                 device_type = "soc";
+                compatible = "simple-bus";
                 ranges = <0x0 0xe0000000 0x00100000>;
                 reg = <0xe0000000 0x00000200>;
                 bus-frequency = <0>;                    // from bootloader
diff --git a/arch/powerpc/boot/dts/mpc834x_mds.dts b/arch/powerpc/boot/dts/mpc834x_mds.dts
index ba586cb7afbb..783241c00240 100644
--- a/arch/powerpc/boot/dts/mpc834x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc834x_mds.dts
@@ -57,6 +57,7 @@
                 #address-cells = <1>;
                 #size-cells = <1>;
                 device_type = "soc";
+                compatible = "simple-bus";
                 ranges = <0x0 0xe0000000 0x00100000>;
                 reg = <0xe0000000 0x00000200>;
                 bus-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts
index 3701dae1ee02..a3b76a709951 100644
--- a/arch/powerpc/boot/dts/mpc836x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc836x_mds.dts
@@ -61,6 +61,7 @@
                 #address-cells = <1>;
                 #size-cells = <1>;
                 device_type = "soc";
+                compatible = "simple-bus";
                 ranges = <0x0 0xe0000000 0x00100000>;
                 reg = <0xe0000000 0x00000200>;
                 bus-frequency = <264000000>;
diff --git a/arch/powerpc/boot/dts/mpc836x_rdk.dts b/arch/powerpc/boot/dts/mpc836x_rdk.dts
index 8acd1d6577f2..89c9202f8bd7 100644
--- a/arch/powerpc/boot/dts/mpc836x_rdk.dts
+++ b/arch/powerpc/boot/dts/mpc836x_rdk.dts
@@ -149,18 +149,14 @@
                 };
 
                 crypto@30000 {
-                        compatible = "fsl,sec2-crypto";
+                        compatible = "fsl,sec2.0";
                         reg = <0x30000 0x10000>;
-                        interrupts = <11 8>;
+                        interrupts = <11 0x8>;
                         interrupt-parent = <&ipic>;
-                        num-channels = <4>;
-                        channel-fifo-len = <24>;
-                        exec-units-mask = <0x7e>;
-                        /*
-                         * desc mask is for rev1.x, we need runtime fixup
-                         * for >=2.x
-                         */
-                        descriptor-types-mask = <0x1010ebf>;
+                        fsl,num-channels = <4>;
+                        fsl,channel-fifo-len = <24>;
+                        fsl,exec-units-mask = <0x7e>;
+                        fsl,descriptor-types-mask = <0x01010ebf>;
                 };
 
                 ipic: interrupt-controller@700 {
diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts
index 0a700cb5f611..432782b6d20a 100644
--- a/arch/powerpc/boot/dts/mpc8377_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8377_mds.dts
@@ -117,6 +117,7 @@
                 #address-cells = <1>;
                 #size-cells = <1>;
                 device_type = "soc";
+                compatible = "simple-bus";
                 ranges = <0x0 0xe0000000 0x00100000>;
                 reg = <0xe0000000 0x00000200>;
                 bus-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8378_mds.dts b/arch/powerpc/boot/dts/mpc8378_mds.dts
index 29c8c76a58f7..ed32c8ddafe3 100644
--- a/arch/powerpc/boot/dts/mpc8378_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8378_mds.dts
@@ -117,6 +117,7 @@
                 #address-cells = <1>;
                 #size-cells = <1>;
                 device_type = "soc";
+                compatible = "simple-bus";
                 ranges = <0x0 0xe0000000 0x00100000>;
                 reg = <0xe0000000 0x00000200>;
                 bus-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8379_mds.dts b/arch/powerpc/boot/dts/mpc8379_mds.dts
index d641a8985ea3..f4db9ed4a301 100644
--- a/arch/powerpc/boot/dts/mpc8379_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8379_mds.dts
@@ -117,6 +117,7 @@
                 #address-cells = <1>;
                 #size-cells = <1>;
                 device_type = "soc";
+                compatible = "simple-bus";
                 ranges = <0x0 0xe0000000 0x00100000>;
                 reg = <0xe0000000 0x00000200>;
                 bus-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8536ds.dts b/arch/powerpc/boot/dts/mpc8536ds.dts
index 02cfa24a1695..1505d6855eff 100644
--- a/arch/powerpc/boot/dts/mpc8536ds.dts
+++ b/arch/powerpc/boot/dts/mpc8536ds.dts
@@ -49,6 +49,7 @@
                 #address-cells = <1>;
                 #size-cells = <1>;
                 device_type = "soc";
+                compatible = "simple-bus";
                 ranges = <0x0 0xffe00000 0x100000>;
                 reg = <0xffe00000 0x1000>;
                 bus-frequency = <0>;            // Filled out by uboot.
diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts
index f2273a872b11..9568bfaff8f7 100644
--- a/arch/powerpc/boot/dts/mpc8540ads.dts
+++ b/arch/powerpc/boot/dts/mpc8540ads.dts
@@ -53,6 +53,7 @@
                 #address-cells = <1>;
                 #size-cells = <1>;
                 device_type = "soc";
+                compatible = "simple-bus";
                 ranges = <0x0 0xe0000000 0x100000>;
                 reg = <0xe0000000 0x100000>;    // CCSRBAR 1M
                 bus-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts
index c4469f19ff82..6480f4fd96e0 100644
--- a/arch/powerpc/boot/dts/mpc8541cds.dts
+++ b/arch/powerpc/boot/dts/mpc8541cds.dts
@@ -53,6 +53,7 @@
                 #address-cells = <1>;
                 #size-cells = <1>;
                 device_type = "soc";
+                compatible = "simple-bus";
                 ranges = <0x0 0xe0000000 0x100000>;
                 reg = <0xe0000000 0x1000>;      // CCSRBAR 1M
                 bus-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8544ds.dts b/arch/powerpc/boot/dts/mpc8544ds.dts
index 7d3829d3495e..f1fb20737e3e 100644
--- a/arch/powerpc/boot/dts/mpc8544ds.dts
+++ b/arch/powerpc/boot/dts/mpc8544ds.dts
@@ -54,6 +54,7 @@
                 #address-cells = <1>;
                 #size-cells = <1>;
                 device_type = "soc";
+                compatible = "simple-bus";
 
                 ranges = <0x0 0xe0000000 0x100000>;
                 reg = <0xe0000000 0x1000>;      // CCSRBAR 1M
diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts
index d84466bb7eca..431b496270dc 100644
--- a/arch/powerpc/boot/dts/mpc8548cds.dts
+++ b/arch/powerpc/boot/dts/mpc8548cds.dts
@@ -58,6 +58,7 @@
                 #address-cells = <1>;
                 #size-cells = <1>;
                 device_type = "soc";
+                compatible = "simple-bus";
                 ranges = <0x0 0xe0000000 0x100000>;
                 reg = <0xe0000000 0x1000>;      // CCSRBAR
                 bus-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts
index e03a78006283..d833a5c4f476 100644
--- a/arch/powerpc/boot/dts/mpc8555cds.dts
+++ b/arch/powerpc/boot/dts/mpc8555cds.dts
@@ -53,6 +53,7 @@
                 #address-cells = <1>;
                 #size-cells = <1>;
                 device_type = "soc";
+                compatible = "simple-bus";
                 ranges = <0x0 0xe0000000 0x100000>;
                 reg = <0xe0000000 0x1000>;      // CCSRBAR 1M
                 bus-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8560ads.dts b/arch/powerpc/boot/dts/mpc8560ads.dts
index ba8159de040b..4d1f2f284094 100644
--- a/arch/powerpc/boot/dts/mpc8560ads.dts
+++ b/arch/powerpc/boot/dts/mpc8560ads.dts
@@ -53,6 +53,7 @@
                 #address-cells = <1>;
                 #size-cells = <1>;
                 device_type = "soc";
+                compatible = "simple-bus";
                 ranges = <0x0 0xe0000000 0x100000>;
                 reg = <0xe0000000 0x200>;
                 bus-frequency = <330000000>;
diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts
index 9c30a34821dc..a15f10343f53 100644
--- a/arch/powerpc/boot/dts/mpc8568mds.dts
+++ b/arch/powerpc/boot/dts/mpc8568mds.dts
@@ -60,6 +60,7 @@
                 #address-cells = <1>;
                 #size-cells = <1>;
                 device_type = "soc";
+                compatible = "simple-bus";
                 ranges = <0x0 0xe0000000 0x100000>;
                 reg = <0xe0000000 0x1000>;
                 bus-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8572ds.dts b/arch/powerpc/boot/dts/mpc8572ds.dts
index 08c61e3daecc..e124dd18fb5a 100644
--- a/arch/powerpc/boot/dts/mpc8572ds.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds.dts
@@ -68,6 +68,7 @@
                 #address-cells = <1>;
                 #size-cells = <1>;
                 device_type = "soc";
+                compatible = "simple-bus";
                 ranges = <0x0 0xffe00000 0x100000>;
                 reg = <0xffe00000 0x1000>;      // CCSRBAR & soc regs, remove once parse code for immrbase fixed
                 bus-frequency = <0>;            // Filled out by uboot.
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index 81c8324a4a3c..1cbbf7033641 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -148,7 +148,7 @@ transfer_to_handler:
         /* Check to see if the dbcr0 register is set up to debug.  Use the
            internal debug mode bit to do this. */
         lwz     r12,THREAD_DBCR0(r12)
-        andis.  r12,r12,(DBCR0_IDM  | DBSR_DAC1R | DBSR_DAC1W)@h
+        andis.  r12,r12,DBCR0_IDM@h
         beq+    3f
         /* From user and task is ptraced - load up global dbcr0 */
         li      r12,-1                  /* clear all pending debug events */
@@ -292,7 +292,7 @@ syscall_exit_cont:
         /* If the process has its own DBCR0 value, load it up.  The internal
            debug mode bit tells us that dbcr0 should be loaded. */
         lwz     r0,THREAD+THREAD_DBCR0(r2)
-        andis.  r10,r0,(DBCR0_IDM  | DBSR_DAC1R | DBSR_DAC1W)@h
+        andis.  r10,r0,DBCR0_IDM@h
         bnel-   load_dbcr0
 #endif
 #ifdef CONFIG_44x
@@ -343,7 +343,12 @@ syscall_dotrace:
         stw     r0,_TRAP(r1)
         addi    r3,r1,STACK_FRAME_OVERHEAD
         bl      do_syscall_trace_enter
-        lwz     r0,GPR0(r1)     /* Restore original registers */
+        /*
+         * Restore argument registers possibly just changed.
+         * We use the return value of do_syscall_trace_enter
+         * for call number to look up in the table (r0).
+         */
+        mr      r0,r3
         lwz     r3,GPR3(r1)
         lwz     r4,GPR4(r1)
         lwz     r5,GPR5(r1)
@@ -720,7 +725,7 @@ restore_user:
         /* Check whether this process has its own DBCR0 value.  The internal
            debug mode bit tells us that dbcr0 should be loaded. */
         lwz     r0,THREAD+THREAD_DBCR0(r2)
-        andis.  r10,r0,(DBCR0_IDM  | DBSR_DAC1R | DBSR_DAC1W)@h
+        andis.  r10,r0,DBCR0_IDM@h
         bnel-   load_dbcr0
 #endif
 
@@ -1055,8 +1060,8 @@ do_user_signal:			/* r10 contains MSR_KERNEL here */
         SAVE_NVGPRS(r1)
         rlwinm  r3,r3,0,0,30
         stw     r3,_TRAP(r1)
-2:      li      r3,0
-        addi    r4,r1,STACK_FRAME_OVERHEAD
+2:      addi    r3,r1,STACK_FRAME_OVERHEAD
+        mr      r4,r9
         bl      do_signal
         REST_NVGPRS(r1)
         b       recheck
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index d7369243ae44..2d802e97097c 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -214,7 +214,12 @@ syscall_dotrace:
         bl      .save_nvgprs
         addi    r3,r1,STACK_FRAME_OVERHEAD
         bl      .do_syscall_trace_enter
-        ld      r0,GPR0(r1)     /* Restore original registers */
+        /*
+         * Restore argument registers possibly just changed.
+         * We use the return value of do_syscall_trace_enter
+         * for the call number to look up in the table (r0).
+         */
+        mr      r0,r3
         ld      r3,GPR3(r1)
         ld      r4,GPR4(r1)
         ld      r5,GPR5(r1)
@@ -638,8 +643,7 @@ user_work:
         b       .ret_from_except_lite
 
 1:      bl      .save_nvgprs
-        li      r3,0
-        addi    r4,r1,STACK_FRAME_OVERHEAD
+        addi    r3,r1,STACK_FRAME_OVERHEAD
         bl      .do_signal
         b       .ret_from_except
 
diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c
index 4d96e1db55ee..9ddfaef1a184 100644
--- a/arch/powerpc/kernel/legacy_serial.c
+++ b/arch/powerpc/kernel/legacy_serial.c
@@ -493,18 +493,18 @@ static int __init serial_dev_init(void)
 device_initcall(serial_dev_init);
 
 
+#ifdef CONFIG_SERIAL_8250_CONSOLE
 /*
  * This is called very early, as part of console_init() (typically just after
  * time_init()). This function is respondible for trying to find a good
  * default console on serial ports. It tries to match the open firmware
- * default output with one of the available serial console drivers, either
- * one of the platform serial ports that have been probed earlier by
- * find_legacy_serial_ports() or some more platform specific ones.
+ * default output with one of the available serial console drivers that have
+ * been probed earlier by find_legacy_serial_ports()
  */
 static int __init check_legacy_serial_console(void)
 {
         struct device_node *prom_stdout = NULL;
-        int speed = 0, offset = 0;
+        int i, speed = 0, offset = 0;
         const char *name;
         const u32 *spd;
 
@@ -548,31 +548,20 @@ static int __init check_legacy_serial_console(void)
         if (spd)
                 speed = *spd;
 
-        if (0)
-                ;
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-        else if (strcmp(name, "serial") == 0) {
-                int i;
-                /* Look for it in probed array */
-                for (i = 0; i < legacy_serial_count; i++) {
-                        if (prom_stdout != legacy_serial_infos[i].np)
-                                continue;
-                        offset = i;
-                        speed = legacy_serial_infos[i].speed;
-                        break;
-                }
-                if (i >= legacy_serial_count)
-                        goto not_found;
+        if (strcmp(name, "serial") != 0)
+                goto not_found;
+
+        /* Look for it in probed array */
+        for (i = 0; i < legacy_serial_count; i++) {
+                if (prom_stdout != legacy_serial_infos[i].np)
+                        continue;
+                offset = i;
+                speed = legacy_serial_infos[i].speed;
+                break;
         }
-#endif /* CONFIG_SERIAL_8250_CONSOLE */
-#ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE
-        else if (strcmp(name, "ch-a") == 0)
-                offset = 0;
-        else if (strcmp(name, "ch-b") == 0)
-                offset = 1;
-#endif /* CONFIG_SERIAL_PMACZILOG_CONSOLE */
-        else
+        if (i >= legacy_serial_count)
                 goto not_found;
+
         of_node_put(prom_stdout);
 
         DBG("Found serial console at ttyS%d\n", offset);
@@ -591,3 +580,4 @@ static int __init check_legacy_serial_console(void)
 }
 console_initcall(check_legacy_serial_console);
 
+#endif /* CONFIG_SERIAL_8250_CONSOLE */
diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c
index 9f856a0c3e38..1a09719c7628 100644
--- a/arch/powerpc/kernel/lparcfg.c
+++ b/arch/powerpc/kernel/lparcfg.c
@@ -636,10 +636,6 @@ static ssize_t lparcfg_write(struct file *file, const char __user * buf,
                 retval = -EIO;
         } else if (retval == H_PARAMETER) {
                 retval = -EINVAL;
-        } else {
-                printk(KERN_WARNING "%s: received unknown hv return code %ld",
-                       __func__, retval);
-                retval = -EIO;
         }
 
         return retval;
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index db2497ccc111..e030f3bd5024 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -254,7 +254,7 @@ void do_dabr(struct pt_regs *regs, unsigned long address,
                 return;
 
         /* Clear the DAC and struct entries.  One shot trigger */
-#if (defined(CONFIG_44x) || defined(CONFIG_BOOKE))
+#if defined(CONFIG_BOOKE)
         mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) & ~(DBSR_DAC1R | DBSR_DAC1W
                                                         | DBCR0_IDM));
 #endif
@@ -286,7 +286,7 @@ int set_dabr(unsigned long dabr)
         mtspr(SPRN_DABR, dabr);
 #endif
 
-#if defined(CONFIG_44x) || defined(CONFIG_BOOKE)
+#if defined(CONFIG_BOOKE)
         mtspr(SPRN_DAC1, dabr);
 #endif
 
@@ -373,7 +373,7 @@ struct task_struct *__switch_to(struct task_struct *prev,
         if (unlikely(__get_cpu_var(current_dabr) != new->thread.dabr))
                 set_dabr(new->thread.dabr);
 
-#if defined(CONFIG_44x) || defined(CONFIG_BOOKE)
+#if defined(CONFIG_BOOKE)
         /* If new thread DAC (HW breakpoint) is the same then leave it */
         if (new->thread.dabr)
                 set_dabr(new->thread.dabr);
@@ -568,7 +568,7 @@ void flush_thread(void)
                 current->thread.dabr = 0;
                 set_dabr(0);
 
-#if defined(CONFIG_44x) || defined(CONFIG_BOOKE)
+#if defined(CONFIG_BOOKE)
                 current->thread.dbcr0 &= ~(DBSR_DAC1R | DBSR_DAC1W);
 #endif
         }
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index c4ab2195b9cb..b72849ac7db3 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -205,8 +205,6 @@ static int __initdata mem_reserve_cnt;
 static cell_t __initdata regbuf[1024];
 
 
-#define MAX_CPU_THREADS 2
-
 /*
  * Error results ... some OF calls will return "-1" on error, some
  * will return 0, some will return either. To simplify, here are
@@ -1339,10 +1337,6 @@ static void __init prom_hold_cpus(void)
         unsigned int reg;
         phandle node;
         char type[64];
-        int cpuid = 0;
-        unsigned int interrupt_server[MAX_CPU_THREADS];
-        unsigned int cpu_threads, hw_cpu_num;
-        int propsize;
         struct prom_t *_prom = &RELOC(prom);
         unsigned long *spinloop
                 = (void *) LOW_ADDR(__secondary_hold_spinloop);
@@ -1386,7 +1380,6 @@ static void __init prom_hold_cpus(void)
                 reg = -1;
                 prom_getprop(node, "reg", &reg, sizeof(reg));
 
-                prom_debug("\ncpuid        = 0x%x\n", cpuid);
                 prom_debug("cpu hw idx   = 0x%x\n", reg);
 
                 /* Init the acknowledge var which will be reset by
@@ -1395,28 +1388,9 @@ static void __init prom_hold_cpus(void)
                  */
                 *acknowledge = (unsigned long)-1;
 
-                propsize = prom_getprop(node, "ibm,ppc-interrupt-server#s",
-                                        &interrupt_server,
-                                        sizeof(interrupt_server));
-                if (propsize < 0) {
-                        /* no property.  old hardware has no SMT */
-                        cpu_threads = 1;
-                        interrupt_server[0] = reg; /* fake it with phys id */
-                } else {
-                        /* We have a threaded processor */
-                        cpu_threads = propsize / sizeof(u32);
-                        if (cpu_threads > MAX_CPU_THREADS) {
-                                prom_printf("SMT: too many threads!\n"
-                                            "SMT: found %x, max is %x\n",
-                                            cpu_threads, MAX_CPU_THREADS);
-                                cpu_threads = 1; /* ToDo: panic? */
-                        }
-                }
-
-                hw_cpu_num = interrupt_server[0];
-                if (hw_cpu_num != _prom->cpu) {
+                if (reg != _prom->cpu) {
                         /* Primary Thread of non-boot cpu */
-                        prom_printf("%x : starting cpu hw idx %x... ", cpuid, reg);
+                        prom_printf("starting cpu hw idx %x... ", reg);
                         call_prom("start-cpu", 3, 0, node,
                                   secondary_hold, reg);
 
@@ -1431,17 +1405,10 @@ static void __init prom_hold_cpus(void)
                 }
 #ifdef CONFIG_SMP
                 else
-                        prom_printf("%x : boot cpu     %x\n", cpuid, reg);
+                        prom_printf("boot cpu hw idx %x\n", reg);
 #endif /* CONFIG_SMP */
-
-                /* Reserve cpu #s for secondary threads.   They start later. */
-                cpuid += cpu_threads;
         }
 
-        if (cpuid > NR_CPUS)
-                prom_printf("WARNING: maximum CPUs (" __stringify(NR_CPUS)
-                            ") exceeded: ignoring extras\n");
-
         prom_debug("prom_hold_cpus: end...\n");
 }
 
diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c
index a5d0e78779c8..3635be61f899 100644
--- a/arch/powerpc/kernel/ptrace.c
+++ b/arch/powerpc/kernel/ptrace.c
@@ -22,6 +22,7 @@
 #include <linux/errno.h>
 #include <linux/ptrace.h>
 #include <linux/regset.h>
+#include <linux/tracehook.h>
 #include <linux/elf.h>
 #include <linux/user.h>
 #include <linux/security.h>
@@ -374,7 +375,7 @@ static int vsr_get(struct task_struct *target, const struct user_regset *regset,
         flush_vsx_to_thread(target);
 
         for (i = 0; i < 32 ; i++)
-                buf[i] = current->thread.fpr[i][TS_VSRLOWOFFSET];
+                buf[i] = target->thread.fpr[i][TS_VSRLOWOFFSET];
         ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
                                   buf, 0, 32 * sizeof(double));
 
@@ -393,7 +394,7 @@ static int vsr_set(struct task_struct *target, const struct user_regset *regset,
         ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
                                  buf, 0, 32 * sizeof(double));
         for (i = 0; i < 32 ; i++)
-                current->thread.fpr[i][TS_VSRLOWOFFSET] = buf[i];
+                target->thread.fpr[i][TS_VSRLOWOFFSET] = buf[i];
 
 
         return ret;
@@ -717,7 +718,7 @@ void user_disable_single_step(struct task_struct *task)
         struct pt_regs *regs = task->thread.regs;
 
 
-#if defined(CONFIG_44x) || defined(CONFIG_BOOKE)
+#if defined(CONFIG_BOOKE)
         /* If DAC then do not single step, skip */
         if (task->thread.dabr)
                 return;
@@ -744,10 +745,11 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr,
         if (addr > 0)
                 return -EINVAL;
 
+        /* The bottom 3 bits in dabr are flags */
         if ((data & ~0x7UL) >= TASK_SIZE)
                 return -EIO;
 
-#ifdef CONFIG_PPC64
+#ifndef CONFIG_BOOKE
 
         /* For processors using DABR (i.e. 970), the bottom 3 bits are flags.
          *  It was assumed, on previous implementations, that 3 bits were
@@ -769,7 +771,7 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr,
         task->thread.dabr = data;
 
 #endif
-#if defined(CONFIG_44x) || defined(CONFIG_BOOKE)
+#if defined(CONFIG_BOOKE)
 
         /* As described above, it was assumed 3 bits were passed with the data
          *  address, but we will assume only the mode bits will be passed
@@ -973,15 +975,13 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
         case PTRACE_GETVSRREGS:
                 return copy_regset_to_user(child, &user_ppc_native_view,
                                            REGSET_VSX,
-                                           0, (32 * sizeof(vector128) +
-                                               sizeof(u32)),
+                                           0, 32 * sizeof(double),
                                            (void __user *) data);
 
         case PTRACE_SETVSRREGS:
                 return copy_regset_from_user(child, &user_ppc_native_view,
                                              REGSET_VSX,
-                                             0, (32 * sizeof(vector128) +
-                                                 sizeof(u32)),
+                                             0, 32 * sizeof(double),
                                              (const void __user *) data);
 #endif
 #ifdef CONFIG_SPE
@@ -1013,31 +1013,24 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
         return ret;
 }
 
-static void do_syscall_trace(void)
+/*
+ * We must return the syscall number to actually look up in the table.
+ * This can be -1L to skip running any syscall at all.
+ */
+long do_syscall_trace_enter(struct pt_regs *regs)
 {
-        /* the 0x80 provides a way for the tracing parent to distinguish
-           between a syscall stop and SIGTRAP delivery */
-        ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
-                                 ? 0x80 : 0));
-
-        /*
-         * this isn't the same as continuing with a signal, but it will do
-         * for normal use.  strace only continues with a signal if the
-         * stopping signal is not SIGTRAP.  -brl
-         */
-        if (current->exit_code) {
-                send_sig(current->exit_code, current, 1);
-                current->exit_code = 0;
-        }
-}
+        long ret = 0;
 
-void do_syscall_trace_enter(struct pt_regs *regs)
-{
         secure_computing(regs->gpr[0]);
 
-        if (test_thread_flag(TIF_SYSCALL_TRACE)
-            && (current->ptrace & PT_PTRACED))
-                do_syscall_trace();
+        if (test_thread_flag(TIF_SYSCALL_TRACE) &&
+            tracehook_report_syscall_entry(regs))
+                /*
+                 * Tracing decided this syscall should not happen.
+                 * We'll return a bogus call number to get an ENOSYS
+                 * error, but leave the original number in regs->gpr[0].
+                 */
+                ret = -1L;
 
         if (unlikely(current->audit_context)) {
 #ifdef CONFIG_PPC64
@@ -1055,16 +1048,19 @@ void do_syscall_trace_enter(struct pt_regs *regs)
                                             regs->gpr[5] & 0xffffffff,
                                             regs->gpr[6] & 0xffffffff);
         }
+
+        return ret ?: regs->gpr[0];
 }
 
 void do_syscall_trace_leave(struct pt_regs *regs)
 {
+        int step;
+
         if (unlikely(current->audit_context))
                 audit_syscall_exit((regs->ccr&0x10000000)?AUDITSC_FAILURE:AUDITSC_SUCCESS,
                                    regs->result);
 
-        if ((test_thread_flag(TIF_SYSCALL_TRACE)
-             || test_thread_flag(TIF_SINGLESTEP))
-            && (current->ptrace & PT_PTRACED))
-                do_syscall_trace();
+        step = test_thread_flag(TIF_SINGLESTEP);
+        if (step || test_thread_flag(TIF_SYSCALL_TRACE))
+                tracehook_report_syscall_exit(regs, step);
 }
diff --git a/arch/powerpc/kernel/ptrace32.c b/arch/powerpc/kernel/ptrace32.c
index 67bf1a1e7e14..197d49c790ad 100644
--- a/arch/powerpc/kernel/ptrace32.c
+++ b/arch/powerpc/kernel/ptrace32.c
@@ -294,6 +294,8 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
         case PTRACE_SETFPREGS:
         case PTRACE_GETVRREGS:
         case PTRACE_SETVRREGS:
+        case PTRACE_GETVSRREGS:
+        case PTRACE_SETVSRREGS:
         case PTRACE_GETREGS64:
         case PTRACE_SETREGS64:
         case PPC_PTRACE_GETFPREGS:
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index 61a3f4132087..9cc5a52711e5 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -367,7 +367,6 @@ static void __init cpu_init_thread_core_maps(int tpc)
  * setup_cpu_maps - initialize the following cpu maps:
  *                  cpu_possible_map
  *                  cpu_present_map
- *                  cpu_sibling_map
  *
  * Having the possible map set up early allows us to restrict allocations
  * of things like irqstacks to num_possible_cpus() rather than NR_CPUS.
@@ -475,29 +474,6 @@ void __init smp_setup_cpu_maps(void)
          */
         cpu_init_thread_core_maps(nthreads);
 }
-
-/*
- * Being that cpu_sibling_map is now a per_cpu array, then it cannot
- * be initialized until the per_cpu areas have been created.  This
- * function is now called from setup_per_cpu_areas().
- */
-void __init smp_setup_cpu_sibling_map(void)
-{
-#ifdef CONFIG_PPC64
-        int i, cpu, base;
-
-        for_each_possible_cpu(cpu) {
-                DBG("Sibling map for CPU %d:", cpu);
-                base = cpu_first_thread_in_core(cpu);
-                for (i = 0; i < threads_per_core; i++) {
-                        cpu_set(base + i, per_cpu(cpu_sibling_map, cpu));
-                        DBG(" %d", base + i);
-                }
-                DBG("\n");
-        }
-
-#endif /* CONFIG_PPC64 */
-}
 #endif /* CONFIG_SMP */
 
 #ifdef CONFIG_PCSPKR_PLATFORM
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 04d8de9f0fc6..8b25f51f03bf 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -611,9 +611,6 @@ void __init setup_per_cpu_areas(void)
                 paca[i].data_offset = ptr - __per_cpu_start;
                 memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start);
         }
-
-        /* Now that per_cpu is setup, initialize cpu_sibling_map */
-        smp_setup_cpu_sibling_map();
 }
 #endif
 
diff --git a/arch/powerpc/kernel/signal.c b/arch/powerpc/kernel/signal.c
index 7aada783ec6a..a54405ebd7b0 100644
--- a/arch/powerpc/kernel/signal.c
+++ b/arch/powerpc/kernel/signal.c
@@ -9,7 +9,7 @@
  * this archive for more details.
  */
 
-#include <linux/ptrace.h>
+#include <linux/tracehook.h>
 #include <linux/signal.h>
 #include <asm/uaccess.h>
 #include <asm/unistd.h>
@@ -112,7 +112,7 @@ static void check_syscall_restart(struct pt_regs *regs, struct k_sigaction *ka,
         }
 }
 
-int do_signal(sigset_t *oldset, struct pt_regs *regs)
+static int do_signal_pending(sigset_t *oldset, struct pt_regs *regs)
 {
         siginfo_t info;
         int signr;
@@ -147,7 +147,7 @@ int do_signal(sigset_t *oldset, struct pt_regs *regs)
          */
         if (current->thread.dabr) {
                 set_dabr(current->thread.dabr);
-#if defined(CONFIG_44x) || defined(CONFIG_BOOKE)
+#if defined(CONFIG_BOOKE)
                 mtspr(SPRN_DBCR0, current->thread.dbcr0);
 #endif
         }
@@ -177,11 +177,28 @@ int do_signal(sigset_t *oldset, struct pt_regs *regs)
                  * its frame, and we can clear the TLF_RESTORE_SIGMASK flag.
                  */
                 current_thread_info()->local_flags &= ~_TLF_RESTORE_SIGMASK;
+
+                /*
+                 * Let tracing know that we've done the handler setup.
+                 */
+                tracehook_signal_handler(signr, &info, &ka, regs,
+                                         test_thread_flag(TIF_SINGLESTEP));
         }
 
         return ret;
 }
 
+void do_signal(struct pt_regs *regs, unsigned long thread_info_flags)
+{
+        if (thread_info_flags & _TIF_SIGPENDING)
+                do_signal_pending(NULL, regs);
+
+        if (thread_info_flags & _TIF_NOTIFY_RESUME) {
+                clear_thread_flag(TIF_NOTIFY_RESUME);
+                tracehook_notify_resume(regs);
+        }
+}
+
 long sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
                 unsigned long r5, unsigned long r6, unsigned long r7,
                 unsigned long r8, struct pt_regs *regs)
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index f5ae9fa222ea..5337ca7bb649 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -41,6 +41,7 @@
 #include <asm/smp.h>
 #include <asm/time.h>
 #include <asm/machdep.h>
+#include <asm/cputhreads.h>
 #include <asm/cputable.h>
 #include <asm/system.h>
 #include <asm/mpic.h>
@@ -62,10 +63,12 @@ struct thread_info *secondary_ti;
 cpumask_t cpu_possible_map = CPU_MASK_NONE;
 cpumask_t cpu_online_map = CPU_MASK_NONE;
 DEFINE_PER_CPU(cpumask_t, cpu_sibling_map) = CPU_MASK_NONE;
+DEFINE_PER_CPU(cpumask_t, cpu_core_map) = CPU_MASK_NONE;
 
 EXPORT_SYMBOL(cpu_online_map);
 EXPORT_SYMBOL(cpu_possible_map);
 EXPORT_PER_CPU_SYMBOL(cpu_sibling_map);
+EXPORT_PER_CPU_SYMBOL(cpu_core_map);
 
 /* SMP operations for this machine */
 struct smp_ops_t *smp_ops;
@@ -228,6 +231,8 @@ void __devinit smp_prepare_boot_cpu(void)
         BUG_ON(smp_processor_id() != boot_cpuid);
 
         cpu_set(boot_cpuid, cpu_online_map);
+        cpu_set(boot_cpuid, per_cpu(cpu_sibling_map, boot_cpuid));
+        cpu_set(boot_cpuid, per_cpu(cpu_core_map, boot_cpuid));
 #ifdef CONFIG_PPC64
         paca[boot_cpuid].__current = current;
 #endif
@@ -375,11 +380,60 @@ int __cpuinit __cpu_up(unsigned int cpu)
         return 0;
 }
 
+/* Return the value of the reg property corresponding to the given
+ * logical cpu.
+ */
+int cpu_to_core_id(int cpu)
+{
+        struct device_node *np;
+        const int *reg;
+        int id = -1;
+
+        np = of_get_cpu_node(cpu, NULL);
+        if (!np)
+                goto out;
+
+        reg = of_get_property(np, "reg", NULL);
+        if (!reg)
+                goto out;
+
+        id = *reg;
+out:
+        of_node_put(np);
+        return id;
+}
+
+/* Must be called when no change can occur to cpu_present_map,
+ * i.e. during cpu online or offline.
+ */
+static struct device_node *cpu_to_l2cache(int cpu)
+{
+        struct device_node *np;
+        const phandle *php;
+        phandle ph;
+
+        if (!cpu_present(cpu))
+                return NULL;
+
+        np = of_get_cpu_node(cpu, NULL);
+        if (np == NULL)
+                return NULL;
+
+        php = of_get_property(np, "l2-cache", NULL);
+        if (php == NULL)
+                return NULL;
+        ph = *php;
+        of_node_put(np);
+
+        return of_find_node_by_phandle(ph);
+}
 
 /* Activate a secondary processor. */
 int __devinit start_secondary(void *unused)
 {
         unsigned int cpu = smp_processor_id();
+        struct device_node *l2_cache;
+        int i, base;
 
         atomic_inc(&init_mm.mm_count);
         current->active_mm = &init_mm;
@@ -400,6 +454,33 @@ int __devinit start_secondary(void *unused)
 
         ipi_call_lock();
         cpu_set(cpu, cpu_online_map);
+        /* Update sibling maps */
+        base = cpu_first_thread_in_core(cpu);
+        for (i = 0; i < threads_per_core; i++) {
+                if (cpu_is_offline(base + i))
+                        continue;
+                cpu_set(cpu, per_cpu(cpu_sibling_map, base + i));
+                cpu_set(base + i, per_cpu(cpu_sibling_map, cpu));
+
+                /* cpu_core_map should be a superset of
+                 * cpu_sibling_map even if we don't have cache
+                 * information, so update the former here, too.
+                 */
+                cpu_set(cpu, per_cpu(cpu_core_map, base +i));
+                cpu_set(base + i, per_cpu(cpu_core_map, cpu));
+        }
+        l2_cache = cpu_to_l2cache(cpu);
+        for_each_online_cpu(i) {
+                struct device_node *np = cpu_to_l2cache(i);
+                if (!np)
+                        continue;
+                if (np == l2_cache) {
+                        cpu_set(cpu, per_cpu(cpu_core_map, i));
+                        cpu_set(i, per_cpu(cpu_core_map, cpu));
+                }
+                of_node_put(np);
+        }
+        of_node_put(l2_cache);
         ipi_call_unlock();
 
         local_irq_enable();
@@ -437,10 +518,42 @@ void __init smp_cpus_done(unsigned int max_cpus)
 #ifdef CONFIG_HOTPLUG_CPU
 int __cpu_disable(void)
 {
-        if (smp_ops->cpu_disable)
-                return smp_ops->cpu_disable();
+        struct device_node *l2_cache;
+        int cpu = smp_processor_id();
+        int base, i;
+        int err;
 
-        return -ENOSYS;
+        if (!smp_ops->cpu_disable)
+                return -ENOSYS;
+
+        err = smp_ops->cpu_disable();
+        if (err)
+                return err;
+
+        /* Update sibling maps */
+        base = cpu_first_thread_in_core(cpu);
+        for (i = 0; i < threads_per_core; i++) {
+                cpu_clear(cpu, per_cpu(cpu_sibling_map, base + i));
+                cpu_clear(base + i, per_cpu(cpu_sibling_map, cpu));
+                cpu_clear(cpu, per_cpu(cpu_core_map, base +i));
+                cpu_clear(base + i, per_cpu(cpu_core_map, cpu));
+        }
+
+        l2_cache = cpu_to_l2cache(cpu);
+        for_each_present_cpu(i) {
+                struct device_node *np = cpu_to_l2cache(i);
+                if (!np)
+                        continue;
+                if (np == l2_cache) {
+                        cpu_clear(cpu, per_cpu(cpu_core_map, i));
+                        cpu_clear(i, per_cpu(cpu_core_map, cpu));
+                }
+                of_node_put(np);
+        }
+        of_node_put(l2_cache);
+
+
+        return 0;
 }
 
 void __cpu_die(unsigned int cpu)
diff --git a/arch/powerpc/kernel/stacktrace.c b/arch/powerpc/kernel/stacktrace.c
index f2589645870a..b0dbb1daa4df 100644
--- a/arch/powerpc/kernel/stacktrace.c
+++ b/arch/powerpc/kernel/stacktrace.c
@@ -13,7 +13,6 @@
 #include <linux/module.h>
 #include <linux/sched.h>
 #include <linux/stacktrace.h>
-#include <linux/module.h>
 #include <asm/ptrace.h>
 #include <asm/processor.h>
 
diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c
index 800e5e9a087b..56d172d16e56 100644
--- a/arch/powerpc/kernel/sysfs.c
+++ b/arch/powerpc/kernel/sysfs.c
@@ -22,6 +22,8 @@
 
 static DEFINE_PER_CPU(struct cpu, cpu_devices);
 
+static DEFINE_PER_CPU(struct kobject *, cache_toplevel);
+
 /* SMT stuff */
 
 #ifdef CONFIG_PPC_MULTIPLATFORM
@@ -297,8 +299,289 @@ static struct sysdev_attribute pa6t_attrs[] = {
 #endif /* CONFIG_DEBUG_KERNEL */
 };
 
+struct cache_desc {
+        struct kobject kobj;
+        struct cache_desc *next;
+        const char *type;       /* Instruction, Data, or Unified */
+        u32 size;               /* total cache size in KB */
+        u32 line_size;          /* in bytes */
+        u32 nr_sets;            /* number of sets */
+        u32 level;              /* e.g. 1, 2, 3... */
+        u32 associativity;      /* e.g. 8-way... 0 is fully associative */
+};
+
+DEFINE_PER_CPU(struct cache_desc *, cache_desc);
+
+static struct cache_desc *kobj_to_cache_desc(struct kobject *k)
+{
+        return container_of(k, struct cache_desc, kobj);
+}
+
+static void cache_desc_release(struct kobject *k)
+{
+        struct cache_desc *desc = kobj_to_cache_desc(k);
+
+        pr_debug("%s: releasing %s\n", __func__, kobject_name(k));
+
+        if (desc->next)
+                kobject_put(&desc->next->kobj);
+
+        kfree(kobj_to_cache_desc(k));
+}
+
+static ssize_t cache_desc_show(struct kobject *k, struct attribute *attr, char *buf)
+{
+        struct kobj_attribute *kobj_attr;
+
+        kobj_attr = container_of(attr, struct kobj_attribute, attr);
+
+        return kobj_attr->show(k, kobj_attr, buf);
+}
+
+static struct sysfs_ops cache_desc_sysfs_ops = {
+        .show = cache_desc_show,
+};
+
+static struct kobj_type cache_desc_type = {
+        .release = cache_desc_release,
+        .sysfs_ops = &cache_desc_sysfs_ops,
+};
+
+static ssize_t cache_size_show(struct kobject *k, struct kobj_attribute *attr, char *buf)
+{
+        struct cache_desc *cache = kobj_to_cache_desc(k);
+
+        return sprintf(buf, "%uK\n", cache->size);
+}
+
+static struct kobj_attribute cache_size_attr =
+        __ATTR(size, 0444, cache_size_show, NULL);
+
+static ssize_t cache_line_size_show(struct kobject *k, struct kobj_attribute *attr, char *buf)
+{
+        struct cache_desc *cache = kobj_to_cache_desc(k);
+
+        return sprintf(buf, "%u\n", cache->line_size);
+}
+
+static struct kobj_attribute cache_line_size_attr =
+        __ATTR(coherency_line_size, 0444, cache_line_size_show, NULL);
+
+static ssize_t cache_nr_sets_show(struct kobject *k, struct kobj_attribute *attr, char *buf)
+{
+        struct cache_desc *cache = kobj_to_cache_desc(k);
+
+        return sprintf(buf, "%u\n", cache->nr_sets);
+}
+
+static struct kobj_attribute cache_nr_sets_attr =
+        __ATTR(number_of_sets, 0444, cache_nr_sets_show, NULL);
+
+static ssize_t cache_type_show(struct kobject *k, struct kobj_attribute *attr, char *buf)
+{
+        struct cache_desc *cache = kobj_to_cache_desc(k);
+
+        return sprintf(buf, "%s\n", cache->type);
+}
+
+static struct kobj_attribute cache_type_attr =
+        __ATTR(type, 0444, cache_type_show, NULL);
+
+static ssize_t cache_level_show(struct kobject *k, struct kobj_attribute *attr, char *buf)
+{
+        struct cache_desc *cache = kobj_to_cache_desc(k);
+
+        return sprintf(buf, "%u\n", cache->level);
+}
+
+static struct kobj_attribute cache_level_attr =
+        __ATTR(level, 0444, cache_level_show, NULL);
+
+static ssize_t cache_assoc_show(struct kobject *k, struct kobj_attribute *attr, char *buf)
+{
+        struct cache_desc *cache = kobj_to_cache_desc(k);
+
+        return sprintf(buf, "%u\n", cache->associativity);
+}
+
+static struct kobj_attribute cache_assoc_attr =
+        __ATTR(ways_of_associativity, 0444, cache_assoc_show, NULL);
+
+struct cache_desc_info {
+        const char *type;
+        const char *size_prop;
+        const char *line_size_prop;
+        const char *nr_sets_prop;
+};
+
+/* PowerPC Processor binding says the [di]-cache-* must be equal on
+ * unified caches, so just use d-cache properties. */
+static struct cache_desc_info ucache_info = {
+        .type = "Unified",
+        .size_prop = "d-cache-size",
+        .line_size_prop = "d-cache-line-size",
+        .nr_sets_prop = "d-cache-sets",
+};
 
-static void register_cpu_online(unsigned int cpu)
+static struct cache_desc_info dcache_info = {
+        .type = "Data",
+        .size_prop = "d-cache-size",
+        .line_size_prop = "d-cache-line-size",
+        .nr_sets_prop = "d-cache-sets",
+};
+
+static struct cache_desc_info icache_info = {
+        .type = "Instruction",
+        .size_prop = "i-cache-size",
+        .line_size_prop = "i-cache-line-size",
+        .nr_sets_prop = "i-cache-sets",
+};
+
+static struct cache_desc * __cpuinit create_cache_desc(struct device_node *np, struct kobject *parent, int index, int level, struct cache_desc_info *info)
+{
+        const u32 *cache_line_size;
+        struct cache_desc *new;
+        const u32 *cache_size;
+        const u32 *nr_sets;
+        int rc;
+
+        new = kzalloc(sizeof(*new), GFP_KERNEL);
+        if (!new)
+                return NULL;
+
+        rc = kobject_init_and_add(&new->kobj, &cache_desc_type, parent,
+                                  "index%d", index);
+        if (rc)
+                goto err;
+
+        /* type */
+        new->type = info->type;
+        rc = sysfs_create_file(&new->kobj, &cache_type_attr.attr);
+        WARN_ON(rc);
+
+        /* level */
+        new->level = level;
+        rc = sysfs_create_file(&new->kobj, &cache_level_attr.attr);
+        WARN_ON(rc);
+
+        /* size */
+        cache_size = of_get_property(np, info->size_prop, NULL);
+        if (cache_size) {
+                new->size = *cache_size / 1024;
+                rc = sysfs_create_file(&new->kobj,
+                                       &cache_size_attr.attr);
+                WARN_ON(rc);
+        }
+
+        /* coherency_line_size */
+        cache_line_size = of_get_property(np, info->line_size_prop, NULL);
+        if (cache_line_size) {
+                new->line_size = *cache_line_size;
+                rc = sysfs_create_file(&new->kobj,
+                                       &cache_line_size_attr.attr);
+                WARN_ON(rc);
+        }
+
+        /* number_of_sets */
+        nr_sets = of_get_property(np, info->nr_sets_prop, NULL);
+        if (nr_sets) {
+                new->nr_sets = *nr_sets;
+                rc = sysfs_create_file(&new->kobj,
+                                       &cache_nr_sets_attr.attr);
+                WARN_ON(rc);
+        }
+
+        /* ways_of_associativity */
+        if (new->nr_sets == 1) {
+                /* fully associative */
+                new->associativity = 0;
+                goto create_assoc;
+        }
+
+        if (new->nr_sets && new->size && new->line_size) {
+                /* If we have values for all of these we can derive
+                 * the associativity. */
+                new->associativity =
+                        ((new->size * 1024) / new->nr_sets) / new->line_size;
+create_assoc:
+                rc = sysfs_create_file(&new->kobj,
+                                       &cache_assoc_attr.attr);
+                WARN_ON(rc);
+        }
+
+        return new;
+err:
+        kfree(new);
+        return NULL;
+}
+
+static bool cache_is_unified(struct device_node *np)
+{
+        return of_get_property(np, "cache-unified", NULL);
+}
+
+static struct cache_desc * __cpuinit create_cache_index_info(struct device_node *np, struct kobject *parent, int index, int level)
+{
+        const phandle *next_cache_phandle;
+        struct device_node *next_cache;
+        struct cache_desc *new, **end;
+
+        pr_debug("%s(node = %s, index = %d)\n", __func__, np->full_name, index);
+
+        if (cache_is_unified(np)) {
+                new = create_cache_desc(np, parent, index, level,
+                                        &ucache_info);
+        } else {
+                new = create_cache_desc(np, parent, index, level,
+                                        &dcache_info);
+                if (new) {
+                        index++;
+                        new->next = create_cache_desc(np, parent, index, level,
+                                                      &icache_info);
+                }
+        }
+        if (!new)
+                return NULL;
+
+        end = &new->next;
+        while (*end)
+                end = &(*end)->next;
+
+        next_cache_phandle = of_get_property(np, "l2-cache", NULL);
+        if (!next_cache_phandle)
+                goto out;
+
+        next_cache = of_find_node_by_phandle(*next_cache_phandle);
+        if (!next_cache)
+                goto out;
+
+        *end = create_cache_index_info(next_cache, parent, ++index, ++level);
+
+        of_node_put(next_cache);
+out:
+        return new;
+}
+
+static void __cpuinit create_cache_info(struct sys_device *sysdev)
+{
+        struct kobject *cache_toplevel;
+        struct device_node *np = NULL;
+        int cpu = sysdev->id;
+
+        cache_toplevel = kobject_create_and_add("cache", &sysdev->kobj);
+        if (!cache_toplevel)
+                return;
+        per_cpu(cache_toplevel, cpu) = cache_toplevel;
+        np = of_get_cpu_node(cpu, NULL);
+        if (np != NULL) {
+                per_cpu(cache_desc, cpu) =
+                        create_cache_index_info(np, cache_toplevel, 0, 1);
+                of_node_put(np);
+        }
+        return;
+}
+
+static void __cpuinit register_cpu_online(unsigned int cpu)
 {
         struct cpu *c = &per_cpu(cpu_devices, cpu);
         struct sys_device *s = &c->sysdev;
@@ -346,9 +629,33 @@ static void register_cpu_online(unsigned int cpu)
 
         if (cpu_has_feature(CPU_FTR_DSCR))
                 sysdev_create_file(s, &attr_dscr);
+
+        create_cache_info(s);
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
+static void remove_cache_info(struct sys_device *sysdev)
+{
+        struct kobject *cache_toplevel;
+        struct cache_desc *cache_desc;
+        int cpu = sysdev->id;
+
+        cache_desc = per_cpu(cache_desc, cpu);
+        if (cache_desc != NULL) {
+                sysfs_remove_file(&cache_desc->kobj, &cache_size_attr.attr);
+                sysfs_remove_file(&cache_desc->kobj, &cache_line_size_attr.attr);
+                sysfs_remove_file(&cache_desc->kobj, &cache_type_attr.attr);
+                sysfs_remove_file(&cache_desc->kobj, &cache_level_attr.attr);
+                sysfs_remove_file(&cache_desc->kobj, &cache_nr_sets_attr.attr);
+                sysfs_remove_file(&cache_desc->kobj, &cache_assoc_attr.attr);
+
+                kobject_put(&cache_desc->kobj);
+        }
+        cache_toplevel = per_cpu(cache_toplevel, cpu);
+        if (cache_toplevel != NULL)
+                kobject_put(cache_toplevel);
+}
+
 static void unregister_cpu_online(unsigned int cpu)
 {
         struct cpu *c = &per_cpu(cpu_devices, cpu);
@@ -399,6 +706,8 @@ static void unregister_cpu_online(unsigned int cpu)
 
         if (cpu_has_feature(CPU_FTR_DSCR))
                 sysdev_remove_file(s, &attr_dscr);
+
+        remove_cache_info(s);
 }
 #endif /* CONFIG_HOTPLUG_CPU */
 
diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c
index ade8aeaa2e70..22a3c33fd751 100644
--- a/arch/powerpc/kernel/vio.c
+++ b/arch/powerpc/kernel/vio.c
@@ -530,7 +530,7 @@ static dma_addr_t vio_dma_iommu_map_single(struct device *dev, void *vaddr,
         }
 
         ret = dma_iommu_ops.map_single(dev, vaddr, size, direction, attrs);
-        if (unlikely(dma_mapping_error(ret))) {
+        if (unlikely(dma_mapping_error(dev, ret))) {
                 vio_cmo_dealloc(viodev, roundup(size, IOMMU_PAGE_SIZE));
                 atomic_inc(&viodev->cmo.allocs_failed);
         }
@@ -1031,8 +1031,8 @@ void vio_cmo_set_dev_desired(struct vio_dev *viodev, size_t desired) {}
 static int vio_cmo_bus_probe(struct vio_dev *viodev) { return 0; }
 static void vio_cmo_bus_remove(struct vio_dev *viodev) {}
 static void vio_cmo_set_dma_ops(struct vio_dev *viodev) {}
-static void vio_cmo_bus_init() {}
-static void vio_cmo_sysfs_init() { }
+static void vio_cmo_bus_init(void) {}
+static void vio_cmo_sysfs_init(void) { }
 #endif /* CONFIG_PPC_SMLPAR */
 EXPORT_SYMBOL(vio_cmo_entitlement_update);
 EXPORT_SYMBOL(vio_cmo_set_dev_desired);
diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile
index 1c00e0196f6c..e7392b45a5ef 100644
--- a/arch/powerpc/mm/Makefile
+++ b/arch/powerpc/mm/Makefile
@@ -12,7 +12,8 @@ obj-y				:= fault.o mem.o \
                                    mmu_context_$(CONFIG_WORD_SIZE).o
 hash-$(CONFIG_PPC_NATIVE)       := hash_native_64.o
 obj-$(CONFIG_PPC64)             += hash_utils_64.o \
-                                   slb_low.o slb.o stab.o mmap.o $(hash-y)
+                                   slb_low.o slb.o stab.o \
+                                   gup.o mmap.o $(hash-y)
 obj-$(CONFIG_PPC_STD_MMU_32)    += ppc_mmu_32.o
 obj-$(CONFIG_PPC_STD_MMU)       += hash_low_$(CONFIG_WORD_SIZE).o \
                                    tlb_$(CONFIG_WORD_SIZE).o
diff --git a/arch/powerpc/mm/gup.c b/arch/powerpc/mm/gup.c
new file mode 100644
index 000000000000..9fdf4d6335e4
--- /dev/null
+++ b/arch/powerpc/mm/gup.c
@@ -0,0 +1,280 @@
+/*
+ * Lockless get_user_pages_fast for powerpc
+ *
+ * Copyright (C) 2008 Nick Piggin
+ * Copyright (C) 2008 Novell Inc.
+ */
+#undef DEBUG
+
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/hugetlb.h>
+#include <linux/vmstat.h>
+#include <linux/pagemap.h>
+#include <linux/rwsem.h>
+#include <asm/pgtable.h>
+
+/*
+ * The performance critical leaf functions are made noinline otherwise gcc
+ * inlines everything into a single function which results in too much
+ * register pressure.
+ */
+static noinline int gup_pte_range(pmd_t pmd, unsigned long addr,
+                unsigned long end, int write, struct page **pages, int *nr)
+{
+        unsigned long mask, result;
+        pte_t *ptep;
+
+        result = _PAGE_PRESENT|_PAGE_USER;
+        if (write)
+                result |= _PAGE_RW;
+        mask = result | _PAGE_SPECIAL;
+
+        ptep = pte_offset_kernel(&pmd, addr);
+        do {
+                pte_t pte = *ptep;
+                struct page *page;
+
+                if ((pte_val(pte) & mask) != result)
+                        return 0;
+                VM_BUG_ON(!pfn_valid(pte_pfn(pte)));
+                page = pte_page(pte);
+                if (!page_cache_get_speculative(page))
+                        return 0;
+                if (unlikely(pte != *ptep)) {
+                        put_page(page);
+                        return 0;
+                }
+                pages[*nr] = page;
+                (*nr)++;
+
+        } while (ptep++, addr += PAGE_SIZE, addr != end);
+
+        return 1;
+}
+
+#ifdef CONFIG_HUGETLB_PAGE
+static noinline int gup_huge_pte(pte_t *ptep, struct hstate *hstate,
+                                 unsigned long *addr, unsigned long end,
+                                 int write, struct page **pages, int *nr)
+{
+        unsigned long mask;
+        unsigned long pte_end;
+        struct page *head, *page;
+        pte_t pte;
+        int refs;
+
+        pte_end = (*addr + huge_page_size(hstate)) & huge_page_mask(hstate);
+        if (pte_end < end)
+                end = pte_end;
+
+        pte = *ptep;
+        mask = _PAGE_PRESENT|_PAGE_USER;
+        if (write)
+                mask |= _PAGE_RW;
+        if ((pte_val(pte) & mask) != mask)
+                return 0;
+        /* hugepages are never "special" */
+        VM_BUG_ON(!pfn_valid(pte_pfn(pte)));
+
+        refs = 0;
+        head = pte_page(pte);
+        page = head + ((*addr & ~huge_page_mask(hstate)) >> PAGE_SHIFT);
+        do {
+                VM_BUG_ON(compound_head(page) != head);
+                pages[*nr] = page;
+                (*nr)++;
+                page++;
+                refs++;
+        } while (*addr += PAGE_SIZE, *addr != end);
+
+        if (!page_cache_add_speculative(head, refs)) {
+                *nr -= refs;
+                return 0;
+        }
+        if (unlikely(pte != *ptep)) {
+                /* Could be optimized better */
+                while (*nr) {
+                        put_page(page);
+                        (*nr)--;
+                }
+        }
+
+        return 1;
+}
+#endif /* CONFIG_HUGETLB_PAGE */
+
+static int gup_pmd_range(pud_t pud, unsigned long addr, unsigned long end,
+                int write, struct page **pages, int *nr)
+{
+        unsigned long next;
+        pmd_t *pmdp;
+
+        pmdp = pmd_offset(&pud, addr);
+        do {
+                pmd_t pmd = *pmdp;
+
+                next = pmd_addr_end(addr, end);
+                if (pmd_none(pmd))
+                        return 0;
+                if (!gup_pte_range(pmd, addr, next, write, pages, nr))
+                        return 0;
+        } while (pmdp++, addr = next, addr != end);
+
+        return 1;
+}
+
+static int gup_pud_range(pgd_t pgd, unsigned long addr, unsigned long end,
+                int write, struct page **pages, int *nr)
+{
+        unsigned long next;
+        pud_t *pudp;
+
+        pudp = pud_offset(&pgd, addr);
+        do {
+                pud_t pud = *pudp;
+
+                next = pud_addr_end(addr, end);
+                if (pud_none(pud))
+                        return 0;
+                if (!gup_pmd_range(pud, addr, next, write, pages, nr))
+                        return 0;
+        } while (pudp++, addr = next, addr != end);
+
+        return 1;
+}
+
+int get_user_pages_fast(unsigned long start, int nr_pages, int write,
+                        struct page **pages)
+{
+        struct mm_struct *mm = current->mm;
+        unsigned long addr, len, end;
+        unsigned long next;
+        pgd_t *pgdp;
+        int psize, nr = 0;
+        unsigned int shift;
+
+        pr_debug("%s(%lx,%x,%s)\n", __func__, start, nr_pages, write ? "write" : "read");
+
+        start &= PAGE_MASK;
+        addr = start;
+        len = (unsigned long) nr_pages << PAGE_SHIFT;
+        end = start + len;
+
+        if (unlikely(!access_ok(write ? VERIFY_WRITE : VERIFY_READ,
+                                        start, len)))
+                goto slow_irqon;
+
+        pr_debug("  aligned: %lx .. %lx\n", start, end);
+
+#ifdef CONFIG_HUGETLB_PAGE
+        /* We bail out on slice boundary crossing when hugetlb is
+         * enabled in order to not have to deal with two different
+         * page table formats
+         */
+        if (addr < SLICE_LOW_TOP) {
+                if (end > SLICE_LOW_TOP)
+                        goto slow_irqon;
+
+                if (unlikely(GET_LOW_SLICE_INDEX(addr) !=
+                             GET_LOW_SLICE_INDEX(end - 1)))
+                        goto slow_irqon;
+        } else {
+                if (unlikely(GET_HIGH_SLICE_INDEX(addr) !=
+                             GET_HIGH_SLICE_INDEX(end - 1)))
+                        goto slow_irqon;
+        }
+#endif /* CONFIG_HUGETLB_PAGE */
+
+        /*
+         * XXX: batch / limit 'nr', to avoid large irq off latency
+         * needs some instrumenting to determine the common sizes used by
+         * important workloads (eg. DB2), and whether limiting the batch size
+         * will decrease performance.
+         *
+         * It seems like we're in the clear for the moment. Direct-IO is
+         * the main guy that batches up lots of get_user_pages, and even
+         * they are limited to 64-at-a-time which is not so many.
+         */
+        /*
+         * This doesn't prevent pagetable teardown, but does prevent
+         * the pagetables from being freed on powerpc.
+         *
+         * So long as we atomically load page table pointers versus teardown,
+         * we can follow the address down to the the page and take a ref on it.
+         */
+        local_irq_disable();
+
+        psize = get_slice_psize(mm, addr);
+        shift = mmu_psize_defs[psize].shift;
+
+#ifdef CONFIG_HUGETLB_PAGE
+        if (unlikely(mmu_huge_psizes[psize])) {
+                pte_t *ptep;
+                unsigned long a = addr;
+                unsigned long sz = ((1UL) << shift);
+                struct hstate *hstate = size_to_hstate(sz);
+
+                BUG_ON(!hstate);
+                /*
+                 * XXX: could be optimized to avoid hstate
+                 * lookup entirely (just use shift)
+                 */
+
+                do {
+                        VM_BUG_ON(shift != mmu_psize_defs[get_slice_psize(mm, a)].shift);
+                        ptep = huge_pte_offset(mm, a);
+                        pr_debug(" %016lx: huge ptep %p\n", a, ptep);
+                        if (!ptep || !gup_huge_pte(ptep, hstate, &a, end, write, pages,
+                                                   &nr))
+                                goto slow;
+                } while (a != end);
+        } else
+#endif /* CONFIG_HUGETLB_PAGE */
+        {
+                pgdp = pgd_offset(mm, addr);
+                do {
+                        pgd_t pgd = *pgdp;
+
+                        VM_BUG_ON(shift != mmu_psize_defs[get_slice_psize(mm, addr)].shift);
+                        pr_debug("  %016lx: normal pgd %p\n", addr, (void *)pgd);
+                        next = pgd_addr_end(addr, end);
+                        if (pgd_none(pgd))
+                                goto slow;
+                        if (!gup_pud_range(pgd, addr, next, write, pages, &nr))
+                                goto slow;
+                } while (pgdp++, addr = next, addr != end);
+        }
+        local_irq_enable();
+
+        VM_BUG_ON(nr != (end - start) >> PAGE_SHIFT);
+        return nr;
+
+        {
+                int ret;
+
+slow:
+                local_irq_enable();
+slow_irqon:
+                pr_debug("  slow path ! nr = %d\n", nr);
+
+                /* Try to get the remaining pages with get_user_pages */
+                start += nr << PAGE_SHIFT;
+                pages += nr;
+
+                down_read(&mm->mmap_sem);
+                ret = get_user_pages(current, mm, start,
+                        (end - start) >> PAGE_SHIFT, write, 0, pages, NULL);
+                up_read(&mm->mmap_sem);
+
+                /* Have to be a bit careful with return values */
+                if (nr > 0) {
+                        if (ret < 0)
+                                ret = nr;
+                        else
+                                ret += nr;
+                }
+
+                return ret;
+        }
+}
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index ed0aab0208a6..f1c2d55b4377 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -736,14 +736,21 @@ static int __init hugetlbpage_init(void)
 
         if (!cpu_has_feature(CPU_FTR_16M_PAGE))
                 return -ENODEV;
+
         /* Add supported huge page sizes.  Need to change HUGE_MAX_HSTATE
          * and adjust PTE_NONCACHE_NUM if the number of supported huge page
          * sizes changes.
          */
         set_huge_psize(MMU_PAGE_16M);
-        set_huge_psize(MMU_PAGE_64K);
         set_huge_psize(MMU_PAGE_16G);
 
+        /* Temporarily disable support for 64K huge pages when 64K SPU local
+         * store support is enabled as the current implementation conflicts.
+         */
+#ifndef CONFIG_SPU_FS_64K_LS
+        set_huge_psize(MMU_PAGE_64K);
+#endif
+
         for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) {
                 if (mmu_huge_psizes[psize]) {
                         huge_pgtable_cache(psize) = kmem_cache_create(
diff --git a/arch/powerpc/platforms/83xx/mpc832x_mds.c b/arch/powerpc/platforms/83xx/mpc832x_mds.c
index dd4be4aee314..ec43477caa63 100644
--- a/arch/powerpc/platforms/83xx/mpc832x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc832x_mds.c
@@ -105,6 +105,7 @@ static void __init mpc832x_sys_setup_arch(void)
 static struct of_device_id mpc832x_ids[] = {
         { .type = "soc", },
         { .compatible = "soc", },
+        { .compatible = "simple-bus", },
         { .type = "qe", },
         { .compatible = "fsl,qe", },
         {},
diff --git a/arch/powerpc/platforms/83xx/mpc832x_rdb.c b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
index f049d692d4c8..0300268ce5b8 100644
--- a/arch/powerpc/platforms/83xx/mpc832x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
@@ -115,6 +115,7 @@ static void __init mpc832x_rdb_setup_arch(void)
 static struct of_device_id mpc832x_ids[] = {
         { .type = "soc", },
         { .compatible = "soc", },
+        { .compatible = "simple-bus", },
         { .type = "qe", },
         { .compatible = "fsl,qe", },
         {},
diff --git a/arch/powerpc/platforms/83xx/mpc834x_itx.c b/arch/powerpc/platforms/83xx/mpc834x_itx.c
index 7301d77a08ee..76092d37c7d9 100644
--- a/arch/powerpc/platforms/83xx/mpc834x_itx.c
+++ b/arch/powerpc/platforms/83xx/mpc834x_itx.c
@@ -41,6 +41,7 @@
 
 static struct of_device_id __initdata mpc834x_itx_ids[] = {
         { .compatible = "fsl,pq2pro-localbus", },
+        { .compatible = "simple-bus", },
         {},
 };
 
diff --git a/arch/powerpc/platforms/83xx/mpc834x_mds.c b/arch/powerpc/platforms/83xx/mpc834x_mds.c
index 30d509aa9f08..fc3f2ed1f3e9 100644
--- a/arch/powerpc/platforms/83xx/mpc834x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc834x_mds.c
@@ -111,6 +111,7 @@ static void __init mpc834x_mds_init_IRQ(void)
 static struct of_device_id mpc834x_ids[] = {
         { .type = "soc", },
         { .compatible = "soc", },
+        { .compatible = "simple-bus", },
         {},
 };
 
diff --git a/arch/powerpc/platforms/83xx/mpc836x_mds.c b/arch/powerpc/platforms/83xx/mpc836x_mds.c
index 75b80e836576..9d46e5bdd101 100644
--- a/arch/powerpc/platforms/83xx/mpc836x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc836x_mds.c
@@ -136,6 +136,7 @@ static void __init mpc836x_mds_setup_arch(void)
 static struct of_device_id mpc836x_ids[] = {
         { .type = "soc", },
         { .compatible = "soc", },
+        { .compatible = "simple-bus", },
         { .type = "qe", },
         { .compatible = "fsl,qe", },
         {},
diff --git a/arch/powerpc/platforms/83xx/sbc834x.c b/arch/powerpc/platforms/83xx/sbc834x.c
index fc21f5c15bab..156c4e218009 100644
--- a/arch/powerpc/platforms/83xx/sbc834x.c
+++ b/arch/powerpc/platforms/83xx/sbc834x.c
@@ -83,6 +83,7 @@ static void __init sbc834x_init_IRQ(void)
 static struct __initdata of_device_id sbc834x_ids[] = {
         { .type = "soc", },
         { .compatible = "soc", },
+        { .compatible = "simple-bus", },
         {},
 };
 
diff --git a/arch/powerpc/platforms/85xx/ksi8560.c b/arch/powerpc/platforms/85xx/ksi8560.c
index 2145adeb220c..8a3b117b6ce2 100644
--- a/arch/powerpc/platforms/85xx/ksi8560.c
+++ b/arch/powerpc/platforms/85xx/ksi8560.c
@@ -222,6 +222,7 @@ static void ksi8560_show_cpuinfo(struct seq_file *m)
 
 static struct of_device_id __initdata of_bus_ids[] = {
         { .type = "soc", },
+        { .type = "simple-bus", },
         { .name = "cpm", },
         { .name = "localbus", },
         {},
diff --git a/arch/powerpc/platforms/85xx/mpc8536_ds.c b/arch/powerpc/platforms/85xx/mpc8536_ds.c
index 6b846aa1ced9..1bf5aefdfeb1 100644
--- a/arch/powerpc/platforms/85xx/mpc8536_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc8536_ds.c
@@ -91,6 +91,7 @@ static void __init mpc8536_ds_setup_arch(void)
 static struct of_device_id __initdata mpc8536_ds_ids[] = {
         { .type = "soc", },
         { .compatible = "soc", },
+        { .compatible = "simple-bus", },
         {},
 };
 
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
index ba498d6f2d02..d17807a6b89a 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
@@ -230,6 +230,7 @@ static struct of_device_id __initdata of_bus_ids[] = {
         { .type = "soc", },
         { .name = "cpm", },
         { .name = "localbus", },
+        { .compatible = "simple-bus", },
         {},
 };
 
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ds.c b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
index 00c535806647..483b65cbabae 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
@@ -186,6 +186,7 @@ static int __init mpc8544_ds_probe(void)
 static struct of_device_id __initdata mpc85xxds_ids[] = {
         { .type = "soc", },
         { .compatible = "soc", },
+        { .compatible = "simple-bus", },
         {},
 };
 
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index 43a459f63e31..2494c5155919 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -260,6 +260,7 @@ machine_arch_initcall(mpc85xx_mds, board_fixups);
 static struct of_device_id mpc85xx_ids[] = {
         { .type = "soc", },
         { .compatible = "soc", },
+        { .compatible = "simple-bus", },
         { .type = "qe", },
         { .compatible = "fsl,qe", },
         {},
diff --git a/arch/powerpc/platforms/85xx/sbc8560.c b/arch/powerpc/platforms/85xx/sbc8560.c
index 2c580cd24e4f..6509ade71668 100644
--- a/arch/powerpc/platforms/85xx/sbc8560.c
+++ b/arch/powerpc/platforms/85xx/sbc8560.c
@@ -217,6 +217,7 @@ static struct of_device_id __initdata of_bus_ids[] = {
         { .type = "soc", },
         { .name = "cpm", },
         { .name = "localbus", },
+        { .compatible = "simple-bus", },
         {},
 };
 
diff --git a/arch/powerpc/platforms/8xx/Kconfig b/arch/powerpc/platforms/8xx/Kconfig
index 6fc849e51e48..71d7562e190b 100644
--- a/arch/powerpc/platforms/8xx/Kconfig
+++ b/arch/powerpc/platforms/8xx/Kconfig
@@ -105,6 +105,16 @@ config 8xx_COPYBACK
 
           If in doubt, say Y here.
 
+config 8xx_GPIO
+        bool "GPIO API Support"
+        select GENERIC_GPIO
+        select ARCH_REQUIRE_GPIOLIB
+        help
+          Saying Y here will cause the ports on an MPC8xx processor to be used
+          with the GPIO API.  If you say N here, the kernel needs less memory.
+
+          If in doubt, say Y here.
+
 config 8xx_CPU6
         bool "CPU6 Silicon Errata (860 Pre Rev. C)"
         help
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index 1d0968775c0a..4c900efa164e 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -254,6 +254,8 @@ config CPM2
         select CPM
         select PPC_LIB_RHEAP
         select PPC_PCI_CHOICE
+        select ARCH_REQUIRE_GPIOLIB
+        select GENERIC_GPIO
         help
           The CPM2 (Communications Processor Module) is a coprocessor on
           embedded CPUs made by Freescale.  Selecting this option means that
@@ -281,6 +283,7 @@ config FSL_ULI1575
 
 config CPM
         bool
+        select PPC_CLOCK
 
 config OF_RTC
         bool
diff --git a/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c b/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c
index 69288f653144..3233fe84d158 100644
--- a/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c
+++ b/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c
@@ -96,6 +96,12 @@ static int pmi_notifier(struct notifier_block *nb,
         struct cpufreq_frequency_table *cbe_freqs;
         u8 node;
 
+        /* Should this really be called for CPUFREQ_ADJUST, CPUFREQ_INCOMPATIBLE
+         * and CPUFREQ_NOTIFY policy events?)
+         */
+        if (event == CPUFREQ_START)
+                return 0;
+
         cbe_freqs = cpufreq_frequency_get_table(policy->cpu);
         node = cbe_cpu_to_node(policy->cpu);
 
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index 31635446901a..88ccf3a08a9c 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -541,6 +541,78 @@ static int __init pmac_declare_of_platform_devices(void)
 }
 machine_device_initcall(powermac, pmac_declare_of_platform_devices);
 
+#ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE
+/*
+ * This is called very early, as part of console_init() (typically just after
+ * time_init()). This function is respondible for trying to find a good
+ * default console on serial ports. It tries to match the open firmware
+ * default output with one of the available serial console drivers.
+ */
+static int __init check_pmac_serial_console(void)
+{
+        struct device_node *prom_stdout = NULL;
+        int offset = 0;
+        const char *name;
+#ifdef CONFIG_SERIAL_PMACZILOG_TTYS
+        char *devname = "ttyS";
+#else
+        char *devname = "ttyPZ";
+#endif
+
+        pr_debug(" -> check_pmac_serial_console()\n");
+
+        /* The user has requested a console so this is already set up. */
+        if (strstr(boot_command_line, "console=")) {
+                pr_debug(" console was specified !\n");
+                return -EBUSY;
+        }
+
+        if (!of_chosen) {
+                pr_debug(" of_chosen is NULL !\n");
+                return -ENODEV;
+        }
+
+        /* We are getting a weird phandle from OF ... */
+        /* ... So use the full path instead */
+        name = of_get_property(of_chosen, "linux,stdout-path", NULL);
+        if (name == NULL) {
+                pr_debug(" no linux,stdout-path !\n");
+                return -ENODEV;
+        }
+        prom_stdout = of_find_node_by_path(name);
+        if (!prom_stdout) {
+                pr_debug(" can't find stdout package %s !\n", name);
+                return -ENODEV;
+        }
+        pr_debug("stdout is %s\n", prom_stdout->full_name);
+
+        name = of_get_property(prom_stdout, "name", NULL);
+        if (!name) {
+                pr_debug(" stdout package has no name !\n");
+                goto not_found;
+        }
+
+        if (strcmp(name, "ch-a") == 0)
+                offset = 0;
+        else if (strcmp(name, "ch-b") == 0)
+                offset = 1;
+        else
+                goto not_found;
+        of_node_put(prom_stdout);
+
+        pr_debug("Found serial console at %s%d\n", devname, offset);
+
+        return add_preferred_console(devname, offset, NULL);
+
+ not_found:
+        pr_debug("No preferred console found !\n");
+        of_node_put(prom_stdout);
+        return -ENODEV;
+}
+console_initcall(check_pmac_serial_console);
+
+#endif /* CONFIG_SERIAL_PMACZILOG_CONSOLE */
+
 /*
  * Called very early, MMU is off, device-tree isn't unflattened
  */
diff --git a/arch/powerpc/platforms/powermac/udbg_scc.c b/arch/powerpc/platforms/powermac/udbg_scc.c
index 47de4d3fc167..572771fd8463 100644
--- a/arch/powerpc/platforms/powermac/udbg_scc.c
+++ b/arch/powerpc/platforms/powermac/udbg_scc.c
@@ -125,13 +125,23 @@ void udbg_scc_init(int force_scc)
         out_8(sccc, 0xc0);
 
         /* If SCC was the OF output port, read the BRG value, else
-         * Setup for 57600 8N1
+         * Setup for 38400 or 57600 8N1 depending on the machine
          */
         if (ch_def != NULL) {
                 out_8(sccc, 13);
                 scc_inittab[1] = in_8(sccc);
                 out_8(sccc, 12);
                 scc_inittab[3] = in_8(sccc);
+        } else if (machine_is_compatible("RackMac1,1")
+                   || machine_is_compatible("RackMac1,2")
+                   || machine_is_compatible("MacRISC4")) {
+                /* Xserves and G5s default to 57600 */
+                scc_inittab[1] = 0;
+                scc_inittab[3] = 0;
+        } else {
+                /* Others default to 38400 */
+                scc_inittab[1] = 0;
+                scc_inittab[3] = 1;
         }
 
         for (i = 0; i < sizeof(scc_inittab); ++i)
diff --git a/arch/powerpc/platforms/pseries/cmm.c b/arch/powerpc/platforms/pseries/cmm.c
index c6b3be03168b..38fe32a7cc70 100644
--- a/arch/powerpc/platforms/pseries/cmm.c
+++ b/arch/powerpc/platforms/pseries/cmm.c
@@ -289,7 +289,9 @@ static int cmm_thread(void *dummy)
 }
 
 #define CMM_SHOW(name, format, args...)                 \
-        static ssize_t show_##name(struct sys_device *dev, char *buf)   \
+        static ssize_t show_##name(struct sys_device *dev,      \
+                                   struct sysdev_attribute *attr,       \
+                                   char *buf)                   \
         {                                                       \
                 return sprintf(buf, format, ##args);            \
         }                                                       \
@@ -298,12 +300,14 @@ static int cmm_thread(void *dummy)
 CMM_SHOW(loaned_kb, "%lu\n", PAGES2KB(loaned_pages));
 CMM_SHOW(loaned_target_kb, "%lu\n", PAGES2KB(loaned_pages_target));
 
-static ssize_t show_oom_pages(struct sys_device *dev, char *buf)
+static ssize_t show_oom_pages(struct sys_device *dev,
+                              struct sysdev_attribute *attr, char *buf)
 {
         return sprintf(buf, "%lu\n", PAGES2KB(oom_freed_pages));
 }
 
 static ssize_t store_oom_pages(struct sys_device *dev,
+                               struct sysdev_attribute *attr,
                                const char *buf, size_t count)
 {
         unsigned long val = simple_strtoul (buf, NULL, 10);
diff --git a/arch/powerpc/sysdev/cpm1.c b/arch/powerpc/sysdev/cpm1.c
index 661df42830b9..4a04823e8423 100644
--- a/arch/powerpc/sysdev/cpm1.c
+++ b/arch/powerpc/sysdev/cpm1.c
@@ -30,6 +30,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/module.h>
+#include <linux/spinlock.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/8xx_immap.h>
@@ -42,6 +43,10 @@
 
 #include <asm/fs_pd.h>
 
+#ifdef CONFIG_8xx_GPIO
+#include <linux/of_gpio.h>
+#endif
+
 #define CPM_MAP_SIZE    (0x4000)
 
 cpm8xx_t __iomem *cpmp;  /* Pointer to comm processor space */
@@ -290,20 +295,24 @@ struct cpm_ioport16 {
         __be16 res[3];
 };
 
-struct cpm_ioport32 {
-        __be32 dir, par, sor;
+struct cpm_ioport32b {
+        __be32 dir, par, odr, dat;
+};
+
+struct cpm_ioport32e {
+        __be32 dir, par, sor, odr, dat;
 };
 
 static void cpm1_set_pin32(int port, int pin, int flags)
 {
-        struct cpm_ioport32 __iomem *iop;
+        struct cpm_ioport32e __iomem *iop;
         pin = 1 << (31 - pin);
 
         if (port == CPM_PORTB)
-                iop = (struct cpm_ioport32 __iomem *)
+                iop = (struct cpm_ioport32e __iomem *)
                       &mpc8xx_immr->im_cpm.cp_pbdir;
         else
-                iop = (struct cpm_ioport32 __iomem *)
+                iop = (struct cpm_ioport32e __iomem *)
                       &mpc8xx_immr->im_cpm.cp_pedir;
 
         if (flags & CPM_PIN_OUTPUT)
@@ -498,3 +507,251 @@ int cpm1_clk_setup(enum cpm_clk_target target, int clock, int mode)
 
         return 0;
 }
+
+/*
+ * GPIO LIB API implementation
+ */
+#ifdef CONFIG_8xx_GPIO
+
+struct cpm1_gpio16_chip {
+        struct of_mm_gpio_chip mm_gc;
+        spinlock_t lock;
+
+        /* shadowed data register to clear/set bits safely */
+        u16 cpdata;
+};
+
+static inline struct cpm1_gpio16_chip *
+to_cpm1_gpio16_chip(struct of_mm_gpio_chip *mm_gc)
+{
+        return container_of(mm_gc, struct cpm1_gpio16_chip, mm_gc);
+}
+
+static void cpm1_gpio16_save_regs(struct of_mm_gpio_chip *mm_gc)
+{
+        struct cpm1_gpio16_chip *cpm1_gc = to_cpm1_gpio16_chip(mm_gc);
+        struct cpm_ioport16 __iomem *iop = mm_gc->regs;
+
+        cpm1_gc->cpdata = in_be16(&iop->dat);
+}
+
+static int cpm1_gpio16_get(struct gpio_chip *gc, unsigned int gpio)
+{
+        struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+        struct cpm_ioport16 __iomem *iop = mm_gc->regs;
+        u16 pin_mask;
+
+        pin_mask = 1 << (15 - gpio);
+
+        return !!(in_be16(&iop->dat) & pin_mask);
+}
+
+static void cpm1_gpio16_set(struct gpio_chip *gc, unsigned int gpio, int value)
+{
+        struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+        struct cpm1_gpio16_chip *cpm1_gc = to_cpm1_gpio16_chip(mm_gc);
+        struct cpm_ioport16 __iomem *iop = mm_gc->regs;
+        unsigned long flags;
+        u16 pin_mask = 1 << (15 - gpio);
+
+        spin_lock_irqsave(&cpm1_gc->lock, flags);
+
+        if (value)
+                cpm1_gc->cpdata |= pin_mask;
+        else
+                cpm1_gc->cpdata &= ~pin_mask;
+
+        out_be16(&iop->dat, cpm1_gc->cpdata);
+
+        spin_unlock_irqrestore(&cpm1_gc->lock, flags);
+}
+
+static int cpm1_gpio16_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+        struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+        struct cpm_ioport16 __iomem *iop = mm_gc->regs;
+        u16 pin_mask;
+
+        pin_mask = 1 << (15 - gpio);
+
+        setbits16(&iop->dir, pin_mask);
+
+        cpm1_gpio16_set(gc, gpio, val);
+
+        return 0;
+}
+
+static int cpm1_gpio16_dir_in(struct gpio_chip *gc, unsigned int gpio)
+{
+        struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+        struct cpm_ioport16 __iomem *iop = mm_gc->regs;
+        u16 pin_mask;
+
+        pin_mask = 1 << (15 - gpio);
+
+        clrbits16(&iop->dir, pin_mask);
+
+        return 0;
+}
+
+int cpm1_gpiochip_add16(struct device_node *np)
+{
+        struct cpm1_gpio16_chip *cpm1_gc;
+        struct of_mm_gpio_chip *mm_gc;
+        struct of_gpio_chip *of_gc;
+        struct gpio_chip *gc;
+
+        cpm1_gc = kzalloc(sizeof(*cpm1_gc), GFP_KERNEL);
+        if (!cpm1_gc)
+                return -ENOMEM;
+
+        spin_lock_init(&cpm1_gc->lock);
+
+        mm_gc = &cpm1_gc->mm_gc;
+        of_gc = &mm_gc->of_gc;
+        gc = &of_gc->gc;
+
+        mm_gc->save_regs = cpm1_gpio16_save_regs;
+        of_gc->gpio_cells = 2;
+        gc->ngpio = 16;
+        gc->direction_input = cpm1_gpio16_dir_in;
+        gc->direction_output = cpm1_gpio16_dir_out;
+        gc->get = cpm1_gpio16_get;
+        gc->set = cpm1_gpio16_set;
+
+        return of_mm_gpiochip_add(np, mm_gc);
+}
+
+struct cpm1_gpio32_chip {
+        struct of_mm_gpio_chip mm_gc;
+        spinlock_t lock;
+
+        /* shadowed data register to clear/set bits safely */
+        u32 cpdata;
+};
+
+static inline struct cpm1_gpio32_chip *
+to_cpm1_gpio32_chip(struct of_mm_gpio_chip *mm_gc)
+{
+        return container_of(mm_gc, struct cpm1_gpio32_chip, mm_gc);
+}
+
+static void cpm1_gpio32_save_regs(struct of_mm_gpio_chip *mm_gc)
+{
+        struct cpm1_gpio32_chip *cpm1_gc = to_cpm1_gpio32_chip(mm_gc);
+        struct cpm_ioport32b __iomem *iop = mm_gc->regs;
+
+        cpm1_gc->cpdata = in_be32(&iop->dat);
+}
+
+static int cpm1_gpio32_get(struct gpio_chip *gc, unsigned int gpio)
+{
+        struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+        struct cpm_ioport32b __iomem *iop = mm_gc->regs;
+        u32 pin_mask;
+
+        pin_mask = 1 << (31 - gpio);
+
+        return !!(in_be32(&iop->dat) & pin_mask);
+}
+
+static void cpm1_gpio32_set(struct gpio_chip *gc, unsigned int gpio, int value)
+{
+        struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+        struct cpm1_gpio32_chip *cpm1_gc = to_cpm1_gpio32_chip(mm_gc);
+        struct cpm_ioport32b __iomem *iop = mm_gc->regs;
+        unsigned long flags;
+        u32 pin_mask = 1 << (31 - gpio);
+
+        spin_lock_irqsave(&cpm1_gc->lock, flags);
+
+        if (value)
+                cpm1_gc->cpdata |= pin_mask;
+        else
+                cpm1_gc->cpdata &= ~pin_mask;
+
+        out_be32(&iop->dat, cpm1_gc->cpdata);
+
+        spin_unlock_irqrestore(&cpm1_gc->lock, flags);
+}
+
+static int cpm1_gpio32_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+        struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+        struct cpm_ioport32b __iomem *iop = mm_gc->regs;
+        u32 pin_mask;
+
+        pin_mask = 1 << (31 - gpio);
+
+        setbits32(&iop->dir, pin_mask);
+
+        cpm1_gpio32_set(gc, gpio, val);
+
+        return 0;
+}
+
+static int cpm1_gpio32_dir_in(struct gpio_chip *gc, unsigned int gpio)
+{
+        struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+        struct cpm_ioport32b __iomem *iop = mm_gc->regs;
+        u32 pin_mask;
+
+        pin_mask = 1 << (31 - gpio);
+
+        clrbits32(&iop->dir, pin_mask);
+
+        return 0;
+}
+
+int cpm1_gpiochip_add32(struct device_node *np)
+{
+        struct cpm1_gpio32_chip *cpm1_gc;
+        struct of_mm_gpio_chip *mm_gc;
+        struct of_gpio_chip *of_gc;
+        struct gpio_chip *gc;
+
+        cpm1_gc = kzalloc(sizeof(*cpm1_gc), GFP_KERNEL);
+        if (!cpm1_gc)
+                return -ENOMEM;
+
+        spin_lock_init(&cpm1_gc->lock);
+
+        mm_gc = &cpm1_gc->mm_gc;
+        of_gc = &mm_gc->of_gc;
+        gc = &of_gc->gc;
+
+        mm_gc->save_regs = cpm1_gpio32_save_regs;
+        of_gc->gpio_cells = 2;
+        gc->ngpio = 32;
+        gc->direction_input = cpm1_gpio32_dir_in;
+        gc->direction_output = cpm1_gpio32_dir_out;
+        gc->get = cpm1_gpio32_get;
+        gc->set = cpm1_gpio32_set;
+
+        return of_mm_gpiochip_add(np, mm_gc);
+}
+
+static int cpm_init_par_io(void)
+{
+        struct device_node *np;
+
+        for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-a")
+                cpm1_gpiochip_add16(np);
+
+        for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-b")
+                cpm1_gpiochip_add32(np);
+
+        for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-c")
+                cpm1_gpiochip_add16(np);
+
+        for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-d")
+                cpm1_gpiochip_add16(np);
+
+        /* Port E uses CPM2 layout */
+        for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-e")
+                cpm2_gpiochip_add32(np);
+        return 0;
+}
+arch_initcall(cpm_init_par_io);
+
+#endif /* CONFIG_8xx_GPIO */
diff --git a/arch/powerpc/sysdev/cpm2.c b/arch/powerpc/sysdev/cpm2.c
index 5a6c5dfc53ef..f1c3395633b9 100644
--- a/arch/powerpc/sysdev/cpm2.c
+++ b/arch/powerpc/sysdev/cpm2.c
@@ -115,16 +115,10 @@ EXPORT_SYMBOL(cpm_command);
  * Baud rate clocks are zero-based in the driver code (as that maps
  * to port numbers).  Documentation uses 1-based numbering.
  */
-#define BRG_INT_CLK     (get_brgfreq())
-#define BRG_UART_CLK    (BRG_INT_CLK/16)
-
-/* This function is used by UARTS, or anything else that uses a 16x
- * oversampled clock.
- */
-void
-cpm_setbrg(uint brg, uint rate)
+void __cpm2_setbrg(uint brg, uint rate, uint clk, int div16, int src)
 {
         u32 __iomem *bp;
+        u32 val;
 
         /* This is good enough to get SMCs running.....
         */
@@ -135,34 +129,14 @@ cpm_setbrg(uint brg, uint rate)
                 brg -= 4;
         }
         bp += brg;
-        out_be32(bp, (((BRG_UART_CLK / rate) - 1) << 1) | CPM_BRG_EN);
-
-        cpm2_unmap(bp);
-}
-
-/* This function is used to set high speed synchronous baud rate
- * clocks.
- */
-void
-cpm2_fastbrg(uint brg, uint rate, int div16)
-{
-        u32 __iomem *bp;
-        u32 val;
-
-        if (brg < 4) {
-                bp = cpm2_map_size(im_brgc1, 16);
-        } else {
-                bp = cpm2_map_size(im_brgc5, 16);
-                brg -= 4;
-        }
-        bp += brg;
-        val = ((BRG_INT_CLK / rate) << 1) | CPM_BRG_EN;
+        val = (((clk / rate) - 1) << 1) | CPM_BRG_EN | src;
         if (div16)
                 val |= CPM_BRG_DIV16;
 
         out_be32(bp, val);
         cpm2_unmap(bp);
 }
+EXPORT_SYMBOL(__cpm2_setbrg);
 
 int cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode)
 {
@@ -377,3 +351,14 @@ void cpm2_set_pin(int port, int pin, int flags)
         else
                 clrbits32(&iop[port].odr, pin);
 }
+
+static int cpm_init_par_io(void)
+{
+        struct device_node *np;
+
+        for_each_compatible_node(np, NULL, "fsl,cpm2-pario-bank")
+                cpm2_gpiochip_add32(np);
+        return 0;
+}
+arch_initcall(cpm_init_par_io);
+
diff --git a/arch/powerpc/sysdev/cpm_common.c b/arch/powerpc/sysdev/cpm_common.c
index e4b7296acb2c..53da8a079f96 100644
--- a/arch/powerpc/sysdev/cpm_common.c
+++ b/arch/powerpc/sysdev/cpm_common.c
@@ -19,6 +19,8 @@
 
 #include <linux/init.h>
 #include <linux/of_device.h>
+#include <linux/spinlock.h>
+#include <linux/of.h>
 
 #include <asm/udbg.h>
 #include <asm/io.h>
@@ -28,6 +30,10 @@
 
 #include <mm/mmu_decl.h>
 
+#if defined(CONFIG_CPM2) || defined(CONFIG_8xx_GPIO)
+#include <linux/of_gpio.h>
+#endif
+
 #ifdef CONFIG_PPC_EARLY_DEBUG_CPM
 static u32 __iomem *cpm_udbg_txdesc =
         (u32 __iomem __force *)CONFIG_PPC_EARLY_DEBUG_CPM_ADDR;
@@ -207,3 +213,120 @@ dma_addr_t cpm_muram_dma(void __iomem *addr)
         return muram_pbase + ((u8 __iomem *)addr - muram_vbase);
 }
 EXPORT_SYMBOL(cpm_muram_dma);
+
+#if defined(CONFIG_CPM2) || defined(CONFIG_8xx_GPIO)
+
+struct cpm2_ioports {
+        u32 dir, par, sor, odr, dat;
+        u32 res[3];
+};
+
+struct cpm2_gpio32_chip {
+        struct of_mm_gpio_chip mm_gc;
+        spinlock_t lock;
+
+        /* shadowed data register to clear/set bits safely */
+        u32 cpdata;
+};
+
+static inline struct cpm2_gpio32_chip *
+to_cpm2_gpio32_chip(struct of_mm_gpio_chip *mm_gc)
+{
+        return container_of(mm_gc, struct cpm2_gpio32_chip, mm_gc);
+}
+
+static void cpm2_gpio32_save_regs(struct of_mm_gpio_chip *mm_gc)
+{
+        struct cpm2_gpio32_chip *cpm2_gc = to_cpm2_gpio32_chip(mm_gc);
+        struct cpm2_ioports __iomem *iop = mm_gc->regs;
+
+        cpm2_gc->cpdata = in_be32(&iop->dat);
+}
+
+static int cpm2_gpio32_get(struct gpio_chip *gc, unsigned int gpio)
+{
+        struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+        struct cpm2_ioports __iomem *iop = mm_gc->regs;
+        u32 pin_mask;
+
+        pin_mask = 1 << (31 - gpio);
+
+        return !!(in_be32(&iop->dat) & pin_mask);
+}
+
+static void cpm2_gpio32_set(struct gpio_chip *gc, unsigned int gpio, int value)
+{
+        struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+        struct cpm2_gpio32_chip *cpm2_gc = to_cpm2_gpio32_chip(mm_gc);
+        struct cpm2_ioports __iomem *iop = mm_gc->regs;
+        unsigned long flags;
+        u32 pin_mask = 1 << (31 - gpio);
+
+        spin_lock_irqsave(&cpm2_gc->lock, flags);
+
+        if (value)
+                cpm2_gc->cpdata |= pin_mask;
+        else
+                cpm2_gc->cpdata &= ~pin_mask;
+
+        out_be32(&iop->dat, cpm2_gc->cpdata);
+
+        spin_unlock_irqrestore(&cpm2_gc->lock, flags);
+}
+
+static int cpm2_gpio32_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+        struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+        struct cpm2_ioports __iomem *iop = mm_gc->regs;
+        u32 pin_mask;
+
+        pin_mask = 1 << (31 - gpio);
+
+        setbits32(&iop->dir, pin_mask);
+
+        cpm2_gpio32_set(gc, gpio, val);
+
+        return 0;
+}
+
+static int cpm2_gpio32_dir_in(struct gpio_chip *gc, unsigned int gpio)
+{
+        struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+        struct cpm2_ioports __iomem *iop = mm_gc->regs;
+        u32 pin_mask;
+
+        pin_mask = 1 << (31 - gpio);
+
+        clrbits32(&iop->dir, pin_mask);
+
+        return 0;
+}
+
+int cpm2_gpiochip_add32(struct device_node *np)
+{
+        struct cpm2_gpio32_chip *cpm2_gc;
+        struct of_mm_gpio_chip *mm_gc;
+        struct of_gpio_chip *of_gc;
+        struct gpio_chip *gc;
+
+        cpm2_gc = kzalloc(sizeof(*cpm2_gc), GFP_KERNEL);
+        if (!cpm2_gc)
+                return -ENOMEM;
+
+        spin_lock_init(&cpm2_gc->lock);
+
+        mm_gc = &cpm2_gc->mm_gc;
+        of_gc = &mm_gc->of_gc;
+        gc = &of_gc->gc;
+
+        mm_gc->save_regs = cpm2_gpio32_save_regs;
+        of_gc->gpio_cells = 2;
+        gc->ngpio = 32;
+        gc->direction_input = cpm2_gpio32_dir_in;
+        gc->direction_output = cpm2_gpio32_dir_out;
+        gc->get = cpm2_gpio32_get;
+        gc->set = cpm2_gpio32_set;
+
+        return of_mm_gpiochip_add(np, mm_gc);
+}
+#endif /* CONFIG_CPM2 || CONFIG_8xx_GPIO */
diff --git a/arch/powerpc/sysdev/rtc_cmos_setup.c b/arch/powerpc/sysdev/rtc_cmos_setup.c
index c09ddc0dbeb3..c1879ebfd4f4 100644
--- a/arch/powerpc/sysdev/rtc_cmos_setup.c
+++ b/arch/powerpc/sysdev/rtc_cmos_setup.c
@@ -21,6 +21,7 @@ static int  __init add_rtc(void)
         struct device_node *np;
         struct platform_device *pd;
         struct resource res[2];
+        unsigned int num_res = 1;
         int ret;
 
         memset(&res, 0, sizeof(res));
@@ -41,14 +42,24 @@ static int  __init add_rtc(void)
         if (res[0].start != RTC_PORT(0))
                 return -EINVAL;
 
-        /* Use a fixed interrupt value of 8 since on PPC if we are using this
-         * its off an i8259 which we ensure has interrupt numbers 0..15. */
-        res[1].start = 8;
-        res[1].end = 8;
-        res[1].flags = IORESOURCE_IRQ;
+        np = of_find_compatible_node(NULL, NULL, "chrp,iic");
+        if (!np)
+                np = of_find_compatible_node(NULL, NULL, "pnpPNP,000");
+        if (np) {
+                of_node_put(np);
+                /*
+                 * Use a fixed interrupt value of 8 since on PPC if we are
+                 * using this its off an i8259 which we ensure has interrupt
+                 * numbers 0..15.
+                 */
+                res[1].start = 8;
+                res[1].end = 8;
+                res[1].flags = IORESOURCE_IRQ;
+                num_res++;
+        }
 
         pd = platform_device_register_simple("rtc_cmos", -1,
-                                             &res[0], 2);
+                                             &res[0], num_res);
 
         if (IS_ERR(pd))
                 return PTR_ERR(pd);
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 2ed88122be93..8d41908e2513 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -317,6 +317,9 @@ config ARCH_ENABLE_MEMORY_HOTPLUG
         def_bool y
         depends on SPARSEMEM
 
+config ARCH_ENABLE_MEMORY_HOTREMOVE
+        def_bool y
+
 source "mm/Kconfig"
 
 comment "I/O subsystem configuration"
diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S
index d003a6e16afb..328a20e880b5 100644
--- a/arch/s390/kernel/compat_wrapper.S
+++ b/arch/s390/kernel/compat_wrapper.S
@@ -1732,3 +1732,40 @@ compat_sys_timerfd_gettime_wrapper:
         lgfr    %r2,%r2                 # int
         llgtr   %r3,%r3                 # struct compat_itimerspec *
         jg      compat_sys_timerfd_gettime
+
+        .globl compat_sys_signalfd4_wrapper
+compat_sys_signalfd4_wrapper:
+        lgfr    %r2,%r2                 # int
+        llgtr   %r3,%r3                 # compat_sigset_t *
+        llgfr   %r4,%r4                 # compat_size_t
+        lgfr    %r5,%r5                 # int
+        jg      compat_sys_signalfd4
+
+        .globl sys_eventfd2_wrapper
+sys_eventfd2_wrapper:
+        llgfr   %r2,%r2                 # unsigned int
+        lgfr    %r3,%r3                 # int
+        jg      sys_eventfd2
+
+        .globl  sys_inotify_init1_wrapper
+sys_inotify_init1_wrapper:
+        lgfr    %r2,%r2                 # int
+        jg      sys_inotify_init1
+
+        .globl  sys_pipe2_wrapper
+sys_pipe2_wrapper:
+        llgtr   %r2,%r2                 # u32 *
+        lgfr    %r3,%r3                 # int
+        jg      sys_pipe2               # branch to system call
+
+        .globl  sys_dup3_wrapper
+sys_dup3_wrapper:
+        llgfr   %r2,%r2                 # unsigned int
+        llgfr   %r3,%r3                 # unsigned int
+        lgfr    %r4,%r4                 # int
+        jg      sys_dup3                # branch to system call
+
+        .globl  sys_epoll_create1_wrapper
+sys_epoll_create1_wrapper:
+        lgfr    %r2,%r2                 # int
+        jg      sys_epoll_create1       # branch to system call
diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c
index 54b2779b5e2f..2dcf590faba6 100644
--- a/arch/s390/kernel/ipl.c
+++ b/arch/s390/kernel/ipl.c
@@ -1705,7 +1705,10 @@ void __init setup_ipl(void)
 
 void __init ipl_update_parameters(void)
 {
-        if (diag308(DIAG308_STORE, &ipl_block) == DIAG308_RC_OK)
+        int rc;
+
+        rc = diag308(DIAG308_STORE, &ipl_block);
+        if ((rc == DIAG308_RC_OK) || (rc == DIAG308_RC_NOCONFIG))
                 diag308_set_works = 1;
 }
 
diff --git a/arch/s390/kernel/kprobes.c b/arch/s390/kernel/kprobes.c
index 4f82e5b5f879..569079ec4ff0 100644
--- a/arch/s390/kernel/kprobes.c
+++ b/arch/s390/kernel/kprobes.c
@@ -197,7 +197,7 @@ void __kprobes arch_arm_kprobe(struct kprobe *p)
         args.new = BREAKPOINT_INSTRUCTION;
 
         kcb->kprobe_status = KPROBE_SWAP_INST;
-        stop_machine_run(swap_instruction, &args, NR_CPUS);
+        stop_machine(swap_instruction, &args, NULL);
         kcb->kprobe_status = status;
 }
 
@@ -212,7 +212,7 @@ void __kprobes arch_disarm_kprobe(struct kprobe *p)
         args.new = p->opcode;
 
         kcb->kprobe_status = KPROBE_SWAP_INST;
-        stop_machine_run(swap_instruction, &args, NR_CPUS);
+        stop_machine(swap_instruction, &args, NULL);
         kcb->kprobe_status = status;
 }
 
@@ -331,7 +331,7 @@ static int __kprobes kprobe_handler(struct pt_regs *regs)
                  * No kprobe at this address. The fault has not been
                  * caused by a kprobe breakpoint. The race of breakpoint
                  * vs. kprobe remove does not exist because on s390 we
-                 * use stop_machine_run to arm/disarm the breakpoints.
+                 * use stop_machine to arm/disarm the breakpoints.
                  */
                 goto no_kprobe;
 
diff --git a/arch/s390/kernel/mem_detect.c b/arch/s390/kernel/mem_detect.c
index 18ed7abe16c5..9872999c66d1 100644
--- a/arch/s390/kernel/mem_detect.c
+++ b/arch/s390/kernel/mem_detect.c
@@ -9,27 +9,6 @@
 #include <asm/sclp.h>
 #include <asm/setup.h>
 
-static int memory_fast_detect(struct mem_chunk *chunk)
-{
-        unsigned long val0 = 0;
-        unsigned long val1 = 0xc;
-        int rc = -EOPNOTSUPP;
-
-        if (ipl_flags & IPL_NSS_VALID)
-                return -EOPNOTSUPP;
-        asm volatile(
-                "       diag    %1,%2,0x260\n"
-                "0:     lhi     %0,0\n"
-                "1:\n"
-                EX_TABLE(0b,1b)
-                : "+d" (rc), "+d" (val0), "+d" (val1) : : "cc");
-
-        if (rc || val0 != val1)
-                return -EOPNOTSUPP;
-        chunk->size = val0 + 1;
-        return 0;
-}
-
 static inline int tprot(unsigned long addr)
 {
         int rc = -EFAULT;
@@ -84,8 +63,6 @@ void detect_memory_layout(struct mem_chunk chunk[])
         unsigned long flags, cr0;
 
         memset(chunk, 0, MEMORY_CHUNKS * sizeof(struct mem_chunk));
-        if (memory_fast_detect(&chunk[0]) == 0)
-                return;
         /* Disable IRQs, DAT and low address protection so tprot does the
          * right thing and we don't get scheduled away with low address
          * protection disabled.
diff --git a/arch/s390/kernel/syscalls.S b/arch/s390/kernel/syscalls.S
index c87ec687d4c6..c66d35e55142 100644
--- a/arch/s390/kernel/syscalls.S
+++ b/arch/s390/kernel/syscalls.S
@@ -330,3 +330,9 @@ SYSCALL(sys_eventfd,sys_eventfd,sys_eventfd_wrapper)
 SYSCALL(sys_timerfd_create,sys_timerfd_create,sys_timerfd_create_wrapper)
 SYSCALL(sys_timerfd_settime,sys_timerfd_settime,compat_sys_timerfd_settime_wrapper) /* 320 */
 SYSCALL(sys_timerfd_gettime,sys_timerfd_gettime,compat_sys_timerfd_gettime_wrapper)
+SYSCALL(sys_signalfd4,sys_signalfd4,compat_sys_signalfd4_wrapper)
+SYSCALL(sys_eventfd2,sys_eventfd2,sys_eventfd2_wrapper)
+SYSCALL(sys_inotify_init1,sys_inotify_init1,sys_inotify_init1_wrapper)
+SYSCALL(sys_pipe2,sys_pipe2,sys_pipe2_wrapper) /* 325 */
+SYSCALL(sys_dup3,sys_dup3,sys_dup3_wrapper)
+SYSCALL(sys_epoll_create1,sys_epoll_create1,sys_epoll_create1_wrapper)
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index ab70d9bd9261..ca114fe46ffb 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -1348,7 +1348,7 @@ early_param("stp", early_parse_stp);
 /*
  * Reset STP attachment.
  */
-static void stp_reset(void)
+static void __init stp_reset(void)
 {
         int rc;
 
diff --git a/arch/s390/lib/delay.c b/arch/s390/lib/delay.c
index eae21a8ac72d..fc6ab6094df8 100644
--- a/arch/s390/lib/delay.c
+++ b/arch/s390/lib/delay.c
@@ -43,7 +43,7 @@ void __udelay(unsigned long usecs)
                 local_bh_disable();
         local_irq_save(flags);
         if (raw_irqs_disabled_flags(flags)) {
-                old_cc = S390_lowcore.clock_comparator;
+                old_cc = local_tick_disable();
                 S390_lowcore.clock_comparator = -1ULL;
                 __ctl_store(cr0, 0, 0);
                 dummy = (cr0 & 0xffff00e0) | 0x00000800;
@@ -65,7 +65,7 @@ void __udelay(unsigned long usecs)
 
         if (raw_irqs_disabled_flags(flags)) {
                 __ctl_load(cr0, 0, 0);
-                S390_lowcore.clock_comparator = old_cc;
+                local_tick_enable(old_cc);
         }
         if (!irq_context)
                 _local_bh_enable();
diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c
index 4993b0f594eb..1169130a97ef 100644
--- a/arch/s390/mm/init.c
+++ b/arch/s390/mm/init.c
@@ -179,7 +179,7 @@ int arch_add_memory(int nid, u64 start, u64 size)
         int rc;
 
         pgdat = NODE_DATA(nid);
-        zone = pgdat->node_zones + ZONE_NORMAL;
+        zone = pgdat->node_zones + ZONE_MOVABLE;
         rc = vmem_add_mapping(start, size);
         if (rc)
                 return rc;
@@ -189,3 +189,14 @@ int arch_add_memory(int nid, u64 start, u64 size)
         return rc;
 }
 #endif /* CONFIG_MEMORY_HOTPLUG */
+
+#ifdef CONFIG_MEMORY_HOTREMOVE
+int remove_memory(u64 start, u64 size)
+{
+        unsigned long start_pfn, end_pfn;
+
+        start_pfn = PFN_DOWN(start);
+        end_pfn = start_pfn + PFN_DOWN(size);
+        return offline_pages(start_pfn, end_pfn, 120 * HZ);
+}
+#endif /* CONFIG_MEMORY_HOTREMOVE */
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 8879938f3356..cb992c3d6b71 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -11,6 +11,7 @@ config SUPERH
         select HAVE_CLK
         select HAVE_IDE
         select HAVE_OPROFILE
+        select HAVE_GENERIC_DMA_COHERENT
         help
           The SuperH is a RISC processor targeted for use in embedded systems
           and consumer electronics; it was also used in the Sega Dreamcast
@@ -23,6 +24,11 @@ config SUPERH32
 config SUPERH64
         def_bool y if CPU_SH5
 
+config ARCH_DEFCONFIG
+        string
+        default "arch/sh/configs/shx3_defconfig" if SUPERH32
+        default "arch/sh/configs/cayman_defconfig" if SUPERH64
+
 config RWSEM_GENERIC_SPINLOCK
         def_bool y
 
@@ -347,219 +353,10 @@ config CPU_SUBTYPE_SH5_103
 endchoice
 
 source "arch/sh/mm/Kconfig"
+ 
 source "arch/sh/Kconfig.cpu"
 
-menu "Board support"
-
-config SOLUTION_ENGINE
-        bool
-
-config SH_SOLUTION_ENGINE
-        bool "SolutionEngine"
-        select SOLUTION_ENGINE
-        select CPU_HAS_IPR_IRQ
-        depends on CPU_SUBTYPE_SH7705 || CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7710 || \
-          CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7750S || \
-          CPU_SUBTYPE_SH7750R 
-        help
-          Select SolutionEngine if configuring for a Hitachi SH7705, SH7709,
-          SH7710, SH7712, SH7750, SH7750S or SH7750R evaluation board.
-
-config SH_7206_SOLUTION_ENGINE
-        bool "SolutionEngine7206"
-        select SOLUTION_ENGINE
-        depends on CPU_SUBTYPE_SH7206
-        help
-          Select 7206 SolutionEngine if configuring for a Hitachi SH7206
-          evaluation board.
-
-config SH_7619_SOLUTION_ENGINE
-        bool "SolutionEngine7619"
-        select SOLUTION_ENGINE
-        depends on CPU_SUBTYPE_SH7619
-        help
-          Select 7619 SolutionEngine if configuring for a Hitachi SH7619
-          evaluation board.
-        
-config SH_7721_SOLUTION_ENGINE
-        bool "SolutionEngine7721"
-        select SOLUTION_ENGINE
-        depends on CPU_SUBTYPE_SH7721
-        help
-          Select 7721 SolutionEngine if configuring for a Hitachi SH7721
-          evaluation board.
-
-config SH_7722_SOLUTION_ENGINE
-        bool "SolutionEngine7722"
-        select SOLUTION_ENGINE
-        depends on CPU_SUBTYPE_SH7722
-        help
-          Select 7722 SolutionEngine if configuring for a Hitachi SH772
-          evaluation board.
-
-config SH_7751_SOLUTION_ENGINE
-        bool "SolutionEngine7751"
-        select SOLUTION_ENGINE
-        select CPU_HAS_IPR_IRQ
-        depends on CPU_SUBTYPE_SH7751
-        help
-          Select 7751 SolutionEngine if configuring for a Hitachi SH7751
-          evaluation board.
-          
-config SH_7780_SOLUTION_ENGINE
-        bool "SolutionEngine7780"
-        select SOLUTION_ENGINE
-        select SYS_SUPPORTS_PCI
-        depends on CPU_SUBTYPE_SH7780
-        help
-          Select 7780 SolutionEngine if configuring for a Renesas SH7780
-          evaluation board.
-
-config SH_7343_SOLUTION_ENGINE
-        bool "SolutionEngine7343"
-        select SOLUTION_ENGINE
-        depends on CPU_SUBTYPE_SH7343
-        help
-          Select 7343 SolutionEngine if configuring for a Hitachi
-          SH7343 (SH-Mobile 3AS) evaluation board.
-
-config SH_7751_SYSTEMH
-        bool "SystemH7751R"
-        depends on CPU_SUBTYPE_SH7751R
-        help
-          Select SystemH if you are configuring for a Renesas SystemH
-          7751R evaluation board.
-
-config SH_HP6XX
-        bool "HP6XX"
-        select SYS_SUPPORTS_APM_EMULATION
-        select HD6446X_SERIES
-        depends on CPU_SUBTYPE_SH7709
-        help
-          Select HP6XX if configuring for a HP jornada HP6xx.
-          More information (hardware only) at
-          <http://www.hp.com/jornada/>.
-
-config SH_DREAMCAST
-        bool "Dreamcast"
-        select SYS_SUPPORTS_PCI
-        depends on CPU_SUBTYPE_SH7091
-        help
-          Select Dreamcast if configuring for a SEGA Dreamcast.
-          More information at <http://www.linux-sh.org>
-
-config SH_SH03
-        bool "Interface CTP/PCI-SH03"
-        depends on CPU_SUBTYPE_SH7751
-        select CPU_HAS_IPR_IRQ
-        select SYS_SUPPORTS_PCI
-        help
-          CTP/PCI-SH03 is a CPU module computer that is produced
-          by Interface Corporation.
-          More information at <http://www.interface.co.jp>
-
-config SH_SECUREEDGE5410
-        bool "SecureEdge5410"
-        depends on CPU_SUBTYPE_SH7751R
-        select CPU_HAS_IPR_IRQ
-        select SYS_SUPPORTS_PCI
-        help
-          Select SecureEdge5410 if configuring for a SnapGear SH board.
-          This includes both the OEM SecureEdge products as well as the
-          SME product line.
-
-config SH_RTS7751R2D
-        bool "RTS7751R2D"
-        depends on CPU_SUBTYPE_SH7751R
-        select SYS_SUPPORTS_PCI
-        select IO_TRAPPED
-        help
-          Select RTS7751R2D if configuring for a Renesas Technology
-          Sales SH-Graphics board.
-
-config SH_SDK7780
-        bool "SDK7780R3"
-        depends on CPU_SUBTYPE_SH7780
-        select SYS_SUPPORTS_PCI
-        help
-          Select SDK7780 if configuring for a Renesas SH7780 SDK7780R3
-          evaluation board.
-
-config SH_HIGHLANDER
-        bool "Highlander"
-        depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
-        select SYS_SUPPORTS_PCI
-        select IO_TRAPPED
-
-config SH_MIGOR
-        bool "Migo-R"
-        depends on CPU_SUBTYPE_SH7722
-        help
-          Select Migo-R if configuring for the SH7722 Migo-R platform
-          by Renesas System Solutions Asia Pte. Ltd.
-
-config SH_EDOSK7705
-        bool "EDOSK7705"
-        depends on CPU_SUBTYPE_SH7705
-
-config SH_SH4202_MICRODEV
-        bool "SH4-202 MicroDev"
-        depends on CPU_SUBTYPE_SH4_202
-        help
-          Select SH4-202 MicroDev if configuring for a SuperH MicroDev board
-          with an SH4-202 CPU.
-
-config SH_LANDISK
-        bool "LANDISK"
-        depends on CPU_SUBTYPE_SH7751R
-        select SYS_SUPPORTS_PCI
-        help
-          I-O DATA DEVICE, INC. "LANDISK Series" support.
-
-config SH_TITAN
-        bool "TITAN"
-        depends on CPU_SUBTYPE_SH7751R
-        select CPU_HAS_IPR_IRQ
-        select SYS_SUPPORTS_PCI
-        help
-          Select Titan if you are configuring for a Nimble Microsystems
-          NetEngine NP51R.
-
-config SH_SHMIN
-        bool "SHMIN"
-        depends on CPU_SUBTYPE_SH7706
-        select CPU_HAS_IPR_IRQ
-        help
-          Select SHMIN if configuring for the SHMIN board.
-
-config SH_LBOX_RE2
-        bool "L-BOX RE2"
-        depends on CPU_SUBTYPE_SH7751R
-        select SYS_SUPPORTS_PCI
-        help
-          Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2.
-
-config SH_X3PROTO
-        bool "SH-X3 Prototype board"
-        depends on CPU_SUBTYPE_SHX3
-
-config SH_MAGIC_PANEL_R2
-        bool "Magic Panel R2"
-        depends on CPU_SUBTYPE_SH7720
-        help
-          Select Magic Panel R2 if configuring for Magic Panel R2.
-
-config SH_CAYMAN
-        bool "Hitachi Cayman"
-        depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103
-        select SYS_SUPPORTS_PCI
-
-endmenu
-
-source "arch/sh/boards/renesas/rts7751r2d/Kconfig"
-source "arch/sh/boards/renesas/r7780rp/Kconfig"
-source "arch/sh/boards/renesas/sdk7780/Kconfig"
-source "arch/sh/boards/magicpanelr2/Kconfig"
+source "arch/sh/boards/Kconfig"
 
 menu "Timer and clock configuration"
 
diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index 0f4549860226..36f4b1f7066d 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -36,7 +36,8 @@ config EARLY_SCIF_CONSOLE_PORT
         default "0xff804000" if CPU_SUBTYPE_MXG
         default "0xffc30000" if CPU_SUBTYPE_SHX3
         default "0xffe00000" if CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7763 || \
-                                CPU_SUBTYPE_SH7722 || CPU_SUBTYPE_SH7366
+                                CPU_SUBTYPE_SH7722 || CPU_SUBTYPE_SH7366 || \
+                                CPU_SUBTYPE_SH7343
         default "0xffe80000" if CPU_SH4
         default "0xffea0000" if CPU_SUBTYPE_SH7785
         default "0xfffe8000" if CPU_SUBTYPE_SH7203
diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index fb7b1b15e392..25659ce74baa 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -68,7 +68,7 @@ OBJCOPYFLAGS	:= -O binary -R .note -R .note.gnu.build-id -R .comment \
 defaultimage-$(CONFIG_SUPERH32) := zImage
 
 # Set some sensible Kbuild defaults
-KBUILD_DEFCONFIG        := r7780mp_defconfig
+KBUILD_DEFCONFIG        := shx3_defconfig
 KBUILD_IMAGE            := $(defaultimage-y)
 
 #
@@ -91,47 +91,34 @@ LDFLAGS_vmlinux		+= --defsym 'jiffies=jiffies_64+4'
 LDFLAGS                 += -EB
 endif
 
-KBUILD_CFLAGS           += -pipe $(cflags-y)
-KBUILD_AFLAGS           += $(cflags-y)
-
 head-y                  := arch/sh/kernel/init_task.o
 head-$(CONFIG_SUPERH32) += arch/sh/kernel/head_32.o
 head-$(CONFIG_SUPERH64) += arch/sh/kernel/head_64.o
 
 LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
 
-core-y                          += arch/sh/kernel/ arch/sh/mm/
+core-y                          += arch/sh/kernel/ arch/sh/mm/ arch/sh/boards/
 core-$(CONFIG_SH_FPU_EMU)       += arch/sh/math-emu/
 
-# Boards
-machdir-$(CONFIG_SH_SOLUTION_ENGINE)            += se/770x
-machdir-$(CONFIG_SH_7722_SOLUTION_ENGINE)       += se/7722
-machdir-$(CONFIG_SH_7751_SOLUTION_ENGINE)       += se/7751
-machdir-$(CONFIG_SH_7780_SOLUTION_ENGINE)       += se/7780
-machdir-$(CONFIG_SH_7343_SOLUTION_ENGINE)       += se/7343
-machdir-$(CONFIG_SH_7721_SOLUTION_ENGINE)       += se/7721
-machdir-$(CONFIG_SH_HP6XX)                      += hp6xx
-machdir-$(CONFIG_SH_DREAMCAST)                  += dreamcast
-machdir-$(CONFIG_SH_SH03)                       += sh03
-machdir-$(CONFIG_SH_SECUREEDGE5410)             += snapgear
-machdir-$(CONFIG_SH_RTS7751R2D)                 += renesas/rts7751r2d
-machdir-$(CONFIG_SH_7751_SYSTEMH)               += renesas/systemh
-machdir-$(CONFIG_SH_EDOSK7705)                  += renesas/edosk7705
-machdir-$(CONFIG_SH_HIGHLANDER)                 += renesas/r7780rp
-machdir-$(CONFIG_SH_MIGOR)                      += renesas/migor
-machdir-$(CONFIG_SH_SDK7780)                    += renesas/sdk7780
-machdir-$(CONFIG_SH_X3PROTO)                    += renesas/x3proto
-machdir-$(CONFIG_SH_SH4202_MICRODEV)            += superh/microdev
-machdir-$(CONFIG_SH_LANDISK)                    += landisk
-machdir-$(CONFIG_SH_TITAN)                      += titan
-machdir-$(CONFIG_SH_SHMIN)                      += shmin
-machdir-$(CONFIG_SH_7206_SOLUTION_ENGINE)       += se/7206
-machdir-$(CONFIG_SH_7619_SOLUTION_ENGINE)       += se/7619
-machdir-$(CONFIG_SH_LBOX_RE2)                   += lboxre2
-machdir-$(CONFIG_SH_MAGIC_PANEL_R2)             += magicpanelr2
-machdir-$(CONFIG_SH_CAYMAN)                     += cayman
-
-incdir-y        := $(notdir $(machdir-y))
+# Mach groups
+machdir-$(CONFIG_SOLUTION_ENGINE)               += mach-se
+machdir-$(CONFIG_SH_HP6XX)                      += mach-hp6xx
+machdir-$(CONFIG_SH_DREAMCAST)                  += mach-dreamcast
+machdir-$(CONFIG_SH_SH03)                       += mach-sh03
+machdir-$(CONFIG_SH_SECUREEDGE5410)             += mach-snapgear
+machdir-$(CONFIG_SH_RTS7751R2D)                 += mach-r2d
+machdir-$(CONFIG_SH_7751_SYSTEMH)               += mach-systemh
+machdir-$(CONFIG_SH_EDOSK7705)                  += mach-edosk7705
+machdir-$(CONFIG_SH_HIGHLANDER)                 += mach-highlander
+machdir-$(CONFIG_SH_MIGOR)                      += mach-migor
+machdir-$(CONFIG_SH_SDK7780)                    += mach-sdk7780
+machdir-$(CONFIG_SH_X3PROTO)                    += mach-x3proto
+machdir-$(CONFIG_SH_SH7763RDP)                  += mach-sh7763rdp
+machdir-$(CONFIG_SH_SH4202_MICRODEV)            += mach-microdev
+machdir-$(CONFIG_SH_LANDISK)                    += mach-landisk
+machdir-$(CONFIG_SH_TITAN)                      += mach-titan
+machdir-$(CONFIG_SH_LBOX_RE2)                   += mach-lboxre2
+machdir-$(CONFIG_SH_CAYMAN)                     += mach-cayman
 
 ifneq ($(machdir-y),)
 core-y  += $(addprefix arch/sh/boards/, \
@@ -141,11 +128,22 @@ endif
 # Companion chips
 core-$(CONFIG_HD6446X_SERIES)   += arch/sh/cchips/hd6446x/
 
-cpuincdir-$(CONFIG_CPU_SH2)     := cpu-sh2
-cpuincdir-$(CONFIG_CPU_SH2A)    := cpu-sh2a
-cpuincdir-$(CONFIG_CPU_SH3)     := cpu-sh3
-cpuincdir-$(CONFIG_CPU_SH4)     := cpu-sh4
-cpuincdir-$(CONFIG_CPU_SH5)     := cpu-sh5
+#
+# CPU header paths
+#
+# These are ordered by optimization level. A CPU family that is a subset
+# of another (ie, SH-2A / SH-2), is picked up first, with increasing
+# levels of genericness if nothing more suitable is situated in the
+# hierarchy.
+#
+# As an example, in order of preference, SH-2A > SH-2 > common definitions.
+#
+cpuincdir-$(CONFIG_CPU_SH2A)    += cpu-sh2a
+cpuincdir-$(CONFIG_CPU_SH2)     += cpu-sh2
+cpuincdir-$(CONFIG_CPU_SH3)     += cpu-sh3
+cpuincdir-$(CONFIG_CPU_SH4)     += cpu-sh4
+cpuincdir-$(CONFIG_CPU_SH5)     += cpu-sh5
+cpuincdir-y                     += cpu-common   # Must be last
 
 libs-$(CONFIG_SUPERH32)         := arch/sh/lib/ $(libs-y)
 libs-$(CONFIG_SUPERH64)         := arch/sh/lib64/ $(libs-y)
@@ -156,57 +154,17 @@ drivers-$(CONFIG_OPROFILE)	+= arch/sh/oprofile/
 
 boot := arch/sh/boot
 
-ifneq ($(KBUILD_SRC),)
-incdir-prefix   := $(srctree)/include/asm-sh/
-else
-incdir-prefix   :=
-endif
-
-#       Update machine arch and proc symlinks if something which affects
-#       them changed.  We use .arch and .mach to indicate when they were
-#       updated last, otherwise make uses the target directory mtime.
-
-include/asm-sh/.cpu: $(wildcard include/config/cpu/*.h) \
-                     include/config/auto.conf FORCE
-        @echo '  SYMLINK include/asm-sh/cpu -> include/asm-sh/$(cpuincdir-y)'
-        $(Q)if [ ! -d include/asm-sh ]; then mkdir -p include/asm-sh; fi
-        $(Q)ln -fsn $(incdir-prefix)$(cpuincdir-y) include/asm-sh/cpu
-        @touch $@
+cflags-y        += $(foreach d, $(cpuincdir-y), -Iarch/sh/include/$(d)) \
+                   $(foreach d, $(machdir-y), -Iarch/sh/include/$(d))
 
-#       Most boards have their own mach directories.  For the ones that
-#       don't, just reference the parent directory so the semantics are
-#       kept roughly the same.
-#
-#       When multiple boards are compiled in at the same time, preference
-#       for the mach link is given to whichever has a directory for its
-#       headers. However, this is only a workaround until platforms that
-#       can live in the same kernel image back away from relying on the
-#       mach link.
-
-include/asm-sh/.mach: $(wildcard include/config/sh/*.h) \
-                      include/config/auto.conf FORCE
-        $(Q)if [ ! -d include/asm-sh ]; then mkdir -p include/asm-sh; fi
-        $(Q)rm -f include/asm-sh/mach
-        $(Q)for i in $(incdir-y); do \
-        if [ -d $(srctree)/include/asm-sh/$$i ]; then \
-                echo -n '  SYMLINK include/asm-sh/mach -> '; \
-                echo -e "include/asm-sh/$$i"; \
-                ln -fsn $(incdir-prefix)$$i \
-                        include/asm-sh/mach; \
-        else \
-                if [ ! -d include/asm-sh/mach ]; then \
-                        echo -n '  SYMLINK include/asm-sh/mach -> '; \
-                        echo -e 'include/asm-sh'; \
-                        ln -fsn $(incdir-prefix)../asm-sh include/asm-sh/mach; \
-                fi; \
-        fi; \
-        done
-        @touch $@
+KBUILD_CFLAGS           += -pipe $(cflags-y)
+KBUILD_CPPFLAGS         += $(cflags-y)
+KBUILD_AFLAGS           += $(cflags-y)
 
 PHONY += maketools FORCE
 
 maketools:  include/linux/version.h FORCE
-        $(Q)$(MAKE) $(build)=arch/sh/tools include/asm-sh/machtypes.h
+        $(Q)$(MAKE) $(build)=arch/sh/tools arch/sh/include/asm/machtypes.h
 
 all: $(KBUILD_IMAGE)
 
@@ -215,8 +173,7 @@ zImage uImage uImage.srec vmlinux.srec: vmlinux
 
 compressed: zImage
 
-archprepare: include/asm-sh/.cpu include/asm-sh/.mach maketools \
-             arch/sh/lib64/syscalltab.h
+archprepare: maketools arch/sh/lib64/syscalltab.h
 
 archclean:
         $(Q)$(MAKE) $(clean)=$(boot)
@@ -258,6 +215,4 @@ arch/sh/lib64/syscalltab.h: arch/sh/kernel/syscalls_64.S
         $(call filechk,gen-syscalltab)
 
 CLEAN_FILES += arch/sh/lib64/syscalltab.h \
-               include/asm-sh/machtypes.h \
-               include/asm-sh/cpu include/asm-sh/.cpu \
-               include/asm-sh/mach include/asm-sh/.mach
+               arch/sh/include/asm/machtypes.h
diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
new file mode 100644
index 000000000000..ae194869fd60
--- /dev/null
+++ b/arch/sh/boards/Kconfig
@@ -0,0 +1,258 @@
+menu "Board support"
+
+config SOLUTION_ENGINE
+        bool
+
+config SH_SOLUTION_ENGINE
+        bool "SolutionEngine"
+        select SOLUTION_ENGINE
+        select CPU_HAS_IPR_IRQ
+        depends on CPU_SUBTYPE_SH7705 || CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7710 || \
+          CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7750S || \
+          CPU_SUBTYPE_SH7750R 
+        help
+          Select SolutionEngine if configuring for a Hitachi SH7705, SH7709,
+          SH7710, SH7712, SH7750, SH7750S or SH7750R evaluation board.
+
+config SH_7206_SOLUTION_ENGINE
+        bool "SolutionEngine7206"
+        select SOLUTION_ENGINE
+        depends on CPU_SUBTYPE_SH7206
+        help
+          Select 7206 SolutionEngine if configuring for a Hitachi SH7206
+          evaluation board.
+
+config SH_7619_SOLUTION_ENGINE
+        bool "SolutionEngine7619"
+        select SOLUTION_ENGINE
+        depends on CPU_SUBTYPE_SH7619
+        help
+          Select 7619 SolutionEngine if configuring for a Hitachi SH7619
+          evaluation board.
+        
+config SH_7721_SOLUTION_ENGINE
+        bool "SolutionEngine7721"
+        select SOLUTION_ENGINE
+        depends on CPU_SUBTYPE_SH7721
+        help
+          Select 7721 SolutionEngine if configuring for a Hitachi SH7721
+          evaluation board.
+
+config SH_7722_SOLUTION_ENGINE
+        bool "SolutionEngine7722"
+        select SOLUTION_ENGINE
+        depends on CPU_SUBTYPE_SH7722
+        help
+          Select 7722 SolutionEngine if configuring for a Hitachi SH772
+          evaluation board.
+
+config SH_7751_SOLUTION_ENGINE
+        bool "SolutionEngine7751"
+        select SOLUTION_ENGINE
+        select CPU_HAS_IPR_IRQ
+        depends on CPU_SUBTYPE_SH7751
+        help
+          Select 7751 SolutionEngine if configuring for a Hitachi SH7751
+          evaluation board.
+          
+config SH_7780_SOLUTION_ENGINE
+        bool "SolutionEngine7780"
+        select SOLUTION_ENGINE
+        select SYS_SUPPORTS_PCI
+        depends on CPU_SUBTYPE_SH7780
+        help
+          Select 7780 SolutionEngine if configuring for a Renesas SH7780
+          evaluation board.
+
+config SH_7343_SOLUTION_ENGINE
+        bool "SolutionEngine7343"
+        select SOLUTION_ENGINE
+        depends on CPU_SUBTYPE_SH7343
+        help
+          Select 7343 SolutionEngine if configuring for a Hitachi
+          SH7343 (SH-Mobile 3AS) evaluation board.
+
+config SH_7751_SYSTEMH
+        bool "SystemH7751R"
+        depends on CPU_SUBTYPE_SH7751R
+        help
+          Select SystemH if you are configuring for a Renesas SystemH
+          7751R evaluation board.
+
+config SH_HP6XX
+        bool "HP6XX"
+        select SYS_SUPPORTS_APM_EMULATION
+        select HD6446X_SERIES
+        depends on CPU_SUBTYPE_SH7709
+        help
+          Select HP6XX if configuring for a HP jornada HP6xx.
+          More information (hardware only) at
+          <http://www.hp.com/jornada/>.
+
+config SH_DREAMCAST
+        bool "Dreamcast"
+        select SYS_SUPPORTS_PCI
+        depends on CPU_SUBTYPE_SH7091
+        help
+          Select Dreamcast if configuring for a SEGA Dreamcast.
+          More information at <http://www.linux-sh.org>
+
+config SH_SH03
+        bool "Interface CTP/PCI-SH03"
+        depends on CPU_SUBTYPE_SH7751
+        select CPU_HAS_IPR_IRQ
+        select SYS_SUPPORTS_PCI
+        help
+          CTP/PCI-SH03 is a CPU module computer that is produced
+          by Interface Corporation.
+          More information at <http://www.interface.co.jp>
+
+config SH_SECUREEDGE5410
+        bool "SecureEdge5410"
+        depends on CPU_SUBTYPE_SH7751R
+        select CPU_HAS_IPR_IRQ
+        select SYS_SUPPORTS_PCI
+        help
+          Select SecureEdge5410 if configuring for a SnapGear SH board.
+          This includes both the OEM SecureEdge products as well as the
+          SME product line.
+
+config SH_RTS7751R2D
+        bool "RTS7751R2D"
+        depends on CPU_SUBTYPE_SH7751R
+        select SYS_SUPPORTS_PCI
+        select IO_TRAPPED
+        help
+          Select RTS7751R2D if configuring for a Renesas Technology
+          Sales SH-Graphics board.
+
+config SH_RSK7203
+        bool "RSK7203"
+        depends on CPU_SUBTYPE_SH7203
+
+config SH_SDK7780
+        bool "SDK7780R3"
+        depends on CPU_SUBTYPE_SH7780
+        select SYS_SUPPORTS_PCI
+        help
+          Select SDK7780 if configuring for a Renesas SH7780 SDK7780R3
+          evaluation board.
+
+config SH_HIGHLANDER
+        bool "Highlander"
+        depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
+        select SYS_SUPPORTS_PCI
+        select IO_TRAPPED
+
+config SH_SH7785LCR
+        bool "SH7785LCR"
+        depends on CPU_SUBTYPE_SH7785
+        select SYS_SUPPORTS_PCI
+        select IO_TRAPPED
+
+config SH_SH7785LCR_29BIT_PHYSMAPS
+        bool "SH7785LCR 29bit physmaps"
+        depends on SH_SH7785LCR
+        default y
+        help
+          This board has 2 physical memory maps. It can be changed with
+          DIP switch(S2-5). If you set the DIP switch for S2-5 = ON,
+          you can access all on-board device in 29bit address mode.
+
+config SH_MIGOR
+        bool "Migo-R"
+        depends on CPU_SUBTYPE_SH7722
+        help
+          Select Migo-R if configuring for the SH7722 Migo-R platform
+          by Renesas System Solutions Asia Pte. Ltd.
+
+config SH_AP325RXA
+        bool "AP-325RXA"
+        depends on CPU_SUBTYPE_SH7723
+        help
+          Renesas "AP-325RXA" support.
+          Compatible with ALGO SYSTEM CO.,LTD. "AP-320A"
+
+config SH_SH7763RDP
+        bool "SH7763RDP"
+        depends on CPU_SUBTYPE_SH7763
+        help
+          Select SH7763RDP if configuring for a Renesas SH7763
+          evaluation board.
+
+config SH_EDOSK7705
+        bool "EDOSK7705"
+        depends on CPU_SUBTYPE_SH7705
+
+config SH_SH4202_MICRODEV
+        bool "SH4-202 MicroDev"
+        depends on CPU_SUBTYPE_SH4_202
+        help
+          Select SH4-202 MicroDev if configuring for a SuperH MicroDev board
+          with an SH4-202 CPU.
+
+config SH_LANDISK
+        bool "LANDISK"
+        depends on CPU_SUBTYPE_SH7751R
+        select SYS_SUPPORTS_PCI
+        help
+          I-O DATA DEVICE, INC. "LANDISK Series" support.
+
+config SH_TITAN
+        bool "TITAN"
+        depends on CPU_SUBTYPE_SH7751R
+        select CPU_HAS_IPR_IRQ
+        select SYS_SUPPORTS_PCI
+        help
+          Select Titan if you are configuring for a Nimble Microsystems
+          NetEngine NP51R.
+
+config SH_SHMIN
+        bool "SHMIN"
+        depends on CPU_SUBTYPE_SH7706
+        select CPU_HAS_IPR_IRQ
+        help
+          Select SHMIN if configuring for the SHMIN board.
+
+config SH_LBOX_RE2
+        bool "L-BOX RE2"
+        depends on CPU_SUBTYPE_SH7751R
+        select SYS_SUPPORTS_PCI
+        help
+          Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2.
+
+config SH_X3PROTO
+        bool "SH-X3 Prototype board"
+        depends on CPU_SUBTYPE_SHX3
+
+config SH_MAGIC_PANEL_R2
+        bool "Magic Panel R2"
+        depends on CPU_SUBTYPE_SH7720
+        help
+          Select Magic Panel R2 if configuring for Magic Panel R2.
+
+config SH_CAYMAN
+        bool "Hitachi Cayman"
+        depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103
+        select SYS_SUPPORTS_PCI
+
+endmenu
+
+source "arch/sh/boards/mach-r2d/Kconfig"
+source "arch/sh/boards/mach-highlander/Kconfig"
+source "arch/sh/boards/mach-sdk7780/Kconfig"
+source "arch/sh/boards/mach-migor/Kconfig"
+
+if SH_MAGIC_PANEL_R2
+
+menu "Magic Panel R2 options"
+
+config SH_MAGIC_PANEL_R2_VERSION
+        int SH_MAGIC_PANEL_R2_VERSION
+        default "3"
+        help
+          Set the version of the Magic Panel R2
+
+endmenu
+
+endif
diff --git a/arch/sh/boards/Makefile b/arch/sh/boards/Makefile
new file mode 100644
index 000000000000..ff9b93c5a91b
--- /dev/null
+++ b/arch/sh/boards/Makefile
@@ -0,0 +1,8 @@
+#
+# Specific board support, not covered by a mach group.
+#
+obj-$(CONFIG_SH_AP325RXA)       += board-ap325rxa.o
+obj-$(CONFIG_SH_MAGIC_PANEL_R2) += board-magicpanelr2.o
+obj-$(CONFIG_SH_RSK7203)        += board-rsk7203.o
+obj-$(CONFIG_SH_SH7785LCR)      += board-sh7785lcr.o
+obj-$(CONFIG_SH_SHMIN)          += board-shmin..o
diff --git a/arch/sh/boards/board-ap325rxa.c b/arch/sh/boards/board-ap325rxa.c
new file mode 100644
index 000000000000..9c71603d29a2
--- /dev/null
+++ b/arch/sh/boards/board-ap325rxa.c
@@ -0,0 +1,317 @@
+/*
+ * Renesas - AP-325RXA
+ * (Compatible with Algo System ., LTD. - AP-320A)
+ *
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ * Author : Yusuke Goda <goda.yuske@renesas.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/smc911x.h>
+#include <media/soc_camera_platform.h>
+#include <media/sh_mobile_ceu.h>
+#include <asm/sh_mobile_lcdc.h>
+#include <asm/io.h>
+#include <asm/clock.h>
+
+static struct smc911x_platdata smc911x_info = {
+        .flags = SMC911X_USE_32BIT,
+        .irq_flags = IRQF_TRIGGER_LOW,
+};
+
+static struct resource smc9118_resources[] = {
+        [0] = {
+                .start  = 0xb6080000,
+                .end    = 0xb60fffff,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = 35,
+                .end    = 35,
+                .flags  = IORESOURCE_IRQ,
+        }
+};
+
+static struct platform_device smc9118_device = {
+        .name           = "smc911x",
+        .id             = -1,
+        .num_resources  = ARRAY_SIZE(smc9118_resources),
+        .resource       = smc9118_resources,
+        .dev            = {
+                .platform_data = &smc911x_info,
+        },
+};
+
+static struct mtd_partition ap325rxa_nor_flash_partitions[] = {
+        {
+                 .name = "uboot",
+                 .offset = 0,
+                 .size = (1 * 1024 * 1024),
+                 .mask_flags = MTD_WRITEABLE,   /* Read-only */
+        }, {
+                 .name = "kernel",
+                 .offset = MTDPART_OFS_APPEND,
+                 .size = (2 * 1024 * 1024),
+        }, {
+                 .name = "other",
+                 .offset = MTDPART_OFS_APPEND,
+                 .size = MTDPART_SIZ_FULL,
+        },
+};
+
+static struct physmap_flash_data ap325rxa_nor_flash_data = {
+        .width          = 2,
+        .parts          = ap325rxa_nor_flash_partitions,
+        .nr_parts       = ARRAY_SIZE(ap325rxa_nor_flash_partitions),
+};
+
+static struct resource ap325rxa_nor_flash_resources[] = {
+        [0] = {
+                .name   = "NOR Flash",
+                .start  = 0x00000000,
+                .end    = 0x00ffffff,
+                .flags  = IORESOURCE_MEM,
+        }
+};
+
+static struct platform_device ap325rxa_nor_flash_device = {
+        .name           = "physmap-flash",
+        .resource       = ap325rxa_nor_flash_resources,
+        .num_resources  = ARRAY_SIZE(ap325rxa_nor_flash_resources),
+        .dev            = {
+                .platform_data = &ap325rxa_nor_flash_data,
+        },
+};
+
+#define FPGA_LCDREG     0xB4100180
+#define FPGA_BKLREG     0xB4100212
+#define FPGA_LCDREG_VAL 0x0018
+#define PORT_PHCR       0xA405010E
+#define PORT_PLCR       0xA4050114
+#define PORT_PMCR       0xA4050116
+#define PORT_PRCR       0xA405011C
+#define PORT_PSCR       0xA405011E
+#define PORT_PZCR       0xA405014C
+#define PORT_HIZCRA     0xA4050158
+#define PORT_MSELCRB    0xA4050182
+#define PORT_PSDR       0xA405013E
+#define PORT_PZDR       0xA405016C
+#define PORT_PSELD      0xA4050154
+
+static void ap320_wvga_power_on(void *board_data)
+{
+        msleep(100);
+
+        /* ASD AP-320/325 LCD ON */
+        ctrl_outw(FPGA_LCDREG_VAL, FPGA_LCDREG);
+
+        /* backlight */
+        ctrl_outw((ctrl_inw(PORT_PSCR) & ~0x00C0) | 0x40, PORT_PSCR);
+        ctrl_outb(ctrl_inb(PORT_PSDR) & ~0x08, PORT_PSDR);
+        ctrl_outw(0x100, FPGA_BKLREG);
+}
+
+static struct sh_mobile_lcdc_info lcdc_info = {
+        .clock_source = LCDC_CLK_EXTERNAL,
+        .ch[0] = {
+                .chan = LCDC_CHAN_MAINLCD,
+                .bpp = 16,
+                .interface_type = RGB18,
+                .clock_divider = 1,
+                .lcd_cfg = {
+                        .name = "LB070WV1",
+                        .xres = 800,
+                        .yres = 480,
+                        .left_margin = 40,
+                        .right_margin = 160,
+                        .hsync_len = 8,
+                        .upper_margin = 63,
+                        .lower_margin = 80,
+                        .vsync_len = 1,
+                        .sync = 0, /* hsync and vsync are active low */
+                },
+                .board_cfg = {
+                        .display_on = ap320_wvga_power_on,
+                },
+        }
+};
+
+static struct resource lcdc_resources[] = {
+        [0] = {
+                .name   = "LCDC",
+                .start  = 0xfe940000, /* P4-only space */
+                .end    = 0xfe941fff,
+                .flags  = IORESOURCE_MEM,
+        },
+};
+
+static struct platform_device lcdc_device = {
+        .name           = "sh_mobile_lcdc_fb",
+        .num_resources  = ARRAY_SIZE(lcdc_resources),
+        .resource       = lcdc_resources,
+        .dev            = {
+                .platform_data  = &lcdc_info,
+        },
+};
+
+#ifdef CONFIG_I2C
+static unsigned char camera_ncm03j_magic[] =
+{
+        0x87, 0x00, 0x88, 0x08, 0x89, 0x01, 0x8A, 0xE8,
+        0x1D, 0x00, 0x1E, 0x8A, 0x21, 0x00, 0x33, 0x36,
+        0x36, 0x60, 0x37, 0x08, 0x3B, 0x31, 0x44, 0x0F,
+        0x46, 0xF0, 0x4B, 0x28, 0x4C, 0x21, 0x4D, 0x55,
+        0x4E, 0x1B, 0x4F, 0xC7, 0x50, 0xFC, 0x51, 0x12,
+        0x58, 0x02, 0x66, 0xC0, 0x67, 0x46, 0x6B, 0xA0,
+        0x6C, 0x34, 0x7E, 0x25, 0x7F, 0x25, 0x8D, 0x0F,
+        0x92, 0x40, 0x93, 0x04, 0x94, 0x26, 0x95, 0x0A,
+        0x99, 0x03, 0x9A, 0xF0, 0x9B, 0x14, 0x9D, 0x7A,
+        0xC5, 0x02, 0xD6, 0x07, 0x59, 0x00, 0x5A, 0x1A,
+        0x5B, 0x2A, 0x5C, 0x37, 0x5D, 0x42, 0x5E, 0x56,
+        0xC8, 0x00, 0xC9, 0x1A, 0xCA, 0x2A, 0xCB, 0x37,
+        0xCC, 0x42, 0xCD, 0x56, 0xCE, 0x00, 0xCF, 0x1A,
+        0xD0, 0x2A, 0xD1, 0x37, 0xD2, 0x42, 0xD3, 0x56,
+        0x5F, 0x68, 0x60, 0x87, 0x61, 0xA3, 0x62, 0xBC,
+        0x63, 0xD4, 0x64, 0xEA, 0xD6, 0x0F,
+};
+
+static int camera_set_capture(struct soc_camera_platform_info *info,
+                              int enable)
+{
+        struct i2c_adapter *a = i2c_get_adapter(0);
+        struct i2c_msg msg;
+        int ret = 0;
+        int i;
+
+        if (!enable)
+                return 0; /* no disable for now */
+
+        for (i = 0; i < ARRAY_SIZE(camera_ncm03j_magic); i += 2) {
+                u_int8_t buf[8];
+
+                msg.addr = 0x6e;
+                msg.buf = buf;
+                msg.len = 2;
+                msg.flags = 0;
+
+                buf[0] = camera_ncm03j_magic[i];
+                buf[1] = camera_ncm03j_magic[i + 1];
+
+                ret = (ret < 0) ? ret : i2c_transfer(a, &msg, 1);
+        }
+
+        return ret;
+}
+
+static struct soc_camera_platform_info camera_info = {
+        .iface = 0,
+        .format_name = "UYVY",
+        .format_depth = 16,
+        .format = {
+                .pixelformat = V4L2_PIX_FMT_UYVY,
+                .colorspace = V4L2_COLORSPACE_SMPTE170M,
+                .width = 640,
+                .height = 480,
+        },
+        .bus_param = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH |
+        SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8,
+        .set_capture = camera_set_capture,
+};
+
+static struct platform_device camera_device = {
+        .name           = "soc_camera_platform",
+        .dev            = {
+                .platform_data  = &camera_info,
+        },
+};
+#endif /* CONFIG_I2C */
+
+static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
+        .flags = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH |
+        SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8,
+};
+
+static struct resource ceu_resources[] = {
+        [0] = {
+                .name   = "CEU",
+                .start  = 0xfe910000,
+                .end    = 0xfe91009f,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = 52,
+                .flags  = IORESOURCE_IRQ,
+        },
+        [2] = {
+                /* place holder for contiguous memory */
+        },
+};
+
+static struct platform_device ceu_device = {
+        .name           = "sh_mobile_ceu",
+        .num_resources  = ARRAY_SIZE(ceu_resources),
+        .resource       = ceu_resources,
+        .dev            = {
+                .platform_data  = &sh_mobile_ceu_info,
+        },
+};
+
+static struct platform_device *ap325rxa_devices[] __initdata = {
+        &smc9118_device,
+        &ap325rxa_nor_flash_device,
+        &lcdc_device,
+        &ceu_device,
+#ifdef CONFIG_I2C
+        &camera_device,
+#endif
+};
+
+static struct i2c_board_info __initdata ap325rxa_i2c_devices[] = {
+};
+
+static int __init ap325rxa_devices_setup(void)
+{
+        clk_always_enable("mstp200"); /* LCDC */
+        clk_always_enable("mstp203"); /* CEU */
+
+        platform_resource_setup_memory(&ceu_device, "ceu", 4 << 20);
+
+        i2c_register_board_info(0, ap325rxa_i2c_devices,
+                                ARRAY_SIZE(ap325rxa_i2c_devices));
+ 
+        return platform_add_devices(ap325rxa_devices,
+                                ARRAY_SIZE(ap325rxa_devices));
+}
+device_initcall(ap325rxa_devices_setup);
+
+static void __init ap325rxa_setup(char **cmdline_p)
+{
+        /* LCDC configuration */
+        ctrl_outw(ctrl_inw(PORT_PHCR) & ~0xffff, PORT_PHCR);
+        ctrl_outw(ctrl_inw(PORT_PLCR) & ~0xffff, PORT_PLCR);
+        ctrl_outw(ctrl_inw(PORT_PMCR) & ~0xffff, PORT_PMCR);
+        ctrl_outw(ctrl_inw(PORT_PRCR) & ~0x03ff, PORT_PRCR);
+        ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x01C0, PORT_HIZCRA);
+
+        /* CEU */
+        ctrl_outw(ctrl_inw(PORT_MSELCRB) & ~0x0001, PORT_MSELCRB);
+        ctrl_outw(ctrl_inw(PORT_PSELD) & ~0x0003, PORT_PSELD);
+        ctrl_outw((ctrl_inw(PORT_PZCR) & ~0xff00) | 0x5500, PORT_PZCR);
+        ctrl_outb((ctrl_inb(PORT_PZDR) & ~0xf0) | 0x20, PORT_PZDR);
+}
+
+static struct sh_machine_vector mv_ap325rxa __initmv = {
+        .mv_name = "AP-325RXA",
+        .mv_setup = ap325rxa_setup,
+};
diff --git a/arch/sh/boards/magicpanelr2/setup.c b/arch/sh/boards/board-magicpanelr2.c
index f3b8b07ea5d6..f3b8b07ea5d6 100644
--- a/arch/sh/boards/magicpanelr2/setup.c
+++ b/arch/sh/boards/board-magicpanelr2.c
diff --git a/arch/sh/boards/board-rsk7203.c b/arch/sh/boards/board-rsk7203.c
new file mode 100644
index 000000000000..ffbedc59a973
--- /dev/null
+++ b/arch/sh/boards/board-rsk7203.c
@@ -0,0 +1,136 @@
+/*
+ * Renesas Technology Europe RSK+ 7203 Support.
+ *
+ * Copyright (C) 2008 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/map.h>
+#include <linux/smc911x.h>
+#include <asm/machvec.h>
+#include <asm/io.h>
+
+static struct smc911x_platdata smc911x_info = {
+        .flags          = SMC911X_USE_16BIT,
+        .irq_flags      = IRQF_TRIGGER_LOW,
+};
+
+static struct resource smc911x_resources[] = {
+        [0] = {
+                .start          = 0x24000000,
+                .end            = 0x24000000 + 0x100,
+                .flags          = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start          = 64,
+                .end            = 64,
+                .flags          = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device smc911x_device = {
+        .name           = "smc911x",
+        .id             = -1,
+        .num_resources  = ARRAY_SIZE(smc911x_resources),
+        .resource       = smc911x_resources,
+        .dev            = {
+                .platform_data = &smc911x_info,
+        },
+};
+
+static const char *probes[] = { "cmdlinepart", NULL };
+
+static struct mtd_partition *parsed_partitions;
+
+static struct mtd_partition rsk7203_partitions[] = {
+        {
+                .name           = "Bootloader",
+                .offset         = 0x00000000,
+                .size           = 0x00040000,
+                .mask_flags     = MTD_WRITEABLE,
+        }, {
+                .name           = "Kernel",
+                .offset         = MTDPART_OFS_NXTBLK,
+                .size           = 0x001c0000,
+        }, {
+                .name           = "Flash_FS",
+                .offset         = MTDPART_OFS_NXTBLK,
+                .size           = MTDPART_SIZ_FULL,
+        }
+};
+
+static struct physmap_flash_data flash_data = {
+        .width          = 2,
+};
+
+static struct resource flash_resource = {
+        .start          = 0x20000000,
+        .end            = 0x20400000,
+        .flags          = IORESOURCE_MEM,
+};
+
+static struct platform_device flash_device = {
+        .name           = "physmap-flash",
+        .id             = -1,
+        .resource       = &flash_resource,
+        .num_resources  = 1,
+        .dev            = {
+                .platform_data = &flash_data,
+        },
+};
+
+static struct mtd_info *flash_mtd;
+
+static struct map_info rsk7203_flash_map = {
+        .name           = "RSK+ Flash",
+        .size           = 0x400000,
+        .bankwidth      = 2,
+};
+
+static void __init set_mtd_partitions(void)
+{
+        int nr_parts = 0;
+
+        simple_map_init(&rsk7203_flash_map);
+        flash_mtd = do_map_probe("cfi_probe", &rsk7203_flash_map);
+        nr_parts = parse_mtd_partitions(flash_mtd, probes,
+                                        &parsed_partitions, 0);
+        /* If there is no partition table, used the hard coded table */
+        if (nr_parts <= 0) {
+                flash_data.parts = rsk7203_partitions;
+                flash_data.nr_parts = ARRAY_SIZE(rsk7203_partitions);
+        } else {
+                flash_data.nr_parts = nr_parts;
+                flash_data.parts = parsed_partitions;
+        }
+}
+
+
+static struct platform_device *rsk7203_devices[] __initdata = {
+        &smc911x_device,
+        &flash_device,
+};
+
+static int __init rsk7203_devices_setup(void)
+{
+        set_mtd_partitions();
+        return platform_add_devices(rsk7203_devices,
+                                    ARRAY_SIZE(rsk7203_devices));
+}
+device_initcall(rsk7203_devices_setup);
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_rsk7203 __initmv = {
+        .mv_name        = "RSK+7203",
+};
diff --git a/arch/sh/boards/board-sh7785lcr.c b/arch/sh/boards/board-sh7785lcr.c
new file mode 100644
index 000000000000..b95d674ee704
--- /dev/null
+++ b/arch/sh/boards/board-sh7785lcr.c
@@ -0,0 +1,302 @@
+/*
+ * Renesas Technology Corp. R0P7785LC0011RL Support.
+ *
+ * Copyright (C) 2008  Yoshihiro Shimoda
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/sm501.h>
+#include <linux/sm501-regs.h>
+#include <linux/fb.h>
+#include <linux/mtd/physmap.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/i2c-pca-platform.h>
+#include <linux/i2c-algo-pca.h>
+#include <asm/heartbeat.h>
+#include <asm/sh7785lcr.h>
+
+/*
+ * NOTE: This board has 2 physical memory maps.
+ *       Please look at include/asm-sh/sh7785lcr.h or hardware manual.
+ */
+static struct resource heartbeat_resources[] = {
+        [0] = {
+                .start  = PLD_LEDCR,
+                .end    = PLD_LEDCR,
+                .flags  = IORESOURCE_MEM,
+        },
+};
+
+static struct heartbeat_data heartbeat_data = {
+        .regsize = 8,
+};
+
+static struct platform_device heartbeat_device = {
+        .name           = "heartbeat",
+        .id             = -1,
+        .dev    = {
+                .platform_data  = &heartbeat_data,
+        },
+        .num_resources  = ARRAY_SIZE(heartbeat_resources),
+        .resource       = heartbeat_resources,
+};
+
+static struct mtd_partition nor_flash_partitions[] = {
+        {
+                .name           = "loader",
+                .offset         = 0x00000000,
+                .size           = 512 * 1024,
+        },
+        {
+                .name           = "bootenv",
+                .offset         = MTDPART_OFS_APPEND,
+                .size           = 512 * 1024,
+        },
+        {
+                .name           = "kernel",
+                .offset         = MTDPART_OFS_APPEND,
+                .size           = 4 * 1024 * 1024,
+        },
+        {
+                .name           = "data",
+                .offset         = MTDPART_OFS_APPEND,
+                .size           = MTDPART_SIZ_FULL,
+        },
+};
+
+static struct physmap_flash_data nor_flash_data = {
+        .width          = 4,
+        .parts          = nor_flash_partitions,
+        .nr_parts       = ARRAY_SIZE(nor_flash_partitions),
+};
+
+static struct resource nor_flash_resources[] = {
+        [0]     = {
+                .start  = NOR_FLASH_ADDR,
+                .end    = NOR_FLASH_ADDR + NOR_FLASH_SIZE - 1,
+                .flags  = IORESOURCE_MEM,
+        }
+};
+
+static struct platform_device nor_flash_device = {
+        .name           = "physmap-flash",
+        .dev            = {
+                .platform_data  = &nor_flash_data,
+        },
+        .num_resources  = ARRAY_SIZE(nor_flash_resources),
+        .resource       = nor_flash_resources,
+};
+
+static struct resource r8a66597_usb_host_resources[] = {
+        [0] = {
+                .name   = "r8a66597_hcd",
+                .start  = R8A66597_ADDR,
+                .end    = R8A66597_ADDR + R8A66597_SIZE - 1,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .name   = "r8a66597_hcd",
+                .start  = 2,
+                .end    = 2,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device r8a66597_usb_host_device = {
+        .name           = "r8a66597_hcd",
+        .id             = -1,
+        .dev = {
+                .dma_mask               = NULL,
+                .coherent_dma_mask      = 0xffffffff,
+        },
+        .num_resources  = ARRAY_SIZE(r8a66597_usb_host_resources),
+        .resource       = r8a66597_usb_host_resources,
+};
+
+static struct resource sm501_resources[] = {
+        [0]     = {
+                .start  = SM107_MEM_ADDR,
+                .end    = SM107_MEM_ADDR + SM107_MEM_SIZE - 1,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1]     = {
+                .start  = SM107_REG_ADDR,
+                .end    = SM107_REG_ADDR + SM107_REG_SIZE - 1,
+                .flags  = IORESOURCE_MEM,
+        },
+        [2]     = {
+                .start  = 10,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct fb_videomode sm501_default_mode_crt = {
+        .pixclock       = 35714,        /* 28MHz */
+        .xres           = 640,
+        .yres           = 480,
+        .left_margin    = 105,
+        .right_margin   = 16,
+        .upper_margin   = 33,
+        .lower_margin   = 10,
+        .hsync_len      = 39,
+        .vsync_len      = 2,
+        .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+};
+
+static struct fb_videomode sm501_default_mode_pnl = {
+        .pixclock       = 40000,        /* 25MHz */
+        .xres           = 640,
+        .yres           = 480,
+        .left_margin    = 2,
+        .right_margin   = 16,
+        .upper_margin   = 33,
+        .lower_margin   = 10,
+        .hsync_len      = 39,
+        .vsync_len      = 2,
+        .sync           = 0,
+};
+
+static struct sm501_platdata_fbsub sm501_pdata_fbsub_pnl = {
+        .def_bpp        = 16,
+        .def_mode       = &sm501_default_mode_pnl,
+        .flags          = SM501FB_FLAG_USE_INIT_MODE |
+                          SM501FB_FLAG_USE_HWCURSOR |
+                          SM501FB_FLAG_USE_HWACCEL |
+                          SM501FB_FLAG_DISABLE_AT_EXIT |
+                          SM501FB_FLAG_PANEL_NO_VBIASEN,
+};
+
+static struct sm501_platdata_fbsub sm501_pdata_fbsub_crt = {
+        .def_bpp        = 16,
+        .def_mode       = &sm501_default_mode_crt,
+        .flags          = SM501FB_FLAG_USE_INIT_MODE |
+                          SM501FB_FLAG_USE_HWCURSOR |
+                          SM501FB_FLAG_USE_HWACCEL |
+                          SM501FB_FLAG_DISABLE_AT_EXIT,
+};
+
+static struct sm501_platdata_fb sm501_fb_pdata = {
+        .fb_route       = SM501_FB_OWN,
+        .fb_crt         = &sm501_pdata_fbsub_crt,
+        .fb_pnl         = &sm501_pdata_fbsub_pnl,
+};
+
+static struct sm501_initdata sm501_initdata = {
+        .gpio_high      = {
+                .set    = 0x00001fe0,
+                .mask   = 0x0,
+        },
+        .devices        = 0,
+        .mclk           = 84 * 1000000,
+        .m1xclk         = 112 * 1000000,
+};
+
+static struct sm501_platdata sm501_platform_data = {
+        .init           = &sm501_initdata,
+        .fb             = &sm501_fb_pdata,
+};
+
+static struct platform_device sm501_device = {
+        .name           = "sm501",
+        .id             = -1,
+        .dev            = {
+                .platform_data  = &sm501_platform_data,
+        },
+        .num_resources  = ARRAY_SIZE(sm501_resources),
+        .resource       = sm501_resources,
+};
+
+static struct resource i2c_resources[] = {
+        [0] = {
+                .start  = PCA9564_ADDR,
+                .end    = PCA9564_ADDR + PCA9564_SIZE - 1,
+                .flags  = IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
+        },
+        [1] = {
+                .start  = 12,
+                .end    = 12,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct i2c_pca9564_pf_platform_data i2c_platform_data = {
+        .gpio                   = 0,
+        .i2c_clock_speed        = I2C_PCA_CON_330kHz,
+        .timeout                = 100,
+};
+
+static struct platform_device i2c_device = {
+        .name           = "i2c-pca-platform",
+        .id             = -1,
+        .dev            = {
+                .platform_data  = &i2c_platform_data,
+        },
+        .num_resources  = ARRAY_SIZE(i2c_resources),
+        .resource       = i2c_resources,
+};
+
+static struct platform_device *sh7785lcr_devices[] __initdata = {
+        &heartbeat_device,
+        &nor_flash_device,
+        &r8a66597_usb_host_device,
+        &sm501_device,
+        &i2c_device,
+};
+
+static struct i2c_board_info __initdata sh7785lcr_i2c_devices[] = {
+        {
+                I2C_BOARD_INFO("r2025sd", 0x32),
+        },
+};
+
+static int __init sh7785lcr_devices_setup(void)
+{
+        i2c_register_board_info(0, sh7785lcr_i2c_devices,
+                                ARRAY_SIZE(sh7785lcr_i2c_devices));
+
+        return platform_add_devices(sh7785lcr_devices,
+                                    ARRAY_SIZE(sh7785lcr_devices));
+}
+__initcall(sh7785lcr_devices_setup);
+
+/* Initialize IRQ setting */
+void __init init_sh7785lcr_IRQ(void)
+{
+        plat_irq_setup_pins(IRQ_MODE_IRQ7654);
+        plat_irq_setup_pins(IRQ_MODE_IRQ3210);
+}
+
+static void sh7785lcr_power_off(void)
+{
+        ctrl_outb(0x01, P2SEGADDR(PLD_POFCR));
+}
+
+/* Initialize the board */
+static void __init sh7785lcr_setup(char **cmdline_p)
+{
+        void __iomem *sm501_reg;
+
+        printk(KERN_INFO "Renesas Technology Corp. R0P7785LC0011RL support.\n");
+
+        pm_power_off = sh7785lcr_power_off;
+
+        /* sm501 DRAM configuration */
+        sm501_reg = (void __iomem *)0xb3e00000 + SM501_DRAM_CONTROL;
+        writel(0x000307c2, sm501_reg);
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_sh7785lcr __initmv = {
+        .mv_name                = "SH7785LCR",
+        .mv_setup               = sh7785lcr_setup,
+        .mv_init_irq            = init_sh7785lcr_IRQ,
+};
+
diff --git a/arch/sh/boards/shmin/setup.c b/arch/sh/boards/board-shmin.c
index 16e5dae8ecfb..16e5dae8ecfb 100644
--- a/arch/sh/boards/shmin/setup.c
+++ b/arch/sh/boards/board-shmin.c
diff --git a/arch/sh/boards/cayman/irq.c b/arch/sh/boards/cayman/irq.c
deleted file mode 100644
index 30ec7bebfaf1..000000000000
--- a/arch/sh/boards/cayman/irq.c
+++ /dev/null
@@ -1,197 +0,0 @@
-/*
- * arch/sh/mach-cayman/irq.c - SH-5 Cayman Interrupt Support
- *
- * This file handles the board specific parts of the Cayman interrupt system
- *
- * Copyright (C) 2002 Stuart Menefy
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/signal.h>
-#include <asm/cpu/irq.h>
-#include <asm/page.h>
-
-/* Setup for the SMSC FDC37C935 / LAN91C100FD */
-#define SMSC_IRQ         IRQ_IRL1
-
-/* Setup for PCI Bus 2, which transmits interrupts via the EPLD */
-#define PCI2_IRQ         IRQ_IRL3
-
-unsigned long epld_virt;
-
-#define EPLD_BASE        0x04002000
-#define EPLD_STATUS_BASE (epld_virt + 0x10)
-#define EPLD_MASK_BASE   (epld_virt + 0x20)
-
-/* Note the SMSC SuperIO chip and SMSC LAN chip interrupts are all muxed onto
-   the same SH-5 interrupt */
-
-static irqreturn_t cayman_interrupt_smsc(int irq, void *dev_id)
-{
-        printk(KERN_INFO "CAYMAN: spurious SMSC interrupt\n");
-        return IRQ_NONE;
-}
-
-static irqreturn_t cayman_interrupt_pci2(int irq, void *dev_id)
-{
-        printk(KERN_INFO "CAYMAN: spurious PCI interrupt, IRQ %d\n", irq);
-        return IRQ_NONE;
-}
-
-static struct irqaction cayman_action_smsc = {
-        .name           = "Cayman SMSC Mux",
-        .handler        = cayman_interrupt_smsc,
-        .flags          = IRQF_DISABLED,
-};
-
-static struct irqaction cayman_action_pci2 = {
-        .name           = "Cayman PCI2 Mux",
-        .handler        = cayman_interrupt_pci2,
-        .flags          = IRQF_DISABLED,
-};
-
-static void enable_cayman_irq(unsigned int irq)
-{
-        unsigned long flags;
-        unsigned long mask;
-        unsigned int reg;
-        unsigned char bit;
-
-        irq -= START_EXT_IRQS;
-        reg = EPLD_MASK_BASE + ((irq / 8) << 2);
-        bit = 1<<(irq % 8);
-        local_irq_save(flags);
-        mask = ctrl_inl(reg);
-        mask |= bit;
-        ctrl_outl(mask, reg);
-        local_irq_restore(flags);
-}
-
-void disable_cayman_irq(unsigned int irq)
-{
-        unsigned long flags;
-        unsigned long mask;
-        unsigned int reg;
-        unsigned char bit;
-
-        irq -= START_EXT_IRQS;
-        reg = EPLD_MASK_BASE + ((irq / 8) << 2);
-        bit = 1<<(irq % 8);
-        local_irq_save(flags);
-        mask = ctrl_inl(reg);
-        mask &= ~bit;
-        ctrl_outl(mask, reg);
-        local_irq_restore(flags);
-}
-
-static void ack_cayman_irq(unsigned int irq)
-{
-        disable_cayman_irq(irq);
-}
-
-static void end_cayman_irq(unsigned int irq)
-{
-        if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
-                enable_cayman_irq(irq);
-}
-
-static unsigned int startup_cayman_irq(unsigned int irq)
-{
-        enable_cayman_irq(irq);
-        return 0; /* never anything pending */
-}
-
-static void shutdown_cayman_irq(unsigned int irq)
-{
-        disable_cayman_irq(irq);
-}
-
-struct hw_interrupt_type cayman_irq_type = {
-        .typename       = "Cayman-IRQ",
-        .startup        = startup_cayman_irq,
-        .shutdown       = shutdown_cayman_irq,
-        .enable         = enable_cayman_irq,
-        .disable        = disable_cayman_irq,
-        .ack            = ack_cayman_irq,
-        .end            = end_cayman_irq,
-};
-
-int cayman_irq_demux(int evt)
-{
-        int irq = intc_evt_to_irq[evt];
-
-        if (irq == SMSC_IRQ) {
-                unsigned long status;
-                int i;
-
-                status = ctrl_inl(EPLD_STATUS_BASE) &
-                         ctrl_inl(EPLD_MASK_BASE) & 0xff;
-                if (status == 0) {
-                        irq = -1;
-                } else {
-                        for (i=0; i<8; i++) {
-                                if (status & (1<<i))
-                                        break;
-                        }
-                        irq = START_EXT_IRQS + i;
-                }
-        }
-
-        if (irq == PCI2_IRQ) {
-                unsigned long status;
-                int i;
-
-                status = ctrl_inl(EPLD_STATUS_BASE + 3 * sizeof(u32)) &
-                         ctrl_inl(EPLD_MASK_BASE + 3 * sizeof(u32)) & 0xff;
-                if (status == 0) {
-                        irq = -1;
-                } else {
-                        for (i=0; i<8; i++) {
-                                if (status & (1<<i))
-                                        break;
-                        }
-                        irq = START_EXT_IRQS + (3 * 8) + i;
-                }
-        }
-
-        return irq;
-}
-
-#if defined(CONFIG_PROC_FS) && defined(CONFIG_SYSCTL)
-int cayman_irq_describe(char* p, int irq)
-{
-        if (irq < NR_INTC_IRQS) {
-                return intc_irq_describe(p, irq);
-        } else if (irq < NR_INTC_IRQS + 8) {
-                return sprintf(p, "(SMSC %d)", irq - NR_INTC_IRQS);
-        } else if ((irq >= NR_INTC_IRQS + 24) && (irq < NR_INTC_IRQS + 32)) {
-                return sprintf(p, "(PCI2 %d)", irq - (NR_INTC_IRQS + 24));
-        }
-
-        return 0;
-}
-#endif
-
-void init_cayman_irq(void)
-{
-        int i;
-
-        epld_virt = onchip_remap(EPLD_BASE, 1024, "EPLD");
-        if (!epld_virt) {
-                printk(KERN_ERR "Cayman IRQ: Unable to remap EPLD\n");
-                return;
-        }
-
-        for (i=0; i<NR_EXT_IRQS; i++) {
-                irq_desc[START_EXT_IRQS + i].chip = &cayman_irq_type;
-        }
-
-        /* Setup the SMSC interrupt */
-        setup_irq(SMSC_IRQ, &cayman_action_smsc);
-        setup_irq(PCI2_IRQ, &cayman_action_pci2);
-}
diff --git a/arch/sh/boards/cayman/setup.c b/arch/sh/boards/cayman/setup.c
deleted file mode 100644
index 8c9fa472d8f5..000000000000
--- a/arch/sh/boards/cayman/setup.c
+++ /dev/null
@@ -1,187 +0,0 @@
-/*
- * arch/sh/mach-cayman/setup.c
- *
- * SH5 Cayman support
- *
- * Copyright (C) 2002  David J. Mckay & Benedict Gaster
- * Copyright (C) 2003 - 2007  Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <asm/cpu/irq.h>
-
-/*
- * Platform Dependent Interrupt Priorities.
- */
-
-/* Using defaults defined in irq.h */
-#define RES NO_PRIORITY         /* Disabled */
-#define IR0 IRL0_PRIORITY       /* IRLs */
-#define IR1 IRL1_PRIORITY
-#define IR2 IRL2_PRIORITY
-#define IR3 IRL3_PRIORITY
-#define PCA INTA_PRIORITY       /* PCI Ints */
-#define PCB INTB_PRIORITY
-#define PCC INTC_PRIORITY
-#define PCD INTD_PRIORITY
-#define SER TOP_PRIORITY
-#define ERR TOP_PRIORITY
-#define PW0 TOP_PRIORITY
-#define PW1 TOP_PRIORITY
-#define PW2 TOP_PRIORITY
-#define PW3 TOP_PRIORITY
-#define DM0 NO_PRIORITY         /* DMA Ints */
-#define DM1 NO_PRIORITY
-#define DM2 NO_PRIORITY
-#define DM3 NO_PRIORITY
-#define DAE NO_PRIORITY
-#define TU0 TIMER_PRIORITY      /* TMU Ints */
-#define TU1 NO_PRIORITY
-#define TU2 NO_PRIORITY
-#define TI2 NO_PRIORITY
-#define ATI NO_PRIORITY         /* RTC Ints */
-#define PRI NO_PRIORITY
-#define CUI RTC_PRIORITY
-#define ERI SCIF_PRIORITY       /* SCIF Ints */
-#define RXI SCIF_PRIORITY
-#define BRI SCIF_PRIORITY
-#define TXI SCIF_PRIORITY
-#define ITI TOP_PRIORITY        /* WDT Ints */
-
-/* Setup for the SMSC FDC37C935 */
-#define SMSC_SUPERIO_BASE       0x04000000
-#define SMSC_CONFIG_PORT_ADDR   0x3f0
-#define SMSC_INDEX_PORT_ADDR    SMSC_CONFIG_PORT_ADDR
-#define SMSC_DATA_PORT_ADDR     0x3f1
-
-#define SMSC_ENTER_CONFIG_KEY   0x55
-#define SMSC_EXIT_CONFIG_KEY    0xaa
-
-#define SMCS_LOGICAL_DEV_INDEX  0x07
-#define SMSC_DEVICE_ID_INDEX    0x20
-#define SMSC_DEVICE_REV_INDEX   0x21
-#define SMSC_ACTIVATE_INDEX     0x30
-#define SMSC_PRIMARY_BASE_INDEX  0x60
-#define SMSC_SECONDARY_BASE_INDEX 0x62
-#define SMSC_PRIMARY_INT_INDEX  0x70
-#define SMSC_SECONDARY_INT_INDEX 0x72
-
-#define SMSC_IDE1_DEVICE        1
-#define SMSC_KEYBOARD_DEVICE    7
-#define SMSC_CONFIG_REGISTERS   8
-
-#define SMSC_SUPERIO_READ_INDEXED(index) ({ \
-        outb((index), SMSC_INDEX_PORT_ADDR); \
-        inb(SMSC_DATA_PORT_ADDR); })
-#define SMSC_SUPERIO_WRITE_INDEXED(val, index) ({ \
-        outb((index), SMSC_INDEX_PORT_ADDR); \
-        outb((val),   SMSC_DATA_PORT_ADDR); })
-
-#define IDE1_PRIMARY_BASE       0x01f0
-#define IDE1_SECONDARY_BASE     0x03f6
-
-unsigned long smsc_superio_virt;
-
-int platform_int_priority[NR_INTC_IRQS] = {
-        IR0, IR1, IR2, IR3, PCA, PCB, PCC, PCD, /* IRQ  0- 7 */
-        RES, RES, RES, RES, SER, ERR, PW3, PW2, /* IRQ  8-15 */
-        PW1, PW0, DM0, DM1, DM2, DM3, DAE, RES, /* IRQ 16-23 */
-        RES, RES, RES, RES, RES, RES, RES, RES, /* IRQ 24-31 */
-        TU0, TU1, TU2, TI2, ATI, PRI, CUI, ERI, /* IRQ 32-39 */
-        RXI, BRI, TXI, RES, RES, RES, RES, RES, /* IRQ 40-47 */
-        RES, RES, RES, RES, RES, RES, RES, RES, /* IRQ 48-55 */
-        RES, RES, RES, RES, RES, RES, RES, ITI, /* IRQ 56-63 */
-};
-
-static int __init smsc_superio_setup(void)
-{
-        unsigned char devid, devrev;
-
-        smsc_superio_virt = onchip_remap(SMSC_SUPERIO_BASE, 1024, "SMSC SuperIO");
-        if (!smsc_superio_virt) {
-                panic("Unable to remap SMSC SuperIO\n");
-        }
-
-        /* Initially the chip is in run state */
-        /* Put it into configuration state */
-        outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
-        outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
-
-        /* Read device ID info */
-        devid = SMSC_SUPERIO_READ_INDEXED(SMSC_DEVICE_ID_INDEX);
-        devrev = SMSC_SUPERIO_READ_INDEXED(SMSC_DEVICE_REV_INDEX);
-        printk("SMSC SuperIO devid %02x rev %02x\n", devid, devrev);
-
-        /* Select the keyboard device */
-        SMSC_SUPERIO_WRITE_INDEXED(SMSC_KEYBOARD_DEVICE, SMCS_LOGICAL_DEV_INDEX);
-
-        /* enable it */
-        SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
-
-        /* Select the interrupts */
-        /* On a PC keyboard is IRQ1, mouse is IRQ12 */
-        SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_PRIMARY_INT_INDEX);
-        SMSC_SUPERIO_WRITE_INDEXED(12, SMSC_SECONDARY_INT_INDEX);
-
-#ifdef CONFIG_IDE
-        /*
-         * Only IDE1 exists on the Cayman
-         */
-
-        /* Power it on */
-        SMSC_SUPERIO_WRITE_INDEXED(1 << SMSC_IDE1_DEVICE, 0x22);
-
-        SMSC_SUPERIO_WRITE_INDEXED(SMSC_IDE1_DEVICE, SMCS_LOGICAL_DEV_INDEX);
-        SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
-
-        SMSC_SUPERIO_WRITE_INDEXED(IDE1_PRIMARY_BASE >> 8,
-                                   SMSC_PRIMARY_BASE_INDEX + 0);
-        SMSC_SUPERIO_WRITE_INDEXED(IDE1_PRIMARY_BASE & 0xff,
-                                   SMSC_PRIMARY_BASE_INDEX + 1);
-
-        SMSC_SUPERIO_WRITE_INDEXED(IDE1_SECONDARY_BASE >> 8,
-                                   SMSC_SECONDARY_BASE_INDEX + 0);
-        SMSC_SUPERIO_WRITE_INDEXED(IDE1_SECONDARY_BASE & 0xff,
-                                   SMSC_SECONDARY_BASE_INDEX + 1);
-
-        SMSC_SUPERIO_WRITE_INDEXED(14, SMSC_PRIMARY_INT_INDEX);
-
-        SMSC_SUPERIO_WRITE_INDEXED(SMSC_CONFIG_REGISTERS,
-                                   SMCS_LOGICAL_DEV_INDEX);
-
-        SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc2); /* GP42 = nIDE1_OE */
-        SMSC_SUPERIO_WRITE_INDEXED(0x01, 0xc5); /* GP45 = IDE1_IRQ */
-        SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc6); /* GP46 = nIOROP */
-        SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc7); /* GP47 = nIOWOP */
-#endif
-
-        /* Exit the configuration state */
-        outb(SMSC_EXIT_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
-
-        return 0;
-}
-__initcall(smsc_superio_setup);
-
-static void __iomem *cayman_ioport_map(unsigned long port, unsigned int len)
-{
-        if (port < 0x400) {
-                extern unsigned long smsc_superio_virt;
-                return (void __iomem *)((port << 2) | smsc_superio_virt);
-        }
-
-        return (void __iomem *)port;
-}
-
-extern void init_cayman_irq(void);
-
-static struct sh_machine_vector mv_cayman __initmv = {
-        .mv_name                = "Hitachi Cayman",
-        .mv_nr_irqs             = 64,
-        .mv_ioport_map          = cayman_ioport_map,
-        .mv_init_irq            = init_cayman_irq,
-};
diff --git a/arch/sh/boards/dreamcast/irq.c b/arch/sh/boards/dreamcast/irq.c
deleted file mode 100644
index 9d0673a9092a..000000000000
--- a/arch/sh/boards/dreamcast/irq.c
+++ /dev/null
@@ -1,153 +0,0 @@
-/*
- * arch/sh/boards/dreamcast/irq.c
- *
- * Holly IRQ support for the Sega Dreamcast.
- *
- * Copyright (c) 2001, 2002 M. R. Brown <mrbrown@0xd6.org>
- *
- * This file is part of the LinuxDC project (www.linuxdc.org)
- * Released under the terms of the GNU GPL v2.0
- */
-
-#include <linux/irq.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/dreamcast/sysasic.h>
-
-/* Dreamcast System ASIC Hardware Events -
-
-   The Dreamcast's System ASIC (a.k.a. Holly) is responsible for receiving
-   hardware events from system peripherals and triggering an SH7750 IRQ.
-   Hardware events can trigger IRQs 13, 11, or 9 depending on which bits are
-   set in the Event Mask Registers (EMRs).  When a hardware event is
-   triggered, it's corresponding bit in the Event Status Registers (ESRs)
-   is set, and that bit should be rewritten to the ESR to acknowledge that
-   event.
-
-   There are three 32-bit ESRs located at 0xa05f8900 - 0xa05f6908.  Event
-   types can be found in include/asm-sh/dreamcast/sysasic.h. There are three
-   groups of EMRs that parallel the ESRs.  Each EMR group corresponds to an
-   IRQ, so 0xa05f6910 - 0xa05f6918 triggers IRQ 13, 0xa05f6920 - 0xa05f6928
-   triggers IRQ 11, and 0xa05f6930 - 0xa05f6938 triggers IRQ 9.
-
-   In the kernel, these events are mapped to virtual IRQs so that drivers can
-   respond to them as they would a normal interrupt.  In order to keep this
-   mapping simple, the events are mapped as:
-
-   6900/6910 - Events  0-31, IRQ 13
-   6904/6924 - Events 32-63, IRQ 11
-   6908/6938 - Events 64-95, IRQ  9
-
-*/
-
-#define ESR_BASE 0x005f6900    /* Base event status register */
-#define EMR_BASE 0x005f6910    /* Base event mask register */
-
-/* Helps us determine the EMR group that this event belongs to: 0 = 0x6910,
-   1 = 0x6920, 2 = 0x6930; also determine the event offset */
-#define LEVEL(event) (((event) - HW_EVENT_IRQ_BASE) / 32)
-
-/* Return the hardware event's bit positon within the EMR/ESR */
-#define EVENT_BIT(event) (((event) - HW_EVENT_IRQ_BASE) & 31)
-
-/* For each of these *_irq routines, the IRQ passed in is the virtual IRQ
-   (logically mapped to the corresponding bit for the hardware event). */
-
-/* Disable the hardware event by masking its bit in its EMR */
-static inline void disable_systemasic_irq(unsigned int irq)
-{
-        __u32 emr = EMR_BASE + (LEVEL(irq) << 4) + (LEVEL(irq) << 2);
-        __u32 mask;
-
-        mask = inl(emr);
-        mask &= ~(1 << EVENT_BIT(irq));
-        outl(mask, emr);
-}
-
-/* Enable the hardware event by setting its bit in its EMR */
-static inline void enable_systemasic_irq(unsigned int irq)
-{
-        __u32 emr = EMR_BASE + (LEVEL(irq) << 4) + (LEVEL(irq) << 2);
-        __u32 mask;
-
-        mask = inl(emr);
-        mask |= (1 << EVENT_BIT(irq));
-        outl(mask, emr);
-}
-
-/* Acknowledge a hardware event by writing its bit back to its ESR */
-static void ack_systemasic_irq(unsigned int irq)
-{
-        __u32 esr = ESR_BASE + (LEVEL(irq) << 2);
-        disable_systemasic_irq(irq);
-        outl((1 << EVENT_BIT(irq)), esr);
-}
-
-/* After a IRQ has been ack'd and responded to, it needs to be renabled */
-static void end_systemasic_irq(unsigned int irq)
-{
-        if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
-                enable_systemasic_irq(irq);
-}
-
-static unsigned int startup_systemasic_irq(unsigned int irq)
-{
-        enable_systemasic_irq(irq);
-
-        return 0;
-}
-
-static void shutdown_systemasic_irq(unsigned int irq)
-{
-        disable_systemasic_irq(irq);
-}
-
-struct hw_interrupt_type systemasic_int = {
-        .typename       = "System ASIC",
-        .startup        = startup_systemasic_irq,
-        .shutdown       = shutdown_systemasic_irq,
-        .enable         = enable_systemasic_irq,
-        .disable        = disable_systemasic_irq,
-        .ack            = ack_systemasic_irq,
-        .end            = end_systemasic_irq,
-};
-
-/*
- * Map the hardware event indicated by the processor IRQ to a virtual IRQ.
- */
-int systemasic_irq_demux(int irq)
-{
-        __u32 emr, esr, status, level;
-        __u32 j, bit;
-
-        switch (irq) {
-                case 13:
-                        level = 0;
-                        break;
-                case 11:
-                        level = 1;
-                        break;
-                case  9:
-                        level = 2;
-                        break;
-                default:
-                        return irq;
-        }
-        emr = EMR_BASE + (level << 4) + (level << 2);
-        esr = ESR_BASE + (level << 2);
-
-        /* Mask the ESR to filter any spurious, unwanted interrupts */
-        status = inl(esr);
-        status &= inl(emr);
-
-        /* Now scan and find the first set bit as the event to map */
-        for (bit = 1, j = 0; j < 32; bit <<= 1, j++) {
-                if (status & bit) {
-                        irq = HW_EVENT_IRQ_BASE + j + (level << 5);
-                        return irq;
-                }
-        }
-
-        /* Not reached */
-        return irq;
-}
diff --git a/arch/sh/boards/dreamcast/rtc.c b/arch/sh/boards/dreamcast/rtc.c
deleted file mode 100644
index b3a876a3b859..000000000000
--- a/arch/sh/boards/dreamcast/rtc.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * arch/sh/boards/dreamcast/rtc.c
- *
- * Dreamcast AICA RTC routines.
- *
- * Copyright (c) 2001, 2002 M. R. Brown <mrbrown@0xd6.org>
- * Copyright (c) 2002 Paul Mundt <lethal@chaoticdreams.org>
- *
- * Released under the terms of the GNU GPL v2.0.
- *
- */
-
-#include <linux/time.h>
-#include <asm/rtc.h>
-#include <asm/io.h>
-
-/* The AICA RTC has an Epoch of 1/1/1950, so we must subtract 20 years (in
-   seconds) to get the standard Unix Epoch when getting the time, and add
-   20 years when setting the time. */
-#define TWENTY_YEARS ((20 * 365LU + 5) * 86400)
-
-/* The AICA RTC is represented by a 32-bit seconds counter stored in 2 16-bit
-   registers.*/
-#define AICA_RTC_SECS_H         0xa0710000
-#define AICA_RTC_SECS_L         0xa0710004
-
-/**
- * aica_rtc_gettimeofday - Get the time from the AICA RTC
- * @ts: pointer to resulting timespec
- *
- * Grabs the current RTC seconds counter and adjusts it to the Unix Epoch.
- */
-void aica_rtc_gettimeofday(struct timespec *ts)
-{
-        unsigned long val1, val2;
-
-        do {
-                val1 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) |
-                        (ctrl_inl(AICA_RTC_SECS_L) & 0xffff);
-
-                val2 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) |
-                        (ctrl_inl(AICA_RTC_SECS_L) & 0xffff);
-        } while (val1 != val2);
-
-        ts->tv_sec = val1 - TWENTY_YEARS;
-
-        /* Can't get nanoseconds with just a seconds counter. */
-        ts->tv_nsec = 0;
-}
-
-/**
- * aica_rtc_settimeofday - Set the AICA RTC to the current time
- * @secs: contains the time_t to set
- *
- * Adjusts the given @tv to the AICA Epoch and sets the RTC seconds counter.
- */
-int aica_rtc_settimeofday(const time_t secs)
-{
-        unsigned long val1, val2;
-        unsigned long adj = secs + TWENTY_YEARS;
-
-        do {
-                ctrl_outl((adj & 0xffff0000) >> 16, AICA_RTC_SECS_H);
-                ctrl_outl((adj & 0xffff), AICA_RTC_SECS_L);
-
-                val1 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) |
-                        (ctrl_inl(AICA_RTC_SECS_L) & 0xffff);
-
-                val2 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) |
-                        (ctrl_inl(AICA_RTC_SECS_L) & 0xffff);
-        } while (val1 != val2);
-
-        return 0;
-}
-
-void aica_time_init(void)
-{
-        rtc_sh_get_time = aica_rtc_gettimeofday;
-        rtc_sh_set_time = aica_rtc_settimeofday;
-}
-
diff --git a/arch/sh/boards/dreamcast/setup.c b/arch/sh/boards/dreamcast/setup.c
deleted file mode 100644
index 2581c8cd5df7..000000000000
--- a/arch/sh/boards/dreamcast/setup.c
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * arch/sh/boards/dreamcast/setup.c
- *
- * Hardware support for the Sega Dreamcast.
- *
- * Copyright (c) 2001, 2002 M. R. Brown <mrbrown@linuxdc.org>
- * Copyright (c) 2002, 2003, 2004 Paul Mundt <lethal@linux-sh.org>
- *
- * This file is part of the LinuxDC project (www.linuxdc.org)
- *
- * Released under the terms of the GNU GPL v2.0.
- *
- * This file originally bore the message (with enclosed-$):
- *      Id: setup_dc.c,v 1.5 2001/05/24 05:09:16 mrbrown Exp
- *      SEGA Dreamcast support
- */
-
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/device.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/rtc.h>
-#include <asm/machvec.h>
-#include <asm/mach/sysasic.h>
-
-extern struct hw_interrupt_type systemasic_int;
-extern void aica_time_init(void);
-extern int gapspci_init(void);
-extern int systemasic_irq_demux(int);
-
-static void __init dreamcast_setup(char **cmdline_p)
-{
-        int i;
-
-        /* Mask all hardware events */
-        /* XXX */
-
-        /* Acknowledge any previous events */
-        /* XXX */
-
-        __set_io_port_base(0xa0000000);
-
-        /* Assign all virtual IRQs to the System ASIC int. handler */
-        for (i = HW_EVENT_IRQ_BASE; i < HW_EVENT_IRQ_MAX; i++)
-                irq_desc[i].chip = &systemasic_int;
-
-        board_time_init = aica_time_init;
-
-#ifdef CONFIG_PCI
-        if (gapspci_init() < 0)
-                printk(KERN_WARNING "GAPSPCI was not detected.\n");
-#endif
-}
-
-static struct sh_machine_vector mv_dreamcast __initmv = {
-        .mv_name                = "Sega Dreamcast",
-        .mv_setup               = dreamcast_setup,
-        .mv_irq_demux           = systemasic_irq_demux,
-};
diff --git a/arch/sh/boards/hp6xx/pm.c b/arch/sh/boards/hp6xx/pm.c
deleted file mode 100644
index d22f6eac9cca..000000000000
--- a/arch/sh/boards/hp6xx/pm.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * hp6x0 Power Management Routines
- *
- * Copyright (c) 2006 Andriy Skulysh <askulsyh@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License.
- */
-#include <linux/init.h>
-#include <linux/suspend.h>
-#include <linux/errno.h>
-#include <linux/time.h>
-#include <asm/io.h>
-#include <asm/hd64461.h>
-#include <asm/hp6xx.h>
-#include <asm/cpu/dac.h>
-#include <asm/pm.h>
-
-#define STBCR           0xffffff82
-#define STBCR2          0xffffff88
-
-static int hp6x0_pm_enter(suspend_state_t state)
-{
-        u8 stbcr, stbcr2;
-#ifdef CONFIG_HD64461_ENABLER
-        u8 scr;
-        u16 hd64461_stbcr;
-#endif
-
-#ifdef CONFIG_HD64461_ENABLER
-        outb(0, HD64461_PCC1CSCIER);
-
-        scr = inb(HD64461_PCC1SCR);
-        scr |= HD64461_PCCSCR_VCC1;
-        outb(scr, HD64461_PCC1SCR);
-
-        hd64461_stbcr = inw(HD64461_STBCR);
-        hd64461_stbcr |= HD64461_STBCR_SPC1ST;
-        outw(hd64461_stbcr, HD64461_STBCR);
-#endif
-
-        ctrl_outb(0x1f, DACR);
-
-        stbcr = ctrl_inb(STBCR);
-        ctrl_outb(0x01, STBCR);
-
-        stbcr2 = ctrl_inb(STBCR2);
-        ctrl_outb(0x7f , STBCR2);
-
-        outw(0xf07f, HD64461_SCPUCR);
-
-        pm_enter();
-
-        outw(0, HD64461_SCPUCR);
-        ctrl_outb(stbcr, STBCR);
-        ctrl_outb(stbcr2, STBCR2);
-
-#ifdef CONFIG_HD64461_ENABLER
-        hd64461_stbcr = inw(HD64461_STBCR);
-        hd64461_stbcr &= ~HD64461_STBCR_SPC1ST;
-        outw(hd64461_stbcr, HD64461_STBCR);
-
-        outb(0x4c, HD64461_PCC1CSCIER);
-        outb(0x00, HD64461_PCC1CSCR);
-#endif
-
-        return 0;
-}
-
-static struct platform_suspend_ops hp6x0_pm_ops = {
-        .enter          = hp6x0_pm_enter,
-        .valid          = suspend_valid_only_mem,
-};
-
-static int __init hp6x0_pm_init(void)
-{
-        suspend_set_ops(&hp6x0_pm_ops);
-        return 0;
-}
-
-late_initcall(hp6x0_pm_init);
diff --git a/arch/sh/boards/hp6xx/pm_wakeup.S b/arch/sh/boards/hp6xx/pm_wakeup.S
deleted file mode 100644
index 45e9bf0b9115..000000000000
--- a/arch/sh/boards/hp6xx/pm_wakeup.S
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * Copyright (c) 2006 Andriy Skulysh <askulsyh@gmail.com>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- */
-
-#include <linux/linkage.h>
-#include <asm/cpu/mmu_context.h>
-
-#define k0      r0
-#define k1      r1
-#define k2      r2
-#define k3      r3
-#define k4      r4
-
-/*
- * Kernel mode register usage:
- *      k0      scratch
- *      k1      scratch
- *      k2      scratch (Exception code)
- *      k3      scratch (Return address)
- *      k4      scratch
- *      k5      reserved
- *      k6      Global Interrupt Mask (0--15 << 4)
- *      k7      CURRENT_THREAD_INFO (pointer to current thread info)
- */
-
-ENTRY(wakeup_start)
-! clear STBY bit
-        mov     #-126, k2
-        and     #127, k0
-        mov.b   k0, @k2
-! enable refresh
-        mov.l   5f, k1
-        mov.w   6f, k0
-        mov.w   k0, @k1
-! jump to handler
-        mov.l   2f, k2
-        mov.l   3f, k3
-        mov.l   @k2, k2
-
-        mov.l   4f, k1
-        jmp     @k1
-        nop
-
-        .align  2
-1:      .long   EXPEVT
-2:      .long   INTEVT
-3:      .long   ret_from_irq
-4:      .long   handle_exception
-5:      .long   0xffffff68
-6:      .word   0x0524
-
-ENTRY(wakeup_end)
-        nop
diff --git a/arch/sh/boards/hp6xx/setup.c b/arch/sh/boards/hp6xx/setup.c
deleted file mode 100644
index 2f414ac3c690..000000000000
--- a/arch/sh/boards/hp6xx/setup.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * linux/arch/sh/boards/hp6xx/setup.c
- *
- * Copyright (C) 2002 Andriy Skulysh
- * Copyright (C) 2007 Kristoffer Ericson <Kristoffer_e1@hotmail.com>
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * Setup code for HP620/HP660/HP680/HP690 (internal peripherials only)
- */
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <asm/hd64461.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/hp6xx.h>
-#include <asm/cpu/dac.h>
-
-#define SCPCR   0xa4000116
-#define SCPDR   0xa4000136
-
-/* CF Slot */
-static struct resource cf_ide_resources[] = {
-        [0] = {
-                .start = 0x15000000 + 0x1f0,
-                .end   = 0x15000000 + 0x1f0 + 0x08 - 0x01,
-                .flags = IORESOURCE_MEM,
-        },
-        [1] = {
-                .start = 0x15000000 + 0x1fe,
-                .end   = 0x15000000 + 0x1fe + 0x01,
-                .flags = IORESOURCE_MEM,
-        },
-        [2] = {
-                .start = 77,
-                .flags = IORESOURCE_IRQ,
-        },
-};
-
-static struct platform_device cf_ide_device = {
-        .name           =  "pata_platform",
-        .id             =  -1,
-        .num_resources  = ARRAY_SIZE(cf_ide_resources),
-        .resource       = cf_ide_resources,
-};
-
-static struct platform_device jornadakbd_device = {
-        .name           = "jornada680_kbd",
-        .id             = -1,
-};
-
-static struct platform_device *hp6xx_devices[] __initdata = {
-        &cf_ide_device,
-        &jornadakbd_device,
-};
-
-static void __init hp6xx_init_irq(void)
-{
-        /* Gets touchscreen and powerbutton IRQ working */
-        plat_irq_setup_pins(IRQ_MODE_IRQ);
-}
-
-static int __init hp6xx_devices_setup(void)
-{
-        return platform_add_devices(hp6xx_devices, ARRAY_SIZE(hp6xx_devices));
-}
-
-static void __init hp6xx_setup(char **cmdline_p)
-{
-        u8 v8;
-        u16 v;
-
-        v = inw(HD64461_STBCR);
-        v |=    HD64461_STBCR_SURTST | HD64461_STBCR_SIRST      |
-                HD64461_STBCR_STM1ST | HD64461_STBCR_STM0ST     |
-                HD64461_STBCR_SAFEST | HD64461_STBCR_SPC0ST     |
-                HD64461_STBCR_SMIAST | HD64461_STBCR_SAFECKE_OST|
-                HD64461_STBCR_SAFECKE_IST;
-#ifndef CONFIG_HD64461_ENABLER
-        v |= HD64461_STBCR_SPC1ST;
-#endif
-        outw(v, HD64461_STBCR);
-        v = inw(HD64461_GPADR);
-        v |= HD64461_GPADR_SPEAKER | HD64461_GPADR_PCMCIA0;
-        outw(v, HD64461_GPADR);
-
-        outw(HD64461_PCCGCR_VCC0 | HD64461_PCCSCR_VCC1, HD64461_PCC0GCR);
-
-#ifndef CONFIG_HD64461_ENABLER
-        outw(HD64461_PCCGCR_VCC0 | HD64461_PCCSCR_VCC1, HD64461_PCC1GCR);
-#endif
-
-        sh_dac_output(0, DAC_SPEAKER_VOLUME);
-        sh_dac_disable(DAC_SPEAKER_VOLUME);
-        v8 = ctrl_inb(DACR);
-        v8 &= ~DACR_DAE;
-        ctrl_outb(v8,DACR);
-
-        v8 = ctrl_inb(SCPDR);
-        v8 |= SCPDR_TS_SCAN_X | SCPDR_TS_SCAN_Y;
-        v8 &= ~SCPDR_TS_SCAN_ENABLE;
-        ctrl_outb(v8, SCPDR);
-
-        v = ctrl_inw(SCPCR);
-        v &= ~SCPCR_TS_MASK;
-        v |= SCPCR_TS_ENABLE;
-        ctrl_outw(v, SCPCR);
-}
-device_initcall(hp6xx_devices_setup);
-
-static struct sh_machine_vector mv_hp6xx __initmv = {
-        .mv_name = "hp6xx",
-        .mv_setup = hp6xx_setup,
-        /* IRQ's : CPU(64) + CCHIP(16) + FREE_TO_USE(6) */
-        .mv_nr_irqs = HD64461_IRQBASE + HD64461_IRQ_NUM + 6,
-        .mv_irq_demux = hd64461_irq_demux,
-        /* Enable IRQ0 -> IRQ3 in IRQ_MODE */
-        .mv_init_irq = hp6xx_init_irq,
-};
diff --git a/arch/sh/boards/landisk/gio.c b/arch/sh/boards/landisk/gio.c
deleted file mode 100644
index 0c15b0a50b99..000000000000
--- a/arch/sh/boards/landisk/gio.c
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * arch/sh/boards/landisk/gio.c - driver for landisk
- *
- * This driver will also support the I-O DATA Device, Inc. LANDISK Board.
- * LANDISK and USL-5P Button, LED and GIO driver drive function.
- *
- *   Copylight (C) 2006 kogiidena
- *   Copylight (C) 2002 Atom Create Engineering Co., Ltd. *
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- */
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/smp_lock.h>
-#include <linux/kdev_t.h>
-#include <linux/cdev.h>
-#include <linux/fs.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
-#include <asm/landisk/gio.h>
-#include <asm/landisk/iodata_landisk.h>
-
-#define DEVCOUNT                4
-#define GIO_MINOR               2       /* GIO minor no. */
-
-static dev_t dev;
-static struct cdev *cdev_p;
-static int openCnt;
-
-static int gio_open(struct inode *inode, struct file *filp)
-{
-        int minor;
-        int ret = -ENOENT;
-
-        lock_kernel();
-        minor = MINOR(inode->i_rdev);
-        if (minor < DEVCOUNT) {
-                if (openCnt > 0) {
-                        ret = -EALREADY;
-                } else {
-                        openCnt++;
-                        ret = 0;
-                }
-        }
-        unlock_kernel();
-        return ret;
-}
-
-static int gio_close(struct inode *inode, struct file *filp)
-{
-        int minor;
-
-        minor = MINOR(inode->i_rdev);
-        if (minor < DEVCOUNT) {
-                openCnt--;
-        }
-        return 0;
-}
-
-static int gio_ioctl(struct inode *inode, struct file *filp,
-                             unsigned int cmd, unsigned long arg)
-{
-        unsigned int data;
-        static unsigned int addr = 0;
-
-        if (cmd & 0x01) {       /* write */
-                if (copy_from_user(&data, (int *)arg, sizeof(int))) {
-                        return -EFAULT;
-                }
-        }
-
-        switch (cmd) {
-        case GIODRV_IOCSGIOSETADDR:     /* address set */
-                addr = data;
-                break;
-
-        case GIODRV_IOCSGIODATA1:       /* write byte */
-                ctrl_outb((unsigned char)(0x0ff & data), addr);
-                break;
-
-        case GIODRV_IOCSGIODATA2:       /* write word */
-                if (addr & 0x01) {
-                        return -EFAULT;
-                }
-                ctrl_outw((unsigned short int)(0x0ffff & data), addr);
-                break;
-
-        case GIODRV_IOCSGIODATA4:       /* write long */
-                if (addr & 0x03) {
-                        return -EFAULT;
-                }
-                ctrl_outl(data, addr);
-                break;
-
-        case GIODRV_IOCGGIODATA1:       /* read byte */
-                data = ctrl_inb(addr);
-                break;
-
-        case GIODRV_IOCGGIODATA2:       /* read word */
-                if (addr & 0x01) {
-                        return -EFAULT;
-                }
-                data = ctrl_inw(addr);
-                break;
-
-        case GIODRV_IOCGGIODATA4:       /* read long */
-                if (addr & 0x03) {
-                        return -EFAULT;
-                }
-                data = ctrl_inl(addr);
-                break;
-        default:
-                return -EFAULT;
-                break;
-        }
-
-        if ((cmd & 0x01) == 0) {        /* read */
-                if (copy_to_user((int *)arg, &data, sizeof(int))) {
-                        return -EFAULT;
-                }
-        }
-        return 0;
-}
-
-static const struct file_operations gio_fops = {
-        .owner = THIS_MODULE,
-        .open = gio_open,       /* open */
-        .release = gio_close,   /* release */
-        .ioctl = gio_ioctl,     /* ioctl */
-};
-
-static int __init gio_init(void)
-{
-        int error;
-
-        printk(KERN_INFO "gio: driver initialized\n");
-
-        openCnt = 0;
-
-        if ((error = alloc_chrdev_region(&dev, 0, DEVCOUNT, "gio")) < 0) {
-                printk(KERN_ERR
-                       "gio: Couldn't alloc_chrdev_region, error=%d\n",
-                       error);
-                return 1;
-        }
-
-        cdev_p = cdev_alloc();
-        cdev_p->ops = &gio_fops;
-        error = cdev_add(cdev_p, dev, DEVCOUNT);
-        if (error) {
-                printk(KERN_ERR
-                       "gio: Couldn't cdev_add, error=%d\n", error);
-                return 1;
-        }
-
-        return 0;
-}
-
-static void __exit gio_exit(void)
-{
-        cdev_del(cdev_p);
-        unregister_chrdev_region(dev, DEVCOUNT);
-}
-
-module_init(gio_init);
-module_exit(gio_exit);
-
-MODULE_LICENSE("GPL");
diff --git a/arch/sh/boards/landisk/irq.c b/arch/sh/boards/landisk/irq.c
deleted file mode 100644
index 258649491d44..000000000000
--- a/arch/sh/boards/landisk/irq.c
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * arch/sh/boards/landisk/irq.c
- *
- * I-O DATA Device, Inc. LANDISK Support
- *
- * Copyright (C) 2005-2007 kogiidena
- *
- * Copyright (C) 2001  Ian da Silva, Jeremy Siegel
- * Based largely on io_se.c.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <asm/landisk/iodata_landisk.h>
-
-static void disable_landisk_irq(unsigned int irq)
-{
-        unsigned char mask = 0xff ^ (0x01 << (irq - 5));
-
-        ctrl_outb(ctrl_inb(PA_IMASK) & mask, PA_IMASK);
-}
-
-static void enable_landisk_irq(unsigned int irq)
-{
-        unsigned char value = (0x01 << (irq - 5));
-
-        ctrl_outb(ctrl_inb(PA_IMASK) | value, PA_IMASK);
-}
-
-static struct irq_chip landisk_irq_chip __read_mostly = {
-        .name           = "LANDISK",
-        .mask           = disable_landisk_irq,
-        .unmask         = enable_landisk_irq,
-        .mask_ack       = disable_landisk_irq,
-};
-
-/*
- * Initialize IRQ setting
- */
-void __init init_landisk_IRQ(void)
-{
-        int i;
-
-        for (i = 5; i < 14; i++) {
-                disable_irq_nosync(i);
-                set_irq_chip_and_handler_name(i, &landisk_irq_chip,
-                                              handle_level_irq, "level");
-                enable_landisk_irq(i);
-        }
-        ctrl_outb(0x00, PA_PWRINT_CLR);
-}
diff --git a/arch/sh/boards/landisk/psw.c b/arch/sh/boards/landisk/psw.c
deleted file mode 100644
index 5a9b70b5decb..000000000000
--- a/arch/sh/boards/landisk/psw.c
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * arch/sh/boards/landisk/psw.c
- *
- * push switch support for LANDISK and USL-5P
- *
- * Copyright (C) 2006-2007  Paul Mundt
- * Copyright (C) 2007  kogiidena
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/io.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <asm/landisk/iodata_landisk.h>
-#include <asm/push-switch.h>
-
-static irqreturn_t psw_irq_handler(int irq, void *arg)
-{
-        struct platform_device *pdev = arg;
-        struct push_switch *psw = platform_get_drvdata(pdev);
-        struct push_switch_platform_info *psw_info = pdev->dev.platform_data;
-        unsigned int sw_value;
-        int ret = 0;
-
-        sw_value = (0x0ff & (~ctrl_inb(PA_STATUS)));
-
-        /* Nothing to do if there's no state change */
-        if (psw->state) {
-                ret = 1;
-                goto out;
-        }
-
-        /* Figure out who raised it */
-        if (sw_value & (1 << psw_info->bit)) {
-                psw->state = 1;
-                mod_timer(&psw->debounce, jiffies + 50);
-                ret = 1;
-        }
-
-out:
-        /* Clear the switch IRQs */
-        ctrl_outb(0x00, PA_PWRINT_CLR);
-
-        return IRQ_RETVAL(ret);
-}
-
-static struct resource psw_power_resources[] = {
-        [0] = {
-                .start = IRQ_POWER,
-                .flags = IORESOURCE_IRQ,
-       },
-};
-
-static struct resource psw_usl5p_resources[] = {
-        [0] = {
-                .start = IRQ_BUTTON,
-                .flags = IORESOURCE_IRQ,
-        },
-};
-
-static struct push_switch_platform_info psw_power_platform_data = {
-        .name           = "psw_power",
-        .bit            = 4,
-        .irq_flags      = IRQF_SHARED,
-        .irq_handler    = psw_irq_handler,
-};
-
-static struct push_switch_platform_info psw1_platform_data = {
-        .name           = "psw1",
-        .bit            = 0,
-        .irq_flags      = IRQF_SHARED,
-        .irq_handler    = psw_irq_handler,
-};
-
-static struct push_switch_platform_info psw2_platform_data = {
-        .name           = "psw2",
-        .bit            = 2,
-        .irq_flags      = IRQF_SHARED,
-        .irq_handler    = psw_irq_handler,
-};
-
-static struct push_switch_platform_info psw3_platform_data = {
-        .name           = "psw3",
-        .bit            = 1,
-        .irq_flags      = IRQF_SHARED,
-        .irq_handler    = psw_irq_handler,
-};
-
-static struct platform_device psw_power_switch_device = {
-        .name           = "push-switch",
-        .id             = 0,
-        .num_resources  = ARRAY_SIZE(psw_power_resources),
-        .resource       = psw_power_resources,
-        .dev            = {
-                .platform_data = &psw_power_platform_data,
-        },
-};
-
-static struct platform_device psw1_switch_device = {
-        .name           = "push-switch",
-        .id             = 1,
-        .num_resources  = ARRAY_SIZE(psw_usl5p_resources),
-        .resource       = psw_usl5p_resources,
-        .dev            = {
-                .platform_data = &psw1_platform_data,
-        },
-};
-
-static struct platform_device psw2_switch_device = {
-        .name           = "push-switch",
-        .id             = 2,
-        .num_resources  = ARRAY_SIZE(psw_usl5p_resources),
-        .resource       = psw_usl5p_resources,
-        .dev            = {
-                .platform_data = &psw2_platform_data,
-        },
-};
-
-static struct platform_device psw3_switch_device = {
-        .name           = "push-switch",
-        .id             = 3,
-        .num_resources  = ARRAY_SIZE(psw_usl5p_resources),
-        .resource       = psw_usl5p_resources,
-        .dev = {
-                .platform_data = &psw3_platform_data,
-        },
-};
-
-static struct platform_device *psw_devices[] = {
-        &psw_power_switch_device,
-        &psw1_switch_device,
-        &psw2_switch_device,
-        &psw3_switch_device,
-};
-
-static int __init psw_init(void)
-{
-        return platform_add_devices(psw_devices, ARRAY_SIZE(psw_devices));
-}
-module_init(psw_init);
diff --git a/arch/sh/boards/landisk/setup.c b/arch/sh/boards/landisk/setup.c
deleted file mode 100644
index 2b708ec72558..000000000000
--- a/arch/sh/boards/landisk/setup.c
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * arch/sh/boards/landisk/setup.c
- *
- * I-O DATA Device, Inc. LANDISK Support.
- *
- * Copyright (C) 2000 Kazumoto Kojima
- * Copyright (C) 2002 Paul Mundt
- * Copylight (C) 2002 Atom Create Engineering Co., Ltd.
- * Copyright (C) 2005-2007 kogiidena
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/pm.h>
-#include <linux/mm.h>
-#include <asm/machvec.h>
-#include <asm/landisk/iodata_landisk.h>
-#include <asm/io.h>
-
-void init_landisk_IRQ(void);
-
-static void landisk_power_off(void)
-{
-        ctrl_outb(0x01, PA_SHUTDOWN);
-}
-
-static struct resource cf_ide_resources[3];
-
-static struct pata_platform_info pata_info = {
-        .ioport_shift   = 1,
-};
-
-static struct platform_device cf_ide_device = {
-        .name           = "pata_platform",
-        .id             = -1,
-        .num_resources  = ARRAY_SIZE(cf_ide_resources),
-        .resource       = cf_ide_resources,
-        .dev            = {
-                .platform_data = &pata_info,
-        },
-};
-
-static struct platform_device rtc_device = {
-        .name           = "rs5c313",
-        .id             = -1,
-};
-
-static struct platform_device *landisk_devices[] __initdata = {
-        &cf_ide_device,
-        &rtc_device,
-};
-
-static int __init landisk_devices_setup(void)
-{
-        pgprot_t prot;
-        unsigned long paddrbase;
-        void *cf_ide_base;
-
-        /* open I/O area window */
-        paddrbase = virt_to_phys((void *)PA_AREA5_IO);
-        prot = PAGE_KERNEL_PCC(1, _PAGE_PCC_IO16);
-        cf_ide_base = p3_ioremap(paddrbase, PAGE_SIZE, prot.pgprot);
-        if (!cf_ide_base) {
-                printk("allocate_cf_area : can't open CF I/O window!\n");
-                return -ENOMEM;
-        }
-
-        /* IDE cmd address : 0x1f0-0x1f7 and 0x3f6 */
-        cf_ide_resources[0].start = (unsigned long)cf_ide_base + 0x40;
-        cf_ide_resources[0].end   = (unsigned long)cf_ide_base + 0x40 + 0x0f;
-        cf_ide_resources[0].flags = IORESOURCE_IO;
-        cf_ide_resources[1].start = (unsigned long)cf_ide_base + 0x2c;
-        cf_ide_resources[1].end   = (unsigned long)cf_ide_base + 0x2c + 0x03;
-        cf_ide_resources[1].flags = IORESOURCE_IO;
-        cf_ide_resources[2].start = IRQ_FATA;
-        cf_ide_resources[2].flags = IORESOURCE_IRQ;
-
-        return platform_add_devices(landisk_devices,
-                                    ARRAY_SIZE(landisk_devices));
-}
-
-__initcall(landisk_devices_setup);
-
-static void __init landisk_setup(char **cmdline_p)
-{
-        /* LED ON */
-        ctrl_outb(ctrl_inb(PA_LED) | 0x03, PA_LED);
-
-        printk(KERN_INFO "I-O DATA DEVICE, INC. \"LANDISK Series\" support.\n");
-        pm_power_off = landisk_power_off;
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_landisk __initmv = {
-        .mv_name = "LANDISK",
-        .mv_nr_irqs = 72,
-        .mv_setup = landisk_setup,
-        .mv_init_irq = init_landisk_IRQ,
-};
diff --git a/arch/sh/boards/cayman/Makefile b/arch/sh/boards/mach-cayman/Makefile
index 489a8f867368..489a8f867368 100644
--- a/arch/sh/boards/cayman/Makefile
+++ b/arch/sh/boards/mach-cayman/Makefile
diff --git a/arch/sh/boards/mach-cayman/irq.c b/arch/sh/boards/mach-cayman/irq.c
new file mode 100644
index 000000000000..ceb37ae92c70
--- /dev/null
+++ b/arch/sh/boards/mach-cayman/irq.c
@@ -0,0 +1,197 @@
+/*
+ * arch/sh/mach-cayman/irq.c - SH-5 Cayman Interrupt Support
+ *
+ * This file handles the board specific parts of the Cayman interrupt system
+ *
+ * Copyright (C) 2002 Stuart Menefy
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/signal.h>
+#include <cpu/irq.h>
+#include <asm/page.h>
+
+/* Setup for the SMSC FDC37C935 / LAN91C100FD */
+#define SMSC_IRQ         IRQ_IRL1
+
+/* Setup for PCI Bus 2, which transmits interrupts via the EPLD */
+#define PCI2_IRQ         IRQ_IRL3
+
+unsigned long epld_virt;
+
+#define EPLD_BASE        0x04002000
+#define EPLD_STATUS_BASE (epld_virt + 0x10)
+#define EPLD_MASK_BASE   (epld_virt + 0x20)
+
+/* Note the SMSC SuperIO chip and SMSC LAN chip interrupts are all muxed onto
+   the same SH-5 interrupt */
+
+static irqreturn_t cayman_interrupt_smsc(int irq, void *dev_id)
+{
+        printk(KERN_INFO "CAYMAN: spurious SMSC interrupt\n");
+        return IRQ_NONE;
+}
+
+static irqreturn_t cayman_interrupt_pci2(int irq, void *dev_id)
+{
+        printk(KERN_INFO "CAYMAN: spurious PCI interrupt, IRQ %d\n", irq);
+        return IRQ_NONE;
+}
+
+static struct irqaction cayman_action_smsc = {
+        .name           = "Cayman SMSC Mux",
+        .handler        = cayman_interrupt_smsc,
+        .flags          = IRQF_DISABLED,
+};
+
+static struct irqaction cayman_action_pci2 = {
+        .name           = "Cayman PCI2 Mux",
+        .handler        = cayman_interrupt_pci2,
+        .flags          = IRQF_DISABLED,
+};
+
+static void enable_cayman_irq(unsigned int irq)
+{
+        unsigned long flags;
+        unsigned long mask;
+        unsigned int reg;
+        unsigned char bit;
+
+        irq -= START_EXT_IRQS;
+        reg = EPLD_MASK_BASE + ((irq / 8) << 2);
+        bit = 1<<(irq % 8);
+        local_irq_save(flags);
+        mask = ctrl_inl(reg);
+        mask |= bit;
+        ctrl_outl(mask, reg);
+        local_irq_restore(flags);
+}
+
+void disable_cayman_irq(unsigned int irq)
+{
+        unsigned long flags;
+        unsigned long mask;
+        unsigned int reg;
+        unsigned char bit;
+
+        irq -= START_EXT_IRQS;
+        reg = EPLD_MASK_BASE + ((irq / 8) << 2);
+        bit = 1<<(irq % 8);
+        local_irq_save(flags);
+        mask = ctrl_inl(reg);
+        mask &= ~bit;
+        ctrl_outl(mask, reg);
+        local_irq_restore(flags);
+}
+
+static void ack_cayman_irq(unsigned int irq)
+{
+        disable_cayman_irq(irq);
+}
+
+static void end_cayman_irq(unsigned int irq)
+{
+        if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
+                enable_cayman_irq(irq);
+}
+
+static unsigned int startup_cayman_irq(unsigned int irq)
+{
+        enable_cayman_irq(irq);
+        return 0; /* never anything pending */
+}
+
+static void shutdown_cayman_irq(unsigned int irq)
+{
+        disable_cayman_irq(irq);
+}
+
+struct hw_interrupt_type cayman_irq_type = {
+        .typename       = "Cayman-IRQ",
+        .startup        = startup_cayman_irq,
+        .shutdown       = shutdown_cayman_irq,
+        .enable         = enable_cayman_irq,
+        .disable        = disable_cayman_irq,
+        .ack            = ack_cayman_irq,
+        .end            = end_cayman_irq,
+};
+
+int cayman_irq_demux(int evt)
+{
+        int irq = intc_evt_to_irq[evt];
+
+        if (irq == SMSC_IRQ) {
+                unsigned long status;
+                int i;
+
+                status = ctrl_inl(EPLD_STATUS_BASE) &
+                         ctrl_inl(EPLD_MASK_BASE) & 0xff;
+                if (status == 0) {
+                        irq = -1;
+                } else {
+                        for (i=0; i<8; i++) {
+                                if (status & (1<<i))
+                                        break;
+                        }
+                        irq = START_EXT_IRQS + i;
+                }
+        }
+
+        if (irq == PCI2_IRQ) {
+                unsigned long status;
+                int i;
+
+                status = ctrl_inl(EPLD_STATUS_BASE + 3 * sizeof(u32)) &
+                         ctrl_inl(EPLD_MASK_BASE + 3 * sizeof(u32)) & 0xff;
+                if (status == 0) {
+                        irq = -1;
+                } else {
+                        for (i=0; i<8; i++) {
+                                if (status & (1<<i))
+                                        break;
+                        }
+                        irq = START_EXT_IRQS + (3 * 8) + i;
+                }
+        }
+
+        return irq;
+}
+
+#if defined(CONFIG_PROC_FS) && defined(CONFIG_SYSCTL)
+int cayman_irq_describe(char* p, int irq)
+{
+        if (irq < NR_INTC_IRQS) {
+                return intc_irq_describe(p, irq);
+        } else if (irq < NR_INTC_IRQS + 8) {
+                return sprintf(p, "(SMSC %d)", irq - NR_INTC_IRQS);
+        } else if ((irq >= NR_INTC_IRQS + 24) && (irq < NR_INTC_IRQS + 32)) {
+                return sprintf(p, "(PCI2 %d)", irq - (NR_INTC_IRQS + 24));
+        }
+
+        return 0;
+}
+#endif
+
+void init_cayman_irq(void)
+{
+        int i;
+
+        epld_virt = onchip_remap(EPLD_BASE, 1024, "EPLD");
+        if (!epld_virt) {
+                printk(KERN_ERR "Cayman IRQ: Unable to remap EPLD\n");
+                return;
+        }
+
+        for (i=0; i<NR_EXT_IRQS; i++) {
+                irq_desc[START_EXT_IRQS + i].chip = &cayman_irq_type;
+        }
+
+        /* Setup the SMSC interrupt */
+        setup_irq(SMSC_IRQ, &cayman_action_smsc);
+        setup_irq(PCI2_IRQ, &cayman_action_pci2);
+}
diff --git a/arch/sh/boards/cayman/led.c b/arch/sh/boards/mach-cayman/led.c
index a808eac4ecd6..a808eac4ecd6 100644
--- a/arch/sh/boards/cayman/led.c
+++ b/arch/sh/boards/mach-cayman/led.c
diff --git a/arch/sh/boards/mach-cayman/setup.c b/arch/sh/boards/mach-cayman/setup.c
new file mode 100644
index 000000000000..e7f9cc5f2ff1
--- /dev/null
+++ b/arch/sh/boards/mach-cayman/setup.c
@@ -0,0 +1,187 @@
+/*
+ * arch/sh/mach-cayman/setup.c
+ *
+ * SH5 Cayman support
+ *
+ * Copyright (C) 2002  David J. Mckay & Benedict Gaster
+ * Copyright (C) 2003 - 2007  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <cpu/irq.h>
+
+/*
+ * Platform Dependent Interrupt Priorities.
+ */
+
+/* Using defaults defined in irq.h */
+#define RES NO_PRIORITY         /* Disabled */
+#define IR0 IRL0_PRIORITY       /* IRLs */
+#define IR1 IRL1_PRIORITY
+#define IR2 IRL2_PRIORITY
+#define IR3 IRL3_PRIORITY
+#define PCA INTA_PRIORITY       /* PCI Ints */
+#define PCB INTB_PRIORITY
+#define PCC INTC_PRIORITY
+#define PCD INTD_PRIORITY
+#define SER TOP_PRIORITY
+#define ERR TOP_PRIORITY
+#define PW0 TOP_PRIORITY
+#define PW1 TOP_PRIORITY
+#define PW2 TOP_PRIORITY
+#define PW3 TOP_PRIORITY
+#define DM0 NO_PRIORITY         /* DMA Ints */
+#define DM1 NO_PRIORITY
+#define DM2 NO_PRIORITY
+#define DM3 NO_PRIORITY
+#define DAE NO_PRIORITY
+#define TU0 TIMER_PRIORITY      /* TMU Ints */
+#define TU1 NO_PRIORITY
+#define TU2 NO_PRIORITY
+#define TI2 NO_PRIORITY
+#define ATI NO_PRIORITY         /* RTC Ints */
+#define PRI NO_PRIORITY
+#define CUI RTC_PRIORITY
+#define ERI SCIF_PRIORITY       /* SCIF Ints */
+#define RXI SCIF_PRIORITY
+#define BRI SCIF_PRIORITY
+#define TXI SCIF_PRIORITY
+#define ITI TOP_PRIORITY        /* WDT Ints */
+
+/* Setup for the SMSC FDC37C935 */
+#define SMSC_SUPERIO_BASE       0x04000000
+#define SMSC_CONFIG_PORT_ADDR   0x3f0
+#define SMSC_INDEX_PORT_ADDR    SMSC_CONFIG_PORT_ADDR
+#define SMSC_DATA_PORT_ADDR     0x3f1
+
+#define SMSC_ENTER_CONFIG_KEY   0x55
+#define SMSC_EXIT_CONFIG_KEY    0xaa
+
+#define SMCS_LOGICAL_DEV_INDEX  0x07
+#define SMSC_DEVICE_ID_INDEX    0x20
+#define SMSC_DEVICE_REV_INDEX   0x21
+#define SMSC_ACTIVATE_INDEX     0x30
+#define SMSC_PRIMARY_BASE_INDEX  0x60
+#define SMSC_SECONDARY_BASE_INDEX 0x62
+#define SMSC_PRIMARY_INT_INDEX  0x70
+#define SMSC_SECONDARY_INT_INDEX 0x72
+
+#define SMSC_IDE1_DEVICE        1
+#define SMSC_KEYBOARD_DEVICE    7
+#define SMSC_CONFIG_REGISTERS   8
+
+#define SMSC_SUPERIO_READ_INDEXED(index) ({ \
+        outb((index), SMSC_INDEX_PORT_ADDR); \
+        inb(SMSC_DATA_PORT_ADDR); })
+#define SMSC_SUPERIO_WRITE_INDEXED(val, index) ({ \
+        outb((index), SMSC_INDEX_PORT_ADDR); \
+        outb((val),   SMSC_DATA_PORT_ADDR); })
+
+#define IDE1_PRIMARY_BASE       0x01f0
+#define IDE1_SECONDARY_BASE     0x03f6
+
+unsigned long smsc_superio_virt;
+
+int platform_int_priority[NR_INTC_IRQS] = {
+        IR0, IR1, IR2, IR3, PCA, PCB, PCC, PCD, /* IRQ  0- 7 */
+        RES, RES, RES, RES, SER, ERR, PW3, PW2, /* IRQ  8-15 */
+        PW1, PW0, DM0, DM1, DM2, DM3, DAE, RES, /* IRQ 16-23 */
+        RES, RES, RES, RES, RES, RES, RES, RES, /* IRQ 24-31 */
+        TU0, TU1, TU2, TI2, ATI, PRI, CUI, ERI, /* IRQ 32-39 */
+        RXI, BRI, TXI, RES, RES, RES, RES, RES, /* IRQ 40-47 */
+        RES, RES, RES, RES, RES, RES, RES, RES, /* IRQ 48-55 */
+        RES, RES, RES, RES, RES, RES, RES, ITI, /* IRQ 56-63 */
+};
+
+static int __init smsc_superio_setup(void)
+{
+        unsigned char devid, devrev;
+
+        smsc_superio_virt = onchip_remap(SMSC_SUPERIO_BASE, 1024, "SMSC SuperIO");
+        if (!smsc_superio_virt) {
+                panic("Unable to remap SMSC SuperIO\n");
+        }
+
+        /* Initially the chip is in run state */
+        /* Put it into configuration state */
+        outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
+        outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
+
+        /* Read device ID info */
+        devid = SMSC_SUPERIO_READ_INDEXED(SMSC_DEVICE_ID_INDEX);
+        devrev = SMSC_SUPERIO_READ_INDEXED(SMSC_DEVICE_REV_INDEX);
+        printk("SMSC SuperIO devid %02x rev %02x\n", devid, devrev);
+
+        /* Select the keyboard device */
+        SMSC_SUPERIO_WRITE_INDEXED(SMSC_KEYBOARD_DEVICE, SMCS_LOGICAL_DEV_INDEX);
+
+        /* enable it */
+        SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
+
+        /* Select the interrupts */
+        /* On a PC keyboard is IRQ1, mouse is IRQ12 */
+        SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_PRIMARY_INT_INDEX);
+        SMSC_SUPERIO_WRITE_INDEXED(12, SMSC_SECONDARY_INT_INDEX);
+
+#ifdef CONFIG_IDE
+        /*
+         * Only IDE1 exists on the Cayman
+         */
+
+        /* Power it on */
+        SMSC_SUPERIO_WRITE_INDEXED(1 << SMSC_IDE1_DEVICE, 0x22);
+
+        SMSC_SUPERIO_WRITE_INDEXED(SMSC_IDE1_DEVICE, SMCS_LOGICAL_DEV_INDEX);
+        SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
+
+        SMSC_SUPERIO_WRITE_INDEXED(IDE1_PRIMARY_BASE >> 8,
+                                   SMSC_PRIMARY_BASE_INDEX + 0);
+        SMSC_SUPERIO_WRITE_INDEXED(IDE1_PRIMARY_BASE & 0xff,
+                                   SMSC_PRIMARY_BASE_INDEX + 1);
+
+        SMSC_SUPERIO_WRITE_INDEXED(IDE1_SECONDARY_BASE >> 8,
+                                   SMSC_SECONDARY_BASE_INDEX + 0);
+        SMSC_SUPERIO_WRITE_INDEXED(IDE1_SECONDARY_BASE & 0xff,
+                                   SMSC_SECONDARY_BASE_INDEX + 1);
+
+        SMSC_SUPERIO_WRITE_INDEXED(14, SMSC_PRIMARY_INT_INDEX);
+
+        SMSC_SUPERIO_WRITE_INDEXED(SMSC_CONFIG_REGISTERS,
+                                   SMCS_LOGICAL_DEV_INDEX);
+
+        SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc2); /* GP42 = nIDE1_OE */
+        SMSC_SUPERIO_WRITE_INDEXED(0x01, 0xc5); /* GP45 = IDE1_IRQ */
+        SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc6); /* GP46 = nIOROP */
+        SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc7); /* GP47 = nIOWOP */
+#endif
+
+        /* Exit the configuration state */
+        outb(SMSC_EXIT_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
+
+        return 0;
+}
+__initcall(smsc_superio_setup);
+
+static void __iomem *cayman_ioport_map(unsigned long port, unsigned int len)
+{
+        if (port < 0x400) {
+                extern unsigned long smsc_superio_virt;
+                return (void __iomem *)((port << 2) | smsc_superio_virt);
+        }
+
+        return (void __iomem *)port;
+}
+
+extern void init_cayman_irq(void);
+
+static struct sh_machine_vector mv_cayman __initmv = {
+        .mv_name                = "Hitachi Cayman",
+        .mv_nr_irqs             = 64,
+        .mv_ioport_map          = cayman_ioport_map,
+        .mv_init_irq            = init_cayman_irq,
+};
diff --git a/arch/sh/boards/dreamcast/Makefile b/arch/sh/boards/mach-dreamcast/Makefile
index 7b97546c7e5f..7b97546c7e5f 100644
--- a/arch/sh/boards/dreamcast/Makefile
+++ b/arch/sh/boards/mach-dreamcast/Makefile
diff --git a/arch/sh/boards/mach-dreamcast/irq.c b/arch/sh/boards/mach-dreamcast/irq.c
new file mode 100644
index 000000000000..67bdc33dd411
--- /dev/null
+++ b/arch/sh/boards/mach-dreamcast/irq.c
@@ -0,0 +1,153 @@
+/*
+ * arch/sh/boards/dreamcast/irq.c
+ *
+ * Holly IRQ support for the Sega Dreamcast.
+ *
+ * Copyright (c) 2001, 2002 M. R. Brown <mrbrown@0xd6.org>
+ *
+ * This file is part of the LinuxDC project (www.linuxdc.org)
+ * Released under the terms of the GNU GPL v2.0
+ */
+
+#include <linux/irq.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <mach/sysasic.h>
+
+/* Dreamcast System ASIC Hardware Events -
+
+   The Dreamcast's System ASIC (a.k.a. Holly) is responsible for receiving
+   hardware events from system peripherals and triggering an SH7750 IRQ.
+   Hardware events can trigger IRQs 13, 11, or 9 depending on which bits are
+   set in the Event Mask Registers (EMRs).  When a hardware event is
+   triggered, it's corresponding bit in the Event Status Registers (ESRs)
+   is set, and that bit should be rewritten to the ESR to acknowledge that
+   event.
+
+   There are three 32-bit ESRs located at 0xa05f8900 - 0xa05f6908.  Event
+   types can be found in include/asm-sh/dreamcast/sysasic.h. There are three
+   groups of EMRs that parallel the ESRs.  Each EMR group corresponds to an
+   IRQ, so 0xa05f6910 - 0xa05f6918 triggers IRQ 13, 0xa05f6920 - 0xa05f6928
+   triggers IRQ 11, and 0xa05f6930 - 0xa05f6938 triggers IRQ 9.
+
+   In the kernel, these events are mapped to virtual IRQs so that drivers can
+   respond to them as they would a normal interrupt.  In order to keep this
+   mapping simple, the events are mapped as:
+
+   6900/6910 - Events  0-31, IRQ 13
+   6904/6924 - Events 32-63, IRQ 11
+   6908/6938 - Events 64-95, IRQ  9
+
+*/
+
+#define ESR_BASE 0x005f6900    /* Base event status register */
+#define EMR_BASE 0x005f6910    /* Base event mask register */
+
+/* Helps us determine the EMR group that this event belongs to: 0 = 0x6910,
+   1 = 0x6920, 2 = 0x6930; also determine the event offset */
+#define LEVEL(event) (((event) - HW_EVENT_IRQ_BASE) / 32)
+
+/* Return the hardware event's bit positon within the EMR/ESR */
+#define EVENT_BIT(event) (((event) - HW_EVENT_IRQ_BASE) & 31)
+
+/* For each of these *_irq routines, the IRQ passed in is the virtual IRQ
+   (logically mapped to the corresponding bit for the hardware event). */
+
+/* Disable the hardware event by masking its bit in its EMR */
+static inline void disable_systemasic_irq(unsigned int irq)
+{
+        __u32 emr = EMR_BASE + (LEVEL(irq) << 4) + (LEVEL(irq) << 2);
+        __u32 mask;
+
+        mask = inl(emr);
+        mask &= ~(1 << EVENT_BIT(irq));
+        outl(mask, emr);
+}
+
+/* Enable the hardware event by setting its bit in its EMR */
+static inline void enable_systemasic_irq(unsigned int irq)
+{
+        __u32 emr = EMR_BASE + (LEVEL(irq) << 4) + (LEVEL(irq) << 2);
+        __u32 mask;
+
+        mask = inl(emr);
+        mask |= (1 << EVENT_BIT(irq));
+        outl(mask, emr);
+}
+
+/* Acknowledge a hardware event by writing its bit back to its ESR */
+static void ack_systemasic_irq(unsigned int irq)
+{
+        __u32 esr = ESR_BASE + (LEVEL(irq) << 2);
+        disable_systemasic_irq(irq);
+        outl((1 << EVENT_BIT(irq)), esr);
+}
+
+/* After a IRQ has been ack'd and responded to, it needs to be renabled */
+static void end_systemasic_irq(unsigned int irq)
+{
+        if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
+                enable_systemasic_irq(irq);
+}
+
+static unsigned int startup_systemasic_irq(unsigned int irq)
+{
+        enable_systemasic_irq(irq);
+
+        return 0;
+}
+
+static void shutdown_systemasic_irq(unsigned int irq)
+{
+        disable_systemasic_irq(irq);
+}
+
+struct hw_interrupt_type systemasic_int = {
+        .typename       = "System ASIC",
+        .startup        = startup_systemasic_irq,
+        .shutdown       = shutdown_systemasic_irq,
+        .enable         = enable_systemasic_irq,
+        .disable        = disable_systemasic_irq,
+        .ack            = ack_systemasic_irq,
+        .end            = end_systemasic_irq,
+};
+
+/*
+ * Map the hardware event indicated by the processor IRQ to a virtual IRQ.
+ */
+int systemasic_irq_demux(int irq)
+{
+        __u32 emr, esr, status, level;
+        __u32 j, bit;
+
+        switch (irq) {
+                case 13:
+                        level = 0;
+                        break;
+                case 11:
+                        level = 1;
+                        break;
+                case  9:
+                        level = 2;
+                        break;
+                default:
+                        return irq;
+        }
+        emr = EMR_BASE + (level << 4) + (level << 2);
+        esr = ESR_BASE + (level << 2);
+
+        /* Mask the ESR to filter any spurious, unwanted interrupts */
+        status = inl(esr);
+        status &= inl(emr);
+
+        /* Now scan and find the first set bit as the event to map */
+        for (bit = 1, j = 0; j < 32; bit <<= 1, j++) {
+                if (status & bit) {
+                        irq = HW_EVENT_IRQ_BASE + j + (level << 5);
+                        return irq;
+                }
+        }
+
+        /* Not reached */
+        return irq;
+}
diff --git a/arch/sh/boards/mach-dreamcast/rtc.c b/arch/sh/boards/mach-dreamcast/rtc.c
new file mode 100644
index 000000000000..a7433685798d
--- /dev/null
+++ b/arch/sh/boards/mach-dreamcast/rtc.c
@@ -0,0 +1,81 @@
+/*
+ * arch/sh/boards/dreamcast/rtc.c
+ *
+ * Dreamcast AICA RTC routines.
+ *
+ * Copyright (c) 2001, 2002 M. R. Brown <mrbrown@0xd6.org>
+ * Copyright (c) 2002 Paul Mundt <lethal@chaoticdreams.org>
+ *
+ * Released under the terms of the GNU GPL v2.0.
+ *
+ */
+
+#include <linux/time.h>
+#include <asm/rtc.h>
+#include <asm/io.h>
+
+/* The AICA RTC has an Epoch of 1/1/1950, so we must subtract 20 years (in
+   seconds) to get the standard Unix Epoch when getting the time, and add
+   20 years when setting the time. */
+#define TWENTY_YEARS ((20 * 365LU + 5) * 86400)
+
+/* The AICA RTC is represented by a 32-bit seconds counter stored in 2 16-bit
+   registers.*/
+#define AICA_RTC_SECS_H         0xa0710000
+#define AICA_RTC_SECS_L         0xa0710004
+
+/**
+ * aica_rtc_gettimeofday - Get the time from the AICA RTC
+ * @ts: pointer to resulting timespec
+ *
+ * Grabs the current RTC seconds counter and adjusts it to the Unix Epoch.
+ */
+static void aica_rtc_gettimeofday(struct timespec *ts)
+{
+        unsigned long val1, val2;
+
+        do {
+                val1 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) |
+                        (ctrl_inl(AICA_RTC_SECS_L) & 0xffff);
+
+                val2 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) |
+                        (ctrl_inl(AICA_RTC_SECS_L) & 0xffff);
+        } while (val1 != val2);
+
+        ts->tv_sec = val1 - TWENTY_YEARS;
+
+        /* Can't get nanoseconds with just a seconds counter. */
+        ts->tv_nsec = 0;
+}
+
+/**
+ * aica_rtc_settimeofday - Set the AICA RTC to the current time
+ * @secs: contains the time_t to set
+ *
+ * Adjusts the given @tv to the AICA Epoch and sets the RTC seconds counter.
+ */
+static int aica_rtc_settimeofday(const time_t secs)
+{
+        unsigned long val1, val2;
+        unsigned long adj = secs + TWENTY_YEARS;
+
+        do {
+                ctrl_outl((adj & 0xffff0000) >> 16, AICA_RTC_SECS_H);
+                ctrl_outl((adj & 0xffff), AICA_RTC_SECS_L);
+
+                val1 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) |
+                        (ctrl_inl(AICA_RTC_SECS_L) & 0xffff);
+
+                val2 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) |
+                        (ctrl_inl(AICA_RTC_SECS_L) & 0xffff);
+        } while (val1 != val2);
+
+        return 0;
+}
+
+void aica_time_init(void)
+{
+        rtc_sh_get_time = aica_rtc_gettimeofday;
+        rtc_sh_set_time = aica_rtc_settimeofday;
+}
+
diff --git a/arch/sh/boards/mach-dreamcast/setup.c b/arch/sh/boards/mach-dreamcast/setup.c
new file mode 100644
index 000000000000..7d944fc75e93
--- /dev/null
+++ b/arch/sh/boards/mach-dreamcast/setup.c
@@ -0,0 +1,64 @@
+/*
+ * arch/sh/boards/dreamcast/setup.c
+ *
+ * Hardware support for the Sega Dreamcast.
+ *
+ * Copyright (c) 2001, 2002 M. R. Brown <mrbrown@linuxdc.org>
+ * Copyright (c) 2002, 2003, 2004 Paul Mundt <lethal@linux-sh.org>
+ *
+ * This file is part of the LinuxDC project (www.linuxdc.org)
+ *
+ * Released under the terms of the GNU GPL v2.0.
+ *
+ * This file originally bore the message (with enclosed-$):
+ *      Id: setup_dc.c,v 1.5 2001/05/24 05:09:16 mrbrown Exp
+ *      SEGA Dreamcast support
+ */
+
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/device.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/rtc.h>
+#include <asm/machvec.h>
+#include <mach/sysasic.h>
+
+extern struct hw_interrupt_type systemasic_int;
+extern void aica_time_init(void);
+extern int gapspci_init(void);
+extern int systemasic_irq_demux(int);
+
+static void __init dreamcast_setup(char **cmdline_p)
+{
+        int i;
+
+        /* Mask all hardware events */
+        /* XXX */
+
+        /* Acknowledge any previous events */
+        /* XXX */
+
+        __set_io_port_base(0xa0000000);
+
+        /* Assign all virtual IRQs to the System ASIC int. handler */
+        for (i = HW_EVENT_IRQ_BASE; i < HW_EVENT_IRQ_MAX; i++)
+                irq_desc[i].chip = &systemasic_int;
+
+        board_time_init = aica_time_init;
+
+#ifdef CONFIG_PCI
+        if (gapspci_init() < 0)
+                printk(KERN_WARNING "GAPSPCI was not detected.\n");
+#endif
+}
+
+static struct sh_machine_vector mv_dreamcast __initmv = {
+        .mv_name                = "Sega Dreamcast",
+        .mv_setup               = dreamcast_setup,
+        .mv_irq_demux           = systemasic_irq_demux,
+};
diff --git a/arch/sh/boards/renesas/edosk7705/Makefile b/arch/sh/boards/mach-edosk7705/Makefile
index 14bdd531f116..14bdd531f116 100644
--- a/arch/sh/boards/renesas/edosk7705/Makefile
+++ b/arch/sh/boards/mach-edosk7705/Makefile
diff --git a/arch/sh/boards/renesas/edosk7705/io.c b/arch/sh/boards/mach-edosk7705/io.c
index 541cea2a652f..541cea2a652f 100644
--- a/arch/sh/boards/renesas/edosk7705/io.c
+++ b/arch/sh/boards/mach-edosk7705/io.c
diff --git a/arch/sh/boards/renesas/edosk7705/setup.c b/arch/sh/boards/mach-edosk7705/setup.c
index f076c45308dd..f076c45308dd 100644
--- a/arch/sh/boards/renesas/edosk7705/setup.c
+++ b/arch/sh/boards/mach-edosk7705/setup.c
diff --git a/arch/sh/boards/renesas/r7780rp/Kconfig b/arch/sh/boards/mach-highlander/Kconfig
index fc8f28e04ba3..fc8f28e04ba3 100644
--- a/arch/sh/boards/renesas/r7780rp/Kconfig
+++ b/arch/sh/boards/mach-highlander/Kconfig
diff --git a/arch/sh/boards/renesas/r7780rp/Makefile b/arch/sh/boards/mach-highlander/Makefile
index 20a10080b11f..20a10080b11f 100644
--- a/arch/sh/boards/renesas/r7780rp/Makefile
+++ b/arch/sh/boards/mach-highlander/Makefile
diff --git a/arch/sh/boards/renesas/r7780rp/irq-r7780mp.c b/arch/sh/boards/mach-highlander/irq-r7780mp.c
index ae1cfcb29700..ae1cfcb29700 100644
--- a/arch/sh/boards/renesas/r7780rp/irq-r7780mp.c
+++ b/arch/sh/boards/mach-highlander/irq-r7780mp.c
diff --git a/arch/sh/boards/renesas/r7780rp/irq-r7780rp.c b/arch/sh/boards/mach-highlander/irq-r7780rp.c
index 9d3921fe27c0..9d3921fe27c0 100644
--- a/arch/sh/boards/renesas/r7780rp/irq-r7780rp.c
+++ b/arch/sh/boards/mach-highlander/irq-r7780rp.c
diff --git a/arch/sh/boards/renesas/r7780rp/irq-r7785rp.c b/arch/sh/boards/mach-highlander/irq-r7785rp.c
index 896c045aa39d..896c045aa39d 100644
--- a/arch/sh/boards/renesas/r7780rp/irq-r7785rp.c
+++ b/arch/sh/boards/mach-highlander/irq-r7785rp.c
diff --git a/arch/sh/boards/mach-highlander/psw.c b/arch/sh/boards/mach-highlander/psw.c
new file mode 100644
index 000000000000..be8d5477fc65
--- /dev/null
+++ b/arch/sh/boards/mach-highlander/psw.c
@@ -0,0 +1,122 @@
+/*
+ * arch/sh/boards/renesas/r7780rp/psw.c
+ *
+ * push switch support for RDBRP-1/RDBREVRP-1 debug boards.
+ *
+ * Copyright (C) 2006  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <asm/r7780rp.h>
+#include <asm/push-switch.h>
+
+static irqreturn_t psw_irq_handler(int irq, void *arg)
+{
+        struct platform_device *pdev = arg;
+        struct push_switch *psw = platform_get_drvdata(pdev);
+        struct push_switch_platform_info *psw_info = pdev->dev.platform_data;
+        unsigned int l, mask;
+        int ret = 0;
+
+        l = ctrl_inw(PA_DBSW);
+
+        /* Nothing to do if there's no state change */
+        if (psw->state) {
+                ret = 1;
+                goto out;
+        }
+
+        mask = l & 0x70;
+        /* Figure out who raised it */
+        if (mask & (1 << psw_info->bit)) {
+                psw->state = !!(mask & (1 << psw_info->bit));
+                if (psw->state) /* debounce */
+                        mod_timer(&psw->debounce, jiffies + 50);
+
+                ret = 1;
+        }
+
+out:
+        /* Clear the switch IRQs */
+        l |= (0x7 << 12);
+        ctrl_outw(l, PA_DBSW);
+
+        return IRQ_RETVAL(ret);
+}
+
+static struct resource psw_resources[] = {
+        [0] = {
+                .start  = IRQ_PSW,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct push_switch_platform_info s2_platform_data = {
+        .name           = "s2",
+        .bit            = 6,
+        .irq_flags      = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
+                          IRQF_SHARED,
+        .irq_handler    = psw_irq_handler,
+};
+
+static struct platform_device s2_switch_device = {
+        .name           = "push-switch",
+        .id             = 0,
+        .num_resources  = ARRAY_SIZE(psw_resources),
+        .resource       = psw_resources,
+        .dev            = {
+                .platform_data = &s2_platform_data,
+        },
+};
+
+static struct push_switch_platform_info s3_platform_data = {
+        .name           = "s3",
+        .bit            = 5,
+        .irq_flags      = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
+                          IRQF_SHARED,
+        .irq_handler    = psw_irq_handler,
+};
+
+static struct platform_device s3_switch_device = {
+        .name           = "push-switch",
+        .id             = 1,
+        .num_resources  = ARRAY_SIZE(psw_resources),
+        .resource       = psw_resources,
+        .dev            = {
+                .platform_data = &s3_platform_data,
+        },
+};
+
+static struct push_switch_platform_info s4_platform_data = {
+        .name           = "s4",
+        .bit            = 4,
+        .irq_flags      = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
+                          IRQF_SHARED,
+        .irq_handler    = psw_irq_handler,
+};
+
+static struct platform_device s4_switch_device = {
+        .name           = "push-switch",
+        .id             = 2,
+        .num_resources  = ARRAY_SIZE(psw_resources),
+        .resource       = psw_resources,
+        .dev            = {
+                .platform_data = &s4_platform_data,
+        },
+};
+
+static struct platform_device *psw_devices[] = {
+        &s2_switch_device, &s3_switch_device, &s4_switch_device,
+};
+
+static int __init psw_init(void)
+{
+        return platform_add_devices(psw_devices, ARRAY_SIZE(psw_devices));
+}
+module_init(psw_init);
diff --git a/arch/sh/boards/renesas/r7780rp/setup.c b/arch/sh/boards/mach-highlander/setup.c
index bc79afb6fc4c..bc79afb6fc4c 100644
--- a/arch/sh/boards/renesas/r7780rp/setup.c
+++ b/arch/sh/boards/mach-highlander/setup.c
diff --git a/arch/sh/boards/hp6xx/Makefile b/arch/sh/boards/mach-hp6xx/Makefile
index b3124278247c..b3124278247c 100644
--- a/arch/sh/boards/hp6xx/Makefile
+++ b/arch/sh/boards/mach-hp6xx/Makefile
diff --git a/arch/sh/boards/hp6xx/hp6xx_apm.c b/arch/sh/boards/mach-hp6xx/hp6xx_apm.c
index 177f4f028e0d..177f4f028e0d 100644
--- a/arch/sh/boards/hp6xx/hp6xx_apm.c
+++ b/arch/sh/boards/mach-hp6xx/hp6xx_apm.c
diff --git a/arch/sh/boards/mach-hp6xx/pm.c b/arch/sh/boards/mach-hp6xx/pm.c
new file mode 100644
index 000000000000..e96684def788
--- /dev/null
+++ b/arch/sh/boards/mach-hp6xx/pm.c
@@ -0,0 +1,81 @@
+/*
+ * hp6x0 Power Management Routines
+ *
+ * Copyright (c) 2006 Andriy Skulysh <askulsyh@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License.
+ */
+#include <linux/init.h>
+#include <linux/suspend.h>
+#include <linux/errno.h>
+#include <linux/time.h>
+#include <asm/io.h>
+#include <asm/hd64461.h>
+#include <asm/hp6xx.h>
+#include <cpu/dac.h>
+#include <asm/pm.h>
+
+#define STBCR           0xffffff82
+#define STBCR2          0xffffff88
+
+static int hp6x0_pm_enter(suspend_state_t state)
+{
+        u8 stbcr, stbcr2;
+#ifdef CONFIG_HD64461_ENABLER
+        u8 scr;
+        u16 hd64461_stbcr;
+#endif
+
+#ifdef CONFIG_HD64461_ENABLER
+        outb(0, HD64461_PCC1CSCIER);
+
+        scr = inb(HD64461_PCC1SCR);
+        scr |= HD64461_PCCSCR_VCC1;
+        outb(scr, HD64461_PCC1SCR);
+
+        hd64461_stbcr = inw(HD64461_STBCR);
+        hd64461_stbcr |= HD64461_STBCR_SPC1ST;
+        outw(hd64461_stbcr, HD64461_STBCR);
+#endif
+
+        ctrl_outb(0x1f, DACR);
+
+        stbcr = ctrl_inb(STBCR);
+        ctrl_outb(0x01, STBCR);
+
+        stbcr2 = ctrl_inb(STBCR2);
+        ctrl_outb(0x7f , STBCR2);
+
+        outw(0xf07f, HD64461_SCPUCR);
+
+        pm_enter();
+
+        outw(0, HD64461_SCPUCR);
+        ctrl_outb(stbcr, STBCR);
+        ctrl_outb(stbcr2, STBCR2);
+
+#ifdef CONFIG_HD64461_ENABLER
+        hd64461_stbcr = inw(HD64461_STBCR);
+        hd64461_stbcr &= ~HD64461_STBCR_SPC1ST;
+        outw(hd64461_stbcr, HD64461_STBCR);
+
+        outb(0x4c, HD64461_PCC1CSCIER);
+        outb(0x00, HD64461_PCC1CSCR);
+#endif
+
+        return 0;
+}
+
+static struct platform_suspend_ops hp6x0_pm_ops = {
+        .enter          = hp6x0_pm_enter,
+        .valid          = suspend_valid_only_mem,
+};
+
+static int __init hp6x0_pm_init(void)
+{
+        suspend_set_ops(&hp6x0_pm_ops);
+        return 0;
+}
+
+late_initcall(hp6x0_pm_init);
diff --git a/arch/sh/boards/mach-hp6xx/pm_wakeup.S b/arch/sh/boards/mach-hp6xx/pm_wakeup.S
new file mode 100644
index 000000000000..44b648cf6f23
--- /dev/null
+++ b/arch/sh/boards/mach-hp6xx/pm_wakeup.S
@@ -0,0 +1,58 @@
+/*
+ * Copyright (c) 2006 Andriy Skulysh <askulsyh@gmail.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+
+#include <linux/linkage.h>
+#include <cpu/mmu_context.h>
+
+#define k0      r0
+#define k1      r1
+#define k2      r2
+#define k3      r3
+#define k4      r4
+
+/*
+ * Kernel mode register usage:
+ *      k0      scratch
+ *      k1      scratch
+ *      k2      scratch (Exception code)
+ *      k3      scratch (Return address)
+ *      k4      scratch
+ *      k5      reserved
+ *      k6      Global Interrupt Mask (0--15 << 4)
+ *      k7      CURRENT_THREAD_INFO (pointer to current thread info)
+ */
+
+ENTRY(wakeup_start)
+! clear STBY bit
+        mov     #-126, k2
+        and     #127, k0
+        mov.b   k0, @k2
+! enable refresh
+        mov.l   5f, k1
+        mov.w   6f, k0
+        mov.w   k0, @k1
+! jump to handler
+        mov.l   2f, k2
+        mov.l   3f, k3
+        mov.l   @k2, k2
+
+        mov.l   4f, k1
+        jmp     @k1
+        nop
+
+        .align  2
+1:      .long   EXPEVT
+2:      .long   INTEVT
+3:      .long   ret_from_irq
+4:      .long   handle_exception
+5:      .long   0xffffff68
+6:      .word   0x0524
+
+ENTRY(wakeup_end)
+        nop
diff --git a/arch/sh/boards/mach-hp6xx/setup.c b/arch/sh/boards/mach-hp6xx/setup.c
new file mode 100644
index 000000000000..475b46caec1f
--- /dev/null
+++ b/arch/sh/boards/mach-hp6xx/setup.c
@@ -0,0 +1,121 @@
+/*
+ * linux/arch/sh/boards/hp6xx/setup.c
+ *
+ * Copyright (C) 2002 Andriy Skulysh
+ * Copyright (C) 2007 Kristoffer Ericson <Kristoffer_e1@hotmail.com>
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * Setup code for HP620/HP660/HP680/HP690 (internal peripherials only)
+ */
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <asm/hd64461.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/hp6xx.h>
+#include <cpu/dac.h>
+
+#define SCPCR   0xa4000116
+#define SCPDR   0xa4000136
+
+/* CF Slot */
+static struct resource cf_ide_resources[] = {
+        [0] = {
+                .start = 0x15000000 + 0x1f0,
+                .end   = 0x15000000 + 0x1f0 + 0x08 - 0x01,
+                .flags = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start = 0x15000000 + 0x1fe,
+                .end   = 0x15000000 + 0x1fe + 0x01,
+                .flags = IORESOURCE_MEM,
+        },
+        [2] = {
+                .start = 77,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device cf_ide_device = {
+        .name           =  "pata_platform",
+        .id             =  -1,
+        .num_resources  = ARRAY_SIZE(cf_ide_resources),
+        .resource       = cf_ide_resources,
+};
+
+static struct platform_device jornadakbd_device = {
+        .name           = "jornada680_kbd",
+        .id             = -1,
+};
+
+static struct platform_device *hp6xx_devices[] __initdata = {
+        &cf_ide_device,
+        &jornadakbd_device,
+};
+
+static void __init hp6xx_init_irq(void)
+{
+        /* Gets touchscreen and powerbutton IRQ working */
+        plat_irq_setup_pins(IRQ_MODE_IRQ);
+}
+
+static int __init hp6xx_devices_setup(void)
+{
+        return platform_add_devices(hp6xx_devices, ARRAY_SIZE(hp6xx_devices));
+}
+
+static void __init hp6xx_setup(char **cmdline_p)
+{
+        u8 v8;
+        u16 v;
+
+        v = inw(HD64461_STBCR);
+        v |=    HD64461_STBCR_SURTST | HD64461_STBCR_SIRST      |
+                HD64461_STBCR_STM1ST | HD64461_STBCR_STM0ST     |
+                HD64461_STBCR_SAFEST | HD64461_STBCR_SPC0ST     |
+                HD64461_STBCR_SMIAST | HD64461_STBCR_SAFECKE_OST|
+                HD64461_STBCR_SAFECKE_IST;
+#ifndef CONFIG_HD64461_ENABLER
+        v |= HD64461_STBCR_SPC1ST;
+#endif
+        outw(v, HD64461_STBCR);
+        v = inw(HD64461_GPADR);
+        v |= HD64461_GPADR_SPEAKER | HD64461_GPADR_PCMCIA0;
+        outw(v, HD64461_GPADR);
+
+        outw(HD64461_PCCGCR_VCC0 | HD64461_PCCSCR_VCC1, HD64461_PCC0GCR);
+
+#ifndef CONFIG_HD64461_ENABLER
+        outw(HD64461_PCCGCR_VCC0 | HD64461_PCCSCR_VCC1, HD64461_PCC1GCR);
+#endif
+
+        sh_dac_output(0, DAC_SPEAKER_VOLUME);
+        sh_dac_disable(DAC_SPEAKER_VOLUME);
+        v8 = ctrl_inb(DACR);
+        v8 &= ~DACR_DAE;
+        ctrl_outb(v8,DACR);
+
+        v8 = ctrl_inb(SCPDR);
+        v8 |= SCPDR_TS_SCAN_X | SCPDR_TS_SCAN_Y;
+        v8 &= ~SCPDR_TS_SCAN_ENABLE;
+        ctrl_outb(v8, SCPDR);
+
+        v = ctrl_inw(SCPCR);
+        v &= ~SCPCR_TS_MASK;
+        v |= SCPCR_TS_ENABLE;
+        ctrl_outw(v, SCPCR);
+}
+device_initcall(hp6xx_devices_setup);
+
+static struct sh_machine_vector mv_hp6xx __initmv = {
+        .mv_name = "hp6xx",
+        .mv_setup = hp6xx_setup,
+        /* IRQ's : CPU(64) + CCHIP(16) + FREE_TO_USE(6) */
+        .mv_nr_irqs = HD64461_IRQBASE + HD64461_IRQ_NUM + 6,
+        .mv_irq_demux = hd64461_irq_demux,
+        /* Enable IRQ0 -> IRQ3 in IRQ_MODE */
+        .mv_init_irq = hp6xx_init_irq,
+};
diff --git a/arch/sh/boards/landisk/Makefile b/arch/sh/boards/mach-landisk/Makefile
index a696b4277fa9..a696b4277fa9 100644
--- a/arch/sh/boards/landisk/Makefile
+++ b/arch/sh/boards/mach-landisk/Makefile
diff --git a/arch/sh/boards/mach-landisk/gio.c b/arch/sh/boards/mach-landisk/gio.c
new file mode 100644
index 000000000000..25cdf7358000
--- /dev/null
+++ b/arch/sh/boards/mach-landisk/gio.c
@@ -0,0 +1,171 @@
+/*
+ * arch/sh/boards/landisk/gio.c - driver for landisk
+ *
+ * This driver will also support the I-O DATA Device, Inc. LANDISK Board.
+ * LANDISK and USL-5P Button, LED and GIO driver drive function.
+ *
+ *   Copylight (C) 2006 kogiidena
+ *   Copylight (C) 2002 Atom Create Engineering Co., Ltd. *
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/smp_lock.h>
+#include <linux/kdev_t.h>
+#include <linux/cdev.h>
+#include <linux/fs.h>
+#include <asm/io.h>
+#include <asm/uaccess.h>
+#include <mach-landisk/mach/gio.h>
+#include <mach-landisk/mach/iodata_landisk.h>
+
+#define DEVCOUNT                4
+#define GIO_MINOR               2       /* GIO minor no. */
+
+static dev_t dev;
+static struct cdev *cdev_p;
+static int openCnt;
+
+static int gio_open(struct inode *inode, struct file *filp)
+{
+        int minor;
+        int ret = -ENOENT;
+
+        lock_kernel();
+        minor = MINOR(inode->i_rdev);
+        if (minor < DEVCOUNT) {
+                if (openCnt > 0) {
+                        ret = -EALREADY;
+                } else {
+                        openCnt++;
+                        ret = 0;
+                }
+        }
+        unlock_kernel();
+        return ret;
+}
+
+static int gio_close(struct inode *inode, struct file *filp)
+{
+        int minor;
+
+        minor = MINOR(inode->i_rdev);
+        if (minor < DEVCOUNT) {
+                openCnt--;
+        }
+        return 0;
+}
+
+static int gio_ioctl(struct inode *inode, struct file *filp,
+                             unsigned int cmd, unsigned long arg)
+{
+        unsigned int data;
+        static unsigned int addr = 0;
+
+        if (cmd & 0x01) {       /* write */
+                if (copy_from_user(&data, (int *)arg, sizeof(int))) {
+                        return -EFAULT;
+                }
+        }
+
+        switch (cmd) {
+        case GIODRV_IOCSGIOSETADDR:     /* address set */
+                addr = data;
+                break;
+
+        case GIODRV_IOCSGIODATA1:       /* write byte */
+                ctrl_outb((unsigned char)(0x0ff & data), addr);
+                break;
+
+        case GIODRV_IOCSGIODATA2:       /* write word */
+                if (addr & 0x01) {
+                        return -EFAULT;
+                }
+                ctrl_outw((unsigned short int)(0x0ffff & data), addr);
+                break;
+
+        case GIODRV_IOCSGIODATA4:       /* write long */
+                if (addr & 0x03) {
+                        return -EFAULT;
+                }
+                ctrl_outl(data, addr);
+                break;
+
+        case GIODRV_IOCGGIODATA1:       /* read byte */
+                data = ctrl_inb(addr);
+                break;
+
+        case GIODRV_IOCGGIODATA2:       /* read word */
+                if (addr & 0x01) {
+                        return -EFAULT;
+                }
+                data = ctrl_inw(addr);
+                break;
+
+        case GIODRV_IOCGGIODATA4:       /* read long */
+                if (addr & 0x03) {
+                        return -EFAULT;
+                }
+                data = ctrl_inl(addr);
+                break;
+        default:
+                return -EFAULT;
+                break;
+        }
+
+        if ((cmd & 0x01) == 0) {        /* read */
+                if (copy_to_user((int *)arg, &data, sizeof(int))) {
+                        return -EFAULT;
+                }
+        }
+        return 0;
+}
+
+static const struct file_operations gio_fops = {
+        .owner = THIS_MODULE,
+        .open = gio_open,       /* open */
+        .release = gio_close,   /* release */
+        .ioctl = gio_ioctl,     /* ioctl */
+};
+
+static int __init gio_init(void)
+{
+        int error;
+
+        printk(KERN_INFO "gio: driver initialized\n");
+
+        openCnt = 0;
+
+        if ((error = alloc_chrdev_region(&dev, 0, DEVCOUNT, "gio")) < 0) {
+                printk(KERN_ERR
+                       "gio: Couldn't alloc_chrdev_region, error=%d\n",
+                       error);
+                return 1;
+        }
+
+        cdev_p = cdev_alloc();
+        cdev_p->ops = &gio_fops;
+        error = cdev_add(cdev_p, dev, DEVCOUNT);
+        if (error) {
+                printk(KERN_ERR
+                       "gio: Couldn't cdev_add, error=%d\n", error);
+                return 1;
+        }
+
+        return 0;
+}
+
+static void __exit gio_exit(void)
+{
+        cdev_del(cdev_p);
+        unregister_chrdev_region(dev, DEVCOUNT);
+}
+
+module_init(gio_init);
+module_exit(gio_exit);
+
+MODULE_LICENSE("GPL");
diff --git a/arch/sh/boards/mach-landisk/irq.c b/arch/sh/boards/mach-landisk/irq.c
new file mode 100644
index 000000000000..7b284cde1f58
--- /dev/null
+++ b/arch/sh/boards/mach-landisk/irq.c
@@ -0,0 +1,56 @@
+/*
+ * arch/sh/boards/landisk/irq.c
+ *
+ * I-O DATA Device, Inc. LANDISK Support
+ *
+ * Copyright (C) 2005-2007 kogiidena
+ *
+ * Copyright (C) 2001  Ian da Silva, Jeremy Siegel
+ * Based largely on io_se.c.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <mach-landisk/mach/iodata_landisk.h>
+
+static void disable_landisk_irq(unsigned int irq)
+{
+        unsigned char mask = 0xff ^ (0x01 << (irq - 5));
+
+        ctrl_outb(ctrl_inb(PA_IMASK) & mask, PA_IMASK);
+}
+
+static void enable_landisk_irq(unsigned int irq)
+{
+        unsigned char value = (0x01 << (irq - 5));
+
+        ctrl_outb(ctrl_inb(PA_IMASK) | value, PA_IMASK);
+}
+
+static struct irq_chip landisk_irq_chip __read_mostly = {
+        .name           = "LANDISK",
+        .mask           = disable_landisk_irq,
+        .unmask         = enable_landisk_irq,
+        .mask_ack       = disable_landisk_irq,
+};
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_landisk_IRQ(void)
+{
+        int i;
+
+        for (i = 5; i < 14; i++) {
+                disable_irq_nosync(i);
+                set_irq_chip_and_handler_name(i, &landisk_irq_chip,
+                                              handle_level_irq, "level");
+                enable_landisk_irq(i);
+        }
+        ctrl_outb(0x00, PA_PWRINT_CLR);
+}
diff --git a/arch/sh/boards/mach-landisk/psw.c b/arch/sh/boards/mach-landisk/psw.c
new file mode 100644
index 000000000000..e6b0efa098d1
--- /dev/null
+++ b/arch/sh/boards/mach-landisk/psw.c
@@ -0,0 +1,143 @@
+/*
+ * arch/sh/boards/landisk/psw.c
+ *
+ * push switch support for LANDISK and USL-5P
+ *
+ * Copyright (C) 2006-2007  Paul Mundt
+ * Copyright (C) 2007  kogiidena
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <mach-landisk/mach/iodata_landisk.h>
+#include <asm/push-switch.h>
+
+static irqreturn_t psw_irq_handler(int irq, void *arg)
+{
+        struct platform_device *pdev = arg;
+        struct push_switch *psw = platform_get_drvdata(pdev);
+        struct push_switch_platform_info *psw_info = pdev->dev.platform_data;
+        unsigned int sw_value;
+        int ret = 0;
+
+        sw_value = (0x0ff & (~ctrl_inb(PA_STATUS)));
+
+        /* Nothing to do if there's no state change */
+        if (psw->state) {
+                ret = 1;
+                goto out;
+        }
+
+        /* Figure out who raised it */
+        if (sw_value & (1 << psw_info->bit)) {
+                psw->state = 1;
+                mod_timer(&psw->debounce, jiffies + 50);
+                ret = 1;
+        }
+
+out:
+        /* Clear the switch IRQs */
+        ctrl_outb(0x00, PA_PWRINT_CLR);
+
+        return IRQ_RETVAL(ret);
+}
+
+static struct resource psw_power_resources[] = {
+        [0] = {
+                .start = IRQ_POWER,
+                .flags = IORESOURCE_IRQ,
+       },
+};
+
+static struct resource psw_usl5p_resources[] = {
+        [0] = {
+                .start = IRQ_BUTTON,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+static struct push_switch_platform_info psw_power_platform_data = {
+        .name           = "psw_power",
+        .bit            = 4,
+        .irq_flags      = IRQF_SHARED,
+        .irq_handler    = psw_irq_handler,
+};
+
+static struct push_switch_platform_info psw1_platform_data = {
+        .name           = "psw1",
+        .bit            = 0,
+        .irq_flags      = IRQF_SHARED,
+        .irq_handler    = psw_irq_handler,
+};
+
+static struct push_switch_platform_info psw2_platform_data = {
+        .name           = "psw2",
+        .bit            = 2,
+        .irq_flags      = IRQF_SHARED,
+        .irq_handler    = psw_irq_handler,
+};
+
+static struct push_switch_platform_info psw3_platform_data = {
+        .name           = "psw3",
+        .bit            = 1,
+        .irq_flags      = IRQF_SHARED,
+        .irq_handler    = psw_irq_handler,
+};
+
+static struct platform_device psw_power_switch_device = {
+        .name           = "push-switch",
+        .id             = 0,
+        .num_resources  = ARRAY_SIZE(psw_power_resources),
+        .resource       = psw_power_resources,
+        .dev            = {
+                .platform_data = &psw_power_platform_data,
+        },
+};
+
+static struct platform_device psw1_switch_device = {
+        .name           = "push-switch",
+        .id             = 1,
+        .num_resources  = ARRAY_SIZE(psw_usl5p_resources),
+        .resource       = psw_usl5p_resources,
+        .dev            = {
+                .platform_data = &psw1_platform_data,
+        },
+};
+
+static struct platform_device psw2_switch_device = {
+        .name           = "push-switch",
+        .id             = 2,
+        .num_resources  = ARRAY_SIZE(psw_usl5p_resources),
+        .resource       = psw_usl5p_resources,
+        .dev            = {
+                .platform_data = &psw2_platform_data,
+        },
+};
+
+static struct platform_device psw3_switch_device = {
+        .name           = "push-switch",
+        .id             = 3,
+        .num_resources  = ARRAY_SIZE(psw_usl5p_resources),
+        .resource       = psw_usl5p_resources,
+        .dev = {
+                .platform_data = &psw3_platform_data,
+        },
+};
+
+static struct platform_device *psw_devices[] = {
+        &psw_power_switch_device,
+        &psw1_switch_device,
+        &psw2_switch_device,
+        &psw3_switch_device,
+};
+
+static int __init psw_init(void)
+{
+        return platform_add_devices(psw_devices, ARRAY_SIZE(psw_devices));
+}
+module_init(psw_init);
diff --git a/arch/sh/boards/mach-landisk/setup.c b/arch/sh/boards/mach-landisk/setup.c
new file mode 100644
index 000000000000..db22ea2e6d49
--- /dev/null
+++ b/arch/sh/boards/mach-landisk/setup.c
@@ -0,0 +1,105 @@
+/*
+ * arch/sh/boards/landisk/setup.c
+ *
+ * I-O DATA Device, Inc. LANDISK Support.
+ *
+ * Copyright (C) 2000 Kazumoto Kojima
+ * Copyright (C) 2002 Paul Mundt
+ * Copylight (C) 2002 Atom Create Engineering Co., Ltd.
+ * Copyright (C) 2005-2007 kogiidena
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/pm.h>
+#include <linux/mm.h>
+#include <asm/machvec.h>
+#include <mach-landisk/mach/iodata_landisk.h>
+#include <asm/io.h>
+
+void init_landisk_IRQ(void);
+
+static void landisk_power_off(void)
+{
+        ctrl_outb(0x01, PA_SHUTDOWN);
+}
+
+static struct resource cf_ide_resources[3];
+
+static struct pata_platform_info pata_info = {
+        .ioport_shift   = 1,
+};
+
+static struct platform_device cf_ide_device = {
+        .name           = "pata_platform",
+        .id             = -1,
+        .num_resources  = ARRAY_SIZE(cf_ide_resources),
+        .resource       = cf_ide_resources,
+        .dev            = {
+                .platform_data = &pata_info,
+        },
+};
+
+static struct platform_device rtc_device = {
+        .name           = "rs5c313",
+        .id             = -1,
+};
+
+static struct platform_device *landisk_devices[] __initdata = {
+        &cf_ide_device,
+        &rtc_device,
+};
+
+static int __init landisk_devices_setup(void)
+{
+        pgprot_t prot;
+        unsigned long paddrbase;
+        void *cf_ide_base;
+
+        /* open I/O area window */
+        paddrbase = virt_to_phys((void *)PA_AREA5_IO);
+        prot = PAGE_KERNEL_PCC(1, _PAGE_PCC_IO16);
+        cf_ide_base = p3_ioremap(paddrbase, PAGE_SIZE, prot.pgprot);
+        if (!cf_ide_base) {
+                printk("allocate_cf_area : can't open CF I/O window!\n");
+                return -ENOMEM;
+        }
+
+        /* IDE cmd address : 0x1f0-0x1f7 and 0x3f6 */
+        cf_ide_resources[0].start = (unsigned long)cf_ide_base + 0x40;
+        cf_ide_resources[0].end   = (unsigned long)cf_ide_base + 0x40 + 0x0f;
+        cf_ide_resources[0].flags = IORESOURCE_IO;
+        cf_ide_resources[1].start = (unsigned long)cf_ide_base + 0x2c;
+        cf_ide_resources[1].end   = (unsigned long)cf_ide_base + 0x2c + 0x03;
+        cf_ide_resources[1].flags = IORESOURCE_IO;
+        cf_ide_resources[2].start = IRQ_FATA;
+        cf_ide_resources[2].flags = IORESOURCE_IRQ;
+
+        return platform_add_devices(landisk_devices,
+                                    ARRAY_SIZE(landisk_devices));
+}
+
+__initcall(landisk_devices_setup);
+
+static void __init landisk_setup(char **cmdline_p)
+{
+        /* LED ON */
+        ctrl_outb(ctrl_inb(PA_LED) | 0x03, PA_LED);
+
+        printk(KERN_INFO "I-O DATA DEVICE, INC. \"LANDISK Series\" support.\n");
+        pm_power_off = landisk_power_off;
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_landisk __initmv = {
+        .mv_name = "LANDISK",
+        .mv_nr_irqs = 72,
+        .mv_setup = landisk_setup,
+        .mv_init_irq = init_landisk_IRQ,
+};
diff --git a/arch/sh/boards/lboxre2/Makefile b/arch/sh/boards/mach-lboxre2/Makefile
index e9ed140c06f6..e9ed140c06f6 100644
--- a/arch/sh/boards/lboxre2/Makefile
+++ b/arch/sh/boards/mach-lboxre2/Makefile
diff --git a/arch/sh/boards/lboxre2/irq.c b/arch/sh/boards/mach-lboxre2/irq.c
index 5a1c3bbe7b50..5a1c3bbe7b50 100644
--- a/arch/sh/boards/lboxre2/irq.c
+++ b/arch/sh/boards/mach-lboxre2/irq.c
diff --git a/arch/sh/boards/lboxre2/setup.c b/arch/sh/boards/mach-lboxre2/setup.c
index c74440d38ee9..c74440d38ee9 100644
--- a/arch/sh/boards/lboxre2/setup.c
+++ b/arch/sh/boards/mach-lboxre2/setup.c
diff --git a/arch/sh/boards/superh/microdev/Makefile b/arch/sh/boards/mach-microdev/Makefile
index 1387dd6c85eb..1387dd6c85eb 100644
--- a/arch/sh/boards/superh/microdev/Makefile
+++ b/arch/sh/boards/mach-microdev/Makefile
diff --git a/arch/sh/boards/superh/microdev/io.c b/arch/sh/boards/mach-microdev/io.c
index 9f8a540f7e14..9f8a540f7e14 100644
--- a/arch/sh/boards/superh/microdev/io.c
+++ b/arch/sh/boards/mach-microdev/io.c
diff --git a/arch/sh/boards/superh/microdev/irq.c b/arch/sh/boards/mach-microdev/irq.c
index 4d335077a3ff..4d335077a3ff 100644
--- a/arch/sh/boards/superh/microdev/irq.c
+++ b/arch/sh/boards/mach-microdev/irq.c
diff --git a/arch/sh/boards/superh/microdev/led.c b/arch/sh/boards/mach-microdev/led.c
index 36e54b47a752..36e54b47a752 100644
--- a/arch/sh/boards/superh/microdev/led.c
+++ b/arch/sh/boards/mach-microdev/led.c
diff --git a/arch/sh/boards/superh/microdev/setup.c b/arch/sh/boards/mach-microdev/setup.c
index fc8cd06d66cf..fc8cd06d66cf 100644
--- a/arch/sh/boards/superh/microdev/setup.c
+++ b/arch/sh/boards/mach-microdev/setup.c
diff --git a/arch/sh/boards/mach-migor/Kconfig b/arch/sh/boards/mach-migor/Kconfig
new file mode 100644
index 000000000000..a7b3b728ec3c
--- /dev/null
+++ b/arch/sh/boards/mach-migor/Kconfig
@@ -0,0 +1,15 @@
+if SH_MIGOR
+
+choice
+        prompt "Migo-R LCD Panel Board Selection"
+        default SH_MIGOR_QVGA
+
+config SH_MIGOR_QVGA
+        bool "QVGA (320x240)"
+
+config SH_MIGOR_RTA_WVGA
+        bool "RTA WVGA (800x480)"
+
+endchoice
+
+endif
diff --git a/arch/sh/boards/mach-migor/Makefile b/arch/sh/boards/mach-migor/Makefile
new file mode 100644
index 000000000000..5f231dd25c0e
--- /dev/null
+++ b/arch/sh/boards/mach-migor/Makefile
@@ -0,0 +1,2 @@
+obj-y    := setup.o
+obj-$(CONFIG_SH_MIGOR_QVGA)     +=  lcd_qvga.o
diff --git a/arch/sh/boards/mach-migor/lcd_qvga.c b/arch/sh/boards/mach-migor/lcd_qvga.c
new file mode 100644
index 000000000000..6e9609596448
--- /dev/null
+++ b/arch/sh/boards/mach-migor/lcd_qvga.c
@@ -0,0 +1,165 @@
+/*
+ * Support for SuperH MigoR Quarter VGA LCD Panel
+ *
+ * Copyright (C) 2008 Magnus Damm
+ *
+ * Based on lcd_powertip.c from Kenati Technologies Pvt Ltd.
+ * Copyright (c) 2007 Ujjwal Pande <ujjwal@kenati.com>,
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <asm/sh_mobile_lcdc.h>
+#include <asm/migor.h>
+
+/* LCD Module is a PH240320T according to board schematics. This module
+ * is made up of a 240x320 LCD hooked up to a R61505U (or HX8347-A01?)
+ * Driver IC. This IC is connected to the SH7722 built-in LCDC using a
+ * SYS-80 interface configured in 16 bit mode.
+ *
+ * Index 0: "Device Code Read" returns 0x1505.
+ */
+
+static void reset_lcd_module(void)
+{
+        ctrl_outb(ctrl_inb(PORT_PHDR) & ~0x04, PORT_PHDR);
+        mdelay(2);
+        ctrl_outb(ctrl_inb(PORT_PHDR) | 0x04, PORT_PHDR);
+        mdelay(1);
+}
+
+/* DB0-DB7 are connected to D1-D8, and DB8-DB15 to D10-D17 */
+
+static unsigned long adjust_reg18(unsigned short data)
+{
+        unsigned long tmp1, tmp2;
+
+        tmp1 = (data<<1 | 0x00000001) & 0x000001FF;
+        tmp2 = (data<<2 | 0x00000200) & 0x0003FE00;
+        return tmp1 | tmp2;
+}
+
+static void write_reg(void *sys_ops_handle,
+                       struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
+                       unsigned short reg, unsigned short data)
+{
+        sys_ops->write_index(sys_ops_handle, adjust_reg18(reg << 8 | data));
+}
+
+static void write_reg16(void *sys_ops_handle,
+                        struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
+                        unsigned short reg, unsigned short data)
+{
+        sys_ops->write_index(sys_ops_handle, adjust_reg18(reg));
+        sys_ops->write_data(sys_ops_handle, adjust_reg18(data));
+}
+
+static unsigned long read_reg16(void *sys_ops_handle,
+                                struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
+                                unsigned short reg)
+{
+        unsigned long data;
+
+        sys_ops->write_index(sys_ops_handle, adjust_reg18(reg));
+        data = sys_ops->read_data(sys_ops_handle);
+        return ((data >> 1) & 0xff) | ((data >> 2) & 0xff00);
+}
+
+static void migor_lcd_qvga_seq(void *sys_ops_handle,
+                               struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
+                               unsigned short const *data, int no_data)
+{
+        int i;
+
+        for (i = 0; i < no_data; i += 2)
+                write_reg16(sys_ops_handle, sys_ops, data[i], data[i + 1]);
+}
+
+static const unsigned short sync_data[] = {
+        0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+};
+
+static const unsigned short magic0_data[] = {
+        0x0060, 0x2700, 0x0008, 0x0808, 0x0090, 0x001A, 0x0007, 0x0001,
+        0x0017, 0x0001, 0x0019, 0x0000, 0x0010, 0x17B0, 0x0011, 0x0116,
+        0x0012, 0x0198, 0x0013, 0x1400, 0x0029, 0x000C, 0x0012, 0x01B8,
+};
+
+static const unsigned short magic1_data[] = {
+        0x0030, 0x0307, 0x0031, 0x0303, 0x0032, 0x0603, 0x0033, 0x0202,
+        0x0034, 0x0202, 0x0035, 0x0202, 0x0036, 0x1F1F, 0x0037, 0x0303,
+        0x0038, 0x0303, 0x0039, 0x0603, 0x003A, 0x0202, 0x003B, 0x0102,
+        0x003C, 0x0204, 0x003D, 0x0000, 0x0001, 0x0100, 0x0002, 0x0300,
+        0x0003, 0x5028, 0x0020, 0x00ef, 0x0021, 0x0000, 0x0004, 0x0000,
+        0x0009, 0x0000, 0x000A, 0x0008, 0x000C, 0x0000, 0x000D, 0x0000,
+        0x0015, 0x8000,
+};
+
+static const unsigned short magic2_data[] = {
+        0x0061, 0x0001, 0x0092, 0x0100, 0x0093, 0x0001, 0x0007, 0x0021,
+};
+
+static const unsigned short magic3_data[] = {
+        0x0010, 0x16B0, 0x0011, 0x0111, 0x0007, 0x0061,
+};
+
+int migor_lcd_qvga_setup(void *board_data, void *sohandle,
+                         struct sh_mobile_lcdc_sys_bus_ops *so)
+{
+        unsigned long xres = 320;
+        unsigned long yres = 240;
+        int k;
+
+        reset_lcd_module();
+        migor_lcd_qvga_seq(sohandle, so, sync_data, ARRAY_SIZE(sync_data));
+
+        if (read_reg16(sohandle, so, 0) != 0x1505)
+                return -ENODEV;
+
+        pr_info("Migo-R QVGA LCD Module detected.\n");
+
+        migor_lcd_qvga_seq(sohandle, so, sync_data, ARRAY_SIZE(sync_data));
+        write_reg16(sohandle, so, 0x00A4, 0x0001);
+        mdelay(10);
+
+        migor_lcd_qvga_seq(sohandle, so, magic0_data, ARRAY_SIZE(magic0_data));
+        mdelay(100);
+
+        migor_lcd_qvga_seq(sohandle, so, magic1_data, ARRAY_SIZE(magic1_data));
+        write_reg16(sohandle, so, 0x0050, 0xef - (yres - 1));
+        write_reg16(sohandle, so, 0x0051, 0x00ef);
+        write_reg16(sohandle, so, 0x0052, 0x0000);
+        write_reg16(sohandle, so, 0x0053, xres - 1);
+
+        migor_lcd_qvga_seq(sohandle, so, magic2_data, ARRAY_SIZE(magic2_data));
+        mdelay(10);
+
+        migor_lcd_qvga_seq(sohandle, so, magic3_data, ARRAY_SIZE(magic3_data));
+        mdelay(40);
+
+        /* clear GRAM to avoid displaying garbage */
+
+        write_reg16(sohandle, so, 0x0020, 0x0000); /* horiz addr */
+        write_reg16(sohandle, so, 0x0021, 0x0000); /* vert addr */
+
+        for (k = 0; k < (xres * 256); k++) /* yes, 256 words per line */
+                write_reg16(sohandle, so, 0x0022, 0x0000);
+
+        write_reg16(sohandle, so, 0x0020, 0x0000); /* reset horiz addr */
+        write_reg16(sohandle, so, 0x0021, 0x0000); /* reset vert addr */
+        write_reg16(sohandle, so, 0x0007, 0x0173);
+        mdelay(40);
+
+        /* enable display */
+        write_reg(sohandle, so, 0x00, 0x22);
+        mdelay(100);
+        return 0;
+}
diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c
new file mode 100644
index 000000000000..e499ee384d58
--- /dev/null
+++ b/arch/sh/boards/mach-migor/setup.c
@@ -0,0 +1,527 @@
+/*
+ * Renesas System Solutions Asia Pte. Ltd - Migo-R
+ *
+ * Copyright (C) 2008 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/nand.h>
+#include <linux/i2c.h>
+#include <linux/smc91x.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <media/soc_camera_platform.h>
+#include <media/sh_mobile_ceu.h>
+#include <asm/clock.h>
+#include <asm/machvec.h>
+#include <asm/io.h>
+#include <asm/sh_keysc.h>
+#include <asm/sh_mobile_lcdc.h>
+#include <asm/migor.h>
+
+/* Address     IRQ  Size  Bus  Description
+ * 0x00000000       64MB  16   NOR Flash (SP29PL256N)
+ * 0x0c000000       64MB  64   SDRAM (2xK4M563233G)
+ * 0x10000000  IRQ0       16   Ethernet (SMC91C111)
+ * 0x14000000  IRQ4       16   USB 2.0 Host Controller (M66596)
+ * 0x18000000       8GB    8   NAND Flash (K9K8G08U0A)
+ */
+
+static struct smc91x_platdata smc91x_info = {
+        .flags = SMC91X_USE_16BIT,
+};
+
+static struct resource smc91x_eth_resources[] = {
+        [0] = {
+                .name   = "SMC91C111" ,
+                .start  = 0x10000300,
+                .end    = 0x1000030f,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = 32, /* IRQ0 */
+                .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+        },
+};
+
+static struct platform_device smc91x_eth_device = {
+        .name           = "smc91x",
+        .num_resources  = ARRAY_SIZE(smc91x_eth_resources),
+        .resource       = smc91x_eth_resources,
+        .dev    = {
+                .platform_data  = &smc91x_info,
+        },
+};
+
+static struct sh_keysc_info sh_keysc_info = {
+        .mode = SH_KEYSC_MODE_2, /* KEYOUT0->4, KEYIN1->5 */
+        .scan_timing = 3,
+        .delay = 5,
+        .keycodes = {
+                0, KEY_UP, KEY_DOWN, KEY_LEFT, KEY_RIGHT, KEY_ENTER,
+                0, KEY_F, KEY_C, KEY_D, KEY_H, KEY_1,
+                0, KEY_2, KEY_3, KEY_4, KEY_5, KEY_6,
+                0, KEY_7, KEY_8, KEY_9, KEY_S, KEY_0,
+                0, KEY_P, KEY_STOP, KEY_REWIND, KEY_PLAY, KEY_FASTFORWARD,
+        },
+};
+
+static struct resource sh_keysc_resources[] = {
+        [0] = {
+                .start  = 0x044b0000,
+                .end    = 0x044b000f,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = 79,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device sh_keysc_device = {
+        .name           = "sh_keysc",
+        .num_resources  = ARRAY_SIZE(sh_keysc_resources),
+        .resource       = sh_keysc_resources,
+        .dev    = {
+                .platform_data  = &sh_keysc_info,
+        },
+};
+
+static struct mtd_partition migor_nor_flash_partitions[] =
+{
+        {
+                .name = "uboot",
+                .offset = 0,
+                .size = (1 * 1024 * 1024),
+                .mask_flags = MTD_WRITEABLE,    /* Read-only */
+        },
+        {
+                .name = "rootfs",
+                .offset = MTDPART_OFS_APPEND,
+                .size = (15 * 1024 * 1024),
+        },
+        {
+                .name = "other",
+                .offset = MTDPART_OFS_APPEND,
+                .size = MTDPART_SIZ_FULL,
+        },
+};
+
+static struct physmap_flash_data migor_nor_flash_data = {
+        .width          = 2,
+        .parts          = migor_nor_flash_partitions,
+        .nr_parts       = ARRAY_SIZE(migor_nor_flash_partitions),
+};
+
+static struct resource migor_nor_flash_resources[] = {
+        [0] = {
+                .name           = "NOR Flash",
+                .start          = 0x00000000,
+                .end            = 0x03ffffff,
+                .flags          = IORESOURCE_MEM,
+        }
+};
+
+static struct platform_device migor_nor_flash_device = {
+        .name           = "physmap-flash",
+        .resource       = migor_nor_flash_resources,
+        .num_resources  = ARRAY_SIZE(migor_nor_flash_resources),
+        .dev            = {
+                .platform_data = &migor_nor_flash_data,
+        },
+};
+
+static struct mtd_partition migor_nand_flash_partitions[] = {
+        {
+                .name           = "nanddata1",
+                .offset         = 0x0,
+                .size           = 512 * 1024 * 1024,
+        },
+        {
+                .name           = "nanddata2",
+                .offset         = MTDPART_OFS_APPEND,
+                .size           = 512 * 1024 * 1024,
+        },
+};
+
+static void migor_nand_flash_cmd_ctl(struct mtd_info *mtd, int cmd,
+                                     unsigned int ctrl)
+{
+        struct nand_chip *chip = mtd->priv;
+
+        if (cmd == NAND_CMD_NONE)
+                return;
+
+        if (ctrl & NAND_CLE)
+                writeb(cmd, chip->IO_ADDR_W + 0x00400000);
+        else if (ctrl & NAND_ALE)
+                writeb(cmd, chip->IO_ADDR_W + 0x00800000);
+        else
+                writeb(cmd, chip->IO_ADDR_W);
+}
+
+static int migor_nand_flash_ready(struct mtd_info *mtd)
+{
+        return ctrl_inb(PORT_PADR) & 0x02; /* PTA1 */
+}
+
+struct platform_nand_data migor_nand_flash_data = {
+        .chip = {
+                .nr_chips = 1,
+                .partitions = migor_nand_flash_partitions,
+                .nr_partitions = ARRAY_SIZE(migor_nand_flash_partitions),
+                .chip_delay = 20,
+                .part_probe_types = (const char *[]) { "cmdlinepart", NULL },
+        },
+        .ctrl = {
+                .dev_ready = migor_nand_flash_ready,
+                .cmd_ctrl = migor_nand_flash_cmd_ctl,
+        },
+};
+
+static struct resource migor_nand_flash_resources[] = {
+        [0] = {
+                .name           = "NAND Flash",
+                .start          = 0x18000000,
+                .end            = 0x18ffffff,
+                .flags          = IORESOURCE_MEM,
+        },
+};
+
+static struct platform_device migor_nand_flash_device = {
+        .name           = "gen_nand",
+        .resource       = migor_nand_flash_resources,
+        .num_resources  = ARRAY_SIZE(migor_nand_flash_resources),
+        .dev            = {
+                .platform_data = &migor_nand_flash_data,
+        }
+};
+
+static struct sh_mobile_lcdc_info sh_mobile_lcdc_info = {
+#ifdef CONFIG_SH_MIGOR_RTA_WVGA
+        .clock_source = LCDC_CLK_BUS,
+        .ch[0] = {
+                .chan = LCDC_CHAN_MAINLCD,
+                .bpp = 16,
+                .interface_type = RGB16,
+                .clock_divider = 2,
+                .lcd_cfg = {
+                        .name = "LB070WV1",
+                        .xres = 800,
+                        .yres = 480,
+                        .left_margin = 64,
+                        .right_margin = 16,
+                        .hsync_len = 120,
+                        .upper_margin = 1,
+                        .lower_margin = 17,
+                        .vsync_len = 2,
+                        .sync = 0,
+                },
+        }
+#endif
+#ifdef CONFIG_SH_MIGOR_QVGA
+        .clock_source = LCDC_CLK_PERIPHERAL,
+        .ch[0] = {
+                .chan = LCDC_CHAN_MAINLCD,
+                .bpp = 16,
+                .interface_type = SYS16A,
+                .clock_divider = 10,
+                .lcd_cfg = {
+                        .name = "PH240320T",
+                        .xres = 320,
+                        .yres = 240,
+                        .left_margin = 0,
+                        .right_margin = 16,
+                        .hsync_len = 8,
+                        .upper_margin = 1,
+                        .lower_margin = 17,
+                        .vsync_len = 2,
+                        .sync = FB_SYNC_HOR_HIGH_ACT,
+                },
+                .board_cfg = {
+                        .setup_sys = migor_lcd_qvga_setup,
+                },
+                .sys_bus_cfg = {
+                        .ldmt2r = 0x06000a09,
+                        .ldmt3r = 0x180e3418,
+                },
+        }
+#endif
+};
+
+static struct resource migor_lcdc_resources[] = {
+        [0] = {
+                .name   = "LCDC",
+                .start  = 0xfe940000, /* P4-only space */
+                .end    = 0xfe941fff,
+                .flags  = IORESOURCE_MEM,
+        },
+};
+
+static struct platform_device migor_lcdc_device = {
+        .name           = "sh_mobile_lcdc_fb",
+        .num_resources  = ARRAY_SIZE(migor_lcdc_resources),
+        .resource       = migor_lcdc_resources,
+        .dev    = {
+                .platform_data  = &sh_mobile_lcdc_info,
+        },
+};
+
+static struct clk *camera_clk;
+
+static void camera_power_on(void)
+{
+        unsigned char value;
+
+        camera_clk = clk_get(NULL, "video_clk");
+        clk_set_rate(camera_clk, 24000000);
+        clk_enable(camera_clk); /* start VIO_CKO */
+
+        mdelay(10);
+        value = ctrl_inb(PORT_PTDR);
+        value &= ~0x09;
+#ifndef CONFIG_SH_MIGOR_RTA_WVGA
+        value |= 0x01;
+#endif
+        ctrl_outb(value, PORT_PTDR);
+        mdelay(10);
+
+        ctrl_outb(value | 8, PORT_PTDR);
+}
+
+static void camera_power_off(void)
+{
+        clk_disable(camera_clk); /* stop VIO_CKO */
+        clk_put(camera_clk);
+
+        ctrl_outb(ctrl_inb(PORT_PTDR) & ~0x08, PORT_PTDR);
+}
+
+#ifdef CONFIG_I2C
+static unsigned char camera_ov772x_magic[] =
+{
+        0x09, 0x01, 0x0c, 0x10, 0x0d, 0x41, 0x0e, 0x01,
+        0x12, 0x00, 0x13, 0x8F, 0x14, 0x4A, 0x15, 0x00,
+        0x16, 0x00, 0x17, 0x23, 0x18, 0xa0, 0x19, 0x07,
+        0x1a, 0xf0, 0x1b, 0x40, 0x1f, 0x00, 0x20, 0x10,
+        0x22, 0xff, 0x23, 0x01, 0x28, 0x00, 0x29, 0xa0,
+        0x2a, 0x00, 0x2b, 0x00, 0x2c, 0xf0, 0x2d, 0x00,
+        0x2e, 0x00, 0x30, 0x80, 0x31, 0x60, 0x32, 0x00,
+        0x33, 0x00, 0x34, 0x00, 0x3d, 0x80, 0x3e, 0xe2,
+        0x3f, 0x1f, 0x42, 0x80, 0x43, 0x80, 0x44, 0x80,
+        0x45, 0x80, 0x46, 0x00, 0x47, 0x00, 0x48, 0x00,
+        0x49, 0x50, 0x4a, 0x30, 0x4b, 0x50, 0x4c, 0x50,
+        0x4d, 0x00, 0x4e, 0xef, 0x4f, 0x10, 0x50, 0x60,
+        0x51, 0x00, 0x52, 0x00, 0x53, 0x24, 0x54, 0x7a,
+        0x55, 0xfc, 0x62, 0xff, 0x63, 0xf0, 0x64, 0x1f,
+        0x65, 0x00, 0x66, 0x10, 0x67, 0x00, 0x68, 0x00,
+        0x69, 0x5c, 0x6a, 0x11, 0x6b, 0xa2, 0x6c, 0x01,
+        0x6d, 0x50, 0x6e, 0x80, 0x6f, 0x80, 0x70, 0x0f,
+        0x71, 0x00, 0x72, 0x00, 0x73, 0x0f, 0x74, 0x0f,
+        0x75, 0xff, 0x78, 0x10, 0x79, 0x70, 0x7a, 0x70,
+        0x7b, 0xf0, 0x7c, 0xf0, 0x7d, 0xf0, 0x7e, 0x0e,
+        0x7f, 0x1a, 0x80, 0x31, 0x81, 0x5a, 0x82, 0x69,
+        0x83, 0x75, 0x84, 0x7e, 0x85, 0x88, 0x86, 0x8f,
+        0x87, 0x96, 0x88, 0xa3, 0x89, 0xaf, 0x8a, 0xc4,
+        0x8b, 0xd7, 0x8c, 0xe8, 0x8d, 0x20, 0x8e, 0x00,
+        0x8f, 0x00, 0x90, 0x08, 0x91, 0x10, 0x92, 0x1f,
+        0x93, 0x01, 0x94, 0x2c, 0x95, 0x24, 0x96, 0x08,
+        0x97, 0x14, 0x98, 0x24, 0x99, 0x38, 0x9a, 0x9e,
+        0x9b, 0x00, 0x9c, 0x40, 0x9e, 0x11, 0x9f, 0x02,
+        0xa0, 0x00, 0xa1, 0x40, 0xa2, 0x40, 0xa3, 0x06,
+        0xa4, 0x00, 0xa6, 0x00, 0xa7, 0x40, 0xa8, 0x40,
+        0xa9, 0x80, 0xaa, 0x80, 0xab, 0x06, 0xac, 0xff,
+        0x12, 0x06, 0x64, 0x3f, 0x12, 0x46, 0x17, 0x3f,
+        0x18, 0x50, 0x19, 0x03, 0x1a, 0x78, 0x29, 0x50,
+        0x2c, 0x78,
+};
+
+static int ov772x_set_capture(struct soc_camera_platform_info *info,
+                              int enable)
+{
+        struct i2c_adapter *a = i2c_get_adapter(0);
+        struct i2c_msg msg;
+        int ret = 0;
+        int i;
+
+        if (!enable)
+                return 0; /* camera_power_off() is enough */
+
+        for (i = 0; i < ARRAY_SIZE(camera_ov772x_magic); i += 2) {
+                u_int8_t buf[8];
+
+                msg.addr = 0x21;
+                msg.buf = buf;
+                msg.len = 2;
+                msg.flags = 0;
+
+                buf[0] = camera_ov772x_magic[i];
+                buf[1] = camera_ov772x_magic[i + 1];
+
+                ret = (ret < 0) ? ret : i2c_transfer(a, &msg, 1);
+        }
+
+        return ret;
+}
+
+static struct soc_camera_platform_info ov772x_info = {
+        .iface = 0,
+        .format_name = "RGB565",
+        .format_depth = 16,
+        .format = {
+                .pixelformat = V4L2_PIX_FMT_RGB565,
+                .colorspace = V4L2_COLORSPACE_SRGB,
+                .width = 320,
+                .height = 240,
+        },
+        .bus_param =  SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH |
+        SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8,
+        .set_capture = ov772x_set_capture,
+};
+
+static struct platform_device migor_camera_device = {
+        .name           = "soc_camera_platform",
+        .dev    = {
+                .platform_data  = &ov772x_info,
+        },
+};
+#endif /* CONFIG_I2C */
+
+static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
+        .flags = SOCAM_MASTER | SOCAM_DATAWIDTH_8 | SOCAM_PCLK_SAMPLE_RISING \
+        | SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_HIGH,
+        .enable_camera = camera_power_on,
+        .disable_camera = camera_power_off,
+};
+
+static struct resource migor_ceu_resources[] = {
+        [0] = {
+                .name   = "CEU",
+                .start  = 0xfe910000,
+                .end    = 0xfe91009f,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = 52,
+                .flags  = IORESOURCE_IRQ,
+        },
+        [2] = {
+                /* place holder for contiguous memory */
+        },
+};
+
+static struct platform_device migor_ceu_device = {
+        .name           = "sh_mobile_ceu",
+        .num_resources  = ARRAY_SIZE(migor_ceu_resources),
+        .resource       = migor_ceu_resources,
+        .dev    = {
+                .platform_data  = &sh_mobile_ceu_info,
+        },
+};
+
+static struct platform_device *migor_devices[] __initdata = {
+        &smc91x_eth_device,
+        &sh_keysc_device,
+        &migor_lcdc_device,
+        &migor_ceu_device,
+#ifdef CONFIG_I2C
+        &migor_camera_device,
+#endif
+        &migor_nor_flash_device,
+        &migor_nand_flash_device,
+};
+
+static struct i2c_board_info migor_i2c_devices[] = {
+        {
+                I2C_BOARD_INFO("rs5c372b", 0x32),
+        },
+        {
+                I2C_BOARD_INFO("migor_ts", 0x51),
+                .irq = 38, /* IRQ6 */
+        },
+};
+
+static int __init migor_devices_setup(void)
+{
+        clk_always_enable("mstp214"); /* KEYSC */
+        clk_always_enable("mstp200"); /* LCDC */
+        clk_always_enable("mstp203"); /* CEU */
+
+        platform_resource_setup_memory(&migor_ceu_device, "ceu", 4 << 20);
+
+        i2c_register_board_info(0, migor_i2c_devices,
+                                ARRAY_SIZE(migor_i2c_devices));
+ 
+        return platform_add_devices(migor_devices, ARRAY_SIZE(migor_devices));
+}
+__initcall(migor_devices_setup);
+
+static void __init migor_setup(char **cmdline_p)
+{
+        /* SMC91C111 - Enable IRQ0 */
+        ctrl_outw(ctrl_inw(PORT_PJCR) & ~0x0003, PORT_PJCR);
+
+        /* KEYSC */
+        ctrl_outw(ctrl_inw(PORT_PYCR) & ~0x0fff, PORT_PYCR);
+        ctrl_outw(ctrl_inw(PORT_PZCR) & ~0x0ff0, PORT_PZCR);
+        ctrl_outw(ctrl_inw(PORT_PSELA) & ~0x4100, PORT_PSELA);
+        ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x4000, PORT_HIZCRA);
+        ctrl_outw(ctrl_inw(PORT_HIZCRC) & ~0xc000, PORT_HIZCRC);
+
+        /* NAND Flash */
+        ctrl_outw(ctrl_inw(PORT_PXCR) & 0x0fff, PORT_PXCR);
+        ctrl_outl((ctrl_inl(BSC_CS6ABCR) & ~0x00000600) | 0x00000200,
+                  BSC_CS6ABCR);
+
+        /* Touch Panel - Enable IRQ6 */
+        ctrl_outw(ctrl_inw(PORT_PZCR) & ~0xc, PORT_PZCR);
+        ctrl_outw((ctrl_inw(PORT_PSELA) | 0x8000), PORT_PSELA);
+        ctrl_outw((ctrl_inw(PORT_HIZCRC) & ~0x4000), PORT_HIZCRC);
+
+#ifdef CONFIG_SH_MIGOR_RTA_WVGA
+        /* LCDC - WVGA - Enable RGB Interface signals */
+        ctrl_outw(ctrl_inw(PORT_PACR) & ~0x0003, PORT_PACR);
+        ctrl_outw(0x0000, PORT_PHCR);
+        ctrl_outw(0x0000, PORT_PLCR);
+        ctrl_outw(0x0000, PORT_PMCR);
+        ctrl_outw(ctrl_inw(PORT_PRCR) & ~0x000f, PORT_PRCR);
+        ctrl_outw((ctrl_inw(PORT_PSELD) & ~0x000d) | 0x0400, PORT_PSELD);
+        ctrl_outw(ctrl_inw(PORT_MSELCRB) & ~0x0100, PORT_MSELCRB);
+        ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x01e0, PORT_HIZCRA);
+#endif
+#ifdef CONFIG_SH_MIGOR_QVGA
+        /* LCDC - QVGA - Enable SYS Interface signals */
+        ctrl_outw(ctrl_inw(PORT_PACR) & ~0x0003, PORT_PACR);
+        ctrl_outw((ctrl_inw(PORT_PHCR) & ~0xcfff) | 0x0010, PORT_PHCR);
+        ctrl_outw(0x0000, PORT_PLCR);
+        ctrl_outw(0x0000, PORT_PMCR);
+        ctrl_outw(ctrl_inw(PORT_PRCR) & ~0x030f, PORT_PRCR);
+        ctrl_outw((ctrl_inw(PORT_PSELD) & ~0x0001) | 0x0420, PORT_PSELD);
+        ctrl_outw(ctrl_inw(PORT_MSELCRB) | 0x0100, PORT_MSELCRB);
+        ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x01e0, PORT_HIZCRA);
+#endif
+
+        /* CEU */
+        ctrl_outw((ctrl_inw(PORT_PTCR) & ~0x03c3) | 0x0051, PORT_PTCR);
+        ctrl_outw(ctrl_inw(PORT_PUCR) & ~0x03ff, PORT_PUCR);
+        ctrl_outw(ctrl_inw(PORT_PVCR) & ~0x03ff, PORT_PVCR);
+        ctrl_outw(ctrl_inw(PORT_PWCR) & ~0x3c00, PORT_PWCR);
+        ctrl_outw(ctrl_inw(PORT_PSELC) | 0x0001, PORT_PSELC);
+        ctrl_outw(ctrl_inw(PORT_PSELD) & ~0x2000, PORT_PSELD);
+        ctrl_outw(ctrl_inw(PORT_PSELE) | 0x000f, PORT_PSELE);
+        ctrl_outw(ctrl_inw(PORT_MSELCRB) | 0x2200, PORT_MSELCRB);
+        ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x0a00, PORT_HIZCRA);
+        ctrl_outw(ctrl_inw(PORT_HIZCRB) & ~0x0003, PORT_HIZCRB);
+}
+
+static struct sh_machine_vector mv_migor __initmv = {
+        .mv_name                = "Migo-R",
+        .mv_setup               = migor_setup,
+};
diff --git a/arch/sh/boards/renesas/rts7751r2d/Kconfig b/arch/sh/boards/mach-r2d/Kconfig
index 8122a9667fc9..8122a9667fc9 100644
--- a/arch/sh/boards/renesas/rts7751r2d/Kconfig
+++ b/arch/sh/boards/mach-r2d/Kconfig
diff --git a/arch/sh/boards/renesas/rts7751r2d/Makefile b/arch/sh/boards/mach-r2d/Makefile
index 0d4c75a72be0..0d4c75a72be0 100644
--- a/arch/sh/boards/renesas/rts7751r2d/Makefile
+++ b/arch/sh/boards/mach-r2d/Makefile
diff --git a/arch/sh/boards/renesas/rts7751r2d/irq.c b/arch/sh/boards/mach-r2d/irq.c
index 8e49f6e51247..8e49f6e51247 100644
--- a/arch/sh/boards/renesas/rts7751r2d/irq.c
+++ b/arch/sh/boards/mach-r2d/irq.c
diff --git a/arch/sh/boards/renesas/rts7751r2d/setup.c b/arch/sh/boards/mach-r2d/setup.c
index 2308e8753bcd..2308e8753bcd 100644
--- a/arch/sh/boards/renesas/rts7751r2d/setup.c
+++ b/arch/sh/boards/mach-r2d/setup.c
diff --git a/arch/sh/boards/renesas/sdk7780/Kconfig b/arch/sh/boards/mach-sdk7780/Kconfig
index 065f1df09bf1..065f1df09bf1 100644
--- a/arch/sh/boards/renesas/sdk7780/Kconfig
+++ b/arch/sh/boards/mach-sdk7780/Kconfig
diff --git a/arch/sh/boards/renesas/sdk7780/Makefile b/arch/sh/boards/mach-sdk7780/Makefile
index 3d8f0befc35d..3d8f0befc35d 100644
--- a/arch/sh/boards/renesas/sdk7780/Makefile
+++ b/arch/sh/boards/mach-sdk7780/Makefile
diff --git a/arch/sh/boards/renesas/sdk7780/irq.c b/arch/sh/boards/mach-sdk7780/irq.c
index 87cdc578f6ff..87cdc578f6ff 100644
--- a/arch/sh/boards/renesas/sdk7780/irq.c
+++ b/arch/sh/boards/mach-sdk7780/irq.c
diff --git a/arch/sh/boards/renesas/sdk7780/setup.c b/arch/sh/boards/mach-sdk7780/setup.c
index acc5932587f1..acc5932587f1 100644
--- a/arch/sh/boards/renesas/sdk7780/setup.c
+++ b/arch/sh/boards/mach-sdk7780/setup.c
diff --git a/arch/sh/boards/se/7206/Makefile b/arch/sh/boards/mach-se/7206/Makefile
index 63e7ed699f39..63e7ed699f39 100644
--- a/arch/sh/boards/se/7206/Makefile
+++ b/arch/sh/boards/mach-se/7206/Makefile
diff --git a/arch/sh/boards/mach-se/7206/io.c b/arch/sh/boards/mach-se/7206/io.c
new file mode 100644
index 000000000000..9c3a33210d61
--- /dev/null
+++ b/arch/sh/boards/mach-se/7206/io.c
@@ -0,0 +1,104 @@
+/* $Id: io.c,v 1.5 2004/02/22 23:08:43 kkojima Exp $
+ *
+ * linux/arch/sh/boards/se/7206/io.c
+ *
+ * Copyright (C) 2006 Yoshinori Sato
+ *
+ * I/O routine for Hitachi 7206 SolutionEngine.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <asm/io.h>
+#include <mach-se/mach/se7206.h>
+
+
+static inline void delay(void)
+{
+        ctrl_inw(0x20000000);  /* P2 ROM Area */
+}
+
+/* MS7750 requires special versions of in*, out* routines, since
+   PC-like io ports are located at upper half byte of 16-bit word which
+   can be accessed only with 16-bit wide.  */
+
+static inline volatile __u16 *
+port2adr(unsigned int port)
+{
+        if (port >= 0x2000 && port < 0x2020)
+                return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
+        else if (port >= 0x300 && port < 0x310)
+                return (volatile __u16 *) (PA_SMSC + (port - 0x300));
+
+        return (volatile __u16 *)port;
+}
+
+unsigned char se7206_inb(unsigned long port)
+{
+        return (*port2adr(port)) & 0xff;
+}
+
+unsigned char se7206_inb_p(unsigned long port)
+{
+        unsigned long v;
+
+        v = (*port2adr(port)) & 0xff;
+        delay();
+        return v;
+}
+
+unsigned short se7206_inw(unsigned long port)
+{
+        return *port2adr(port);;
+}
+
+void se7206_outb(unsigned char value, unsigned long port)
+{
+        *(port2adr(port)) = value;
+}
+
+void se7206_outb_p(unsigned char value, unsigned long port)
+{
+        *(port2adr(port)) = value;
+        delay();
+}
+
+void se7206_outw(unsigned short value, unsigned long port)
+{
+        *port2adr(port) = value;
+}
+
+void se7206_insb(unsigned long port, void *addr, unsigned long count)
+{
+        volatile __u16 *p = port2adr(port);
+        __u8 *ap = addr;
+
+        while (count--)
+                *ap++ = *p;
+}
+
+void se7206_insw(unsigned long port, void *addr, unsigned long count)
+{
+        volatile __u16 *p = port2adr(port);
+        __u16 *ap = addr;
+        while (count--)
+                *ap++ = *p;
+}
+
+void se7206_outsb(unsigned long port, const void *addr, unsigned long count)
+{
+        volatile __u16 *p = port2adr(port);
+        const __u8 *ap = addr;
+
+        while (count--)
+                *p = *ap++;
+}
+
+void se7206_outsw(unsigned long port, const void *addr, unsigned long count)
+{
+        volatile __u16 *p = port2adr(port);
+        const __u16 *ap = addr;
+        while (count--)
+                *p = *ap++;
+}
diff --git a/arch/sh/boards/mach-se/7206/irq.c b/arch/sh/boards/mach-se/7206/irq.c
new file mode 100644
index 000000000000..aef7f052851a
--- /dev/null
+++ b/arch/sh/boards/mach-se/7206/irq.c
@@ -0,0 +1,146 @@
+/*
+ * linux/arch/sh/boards/se/7206/irq.c
+ *
+ * Copyright (C) 2005,2006 Yoshinori Sato
+ *
+ * Hitachi SolutionEngine Support.
+ *
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <mach-se/mach/se7206.h>
+
+#define INTSTS0 0x31800000
+#define INTSTS1 0x31800002
+#define INTMSK0 0x31800004
+#define INTMSK1 0x31800006
+#define INTSEL  0x31800008
+
+#define IRQ0_IRQ 64
+#define IRQ1_IRQ 65
+#define IRQ3_IRQ 67
+
+#define INTC_IPR01 0xfffe0818
+#define INTC_ICR1  0xfffe0802
+
+static void disable_se7206_irq(unsigned int irq)
+{
+        unsigned short val;
+        unsigned short mask = 0xffff ^ (0x0f << 4 * (3 - (IRQ0_IRQ - irq)));
+        unsigned short msk0,msk1;
+
+        /* Set the priority in IPR to 0 */
+        val = ctrl_inw(INTC_IPR01);
+        val &= mask;
+        ctrl_outw(val, INTC_IPR01);
+        /* FPGA mask set */
+        msk0 = ctrl_inw(INTMSK0);
+        msk1 = ctrl_inw(INTMSK1);
+
+        switch (irq) {
+        case IRQ0_IRQ:
+                msk0 |= 0x0010;
+                break;
+        case IRQ1_IRQ:
+                msk0 |= 0x000f;
+                break;
+        case IRQ3_IRQ:
+                msk0 |= 0x0f00;
+                msk1 |= 0x00ff;
+                break;
+        }
+        ctrl_outw(msk0, INTMSK0);
+        ctrl_outw(msk1, INTMSK1);
+}
+
+static void enable_se7206_irq(unsigned int irq)
+{
+        unsigned short val;
+        unsigned short value = (0x0001 << 4 * (3 - (IRQ0_IRQ - irq)));
+        unsigned short msk0,msk1;
+
+        /* Set priority in IPR back to original value */
+        val = ctrl_inw(INTC_IPR01);
+        val |= value;
+        ctrl_outw(val, INTC_IPR01);
+
+        /* FPGA mask reset */
+        msk0 = ctrl_inw(INTMSK0);
+        msk1 = ctrl_inw(INTMSK1);
+
+        switch (irq) {
+        case IRQ0_IRQ:
+                msk0 &= ~0x0010;
+                break;
+        case IRQ1_IRQ:
+                msk0 &= ~0x000f;
+                break;
+        case IRQ3_IRQ:
+                msk0 &= ~0x0f00;
+                msk1 &= ~0x00ff;
+                break;
+        }
+        ctrl_outw(msk0, INTMSK0);
+        ctrl_outw(msk1, INTMSK1);
+}
+
+static void eoi_se7206_irq(unsigned int irq)
+{
+        unsigned short sts0,sts1;
+
+        if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
+                enable_se7206_irq(irq);
+        /* FPGA isr clear */
+        sts0 = ctrl_inw(INTSTS0);
+        sts1 = ctrl_inw(INTSTS1);
+
+        switch (irq) {
+        case IRQ0_IRQ:
+                sts0 &= ~0x0010;
+                break;
+        case IRQ1_IRQ:
+                sts0 &= ~0x000f;
+                break;
+        case IRQ3_IRQ:
+                sts0 &= ~0x0f00;
+                sts1 &= ~0x00ff;
+                break;
+        }
+        ctrl_outw(sts0, INTSTS0);
+        ctrl_outw(sts1, INTSTS1);
+}
+
+static struct irq_chip se7206_irq_chip __read_mostly = {
+        .name           = "SE7206-FPGA",
+        .mask           = disable_se7206_irq,
+        .unmask         = enable_se7206_irq,
+        .mask_ack       = disable_se7206_irq,
+        .eoi            = eoi_se7206_irq,
+};
+
+static void make_se7206_irq(unsigned int irq)
+{
+        disable_irq_nosync(irq);
+        set_irq_chip_and_handler_name(irq, &se7206_irq_chip,
+                                      handle_level_irq, "level");
+        disable_se7206_irq(irq);
+}
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_se7206_IRQ(void)
+{
+        make_se7206_irq(IRQ0_IRQ); /* SMC91C111 */
+        make_se7206_irq(IRQ1_IRQ); /* ATA */
+        make_se7206_irq(IRQ3_IRQ); /* SLOT / PCM */
+        ctrl_outw(inw(INTC_ICR1) | 0x000b ,INTC_ICR1 ) ; /* ICR1 */
+
+        /* FPGA System register setup*/
+        ctrl_outw(0x0000,INTSTS0); /* Clear INTSTS0 */
+        ctrl_outw(0x0000,INTSTS1); /* Clear INTSTS1 */
+        /* IRQ0=LAN, IRQ1=ATA, IRQ3=SLT,PCM */
+        ctrl_outw(0x0001,INTSEL);
+}
diff --git a/arch/sh/boards/mach-se/7206/setup.c b/arch/sh/boards/mach-se/7206/setup.c
new file mode 100644
index 000000000000..f5466384972e
--- /dev/null
+++ b/arch/sh/boards/mach-se/7206/setup.c
@@ -0,0 +1,108 @@
+/*
+ *
+ * linux/arch/sh/boards/se/7206/setup.c
+ *
+ * Copyright (C) 2006  Yoshinori Sato
+ * Copyright (C) 2007 - 2008  Paul Mundt
+ *
+ * Hitachi 7206 SolutionEngine Support.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/smc91x.h>
+#include <mach-se/mach/se7206.h>
+#include <asm/io.h>
+#include <asm/machvec.h>
+#include <asm/heartbeat.h>
+
+static struct resource smc91x_resources[] = {
+        [0] = {
+                .name           = "smc91x-regs",
+                .start          = PA_SMSC + 0x300,
+                .end            = PA_SMSC + 0x300 + 0x020 - 1,
+                .flags          = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start          = 64,
+                .end            = 64,
+                .flags          = IORESOURCE_IRQ,
+        },
+};
+
+static struct smc91x_platdata smc91x_info = {
+        .flags  = SMC91X_USE_16BIT,
+};
+
+static struct platform_device smc91x_device = {
+        .name           = "smc91x",
+        .id             = -1,
+        .dev            = {
+                .dma_mask               = NULL,
+                .coherent_dma_mask      = 0xffffffff,
+                .platform_data          = &smc91x_info,
+        },
+        .num_resources  = ARRAY_SIZE(smc91x_resources),
+        .resource       = smc91x_resources,
+};
+
+static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
+
+static struct heartbeat_data heartbeat_data = {
+        .bit_pos        = heartbeat_bit_pos,
+        .nr_bits        = ARRAY_SIZE(heartbeat_bit_pos),
+        .regsize        = 32,
+};
+
+static struct resource heartbeat_resources[] = {
+        [0] = {
+                .start  = PA_LED,
+                .end    = PA_LED,
+                .flags  = IORESOURCE_MEM,
+        },
+};
+
+static struct platform_device heartbeat_device = {
+        .name           = "heartbeat",
+        .id             = -1,
+        .dev    = {
+                .platform_data  = &heartbeat_data,
+        },
+        .num_resources  = ARRAY_SIZE(heartbeat_resources),
+        .resource       = heartbeat_resources,
+};
+
+static struct platform_device *se7206_devices[] __initdata = {
+        &smc91x_device,
+        &heartbeat_device,
+};
+
+static int __init se7206_devices_setup(void)
+{
+        return platform_add_devices(se7206_devices, ARRAY_SIZE(se7206_devices));
+}
+__initcall(se7206_devices_setup);
+
+/*
+ * The Machine Vector
+ */
+
+static struct sh_machine_vector mv_se __initmv = {
+        .mv_name                = "SolutionEngine",
+        .mv_nr_irqs             = 256,
+        .mv_inb                 = se7206_inb,
+        .mv_inw                 = se7206_inw,
+        .mv_outb                = se7206_outb,
+        .mv_outw                = se7206_outw,
+
+        .mv_inb_p               = se7206_inb_p,
+        .mv_inw_p               = se7206_inw,
+        .mv_outb_p              = se7206_outb_p,
+        .mv_outw_p              = se7206_outw,
+
+        .mv_insb                = se7206_insb,
+        .mv_insw                = se7206_insw,
+        .mv_outsb               = se7206_outsb,
+        .mv_outsw               = se7206_outsw,
+
+        .mv_init_irq            = init_se7206_IRQ,
+};
diff --git a/arch/sh/boards/se/7343/Makefile b/arch/sh/boards/mach-se/7343/Makefile
index 3024796c6203..3024796c6203 100644
--- a/arch/sh/boards/se/7343/Makefile
+++ b/arch/sh/boards/mach-se/7343/Makefile
diff --git a/arch/sh/boards/mach-se/7343/io.c b/arch/sh/boards/mach-se/7343/io.c
new file mode 100644
index 000000000000..8741abc1da7b
--- /dev/null
+++ b/arch/sh/boards/mach-se/7343/io.c
@@ -0,0 +1,273 @@
+/*
+ * arch/sh/boards/se/7343/io.c
+ *
+ * I/O routine for SH-Mobile3AS 7343 SolutionEngine.
+ *
+ */
+#include <linux/kernel.h>
+#include <asm/io.h>
+#include <mach-se/mach/se7343.h>
+
+#define badio(fn, a) panic("bad i/o operation %s for %08lx.", #fn, a)
+
+struct iop {
+        unsigned long start, end;
+        unsigned long base;
+        struct iop *(*check) (struct iop * p, unsigned long port);
+        unsigned char (*inb) (struct iop * p, unsigned long port);
+        unsigned short (*inw) (struct iop * p, unsigned long port);
+        void (*outb) (struct iop * p, unsigned char value, unsigned long port);
+        void (*outw) (struct iop * p, unsigned short value, unsigned long port);
+};
+
+struct iop *
+simple_check(struct iop *p, unsigned long port)
+{
+        static int count;
+
+        if (count < 100)
+                count++;
+
+        port &= 0xFFFF;
+
+        if ((p->start <= port) && (port <= p->end))
+                return p;
+        else
+                badio(check, port);
+}
+
+struct iop *
+ide_check(struct iop *p, unsigned long port)
+{
+        if (((0x1f0 <= port) && (port <= 0x1f7)) || (port == 0x3f7))
+                return p;
+        return NULL;
+}
+
+unsigned char
+simple_inb(struct iop *p, unsigned long port)
+{
+        return *(unsigned char *) (p->base + port);
+}
+
+unsigned short
+simple_inw(struct iop *p, unsigned long port)
+{
+        return *(unsigned short *) (p->base + port);
+}
+
+void
+simple_outb(struct iop *p, unsigned char value, unsigned long port)
+{
+        *(unsigned char *) (p->base + port) = value;
+}
+
+void
+simple_outw(struct iop *p, unsigned short value, unsigned long port)
+{
+        *(unsigned short *) (p->base + port) = value;
+}
+
+unsigned char
+pcc_inb(struct iop *p, unsigned long port)
+{
+        unsigned long addr = p->base + port + 0x40000;
+        unsigned long v;
+
+        if (port & 1)
+                addr += 0x00400000;
+        v = *(volatile unsigned char *) addr;
+        return v;
+}
+
+void
+pcc_outb(struct iop *p, unsigned char value, unsigned long port)
+{
+        unsigned long addr = p->base + port + 0x40000;
+
+        if (port & 1)
+                addr += 0x00400000;
+        *(volatile unsigned char *) addr = value;
+}
+
+unsigned char
+bad_inb(struct iop *p, unsigned long port)
+{
+        badio(inb, port);
+}
+
+void
+bad_outb(struct iop *p, unsigned char value, unsigned long port)
+{
+        badio(inw, port);
+}
+
+#ifdef CONFIG_SMC91X
+/* MSTLANEX01 LAN at 0xb400:0000 */
+static struct iop laniop = {
+        .start = 0x00,
+        .end = 0x0F,
+        .base = 0x04000000,
+        .check = simple_check,
+        .inb = simple_inb,
+        .inw = simple_inw,
+        .outb = simple_outb,
+        .outw = simple_outw,
+};
+#endif
+
+#ifdef CONFIG_NE2000
+/* NE2000 pc card NIC */
+static struct iop neiop = {
+        .start = 0x280,
+        .end = 0x29f,
+        .base = 0xb0600000 + 0x80,      /* soft 0x280 -> hard 0x300 */
+        .check = simple_check,
+        .inb = pcc_inb,
+        .inw = simple_inw,
+        .outb = pcc_outb,
+        .outw = simple_outw,
+};
+#endif
+
+#ifdef CONFIG_IDE
+/* CF in CF slot */
+static struct iop cfiop = {
+        .base = 0xb0600000,
+        .check = ide_check,
+        .inb = pcc_inb,
+        .inw = simple_inw,
+        .outb = pcc_outb,
+        .outw = simple_outw,
+};
+#endif
+
+static __inline__ struct iop *
+port2iop(unsigned long port)
+{
+        if (0) ;
+#if defined(CONFIG_SMC91X)
+        else if (laniop.check(&laniop, port))
+                return &laniop;
+#endif
+#if defined(CONFIG_NE2000)
+        else if (neiop.check(&neiop, port))
+                return &neiop;
+#endif
+#if defined(CONFIG_IDE)
+        else if (cfiop.check(&cfiop, port))
+                return &cfiop;
+#endif
+        else
+                return NULL;
+}
+
+static inline void
+delay(void)
+{
+        ctrl_inw(0xac000000);
+        ctrl_inw(0xac000000);
+}
+
+unsigned char
+sh7343se_inb(unsigned long port)
+{
+        struct iop *p = port2iop(port);
+        return (p->inb) (p, port);
+}
+
+unsigned char
+sh7343se_inb_p(unsigned long port)
+{
+        unsigned char v = sh7343se_inb(port);
+        delay();
+        return v;
+}
+
+unsigned short
+sh7343se_inw(unsigned long port)
+{
+        struct iop *p = port2iop(port);
+        return (p->inw) (p, port);
+}
+
+unsigned int
+sh7343se_inl(unsigned long port)
+{
+        badio(inl, port);
+}
+
+void
+sh7343se_outb(unsigned char value, unsigned long port)
+{
+        struct iop *p = port2iop(port);
+        (p->outb) (p, value, port);
+}
+
+void
+sh7343se_outb_p(unsigned char value, unsigned long port)
+{
+        sh7343se_outb(value, port);
+        delay();
+}
+
+void
+sh7343se_outw(unsigned short value, unsigned long port)
+{
+        struct iop *p = port2iop(port);
+        (p->outw) (p, value, port);
+}
+
+void
+sh7343se_outl(unsigned int value, unsigned long port)
+{
+        badio(outl, port);
+}
+
+void
+sh7343se_insb(unsigned long port, void *addr, unsigned long count)
+{
+        unsigned char *a = addr;
+        struct iop *p = port2iop(port);
+        while (count--)
+                *a++ = (p->inb) (p, port);
+}
+
+void
+sh7343se_insw(unsigned long port, void *addr, unsigned long count)
+{
+        unsigned short *a = addr;
+        struct iop *p = port2iop(port);
+        while (count--)
+                *a++ = (p->inw) (p, port);
+}
+
+void
+sh7343se_insl(unsigned long port, void *addr, unsigned long count)
+{
+        badio(insl, port);
+}
+
+void
+sh7343se_outsb(unsigned long port, const void *addr, unsigned long count)
+{
+        unsigned char *a = (unsigned char *) addr;
+        struct iop *p = port2iop(port);
+        while (count--)
+                (p->outb) (p, *a++, port);
+}
+
+void
+sh7343se_outsw(unsigned long port, const void *addr, unsigned long count)
+{
+        unsigned short *a = (unsigned short *) addr;
+        struct iop *p = port2iop(port);
+        while (count--)
+                (p->outw) (p, *a++, port);
+}
+
+void
+sh7343se_outsl(unsigned long port, const void *addr, unsigned long count)
+{
+        badio(outsw, port);
+}
diff --git a/arch/sh/boards/mach-se/7343/irq.c b/arch/sh/boards/mach-se/7343/irq.c
new file mode 100644
index 000000000000..5d96e2eef82a
--- /dev/null
+++ b/arch/sh/boards/mach-se/7343/irq.c
@@ -0,0 +1,80 @@
+/*
+ * linux/arch/sh/boards/se/7343/irq.c
+ *
+ * Copyright (C) 2008  Yoshihiro Shimoda
+ *
+ * Based on linux/arch/sh/boards/se/7722/irq.c
+ * Copyright (C) 2007  Nobuhiro Iwamatsu
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <mach-se/mach/se7343.h>
+
+static void disable_se7343_irq(unsigned int irq)
+{
+        unsigned int bit = irq - SE7343_FPGA_IRQ_BASE;
+        ctrl_outw(ctrl_inw(PA_CPLD_IMSK) | 1 << bit, PA_CPLD_IMSK);
+}
+
+static void enable_se7343_irq(unsigned int irq)
+{
+        unsigned int bit = irq - SE7343_FPGA_IRQ_BASE;
+        ctrl_outw(ctrl_inw(PA_CPLD_IMSK) & ~(1 << bit), PA_CPLD_IMSK);
+}
+
+static struct irq_chip se7343_irq_chip __read_mostly = {
+        .name           = "SE7343-FPGA",
+        .mask           = disable_se7343_irq,
+        .unmask         = enable_se7343_irq,
+        .mask_ack       = disable_se7343_irq,
+};
+
+static void se7343_irq_demux(unsigned int irq, struct irq_desc *desc)
+{
+        unsigned short intv = ctrl_inw(PA_CPLD_ST);
+        struct irq_desc *ext_desc;
+        unsigned int ext_irq = SE7343_FPGA_IRQ_BASE;
+
+        intv &= (1 << SE7343_FPGA_IRQ_NR) - 1;
+
+        while (intv) {
+                if (intv & 1) {
+                        ext_desc = irq_desc + ext_irq;
+                        handle_level_irq(ext_irq, ext_desc);
+                }
+                intv >>= 1;
+                ext_irq++;
+        }
+}
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_7343se_IRQ(void)
+{
+        int i;
+
+        ctrl_outw(0, PA_CPLD_IMSK);     /* disable all irqs */
+        ctrl_outw(0x2000, 0xb03fffec);  /* mrshpc irq enable */
+
+        for (i = 0; i < SE7343_FPGA_IRQ_NR; i++)
+                set_irq_chip_and_handler_name(SE7343_FPGA_IRQ_BASE + i,
+                                              &se7343_irq_chip,
+                                              handle_level_irq, "level");
+
+        set_irq_chained_handler(IRQ0_IRQ, se7343_irq_demux);
+        set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW);
+        set_irq_chained_handler(IRQ1_IRQ, se7343_irq_demux);
+        set_irq_type(IRQ1_IRQ, IRQ_TYPE_LEVEL_LOW);
+        set_irq_chained_handler(IRQ4_IRQ, se7343_irq_demux);
+        set_irq_type(IRQ4_IRQ, IRQ_TYPE_LEVEL_LOW);
+        set_irq_chained_handler(IRQ5_IRQ, se7343_irq_demux);
+        set_irq_type(IRQ5_IRQ, IRQ_TYPE_LEVEL_LOW);
+}
diff --git a/arch/sh/boards/mach-se/7343/setup.c b/arch/sh/boards/mach-se/7343/setup.c
new file mode 100644
index 000000000000..486f40bf9274
--- /dev/null
+++ b/arch/sh/boards/mach-se/7343/setup.c
@@ -0,0 +1,152 @@
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <asm/machvec.h>
+#include <mach-se/mach/se7343.h>
+#include <asm/heartbeat.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+
+static struct resource smc91x_resources[] = {
+        [0] = {
+                .start  = 0x10000000,
+                .end    = 0x1000000F,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                /*
+                 * shared with other devices via externel
+                 * interrupt controller in FPGA...
+                 */
+                .start  = SMC_IRQ,
+                .end    = SMC_IRQ,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device smc91x_device = {
+        .name           = "smc91x",
+        .id             = 0,
+        .num_resources  = ARRAY_SIZE(smc91x_resources),
+        .resource       = smc91x_resources,
+};
+
+static struct resource heartbeat_resources[] = {
+        [0] = {
+                .start  = PA_LED,
+                .end    = PA_LED,
+                .flags  = IORESOURCE_MEM,
+        },
+};
+
+static struct heartbeat_data heartbeat_data = {
+        .regsize = 16,
+};
+
+static struct platform_device heartbeat_device = {
+        .name           = "heartbeat",
+        .id             = -1,
+        .dev = {
+                .platform_data = &heartbeat_data,
+        },
+        .num_resources  = ARRAY_SIZE(heartbeat_resources),
+        .resource       = heartbeat_resources,
+};
+
+static struct mtd_partition nor_flash_partitions[] = {
+        {
+                .name           = "loader",
+                .offset         = 0x00000000,
+                .size           = 128 * 1024,
+        },
+        {
+                .name           = "rootfs",
+                .offset         = MTDPART_OFS_APPEND,
+                .size           = 31 * 1024 * 1024,
+        },
+        {
+                .name           = "data",
+                .offset         = MTDPART_OFS_APPEND,
+                .size           = MTDPART_SIZ_FULL,
+        },
+};
+
+static struct physmap_flash_data nor_flash_data = {
+        .width          = 2,
+        .parts          = nor_flash_partitions,
+        .nr_parts       = ARRAY_SIZE(nor_flash_partitions),
+};
+
+static struct resource nor_flash_resources[] = {
+        [0]     = {
+                .start  = 0x00000000,
+                .end    = 0x01ffffff,
+                .flags  = IORESOURCE_MEM,
+        }
+};
+
+static struct platform_device nor_flash_device = {
+        .name           = "physmap-flash",
+        .dev            = {
+                .platform_data  = &nor_flash_data,
+        },
+        .num_resources  = ARRAY_SIZE(nor_flash_resources),
+        .resource       = nor_flash_resources,
+};
+
+static struct platform_device *sh7343se_platform_devices[] __initdata = {
+        &smc91x_device,
+        &heartbeat_device,
+        &nor_flash_device,
+};
+
+static int __init sh7343se_devices_setup(void)
+{
+        return platform_add_devices(sh7343se_platform_devices,
+                                    ARRAY_SIZE(sh7343se_platform_devices));
+}
+device_initcall(sh7343se_devices_setup);
+
+/*
+ * Initialize the board
+ */
+static void __init sh7343se_setup(char **cmdline_p)
+{
+        ctrl_outw(0xf900, FPGA_OUT);    /* FPGA */
+
+        ctrl_outw(0x0002, PORT_PECR);   /* PORT E 1 = IRQ5 */
+        ctrl_outw(0x0020, PORT_PSELD);
+
+        printk(KERN_INFO "MS7343CP01 Setup...done\n");
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_7343se __initmv = {
+        .mv_name = "SolutionEngine 7343",
+        .mv_setup = sh7343se_setup,
+        .mv_nr_irqs = 108,
+        .mv_inb = sh7343se_inb,
+        .mv_inw = sh7343se_inw,
+        .mv_inl = sh7343se_inl,
+        .mv_outb = sh7343se_outb,
+        .mv_outw = sh7343se_outw,
+        .mv_outl = sh7343se_outl,
+
+        .mv_inb_p = sh7343se_inb_p,
+        .mv_inw_p = sh7343se_inw,
+        .mv_inl_p = sh7343se_inl,
+        .mv_outb_p = sh7343se_outb_p,
+        .mv_outw_p = sh7343se_outw,
+        .mv_outl_p = sh7343se_outl,
+
+        .mv_insb = sh7343se_insb,
+        .mv_insw = sh7343se_insw,
+        .mv_insl = sh7343se_insl,
+        .mv_outsb = sh7343se_outsb,
+        .mv_outsw = sh7343se_outsw,
+        .mv_outsl = sh7343se_outsl,
+
+        .mv_init_irq = init_7343se_IRQ,
+};
diff --git a/arch/sh/boards/se/770x/Makefile b/arch/sh/boards/mach-se/770x/Makefile
index 8e624b06d5ea..8e624b06d5ea 100644
--- a/arch/sh/boards/se/770x/Makefile
+++ b/arch/sh/boards/mach-se/770x/Makefile
diff --git a/arch/sh/boards/mach-se/770x/io.c b/arch/sh/boards/mach-se/770x/io.c
new file mode 100644
index 000000000000..28833c8786ea
--- /dev/null
+++ b/arch/sh/boards/mach-se/770x/io.c
@@ -0,0 +1,156 @@
+/*
+ * Copyright (C) 2000  Kazumoto Kojima
+ *
+ * I/O routine for Hitachi SolutionEngine.
+ */
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <asm/io.h>
+#include <mach-se/mach/se.h>
+
+/* MS7750 requires special versions of in*, out* routines, since
+   PC-like io ports are located at upper half byte of 16-bit word which
+   can be accessed only with 16-bit wide.  */
+
+static inline volatile __u16 *
+port2adr(unsigned int port)
+{
+        if (port & 0xff000000)
+                return ( volatile __u16 *) port;
+        if (port >= 0x2000)
+                return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
+        else if (port >= 0x1000)
+                return (volatile __u16 *) (PA_83902 + (port << 1));
+        else
+                return (volatile __u16 *) (PA_SUPERIO + (port << 1));
+}
+
+static inline int
+shifted_port(unsigned long port)
+{
+        /* For IDE registers, value is not shifted */
+        if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6)
+                return 0;
+        else
+                return 1;
+}
+
+unsigned char se_inb(unsigned long port)
+{
+        if (shifted_port(port))
+                return (*port2adr(port) >> 8);
+        else
+                return (*port2adr(port))&0xff;
+}
+
+unsigned char se_inb_p(unsigned long port)
+{
+        unsigned long v;
+
+        if (shifted_port(port))
+                v = (*port2adr(port) >> 8);
+        else
+                v = (*port2adr(port))&0xff;
+        ctrl_delay();
+        return v;
+}
+
+unsigned short se_inw(unsigned long port)
+{
+        if (port >= 0x2000)
+                return *port2adr(port);
+        else
+                maybebadio(port);
+        return 0;
+}
+
+unsigned int se_inl(unsigned long port)
+{
+        maybebadio(port);
+        return 0;
+}
+
+void se_outb(unsigned char value, unsigned long port)
+{
+        if (shifted_port(port))
+                *(port2adr(port)) = value << 8;
+        else
+                *(port2adr(port)) = value;
+}
+
+void se_outb_p(unsigned char value, unsigned long port)
+{
+        if (shifted_port(port))
+                *(port2adr(port)) = value << 8;
+        else
+                *(port2adr(port)) = value;
+        ctrl_delay();
+}
+
+void se_outw(unsigned short value, unsigned long port)
+{
+        if (port >= 0x2000)
+                *port2adr(port) = value;
+        else
+                maybebadio(port);
+}
+
+void se_outl(unsigned int value, unsigned long port)
+{
+        maybebadio(port);
+}
+
+void se_insb(unsigned long port, void *addr, unsigned long count)
+{
+        volatile __u16 *p = port2adr(port);
+        __u8 *ap = addr;
+
+        if (shifted_port(port)) {
+                while (count--)
+                        *ap++ = *p >> 8;
+        } else {
+                while (count--)
+                        *ap++ = *p;
+        }
+}
+
+void se_insw(unsigned long port, void *addr, unsigned long count)
+{
+        volatile __u16 *p = port2adr(port);
+        __u16 *ap = addr;
+        while (count--)
+                *ap++ = *p;
+}
+
+void se_insl(unsigned long port, void *addr, unsigned long count)
+{
+        maybebadio(port);
+}
+
+void se_outsb(unsigned long port, const void *addr, unsigned long count)
+{
+        volatile __u16 *p = port2adr(port);
+        const __u8 *ap = addr;
+
+        if (shifted_port(port)) {
+                while (count--)
+                        *p = *ap++ << 8;
+        } else {
+                while (count--)
+                        *p = *ap++;
+        }
+}
+
+void se_outsw(unsigned long port, const void *addr, unsigned long count)
+{
+        volatile __u16 *p = port2adr(port);
+        const __u16 *ap = addr;
+
+        while (count--)
+                *p = *ap++;
+}
+
+void se_outsl(unsigned long port, const void *addr, unsigned long count)
+{
+        maybebadio(port);
+}
diff --git a/arch/sh/boards/mach-se/770x/irq.c b/arch/sh/boards/mach-se/770x/irq.c
new file mode 100644
index 000000000000..ec1fea571b52
--- /dev/null
+++ b/arch/sh/boards/mach-se/770x/irq.c
@@ -0,0 +1,108 @@
+/*
+ * linux/arch/sh/boards/se/770x/irq.c
+ *
+ * Copyright (C) 2000  Kazumoto Kojima
+ * Copyright (C) 2006  Nobuhiro Iwamatsu
+ *
+ * Hitachi SolutionEngine Support.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <mach-se/mach/se.h>
+
+static struct ipr_data ipr_irq_table[] = {
+        /*
+        * Super I/O (Just mimic PC):
+        *  1: keyboard
+        *  3: serial 0
+        *  4: serial 1
+        *  5: printer
+        *  6: floppy
+        *  8: rtc
+        * 12: mouse
+        * 14: ide0
+        */
+#if defined(CONFIG_CPU_SUBTYPE_SH7705)
+        /* This is default value */
+        { 13, 0, 8,  0x0f-13, },
+        { 5 , 0, 4,  0x0f- 5, },
+        { 10, 1, 0,  0x0f-10, },
+        { 7 , 2, 4,  0x0f- 7, },
+        { 3 , 2, 0,  0x0f- 3, },
+        { 1 , 3, 12, 0x0f- 1, },
+        { 12, 3, 4,  0x0f-12, }, /* LAN */
+        { 2 , 4, 8,  0x0f- 2, }, /* PCIRQ2 */
+        { 6 , 4, 4,  0x0f- 6, }, /* PCIRQ1 */
+        { 14, 4, 0,  0x0f-14, }, /* PCIRQ0 */
+        { 0 , 5, 12, 0x0f   , }, 
+        { 4 , 5, 4,  0x0f- 4, },
+        { 8 , 6, 12, 0x0f- 8, },
+        { 9 , 6, 8,  0x0f- 9, },
+        { 11, 6, 4,  0x0f-11, },
+#else
+        { 14, 0,  8, 0x0f-14, },
+        { 12, 0,  4, 0x0f-12, },
+        {  8, 1,  4, 0x0f- 8, },
+        {  6, 2, 12, 0x0f- 6, },
+        {  5, 2,  8, 0x0f- 5, },
+        {  4, 2,  4, 0x0f- 4, },
+        {  3, 2,  0, 0x0f- 3, },
+        {  1, 3, 12, 0x0f- 1, },
+#if defined(CONFIG_STNIC)
+        /* ST NIC */
+        { 10, 3,  4, 0x0f-10, },        /* LAN */
+#endif
+        /* MRSHPC IRQs setting */
+        {  0, 4, 12, 0x0f- 0, },        /* PCIRQ3 */
+        { 11, 4,  8, 0x0f-11, },        /* PCIRQ2 */
+        {  9, 4,  4, 0x0f- 9, },        /* PCIRQ1 */
+        {  7, 4,  0, 0x0f- 7, },        /* PCIRQ0 */
+        /* #2, #13 are allocated for SLOT IRQ #1 and #2 (for now) */
+        /* NOTE: #2 and #13 are not used on PC */
+        { 13, 6,  4, 0x0f-13, },        /* SLOTIRQ2 */
+        {  2, 6,  0, 0x0f- 2, },        /* SLOTIRQ1 */
+#endif
+};
+
+static unsigned long ipr_offsets[] = {
+        BCR_ILCRA,
+        BCR_ILCRB,
+        BCR_ILCRC,
+        BCR_ILCRD,
+        BCR_ILCRE,
+        BCR_ILCRF,
+        BCR_ILCRG,
+};
+
+static struct ipr_desc ipr_irq_desc = {
+        .ipr_offsets    = ipr_offsets,
+        .nr_offsets     = ARRAY_SIZE(ipr_offsets),
+
+        .ipr_data       = ipr_irq_table,
+        .nr_irqs        = ARRAY_SIZE(ipr_irq_table),
+        .chip = {
+                .name   = "IPR-se770x",
+        },
+};
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_se_IRQ(void)
+{
+        /* Disable all interrupts */
+        ctrl_outw(0, BCR_ILCRA);
+        ctrl_outw(0, BCR_ILCRB);
+        ctrl_outw(0, BCR_ILCRC);
+        ctrl_outw(0, BCR_ILCRD);
+        ctrl_outw(0, BCR_ILCRE);
+        ctrl_outw(0, BCR_ILCRF);
+        ctrl_outw(0, BCR_ILCRG);
+
+        register_ipr_controller(&ipr_irq_desc);
+}
diff --git a/arch/sh/boards/mach-se/770x/setup.c b/arch/sh/boards/mach-se/770x/setup.c
new file mode 100644
index 000000000000..9123d9687bf7
--- /dev/null
+++ b/arch/sh/boards/mach-se/770x/setup.c
@@ -0,0 +1,222 @@
+/*
+ * linux/arch/sh/boards/se/770x/setup.c
+ *
+ * Copyright (C) 2000  Kazumoto Kojima
+ *
+ * Hitachi SolutionEngine Support.
+ *
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <asm/machvec.h>
+#include <mach-se/mach/se.h>
+#include <asm/io.h>
+#include <asm/smc37c93x.h>
+#include <asm/heartbeat.h>
+
+/*
+ * Configure the Super I/O chip
+ */
+static void __init smsc_config(int index, int data)
+{
+        outb_p(index, INDEX_PORT);
+        outb_p(data, DATA_PORT);
+}
+
+/* XXX: Another candidate for a more generic cchip machine vector */
+static void __init smsc_setup(char **cmdline_p)
+{
+        outb_p(CONFIG_ENTER, CONFIG_PORT);
+        outb_p(CONFIG_ENTER, CONFIG_PORT);
+
+        /* FDC */
+        smsc_config(CURRENT_LDN_INDEX, LDN_FDC);
+        smsc_config(ACTIVATE_INDEX, 0x01);
+        smsc_config(IRQ_SELECT_INDEX, 6); /* IRQ6 */
+
+        /* AUXIO (GPIO): to use IDE1 */
+        smsc_config(CURRENT_LDN_INDEX, LDN_AUXIO);
+        smsc_config(GPIO46_INDEX, 0x00); /* nIOROP */
+        smsc_config(GPIO47_INDEX, 0x00); /* nIOWOP */
+
+        /* COM1 */
+        smsc_config(CURRENT_LDN_INDEX, LDN_COM1);
+        smsc_config(ACTIVATE_INDEX, 0x01);
+        smsc_config(IO_BASE_HI_INDEX, 0x03);
+        smsc_config(IO_BASE_LO_INDEX, 0xf8);
+        smsc_config(IRQ_SELECT_INDEX, 4); /* IRQ4 */
+
+        /* COM2 */
+        smsc_config(CURRENT_LDN_INDEX, LDN_COM2);
+        smsc_config(ACTIVATE_INDEX, 0x01);
+        smsc_config(IO_BASE_HI_INDEX, 0x02);
+        smsc_config(IO_BASE_LO_INDEX, 0xf8);
+        smsc_config(IRQ_SELECT_INDEX, 3); /* IRQ3 */
+
+        /* RTC */
+        smsc_config(CURRENT_LDN_INDEX, LDN_RTC);
+        smsc_config(ACTIVATE_INDEX, 0x01);
+        smsc_config(IRQ_SELECT_INDEX, 8); /* IRQ8 */
+
+        /* XXX: PARPORT, KBD, and MOUSE will come here... */
+        outb_p(CONFIG_EXIT, CONFIG_PORT);
+}
+
+
+static struct resource cf_ide_resources[] = {
+        [0] = {
+                .start  = PA_MRSHPC_IO + 0x1f0,
+                .end    = PA_MRSHPC_IO + 0x1f0 + 8,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = PA_MRSHPC_IO + 0x1f0 + 0x206,
+                .end    = PA_MRSHPC_IO + 0x1f0 + 8 + 0x206 + 8,
+                .flags  = IORESOURCE_MEM,
+        },
+        [2] = {
+                .start  = IRQ_CFCARD,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device cf_ide_device  = {
+        .name           = "pata_platform",
+        .id             = -1,
+        .num_resources  = ARRAY_SIZE(cf_ide_resources),
+        .resource       = cf_ide_resources,
+};
+
+static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
+
+static struct heartbeat_data heartbeat_data = {
+        .bit_pos        = heartbeat_bit_pos,
+        .nr_bits        = ARRAY_SIZE(heartbeat_bit_pos),
+        .regsize        = 16,
+};
+
+static struct resource heartbeat_resources[] = {
+        [0] = {
+                .start  = PA_LED,
+                .end    = PA_LED,
+                .flags  = IORESOURCE_MEM,
+        },
+};
+
+static struct platform_device heartbeat_device = {
+        .name           = "heartbeat",
+        .id             = -1,
+        .dev    = {
+                .platform_data  = &heartbeat_data,
+        },
+        .num_resources  = ARRAY_SIZE(heartbeat_resources),
+        .resource       = heartbeat_resources,
+};
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7710) ||\
+        defined(CONFIG_CPU_SUBTYPE_SH7712)
+/* SH771X Ethernet driver */
+static struct resource sh_eth0_resources[] = {
+        [0] = {
+                .start = SH_ETH0_BASE,
+                .end = SH_ETH0_BASE + 0x1B8,
+                .flags = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start = SH_ETH0_IRQ,
+                .end = SH_ETH0_IRQ,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device sh_eth0_device = {
+        .name = "sh-eth",
+        .id     = 0,
+        .dev = {
+                .platform_data = PHY_ID,
+        },
+        .num_resources = ARRAY_SIZE(sh_eth0_resources),
+        .resource = sh_eth0_resources,
+};
+
+static struct resource sh_eth1_resources[] = {
+        [0] = {
+                .start = SH_ETH1_BASE,
+                .end = SH_ETH1_BASE + 0x1B8,
+                .flags = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start = SH_ETH1_IRQ,
+                .end = SH_ETH1_IRQ,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device sh_eth1_device = {
+        .name = "sh-eth",
+        .id     = 1,
+        .dev = {
+                .platform_data = PHY_ID,
+        },
+        .num_resources = ARRAY_SIZE(sh_eth1_resources),
+        .resource = sh_eth1_resources,
+};
+#endif
+
+static struct platform_device *se_devices[] __initdata = {
+        &heartbeat_device,
+        &cf_ide_device,
+#if defined(CONFIG_CPU_SUBTYPE_SH7710) ||\
+        defined(CONFIG_CPU_SUBTYPE_SH7712)
+        &sh_eth0_device,
+        &sh_eth1_device,
+#endif
+};
+
+static int __init se_devices_setup(void)
+{
+        return platform_add_devices(se_devices, ARRAY_SIZE(se_devices));
+}
+device_initcall(se_devices_setup);
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_se __initmv = {
+        .mv_name                = "SolutionEngine",
+        .mv_setup               = smsc_setup,
+#if defined(CONFIG_CPU_SH4)
+        .mv_nr_irqs             = 48,
+#elif defined(CONFIG_CPU_SUBTYPE_SH7708)
+        .mv_nr_irqs             = 32,
+#elif defined(CONFIG_CPU_SUBTYPE_SH7709)
+        .mv_nr_irqs             = 61,
+#elif defined(CONFIG_CPU_SUBTYPE_SH7705)
+        .mv_nr_irqs             = 86,
+#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
+        .mv_nr_irqs             = 104,
+#endif
+
+        .mv_inb                 = se_inb,
+        .mv_inw                 = se_inw,
+        .mv_inl                 = se_inl,
+        .mv_outb                = se_outb,
+        .mv_outw                = se_outw,
+        .mv_outl                = se_outl,
+
+        .mv_inb_p               = se_inb_p,
+        .mv_inw_p               = se_inw,
+        .mv_inl_p               = se_inl,
+        .mv_outb_p              = se_outb_p,
+        .mv_outw_p              = se_outw,
+        .mv_outl_p              = se_outl,
+
+        .mv_insb                = se_insb,
+        .mv_insw                = se_insw,
+        .mv_insl                = se_insl,
+        .mv_outsb               = se_outsb,
+        .mv_outsw               = se_outsw,
+        .mv_outsl               = se_outsl,
+
+        .mv_init_irq            = init_se_IRQ,
+};
diff --git a/arch/sh/boards/se/7721/Makefile b/arch/sh/boards/mach-se/7721/Makefile
index 7f09030980b3..7f09030980b3 100644
--- a/arch/sh/boards/se/7721/Makefile
+++ b/arch/sh/boards/mach-se/7721/Makefile
diff --git a/arch/sh/boards/mach-se/7721/irq.c b/arch/sh/boards/mach-se/7721/irq.c
new file mode 100644
index 000000000000..b417acc4dad0
--- /dev/null
+++ b/arch/sh/boards/mach-se/7721/irq.c
@@ -0,0 +1,45 @@
+/*
+ * linux/arch/sh/boards/se/7721/irq.c
+ *
+ * Copyright (C) 2008  Renesas Solutions Corp.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <mach-se/mach/se7721.h>
+
+enum {
+        UNUSED = 0,
+
+        /* board specific interrupt sources */
+        MRSHPC,
+};
+
+static struct intc_vect vectors[] __initdata = {
+        INTC_IRQ(MRSHPC, MRSHPC_IRQ0),
+};
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+        { FPGA_ILSR6, 0, 8, 4, /* IRLMSK */
+          { 0, MRSHPC } },
+};
+
+static DECLARE_INTC_DESC(intc_desc, "SE7721", vectors,
+                         NULL, NULL, prio_registers, NULL);
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_se7721_IRQ(void)
+{
+        /* PPCR */
+        ctrl_outw(ctrl_inw(0xa4050118) & ~0x00ff, 0xa4050118);
+
+        register_intc_controller(&intc_desc);
+        intc_set_priority(MRSHPC_IRQ0, 0xf - MRSHPC_IRQ0);
+}
diff --git a/arch/sh/boards/mach-se/7721/setup.c b/arch/sh/boards/mach-se/7721/setup.c
new file mode 100644
index 000000000000..d3fc80ff4d83
--- /dev/null
+++ b/arch/sh/boards/mach-se/7721/setup.c
@@ -0,0 +1,99 @@
+/*
+ * linux/arch/sh/boards/se/7721/setup.c
+ *
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ *
+ * Hitachi UL SolutionEngine 7721 Support.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <asm/machvec.h>
+#include <mach-se/mach/se7721.h>
+#include <asm/io.h>
+#include <asm/heartbeat.h>
+
+static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
+
+static struct heartbeat_data heartbeat_data = {
+        .bit_pos        = heartbeat_bit_pos,
+        .nr_bits        = ARRAY_SIZE(heartbeat_bit_pos),
+        .regsize        = 16,
+};
+
+static struct resource heartbeat_resources[] = {
+        [0] = {
+                .start  = PA_LED,
+                .end    = PA_LED,
+                .flags  = IORESOURCE_MEM,
+        },
+};
+
+static struct platform_device heartbeat_device = {
+        .name           = "heartbeat",
+        .id             = -1,
+        .dev    = {
+                .platform_data  = &heartbeat_data,
+        },
+        .num_resources  = ARRAY_SIZE(heartbeat_resources),
+        .resource       = heartbeat_resources,
+};
+
+static struct resource cf_ide_resources[] = {
+        [0] = {
+                .start  = PA_MRSHPC_IO + 0x1f0,
+                .end    = PA_MRSHPC_IO + 0x1f0 + 8 ,
+                .flags  = IORESOURCE_IO,
+        },
+        [1] = {
+                .start  = PA_MRSHPC_IO + 0x1f0 + 0x206,
+                .end    = PA_MRSHPC_IO + 0x1f0 + 8 + 0x206 + 8,
+                .flags  = IORESOURCE_IO,
+        },
+        [2] = {
+                .start  = MRSHPC_IRQ0,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device cf_ide_device = {
+        .name           = "pata_platform",
+        .id             = -1,
+        .num_resources  = ARRAY_SIZE(cf_ide_resources),
+        .resource       = cf_ide_resources,
+};
+
+static struct platform_device *se7721_devices[] __initdata = {
+        &cf_ide_device,
+        &heartbeat_device
+};
+
+static int __init se7721_devices_setup(void)
+{
+        return platform_add_devices(se7721_devices,
+                ARRAY_SIZE(se7721_devices));
+}
+device_initcall(se7721_devices_setup);
+
+static void __init se7721_setup(char **cmdline_p)
+{
+        /* for USB */
+        ctrl_outw(0x0000, 0xA405010C);  /* PGCR */
+        ctrl_outw(0x0000, 0xA405010E);  /* PHCR */
+        ctrl_outw(0x00AA, 0xA4050118);  /* PPCR */
+        ctrl_outw(0x0000, 0xA4050124);  /* PSELA */
+}
+
+/*
+ * The Machine Vector
+ */
+struct sh_machine_vector mv_se7721 __initmv = {
+        .mv_name                = "Solution Engine 7721",
+        .mv_setup               = se7721_setup,
+        .mv_nr_irqs             = 109,
+        .mv_init_irq            = init_se7721_IRQ,
+};
diff --git a/arch/sh/boards/se/7722/Makefile b/arch/sh/boards/mach-se/7722/Makefile
index 8694373389e5..8694373389e5 100644
--- a/arch/sh/boards/se/7722/Makefile
+++ b/arch/sh/boards/mach-se/7722/Makefile
diff --git a/arch/sh/boards/mach-se/7722/irq.c b/arch/sh/boards/mach-se/7722/irq.c
new file mode 100644
index 000000000000..02d21a3e2a8f
--- /dev/null
+++ b/arch/sh/boards/mach-se/7722/irq.c
@@ -0,0 +1,76 @@
+/*
+ * linux/arch/sh/boards/se/7722/irq.c
+ *
+ * Copyright (C) 2007  Nobuhiro Iwamatsu
+ *
+ * Hitachi UL SolutionEngine 7722 Support.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <mach-se/mach/se7722.h>
+
+static void disable_se7722_irq(unsigned int irq)
+{
+        unsigned int bit = irq - SE7722_FPGA_IRQ_BASE;
+        ctrl_outw(ctrl_inw(IRQ01_MASK) | 1 << bit, IRQ01_MASK);
+}
+
+static void enable_se7722_irq(unsigned int irq)
+{
+        unsigned int bit = irq - SE7722_FPGA_IRQ_BASE;
+        ctrl_outw(ctrl_inw(IRQ01_MASK) & ~(1 << bit), IRQ01_MASK);
+}
+
+static struct irq_chip se7722_irq_chip __read_mostly = {
+        .name           = "SE7722-FPGA",
+        .mask           = disable_se7722_irq,
+        .unmask         = enable_se7722_irq,
+        .mask_ack       = disable_se7722_irq,
+};
+
+static void se7722_irq_demux(unsigned int irq, struct irq_desc *desc)
+{
+        unsigned short intv = ctrl_inw(IRQ01_STS);
+        struct irq_desc *ext_desc;
+        unsigned int ext_irq = SE7722_FPGA_IRQ_BASE;
+
+        intv &= (1 << SE7722_FPGA_IRQ_NR) - 1;
+
+        while (intv) {
+                if (intv & 1) {
+                        ext_desc = irq_desc + ext_irq;
+                        handle_level_irq(ext_irq, ext_desc);
+                }
+                intv >>= 1;
+                ext_irq++;
+        }
+}
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_se7722_IRQ(void)
+{
+        int i;
+
+        ctrl_outw(0, IRQ01_MASK);       /* disable all irqs */
+        ctrl_outw(0x2000, 0xb03fffec);  /* mrshpc irq enable */
+
+        for (i = 0; i < SE7722_FPGA_IRQ_NR; i++)
+                set_irq_chip_and_handler_name(SE7722_FPGA_IRQ_BASE + i,
+                                              &se7722_irq_chip,
+                                              handle_level_irq, "level");
+
+        set_irq_chained_handler(IRQ0_IRQ, se7722_irq_demux);
+        set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW);
+
+        set_irq_chained_handler(IRQ1_IRQ, se7722_irq_demux);
+        set_irq_type(IRQ1_IRQ, IRQ_TYPE_LEVEL_LOW);
+}
diff --git a/arch/sh/boards/mach-se/7722/setup.c b/arch/sh/boards/mach-se/7722/setup.c
new file mode 100644
index 000000000000..fe6f96517e12
--- /dev/null
+++ b/arch/sh/boards/mach-se/7722/setup.c
@@ -0,0 +1,194 @@
+/*
+ * linux/arch/sh/boards/se/7722/setup.c
+ *
+ * Copyright (C) 2007 Nobuhiro Iwamatsu
+ *
+ * Hitachi UL SolutionEngine 7722 Support.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/input.h>
+#include <linux/smc91x.h>
+#include <asm/machvec.h>
+#include <asm/clock.h>
+#include <mach-se/mach/se7722.h>
+#include <asm/io.h>
+#include <asm/heartbeat.h>
+#include <asm/sh_keysc.h>
+
+/* Heartbeat */
+static struct heartbeat_data heartbeat_data = {
+        .regsize = 16,
+};
+
+static struct resource heartbeat_resources[] = {
+        [0] = {
+                .start  = PA_LED,
+                .end    = PA_LED,
+                .flags  = IORESOURCE_MEM,
+        },
+};
+
+static struct platform_device heartbeat_device = {
+        .name           = "heartbeat",
+        .id             = -1,
+        .dev = {
+                .platform_data = &heartbeat_data,
+        },
+        .num_resources  = ARRAY_SIZE(heartbeat_resources),
+        .resource       = heartbeat_resources,
+};
+
+/* SMC91x */
+static struct smc91x_platdata smc91x_info = {
+        .flags = SMC91X_USE_16BIT,
+};
+
+static struct resource smc91x_eth_resources[] = {
+        [0] = {
+                .name   = "smc91x-regs" ,
+                .start  = PA_LAN + 0x300,
+                .end    = PA_LAN + 0x300 + 0x10 ,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = SMC_IRQ,
+                .end    = SMC_IRQ,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device smc91x_eth_device = {
+        .name           = "smc91x",
+        .id             = 0,
+        .dev = {
+                .dma_mask               = NULL,         /* don't use dma */
+                .coherent_dma_mask      = 0xffffffff,
+                .platform_data  = &smc91x_info,
+        },
+        .num_resources  = ARRAY_SIZE(smc91x_eth_resources),
+        .resource       = smc91x_eth_resources,
+};
+
+static struct resource cf_ide_resources[] = {
+        [0] = {
+                .start  = PA_MRSHPC_IO + 0x1f0,
+                .end    = PA_MRSHPC_IO + 0x1f0 + 8 ,
+                .flags  = IORESOURCE_IO,
+        },
+        [1] = {
+                .start  = PA_MRSHPC_IO + 0x1f0 + 0x206,
+                .end    = PA_MRSHPC_IO + 0x1f0 +8 + 0x206 + 8,
+                .flags  = IORESOURCE_IO,
+        },
+        [2] = {
+                .start  = MRSHPC_IRQ0,
+                .end    = MRSHPC_IRQ0,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device cf_ide_device  = {
+        .name           = "pata_platform",
+        .id             = -1,
+        .num_resources  = ARRAY_SIZE(cf_ide_resources),
+        .resource       = cf_ide_resources,
+};
+
+static struct sh_keysc_info sh_keysc_info = {
+        .mode = SH_KEYSC_MODE_1, /* KEYOUT0->5, KEYIN0->4 */
+        .scan_timing = 3,
+        .delay = 5,
+        .keycodes = { /* SW1 -> SW30 */
+                KEY_A, KEY_B, KEY_C, KEY_D, KEY_E,
+                KEY_F, KEY_G, KEY_H, KEY_I, KEY_J,
+                KEY_K, KEY_L, KEY_M, KEY_N, KEY_O,
+                KEY_P, KEY_Q, KEY_R, KEY_S, KEY_T,
+                KEY_U, KEY_V, KEY_W, KEY_X, KEY_Y,
+                KEY_Z,
+                KEY_HOME, KEY_SLEEP, KEY_WAKEUP, KEY_COFFEE, /* life */
+        },
+};
+
+static struct resource sh_keysc_resources[] = {
+        [0] = {
+                .start  = 0x044b0000,
+                .end    = 0x044b000f,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = 79,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device sh_keysc_device = {
+        .name           = "sh_keysc",
+        .num_resources  = ARRAY_SIZE(sh_keysc_resources),
+        .resource       = sh_keysc_resources,
+        .dev    = {
+                .platform_data  = &sh_keysc_info,
+        },
+};
+
+static struct platform_device *se7722_devices[] __initdata = {
+        &heartbeat_device,
+        &smc91x_eth_device,
+        &cf_ide_device,
+        &sh_keysc_device,
+};
+
+static int __init se7722_devices_setup(void)
+{
+        clk_always_enable("mstp214"); /* KEYSC */
+
+        return platform_add_devices(se7722_devices,
+                ARRAY_SIZE(se7722_devices));
+}
+device_initcall(se7722_devices_setup);
+
+static void __init se7722_setup(char **cmdline_p)
+{
+        ctrl_outw(0x010D, FPGA_OUT);    /* FPGA */
+
+        ctrl_outw(0x0000, PORT_PECR);   /* PORT E 1 = IRQ5 ,E 0 = BS */
+        ctrl_outw(0x1000, PORT_PJCR);   /* PORT J 1 = IRQ1,J 0 =IRQ0 */
+
+        /* LCDC I/O */
+        ctrl_outw(0x0020, PORT_PSELD);
+
+        /* SIOF1*/
+        ctrl_outw(0x0003, PORT_PSELB);
+        ctrl_outw(0xe000, PORT_PSELC);
+        ctrl_outw(0x0000, PORT_PKCR);
+
+        /* LCDC */
+        ctrl_outw(0x4020, PORT_PHCR);
+        ctrl_outw(0x0000, PORT_PLCR);
+        ctrl_outw(0x0000, PORT_PMCR);
+        ctrl_outw(0x0002, PORT_PRCR);
+        ctrl_outw(0x0000, PORT_PXCR);   /* LCDC,CS6A */
+
+        /* KEYSC */
+        ctrl_outw(0x0A10, PORT_PSELA); /* BS,SHHID2 */
+        ctrl_outw(0x0000, PORT_PYCR);
+        ctrl_outw(0x0000, PORT_PZCR);
+        ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x4000, PORT_HIZCRA);
+        ctrl_outw(ctrl_inw(PORT_HIZCRC) & ~0xc000, PORT_HIZCRC);
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_se7722 __initmv = {
+        .mv_name                = "Solution Engine 7722" ,
+        .mv_setup               = se7722_setup ,
+        .mv_nr_irqs             = SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_NR,
+        .mv_init_irq            = init_se7722_IRQ,
+};
diff --git a/arch/sh/boards/se/7751/Makefile b/arch/sh/boards/mach-se/7751/Makefile
index dbc29f3a9de5..dbc29f3a9de5 100644
--- a/arch/sh/boards/se/7751/Makefile
+++ b/arch/sh/boards/mach-se/7751/Makefile
diff --git a/arch/sh/boards/mach-se/7751/io.c b/arch/sh/boards/mach-se/7751/io.c
new file mode 100644
index 000000000000..6287ae570319
--- /dev/null
+++ b/arch/sh/boards/mach-se/7751/io.c
@@ -0,0 +1,135 @@
+/*
+ * Copyright (C) 2001  Ian da Silva, Jeremy Siegel
+ * Based largely on io_se.c.
+ *
+ * I/O routine for Hitachi 7751 SolutionEngine.
+ *
+ * Initial version only to support LAN access; some
+ * placeholder code from io_se.c left in with the
+ * expectation of later SuperIO and PCMCIA access.
+ */
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <asm/io.h>
+#include <mach-se/mach/se7751.h>
+#include <asm/addrspace.h>
+
+static inline volatile u16 *port2adr(unsigned int port)
+{
+        if (port >= 0x2000)
+                return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
+        maybebadio((unsigned long)port);
+        return (volatile __u16*)port;
+}
+
+/*
+ * General outline: remap really low stuff [eventually] to SuperIO,
+ * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO)
+ * is mapped through the PCI IO window.  Stuff with high bits (PXSEG)
+ * should be way beyond the window, and is used  w/o translation for
+ * compatibility.
+ */
+unsigned char sh7751se_inb(unsigned long port)
+{
+        if (PXSEG(port))
+                return *(volatile unsigned char *)port;
+        else if (is_pci_ioaddr(port))
+                return *(volatile unsigned char *)pci_ioaddr(port);
+        else
+                return (*port2adr(port)) & 0xff;
+}
+
+unsigned char sh7751se_inb_p(unsigned long port)
+{
+        unsigned char v;
+
+        if (PXSEG(port))
+                v = *(volatile unsigned char *)port;
+        else if (is_pci_ioaddr(port))
+                v = *(volatile unsigned char *)pci_ioaddr(port);
+        else
+                v = (*port2adr(port)) & 0xff;
+        ctrl_delay();
+        return v;
+}
+
+unsigned short sh7751se_inw(unsigned long port)
+{
+        if (PXSEG(port))
+                return *(volatile unsigned short *)port;
+        else if (is_pci_ioaddr(port))
+                return *(volatile unsigned short *)pci_ioaddr(port);
+        else if (port >= 0x2000)
+                return *port2adr(port);
+        else
+                maybebadio(port);
+        return 0;
+}
+
+unsigned int sh7751se_inl(unsigned long port)
+{
+        if (PXSEG(port))
+                return *(volatile unsigned long *)port;
+        else if (is_pci_ioaddr(port))
+                return *(volatile unsigned int *)pci_ioaddr(port);
+        else if (port >= 0x2000)
+                return *port2adr(port);
+        else
+                maybebadio(port);
+        return 0;
+}
+
+void sh7751se_outb(unsigned char value, unsigned long port)
+{
+
+        if (PXSEG(port))
+                *(volatile unsigned char *)port = value;
+        else if (is_pci_ioaddr(port))
+                *((unsigned char*)pci_ioaddr(port)) = value;
+        else
+                *(port2adr(port)) = value;
+}
+
+void sh7751se_outb_p(unsigned char value, unsigned long port)
+{
+        if (PXSEG(port))
+                *(volatile unsigned char *)port = value;
+        else if (is_pci_ioaddr(port))
+                *((unsigned char*)pci_ioaddr(port)) = value;
+        else
+                *(port2adr(port)) = value;
+        ctrl_delay();
+}
+
+void sh7751se_outw(unsigned short value, unsigned long port)
+{
+        if (PXSEG(port))
+                *(volatile unsigned short *)port = value;
+        else if (is_pci_ioaddr(port))
+                *((unsigned short *)pci_ioaddr(port)) = value;
+        else if (port >= 0x2000)
+                *port2adr(port) = value;
+        else
+                maybebadio(port);
+}
+
+void sh7751se_outl(unsigned int value, unsigned long port)
+{
+        if (PXSEG(port))
+                *(volatile unsigned long *)port = value;
+        else if (is_pci_ioaddr(port))
+                *((unsigned long*)pci_ioaddr(port)) = value;
+        else
+                maybebadio(port);
+}
+
+void sh7751se_insl(unsigned long port, void *addr, unsigned long count)
+{
+        maybebadio(port);
+}
+
+void sh7751se_outsl(unsigned long port, const void *addr, unsigned long count)
+{
+        maybebadio(port);
+}
diff --git a/arch/sh/boards/mach-se/7751/irq.c b/arch/sh/boards/mach-se/7751/irq.c
new file mode 100644
index 000000000000..5c9847ea1e7c
--- /dev/null
+++ b/arch/sh/boards/mach-se/7751/irq.c
@@ -0,0 +1,50 @@
+/*
+ * linux/arch/sh/boards/se/7751/irq.c
+ *
+ * Copyright (C) 2000  Kazumoto Kojima
+ *
+ * Hitachi SolutionEngine Support.
+ *
+ * Modified for 7751 Solution Engine by
+ * Ian da Silva and Jeremy Siegel, 2001.
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <asm/irq.h>
+#include <mach-se/mach/se7751.h>
+
+static struct ipr_data ipr_irq_table[] = {
+        { 13, 3, 3, 2 },
+        /* Add additional entries here as drivers are added and tested. */
+};
+
+static unsigned long ipr_offsets[] = {
+        BCR_ILCRA,
+        BCR_ILCRB,
+        BCR_ILCRC,
+        BCR_ILCRD,
+        BCR_ILCRE,
+        BCR_ILCRF,
+        BCR_ILCRG,
+};
+
+static struct ipr_desc ipr_irq_desc = {
+        .ipr_offsets    = ipr_offsets,
+        .nr_offsets     = ARRAY_SIZE(ipr_offsets),
+
+        .ipr_data       = ipr_irq_table,
+        .nr_irqs        = ARRAY_SIZE(ipr_irq_table),
+
+        .chip = {
+                .name   = "IPR-se7751",
+        },
+};
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_7751se_IRQ(void)
+{
+        register_ipr_controller(&ipr_irq_desc);
+}
diff --git a/arch/sh/boards/se/7751/pci.c b/arch/sh/boards/mach-se/7751/pci.c
index 203b2923fe7f..203b2923fe7f 100644
--- a/arch/sh/boards/se/7751/pci.c
+++ b/arch/sh/boards/mach-se/7751/pci.c
diff --git a/arch/sh/boards/mach-se/7751/setup.c b/arch/sh/boards/mach-se/7751/setup.c
new file mode 100644
index 000000000000..50572512e3e8
--- /dev/null
+++ b/arch/sh/boards/mach-se/7751/setup.c
@@ -0,0 +1,78 @@
+/*
+ * linux/arch/sh/boards/se/7751/setup.c
+ *
+ * Copyright (C) 2000  Kazumoto Kojima
+ *
+ * Hitachi SolutionEngine Support.
+ *
+ * Modified for 7751 Solution Engine by
+ * Ian da Silva and Jeremy Siegel, 2001.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <asm/machvec.h>
+#include <mach-se/mach/se7751.h>
+#include <asm/io.h>
+#include <asm/heartbeat.h>
+
+static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
+
+static struct heartbeat_data heartbeat_data = {
+        .bit_pos        = heartbeat_bit_pos,
+        .nr_bits        = ARRAY_SIZE(heartbeat_bit_pos),
+};
+
+static struct resource heartbeat_resources[] = {
+        [0] = {
+                .start  = PA_LED,
+                .end    = PA_LED,
+                .flags  = IORESOURCE_MEM,
+        },
+};
+
+static struct platform_device heartbeat_device = {
+        .name           = "heartbeat",
+        .id             = -1,
+        .dev    = {
+                .platform_data  = &heartbeat_data,
+        },
+        .num_resources  = ARRAY_SIZE(heartbeat_resources),
+        .resource       = heartbeat_resources,
+};
+
+static struct platform_device *se7751_devices[] __initdata = {
+        &heartbeat_device,
+};
+
+static int __init se7751_devices_setup(void)
+{
+        return platform_add_devices(se7751_devices, ARRAY_SIZE(se7751_devices));
+}
+__initcall(se7751_devices_setup);
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_7751se __initmv = {
+        .mv_name                = "7751 SolutionEngine",
+        .mv_nr_irqs             = 72,
+
+        .mv_inb                 = sh7751se_inb,
+        .mv_inw                 = sh7751se_inw,
+        .mv_inl                 = sh7751se_inl,
+        .mv_outb                = sh7751se_outb,
+        .mv_outw                = sh7751se_outw,
+        .mv_outl                = sh7751se_outl,
+
+        .mv_inb_p               = sh7751se_inb_p,
+        .mv_inw_p               = sh7751se_inw,
+        .mv_inl_p               = sh7751se_inl,
+        .mv_outb_p              = sh7751se_outb_p,
+        .mv_outw_p              = sh7751se_outw,
+        .mv_outl_p              = sh7751se_outl,
+
+        .mv_insl                = sh7751se_insl,
+        .mv_outsl               = sh7751se_outsl,
+
+        .mv_init_irq            = init_7751se_IRQ,
+};
diff --git a/arch/sh/boards/se/7780/Makefile b/arch/sh/boards/mach-se/7780/Makefile
index 6b88adae3ecc..6b88adae3ecc 100644
--- a/arch/sh/boards/se/7780/Makefile
+++ b/arch/sh/boards/mach-se/7780/Makefile
diff --git a/arch/sh/boards/mach-se/7780/irq.c b/arch/sh/boards/mach-se/7780/irq.c
new file mode 100644
index 000000000000..66ad292c9fc3
--- /dev/null
+++ b/arch/sh/boards/mach-se/7780/irq.c
@@ -0,0 +1,46 @@
+/*
+ * linux/arch/sh/boards/se/7780/irq.c
+ *
+ * Copyright (C) 2006,2007  Nobuhiro Iwamatsu
+ *
+ * Hitachi UL SolutionEngine 7780 Support.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <mach-se/mach/se7780.h>
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_se7780_IRQ(void)
+{
+        /* enable all interrupt at FPGA */
+        ctrl_outw(0, FPGA_INTMSK1);
+        /* mask SM501 interrupt */
+        ctrl_outw((ctrl_inw(FPGA_INTMSK1) | 0x0002), FPGA_INTMSK1);
+        /* enable all interrupt at FPGA */
+        ctrl_outw(0, FPGA_INTMSK2);
+
+        /* set FPGA INTSEL register */
+        /* FPGA + 0x06 */
+        ctrl_outw( ((IRQPIN_SM501 << IRQPOS_SM501) |
+                (IRQPIN_SMC91CX << IRQPOS_SMC91CX)), FPGA_INTSEL1);
+
+        /* FPGA + 0x08 */
+        ctrl_outw(((IRQPIN_EXTINT4 << IRQPOS_EXTINT4) |
+                (IRQPIN_EXTINT3 << IRQPOS_EXTINT3) |
+                (IRQPIN_EXTINT2 << IRQPOS_EXTINT2) |
+                (IRQPIN_EXTINT1 << IRQPOS_EXTINT1)), FPGA_INTSEL2);
+
+        /* FPGA + 0x0A */
+        ctrl_outw((IRQPIN_PCCPW << IRQPOS_PCCPW), FPGA_INTSEL3);
+
+        plat_irq_setup_pins(IRQ_MODE_IRQ); /* install handlers for IRQ0-7 */
+}
diff --git a/arch/sh/boards/mach-se/7780/setup.c b/arch/sh/boards/mach-se/7780/setup.c
new file mode 100644
index 000000000000..1d3a867e94e3
--- /dev/null
+++ b/arch/sh/boards/mach-se/7780/setup.c
@@ -0,0 +1,124 @@
+/*
+ * linux/arch/sh/boards/se/7780/setup.c
+ *
+ * Copyright (C) 2006,2007  Nobuhiro Iwamatsu
+ *
+ * Hitachi UL SolutionEngine 7780 Support.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <asm/machvec.h>
+#include <mach-se/mach/se7780.h>
+#include <asm/io.h>
+#include <asm/heartbeat.h>
+
+/* Heartbeat */
+static struct heartbeat_data heartbeat_data = {
+        .regsize = 16,
+};
+
+static struct resource heartbeat_resources[] = {
+        [0] = {
+                .start  = PA_LED,
+                .end    = PA_LED,
+                .flags  = IORESOURCE_MEM,
+        },
+};
+
+static struct platform_device heartbeat_device = {
+        .name           = "heartbeat",
+        .id             = -1,
+        .dev = {
+                .platform_data = &heartbeat_data,
+        },
+        .num_resources  = ARRAY_SIZE(heartbeat_resources),
+        .resource       = heartbeat_resources,
+};
+
+/* SMC91x */
+static struct resource smc91x_eth_resources[] = {
+        [0] = {
+                .name   = "smc91x-regs" ,
+                .start  = PA_LAN + 0x300,
+                .end    = PA_LAN + 0x300 + 0x10 ,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = SMC_IRQ,
+                .end    = SMC_IRQ,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device smc91x_eth_device = {
+        .name           = "smc91x",
+        .id             = 0,
+        .dev = {
+                .dma_mask               = NULL,         /* don't use dma */
+                .coherent_dma_mask      = 0xffffffff,
+        },
+        .num_resources  = ARRAY_SIZE(smc91x_eth_resources),
+        .resource       = smc91x_eth_resources,
+};
+
+static struct platform_device *se7780_devices[] __initdata = {
+        &heartbeat_device,
+        &smc91x_eth_device,
+};
+
+static int __init se7780_devices_setup(void)
+{
+        return platform_add_devices(se7780_devices,
+                ARRAY_SIZE(se7780_devices));
+}
+device_initcall(se7780_devices_setup);
+
+#define GPIO_PHCR        0xFFEA000E
+#define GPIO_PMSELR      0xFFEA0080
+#define GPIO_PECR        0xFFEA0008
+
+static void __init se7780_setup(char **cmdline_p)
+{
+        /* "SH-Linux" on LED Display */
+        ctrl_outw( 'S' , PA_LED_DISP + (DISP_SEL0_ADDR << 1) );
+        ctrl_outw( 'H' , PA_LED_DISP + (DISP_SEL1_ADDR << 1) );
+        ctrl_outw( '-' , PA_LED_DISP + (DISP_SEL2_ADDR << 1) );
+        ctrl_outw( 'L' , PA_LED_DISP + (DISP_SEL3_ADDR << 1) );
+        ctrl_outw( 'i' , PA_LED_DISP + (DISP_SEL4_ADDR << 1) );
+        ctrl_outw( 'n' , PA_LED_DISP + (DISP_SEL5_ADDR << 1) );
+        ctrl_outw( 'u' , PA_LED_DISP + (DISP_SEL6_ADDR << 1) );
+        ctrl_outw( 'x' , PA_LED_DISP + (DISP_SEL7_ADDR << 1) );
+
+        printk(KERN_INFO "Hitachi UL Solutions Engine 7780SE03 support.\n");
+
+        /*
+         * PCI REQ/GNT setting
+         *   REQ0/GNT0 -> USB
+         *   REQ1/GNT1 -> PC Card
+         *   REQ2/GNT2 -> Serial ATA
+         *   REQ3/GNT3 -> PCI slot
+         */
+        ctrl_outw(0x0213, FPGA_REQSEL);
+
+        /* GPIO setting */
+        ctrl_outw(0x0000, GPIO_PECR);
+        ctrl_outw(ctrl_inw(GPIO_PHCR)&0xfff3, GPIO_PHCR);
+        ctrl_outw(0x0c00, GPIO_PMSELR);
+
+        /* iVDR Power ON */
+        ctrl_outw(0x0001, FPGA_IVDRPW);
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_se7780 __initmv = {
+        .mv_name                = "Solution Engine 7780" ,
+        .mv_setup               = se7780_setup ,
+        .mv_nr_irqs             = 111 ,
+        .mv_init_irq            = init_se7780_IRQ,
+};
diff --git a/arch/sh/boards/mach-se/Makefile b/arch/sh/boards/mach-se/Makefile
new file mode 100644
index 000000000000..2de42bae4b4f
--- /dev/null
+++ b/arch/sh/boards/mach-se/Makefile
@@ -0,0 +1,9 @@
+obj-$(CONFIG_SH_7619_SOLUTION_ENGINE)   += board-se7619.o
+
+obj-$(CONFIG_SH_SOLUTION_ENGINE)        += 770x/
+obj-$(CONFIG_SH_7206_SOLUTION_ENGINE)   += 7206/
+obj-$(CONFIG_SH_7722_SOLUTION_ENGINE)   += 7722/
+obj-$(CONFIG_SH_7751_SOLUTION_ENGINE)   += 7751/
+obj-$(CONFIG_SH_7780_SOLUTION_ENGINE)   += 7780/
+obj-$(CONFIG_SH_7343_SOLUTION_ENGINE)   += 7343/
+obj-$(CONFIG_SH_7721_SOLUTION_ENGINE)   += 7721/
diff --git a/arch/sh/boards/se/7619/setup.c b/arch/sh/boards/mach-se/board-se7619.c
index 1d0ef7faa10d..1d0ef7faa10d 100644
--- a/arch/sh/boards/se/7619/setup.c
+++ b/arch/sh/boards/mach-se/board-se7619.c
diff --git a/arch/sh/boards/sh03/Makefile b/arch/sh/boards/mach-sh03/Makefile
index 400306a796ec..400306a796ec 100644
--- a/arch/sh/boards/sh03/Makefile
+++ b/arch/sh/boards/mach-sh03/Makefile
diff --git a/arch/sh/boards/sh03/rtc.c b/arch/sh/boards/mach-sh03/rtc.c
index 0a9266bb51c5..0a9266bb51c5 100644
--- a/arch/sh/boards/sh03/rtc.c
+++ b/arch/sh/boards/mach-sh03/rtc.c
diff --git a/arch/sh/boards/mach-sh03/setup.c b/arch/sh/boards/mach-sh03/setup.c
new file mode 100644
index 000000000000..5771219be3fd
--- /dev/null
+++ b/arch/sh/boards/mach-sh03/setup.c
@@ -0,0 +1,75 @@
+/*
+ * linux/arch/sh/boards/sh03/setup.c
+ *
+ * Copyright (C) 2004  Interface Co.,Ltd. Saito.K
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <asm/io.h>
+#include <asm/rtc.h>
+#include <mach-sh03/mach/io.h>
+#include <mach-sh03/mach/sh03.h>
+#include <asm/addrspace.h>
+
+static void __init init_sh03_IRQ(void)
+{
+        plat_irq_setup_pins(IRQ_MODE_IRQ);
+}
+
+extern void *cf_io_base;
+
+static void __iomem *sh03_ioport_map(unsigned long port, unsigned int size)
+{
+        if (PXSEG(port))
+                return (void __iomem *)port;
+        /* CompactFlash (IDE) */
+        if (((port >= 0x1f0) && (port <= 0x1f7)) || (port == 0x3f6))
+                return (void __iomem *)((unsigned long)cf_io_base + port);
+
+        return (void __iomem *)(port + PCI_IO_BASE);
+}
+
+/* arch/sh/boards/sh03/rtc.c */
+void sh03_time_init(void);
+
+static void __init sh03_setup(char **cmdline_p)
+{
+        board_time_init = sh03_time_init;
+}
+
+static struct resource heartbeat_resources[] = {
+        [0] = {
+                .start  = 0xa0800000,
+                .end    = 0xa0800000,
+                .flags  = IORESOURCE_MEM,
+        },
+};
+
+static struct platform_device heartbeat_device = {
+        .name           = "heartbeat",
+        .id             = -1,
+        .num_resources  = ARRAY_SIZE(heartbeat_resources),
+        .resource       = heartbeat_resources,
+};
+
+static struct platform_device *sh03_devices[] __initdata = {
+        &heartbeat_device,
+};
+
+static int __init sh03_devices_setup(void)
+{
+        return platform_add_devices(sh03_devices, ARRAY_SIZE(sh03_devices));
+}
+__initcall(sh03_devices_setup);
+
+static struct sh_machine_vector mv_sh03 __initmv = {
+        .mv_name                = "Interface (CTP/PCI-SH03)",
+        .mv_setup               = sh03_setup,
+        .mv_nr_irqs             = 48,
+        .mv_ioport_map          = sh03_ioport_map,
+        .mv_init_irq            = init_sh03_IRQ,
+};
diff --git a/arch/sh/boards/mach-sh7763rdp/Makefile b/arch/sh/boards/mach-sh7763rdp/Makefile
new file mode 100644
index 000000000000..f6c0b55516d2
--- /dev/null
+++ b/arch/sh/boards/mach-sh7763rdp/Makefile
@@ -0,0 +1 @@
+obj-y    := setup.o irq.o
diff --git a/arch/sh/boards/mach-sh7763rdp/irq.c b/arch/sh/boards/mach-sh7763rdp/irq.c
new file mode 100644
index 000000000000..fd850bad2dec
--- /dev/null
+++ b/arch/sh/boards/mach-sh7763rdp/irq.c
@@ -0,0 +1,45 @@
+/*
+ * linux/arch/sh/boards/renesas/sh7763rdp/irq.c
+ *
+ * Renesas Solutions SH7763RDP Support.
+ *
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ * Copyright (C) 2008  Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/sh7763rdp.h>
+
+#define INTC_BASE               (0xFFD00000)
+#define INTC_INT2PRI7   (INTC_BASE+0x4001C)
+#define INTC_INT2MSKCR  (INTC_BASE+0x4003C)
+#define INTC_INT2MSKCR1 (INTC_BASE+0x400D4)
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_sh7763rdp_IRQ(void)
+{
+        /* GPIO enabled */
+        ctrl_outl(1 << 25, INTC_INT2MSKCR);
+
+        /* enable GPIO interrupts */
+        ctrl_outl((ctrl_inl(INTC_INT2PRI7) & 0xFF00FFFF) | 0x000F0000,
+                  INTC_INT2PRI7);
+
+        /* USBH enabled */
+        ctrl_outl(1 << 17, INTC_INT2MSKCR1);
+
+        /* GETHER enabled */
+        ctrl_outl(1 << 16, INTC_INT2MSKCR1);
+
+        /* DMAC enabled */
+        ctrl_outl(1 << 8, INTC_INT2MSKCR);
+}
diff --git a/arch/sh/boards/mach-sh7763rdp/setup.c b/arch/sh/boards/mach-sh7763rdp/setup.c
new file mode 100644
index 000000000000..925f16af7121
--- /dev/null
+++ b/arch/sh/boards/mach-sh7763rdp/setup.c
@@ -0,0 +1,128 @@
+/*
+ * linux/arch/sh/boards/renesas/sh7763rdp/setup.c
+ *
+ * Renesas Solutions sh7763rdp board
+ *
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/mtd/physmap.h>
+#include <asm/io.h>
+#include <asm/sh7763rdp.h>
+
+/* NOR Flash */
+static struct mtd_partition sh7763rdp_nor_flash_partitions[] = {
+        {
+                .name = "U-Boot",
+                .offset = 0,
+                .size = (2 * 128 * 1024),
+                .mask_flags = MTD_WRITEABLE,    /* Read-only */
+        }, {
+                .name = "Linux-Kernel",
+                .offset = MTDPART_OFS_APPEND,
+                .size = (20 * 128 * 1024),
+        }, {
+                .name = "Root Filesystem",
+                .offset = MTDPART_OFS_APPEND,
+                .size = MTDPART_SIZ_FULL,
+        },
+};
+
+static struct physmap_flash_data sh7763rdp_nor_flash_data = {
+        .width = 2,
+        .parts = sh7763rdp_nor_flash_partitions,
+        .nr_parts = ARRAY_SIZE(sh7763rdp_nor_flash_partitions),
+};
+
+static struct resource sh7763rdp_nor_flash_resources[] = {
+        [0] = {
+                .name = "NOR Flash",
+                .start = 0,
+                .end = (64 * 1024 * 1024),
+                .flags = IORESOURCE_MEM,
+        },
+};
+
+static struct platform_device sh7763rdp_nor_flash_device = {
+        .name = "physmap-flash",
+        .resource = sh7763rdp_nor_flash_resources,
+        .num_resources = ARRAY_SIZE(sh7763rdp_nor_flash_resources),
+        .dev = {
+                .platform_data = &sh7763rdp_nor_flash_data,
+        },
+};
+
+static struct platform_device *sh7763rdp_devices[] __initdata = {
+        &sh7763rdp_nor_flash_device,
+};
+
+static int __init sh7763rdp_devices_setup(void)
+{
+        return platform_add_devices(sh7763rdp_devices,
+                                    ARRAY_SIZE(sh7763rdp_devices));
+}
+__initcall(sh7763rdp_devices_setup);
+
+static void __init sh7763rdp_setup(char **cmdline_p)
+{
+        /* Board version check */
+        if (ctrl_inw(CPLD_BOARD_ID_ERV_REG) == 0xECB1)
+                printk(KERN_INFO "RTE Standard Configuration\n");
+        else
+                printk(KERN_INFO "RTA Standard Configuration\n");
+
+        /* USB pin select bits (clear bit 5-2 to 0) */
+        ctrl_outw((ctrl_inw(PORT_PSEL2) & 0xFFC3), PORT_PSEL2);
+        /* USBH setup port I controls to other (clear bits 4-9 to 0) */
+        ctrl_outw(ctrl_inw(PORT_PICR) & 0xFC0F, PORT_PICR);
+
+        /* Select USB Host controller */
+        ctrl_outw(0x00, USB_USBHSC);
+
+        /* For LCD */
+        /* set PTJ7-1, bits 15-2 of PJCR to 0 */
+        ctrl_outw(ctrl_inw(PORT_PJCR) & 0x0003, PORT_PJCR);
+        /* set PTI5, bits 11-10 of PICR to 0 */
+        ctrl_outw(ctrl_inw(PORT_PICR) & 0xF3FF, PORT_PICR);
+        ctrl_outw(0, PORT_PKCR);
+        ctrl_outw(0, PORT_PLCR);
+        /* set PSEL2 bits 14-8, 5-4, of PSEL2 to 0 */
+        ctrl_outw((ctrl_inw(PORT_PSEL2) & 0x00C0), PORT_PSEL2);
+        /* set PSEL3 bits 14-12, 6-4, 2-0 of PSEL3 to 0 */
+        ctrl_outw((ctrl_inw(PORT_PSEL3) & 0x0700), PORT_PSEL3);
+
+        /* For HAC */
+        /* bit3-0  0100:HAC & SSI1 enable */
+        ctrl_outw((ctrl_inw(PORT_PSEL1) & 0xFFF0) | 0x0004, PORT_PSEL1);
+        /* bit14      1:SSI_HAC_CLK enable */
+        ctrl_outw(ctrl_inw(PORT_PSEL4) | 0x4000, PORT_PSEL4);
+
+        /* SH-Ether */
+        ctrl_outw((ctrl_inw(PORT_PSEL1) & ~0xff00) | 0x2400, PORT_PSEL1);
+        ctrl_outw(0x0, PORT_PFCR);
+        ctrl_outw(0x0, PORT_PFCR);
+        ctrl_outw(0x0, PORT_PFCR);
+
+        /* MMC */
+        /*selects SCIF and MMC other functions */
+        ctrl_outw(0x0001, PORT_PSEL0);
+        /* MMC clock operates */
+        ctrl_outl(ctrl_inl(MSTPCR1) & ~0x8, MSTPCR1);
+        ctrl_outw(ctrl_inw(PORT_PACR) & ~0x3000, PORT_PACR);
+        ctrl_outw(ctrl_inw(PORT_PCCR) & ~0xCFC3, PORT_PCCR);
+}
+
+static struct sh_machine_vector mv_sh7763rdp __initmv = {
+        .mv_name = "sh7763drp",
+        .mv_setup = sh7763rdp_setup,
+        .mv_nr_irqs = 112,
+        .mv_init_irq = init_sh7763rdp_IRQ,
+};
diff --git a/arch/sh/boards/snapgear/Makefile b/arch/sh/boards/mach-snapgear/Makefile
index d2d2f4b6a502..d2d2f4b6a502 100644
--- a/arch/sh/boards/snapgear/Makefile
+++ b/arch/sh/boards/mach-snapgear/Makefile
diff --git a/arch/sh/boards/snapgear/io.c b/arch/sh/boards/mach-snapgear/io.c
index 0f4824264557..0f4824264557 100644
--- a/arch/sh/boards/snapgear/io.c
+++ b/arch/sh/boards/mach-snapgear/io.c
diff --git a/arch/sh/boards/mach-snapgear/setup.c b/arch/sh/boards/mach-snapgear/setup.c
new file mode 100644
index 000000000000..a5e349d3dda2
--- /dev/null
+++ b/arch/sh/boards/mach-snapgear/setup.c
@@ -0,0 +1,95 @@
+/*
+ * linux/arch/sh/boards/snapgear/setup.c
+ *
+ * Copyright (C) 2002  David McCullough <davidm@snapgear.com>
+ * Copyright (C) 2003  Paul Mundt <lethal@linux-sh.org>
+ *
+ * Based on files with the following comments:
+ *
+ *           Copyright (C) 2000  Kazumoto Kojima
+ *
+ *           Modified for 7751 Solution Engine by
+ *           Ian da Silva and Jeremy Siegel, 2001.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/timer.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <asm/machvec.h>
+#include <asm/snapgear.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <cpu/timer.h>
+
+/*
+ * EraseConfig handling functions
+ */
+
+static irqreturn_t eraseconfig_interrupt(int irq, void *dev_id)
+{
+        (void)ctrl_inb(0xb8000000);     /* dummy read */
+
+        printk("SnapGear: erase switch interrupt!\n");
+
+        return IRQ_HANDLED;
+}
+
+static int __init eraseconfig_init(void)
+{
+        printk("SnapGear: EraseConfig init\n");
+        /* Setup "EraseConfig" switch on external IRQ 0 */
+        if (request_irq(IRL0_IRQ, eraseconfig_interrupt, IRQF_DISABLED,
+                                "Erase Config", NULL))
+                printk("SnapGear: failed to register IRQ%d for Reset witch\n",
+                                IRL0_IRQ);
+        else
+                printk("SnapGear: registered EraseConfig switch on IRQ%d\n",
+                                IRL0_IRQ);
+        return(0);
+}
+
+module_init(eraseconfig_init);
+
+/****************************************************************************/
+/*
+ * Initialize IRQ setting
+ *
+ * IRL0 = erase switch
+ * IRL1 = eth0
+ * IRL2 = eth1
+ * IRL3 = crypto
+ */
+
+static void __init init_snapgear_IRQ(void)
+{
+        printk("Setup SnapGear IRQ/IPR ...\n");
+        /* enable individual interrupt mode for externals */
+        plat_irq_setup_pins(IRQ_MODE_IRQ);
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_snapgear __initmv = {
+        .mv_name                = "SnapGear SecureEdge5410",
+        .mv_nr_irqs             = 72,
+
+        .mv_inb                 = snapgear_inb,
+        .mv_inw                 = snapgear_inw,
+        .mv_inl                 = snapgear_inl,
+        .mv_outb                = snapgear_outb,
+        .mv_outw                = snapgear_outw,
+        .mv_outl                = snapgear_outl,
+
+        .mv_inb_p               = snapgear_inb_p,
+        .mv_inw_p               = snapgear_inw,
+        .mv_inl_p               = snapgear_inl,
+        .mv_outb_p              = snapgear_outb_p,
+        .mv_outw_p              = snapgear_outw,
+        .mv_outl_p              = snapgear_outl,
+
+        .mv_init_irq            = init_snapgear_IRQ,
+};
diff --git a/arch/sh/boards/renesas/systemh/Makefile b/arch/sh/boards/mach-systemh/Makefile
index 2cc6a23d9d39..2cc6a23d9d39 100644
--- a/arch/sh/boards/renesas/systemh/Makefile
+++ b/arch/sh/boards/mach-systemh/Makefile
diff --git a/arch/sh/boards/renesas/systemh/io.c b/arch/sh/boards/mach-systemh/io.c
index 1b767e1a1428..1b767e1a1428 100644
--- a/arch/sh/boards/renesas/systemh/io.c
+++ b/arch/sh/boards/mach-systemh/io.c
diff --git a/arch/sh/boards/renesas/systemh/irq.c b/arch/sh/boards/mach-systemh/irq.c
index 0ba2fe674c47..0ba2fe674c47 100644
--- a/arch/sh/boards/renesas/systemh/irq.c
+++ b/arch/sh/boards/mach-systemh/irq.c
diff --git a/arch/sh/boards/renesas/systemh/setup.c b/arch/sh/boards/mach-systemh/setup.c
index ee78af842778..ee78af842778 100644
--- a/arch/sh/boards/renesas/systemh/setup.c
+++ b/arch/sh/boards/mach-systemh/setup.c
diff --git a/arch/sh/boards/titan/Makefile b/arch/sh/boards/mach-titan/Makefile
index 08d753700062..08d753700062 100644
--- a/arch/sh/boards/titan/Makefile
+++ b/arch/sh/boards/mach-titan/Makefile
diff --git a/arch/sh/boards/titan/io.c b/arch/sh/boards/mach-titan/io.c
index 4730c1dd697d..4730c1dd697d 100644
--- a/arch/sh/boards/titan/io.c
+++ b/arch/sh/boards/mach-titan/io.c
diff --git a/arch/sh/boards/titan/setup.c b/arch/sh/boards/mach-titan/setup.c
index 5de3b2ad71af..5de3b2ad71af 100644
--- a/arch/sh/boards/titan/setup.c
+++ b/arch/sh/boards/mach-titan/setup.c
diff --git a/arch/sh/boards/renesas/x3proto/Makefile b/arch/sh/boards/mach-x3proto/Makefile
index 983e4551fecf..983e4551fecf 100644
--- a/arch/sh/boards/renesas/x3proto/Makefile
+++ b/arch/sh/boards/mach-x3proto/Makefile
diff --git a/arch/sh/boards/renesas/x3proto/ilsel.c b/arch/sh/boards/mach-x3proto/ilsel.c
index b5c673c39337..b5c673c39337 100644
--- a/arch/sh/boards/renesas/x3proto/ilsel.c
+++ b/arch/sh/boards/mach-x3proto/ilsel.c
diff --git a/arch/sh/boards/renesas/x3proto/setup.c b/arch/sh/boards/mach-x3proto/setup.c
index abc5b6d418fe..abc5b6d418fe 100644
--- a/arch/sh/boards/renesas/x3proto/setup.c
+++ b/arch/sh/boards/mach-x3proto/setup.c
diff --git a/arch/sh/boards/magicpanelr2/Kconfig b/arch/sh/boards/magicpanelr2/Kconfig
deleted file mode 100644
index b0abddc3e84f..000000000000
--- a/arch/sh/boards/magicpanelr2/Kconfig
+++ /dev/null
@@ -1,13 +0,0 @@
-if SH_MAGIC_PANEL_R2
-
-menu "Magic Panel R2 options"
-
-config SH_MAGIC_PANEL_R2_VERSION
-        int SH_MAGIC_PANEL_R2_VERSION
-        default "3"
-        help
-          Set the version of the Magic Panel R2
-
-endmenu
-
-endif
diff --git a/arch/sh/boards/magicpanelr2/Makefile b/arch/sh/boards/magicpanelr2/Makefile
deleted file mode 100644
index 7a6d586b9072..000000000000
--- a/arch/sh/boards/magicpanelr2/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for the Magic Panel specific parts
-#
-
-obj-y    := setup.o
\ No newline at end of file
diff --git a/arch/sh/boards/renesas/migor/Makefile b/arch/sh/boards/renesas/migor/Makefile
deleted file mode 100644
index 77037567633b..000000000000
--- a/arch/sh/boards/renesas/migor/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-obj-y    := setup.o
diff --git a/arch/sh/boards/renesas/migor/setup.c b/arch/sh/boards/renesas/migor/setup.c
deleted file mode 100644
index 963c99322095..000000000000
--- a/arch/sh/boards/renesas/migor/setup.c
+++ /dev/null
@@ -1,257 +0,0 @@
-/*
- * Renesas System Solutions Asia Pte. Ltd - Migo-R
- *
- * Copyright (C) 2008 Magnus Damm
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/input.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/nand.h>
-#include <linux/i2c.h>
-#include <linux/smc91x.h>
-#include <asm/machvec.h>
-#include <asm/io.h>
-#include <asm/sh_keysc.h>
-#include <asm/migor.h>
-
-/* Address     IRQ  Size  Bus  Description
- * 0x00000000       64MB  16   NOR Flash (SP29PL256N)
- * 0x0c000000       64MB  64   SDRAM (2xK4M563233G)
- * 0x10000000  IRQ0       16   Ethernet (SMC91C111)
- * 0x14000000  IRQ4       16   USB 2.0 Host Controller (M66596)
- * 0x18000000       8GB    8   NAND Flash (K9K8G08U0A)
- */
-
-static struct smc91x_platdata smc91x_info = {
-        .flags = SMC91X_USE_16BIT,
-};
-
-static struct resource smc91x_eth_resources[] = {
-        [0] = {
-                .name   = "SMC91C111" ,
-                .start  = 0x10000300,
-                .end    = 0x1000030f,
-                .flags  = IORESOURCE_MEM,
-        },
-        [1] = {
-                .start  = 32, /* IRQ0 */
-                .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-        },
-};
-
-static struct platform_device smc91x_eth_device = {
-        .name           = "smc91x",
-        .num_resources  = ARRAY_SIZE(smc91x_eth_resources),
-        .resource       = smc91x_eth_resources,
-        .dev    = {
-                .platform_data  = &smc91x_info,
-        },
-};
-
-static struct sh_keysc_info sh_keysc_info = {
-        .mode = SH_KEYSC_MODE_2, /* KEYOUT0->4, KEYIN1->5 */
-        .scan_timing = 3,
-        .delay = 5,
-        .keycodes = {
-                0, KEY_UP, KEY_DOWN, KEY_LEFT, KEY_RIGHT, KEY_ENTER,
-                0, KEY_F, KEY_C, KEY_D, KEY_H, KEY_1,
-                0, KEY_2, KEY_3, KEY_4, KEY_5, KEY_6,
-                0, KEY_7, KEY_8, KEY_9, KEY_S, KEY_0,
-                0, KEY_P, KEY_STOP, KEY_REWIND, KEY_PLAY, KEY_FASTFORWARD,
-        },
-};
-
-static struct resource sh_keysc_resources[] = {
-        [0] = {
-                .start  = 0x044b0000,
-                .end    = 0x044b000f,
-                .flags  = IORESOURCE_MEM,
-        },
-        [1] = {
-                .start  = 79,
-                .flags  = IORESOURCE_IRQ,
-        },
-};
-
-static struct platform_device sh_keysc_device = {
-        .name           = "sh_keysc",
-        .num_resources  = ARRAY_SIZE(sh_keysc_resources),
-        .resource       = sh_keysc_resources,
-        .dev    = {
-                .platform_data  = &sh_keysc_info,
-        },
-};
-
-static struct mtd_partition migor_nor_flash_partitions[] =
-{
-        {
-                .name = "uboot",
-                .offset = 0,
-                .size = (1 * 1024 * 1024),
-                .mask_flags = MTD_WRITEABLE,    /* Read-only */
-        },
-        {
-                .name = "rootfs",
-                .offset = MTDPART_OFS_APPEND,
-                .size = (15 * 1024 * 1024),
-        },
-        {
-                .name = "other",
-                .offset = MTDPART_OFS_APPEND,
-                .size = MTDPART_SIZ_FULL,
-        },
-};
-
-static struct physmap_flash_data migor_nor_flash_data = {
-        .width          = 2,
-        .parts          = migor_nor_flash_partitions,
-        .nr_parts       = ARRAY_SIZE(migor_nor_flash_partitions),
-};
-
-static struct resource migor_nor_flash_resources[] = {
-        [0] = {
-                .name           = "NOR Flash",
-                .start          = 0x00000000,
-                .end            = 0x03ffffff,
-                .flags          = IORESOURCE_MEM,
-        }
-};
-
-static struct platform_device migor_nor_flash_device = {
-        .name           = "physmap-flash",
-        .resource       = migor_nor_flash_resources,
-        .num_resources  = ARRAY_SIZE(migor_nor_flash_resources),
-        .dev            = {
-                .platform_data = &migor_nor_flash_data,
-        },
-};
-
-static struct mtd_partition migor_nand_flash_partitions[] = {
-        {
-                .name           = "nanddata1",
-                .offset         = 0x0,
-                .size           = 512 * 1024 * 1024,
-        },
-        {
-                .name           = "nanddata2",
-                .offset         = MTDPART_OFS_APPEND,
-                .size           = 512 * 1024 * 1024,
-        },
-};
-
-static void migor_nand_flash_cmd_ctl(struct mtd_info *mtd, int cmd,
-                                     unsigned int ctrl)
-{
-        struct nand_chip *chip = mtd->priv;
-
-        if (cmd == NAND_CMD_NONE)
-                return;
-
-        if (ctrl & NAND_CLE)
-                writeb(cmd, chip->IO_ADDR_W + 0x00400000);
-        else if (ctrl & NAND_ALE)
-                writeb(cmd, chip->IO_ADDR_W + 0x00800000);
-        else
-                writeb(cmd, chip->IO_ADDR_W);
-}
-
-static int migor_nand_flash_ready(struct mtd_info *mtd)
-{
-        return ctrl_inb(PORT_PADR) & 0x02; /* PTA1 */
-}
-
-struct platform_nand_data migor_nand_flash_data = {
-        .chip = {
-                .nr_chips = 1,
-                .partitions = migor_nand_flash_partitions,
-                .nr_partitions = ARRAY_SIZE(migor_nand_flash_partitions),
-                .chip_delay = 20,
-                .part_probe_types = (const char *[]) { "cmdlinepart", NULL },
-        },
-        .ctrl = {
-                .dev_ready = migor_nand_flash_ready,
-                .cmd_ctrl = migor_nand_flash_cmd_ctl,
-        },
-};
-
-static struct resource migor_nand_flash_resources[] = {
-        [0] = {
-                .name           = "NAND Flash",
-                .start          = 0x18000000,
-                .end            = 0x18ffffff,
-                .flags          = IORESOURCE_MEM,
-        },
-};
-
-static struct platform_device migor_nand_flash_device = {
-        .name           = "gen_nand",
-        .resource       = migor_nand_flash_resources,
-        .num_resources  = ARRAY_SIZE(migor_nand_flash_resources),
-        .dev            = {
-                .platform_data = &migor_nand_flash_data,
-        }
-};
-
-static struct platform_device *migor_devices[] __initdata = {
-        &smc91x_eth_device,
-        &sh_keysc_device,
-        &migor_nor_flash_device,
-        &migor_nand_flash_device,
-};
-
-static struct i2c_board_info __initdata migor_i2c_devices[] = {
-        {
-                I2C_BOARD_INFO("rs5c372b", 0x32),
-        },
-        {
-                I2C_BOARD_INFO("migor_ts", 0x51),
-                .irq = 38, /* IRQ6 */
-        },
-};
-
-static int __init migor_devices_setup(void)
-{
-        i2c_register_board_info(0, migor_i2c_devices,
-                                ARRAY_SIZE(migor_i2c_devices));
- 
-        return platform_add_devices(migor_devices, ARRAY_SIZE(migor_devices));
-}
-__initcall(migor_devices_setup);
-
-static void __init migor_setup(char **cmdline_p)
-{
-        /* SMC91C111 - Enable IRQ0 */
-        ctrl_outw(ctrl_inw(PORT_PJCR) & ~0x0003, PORT_PJCR);
-
-        /* KEYSC */
-        ctrl_outw(ctrl_inw(PORT_PYCR) & ~0x0fff, PORT_PYCR);
-        ctrl_outw(ctrl_inw(PORT_PZCR) & ~0x0ff0, PORT_PZCR);
-        ctrl_outw(ctrl_inw(PORT_PSELA) & ~0x4100, PORT_PSELA);
-        ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x4000, PORT_HIZCRA);
-        ctrl_outw(ctrl_inw(PORT_HIZCRC) & ~0xc000, PORT_HIZCRC);
-        ctrl_outl(ctrl_inl(MSTPCR2) & ~0x00004000, MSTPCR2);
-
-        /* NAND Flash */
-        ctrl_outw(ctrl_inw(PORT_PXCR) & 0x0fff, PORT_PXCR);
-        ctrl_outl((ctrl_inl(BSC_CS6ABCR) & ~0x00000600) | 0x00000200,
-                  BSC_CS6ABCR);
-
-        /* I2C */
-        ctrl_outl(ctrl_inl(MSTPCR1) & ~0x00000200, MSTPCR1);
-
-        /* Touch Panel - Enable IRQ6 */
-        ctrl_outw(ctrl_inw(PORT_PZCR) & ~0xc, PORT_PZCR);
-        ctrl_outw((ctrl_inw(PORT_PSELA) | 0x8000), PORT_PSELA);
-        ctrl_outw((ctrl_inw(PORT_HIZCRC) & ~0x4000), PORT_HIZCRC);
-}
-
-static struct sh_machine_vector mv_migor __initmv = {
-        .mv_name                = "Migo-R",
-        .mv_setup               = migor_setup,
-};
diff --git a/arch/sh/boards/renesas/r7780rp/psw.c b/arch/sh/boards/renesas/r7780rp/psw.c
deleted file mode 100644
index c844dfa5d58d..000000000000
--- a/arch/sh/boards/renesas/r7780rp/psw.c
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * arch/sh/boards/renesas/r7780rp/psw.c
- *
- * push switch support for RDBRP-1/RDBREVRP-1 debug boards.
- *
- * Copyright (C) 2006  Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/io.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <asm/mach/r7780rp.h>
-#include <asm/push-switch.h>
-
-static irqreturn_t psw_irq_handler(int irq, void *arg)
-{
-        struct platform_device *pdev = arg;
-        struct push_switch *psw = platform_get_drvdata(pdev);
-        struct push_switch_platform_info *psw_info = pdev->dev.platform_data;
-        unsigned int l, mask;
-        int ret = 0;
-
-        l = ctrl_inw(PA_DBSW);
-
-        /* Nothing to do if there's no state change */
-        if (psw->state) {
-                ret = 1;
-                goto out;
-        }
-
-        mask = l & 0x70;
-        /* Figure out who raised it */
-        if (mask & (1 << psw_info->bit)) {
-                psw->state = !!(mask & (1 << psw_info->bit));
-                if (psw->state) /* debounce */
-                        mod_timer(&psw->debounce, jiffies + 50);
-
-                ret = 1;
-        }
-
-out:
-        /* Clear the switch IRQs */
-        l |= (0x7 << 12);
-        ctrl_outw(l, PA_DBSW);
-
-        return IRQ_RETVAL(ret);
-}
-
-static struct resource psw_resources[] = {
-        [0] = {
-                .start  = IRQ_PSW,
-                .flags  = IORESOURCE_IRQ,
-        },
-};
-
-static struct push_switch_platform_info s2_platform_data = {
-        .name           = "s2",
-        .bit            = 6,
-        .irq_flags      = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
-                          IRQF_SHARED,
-        .irq_handler    = psw_irq_handler,
-};
-
-static struct platform_device s2_switch_device = {
-        .name           = "push-switch",
-        .id             = 0,
-        .num_resources  = ARRAY_SIZE(psw_resources),
-        .resource       = psw_resources,
-        .dev            = {
-                .platform_data = &s2_platform_data,
-        },
-};
-
-static struct push_switch_platform_info s3_platform_data = {
-        .name           = "s3",
-        .bit            = 5,
-        .irq_flags      = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
-                          IRQF_SHARED,
-        .irq_handler    = psw_irq_handler,
-};
-
-static struct platform_device s3_switch_device = {
-        .name           = "push-switch",
-        .id             = 1,
-        .num_resources  = ARRAY_SIZE(psw_resources),
-        .resource       = psw_resources,
-        .dev            = {
-                .platform_data = &s3_platform_data,
-        },
-};
-
-static struct push_switch_platform_info s4_platform_data = {
-        .name           = "s4",
-        .bit            = 4,
-        .irq_flags      = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
-                          IRQF_SHARED,
-        .irq_handler    = psw_irq_handler,
-};
-
-static struct platform_device s4_switch_device = {
-        .name           = "push-switch",
-        .id             = 2,
-        .num_resources  = ARRAY_SIZE(psw_resources),
-        .resource       = psw_resources,
-        .dev            = {
-                .platform_data = &s4_platform_data,
-        },
-};
-
-static struct platform_device *psw_devices[] = {
-        &s2_switch_device, &s3_switch_device, &s4_switch_device,
-};
-
-static int __init psw_init(void)
-{
-        return platform_add_devices(psw_devices, ARRAY_SIZE(psw_devices));
-}
-module_init(psw_init);
diff --git a/arch/sh/boards/se/7206/io.c b/arch/sh/boards/se/7206/io.c
deleted file mode 100644
index 1308e618e044..000000000000
--- a/arch/sh/boards/se/7206/io.c
+++ /dev/null
@@ -1,104 +0,0 @@
-/* $Id: io.c,v 1.5 2004/02/22 23:08:43 kkojima Exp $
- *
- * linux/arch/sh/boards/se/7206/io.c
- *
- * Copyright (C) 2006 Yoshinori Sato
- *
- * I/O routine for Hitachi 7206 SolutionEngine.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <asm/io.h>
-#include <asm/se7206.h>
-
-
-static inline void delay(void)
-{
-        ctrl_inw(0x20000000);  /* P2 ROM Area */
-}
-
-/* MS7750 requires special versions of in*, out* routines, since
-   PC-like io ports are located at upper half byte of 16-bit word which
-   can be accessed only with 16-bit wide.  */
-
-static inline volatile __u16 *
-port2adr(unsigned int port)
-{
-        if (port >= 0x2000 && port < 0x2020)
-                return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
-        else if (port >= 0x300 && port < 0x310)
-                return (volatile __u16 *) (PA_SMSC + (port - 0x300));
-
-        return (volatile __u16 *)port;
-}
-
-unsigned char se7206_inb(unsigned long port)
-{
-        return (*port2adr(port)) & 0xff;
-}
-
-unsigned char se7206_inb_p(unsigned long port)
-{
-        unsigned long v;
-
-        v = (*port2adr(port)) & 0xff;
-        delay();
-        return v;
-}
-
-unsigned short se7206_inw(unsigned long port)
-{
-        return *port2adr(port);;
-}
-
-void se7206_outb(unsigned char value, unsigned long port)
-{
-        *(port2adr(port)) = value;
-}
-
-void se7206_outb_p(unsigned char value, unsigned long port)
-{
-        *(port2adr(port)) = value;
-        delay();
-}
-
-void se7206_outw(unsigned short value, unsigned long port)
-{
-        *port2adr(port) = value;
-}
-
-void se7206_insb(unsigned long port, void *addr, unsigned long count)
-{
-        volatile __u16 *p = port2adr(port);
-        __u8 *ap = addr;
-
-        while (count--)
-                *ap++ = *p;
-}
-
-void se7206_insw(unsigned long port, void *addr, unsigned long count)
-{
-        volatile __u16 *p = port2adr(port);
-        __u16 *ap = addr;
-        while (count--)
-                *ap++ = *p;
-}
-
-void se7206_outsb(unsigned long port, const void *addr, unsigned long count)
-{
-        volatile __u16 *p = port2adr(port);
-        const __u8 *ap = addr;
-
-        while (count--)
-                *p = *ap++;
-}
-
-void se7206_outsw(unsigned long port, const void *addr, unsigned long count)
-{
-        volatile __u16 *p = port2adr(port);
-        const __u16 *ap = addr;
-        while (count--)
-                *p = *ap++;
-}
diff --git a/arch/sh/boards/se/7206/irq.c b/arch/sh/boards/se/7206/irq.c
deleted file mode 100644
index 9d5bfc77d0de..000000000000
--- a/arch/sh/boards/se/7206/irq.c
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * linux/arch/sh/boards/se/7206/irq.c
- *
- * Copyright (C) 2005,2006 Yoshinori Sato
- *
- * Hitachi SolutionEngine Support.
- *
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/interrupt.h>
-#include <asm/se7206.h>
-
-#define INTSTS0 0x31800000
-#define INTSTS1 0x31800002
-#define INTMSK0 0x31800004
-#define INTMSK1 0x31800006
-#define INTSEL  0x31800008
-
-#define IRQ0_IRQ 64
-#define IRQ1_IRQ 65
-#define IRQ3_IRQ 67
-
-#define INTC_IPR01 0xfffe0818
-#define INTC_ICR1  0xfffe0802
-
-static void disable_se7206_irq(unsigned int irq)
-{
-        unsigned short val;
-        unsigned short mask = 0xffff ^ (0x0f << 4 * (3 - (IRQ0_IRQ - irq)));
-        unsigned short msk0,msk1;
-
-        /* Set the priority in IPR to 0 */
-        val = ctrl_inw(INTC_IPR01);
-        val &= mask;
-        ctrl_outw(val, INTC_IPR01);
-        /* FPGA mask set */
-        msk0 = ctrl_inw(INTMSK0);
-        msk1 = ctrl_inw(INTMSK1);
-
-        switch (irq) {
-        case IRQ0_IRQ:
-                msk0 |= 0x0010;
-                break;
-        case IRQ1_IRQ:
-                msk0 |= 0x000f;
-                break;
-        case IRQ3_IRQ:
-                msk0 |= 0x0f00;
-                msk1 |= 0x00ff;
-                break;
-        }
-        ctrl_outw(msk0, INTMSK0);
-        ctrl_outw(msk1, INTMSK1);
-}
-
-static void enable_se7206_irq(unsigned int irq)
-{
-        unsigned short val;
-        unsigned short value = (0x0001 << 4 * (3 - (IRQ0_IRQ - irq)));
-        unsigned short msk0,msk1;
-
-        /* Set priority in IPR back to original value */
-        val = ctrl_inw(INTC_IPR01);
-        val |= value;
-        ctrl_outw(val, INTC_IPR01);
-
-        /* FPGA mask reset */
-        msk0 = ctrl_inw(INTMSK0);
-        msk1 = ctrl_inw(INTMSK1);
-
-        switch (irq) {
-        case IRQ0_IRQ:
-                msk0 &= ~0x0010;
-                break;
-        case IRQ1_IRQ:
-                msk0 &= ~0x000f;
-                break;
-        case IRQ3_IRQ:
-                msk0 &= ~0x0f00;
-                msk1 &= ~0x00ff;
-                break;
-        }
-        ctrl_outw(msk0, INTMSK0);
-        ctrl_outw(msk1, INTMSK1);
-}
-
-static void eoi_se7206_irq(unsigned int irq)
-{
-        unsigned short sts0,sts1;
-
-        if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
-                enable_se7206_irq(irq);
-        /* FPGA isr clear */
-        sts0 = ctrl_inw(INTSTS0);
-        sts1 = ctrl_inw(INTSTS1);
-
-        switch (irq) {
-        case IRQ0_IRQ:
-                sts0 &= ~0x0010;
-                break;
-        case IRQ1_IRQ:
-                sts0 &= ~0x000f;
-                break;
-        case IRQ3_IRQ:
-                sts0 &= ~0x0f00;
-                sts1 &= ~0x00ff;
-                break;
-        }
-        ctrl_outw(sts0, INTSTS0);
-        ctrl_outw(sts1, INTSTS1);
-}
-
-static struct irq_chip se7206_irq_chip __read_mostly = {
-        .name           = "SE7206-FPGA",
-        .mask           = disable_se7206_irq,
-        .unmask         = enable_se7206_irq,
-        .mask_ack       = disable_se7206_irq,
-        .eoi            = eoi_se7206_irq,
-};
-
-static void make_se7206_irq(unsigned int irq)
-{
-        disable_irq_nosync(irq);
-        set_irq_chip_and_handler_name(irq, &se7206_irq_chip,
-                                      handle_level_irq, "level");
-        disable_se7206_irq(irq);
-}
-
-/*
- * Initialize IRQ setting
- */
-void __init init_se7206_IRQ(void)
-{
-        make_se7206_irq(IRQ0_IRQ); /* SMC91C111 */
-        make_se7206_irq(IRQ1_IRQ); /* ATA */
-        make_se7206_irq(IRQ3_IRQ); /* SLOT / PCM */
-        ctrl_outw(inw(INTC_ICR1) | 0x000b ,INTC_ICR1 ) ; /* ICR1 */
-
-        /* FPGA System register setup*/
-        ctrl_outw(0x0000,INTSTS0); /* Clear INTSTS0 */
-        ctrl_outw(0x0000,INTSTS1); /* Clear INTSTS1 */
-        /* IRQ0=LAN, IRQ1=ATA, IRQ3=SLT,PCM */
-        ctrl_outw(0x0001,INTSEL);
-}
diff --git a/arch/sh/boards/se/7206/setup.c b/arch/sh/boards/se/7206/setup.c
deleted file mode 100644
index 4fe84cc08406..000000000000
--- a/arch/sh/boards/se/7206/setup.c
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- *
- * linux/arch/sh/boards/se/7206/setup.c
- *
- * Copyright (C) 2006  Yoshinori Sato
- * Copyright (C) 2007 - 2008  Paul Mundt
- *
- * Hitachi 7206 SolutionEngine Support.
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/smc91x.h>
-#include <asm/se7206.h>
-#include <asm/io.h>
-#include <asm/machvec.h>
-#include <asm/heartbeat.h>
-
-static struct resource smc91x_resources[] = {
-        [0] = {
-                .name           = "smc91x-regs",
-                .start          = PA_SMSC + 0x300,
-                .end            = PA_SMSC + 0x300 + 0x020 - 1,
-                .flags          = IORESOURCE_MEM,
-        },
-        [1] = {
-                .start          = 64,
-                .end            = 64,
-                .flags          = IORESOURCE_IRQ,
-        },
-};
-
-static struct smc91x_platdata smc91x_info = {
-        .flags  = SMC91X_USE_16BIT,
-};
-
-static struct platform_device smc91x_device = {
-        .name           = "smc91x",
-        .id             = -1,
-        .dev            = {
-                .dma_mask               = NULL,
-                .coherent_dma_mask      = 0xffffffff,
-                .platform_data          = &smc91x_info,
-        },
-        .num_resources  = ARRAY_SIZE(smc91x_resources),
-        .resource       = smc91x_resources,
-};
-
-static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
-
-static struct heartbeat_data heartbeat_data = {
-        .bit_pos        = heartbeat_bit_pos,
-        .nr_bits        = ARRAY_SIZE(heartbeat_bit_pos),
-        .regsize        = 32,
-};
-
-static struct resource heartbeat_resources[] = {
-        [0] = {
-                .start  = PA_LED,
-                .end    = PA_LED,
-                .flags  = IORESOURCE_MEM,
-        },
-};
-
-static struct platform_device heartbeat_device = {
-        .name           = "heartbeat",
-        .id             = -1,
-        .dev    = {
-                .platform_data  = &heartbeat_data,
-        },
-        .num_resources  = ARRAY_SIZE(heartbeat_resources),
-        .resource       = heartbeat_resources,
-};
-
-static struct platform_device *se7206_devices[] __initdata = {
-        &smc91x_device,
-        &heartbeat_device,
-};
-
-static int __init se7206_devices_setup(void)
-{
-        return platform_add_devices(se7206_devices, ARRAY_SIZE(se7206_devices));
-}
-__initcall(se7206_devices_setup);
-
-/*
- * The Machine Vector
- */
-
-static struct sh_machine_vector mv_se __initmv = {
-        .mv_name                = "SolutionEngine",
-        .mv_nr_irqs             = 256,
-        .mv_inb                 = se7206_inb,
-        .mv_inw                 = se7206_inw,
-        .mv_outb                = se7206_outb,
-        .mv_outw                = se7206_outw,
-
-        .mv_inb_p               = se7206_inb_p,
-        .mv_inw_p               = se7206_inw,
-        .mv_outb_p              = se7206_outb_p,
-        .mv_outw_p              = se7206_outw,
-
-        .mv_insb                = se7206_insb,
-        .mv_insw                = se7206_insw,
-        .mv_outsb               = se7206_outsb,
-        .mv_outsw               = se7206_outsw,
-
-        .mv_init_irq            = init_se7206_IRQ,
-};
diff --git a/arch/sh/boards/se/7343/io.c b/arch/sh/boards/se/7343/io.c
deleted file mode 100644
index 3a6d11424938..000000000000
--- a/arch/sh/boards/se/7343/io.c
+++ /dev/null
@@ -1,273 +0,0 @@
-/*
- * arch/sh/boards/se/7343/io.c
- *
- * I/O routine for SH-Mobile3AS 7343 SolutionEngine.
- *
- */
-#include <linux/kernel.h>
-#include <asm/io.h>
-#include <asm/mach/se7343.h>
-
-#define badio(fn, a) panic("bad i/o operation %s for %08lx.", #fn, a)
-
-struct iop {
-        unsigned long start, end;
-        unsigned long base;
-        struct iop *(*check) (struct iop * p, unsigned long port);
-        unsigned char (*inb) (struct iop * p, unsigned long port);
-        unsigned short (*inw) (struct iop * p, unsigned long port);
-        void (*outb) (struct iop * p, unsigned char value, unsigned long port);
-        void (*outw) (struct iop * p, unsigned short value, unsigned long port);
-};
-
-struct iop *
-simple_check(struct iop *p, unsigned long port)
-{
-        static int count;
-
-        if (count < 100)
-                count++;
-
-        port &= 0xFFFF;
-
-        if ((p->start <= port) && (port <= p->end))
-                return p;
-        else
-                badio(check, port);
-}
-
-struct iop *
-ide_check(struct iop *p, unsigned long port)
-{
-        if (((0x1f0 <= port) && (port <= 0x1f7)) || (port == 0x3f7))
-                return p;
-        return NULL;
-}
-
-unsigned char
-simple_inb(struct iop *p, unsigned long port)
-{
-        return *(unsigned char *) (p->base + port);
-}
-
-unsigned short
-simple_inw(struct iop *p, unsigned long port)
-{
-        return *(unsigned short *) (p->base + port);
-}
-
-void
-simple_outb(struct iop *p, unsigned char value, unsigned long port)
-{
-        *(unsigned char *) (p->base + port) = value;
-}
-
-void
-simple_outw(struct iop *p, unsigned short value, unsigned long port)
-{
-        *(unsigned short *) (p->base + port) = value;
-}
-
-unsigned char
-pcc_inb(struct iop *p, unsigned long port)
-{
-        unsigned long addr = p->base + port + 0x40000;
-        unsigned long v;
-
-        if (port & 1)
-                addr += 0x00400000;
-        v = *(volatile unsigned char *) addr;
-        return v;
-}
-
-void
-pcc_outb(struct iop *p, unsigned char value, unsigned long port)
-{
-        unsigned long addr = p->base + port + 0x40000;
-
-        if (port & 1)
-                addr += 0x00400000;
-        *(volatile unsigned char *) addr = value;
-}
-
-unsigned char
-bad_inb(struct iop *p, unsigned long port)
-{
-        badio(inb, port);
-}
-
-void
-bad_outb(struct iop *p, unsigned char value, unsigned long port)
-{
-        badio(inw, port);
-}
-
-#ifdef CONFIG_SMC91X
-/* MSTLANEX01 LAN at 0xb400:0000 */
-static struct iop laniop = {
-        .start = 0x00,
-        .end = 0x0F,
-        .base = 0x04000000,
-        .check = simple_check,
-        .inb = simple_inb,
-        .inw = simple_inw,
-        .outb = simple_outb,
-        .outw = simple_outw,
-};
-#endif
-
-#ifdef CONFIG_NE2000
-/* NE2000 pc card NIC */
-static struct iop neiop = {
-        .start = 0x280,
-        .end = 0x29f,
-        .base = 0xb0600000 + 0x80,      /* soft 0x280 -> hard 0x300 */
-        .check = simple_check,
-        .inb = pcc_inb,
-        .inw = simple_inw,
-        .outb = pcc_outb,
-        .outw = simple_outw,
-};
-#endif
-
-#ifdef CONFIG_IDE
-/* CF in CF slot */
-static struct iop cfiop = {
-        .base = 0xb0600000,
-        .check = ide_check,
-        .inb = pcc_inb,
-        .inw = simple_inw,
-        .outb = pcc_outb,
-        .outw = simple_outw,
-};
-#endif
-
-static __inline__ struct iop *
-port2iop(unsigned long port)
-{
-        if (0) ;
-#if defined(CONFIG_SMC91X)
-        else if (laniop.check(&laniop, port))
-                return &laniop;
-#endif
-#if defined(CONFIG_NE2000)
-        else if (neiop.check(&neiop, port))
-                return &neiop;
-#endif
-#if defined(CONFIG_IDE)
-        else if (cfiop.check(&cfiop, port))
-                return &cfiop;
-#endif
-        else
-                return NULL;
-}
-
-static inline void
-delay(void)
-{
-        ctrl_inw(0xac000000);
-        ctrl_inw(0xac000000);
-}
-
-unsigned char
-sh7343se_inb(unsigned long port)
-{
-        struct iop *p = port2iop(port);
-        return (p->inb) (p, port);
-}
-
-unsigned char
-sh7343se_inb_p(unsigned long port)
-{
-        unsigned char v = sh7343se_inb(port);
-        delay();
-        return v;
-}
-
-unsigned short
-sh7343se_inw(unsigned long port)
-{
-        struct iop *p = port2iop(port);
-        return (p->inw) (p, port);
-}
-
-unsigned int
-sh7343se_inl(unsigned long port)
-{
-        badio(inl, port);
-}
-
-void
-sh7343se_outb(unsigned char value, unsigned long port)
-{
-        struct iop *p = port2iop(port);
-        (p->outb) (p, value, port);
-}
-
-void
-sh7343se_outb_p(unsigned char value, unsigned long port)
-{
-        sh7343se_outb(value, port);
-        delay();
-}
-
-void
-sh7343se_outw(unsigned short value, unsigned long port)
-{
-        struct iop *p = port2iop(port);
-        (p->outw) (p, value, port);
-}
-
-void
-sh7343se_outl(unsigned int value, unsigned long port)
-{
-        badio(outl, port);
-}
-
-void
-sh7343se_insb(unsigned long port, void *addr, unsigned long count)
-{
-        unsigned char *a = addr;
-        struct iop *p = port2iop(port);
-        while (count--)
-                *a++ = (p->inb) (p, port);
-}
-
-void
-sh7343se_insw(unsigned long port, void *addr, unsigned long count)
-{
-        unsigned short *a = addr;
-        struct iop *p = port2iop(port);
-        while (count--)
-                *a++ = (p->inw) (p, port);
-}
-
-void
-sh7343se_insl(unsigned long port, void *addr, unsigned long count)
-{
-        badio(insl, port);
-}
-
-void
-sh7343se_outsb(unsigned long port, const void *addr, unsigned long count)
-{
-        unsigned char *a = (unsigned char *) addr;
-        struct iop *p = port2iop(port);
-        while (count--)
-                (p->outb) (p, *a++, port);
-}
-
-void
-sh7343se_outsw(unsigned long port, const void *addr, unsigned long count)
-{
-        unsigned short *a = (unsigned short *) addr;
-        struct iop *p = port2iop(port);
-        while (count--)
-                (p->outw) (p, *a++, port);
-}
-
-void
-sh7343se_outsl(unsigned long port, const void *addr, unsigned long count)
-{
-        badio(outsw, port);
-}
diff --git a/arch/sh/boards/se/7343/irq.c b/arch/sh/boards/se/7343/irq.c
deleted file mode 100644
index 763f6deba814..000000000000
--- a/arch/sh/boards/se/7343/irq.c
+++ /dev/null
@@ -1,202 +0,0 @@
-/*
- * arch/sh/boards/se/7343/irq.c
- *
- */
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/mach/se7343.h>
-
-static void
-disable_intreq_irq(unsigned int irq)
-{
-        int bit = irq - OFFCHIP_IRQ_BASE;
-        u16 val;
-
-        val = ctrl_inw(PA_CPLD_IMSK);
-        val |= 1 << bit;
-        ctrl_outw(val, PA_CPLD_IMSK);
-}
-
-static void
-enable_intreq_irq(unsigned int irq)
-{
-        int bit = irq - OFFCHIP_IRQ_BASE;
-        u16 val;
-
-        val = ctrl_inw(PA_CPLD_IMSK);
-        val &= ~(1 << bit);
-        ctrl_outw(val, PA_CPLD_IMSK);
-}
-
-static void
-mask_and_ack_intreq_irq(unsigned int irq)
-{
-        disable_intreq_irq(irq);
-}
-
-static unsigned int
-startup_intreq_irq(unsigned int irq)
-{
-        enable_intreq_irq(irq);
-        return 0;
-}
-
-static void
-shutdown_intreq_irq(unsigned int irq)
-{
-        disable_intreq_irq(irq);
-}
-
-static void
-end_intreq_irq(unsigned int irq)
-{
-        if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
-                enable_intreq_irq(irq);
-}
-
-static struct hw_interrupt_type intreq_irq_type = {
-        .typename = "FPGA-IRQ",
-        .startup = startup_intreq_irq,
-        .shutdown = shutdown_intreq_irq,
-        .enable = enable_intreq_irq,
-        .disable = disable_intreq_irq,
-        .ack = mask_and_ack_intreq_irq,
-        .end = end_intreq_irq
-};
-
-static void
-make_intreq_irq(unsigned int irq)
-{
-        disable_irq_nosync(irq);
-        irq_desc[irq].chip = &intreq_irq_type;
-        disable_intreq_irq(irq);
-}
-
-int
-shmse_irq_demux(int irq)
-{
-        int bit;
-        volatile u16 val;
-
-        if (irq == IRQ5_IRQ) {
-                /* Read status Register */
-                val = ctrl_inw(PA_CPLD_ST);
-                bit = ffs(val);
-                if (bit != 0)
-                        return OFFCHIP_IRQ_BASE + bit - 1;
-        }
-        return irq;
-}
-
-/* IRQ5 is multiplexed between the following sources:
- * 1. PC Card socket
- * 2. Extension slot
- * 3. USB Controller
- * 4. Serial Controller
- *
- * We configure IRQ5 as a cascade IRQ.
- */
-static struct irqaction irq5 = {
-        .handler = no_action,
-        .mask = CPU_MASK_NONE,
-        .name = "IRQ5-cascade",
-};
-
-static struct ipr_data se7343_irq5_ipr_map[] = {
-        { IRQ5_IRQ, IRQ5_IPR_ADDR+2, IRQ5_IPR_POS, IRQ5_PRIORITY },
-};
-static struct ipr_data se7343_siof0_vpu_ipr_map[] = {
-        { SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY },
-        { VPU_IRQ, VPU_IPR_ADDR, VPU_IPR_POS, 8 },
-};
-static struct ipr_data se7343_other_ipr_map[] = {
-        { DMTE0_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY },
-        { DMTE1_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY },
-        { DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY },
-        { DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY },
-        { DMTE4_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY },
-        { DMTE5_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY },
-
-        /* I2C block */
-        { IIC0_ALI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY },
-        { IIC0_TACKI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY },
-        { IIC0_WAITI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY },
-        { IIC0_DTEI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY },
-
-        { IIC1_ALI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY },
-        { IIC1_TACKI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY },
-        { IIC1_WAITI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY },
-        { IIC1_DTEI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY },
-
-        /* SIOF */
-        { SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY },
-
-        /* SIU */
-        { SIU_IRQ, SIU_IPR_ADDR, SIU_IPR_POS, SIU_PRIORITY },
-
-        /* VIO interrupt */
-        { CEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY },
-        { BEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY },
-        { VEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY },
-
-        /*MFI interrupt*/
-
-        { MFI_IRQ, MFI_IPR_ADDR, MFI_IPR_POS, MFI_PRIORITY },
-
-        /* LCD controller */
-        { LCDC_IRQ, LCDC_IPR_ADDR, LCDC_IPR_POS, LCDC_PRIORITY },
-};
-
-/*
- * Initialize IRQ setting
- */
-void __init
-init_7343se_IRQ(void)
-{
-        /* Setup Multiplexed interrupts */
-        ctrl_outw(8, PA_CPLD_MODESET);  /* Set all CPLD interrupts to active
-                                         * low.
-                                         */
-        /* Mask all CPLD controller interrupts */
-        ctrl_outw(0x0fff, PA_CPLD_IMSK);
-
-        /* PC Card interrupts */
-        make_intreq_irq(PC_IRQ0);
-        make_intreq_irq(PC_IRQ1);
-        make_intreq_irq(PC_IRQ2);
-        make_intreq_irq(PC_IRQ3);
-
-        /* Extension Slot Interrupts */
-        make_intreq_irq(EXT_IRQ0);
-        make_intreq_irq(EXT_IRQ1);
-        make_intreq_irq(EXT_IRQ2);
-        make_intreq_irq(EXT_IRQ3);
-
-        /* USB Controller interrupts */
-        make_intreq_irq(USB_IRQ0);
-        make_intreq_irq(USB_IRQ1);
-
-        /* Serial Controller interrupts */
-        make_intreq_irq(UART_IRQ0);
-        make_intreq_irq(UART_IRQ1);
-
-        /* Setup all external interrupts to be active low */
-        ctrl_outw(0xaaaa, INTC_ICR1);
-
-        make_ipr_irq(se7343_irq5_ipr_map, ARRAY_SIZE(se7343_irq5_ipr_map));
-
-        setup_irq(IRQ5_IRQ, &irq5);
-        /* Set port control to use IRQ5 */
-        *(u16 *)0xA4050108 &= ~0xc;
-
-        make_ipr_irq(se7343_siof0_vpu_ipr_map, ARRAY_SIZE(se7343_siof0_vpu_ipr_map));
-
-        ctrl_outb(0x0f, INTC_IMCR5);    /* enable SCIF IRQ */
-
-        make_ipr_irq(se7343_other_ipr_map, ARRAY_SIZE(se7343_other_ipr_map));
-
-        ctrl_outw(0x2000, PA_MRSHPC + 0x0c);    /* mrshpc irq enable */
-}
diff --git a/arch/sh/boards/se/7343/setup.c b/arch/sh/boards/se/7343/setup.c
deleted file mode 100644
index c9431b3a051b..000000000000
--- a/arch/sh/boards/se/7343/setup.c
+++ /dev/null
@@ -1,94 +0,0 @@
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <asm/machvec.h>
-#include <asm/mach/se7343.h>
-#include <asm/irq.h>
-
-void init_7343se_IRQ(void);
-
-static struct resource smc91x_resources[] = {
-        [0] = {
-                .start  = 0x10000000,
-                .end    = 0x1000000F,
-                .flags  = IORESOURCE_MEM,
-        },
-        [1] = {
-                /*
-                 * shared with other devices via externel
-                 * interrupt controller in FPGA...
-                 */
-                .start  = EXT_IRQ2,
-                .end    = EXT_IRQ2,
-                .flags  = IORESOURCE_IRQ,
-        },
-};
-
-static struct platform_device smc91x_device = {
-        .name           = "smc91x",
-        .id             = 0,
-        .num_resources  = ARRAY_SIZE(smc91x_resources),
-        .resource       = smc91x_resources,
-};
-
-static struct resource heartbeat_resources[] = {
-        [0] = {
-                .start  = PA_LED,
-                .end    = PA_LED,
-                .flags  = IORESOURCE_MEM,
-        },
-};
-
-static struct platform_device heartbeat_device = {
-        .name           = "heartbeat",
-        .id             = -1,
-        .num_resources  = ARRAY_SIZE(heartbeat_resources),
-        .resource       = heartbeat_resources,
-};
-
-static struct platform_device *sh7343se_platform_devices[] __initdata = {
-        &smc91x_device,
-        &heartbeat_device,
-};
-
-static int __init sh7343se_devices_setup(void)
-{
-        return platform_add_devices(sh7343se_platform_devices,
-                                    ARRAY_SIZE(sh7343se_platform_devices));
-}
-
-static void __init sh7343se_setup(char **cmdline_p)
-{
-        device_initcall(sh7343se_devices_setup);
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_7343se __initmv = {
-        .mv_name = "SolutionEngine 7343",
-        .mv_setup = sh7343se_setup,
-        .mv_nr_irqs = 108,
-        .mv_inb = sh7343se_inb,
-        .mv_inw = sh7343se_inw,
-        .mv_inl = sh7343se_inl,
-        .mv_outb = sh7343se_outb,
-        .mv_outw = sh7343se_outw,
-        .mv_outl = sh7343se_outl,
-
-        .mv_inb_p = sh7343se_inb_p,
-        .mv_inw_p = sh7343se_inw,
-        .mv_inl_p = sh7343se_inl,
-        .mv_outb_p = sh7343se_outb_p,
-        .mv_outw_p = sh7343se_outw,
-        .mv_outl_p = sh7343se_outl,
-
-        .mv_insb = sh7343se_insb,
-        .mv_insw = sh7343se_insw,
-        .mv_insl = sh7343se_insl,
-        .mv_outsb = sh7343se_outsb,
-        .mv_outsw = sh7343se_outsw,
-        .mv_outsl = sh7343se_outsl,
-
-        .mv_init_irq = init_7343se_IRQ,
-        .mv_irq_demux = shmse_irq_demux,
-};
diff --git a/arch/sh/boards/se/7619/Makefile b/arch/sh/boards/se/7619/Makefile
deleted file mode 100644
index d21775c28cda..000000000000
--- a/arch/sh/boards/se/7619/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for the 7619 SolutionEngine specific parts of the kernel
-#
-
-obj-y    := setup.o
diff --git a/arch/sh/boards/se/770x/io.c b/arch/sh/boards/se/770x/io.c
deleted file mode 100644
index c4550473d4c3..000000000000
--- a/arch/sh/boards/se/770x/io.c
+++ /dev/null
@@ -1,187 +0,0 @@
-/* $Id: io.c,v 1.7 2006/02/05 21:55:29 lethal Exp $
- *
- * linux/arch/sh/kernel/io_se.c
- *
- * Copyright (C) 2000  Kazumoto Kojima
- *
- * I/O routine for Hitachi SolutionEngine.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <asm/io.h>
-#include <asm/se.h>
-
-/* SH pcmcia io window base, start and end.  */
-int sh_pcic_io_wbase = 0xb8400000;
-int sh_pcic_io_start;
-int sh_pcic_io_stop;
-int sh_pcic_io_type;
-int sh_pcic_io_dummy;
-
-/* MS7750 requires special versions of in*, out* routines, since
-   PC-like io ports are located at upper half byte of 16-bit word which
-   can be accessed only with 16-bit wide.  */
-
-static inline volatile __u16 *
-port2adr(unsigned int port)
-{
-        if (port & 0xff000000)
-                return ( volatile __u16 *) port;
-        if (port >= 0x2000)
-                return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
-        else if (port >= 0x1000)
-                return (volatile __u16 *) (PA_83902 + (port << 1));
-        else if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop)
-                return (volatile __u16 *) (sh_pcic_io_wbase + (port &~ 1));
-        else
-                return (volatile __u16 *) (PA_SUPERIO + (port << 1));
-}
-
-static inline int
-shifted_port(unsigned long port)
-{
-        /* For IDE registers, value is not shifted */
-        if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6)
-                return 0;
-        else
-                return 1;
-}
-
-unsigned char se_inb(unsigned long port)
-{
-        if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop)
-                return *(__u8 *) (sh_pcic_io_wbase + 0x40000 + port); 
-        else if (shifted_port(port))
-                return (*port2adr(port) >> 8); 
-        else
-                return (*port2adr(port))&0xff; 
-}
-
-unsigned char se_inb_p(unsigned long port)
-{
-        unsigned long v;
-
-        if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop)
-                v = *(__u8 *) (sh_pcic_io_wbase + 0x40000 + port); 
-        else if (shifted_port(port))
-                v = (*port2adr(port) >> 8); 
-        else
-                v = (*port2adr(port))&0xff; 
-        ctrl_delay();
-        return v;
-}
-
-unsigned short se_inw(unsigned long port)
-{
-        if (port >= 0x2000 ||
-            (sh_pcic_io_start <= port && port <= sh_pcic_io_stop))
-                return *port2adr(port);
-        else
-                maybebadio(port);
-        return 0;
-}
-
-unsigned int se_inl(unsigned long port)
-{
-        maybebadio(port);
-        return 0;
-}
-
-void se_outb(unsigned char value, unsigned long port)
-{
-        if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop)
-                *(__u8 *)(sh_pcic_io_wbase + port) = value; 
-        else if (shifted_port(port))
-                *(port2adr(port)) = value << 8;
-        else
-                *(port2adr(port)) = value;
-}
-
-void se_outb_p(unsigned char value, unsigned long port)
-{
-        if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop)
-                *(__u8 *)(sh_pcic_io_wbase + port) = value; 
-        else if (shifted_port(port))
-                *(port2adr(port)) = value << 8;
-        else
-                *(port2adr(port)) = value;
-        ctrl_delay();
-}
-
-void se_outw(unsigned short value, unsigned long port)
-{
-        if (port >= 0x2000 ||
-            (sh_pcic_io_start <= port && port <= sh_pcic_io_stop))
-                *port2adr(port) = value;
-        else
-                maybebadio(port);
-}
-
-void se_outl(unsigned int value, unsigned long port)
-{
-        maybebadio(port);
-}
-
-void se_insb(unsigned long port, void *addr, unsigned long count)
-{
-        volatile __u16 *p = port2adr(port);
-        __u8 *ap = addr;
-
-        if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop) {
-                volatile __u8 *bp = (__u8 *) (sh_pcic_io_wbase + 0x40000 + port); 
-                while (count--)
-                        *ap++ = *bp;
-        } else if (shifted_port(port)) {
-                while (count--)
-                        *ap++ = *p >> 8;
-        } else {
-                while (count--)
-                        *ap++ = *p;
-        }
-}
-
-void se_insw(unsigned long port, void *addr, unsigned long count)
-{
-        volatile __u16 *p = port2adr(port);
-        __u16 *ap = addr;
-        while (count--)
-                *ap++ = *p;
-}
-
-void se_insl(unsigned long port, void *addr, unsigned long count)
-{
-        maybebadio(port);
-}
-
-void se_outsb(unsigned long port, const void *addr, unsigned long count)
-{
-        volatile __u16 *p = port2adr(port);
-        const __u8 *ap = addr;
-
-        if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop) {
-                volatile __u8 *bp = (__u8 *) (sh_pcic_io_wbase + port); 
-                while (count--)
-                        *bp = *ap++;
-        } else if (shifted_port(port)) {
-                while (count--)
-                        *p = *ap++ << 8;
-        } else {
-                while (count--)
-                        *p = *ap++;
-        }
-}
-
-void se_outsw(unsigned long port, const void *addr, unsigned long count)
-{
-        volatile __u16 *p = port2adr(port);
-        const __u16 *ap = addr;
-        while (count--)
-                *p = *ap++;
-}
-
-void se_outsl(unsigned long port, const void *addr, unsigned long count)
-{
-        maybebadio(port);
-}
diff --git a/arch/sh/boards/se/770x/irq.c b/arch/sh/boards/se/770x/irq.c
deleted file mode 100644
index cdb0807928a5..000000000000
--- a/arch/sh/boards/se/770x/irq.c
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- * linux/arch/sh/boards/se/770x/irq.c
- *
- * Copyright (C) 2000  Kazumoto Kojima
- * Copyright (C) 2006  Nobuhiro Iwamatsu
- *
- * Hitachi SolutionEngine Support.
- *
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/se.h>
-
-static struct ipr_data ipr_irq_table[] = {
-        /*
-        * Super I/O (Just mimic PC):
-        *  1: keyboard
-        *  3: serial 0
-        *  4: serial 1
-        *  5: printer
-        *  6: floppy
-        *  8: rtc
-        * 12: mouse
-        * 14: ide0
-        */
-#if defined(CONFIG_CPU_SUBTYPE_SH7705)
-        /* This is default value */
-        { 13, 0, 8,  0x0f-13, },
-        { 5 , 0, 4,  0x0f- 5, },
-        { 10, 1, 0,  0x0f-10, },
-        { 7 , 2, 4,  0x0f- 7, },
-        { 3 , 2, 0,  0x0f- 3, },
-        { 1 , 3, 12, 0x0f- 1, },
-        { 12, 3, 4,  0x0f-12, }, /* LAN */
-        { 2 , 4, 8,  0x0f- 2, }, /* PCIRQ2 */
-        { 6 , 4, 4,  0x0f- 6, }, /* PCIRQ1 */
-        { 14, 4, 0,  0x0f-14, }, /* PCIRQ0 */
-        { 0 , 5, 12, 0x0f   , }, 
-        { 4 , 5, 4,  0x0f- 4, },
-        { 8 , 6, 12, 0x0f- 8, },
-        { 9 , 6, 8,  0x0f- 9, },
-        { 11, 6, 4,  0x0f-11, },
-#else
-        { 14, 0,  8, 0x0f-14, },
-        { 12, 0,  4, 0x0f-12, },
-        {  8, 1,  4, 0x0f- 8, },
-        {  6, 2, 12, 0x0f- 6, },
-        {  5, 2,  8, 0x0f- 5, },
-        {  4, 2,  4, 0x0f- 4, },
-        {  3, 2,  0, 0x0f- 3, },
-        {  1, 3, 12, 0x0f- 1, },
-#if defined(CONFIG_STNIC)
-        /* ST NIC */
-        { 10, 3,  4, 0x0f-10, },        /* LAN */
-#endif
-        /* MRSHPC IRQs setting */
-        {  0, 4, 12, 0x0f- 0, },        /* PCIRQ3 */
-        { 11, 4,  8, 0x0f-11, },        /* PCIRQ2 */
-        {  9, 4,  4, 0x0f- 9, },        /* PCIRQ1 */
-        {  7, 4,  0, 0x0f- 7, },        /* PCIRQ0 */
-        /* #2, #13 are allocated for SLOT IRQ #1 and #2 (for now) */
-        /* NOTE: #2 and #13 are not used on PC */
-        { 13, 6,  4, 0x0f-13, },        /* SLOTIRQ2 */
-        {  2, 6,  0, 0x0f- 2, },        /* SLOTIRQ1 */
-#endif
-};
-
-static unsigned long ipr_offsets[] = {
-        BCR_ILCRA,
-        BCR_ILCRB,
-        BCR_ILCRC,
-        BCR_ILCRD,
-        BCR_ILCRE,
-        BCR_ILCRF,
-        BCR_ILCRG,
-};
-
-static struct ipr_desc ipr_irq_desc = {
-        .ipr_offsets    = ipr_offsets,
-        .nr_offsets     = ARRAY_SIZE(ipr_offsets),
-
-        .ipr_data       = ipr_irq_table,
-        .nr_irqs        = ARRAY_SIZE(ipr_irq_table),
-        .chip = {
-                .name   = "IPR-se770x",
-        },
-};
-
-/*
- * Initialize IRQ setting
- */
-void __init init_se_IRQ(void)
-{
-        /* Disable all interrupts */
-        ctrl_outw(0, BCR_ILCRA);
-        ctrl_outw(0, BCR_ILCRB);
-        ctrl_outw(0, BCR_ILCRC);
-        ctrl_outw(0, BCR_ILCRD);
-        ctrl_outw(0, BCR_ILCRE);
-        ctrl_outw(0, BCR_ILCRF);
-        ctrl_outw(0, BCR_ILCRG);
-
-        register_ipr_controller(&ipr_irq_desc);
-}
diff --git a/arch/sh/boards/se/770x/setup.c b/arch/sh/boards/se/770x/setup.c
deleted file mode 100644
index 318bc8a3969c..000000000000
--- a/arch/sh/boards/se/770x/setup.c
+++ /dev/null
@@ -1,169 +0,0 @@
-/*
- * linux/arch/sh/boards/se/770x/setup.c
- *
- * Copyright (C) 2000  Kazumoto Kojima
- *
- * Hitachi SolutionEngine Support.
- *
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <asm/machvec.h>
-#include <asm/se.h>
-#include <asm/io.h>
-#include <asm/smc37c93x.h>
-#include <asm/heartbeat.h>
-
-void init_se_IRQ(void);
-
-/*
- * Configure the Super I/O chip
- */
-static void __init smsc_config(int index, int data)
-{
-        outb_p(index, INDEX_PORT);
-        outb_p(data, DATA_PORT);
-}
-
-/* XXX: Another candidate for a more generic cchip machine vector */
-static void __init smsc_setup(char **cmdline_p)
-{
-        outb_p(CONFIG_ENTER, CONFIG_PORT);
-        outb_p(CONFIG_ENTER, CONFIG_PORT);
-
-        /* FDC */
-        smsc_config(CURRENT_LDN_INDEX, LDN_FDC);
-        smsc_config(ACTIVATE_INDEX, 0x01);
-        smsc_config(IRQ_SELECT_INDEX, 6); /* IRQ6 */
-
-        /* AUXIO (GPIO): to use IDE1 */
-        smsc_config(CURRENT_LDN_INDEX, LDN_AUXIO);
-        smsc_config(GPIO46_INDEX, 0x00); /* nIOROP */
-        smsc_config(GPIO47_INDEX, 0x00); /* nIOWOP */
-
-        /* COM1 */
-        smsc_config(CURRENT_LDN_INDEX, LDN_COM1);
-        smsc_config(ACTIVATE_INDEX, 0x01);
-        smsc_config(IO_BASE_HI_INDEX, 0x03);
-        smsc_config(IO_BASE_LO_INDEX, 0xf8);
-        smsc_config(IRQ_SELECT_INDEX, 4); /* IRQ4 */
-
-        /* COM2 */
-        smsc_config(CURRENT_LDN_INDEX, LDN_COM2);
-        smsc_config(ACTIVATE_INDEX, 0x01);
-        smsc_config(IO_BASE_HI_INDEX, 0x02);
-        smsc_config(IO_BASE_LO_INDEX, 0xf8);
-        smsc_config(IRQ_SELECT_INDEX, 3); /* IRQ3 */
-
-        /* RTC */
-        smsc_config(CURRENT_LDN_INDEX, LDN_RTC);
-        smsc_config(ACTIVATE_INDEX, 0x01);
-        smsc_config(IRQ_SELECT_INDEX, 8); /* IRQ8 */
-
-        /* XXX: PARPORT, KBD, and MOUSE will come here... */
-        outb_p(CONFIG_EXIT, CONFIG_PORT);
-}
-
-
-static struct resource cf_ide_resources[] = {
-        [0] = {
-                .start  = PA_MRSHPC_IO + 0x1f0,
-                .end    = PA_MRSHPC_IO + 0x1f0 + 8,
-                .flags  = IORESOURCE_MEM,
-        },
-        [1] = {
-                .start  = PA_MRSHPC_IO + 0x1f0 + 0x206,
-                .end    = PA_MRSHPC_IO + 0x1f0 +8 + 0x206 + 8,
-                .flags  = IORESOURCE_MEM,
-        },
-        [2] = {
-                .start  = IRQ_CFCARD,
-                .flags  = IORESOURCE_IRQ,
-        },
-};
-
-static struct platform_device cf_ide_device  = {
-        .name           = "pata_platform",
-        .id             = -1,
-        .num_resources  = ARRAY_SIZE(cf_ide_resources),
-        .resource       = cf_ide_resources,
-};
-
-static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
-
-static struct heartbeat_data heartbeat_data = {
-        .bit_pos        = heartbeat_bit_pos,
-        .nr_bits        = ARRAY_SIZE(heartbeat_bit_pos),
-        .regsize        = 16,
-};
-
-static struct resource heartbeat_resources[] = {
-        [0] = {
-                .start  = PA_LED,
-                .end    = PA_LED,
-                .flags  = IORESOURCE_MEM,
-        },
-};
-
-static struct platform_device heartbeat_device = {
-        .name           = "heartbeat",
-        .id             = -1,
-        .dev    = {
-                .platform_data  = &heartbeat_data,
-        },
-        .num_resources  = ARRAY_SIZE(heartbeat_resources),
-        .resource       = heartbeat_resources,
-};
-
-static struct platform_device *se_devices[] __initdata = {
-        &heartbeat_device,
-        &cf_ide_device,
-};
-
-static int __init se_devices_setup(void)
-{
-        return platform_add_devices(se_devices, ARRAY_SIZE(se_devices));
-}
-device_initcall(se_devices_setup);
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_se __initmv = {
-        .mv_name                = "SolutionEngine",
-        .mv_setup               = smsc_setup,
-#if defined(CONFIG_CPU_SH4)
-        .mv_nr_irqs             = 48,
-#elif defined(CONFIG_CPU_SUBTYPE_SH7708)
-        .mv_nr_irqs             = 32,
-#elif defined(CONFIG_CPU_SUBTYPE_SH7709)
-        .mv_nr_irqs             = 61,
-#elif defined(CONFIG_CPU_SUBTYPE_SH7705)
-        .mv_nr_irqs             = 86,
-#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
-        .mv_nr_irqs             = 104,
-#endif
-
-        .mv_inb                 = se_inb,
-        .mv_inw                 = se_inw,
-        .mv_inl                 = se_inl,
-        .mv_outb                = se_outb,
-        .mv_outw                = se_outw,
-        .mv_outl                = se_outl,
-
-        .mv_inb_p               = se_inb_p,
-        .mv_inw_p               = se_inw,
-        .mv_inl_p               = se_inl,
-        .mv_outb_p              = se_outb_p,
-        .mv_outw_p              = se_outw,
-        .mv_outl_p              = se_outl,
-
-        .mv_insb                = se_insb,
-        .mv_insw                = se_insw,
-        .mv_insl                = se_insl,
-        .mv_outsb               = se_outsb,
-        .mv_outsw               = se_outsw,
-        .mv_outsl               = se_outsl,
-
-        .mv_init_irq            = init_se_IRQ,
-};
diff --git a/arch/sh/boards/se/7721/irq.c b/arch/sh/boards/se/7721/irq.c
deleted file mode 100644
index c4fdd622bf8b..000000000000
--- a/arch/sh/boards/se/7721/irq.c
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * linux/arch/sh/boards/se/7721/irq.c
- *
- * Copyright (C) 2008  Renesas Solutions Corp.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <asm/se7721.h>
-
-enum {
-        UNUSED = 0,
-
-        /* board specific interrupt sources */
-        MRSHPC,
-};
-
-static struct intc_vect vectors[] __initdata = {
-        INTC_IRQ(MRSHPC, MRSHPC_IRQ0),
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
-        { FPGA_ILSR6, 0, 8, 4, /* IRLMSK */
-          { 0, MRSHPC } },
-};
-
-static DECLARE_INTC_DESC(intc_desc, "SE7721", vectors,
-                         NULL, NULL, prio_registers, NULL);
-
-/*
- * Initialize IRQ setting
- */
-void __init init_se7721_IRQ(void)
-{
-        /* PPCR */
-        ctrl_outw(ctrl_inw(0xa4050118) & ~0x00ff, 0xa4050118);
-
-        register_intc_controller(&intc_desc);
-        intc_set_priority(MRSHPC_IRQ0, 0xf - MRSHPC_IRQ0);
-}
diff --git a/arch/sh/boards/se/7721/setup.c b/arch/sh/boards/se/7721/setup.c
deleted file mode 100644
index 1be3e92752f7..000000000000
--- a/arch/sh/boards/se/7721/setup.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * linux/arch/sh/boards/se/7721/setup.c
- *
- * Copyright (C) 2008 Renesas Solutions Corp.
- *
- * Hitachi UL SolutionEngine 7721 Support.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <asm/machvec.h>
-#include <asm/se7721.h>
-#include <asm/io.h>
-#include <asm/heartbeat.h>
-
-static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
-
-static struct heartbeat_data heartbeat_data = {
-        .bit_pos        = heartbeat_bit_pos,
-        .nr_bits        = ARRAY_SIZE(heartbeat_bit_pos),
-        .regsize        = 16,
-};
-
-static struct resource heartbeat_resources[] = {
-        [0] = {
-                .start  = PA_LED,
-                .end    = PA_LED,
-                .flags  = IORESOURCE_MEM,
-        },
-};
-
-static struct platform_device heartbeat_device = {
-        .name           = "heartbeat",
-        .id             = -1,
-        .dev    = {
-                .platform_data  = &heartbeat_data,
-        },
-        .num_resources  = ARRAY_SIZE(heartbeat_resources),
-        .resource       = heartbeat_resources,
-};
-
-static struct resource cf_ide_resources[] = {
-        [0] = {
-                .start  = PA_MRSHPC_IO + 0x1f0,
-                .end    = PA_MRSHPC_IO + 0x1f0 + 8 ,
-                .flags  = IORESOURCE_IO,
-        },
-        [1] = {
-                .start  = PA_MRSHPC_IO + 0x1f0 + 0x206,
-                .end    = PA_MRSHPC_IO + 0x1f0 + 8 + 0x206 + 8,
-                .flags  = IORESOURCE_IO,
-        },
-        [2] = {
-                .start  = MRSHPC_IRQ0,
-                .flags  = IORESOURCE_IRQ,
-        },
-};
-
-static struct platform_device cf_ide_device = {
-        .name           = "pata_platform",
-        .id             = -1,
-        .num_resources  = ARRAY_SIZE(cf_ide_resources),
-        .resource       = cf_ide_resources,
-};
-
-static struct platform_device *se7721_devices[] __initdata = {
-        &cf_ide_device,
-        &heartbeat_device
-};
-
-static int __init se7721_devices_setup(void)
-{
-        return platform_add_devices(se7721_devices,
-                ARRAY_SIZE(se7721_devices));
-}
-device_initcall(se7721_devices_setup);
-
-static void __init se7721_setup(char **cmdline_p)
-{
-        /* for USB */
-        ctrl_outw(0x0000, 0xA405010C);  /* PGCR */
-        ctrl_outw(0x0000, 0xA405010E);  /* PHCR */
-        ctrl_outw(0x00AA, 0xA4050118);  /* PPCR */
-        ctrl_outw(0x0000, 0xA4050124);  /* PSELA */
-}
-
-/*
- * The Machine Vector
- */
-struct sh_machine_vector mv_se7721 __initmv = {
-        .mv_name                = "Solution Engine 7721",
-        .mv_setup               = se7721_setup,
-        .mv_nr_irqs             = 109,
-        .mv_init_irq            = init_se7721_IRQ,
-};
diff --git a/arch/sh/boards/se/7722/irq.c b/arch/sh/boards/se/7722/irq.c
deleted file mode 100644
index 0b03f3f610b8..000000000000
--- a/arch/sh/boards/se/7722/irq.c
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * linux/arch/sh/boards/se/7722/irq.c
- *
- * Copyright (C) 2007  Nobuhiro Iwamatsu
- *
- * Hitachi UL SolutionEngine 7722 Support.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/se7722.h>
-
-static void disable_se7722_irq(unsigned int irq)
-{
-        unsigned int bit = irq - SE7722_FPGA_IRQ_BASE;
-        ctrl_outw(ctrl_inw(IRQ01_MASK) | 1 << bit, IRQ01_MASK);
-}
-
-static void enable_se7722_irq(unsigned int irq)
-{
-        unsigned int bit = irq - SE7722_FPGA_IRQ_BASE;
-        ctrl_outw(ctrl_inw(IRQ01_MASK) & ~(1 << bit), IRQ01_MASK);
-}
-
-static struct irq_chip se7722_irq_chip __read_mostly = {
-        .name           = "SE7722-FPGA",
-        .mask           = disable_se7722_irq,
-        .unmask         = enable_se7722_irq,
-        .mask_ack       = disable_se7722_irq,
-};
-
-static void se7722_irq_demux(unsigned int irq, struct irq_desc *desc)
-{
-        unsigned short intv = ctrl_inw(IRQ01_STS);
-        struct irq_desc *ext_desc;
-        unsigned int ext_irq = SE7722_FPGA_IRQ_BASE;
-
-        intv &= (1 << SE7722_FPGA_IRQ_NR) - 1;
-
-        while (intv) {
-                if (intv & 1) {
-                        ext_desc = irq_desc + ext_irq;
-                        handle_level_irq(ext_irq, ext_desc);
-                }
-                intv >>= 1;
-                ext_irq++;
-        }
-}
-
-/*
- * Initialize IRQ setting
- */
-void __init init_se7722_IRQ(void)
-{
-        int i;
-
-        ctrl_outw(0, IRQ01_MASK);       /* disable all irqs */
-        ctrl_outw(0x2000, 0xb03fffec);  /* mrshpc irq enable */
-
-        for (i = 0; i < SE7722_FPGA_IRQ_NR; i++)
-                set_irq_chip_and_handler_name(SE7722_FPGA_IRQ_BASE + i,
-                                              &se7722_irq_chip,
-                                              handle_level_irq, "level");
-
-        set_irq_chained_handler(IRQ0_IRQ, se7722_irq_demux);
-        set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW);
-
-        set_irq_chained_handler(IRQ1_IRQ, se7722_irq_demux);
-        set_irq_type(IRQ1_IRQ, IRQ_TYPE_LEVEL_LOW);
-}
diff --git a/arch/sh/boards/se/7722/setup.c b/arch/sh/boards/se/7722/setup.c
deleted file mode 100644
index ede3957fc14a..000000000000
--- a/arch/sh/boards/se/7722/setup.c
+++ /dev/null
@@ -1,196 +0,0 @@
-/*
- * linux/arch/sh/boards/se/7722/setup.c
- *
- * Copyright (C) 2007 Nobuhiro Iwamatsu
- *
- * Hitachi UL SolutionEngine 7722 Support.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/input.h>
-#include <linux/smc91x.h>
-#include <asm/machvec.h>
-#include <asm/se7722.h>
-#include <asm/io.h>
-#include <asm/heartbeat.h>
-#include <asm/sh_keysc.h>
-
-/* Heartbeat */
-static struct heartbeat_data heartbeat_data = {
-        .regsize = 16,
-};
-
-static struct resource heartbeat_resources[] = {
-        [0] = {
-                .start  = PA_LED,
-                .end    = PA_LED,
-                .flags  = IORESOURCE_MEM,
-        },
-};
-
-static struct platform_device heartbeat_device = {
-        .name           = "heartbeat",
-        .id             = -1,
-        .dev = {
-                .platform_data = &heartbeat_data,
-        },
-        .num_resources  = ARRAY_SIZE(heartbeat_resources),
-        .resource       = heartbeat_resources,
-};
-
-/* SMC91x */
-static struct smc91x_platdata smc91x_info = {
-        .flags = SMC91X_USE_16BIT,
-};
-
-static struct resource smc91x_eth_resources[] = {
-        [0] = {
-                .name   = "smc91x-regs" ,
-                .start  = PA_LAN + 0x300,
-                .end    = PA_LAN + 0x300 + 0x10 ,
-                .flags  = IORESOURCE_MEM,
-        },
-        [1] = {
-                .start  = SMC_IRQ,
-                .end    = SMC_IRQ,
-                .flags  = IORESOURCE_IRQ,
-        },
-};
-
-static struct platform_device smc91x_eth_device = {
-        .name           = "smc91x",
-        .id             = 0,
-        .dev = {
-                .dma_mask               = NULL,         /* don't use dma */
-                .coherent_dma_mask      = 0xffffffff,
-                .platform_data  = &smc91x_info,
-        },
-        .num_resources  = ARRAY_SIZE(smc91x_eth_resources),
-        .resource       = smc91x_eth_resources,
-};
-
-static struct resource cf_ide_resources[] = {
-        [0] = {
-                .start  = PA_MRSHPC_IO + 0x1f0,
-                .end    = PA_MRSHPC_IO + 0x1f0 + 8 ,
-                .flags  = IORESOURCE_IO,
-        },
-        [1] = {
-                .start  = PA_MRSHPC_IO + 0x1f0 + 0x206,
-                .end    = PA_MRSHPC_IO + 0x1f0 +8 + 0x206 + 8,
-                .flags  = IORESOURCE_IO,
-        },
-        [2] = {
-                .start  = MRSHPC_IRQ0,
-                .end    = MRSHPC_IRQ0,
-                .flags  = IORESOURCE_IRQ,
-        },
-};
-
-static struct platform_device cf_ide_device  = {
-        .name           = "pata_platform",
-        .id             = -1,
-        .num_resources  = ARRAY_SIZE(cf_ide_resources),
-        .resource       = cf_ide_resources,
-};
-
-static struct sh_keysc_info sh_keysc_info = {
-        .mode = SH_KEYSC_MODE_1, /* KEYOUT0->5, KEYIN0->4 */
-        .scan_timing = 3,
-        .delay = 5,
-        .keycodes = { /* SW1 -> SW30 */
-                KEY_A, KEY_B, KEY_C, KEY_D, KEY_E,
-                KEY_F, KEY_G, KEY_H, KEY_I, KEY_J,
-                KEY_K, KEY_L, KEY_M, KEY_N, KEY_O,
-                KEY_P, KEY_Q, KEY_R, KEY_S, KEY_T,
-                KEY_U, KEY_V, KEY_W, KEY_X, KEY_Y,
-                KEY_Z,
-                KEY_HOME, KEY_SLEEP, KEY_WAKEUP, KEY_COFFEE, /* life */
-        },
-};
-
-static struct resource sh_keysc_resources[] = {
-        [0] = {
-                .start  = 0x044b0000,
-                .end    = 0x044b000f,
-                .flags  = IORESOURCE_MEM,
-        },
-        [1] = {
-                .start  = 79,
-                .flags  = IORESOURCE_IRQ,
-        },
-};
-
-static struct platform_device sh_keysc_device = {
-        .name           = "sh_keysc",
-        .num_resources  = ARRAY_SIZE(sh_keysc_resources),
-        .resource       = sh_keysc_resources,
-        .dev    = {
-                .platform_data  = &sh_keysc_info,
-        },
-};
-
-static struct platform_device *se7722_devices[] __initdata = {
-        &heartbeat_device,
-        &smc91x_eth_device,
-        &cf_ide_device,
-        &sh_keysc_device,
-};
-
-static int __init se7722_devices_setup(void)
-{
-        return platform_add_devices(se7722_devices,
-                ARRAY_SIZE(se7722_devices));
-}
-device_initcall(se7722_devices_setup);
-
-static void __init se7722_setup(char **cmdline_p)
-{
-        ctrl_outw(0x010D, FPGA_OUT);    /* FPGA */
-
-        ctrl_outl(0x00051001, MSTPCR0);
-        ctrl_outl(0x00000000, MSTPCR1);
-        /* KEYSC, VOU, BEU, CEU, VEU, VPU, LCDC, USB */
-        ctrl_outl(0xffffb7c0, MSTPCR2);
-
-        ctrl_outw(0x0000, PORT_PECR);   /* PORT E 1 = IRQ5 ,E 0 = BS */
-        ctrl_outw(0x1000, PORT_PJCR);   /* PORT J 1 = IRQ1,J 0 =IRQ0 */
-
-        /* LCDC I/O */
-        ctrl_outw(0x0020, PORT_PSELD);
-
-        /* SIOF1*/
-        ctrl_outw(0x0003, PORT_PSELB);
-        ctrl_outw(0xe000, PORT_PSELC);
-        ctrl_outw(0x0000, PORT_PKCR);
-
-        /* LCDC */
-        ctrl_outw(0x4020, PORT_PHCR);
-        ctrl_outw(0x0000, PORT_PLCR);
-        ctrl_outw(0x0000, PORT_PMCR);
-        ctrl_outw(0x0002, PORT_PRCR);
-        ctrl_outw(0x0000, PORT_PXCR);   /* LCDC,CS6A */
-
-        /* KEYSC */
-        ctrl_outw(0x0A10, PORT_PSELA); /* BS,SHHID2 */
-        ctrl_outw(0x0000, PORT_PYCR);
-        ctrl_outw(0x0000, PORT_PZCR);
-        ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x4000, PORT_HIZCRA);
-        ctrl_outw(ctrl_inw(PORT_HIZCRC) & ~0xc000, PORT_HIZCRC);
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_se7722 __initmv = {
-        .mv_name                = "Solution Engine 7722" ,
-        .mv_setup               = se7722_setup ,
-        .mv_nr_irqs             = SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_NR,
-        .mv_init_irq            = init_se7722_IRQ,
-};
diff --git a/arch/sh/boards/se/7751/io.c b/arch/sh/boards/se/7751/io.c
deleted file mode 100644
index e8d846cec89d..000000000000
--- a/arch/sh/boards/se/7751/io.c
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * Copyright (C) 2001  Ian da Silva, Jeremy Siegel
- * Based largely on io_se.c.
- *
- * I/O routine for Hitachi 7751 SolutionEngine.
- *
- * Initial version only to support LAN access; some
- * placeholder code from io_se.c left in with the
- * expectation of later SuperIO and PCMCIA access.
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <asm/io.h>
-#include <asm/se7751.h>
-#include <asm/addrspace.h>
-
-static inline volatile u16 *port2adr(unsigned int port)
-{
-        if (port >= 0x2000)
-                return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
-        maybebadio((unsigned long)port);
-        return (volatile __u16*)port;
-}
-
-/*
- * General outline: remap really low stuff [eventually] to SuperIO,
- * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO)
- * is mapped through the PCI IO window.  Stuff with high bits (PXSEG)
- * should be way beyond the window, and is used  w/o translation for
- * compatibility.
- */
-unsigned char sh7751se_inb(unsigned long port)
-{
-        if (PXSEG(port))
-                return *(volatile unsigned char *)port;
-        else if (is_pci_ioaddr(port))
-                return *(volatile unsigned char *)pci_ioaddr(port);
-        else
-                return (*port2adr(port)) & 0xff;
-}
-
-unsigned char sh7751se_inb_p(unsigned long port)
-{
-        unsigned char v;
-
-        if (PXSEG(port))
-                v = *(volatile unsigned char *)port;
-        else if (is_pci_ioaddr(port))
-                v = *(volatile unsigned char *)pci_ioaddr(port);
-        else
-                v = (*port2adr(port)) & 0xff;
-        ctrl_delay();
-        return v;
-}
-
-unsigned short sh7751se_inw(unsigned long port)
-{
-        if (PXSEG(port))
-                return *(volatile unsigned short *)port;
-        else if (is_pci_ioaddr(port))
-                return *(volatile unsigned short *)pci_ioaddr(port);
-        else if (port >= 0x2000)
-                return *port2adr(port);
-        else
-                maybebadio(port);
-        return 0;
-}
-
-unsigned int sh7751se_inl(unsigned long port)
-{
-        if (PXSEG(port))
-                return *(volatile unsigned long *)port;
-        else if (is_pci_ioaddr(port))
-                return *(volatile unsigned int *)pci_ioaddr(port);
-        else if (port >= 0x2000)
-                return *port2adr(port);
-        else
-                maybebadio(port);
-        return 0;
-}
-
-void sh7751se_outb(unsigned char value, unsigned long port)
-{
-
-        if (PXSEG(port))
-                *(volatile unsigned char *)port = value;
-        else if (is_pci_ioaddr(port))
-                *((unsigned char*)pci_ioaddr(port)) = value;
-        else
-                *(port2adr(port)) = value;
-}
-
-void sh7751se_outb_p(unsigned char value, unsigned long port)
-{
-        if (PXSEG(port))
-                *(volatile unsigned char *)port = value;
-        else if (is_pci_ioaddr(port))
-                *((unsigned char*)pci_ioaddr(port)) = value;
-        else
-                *(port2adr(port)) = value;
-        ctrl_delay();
-}
-
-void sh7751se_outw(unsigned short value, unsigned long port)
-{
-        if (PXSEG(port))
-                *(volatile unsigned short *)port = value;
-        else if (is_pci_ioaddr(port))
-                *((unsigned short *)pci_ioaddr(port)) = value;
-        else if (port >= 0x2000)
-                *port2adr(port) = value;
-        else
-                maybebadio(port);
-}
-
-void sh7751se_outl(unsigned int value, unsigned long port)
-{
-        if (PXSEG(port))
-                *(volatile unsigned long *)port = value;
-        else if (is_pci_ioaddr(port))
-                *((unsigned long*)pci_ioaddr(port)) = value;
-        else
-                maybebadio(port);
-}
-
-void sh7751se_insl(unsigned long port, void *addr, unsigned long count)
-{
-        maybebadio(port);
-}
-
-void sh7751se_outsl(unsigned long port, const void *addr, unsigned long count)
-{
-        maybebadio(port);
-}
diff --git a/arch/sh/boards/se/7751/irq.c b/arch/sh/boards/se/7751/irq.c
deleted file mode 100644
index c3d12590e5db..000000000000
--- a/arch/sh/boards/se/7751/irq.c
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * linux/arch/sh/boards/se/7751/irq.c
- *
- * Copyright (C) 2000  Kazumoto Kojima
- *
- * Hitachi SolutionEngine Support.
- *
- * Modified for 7751 Solution Engine by
- * Ian da Silva and Jeremy Siegel, 2001.
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <asm/irq.h>
-#include <asm/se7751.h>
-
-static struct ipr_data ipr_irq_table[] = {
-        { 13, 3, 3, 2 },
-        /* Add additional entries here as drivers are added and tested. */
-};
-
-static unsigned long ipr_offsets[] = {
-        BCR_ILCRA,
-        BCR_ILCRB,
-        BCR_ILCRC,
-        BCR_ILCRD,
-        BCR_ILCRE,
-        BCR_ILCRF,
-        BCR_ILCRG,
-};
-
-static struct ipr_desc ipr_irq_desc = {
-        .ipr_offsets    = ipr_offsets,
-        .nr_offsets     = ARRAY_SIZE(ipr_offsets),
-
-        .ipr_data       = ipr_irq_table,
-        .nr_irqs        = ARRAY_SIZE(ipr_irq_table),
-
-        .chip = {
-                .name   = "IPR-se7751",
-        },
-};
-
-/*
- * Initialize IRQ setting
- */
-void __init init_7751se_IRQ(void)
-{
-        register_ipr_controller(&ipr_irq_desc);
-}
diff --git a/arch/sh/boards/se/7751/setup.c b/arch/sh/boards/se/7751/setup.c
deleted file mode 100644
index deefbfd92591..000000000000
--- a/arch/sh/boards/se/7751/setup.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * linux/arch/sh/boards/se/7751/setup.c
- *
- * Copyright (C) 2000  Kazumoto Kojima
- *
- * Hitachi SolutionEngine Support.
- *
- * Modified for 7751 Solution Engine by
- * Ian da Silva and Jeremy Siegel, 2001.
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <asm/machvec.h>
-#include <asm/se7751.h>
-#include <asm/io.h>
-#include <asm/heartbeat.h>
-
-static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
-
-static struct heartbeat_data heartbeat_data = {
-        .bit_pos        = heartbeat_bit_pos,
-        .nr_bits        = ARRAY_SIZE(heartbeat_bit_pos),
-};
-
-static struct resource heartbeat_resources[] = {
-        [0] = {
-                .start  = PA_LED,
-                .end    = PA_LED,
-                .flags  = IORESOURCE_MEM,
-        },
-};
-
-static struct platform_device heartbeat_device = {
-        .name           = "heartbeat",
-        .id             = -1,
-        .dev    = {
-                .platform_data  = &heartbeat_data,
-        },
-        .num_resources  = ARRAY_SIZE(heartbeat_resources),
-        .resource       = heartbeat_resources,
-};
-
-static struct platform_device *se7751_devices[] __initdata = {
-        &heartbeat_device,
-};
-
-static int __init se7751_devices_setup(void)
-{
-        return platform_add_devices(se7751_devices, ARRAY_SIZE(se7751_devices));
-}
-__initcall(se7751_devices_setup);
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_7751se __initmv = {
-        .mv_name                = "7751 SolutionEngine",
-        .mv_nr_irqs             = 72,
-
-        .mv_inb                 = sh7751se_inb,
-        .mv_inw                 = sh7751se_inw,
-        .mv_inl                 = sh7751se_inl,
-        .mv_outb                = sh7751se_outb,
-        .mv_outw                = sh7751se_outw,
-        .mv_outl                = sh7751se_outl,
-
-        .mv_inb_p               = sh7751se_inb_p,
-        .mv_inw_p               = sh7751se_inw,
-        .mv_inl_p               = sh7751se_inl,
-        .mv_outb_p              = sh7751se_outb_p,
-        .mv_outw_p              = sh7751se_outw,
-        .mv_outl_p              = sh7751se_outl,
-
-        .mv_insl                = sh7751se_insl,
-        .mv_outsl               = sh7751se_outsl,
-
-        .mv_init_irq            = init_7751se_IRQ,
-};
diff --git a/arch/sh/boards/se/7780/irq.c b/arch/sh/boards/se/7780/irq.c
deleted file mode 100644
index 6bd70da6bb47..000000000000
--- a/arch/sh/boards/se/7780/irq.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * linux/arch/sh/boards/se/7780/irq.c
- *
- * Copyright (C) 2006,2007  Nobuhiro Iwamatsu
- *
- * Hitachi UL SolutionEngine 7780 Support.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/se7780.h>
-
-/*
- * Initialize IRQ setting
- */
-void __init init_se7780_IRQ(void)
-{
-        /* enable all interrupt at FPGA */
-        ctrl_outw(0, FPGA_INTMSK1);
-        /* mask SM501 interrupt */
-        ctrl_outw((ctrl_inw(FPGA_INTMSK1) | 0x0002), FPGA_INTMSK1);
-        /* enable all interrupt at FPGA */
-        ctrl_outw(0, FPGA_INTMSK2);
-
-        /* set FPGA INTSEL register */
-        /* FPGA + 0x06 */
-        ctrl_outw( ((IRQPIN_SM501 << IRQPOS_SM501) |
-                (IRQPIN_SMC91CX << IRQPOS_SMC91CX)), FPGA_INTSEL1);
-
-        /* FPGA + 0x08 */
-        ctrl_outw(((IRQPIN_EXTINT4 << IRQPOS_EXTINT4) |
-                (IRQPIN_EXTINT3 << IRQPOS_EXTINT3) |
-                (IRQPIN_EXTINT2 << IRQPOS_EXTINT2) |
-                (IRQPIN_EXTINT1 << IRQPOS_EXTINT1)), FPGA_INTSEL2);
-
-        /* FPGA + 0x0A */
-        ctrl_outw((IRQPIN_PCCPW << IRQPOS_PCCPW), FPGA_INTSEL3);
-
-        plat_irq_setup_pins(IRQ_MODE_IRQ); /* install handlers for IRQ0-7 */
-}
diff --git a/arch/sh/boards/se/7780/setup.c b/arch/sh/boards/se/7780/setup.c
deleted file mode 100644
index 0f08ab3b2bec..000000000000
--- a/arch/sh/boards/se/7780/setup.c
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- * linux/arch/sh/boards/se/7780/setup.c
- *
- * Copyright (C) 2006,2007  Nobuhiro Iwamatsu
- *
- * Hitachi UL SolutionEngine 7780 Support.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <asm/machvec.h>
-#include <asm/se7780.h>
-#include <asm/io.h>
-#include <asm/heartbeat.h>
-
-/* Heartbeat */
-static struct heartbeat_data heartbeat_data = {
-        .regsize = 16,
-};
-
-static struct resource heartbeat_resources[] = {
-        [0] = {
-                .start  = PA_LED,
-                .end    = PA_LED,
-                .flags  = IORESOURCE_MEM,
-        },
-};
-
-static struct platform_device heartbeat_device = {
-        .name           = "heartbeat",
-        .id             = -1,
-        .dev = {
-                .platform_data = &heartbeat_data,
-        },
-        .num_resources  = ARRAY_SIZE(heartbeat_resources),
-        .resource       = heartbeat_resources,
-};
-
-/* SMC91x */
-static struct resource smc91x_eth_resources[] = {
-        [0] = {
-                .name   = "smc91x-regs" ,
-                .start  = PA_LAN + 0x300,
-                .end    = PA_LAN + 0x300 + 0x10 ,
-                .flags  = IORESOURCE_MEM,
-        },
-        [1] = {
-                .start  = SMC_IRQ,
-                .end    = SMC_IRQ,
-                .flags  = IORESOURCE_IRQ,
-        },
-};
-
-static struct platform_device smc91x_eth_device = {
-        .name           = "smc91x",
-        .id             = 0,
-        .dev = {
-                .dma_mask               = NULL,         /* don't use dma */
-                .coherent_dma_mask      = 0xffffffff,
-        },
-        .num_resources  = ARRAY_SIZE(smc91x_eth_resources),
-        .resource       = smc91x_eth_resources,
-};
-
-static struct platform_device *se7780_devices[] __initdata = {
-        &heartbeat_device,
-        &smc91x_eth_device,
-};
-
-static int __init se7780_devices_setup(void)
-{
-        return platform_add_devices(se7780_devices,
-                ARRAY_SIZE(se7780_devices));
-}
-device_initcall(se7780_devices_setup);
-
-#define GPIO_PHCR        0xFFEA000E
-#define GPIO_PMSELR      0xFFEA0080
-#define GPIO_PECR        0xFFEA0008
-
-static void __init se7780_setup(char **cmdline_p)
-{
-        /* "SH-Linux" on LED Display */
-        ctrl_outw( 'S' , PA_LED_DISP + (DISP_SEL0_ADDR << 1) );
-        ctrl_outw( 'H' , PA_LED_DISP + (DISP_SEL1_ADDR << 1) );
-        ctrl_outw( '-' , PA_LED_DISP + (DISP_SEL2_ADDR << 1) );
-        ctrl_outw( 'L' , PA_LED_DISP + (DISP_SEL3_ADDR << 1) );
-        ctrl_outw( 'i' , PA_LED_DISP + (DISP_SEL4_ADDR << 1) );
-        ctrl_outw( 'n' , PA_LED_DISP + (DISP_SEL5_ADDR << 1) );
-        ctrl_outw( 'u' , PA_LED_DISP + (DISP_SEL6_ADDR << 1) );
-        ctrl_outw( 'x' , PA_LED_DISP + (DISP_SEL7_ADDR << 1) );
-
-        printk(KERN_INFO "Hitachi UL Solutions Engine 7780SE03 support.\n");
-
-        /*
-         * PCI REQ/GNT setting
-         *   REQ0/GNT0 -> USB
-         *   REQ1/GNT1 -> PC Card
-         *   REQ2/GNT2 -> Serial ATA
-         *   REQ3/GNT3 -> PCI slot
-         */
-        ctrl_outw(0x0213, FPGA_REQSEL);
-
-        /* GPIO setting */
-        ctrl_outw(0x0000, GPIO_PECR);
-        ctrl_outw(ctrl_inw(GPIO_PHCR)&0xfff3, GPIO_PHCR);
-        ctrl_outw(0x0c00, GPIO_PMSELR);
-
-        /* iVDR Power ON */
-        ctrl_outw(0x0001, FPGA_IVDRPW);
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_se7780 __initmv = {
-        .mv_name                = "Solution Engine 7780" ,
-        .mv_setup               = se7780_setup ,
-        .mv_nr_irqs             = 111 ,
-        .mv_init_irq            = init_se7780_IRQ,
-};
diff --git a/arch/sh/boards/sh03/setup.c b/arch/sh/boards/sh03/setup.c
deleted file mode 100644
index 934ac4f1c48f..000000000000
--- a/arch/sh/boards/sh03/setup.c
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * linux/arch/sh/boards/sh03/setup.c
- *
- * Copyright (C) 2004  Interface Co.,Ltd. Saito.K
- *
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/pci.h>
-#include <linux/platform_device.h>
-#include <asm/io.h>
-#include <asm/rtc.h>
-#include <asm/sh03/io.h>
-#include <asm/sh03/sh03.h>
-#include <asm/addrspace.h>
-
-static void __init init_sh03_IRQ(void)
-{
-        plat_irq_setup_pins(IRQ_MODE_IRQ);
-}
-
-extern void *cf_io_base;
-
-static void __iomem *sh03_ioport_map(unsigned long port, unsigned int size)
-{
-        if (PXSEG(port))
-                return (void __iomem *)port;
-        /* CompactFlash (IDE) */
-        if (((port >= 0x1f0) && (port <= 0x1f7)) || (port == 0x3f6))
-                return (void __iomem *)((unsigned long)cf_io_base + port);
-
-        return (void __iomem *)(port + PCI_IO_BASE);
-}
-
-/* arch/sh/boards/sh03/rtc.c */
-void sh03_time_init(void);
-
-static void __init sh03_setup(char **cmdline_p)
-{
-        board_time_init = sh03_time_init;
-}
-
-static struct resource heartbeat_resources[] = {
-        [0] = {
-                .start  = 0xa0800000,
-                .end    = 0xa0800000,
-                .flags  = IORESOURCE_MEM,
-        },
-};
-
-static struct platform_device heartbeat_device = {
-        .name           = "heartbeat",
-        .id             = -1,
-        .num_resources  = ARRAY_SIZE(heartbeat_resources),
-        .resource       = heartbeat_resources,
-};
-
-static struct platform_device *sh03_devices[] __initdata = {
-        &heartbeat_device,
-};
-
-static int __init sh03_devices_setup(void)
-{
-        return platform_add_devices(sh03_devices, ARRAY_SIZE(sh03_devices));
-}
-__initcall(sh03_devices_setup);
-
-static struct sh_machine_vector mv_sh03 __initmv = {
-        .mv_name                = "Interface (CTP/PCI-SH03)",
-        .mv_setup               = sh03_setup,
-        .mv_nr_irqs             = 48,
-        .mv_ioport_map          = sh03_ioport_map,
-        .mv_init_irq            = init_sh03_IRQ,
-};
diff --git a/arch/sh/boards/shmin/Makefile b/arch/sh/boards/shmin/Makefile
deleted file mode 100644
index 3190cc72430e..000000000000
--- a/arch/sh/boards/shmin/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for the SHMIN board.
-#
-
-obj-y    := setup.o
diff --git a/arch/sh/boards/snapgear/setup.c b/arch/sh/boards/snapgear/setup.c
deleted file mode 100644
index 7022483f98e8..000000000000
--- a/arch/sh/boards/snapgear/setup.c
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * linux/arch/sh/boards/snapgear/setup.c
- *
- * Copyright (C) 2002  David McCullough <davidm@snapgear.com>
- * Copyright (C) 2003  Paul Mundt <lethal@linux-sh.org>
- *
- * Based on files with the following comments:
- *
- *           Copyright (C) 2000  Kazumoto Kojima
- *
- *           Modified for 7751 Solution Engine by
- *           Ian da Silva and Jeremy Siegel, 2001.
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/timer.h>
-#include <linux/delay.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <asm/machvec.h>
-#include <asm/snapgear.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/cpu/timer.h>
-
-/*
- * EraseConfig handling functions
- */
-
-static irqreturn_t eraseconfig_interrupt(int irq, void *dev_id)
-{
-        (void)ctrl_inb(0xb8000000);     /* dummy read */
-
-        printk("SnapGear: erase switch interrupt!\n");
-
-        return IRQ_HANDLED;
-}
-
-static int __init eraseconfig_init(void)
-{
-        printk("SnapGear: EraseConfig init\n");
-        /* Setup "EraseConfig" switch on external IRQ 0 */
-        if (request_irq(IRL0_IRQ, eraseconfig_interrupt, IRQF_DISABLED,
-                                "Erase Config", NULL))
-                printk("SnapGear: failed to register IRQ%d for Reset witch\n",
-                                IRL0_IRQ);
-        else
-                printk("SnapGear: registered EraseConfig switch on IRQ%d\n",
-                                IRL0_IRQ);
-        return(0);
-}
-
-module_init(eraseconfig_init);
-
-/****************************************************************************/
-/*
- * Initialize IRQ setting
- *
- * IRL0 = erase switch
- * IRL1 = eth0
- * IRL2 = eth1
- * IRL3 = crypto
- */
-
-static void __init init_snapgear_IRQ(void)
-{
-        printk("Setup SnapGear IRQ/IPR ...\n");
-        /* enable individual interrupt mode for externals */
-        plat_irq_setup_pins(IRQ_MODE_IRQ);
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_snapgear __initmv = {
-        .mv_name                = "SnapGear SecureEdge5410",
-        .mv_nr_irqs             = 72,
-
-        .mv_inb                 = snapgear_inb,
-        .mv_inw                 = snapgear_inw,
-        .mv_inl                 = snapgear_inl,
-        .mv_outb                = snapgear_outb,
-        .mv_outw                = snapgear_outw,
-        .mv_outl                = snapgear_outl,
-
-        .mv_inb_p               = snapgear_inb_p,
-        .mv_inw_p               = snapgear_inw,
-        .mv_inl_p               = snapgear_inl,
-        .mv_outb_p              = snapgear_outb_p,
-        .mv_outw_p              = snapgear_outw,
-        .mv_outl_p              = snapgear_outl,
-
-        .mv_init_irq            = init_snapgear_IRQ,
-};
diff --git a/arch/sh/boot/Makefile b/arch/sh/boot/Makefile
index 89b408620dcb..5b54965eef98 100644
--- a/arch/sh/boot/Makefile
+++ b/arch/sh/boot/Makefile
@@ -18,9 +18,10 @@ CONFIG_PAGE_OFFSET	?= 0x80000000
 CONFIG_MEMORY_START     ?= 0x0c000000
 CONFIG_BOOT_LINK_OFFSET ?= 0x00800000
 CONFIG_ZERO_PAGE_OFFSET ?= 0x00001000
+CONFIG_ENTRY_OFFSET     ?= 0x00001000
 
 export CONFIG_PAGE_OFFSET CONFIG_MEMORY_START CONFIG_BOOT_LINK_OFFSET \
-       CONFIG_ZERO_PAGE_OFFSET
+       CONFIG_ZERO_PAGE_OFFSET CONFIG_ENTRY_OFFSET
 
 targets := zImage vmlinux.srec uImage uImage.srec
 subdir- := compressed
@@ -40,7 +41,7 @@ KERNEL_LOAD	:= $(shell /bin/bash -c 'printf "0x%08x" \
 KERNEL_ENTRY    := $(shell /bin/bash -c 'printf "0x%08x" \
                      $$[$(CONFIG_PAGE_OFFSET)  + \
                         $(CONFIG_MEMORY_START) + \
-                        $(CONFIG_ZERO_PAGE_OFFSET)+0x1000]')
+                        $(CONFIG_ZERO_PAGE_OFFSET) + $(CONFIG_ENTRY_OFFSET)]')
 
 quiet_cmd_uimage = UIMAGE  $@
       cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A sh -O linux -T kernel \
diff --git a/arch/sh/boot/compressed/Makefile_32 b/arch/sh/boot/compressed/Makefile_32
index c0d25fb1aa60..47685f618ae7 100644
--- a/arch/sh/boot/compressed/Makefile_32
+++ b/arch/sh/boot/compressed/Makefile_32
@@ -35,8 +35,7 @@ $(obj)/vmlinux.bin: vmlinux FORCE
 $(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
         $(call if_changed,gzip)
 
-LDFLAGS_piggy.o := -r --format binary --oformat elf32-sh-linux -T
 OBJCOPYFLAGS += -R .empty_zero_page
 
-$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE
-        $(call if_changed,ld)
+$(obj)/piggy.o: $(obj)/piggy.S $(obj)/vmlinux.bin.gz FORCE
+        $(call if_changed,as_o_S)
diff --git a/arch/sh/boot/compressed/Makefile_64 b/arch/sh/boot/compressed/Makefile_64
index 912f3e205a0d..658d4f915556 100644
--- a/arch/sh/boot/compressed/Makefile_64
+++ b/arch/sh/boot/compressed/Makefile_64
@@ -37,8 +37,7 @@ $(obj)/vmlinux.bin: vmlinux FORCE
 $(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
         $(call if_changed,gzip)
 
-LDFLAGS_piggy.o := -r --format binary --oformat elf32-sh64-linux -T
 OBJCOPYFLAGS += -R .empty_zero_page
 
-$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE
-        $(call if_changed,ld)
+$(obj)/piggy.o: $(obj)/piggy.S $(obj)/vmlinux.bin.gz FORCE
+        $(call if_changed,as_o_S)
diff --git a/arch/sh/boot/compressed/head_64.S b/arch/sh/boot/compressed/head_64.S
index f72c1989f5f2..622eac3cf556 100644
--- a/arch/sh/boot/compressed/head_64.S
+++ b/arch/sh/boot/compressed/head_64.S
@@ -14,8 +14,8 @@
  *   Copyright (C) 2002 Stuart Menefy (stuart.menefy@st.com)
  */
 #include <asm/cache.h>
-#include <asm/cpu/mmu_context.h>
-#include <asm/cpu/registers.h>
+#include <cpu/mmu_context.h>
+#include <cpu/registers.h>
 
 /*
  * Fixed TLB entries to identity map the beginning of RAM
diff --git a/arch/sh/boot/compressed/piggy.S b/arch/sh/boot/compressed/piggy.S
new file mode 100644
index 000000000000..566071926b13
--- /dev/null
+++ b/arch/sh/boot/compressed/piggy.S
@@ -0,0 +1,8 @@
+        .global input_len, input_data
+        .data
+input_len:
+        .long   input_data_end - input_data
+input_data:
+        .incbin "arch/sh/boot/compressed/vmlinux.bin.gz"
+input_data_end:
+        .end
diff --git a/arch/sh/boot/compressed/vmlinux.scr b/arch/sh/boot/compressed/vmlinux.scr
deleted file mode 100644
index 1ed9d791f863..000000000000
--- a/arch/sh/boot/compressed/vmlinux.scr
+++ /dev/null
@@ -1,9 +0,0 @@
-SECTIONS
-{
-  .data : { 
-        input_len = .;
-        LONG(input_data_end - input_data) input_data = .; 
-        *(.data) 
-        input_data_end = .; 
-        }
-}
diff --git a/arch/sh/configs/ap325rxa_defconfig b/arch/sh/configs/ap325rxa_defconfig
new file mode 100644
index 000000000000..29926a9b9ce2
--- /dev/null
+++ b/arch/sh/configs/ap325rxa_defconfig
@@ -0,0 +1,964 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:18:59 2008
+#
+CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System type
+#
+CONFIG_CPU_SH4=y
+CONFIG_CPU_SH4A=y
+CONFIG_CPU_SHX2=y
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+CONFIG_CPU_SUBTYPE_SH7723=y
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
+
+#
+# Memory management options
+#
+CONFIG_QUICKLIST=y
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_MEMORY_START=0x08000000
+CONFIG_MEMORY_SIZE=0x08000000
+CONFIG_29BIT=y
+# CONFIG_X2TLB is not set
+CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_SH_FPU=y
+# CONFIG_SH_STORE_QUEUES is not set
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_PTEA=y
+CONFIG_CPU_HAS_FPU=y
+
+#
+# Board support
+#
+CONFIG_SH_AP325RXA=y
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=16
+CONFIG_SH_PCLK_FREQ=33333333
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+
+#
+# Additional SuperH Device Drivers
+#
+# CONFIG_HEARTBEAT is not set
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_GUSA=y
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=tty1 console=ttySC5,38400 root=/dev/nfs ip=dhcp"
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0xffffffff
+CONFIG_MTD_PHYSMAP_LEN=0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_STNIC is not set
+# CONFIG_SMC91X is not set
+CONFIG_SMC911X=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=6
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+CONFIG_NLS_CODEPAGE_932=y
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_SH_STANDARD_BIOS is not set
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_SH_KGDB is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/dreamcast_defconfig b/arch/sh/configs/dreamcast_defconfig
index 57728788b753..d4075283956d 100644
--- a/arch/sh/configs/dreamcast_defconfig
+++ b/arch/sh/configs/dreamcast_defconfig
@@ -1,9 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc7
-# Fri Sep 21 15:46:27 2007
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:34:24 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -19,6 +21,7 @@ CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -37,12 +40,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
@@ -55,21 +61,38 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+# CONFIG_OPROFILE is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -80,6 +103,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -93,13 +117,17 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System type
 #
 CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -108,6 +136,7 @@ CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
 # CONFIG_CPU_SUBTYPE_SH7712 is not set
 # CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 CONFIG_CPU_SUBTYPE_SH7091=y
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -116,14 +145,17 @@ CONFIG_CPU_SUBTYPE_SH7091=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
 # CONFIG_CPU_SUBTYPE_SH7785 is not set
 # CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -133,6 +165,7 @@ CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x01000000
+CONFIG_29BIT=y
 CONFIG_VSYSCALL=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
@@ -142,12 +175,15 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_HUGETLB_PAGE_SIZE_64K=y
 # CONFIG_HUGETLB_PAGE_SIZE_256K is not set
 # CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
 # CONFIG_HUGETLB_PAGE_SIZE_4MB is not set
 # CONFIG_HUGETLB_PAGE_SIZE_64MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_512MB is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -155,6 +191,8 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
@@ -194,6 +232,7 @@ CONFIG_SH_PCLK_FREQ=49876504
 # CONFIG_TICK_ONESHOT is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -204,7 +243,10 @@ CONFIG_CPU_FREQ_TABLE=y
 CONFIG_CPU_FREQ_STAT=y
 # CONFIG_CPU_FREQ_STAT_DETAILS is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
 # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
 CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
@@ -239,12 +281,15 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_PREEMPT_BKL=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
 
 #
 # Boot options
@@ -263,10 +308,7 @@ CONFIG_PCI=y
 CONFIG_SH_PCIDMA_NONCOHERENT=y
 CONFIG_PCI_AUTO=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+CONFIG_PCI_LEGACY=y
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 
@@ -291,6 +333,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -309,6 +352,7 @@ CONFIG_IP_FIB_HASH=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -316,8 +360,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -334,10 +376,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -345,6 +383,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -366,6 +405,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
@@ -374,6 +414,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_MTD is not set
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
+CONFIG_GDROM=y
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
 # CONFIG_BLK_DEV_UMEM is not set
@@ -384,11 +425,15 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -400,44 +445,49 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
+# CONFIG_FUSION is not set
 
 #
-# Fusion MPT device support
+# IEEE 1394 (FireWire) support
 #
-# CONFIG_FUSION is not set
 
 #
-# IEEE 1394 (FireWire) support
+# Enable only one of the two stacks, unless you know what you are doing
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
+# CONFIG_SMC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
 # CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
@@ -449,6 +499,7 @@ CONFIG_8139TOO=y
 # CONFIG_8139TOO_TUNE_TWISTER is not set
 # CONFIG_8139TOO_8129 is not set
 # CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
@@ -464,12 +515,12 @@ CONFIG_8139TOO=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -491,7 +542,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -505,6 +555,8 @@ CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_MAPLE is not set
+# CONFIG_KEYBOARD_SH_KEYSC is not set
 CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
 # CONFIG_MOUSE_SERIAL is not set
@@ -530,10 +582,13 @@ CONFIG_SERIO_LIBPS2=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -553,6 +608,19 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -568,45 +636,40 @@ CONFIG_SH_WDT=y
 #
 # CONFIG_PCIPCWATCHDOG is not set
 # CONFIG_WDTPCI is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
 
 #
-# SPI support
+# Sonics Silicon Backplane
 #
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Graphics support
+# Multimedia drivers
 #
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_DAB is not set
 
 #
-# Display device support
+# Graphics support
 #
-# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
@@ -615,11 +678,12 @@ CONFIG_FIRMWARE_EDID=y
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -653,7 +717,15 @@ CONFIG_FB_PVR2=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+# CONFIG_FB_SH_MOBILE_LCDC is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
@@ -680,49 +752,30 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_SUPERH_MONO is not set
 # CONFIG_LOGO_SUPERH_VGA16 is not set
 CONFIG_LOGO_SUPERH_CLUT224=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -735,14 +788,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -771,7 +821,6 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -786,14 +835,14 @@ CONFIG_RAMFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
 # CONFIG_SMB_FS is not set
@@ -807,35 +856,25 @@ CONFIG_RAMFS=y
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 # CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
 
 #
-# Profiling support
-#
-CONFIG_PROFILING=y
-# CONFIG_OPROFILE is not set
-
-#
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_SH_KGDB is not set
@@ -845,14 +884,95 @@ CONFIG_ENABLE_MUST_CHECK=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/hp6xx_defconfig b/arch/sh/configs/hp6xx_defconfig
index 756d38dc2f71..41e25b3a5b01 100644
--- a/arch/sh/configs/hp6xx_defconfig
+++ b/arch/sh/configs/hp6xx_defconfig
@@ -1,9 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc4
-# Tue Sep 11 19:42:44 2007
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:24:57 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -20,6 +22,7 @@ CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -34,12 +37,15 @@ CONFIG_SWAP=y
 # CONFIG_SYSVIPC is not set
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_USER_NS is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
@@ -52,6 +58,7 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
@@ -64,6 +71,19 @@ CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -73,6 +93,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -86,13 +107,17 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System type
 #
 CONFIG_CPU_SH3=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -101,6 +126,7 @@ CONFIG_CPU_SUBTYPE_SH7709=y
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
 # CONFIG_CPU_SUBTYPE_SH7712 is not set
 # CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -109,14 +135,17 @@ CONFIG_CPU_SUBTYPE_SH7709=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
 # CONFIG_CPU_SUBTYPE_SH7785 is not set
 # CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -126,6 +155,7 @@ CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x0d000000
 CONFIG_MEMORY_SIZE=0x00400000
+CONFIG_29BIT=y
 CONFIG_VSYSCALL=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
@@ -135,7 +165,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -143,6 +175,8 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
@@ -181,6 +215,7 @@ CONFIG_SH_PCLK_FREQ=22110000
 # CONFIG_TICK_ONESHOT is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -219,11 +254,14 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
 
 #
 # Boot options
@@ -237,10 +275,6 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000
 #
 CONFIG_ISA=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 CONFIG_PCCARD=y
 # CONFIG_PCMCIA_DEBUG is not set
 CONFIG_PCMCIA=y
@@ -263,11 +297,12 @@ CONFIG_BINFMT_ELF=y
 #
 # Power management options (EXPERIMENTAL)
 #
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_PM=y
-CONFIG_PM_LEGACY=y
 # CONFIG_PM_DEBUG is not set
 CONFIG_PM_SLEEP=y
 CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
 CONFIG_APM_EMULATION=y
 
 #
@@ -282,9 +317,12 @@ CONFIG_APM_EMULATION=y
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_MTD is not set
 # CONFIG_PARPORT is not set
@@ -294,8 +332,11 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -332,6 +373,7 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AHA152X is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
@@ -342,14 +384,17 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
 # CONFIG_SCSI_NCR53C406A is not set
 # CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
 # CONFIG_SCSI_QLOGIC_FAS is not set
 # CONFIG_SCSI_SYM53C416 is not set
 # CONFIG_SCSI_T128 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
 # CONFIG_PATA_LEGACY is not set
 # CONFIG_PATA_PCMCIA is not set
 # CONFIG_PATA_QDI is not set
@@ -370,11 +415,9 @@ CONFIG_INPUT_POLLDEV=y
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_TSDEV=y
-CONFIG_INPUT_TSDEV_SCREEN_X=240
-CONFIG_INPUT_TSDEV_SCREEN_Y=320
 CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
+# CONFIG_INPUT_APMPOWER is not set
 
 #
 # Input Device Drivers
@@ -387,6 +430,7 @@ CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_HP6XX=y
+# CONFIG_KEYBOARD_SH_KEYSC is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -395,12 +439,15 @@ CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
 CONFIG_TOUCHSCREEN_HP600=y
+# CONFIG_TOUCHSCREEN_HTCPEN is not set
 # CONFIG_TOUCHSCREEN_PENMOUNT is not set
 # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
 # CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 # CONFIG_INPUT_MISC is not set
 
 #
@@ -417,9 +464,11 @@ CONFIG_SERIO=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -439,7 +488,6 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=64
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
@@ -454,39 +502,45 @@ CONFIG_HW_RANDOM=y
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
-# CONFIG_DAB is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Graphics support
+# Multimedia drivers
 #
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_HP680=y
+# CONFIG_DAB is not set
 
 #
-# Display device support
+# Graphics support
 #
-# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_FB=y
@@ -495,11 +549,12 @@ CONFIG_FIRMWARE_EDID=y
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -511,7 +566,20 @@ CONFIG_FB_DEFERRED_IO=y
 #
 # CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_HIT=y
+CONFIG_FB_SH_MOBILE_LCDC=y
 # CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
+CONFIG_BACKLIGHT_HP680=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
@@ -533,15 +601,13 @@ CONFIG_FONT_PEARL_8x8=y
 # CONFIG_FONT_SUN12x22 is not set
 # CONFIG_FONT_10x18 is not set
 # CONFIG_LOGO is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -564,9 +630,10 @@ CONFIG_RTC_INTF_DEV=y
 #
 # Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
@@ -575,23 +642,7 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_SH=y
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -606,13 +657,10 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -643,7 +691,6 @@ CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -658,8 +705,11 @@ CONFIG_RAMFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 
@@ -668,10 +718,6 @@ CONFIG_RAMFS=y
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_CODEPAGE_437 is not set
@@ -714,22 +760,21 @@ CONFIG_NLS_CODEPAGE_850=y
 # CONFIG_NLS_UTF8 is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_SH_KGDB is not set
@@ -739,50 +784,95 @@ CONFIG_ENABLE_MUST_CHECK=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_LZO is not set
 # CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/landisk_defconfig b/arch/sh/configs/landisk_defconfig
index 38f934ab50c7..99cc39c5c6ca 100644
--- a/arch/sh/configs/landisk_defconfig
+++ b/arch/sh/configs/landisk_defconfig
@@ -1,44 +1,53 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.19
-# Thu Dec  7 17:13:04 2006
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:35:07 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-# CONFIG_GENERIC_TIME is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
@@ -50,34 +59,48 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -91,67 +114,26 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System type
 #
-# CONFIG_SH_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-# CONFIG_SH_7343_SOLUTION_ENGINE is not set
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_EC3104 is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_BIGSUR is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-# CONFIG_SH_7710VOIPGW is not set
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_R7780RP is not set
-# CONFIG_SH_EDOSK7705 is not set
-# CONFIG_SH_SH4202_MICRODEV is not set
-CONFIG_SH_LANDISK=y
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_SHMIN is not set
-# CONFIG_SH_7206_SOLUTION_ENGINE is not set
-# CONFIG_SH_7619_SOLUTION_ENGINE is not set
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
 CONFIG_CPU_SH4=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
-
-#
-# SH-2A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
-
-#
-# SH-3 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
 # CONFIG_CPU_SUBTYPE_SH7708 is not set
 # CONFIG_CPU_SUBTYPE_SH7709 is not set
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
-
-#
-# SH-4 Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -160,53 +142,60 @@ CONFIG_CPU_SH4=y
 CONFIG_CPU_SUBTYPE_SH7751R=y
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-
-#
-# ST40 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
 # CONFIG_CPU_SUBTYPE_SH7785 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
 #
+CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_29BIT=y
 CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
 
 #
 # Cache configuration
 #
 # CONFIG_SH_DIRECT_MAPPED is not set
-# CONFIG_SH_WRITETHROUGH is not set
-# CONFIG_SH_OCRAM is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
 
 #
 # Processor features
@@ -214,19 +203,32 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_CPU_LITTLE_ENDIAN=y
 # CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_SH_FPU=y
-# CONFIG_SH_DSP is not set
 # CONFIG_SH_STORE_QUEUES is not set
 CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_INTC_IRQ=y
 CONFIG_CPU_HAS_SR_RB=y
 CONFIG_CPU_HAS_PTEA=y
+CONFIG_CPU_HAS_FPU=y
 
 #
-# Timer support
+# Board support
+#
+# CONFIG_SH_7751_SYSTEMH is not set
+# CONFIG_SH_SECUREEDGE5410 is not set
+# CONFIG_SH_RTS7751R2D is not set
+CONFIG_SH_LANDISK=y
+# CONFIG_SH_TITAN is not set
+# CONFIG_SH_LBOX_RE2 is not set
+
+#
+# Timer and clock configuration
 #
 CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=33333333
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -241,12 +243,11 @@ CONFIG_SH_PCLK_FREQ=33333333
 #
 # Companion Chips
 #
-# CONFIG_HD6446X_SERIES is not set
-CONFIG_HEARTBEAT=y
 
 #
 # Additional SuperH Device Drivers
 #
+CONFIG_HEARTBEAT=y
 # CONFIG_PUSH_SWITCH is not set
 
 #
@@ -254,13 +255,17 @@ CONFIG_HEARTBEAT=y
 #
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_KEXEC=y
-# CONFIG_SMP is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
 
 #
 # Boot options
@@ -273,16 +278,12 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000
 #
 # Bus options
 #
-CONFIG_ISA=y
 CONFIG_PCI=y
 CONFIG_SH_PCIDMA_NONCOHERENT=y
 CONFIG_PCI_AUTO=y
 CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
-# CONFIG_PCI_MULTITHREAD_PROBE is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
 CONFIG_PCCARD=y
 # CONFIG_PCMCIA_DEBUG is not set
 CONFIG_PCMCIA=y
@@ -301,29 +302,16 @@ CONFIG_YENTA_ENE_TUNE=y
 CONFIG_YENTA_TOSHIBA=y
 # CONFIG_PD6729 is not set
 # CONFIG_I82092 is not set
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
-CONFIG_PCMCIA_PROBE=y
 CONFIG_PCCARD_NONSTATIC=y
-
-#
-# PCI Hotplug Support
-#
 # CONFIG_HOTPLUG_PCI is not set
 
 #
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
 # CONFIG_BINFMT_MISC is not set
 
 #
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
-#
 # Networking
 #
 CONFIG_NET=y
@@ -331,13 +319,14 @@ CONFIG_NET=y
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -364,49 +353,36 @@ CONFIG_IP_PNP=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
-
-#
-# IP: Virtual Server Configuration
-#
 # CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
 
 #
 # Core Netfilter Configuration
 #
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
 # CONFIG_NETFILTER_XTABLES is not set
 
 #
 # IP: Netfilter Configuration
 #
 CONFIG_IP_NF_QUEUE=m
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -421,10 +397,6 @@ CONFIG_ATALK=m
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -432,9 +404,20 @@ CONFIG_ATALK=m
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -443,35 +426,17 @@ CONFIG_ATALK=m
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 # CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
 # CONFIG_BLK_DEV_UMEM is not set
@@ -484,63 +449,66 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
 # CONFIG_BLK_DEV_IDECS is not set
+# CONFIG_BLK_DEV_DELKIN is not set
 CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
 CONFIG_BLK_DEV_IDESCSI=y
 # CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
 
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
+
+#
+# PCI IDE chipsets support
+#
 CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
+CONFIG_IDEPCI_PCIBUS_ORDER=y
 CONFIG_BLK_DEV_OFFBOARD=y
 CONFIG_BLK_DEV_GENERIC=y
 # CONFIG_BLK_DEV_OPTI621 is not set
 CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-CONFIG_IDEDMA_ONLYDISK=y
 CONFIG_BLK_DEV_AEC62XX=y
 # CONFIG_BLK_DEV_ALI15X3 is not set
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8213 is not set
 # CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
 # CONFIG_BLK_DEV_PDC202XX_OLD is not set
@@ -550,18 +518,15 @@ CONFIG_BLK_DEV_AEC62XX=y
 # CONFIG_BLK_DEV_SLC90E66 is not set
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
@@ -583,6 +548,7 @@ CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
 # CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
 # SCSI Transports
@@ -590,77 +556,43 @@ CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AHA152X is not set
 # CONFIG_SCSI_AACRAID is not set
 # CONFIG_SCSI_AIC7XXX is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_IN2000 is not set
 # CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_DTC3280 is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 # CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_QLA_ISCSI is not set
 # CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_SYM53C416 is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_T128 is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
-
-#
-# PCMCIA SCSI adapter support
-#
-# CONFIG_PCMCIA_AHA152X is not set
-# CONFIG_PCMCIA_FDOMAIN is not set
-# CONFIG_PCMCIA_NINJA_SCSI is not set
-# CONFIG_PCMCIA_QLOGIC is not set
-# CONFIG_PCMCIA_SYM53C500 is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -671,76 +603,49 @@ CONFIG_MD_RAID1=m
 # CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 # CONFIG_BLK_DEV_DM is not set
-
-#
-# Fusion MPT device support
-#
 # CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
-# CONFIG_IEEE1394 is not set
 
 #
-# I2O device support
+# Enable only one of the two stacks, unless you know what you are doing
 #
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
-
-#
-# ARCnet devices
-#
+# CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_SMC is not set
 # CONFIG_SMC91X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-
-#
-# Tulip family network device support
-#
+# CONFIG_SMC911X is not set
 # CONFIG_NET_TULIP is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
 # CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_AC3200 is not set
-# CONFIG_APRICOT is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_DGRS is not set
 # CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
@@ -748,18 +653,20 @@ CONFIG_NET_PCI=y
 # CONFIG_NE2K_PCI is not set
 CONFIG_8139CP=y
 # CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
+# CONFIG_SC92031 is not set
+CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -767,58 +674,53 @@ CONFIG_8139CP=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
-
-#
-# Ethernet (10000 Mbit)
-#
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
-
-#
-# Token Ring devices
-#
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
-# Wireless LAN (non-hamradio)
+# Wireless LAN
 #
-# CONFIG_NET_RADIO is not set
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
-# PCMCIA network device support
+# USB Network Adapters
 #
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+# CONFIG_USB_USBNET is not set
 # CONFIG_NET_PCMCIA is not set
-
-#
-# Wan interfaces
-#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -826,6 +728,7 @@ CONFIG_8139CP=y
 #
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -835,7 +738,6 @@ CONFIG_INPUT_MOUSEDEV=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -845,6 +747,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -858,10 +761,13 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -880,22 +786,10 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
 
 #
 # PCMCIA character devices
@@ -903,65 +797,77 @@ CONFIG_HW_RANDOM=y
 # CONFIG_SYNCLINK_CS is not set
 # CONFIG_CARDMAN_4000 is not set
 # CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
 # CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
+# CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-CONFIG_VIDEO_V4L2=y
 
 #
-# Video Capture Adapters
+# Multimedia core support
 #
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=m
 
 #
-# Video Capture Adapters
+# Multimedia drivers
 #
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L1=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
 # CONFIG_VIDEO_ADV_DEBUG is not set
 CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
 # CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_PMS is not set
 # CONFIG_VIDEO_CPIA is not set
 # CONFIG_VIDEO_CPIA2 is not set
-# CONFIG_VIDEO_STRADIS is not set
-
-#
-# V4L USB devices
-#
+CONFIG_V4L_USB_DRIVERS=y
+# CONFIG_USB_VIDEO_CLASS is not set
+# CONFIG_USB_GSPCA is not set
 CONFIG_VIDEO_USBVIDEO=m
 CONFIG_USB_VICAM=m
 CONFIG_USB_IBMCAM=m
@@ -975,106 +881,100 @@ CONFIG_USB_STV680=m
 # CONFIG_USB_ZC0301 is not set
 CONFIG_USB_PWC=m
 # CONFIG_USB_PWC_DEBUG is not set
-
-#
-# Radio Adapters
-#
-# CONFIG_RADIO_CADET is not set
-# CONFIG_RADIO_RTRACK is not set
-# CONFIG_RADIO_RTRACK2 is not set
-# CONFIG_RADIO_AZTECH is not set
-# CONFIG_RADIO_GEMTEK is not set
+# CONFIG_USB_ZR364XX is not set
+# CONFIG_USB_STKWEBCAM is not set
+# CONFIG_USB_S2255 is not set
+# CONFIG_SOC_CAMERA is not set
+# CONFIG_VIDEO_SH_MOBILE_CEU is not set
+CONFIG_RADIO_ADAPTERS=y
 # CONFIG_RADIO_GEMTEK_PCI is not set
 # CONFIG_RADIO_MAXIRADIO is not set
 # CONFIG_RADIO_MAESTRO is not set
-# CONFIG_RADIO_SF16FMI is not set
-# CONFIG_RADIO_SF16FMR2 is not set
-# CONFIG_RADIO_TERRATEC is not set
-# CONFIG_RADIO_TRUST is not set
-# CONFIG_RADIO_TYPHOON is not set
-# CONFIG_RADIO_ZOLTRIX is not set
 CONFIG_USB_DSBR=m
+# CONFIG_USB_SI470X is not set
+# CONFIG_DAB is not set
 
 #
-# Digital Video Broadcasting Devices
+# Graphics support
 #
-# CONFIG_DVB is not set
-CONFIG_USB_DABUSB=m
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Graphics support
+# Display device support
 #
-CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB is not set
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
 #
-# CONFIG_MDA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FONT_8x16=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
 # CONFIG_SND is not set
+CONFIG_SOUND_PRIME=m
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
 
 #
-# Open Sound System
+# USB Input Devices
 #
-CONFIG_SOUND_PRIME=m
-# CONFIG_OSS_OBSOLETE_DRIVER is not set
-# CONFIG_SOUND_BT878 is not set
-# CONFIG_SOUND_ES1371 is not set
-# CONFIG_SOUND_ICH is not set
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
-# CONFIG_SOUND_VIA82CXXX is not set
+CONFIG_USB_HID=m
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
 
 #
-# USB support
+# USB HID Boot Protocol drivers
 #
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
 #
 CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
+CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_MULTITHREAD_PROBE is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
 
 #
 # USB Device Class drivers
 #
 # CONFIG_USB_ACM is not set
 CONFIG_USB_PRINTER=m
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1094,66 +994,28 @@ CONFIG_USB_STORAGE_SDDR09=y
 CONFIG_USB_STORAGE_SDDR55=y
 CONFIG_USB_STORAGE_JUMPSHOT=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-CONFIG_USB_HIDINPUT=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
 # USB Imaging devices
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
 CONFIG_USB_MON=y
 
 #
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 CONFIG_USB_SERIAL=m
+# CONFIG_USB_EZUSB is not set
 # CONFIG_USB_SERIAL_GENERIC is not set
 # CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
 # CONFIG_USB_SERIAL_ARK3116 is not set
 # CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
 # CONFIG_USB_SERIAL_WHITEHEAT is not set
 # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
 # CONFIG_USB_SERIAL_CP2101 is not set
@@ -1168,6 +1030,7 @@ CONFIG_USB_SERIAL_FTDI_SIO=m
 # CONFIG_USB_SERIAL_EDGEPORT_TI is not set
 # CONFIG_USB_SERIAL_GARMIN is not set
 # CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IUU is not set
 # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
 # CONFIG_USB_SERIAL_KEYSPAN is not set
 # CONFIG_USB_SERIAL_KLSI is not set
@@ -1175,8 +1038,11 @@ CONFIG_USB_SERIAL_FTDI_SIO=m
 # CONFIG_USB_SERIAL_MCT_U232 is not set
 # CONFIG_USB_SERIAL_MOS7720 is not set
 # CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
 # CONFIG_USB_SERIAL_NAVMAN is not set
 CONFIG_USB_SERIAL_PL2303=m
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
 # CONFIG_USB_SERIAL_HP4X is not set
 # CONFIG_USB_SERIAL_SAFE is not set
 # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
@@ -1197,6 +1063,7 @@ CONFIG_USB_EMI26=m
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -1208,61 +1075,18 @@ CONFIG_USB_SISUSBVGA=m
 CONFIG_USB_SISUSBVGA_CON=y
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
 # CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -1276,7 +1100,6 @@ CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_SECURITY is not set
 # CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 CONFIG_REISERFS_FS=y
 # CONFIG_REISERFS_CHECK is not set
@@ -1285,14 +1108,11 @@ CONFIG_REISERFS_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -1328,7 +1148,6 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1343,26 +1162,24 @@ CONFIG_RAMFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
 # CONFIG_SYSV_FS is not set
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
 # CONFIG_UFS_DEBUG is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
 CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
@@ -1376,17 +1193,12 @@ CONFIG_SMB_FS=m
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
@@ -1427,46 +1239,128 @@ CONFIG_NLS_CODEPAGE_932=y
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_DLM is not set
 
 #
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_SAMPLES is not set
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_EARLY_PRINTK is not set
-# CONFIG_KGDB is not set
+# CONFIG_SH_KGDB is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
 
 #
-# Cryptographic options
+# Compression
 #
-# CONFIG_CRYPTO is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/lboxre2_defconfig b/arch/sh/configs/lboxre2_defconfig
index b68b6cdbb78f..aecdfd33c695 100644
--- a/arch/sh/configs/lboxre2_defconfig
+++ b/arch/sh/configs/lboxre2_defconfig
@@ -1,9 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-rc4
-# Sat Mar 24 22:04:27 2007
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:39:41 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -11,37 +13,40 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-# CONFIG_GENERIC_TIME is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
@@ -54,34 +59,48 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -95,66 +114,26 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System type
 #
-# CONFIG_SH_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-# CONFIG_SH_7343_SOLUTION_ENGINE is not set
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-# CONFIG_SH_7710VOIPGW is not set
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_HIGHLANDER is not set
-# CONFIG_SH_EDOSK7705 is not set
-# CONFIG_SH_SH4202_MICRODEV is not set
-# CONFIG_SH_LANDISK is not set
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_SHMIN is not set
-# CONFIG_SH_7206_SOLUTION_ENGINE is not set
-# CONFIG_SH_7619_SOLUTION_ENGINE is not set
-CONFIG_SH_LBOX_RE2=y
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
 CONFIG_CPU_SH4=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
-
-#
-# SH-2A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
-
-#
-# SH-3 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
 # CONFIG_CPU_SUBTYPE_SH7708 is not set
 # CONFIG_CPU_SUBTYPE_SH7709 is not set
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
-
-#
-# SH-4 Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -163,55 +142,60 @@ CONFIG_CPU_SH4=y
 CONFIG_CPU_SUBTYPE_SH7751R=y
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-
-#
-# ST40 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
 # CONFIG_CPU_SUBTYPE_SH7785 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
 #
+CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_29BIT=y
 CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
 
 #
 # Cache configuration
 #
 # CONFIG_SH_DIRECT_MAPPED is not set
-# CONFIG_SH_WRITETHROUGH is not set
-# CONFIG_SH_OCRAM is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
 
 #
 # Processor features
@@ -219,12 +203,21 @@ CONFIG_ZONE_DMA_FLAG=0
 CONFIG_CPU_LITTLE_ENDIAN=y
 # CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_SH_FPU=y
-# CONFIG_SH_DSP is not set
 # CONFIG_SH_STORE_QUEUES is not set
 CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_INTC_IRQ=y
 CONFIG_CPU_HAS_SR_RB=y
 CONFIG_CPU_HAS_PTEA=y
+CONFIG_CPU_HAS_FPU=y
+
+#
+# Board support
+#
+# CONFIG_SH_7751_SYSTEMH is not set
+# CONFIG_SH_SECUREEDGE5410 is not set
+# CONFIG_SH_RTS7751R2D is not set
+# CONFIG_SH_LANDISK is not set
+# CONFIG_SH_TITAN is not set
+CONFIG_SH_LBOX_RE2=y
 
 #
 # Timer and clock configuration
@@ -232,6 +225,10 @@ CONFIG_CPU_HAS_PTEA=y
 CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=40000000
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -246,7 +243,6 @@ CONFIG_SH_PCLK_FREQ=40000000
 #
 # Companion Chips
 #
-# CONFIG_HD6446X_SERIES is not set
 
 #
 # Additional SuperH Device Drivers
@@ -262,11 +258,14 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_KEXEC=y
-# CONFIG_SMP is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
 
 #
 # Boot options
@@ -280,15 +279,12 @@ CONFIG_CMDLINE="console=ttySC1,115200 root=/dev/sda1"
 #
 # Bus options
 #
-CONFIG_ISA=y
 CONFIG_PCI=y
 CONFIG_SH_PCIDMA_NONCOHERENT=y
 CONFIG_PCI_AUTO=y
 CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
 CONFIG_PCCARD=y
 CONFIG_PCMCIA_DEBUG=y
 CONFIG_PCMCIA=y
@@ -306,29 +302,16 @@ CONFIG_YENTA_O2=y
 # CONFIG_YENTA_TOSHIBA is not set
 # CONFIG_PD6729 is not set
 # CONFIG_I82092 is not set
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
-CONFIG_PCMCIA_PROBE=y
 CONFIG_PCCARD_NONSTATIC=y
-
-#
-# PCI Hotplug Support
-#
 # CONFIG_HOTPLUG_PCI is not set
 
 #
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
 # CONFIG_BINFMT_MISC is not set
 
 #
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
-#
 # Networking
 #
 CONFIG_NET=y
@@ -336,7 +319,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -344,6 +326,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -370,29 +353,26 @@ CONFIG_IP_PNP=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
-
-#
-# IP: Virtual Server Configuration
-#
 # CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
 
 #
 # Core Netfilter Configuration
 #
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
 # CONFIG_NETFILTER_XTABLES is not set
 
 #
@@ -401,20 +381,8 @@ CONFIG_NETFILTER=y
 # CONFIG_IP_NF_QUEUE is not set
 # CONFIG_IP_NF_IPTABLES is not set
 # CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -427,10 +395,6 @@ CONFIG_NETFILTER=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -438,9 +402,20 @@ CONFIG_NETFILTER=y
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -449,36 +424,17 @@ CONFIG_NETFILTER=y
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 # CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
 # CONFIG_BLK_DEV_UMEM is not set
@@ -490,19 +446,18 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -510,6 +465,7 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
@@ -531,6 +487,7 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
 # CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
 # SCSI Transports
@@ -538,71 +495,49 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AHA152X is not set
 # CONFIG_SCSI_AACRAID is not set
 # CONFIG_SCSI_AIC7XXX is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_IN2000 is not set
 # CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_DTC3280 is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 # CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_QLA_ISCSI is not set
 # CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_SYM53C416 is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_T128 is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
-
-#
-# PCMCIA SCSI adapter support
-#
-# CONFIG_PCMCIA_AHA152X is not set
-# CONFIG_PCMCIA_FDOMAIN is not set
-# CONFIG_PCMCIA_NINJA_SCSI is not set
-# CONFIG_PCMCIA_QLOGIC is not set
-# CONFIG_PCMCIA_SYM53C500 is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
@@ -612,7 +547,6 @@ CONFIG_ATA=y
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
 # CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
@@ -622,6 +556,7 @@ CONFIG_ATA=y
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
 # CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
 # CONFIG_PATA_CMD64X is not set
 # CONFIG_PATA_CS5520 is not set
 # CONFIG_PATA_CS5530 is not set
@@ -635,18 +570,18 @@ CONFIG_ATA=y
 # CONFIG_PATA_IT821X is not set
 # CONFIG_PATA_IT8213 is not set
 # CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_LEGACY is not set
 # CONFIG_PATA_TRIFLEX is not set
 # CONFIG_PATA_MARVELL is not set
 # CONFIG_PATA_MPIIX is not set
 # CONFIG_PATA_OLDPIIX is not set
 # CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
 # CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
 # CONFIG_PATA_OPTIDMA is not set
 # CONFIG_PATA_PCMCIA is not set
 # CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_QDI is not set
 # CONFIG_PATA_RADISYS is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
@@ -656,88 +591,52 @@ CONFIG_ATA=y
 # CONFIG_PATA_SIS is not set
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_WINBOND_VLB is not set
 CONFIG_PATA_PLATFORM=y
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
 # CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
-# CONFIG_IEEE1394 is not set
 
 #
-# I2O device support
+# Enable only one of the two stacks, unless you know what you are doing
 #
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
+# CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_SMC is not set
 # CONFIG_SMC91X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-
-#
-# Tulip family network device support
-#
+# CONFIG_SMC911X is not set
 # CONFIG_NET_TULIP is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
 # CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_AC3200 is not set
-# CONFIG_APRICOT is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_DGRS is not set
 # CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
@@ -749,19 +648,20 @@ CONFIG_8139TOO_PIO=y
 CONFIG_8139TOO_TUNE_TWISTER=y
 # CONFIG_8139TOO_8129 is not set
 # CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
+CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -769,36 +669,33 @@ CONFIG_8139TOO_TUNE_TWISTER=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
+# CONFIG_ATL1E is not set
+CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
-
-#
-# Token Ring devices
-#
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# PCMCIA network device support
+# Wireless LAN
 #
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 CONFIG_NET_PCMCIA=y
 # CONFIG_PCMCIA_3C589 is not set
 # CONFIG_PCMCIA_3C574 is not set
@@ -808,29 +705,16 @@ CONFIG_PCMCIA_PCNET=y
 # CONFIG_PCMCIA_SMC91C92 is not set
 # CONFIG_PCMCIA_XIRC2PS is not set
 # CONFIG_PCMCIA_AXNET is not set
-
-#
-# Wan interfaces
-#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -838,6 +722,7 @@ CONFIG_PCMCIA_PCNET=y
 #
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -847,7 +732,6 @@ CONFIG_INPUT_MOUSEDEV=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -857,6 +741,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -870,10 +755,13 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -892,22 +780,10 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
 
 #
 # PCMCIA character devices
@@ -915,125 +791,104 @@ CONFIG_HW_RANDOM=y
 # CONFIG_SYNCLINK_CS is not set
 # CONFIG_CARDMAN_4000 is not set
 # CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
 # CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
+# CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multimedia drivers
 #
-# CONFIG_DVB is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Console display driver support
+# Display device support
 #
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
-# Sound
+# Console display driver support
 #
+CONFIG_DUMMY_CONSOLE=y
 # CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
+CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
+# CONFIG_HIDRAW is not set
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1047,37 +902,29 @@ CONFIG_RTC_INTF_SYSFS=y
 CONFIG_RTC_INTF_PROC=y
 CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-
-#
-# RTC drivers
-#
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_SH is not set
 # CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
 
 #
-# DMA Devices
+# SPI RTC drivers
 #
 
 #
-# Auxiliary Display support
+# Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
 
 #
-# Virtualization
+# on-CPU RTC drivers
 #
+# CONFIG_RTC_DRV_SH is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -1091,20 +938,16 @@ CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_SECURITY is not set
 # CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -1136,7 +979,6 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1151,14 +993,14 @@ CONFIG_RAMFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
 # CONFIG_SMB_FS is not set
@@ -1166,17 +1008,12 @@ CONFIG_RAMFS=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
@@ -1217,30 +1054,24 @@ CONFIG_NLS_CODEPAGE_437=y
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_SAMPLES is not set
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_EARLY_PRINTK is not set
@@ -1251,20 +1082,100 @@ CONFIG_SH_STANDARD_BIOS=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
 
 #
-# Cryptographic options
+# Compression
 #
-# CONFIG_CRYPTO is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/magicpanelr2_defconfig b/arch/sh/configs/magicpanelr2_defconfig
index f8398a5f10ee..a3a80f3d27c0 100644
--- a/arch/sh/configs/magicpanelr2_defconfig
+++ b/arch/sh/configs/magicpanelr2_defconfig
@@ -1,9 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc2
-# Fri Aug 17 12:15:16 2007
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:41:08 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -18,6 +20,7 @@ CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -35,12 +38,16 @@ CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
 CONFIG_AUDIT=y
+# CONFIG_AUDITSYSCALL is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -48,6 +55,7 @@ CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -55,6 +63,7 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
@@ -67,10 +76,24 @@ CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
@@ -81,6 +104,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -94,13 +118,17 @@ CONFIG_IOSCHED_NOOP=y
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System type
 #
 CONFIG_CPU_SH3=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -109,6 +137,7 @@ CONFIG_CPU_SH3=y
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
 # CONFIG_CPU_SUBTYPE_SH7712 is not set
 CONFIG_CPU_SUBTYPE_SH7720=y
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -117,14 +146,17 @@ CONFIG_CPU_SUBTYPE_SH7720=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
 # CONFIG_CPU_SUBTYPE_SH7785 is not set
 # CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -134,6 +166,7 @@ CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x0C000000
 CONFIG_MEMORY_SIZE=0x03F00000
+CONFIG_29BIT=y
 CONFIG_VSYSCALL=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
@@ -143,7 +176,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -151,6 +186,8 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
@@ -173,7 +210,6 @@ CONFIG_CPU_LITTLE_ENDIAN=y
 CONFIG_SH_DSP=y
 CONFIG_SH_ADC=y
 CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_INTC_IRQ=y
 CONFIG_CPU_HAS_SR_RB=y
 CONFIG_CPU_HAS_DSP=y
 
@@ -196,6 +232,7 @@ CONFIG_SH_PCLK_FREQ=24000000
 # CONFIG_TICK_ONESHOT is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -228,11 +265,14 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
 
 #
 # Boot options
@@ -245,10 +285,6 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000
 # Bus options
 #
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 # CONFIG_PCCARD is not set
 
 #
@@ -289,6 +325,7 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -296,8 +333,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -314,10 +349,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -325,6 +356,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -346,9 +378,12 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -362,6 +397,7 @@ CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
 # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
 CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -374,6 +410,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -408,7 +445,6 @@ CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_PHYSMAP_START=0x0000000
 CONFIG_MTD_PHYSMAP_LEN=0
 CONFIG_MTD_PHYSMAP_BANKWIDTH=0
-# CONFIG_MTD_SOLUTIONENGINE is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -440,11 +476,14 @@ CONFIG_BLK_DEV=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -457,18 +496,24 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 # CONFIG_SMC91X is not set
 CONFIG_SMC911X=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 
@@ -477,10 +522,10 @@ CONFIG_SMC911X=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -502,7 +547,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
@@ -516,6 +560,7 @@ CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SH_KEYSC is not set
 CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
 # CONFIG_MOUSE_SERIAL is not set
@@ -539,9 +584,11 @@ CONFIG_SERIO_LIBPS2=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -569,60 +616,72 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 
 #
 # Graphics support
 #
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
 
 #
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 # CONFIG_RTC_HCTOSYS is not set
@@ -644,9 +703,10 @@ CONFIG_RTC_INTF_DEV=y
 #
 # Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
@@ -655,23 +715,7 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_SH=y
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -684,18 +728,14 @@ CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
 # CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -724,7 +764,6 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -744,30 +783,29 @@ CONFIG_JFFS2_FS_DEBUG=0
 # CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-CONFIG_SUNRPC_BIND34=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -781,10 +819,6 @@ CONFIG_SUNRPC_BIND34=y
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="cp437"
 CONFIG_NLS_CODEPAGE_437=y
@@ -825,23 +859,16 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -852,6 +879,7 @@ CONFIG_DEBUG_KERNEL=y
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -866,11 +894,16 @@ CONFIG_DEBUG_KOBJECT=y
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
-# CONFIG_FORCED_INLINING is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 CONFIG_EARLY_SCIF_CONSOLE=y
 CONFIG_EARLY_SCIF_CONSOLE_PORT=0xa4430000
@@ -879,6 +912,7 @@ CONFIG_EARLY_PRINTK=y
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
+# CONFIG_IRQSTACKS is not set
 CONFIG_SH_KGDB=y
 
 #
@@ -904,14 +938,17 @@ CONFIG_KGDB_DEFBITS_8=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/microdev_defconfig b/arch/sh/configs/microdev_defconfig
index e89d951c3c16..e4b900e72dcd 100644
--- a/arch/sh/configs/microdev_defconfig
+++ b/arch/sh/configs/microdev_defconfig
@@ -1,28 +1,35 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18
-# Tue Oct  3 11:27:01 2006
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:47:16 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
@@ -31,10 +38,16 @@ CONFIG_SWAP=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
@@ -47,29 +60,42 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 # CONFIG_MODULES is not set
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -83,59 +109,26 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System type
 #
-# CONFIG_SH_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-# CONFIG_SH_7343_SOLUTION_ENGINE is not set
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_EC3104 is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_BIGSUR is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-# CONFIG_SH_7710VOIPGW is not set
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_R7780RP is not set
-# CONFIG_SH_EDOSK7705 is not set
-CONFIG_SH_SH4202_MICRODEV=y
-# CONFIG_SH_LANDISK is not set
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_SHMIN is not set
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
 CONFIG_CPU_SH4=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
-
-#
-# SH-3 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
 # CONFIG_CPU_SUBTYPE_SH7708 is not set
 # CONFIG_CPU_SUBTYPE_SH7709 is not set
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
-
-#
-# SH-4 Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -144,67 +137,94 @@ CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 CONFIG_CPU_SUBTYPE_SH4_202=y
-
-#
-# ST40 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
 #
+CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x08000000
 CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_29BIT=y
 CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_HUGETLB_PAGE_SIZE_64K=y
+# CONFIG_HUGETLB_PAGE_SIZE_256K is not set
 # CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_4MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_64MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_512MB is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
 
 #
 # Cache configuration
 #
 # CONFIG_SH_DIRECT_MAPPED is not set
-CONFIG_SH_WRITETHROUGH=y
-# CONFIG_SH_OCRAM is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
 
 #
 # Processor features
 #
 CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_SH_FPU=y
-# CONFIG_SH_DSP is not set
 # CONFIG_SH_STORE_QUEUES is not set
 CONFIG_CPU_HAS_INTEVT=y
 CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_PTEA=y
+CONFIG_CPU_HAS_FPU=y
 
 #
-# Timer support
+# Board support
+#
+CONFIG_SH_SH4202_MICRODEV=y
+
+#
+# Timer and clock configuration
 #
 CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=66000000
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -214,6 +234,7 @@ CONFIG_SH_PCLK_FREQ=66000000
 #
 # DMA support
 #
+CONFIG_SH_DMA_API=y
 CONFIG_SH_DMA=y
 CONFIG_NR_ONCHIP_DMA_CHANNELS=4
 # CONFIG_NR_DMA_CHANNELS_BOOL is not set
@@ -221,22 +242,30 @@ CONFIG_NR_ONCHIP_DMA_CHANNELS=4
 #
 # Companion Chips
 #
-# CONFIG_HD6446X_SERIES is not set
+
+#
+# Additional SuperH Device Drivers
+#
 CONFIG_HEARTBEAT=y
+# CONFIG_PUSH_SWITCH is not set
 
 #
 # Kernel features
 #
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
-# CONFIG_SMP is not set
+# CONFIG_CRASH_DUMP is not set
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_PREEMPT_BKL=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
 
 #
 # Boot options
@@ -251,30 +280,16 @@ CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/hda1"
 # Bus options
 #
 CONFIG_SUPERHYWAY=y
-# CONFIG_PCI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
 
 #
-# PCI Hotplug Support
-#
-
-#
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
 # CONFIG_BINFMT_MISC is not set
 
 #
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
-#
 # Networking
 #
 CONFIG_NET=y
@@ -282,12 +297,13 @@ CONFIG_NET=y
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 # CONFIG_PACKET is not set
 # CONFIG_UNIX is not set
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -308,30 +324,19 @@ CONFIG_IP_PNP=y
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -344,10 +349,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -355,9 +356,20 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -366,159 +378,96 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 # CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_IDE_MAX_HWIFS=1
 CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
 CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
 # CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
 
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# PHY device support
-#
+# CONFIG_VETH is not set
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 CONFIG_SMC91X=y
+# CONFIG_SMC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
 
 #
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
+# Wireless LAN
 #
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -536,6 +485,7 @@ CONFIG_SMC91X=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -554,143 +504,93 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-
-#
-# Hardware Monitoring support
-#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# Misc devices
+# Sonics Silicon Backplane
 #
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multimedia drivers
 #
-# CONFIG_DVB is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-CONFIG_FIRMWARE_EDID=y
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Sound
+# Display device support
 #
+# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -702,20 +602,18 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -747,7 +645,6 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -762,21 +659,20 @@ CONFIG_RAMFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
@@ -789,17 +685,12 @@ CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_CODEPAGE_437 is not set
@@ -840,76 +731,127 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_DLM is not set
 
 #
 # Kernel hacking
 #
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_UNWIND_INFO is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_KGDB is not set
+# CONFIG_SH_KGDB is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
 
 #
-# Cryptographic options
+# Crypto core or helper
 #
-CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
 
 #
-# Hardware crypto devices
+# Compression
 #
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/migor_defconfig b/arch/sh/configs/migor_defconfig
index 287408b2ace6..c4b3e1d8950d 100644
--- a/arch/sh/configs/migor_defconfig
+++ b/arch/sh/configs/migor_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc3
-# Thu May 22 14:30:07 2008
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:44:41 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -77,9 +78,14 @@ CONFIG_PROFILING=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -90,12 +96,13 @@ CONFIG_MODULES=y
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -173,7 +180,9 @@ CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 # CONFIG_FLATMEM_MANUAL is not set
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -216,6 +225,8 @@ CONFIG_CPU_HAS_DSP=y
 #
 # CONFIG_SH_7722_SOLUTION_ENGINE is not set
 CONFIG_SH_MIGOR=y
+CONFIG_SH_MIGOR_QVGA=y
+# CONFIG_SH_MIGOR_RTA_WVGA is not set
 
 #
 # Timer and clock configuration
@@ -362,6 +373,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
@@ -378,6 +390,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
@@ -475,6 +489,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -521,10 +536,10 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -537,6 +552,7 @@ CONFIG_MII=y
 # CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 CONFIG_SMC91X=y
+# CONFIG_SMC911X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -602,6 +618,7 @@ CONFIG_KEYBOARD_SH_KEYSC=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -636,21 +653,35 @@ CONFIG_I2C_BOARDINFO=y
 #
 # I2C Hardware Bus support
 #
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
 # CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
+CONFIG_I2C_SH_MOBILE=y
 # CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
-CONFIG_I2C_SH_MOBILE=y
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -663,6 +694,7 @@ CONFIG_I2C_SH_MOBILE=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -674,6 +706,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 
@@ -710,10 +743,6 @@ CONFIG_SSB_POSSIBLE=y
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -738,7 +767,7 @@ CONFIG_USB_GADGET_SELECTED=y
 # CONFIG_USB_GADGET_ATMEL_USBA is not set
 # CONFIG_USB_GADGET_FSL_USB2 is not set
 # CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_PXA25X is not set
 CONFIG_USB_GADGET_M66592=y
 CONFIG_USB_M66592=y
 CONFIG_SUPERH_BUILT_IN_M66592=y
@@ -757,6 +786,7 @@ CONFIG_USB_GADGET_DUALSPEED=y
 CONFIG_USB_G_SERIAL=y
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -790,6 +820,7 @@ CONFIG_RTC_DRV_RS5C372=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -810,6 +841,7 @@ CONFIG_RTC_DRV_RS5C372=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_SH=y
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -870,6 +902,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -899,6 +932,7 @@ CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 CONFIG_EARLY_SCIF_CONSOLE=y
@@ -955,6 +989,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -994,6 +1032,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/r7780mp_defconfig b/arch/sh/configs/r7780mp_defconfig
index 1a072615ffd4..57a300797584 100644
--- a/arch/sh/configs/r7780mp_defconfig
+++ b/arch/sh/configs/r7780mp_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc4
-# Thu Mar  6 15:39:59 2008
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:51:13 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -84,13 +85,20 @@ CONFIG_PROFILING=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=m
 CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -101,6 +109,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -115,7 +124,6 @@ CONFIG_IOSCHED_NOOP=y
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
 CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
 
 #
 # System type
@@ -126,6 +134,7 @@ CONFIG_CPU_SH4A=y
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -143,6 +152,7 @@ CONFIG_CPU_SH4A=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 CONFIG_CPU_SUBTYPE_SH7780=y
@@ -173,7 +183,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_HUGETLB_PAGE_SIZE_64K=y
 # CONFIG_HUGETLB_PAGE_SIZE_256K is not set
 # CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
@@ -188,6 +200,7 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
@@ -268,7 +281,7 @@ CONFIG_KEXEC=y
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_RCU_TRACE=y
+# CONFIG_PREEMPT_RCU is not set
 CONFIG_GUSA=y
 
 #
@@ -348,14 +361,13 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
+CONFIG_STP=m
 CONFIG_BRIDGE=m
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
@@ -384,6 +396,7 @@ CONFIG_LLC=m
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
@@ -400,6 +413,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -420,12 +435,14 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 CONFIG_EEPROM_93CX6=y
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -499,9 +516,13 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
@@ -511,7 +532,6 @@ CONFIG_ATA=y
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
 CONFIG_SATA_SIL=y
-# CONFIG_SATA_SIL24 is not set
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
@@ -556,17 +576,21 @@ CONFIG_SATA_SIL=y
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 CONFIG_PATA_PLATFORM=y
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -585,6 +609,7 @@ CONFIG_AX88796_93CX6=y
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
+# CONFIG_SMC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -593,7 +618,6 @@ CONFIG_AX88796_93CX6=y
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 CONFIG_NET_PCI=y
 CONFIG_PCNET32=m
-# CONFIG_PCNET32_NAPI is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
@@ -616,32 +640,28 @@ CONFIG_8139TOO_8129=y
 # CONFIG_TLAN is not set
 CONFIG_VIA_RHINE=m
 CONFIG_VIA_RHINE_MMIO=y
-# CONFIG_VIA_RHINE_NAPI is not set
 # CONFIG_SC92031 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 CONFIG_E1000=m
-# CONFIG_E1000_NAPI is not set
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 CONFIG_R8169=y
-# CONFIG_R8169_NAPI is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -654,6 +674,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -661,6 +682,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -701,6 +723,7 @@ CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SH_KEYSC is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -722,6 +745,7 @@ CONFIG_SERIO_LIBPS2=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -750,12 +774,7 @@ CONFIG_HW_RANDOM=y
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -776,6 +795,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 CONFIG_THERMAL=y
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -787,13 +807,24 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 
 #
@@ -809,24 +840,9 @@ CONFIG_DAB=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
 # CONFIG_SND is not set
-
-#
-# Open Sound System
-#
 CONFIG_SOUND_PRIME=m
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
@@ -836,6 +852,8 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -844,6 +862,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
@@ -879,10 +898,7 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_SH=y
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -903,7 +919,6 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -957,6 +972,7 @@ CONFIG_CONFIGFS_FS=m
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -967,20 +983,17 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1043,6 +1056,7 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -1050,9 +1064,12 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_PREEMPT is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1066,6 +1083,8 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_FRAME_POINTER is not set
@@ -1091,51 +1110,84 @@ CONFIG_DEBUG_STACKOVERFLOW=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
@@ -1144,8 +1196,10 @@ CONFIG_CRYPTO_HW=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/r7785rp_defconfig b/arch/sh/configs/r7785rp_defconfig
index 0dc1ce7b9349..1d09d24d4298 100644
--- a/arch/sh/configs/r7785rp_defconfig
+++ b/arch/sh/configs/r7785rp_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc3
-# Fri Nov 23 14:03:57 2007
+# Linux kernel version: 2.6.26
+# Wed Jul 30 00:59:19 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -21,6 +22,8 @@ CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_IO_TRAPPED=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -39,18 +42,16 @@ CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
@@ -64,20 +65,37 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
 CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -88,6 +106,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -101,6 +120,7 @@ CONFIG_IOSCHED_NOOP=y
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System type
@@ -109,7 +129,10 @@ CONFIG_CPU_SH4=y
 CONFIG_CPU_SH4A=y
 CONFIG_CPU_SHX2=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -118,6 +141,7 @@ CONFIG_CPU_SHX2=y
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
 # CONFIG_CPU_SUBTYPE_SH7712 is not set
 # CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -126,12 +150,15 @@ CONFIG_CPU_SHX2=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
 CONFIG_CPU_SUBTYPE_SH7785=y
 # CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
 # CONFIG_CPU_SUBTYPE_SH5_101 is not set
 # CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
@@ -157,7 +184,9 @@ CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 # CONFIG_HUGETLB_PAGE_SIZE_64K is not set
 # CONFIG_HUGETLB_PAGE_SIZE_256K is not set
 CONFIG_HUGETLB_PAGE_SIZE_1MB=y
@@ -173,6 +202,7 @@ CONFIG_HAVE_MEMORY_PRESENT=y
 CONFIG_SPARSEMEM_STATIC=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 # CONFIG_MEMORY_HOTPLUG is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
@@ -202,6 +232,7 @@ CONFIG_CPU_HAS_FPU=y
 # Board support
 #
 CONFIG_SH_HIGHLANDER=y
+# CONFIG_SH_SH7785LCR is not set
 # CONFIG_SH_R7780RP is not set
 # CONFIG_SH_R7780MP is not set
 CONFIG_SH_R7785RP=y
@@ -245,12 +276,13 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_KEXEC=y
 # CONFIG_CRASH_DUMP is not set
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_PREEMPT_BKL=y
+# CONFIG_PREEMPT_RCU is not set
 CONFIG_GUSA=y
 
 #
@@ -295,6 +327,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -329,14 +362,13 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
+CONFIG_STP=m
 CONFIG_BRIDGE=m
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
@@ -355,6 +387,7 @@ CONFIG_LLC=m
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -364,6 +397,7 @@ CONFIG_LLC=m
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
@@ -380,6 +414,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -397,14 +433,18 @@ CONFIG_BLK_DEV=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 CONFIG_EEPROM_93CX6=y
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -464,6 +504,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -476,9 +517,13 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
@@ -488,7 +533,6 @@ CONFIG_ATA=y
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
 CONFIG_SATA_SIL=y
-# CONFIG_SATA_SIL24 is not set
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
@@ -517,6 +561,7 @@ CONFIG_SATA_SIL=y
 # CONFIG_PATA_MPIIX is not set
 # CONFIG_PATA_OLDPIIX is not set
 # CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
 # CONFIG_PATA_NS87410 is not set
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
@@ -532,24 +577,27 @@ CONFIG_SATA_SIL=y
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 CONFIG_PATA_PLATFORM=y
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
 # CONFIG_ARCNET is not set
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
@@ -576,20 +624,21 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 CONFIG_R8169=y
-# CONFIG_R8169_NAPI is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -601,6 +650,8 @@ CONFIG_NETDEV_10000=y
 # CONFIG_NIU is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -608,13 +659,13 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -649,6 +700,7 @@ CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SH_KEYSC is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -670,7 +722,9 @@ CONFIG_SERIO_LIBPS2=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -697,12 +751,7 @@ CONFIG_HW_RANDOM=y
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -722,6 +771,8 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -733,13 +784,24 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -751,15 +813,15 @@ CONFIG_SSB_POSSIBLE=y
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
+CONFIG_FB_CFB_FILLRECT=m
+CONFIG_FB_CFB_COPYAREA=m
+CONFIG_FB_CFB_IMAGEBLIT=m
 # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -792,6 +854,8 @@ CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+CONFIG_FB_SH_MOBILE_LCDC=m
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
@@ -800,24 +864,9 @@ CONFIG_FB_DEFERRED_IO=y
 #
 # CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_LOGO is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
 # CONFIG_SND is not set
-
-#
-# Open Sound System
-#
 CONFIG_SOUND_PRIME=m
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
@@ -827,17 +876,17 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
@@ -861,9 +910,10 @@ CONFIG_RTC_INTF_DEV=y
 #
 # Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
@@ -872,10 +922,7 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_SH=y
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -896,14 +943,11 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=m
@@ -951,8 +995,11 @@ CONFIG_CONFIGFS_FS=m
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -960,20 +1007,17 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1028,10 +1072,6 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
@@ -1040,6 +1080,7 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -1050,6 +1091,7 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_PREEMPT is not set
 CONFIG_DEBUG_SPINLOCK=y
@@ -1066,12 +1108,14 @@ CONFIG_STACKTRACE=y
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
 CONFIG_SH_STANDARD_BIOS=y
@@ -1091,54 +1135,96 @@ CONFIG_4KSTACKS=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
 # CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/rsk7203_defconfig b/arch/sh/configs/rsk7203_defconfig
index a0ebd439cbd2..840fe3843ffa 100644
--- a/arch/sh/configs/rsk7203_defconfig
+++ b/arch/sh/configs/rsk7203_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Tue Jun  3 13:02:42 2008
+# Linux kernel version: 2.6.26
+# Mon Jul 28 22:23:03 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -33,21 +33,22 @@ CONFIG_LOCALVERSION=""
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
+CONFIG_IKCONFIG=y
+# CONFIG_IKCONFIG_PROC is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -72,26 +73,36 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
+# CONFIG_SLAB is not set
 # CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
+CONFIG_SLOB=y
 CONFIG_PROFILING=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_SLABINFO=y
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+# CONFIG_MODULE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -162,7 +173,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -196,6 +209,7 @@ CONFIG_CPU_HAS_FPU=y
 #
 # Board support
 #
+CONFIG_SH_RSK7203=y
 
 #
 # Timer and clock configuration
@@ -274,6 +288,7 @@ CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ignore_loglevel"
 #
 # Executable file formats
 #
+CONFIG_BINFMT_ELF_FDPIC=y
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
 CONFIG_BINFMT_SHARED_FLAT=y
@@ -424,8 +439,8 @@ CONFIG_MTD_CFI_UTIL=y
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x20000000
-CONFIG_MTD_PHYSMAP_LEN=0x01000000
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
 CONFIG_MTD_PHYSMAP_BANKWIDTH=4
 # CONFIG_MTD_UCLINUX is not set
 # CONFIG_MTD_PLATRAM is not set
@@ -456,9 +471,11 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -475,7 +492,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -487,15 +503,15 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
-CONFIG_SMC91X=y
+# CONFIG_SMC91X is not set
+CONFIG_SMC911X=y
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 # CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
-CONFIG_NETDEV_10000=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
 # Wireless LAN
@@ -503,6 +519,15 @@ CONFIG_NETDEV_10000=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -587,6 +612,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 
@@ -605,6 +631,7 @@ CONFIG_SSB_POSSIBLE=y
 # Multimedia drivers
 #
 CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
 
 #
 # Graphics support
@@ -618,26 +645,96 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+CONFIG_USB_R8A66597_HCD=y
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -677,6 +774,7 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_SH=y
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -734,6 +832,7 @@ CONFIG_SYSFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
@@ -743,12 +842,11 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -775,16 +873,20 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_OBJECTS=y
+# CONFIG_DEBUG_OBJECTS_SELFTEST is not set
+# CONFIG_DEBUG_OBJECTS_FREE is not set
+# CONFIG_DEBUG_OBJECTS_TIMERS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -797,12 +899,14 @@ CONFIG_DEBUG_SPINLOCK_SLEEP=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
+CONFIG_DEBUG_VM=y
+CONFIG_DEBUG_WRITECOUNT=y
+# CONFIG_DEBUG_MEMORY_INIT is not set
+CONFIG_DEBUG_LIST=y
+CONFIG_DEBUG_SG=y
 CONFIG_FRAME_POINTER=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
@@ -830,6 +934,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/rts7751r2d1_defconfig b/arch/sh/configs/rts7751r2d1_defconfig
index 3a915fd436d9..8413236c1b37 100644
--- a/arch/sh/configs/rts7751r2d1_defconfig
+++ b/arch/sh/configs/rts7751r2d1_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24
-# Thu Feb  7 16:25:55 2008
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:55:52 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -20,6 +21,8 @@ CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_IO_TRAPPED=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -36,17 +39,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
@@ -76,22 +77,31 @@ CONFIG_PROFILING=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -106,7 +116,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
 
 #
 # System type
@@ -116,6 +125,7 @@ CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -133,6 +143,7 @@ CONFIG_CPU_SH4=y
 CONFIG_CPU_SUBTYPE_SH7751R=y
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -140,6 +151,7 @@ CONFIG_CPU_SUBTYPE_SH7751R=y
 # CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
 # CONFIG_CPU_SUBTYPE_SH5_101 is not set
 # CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
@@ -161,7 +173,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -170,6 +184,7 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
@@ -256,7 +271,6 @@ CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_RCU_TRACE=y
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
 
@@ -332,8 +346,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -367,6 +379,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
@@ -383,6 +396,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
@@ -399,14 +414,18 @@ CONFIG_BLK_DEV=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -466,6 +485,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -478,9 +498,13 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
@@ -490,7 +514,6 @@ CONFIG_ATA=y
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
 # CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
@@ -535,17 +558,21 @@ CONFIG_ATA=y
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 CONFIG_PATA_PLATFORM=y
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -564,6 +591,7 @@ CONFIG_MII=y
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
 # CONFIG_ENC28J60 is not set
+# CONFIG_SMC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -599,7 +627,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -609,12 +636,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -627,6 +654,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -634,6 +662,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -690,9 +719,11 @@ CONFIG_INPUT=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -726,10 +757,6 @@ CONFIG_HW_RANDOM=y
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
 CONFIG_SPI_MASTER=y
 
@@ -765,6 +792,8 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -776,13 +805,24 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 CONFIG_MFD_SM501=y
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 # CONFIG_USB_DABUSB is not set
 
@@ -802,8 +842,8 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -836,6 +876,8 @@ CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+CONFIG_FB_SH_MOBILE_LCDC=m
 CONFIG_FB_SM501=y
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
@@ -862,15 +904,7 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_SUPERH_MONO is not set
 # CONFIG_LOGO_SUPERH_VGA16 is not set
 CONFIG_LOGO_SUPERH_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -884,21 +918,17 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_VMASTER=y
 CONFIG_SND_MPU401_UART=m
 CONFIG_SND_OPL3_LIB=m
 CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALI5451 is not set
@@ -907,6 +937,7 @@ CONFIG_SND_AC97_CODEC=m
 # CONFIG_SND_AU8810 is not set
 # CONFIG_SND_AU8820 is not set
 # CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
 # CONFIG_SND_AZT3328 is not set
 # CONFIG_SND_BT87X is not set
 # CONFIG_SND_CA0106 is not set
@@ -957,43 +988,13 @@ CONFIG_SND_AC97_CODEC=m
 # CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 CONFIG_SND_YMFPCI=m
-CONFIG_SND_YMFPCI_FIRMWARE_IN_KERNEL=y
-# CONFIG_SND_AC97_POWER_SAVE is not set
-
-#
-# SPI devices
-#
-
-#
-# SUPERH devices
-#
-
-#
-# USB devices
-#
+CONFIG_SND_SPI=y
+CONFIG_SND_SUPERH=y
+CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# SoC Audio support for SuperH
-#
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# Open Sound System
-#
 CONFIG_SOUND_PRIME=m
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
 CONFIG_AC97_BUS=m
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -1022,12 +1023,16 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 # CONFIG_USB_EHCI_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1041,6 +1046,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1060,7 +1066,9 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 CONFIG_USB_LIBUSUAL=y
 
 #
@@ -1096,9 +1104,12 @@ CONFIG_USB_LIBUSUAL=y
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
@@ -1118,6 +1129,8 @@ CONFIG_RTC_INTF_DEV=y
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 CONFIG_RTC_DRV_R9701=y
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -1137,10 +1150,7 @@ CONFIG_RTC_DRV_R9701=y
 # on-CPU RTC drivers
 #
 # CONFIG_RTC_DRV_SH is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -1155,14 +1165,11 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -1208,8 +1215,11 @@ CONFIG_TMPFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -1275,12 +1285,14 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 CONFIG_EARLY_SCIF_CONSOLE=y
@@ -1295,48 +1307,81 @@ CONFIG_EARLY_PRINTK=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
@@ -1345,8 +1390,10 @@ CONFIG_CRYPTO_HW=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/rts7751r2dplus_defconfig b/arch/sh/configs/rts7751r2dplus_defconfig
index 0a6d3b9e648b..7d9fa6e9ded5 100644
--- a/arch/sh/configs/rts7751r2dplus_defconfig
+++ b/arch/sh/configs/rts7751r2dplus_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24
-# Thu Feb  7 16:17:47 2008
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:59:18 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -20,6 +21,8 @@ CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_IO_TRAPPED=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -36,17 +39,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
@@ -76,22 +77,31 @@ CONFIG_PROFILING=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -106,7 +116,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
 
 #
 # System type
@@ -116,6 +125,7 @@ CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -133,6 +143,7 @@ CONFIG_CPU_SH4=y
 CONFIG_CPU_SUBTYPE_SH7751R=y
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -140,6 +151,7 @@ CONFIG_CPU_SUBTYPE_SH7751R=y
 # CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
 # CONFIG_CPU_SUBTYPE_SH5_101 is not set
 # CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
@@ -161,7 +173,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -170,6 +184,7 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
@@ -256,7 +271,6 @@ CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_RCU_TRACE=y
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
 
@@ -332,8 +346,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -367,6 +379,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
@@ -383,6 +396,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
@@ -399,14 +414,18 @@ CONFIG_BLK_DEV=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -466,6 +485,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -478,9 +498,13 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
@@ -490,7 +514,6 @@ CONFIG_ATA=y
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
 # CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
@@ -535,17 +558,21 @@ CONFIG_ATA=y
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 CONFIG_PATA_PLATFORM=y
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -564,6 +591,7 @@ CONFIG_MII=y
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
 # CONFIG_ENC28J60 is not set
+# CONFIG_SMC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -599,7 +627,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -609,12 +636,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -627,6 +654,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -634,6 +662,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -690,9 +719,11 @@ CONFIG_INPUT=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -726,10 +757,6 @@ CONFIG_HW_RANDOM=y
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
 CONFIG_SPI_MASTER=y
 
@@ -765,6 +792,8 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -776,13 +805,24 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 CONFIG_MFD_SM501=y
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 # CONFIG_USB_DABUSB is not set
 
@@ -802,8 +842,8 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -836,6 +876,8 @@ CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+CONFIG_FB_SH_MOBILE_LCDC=m
 CONFIG_FB_SM501=y
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
@@ -862,15 +904,7 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_SUPERH_MONO is not set
 # CONFIG_LOGO_SUPERH_VGA16 is not set
 CONFIG_LOGO_SUPERH_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -884,21 +918,17 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_VMASTER=y
 CONFIG_SND_MPU401_UART=m
 CONFIG_SND_OPL3_LIB=m
 CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALI5451 is not set
@@ -907,6 +937,7 @@ CONFIG_SND_AC97_CODEC=m
 # CONFIG_SND_AU8810 is not set
 # CONFIG_SND_AU8820 is not set
 # CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
 # CONFIG_SND_AZT3328 is not set
 # CONFIG_SND_BT87X is not set
 # CONFIG_SND_CA0106 is not set
@@ -957,43 +988,13 @@ CONFIG_SND_AC97_CODEC=m
 # CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 CONFIG_SND_YMFPCI=m
-CONFIG_SND_YMFPCI_FIRMWARE_IN_KERNEL=y
-# CONFIG_SND_AC97_POWER_SAVE is not set
-
-#
-# SPI devices
-#
-
-#
-# SUPERH devices
-#
-
-#
-# USB devices
-#
+CONFIG_SND_SPI=y
+CONFIG_SND_SUPERH=y
+CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# SoC Audio support for SuperH
-#
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# Open Sound System
-#
 CONFIG_SOUND_PRIME=m
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
 CONFIG_AC97_BUS=m
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -1022,12 +1023,16 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 # CONFIG_USB_EHCI_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1041,6 +1046,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1060,7 +1066,9 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 CONFIG_USB_LIBUSUAL=y
 
 #
@@ -1096,9 +1104,12 @@ CONFIG_USB_LIBUSUAL=y
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
@@ -1118,6 +1129,8 @@ CONFIG_RTC_INTF_DEV=y
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 CONFIG_RTC_DRV_R9701=y
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -1137,10 +1150,7 @@ CONFIG_RTC_DRV_R9701=y
 # on-CPU RTC drivers
 #
 # CONFIG_RTC_DRV_SH is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -1155,14 +1165,11 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -1208,8 +1215,11 @@ CONFIG_TMPFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -1275,12 +1285,14 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 CONFIG_EARLY_SCIF_CONSOLE=y
@@ -1295,48 +1307,81 @@ CONFIG_EARLY_PRINTK=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
@@ -1345,8 +1390,10 @@ CONFIG_CRYPTO_HW=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/sdk7780_defconfig b/arch/sh/configs/sdk7780_defconfig
index bb9bcd6591ab..6d834f242905 100644
--- a/arch/sh/configs/sdk7780_defconfig
+++ b/arch/sh/configs/sdk7780_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc7
-# Tue Jan 22 11:34:03 2008
+# Linux kernel version: 2.6.26
+# Wed Jul 30 02:00:12 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -20,6 +21,7 @@ CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -38,24 +40,23 @@ CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=18
 # CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -63,11 +64,13 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
@@ -75,11 +78,24 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
@@ -90,6 +106,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -103,6 +120,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System type
@@ -113,6 +131,7 @@ CONFIG_CPU_SH4A=y
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -130,6 +149,7 @@ CONFIG_CPU_SH4A=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 CONFIG_CPU_SUBTYPE_SH7780=y
@@ -137,6 +157,7 @@ CONFIG_CPU_SUBTYPE_SH7780=y
 # CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
 # CONFIG_CPU_SUBTYPE_SH5_101 is not set
 # CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
@@ -159,7 +180,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_HUGETLB_PAGE_SIZE_64K=y
 # CONFIG_HUGETLB_PAGE_SIZE_256K is not set
 # CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
@@ -174,6 +197,7 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=0
@@ -205,7 +229,6 @@ CONFIG_CPU_HAS_FPU=y
 # CONFIG_SH_7780_SOLUTION_ENGINE is not set
 CONFIG_SH_SDK7780=y
 # CONFIG_SH_HIGHLANDER is not set
-# CONFIG_SH_SDK7780_STANDALONE is not set
 CONFIG_SH_SDK7780_BASE=y
 
 #
@@ -250,12 +273,13 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_PREEMPT_BKL=y
+# CONFIG_PREEMPT_RCU is not set
 CONFIG_GUSA=y
 
 #
@@ -321,6 +345,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -370,8 +395,10 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=y
 # CONFIG_INET6_XFRM_MODE_BEET is not set
 # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_IPV6_TUNNEL is not set
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -397,7 +424,6 @@ CONFIG_NET_SCHED=y
 # CONFIG_NET_SCH_HTB is not set
 # CONFIG_NET_SCH_HFSC is not set
 # CONFIG_NET_SCH_PRIO is not set
-# CONFIG_NET_SCH_RR is not set
 # CONFIG_NET_SCH_RED is not set
 # CONFIG_NET_SCH_SFQ is not set
 # CONFIG_NET_SCH_TEQL is not set
@@ -405,7 +431,6 @@ CONFIG_NET_SCHED=y
 # CONFIG_NET_SCH_GRED is not set
 # CONFIG_NET_SCH_DSMARK is not set
 # CONFIG_NET_SCH_NETEM is not set
-# CONFIG_NET_SCH_INGRESS is not set
 
 #
 # Classification
@@ -417,9 +442,9 @@ CONFIG_NET_SCHED=y
 # CONFIG_NET_CLS_U32 is not set
 # CONFIG_NET_CLS_RSVP is not set
 # CONFIG_NET_CLS_RSVP6 is not set
+# CONFIG_NET_CLS_FLOW is not set
 # CONFIG_NET_EMATCH is not set
 # CONFIG_NET_CLS_ACT is not set
-# CONFIG_NET_CLS_POLICE is not set
 CONFIG_NET_SCH_FIFO=y
 
 #
@@ -427,6 +452,7 @@ CONFIG_NET_SCH_FIFO=y
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -452,6 +478,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -475,16 +503,18 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
@@ -492,6 +522,7 @@ CONFIG_IDEDISK_MULTI_MODE=y
 # CONFIG_BLK_DEV_IDECS is not set
 # CONFIG_BLK_DEV_DELKIN is not set
 CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
 # CONFIG_BLK_DEV_IDESCSI is not set
@@ -501,14 +532,12 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
 CONFIG_BLK_DEV_PLATFORM=y
 
 #
 # PCI IDE chipsets support
 #
 CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
 CONFIG_IDEPCI_PCIBUS_ORDER=y
 # CONFIG_BLK_DEV_OFFBOARD is not set
 CONFIG_BLK_DEV_GENERIC=y
@@ -518,10 +547,8 @@ CONFIG_BLK_DEV_GENERIC=y
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -537,10 +564,7 @@ CONFIG_BLK_DEV_GENERIC=y
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 # CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDE_ARCH_OBSOLETE_INIT is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -600,6 +624,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -613,9 +638,13 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
@@ -625,7 +654,6 @@ CONFIG_ATA=y
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
 # CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
@@ -654,6 +682,7 @@ CONFIG_ATA=y
 # CONFIG_PATA_MPIIX is not set
 # CONFIG_PATA_OLDPIIX is not set
 # CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
 # CONFIG_PATA_NS87410 is not set
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
@@ -670,6 +699,7 @@ CONFIG_ATA=y
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
 CONFIG_MD=y
 # CONFIG_BLK_DEV_MD is not set
 CONFIG_BLK_DEV_DM=y
@@ -686,11 +716,14 @@ CONFIG_BLK_DEV_DM=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -708,6 +741,7 @@ CONFIG_MII=y
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 CONFIG_SMC91X=y
+# CONFIG_SMC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -726,6 +760,7 @@ CONFIG_SMC91X=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -743,7 +778,6 @@ CONFIG_SMC91X=y
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 CONFIG_NETCONSOLE=y
 # CONFIG_NETCONSOLE_DYNAMIC is not set
 CONFIG_NETPOLL=y
@@ -780,6 +814,7 @@ CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SH_KEYSC is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
@@ -812,10 +847,13 @@ CONFIG_SERIO_LIBPS2=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -847,22 +885,20 @@ CONFIG_HW_RANDOM=y
 # CONFIG_SYNCLINK_CS is not set
 # CONFIG_CARDMAN_4000 is not set
 # CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 CONFIG_POWER_SUPPLY=y
 # CONFIG_POWER_SUPPLY_DEBUG is not set
 # CONFIG_PDA_POWER is not set
 # CONFIG_BATTERY_DS2760 is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -870,8 +906,10 @@ CONFIG_POWER_SUPPLY=y
 #
 CONFIG_SSB_POSSIBLE=y
 CONFIG_SSB=y
+CONFIG_SSB_SPROM=y
 CONFIG_SSB_PCIHOST_POSSIBLE=y
 CONFIG_SSB_PCIHOST=y
+# CONFIG_SSB_B43_PCI_BRIDGE is not set
 CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
 # CONFIG_SSB_PCMCIAHOST is not set
 # CONFIG_SSB_SILENT is not set
@@ -882,13 +920,24 @@ CONFIG_SSB_DRIVER_PCICORE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -900,15 +949,15 @@ CONFIG_SSB_DRIVER_PCICORE=y
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
+CONFIG_FB_CFB_FILLRECT=m
+CONFIG_FB_CFB_COPYAREA=m
+CONFIG_FB_CFB_IMAGEBLIT=m
 # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -941,6 +990,8 @@ CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+CONFIG_FB_SH_MOBILE_LCDC=m
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
@@ -970,24 +1021,9 @@ CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_LOGO_SUPERH_MONO=y
 CONFIG_LOGO_SUPERH_VGA16=y
 CONFIG_LOGO_SUPERH_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 # CONFIG_SND is not set
-
-#
-# Open Sound System
-#
 CONFIG_SOUND_PRIME=y
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
@@ -1006,6 +1042,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
@@ -1014,15 +1051,18 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 # CONFIG_USB_OHCI_HCD is not set
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
@@ -1033,6 +1073,7 @@ CONFIG_USB_EHCI_HCD=y
 #
 # CONFIG_USB_ACM is not set
 CONFIG_USB_PRINTER=y
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1054,6 +1095,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
@@ -1067,10 +1109,6 @@ CONFIG_USB_MON=y
 # USB port drivers
 #
 # CONFIG_USB_USS720 is not set
-
-#
-# USB Serial Converter support
-#
 # CONFIG_USB_SERIAL is not set
 
 #
@@ -1096,16 +1134,10 @@ CONFIG_USB_MON=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 
@@ -1117,13 +1149,11 @@ CONFIG_LEDS_CLASS=y
 # LED Triggers
 #
 # CONFIG_LEDS_TRIGGERS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -1145,14 +1175,11 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
 # CONFIG_FUSE_FS is not set
@@ -1203,8 +1230,11 @@ CONFIG_HUGETLB_PAGE=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -1212,19 +1242,16 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1279,7 +1306,6 @@ CONFIG_NLS_ISO8859_15=y
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
 # CONFIG_DLM is not set
-# CONFIG_INSTRUMENTATION is not set
 
 #
 # Kernel hacking
@@ -1288,6 +1314,7 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_UNUSED_SYMBOLS=y
 # CONFIG_DEBUG_FS is not set
@@ -1295,10 +1322,14 @@ CONFIG_UNUSED_SYMBOLS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
 CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 CONFIG_DEBUG_PREEMPT=y
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -1313,12 +1344,14 @@ CONFIG_DEBUG_PREEMPT=y
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_FRAME_POINTER is not set
-# CONFIG_FORCED_INLINING is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
 CONFIG_SH_STANDARD_BIOS=y
@@ -1338,52 +1371,94 @@ CONFIG_DEBUG_STACKOVERFLOW=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
 # CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/se7206_defconfig b/arch/sh/configs/se7206_defconfig
index 6b34baa26eae..af15cbef12ba 100644
--- a/arch/sh/configs/se7206_defconfig
+++ b/arch/sh/configs/se7206_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Tue Jun  3 20:27:08 2008
+# Linux kernel version: 2.6.26
+# Wed Jul 30 02:06:07 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -87,9 +88,14 @@ CONFIG_PROFILING=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
@@ -99,12 +105,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -175,7 +182,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -294,6 +303,7 @@ CONFIG_CF_BASE_ADDR=0xb8000000
 #
 # Executable file formats
 #
+CONFIG_BINFMT_ELF_FDPIC=y
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
 CONFIG_BINFMT_SHARED_FLAT=y
@@ -487,6 +497,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_93CX6=y
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -503,7 +514,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -516,6 +526,7 @@ CONFIG_MII=y
 # CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 CONFIG_SMC91X=y
+# CONFIG_SMC911X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -583,6 +594,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -594,6 +606,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 
@@ -625,10 +638,6 @@ CONFIG_SSB_POSSIBLE=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
@@ -669,6 +678,7 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_SH=y
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -728,6 +738,7 @@ CONFIG_CONFIGFS_FS=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
@@ -738,13 +749,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -776,6 +786,8 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -795,6 +807,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 CONFIG_DEBUG_VM=y
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 CONFIG_DEBUG_LIST=y
 # CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
@@ -860,6 +873,10 @@ CONFIG_CRYPTO_ALGAPI=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -899,6 +916,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=y
 CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
 CONFIG_CRC_ITU_T=y
 CONFIG_CRC32=y
 CONFIG_CRC7=y
diff --git a/arch/sh/configs/se7343_defconfig b/arch/sh/configs/se7343_defconfig
index 84c0075e2ad4..4e30b70377e2 100644
--- a/arch/sh/configs/se7343_defconfig
+++ b/arch/sh/configs/se7343_defconfig
@@ -1,40 +1,56 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18
-# Tue Oct  3 11:46:17 2006
+# Linux kernel version: 2.6.26
+# Wed Jul 30 02:08:38 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
@@ -46,33 +62,47 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
+CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 # CONFIG_SHMEM is not set
-CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-
-#
-# Block layer
-#
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -86,62 +116,28 @@ CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System type
 #
-CONFIG_SOLUTION_ENGINE=y
-# CONFIG_SH_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-CONFIG_SH_7343_SOLUTION_ENGINE=y
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_EC3104 is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_BIGSUR is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-# CONFIG_SH_7710VOIPGW is not set
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_R7780RP is not set
-# CONFIG_SH_EDOSK7705 is not set
-# CONFIG_SH_SH4202_MICRODEV is not set
-# CONFIG_SH_LANDISK is not set
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_SHMIN is not set
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
 CONFIG_CPU_SH4=y
 CONFIG_CPU_SH4A=y
 CONFIG_CPU_SH4AL_DSP=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
-
-#
-# SH-3 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
 # CONFIG_CPU_SUBTYPE_SH7708 is not set
 # CONFIG_CPU_SUBTYPE_SH7709 is not set
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
-
-#
-# SH-4 Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -150,67 +146,89 @@ CONFIG_CPU_SH4AL_DSP=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-
-#
-# ST40 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
 CONFIG_CPU_SUBTYPE_SH7343=y
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
 #
+CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x01000000
-CONFIG_32BIT=y
+CONFIG_29BIT=y
 CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
 
 #
 # Cache configuration
 #
 # CONFIG_SH_DIRECT_MAPPED is not set
-# CONFIG_SH_WRITETHROUGH is not set
-# CONFIG_SH_OCRAM is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
 
 #
 # Processor features
 #
 CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_SH_FPU is not set
+# CONFIG_CPU_BIG_ENDIAN is not set
 # CONFIG_SH_FPU_EMU is not set
 CONFIG_SH_DSP=y
 # CONFIG_SH_STORE_QUEUES is not set
 CONFIG_CPU_HAS_INTEVT=y
 CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_DSP=y
+
+#
+# Board support
+#
+CONFIG_SOLUTION_ENGINE=y
+CONFIG_SH_7343_SOLUTION_ENGINE=y
 
 #
-# Timer support
+# Timer and clock configuration
 #
 CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=27000000
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -225,57 +243,50 @@ CONFIG_SH_PCLK_FREQ=27000000
 #
 # Companion Chips
 #
-# CONFIG_HD6446X_SERIES is not set
+
+#
+# Additional SuperH Device Drivers
+#
 CONFIG_HEARTBEAT=y
+# CONFIG_PUSH_SWITCH is not set
 
 #
 # Kernel features
 #
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
-# CONFIG_SMP is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
 
 #
 # Boot options
 #
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
-# CONFIG_UBC_WAKEUP is not set
 # CONFIG_CMDLINE_BOOL is not set
 
 #
 # Bus options
 #
-# CONFIG_PCI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_CF_ENABLER is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
 
 #
-# PCI Hotplug Support
-#
-
-#
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
 # CONFIG_BINFMT_MISC is not set
 
 #
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
-#
 # Networking
 #
 CONFIG_NET=y
@@ -283,22 +294,20 @@ CONFIG_NET=y
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
+# CONFIG_IP_PNP is not set
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
@@ -310,29 +319,18 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -345,10 +343,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -356,9 +350,20 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -367,36 +372,34 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
 #
 CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -422,13 +425,15 @@ CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_RAM=y
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
 
 #
 # Mapping drivers for chip access
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -445,130 +450,102 @@ CONFIG_MTD_RAM=y
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
 # CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
 # CONFIG_MTD_ONENAND is not set
 
 #
-# Parallel port support
+# UBI - Unsorted block images
 #
+# CONFIG_MTD_UBI is not set
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
 
 #
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
+# SCSI support type (disk, tape, CD-ROM)
 #
-# CONFIG_ATA is not set
+# CONFIG_BLK_DEV_SD is not set
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
 
 #
-# Multi-device support (RAID and LVM)
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
 #
-# CONFIG_MD is not set
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
+# SCSI Transports
 #
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# PHY device support
-#
+# CONFIG_VETH is not set
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 CONFIG_SMC91X=y
+# CONFIG_SMC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
 
 #
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
+# Wireless LAN
 #
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -576,13 +553,13 @@ CONFIG_SMC91X=y
 #
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -592,6 +569,7 @@ CONFIG_INPUT=y
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -605,9 +583,11 @@ CONFIG_INPUT=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -626,156 +606,106 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_UNIX98_PTYS is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
+# CONFIG_I2C is not set
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# Dallas's 1-wire bus
+# Sonics Silicon Backplane
 #
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
-# Hardware Monitoring support
+# Multifunction device drivers
 #
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
-# Misc devices
+# Multimedia devices
 #
 
 #
-# Multimedia devices
+# Multimedia core support
 #
 CONFIG_VIDEO_DEV=y
-CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEO_V4L2_COMMON=y
+CONFIG_VIDEO_ALLOW_V4L1=y
 CONFIG_VIDEO_V4L1_COMPAT=y
-CONFIG_VIDEO_V4L2=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=y
 
 #
-# Video Capture Adapters
-#
-
-#
-# Video Capture Adapters
+# Multimedia drivers
 #
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
 # CONFIG_VIDEO_ADV_DEBUG is not set
 CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
 # CONFIG_VIDEO_VIVI is not set
 # CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_TUNER_3036 is not set
-
-#
-# Radio Adapters
-#
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
+# CONFIG_SOC_CAMERA is not set
+# CONFIG_VIDEO_SH_MOBILE_CEU is not set
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-CONFIG_FIRMWARE_EDID=y
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=m
+CONFIG_FB_CFB_COPYAREA=m
+CONFIG_FB_CFB_IMAGEBLIT=m
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_EPSON1355 is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
 
 #
-# Console display driver support
+# Frame buffer hardware drivers
 #
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_SH_MOBILE_LCDC=m
+# CONFIG_FB_VIRTUAL is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Sound
+# Display device support
 #
-CONFIG_SOUND=y
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
-# Advanced Linux Sound Architecture
+# Console display driver support
 #
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
+CONFIG_SOUND=y
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
@@ -791,96 +721,49 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_VIRMIDI is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# Open Sound System
-#
+CONFIG_SND_SUPERH=y
+# CONFIG_SND_SOC is not set
 # CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
 
 #
 # File systems
 #
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -909,7 +792,6 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -922,35 +804,34 @@ CONFIG_RAMFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 # CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
+CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=y
 # CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_ROOT_NFS=y
+# CONFIG_NFSD_V4 is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
@@ -963,56 +844,136 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 # CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_DLM is not set
 
 #
 # Kernel hacking
 #
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_KGDB is not set
+CONFIG_EARLY_SCIF_CONSOLE=y
+CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe00000
+CONFIG_EARLY_PRINTK=y
+# CONFIG_SH_KGDB is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
 
 #
-# Cryptographic options
+# Compression
 #
-# CONFIG_CRYPTO is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/se7619_defconfig b/arch/sh/configs/se7619_defconfig
index 3a3c3c1f507d..80c1c72edb56 100644
--- a/arch/sh/configs/se7619_defconfig
+++ b/arch/sh/configs/se7619_defconfig
@@ -1,9 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22-rc4
-# Fri Jun 15 19:43:06 2007
+# Linux kernel version: 2.6.26
+# Wed Jul 30 02:12:32 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -17,27 +19,26 @@ CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SYSVIPC is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
@@ -49,6 +50,7 @@ CONFIG_EMBEDDED=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
+CONFIG_COMPAT_BRK=y
 # CONFIG_BASE_FULL is not set
 # CONFIG_FUTEX is not set
 CONFIG_ANON_INODES=y
@@ -60,20 +62,26 @@ CONFIG_EVENTFD=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_SLABINFO=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=1
-
-#
-# Loadable module support
-#
 # CONFIG_MODULES is not set
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -87,14 +95,17 @@ CONFIG_IOSCHED_NOOP=y
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System type
 #
 CONFIG_CPU_SH2=y
 CONFIG_CPU_SUBTYPE_SH7619=y
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -102,6 +113,8 @@ CONFIG_CPU_SUBTYPE_SH7619=y
 # CONFIG_CPU_SUBTYPE_SH7709 is not set
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
 # CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -110,14 +123,17 @@ CONFIG_CPU_SUBTYPE_SH7619=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
 # CONFIG_CPU_SUBTYPE_SH7785 is not set
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -126,6 +142,7 @@ CONFIG_QUICKLIST=y
 CONFIG_PAGE_OFFSET=0x00000000
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_29BIT=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_DEFAULT=y
@@ -134,7 +151,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -142,6 +161,8 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
@@ -151,7 +172,9 @@ CONFIG_NR_QUICK=2
 # Cache configuration
 #
 # CONFIG_SH_DIRECT_MAPPED is not set
-CONFIG_SH_WRITETHROUGH=y
+# CONFIG_CACHE_WRITEBACK is not set
+CONFIG_CACHE_WRITETHROUGH=y
+# CONFIG_CACHE_OFF is not set
 
 #
 # Processor features
@@ -159,8 +182,6 @@ CONFIG_SH_WRITETHROUGH=y
 # CONFIG_CPU_LITTLE_ENDIAN is not set
 CONFIG_CPU_BIG_ENDIAN=y
 # CONFIG_SH_FPU_EMU is not set
-# CONFIG_SH_DSP is not set
-CONFIG_CPU_HAS_IPR_IRQ=y
 
 #
 # Board support
@@ -185,7 +206,6 @@ CONFIG_SH_CLK_MD=5
 #
 # DMA support
 #
-# CONFIG_SH_DMA is not set
 
 #
 # Companion Chips
@@ -205,11 +225,13 @@ CONFIG_HZ_100=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=100
+# CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
 
 #
 # Boot options
@@ -221,15 +243,13 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000
 #
 # Bus options
 #
+# CONFIG_CF_ENABLER is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 
 #
-# PCCARD (PCMCIA/CardBus) support
-#
-
-#
 # Executable file formats
 #
+CONFIG_BINFMT_ELF_FDPIC=y
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
 # CONFIG_BINFMT_SHARED_FLAT is not set
@@ -250,10 +270,6 @@ CONFIG_BINFMT_ZFLAT=y
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
@@ -263,6 +279,7 @@ CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
 # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -275,6 +292,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -334,29 +352,17 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# Misc devices
-#
-# CONFIG_BLINK is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -364,21 +370,10 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# ISDN subsystem
-#
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -386,13 +381,13 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 #
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -416,6 +411,7 @@ CONFIG_INPUT=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -433,123 +429,84 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_UNIX98_PTYS is not set
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# Dallas's 1-wire bus
+# Sonics Silicon Backplane
 #
-# CONFIG_W1 is not set
-# CONFIG_HWMON is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
-CONFIG_DAB=y
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Graphics support
+# Multimedia drivers
 #
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+CONFIG_DAB=y
 
 #
-# Display device support
+# Graphics support
 #
-# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Sound
+# Display device support
 #
+# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
+CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_HIDRAW is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -561,12 +518,9 @@ CONFIG_HID=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
+# CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -592,7 +546,6 @@ CONFIG_PROC_SYSCTL=y
 # CONFIG_SYSFS is not set
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 
 #
 # Miscellaneous filesystems
@@ -607,8 +560,11 @@ CONFIG_RAMFS=y
 # CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 
@@ -617,28 +573,23 @@ CONFIG_RAMFS=y
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 # CONFIG_NLS is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 
@@ -646,20 +597,20 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # Security options
 #
 # CONFIG_KEYS is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_HAS_IOMEM=y
diff --git a/arch/sh/configs/se7712_defconfig b/arch/sh/configs/se7712_defconfig
index 2dd83af988f0..7be79cd04eb0 100644
--- a/arch/sh/configs/se7712_defconfig
+++ b/arch/sh/configs/se7712_defconfig
@@ -1,53 +1,57 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-rc4
-# Wed Mar 28 10:19:02 2007
+# Linux kernel version: 2.6.26-rc6
+# Wed Jun 18 16:36:08 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-# CONFIG_GENERIC_TIME is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -55,33 +59,41 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 # CONFIG_BUG is not set
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_BASE_FULL is not set
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 # CONFIG_SHMEM is not set
-CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=1
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 # CONFIG_KMOD is not set
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
 
 #
 # IO Schedulers
@@ -95,57 +107,17 @@ CONFIG_IOSCHED_NOOP=y
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System type
 #
-CONFIG_SOLUTION_ENGINE=y
-CONFIG_SH_SOLUTION_ENGINE=y
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-# CONFIG_SH_7343_SOLUTION_ENGINE is not set
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-# CONFIG_SH_7710VOIPGW is not set
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_HIGHLANDER is not set
-# CONFIG_SH_EDOSK7705 is not set
-# CONFIG_SH_SH4202_MICRODEV is not set
-# CONFIG_SH_LANDISK is not set
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_SHMIN is not set
-# CONFIG_SH_7206_SOLUTION_ENGINE is not set
-# CONFIG_SH_7619_SOLUTION_ENGINE is not set
-# CONFIG_SH_LBOX_RE2 is not set
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
 CONFIG_CPU_SH3=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
-
-#
-# SH-2A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
-
-#
-# SH-3 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -153,10 +125,8 @@ CONFIG_CPU_SH3=y
 # CONFIG_CPU_SUBTYPE_SH7709 is not set
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
 CONFIG_CPU_SUBTYPE_SH7712=y
-
-#
-# SH-4 Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -165,37 +135,37 @@ CONFIG_CPU_SUBTYPE_SH7712=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-
-#
-# ST40 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
 # CONFIG_CPU_SUBTYPE_SH7785 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
 #
+CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x02000000
+CONFIG_29BIT=y
 CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -203,21 +173,21 @@ CONFIG_FLATMEM_MANUAL=y
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
 
 #
 # Cache configuration
 #
 # CONFIG_SH_DIRECT_MAPPED is not set
-# CONFIG_SH_WRITETHROUGH is not set
-# CONFIG_SH_OCRAM is not set
-CONFIG_CF_ENABLER=y
-# CONFIG_CF_AREA5 is not set
-CONFIG_CF_AREA6=y
-CONFIG_CF_BASE_ADDR=0xb8000000
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
 
 #
 # Processor features
@@ -230,6 +200,14 @@ CONFIG_CPU_LITTLE_ENDIAN=y
 CONFIG_CPU_HAS_INTEVT=y
 CONFIG_CPU_HAS_IPR_IRQ=y
 CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_DSP=y
+
+#
+# Board support
+#
+CONFIG_SOLUTION_ENGINE=y
+CONFIG_SH_SOLUTION_ENGINE=y
+# CONFIG_SH_AP325RXA is not set
 
 #
 # Timer and clock configuration
@@ -237,6 +215,10 @@ CONFIG_CPU_HAS_SR_RB=y
 CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=66666666
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -251,7 +233,6 @@ CONFIG_SH_PCLK_FREQ=66666666
 #
 # Companion Chips
 #
-# CONFIG_HD6446X_SERIES is not set
 
 #
 # Additional SuperH Device Drivers
@@ -267,48 +248,40 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
-# CONFIG_SMP is not set
+# CONFIG_CRASH_DUMP is not set
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
 
 #
 # Boot options
 #
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
-# CONFIG_UBC_WAKEUP is not set
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
 
 #
 # Bus options
 #
-# CONFIG_PCI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+CONFIG_CF_ENABLER=y
+# CONFIG_CF_AREA5 is not set
+CONFIG_CF_AREA6=y
+CONFIG_CF_BASE_ADDR=0xb8000000
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
 
 #
-# PCI Hotplug Support
-#
-
-#
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
 # CONFIG_BINFMT_MISC is not set
 
 #
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
-#
 # Networking
 #
 CONFIG_NET=y
@@ -316,7 +289,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -324,6 +296,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -334,11 +307,10 @@ CONFIG_ASK_IP_FIB_HASH=y
 CONFIG_IP_FIB_HASH=y
 CONFIG_IP_MULTIPLE_TABLES=y
 CONFIG_IP_ROUTE_MULTIPATH=y
-# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
 CONFIG_IP_ROUTE_VERBOSE=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
+CONFIG_IP_PNP_BOOTP=y
 # CONFIG_IP_PNP_RARP is not set
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
@@ -355,30 +327,17 @@ CONFIG_INET_TUNNEL=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -391,15 +350,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_FIFO=y
-CONFIG_NET_SCH_CLK_JIFFIES=y
-# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
-# CONFIG_NET_SCH_CLK_CPU is not set
 
 #
 # Queueing/Scheduling
@@ -408,6 +359,7 @@ CONFIG_NET_SCH_CBQ=y
 CONFIG_NET_SCH_HTB=y
 CONFIG_NET_SCH_HFSC=y
 CONFIG_NET_SCH_PRIO=y
+# CONFIG_NET_SCH_RR is not set
 CONFIG_NET_SCH_RED=y
 CONFIG_NET_SCH_SFQ=y
 CONFIG_NET_SCH_TEQL=y
@@ -415,7 +367,6 @@ CONFIG_NET_SCH_TBF=y
 CONFIG_NET_SCH_GRED=y
 CONFIG_NET_SCH_DSMARK=y
 CONFIG_NET_SCH_NETEM=y
-CONFIG_NET_SCH_INGRESS=y
 
 #
 # Classification
@@ -429,50 +380,55 @@ CONFIG_NET_CLS_FW=y
 # CONFIG_NET_CLS_U32 is not set
 # CONFIG_NET_CLS_RSVP is not set
 # CONFIG_NET_CLS_RSVP6 is not set
+# CONFIG_NET_CLS_FLOW is not set
 # CONFIG_NET_EMATCH is not set
 # CONFIG_NET_CLS_ACT is not set
-# CONFIG_NET_CLS_POLICE is not set
 CONFIG_NET_CLS_IND=y
-CONFIG_NET_ESTIMATOR=y
+CONFIG_NET_SCH_FIFO=y
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_AF_RXRPC is not set
 CONFIG_FIB_RULES=y
 
 #
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
 # Device Drivers
 #
 
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -485,6 +441,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -510,7 +467,6 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
 
 #
 # Mapping drivers for chip access
@@ -533,44 +489,25 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
 # CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
 # CONFIG_MTD_ONENAND is not set
 
 #
-# Parallel port support
+# UBI - Unsorted block images
 #
+# CONFIG_MTD_UBI is not set
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -578,6 +515,7 @@ CONFIG_MTD_CFI_UTIL=y
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
@@ -599,6 +537,7 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
 # CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
 # SCSI Transports
@@ -606,94 +545,72 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_DEBUG is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
 CONFIG_PATA_PLATFORM=y
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# PHY device support
-#
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+CONFIG_MDIO_BITBANG=y
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_STNIC is not set
+CONFIG_SH_ETH=y
+# CONFIG_SMC91X is not set
+# CONFIG_SMC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_E1000E_ENABLED is not set
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -711,6 +628,7 @@ CONFIG_NETDEVICES=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -728,99 +646,78 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
 CONFIG_HW_RANDOM=m
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# Hardware Monitoring support
+# Sonics Silicon Backplane
 #
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multimedia drivers
 #
-# CONFIG_DVB is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Sound
+# Display device support
 #
-# CONFIG_SOUND is not set
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
-# USB support
+# Sound
 #
-# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_SOUND is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 
@@ -834,40 +731,10 @@ CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_TRIGGERS=y
 # CONFIG_LEDS_TRIGGER_TIMER is not set
 # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
-#
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -877,20 +744,21 @@ CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
 # CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
 # CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -919,7 +787,6 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -935,68 +802,67 @@ CONFIG_RAMFS=y
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 # CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
 # CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 # CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DETECT_SOFTLOCKUP is not set
+CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -1004,21 +870,28 @@ CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_LOCK_ALLOC is not set
 # CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
-# CONFIG_FORCED_INLINING is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DEBUG_BOOTMEM is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_SH_KGDB is not set
 
 #
@@ -1026,62 +899,100 @@ CONFIG_FRAME_POINTER=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
 
 #
-# Cryptographic options
+# Crypto core or helper
 #
-CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=y
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
 CONFIG_CRYPTO_SHA1=y
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
 
 #
-# Hardware crypto devices
+# Compression
 #
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/sh7763rdp_defconfig b/arch/sh/configs/sh7763rdp_defconfig
new file mode 100644
index 000000000000..83f3fe5db3e5
--- /dev/null
+++ b/arch/sh/configs/sh7763rdp_defconfig
@@ -0,0 +1,1052 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc4
+# Fri Jun  6 12:20:17 2008
+#
+CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+# CONFIG_MODULE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System type
+#
+CONFIG_CPU_SH4=y
+CONFIG_CPU_SH4A=y
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+CONFIG_CPU_SUBTYPE_SH7763=y
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
+
+#
+# Memory management options
+#
+CONFIG_QUICKLIST=y
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_29BIT=y
+CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+# CONFIG_MEMORY_HOTPLUG is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_SH_FPU=y
+# CONFIG_SH_STORE_QUEUES is not set
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_FPU=y
+
+#
+# Board support
+#
+CONFIG_SH_SH7763RDP=y
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=28
+CONFIG_SH_PCLK_FREQ=66666666
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+
+#
+# Additional SuperH Device Drivers
+#
+# CONFIG_HEARTBEAT is not set
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttySC2,115200 root=/dev/sda1 rootdelay=10"
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+# CONFIG_MTD_CHAR is not set
+CONFIG_MTD_BLKDEVS=y
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x8000000
+CONFIG_MTD_PHYSMAP_LEN=0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+CONFIG_MDIO_BITBANG=y
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_STNIC is not set
+# CONFIG_SMC91X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=3
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=y
+CONFIG_NLS_CODEPAGE_775=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_CODEPAGE_852=y
+CONFIG_NLS_CODEPAGE_855=y
+CONFIG_NLS_CODEPAGE_857=y
+CONFIG_NLS_CODEPAGE_860=y
+CONFIG_NLS_CODEPAGE_861=y
+CONFIG_NLS_CODEPAGE_862=y
+CONFIG_NLS_CODEPAGE_863=y
+CONFIG_NLS_CODEPAGE_864=y
+CONFIG_NLS_CODEPAGE_865=y
+CONFIG_NLS_CODEPAGE_866=y
+CONFIG_NLS_CODEPAGE_869=y
+CONFIG_NLS_CODEPAGE_936=y
+CONFIG_NLS_CODEPAGE_950=y
+CONFIG_NLS_CODEPAGE_932=y
+CONFIG_NLS_CODEPAGE_949=y
+CONFIG_NLS_CODEPAGE_874=y
+CONFIG_NLS_ISO8859_8=y
+CONFIG_NLS_CODEPAGE_1250=y
+CONFIG_NLS_CODEPAGE_1251=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+CONFIG_NLS_ISO8859_3=y
+CONFIG_NLS_ISO8859_4=y
+CONFIG_NLS_ISO8859_5=y
+CONFIG_NLS_ISO8859_6=y
+CONFIG_NLS_ISO8859_7=y
+CONFIG_NLS_ISO8859_9=y
+CONFIG_NLS_ISO8859_13=y
+CONFIG_NLS_ISO8859_14=y
+CONFIG_NLS_ISO8859_15=y
+CONFIG_NLS_KOI8_R=y
+CONFIG_NLS_KOI8_U=y
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_SH_STANDARD_BIOS is not set
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_SH_KGDB is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/sh7785lcr_defconfig b/arch/sh/configs/sh7785lcr_defconfig
new file mode 100644
index 000000000000..ff72697365d1
--- /dev/null
+++ b/arch/sh/configs/sh7785lcr_defconfig
@@ -0,0 +1,1388 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc8
+# Tue Jul 15 21:37:59 2008
+#
+CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_SYS_SUPPORTS_NUMA=y
+CONFIG_SYS_SUPPORTS_PCI=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_IO_TRAPPED=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+# CONFIG_OPROFILE is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System type
+#
+CONFIG_CPU_SH4=y
+CONFIG_CPU_SH4A=y
+CONFIG_CPU_SHX2=y
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+CONFIG_CPU_SUBTYPE_SH7785=y
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
+
+#
+# Memory management options
+#
+CONFIG_QUICKLIST=y
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_MEMORY_START=0x08000000
+CONFIG_MEMORY_SIZE=0x08000000
+CONFIG_29BIT=y
+# CONFIG_PMB is not set
+# CONFIG_X2TLB is not set
+CONFIG_VSYSCALL=y
+# CONFIG_NUMA is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=2
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+# CONFIG_MEMORY_HOTPLUG is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_SH_FPU=y
+CONFIG_SH_STORE_QUEUES=y
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_PTEA=y
+CONFIG_CPU_HAS_FPU=y
+
+#
+# Board support
+#
+# CONFIG_SH_HIGHLANDER is not set
+CONFIG_SH_SH7785LCR=y
+CONFIG_SH_SH7785LCR_29BIT_PHYSMAPS=y
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=28
+CONFIG_SH_PCLK_FREQ=50000000
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+
+#
+# Additional SuperH Device Drivers
+#
+CONFIG_HEARTBEAT=y
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_KEXEC=y
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_GUSA=y
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+# CONFIG_CMDLINE_BOOL is not set
+
+#
+# Bus options
+#
+CONFIG_PCI=y
+CONFIG_SH_PCIDMA_NONCOHERENT=y
+CONFIG_PCI_AUTO=y
+CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x00000000
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+CONFIG_SATA_SIL=y
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_NET_ETHERNET is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+CONFIG_R8169=y
+# CONFIG_R8169_NAPI is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SH_KEYSC is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=6
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_ALGOPCA=y
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+CONFIG_I2C_PCA_PLATFORM=y
+# CONFIG_I2C_SH_MOBILE is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+CONFIG_MFD_SM501=y
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+CONFIG_FB_SM501=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_LOGO_SUPERH_MONO is not set
+# CONFIG_LOGO_SUPERH_VGA16 is not set
+# CONFIG_LOGO_SUPERH_CLUT224 is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=m
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=m
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+CONFIG_USB_R8A66597_HCD=y
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_TEST=m
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+CONFIG_RTC_DRV_RS5C372=y
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_SH is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=y
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+CONFIG_NLS_CODEPAGE_932=y
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_FRAME_POINTER is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_SH_STANDARD_BIOS is not set
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DEBUG_BOOTMEM is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_4KSTACKS is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_SH_KGDB is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+# CONFIG_CRYPTO_HW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/drivers/dma/dma-g2.c b/arch/sh/drivers/dma/dma-g2.c
index 0caf11bb7e27..af7bb589c2c8 100644
--- a/arch/sh/drivers/dma/dma-g2.c
+++ b/arch/sh/drivers/dma/dma-g2.c
@@ -14,8 +14,8 @@
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <asm/cacheflush.h>
-#include <asm/mach/sysasic.h>
-#include <asm/mach/dma.h>
+#include <mach/sysasic.h>
+#include <mach/dma.h>
 #include <asm/dma.h>
 
 struct g2_channel {
diff --git a/arch/sh/drivers/dma/dma-pvr2.c b/arch/sh/drivers/dma/dma-pvr2.c
index 838fad566eaf..391cbe1c2956 100644
--- a/arch/sh/drivers/dma/dma-pvr2.c
+++ b/arch/sh/drivers/dma/dma-pvr2.c
@@ -13,8 +13,8 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
-#include <asm/mach/sysasic.h>
-#include <asm/mach/dma.h>
+#include <mach/sysasic.h>
+#include <mach/dma.h>
 #include <asm/dma.h>
 #include <asm/io.h>
 
diff --git a/arch/sh/drivers/dma/dma-sh.c b/arch/sh/drivers/dma/dma-sh.c
index 71ff3d6f26e2..b2ffe649c7c0 100644
--- a/arch/sh/drivers/dma/dma-sh.c
+++ b/arch/sh/drivers/dma/dma-sh.c
@@ -14,7 +14,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
-#include <asm/dreamcast/dma.h>
+#include <mach-dreamcast/mach/dma.h>
 #include <asm/dma.h>
 #include <asm/io.h>
 #include "dma-sh.h"
diff --git a/arch/sh/drivers/dma/dma-sh.h b/arch/sh/drivers/dma/dma-sh.h
index 0f591fbc922d..b05af34fc15d 100644
--- a/arch/sh/drivers/dma/dma-sh.h
+++ b/arch/sh/drivers/dma/dma-sh.h
@@ -11,7 +11,7 @@
 #ifndef __DMA_SH_H
 #define __DMA_SH_H
 
-#include <asm/cpu/dma.h>
+#include <cpu/dma.h>
 
 /* Definitions for the SuperH DMAC */
 #define REQ_L   0x00000000
diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile
index 0718805774e8..847e90894d1b 100644
--- a/arch/sh/drivers/pci/Makefile
+++ b/arch/sh/drivers/pci/Makefile
@@ -23,3 +23,4 @@ obj-$(CONFIG_SH_LANDISK)		+= ops-landisk.o
 obj-$(CONFIG_SH_LBOX_RE2)               += ops-lboxre2.o fixups-lboxre2.o
 obj-$(CONFIG_SH_7780_SOLUTION_ENGINE)   += ops-se7780.o fixups-se7780.o
 obj-$(CONFIG_SH_CAYMAN)                 += ops-cayman.o
+obj-$(CONFIG_SH_SH7785LCR)              += ops-sh7785lcr.o fixups-sh7785lcr.o
diff --git a/arch/sh/drivers/pci/fixups-dreamcast.c b/arch/sh/drivers/pci/fixups-dreamcast.c
index c44699301eeb..2bf85cf091e1 100644
--- a/arch/sh/drivers/pci/fixups-dreamcast.c
+++ b/arch/sh/drivers/pci/fixups-dreamcast.c
@@ -26,7 +26,7 @@
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/mach/pci.h>
+#include <mach/pci.h>
 
 static void __init gapspci_fixup_resources(struct pci_dev *dev)
 {
diff --git a/arch/sh/drivers/pci/fixups-sh7785lcr.c b/arch/sh/drivers/pci/fixups-sh7785lcr.c
new file mode 100644
index 000000000000..4949e601387a
--- /dev/null
+++ b/arch/sh/drivers/pci/fixups-sh7785lcr.c
@@ -0,0 +1,46 @@
+/*
+ * arch/sh/drivers/pci/fixups-sh7785lcr.c
+ *
+ * R0P7785LC0011RL PCI fixups
+ * Copyright (C) 2008  Yoshihiro Shimoda
+ *
+ * Based on arch/sh/drivers/pci/fixups-r7780rp.c
+ * Copyright (C) 2003  Lineo uSolutions, Inc.
+ * Copyright (C) 2004 - 2006  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/pci.h>
+#include "pci-sh4.h"
+
+int pci_fixup_pcic(void)
+{
+        pci_write_reg(0x000043ff, SH4_PCIINTM);
+        pci_write_reg(0x0000380f, SH4_PCIAINTM);
+
+        pci_write_reg(0xfbb00047, SH7780_PCICMD);
+        pci_write_reg(0x00000000, SH7780_PCIIBAR);
+
+        pci_write_reg(0x00011912, SH7780_PCISVID);
+        pci_write_reg(0x08000000, SH7780_PCICSCR0);
+        pci_write_reg(0x0000001b, SH7780_PCICSAR0);
+        pci_write_reg(0xfd000000, SH7780_PCICSCR1);
+        pci_write_reg(0x0000000f, SH7780_PCICSAR1);
+
+        pci_write_reg(0xfd000000, SH7780_PCIMBR0);
+        pci_write_reg(0x00fc0000, SH7780_PCIMBMR0);
+
+#ifdef CONFIG_32BIT
+        pci_write_reg(0xc0000000, SH7780_PCIMBR2);
+        pci_write_reg(0x20000000 - SH7780_PCI_IO_SIZE, SH7780_PCIMBMR2);
+#endif
+
+        /* Set IOBR for windows containing area specified in pci.h */
+        pci_write_reg((PCIBIOS_MIN_IO & ~(SH7780_PCI_IO_SIZE - 1)),
+                      SH7780_PCIIOBR);
+        pci_write_reg(((SH7780_PCI_IO_SIZE - 1) & (7 << 18)), SH7780_PCIIOBMR);
+
+        return 0;
+}
diff --git a/arch/sh/drivers/pci/ops-cayman.c b/arch/sh/drivers/pci/ops-cayman.c
index 980275ffa30b..5ccf9ea3a9de 100644
--- a/arch/sh/drivers/pci/ops-cayman.c
+++ b/arch/sh/drivers/pci/ops-cayman.c
@@ -2,7 +2,7 @@
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/types.h>
-#include <asm/cpu/irq.h>
+#include <cpu/irq.h>
 #include "pci-sh5.h"
 
 static inline u8 bridge_swizzle(u8 pin, u8 slot)
diff --git a/arch/sh/drivers/pci/ops-dreamcast.c b/arch/sh/drivers/pci/ops-dreamcast.c
index e1284fc69361..f5d2a2aa6f3f 100644
--- a/arch/sh/drivers/pci/ops-dreamcast.c
+++ b/arch/sh/drivers/pci/ops-dreamcast.c
@@ -22,10 +22,11 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/pci.h>
+#include <linux/module.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/mach/pci.h>
+#include <mach/pci.h>
 
 static struct resource gapspci_io_resource = {
         .name   = "GAPSPCI IO",
@@ -48,6 +49,7 @@ struct pci_channel board_pci_channels[] = {
           &gapspci_mem_resource, 0, 1 },
         { 0, }
 };
+EXPORT_SYMBOL(board_pci_channels);
 
 /*
  * The !gapspci_config_access case really shouldn't happen, ever, unless
diff --git a/arch/sh/drivers/pci/ops-se7780.c b/arch/sh/drivers/pci/ops-se7780.c
index bbdb48c124a2..3145c62484d6 100644
--- a/arch/sh/drivers/pci/ops-se7780.c
+++ b/arch/sh/drivers/pci/ops-se7780.c
@@ -13,7 +13,7 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/pci.h>
-#include <asm/se7780.h>
+#include <mach-se/mach/se7780.h>
 #include <asm/io.h>
 #include "pci-sh4.h"
 
diff --git a/arch/sh/drivers/pci/ops-sh7785lcr.c b/arch/sh/drivers/pci/ops-sh7785lcr.c
new file mode 100644
index 000000000000..b3bd68702059
--- /dev/null
+++ b/arch/sh/drivers/pci/ops-sh7785lcr.c
@@ -0,0 +1,66 @@
+/*
+ * Author:  Ian DaSilva (idasilva@mvista.com)
+ *
+ * Highly leveraged from pci-bigsur.c, written by Dustin McIntire.
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * PCI initialization for the Renesas R0P7785LC0011RL board
+ * Based on arch/sh/drivers/pci/ops-r7780rp.c
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include "pci-sh4.h"
+
+static char irq_tab[] __initdata = {
+        65, 66, 67, 68,
+};
+
+int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
+{
+        return irq_tab[slot];
+}
+
+static struct resource sh7785_io_resource = {
+        .name   = "SH7785_IO",
+        .start  = SH7780_PCI_IO_BASE,
+        .end    = SH7780_PCI_IO_BASE + SH7780_PCI_IO_SIZE - 1,
+        .flags  = IORESOURCE_IO
+};
+
+static struct resource sh7785_mem_resource = {
+        .name   = "SH7785_mem",
+        .start  = SH7780_PCI_MEMORY_BASE,
+        .end    = SH7780_PCI_MEMORY_BASE + SH7780_PCI_MEM_SIZE - 1,
+        .flags  = IORESOURCE_MEM
+};
+
+struct pci_channel board_pci_channels[] = {
+        { &sh4_pci_ops, &sh7785_io_resource, &sh7785_mem_resource, 0, 0xff },
+        { NULL, NULL, NULL, 0, 0 },
+};
+EXPORT_SYMBOL(board_pci_channels);
+
+static struct sh4_pci_address_map sh7785_pci_map = {
+        .window0        = {
+                .base   = SH7780_CS2_BASE_ADDR,
+                .size   = 0x04000000,
+        },
+
+        .window1        = {
+                .base   = SH7780_CS3_BASE_ADDR,
+                .size   = 0x04000000,
+        },
+
+        .flags  = SH4_PCIC_NO_RESET,
+};
+
+int __init pcibios_init_platform(void)
+{
+        return sh7780_pcic_init(&sh7785_pci_map);
+}
diff --git a/arch/sh/drivers/pci/pci-auto.c b/arch/sh/drivers/pci/pci-auto.c
index ea404704ace8..cf48b12ee58c 100644
--- a/arch/sh/drivers/pci/pci-auto.c
+++ b/arch/sh/drivers/pci/pci-auto.c
@@ -78,7 +78,7 @@ static struct pci_dev *fake_pci_dev(struct pci_channel *hose,
 }
 
 #define EARLY_PCI_OP(rw, size, type)                                    \
-int early_##rw##_config_##size(struct pci_channel *hose,                \
+static int early_##rw##_config_##size(struct pci_channel *hose,         \
         int top_bus, int bus, int devfn, int offset, type value)        \
 {                                                                       \
         return pci_##rw##_config_##size(                                \
diff --git a/arch/sh/drivers/pci/pci-sh5.c b/arch/sh/drivers/pci/pci-sh5.c
index a00a4df8c02d..7a97438762c8 100644
--- a/arch/sh/drivers/pci/pci-sh5.c
+++ b/arch/sh/drivers/pci/pci-sh5.c
@@ -19,7 +19,7 @@
 #include <linux/delay.h>
 #include <linux/types.h>
 #include <linux/irq.h>
-#include <asm/cpu/irq.h>
+#include <cpu/irq.h>
 #include <asm/pci.h>
 #include <asm/io.h>
 #include "pci-sh5.h"
diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c
index f57095a2617c..d3839e609aac 100644
--- a/arch/sh/drivers/pci/pci.c
+++ b/arch/sh/drivers/pci/pci.c
@@ -135,7 +135,7 @@ int pcibios_enable_device(struct pci_dev *dev, int mask)
  *  If we set up a device for bus mastering, we need to check and set
  *  the latency timer as it may not be properly set.
  */
-unsigned int pcibios_max_latency = 255;
+static unsigned int pcibios_max_latency = 255;
 
 void pcibios_set_master(struct pci_dev *dev)
 {
diff --git a/arch/sh/include/asm/.gitignore b/arch/sh/include/asm/.gitignore
new file mode 100644
index 000000000000..378db779fb6c
--- /dev/null
+++ b/arch/sh/include/asm/.gitignore
@@ -0,0 +1 @@
+machtypes.h
diff --git a/include/asm-sh/Kbuild b/arch/sh/include/asm/Kbuild
index 43910cdf78a5..43910cdf78a5 100644
--- a/include/asm-sh/Kbuild
+++ b/arch/sh/include/asm/Kbuild
diff --git a/include/asm-sh/a.out.h b/arch/sh/include/asm/a.out.h
index 1f93130e179c..1f93130e179c 100644
--- a/include/asm-sh/a.out.h
+++ b/arch/sh/include/asm/a.out.h
diff --git a/arch/sh/include/asm/adc.h b/arch/sh/include/asm/adc.h
new file mode 100644
index 000000000000..48824c1fab80
--- /dev/null
+++ b/arch/sh/include/asm/adc.h
@@ -0,0 +1,13 @@
+#ifndef __ASM_ADC_H
+#define __ASM_ADC_H
+#ifdef __KERNEL__
+/*
+ * Copyright (C) 2004  Andriy Skulysh
+ */
+
+#include <cpu/adc.h>
+
+int adc_single(unsigned int channel);
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_ADC_H */
diff --git a/arch/sh/include/asm/addrspace.h b/arch/sh/include/asm/addrspace.h
new file mode 100644
index 000000000000..2702d81bfc0d
--- /dev/null
+++ b/arch/sh/include/asm/addrspace.h
@@ -0,0 +1,53 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1999 by Kaz Kojima
+ *
+ * Defitions for the address spaces of the SH CPUs.
+ */
+#ifndef __ASM_SH_ADDRSPACE_H
+#define __ASM_SH_ADDRSPACE_H
+
+#ifdef __KERNEL__
+
+#include <cpu/addrspace.h>
+
+/* If this CPU supports segmentation, hook up the helpers */
+#ifdef P1SEG
+
+/*
+   [ P0/U0 (virtual) ]          0x00000000     <------ User space
+   [ P1 (fixed)   cached ]      0x80000000     <------ Kernel space
+   [ P2 (fixed)  non-cachable]  0xA0000000     <------ Physical access
+   [ P3 (virtual) cached]       0xC0000000     <------ vmalloced area
+   [ P4 control   ]             0xE0000000
+ */
+
+/* Returns the privileged segment base of a given address  */
+#define PXSEG(a)        (((unsigned long)(a)) & 0xe0000000)
+
+/* Returns the physical address of a PnSEG (n=1,2) address   */
+#define PHYSADDR(a)     (((unsigned long)(a)) & 0x1fffffff)
+
+#ifdef CONFIG_29BIT
+/*
+ * Map an address to a certain privileged segment
+ */
+#define P1SEGADDR(a)    \
+        ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P1SEG))
+#define P2SEGADDR(a)    \
+        ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P2SEG))
+#define P3SEGADDR(a)    \
+        ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P3SEG))
+#define P4SEGADDR(a)    \
+        ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P4SEG))
+#endif /* 29BIT */
+#endif /* P1SEG */
+
+/* Check if an address can be reached in 29 bits */
+#define IS_29BIT(a)     (((unsigned long)(a)) < 0x20000000)
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_ADDRSPACE_H */
diff --git a/include/asm-sh/atomic-grb.h b/arch/sh/include/asm/atomic-grb.h
index 4c5b7dbfcedb..4c5b7dbfcedb 100644
--- a/include/asm-sh/atomic-grb.h
+++ b/arch/sh/include/asm/atomic-grb.h
diff --git a/include/asm-sh/atomic-irq.h b/arch/sh/include/asm/atomic-irq.h
index 74f7943cff6f..74f7943cff6f 100644
--- a/include/asm-sh/atomic-irq.h
+++ b/arch/sh/include/asm/atomic-irq.h
diff --git a/include/asm-sh/atomic-llsc.h b/arch/sh/include/asm/atomic-llsc.h
index 4b00b78e3f4f..4b00b78e3f4f 100644
--- a/include/asm-sh/atomic-llsc.h
+++ b/arch/sh/include/asm/atomic-llsc.h
diff --git a/include/asm-sh/atomic.h b/arch/sh/include/asm/atomic.h
index c043ef003028..c043ef003028 100644
--- a/include/asm-sh/atomic.h
+++ b/arch/sh/include/asm/atomic.h
diff --git a/arch/sh/include/asm/auxvec.h b/arch/sh/include/asm/auxvec.h
new file mode 100644
index 000000000000..483effd65e00
--- /dev/null
+++ b/arch/sh/include/asm/auxvec.h
@@ -0,0 +1,36 @@
+#ifndef __ASM_SH_AUXVEC_H
+#define __ASM_SH_AUXVEC_H
+
+/*
+ * Architecture-neutral AT_ values in 0-17, leave some room
+ * for more of them.
+ */
+
+/*
+ * This entry gives some information about the FPU initialization
+ * performed by the kernel.
+ */
+#define AT_FPUCW                18      /* Used FPU control word.  */
+
+#if defined(CONFIG_VSYSCALL) || !defined(__KERNEL__)
+/*
+ * Only define this in the vsyscall case, the entry point to
+ * the vsyscall page gets placed here. The kernel will attempt
+ * to build a gate VMA we don't care about otherwise..
+ */
+#define AT_SYSINFO_EHDR         33
+#endif
+
+/*
+ * More complete cache descriptions than AT_[DIU]CACHEBSIZE.  If the
+ * value is -1, then the cache doesn't exist.  Otherwise:
+ *
+ *    bit 0-3:    Cache set-associativity; 0 means fully associative.
+ *    bit 4-7:    Log2 of cacheline size.
+ *    bit 8-31:   Size of the entire cache >> 8.
+ */
+#define AT_L1I_CACHESHAPE       34
+#define AT_L1D_CACHESHAPE       35
+#define AT_L2_CACHESHAPE        36
+
+#endif /* __ASM_SH_AUXVEC_H */
diff --git a/include/asm-sh/bitops-grb.h b/arch/sh/include/asm/bitops-grb.h
index a5907b94395b..a5907b94395b 100644
--- a/include/asm-sh/bitops-grb.h
+++ b/arch/sh/include/asm/bitops-grb.h
diff --git a/include/asm-sh/bitops-irq.h b/arch/sh/include/asm/bitops-irq.h
index 653a12750584..653a12750584 100644
--- a/include/asm-sh/bitops-irq.h
+++ b/arch/sh/include/asm/bitops-irq.h
diff --git a/include/asm-sh/bitops.h b/arch/sh/include/asm/bitops.h
index d7d382f63ee5..d7d382f63ee5 100644
--- a/include/asm-sh/bitops.h
+++ b/arch/sh/include/asm/bitops.h
diff --git a/include/asm-sh/bug.h b/arch/sh/include/asm/bug.h
index c01718040166..c01718040166 100644
--- a/include/asm-sh/bug.h
+++ b/arch/sh/include/asm/bug.h
diff --git a/include/asm-sh/bugs.h b/arch/sh/include/asm/bugs.h
index 121b2ecddfc3..121b2ecddfc3 100644
--- a/include/asm-sh/bugs.h
+++ b/arch/sh/include/asm/bugs.h
diff --git a/include/asm-sh/byteorder.h b/arch/sh/include/asm/byteorder.h
index 4c13e6117563..4c13e6117563 100644
--- a/include/asm-sh/byteorder.h
+++ b/arch/sh/include/asm/byteorder.h
diff --git a/arch/sh/include/asm/cache.h b/arch/sh/include/asm/cache.h
new file mode 100644
index 000000000000..02df18ea9608
--- /dev/null
+++ b/arch/sh/include/asm/cache.h
@@ -0,0 +1,51 @@
+/* $Id: cache.h,v 1.6 2004/03/11 18:08:05 lethal Exp $
+ *
+ * include/asm-sh/cache.h
+ *
+ * Copyright 1999 (C) Niibe Yutaka
+ * Copyright 2002, 2003 (C) Paul Mundt
+ */
+#ifndef __ASM_SH_CACHE_H
+#define __ASM_SH_CACHE_H
+#ifdef __KERNEL__
+
+#include <linux/init.h>
+#include <cpu/cache.h>
+
+#define L1_CACHE_BYTES          (1 << L1_CACHE_SHIFT)
+
+#define __read_mostly __attribute__((__section__(".data.read_mostly")))
+
+#ifndef __ASSEMBLY__
+struct cache_info {
+        unsigned int ways;              /* Number of cache ways */
+        unsigned int sets;              /* Number of cache sets */
+        unsigned int linesz;            /* Cache line size (bytes) */
+
+        unsigned int way_size;          /* sets * line size */
+
+        /*
+         * way_incr is the address offset for accessing the next way
+         * in memory mapped cache array ops.
+         */
+        unsigned int way_incr;
+        unsigned int entry_shift;
+        unsigned int entry_mask;
+
+        /*
+         * Compute a mask which selects the address bits which overlap between
+         * 1. those used to select the cache set during indexing
+         * 2. those in the physical page number.
+         */
+        unsigned int alias_mask;
+
+        unsigned int n_aliases;         /* Number of aliases */
+
+        unsigned long flags;
+};
+
+int __init detect_cpu_and_cache_system(void);
+
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_CACHE_H */
diff --git a/arch/sh/include/asm/cacheflush.h b/arch/sh/include/asm/cacheflush.h
new file mode 100644
index 000000000000..09acbc32d6c7
--- /dev/null
+++ b/arch/sh/include/asm/cacheflush.h
@@ -0,0 +1,81 @@
+#ifndef __ASM_SH_CACHEFLUSH_H
+#define __ASM_SH_CACHEFLUSH_H
+
+#ifdef __KERNEL__
+
+#ifdef CONFIG_CACHE_OFF
+/*
+ * Nothing to do when the cache is disabled, initial flush and explicit
+ * disabling is handled at CPU init time.
+ *
+ * See arch/sh/kernel/cpu/init.c:cache_init().
+ */
+#define p3_cache_init()                         do { } while (0)
+#define flush_cache_all()                       do { } while (0)
+#define flush_cache_mm(mm)                      do { } while (0)
+#define flush_cache_dup_mm(mm)                  do { } while (0)
+#define flush_cache_range(vma, start, end)      do { } while (0)
+#define flush_cache_page(vma, vmaddr, pfn)      do { } while (0)
+#define flush_dcache_page(page)                 do { } while (0)
+#define flush_icache_range(start, end)          do { } while (0)
+#define flush_icache_page(vma,pg)               do { } while (0)
+#define flush_dcache_mmap_lock(mapping)         do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)       do { } while (0)
+#define flush_cache_sigtramp(vaddr)             do { } while (0)
+#define flush_icache_user_range(vma,pg,adr,len) do { } while (0)
+#define __flush_wback_region(start, size)       do { (void)(start); } while (0)
+#define __flush_purge_region(start, size)       do { (void)(start); } while (0)
+#define __flush_invalidate_region(start, size)  do { (void)(start); } while (0)
+#else
+#include <cpu/cacheflush.h>
+
+/*
+ * Consistent DMA requires that the __flush_xxx() primitives must be set
+ * for any of the enabled non-coherent caches (most of the UP CPUs),
+ * regardless of PIPT or VIPT cache configurations.
+ */
+
+/* Flush (write-back only) a region (smaller than a page) */
+extern void __flush_wback_region(void *start, int size);
+/* Flush (write-back & invalidate) a region (smaller than a page) */
+extern void __flush_purge_region(void *start, int size);
+/* Flush (invalidate only) a region (smaller than a page) */
+extern void __flush_invalidate_region(void *start, int size);
+#endif
+
+#define ARCH_HAS_FLUSH_KERNEL_DCACHE_PAGE
+static inline void flush_kernel_dcache_page(struct page *page)
+{
+        flush_dcache_page(page);
+}
+
+#if defined(CONFIG_CPU_SH4) && !defined(CONFIG_CACHE_OFF)
+extern void copy_to_user_page(struct vm_area_struct *vma,
+        struct page *page, unsigned long vaddr, void *dst, const void *src,
+        unsigned long len);
+
+extern void copy_from_user_page(struct vm_area_struct *vma,
+        struct page *page, unsigned long vaddr, void *dst, const void *src,
+        unsigned long len);
+#else
+#define copy_to_user_page(vma, page, vaddr, dst, src, len)      \
+        do {                                                    \
+                flush_cache_page(vma, vaddr, page_to_pfn(page));\
+                memcpy(dst, src, len);                          \
+                flush_icache_user_range(vma, page, vaddr, len); \
+        } while (0)
+
+#define copy_from_user_page(vma, page, vaddr, dst, src, len)    \
+        do {                                                    \
+                flush_cache_page(vma, vaddr, page_to_pfn(page));\
+                memcpy(dst, src, len);                          \
+        } while (0)
+#endif
+
+#define flush_cache_vmap(start, end)            flush_cache_all()
+#define flush_cache_vunmap(start, end)          flush_cache_all()
+
+#define HAVE_ARCH_UNMAPPED_AREA
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_CACHEFLUSH_H */
diff --git a/include/asm-sh/checksum.h b/arch/sh/include/asm/checksum.h
index 67496ab0ef04..67496ab0ef04 100644
--- a/include/asm-sh/checksum.h
+++ b/arch/sh/include/asm/checksum.h
diff --git a/include/asm-sh/checksum_32.h b/arch/sh/include/asm/checksum_32.h
index 14b7ac2f0a07..14b7ac2f0a07 100644
--- a/include/asm-sh/checksum_32.h
+++ b/arch/sh/include/asm/checksum_32.h
diff --git a/include/asm-sh/checksum_64.h b/arch/sh/include/asm/checksum_64.h
index 9c62a031a8f5..9c62a031a8f5 100644
--- a/include/asm-sh/checksum_64.h
+++ b/arch/sh/include/asm/checksum_64.h
diff --git a/arch/sh/include/asm/clock.h b/arch/sh/include/asm/clock.h
new file mode 100644
index 000000000000..720dfab7b15e
--- /dev/null
+++ b/arch/sh/include/asm/clock.h
@@ -0,0 +1,97 @@
+#ifndef __ASM_SH_CLOCK_H
+#define __ASM_SH_CLOCK_H
+
+#include <linux/kref.h>
+#include <linux/list.h>
+#include <linux/seq_file.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+struct clk;
+
+struct clk_ops {
+        void (*init)(struct clk *clk);
+        void (*enable)(struct clk *clk);
+        void (*disable)(struct clk *clk);
+        void (*recalc)(struct clk *clk);
+        int (*set_rate)(struct clk *clk, unsigned long rate, int algo_id);
+        long (*round_rate)(struct clk *clk, unsigned long rate);
+};
+
+struct clk {
+        struct list_head        node;
+        const char              *name;
+        int                     id;
+        struct module           *owner;
+
+        struct clk              *parent;
+        struct clk_ops          *ops;
+
+        struct kref             kref;
+
+        unsigned long           rate;
+        unsigned long           flags;
+        unsigned long           arch_flags;
+};
+
+#define CLK_ALWAYS_ENABLED      (1 << 0)
+#define CLK_RATE_PROPAGATES     (1 << 1)
+
+/* Should be defined by processor-specific code */
+void arch_init_clk_ops(struct clk_ops **, int type);
+
+/* arch/sh/kernel/cpu/clock.c */
+int clk_init(void);
+
+void clk_recalc_rate(struct clk *);
+
+int clk_register(struct clk *);
+void clk_unregister(struct clk *);
+
+static inline int clk_always_enable(const char *id)
+{
+        struct clk *clk;
+        int ret;
+
+        clk = clk_get(NULL, id);
+        if (IS_ERR(clk))
+                return PTR_ERR(clk);
+
+        ret = clk_enable(clk);
+        if (ret)
+                clk_put(clk);
+
+        return ret;
+}
+
+/* the exported API, in addition to clk_set_rate */
+/**
+ * clk_set_rate_ex - set the clock rate for a clock source, with additional parameter
+ * @clk: clock source
+ * @rate: desired clock rate in Hz
+ * @algo_id: algorithm id to be passed down to ops->set_rate
+ *
+ * Returns success (0) or negative errno.
+ */
+int clk_set_rate_ex(struct clk *clk, unsigned long rate, int algo_id);
+
+enum clk_sh_algo_id {
+        NO_CHANGE = 0,
+
+        IUS_N1_N1,
+        IUS_322,
+        IUS_522,
+        IUS_N11,
+
+        SB_N1,
+
+        SB3_N1,
+        SB3_32,
+        SB3_43,
+        SB3_54,
+
+        BP_N1,
+
+        IP_N1,
+};
+#endif /* __ASM_SH_CLOCK_H */
diff --git a/include/asm-sh/cmpxchg-grb.h b/arch/sh/include/asm/cmpxchg-grb.h
index e2681abe764f..e2681abe764f 100644
--- a/include/asm-sh/cmpxchg-grb.h
+++ b/arch/sh/include/asm/cmpxchg-grb.h
diff --git a/include/asm-sh/cmpxchg-irq.h b/arch/sh/include/asm/cmpxchg-irq.h
index 43049ec0554b..43049ec0554b 100644
--- a/include/asm-sh/cmpxchg-irq.h
+++ b/arch/sh/include/asm/cmpxchg-irq.h
diff --git a/include/asm-sh/cpu-features.h b/arch/sh/include/asm/cpu-features.h
index 86308aa39731..86308aa39731 100644
--- a/include/asm-sh/cpu-features.h
+++ b/arch/sh/include/asm/cpu-features.h
diff --git a/include/asm-sh/cputime.h b/arch/sh/include/asm/cputime.h
index 6ca395d1393e..6ca395d1393e 100644
--- a/include/asm-sh/cputime.h
+++ b/arch/sh/include/asm/cputime.h
diff --git a/include/asm-sh/current.h b/arch/sh/include/asm/current.h
index 62b63880b333..62b63880b333 100644
--- a/include/asm-sh/current.h
+++ b/arch/sh/include/asm/current.h
diff --git a/include/asm-sh/delay.h b/arch/sh/include/asm/delay.h
index 4b16bf9b56bd..4b16bf9b56bd 100644
--- a/include/asm-sh/delay.h
+++ b/arch/sh/include/asm/delay.h
diff --git a/arch/sh/include/asm/device.h b/arch/sh/include/asm/device.h
new file mode 100644
index 000000000000..efd511d0803a
--- /dev/null
+++ b/arch/sh/include/asm/device.h
@@ -0,0 +1,12 @@
+/*
+ * Arch specific extensions to struct device
+ *
+ * This file is released under the GPLv2
+ */
+#include <asm-generic/device.h>
+
+struct platform_device;
+/* allocate contiguous memory chunk and fill in struct resource */
+int platform_resource_setup_memory(struct platform_device *pdev,
+                                   char *name, unsigned long memsize);
+
diff --git a/include/asm-sh/div64.h b/arch/sh/include/asm/div64.h
index 6cd978cefb28..6cd978cefb28 100644
--- a/include/asm-sh/div64.h
+++ b/arch/sh/include/asm/div64.h
diff --git a/arch/sh/include/asm/dma-mapping.h b/arch/sh/include/asm/dma-mapping.h
new file mode 100644
index 000000000000..627315ecdb52
--- /dev/null
+++ b/arch/sh/include/asm/dma-mapping.h
@@ -0,0 +1,193 @@
+#ifndef __ASM_SH_DMA_MAPPING_H
+#define __ASM_SH_DMA_MAPPING_H
+
+#include <linux/mm.h>
+#include <linux/scatterlist.h>
+#include <asm/cacheflush.h>
+#include <asm/io.h>
+#include <asm-generic/dma-coherent.h>
+
+extern struct bus_type pci_bus_type;
+
+#define dma_supported(dev, mask)        (1)
+
+static inline int dma_set_mask(struct device *dev, u64 mask)
+{
+        if (!dev->dma_mask || !dma_supported(dev, mask))
+                return -EIO;
+
+        *dev->dma_mask = mask;
+
+        return 0;
+}
+
+void *dma_alloc_coherent(struct device *dev, size_t size,
+                         dma_addr_t *dma_handle, gfp_t flag);
+
+void dma_free_coherent(struct device *dev, size_t size,
+                       void *vaddr, dma_addr_t dma_handle);
+
+void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
+                    enum dma_data_direction dir);
+
+#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
+#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
+#define dma_is_consistent(d, h) (1)
+
+static inline dma_addr_t dma_map_single(struct device *dev,
+                                        void *ptr, size_t size,
+                                        enum dma_data_direction dir)
+{
+#if defined(CONFIG_PCI) && !defined(CONFIG_SH_PCIDMA_NONCOHERENT)
+        if (dev->bus == &pci_bus_type)
+                return virt_to_phys(ptr);
+#endif
+        dma_cache_sync(dev, ptr, size, dir);
+
+        return virt_to_phys(ptr);
+}
+
+#define dma_unmap_single(dev, addr, size, dir)  do { } while (0)
+
+static inline int dma_map_sg(struct device *dev, struct scatterlist *sg,
+                             int nents, enum dma_data_direction dir)
+{
+        int i;
+
+        for (i = 0; i < nents; i++) {
+#if !defined(CONFIG_PCI) || defined(CONFIG_SH_PCIDMA_NONCOHERENT)
+                dma_cache_sync(dev, sg_virt(&sg[i]), sg[i].length, dir);
+#endif
+                sg[i].dma_address = sg_phys(&sg[i]);
+        }
+
+        return nents;
+}
+
+#define dma_unmap_sg(dev, sg, nents, dir)       do { } while (0)
+
+static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
+                                      unsigned long offset, size_t size,
+                                      enum dma_data_direction dir)
+{
+        return dma_map_single(dev, page_address(page) + offset, size, dir);
+}
+
+static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
+                                  size_t size, enum dma_data_direction dir)
+{
+        dma_unmap_single(dev, dma_address, size, dir);
+}
+
+static inline void dma_sync_single(struct device *dev, dma_addr_t dma_handle,
+                                   size_t size, enum dma_data_direction dir)
+{
+#if defined(CONFIG_PCI) && !defined(CONFIG_SH_PCIDMA_NONCOHERENT)
+        if (dev->bus == &pci_bus_type)
+                return;
+#endif
+        dma_cache_sync(dev, phys_to_virt(dma_handle), size, dir);
+}
+
+static inline void dma_sync_single_range(struct device *dev,
+                                         dma_addr_t dma_handle,
+                                         unsigned long offset, size_t size,
+                                         enum dma_data_direction dir)
+{
+#if defined(CONFIG_PCI) && !defined(CONFIG_SH_PCIDMA_NONCOHERENT)
+        if (dev->bus == &pci_bus_type)
+                return;
+#endif
+        dma_cache_sync(dev, phys_to_virt(dma_handle) + offset, size, dir);
+}
+
+static inline void dma_sync_sg(struct device *dev, struct scatterlist *sg,
+                               int nelems, enum dma_data_direction dir)
+{
+        int i;
+
+        for (i = 0; i < nelems; i++) {
+#if !defined(CONFIG_PCI) || defined(CONFIG_SH_PCIDMA_NONCOHERENT)
+                dma_cache_sync(dev, sg_virt(&sg[i]), sg[i].length, dir);
+#endif
+                sg[i].dma_address = sg_phys(&sg[i]);
+        }
+}
+
+static inline void dma_sync_single_for_cpu(struct device *dev,
+                                           dma_addr_t dma_handle, size_t size,
+                                           enum dma_data_direction dir)
+{
+        dma_sync_single(dev, dma_handle, size, dir);
+}
+
+static inline void dma_sync_single_for_device(struct device *dev,
+                                              dma_addr_t dma_handle,
+                                              size_t size,
+                                              enum dma_data_direction dir)
+{
+        dma_sync_single(dev, dma_handle, size, dir);
+}
+
+static inline void dma_sync_single_range_for_cpu(struct device *dev,
+                                                 dma_addr_t dma_handle,
+                                                 unsigned long offset,
+                                                 size_t size,
+                                                 enum dma_data_direction direction)
+{
+        dma_sync_single_for_cpu(dev, dma_handle+offset, size, direction);
+}
+
+static inline void dma_sync_single_range_for_device(struct device *dev,
+                                                    dma_addr_t dma_handle,
+                                                    unsigned long offset,
+                                                    size_t size,
+                                                    enum dma_data_direction direction)
+{
+        dma_sync_single_for_device(dev, dma_handle+offset, size, direction);
+}
+
+
+static inline void dma_sync_sg_for_cpu(struct device *dev,
+                                       struct scatterlist *sg, int nelems,
+                                       enum dma_data_direction dir)
+{
+        dma_sync_sg(dev, sg, nelems, dir);
+}
+
+static inline void dma_sync_sg_for_device(struct device *dev,
+                                          struct scatterlist *sg, int nelems,
+                                          enum dma_data_direction dir)
+{
+        dma_sync_sg(dev, sg, nelems, dir);
+}
+
+
+static inline int dma_get_cache_alignment(void)
+{
+        /*
+         * Each processor family will define its own L1_CACHE_SHIFT,
+         * L1_CACHE_BYTES wraps to this, so this is always safe.
+         */
+        return L1_CACHE_BYTES;
+}
+
+static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
+{
+        return dma_addr == 0;
+}
+
+#define ARCH_HAS_DMA_DECLARE_COHERENT_MEMORY
+
+extern int
+dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr,
+                            dma_addr_t device_addr, size_t size, int flags);
+
+extern void
+dma_release_declared_memory(struct device *dev);
+
+extern void *
+dma_mark_declared_memory_occupied(struct device *dev,
+                                  dma_addr_t device_addr, size_t size);
+
+#endif /* __ASM_SH_DMA_MAPPING_H */
diff --git a/arch/sh/include/asm/dma.h b/arch/sh/include/asm/dma.h
new file mode 100644
index 000000000000..beca7128e2ab
--- /dev/null
+++ b/arch/sh/include/asm/dma.h
@@ -0,0 +1,166 @@
+/*
+ * include/asm-sh/dma.h
+ *
+ * Copyright (C) 2003, 2004  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_SH_DMA_H
+#define __ASM_SH_DMA_H
+#ifdef __KERNEL__
+
+#include <linux/spinlock.h>
+#include <linux/wait.h>
+#include <linux/sched.h>
+#include <linux/sysdev.h>
+#include <cpu/dma.h>
+
+/* The maximum address that we can perform a DMA transfer to on this platform */
+/* Don't define MAX_DMA_ADDRESS; it's useless on the SuperH and any
+   occurrence should be flagged as an error.  */
+/* But... */
+/* XXX: This is not applicable to SuperH, just needed for alloc_bootmem */
+#define MAX_DMA_ADDRESS         (PAGE_OFFSET+0x10000000)
+
+#ifdef CONFIG_NR_DMA_CHANNELS
+#  define MAX_DMA_CHANNELS      (CONFIG_NR_DMA_CHANNELS)
+#else
+#  define MAX_DMA_CHANNELS      (CONFIG_NR_ONCHIP_DMA_CHANNELS)
+#endif
+
+/*
+ * Read and write modes can mean drastically different things depending on the
+ * channel configuration. Consult your DMAC documentation and module
+ * implementation for further clues.
+ */
+#define DMA_MODE_READ           0x00
+#define DMA_MODE_WRITE          0x01
+#define DMA_MODE_MASK           0x01
+
+#define DMA_AUTOINIT            0x10
+
+/*
+ * DMAC (dma_info) flags
+ */
+enum {
+        DMAC_CHANNELS_CONFIGURED        = 0x01,
+        DMAC_CHANNELS_TEI_CAPABLE       = 0x02, /* Transfer end interrupt */
+};
+
+/*
+ * DMA channel capabilities / flags
+ */
+enum {
+        DMA_CONFIGURED                  = 0x01,
+
+        /*
+         * Transfer end interrupt, inherited from DMAC.
+         * wait_queue used in dma_wait_for_completion.
+         */
+        DMA_TEI_CAPABLE                 = 0x02,
+};
+
+extern spinlock_t dma_spin_lock;
+
+struct dma_channel;
+
+struct dma_ops {
+        int (*request)(struct dma_channel *chan);
+        void (*free)(struct dma_channel *chan);
+
+        int (*get_residue)(struct dma_channel *chan);
+        int (*xfer)(struct dma_channel *chan);
+        int (*configure)(struct dma_channel *chan, unsigned long flags);
+        int (*extend)(struct dma_channel *chan, unsigned long op, void *param);
+};
+
+struct dma_channel {
+        char dev_id[16];                /* unique name per DMAC of channel */
+
+        unsigned int chan;              /* DMAC channel number */
+        unsigned int vchan;             /* Virtual channel number */
+
+        unsigned int mode;
+        unsigned int count;
+
+        unsigned long sar;
+        unsigned long dar;
+
+        const char **caps;
+
+        unsigned long flags;
+        atomic_t busy;
+
+        wait_queue_head_t wait_queue;
+
+        struct sys_device dev;
+        void *priv_data;
+};
+
+struct dma_info {
+        struct platform_device *pdev;
+
+        const char *name;
+        unsigned int nr_channels;
+        unsigned long flags;
+
+        struct dma_ops *ops;
+        struct dma_channel *channels;
+
+        struct list_head list;
+        int first_channel_nr;
+        int first_vchannel_nr;
+};
+
+struct dma_chan_caps {
+        int ch_num;
+        const char **caplist;
+};
+
+#define to_dma_channel(channel) container_of(channel, struct dma_channel, dev)
+
+/* arch/sh/drivers/dma/dma-api.c */
+extern int dma_xfer(unsigned int chan, unsigned long from,
+                    unsigned long to, size_t size, unsigned int mode);
+
+#define dma_write(chan, from, to, size) \
+        dma_xfer(chan, from, to, size, DMA_MODE_WRITE)
+#define dma_write_page(chan, from, to)  \
+        dma_write(chan, from, to, PAGE_SIZE)
+
+#define dma_read(chan, from, to, size)  \
+        dma_xfer(chan, from, to, size, DMA_MODE_READ)
+#define dma_read_page(chan, from, to)   \
+        dma_read(chan, from, to, PAGE_SIZE)
+
+extern int request_dma_bycap(const char **dmac, const char **caps,
+                             const char *dev_id);
+extern int request_dma(unsigned int chan, const char *dev_id);
+extern void free_dma(unsigned int chan);
+extern int get_dma_residue(unsigned int chan);
+extern struct dma_info *get_dma_info(unsigned int chan);
+extern struct dma_channel *get_dma_channel(unsigned int chan);
+extern void dma_wait_for_completion(unsigned int chan);
+extern void dma_configure_channel(unsigned int chan, unsigned long flags);
+
+extern int register_dmac(struct dma_info *info);
+extern void unregister_dmac(struct dma_info *info);
+extern struct dma_info *get_dma_info_by_name(const char *dmac_name);
+
+extern int dma_extend(unsigned int chan, unsigned long op, void *param);
+extern int register_chan_caps(const char *dmac, struct dma_chan_caps *capslist);
+
+/* arch/sh/drivers/dma/dma-sysfs.c */
+extern int dma_create_sysfs_files(struct dma_channel *, struct dma_info *);
+extern void dma_remove_sysfs_files(struct dma_channel *, struct dma_info *);
+
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy    (0)
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_DMA_H */
diff --git a/include/asm-sh/dmabrg.h b/arch/sh/include/asm/dmabrg.h
index c5edba216cf1..c5edba216cf1 100644
--- a/include/asm-sh/dmabrg.h
+++ b/arch/sh/include/asm/dmabrg.h
diff --git a/include/asm-sh/edosk7705.h b/arch/sh/include/asm/edosk7705.h
index 5bdc9d9be3de..5bdc9d9be3de 100644
--- a/include/asm-sh/edosk7705.h
+++ b/arch/sh/include/asm/edosk7705.h
diff --git a/arch/sh/include/asm/elf.h b/arch/sh/include/asm/elf.h
new file mode 100644
index 000000000000..f01449a8d378
--- /dev/null
+++ b/arch/sh/include/asm/elf.h
@@ -0,0 +1,244 @@
+#ifndef __ASM_SH_ELF_H
+#define __ASM_SH_ELF_H
+
+#include <linux/utsname.h>
+#include <asm/auxvec.h>
+#include <asm/ptrace.h>
+#include <asm/user.h>
+
+/* ELF header e_flags defines */
+#define EF_SH_PIC               0x100   /* -fpic */
+#define EF_SH_FDPIC             0x8000  /* -mfdpic */
+
+/* SH (particularly SHcompact) relocation types  */
+#define R_SH_NONE               0
+#define R_SH_DIR32              1
+#define R_SH_REL32              2
+#define R_SH_DIR8WPN            3
+#define R_SH_IND12W             4
+#define R_SH_DIR8WPL            5
+#define R_SH_DIR8WPZ            6
+#define R_SH_DIR8BP             7
+#define R_SH_DIR8W              8
+#define R_SH_DIR8L              9
+#define R_SH_SWITCH16           25
+#define R_SH_SWITCH32           26
+#define R_SH_USES               27
+#define R_SH_COUNT              28
+#define R_SH_ALIGN              29
+#define R_SH_CODE               30
+#define R_SH_DATA               31
+#define R_SH_LABEL              32
+#define R_SH_SWITCH8            33
+#define R_SH_GNU_VTINHERIT      34
+#define R_SH_GNU_VTENTRY        35
+#define R_SH_TLS_GD_32          144
+#define R_SH_TLS_LD_32          145
+#define R_SH_TLS_LDO_32         146
+#define R_SH_TLS_IE_32          147
+#define R_SH_TLS_LE_32          148
+#define R_SH_TLS_DTPMOD32       149
+#define R_SH_TLS_DTPOFF32       150
+#define R_SH_TLS_TPOFF32        151
+#define R_SH_GOT32              160
+#define R_SH_PLT32              161
+#define R_SH_COPY               162
+#define R_SH_GLOB_DAT           163
+#define R_SH_JMP_SLOT           164
+#define R_SH_RELATIVE           165
+#define R_SH_GOTOFF             166
+#define R_SH_GOTPC              167
+
+/* FDPIC relocs */
+#define R_SH_GOT20              70
+#define R_SH_GOTOFF20           71
+#define R_SH_GOTFUNCDESC        72
+#define R_SH_GOTFUNCDESC20      73
+#define R_SH_GOTOFFFUNCDESC     74
+#define R_SH_GOTOFFFUNCDESC20   75
+#define R_SH_FUNCDESC           76
+#define R_SH_FUNCDESC_VALUE     77
+
+#if 0 /* XXX - later .. */
+#define R_SH_GOT20              198
+#define R_SH_GOTOFF20           199
+#define R_SH_GOTFUNCDESC        200
+#define R_SH_GOTFUNCDESC20      201
+#define R_SH_GOTOFFFUNCDESC     202
+#define R_SH_GOTOFFFUNCDESC20   203
+#define R_SH_FUNCDESC           204
+#define R_SH_FUNCDESC_VALUE     205
+#endif
+
+/* SHmedia relocs */
+#define R_SH_IMM_LOW16          246
+#define R_SH_IMM_LOW16_PCREL    247
+#define R_SH_IMM_MEDLOW16       248
+#define R_SH_IMM_MEDLOW16_PCREL 249
+/* Keep this the last entry.  */
+#define R_SH_NUM                256
+
+/*
+ * ELF register definitions..
+ */
+
+typedef unsigned long elf_greg_t;
+
+#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef struct user_fpu_struct elf_fpregset_t;
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS       ELFCLASS32
+#ifdef __LITTLE_ENDIAN__
+#define ELF_DATA        ELFDATA2LSB
+#else
+#define ELF_DATA        ELFDATA2MSB
+#endif
+#define ELF_ARCH        EM_SH
+
+#ifdef __KERNEL__
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x)               ((x)->e_machine == EM_SH)
+#define elf_check_fdpic(x)              ((x)->e_flags & EF_SH_FDPIC)
+#define elf_check_const_displacement(x) ((x)->e_flags & EF_SH_PIC)
+
+#define USE_ELF_CORE_DUMP
+#define ELF_FDPIC_CORE_EFLAGS   EF_SH_FDPIC
+#define ELF_EXEC_PAGESIZE       PAGE_SIZE
+
+/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+   use of this is to invoke "./ld.so someprog" to test out a new version of
+   the loader.  We need to make sure that it is out of the way of the program
+   that it will "exec", and that there is sufficient room for the brk.  */
+
+#define ELF_ET_DYN_BASE         (2 * TASK_SIZE / 3)
+
+#define ELF_CORE_COPY_REGS(_dest,_regs)                         \
+        memcpy((char *) &_dest, (char *) _regs,                 \
+               sizeof(struct pt_regs));
+
+/* This yields a mask that user programs can use to figure out what
+   instruction set this CPU supports.  This could be done in user space,
+   but it's not easy, and we've already done it here.  */
+
+#define ELF_HWCAP       (boot_cpu_data.flags)
+
+/* This yields a string that ld.so will use to load implementation
+   specific libraries for optimization.  This is more specific in
+   intent than poking at uname or /proc/cpuinfo.
+
+   For the moment, we have only optimizations for the Intel generations,
+   but that could change... */
+
+#define ELF_PLATFORM    (utsname()->machine)
+
+#ifdef __SH5__
+#define ELF_PLAT_INIT(_r, load_addr) \
+  do { _r->regs[0]=0; _r->regs[1]=0; _r->regs[2]=0; _r->regs[3]=0; \
+       _r->regs[4]=0; _r->regs[5]=0; _r->regs[6]=0; _r->regs[7]=0; \
+       _r->regs[8]=0; _r->regs[9]=0; _r->regs[10]=0; _r->regs[11]=0; \
+       _r->regs[12]=0; _r->regs[13]=0; _r->regs[14]=0; _r->regs[15]=0; \
+       _r->regs[16]=0; _r->regs[17]=0; _r->regs[18]=0; _r->regs[19]=0; \
+       _r->regs[20]=0; _r->regs[21]=0; _r->regs[22]=0; _r->regs[23]=0; \
+       _r->regs[24]=0; _r->regs[25]=0; _r->regs[26]=0; _r->regs[27]=0; \
+       _r->regs[28]=0; _r->regs[29]=0; _r->regs[30]=0; _r->regs[31]=0; \
+       _r->regs[32]=0; _r->regs[33]=0; _r->regs[34]=0; _r->regs[35]=0; \
+       _r->regs[36]=0; _r->regs[37]=0; _r->regs[38]=0; _r->regs[39]=0; \
+       _r->regs[40]=0; _r->regs[41]=0; _r->regs[42]=0; _r->regs[43]=0; \
+       _r->regs[44]=0; _r->regs[45]=0; _r->regs[46]=0; _r->regs[47]=0; \
+       _r->regs[48]=0; _r->regs[49]=0; _r->regs[50]=0; _r->regs[51]=0; \
+       _r->regs[52]=0; _r->regs[53]=0; _r->regs[54]=0; _r->regs[55]=0; \
+       _r->regs[56]=0; _r->regs[57]=0; _r->regs[58]=0; _r->regs[59]=0; \
+       _r->regs[60]=0; _r->regs[61]=0; _r->regs[62]=0; \
+       _r->tregs[0]=0; _r->tregs[1]=0; _r->tregs[2]=0; _r->tregs[3]=0; \
+       _r->tregs[4]=0; _r->tregs[5]=0; _r->tregs[6]=0; _r->tregs[7]=0; \
+       _r->sr = SR_FD | SR_MMU; } while (0)
+#else
+#define ELF_PLAT_INIT(_r, load_addr) \
+  do { _r->regs[0]=0; _r->regs[1]=0; _r->regs[2]=0; _r->regs[3]=0; \
+       _r->regs[4]=0; _r->regs[5]=0; _r->regs[6]=0; _r->regs[7]=0; \
+       _r->regs[8]=0; _r->regs[9]=0; _r->regs[10]=0; _r->regs[11]=0; \
+       _r->regs[12]=0; _r->regs[13]=0; _r->regs[14]=0; \
+       _r->sr = SR_FD; } while (0)
+
+#define ELF_FDPIC_PLAT_INIT(_r, _exec_map_addr, _interp_map_addr,       \
+                            _dynamic_addr)                              \
+do {                                                                    \
+        _r->regs[0]     = 0;                                            \
+        _r->regs[1]     = 0;                                            \
+        _r->regs[2]     = 0;                                            \
+        _r->regs[3]     = 0;                                            \
+        _r->regs[4]     = 0;                                            \
+        _r->regs[5]     = 0;                                            \
+        _r->regs[6]     = 0;                                            \
+        _r->regs[7]     = 0;                                            \
+        _r->regs[8]     = _exec_map_addr;                               \
+        _r->regs[9]     = _interp_map_addr;                             \
+        _r->regs[10]    = _dynamic_addr;                                \
+        _r->regs[11]    = 0;                                            \
+        _r->regs[12]    = 0;                                            \
+        _r->regs[13]    = 0;                                            \
+        _r->regs[14]    = 0;                                            \
+        _r->sr          = SR_FD;                                        \
+} while (0)
+#endif
+
+#define SET_PERSONALITY(ex, ibcs2) set_personality(PER_LINUX_32BIT)
+struct task_struct;
+extern int dump_task_regs (struct task_struct *, elf_gregset_t *);
+extern int dump_task_fpu (struct task_struct *, elf_fpregset_t *);
+
+#define ELF_CORE_COPY_TASK_REGS(tsk, elf_regs) dump_task_regs(tsk, elf_regs)
+#define ELF_CORE_COPY_FPREGS(tsk, elf_fpregs) dump_task_fpu(tsk, elf_fpregs)
+
+#ifdef CONFIG_VSYSCALL
+/* vDSO has arch_setup_additional_pages */
+#define ARCH_HAS_SETUP_ADDITIONAL_PAGES
+struct linux_binprm;
+extern int arch_setup_additional_pages(struct linux_binprm *bprm,
+                                       int executable_stack);
+
+extern unsigned int vdso_enabled;
+extern void __kernel_vsyscall;
+
+#define VDSO_BASE               ((unsigned long)current->mm->context.vdso)
+#define VDSO_SYM(x)             (VDSO_BASE + (unsigned long)(x))
+
+#define VSYSCALL_AUX_ENT                                        \
+        if (vdso_enabled)                                       \
+                NEW_AUX_ENT(AT_SYSINFO_EHDR, VDSO_BASE);
+#else
+#define VSYSCALL_AUX_ENT
+#endif /* CONFIG_VSYSCALL */
+
+#ifdef CONFIG_SH_FPU
+#define FPU_AUX_ENT     NEW_AUX_ENT(AT_FPUCW, FPSCR_INIT)
+#else
+#define FPU_AUX_ENT
+#endif
+
+extern int l1i_cache_shape, l1d_cache_shape, l2_cache_shape;
+
+/* update AT_VECTOR_SIZE_ARCH if the number of NEW_AUX_ENT entries changes */
+#define ARCH_DLINFO                                             \
+do {                                                            \
+        /* Optional FPU initialization */                       \
+        FPU_AUX_ENT;                                            \
+                                                                \
+        /* Optional vsyscall entry */                           \
+        VSYSCALL_AUX_ENT;                                       \
+                                                                \
+        /* Cache desc */                                        \
+        NEW_AUX_ENT(AT_L1I_CACHESHAPE, l1i_cache_shape);        \
+        NEW_AUX_ENT(AT_L1D_CACHESHAPE, l1d_cache_shape);        \
+        NEW_AUX_ENT(AT_L2_CACHESHAPE, l2_cache_shape);          \
+} while (0)
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_ELF_H */
diff --git a/include/asm-sh/emergency-restart.h b/arch/sh/include/asm/emergency-restart.h
index 108d8c48e42e..108d8c48e42e 100644
--- a/include/asm-sh/emergency-restart.h
+++ b/arch/sh/include/asm/emergency-restart.h
diff --git a/include/asm-sh/entry-macros.S b/arch/sh/include/asm/entry-macros.S
index 2dab0b8d9454..2dab0b8d9454 100644
--- a/include/asm-sh/entry-macros.S
+++ b/arch/sh/include/asm/entry-macros.S
diff --git a/include/asm-sh/errno.h b/arch/sh/include/asm/errno.h
index 51cf6f9cebb8..51cf6f9cebb8 100644
--- a/include/asm-sh/errno.h
+++ b/arch/sh/include/asm/errno.h
diff --git a/include/asm-sh/fb.h b/arch/sh/include/asm/fb.h
index d92e99cd8c8a..d92e99cd8c8a 100644
--- a/include/asm-sh/fb.h
+++ b/arch/sh/include/asm/fb.h
diff --git a/include/asm-sh/fcntl.h b/arch/sh/include/asm/fcntl.h
index 46ab12db5739..46ab12db5739 100644
--- a/include/asm-sh/fcntl.h
+++ b/arch/sh/include/asm/fcntl.h
diff --git a/include/asm-sh/fixmap.h b/arch/sh/include/asm/fixmap.h
index 721fcc4d5e98..721fcc4d5e98 100644
--- a/include/asm-sh/fixmap.h
+++ b/arch/sh/include/asm/fixmap.h
diff --git a/include/asm-sh/flat.h b/arch/sh/include/asm/flat.h
index 0cc800299e06..0cc800299e06 100644
--- a/include/asm-sh/flat.h
+++ b/arch/sh/include/asm/flat.h
diff --git a/include/asm-sh/fpu.h b/arch/sh/include/asm/fpu.h
index 91462fea1507..91462fea1507 100644
--- a/include/asm-sh/fpu.h
+++ b/arch/sh/include/asm/fpu.h
diff --git a/arch/sh/include/asm/freq.h b/arch/sh/include/asm/freq.h
new file mode 100644
index 000000000000..4ece90b09b9c
--- /dev/null
+++ b/arch/sh/include/asm/freq.h
@@ -0,0 +1,18 @@
+/*
+ * include/asm-sh/freq.h
+ *
+ * Copyright (C) 2002, 2003 Paul Mundt
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef __ASM_SH_FREQ_H
+#define __ASM_SH_FREQ_H
+#ifdef __KERNEL__
+
+#include <cpu/freq.h>
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_FREQ_H */
diff --git a/include/asm-sh/futex-irq.h b/arch/sh/include/asm/futex-irq.h
index a9f16a7f9aea..a9f16a7f9aea 100644
--- a/include/asm-sh/futex-irq.h
+++ b/arch/sh/include/asm/futex-irq.h
diff --git a/include/asm-sh/futex.h b/arch/sh/include/asm/futex.h
index 68256ec5fa35..68256ec5fa35 100644
--- a/include/asm-sh/futex.h
+++ b/arch/sh/include/asm/futex.h
diff --git a/arch/sh/include/asm/gpio.h b/arch/sh/include/asm/gpio.h
new file mode 100644
index 000000000000..cf32bd2df881
--- /dev/null
+++ b/arch/sh/include/asm/gpio.h
@@ -0,0 +1,19 @@
+/*
+ *  include/asm-sh/gpio.h
+ *
+ *  Copyright (C) 2007 Markus Brunner, Mark Jonas
+ *
+ *  Addresses for the Pin Function Controller
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_SH_GPIO_H
+#define __ASM_SH_GPIO_H
+
+#if defined(CONFIG_CPU_SH3)
+#include <cpu/gpio.h>
+#endif
+
+#endif /* __ASM_SH_GPIO_H */
diff --git a/include/asm-sh/hardirq.h b/arch/sh/include/asm/hardirq.h
index 715ee237fc77..715ee237fc77 100644
--- a/include/asm-sh/hardirq.h
+++ b/arch/sh/include/asm/hardirq.h
diff --git a/include/asm-sh/hd64461.h b/arch/sh/include/asm/hd64461.h
index 8c1353baf00f..8c1353baf00f 100644
--- a/include/asm-sh/hd64461.h
+++ b/arch/sh/include/asm/hd64461.h
diff --git a/include/asm-sh/hd64465/gpio.h b/arch/sh/include/asm/hd64465/gpio.h
index a3cdca2713dd..a3cdca2713dd 100644
--- a/include/asm-sh/hd64465/gpio.h
+++ b/arch/sh/include/asm/hd64465/gpio.h
diff --git a/include/asm-sh/hd64465/hd64465.h b/arch/sh/include/asm/hd64465/hd64465.h
index cfd0e803d2a2..cfd0e803d2a2 100644
--- a/include/asm-sh/hd64465/hd64465.h
+++ b/arch/sh/include/asm/hd64465/hd64465.h
diff --git a/include/asm-sh/hd64465/io.h b/arch/sh/include/asm/hd64465/io.h
index 139f1472e5bb..139f1472e5bb 100644
--- a/include/asm-sh/hd64465/io.h
+++ b/arch/sh/include/asm/hd64465/io.h
diff --git a/include/asm-sh/heartbeat.h b/arch/sh/include/asm/heartbeat.h
index 724a43ed245e..724a43ed245e 100644
--- a/include/asm-sh/heartbeat.h
+++ b/arch/sh/include/asm/heartbeat.h
diff --git a/include/asm-sh/hp6xx.h b/arch/sh/include/asm/hp6xx.h
index 0d4165a32dcd..0d4165a32dcd 100644
--- a/include/asm-sh/hp6xx.h
+++ b/arch/sh/include/asm/hp6xx.h
diff --git a/include/asm-sh/hugetlb.h b/arch/sh/include/asm/hugetlb.h
index 967068fb79ac..967068fb79ac 100644
--- a/include/asm-sh/hugetlb.h
+++ b/arch/sh/include/asm/hugetlb.h
diff --git a/arch/sh/include/asm/hw_irq.h b/arch/sh/include/asm/hw_irq.h
new file mode 100644
index 000000000000..d557b00111bf
--- /dev/null
+++ b/arch/sh/include/asm/hw_irq.h
@@ -0,0 +1,123 @@
+#ifndef __ASM_SH_HW_IRQ_H
+#define __ASM_SH_HW_IRQ_H
+
+#include <linux/init.h>
+#include <asm/atomic.h>
+
+extern atomic_t irq_err_count;
+
+struct ipr_data {
+        unsigned char irq;
+        unsigned char ipr_idx;          /* Index for the IPR registered */
+        unsigned char shift;            /* Number of bits to shift the data */
+        unsigned char priority;         /* The priority */
+};
+
+struct ipr_desc {
+        unsigned long *ipr_offsets;
+        unsigned int nr_offsets;
+        struct ipr_data *ipr_data;
+        unsigned int nr_irqs;
+        struct irq_chip chip;
+};
+
+void register_ipr_controller(struct ipr_desc *);
+
+typedef unsigned char intc_enum;
+
+struct intc_vect {
+        intc_enum enum_id;
+        unsigned short vect;
+};
+
+#define INTC_VECT(enum_id, vect) { enum_id, vect }
+#define INTC_IRQ(enum_id, irq) INTC_VECT(enum_id, irq2evt(irq))
+
+struct intc_group {
+        intc_enum enum_id;
+        intc_enum enum_ids[32];
+};
+
+#define INTC_GROUP(enum_id, ids...) { enum_id, { ids } }
+
+struct intc_mask_reg {
+        unsigned long set_reg, clr_reg, reg_width;
+        intc_enum enum_ids[32];
+#ifdef CONFIG_SMP
+        unsigned long smp;
+#endif
+};
+
+struct intc_prio_reg {
+        unsigned long set_reg, clr_reg, reg_width, field_width;
+        intc_enum enum_ids[16];
+#ifdef CONFIG_SMP
+        unsigned long smp;
+#endif
+};
+
+struct intc_sense_reg {
+        unsigned long reg, reg_width, field_width;
+        intc_enum enum_ids[16];
+};
+
+#ifdef CONFIG_SMP
+#define INTC_SMP(stride, nr) .smp = (stride) | ((nr) << 8)
+#else
+#define INTC_SMP(stride, nr)
+#endif
+
+struct intc_desc {
+        struct intc_vect *vectors;
+        unsigned int nr_vectors;
+        struct intc_group *groups;
+        unsigned int nr_groups;
+        struct intc_mask_reg *mask_regs;
+        unsigned int nr_mask_regs;
+        struct intc_prio_reg *prio_regs;
+        unsigned int nr_prio_regs;
+        struct intc_sense_reg *sense_regs;
+        unsigned int nr_sense_regs;
+        char *name;
+#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A)
+        struct intc_mask_reg *ack_regs;
+        unsigned int nr_ack_regs;
+#endif
+};
+
+#define _INTC_ARRAY(a) a, sizeof(a)/sizeof(*a)
+#define DECLARE_INTC_DESC(symbol, chipname, vectors, groups,            \
+        mask_regs, prio_regs, sense_regs)                               \
+struct intc_desc symbol __initdata = {                                  \
+        _INTC_ARRAY(vectors), _INTC_ARRAY(groups),                      \
+        _INTC_ARRAY(mask_regs), _INTC_ARRAY(prio_regs),                 \
+        _INTC_ARRAY(sense_regs),                                        \
+        chipname,                                                       \
+}
+
+#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A)
+#define DECLARE_INTC_DESC_ACK(symbol, chipname, vectors, groups,        \
+        mask_regs, prio_regs, sense_regs, ack_regs)                     \
+struct intc_desc symbol __initdata = {                                  \
+        _INTC_ARRAY(vectors), _INTC_ARRAY(groups),                      \
+        _INTC_ARRAY(mask_regs), _INTC_ARRAY(prio_regs),                 \
+        _INTC_ARRAY(sense_regs),                                        \
+        chipname,                                                       \
+        _INTC_ARRAY(ack_regs),                                          \
+}
+#endif
+
+void __init register_intc_controller(struct intc_desc *desc);
+int intc_set_priority(unsigned int irq, unsigned int prio);
+
+void __init plat_irq_setup(void);
+#ifdef CONFIG_CPU_SH3
+void __init plat_irq_setup_sh3(void);
+#endif
+
+enum { IRQ_MODE_IRQ, IRQ_MODE_IRQ7654, IRQ_MODE_IRQ3210,
+       IRQ_MODE_IRL7654_MASK, IRQ_MODE_IRL3210_MASK,
+       IRQ_MODE_IRL7654, IRQ_MODE_IRL3210 };
+void __init plat_irq_setup_pins(int mode);
+
+#endif /* __ASM_SH_HW_IRQ_H */
diff --git a/include/asm-sh/i2c-sh7760.h b/arch/sh/include/asm/i2c-sh7760.h
index 24182116711f..24182116711f 100644
--- a/include/asm-sh/i2c-sh7760.h
+++ b/arch/sh/include/asm/i2c-sh7760.h
diff --git a/include/asm-sh/ilsel.h b/arch/sh/include/asm/ilsel.h
index e3d304b280f6..e3d304b280f6 100644
--- a/include/asm-sh/ilsel.h
+++ b/arch/sh/include/asm/ilsel.h
diff --git a/include/asm-sh/io.h b/arch/sh/include/asm/io.h
index a4fbf0c84fb1..a4fbf0c84fb1 100644
--- a/include/asm-sh/io.h
+++ b/arch/sh/include/asm/io.h
diff --git a/include/asm-sh/io_generic.h b/arch/sh/include/asm/io_generic.h
index 92fc6070d7b3..92fc6070d7b3 100644
--- a/include/asm-sh/io_generic.h
+++ b/arch/sh/include/asm/io_generic.h
diff --git a/include/asm-sh/io_trapped.h b/arch/sh/include/asm/io_trapped.h
index f1251d4f0ba9..f1251d4f0ba9 100644
--- a/include/asm-sh/io_trapped.h
+++ b/arch/sh/include/asm/io_trapped.h
diff --git a/include/asm-sh/ioctl.h b/arch/sh/include/asm/ioctl.h
index b279fe06dfe5..b279fe06dfe5 100644
--- a/include/asm-sh/ioctl.h
+++ b/arch/sh/include/asm/ioctl.h
diff --git a/include/asm-sh/ioctls.h b/arch/sh/include/asm/ioctls.h
index c212c371a4a5..c212c371a4a5 100644
--- a/include/asm-sh/ioctls.h
+++ b/arch/sh/include/asm/ioctls.h
diff --git a/include/asm-sh/ipcbuf.h b/arch/sh/include/asm/ipcbuf.h
index 5ffc9972a7ea..5ffc9972a7ea 100644
--- a/include/asm-sh/ipcbuf.h
+++ b/arch/sh/include/asm/ipcbuf.h
diff --git a/arch/sh/include/asm/irq.h b/arch/sh/include/asm/irq.h
new file mode 100644
index 000000000000..6195a531c1b0
--- /dev/null
+++ b/arch/sh/include/asm/irq.h
@@ -0,0 +1,57 @@
+#ifndef __ASM_SH_IRQ_H
+#define __ASM_SH_IRQ_H
+
+#include <asm/machvec.h>
+
+/*
+ * A sane default based on a reasonable vector table size, platforms are
+ * advised to cap this at the hard limit that they're interested in
+ * through the machvec.
+ */
+#define NR_IRQS 256
+
+/*
+ * Convert back and forth between INTEVT and IRQ values.
+ */
+#ifdef CONFIG_CPU_HAS_INTEVT
+#define evt2irq(evt)            (((evt) >> 5) - 16)
+#define irq2evt(irq)            (((irq) + 16) << 5)
+#else
+#define evt2irq(evt)            (evt)
+#define irq2evt(irq)            (irq)
+#endif
+
+/*
+ * Simple Mask Register Support
+ */
+extern void make_maskreg_irq(unsigned int irq);
+extern unsigned short *irq_mask_register;
+
+/*
+ * PINT IRQs
+ */
+void init_IRQ_pint(void);
+void make_imask_irq(unsigned int irq);
+
+static inline int generic_irq_demux(int irq)
+{
+        return irq;
+}
+
+#define irq_canonicalize(irq)   (irq)
+#define irq_demux(irq)          sh_mv.mv_irq_demux(irq)
+
+#ifdef CONFIG_IRQSTACKS
+extern void irq_ctx_init(int cpu);
+extern void irq_ctx_exit(int cpu);
+# define __ARCH_HAS_DO_SOFTIRQ
+#else
+# define irq_ctx_init(cpu) do { } while (0)
+# define irq_ctx_exit(cpu) do { } while (0)
+#endif
+
+#ifdef CONFIG_CPU_SH5
+#include <cpu/irq.h>
+#endif
+
+#endif /* __ASM_SH_IRQ_H */
diff --git a/include/asm-sh/irq_regs.h b/arch/sh/include/asm/irq_regs.h
index 3dd9c0b70270..3dd9c0b70270 100644
--- a/include/asm-sh/irq_regs.h
+++ b/arch/sh/include/asm/irq_regs.h
diff --git a/include/asm-sh/irqflags.h b/arch/sh/include/asm/irqflags.h
index 46e71da5be6b..46e71da5be6b 100644
--- a/include/asm-sh/irqflags.h
+++ b/arch/sh/include/asm/irqflags.h
diff --git a/include/asm-sh/irqflags_32.h b/arch/sh/include/asm/irqflags_32.h
index 60218f541340..60218f541340 100644
--- a/include/asm-sh/irqflags_32.h
+++ b/arch/sh/include/asm/irqflags_32.h
diff --git a/arch/sh/include/asm/irqflags_64.h b/arch/sh/include/asm/irqflags_64.h
new file mode 100644
index 000000000000..88f65222c1d4
--- /dev/null
+++ b/arch/sh/include/asm/irqflags_64.h
@@ -0,0 +1,85 @@
+#ifndef __ASM_SH_IRQFLAGS_64_H
+#define __ASM_SH_IRQFLAGS_64_H
+
+#include <cpu/registers.h>
+
+#define SR_MASK_LL      0x00000000000000f0LL
+#define SR_BL_LL        0x0000000010000000LL
+
+static inline void raw_local_irq_enable(void)
+{
+        unsigned long long __dummy0, __dummy1 = ~SR_MASK_LL;
+
+        __asm__ __volatile__("getcon    " __SR ", %0\n\t"
+                             "and       %0, %1, %0\n\t"
+                             "putcon    %0, " __SR "\n\t"
+                             : "=&r" (__dummy0)
+                             : "r" (__dummy1));
+}
+
+static inline void raw_local_irq_disable(void)
+{
+        unsigned long long __dummy0, __dummy1 = SR_MASK_LL;
+
+        __asm__ __volatile__("getcon    " __SR ", %0\n\t"
+                             "or        %0, %1, %0\n\t"
+                             "putcon    %0, " __SR "\n\t"
+                             : "=&r" (__dummy0)
+                             : "r" (__dummy1));
+}
+
+static inline void set_bl_bit(void)
+{
+        unsigned long long __dummy0, __dummy1 = SR_BL_LL;
+
+        __asm__ __volatile__("getcon    " __SR ", %0\n\t"
+                             "or        %0, %1, %0\n\t"
+                             "putcon    %0, " __SR "\n\t"
+                             : "=&r" (__dummy0)
+                             : "r" (__dummy1));
+
+}
+
+static inline void clear_bl_bit(void)
+{
+        unsigned long long __dummy0, __dummy1 = ~SR_BL_LL;
+
+        __asm__ __volatile__("getcon    " __SR ", %0\n\t"
+                             "and       %0, %1, %0\n\t"
+                             "putcon    %0, " __SR "\n\t"
+                             : "=&r" (__dummy0)
+                             : "r" (__dummy1));
+}
+
+static inline unsigned long __raw_local_save_flags(void)
+{
+        unsigned long long __dummy = SR_MASK_LL;
+        unsigned long flags;
+
+        __asm__ __volatile__ (
+                "getcon " __SR ", %0\n\t"
+                "and    %0, %1, %0"
+                : "=&r" (flags)
+                : "r" (__dummy));
+
+        return flags;
+}
+
+static inline unsigned long __raw_local_irq_save(void)
+{
+        unsigned long long __dummy0, __dummy1 = SR_MASK_LL;
+        unsigned long flags;
+
+        __asm__ __volatile__ (
+                "getcon " __SR ", %1\n\t"
+                "or     %1, r63, %0\n\t"
+                "or     %1, %2, %1\n\t"
+                "putcon %1, " __SR "\n\t"
+                "and    %0, %2, %0"
+                : "=&r" (flags), "=&r" (__dummy0)
+                : "r" (__dummy1));
+
+        return flags;
+}
+
+#endif /* __ASM_SH_IRQFLAGS_64_H */
diff --git a/include/asm-sh/kdebug.h b/arch/sh/include/asm/kdebug.h
index 49cd69051a88..49cd69051a88 100644
--- a/include/asm-sh/kdebug.h
+++ b/arch/sh/include/asm/kdebug.h
diff --git a/include/asm-sh/kexec.h b/arch/sh/include/asm/kexec.h
index 00f4260ef09b..00f4260ef09b 100644
--- a/include/asm-sh/kexec.h
+++ b/arch/sh/include/asm/kexec.h
diff --git a/include/asm-sh/kgdb.h b/arch/sh/include/asm/kgdb.h
index 24e42078f36f..24e42078f36f 100644
--- a/include/asm-sh/kgdb.h
+++ b/arch/sh/include/asm/kgdb.h
diff --git a/include/asm-sh/kmap_types.h b/arch/sh/include/asm/kmap_types.h
index 84d565c696be..84d565c696be 100644
--- a/include/asm-sh/kmap_types.h
+++ b/arch/sh/include/asm/kmap_types.h
diff --git a/include/asm-sh/lboxre2.h b/arch/sh/include/asm/lboxre2.h
index e6d160504923..e6d160504923 100644
--- a/include/asm-sh/lboxre2.h
+++ b/arch/sh/include/asm/lboxre2.h
diff --git a/include/asm-sh/linkage.h b/arch/sh/include/asm/linkage.h
index 3565a4f4009f..3565a4f4009f 100644
--- a/include/asm-sh/linkage.h
+++ b/arch/sh/include/asm/linkage.h
diff --git a/include/asm-sh/local.h b/arch/sh/include/asm/local.h
index 9ed9b9cb459a..9ed9b9cb459a 100644
--- a/include/asm-sh/local.h
+++ b/arch/sh/include/asm/local.h
diff --git a/include/asm-sh/machvec.h b/arch/sh/include/asm/machvec.h
index b2e4124070ae..b2e4124070ae 100644
--- a/include/asm-sh/machvec.h
+++ b/arch/sh/include/asm/machvec.h
diff --git a/include/asm-sh/magicpanelr2.h b/arch/sh/include/asm/magicpanelr2.h
index c644a77ee357..c644a77ee357 100644
--- a/include/asm-sh/magicpanelr2.h
+++ b/arch/sh/include/asm/magicpanelr2.h
diff --git a/include/asm-sh/mc146818rtc.h b/arch/sh/include/asm/mc146818rtc.h
index 0aee96a97330..0aee96a97330 100644
--- a/include/asm-sh/mc146818rtc.h
+++ b/arch/sh/include/asm/mc146818rtc.h
diff --git a/include/asm-sh/microdev.h b/arch/sh/include/asm/microdev.h
index 1aed15856e11..1aed15856e11 100644
--- a/include/asm-sh/microdev.h
+++ b/arch/sh/include/asm/microdev.h
diff --git a/arch/sh/include/asm/migor.h b/arch/sh/include/asm/migor.h
new file mode 100644
index 000000000000..10016e0f4a4e
--- /dev/null
+++ b/arch/sh/include/asm/migor.h
@@ -0,0 +1,65 @@
+#ifndef __ASM_SH_MIGOR_H
+#define __ASM_SH_MIGOR_H
+
+/*
+ * linux/include/asm-sh/migor.h
+ *
+ * Copyright (C) 2008 Renesas Solutions
+ *
+ * Portions Copyright (C) 2007 Nobuhiro Iwamatsu
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#include <asm/addrspace.h>
+
+/* GPIO */
+#define PORT_PACR 0xa4050100
+#define PORT_PDCR 0xa4050106
+#define PORT_PECR 0xa4050108
+#define PORT_PHCR 0xa405010e
+#define PORT_PJCR 0xa4050110
+#define PORT_PKCR 0xa4050112
+#define PORT_PLCR 0xa4050114
+#define PORT_PMCR 0xa4050116
+#define PORT_PRCR 0xa405011c
+#define PORT_PTCR 0xa4050140
+#define PORT_PUCR 0xa4050142
+#define PORT_PVCR 0xa4050144
+#define PORT_PWCR 0xa4050146
+#define PORT_PXCR 0xa4050148
+#define PORT_PYCR 0xa405014a
+#define PORT_PZCR 0xa405014c
+#define PORT_PADR 0xa4050120
+#define PORT_PHDR 0xa405012e
+#define PORT_PTDR 0xa4050160
+#define PORT_PWDR 0xa4050166
+
+#define PORT_HIZCRA 0xa4050158
+#define PORT_HIZCRC 0xa405015c
+
+#define PORT_MSELCRB 0xa4050182
+
+#define MSTPCR1 0xa4150034
+#define MSTPCR2 0xa4150038
+
+#define PORT_PSELA 0xa405014e
+#define PORT_PSELB 0xa4050150
+#define PORT_PSELC 0xa4050152
+#define PORT_PSELD 0xa4050154
+#define PORT_PSELE 0xa4050156
+
+#define PORT_HIZCRA 0xa4050158
+#define PORT_HIZCRB 0xa405015a
+#define PORT_HIZCRC 0xa405015c
+
+#define BSC_CS6ABCR 0xfec1001c
+
+#include <asm/sh_mobile_lcdc.h>
+
+int migor_lcd_qvga_setup(void *board_data, void *sys_ops_handle,
+                         struct sh_mobile_lcdc_sys_bus_ops *sys_ops);
+
+#endif /* __ASM_SH_MIGOR_H */
diff --git a/include/asm-sh/mman.h b/arch/sh/include/asm/mman.h
index 156eb0225cf6..156eb0225cf6 100644
--- a/include/asm-sh/mman.h
+++ b/arch/sh/include/asm/mman.h
diff --git a/arch/sh/include/asm/mmu.h b/arch/sh/include/asm/mmu.h
new file mode 100644
index 000000000000..fdcb93bc6d11
--- /dev/null
+++ b/arch/sh/include/asm/mmu.h
@@ -0,0 +1,76 @@
+#ifndef __MMU_H
+#define __MMU_H
+
+/* Default "unsigned long" context */
+typedef unsigned long mm_context_id_t[NR_CPUS];
+
+typedef struct {
+#ifdef CONFIG_MMU
+        mm_context_id_t         id;
+        void                    *vdso;
+#else
+        struct vm_list_struct   *vmlist;
+        unsigned long           end_brk;
+#endif
+#ifdef CONFIG_BINFMT_ELF_FDPIC
+        unsigned long           exec_fdpic_loadmap;
+        unsigned long           interp_fdpic_loadmap;
+#endif
+} mm_context_t;
+
+/*
+ * Privileged Space Mapping Buffer (PMB) definitions
+ */
+#define PMB_PASCR               0xff000070
+#define PMB_IRMCR               0xff000078
+
+#define PMB_ADDR                0xf6100000
+#define PMB_DATA                0xf7100000
+#define PMB_ENTRY_MAX           16
+#define PMB_E_MASK              0x0000000f
+#define PMB_E_SHIFT             8
+
+#define PMB_SZ_16M              0x00000000
+#define PMB_SZ_64M              0x00000010
+#define PMB_SZ_128M             0x00000080
+#define PMB_SZ_512M             0x00000090
+#define PMB_SZ_MASK             PMB_SZ_512M
+#define PMB_C                   0x00000008
+#define PMB_WT                  0x00000001
+#define PMB_UB                  0x00000200
+#define PMB_V                   0x00000100
+
+#define PMB_NO_ENTRY            (-1)
+
+struct pmb_entry;
+
+struct pmb_entry {
+        unsigned long vpn;
+        unsigned long ppn;
+        unsigned long flags;
+
+        /*
+         * 0 .. NR_PMB_ENTRIES for specific entry selection, or
+         * PMB_NO_ENTRY to search for a free one
+         */
+        int entry;
+
+        struct pmb_entry *next;
+        /* Adjacent entry link for contiguous multi-entry mappings */
+        struct pmb_entry *link;
+};
+
+/* arch/sh/mm/pmb.c */
+int __set_pmb_entry(unsigned long vpn, unsigned long ppn,
+                    unsigned long flags, int *entry);
+int set_pmb_entry(struct pmb_entry *pmbe);
+void clear_pmb_entry(struct pmb_entry *pmbe);
+struct pmb_entry *pmb_alloc(unsigned long vpn, unsigned long ppn,
+                            unsigned long flags);
+void pmb_free(struct pmb_entry *pmbe);
+long pmb_remap(unsigned long virt, unsigned long phys,
+               unsigned long size, unsigned long flags);
+void pmb_unmap(unsigned long addr);
+
+#endif /* __MMU_H */
+
diff --git a/arch/sh/include/asm/mmu_context.h b/arch/sh/include/asm/mmu_context.h
new file mode 100644
index 000000000000..04c0c9733ad6
--- /dev/null
+++ b/arch/sh/include/asm/mmu_context.h
@@ -0,0 +1,185 @@
+/*
+ * Copyright (C) 1999 Niibe Yutaka
+ * Copyright (C) 2003 - 2007 Paul Mundt
+ *
+ * ASID handling idea taken from MIPS implementation.
+ */
+#ifndef __ASM_SH_MMU_CONTEXT_H
+#define __ASM_SH_MMU_CONTEXT_H
+
+#ifdef __KERNEL__
+#include <cpu/mmu_context.h>
+#include <asm/tlbflush.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm-generic/mm_hooks.h>
+
+/*
+ * The MMU "context" consists of two things:
+ *    (a) TLB cache version (or round, cycle whatever expression you like)
+ *    (b) ASID (Address Space IDentifier)
+ */
+#define MMU_CONTEXT_ASID_MASK           0x000000ff
+#define MMU_CONTEXT_VERSION_MASK        0xffffff00
+#define MMU_CONTEXT_FIRST_VERSION       0x00000100
+#define NO_CONTEXT                      0
+
+/* ASID is 8-bit value, so it can't be 0x100 */
+#define MMU_NO_ASID                     0x100
+
+#define asid_cache(cpu)         (cpu_data[cpu].asid_cache)
+
+#ifdef CONFIG_MMU
+#define cpu_context(cpu, mm)    ((mm)->context.id[cpu])
+
+#define cpu_asid(cpu, mm)       \
+        (cpu_context((cpu), (mm)) & MMU_CONTEXT_ASID_MASK)
+
+/*
+ * Virtual Page Number mask
+ */
+#define MMU_VPN_MASK    0xfffff000
+
+#if defined(CONFIG_SUPERH32)
+#include "mmu_context_32.h"
+#else
+#include "mmu_context_64.h"
+#endif
+
+/*
+ * Get MMU context if needed.
+ */
+static inline void get_mmu_context(struct mm_struct *mm, unsigned int cpu)
+{
+        unsigned long asid = asid_cache(cpu);
+
+        /* Check if we have old version of context. */
+        if (((cpu_context(cpu, mm) ^ asid) & MMU_CONTEXT_VERSION_MASK) == 0)
+                /* It's up to date, do nothing */
+                return;
+
+        /* It's old, we need to get new context with new version. */
+        if (!(++asid & MMU_CONTEXT_ASID_MASK)) {
+                /*
+                 * We exhaust ASID of this version.
+                 * Flush all TLB and start new cycle.
+                 */
+                flush_tlb_all();
+
+#ifdef CONFIG_SUPERH64
+                /*
+                 * The SH-5 cache uses the ASIDs, requiring both the I and D
+                 * cache to be flushed when the ASID is exhausted. Weak.
+                 */
+                flush_cache_all();
+#endif
+
+                /*
+                 * Fix version; Note that we avoid version #0
+                 * to distingush NO_CONTEXT.
+                 */
+                if (!asid)
+                        asid = MMU_CONTEXT_FIRST_VERSION;
+        }
+
+        cpu_context(cpu, mm) = asid_cache(cpu) = asid;
+}
+
+/*
+ * Initialize the context related info for a new mm_struct
+ * instance.
+ */
+static inline int init_new_context(struct task_struct *tsk,
+                                   struct mm_struct *mm)
+{
+        int i;
+
+        for (i = 0; i < num_online_cpus(); i++)
+                cpu_context(i, mm) = NO_CONTEXT;
+
+        return 0;
+}
+
+/*
+ * After we have set current->mm to a new value, this activates
+ * the context for the new mm so we see the new mappings.
+ */
+static inline void activate_context(struct mm_struct *mm, unsigned int cpu)
+{
+        get_mmu_context(mm, cpu);
+        set_asid(cpu_asid(cpu, mm));
+}
+
+static inline void switch_mm(struct mm_struct *prev,
+                             struct mm_struct *next,
+                             struct task_struct *tsk)
+{
+        unsigned int cpu = smp_processor_id();
+
+        if (likely(prev != next)) {
+                cpu_set(cpu, next->cpu_vm_mask);
+                set_TTB(next->pgd);
+                activate_context(next, cpu);
+        } else
+                if (!cpu_test_and_set(cpu, next->cpu_vm_mask))
+                        activate_context(next, cpu);
+}
+#else
+#define get_mmu_context(mm)             do { } while (0)
+#define init_new_context(tsk,mm)        (0)
+#define destroy_context(mm)             do { } while (0)
+#define set_asid(asid)                  do { } while (0)
+#define get_asid()                      (0)
+#define cpu_asid(cpu, mm)               ({ (void)cpu; 0; })
+#define switch_and_save_asid(asid)      (0)
+#define set_TTB(pgd)                    do { } while (0)
+#define get_TTB()                       (0)
+#define activate_context(mm,cpu)        do { } while (0)
+#define switch_mm(prev,next,tsk)        do { } while (0)
+#endif /* CONFIG_MMU */
+
+#define activate_mm(prev, next)         switch_mm((prev),(next),NULL)
+#define deactivate_mm(tsk,mm)           do { } while (0)
+#define enter_lazy_tlb(mm,tsk)          do { } while (0)
+
+#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4)
+/*
+ * If this processor has an MMU, we need methods to turn it off/on ..
+ * paging_init() will also have to be updated for the processor in
+ * question.
+ */
+static inline void enable_mmu(void)
+{
+        unsigned int cpu = smp_processor_id();
+
+        /* Enable MMU */
+        ctrl_outl(MMU_CONTROL_INIT, MMUCR);
+        ctrl_barrier();
+
+        if (asid_cache(cpu) == NO_CONTEXT)
+                asid_cache(cpu) = MMU_CONTEXT_FIRST_VERSION;
+
+        set_asid(asid_cache(cpu) & MMU_CONTEXT_ASID_MASK);
+}
+
+static inline void disable_mmu(void)
+{
+        unsigned long cr;
+
+        cr = ctrl_inl(MMUCR);
+        cr &= ~MMU_CONTROL_INIT;
+        ctrl_outl(cr, MMUCR);
+
+        ctrl_barrier();
+}
+#else
+/*
+ * MMU control handlers for processors lacking memory
+ * management hardware.
+ */
+#define enable_mmu()    do { } while (0)
+#define disable_mmu()   do { } while (0)
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_MMU_CONTEXT_H */
diff --git a/include/asm-sh/mmu_context_32.h b/arch/sh/include/asm/mmu_context_32.h
index f4f9aebd68b7..f4f9aebd68b7 100644
--- a/include/asm-sh/mmu_context_32.h
+++ b/arch/sh/include/asm/mmu_context_32.h
diff --git a/arch/sh/include/asm/mmu_context_64.h b/arch/sh/include/asm/mmu_context_64.h
new file mode 100644
index 000000000000..de121025d87f
--- /dev/null
+++ b/arch/sh/include/asm/mmu_context_64.h
@@ -0,0 +1,78 @@
+#ifndef __ASM_SH_MMU_CONTEXT_64_H
+#define __ASM_SH_MMU_CONTEXT_64_H
+
+/*
+ * sh64-specific mmu_context interface.
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2003 - 2007  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <cpu/registers.h>
+#include <asm/cacheflush.h>
+
+#define SR_ASID_MASK            0xffffffffff00ffffULL
+#define SR_ASID_SHIFT           16
+
+/*
+ * Destroy context related info for an mm_struct that is about
+ * to be put to rest.
+ */
+static inline void destroy_context(struct mm_struct *mm)
+{
+        /* Well, at least free TLB entries */
+        flush_tlb_mm(mm);
+}
+
+static inline unsigned long get_asid(void)
+{
+        unsigned long long sr;
+
+        asm volatile ("getcon   " __SR ", %0\n\t"
+                      : "=r" (sr));
+
+        sr = (sr >> SR_ASID_SHIFT) & MMU_CONTEXT_ASID_MASK;
+        return (unsigned long) sr;
+}
+
+/* Set ASID into SR */
+static inline void set_asid(unsigned long asid)
+{
+        unsigned long long sr, pc;
+
+        asm volatile ("getcon   " __SR ", %0" : "=r" (sr));
+
+        sr = (sr & SR_ASID_MASK) | (asid << SR_ASID_SHIFT);
+
+        /*
+         * It is possible that this function may be inlined and so to avoid
+         * the assembler reporting duplicate symbols we make use of the
+         * gas trick of generating symbols using numerics and forward
+         * reference.
+         */
+        asm volatile ("movi     1, %1\n\t"
+                      "shlli    %1, 28, %1\n\t"
+                      "or       %0, %1, %1\n\t"
+                      "putcon   %1, " __SR "\n\t"
+                      "putcon   %0, " __SSR "\n\t"
+                      "movi     1f, %1\n\t"
+                      "ori      %1, 1 , %1\n\t"
+                      "putcon   %1, " __SPC "\n\t"
+                      "rte\n"
+                      "1:\n\t"
+                      : "=r" (sr), "=r" (pc) : "0" (sr));
+}
+
+/* arch/sh/kernel/cpu/sh5/entry.S */
+extern unsigned long switch_and_save_asid(unsigned long new_asid);
+
+/* No spare register to twiddle, so use a software cache */
+extern pgd_t *mmu_pdtp_cache;
+
+#define set_TTB(pgd)    (mmu_pdtp_cache = (pgd))
+#define get_TTB()       (mmu_pdtp_cache)
+
+#endif /* __ASM_SH_MMU_CONTEXT_64_H */
diff --git a/include/asm-sh/mmzone.h b/arch/sh/include/asm/mmzone.h
index 2969253c4042..2969253c4042 100644
--- a/include/asm-sh/mmzone.h
+++ b/arch/sh/include/asm/mmzone.h
diff --git a/include/asm-sh/module.h b/arch/sh/include/asm/module.h
index 46eccd331660..46eccd331660 100644
--- a/include/asm-sh/module.h
+++ b/arch/sh/include/asm/module.h
diff --git a/include/asm-sh/msgbuf.h b/arch/sh/include/asm/msgbuf.h
index 517432343fb5..517432343fb5 100644
--- a/include/asm-sh/msgbuf.h
+++ b/arch/sh/include/asm/msgbuf.h
diff --git a/include/asm-sh/mutex.h b/arch/sh/include/asm/mutex.h
index 458c1f7fbc18..458c1f7fbc18 100644
--- a/include/asm-sh/mutex.h
+++ b/arch/sh/include/asm/mutex.h
diff --git a/arch/sh/include/asm/page.h b/arch/sh/include/asm/page.h
new file mode 100644
index 000000000000..77fb8bf02e4e
--- /dev/null
+++ b/arch/sh/include/asm/page.h
@@ -0,0 +1,183 @@
+#ifndef __ASM_SH_PAGE_H
+#define __ASM_SH_PAGE_H
+
+/*
+ * Copyright (C) 1999  Niibe Yutaka
+ */
+
+#include <linux/const.h>
+
+/* PAGE_SHIFT determines the page size */
+#if defined(CONFIG_PAGE_SIZE_4KB)
+# define PAGE_SHIFT     12
+#elif defined(CONFIG_PAGE_SIZE_8KB)
+# define PAGE_SHIFT     13
+#elif defined(CONFIG_PAGE_SIZE_16KB)
+# define PAGE_SHIFT     14
+#elif defined(CONFIG_PAGE_SIZE_64KB)
+# define PAGE_SHIFT     16
+#else
+# error "Bogus kernel page size?"
+#endif
+
+#define PAGE_SIZE       (_AC(1, UL) << PAGE_SHIFT)
+#define PAGE_MASK       (~(PAGE_SIZE-1))
+#define PTE_MASK        PAGE_MASK
+
+#if defined(CONFIG_HUGETLB_PAGE_SIZE_64K)
+#define HPAGE_SHIFT     16
+#elif defined(CONFIG_HUGETLB_PAGE_SIZE_256K)
+#define HPAGE_SHIFT     18
+#elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB)
+#define HPAGE_SHIFT     20
+#elif defined(CONFIG_HUGETLB_PAGE_SIZE_4MB)
+#define HPAGE_SHIFT     22
+#elif defined(CONFIG_HUGETLB_PAGE_SIZE_64MB)
+#define HPAGE_SHIFT     26
+#elif defined(CONFIG_HUGETLB_PAGE_SIZE_512MB)
+#define HPAGE_SHIFT     29
+#endif
+
+#ifdef CONFIG_HUGETLB_PAGE
+#define HPAGE_SIZE              (1UL << HPAGE_SHIFT)
+#define HPAGE_MASK              (~(HPAGE_SIZE-1))
+#define HUGETLB_PAGE_ORDER      (HPAGE_SHIFT-PAGE_SHIFT)
+#endif
+
+#ifndef __ASSEMBLY__
+
+extern unsigned long shm_align_mask;
+extern unsigned long max_low_pfn, min_low_pfn;
+extern unsigned long memory_start, memory_end;
+
+extern void clear_page(void *to);
+extern void copy_page(void *to, void *from);
+
+#if !defined(CONFIG_CACHE_OFF) && defined(CONFIG_MMU) && \
+        (defined(CONFIG_CPU_SH5) || defined(CONFIG_CPU_SH4) || \
+         defined(CONFIG_SH7705_CACHE_32KB))
+struct page;
+struct vm_area_struct;
+extern void clear_user_page(void *to, unsigned long address, struct page *page);
+extern void copy_user_page(void *to, void *from, unsigned long address,
+                           struct page *page);
+#if defined(CONFIG_CPU_SH4)
+extern void copy_user_highpage(struct page *to, struct page *from,
+                               unsigned long vaddr, struct vm_area_struct *vma);
+#define __HAVE_ARCH_COPY_USER_HIGHPAGE
+#endif
+#else
+#define clear_user_page(page, vaddr, pg)        clear_page(page)
+#define copy_user_page(to, from, vaddr, pg)     copy_page(to, from)
+#endif
+
+/*
+ * These are used to make use of C type-checking..
+ */
+#ifdef CONFIG_X2TLB
+typedef struct { unsigned long pte_low, pte_high; } pte_t;
+typedef struct { unsigned long long pgprot; } pgprot_t;
+typedef struct { unsigned long long pgd; } pgd_t;
+#define pte_val(x) \
+        ((x).pte_low | ((unsigned long long)(x).pte_high << 32))
+#define __pte(x) \
+        ({ pte_t __pte = {(x), ((unsigned long long)(x)) >> 32}; __pte; })
+#elif defined(CONFIG_SUPERH32)
+typedef struct { unsigned long pte_low; } pte_t;
+typedef struct { unsigned long pgprot; } pgprot_t;
+typedef struct { unsigned long pgd; } pgd_t;
+#define pte_val(x)      ((x).pte_low)
+#define __pte(x)        ((pte_t) { (x) } )
+#else
+typedef struct { unsigned long long pte_low; } pte_t;
+typedef struct { unsigned long pgprot; } pgprot_t;
+typedef struct { unsigned long pgd; } pgd_t;
+#define pte_val(x)      ((x).pte_low)
+#define __pte(x)        ((pte_t) { (x) } )
+#endif
+
+#define pgd_val(x)      ((x).pgd)
+#define pgprot_val(x)   ((x).pgprot)
+
+#define __pgd(x) ((pgd_t) { (x) } )
+#define __pgprot(x)     ((pgprot_t) { (x) } )
+
+typedef struct page *pgtable_t;
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * __MEMORY_START and SIZE are the physical addresses and size of RAM.
+ */
+#define __MEMORY_START          CONFIG_MEMORY_START
+#define __MEMORY_SIZE           CONFIG_MEMORY_SIZE
+
+/*
+ * PAGE_OFFSET is the virtual address of the start of kernel address
+ * space.
+ */
+#define PAGE_OFFSET             CONFIG_PAGE_OFFSET
+
+/*
+ * Virtual to physical RAM address translation.
+ *
+ * In 29 bit mode, the physical offset of RAM from address 0 is visible in
+ * the kernel virtual address space, and thus we don't have to take
+ * this into account when translating. However in 32 bit mode this offset
+ * is not visible (it is part of the PMB mapping) and so needs to be
+ * added or subtracted as required.
+ */
+#ifdef CONFIG_32BIT
+#define __pa(x) ((unsigned long)(x)-PAGE_OFFSET+__MEMORY_START)
+#define __va(x) ((void *)((unsigned long)(x)+PAGE_OFFSET-__MEMORY_START))
+#else
+#define __pa(x) ((unsigned long)(x)-PAGE_OFFSET)
+#define __va(x) ((void *)((unsigned long)(x)+PAGE_OFFSET))
+#endif
+
+#define pfn_to_kaddr(pfn)       __va((pfn) << PAGE_SHIFT)
+#define page_to_phys(page)      (page_to_pfn(page) << PAGE_SHIFT)
+
+/*
+ * PFN = physical frame number (ie PFN 0 == physical address 0)
+ * PFN_START is the PFN of the first page of RAM. By defining this we
+ * don't have struct page entries for the portion of address space
+ * between physical address 0 and the start of RAM.
+ */
+#define PFN_START               (__MEMORY_START >> PAGE_SHIFT)
+#define ARCH_PFN_OFFSET         (PFN_START)
+#define virt_to_page(kaddr)     pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
+#ifdef CONFIG_FLATMEM
+#define pfn_valid(pfn)          ((pfn) >= min_low_pfn && (pfn) < max_low_pfn)
+#endif
+#define virt_addr_valid(kaddr)  pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
+
+#define VM_DATA_DEFAULT_FLAGS   (VM_READ | VM_WRITE | VM_EXEC | \
+                                 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#include <asm-generic/memory_model.h>
+#include <asm-generic/page.h>
+
+/* vDSO support */
+#ifdef CONFIG_VSYSCALL
+#define __HAVE_ARCH_GATE_AREA
+#endif
+
+/*
+ * Some drivers need to perform DMA into kmalloc'ed buffers
+ * and so we have to increase the kmalloc minalign for this.
+ */
+#define ARCH_KMALLOC_MINALIGN   L1_CACHE_BYTES
+
+#ifdef CONFIG_SUPERH64
+/*
+ * While BYTES_PER_WORD == 4 on the current sh64 ABI, GCC will still
+ * happily generate {ld/st}.q pairs, requiring us to have 8-byte
+ * alignment to avoid traps. The kmalloc alignment is gauranteed by
+ * virtue of L1_CACHE_BYTES, requiring this to only be special cased
+ * for slab caches.
+ */
+#define ARCH_SLAB_MINALIGN      8
+#endif
+
+#endif /* __ASM_SH_PAGE_H */
diff --git a/include/asm-sh/param.h b/arch/sh/include/asm/param.h
index ae245afdfd6a..ae245afdfd6a 100644
--- a/include/asm-sh/param.h
+++ b/arch/sh/include/asm/param.h
diff --git a/include/asm-sh/parport.h b/arch/sh/include/asm/parport.h
index f67ba60a2acd..f67ba60a2acd 100644
--- a/include/asm-sh/parport.h
+++ b/arch/sh/include/asm/parport.h
diff --git a/include/asm-sh/pci.h b/arch/sh/include/asm/pci.h
index df1d383e18a5..df1d383e18a5 100644
--- a/include/asm-sh/pci.h
+++ b/arch/sh/include/asm/pci.h
diff --git a/include/asm-sh/percpu.h b/arch/sh/include/asm/percpu.h
index 4db4b39a4399..4db4b39a4399 100644
--- a/include/asm-sh/percpu.h
+++ b/arch/sh/include/asm/percpu.h
diff --git a/include/asm-sh/pgalloc.h b/arch/sh/include/asm/pgalloc.h
index 84dd2db7104c..84dd2db7104c 100644
--- a/include/asm-sh/pgalloc.h
+++ b/arch/sh/include/asm/pgalloc.h
diff --git a/include/asm-sh/pgtable.h b/arch/sh/include/asm/pgtable.h
index a4a8f8b93463..a4a8f8b93463 100644
--- a/include/asm-sh/pgtable.h
+++ b/arch/sh/include/asm/pgtable.h
diff --git a/arch/sh/include/asm/pgtable_32.h b/arch/sh/include/asm/pgtable_32.h
new file mode 100644
index 000000000000..72ea209195bd
--- /dev/null
+++ b/arch/sh/include/asm/pgtable_32.h
@@ -0,0 +1,479 @@
+#ifndef __ASM_SH_PGTABLE_32_H
+#define __ASM_SH_PGTABLE_32_H
+
+/*
+ * Linux PTEL encoding.
+ *
+ * Hardware and software bit definitions for the PTEL value (see below for
+ * notes on SH-X2 MMUs and 64-bit PTEs):
+ *
+ * - Bits 0 and 7 are reserved on SH-3 (_PAGE_WT and _PAGE_SZ1 on SH-4).
+ *
+ * - Bit 1 is the SH-bit, but is unused on SH-3 due to an MMU bug (the
+ *   hardware PTEL value can't have the SH-bit set when MMUCR.IX is set,
+ *   which is the default in cpu-sh3/mmu_context.h:MMU_CONTROL_INIT).
+ *
+ *   In order to keep this relatively clean, do not use these for defining
+ *   SH-3 specific flags until all of the other unused bits have been
+ *   exhausted.
+ *
+ * - Bit 9 is reserved by everyone and used by _PAGE_PROTNONE.
+ *
+ * - Bits 10 and 11 are low bits of the PPN that are reserved on >= 4K pages.
+ *   Bit 10 is used for _PAGE_ACCESSED, bit 11 remains unused.
+ *
+ * - On 29 bit platforms, bits 31 to 29 are used for the space attributes
+ *   and timing control which (together with bit 0) are moved into the
+ *   old-style PTEA on the parts that support it.
+ *
+ * XXX: Leave the _PAGE_FILE and _PAGE_WT overhaul for a rainy day.
+ *
+ * SH-X2 MMUs and extended PTEs
+ *
+ * SH-X2 supports an extended mode TLB with split data arrays due to the
+ * number of bits needed for PR and SZ (now EPR and ESZ) encodings. The PR and
+ * SZ bit placeholders still exist in data array 1, but are implemented as
+ * reserved bits, with the real logic existing in data array 2.
+ *
+ * The downside to this is that we can no longer fit everything in to a 32-bit
+ * PTE encoding, so a 64-bit pte_t is necessary for these parts. On the plus
+ * side, this gives us quite a few spare bits to play with for future usage.
+ */
+/* Legacy and compat mode bits */
+#define _PAGE_WT        0x001           /* WT-bit on SH-4, 0 on SH-3 */
+#define _PAGE_HW_SHARED 0x002           /* SH-bit  : shared among processes */
+#define _PAGE_DIRTY     0x004           /* D-bit   : page changed */
+#define _PAGE_CACHABLE  0x008           /* C-bit   : cachable */
+#define _PAGE_SZ0       0x010           /* SZ0-bit : Size of page */
+#define _PAGE_RW        0x020           /* PR0-bit : write access allowed */
+#define _PAGE_USER      0x040           /* PR1-bit : user space access allowed*/
+#define _PAGE_SZ1       0x080           /* SZ1-bit : Size of page (on SH-4) */
+#define _PAGE_PRESENT   0x100           /* V-bit   : page is valid */
+#define _PAGE_PROTNONE  0x200           /* software: if not present  */
+#define _PAGE_ACCESSED  0x400           /* software: page referenced */
+#define _PAGE_FILE      _PAGE_WT        /* software: pagecache or swap? */
+
+#define _PAGE_SZ_MASK   (_PAGE_SZ0 | _PAGE_SZ1)
+#define _PAGE_PR_MASK   (_PAGE_RW | _PAGE_USER)
+
+/* Extended mode bits */
+#define _PAGE_EXT_ESZ0          0x0010  /* ESZ0-bit: Size of page */
+#define _PAGE_EXT_ESZ1          0x0020  /* ESZ1-bit: Size of page */
+#define _PAGE_EXT_ESZ2          0x0040  /* ESZ2-bit: Size of page */
+#define _PAGE_EXT_ESZ3          0x0080  /* ESZ3-bit: Size of page */
+
+#define _PAGE_EXT_USER_EXEC     0x0100  /* EPR0-bit: User space executable */
+#define _PAGE_EXT_USER_WRITE    0x0200  /* EPR1-bit: User space writable */
+#define _PAGE_EXT_USER_READ     0x0400  /* EPR2-bit: User space readable */
+
+#define _PAGE_EXT_KERN_EXEC     0x0800  /* EPR3-bit: Kernel space executable */
+#define _PAGE_EXT_KERN_WRITE    0x1000  /* EPR4-bit: Kernel space writable */
+#define _PAGE_EXT_KERN_READ     0x2000  /* EPR5-bit: Kernel space readable */
+
+/* Wrapper for extended mode pgprot twiddling */
+#define _PAGE_EXT(x)            ((unsigned long long)(x) << 32)
+
+/* software: moves to PTEA.TC (Timing Control) */
+#define _PAGE_PCC_AREA5 0x00000000      /* use BSC registers for area5 */
+#define _PAGE_PCC_AREA6 0x80000000      /* use BSC registers for area6 */
+
+/* software: moves to PTEA.SA[2:0] (Space Attributes) */
+#define _PAGE_PCC_IODYN 0x00000001      /* IO space, dynamically sized bus */
+#define _PAGE_PCC_IO8   0x20000000      /* IO space, 8 bit bus */
+#define _PAGE_PCC_IO16  0x20000001      /* IO space, 16 bit bus */
+#define _PAGE_PCC_COM8  0x40000000      /* Common Memory space, 8 bit bus */
+#define _PAGE_PCC_COM16 0x40000001      /* Common Memory space, 16 bit bus */
+#define _PAGE_PCC_ATR8  0x60000000      /* Attribute Memory space, 8 bit bus */
+#define _PAGE_PCC_ATR16 0x60000001      /* Attribute Memory space, 6 bit bus */
+
+/* Mask which drops unused bits from the PTEL value */
+#if defined(CONFIG_CPU_SH3)
+#define _PAGE_CLEAR_FLAGS       (_PAGE_PROTNONE | _PAGE_ACCESSED| \
+                                 _PAGE_FILE     | _PAGE_SZ1     | \
+                                 _PAGE_HW_SHARED)
+#elif defined(CONFIG_X2TLB)
+/* Get rid of the legacy PR/SZ bits when using extended mode */
+#define _PAGE_CLEAR_FLAGS       (_PAGE_PROTNONE | _PAGE_ACCESSED | \
+                                 _PAGE_FILE | _PAGE_PR_MASK | _PAGE_SZ_MASK)
+#else
+#define _PAGE_CLEAR_FLAGS       (_PAGE_PROTNONE | _PAGE_ACCESSED | _PAGE_FILE)
+#endif
+
+#define _PAGE_FLAGS_HARDWARE_MASK       (PHYS_ADDR_MASK & ~(_PAGE_CLEAR_FLAGS))
+
+/* Hardware flags, page size encoding */
+#if !defined(CONFIG_MMU)
+# define _PAGE_FLAGS_HARD       0ULL
+#elif defined(CONFIG_X2TLB)
+# if defined(CONFIG_PAGE_SIZE_4KB)
+#  define _PAGE_FLAGS_HARD      _PAGE_EXT(_PAGE_EXT_ESZ0)
+# elif defined(CONFIG_PAGE_SIZE_8KB)
+#  define _PAGE_FLAGS_HARD      _PAGE_EXT(_PAGE_EXT_ESZ1)
+# elif defined(CONFIG_PAGE_SIZE_64KB)
+#  define _PAGE_FLAGS_HARD      _PAGE_EXT(_PAGE_EXT_ESZ2)
+# endif
+#else
+# if defined(CONFIG_PAGE_SIZE_4KB)
+#  define _PAGE_FLAGS_HARD      _PAGE_SZ0
+# elif defined(CONFIG_PAGE_SIZE_64KB)
+#  define _PAGE_FLAGS_HARD      _PAGE_SZ1
+# endif
+#endif
+
+#if defined(CONFIG_X2TLB)
+# if defined(CONFIG_HUGETLB_PAGE_SIZE_64K)
+#  define _PAGE_SZHUGE  (_PAGE_EXT_ESZ2)
+# elif defined(CONFIG_HUGETLB_PAGE_SIZE_256K)
+#  define _PAGE_SZHUGE  (_PAGE_EXT_ESZ0 | _PAGE_EXT_ESZ2)
+# elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB)
+#  define _PAGE_SZHUGE  (_PAGE_EXT_ESZ0 | _PAGE_EXT_ESZ1 | _PAGE_EXT_ESZ2)
+# elif defined(CONFIG_HUGETLB_PAGE_SIZE_4MB)
+#  define _PAGE_SZHUGE  (_PAGE_EXT_ESZ3)
+# elif defined(CONFIG_HUGETLB_PAGE_SIZE_64MB)
+#  define _PAGE_SZHUGE  (_PAGE_EXT_ESZ2 | _PAGE_EXT_ESZ3)
+# endif
+#else
+# if defined(CONFIG_HUGETLB_PAGE_SIZE_64K)
+#  define _PAGE_SZHUGE  (_PAGE_SZ1)
+# elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB)
+#  define _PAGE_SZHUGE  (_PAGE_SZ0 | _PAGE_SZ1)
+# endif
+#endif
+
+/*
+ * Stub out _PAGE_SZHUGE if we don't have a good definition for it,
+ * to make pte_mkhuge() happy.
+ */
+#ifndef _PAGE_SZHUGE
+# define _PAGE_SZHUGE   (_PAGE_FLAGS_HARD)
+#endif
+
+#define _PAGE_CHG_MASK \
+        (PTE_MASK | _PAGE_ACCESSED | _PAGE_CACHABLE | _PAGE_DIRTY)
+
+#ifndef __ASSEMBLY__
+
+#if defined(CONFIG_X2TLB) /* SH-X2 TLB */
+#define PAGE_NONE       __pgprot(_PAGE_PROTNONE | _PAGE_CACHABLE | \
+                                 _PAGE_ACCESSED | _PAGE_FLAGS_HARD)
+
+#define PAGE_SHARED     __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
+                                 _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \
+                                 _PAGE_EXT(_PAGE_EXT_KERN_READ  | \
+                                           _PAGE_EXT_KERN_WRITE | \
+                                           _PAGE_EXT_USER_READ  | \
+                                           _PAGE_EXT_USER_WRITE))
+
+#define PAGE_EXECREAD   __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
+                                 _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \
+                                 _PAGE_EXT(_PAGE_EXT_KERN_EXEC | \
+                                           _PAGE_EXT_KERN_READ | \
+                                           _PAGE_EXT_USER_EXEC | \
+                                           _PAGE_EXT_USER_READ))
+
+#define PAGE_COPY       PAGE_EXECREAD
+
+#define PAGE_READONLY   __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
+                                 _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \
+                                 _PAGE_EXT(_PAGE_EXT_KERN_READ | \
+                                           _PAGE_EXT_USER_READ))
+
+#define PAGE_WRITEONLY  __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
+                                 _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \
+                                 _PAGE_EXT(_PAGE_EXT_KERN_WRITE | \
+                                           _PAGE_EXT_USER_WRITE))
+
+#define PAGE_RWX        __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
+                                 _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \
+                                 _PAGE_EXT(_PAGE_EXT_KERN_WRITE | \
+                                           _PAGE_EXT_KERN_READ  | \
+                                           _PAGE_EXT_KERN_EXEC  | \
+                                           _PAGE_EXT_USER_WRITE | \
+                                           _PAGE_EXT_USER_READ  | \
+                                           _PAGE_EXT_USER_EXEC))
+
+#define PAGE_KERNEL     __pgprot(_PAGE_PRESENT | _PAGE_CACHABLE | \
+                                 _PAGE_DIRTY | _PAGE_ACCESSED | \
+                                 _PAGE_HW_SHARED | _PAGE_FLAGS_HARD | \
+                                 _PAGE_EXT(_PAGE_EXT_KERN_READ | \
+                                           _PAGE_EXT_KERN_WRITE | \
+                                           _PAGE_EXT_KERN_EXEC))
+
+#define PAGE_KERNEL_NOCACHE \
+                        __pgprot(_PAGE_PRESENT | _PAGE_DIRTY | \
+                                 _PAGE_ACCESSED | _PAGE_HW_SHARED | \
+                                 _PAGE_FLAGS_HARD | \
+                                 _PAGE_EXT(_PAGE_EXT_KERN_READ | \
+                                           _PAGE_EXT_KERN_WRITE | \
+                                           _PAGE_EXT_KERN_EXEC))
+
+#define PAGE_KERNEL_RO  __pgprot(_PAGE_PRESENT | _PAGE_CACHABLE | \
+                                 _PAGE_DIRTY | _PAGE_ACCESSED | \
+                                 _PAGE_HW_SHARED | _PAGE_FLAGS_HARD | \
+                                 _PAGE_EXT(_PAGE_EXT_KERN_READ | \
+                                           _PAGE_EXT_KERN_EXEC))
+
+#define PAGE_KERNEL_PCC(slot, type) \
+                        __pgprot(_PAGE_PRESENT | _PAGE_DIRTY | \
+                                 _PAGE_ACCESSED | _PAGE_FLAGS_HARD | \
+                                 _PAGE_EXT(_PAGE_EXT_KERN_READ | \
+                                           _PAGE_EXT_KERN_WRITE | \
+                                           _PAGE_EXT_KERN_EXEC) \
+                                 (slot ? _PAGE_PCC_AREA5 : _PAGE_PCC_AREA6) | \
+                                 (type))
+
+#elif defined(CONFIG_MMU) /* SH-X TLB */
+#define PAGE_NONE       __pgprot(_PAGE_PROTNONE | _PAGE_CACHABLE | \
+                                 _PAGE_ACCESSED | _PAGE_FLAGS_HARD)
+
+#define PAGE_SHARED     __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | \
+                                 _PAGE_CACHABLE | _PAGE_ACCESSED | \
+                                 _PAGE_FLAGS_HARD)
+
+#define PAGE_COPY       __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_CACHABLE | \
+                                 _PAGE_ACCESSED | _PAGE_FLAGS_HARD)
+
+#define PAGE_READONLY   __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_CACHABLE | \
+                                 _PAGE_ACCESSED | _PAGE_FLAGS_HARD)
+
+#define PAGE_EXECREAD   PAGE_READONLY
+#define PAGE_RWX        PAGE_SHARED
+#define PAGE_WRITEONLY  PAGE_SHARED
+
+#define PAGE_KERNEL     __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_CACHABLE | \
+                                 _PAGE_DIRTY | _PAGE_ACCESSED | \
+                                 _PAGE_HW_SHARED | _PAGE_FLAGS_HARD)
+
+#define PAGE_KERNEL_NOCACHE \
+                        __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | \
+                                 _PAGE_ACCESSED | _PAGE_HW_SHARED | \
+                                 _PAGE_FLAGS_HARD)
+
+#define PAGE_KERNEL_RO  __pgprot(_PAGE_PRESENT | _PAGE_CACHABLE | \
+                                 _PAGE_DIRTY | _PAGE_ACCESSED | \
+                                 _PAGE_HW_SHARED | _PAGE_FLAGS_HARD)
+
+#define PAGE_KERNEL_PCC(slot, type) \
+                        __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | \
+                                 _PAGE_ACCESSED | _PAGE_FLAGS_HARD | \
+                                 (slot ? _PAGE_PCC_AREA5 : _PAGE_PCC_AREA6) | \
+                                 (type))
+#else /* no mmu */
+#define PAGE_NONE               __pgprot(0)
+#define PAGE_SHARED             __pgprot(0)
+#define PAGE_COPY               __pgprot(0)
+#define PAGE_EXECREAD           __pgprot(0)
+#define PAGE_RWX                __pgprot(0)
+#define PAGE_READONLY           __pgprot(0)
+#define PAGE_WRITEONLY          __pgprot(0)
+#define PAGE_KERNEL             __pgprot(0)
+#define PAGE_KERNEL_NOCACHE     __pgprot(0)
+#define PAGE_KERNEL_RO          __pgprot(0)
+
+#define PAGE_KERNEL_PCC(slot, type) \
+                                __pgprot(0)
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Certain architectures need to do special things when PTEs
+ * within a page table are directly modified.  Thus, the following
+ * hook is made available.
+ */
+#ifdef CONFIG_X2TLB
+static inline void set_pte(pte_t *ptep, pte_t pte)
+{
+        ptep->pte_high = pte.pte_high;
+        smp_wmb();
+        ptep->pte_low = pte.pte_low;
+}
+#else
+#define set_pte(pteptr, pteval) (*(pteptr) = pteval)
+#endif
+
+#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
+
+/*
+ * (pmds are folded into pgds so this doesn't get actually called,
+ * but the define is needed for a generic inline function.)
+ */
+#define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval)
+
+#define pfn_pte(pfn, prot) \
+        __pte(((unsigned long long)(pfn) << PAGE_SHIFT) | pgprot_val(prot))
+#define pfn_pmd(pfn, prot) \
+        __pmd(((unsigned long long)(pfn) << PAGE_SHIFT) | pgprot_val(prot))
+
+#define pte_none(x)             (!pte_val(x))
+#define pte_present(x)          ((x).pte_low & (_PAGE_PRESENT | _PAGE_PROTNONE))
+
+#define pte_clear(mm,addr,xp) do { set_pte_at(mm, addr, xp, __pte(0)); } while (0)
+
+#define pmd_none(x)     (!pmd_val(x))
+#define pmd_present(x)  (pmd_val(x))
+#define pmd_clear(xp)   do { set_pmd(xp, __pmd(0)); } while (0)
+#define pmd_bad(x)      (pmd_val(x) & ~PAGE_MASK)
+
+#define pages_to_mb(x)  ((x) >> (20-PAGE_SHIFT))
+#define pte_page(x)     pfn_to_page(pte_pfn(x))
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+#define pte_not_present(pte)    (!((pte).pte_low & _PAGE_PRESENT))
+#define pte_dirty(pte)          ((pte).pte_low & _PAGE_DIRTY)
+#define pte_young(pte)          ((pte).pte_low & _PAGE_ACCESSED)
+#define pte_file(pte)           ((pte).pte_low & _PAGE_FILE)
+#define pte_special(pte)        (0)
+
+#ifdef CONFIG_X2TLB
+#define pte_write(pte)          ((pte).pte_high & _PAGE_EXT_USER_WRITE)
+#else
+#define pte_write(pte)          ((pte).pte_low & _PAGE_RW)
+#endif
+
+#define PTE_BIT_FUNC(h,fn,op) \
+static inline pte_t pte_##fn(pte_t pte) { pte.pte_##h op; return pte; }
+
+#ifdef CONFIG_X2TLB
+/*
+ * We cheat a bit in the SH-X2 TLB case. As the permission bits are
+ * individually toggled (and user permissions are entirely decoupled from
+ * kernel permissions), we attempt to couple them a bit more sanely here.
+ */
+PTE_BIT_FUNC(high, wrprotect, &= ~_PAGE_EXT_USER_WRITE);
+PTE_BIT_FUNC(high, mkwrite, |= _PAGE_EXT_USER_WRITE | _PAGE_EXT_KERN_WRITE);
+PTE_BIT_FUNC(high, mkhuge, |= _PAGE_SZHUGE);
+#else
+PTE_BIT_FUNC(low, wrprotect, &= ~_PAGE_RW);
+PTE_BIT_FUNC(low, mkwrite, |= _PAGE_RW);
+PTE_BIT_FUNC(low, mkhuge, |= _PAGE_SZHUGE);
+#endif
+
+PTE_BIT_FUNC(low, mkclean, &= ~_PAGE_DIRTY);
+PTE_BIT_FUNC(low, mkdirty, |= _PAGE_DIRTY);
+PTE_BIT_FUNC(low, mkold, &= ~_PAGE_ACCESSED);
+PTE_BIT_FUNC(low, mkyoung, |= _PAGE_ACCESSED);
+
+static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
+
+/*
+ * Macro and implementation to make a page protection as uncachable.
+ */
+#define pgprot_writecombine(prot) \
+        __pgprot(pgprot_val(prot) & ~_PAGE_CACHABLE)
+
+#define pgprot_noncached         pgprot_writecombine
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ *
+ * extern pte_t mk_pte(struct page *page, pgprot_t pgprot)
+ */
+#define mk_pte(page, pgprot)    pfn_pte(page_to_pfn(page), (pgprot))
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+        pte.pte_low &= _PAGE_CHG_MASK;
+        pte.pte_low |= pgprot_val(newprot);
+
+#ifdef CONFIG_X2TLB
+        pte.pte_high |= pgprot_val(newprot) >> 32;
+#endif
+
+        return pte;
+}
+
+#define pmd_page_vaddr(pmd)     ((unsigned long)pmd_val(pmd))
+#define pmd_page(pmd)           (virt_to_page(pmd_val(pmd)))
+
+/* to find an entry in a page-table-directory. */
+#define pgd_index(address)      (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1))
+#define pgd_offset(mm, address) ((mm)->pgd+pgd_index(address))
+
+/* to find an entry in a kernel page-table-directory */
+#define pgd_offset_k(address)   pgd_offset(&init_mm, address)
+
+/* Find an entry in the third-level page table.. */
+#define pte_index(address)      ((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+#define pte_offset_kernel(dir, address) \
+        ((pte_t *) pmd_page_vaddr(*(dir)) + pte_index(address))
+#define pte_offset_map(dir, address)            pte_offset_kernel(dir, address)
+#define pte_offset_map_nested(dir, address)     pte_offset_kernel(dir, address)
+
+#define pte_unmap(pte)          do { } while (0)
+#define pte_unmap_nested(pte)   do { } while (0)
+
+#ifdef CONFIG_X2TLB
+#define pte_ERROR(e) \
+        printk("%s:%d: bad pte %p(%08lx%08lx).\n", __FILE__, __LINE__, \
+               &(e), (e).pte_high, (e).pte_low)
+#define pgd_ERROR(e) \
+        printk("%s:%d: bad pgd %016llx.\n", __FILE__, __LINE__, pgd_val(e))
+#else
+#define pte_ERROR(e) \
+        printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
+#define pgd_ERROR(e) \
+        printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
+#endif
+
+/*
+ * Encode and de-code a swap entry
+ *
+ * Constraints:
+ *      _PAGE_FILE at bit 0
+ *      _PAGE_PRESENT at bit 8
+ *      _PAGE_PROTNONE at bit 9
+ *
+ * For the normal case, we encode the swap type into bits 0:7 and the
+ * swap offset into bits 10:30. For the 64-bit PTE case, we keep the
+ * preserved bits in the low 32-bits and use the upper 32 as the swap
+ * offset (along with a 5-bit type), following the same approach as x86
+ * PAE. This keeps the logic quite simple, and allows for a full 32
+ * PTE_FILE_MAX_BITS, as opposed to the 29-bits we're constrained with
+ * in the pte_low case.
+ *
+ * As is evident by the Alpha code, if we ever get a 64-bit unsigned
+ * long (swp_entry_t) to match up with the 64-bit PTEs, this all becomes
+ * much cleaner..
+ *
+ * NOTE: We should set ZEROs at the position of _PAGE_PRESENT
+ *       and _PAGE_PROTNONE bits
+ */
+#ifdef CONFIG_X2TLB
+#define __swp_type(x)                   ((x).val & 0x1f)
+#define __swp_offset(x)                 ((x).val >> 5)
+#define __swp_entry(type, offset)       ((swp_entry_t){ (type) | (offset) << 5})
+#define __pte_to_swp_entry(pte)         ((swp_entry_t){ (pte).pte_high })
+#define __swp_entry_to_pte(x)           ((pte_t){ 0, (x).val })
+
+/*
+ * Encode and decode a nonlinear file mapping entry
+ */
+#define pte_to_pgoff(pte)               ((pte).pte_high)
+#define pgoff_to_pte(off)               ((pte_t) { _PAGE_FILE, (off) })
+
+#define PTE_FILE_MAX_BITS               32
+#else
+#define __swp_type(x)                   ((x).val & 0xff)
+#define __swp_offset(x)                 ((x).val >> 10)
+#define __swp_entry(type, offset)       ((swp_entry_t){(type) | (offset) <<10})
+
+#define __pte_to_swp_entry(pte)         ((swp_entry_t) { pte_val(pte) >> 1 })
+#define __swp_entry_to_pte(x)           ((pte_t) { (x).val << 1 })
+
+/*
+ * Encode and decode a nonlinear file mapping entry
+ */
+#define PTE_FILE_MAX_BITS       29
+#define pte_to_pgoff(pte)       (pte_val(pte) >> 1)
+#define pgoff_to_pte(off)       ((pte_t) { ((off) << 1) | _PAGE_FILE })
+#endif
+
+#endif /* __ASSEMBLY__ */
+#endif /* __ASM_SH_PGTABLE_32_H */
diff --git a/include/asm-sh/pgtable_64.h b/arch/sh/include/asm/pgtable_64.h
index c78990cda557..c78990cda557 100644
--- a/include/asm-sh/pgtable_64.h
+++ b/arch/sh/include/asm/pgtable_64.h
diff --git a/include/asm-sh/pm.h b/arch/sh/include/asm/pm.h
index 56fdbd6b1c94..56fdbd6b1c94 100644
--- a/include/asm-sh/pm.h
+++ b/arch/sh/include/asm/pm.h
diff --git a/include/asm-sh/poll.h b/arch/sh/include/asm/poll.h
index c98509d3149e..c98509d3149e 100644
--- a/include/asm-sh/poll.h
+++ b/arch/sh/include/asm/poll.h
diff --git a/include/asm-sh/posix_types.h b/arch/sh/include/asm/posix_types.h
index 4eeb723aee7e..4eeb723aee7e 100644
--- a/include/asm-sh/posix_types.h
+++ b/arch/sh/include/asm/posix_types.h
diff --git a/include/asm-sh/posix_types_32.h b/arch/sh/include/asm/posix_types_32.h
index 0a3d2f54ab27..0a3d2f54ab27 100644
--- a/include/asm-sh/posix_types_32.h
+++ b/arch/sh/include/asm/posix_types_32.h
diff --git a/include/asm-sh/posix_types_64.h b/arch/sh/include/asm/posix_types_64.h
index 0620317a6f0f..0620317a6f0f 100644
--- a/include/asm-sh/posix_types_64.h
+++ b/arch/sh/include/asm/posix_types_64.h
diff --git a/arch/sh/include/asm/processor.h b/arch/sh/include/asm/processor.h
new file mode 100644
index 000000000000..15d9f92ca383
--- /dev/null
+++ b/arch/sh/include/asm/processor.h
@@ -0,0 +1,66 @@
+#ifndef __ASM_SH_PROCESSOR_H
+#define __ASM_SH_PROCESSOR_H
+
+#include <asm/cpu-features.h>
+#include <asm/segment.h>
+
+#ifndef __ASSEMBLY__
+/*
+ *  CPU type and hardware bug flags. Kept separately for each CPU.
+ *
+ *  Each one of these also needs a CONFIG_CPU_SUBTYPE_xxx entry
+ *  in arch/sh/mm/Kconfig, as well as an entry in arch/sh/kernel/setup.c
+ *  for parsing the subtype in get_cpu_subtype().
+ */
+enum cpu_type {
+        /* SH-2 types */
+        CPU_SH7619,
+
+        /* SH-2A types */
+        CPU_SH7203, CPU_SH7206, CPU_SH7263, CPU_MXG,
+
+        /* SH-3 types */
+        CPU_SH7705, CPU_SH7706, CPU_SH7707,
+        CPU_SH7708, CPU_SH7708S, CPU_SH7708R,
+        CPU_SH7709, CPU_SH7709A, CPU_SH7710, CPU_SH7712,
+        CPU_SH7720, CPU_SH7721, CPU_SH7729,
+
+        /* SH-4 types */
+        CPU_SH7750, CPU_SH7750S, CPU_SH7750R, CPU_SH7751, CPU_SH7751R,
+        CPU_SH7760, CPU_SH4_202, CPU_SH4_501,
+
+        /* SH-4A types */
+        CPU_SH7763, CPU_SH7770, CPU_SH7780, CPU_SH7781, CPU_SH7785,
+        CPU_SH7723, CPU_SHX3,
+
+        /* SH4AL-DSP types */
+        CPU_SH7343, CPU_SH7722, CPU_SH7366,
+
+        /* SH-5 types */
+        CPU_SH5_101, CPU_SH5_103,
+
+        /* Unknown subtype */
+        CPU_SH_NONE
+};
+
+/* Forward decl */
+struct sh_cpuinfo;
+
+/* arch/sh/kernel/setup.c */
+const char *get_cpu_subtype(struct sh_cpuinfo *c);
+
+#ifdef CONFIG_VSYSCALL
+int vsyscall_init(void);
+#else
+#define vsyscall_init() do { } while (0)
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#ifdef CONFIG_SUPERH32
+# include "processor_32.h"
+#else
+# include "processor_64.h"
+#endif
+
+#endif /* __ASM_SH_PROCESSOR_H */
diff --git a/arch/sh/include/asm/processor_32.h b/arch/sh/include/asm/processor_32.h
new file mode 100644
index 000000000000..0dadd75bd93c
--- /dev/null
+++ b/arch/sh/include/asm/processor_32.h
@@ -0,0 +1,216 @@
+/*
+ * include/asm-sh/processor.h
+ *
+ * Copyright (C) 1999, 2000  Niibe Yutaka
+ * Copyright (C) 2002, 2003  Paul Mundt
+ */
+
+#ifndef __ASM_SH_PROCESSOR_32_H
+#define __ASM_SH_PROCESSOR_32_H
+#ifdef __KERNEL__
+
+#include <linux/compiler.h>
+#include <asm/page.h>
+#include <asm/types.h>
+#include <asm/cache.h>
+#include <asm/ptrace.h>
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ void *pc; __asm__("mova  1f, %0\n.align 2\n1:":"=z" (pc)); pc; })
+
+/* Core Processor Version Register */
+#define CCN_PVR         0xff000030
+#define CCN_CVR         0xff000040
+#define CCN_PRR         0xff000044
+
+struct sh_cpuinfo {
+        unsigned int type;
+        int cut_major, cut_minor;
+        unsigned long loops_per_jiffy;
+        unsigned long asid_cache;
+
+        struct cache_info icache;       /* Primary I-cache */
+        struct cache_info dcache;       /* Primary D-cache */
+        struct cache_info scache;       /* Secondary cache */
+
+        unsigned long flags;
+} __attribute__ ((aligned(L1_CACHE_BYTES)));
+
+extern struct sh_cpuinfo cpu_data[];
+#define boot_cpu_data cpu_data[0]
+#define current_cpu_data cpu_data[smp_processor_id()]
+#define raw_current_cpu_data cpu_data[raw_smp_processor_id()]
+
+/*
+ * User space process size: 2GB.
+ *
+ * Since SH7709 and SH7750 have "area 7", we can't use 0x7c000000--0x7fffffff
+ */
+#define TASK_SIZE       0x7c000000UL
+
+#define STACK_TOP       TASK_SIZE
+#define STACK_TOP_MAX   STACK_TOP
+
+/* This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define TASK_UNMAPPED_BASE      (TASK_SIZE / 3)
+
+/*
+ * Bit of SR register
+ *
+ * FD-bit:
+ *     When it's set, it means the processor doesn't have right to use FPU,
+ *     and it results exception when the floating operation is executed.
+ *
+ * IMASK-bit:
+ *     Interrupt level mask
+ */
+#define SR_DSP          0x00001000
+#define SR_IMASK        0x000000f0
+#define SR_FD           0x00008000
+
+/*
+ * FPU structure and data
+ */
+
+struct sh_fpu_hard_struct {
+        unsigned long fp_regs[16];
+        unsigned long xfp_regs[16];
+        unsigned long fpscr;
+        unsigned long fpul;
+
+        long status; /* software status information */
+};
+
+/* Dummy fpu emulator  */
+struct sh_fpu_soft_struct {
+        unsigned long fp_regs[16];
+        unsigned long xfp_regs[16];
+        unsigned long fpscr;
+        unsigned long fpul;
+
+        unsigned char lookahead;
+        unsigned long entry_pc;
+};
+
+union sh_fpu_union {
+        struct sh_fpu_hard_struct hard;
+        struct sh_fpu_soft_struct soft;
+};
+
+struct thread_struct {
+        /* Saved registers when thread is descheduled */
+        unsigned long sp;
+        unsigned long pc;
+
+        /* Hardware debugging registers */
+        unsigned long ubc_pc;
+
+        /* floating point info */
+        union sh_fpu_union fpu;
+};
+
+/* Count of active tasks with UBC settings */
+extern int ubc_usercnt;
+
+#define INIT_THREAD  {                                          \
+        .sp = sizeof(init_stack) + (long) &init_stack,          \
+}
+
+/*
+ * Do necessary setup to start up a newly executed thread.
+ */
+#define start_thread(regs, new_pc, new_sp)       \
+        set_fs(USER_DS);                         \
+        regs->pr = 0;                            \
+        regs->sr = SR_FD;       /* User mode. */ \
+        regs->pc = new_pc;                       \
+        regs->regs[15] = new_sp
+
+/* Forward declaration, a strange C thing */
+struct task_struct;
+struct mm_struct;
+
+/* Free all resources held by a thread. */
+extern void release_thread(struct task_struct *);
+
+/* Prepare to copy thread state - unlazy all lazy status */
+#define prepare_to_copy(tsk)    do { } while (0)
+
+/*
+ * create a kernel thread without removing it from tasklists
+ */
+extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
+
+/* Copy and release all segment info associated with a VM */
+#define copy_segments(p, mm)    do { } while(0)
+#define release_segments(mm)    do { } while(0)
+
+/*
+ * FPU lazy state save handling.
+ */
+
+static __inline__ void disable_fpu(void)
+{
+        unsigned long __dummy;
+
+        /* Set FD flag in SR */
+        __asm__ __volatile__("stc       sr, %0\n\t"
+                             "or        %1, %0\n\t"
+                             "ldc       %0, sr"
+                             : "=&r" (__dummy)
+                             : "r" (SR_FD));
+}
+
+static __inline__ void enable_fpu(void)
+{
+        unsigned long __dummy;
+
+        /* Clear out FD flag in SR */
+        __asm__ __volatile__("stc       sr, %0\n\t"
+                             "and       %1, %0\n\t"
+                             "ldc       %0, sr"
+                             : "=&r" (__dummy)
+                             : "r" (~SR_FD));
+}
+
+/* Double presision, NANS as NANS, rounding to nearest, no exceptions */
+#define FPSCR_INIT  0x00080000
+
+#define FPSCR_CAUSE_MASK        0x0001f000      /* Cause bits */
+#define FPSCR_FLAG_MASK         0x0000007c      /* Flag bits */
+
+/*
+ * Return saved PC of a blocked thread.
+ */
+#define thread_saved_pc(tsk)    (tsk->thread.pc)
+
+void show_trace(struct task_struct *tsk, unsigned long *sp,
+                struct pt_regs *regs);
+extern unsigned long get_wchan(struct task_struct *p);
+
+#define KSTK_EIP(tsk)  (task_pt_regs(tsk)->pc)
+#define KSTK_ESP(tsk)  (task_pt_regs(tsk)->regs[15])
+
+#define cpu_sleep()     __asm__ __volatile__ ("sleep" : : : "memory")
+#define cpu_relax()     barrier()
+
+#if defined(CONFIG_CPU_SH2A) || defined(CONFIG_CPU_SH3) || \
+    defined(CONFIG_CPU_SH4)
+#define PREFETCH_STRIDE         L1_CACHE_BYTES
+#define ARCH_HAS_PREFETCH
+#define ARCH_HAS_PREFETCHW
+static inline void prefetch(void *x)
+{
+        __asm__ __volatile__ ("pref @%0\n\t" : : "r" (x) : "memory");
+}
+
+#define prefetchw(x)    prefetch(x)
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_PROCESSOR_32_H */
diff --git a/arch/sh/include/asm/processor_64.h b/arch/sh/include/asm/processor_64.h
new file mode 100644
index 000000000000..770d5169983b
--- /dev/null
+++ b/arch/sh/include/asm/processor_64.h
@@ -0,0 +1,275 @@
+#ifndef __ASM_SH_PROCESSOR_64_H
+#define __ASM_SH_PROCESSOR_64_H
+
+/*
+ * include/asm-sh/processor_64.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2003  Paul Mundt
+ * Copyright (C) 2004  Richard Curnow
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASSEMBLY__
+
+#include <linux/compiler.h>
+#include <asm/page.h>
+#include <asm/types.h>
+#include <asm/cache.h>
+#include <asm/ptrace.h>
+#include <cpu/registers.h>
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ \
+void *pc; \
+unsigned long long __dummy = 0; \
+__asm__("gettr  tr0, %1\n\t" \
+        "pta    4, tr0\n\t" \
+        "gettr  tr0, %0\n\t" \
+        "ptabs  %1, tr0\n\t"    \
+        :"=r" (pc), "=r" (__dummy) \
+        : "1" (__dummy)); \
+pc; })
+
+/*
+ * TLB information structure
+ *
+ * Defined for both I and D tlb, per-processor.
+ */
+struct tlb_info {
+        unsigned long long next;
+        unsigned long long first;
+        unsigned long long last;
+
+        unsigned int entries;
+        unsigned int step;
+
+        unsigned long flags;
+};
+
+struct sh_cpuinfo {
+        enum cpu_type type;
+        unsigned long loops_per_jiffy;
+        unsigned long asid_cache;
+
+        unsigned int cpu_clock, master_clock, bus_clock, module_clock;
+
+        /* Cache info */
+        struct cache_info icache;
+        struct cache_info dcache;
+        struct cache_info scache;
+
+        /* TLB info */
+        struct tlb_info itlb;
+        struct tlb_info dtlb;
+
+        unsigned long flags;
+};
+
+extern struct sh_cpuinfo cpu_data[];
+#define boot_cpu_data cpu_data[0]
+#define current_cpu_data cpu_data[smp_processor_id()]
+#define raw_current_cpu_data cpu_data[raw_smp_processor_id()]
+
+#endif
+
+/*
+ * User space process size: 2GB - 4k.
+ */
+#define TASK_SIZE       0x7ffff000UL
+
+#define STACK_TOP       TASK_SIZE
+#define STACK_TOP_MAX   STACK_TOP
+
+/* This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define TASK_UNMAPPED_BASE      (TASK_SIZE / 3)
+
+/*
+ * Bit of SR register
+ *
+ * FD-bit:
+ *     When it's set, it means the processor doesn't have right to use FPU,
+ *     and it results exception when the floating operation is executed.
+ *
+ * IMASK-bit:
+ *     Interrupt level mask
+ *
+ * STEP-bit:
+ *     Single step bit
+ *
+ */
+#if defined(CONFIG_SH64_SR_WATCH)
+#define SR_MMU   0x84000000
+#else
+#define SR_MMU   0x80000000
+#endif
+
+#define SR_IMASK 0x000000f0
+#define SR_FD    0x00008000
+#define SR_SSTEP 0x08000000
+
+#ifndef __ASSEMBLY__
+
+/*
+ * FPU structure and data : require 8-byte alignment as we need to access it
+   with fld.p, fst.p
+ */
+
+struct sh_fpu_hard_struct {
+        unsigned long fp_regs[64];
+        unsigned int fpscr;
+        /* long status; * software status information */
+};
+
+#if 0
+/* Dummy fpu emulator  */
+struct sh_fpu_soft_struct {
+        unsigned long long fp_regs[32];
+        unsigned int fpscr;
+        unsigned char lookahead;
+        unsigned long entry_pc;
+};
+#endif
+
+union sh_fpu_union {
+        struct sh_fpu_hard_struct hard;
+        /* 'hard' itself only produces 32 bit alignment, yet we need
+           to access it using 64 bit load/store as well. */
+        unsigned long long alignment_dummy;
+};
+
+struct thread_struct {
+        unsigned long sp;
+        unsigned long pc;
+        /* This stores the address of the pt_regs built during a context
+           switch, or of the register save area built for a kernel mode
+           exception.  It is used for backtracing the stack of a sleeping task
+           or one that traps in kernel mode. */
+        struct pt_regs *kregs;
+        /* This stores the address of the pt_regs constructed on entry from
+           user mode.  It is a fixed value over the lifetime of a process, or
+           NULL for a kernel thread. */
+        struct pt_regs *uregs;
+
+        unsigned long trap_no, error_code;
+        unsigned long address;
+        /* Hardware debugging registers may come here */
+
+        /* floating point info */
+        union sh_fpu_union fpu;
+};
+
+#define INIT_MMAP \
+{ &init_mm, 0, 0, NULL, PAGE_SHARED, VM_READ | VM_WRITE | VM_EXEC, 1, NULL, NULL }
+
+extern  struct pt_regs fake_swapper_regs;
+
+#define INIT_THREAD  {                          \
+        .sp             = sizeof(init_stack) +  \
+                          (long) &init_stack,   \
+        .pc             = 0,                    \
+        .kregs          = &fake_swapper_regs,   \
+        .uregs          = NULL,                 \
+        .trap_no        = 0,                    \
+        .error_code     = 0,                    \
+        .address        = 0,                    \
+        .fpu            = { { { 0, } }, }       \
+}
+
+/*
+ * Do necessary setup to start up a newly executed thread.
+ */
+#define SR_USER (SR_MMU | SR_FD)
+
+#define start_thread(regs, new_pc, new_sp)                      \
+        set_fs(USER_DS);                                        \
+        regs->sr = SR_USER;     /* User mode. */                \
+        regs->pc = new_pc - 4;  /* Compensate syscall exit */   \
+        regs->pc |= 1;          /* Set SHmedia ! */             \
+        regs->regs[18] = 0;                                     \
+        regs->regs[15] = new_sp
+
+/* Forward declaration, a strange C thing */
+struct task_struct;
+struct mm_struct;
+
+/* Free all resources held by a thread. */
+extern void release_thread(struct task_struct *);
+/*
+ * create a kernel thread without removing it from tasklists
+ */
+extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
+
+
+/* Copy and release all segment info associated with a VM */
+#define copy_segments(p, mm)    do { } while (0)
+#define release_segments(mm)    do { } while (0)
+#define forget_segments()       do { } while (0)
+#define prepare_to_copy(tsk)    do { } while (0)
+/*
+ * FPU lazy state save handling.
+ */
+
+static inline void disable_fpu(void)
+{
+        unsigned long long __dummy;
+
+        /* Set FD flag in SR */
+        __asm__ __volatile__("getcon    " __SR ", %0\n\t"
+                             "or        %0, %1, %0\n\t"
+                             "putcon    %0, " __SR "\n\t"
+                             : "=&r" (__dummy)
+                             : "r" (SR_FD));
+}
+
+static inline void enable_fpu(void)
+{
+        unsigned long long __dummy;
+
+        /* Clear out FD flag in SR */
+        __asm__ __volatile__("getcon    " __SR ", %0\n\t"
+                             "and       %0, %1, %0\n\t"
+                             "putcon    %0, " __SR "\n\t"
+                             : "=&r" (__dummy)
+                             : "r" (~SR_FD));
+}
+
+/* Round to nearest, no exceptions on inexact, overflow, underflow,
+   zero-divide, invalid.  Configure option for whether to flush denorms to
+   zero, or except if a denorm is encountered.  */
+#if defined(CONFIG_SH64_FPU_DENORM_FLUSH)
+#define FPSCR_INIT  0x00040000
+#else
+#define FPSCR_INIT  0x00000000
+#endif
+
+#ifdef CONFIG_SH_FPU
+/* Initialise the FP state of a task */
+void fpinit(struct sh_fpu_hard_struct *fpregs);
+#else
+#define fpinit(fpregs)  do { } while (0)
+#endif
+
+extern struct task_struct *last_task_used_math;
+
+/*
+ * Return saved PC of a blocked thread.
+ */
+#define thread_saved_pc(tsk)    (tsk->thread.pc)
+
+extern unsigned long get_wchan(struct task_struct *p);
+
+#define KSTK_EIP(tsk)  ((tsk)->thread.pc)
+#define KSTK_ESP(tsk)  ((tsk)->thread.sp)
+
+#define cpu_relax()     barrier()
+
+#endif  /* __ASSEMBLY__ */
+#endif /* __ASM_SH_PROCESSOR_64_H */
diff --git a/arch/sh/include/asm/ptrace.h b/arch/sh/include/asm/ptrace.h
new file mode 100644
index 000000000000..643ab5a7cf3b
--- /dev/null
+++ b/arch/sh/include/asm/ptrace.h
@@ -0,0 +1,130 @@
+#ifndef __ASM_SH_PTRACE_H
+#define __ASM_SH_PTRACE_H
+
+/*
+ * Copyright (C) 1999, 2000  Niibe Yutaka
+ *
+ */
+#if defined(__SH5__)
+struct pt_regs {
+        unsigned long long pc;
+        unsigned long long sr;
+        unsigned long long syscall_nr;
+        unsigned long long regs[63];
+        unsigned long long tregs[8];
+        unsigned long long pad[2];
+};
+#else
+/*
+ * GCC defines register number like this:
+ * -----------------------------
+ *       0 - 15 are integer registers
+ *      17 - 22 are control/special registers
+ *      24 - 39 fp registers
+ *      40 - 47 xd registers
+ *      48 -    fpscr register
+ * -----------------------------
+ *
+ * We follows above, except:
+ *      16 --- program counter (PC)
+ *      22 --- syscall #
+ *      23 --- floating point communication register
+ */
+#define REG_REG0         0
+#define REG_REG15       15
+
+#define REG_PC          16
+
+#define REG_PR          17
+#define REG_SR          18
+#define REG_GBR         19
+#define REG_MACH        20
+#define REG_MACL        21
+
+#define REG_SYSCALL     22
+
+#define REG_FPREG0      23
+#define REG_FPREG15     38
+#define REG_XFREG0      39
+#define REG_XFREG15     54
+
+#define REG_FPSCR       55
+#define REG_FPUL        56
+
+/*
+ * This struct defines the way the registers are stored on the
+ * kernel stack during a system call or other kernel entry.
+ */
+struct pt_regs {
+        unsigned long regs[16];
+        unsigned long pc;
+        unsigned long pr;
+        unsigned long sr;
+        unsigned long gbr;
+        unsigned long mach;
+        unsigned long macl;
+        long tra;
+};
+
+/*
+ * This struct defines the way the DSP registers are stored on the
+ * kernel stack during a system call or other kernel entry.
+ */
+struct pt_dspregs {
+        unsigned long   a1;
+        unsigned long   a0g;
+        unsigned long   a1g;
+        unsigned long   m0;
+        unsigned long   m1;
+        unsigned long   a0;
+        unsigned long   x0;
+        unsigned long   x1;
+        unsigned long   y0;
+        unsigned long   y1;
+        unsigned long   dsr;
+        unsigned long   rs;
+        unsigned long   re;
+        unsigned long   mod;
+};
+
+#define PTRACE_GETFDPIC         31      /* get the ELF fdpic loadmap address */
+
+#define PTRACE_GETFDPIC_EXEC    0       /* [addr] request the executable loadmap */
+#define PTRACE_GETFDPIC_INTERP  1       /* [addr] request the interpreter loadmap */
+
+#define PTRACE_GETDSPREGS       55
+#define PTRACE_SETDSPREGS       56
+#endif
+
+#ifdef __KERNEL__
+#include <asm/addrspace.h>
+
+#define user_mode(regs)                 (((regs)->sr & 0x40000000)==0)
+#define instruction_pointer(regs)       ((unsigned long)(regs)->pc)
+
+extern void show_regs(struct pt_regs *);
+
+#ifdef CONFIG_SH_DSP
+#define task_pt_regs(task) \
+        ((struct pt_regs *) (task_stack_page(task) + THREAD_SIZE \
+                 - sizeof(struct pt_dspregs) - sizeof(unsigned long)) - 1)
+#else
+#define task_pt_regs(task) \
+        ((struct pt_regs *) (task_stack_page(task) + THREAD_SIZE \
+                 - sizeof(unsigned long)) - 1)
+#endif
+
+static inline unsigned long profile_pc(struct pt_regs *regs)
+{
+        unsigned long pc = instruction_pointer(regs);
+
+#ifdef P2SEG
+        if (pc >= P2SEG && pc < P3SEG)
+                pc -= 0x20000000;
+#endif
+
+        return pc;
+}
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_SH_PTRACE_H */
diff --git a/include/asm-sh/push-switch.h b/arch/sh/include/asm/push-switch.h
index 4903f9e52dd8..4903f9e52dd8 100644
--- a/include/asm-sh/push-switch.h
+++ b/arch/sh/include/asm/push-switch.h
diff --git a/include/asm-sh/r7780rp.h b/arch/sh/include/asm/r7780rp.h
index 306f7359f7d4..306f7359f7d4 100644
--- a/include/asm-sh/r7780rp.h
+++ b/arch/sh/include/asm/r7780rp.h
diff --git a/include/asm-sh/resource.h b/arch/sh/include/asm/resource.h
index 9c2499a86ec0..9c2499a86ec0 100644
--- a/include/asm-sh/resource.h
+++ b/arch/sh/include/asm/resource.h
diff --git a/arch/sh/include/asm/rtc.h b/arch/sh/include/asm/rtc.h
new file mode 100644
index 000000000000..1813f4202a24
--- /dev/null
+++ b/arch/sh/include/asm/rtc.h
@@ -0,0 +1,16 @@
+#ifndef _ASM_RTC_H
+#define _ASM_RTC_H
+
+extern void (*board_time_init)(void);
+extern void (*rtc_sh_get_time)(struct timespec *);
+extern int (*rtc_sh_set_time)(const time_t);
+
+#define RTC_CAP_4_DIGIT_YEAR    (1 << 0)
+
+struct sh_rtc_platform_info {
+        unsigned long capabilities;
+};
+
+#include <cpu/rtc.h>
+
+#endif /* _ASM_RTC_H */
diff --git a/include/asm-sh/rts7751r2d.h b/arch/sh/include/asm/rts7751r2d.h
index 0a800157b826..0a800157b826 100644
--- a/include/asm-sh/rts7751r2d.h
+++ b/arch/sh/include/asm/rts7751r2d.h
diff --git a/include/asm-sh/rwsem.h b/arch/sh/include/asm/rwsem.h
index 1987f3ea7f1b..1987f3ea7f1b 100644
--- a/include/asm-sh/rwsem.h
+++ b/arch/sh/include/asm/rwsem.h
diff --git a/include/asm-sh/scatterlist.h b/arch/sh/include/asm/scatterlist.h
index 2084d0373693..2084d0373693 100644
--- a/include/asm-sh/scatterlist.h
+++ b/arch/sh/include/asm/scatterlist.h
diff --git a/include/asm-sh/sdk7780.h b/arch/sh/include/asm/sdk7780.h
index 697dc865f21b..697dc865f21b 100644
--- a/include/asm-sh/sdk7780.h
+++ b/arch/sh/include/asm/sdk7780.h
diff --git a/include/asm-sh/sections.h b/arch/sh/include/asm/sections.h
index 8f8f4ad400df..8f8f4ad400df 100644
--- a/include/asm-sh/sections.h
+++ b/arch/sh/include/asm/sections.h
diff --git a/arch/sh/include/asm/segment.h b/arch/sh/include/asm/segment.h
new file mode 100644
index 000000000000..5e2725f4ac49
--- /dev/null
+++ b/arch/sh/include/asm/segment.h
@@ -0,0 +1,34 @@
+#ifndef __ASM_SH_SEGMENT_H
+#define __ASM_SH_SEGMENT_H
+
+#ifndef __ASSEMBLY__
+
+typedef struct {
+        unsigned long seg;
+} mm_segment_t;
+
+#define MAKE_MM_SEG(s)  ((mm_segment_t) { (s) })
+
+/*
+ * The fs value determines whether argument validity checking should be
+ * performed or not.  If get_fs() == USER_DS, checking is performed, with
+ * get_fs() == KERNEL_DS, checking is bypassed.
+ *
+ * For historical reasons, these macros are grossly misnamed.
+ */
+#define KERNEL_DS       MAKE_MM_SEG(0xFFFFFFFFUL)
+#ifdef CONFIG_MMU
+#define USER_DS         MAKE_MM_SEG(PAGE_OFFSET)
+#else
+#define USER_DS         KERNEL_DS
+#endif
+
+#define segment_eq(a,b) ((a).seg == (b).seg)
+
+#define get_ds()        (KERNEL_DS)
+
+#define get_fs()        (current_thread_info()->addr_limit)
+#define set_fs(x)       (current_thread_info()->addr_limit = (x))
+
+#endif /* __ASSEMBLY__ */
+#endif /* __ASM_SH_SEGMENT_H */
diff --git a/include/asm-sh/sembuf.h b/arch/sh/include/asm/sembuf.h
index d79f3bd570b2..d79f3bd570b2 100644
--- a/include/asm-sh/sembuf.h
+++ b/arch/sh/include/asm/sembuf.h
diff --git a/arch/sh/include/asm/serial.h b/arch/sh/include/asm/serial.h
new file mode 100644
index 000000000000..e13cc948ee60
--- /dev/null
+++ b/arch/sh/include/asm/serial.h
@@ -0,0 +1,36 @@
+/*
+ * include/asm-sh/serial.h
+ *
+ * Configuration details for 8250, 16450, 16550, etc. serial ports
+ */
+
+#ifndef _ASM_SERIAL_H
+#define _ASM_SERIAL_H
+
+#include <linux/kernel.h>
+
+/*
+ * This assumes you have a 1.8432 MHz clock for your UART.
+ *
+ * It'd be nice if someone built a serial card with a 24.576 MHz
+ * clock, since the 16550A is capable of handling a top speed of 1.5
+ * megabits/second; but this requires the faster clock.
+ */
+#define BASE_BAUD ( 1843200 / 16 )
+
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
+
+#ifdef CONFIG_HD64465
+#include <asm/hd64465/hd64465.h>
+
+#define SERIAL_PORT_DFNS                   \
+        /* UART CLK   PORT IRQ     FLAGS        */                      \
+        { 0, BASE_BAUD, 0x3F8, HD64465_IRQ_UART, STD_COM_FLAGS }  /* ttyS0 */
+
+#else
+
+#define SERIAL_PORT_DFNS
+
+#endif
+
+#endif /* _ASM_SERIAL_H */
diff --git a/include/asm-sh/setup.h b/arch/sh/include/asm/setup.h
index 55a2bd328d99..55a2bd328d99 100644
--- a/include/asm-sh/setup.h
+++ b/arch/sh/include/asm/setup.h
diff --git a/include/asm-sh/sfp-machine.h b/arch/sh/include/asm/sfp-machine.h
index d3c548443f2a..d3c548443f2a 100644
--- a/include/asm-sh/sfp-machine.h
+++ b/arch/sh/include/asm/sfp-machine.h
diff --git a/include/asm-sh/sh7760fb.h b/arch/sh/include/asm/sh7760fb.h
index 8767f61aceca..8767f61aceca 100644
--- a/include/asm-sh/sh7760fb.h
+++ b/arch/sh/include/asm/sh7760fb.h
diff --git a/arch/sh/include/asm/sh7763rdp.h b/arch/sh/include/asm/sh7763rdp.h
new file mode 100644
index 000000000000..8750cc852977
--- /dev/null
+++ b/arch/sh/include/asm/sh7763rdp.h
@@ -0,0 +1,54 @@
+#ifndef __ASM_SH_SH7763RDP_H
+#define __ASM_SH_SH7763RDP_H
+
+/*
+ * linux/include/asm-sh/sh7763drp.h
+ *
+ * Copyright (C) 2008 Renesas Solutions
+ * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#include <asm/addrspace.h>
+
+/* clock control */
+#define MSTPCR1 0xFFC80038
+
+/* PORT */
+#define PORT_PSEL0      0xFFEF0070
+#define PORT_PSEL1      0xFFEF0072
+#define PORT_PSEL2      0xFFEF0074
+#define PORT_PSEL3      0xFFEF0076
+#define PORT_PSEL4      0xFFEF0078
+
+#define PORT_PACR       0xFFEF0000
+#define PORT_PCCR       0xFFEF0004
+#define PORT_PFCR       0xFFEF000A
+#define PORT_PGCR       0xFFEF000C
+#define PORT_PHCR       0xFFEF000E
+#define PORT_PICR       0xFFEF0010
+#define PORT_PJCR       0xFFEF0012
+#define PORT_PKCR       0xFFEF0014
+#define PORT_PLCR       0xFFEF0016
+#define PORT_PMCR       0xFFEF0018
+#define PORT_PNCR       0xFFEF001A
+
+/* FPGA */
+#define CPLD_BOARD_ID_ERV_REG   0xB1000000
+#define CPLD_CPLD_CMD_REG               0xB1000006
+
+/*
+ * USB SH7763RDP board can use Host only.
+ */
+#define USB_USBHSC      0xFFEC80f0
+
+/* arch/sh/boards/renesas/sh7763rdp/irq.c */
+void init_sh7763rdp_IRQ(void);
+int sh7763rdp_irq_demux(int irq);
+#define __IO_PREFIX     sh7763rdp
+#include <asm/io_generic.h>
+
+#endif /* __ASM_SH_SH7763RDP_H */
diff --git a/arch/sh/include/asm/sh7785lcr.h b/arch/sh/include/asm/sh7785lcr.h
new file mode 100644
index 000000000000..1ce27d5c7491
--- /dev/null
+++ b/arch/sh/include/asm/sh7785lcr.h
@@ -0,0 +1,55 @@
+#ifndef __ASM_SH_RENESAS_SH7785LCR_H
+#define __ASM_SH_RENESAS_SH7785LCR_H
+
+/*
+ * This board has 2 physical memory maps.
+ * It can be changed with DIP switch(S2-5).
+ *
+ * phys address                 | S2-5 = OFF    | S2-5 = ON
+ * -----------------------------+---------------+---------------
+ * 0x00000000 - 0x03ffffff(CS0) | NOR Flash     | NOR Flash
+ * 0x04000000 - 0x05ffffff(CS1) | PLD           | PLD
+ * 0x06000000 - 0x07ffffff(CS1) | reserved      | I2C
+ * 0x08000000 - 0x0bffffff(CS2) | USB           | DDR SDRAM
+ * 0x0c000000 - 0x0fffffff(CS3) | SD            | DDR SDRAM
+ * 0x10000000 - 0x13ffffff(CS4) | SM107         | SM107
+ * 0x14000000 - 0x17ffffff(CS5) | I2C           | USB
+ * 0x18000000 - 0x1bffffff(CS6) | reserved      | SD
+ * 0x40000000 - 0x5fffffff      | DDR SDRAM     | (cannot use)
+ *
+ */
+
+#define NOR_FLASH_ADDR          0x00000000
+#define NOR_FLASH_SIZE          0x04000000
+
+#define PLD_BASE_ADDR           0x04000000
+#define PLD_PCICR               (PLD_BASE_ADDR + 0x00)
+#define PLD_LCD_BK_CONTR        (PLD_BASE_ADDR + 0x02)
+#define PLD_LOCALCR             (PLD_BASE_ADDR + 0x04)
+#define PLD_POFCR               (PLD_BASE_ADDR + 0x06)
+#define PLD_LEDCR               (PLD_BASE_ADDR + 0x08)
+#define PLD_SWSR                (PLD_BASE_ADDR + 0x0a)
+#define PLD_VERSR               (PLD_BASE_ADDR + 0x0c)
+#define PLD_MMSR                (PLD_BASE_ADDR + 0x0e)
+
+#define SM107_MEM_ADDR          0x10000000
+#define SM107_MEM_SIZE          0x00e00000
+#define SM107_REG_ADDR          0x13e00000
+#define SM107_REG_SIZE          0x00200000
+
+#if defined(CONFIG_SH_SH7785LCR_29BIT_PHYSMAPS)
+#define R8A66597_ADDR           0x14000000      /* USB */
+#define CG200_ADDR              0x18000000      /* SD */
+#define PCA9564_ADDR            0x06000000      /* I2C */
+#else
+#define R8A66597_ADDR           0x08000000
+#define CG200_ADDR              0x0c000000
+#define PCA9564_ADDR            0x14000000
+#endif
+
+#define R8A66597_SIZE           0x00000100
+#define CG200_SIZE              0x00010000
+#define PCA9564_SIZE            0x00000100
+
+#endif  /* __ASM_SH_RENESAS_SH7785LCR_H */
+
diff --git a/include/asm-sh/sh_bios.h b/arch/sh/include/asm/sh_bios.h
index 0ca261956e3d..0ca261956e3d 100644
--- a/include/asm-sh/sh_bios.h
+++ b/arch/sh/include/asm/sh_bios.h
diff --git a/include/asm-sh/sh_keysc.h b/arch/sh/include/asm/sh_keysc.h
index b5a4dd5a9729..b5a4dd5a9729 100644
--- a/include/asm-sh/sh_keysc.h
+++ b/arch/sh/include/asm/sh_keysc.h
diff --git a/include/asm-sh/sh_mobile_lcdc.h b/arch/sh/include/asm/sh_mobile_lcdc.h
index 27677727df4d..27677727df4d 100644
--- a/include/asm-sh/sh_mobile_lcdc.h
+++ b/arch/sh/include/asm/sh_mobile_lcdc.h
diff --git a/include/asm-sh/shmbuf.h b/arch/sh/include/asm/shmbuf.h
index b2101f490521..b2101f490521 100644
--- a/include/asm-sh/shmbuf.h
+++ b/arch/sh/include/asm/shmbuf.h
diff --git a/include/asm-sh/shmin.h b/arch/sh/include/asm/shmin.h
index 36ba138a81fb..36ba138a81fb 100644
--- a/include/asm-sh/shmin.h
+++ b/arch/sh/include/asm/shmin.h
diff --git a/include/asm-sh/shmparam.h b/arch/sh/include/asm/shmparam.h
index ba1758d90106..ba1758d90106 100644
--- a/include/asm-sh/shmparam.h
+++ b/arch/sh/include/asm/shmparam.h
diff --git a/include/asm-sh/sigcontext.h b/arch/sh/include/asm/sigcontext.h
index 8ce1435bc0bf..8ce1435bc0bf 100644
--- a/include/asm-sh/sigcontext.h
+++ b/arch/sh/include/asm/sigcontext.h
diff --git a/include/asm-sh/siginfo.h b/arch/sh/include/asm/siginfo.h
index 813040ed68a9..813040ed68a9 100644
--- a/include/asm-sh/siginfo.h
+++ b/arch/sh/include/asm/siginfo.h
diff --git a/include/asm-sh/signal.h b/arch/sh/include/asm/signal.h
index 5c5c1e852089..5c5c1e852089 100644
--- a/include/asm-sh/signal.h
+++ b/arch/sh/include/asm/signal.h
diff --git a/include/asm-sh/smc37c93x.h b/arch/sh/include/asm/smc37c93x.h
index 585da2a8fc45..585da2a8fc45 100644
--- a/include/asm-sh/smc37c93x.h
+++ b/arch/sh/include/asm/smc37c93x.h
diff --git a/include/asm-sh/smp.h b/arch/sh/include/asm/smp.h
index 593343cd26ee..593343cd26ee 100644
--- a/include/asm-sh/smp.h
+++ b/arch/sh/include/asm/smp.h
diff --git a/include/asm-sh/snapgear.h b/arch/sh/include/asm/snapgear.h
index 042d95f51c4d..042d95f51c4d 100644
--- a/include/asm-sh/snapgear.h
+++ b/arch/sh/include/asm/snapgear.h
diff --git a/include/asm-sh/socket.h b/arch/sh/include/asm/socket.h
index 6d4bf6512959..6d4bf6512959 100644
--- a/include/asm-sh/socket.h
+++ b/arch/sh/include/asm/socket.h
diff --git a/include/asm-sh/sockios.h b/arch/sh/include/asm/sockios.h
index cf8b96b1f9ab..cf8b96b1f9ab 100644
--- a/include/asm-sh/sockios.h
+++ b/arch/sh/include/asm/sockios.h
diff --git a/include/asm-sh/sparsemem.h b/arch/sh/include/asm/sparsemem.h
index 547a540b6667..547a540b6667 100644
--- a/include/asm-sh/sparsemem.h
+++ b/arch/sh/include/asm/sparsemem.h
diff --git a/include/asm-sh/spi.h b/arch/sh/include/asm/spi.h
index e96f5b0953c8..e96f5b0953c8 100644
--- a/include/asm-sh/spi.h
+++ b/arch/sh/include/asm/spi.h
diff --git a/include/asm-sh/spinlock.h b/arch/sh/include/asm/spinlock.h
index e793181d64da..e793181d64da 100644
--- a/include/asm-sh/spinlock.h
+++ b/arch/sh/include/asm/spinlock.h
diff --git a/include/asm-sh/spinlock_types.h b/arch/sh/include/asm/spinlock_types.h
index b4d244e7b60c..b4d244e7b60c 100644
--- a/include/asm-sh/spinlock_types.h
+++ b/arch/sh/include/asm/spinlock_types.h
diff --git a/include/asm-sh/stat.h b/arch/sh/include/asm/stat.h
index e1810cc6e3da..e1810cc6e3da 100644
--- a/include/asm-sh/stat.h
+++ b/arch/sh/include/asm/stat.h
diff --git a/include/asm-sh/statfs.h b/arch/sh/include/asm/statfs.h
index 9202a023328f..9202a023328f 100644
--- a/include/asm-sh/statfs.h
+++ b/arch/sh/include/asm/statfs.h
diff --git a/include/asm-sh/string.h b/arch/sh/include/asm/string.h
index 8c1ea21dc0ae..8c1ea21dc0ae 100644
--- a/include/asm-sh/string.h
+++ b/arch/sh/include/asm/string.h
diff --git a/include/asm-sh/string_32.h b/arch/sh/include/asm/string_32.h
index 55f8db6bc1d7..55f8db6bc1d7 100644
--- a/include/asm-sh/string_32.h
+++ b/arch/sh/include/asm/string_32.h
diff --git a/include/asm-sh/string_64.h b/arch/sh/include/asm/string_64.h
index aa1fef229c78..aa1fef229c78 100644
--- a/include/asm-sh/string_64.h
+++ b/arch/sh/include/asm/string_64.h
diff --git a/arch/sh/include/asm/system.h b/arch/sh/include/asm/system.h
new file mode 100644
index 000000000000..056d68cd2108
--- /dev/null
+++ b/arch/sh/include/asm/system.h
@@ -0,0 +1,190 @@
+#ifndef __ASM_SH_SYSTEM_H
+#define __ASM_SH_SYSTEM_H
+
+/*
+ * Copyright (C) 1999, 2000  Niibe Yutaka  &  Kaz Kojima
+ * Copyright (C) 2002 Paul Mundt
+ */
+
+#include <linux/irqflags.h>
+#include <linux/compiler.h>
+#include <linux/linkage.h>
+#include <asm/types.h>
+#include <asm/ptrace.h>
+
+#define AT_VECTOR_SIZE_ARCH 5 /* entries in ARCH_DLINFO */
+
+#if defined(CONFIG_CPU_SH4A) || defined(CONFIG_CPU_SH5)
+#define __icbi()                        \
+{                                       \
+        unsigned long __addr;           \
+        __addr = 0xa8000000;            \
+        __asm__ __volatile__(           \
+                "icbi   %0\n\t"         \
+                : /* no output */       \
+                : "m" (__m(__addr)));   \
+}
+#endif
+
+/*
+ * A brief note on ctrl_barrier(), the control register write barrier.
+ *
+ * Legacy SH cores typically require a sequence of 8 nops after
+ * modification of a control register in order for the changes to take
+ * effect. On newer cores (like the sh4a and sh5) this is accomplished
+ * with icbi.
+ *
+ * Also note that on sh4a in the icbi case we can forego a synco for the
+ * write barrier, as it's not necessary for control registers.
+ *
+ * Historically we have only done this type of barrier for the MMUCR, but
+ * it's also necessary for the CCR, so we make it generic here instead.
+ */
+#if defined(CONFIG_CPU_SH4A) || defined(CONFIG_CPU_SH5)
+#define mb()            __asm__ __volatile__ ("synco": : :"memory")
+#define rmb()           mb()
+#define wmb()           __asm__ __volatile__ ("synco": : :"memory")
+#define ctrl_barrier()  __icbi()
+#define read_barrier_depends()  do { } while(0)
+#else
+#define mb()            __asm__ __volatile__ ("": : :"memory")
+#define rmb()           mb()
+#define wmb()           __asm__ __volatile__ ("": : :"memory")
+#define ctrl_barrier()  __asm__ __volatile__ ("nop;nop;nop;nop;nop;nop;nop;nop")
+#define read_barrier_depends()  do { } while(0)
+#endif
+
+#ifdef CONFIG_SMP
+#define smp_mb()        mb()
+#define smp_rmb()       rmb()
+#define smp_wmb()       wmb()
+#define smp_read_barrier_depends()      read_barrier_depends()
+#else
+#define smp_mb()        barrier()
+#define smp_rmb()       barrier()
+#define smp_wmb()       barrier()
+#define smp_read_barrier_depends()      do { } while(0)
+#endif
+
+#define set_mb(var, value) do { (void)xchg(&var, value); } while (0)
+
+#ifdef CONFIG_GUSA_RB
+#include <asm/cmpxchg-grb.h>
+#else
+#include <asm/cmpxchg-irq.h>
+#endif
+
+extern void __xchg_called_with_bad_pointer(void);
+
+#define __xchg(ptr, x, size)                            \
+({                                                      \
+        unsigned long __xchg__res;                      \
+        volatile void *__xchg_ptr = (ptr);              \
+        switch (size) {                                 \
+        case 4:                                         \
+                __xchg__res = xchg_u32(__xchg_ptr, x);  \
+                break;                                  \
+        case 1:                                         \
+                __xchg__res = xchg_u8(__xchg_ptr, x);   \
+                break;                                  \
+        default:                                        \
+                __xchg_called_with_bad_pointer();       \
+                __xchg__res = x;                        \
+                break;                                  \
+        }                                               \
+                                                        \
+        __xchg__res;                                    \
+})
+
+#define xchg(ptr,x)     \
+        ((__typeof__(*(ptr)))__xchg((ptr),(unsigned long)(x), sizeof(*(ptr))))
+
+/* This function doesn't exist, so you'll get a linker error
+ * if something tries to do an invalid cmpxchg(). */
+extern void __cmpxchg_called_with_bad_pointer(void);
+
+#define __HAVE_ARCH_CMPXCHG 1
+
+static inline unsigned long __cmpxchg(volatile void * ptr, unsigned long old,
+                unsigned long new, int size)
+{
+        switch (size) {
+        case 4:
+                return __cmpxchg_u32(ptr, old, new);
+        }
+        __cmpxchg_called_with_bad_pointer();
+        return old;
+}
+
+#define cmpxchg(ptr,o,n)                                                 \
+  ({                                                                     \
+     __typeof__(*(ptr)) _o_ = (o);                                       \
+     __typeof__(*(ptr)) _n_ = (n);                                       \
+     (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_,           \
+                                    (unsigned long)_n_, sizeof(*(ptr))); \
+  })
+
+extern void die(const char *str, struct pt_regs *regs, long err) __attribute__ ((noreturn));
+
+extern void *set_exception_table_vec(unsigned int vec, void *handler);
+
+static inline void *set_exception_table_evt(unsigned int evt, void *handler)
+{
+        return set_exception_table_vec(evt >> 5, handler);
+}
+
+/*
+ * SH-2A has both 16 and 32-bit opcodes, do lame encoding checks.
+ */
+#ifdef CONFIG_CPU_SH2A
+extern unsigned int instruction_size(unsigned int insn);
+#elif defined(CONFIG_SUPERH32)
+#define instruction_size(insn)  (2)
+#else
+#define instruction_size(insn)  (4)
+#endif
+
+extern unsigned long cached_to_uncached;
+
+extern struct dentry *sh_debugfs_root;
+
+void per_cpu_trap_init(void);
+
+asmlinkage void break_point_trap(void);
+
+#ifdef CONFIG_SUPERH32
+#define BUILD_TRAP_HANDLER(name)                                        \
+asmlinkage void name##_trap_handler(unsigned long r4, unsigned long r5, \
+                                    unsigned long r6, unsigned long r7, \
+                                    struct pt_regs __regs)
+
+#define TRAP_HANDLER_DECL                               \
+        struct pt_regs *regs = RELOC_HIDE(&__regs, 0);  \
+        unsigned int vec = regs->tra;                   \
+        (void)vec;
+#else
+#define BUILD_TRAP_HANDLER(name)        \
+asmlinkage void name##_trap_handler(unsigned int vec, struct pt_regs *regs)
+#define TRAP_HANDLER_DECL
+#endif
+
+BUILD_TRAP_HANDLER(address_error);
+BUILD_TRAP_HANDLER(debug);
+BUILD_TRAP_HANDLER(bug);
+BUILD_TRAP_HANDLER(fpu_error);
+BUILD_TRAP_HANDLER(fpu_state_restore);
+
+#define arch_align_stack(x) (x)
+
+struct mem_access {
+        unsigned long (*from)(void *dst, const void *src, unsigned long cnt);
+        unsigned long (*to)(void *dst, const void *src, unsigned long cnt);
+};
+
+#ifdef CONFIG_SUPERH32
+# include "system_32.h"
+#else
+# include "system_64.h"
+#endif
+
+#endif
diff --git a/include/asm-sh/system_32.h b/arch/sh/include/asm/system_32.h
index f11bcf0855ed..f11bcf0855ed 100644
--- a/include/asm-sh/system_32.h
+++ b/arch/sh/include/asm/system_32.h
diff --git a/include/asm-sh/system_64.h b/arch/sh/include/asm/system_64.h
index 943acf5ea07c..943acf5ea07c 100644
--- a/include/asm-sh/system_64.h
+++ b/arch/sh/include/asm/system_64.h
diff --git a/include/asm-sh/systemh7751.h b/arch/sh/include/asm/systemh7751.h
index 4161122c84ef..4161122c84ef 100644
--- a/include/asm-sh/systemh7751.h
+++ b/arch/sh/include/asm/systemh7751.h
diff --git a/include/asm-sh/termbits.h b/arch/sh/include/asm/termbits.h
index 77db116948cf..77db116948cf 100644
--- a/include/asm-sh/termbits.h
+++ b/arch/sh/include/asm/termbits.h
diff --git a/include/asm-sh/termios.h b/arch/sh/include/asm/termios.h
index 0a8c793c76f2..0a8c793c76f2 100644
--- a/include/asm-sh/termios.h
+++ b/arch/sh/include/asm/termios.h
diff --git a/arch/sh/include/asm/thread_info.h b/arch/sh/include/asm/thread_info.h
new file mode 100644
index 000000000000..eeb4c747119e
--- /dev/null
+++ b/arch/sh/include/asm/thread_info.h
@@ -0,0 +1,141 @@
+#ifndef __ASM_SH_THREAD_INFO_H
+#define __ASM_SH_THREAD_INFO_H
+
+/* SuperH version
+ * Copyright (C) 2002  Niibe Yutaka
+ *
+ * The copyright of original i386 version is:
+ *
+ *  Copyright (C) 2002  David Howells (dhowells@redhat.com)
+ *  - Incorporating suggestions made by Linus Torvalds and Dave Miller
+ */
+#ifdef __KERNEL__
+#include <asm/page.h>
+
+#ifndef __ASSEMBLY__
+#include <asm/processor.h>
+
+struct thread_info {
+        struct task_struct      *task;          /* main task structure */
+        struct exec_domain      *exec_domain;   /* execution domain */
+        unsigned long           flags;          /* low level flags */
+        __u32                   cpu;
+        int                     preempt_count; /* 0 => preemptable, <0 => BUG */
+        mm_segment_t            addr_limit;     /* thread address space */
+        struct restart_block    restart_block;
+        unsigned long           previous_sp;    /* sp of previous stack in case
+                                                   of nested IRQ stacks */
+        __u8                    supervisor_stack[0];
+};
+
+#endif
+
+#define PREEMPT_ACTIVE          0x10000000
+
+#if defined(CONFIG_4KSTACKS)
+#define THREAD_SIZE_ORDER       (0)
+#elif defined(CONFIG_PAGE_SIZE_4KB)
+#define THREAD_SIZE_ORDER       (1)
+#elif defined(CONFIG_PAGE_SIZE_8KB)
+#define THREAD_SIZE_ORDER       (1)
+#elif defined(CONFIG_PAGE_SIZE_16KB)
+#define THREAD_SIZE_ORDER       (0)
+#elif defined(CONFIG_PAGE_SIZE_64KB)
+#define THREAD_SIZE_ORDER       (0)
+#else
+#error "Unknown thread size"
+#endif
+
+#define THREAD_SIZE     (PAGE_SIZE << THREAD_SIZE_ORDER)
+#define STACK_WARN      (THREAD_SIZE >> 3)
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ */
+#ifndef __ASSEMBLY__
+#define INIT_THREAD_INFO(tsk)                   \
+{                                               \
+        .task           = &tsk,                 \
+        .exec_domain    = &default_exec_domain, \
+        .flags          = 0,                    \
+        .cpu            = 0,                    \
+        .preempt_count  = 1,                    \
+        .addr_limit     = KERNEL_DS,            \
+        .restart_block  = {                     \
+                .fn = do_no_restart_syscall,    \
+        },                                      \
+}
+
+#define init_thread_info        (init_thread_union.thread_info)
+#define init_stack              (init_thread_union.stack)
+
+/* how to get the current stack pointer from C */
+register unsigned long current_stack_pointer asm("r15") __used;
+
+/* how to get the thread information struct from C */
+static inline struct thread_info *current_thread_info(void)
+{
+        struct thread_info *ti;
+#if defined(CONFIG_SUPERH64)
+        __asm__ __volatile__ ("getcon   cr17, %0" : "=r" (ti));
+#elif defined(CONFIG_CPU_HAS_SR_RB)
+        __asm__ __volatile__ ("stc      r7_bank, %0" : "=r" (ti));
+#else
+        unsigned long __dummy;
+
+        __asm__ __volatile__ (
+                "mov    r15, %0\n\t"
+                "and    %1, %0\n\t"
+                : "=&r" (ti), "=r" (__dummy)
+                : "1" (~(THREAD_SIZE - 1))
+                : "memory");
+#endif
+
+        return ti;
+}
+
+#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+
+/* thread information allocation */
+#ifdef CONFIG_DEBUG_STACK_USAGE
+#define alloc_thread_info(ti)   kzalloc(THREAD_SIZE, GFP_KERNEL)
+#else
+#define alloc_thread_info(ti)   kmalloc(THREAD_SIZE, GFP_KERNEL)
+#endif
+#define free_thread_info(ti)    kfree(ti)
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * thread information flags
+ * - these are process state flags that various assembly files may need to access
+ * - pending work-to-be-done flags are in LSW
+ * - other flags in MSW
+ */
+#define TIF_SYSCALL_TRACE       0       /* syscall trace active */
+#define TIF_SIGPENDING          1       /* signal pending */
+#define TIF_NEED_RESCHED        2       /* rescheduling necessary */
+#define TIF_RESTORE_SIGMASK     3       /* restore signal mask in do_signal() */
+#define TIF_SINGLESTEP          4       /* singlestepping active */
+#define TIF_SYSCALL_AUDIT       5
+#define TIF_USEDFPU             16      /* FPU was used by this task this quantum (SMP) */
+#define TIF_POLLING_NRFLAG      17      /* true if poll_idle() is polling TIF_NEED_RESCHED */
+#define TIF_MEMDIE              18
+#define TIF_FREEZE              19
+
+#define _TIF_SYSCALL_TRACE      (1<<TIF_SYSCALL_TRACE)
+#define _TIF_SIGPENDING         (1<<TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED       (1<<TIF_NEED_RESCHED)
+#define _TIF_RESTORE_SIGMASK    (1<<TIF_RESTORE_SIGMASK)
+#define _TIF_SINGLESTEP         (1<<TIF_SINGLESTEP)
+#define _TIF_SYSCALL_AUDIT              (1<<TIF_SYSCALL_AUDIT)
+#define _TIF_USEDFPU            (1<<TIF_USEDFPU)
+#define _TIF_POLLING_NRFLAG     (1<<TIF_POLLING_NRFLAG)
+#define _TIF_FREEZE             (1<<TIF_FREEZE)
+
+#define _TIF_WORK_MASK          0x000000FE      /* work to do on interrupt/exception return */
+#define _TIF_ALLWORK_MASK       0x000000FF      /* work to do on any return to u-space */
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_SH_THREAD_INFO_H */
diff --git a/arch/sh/include/asm/timer.h b/arch/sh/include/asm/timer.h
new file mode 100644
index 000000000000..a7ca3a195bb5
--- /dev/null
+++ b/arch/sh/include/asm/timer.h
@@ -0,0 +1,44 @@
+#ifndef __ASM_SH_TIMER_H
+#define __ASM_SH_TIMER_H
+
+#include <linux/sysdev.h>
+#include <linux/clocksource.h>
+#include <cpu/timer.h>
+
+struct sys_timer_ops {
+        int (*init)(void);
+        int (*start)(void);
+        int (*stop)(void);
+        cycle_t (*read)(void);
+#ifndef CONFIG_GENERIC_TIME
+        unsigned long (*get_offset)(void);
+#endif
+};
+
+struct sys_timer {
+        const char              *name;
+
+        struct sys_device       dev;
+        struct sys_timer_ops    *ops;
+};
+
+#define TICK_SIZE (tick_nsec / 1000)
+
+extern struct sys_timer tmu_timer, cmt_timer, mtu2_timer;
+extern struct sys_timer *sys_timer;
+
+#ifndef CONFIG_GENERIC_TIME
+static inline unsigned long get_timer_offset(void)
+{
+        return sys_timer->ops->get_offset();
+}
+#endif
+
+/* arch/sh/kernel/timers/timer.c */
+struct sys_timer *get_sys_timer(void);
+
+/* arch/sh/kernel/time.c */
+void handle_timer_tick(void);
+extern unsigned long sh_hpt_frequency;
+
+#endif /* __ASM_SH_TIMER_H */
diff --git a/include/asm-sh/timex.h b/arch/sh/include/asm/timex.h
index a873e24113cf..a873e24113cf 100644
--- a/include/asm-sh/timex.h
+++ b/arch/sh/include/asm/timex.h
diff --git a/include/asm-sh/titan.h b/arch/sh/include/asm/titan.h
index 03f3583c8918..03f3583c8918 100644
--- a/include/asm-sh/titan.h
+++ b/arch/sh/include/asm/titan.h
diff --git a/include/asm-sh/tlb.h b/arch/sh/include/asm/tlb.h
index 88ff1ae8a6b8..88ff1ae8a6b8 100644
--- a/include/asm-sh/tlb.h
+++ b/arch/sh/include/asm/tlb.h
diff --git a/include/asm-sh/tlb_64.h b/arch/sh/include/asm/tlb_64.h
index 0a96f3af69e3..0a96f3af69e3 100644
--- a/include/asm-sh/tlb_64.h
+++ b/arch/sh/include/asm/tlb_64.h
diff --git a/include/asm-sh/tlbflush.h b/arch/sh/include/asm/tlbflush.h
index e0ac97221ae6..e0ac97221ae6 100644
--- a/include/asm-sh/tlbflush.h
+++ b/arch/sh/include/asm/tlbflush.h
diff --git a/include/asm-sh/topology.h b/arch/sh/include/asm/topology.h
index 95f0085e098a..95f0085e098a 100644
--- a/include/asm-sh/topology.h
+++ b/arch/sh/include/asm/topology.h
diff --git a/include/asm-sh/types.h b/arch/sh/include/asm/types.h
index beea4e6f8dfd..beea4e6f8dfd 100644
--- a/include/asm-sh/types.h
+++ b/arch/sh/include/asm/types.h
diff --git a/arch/sh/include/asm/uaccess.h b/arch/sh/include/asm/uaccess.h
new file mode 100644
index 000000000000..075848f43b6a
--- /dev/null
+++ b/arch/sh/include/asm/uaccess.h
@@ -0,0 +1,258 @@
+#ifndef __ASM_SH_UACCESS_H
+#define __ASM_SH_UACCESS_H
+
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <asm/segment.h>
+
+#define VERIFY_READ    0
+#define VERIFY_WRITE   1
+
+#define __addr_ok(addr) \
+        ((unsigned long __force)(addr) < current_thread_info()->addr_limit.seg)
+
+/*
+ * __access_ok: Check if address with size is OK or not.
+ *
+ * Uhhuh, this needs 33-bit arithmetic. We have a carry..
+ *
+ * sum := addr + size;  carry? --> flag = true;
+ * if (sum >= addr_limit) flag = true;
+ */
+#define __access_ok(addr, size)         \
+        (__addr_ok((addr) + (size)))
+#define access_ok(type, addr, size)     \
+        (__chk_user_ptr(addr),          \
+         __access_ok((unsigned long __force)(addr), (size)))
+
+/*
+ * Uh, these should become the main single-value transfer routines ...
+ * They automatically use the right size if we just have the right
+ * pointer type ...
+ *
+ * As SuperH uses the same address space for kernel and user data, we
+ * can just do these as direct assignments.
+ *
+ * Careful to not
+ * (a) re-use the arguments for side effects (sizeof is ok)
+ * (b) require any knowledge of processes at this stage
+ */
+#define put_user(x,ptr)         __put_user_check((x), (ptr), sizeof(*(ptr)))
+#define get_user(x,ptr)         __get_user_check((x), (ptr), sizeof(*(ptr)))
+
+/*
+ * The "__xxx" versions do not do address space checking, useful when
+ * doing multiple accesses to the same area (the user has to do the
+ * checks by hand with "access_ok()")
+ */
+#define __put_user(x,ptr)       __put_user_nocheck((x), (ptr), sizeof(*(ptr)))
+#define __get_user(x,ptr)       __get_user_nocheck((x), (ptr), sizeof(*(ptr)))
+
+struct __large_struct { unsigned long buf[100]; };
+#define __m(x) (*(struct __large_struct __user *)(x))
+
+#define __get_user_nocheck(x,ptr,size)                          \
+({                                                              \
+        long __gu_err;                                          \
+        unsigned long __gu_val;                                 \
+        const __typeof__(*(ptr)) __user *__gu_addr = (ptr);     \
+        __chk_user_ptr(ptr);                                    \
+        __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \
+        (x) = (__typeof__(*(ptr)))__gu_val;                     \
+        __gu_err;                                               \
+})
+
+#define __get_user_check(x,ptr,size)                                    \
+({                                                                      \
+        long __gu_err = -EFAULT;                                        \
+        unsigned long __gu_val = 0;                                     \
+        const __typeof__(*(ptr)) *__gu_addr = (ptr);                    \
+        if (likely(access_ok(VERIFY_READ, __gu_addr, (size))))          \
+                __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \
+        (x) = (__typeof__(*(ptr)))__gu_val;                             \
+        __gu_err;                                                       \
+})
+
+#define __put_user_nocheck(x,ptr,size)                          \
+({                                                              \
+        long __pu_err;                                          \
+        __typeof__(*(ptr)) __user *__pu_addr = (ptr);           \
+        __typeof__(*(ptr)) __pu_val = x;                        \
+        __chk_user_ptr(ptr);                                    \
+        __put_user_size(__pu_val, __pu_addr, (size), __pu_err); \
+        __pu_err;                                               \
+})
+
+#define __put_user_check(x,ptr,size)                            \
+({                                                              \
+        long __pu_err = -EFAULT;                                \
+        __typeof__(*(ptr)) __user *__pu_addr = (ptr);           \
+        __typeof__(*(ptr)) __pu_val = x;                        \
+        if (likely(access_ok(VERIFY_WRITE, __pu_addr, size)))   \
+                __put_user_size(__pu_val, __pu_addr, (size),    \
+                                __pu_err);                      \
+        __pu_err;                                               \
+})
+
+#ifdef CONFIG_SUPERH32
+# include "uaccess_32.h"
+#else
+# include "uaccess_64.h"
+#endif
+
+/* Generic arbitrary sized copy.  */
+/* Return the number of bytes NOT copied */
+__kernel_size_t __copy_user(void *to, const void *from, __kernel_size_t n);
+
+static __always_inline unsigned long
+__copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+        return __copy_user(to, (__force void *)from, n);
+}
+
+static __always_inline unsigned long __must_check
+__copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+        return __copy_user((__force void *)to, from, n);
+}
+
+#define __copy_to_user_inatomic __copy_to_user
+#define __copy_from_user_inatomic __copy_from_user
+
+/*
+ * Clear the area and return remaining number of bytes
+ * (on failure.  Usually it's 0.)
+ */
+__kernel_size_t __clear_user(void *addr, __kernel_size_t size);
+
+#define clear_user(addr,n)                                              \
+({                                                                      \
+        void __user * __cl_addr = (addr);                               \
+        unsigned long __cl_size = (n);                                  \
+                                                                        \
+        if (__cl_size && access_ok(VERIFY_WRITE,                        \
+                ((unsigned long)(__cl_addr)), __cl_size))               \
+                __cl_size = __clear_user(__cl_addr, __cl_size);         \
+                                                                        \
+        __cl_size;                                                      \
+})
+
+/**
+ * strncpy_from_user: - Copy a NUL terminated string from userspace.
+ * @dst:   Destination address, in kernel space.  This buffer must be at
+ *         least @count bytes long.
+ * @src:   Source address, in user space.
+ * @count: Maximum number of bytes to copy, including the trailing NUL.
+ *
+ * Copies a NUL-terminated string from userspace to kernel space.
+ *
+ * On success, returns the length of the string (not including the trailing
+ * NUL).
+ *
+ * If access to userspace fails, returns -EFAULT (some data may have been
+ * copied).
+ *
+ * If @count is smaller than the length of the string, copies @count bytes
+ * and returns @count.
+ */
+#define strncpy_from_user(dest,src,count)                               \
+({                                                                      \
+        unsigned long __sfu_src = (unsigned long)(src);                 \
+        int __sfu_count = (int)(count);                                 \
+        long __sfu_res = -EFAULT;                                       \
+                                                                        \
+        if (__access_ok(__sfu_src, __sfu_count))                        \
+                __sfu_res = __strncpy_from_user((unsigned long)(dest),  \
+                                __sfu_src, __sfu_count);                \
+                                                                        \
+        __sfu_res;                                                      \
+})
+
+static inline unsigned long
+copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+        unsigned long __copy_from = (unsigned long) from;
+        __kernel_size_t __copy_size = (__kernel_size_t) n;
+
+        if (__copy_size && __access_ok(__copy_from, __copy_size))
+                return __copy_user(to, from, __copy_size);
+
+        return __copy_size;
+}
+
+static inline unsigned long
+copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+        unsigned long __copy_to = (unsigned long) to;
+        __kernel_size_t __copy_size = (__kernel_size_t) n;
+
+        if (__copy_size && __access_ok(__copy_to, __copy_size))
+                return __copy_user(to, from, __copy_size);
+
+        return __copy_size;
+}
+
+/**
+ * strnlen_user: - Get the size of a string in user space.
+ * @s: The string to measure.
+ * @n: The maximum valid length
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Get the size of a NUL-terminated string in user space.
+ *
+ * Returns the size of the string INCLUDING the terminating NUL.
+ * On exception, returns 0.
+ * If the string is too long, returns a value greater than @n.
+ */
+static inline long strnlen_user(const char __user *s, long n)
+{
+        if (!__addr_ok(s))
+                return 0;
+        else
+                return __strnlen_user(s, n);
+}
+
+/**
+ * strlen_user: - Get the size of a string in user space.
+ * @str: The string to measure.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Get the size of a NUL-terminated string in user space.
+ *
+ * Returns the size of the string INCLUDING the terminating NUL.
+ * On exception, returns 0.
+ *
+ * If there is a limit on the length of a valid string, you may wish to
+ * consider using strnlen_user() instead.
+ */
+#define strlen_user(str)        strnlen_user(str, ~0UL >> 1)
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue.  No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path.  This means when everything is well,
+ * we don't even have to jump over them.  Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+struct exception_table_entry {
+        unsigned long insn, fixup;
+};
+
+#if defined(CONFIG_SUPERH64) && defined(CONFIG_MMU)
+#define ARCH_HAS_SEARCH_EXTABLE
+#endif
+
+int fixup_exception(struct pt_regs *regs);
+/* Returns 0 if exception not found and fixup.unit otherwise.  */
+unsigned long search_exception_table(unsigned long addr);
+const struct exception_table_entry *search_exception_tables(unsigned long addr);
+
+
+#endif /* __ASM_SH_UACCESS_H */
diff --git a/arch/sh/include/asm/uaccess_32.h b/arch/sh/include/asm/uaccess_32.h
new file mode 100644
index 000000000000..ae0d24f6653f
--- /dev/null
+++ b/arch/sh/include/asm/uaccess_32.h
@@ -0,0 +1,248 @@
+/*
+ * User space memory access functions
+ *
+ * Copyright (C) 1999, 2002  Niibe Yutaka
+ * Copyright (C) 2003 - 2008  Paul Mundt
+ *
+ *  Based on:
+ *     MIPS implementation version 1.15 by
+ *              Copyright (C) 1996, 1997, 1998 by Ralf Baechle
+ *     and i386 version.
+ */
+#ifndef __ASM_SH_UACCESS_32_H
+#define __ASM_SH_UACCESS_32_H
+
+#define __get_user_size(x,ptr,size,retval)                      \
+do {                                                            \
+        retval = 0;                                             \
+        switch (size) {                                         \
+        case 1:                                                 \
+                __get_user_asm(x, ptr, retval, "b");            \
+                break;                                          \
+        case 2:                                                 \
+                __get_user_asm(x, ptr, retval, "w");            \
+                break;                                          \
+        case 4:                                                 \
+                __get_user_asm(x, ptr, retval, "l");            \
+                break;                                          \
+        default:                                                \
+                __get_user_unknown();                           \
+                break;                                          \
+        }                                                       \
+} while (0)
+
+#ifdef CONFIG_MMU
+#define __get_user_asm(x, addr, err, insn) \
+({ \
+__asm__ __volatile__( \
+        "1:\n\t" \
+        "mov." insn "   %2, %1\n\t" \
+        "2:\n" \
+        ".section       .fixup,\"ax\"\n" \
+        "3:\n\t" \
+        "mov    #0, %1\n\t" \
+        "mov.l  4f, %0\n\t" \
+        "jmp    @%0\n\t" \
+        " mov   %3, %0\n\t" \
+        ".balign        4\n" \
+        "4:     .long   2b\n\t" \
+        ".previous\n" \
+        ".section       __ex_table,\"a\"\n\t" \
+        ".long  1b, 3b\n\t" \
+        ".previous" \
+        :"=&r" (err), "=&r" (x) \
+        :"m" (__m(addr)), "i" (-EFAULT), "0" (err)); })
+#else
+#define __get_user_asm(x, addr, err, insn)              \
+do {                                                    \
+        __asm__ __volatile__ (                          \
+                "mov." insn "   %1, %0\n\t"             \
+                : "=&r" (x)                             \
+                : "m" (__m(addr))                       \
+        );                                              \
+} while (0)
+#endif /* CONFIG_MMU */
+
+extern void __get_user_unknown(void);
+
+#define __put_user_size(x,ptr,size,retval)              \
+do {                                                    \
+        retval = 0;                                     \
+        switch (size) {                                 \
+        case 1:                                         \
+                __put_user_asm(x, ptr, retval, "b");    \
+                break;                                  \
+        case 2:                                         \
+                __put_user_asm(x, ptr, retval, "w");    \
+                break;                                  \
+        case 4:                                         \
+                __put_user_asm(x, ptr, retval, "l");    \
+                break;                                  \
+        case 8:                                         \
+                __put_user_u64(x, ptr, retval);         \
+                break;                                  \
+        default:                                        \
+                __put_user_unknown();                   \
+        }                                               \
+} while (0)
+
+#ifdef CONFIG_MMU
+#define __put_user_asm(x, addr, err, insn)                      \
+do {                                                            \
+        __asm__ __volatile__ (                                  \
+                "1:\n\t"                                        \
+                "mov." insn "   %1, %2\n\t"                     \
+                "2:\n"                                          \
+                ".section       .fixup,\"ax\"\n"                \
+                "3:\n\t"                                        \
+                "mov.l  4f, %0\n\t"                             \
+                "jmp    @%0\n\t"                                \
+                " mov   %3, %0\n\t"                             \
+                ".balign        4\n"                            \
+                "4:     .long   2b\n\t"                         \
+                ".previous\n"                                   \
+                ".section       __ex_table,\"a\"\n\t"           \
+                ".long  1b, 3b\n\t"                             \
+                ".previous"                                     \
+                : "=&r" (err)                                   \
+                : "r" (x), "m" (__m(addr)), "i" (-EFAULT),      \
+                  "0" (err)                                     \
+                : "memory"                                      \
+        );                                                      \
+} while (0)
+#else
+#define __put_user_asm(x, addr, err, insn)              \
+do {                                                    \
+        __asm__ __volatile__ (                          \
+                "mov." insn "   %0, %1\n\t"             \
+                : /* no outputs */                      \
+                : "r" (x), "m" (__m(addr))              \
+                : "memory"                              \
+        );                                              \
+} while (0)
+#endif /* CONFIG_MMU */
+
+#if defined(CONFIG_CPU_LITTLE_ENDIAN)
+#define __put_user_u64(val,addr,retval) \
+({ \
+__asm__ __volatile__( \
+        "1:\n\t" \
+        "mov.l  %R1,%2\n\t" \
+        "mov.l  %S1,%T2\n\t" \
+        "2:\n" \
+        ".section       .fixup,\"ax\"\n" \
+        "3:\n\t" \
+        "mov.l  4f,%0\n\t" \
+        "jmp    @%0\n\t" \
+        " mov   %3,%0\n\t" \
+        ".balign        4\n" \
+        "4:     .long   2b\n\t" \
+        ".previous\n" \
+        ".section       __ex_table,\"a\"\n\t" \
+        ".long  1b, 3b\n\t" \
+        ".previous" \
+        : "=r" (retval) \
+        : "r" (val), "m" (__m(addr)), "i" (-EFAULT), "0" (retval) \
+        : "memory"); })
+#else
+#define __put_user_u64(val,addr,retval) \
+({ \
+__asm__ __volatile__( \
+        "1:\n\t" \
+        "mov.l  %S1,%2\n\t" \
+        "mov.l  %R1,%T2\n\t" \
+        "2:\n" \
+        ".section       .fixup,\"ax\"\n" \
+        "3:\n\t" \
+        "mov.l  4f,%0\n\t" \
+        "jmp    @%0\n\t" \
+        " mov   %3,%0\n\t" \
+        ".balign        4\n" \
+        "4:     .long   2b\n\t" \
+        ".previous\n" \
+        ".section       __ex_table,\"a\"\n\t" \
+        ".long  1b, 3b\n\t" \
+        ".previous" \
+        : "=r" (retval) \
+        : "r" (val), "m" (__m(addr)), "i" (-EFAULT), "0" (retval) \
+        : "memory"); })
+#endif
+
+extern void __put_user_unknown(void);
+
+static inline int
+__strncpy_from_user(unsigned long __dest, unsigned long __user __src, int __count)
+{
+        __kernel_size_t res;
+        unsigned long __dummy, _d, _s, _c;
+
+        __asm__ __volatile__(
+                "9:\n"
+                "mov.b  @%2+, %1\n\t"
+                "cmp/eq #0, %1\n\t"
+                "bt/s   2f\n"
+                "1:\n"
+                "mov.b  %1, @%3\n\t"
+                "dt     %4\n\t"
+                "bf/s   9b\n\t"
+                " add   #1, %3\n\t"
+                "2:\n\t"
+                "sub    %4, %0\n"
+                "3:\n"
+                ".section .fixup,\"ax\"\n"
+                "4:\n\t"
+                "mov.l  5f, %1\n\t"
+                "jmp    @%1\n\t"
+                " mov   %9, %0\n\t"
+                ".balign 4\n"
+                "5:     .long 3b\n"
+                ".previous\n"
+                ".section __ex_table,\"a\"\n"
+                "       .balign 4\n"
+                "       .long 9b,4b\n"
+                ".previous"
+                : "=r" (res), "=&z" (__dummy), "=r" (_s), "=r" (_d), "=r"(_c)
+                : "0" (__count), "2" (__src), "3" (__dest), "4" (__count),
+                  "i" (-EFAULT)
+                : "memory", "t");
+
+        return res;
+}
+
+/*
+ * Return the size of a string (including the ending 0 even when we have
+ * exceeded the maximum string length).
+ */
+static inline long __strnlen_user(const char __user *__s, long __n)
+{
+        unsigned long res;
+        unsigned long __dummy;
+
+        __asm__ __volatile__(
+                "1:\t"
+                "mov.b  @(%0,%3), %1\n\t"
+                "cmp/eq %4, %0\n\t"
+                "bt/s   2f\n\t"
+                " add   #1, %0\n\t"
+                "tst    %1, %1\n\t"
+                "bf     1b\n\t"
+                "2:\n"
+                ".section .fixup,\"ax\"\n"
+                "3:\n\t"
+                "mov.l  4f, %1\n\t"
+                "jmp    @%1\n\t"
+                " mov   #0, %0\n"
+                ".balign 4\n"
+                "4:     .long 2b\n"
+                ".previous\n"
+                ".section __ex_table,\"a\"\n"
+                "       .balign 4\n"
+                "       .long 1b,3b\n"
+                ".previous"
+                : "=z" (res), "=&r" (__dummy)
+                : "0" (0), "r" (__s), "r" (__n)
+                : "t");
+        return res;
+}
+
+#endif /* __ASM_SH_UACCESS_32_H */
diff --git a/arch/sh/include/asm/uaccess_64.h b/arch/sh/include/asm/uaccess_64.h
new file mode 100644
index 000000000000..81b3d515fcb3
--- /dev/null
+++ b/arch/sh/include/asm/uaccess_64.h
@@ -0,0 +1,79 @@
+#ifndef __ASM_SH_UACCESS_64_H
+#define __ASM_SH_UACCESS_64_H
+
+/*
+ * include/asm-sh/uaccess_64.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2003, 2004  Paul Mundt
+ *
+ * User space memory access functions
+ *
+ * Copyright (C) 1999  Niibe Yutaka
+ *
+ *  Based on:
+ *     MIPS implementation version 1.15 by
+ *              Copyright (C) 1996, 1997, 1998 by Ralf Baechle
+ *     and i386 version.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#define __get_user_size(x,ptr,size,retval)                      \
+do {                                                            \
+        retval = 0;                                             \
+        switch (size) {                                         \
+        case 1:                                                 \
+                retval = __get_user_asm_b(x, ptr);              \
+                break;                                          \
+        case 2:                                                 \
+                retval = __get_user_asm_w(x, ptr);              \
+                break;                                          \
+        case 4:                                                 \
+                retval = __get_user_asm_l(x, ptr);              \
+                break;                                          \
+        case 8:                                                 \
+                retval = __get_user_asm_q(x, ptr);              \
+                break;                                          \
+        default:                                                \
+                __get_user_unknown();                           \
+                break;                                          \
+        }                                                       \
+} while (0)
+
+extern long __get_user_asm_b(void *, long);
+extern long __get_user_asm_w(void *, long);
+extern long __get_user_asm_l(void *, long);
+extern long __get_user_asm_q(void *, long);
+extern void __get_user_unknown(void);
+
+#define __put_user_size(x,ptr,size,retval)                      \
+do {                                                            \
+        retval = 0;                                             \
+        switch (size) {                                         \
+        case 1:                                                 \
+                retval = __put_user_asm_b(x, ptr);              \
+                break;                                          \
+        case 2:                                                 \
+                retval = __put_user_asm_w(x, ptr);              \
+                break;                                          \
+        case 4:                                                 \
+                retval = __put_user_asm_l(x, ptr);              \
+                break;                                          \
+        case 8:                                                 \
+                retval = __put_user_asm_q(x, ptr);              \
+                break;                                          \
+        default:                                                \
+                __put_user_unknown();                           \
+        }                                                       \
+} while (0)
+
+extern long __put_user_asm_b(void *, long);
+extern long __put_user_asm_w(void *, long);
+extern long __put_user_asm_l(void *, long);
+extern long __put_user_asm_q(void *, long);
+extern void __put_user_unknown(void);
+
+#endif /* __ASM_SH_UACCESS_64_H */
diff --git a/arch/sh/include/asm/ubc.h b/arch/sh/include/asm/ubc.h
new file mode 100644
index 000000000000..a7b9028bbfbb
--- /dev/null
+++ b/arch/sh/include/asm/ubc.h
@@ -0,0 +1,64 @@
+/*
+ * include/asm-sh/ubc.h
+ *
+ * Copyright (C) 1999 Niibe Yutaka
+ * Copyright (C) 2002, 2003 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_SH_UBC_H
+#define __ASM_SH_UBC_H
+#ifdef __KERNEL__
+
+#include <cpu/ubc.h>
+
+/* User Break Controller */
+#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709)
+#define UBC_TYPE_SH7729 (current_cpu_data.type == CPU_SH7729)
+#else
+#define UBC_TYPE_SH7729 0
+#endif
+
+#define BAMR_ASID               (1 << 2)
+#define BAMR_NONE               0
+#define BAMR_10                 0x1
+#define BAMR_12                 0x2
+#define BAMR_ALL                0x3
+#define BAMR_16                 0x8
+#define BAMR_20                 0x9
+
+#define BBR_INST                (1 << 4)
+#define BBR_DATA                (2 << 4)
+#define BBR_READ                (1 << 2)
+#define BBR_WRITE               (2 << 2)
+#define BBR_BYTE                0x1
+#define BBR_HALF                0x2
+#define BBR_LONG                0x3
+#define BBR_QUAD                (1 << 6)        /* SH7750 */
+#define BBR_CPU                 (1 << 6)        /* SH7709A,SH7729 */
+#define BBR_DMA                 (2 << 6)        /* SH7709A,SH7729 */
+
+#define BRCR_CMFA               (1 << 15)
+#define BRCR_CMFB               (1 << 14)
+#define BRCR_PCTE               (1 << 11)
+#define BRCR_PCBA               (1 << 10)       /* 1: after execution */
+#define BRCR_DBEB               (1 << 7)
+#define BRCR_PCBB               (1 << 6)
+#define BRCR_SEQ                (1 << 3)
+#define BRCR_UBDE               (1 << 0)
+
+#ifndef __ASSEMBLY__
+/* arch/sh/kernel/cpu/ubc.S */
+extern void ubc_sleep(void);
+
+#ifdef CONFIG_UBC_WAKEUP
+extern void ubc_wakeup(void);
+#else
+#define ubc_wakeup()    do { } while (0)
+#endif
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_UBC_H */
diff --git a/include/asm-sh/ucontext.h b/arch/sh/include/asm/ucontext.h
index 202ef1d5a3c4..202ef1d5a3c4 100644
--- a/include/asm-sh/ucontext.h
+++ b/arch/sh/include/asm/ucontext.h
diff --git a/include/asm-sh/unaligned.h b/arch/sh/include/asm/unaligned.h
index c1641a01d50f..c1641a01d50f 100644
--- a/include/asm-sh/unaligned.h
+++ b/arch/sh/include/asm/unaligned.h
diff --git a/arch/sh/include/asm/unistd.h b/arch/sh/include/asm/unistd.h
new file mode 100644
index 000000000000..65be656ead7d
--- /dev/null
+++ b/arch/sh/include/asm/unistd.h
@@ -0,0 +1,13 @@
+#ifdef __KERNEL__
+# ifdef CONFIG_SUPERH32
+#  include "unistd_32.h"
+# else
+#  include "unistd_64.h"
+# endif
+#else
+# ifdef __SH5__
+#  include "unistd_64.h"
+# else
+#  include "unistd_32.h"
+# endif
+#endif
diff --git a/arch/sh/include/asm/unistd_32.h b/arch/sh/include/asm/unistd_32.h
new file mode 100644
index 000000000000..d52c000cf924
--- /dev/null
+++ b/arch/sh/include/asm/unistd_32.h
@@ -0,0 +1,384 @@
+#ifndef __ASM_SH_UNISTD_H
+#define __ASM_SH_UNISTD_H
+
+/*
+ * Copyright (C) 1999  Niibe Yutaka
+ */
+
+/*
+ * This file contains the system call numbers.
+ */
+
+#define __NR_restart_syscall      0
+#define __NR_exit                 1
+#define __NR_fork                 2
+#define __NR_read                 3
+#define __NR_write                4
+#define __NR_open                 5
+#define __NR_close                6
+#define __NR_waitpid              7
+#define __NR_creat                8
+#define __NR_link                 9
+#define __NR_unlink              10
+#define __NR_execve              11
+#define __NR_chdir               12
+#define __NR_time                13
+#define __NR_mknod               14
+#define __NR_chmod               15
+#define __NR_lchown              16
+#define __NR_break               17
+#define __NR_oldstat             18
+#define __NR_lseek               19
+#define __NR_getpid              20
+#define __NR_mount               21
+#define __NR_umount              22
+#define __NR_setuid              23
+#define __NR_getuid              24
+#define __NR_stime               25
+#define __NR_ptrace              26
+#define __NR_alarm               27
+#define __NR_oldfstat            28
+#define __NR_pause               29
+#define __NR_utime               30
+#define __NR_stty                31
+#define __NR_gtty                32
+#define __NR_access              33
+#define __NR_nice                34
+#define __NR_ftime               35
+#define __NR_sync                36
+#define __NR_kill                37
+#define __NR_rename              38
+#define __NR_mkdir               39
+#define __NR_rmdir               40
+#define __NR_dup                 41
+#define __NR_pipe                42
+#define __NR_times               43
+#define __NR_prof                44
+#define __NR_brk                 45
+#define __NR_setgid              46
+#define __NR_getgid              47
+#define __NR_signal              48
+#define __NR_geteuid             49
+#define __NR_getegid             50
+#define __NR_acct                51
+#define __NR_umount2             52
+#define __NR_lock                53
+#define __NR_ioctl               54
+#define __NR_fcntl               55
+#define __NR_mpx                 56
+#define __NR_setpgid             57
+#define __NR_ulimit              58
+#define __NR_oldolduname         59
+#define __NR_umask               60
+#define __NR_chroot              61
+#define __NR_ustat               62
+#define __NR_dup2                63
+#define __NR_getppid             64
+#define __NR_getpgrp             65
+#define __NR_setsid              66
+#define __NR_sigaction           67
+#define __NR_sgetmask            68
+#define __NR_ssetmask            69
+#define __NR_setreuid            70
+#define __NR_setregid            71
+#define __NR_sigsuspend          72
+#define __NR_sigpending          73
+#define __NR_sethostname         74
+#define __NR_setrlimit           75
+#define __NR_getrlimit           76     /* Back compatible 2Gig limited rlimit */
+#define __NR_getrusage           77
+#define __NR_gettimeofday        78
+#define __NR_settimeofday        79
+#define __NR_getgroups           80
+#define __NR_setgroups           81
+#define __NR_select              82
+#define __NR_symlink             83
+#define __NR_oldlstat            84
+#define __NR_readlink            85
+#define __NR_uselib              86
+#define __NR_swapon              87
+#define __NR_reboot              88
+#define __NR_readdir             89
+#define __NR_mmap                90
+#define __NR_munmap              91
+#define __NR_truncate            92
+#define __NR_ftruncate           93
+#define __NR_fchmod              94
+#define __NR_fchown              95
+#define __NR_getpriority         96
+#define __NR_setpriority         97
+#define __NR_profil              98
+#define __NR_statfs              99
+#define __NR_fstatfs            100
+#define __NR_ioperm             101
+#define __NR_socketcall         102
+#define __NR_syslog             103
+#define __NR_setitimer          104
+#define __NR_getitimer          105
+#define __NR_stat               106
+#define __NR_lstat              107
+#define __NR_fstat              108
+#define __NR_olduname           109
+#define __NR_iopl               110
+#define __NR_vhangup            111
+#define __NR_idle               112
+#define __NR_vm86old            113
+#define __NR_wait4              114
+#define __NR_swapoff            115
+#define __NR_sysinfo            116
+#define __NR_ipc                117
+#define __NR_fsync              118
+#define __NR_sigreturn          119
+#define __NR_clone              120
+#define __NR_setdomainname      121
+#define __NR_uname              122
+#define __NR_modify_ldt         123
+#define __NR_adjtimex           124
+#define __NR_mprotect           125
+#define __NR_sigprocmask        126
+#define __NR_create_module      127
+#define __NR_init_module        128
+#define __NR_delete_module      129
+#define __NR_get_kernel_syms    130
+#define __NR_quotactl           131
+#define __NR_getpgid            132
+#define __NR_fchdir             133
+#define __NR_bdflush            134
+#define __NR_sysfs              135
+#define __NR_personality        136
+#define __NR_afs_syscall        137 /* Syscall for Andrew File System */
+#define __NR_setfsuid           138
+#define __NR_setfsgid           139
+#define __NR__llseek            140
+#define __NR_getdents           141
+#define __NR__newselect         142
+#define __NR_flock              143
+#define __NR_msync              144
+#define __NR_readv              145
+#define __NR_writev             146
+#define __NR_getsid             147
+#define __NR_fdatasync          148
+#define __NR__sysctl            149
+#define __NR_mlock              150
+#define __NR_munlock            151
+#define __NR_mlockall           152
+#define __NR_munlockall         153
+#define __NR_sched_setparam             154
+#define __NR_sched_getparam             155
+#define __NR_sched_setscheduler         156
+#define __NR_sched_getscheduler         157
+#define __NR_sched_yield                158
+#define __NR_sched_get_priority_max     159
+#define __NR_sched_get_priority_min     160
+#define __NR_sched_rr_get_interval      161
+#define __NR_nanosleep          162
+#define __NR_mremap             163
+#define __NR_setresuid          164
+#define __NR_getresuid          165
+#define __NR_vm86               166
+#define __NR_query_module       167
+#define __NR_poll               168
+#define __NR_nfsservctl         169
+#define __NR_setresgid          170
+#define __NR_getresgid          171
+#define __NR_prctl              172
+#define __NR_rt_sigreturn       173
+#define __NR_rt_sigaction       174
+#define __NR_rt_sigprocmask     175
+#define __NR_rt_sigpending      176
+#define __NR_rt_sigtimedwait    177
+#define __NR_rt_sigqueueinfo    178
+#define __NR_rt_sigsuspend      179
+#define __NR_pread64            180
+#define __NR_pwrite64           181
+#define __NR_chown              182
+#define __NR_getcwd             183
+#define __NR_capget             184
+#define __NR_capset             185
+#define __NR_sigaltstack        186
+#define __NR_sendfile           187
+#define __NR_streams1           188     /* some people actually want it */
+#define __NR_streams2           189     /* some people actually want it */
+#define __NR_vfork              190
+#define __NR_ugetrlimit         191     /* SuS compliant getrlimit */
+#define __NR_mmap2              192
+#define __NR_truncate64         193
+#define __NR_ftruncate64        194
+#define __NR_stat64             195
+#define __NR_lstat64            196
+#define __NR_fstat64            197
+#define __NR_lchown32           198
+#define __NR_getuid32           199
+#define __NR_getgid32           200
+#define __NR_geteuid32          201
+#define __NR_getegid32          202
+#define __NR_setreuid32         203
+#define __NR_setregid32         204
+#define __NR_getgroups32        205
+#define __NR_setgroups32        206
+#define __NR_fchown32           207
+#define __NR_setresuid32        208
+#define __NR_getresuid32        209
+#define __NR_setresgid32        210
+#define __NR_getresgid32        211
+#define __NR_chown32            212
+#define __NR_setuid32           213
+#define __NR_setgid32           214
+#define __NR_setfsuid32         215
+#define __NR_setfsgid32         216
+#define __NR_pivot_root         217
+#define __NR_mincore            218
+#define __NR_madvise            219
+#define __NR_getdents64         220
+#define __NR_fcntl64            221
+/* 223 is unused */
+#define __NR_gettid             224
+#define __NR_readahead          225
+#define __NR_setxattr           226
+#define __NR_lsetxattr          227
+#define __NR_fsetxattr          228
+#define __NR_getxattr           229
+#define __NR_lgetxattr          230
+#define __NR_fgetxattr          231
+#define __NR_listxattr          232
+#define __NR_llistxattr         233
+#define __NR_flistxattr         234
+#define __NR_removexattr        235
+#define __NR_lremovexattr       236
+#define __NR_fremovexattr       237
+#define __NR_tkill              238
+#define __NR_sendfile64         239
+#define __NR_futex              240
+#define __NR_sched_setaffinity  241
+#define __NR_sched_getaffinity  242
+#define __NR_set_thread_area    243
+#define __NR_get_thread_area    244
+#define __NR_io_setup           245
+#define __NR_io_destroy         246
+#define __NR_io_getevents       247
+#define __NR_io_submit          248
+#define __NR_io_cancel          249
+#define __NR_fadvise64          250
+
+#define __NR_exit_group         252
+#define __NR_lookup_dcookie     253
+#define __NR_epoll_create       254
+#define __NR_epoll_ctl          255
+#define __NR_epoll_wait         256
+#define __NR_remap_file_pages   257
+#define __NR_set_tid_address    258
+#define __NR_timer_create       259
+#define __NR_timer_settime      (__NR_timer_create+1)
+#define __NR_timer_gettime      (__NR_timer_create+2)
+#define __NR_timer_getoverrun   (__NR_timer_create+3)
+#define __NR_timer_delete       (__NR_timer_create+4)
+#define __NR_clock_settime      (__NR_timer_create+5)
+#define __NR_clock_gettime      (__NR_timer_create+6)
+#define __NR_clock_getres       (__NR_timer_create+7)
+#define __NR_clock_nanosleep    (__NR_timer_create+8)
+#define __NR_statfs64           268
+#define __NR_fstatfs64          269
+#define __NR_tgkill             270
+#define __NR_utimes             271
+#define __NR_fadvise64_64       272
+#define __NR_vserver            273
+#define __NR_mbind              274
+#define __NR_get_mempolicy      275
+#define __NR_set_mempolicy      276
+#define __NR_mq_open            277
+#define __NR_mq_unlink          (__NR_mq_open+1)
+#define __NR_mq_timedsend       (__NR_mq_open+2)
+#define __NR_mq_timedreceive    (__NR_mq_open+3)
+#define __NR_mq_notify          (__NR_mq_open+4)
+#define __NR_mq_getsetattr      (__NR_mq_open+5)
+#define __NR_kexec_load         283
+#define __NR_waitid             284
+#define __NR_add_key            285
+#define __NR_request_key        286
+#define __NR_keyctl             287
+#define __NR_ioprio_set         288
+#define __NR_ioprio_get         289
+#define __NR_inotify_init       290
+#define __NR_inotify_add_watch  291
+#define __NR_inotify_rm_watch   292
+/* 293 is unused */
+#define __NR_migrate_pages      294
+#define __NR_openat             295
+#define __NR_mkdirat            296
+#define __NR_mknodat            297
+#define __NR_fchownat           298
+#define __NR_futimesat          299
+#define __NR_fstatat64          300
+#define __NR_unlinkat           301
+#define __NR_renameat           302
+#define __NR_linkat             303
+#define __NR_symlinkat          304
+#define __NR_readlinkat         305
+#define __NR_fchmodat           306
+#define __NR_faccessat          307
+#define __NR_pselect6           308
+#define __NR_ppoll              309
+#define __NR_unshare            310
+#define __NR_set_robust_list    311
+#define __NR_get_robust_list    312
+#define __NR_splice             313
+#define __NR_sync_file_range    314
+#define __NR_tee                315
+#define __NR_vmsplice           316
+#define __NR_move_pages         317
+#define __NR_getcpu             318
+#define __NR_epoll_pwait        319
+#define __NR_utimensat          320
+#define __NR_signalfd           321
+#define __NR_timerfd_create     322
+#define __NR_eventfd            323
+#define __NR_fallocate          324
+#define __NR_timerfd_settime    325
+#define __NR_timerfd_gettime    326
+#define __NR_signalfd4          327
+#define __NR_eventfd2           328
+#define __NR_epoll_create1      329
+#define __NR_dup3               330
+#define __NR_pipe2              331
+#define __NR_inotify_init1      332
+
+#define NR_syscalls 333
+
+#ifdef __KERNEL__
+
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_OLD_STAT
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#ifndef cond_syscall
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_UNISTD_H */
diff --git a/arch/sh/include/asm/unistd_64.h b/arch/sh/include/asm/unistd_64.h
new file mode 100644
index 000000000000..7c54e91753c1
--- /dev/null
+++ b/arch/sh/include/asm/unistd_64.h
@@ -0,0 +1,423 @@
+#ifndef __ASM_SH_UNISTD_64_H
+#define __ASM_SH_UNISTD_64_H
+
+/*
+ * include/asm-sh/unistd_64.h
+ *
+ * This file contains the system call numbers.
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2003 - 2007 Paul Mundt
+ * Copyright (C) 2004  Sean McGoogan
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#define __NR_restart_syscall      0
+#define __NR_exit                 1
+#define __NR_fork                 2
+#define __NR_read                 3
+#define __NR_write                4
+#define __NR_open                 5
+#define __NR_close                6
+#define __NR_waitpid              7
+#define __NR_creat                8
+#define __NR_link                 9
+#define __NR_unlink              10
+#define __NR_execve              11
+#define __NR_chdir               12
+#define __NR_time                13
+#define __NR_mknod               14
+#define __NR_chmod               15
+#define __NR_lchown              16
+#define __NR_break               17
+#define __NR_oldstat             18
+#define __NR_lseek               19
+#define __NR_getpid              20
+#define __NR_mount               21
+#define __NR_umount              22
+#define __NR_setuid              23
+#define __NR_getuid              24
+#define __NR_stime               25
+#define __NR_ptrace              26
+#define __NR_alarm               27
+#define __NR_oldfstat            28
+#define __NR_pause               29
+#define __NR_utime               30
+#define __NR_stty                31
+#define __NR_gtty                32
+#define __NR_access              33
+#define __NR_nice                34
+#define __NR_ftime               35
+#define __NR_sync                36
+#define __NR_kill                37
+#define __NR_rename              38
+#define __NR_mkdir               39
+#define __NR_rmdir               40
+#define __NR_dup                 41
+#define __NR_pipe                42
+#define __NR_times               43
+#define __NR_prof                44
+#define __NR_brk                 45
+#define __NR_setgid              46
+#define __NR_getgid              47
+#define __NR_signal              48
+#define __NR_geteuid             49
+#define __NR_getegid             50
+#define __NR_acct                51
+#define __NR_umount2             52
+#define __NR_lock                53
+#define __NR_ioctl               54
+#define __NR_fcntl               55
+#define __NR_mpx                 56
+#define __NR_setpgid             57
+#define __NR_ulimit              58
+#define __NR_oldolduname         59
+#define __NR_umask               60
+#define __NR_chroot              61
+#define __NR_ustat               62
+#define __NR_dup2                63
+#define __NR_getppid             64
+#define __NR_getpgrp             65
+#define __NR_setsid              66
+#define __NR_sigaction           67
+#define __NR_sgetmask            68
+#define __NR_ssetmask            69
+#define __NR_setreuid            70
+#define __NR_setregid            71
+#define __NR_sigsuspend          72
+#define __NR_sigpending          73
+#define __NR_sethostname         74
+#define __NR_setrlimit           75
+#define __NR_getrlimit           76     /* Back compatible 2Gig limited rlimit */
+#define __NR_getrusage           77
+#define __NR_gettimeofday        78
+#define __NR_settimeofday        79
+#define __NR_getgroups           80
+#define __NR_setgroups           81
+#define __NR_select              82
+#define __NR_symlink             83
+#define __NR_oldlstat            84
+#define __NR_readlink            85
+#define __NR_uselib              86
+#define __NR_swapon              87
+#define __NR_reboot              88
+#define __NR_readdir             89
+#define __NR_mmap                90
+#define __NR_munmap              91
+#define __NR_truncate            92
+#define __NR_ftruncate           93
+#define __NR_fchmod              94
+#define __NR_fchown              95
+#define __NR_getpriority         96
+#define __NR_setpriority         97
+#define __NR_profil              98
+#define __NR_statfs              99
+#define __NR_fstatfs            100
+#define __NR_ioperm             101
+#define __NR_socketcall         102     /* old implementation of socket systemcall */
+#define __NR_syslog             103
+#define __NR_setitimer          104
+#define __NR_getitimer          105
+#define __NR_stat               106
+#define __NR_lstat              107
+#define __NR_fstat              108
+#define __NR_olduname           109
+#define __NR_iopl               110
+#define __NR_vhangup            111
+#define __NR_idle               112
+#define __NR_vm86old            113
+#define __NR_wait4              114
+#define __NR_swapoff            115
+#define __NR_sysinfo            116
+#define __NR_ipc                117
+#define __NR_fsync              118
+#define __NR_sigreturn          119
+#define __NR_clone              120
+#define __NR_setdomainname      121
+#define __NR_uname              122
+#define __NR_modify_ldt         123
+#define __NR_adjtimex           124
+#define __NR_mprotect           125
+#define __NR_sigprocmask        126
+#define __NR_create_module      127
+#define __NR_init_module        128
+#define __NR_delete_module      129
+#define __NR_get_kernel_syms    130
+#define __NR_quotactl           131
+#define __NR_getpgid            132
+#define __NR_fchdir             133
+#define __NR_bdflush            134
+#define __NR_sysfs              135
+#define __NR_personality        136
+#define __NR_afs_syscall        137 /* Syscall for Andrew File System */
+#define __NR_setfsuid           138
+#define __NR_setfsgid           139
+#define __NR__llseek            140
+#define __NR_getdents           141
+#define __NR__newselect         142
+#define __NR_flock              143
+#define __NR_msync              144
+#define __NR_readv              145
+#define __NR_writev             146
+#define __NR_getsid             147
+#define __NR_fdatasync          148
+#define __NR__sysctl            149
+#define __NR_mlock              150
+#define __NR_munlock            151
+#define __NR_mlockall           152
+#define __NR_munlockall         153
+#define __NR_sched_setparam             154
+#define __NR_sched_getparam             155
+#define __NR_sched_setscheduler         156
+#define __NR_sched_getscheduler         157
+#define __NR_sched_yield                158
+#define __NR_sched_get_priority_max     159
+#define __NR_sched_get_priority_min     160
+#define __NR_sched_rr_get_interval      161
+#define __NR_nanosleep          162
+#define __NR_mremap             163
+#define __NR_setresuid          164
+#define __NR_getresuid          165
+#define __NR_vm86               166
+#define __NR_query_module       167
+#define __NR_poll               168
+#define __NR_nfsservctl         169
+#define __NR_setresgid          170
+#define __NR_getresgid          171
+#define __NR_prctl              172
+#define __NR_rt_sigreturn       173
+#define __NR_rt_sigaction       174
+#define __NR_rt_sigprocmask     175
+#define __NR_rt_sigpending      176
+#define __NR_rt_sigtimedwait    177
+#define __NR_rt_sigqueueinfo    178
+#define __NR_rt_sigsuspend      179
+#define __NR_pread64            180
+#define __NR_pwrite64           181
+#define __NR_chown              182
+#define __NR_getcwd             183
+#define __NR_capget             184
+#define __NR_capset             185
+#define __NR_sigaltstack        186
+#define __NR_sendfile           187
+#define __NR_streams1           188     /* some people actually want it */
+#define __NR_streams2           189     /* some people actually want it */
+#define __NR_vfork              190
+#define __NR_ugetrlimit         191     /* SuS compliant getrlimit */
+#define __NR_mmap2              192
+#define __NR_truncate64         193
+#define __NR_ftruncate64        194
+#define __NR_stat64             195
+#define __NR_lstat64            196
+#define __NR_fstat64            197
+#define __NR_lchown32           198
+#define __NR_getuid32           199
+#define __NR_getgid32           200
+#define __NR_geteuid32          201
+#define __NR_getegid32          202
+#define __NR_setreuid32         203
+#define __NR_setregid32         204
+#define __NR_getgroups32        205
+#define __NR_setgroups32        206
+#define __NR_fchown32           207
+#define __NR_setresuid32        208
+#define __NR_getresuid32        209
+#define __NR_setresgid32        210
+#define __NR_getresgid32        211
+#define __NR_chown32            212
+#define __NR_setuid32           213
+#define __NR_setgid32           214
+#define __NR_setfsuid32         215
+#define __NR_setfsgid32         216
+#define __NR_pivot_root         217
+#define __NR_mincore            218
+#define __NR_madvise            219
+
+/* Non-multiplexed socket family */
+#define __NR_socket             220
+#define __NR_bind               221
+#define __NR_connect            222
+#define __NR_listen             223
+#define __NR_accept             224
+#define __NR_getsockname        225
+#define __NR_getpeername        226
+#define __NR_socketpair         227
+#define __NR_send               228
+#define __NR_sendto             229
+#define __NR_recv               230
+#define __NR_recvfrom           231
+#define __NR_shutdown           232
+#define __NR_setsockopt         233
+#define __NR_getsockopt         234
+#define __NR_sendmsg            235
+#define __NR_recvmsg            236
+
+/* Non-multiplexed IPC family */
+#define __NR_semop              237
+#define __NR_semget             238
+#define __NR_semctl             239
+#define __NR_msgsnd             240
+#define __NR_msgrcv             241
+#define __NR_msgget             242
+#define __NR_msgctl             243
+#if 0
+#define __NR_shmatcall          244
+#endif
+#define __NR_shmdt              245
+#define __NR_shmget             246
+#define __NR_shmctl             247
+
+#define __NR_getdents64         248
+#define __NR_fcntl64            249
+/* 223 is unused */
+#define __NR_gettid             252
+#define __NR_readahead          253
+#define __NR_setxattr           254
+#define __NR_lsetxattr          255
+#define __NR_fsetxattr          256
+#define __NR_getxattr           257
+#define __NR_lgetxattr          258
+#define __NR_fgetxattr          269
+#define __NR_listxattr          260
+#define __NR_llistxattr         261
+#define __NR_flistxattr         262
+#define __NR_removexattr        263
+#define __NR_lremovexattr       264
+#define __NR_fremovexattr       265
+#define __NR_tkill              266
+#define __NR_sendfile64         267
+#define __NR_futex              268
+#define __NR_sched_setaffinity  269
+#define __NR_sched_getaffinity  270
+#define __NR_set_thread_area    271
+#define __NR_get_thread_area    272
+#define __NR_io_setup           273
+#define __NR_io_destroy         274
+#define __NR_io_getevents       275
+#define __NR_io_submit          276
+#define __NR_io_cancel          277
+#define __NR_fadvise64          278
+#define __NR_exit_group         280
+
+#define __NR_lookup_dcookie     281
+#define __NR_epoll_create       282
+#define __NR_epoll_ctl          283
+#define __NR_epoll_wait         284
+#define __NR_remap_file_pages   285
+#define __NR_set_tid_address    286
+#define __NR_timer_create       287
+#define __NR_timer_settime      (__NR_timer_create+1)
+#define __NR_timer_gettime      (__NR_timer_create+2)
+#define __NR_timer_getoverrun   (__NR_timer_create+3)
+#define __NR_timer_delete       (__NR_timer_create+4)
+#define __NR_clock_settime      (__NR_timer_create+5)
+#define __NR_clock_gettime      (__NR_timer_create+6)
+#define __NR_clock_getres       (__NR_timer_create+7)
+#define __NR_clock_nanosleep    (__NR_timer_create+8)
+#define __NR_statfs64           296
+#define __NR_fstatfs64          297
+#define __NR_tgkill             298
+#define __NR_utimes             299
+#define __NR_fadvise64_64       300
+#define __NR_vserver            301
+#define __NR_mbind              302
+#define __NR_get_mempolicy      303
+#define __NR_set_mempolicy      304
+#define __NR_mq_open            305
+#define __NR_mq_unlink          (__NR_mq_open+1)
+#define __NR_mq_timedsend       (__NR_mq_open+2)
+#define __NR_mq_timedreceive    (__NR_mq_open+3)
+#define __NR_mq_notify          (__NR_mq_open+4)
+#define __NR_mq_getsetattr      (__NR_mq_open+5)
+#define __NR_kexec_load         311
+#define __NR_waitid             312
+#define __NR_add_key            313
+#define __NR_request_key        314
+#define __NR_keyctl             315
+#define __NR_ioprio_set         316
+#define __NR_ioprio_get         317
+#define __NR_inotify_init       318
+#define __NR_inotify_add_watch  319
+#define __NR_inotify_rm_watch   320
+/* 321 is unused */
+#define __NR_migrate_pages      322
+#define __NR_openat             323
+#define __NR_mkdirat            324
+#define __NR_mknodat            325
+#define __NR_fchownat           326
+#define __NR_futimesat          327
+#define __NR_fstatat64          328
+#define __NR_unlinkat           329
+#define __NR_renameat           330
+#define __NR_linkat             331
+#define __NR_symlinkat          332
+#define __NR_readlinkat         333
+#define __NR_fchmodat           334
+#define __NR_faccessat          335
+#define __NR_pselect6           336
+#define __NR_ppoll              337
+#define __NR_unshare            338
+#define __NR_set_robust_list    339
+#define __NR_get_robust_list    340
+#define __NR_splice             341
+#define __NR_sync_file_range    342
+#define __NR_tee                343
+#define __NR_vmsplice           344
+#define __NR_move_pages         345
+#define __NR_getcpu             346
+#define __NR_epoll_pwait        347
+#define __NR_utimensat          348
+#define __NR_signalfd           349
+#define __NR_timerfd_create     350
+#define __NR_eventfd            351
+#define __NR_fallocate          352
+#define __NR_timerfd_settime    353
+#define __NR_timerfd_gettime    354
+#define __NR_signalfd4          355
+#define __NR_eventfd2           356
+#define __NR_epoll_create1      357
+#define __NR_dup3               358
+#define __NR_pipe2              359
+#define __NR_inotify_init1      360
+
+#ifdef __KERNEL__
+
+#define NR_syscalls 361
+
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_OLD_STAT
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#ifndef cond_syscall
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_UNISTD_64_H */
diff --git a/include/asm-sh/user.h b/arch/sh/include/asm/user.h
index 8fd3cf6c58d4..8fd3cf6c58d4 100644
--- a/include/asm-sh/user.h
+++ b/arch/sh/include/asm/user.h
diff --git a/include/asm-sh/vga.h b/arch/sh/include/asm/vga.h
index 06a5de8ace1a..06a5de8ace1a 100644
--- a/include/asm-sh/vga.h
+++ b/arch/sh/include/asm/vga.h
diff --git a/arch/sh/include/asm/watchdog.h b/arch/sh/include/asm/watchdog.h
new file mode 100644
index 000000000000..f024fed00a72
--- /dev/null
+++ b/arch/sh/include/asm/watchdog.h
@@ -0,0 +1,107 @@
+/*
+ * include/asm-sh/watchdog.h
+ *
+ * Copyright (C) 2002, 2003 Paul Mundt
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef __ASM_SH_WATCHDOG_H
+#define __ASM_SH_WATCHDOG_H
+#ifdef __KERNEL__
+
+#include <linux/types.h>
+#include <cpu/watchdog.h>
+#include <asm/io.h>
+
+/* 
+ * See cpu-sh2/watchdog.h for explanation of this stupidity..
+ */
+#ifndef WTCNT_R
+#  define WTCNT_R       WTCNT
+#endif
+
+#ifndef WTCSR_R
+#  define WTCSR_R       WTCSR
+#endif
+
+#define WTCNT_HIGH      0x5a
+#define WTCSR_HIGH      0xa5
+
+#define WTCSR_CKS2      0x04
+#define WTCSR_CKS1      0x02
+#define WTCSR_CKS0      0x01
+
+/*
+ * CKS0-2 supports a number of clock division ratios. At the time the watchdog
+ * is enabled, it defaults to a 41 usec overflow period .. we overload this to
+ * something a little more reasonable, and really can't deal with anything
+ * lower than WTCSR_CKS_1024, else we drop back into the usec range.
+ *
+ * Clock Division Ratio         Overflow Period
+ * --------------------------------------------
+ *     1/32 (initial value)       41 usecs
+ *     1/64                       82 usecs
+ *     1/128                     164 usecs
+ *     1/256                     328 usecs
+ *     1/512                     656 usecs
+ *     1/1024                   1.31 msecs
+ *     1/2048                   2.62 msecs
+ *     1/4096                   5.25 msecs
+ */
+#define WTCSR_CKS_32    0x00
+#define WTCSR_CKS_64    0x01
+#define WTCSR_CKS_128   0x02
+#define WTCSR_CKS_256   0x03
+#define WTCSR_CKS_512   0x04
+#define WTCSR_CKS_1024  0x05
+#define WTCSR_CKS_2048  0x06
+#define WTCSR_CKS_4096  0x07
+
+/**
+ *      sh_wdt_read_cnt - Read from Counter
+ *      Reads back the WTCNT value.
+ */
+static inline __u8 sh_wdt_read_cnt(void)
+{
+        return ctrl_inb(WTCNT_R);
+}
+
+/**
+ *      sh_wdt_write_cnt - Write to Counter
+ *      @val: Value to write
+ *
+ *      Writes the given value @val to the lower byte of the timer counter.
+ *      The upper byte is set manually on each write.
+ */
+static inline void sh_wdt_write_cnt(__u8 val)
+{
+        ctrl_outw((WTCNT_HIGH << 8) | (__u16)val, WTCNT);
+}
+
+/**
+ *      sh_wdt_read_csr - Read from Control/Status Register
+ *
+ *      Reads back the WTCSR value.
+ */
+static inline __u8 sh_wdt_read_csr(void)
+{
+        return ctrl_inb(WTCSR_R);
+}
+
+/**
+ *      sh_wdt_write_csr - Write to Control/Status Register
+ *      @val: Value to write
+ *
+ *      Writes the given value @val to the lower byte of the control/status
+ *      register. The upper byte is set manually on each write.
+ */
+static inline void sh_wdt_write_csr(__u8 val)
+{
+        ctrl_outw((WTCSR_HIGH << 8) | (__u16)val, WTCSR);
+}
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_WATCHDOG_H */
diff --git a/include/asm-sh/xor.h b/arch/sh/include/asm/xor.h
index c82eb12a5b18..c82eb12a5b18 100644
--- a/include/asm-sh/xor.h
+++ b/arch/sh/include/asm/xor.h
diff --git a/include/asm-sh/cpu-sh2/addrspace.h b/arch/sh/include/cpu-common/cpu/addrspace.h
index 2b9ab93efa4e..2b9ab93efa4e 100644
--- a/include/asm-sh/cpu-sh2/addrspace.h
+++ b/arch/sh/include/cpu-common/cpu/addrspace.h
diff --git a/arch/sh/include/cpu-common/cpu/cacheflush.h b/arch/sh/include/cpu-common/cpu/cacheflush.h
new file mode 100644
index 000000000000..c3db00b73605
--- /dev/null
+++ b/arch/sh/include/cpu-common/cpu/cacheflush.h
@@ -0,0 +1,44 @@
+/*
+ * include/asm-sh/cpu-sh2/cacheflush.h
+ *
+ * Copyright (C) 2003 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH2_CACHEFLUSH_H
+#define __ASM_CPU_SH2_CACHEFLUSH_H
+
+/*
+ * Cache flushing:
+ *
+ *  - flush_cache_all() flushes entire cache
+ *  - flush_cache_mm(mm) flushes the specified mm context's cache lines
+ *  - flush_cache_dup mm(mm) handles cache flushing when forking
+ *  - flush_cache_page(mm, vmaddr, pfn) flushes a single page
+ *  - flush_cache_range(vma, start, end) flushes a range of pages
+ *
+ *  - flush_dcache_page(pg) flushes(wback&invalidates) a page for dcache
+ *  - flush_icache_range(start, end) flushes(invalidates) a range for icache
+ *  - flush_icache_page(vma, pg) flushes(invalidates) a page for icache
+ *
+ *  Caches are indexed (effectively) by physical address on SH-2, so
+ *  we don't need them.
+ */
+#define flush_cache_all()                       do { } while (0)
+#define flush_cache_mm(mm)                      do { } while (0)
+#define flush_cache_dup_mm(mm)                  do { } while (0)
+#define flush_cache_range(vma, start, end)      do { } while (0)
+#define flush_cache_page(vma, vmaddr, pfn)      do { } while (0)
+#define flush_dcache_page(page)                 do { } while (0)
+#define flush_dcache_mmap_lock(mapping)         do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)       do { } while (0)
+#define flush_icache_range(start, end)          do { } while (0)
+#define flush_icache_page(vma,pg)               do { } while (0)
+#define flush_icache_user_range(vma,pg,adr,len) do { } while (0)
+#define flush_cache_sigtramp(vaddr)             do { } while (0)
+
+#define p3_cache_init()                         do { } while (0)
+
+#endif /* __ASM_CPU_SH2_CACHEFLUSH_H */
diff --git a/include/asm-sh/cpu-sh2/mmu_context.h b/arch/sh/include/cpu-common/cpu/mmu_context.h
index beeb299e01ec..beeb299e01ec 100644
--- a/include/asm-sh/cpu-sh2/mmu_context.h
+++ b/arch/sh/include/cpu-common/cpu/mmu_context.h
diff --git a/include/asm-sh/cpu-sh2/rtc.h b/arch/sh/include/cpu-common/cpu/rtc.h
index 39e2d6e94782..39e2d6e94782 100644
--- a/include/asm-sh/cpu-sh2/rtc.h
+++ b/arch/sh/include/cpu-common/cpu/rtc.h
diff --git a/include/asm-sh/cpu-sh2/sigcontext.h b/arch/sh/include/cpu-common/cpu/sigcontext.h
index fe5c15dd6e87..fe5c15dd6e87 100644
--- a/include/asm-sh/cpu-sh2/sigcontext.h
+++ b/arch/sh/include/cpu-common/cpu/sigcontext.h
diff --git a/include/asm-sh/cpu-sh2/timer.h b/arch/sh/include/cpu-common/cpu/timer.h
index a39c241e8195..a39c241e8195 100644
--- a/include/asm-sh/cpu-sh2/timer.h
+++ b/arch/sh/include/cpu-common/cpu/timer.h
diff --git a/include/asm-sh/cpu-sh2/cache.h b/arch/sh/include/cpu-sh2/cpu/cache.h
index 4e0b16500686..4e0b16500686 100644
--- a/include/asm-sh/cpu-sh2/cache.h
+++ b/arch/sh/include/cpu-sh2/cpu/cache.h
diff --git a/include/asm-sh/cpu-sh2/dma.h b/arch/sh/include/cpu-sh2/cpu/dma.h
index d66b43cdc637..d66b43cdc637 100644
--- a/include/asm-sh/cpu-sh2/dma.h
+++ b/arch/sh/include/cpu-sh2/cpu/dma.h
diff --git a/include/asm-sh/cpu-sh2/freq.h b/arch/sh/include/cpu-sh2/cpu/freq.h
index 31de475da70b..31de475da70b 100644
--- a/include/asm-sh/cpu-sh2/freq.h
+++ b/arch/sh/include/cpu-sh2/cpu/freq.h
diff --git a/include/asm-sh/cpu-sh2/ubc.h b/arch/sh/include/cpu-sh2/cpu/ubc.h
index ba0e87f19c7a..ba0e87f19c7a 100644
--- a/include/asm-sh/cpu-sh2/ubc.h
+++ b/arch/sh/include/cpu-sh2/cpu/ubc.h
diff --git a/include/asm-sh/cpu-sh2/watchdog.h b/arch/sh/include/cpu-sh2/cpu/watchdog.h
index 393161c9c6d0..393161c9c6d0 100644
--- a/include/asm-sh/cpu-sh2/watchdog.h
+++ b/arch/sh/include/cpu-sh2/cpu/watchdog.h
diff --git a/include/asm-sh/cpu-sh2a/cache.h b/arch/sh/include/cpu-sh2a/cpu/cache.h
index afe228b3f493..afe228b3f493 100644
--- a/include/asm-sh/cpu-sh2a/cache.h
+++ b/arch/sh/include/cpu-sh2a/cpu/cache.h
diff --git a/arch/sh/include/cpu-sh2a/cpu/dma.h b/arch/sh/include/cpu-sh2a/cpu/dma.h
new file mode 100644
index 000000000000..27a13ef4fdfc
--- /dev/null
+++ b/arch/sh/include/cpu-sh2a/cpu/dma.h
@@ -0,0 +1 @@
+#include <cpu-sh2/cpu/dma.h>
diff --git a/include/asm-sh/cpu-sh2a/freq.h b/arch/sh/include/cpu-sh2a/cpu/freq.h
index 830fd43b6cdc..830fd43b6cdc 100644
--- a/include/asm-sh/cpu-sh2a/freq.h
+++ b/arch/sh/include/cpu-sh2a/cpu/freq.h
diff --git a/include/asm-sh/cpu-sh2a/rtc.h b/arch/sh/include/cpu-sh2a/cpu/rtc.h
index afb511e2bed7..afb511e2bed7 100644
--- a/include/asm-sh/cpu-sh2a/rtc.h
+++ b/arch/sh/include/cpu-sh2a/cpu/rtc.h
diff --git a/arch/sh/include/cpu-sh2a/cpu/ubc.h b/arch/sh/include/cpu-sh2a/cpu/ubc.h
new file mode 100644
index 000000000000..8ce2fc1cf625
--- /dev/null
+++ b/arch/sh/include/cpu-sh2a/cpu/ubc.h
@@ -0,0 +1 @@
+#include <cpu-sh2/cpu/ubc.h>
diff --git a/arch/sh/include/cpu-sh2a/cpu/watchdog.h b/arch/sh/include/cpu-sh2a/cpu/watchdog.h
new file mode 100644
index 000000000000..e7e8259e468c
--- /dev/null
+++ b/arch/sh/include/cpu-sh2a/cpu/watchdog.h
@@ -0,0 +1 @@
+#include <cpu-sh2/cpu/watchdog.h>
diff --git a/include/asm-sh/cpu-sh3/adc.h b/arch/sh/include/cpu-sh3/cpu/adc.h
index b289e3ca19a6..b289e3ca19a6 100644
--- a/include/asm-sh/cpu-sh3/adc.h
+++ b/arch/sh/include/cpu-sh3/cpu/adc.h
diff --git a/include/asm-sh/cpu-sh3/cache.h b/arch/sh/include/cpu-sh3/cpu/cache.h
index bee2d81c56bf..bee2d81c56bf 100644
--- a/include/asm-sh/cpu-sh3/cache.h
+++ b/arch/sh/include/cpu-sh3/cpu/cache.h
diff --git a/arch/sh/include/cpu-sh3/cpu/cacheflush.h b/arch/sh/include/cpu-sh3/cpu/cacheflush.h
new file mode 100644
index 000000000000..abc909880807
--- /dev/null
+++ b/arch/sh/include/cpu-sh3/cpu/cacheflush.h
@@ -0,0 +1,36 @@
+/*
+ * include/asm-sh/cpu-sh3/cacheflush.h
+ *
+ * Copyright (C) 1999 Niibe Yutaka
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH3_CACHEFLUSH_H
+#define __ASM_CPU_SH3_CACHEFLUSH_H
+
+#if defined(CONFIG_SH7705_CACHE_32KB)
+/* SH7705 is an SH3 processor with 32KB cache. This has alias issues like the
+ * SH4. Unlike the SH4 this is a unified cache so we need to do some work
+ * in mmap when 'exec'ing a new binary
+ */
+ /* 32KB cache, 4kb PAGE sizes need to check bit 12 */
+#define CACHE_ALIAS 0x00001000
+
+#define PG_mapped       PG_arch_1
+
+void flush_cache_all(void);
+void flush_cache_mm(struct mm_struct *mm);
+#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
+void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
+                              unsigned long end);
+void flush_cache_page(struct vm_area_struct *vma, unsigned long addr, unsigned long pfn);
+void flush_dcache_page(struct page *pg);
+void flush_icache_range(unsigned long start, unsigned long end);
+void flush_icache_page(struct vm_area_struct *vma, struct page *page);
+#else
+#include <cpu-common/cpu/cacheflush.h>
+#endif
+
+#endif /* __ASM_CPU_SH3_CACHEFLUSH_H */
diff --git a/include/asm-sh/cpu-sh3/dac.h b/arch/sh/include/cpu-sh3/cpu/dac.h
index 05fda8316ebc..05fda8316ebc 100644
--- a/include/asm-sh/cpu-sh3/dac.h
+++ b/arch/sh/include/cpu-sh3/cpu/dac.h
diff --git a/include/asm-sh/cpu-sh3/dma.h b/arch/sh/include/cpu-sh3/cpu/dma.h
index 6813c3220a1d..6813c3220a1d 100644
--- a/include/asm-sh/cpu-sh3/dma.h
+++ b/arch/sh/include/cpu-sh3/cpu/dma.h
diff --git a/include/asm-sh/cpu-sh3/freq.h b/arch/sh/include/cpu-sh3/cpu/freq.h
index 53c62302b2e3..53c62302b2e3 100644
--- a/include/asm-sh/cpu-sh3/freq.h
+++ b/arch/sh/include/cpu-sh3/cpu/freq.h
diff --git a/include/asm-sh/cpu-sh3/gpio.h b/arch/sh/include/cpu-sh3/cpu/gpio.h
index 4e53eb314b8f..4e53eb314b8f 100644
--- a/include/asm-sh/cpu-sh3/gpio.h
+++ b/arch/sh/include/cpu-sh3/cpu/gpio.h
diff --git a/include/asm-sh/cpu-sh3/mmu_context.h b/arch/sh/include/cpu-sh3/cpu/mmu_context.h
index ab09da73ce77..ab09da73ce77 100644
--- a/include/asm-sh/cpu-sh3/mmu_context.h
+++ b/arch/sh/include/cpu-sh3/cpu/mmu_context.h
diff --git a/include/asm-sh/cpu-sh3/timer.h b/arch/sh/include/cpu-sh3/cpu/timer.h
index 793acf12aa08..793acf12aa08 100644
--- a/include/asm-sh/cpu-sh3/timer.h
+++ b/arch/sh/include/cpu-sh3/cpu/timer.h
diff --git a/include/asm-sh/cpu-sh3/ubc.h b/arch/sh/include/cpu-sh3/cpu/ubc.h
index 4e6381d5ff7a..4e6381d5ff7a 100644
--- a/include/asm-sh/cpu-sh3/ubc.h
+++ b/arch/sh/include/cpu-sh3/cpu/ubc.h
diff --git a/include/asm-sh/cpu-sh3/watchdog.h b/arch/sh/include/cpu-sh3/cpu/watchdog.h
index 4ee0347298d8..4ee0347298d8 100644
--- a/include/asm-sh/cpu-sh3/watchdog.h
+++ b/arch/sh/include/cpu-sh3/cpu/watchdog.h
diff --git a/include/asm-sh/cpu-sh4/addrspace.h b/arch/sh/include/cpu-sh4/cpu/addrspace.h
index a3fa733c1c7d..a3fa733c1c7d 100644
--- a/include/asm-sh/cpu-sh4/addrspace.h
+++ b/arch/sh/include/cpu-sh4/cpu/addrspace.h
diff --git a/include/asm-sh/cpu-sh4/cache.h b/arch/sh/include/cpu-sh4/cpu/cache.h
index 1c61ebf5c8e3..1c61ebf5c8e3 100644
--- a/include/asm-sh/cpu-sh4/cache.h
+++ b/arch/sh/include/cpu-sh4/cpu/cache.h
diff --git a/arch/sh/include/cpu-sh4/cpu/cacheflush.h b/arch/sh/include/cpu-sh4/cpu/cacheflush.h
new file mode 100644
index 000000000000..065306d376eb
--- /dev/null
+++ b/arch/sh/include/cpu-sh4/cpu/cacheflush.h
@@ -0,0 +1,43 @@
+/*
+ * include/asm-sh/cpu-sh4/cacheflush.h
+ *
+ * Copyright (C) 1999 Niibe Yutaka
+ * Copyright (C) 2003 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH4_CACHEFLUSH_H
+#define __ASM_CPU_SH4_CACHEFLUSH_H
+
+/*
+ *  Caches are broken on SH-4 (unless we use write-through
+ *  caching; in which case they're only semi-broken),
+ *  so we need them.
+ */
+void flush_cache_all(void);
+void flush_dcache_all(void);
+void flush_cache_mm(struct mm_struct *mm);
+#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
+void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
+                       unsigned long end);
+void flush_cache_page(struct vm_area_struct *vma, unsigned long addr,
+                      unsigned long pfn);
+void flush_dcache_page(struct page *pg);
+
+#define flush_dcache_mmap_lock(mapping)         do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)       do { } while (0)
+
+void flush_icache_range(unsigned long start, unsigned long end);
+void flush_icache_user_range(struct vm_area_struct *vma, struct page *page,
+                             unsigned long addr, int len);
+
+#define flush_icache_page(vma,pg)               do { } while (0)
+
+/* Initialization of P3 area for copy_user_page */
+void p3_cache_init(void);
+
+#define PG_mapped       PG_arch_1
+
+#endif /* __ASM_CPU_SH4_CACHEFLUSH_H */
diff --git a/include/asm-sh/cpu-sh4/dma-sh7780.h b/arch/sh/include/cpu-sh4/cpu/dma-sh7780.h
index 71b426a6e482..71b426a6e482 100644
--- a/include/asm-sh/cpu-sh4/dma-sh7780.h
+++ b/arch/sh/include/cpu-sh4/cpu/dma-sh7780.h
diff --git a/arch/sh/include/cpu-sh4/cpu/dma.h b/arch/sh/include/cpu-sh4/cpu/dma.h
new file mode 100644
index 000000000000..235b7cd1fc9a
--- /dev/null
+++ b/arch/sh/include/cpu-sh4/cpu/dma.h
@@ -0,0 +1,65 @@
+#ifndef __ASM_CPU_SH4_DMA_H
+#define __ASM_CPU_SH4_DMA_H
+
+#define DMAOR_INIT      ( 0x8000 | DMAOR_DME )
+
+/* SH7751/7760/7780 DMA IRQ sources */
+#define DMTE0_IRQ       34
+#define DMTE1_IRQ       35
+#define DMTE2_IRQ       36
+#define DMTE3_IRQ       37
+#define DMTE4_IRQ       44
+#define DMTE5_IRQ       45
+#define DMTE6_IRQ       46
+#define DMTE7_IRQ       47
+#define DMAE_IRQ        38
+
+#ifdef CONFIG_CPU_SH4A
+#define SH_DMAC_BASE    0xfc808020
+
+#define CHCR_TS_MASK    0x18
+#define CHCR_TS_SHIFT   3
+
+#include <cpu/dma-sh7780.h>
+#else
+#define SH_DMAC_BASE    0xffa00000
+
+/* Definitions for the SuperH DMAC */
+#define TM_BURST        0x0000080
+#define TS_8            0x00000010
+#define TS_16           0x00000020
+#define TS_32           0x00000030
+#define TS_64           0x00000000
+
+#define CHCR_TS_MASK    0x70
+#define CHCR_TS_SHIFT   4
+
+#define DMAOR_COD       0x00000008
+
+/*
+ * The SuperH DMAC supports a number of transmit sizes, we list them here,
+ * with their respective values as they appear in the CHCR registers.
+ *
+ * Defaults to a 64-bit transfer size.
+ */
+enum {
+        XMIT_SZ_64BIT,
+        XMIT_SZ_8BIT,
+        XMIT_SZ_16BIT,
+        XMIT_SZ_32BIT,
+        XMIT_SZ_256BIT,
+};
+
+/*
+ * The DMA count is defined as the number of bytes to transfer.
+ */
+static unsigned int ts_shift[] __maybe_unused = {
+        [XMIT_SZ_64BIT]         = 3,
+        [XMIT_SZ_8BIT]          = 0,
+        [XMIT_SZ_16BIT]         = 1,
+        [XMIT_SZ_32BIT]         = 2,
+        [XMIT_SZ_256BIT]        = 5,
+};
+#endif
+
+#endif /* __ASM_CPU_SH4_DMA_H */
diff --git a/include/asm-sh/cpu-sh4/fpu.h b/arch/sh/include/cpu-sh4/cpu/fpu.h
index febef7342528..febef7342528 100644
--- a/include/asm-sh/cpu-sh4/fpu.h
+++ b/arch/sh/include/cpu-sh4/cpu/fpu.h
diff --git a/arch/sh/include/cpu-sh4/cpu/freq.h b/arch/sh/include/cpu-sh4/cpu/freq.h
new file mode 100644
index 000000000000..c23af81c2e70
--- /dev/null
+++ b/arch/sh/include/cpu-sh4/cpu/freq.h
@@ -0,0 +1,44 @@
+/*
+ * include/asm-sh/cpu-sh4/freq.h
+ *
+ * Copyright (C) 2002, 2003 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH4_FREQ_H
+#define __ASM_CPU_SH4_FREQ_H
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7722) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7723) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7343) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7366)
+#define FRQCR                   0xa4150000
+#define VCLKCR                  0xa4150004
+#define SCLKACR                 0xa4150008
+#define SCLKBCR                 0xa415000c
+#define IrDACLKCR               0xa4150010
+#define MSTPCR0                 0xa4150030
+#define MSTPCR1                 0xa4150034
+#define MSTPCR2                 0xa4150038
+#elif defined(CONFIG_CPU_SUBTYPE_SH7763) || \
+      defined(CONFIG_CPU_SUBTYPE_SH7780)
+#define FRQCR                   0xffc80000
+#elif defined(CONFIG_CPU_SUBTYPE_SH7785)
+#define FRQCR0                  0xffc80000
+#define FRQCR1                  0xffc80004
+#define FRQMR1                  0xffc80014
+#elif defined(CONFIG_CPU_SUBTYPE_SHX3)
+#define FRQCR                   0xffc00014
+#else
+#define FRQCR                   0xffc00000
+#define FRQCR_PSTBY             0x0200
+#define FRQCR_PLLEN             0x0400
+#define FRQCR_CKOEN             0x0800
+#endif
+#define MIN_DIVISOR_NR          0
+#define MAX_DIVISOR_NR          3
+
+#endif /* __ASM_CPU_SH4_FREQ_H */
+
diff --git a/include/asm-sh/cpu-sh4/mmu_context.h b/arch/sh/include/cpu-sh4/cpu/mmu_context.h
index 9ea8eb27b18e..9ea8eb27b18e 100644
--- a/include/asm-sh/cpu-sh4/mmu_context.h
+++ b/arch/sh/include/cpu-sh4/cpu/mmu_context.h
diff --git a/include/asm-sh/cpu-sh4/rtc.h b/arch/sh/include/cpu-sh4/cpu/rtc.h
index 25b1e6adfe8c..25b1e6adfe8c 100644
--- a/include/asm-sh/cpu-sh4/rtc.h
+++ b/arch/sh/include/cpu-sh4/cpu/rtc.h
diff --git a/include/asm-sh/cpu-sh4/sigcontext.h b/arch/sh/include/cpu-sh4/cpu/sigcontext.h
index ab392f120e06..ab392f120e06 100644
--- a/include/asm-sh/cpu-sh4/sigcontext.h
+++ b/arch/sh/include/cpu-sh4/cpu/sigcontext.h
diff --git a/include/asm-sh/cpu-sh4/sq.h b/arch/sh/include/cpu-sh4/cpu/sq.h
index 586d6491816a..586d6491816a 100644
--- a/include/asm-sh/cpu-sh4/sq.h
+++ b/arch/sh/include/cpu-sh4/cpu/sq.h
diff --git a/include/asm-sh/cpu-sh4/timer.h b/arch/sh/include/cpu-sh4/cpu/timer.h
index d1e796b96888..d1e796b96888 100644
--- a/include/asm-sh/cpu-sh4/timer.h
+++ b/arch/sh/include/cpu-sh4/cpu/timer.h
diff --git a/include/asm-sh/cpu-sh4/ubc.h b/arch/sh/include/cpu-sh4/cpu/ubc.h
index c86e17050935..c86e17050935 100644
--- a/include/asm-sh/cpu-sh4/ubc.h
+++ b/arch/sh/include/cpu-sh4/cpu/ubc.h
diff --git a/include/asm-sh/cpu-sh4/watchdog.h b/arch/sh/include/cpu-sh4/cpu/watchdog.h
index 259f6a0ce23d..259f6a0ce23d 100644
--- a/include/asm-sh/cpu-sh4/watchdog.h
+++ b/arch/sh/include/cpu-sh4/cpu/watchdog.h
diff --git a/include/asm-sh/cpu-sh5/addrspace.h b/arch/sh/include/cpu-sh5/cpu/addrspace.h
index dc36b9a03af6..dc36b9a03af6 100644
--- a/include/asm-sh/cpu-sh5/addrspace.h
+++ b/arch/sh/include/cpu-sh5/cpu/addrspace.h
diff --git a/include/asm-sh/cpu-sh5/cache.h b/arch/sh/include/cpu-sh5/cpu/cache.h
index ed050ab526f2..ed050ab526f2 100644
--- a/include/asm-sh/cpu-sh5/cache.h
+++ b/arch/sh/include/cpu-sh5/cpu/cache.h
diff --git a/include/asm-sh/cpu-sh5/cacheflush.h b/arch/sh/include/cpu-sh5/cpu/cacheflush.h
index 5a11f0b7e66a..5a11f0b7e66a 100644
--- a/include/asm-sh/cpu-sh5/cacheflush.h
+++ b/arch/sh/include/cpu-sh5/cpu/cacheflush.h
diff --git a/include/asm-sh/cpu-sh5/dma.h b/arch/sh/include/cpu-sh5/cpu/dma.h
index 7bf6bb3d35ed..7bf6bb3d35ed 100644
--- a/include/asm-sh/cpu-sh5/dma.h
+++ b/arch/sh/include/cpu-sh5/cpu/dma.h
diff --git a/include/asm-sh/cpu-sh5/irq.h b/arch/sh/include/cpu-sh5/cpu/irq.h
index f0f0756e6e84..f0f0756e6e84 100644
--- a/include/asm-sh/cpu-sh5/irq.h
+++ b/arch/sh/include/cpu-sh5/cpu/irq.h
diff --git a/include/asm-sh/cpu-sh5/mmu_context.h b/arch/sh/include/cpu-sh5/cpu/mmu_context.h
index 68a1d2cff457..68a1d2cff457 100644
--- a/include/asm-sh/cpu-sh5/mmu_context.h
+++ b/arch/sh/include/cpu-sh5/cpu/mmu_context.h
diff --git a/include/asm-sh/cpu-sh5/registers.h b/arch/sh/include/cpu-sh5/cpu/registers.h
index 6664ea6f1566..6664ea6f1566 100644
--- a/include/asm-sh/cpu-sh5/registers.h
+++ b/arch/sh/include/cpu-sh5/cpu/registers.h
diff --git a/include/asm-sh/cpu-sh5/rtc.h b/arch/sh/include/cpu-sh5/cpu/rtc.h
index 12ea0ed144e1..12ea0ed144e1 100644
--- a/include/asm-sh/cpu-sh5/rtc.h
+++ b/arch/sh/include/cpu-sh5/cpu/rtc.h
diff --git a/include/asm-sh/dreamcast/dma.h b/arch/sh/include/mach-dreamcast/mach/dma.h
index ddd68e788705..ddd68e788705 100644
--- a/include/asm-sh/dreamcast/dma.h
+++ b/arch/sh/include/mach-dreamcast/mach/dma.h
diff --git a/include/asm-sh/dreamcast/maple.h b/arch/sh/include/mach-dreamcast/mach/maple.h
index 51f6a87f1f11..51f6a87f1f11 100644
--- a/include/asm-sh/dreamcast/maple.h
+++ b/arch/sh/include/mach-dreamcast/mach/maple.h
diff --git a/arch/sh/include/mach-dreamcast/mach/pci.h b/arch/sh/include/mach-dreamcast/mach/pci.h
new file mode 100644
index 000000000000..75fc9009e092
--- /dev/null
+++ b/arch/sh/include/mach-dreamcast/mach/pci.h
@@ -0,0 +1,25 @@
+/*
+ * include/asm-sh/dreamcast/pci.h
+ *
+ * Copyright (C) 2001, 2002  M. R. Brown
+ * Copyright (C) 2002, 2003  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_SH_DREAMCAST_PCI_H
+#define __ASM_SH_DREAMCAST_PCI_H
+
+#include <mach-dreamcast/mach/sysasic.h>
+
+#define GAPSPCI_REGS            0x01001400
+#define GAPSPCI_DMA_BASE        0x01840000
+#define GAPSPCI_DMA_SIZE        32768
+#define GAPSPCI_BBA_CONFIG      0x01001600
+#define GAPSPCI_BBA_CONFIG_SIZE 0x2000
+
+#define GAPSPCI_IRQ             HW_EVENT_EXTERNAL
+
+#endif /* __ASM_SH_DREAMCAST_PCI_H */
+
diff --git a/include/asm-sh/dreamcast/sysasic.h b/arch/sh/include/mach-dreamcast/mach/sysasic.h
index f33426608a87..f33426608a87 100644
--- a/include/asm-sh/dreamcast/sysasic.h
+++ b/arch/sh/include/mach-dreamcast/mach/sysasic.h
diff --git a/include/asm-sh/landisk/gio.h b/arch/sh/include/mach-landisk/mach/gio.h
index 35d7368b718a..35d7368b718a 100644
--- a/include/asm-sh/landisk/gio.h
+++ b/arch/sh/include/mach-landisk/mach/gio.h
diff --git a/include/asm-sh/landisk/iodata_landisk.h b/arch/sh/include/mach-landisk/mach/iodata_landisk.h
index 6fb04ab38b9f..6fb04ab38b9f 100644
--- a/include/asm-sh/landisk/iodata_landisk.h
+++ b/arch/sh/include/mach-landisk/mach/iodata_landisk.h
diff --git a/arch/sh/include/mach-se/mach/se.h b/arch/sh/include/mach-se/mach/se.h
new file mode 100644
index 000000000000..eb23000e1bbe
--- /dev/null
+++ b/arch/sh/include/mach-se/mach/se.h
@@ -0,0 +1,99 @@
+#ifndef __ASM_SH_HITACHI_SE_H
+#define __ASM_SH_HITACHI_SE_H
+
+/*
+ * linux/include/asm-sh/hitachi_se.h
+ *
+ * Copyright (C) 2000  Kazumoto Kojima
+ *
+ * Hitachi SolutionEngine support
+ */
+
+/* Box specific addresses.  */
+
+#define PA_ROM          0x00000000      /* EPROM */
+#define PA_ROM_SIZE     0x00400000      /* EPROM size 4M byte */
+#define PA_FROM         0x01000000      /* EPROM */
+#define PA_FROM_SIZE    0x00400000      /* EPROM size 4M byte */
+#define PA_EXT1         0x04000000
+#define PA_EXT1_SIZE    0x04000000
+#define PA_EXT2         0x08000000
+#define PA_EXT2_SIZE    0x04000000
+#define PA_SDRAM        0x0c000000
+#define PA_SDRAM_SIZE   0x04000000
+
+#define PA_EXT4         0x12000000
+#define PA_EXT4_SIZE    0x02000000
+#define PA_EXT5         0x14000000
+#define PA_EXT5_SIZE    0x04000000
+#define PA_PCIC         0x18000000      /* MR-SHPC-01 PCMCIA */
+
+#define PA_83902        0xb0000000      /* DP83902A */
+#define PA_83902_IF     0xb0040000      /* DP83902A remote io port */
+#define PA_83902_RST    0xb0080000      /* DP83902A reset port */
+
+#define PA_SUPERIO      0xb0400000      /* SMC37C935A super io chip */
+#define PA_DIPSW0       0xb0800000      /* Dip switch 5,6 */
+#define PA_DIPSW1       0xb0800002      /* Dip switch 7,8 */
+#define PA_LED          0xb0c00000      /* LED */
+#if defined(CONFIG_CPU_SUBTYPE_SH7705)
+#define PA_BCR          0xb0e00000
+#else
+#define PA_BCR          0xb1400000      /* FPGA */
+#endif
+
+#define PA_MRSHPC       0xb83fffe0      /* MR-SHPC-01 PCMCIA controller */
+#define PA_MRSHPC_MW1   0xb8400000      /* MR-SHPC-01 memory window base */
+#define PA_MRSHPC_MW2   0xb8500000      /* MR-SHPC-01 attribute window base */
+#define PA_MRSHPC_IO    0xb8600000      /* MR-SHPC-01 I/O window base */
+#define MRSHPC_OPTION   (PA_MRSHPC + 6)
+#define MRSHPC_CSR      (PA_MRSHPC + 8)
+#define MRSHPC_ISR      (PA_MRSHPC + 10)
+#define MRSHPC_ICR      (PA_MRSHPC + 12)
+#define MRSHPC_CPWCR    (PA_MRSHPC + 14)
+#define MRSHPC_MW0CR1   (PA_MRSHPC + 16)
+#define MRSHPC_MW1CR1   (PA_MRSHPC + 18)
+#define MRSHPC_IOWCR1   (PA_MRSHPC + 20)
+#define MRSHPC_MW0CR2   (PA_MRSHPC + 22)
+#define MRSHPC_MW1CR2   (PA_MRSHPC + 24)
+#define MRSHPC_IOWCR2   (PA_MRSHPC + 26)
+#define MRSHPC_CDCR     (PA_MRSHPC + 28)
+#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30)
+
+#define BCR_ILCRA       (PA_BCR + 0)
+#define BCR_ILCRB       (PA_BCR + 2)
+#define BCR_ILCRC       (PA_BCR + 4)
+#define BCR_ILCRD       (PA_BCR + 6)
+#define BCR_ILCRE       (PA_BCR + 8)
+#define BCR_ILCRF       (PA_BCR + 10)
+#define BCR_ILCRG       (PA_BCR + 12)
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7705)
+#define IRQ_STNIC       12
+#define IRQ_CFCARD      14
+#else
+#define IRQ_STNIC       10
+#define IRQ_CFCARD      7
+#endif
+
+/* SH Ether support (SH7710/SH7712) */
+/* Base address */
+#define SH_ETH0_BASE 0xA7000000
+#define SH_ETH1_BASE 0xA7000400
+/* PHY ID */
+#if defined(CONFIG_CPU_SUBTYPE_SH7710)
+# define PHY_ID 0x00
+#elif defined(CONFIG_CPU_SUBTYPE_SH7712)
+# define PHY_ID 0x01
+#endif
+/* Ether IRQ */
+#define SH_ETH0_IRQ     80
+#define SH_ETH1_IRQ     81
+#define SH_TSU_IRQ      82
+
+void init_se_IRQ(void);
+
+#define __IO_PREFIX     se
+#include <asm/io_generic.h>
+
+#endif  /* __ASM_SH_HITACHI_SE_H */
diff --git a/include/asm-sh/se7206.h b/arch/sh/include/mach-se/mach/se7206.h
index 698eb80389ab..698eb80389ab 100644
--- a/include/asm-sh/se7206.h
+++ b/arch/sh/include/mach-se/mach/se7206.h
diff --git a/arch/sh/include/mach-se/mach/se7343.h b/arch/sh/include/mach-se/mach/se7343.h
new file mode 100644
index 000000000000..98458460e632
--- /dev/null
+++ b/arch/sh/include/mach-se/mach/se7343.h
@@ -0,0 +1,149 @@
+#ifndef __ASM_SH_HITACHI_SE7343_H
+#define __ASM_SH_HITACHI_SE7343_H
+
+/*
+ * include/asm-sh/se/se7343.h
+ *
+ * Copyright (C) 2003 Takashi Kusuda <kusuda-takashi@hitachi-ul.co.jp>
+ *
+ * SH-Mobile SolutionEngine 7343 support
+ */
+
+/* Box specific addresses.  */
+
+/* Area 0 */
+#define PA_ROM          0x00000000      /* EPROM */
+#define PA_ROM_SIZE     0x00400000      /* EPROM size 4M byte(Actually 2MB) */
+#define PA_FROM         0x00400000      /* Flash ROM */
+#define PA_FROM_SIZE    0x00400000      /* Flash size 4M byte */
+#define PA_SRAM         0x00800000      /* SRAM */
+#define PA_FROM_SIZE    0x00400000      /* SRAM size 4M byte */
+/* Area 1 */
+#define PA_EXT1         0x04000000
+#define PA_EXT1_SIZE    0x04000000
+/* Area 2 */
+#define PA_EXT2         0x08000000
+#define PA_EXT2_SIZE    0x04000000
+/* Area 3 */
+#define PA_SDRAM        0x0c000000
+#define PA_SDRAM_SIZE   0x04000000
+/* Area 4 */
+#define PA_PCIC         0x10000000      /* MR-SHPC-01 PCMCIA */
+#define PA_MRSHPC       0xb03fffe0      /* MR-SHPC-01 PCMCIA controller */
+#define PA_MRSHPC_MW1   0xb0400000      /* MR-SHPC-01 memory window base */
+#define PA_MRSHPC_MW2   0xb0500000      /* MR-SHPC-01 attribute window base */
+#define PA_MRSHPC_IO    0xb0600000      /* MR-SHPC-01 I/O window base */
+#define MRSHPC_OPTION   (PA_MRSHPC + 6)
+#define MRSHPC_CSR      (PA_MRSHPC + 8)
+#define MRSHPC_ISR      (PA_MRSHPC + 10)
+#define MRSHPC_ICR      (PA_MRSHPC + 12)
+#define MRSHPC_CPWCR    (PA_MRSHPC + 14)
+#define MRSHPC_MW0CR1   (PA_MRSHPC + 16)
+#define MRSHPC_MW1CR1   (PA_MRSHPC + 18)
+#define MRSHPC_IOWCR1   (PA_MRSHPC + 20)
+#define MRSHPC_MW0CR2   (PA_MRSHPC + 22)
+#define MRSHPC_MW1CR2   (PA_MRSHPC + 24)
+#define MRSHPC_IOWCR2   (PA_MRSHPC + 26)
+#define MRSHPC_CDCR     (PA_MRSHPC + 28)
+#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30)
+#define PA_LED          0xb0C00000      /* LED */
+#define LED_SHIFT       0
+#define PA_DIPSW        0xb0900000      /* Dip switch 31 */
+#define PA_CPLD_MODESET 0xb1400004      /* CPLD Mode set register */
+#define PA_CPLD_ST      0xb1400008      /* CPLD Interrupt status register */
+#define PA_CPLD_IMSK    0xb140000a      /* CPLD Interrupt mask register */
+/* Area 5 */
+#define PA_EXT5         0x14000000
+#define PA_EXT5_SIZE    0x04000000
+/* Area 6 */
+#define PA_LCD1         0xb8000000
+#define PA_LCD2         0xb8800000
+
+#define PORT_PACR       0xA4050100
+#define PORT_PBCR       0xA4050102
+#define PORT_PCCR       0xA4050104
+#define PORT_PDCR       0xA4050106
+#define PORT_PECR       0xA4050108
+#define PORT_PFCR       0xA405010A
+#define PORT_PGCR       0xA405010C
+#define PORT_PHCR       0xA405010E
+#define PORT_PJCR       0xA4050110
+#define PORT_PKCR       0xA4050112
+#define PORT_PLCR       0xA4050114
+#define PORT_PMCR       0xA4050116
+#define PORT_PNCR       0xA4050118
+#define PORT_PQCR       0xA405011A
+#define PORT_PRCR       0xA405011C
+#define PORT_PSCR       0xA405011E
+#define PORT_PTCR       0xA4050140
+#define PORT_PUCR       0xA4050142
+#define PORT_PVCR       0xA4050144
+#define PORT_PWCR       0xA4050146
+#define PORT_PYCR       0xA4050148
+#define PORT_PZCR       0xA405014A
+
+#define PORT_PSELA      0xA405014C
+#define PORT_PSELB      0xA405014E
+#define PORT_PSELC      0xA4050150
+#define PORT_PSELD      0xA4050152
+#define PORT_PSELE      0xA4050154
+
+#define PORT_HIZCRA     0xA4050156
+#define PORT_HIZCRB     0xA4050158
+#define PORT_HIZCRC     0xA405015C
+
+#define PORT_DRVCR      0xA4050180
+
+#define PORT_PADR       0xA4050120
+#define PORT_PBDR       0xA4050122
+#define PORT_PCDR       0xA4050124
+#define PORT_PDDR       0xA4050126
+#define PORT_PEDR       0xA4050128
+#define PORT_PFDR       0xA405012A
+#define PORT_PGDR       0xA405012C
+#define PORT_PHDR       0xA405012E
+#define PORT_PJDR       0xA4050130
+#define PORT_PKDR       0xA4050132
+#define PORT_PLDR       0xA4050134
+#define PORT_PMDR       0xA4050136
+#define PORT_PNDR       0xA4050138
+#define PORT_PQDR       0xA405013A
+#define PORT_PRDR       0xA405013C
+#define PORT_PTDR       0xA4050160
+#define PORT_PUDR       0xA4050162
+#define PORT_PVDR       0xA4050164
+#define PORT_PWDR       0xA4050166
+#define PORT_PYDR       0xA4050168
+
+#define FPGA_IN         0xb1400000
+#define FPGA_OUT        0xb1400002
+
+#define __IO_PREFIX     sh7343se
+#include <asm/io_generic.h>
+
+#define IRQ0_IRQ        32
+#define IRQ1_IRQ        33
+#define IRQ4_IRQ        36
+#define IRQ5_IRQ        37
+
+#define SE7343_FPGA_IRQ_MRSHPC0 0
+#define SE7343_FPGA_IRQ_MRSHPC1 1
+#define SE7343_FPGA_IRQ_MRSHPC2 2
+#define SE7343_FPGA_IRQ_MRSHPC3 3
+#define SE7343_FPGA_IRQ_SMC     6       /* EXT_IRQ2 */
+#define SE7343_FPGA_IRQ_USB     8
+
+#define SE7343_FPGA_IRQ_NR      11
+#define SE7343_FPGA_IRQ_BASE    120
+
+#define MRSHPC_IRQ3     (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC3)
+#define MRSHPC_IRQ2     (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC2)
+#define MRSHPC_IRQ1     (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC1)
+#define MRSHPC_IRQ0     (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC0)
+#define SMC_IRQ         (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_SMC)
+#define USB_IRQ         (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_USB)
+
+/* arch/sh/boards/se/7343/irq.c */
+void init_7343se_IRQ(void);
+
+#endif  /* __ASM_SH_HITACHI_SE7343_H */
diff --git a/include/asm-sh/se7721.h b/arch/sh/include/mach-se/mach/se7721.h
index b957f6041193..b957f6041193 100644
--- a/include/asm-sh/se7721.h
+++ b/arch/sh/include/mach-se/mach/se7721.h
diff --git a/arch/sh/include/mach-se/mach/se7722.h b/arch/sh/include/mach-se/mach/se7722.h
new file mode 100644
index 000000000000..e971d9a82f4a
--- /dev/null
+++ b/arch/sh/include/mach-se/mach/se7722.h
@@ -0,0 +1,112 @@
+#ifndef __ASM_SH_SE7722_H
+#define __ASM_SH_SE7722_H
+
+/*
+ * linux/include/asm-sh/se7722.h
+ *
+ * Copyright (C) 2007  Nobuhiro Iwamatsu
+ *
+ * Hitachi UL SolutionEngine 7722 Support.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#include <asm/addrspace.h>
+
+/* Box specific addresses.  */
+#define SE_AREA0_WIDTH  4               /* Area0: 32bit */
+#define PA_ROM          0xa0000000      /* EPROM */
+#define PA_ROM_SIZE     0x00200000      /* EPROM size 2M byte */
+#define PA_FROM         0xa1000000      /* Flash-ROM */
+#define PA_FROM_SIZE    0x01000000      /* Flash-ROM size 16M byte */
+#define PA_EXT1         0xa4000000
+#define PA_EXT1_SIZE    0x04000000
+#define PA_SDRAM        0xaC000000      /* DDR-SDRAM(Area3) 64MB */
+#define PA_SDRAM_SIZE   0x04000000
+
+#define PA_EXT4         0xb0000000
+#define PA_EXT4_SIZE    0x04000000
+
+#define PA_PERIPHERAL   0xB0000000
+
+#define PA_PCIC         PA_PERIPHERAL                   /* MR-SHPC-01 PCMCIA */
+#define PA_MRSHPC       (PA_PERIPHERAL + 0x003fffe0)    /* MR-SHPC-01 PCMCIA controller */
+#define PA_MRSHPC_MW1   (PA_PERIPHERAL + 0x00400000)    /* MR-SHPC-01 memory window base */
+#define PA_MRSHPC_MW2   (PA_PERIPHERAL + 0x00500000)    /* MR-SHPC-01 attribute window base */
+#define PA_MRSHPC_IO    (PA_PERIPHERAL + 0x00600000)    /* MR-SHPC-01 I/O window base */
+#define MRSHPC_OPTION   (PA_MRSHPC + 6)
+#define MRSHPC_CSR      (PA_MRSHPC + 8)
+#define MRSHPC_ISR      (PA_MRSHPC + 10)
+#define MRSHPC_ICR      (PA_MRSHPC + 12)
+#define MRSHPC_CPWCR    (PA_MRSHPC + 14)
+#define MRSHPC_MW0CR1   (PA_MRSHPC + 16)
+#define MRSHPC_MW1CR1   (PA_MRSHPC + 18)
+#define MRSHPC_IOWCR1   (PA_MRSHPC + 20)
+#define MRSHPC_MW0CR2   (PA_MRSHPC + 22)
+#define MRSHPC_MW1CR2   (PA_MRSHPC + 24)
+#define MRSHPC_IOWCR2   (PA_MRSHPC + 26)
+#define MRSHPC_CDCR     (PA_MRSHPC + 28)
+#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30)
+
+#define PA_LED          (PA_PERIPHERAL + 0x00800000)    /* 8bit LED */
+#define PA_FPGA         (PA_PERIPHERAL + 0x01800000)    /* FPGA base address */
+
+#define PA_LAN          (PA_AREA6_IO + 0)               /* SMC LAN91C111 */
+/* GPIO */
+#define FPGA_IN         0xb1840000UL
+#define FPGA_OUT        0xb1840004UL
+
+#define PORT_PECR       0xA4050108UL
+#define PORT_PJCR       0xA4050110UL
+#define PORT_PSELD      0xA4050154UL
+#define PORT_PSELB      0xA4050150UL
+
+#define PORT_PSELC      0xA4050152UL
+#define PORT_PKCR       0xA4050112UL
+#define PORT_PHCR       0xA405010EUL
+#define PORT_PLCR       0xA4050114UL
+#define PORT_PMCR       0xA4050116UL
+#define PORT_PRCR       0xA405011CUL
+#define PORT_PXCR       0xA4050148UL
+#define PORT_PSELA      0xA405014EUL
+#define PORT_PYCR       0xA405014AUL
+#define PORT_PZCR       0xA405014CUL
+#define PORT_HIZCRA     0xA4050158UL
+#define PORT_HIZCRC     0xA405015CUL
+
+/* IRQ */
+#define IRQ0_IRQ        32
+#define IRQ1_IRQ        33
+
+#define IRQ01_MODE      0xb1800000
+#define IRQ01_STS       0xb1800004
+#define IRQ01_MASK      0xb1800008
+
+/* Bits in IRQ01_* registers */
+
+#define SE7722_FPGA_IRQ_USB     0 /* IRQ0 */
+#define SE7722_FPGA_IRQ_SMC     1 /* IRQ0 */
+#define SE7722_FPGA_IRQ_MRSHPC0 2 /* IRQ1 */
+#define SE7722_FPGA_IRQ_MRSHPC1 3 /* IRQ1 */
+#define SE7722_FPGA_IRQ_MRSHPC2 4 /* IRQ1 */
+#define SE7722_FPGA_IRQ_MRSHPC3 5 /* IRQ1 */
+
+#define SE7722_FPGA_IRQ_NR      6
+#define SE7722_FPGA_IRQ_BASE    110
+
+#define MRSHPC_IRQ3     (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_MRSHPC3)
+#define MRSHPC_IRQ2     (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_MRSHPC2)
+#define MRSHPC_IRQ1     (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_MRSHPC1)
+#define MRSHPC_IRQ0     (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_MRSHPC0)
+#define SMC_IRQ         (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_SMC)
+#define USB_IRQ         (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_USB)
+
+/* arch/sh/boards/se/7722/irq.c */
+void init_se7722_IRQ(void);
+
+#define __IO_PREFIX             se7722
+#include <asm/io_generic.h>
+
+#endif  /* __ASM_SH_SE7722_H */
diff --git a/include/asm-sh/se7751.h b/arch/sh/include/mach-se/mach/se7751.h
index b36792ac5d66..b36792ac5d66 100644
--- a/include/asm-sh/se7751.h
+++ b/arch/sh/include/mach-se/mach/se7751.h
diff --git a/include/asm-sh/se7780.h b/arch/sh/include/mach-se/mach/se7780.h
index 40e9b41458cd..40e9b41458cd 100644
--- a/include/asm-sh/se7780.h
+++ b/arch/sh/include/mach-se/mach/se7780.h
diff --git a/include/asm-sh/sh03/io.h b/arch/sh/include/mach-sh03/mach/io.h
index c39c785bba94..c39c785bba94 100644
--- a/include/asm-sh/sh03/io.h
+++ b/arch/sh/include/mach-sh03/mach/io.h
diff --git a/include/asm-sh/sh03/sh03.h b/arch/sh/include/mach-sh03/mach/sh03.h
index 19c40b80428d..19c40b80428d 100644
--- a/include/asm-sh/sh03/sh03.h
+++ b/arch/sh/include/mach-sh03/mach/sh03.h
diff --git a/arch/sh/kernel/.gitignore b/arch/sh/kernel/.gitignore
new file mode 100644
index 000000000000..c5f676c3c224
--- /dev/null
+++ b/arch/sh/kernel/.gitignore
@@ -0,0 +1 @@
+vmlinux.lds
diff --git a/arch/sh/kernel/Makefile_32 b/arch/sh/kernel/Makefile_32
index 4bbdce36b92b..0e6905fe9fec 100644
--- a/arch/sh/kernel/Makefile_32
+++ b/arch/sh/kernel/Makefile_32
@@ -21,7 +21,7 @@ obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
 obj-$(CONFIG_CRASH_DUMP)        += crash_dump.o
 obj-$(CONFIG_PM)                += pm.o
 obj-$(CONFIG_STACKTRACE)        += stacktrace.o
-obj-$(CONFIG_BINFMT_ELF)        += dump_task.o
+obj-$(CONFIG_ELF_CORE)          += dump_task.o
 obj-$(CONFIG_IO_TRAPPED)        += io_trapped.o
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/sh/kernel/cf-enabler.c b/arch/sh/kernel/cf-enabler.c
index 01ff4d05aab0..bea40339919b 100644
--- a/arch/sh/kernel/cf-enabler.c
+++ b/arch/sh/kernel/cf-enabler.c
@@ -80,11 +80,11 @@ static int __init cf_init_default(void)
 }
 
 #if defined(CONFIG_SH_SOLUTION_ENGINE)
-#include <asm/se.h>
+#include <mach-se/mach/se.h>
 #elif defined(CONFIG_SH_7722_SOLUTION_ENGINE)
-#include <asm/se7722.h>
+#include <mach-se/mach/se7722.h>
 #elif defined(CONFIG_SH_7721_SOLUTION_ENGINE)
-#include <asm/se7721.h>
+#include <mach-se/mach/se7721.h>
 #endif
 
 /*
@@ -157,7 +157,7 @@ static int __init cf_init_se(void)
 }
 #endif
 
-int __init cf_init(void)
+static int __init cf_init(void)
 {
         if (mach_is_se() || mach_is_7722se() || mach_is_7721se())
                 return cf_init_se();
diff --git a/arch/sh/kernel/cpu/clock.c b/arch/sh/kernel/cpu/clock.c
index b5f1e23ed57c..f5eb56e6bc59 100644
--- a/arch/sh/kernel/cpu/clock.c
+++ b/arch/sh/kernel/cpu/clock.c
@@ -88,7 +88,7 @@ static void propagate_rate(struct clk *clk)
         }
 }
 
-int __clk_enable(struct clk *clk)
+static int __clk_enable(struct clk *clk)
 {
         /*
          * See if this is the first time we're enabling the clock, some
@@ -111,7 +111,6 @@ int __clk_enable(struct clk *clk)
 
         return 0;
 }
-EXPORT_SYMBOL_GPL(__clk_enable);
 
 int clk_enable(struct clk *clk)
 {
@@ -131,7 +130,7 @@ static void clk_kref_release(struct kref *kref)
         /* Nothing to do */
 }
 
-void __clk_disable(struct clk *clk)
+static void __clk_disable(struct clk *clk)
 {
         int count = kref_put(&clk->kref, clk_kref_release);
 
@@ -143,7 +142,6 @@ void __clk_disable(struct clk *clk)
                         clk->ops->disable(clk);
         }
 }
-EXPORT_SYMBOL_GPL(__clk_disable);
 
 void clk_disable(struct clk *clk)
 {
@@ -310,15 +308,11 @@ static int show_clocks(char *buf, char **start, off_t off,
         list_for_each_entry_reverse(clk, &clock_list, node) {
                 unsigned long rate = clk_get_rate(clk);
 
-                /*
-                 * Don't bother listing dummy clocks with no ancestry
-                 * that only support enable and disable ops.
-                 */
-                if (unlikely(!rate && !clk->parent))
-                        continue;
-
-                p += sprintf(p, "%-12s\t: %ld.%02ldMHz\n", clk->name,
-                             rate / 1000000, (rate % 1000000) / 10000);
+                p += sprintf(p, "%-12s\t: %ld.%02ldMHz\t%s\n", clk->name,
+                             rate / 1000000, (rate % 1000000) / 10000,
+                             ((clk->flags & CLK_ALWAYS_ENABLED) ||
+                              (atomic_read(&clk->kref.refcount) != 1)) ?
+                             "enabled" : "disabled");
         }
 
         return p - buf;
diff --git a/arch/sh/kernel/cpu/irq/intc-sh5.c b/arch/sh/kernel/cpu/irq/intc-sh5.c
index 79baa47af977..726f0335da76 100644
--- a/arch/sh/kernel/cpu/irq/intc-sh5.c
+++ b/arch/sh/kernel/cpu/irq/intc-sh5.c
@@ -20,7 +20,7 @@
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/bitops.h>
-#include <asm/cpu/irq.h>
+#include <cpu/irq.h>
 #include <asm/page.h>
 
 /*
diff --git a/arch/sh/kernel/cpu/irq/intc.c b/arch/sh/kernel/cpu/irq/intc.c
index da5dae787888..8c70e201bde0 100644
--- a/arch/sh/kernel/cpu/irq/intc.c
+++ b/arch/sh/kernel/cpu/irq/intc.c
@@ -62,7 +62,7 @@ struct intc_desc_int {
 #endif
 
 static unsigned int intc_prio_level[NR_IRQS]; /* for now */
-#ifdef CONFIG_CPU_SH3
+#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A)
 static unsigned long ack_handle[NR_IRQS];
 #endif
 
@@ -231,7 +231,7 @@ static void intc_disable(unsigned int irq)
         }
 }
 
-#ifdef CONFIG_CPU_SH3
+#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A)
 static void intc_mask_ack(unsigned int irq)
 {
         struct intc_desc_int *d = get_intc_desc(irq);
@@ -244,8 +244,23 @@ static void intc_mask_ack(unsigned int irq)
 
         if (handle) {
                 addr = INTC_REG(d, _INTC_ADDR_D(handle), 0);
-                ctrl_inb(addr);
-                ctrl_outb(0x3f ^ set_field(0, 1, handle), addr);
+                switch (_INTC_FN(handle)) {
+                case REG_FN_MODIFY_BASE + 0:    /* 8bit */
+                        ctrl_inb(addr);
+                        ctrl_outb(0xff ^ set_field(0, 1, handle), addr);
+                        break;
+                case REG_FN_MODIFY_BASE + 1:    /* 16bit */
+                        ctrl_inw(addr);
+                        ctrl_outw(0xffff ^ set_field(0, 1, handle), addr);
+                        break;
+                case REG_FN_MODIFY_BASE + 3:    /* 32bit */
+                        ctrl_inl(addr);
+                        ctrl_outl(0xffffffff ^ set_field(0, 1, handle), addr);
+                        break;
+                default:
+                        BUG();
+                        break;
+                }
         }
 }
 #endif
@@ -466,7 +481,7 @@ static unsigned int __init intc_prio_data(struct intc_desc *desc,
         return 0;
 }
 
-#ifdef CONFIG_CPU_SH3
+#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A)
 static unsigned int __init intc_ack_data(struct intc_desc *desc,
                                           struct intc_desc_int *d,
                                           intc_enum enum_id)
@@ -601,7 +616,7 @@ static void __init intc_register_irq(struct intc_desc *desc,
         /* irq should be disabled by default */
         d->chip.mask(irq);
 
-#ifdef CONFIG_CPU_SH3
+#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A)
         if (desc->ack_regs)
                 ack_handle[irq] = intc_ack_data(desc, d, enum_id);
 #endif
@@ -635,7 +650,7 @@ void __init register_intc_controller(struct intc_desc *desc)
         d->nr_reg += desc->prio_regs ? desc->nr_prio_regs * 2 : 0;
         d->nr_reg += desc->sense_regs ? desc->nr_sense_regs : 0;
 
-#ifdef CONFIG_CPU_SH3
+#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A)
         d->nr_reg += desc->ack_regs ? desc->nr_ack_regs : 0;
 #endif
         d->reg = alloc_bootmem(d->nr_reg * sizeof(*d->reg));
@@ -676,7 +691,7 @@ void __init register_intc_controller(struct intc_desc *desc)
         d->chip.mask_ack = intc_disable;
         d->chip.set_type = intc_set_sense;
 
-#ifdef CONFIG_CPU_SH3
+#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A)
         if (desc->ack_regs) {
                 for (i = 0; i < desc->nr_ack_regs; i++)
                         k += save_reg(d, k, desc->ack_regs[i].set_reg, 0);
diff --git a/arch/sh/kernel/cpu/sh2/entry.S b/arch/sh/kernel/cpu/sh2/entry.S
index 0fc89069d8c7..becc54c45692 100644
--- a/arch/sh/kernel/cpu/sh2/entry.S
+++ b/arch/sh/kernel/cpu/sh2/entry.S
@@ -3,7 +3,7 @@
  *
  * The SH-2 exception entry
  *
- * Copyright (C) 2005,2006 Yoshinori Sato
+ * Copyright (C) 2005-2008 Yoshinori Sato
  * Copyright (C) 2005  AXE,Inc.
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -14,7 +14,7 @@
 #include <linux/linkage.h>
 #include <asm/asm-offsets.h>
 #include <asm/thread_info.h>
-#include <asm/cpu/mmu_context.h>
+#include <cpu/mmu_context.h>
 #include <asm/unistd.h>
 #include <asm/errno.h>
 #include <asm/page.h>
@@ -36,43 +36,41 @@ OFF_TRA	=  (16*4+6*4)
 #include <asm/entry-macros.S>
 
 ENTRY(exception_handler)
-        ! already saved r0/r1
+        ! stack
+        ! r0 <- point sp
+        ! r1
+        ! pc
+        ! sr
+        ! r0 = temporary
+        ! r1 = vector (pseudo EXPEVT / INTEVT / TRA)
         mov.l   r2,@-sp
         mov.l   r3,@-sp
-        mov     r0,r1
         cli
         mov.l   $cpu_mode,r2
         mov.l   @r2,r0
         mov.l   @(5*4,r15),r3   ! previous SR
-        shll2   r3              ! set "S" flag
-        rotl    r0              ! T <- "S" flag
-        rotl    r0              ! "S" flag is LSB
-        rotcr   r3              ! T -> r3:b30
-        shlr    r3
-        shlr    r0
-        bt/s    1f
-         mov.l  r3,@(5*4,r15)   ! copy cpu mode to SR
+        or      r0,r3           ! set MD
+        tst     r0,r0
+        bf/s    1f              ! previous mode check
+         mov.l  r3,@(5*4,r15)   ! update SR
         ! switch to kernel mode
-        mov     #1,r0
-        rotr    r0
-        rotr    r0
+        mov.l   __md_bit,r0
         mov.l   r0,@r2          ! enter kernel mode
         mov.l   $current_thread_info,r2
         mov.l   @r2,r2
-        mov     #0x20,r0
+        mov     #(THREAD_SIZE >> 8),r0
         shll8   r0
         add     r2,r0
         mov     r15,r2          ! r2 = user stack top
         mov     r0,r15          ! switch kernel stack
-        add     #-4,r15         ! dummy
         mov.l   r1,@-r15        ! TRA
         sts.l   macl, @-r15
         sts.l   mach, @-r15
         stc.l   gbr, @-r15
-        mov.l   @(4*4,r2),r0
-        mov.l   @(5*4,r2),r1
-        mov.l   r1,@-r15        ! original SR
+        mov.l   @(5*4,r2),r0
+        mov.l   r0,@-r15        ! original SR
         sts.l   pr,@-r15
+        mov.l   @(4*4,r2),r0
         mov.l   r0,@-r15        ! original PC
         mov     r2,r3
         add     #(4+2)*4,r3     ! rewind r0 - r3 + exception frame
@@ -88,14 +86,15 @@ ENTRY(exception_handler)
         mov.l   r6,@-r15
         mov.l   r5,@-r15
         mov.l   r4,@-r15
+        mov     r1,r9           ! save TRA
         mov     r2,r8           ! copy user -> kernel stack
-        mov.l   @r8+,r3
+        mov.l   @(0,r8),r3
         mov.l   r3,@-r15
-        mov.l   @r8+,r2
+        mov.l   @(4,r8),r2
         mov.l   r2,@-r15
-        mov.l   @r8+,r1
+        mov.l   @(12,r8),r1
         mov.l   r1,@-r15
-        mov.l   @r8+,r0
+        mov.l   @(8,r8),r0
         bra     2f
          mov.l  r0,@-r15
 1:
@@ -107,10 +106,11 @@ ENTRY(exception_handler)
         mov.l   r0,@-r15        
         mov.l   @r2+,r0         ! old R2
         mov.l   r0,@-r15        
-        mov.l   @r2+,r0         ! old R1
-        mov.l   r0,@-r15        
-        mov.l   @r2+,r0         ! old R0
+        mov.l   @(4,r2),r0      ! old R1
         mov.l   r0,@-r15        
+        mov.l   @r2,r0          ! old R0
+        mov.l   r0,@-r15
+        add     #8,r2
         mov.l   @r2+,r3         ! old PC
         mov.l   @r2+,r0         ! old SR
         add     #-4,r2          ! exception frame stub (sr)
@@ -135,14 +135,12 @@ ENTRY(exception_handler)
         mov.l   r6,@-r2
         mov.l   r5,@-r2
         mov.l   r4,@-r2
+        mov     r1,r9
         mov.l   @(OFF_R0,r15),r0
         mov.l   @(OFF_R1,r15),r1
         mov.l   @(OFF_R2,r15),r2
         mov.l   @(OFF_R3,r15),r3
 2:
-        mov     #OFF_TRA,r8
-        add     r15,r8
-        mov.l   @r8,r9  
         mov     #64,r8
         cmp/hs  r8,r9
         bt      interrupt_entry ! vec >= 64 is interrupt
@@ -150,26 +148,14 @@ ENTRY(exception_handler)
         cmp/hs  r8,r9
         bt      trap_entry      ! 64 > vec >= 32  is trap
 
-#if defined(CONFIG_SH_FPU)
-        mov     #13,r8
-        cmp/eq  r8,r9
-        bt      10f             ! fpu
-        nop
-#endif
-
         mov.l   4f,r8
         mov     r9,r4
         shll2   r9
         add     r9,r8
-        mov.l   @r8,r8
-        mov     #0,r9
-        cmp/eq  r9,r8
+        mov.l   @r8,r8          ! exception handler address
+        tst     r8,r8
         bf      3f
         mov.l   8f,r8           ! unhandled exception
-#if defined(CONFIG_SH_FPU)
-10:
-        mov.l   9f, r8          ! unhandled exception
-#endif
 3:
         mov.l   5f,r10
         jmp     @r8
@@ -188,10 +174,7 @@ interrupt_entry:
 5:      .long   ret_from_exception
 6:      .long   ret_from_irq
 7:      .long   do_IRQ
-8:      .long   do_exception_error
-#ifdef CONFIG_SH_FPU
-9:      .long   fpu_error_trap_handler
-#endif
+8:      .long   exception_error
 
 trap_entry:
         mov     #0x30,r8
@@ -200,24 +183,9 @@ trap_entry:
         add     #-0x10,r9       ! convert SH2 to SH3/4 ABI
 1:      
         shll2   r9                      ! TRA
-        mov     #OFF_TRA,r8
-        add     r15,r8
-        mov.l   r9,@r8
-        mov     r9,r8
-#ifdef CONFIG_TRACE_IRQFLAGS
-        mov.l   2f, r9
-        jsr     @r9
-         nop
-#endif
-        sti
-        bra     system_call
-         nop
+        bra     system_call     ! jump common systemcall entry
+         mov    r9,r8
         
-        .align  2
-#ifdef CONFIG_TRACE_IRQFLAGS
-2:      .long   trace_hardirqs_on
-#endif
-
 #if defined(CONFIG_SH_STANDARD_BIOS)
         /* Unwind the stack and jmp to the debug entry */
 ENTRY(sh_bios_handler)
@@ -240,7 +208,7 @@ ENTRY(sh_bios_handler)
         mov.l   @r2,r2
         stc     sr,r3
         mov.l   r2,@r0
-        mov.l   r3,@r0
+        mov.l   r3,@(4,r0)
         mov.l   r1,@(8,r0)      
         mov.l   @r15+, r0
         mov.l   @r15+, r1
@@ -272,22 +240,30 @@ ENTRY(address_error_trap_handler)
         mov.l   1f,r0
         jmp     @r0
          mov    #0,r5                           ! writeaccess is unknown
-        .align  2
 
+        .align  2
 1:      .long   do_address_error
 
 restore_all:
-        cli
-#ifdef CONFIG_TRACE_IRQFLAGS
-        mov.l   1f, r0
-        jsr     @r0
-         nop
-#endif
+        stc     sr,r0
+        or      #0xf0,r0
+        ldc     r0,sr                           ! all interrupt block (same BL = 1)
+        ! restore special register
+        ! overlap exception frame
+        mov     r15,r0
+        add     #17*4,r0
+        lds.l   @r0+,pr
+        add     #4,r0
+        ldc.l   @r0+,gbr
+        lds.l   @r0+,mach
+        lds.l   @r0+,macl
         mov     r15,r0
         mov.l   $cpu_mode,r2
         mov     #OFF_SR,r3
         mov.l   @(r0,r3),r1
-        mov.l   r1,@r2
+        mov.l   __md_bit,r3
+        and     r1,r3                           ! copy MD bit
+        mov.l   r3,@r2
         shll2   r1                              ! clear MD bit
         shlr2   r1
         mov.l   @(OFF_SP,r0),r2
@@ -297,12 +273,6 @@ restore_all:
         mov     #OFF_PC,r3
         mov.l   @(r0,r3),r1
         mov.l   r1,@r2                          ! set pc
-        add     #4*16+4,r0
-        lds.l   @r0+,pr
-        add     #4,r0                           ! skip sr
-        ldc.l   @r0+,gbr
-        lds.l   @r0+,mach
-        lds.l   @r0+,macl
         get_current_thread_info r0, r1
         mov.l   $current_thread_info,r1
         mov.l   r0,@r1
@@ -326,9 +296,8 @@ restore_all:
          nop
 
         .align 2
-#ifdef CONFIG_TRACE_IRQFLAGS
-1:     .long   trace_hardirqs_off
-#endif
+__md_bit:
+        .long   0x40000000
 $current_thread_info:
         .long   __current_thread_info
 $cpu_mode:      
diff --git a/arch/sh/kernel/cpu/sh2/ex.S b/arch/sh/kernel/cpu/sh2/ex.S
index 6d285af7846c..85b0bf81fc1d 100644
--- a/arch/sh/kernel/cpu/sh2/ex.S
+++ b/arch/sh/kernel/cpu/sh2/ex.S
@@ -18,16 +18,17 @@
 exception_entry:        
 no      =       0
         .rept   256
-        mov.l   r0,@-sp
-        mov     #no,r0
+        mov.l   r1,@-sp
         bra     exception_trampoline
-        and     #0xff,r0
+        mov     #no,r1
 no      =       no + 1
         .endr
 exception_trampoline:
-        mov.l   r1,@-sp
-        mov.l   $exception_handler,r1
-        jmp     @r1
+        mov.l   r0,@-sp
+        mov.l   $exception_handler,r0
+        extu.b  r1,r1
+        jmp     @r0
+          extu.w        r1,r1
 
         .align  2
 $exception_entry:
@@ -41,6 +42,6 @@ $exception_handler:
 ENTRY(vbr_base)
 vector  =       0
         .rept   256
-        .long   exception_entry + vector * 8
+        .long   exception_entry + vector * 6
 vector  =       vector + 1
         .endr
diff --git a/arch/sh/kernel/cpu/sh2/setup-sh7619.c b/arch/sh/kernel/cpu/sh2/setup-sh7619.c
index cc530f4d84d6..56e5878e5516 100644
--- a/arch/sh/kernel/cpu/sh2/setup-sh7619.c
+++ b/arch/sh/kernel/cpu/sh2/setup-sh7619.c
@@ -96,8 +96,32 @@ static struct platform_device sci_device = {
         },
 };
 
+static struct resource eth_resources[] = {
+        [0] = {
+                .start = 0xfb000000,
+                .end =   0xfb0001c8,
+                .flags = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start = 85,
+                .end = 85,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device eth_device = {
+        .name = "sh-eth",
+        .id     = -1,
+        .dev = {
+                .platform_data = (void *)1,
+        },
+        .num_resources = ARRAY_SIZE(eth_resources),
+        .resource = eth_resources,
+};
+
 static struct platform_device *sh7619_devices[] __initdata = {
         &sci_device,
+        &eth_device,
 };
 
 static int __init sh7619_devices_setup(void)
diff --git a/arch/sh/kernel/cpu/sh2a/Makefile b/arch/sh/kernel/cpu/sh2a/Makefile
index 7e2b90cfa7bf..1ab1ecf4c768 100644
--- a/arch/sh/kernel/cpu/sh2a/Makefile
+++ b/arch/sh/kernel/cpu/sh2a/Makefile
@@ -4,7 +4,7 @@
 
 obj-y   := common.o probe.o opcode_helper.o
 
-common-y        += $(addprefix ../sh2/, ex.o entry.o)
+common-y        += ex.o entry.o
 
 obj-$(CONFIG_SH_FPU)    += fpu.o
 
diff --git a/arch/sh/kernel/cpu/sh2a/entry.S b/arch/sh/kernel/cpu/sh2a/entry.S
new file mode 100644
index 000000000000..ab3903eeda5c
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh2a/entry.S
@@ -0,0 +1,249 @@
+/*
+ * arch/sh/kernel/cpu/sh2a/entry.S
+ *
+ * The SH-2A exception entry
+ *
+ * Copyright (C) 2008 Yoshinori Sato
+ * Based on arch/sh/kernel/cpu/sh2/entry.S
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/thread_info.h>
+#include <cpu/mmu_context.h>
+#include <asm/unistd.h>
+#include <asm/errno.h>
+#include <asm/page.h>
+        
+/* Offsets to the stack */
+OFF_R0  =  0            /* Return value. New ABI also arg4 */
+OFF_R1  =  4            /* New ABI: arg5 */
+OFF_R2  =  8            /* New ABI: arg6 */
+OFF_R3  =  12           /* New ABI: syscall_nr */
+OFF_R4  =  16           /* New ABI: arg0 */
+OFF_R5  =  20           /* New ABI: arg1 */
+OFF_R6  =  24           /* New ABI: arg2 */
+OFF_R7  =  28           /* New ABI: arg3 */
+OFF_SP  =  (15*4)
+OFF_PC  =  (16*4)
+OFF_SR  =  (16*4+2*4)
+OFF_TRA =  (16*4+6*4)
+
+#include <asm/entry-macros.S>
+
+ENTRY(exception_handler)
+        ! stack
+        ! r0 <- point sp
+        ! r1
+        ! pc
+        ! sr
+        ! r0 = temporary
+        ! r1 = vector (pseudo EXPEVT / INTEVT / TRA)
+        mov.l   r2,@-sp
+        cli
+        mov.l   $cpu_mode,r2
+        bld.b   #6,@(0,r2)      !previus SR.MD
+        bst.b   #6,@(4*4,r15)   !set cpu mode to SR.MD
+        bt      1f
+        ! switch to kernel mode
+        bset.b  #6,@(0,r2)      !set SR.MD
+        mov.l   $current_thread_info,r2
+        mov.l   @r2,r2
+        mov     #(THREAD_SIZE >> 8),r0
+        shll8   r0
+        add     r2,r0           ! r0 = kernel stack tail
+        mov     r15,r2          ! r2 = user stack top
+        mov     r0,r15          ! switch kernel stack
+        mov.l   r1,@-r15        ! TRA
+        sts.l   macl, @-r15
+        sts.l   mach, @-r15
+        stc.l   gbr, @-r15
+        mov.l   @(4*4,r2),r0
+        mov.l   r0,@-r15        ! original SR
+        sts.l   pr,@-r15
+        mov.l   @(3*4,r2),r0
+        mov.l   r0,@-r15        ! original PC
+        mov     r2,r0
+        add     #(3+2)*4,r0     ! rewind r0 - r3 + exception frame
+        lds     r0,pr           ! pr = original SP
+        movmu.l r3,@-r15        ! save regs
+        mov     r2,r8           ! r8 =  previus stack top
+        mov     r1,r9           ! r9 = interrupt vector
+        ! restore previous stack
+        mov.l   @r8+,r2
+        mov.l   @r8+,r0
+        mov.l   @r8+,r1
+        bra     2f
+         movml.l r2,@-r15
+1:
+        ! in kernel exception
+        mov     r15,r2
+        add     #-((OFF_TRA + 4) - OFF_PC) + 5*4,r15
+        movmu.l r3,@-r15
+        mov     r2,r8           ! r8 = previous stack top
+        mov     r1,r9           ! r9 = interrupt vector
+        ! restore exception frame & regs
+        mov.l   @r8+,r2         ! old R2
+        mov.l   @r8+,r0         ! old R0
+        mov.l   @r8+,r1         ! old R1
+        mov.l   @r8+,r10        ! old PC
+        mov.l   @r8+,r11        ! old SR
+        movml.l r2,@-r15
+        mov.l   r10,@(OFF_PC,r15)
+        mov.l   r11,@(OFF_SR,r15)
+        mov.l   r8,@(OFF_SP,r15)        ! save old sp
+        mov     r15,r8
+        add     #OFF_TRA + 4,r8
+        mov.l   r9,@-r8
+        sts.l   macl,@-r8
+        sts.l   mach,@-r8
+        stc.l   gbr,@-r8
+        add     #-4,r8
+        sts.l   pr,@-r8
+2:
+        ! dispatch exception / interrupt
+        mov     #64,r8
+        cmp/hs  r8,r9
+        bt      interrupt_entry ! vec >= 64 is interrupt
+        mov     #32,r8
+        cmp/hs  r8,r9
+        bt      trap_entry      ! 64 > vec >= 32  is trap
+
+        mov.l   4f,r8
+        mov     r9,r4
+        shll2   r9
+        add     r9,r8
+        mov.l   @r8,r8          ! exception handler address
+        tst     r8,r8
+        bf      3f
+        mov.l   8f,r8           ! unhandled exception
+3:
+        mov.l   5f,r10
+        jmp     @r8
+         lds    r10,pr
+
+interrupt_entry:
+        mov     r9,r4
+        mov     r15,r5
+        mov.l   7f,r8
+        mov.l   6f,r9
+        jmp     @r8
+         lds    r9,pr
+
+        .align  2
+4:      .long   exception_handling_table
+5:      .long   ret_from_exception
+6:      .long   ret_from_irq
+7:      .long   do_IRQ
+8:      .long   exception_error
+
+trap_entry:
+        mov     #0x30,r8
+        cmp/ge  r8,r9           ! vector 0x20-0x2f is systemcall
+        bt      1f
+        add     #-0x10,r9       ! convert SH2 to SH3/4 ABI
+1:      
+        shll2   r9                      ! TRA
+        bra     system_call     ! jump common systemcall entry
+         mov    r9,r8
+        
+#if defined(CONFIG_SH_STANDARD_BIOS)
+        /* Unwind the stack and jmp to the debug entry */
+ENTRY(sh_bios_handler)
+        mov     r15,r0
+        add     #(22-4)*4-4,r0
+        ldc.l   @r0+,gbr
+        lds.l   @r0+,mach
+        lds.l   @r0+,macl
+        mov     r15,r0
+        mov.l   @(OFF_SP,r0),r1
+        mov.l   @(OFF_SR,r2),r3
+        mov.l   r3,@-r1
+        mov.l   @(OFF_SP,r2),r3
+        mov.l   r3,@-r1
+        mov     r15,r0
+        add     #(22-4)*4-8,r0
+        mov.l   1f,r2
+        mov.l   @r2,r2
+        stc     sr,r3
+        mov.l   r2,@r0
+        mov.l   r3,@(4,r0)
+        mov.l   r1,@(8,r0)
+        movml.l @r15+,r14
+        add     #8,r15
+        lds.l   @r15+, pr
+        rte
+         mov.l  @r15+,r15
+        .align  2
+1:      .long   gdb_vbr_vector
+#endif /* CONFIG_SH_STANDARD_BIOS */
+
+ENTRY(address_error_trap_handler)
+        mov     r15,r4                          ! regs
+        mov.l   @(OFF_PC,r15),r6                ! pc
+        mov.l   1f,r0
+        jmp     @r0
+         mov    #0,r5                           ! writeaccess is unknown
+
+        .align  2
+1:      .long   do_address_error
+
+restore_all:
+        stc     sr,r0
+        or      #0xf0,r0
+        ldc     r0,sr                           ! all interrupt block (same BL = 1)
+        ! restore special register
+        ! overlap exception frame
+        mov     r15,r0
+        add     #17*4,r0
+        lds.l   @r0+,pr
+        add     #4,r0
+        ldc.l   @r0+,gbr
+        lds.l   @r0+,mach
+        lds.l   @r0+,macl
+        mov     r15,r0
+        mov.l   $cpu_mode,r2
+        bld.b   #6,@(OFF_SR,r15)
+        bst.b   #6,@(0,r2)                      ! save CPU mode
+        mov.l   @(OFF_SR,r0),r1
+        shll2   r1
+        shlr2   r1                              ! clear MD bit
+        mov.l   @(OFF_SP,r0),r2
+        add     #-8,r2
+        mov.l   r2,@(OFF_SP,r0)                 ! point exception frame top
+        mov.l   r1,@(4,r2)                      ! set sr
+        mov.l   @(OFF_PC,r0),r1
+        mov.l   r1,@r2                          ! set pc
+        get_current_thread_info r0, r1
+        mov.l   $current_thread_info,r1
+        mov.l   r0,@r1
+        movml.l @r15+,r14
+        mov.l   @r15,r15
+        rte
+         nop
+
+        .align 2
+$current_thread_info:
+        .long   __current_thread_info
+$cpu_mode:      
+        .long   __cpu_mode
+                
+! common exception handler
+#include "../../entry-common.S"
+        
+        .data
+! cpu operation mode 
+! bit30 = MD (compatible SH3/4)
+__cpu_mode:
+        .long   0x40000000
+                
+        .section        .bss
+__current_thread_info:
+        .long   0
+
+ENTRY(exception_handling_table)
+        .space  4*32
diff --git a/arch/sh/kernel/cpu/sh2a/ex.S b/arch/sh/kernel/cpu/sh2a/ex.S
new file mode 100644
index 000000000000..3ead9e63965a
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh2a/ex.S
@@ -0,0 +1,72 @@
+/*
+ * arch/sh/kernel/cpu/sh2a/ex.S
+ *
+ * The SH-2A exception vector table
+ *
+ * Copyright (C) 2008 Yoshinori Sato
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/linkage.h>
+
+!
+! convert Exception Vector to Exception Number
+!
+
+! exception no 0 to 255
+exception_entry0:
+no      =       0
+        .rept   256
+        mov.l   r1,@-sp
+        bra     exception_trampoline0
+        mov     #no,r1
+no      =       no + 1
+        .endr
+exception_trampoline0:
+        mov.l   r0,@-sp
+        mov.l   1f,r0
+        extu.b  r1,r1
+        jmp     @r0
+          extu.w        r1,r1
+         
+        .align  2
+1:      .long   exception_handler
+
+! exception no 256 to 511
+exception_entry1:
+no      =       0
+        .rept   256
+        mov.l   r1,@-sp
+        bra     exception_trampoline1
+        mov     #no,r1
+no      =       no + 1
+        .endr
+exception_trampoline1:
+        mov.l   r0,@-sp
+        extu.b  r1,r1
+        movi20  #0x100,r0
+        add     r0,r1
+        mov.l   1f,r0
+        jmp     @r0
+          extu.w        r1,r1
+        
+        .align  2
+1:      .long   exception_handler
+
+        !
+! Exception Vector Base
+!
+        .align  2
+ENTRY(vbr_base)
+vector  =       0
+        .rept   256
+        .long   exception_entry0 + vector * 6
+vector  =       vector + 1
+        .endr
+        .rept   256
+        .long   exception_entry1 + vector * 6
+vector  =       vector + 1
+        .endr
diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S
index 4004073f98cd..3fe482dd05c1 100644
--- a/arch/sh/kernel/cpu/sh3/entry.S
+++ b/arch/sh/kernel/cpu/sh3/entry.S
@@ -14,7 +14,7 @@
 #include <asm/asm-offsets.h>
 #include <asm/thread_info.h>
 #include <asm/unistd.h>
-#include <asm/cpu/mmu_context.h>
+#include <cpu/mmu_context.h>
 #include <asm/page.h>
 
 ! NOTE:
diff --git a/arch/sh/kernel/cpu/sh3/ex.S b/arch/sh/kernel/cpu/sh3/ex.S
index 11b6d9c6edae..dac429726899 100644
--- a/arch/sh/kernel/cpu/sh3/ex.S
+++ b/arch/sh/kernel/cpu/sh3/ex.S
@@ -4,7 +4,7 @@
  *  The SH-3 and SH-4 exception vector table.
 
  *  Copyright (C) 1999, 2000, 2002  Niibe Yutaka
- *  Copyright (C) 2003 - 2006  Paul Mundt
+ *  Copyright (C) 2003 - 2008  Paul Mundt
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -12,13 +12,30 @@
  */
 #include <linux/linkage.h>
 
+#if !defined(CONFIG_MMU)
+#define tlb_miss_load                   exception_error
+#define tlb_miss_store                  exception_error
+#define initial_page_write              exception_error
+#define tlb_protection_violation_load   exception_error
+#define tlb_protection_violation_store  exception_error
+#define address_error_load              exception_error
+#define address_error_store             exception_error
+#endif
+
+#if !defined(CONFIG_SH_FPU)
+#define fpu_error_trap_handler          exception_error
+#endif
+
+#if !defined(CONFIG_KGDB_NMI)
+#define kgdb_handle_exception           exception_error
+#endif
+
         .align 2
         .data
 
 ENTRY(exception_handling_table)
         .long   exception_error         /* 000 */
         .long   exception_error
-#if defined(CONFIG_MMU)
         .long   tlb_miss_load           /* 040 */
         .long   tlb_miss_store
         .long   initial_page_write
@@ -26,30 +43,13 @@ ENTRY(exception_handling_table)
         .long   tlb_protection_violation_store
         .long   address_error_load
         .long   address_error_store     /* 100 */
-#else
-        .long   exception_error ! tlb miss load         /* 040 */
-        .long   exception_error ! tlb miss store
-        .long   exception_error ! initial page write
-        .long   exception_error ! tlb prot violation load
-        .long   exception_error ! tlb prot violation store
-        .long   exception_error ! address error load
-        .long   exception_error ! address error store   /* 100 */
-#endif
-#if defined(CONFIG_SH_FPU)
         .long   fpu_error_trap_handler  /* 120 */
-#else
-        .long   exception_error         /* 120 */
-#endif
         .long   exception_error         /* 140 */
         .long   system_call     ! Unconditional Trap     /* 160 */
         .long   exception_error ! reserved_instruction (filled by trap_init) /* 180 */
         .long   exception_error ! illegal_slot_instruction (filled by trap_init) /*1A0*/
 ENTRY(nmi_slot)
-#if defined (CONFIG_KGDB_NMI)
         .long   kgdb_handle_exception   /* 1C0 */       ! Allow trap to debugger
-#else
-        .long   exception_none  /* 1C0 */       ! Not implemented yet
-#endif
 ENTRY(user_break_point_trap)
         .long   break_point_trap        /* 1E0 */
 
diff --git a/arch/sh/kernel/cpu/sh4/fpu.c b/arch/sh/kernel/cpu/sh4/fpu.c
index 8020796139f1..2d452f67fb87 100644
--- a/arch/sh/kernel/cpu/sh4/fpu.c
+++ b/arch/sh/kernel/cpu/sh4/fpu.c
@@ -13,7 +13,7 @@
 #include <linux/sched.h>
 #include <linux/signal.h>
 #include <linux/io.h>
-#include <asm/cpu/fpu.h>
+#include <cpu/fpu.h>
 #include <asm/processor.h>
 #include <asm/system.h>
 #include <asm/fpu.h>
diff --git a/arch/sh/kernel/cpu/sh4/probe.c b/arch/sh/kernel/cpu/sh4/probe.c
index be4926969181..2e42572b1b11 100644
--- a/arch/sh/kernel/cpu/sh4/probe.c
+++ b/arch/sh/kernel/cpu/sh4/probe.c
@@ -50,14 +50,18 @@ int __init detect_cpu_and_cache_system(void)
         boot_cpu_data.dcache.ways               = 1;
         boot_cpu_data.dcache.linesz             = L1_CACHE_BYTES;
 
+        /* We don't know the chip cut */
+        boot_cpu_data.cut_major = boot_cpu_data.cut_minor = -1;
+
         /*
          * Setup some generic flags we can probe on SH-4A parts
          */
-        if (((pvr >> 24) & 0xff) == 0x10) {
+        if (((pvr >> 16) & 0xff) == 0x10) {
                 if ((cvr & 0x10000000) == 0)
                         boot_cpu_data.flags |= CPU_HAS_DSP;
 
                 boot_cpu_data.flags |= CPU_HAS_LLSC;
+                boot_cpu_data.cut_major = pvr & 0x7f;
         }
 
         /* FPU detection works for everyone */
diff --git a/arch/sh/kernel/cpu/sh4/softfloat.c b/arch/sh/kernel/cpu/sh4/softfloat.c
index 7b2d337ee412..828cb57cb959 100644
--- a/arch/sh/kernel/cpu/sh4/softfloat.c
+++ b/arch/sh/kernel/cpu/sh4/softfloat.c
@@ -36,7 +36,7 @@
  * and Kamel Khelifi <kamel.khelifi@st.com>
  */
 #include <linux/kernel.h>
-#include <asm/cpu/fpu.h>
+#include <cpu/fpu.h>
 
 #define LIT64( a ) a##LL
 
diff --git a/arch/sh/kernel/cpu/sh4/sq.c b/arch/sh/kernel/cpu/sh4/sq.c
index 9561b02ade0e..dcdf959a3d44 100644
--- a/arch/sh/kernel/cpu/sh4/sq.c
+++ b/arch/sh/kernel/cpu/sh4/sq.c
@@ -22,7 +22,7 @@
 #include <linux/io.h>
 #include <asm/page.h>
 #include <asm/cacheflush.h>
-#include <asm/cpu/sq.h>
+#include <cpu/sq.h>
 
 struct sq_mapping;
 
diff --git a/arch/sh/kernel/cpu/sh4a/Makefile b/arch/sh/kernel/cpu/sh4a/Makefile
index a880e7968750..9381ad8da263 100644
--- a/arch/sh/kernel/cpu/sh4a/Makefile
+++ b/arch/sh/kernel/cpu/sh4a/Makefile
@@ -21,7 +21,7 @@ clock-$(CONFIG_CPU_SUBTYPE_SH7763)	:= clock-sh7763.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7770)      := clock-sh7770.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7780)      := clock-sh7780.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7785)      := clock-sh7785.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7343)      := clock-sh7343.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7343)      := clock-sh7722.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7722)      := clock-sh7722.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7723)      := clock-sh7722.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7366)      := clock-sh7722.o
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7343.c b/arch/sh/kernel/cpu/sh4a/clock-sh7343.c
deleted file mode 100644
index 7adc4f16e95a..000000000000
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7343.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * arch/sh/kernel/cpu/sh4a/clock-sh7343.c
- *
- * SH7343/SH7722 support for the clock framework
- *
- *  Copyright (C) 2006  Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-
-/*
- * SH7343/SH7722 uses a common set of multipliers and divisors, so this
- * is quite simple..
- */
-static int multipliers[] = { 1, 2, 1, 2, 1, 1, 1, 1, 1, 1, 1, 1, 1 };
-static int divisors[] = { 1, 3, 2, 5, 3, 4, 5, 6, 8, 10, 12, 16, 20 };
-
-#define pll_calc() (((ctrl_inl(FRQCR) >> 24) & 0x1f) + 1)
-
-static void master_clk_init(struct clk *clk)
-{
-        clk->parent = clk_get(NULL, "cpu_clk");
-}
-
-static void master_clk_recalc(struct clk *clk)
-{
-        int idx = (ctrl_inl(FRQCR) & 0x000f);
-        clk->rate *= clk->parent->rate * multipliers[idx] / divisors[idx];
-}
-
-static struct clk_ops sh7343_master_clk_ops = {
-        .init           = master_clk_init,
-        .recalc         = master_clk_recalc,
-};
-
-static void module_clk_init(struct clk *clk)
-{
-        clk->parent = NULL;
-        clk->rate = CONFIG_SH_PCLK_FREQ;
-}
-
-static struct clk_ops sh7343_module_clk_ops = {
-        .init           = module_clk_init,
-};
-
-static void bus_clk_init(struct clk *clk)
-{
-        clk->parent = clk_get(NULL, "cpu_clk");
-}
-
-static void bus_clk_recalc(struct clk *clk)
-{
-        int idx = (ctrl_inl(FRQCR) >> 8) & 0x000f;
-        clk->rate = clk->parent->rate * multipliers[idx] / divisors[idx];
-}
-
-static struct clk_ops sh7343_bus_clk_ops = {
-        .init           = bus_clk_init,
-        .recalc         = bus_clk_recalc,
-};
-
-static void cpu_clk_init(struct clk *clk)
-{
-        clk->parent = clk_get(NULL, "module_clk");
-        clk->flags |= CLK_RATE_PROPAGATES;
-        clk_set_rate(clk, clk_get_rate(clk));
-}
-
-static void cpu_clk_recalc(struct clk *clk)
-{
-        int idx = (ctrl_inl(FRQCR) >> 20) & 0x000f;
-        clk->rate = clk->parent->rate * pll_calc() *
-                multipliers[idx] / divisors[idx];
-}
-
-static struct clk_ops sh7343_cpu_clk_ops = {
-        .init           = cpu_clk_init,
-        .recalc         = cpu_clk_recalc,
-};
-
-static struct clk_ops *sh7343_clk_ops[] = {
-        &sh7343_master_clk_ops,
-        &sh7343_module_clk_ops,
-        &sh7343_bus_clk_ops,
-        &sh7343_cpu_clk_ops,
-};
-
-void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
-{
-        if (idx < ARRAY_SIZE(sh7343_clk_ops))
-                *ops = sh7343_clk_ops[idx];
-}
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
index 299138ebe160..db913855c2fd 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
@@ -1,7 +1,7 @@
 /*
  * arch/sh/kernel/cpu/sh4a/clock-sh7722.c
  *
- * SH7722 & SH7366 support for the clock framework
+ * SH7343, SH7722, SH7723 & SH7366 support for the clock framework
  *
  * Copyright (c) 2006-2007 Nomad Global Solutions Inc
  * Based on code for sh7343 by Paul Mundt
@@ -14,6 +14,7 @@
 #include <linux/kernel.h>
 #include <linux/io.h>
 #include <linux/errno.h>
+#include <linux/stringify.h>
 #include <asm/clock.h>
 #include <asm/freq.h>
 
@@ -411,40 +412,40 @@ static struct clk_ops sh7722_frqcr_clk_ops = {
  * clock ops methods for SIU A/B and IrDA clock
  *
  */
-static int sh7722_siu_which(struct clk *clk)
+
+#ifndef CONFIG_CPU_SUBTYPE_SH7343
+
+static int sh7722_siu_set_rate(struct clk *clk, unsigned long rate, int algo_id)
 {
-        if (!strcmp(clk->name, "siu_a_clk"))
-                return 0;
-        if (!strcmp(clk->name, "siu_b_clk"))
-                return 1;
-#if defined(CONFIG_CPU_SUBTYPE_SH7722)
-        if (!strcmp(clk->name, "irda_clk"))
-                return 2;
-#endif
-        return -EINVAL;
+        unsigned long r;
+        int div;
+
+        r = ctrl_inl(clk->arch_flags);
+        div = sh7722_find_divisors(clk->parent->rate, rate);
+        if (div < 0)
+                return div;
+        r = (r & ~0xF) | div;
+        ctrl_outl(r, clk->arch_flags);
+        return 0;
 }
 
-static unsigned long sh7722_siu_regs[] = {
-        [0] = SCLKACR,
-        [1] = SCLKBCR,
-#if defined(CONFIG_CPU_SUBTYPE_SH7722)
-        [2] = IrDACLKCR,
-#endif
-};
+static void sh7722_siu_recalc(struct clk *clk)
+{
+        unsigned long r;
+
+        r = ctrl_inl(clk->arch_flags);
+        clk->rate = clk->parent->rate * 2 / divisors2[r & 0xF];
+}
 
 static int sh7722_siu_start_stop(struct clk *clk, int enable)
 {
-        int siu = sh7722_siu_which(clk);
         unsigned long r;
 
-        if (siu < 0)
-                return siu;
-        BUG_ON(siu > 2);
-        r = ctrl_inl(sh7722_siu_regs[siu]);
+        r = ctrl_inl(clk->arch_flags);
         if (enable)
-                ctrl_outl(r & ~(1 << 8), sh7722_siu_regs[siu]);
+                ctrl_outl(r & ~(1 << 8), clk->arch_flags);
         else
-                ctrl_outl(r | (1 << 8), sh7722_siu_regs[siu]);
+                ctrl_outl(r | (1 << 8), clk->arch_flags);
         return 0;
 }
 
@@ -458,6 +459,15 @@ static void sh7722_siu_disable(struct clk *clk)
         sh7722_siu_start_stop(clk, 0);
 }
 
+static struct clk_ops sh7722_siu_clk_ops = {
+        .recalc = sh7722_siu_recalc,
+        .set_rate = sh7722_siu_set_rate,
+        .enable = sh7722_siu_enable,
+        .disable = sh7722_siu_disable,
+};
+
+#endif /* CONFIG_CPU_SUBTYPE_SH7343 */
+
 static void sh7722_video_enable(struct clk *clk)
 {
         unsigned long r;
@@ -494,43 +504,6 @@ static void sh7722_video_recalc(struct clk *clk)
         clk->rate = clk->parent->rate / ((r & 0x3F) + 1);
 }
 
-static int sh7722_siu_set_rate(struct clk *clk, unsigned long rate, int algo_id)
-{
-        int siu = sh7722_siu_which(clk);
-        unsigned long r;
-        int div;
-
-        if (siu < 0)
-                return siu;
-        BUG_ON(siu > 2);
-        r = ctrl_inl(sh7722_siu_regs[siu]);
-        div = sh7722_find_divisors(clk->parent->rate, rate);
-        if (div < 0)
-                return div;
-        r = (r & ~0xF) | div;
-        ctrl_outl(r, sh7722_siu_regs[siu]);
-        return 0;
-}
-
-static void sh7722_siu_recalc(struct clk *clk)
-{
-        int siu = sh7722_siu_which(clk);
-        unsigned long r;
-
-        if (siu < 0)
-                return /* siu */ ;
-        BUG_ON(siu > 2);
-        r = ctrl_inl(sh7722_siu_regs[siu]);
-        clk->rate = clk->parent->rate * 2 / divisors2[r & 0xF];
-}
-
-static struct clk_ops sh7722_siu_clk_ops = {
-        .recalc = sh7722_siu_recalc,
-        .set_rate = sh7722_siu_set_rate,
-        .enable = sh7722_siu_enable,
-        .disable = sh7722_siu_disable,
-};
-
 static struct clk_ops sh7722_video_clk_ops = {
         .recalc = sh7722_video_recalc,
         .set_rate = sh7722_video_set_rate,
@@ -560,6 +533,9 @@ static struct clk sh7722_sdram_clock = {
         .ops = &sh7722_frqcr_clk_ops,
 };
 
+
+#ifndef CONFIG_CPU_SUBTYPE_SH7343
+
 /*
  * these three clocks - SIU A, SIU B, IrDA - share the same clk_ops
  * methods of clk_ops determine which register they should access by
@@ -567,36 +543,151 @@ static struct clk sh7722_sdram_clock = {
  */
 static struct clk sh7722_siu_a_clock = {
         .name = "siu_a_clk",
+        .arch_flags = SCLKACR,
         .ops = &sh7722_siu_clk_ops,
 };
 
 static struct clk sh7722_siu_b_clock = {
         .name = "siu_b_clk",
+        .arch_flags = SCLKBCR,
         .ops = &sh7722_siu_clk_ops,
 };
 
 #if defined(CONFIG_CPU_SUBTYPE_SH7722)
 static struct clk sh7722_irda_clock = {
         .name = "irda_clk",
+        .arch_flags = IrDACLKCR,
         .ops = &sh7722_siu_clk_ops,
 };
 #endif
+#endif /* CONFIG_CPU_SUBTYPE_SH7343 */
 
 static struct clk sh7722_video_clock = {
         .name = "video_clk",
         .ops = &sh7722_video_clk_ops,
 };
 
+static int sh7722_mstpcr_start_stop(struct clk *clk, unsigned long reg,
+                                    int enable)
+{
+        unsigned long bit = clk->arch_flags;
+        unsigned long r;
+
+        r = ctrl_inl(reg);
+
+        if (enable)
+                r &= ~(1 << bit);
+        else
+                r |= (1 << bit);
+
+        ctrl_outl(r, reg);
+        return 0;
+}
+
+static void sh7722_mstpcr0_enable(struct clk *clk)
+{
+        sh7722_mstpcr_start_stop(clk, MSTPCR0, 1);
+}
+
+static void sh7722_mstpcr0_disable(struct clk *clk)
+{
+        sh7722_mstpcr_start_stop(clk, MSTPCR0, 0);
+}
+
+static void sh7722_mstpcr1_enable(struct clk *clk)
+{
+        sh7722_mstpcr_start_stop(clk, MSTPCR1, 1);
+}
+
+static void sh7722_mstpcr1_disable(struct clk *clk)
+{
+        sh7722_mstpcr_start_stop(clk, MSTPCR1, 0);
+}
+
+static void sh7722_mstpcr2_enable(struct clk *clk)
+{
+        sh7722_mstpcr_start_stop(clk, MSTPCR2, 1);
+}
+
+static void sh7722_mstpcr2_disable(struct clk *clk)
+{
+        sh7722_mstpcr_start_stop(clk, MSTPCR2, 0);
+}
+
+static struct clk_ops sh7722_mstpcr0_clk_ops = {
+        .enable = sh7722_mstpcr0_enable,
+        .disable = sh7722_mstpcr0_disable,
+};
+
+static struct clk_ops sh7722_mstpcr1_clk_ops = {
+        .enable = sh7722_mstpcr1_enable,
+        .disable = sh7722_mstpcr1_disable,
+};
+
+static struct clk_ops sh7722_mstpcr2_clk_ops = {
+        .enable = sh7722_mstpcr2_enable,
+        .disable = sh7722_mstpcr2_disable,
+};
+
+#define DECLARE_MSTPCRN(regnr, bitnr, bitstr)           \
+{                                                       \
+        .name = "mstp" __stringify(regnr) bitstr,       \
+        .arch_flags = bitnr,                            \
+        .ops = &sh7722_mstpcr ## regnr ## _clk_ops,     \
+}
+
+#define DECLARE_MSTPCR(regnr) \
+        DECLARE_MSTPCRN(regnr, 31, "31"), \
+        DECLARE_MSTPCRN(regnr, 30, "30"), \
+        DECLARE_MSTPCRN(regnr, 29, "29"), \
+        DECLARE_MSTPCRN(regnr, 28, "28"), \
+        DECLARE_MSTPCRN(regnr, 27, "27"), \
+        DECLARE_MSTPCRN(regnr, 26, "26"), \
+        DECLARE_MSTPCRN(regnr, 25, "25"), \
+        DECLARE_MSTPCRN(regnr, 24, "24"), \
+        DECLARE_MSTPCRN(regnr, 23, "23"), \
+        DECLARE_MSTPCRN(regnr, 22, "22"), \
+        DECLARE_MSTPCRN(regnr, 21, "21"), \
+        DECLARE_MSTPCRN(regnr, 20, "20"), \
+        DECLARE_MSTPCRN(regnr, 19, "19"), \
+        DECLARE_MSTPCRN(regnr, 18, "18"), \
+        DECLARE_MSTPCRN(regnr, 17, "17"), \
+        DECLARE_MSTPCRN(regnr, 16, "16"), \
+        DECLARE_MSTPCRN(regnr, 15, "15"), \
+        DECLARE_MSTPCRN(regnr, 14, "14"), \
+        DECLARE_MSTPCRN(regnr, 13, "13"), \
+        DECLARE_MSTPCRN(regnr, 12, "12"), \
+        DECLARE_MSTPCRN(regnr, 11, "11"), \
+        DECLARE_MSTPCRN(regnr, 10, "10"), \
+        DECLARE_MSTPCRN(regnr, 9, "09"), \
+        DECLARE_MSTPCRN(regnr, 8, "08"), \
+        DECLARE_MSTPCRN(regnr, 7, "07"), \
+        DECLARE_MSTPCRN(regnr, 6, "06"), \
+        DECLARE_MSTPCRN(regnr, 5, "05"), \
+        DECLARE_MSTPCRN(regnr, 4, "04"), \
+        DECLARE_MSTPCRN(regnr, 3, "03"), \
+        DECLARE_MSTPCRN(regnr, 2, "02"), \
+        DECLARE_MSTPCRN(regnr, 1, "01"), \
+        DECLARE_MSTPCRN(regnr, 0, "00")
+
+static struct clk sh7722_mstpcr[] = {
+        DECLARE_MSTPCR(0),
+        DECLARE_MSTPCR(1),
+        DECLARE_MSTPCR(2),
+};
+
 static struct clk *sh7722_clocks[] = {
         &sh7722_umem_clock,
         &sh7722_sh_clock,
         &sh7722_peripheral_clock,
         &sh7722_sdram_clock,
+#ifndef CONFIG_CPU_SUBTYPE_SH7343
         &sh7722_siu_a_clock,
         &sh7722_siu_b_clock,
 #if defined(CONFIG_CPU_SUBTYPE_SH7722)
         &sh7722_irda_clock,
 #endif
+#endif
         &sh7722_video_clock,
 };
 
@@ -629,5 +720,11 @@ int __init arch_clk_init(void)
                 clk_register(sh7722_clocks[i]);
         }
         clk_put(master);
+
+        for (i = 0; i < ARRAY_SIZE(sh7722_mstpcr); i++) {
+                pr_debug( "Registering mstpcr '%s'\n", sh7722_mstpcr[i].name);
+                clk_register(&sh7722_mstpcr[i]);
+        }
+
         return 0;
 }
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
index 6d4f50cd4aaf..78881b4214da 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
@@ -11,6 +11,104 @@
 #include <linux/init.h>
 #include <linux/serial.h>
 #include <linux/serial_sci.h>
+#include <linux/uio_driver.h>
+#include <asm/clock.h>
+
+static struct resource iic0_resources[] = {
+        [0] = {
+                .name   = "IIC0",
+                .start  = 0x04470000,
+                .end    = 0x04470017,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = 96,
+                .end    = 99,
+                .flags  = IORESOURCE_IRQ,
+       },
+};
+
+static struct platform_device iic0_device = {
+        .name           = "i2c-sh_mobile",
+        .num_resources  = ARRAY_SIZE(iic0_resources),
+        .resource       = iic0_resources,
+};
+
+static struct resource iic1_resources[] = {
+        [0] = {
+                .name   = "IIC1",
+                .start  = 0x04750000,
+                .end    = 0x04750017,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = 44,
+                .end    = 47,
+                .flags  = IORESOURCE_IRQ,
+       },
+};
+
+static struct platform_device iic1_device = {
+        .name           = "i2c-sh_mobile",
+        .num_resources  = ARRAY_SIZE(iic1_resources),
+        .resource       = iic1_resources,
+};
+
+static struct uio_info vpu_platform_data = {
+        .name = "VPU4",
+        .version = "0",
+        .irq = 60,
+};
+
+static struct resource vpu_resources[] = {
+        [0] = {
+                .name   = "VPU",
+                .start  = 0xfe900000,
+                .end    = 0xfe9022eb,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                /* place holder for contiguous memory */
+        },
+};
+
+static struct platform_device vpu_device = {
+        .name           = "uio_pdrv_genirq",
+        .id             = 0,
+        .dev = {
+                .platform_data  = &vpu_platform_data,
+        },
+        .resource       = vpu_resources,
+        .num_resources  = ARRAY_SIZE(vpu_resources),
+};
+
+static struct uio_info veu_platform_data = {
+        .name = "VEU",
+        .version = "0",
+        .irq = 54,
+};
+
+static struct resource veu_resources[] = {
+        [0] = {
+                .name   = "VEU",
+                .start  = 0xfe920000,
+                .end    = 0xfe9200b7,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                /* place holder for contiguous memory */
+        },
+};
+
+static struct platform_device veu_device = {
+        .name           = "uio_pdrv_genirq",
+        .id             = 1,
+        .dev = {
+                .platform_data  = &veu_platform_data,
+        },
+        .resource       = veu_resources,
+        .num_resources  = ARRAY_SIZE(veu_resources),
+};
 
 static struct plat_sci_port sci_platform_data[] = {
         {
@@ -32,16 +130,171 @@ static struct platform_device sci_device = {
 };
 
 static struct platform_device *sh7343_devices[] __initdata = {
+        &iic0_device,
+        &iic1_device,
         &sci_device,
+        &vpu_device,
+        &veu_device,
 };
 
 static int __init sh7343_devices_setup(void)
 {
+        clk_always_enable("mstp031"); /* TLB */
+        clk_always_enable("mstp030"); /* IC */
+        clk_always_enable("mstp029"); /* OC */
+        clk_always_enable("mstp028"); /* URAM */
+        clk_always_enable("mstp026"); /* XYMEM */
+        clk_always_enable("mstp023"); /* INTC3 */
+        clk_always_enable("mstp022"); /* INTC */
+        clk_always_enable("mstp020"); /* SuperHyway */
+        clk_always_enable("mstp109"); /* I2C0 */
+        clk_always_enable("mstp108"); /* I2C1 */
+        clk_always_enable("mstp202"); /* VEU */
+        clk_always_enable("mstp201"); /* VPU */
+
+        platform_resource_setup_memory(&vpu_device, "vpu", 1 << 20);
+        platform_resource_setup_memory(&veu_device, "veu", 2 << 20);
+
         return platform_add_devices(sh7343_devices,
                                     ARRAY_SIZE(sh7343_devices));
 }
 __initcall(sh7343_devices_setup);
 
+enum {
+        UNUSED = 0,
+
+        /* interrupt sources */
+        IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
+        DMAC0, DMAC1, DMAC2, DMAC3,
+        VIO_CEUI, VIO_BEUI, VIO_VEUI, VOU,
+        MFI, VPU, TPU, Z3D4, USBI0, USBI1,
+        MMC_ERR, MMC_TRAN, MMC_FSTAT, MMC_FRDY,
+        DMAC4, DMAC5, DMAC_DADERR,
+        KEYSC,
+        SCIF, SCIF1, SCIF2, SCIF3, SCIF4,
+        SIOF0, SIOF1, SIO,
+        FLCTL_FLSTEI, FLCTL_FLENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I,
+        I2C0_ALI, I2C0_TACKI, I2C0_WAITI, I2C0_DTEI,
+        I2C1_ALI, I2C1_TACKI, I2C1_WAITI, I2C1_DTEI,
+        SIM_TEI, SIM_TXI, SIM_RXI, SIM_ERI,
+        IRDA,
+        SDHI0, SDHI1, SDHI2, SDHI3,
+        CMT, TSIF, SIU,
+        TMU0, TMU1, TMU2,
+        JPU, LCDC,
+
+        /* interrupt groups */
+
+        DMAC0123, VIOVOU, MMC, DMAC45, FLCTL, I2C0, I2C1, SIM, SDHI, USB,
+};
+
+static struct intc_vect vectors[] __initdata = {
+        INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620),
+        INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660),
+        INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0),
+        INTC_VECT(IRQ6, 0x6c0), INTC_VECT(IRQ7, 0x6e0),
+        INTC_VECT(I2C1_ALI, 0x780), INTC_VECT(I2C1_TACKI, 0x7a0),
+        INTC_VECT(I2C1_WAITI, 0x7c0), INTC_VECT(I2C1_DTEI, 0x7e0),
+        INTC_VECT(DMAC0, 0x800), INTC_VECT(DMAC1, 0x820),
+        INTC_VECT(DMAC2, 0x840), INTC_VECT(DMAC3, 0x860),
+        INTC_VECT(VIO_CEUI, 0x880), INTC_VECT(VIO_BEUI, 0x8a0),
+        INTC_VECT(VIO_VEUI, 0x8c0), INTC_VECT(VOU, 0x8e0),
+        INTC_VECT(MFI, 0x900), INTC_VECT(VPU, 0x980),
+        INTC_VECT(TPU, 0x9a0), INTC_VECT(Z3D4, 0x9e0),
+        INTC_VECT(USBI0, 0xa20), INTC_VECT(USBI1, 0xa40),
+        INTC_VECT(MMC_ERR, 0xb00), INTC_VECT(MMC_TRAN, 0xb20),
+        INTC_VECT(MMC_FSTAT, 0xb40), INTC_VECT(MMC_FRDY, 0xb60),
+        INTC_VECT(DMAC4, 0xb80), INTC_VECT(DMAC5, 0xba0),
+        INTC_VECT(DMAC_DADERR, 0xbc0), INTC_VECT(KEYSC, 0xbe0),
+        INTC_VECT(SCIF, 0xc00), INTC_VECT(SCIF1, 0xc20),
+        INTC_VECT(SCIF2, 0xc40), INTC_VECT(SCIF3, 0xc60),
+        INTC_VECT(SIOF0, 0xc80), INTC_VECT(SIOF1, 0xca0),
+        INTC_VECT(SIO, 0xd00),
+        INTC_VECT(FLCTL_FLSTEI, 0xd80), INTC_VECT(FLCTL_FLENDI, 0xda0),
+        INTC_VECT(FLCTL_FLTREQ0I, 0xdc0), INTC_VECT(FLCTL_FLTREQ1I, 0xde0),
+        INTC_VECT(I2C0_ALI, 0xe00), INTC_VECT(I2C0_TACKI, 0xe20),
+        INTC_VECT(I2C0_WAITI, 0xe40), INTC_VECT(I2C0_DTEI, 0xe60),
+        INTC_VECT(SDHI0, 0xe80), INTC_VECT(SDHI1, 0xea0),
+        INTC_VECT(SDHI2, 0xec0), INTC_VECT(SDHI3, 0xee0),
+        INTC_VECT(CMT, 0xf00), INTC_VECT(TSIF, 0xf20),
+        INTC_VECT(SIU, 0xf80),
+        INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
+        INTC_VECT(TMU2, 0x440),
+        INTC_VECT(JPU, 0x560), INTC_VECT(LCDC, 0x580),
+};
+
+static struct intc_group groups[] __initdata = {
+        INTC_GROUP(DMAC0123, DMAC0, DMAC1, DMAC2, DMAC3),
+        INTC_GROUP(VIOVOU, VIO_CEUI, VIO_BEUI, VIO_VEUI, VOU),
+        INTC_GROUP(MMC, MMC_FRDY, MMC_FSTAT, MMC_TRAN, MMC_ERR),
+        INTC_GROUP(DMAC45, DMAC4, DMAC5, DMAC_DADERR),
+        INTC_GROUP(FLCTL, FLCTL_FLSTEI, FLCTL_FLENDI,
+                   FLCTL_FLTREQ0I, FLCTL_FLTREQ1I),
+        INTC_GROUP(I2C0, I2C0_ALI, I2C0_TACKI, I2C0_WAITI, I2C0_DTEI),
+        INTC_GROUP(I2C1, I2C1_ALI, I2C1_TACKI, I2C1_WAITI, I2C1_DTEI),
+        INTC_GROUP(SIM, SIM_TEI, SIM_TXI, SIM_RXI, SIM_ERI),
+        INTC_GROUP(SDHI, SDHI0, SDHI1, SDHI2, SDHI3),
+        INTC_GROUP(USB, USBI0, USBI1),
+};
+
+static struct intc_mask_reg mask_registers[] __initdata = {
+        { 0xa4080084, 0xa40800c4, 8, /* IMR1 / IMCR1 */
+          { VOU, VIO_VEUI, VIO_BEUI, VIO_CEUI, DMAC3, DMAC2, DMAC1, DMAC0 } },
+        { 0xa4080088, 0xa40800c8, 8, /* IMR2 / IMCR2 */
+          { 0, 0, 0, VPU, 0, 0, 0, MFI } },
+        { 0xa408008c, 0xa40800cc, 8, /* IMR3 / IMCR3 */
+          { SIM_TEI, SIM_TXI, SIM_RXI, SIM_ERI, 0, 0, 0, IRDA } },
+        { 0xa4080090, 0xa40800d0, 8, /* IMR4 / IMCR4 */
+          { 0, TMU2, TMU1, TMU0, JPU, 0, 0, LCDC } },
+        { 0xa4080094, 0xa40800d4, 8, /* IMR5 / IMCR5 */
+          { KEYSC, DMAC_DADERR, DMAC5, DMAC4, SCIF3, SCIF2, SCIF1, SCIF } },
+        { 0xa4080098, 0xa40800d8, 8, /* IMR6 / IMCR6 */
+          { 0, 0, 0, SIO, Z3D4, 0, SIOF1, SIOF0 } },
+        { 0xa408009c, 0xa40800dc, 8, /* IMR7 / IMCR7 */
+          { I2C0_DTEI, I2C0_WAITI, I2C0_TACKI, I2C0_ALI,
+            FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLENDI, FLCTL_FLSTEI } },
+        { 0xa40800a0, 0xa40800e0, 8, /* IMR8 / IMCR8 */
+          { SDHI3, SDHI2, SDHI1, SDHI0, 0, 0, 0, SIU } },
+        { 0xa40800a4, 0xa40800e4, 8, /* IMR9 / IMCR9 */
+          { 0, 0, 0, CMT, 0, USBI1, USBI0 } },
+        { 0xa40800a8, 0xa40800e8, 8, /* IMR10 / IMCR10 */
+          { MMC_FRDY, MMC_FSTAT, MMC_TRAN, MMC_ERR } },
+        { 0xa40800ac, 0xa40800ec, 8, /* IMR11 / IMCR11 */
+          { I2C1_DTEI, I2C1_WAITI, I2C1_TACKI, I2C1_ALI, TPU, 0, 0, TSIF } },
+        { 0xa4140044, 0xa4140064, 8, /* INTMSK00 / INTMSKCLR00 */
+          { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+        { 0xa4080000, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2 } },
+        { 0xa4080004, 0, 16, 4, /* IPRB */ { JPU, LCDC, SIM } },
+        { 0xa4080010, 0, 16, 4, /* IPRE */ { DMAC0123, VIOVOU, MFI, VPU } },
+        { 0xa4080014, 0, 16, 4, /* IPRF */ { KEYSC, DMAC45, USB, CMT } },
+        { 0xa4080018, 0, 16, 4, /* IPRG */ { SCIF, SCIF1, SCIF2, SCIF3 } },
+        { 0xa408001c, 0, 16, 4, /* IPRH */ { SIOF0, SIOF1, FLCTL, I2C0 } },
+        { 0xa4080020, 0, 16, 4, /* IPRI */ { SIO, 0, TSIF, I2C1 } },
+        { 0xa4080024, 0, 16, 4, /* IPRJ */ { Z3D4, 0, SIU } },
+        { 0xa4080028, 0, 16, 4, /* IPRK */ { 0, MMC, 0, SDHI } },
+        { 0xa408002c, 0, 16, 4, /* IPRL */ { 0, 0, TPU } },
+        { 0xa4140010, 0, 32, 4, /* INTPRI00 */
+          { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static struct intc_sense_reg sense_registers[] __initdata = {
+        { 0xa414001c, 16, 2, /* ICR1 */
+          { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static struct intc_mask_reg ack_registers[] __initdata = {
+        { 0xa4140024, 0, 8, /* INTREQ00 */
+          { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static DECLARE_INTC_DESC_ACK(intc_desc, "sh7343", vectors, groups,
+                             mask_registers, prio_registers, sense_registers,
+                             ack_registers);
+
 void __init plat_irq_setup(void)
 {
+        register_intc_controller(&intc_desc);
 }
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
index f26b5cdad0d1..6851dba02f31 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
@@ -13,6 +13,112 @@
 #include <linux/init.h>
 #include <linux/serial.h>
 #include <linux/serial_sci.h>
+#include <linux/uio_driver.h>
+#include <asm/clock.h>
+
+static struct resource iic_resources[] = {
+        [0] = {
+                .name   = "IIC",
+                .start  = 0x04470000,
+                .end    = 0x04470017,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = 96,
+                .end    = 99,
+                .flags  = IORESOURCE_IRQ,
+       },
+};
+
+static struct platform_device iic_device = {
+        .name           = "i2c-sh_mobile",
+        .num_resources  = ARRAY_SIZE(iic_resources),
+        .resource       = iic_resources,
+};
+
+static struct uio_info vpu_platform_data = {
+        .name = "VPU5",
+        .version = "0",
+        .irq = 60,
+};
+
+static struct resource vpu_resources[] = {
+        [0] = {
+                .name   = "VPU",
+                .start  = 0xfe900000,
+                .end    = 0xfe902807,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                /* place holder for contiguous memory */
+        },
+};
+
+static struct platform_device vpu_device = {
+        .name           = "uio_pdrv_genirq",
+        .id             = 0,
+        .dev = {
+                .platform_data  = &vpu_platform_data,
+        },
+        .resource       = vpu_resources,
+        .num_resources  = ARRAY_SIZE(vpu_resources),
+};
+
+static struct uio_info veu0_platform_data = {
+        .name = "VEU",
+        .version = "0",
+        .irq = 54,
+};
+
+static struct resource veu0_resources[] = {
+        [0] = {
+                .name   = "VEU(1)",
+                .start  = 0xfe920000,
+                .end    = 0xfe9200b7,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                /* place holder for contiguous memory */
+        },
+};
+
+static struct platform_device veu0_device = {
+        .name           = "uio_pdrv_genirq",
+        .id             = 1,
+        .dev = {
+                .platform_data  = &veu0_platform_data,
+        },
+        .resource       = veu0_resources,
+        .num_resources  = ARRAY_SIZE(veu0_resources),
+};
+
+static struct uio_info veu1_platform_data = {
+        .name = "VEU",
+        .version = "0",
+        .irq = 27,
+};
+
+static struct resource veu1_resources[] = {
+        [0] = {
+                .name   = "VEU(2)",
+                .start  = 0xfe924000,
+                .end    = 0xfe9240b7,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                /* place holder for contiguous memory */
+        },
+};
+
+static struct platform_device veu1_device = {
+        .name           = "uio_pdrv_genirq",
+        .id             = 2,
+        .dev = {
+                .platform_data  = &veu1_platform_data,
+        },
+        .resource       = veu1_resources,
+        .num_resources  = ARRAY_SIZE(veu1_resources),
+};
 
 static struct plat_sci_port sci_platform_data[] = {
         {
@@ -34,11 +140,32 @@ static struct platform_device sci_device = {
 };
 
 static struct platform_device *sh7366_devices[] __initdata = {
+        &iic_device,
         &sci_device,
+        &vpu_device,
+        &veu0_device,
+        &veu1_device,
 };
 
 static int __init sh7366_devices_setup(void)
 {
+        clk_always_enable("mstp031"); /* TLB */
+        clk_always_enable("mstp030"); /* IC */
+        clk_always_enable("mstp029"); /* OC */
+        clk_always_enable("mstp028"); /* RSMEM */
+        clk_always_enable("mstp026"); /* XYMEM */
+        clk_always_enable("mstp023"); /* INTC3 */
+        clk_always_enable("mstp022"); /* INTC */
+        clk_always_enable("mstp020"); /* SuperHyway */
+        clk_always_enable("mstp109"); /* I2C */
+        clk_always_enable("mstp207"); /* VEU-2 */
+        clk_always_enable("mstp202"); /* VEU-1 */
+        clk_always_enable("mstp201"); /* VPU */
+
+        platform_resource_setup_memory(&vpu_device, "vpu", 2 << 20);
+        platform_resource_setup_memory(&veu0_device, "veu0", 2 << 20);
+        platform_resource_setup_memory(&veu1_device, "veu1", 2 << 20);
+
         return platform_add_devices(sh7366_devices,
                                     ARRAY_SIZE(sh7366_devices));
 }
@@ -97,7 +224,7 @@ static struct intc_vect vectors[] __initdata = {
         INTC_VECT(SIU, 0xf80),
         INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
         INTC_VECT(TMU2, 0x440),
-        INTC_VECT(VEU2, 0x580), INTC_VECT(LCDC, 0x580),
+        INTC_VECT(VEU2, 0x560), INTC_VECT(LCDC, 0x580),
 };
 
 static struct intc_group groups[] __initdata = {
@@ -163,8 +290,14 @@ static struct intc_sense_reg sense_registers[] __initdata = {
           { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
 };
 
-static DECLARE_INTC_DESC(intc_desc, "sh7366", vectors, groups,
-                         mask_registers, prio_registers, sense_registers);
+static struct intc_mask_reg ack_registers[] __initdata = {
+        { 0xa4140024, 0, 8, /* INTREQ00 */
+          { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static DECLARE_INTC_DESC_ACK(intc_desc, "sh7366", vectors, groups,
+                             mask_registers, prio_registers, sense_registers,
+                             ack_registers);
 
 void __init plat_irq_setup(void)
 {
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
index 62ebccf18b3c..de1ede92176e 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
@@ -12,6 +12,8 @@
 #include <linux/serial.h>
 #include <linux/serial_sci.h>
 #include <linux/mm.h>
+#include <linux/uio_driver.h>
+#include <asm/clock.h>
 #include <asm/mmzone.h>
 
 static struct resource usbf_resources[] = {
@@ -59,6 +61,62 @@ static struct platform_device iic_device = {
         .resource       = iic_resources,
 };
 
+static struct uio_info vpu_platform_data = {
+        .name = "VPU4",
+        .version = "0",
+        .irq = 60,
+};
+
+static struct resource vpu_resources[] = {
+        [0] = {
+                .name   = "VPU",
+                .start  = 0xfe900000,
+                .end    = 0xfe9022eb,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                /* place holder for contiguous memory */
+        },
+};
+
+static struct platform_device vpu_device = {
+        .name           = "uio_pdrv_genirq",
+        .id             = 0,
+        .dev = {
+                .platform_data  = &vpu_platform_data,
+        },
+        .resource       = vpu_resources,
+        .num_resources  = ARRAY_SIZE(vpu_resources),
+};
+
+static struct uio_info veu_platform_data = {
+        .name = "VEU",
+        .version = "0",
+        .irq = 54,
+};
+
+static struct resource veu_resources[] = {
+        [0] = {
+                .name   = "VEU",
+                .start  = 0xfe920000,
+                .end    = 0xfe9200b7,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                /* place holder for contiguous memory */
+        },
+};
+
+static struct platform_device veu_device = {
+        .name           = "uio_pdrv_genirq",
+        .id             = 1,
+        .dev = {
+                .platform_data  = &veu_platform_data,
+        },
+        .resource       = veu_resources,
+        .num_resources  = ARRAY_SIZE(veu_resources),
+};
+
 static struct plat_sci_port sci_platform_data[] = {
         {
                 .mapbase        = 0xffe00000,
@@ -95,10 +153,27 @@ static struct platform_device *sh7722_devices[] __initdata = {
         &usbf_device,
         &iic_device,
         &sci_device,
+        &vpu_device,
+        &veu_device,
 };
 
 static int __init sh7722_devices_setup(void)
 {
+        clk_always_enable("mstp031"); /* TLB */
+        clk_always_enable("mstp030"); /* IC */
+        clk_always_enable("mstp029"); /* OC */
+        clk_always_enable("mstp028"); /* URAM */
+        clk_always_enable("mstp026"); /* XYMEM */
+        clk_always_enable("mstp022"); /* INTC */
+        clk_always_enable("mstp020"); /* SuperHyway */
+        clk_always_enable("mstp109"); /* I2C */
+        clk_always_enable("mstp211"); /* USB */
+        clk_always_enable("mstp202"); /* VEU */
+        clk_always_enable("mstp201"); /* VPU */
+
+        platform_resource_setup_memory(&vpu_device, "vpu", 1 << 20);
+        platform_resource_setup_memory(&veu_device, "veu", 2 << 20);
+
         return platform_add_devices(sh7722_devices,
                                     ARRAY_SIZE(sh7722_devices));
 }
@@ -229,8 +304,14 @@ static struct intc_sense_reg sense_registers[] __initdata = {
           { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
 };
 
-static DECLARE_INTC_DESC(intc_desc, "sh7722", vectors, groups,
-                         mask_registers, prio_registers, sense_registers);
+static struct intc_mask_reg ack_registers[] __initdata = {
+        { 0xa4140024, 0, 8, /* INTREQ00 */
+          { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static DECLARE_INTC_DESC_ACK(intc_desc, "sh7722", vectors, groups,
+                             mask_registers, prio_registers, sense_registers,
+                             ack_registers);
 
 void __init plat_irq_setup(void)
 {
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
index a0470f2f5479..cd6baffdc896 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
@@ -12,8 +12,94 @@
 #include <linux/serial.h>
 #include <linux/mm.h>
 #include <linux/serial_sci.h>
+#include <linux/uio_driver.h>
+#include <asm/clock.h>
 #include <asm/mmzone.h>
 
+static struct uio_info vpu_platform_data = {
+        .name = "VPU5",
+        .version = "0",
+        .irq = 60,
+};
+
+static struct resource vpu_resources[] = {
+        [0] = {
+                .name   = "VPU",
+                .start  = 0xfe900000,
+                .end    = 0xfe902807,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                /* place holder for contiguous memory */
+        },
+};
+
+static struct platform_device vpu_device = {
+        .name           = "uio_pdrv_genirq",
+        .id             = 0,
+        .dev = {
+                .platform_data  = &vpu_platform_data,
+        },
+        .resource       = vpu_resources,
+        .num_resources  = ARRAY_SIZE(vpu_resources),
+};
+
+static struct uio_info veu0_platform_data = {
+        .name = "VEU",
+        .version = "0",
+        .irq = 54,
+};
+
+static struct resource veu0_resources[] = {
+        [0] = {
+                .name   = "VEU2H0",
+                .start  = 0xfe920000,
+                .end    = 0xfe92027b,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                /* place holder for contiguous memory */
+        },
+};
+
+static struct platform_device veu0_device = {
+        .name           = "uio_pdrv_genirq",
+        .id             = 1,
+        .dev = {
+                .platform_data  = &veu0_platform_data,
+        },
+        .resource       = veu0_resources,
+        .num_resources  = ARRAY_SIZE(veu0_resources),
+};
+
+static struct uio_info veu1_platform_data = {
+        .name = "VEU",
+        .version = "0",
+        .irq = 27,
+};
+
+static struct resource veu1_resources[] = {
+        [0] = {
+                .name   = "VEU2H1",
+                .start  = 0xfe924000,
+                .end    = 0xfe92427b,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                /* place holder for contiguous memory */
+        },
+};
+
+static struct platform_device veu1_device = {
+        .name           = "uio_pdrv_genirq",
+        .id             = 2,
+        .dev = {
+                .platform_data  = &veu1_platform_data,
+        },
+        .resource       = veu1_resources,
+        .num_resources  = ARRAY_SIZE(veu1_resources),
+};
+
 static struct plat_sci_port sci_platform_data[] = {
         {
                 .mapbase        = 0xffe00000,
@@ -113,14 +199,56 @@ static struct platform_device sh7723_usb_host_device = {
         .resource       = sh7723_usb_host_resources,
 };
 
+static struct resource iic_resources[] = {
+        [0] = {
+                .name   = "IIC",
+                .start  = 0x04470000,
+                .end    = 0x04470017,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = 96,
+                .end    = 99,
+                .flags  = IORESOURCE_IRQ,
+       },
+};
+
+static struct platform_device iic_device = {
+        .name           = "i2c-sh_mobile",
+        .num_resources  = ARRAY_SIZE(iic_resources),
+        .resource       = iic_resources,
+};
+
 static struct platform_device *sh7723_devices[] __initdata = {
         &sci_device,
         &rtc_device,
+        &iic_device,
         &sh7723_usb_host_device,
+        &vpu_device,
+        &veu0_device,
+        &veu1_device,
 };
 
 static int __init sh7723_devices_setup(void)
 {
+        clk_always_enable("mstp031"); /* TLB */
+        clk_always_enable("mstp030"); /* IC */
+        clk_always_enable("mstp029"); /* OC */
+        clk_always_enable("mstp024"); /* FPU */
+        clk_always_enable("mstp022"); /* INTC */
+        clk_always_enable("mstp020"); /* SuperHyway */
+        clk_always_enable("mstp000"); /* MERAM */
+        clk_always_enable("mstp109"); /* I2C */
+        clk_always_enable("mstp108"); /* RTC */
+        clk_always_enable("mstp211"); /* USB */
+        clk_always_enable("mstp206"); /* VEU2H1 */
+        clk_always_enable("mstp202"); /* VEU2H0 */
+        clk_always_enable("mstp201"); /* VPU */
+
+        platform_resource_setup_memory(&vpu_device, "vpu", 2 << 20);
+        platform_resource_setup_memory(&veu0_device, "veu0", 2 << 20);
+        platform_resource_setup_memory(&veu1_device, "veu1", 2 << 20);
+
         return platform_add_devices(sh7723_devices,
                                     ARRAY_SIZE(sh7723_devices));
 }
@@ -326,8 +454,14 @@ static struct intc_sense_reg sense_registers[] __initdata = {
           { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
 };
 
-static DECLARE_INTC_DESC(intc_desc, "sh7723", vectors, groups,
-                         mask_registers, prio_registers, sense_registers);
+static struct intc_mask_reg ack_registers[] __initdata = {
+        { 0xa4140024, 0, 8, /* INTREQ00 */
+          { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static DECLARE_INTC_DESC_ACK(intc_desc, "sh7723", vectors, groups,
+                             mask_registers, prio_registers, sense_registers,
+                             ack_registers);
 
 void __init plat_irq_setup(void)
 {
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
index f189a559462b..3c5b629887a8 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
@@ -3,6 +3,7 @@
  *
  *  Copyright (C) 2006  Paul Mundt
  *  Copyright (C) 2007  Yoshihiro Shimoda
+ *  Copyright (C) 2008  Nobuhiro Iwamatsu
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -56,6 +57,11 @@ static struct plat_sci_port sci_platform_data[] = {
                 .type           = PORT_SCIF,
                 .irqs           = { 76, 77, 79, 78 },
         }, {
+                .mapbase        = 0xffe10000,
+                .flags          = UPF_BOOT_AUTOCONF,
+                .type           = PORT_SCIF,
+                .irqs           = { 104, 105, 107, 106 },
+        }, {
                 .flags = 0,
         }
 };
@@ -208,8 +214,8 @@ static struct intc_vect vectors[] __initdata = {
         INTC_VECT(TMU5, 0xe40), INTC_VECT(ADC, 0xe60),
         INTC_VECT(SSI0, 0xe80), INTC_VECT(SSI1, 0xea0),
         INTC_VECT(SSI2, 0xec0), INTC_VECT(SSI3, 0xee0),
-        INTC_VECT(SCIF1_ERI, 0xf00), INTC_VECT(SCIF1_RXI, 0xf20),
-        INTC_VECT(SCIF1_BRI, 0xf40), INTC_VECT(SCIF1_TXI, 0xf60),
+        INTC_VECT(SCIF2_ERI, 0xf00), INTC_VECT(SCIF2_RXI, 0xf20),
+        INTC_VECT(SCIF2_BRI, 0xf40), INTC_VECT(SCIF2_TXI, 0xf60),
         INTC_VECT(GPIO_CH0, 0xf80), INTC_VECT(GPIO_CH1, 0xfa0),
         INTC_VECT(GPIO_CH2, 0xfc0), INTC_VECT(GPIO_CH3, 0xfe0),
 };
@@ -290,9 +296,14 @@ static struct intc_sense_reg irq_sense_registers[] __initdata = {
                                             IRQ4, IRQ5, IRQ6, IRQ7 } },
 };
 
-static DECLARE_INTC_DESC(intc_irq_desc, "sh7763-irq", irq_vectors,
-                        NULL, irq_mask_registers, irq_prio_registers,
-                        irq_sense_registers);
+static struct intc_mask_reg irq_ack_registers[] __initdata = {
+        { 0xffd00024, 0, 32, /* INTREQ */
+          { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static DECLARE_INTC_DESC_ACK(intc_irq_desc, "sh7763-irq", irq_vectors,
+                             NULL, irq_mask_registers, irq_prio_registers,
+                             irq_sense_registers, irq_ack_registers);
 
 
 /* External interrupt pins in IRL mode */
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
index 18dbbe23fea1..fb8200cc7440 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
@@ -217,9 +217,14 @@ static struct intc_sense_reg irq_sense_registers[] __initdata = {
                                             IRQ4, IRQ5, IRQ6, IRQ7 } },
 };
 
-static DECLARE_INTC_DESC(intc_irq_desc, "sh7780-irq", irq_vectors,
-                         NULL, irq_mask_registers, irq_prio_registers,
-                         irq_sense_registers);
+static struct intc_mask_reg irq_ack_registers[] __initdata = {
+        { 0xffd00024, 0, 32, /* INTREQ */
+          { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static DECLARE_INTC_DESC_ACK(intc_irq_desc, "sh7780-irq", irq_vectors,
+                             NULL, irq_mask_registers, irq_prio_registers,
+                             irq_sense_registers, irq_ack_registers);
 
 /* External interrupt pins in IRL mode */
 
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
index 621e7329ec63..30baa63b24c8 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
@@ -238,13 +238,18 @@ static struct intc_sense_reg sense_registers[] __initdata = {
                                             IRQ4, IRQ5, IRQ6, IRQ7 } },
 };
 
-static DECLARE_INTC_DESC(intc_desc_irq0123, "sh7785-irq0123", vectors_irq0123,
-                         NULL, mask_registers, prio_registers,
-                         sense_registers);
+static struct intc_mask_reg ack_registers[] __initdata = {
+        { 0xffd00024, 0, 32, /* INTREQ */
+          { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static DECLARE_INTC_DESC_ACK(intc_desc_irq0123, "sh7785-irq0123",
+                             vectors_irq0123, NULL, mask_registers,
+                             prio_registers, sense_registers, ack_registers);
 
-static DECLARE_INTC_DESC(intc_desc_irq4567, "sh7785-irq4567", vectors_irq4567,
-                         NULL, mask_registers, prio_registers,
-                         sense_registers);
+static DECLARE_INTC_DESC_ACK(intc_desc_irq4567, "sh7785-irq4567",
+                             vectors_irq4567, NULL, mask_registers,
+                             prio_registers, sense_registers, ack_registers);
 
 /* External interrupt pins in IRL mode */
 
diff --git a/arch/sh/kernel/cpu/sh5/entry.S b/arch/sh/kernel/cpu/sh5/entry.S
index 05372ed6c568..ca08e7f26a3a 100644
--- a/arch/sh/kernel/cpu/sh5/entry.S
+++ b/arch/sh/kernel/cpu/sh5/entry.S
@@ -11,7 +11,7 @@
  */
 #include <linux/errno.h>
 #include <linux/sys.h>
-#include <asm/cpu/registers.h>
+#include <cpu/registers.h>
 #include <asm/processor.h>
 #include <asm/unistd.h>
 #include <asm/thread_info.h>
diff --git a/arch/sh/kernel/entry-common.S b/arch/sh/kernel/entry-common.S
index 718bd2356b34..5e0dd1933847 100644
--- a/arch/sh/kernel/entry-common.S
+++ b/arch/sh/kernel/entry-common.S
@@ -192,7 +192,7 @@ work_resched:
         .align  2
 1:      .long   schedule
 2:      .long   do_notify_resume
-3:      .long   restore_all
+3:      .long   resume_userspace
 #ifdef CONFIG_TRACE_IRQFLAGS
 4:      .long   trace_hardirqs_on
 5:      .long   trace_hardirqs_off
diff --git a/arch/sh/kernel/head_64.S b/arch/sh/kernel/head_64.S
index f42d4c0feb76..7ccfb995a398 100644
--- a/arch/sh/kernel/head_64.S
+++ b/arch/sh/kernel/head_64.S
@@ -11,8 +11,8 @@
 #include <asm/page.h>
 #include <asm/cache.h>
 #include <asm/tlb.h>
-#include <asm/cpu/registers.h>
-#include <asm/cpu/mmu_context.h>
+#include <cpu/registers.h>
+#include <cpu/mmu_context.h>
 #include <asm/thread_info.h>
 
 /*
diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c
index a2a99e487e33..64b7690c664c 100644
--- a/arch/sh/kernel/irq.c
+++ b/arch/sh/kernel/irq.c
@@ -15,7 +15,7 @@
 #include <asm/machvec.h>
 #include <asm/uaccess.h>
 #include <asm/thread_info.h>
-#include <asm/cpu/mmu_context.h>
+#include <cpu/mmu_context.h>
 
 atomic_t irq_err_count;
 
diff --git a/arch/sh/kernel/process_32.c b/arch/sh/kernel/process_32.c
index 921892c351da..3326a45749d9 100644
--- a/arch/sh/kernel/process_32.c
+++ b/arch/sh/kernel/process_32.c
@@ -34,18 +34,6 @@ void (*pm_idle)(void);
 void (*pm_power_off)(void);
 EXPORT_SYMBOL(pm_power_off);
 
-void disable_hlt(void)
-{
-        hlt_counter++;
-}
-EXPORT_SYMBOL(disable_hlt);
-
-void enable_hlt(void)
-{
-        hlt_counter--;
-}
-EXPORT_SYMBOL(enable_hlt);
-
 static int __init nohlt_setup(char *__unused)
 {
         hlt_counter = 1;
@@ -60,7 +48,7 @@ static int __init hlt_setup(char *__unused)
 }
 __setup("hlt", hlt_setup);
 
-void default_idle(void)
+static void default_idle(void)
 {
         if (!hlt_counter) {
                 clear_thread_flag(TIF_POLLING_NRFLAG);
diff --git a/arch/sh/kernel/process_64.c b/arch/sh/kernel/process_64.c
index 0283d8133075..b9dbd2d3b4a5 100644
--- a/arch/sh/kernel/process_64.c
+++ b/arch/sh/kernel/process_64.c
@@ -36,16 +36,6 @@ static int hlt_counter = 1;
 
 #define HARD_IDLE_TIMEOUT (HZ / 3)
 
-void disable_hlt(void)
-{
-        hlt_counter++;
-}
-
-void enable_hlt(void)
-{
-        hlt_counter--;
-}
-
 static int __init nohlt_setup(char *__unused)
 {
         hlt_counter = 1;
diff --git a/arch/sh/kernel/ptrace_32.c b/arch/sh/kernel/ptrace_32.c
index fddb547f3c2b..2bc72def5cf8 100644
--- a/arch/sh/kernel/ptrace_32.c
+++ b/arch/sh/kernel/ptrace_32.c
@@ -241,6 +241,29 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
                 break;
         }
 #endif
+#ifdef CONFIG_BINFMT_ELF_FDPIC
+        case PTRACE_GETFDPIC: {
+                unsigned long tmp = 0;
+
+                switch (addr) {
+                case PTRACE_GETFDPIC_EXEC:
+                        tmp = child->mm->context.exec_fdpic_loadmap;
+                        break;
+                case PTRACE_GETFDPIC_INTERP:
+                        tmp = child->mm->context.interp_fdpic_loadmap;
+                        break;
+                default:
+                        break;
+                }
+
+                ret = 0;
+                if (put_user(tmp, (unsigned long *) data)) {
+                        ret = -EFAULT;
+                        break;
+                }
+                break;
+        }
+#endif
         default:
                 ret = ptrace_request(child, request, addr, data);
                 break;
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index bca2bbc575db..6339d0c95715 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -398,6 +398,7 @@ const char *get_cpu_subtype(struct sh_cpuinfo *c)
 {
         return cpu_name[c->type];
 }
+EXPORT_SYMBOL(get_cpu_subtype);
 
 #ifdef CONFIG_PROC_FS
 /* Symbolic CPU flags, keep in sync with asm/cpu-features.h */
@@ -452,6 +453,12 @@ static int show_cpuinfo(struct seq_file *m, void *v)
         seq_printf(m, "processor\t: %d\n", cpu);
         seq_printf(m, "cpu family\t: %s\n", init_utsname()->machine);
         seq_printf(m, "cpu type\t: %s\n", get_cpu_subtype(c));
+        if (c->cut_major == -1)
+                seq_printf(m, "cut\t\t: unknown\n");
+        else if (c->cut_minor == -1)
+                seq_printf(m, "cut\t\t: %d.x\n", c->cut_major);
+        else
+                seq_printf(m, "cut\t\t: %d.%d\n", c->cut_major, c->cut_minor);
 
         show_cpuflags(m, c);
 
diff --git a/arch/sh/kernel/signal_32.c b/arch/sh/kernel/signal_32.c
index f311551d9a05..4bbbde895a53 100644
--- a/arch/sh/kernel/signal_32.c
+++ b/arch/sh/kernel/signal_32.c
@@ -33,6 +33,11 @@
 
 #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
 
+struct fdpic_func_descriptor {
+        unsigned long   text;
+        unsigned long   GOT;
+};
+
 /*
  * Atomically swap in the new signal mask, and wait for a signal.
  */
@@ -368,6 +373,7 @@ static int setup_frame(int sig, struct k_sigaction *ka,
                 err |= __put_user(OR_R0_R0, &frame->retcode[6]);
                 err |= __put_user((__NR_sigreturn), &frame->retcode[7]);
                 regs->pr = (unsigned long) frame->retcode;
+                flush_icache_range(regs->pr, regs->pr + sizeof(frame->retcode));
         }
 
         if (err)
@@ -378,18 +384,21 @@ static int setup_frame(int sig, struct k_sigaction *ka,
         regs->regs[4] = signal; /* Arg for signal handler */
         regs->regs[5] = 0;
         regs->regs[6] = (unsigned long) &frame->sc;
-        regs->pc = (unsigned long) ka->sa.sa_handler;
+
+        if (current->personality & FDPIC_FUNCPTRS) {
+                struct fdpic_func_descriptor __user *funcptr =
+                        (struct fdpic_func_descriptor __user *)ka->sa.sa_handler;
+
+                __get_user(regs->pc, &funcptr->text);
+                __get_user(regs->regs[12], &funcptr->GOT);
+        } else
+                regs->pc = (unsigned long)ka->sa.sa_handler;
 
         set_fs(USER_DS);
 
         pr_debug("SIG deliver (%s:%d): sp=%p pc=%08lx pr=%08lx\n",
                  current->comm, task_pid_nr(current), frame, regs->pc, regs->pr);
 
-        flush_cache_sigtramp(regs->pr);
-
-        if ((-regs->pr & (L1_CACHE_BYTES-1)) < sizeof(frame->retcode))
-                flush_cache_sigtramp(regs->pr + L1_CACHE_BYTES);
-
         return 0;
 
 give_sigsegv:
@@ -458,17 +467,22 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
         regs->regs[4] = signal; /* Arg for signal handler */
         regs->regs[5] = (unsigned long) &frame->info;
         regs->regs[6] = (unsigned long) &frame->uc;
-        regs->pc = (unsigned long) ka->sa.sa_handler;
+
+        if (current->personality & FDPIC_FUNCPTRS) {
+                struct fdpic_func_descriptor __user *funcptr =
+                        (struct fdpic_func_descriptor __user *)ka->sa.sa_handler;
+
+                __get_user(regs->pc, &funcptr->text);
+                __get_user(regs->regs[12], &funcptr->GOT);
+        } else
+                regs->pc = (unsigned long)ka->sa.sa_handler;
 
         set_fs(USER_DS);
 
         pr_debug("SIG deliver (%s:%d): sp=%p pc=%08lx pr=%08lx\n",
                  current->comm, task_pid_nr(current), frame, regs->pc, regs->pr);
 
-        flush_cache_sigtramp(regs->pr);
-
-        if ((-regs->pr & (L1_CACHE_BYTES-1)) < sizeof(frame->retcode))
-                flush_cache_sigtramp(regs->pr + L1_CACHE_BYTES);
+        flush_icache_range(regs->pr, regs->pr + sizeof(frame->retcode));
 
         return 0;
 
diff --git a/arch/sh/kernel/syscalls_32.S b/arch/sh/kernel/syscalls_32.S
index a46cc3a41148..0af693e65764 100644
--- a/arch/sh/kernel/syscalls_32.S
+++ b/arch/sh/kernel/syscalls_32.S
@@ -343,3 +343,9 @@ ENTRY(sys_call_table)
         .long sys_fallocate
         .long sys_timerfd_settime       /* 325 */
         .long sys_timerfd_gettime
+        .long sys_signalfd4
+        .long sys_eventfd2
+        .long sys_epoll_create1
+        .long sys_dup3                  /* 330 */
+        .long sys_pipe2
+        .long sys_inotify_init1
diff --git a/arch/sh/kernel/syscalls_64.S b/arch/sh/kernel/syscalls_64.S
index d5d7843aad94..0b436aa3cad7 100644
--- a/arch/sh/kernel/syscalls_64.S
+++ b/arch/sh/kernel/syscalls_64.S
@@ -381,3 +381,9 @@ sys_call_table:
         .long sys_fallocate
         .long sys_timerfd_settime
         .long sys_timerfd_gettime
+        .long sys_signalfd4             /* 355 */
+        .long sys_eventfd2
+        .long sys_epoll_create1
+        .long sys_dup3
+        .long sys_pipe2
+        .long sys_inotify_init1         /* 360 */
diff --git a/arch/sh/kernel/time_32.c b/arch/sh/kernel/time_32.c
index 7281342c044d..0758b5ee8180 100644
--- a/arch/sh/kernel/time_32.c
+++ b/arch/sh/kernel/time_32.c
@@ -211,7 +211,7 @@ unsigned long sh_hpt_frequency = 0;
 
 #define NSEC_PER_CYC_SHIFT      10
 
-struct clocksource clocksource_sh = {
+static struct clocksource clocksource_sh = {
         .name           = "SuperH",
         .rating         = 200,
         .mask           = CLOCKSOURCE_MASK(32),
diff --git a/arch/sh/kernel/time_64.c b/arch/sh/kernel/time_64.c
index 022a55f1c1d4..791edabf7d83 100644
--- a/arch/sh/kernel/time_64.c
+++ b/arch/sh/kernel/time_64.c
@@ -33,8 +33,8 @@
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/platform_device.h>
-#include <asm/cpu/registers.h>   /* required by inline __asm__ stmt. */
-#include <asm/cpu/irq.h>
+#include <cpu/registers.h>       /* required by inline __asm__ stmt. */
+#include <cpu/irq.h>
 #include <asm/addrspace.h>
 #include <asm/processor.h>
 #include <asm/uaccess.h>
diff --git a/arch/sh/kernel/timers/timer-tmu.c b/arch/sh/kernel/timers/timer-tmu.c
index 8935570008d2..1ca9ad49b541 100644
--- a/arch/sh/kernel/timers/timer-tmu.c
+++ b/arch/sh/kernel/timers/timer-tmu.c
@@ -209,7 +209,7 @@ static int tmu_timer_init(void)
         return 0;
 }
 
-struct sys_timer_ops tmu_timer_ops = {
+static struct sys_timer_ops tmu_timer_ops = {
         .init           = tmu_timer_init,
         .start          = tmu_timer_start,
         .stop           = tmu_timer_stop,
diff --git a/arch/sh/kernel/traps_32.c b/arch/sh/kernel/traps_32.c
index e08b3bfeb656..511a9426cec5 100644
--- a/arch/sh/kernel/traps_32.c
+++ b/arch/sh/kernel/traps_32.c
@@ -43,6 +43,7 @@
 # define TRAP_ILLEGAL_SLOT_INST 6
 # define TRAP_ADDRESS_ERROR     9
 # ifdef CONFIG_CPU_SH2A
+#  define TRAP_FPU_ERROR        13
 #  define TRAP_DIVZERO_ERROR    17
 #  define TRAP_DIVOVF_ERROR     18
 # endif
@@ -851,6 +852,9 @@ void __init trap_init(void)
 #ifdef CONFIG_CPU_SH2A
         set_exception_table_vec(TRAP_DIVZERO_ERROR, do_divide_error);
         set_exception_table_vec(TRAP_DIVOVF_ERROR, do_divide_error);
+#ifdef CONFIG_SH_FPU
+        set_exception_table_vec(TRAP_FPU_ERROR, fpu_error_trap_handler);
+#endif
 #endif
 
         /* Setup VBR for boot cpu */
diff --git a/arch/sh/lib/Makefile b/arch/sh/lib/Makefile
index ebb55d1149f5..8596cc78e18d 100644
--- a/arch/sh/lib/Makefile
+++ b/arch/sh/lib/Makefile
@@ -2,9 +2,11 @@
 # Makefile for SuperH-specific library files..
 #
 
-lib-y  = delay.o io.o memset.o memmove.o memchr.o \
+lib-y  = delay.o memset.o memmove.o memchr.o \
          checksum.o strlen.o div64.o div64-generic.o
 
+obj-y                           += io.o
+
 memcpy-y                        := memcpy.o
 memcpy-$(CONFIG_CPU_SH4)        := memcpy-sh4.o
 
diff --git a/arch/sh/lib64/panic.c b/arch/sh/lib64/panic.c
index ff559e2a96f7..da32ba7b5fcc 100644
--- a/arch/sh/lib64/panic.c
+++ b/arch/sh/lib64/panic.c
@@ -8,7 +8,7 @@
 
 #include <linux/kernel.h>
 #include <asm/io.h>
-#include <asm/cpu/registers.h>
+#include <cpu/registers.h>
 
 /* THIS IS A PHYSICAL ADDRESS */
 #define HDSP2534_ADDR (0x04002100)
diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
index 5fd218430b19..56d0a7daa34b 100644
--- a/arch/sh/mm/Kconfig
+++ b/arch/sh/mm/Kconfig
@@ -145,25 +145,39 @@ choice
 
 config PAGE_SIZE_4KB
         bool "4kB"
-        depends on !X2TLB
+        depends on !MMU || !X2TLB
         help
           This is the default page size used by all SuperH CPUs.
 
 config PAGE_SIZE_8KB
         bool "8kB"
-        depends on X2TLB
+        depends on !MMU || X2TLB
         help
           This enables 8kB pages as supported by SH-X2 and later MMUs.
 
+config PAGE_SIZE_16KB
+        bool "16kB"
+        depends on !MMU
+        help
+          This enables 16kB pages on MMU-less SH systems.
+
 config PAGE_SIZE_64KB
         bool "64kB"
-        depends on CPU_SH4 || CPU_SH5
+        depends on !MMU || CPU_SH4 || CPU_SH5
         help
           This enables support for 64kB pages, possible on all SH-4
           CPUs and later.
 
 endchoice
 
+config ENTRY_OFFSET
+        hex
+        default "0x00001000" if PAGE_SIZE_4KB
+        default "0x00002000" if PAGE_SIZE_8KB
+        default "0x00004000" if PAGE_SIZE_16KB
+        default "0x00010000" if PAGE_SIZE_64KB
+        default "0x00000000"
+
 choice
         prompt "HugeTLB page size"
         depends on HUGETLB_PAGE && (CPU_SH4 || CPU_SH5) && MMU
diff --git a/arch/sh/mm/cache-debugfs.c b/arch/sh/mm/cache-debugfs.c
index c5b56d52b7d2..0e189ccd4a77 100644
--- a/arch/sh/mm/cache-debugfs.c
+++ b/arch/sh/mm/cache-debugfs.c
@@ -120,7 +120,7 @@ static const struct file_operations cache_debugfs_fops = {
         .open           = cache_debugfs_open,
         .read           = seq_read,
         .llseek         = seq_lseek,
-        .release        = seq_release,
+        .release        = single_release,
 };
 
 static int __init cache_debugfs_init(void)
diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c
index 43d7ff6b6ec7..1fdc8d90254a 100644
--- a/arch/sh/mm/cache-sh4.c
+++ b/arch/sh/mm/cache-sh4.c
@@ -4,6 +4,7 @@
  * Copyright (C) 1999, 2000, 2002  Niibe Yutaka
  * Copyright (C) 2001 - 2007  Paul Mundt
  * Copyright (C) 2003  Richard Curnow
+ * Copyright (c) 2007 STMicroelectronics (R&D) Ltd.
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -22,6 +23,7 @@
  * entirety.
  */
 #define MAX_DCACHE_PAGES        64      /* XXX: Tune for ways */
+#define MAX_ICACHE_PAGES        32
 
 static void __flush_dcache_segment_1way(unsigned long start,
                                         unsigned long extent);
@@ -178,42 +180,45 @@ void __flush_invalidate_region(void *start, int size)
 /*
  * Write back the range of D-cache, and purge the I-cache.
  *
- * Called from kernel/module.c:sys_init_module and routine for a.out format.
+ * Called from kernel/module.c:sys_init_module and routine for a.out format,
+ * signal handler code and kprobes code
  */
 void flush_icache_range(unsigned long start, unsigned long end)
 {
-        flush_cache_all();
-}
-
-/*
- * Write back the D-cache and purge the I-cache for signal trampoline.
- * .. which happens to be the same behavior as flush_icache_range().
- * So, we simply flush out a line.
- */
-void __uses_jump_to_uncached flush_cache_sigtramp(unsigned long addr)
-{
-        unsigned long v, index;
-        unsigned long flags;
+        int icacheaddr;
+        unsigned long flags, v;
         int i;
 
-        v = addr & ~(L1_CACHE_BYTES-1);
-        asm volatile("ocbwb     %0"
-                     : /* no output */
-                     : "m" (__m(v)));
-
-        index = CACHE_IC_ADDRESS_ARRAY |
-                        (v & boot_cpu_data.icache.entry_mask);
-
-        local_irq_save(flags);
-        jump_to_uncached();
-
-        for (i = 0; i < boot_cpu_data.icache.ways;
-             i++, index += boot_cpu_data.icache.way_incr)
-                ctrl_outl(0, index);    /* Clear out Valid-bit */
-
-        back_to_cached();
-        wmb();
-        local_irq_restore(flags);
+       /* If there are too many pages then just blow the caches */
+        if (((end - start) >> PAGE_SHIFT) >= MAX_ICACHE_PAGES) {
+                flush_cache_all();
+       } else {
+               /* selectively flush d-cache then invalidate the i-cache */
+               /* this is inefficient, so only use for small ranges */
+               start &= ~(L1_CACHE_BYTES-1);
+               end += L1_CACHE_BYTES-1;
+               end &= ~(L1_CACHE_BYTES-1);
+
+               local_irq_save(flags);
+               jump_to_uncached();
+
+               for (v = start; v < end; v+=L1_CACHE_BYTES) {
+                       asm volatile("ocbwb     %0"
+                                    : /* no output */
+                                    : "m" (__m(v)));
+
+                       icacheaddr = CACHE_IC_ADDRESS_ARRAY | (
+                                       v & cpu_data->icache.entry_mask);
+
+                       for (i = 0; i < cpu_data->icache.ways;
+                               i++, icacheaddr += cpu_data->icache.way_incr)
+                                       /* Clear i-cache line valid-bit */
+                                       ctrl_outl(0, icacheaddr);
+               }
+
+                back_to_cached();
+                local_irq_restore(flags);
+        }
 }
 
 static inline void flush_cache_4096(unsigned long start,
diff --git a/arch/sh/mm/consistent.c b/arch/sh/mm/consistent.c
index d3c33fc5b1c2..b2ce014401b5 100644
--- a/arch/sh/mm/consistent.c
+++ b/arch/sh/mm/consistent.c
@@ -10,6 +10,7 @@
  * for more details.
  */
 #include <linux/mm.h>
+#include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <asm/cacheflush.h>
 #include <asm/addrspace.h>
@@ -27,21 +28,10 @@ void *dma_alloc_coherent(struct device *dev, size_t size,
                            dma_addr_t *dma_handle, gfp_t gfp)
 {
         void *ret, *ret_nocache;
-        struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL;
         int order = get_order(size);
 
-        if (mem) {
-                int page = bitmap_find_free_region(mem->bitmap, mem->size,
-                                                     order);
-                if (page >= 0) {
-                        *dma_handle = mem->device_base + (page << PAGE_SHIFT);
-                        ret = mem->virt_base + (page << PAGE_SHIFT);
-                        memset(ret, 0, size);
-                        return ret;
-                }
-                if (mem->flags & DMA_MEMORY_EXCLUSIVE)
-                        return NULL;
-        }
+        if (dma_alloc_from_coherent(dev, size, dma_handle, &ret))
+                return ret;
 
         ret = (void *)__get_free_pages(gfp, order);
         if (!ret)
@@ -71,11 +61,7 @@ void dma_free_coherent(struct device *dev, size_t size,
         struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL;
         int order = get_order(size);
 
-        if (mem && vaddr >= mem->virt_base && vaddr < (mem->virt_base + (mem->size << PAGE_SHIFT))) {
-                int page = (vaddr - mem->virt_base) >> PAGE_SHIFT;
-
-                bitmap_release_region(mem->bitmap, page, order);
-        } else {
+        if (!dma_release_from_coherent(dev, order, vaddr)) {
                 WARN_ON(irqs_disabled());       /* for portability */
                 BUG_ON(mem && mem->flags & DMA_MEMORY_EXCLUSIVE);
                 free_pages((unsigned long)phys_to_virt(dma_handle), order);
@@ -84,83 +70,6 @@ void dma_free_coherent(struct device *dev, size_t size,
 }
 EXPORT_SYMBOL(dma_free_coherent);
 
-int dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr,
-                                dma_addr_t device_addr, size_t size, int flags)
-{
-        void __iomem *mem_base = NULL;
-        int pages = size >> PAGE_SHIFT;
-        int bitmap_size = BITS_TO_LONGS(pages) * sizeof(long);
-
-        if ((flags & (DMA_MEMORY_MAP | DMA_MEMORY_IO)) == 0)
-                goto out;
-        if (!size)
-                goto out;
-        if (dev->dma_mem)
-                goto out;
-
-        /* FIXME: this routine just ignores DMA_MEMORY_INCLUDES_CHILDREN */
-
-        mem_base = ioremap_nocache(bus_addr, size);
-        if (!mem_base)
-                goto out;
-
-        dev->dma_mem = kmalloc(sizeof(struct dma_coherent_mem), GFP_KERNEL);
-        if (!dev->dma_mem)
-                goto out;
-        dev->dma_mem->bitmap = kzalloc(bitmap_size, GFP_KERNEL);
-        if (!dev->dma_mem->bitmap)
-                goto free1_out;
-
-        dev->dma_mem->virt_base = mem_base;
-        dev->dma_mem->device_base = device_addr;
-        dev->dma_mem->size = pages;
-        dev->dma_mem->flags = flags;
-
-        if (flags & DMA_MEMORY_MAP)
-                return DMA_MEMORY_MAP;
-
-        return DMA_MEMORY_IO;
-
- free1_out:
-        kfree(dev->dma_mem);
- out:
-        if (mem_base)
-                iounmap(mem_base);
-        return 0;
-}
-EXPORT_SYMBOL(dma_declare_coherent_memory);
-
-void dma_release_declared_memory(struct device *dev)
-{
-        struct dma_coherent_mem *mem = dev->dma_mem;
-
-        if (!mem)
-                return;
-        dev->dma_mem = NULL;
-        iounmap(mem->virt_base);
-        kfree(mem->bitmap);
-        kfree(mem);
-}
-EXPORT_SYMBOL(dma_release_declared_memory);
-
-void *dma_mark_declared_memory_occupied(struct device *dev,
-                                        dma_addr_t device_addr, size_t size)
-{
-        struct dma_coherent_mem *mem = dev->dma_mem;
-        int pages = (size + (device_addr & ~PAGE_MASK) + PAGE_SIZE - 1) >> PAGE_SHIFT;
-        int pos, err;
-
-        if (!mem)
-                return ERR_PTR(-EINVAL);
-
-        pos = (device_addr - mem->device_base) >> PAGE_SHIFT;
-        err = bitmap_allocate_region(mem->bitmap, pos, get_order(pages));
-        if (err != 0)
-                return ERR_PTR(err);
-        return mem->virt_base + (pos << PAGE_SHIFT);
-}
-EXPORT_SYMBOL(dma_mark_declared_memory_occupied);
-
 void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
                     enum dma_data_direction direction)
 {
@@ -185,3 +94,32 @@ void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
         }
 }
 EXPORT_SYMBOL(dma_cache_sync);
+
+int platform_resource_setup_memory(struct platform_device *pdev,
+                                   char *name, unsigned long memsize)
+{
+        struct resource *r;
+        dma_addr_t dma_handle;
+        void *buf;
+
+        r = pdev->resource + pdev->num_resources - 1;
+        if (r->flags) {
+                pr_warning("%s: unable to find empty space for resource\n",
+                        name);
+                return -EINVAL;
+        }
+
+        buf = dma_alloc_coherent(NULL, memsize, &dma_handle, GFP_KERNEL);
+        if (!buf) {
+                pr_warning("%s: unable to allocate memory\n", name);
+                return -ENOMEM;
+        }
+
+        memset(buf, 0, memsize);
+
+        r->flags = IORESOURCE_MEM;
+        r->start = dma_handle;
+        r->end = r->start + memsize - 1;
+        r->name = name;
+        return 0;
+}
diff --git a/arch/sh/mm/fault_32.c b/arch/sh/mm/fault_32.c
index d1fa27594c6e..0c776fdfbdda 100644
--- a/arch/sh/mm/fault_32.c
+++ b/arch/sh/mm/fault_32.c
@@ -37,16 +37,12 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs,
         int fault;
         siginfo_t info;
 
-        trace_hardirqs_on();
-        local_irq_enable();
-
 #ifdef CONFIG_SH_KGDB
         if (kgdb_nofault && kgdb_bus_err_hook)
                 kgdb_bus_err_hook();
 #endif
 
         tsk = current;
-        mm = tsk->mm;
         si_code = SEGV_MAPERR;
 
         if (unlikely(address >= TASK_SIZE)) {
@@ -88,6 +84,14 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs,
                 return;
         }
 
+        /* Only enable interrupts if they were on before the fault */
+        if ((regs->sr & SR_IMASK) != SR_IMASK) {
+                trace_hardirqs_on();
+                local_irq_enable();
+        }
+
+        mm = tsk->mm;
+
         /*
          * If we're in an interrupt or have no user
          * context, we must not take the fault..
diff --git a/arch/sh/mm/fault_64.c b/arch/sh/mm/fault_64.c
index 399d53710d2f..bd63b961b2a9 100644
--- a/arch/sh/mm/fault_64.c
+++ b/arch/sh/mm/fault_64.c
@@ -39,7 +39,7 @@
 #include <asm/uaccess.h>
 #include <asm/pgalloc.h>
 #include <asm/mmu_context.h>
-#include <asm/cpu/registers.h>
+#include <cpu/registers.h>
 
 /* Callable from fault.c, so not static */
 inline void __do_tlb_refill(unsigned long address,
diff --git a/arch/sh/mm/pg-sh4.c b/arch/sh/mm/pg-sh4.c
index 8c7a9ca79879..38870e0fc182 100644
--- a/arch/sh/mm/pg-sh4.c
+++ b/arch/sh/mm/pg-sh4.c
@@ -111,7 +111,7 @@ EXPORT_SYMBOL(copy_user_highpage);
 /*
  * For SH-4, we have our own implementation for ptep_get_and_clear
  */
-inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
 {
         pte_t pte = *ptep;
 
diff --git a/arch/sh/mm/pg-sh7705.c b/arch/sh/mm/pg-sh7705.c
index 7f885b7f8aff..eaf25147194c 100644
--- a/arch/sh/mm/pg-sh7705.c
+++ b/arch/sh/mm/pg-sh7705.c
@@ -118,7 +118,7 @@ void copy_user_page(void *to, void *from, unsigned long address, struct page *pg
  * For SH7705, we have our own implementation for ptep_get_and_clear
  * Copied from pg-sh4.c
  */
-inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
 {
         pte_t pte = *ptep;
 
diff --git a/arch/sh/mm/pmb.c b/arch/sh/mm/pmb.c
index 46911bcbf17b..cef727669c87 100644
--- a/arch/sh/mm/pmb.c
+++ b/arch/sh/mm/pmb.c
@@ -385,7 +385,7 @@ static const struct file_operations pmb_debugfs_fops = {
         .open           = pmb_debugfs_open,
         .read           = seq_read,
         .llseek         = seq_lseek,
-        .release        = seq_release,
+        .release        = single_release,
 };
 
 static int __init pmb_debugfs_init(void)
diff --git a/arch/sh/tools/Makefile b/arch/sh/tools/Makefile
index 567516b58acc..b5d202be8206 100644
--- a/arch/sh/tools/Makefile
+++ b/arch/sh/tools/Makefile
@@ -10,7 +10,7 @@
 # Shamelessly cloned from ARM.
 #
 
-include/asm-sh/machtypes.h: $(src)/gen-mach-types $(src)/mach-types
+arch/sh/include/asm/machtypes.h: $(src)/gen-mach-types $(src)/mach-types
         @echo '  Generating $@'
-        $(Q)if [ ! -d include/asm-sh ]; then mkdir -p include/asm-sh; fi
+        $(Q)if [ ! -d arch/sh/include/asm ]; then mkdir -p arch/sh/include/asm; fi
         $(Q)$(AWK) -f $^ > $@ || { rm -f $@; /bin/false; }
diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types
index 1bba7d36be90..0a11cc08f0a5 100644
--- a/arch/sh/tools/mach-types
+++ b/arch/sh/tools/mach-types
@@ -46,3 +46,7 @@ R2D_1			RTS7751R2D_1
 CAYMAN                  SH_CAYMAN
 SDK7780                 SH_SDK7780
 MIGOR                   SH_MIGOR
+RSK7203                 SH_RSK7203
+AP325RXA                SH_AP325RXA
+SH7763RDP               SH_SH7763RDP
+SH7785LCR               SH_SH7785LCR
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 375de7c6d082..a214002114ed 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -68,6 +68,7 @@ config SPARC
         select HAVE_IDE
         select HAVE_OPROFILE
         select HAVE_ARCH_KGDB if !SMP
+        select HAVE_ARCH_TRACEHOOK
 
 # Identify this as a Sparc32 build
 config SPARC32
diff --git a/arch/sparc/include/asm/Kbuild b/arch/sparc/include/asm/Kbuild
new file mode 100644
index 000000000000..a5f0ce734ff7
--- /dev/null
+++ b/arch/sparc/include/asm/Kbuild
@@ -0,0 +1,45 @@
+# User exported sparc header files
+include include/asm-generic/Kbuild.asm
+
+header-y += ipcbuf_32.h
+header-y += ipcbuf_64.h
+header-y += posix_types_32.h
+header-y += posix_types_64.h
+header-y += ptrace_32.h
+header-y += ptrace_64.h
+header-y += sigcontext_32.h
+header-y += sigcontext_64.h
+header-y += siginfo_32.h
+header-y += siginfo_64.h
+header-y += signal_32.h
+header-y += signal_64.h
+header-y += stat_32.h
+header-y += stat_64.h
+header-y += statfs_32.h
+header-y += statfs_64.h
+header-y += unistd_32.h
+header-y += unistd_64.h
+
+header-y += apc.h
+header-y += asi.h
+header-y += bpp.h
+header-y += display7seg.h
+header-y += envctrl.h
+header-y += fbio.h
+header-y += jsflash.h
+header-y += openprom.h
+header-y += openprom_32.h
+header-y += openprom_64.h
+header-y += openpromio.h
+header-y += perfctr.h
+header-y += psrcompat.h
+header-y += psr.h
+header-y += pstate.h
+header-y += reg.h
+header-y += reg_32.h
+header-y += reg_64.h
+header-y += traps.h
+header-y += uctx.h
+header-y += utrap.h
+header-y += vfc_ioctls.h
+header-y += watchdog.h
diff --git a/include/asm-sparc/agp.h b/arch/sparc/include/asm/agp.h
index c2456870b05c..c2456870b05c 100644
--- a/include/asm-sparc/agp.h
+++ b/arch/sparc/include/asm/agp.h
diff --git a/include/asm-sparc/apb.h b/arch/sparc/include/asm/apb.h
index 8f3b57db810f..8f3b57db810f 100644
--- a/include/asm-sparc/apb.h
+++ b/arch/sparc/include/asm/apb.h
diff --git a/include/asm-sparc/apc.h b/arch/sparc/include/asm/apc.h
index 24e9a7d4d97e..24e9a7d4d97e 100644
--- a/include/asm-sparc/apc.h
+++ b/arch/sparc/include/asm/apc.h
diff --git a/include/asm-sparc/asi.h b/arch/sparc/include/asm/asi.h
index 74703c5ef985..74703c5ef985 100644
--- a/include/asm-sparc/asi.h
+++ b/arch/sparc/include/asm/asi.h
diff --git a/include/asm-sparc/asmmacro.h b/arch/sparc/include/asm/asmmacro.h
index a619a4d97aae..a619a4d97aae 100644
--- a/include/asm-sparc/asmmacro.h
+++ b/arch/sparc/include/asm/asmmacro.h
diff --git a/arch/sparc/include/asm/atomic.h b/arch/sparc/include/asm/atomic.h
new file mode 100644
index 000000000000..8ff83d8cc33f
--- /dev/null
+++ b/arch/sparc/include/asm/atomic.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_ATOMIC_H
+#define ___ASM_SPARC_ATOMIC_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/atomic_64.h>
+#else
+#include <asm/atomic_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/atomic_32.h b/arch/sparc/include/asm/atomic_32.h
index 5c944b5a8040..5c944b5a8040 100644
--- a/include/asm-sparc/atomic_32.h
+++ b/arch/sparc/include/asm/atomic_32.h
diff --git a/include/asm-sparc/atomic_64.h b/arch/sparc/include/asm/atomic_64.h
index 2c71ec4a3b18..2c71ec4a3b18 100644
--- a/include/asm-sparc/atomic_64.h
+++ b/arch/sparc/include/asm/atomic_64.h
diff --git a/arch/sparc/include/asm/auxio.h b/arch/sparc/include/asm/auxio.h
new file mode 100644
index 000000000000..13dc67f03011
--- /dev/null
+++ b/arch/sparc/include/asm/auxio.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_AUXIO_H
+#define ___ASM_SPARC_AUXIO_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/auxio_64.h>
+#else
+#include <asm/auxio_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/auxio_32.h b/arch/sparc/include/asm/auxio_32.h
new file mode 100644
index 000000000000..e03e088be95f
--- /dev/null
+++ b/arch/sparc/include/asm/auxio_32.h
@@ -0,0 +1,89 @@
+/*
+ * auxio.h:  Definitions and code for the Auxiliary I/O register.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+#ifndef _SPARC_AUXIO_H
+#define _SPARC_AUXIO_H
+
+#include <asm/system.h>
+#include <asm/vaddrs.h>
+
+/* This register is an unsigned char in IO space.  It does two things.
+ * First, it is used to control the front panel LED light on machines
+ * that have it (good for testing entry points to trap handlers and irq's)
+ * Secondly, it controls various floppy drive parameters.
+ */
+#define AUXIO_ORMEIN      0xf0    /* All writes must set these bits. */
+#define AUXIO_ORMEIN4M    0xc0    /* sun4m - All writes must set these bits. */
+#define AUXIO_FLPY_DENS   0x20    /* Floppy density, high if set. Read only. */
+#define AUXIO_FLPY_DCHG   0x10    /* A disk change occurred.  Read only. */
+#define AUXIO_EDGE_ON     0x10    /* sun4m - On means Jumper block is in. */
+#define AUXIO_FLPY_DSEL   0x08    /* Drive select/start-motor. Write only. */
+#define AUXIO_LINK_TEST   0x08    /* sun4m - On means TPE Carrier detect. */
+
+/* Set the following to one, then zero, after doing a pseudo DMA transfer. */
+#define AUXIO_FLPY_TCNT   0x04    /* Floppy terminal count. Write only. */
+
+/* Set the following to zero to eject the floppy. */
+#define AUXIO_FLPY_EJCT   0x02    /* Eject floppy disk.  Write only. */
+#define AUXIO_LED         0x01    /* On if set, off if unset. Read/Write */
+
+#ifndef __ASSEMBLY__
+
+/*
+ * NOTE: these routines are implementation dependent--
+ * understand the hardware you are querying!
+ */
+extern void set_auxio(unsigned char bits_on, unsigned char bits_off);
+extern unsigned char get_auxio(void); /* .../asm/floppy.h */
+
+/*
+ * The following routines are provided for driver-compatibility
+ * with sparc64 (primarily sunlance.c)
+ */
+
+#define AUXIO_LTE_ON    1
+#define AUXIO_LTE_OFF   0
+
+/* auxio_set_lte - Set Link Test Enable (TPE Link Detect)
+ *
+ * on - AUXIO_LTE_ON or AUXIO_LTE_OFF
+ */
+#define auxio_set_lte(on) \
+do { \
+        if(on) { \
+                set_auxio(AUXIO_LINK_TEST, 0); \
+        } else { \
+                set_auxio(0, AUXIO_LINK_TEST); \
+        } \
+} while (0)
+
+#define AUXIO_LED_ON    1
+#define AUXIO_LED_OFF   0
+
+/* auxio_set_led - Set system front panel LED
+ *
+ * on - AUXIO_LED_ON or AUXIO_LED_OFF
+ */
+#define auxio_set_led(on) \
+do { \
+        if(on) { \
+                set_auxio(AUXIO_LED, 0); \
+        } else { \
+                set_auxio(0, AUXIO_LED); \
+        } \
+} while (0)
+
+#endif /* !(__ASSEMBLY__) */
+
+
+/* AUXIO2 (Power Off Control) */
+extern __volatile__ unsigned char * auxio_power_register;
+
+#define AUXIO_POWER_DETECT_FAILURE      32
+#define AUXIO_POWER_CLEAR_FAILURE       2
+#define AUXIO_POWER_OFF                 1
+
+
+#endif /* !(_SPARC_AUXIO_H) */
diff --git a/include/asm-sparc/auxio_64.h b/arch/sparc/include/asm/auxio_64.h
index f61cd1e3e395..f61cd1e3e395 100644
--- a/include/asm-sparc/auxio_64.h
+++ b/arch/sparc/include/asm/auxio_64.h
diff --git a/include/asm-sparc/auxvec.h b/arch/sparc/include/asm/auxvec.h
index ad6f360261f6..ad6f360261f6 100644
--- a/include/asm-sparc/auxvec.h
+++ b/arch/sparc/include/asm/auxvec.h
diff --git a/include/asm-sparc/backoff.h b/arch/sparc/include/asm/backoff.h
index fa1fdf67e350..fa1fdf67e350 100644
--- a/include/asm-sparc/backoff.h
+++ b/arch/sparc/include/asm/backoff.h
diff --git a/include/asm-sparc/bbc.h b/arch/sparc/include/asm/bbc.h
index 423a85800aae..423a85800aae 100644
--- a/include/asm-sparc/bbc.h
+++ b/arch/sparc/include/asm/bbc.h
diff --git a/include/asm-sparc/bitext.h b/arch/sparc/include/asm/bitext.h
index 297b2f2fcb49..297b2f2fcb49 100644
--- a/include/asm-sparc/bitext.h
+++ b/arch/sparc/include/asm/bitext.h
diff --git a/arch/sparc/include/asm/bitops.h b/arch/sparc/include/asm/bitops.h
new file mode 100644
index 000000000000..b1edd94bd64f
--- /dev/null
+++ b/arch/sparc/include/asm/bitops.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_BITOPS_H
+#define ___ASM_SPARC_BITOPS_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/bitops_64.h>
+#else
+#include <asm/bitops_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/bitops_32.h b/arch/sparc/include/asm/bitops_32.h
index 68b98a7e6454..68b98a7e6454 100644
--- a/include/asm-sparc/bitops_32.h
+++ b/arch/sparc/include/asm/bitops_32.h
diff --git a/include/asm-sparc/bitops_64.h b/arch/sparc/include/asm/bitops_64.h
index bb87b8080220..bb87b8080220 100644
--- a/include/asm-sparc/bitops_64.h
+++ b/arch/sparc/include/asm/bitops_64.h
diff --git a/include/asm-sparc/bpp.h b/arch/sparc/include/asm/bpp.h
index 31f515e499a7..31f515e499a7 100644
--- a/include/asm-sparc/bpp.h
+++ b/arch/sparc/include/asm/bpp.h
diff --git a/arch/sparc/include/asm/btfixup.h b/arch/sparc/include/asm/btfixup.h
new file mode 100644
index 000000000000..797722cf69f2
--- /dev/null
+++ b/arch/sparc/include/asm/btfixup.h
@@ -0,0 +1,208 @@
+/*
+ *  asm/btfixup.h:    Macros for boot time linking.
+ *
+ *  Copyright (C) 1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ */
+ 
+#ifndef _SPARC_BTFIXUP_H
+#define _SPARC_BTFIXUP_H
+
+#include <linux/init.h>
+
+#ifndef __ASSEMBLY__
+
+#ifdef MODULE
+extern unsigned int ___illegal_use_of_BTFIXUP_SIMM13_in_module(void);
+extern unsigned int ___illegal_use_of_BTFIXUP_SETHI_in_module(void);
+extern unsigned int ___illegal_use_of_BTFIXUP_HALF_in_module(void);
+extern unsigned int ___illegal_use_of_BTFIXUP_INT_in_module(void);
+
+#define BTFIXUP_SIMM13(__name) ___illegal_use_of_BTFIXUP_SIMM13_in_module()
+#define BTFIXUP_HALF(__name) ___illegal_use_of_BTFIXUP_HALF_in_module()
+#define BTFIXUP_SETHI(__name) ___illegal_use_of_BTFIXUP_SETHI_in_module()
+#define BTFIXUP_INT(__name) ___illegal_use_of_BTFIXUP_INT_in_module()
+#define BTFIXUP_BLACKBOX(__name) ___illegal_use_of_BTFIXUP_BLACKBOX_in_module
+
+#else
+
+#define BTFIXUP_SIMM13(__name) ___sf_##__name()
+#define BTFIXUP_HALF(__name) ___af_##__name()
+#define BTFIXUP_SETHI(__name) ___hf_##__name()
+#define BTFIXUP_INT(__name) ((unsigned int)&___i_##__name)
+/* This must be written in assembly and present in a sethi */
+#define BTFIXUP_BLACKBOX(__name) ___b_##__name
+#endif /* MODULE */
+
+/* Fixup call xx */
+
+#define BTFIXUPDEF_CALL(__type, __name, __args...)                                      \
+        extern __type ___f_##__name(__args);                                            \
+        extern unsigned ___fs_##__name[3];
+#define BTFIXUPDEF_CALL_CONST(__type, __name, __args...)                                \
+        extern __type ___f_##__name(__args) __attribute_const__;                        \
+        extern unsigned ___fs_##__name[3];
+#define BTFIXUP_CALL(__name) ___f_##__name
+
+#define BTFIXUPDEF_BLACKBOX(__name)                                                     \
+        extern unsigned ___bs_##__name[2];
+
+/* Put bottom 13bits into some register variable */
+
+#define BTFIXUPDEF_SIMM13(__name)                                                       \
+        static inline unsigned int ___sf_##__name(void) __attribute_const__;            \
+        extern unsigned ___ss_##__name[2];                                              \
+        static inline unsigned int ___sf_##__name(void) {                               \
+                unsigned int ret;                                                       \
+                __asm__ ("or %%g0, ___s_" #__name ", %0" : "=r"(ret));                  \
+                return ret;                                                             \
+        }
+#define BTFIXUPDEF_SIMM13_INIT(__name,__val)                                            \
+        static inline unsigned int ___sf_##__name(void) __attribute_const__;            \
+        extern unsigned ___ss_##__name[2];                                              \
+        static inline unsigned int ___sf_##__name(void) {                               \
+                unsigned int ret;                                                       \
+                __asm__ ("or %%g0, ___s_" #__name "__btset_" #__val ", %0" : "=r"(ret));\
+                return ret;                                                             \
+        }
+
+/* Put either bottom 13 bits, or upper 22 bits into some register variable
+ * (depending on the value, this will lead into sethi FIX, reg; or
+ * mov FIX, reg; )
+ */
+
+#define BTFIXUPDEF_HALF(__name)                                                         \
+        static inline unsigned int ___af_##__name(void) __attribute_const__;            \
+        extern unsigned ___as_##__name[2];                                              \
+        static inline unsigned int ___af_##__name(void) {                               \
+                unsigned int ret;                                                       \
+                __asm__ ("or %%g0, ___a_" #__name ", %0" : "=r"(ret));                  \
+                return ret;                                                             \
+        }
+#define BTFIXUPDEF_HALF_INIT(__name,__val)                                              \
+        static inline unsigned int ___af_##__name(void) __attribute_const__;            \
+        extern unsigned ___as_##__name[2];                                              \
+        static inline unsigned int ___af_##__name(void) {                               \
+                unsigned int ret;                                                       \
+                __asm__ ("or %%g0, ___a_" #__name "__btset_" #__val ", %0" : "=r"(ret));\
+                return ret;                                                             \
+        }
+
+/* Put upper 22 bits into some register variable */
+
+#define BTFIXUPDEF_SETHI(__name)                                                        \
+        static inline unsigned int ___hf_##__name(void) __attribute_const__;            \
+        extern unsigned ___hs_##__name[2];                                              \
+        static inline unsigned int ___hf_##__name(void) {                               \
+                unsigned int ret;                                                       \
+                __asm__ ("sethi %%hi(___h_" #__name "), %0" : "=r"(ret));               \
+                return ret;                                                             \
+        }
+#define BTFIXUPDEF_SETHI_INIT(__name,__val)                                             \
+        static inline unsigned int ___hf_##__name(void) __attribute_const__;            \
+        extern unsigned ___hs_##__name[2];                                              \
+        static inline unsigned int ___hf_##__name(void) {                               \
+                unsigned int ret;                                                       \
+                __asm__ ("sethi %%hi(___h_" #__name "__btset_" #__val "), %0" :         \
+                         "=r"(ret));                                                    \
+                return ret;                                                             \
+        }
+
+/* Put a full 32bit integer into some register variable */
+
+#define BTFIXUPDEF_INT(__name)                                                          \
+        extern unsigned char ___i_##__name;                                             \
+        extern unsigned ___is_##__name[2];
+
+#define BTFIXUPCALL_NORM        0x00000000                      /* Always call */
+#define BTFIXUPCALL_NOP         0x01000000                      /* Possibly optimize to nop */
+#define BTFIXUPCALL_RETINT(i)   (0x90102000|((i) & 0x1fff))     /* Possibly optimize to mov i, %o0 */
+#define BTFIXUPCALL_ORINT(i)    (0x90122000|((i) & 0x1fff))     /* Possibly optimize to or %o0, i, %o0 */
+#define BTFIXUPCALL_RETO0       0x01000000                      /* Return first parameter, actually a nop */
+#define BTFIXUPCALL_ANDNINT(i)  (0x902a2000|((i) & 0x1fff))     /* Possibly optimize to andn %o0, i, %o0 */
+#define BTFIXUPCALL_SWAPO0O1    0xd27a0000                      /* Possibly optimize to swap [%o0],%o1 */
+#define BTFIXUPCALL_SWAPO0G0    0xc07a0000                      /* Possibly optimize to swap [%o0],%g0 */
+#define BTFIXUPCALL_SWAPG1G2    0xc4784000                      /* Possibly optimize to swap [%g1],%g2 */
+#define BTFIXUPCALL_STG0O0      0xc0220000                      /* Possibly optimize to st %g0,[%o0] */
+#define BTFIXUPCALL_STO1O0      0xd2220000                      /* Possibly optimize to st %o1,[%o0] */
+
+#define BTFIXUPSET_CALL(__name, __addr, __insn)                                         \
+        do {                                                                            \
+                ___fs_##__name[0] |= 1;                                                 \
+                ___fs_##__name[1] = (unsigned long)__addr;                              \
+                ___fs_##__name[2] = __insn;                                             \
+        } while (0)
+        
+#define BTFIXUPSET_BLACKBOX(__name, __func)                                             \
+        do {                                                                            \
+                ___bs_##__name[0] |= 1;                                                 \
+                ___bs_##__name[1] = (unsigned long)__func;                              \
+        } while (0)
+        
+#define BTFIXUPCOPY_CALL(__name, __from)                                                \
+        do {                                                                            \
+                ___fs_##__name[0] |= 1;                                                 \
+                ___fs_##__name[1] = ___fs_##__from[1];                                  \
+                ___fs_##__name[2] = ___fs_##__from[2];                                  \
+        } while (0)
+                
+#define BTFIXUPSET_SIMM13(__name, __val)                                                \
+        do {                                                                            \
+                ___ss_##__name[0] |= 1;                                                 \
+                ___ss_##__name[1] = (unsigned)__val;                                    \
+        } while (0)
+        
+#define BTFIXUPCOPY_SIMM13(__name, __from)                                              \
+        do {                                                                            \
+                ___ss_##__name[0] |= 1;                                                 \
+                ___ss_##__name[1] = ___ss_##__from[1];                                  \
+        } while (0)
+                
+#define BTFIXUPSET_HALF(__name, __val)                                                  \
+        do {                                                                            \
+                ___as_##__name[0] |= 1;                                                 \
+                ___as_##__name[1] = (unsigned)__val;                                    \
+        } while (0)
+        
+#define BTFIXUPCOPY_HALF(__name, __from)                                                \
+        do {                                                                            \
+                ___as_##__name[0] |= 1;                                                 \
+                ___as_##__name[1] = ___as_##__from[1];                                  \
+        } while (0)
+                
+#define BTFIXUPSET_SETHI(__name, __val)                                                 \
+        do {                                                                            \
+                ___hs_##__name[0] |= 1;                                                 \
+                ___hs_##__name[1] = (unsigned)__val;                                    \
+        } while (0)
+        
+#define BTFIXUPCOPY_SETHI(__name, __from)                                               \
+        do {                                                                            \
+                ___hs_##__name[0] |= 1;                                                 \
+                ___hs_##__name[1] = ___hs_##__from[1];                                  \
+        } while (0)
+                
+#define BTFIXUPSET_INT(__name, __val)                                                   \
+        do {                                                                            \
+                ___is_##__name[0] |= 1;                                                 \
+                ___is_##__name[1] = (unsigned)__val;                                    \
+        } while (0)
+        
+#define BTFIXUPCOPY_INT(__name, __from)                                                 \
+        do {                                                                            \
+                ___is_##__name[0] |= 1;                                                 \
+                ___is_##__name[1] = ___is_##__from[1];                                  \
+        } while (0)
+        
+#define BTFIXUPVAL_CALL(__name)                                                         \
+        ((unsigned long)___fs_##__name[1])
+        
+extern void btfixup(void);
+
+#else /* __ASSEMBLY__ */
+
+#define BTFIXUP_SETHI(__name)                   %hi(___h_ ## __name)
+#define BTFIXUP_SETHI_INIT(__name,__val)        %hi(___h_ ## __name ## __btset_ ## __val)
+
+#endif /* __ASSEMBLY__ */
+        
+#endif /* !(_SPARC_BTFIXUP_H) */
diff --git a/include/asm-sparc/bug.h b/arch/sparc/include/asm/bug.h
index 8a59e5a8c217..8a59e5a8c217 100644
--- a/include/asm-sparc/bug.h
+++ b/arch/sparc/include/asm/bug.h
diff --git a/arch/sparc/include/asm/bugs.h b/arch/sparc/include/asm/bugs.h
new file mode 100644
index 000000000000..e179bc12f64a
--- /dev/null
+++ b/arch/sparc/include/asm/bugs.h
@@ -0,0 +1,24 @@
+/* include/asm/bugs.h:  Sparc probes for various bugs.
+ *
+ * Copyright (C) 1996, 2007 David S. Miller (davem@davemloft.net)
+ */
+
+#ifdef CONFIG_SPARC32
+#include <asm/cpudata.h>
+#endif
+
+#ifdef CONFIG_SPARC64
+#include <asm/sstate.h>
+#endif
+
+extern unsigned long loops_per_jiffy;
+
+static void __init check_bugs(void)
+{
+#if defined(CONFIG_SPARC32) && !defined(CONFIG_SMP)
+        cpu_data(0).udelay_val = loops_per_jiffy;
+#endif
+#ifdef CONFIG_SPARC64
+        sstate_running();
+#endif
+}
diff --git a/include/asm-sparc/byteorder.h b/arch/sparc/include/asm/byteorder.h
index bcd83aa351c5..bcd83aa351c5 100644
--- a/include/asm-sparc/byteorder.h
+++ b/arch/sparc/include/asm/byteorder.h
diff --git a/include/asm-sparc/cache.h b/arch/sparc/include/asm/cache.h
index 41f85ae4bd4a..41f85ae4bd4a 100644
--- a/include/asm-sparc/cache.h
+++ b/arch/sparc/include/asm/cache.h
diff --git a/arch/sparc/include/asm/cacheflush.h b/arch/sparc/include/asm/cacheflush.h
new file mode 100644
index 000000000000..049168087b19
--- /dev/null
+++ b/arch/sparc/include/asm/cacheflush.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_CACHEFLUSH_H
+#define ___ASM_SPARC_CACHEFLUSH_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/cacheflush_64.h>
+#else
+#include <asm/cacheflush_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/cacheflush_32.h b/arch/sparc/include/asm/cacheflush_32.h
index 68ac10910271..68ac10910271 100644
--- a/include/asm-sparc/cacheflush_32.h
+++ b/arch/sparc/include/asm/cacheflush_32.h
diff --git a/include/asm-sparc/cacheflush_64.h b/arch/sparc/include/asm/cacheflush_64.h
index c43321729b3b..c43321729b3b 100644
--- a/include/asm-sparc/cacheflush_64.h
+++ b/arch/sparc/include/asm/cacheflush_64.h
diff --git a/include/asm-sparc/chafsr.h b/arch/sparc/include/asm/chafsr.h
index 85c69b38220b..85c69b38220b 100644
--- a/include/asm-sparc/chafsr.h
+++ b/arch/sparc/include/asm/chafsr.h
diff --git a/arch/sparc/include/asm/checksum.h b/arch/sparc/include/asm/checksum.h
new file mode 100644
index 000000000000..7ac0d7497bc5
--- /dev/null
+++ b/arch/sparc/include/asm/checksum.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_CHECKSUM_H
+#define ___ASM_SPARC_CHECKSUM_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/checksum_64.h>
+#else
+#include <asm/checksum_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/checksum_32.h b/arch/sparc/include/asm/checksum_32.h
index bdbda1453aa9..bdbda1453aa9 100644
--- a/include/asm-sparc/checksum_32.h
+++ b/arch/sparc/include/asm/checksum_32.h
diff --git a/include/asm-sparc/checksum_64.h b/arch/sparc/include/asm/checksum_64.h
index 019b9615e43c..019b9615e43c 100644
--- a/include/asm-sparc/checksum_64.h
+++ b/arch/sparc/include/asm/checksum_64.h
diff --git a/include/asm-sparc/chmctrl.h b/arch/sparc/include/asm/chmctrl.h
index 859b4a4b0d30..859b4a4b0d30 100644
--- a/include/asm-sparc/chmctrl.h
+++ b/arch/sparc/include/asm/chmctrl.h
diff --git a/include/asm-sparc/clock.h b/arch/sparc/include/asm/clock.h
index 2cf99dadec56..2cf99dadec56 100644
--- a/include/asm-sparc/clock.h
+++ b/arch/sparc/include/asm/clock.h
diff --git a/include/asm-sparc/cmt.h b/arch/sparc/include/asm/cmt.h
index 870db5928577..870db5928577 100644
--- a/include/asm-sparc/cmt.h
+++ b/arch/sparc/include/asm/cmt.h
diff --git a/include/asm-sparc/compat.h b/arch/sparc/include/asm/compat.h
index f260b58f5ce9..f260b58f5ce9 100644
--- a/include/asm-sparc/compat.h
+++ b/arch/sparc/include/asm/compat.h
diff --git a/include/asm-sparc/compat_signal.h b/arch/sparc/include/asm/compat_signal.h
index b759eab9b51c..b759eab9b51c 100644
--- a/include/asm-sparc/compat_signal.h
+++ b/arch/sparc/include/asm/compat_signal.h
diff --git a/include/asm-sparc/contregs.h b/arch/sparc/include/asm/contregs.h
index 48fa8a4ef357..48fa8a4ef357 100644
--- a/include/asm-sparc/contregs.h
+++ b/arch/sparc/include/asm/contregs.h
diff --git a/arch/sparc/include/asm/cpudata.h b/arch/sparc/include/asm/cpudata.h
new file mode 100644
index 000000000000..b5976de7cacd
--- /dev/null
+++ b/arch/sparc/include/asm/cpudata.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_CPUDATA_H
+#define ___ASM_SPARC_CPUDATA_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/cpudata_64.h>
+#else
+#include <asm/cpudata_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/cpudata_32.h b/arch/sparc/include/asm/cpudata_32.h
new file mode 100644
index 000000000000..31d48a0e32c7
--- /dev/null
+++ b/arch/sparc/include/asm/cpudata_32.h
@@ -0,0 +1,27 @@
+/* cpudata.h: Per-cpu parameters.
+ *
+ * Copyright (C) 2004 Keith M Wesolowski (wesolows@foobazco.org)
+ *
+ * Based on include/asm/cpudata.h and Linux 2.4 smp.h
+ * both (C) David S. Miller.
+ */
+
+#ifndef _SPARC_CPUDATA_H
+#define _SPARC_CPUDATA_H
+
+#include <linux/percpu.h>
+
+typedef struct {
+        unsigned long udelay_val;
+        unsigned long clock_tick;
+        unsigned int multiplier;
+        unsigned int counter;
+        int prom_node;
+        int mid;
+        int next;
+} cpuinfo_sparc;
+
+DECLARE_PER_CPU(cpuinfo_sparc, __cpu_data);
+#define cpu_data(__cpu) per_cpu(__cpu_data, (__cpu))
+
+#endif /* _SPARC_CPUDATA_H */
diff --git a/include/asm-sparc/cpudata_64.h b/arch/sparc/include/asm/cpudata_64.h
index 532975ecfe10..532975ecfe10 100644
--- a/include/asm-sparc/cpudata_64.h
+++ b/arch/sparc/include/asm/cpudata_64.h
diff --git a/include/asm-sparc/cputime.h b/arch/sparc/include/asm/cputime.h
index 1a642b81e019..1a642b81e019 100644
--- a/include/asm-sparc/cputime.h
+++ b/arch/sparc/include/asm/cputime.h
diff --git a/arch/sparc/include/asm/current.h b/arch/sparc/include/asm/current.h
new file mode 100644
index 000000000000..10a0df55a574
--- /dev/null
+++ b/arch/sparc/include/asm/current.h
@@ -0,0 +1,34 @@
+/* include/asm/current.h
+ *
+ * Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ * Copyright (C) 2002 Pete Zaitcev (zaitcev@yahoo.com)
+ * Copyright (C) 2007 David S. Miller (davem@davemloft.net)
+ *
+ *  Derived from "include/asm-s390/current.h" by
+ *  Martin Schwidefsky (schwidefsky@de.ibm.com)
+ *  Derived from "include/asm-i386/current.h"
+*/
+#ifndef _SPARC_CURRENT_H
+#define _SPARC_CURRENT_H
+
+#include <linux/thread_info.h>
+
+#ifdef CONFIG_SPARC64
+register struct task_struct *current asm("g4");
+#endif
+
+#ifdef CONFIG_SPARC32
+/* We might want to consider using %g4 like sparc64 to shave a few cycles.
+ *
+ * Two stage process (inline + #define) for type-checking.
+ * We also obfuscate get_current() to check if anyone used that by mistake.
+ */
+struct task_struct;
+static inline struct task_struct *__get_current(void)
+{
+        return current_thread_info()->task;
+}
+#define current __get_current()
+#endif
+
+#endif /* !(_SPARC_CURRENT_H) */
diff --git a/include/asm-sparc/cypress.h b/arch/sparc/include/asm/cypress.h
index 95e9772ea394..95e9772ea394 100644
--- a/include/asm-sparc/cypress.h
+++ b/arch/sparc/include/asm/cypress.h
diff --git a/include/asm-sparc/dcr.h b/arch/sparc/include/asm/dcr.h
index 620c9ba642e9..620c9ba642e9 100644
--- a/include/asm-sparc/dcr.h
+++ b/arch/sparc/include/asm/dcr.h
diff --git a/include/asm-sparc/dcu.h b/arch/sparc/include/asm/dcu.h
index 0f704e106a1b..0f704e106a1b 100644
--- a/include/asm-sparc/dcu.h
+++ b/arch/sparc/include/asm/dcu.h
diff --git a/arch/sparc/include/asm/delay.h b/arch/sparc/include/asm/delay.h
new file mode 100644
index 000000000000..467caa2a97a0
--- /dev/null
+++ b/arch/sparc/include/asm/delay.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_DELAY_H
+#define ___ASM_SPARC_DELAY_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/delay_64.h>
+#else
+#include <asm/delay_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/delay_32.h b/arch/sparc/include/asm/delay_32.h
index bc9aba2bead6..bc9aba2bead6 100644
--- a/include/asm-sparc/delay_32.h
+++ b/arch/sparc/include/asm/delay_32.h
diff --git a/include/asm-sparc/delay_64.h b/arch/sparc/include/asm/delay_64.h
index a77aa622d762..a77aa622d762 100644
--- a/include/asm-sparc/delay_64.h
+++ b/arch/sparc/include/asm/delay_64.h
diff --git a/include/asm-sparc/device.h b/arch/sparc/include/asm/device.h
index 19790eb99cc6..19790eb99cc6 100644
--- a/include/asm-sparc/device.h
+++ b/arch/sparc/include/asm/device.h
diff --git a/include/asm-sparc/display7seg.h b/arch/sparc/include/asm/display7seg.h
index 86d4a901df24..86d4a901df24 100644
--- a/include/asm-sparc/display7seg.h
+++ b/arch/sparc/include/asm/display7seg.h
diff --git a/include/asm-sparc/div64.h b/arch/sparc/include/asm/div64.h
index 6cd978cefb28..6cd978cefb28 100644
--- a/include/asm-sparc/div64.h
+++ b/arch/sparc/include/asm/div64.h
diff --git a/arch/sparc/include/asm/dma-mapping.h b/arch/sparc/include/asm/dma-mapping.h
new file mode 100644
index 000000000000..0f4150e26619
--- /dev/null
+++ b/arch/sparc/include/asm/dma-mapping.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_DMA_MAPPING_H
+#define ___ASM_SPARC_DMA_MAPPING_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/dma-mapping_64.h>
+#else
+#include <asm/dma-mapping_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/dma-mapping_32.h b/arch/sparc/include/asm/dma-mapping_32.h
index f3a641e6b2c8..f3a641e6b2c8 100644
--- a/include/asm-sparc/dma-mapping_32.h
+++ b/arch/sparc/include/asm/dma-mapping_32.h
diff --git a/include/asm-sparc/dma-mapping_64.h b/arch/sparc/include/asm/dma-mapping_64.h
index bfa64f9702d5..bfa64f9702d5 100644
--- a/include/asm-sparc/dma-mapping_64.h
+++ b/arch/sparc/include/asm/dma-mapping_64.h
diff --git a/arch/sparc/include/asm/dma.h b/arch/sparc/include/asm/dma.h
new file mode 100644
index 000000000000..aa1d90ac04c5
--- /dev/null
+++ b/arch/sparc/include/asm/dma.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_DMA_H
+#define ___ASM_SPARC_DMA_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/dma_64.h>
+#else
+#include <asm/dma_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/dma_32.h b/arch/sparc/include/asm/dma_32.h
new file mode 100644
index 000000000000..cf7189c0079b
--- /dev/null
+++ b/arch/sparc/include/asm/dma_32.h
@@ -0,0 +1,288 @@
+/* include/asm/dma.h
+ *
+ * Copyright 1995 (C) David S. Miller (davem@davemloft.net)
+ */
+
+#ifndef _ASM_SPARC_DMA_H
+#define _ASM_SPARC_DMA_H
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+#include <asm/vac-ops.h>  /* for invalidate's, etc. */
+#include <asm/sbus.h>
+#include <asm/delay.h>
+#include <asm/oplib.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <linux/spinlock.h>
+
+struct page;
+extern spinlock_t  dma_spin_lock;
+
+static inline unsigned long claim_dma_lock(void)
+{
+        unsigned long flags;
+        spin_lock_irqsave(&dma_spin_lock, flags);
+        return flags;
+}
+
+static inline void release_dma_lock(unsigned long flags)
+{
+        spin_unlock_irqrestore(&dma_spin_lock, flags);
+}
+
+/* These are irrelevant for Sparc DMA, but we leave it in so that
+ * things can compile.
+ */
+#define MAX_DMA_CHANNELS 8
+#define MAX_DMA_ADDRESS  (~0UL)
+#define DMA_MODE_READ    1
+#define DMA_MODE_WRITE   2
+
+/* Useful constants */
+#define SIZE_16MB      (16*1024*1024)
+#define SIZE_64K       (64*1024)
+
+/* SBUS DMA controller reg offsets */
+#define DMA_CSR         0x00UL          /* rw  DMA control/status register    0x00   */
+#define DMA_ADDR        0x04UL          /* rw  DMA transfer address register  0x04   */
+#define DMA_COUNT       0x08UL          /* rw  DMA transfer count register    0x08   */
+#define DMA_TEST        0x0cUL          /* rw  DMA test/debug register        0x0c   */
+
+/* DVMA chip revisions */
+enum dvma_rev {
+        dvmarev0,
+        dvmaesc1,
+        dvmarev1,
+        dvmarev2,
+        dvmarev3,
+        dvmarevplus,
+        dvmahme
+};
+
+#define DMA_HASCOUNT(rev)  ((rev)==dvmaesc1)
+
+/* Linux DMA information structure, filled during probe. */
+struct sbus_dma {
+        struct sbus_dma *next;
+        struct sbus_dev *sdev;
+        void __iomem *regs;
+
+        /* Status, misc info */
+        int node;                /* Prom node for this DMA device */
+        int running;             /* Are we doing DMA now? */
+        int allocated;           /* Are we "owned" by anyone yet? */
+
+        /* Transfer information. */
+        unsigned long addr;      /* Start address of current transfer */
+        int nbytes;              /* Size of current transfer */
+        int realbytes;           /* For splitting up large transfers, etc. */
+
+        /* DMA revision */
+        enum dvma_rev revision;
+};
+
+extern struct sbus_dma *dma_chain;
+
+/* Broken hardware... */
+#ifdef CONFIG_SUN4
+/* Have to sort this out. Does rev0 work fine on sun4[cmd] without isbroken?
+ * Or is rev0 present only on sun4 boxes? -jj */
+#define DMA_ISBROKEN(dma)    ((dma)->revision == dvmarev0 || (dma)->revision == dvmarev1)
+#else
+#define DMA_ISBROKEN(dma)    ((dma)->revision == dvmarev1)
+#endif
+#define DMA_ISESC1(dma)      ((dma)->revision == dvmaesc1)
+
+/* Main routines in dma.c */
+extern void dvma_init(struct sbus_bus *);
+
+/* Fields in the cond_reg register */
+/* First, the version identification bits */
+#define DMA_DEVICE_ID    0xf0000000        /* Device identification bits */
+#define DMA_VERS0        0x00000000        /* Sunray DMA version */
+#define DMA_ESCV1        0x40000000        /* DMA ESC Version 1 */
+#define DMA_VERS1        0x80000000        /* DMA rev 1 */
+#define DMA_VERS2        0xa0000000        /* DMA rev 2 */
+#define DMA_VERHME       0xb0000000        /* DMA hme gate array */
+#define DMA_VERSPLUS     0x90000000        /* DMA rev 1 PLUS */
+
+#define DMA_HNDL_INTR    0x00000001        /* An IRQ needs to be handled */
+#define DMA_HNDL_ERROR   0x00000002        /* We need to take an error */
+#define DMA_FIFO_ISDRAIN 0x0000000c        /* The DMA FIFO is draining */
+#define DMA_INT_ENAB     0x00000010        /* Turn on interrupts */
+#define DMA_FIFO_INV     0x00000020        /* Invalidate the FIFO */
+#define DMA_ACC_SZ_ERR   0x00000040        /* The access size was bad */
+#define DMA_FIFO_STDRAIN 0x00000040        /* DMA_VERS1 Drain the FIFO */
+#define DMA_RST_SCSI     0x00000080        /* Reset the SCSI controller */
+#define DMA_RST_ENET     DMA_RST_SCSI      /* Reset the ENET controller */
+#define DMA_RST_BPP      DMA_RST_SCSI      /* Reset the BPP controller */
+#define DMA_ST_WRITE     0x00000100        /* write from device to memory */
+#define DMA_ENABLE       0x00000200        /* Fire up DMA, handle requests */
+#define DMA_PEND_READ    0x00000400        /* DMA_VERS1/0/PLUS Pending Read */
+#define DMA_ESC_BURST    0x00000800        /* 1=16byte 0=32byte */
+#define DMA_READ_AHEAD   0x00001800        /* DMA read ahead partial longword */
+#define DMA_DSBL_RD_DRN  0x00001000        /* No EC drain on slave reads */
+#define DMA_BCNT_ENAB    0x00002000        /* If on, use the byte counter */
+#define DMA_TERM_CNTR    0x00004000        /* Terminal counter */
+#define DMA_SCSI_SBUS64  0x00008000        /* HME: Enable 64-bit SBUS mode. */
+#define DMA_CSR_DISAB    0x00010000        /* No FIFO drains during csr */
+#define DMA_SCSI_DISAB   0x00020000        /* No FIFO drains during reg */
+#define DMA_DSBL_WR_INV  0x00020000        /* No EC inval. on slave writes */
+#define DMA_ADD_ENABLE   0x00040000        /* Special ESC DVMA optimization */
+#define DMA_E_BURSTS     0x000c0000        /* ENET: SBUS r/w burst mask */
+#define DMA_E_BURST32    0x00040000        /* ENET: SBUS 32 byte r/w burst */
+#define DMA_E_BURST16    0x00000000        /* ENET: SBUS 16 byte r/w burst */
+#define DMA_BRST_SZ      0x000c0000        /* SCSI: SBUS r/w burst size */
+#define DMA_BRST64       0x00080000        /* SCSI: 64byte bursts (HME on UltraSparc only) */
+#define DMA_BRST32       0x00040000        /* SCSI/BPP: 32byte bursts */
+#define DMA_BRST16       0x00000000        /* SCSI/BPP: 16byte bursts */
+#define DMA_BRST0        0x00080000        /* SCSI: no bursts (non-HME gate arrays) */
+#define DMA_ADDR_DISAB   0x00100000        /* No FIFO drains during addr */
+#define DMA_2CLKS        0x00200000        /* Each transfer = 2 clock ticks */
+#define DMA_3CLKS        0x00400000        /* Each transfer = 3 clock ticks */
+#define DMA_EN_ENETAUI   DMA_3CLKS         /* Put lance into AUI-cable mode */
+#define DMA_CNTR_DISAB   0x00800000        /* No IRQ when DMA_TERM_CNTR set */
+#define DMA_AUTO_NADDR   0x01000000        /* Use "auto nxt addr" feature */
+#define DMA_SCSI_ON      0x02000000        /* Enable SCSI dma */
+#define DMA_BPP_ON       DMA_SCSI_ON       /* Enable BPP dma */
+#define DMA_PARITY_OFF   0x02000000        /* HME: disable parity checking */
+#define DMA_LOADED_ADDR  0x04000000        /* Address has been loaded */
+#define DMA_LOADED_NADDR 0x08000000        /* Next address has been loaded */
+#define DMA_RESET_FAS366 0x08000000        /* HME: Assert RESET to FAS366 */
+
+/* Values describing the burst-size property from the PROM */
+#define DMA_BURST1       0x01
+#define DMA_BURST2       0x02
+#define DMA_BURST4       0x04
+#define DMA_BURST8       0x08
+#define DMA_BURST16      0x10
+#define DMA_BURST32      0x20
+#define DMA_BURST64      0x40
+#define DMA_BURSTBITS    0x7f
+
+/* Determine highest possible final transfer address given a base */
+#define DMA_MAXEND(addr) (0x01000000UL-(((unsigned long)(addr))&0x00ffffffUL))
+
+/* Yes, I hack a lot of elisp in my spare time... */
+#define DMA_ERROR_P(regs)  ((((regs)->cond_reg) & DMA_HNDL_ERROR))
+#define DMA_IRQ_P(regs)    ((((regs)->cond_reg) & (DMA_HNDL_INTR | DMA_HNDL_ERROR)))
+#define DMA_WRITE_P(regs)  ((((regs)->cond_reg) & DMA_ST_WRITE))
+#define DMA_OFF(regs)      ((((regs)->cond_reg) &= (~DMA_ENABLE)))
+#define DMA_INTSOFF(regs)  ((((regs)->cond_reg) &= (~DMA_INT_ENAB)))
+#define DMA_INTSON(regs)   ((((regs)->cond_reg) |= (DMA_INT_ENAB)))
+#define DMA_PUNTFIFO(regs) ((((regs)->cond_reg) |= DMA_FIFO_INV))
+#define DMA_SETSTART(regs, addr)  ((((regs)->st_addr) = (char *) addr))
+#define DMA_BEGINDMA_W(regs) \
+        ((((regs)->cond_reg |= (DMA_ST_WRITE|DMA_ENABLE|DMA_INT_ENAB))))
+#define DMA_BEGINDMA_R(regs) \
+        ((((regs)->cond_reg |= ((DMA_ENABLE|DMA_INT_ENAB)&(~DMA_ST_WRITE)))))
+
+/* For certain DMA chips, we need to disable ints upon irq entry
+ * and turn them back on when we are done.  So in any ESP interrupt
+ * handler you *must* call DMA_IRQ_ENTRY upon entry and DMA_IRQ_EXIT
+ * when leaving the handler.  You have been warned...
+ */
+#define DMA_IRQ_ENTRY(dma, dregs) do { \
+        if(DMA_ISBROKEN(dma)) DMA_INTSOFF(dregs); \
+   } while (0)
+
+#define DMA_IRQ_EXIT(dma, dregs) do { \
+        if(DMA_ISBROKEN(dma)) DMA_INTSON(dregs); \
+   } while(0)
+
+#if 0   /* P3 this stuff is inline in ledma.c:init_restart_ledma() */
+/* Pause until counter runs out or BIT isn't set in the DMA condition
+ * register.
+ */
+static inline void sparc_dma_pause(struct sparc_dma_registers *regs,
+                                       unsigned long bit)
+{
+        int ctr = 50000;   /* Let's find some bugs ;) */
+
+        /* Busy wait until the bit is not set any more */
+        while((regs->cond_reg&bit) && (ctr>0)) {
+                ctr--;
+                __delay(5);
+        }
+
+        /* Check for bogus outcome. */
+        if(!ctr)
+                panic("DMA timeout");
+}
+
+/* Reset the friggin' thing... */
+#define DMA_RESET(dma) do { \
+        struct sparc_dma_registers *regs = dma->regs;                      \
+        /* Let the current FIFO drain itself */                            \
+        sparc_dma_pause(regs, (DMA_FIFO_ISDRAIN));                         \
+        /* Reset the logic */                                              \
+        regs->cond_reg |= (DMA_RST_SCSI);     /* assert */                 \
+        __delay(400);                         /* let the bits set ;) */    \
+        regs->cond_reg &= ~(DMA_RST_SCSI);    /* de-assert */              \
+        sparc_dma_enable_interrupts(regs);    /* Re-enable interrupts */   \
+        /* Enable FAST transfers if available */                           \
+        if(dma->revision>dvmarev1) regs->cond_reg |= DMA_3CLKS;            \
+        dma->running = 0;                                                  \
+} while(0)
+#endif
+
+#define for_each_dvma(dma) \
+        for((dma) = dma_chain; (dma); (dma) = (dma)->next)
+
+extern int get_dma_list(char *);
+extern int request_dma(unsigned int, __const__ char *);
+extern void free_dma(unsigned int);
+
+/* From PCI */
+
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy    (0)
+#endif
+
+/* Routines for data transfer buffers. */
+BTFIXUPDEF_CALL(char *, mmu_lockarea, char *, unsigned long)
+BTFIXUPDEF_CALL(void,   mmu_unlockarea, char *, unsigned long)
+
+#define mmu_lockarea(vaddr,len) BTFIXUP_CALL(mmu_lockarea)(vaddr,len)
+#define mmu_unlockarea(vaddr,len) BTFIXUP_CALL(mmu_unlockarea)(vaddr,len)
+
+/* These are implementations for sbus_map_sg/sbus_unmap_sg... collapse later */
+BTFIXUPDEF_CALL(__u32, mmu_get_scsi_one, char *, unsigned long, struct sbus_bus *sbus)
+BTFIXUPDEF_CALL(void,  mmu_get_scsi_sgl, struct scatterlist *, int, struct sbus_bus *sbus)
+BTFIXUPDEF_CALL(void,  mmu_release_scsi_one, __u32, unsigned long, struct sbus_bus *sbus)
+BTFIXUPDEF_CALL(void,  mmu_release_scsi_sgl, struct scatterlist *, int, struct sbus_bus *sbus)
+
+#define mmu_get_scsi_one(vaddr,len,sbus) BTFIXUP_CALL(mmu_get_scsi_one)(vaddr,len,sbus)
+#define mmu_get_scsi_sgl(sg,sz,sbus) BTFIXUP_CALL(mmu_get_scsi_sgl)(sg,sz,sbus)
+#define mmu_release_scsi_one(vaddr,len,sbus) BTFIXUP_CALL(mmu_release_scsi_one)(vaddr,len,sbus)
+#define mmu_release_scsi_sgl(sg,sz,sbus) BTFIXUP_CALL(mmu_release_scsi_sgl)(sg,sz,sbus)
+
+/*
+ * mmu_map/unmap are provided by iommu/iounit; Invalid to call on IIep.
+ *
+ * The mmu_map_dma_area establishes two mappings in one go.
+ * These mappings point to pages normally mapped at 'va' (linear address).
+ * First mapping is for CPU visible address at 'a', uncached.
+ * This is an alias, but it works because it is an uncached mapping.
+ * Second mapping is for device visible address, or "bus" address.
+ * The bus address is returned at '*pba'.
+ *
+ * These functions seem distinct, but are hard to split. On sun4c,
+ * at least for now, 'a' is equal to bus address, and retured in *pba.
+ * On sun4m, page attributes depend on the CPU type, so we have to
+ * know if we are mapping RAM or I/O, so it has to be an additional argument
+ * to a separate mapping function for CPU visible mappings.
+ */
+BTFIXUPDEF_CALL(int,  mmu_map_dma_area, dma_addr_t *, unsigned long, unsigned long, int len)
+BTFIXUPDEF_CALL(struct page *, mmu_translate_dvma, unsigned long busa)
+BTFIXUPDEF_CALL(void,  mmu_unmap_dma_area, unsigned long busa, int len)
+
+#define mmu_map_dma_area(pba,va,a,len) BTFIXUP_CALL(mmu_map_dma_area)(pba,va,a,len)
+#define mmu_unmap_dma_area(ba,len) BTFIXUP_CALL(mmu_unmap_dma_area)(ba,len)
+#define mmu_translate_dvma(ba)     BTFIXUP_CALL(mmu_translate_dvma)(ba)
+
+#endif /* !(_ASM_SPARC_DMA_H) */
diff --git a/arch/sparc/include/asm/dma_64.h b/arch/sparc/include/asm/dma_64.h
new file mode 100644
index 000000000000..46a8aecffc02
--- /dev/null
+++ b/arch/sparc/include/asm/dma_64.h
@@ -0,0 +1,205 @@
+/*
+ * include/asm/dma.h
+ *
+ * Copyright 1996 (C) David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _ASM_SPARC64_DMA_H
+#define _ASM_SPARC64_DMA_H
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/spinlock.h>
+
+#include <asm/sbus.h>
+#include <asm/delay.h>
+#include <asm/oplib.h>
+
+/* These are irrelevant for Sparc DMA, but we leave it in so that
+ * things can compile.
+ */
+#define MAX_DMA_CHANNELS 8
+#define DMA_MODE_READ    1
+#define DMA_MODE_WRITE   2
+#define MAX_DMA_ADDRESS  (~0UL)
+
+/* Useful constants */
+#define SIZE_16MB      (16*1024*1024)
+#define SIZE_64K       (64*1024)
+
+/* SBUS DMA controller reg offsets */
+#define DMA_CSR         0x00UL          /* rw  DMA control/status register    0x00   */
+#define DMA_ADDR        0x04UL          /* rw  DMA transfer address register  0x04   */
+#define DMA_COUNT       0x08UL          /* rw  DMA transfer count register    0x08   */
+#define DMA_TEST        0x0cUL          /* rw  DMA test/debug register        0x0c   */
+
+/* DVMA chip revisions */
+enum dvma_rev {
+        dvmarev0,
+        dvmaesc1,
+        dvmarev1,
+        dvmarev2,
+        dvmarev3,
+        dvmarevplus,
+        dvmahme
+};
+
+#define DMA_HASCOUNT(rev)  ((rev)==dvmaesc1)
+
+/* Linux DMA information structure, filled during probe. */
+struct sbus_dma {
+        struct sbus_dma *next;
+        struct sbus_dev *sdev;
+        void __iomem *regs;
+
+        /* Status, misc info */
+        int node;                /* Prom node for this DMA device */
+        int running;             /* Are we doing DMA now? */
+        int allocated;           /* Are we "owned" by anyone yet? */
+
+        /* Transfer information. */
+        u32 addr;                /* Start address of current transfer */
+        int nbytes;              /* Size of current transfer */
+        int realbytes;           /* For splitting up large transfers, etc. */
+
+        /* DMA revision */
+        enum dvma_rev revision;
+};
+
+extern struct sbus_dma *dma_chain;
+
+/* Broken hardware... */
+#define DMA_ISBROKEN(dma)    ((dma)->revision == dvmarev1)
+#define DMA_ISESC1(dma)      ((dma)->revision == dvmaesc1)
+
+/* Main routines in dma.c */
+extern void dvma_init(struct sbus_bus *);
+
+/* Fields in the cond_reg register */
+/* First, the version identification bits */
+#define DMA_DEVICE_ID    0xf0000000        /* Device identification bits */
+#define DMA_VERS0        0x00000000        /* Sunray DMA version */
+#define DMA_ESCV1        0x40000000        /* DMA ESC Version 1 */
+#define DMA_VERS1        0x80000000        /* DMA rev 1 */
+#define DMA_VERS2        0xa0000000        /* DMA rev 2 */
+#define DMA_VERHME       0xb0000000        /* DMA hme gate array */
+#define DMA_VERSPLUS     0x90000000        /* DMA rev 1 PLUS */
+
+#define DMA_HNDL_INTR    0x00000001        /* An IRQ needs to be handled */
+#define DMA_HNDL_ERROR   0x00000002        /* We need to take an error */
+#define DMA_FIFO_ISDRAIN 0x0000000c        /* The DMA FIFO is draining */
+#define DMA_INT_ENAB     0x00000010        /* Turn on interrupts */
+#define DMA_FIFO_INV     0x00000020        /* Invalidate the FIFO */
+#define DMA_ACC_SZ_ERR   0x00000040        /* The access size was bad */
+#define DMA_FIFO_STDRAIN 0x00000040        /* DMA_VERS1 Drain the FIFO */
+#define DMA_RST_SCSI     0x00000080        /* Reset the SCSI controller */
+#define DMA_RST_ENET     DMA_RST_SCSI      /* Reset the ENET controller */
+#define DMA_ST_WRITE     0x00000100        /* write from device to memory */
+#define DMA_ENABLE       0x00000200        /* Fire up DMA, handle requests */
+#define DMA_PEND_READ    0x00000400        /* DMA_VERS1/0/PLUS Pending Read */
+#define DMA_ESC_BURST    0x00000800        /* 1=16byte 0=32byte */
+#define DMA_READ_AHEAD   0x00001800        /* DMA read ahead partial longword */
+#define DMA_DSBL_RD_DRN  0x00001000        /* No EC drain on slave reads */
+#define DMA_BCNT_ENAB    0x00002000        /* If on, use the byte counter */
+#define DMA_TERM_CNTR    0x00004000        /* Terminal counter */
+#define DMA_SCSI_SBUS64  0x00008000        /* HME: Enable 64-bit SBUS mode. */
+#define DMA_CSR_DISAB    0x00010000        /* No FIFO drains during csr */
+#define DMA_SCSI_DISAB   0x00020000        /* No FIFO drains during reg */
+#define DMA_DSBL_WR_INV  0x00020000        /* No EC inval. on slave writes */
+#define DMA_ADD_ENABLE   0x00040000        /* Special ESC DVMA optimization */
+#define DMA_E_BURSTS     0x000c0000        /* ENET: SBUS r/w burst mask */
+#define DMA_E_BURST32    0x00040000        /* ENET: SBUS 32 byte r/w burst */
+#define DMA_E_BURST16    0x00000000        /* ENET: SBUS 16 byte r/w burst */
+#define DMA_BRST_SZ      0x000c0000        /* SCSI: SBUS r/w burst size */
+#define DMA_BRST64       0x000c0000        /* SCSI: 64byte bursts (HME on UltraSparc only) */
+#define DMA_BRST32       0x00040000        /* SCSI: 32byte bursts */
+#define DMA_BRST16       0x00000000        /* SCSI: 16byte bursts */
+#define DMA_BRST0        0x00080000        /* SCSI: no bursts (non-HME gate arrays) */
+#define DMA_ADDR_DISAB   0x00100000        /* No FIFO drains during addr */
+#define DMA_2CLKS        0x00200000        /* Each transfer = 2 clock ticks */
+#define DMA_3CLKS        0x00400000        /* Each transfer = 3 clock ticks */
+#define DMA_EN_ENETAUI   DMA_3CLKS         /* Put lance into AUI-cable mode */
+#define DMA_CNTR_DISAB   0x00800000        /* No IRQ when DMA_TERM_CNTR set */
+#define DMA_AUTO_NADDR   0x01000000        /* Use "auto nxt addr" feature */
+#define DMA_SCSI_ON      0x02000000        /* Enable SCSI dma */
+#define DMA_PARITY_OFF   0x02000000        /* HME: disable parity checking */
+#define DMA_LOADED_ADDR  0x04000000        /* Address has been loaded */
+#define DMA_LOADED_NADDR 0x08000000        /* Next address has been loaded */
+#define DMA_RESET_FAS366 0x08000000        /* HME: Assert RESET to FAS366 */
+
+/* Values describing the burst-size property from the PROM */
+#define DMA_BURST1       0x01
+#define DMA_BURST2       0x02
+#define DMA_BURST4       0x04
+#define DMA_BURST8       0x08
+#define DMA_BURST16      0x10
+#define DMA_BURST32      0x20
+#define DMA_BURST64      0x40
+#define DMA_BURSTBITS    0x7f
+
+/* Determine highest possible final transfer address given a base */
+#define DMA_MAXEND(addr) (0x01000000UL-(((unsigned long)(addr))&0x00ffffffUL))
+
+/* Yes, I hack a lot of elisp in my spare time... */
+#define DMA_ERROR_P(regs)  ((sbus_readl((regs) + DMA_CSR) & DMA_HNDL_ERROR))
+#define DMA_IRQ_P(regs)    ((sbus_readl((regs) + DMA_CSR)) & (DMA_HNDL_INTR | DMA_HNDL_ERROR))
+#define DMA_WRITE_P(regs)  ((sbus_readl((regs) + DMA_CSR) & DMA_ST_WRITE))
+#define DMA_OFF(__regs)         \
+do {    u32 tmp = sbus_readl((__regs) + DMA_CSR); \
+        tmp &= ~DMA_ENABLE; \
+        sbus_writel(tmp, (__regs) + DMA_CSR); \
+} while(0)
+#define DMA_INTSOFF(__regs)     \
+do {    u32 tmp = sbus_readl((__regs) + DMA_CSR); \
+        tmp &= ~DMA_INT_ENAB; \
+        sbus_writel(tmp, (__regs) + DMA_CSR); \
+} while(0)
+#define DMA_INTSON(__regs)      \
+do {    u32 tmp = sbus_readl((__regs) + DMA_CSR); \
+        tmp |= DMA_INT_ENAB; \
+        sbus_writel(tmp, (__regs) + DMA_CSR); \
+} while(0)
+#define DMA_PUNTFIFO(__regs)    \
+do {    u32 tmp = sbus_readl((__regs) + DMA_CSR); \
+        tmp |= DMA_FIFO_INV; \
+        sbus_writel(tmp, (__regs) + DMA_CSR); \
+} while(0)
+#define DMA_SETSTART(__regs, __addr)    \
+        sbus_writel((u32)(__addr), (__regs) + DMA_ADDR);
+#define DMA_BEGINDMA_W(__regs)  \
+do {    u32 tmp = sbus_readl((__regs) + DMA_CSR); \
+        tmp |= (DMA_ST_WRITE|DMA_ENABLE|DMA_INT_ENAB); \
+        sbus_writel(tmp, (__regs) + DMA_CSR); \
+} while(0)
+#define DMA_BEGINDMA_R(__regs)  \
+do {    u32 tmp = sbus_readl((__regs) + DMA_CSR); \
+        tmp |= (DMA_ENABLE|DMA_INT_ENAB); \
+        tmp &= ~DMA_ST_WRITE; \
+        sbus_writel(tmp, (__regs) + DMA_CSR); \
+} while(0)
+
+/* For certain DMA chips, we need to disable ints upon irq entry
+ * and turn them back on when we are done.  So in any ESP interrupt
+ * handler you *must* call DMA_IRQ_ENTRY upon entry and DMA_IRQ_EXIT
+ * when leaving the handler.  You have been warned...
+ */
+#define DMA_IRQ_ENTRY(dma, dregs) do { \
+        if(DMA_ISBROKEN(dma)) DMA_INTSOFF(dregs); \
+   } while (0)
+
+#define DMA_IRQ_EXIT(dma, dregs) do { \
+        if(DMA_ISBROKEN(dma)) DMA_INTSON(dregs); \
+   } while(0)
+
+#define for_each_dvma(dma) \
+        for((dma) = dma_chain; (dma); (dma) = (dma)->next)
+
+/* From PCI */
+
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy    (0)
+#endif
+
+#endif /* !(_ASM_SPARC64_DMA_H) */
diff --git a/arch/sparc/include/asm/ebus.h b/arch/sparc/include/asm/ebus.h
new file mode 100644
index 000000000000..83a6d16c22e6
--- /dev/null
+++ b/arch/sparc/include/asm/ebus.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_EBUS_H
+#define ___ASM_SPARC_EBUS_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/ebus_64.h>
+#else
+#include <asm/ebus_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/ebus_32.h b/arch/sparc/include/asm/ebus_32.h
index 29cb7dfc6b79..29cb7dfc6b79 100644
--- a/include/asm-sparc/ebus_32.h
+++ b/arch/sparc/include/asm/ebus_32.h
diff --git a/include/asm-sparc/ebus_64.h b/arch/sparc/include/asm/ebus_64.h
index fcc62b97ced5..fcc62b97ced5 100644
--- a/include/asm-sparc/ebus_64.h
+++ b/arch/sparc/include/asm/ebus_64.h
diff --git a/include/asm-sparc/ecc.h b/arch/sparc/include/asm/ecc.h
index ccb84b66fef1..ccb84b66fef1 100644
--- a/include/asm-sparc/ecc.h
+++ b/arch/sparc/include/asm/ecc.h
diff --git a/include/asm-sparc/eeprom.h b/arch/sparc/include/asm/eeprom.h
index e17beeceb405..e17beeceb405 100644
--- a/include/asm-sparc/eeprom.h
+++ b/arch/sparc/include/asm/eeprom.h
diff --git a/arch/sparc/include/asm/elf.h b/arch/sparc/include/asm/elf.h
new file mode 100644
index 000000000000..0a2816c50b07
--- /dev/null
+++ b/arch/sparc/include/asm/elf.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_ELF_H
+#define ___ASM_SPARC_ELF_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/elf_64.h>
+#else
+#include <asm/elf_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/elf_32.h b/arch/sparc/include/asm/elf_32.h
index d043f80bc2fd..d043f80bc2fd 100644
--- a/include/asm-sparc/elf_32.h
+++ b/arch/sparc/include/asm/elf_32.h
diff --git a/include/asm-sparc/elf_64.h b/arch/sparc/include/asm/elf_64.h
index 0818a1308f4e..0818a1308f4e 100644
--- a/include/asm-sparc/elf_64.h
+++ b/arch/sparc/include/asm/elf_64.h
diff --git a/include/asm-sparc/emergency-restart.h b/arch/sparc/include/asm/emergency-restart.h
index 108d8c48e42e..108d8c48e42e 100644
--- a/include/asm-sparc/emergency-restart.h
+++ b/arch/sparc/include/asm/emergency-restart.h
diff --git a/include/asm-sparc/envctrl.h b/arch/sparc/include/asm/envctrl.h
index 624fa7e2da8e..624fa7e2da8e 100644
--- a/include/asm-sparc/envctrl.h
+++ b/arch/sparc/include/asm/envctrl.h
diff --git a/include/asm-sparc/errno.h b/arch/sparc/include/asm/errno.h
index a9ef172977de..a9ef172977de 100644
--- a/include/asm-sparc/errno.h
+++ b/arch/sparc/include/asm/errno.h
diff --git a/include/asm-sparc/estate.h b/arch/sparc/include/asm/estate.h
index 520c08560d1b..520c08560d1b 100644
--- a/include/asm-sparc/estate.h
+++ b/arch/sparc/include/asm/estate.h
diff --git a/include/asm-sparc/fb.h b/arch/sparc/include/asm/fb.h
index b83e44729655..b83e44729655 100644
--- a/include/asm-sparc/fb.h
+++ b/arch/sparc/include/asm/fb.h
diff --git a/include/asm-sparc/fbio.h b/arch/sparc/include/asm/fbio.h
index b9215a0907d3..b9215a0907d3 100644
--- a/include/asm-sparc/fbio.h
+++ b/arch/sparc/include/asm/fbio.h
diff --git a/include/asm-sparc/fcntl.h b/arch/sparc/include/asm/fcntl.h
index d4d9c9d852c3..d4d9c9d852c3 100644
--- a/include/asm-sparc/fcntl.h
+++ b/arch/sparc/include/asm/fcntl.h
diff --git a/include/asm-sparc/fhc.h b/arch/sparc/include/asm/fhc.h
index 788cbc46a116..788cbc46a116 100644
--- a/include/asm-sparc/fhc.h
+++ b/arch/sparc/include/asm/fhc.h
diff --git a/include/asm-sparc/fixmap.h b/arch/sparc/include/asm/fixmap.h
index f18fc0755adf..f18fc0755adf 100644
--- a/include/asm-sparc/fixmap.h
+++ b/arch/sparc/include/asm/fixmap.h
diff --git a/arch/sparc/include/asm/floppy.h b/arch/sparc/include/asm/floppy.h
new file mode 100644
index 000000000000..faebd335b600
--- /dev/null
+++ b/arch/sparc/include/asm/floppy.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_FLOPPY_H
+#define ___ASM_SPARC_FLOPPY_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/floppy_64.h>
+#else
+#include <asm/floppy_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/floppy_32.h b/arch/sparc/include/asm/floppy_32.h
new file mode 100644
index 000000000000..ae3f00bf22ff
--- /dev/null
+++ b/arch/sparc/include/asm/floppy_32.h
@@ -0,0 +1,388 @@
+/* asm/floppy.h: Sparc specific parts of the Floppy driver.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@davemloft.net)
+ */
+
+#ifndef __ASM_SPARC_FLOPPY_H
+#define __ASM_SPARC_FLOPPY_H
+
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/system.h>
+#include <asm/idprom.h>
+#include <asm/machines.h>
+#include <asm/oplib.h>
+#include <asm/auxio.h>
+#include <asm/irq.h>
+
+/* We don't need no stinkin' I/O port allocation crap. */
+#undef release_region
+#undef request_region
+#define release_region(X, Y)    do { } while(0)
+#define request_region(X, Y, Z) (1)
+
+/* References:
+ * 1) Netbsd Sun floppy driver.
+ * 2) NCR 82077 controller manual
+ * 3) Intel 82077 controller manual
+ */
+struct sun_flpy_controller {
+        volatile unsigned char status_82072;  /* Main Status reg. */
+#define dcr_82072              status_82072   /* Digital Control reg. */
+#define status1_82077          status_82072   /* Auxiliary Status reg. 1 */
+
+        volatile unsigned char data_82072;    /* Data fifo. */
+#define status2_82077          data_82072     /* Auxiliary Status reg. 2 */
+
+        volatile unsigned char dor_82077;     /* Digital Output reg. */
+        volatile unsigned char tapectl_82077; /* What the? Tape control reg? */
+
+        volatile unsigned char status_82077;  /* Main Status Register. */
+#define drs_82077              status_82077   /* Digital Rate Select reg. */
+
+        volatile unsigned char data_82077;    /* Data fifo. */
+        volatile unsigned char ___unused;
+        volatile unsigned char dir_82077;     /* Digital Input reg. */
+#define dcr_82077              dir_82077      /* Config Control reg. */
+};
+
+/* You'll only ever find one controller on a SparcStation anyways. */
+static struct sun_flpy_controller *sun_fdc = NULL;
+extern volatile unsigned char *fdc_status;
+
+struct sun_floppy_ops {
+        unsigned char (*fd_inb)(int port);
+        void (*fd_outb)(unsigned char value, int port);
+};
+
+static struct sun_floppy_ops sun_fdops;
+
+#define fd_inb(port)              sun_fdops.fd_inb(port)
+#define fd_outb(value,port)       sun_fdops.fd_outb(value,port)
+#define fd_enable_dma()           sun_fd_enable_dma()
+#define fd_disable_dma()          sun_fd_disable_dma()
+#define fd_request_dma()          (0) /* nothing... */
+#define fd_free_dma()             /* nothing... */
+#define fd_clear_dma_ff()         /* nothing... */
+#define fd_set_dma_mode(mode)     sun_fd_set_dma_mode(mode)
+#define fd_set_dma_addr(addr)     sun_fd_set_dma_addr(addr)
+#define fd_set_dma_count(count)   sun_fd_set_dma_count(count)
+#define fd_enable_irq()           /* nothing... */
+#define fd_disable_irq()          /* nothing... */
+#define fd_cacheflush(addr, size) /* nothing... */
+#define fd_request_irq()          sun_fd_request_irq()
+#define fd_free_irq()             /* nothing... */
+#if 0  /* P3: added by Alain, these cause a MMU corruption. 19960524 XXX */
+#define fd_dma_mem_alloc(size)    ((unsigned long) vmalloc(size))
+#define fd_dma_mem_free(addr,size) (vfree((void *)(addr)))
+#endif
+
+/* XXX This isn't really correct. XXX */
+#define get_dma_residue(x)        (0)
+
+#define FLOPPY0_TYPE  4
+#define FLOPPY1_TYPE  0
+
+/* Super paranoid... */
+#undef HAVE_DISABLE_HLT
+
+/* Here is where we catch the floppy driver trying to initialize,
+ * therefore this is where we call the PROM device tree probing
+ * routine etc. on the Sparc.
+ */
+#define FDC1                      sun_floppy_init()
+
+#define N_FDC    1
+#define N_DRIVE  8
+
+/* No 64k boundary crossing problems on the Sparc. */
+#define CROSS_64KB(a,s) (0)
+
+/* Routines unique to each controller type on a Sun. */
+static void sun_set_dor(unsigned char value, int fdc_82077)
+{
+        if (sparc_cpu_model == sun4c) {
+                unsigned int bits = 0;
+                if (value & 0x10)
+                        bits |= AUXIO_FLPY_DSEL;
+                if ((value & 0x80) == 0)
+                        bits |= AUXIO_FLPY_EJCT;
+                set_auxio(bits, (~bits) & (AUXIO_FLPY_DSEL|AUXIO_FLPY_EJCT));
+        }
+        if (fdc_82077) {
+                sun_fdc->dor_82077 = value;
+        }
+}
+
+static unsigned char sun_read_dir(void)
+{
+        if (sparc_cpu_model == sun4c)
+                return (get_auxio() & AUXIO_FLPY_DCHG) ? 0x80 : 0;
+        else
+                return sun_fdc->dir_82077;
+}
+
+static unsigned char sun_82072_fd_inb(int port)
+{
+        udelay(5);
+        switch(port & 7) {
+        default:
+                printk("floppy: Asked to read unknown port %d\n", port);
+                panic("floppy: Port bolixed.");
+        case 4: /* FD_STATUS */
+                return sun_fdc->status_82072 & ~STATUS_DMA;
+        case 5: /* FD_DATA */
+                return sun_fdc->data_82072;
+        case 7: /* FD_DIR */
+                return sun_read_dir();
+        };
+        panic("sun_82072_fd_inb: How did I get here?");
+}
+
+static void sun_82072_fd_outb(unsigned char value, int port)
+{
+        udelay(5);
+        switch(port & 7) {
+        default:
+                printk("floppy: Asked to write to unknown port %d\n", port);
+                panic("floppy: Port bolixed.");
+        case 2: /* FD_DOR */
+                sun_set_dor(value, 0);
+                break;
+        case 5: /* FD_DATA */
+                sun_fdc->data_82072 = value;
+                break;
+        case 7: /* FD_DCR */
+                sun_fdc->dcr_82072 = value;
+                break;
+        case 4: /* FD_STATUS */
+                sun_fdc->status_82072 = value;
+                break;
+        };
+        return;
+}
+
+static unsigned char sun_82077_fd_inb(int port)
+{
+        udelay(5);
+        switch(port & 7) {
+        default:
+                printk("floppy: Asked to read unknown port %d\n", port);
+                panic("floppy: Port bolixed.");
+        case 0: /* FD_STATUS_0 */
+                return sun_fdc->status1_82077;
+        case 1: /* FD_STATUS_1 */
+                return sun_fdc->status2_82077;
+        case 2: /* FD_DOR */
+                return sun_fdc->dor_82077;
+        case 3: /* FD_TDR */
+                return sun_fdc->tapectl_82077;
+        case 4: /* FD_STATUS */
+                return sun_fdc->status_82077 & ~STATUS_DMA;
+        case 5: /* FD_DATA */
+                return sun_fdc->data_82077;
+        case 7: /* FD_DIR */
+                return sun_read_dir();
+        };
+        panic("sun_82077_fd_inb: How did I get here?");
+}
+
+static void sun_82077_fd_outb(unsigned char value, int port)
+{
+        udelay(5);
+        switch(port & 7) {
+        default:
+                printk("floppy: Asked to write to unknown port %d\n", port);
+                panic("floppy: Port bolixed.");
+        case 2: /* FD_DOR */
+                sun_set_dor(value, 1);
+                break;
+        case 5: /* FD_DATA */
+                sun_fdc->data_82077 = value;
+                break;
+        case 7: /* FD_DCR */
+                sun_fdc->dcr_82077 = value;
+                break;
+        case 4: /* FD_STATUS */
+                sun_fdc->status_82077 = value;
+                break;
+        case 3: /* FD_TDR */
+                sun_fdc->tapectl_82077 = value;
+                break;
+        };
+        return;
+}
+
+/* For pseudo-dma (Sun floppy drives have no real DMA available to
+ * them so we must eat the data fifo bytes directly ourselves) we have
+ * three state variables.  doing_pdma tells our inline low-level
+ * assembly floppy interrupt entry point whether it should sit and eat
+ * bytes from the fifo or just transfer control up to the higher level
+ * floppy interrupt c-code.  I tried very hard but I could not get the
+ * pseudo-dma to work in c-code without getting many overruns and
+ * underruns.  If non-zero, doing_pdma encodes the direction of
+ * the transfer for debugging.  1=read 2=write
+ */
+extern char *pdma_vaddr;
+extern unsigned long pdma_size;
+extern volatile int doing_pdma;
+
+/* This is software state */
+extern char *pdma_base;
+extern unsigned long pdma_areasize;
+
+/* Common routines to all controller types on the Sparc. */
+static inline void virtual_dma_init(void)
+{
+        /* nothing... */
+}
+
+static inline void sun_fd_disable_dma(void)
+{
+        doing_pdma = 0;
+        if (pdma_base) {
+                mmu_unlockarea(pdma_base, pdma_areasize);
+                pdma_base = NULL;
+        }
+}
+
+static inline void sun_fd_set_dma_mode(int mode)
+{
+        switch(mode) {
+        case DMA_MODE_READ:
+                doing_pdma = 1;
+                break;
+        case DMA_MODE_WRITE:
+                doing_pdma = 2;
+                break;
+        default:
+                printk("Unknown dma mode %d\n", mode);
+                panic("floppy: Giving up...");
+        }
+}
+
+static inline void sun_fd_set_dma_addr(char *buffer)
+{
+        pdma_vaddr = buffer;
+}
+
+static inline void sun_fd_set_dma_count(int length)
+{
+        pdma_size = length;
+}
+
+static inline void sun_fd_enable_dma(void)
+{
+        pdma_vaddr = mmu_lockarea(pdma_vaddr, pdma_size);
+        pdma_base = pdma_vaddr;
+        pdma_areasize = pdma_size;
+}
+
+/* Our low-level entry point in arch/sparc/kernel/entry.S */
+extern int sparc_floppy_request_irq(int irq, unsigned long flags,
+                                    irq_handler_t irq_handler);
+
+static int sun_fd_request_irq(void)
+{
+        static int once = 0;
+        int error;
+
+        if(!once) {
+                once = 1;
+                error = sparc_floppy_request_irq(FLOPPY_IRQ,
+                                                 IRQF_DISABLED,
+                                                 floppy_interrupt);
+                return ((error == 0) ? 0 : -1);
+        } else return 0;
+}
+
+static struct linux_prom_registers fd_regs[2];
+
+static int sun_floppy_init(void)
+{
+        char state[128];
+        int tnode, fd_node, num_regs;
+        struct resource r;
+
+        use_virtual_dma = 1;
+
+        FLOPPY_IRQ = 11;
+        /* Forget it if we aren't on a machine that could possibly
+         * ever have a floppy drive.
+         */
+        if((sparc_cpu_model != sun4c && sparc_cpu_model != sun4m) ||
+           ((idprom->id_machtype == (SM_SUN4C | SM_4C_SLC)) ||
+            (idprom->id_machtype == (SM_SUN4C | SM_4C_ELC)))) {
+                /* We certainly don't have a floppy controller. */
+                goto no_sun_fdc;
+        }
+        /* Well, try to find one. */
+        tnode = prom_getchild(prom_root_node);
+        fd_node = prom_searchsiblings(tnode, "obio");
+        if(fd_node != 0) {
+                tnode = prom_getchild(fd_node);
+                fd_node = prom_searchsiblings(tnode, "SUNW,fdtwo");
+        } else {
+                fd_node = prom_searchsiblings(tnode, "fd");
+        }
+        if(fd_node == 0) {
+                goto no_sun_fdc;
+        }
+
+        /* The sun4m lets us know if the controller is actually usable. */
+        if(sparc_cpu_model == sun4m &&
+           prom_getproperty(fd_node, "status", state, sizeof(state)) != -1) {
+                if(!strcmp(state, "disabled")) {
+                        goto no_sun_fdc;
+                }
+        }
+        num_regs = prom_getproperty(fd_node, "reg", (char *) fd_regs, sizeof(fd_regs));
+        num_regs = (num_regs / sizeof(fd_regs[0]));
+        prom_apply_obio_ranges(fd_regs, num_regs);
+        memset(&r, 0, sizeof(r));
+        r.flags = fd_regs[0].which_io;
+        r.start = fd_regs[0].phys_addr;
+        sun_fdc = (struct sun_flpy_controller *)
+            sbus_ioremap(&r, 0, fd_regs[0].reg_size, "floppy");
+
+        /* Last minute sanity check... */
+        if(sun_fdc->status_82072 == 0xff) {
+                sun_fdc = NULL;
+                goto no_sun_fdc;
+        }
+
+        sun_fdops.fd_inb = sun_82077_fd_inb;
+        sun_fdops.fd_outb = sun_82077_fd_outb;
+        fdc_status = &sun_fdc->status_82077;
+
+        if (sun_fdc->dor_82077 == 0x80) {
+                sun_fdc->dor_82077 = 0x02;
+                if (sun_fdc->dor_82077 == 0x80) {
+                        sun_fdops.fd_inb = sun_82072_fd_inb;
+                        sun_fdops.fd_outb = sun_82072_fd_outb;
+                        fdc_status = &sun_fdc->status_82072;
+                }
+        }
+
+        /* Success... */
+        allowed_drive_mask = 0x01;
+        return (int) sun_fdc;
+
+no_sun_fdc:
+        return -1;
+}
+
+static int sparc_eject(void)
+{
+        set_dor(0x00, 0xff, 0x90);
+        udelay(500);
+        set_dor(0x00, 0x6f, 0x00);
+        udelay(500);
+        return 0;
+}
+
+#define fd_eject(drive) sparc_eject()
+
+#define EXTRA_FLOPPY_PARAMS
+
+#endif /* !(__ASM_SPARC_FLOPPY_H) */
diff --git a/include/asm-sparc/floppy_64.h b/arch/sparc/include/asm/floppy_64.h
index c39db1060bc7..c39db1060bc7 100644
--- a/include/asm-sparc/floppy_64.h
+++ b/arch/sparc/include/asm/floppy_64.h
diff --git a/include/asm-sparc/fpumacro.h b/arch/sparc/include/asm/fpumacro.h
index cc463fec806f..cc463fec806f 100644
--- a/include/asm-sparc/fpumacro.h
+++ b/arch/sparc/include/asm/fpumacro.h
diff --git a/include/asm-sparc64/ftrace.h b/arch/sparc/include/asm/ftrace.h
index d27716cd38c1..d27716cd38c1 100644
--- a/include/asm-sparc64/ftrace.h
+++ b/arch/sparc/include/asm/ftrace.h
diff --git a/arch/sparc/include/asm/futex.h b/arch/sparc/include/asm/futex.h
new file mode 100644
index 000000000000..736335f36713
--- /dev/null
+++ b/arch/sparc/include/asm/futex.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_FUTEX_H
+#define ___ASM_SPARC_FUTEX_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/futex_64.h>
+#else
+#include <asm/futex_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/futex_32.h b/arch/sparc/include/asm/futex_32.h
index 6a332a9f099c..6a332a9f099c 100644
--- a/include/asm-sparc/futex_32.h
+++ b/arch/sparc/include/asm/futex_32.h
diff --git a/include/asm-sparc/futex_64.h b/arch/sparc/include/asm/futex_64.h
index d8378935ae90..d8378935ae90 100644
--- a/include/asm-sparc/futex_64.h
+++ b/arch/sparc/include/asm/futex_64.h
diff --git a/arch/sparc/include/asm/hardirq.h b/arch/sparc/include/asm/hardirq.h
new file mode 100644
index 000000000000..44d4e2345148
--- /dev/null
+++ b/arch/sparc/include/asm/hardirq.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_HARDIRQ_H
+#define ___ASM_SPARC_HARDIRQ_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/hardirq_64.h>
+#else
+#include <asm/hardirq_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/hardirq_32.h b/arch/sparc/include/asm/hardirq_32.h
index 4f63ed8df551..4f63ed8df551 100644
--- a/include/asm-sparc/hardirq_32.h
+++ b/arch/sparc/include/asm/hardirq_32.h
diff --git a/include/asm-sparc/hardirq_64.h b/arch/sparc/include/asm/hardirq_64.h
index 7c29fd1a87aa..7c29fd1a87aa 100644
--- a/include/asm-sparc/hardirq_64.h
+++ b/arch/sparc/include/asm/hardirq_64.h
diff --git a/arch/sparc/include/asm/head.h b/arch/sparc/include/asm/head.h
new file mode 100644
index 000000000000..be8f03f3e731
--- /dev/null
+++ b/arch/sparc/include/asm/head.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_HEAD_H
+#define ___ASM_SPARC_HEAD_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/head_64.h>
+#else
+#include <asm/head_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/head_32.h b/arch/sparc/include/asm/head_32.h
index 7c35491a8b53..7c35491a8b53 100644
--- a/include/asm-sparc/head_32.h
+++ b/arch/sparc/include/asm/head_32.h
diff --git a/include/asm-sparc/head_64.h b/arch/sparc/include/asm/head_64.h
index 10e9dabc4c41..10e9dabc4c41 100644
--- a/include/asm-sparc/head_64.h
+++ b/arch/sparc/include/asm/head_64.h
diff --git a/include/asm-sparc/highmem.h b/arch/sparc/include/asm/highmem.h
index 3de42e776274..3de42e776274 100644
--- a/include/asm-sparc/highmem.h
+++ b/arch/sparc/include/asm/highmem.h
diff --git a/include/asm-sparc/hugetlb.h b/arch/sparc/include/asm/hugetlb.h
index 177061064ee6..177061064ee6 100644
--- a/include/asm-sparc/hugetlb.h
+++ b/arch/sparc/include/asm/hugetlb.h
diff --git a/include/asm-sparc/hvtramp.h b/arch/sparc/include/asm/hvtramp.h
index b2b9b947b3a4..b2b9b947b3a4 100644
--- a/include/asm-sparc/hvtramp.h
+++ b/arch/sparc/include/asm/hvtramp.h
diff --git a/include/asm-sparc/hw_irq.h b/arch/sparc/include/asm/hw_irq.h
index 8d30a7694be2..8d30a7694be2 100644
--- a/include/asm-sparc/hw_irq.h
+++ b/arch/sparc/include/asm/hw_irq.h
diff --git a/include/asm-sparc/hypervisor.h b/arch/sparc/include/asm/hypervisor.h
index 109ae24ba242..109ae24ba242 100644
--- a/include/asm-sparc/hypervisor.h
+++ b/arch/sparc/include/asm/hypervisor.h
diff --git a/include/asm-sparc/ide.h b/arch/sparc/include/asm/ide.h
index b7af3d658239..b7af3d658239 100644
--- a/include/asm-sparc/ide.h
+++ b/arch/sparc/include/asm/ide.h
diff --git a/include/asm-sparc/idprom.h b/arch/sparc/include/asm/idprom.h
index 6976aa2439c6..6976aa2439c6 100644
--- a/include/asm-sparc/idprom.h
+++ b/arch/sparc/include/asm/idprom.h
diff --git a/include/asm-sparc/intr_queue.h b/arch/sparc/include/asm/intr_queue.h
index 206077dedc2a..206077dedc2a 100644
--- a/include/asm-sparc/intr_queue.h
+++ b/arch/sparc/include/asm/intr_queue.h
diff --git a/include/asm-sparc/io-unit.h b/arch/sparc/include/asm/io-unit.h
index 96823b47fd45..96823b47fd45 100644
--- a/include/asm-sparc/io-unit.h
+++ b/arch/sparc/include/asm/io-unit.h
diff --git a/arch/sparc/include/asm/io.h b/arch/sparc/include/asm/io.h
new file mode 100644
index 000000000000..a34b2994937a
--- /dev/null
+++ b/arch/sparc/include/asm/io.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_IO_H
+#define ___ASM_SPARC_IO_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/io_64.h>
+#else
+#include <asm/io_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/io_32.h b/arch/sparc/include/asm/io_32.h
index 10d7da450070..10d7da450070 100644
--- a/include/asm-sparc/io_32.h
+++ b/arch/sparc/include/asm/io_32.h
diff --git a/include/asm-sparc/io_64.h b/arch/sparc/include/asm/io_64.h
index 0bff078ffdd0..0bff078ffdd0 100644
--- a/include/asm-sparc/io_64.h
+++ b/arch/sparc/include/asm/io_64.h
diff --git a/include/asm-sparc/ioctl.h b/arch/sparc/include/asm/ioctl.h
index 7d6bd51321b9..7d6bd51321b9 100644
--- a/include/asm-sparc/ioctl.h
+++ b/arch/sparc/include/asm/ioctl.h
diff --git a/include/asm-sparc/ioctls.h b/arch/sparc/include/asm/ioctls.h
index 1fe6855c5c18..1fe6855c5c18 100644
--- a/include/asm-sparc/ioctls.h
+++ b/arch/sparc/include/asm/ioctls.h
diff --git a/arch/sparc/include/asm/iommu.h b/arch/sparc/include/asm/iommu.h
new file mode 100644
index 000000000000..e650965b4a8d
--- /dev/null
+++ b/arch/sparc/include/asm/iommu.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_IOMMU_H
+#define ___ASM_SPARC_IOMMU_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/iommu_64.h>
+#else
+#include <asm/iommu_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/iommu_32.h b/arch/sparc/include/asm/iommu_32.h
index 70c589c05a10..70c589c05a10 100644
--- a/include/asm-sparc/iommu_32.h
+++ b/arch/sparc/include/asm/iommu_32.h
diff --git a/include/asm-sparc/iommu_64.h b/arch/sparc/include/asm/iommu_64.h
index d7b9afcba08b..d7b9afcba08b 100644
--- a/include/asm-sparc/iommu_64.h
+++ b/arch/sparc/include/asm/iommu_64.h
diff --git a/arch/sparc/include/asm/ipcbuf.h b/arch/sparc/include/asm/ipcbuf.h
new file mode 100644
index 000000000000..17d6ef7b23a4
--- /dev/null
+++ b/arch/sparc/include/asm/ipcbuf.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_IPCBUF_H
+#define ___ASM_SPARC_IPCBUF_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/ipcbuf_64.h>
+#else
+#include <asm/ipcbuf_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/ipcbuf_32.h b/arch/sparc/include/asm/ipcbuf_32.h
index 6387209518f2..6387209518f2 100644
--- a/include/asm-sparc/ipcbuf_32.h
+++ b/arch/sparc/include/asm/ipcbuf_32.h
diff --git a/include/asm-sparc/ipcbuf_64.h b/arch/sparc/include/asm/ipcbuf_64.h
index a44b855b98db..a44b855b98db 100644
--- a/include/asm-sparc/ipcbuf_64.h
+++ b/arch/sparc/include/asm/ipcbuf_64.h
diff --git a/arch/sparc/include/asm/irq.h b/arch/sparc/include/asm/irq.h
new file mode 100644
index 000000000000..3b44a6a14074
--- /dev/null
+++ b/arch/sparc/include/asm/irq.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_IRQ_H
+#define ___ASM_SPARC_IRQ_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/irq_64.h>
+#else
+#include <asm/irq_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/irq_32.h b/arch/sparc/include/asm/irq_32.h
index fe205cc444b8..fe205cc444b8 100644
--- a/include/asm-sparc/irq_32.h
+++ b/arch/sparc/include/asm/irq_32.h
diff --git a/include/asm-sparc/irq_64.h b/arch/sparc/include/asm/irq_64.h
index 0bb9bf531745..0bb9bf531745 100644
--- a/include/asm-sparc/irq_64.h
+++ b/arch/sparc/include/asm/irq_64.h
diff --git a/include/asm-sparc/irq_regs.h b/arch/sparc/include/asm/irq_regs.h
index 3dd9c0b70270..3dd9c0b70270 100644
--- a/include/asm-sparc/irq_regs.h
+++ b/arch/sparc/include/asm/irq_regs.h
diff --git a/arch/sparc/include/asm/irqflags.h b/arch/sparc/include/asm/irqflags.h
new file mode 100644
index 000000000000..1e138632bd3f
--- /dev/null
+++ b/arch/sparc/include/asm/irqflags.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_IRQFLAGS_H
+#define ___ASM_SPARC_IRQFLAGS_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/irqflags_64.h>
+#else
+#include <asm/irqflags_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/irqflags_32.h b/arch/sparc/include/asm/irqflags_32.h
new file mode 100644
index 000000000000..0fca9d97d44f
--- /dev/null
+++ b/arch/sparc/include/asm/irqflags_32.h
@@ -0,0 +1,39 @@
+/*
+ * include/asm/irqflags.h
+ *
+ * IRQ flags handling
+ *
+ * This file gets included from lowlevel asm headers too, to provide
+ * wrapped versions of the local_irq_*() APIs, based on the
+ * raw_local_irq_*() functions from the lowlevel headers.
+ */
+#ifndef _ASM_IRQFLAGS_H
+#define _ASM_IRQFLAGS_H
+
+#ifndef __ASSEMBLY__
+
+extern void raw_local_irq_restore(unsigned long);
+extern unsigned long __raw_local_irq_save(void);
+extern void raw_local_irq_enable(void);
+
+static inline unsigned long getipl(void)
+{
+        unsigned long retval;
+
+        __asm__ __volatile__("rd        %%psr, %0" : "=r" (retval));
+        return retval;
+}
+
+#define raw_local_save_flags(flags) ((flags) = getipl())
+#define raw_local_irq_save(flags)   ((flags) = __raw_local_irq_save())
+#define raw_local_irq_disable()     ((void) __raw_local_irq_save())
+#define raw_irqs_disabled()         ((getipl() & PSR_PIL) != 0)
+
+static inline int raw_irqs_disabled_flags(unsigned long flags)
+{
+        return ((flags & PSR_PIL) != 0);
+}
+
+#endif /* (__ASSEMBLY__) */
+
+#endif /* !(_ASM_IRQFLAGS_H) */
diff --git a/arch/sparc/include/asm/irqflags_64.h b/arch/sparc/include/asm/irqflags_64.h
new file mode 100644
index 000000000000..bb42e59162aa
--- /dev/null
+++ b/arch/sparc/include/asm/irqflags_64.h
@@ -0,0 +1,89 @@
+/*
+ * include/asm/irqflags.h
+ *
+ * IRQ flags handling
+ *
+ * This file gets included from lowlevel asm headers too, to provide
+ * wrapped versions of the local_irq_*() APIs, based on the
+ * raw_local_irq_*() functions from the lowlevel headers.
+ */
+#ifndef _ASM_IRQFLAGS_H
+#define _ASM_IRQFLAGS_H
+
+#ifndef __ASSEMBLY__
+
+static inline unsigned long __raw_local_save_flags(void)
+{
+        unsigned long flags;
+
+        __asm__ __volatile__(
+                "rdpr   %%pil, %0"
+                : "=r" (flags)
+        );
+
+        return flags;
+}
+
+#define raw_local_save_flags(flags) \
+                do { (flags) = __raw_local_save_flags(); } while (0)
+
+static inline void raw_local_irq_restore(unsigned long flags)
+{
+        __asm__ __volatile__(
+                "wrpr   %0, %%pil"
+                : /* no output */
+                : "r" (flags)
+                : "memory"
+        );
+}
+
+static inline void raw_local_irq_disable(void)
+{
+        __asm__ __volatile__(
+                "wrpr   15, %%pil"
+                : /* no outputs */
+                : /* no inputs */
+                : "memory"
+        );
+}
+
+static inline void raw_local_irq_enable(void)
+{
+        __asm__ __volatile__(
+                "wrpr   0, %%pil"
+                : /* no outputs */
+                : /* no inputs */
+                : "memory"
+        );
+}
+
+static inline int raw_irqs_disabled_flags(unsigned long flags)
+{
+        return (flags > 0);
+}
+
+static inline int raw_irqs_disabled(void)
+{
+        unsigned long flags = __raw_local_save_flags();
+
+        return raw_irqs_disabled_flags(flags);
+}
+
+/*
+ * For spinlocks, etc:
+ */
+static inline unsigned long __raw_local_irq_save(void)
+{
+        unsigned long flags = __raw_local_save_flags();
+
+        raw_local_irq_disable();
+
+        return flags;
+}
+
+#define raw_local_irq_save(flags) \
+                do { (flags) = __raw_local_irq_save(); } while (0)
+
+#endif /* (__ASSEMBLY__) */
+
+#endif /* !(_ASM_IRQFLAGS_H) */
diff --git a/include/asm-sparc/jsflash.h b/arch/sparc/include/asm/jsflash.h
index 3457f29bd73b..3457f29bd73b 100644
--- a/include/asm-sparc/jsflash.h
+++ b/arch/sparc/include/asm/jsflash.h
diff --git a/arch/sparc/include/asm/kdebug.h b/arch/sparc/include/asm/kdebug.h
new file mode 100644
index 000000000000..8d12581ca386
--- /dev/null
+++ b/arch/sparc/include/asm/kdebug.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_KDEBUG_H
+#define ___ASM_SPARC_KDEBUG_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/kdebug_64.h>
+#else
+#include <asm/kdebug_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/kdebug_32.h b/arch/sparc/include/asm/kdebug_32.h
index f69fe7d84b3c..f69fe7d84b3c 100644
--- a/include/asm-sparc/kdebug_32.h
+++ b/arch/sparc/include/asm/kdebug_32.h
diff --git a/include/asm-sparc/kdebug_64.h b/arch/sparc/include/asm/kdebug_64.h
index f905b773235a..f905b773235a 100644
--- a/include/asm-sparc/kdebug_64.h
+++ b/arch/sparc/include/asm/kdebug_64.h
diff --git a/include/asm-sparc/kgdb.h b/arch/sparc/include/asm/kgdb.h
index b6ef301d05bf..b6ef301d05bf 100644
--- a/include/asm-sparc/kgdb.h
+++ b/arch/sparc/include/asm/kgdb.h
diff --git a/include/asm-sparc/kmap_types.h b/arch/sparc/include/asm/kmap_types.h
index 602f5e034f7a..602f5e034f7a 100644
--- a/include/asm-sparc/kmap_types.h
+++ b/arch/sparc/include/asm/kmap_types.h
diff --git a/include/asm-sparc/kprobes.h b/arch/sparc/include/asm/kprobes.h
index 5879d71afdaa..5879d71afdaa 100644
--- a/include/asm-sparc/kprobes.h
+++ b/arch/sparc/include/asm/kprobes.h
diff --git a/include/asm-sparc/ldc.h b/arch/sparc/include/asm/ldc.h
index bdb524a7b814..bdb524a7b814 100644
--- a/include/asm-sparc/ldc.h
+++ b/arch/sparc/include/asm/ldc.h
diff --git a/include/asm-sparc/linkage.h b/arch/sparc/include/asm/linkage.h
index 291c2d01c44f..291c2d01c44f 100644
--- a/include/asm-sparc/linkage.h
+++ b/arch/sparc/include/asm/linkage.h
diff --git a/include/asm-sparc/lmb.h b/arch/sparc/include/asm/lmb.h
index 6a352cbcf520..6a352cbcf520 100644
--- a/include/asm-sparc/lmb.h
+++ b/arch/sparc/include/asm/lmb.h
diff --git a/include/asm-sparc/local.h b/arch/sparc/include/asm/local.h
index bc80815a435c..bc80815a435c 100644
--- a/include/asm-sparc/local.h
+++ b/arch/sparc/include/asm/local.h
diff --git a/include/asm-sparc/lsu.h b/arch/sparc/include/asm/lsu.h
index 7190f8de90a0..7190f8de90a0 100644
--- a/include/asm-sparc/lsu.h
+++ b/arch/sparc/include/asm/lsu.h
diff --git a/include/asm-sparc/machines.h b/arch/sparc/include/asm/machines.h
index c28c2f248794..c28c2f248794 100644
--- a/include/asm-sparc/machines.h
+++ b/arch/sparc/include/asm/machines.h
diff --git a/include/asm-sparc/mbus.h b/arch/sparc/include/asm/mbus.h
index 69f07a022ee6..69f07a022ee6 100644
--- a/include/asm-sparc/mbus.h
+++ b/arch/sparc/include/asm/mbus.h
diff --git a/arch/sparc/include/asm/mc146818rtc.h b/arch/sparc/include/asm/mc146818rtc.h
new file mode 100644
index 000000000000..67ed9e3a0235
--- /dev/null
+++ b/arch/sparc/include/asm/mc146818rtc.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_MC146818RTC_H
+#define ___ASM_SPARC_MC146818RTC_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/mc146818rtc_64.h>
+#else
+#include <asm/mc146818rtc_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/mc146818rtc_32.h b/arch/sparc/include/asm/mc146818rtc_32.h
index fa7eac926582..fa7eac926582 100644
--- a/include/asm-sparc/mc146818rtc_32.h
+++ b/arch/sparc/include/asm/mc146818rtc_32.h
diff --git a/include/asm-sparc/mc146818rtc_64.h b/arch/sparc/include/asm/mc146818rtc_64.h
index e9c0fcc25c6f..e9c0fcc25c6f 100644
--- a/include/asm-sparc/mc146818rtc_64.h
+++ b/arch/sparc/include/asm/mc146818rtc_64.h
diff --git a/include/asm-sparc/mdesc.h b/arch/sparc/include/asm/mdesc.h
index 1acc7272e537..1acc7272e537 100644
--- a/include/asm-sparc/mdesc.h
+++ b/arch/sparc/include/asm/mdesc.h
diff --git a/include/asm-sparc/memreg.h b/arch/sparc/include/asm/memreg.h
index 845ad2b39183..845ad2b39183 100644
--- a/include/asm-sparc/memreg.h
+++ b/arch/sparc/include/asm/memreg.h
diff --git a/include/asm-sparc/mman.h b/arch/sparc/include/asm/mman.h
index fdfbbf0a4736..fdfbbf0a4736 100644
--- a/include/asm-sparc/mman.h
+++ b/arch/sparc/include/asm/mman.h
diff --git a/arch/sparc/include/asm/mmu.h b/arch/sparc/include/asm/mmu.h
new file mode 100644
index 000000000000..88fa313887db
--- /dev/null
+++ b/arch/sparc/include/asm/mmu.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_MMU_H
+#define ___ASM_SPARC_MMU_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/mmu_64.h>
+#else
+#include <asm/mmu_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/mmu_32.h b/arch/sparc/include/asm/mmu_32.h
index ccd36d26615a..ccd36d26615a 100644
--- a/include/asm-sparc/mmu_32.h
+++ b/arch/sparc/include/asm/mmu_32.h
diff --git a/include/asm-sparc/mmu_64.h b/arch/sparc/include/asm/mmu_64.h
index 9067dc500535..9067dc500535 100644
--- a/include/asm-sparc/mmu_64.h
+++ b/arch/sparc/include/asm/mmu_64.h
diff --git a/arch/sparc/include/asm/mmu_context.h b/arch/sparc/include/asm/mmu_context.h
new file mode 100644
index 000000000000..5531346c64f9
--- /dev/null
+++ b/arch/sparc/include/asm/mmu_context.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_MMU_CONTEXT_H
+#define ___ASM_SPARC_MMU_CONTEXT_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/mmu_context_64.h>
+#else
+#include <asm/mmu_context_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/mmu_context_32.h b/arch/sparc/include/asm/mmu_context_32.h
index 671a997b9e69..671a997b9e69 100644
--- a/include/asm-sparc/mmu_context_32.h
+++ b/arch/sparc/include/asm/mmu_context_32.h
diff --git a/include/asm-sparc/mmu_context_64.h b/arch/sparc/include/asm/mmu_context_64.h
index 5693ab482606..5693ab482606 100644
--- a/include/asm-sparc/mmu_context_64.h
+++ b/arch/sparc/include/asm/mmu_context_64.h
diff --git a/include/asm-sparc/mmzone.h b/arch/sparc/include/asm/mmzone.h
index ebf5986c12ed..ebf5986c12ed 100644
--- a/include/asm-sparc/mmzone.h
+++ b/arch/sparc/include/asm/mmzone.h
diff --git a/arch/sparc/include/asm/module.h b/arch/sparc/include/asm/module.h
new file mode 100644
index 000000000000..e82cf9a3e60e
--- /dev/null
+++ b/arch/sparc/include/asm/module.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_MODULE_H
+#define ___ASM_SPARC_MODULE_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/module_64.h>
+#else
+#include <asm/module_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/module_32.h b/arch/sparc/include/asm/module_32.h
index cbd9e67b0c0b..cbd9e67b0c0b 100644
--- a/include/asm-sparc/module_32.h
+++ b/arch/sparc/include/asm/module_32.h
diff --git a/include/asm-sparc/module_64.h b/arch/sparc/include/asm/module_64.h
index 3d77ba465783..3d77ba465783 100644
--- a/include/asm-sparc/module_64.h
+++ b/arch/sparc/include/asm/module_64.h
diff --git a/arch/sparc/include/asm/mostek.h b/arch/sparc/include/asm/mostek.h
new file mode 100644
index 000000000000..433be3e0a69b
--- /dev/null
+++ b/arch/sparc/include/asm/mostek.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_MOSTEK_H
+#define ___ASM_SPARC_MOSTEK_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/mostek_64.h>
+#else
+#include <asm/mostek_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/mostek_32.h b/arch/sparc/include/asm/mostek_32.h
index a99590c4c507..a99590c4c507 100644
--- a/include/asm-sparc/mostek_32.h
+++ b/arch/sparc/include/asm/mostek_32.h
diff --git a/include/asm-sparc/mostek_64.h b/arch/sparc/include/asm/mostek_64.h
index c5652de2ace2..c5652de2ace2 100644
--- a/include/asm-sparc/mostek_64.h
+++ b/arch/sparc/include/asm/mostek_64.h
diff --git a/include/asm-sparc/mpmbox.h b/arch/sparc/include/asm/mpmbox.h
index f8423039b242..f8423039b242 100644
--- a/include/asm-sparc/mpmbox.h
+++ b/arch/sparc/include/asm/mpmbox.h
diff --git a/include/asm-sparc/msgbuf.h b/arch/sparc/include/asm/msgbuf.h
index efc7cbe9788f..efc7cbe9788f 100644
--- a/include/asm-sparc/msgbuf.h
+++ b/arch/sparc/include/asm/msgbuf.h
diff --git a/include/asm-sparc/msi.h b/arch/sparc/include/asm/msi.h
index 724ca5667052..724ca5667052 100644
--- a/include/asm-sparc/msi.h
+++ b/arch/sparc/include/asm/msi.h
diff --git a/include/asm-sparc/mutex.h b/arch/sparc/include/asm/mutex.h
index 458c1f7fbc18..458c1f7fbc18 100644
--- a/include/asm-sparc/mutex.h
+++ b/arch/sparc/include/asm/mutex.h
diff --git a/include/asm-sparc/mxcc.h b/arch/sparc/include/asm/mxcc.h
index c0517bd05bde..c0517bd05bde 100644
--- a/include/asm-sparc/mxcc.h
+++ b/arch/sparc/include/asm/mxcc.h
diff --git a/include/asm-sparc/ns87303.h b/arch/sparc/include/asm/ns87303.h
index 686defe6aaa0..686defe6aaa0 100644
--- a/include/asm-sparc/ns87303.h
+++ b/arch/sparc/include/asm/ns87303.h
diff --git a/include/asm-sparc/obio.h b/arch/sparc/include/asm/obio.h
index 1a7544ceb574..1a7544ceb574 100644
--- a/include/asm-sparc/obio.h
+++ b/arch/sparc/include/asm/obio.h
diff --git a/include/asm-sparc/of_device.h b/arch/sparc/include/asm/of_device.h
index e5f5aedc2293..e5f5aedc2293 100644
--- a/include/asm-sparc/of_device.h
+++ b/arch/sparc/include/asm/of_device.h
diff --git a/arch/sparc/include/asm/of_platform.h b/arch/sparc/include/asm/of_platform.h
new file mode 100644
index 000000000000..aa699775ffba
--- /dev/null
+++ b/arch/sparc/include/asm/of_platform.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_OF_PLATFORM_H
+#define ___ASM_SPARC_OF_PLATFORM_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/of_platform_64.h>
+#else
+#include <asm/of_platform_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/of_platform_32.h b/arch/sparc/include/asm/of_platform_32.h
new file mode 100644
index 000000000000..723f7c9b7411
--- /dev/null
+++ b/arch/sparc/include/asm/of_platform_32.h
@@ -0,0 +1,24 @@
+#ifndef _ASM_SPARC_OF_PLATFORM_H
+#define _ASM_SPARC_OF_PLATFORM_H
+/*
+ *    Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corp.
+ *                       <benh@kernel.crashing.org>
+ *    Modified for Sparc by merging parts of asm/of_device.h
+ *              by Stephen Rothwell
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ */
+
+/* This is just here during the transition */
+#include <linux/of_platform.h>
+
+extern struct bus_type ebus_bus_type;
+extern struct bus_type sbus_bus_type;
+
+#define of_bus_type     of_platform_bus_type    /* for compatibility */
+
+#endif  /* _ASM_SPARC_OF_PLATFORM_H */
diff --git a/arch/sparc/include/asm/of_platform_64.h b/arch/sparc/include/asm/of_platform_64.h
new file mode 100644
index 000000000000..4f66a5f6342d
--- /dev/null
+++ b/arch/sparc/include/asm/of_platform_64.h
@@ -0,0 +1,25 @@
+#ifndef _ASM_SPARC64_OF_PLATFORM_H
+#define _ASM_SPARC64_OF_PLATFORM_H
+/*
+ *    Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corp.
+ *                       <benh@kernel.crashing.org>
+ *    Modified for Sparc by merging parts of asm/of_device.h
+ *              by Stephen Rothwell
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ */
+
+/* This is just here during the transition */
+#include <linux/of_platform.h>
+
+extern struct bus_type isa_bus_type;
+extern struct bus_type ebus_bus_type;
+extern struct bus_type sbus_bus_type;
+
+#define of_bus_type     of_platform_bus_type    /* for compatibility */
+
+#endif  /* _ASM_SPARC64_OF_PLATFORM_H */
diff --git a/arch/sparc/include/asm/openprom.h b/arch/sparc/include/asm/openprom.h
new file mode 100644
index 000000000000..aaeae905ed3f
--- /dev/null
+++ b/arch/sparc/include/asm/openprom.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_OPENPROM_H
+#define ___ASM_SPARC_OPENPROM_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/openprom_64.h>
+#else
+#include <asm/openprom_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/openprom_32.h b/arch/sparc/include/asm/openprom_32.h
index 8b1649f29ed9..8b1649f29ed9 100644
--- a/include/asm-sparc/openprom_32.h
+++ b/arch/sparc/include/asm/openprom_32.h
diff --git a/include/asm-sparc/openprom_64.h b/arch/sparc/include/asm/openprom_64.h
index b69e4a8c9170..b69e4a8c9170 100644
--- a/include/asm-sparc/openprom_64.h
+++ b/arch/sparc/include/asm/openprom_64.h
diff --git a/include/asm-sparc/openpromio.h b/arch/sparc/include/asm/openpromio.h
index 917fb8e9c633..917fb8e9c633 100644
--- a/include/asm-sparc/openpromio.h
+++ b/arch/sparc/include/asm/openpromio.h
diff --git a/arch/sparc/include/asm/oplib.h b/arch/sparc/include/asm/oplib.h
new file mode 100644
index 000000000000..72e04e13a6b4
--- /dev/null
+++ b/arch/sparc/include/asm/oplib.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_OPLIB_H
+#define ___ASM_SPARC_OPLIB_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/oplib_64.h>
+#else
+#include <asm/oplib_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/oplib_32.h b/arch/sparc/include/asm/oplib_32.h
index b2631da259e0..b2631da259e0 100644
--- a/include/asm-sparc/oplib_32.h
+++ b/arch/sparc/include/asm/oplib_32.h
diff --git a/include/asm-sparc/oplib_64.h b/arch/sparc/include/asm/oplib_64.h
index 6d2c2ca98039..6d2c2ca98039 100644
--- a/include/asm-sparc/oplib_64.h
+++ b/arch/sparc/include/asm/oplib_64.h
diff --git a/arch/sparc/include/asm/page.h b/arch/sparc/include/asm/page.h
new file mode 100644
index 000000000000..f21de0349025
--- /dev/null
+++ b/arch/sparc/include/asm/page.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_PAGE_H
+#define ___ASM_SPARC_PAGE_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/page_64.h>
+#else
+#include <asm/page_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/page_32.h b/arch/sparc/include/asm/page_32.h
index cf5fb70ca1c1..cf5fb70ca1c1 100644
--- a/include/asm-sparc/page_32.h
+++ b/arch/sparc/include/asm/page_32.h
diff --git a/include/asm-sparc/page_64.h b/arch/sparc/include/asm/page_64.h
index b579b910ef51..b579b910ef51 100644
--- a/include/asm-sparc/page_64.h
+++ b/arch/sparc/include/asm/page_64.h
diff --git a/include/asm-sparc/param.h b/arch/sparc/include/asm/param.h
index 9836d9a3cb9a..9836d9a3cb9a 100644
--- a/include/asm-sparc/param.h
+++ b/arch/sparc/include/asm/param.h
diff --git a/include/asm-sparc/parport.h b/arch/sparc/include/asm/parport.h
index 7818b2523b8d..7818b2523b8d 100644
--- a/include/asm-sparc/parport.h
+++ b/arch/sparc/include/asm/parport.h
diff --git a/include/asm-sparc/pbm.h b/arch/sparc/include/asm/pbm.h
index 458a4916d14d..458a4916d14d 100644
--- a/include/asm-sparc/pbm.h
+++ b/arch/sparc/include/asm/pbm.h
diff --git a/arch/sparc/include/asm/pci.h b/arch/sparc/include/asm/pci.h
new file mode 100644
index 000000000000..6e14fd179335
--- /dev/null
+++ b/arch/sparc/include/asm/pci.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_PCI_H
+#define ___ASM_SPARC_PCI_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/pci_64.h>
+#else
+#include <asm/pci_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/pci_32.h b/arch/sparc/include/asm/pci_32.h
index 0ee949d220c0..0ee949d220c0 100644
--- a/include/asm-sparc/pci_32.h
+++ b/arch/sparc/include/asm/pci_32.h
diff --git a/include/asm-sparc/pci_64.h b/arch/sparc/include/asm/pci_64.h
index 4f79a54948f6..4f79a54948f6 100644
--- a/include/asm-sparc/pci_64.h
+++ b/arch/sparc/include/asm/pci_64.h
diff --git a/include/asm-sparc/pcic.h b/arch/sparc/include/asm/pcic.h
index f20ef562b265..f20ef562b265 100644
--- a/include/asm-sparc/pcic.h
+++ b/arch/sparc/include/asm/pcic.h
diff --git a/arch/sparc/include/asm/percpu.h b/arch/sparc/include/asm/percpu.h
new file mode 100644
index 000000000000..bfb1d19ff1bf
--- /dev/null
+++ b/arch/sparc/include/asm/percpu.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_PERCPU_H
+#define ___ASM_SPARC_PERCPU_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/percpu_64.h>
+#else
+#include <asm/percpu_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/percpu_32.h b/arch/sparc/include/asm/percpu_32.h
index 06066a7aaec3..06066a7aaec3 100644
--- a/include/asm-sparc/percpu_32.h
+++ b/arch/sparc/include/asm/percpu_32.h
diff --git a/include/asm-sparc/percpu_64.h b/arch/sparc/include/asm/percpu_64.h
index bee64593023e..bee64593023e 100644
--- a/include/asm-sparc/percpu_64.h
+++ b/arch/sparc/include/asm/percpu_64.h
diff --git a/include/asm-sparc/perfctr.h b/arch/sparc/include/asm/perfctr.h
index 836873002b75..836873002b75 100644
--- a/include/asm-sparc/perfctr.h
+++ b/arch/sparc/include/asm/perfctr.h
diff --git a/arch/sparc/include/asm/pgalloc.h b/arch/sparc/include/asm/pgalloc.h
new file mode 100644
index 000000000000..b6db1f7cdcab
--- /dev/null
+++ b/arch/sparc/include/asm/pgalloc.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_PGALLOC_H
+#define ___ASM_SPARC_PGALLOC_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/pgalloc_64.h>
+#else
+#include <asm/pgalloc_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/pgalloc_32.h b/arch/sparc/include/asm/pgalloc_32.h
index 681582d26969..681582d26969 100644
--- a/include/asm-sparc/pgalloc_32.h
+++ b/arch/sparc/include/asm/pgalloc_32.h
diff --git a/include/asm-sparc/pgalloc_64.h b/arch/sparc/include/asm/pgalloc_64.h
index 5bdfa2c6e400..5bdfa2c6e400 100644
--- a/include/asm-sparc/pgalloc_64.h
+++ b/arch/sparc/include/asm/pgalloc_64.h
diff --git a/arch/sparc/include/asm/pgtable.h b/arch/sparc/include/asm/pgtable.h
new file mode 100644
index 000000000000..59ba6f620732
--- /dev/null
+++ b/arch/sparc/include/asm/pgtable.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_PGTABLE_H
+#define ___ASM_SPARC_PGTABLE_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/pgtable_64.h>
+#else
+#include <asm/pgtable_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/pgtable_32.h b/arch/sparc/include/asm/pgtable_32.h
new file mode 100644
index 000000000000..08237fda8874
--- /dev/null
+++ b/arch/sparc/include/asm/pgtable_32.h
@@ -0,0 +1,480 @@
+#ifndef _SPARC_PGTABLE_H
+#define _SPARC_PGTABLE_H
+
+/*  asm/pgtable.h:  Defines and functions used to work
+ *                        with Sparc page tables.
+ *
+ *  Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ *  Copyright (C) 1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ */
+
+#ifndef __ASSEMBLY__
+#include <asm-generic/4level-fixup.h>
+
+#include <linux/spinlock.h>
+#include <linux/swap.h>
+#include <asm/types.h>
+#ifdef CONFIG_SUN4
+#include <asm/pgtsun4.h>
+#else
+#include <asm/pgtsun4c.h>
+#endif
+#include <asm/pgtsrmmu.h>
+#include <asm/vac-ops.h>
+#include <asm/oplib.h>
+#include <asm/btfixup.h>
+#include <asm/system.h>
+
+
+struct vm_area_struct;
+struct page;
+
+extern void load_mmu(void);
+extern unsigned long calc_highpages(void);
+
+BTFIXUPDEF_SIMM13(pgdir_shift)
+BTFIXUPDEF_SETHI(pgdir_size)
+BTFIXUPDEF_SETHI(pgdir_mask)
+
+BTFIXUPDEF_SIMM13(ptrs_per_pmd)
+BTFIXUPDEF_SIMM13(ptrs_per_pgd)
+BTFIXUPDEF_SIMM13(user_ptrs_per_pgd)
+
+#define pte_ERROR(e)   __builtin_trap()
+#define pmd_ERROR(e)   __builtin_trap()
+#define pgd_ERROR(e)   __builtin_trap()
+
+BTFIXUPDEF_INT(page_none)
+BTFIXUPDEF_INT(page_copy)
+BTFIXUPDEF_INT(page_readonly)
+BTFIXUPDEF_INT(page_kernel)
+
+#define PMD_SHIFT               SUN4C_PMD_SHIFT
+#define PMD_SIZE                (1UL << PMD_SHIFT)
+#define PMD_MASK                (~(PMD_SIZE-1))
+#define PMD_ALIGN(__addr)       (((__addr) + ~PMD_MASK) & PMD_MASK)
+#define PGDIR_SHIFT             BTFIXUP_SIMM13(pgdir_shift)
+#define PGDIR_SIZE              BTFIXUP_SETHI(pgdir_size)
+#define PGDIR_MASK              BTFIXUP_SETHI(pgdir_mask)
+#define PTRS_PER_PTE            1024
+#define PTRS_PER_PMD            BTFIXUP_SIMM13(ptrs_per_pmd)
+#define PTRS_PER_PGD            BTFIXUP_SIMM13(ptrs_per_pgd)
+#define USER_PTRS_PER_PGD       BTFIXUP_SIMM13(user_ptrs_per_pgd)
+#define FIRST_USER_ADDRESS      0
+#define PTE_SIZE                (PTRS_PER_PTE*4)
+
+#define PAGE_NONE      __pgprot(BTFIXUP_INT(page_none))
+extern pgprot_t PAGE_SHARED;
+#define PAGE_COPY      __pgprot(BTFIXUP_INT(page_copy))
+#define PAGE_READONLY  __pgprot(BTFIXUP_INT(page_readonly))
+
+extern unsigned long page_kernel;
+
+#ifdef MODULE
+#define PAGE_KERNEL     page_kernel
+#else
+#define PAGE_KERNEL    __pgprot(BTFIXUP_INT(page_kernel))
+#endif
+
+/* Top-level page directory */
+extern pgd_t swapper_pg_dir[1024];
+
+extern void paging_init(void);
+
+/* Page table for 0-4MB for everybody, on the Sparc this
+ * holds the same as on the i386.
+ */
+extern pte_t pg0[1024];
+extern pte_t pg1[1024];
+extern pte_t pg2[1024];
+extern pte_t pg3[1024];
+
+extern unsigned long ptr_in_current_pgd;
+
+/* Here is a trick, since mmap.c need the initializer elements for
+ * protection_map[] to be constant at compile time, I set the following
+ * to all zeros.  I set it to the real values after I link in the
+ * appropriate MMU page table routines at boot time.
+ */
+#define __P000  __pgprot(0)
+#define __P001  __pgprot(0)
+#define __P010  __pgprot(0)
+#define __P011  __pgprot(0)
+#define __P100  __pgprot(0)
+#define __P101  __pgprot(0)
+#define __P110  __pgprot(0)
+#define __P111  __pgprot(0)
+
+#define __S000  __pgprot(0)
+#define __S001  __pgprot(0)
+#define __S010  __pgprot(0)
+#define __S011  __pgprot(0)
+#define __S100  __pgprot(0)
+#define __S101  __pgprot(0)
+#define __S110  __pgprot(0)
+#define __S111  __pgprot(0)
+
+extern int num_contexts;
+
+/* First physical page can be anywhere, the following is needed so that
+ * va-->pa and vice versa conversions work properly without performance
+ * hit for all __pa()/__va() operations.
+ */
+extern unsigned long phys_base;
+extern unsigned long pfn_base;
+
+/*
+ * BAD_PAGETABLE is used when we need a bogus page-table, while
+ * BAD_PAGE is used for a bogus page.
+ *
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+extern pte_t * __bad_pagetable(void);
+extern pte_t __bad_page(void);
+extern unsigned long empty_zero_page;
+
+#define BAD_PAGETABLE __bad_pagetable()
+#define BAD_PAGE __bad_page()
+#define ZERO_PAGE(vaddr) (virt_to_page(&empty_zero_page))
+
+/*
+ */
+BTFIXUPDEF_CALL_CONST(struct page *, pmd_page, pmd_t)
+BTFIXUPDEF_CALL_CONST(unsigned long, pgd_page_vaddr, pgd_t)
+
+#define pmd_page(pmd) BTFIXUP_CALL(pmd_page)(pmd)
+#define pgd_page_vaddr(pgd) BTFIXUP_CALL(pgd_page_vaddr)(pgd)
+
+BTFIXUPDEF_SETHI(none_mask)
+BTFIXUPDEF_CALL_CONST(int, pte_present, pte_t)
+BTFIXUPDEF_CALL(void, pte_clear, pte_t *)
+
+static inline int pte_none(pte_t pte)
+{
+        return !(pte_val(pte) & ~BTFIXUP_SETHI(none_mask));
+}
+
+#define pte_present(pte) BTFIXUP_CALL(pte_present)(pte)
+#define pte_clear(mm,addr,pte) BTFIXUP_CALL(pte_clear)(pte)
+
+BTFIXUPDEF_CALL_CONST(int, pmd_bad, pmd_t)
+BTFIXUPDEF_CALL_CONST(int, pmd_present, pmd_t)
+BTFIXUPDEF_CALL(void, pmd_clear, pmd_t *)
+
+static inline int pmd_none(pmd_t pmd)
+{
+        return !(pmd_val(pmd) & ~BTFIXUP_SETHI(none_mask));
+}
+
+#define pmd_bad(pmd) BTFIXUP_CALL(pmd_bad)(pmd)
+#define pmd_present(pmd) BTFIXUP_CALL(pmd_present)(pmd)
+#define pmd_clear(pmd) BTFIXUP_CALL(pmd_clear)(pmd)
+
+BTFIXUPDEF_CALL_CONST(int, pgd_none, pgd_t)
+BTFIXUPDEF_CALL_CONST(int, pgd_bad, pgd_t)
+BTFIXUPDEF_CALL_CONST(int, pgd_present, pgd_t)
+BTFIXUPDEF_CALL(void, pgd_clear, pgd_t *)
+
+#define pgd_none(pgd) BTFIXUP_CALL(pgd_none)(pgd)
+#define pgd_bad(pgd) BTFIXUP_CALL(pgd_bad)(pgd)
+#define pgd_present(pgd) BTFIXUP_CALL(pgd_present)(pgd)
+#define pgd_clear(pgd) BTFIXUP_CALL(pgd_clear)(pgd)
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+BTFIXUPDEF_HALF(pte_writei)
+BTFIXUPDEF_HALF(pte_dirtyi)
+BTFIXUPDEF_HALF(pte_youngi)
+
+static int pte_write(pte_t pte) __attribute_const__;
+static inline int pte_write(pte_t pte)
+{
+        return pte_val(pte) & BTFIXUP_HALF(pte_writei);
+}
+
+static int pte_dirty(pte_t pte) __attribute_const__;
+static inline int pte_dirty(pte_t pte)
+{
+        return pte_val(pte) & BTFIXUP_HALF(pte_dirtyi);
+}
+
+static int pte_young(pte_t pte) __attribute_const__;
+static inline int pte_young(pte_t pte)
+{
+        return pte_val(pte) & BTFIXUP_HALF(pte_youngi);
+}
+
+/*
+ * The following only work if pte_present() is not true.
+ */
+BTFIXUPDEF_HALF(pte_filei)
+
+static int pte_file(pte_t pte) __attribute_const__;
+static inline int pte_file(pte_t pte)
+{
+        return pte_val(pte) & BTFIXUP_HALF(pte_filei);
+}
+
+static inline int pte_special(pte_t pte)
+{
+        return 0;
+}
+
+/*
+ */
+BTFIXUPDEF_HALF(pte_wrprotecti)
+BTFIXUPDEF_HALF(pte_mkcleani)
+BTFIXUPDEF_HALF(pte_mkoldi)
+
+static pte_t pte_wrprotect(pte_t pte) __attribute_const__;
+static inline pte_t pte_wrprotect(pte_t pte)
+{
+        return __pte(pte_val(pte) & ~BTFIXUP_HALF(pte_wrprotecti));
+}
+
+static pte_t pte_mkclean(pte_t pte) __attribute_const__;
+static inline pte_t pte_mkclean(pte_t pte)
+{
+        return __pte(pte_val(pte) & ~BTFIXUP_HALF(pte_mkcleani));
+}
+
+static pte_t pte_mkold(pte_t pte) __attribute_const__;
+static inline pte_t pte_mkold(pte_t pte)
+{
+        return __pte(pte_val(pte) & ~BTFIXUP_HALF(pte_mkoldi));
+}
+
+BTFIXUPDEF_CALL_CONST(pte_t, pte_mkwrite, pte_t)
+BTFIXUPDEF_CALL_CONST(pte_t, pte_mkdirty, pte_t)
+BTFIXUPDEF_CALL_CONST(pte_t, pte_mkyoung, pte_t)
+
+#define pte_mkwrite(pte) BTFIXUP_CALL(pte_mkwrite)(pte)
+#define pte_mkdirty(pte) BTFIXUP_CALL(pte_mkdirty)(pte)
+#define pte_mkyoung(pte) BTFIXUP_CALL(pte_mkyoung)(pte)
+
+#define pte_mkspecial(pte)    (pte)
+
+#define pfn_pte(pfn, prot)              mk_pte(pfn_to_page(pfn), prot)
+
+BTFIXUPDEF_CALL(unsigned long,   pte_pfn, pte_t)
+#define pte_pfn(pte) BTFIXUP_CALL(pte_pfn)(pte)
+#define pte_page(pte)   pfn_to_page(pte_pfn(pte))
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+BTFIXUPDEF_CALL_CONST(pte_t, mk_pte, struct page *, pgprot_t)
+
+BTFIXUPDEF_CALL_CONST(pte_t, mk_pte_phys, unsigned long, pgprot_t)
+BTFIXUPDEF_CALL_CONST(pte_t, mk_pte_io, unsigned long, pgprot_t, int)
+BTFIXUPDEF_CALL_CONST(pgprot_t, pgprot_noncached, pgprot_t)
+
+#define mk_pte(page,pgprot) BTFIXUP_CALL(mk_pte)(page,pgprot)
+#define mk_pte_phys(page,pgprot) BTFIXUP_CALL(mk_pte_phys)(page,pgprot)
+#define mk_pte_io(page,pgprot,space) BTFIXUP_CALL(mk_pte_io)(page,pgprot,space)
+
+#define pgprot_noncached(pgprot) BTFIXUP_CALL(pgprot_noncached)(pgprot)
+
+BTFIXUPDEF_INT(pte_modify_mask)
+
+static pte_t pte_modify(pte_t pte, pgprot_t newprot) __attribute_const__;
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+        return __pte((pte_val(pte) & BTFIXUP_INT(pte_modify_mask)) |
+                pgprot_val(newprot));
+}
+
+#define pgd_index(address) ((address) >> PGDIR_SHIFT)
+
+/* to find an entry in a page-table-directory */
+#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address))
+
+/* to find an entry in a kernel page-table-directory */
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+
+/* Find an entry in the second-level page table.. */
+BTFIXUPDEF_CALL(pmd_t *, pmd_offset, pgd_t *, unsigned long)
+#define pmd_offset(dir,addr) BTFIXUP_CALL(pmd_offset)(dir,addr)
+
+/* Find an entry in the third-level page table.. */
+BTFIXUPDEF_CALL(pte_t *, pte_offset_kernel, pmd_t *, unsigned long)
+#define pte_offset_kernel(dir,addr) BTFIXUP_CALL(pte_offset_kernel)(dir,addr)
+
+/*
+ * This shortcut works on sun4m (and sun4d) because the nocache area is static,
+ * and sun4c is guaranteed to have no highmem anyway.
+ */
+#define pte_offset_map(d, a)            pte_offset_kernel(d,a)
+#define pte_offset_map_nested(d, a)     pte_offset_kernel(d,a)
+
+#define pte_unmap(pte)          do{}while(0)
+#define pte_unmap_nested(pte)   do{}while(0)
+
+/* Certain architectures need to do special things when pte's
+ * within a page table are directly modified.  Thus, the following
+ * hook is made available.
+ */
+
+BTFIXUPDEF_CALL(void, set_pte, pte_t *, pte_t)
+
+#define set_pte(ptep,pteval) BTFIXUP_CALL(set_pte)(ptep,pteval)
+#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
+
+struct seq_file;
+BTFIXUPDEF_CALL(void, mmu_info, struct seq_file *)
+
+#define mmu_info(p) BTFIXUP_CALL(mmu_info)(p)
+
+/* Fault handler stuff... */
+#define FAULT_CODE_PROT     0x1
+#define FAULT_CODE_WRITE    0x2
+#define FAULT_CODE_USER     0x4
+
+BTFIXUPDEF_CALL(void, update_mmu_cache, struct vm_area_struct *, unsigned long, pte_t)
+
+#define update_mmu_cache(vma,addr,pte) BTFIXUP_CALL(update_mmu_cache)(vma,addr,pte)
+
+BTFIXUPDEF_CALL(void, sparc_mapiorange, unsigned int, unsigned long,
+    unsigned long, unsigned int)
+BTFIXUPDEF_CALL(void, sparc_unmapiorange, unsigned long, unsigned int)
+#define sparc_mapiorange(bus,pa,va,len) BTFIXUP_CALL(sparc_mapiorange)(bus,pa,va,len)
+#define sparc_unmapiorange(va,len) BTFIXUP_CALL(sparc_unmapiorange)(va,len)
+
+extern int invalid_segment;
+
+/* Encode and de-code a swap entry */
+BTFIXUPDEF_CALL(unsigned long, __swp_type, swp_entry_t)
+BTFIXUPDEF_CALL(unsigned long, __swp_offset, swp_entry_t)
+BTFIXUPDEF_CALL(swp_entry_t, __swp_entry, unsigned long, unsigned long)
+
+#define __swp_type(__x)                 BTFIXUP_CALL(__swp_type)(__x)
+#define __swp_offset(__x)               BTFIXUP_CALL(__swp_offset)(__x)
+#define __swp_entry(__type,__off)       BTFIXUP_CALL(__swp_entry)(__type,__off)
+
+#define __pte_to_swp_entry(pte)         ((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)           ((pte_t) { (x).val })
+
+/* file-offset-in-pte helpers */
+BTFIXUPDEF_CALL(unsigned long, pte_to_pgoff, pte_t pte);
+BTFIXUPDEF_CALL(pte_t, pgoff_to_pte, unsigned long pgoff);
+
+#define pte_to_pgoff(pte) BTFIXUP_CALL(pte_to_pgoff)(pte)
+#define pgoff_to_pte(off) BTFIXUP_CALL(pgoff_to_pte)(off)
+
+/*
+ * This is made a constant because mm/fremap.c required a constant.
+ * Note that layout of these bits is different between sun4c.c and srmmu.c.
+ */
+#define PTE_FILE_MAX_BITS 24
+
+/*
+ */
+struct ctx_list {
+        struct ctx_list *next;
+        struct ctx_list *prev;
+        unsigned int ctx_number;
+        struct mm_struct *ctx_mm;
+};
+
+extern struct ctx_list *ctx_list_pool;  /* Dynamically allocated */
+extern struct ctx_list ctx_free;        /* Head of free list */
+extern struct ctx_list ctx_used;        /* Head of used contexts list */
+
+#define NO_CONTEXT     -1
+
+static inline void remove_from_ctx_list(struct ctx_list *entry)
+{
+        entry->next->prev = entry->prev;
+        entry->prev->next = entry->next;
+}
+
+static inline void add_to_ctx_list(struct ctx_list *head, struct ctx_list *entry)
+{
+        entry->next = head;
+        (entry->prev = head->prev)->next = entry;
+        head->prev = entry;
+}
+#define add_to_free_ctxlist(entry) add_to_ctx_list(&ctx_free, entry)
+#define add_to_used_ctxlist(entry) add_to_ctx_list(&ctx_used, entry)
+
+static inline unsigned long
+__get_phys (unsigned long addr)
+{
+        switch (sparc_cpu_model){
+        case sun4:
+        case sun4c:
+                return sun4c_get_pte (addr) << PAGE_SHIFT;
+        case sun4m:
+        case sun4d:
+                return ((srmmu_get_pte (addr) & 0xffffff00) << 4);
+        default:
+                return 0;
+        }
+}
+
+static inline int
+__get_iospace (unsigned long addr)
+{
+        switch (sparc_cpu_model){
+        case sun4:
+        case sun4c:
+                return -1; /* Don't check iospace on sun4c */
+        case sun4m:
+        case sun4d:
+                return (srmmu_get_pte (addr) >> 28);
+        default:
+                return -1;
+        }
+}
+
+extern unsigned long *sparc_valid_addr_bitmap;
+
+/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
+#define kern_addr_valid(addr) \
+        (test_bit(__pa((unsigned long)(addr))>>20, sparc_valid_addr_bitmap))
+
+extern int io_remap_pfn_range(struct vm_area_struct *vma,
+                              unsigned long from, unsigned long pfn,
+                              unsigned long size, pgprot_t prot);
+
+/*
+ * For sparc32&64, the pfn in io_remap_pfn_range() carries <iospace> in
+ * its high 4 bits.  These macros/functions put it there or get it from there.
+ */
+#define MK_IOSPACE_PFN(space, pfn)      (pfn | (space << (BITS_PER_LONG - 4)))
+#define GET_IOSPACE(pfn)                (pfn >> (BITS_PER_LONG - 4))
+#define GET_PFN(pfn)                    (pfn & 0x0fffffffUL)
+
+#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
+#define ptep_set_access_flags(__vma, __address, __ptep, __entry, __dirty) \
+({                                                                        \
+        int __changed = !pte_same(*(__ptep), __entry);                    \
+        if (__changed) {                                                  \
+                set_pte_at((__vma)->vm_mm, (__address), __ptep, __entry); \
+                flush_tlb_page(__vma, __address);                         \
+        }                                                                 \
+        (sparc_cpu_model == sun4c) || __changed;                          \
+})
+
+#include <asm-generic/pgtable.h>
+
+#endif /* !(__ASSEMBLY__) */
+
+#define VMALLOC_START           0xfe600000
+/* XXX Alter this when I get around to fixing sun4c - Anton */
+#define VMALLOC_END             0xffc00000
+
+
+/* We provide our own get_unmapped_area to cope with VA holes for userland */
+#define HAVE_ARCH_UNMAPPED_AREA
+
+/*
+ * No page table caches to initialise
+ */
+#define pgtable_cache_init()    do { } while (0)
+
+#endif /* !(_SPARC_PGTABLE_H) */
diff --git a/include/asm-sparc/pgtable_64.h b/arch/sparc/include/asm/pgtable_64.h
index bb9ec2cce355..bb9ec2cce355 100644
--- a/include/asm-sparc/pgtable_64.h
+++ b/arch/sparc/include/asm/pgtable_64.h
diff --git a/include/asm-sparc/pgtsrmmu.h b/arch/sparc/include/asm/pgtsrmmu.h
index 808555fc1d58..808555fc1d58 100644
--- a/include/asm-sparc/pgtsrmmu.h
+++ b/arch/sparc/include/asm/pgtsrmmu.h
diff --git a/include/asm-sparc/pgtsun4.h b/arch/sparc/include/asm/pgtsun4.h
index 5a0d661fb82e..5a0d661fb82e 100644
--- a/include/asm-sparc/pgtsun4.h
+++ b/arch/sparc/include/asm/pgtsun4.h
diff --git a/include/asm-sparc/pgtsun4c.h b/arch/sparc/include/asm/pgtsun4c.h
index aeb25e912179..aeb25e912179 100644
--- a/include/asm-sparc/pgtsun4c.h
+++ b/arch/sparc/include/asm/pgtsun4c.h
diff --git a/include/asm-sparc/pil.h b/arch/sparc/include/asm/pil.h
index 71819bb943fc..71819bb943fc 100644
--- a/include/asm-sparc/pil.h
+++ b/arch/sparc/include/asm/pil.h
diff --git a/include/asm-sparc/poll.h b/arch/sparc/include/asm/poll.h
index 091d3ad2e830..091d3ad2e830 100644
--- a/include/asm-sparc/poll.h
+++ b/arch/sparc/include/asm/poll.h
diff --git a/arch/sparc/include/asm/posix_types.h b/arch/sparc/include/asm/posix_types.h
new file mode 100644
index 000000000000..03a0e091a884
--- /dev/null
+++ b/arch/sparc/include/asm/posix_types.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_POSIX_TYPES_H
+#define ___ASM_SPARC_POSIX_TYPES_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/posix_types_64.h>
+#else
+#include <asm/posix_types_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/posix_types_32.h b/arch/sparc/include/asm/posix_types_32.h
index 6bb6eb1ca0f2..6bb6eb1ca0f2 100644
--- a/include/asm-sparc/posix_types_32.h
+++ b/arch/sparc/include/asm/posix_types_32.h
diff --git a/include/asm-sparc/posix_types_64.h b/arch/sparc/include/asm/posix_types_64.h
index ba8f93295763..ba8f93295763 100644
--- a/include/asm-sparc/posix_types_64.h
+++ b/arch/sparc/include/asm/posix_types_64.h
diff --git a/arch/sparc/include/asm/processor.h b/arch/sparc/include/asm/processor.h
new file mode 100644
index 000000000000..9da9646bf6c6
--- /dev/null
+++ b/arch/sparc/include/asm/processor.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_PROCESSOR_H
+#define ___ASM_SPARC_PROCESSOR_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/processor_64.h>
+#else
+#include <asm/processor_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/processor_32.h b/arch/sparc/include/asm/processor_32.h
new file mode 100644
index 000000000000..2ae67a2e7f3a
--- /dev/null
+++ b/arch/sparc/include/asm/processor_32.h
@@ -0,0 +1,129 @@
+/* include/asm/processor.h
+ *
+ * Copyright (C) 1994 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef __ASM_SPARC_PROCESSOR_H
+#define __ASM_SPARC_PROCESSOR_H
+
+/*
+ * Sparc32 implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ void *pc; __asm__("sethi %%hi(1f), %0; or %0, %%lo(1f), %0;\n1:" : "=r" (pc)); pc; })
+
+#include <asm/psr.h>
+#include <asm/ptrace.h>
+#include <asm/head.h>
+#include <asm/signal.h>
+#include <asm/btfixup.h>
+#include <asm/page.h>
+
+/*
+ * The sparc has no problems with write protection
+ */
+#define wp_works_ok 1
+#define wp_works_ok__is_a_macro /* for versions in ksyms.c */
+
+/* Whee, this is STACK_TOP + PAGE_SIZE and the lowest kernel address too...
+ * That one page is used to protect kernel from intruders, so that
+ * we can make our access_ok test faster
+ */
+#define TASK_SIZE       PAGE_OFFSET
+#ifdef __KERNEL__
+#define STACK_TOP       (PAGE_OFFSET - PAGE_SIZE)
+#define STACK_TOP_MAX   STACK_TOP
+#endif /* __KERNEL__ */
+
+struct task_struct;
+
+#ifdef __KERNEL__
+struct fpq {
+        unsigned long *insn_addr;
+        unsigned long insn;
+};
+#endif
+
+typedef struct {
+        int seg;
+} mm_segment_t;
+
+/* The Sparc processor specific thread struct. */
+struct thread_struct {
+        struct pt_regs *kregs;
+        unsigned int _pad1;
+
+        /* Special child fork kpsr/kwim values. */
+        unsigned long fork_kpsr __attribute__ ((aligned (8)));
+        unsigned long fork_kwim;
+
+        /* Floating point regs */
+        unsigned long   float_regs[32] __attribute__ ((aligned (8)));
+        unsigned long   fsr;
+        unsigned long   fpqdepth;
+        struct fpq      fpqueue[16];
+        unsigned long flags;
+        mm_segment_t current_ds;
+};
+
+#define SPARC_FLAG_KTHREAD      0x1    /* task is a kernel thread */
+#define SPARC_FLAG_UNALIGNED    0x2    /* is allowed to do unaligned accesses */
+
+#define INIT_THREAD  { \
+        .flags = SPARC_FLAG_KTHREAD, \
+        .current_ds = KERNEL_DS, \
+}
+
+/* Return saved PC of a blocked thread. */
+extern unsigned long thread_saved_pc(struct task_struct *t);
+
+/* Do necessary setup to start up a newly executed thread. */
+static inline void start_thread(struct pt_regs * regs, unsigned long pc,
+                                    unsigned long sp)
+{
+        register unsigned long zero asm("g1");
+
+        regs->psr = (regs->psr & (PSR_CWP)) | PSR_S;
+        regs->pc = ((pc & (~3)) - 4);
+        regs->npc = regs->pc + 4;
+        regs->y = 0;
+        zero = 0;
+        __asm__ __volatile__("std\t%%g0, [%0 + %3 + 0x00]\n\t"
+                             "std\t%%g0, [%0 + %3 + 0x08]\n\t"
+                             "std\t%%g0, [%0 + %3 + 0x10]\n\t"
+                             "std\t%%g0, [%0 + %3 + 0x18]\n\t"
+                             "std\t%%g0, [%0 + %3 + 0x20]\n\t"
+                             "std\t%%g0, [%0 + %3 + 0x28]\n\t"
+                             "std\t%%g0, [%0 + %3 + 0x30]\n\t"
+                             "st\t%1, [%0 + %3 + 0x38]\n\t"
+                             "st\t%%g0, [%0 + %3 + 0x3c]"
+                             : /* no outputs */
+                             : "r" (regs),
+                               "r" (sp - sizeof(struct reg_window)),
+                               "r" (zero),
+                               "i" ((const unsigned long)(&((struct pt_regs *)0)->u_regs[0]))
+                             : "memory");
+}
+
+/* Free all resources held by a thread. */
+#define release_thread(tsk)             do { } while(0)
+extern pid_t kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
+
+/* Prepare to copy thread state - unlazy all lazy status */
+#define prepare_to_copy(tsk)    do { } while (0)
+
+extern unsigned long get_wchan(struct task_struct *);
+
+#define task_pt_regs(tsk) ((tsk)->thread.kregs)
+#define KSTK_EIP(tsk)  ((tsk)->thread.kregs->pc)
+#define KSTK_ESP(tsk)  ((tsk)->thread.kregs->u_regs[UREG_FP])
+
+#ifdef __KERNEL__
+
+extern struct task_struct *last_task_used_math;
+
+#define cpu_relax()     barrier()
+
+#endif
+
+#endif /* __ASM_SPARC_PROCESSOR_H */
diff --git a/arch/sparc/include/asm/processor_64.h b/arch/sparc/include/asm/processor_64.h
new file mode 100644
index 000000000000..137a6bd72fc8
--- /dev/null
+++ b/arch/sparc/include/asm/processor_64.h
@@ -0,0 +1,237 @@
+/*
+ * include/asm/processor.h
+ *
+ * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef __ASM_SPARC64_PROCESSOR_H
+#define __ASM_SPARC64_PROCESSOR_H
+
+/*
+ * Sparc64 implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ void *pc; __asm__("rd %%pc, %0" : "=r" (pc)); pc; })
+
+#include <asm/asi.h>
+#include <asm/pstate.h>
+#include <asm/ptrace.h>
+#include <asm/page.h>
+
+/* The sparc has no problems with write protection */
+#define wp_works_ok 1
+#define wp_works_ok__is_a_macro /* for versions in ksyms.c */
+
+/*
+ * User lives in his very own context, and cannot reference us. Note
+ * that TASK_SIZE is a misnomer, it really gives maximum user virtual
+ * address that the kernel will allocate out.
+ *
+ * XXX No longer using virtual page tables, kill this upper limit...
+ */
+#define VA_BITS         44
+#ifndef __ASSEMBLY__
+#define VPTE_SIZE       (1UL << (VA_BITS - PAGE_SHIFT + 3))
+#else
+#define VPTE_SIZE       (1 << (VA_BITS - PAGE_SHIFT + 3))
+#endif
+
+#define TASK_SIZE       ((unsigned long)-VPTE_SIZE)
+#define TASK_SIZE_OF(tsk) \
+        (test_tsk_thread_flag(tsk,TIF_32BIT) ? \
+         (1UL << 32UL) : TASK_SIZE)
+#ifdef __KERNEL__
+
+#define STACK_TOP32     ((1UL << 32UL) - PAGE_SIZE)
+#define STACK_TOP64     (0x0000080000000000UL - (1UL << 32UL))
+
+#define STACK_TOP       (test_thread_flag(TIF_32BIT) ? \
+                         STACK_TOP32 : STACK_TOP64)
+
+#define STACK_TOP_MAX   STACK_TOP64
+
+#endif
+
+#ifndef __ASSEMBLY__
+
+typedef struct {
+        unsigned char seg;
+} mm_segment_t;
+
+/* The Sparc processor specific thread struct. */
+/* XXX This should die, everything can go into thread_info now. */
+struct thread_struct {
+#ifdef CONFIG_DEBUG_SPINLOCK
+        /* How many spinlocks held by this thread.
+         * Used with spin lock debugging to catch tasks
+         * sleeping illegally with locks held.
+         */
+        int smp_lock_count;
+        unsigned int smp_lock_pc;
+#else
+        int dummy; /* f'in gcc bug... */
+#endif
+};
+
+#endif /* !(__ASSEMBLY__) */
+
+#ifndef CONFIG_DEBUG_SPINLOCK
+#define INIT_THREAD  {                  \
+        0,                              \
+}
+#else /* CONFIG_DEBUG_SPINLOCK */
+#define INIT_THREAD  {                                  \
+/* smp_lock_count, smp_lock_pc, */                      \
+   0,              0,                                   \
+}
+#endif /* !(CONFIG_DEBUG_SPINLOCK) */
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+
+/* Return saved PC of a blocked thread. */
+struct task_struct;
+extern unsigned long thread_saved_pc(struct task_struct *);
+
+/* On Uniprocessor, even in RMO processes see TSO semantics */
+#ifdef CONFIG_SMP
+#define TSTATE_INITIAL_MM       TSTATE_TSO
+#else
+#define TSTATE_INITIAL_MM       TSTATE_RMO
+#endif
+
+/* Do necessary setup to start up a newly executed thread. */
+#define start_thread(regs, pc, sp) \
+do { \
+        unsigned long __asi = ASI_PNF; \
+        regs->tstate = (regs->tstate & (TSTATE_CWP)) | (TSTATE_INITIAL_MM|TSTATE_IE) | (__asi << 24UL); \
+        regs->tpc = ((pc & (~3)) - 4); \
+        regs->tnpc = regs->tpc + 4; \
+        regs->y = 0; \
+        set_thread_wstate(1 << 3); \
+        if (current_thread_info()->utraps) { \
+                if (*(current_thread_info()->utraps) < 2) \
+                        kfree(current_thread_info()->utraps); \
+                else \
+                        (*(current_thread_info()->utraps))--; \
+                current_thread_info()->utraps = NULL; \
+        } \
+        __asm__ __volatile__( \
+        "stx            %%g0, [%0 + %2 + 0x00]\n\t" \
+        "stx            %%g0, [%0 + %2 + 0x08]\n\t" \
+        "stx            %%g0, [%0 + %2 + 0x10]\n\t" \
+        "stx            %%g0, [%0 + %2 + 0x18]\n\t" \
+        "stx            %%g0, [%0 + %2 + 0x20]\n\t" \
+        "stx            %%g0, [%0 + %2 + 0x28]\n\t" \
+        "stx            %%g0, [%0 + %2 + 0x30]\n\t" \
+        "stx            %%g0, [%0 + %2 + 0x38]\n\t" \
+        "stx            %%g0, [%0 + %2 + 0x40]\n\t" \
+        "stx            %%g0, [%0 + %2 + 0x48]\n\t" \
+        "stx            %%g0, [%0 + %2 + 0x50]\n\t" \
+        "stx            %%g0, [%0 + %2 + 0x58]\n\t" \
+        "stx            %%g0, [%0 + %2 + 0x60]\n\t" \
+        "stx            %%g0, [%0 + %2 + 0x68]\n\t" \
+        "stx            %1,   [%0 + %2 + 0x70]\n\t" \
+        "stx            %%g0, [%0 + %2 + 0x78]\n\t" \
+        "wrpr           %%g0, (1 << 3), %%wstate\n\t" \
+        : \
+        : "r" (regs), "r" (sp - sizeof(struct reg_window) - STACK_BIAS), \
+          "i" ((const unsigned long)(&((struct pt_regs *)0)->u_regs[0]))); \
+} while (0)
+
+#define start_thread32(regs, pc, sp) \
+do { \
+        unsigned long __asi = ASI_PNF; \
+        pc &= 0x00000000ffffffffUL; \
+        sp &= 0x00000000ffffffffUL; \
+        regs->tstate = (regs->tstate & (TSTATE_CWP))|(TSTATE_INITIAL_MM|TSTATE_IE|TSTATE_AM) | (__asi << 24UL); \
+        regs->tpc = ((pc & (~3)) - 4); \
+        regs->tnpc = regs->tpc + 4; \
+        regs->y = 0; \
+        set_thread_wstate(2 << 3); \
+        if (current_thread_info()->utraps) { \
+                if (*(current_thread_info()->utraps) < 2) \
+                        kfree(current_thread_info()->utraps); \
+                else \
+                        (*(current_thread_info()->utraps))--; \
+                current_thread_info()->utraps = NULL; \
+        } \
+        __asm__ __volatile__( \
+        "stx            %%g0, [%0 + %2 + 0x00]\n\t" \
+        "stx            %%g0, [%0 + %2 + 0x08]\n\t" \
+        "stx            %%g0, [%0 + %2 + 0x10]\n\t" \
+        "stx            %%g0, [%0 + %2 + 0x18]\n\t" \
+        "stx            %%g0, [%0 + %2 + 0x20]\n\t" \
+        "stx            %%g0, [%0 + %2 + 0x28]\n\t" \
+        "stx            %%g0, [%0 + %2 + 0x30]\n\t" \
+        "stx            %%g0, [%0 + %2 + 0x38]\n\t" \
+        "stx            %%g0, [%0 + %2 + 0x40]\n\t" \
+        "stx            %%g0, [%0 + %2 + 0x48]\n\t" \
+        "stx            %%g0, [%0 + %2 + 0x50]\n\t" \
+        "stx            %%g0, [%0 + %2 + 0x58]\n\t" \
+        "stx            %%g0, [%0 + %2 + 0x60]\n\t" \
+        "stx            %%g0, [%0 + %2 + 0x68]\n\t" \
+        "stx            %1,   [%0 + %2 + 0x70]\n\t" \
+        "stx            %%g0, [%0 + %2 + 0x78]\n\t" \
+        "wrpr           %%g0, (2 << 3), %%wstate\n\t" \
+        : \
+        : "r" (regs), "r" (sp - sizeof(struct reg_window32)), \
+          "i" ((const unsigned long)(&((struct pt_regs *)0)->u_regs[0]))); \
+} while (0)
+
+/* Free all resources held by a thread. */
+#define release_thread(tsk)             do { } while (0)
+
+/* Prepare to copy thread state - unlazy all lazy status */
+#define prepare_to_copy(tsk)    do { } while (0)
+
+extern pid_t kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
+
+extern unsigned long get_wchan(struct task_struct *task);
+
+#define task_pt_regs(tsk) (task_thread_info(tsk)->kregs)
+#define KSTK_EIP(tsk)  (task_pt_regs(tsk)->tpc)
+#define KSTK_ESP(tsk)  (task_pt_regs(tsk)->u_regs[UREG_FP])
+
+#define cpu_relax()     barrier()
+
+/* Prefetch support.  This is tuned for UltraSPARC-III and later.
+ * UltraSPARC-I will treat these as nops, and UltraSPARC-II has
+ * a shallower prefetch queue than later chips.
+ */
+#define ARCH_HAS_PREFETCH
+#define ARCH_HAS_PREFETCHW
+#define ARCH_HAS_SPINLOCK_PREFETCH
+
+static inline void prefetch(const void *x)
+{
+        /* We do not use the read prefetch mnemonic because that
+         * prefetches into the prefetch-cache which only is accessible
+         * by floating point operations in UltraSPARC-III and later.
+         * By contrast, "#one_write" prefetches into the L2 cache
+         * in shared state.
+         */
+        __asm__ __volatile__("prefetch [%0], #one_write"
+                             : /* no outputs */
+                             : "r" (x));
+}
+
+static inline void prefetchw(const void *x)
+{
+        /* The most optimal prefetch to use for writes is
+         * "#n_writes".  This brings the cacheline into the
+         * L2 cache in "owned" state.
+         */
+        __asm__ __volatile__("prefetch [%0], #n_writes"
+                             : /* no outputs */
+                             : "r" (x));
+}
+
+#define spin_lock_prefetch(x)   prefetchw(x)
+
+#define HAVE_ARCH_PICK_MMAP_LAYOUT
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(__ASM_SPARC64_PROCESSOR_H) */
diff --git a/include/asm-sparc/prom.h b/arch/sparc/include/asm/prom.h
index fd55522481cd..fd55522481cd 100644
--- a/include/asm-sparc/prom.h
+++ b/arch/sparc/include/asm/prom.h
diff --git a/include/asm-sparc/psr.h b/arch/sparc/include/asm/psr.h
index b8c0e5f0a66b..b8c0e5f0a66b 100644
--- a/include/asm-sparc/psr.h
+++ b/arch/sparc/include/asm/psr.h
diff --git a/include/asm-sparc/psrcompat.h b/arch/sparc/include/asm/psrcompat.h
index 44b6327dbbf5..44b6327dbbf5 100644
--- a/include/asm-sparc/psrcompat.h
+++ b/arch/sparc/include/asm/psrcompat.h
diff --git a/include/asm-sparc/pstate.h b/arch/sparc/include/asm/pstate.h
index a26a53777bb0..a26a53777bb0 100644
--- a/include/asm-sparc/pstate.h
+++ b/arch/sparc/include/asm/pstate.h
diff --git a/arch/sparc/include/asm/ptrace.h b/arch/sparc/include/asm/ptrace.h
new file mode 100644
index 000000000000..6dcbe2eed2e2
--- /dev/null
+++ b/arch/sparc/include/asm/ptrace.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_PTRACE_H
+#define ___ASM_SPARC_PTRACE_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/ptrace_64.h>
+#else
+#include <asm/ptrace_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/ptrace_32.h b/arch/sparc/include/asm/ptrace_32.h
new file mode 100644
index 000000000000..d43c88b86834
--- /dev/null
+++ b/arch/sparc/include/asm/ptrace_32.h
@@ -0,0 +1,176 @@
+#ifndef _SPARC_PTRACE_H
+#define _SPARC_PTRACE_H
+
+#include <asm/psr.h>
+
+/* This struct defines the way the registers are stored on the
+ * stack during a system call and basically all traps.
+ */
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+
+struct pt_regs {
+        unsigned long psr;
+        unsigned long pc;
+        unsigned long npc;
+        unsigned long y;
+        unsigned long u_regs[16]; /* globals and ins */
+};
+
+#define UREG_G0        0
+#define UREG_G1        1
+#define UREG_G2        2
+#define UREG_G3        3
+#define UREG_G4        4
+#define UREG_G5        5
+#define UREG_G6        6
+#define UREG_G7        7
+#define UREG_I0        8
+#define UREG_I1        9
+#define UREG_I2        10
+#define UREG_I3        11
+#define UREG_I4        12
+#define UREG_I5        13
+#define UREG_I6        14
+#define UREG_I7        15
+#define UREG_WIM       UREG_G0
+#define UREG_FADDR     UREG_G0
+#define UREG_FP        UREG_I6
+#define UREG_RETPC     UREG_I7
+
+static inline bool pt_regs_is_syscall(struct pt_regs *regs)
+{
+        return (regs->psr & PSR_SYSCALL);
+}
+
+static inline bool pt_regs_clear_syscall(struct pt_regs *regs)
+{
+        return (regs->psr &= ~PSR_SYSCALL);
+}
+
+/* A register window */
+struct reg_window {
+        unsigned long locals[8];
+        unsigned long ins[8];
+};
+
+/* A Sparc stack frame */
+struct sparc_stackf {
+        unsigned long locals[8];
+        unsigned long ins[6];
+        struct sparc_stackf *fp;
+        unsigned long callers_pc;
+        char *structptr;
+        unsigned long xargs[6];
+        unsigned long xxargs[1];
+};
+
+#define TRACEREG_SZ   sizeof(struct pt_regs)
+#define STACKFRAME_SZ sizeof(struct sparc_stackf)
+
+#ifdef __KERNEL__
+
+#define user_mode(regs) (!((regs)->psr & PSR_PS))
+#define instruction_pointer(regs) ((regs)->pc)
+#define user_stack_pointer(regs) ((regs)->u_regs[UREG_FP])
+unsigned long profile_pc(struct pt_regs *);
+extern void show_regs(struct pt_regs *);
+#endif
+
+#else /* __ASSEMBLY__ */
+/* For assembly code. */
+#define TRACEREG_SZ       0x50
+#define STACKFRAME_SZ     0x60
+#endif
+
+/*
+ * The asm-offsets.h is a generated file, so we cannot include it.
+ * It may be OK for glibc headers, but it's utterly pointless for C code.
+ * The assembly code using those offsets has to include it explicitly.
+ */
+/* #include <asm/asm-offsets.h> */
+
+/* These are for pt_regs. */
+#define PT_PSR    0x0
+#define PT_PC     0x4
+#define PT_NPC    0x8
+#define PT_Y      0xc
+#define PT_G0     0x10
+#define PT_WIM    PT_G0
+#define PT_G1     0x14
+#define PT_G2     0x18
+#define PT_G3     0x1c
+#define PT_G4     0x20
+#define PT_G5     0x24
+#define PT_G6     0x28
+#define PT_G7     0x2c
+#define PT_I0     0x30
+#define PT_I1     0x34
+#define PT_I2     0x38
+#define PT_I3     0x3c
+#define PT_I4     0x40
+#define PT_I5     0x44
+#define PT_I6     0x48
+#define PT_FP     PT_I6
+#define PT_I7     0x4c
+
+/* Reg_window offsets */
+#define RW_L0     0x00
+#define RW_L1     0x04
+#define RW_L2     0x08
+#define RW_L3     0x0c
+#define RW_L4     0x10
+#define RW_L5     0x14
+#define RW_L6     0x18
+#define RW_L7     0x1c
+#define RW_I0     0x20
+#define RW_I1     0x24
+#define RW_I2     0x28
+#define RW_I3     0x2c
+#define RW_I4     0x30
+#define RW_I5     0x34
+#define RW_I6     0x38
+#define RW_I7     0x3c
+
+/* Stack_frame offsets */
+#define SF_L0     0x00
+#define SF_L1     0x04
+#define SF_L2     0x08
+#define SF_L3     0x0c
+#define SF_L4     0x10
+#define SF_L5     0x14
+#define SF_L6     0x18
+#define SF_L7     0x1c
+#define SF_I0     0x20
+#define SF_I1     0x24
+#define SF_I2     0x28
+#define SF_I3     0x2c
+#define SF_I4     0x30
+#define SF_I5     0x34
+#define SF_FP     0x38
+#define SF_PC     0x3c
+#define SF_RETP   0x40
+#define SF_XARG0  0x44
+#define SF_XARG1  0x48
+#define SF_XARG2  0x4c
+#define SF_XARG3  0x50
+#define SF_XARG4  0x54
+#define SF_XARG5  0x58
+#define SF_XXARG  0x5c
+
+/* Stuff for the ptrace system call */
+#define PTRACE_SPARC_DETACH       11
+#define PTRACE_GETREGS            12
+#define PTRACE_SETREGS            13
+#define PTRACE_GETFPREGS          14
+#define PTRACE_SETFPREGS          15
+#define PTRACE_READDATA           16
+#define PTRACE_WRITEDATA          17
+#define PTRACE_READTEXT           18
+#define PTRACE_WRITETEXT          19
+#define PTRACE_GETFPAREGS         20
+#define PTRACE_SETFPAREGS         21
+
+#endif /* !(_SPARC_PTRACE_H) */
diff --git a/arch/sparc/include/asm/ptrace_64.h b/arch/sparc/include/asm/ptrace_64.h
new file mode 100644
index 000000000000..ec6d45c84cd0
--- /dev/null
+++ b/arch/sparc/include/asm/ptrace_64.h
@@ -0,0 +1,347 @@
+#ifndef _SPARC64_PTRACE_H
+#define _SPARC64_PTRACE_H
+
+#include <asm/pstate.h>
+
+/* This struct defines the way the registers are stored on the
+ * stack during a system call and basically all traps.
+ */
+
+/* This magic value must have the low 9 bits clear,
+ * as that is where we encode the %tt value, see below.
+ */
+#define PT_REGS_MAGIC 0x57ac6c00
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+
+struct pt_regs {
+        unsigned long u_regs[16]; /* globals and ins */
+        unsigned long tstate;
+        unsigned long tpc;
+        unsigned long tnpc;
+        unsigned int y;
+
+        /* We encode a magic number, PT_REGS_MAGIC, along
+         * with the %tt (trap type) register value at trap
+         * entry time.  The magic number allows us to identify
+         * accurately a trap stack frame in the stack
+         * unwinder, and the %tt value allows us to test
+         * things like "in a system call" etc. for an arbitray
+         * process.
+         *
+         * The PT_REGS_MAGIC is choosen such that it can be
+         * loaded completely using just a sethi instruction.
+         */
+        unsigned int magic;
+};
+
+static inline int pt_regs_trap_type(struct pt_regs *regs)
+{
+        return regs->magic & 0x1ff;
+}
+
+static inline bool pt_regs_is_syscall(struct pt_regs *regs)
+{
+        return (regs->tstate & TSTATE_SYSCALL);
+}
+
+static inline bool pt_regs_clear_syscall(struct pt_regs *regs)
+{
+        return (regs->tstate &= ~TSTATE_SYSCALL);
+}
+
+struct pt_regs32 {
+        unsigned int psr;
+        unsigned int pc;
+        unsigned int npc;
+        unsigned int y;
+        unsigned int u_regs[16]; /* globals and ins */
+};
+
+#define UREG_G0        0
+#define UREG_G1        1
+#define UREG_G2        2
+#define UREG_G3        3
+#define UREG_G4        4
+#define UREG_G5        5
+#define UREG_G6        6
+#define UREG_G7        7
+#define UREG_I0        8
+#define UREG_I1        9
+#define UREG_I2        10
+#define UREG_I3        11
+#define UREG_I4        12
+#define UREG_I5        13
+#define UREG_I6        14
+#define UREG_I7        15
+#define UREG_FP        UREG_I6
+#define UREG_RETPC     UREG_I7
+
+/* A V9 register window */
+struct reg_window {
+        unsigned long locals[8];
+        unsigned long ins[8];
+};
+
+/* A 32-bit register window. */
+struct reg_window32 {
+        unsigned int locals[8];
+        unsigned int ins[8];
+};
+
+/* A V9 Sparc stack frame */
+struct sparc_stackf {
+        unsigned long locals[8];
+        unsigned long ins[6];
+        struct sparc_stackf *fp;
+        unsigned long callers_pc;
+        char *structptr;
+        unsigned long xargs[6];
+        unsigned long xxargs[1];
+};
+
+/* A 32-bit Sparc stack frame */
+struct sparc_stackf32 {
+        unsigned int locals[8];
+        unsigned int ins[6];
+        unsigned int fp;
+        unsigned int callers_pc;
+        unsigned int structptr;
+        unsigned int xargs[6];
+        unsigned int xxargs[1];
+};
+
+struct sparc_trapf {
+        unsigned long locals[8];
+        unsigned long ins[8];
+        unsigned long _unused;
+        struct pt_regs *regs;
+};
+
+#define TRACEREG_SZ     sizeof(struct pt_regs)
+#define STACKFRAME_SZ   sizeof(struct sparc_stackf)
+
+#define TRACEREG32_SZ   sizeof(struct pt_regs32)
+#define STACKFRAME32_SZ sizeof(struct sparc_stackf32)
+
+#ifdef __KERNEL__
+
+struct global_reg_snapshot {
+        unsigned long           tstate;
+        unsigned long           tpc;
+        unsigned long           tnpc;
+        unsigned long           o7;
+        unsigned long           i7;
+        struct thread_info      *thread;
+        unsigned long           pad1;
+        unsigned long           pad2;
+};
+
+#define __ARCH_WANT_COMPAT_SYS_PTRACE
+
+#define force_successful_syscall_return()           \
+do {    current_thread_info()->syscall_noerror = 1; \
+} while (0)
+#define user_mode(regs) (!((regs)->tstate & TSTATE_PRIV))
+#define instruction_pointer(regs) ((regs)->tpc)
+#define user_stack_pointer(regs) ((regs)->u_regs[UREG_FP])
+#define regs_return_value(regs) ((regs)->u_regs[UREG_I0])
+#ifdef CONFIG_SMP
+extern unsigned long profile_pc(struct pt_regs *);
+#else
+#define profile_pc(regs) instruction_pointer(regs)
+#endif
+extern void show_regs(struct pt_regs *);
+extern void __show_regs(struct pt_regs *);
+#endif
+
+#else /* __ASSEMBLY__ */
+/* For assembly code. */
+#define TRACEREG_SZ             0xa0
+#define STACKFRAME_SZ           0xc0
+
+#define TRACEREG32_SZ           0x50
+#define STACKFRAME32_SZ         0x60
+#endif
+
+#ifdef __KERNEL__
+#define STACK_BIAS              2047
+#endif
+
+/* These are for pt_regs. */
+#define PT_V9_G0     0x00
+#define PT_V9_G1     0x08
+#define PT_V9_G2     0x10
+#define PT_V9_G3     0x18
+#define PT_V9_G4     0x20
+#define PT_V9_G5     0x28
+#define PT_V9_G6     0x30
+#define PT_V9_G7     0x38
+#define PT_V9_I0     0x40
+#define PT_V9_I1     0x48
+#define PT_V9_I2     0x50
+#define PT_V9_I3     0x58
+#define PT_V9_I4     0x60
+#define PT_V9_I5     0x68
+#define PT_V9_I6     0x70
+#define PT_V9_FP     PT_V9_I6
+#define PT_V9_I7     0x78
+#define PT_V9_TSTATE 0x80
+#define PT_V9_TPC    0x88
+#define PT_V9_TNPC   0x90
+#define PT_V9_Y      0x98
+#define PT_V9_MAGIC  0x9c
+#define PT_TSTATE       PT_V9_TSTATE
+#define PT_TPC          PT_V9_TPC
+#define PT_TNPC         PT_V9_TNPC
+
+/* These for pt_regs32. */
+#define PT_PSR    0x0
+#define PT_PC     0x4
+#define PT_NPC    0x8
+#define PT_Y      0xc
+#define PT_G0     0x10
+#define PT_WIM    PT_G0
+#define PT_G1     0x14
+#define PT_G2     0x18
+#define PT_G3     0x1c
+#define PT_G4     0x20
+#define PT_G5     0x24
+#define PT_G6     0x28
+#define PT_G7     0x2c
+#define PT_I0     0x30
+#define PT_I1     0x34
+#define PT_I2     0x38
+#define PT_I3     0x3c
+#define PT_I4     0x40
+#define PT_I5     0x44
+#define PT_I6     0x48
+#define PT_FP     PT_I6
+#define PT_I7     0x4c
+
+/* Reg_window offsets */
+#define RW_V9_L0     0x00
+#define RW_V9_L1     0x08
+#define RW_V9_L2     0x10
+#define RW_V9_L3     0x18
+#define RW_V9_L4     0x20
+#define RW_V9_L5     0x28
+#define RW_V9_L6     0x30
+#define RW_V9_L7     0x38
+#define RW_V9_I0     0x40
+#define RW_V9_I1     0x48
+#define RW_V9_I2     0x50
+#define RW_V9_I3     0x58
+#define RW_V9_I4     0x60
+#define RW_V9_I5     0x68
+#define RW_V9_I6     0x70
+#define RW_V9_I7     0x78
+
+#define RW_L0     0x00
+#define RW_L1     0x04
+#define RW_L2     0x08
+#define RW_L3     0x0c
+#define RW_L4     0x10
+#define RW_L5     0x14
+#define RW_L6     0x18
+#define RW_L7     0x1c
+#define RW_I0     0x20
+#define RW_I1     0x24
+#define RW_I2     0x28
+#define RW_I3     0x2c
+#define RW_I4     0x30
+#define RW_I5     0x34
+#define RW_I6     0x38
+#define RW_I7     0x3c
+
+/* Stack_frame offsets */
+#define SF_V9_L0     0x00
+#define SF_V9_L1     0x08
+#define SF_V9_L2     0x10
+#define SF_V9_L3     0x18
+#define SF_V9_L4     0x20
+#define SF_V9_L5     0x28
+#define SF_V9_L6     0x30
+#define SF_V9_L7     0x38
+#define SF_V9_I0     0x40
+#define SF_V9_I1     0x48
+#define SF_V9_I2     0x50
+#define SF_V9_I3     0x58
+#define SF_V9_I4     0x60
+#define SF_V9_I5     0x68
+#define SF_V9_FP     0x70
+#define SF_V9_PC     0x78
+#define SF_V9_RETP   0x80
+#define SF_V9_XARG0  0x88
+#define SF_V9_XARG1  0x90
+#define SF_V9_XARG2  0x98
+#define SF_V9_XARG3  0xa0
+#define SF_V9_XARG4  0xa8
+#define SF_V9_XARG5  0xb0
+#define SF_V9_XXARG  0xb8
+
+#define SF_L0     0x00
+#define SF_L1     0x04
+#define SF_L2     0x08
+#define SF_L3     0x0c
+#define SF_L4     0x10
+#define SF_L5     0x14
+#define SF_L6     0x18
+#define SF_L7     0x1c
+#define SF_I0     0x20
+#define SF_I1     0x24
+#define SF_I2     0x28
+#define SF_I3     0x2c
+#define SF_I4     0x30
+#define SF_I5     0x34
+#define SF_FP     0x38
+#define SF_PC     0x3c
+#define SF_RETP   0x40
+#define SF_XARG0  0x44
+#define SF_XARG1  0x48
+#define SF_XARG2  0x4c
+#define SF_XARG3  0x50
+#define SF_XARG4  0x54
+#define SF_XARG5  0x58
+#define SF_XXARG  0x5c
+
+#ifdef __KERNEL__
+
+/* global_reg_snapshot offsets */
+#define GR_SNAP_TSTATE  0x00
+#define GR_SNAP_TPC     0x08
+#define GR_SNAP_TNPC    0x10
+#define GR_SNAP_O7      0x18
+#define GR_SNAP_I7      0x20
+#define GR_SNAP_THREAD  0x28
+#define GR_SNAP_PAD1    0x30
+#define GR_SNAP_PAD2    0x38
+
+#endif  /*  __KERNEL__  */
+
+/* Stuff for the ptrace system call */
+#define PTRACE_SPARC_DETACH       11
+#define PTRACE_GETREGS            12
+#define PTRACE_SETREGS            13
+#define PTRACE_GETFPREGS          14
+#define PTRACE_SETFPREGS          15
+#define PTRACE_READDATA           16
+#define PTRACE_WRITEDATA          17
+#define PTRACE_READTEXT           18
+#define PTRACE_WRITETEXT          19
+#define PTRACE_GETFPAREGS         20
+#define PTRACE_SETFPAREGS         21
+
+/* There are for debugging 64-bit processes, either from a 32 or 64 bit
+ * parent.  Thus their complements are for debugging 32-bit processes only.
+ */
+
+#define PTRACE_GETREGS64          22
+#define PTRACE_SETREGS64          23
+/* PTRACE_SYSCALL is 24 */
+#define PTRACE_GETFPREGS64        25
+#define PTRACE_SETFPREGS64        26
+
+#endif /* !(_SPARC64_PTRACE_H) */
diff --git a/include/asm-sparc/reboot.h b/arch/sparc/include/asm/reboot.h
index 3f3f43f5be5e..3f3f43f5be5e 100644
--- a/include/asm-sparc/reboot.h
+++ b/arch/sparc/include/asm/reboot.h
diff --git a/arch/sparc/include/asm/reg.h b/arch/sparc/include/asm/reg.h
new file mode 100644
index 000000000000..0c16e19cae4d
--- /dev/null
+++ b/arch/sparc/include/asm/reg.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_REG_H
+#define ___ASM_SPARC_REG_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/reg_64.h>
+#else
+#include <asm/reg_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/reg_32.h b/arch/sparc/include/asm/reg_32.h
new file mode 100644
index 000000000000..1efb056fb3d1
--- /dev/null
+++ b/arch/sparc/include/asm/reg_32.h
@@ -0,0 +1,79 @@
+/*
+ * linux/include/asm/reg.h
+ * Layout of the registers as expected by gdb on the Sparc
+ * we should replace the user.h definitions with those in
+ * this file, we don't even use the other
+ * -miguel
+ *
+ * The names of the structures, constants and aliases in this file
+ * have the same names as the sunos ones, some programs rely on these
+ * names (gdb for example).
+ *
+ */
+
+#ifndef __SPARC_REG_H
+#define __SPARC_REG_H
+
+struct regs {
+        int     r_psr;
+#define r_ps r_psr
+        int     r_pc;
+        int     r_npc;
+        int     r_y;
+        int     r_g1;
+        int     r_g2;
+        int     r_g3;
+        int     r_g4;
+        int     r_g5;
+        int     r_g6;
+        int     r_g7;
+        int     r_o0;
+        int     r_o1;
+        int     r_o2;
+        int     r_o3;
+        int     r_o4;
+        int     r_o5;
+        int     r_o6;
+        int     r_o7;
+};
+
+struct fpq {
+        unsigned long *addr;
+        unsigned long instr;
+};
+
+struct  fq {
+        union {
+                double  whole;
+                struct  fpq fpq;
+        } FQu;
+};
+
+#define FPU_REGS_TYPE unsigned int
+#define FPU_FSR_TYPE unsigned
+
+struct fp_status {
+        union {
+                FPU_REGS_TYPE Fpu_regs[32];
+                double  Fpu_dregs[16];
+        } fpu_fr;
+        FPU_FSR_TYPE Fpu_fsr;
+        unsigned Fpu_flags;
+        unsigned Fpu_extra;
+        unsigned Fpu_qcnt;
+        struct fq Fpu_q[16];
+};
+
+#define fpu_regs  f_fpstatus.fpu_fr.Fpu_regs
+#define fpu_dregs f_fpstatus.fpu_fr.Fpu_dregs
+#define fpu_fsr   f_fpstatus.Fpu_fsr
+#define fpu_flags f_fpstatus.Fpu_flags
+#define fpu_extra f_fpstatus.Fpu_extra
+#define fpu_q     f_fpstatus.Fpu_q
+#define fpu_qcnt  f_fpstatus.Fpu_qcnt
+
+struct fpu {
+        struct fp_status f_fpstatus;
+};
+
+#endif /* __SPARC_REG_H */
diff --git a/arch/sparc/include/asm/reg_64.h b/arch/sparc/include/asm/reg_64.h
new file mode 100644
index 000000000000..6f277d7c7d88
--- /dev/null
+++ b/arch/sparc/include/asm/reg_64.h
@@ -0,0 +1,56 @@
+/*
+ * linux/asm/reg.h
+ * Layout of the registers as expected by gdb on the Sparc
+ * we should replace the user.h definitions with those in
+ * this file, we don't even use the other
+ * -miguel
+ *
+ * The names of the structures, constants and aliases in this file
+ * have the same names as the sunos ones, some programs rely on these
+ * names (gdb for example).
+ *
+ */
+
+#ifndef __SPARC64_REG_H
+#define __SPARC64_REG_H
+
+struct regs {
+        unsigned long r_g1;
+        unsigned long r_g2;
+        unsigned long r_g3;
+        unsigned long r_g4;
+        unsigned long r_g5;
+        unsigned long r_g6;
+        unsigned long r_g7;
+        unsigned long r_o0;
+        unsigned long r_o1;
+        unsigned long r_o2;
+        unsigned long r_o3;
+        unsigned long r_o4;
+        unsigned long r_o5;
+        unsigned long r_o6;
+        unsigned long r_o7;
+        unsigned long __pad;
+        unsigned long r_tstate;
+        unsigned long r_tpc;
+        unsigned long r_tnpc;
+        unsigned int  r_y;
+        unsigned int  r_fprs;
+};
+
+#define FPU_REGS_TYPE unsigned int
+#define FPU_FSR_TYPE unsigned long
+
+struct fp_status {
+        unsigned long fpu_fr[32];
+        unsigned long Fpu_fsr;
+};
+
+struct fpu {
+        struct fp_status f_fpstatus;
+};
+
+#define fpu_regs  f_fpstatus.fpu_fr
+#define fpu_fsr   f_fpstatus.Fpu_fsr
+
+#endif /* __SPARC64_REG_H */
diff --git a/include/asm-sparc/resource.h b/arch/sparc/include/asm/resource.h
index fe163cafb4c7..fe163cafb4c7 100644
--- a/include/asm-sparc/resource.h
+++ b/arch/sparc/include/asm/resource.h
diff --git a/include/asm-sparc/ross.h b/arch/sparc/include/asm/ross.h
index ecb6e81786a6..ecb6e81786a6 100644
--- a/include/asm-sparc/ross.h
+++ b/arch/sparc/include/asm/ross.h
diff --git a/include/asm-sparc/rtc.h b/arch/sparc/include/asm/rtc.h
index f9ecb1fe2ecd..f9ecb1fe2ecd 100644
--- a/include/asm-sparc/rtc.h
+++ b/arch/sparc/include/asm/rtc.h
diff --git a/include/asm-sparc/rwsem-const.h b/arch/sparc/include/asm/rwsem-const.h
index a303c9d64d84..a303c9d64d84 100644
--- a/include/asm-sparc/rwsem-const.h
+++ b/arch/sparc/include/asm/rwsem-const.h
diff --git a/include/asm-sparc/rwsem.h b/arch/sparc/include/asm/rwsem.h
index 1dc129ac2feb..1dc129ac2feb 100644
--- a/include/asm-sparc/rwsem.h
+++ b/arch/sparc/include/asm/rwsem.h
diff --git a/include/asm-sparc/sbi.h b/arch/sparc/include/asm/sbi.h
index 5eb7f1965d33..5eb7f1965d33 100644
--- a/include/asm-sparc/sbi.h
+++ b/arch/sparc/include/asm/sbi.h
diff --git a/arch/sparc/include/asm/sbus.h b/arch/sparc/include/asm/sbus.h
new file mode 100644
index 000000000000..f82481ab44db
--- /dev/null
+++ b/arch/sparc/include/asm/sbus.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_SBUS_H
+#define ___ASM_SPARC_SBUS_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/sbus_64.h>
+#else
+#include <asm/sbus_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/sbus_32.h b/arch/sparc/include/asm/sbus_32.h
index 77b5d3aadc99..77b5d3aadc99 100644
--- a/include/asm-sparc/sbus_32.h
+++ b/arch/sparc/include/asm/sbus_32.h
diff --git a/include/asm-sparc/sbus_64.h b/arch/sparc/include/asm/sbus_64.h
index 0e16b6dd7e96..0e16b6dd7e96 100644
--- a/include/asm-sparc/sbus_64.h
+++ b/arch/sparc/include/asm/sbus_64.h
diff --git a/arch/sparc/include/asm/scatterlist.h b/arch/sparc/include/asm/scatterlist.h
new file mode 100644
index 000000000000..ec21a4517641
--- /dev/null
+++ b/arch/sparc/include/asm/scatterlist.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_SCATTERLIST_H
+#define ___ASM_SPARC_SCATTERLIST_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/scatterlist_64.h>
+#else
+#include <asm/scatterlist_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/scatterlist_32.h b/arch/sparc/include/asm/scatterlist_32.h
index c82609ca1d0f..c82609ca1d0f 100644
--- a/include/asm-sparc/scatterlist_32.h
+++ b/arch/sparc/include/asm/scatterlist_32.h
diff --git a/include/asm-sparc/scatterlist_64.h b/arch/sparc/include/asm/scatterlist_64.h
index 81bd058f9382..81bd058f9382 100644
--- a/include/asm-sparc/scatterlist_64.h
+++ b/arch/sparc/include/asm/scatterlist_64.h
diff --git a/include/asm-sparc/scratchpad.h b/arch/sparc/include/asm/scratchpad.h
index 5e8b01fb3343..5e8b01fb3343 100644
--- a/include/asm-sparc/scratchpad.h
+++ b/arch/sparc/include/asm/scratchpad.h
diff --git a/include/asm-sparc/seccomp.h b/arch/sparc/include/asm/seccomp.h
index 7fcd9968192b..7fcd9968192b 100644
--- a/include/asm-sparc/seccomp.h
+++ b/arch/sparc/include/asm/seccomp.h
diff --git a/arch/sparc/include/asm/sections.h b/arch/sparc/include/asm/sections.h
new file mode 100644
index 000000000000..c7c69b00967f
--- /dev/null
+++ b/arch/sparc/include/asm/sections.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_SECTIONS_H
+#define ___ASM_SPARC_SECTIONS_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/sections_64.h>
+#else
+#include <asm/sections_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/sections_32.h b/arch/sparc/include/asm/sections_32.h
index 6832841df051..6832841df051 100644
--- a/include/asm-sparc/sections_32.h
+++ b/arch/sparc/include/asm/sections_32.h
diff --git a/include/asm-sparc/sections_64.h b/arch/sparc/include/asm/sections_64.h
index 3f4b9fdc28d0..3f4b9fdc28d0 100644
--- a/include/asm-sparc/sections_64.h
+++ b/arch/sparc/include/asm/sections_64.h
diff --git a/include/asm-sparc/sembuf.h b/arch/sparc/include/asm/sembuf.h
index faee1be08d67..faee1be08d67 100644
--- a/include/asm-sparc/sembuf.h
+++ b/arch/sparc/include/asm/sembuf.h
diff --git a/include/asm-sparc/setup.h b/arch/sparc/include/asm/setup.h
index 2643c62f4ac0..2643c62f4ac0 100644
--- a/include/asm-sparc/setup.h
+++ b/arch/sparc/include/asm/setup.h
diff --git a/include/asm-sparc/sfafsr.h b/arch/sparc/include/asm/sfafsr.h
index e96137b04a4f..e96137b04a4f 100644
--- a/include/asm-sparc/sfafsr.h
+++ b/arch/sparc/include/asm/sfafsr.h
diff --git a/arch/sparc/include/asm/sfp-machine.h b/arch/sparc/include/asm/sfp-machine.h
new file mode 100644
index 000000000000..4ebc3823ed4f
--- /dev/null
+++ b/arch/sparc/include/asm/sfp-machine.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_SFP_MACHINE_H
+#define ___ASM_SPARC_SFP_MACHINE_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/sfp-machine_64.h>
+#else
+#include <asm/sfp-machine_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/sfp-machine_32.h b/arch/sparc/include/asm/sfp-machine_32.h
index 01d9c3b5a73b..01d9c3b5a73b 100644
--- a/include/asm-sparc/sfp-machine_32.h
+++ b/arch/sparc/include/asm/sfp-machine_32.h
diff --git a/include/asm-sparc/sfp-machine_64.h b/arch/sparc/include/asm/sfp-machine_64.h
index ca913ef40bd5..ca913ef40bd5 100644
--- a/include/asm-sparc/sfp-machine_64.h
+++ b/arch/sparc/include/asm/sfp-machine_64.h
diff --git a/include/asm-sparc/shmbuf.h b/arch/sparc/include/asm/shmbuf.h
index 83a16055363f..83a16055363f 100644
--- a/include/asm-sparc/shmbuf.h
+++ b/arch/sparc/include/asm/shmbuf.h
diff --git a/arch/sparc/include/asm/shmparam.h b/arch/sparc/include/asm/shmparam.h
new file mode 100644
index 000000000000..8bf0cfe0694f
--- /dev/null
+++ b/arch/sparc/include/asm/shmparam.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_SHMPARAM_H
+#define ___ASM_SPARC_SHMPARAM_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/shmparam_64.h>
+#else
+#include <asm/shmparam_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/shmparam_32.h b/arch/sparc/include/asm/shmparam_32.h
index 59a1243c12f3..59a1243c12f3 100644
--- a/include/asm-sparc/shmparam_32.h
+++ b/arch/sparc/include/asm/shmparam_32.h
diff --git a/include/asm-sparc/shmparam_64.h b/arch/sparc/include/asm/shmparam_64.h
index 1ed0d6701a9b..1ed0d6701a9b 100644
--- a/include/asm-sparc/shmparam_64.h
+++ b/arch/sparc/include/asm/shmparam_64.h
diff --git a/arch/sparc/include/asm/sigcontext.h b/arch/sparc/include/asm/sigcontext.h
new file mode 100644
index 000000000000..e92de7e286b5
--- /dev/null
+++ b/arch/sparc/include/asm/sigcontext.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_SIGCONTEXT_H
+#define ___ASM_SPARC_SIGCONTEXT_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/sigcontext_64.h>
+#else
+#include <asm/sigcontext_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/sigcontext_32.h b/arch/sparc/include/asm/sigcontext_32.h
index c5fb60dcbd75..c5fb60dcbd75 100644
--- a/include/asm-sparc/sigcontext_32.h
+++ b/arch/sparc/include/asm/sigcontext_32.h
diff --git a/include/asm-sparc/sigcontext_64.h b/arch/sparc/include/asm/sigcontext_64.h
index 1c868d680cfc..1c868d680cfc 100644
--- a/include/asm-sparc/sigcontext_64.h
+++ b/arch/sparc/include/asm/sigcontext_64.h
diff --git a/arch/sparc/include/asm/siginfo.h b/arch/sparc/include/asm/siginfo.h
new file mode 100644
index 000000000000..bd81f8d7f5ce
--- /dev/null
+++ b/arch/sparc/include/asm/siginfo.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_SIGINFO_H
+#define ___ASM_SPARC_SIGINFO_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/siginfo_64.h>
+#else
+#include <asm/siginfo_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/siginfo_32.h b/arch/sparc/include/asm/siginfo_32.h
index 3c71af135c52..3c71af135c52 100644
--- a/include/asm-sparc/siginfo_32.h
+++ b/arch/sparc/include/asm/siginfo_32.h
diff --git a/include/asm-sparc/siginfo_64.h b/arch/sparc/include/asm/siginfo_64.h
index c96e6c30f8b0..c96e6c30f8b0 100644
--- a/include/asm-sparc/siginfo_64.h
+++ b/arch/sparc/include/asm/siginfo_64.h
diff --git a/arch/sparc/include/asm/signal.h b/arch/sparc/include/asm/signal.h
new file mode 100644
index 000000000000..27ab05dc203e
--- /dev/null
+++ b/arch/sparc/include/asm/signal.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_SIGNAL_H
+#define ___ASM_SPARC_SIGNAL_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/signal_64.h>
+#else
+#include <asm/signal_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/signal_32.h b/arch/sparc/include/asm/signal_32.h
index 96a60ab03ca1..96a60ab03ca1 100644
--- a/include/asm-sparc/signal_32.h
+++ b/arch/sparc/include/asm/signal_32.h
diff --git a/include/asm-sparc/signal_64.h b/arch/sparc/include/asm/signal_64.h
index ab1509a101c5..ab1509a101c5 100644
--- a/include/asm-sparc/signal_64.h
+++ b/arch/sparc/include/asm/signal_64.h
diff --git a/arch/sparc/include/asm/smp.h b/arch/sparc/include/asm/smp.h
new file mode 100644
index 000000000000..b59672d0e19b
--- /dev/null
+++ b/arch/sparc/include/asm/smp.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_SMP_H
+#define ___ASM_SPARC_SMP_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/smp_64.h>
+#else
+#include <asm/smp_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/smp_32.h b/arch/sparc/include/asm/smp_32.h
index 7201752cf934..7201752cf934 100644
--- a/include/asm-sparc/smp_32.h
+++ b/arch/sparc/include/asm/smp_32.h
diff --git a/include/asm-sparc/smp_64.h b/arch/sparc/include/asm/smp_64.h
index 57224dd37b3a..57224dd37b3a 100644
--- a/include/asm-sparc/smp_64.h
+++ b/arch/sparc/include/asm/smp_64.h
diff --git a/include/asm-sparc/smpprim.h b/arch/sparc/include/asm/smpprim.h
index eb849d862c64..eb849d862c64 100644
--- a/include/asm-sparc/smpprim.h
+++ b/arch/sparc/include/asm/smpprim.h
diff --git a/include/asm-sparc/socket.h b/arch/sparc/include/asm/socket.h
index bf50d0c2d583..bf50d0c2d583 100644
--- a/include/asm-sparc/socket.h
+++ b/arch/sparc/include/asm/socket.h
diff --git a/include/asm-sparc/sockios.h b/arch/sparc/include/asm/sockios.h
index 990ea746486b..990ea746486b 100644
--- a/include/asm-sparc/sockios.h
+++ b/arch/sparc/include/asm/sockios.h
diff --git a/include/asm-sparc/sparsemem.h b/arch/sparc/include/asm/sparsemem.h
index b99d4e4b6d28..b99d4e4b6d28 100644
--- a/include/asm-sparc/sparsemem.h
+++ b/arch/sparc/include/asm/sparsemem.h
diff --git a/arch/sparc/include/asm/spinlock.h b/arch/sparc/include/asm/spinlock.h
new file mode 100644
index 000000000000..f276b0036b2c
--- /dev/null
+++ b/arch/sparc/include/asm/spinlock.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_SPINLOCK_H
+#define ___ASM_SPARC_SPINLOCK_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/spinlock_64.h>
+#else
+#include <asm/spinlock_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/spinlock_32.h b/arch/sparc/include/asm/spinlock_32.h
index de2249b267c6..de2249b267c6 100644
--- a/include/asm-sparc/spinlock_32.h
+++ b/arch/sparc/include/asm/spinlock_32.h
diff --git a/include/asm-sparc/spinlock_64.h b/arch/sparc/include/asm/spinlock_64.h
index 0006fe9f8c7a..0006fe9f8c7a 100644
--- a/include/asm-sparc/spinlock_64.h
+++ b/arch/sparc/include/asm/spinlock_64.h
diff --git a/include/asm-sparc/spinlock_types.h b/arch/sparc/include/asm/spinlock_types.h
index 37cbe01c585b..37cbe01c585b 100644
--- a/include/asm-sparc/spinlock_types.h
+++ b/arch/sparc/include/asm/spinlock_types.h
diff --git a/include/asm-sparc/spitfire.h b/arch/sparc/include/asm/spitfire.h
index 985ea7e31992..985ea7e31992 100644
--- a/include/asm-sparc/spitfire.h
+++ b/arch/sparc/include/asm/spitfire.h
diff --git a/include/asm-sparc/sstate.h b/arch/sparc/include/asm/sstate.h
index a7c35dbcb281..a7c35dbcb281 100644
--- a/include/asm-sparc/sstate.h
+++ b/arch/sparc/include/asm/sstate.h
diff --git a/include/asm-sparc/stacktrace.h b/arch/sparc/include/asm/stacktrace.h
index 6cee39adf6d6..6cee39adf6d6 100644
--- a/include/asm-sparc/stacktrace.h
+++ b/arch/sparc/include/asm/stacktrace.h
diff --git a/include/asm-sparc/starfire.h b/arch/sparc/include/asm/starfire.h
index 07bafd31e33c..07bafd31e33c 100644
--- a/include/asm-sparc/starfire.h
+++ b/arch/sparc/include/asm/starfire.h
diff --git a/arch/sparc/include/asm/stat.h b/arch/sparc/include/asm/stat.h
new file mode 100644
index 000000000000..d8153013df72
--- /dev/null
+++ b/arch/sparc/include/asm/stat.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_STAT_H
+#define ___ASM_SPARC_STAT_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/stat_64.h>
+#else
+#include <asm/stat_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/stat_32.h b/arch/sparc/include/asm/stat_32.h
index 2299e1d5d94c..2299e1d5d94c 100644
--- a/include/asm-sparc/stat_32.h
+++ b/arch/sparc/include/asm/stat_32.h
diff --git a/include/asm-sparc/stat_64.h b/arch/sparc/include/asm/stat_64.h
index 9650fdea847f..9650fdea847f 100644
--- a/include/asm-sparc/stat_64.h
+++ b/arch/sparc/include/asm/stat_64.h
diff --git a/arch/sparc/include/asm/statfs.h b/arch/sparc/include/asm/statfs.h
new file mode 100644
index 000000000000..5e937a73743d
--- /dev/null
+++ b/arch/sparc/include/asm/statfs.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_STATFS_H
+#define ___ASM_SPARC_STATFS_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/statfs_64.h>
+#else
+#include <asm/statfs_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/statfs_32.h b/arch/sparc/include/asm/statfs_32.h
index 304520fa8863..304520fa8863 100644
--- a/include/asm-sparc/statfs_32.h
+++ b/arch/sparc/include/asm/statfs_32.h
diff --git a/include/asm-sparc/statfs_64.h b/arch/sparc/include/asm/statfs_64.h
index 79b3c890a5fa..79b3c890a5fa 100644
--- a/include/asm-sparc/statfs_64.h
+++ b/arch/sparc/include/asm/statfs_64.h
diff --git a/arch/sparc/include/asm/string.h b/arch/sparc/include/asm/string.h
new file mode 100644
index 000000000000..98b72a0c8e6e
--- /dev/null
+++ b/arch/sparc/include/asm/string.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_STRING_H
+#define ___ASM_SPARC_STRING_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/string_64.h>
+#else
+#include <asm/string_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/string_32.h b/arch/sparc/include/asm/string_32.h
index 6c5fddb7e6b5..6c5fddb7e6b5 100644
--- a/include/asm-sparc/string_32.h
+++ b/arch/sparc/include/asm/string_32.h
diff --git a/include/asm-sparc/string_64.h b/arch/sparc/include/asm/string_64.h
index 43161f2d17eb..43161f2d17eb 100644
--- a/include/asm-sparc/string_64.h
+++ b/arch/sparc/include/asm/string_64.h
diff --git a/include/asm-sparc/sun4paddr.h b/arch/sparc/include/asm/sun4paddr.h
index d52985f19f42..d52985f19f42 100644
--- a/include/asm-sparc/sun4paddr.h
+++ b/arch/sparc/include/asm/sun4paddr.h
diff --git a/include/asm-sparc/sun4prom.h b/arch/sparc/include/asm/sun4prom.h
index 9c8b4cbf629a..9c8b4cbf629a 100644
--- a/include/asm-sparc/sun4prom.h
+++ b/arch/sparc/include/asm/sun4prom.h
diff --git a/arch/sparc/include/asm/sunbpp.h b/arch/sparc/include/asm/sunbpp.h
new file mode 100644
index 000000000000..d81a02eaf78b
--- /dev/null
+++ b/arch/sparc/include/asm/sunbpp.h
@@ -0,0 +1,80 @@
+/*
+ * include/asm/sunbpp.h
+ */
+
+#ifndef _ASM_SPARC_SUNBPP_H
+#define _ASM_SPARC_SUNBPP_H
+
+struct bpp_regs {
+  /* DMA registers */
+  __volatile__ __u32 p_csr;             /* DMA Control/Status Register */
+  __volatile__ __u32 p_addr;            /* Address Register */
+  __volatile__ __u32 p_bcnt;            /* Byte Count Register */
+  __volatile__ __u32 p_tst_csr;         /* Test Control/Status (DMA2 only) */
+  /* Parallel Port registers */
+  __volatile__ __u16 p_hcr;             /* Hardware Configuration Register */
+  __volatile__ __u16 p_ocr;             /* Operation Configuration Register */
+  __volatile__ __u8 p_dr;               /* Parallel Data Register */
+  __volatile__ __u8 p_tcr;              /* Transfer Control Register */
+  __volatile__ __u8 p_or;               /* Output Register */
+  __volatile__ __u8 p_ir;               /* Input Register */
+  __volatile__ __u16 p_icr;             /* Interrupt Control Register */
+};
+
+/* P_HCR. Time is in increments of SBus clock. */
+#define P_HCR_TEST      0x8000      /* Allows buried counters to be read */
+#define P_HCR_DSW       0x7f00      /* Data strobe width (in ticks) */
+#define P_HCR_DDS       0x007f      /* Data setup before strobe (in ticks) */
+
+/* P_OCR. */
+#define P_OCR_MEM_CLR   0x8000
+#define P_OCR_DATA_SRC  0x4000      /* )                  */
+#define P_OCR_DS_DSEL   0x2000      /* )  Bidirectional      */
+#define P_OCR_BUSY_DSEL 0x1000      /* )    selects            */
+#define P_OCR_ACK_DSEL  0x0800      /* )                  */
+#define P_OCR_EN_DIAG   0x0400
+#define P_OCR_BUSY_OP   0x0200      /* Busy operation */
+#define P_OCR_ACK_OP    0x0100      /* Ack operation */
+#define P_OCR_SRST      0x0080      /* Reset state machines. Not selfcleaning. */
+#define P_OCR_IDLE      0x0008      /* PP data transfer state machine is idle */
+#define P_OCR_V_ILCK    0x0002      /* Versatec faded. Zebra only. */
+#define P_OCR_EN_VER    0x0001      /* Enable Versatec (0 - enable). Zebra only. */
+
+/* P_TCR */
+#define P_TCR_DIR       0x08
+#define P_TCR_BUSY      0x04
+#define P_TCR_ACK       0x02
+#define P_TCR_DS        0x01        /* Strobe */
+
+/* P_OR */
+#define P_OR_V3         0x20        /* )                 */
+#define P_OR_V2         0x10        /* ) on Zebra only   */
+#define P_OR_V1         0x08        /* )                 */
+#define P_OR_INIT       0x04
+#define P_OR_AFXN       0x02        /* Auto Feed */
+#define P_OR_SLCT_IN    0x01
+
+/* P_IR */
+#define P_IR_PE         0x04
+#define P_IR_SLCT       0x02
+#define P_IR_ERR        0x01
+
+/* P_ICR */
+#define P_DS_IRQ        0x8000      /* RW1  */
+#define P_ACK_IRQ       0x4000      /* RW1  */
+#define P_BUSY_IRQ      0x2000      /* RW1  */
+#define P_PE_IRQ        0x1000      /* RW1  */
+#define P_SLCT_IRQ      0x0800      /* RW1  */
+#define P_ERR_IRQ       0x0400      /* RW1  */
+#define P_DS_IRQ_EN     0x0200      /* RW   Always on rising edge */
+#define P_ACK_IRQ_EN    0x0100      /* RW   Always on rising edge */
+#define P_BUSY_IRP      0x0080      /* RW   1= rising edge */
+#define P_BUSY_IRQ_EN   0x0040      /* RW   */
+#define P_PE_IRP        0x0020      /* RW   1= rising edge */
+#define P_PE_IRQ_EN     0x0010      /* RW   */
+#define P_SLCT_IRP      0x0008      /* RW   1= rising edge */
+#define P_SLCT_IRQ_EN   0x0004      /* RW   */
+#define P_ERR_IRP       0x0002      /* RW1  1= rising edge */
+#define P_ERR_IRQ_EN    0x0001      /* RW   */
+
+#endif /* !(_ASM_SPARC_SUNBPP_H) */
diff --git a/include/asm-sparc/swift.h b/arch/sparc/include/asm/swift.h
index e535061bf755..e535061bf755 100644
--- a/include/asm-sparc/swift.h
+++ b/arch/sparc/include/asm/swift.h
diff --git a/arch/sparc/include/asm/syscall.h b/arch/sparc/include/asm/syscall.h
new file mode 100644
index 000000000000..7486c605e23c
--- /dev/null
+++ b/arch/sparc/include/asm/syscall.h
@@ -0,0 +1,120 @@
+#ifndef __ASM_SPARC_SYSCALL_H
+#define __ASM_SPARC_SYSCALL_H
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <asm/ptrace.h>
+
+/* The system call number is given by the user in %g1 */
+static inline long syscall_get_nr(struct task_struct *task,
+                                  struct pt_regs *regs)
+{
+        int syscall_p = pt_regs_is_syscall(regs);
+
+        return (syscall_p ? regs->u_regs[UREG_G1] : -1L);
+}
+
+static inline void syscall_rollback(struct task_struct *task,
+                                    struct pt_regs *regs)
+{
+        /* XXX This needs some thought.  On Sparc we don't
+         * XXX save away the original %o0 value somewhere.
+         * XXX Instead we hold it in register %l5 at the top
+         * XXX level trap frame and pass this down to the signal
+         * XXX dispatch code which is the only place that value
+         * XXX ever was needed.
+         */
+}
+
+#ifdef CONFIG_SPARC32
+static inline bool syscall_has_error(struct pt_regs *regs)
+{
+        return (regs->psr & PSR_C) ? true : false;
+}
+static inline void syscall_set_error(struct pt_regs *regs)
+{
+        regs->psr |= PSR_C;
+}
+static inline void syscall_clear_error(struct pt_regs *regs)
+{
+        regs->psr &= ~PSR_C;
+}
+#else
+static inline bool syscall_has_error(struct pt_regs *regs)
+{
+        return (regs->tstate & (TSTATE_XCARRY | TSTATE_ICARRY)) ? true : false;
+}
+static inline void syscall_set_error(struct pt_regs *regs)
+{
+        regs->tstate |= (TSTATE_XCARRY | TSTATE_ICARRY);
+}
+static inline void syscall_clear_error(struct pt_regs *regs)
+{
+        regs->tstate &= ~(TSTATE_XCARRY | TSTATE_ICARRY);
+}
+#endif
+
+static inline long syscall_get_error(struct task_struct *task,
+                                     struct pt_regs *regs)
+{
+        long val = regs->u_regs[UREG_I0];
+
+        return (syscall_has_error(regs) ? -val : 0);
+}
+
+static inline long syscall_get_return_value(struct task_struct *task,
+                                            struct pt_regs *regs)
+{
+        long val = regs->u_regs[UREG_I0];
+
+        return val;
+}
+
+static inline void syscall_set_return_value(struct task_struct *task,
+                                            struct pt_regs *regs,
+                                            int error, long val)
+{
+        if (error) {
+                syscall_set_error(regs);
+                regs->u_regs[UREG_I0] = -error;
+        } else {
+                syscall_clear_error(regs);
+                regs->u_regs[UREG_I0] = val;
+        }
+}
+
+static inline void syscall_get_arguments(struct task_struct *task,
+                                         struct pt_regs *regs,
+                                         unsigned int i, unsigned int n,
+                                         unsigned long *args)
+{
+        int zero_extend = 0;
+        unsigned int j;
+
+#ifdef CONFIG_SPARC64
+        if (test_tsk_thread_flag(task, TIF_32BIT))
+                zero_extend = 1;
+#endif
+
+        for (j = 0; j < n; j++) {
+                unsigned long val = regs->u_regs[UREG_I0 + i + j];
+
+                if (zero_extend)
+                        args[j] = (u32) val;
+                else
+                        args[j] = val;
+        }
+}
+
+static inline void syscall_set_arguments(struct task_struct *task,
+                                         struct pt_regs *regs,
+                                         unsigned int i, unsigned int n,
+                                         const unsigned long *args)
+{
+        unsigned int j;
+
+        for (j = 0; j < n; j++)
+                regs->u_regs[UREG_I0 + i + j] = args[j];
+}
+
+#endif /* __ASM_SPARC_SYSCALL_H */
diff --git a/include/asm-sparc/syscalls.h b/arch/sparc/include/asm/syscalls.h
index 45a43f637a14..45a43f637a14 100644
--- a/include/asm-sparc/syscalls.h
+++ b/arch/sparc/include/asm/syscalls.h
diff --git a/include/asm-sparc/sysen.h b/arch/sparc/include/asm/sysen.h
index 6af34abde6e7..6af34abde6e7 100644
--- a/include/asm-sparc/sysen.h
+++ b/arch/sparc/include/asm/sysen.h
diff --git a/arch/sparc/include/asm/system.h b/arch/sparc/include/asm/system.h
new file mode 100644
index 000000000000..7944a7cfc996
--- /dev/null
+++ b/arch/sparc/include/asm/system.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_SYSTEM_H
+#define ___ASM_SPARC_SYSTEM_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/system_64.h>
+#else
+#include <asm/system_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/system_32.h b/arch/sparc/include/asm/system_32.h
index b4b024445fc9..b4b024445fc9 100644
--- a/include/asm-sparc/system_32.h
+++ b/arch/sparc/include/asm/system_32.h
diff --git a/include/asm-sparc/system_64.h b/arch/sparc/include/asm/system_64.h
index db9e742a406a..db9e742a406a 100644
--- a/include/asm-sparc/system_64.h
+++ b/arch/sparc/include/asm/system_64.h
diff --git a/include/asm-sparc/termbits.h b/arch/sparc/include/asm/termbits.h
index d6ca3e2754f5..d6ca3e2754f5 100644
--- a/include/asm-sparc/termbits.h
+++ b/arch/sparc/include/asm/termbits.h
diff --git a/include/asm-sparc/termios.h b/arch/sparc/include/asm/termios.h
index e8ba95399643..e8ba95399643 100644
--- a/include/asm-sparc/termios.h
+++ b/arch/sparc/include/asm/termios.h
diff --git a/arch/sparc/include/asm/thread_info.h b/arch/sparc/include/asm/thread_info.h
new file mode 100644
index 000000000000..122d7acc07e6
--- /dev/null
+++ b/arch/sparc/include/asm/thread_info.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_THREAD_INFO_H
+#define ___ASM_SPARC_THREAD_INFO_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/thread_info_64.h>
+#else
+#include <asm/thread_info_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/thread_info_32.h b/arch/sparc/include/asm/thread_info_32.h
new file mode 100644
index 000000000000..cbb892d0dff0
--- /dev/null
+++ b/arch/sparc/include/asm/thread_info_32.h
@@ -0,0 +1,158 @@
+/*
+ * thread_info.h: sparc low-level thread information
+ * adapted from the ppc version by Pete Zaitcev, which was
+ * adapted from the i386 version by Paul Mackerras
+ *
+ * Copyright (C) 2002  David Howells (dhowells@redhat.com)
+ * Copyright (c) 2002  Pete Zaitcev (zaitcev@yahoo.com)
+ * - Incorporating suggestions made by Linus Torvalds and Dave Miller
+ */
+
+#ifndef _ASM_THREAD_INFO_H
+#define _ASM_THREAD_INFO_H
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+
+#include <asm/btfixup.h>
+#include <asm/ptrace.h>
+#include <asm/page.h>
+
+/*
+ * Low level task data.
+ *
+ * If you change this, change the TI_* offsets below to match.
+ */
+#define NSWINS 8
+struct thread_info {
+        unsigned long           uwinmask;
+        struct task_struct      *task;          /* main task structure */
+        struct exec_domain      *exec_domain;   /* execution domain */
+        unsigned long           flags;          /* low level flags */
+        int                     cpu;            /* cpu we're on */
+        int                     preempt_count;  /* 0 => preemptable,
+                                                   <0 => BUG */
+        int                     softirq_count;
+        int                     hardirq_count;
+
+        /* Context switch saved kernel state. */
+        unsigned long ksp;      /* ... ksp __attribute__ ((aligned (8))); */
+        unsigned long kpc;
+        unsigned long kpsr;
+        unsigned long kwim;
+
+        /* A place to store user windows and stack pointers
+         * when the stack needs inspection.
+         */
+        struct reg_window       reg_window[NSWINS];     /* align for ldd! */
+        unsigned long           rwbuf_stkptrs[NSWINS];
+        unsigned long           w_saved;
+
+        struct restart_block    restart_block;
+};
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ *
+ * preempt_count needs to be 1 initially, until the scheduler is functional.
+ */
+#define INIT_THREAD_INFO(tsk)                           \
+{                                                       \
+        .uwinmask       =       0,                      \
+        .task           =       &tsk,                   \
+        .exec_domain    =       &default_exec_domain,   \
+        .flags          =       0,                      \
+        .cpu            =       0,                      \
+        .preempt_count  =       1,                      \
+        .restart_block  = {                             \
+                .fn     =       do_no_restart_syscall,  \
+        },                                              \
+}
+
+#define init_thread_info        (init_thread_union.thread_info)
+#define init_stack              (init_thread_union.stack)
+
+/* how to get the thread information struct from C */
+register struct thread_info *current_thread_info_reg asm("g6");
+#define current_thread_info()   (current_thread_info_reg)
+
+/*
+ * thread information allocation
+ */
+#if PAGE_SHIFT == 13
+#define THREAD_INFO_ORDER  0
+#else /* PAGE_SHIFT */
+#define THREAD_INFO_ORDER  1
+#endif
+
+#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+
+BTFIXUPDEF_CALL(struct thread_info *, alloc_thread_info, void)
+#define alloc_thread_info(tsk) BTFIXUP_CALL(alloc_thread_info)()
+
+BTFIXUPDEF_CALL(void, free_thread_info, struct thread_info *)
+#define free_thread_info(ti) BTFIXUP_CALL(free_thread_info)(ti)
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * Size of kernel stack for each process.
+ * Observe the order of get_free_pages() in alloc_thread_info().
+ * The sun4 has 8K stack too, because it's short on memory, and 16K is a waste.
+ */
+#define THREAD_SIZE             8192
+
+/*
+ * Offsets in thread_info structure, used in assembly code
+ * The "#define REGWIN_SZ 0x40" was abolished, so no multiplications.
+ */
+#define TI_UWINMASK     0x00    /* uwinmask */
+#define TI_TASK         0x04
+#define TI_EXECDOMAIN   0x08    /* exec_domain */
+#define TI_FLAGS        0x0c
+#define TI_CPU          0x10
+#define TI_PREEMPT      0x14    /* preempt_count */
+#define TI_SOFTIRQ      0x18    /* softirq_count */
+#define TI_HARDIRQ      0x1c    /* hardirq_count */
+#define TI_KSP          0x20    /* ksp */
+#define TI_KPC          0x24    /* kpc (ldd'ed with kpc) */
+#define TI_KPSR         0x28    /* kpsr */
+#define TI_KWIM         0x2c    /* kwim (ldd'ed with kpsr) */
+#define TI_REG_WINDOW   0x30
+#define TI_RWIN_SPTRS   0x230
+#define TI_W_SAVED      0x250
+/* #define TI_RESTART_BLOCK 0x25n */ /* Nobody cares */
+
+#define PREEMPT_ACTIVE          0x4000000
+
+/*
+ * thread information flag bit numbers
+ */
+#define TIF_SYSCALL_TRACE       0       /* syscall trace active */
+#define TIF_NOTIFY_RESUME       1       /* callback before returning to user */
+#define TIF_SIGPENDING          2       /* signal pending */
+#define TIF_NEED_RESCHED        3       /* rescheduling necessary */
+#define TIF_RESTORE_SIGMASK     4       /* restore signal mask in do_signal() */
+#define TIF_USEDFPU             8       /* FPU was used by this task
+                                         * this quantum (SMP) */
+#define TIF_POLLING_NRFLAG      9       /* true if poll_idle() is polling
+                                         * TIF_NEED_RESCHED */
+#define TIF_MEMDIE              10
+
+/* as above, but as bit values */
+#define _TIF_SYSCALL_TRACE      (1<<TIF_SYSCALL_TRACE)
+#define _TIF_NOTIFY_RESUME      (1<<TIF_NOTIFY_RESUME)
+#define _TIF_SIGPENDING         (1<<TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED       (1<<TIF_NEED_RESCHED)
+#define _TIF_RESTORE_SIGMASK    (1<<TIF_RESTORE_SIGMASK)
+#define _TIF_USEDFPU            (1<<TIF_USEDFPU)
+#define _TIF_POLLING_NRFLAG     (1<<TIF_POLLING_NRFLAG)
+
+#define _TIF_DO_NOTIFY_RESUME_MASK      (_TIF_NOTIFY_RESUME | \
+                                         _TIF_SIGPENDING | \
+                                         _TIF_RESTORE_SIGMASK)
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_THREAD_INFO_H */
diff --git a/arch/sparc/include/asm/thread_info_64.h b/arch/sparc/include/asm/thread_info_64.h
new file mode 100644
index 000000000000..c0a737d7292c
--- /dev/null
+++ b/arch/sparc/include/asm/thread_info_64.h
@@ -0,0 +1,281 @@
+/* thread_info.h: sparc64 low-level thread information
+ *
+ * Copyright (C) 2002  David S. Miller (davem@redhat.com)
+ */
+
+#ifndef _ASM_THREAD_INFO_H
+#define _ASM_THREAD_INFO_H
+
+#ifdef __KERNEL__
+
+#define NSWINS          7
+
+#define TI_FLAG_BYTE_FAULT_CODE         0
+#define TI_FLAG_FAULT_CODE_SHIFT        56
+#define TI_FLAG_BYTE_WSTATE             1
+#define TI_FLAG_WSTATE_SHIFT            48
+#define TI_FLAG_BYTE_CWP                2
+#define TI_FLAG_CWP_SHIFT               40
+#define TI_FLAG_BYTE_CURRENT_DS         3
+#define TI_FLAG_CURRENT_DS_SHIFT        32
+#define TI_FLAG_BYTE_FPDEPTH            4
+#define TI_FLAG_FPDEPTH_SHIFT           24
+#define TI_FLAG_BYTE_WSAVED             5
+#define TI_FLAG_WSAVED_SHIFT            16
+
+#include <asm/page.h>
+
+#ifndef __ASSEMBLY__
+
+#include <asm/ptrace.h>
+#include <asm/types.h>
+
+struct task_struct;
+struct exec_domain;
+
+struct thread_info {
+        /* D$ line 1 */
+        struct task_struct      *task;
+        unsigned long           flags;
+        __u8                    fpsaved[7];
+        __u8                    status;
+        unsigned long           ksp;
+
+        /* D$ line 2 */
+        unsigned long           fault_address;
+        struct pt_regs          *kregs;
+        struct exec_domain      *exec_domain;
+        int                     preempt_count;  /* 0 => preemptable, <0 => BUG */
+        __u8                    new_child;
+        __u8                    syscall_noerror;
+        __u16                   cpu;
+
+        unsigned long           *utraps;
+
+        struct reg_window       reg_window[NSWINS];
+        unsigned long           rwbuf_stkptrs[NSWINS];
+
+        unsigned long           gsr[7];
+        unsigned long           xfsr[7];
+
+        __u64                   __user *user_cntd0;
+        __u64                   __user *user_cntd1;
+        __u64                   kernel_cntd0, kernel_cntd1;
+        __u64                   pcr_reg;
+
+        struct restart_block    restart_block;
+
+        struct pt_regs          *kern_una_regs;
+        unsigned int            kern_una_insn;
+
+        unsigned long           fpregs[0] __attribute__ ((aligned(64)));
+};
+
+#endif /* !(__ASSEMBLY__) */
+
+/* offsets into the thread_info struct for assembly code access */
+#define TI_TASK         0x00000000
+#define TI_FLAGS        0x00000008
+#define TI_FAULT_CODE   (TI_FLAGS + TI_FLAG_BYTE_FAULT_CODE)
+#define TI_WSTATE       (TI_FLAGS + TI_FLAG_BYTE_WSTATE)
+#define TI_CWP          (TI_FLAGS + TI_FLAG_BYTE_CWP)
+#define TI_CURRENT_DS   (TI_FLAGS + TI_FLAG_BYTE_CURRENT_DS)
+#define TI_FPDEPTH      (TI_FLAGS + TI_FLAG_BYTE_FPDEPTH)
+#define TI_WSAVED       (TI_FLAGS + TI_FLAG_BYTE_WSAVED)
+#define TI_FPSAVED      0x00000010
+#define TI_KSP          0x00000018
+#define TI_FAULT_ADDR   0x00000020
+#define TI_KREGS        0x00000028
+#define TI_EXEC_DOMAIN  0x00000030
+#define TI_PRE_COUNT    0x00000038
+#define TI_NEW_CHILD    0x0000003c
+#define TI_SYS_NOERROR  0x0000003d
+#define TI_CPU          0x0000003e
+#define TI_UTRAPS       0x00000040
+#define TI_REG_WINDOW   0x00000048
+#define TI_RWIN_SPTRS   0x000003c8
+#define TI_GSR          0x00000400
+#define TI_XFSR         0x00000438
+#define TI_USER_CNTD0   0x00000470
+#define TI_USER_CNTD1   0x00000478
+#define TI_KERN_CNTD0   0x00000480
+#define TI_KERN_CNTD1   0x00000488
+#define TI_PCR          0x00000490
+#define TI_RESTART_BLOCK 0x00000498
+#define TI_KUNA_REGS    0x000004c0
+#define TI_KUNA_INSN    0x000004c8
+#define TI_FPREGS       0x00000500
+
+/* We embed this in the uppermost byte of thread_info->flags */
+#define FAULT_CODE_WRITE        0x01    /* Write access, implies D-TLB     */
+#define FAULT_CODE_DTLB         0x02    /* Miss happened in D-TLB          */
+#define FAULT_CODE_ITLB         0x04    /* Miss happened in I-TLB          */
+#define FAULT_CODE_WINFIXUP     0x08    /* Miss happened during spill/fill */
+#define FAULT_CODE_BLKCOMMIT    0x10    /* Use blk-commit ASI in copy_page */
+
+#if PAGE_SHIFT == 13
+#define THREAD_SIZE (2*PAGE_SIZE)
+#define THREAD_SHIFT (PAGE_SHIFT + 1)
+#else /* PAGE_SHIFT == 13 */
+#define THREAD_SIZE PAGE_SIZE
+#define THREAD_SHIFT PAGE_SHIFT
+#endif /* PAGE_SHIFT == 13 */
+
+#define PREEMPT_ACTIVE          0x4000000
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ *
+ * preempt_count needs to be 1 initially, until the scheduler is functional.
+ */
+#ifndef __ASSEMBLY__
+
+#define INIT_THREAD_INFO(tsk)                           \
+{                                                       \
+        .task           =       &tsk,                   \
+        .flags          = ((unsigned long)ASI_P) << TI_FLAG_CURRENT_DS_SHIFT,   \
+        .exec_domain    =       &default_exec_domain,   \
+        .preempt_count  =       1,                      \
+        .restart_block  = {                             \
+                .fn     =       do_no_restart_syscall,  \
+        },                                              \
+}
+
+#define init_thread_info        (init_thread_union.thread_info)
+#define init_stack              (init_thread_union.stack)
+
+/* how to get the thread information struct from C */
+register struct thread_info *current_thread_info_reg asm("g6");
+#define current_thread_info()   (current_thread_info_reg)
+
+/* thread information allocation */
+#if PAGE_SHIFT == 13
+#define __THREAD_INFO_ORDER     1
+#else /* PAGE_SHIFT == 13 */
+#define __THREAD_INFO_ORDER     0
+#endif /* PAGE_SHIFT == 13 */
+
+#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+
+#ifdef CONFIG_DEBUG_STACK_USAGE
+#define alloc_thread_info(tsk)                                  \
+({                                                              \
+        struct thread_info *ret;                                \
+                                                                \
+        ret = (struct thread_info *)                            \
+          __get_free_pages(GFP_KERNEL, __THREAD_INFO_ORDER);    \
+        if (ret)                                                \
+                memset(ret, 0, PAGE_SIZE<<__THREAD_INFO_ORDER); \
+        ret;                                                    \
+})
+#else
+#define alloc_thread_info(tsk) \
+        ((struct thread_info *)__get_free_pages(GFP_KERNEL, __THREAD_INFO_ORDER))
+#endif
+
+#define free_thread_info(ti) \
+        free_pages((unsigned long)(ti),__THREAD_INFO_ORDER)
+
+#define __thread_flag_byte_ptr(ti)      \
+        ((unsigned char *)(&((ti)->flags)))
+#define __cur_thread_flag_byte_ptr      __thread_flag_byte_ptr(current_thread_info())
+
+#define get_thread_fault_code()         (__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_FAULT_CODE])
+#define set_thread_fault_code(val)      (__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_FAULT_CODE] = (val))
+#define get_thread_wstate()             (__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_WSTATE])
+#define set_thread_wstate(val)          (__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_WSTATE] = (val))
+#define get_thread_cwp()                (__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_CWP])
+#define set_thread_cwp(val)             (__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_CWP] = (val))
+#define get_thread_current_ds()         (__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_CURRENT_DS])
+#define set_thread_current_ds(val)      (__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_CURRENT_DS] = (val))
+#define get_thread_fpdepth()            (__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_FPDEPTH])
+#define set_thread_fpdepth(val)         (__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_FPDEPTH] = (val))
+#define get_thread_wsaved()             (__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_WSAVED])
+#define set_thread_wsaved(val)          (__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_WSAVED] = (val))
+
+#endif /* !(__ASSEMBLY__) */
+
+/*
+ * Thread information flags, only 16 bits are available as we encode
+ * other values into the upper 6 bytes.
+ *
+ * On trap return we need to test several values:
+ *
+ * user:        need_resched, notify_resume, sigpending, wsaved, perfctr
+ * kernel:      fpdepth
+ *
+ * So to check for work in the kernel case we simply load the fpdepth
+ * byte out of the flags and test it.  For the user case we encode the
+ * lower 3 bytes of flags as follows:
+ *      ----------------------------------------
+ *      | wsaved | flags byte 1 | flags byte 2 |
+ *      ----------------------------------------
+ * This optimizes the user test into:
+ *      ldx             [%g6 + TI_FLAGS], REG1
+ *      sethi           %hi(_TIF_USER_WORK_MASK), REG2
+ *      or              REG2, %lo(_TIF_USER_WORK_MASK), REG2
+ *      andcc           REG1, REG2, %g0
+ *      be,pt           no_work_to_do
+ *       nop
+ */
+#define TIF_SYSCALL_TRACE       0       /* syscall trace active */
+#define TIF_NOTIFY_RESUME       1       /* callback before returning to user */
+#define TIF_SIGPENDING          2       /* signal pending */
+#define TIF_NEED_RESCHED        3       /* rescheduling necessary */
+#define TIF_PERFCTR             4       /* performance counters active */
+#define TIF_UNALIGNED           5       /* allowed to do unaligned accesses */
+/* flag bit 6 is available */
+#define TIF_32BIT               7       /* 32-bit binary */
+/* flag bit 8 is available */
+#define TIF_SECCOMP             9       /* secure computing */
+#define TIF_SYSCALL_AUDIT       10      /* syscall auditing active */
+/* flag bit 11 is available */
+/* NOTE: Thread flags >= 12 should be ones we have no interest
+ *       in using in assembly, else we can't use the mask as
+ *       an immediate value in instructions such as andcc.
+ */
+#define TIF_ABI_PENDING         12
+#define TIF_MEMDIE              13
+#define TIF_POLLING_NRFLAG      14
+
+#define _TIF_SYSCALL_TRACE      (1<<TIF_SYSCALL_TRACE)
+#define _TIF_NOTIFY_RESUME      (1<<TIF_NOTIFY_RESUME)
+#define _TIF_SIGPENDING         (1<<TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED       (1<<TIF_NEED_RESCHED)
+#define _TIF_PERFCTR            (1<<TIF_PERFCTR)
+#define _TIF_UNALIGNED          (1<<TIF_UNALIGNED)
+#define _TIF_32BIT              (1<<TIF_32BIT)
+#define _TIF_SECCOMP            (1<<TIF_SECCOMP)
+#define _TIF_SYSCALL_AUDIT      (1<<TIF_SYSCALL_AUDIT)
+#define _TIF_ABI_PENDING        (1<<TIF_ABI_PENDING)
+#define _TIF_POLLING_NRFLAG     (1<<TIF_POLLING_NRFLAG)
+
+#define _TIF_USER_WORK_MASK     ((0xff << TI_FLAG_WSAVED_SHIFT) | \
+                                 _TIF_DO_NOTIFY_RESUME_MASK | \
+                                 _TIF_NEED_RESCHED | _TIF_PERFCTR)
+#define _TIF_DO_NOTIFY_RESUME_MASK      (_TIF_NOTIFY_RESUME | _TIF_SIGPENDING)
+
+/*
+ * Thread-synchronous status.
+ *
+ * This is different from the flags in that nobody else
+ * ever touches our thread-synchronous status, so we don't
+ * have to worry about atomic accesses.
+ *
+ * Note that there are only 8 bits available.
+ */
+#define TS_RESTORE_SIGMASK      0x0001  /* restore signal mask in do_signal() */
+
+#ifndef __ASSEMBLY__
+#define HAVE_SET_RESTORE_SIGMASK        1
+static inline void set_restore_sigmask(void)
+{
+        struct thread_info *ti = current_thread_info();
+        ti->status |= TS_RESTORE_SIGMASK;
+        set_bit(TIF_SIGPENDING, &ti->flags);
+}
+#endif  /* !__ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_THREAD_INFO_H */
diff --git a/arch/sparc/include/asm/timer.h b/arch/sparc/include/asm/timer.h
new file mode 100644
index 000000000000..612fd2779d9e
--- /dev/null
+++ b/arch/sparc/include/asm/timer.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_TIMER_H
+#define ___ASM_SPARC_TIMER_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/timer_64.h>
+#else
+#include <asm/timer_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/timer_32.h b/arch/sparc/include/asm/timer_32.h
index 361e53898dd7..361e53898dd7 100644
--- a/include/asm-sparc/timer_32.h
+++ b/arch/sparc/include/asm/timer_32.h
diff --git a/include/asm-sparc/timer_64.h b/arch/sparc/include/asm/timer_64.h
index 5b779fd1f788..5b779fd1f788 100644
--- a/include/asm-sparc/timer_64.h
+++ b/arch/sparc/include/asm/timer_64.h
diff --git a/arch/sparc/include/asm/timex.h b/arch/sparc/include/asm/timex.h
new file mode 100644
index 000000000000..70cc37b73827
--- /dev/null
+++ b/arch/sparc/include/asm/timex.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_TIMEX_H
+#define ___ASM_SPARC_TIMEX_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/timex_64.h>
+#else
+#include <asm/timex_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/timex_32.h b/arch/sparc/include/asm/timex_32.h
new file mode 100644
index 000000000000..b6ccdb0d6f7d
--- /dev/null
+++ b/arch/sparc/include/asm/timex_32.h
@@ -0,0 +1,15 @@
+/*
+ * linux/include/asm/timex.h
+ *
+ * sparc architecture timex specifications
+ */
+#ifndef _ASMsparc_TIMEX_H
+#define _ASMsparc_TIMEX_H
+
+#define CLOCK_TICK_RATE 1193180 /* Underlying HZ */
+
+/* XXX Maybe do something better at some point... -DaveM */
+typedef unsigned long cycles_t;
+#define get_cycles()    (0)
+
+#endif
diff --git a/arch/sparc/include/asm/timex_64.h b/arch/sparc/include/asm/timex_64.h
new file mode 100644
index 000000000000..18b30bc9823b
--- /dev/null
+++ b/arch/sparc/include/asm/timex_64.h
@@ -0,0 +1,19 @@
+/*
+ * linux/include/asm/timex.h
+ *
+ * sparc64 architecture timex specifications
+ */
+#ifndef _ASMsparc64_TIMEX_H
+#define _ASMsparc64_TIMEX_H
+
+#include <asm/timer.h>
+
+#define CLOCK_TICK_RATE 1193180 /* Underlying HZ */
+
+/* Getting on the cycle counter on sparc64. */
+typedef unsigned long cycles_t;
+#define get_cycles()    tick_ops->get_tick()
+
+#define ARCH_HAS_READ_CURRENT_TIMER
+
+#endif
diff --git a/arch/sparc/include/asm/tlb.h b/arch/sparc/include/asm/tlb.h
new file mode 100644
index 000000000000..92d0393bbcdc
--- /dev/null
+++ b/arch/sparc/include/asm/tlb.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_TLB_H
+#define ___ASM_SPARC_TLB_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/tlb_64.h>
+#else
+#include <asm/tlb_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/tlb_32.h b/arch/sparc/include/asm/tlb_32.h
index 6d02d1ce53f3..6d02d1ce53f3 100644
--- a/include/asm-sparc/tlb_32.h
+++ b/arch/sparc/include/asm/tlb_32.h
diff --git a/include/asm-sparc/tlb_64.h b/arch/sparc/include/asm/tlb_64.h
index ec81cdedef2c..ec81cdedef2c 100644
--- a/include/asm-sparc/tlb_64.h
+++ b/arch/sparc/include/asm/tlb_64.h
diff --git a/arch/sparc/include/asm/tlbflush.h b/arch/sparc/include/asm/tlbflush.h
new file mode 100644
index 000000000000..2c9629fad1e2
--- /dev/null
+++ b/arch/sparc/include/asm/tlbflush.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_TLBFLUSH_H
+#define ___ASM_SPARC_TLBFLUSH_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/tlbflush_64.h>
+#else
+#include <asm/tlbflush_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/tlbflush_32.h b/arch/sparc/include/asm/tlbflush_32.h
index fe0a71abc9bb..fe0a71abc9bb 100644
--- a/include/asm-sparc/tlbflush_32.h
+++ b/arch/sparc/include/asm/tlbflush_32.h
diff --git a/include/asm-sparc/tlbflush_64.h b/arch/sparc/include/asm/tlbflush_64.h
index fbb675dbe0c9..fbb675dbe0c9 100644
--- a/include/asm-sparc/tlbflush_64.h
+++ b/arch/sparc/include/asm/tlbflush_64.h
diff --git a/arch/sparc/include/asm/topology.h b/arch/sparc/include/asm/topology.h
new file mode 100644
index 000000000000..ee4f191d394a
--- /dev/null
+++ b/arch/sparc/include/asm/topology.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_TOPOLOGY_H
+#define ___ASM_SPARC_TOPOLOGY_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/topology_64.h>
+#else
+#include <asm/topology_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/topology_32.h b/arch/sparc/include/asm/topology_32.h
index ee5ac9c9da28..ee5ac9c9da28 100644
--- a/include/asm-sparc/topology_32.h
+++ b/arch/sparc/include/asm/topology_32.h
diff --git a/include/asm-sparc/topology_64.h b/arch/sparc/include/asm/topology_64.h
index 001c04027c82..001c04027c82 100644
--- a/include/asm-sparc/topology_64.h
+++ b/arch/sparc/include/asm/topology_64.h
diff --git a/include/asm-sparc/traps.h b/arch/sparc/include/asm/traps.h
index bebdbf8f43a8..bebdbf8f43a8 100644
--- a/include/asm-sparc/traps.h
+++ b/arch/sparc/include/asm/traps.h
diff --git a/include/asm-sparc/tsb.h b/arch/sparc/include/asm/tsb.h
index 76e4299dd9bc..76e4299dd9bc 100644
--- a/include/asm-sparc/tsb.h
+++ b/arch/sparc/include/asm/tsb.h
diff --git a/include/asm-sparc/tsunami.h b/arch/sparc/include/asm/tsunami.h
index 5bbd1d523baa..5bbd1d523baa 100644
--- a/include/asm-sparc/tsunami.h
+++ b/arch/sparc/include/asm/tsunami.h
diff --git a/include/asm-sparc/ttable.h b/arch/sparc/include/asm/ttable.h
index 5708ba2719fb..5708ba2719fb 100644
--- a/include/asm-sparc/ttable.h
+++ b/arch/sparc/include/asm/ttable.h
diff --git a/include/asm-sparc/turbosparc.h b/arch/sparc/include/asm/turbosparc.h
index 17c73282db0a..17c73282db0a 100644
--- a/include/asm-sparc/turbosparc.h
+++ b/arch/sparc/include/asm/turbosparc.h
diff --git a/include/asm-sparc/types.h b/arch/sparc/include/asm/types.h
index 8c28fde5eaa2..8c28fde5eaa2 100644
--- a/include/asm-sparc/types.h
+++ b/arch/sparc/include/asm/types.h
diff --git a/arch/sparc/include/asm/uaccess.h b/arch/sparc/include/asm/uaccess.h
new file mode 100644
index 000000000000..e88fbe5c0457
--- /dev/null
+++ b/arch/sparc/include/asm/uaccess.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_UACCESS_H
+#define ___ASM_SPARC_UACCESS_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/uaccess_64.h>
+#else
+#include <asm/uaccess_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/uaccess_32.h b/arch/sparc/include/asm/uaccess_32.h
index 47d5619d43fa..47d5619d43fa 100644
--- a/include/asm-sparc/uaccess_32.h
+++ b/arch/sparc/include/asm/uaccess_32.h
diff --git a/include/asm-sparc/uaccess_64.h b/arch/sparc/include/asm/uaccess_64.h
index 296ef30e05c8..296ef30e05c8 100644
--- a/include/asm-sparc/uaccess_64.h
+++ b/arch/sparc/include/asm/uaccess_64.h
diff --git a/include/asm-sparc/uctx.h b/arch/sparc/include/asm/uctx.h
index dc937c75ffdd..dc937c75ffdd 100644
--- a/include/asm-sparc/uctx.h
+++ b/arch/sparc/include/asm/uctx.h
diff --git a/include/asm-sparc/unaligned.h b/arch/sparc/include/asm/unaligned.h
index 11d2d5fb5902..11d2d5fb5902 100644
--- a/include/asm-sparc/unaligned.h
+++ b/arch/sparc/include/asm/unaligned.h
diff --git a/arch/sparc/include/asm/unistd.h b/arch/sparc/include/asm/unistd.h
new file mode 100644
index 000000000000..4207fb362da0
--- /dev/null
+++ b/arch/sparc/include/asm/unistd.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_UNISTD_H
+#define ___ASM_SPARC_UNISTD_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/unistd_64.h>
+#else
+#include <asm/unistd_32.h>
+#endif
+#endif
diff --git a/include/asm-sparc/unistd_32.h b/arch/sparc/include/asm/unistd_32.h
index 648643a9f139..648643a9f139 100644
--- a/include/asm-sparc/unistd_32.h
+++ b/arch/sparc/include/asm/unistd_32.h
diff --git a/include/asm-sparc/unistd_64.h b/arch/sparc/include/asm/unistd_64.h
index c5cc0e052321..c5cc0e052321 100644
--- a/include/asm-sparc/unistd_64.h
+++ b/arch/sparc/include/asm/unistd_64.h
diff --git a/include/asm-sparc/upa.h b/arch/sparc/include/asm/upa.h
index 5b1633223f92..5b1633223f92 100644
--- a/include/asm-sparc/upa.h
+++ b/arch/sparc/include/asm/upa.h
diff --git a/include/asm-sparc/user.h b/arch/sparc/include/asm/user.h
index 3400ea87f148..3400ea87f148 100644
--- a/include/asm-sparc/user.h
+++ b/arch/sparc/include/asm/user.h
diff --git a/arch/sparc/include/asm/utrap.h b/arch/sparc/include/asm/utrap.h
new file mode 100644
index 000000000000..b10e527c22d9
--- /dev/null
+++ b/arch/sparc/include/asm/utrap.h
@@ -0,0 +1,51 @@
+/*
+ * include/asm/utrap.h
+ *
+ * Copyright (C) 1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ */
+
+#ifndef __ASM_SPARC64_UTRAP_H
+#define __ASM_SPARC64_UTRAP_H
+
+#define UT_INSTRUCTION_EXCEPTION                1
+#define UT_INSTRUCTION_ERROR                    2
+#define UT_INSTRUCTION_PROTECTION               3
+#define UT_ILLTRAP_INSTRUCTION                  4
+#define UT_ILLEGAL_INSTRUCTION                  5
+#define UT_PRIVILEGED_OPCODE                    6
+#define UT_FP_DISABLED                          7
+#define UT_FP_EXCEPTION_IEEE_754                8
+#define UT_FP_EXCEPTION_OTHER                   9
+#define UT_TAG_OVERVIEW                         10
+#define UT_DIVISION_BY_ZERO                     11
+#define UT_DATA_EXCEPTION                       12
+#define UT_DATA_ERROR                           13
+#define UT_DATA_PROTECTION                      14
+#define UT_MEM_ADDRESS_NOT_ALIGNED              15
+#define UT_PRIVILEGED_ACTION                    16
+#define UT_ASYNC_DATA_ERROR                     17
+#define UT_TRAP_INSTRUCTION_16                  18
+#define UT_TRAP_INSTRUCTION_17                  19
+#define UT_TRAP_INSTRUCTION_18                  20
+#define UT_TRAP_INSTRUCTION_19                  21
+#define UT_TRAP_INSTRUCTION_20                  22
+#define UT_TRAP_INSTRUCTION_21                  23
+#define UT_TRAP_INSTRUCTION_22                  24
+#define UT_TRAP_INSTRUCTION_23                  25
+#define UT_TRAP_INSTRUCTION_24                  26
+#define UT_TRAP_INSTRUCTION_25                  27
+#define UT_TRAP_INSTRUCTION_26                  28
+#define UT_TRAP_INSTRUCTION_27                  29
+#define UT_TRAP_INSTRUCTION_28                  30
+#define UT_TRAP_INSTRUCTION_29                  31
+#define UT_TRAP_INSTRUCTION_30                  32
+#define UT_TRAP_INSTRUCTION_31                  33
+
+#define UTH_NOCHANGE                            (-1)
+
+#ifndef __ASSEMBLY__
+typedef int utrap_entry_t;
+typedef void *utrap_handler_t;
+#endif /* __ASSEMBLY__ */
+
+#endif /* !(__ASM_SPARC64_PROCESSOR_H) */
diff --git a/include/asm-sparc/vac-ops.h b/arch/sparc/include/asm/vac-ops.h
index d10527611f11..d10527611f11 100644
--- a/include/asm-sparc/vac-ops.h
+++ b/arch/sparc/include/asm/vac-ops.h
diff --git a/arch/sparc/include/asm/vaddrs.h b/arch/sparc/include/asm/vaddrs.h
new file mode 100644
index 000000000000..541e13755cec
--- /dev/null
+++ b/arch/sparc/include/asm/vaddrs.h
@@ -0,0 +1,64 @@
+#ifndef _SPARC_VADDRS_H
+#define _SPARC_VADDRS_H
+
+#include <asm/head.h>
+
+/*
+ * asm/vaddrs.h:  Here we define the virtual addresses at
+ *                      which important things will be mapped.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 2000 Anton Blanchard (anton@samba.org)
+ */
+
+#define SRMMU_MAXMEM            0x0c000000
+
+#define SRMMU_NOCACHE_VADDR     (KERNBASE + SRMMU_MAXMEM)
+                                /* = 0x0fc000000 */
+/* XXX Empiricals - this needs to go away - KMW */
+#define SRMMU_MIN_NOCACHE_PAGES (550)
+#define SRMMU_MAX_NOCACHE_PAGES (1280)
+
+/* The following constant is used in mm/srmmu.c::srmmu_nocache_calcsize()
+ * to determine the amount of memory that will be reserved as nocache:
+ *
+ * 256 pages will be taken as nocache per each
+ * SRMMU_NOCACHE_ALCRATIO MB of system memory.
+ *
+ * limits enforced:     nocache minimum = 256 pages
+ *                      nocache maximum = 1280 pages
+ */
+#define SRMMU_NOCACHE_ALCRATIO  64      /* 256 pages per 64MB of system RAM */
+
+#define SUN4M_IOBASE_VADDR      0xfd000000 /* Base for mapping pages */
+#define IOBASE_VADDR            0xfe000000
+#define IOBASE_END              0xfe600000
+
+/*
+ * On the sun4/4c we need a place
+ * to reliably map locked down kernel data.  This includes the
+ * task_struct and kernel stack pages of each process plus the
+ * scsi buffers during dvma IO transfers, also the floppy buffers
+ * during pseudo dma which runs with traps off (no faults allowed).
+ * Some quick calculations yield:
+ *       NR_TASKS <512> * (3 * PAGE_SIZE) == 0x600000
+ * Subtract this from 0xc00000 and you get 0x927C0 of vm left
+ * over to map SCSI dvma + floppy pseudo-dma buffers.  So be
+ * careful if you change NR_TASKS or else there won't be enough
+ * room for it all.
+ */
+#define SUN4C_LOCK_VADDR        0xff000000
+#define SUN4C_LOCK_END          0xffc00000
+
+#define KADB_DEBUGGER_BEGVM     0xffc00000 /* Where kern debugger is in virt-mem */
+#define KADB_DEBUGGER_ENDVM     0xffd00000
+#define DEBUG_FIRSTVADDR        KADB_DEBUGGER_BEGVM
+#define DEBUG_LASTVADDR         KADB_DEBUGGER_ENDVM
+
+#define LINUX_OPPROM_BEGVM      0xffd00000
+#define LINUX_OPPROM_ENDVM      0xfff00000
+
+#define DVMA_VADDR              0xfff00000 /* Base area of the DVMA on suns */
+#define DVMA_END                0xfffc0000
+
+#endif /* !(_SPARC_VADDRS_H) */
diff --git a/include/asm-sparc/vfc_ioctls.h b/arch/sparc/include/asm/vfc_ioctls.h
index af8b69007b22..af8b69007b22 100644
--- a/include/asm-sparc/vfc_ioctls.h
+++ b/arch/sparc/include/asm/vfc_ioctls.h
diff --git a/include/asm-sparc/vga.h b/arch/sparc/include/asm/vga.h
index c69d5b2ba19a..c69d5b2ba19a 100644
--- a/include/asm-sparc/vga.h
+++ b/arch/sparc/include/asm/vga.h
diff --git a/include/asm-sparc/viking.h b/arch/sparc/include/asm/viking.h
index 989930aeb093..989930aeb093 100644
--- a/include/asm-sparc/viking.h
+++ b/arch/sparc/include/asm/viking.h
diff --git a/include/asm-sparc/vio.h b/arch/sparc/include/asm/vio.h
index d4de32f0f8af..d4de32f0f8af 100644
--- a/include/asm-sparc/vio.h
+++ b/arch/sparc/include/asm/vio.h
diff --git a/include/asm-sparc/visasm.h b/arch/sparc/include/asm/visasm.h
index de797b9bf552..de797b9bf552 100644
--- a/include/asm-sparc/visasm.h
+++ b/arch/sparc/include/asm/visasm.h
diff --git a/include/asm-sparc/watchdog.h b/arch/sparc/include/asm/watchdog.h
index 5baf2d3919cf..5baf2d3919cf 100644
--- a/include/asm-sparc/watchdog.h
+++ b/arch/sparc/include/asm/watchdog.h
diff --git a/include/asm-sparc/winmacro.h b/arch/sparc/include/asm/winmacro.h
index 5b0a06dc3bcb..5b0a06dc3bcb 100644
--- a/include/asm-sparc/winmacro.h
+++ b/arch/sparc/include/asm/winmacro.h
diff --git a/arch/sparc/include/asm/xor.h b/arch/sparc/include/asm/xor.h
new file mode 100644
index 000000000000..8ed591c7db2d
--- /dev/null
+++ b/arch/sparc/include/asm/xor.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_XOR_H
+#define ___ASM_SPARC_XOR_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/xor_64.h>
+#else
+#include <asm/xor_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/xor_32.h b/arch/sparc/include/asm/xor_32.h
new file mode 100644
index 000000000000..44bfa0787f3f
--- /dev/null
+++ b/arch/sparc/include/asm/xor_32.h
@@ -0,0 +1,269 @@
+/*
+ * include/asm/xor.h
+ *
+ * Optimized RAID-5 checksumming functions for 32-bit Sparc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * You should have received a copy of the GNU General Public License
+ * (for example /usr/src/linux/COPYING); if not, write to the Free
+ * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*
+ * High speed xor_block operation for RAID4/5 utilizing the
+ * ldd/std SPARC instructions.
+ *
+ * Copyright (C) 1999 Jakub Jelinek (jj@ultra.linux.cz)
+ */
+
+static void
+sparc_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
+{
+        int lines = bytes / (sizeof (long)) / 8;
+
+        do {
+                __asm__ __volatile__(
+                  "ldd [%0 + 0x00], %%g2\n\t"
+                  "ldd [%0 + 0x08], %%g4\n\t"
+                  "ldd [%0 + 0x10], %%o0\n\t"
+                  "ldd [%0 + 0x18], %%o2\n\t"
+                  "ldd [%1 + 0x00], %%o4\n\t"
+                  "ldd [%1 + 0x08], %%l0\n\t"
+                  "ldd [%1 + 0x10], %%l2\n\t"
+                  "ldd [%1 + 0x18], %%l4\n\t"
+                  "xor %%g2, %%o4, %%g2\n\t"
+                  "xor %%g3, %%o5, %%g3\n\t"
+                  "xor %%g4, %%l0, %%g4\n\t"
+                  "xor %%g5, %%l1, %%g5\n\t"
+                  "xor %%o0, %%l2, %%o0\n\t"
+                  "xor %%o1, %%l3, %%o1\n\t"
+                  "xor %%o2, %%l4, %%o2\n\t"
+                  "xor %%o3, %%l5, %%o3\n\t"
+                  "std %%g2, [%0 + 0x00]\n\t"
+                  "std %%g4, [%0 + 0x08]\n\t"
+                  "std %%o0, [%0 + 0x10]\n\t"
+                  "std %%o2, [%0 + 0x18]\n"
+                :
+                : "r" (p1), "r" (p2)
+                : "g2", "g3", "g4", "g5",
+                  "o0", "o1", "o2", "o3", "o4", "o5",
+                  "l0", "l1", "l2", "l3", "l4", "l5");
+                p1 += 8;
+                p2 += 8;
+        } while (--lines > 0);
+}
+
+static void
+sparc_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+        unsigned long *p3)
+{
+        int lines = bytes / (sizeof (long)) / 8;
+
+        do {
+                __asm__ __volatile__(
+                  "ldd [%0 + 0x00], %%g2\n\t"
+                  "ldd [%0 + 0x08], %%g4\n\t"
+                  "ldd [%0 + 0x10], %%o0\n\t"
+                  "ldd [%0 + 0x18], %%o2\n\t"
+                  "ldd [%1 + 0x00], %%o4\n\t"
+                  "ldd [%1 + 0x08], %%l0\n\t"
+                  "ldd [%1 + 0x10], %%l2\n\t"
+                  "ldd [%1 + 0x18], %%l4\n\t"
+                  "xor %%g2, %%o4, %%g2\n\t"
+                  "xor %%g3, %%o5, %%g3\n\t"
+                  "ldd [%2 + 0x00], %%o4\n\t"
+                  "xor %%g4, %%l0, %%g4\n\t"
+                  "xor %%g5, %%l1, %%g5\n\t"
+                  "ldd [%2 + 0x08], %%l0\n\t"
+                  "xor %%o0, %%l2, %%o0\n\t"
+                  "xor %%o1, %%l3, %%o1\n\t"
+                  "ldd [%2 + 0x10], %%l2\n\t"
+                  "xor %%o2, %%l4, %%o2\n\t"
+                  "xor %%o3, %%l5, %%o3\n\t"
+                  "ldd [%2 + 0x18], %%l4\n\t"
+                  "xor %%g2, %%o4, %%g2\n\t"
+                  "xor %%g3, %%o5, %%g3\n\t"
+                  "xor %%g4, %%l0, %%g4\n\t"
+                  "xor %%g5, %%l1, %%g5\n\t"
+                  "xor %%o0, %%l2, %%o0\n\t"
+                  "xor %%o1, %%l3, %%o1\n\t"
+                  "xor %%o2, %%l4, %%o2\n\t"
+                  "xor %%o3, %%l5, %%o3\n\t"
+                  "std %%g2, [%0 + 0x00]\n\t"
+                  "std %%g4, [%0 + 0x08]\n\t"
+                  "std %%o0, [%0 + 0x10]\n\t"
+                  "std %%o2, [%0 + 0x18]\n"
+                :
+                : "r" (p1), "r" (p2), "r" (p3)
+                : "g2", "g3", "g4", "g5",
+                  "o0", "o1", "o2", "o3", "o4", "o5",
+                  "l0", "l1", "l2", "l3", "l4", "l5");
+                p1 += 8;
+                p2 += 8;
+                p3 += 8;
+        } while (--lines > 0);
+}
+
+static void
+sparc_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+        unsigned long *p3, unsigned long *p4)
+{
+        int lines = bytes / (sizeof (long)) / 8;
+
+        do {
+                __asm__ __volatile__(
+                  "ldd [%0 + 0x00], %%g2\n\t"
+                  "ldd [%0 + 0x08], %%g4\n\t"
+                  "ldd [%0 + 0x10], %%o0\n\t"
+                  "ldd [%0 + 0x18], %%o2\n\t"
+                  "ldd [%1 + 0x00], %%o4\n\t"
+                  "ldd [%1 + 0x08], %%l0\n\t"
+                  "ldd [%1 + 0x10], %%l2\n\t"
+                  "ldd [%1 + 0x18], %%l4\n\t"
+                  "xor %%g2, %%o4, %%g2\n\t"
+                  "xor %%g3, %%o5, %%g3\n\t"
+                  "ldd [%2 + 0x00], %%o4\n\t"
+                  "xor %%g4, %%l0, %%g4\n\t"
+                  "xor %%g5, %%l1, %%g5\n\t"
+                  "ldd [%2 + 0x08], %%l0\n\t"
+                  "xor %%o0, %%l2, %%o0\n\t"
+                  "xor %%o1, %%l3, %%o1\n\t"
+                  "ldd [%2 + 0x10], %%l2\n\t"
+                  "xor %%o2, %%l4, %%o2\n\t"
+                  "xor %%o3, %%l5, %%o3\n\t"
+                  "ldd [%2 + 0x18], %%l4\n\t"
+                  "xor %%g2, %%o4, %%g2\n\t"
+                  "xor %%g3, %%o5, %%g3\n\t"
+                  "ldd [%3 + 0x00], %%o4\n\t"
+                  "xor %%g4, %%l0, %%g4\n\t"
+                  "xor %%g5, %%l1, %%g5\n\t"
+                  "ldd [%3 + 0x08], %%l0\n\t"
+                  "xor %%o0, %%l2, %%o0\n\t"
+                  "xor %%o1, %%l3, %%o1\n\t"
+                  "ldd [%3 + 0x10], %%l2\n\t"
+                  "xor %%o2, %%l4, %%o2\n\t"
+                  "xor %%o3, %%l5, %%o3\n\t"
+                  "ldd [%3 + 0x18], %%l4\n\t"
+                  "xor %%g2, %%o4, %%g2\n\t"
+                  "xor %%g3, %%o5, %%g3\n\t"
+                  "xor %%g4, %%l0, %%g4\n\t"
+                  "xor %%g5, %%l1, %%g5\n\t"
+                  "xor %%o0, %%l2, %%o0\n\t"
+                  "xor %%o1, %%l3, %%o1\n\t"
+                  "xor %%o2, %%l4, %%o2\n\t"
+                  "xor %%o3, %%l5, %%o3\n\t"
+                  "std %%g2, [%0 + 0x00]\n\t"
+                  "std %%g4, [%0 + 0x08]\n\t"
+                  "std %%o0, [%0 + 0x10]\n\t"
+                  "std %%o2, [%0 + 0x18]\n"
+                :
+                : "r" (p1), "r" (p2), "r" (p3), "r" (p4)
+                : "g2", "g3", "g4", "g5",
+                  "o0", "o1", "o2", "o3", "o4", "o5",
+                  "l0", "l1", "l2", "l3", "l4", "l5");
+                p1 += 8;
+                p2 += 8;
+                p3 += 8;
+                p4 += 8;
+        } while (--lines > 0);
+}
+
+static void
+sparc_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+        unsigned long *p3, unsigned long *p4, unsigned long *p5)
+{
+        int lines = bytes / (sizeof (long)) / 8;
+
+        do {
+                __asm__ __volatile__(
+                  "ldd [%0 + 0x00], %%g2\n\t"
+                  "ldd [%0 + 0x08], %%g4\n\t"
+                  "ldd [%0 + 0x10], %%o0\n\t"
+                  "ldd [%0 + 0x18], %%o2\n\t"
+                  "ldd [%1 + 0x00], %%o4\n\t"
+                  "ldd [%1 + 0x08], %%l0\n\t"
+                  "ldd [%1 + 0x10], %%l2\n\t"
+                  "ldd [%1 + 0x18], %%l4\n\t"
+                  "xor %%g2, %%o4, %%g2\n\t"
+                  "xor %%g3, %%o5, %%g3\n\t"
+                  "ldd [%2 + 0x00], %%o4\n\t"
+                  "xor %%g4, %%l0, %%g4\n\t"
+                  "xor %%g5, %%l1, %%g5\n\t"
+                  "ldd [%2 + 0x08], %%l0\n\t"
+                  "xor %%o0, %%l2, %%o0\n\t"
+                  "xor %%o1, %%l3, %%o1\n\t"
+                  "ldd [%2 + 0x10], %%l2\n\t"
+                  "xor %%o2, %%l4, %%o2\n\t"
+                  "xor %%o3, %%l5, %%o3\n\t"
+                  "ldd [%2 + 0x18], %%l4\n\t"
+                  "xor %%g2, %%o4, %%g2\n\t"
+                  "xor %%g3, %%o5, %%g3\n\t"
+                  "ldd [%3 + 0x00], %%o4\n\t"
+                  "xor %%g4, %%l0, %%g4\n\t"
+                  "xor %%g5, %%l1, %%g5\n\t"
+                  "ldd [%3 + 0x08], %%l0\n\t"
+                  "xor %%o0, %%l2, %%o0\n\t"
+                  "xor %%o1, %%l3, %%o1\n\t"
+                  "ldd [%3 + 0x10], %%l2\n\t"
+                  "xor %%o2, %%l4, %%o2\n\t"
+                  "xor %%o3, %%l5, %%o3\n\t"
+                  "ldd [%3 + 0x18], %%l4\n\t"
+                  "xor %%g2, %%o4, %%g2\n\t"
+                  "xor %%g3, %%o5, %%g3\n\t"
+                  "ldd [%4 + 0x00], %%o4\n\t"
+                  "xor %%g4, %%l0, %%g4\n\t"
+                  "xor %%g5, %%l1, %%g5\n\t"
+                  "ldd [%4 + 0x08], %%l0\n\t"
+                  "xor %%o0, %%l2, %%o0\n\t"
+                  "xor %%o1, %%l3, %%o1\n\t"
+                  "ldd [%4 + 0x10], %%l2\n\t"
+                  "xor %%o2, %%l4, %%o2\n\t"
+                  "xor %%o3, %%l5, %%o3\n\t"
+                  "ldd [%4 + 0x18], %%l4\n\t"
+                  "xor %%g2, %%o4, %%g2\n\t"
+                  "xor %%g3, %%o5, %%g3\n\t"
+                  "xor %%g4, %%l0, %%g4\n\t"
+                  "xor %%g5, %%l1, %%g5\n\t"
+                  "xor %%o0, %%l2, %%o0\n\t"
+                  "xor %%o1, %%l3, %%o1\n\t"
+                  "xor %%o2, %%l4, %%o2\n\t"
+                  "xor %%o3, %%l5, %%o3\n\t"
+                  "std %%g2, [%0 + 0x00]\n\t"
+                  "std %%g4, [%0 + 0x08]\n\t"
+                  "std %%o0, [%0 + 0x10]\n\t"
+                  "std %%o2, [%0 + 0x18]\n"
+                :
+                : "r" (p1), "r" (p2), "r" (p3), "r" (p4), "r" (p5)
+                : "g2", "g3", "g4", "g5",
+                  "o0", "o1", "o2", "o3", "o4", "o5",
+                  "l0", "l1", "l2", "l3", "l4", "l5");
+                p1 += 8;
+                p2 += 8;
+                p3 += 8;
+                p4 += 8;
+                p5 += 8;
+        } while (--lines > 0);
+}
+
+static struct xor_block_template xor_block_SPARC = {
+        .name   = "SPARC",
+        .do_2   = sparc_2,
+        .do_3   = sparc_3,
+        .do_4   = sparc_4,
+        .do_5   = sparc_5,
+};
+
+/* For grins, also test the generic routines.  */
+#include <asm-generic/xor.h>
+
+#undef XOR_TRY_TEMPLATES
+#define XOR_TRY_TEMPLATES                               \
+        do {                                            \
+                xor_speed(&xor_block_8regs);            \
+                xor_speed(&xor_block_32regs);           \
+                xor_speed(&xor_block_SPARC);            \
+        } while (0)
diff --git a/arch/sparc/include/asm/xor_64.h b/arch/sparc/include/asm/xor_64.h
new file mode 100644
index 000000000000..bee4bf4be3af
--- /dev/null
+++ b/arch/sparc/include/asm/xor_64.h
@@ -0,0 +1,70 @@
+/*
+ * include/asm/xor.h
+ *
+ * High speed xor_block operation for RAID4/5 utilizing the
+ * UltraSparc Visual Instruction Set and Niagara block-init
+ * twin-load instructions.
+ *
+ * Copyright (C) 1997, 1999 Jakub Jelinek (jj@ultra.linux.cz)
+ * Copyright (C) 2006 David S. Miller <davem@davemloft.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * You should have received a copy of the GNU General Public License
+ * (for example /usr/src/linux/COPYING); if not, write to the Free
+ * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <asm/spitfire.h>
+
+extern void xor_vis_2(unsigned long, unsigned long *, unsigned long *);
+extern void xor_vis_3(unsigned long, unsigned long *, unsigned long *,
+                      unsigned long *);
+extern void xor_vis_4(unsigned long, unsigned long *, unsigned long *,
+                      unsigned long *, unsigned long *);
+extern void xor_vis_5(unsigned long, unsigned long *, unsigned long *,
+                      unsigned long *, unsigned long *, unsigned long *);
+
+/* XXX Ugh, write cheetah versions... -DaveM */
+
+static struct xor_block_template xor_block_VIS = {
+        .name   = "VIS",
+        .do_2   = xor_vis_2,
+        .do_3   = xor_vis_3,
+        .do_4   = xor_vis_4,
+        .do_5   = xor_vis_5,
+};
+
+extern void xor_niagara_2(unsigned long, unsigned long *, unsigned long *);
+extern void xor_niagara_3(unsigned long, unsigned long *, unsigned long *,
+                          unsigned long *);
+extern void xor_niagara_4(unsigned long, unsigned long *, unsigned long *,
+                          unsigned long *, unsigned long *);
+extern void xor_niagara_5(unsigned long, unsigned long *, unsigned long *,
+                          unsigned long *, unsigned long *, unsigned long *);
+
+static struct xor_block_template xor_block_niagara = {
+        .name   = "Niagara",
+        .do_2   = xor_niagara_2,
+        .do_3   = xor_niagara_3,
+        .do_4   = xor_niagara_4,
+        .do_5   = xor_niagara_5,
+};
+
+#undef XOR_TRY_TEMPLATES
+#define XOR_TRY_TEMPLATES                               \
+        do {                                            \
+                xor_speed(&xor_block_VIS);              \
+                xor_speed(&xor_block_niagara);          \
+        } while (0)
+
+/* For VIS for everything except Niagara.  */
+#define XOR_SELECT_TEMPLATE(FASTEST) \
+        ((tlb_type == hypervisor && \
+          (sun4v_chip_type == SUN4V_CHIP_NIAGARA1 || \
+           sun4v_chip_type == SUN4V_CHIP_NIAGARA2)) ? \
+         &xor_block_niagara : \
+         &xor_block_VIS)
diff --git a/arch/sparc/kernel/entry.S b/arch/sparc/kernel/entry.S
index 2f96256dc515..e8cdf715a546 100644
--- a/arch/sparc/kernel/entry.S
+++ b/arch/sparc/kernel/entry.S
@@ -1196,8 +1196,9 @@ sys_rt_sigreturn:
         be      1f
          nop
 
+        add     %sp, STACKFRAME_SZ, %o0
         call    syscall_trace
-         nop
+         mov    1, %o1
 
 1:
         /* We are returning to a signal handler. */
@@ -1287,8 +1288,12 @@ linux_fast_syscall:
          mov    %i3, %o3
 
 linux_syscall_trace:
+        add     %sp, STACKFRAME_SZ, %o0
         call    syscall_trace
-         nop
+         mov    0, %o1
+        cmp     %o0, 0
+        bne     3f
+         mov    -ENOSYS, %o0
         mov     %i0, %o0
         mov     %i1, %o1
         mov     %i2, %o2
@@ -1337,6 +1342,7 @@ syscall_is_too_hard:
         call    %l7
          mov    %i5, %o5
 
+3:
         st      %o0, [%sp + STACKFRAME_SZ + PT_I0]
 
 ret_sys_call:
@@ -1374,6 +1380,8 @@ ret_sys_call:
          st     %l2, [%sp + STACKFRAME_SZ + PT_NPC]
 
 linux_syscall_trace2:
+        add     %sp, STACKFRAME_SZ, %o0
+        mov     1, %o1
         call    syscall_trace
          add    %l1, 0x4, %l2                   /* npc = npc+4 */
         st      %l1, [%sp + STACKFRAME_SZ + PT_PC]
diff --git a/arch/sparc/kernel/ptrace.c b/arch/sparc/kernel/ptrace.c
index 81f3b929743f..20699c701412 100644
--- a/arch/sparc/kernel/ptrace.c
+++ b/arch/sparc/kernel/ptrace.c
@@ -21,6 +21,7 @@
 #include <linux/signal.h>
 #include <linux/regset.h>
 #include <linux/elf.h>
+#include <linux/tracehook.h>
 
 #include <asm/pgtable.h>
 #include <asm/system.h>
@@ -450,21 +451,16 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
         return ret;
 }
 
-asmlinkage void syscall_trace(void)
+asmlinkage int syscall_trace(struct pt_regs *regs, int syscall_exit_p)
 {
-        if (!test_thread_flag(TIF_SYSCALL_TRACE))
-                return;
-        if (!(current->ptrace & PT_PTRACED))
-                return;
-        ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
-                                 ? 0x80 : 0));
-        /*
-         * this isn't the same as continuing with a signal, but it will do
-         * for normal use.  strace only continues with a signal if the
-         * stopping signal is not SIGTRAP.  -brl
-         */
-        if (current->exit_code) {
-                send_sig (current->exit_code, current, 1);
-                current->exit_code = 0;
+        int ret = 0;
+
+        if (test_thread_flag(TIF_SYSCALL_TRACE)) {
+                if (syscall_exit_p)
+                        tracehook_report_syscall_exit(regs, 0);
+                else
+                        ret = tracehook_report_syscall_entry(regs);
         }
+
+        return ret;
 }
diff --git a/arch/sparc/kernel/rtrap.S b/arch/sparc/kernel/rtrap.S
index 891f460b7b96..4da2e1f66290 100644
--- a/arch/sparc/kernel/rtrap.S
+++ b/arch/sparc/kernel/rtrap.S
@@ -69,12 +69,13 @@ ret_trap_lockless_ipi:
 
         ld      [%curptr + TI_FLAGS], %g2
 signal_p:
-        andcc   %g2, (_TIF_SIGPENDING|_TIF_RESTORE_SIGMASK), %g0
+        andcc   %g2, _TIF_DO_NOTIFY_RESUME_MASK, %g0
         bz,a    ret_trap_continue
          ld     [%sp + STACKFRAME_SZ + PT_PSR], %t_psr
 
+        mov     %g2, %o2
         mov     %l5, %o1
-        call    do_signal
+        call    do_notify_resume
          add    %sp, STACKFRAME_SZ, %o0 ! pt_regs ptr
 
         /* Fall through. */
diff --git a/arch/sparc/kernel/signal.c b/arch/sparc/kernel/signal.c
index 3fd1df9f9ba7..c94f91c8b6e0 100644
--- a/arch/sparc/kernel/signal.c
+++ b/arch/sparc/kernel/signal.c
@@ -18,6 +18,7 @@
 #include <linux/smp.h>
 #include <linux/binfmts.h>      /* do_coredum */
 #include <linux/bitops.h>
+#include <linux/tracehook.h>
 
 #include <asm/uaccess.h>
 #include <asm/ptrace.h>
@@ -513,7 +514,7 @@ static inline void syscall_restart(unsigned long orig_i0, struct pt_regs *regs,
  * want to handle. Thus you cannot kill init even with a SIGKILL even by
  * mistake.
  */
-asmlinkage void do_signal(struct pt_regs * regs, unsigned long orig_i0)
+static void do_signal(struct pt_regs *regs, unsigned long orig_i0)
 {
         struct k_sigaction ka;
         int restart_syscall;
@@ -552,6 +553,8 @@ asmlinkage void do_signal(struct pt_regs * regs, unsigned long orig_i0)
                  */
                 if (test_thread_flag(TIF_RESTORE_SIGMASK))
                         clear_thread_flag(TIF_RESTORE_SIGMASK);
+
+                tracehook_signal_handler(signr, &info, &ka, regs, 0);
                 return;
         }
         if (restart_syscall &&
@@ -579,6 +582,17 @@ asmlinkage void do_signal(struct pt_regs * regs, unsigned long orig_i0)
         }
 }
 
+void do_notify_resume(struct pt_regs *regs, unsigned long orig_i0,
+                      unsigned long thread_info_flags)
+{
+        if (thread_info_flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK))
+                do_signal(regs, orig_i0);
+        if (thread_info_flags & _TIF_NOTIFY_RESUME) {
+                clear_thread_flag(TIF_NOTIFY_RESUME);
+                tracehook_notify_resume(regs);
+        }
+}
+
 asmlinkage int
 do_sys_sigstack(struct sigstack __user *ssptr, struct sigstack __user *ossptr,
                 unsigned long sp)
diff --git a/arch/sparc64/Kconfig b/arch/sparc64/Kconfig
index 7c88263256af..923a98959fa7 100644
--- a/arch/sparc64/Kconfig
+++ b/arch/sparc64/Kconfig
@@ -17,6 +17,7 @@ config SPARC64
         select HAVE_LMB
         select HAVE_ARCH_KGDB
         select USE_GENERIC_SMP_HELPERS if SMP
+        select HAVE_ARCH_TRACEHOOK
 
 config GENERIC_TIME
         bool
diff --git a/arch/sparc64/kernel/compat_audit.c b/arch/sparc64/kernel/compat_audit.c
index c1979482aa92..c831b0a4e660 100644
--- a/arch/sparc64/kernel/compat_audit.c
+++ b/arch/sparc64/kernel/compat_audit.c
@@ -1,4 +1,4 @@
-#include <asm-sparc/unistd.h>
+#include <asm/unistd_32.h>
 
 unsigned sparc32_dir_class[] = {
 #include <asm-generic/audit_dir_write.h>
diff --git a/arch/sparc64/kernel/entry.h b/arch/sparc64/kernel/entry.h
index 32fbab620852..fc294a292899 100644
--- a/arch/sparc64/kernel/entry.h
+++ b/arch/sparc64/kernel/entry.h
@@ -22,8 +22,7 @@ extern void do_notify_resume(struct pt_regs *regs,
                              unsigned long orig_i0,
                              unsigned long thread_info_flags);
 
-extern asmlinkage void syscall_trace(struct pt_regs *regs,
-                                     int syscall_exit_p);
+extern asmlinkage int syscall_trace(struct pt_regs *regs, int syscall_exit_p);
 
 extern void bad_trap_tl1(struct pt_regs *regs, long lvl);
 
diff --git a/arch/sparc64/kernel/ptrace.c b/arch/sparc64/kernel/ptrace.c
index f6c9fc92921d..bd578cc4856d 100644
--- a/arch/sparc64/kernel/ptrace.c
+++ b/arch/sparc64/kernel/ptrace.c
@@ -23,6 +23,7 @@
 #include <linux/audit.h>
 #include <linux/signal.h>
 #include <linux/regset.h>
+#include <linux/tracehook.h>
 #include <linux/compat.h>
 #include <linux/elf.h>
 
@@ -1049,8 +1050,10 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
         return ret;
 }
 
-asmlinkage void syscall_trace(struct pt_regs *regs, int syscall_exit_p)
+asmlinkage int syscall_trace(struct pt_regs *regs, int syscall_exit_p)
 {
+        int ret = 0;
+
         /* do the secure computing check first */
         secure_computing(regs->u_regs[UREG_G1]);
 
@@ -1064,27 +1067,14 @@ asmlinkage void syscall_trace(struct pt_regs *regs, int syscall_exit_p)
                 audit_syscall_exit(result, regs->u_regs[UREG_I0]);
         }
 
-        if (!(current->ptrace & PT_PTRACED))
-                goto out;
-
-        if (!test_thread_flag(TIF_SYSCALL_TRACE))
-                goto out;
-
-        ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
-                                 ? 0x80 : 0));
-
-        /*
-         * this isn't the same as continuing with a signal, but it will do
-         * for normal use.  strace only continues with a signal if the
-         * stopping signal is not SIGTRAP.  -brl
-         */
-        if (current->exit_code) {
-                send_sig(current->exit_code, current, 1);
-                current->exit_code = 0;
+        if (test_thread_flag(TIF_SYSCALL_TRACE)) {
+                if (syscall_exit_p)
+                        tracehook_report_syscall_exit(regs, 0);
+                else
+                        ret = tracehook_report_syscall_entry(regs);
         }
 
-out:
-        if (unlikely(current->audit_context) && !syscall_exit_p)
+        if (unlikely(current->audit_context) && !syscall_exit_p && !ret)
                 audit_syscall_entry((test_thread_flag(TIF_32BIT) ?
                                      AUDIT_ARCH_SPARC :
                                      AUDIT_ARCH_SPARC64),
@@ -1093,4 +1083,6 @@ out:
                                     regs->u_regs[UREG_I1],
                                     regs->u_regs[UREG_I2],
                                     regs->u_regs[UREG_I3]);
+
+        return ret;
 }
diff --git a/arch/sparc64/kernel/rtrap.S b/arch/sparc64/kernel/rtrap.S
index c6fc695fe1fe..97a993c1f7f3 100644
--- a/arch/sparc64/kernel/rtrap.S
+++ b/arch/sparc64/kernel/rtrap.S
@@ -46,7 +46,7 @@ __handle_user_windows:
                 wrpr                    %g0, RTRAP_PSTATE_IRQOFF, %pstate
                 ldx                     [%g6 + TI_FLAGS], %l0
 
-1:              andcc                   %l0, _TIF_SIGPENDING, %g0
+1:              andcc                   %l0, _TIF_DO_NOTIFY_RESUME_MASK, %g0
                 be,pt                   %xcc, __handle_user_windows_continue
                  nop
                 mov                     %l5, %o1
@@ -86,7 +86,7 @@ __handle_perfctrs:
                  wrpr                   %g0, RTRAP_PSTATE, %pstate
                 wrpr                    %g0, RTRAP_PSTATE_IRQOFF, %pstate
                 ldx                     [%g6 + TI_FLAGS], %l0
-1:              andcc                   %l0, _TIF_SIGPENDING, %g0
+1:              andcc                   %l0, _TIF_DO_NOTIFY_RESUME_MASK, %g0
 
                 be,pt                   %xcc, __handle_perfctrs_continue
                  sethi                  %hi(TSTATE_PEF), %o0
@@ -195,7 +195,7 @@ __handle_preemption_continue:
                  andcc                  %l1, %o0, %g0
                 andcc                   %l0, _TIF_NEED_RESCHED, %g0
                 bne,pn                  %xcc, __handle_preemption
-                 andcc                  %l0, _TIF_SIGPENDING, %g0
+                 andcc                  %l0, _TIF_DO_NOTIFY_RESUME_MASK, %g0
                 bne,pn                  %xcc, __handle_signal
 __handle_signal_continue:
                  ldub                   [%g6 + TI_WSAVED], %o2
diff --git a/arch/sparc64/kernel/signal.c b/arch/sparc64/kernel/signal.c
index 9667e96fd513..d1b84456a9ee 100644
--- a/arch/sparc64/kernel/signal.c
+++ b/arch/sparc64/kernel/signal.c
@@ -17,11 +17,13 @@
 #include <linux/errno.h>
 #include <linux/wait.h>
 #include <linux/ptrace.h>
+#include <linux/tracehook.h>
 #include <linux/unistd.h>
 #include <linux/mm.h>
 #include <linux/tty.h>
 #include <linux/binfmts.h>
 #include <linux/bitops.h>
+#include <linux/tracehook.h>
 
 #include <asm/uaccess.h>
 #include <asm/ptrace.h>
@@ -574,6 +576,8 @@ static void do_signal(struct pt_regs *regs, unsigned long orig_i0)
                  * clear the TS_RESTORE_SIGMASK flag.
                  */
                 current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
+
+                tracehook_signal_handler(signr, &info, &ka, regs, 0);
                 return;
         }
         if (restart_syscall &&
@@ -605,4 +609,8 @@ void do_notify_resume(struct pt_regs *regs, unsigned long orig_i0, unsigned long
 {
         if (thread_info_flags & _TIF_SIGPENDING)
                 do_signal(regs, orig_i0);
+        if (thread_info_flags & _TIF_NOTIFY_RESUME) {
+                clear_thread_flag(TIF_NOTIFY_RESUME);
+                tracehook_notify_resume(regs);
+        }
 }
diff --git a/arch/sparc64/kernel/signal32.c b/arch/sparc64/kernel/signal32.c
index 97cdd1bf4a10..ba5b09ad6666 100644
--- a/arch/sparc64/kernel/signal32.c
+++ b/arch/sparc64/kernel/signal32.c
@@ -19,6 +19,7 @@
 #include <linux/binfmts.h>
 #include <linux/compat.h>
 #include <linux/bitops.h>
+#include <linux/tracehook.h>
 
 #include <asm/uaccess.h>
 #include <asm/ptrace.h>
@@ -794,6 +795,8 @@ void do_signal32(sigset_t *oldset, struct pt_regs * regs,
                  * clear the TS_RESTORE_SIGMASK flag.
                  */
                 current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
+
+                tracehook_signal_handler(signr, &info, &ka, regs, 0);
                 return;
         }
         if (restart_syscall &&
diff --git a/arch/sparc64/kernel/syscalls.S b/arch/sparc64/kernel/syscalls.S
index db19ed67acf6..a2f24270ed8a 100644
--- a/arch/sparc64/kernel/syscalls.S
+++ b/arch/sparc64/kernel/syscalls.S
@@ -162,6 +162,8 @@ linux_syscall_trace32:
         add     %sp, PTREGS_OFF, %o0
         call    syscall_trace
          clr    %o1
+        brnz,pn %o0, 3f
+         mov    -ENOSYS, %o0
         srl     %i0, 0, %o0
         srl     %i4, 0, %o4
         srl     %i1, 0, %o1
@@ -173,6 +175,8 @@ linux_syscall_trace:
         add     %sp, PTREGS_OFF, %o0
         call    syscall_trace
          clr    %o1
+        brnz,pn %o0, 3f
+         mov    -ENOSYS, %o0
         mov     %i0, %o0
         mov     %i1, %o1
         mov     %i2, %o2
diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c
index 5047490fc299..d741f35d7b3a 100644
--- a/arch/um/drivers/line.c
+++ b/arch/um/drivers/line.c
@@ -362,19 +362,7 @@ static irqreturn_t line_write_interrupt(int irq, void *data)
         if (tty == NULL)
                 return IRQ_NONE;
 
-        if (test_bit(TTY_DO_WRITE_WAKEUP, &tty->flags) &&
-           (tty->ldisc.write_wakeup != NULL))
-                (tty->ldisc.write_wakeup)(tty);
-
-        /*
-         * BLOCKING mode
-         * In blocking mode, everything sleeps on tty->write_wait.
-         * Sleeping in the console driver would break non-blocking
-         * writes.
-         */
-
-        if (waitqueue_active(&tty->write_wait))
-                wake_up_interruptible(&tty->write_wait);
+        tty_wakeup(tty);
         return IRQ_HANDLED;
 }
 
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index b6fa2877b173..3d0f2b6a5a16 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -30,6 +30,7 @@ config X86
         select HAVE_FTRACE
         select HAVE_KVM if ((X86_32 && !X86_VOYAGER && !X86_VISWS && !X86_NUMAQ) || X86_64)
         select HAVE_ARCH_KGDB if !X86_VOYAGER
+        select HAVE_GENERIC_DMA_COHERENT if X86_32
         select HAVE_EFFICIENT_UNALIGNED_ACCESS
 
 config ARCH_DEFCONFIG
diff --git a/arch/x86/kernel/acpi/cstate.c b/arch/x86/kernel/acpi/cstate.c
index 9220cf46aa10..c2502eb9aa83 100644
--- a/arch/x86/kernel/acpi/cstate.c
+++ b/arch/x86/kernel/acpi/cstate.c
@@ -73,7 +73,6 @@ int acpi_processor_ffh_cstate_probe(unsigned int cpu,
         struct cpuinfo_x86 *c = &cpu_data(cpu);
 
         cpumask_t saved_mask;
-        cpumask_of_cpu_ptr(new_mask, cpu);
         int retval;
         unsigned int eax, ebx, ecx, edx;
         unsigned int edx_part;
@@ -92,7 +91,7 @@ int acpi_processor_ffh_cstate_probe(unsigned int cpu,
 
         /* Make sure we are running on right CPU */
         saved_mask = current->cpus_allowed;
-        retval = set_cpus_allowed_ptr(current, new_mask);
+        retval = set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
         if (retval)
                 return -1;
 
diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 74697408576f..22d7d050905d 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -29,9 +29,6 @@
 
 #define CMD_SET_TYPE(cmd, t) ((cmd)->data[1] |= ((t) << 28))
 
-#define to_pages(addr, size) \
-         (round_up(((addr) & ~PAGE_MASK) + (size), PAGE_SIZE) >> PAGE_SHIFT)
-
 #define EXIT_LOOP_COUNT 10000000
 
 static DEFINE_RWLOCK(amd_iommu_devtable_lock);
@@ -185,7 +182,7 @@ static int iommu_flush_pages(struct amd_iommu *iommu, u16 domid,
                 u64 address, size_t size)
 {
         int s = 0;
-        unsigned pages = to_pages(address, size);
+        unsigned pages = iommu_num_pages(address, size);
 
         address &= PAGE_MASK;
 
@@ -557,8 +554,8 @@ static struct dma_ops_domain *dma_ops_domain_alloc(struct amd_iommu *iommu,
         if (iommu->exclusion_start &&
             iommu->exclusion_start < dma_dom->aperture_size) {
                 unsigned long startpage = iommu->exclusion_start >> PAGE_SHIFT;
-                int pages = to_pages(iommu->exclusion_start,
-                                iommu->exclusion_length);
+                int pages = iommu_num_pages(iommu->exclusion_start,
+                                            iommu->exclusion_length);
                 dma_ops_reserve_addresses(dma_dom, startpage, pages);
         }
 
@@ -767,7 +764,7 @@ static dma_addr_t __map_single(struct device *dev,
         unsigned int pages;
         int i;
 
-        pages = to_pages(paddr, size);
+        pages = iommu_num_pages(paddr, size);
         paddr &= PAGE_MASK;
 
         address = dma_ops_alloc_addresses(dev, dma_dom, pages);
@@ -802,7 +799,7 @@ static void __unmap_single(struct amd_iommu *iommu,
         if ((dma_addr == 0) || (dma_addr + size > dma_dom->aperture_size))
                 return;
 
-        pages = to_pages(dma_addr, size);
+        pages = iommu_num_pages(dma_addr, size);
         dma_addr &= PAGE_MASK;
         start = dma_addr;
 
diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
index ff2fff56f0a8..dd097b835839 100644
--- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
+++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
@@ -200,12 +200,10 @@ static void drv_read(struct drv_cmd *cmd)
 static void drv_write(struct drv_cmd *cmd)
 {
         cpumask_t saved_mask = current->cpus_allowed;
-        cpumask_of_cpu_ptr_declare(cpu_mask);
         unsigned int i;
 
         for_each_cpu_mask_nr(i, cmd->mask) {
-                cpumask_of_cpu_ptr_next(cpu_mask, i);
-                set_cpus_allowed_ptr(current, cpu_mask);
+                set_cpus_allowed_ptr(current, &cpumask_of_cpu(i));
                 do_drv_write(cmd);
         }
 
@@ -269,12 +267,11 @@ static unsigned int get_measured_perf(unsigned int cpu)
         } aperf_cur, mperf_cur;
 
         cpumask_t saved_mask;
-        cpumask_of_cpu_ptr(cpu_mask, cpu);
         unsigned int perf_percent;
         unsigned int retval;
 
         saved_mask = current->cpus_allowed;
-        set_cpus_allowed_ptr(current, cpu_mask);
+        set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
         if (get_cpu() != cpu) {
                 /* We were not able to run on requested processor */
                 put_cpu();
@@ -340,7 +337,6 @@ static unsigned int get_measured_perf(unsigned int cpu)
 
 static unsigned int get_cur_freq_on_cpu(unsigned int cpu)
 {
-        cpumask_of_cpu_ptr(cpu_mask, cpu);
         struct acpi_cpufreq_data *data = per_cpu(drv_data, cpu);
         unsigned int freq;
         unsigned int cached_freq;
@@ -353,7 +349,7 @@ static unsigned int get_cur_freq_on_cpu(unsigned int cpu)
         }
 
         cached_freq = data->freq_table[data->acpi_data->state].frequency;
-        freq = extract_freq(get_cur_val(cpu_mask), data);
+        freq = extract_freq(get_cur_val(&cpumask_of_cpu(cpu)), data);
         if (freq != cached_freq) {
                 /*
                  * The dreaded BIOS frequency change behind our back.
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
index 53c7b6936973..c45ca6d4dce1 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
@@ -479,12 +479,11 @@ static int core_voltage_post_transition(struct powernow_k8_data *data, u32 reqvi
 static int check_supported_cpu(unsigned int cpu)
 {
         cpumask_t oldmask;
-        cpumask_of_cpu_ptr(cpu_mask, cpu);
         u32 eax, ebx, ecx, edx;
         unsigned int rc = 0;
 
         oldmask = current->cpus_allowed;
-        set_cpus_allowed_ptr(current, cpu_mask);
+        set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
 
         if (smp_processor_id() != cpu) {
                 printk(KERN_ERR PFX "limiting to cpu %u failed\n", cpu);
@@ -1017,7 +1016,6 @@ static int transition_frequency_pstate(struct powernow_k8_data *data, unsigned i
 static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsigned relation)
 {
         cpumask_t oldmask;
-        cpumask_of_cpu_ptr(cpu_mask, pol->cpu);
         struct powernow_k8_data *data = per_cpu(powernow_data, pol->cpu);
         u32 checkfid;
         u32 checkvid;
@@ -1032,7 +1030,7 @@ static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsi
 
         /* only run on specific CPU from here on */
         oldmask = current->cpus_allowed;
-        set_cpus_allowed_ptr(current, cpu_mask);
+        set_cpus_allowed_ptr(current, &cpumask_of_cpu(pol->cpu));
 
         if (smp_processor_id() != pol->cpu) {
                 printk(KERN_ERR PFX "limiting to cpu %u failed\n", pol->cpu);
@@ -1107,7 +1105,6 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
 {
         struct powernow_k8_data *data;
         cpumask_t oldmask;
-        cpumask_of_cpu_ptr_declare(newmask);
         int rc;
 
         if (!cpu_online(pol->cpu))
@@ -1159,8 +1156,7 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
 
         /* only run on specific CPU from here on */
         oldmask = current->cpus_allowed;
-        cpumask_of_cpu_ptr_next(newmask, pol->cpu);
-        set_cpus_allowed_ptr(current, newmask);
+        set_cpus_allowed_ptr(current, &cpumask_of_cpu(pol->cpu));
 
         if (smp_processor_id() != pol->cpu) {
                 printk(KERN_ERR PFX "limiting to cpu %u failed\n", pol->cpu);
@@ -1182,7 +1178,7 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
         set_cpus_allowed_ptr(current, &oldmask);
 
         if (cpu_family == CPU_HW_PSTATE)
-                pol->cpus = *newmask;
+                pol->cpus = cpumask_of_cpu(pol->cpu);
         else
                 pol->cpus = per_cpu(cpu_core_map, pol->cpu);
         data->available_cores = &(pol->cpus);
@@ -1248,7 +1244,6 @@ static unsigned int powernowk8_get (unsigned int cpu)
 {
         struct powernow_k8_data *data;
         cpumask_t oldmask = current->cpus_allowed;
-        cpumask_of_cpu_ptr(newmask, cpu);
         unsigned int khz = 0;
         unsigned int first;
 
@@ -1258,7 +1253,7 @@ static unsigned int powernowk8_get (unsigned int cpu)
         if (!data)
                 return -EINVAL;
 
-        set_cpus_allowed_ptr(current, newmask);
+        set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
         if (smp_processor_id() != cpu) {
                 printk(KERN_ERR PFX
                         "limiting to CPU %d failed in powernowk8_get\n", cpu);
diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c
index ca2ac13b7af2..15e13c01cc36 100644
--- a/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c
+++ b/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c
@@ -324,10 +324,9 @@ static unsigned int get_cur_freq(unsigned int cpu)
         unsigned l, h;
         unsigned clock_freq;
         cpumask_t saved_mask;
-        cpumask_of_cpu_ptr(new_mask, cpu);
 
         saved_mask = current->cpus_allowed;
-        set_cpus_allowed_ptr(current, new_mask);
+        set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
         if (smp_processor_id() != cpu)
                 return 0;
 
@@ -585,15 +584,12 @@ static int centrino_target (struct cpufreq_policy *policy,
                  * Best effort undo..
                  */
 
-                if (!cpus_empty(*covered_cpus)) {
-                        cpumask_of_cpu_ptr_declare(new_mask);
-
+                if (!cpus_empty(*covered_cpus))
                         for_each_cpu_mask_nr(j, *covered_cpus) {
-                                cpumask_of_cpu_ptr_next(new_mask, j);
-                                set_cpus_allowed_ptr(current, new_mask);
+                                set_cpus_allowed_ptr(current,
+                                                     &cpumask_of_cpu(j));
                                 wrmsr(MSR_IA32_PERF_CTL, oldmsr, h);
                         }
-                }
 
                 tmp = freqs.new;
                 freqs.new = freqs.old;
diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c b/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c
index 2f3728dc24f6..191f7263c61d 100644
--- a/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c
+++ b/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c
@@ -244,8 +244,7 @@ static unsigned int _speedstep_get(const cpumask_t *cpus)
 
 static unsigned int speedstep_get(unsigned int cpu)
 {
-        cpumask_of_cpu_ptr(newmask, cpu);
-        return _speedstep_get(newmask);
+        return _speedstep_get(&cpumask_of_cpu(cpu));
 }
 
 /**
diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c
index 650d40f7912b..6b0a10b002f1 100644
--- a/arch/x86/kernel/cpu/intel_cacheinfo.c
+++ b/arch/x86/kernel/cpu/intel_cacheinfo.c
@@ -516,7 +516,6 @@ static int __cpuinit detect_cache_attributes(unsigned int cpu)
         unsigned long           j;
         int                     retval;
         cpumask_t               oldmask;
-        cpumask_of_cpu_ptr(newmask, cpu);
 
         if (num_cache_leaves == 0)
                 return -ENOENT;
@@ -527,7 +526,7 @@ static int __cpuinit detect_cache_attributes(unsigned int cpu)
                 return -ENOMEM;
 
         oldmask = current->cpus_allowed;
-        retval = set_cpus_allowed_ptr(current, newmask);
+        retval = set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
         if (retval)
                 goto out;
 
diff --git a/arch/x86/kernel/genapic_64.c b/arch/x86/kernel/genapic_64.c
index 1fa8be5bd217..eaff0bbb1444 100644
--- a/arch/x86/kernel/genapic_64.c
+++ b/arch/x86/kernel/genapic_64.c
@@ -99,3 +99,4 @@ int is_uv_system(void)
 {
         return uv_system_type != UV_NONE;
 }
+EXPORT_SYMBOL_GPL(is_uv_system);
diff --git a/arch/x86/kernel/ldt.c b/arch/x86/kernel/ldt.c
index 3fee2aa50f3f..b68e21f06f4f 100644
--- a/arch/x86/kernel/ldt.c
+++ b/arch/x86/kernel/ldt.c
@@ -62,12 +62,10 @@ static int alloc_ldt(mm_context_t *pc, int mincount, int reload)
 
         if (reload) {
 #ifdef CONFIG_SMP
-                cpumask_of_cpu_ptr_declare(mask);
-
                 preempt_disable();
                 load_LDT(pc);
-                cpumask_of_cpu_ptr_next(mask, smp_processor_id());
-                if (!cpus_equal(current->mm->cpu_vm_mask, *mask))
+                if (!cpus_equal(current->mm->cpu_vm_mask,
+                                cpumask_of_cpu(smp_processor_id())))
                         smp_call_function(flush_ldt, current->mm, 1);
                 preempt_enable();
 #else
diff --git a/arch/x86/kernel/microcode.c b/arch/x86/kernel/microcode.c
index 6994c751590e..652fa5c38ebe 100644
--- a/arch/x86/kernel/microcode.c
+++ b/arch/x86/kernel/microcode.c
@@ -388,7 +388,6 @@ static int do_microcode_update (void)
         void *new_mc = NULL;
         int cpu;
         cpumask_t old;
-        cpumask_of_cpu_ptr_declare(newmask);
 
         old = current->cpus_allowed;
 
@@ -405,8 +404,7 @@ static int do_microcode_update (void)
 
                         if (!uci->valid)
                                 continue;
-                        cpumask_of_cpu_ptr_next(newmask, cpu);
-                        set_cpus_allowed_ptr(current, newmask);
+                        set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
                         error = get_maching_microcode(new_mc, cpu);
                         if (error < 0)
                                 goto out;
@@ -576,7 +574,6 @@ static int apply_microcode_check_cpu(int cpu)
         struct cpuinfo_x86 *c = &cpu_data(cpu);
         struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
         cpumask_t old;
-        cpumask_of_cpu_ptr(newmask, cpu);
         unsigned int val[2];
         int err = 0;
 
@@ -585,7 +582,7 @@ static int apply_microcode_check_cpu(int cpu)
                 return 0;
 
         old = current->cpus_allowed;
-        set_cpus_allowed_ptr(current, newmask);
+        set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
 
         /* Check if the microcode we have in memory matches the CPU */
         if (c->x86_vendor != X86_VENDOR_INTEL || c->x86 < 6 ||
@@ -623,12 +620,11 @@ static int apply_microcode_check_cpu(int cpu)
 static void microcode_init_cpu(int cpu, int resume)
 {
         cpumask_t old;
-        cpumask_of_cpu_ptr(newmask, cpu);
         struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
 
         old = current->cpus_allowed;
 
-        set_cpus_allowed_ptr(current, newmask);
+        set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
         mutex_lock(&microcode_mutex);
         collect_cpu_info(cpu);
         if (uci->valid && system_state == SYSTEM_RUNNING && !resume)
@@ -661,13 +657,10 @@ static ssize_t reload_store(struct sys_device *dev,
         if (end == buf)
                 return -EINVAL;
         if (val == 1) {
-                cpumask_t old;
-                cpumask_of_cpu_ptr(newmask, cpu);
-
-                old = current->cpus_allowed;
+                cpumask_t old = current->cpus_allowed;
 
                 get_online_cpus();
-                set_cpus_allowed_ptr(current, newmask);
+                set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
 
                 mutex_lock(&microcode_mutex);
                 if (uci->valid)
diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c
index 37544123896d..87d4d6964ec2 100644
--- a/arch/x86/kernel/pci-dma.c
+++ b/arch/x86/kernel/pci-dma.c
@@ -123,6 +123,14 @@ void __init pci_iommu_alloc(void)
 
         pci_swiotlb_init();
 }
+
+unsigned long iommu_num_pages(unsigned long addr, unsigned long len)
+{
+        unsigned long size = roundup((addr & ~PAGE_MASK) + len, PAGE_SIZE);
+
+        return size >> PAGE_SHIFT;
+}
+EXPORT_SYMBOL(iommu_num_pages);
 #endif
 
 /*
@@ -192,124 +200,6 @@ static __init int iommu_setup(char *p)
 }
 early_param("iommu", iommu_setup);
 
-#ifdef CONFIG_X86_32
-int dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr,
-                                dma_addr_t device_addr, size_t size, int flags)
-{
-        void __iomem *mem_base = NULL;
-        int pages = size >> PAGE_SHIFT;
-        int bitmap_size = BITS_TO_LONGS(pages) * sizeof(long);
-
-        if ((flags & (DMA_MEMORY_MAP | DMA_MEMORY_IO)) == 0)
-                goto out;
-        if (!size)
-                goto out;
-        if (dev->dma_mem)
-                goto out;
-
-        /* FIXME: this routine just ignores DMA_MEMORY_INCLUDES_CHILDREN */
-
-        mem_base = ioremap(bus_addr, size);
-        if (!mem_base)
-                goto out;
-
-        dev->dma_mem = kzalloc(sizeof(struct dma_coherent_mem), GFP_KERNEL);
-        if (!dev->dma_mem)
-                goto out;
-        dev->dma_mem->bitmap = kzalloc(bitmap_size, GFP_KERNEL);
-        if (!dev->dma_mem->bitmap)
-                goto free1_out;
-
-        dev->dma_mem->virt_base = mem_base;
-        dev->dma_mem->device_base = device_addr;
-        dev->dma_mem->size = pages;
-        dev->dma_mem->flags = flags;
-
-        if (flags & DMA_MEMORY_MAP)
-                return DMA_MEMORY_MAP;
-
-        return DMA_MEMORY_IO;
-
- free1_out:
-        kfree(dev->dma_mem);
- out:
-        if (mem_base)
-                iounmap(mem_base);
-        return 0;
-}
-EXPORT_SYMBOL(dma_declare_coherent_memory);
-
-void dma_release_declared_memory(struct device *dev)
-{
-        struct dma_coherent_mem *mem = dev->dma_mem;
-
-        if (!mem)
-                return;
-        dev->dma_mem = NULL;
-        iounmap(mem->virt_base);
-        kfree(mem->bitmap);
-        kfree(mem);
-}
-EXPORT_SYMBOL(dma_release_declared_memory);
-
-void *dma_mark_declared_memory_occupied(struct device *dev,
-                                        dma_addr_t device_addr, size_t size)
-{
-        struct dma_coherent_mem *mem = dev->dma_mem;
-        int pos, err;
-        int pages = (size + (device_addr & ~PAGE_MASK) + PAGE_SIZE - 1);
-
-        pages >>= PAGE_SHIFT;
-
-        if (!mem)
-                return ERR_PTR(-EINVAL);
-
-        pos = (device_addr - mem->device_base) >> PAGE_SHIFT;
-        err = bitmap_allocate_region(mem->bitmap, pos, get_order(pages));
-        if (err != 0)
-                return ERR_PTR(err);
-        return mem->virt_base + (pos << PAGE_SHIFT);
-}
-EXPORT_SYMBOL(dma_mark_declared_memory_occupied);
-
-static int dma_alloc_from_coherent_mem(struct device *dev, ssize_t size,
-                                       dma_addr_t *dma_handle, void **ret)
-{
-        struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL;
-        int order = get_order(size);
-
-        if (mem) {
-                int page = bitmap_find_free_region(mem->bitmap, mem->size,
-                                                     order);
-                if (page >= 0) {
-                        *dma_handle = mem->device_base + (page << PAGE_SHIFT);
-                        *ret = mem->virt_base + (page << PAGE_SHIFT);
-                        memset(*ret, 0, size);
-                }
-                if (mem->flags & DMA_MEMORY_EXCLUSIVE)
-                        *ret = NULL;
-        }
-        return (mem != NULL);
-}
-
-static int dma_release_coherent(struct device *dev, int order, void *vaddr)
-{
-        struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL;
-
-        if (mem && vaddr >= mem->virt_base && vaddr <
-                   (mem->virt_base + (mem->size << PAGE_SHIFT))) {
-                int page = (vaddr - mem->virt_base) >> PAGE_SHIFT;
-
-                bitmap_release_region(mem->bitmap, page, order);
-                return 1;
-        }
-        return 0;
-}
-#else
-#define dma_alloc_from_coherent_mem(dev, size, handle, ret) (0)
-#define dma_release_coherent(dev, order, vaddr) (0)
-#endif /* CONFIG_X86_32 */
-
 int dma_supported(struct device *dev, u64 mask)
 {
         struct dma_mapping_ops *ops = get_dma_ops(dev);
@@ -379,7 +269,7 @@ dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
         /* ignore region specifiers */
         gfp &= ~(__GFP_DMA | __GFP_HIGHMEM | __GFP_DMA32);
 
-        if (dma_alloc_from_coherent_mem(dev, size, dma_handle, &memory))
+        if (dma_alloc_from_coherent(dev, size, dma_handle, &memory))
                 return memory;
 
         if (!dev) {
@@ -484,7 +374,7 @@ void dma_free_coherent(struct device *dev, size_t size,
 
         int order = get_order(size);
         WARN_ON(irqs_disabled());       /* for portability */
-        if (dma_release_coherent(dev, order, vaddr))
+        if (dma_release_from_coherent(dev, order, vaddr))
                 return;
         if (ops->unmap_single)
                 ops->unmap_single(dev, bus, size, 0);
diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c
index 744126e64950..49285f8fd4d5 100644
--- a/arch/x86/kernel/pci-gart_64.c
+++ b/arch/x86/kernel/pci-gart_64.c
@@ -67,9 +67,6 @@ static u32 gart_unmapped_entry;
         (((x) & 0xfffff000) | (((x) >> 32) << 4) | GPTE_VALID | GPTE_COHERENT)
 #define GPTE_DECODE(x) (((x) & 0xfffff000) | (((u64)(x) & 0xff0) << 28))
 
-#define to_pages(addr, size) \
-        (round_up(((addr) & ~PAGE_MASK) + (size), PAGE_SIZE) >> PAGE_SHIFT)
-
 #define EMERGENCY_PAGES 32 /* = 128KB */
 
 #ifdef CONFIG_AGP
@@ -241,7 +238,7 @@ nonforced_iommu(struct device *dev, unsigned long addr, size_t size)
 static dma_addr_t dma_map_area(struct device *dev, dma_addr_t phys_mem,
                                 size_t size, int dir)
 {
-        unsigned long npages = to_pages(phys_mem, size);
+        unsigned long npages = iommu_num_pages(phys_mem, size);
         unsigned long iommu_page = alloc_iommu(dev, npages);
         int i;
 
@@ -304,7 +301,7 @@ static void gart_unmap_single(struct device *dev, dma_addr_t dma_addr,
                 return;
 
         iommu_page = (dma_addr - iommu_bus_base)>>PAGE_SHIFT;
-        npages = to_pages(dma_addr, size);
+        npages = iommu_num_pages(dma_addr, size);
         for (i = 0; i < npages; i++) {
                 iommu_gatt_base[iommu_page + i] = gart_unmapped_entry;
                 CLEAR_LEAK(iommu_page + i);
@@ -387,7 +384,7 @@ static int __dma_map_cont(struct device *dev, struct scatterlist *start,
                 }
 
                 addr = phys_addr;
-                pages = to_pages(s->offset, s->length);
+                pages = iommu_num_pages(s->offset, s->length);
                 while (pages--) {
                         iommu_gatt_base[iommu_page] = GPTE_ENCODE(addr);
                         SET_LEAK(iommu_page);
@@ -470,7 +467,7 @@ gart_map_sg(struct device *dev, struct scatterlist *sg, int nents, int dir)
 
                 seg_size += s->length;
                 need = nextneed;
-                pages += to_pages(s->offset, s->length);
+                pages += iommu_num_pages(s->offset, s->length);
                 ps = s;
         }
         if (dma_map_cont(dev, start_sg, i - start, sgmap, pages, need) < 0)
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index 06a9f643817e..724adfc63cb9 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -414,25 +414,20 @@ void native_machine_shutdown(void)
 
         /* The boot cpu is always logical cpu 0 */
         int reboot_cpu_id = 0;
-        cpumask_of_cpu_ptr(newmask, reboot_cpu_id);
 
 #ifdef CONFIG_X86_32
         /* See if there has been given a command line override */
         if ((reboot_cpu != -1) && (reboot_cpu < NR_CPUS) &&
-                cpu_online(reboot_cpu)) {
+                cpu_online(reboot_cpu))
                 reboot_cpu_id = reboot_cpu;
-                cpumask_of_cpu_ptr_next(newmask, reboot_cpu_id);
-        }
 #endif
 
         /* Make certain the cpu I'm about to reboot on is online */
-        if (!cpu_online(reboot_cpu_id)) {
+        if (!cpu_online(reboot_cpu_id))
                 reboot_cpu_id = smp_processor_id();
-                cpumask_of_cpu_ptr_next(newmask, reboot_cpu_id);
-        }
 
         /* Make certain I only run on the appropriate processor */
-        set_cpus_allowed_ptr(current, newmask);
+        set_cpus_allowed_ptr(current, &cpumask_of_cpu(reboot_cpu_id));
 
         /* O.K Now that I'm on the appropriate processor,
          * stop all of the others.
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index b520dae02bf4..2d888586385d 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -788,10 +788,6 @@ void __init setup_arch(char **cmdline_p)
 
         initmem_init(0, max_pfn);
 
-#ifdef CONFIG_X86_64
-        dma32_reserve_bootmem();
-#endif
-
 #ifdef CONFIG_ACPI_SLEEP
         /*
          * Reserve low memory region for sleep support.
@@ -806,6 +802,15 @@ void __init setup_arch(char **cmdline_p)
 #endif
         reserve_crashkernel();
 
+#ifdef CONFIG_X86_64
+        /*
+         * dma32_reserve_bootmem() allocates bootmem which may conflict
+         * with the crashkernel command line, so do that after
+         * reserve_crashkernel()
+         */
+        dma32_reserve_bootmem();
+#endif
+
         reserve_ibft_region();
 
 #ifdef CONFIG_KVM_CLOCK
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index f7745f94c006..76e305e064f9 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -80,24 +80,6 @@ static void __init setup_per_cpu_maps(void)
 #endif
 }
 
-#ifdef CONFIG_HAVE_CPUMASK_OF_CPU_MAP
-cpumask_t *cpumask_of_cpu_map __read_mostly;
-EXPORT_SYMBOL(cpumask_of_cpu_map);
-
-/* requires nr_cpu_ids to be initialized */
-static void __init setup_cpumask_of_cpu(void)
-{
-        int i;
-
-        /* alloc_bootmem zeroes memory */
-        cpumask_of_cpu_map = alloc_bootmem_low(sizeof(cpumask_t) * nr_cpu_ids);
-        for (i = 0; i < nr_cpu_ids; i++)
-                cpu_set(i, cpumask_of_cpu_map[i]);
-}
-#else
-static inline void setup_cpumask_of_cpu(void) { }
-#endif
-
 #ifdef CONFIG_X86_32
 /*
  * Great future not-so-futuristic plan: make i386 and x86_64 do it
@@ -197,9 +179,6 @@ void __init setup_per_cpu_areas(void)
 
         /* Setup node to cpumask map */
         setup_node_to_cpumask_map();
-
-        /* Setup cpumask_of_cpu map */
-        setup_cpumask_of_cpu();
 }
 
 #endif
diff --git a/arch/x86/kvm/Kconfig b/arch/x86/kvm/Kconfig
index 8d45fabc5f3b..ce3251ce5504 100644
--- a/arch/x86/kvm/Kconfig
+++ b/arch/x86/kvm/Kconfig
@@ -21,6 +21,7 @@ config KVM
         tristate "Kernel-based Virtual Machine (KVM) support"
         depends on HAVE_KVM
         select PREEMPT_NOTIFIERS
+        select MMU_NOTIFIER
         select ANON_INODES
         ---help---
           Support hosting fully virtualized guest machines using hardware
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index 0313a5eec412..d9249a882aa5 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -1014,6 +1014,9 @@ __init void lguest_init(void)
         init_pg_tables_start = __pa(pg0);
         init_pg_tables_end = __pa(pg0);
 
+        /* As described in head_32.S, we map the first 128M of memory. */
+        max_pfn_mapped = (128*1024*1024) >> PAGE_SHIFT;
+
         /* Load the %fs segment register (the per-cpu segment register) with
          * the normal data segment to get through booting. */
         asm volatile ("mov %0, %%fs" : : "r" (__KERNEL_DS) : "memory");
diff --git a/arch/x86/lib/copy_user_64.S b/arch/x86/lib/copy_user_64.S
index dfdf428975c0..f118c110af32 100644
--- a/arch/x86/lib/copy_user_64.S
+++ b/arch/x86/lib/copy_user_64.S
@@ -52,7 +52,7 @@
         jnz 100b
 102:
         .section .fixup,"ax"
-103:    addl %r8d,%edx                  /* ecx is zerorest also */
+103:    addl %ecx,%edx                  /* ecx is zerorest also */
         jmp copy_user_handle_tail
         .previous
 
diff --git a/arch/x86/lib/copy_user_nocache_64.S b/arch/x86/lib/copy_user_nocache_64.S
index 40e0e309d27e..cb0c112386fb 100644
--- a/arch/x86/lib/copy_user_nocache_64.S
+++ b/arch/x86/lib/copy_user_nocache_64.S
@@ -32,7 +32,7 @@
         jnz 100b
 102:
         .section .fixup,"ax"
-103:    addl %r8d,%edx                  /* ecx is zerorest also */
+103:    addl %ecx,%edx                  /* ecx is zerorest also */
         jmp copy_user_handle_tail
         .previous
 
@@ -108,7 +108,6 @@ ENTRY(__copy_user_nocache)
         jmp 60f
 50:     movl %ecx,%edx
 60:     sfence
-        movl %r8d,%ecx
         jmp copy_user_handle_tail
         .previous
 
diff --git a/arch/x86/mm/gup.c b/arch/x86/mm/gup.c
index 3085f25b4355..007bb06c7504 100644
--- a/arch/x86/mm/gup.c
+++ b/arch/x86/mm/gup.c
@@ -223,14 +223,17 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write,
                         struct page **pages)
 {
         struct mm_struct *mm = current->mm;
-        unsigned long end = start + (nr_pages << PAGE_SHIFT);
-        unsigned long addr = start;
+        unsigned long addr, len, end;
         unsigned long next;
         pgd_t *pgdp;
         int nr = 0;
 
+        start &= PAGE_MASK;
+        addr = start;
+        len = (unsigned long) nr_pages << PAGE_SHIFT;
+        end = start + len;
         if (unlikely(!access_ok(write ? VERIFY_WRITE : VERIFY_READ,
-                                        start, nr_pages*PAGE_SIZE)))
+                                        start, len)))
                 goto slow_irqon;
 
         /*
diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c
index ff3a6a336342..4bdaa590375d 100644
--- a/arch/x86/pci/fixup.c
+++ b/arch/x86/pci/fixup.c
@@ -23,7 +23,8 @@ static void __devinit pci_fixup_i450nx(struct pci_dev *d)
                 pci_read_config_byte(d, reg++, &busno);
                 pci_read_config_byte(d, reg++, &suba);
                 pci_read_config_byte(d, reg++, &subb);
-                DBG("i450NX PXB %d: %02x/%02x/%02x\n", pxb, busno, suba, subb);
+                dev_dbg(&d->dev, "i450NX PXB %d: %02x/%02x/%02x\n", pxb, busno,
+                        suba, subb);
                 if (busno)
                         pci_scan_bus_with_sysdata(busno);       /* Bus A */
                 if (suba < subb)
diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c
index a09505806b82..5807d1bc73f7 100644
--- a/arch/x86/pci/i386.c
+++ b/arch/x86/pci/i386.c
@@ -128,10 +128,8 @@ static void __init pcibios_allocate_bus_resources(struct list_head *bus_list)
                                 pr = pci_find_parent_resource(dev, r);
                                 if (!r->start || !pr ||
                                     request_resource(pr, r) < 0) {
-                                        printk(KERN_ERR "PCI: Cannot allocate "
-                                                "resource region %d "
-                                                "of bridge %s\n",
-                                                idx, pci_name(dev));
+                                        dev_err(&dev->dev, "BAR %d: can't "
+                                                "allocate resource\n", idx);
                                         /*
                                          * Something is wrong with the region.
                                          * Invalidate the resource to prevent
@@ -166,15 +164,15 @@ static void __init pcibios_allocate_resources(int pass)
                         else
                                 disabled = !(command & PCI_COMMAND_MEMORY);
                         if (pass == disabled) {
-                                DBG("PCI: Resource %08lx-%08lx "
-                                    "(f=%lx, d=%d, p=%d)\n",
-                                    r->start, r->end, r->flags, disabled, pass);
+                                dev_dbg(&dev->dev, "resource %#08llx-%#08llx "
+                                        "(f=%lx, d=%d, p=%d)\n",
+                                        (unsigned long long) r->start,
+                                        (unsigned long long) r->end,
+                                        r->flags, disabled, pass);
                                 pr = pci_find_parent_resource(dev, r);
                                 if (!pr || request_resource(pr, r) < 0) {
-                                        printk(KERN_ERR "PCI: Cannot allocate "
-                                                "resource region %d "
-                                                "of device %s\n",
-                                                idx, pci_name(dev));
+                                        dev_err(&dev->dev, "BAR %d: can't "
+                                                "allocate resource\n", idx);
                                         /* We'll assign a new address later */
                                         r->end -= r->start;
                                         r->start = 0;
@@ -187,8 +185,7 @@ static void __init pcibios_allocate_resources(int pass)
                                 /* Turn the ROM off, leave the resource region,
                                  * but keep it unregistered. */
                                 u32 reg;
-                                DBG("PCI: Switching off ROM of %s\n",
-                                        pci_name(dev));
+                                dev_dbg(&dev->dev, "disabling ROM\n");
                                 r->flags &= ~IORESOURCE_ROM_ENABLE;
                                 pci_read_config_dword(dev,
                                                 dev->rom_base_reg, &reg);
@@ -257,8 +254,7 @@ void pcibios_set_master(struct pci_dev *dev)
                 lat = pcibios_max_latency;
         else
                 return;
-        printk(KERN_DEBUG "PCI: Setting latency timer of device %s to %d\n",
-                pci_name(dev), lat);
+        dev_printk(KERN_DEBUG, &dev->dev, "setting latency timer to %d\n", lat);
         pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
 }
 
diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c
index 6a06a2eb0597..fec0123b33a9 100644
--- a/arch/x86/pci/irq.c
+++ b/arch/x86/pci/irq.c
@@ -436,7 +436,7 @@ static int pirq_vlsi_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
 {
         WARN_ON_ONCE(pirq >= 9);
         if (pirq > 8) {
-                printk(KERN_INFO "VLSI router pirq escape (%d)\n", pirq);
+                dev_info(&dev->dev, "VLSI router PIRQ escape (%d)\n", pirq);
                 return 0;
         }
         return read_config_nybble(router, 0x74, pirq-1);
@@ -446,7 +446,7 @@ static int pirq_vlsi_set(struct pci_dev *router, struct pci_dev *dev, int pirq,
 {
         WARN_ON_ONCE(pirq >= 9);
         if (pirq > 8) {
-                printk(KERN_INFO "VLSI router pirq escape (%d)\n", pirq);
+                dev_info(&dev->dev, "VLSI router PIRQ escape (%d)\n", pirq);
                 return 0;
         }
         write_config_nybble(router, 0x74, pirq-1, irq);
@@ -492,15 +492,17 @@ static int pirq_amd756_get(struct pci_dev *router, struct pci_dev *dev, int pirq
         irq = 0;
         if (pirq <= 4)
                 irq = read_config_nybble(router, 0x56, pirq - 1);
-        printk(KERN_INFO "AMD756: dev %04x:%04x, router pirq : %d get irq : %2d\n",
-                dev->vendor, dev->device, pirq, irq);
+        dev_info(&dev->dev,
+                 "AMD756: dev [%04x/%04x], router PIRQ %d get IRQ %d\n",
+                 dev->vendor, dev->device, pirq, irq);
         return irq;
 }
 
 static int pirq_amd756_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
 {
-        printk(KERN_INFO "AMD756: dev %04x:%04x, router pirq : %d SET irq : %2d\n",
-                dev->vendor, dev->device, pirq, irq);
+        dev_info(&dev->dev,
+                 "AMD756: dev [%04x/%04x], router PIRQ %d set IRQ %d\n",
+                 dev->vendor, dev->device, pirq, irq);
         if (pirq <= 4)
                 write_config_nybble(router, 0x56, pirq - 1, irq);
         return 1;
@@ -730,7 +732,6 @@ static __init int ali_router_probe(struct irq_router *r, struct pci_dev *router,
         switch (device) {
         case PCI_DEVICE_ID_AL_M1533:
         case PCI_DEVICE_ID_AL_M1563:
-                printk(KERN_DEBUG "PCI: Using ALI IRQ Router\n");
                 r->name = "ALI";
                 r->get = pirq_ali_get;
                 r->set = pirq_ali_set;
@@ -840,11 +841,9 @@ static void __init pirq_find_router(struct irq_router *r)
                         h->probe(r, pirq_router_dev, pirq_router_dev->device))
                         break;
         }
-        printk(KERN_INFO "PCI: Using IRQ router %s [%04x/%04x] at %s\n",
-                pirq_router.name,
-                pirq_router_dev->vendor,
-                pirq_router_dev->device,
-                pci_name(pirq_router_dev));
+        dev_info(&pirq_router_dev->dev, "%s IRQ router [%04x/%04x]\n",
+                 pirq_router.name,
+                 pirq_router_dev->vendor, pirq_router_dev->device);
 
         /* The device remains referenced for the kernel lifetime */
 }
@@ -877,7 +876,7 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
         /* Find IRQ pin */
         pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
         if (!pin) {
-                DBG(KERN_DEBUG " -> no interrupt pin\n");
+                dev_dbg(&dev->dev, "no interrupt pin\n");
                 return 0;
         }
         pin = pin - 1;
@@ -887,20 +886,20 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
         if (!pirq_table)
                 return 0;
 
-        DBG(KERN_DEBUG "IRQ for %s[%c]", pci_name(dev), 'A' + pin);
         info = pirq_get_info(dev);
         if (!info) {
-                DBG(" -> not found in routing table\n" KERN_DEBUG);
+                dev_dbg(&dev->dev, "PCI INT %c not found in routing table\n",
+                        'A' + pin);
                 return 0;
         }
         pirq = info->irq[pin].link;
         mask = info->irq[pin].bitmap;
         if (!pirq) {
-                DBG(" -> not routed\n" KERN_DEBUG);
+                dev_dbg(&dev->dev, "PCI INT %c not routed\n", 'A' + pin);
                 return 0;
         }
-        DBG(" -> PIRQ %02x, mask %04x, excl %04x", pirq, mask,
-                pirq_table->exclusive_irqs);
+        dev_dbg(&dev->dev, "PCI INT %c -> PIRQ %02x, mask %04x, excl %04x",
+                'A' + pin, pirq, mask, pirq_table->exclusive_irqs);
         mask &= pcibios_irq_mask;
 
         /* Work around broken HP Pavilion Notebooks which assign USB to
@@ -930,10 +929,8 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
                 if (pci_probe & PCI_USE_PIRQ_MASK)
                         newirq = 0;
                 else
-                        printk("\n" KERN_WARNING
-                                "PCI: IRQ %i for device %s doesn't match PIRQ mask - try pci=usepirqmask\n"
-                                KERN_DEBUG, newirq,
-                                pci_name(dev));
+                        dev_warn(&dev->dev, "IRQ %d doesn't match PIRQ mask "
+                                 "%#x; try pci=usepirqmask\n", newirq, mask);
         }
         if (!newirq && assign) {
                 for (i = 0; i < 16; i++) {
@@ -944,39 +941,35 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
                                 newirq = i;
                 }
         }
-        DBG(" -> newirq=%d", newirq);
+        dev_dbg(&dev->dev, "PCI INT %c -> newirq %d", 'A' + pin, newirq);
 
         /* Check if it is hardcoded */
         if ((pirq & 0xf0) == 0xf0) {
                 irq = pirq & 0xf;
-                DBG(" -> hardcoded IRQ %d\n", irq);
-                msg = "Hardcoded";
+                msg = "hardcoded";
         } else if (r->get && (irq = r->get(pirq_router_dev, dev, pirq)) && \
         ((!(pci_probe & PCI_USE_PIRQ_MASK)) || ((1 << irq) & mask))) {
-                DBG(" -> got IRQ %d\n", irq);
-                msg = "Found";
+                msg = "found";
                 eisa_set_level_irq(irq);
         } else if (newirq && r->set &&
                 (dev->class >> 8) != PCI_CLASS_DISPLAY_VGA) {
-                DBG(" -> assigning IRQ %d", newirq);
                 if (r->set(pirq_router_dev, dev, pirq, newirq)) {
                         eisa_set_level_irq(newirq);
-                        DBG(" ... OK\n");
-                        msg = "Assigned";
+                        msg = "assigned";
                         irq = newirq;
                 }
         }
 
         if (!irq) {
-                DBG(" ... failed\n");
                 if (newirq && mask == (1 << newirq)) {
-                        msg = "Guessed";
+                        msg = "guessed";
                         irq = newirq;
-                } else
+                } else {
+                        dev_dbg(&dev->dev, "can't route interrupt\n");
                         return 0;
+                }
         }
-        printk(KERN_INFO "PCI: %s IRQ %d for device %s\n", msg, irq,
-                pci_name(dev));
+        dev_info(&dev->dev, "%s PCI INT %c -> IRQ %d\n", msg, 'A' + pin, irq);
 
         /* Update IRQ for all devices with the same pirq value */
         while ((dev2 = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev2)) != NULL) {
@@ -996,17 +989,17 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
                         (!(pci_probe & PCI_USE_PIRQ_MASK) || \
                         ((1 << dev2->irq) & mask))) {
 #ifndef CONFIG_PCI_MSI
-                                printk(KERN_INFO "IRQ routing conflict for %s, have irq %d, want irq %d\n",
-                                       pci_name(dev2), dev2->irq, irq);
+                                dev_info(&dev2->dev, "IRQ routing conflict: "
+                                         "have IRQ %d, want IRQ %d\n",
+                                         dev2->irq, irq);
 #endif
                                 continue;
                         }
                         dev2->irq = irq;
                         pirq_penalty[irq]++;
                         if (dev != dev2)
-                                printk(KERN_INFO
-                                        "PCI: Sharing IRQ %d with %s\n",
-                                        irq, pci_name(dev2));
+                                dev_info(&dev->dev, "sharing IRQ %d with %s\n",
+                                         irq, pci_name(dev2));
                 }
         }
         return 1;
@@ -1025,8 +1018,7 @@ static void __init pcibios_fixup_irqs(void)
                  * already in use.
                  */
                 if (dev->irq >= 16) {
-                        DBG(KERN_DEBUG "%s: ignoring bogus IRQ %d\n",
-                                pci_name(dev), dev->irq);
+                        dev_dbg(&dev->dev, "ignoring bogus IRQ %d\n", dev->irq);
                         dev->irq = 0;
                 }
                 /*
@@ -1070,12 +1062,12 @@ static void __init pcibios_fixup_irqs(void)
                                         irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number,
                                                         PCI_SLOT(bridge->devfn), pin);
                                         if (irq >= 0)
-                                                printk(KERN_WARNING "PCI: using PPB %s[%c] to get irq %d\n",
-                                                        pci_name(bridge), 'A' + pin, irq);
+                                                dev_warn(&dev->dev, "using bridge %s INT %c to get IRQ %d\n",
+                                                         pci_name(bridge),
+                                                         'A' + pin, irq);
                                 }
                                 if (irq >= 0) {
-                                        printk(KERN_INFO "PCI->APIC IRQ transform: %s[%c] -> IRQ %d\n",
-                                                pci_name(dev), 'A' + pin, irq);
+                                        dev_info(&dev->dev, "PCI->APIC IRQ transform: INT %c -> IRQ %d\n", 'A' + pin, irq);
                                         dev->irq = irq;
                                 }
                         }
@@ -1231,25 +1223,24 @@ static int pirq_enable_irq(struct pci_dev *dev)
                                 irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number,
                                                 PCI_SLOT(bridge->devfn), pin);
                                 if (irq >= 0)
-                                        printk(KERN_WARNING
-                                                "PCI: using PPB %s[%c] to get irq %d\n",
-                                                pci_name(bridge),
-                                                'A' + pin, irq);
+                                        dev_warn(&dev->dev, "using bridge %s "
+                                                 "INT %c to get IRQ %d\n",
+                                                 pci_name(bridge), 'A' + pin,
+                                                 irq);
                                 dev = bridge;
                         }
                         dev = temp_dev;
                         if (irq >= 0) {
-                                printk(KERN_INFO
-                                        "PCI->APIC IRQ transform: %s[%c] -> IRQ %d\n",
-                                        pci_name(dev), 'A' + pin, irq);
+                                dev_info(&dev->dev, "PCI->APIC IRQ transform: "
+                                         "INT %c -> IRQ %d\n", 'A' + pin, irq);
                                 dev->irq = irq;
                                 return 0;
                         } else
-                                msg = " Probably buggy MP table.";
+                                msg = "; probably buggy MP table";
                 } else if (pci_probe & PCI_BIOS_IRQ_SCAN)
                         msg = "";
                 else
-                        msg = " Please try using pci=biosirq.";
+                        msg = "; please try using pci=biosirq";
 
                 /*
                  * With IDE legacy devices the IRQ lookup failure is not
@@ -1259,9 +1250,8 @@ static int pirq_enable_irq(struct pci_dev *dev)
                                 !(dev->class & 0x5))
                         return 0;
 
-                printk(KERN_WARNING
-                        "PCI: No IRQ known for interrupt pin %c of device %s.%s\n",
-                        'A' + pin, pci_name(dev), msg);
+                dev_warn(&dev->dev, "can't find IRQ for PCI INT %c%s\n",
+                         'A' + pin, msg);
         }
         return 0;
 }
diff --git a/arch/x86/pci/numaq_32.c b/arch/x86/pci/numaq_32.c
index f4b16dc11dad..1177845d3186 100644
--- a/arch/x86/pci/numaq_32.c
+++ b/arch/x86/pci/numaq_32.c
@@ -131,13 +131,14 @@ static void __devinit pci_fixup_i450nx(struct pci_dev *d)
         u8 busno, suba, subb;
         int quad = BUS2QUAD(d->bus->number);
 
-        printk("PCI: Searching for i450NX host bridges on %s\n", pci_name(d));
+        dev_info(&d->dev, "searching for i450NX host bridges\n");
         reg = 0xd0;
         for(pxb=0; pxb<2; pxb++) {
                 pci_read_config_byte(d, reg++, &busno);
                 pci_read_config_byte(d, reg++, &suba);
                 pci_read_config_byte(d, reg++, &subb);
-                DBG("i450NX PXB %d: %02x/%02x/%02x\n", pxb, busno, suba, subb);
+                dev_dbg(&d->dev, "i450NX PXB %d: %02x/%02x/%02x\n",
+                        pxb, busno, suba, subb);
                 if (busno) {
                         /* Bus A */
                         pci_scan_bus_with_sysdata(QUADLOCAL2BUS(quad, busno));
diff --git a/block/blk-core.c b/block/blk-core.c
index fef79ccb2a11..4889eb86a39e 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -212,6 +212,24 @@ void blk_plug_device(struct request_queue *q)
 }
 EXPORT_SYMBOL(blk_plug_device);
 
+/**
+ * blk_plug_device_unlocked - plug a device without queue lock held
+ * @q:    The &struct request_queue to plug
+ *
+ * Description:
+ *   Like @blk_plug_device(), but grabs the queue lock and disables
+ *   interrupts.
+ **/
+void blk_plug_device_unlocked(struct request_queue *q)
+{
+        unsigned long flags;
+
+        spin_lock_irqsave(q->queue_lock, flags);
+        blk_plug_device(q);
+        spin_unlock_irqrestore(q->queue_lock, flags);
+}
+EXPORT_SYMBOL(blk_plug_device_unlocked);
+
 /*
  * remove the queue from the plugged list, if present. called with
  * queue lock held and interrupts disabled.
diff --git a/drivers/Makefile b/drivers/Makefile
index 54ec5e718c0e..a280ab3d0833 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -97,3 +97,4 @@ obj-$(CONFIG_PPC_PS3)		+= ps3/
 obj-$(CONFIG_OF)                += of/
 obj-$(CONFIG_SSB)               += ssb/
 obj-$(CONFIG_VIRTIO)            += virtio/
+obj-$(CONFIG_REGULATOR)         += regulator/
diff --git a/drivers/acpi/pci_slot.c b/drivers/acpi/pci_slot.c
index dd376f7ad090..d5b4ef898879 100644
--- a/drivers/acpi/pci_slot.c
+++ b/drivers/acpi/pci_slot.c
@@ -76,9 +76,9 @@ static struct acpi_pci_driver acpi_pci_slot_driver = {
 };
 
 static int
-check_slot(acpi_handle handle, int *device, unsigned long *sun)
+check_slot(acpi_handle handle, unsigned long *sun)
 {
-        int retval = 0;
+        int device = -1;
         unsigned long adr, sta;
         acpi_status status;
         struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
@@ -89,32 +89,27 @@ check_slot(acpi_handle handle, int *device, unsigned long *sun)
         if (check_sta_before_sun) {
                 /* If SxFy doesn't have _STA, we just assume it's there */
                 status = acpi_evaluate_integer(handle, "_STA", NULL, &sta);
-                if (ACPI_SUCCESS(status) && !(sta & ACPI_STA_DEVICE_PRESENT)) {
-                        retval = -1;
+                if (ACPI_SUCCESS(status) && !(sta & ACPI_STA_DEVICE_PRESENT))
                         goto out;
-                }
         }
 
         status = acpi_evaluate_integer(handle, "_ADR", NULL, &adr);
         if (ACPI_FAILURE(status)) {
                 dbg("_ADR returned %d on %s\n", status, (char *)buffer.pointer);
-                retval = -1;
                 goto out;
         }
 
-        *device = (adr >> 16) & 0xffff;
-
         /* No _SUN == not a slot == bail */
         status = acpi_evaluate_integer(handle, "_SUN", NULL, sun);
         if (ACPI_FAILURE(status)) {
                 dbg("_SUN returned %d on %s\n", status, (char *)buffer.pointer);
-                retval = -1;
                 goto out;
         }
 
+        device = (adr >> 16) & 0xffff;
 out:
         kfree(buffer.pointer);
-        return retval;
+        return device;
 }
 
 struct callback_args {
@@ -144,7 +139,8 @@ register_slot(acpi_handle handle, u32 lvl, void *context, void **rv)
         struct callback_args *parent_context = context;
         struct pci_bus *pci_bus = parent_context->pci_bus;
 
-        if (check_slot(handle, &device, &sun))
+        device = check_slot(handle, &sun);
+        if (device < 0)
                 return AE_OK;
 
         slot = kmalloc(sizeof(*slot), GFP_KERNEL);
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index b7f2963693a7..283c08f5f4d4 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -1332,9 +1332,15 @@ int acpi_processor_cst_has_changed(struct acpi_processor *pr)
         if (!pr->flags.power_setup_done)
                 return -ENODEV;
 
-        /* Fall back to the default idle loop */
-        pm_idle = pm_idle_save;
-        synchronize_sched();    /* Relies on interrupts forcing exit from idle. */
+        /*
+         * Fall back to the default idle loop, when pm_idle_save had
+         * been initialized.
+         */
+        if (pm_idle_save) {
+                pm_idle = pm_idle_save;
+                /* Relies on interrupts forcing exit from idle. */
+                synchronize_sched();
+        }
 
         pr->flags.power = 0;
         result = acpi_processor_get_power_info(pr);
@@ -1896,7 +1902,8 @@ int acpi_processor_power_exit(struct acpi_processor *pr,
 
         /* Unregister the idle handler when processor #0 is removed. */
         if (pr->id == 0) {
-                pm_idle = pm_idle_save;
+                if (pm_idle_save)
+                        pm_idle = pm_idle_save;
 
                 /*
                  * We are about to unload the current idle thread pm callback
diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c
index b4749969c6b4..0133af49cf06 100644
--- a/drivers/acpi/processor_perflib.c
+++ b/drivers/acpi/processor_perflib.c
@@ -64,7 +64,13 @@ static DEFINE_MUTEX(performance_mutex);
  * policy is adjusted accordingly.
  */
 
-static unsigned int ignore_ppc = 0;
+/* ignore_ppc:
+ * -1 -> cpufreq low level drivers not initialized -> _PSS, etc. not called yet
+ *       ignore _PPC
+ *  0 -> cpufreq low level drivers initialized -> consider _PPC values
+ *  1 -> ignore _PPC totally -> forced by user through boot param
+ */
+static unsigned int ignore_ppc = -1;
 module_param(ignore_ppc, uint, 0644);
 MODULE_PARM_DESC(ignore_ppc, "If the frequency of your machine gets wrongly" \
                  "limited by BIOS, this should help");
@@ -72,7 +78,7 @@ MODULE_PARM_DESC(ignore_ppc, "If the frequency of your machine gets wrongly" \
 #define PPC_REGISTERED   1
 #define PPC_IN_USE       2
 
-static int acpi_processor_ppc_status = 0;
+static int acpi_processor_ppc_status;
 
 static int acpi_processor_ppc_notifier(struct notifier_block *nb,
                                        unsigned long event, void *data)
@@ -81,13 +87,18 @@ static int acpi_processor_ppc_notifier(struct notifier_block *nb,
         struct acpi_processor *pr;
         unsigned int ppc = 0;
 
-        if (ignore_ppc)
+        if (event == CPUFREQ_START && ignore_ppc <= 0) {
+                ignore_ppc = 0;
                 return 0;
+        }
 
-        mutex_lock(&performance_mutex);
+        if (ignore_ppc)
+                return 0;
 
         if (event != CPUFREQ_INCOMPATIBLE)
-                goto out;
+                return 0;
+
+        mutex_lock(&performance_mutex);
 
         pr = per_cpu(processors, policy->cpu);
         if (!pr || !pr->performance)
diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c
index a2c3f9cfa549..a56fc6c4394b 100644
--- a/drivers/acpi/processor_throttling.c
+++ b/drivers/acpi/processor_throttling.c
@@ -827,7 +827,6 @@ static int acpi_processor_get_throttling_ptc(struct acpi_processor *pr)
 static int acpi_processor_get_throttling(struct acpi_processor *pr)
 {
         cpumask_t saved_mask;
-        cpumask_of_cpu_ptr_declare(new_mask);
         int ret;
 
         if (!pr)
@@ -839,8 +838,7 @@ static int acpi_processor_get_throttling(struct acpi_processor *pr)
          * Migrate task to the cpu pointed by pr.
          */
         saved_mask = current->cpus_allowed;
-        cpumask_of_cpu_ptr_next(new_mask, pr->id);
-        set_cpus_allowed_ptr(current, new_mask);
+        set_cpus_allowed_ptr(current, &cpumask_of_cpu(pr->id));
         ret = pr->throttling.acpi_processor_get_throttling(pr);
         /* restore the previous state */
         set_cpus_allowed_ptr(current, &saved_mask);
@@ -989,7 +987,6 @@ static int acpi_processor_set_throttling_ptc(struct acpi_processor *pr,
 int acpi_processor_set_throttling(struct acpi_processor *pr, int state)
 {
         cpumask_t saved_mask;
-        cpumask_of_cpu_ptr_declare(new_mask);
         int ret = 0;
         unsigned int i;
         struct acpi_processor *match_pr;
@@ -1028,8 +1025,7 @@ int acpi_processor_set_throttling(struct acpi_processor *pr, int state)
          * it can be called only for the cpu pointed by pr.
          */
         if (p_throttling->shared_type == DOMAIN_COORD_TYPE_SW_ANY) {
-                cpumask_of_cpu_ptr_next(new_mask, pr->id);
-                set_cpus_allowed_ptr(current, new_mask);
+                set_cpus_allowed_ptr(current, &cpumask_of_cpu(pr->id));
                 ret = p_throttling->acpi_processor_set_throttling(pr,
                                                 t_state.target_state);
         } else {
@@ -1060,8 +1056,7 @@ int acpi_processor_set_throttling(struct acpi_processor *pr, int state)
                                 continue;
                         }
                         t_state.cpu = i;
-                        cpumask_of_cpu_ptr_next(new_mask, i);
-                        set_cpus_allowed_ptr(current, new_mask);
+                        set_cpus_allowed_ptr(current, &cpumask_of_cpu(i));
                         ret = match_pr->throttling.
                                 acpi_processor_set_throttling(
                                 match_pr, t_state.target_state);
diff --git a/drivers/atm/iphase.c b/drivers/atm/iphase.c
index 24df73ad326d..088885ed51b9 100644
--- a/drivers/atm/iphase.c
+++ b/drivers/atm/iphase.c
@@ -156,8 +156,8 @@ static void ia_hack_tcq(IADEV *dev) {
         }
         iavcc_r->vc_desc_cnt--;
         dev->desc_tbl[desc1 -1].timestamp = 0;
-        IF_EVENT(printk("ia_hack: return_q skb = 0x%x desc = %d\n", 
-                                   (u32)dev->desc_tbl[desc1 -1].txskb, desc1);)
+        IF_EVENT(printk("ia_hack: return_q skb = 0x%p desc = %d\n",
+                                   dev->desc_tbl[desc1 -1].txskb, desc1);)
         if (iavcc_r->pcr < dev->rate_limit) {
            IA_SKB_STATE (dev->desc_tbl[desc1-1].txskb) |= IA_TX_DONE;
            if (ia_enque_rtn_q(&dev->tx_return_q, dev->desc_tbl[desc1 -1]) < 0)
@@ -527,8 +527,8 @@ static int ia_cbr_setup (IADEV *dev, struct atm_vcc *vcc) {
       inc = 0;
       testSlot = idealSlot;
       TstSchedTbl = (u16*)(SchedTbl+testSlot);  //set index and read in value
-      IF_CBR(printk("CBR Testslot 0x%x AT Location 0x%x, NumToAssign=%d\n",
-                                testSlot, (u32)TstSchedTbl,toBeAssigned);) 
+      IF_CBR(printk("CBR Testslot 0x%x AT Location 0x%p, NumToAssign=%d\n",
+                                testSlot, TstSchedTbl,toBeAssigned);)
       memcpy((caddr_t)&cbrVC,(caddr_t)TstSchedTbl,sizeof(cbrVC));
       while (cbrVC)  // If another VC at this location, we have to keep looking
       {
@@ -536,8 +536,8 @@ static int ia_cbr_setup (IADEV *dev, struct atm_vcc *vcc) {
           testSlot = idealSlot - inc;
           if (testSlot < 0) { // Wrap if necessary
              testSlot += dev->CbrTotEntries;
-             IF_CBR(printk("Testslot Wrap. STable Start=0x%x,Testslot=%d\n",
-                                                       (u32)SchedTbl,testSlot);)
+             IF_CBR(printk("Testslot Wrap. STable Start=0x%p,Testslot=%d\n",
+                                                       SchedTbl,testSlot);)
           }
           TstSchedTbl = (u16 *)(SchedTbl + testSlot);  // set table index
           memcpy((caddr_t)&cbrVC,(caddr_t)TstSchedTbl,sizeof(cbrVC)); 
@@ -552,8 +552,8 @@ static int ia_cbr_setup (IADEV *dev, struct atm_vcc *vcc) {
           } 
           // set table index and read in value
           TstSchedTbl = (u16*)(SchedTbl + testSlot);
-          IF_CBR(printk("Reading CBR Tbl from 0x%x, CbrVal=0x%x Iteration %d\n",
-                          (u32)TstSchedTbl,cbrVC,inc);) 
+          IF_CBR(printk("Reading CBR Tbl from 0x%p, CbrVal=0x%x Iteration %d\n",
+                          TstSchedTbl,cbrVC,inc);)
           memcpy((caddr_t)&cbrVC,(caddr_t)TstSchedTbl,sizeof(cbrVC));
        } /* while */
        // Move this VCI number into this location of the CBR Sched table.
@@ -1427,11 +1427,11 @@ static int rx_init(struct atm_dev *dev)
         /* We know this is 32bit bus addressed so the following is safe */
         writel(iadev->rx_dle_dma & 0xfffff000,
                iadev->dma + IPHASE5575_RX_LIST_ADDR);  
-        IF_INIT(printk("Tx Dle list addr: 0x%08x value: 0x%0x\n", 
-                      (u32)(iadev->dma+IPHASE5575_TX_LIST_ADDR), 
+        IF_INIT(printk("Tx Dle list addr: 0x%p value: 0x%0x\n",
+                      iadev->dma+IPHASE5575_TX_LIST_ADDR,
                       *(u32*)(iadev->dma+IPHASE5575_TX_LIST_ADDR));  
-        printk("Rx Dle list addr: 0x%08x value: 0x%0x\n", 
-                      (u32)(iadev->dma+IPHASE5575_RX_LIST_ADDR), 
+        printk("Rx Dle list addr: 0x%p value: 0x%0x\n",
+                      iadev->dma+IPHASE5575_RX_LIST_ADDR,
                       *(u32*)(iadev->dma+IPHASE5575_RX_LIST_ADDR));)  
   
         writew(0xffff, iadev->reass_reg+REASS_MASK_REG);  
@@ -1470,7 +1470,7 @@ static int rx_init(struct atm_dev *dev)
                 buf_desc_ptr++;           
                 rx_pkt_start += iadev->rx_buf_sz;  
         }  
-        IF_INIT(printk("Rx Buffer desc ptr: 0x%0x\n", (u32)(buf_desc_ptr));)  
+        IF_INIT(printk("Rx Buffer desc ptr: 0x%p\n", buf_desc_ptr);)
         i = FREE_BUF_DESC_Q*iadev->memSize; 
         writew(i >> 16,  iadev->reass_reg+REASS_QUEUE_BASE); 
         writew(i, iadev->reass_reg+FREEQ_ST_ADR);
@@ -1487,7 +1487,7 @@ static int rx_init(struct atm_dev *dev)
                 *freeq_start = (u_short)i;  
                 freeq_start++;  
         }  
-        IF_INIT(printk("freeq_start: 0x%0x\n", (u32)freeq_start);)  
+        IF_INIT(printk("freeq_start: 0x%p\n", freeq_start);)
         /* Packet Complete Queue */
         i = (PKT_COMP_Q * iadev->memSize) & 0xffff;
         writew(i, iadev->reass_reg+PCQ_ST_ADR);
@@ -1713,7 +1713,7 @@ static void tx_dle_intr(struct atm_dev *dev)
                IA_SKB_STATE(skb) |= IA_DLED;
                skb_queue_tail(&iavcc->txing_skb, skb);
             }
-            IF_EVENT(printk("tx_dle_intr: enque skb = 0x%x \n", (u32)skb);)
+            IF_EVENT(printk("tx_dle_intr: enque skb = 0x%p \n", skb);)
             if (++dle == iadev->tx_dle_q.end)
                  dle = iadev->tx_dle_q.start;
         }
@@ -2044,8 +2044,8 @@ static int tx_init(struct atm_dev *dev)
         writew(tmp16, iadev->seg_reg+CBR_TAB_END+1); // CBR_PTR;
         tmp16 = (CBR_SCHED_TABLE*iadev->memSize + iadev->num_vc*6 - 2) >> 1;
         writew(tmp16, iadev->seg_reg+CBR_TAB_END);
-        IF_INIT(printk("iadev->seg_reg = 0x%x CBR_PTR_BASE = 0x%x\n",
-               (u32)iadev->seg_reg, readw(iadev->seg_reg+CBR_PTR_BASE));)
+        IF_INIT(printk("iadev->seg_reg = 0x%p CBR_PTR_BASE = 0x%x\n",
+               iadev->seg_reg, readw(iadev->seg_reg+CBR_PTR_BASE));)
         IF_INIT(printk("CBR_TAB_BEG = 0x%x, CBR_TAB_END = 0x%x, CBR_PTR = 0x%x\n",
           readw(iadev->seg_reg+CBR_TAB_BEG), readw(iadev->seg_reg+CBR_TAB_END),
           readw(iadev->seg_reg+CBR_TAB_END+1));)
@@ -2963,8 +2963,8 @@ static int ia_pkt_tx (struct atm_vcc *vcc, struct sk_buff *skb) {
  
         /* Put the packet in a tx buffer */   
         trailer = iadev->tx_buf[desc-1].cpcs;
-        IF_TX(printk("Sent: skb = 0x%x skb->data: 0x%x len: %d, desc: %d\n",
-                  (u32)skb, (u32)skb->data, skb->len, desc);)
+        IF_TX(printk("Sent: skb = 0x%p skb->data: 0x%p len: %d, desc: %d\n",
+                  skb, skb->data, skb->len, desc);)
         trailer->control = 0; 
         /*big endian*/ 
         trailer->length = ((skb->len & 0xff) << 8) | ((skb->len & 0xff00) >> 8);
@@ -3181,7 +3181,7 @@ static int __devinit ia_init_one(struct pci_dev *pdev,
         }
         dev->dev_data = iadev;
         IF_INIT(printk(DEV_LABEL "registered at (itf :%d)\n", dev->number);)
-        IF_INIT(printk("dev_id = 0x%x iadev->LineRate = %d \n", (u32)dev,
+        IF_INIT(printk("dev_id = 0x%p iadev->LineRate = %d \n", dev,
                 iadev->LineRate);)
 
         pci_set_drvdata(pdev, dev);
diff --git a/drivers/base/memory.c b/drivers/base/memory.c
index 3ad49a00029f..af0d175c025d 100644
--- a/drivers/base/memory.c
+++ b/drivers/base/memory.c
@@ -103,7 +103,8 @@ static ssize_t show_mem_phys_index(struct sys_device *dev,
 /*
  * Show whether the section of memory is likely to be hot-removable
  */
-static ssize_t show_mem_removable(struct sys_device *dev, char *buf)
+static ssize_t show_mem_removable(struct sys_device *dev,
+                        struct sysdev_attribute *attr, char *buf)
 {
         unsigned long start_pfn;
         int ret;
diff --git a/drivers/bluetooth/hci_usb.c b/drivers/bluetooth/hci_usb.c
index 192522ebb771..c33bb59ed1fa 100644
--- a/drivers/bluetooth/hci_usb.c
+++ b/drivers/bluetooth/hci_usb.c
@@ -134,6 +134,13 @@ static struct usb_device_id blacklist_ids[] = {
 
         /* Dell laptop with Broadcom chip */
         { USB_DEVICE(0x413c, 0x8126), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU },
+        /* Dell Wireless 370 */
+        { USB_DEVICE(0x413c, 0x8156), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU },
+        /* Dell Wireless 410 */
+        { USB_DEVICE(0x413c, 0x8152), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU },
+
+        /* Broadcom 2046 */
+        { USB_DEVICE(0x0a5c, 0x2151), .driver_info = HCI_RESET },
 
         /* Microsoft Wireless Transceiver for Bluetooth 2.0 */
         { USB_DEVICE(0x045e, 0x009c), .driver_info = HCI_RESET },
diff --git a/drivers/cdrom/gdrom.c b/drivers/cdrom/gdrom.c
index 71ec426ecffc..1e0455bd6df9 100644
--- a/drivers/cdrom/gdrom.c
+++ b/drivers/cdrom/gdrom.c
@@ -39,8 +39,8 @@
 #include <asm/io.h>
 #include <asm/dma.h>
 #include <asm/delay.h>
-#include <asm/mach/dma.h>
-#include <asm/mach/sysasic.h>
+#include <mach/dma.h>
+#include <mach/sysasic.h>
 
 #define GDROM_DEV_NAME "gdrom"
 #define GD_SESSION_OFFSET 150
diff --git a/drivers/char/hw_random/intel-rng.c b/drivers/char/hw_random/intel-rng.c
index 27fdc0866496..8a2fce0756ec 100644
--- a/drivers/char/hw_random/intel-rng.c
+++ b/drivers/char/hw_random/intel-rng.c
@@ -241,7 +241,7 @@ static int __init intel_rng_hw_init(void *_intel_rng_hw)
         struct intel_rng_hw *intel_rng_hw = _intel_rng_hw;
         u8 mfc, dvc;
 
-        /* interrupts disabled in stop_machine_run call */
+        /* interrupts disabled in stop_machine call */
 
         if (!(intel_rng_hw->fwh_dec_en1_val & FWH_F8_EN_MASK))
                 pci_write_config_byte(intel_rng_hw->dev,
@@ -365,10 +365,10 @@ static int __init mod_init(void)
          * location with the Read ID command, all activity on the system
          * must be stopped until the state is back to normal.
          *
-         * Use stop_machine_run because IPIs can be blocked by disabling
+         * Use stop_machine because IPIs can be blocked by disabling
          * interrupts.
          */
-        err = stop_machine_run(intel_rng_hw_init, intel_rng_hw, NR_CPUS);
+        err = stop_machine(intel_rng_hw_init, intel_rng_hw, NULL);
         pci_dev_put(dev);
         iounmap(intel_rng_hw->mem);
         kfree(intel_rng_hw);
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index 192688344ed2..f52931e1c16e 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -66,8 +66,8 @@
 #include <linux/ctype.h>
 
 #ifdef CONFIG_PPC_OF
-#include <asm/of_device.h>
-#include <asm/of_platform.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
 #endif
 
 #define PFX "ipmi_si: "
diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c
index e30575e87648..b638403e8e9c 100644
--- a/drivers/char/mxser.c
+++ b/drivers/char/mxser.c
@@ -1612,8 +1612,10 @@ static int mxser_ioctl_special(unsigned int cmd, void __user *argp)
 
         switch (cmd) {
         case MOXA_GET_MAJOR:
-                printk(KERN_WARNING "mxser: '%s' uses deprecated ioctl %x, fix "
-                                "your userspace\n", current->comm, cmd);
+                if (printk_ratelimit())
+                        printk(KERN_WARNING "mxser: '%s' uses deprecated ioctl "
+                                        "%x (GET_MAJOR), fix your userspace\n",
+                                        current->comm, cmd);
                 return put_user(ttymajor, (int __user *)argp);
 
         case MOXA_CHKPORTENABLE:
diff --git a/drivers/char/pcmcia/ipwireless/hardware.c b/drivers/char/pcmcia/ipwireless/hardware.c
index 929101ecbae2..4c1820cad712 100644
--- a/drivers/char/pcmcia/ipwireless/hardware.c
+++ b/drivers/char/pcmcia/ipwireless/hardware.c
@@ -30,11 +30,11 @@
 static void ipw_send_setup_packet(struct ipw_hardware *hw);
 static void handle_received_SETUP_packet(struct ipw_hardware *ipw,
                                          unsigned int address,
-                                         unsigned char *data, int len,
+                                         const unsigned char *data, int len,
                                          int is_last);
 static void ipwireless_setup_timer(unsigned long data);
 static void handle_received_CTRL_packet(struct ipw_hardware *hw,
-                unsigned int channel_idx, unsigned char *data, int len);
+                unsigned int channel_idx, const unsigned char *data, int len);
 
 /*#define TIMING_DIAGNOSTICS*/
 
@@ -79,8 +79,7 @@ static void report_timing(void)
                 timing_stats.last_report_time = jiffies;
                 if (!first)
                         printk(KERN_INFO IPWIRELESS_PCCARD_NAME
-                               ": %u us elapsed - read %lu bytes in %u us, "
-                               "wrote %lu bytes in %u us\n",
+                               ": %u us elapsed - read %lu bytes in %u us, wrote %lu bytes in %u us\n",
                                jiffies_to_usecs(since),
                                timing_stats.read_bytes,
                                jiffies_to_usecs(timing_stats.read_time),
@@ -133,29 +132,17 @@ enum {
 #define NL_FOLLOWING_PACKET_HEADER_SIZE    1
 
 struct nl_first_packet_header {
-#if defined(__BIG_ENDIAN_BITFIELD)
-        unsigned char packet_rank:2;
-        unsigned char address:3;
-        unsigned char protocol:3;
-#else
         unsigned char protocol:3;
         unsigned char address:3;
         unsigned char packet_rank:2;
-#endif
         unsigned char length_lsb;
         unsigned char length_msb;
 };
 
 struct nl_packet_header {
-#if defined(__BIG_ENDIAN_BITFIELD)
-        unsigned char packet_rank:2;
-        unsigned char address:3;
-        unsigned char protocol:3;
-#else
         unsigned char protocol:3;
         unsigned char address:3;
         unsigned char packet_rank:2;
-#endif
 };
 
 /* Value of 'packet_rank' above */
@@ -227,15 +214,12 @@ struct MEMINFREG {
         unsigned short memreg_tx_new;   /* TX2 (new) Register (R/W) */
 };
 
-#define IODMADPR 0x00           /* DMA Data Port Register (R/W) */
-
 #define CARD_PRESENT_VALUE (0xBEEFCAFEUL)
 
 #define MEMTX_TX                       0x0001
 #define MEMRX_RX                       0x0001
 #define MEMRX_RX_DONE                  0x0001
 #define MEMRX_PCINTACKK                0x0001
-#define MEMRX_MEMSPURIOUSINT           0x0001
 
 #define NL_NUM_OF_PRIORITIES       3
 #define NL_NUM_OF_PROTOCOLS        3
@@ -245,7 +229,7 @@ struct ipw_hardware {
         unsigned int base_port;
         short hw_version;
         unsigned short ll_mtu;
-        spinlock_t spinlock;
+        spinlock_t lock;
 
         int initializing;
         int init_loops;
@@ -386,26 +370,52 @@ static void dump_data_bytes(const char *type, const unsigned char *data,
                         length < DUMP_MAX_BYTES ? length : DUMP_MAX_BYTES);
 }
 
-static int do_send_fragment(struct ipw_hardware *hw, const unsigned char *data,
+static void swap_packet_bitfield_to_le(unsigned char *data)
+{
+#ifdef __BIG_ENDIAN_BITFIELD
+        unsigned char tmp = *data, ret = 0;
+
+        /*
+         * transform bits from aa.bbb.ccc to ccc.bbb.aa
+         */
+        ret |= tmp & 0xc0 >> 6;
+        ret |= tmp & 0x38 >> 1;
+        ret |= tmp & 0x07 << 5;
+        *data = ret & 0xff;
+#endif
+}
+
+static void swap_packet_bitfield_from_le(unsigned char *data)
+{
+#ifdef __BIG_ENDIAN_BITFIELD
+        unsigned char tmp = *data, ret = 0;
+
+        /*
+         * transform bits from ccc.bbb.aa to aa.bbb.ccc
+         */
+        ret |= tmp & 0xe0 >> 5;
+        ret |= tmp & 0x1c << 1;
+        ret |= tmp & 0x03 << 6;
+        *data = ret & 0xff;
+#endif
+}
+
+static void do_send_fragment(struct ipw_hardware *hw, unsigned char *data,
                             unsigned length)
 {
-        int i;
+        unsigned i;
         unsigned long flags;
 
         start_timing();
-
-        if (length == 0)
-                return 0;
-
-        if (length > hw->ll_mtu)
-                return -1;
+        BUG_ON(length > hw->ll_mtu);
 
         if (ipwireless_debug)
                 dump_data_bytes("send", data, length);
 
-        spin_lock_irqsave(&hw->spinlock, flags);
+        spin_lock_irqsave(&hw->lock, flags);
 
         hw->tx_ready = 0;
+        swap_packet_bitfield_to_le(data);
 
         if (hw->hw_version == HW_VERSION_1) {
                 outw((unsigned short) length, hw->base_port + IODWR);
@@ -414,7 +424,7 @@ static int do_send_fragment(struct ipw_hardware *hw, const unsigned char *data,
                         unsigned short d = data[i];
                         __le16 raw_data;
 
-                        if (likely(i + 1 < length))
+                        if (i + 1 < length)
                                 d |= data[i + 1] << 8;
                         raw_data = cpu_to_le16(d);
                         outw(raw_data, hw->base_port + IODWR);
@@ -422,32 +432,30 @@ static int do_send_fragment(struct ipw_hardware *hw, const unsigned char *data,
 
                 outw(DCR_TXDONE, hw->base_port + IODCR);
         } else if (hw->hw_version == HW_VERSION_2) {
-                outw((unsigned short) length, hw->base_port + IODMADPR);
+                outw((unsigned short) length, hw->base_port);
 
                 for (i = 0; i < length; i += 2) {
                         unsigned short d = data[i];
                         __le16 raw_data;
 
-                        if ((i + 1 < length))
+                        if (i + 1 < length)
                                 d |= data[i + 1] << 8;
                         raw_data = cpu_to_le16(d);
-                        outw(raw_data, hw->base_port + IODMADPR);
+                        outw(raw_data, hw->base_port);
                 }
                 while ((i & 3) != 2) {
-                        outw((unsigned short) 0xDEAD, hw->base_port + IODMADPR);
+                        outw((unsigned short) 0xDEAD, hw->base_port);
                         i += 2;
                 }
                 writew(MEMRX_RX, &hw->memory_info_regs->memreg_rx);
         }
 
-        spin_unlock_irqrestore(&hw->spinlock, flags);
+        spin_unlock_irqrestore(&hw->lock, flags);
 
         end_write_timing(length);
-
-        return 0;
 }
 
-static int do_send_packet(struct ipw_hardware *hw, struct ipw_tx_packet *packet)
+static void do_send_packet(struct ipw_hardware *hw, struct ipw_tx_packet *packet)
 {
         unsigned short fragment_data_len;
         unsigned short data_left = packet->length - packet->offset;
@@ -462,6 +470,10 @@ static int do_send_packet(struct ipw_hardware *hw, struct ipw_tx_packet *packet)
         if (data_left < fragment_data_len)
                 fragment_data_len = data_left;
 
+        /*
+         * hdr_first is now in machine bitfield order, which will be swapped
+         * to le just before it goes to hw
+         */
         pkt.hdr_first.protocol = packet->protocol;
         pkt.hdr_first.address = packet->dest_addr;
         pkt.hdr_first.packet_rank = 0;
@@ -493,25 +505,23 @@ static int do_send_packet(struct ipw_hardware *hw, struct ipw_tx_packet *packet)
                  */
                 unsigned long flags;
 
-                spin_lock_irqsave(&hw->spinlock, flags);
+                spin_lock_irqsave(&hw->lock, flags);
                 list_add(&packet->queue, &hw->tx_queue[0]);
                 hw->tx_queued++;
-                spin_unlock_irqrestore(&hw->spinlock, flags);
+                spin_unlock_irqrestore(&hw->lock, flags);
         } else {
                 if (packet->packet_callback)
                         packet->packet_callback(packet->callback_data,
                                         packet->length);
                 kfree(packet);
         }
-
-        return 0;
 }
 
 static void ipw_setup_hardware(struct ipw_hardware *hw)
 {
         unsigned long flags;
 
-        spin_lock_irqsave(&hw->spinlock, flags);
+        spin_lock_irqsave(&hw->lock, flags);
         if (hw->hw_version == HW_VERSION_1) {
                 /* Reset RX FIFO */
                 outw(DCR_RXRESET, hw->base_port + IODCR);
@@ -530,7 +540,7 @@ static void ipw_setup_hardware(struct ipw_hardware *hw)
                 csr |= 1;
                 writew(csr, &hw->memregs_CCR->reg_config_and_status);
         }
-        spin_unlock_irqrestore(&hw->spinlock, flags);
+        spin_unlock_irqrestore(&hw->lock, flags);
 }
 
 /*
@@ -549,28 +559,23 @@ static struct ipw_rx_packet *pool_allocate(struct ipw_hardware *hw,
         if (!packet) {
                 unsigned long flags;
 
-                /*
-                 * If this is the first fragment, then we will need to fetch a
-                 * packet to put it in.
-                 */
-                spin_lock_irqsave(&hw->spinlock, flags);
-                /* If we have one in our pool, then pull it out. */
+                spin_lock_irqsave(&hw->lock, flags);
                 if (!list_empty(&hw->rx_pool)) {
                         packet = list_first_entry(&hw->rx_pool,
                                         struct ipw_rx_packet, queue);
-                        list_del(&packet->queue);
                         hw->rx_pool_size--;
-                        spin_unlock_irqrestore(&hw->spinlock, flags);
+                        spin_unlock_irqrestore(&hw->lock, flags);
+                        list_del(&packet->queue);
                 } else {
-                        /* Otherwise allocate a new one. */
-                        static int min_capacity = 256;
+                        const int min_capacity =
+                                ipwireless_ppp_mru(hw->network) + 2;
                         int new_capacity;
 
-                        spin_unlock_irqrestore(&hw->spinlock, flags);
+                        spin_unlock_irqrestore(&hw->lock, flags);
                         new_capacity =
-                            minimum_free_space > min_capacity
-                            ? minimum_free_space
-                            : min_capacity;
+                                (minimum_free_space > min_capacity
+                                 ? minimum_free_space
+                                 : min_capacity);
                         packet = kmalloc(sizeof(struct ipw_rx_packet)
                                         + new_capacity, GFP_ATOMIC);
                         if (!packet)
@@ -580,10 +585,6 @@ static struct ipw_rx_packet *pool_allocate(struct ipw_hardware *hw,
                 packet->length = 0;
         }
 
-        /*
-         * If this packet does not have sufficient capacity for the data we
-         * want to add, then make it bigger.
-         */
         if (packet->length + minimum_free_space > packet->capacity) {
                 struct ipw_rx_packet *old_packet = packet;
 
@@ -610,13 +611,15 @@ static void pool_free(struct ipw_hardware *hw, struct ipw_rx_packet *packet)
                 kfree(packet);
         else {
                 hw->rx_pool_size++;
-                list_add_tail(&packet->queue, &hw->rx_pool);
+                list_add(&packet->queue, &hw->rx_pool);
         }
 }
 
 static void queue_received_packet(struct ipw_hardware *hw,
-                                  unsigned int protocol, unsigned int address,
-                                  unsigned char *data, int length, int is_last)
+                                  unsigned int protocol,
+                                  unsigned int address,
+                                  const unsigned char *data, int length,
+                                  int is_last)
 {
         unsigned int channel_idx = address - 1;
         struct ipw_rx_packet *packet = NULL;
@@ -658,9 +661,9 @@ static void queue_received_packet(struct ipw_hardware *hw,
                         packet = *assem;
                         *assem = NULL;
                         /* Count queued DATA bytes only */
-                        spin_lock_irqsave(&hw->spinlock, flags);
+                        spin_lock_irqsave(&hw->lock, flags);
                         hw->rx_bytes_queued += packet->length;
-                        spin_unlock_irqrestore(&hw->spinlock, flags);
+                        spin_unlock_irqrestore(&hw->lock, flags);
                 }
         } else {
                 /* If it's a CTRL packet, don't assemble, just queue it. */
@@ -682,13 +685,13 @@ static void queue_received_packet(struct ipw_hardware *hw,
          * network layer.
          */
         if (packet) {
-                spin_lock_irqsave(&hw->spinlock, flags);
+                spin_lock_irqsave(&hw->lock, flags);
                 list_add_tail(&packet->queue, &hw->rx_queue);
                 /* Block reception of incoming packets if queue is full. */
                 hw->blocking_rx =
-                        hw->rx_bytes_queued >= IPWIRELESS_RX_QUEUE_SIZE;
+                        (hw->rx_bytes_queued >= IPWIRELESS_RX_QUEUE_SIZE);
 
-                spin_unlock_irqrestore(&hw->spinlock, flags);
+                spin_unlock_irqrestore(&hw->lock, flags);
                 schedule_work(&hw->work_rx);
         }
 }
@@ -702,7 +705,7 @@ static void ipw_receive_data_work(struct work_struct *work_rx)
             container_of(work_rx, struct ipw_hardware, work_rx);
         unsigned long flags;
 
-        spin_lock_irqsave(&hw->spinlock, flags);
+        spin_lock_irqsave(&hw->lock, flags);
         while (!list_empty(&hw->rx_queue)) {
                 struct ipw_rx_packet *packet =
                         list_first_entry(&hw->rx_queue,
@@ -720,7 +723,7 @@ static void ipw_receive_data_work(struct work_struct *work_rx)
                 if (packet->protocol == TL_PROTOCOLID_COM_DATA) {
                         if (hw->network != NULL) {
                                 /* If the network hasn't been disconnected. */
-                                spin_unlock_irqrestore(&hw->spinlock, flags);
+                                spin_unlock_irqrestore(&hw->lock, flags);
                                 /*
                                  * This must run unlocked due to tty processing
                                  * and mutex locking
@@ -731,7 +734,7 @@ static void ipw_receive_data_work(struct work_struct *work_rx)
                                                 (unsigned char *)packet
                                                 + sizeof(struct ipw_rx_packet),
                                                 packet->length);
-                                spin_lock_irqsave(&hw->spinlock, flags);
+                                spin_lock_irqsave(&hw->lock, flags);
                         }
                         /* Count queued DATA bytes only */
                         hw->rx_bytes_queued -= packet->length;
@@ -755,15 +758,15 @@ static void ipw_receive_data_work(struct work_struct *work_rx)
                 if (hw->shutting_down)
                         break;
         }
-        spin_unlock_irqrestore(&hw->spinlock, flags);
+        spin_unlock_irqrestore(&hw->lock, flags);
 }
 
 static void handle_received_CTRL_packet(struct ipw_hardware *hw,
                                         unsigned int channel_idx,
-                                        unsigned char *data, int len)
+                                        const unsigned char *data, int len)
 {
-        struct ipw_control_packet_body *body =
-                (struct ipw_control_packet_body *) data;
+        const struct ipw_control_packet_body *body =
+                (const struct ipw_control_packet_body *) data;
         unsigned int changed_mask;
 
         if (len != sizeof(struct ipw_control_packet_body)) {
@@ -805,13 +808,13 @@ static void handle_received_CTRL_packet(struct ipw_hardware *hw,
 }
 
 static void handle_received_packet(struct ipw_hardware *hw,
-                                   union nl_packet *packet,
+                                   const union nl_packet *packet,
                                    unsigned short len)
 {
         unsigned int protocol = packet->hdr.protocol;
         unsigned int address = packet->hdr.address;
         unsigned int header_length;
-        unsigned char *data;
+        const unsigned char *data;
         unsigned int data_len;
         int is_last = packet->hdr.packet_rank & NL_LAST_PACKET;
 
@@ -850,7 +853,7 @@ static void acknowledge_data_read(struct ipw_hardware *hw)
 static void do_receive_packet(struct ipw_hardware *hw)
 {
         unsigned len;
-        unsigned int i;
+        unsigned i;
         unsigned char pkt[LL_MTU_MAX];
 
         start_timing();
@@ -859,8 +862,7 @@ static void do_receive_packet(struct ipw_hardware *hw)
                 len = inw(hw->base_port + IODRR);
                 if (len > hw->ll_mtu) {
                         printk(KERN_INFO IPWIRELESS_PCCARD_NAME
-                               ": received a packet of %u bytes - "
-                               "longer than the MTU!\n", len);
+                               ": received a packet of %u bytes - longer than the MTU!\n", len);
                         outw(DCR_RXDONE | DCR_RXRESET, hw->base_port + IODCR);
                         return;
                 }
@@ -873,18 +875,17 @@ static void do_receive_packet(struct ipw_hardware *hw)
                         pkt[i + 1] = (unsigned char) (data >> 8);
                 }
         } else {
-                len = inw(hw->base_port + IODMADPR);
+                len = inw(hw->base_port);
                 if (len > hw->ll_mtu) {
                         printk(KERN_INFO IPWIRELESS_PCCARD_NAME
-                               ": received a packet of %u bytes - "
-                               "longer than the MTU!\n", len);
+                               ": received a packet of %u bytes - longer than the MTU!\n", len);
                         writew(MEMRX_PCINTACKK,
                                 &hw->memory_info_regs->memreg_pc_interrupt_ack);
                         return;
                 }
 
                 for (i = 0; i < len; i += 2) {
-                        __le16 raw_data = inw(hw->base_port + IODMADPR);
+                        __le16 raw_data = inw(hw->base_port);
                         unsigned short data = le16_to_cpu(raw_data);
 
                         pkt[i] = (unsigned char) data;
@@ -892,13 +893,15 @@ static void do_receive_packet(struct ipw_hardware *hw)
                 }
 
                 while ((i & 3) != 2) {
-                        inw(hw->base_port + IODMADPR);
+                        inw(hw->base_port);
                         i += 2;
                 }
         }
 
         acknowledge_data_read(hw);
 
+        swap_packet_bitfield_from_le(pkt);
+
         if (ipwireless_debug)
                 dump_data_bytes("recv", pkt, len);
 
@@ -916,8 +919,7 @@ static int get_current_packet_priority(struct ipw_hardware *hw)
          * until setup is complete.
          */
         return (hw->to_setup || hw->initializing
-                        ? PRIO_SETUP + 1 :
-                        NL_NUM_OF_PRIORITIES);
+                        ? PRIO_SETUP + 1 : NL_NUM_OF_PRIORITIES);
 }
 
 /*
@@ -928,17 +930,17 @@ static int get_packets_from_hw(struct ipw_hardware *hw)
         int received = 0;
         unsigned long flags;
 
-        spin_lock_irqsave(&hw->spinlock, flags);
+        spin_lock_irqsave(&hw->lock, flags);
         while (hw->rx_ready && !hw->blocking_rx) {
                 received = 1;
                 hw->rx_ready--;
-                spin_unlock_irqrestore(&hw->spinlock, flags);
+                spin_unlock_irqrestore(&hw->lock, flags);
 
                 do_receive_packet(hw);
 
-                spin_lock_irqsave(&hw->spinlock, flags);
+                spin_lock_irqsave(&hw->lock, flags);
         }
-        spin_unlock_irqrestore(&hw->spinlock, flags);
+        spin_unlock_irqrestore(&hw->lock, flags);
 
         return received;
 }
@@ -954,7 +956,7 @@ static int send_pending_packet(struct ipw_hardware *hw, int priority_limit)
         int more_to_send = 0;
         unsigned long flags;
 
-        spin_lock_irqsave(&hw->spinlock, flags);
+        spin_lock_irqsave(&hw->lock, flags);
         if (hw->tx_queued && hw->tx_ready) {
                 int priority;
                 struct ipw_tx_packet *packet = NULL;
@@ -975,17 +977,17 @@ static int send_pending_packet(struct ipw_hardware *hw, int priority_limit)
                 }
                 if (!packet) {
                         hw->tx_queued = 0;
-                        spin_unlock_irqrestore(&hw->spinlock, flags);
+                        spin_unlock_irqrestore(&hw->lock, flags);
                         return 0;
                 }
 
-                spin_unlock_irqrestore(&hw->spinlock, flags);
+                spin_unlock_irqrestore(&hw->lock, flags);
 
                 /* Send */
                 do_send_packet(hw, packet);
 
                 /* Check if more to send */
-                spin_lock_irqsave(&hw->spinlock, flags);
+                spin_lock_irqsave(&hw->lock, flags);
                 for (priority = 0; priority < priority_limit; priority++)
                         if (!list_empty(&hw->tx_queue[priority])) {
                                 more_to_send = 1;
@@ -995,7 +997,7 @@ static int send_pending_packet(struct ipw_hardware *hw, int priority_limit)
                 if (!more_to_send)
                         hw->tx_queued = 0;
         }
-        spin_unlock_irqrestore(&hw->spinlock, flags);
+        spin_unlock_irqrestore(&hw->lock, flags);
 
         return more_to_send;
 }
@@ -1008,9 +1010,9 @@ static void ipwireless_do_tasklet(unsigned long hw_)
         struct ipw_hardware *hw = (struct ipw_hardware *) hw_;
         unsigned long flags;
 
-        spin_lock_irqsave(&hw->spinlock, flags);
+        spin_lock_irqsave(&hw->lock, flags);
         if (hw->shutting_down) {
-                spin_unlock_irqrestore(&hw->spinlock, flags);
+                spin_unlock_irqrestore(&hw->lock, flags);
                 return;
         }
 
@@ -1019,7 +1021,7 @@ static void ipwireless_do_tasklet(unsigned long hw_)
                  * Initial setup data sent to hardware
                  */
                 hw->to_setup = 2;
-                spin_unlock_irqrestore(&hw->spinlock, flags);
+                spin_unlock_irqrestore(&hw->lock, flags);
 
                 ipw_setup_hardware(hw);
                 ipw_send_setup_packet(hw);
@@ -1030,7 +1032,7 @@ static void ipwireless_do_tasklet(unsigned long hw_)
                 int priority_limit = get_current_packet_priority(hw);
                 int again;
 
-                spin_unlock_irqrestore(&hw->spinlock, flags);
+                spin_unlock_irqrestore(&hw->lock, flags);
 
                 do {
                         again = send_pending_packet(hw, priority_limit);
@@ -1068,16 +1070,16 @@ static irqreturn_t ipwireless_handle_v1_interrupt(int irq,
                 /* Transmit complete. */
                 if (irqn & IR_TXINTR) {
                         ack |= IR_TXINTR;
-                        spin_lock_irqsave(&hw->spinlock, flags);
+                        spin_lock_irqsave(&hw->lock, flags);
                         hw->tx_ready = 1;
-                        spin_unlock_irqrestore(&hw->spinlock, flags);
+                        spin_unlock_irqrestore(&hw->lock, flags);
                 }
                 /* Received data */
                 if (irqn & IR_RXINTR) {
                         ack |= IR_RXINTR;
-                        spin_lock_irqsave(&hw->spinlock, flags);
+                        spin_lock_irqsave(&hw->lock, flags);
                         hw->rx_ready++;
-                        spin_unlock_irqrestore(&hw->spinlock, flags);
+                        spin_unlock_irqrestore(&hw->lock, flags);
                 }
                 if (ack != 0) {
                         outw(ack, hw->base_port + IOIR);
@@ -1128,9 +1130,8 @@ static irqreturn_t ipwireless_handle_v2_v3_interrupt(int irq,
                         } else {
                                 return IRQ_NONE;
                         }
-                } else {
+                } else
                         return IRQ_NONE;
-                }
         }
 
         /*
@@ -1149,9 +1150,9 @@ static irqreturn_t ipwireless_handle_v2_v3_interrupt(int irq,
                 if (hw->serial_number_detected) {
                         if (memtx_serial != hw->last_memtx_serial) {
                                 hw->last_memtx_serial = memtx_serial;
-                                spin_lock_irqsave(&hw->spinlock, flags);
+                                spin_lock_irqsave(&hw->lock, flags);
                                 hw->rx_ready++;
-                                spin_unlock_irqrestore(&hw->spinlock, flags);
+                                spin_unlock_irqrestore(&hw->lock, flags);
                                 rx = 1;
                         } else
                                 /* Ignore 'Timer Recovery' duplicates. */
@@ -1166,18 +1167,18 @@ static irqreturn_t ipwireless_handle_v2_v3_interrupt(int irq,
                                 printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME
                                         ": memreg_tx serial num detected\n");
 
-                                spin_lock_irqsave(&hw->spinlock, flags);
+                                spin_lock_irqsave(&hw->lock, flags);
                                 hw->rx_ready++;
-                                spin_unlock_irqrestore(&hw->spinlock, flags);
+                                spin_unlock_irqrestore(&hw->lock, flags);
                         }
                         rx = 1;
                 }
         }
         if (memrxdone & MEMRX_RX_DONE) {
                 writew(0, &hw->memory_info_regs->memreg_rx_done);
-                spin_lock_irqsave(&hw->spinlock, flags);
+                spin_lock_irqsave(&hw->lock, flags);
                 hw->tx_ready = 1;
-                spin_unlock_irqrestore(&hw->spinlock, flags);
+                spin_unlock_irqrestore(&hw->lock, flags);
                 tx = 1;
         }
         if (tx)
@@ -1195,8 +1196,7 @@ static irqreturn_t ipwireless_handle_v2_v3_interrupt(int irq,
                                         ": spurious interrupt - new_tx mode\n");
                         else {
                                 printk(KERN_WARNING IPWIRELESS_PCCARD_NAME
-                                        ": no valid memreg_tx value - "
-                                        "switching to the old memreg_tx\n");
+                                        ": no valid memreg_tx value - switching to the old memreg_tx\n");
                                 hw->memreg_tx =
                                         &hw->memory_info_regs->memreg_tx_old;
                                 try_mem_tx_old = 1;
@@ -1211,7 +1211,7 @@ static irqreturn_t ipwireless_handle_v2_v3_interrupt(int irq,
         return IRQ_HANDLED;
 }
 
-irqreturn_t ipwireless_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+irqreturn_t ipwireless_interrupt(int irq, void *dev_id)
 {
         struct ipw_hardware *hw = dev_id;
 
@@ -1226,9 +1226,9 @@ static void flush_packets_to_hw(struct ipw_hardware *hw)
         int priority_limit;
         unsigned long flags;
 
-        spin_lock_irqsave(&hw->spinlock, flags);
+        spin_lock_irqsave(&hw->lock, flags);
         priority_limit = get_current_packet_priority(hw);
-        spin_unlock_irqrestore(&hw->spinlock, flags);
+        spin_unlock_irqrestore(&hw->lock, flags);
 
         while (send_pending_packet(hw, priority_limit));
 }
@@ -1238,10 +1238,10 @@ static void send_packet(struct ipw_hardware *hw, int priority,
 {
         unsigned long flags;
 
-        spin_lock_irqsave(&hw->spinlock, flags);
+        spin_lock_irqsave(&hw->lock, flags);
         list_add_tail(&packet->queue, &hw->tx_queue[priority]);
         hw->tx_queued++;
-        spin_unlock_irqrestore(&hw->spinlock, flags);
+        spin_unlock_irqrestore(&hw->lock, flags);
 
         flush_packets_to_hw(hw);
 }
@@ -1291,21 +1291,20 @@ static void *alloc_ctrl_packet(int header_size,
 }
 
 int ipwireless_send_packet(struct ipw_hardware *hw, unsigned int channel_idx,
-                            unsigned char *data, unsigned int length,
+                            const unsigned char *data, unsigned int length,
                             void (*callback) (void *cb, unsigned int length),
                             void *callback_data)
 {
         struct ipw_tx_packet *packet;
 
-        packet = alloc_data_packet(length,
-                               (unsigned char) (channel_idx + 1),
-                               TL_PROTOCOLID_COM_DATA);
+        packet = alloc_data_packet(length, (channel_idx + 1),
+                        TL_PROTOCOLID_COM_DATA);
         if (!packet)
                 return -ENOMEM;
         packet->packet_callback = callback;
         packet->callback_data = callback_data;
-        memcpy((unsigned char *) packet +
-                        sizeof(struct ipw_tx_packet), data, length);
+        memcpy((unsigned char *) packet + sizeof(struct ipw_tx_packet), data,
+                        length);
 
         send_packet(hw, PRIO_DATA, packet);
         return 0;
@@ -1321,12 +1320,11 @@ static int set_control_line(struct ipw_hardware *hw, int prio,
                 protocolid = TL_PROTOCOLID_SETUP;
 
         packet = alloc_ctrl_packet(sizeof(struct ipw_control_packet),
-                        (unsigned char) (channel_idx + 1),
-                        protocolid, line);
+                        (channel_idx + 1), protocolid, line);
         if (!packet)
                 return -ENOMEM;
         packet->header.length = sizeof(struct ipw_control_packet_body);
-        packet->body.value = (unsigned char) (state == 0 ? 0 : 1);
+        packet->body.value = (state == 0 ? 0 : 1);
         send_packet(hw, prio, &packet->header);
         return 0;
 }
@@ -1504,8 +1502,7 @@ static void handle_setup_get_version_rsp(struct ipw_hardware *hw,
         if (vers_no == TL_SETUP_VERSION)
                 __handle_setup_get_version_rsp(hw);
         else
-                printk(KERN_ERR
-                                IPWIRELESS_PCCARD_NAME
+                printk(KERN_ERR IPWIRELESS_PCCARD_NAME
                                 ": invalid hardware version no %u\n",
                                 (unsigned int) vers_no);
 }
@@ -1528,10 +1525,10 @@ static void ipw_send_setup_packet(struct ipw_hardware *hw)
 
 static void handle_received_SETUP_packet(struct ipw_hardware *hw,
                                          unsigned int address,
-                                         unsigned char *data, int len,
+                                         const unsigned char *data, int len,
                                          int is_last)
 {
-        union ipw_setup_rx_msg *rx_msg = (union ipw_setup_rx_msg *) data;
+        const union ipw_setup_rx_msg *rx_msg = (const union ipw_setup_rx_msg *) data;
 
         if (address != ADDR_SETUP_PROT) {
                 printk(KERN_INFO IPWIRELESS_PCCARD_NAME
@@ -1629,7 +1626,7 @@ struct ipw_hardware *ipwireless_hardware_create(void)
 
         INIT_LIST_HEAD(&hw->rx_queue);
         INIT_LIST_HEAD(&hw->rx_pool);
-        spin_lock_init(&hw->spinlock);
+        spin_lock_init(&hw->lock);
         tasklet_init(&hw->tasklet, ipwireless_do_tasklet, (unsigned long) hw);
         INIT_WORK(&hw->work_rx, ipw_receive_data_work);
         setup_timer(&hw->setup_timer, ipwireless_setup_timer,
@@ -1651,8 +1648,8 @@ void ipwireless_init_hardware_v1(struct ipw_hardware *hw,
                 enable_irq(hw->irq);
         }
         hw->base_port = base_port;
-        hw->hw_version = is_v2_card ? HW_VERSION_2 : HW_VERSION_1;
-        hw->ll_mtu = hw->hw_version == HW_VERSION_1 ? LL_MTU_V1 : LL_MTU_V2;
+        hw->hw_version = (is_v2_card ? HW_VERSION_2 : HW_VERSION_1);
+        hw->ll_mtu = (hw->hw_version == HW_VERSION_1 ? LL_MTU_V1 : LL_MTU_V2);
         hw->memregs_CCR = (struct MEMCCR __iomem *)
                         ((unsigned short __iomem *) attr_memory + 0x200);
         hw->memory_info_regs = (struct MEMINFREG __iomem *) common_memory;
@@ -1695,10 +1692,10 @@ static void ipwireless_setup_timer(unsigned long data)
                 if (is_card_present(hw)) {
                         unsigned long flags;
 
-                        spin_lock_irqsave(&hw->spinlock, flags);
+                        spin_lock_irqsave(&hw->lock, flags);
                         hw->to_setup = 1;
                         hw->tx_ready = 1;
-                        spin_unlock_irqrestore(&hw->spinlock, flags);
+                        spin_unlock_irqrestore(&hw->lock, flags);
                         tasklet_schedule(&hw->tasklet);
                 }
 
diff --git a/drivers/char/pcmcia/ipwireless/hardware.h b/drivers/char/pcmcia/ipwireless/hardware.h
index 19ce5eb266b1..90a8590e43b0 100644
--- a/drivers/char/pcmcia/ipwireless/hardware.h
+++ b/drivers/char/pcmcia/ipwireless/hardware.h
@@ -34,14 +34,14 @@ struct ipw_network;
 
 struct ipw_hardware *ipwireless_hardware_create(void);
 void ipwireless_hardware_free(struct ipw_hardware *hw);
-irqreturn_t ipwireless_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+irqreturn_t ipwireless_interrupt(int irq, void *dev_id);
 int ipwireless_set_DTR(struct ipw_hardware *hw, unsigned int channel_idx,
                 int state);
 int ipwireless_set_RTS(struct ipw_hardware *hw, unsigned int channel_idx,
                 int state);
 int ipwireless_send_packet(struct ipw_hardware *hw,
                             unsigned int channel_idx,
-                            unsigned char *data,
+                            const unsigned char *data,
                             unsigned int length,
                             void (*packet_sent_callback) (void *cb,
                                                           unsigned int length),
diff --git a/drivers/char/pcmcia/ipwireless/main.c b/drivers/char/pcmcia/ipwireless/main.c
index cc7dcea2d283..5eca7a99afe6 100644
--- a/drivers/char/pcmcia/ipwireless/main.c
+++ b/drivers/char/pcmcia/ipwireless/main.c
@@ -49,7 +49,7 @@ static void ipwireless_detach(struct pcmcia_device *link);
 /* Debug mode: more verbose, print sent/recv bytes */
 int ipwireless_debug;
 int ipwireless_loopback;
-int ipwireless_out_queue = 1;
+int ipwireless_out_queue = 10;
 
 module_param_named(debug, ipwireless_debug, int, 0);
 module_param_named(loopback, ipwireless_loopback, int, 0);
@@ -57,7 +57,7 @@ module_param_named(out_queue, ipwireless_out_queue, int, 0);
 MODULE_PARM_DESC(debug, "switch on debug messages [0]");
 MODULE_PARM_DESC(loopback,
                 "debug: enable ras_raw channel [0]");
-MODULE_PARM_DESC(out_queue, "debug: set size of outgoing queue [1]");
+MODULE_PARM_DESC(out_queue, "debug: set size of outgoing PPP queue [10]");
 
 /* Executes in process context. */
 static void signalled_reboot_work(struct work_struct *work_reboot)
@@ -88,8 +88,6 @@ static int config_ipwireless(struct ipw_dev *ipw)
         unsigned short buf[64];
         cisparse_t parse;
         unsigned short cor_value;
-        win_req_t request_attr_memory;
-        win_req_t request_common_memory;
         memreq_t memreq_attr_memory;
         memreq_t memreq_common_memory;
 
@@ -188,6 +186,9 @@ static int config_ipwireless(struct ipw_dev *ipw)
                 goto exit0;
         }
 
+        request_region(link->io.BasePort1, link->io.NumPorts1,
+                        IPWIRELESS_PCCARD_NAME);
+
         /* memory settings */
 
         tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
@@ -214,16 +215,16 @@ static int config_ipwireless(struct ipw_dev *ipw)
         }
 
         if (parse.cftable_entry.mem.nwin > 0) {
-                request_common_memory.Attributes =
+                ipw->request_common_memory.Attributes =
                         WIN_DATA_WIDTH_16 | WIN_MEMORY_TYPE_CM | WIN_ENABLE;
-                request_common_memory.Base =
+                ipw->request_common_memory.Base =
                         parse.cftable_entry.mem.win[0].host_addr;
-                request_common_memory.Size = parse.cftable_entry.mem.win[0].len;
-                if (request_common_memory.Size < 0x1000)
-                        request_common_memory.Size = 0x1000;
-                request_common_memory.AccessSpeed = 0;
+                ipw->request_common_memory.Size = parse.cftable_entry.mem.win[0].len;
+                if (ipw->request_common_memory.Size < 0x1000)
+                        ipw->request_common_memory.Size = 0x1000;
+                ipw->request_common_memory.AccessSpeed = 0;
 
-                ret = pcmcia_request_window(&link, &request_common_memory,
+                ret = pcmcia_request_window(&link, &ipw->request_common_memory,
                                 &ipw->handle_common_memory);
 
                 if (ret != CS_SUCCESS) {
@@ -246,16 +247,18 @@ static int config_ipwireless(struct ipw_dev *ipw)
                 ipw->is_v2_card =
                         parse.cftable_entry.mem.win[0].len == 0x100;
 
-                ipw->common_memory = ioremap(request_common_memory.Base,
-                                request_common_memory.Size);
+                ipw->common_memory = ioremap(ipw->request_common_memory.Base,
+                                ipw->request_common_memory.Size);
+                request_mem_region(ipw->request_common_memory.Base,
+                                ipw->request_common_memory.Size, IPWIRELESS_PCCARD_NAME);
 
-                request_attr_memory.Attributes =
+                ipw->request_attr_memory.Attributes =
                         WIN_DATA_WIDTH_16 | WIN_MEMORY_TYPE_AM | WIN_ENABLE;
-                request_attr_memory.Base = 0;
-                request_attr_memory.Size = 0;   /* this used to be 0x1000 */
-                request_attr_memory.AccessSpeed = 0;
+                ipw->request_attr_memory.Base = 0;
+                ipw->request_attr_memory.Size = 0;      /* this used to be 0x1000 */
+                ipw->request_attr_memory.AccessSpeed = 0;
 
-                ret = pcmcia_request_window(&link, &request_attr_memory,
+                ret = pcmcia_request_window(&link, &ipw->request_attr_memory,
                                 &ipw->handle_attr_memory);
 
                 if (ret != CS_SUCCESS) {
@@ -274,8 +277,10 @@ static int config_ipwireless(struct ipw_dev *ipw)
                         goto exit2;
                 }
 
-                ipw->attr_memory = ioremap(request_attr_memory.Base,
-                                request_attr_memory.Size);
+                ipw->attr_memory = ioremap(ipw->request_attr_memory.Base,
+                                ipw->request_attr_memory.Size);
+                request_mem_region(ipw->request_attr_memory.Base, ipw->request_attr_memory.Size,
+                                IPWIRELESS_PCCARD_NAME);
         }
 
         INIT_WORK(&ipw->work_reboot, signalled_reboot_work);
@@ -311,14 +316,13 @@ static int config_ipwireless(struct ipw_dev *ipw)
                         (unsigned int) link->irq.AssignedIRQ);
         if (ipw->attr_memory && ipw->common_memory)
                 printk(KERN_INFO IPWIRELESS_PCCARD_NAME
-                                ": attr memory 0x%08lx-0x%08lx, "
-                                "common memory 0x%08lx-0x%08lx\n",
-                                request_attr_memory.Base,
-                                request_attr_memory.Base
-                                + request_attr_memory.Size - 1,
-                                request_common_memory.Base,
-                                request_common_memory.Base
-                                + request_common_memory.Size - 1);
+                        ": attr memory 0x%08lx-0x%08lx, common memory 0x%08lx-0x%08lx\n",
+                        ipw->request_attr_memory.Base,
+                        ipw->request_attr_memory.Base
+                        + ipw->request_attr_memory.Size - 1,
+                        ipw->request_common_memory.Base,
+                        ipw->request_common_memory.Base
+                        + ipw->request_common_memory.Size - 1);
 
         ipw->network = ipwireless_network_create(ipw->hardware);
         if (!ipw->network)
@@ -350,12 +354,16 @@ exit4:
         pcmcia_disable_device(link);
 exit3:
         if (ipw->attr_memory) {
+                release_mem_region(ipw->request_attr_memory.Base,
+                                ipw->request_attr_memory.Size);
                 iounmap(ipw->attr_memory);
                 pcmcia_release_window(ipw->handle_attr_memory);
                 pcmcia_disable_device(link);
         }
 exit2:
         if (ipw->common_memory) {
+                release_mem_region(ipw->request_common_memory.Base,
+                                ipw->request_common_memory.Size);
                 iounmap(ipw->common_memory);
                 pcmcia_release_window(ipw->handle_common_memory);
         }
@@ -367,19 +375,25 @@ exit0:
 
 static void release_ipwireless(struct ipw_dev *ipw)
 {
-        struct pcmcia_device *link = ipw->link;
-
-        pcmcia_disable_device(link);
+        pcmcia_disable_device(ipw->link);
 
-        if (ipw->common_memory)
+        if (ipw->common_memory) {
+                release_mem_region(ipw->request_common_memory.Base,
+                                ipw->request_common_memory.Size);
                 iounmap(ipw->common_memory);
-        if (ipw->attr_memory)
+        }
+        if (ipw->attr_memory) {
+                release_mem_region(ipw->request_attr_memory.Base,
+                                ipw->request_attr_memory.Size);
                 iounmap(ipw->attr_memory);
+        }
         if (ipw->common_memory)
                 pcmcia_release_window(ipw->handle_common_memory);
         if (ipw->attr_memory)
                 pcmcia_release_window(ipw->handle_attr_memory);
-        pcmcia_disable_device(link);
+
+        /* Break the link with Card Services */
+        pcmcia_disable_device(ipw->link);
 }
 
 /*
@@ -437,10 +451,6 @@ static void ipwireless_detach(struct pcmcia_device *link)
 
         release_ipwireless(ipw);
 
-        /* Break the link with Card Services */
-        if (link)
-                pcmcia_disable_device(link);
-
         if (ipw->tty != NULL)
                 ipwireless_tty_free(ipw->tty);
         if (ipw->network != NULL)
diff --git a/drivers/char/pcmcia/ipwireless/main.h b/drivers/char/pcmcia/ipwireless/main.h
index 1bfdcc8d47d6..0e0363af9ab2 100644
--- a/drivers/char/pcmcia/ipwireless/main.h
+++ b/drivers/char/pcmcia/ipwireless/main.h
@@ -45,10 +45,15 @@ struct ipw_tty;
 struct ipw_dev {
         struct pcmcia_device *link;
         int is_v2_card;
+
         window_handle_t handle_attr_memory;
         void __iomem *attr_memory;
+        win_req_t request_attr_memory;
+
         window_handle_t handle_common_memory;
         void __iomem *common_memory;
+        win_req_t request_common_memory;
+
         dev_node_t nodes[2];
         /* Reference to attribute memory, containing CIS data */
         void *attribute_memory;
diff --git a/drivers/char/pcmcia/ipwireless/network.c b/drivers/char/pcmcia/ipwireless/network.c
index fe914d34f7f6..590762a7f217 100644
--- a/drivers/char/pcmcia/ipwireless/network.c
+++ b/drivers/char/pcmcia/ipwireless/network.c
@@ -29,7 +29,6 @@
 #include "main.h"
 #include "tty.h"
 
-#define MAX_OUTGOING_PACKETS_QUEUED   ipwireless_out_queue
 #define MAX_ASSOCIATED_TTYS 2
 
 #define SC_RCV_BITS     (SC_RCV_B7_1|SC_RCV_B7_0|SC_RCV_ODDP|SC_RCV_EVNP)
@@ -46,7 +45,7 @@ struct ipw_network {
         /* Number of packets queued up in hardware module. */
         int outgoing_packets_queued;
         /* Spinlock to avoid interrupts during shutdown */
-        spinlock_t spinlock;
+        spinlock_t lock;
         struct mutex close_lock;
 
         /* PPP ioctl data, not actually used anywere */
@@ -68,20 +67,20 @@ static void notify_packet_sent(void *callback_data, unsigned int packet_length)
         struct ipw_network *network = callback_data;
         unsigned long flags;
 
-        spin_lock_irqsave(&network->spinlock, flags);
+        spin_lock_irqsave(&network->lock, flags);
         network->outgoing_packets_queued--;
         if (network->ppp_channel != NULL) {
                 if (network->ppp_blocked) {
                         network->ppp_blocked = 0;
-                        spin_unlock_irqrestore(&network->spinlock, flags);
+                        spin_unlock_irqrestore(&network->lock, flags);
                         ppp_output_wakeup(network->ppp_channel);
                         if (ipwireless_debug)
-                                printk(KERN_INFO IPWIRELESS_PCCARD_NAME
+                                printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME
                                        ": ppp unblocked\n");
                 } else
-                        spin_unlock_irqrestore(&network->spinlock, flags);
+                        spin_unlock_irqrestore(&network->lock, flags);
         } else
-                spin_unlock_irqrestore(&network->spinlock, flags);
+                spin_unlock_irqrestore(&network->lock, flags);
 }
 
 /*
@@ -93,8 +92,8 @@ static int ipwireless_ppp_start_xmit(struct ppp_channel *ppp_channel,
         struct ipw_network *network = ppp_channel->private;
         unsigned long flags;
 
-        spin_lock_irqsave(&network->spinlock, flags);
-        if (network->outgoing_packets_queued < MAX_OUTGOING_PACKETS_QUEUED) {
+        spin_lock_irqsave(&network->lock, flags);
+        if (network->outgoing_packets_queued < ipwireless_out_queue) {
                 unsigned char *buf;
                 static unsigned char header[] = {
                         PPP_ALLSTATIONS, /* 0xff */
@@ -103,7 +102,7 @@ static int ipwireless_ppp_start_xmit(struct ppp_channel *ppp_channel,
                 int ret;
 
                 network->outgoing_packets_queued++;
-                spin_unlock_irqrestore(&network->spinlock, flags);
+                spin_unlock_irqrestore(&network->lock, flags);
 
                 /*
                  * If we have the requested amount of headroom in the skb we
@@ -144,7 +143,9 @@ static int ipwireless_ppp_start_xmit(struct ppp_channel *ppp_channel,
                  * needs to be unblocked once we are ready to send.
                  */
                 network->ppp_blocked = 1;
-                spin_unlock_irqrestore(&network->spinlock, flags);
+                spin_unlock_irqrestore(&network->lock, flags);
+                if (ipwireless_debug)
+                        printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME ": ppp blocked\n");
                 return 0;
         }
 }
@@ -249,11 +250,11 @@ static void do_go_online(struct work_struct *work_go_online)
                                 work_go_online);
         unsigned long flags;
 
-        spin_lock_irqsave(&network->spinlock, flags);
+        spin_lock_irqsave(&network->lock, flags);
         if (!network->ppp_channel) {
                 struct ppp_channel *channel;
 
-                spin_unlock_irqrestore(&network->spinlock, flags);
+                spin_unlock_irqrestore(&network->lock, flags);
                 channel = kzalloc(sizeof(struct ppp_channel), GFP_KERNEL);
                 if (!channel) {
                         printk(KERN_ERR IPWIRELESS_PCCARD_NAME
@@ -273,10 +274,10 @@ static void do_go_online(struct work_struct *work_go_online)
                 network->xaccm[3] = 0x60000000U;
                 network->raccm = ~0U;
                 ppp_register_channel(channel);
-                spin_lock_irqsave(&network->spinlock, flags);
+                spin_lock_irqsave(&network->lock, flags);
                 network->ppp_channel = channel;
         }
-        spin_unlock_irqrestore(&network->spinlock, flags);
+        spin_unlock_irqrestore(&network->lock, flags);
 }
 
 static void do_go_offline(struct work_struct *work_go_offline)
@@ -287,16 +288,16 @@ static void do_go_offline(struct work_struct *work_go_offline)
         unsigned long flags;
 
         mutex_lock(&network->close_lock);
-        spin_lock_irqsave(&network->spinlock, flags);
+        spin_lock_irqsave(&network->lock, flags);
         if (network->ppp_channel != NULL) {
                 struct ppp_channel *channel = network->ppp_channel;
 
                 network->ppp_channel = NULL;
-                spin_unlock_irqrestore(&network->spinlock, flags);
+                spin_unlock_irqrestore(&network->lock, flags);
                 mutex_unlock(&network->close_lock);
                 ppp_unregister_channel(channel);
         } else {
-                spin_unlock_irqrestore(&network->spinlock, flags);
+                spin_unlock_irqrestore(&network->lock, flags);
                 mutex_unlock(&network->close_lock);
         }
 }
@@ -381,18 +382,18 @@ void ipwireless_network_packet_received(struct ipw_network *network,
                          * the PPP layer.
                          */
                         mutex_lock(&network->close_lock);
-                        spin_lock_irqsave(&network->spinlock, flags);
+                        spin_lock_irqsave(&network->lock, flags);
                         if (network->ppp_channel != NULL) {
                                 struct sk_buff *skb;
 
-                                spin_unlock_irqrestore(&network->spinlock,
+                                spin_unlock_irqrestore(&network->lock,
                                                 flags);
 
                                 /* Send the data to the ppp_generic module. */
                                 skb = ipw_packet_received_skb(data, length);
                                 ppp_input(network->ppp_channel, skb);
                         } else
-                                spin_unlock_irqrestore(&network->spinlock,
+                                spin_unlock_irqrestore(&network->lock,
                                                 flags);
                         mutex_unlock(&network->close_lock);
                 }
@@ -410,7 +411,7 @@ struct ipw_network *ipwireless_network_create(struct ipw_hardware *hw)
         if (!network)
                 return NULL;
 
-        spin_lock_init(&network->spinlock);
+        spin_lock_init(&network->lock);
         mutex_init(&network->close_lock);
 
         network->hardware = hw;
@@ -478,10 +479,10 @@ int ipwireless_ppp_channel_index(struct ipw_network *network)
         int ret = -1;
         unsigned long flags;
 
-        spin_lock_irqsave(&network->spinlock, flags);
+        spin_lock_irqsave(&network->lock, flags);
         if (network->ppp_channel != NULL)
                 ret = ppp_channel_index(network->ppp_channel);
-        spin_unlock_irqrestore(&network->spinlock, flags);
+        spin_unlock_irqrestore(&network->lock, flags);
 
         return ret;
 }
@@ -491,10 +492,15 @@ int ipwireless_ppp_unit_number(struct ipw_network *network)
         int ret = -1;
         unsigned long flags;
 
-        spin_lock_irqsave(&network->spinlock, flags);
+        spin_lock_irqsave(&network->lock, flags);
         if (network->ppp_channel != NULL)
                 ret = ppp_unit_number(network->ppp_channel);
-        spin_unlock_irqrestore(&network->spinlock, flags);
+        spin_unlock_irqrestore(&network->lock, flags);
 
         return ret;
 }
+
+int ipwireless_ppp_mru(const struct ipw_network *network)
+{
+        return network->mru;
+}
diff --git a/drivers/char/pcmcia/ipwireless/network.h b/drivers/char/pcmcia/ipwireless/network.h
index ccacd26fc7ef..561f765b3334 100644
--- a/drivers/char/pcmcia/ipwireless/network.h
+++ b/drivers/char/pcmcia/ipwireless/network.h
@@ -48,5 +48,6 @@ void ipwireless_ppp_open(struct ipw_network *net);
 void ipwireless_ppp_close(struct ipw_network *net);
 int ipwireless_ppp_channel_index(struct ipw_network *net);
 int ipwireless_ppp_unit_number(struct ipw_network *net);
+int ipwireless_ppp_mru(const struct ipw_network *net);
 
 #endif
diff --git a/drivers/char/pcmcia/ipwireless/tty.c b/drivers/char/pcmcia/ipwireless/tty.c
index 42f3815c5ce3..b1414507997c 100644
--- a/drivers/char/pcmcia/ipwireless/tty.c
+++ b/drivers/char/pcmcia/ipwireless/tty.c
@@ -259,7 +259,7 @@ static int ipw_write(struct tty_struct *linux_tty,
         }
 
         ret = ipwireless_send_packet(tty->hardware, IPW_CHANNEL_RAS,
-                               (unsigned char *) buf, count,
+                               buf, count,
                                ipw_write_packet_sent_callback, tty);
         if (ret == -1) {
                 mutex_unlock(&tty->ipw_tty_mutex);
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 8d6a3ff02672..8a67f16987db 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -825,6 +825,9 @@ static int cpufreq_add_dev(struct sys_device *sys_dev)
         policy->user_policy.min = policy->cpuinfo.min_freq;
         policy->user_policy.max = policy->cpuinfo.max_freq;
 
+        blocking_notifier_call_chain(&cpufreq_policy_notifier_list,
+                                     CPUFREQ_START, policy);
+
 #ifdef CONFIG_SMP
 
 #ifdef CONFIG_HOTPLUG_CPU
diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c
index 5405769020a1..5ce07b517c58 100644
--- a/drivers/cpuidle/cpuidle.c
+++ b/drivers/cpuidle/cpuidle.c
@@ -94,7 +94,7 @@ void cpuidle_install_idle_handler(void)
  */
 void cpuidle_uninstall_idle_handler(void)
 {
-        if (enabled_devices && (pm_idle != pm_idle_old)) {
+        if (enabled_devices && pm_idle_old && (pm_idle != pm_idle_old)) {
                 pm_idle = pm_idle_old;
                 cpuidle_kick_cpus();
         }
diff --git a/drivers/firmware/dcdbas.c b/drivers/firmware/dcdbas.c
index c66817e7717b..50a071f1c945 100644
--- a/drivers/firmware/dcdbas.c
+++ b/drivers/firmware/dcdbas.c
@@ -245,7 +245,6 @@ static ssize_t host_control_on_shutdown_store(struct device *dev,
 static int smi_request(struct smi_cmd *smi_cmd)
 {
         cpumask_t old_mask;
-        cpumask_of_cpu_ptr(new_mask, 0);
         int ret = 0;
 
         if (smi_cmd->magic != SMI_CMD_MAGIC) {
@@ -256,7 +255,7 @@ static int smi_request(struct smi_cmd *smi_cmd)
 
         /* SMI requires CPU 0 */
         old_mask = current->cpus_allowed;
-        set_cpus_allowed_ptr(current, new_mask);
+        set_cpus_allowed_ptr(current, &cpumask_of_cpu(0));
         if (smp_processor_id() != 0) {
                 dev_dbg(&dcdbas_pdev->dev, "%s: failed to get CPU 0\n",
                         __func__);
diff --git a/drivers/firmware/iscsi_ibft_find.c b/drivers/firmware/iscsi_ibft_find.c
index 11f17440fea6..d53fbbfefa3e 100644
--- a/drivers/firmware/iscsi_ibft_find.c
+++ b/drivers/firmware/iscsi_ibft_find.c
@@ -81,4 +81,3 @@ void __init reserve_ibft_region(void)
         if (ibft_addr)
                 reserve_bootmem(pos, PAGE_ALIGN(len), BOOTMEM_DEFAULT);
 }
-EXPORT_SYMBOL_GPL(reserve_ibft_region);
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 00ff53348491..c882fd05cf29 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -394,13 +394,24 @@ config SENSORS_LM75
         tristate "National Semiconductor LM75 and compatibles"
         depends on I2C
         help
-          If you say yes here you get support for National Semiconductor LM75
-          sensor chips and clones: Dallas Semiconductor DS75 and DS1775 (in
-          9-bit precision mode), and TelCom (now Microchip) TCN75.
-
-          The DS75 and DS1775 in 10- to 12-bit precision modes will require
-          a force module parameter. The driver will not handle the extra
-          precision anyhow.
+          If you say yes here you get support for one common type of
+          temperature sensor chip, with models including:
+
+                - Dallas Semiconductor DS75 and DS1775
+                - Maxim MAX6625 and MAX6626
+                - Microchip MCP980x
+                - National Semiconductor LM75
+                - NXP's LM75A
+                - ST Microelectronics STDS75
+                - TelCom (now Microchip) TCN75
+                - Texas Instruments TMP100, TMP101, TMP75, TMP175, TMP275
+
+          This driver supports driver model based binding through board
+          specific I2C device tables.
+
+          It also supports the "legacy" style of driver binding.  To use
+          that with some chips which don't replicate LM75 quirks exactly,
+          you may need the "force" module parameter.
 
           This driver can also be built as a module.  If so, the module
           will be called lm75.
diff --git a/drivers/hwmon/adt7473.c b/drivers/hwmon/adt7473.c
index ce4a7cb5a116..3a0b63136479 100644
--- a/drivers/hwmon/adt7473.c
+++ b/drivers/hwmon/adt7473.c
@@ -39,32 +39,20 @@ I2C_CLIENT_INSMOD_1(adt7473);
 #define ADT7473_REG_BASE_ADDR                   0x20
 
 #define ADT7473_REG_VOLT_BASE_ADDR              0x21
-#define ADT7473_REG_VOLT_MAX_ADDR               0x22
 #define ADT7473_REG_VOLT_MIN_BASE_ADDR          0x46
-#define ADT7473_REG_VOLT_MIN_MAX_ADDR           0x49
 
 #define ADT7473_REG_TEMP_BASE_ADDR              0x25
-#define ADT7473_REG_TEMP_MAX_ADDR               0x27
 #define ADT7473_REG_TEMP_LIMITS_BASE_ADDR       0x4E
-#define ADT7473_REG_TEMP_LIMITS_MAX_ADDR        0x53
 #define ADT7473_REG_TEMP_TMIN_BASE_ADDR         0x67
-#define ADT7473_REG_TEMP_TMIN_MAX_ADDR          0x69
 #define ADT7473_REG_TEMP_TMAX_BASE_ADDR         0x6A
-#define ADT7473_REG_TEMP_TMAX_MAX_ADDR          0x6C
 
 #define ADT7473_REG_FAN_BASE_ADDR               0x28
-#define ADT7473_REG_FAN_MAX_ADDR                0x2F
 #define ADT7473_REG_FAN_MIN_BASE_ADDR           0x54
-#define ADT7473_REG_FAN_MIN_MAX_ADDR            0x5B
 
 #define ADT7473_REG_PWM_BASE_ADDR               0x30
-#define ADT7473_REG_PWM_MAX_ADDR                0x32
 #define ADT7473_REG_PWM_MIN_BASE_ADDR           0x64
-#define ADT7473_REG_PWM_MIN_MAX_ADDR            0x66
 #define ADT7473_REG_PWM_MAX_BASE_ADDR           0x38
-#define ADT7473_REG_PWM_MAX_MAX_ADDR            0x3A
 #define ADT7473_REG_PWM_BHVR_BASE_ADDR          0x5C
-#define ADT7473_REG_PWM_BHVR_MAX_ADDR           0x5E
 #define         ADT7473_PWM_BHVR_MASK           0xE0
 #define         ADT7473_PWM_BHVR_SHIFT          5
 
@@ -102,7 +90,6 @@ I2C_CLIENT_INSMOD_1(adt7473);
 #define         ADT7473_FAN4_ALARM              0x20
 #define         ADT7473_R1T_SHORT               0x40
 #define         ADT7473_R2T_SHORT               0x80
-#define ADT7473_REG_MAX_ADDR                    0x80
 
 #define ALARM2(x)       ((x) << 8)
 
@@ -583,10 +570,9 @@ static ssize_t set_max_duty_at_crit(struct device *dev,
         struct i2c_client *client = to_i2c_client(dev);
         struct adt7473_data *data = i2c_get_clientdata(client);
         int temp = simple_strtol(buf, NULL, 10);
-        temp = temp && 0xFF;
 
         mutex_lock(&data->lock);
-        data->max_duty_at_overheat = temp;
+        data->max_duty_at_overheat = !!temp;
         reg = i2c_smbus_read_byte_data(client, ADT7473_REG_CFG4);
         if (temp)
                 reg |= ADT7473_CFG4_MAX_DUTY_AT_OVT;
diff --git a/drivers/hwmon/dme1737.c b/drivers/hwmon/dme1737.c
index 7673f65877e1..5e2cf0aef480 100644
--- a/drivers/hwmon/dme1737.c
+++ b/drivers/hwmon/dme1737.c
@@ -48,6 +48,11 @@ static unsigned short force_id;
 module_param(force_id, ushort, 0);
 MODULE_PARM_DESC(force_id, "Override the detected device ID");
 
+static int probe_all_addr;
+module_param(probe_all_addr, bool, 0);
+MODULE_PARM_DESC(probe_all_addr, "Include probing of non-standard LPC "
+                 "addresses");
+
 /* Addresses to scan */
 static const unsigned short normal_i2c[] = {0x2c, 0x2d, 0x2e, I2C_CLIENT_END};
 
@@ -176,6 +181,7 @@ struct dme1737_data {
         int valid;                      /* !=0 if following fields are valid */
         unsigned long last_update;      /* in jiffies */
         unsigned long last_vbat;        /* in jiffies */
+        enum chips type;
 
         u8 vid;
         u8 pwm_rr_en;
@@ -210,20 +216,27 @@ struct dme1737_data {
 };
 
 /* Nominal voltage values */
-static const int IN_NOMINAL[] = {5000, 2250, 3300, 5000, 12000, 3300, 3300};
+static const int IN_NOMINAL_DME1737[] = {5000, 2250, 3300, 5000, 12000, 3300,
+                                         3300};
+static const int IN_NOMINAL_SCH311x[] = {2500, 1500, 3300, 5000, 12000, 3300,
+                                         3300};
+#define IN_NOMINAL(ix, type)    (((type) == dme1737) ? \
+                                IN_NOMINAL_DME1737[(ix)] : \
+                                IN_NOMINAL_SCH311x[(ix)])
 
 /* Voltage input
  * Voltage inputs have 16 bits resolution, limit values have 8 bits
  * resolution. */
-static inline int IN_FROM_REG(int reg, int ix, int res)
+static inline int IN_FROM_REG(int reg, int ix, int res, int type)
 {
-        return (reg * IN_NOMINAL[ix] + (3 << (res - 3))) / (3 << (res - 2));
+        return (reg * IN_NOMINAL(ix, type) + (3 << (res - 3))) /
+                (3 << (res - 2));
 }
 
-static inline int IN_TO_REG(int val, int ix)
+static inline int IN_TO_REG(int val, int ix, int type)
 {
-        return SENSORS_LIMIT((val * 192 + IN_NOMINAL[ix] / 2) /
-                             IN_NOMINAL[ix], 0, 255);
+        return SENSORS_LIMIT((val * 192 + IN_NOMINAL(ix, type) / 2) /
+                             IN_NOMINAL(ix, type), 0, 255);
 }
 
 /* Temperature input
@@ -722,13 +735,13 @@ static ssize_t show_in(struct device *dev, struct device_attribute *attr,
 
         switch (fn) {
         case SYS_IN_INPUT:
-                res = IN_FROM_REG(data->in[ix], ix, 16);
+                res = IN_FROM_REG(data->in[ix], ix, 16, data->type);
                 break;
         case SYS_IN_MIN:
-                res = IN_FROM_REG(data->in_min[ix], ix, 8);
+                res = IN_FROM_REG(data->in_min[ix], ix, 8, data->type);
                 break;
         case SYS_IN_MAX:
-                res = IN_FROM_REG(data->in_max[ix], ix, 8);
+                res = IN_FROM_REG(data->in_max[ix], ix, 8, data->type);
                 break;
         case SYS_IN_ALARM:
                 res = (data->alarms >> DME1737_BIT_ALARM_IN[ix]) & 0x01;
@@ -755,12 +768,12 @@ static ssize_t set_in(struct device *dev, struct device_attribute *attr,
         mutex_lock(&data->update_lock);
         switch (fn) {
         case SYS_IN_MIN:
-                data->in_min[ix] = IN_TO_REG(val, ix);
+                data->in_min[ix] = IN_TO_REG(val, ix, data->type);
                 dme1737_write(client, DME1737_REG_IN_MIN(ix),
                               data->in_min[ix]);
                 break;
         case SYS_IN_MAX:
-                data->in_max[ix] = IN_TO_REG(val, ix);
+                data->in_max[ix] = IN_TO_REG(val, ix, data->type);
                 dme1737_write(client, DME1737_REG_IN_MAX(ix),
                               data->in_max[ix]);
                 break;
@@ -1501,9 +1514,9 @@ SENSOR_DEVICE_ATTR_PWM_1TO3(3);
 /* PWMs 5-6 */
 
 #define SENSOR_DEVICE_ATTR_PWM_5TO6(ix) \
-static SENSOR_DEVICE_ATTR_2(pwm##ix, S_IRUGO | S_IWUSR, \
+static SENSOR_DEVICE_ATTR_2(pwm##ix, S_IRUGO, \
         show_pwm, set_pwm, SYS_PWM, ix-1); \
-static SENSOR_DEVICE_ATTR_2(pwm##ix##_freq, S_IRUGO | S_IWUSR, \
+static SENSOR_DEVICE_ATTR_2(pwm##ix##_freq, S_IRUGO, \
         show_pwm, set_pwm, SYS_PWM_FREQ, ix-1); \
 static SENSOR_DEVICE_ATTR_2(pwm##ix##_enable, S_IRUGO, \
         show_pwm, NULL, SYS_PWM_ENABLE, ix-1)
@@ -1517,91 +1530,75 @@ static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm, set_vrm);
 static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL);
 static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);   /* for ISA devices */
 
-#define SENSOR_DEV_ATTR_IN(ix) \
-&sensor_dev_attr_in##ix##_input.dev_attr.attr, \
-&sensor_dev_attr_in##ix##_min.dev_attr.attr, \
-&sensor_dev_attr_in##ix##_max.dev_attr.attr, \
-&sensor_dev_attr_in##ix##_alarm.dev_attr.attr
-
-/* These attributes are read-writeable only if the chip is *not* locked */
-#define SENSOR_DEV_ATTR_TEMP_LOCK(ix) \
-&sensor_dev_attr_temp##ix##_offset.dev_attr.attr
-
-#define SENSOR_DEV_ATTR_TEMP(ix) \
-SENSOR_DEV_ATTR_TEMP_LOCK(ix), \
-&sensor_dev_attr_temp##ix##_input.dev_attr.attr, \
-&sensor_dev_attr_temp##ix##_min.dev_attr.attr, \
-&sensor_dev_attr_temp##ix##_max.dev_attr.attr, \
-&sensor_dev_attr_temp##ix##_alarm.dev_attr.attr, \
-&sensor_dev_attr_temp##ix##_fault.dev_attr.attr
-
-/* These attributes are read-writeable only if the chip is *not* locked */
-#define SENSOR_DEV_ATTR_ZONE_LOCK(ix) \
-&sensor_dev_attr_zone##ix##_auto_point1_temp_hyst.dev_attr.attr, \
-&sensor_dev_attr_zone##ix##_auto_point1_temp.dev_attr.attr, \
-&sensor_dev_attr_zone##ix##_auto_point2_temp.dev_attr.attr, \
-&sensor_dev_attr_zone##ix##_auto_point3_temp.dev_attr.attr
-
-#define SENSOR_DEV_ATTR_ZONE(ix) \
-SENSOR_DEV_ATTR_ZONE_LOCK(ix), \
-&sensor_dev_attr_zone##ix##_auto_channels_temp.dev_attr.attr
-
-#define SENSOR_DEV_ATTR_FAN_1TO4(ix) \
-&sensor_dev_attr_fan##ix##_input.dev_attr.attr, \
-&sensor_dev_attr_fan##ix##_min.dev_attr.attr, \
-&sensor_dev_attr_fan##ix##_alarm.dev_attr.attr, \
-&sensor_dev_attr_fan##ix##_type.dev_attr.attr
-
-#define SENSOR_DEV_ATTR_FAN_5TO6(ix) \
-&sensor_dev_attr_fan##ix##_input.dev_attr.attr, \
-&sensor_dev_attr_fan##ix##_min.dev_attr.attr, \
-&sensor_dev_attr_fan##ix##_alarm.dev_attr.attr, \
-&sensor_dev_attr_fan##ix##_max.dev_attr.attr
-
-/* These attributes are read-writeable only if the chip is *not* locked */
-#define SENSOR_DEV_ATTR_PWM_1TO3_LOCK(ix) \
-&sensor_dev_attr_pwm##ix##_freq.dev_attr.attr, \
-&sensor_dev_attr_pwm##ix##_enable.dev_attr.attr, \
-&sensor_dev_attr_pwm##ix##_ramp_rate.dev_attr.attr, \
-&sensor_dev_attr_pwm##ix##_auto_channels_zone.dev_attr.attr, \
-&sensor_dev_attr_pwm##ix##_auto_pwm_min.dev_attr.attr, \
-&sensor_dev_attr_pwm##ix##_auto_point1_pwm.dev_attr.attr
-
-#define SENSOR_DEV_ATTR_PWM_1TO3(ix) \
-SENSOR_DEV_ATTR_PWM_1TO3_LOCK(ix), \
-&sensor_dev_attr_pwm##ix.dev_attr.attr, \
-&sensor_dev_attr_pwm##ix##_auto_point2_pwm.dev_attr.attr
-
-/* These attributes are read-writeable only if the chip is *not* locked */
-#define SENSOR_DEV_ATTR_PWM_5TO6_LOCK(ix) \
-&sensor_dev_attr_pwm##ix.dev_attr.attr, \
-&sensor_dev_attr_pwm##ix##_freq.dev_attr.attr
-
-#define SENSOR_DEV_ATTR_PWM_5TO6(ix) \
-SENSOR_DEV_ATTR_PWM_5TO6_LOCK(ix), \
-&sensor_dev_attr_pwm##ix##_enable.dev_attr.attr
-
 /* This struct holds all the attributes that are always present and need to be
  * created unconditionally. The attributes that need modification of their
  * permissions are created read-only and write permissions are added or removed
  * on the fly when required */
 static struct attribute *dme1737_attr[] ={
         /* Voltages */
-        SENSOR_DEV_ATTR_IN(0),
-        SENSOR_DEV_ATTR_IN(1),
-        SENSOR_DEV_ATTR_IN(2),
-        SENSOR_DEV_ATTR_IN(3),
-        SENSOR_DEV_ATTR_IN(4),
-        SENSOR_DEV_ATTR_IN(5),
-        SENSOR_DEV_ATTR_IN(6),
+        &sensor_dev_attr_in0_input.dev_attr.attr,
+        &sensor_dev_attr_in0_min.dev_attr.attr,
+        &sensor_dev_attr_in0_max.dev_attr.attr,
+        &sensor_dev_attr_in0_alarm.dev_attr.attr,
+        &sensor_dev_attr_in1_input.dev_attr.attr,
+        &sensor_dev_attr_in1_min.dev_attr.attr,
+        &sensor_dev_attr_in1_max.dev_attr.attr,
+        &sensor_dev_attr_in1_alarm.dev_attr.attr,
+        &sensor_dev_attr_in2_input.dev_attr.attr,
+        &sensor_dev_attr_in2_min.dev_attr.attr,
+        &sensor_dev_attr_in2_max.dev_attr.attr,
+        &sensor_dev_attr_in2_alarm.dev_attr.attr,
+        &sensor_dev_attr_in3_input.dev_attr.attr,
+        &sensor_dev_attr_in3_min.dev_attr.attr,
+        &sensor_dev_attr_in3_max.dev_attr.attr,
+        &sensor_dev_attr_in3_alarm.dev_attr.attr,
+        &sensor_dev_attr_in4_input.dev_attr.attr,
+        &sensor_dev_attr_in4_min.dev_attr.attr,
+        &sensor_dev_attr_in4_max.dev_attr.attr,
+        &sensor_dev_attr_in4_alarm.dev_attr.attr,
+        &sensor_dev_attr_in5_input.dev_attr.attr,
+        &sensor_dev_attr_in5_min.dev_attr.attr,
+        &sensor_dev_attr_in5_max.dev_attr.attr,
+        &sensor_dev_attr_in5_alarm.dev_attr.attr,
+        &sensor_dev_attr_in6_input.dev_attr.attr,
+        &sensor_dev_attr_in6_min.dev_attr.attr,
+        &sensor_dev_attr_in6_max.dev_attr.attr,
+        &sensor_dev_attr_in6_alarm.dev_attr.attr,
         /* Temperatures */
-        SENSOR_DEV_ATTR_TEMP(1),
-        SENSOR_DEV_ATTR_TEMP(2),
-        SENSOR_DEV_ATTR_TEMP(3),
+        &sensor_dev_attr_temp1_input.dev_attr.attr,
+        &sensor_dev_attr_temp1_min.dev_attr.attr,
+        &sensor_dev_attr_temp1_max.dev_attr.attr,
+        &sensor_dev_attr_temp1_alarm.dev_attr.attr,
+        &sensor_dev_attr_temp1_fault.dev_attr.attr,
+        &sensor_dev_attr_temp1_offset.dev_attr.attr,
+        &sensor_dev_attr_temp2_input.dev_attr.attr,
+        &sensor_dev_attr_temp2_min.dev_attr.attr,
+        &sensor_dev_attr_temp2_max.dev_attr.attr,
+        &sensor_dev_attr_temp2_alarm.dev_attr.attr,
+        &sensor_dev_attr_temp2_fault.dev_attr.attr,
+        &sensor_dev_attr_temp2_offset.dev_attr.attr,
+        &sensor_dev_attr_temp3_input.dev_attr.attr,
+        &sensor_dev_attr_temp3_min.dev_attr.attr,
+        &sensor_dev_attr_temp3_max.dev_attr.attr,
+        &sensor_dev_attr_temp3_alarm.dev_attr.attr,
+        &sensor_dev_attr_temp3_fault.dev_attr.attr,
+        &sensor_dev_attr_temp3_offset.dev_attr.attr,
         /* Zones */
-        SENSOR_DEV_ATTR_ZONE(1),
-        SENSOR_DEV_ATTR_ZONE(2),
-        SENSOR_DEV_ATTR_ZONE(3),
+        &sensor_dev_attr_zone1_auto_point1_temp_hyst.dev_attr.attr,
+        &sensor_dev_attr_zone1_auto_point1_temp.dev_attr.attr,
+        &sensor_dev_attr_zone1_auto_point2_temp.dev_attr.attr,
+        &sensor_dev_attr_zone1_auto_point3_temp.dev_attr.attr,
+        &sensor_dev_attr_zone1_auto_channels_temp.dev_attr.attr,
+        &sensor_dev_attr_zone2_auto_point1_temp_hyst.dev_attr.attr,
+        &sensor_dev_attr_zone2_auto_point1_temp.dev_attr.attr,
+        &sensor_dev_attr_zone2_auto_point2_temp.dev_attr.attr,
+        &sensor_dev_attr_zone2_auto_point3_temp.dev_attr.attr,
+        &sensor_dev_attr_zone2_auto_channels_temp.dev_attr.attr,
+        &sensor_dev_attr_zone3_auto_point1_temp_hyst.dev_attr.attr,
+        &sensor_dev_attr_zone3_auto_point1_temp.dev_attr.attr,
+        &sensor_dev_attr_zone3_auto_point2_temp.dev_attr.attr,
+        &sensor_dev_attr_zone3_auto_point3_temp.dev_attr.attr,
+        &sensor_dev_attr_zone3_auto_channels_temp.dev_attr.attr,
         /* Misc */
         &dev_attr_vrm.attr,
         &dev_attr_cpu0_vid.attr,
@@ -1616,23 +1613,48 @@ static const struct attribute_group dme1737_group = {
  * Their creation depends on the chip configuration which is determined during
  * module load. */
 static struct attribute *dme1737_attr_pwm1[] = {
-        SENSOR_DEV_ATTR_PWM_1TO3(1),
+        &sensor_dev_attr_pwm1.dev_attr.attr,
+        &sensor_dev_attr_pwm1_freq.dev_attr.attr,
+        &sensor_dev_attr_pwm1_enable.dev_attr.attr,
+        &sensor_dev_attr_pwm1_ramp_rate.dev_attr.attr,
+        &sensor_dev_attr_pwm1_auto_channels_zone.dev_attr.attr,
+        &sensor_dev_attr_pwm1_auto_pwm_min.dev_attr.attr,
+        &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr,
+        &sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr,
         NULL
 };
 static struct attribute *dme1737_attr_pwm2[] = {
-        SENSOR_DEV_ATTR_PWM_1TO3(2),
+        &sensor_dev_attr_pwm2.dev_attr.attr,
+        &sensor_dev_attr_pwm2_freq.dev_attr.attr,
+        &sensor_dev_attr_pwm2_enable.dev_attr.attr,
+        &sensor_dev_attr_pwm2_ramp_rate.dev_attr.attr,
+        &sensor_dev_attr_pwm2_auto_channels_zone.dev_attr.attr,
+        &sensor_dev_attr_pwm2_auto_pwm_min.dev_attr.attr,
+        &sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr,
+        &sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr,
         NULL
 };
 static struct attribute *dme1737_attr_pwm3[] = {
-        SENSOR_DEV_ATTR_PWM_1TO3(3),
+        &sensor_dev_attr_pwm3.dev_attr.attr,
+        &sensor_dev_attr_pwm3_freq.dev_attr.attr,
+        &sensor_dev_attr_pwm3_enable.dev_attr.attr,
+        &sensor_dev_attr_pwm3_ramp_rate.dev_attr.attr,
+        &sensor_dev_attr_pwm3_auto_channels_zone.dev_attr.attr,
+        &sensor_dev_attr_pwm3_auto_pwm_min.dev_attr.attr,
+        &sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr,
+        &sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr,
         NULL
 };
 static struct attribute *dme1737_attr_pwm5[] = {
-        SENSOR_DEV_ATTR_PWM_5TO6(5),
+        &sensor_dev_attr_pwm5.dev_attr.attr,
+        &sensor_dev_attr_pwm5_freq.dev_attr.attr,
+        &sensor_dev_attr_pwm5_enable.dev_attr.attr,
         NULL
 };
 static struct attribute *dme1737_attr_pwm6[] = {
-        SENSOR_DEV_ATTR_PWM_5TO6(6),
+        &sensor_dev_attr_pwm6.dev_attr.attr,
+        &sensor_dev_attr_pwm6_freq.dev_attr.attr,
+        &sensor_dev_attr_pwm6_enable.dev_attr.attr,
         NULL
 };
 
@@ -1649,27 +1671,45 @@ static const struct attribute_group dme1737_pwm_group[] = {
  * Their creation depends on the chip configuration which is determined during
  * module load. */
 static struct attribute *dme1737_attr_fan1[] = {
-        SENSOR_DEV_ATTR_FAN_1TO4(1),
+        &sensor_dev_attr_fan1_input.dev_attr.attr,
+        &sensor_dev_attr_fan1_min.dev_attr.attr,
+        &sensor_dev_attr_fan1_alarm.dev_attr.attr,
+        &sensor_dev_attr_fan1_type.dev_attr.attr,
         NULL
 };
 static struct attribute *dme1737_attr_fan2[] = {
-        SENSOR_DEV_ATTR_FAN_1TO4(2),
+        &sensor_dev_attr_fan2_input.dev_attr.attr,
+        &sensor_dev_attr_fan2_min.dev_attr.attr,
+        &sensor_dev_attr_fan2_alarm.dev_attr.attr,
+        &sensor_dev_attr_fan2_type.dev_attr.attr,
         NULL
 };
 static struct attribute *dme1737_attr_fan3[] = {
-        SENSOR_DEV_ATTR_FAN_1TO4(3),
+        &sensor_dev_attr_fan3_input.dev_attr.attr,
+        &sensor_dev_attr_fan3_min.dev_attr.attr,
+        &sensor_dev_attr_fan3_alarm.dev_attr.attr,
+        &sensor_dev_attr_fan3_type.dev_attr.attr,
         NULL
 };
 static struct attribute *dme1737_attr_fan4[] = {
-        SENSOR_DEV_ATTR_FAN_1TO4(4),
+        &sensor_dev_attr_fan4_input.dev_attr.attr,
+        &sensor_dev_attr_fan4_min.dev_attr.attr,
+        &sensor_dev_attr_fan4_alarm.dev_attr.attr,
+        &sensor_dev_attr_fan4_type.dev_attr.attr,
         NULL
 };
 static struct attribute *dme1737_attr_fan5[] = {
-        SENSOR_DEV_ATTR_FAN_5TO6(5),
+        &sensor_dev_attr_fan5_input.dev_attr.attr,
+        &sensor_dev_attr_fan5_min.dev_attr.attr,
+        &sensor_dev_attr_fan5_alarm.dev_attr.attr,
+        &sensor_dev_attr_fan5_max.dev_attr.attr,
         NULL
 };
 static struct attribute *dme1737_attr_fan6[] = {
-        SENSOR_DEV_ATTR_FAN_5TO6(6),
+        &sensor_dev_attr_fan6_input.dev_attr.attr,
+        &sensor_dev_attr_fan6_min.dev_attr.attr,
+        &sensor_dev_attr_fan6_alarm.dev_attr.attr,
+        &sensor_dev_attr_fan6_max.dev_attr.attr,
         NULL
 };
 
@@ -1686,13 +1726,22 @@ static const struct attribute_group dme1737_fan_group[] = {
  * writeable if the chip is *not* locked. Otherwise they stay read-only. */
 static struct attribute *dme1737_attr_lock[] = {
         /* Temperatures */
-        SENSOR_DEV_ATTR_TEMP_LOCK(1),
-        SENSOR_DEV_ATTR_TEMP_LOCK(2),
-        SENSOR_DEV_ATTR_TEMP_LOCK(3),
+        &sensor_dev_attr_temp1_offset.dev_attr.attr,
+        &sensor_dev_attr_temp2_offset.dev_attr.attr,
+        &sensor_dev_attr_temp3_offset.dev_attr.attr,
         /* Zones */
-        SENSOR_DEV_ATTR_ZONE_LOCK(1),
-        SENSOR_DEV_ATTR_ZONE_LOCK(2),
-        SENSOR_DEV_ATTR_ZONE_LOCK(3),
+        &sensor_dev_attr_zone1_auto_point1_temp_hyst.dev_attr.attr,
+        &sensor_dev_attr_zone1_auto_point1_temp.dev_attr.attr,
+        &sensor_dev_attr_zone1_auto_point2_temp.dev_attr.attr,
+        &sensor_dev_attr_zone1_auto_point3_temp.dev_attr.attr,
+        &sensor_dev_attr_zone2_auto_point1_temp_hyst.dev_attr.attr,
+        &sensor_dev_attr_zone2_auto_point1_temp.dev_attr.attr,
+        &sensor_dev_attr_zone2_auto_point2_temp.dev_attr.attr,
+        &sensor_dev_attr_zone2_auto_point3_temp.dev_attr.attr,
+        &sensor_dev_attr_zone3_auto_point1_temp_hyst.dev_attr.attr,
+        &sensor_dev_attr_zone3_auto_point1_temp.dev_attr.attr,
+        &sensor_dev_attr_zone3_auto_point2_temp.dev_attr.attr,
+        &sensor_dev_attr_zone3_auto_point3_temp.dev_attr.attr,
         NULL
 };
 
@@ -1704,23 +1753,40 @@ static const struct attribute_group dme1737_lock_group = {
  * writeable if the chip is *not* locked and the respective PWM is available.
  * Otherwise they stay read-only. */
 static struct attribute *dme1737_attr_pwm1_lock[] = {
-        SENSOR_DEV_ATTR_PWM_1TO3_LOCK(1),
+        &sensor_dev_attr_pwm1_freq.dev_attr.attr,
+        &sensor_dev_attr_pwm1_enable.dev_attr.attr,
+        &sensor_dev_attr_pwm1_ramp_rate.dev_attr.attr,
+        &sensor_dev_attr_pwm1_auto_channels_zone.dev_attr.attr,
+        &sensor_dev_attr_pwm1_auto_pwm_min.dev_attr.attr,
+        &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr,
         NULL
 };
 static struct attribute *dme1737_attr_pwm2_lock[] = {
-        SENSOR_DEV_ATTR_PWM_1TO3_LOCK(2),
+        &sensor_dev_attr_pwm2_freq.dev_attr.attr,
+        &sensor_dev_attr_pwm2_enable.dev_attr.attr,
+        &sensor_dev_attr_pwm2_ramp_rate.dev_attr.attr,
+        &sensor_dev_attr_pwm2_auto_channels_zone.dev_attr.attr,
+        &sensor_dev_attr_pwm2_auto_pwm_min.dev_attr.attr,
+        &sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr,
         NULL
 };
 static struct attribute *dme1737_attr_pwm3_lock[] = {
-        SENSOR_DEV_ATTR_PWM_1TO3_LOCK(3),
+        &sensor_dev_attr_pwm3_freq.dev_attr.attr,
+        &sensor_dev_attr_pwm3_enable.dev_attr.attr,
+        &sensor_dev_attr_pwm3_ramp_rate.dev_attr.attr,
+        &sensor_dev_attr_pwm3_auto_channels_zone.dev_attr.attr,
+        &sensor_dev_attr_pwm3_auto_pwm_min.dev_attr.attr,
+        &sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr,
         NULL
 };
 static struct attribute *dme1737_attr_pwm5_lock[] = {
-        SENSOR_DEV_ATTR_PWM_5TO6_LOCK(5),
+        &sensor_dev_attr_pwm5.dev_attr.attr,
+        &sensor_dev_attr_pwm5_freq.dev_attr.attr,
         NULL
 };
 static struct attribute *dme1737_attr_pwm6_lock[] = {
-        SENSOR_DEV_ATTR_PWM_5TO6_LOCK(6),
+        &sensor_dev_attr_pwm6.dev_attr.attr,
+        &sensor_dev_attr_pwm6_freq.dev_attr.attr,
         NULL
 };
 
@@ -2109,6 +2175,7 @@ static int dme1737_i2c_detect(struct i2c_adapter *adapter, int address,
 
         kind = dme1737;
         name = "dme1737";
+        data->type = kind;
 
         /* Fill in the remaining client fields and put it into the global
          * list */
@@ -2301,6 +2368,7 @@ static int __devinit dme1737_isa_probe(struct platform_device *pdev)
                 err = -ENODEV;
                 goto exit_kfree;
         }
+        data->type = -1;
 
         /* Fill in the remaining client fields and initialize the mutex */
         strlcpy(client->name, "sch311x", I2C_NAME_SIZE);
@@ -2377,7 +2445,10 @@ static int __init dme1737_init(void)
         }
 
         if (dme1737_isa_detect(0x2e, &addr) &&
-            dme1737_isa_detect(0x4e, &addr)) {
+            dme1737_isa_detect(0x4e, &addr) &&
+            (!probe_all_addr ||
+             (dme1737_isa_detect(0x162e, &addr) &&
+              dme1737_isa_detect(0x164e, &addr)))) {
                 /* Return 0 if we didn't find an ISA device */
                 return 0;
         }
diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c
index de698dc73020..7880c273c2c5 100644
--- a/drivers/hwmon/lm75.c
+++ b/drivers/hwmon/lm75.c
@@ -30,14 +30,37 @@
 #include "lm75.h"
 
 
-/* Addresses to scan */
+/*
+ * This driver handles the LM75 and compatible digital temperature sensors.
+ * Only types which are _not_ listed in I2C_CLIENT_INSMOD_*() need to be
+ * listed here.  We start at 9 since I2C_CLIENT_INSMOD_*() currently allow
+ * definition of up to 8 chip types (plus zero).
+ */
+
+enum lm75_type {                /* keep sorted in alphabetical order */
+        ds1775 = 9,
+        ds75,
+        /* lm75 -- in I2C_CLIENT_INSMOD_1() */
+        lm75a,
+        max6625,
+        max6626,
+        mcp980x,
+        stds75,
+        tcn75,
+        tmp100,
+        tmp101,
+        tmp175,
+        tmp275,
+        tmp75,
+};
+
+/* Addresses scanned by legacy style driver binding */
 static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c,
                                         0x4d, 0x4e, 0x4f, I2C_CLIENT_END };
 
-/* Insmod parameters */
+/* Insmod parameters (only for legacy style driver binding) */
 I2C_CLIENT_INSMOD_1(lm75);
 
-/* Many LM75 constants specified below */
 
 /* The LM75 registers */
 #define LM75_REG_CONF           0x01
@@ -49,10 +72,11 @@ static const u8 LM75_REG_TEMP[3] = {
 
 /* Each client has this additional data */
 struct lm75_data {
-        struct i2c_client       client;
-        struct device *hwmon_dev;
+        struct i2c_client       *client;
+        struct device           *hwmon_dev;
         struct mutex            update_lock;
-        char                    valid;          /* !=0 if following fields are valid */
+        u8                      orig_conf;
+        char                    valid;          /* !=0 if registers are valid */
         unsigned long           last_updated;   /* In jiffies */
         u16                     temp[3];        /* Register values,
                                                    0 = input
@@ -60,23 +84,14 @@ struct lm75_data {
                                                    2 = hyst */
 };
 
-static int lm75_attach_adapter(struct i2c_adapter *adapter);
-static int lm75_detect(struct i2c_adapter *adapter, int address, int kind);
-static void lm75_init_client(struct i2c_client *client);
-static int lm75_detach_client(struct i2c_client *client);
 static int lm75_read_value(struct i2c_client *client, u8 reg);
 static int lm75_write_value(struct i2c_client *client, u8 reg, u16 value);
 static struct lm75_data *lm75_update_device(struct device *dev);
 
 
-/* This is the driver that will be inserted */
-static struct i2c_driver lm75_driver = {
-        .driver = {
-                .name   = "lm75",
-        },
-        .attach_adapter = lm75_attach_adapter,
-        .detach_client  = lm75_detach_client,
-};
+/*-----------------------------------------------------------------------*/
+
+/* sysfs attributes for hwmon */
 
 static ssize_t show_temp(struct device *dev, struct device_attribute *da,
                          char *buf)
@@ -109,13 +124,6 @@ static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO,
                         show_temp, set_temp, 2);
 static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
 
-static int lm75_attach_adapter(struct i2c_adapter *adapter)
-{
-        if (!(adapter->class & I2C_CLASS_HWMON))
-                return 0;
-        return i2c_probe(adapter, &addr_data, lm75_detect);
-}
-
 static struct attribute *lm75_attributes[] = {
         &sensor_dev_attr_temp1_input.dev_attr.attr,
         &sensor_dev_attr_temp1_max.dev_attr.attr,
@@ -128,32 +136,144 @@ static const struct attribute_group lm75_group = {
         .attrs = lm75_attributes,
 };
 
+/*-----------------------------------------------------------------------*/
+
+/* "New style" I2C driver binding -- following the driver model */
+
+static int
+lm75_probe(struct i2c_client *client, const struct i2c_device_id *id)
+{
+        struct lm75_data *data;
+        int status;
+        u8 set_mask, clr_mask;
+        int new;
+
+        if (!i2c_check_functionality(client->adapter,
+                        I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA))
+                return -EIO;
+
+        data = kzalloc(sizeof(struct lm75_data), GFP_KERNEL);
+        if (!data)
+                return -ENOMEM;
+
+        i2c_set_clientdata(client, data);
+
+        data->client = client;
+        mutex_init(&data->update_lock);
+
+        /* Set to LM75 resolution (9 bits, 1/2 degree C) and range.
+         * Then tweak to be more precise when appropriate.
+         */
+        set_mask = 0;
+        clr_mask = (1 << 0)                     /* continuous conversions */
+                | (1 << 6) | (1 << 5);          /* 9-bit mode */
+
+        /* configure as specified */
+        status = lm75_read_value(client, LM75_REG_CONF);
+        if (status < 0) {
+                dev_dbg(&client->dev, "Can't read config? %d\n", status);
+                goto exit_free;
+        }
+        data->orig_conf = status;
+        new = status & ~clr_mask;
+        new |= set_mask;
+        if (status != new)
+                lm75_write_value(client, LM75_REG_CONF, new);
+        dev_dbg(&client->dev, "Config %02x\n", new);
+
+        /* Register sysfs hooks */
+        status = sysfs_create_group(&client->dev.kobj, &lm75_group);
+        if (status)
+                goto exit_free;
+
+        data->hwmon_dev = hwmon_device_register(&client->dev);
+        if (IS_ERR(data->hwmon_dev)) {
+                status = PTR_ERR(data->hwmon_dev);
+                goto exit_remove;
+        }
+
+        dev_info(&client->dev, "%s: sensor '%s'\n",
+                data->hwmon_dev->bus_id, client->name);
+
+        return 0;
+
+exit_remove:
+        sysfs_remove_group(&client->dev.kobj, &lm75_group);
+exit_free:
+        i2c_set_clientdata(client, NULL);
+        kfree(data);
+        return status;
+}
+
+static int lm75_remove(struct i2c_client *client)
+{
+        struct lm75_data *data = i2c_get_clientdata(client);
+
+        hwmon_device_unregister(data->hwmon_dev);
+        sysfs_remove_group(&client->dev.kobj, &lm75_group);
+        lm75_write_value(client, LM75_REG_CONF, data->orig_conf);
+        i2c_set_clientdata(client, NULL);
+        kfree(data);
+        return 0;
+}
+
+static const struct i2c_device_id lm75_ids[] = {
+        { "ds1775", ds1775, },
+        { "ds75", ds75, },
+        { "lm75", lm75, },
+        { "lm75a", lm75a, },
+        { "max6625", max6625, },
+        { "max6626", max6626, },
+        { "mcp980x", mcp980x, },
+        { "stds75", stds75, },
+        { "tcn75", tcn75, },
+        { "tmp100", tmp100, },
+        { "tmp101", tmp101, },
+        { "tmp175", tmp175, },
+        { "tmp275", tmp275, },
+        { "tmp75", tmp75, },
+        { /* LIST END */ }
+};
+MODULE_DEVICE_TABLE(i2c, lm75_ids);
+
+static struct i2c_driver lm75_driver = {
+        .driver = {
+                .name   = "lm75",
+        },
+        .probe          = lm75_probe,
+        .remove         = lm75_remove,
+        .id_table       = lm75_ids,
+};
+
+/*-----------------------------------------------------------------------*/
+
+/* "Legacy" I2C driver binding */
+
+static struct i2c_driver lm75_legacy_driver;
+
 /* This function is called by i2c_probe */
 static int lm75_detect(struct i2c_adapter *adapter, int address, int kind)
 {
         int i;
         struct i2c_client *new_client;
-        struct lm75_data *data;
         int err = 0;
-        const char *name = "";
 
         if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
                                      I2C_FUNC_SMBUS_WORD_DATA))
                 goto exit;
 
-        /* OK. For now, we presume we have a valid client. We now create the
-           client structure, even though we cannot fill it completely yet.
-           But it allows us to access lm75_{read,write}_value. */
-        if (!(data = kzalloc(sizeof(struct lm75_data), GFP_KERNEL))) {
+        /* OK. For now, we presume we have a valid address. We create the
+           client structure, even though there may be no sensor present.
+           But it allows us to use i2c_smbus_read_*_data() calls. */
+        new_client = kzalloc(sizeof *new_client, GFP_KERNEL);
+        if (!new_client) {
                 err = -ENOMEM;
                 goto exit;
         }
 
-        new_client = &data->client;
-        i2c_set_clientdata(new_client, data);
         new_client->addr = address;
         new_client->adapter = adapter;
-        new_client->driver = &lm75_driver;
+        new_client->driver = &lm75_legacy_driver;
         new_client->flags = 0;
 
         /* Now, we do the remaining detection. There is no identification-
@@ -174,17 +294,17 @@ static int lm75_detect(struct i2c_adapter *adapter, int address, int kind)
                  || i2c_smbus_read_word_data(new_client, 5) != hyst
                  || i2c_smbus_read_word_data(new_client, 6) != hyst
                  || i2c_smbus_read_word_data(new_client, 7) != hyst)
-                        goto exit_free;
+                        goto exit_free;
                 os = i2c_smbus_read_word_data(new_client, 3);
                 if (i2c_smbus_read_word_data(new_client, 4) != os
                  || i2c_smbus_read_word_data(new_client, 5) != os
                  || i2c_smbus_read_word_data(new_client, 6) != os
                  || i2c_smbus_read_word_data(new_client, 7) != os)
-                        goto exit_free;
+                        goto exit_free;
 
                 /* Unused bits */
                 if (conf & 0xe0)
-                        goto exit_free;
+                        goto exit_free;
 
                 /* Addresses cycling */
                 for (i = 8; i < 0xff; i += 8)
@@ -194,58 +314,57 @@ static int lm75_detect(struct i2c_adapter *adapter, int address, int kind)
                                 goto exit_free;
         }
 
-        /* Determine the chip type - only one kind supported! */
-        if (kind <= 0)
-                kind = lm75;
-
-        if (kind == lm75) {
-                name = "lm75";
-        }
-
-        /* Fill in the remaining client fields and put it into the global list */
-        strlcpy(new_client->name, name, I2C_NAME_SIZE);
-        data->valid = 0;
-        mutex_init(&data->update_lock);
+        /* NOTE: we treat "force=..." and "force_lm75=..." the same.
+         * Only new-style driver binding distinguishes chip types.
+         */
+        strlcpy(new_client->name, "lm75", I2C_NAME_SIZE);
 
         /* Tell the I2C layer a new client has arrived */
-        if ((err = i2c_attach_client(new_client)))
+        err = i2c_attach_client(new_client);
+        if (err)
                 goto exit_free;
 
-        /* Initialize the LM75 chip */
-        lm75_init_client(new_client);
-        
-        /* Register sysfs hooks */
-        if ((err = sysfs_create_group(&new_client->dev.kobj, &lm75_group)))
+        err = lm75_probe(new_client, NULL);
+        if (err < 0)
                 goto exit_detach;
 
-        data->hwmon_dev = hwmon_device_register(&new_client->dev);
-        if (IS_ERR(data->hwmon_dev)) {
-                err = PTR_ERR(data->hwmon_dev);
-                goto exit_remove;
-        }
-
         return 0;
 
-exit_remove:
-        sysfs_remove_group(&new_client->dev.kobj, &lm75_group);
 exit_detach:
         i2c_detach_client(new_client);
 exit_free:
-        kfree(data);
+        kfree(new_client);
 exit:
         return err;
 }
 
+static int lm75_attach_adapter(struct i2c_adapter *adapter)
+{
+        if (!(adapter->class & I2C_CLASS_HWMON))
+                return 0;
+        return i2c_probe(adapter, &addr_data, lm75_detect);
+}
+
 static int lm75_detach_client(struct i2c_client *client)
 {
-        struct lm75_data *data = i2c_get_clientdata(client);
-        hwmon_device_unregister(data->hwmon_dev);
-        sysfs_remove_group(&client->dev.kobj, &lm75_group);
+        lm75_remove(client);
         i2c_detach_client(client);
-        kfree(data);
+        kfree(client);
         return 0;
 }
 
+static struct i2c_driver lm75_legacy_driver = {
+        .driver = {
+                .name   = "lm75_legacy",
+        },
+        .attach_adapter = lm75_attach_adapter,
+        .detach_client  = lm75_detach_client,
+};
+
+/*-----------------------------------------------------------------------*/
+
+/* register access */
+
 /* All registers are word-sized, except for the configuration register.
    LM75 uses a high-byte first convention, which is exactly opposite to
    the SMBus standard. */
@@ -268,16 +387,6 @@ static int lm75_write_value(struct i2c_client *client, u8 reg, u16 value)
                 return i2c_smbus_write_word_data(client, reg, swab16(value));
 }
 
-static void lm75_init_client(struct i2c_client *client)
-{
-        int reg;
-
-        /* Enable if in shutdown mode */
-        reg = lm75_read_value(client, LM75_REG_CONF);
-        if (reg >= 0 && (reg & 0x01))
-                lm75_write_value(client, LM75_REG_CONF, reg & 0xfe);
-}
-
 static struct lm75_data *lm75_update_device(struct device *dev)
 {
         struct i2c_client *client = to_i2c_client(dev);
@@ -309,13 +418,28 @@ static struct lm75_data *lm75_update_device(struct device *dev)
         return data;
 }
 
+/*-----------------------------------------------------------------------*/
+
+/* module glue */
+
 static int __init sensors_lm75_init(void)
 {
-        return i2c_add_driver(&lm75_driver);
+        int status;
+
+        status = i2c_add_driver(&lm75_driver);
+        if (status < 0)
+                return status;
+
+        status = i2c_add_driver(&lm75_legacy_driver);
+        if (status < 0)
+                i2c_del_driver(&lm75_driver);
+
+        return status;
 }
 
 static void __exit sensors_lm75_exit(void)
 {
+        i2c_del_driver(&lm75_legacy_driver);
         i2c_del_driver(&lm75_driver);
 }
 
diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c
index ee5eca1c1921..12d446f54f97 100644
--- a/drivers/hwmon/lm85.c
+++ b/drivers/hwmon/lm85.c
@@ -1,7 +1,7 @@
 /*
     lm85.c - Part of lm_sensors, Linux kernel modules for hardware
              monitoring
-    Copyright (c) 1998, 1999  Frodo Looijaard <frodol@dds.nl> 
+    Copyright (c) 1998, 1999  Frodo Looijaard <frodol@dds.nl>
     Copyright (c) 2002, 2003  Philip Pokorny <ppokorny@penguincomputing.com>
     Copyright (c) 2003        Margit Schubert-While <margitsw@t-online.de>
     Copyright (c) 2004        Justin Thiessen <jthiessen@penguincomputing.com>
@@ -51,24 +51,17 @@ I2C_CLIENT_INSMOD_6(lm85b, lm85c, adm1027, adt7463, emc6d100, emc6d102);
 #define LM85_REG_TEMP_MAX(nr)           (0x4f + (nr) * 2)
 
 /* Fan speeds are LSB, MSB (2 bytes) */
-#define LM85_REG_FAN(nr)                (0x28 + (nr) *2)
-#define LM85_REG_FAN_MIN(nr)            (0x54 + (nr) *2)
+#define LM85_REG_FAN(nr)                (0x28 + (nr) * 2)
+#define LM85_REG_FAN_MIN(nr)            (0x54 + (nr) * 2)
 
 #define LM85_REG_PWM(nr)                (0x30 + (nr))
 
-#define ADT7463_REG_OPPOINT(nr)         (0x33 + (nr))
-
-#define ADT7463_REG_TMIN_CTL1           0x36
-#define ADT7463_REG_TMIN_CTL2           0x37
-
-#define LM85_REG_DEVICE                 0x3d
 #define LM85_REG_COMPANY                0x3e
 #define LM85_REG_VERSTEP                0x3f
 /* These are the recognized values for the above regs */
-#define LM85_DEVICE_ADX                 0x27
 #define LM85_COMPANY_NATIONAL           0x01
 #define LM85_COMPANY_ANALOG_DEV         0x41
-#define LM85_COMPANY_SMSC               0x5c
+#define LM85_COMPANY_SMSC               0x5c
 #define LM85_VERSTEP_VMASK              0xf0
 #define LM85_VERSTEP_GENERIC            0x60
 #define LM85_VERSTEP_LM85C              0x60
@@ -91,58 +84,45 @@ I2C_CLIENT_INSMOD_6(lm85b, lm85c, adm1027, adt7463, emc6d100, emc6d102);
 #define LM85_REG_AFAN_CONFIG(nr)        (0x5c + (nr))
 #define LM85_REG_AFAN_RANGE(nr)         (0x5f + (nr))
 #define LM85_REG_AFAN_SPIKE1            0x62
-#define LM85_REG_AFAN_SPIKE2            0x63
 #define LM85_REG_AFAN_MINPWM(nr)        (0x64 + (nr))
 #define LM85_REG_AFAN_LIMIT(nr)         (0x67 + (nr))
 #define LM85_REG_AFAN_CRITICAL(nr)      (0x6a + (nr))
 #define LM85_REG_AFAN_HYST1             0x6d
 #define LM85_REG_AFAN_HYST2             0x6e
 
-#define LM85_REG_TACH_MODE              0x74
-#define LM85_REG_SPINUP_CTL             0x75
-
-#define ADM1027_REG_TEMP_OFFSET(nr)     (0x70 + (nr))
-#define ADM1027_REG_CONFIG2             0x73
-#define ADM1027_REG_INTMASK1            0x74
-#define ADM1027_REG_INTMASK2            0x75
 #define ADM1027_REG_EXTEND_ADC1         0x76
 #define ADM1027_REG_EXTEND_ADC2         0x77
-#define ADM1027_REG_CONFIG3             0x78
-#define ADM1027_REG_FAN_PPR             0x7b
-
-#define ADT7463_REG_THERM               0x79
-#define ADT7463_REG_THERM_LIMIT         0x7A
 
 #define EMC6D100_REG_ALARM3             0x7d
 /* IN5, IN6 and IN7 */
-#define EMC6D100_REG_IN(nr)             (0x70 + ((nr)-5))
-#define EMC6D100_REG_IN_MIN(nr)         (0x73 + ((nr)-5) * 2)
-#define EMC6D100_REG_IN_MAX(nr)         (0x74 + ((nr)-5) * 2)
+#define EMC6D100_REG_IN(nr)             (0x70 + ((nr) - 5))
+#define EMC6D100_REG_IN_MIN(nr)         (0x73 + ((nr) - 5) * 2)
+#define EMC6D100_REG_IN_MAX(nr)         (0x74 + ((nr) - 5) * 2)
 #define EMC6D102_REG_EXTEND_ADC1        0x85
 #define EMC6D102_REG_EXTEND_ADC2        0x86
 #define EMC6D102_REG_EXTEND_ADC3        0x87
 #define EMC6D102_REG_EXTEND_ADC4        0x88
 
 
-/* Conversions. Rounding and limit checking is only done on the TO_REG 
+/* Conversions. Rounding and limit checking is only done on the TO_REG
    variants. Note that you should be a bit careful with which arguments
    these macros are called: arguments may be evaluated more than once.
  */
 
 /* IN are scaled acording to built-in resistors */
-static int lm85_scaling[] = {  /* .001 Volts */
-                2500, 2250, 3300, 5000, 12000,
-                3300, 1500, 1800 /*EMC6D100*/
-        };
-#define SCALE(val,from,to)              (((val)*(to) + ((from)/2))/(from))
+static const int lm85_scaling[] = {  /* .001 Volts */
+        2500, 2250, 3300, 5000, 12000,
+        3300, 1500, 1800 /*EMC6D100*/
+};
+#define SCALE(val, from, to)    (((val) * (to) + ((from) / 2)) / (from))
 
-#define INS_TO_REG(n,val)       \
-                SENSORS_LIMIT(SCALE(val,lm85_scaling[n],192),0,255)
+#define INS_TO_REG(n, val)      \
+                SENSORS_LIMIT(SCALE(val, lm85_scaling[n], 192), 0, 255)
 
-#define INSEXT_FROM_REG(n,val,ext)      \
+#define INSEXT_FROM_REG(n, val, ext)    \
                 SCALE(((val) << 4) + (ext), 192 << 4, lm85_scaling[n])
 
-#define INS_FROM_REG(n,val)     SCALE((val), 192, lm85_scaling[n])
+#define INS_FROM_REG(n, val)    SCALE((val), 192, lm85_scaling[n])
 
 /* FAN speed is measured using 90kHz clock */
 static inline u16 FAN_TO_REG(unsigned long val)
@@ -151,16 +131,17 @@ static inline u16 FAN_TO_REG(unsigned long val)
                 return 0xffff;
         return SENSORS_LIMIT(5400000 / val, 1, 0xfffe);
 }
-#define FAN_FROM_REG(val)       ((val)==0?-1:(val)==0xffff?0:5400000/(val))
+#define FAN_FROM_REG(val)       ((val) == 0 ? -1 : (val) == 0xffff ? 0 : \
+                                 5400000 / (val))
 
 /* Temperature is reported in .001 degC increments */
 #define TEMP_TO_REG(val)        \
-                SENSORS_LIMIT(SCALE(val,1000,1),-127,127)
-#define TEMPEXT_FROM_REG(val,ext)       \
+                SENSORS_LIMIT(SCALE(val, 1000, 1), -127, 127)
+#define TEMPEXT_FROM_REG(val, ext)      \
                 SCALE(((val) << 4) + (ext), 16, 1000)
 #define TEMP_FROM_REG(val)      ((val) * 1000)
 
-#define PWM_TO_REG(val)                 (SENSORS_LIMIT(val,0,255))
+#define PWM_TO_REG(val)                 SENSORS_LIMIT(val, 0, 255)
 #define PWM_FROM_REG(val)               (val)
 
 
@@ -183,17 +164,17 @@ static inline u16 FAN_TO_REG(unsigned long val)
  */
 
 /* These are the zone temperature range encodings in .001 degree C */
-static int lm85_range_map[] = {   
-                2000,  2500,  3300,  4000,  5000,  6600,
-                8000, 10000, 13300, 16000, 20000, 26600,
-                32000, 40000, 53300, 80000
-        };
-static int RANGE_TO_REG( int range )
+static const int lm85_range_map[] = {
+        2000, 2500, 3300, 4000, 5000, 6600, 8000, 10000,
+        13300, 16000, 20000, 26600, 32000, 40000, 53300, 80000
+};
+
+static int RANGE_TO_REG(int range)
 {
         int i;
 
         if (range >= lm85_range_map[15])
-                return 15 ;
+                return 15;
 
         /* Find the closest match */
         for (i = 14; i >= 0; --i) {
@@ -207,28 +188,25 @@ static int RANGE_TO_REG( int range )
 
         return 0;
 }
-#define RANGE_FROM_REG(val) (lm85_range_map[(val)&0x0f])
+#define RANGE_FROM_REG(val)     lm85_range_map[(val) & 0x0f]
 
-/* These are the Acoustic Enhancement, or Temperature smoothing encodings
- * NOTE: The enable/disable bit is INCLUDED in these encodings as the
- *       MSB (bit 3, value 8).  If the enable bit is 0, the encoded value
- *       is ignored, or set to 0.
- */
 /* These are the PWM frequency encodings */
-static int lm85_freq_map[] = { /* .1 Hz */
-                100, 150, 230, 300, 380, 470, 620, 940
-        };
-static int FREQ_TO_REG( int freq )
+static const int lm85_freq_map[] = { /* .1 Hz */
+        100, 150, 230, 300, 380, 470, 620, 940
+};
+
+static int FREQ_TO_REG(int freq)
 {
         int i;
 
-        if( freq >= lm85_freq_map[7] ) { return 7 ; }
-        for( i = 0 ; i < 7 ; ++i )
-                if( freq <= lm85_freq_map[i] )
-                        break ;
-        return( i & 0x07 );
+        if (freq >= lm85_freq_map[7])
+                return 7;
+        for (i = 0; i < 7; ++i)
+                if (freq <= lm85_freq_map[i])
+                        break;
+        return i;
 }
-#define FREQ_FROM_REG(val) (lm85_freq_map[(val)&0x07])
+#define FREQ_FROM_REG(val)      lm85_freq_map[(val) & 0x07]
 
 /* Since we can't use strings, I'm abusing these numbers
  *   to stand in for the following meanings:
@@ -242,30 +220,23 @@ static int FREQ_TO_REG( int freq )
  *     -2 -- PWM responds to manual control
  */
 
-static int lm85_zone_map[] = { 1, 2, 3, -1, 0, 23, 123, -2 };
-#define ZONE_FROM_REG(val) (lm85_zone_map[((val)>>5)&0x07])
+static const int lm85_zone_map[] = { 1, 2, 3, -1, 0, 23, 123, -2 };
+#define ZONE_FROM_REG(val)      lm85_zone_map[(val) >> 5]
 
-static int ZONE_TO_REG( int zone )
+static int ZONE_TO_REG(int zone)
 {
         int i;
 
-        for( i = 0 ; i <= 7 ; ++i )
-                if( zone == lm85_zone_map[i] )
-                        break ;
-        if( i > 7 )   /* Not found. */
+        for (i = 0; i <= 7; ++i)
+                if (zone == lm85_zone_map[i])
+                        break;
+        if (i > 7)   /* Not found. */
                 i = 3;  /* Always 100% */
-        return( (i & 0x07)<<5 );
+        return i << 5;
 }
 
-#define HYST_TO_REG(val) (SENSORS_LIMIT(((val)+500)/1000,0,15))
-#define HYST_FROM_REG(val) ((val)*1000)
-
-#define OFFSET_TO_REG(val) (SENSORS_LIMIT((val)/25,-127,127))
-#define OFFSET_FROM_REG(val) ((val)*25)
-
-#define PPR_MASK(fan) (0x03<<(fan *2))
-#define PPR_TO_REG(val,fan) (SENSORS_LIMIT((val)-1,0,3)<<(fan *2))
-#define PPR_FROM_REG(val,fan) ((((val)>>(fan * 2))&0x03)+1)
+#define HYST_TO_REG(val)        SENSORS_LIMIT(((val) + 500) / 1000, 0, 15)
+#define HYST_FROM_REG(val)      ((val) * 1000)
 
 /* Chip sampling rates
  *
@@ -292,11 +263,11 @@ struct lm85_zone {
         u8 hyst;        /* Low limit hysteresis. (0-15) */
         u8 range;       /* Temp range, encoded */
         s8 critical;    /* "All fans ON" temp limit */
-        u8 off_desired; /* Actual "off" temperature specified.  Preserved 
+        u8 off_desired; /* Actual "off" temperature specified.  Preserved
                          * to prevent "drift" as other autofan control
                          * values change.
                          */
-        u8 max_desired; /* Actual "max" temperature specified.  Preserved 
+        u8 max_desired; /* Actual "max" temperature specified.  Preserved
                          * to prevent "drift" as other autofan control
                          * values change.
                          */
@@ -327,23 +298,13 @@ struct lm85_data {
         s8 temp[3];             /* Register value */
         s8 temp_min[3];         /* Register value */
         s8 temp_max[3];         /* Register value */
-        s8 temp_offset[3];      /* Register value */
         u16 fan[4];             /* Register value */
         u16 fan_min[4];         /* Register value */
         u8 pwm[3];              /* Register value */
-        u8 spinup_ctl;          /* Register encoding, combined */
-        u8 tach_mode;           /* Register encoding, combined */
         u8 temp_ext[3];         /* Decoded values */
         u8 in_ext[8];           /* Decoded values */
-        u8 fan_ppr;             /* Register value */
-        u8 smooth[3];           /* Register encoding */
         u8 vid;                 /* Register value */
         u8 vrm;                 /* VRM version */
-        u8 syncpwm3;            /* Saved PWM3 for TACH 2,3,4 config */
-        u8 oppoint[3];          /* Register value */
-        u16 tmin_ctl;           /* Register value */
-        unsigned long therm_total; /* Cummulative therm count */
-        u8 therm_limit;         /* Register value */
         u32 alarms;             /* Register encoding, combined */
         struct lm85_autofan autofan[3];
         struct lm85_zone zone[3];
@@ -355,9 +316,8 @@ static int lm85_detect(struct i2c_adapter *adapter, int address,
 static int lm85_detach_client(struct i2c_client *client);
 
 static int lm85_read_value(struct i2c_client *client, u8 reg);
-static int lm85_write_value(struct i2c_client *client, u8 reg, int value);
+static void lm85_write_value(struct i2c_client *client, u8 reg, int value);
 static struct lm85_data *lm85_update_device(struct device *dev);
-static void lm85_init_client(struct i2c_client *client);
 
 
 static struct i2c_driver lm85_driver = {
@@ -375,7 +335,7 @@ static ssize_t show_fan(struct device *dev, struct device_attribute *attr,
 {
         int nr = to_sensor_dev_attr(attr)->index;
         struct lm85_data *data = lm85_update_device(dev);
-        return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan[nr]) );
+        return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[nr]));
 }
 
 static ssize_t show_fan_min(struct device *dev, struct device_attribute *attr,
@@ -383,7 +343,7 @@ static ssize_t show_fan_min(struct device *dev, struct device_attribute *attr,
 {
         int nr = to_sensor_dev_attr(attr)->index;
         struct lm85_data *data = lm85_update_device(dev);
-        return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan_min[nr]) );
+        return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[nr]));
 }
 
 static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr,
@@ -414,7 +374,8 @@ show_fan_offset(4);
 
 /* vid, vrm, alarms */
 
-static ssize_t show_vid_reg(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t show_vid_reg(struct device *dev, struct device_attribute *attr,
+                char *buf)
 {
         struct lm85_data *data = lm85_update_device(dev);
         int vid;
@@ -432,13 +393,15 @@ static ssize_t show_vid_reg(struct device *dev, struct device_attribute *attr, c
 
 static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL);
 
-static ssize_t show_vrm_reg(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t show_vrm_reg(struct device *dev, struct device_attribute *attr,
+                char *buf)
 {
         struct lm85_data *data = dev_get_drvdata(dev);
         return sprintf(buf, "%ld\n", (long) data->vrm);
 }
 
-static ssize_t store_vrm_reg(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+static ssize_t store_vrm_reg(struct device *dev, struct device_attribute *attr,
+                const char *buf, size_t count)
 {
         struct lm85_data *data = dev_get_drvdata(dev);
         data->vrm = simple_strtoul(buf, NULL, 10);
@@ -447,7 +410,8 @@ static ssize_t store_vrm_reg(struct device *dev, struct device_attribute *attr,
 
 static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg);
 
-static ssize_t show_alarms_reg(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t show_alarms_reg(struct device *dev, struct device_attribute
+                *attr, char *buf)
 {
         struct lm85_data *data = lm85_update_device(dev);
         return sprintf(buf, "%u\n", data->alarms);
@@ -488,7 +452,7 @@ static ssize_t show_pwm(struct device *dev, struct device_attribute *attr,
 {
         int nr = to_sensor_dev_attr(attr)->index;
         struct lm85_data *data = lm85_update_device(dev);
-        return sprintf(buf,"%d\n", PWM_FROM_REG(data->pwm[nr]) );
+        return sprintf(buf, "%d\n", PWM_FROM_REG(data->pwm[nr]));
 }
 
 static ssize_t set_pwm(struct device *dev, struct device_attribute *attr,
@@ -581,17 +545,16 @@ static ssize_t show_in(struct device *dev, struct device_attribute *attr,
 {
         int nr = to_sensor_dev_attr(attr)->index;
         struct lm85_data *data = lm85_update_device(dev);
-        return sprintf( buf, "%d\n", INSEXT_FROM_REG(nr,
-                                                     data->in[nr],
-                                                     data->in_ext[nr]));
+        return sprintf(buf, "%d\n", INSEXT_FROM_REG(nr, data->in[nr],
+                                                    data->in_ext[nr]));
 }
 
-static ssize_t show_in_min(struct device *dev,  struct device_attribute *attr,
+static ssize_t show_in_min(struct device *dev, struct device_attribute *attr,
                 char *buf)
 {
         int nr = to_sensor_dev_attr(attr)->index;
         struct lm85_data *data = lm85_update_device(dev);
-        return sprintf(buf,"%d\n", INS_FROM_REG(nr, data->in_min[nr]) );
+        return sprintf(buf, "%d\n", INS_FROM_REG(nr, data->in_min[nr]));
 }
 
 static ssize_t set_in_min(struct device *dev, struct device_attribute *attr,
@@ -614,7 +577,7 @@ static ssize_t show_in_max(struct device *dev, struct device_attribute *attr,
 {
         int nr = to_sensor_dev_attr(attr)->index;
         struct lm85_data *data = lm85_update_device(dev);
-        return sprintf(buf,"%d\n", INS_FROM_REG(nr, data->in_max[nr]) );
+        return sprintf(buf, "%d\n", INS_FROM_REG(nr, data->in_max[nr]));
 }
 
 static ssize_t set_in_max(struct device *dev, struct device_attribute *attr,
@@ -656,8 +619,8 @@ static ssize_t show_temp(struct device *dev, struct device_attribute *attr,
 {
         int nr = to_sensor_dev_attr(attr)->index;
         struct lm85_data *data = lm85_update_device(dev);
-        return sprintf(buf,"%d\n", TEMPEXT_FROM_REG(data->temp[nr],
-                                                    data->temp_ext[nr]));
+        return sprintf(buf, "%d\n", TEMPEXT_FROM_REG(data->temp[nr],
+                                                     data->temp_ext[nr]));
 }
 
 static ssize_t show_temp_min(struct device *dev, struct device_attribute *attr,
@@ -665,7 +628,7 @@ static ssize_t show_temp_min(struct device *dev, struct device_attribute *attr,
 {
         int nr = to_sensor_dev_attr(attr)->index;
         struct lm85_data *data = lm85_update_device(dev);
-        return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp_min[nr]) );
+        return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_min[nr]));
 }
 
 static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr,
@@ -688,7 +651,7 @@ static ssize_t show_temp_max(struct device *dev, struct device_attribute *attr,
 {
         int nr = to_sensor_dev_attr(attr)->index;
         struct lm85_data *data = lm85_update_device(dev);
-        return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp_max[nr]) );
+        return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max[nr]));
 }
 
 static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr,
@@ -697,7 +660,7 @@ static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr,
         int nr = to_sensor_dev_attr(attr)->index;
         struct i2c_client *client = to_i2c_client(dev);
         struct lm85_data *data = i2c_get_clientdata(client);
-        long val = simple_strtol(buf, NULL, 10);        
+        long val = simple_strtol(buf, NULL, 10);
 
         mutex_lock(&data->update_lock);
         data->temp_max[nr] = TEMP_TO_REG(val);
@@ -726,7 +689,7 @@ static ssize_t show_pwm_auto_channels(struct device *dev,
 {
         int nr = to_sensor_dev_attr(attr)->index;
         struct lm85_data *data = lm85_update_device(dev);
-        return sprintf(buf,"%d\n", ZONE_FROM_REG(data->autofan[nr].config));
+        return sprintf(buf, "%d\n", ZONE_FROM_REG(data->autofan[nr].config));
 }
 
 static ssize_t set_pwm_auto_channels(struct device *dev,
@@ -735,11 +698,11 @@ static ssize_t set_pwm_auto_channels(struct device *dev,
         int nr = to_sensor_dev_attr(attr)->index;
         struct i2c_client *client = to_i2c_client(dev);
         struct lm85_data *data = i2c_get_clientdata(client);
-        long val = simple_strtol(buf, NULL, 10);   
+        long val = simple_strtol(buf, NULL, 10);
 
         mutex_lock(&data->update_lock);
         data->autofan[nr].config = (data->autofan[nr].config & (~0xe0))
-                | ZONE_TO_REG(val) ;
+                | ZONE_TO_REG(val);
         lm85_write_value(client, LM85_REG_AFAN_CONFIG(nr),
                 data->autofan[nr].config);
         mutex_unlock(&data->update_lock);
@@ -751,7 +714,7 @@ static ssize_t show_pwm_auto_pwm_min(struct device *dev,
 {
         int nr = to_sensor_dev_attr(attr)->index;
         struct lm85_data *data = lm85_update_device(dev);
-        return sprintf(buf,"%d\n", PWM_FROM_REG(data->autofan[nr].min_pwm));
+        return sprintf(buf, "%d\n", PWM_FROM_REG(data->autofan[nr].min_pwm));
 }
 
 static ssize_t set_pwm_auto_pwm_min(struct device *dev,
@@ -775,7 +738,7 @@ static ssize_t show_pwm_auto_pwm_minctl(struct device *dev,
 {
         int nr = to_sensor_dev_attr(attr)->index;
         struct lm85_data *data = lm85_update_device(dev);
-        return sprintf(buf,"%d\n", data->autofan[nr].min_off);
+        return sprintf(buf, "%d\n", data->autofan[nr].min_off);
 }
 
 static ssize_t set_pwm_auto_pwm_minctl(struct device *dev,
@@ -785,15 +748,15 @@ static ssize_t set_pwm_auto_pwm_minctl(struct device *dev,
         struct i2c_client *client = to_i2c_client(dev);
         struct lm85_data *data = i2c_get_clientdata(client);
         long val = simple_strtol(buf, NULL, 10);
+        u8 tmp;
 
         mutex_lock(&data->update_lock);
         data->autofan[nr].min_off = val;
-        lm85_write_value(client, LM85_REG_AFAN_SPIKE1, data->smooth[0]
-                | data->syncpwm3
-                | (data->autofan[0].min_off ? 0x20 : 0)
-                | (data->autofan[1].min_off ? 0x40 : 0)
-                | (data->autofan[2].min_off ? 0x80 : 0)
-        );
+        tmp = lm85_read_value(client, LM85_REG_AFAN_SPIKE1);
+        tmp &= ~(0x20 << nr);
+        if (data->autofan[nr].min_off)
+                tmp |= 0x20 << nr;
+        lm85_write_value(client, LM85_REG_AFAN_SPIKE1, tmp);
         mutex_unlock(&data->update_lock);
         return count;
 }
@@ -803,7 +766,7 @@ static ssize_t show_pwm_auto_pwm_freq(struct device *dev,
 {
         int nr = to_sensor_dev_attr(attr)->index;
         struct lm85_data *data = lm85_update_device(dev);
-        return sprintf(buf,"%d\n", FREQ_FROM_REG(data->autofan[nr].freq));
+        return sprintf(buf, "%d\n", FREQ_FROM_REG(data->autofan[nr].freq));
 }
 
 static ssize_t set_pwm_auto_pwm_freq(struct device *dev,
@@ -818,8 +781,7 @@ static ssize_t set_pwm_auto_pwm_freq(struct device *dev,
         data->autofan[nr].freq = FREQ_TO_REG(val);
         lm85_write_value(client, LM85_REG_AFAN_RANGE(nr),
                 (data->zone[nr].range << 4)
-                | data->autofan[nr].freq
-        ); 
+                | data->autofan[nr].freq);
         mutex_unlock(&data->update_lock);
         return count;
 }
@@ -849,7 +811,7 @@ static ssize_t show_temp_auto_temp_off(struct device *dev,
 {
         int nr = to_sensor_dev_attr(attr)->index;
         struct lm85_data *data = lm85_update_device(dev);
-        return sprintf(buf,"%d\n", TEMP_FROM_REG(data->zone[nr].limit) -
+        return sprintf(buf, "%d\n", TEMP_FROM_REG(data->zone[nr].limit) -
                 HYST_FROM_REG(data->zone[nr].hyst));
 }
 
@@ -866,15 +828,13 @@ static ssize_t set_temp_auto_temp_off(struct device *dev,
         min = TEMP_FROM_REG(data->zone[nr].limit);
         data->zone[nr].off_desired = TEMP_TO_REG(val);
         data->zone[nr].hyst = HYST_TO_REG(min - val);
-        if ( nr == 0 || nr == 1 ) {
+        if (nr == 0 || nr == 1) {
                 lm85_write_value(client, LM85_REG_AFAN_HYST1,
                         (data->zone[0].hyst << 4)
-                        | data->zone[1].hyst
-                        );
+                        | data->zone[1].hyst);
         } else {
                 lm85_write_value(client, LM85_REG_AFAN_HYST2,
-                        (data->zone[2].hyst << 4)
-                );
+                        (data->zone[2].hyst << 4));
         }
         mutex_unlock(&data->update_lock);
         return count;
@@ -885,7 +845,7 @@ static ssize_t show_temp_auto_temp_min(struct device *dev,
 {
         int nr = to_sensor_dev_attr(attr)->index;
         struct lm85_data *data = lm85_update_device(dev);
-        return sprintf(buf,"%d\n", TEMP_FROM_REG(data->zone[nr].limit) );
+        return sprintf(buf, "%d\n", TEMP_FROM_REG(data->zone[nr].limit));
 }
 
 static ssize_t set_temp_auto_temp_min(struct device *dev,
@@ -913,15 +873,13 @@ static ssize_t set_temp_auto_temp_min(struct device *dev,
         data->zone[nr].hyst = HYST_TO_REG(TEMP_FROM_REG(
                 data->zone[nr].limit) - TEMP_FROM_REG(
                 data->zone[nr].off_desired));
-        if ( nr == 0 || nr == 1 ) {
+        if (nr == 0 || nr == 1) {
                 lm85_write_value(client, LM85_REG_AFAN_HYST1,
                         (data->zone[0].hyst << 4)
-                        | data->zone[1].hyst
-                        );
+                        | data->zone[1].hyst);
         } else {
                 lm85_write_value(client, LM85_REG_AFAN_HYST2,
-                        (data->zone[2].hyst << 4)
-                );
+                        (data->zone[2].hyst << 4));
         }
         mutex_unlock(&data->update_lock);
         return count;
@@ -932,7 +890,7 @@ static ssize_t show_temp_auto_temp_max(struct device *dev,
 {
         int nr = to_sensor_dev_attr(attr)->index;
         struct lm85_data *data = lm85_update_device(dev);
-        return sprintf(buf,"%d\n", TEMP_FROM_REG(data->zone[nr].limit) +
+        return sprintf(buf, "%d\n", TEMP_FROM_REG(data->zone[nr].limit) +
                 RANGE_FROM_REG(data->zone[nr].range));
 }
 
@@ -962,11 +920,11 @@ static ssize_t show_temp_auto_temp_crit(struct device *dev,
 {
         int nr = to_sensor_dev_attr(attr)->index;
         struct lm85_data *data = lm85_update_device(dev);
-        return sprintf(buf,"%d\n", TEMP_FROM_REG(data->zone[nr].critical));
+        return sprintf(buf, "%d\n", TEMP_FROM_REG(data->zone[nr].critical));
 }
 
 static ssize_t set_temp_auto_temp_crit(struct device *dev,
-                struct device_attribute *attr,const char *buf, size_t count)
+                struct device_attribute *attr, const char *buf, size_t count)
 {
         int nr = to_sensor_dev_attr(attr)->index;
         struct i2c_client *client = to_i2c_client(dev);
@@ -1127,20 +1085,37 @@ static const struct attribute_group lm85_group_in567 = {
         .attrs = lm85_attributes_in567,
 };
 
+static void lm85_init_client(struct i2c_client *client)
+{
+        int value;
+
+        /* Start monitoring if needed */
+        value = lm85_read_value(client, LM85_REG_CONFIG);
+        if (!(value & 0x01)) {
+                dev_info(&client->dev, "Starting monitoring\n");
+                lm85_write_value(client, LM85_REG_CONFIG, value | 0x01);
+        }
+
+        /* Warn about unusual configuration bits */
+        if (value & 0x02)
+                dev_warn(&client->dev, "Device configuration is locked\n");
+        if (!(value & 0x04))
+                dev_warn(&client->dev, "Device is not ready\n");
+}
+
 static int lm85_detect(struct i2c_adapter *adapter, int address,
                 int kind)
 {
-        int company, verstep ;
-        struct i2c_client *new_client = NULL;
+        int company, verstep;
+        struct i2c_client *client;
         struct lm85_data *data;
         int err = 0;
-        const char *type_name = "";
+        const char *type_name;
 
-        if (!i2c_check_functionality(adapter,
-                                        I2C_FUNC_SMBUS_BYTE_DATA)) {
+        if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
                 /* We need to be able to do byte I/O */
-                goto ERROR0 ;
-        };
+                goto ERROR0;
+        }
 
         /* OK. For now, we presume we have a valid client. We now create the
            client structure, even though we cannot fill it completely yet.
@@ -1151,138 +1126,145 @@ static int lm85_detect(struct i2c_adapter *adapter, int address,
                 goto ERROR0;
         }
 
-        new_client = &data->client;
-        i2c_set_clientdata(new_client, data);
-        new_client->addr = address;
-        new_client->adapter = adapter;
-        new_client->driver = &lm85_driver;
-        new_client->flags = 0;
+        client = &data->client;
+        i2c_set_clientdata(client, data);
+        client->addr = address;
+        client->adapter = adapter;
+        client->driver = &lm85_driver;
 
         /* Now, we do the remaining detection. */
 
-        company = lm85_read_value(new_client, LM85_REG_COMPANY);
-        verstep = lm85_read_value(new_client, LM85_REG_VERSTEP);
+        company = lm85_read_value(client, LM85_REG_COMPANY);
+        verstep = lm85_read_value(client, LM85_REG_VERSTEP);
 
         dev_dbg(&adapter->dev, "Detecting device at %d,0x%02x with"
                 " COMPANY: 0x%02x and VERSTEP: 0x%02x\n",
-                i2c_adapter_id(new_client->adapter), new_client->addr,
+                i2c_adapter_id(client->adapter), client->addr,
                 company, verstep);
 
         /* If auto-detecting, Determine the chip type. */
         if (kind <= 0) {
                 dev_dbg(&adapter->dev, "Autodetecting device at %d,0x%02x ...\n",
-                        i2c_adapter_id(adapter), address );
-                if( company == LM85_COMPANY_NATIONAL
-                    && verstep == LM85_VERSTEP_LM85C ) {
-                        kind = lm85c ;
-                } else if( company == LM85_COMPANY_NATIONAL
-                    && verstep == LM85_VERSTEP_LM85B ) {
-                        kind = lm85b ;
-                } else if( company == LM85_COMPANY_NATIONAL
-                    && (verstep & LM85_VERSTEP_VMASK) == LM85_VERSTEP_GENERIC ) {
+                        i2c_adapter_id(adapter), address);
+                if (company == LM85_COMPANY_NATIONAL
+                    && verstep == LM85_VERSTEP_LM85C) {
+                        kind = lm85c;
+                } else if (company == LM85_COMPANY_NATIONAL
+                    && verstep == LM85_VERSTEP_LM85B) {
+                        kind = lm85b;
+                } else if (company == LM85_COMPANY_NATIONAL
+                    && (verstep & LM85_VERSTEP_VMASK) == LM85_VERSTEP_GENERIC) {
                         dev_err(&adapter->dev, "Unrecognized version/stepping 0x%02x"
                                 " Defaulting to LM85.\n", verstep);
-                        kind = any_chip ;
-                } else if( company == LM85_COMPANY_ANALOG_DEV
-                    && verstep == LM85_VERSTEP_ADM1027 ) {
-                        kind = adm1027 ;
-                } else if( company == LM85_COMPANY_ANALOG_DEV
+                        kind = any_chip;
+                } else if (company == LM85_COMPANY_ANALOG_DEV
+                    && verstep == LM85_VERSTEP_ADM1027) {
+                        kind = adm1027;
+                } else if (company == LM85_COMPANY_ANALOG_DEV
                     && (verstep == LM85_VERSTEP_ADT7463
-                         || verstep == LM85_VERSTEP_ADT7463C) ) {
-                        kind = adt7463 ;
-                } else if( company == LM85_COMPANY_ANALOG_DEV
-                    && (verstep & LM85_VERSTEP_VMASK) == LM85_VERSTEP_GENERIC ) {
+                         || verstep == LM85_VERSTEP_ADT7463C)) {
+                        kind = adt7463;
+                } else if (company == LM85_COMPANY_ANALOG_DEV
+                    && (verstep & LM85_VERSTEP_VMASK) == LM85_VERSTEP_GENERIC) {
                         dev_err(&adapter->dev, "Unrecognized version/stepping 0x%02x"
-                                " Defaulting to Generic LM85.\n", verstep );
-                        kind = any_chip ;
-                } else if( company == LM85_COMPANY_SMSC
+                                " Defaulting to Generic LM85.\n", verstep);
+                        kind = any_chip;
+                } else if (company == LM85_COMPANY_SMSC
                     && (verstep == LM85_VERSTEP_EMC6D100_A0
-                         || verstep == LM85_VERSTEP_EMC6D100_A1) ) {
+                         || verstep == LM85_VERSTEP_EMC6D100_A1)) {
                         /* Unfortunately, we can't tell a '100 from a '101
                          * from the registers.  Since a '101 is a '100
                          * in a package with fewer pins and therefore no
                          * 3.3V, 1.5V or 1.8V inputs, perhaps if those
                          * inputs read 0, then it's a '101.
                          */
-                        kind = emc6d100 ;
-                } else if( company == LM85_COMPANY_SMSC
+                        kind = emc6d100;
+                } else if (company == LM85_COMPANY_SMSC
                     && verstep == LM85_VERSTEP_EMC6D102) {
-                        kind = emc6d102 ;
-                } else if( company == LM85_COMPANY_SMSC
+                        kind = emc6d102;
+                } else if (company == LM85_COMPANY_SMSC
                     && (verstep & LM85_VERSTEP_VMASK) == LM85_VERSTEP_GENERIC) {
                         dev_err(&adapter->dev, "lm85: Detected SMSC chip\n");
                         dev_err(&adapter->dev, "lm85: Unrecognized version/stepping 0x%02x"
-                            " Defaulting to Generic LM85.\n", verstep );
-                        kind = any_chip ;
-                } else if( kind == any_chip
+                            " Defaulting to Generic LM85.\n", verstep);
+                        kind = any_chip;
+                } else if (kind == any_chip
                     && (verstep & LM85_VERSTEP_VMASK) == LM85_VERSTEP_GENERIC) {
                         dev_err(&adapter->dev, "Generic LM85 Version 6 detected\n");
                         /* Leave kind as "any_chip" */
                 } else {
                         dev_dbg(&adapter->dev, "Autodetection failed\n");
-                        /* Not an LM85 ... */
-                        if( kind == any_chip ) {  /* User used force=x,y */
+                        /* Not an LM85... */
+                        if (kind == any_chip) {  /* User used force=x,y */
                                 dev_err(&adapter->dev, "Generic LM85 Version 6 not"
                                         " found at %d,0x%02x. Try force_lm85c.\n",
-                                        i2c_adapter_id(adapter), address );
+                                        i2c_adapter_id(adapter), address);
                         }
-                        err = 0 ;
+                        err = 0;
                         goto ERROR1;
                 }
         }
 
         /* Fill in the chip specific driver values */
-        if ( kind == any_chip ) {
-                type_name = "lm85";
-        } else if ( kind == lm85b ) {
+        switch (kind) {
+        case lm85b:
                 type_name = "lm85b";
-        } else if ( kind == lm85c ) {
+                break;
+        case lm85c:
                 type_name = "lm85c";
-        } else if ( kind == adm1027 ) {
+                break;
+        case adm1027:
                 type_name = "adm1027";
-        } else if ( kind == adt7463 ) {
+                break;
+        case adt7463:
                 type_name = "adt7463";
-        } else if ( kind == emc6d100){
+                break;
+        case emc6d100:
                 type_name = "emc6d100";
-        } else if ( kind == emc6d102 ) {
+                break;
+        case emc6d102:
                 type_name = "emc6d102";
+                break;
+        default:
+                type_name = "lm85";
         }
-        strlcpy(new_client->name, type_name, I2C_NAME_SIZE);
+        strlcpy(client->name, type_name, I2C_NAME_SIZE);
 
         /* Fill in the remaining client fields */
         data->type = kind;
-        data->valid = 0;
         mutex_init(&data->update_lock);
 
         /* Tell the I2C layer a new client has arrived */
-        if ((err = i2c_attach_client(new_client)))
+        err = i2c_attach_client(client);
+        if (err)
                 goto ERROR1;
 
         /* Set the VRM version */
         data->vrm = vid_which_vrm();
 
         /* Initialize the LM85 chip */
-        lm85_init_client(new_client);
+        lm85_init_client(client);
 
         /* Register sysfs hooks */
-        if ((err = sysfs_create_group(&new_client->dev.kobj, &lm85_group)))
+        err = sysfs_create_group(&client->dev.kobj, &lm85_group);
+        if (err)
                 goto ERROR2;
 
         /* The ADT7463 has an optional VRM 10 mode where pin 21 is used
            as a sixth digital VID input rather than an analog input. */
-        data->vid = lm85_read_value(new_client, LM85_REG_VID);
+        data->vid = lm85_read_value(client, LM85_REG_VID);
         if (!(kind == adt7463 && (data->vid & 0x80)))
-                if ((err = sysfs_create_group(&new_client->dev.kobj,
+                if ((err = sysfs_create_group(&client->dev.kobj,
                                         &lm85_group_in4)))
                         goto ERROR3;
 
         /* The EMC6D100 has 3 additional voltage inputs */
         if (kind == emc6d100)
-                if ((err = sysfs_create_group(&new_client->dev.kobj,
+                if ((err = sysfs_create_group(&client->dev.kobj,
                                         &lm85_group_in567)))
                         goto ERROR3;
 
-        data->hwmon_dev = hwmon_device_register(&new_client->dev);
+        data->hwmon_dev = hwmon_device_register(&client->dev);
         if (IS_ERR(data->hwmon_dev)) {
                 err = PTR_ERR(data->hwmon_dev);
                 goto ERROR3;
@@ -1291,16 +1273,16 @@ static int lm85_detect(struct i2c_adapter *adapter, int address,
         return 0;
 
         /* Error out and cleanup code */
-    ERROR3:
-        sysfs_remove_group(&new_client->dev.kobj, &lm85_group);
-        sysfs_remove_group(&new_client->dev.kobj, &lm85_group_in4);
+ ERROR3:
+        sysfs_remove_group(&client->dev.kobj, &lm85_group);
+        sysfs_remove_group(&client->dev.kobj, &lm85_group_in4);
         if (kind == emc6d100)
-                sysfs_remove_group(&new_client->dev.kobj, &lm85_group_in567);
-    ERROR2:
-        i2c_detach_client(new_client);
-    ERROR1:
+                sysfs_remove_group(&client->dev.kobj, &lm85_group_in567);
+ ERROR2:
+        i2c_detach_client(client);
+ ERROR1:
         kfree(data);
-    ERROR0:
+ ERROR0:
         return err;
 }
 
@@ -1323,100 +1305,46 @@ static int lm85_read_value(struct i2c_client *client, u8 reg)
         int res;
 
         /* What size location is it? */
-        switch( reg ) {
-        case LM85_REG_FAN(0) :  /* Read WORD data */
-        case LM85_REG_FAN(1) :
-        case LM85_REG_FAN(2) :
-        case LM85_REG_FAN(3) :
-        case LM85_REG_FAN_MIN(0) :
-        case LM85_REG_FAN_MIN(1) :
-        case LM85_REG_FAN_MIN(2) :
-        case LM85_REG_FAN_MIN(3) :
-        case LM85_REG_ALARM1 :  /* Read both bytes at once */
-                res = i2c_smbus_read_byte_data(client, reg) & 0xff ;
-                res |= i2c_smbus_read_byte_data(client, reg+1) << 8 ;
-                break ;
-        case ADT7463_REG_TMIN_CTL1 :  /* Read WORD MSB, LSB */
-                res = i2c_smbus_read_byte_data(client, reg) << 8 ;
-                res |= i2c_smbus_read_byte_data(client, reg+1) & 0xff ;
-                break ;
+        switch (reg) {
+        case LM85_REG_FAN(0):  /* Read WORD data */
+        case LM85_REG_FAN(1):
+        case LM85_REG_FAN(2):
+        case LM85_REG_FAN(3):
+        case LM85_REG_FAN_MIN(0):
+        case LM85_REG_FAN_MIN(1):
+        case LM85_REG_FAN_MIN(2):
+        case LM85_REG_FAN_MIN(3):
+        case LM85_REG_ALARM1:   /* Read both bytes at once */
+                res = i2c_smbus_read_byte_data(client, reg) & 0xff;
+                res |= i2c_smbus_read_byte_data(client, reg + 1) << 8;
+                break;
         default:        /* Read BYTE data */
                 res = i2c_smbus_read_byte_data(client, reg);
-                break ;
+                break;
         }
 
-        return res ;
+        return res;
 }
 
-static int lm85_write_value(struct i2c_client *client, u8 reg, int value)
+static void lm85_write_value(struct i2c_client *client, u8 reg, int value)
 {
-        int res ;
-
-        switch( reg ) {
-        case LM85_REG_FAN(0) :  /* Write WORD data */
-        case LM85_REG_FAN(1) :
-        case LM85_REG_FAN(2) :
-        case LM85_REG_FAN(3) :
-        case LM85_REG_FAN_MIN(0) :
-        case LM85_REG_FAN_MIN(1) :
-        case LM85_REG_FAN_MIN(2) :
-        case LM85_REG_FAN_MIN(3) :
+        switch (reg) {
+        case LM85_REG_FAN(0):  /* Write WORD data */
+        case LM85_REG_FAN(1):
+        case LM85_REG_FAN(2):
+        case LM85_REG_FAN(3):
+        case LM85_REG_FAN_MIN(0):
+        case LM85_REG_FAN_MIN(1):
+        case LM85_REG_FAN_MIN(2):
+        case LM85_REG_FAN_MIN(3):
         /* NOTE: ALARM is read only, so not included here */
-                res = i2c_smbus_write_byte_data(client, reg, value & 0xff) ;
-                res |= i2c_smbus_write_byte_data(client, reg+1, (value>>8) & 0xff) ;
-                break ;
-        case ADT7463_REG_TMIN_CTL1 :  /* Write WORD MSB, LSB */
-                res = i2c_smbus_write_byte_data(client, reg, (value>>8) & 0xff);
-                res |= i2c_smbus_write_byte_data(client, reg+1, value & 0xff) ;
-                break ;
+                i2c_smbus_write_byte_data(client, reg, value & 0xff);
+                i2c_smbus_write_byte_data(client, reg + 1, value >> 8);
+                break;
         default:        /* Write BYTE data */
-                res = i2c_smbus_write_byte_data(client, reg, value);
-                break ;
+                i2c_smbus_write_byte_data(client, reg, value);
+                break;
         }
-
-        return res ;
-}
-
-static void lm85_init_client(struct i2c_client *client)
-{
-        int value;
-        struct lm85_data *data = i2c_get_clientdata(client);
-
-        dev_dbg(&client->dev, "Initializing device\n");
-
-        /* Warn if part was not "READY" */
-        value = lm85_read_value(client, LM85_REG_CONFIG);
-        dev_dbg(&client->dev, "LM85_REG_CONFIG is: 0x%02x\n", value);
-        if( value & 0x02 ) {
-                dev_err(&client->dev, "Client (%d,0x%02x) config is locked.\n",
-                            i2c_adapter_id(client->adapter), client->addr );
-        };
-        if( ! (value & 0x04) ) {
-                dev_err(&client->dev, "Client (%d,0x%02x) is not ready.\n",
-                            i2c_adapter_id(client->adapter), client->addr );
-        };
-        if( value & 0x10
-            && ( data->type == adm1027
-                || data->type == adt7463 ) ) {
-                dev_err(&client->dev, "Client (%d,0x%02x) VxI mode is set.  "
-                        "Please report this to the lm85 maintainer.\n",
-                            i2c_adapter_id(client->adapter), client->addr );
-        };
-
-        /* WE INTENTIONALLY make no changes to the limits,
-         *   offsets, pwms, fans and zones.  If they were
-         *   configured, we don't want to mess with them.
-         *   If they weren't, the default is 100% PWM, no
-         *   control and will suffice until 'sensors -s'
-         *   can be run by the user.
-         */
-
-        /* Start monitoring */
-        value = lm85_read_value(client, LM85_REG_CONFIG);
-        /* Try to clear LOCK, Set START, save everything else */
-        value = (value & ~ 0x02) | 0x01 ;
-        dev_dbg(&client->dev, "Setting CONFIG to: 0x%02x\n", value);
-        lm85_write_value(client, LM85_REG_CONFIG, value);
 }
 
 static struct lm85_data *lm85_update_device(struct device *dev)
@@ -1427,28 +1355,30 @@ static struct lm85_data *lm85_update_device(struct device *dev)
 
         mutex_lock(&data->update_lock);
 
-        if ( !data->valid ||
-             time_after(jiffies, data->last_reading + LM85_DATA_INTERVAL) ) {
+        if (!data->valid ||
+             time_after(jiffies, data->last_reading + LM85_DATA_INTERVAL)) {
                 /* Things that change quickly */
                 dev_dbg(&client->dev, "Reading sensor values\n");
-                
+
                 /* Have to read extended bits first to "freeze" the
                  * more significant bits that are read later.
                  * There are 2 additional resolution bits per channel and we
                  * have room for 4, so we shift them to the left.
                  */
-                if ( (data->type == adm1027) || (data->type == adt7463) ) {
+                if (data->type == adm1027 || data->type == adt7463) {
                         int ext1 = lm85_read_value(client,
                                                    ADM1027_REG_EXTEND_ADC1);
                         int ext2 =  lm85_read_value(client,
                                                     ADM1027_REG_EXTEND_ADC2);
                         int val = (ext1 << 8) + ext2;
 
-                        for(i = 0; i <= 4; i++)
-                                data->in_ext[i] = ((val>>(i * 2))&0x03) << 2;
+                        for (i = 0; i <= 4; i++)
+                                data->in_ext[i] =
+                                        ((val >> (i * 2)) & 0x03) << 2;
 
-                        for(i = 0; i <= 2; i++)
-                                data->temp_ext[i] = (val>>((i + 4) * 2))&0x0c;
+                        for (i = 0; i <= 2; i++)
+                                data->temp_ext[i] =
+                                        (val >> ((i + 4) * 2)) & 0x0c;
                 }
 
                 data->vid = lm85_read_value(client, LM85_REG_VID);
@@ -1456,6 +1386,8 @@ static struct lm85_data *lm85_update_device(struct device *dev)
                 for (i = 0; i <= 3; ++i) {
                         data->in[i] =
                             lm85_read_value(client, LM85_REG_IN(i));
+                        data->fan[i] =
+                            lm85_read_value(client, LM85_REG_FAN(i));
                 }
 
                 if (!(data->type == adt7463 && (data->vid & 0x80))) {
@@ -1463,38 +1395,25 @@ static struct lm85_data *lm85_update_device(struct device *dev)
                                       LM85_REG_IN(4));
                 }
 
-                for (i = 0; i <= 3; ++i) {
-                        data->fan[i] =
-                            lm85_read_value(client, LM85_REG_FAN(i));
-                }
-
                 for (i = 0; i <= 2; ++i) {
                         data->temp[i] =
                             lm85_read_value(client, LM85_REG_TEMP(i));
-                }
-
-                for (i = 0; i <= 2; ++i) {
                         data->pwm[i] =
                             lm85_read_value(client, LM85_REG_PWM(i));
                 }
 
                 data->alarms = lm85_read_value(client, LM85_REG_ALARM1);
 
-                if ( data->type == adt7463 ) {
-                        if( data->therm_total < ULONG_MAX - 256 ) {
-                            data->therm_total +=
-                                lm85_read_value(client, ADT7463_REG_THERM );
-                        }
-                } else if ( data->type == emc6d100 ) {
+                if (data->type == emc6d100) {
                         /* Three more voltage sensors */
                         for (i = 5; i <= 7; ++i) {
-                                data->in[i] =
-                                        lm85_read_value(client, EMC6D100_REG_IN(i));
+                                data->in[i] = lm85_read_value(client,
+                                                        EMC6D100_REG_IN(i));
                         }
                         /* More alarm bits */
-                        data->alarms |=
-                                lm85_read_value(client, EMC6D100_REG_ALARM3) << 16;
-                } else if (data->type == emc6d102 ) {
+                        data->alarms |= lm85_read_value(client,
+                                                EMC6D100_REG_ALARM3) << 16;
+                } else if (data->type == emc6d102) {
                         /* Have to read LSB bits after the MSB ones because
                            the reading of the MSB bits has frozen the
                            LSBs (backward from the ADM1027).
@@ -1509,20 +1428,20 @@ static struct lm85_data *lm85_update_device(struct device *dev)
                                                    EMC6D102_REG_EXTEND_ADC4);
                         data->in_ext[0] = ext3 & 0x0f;
                         data->in_ext[1] = ext4 & 0x0f;
-                        data->in_ext[2] = (ext4 >> 4) & 0x0f;
-                        data->in_ext[3] = (ext3 >> 4) & 0x0f;
-                        data->in_ext[4] = (ext2 >> 4) & 0x0f;
+                        data->in_ext[2] = ext4 >> 4;
+                        data->in_ext[3] = ext3 >> 4;
+                        data->in_ext[4] = ext2 >> 4;
 
                         data->temp_ext[0] = ext1 & 0x0f;
                         data->temp_ext[1] = ext2 & 0x0f;
-                        data->temp_ext[2] = (ext1 >> 4) & 0x0f;
+                        data->temp_ext[2] = ext1 >> 4;
                 }
 
-                data->last_reading = jiffies ;
-        };  /* last_reading */
+                data->last_reading = jiffies;
+        }  /* last_reading */
 
-        if ( !data->valid ||
-             time_after(jiffies, data->last_config + LM85_CONFIG_INTERVAL) ) {
+        if (!data->valid ||
+             time_after(jiffies, data->last_config + LM85_CONFIG_INTERVAL)) {
                 /* Things that don't change often */
                 dev_dbg(&client->dev, "Reading config values\n");
 
@@ -1531,6 +1450,8 @@ static struct lm85_data *lm85_update_device(struct device *dev)
                             lm85_read_value(client, LM85_REG_IN_MIN(i));
                         data->in_max[i] =
                             lm85_read_value(client, LM85_REG_IN_MAX(i));
+                        data->fan_min[i] =
+                            lm85_read_value(client, LM85_REG_FAN_MIN(i));
                 }
 
                 if (!(data->type == adt7463 && (data->vid & 0x80))) {
@@ -1540,34 +1461,28 @@ static struct lm85_data *lm85_update_device(struct device *dev)
                                           LM85_REG_IN_MAX(4));
                 }
 
-                if ( data->type == emc6d100 ) {
+                if (data->type == emc6d100) {
                         for (i = 5; i <= 7; ++i) {
-                                data->in_min[i] =
-                                        lm85_read_value(client, EMC6D100_REG_IN_MIN(i));
-                                data->in_max[i] =
-                                        lm85_read_value(client, EMC6D100_REG_IN_MAX(i));
+                                data->in_min[i] = lm85_read_value(client,
+                                                EMC6D100_REG_IN_MIN(i));
+                                data->in_max[i] = lm85_read_value(client,
+                                                EMC6D100_REG_IN_MAX(i));
                         }
                 }
 
-                for (i = 0; i <= 3; ++i) {
-                        data->fan_min[i] =
-                            lm85_read_value(client, LM85_REG_FAN_MIN(i));
-                }
-
                 for (i = 0; i <= 2; ++i) {
+                        int val;
+
                         data->temp_min[i] =
                             lm85_read_value(client, LM85_REG_TEMP_MIN(i));
                         data->temp_max[i] =
                             lm85_read_value(client, LM85_REG_TEMP_MAX(i));
-                }
 
-                for (i = 0; i <= 2; ++i) {
-                        int val ;
                         data->autofan[i].config =
                             lm85_read_value(client, LM85_REG_AFAN_CONFIG(i));
                         val = lm85_read_value(client, LM85_REG_AFAN_RANGE(i));
-                        data->autofan[i].freq = val & 0x07 ;
-                        data->zone[i].range = (val >> 4) & 0x0f ;
+                        data->autofan[i].freq = val & 0x07;
+                        data->zone[i].range = val >> 4;
                         data->autofan[i].min_pwm =
                             lm85_read_value(client, LM85_REG_AFAN_MINPWM(i));
                         data->zone[i].limit =
@@ -1577,50 +1492,19 @@ static struct lm85_data *lm85_update_device(struct device *dev)
                 }
 
                 i = lm85_read_value(client, LM85_REG_AFAN_SPIKE1);
-                data->smooth[0] = i & 0x0f ;
-                data->syncpwm3 = i & 0x10 ;  /* Save PWM3 config */
-                data->autofan[0].min_off = (i & 0x20) != 0 ;
-                data->autofan[1].min_off = (i & 0x40) != 0 ;
-                data->autofan[2].min_off = (i & 0x80) != 0 ;
-                i = lm85_read_value(client, LM85_REG_AFAN_SPIKE2);
-                data->smooth[1] = (i>>4) & 0x0f ;
-                data->smooth[2] = i & 0x0f ;
+                data->autofan[0].min_off = (i & 0x20) != 0;
+                data->autofan[1].min_off = (i & 0x40) != 0;
+                data->autofan[2].min_off = (i & 0x80) != 0;
 
                 i = lm85_read_value(client, LM85_REG_AFAN_HYST1);
-                data->zone[0].hyst = (i>>4) & 0x0f ;
-                data->zone[1].hyst = i & 0x0f ;
+                data->zone[0].hyst = i >> 4;
+                data->zone[1].hyst = i & 0x0f;
 
                 i = lm85_read_value(client, LM85_REG_AFAN_HYST2);
-                data->zone[2].hyst = (i>>4) & 0x0f ;
-
-                if ( (data->type == lm85b) || (data->type == lm85c) ) {
-                        data->tach_mode = lm85_read_value(client,
-                                LM85_REG_TACH_MODE );
-                        data->spinup_ctl = lm85_read_value(client,
-                                LM85_REG_SPINUP_CTL );
-                } else if ( (data->type == adt7463) || (data->type == adm1027) ) {
-                        if ( data->type == adt7463 ) {
-                                for (i = 0; i <= 2; ++i) {
-                                    data->oppoint[i] = lm85_read_value(client,
-                                        ADT7463_REG_OPPOINT(i) );
-                                }
-                                data->tmin_ctl = lm85_read_value(client,
-                                        ADT7463_REG_TMIN_CTL1 );
-                                data->therm_limit = lm85_read_value(client,
-                                        ADT7463_REG_THERM_LIMIT );
-                        }
-                        for (i = 0; i <= 2; ++i) {
-                            data->temp_offset[i] = lm85_read_value(client,
-                                ADM1027_REG_TEMP_OFFSET(i) );
-                        }
-                        data->tach_mode = lm85_read_value(client,
-                                ADM1027_REG_CONFIG3 );
-                        data->fan_ppr = lm85_read_value(client,
-                                ADM1027_REG_FAN_PPR );
-                }
-        
+                data->zone[2].hyst = i >> 4;
+
                 data->last_config = jiffies;
-        };  /* last_config */
+        }  /* last_config */
 
         data->valid = 1;
 
@@ -1635,17 +1519,15 @@ static int __init sm_lm85_init(void)
         return i2c_add_driver(&lm85_driver);
 }
 
-static void  __exit sm_lm85_exit(void)
+static void __exit sm_lm85_exit(void)
 {
         i2c_del_driver(&lm85_driver);
 }
 
-/* Thanks to Richard Barrington for adding the LM85 to sensors-detect.
- * Thanks to Margit Schubert-While <margitsw@t-online.de> for help with
- *     post 2.7.0 CVS changes.
- */
 MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Philip Pokorny <ppokorny@penguincomputing.com>, Margit Schubert-While <margitsw@t-online.de>, Justin Thiessen <jthiessen@penguincomputing.com");
+MODULE_AUTHOR("Philip Pokorny <ppokorny@penguincomputing.com>, "
+        "Margit Schubert-While <margitsw@t-online.de>, "
+        "Justin Thiessen <jthiessen@penguincomputing.com>");
 MODULE_DESCRIPTION("LM85-B, LM85-C driver");
 
 module_init(sm_lm85_init);
diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c
index 48d084bdf7c8..3c855ff2992f 100644
--- a/drivers/i2c/busses/i2c-bfin-twi.c
+++ b/drivers/i2c/busses/i2c-bfin-twi.c
@@ -49,6 +49,8 @@ struct bfin_twi_iface {
         struct i2c_msg          *pmsg;
         int                     msg_num;
         int                     cur_msg;
+        u16                     saved_clkdiv;
+        u16                     saved_control;
         void __iomem            *regs_base;
 };
 
@@ -565,32 +567,43 @@ static u32 bfin_twi_functionality(struct i2c_adapter *adap)
                I2C_FUNC_I2C;
 }
 
-
 static struct i2c_algorithm bfin_twi_algorithm = {
         .master_xfer   = bfin_twi_master_xfer,
         .smbus_xfer    = bfin_twi_smbus_xfer,
         .functionality = bfin_twi_functionality,
 };
 
-
-static int i2c_bfin_twi_suspend(struct platform_device *dev, pm_message_t state)
+static int i2c_bfin_twi_suspend(struct platform_device *pdev, pm_message_t state)
 {
-        struct bfin_twi_iface *iface = platform_get_drvdata(dev);
+        struct bfin_twi_iface *iface = platform_get_drvdata(pdev);
+
+        iface->saved_clkdiv = read_CLKDIV(iface);
+        iface->saved_control = read_CONTROL(iface);
+
+        free_irq(iface->irq, iface);
 
         /* Disable TWI */
-        write_CONTROL(iface, read_CONTROL(iface) & ~TWI_ENA);
-        SSYNC();
+        write_CONTROL(iface, iface->saved_control & ~TWI_ENA);
 
         return 0;
 }
 
-static int i2c_bfin_twi_resume(struct platform_device *dev)
+static int i2c_bfin_twi_resume(struct platform_device *pdev)
 {
-        struct bfin_twi_iface *iface = platform_get_drvdata(dev);
+        struct bfin_twi_iface *iface = platform_get_drvdata(pdev);
 
-        /* Enable TWI */
-        write_CONTROL(iface, read_CONTROL(iface) | TWI_ENA);
-        SSYNC();
+        int rc = request_irq(iface->irq, bfin_twi_interrupt_entry,
+                IRQF_DISABLED, pdev->name, iface);
+        if (rc) {
+                dev_err(&pdev->dev, "Can't get IRQ %d !\n", iface->irq);
+                return -ENODEV;
+        }
+
+        /* Resume TWI interface clock as specified */
+        write_CLKDIV(iface, iface->saved_clkdiv);
+
+        /* Resume TWI */
+        write_CONTROL(iface, iface->saved_control);
 
         return 0;
 }
diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c
index 79b455a1f090..32104eac8d3d 100644
--- a/drivers/i2c/busses/i2c-gpio.c
+++ b/drivers/i2c/busses/i2c-gpio.c
@@ -77,7 +77,7 @@ static int i2c_gpio_getscl(void *data)
         return gpio_get_value(pdata->scl_pin);
 }
 
-static int __init i2c_gpio_probe(struct platform_device *pdev)
+static int __devinit i2c_gpio_probe(struct platform_device *pdev)
 {
         struct i2c_gpio_platform_data *pdata;
         struct i2c_algo_bit_data *bit_data;
@@ -174,7 +174,7 @@ err_alloc_adap:
         return ret;
 }
 
-static int __exit i2c_gpio_remove(struct platform_device *pdev)
+static int __devexit i2c_gpio_remove(struct platform_device *pdev)
 {
         struct i2c_gpio_platform_data *pdata;
         struct i2c_adapter *adap;
@@ -196,14 +196,15 @@ static struct platform_driver i2c_gpio_driver = {
                 .name   = "i2c-gpio",
                 .owner  = THIS_MODULE,
         },
-        .remove         = __exit_p(i2c_gpio_remove),
+        .probe          = i2c_gpio_probe,
+        .remove         = __devexit_p(i2c_gpio_remove),
 };
 
 static int __init i2c_gpio_init(void)
 {
         int ret;
 
-        ret = platform_driver_probe(&i2c_gpio_driver, i2c_gpio_probe);
+        ret = platform_driver_register(&i2c_gpio_driver);
         if (ret)
                 printk(KERN_ERR "i2c-gpio: probe failed: %d\n", ret);
 
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 007390ad9810..4864723c7425 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -33,6 +33,7 @@
 #include <linux/err.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
+#include <linux/cpufreq.h>
 
 #include <asm/hardware.h>
 #include <asm/irq.h>
@@ -64,6 +65,7 @@ struct s3c24xx_i2c {
         unsigned int            tx_setup;
 
         enum s3c24xx_i2c_state  state;
+        unsigned long           clkrate;
 
         void __iomem            *regs;
         struct clk              *clk;
@@ -71,6 +73,10 @@ struct s3c24xx_i2c {
         struct resource         *irq;
         struct resource         *ioarea;
         struct i2c_adapter      adap;
+
+#ifdef CONFIG_CPU_FREQ
+        struct notifier_block   freq_transition;
+#endif
 };
 
 /* default platform data to use if not supplied in the platform_device
@@ -501,6 +507,9 @@ static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c, struct i2c_msg *msgs, int
         unsigned long timeout;
         int ret;
 
+        if (!readl(i2c->regs + S3C2410_IICCON) & S3C2410_IICCON_IRQEN)
+                return -EIO;
+
         ret = s3c24xx_i2c_set_master(i2c);
         if (ret != 0) {
                 dev_err(i2c->dev, "cannot get bus (error %d)\n", ret);
@@ -636,27 +645,28 @@ static inline int freq_acceptable(unsigned int freq, unsigned int wanted)
         return (diff >= -2 && diff <= 2);
 }
 
-/* s3c24xx_i2c_getdivisor
+/* s3c24xx_i2c_clockrate
  *
  * work out a divisor for the user requested frequency setting,
  * either by the requested frequency, or scanning the acceptable
  * range of frequencies until something is found
 */
 
-static int s3c24xx_i2c_getdivisor(struct s3c24xx_i2c *i2c,
-                                  struct s3c2410_platform_i2c *pdata,
-                                  unsigned long *iicon,
-                                  unsigned int *got)
+static int s3c24xx_i2c_clockrate(struct s3c24xx_i2c *i2c, unsigned int *got)
 {
+        struct s3c2410_platform_i2c *pdata;
         unsigned long clkin = clk_get_rate(i2c->clk);
-        
         unsigned int divs, div1;
+        u32 iiccon;
         int freq;
         int start, end;
 
+        i2c->clkrate = clkin;
+
+        pdata = s3c24xx_i2c_get_platformdata(i2c->adap.dev.parent);
         clkin /= 1000;          /* clkin now in KHz */
      
-        dev_dbg(i2c->dev,  "pdata %p, freq %lu %lu..%lu\n",
+        dev_dbg(i2c->dev, "pdata %p, freq %lu %lu..%lu\n",
                  pdata, pdata->bus_freq, pdata->min_freq, pdata->max_freq);
 
         if (pdata->bus_freq != 0) {
@@ -688,11 +698,79 @@ static int s3c24xx_i2c_getdivisor(struct s3c24xx_i2c *i2c,
 
  found:
         *got = freq;
-        *iicon |= (divs-1);
-        *iicon |= (div1 == 512) ? S3C2410_IICCON_TXDIV_512 : 0;
+
+        iiccon = readl(i2c->regs + S3C2410_IICCON);
+        iiccon &= ~(S3C2410_IICCON_SCALEMASK | S3C2410_IICCON_TXDIV_512);
+        iiccon |= (divs-1);
+
+        if (div1 == 512)
+                iiccon |= S3C2410_IICCON_TXDIV_512;
+
+        writel(iiccon, i2c->regs + S3C2410_IICCON);
+
+        return 0;
+}
+
+#ifdef CONFIG_CPU_FREQ
+
+#define freq_to_i2c(_n) container_of(_n, struct s3c24xx_i2c, freq_transition)
+
+static int s3c24xx_i2c_cpufreq_transition(struct notifier_block *nb,
+                                          unsigned long val, void *data)
+{
+        struct s3c24xx_i2c *i2c = freq_to_i2c(nb);
+        unsigned long flags;
+        unsigned int got;
+        int delta_f;
+        int ret;
+
+        delta_f = clk_get_rate(i2c->clk) - i2c->clkrate;
+
+        /* if we're post-change and the input clock has slowed down
+         * or at pre-change and the clock is about to speed up, then
+         * adjust our clock rate. <0 is slow, >0 speedup.
+         */
+
+        if ((val == CPUFREQ_POSTCHANGE && delta_f < 0) ||
+            (val == CPUFREQ_PRECHANGE && delta_f > 0)) {
+                spin_lock_irqsave(&i2c->lock, flags);
+                ret = s3c24xx_i2c_clockrate(i2c, &got);
+                spin_unlock_irqrestore(&i2c->lock, flags);
+
+                if (ret < 0)
+                        dev_err(i2c->dev, "cannot find frequency\n");
+                else
+                        dev_info(i2c->dev, "setting freq %d\n", got);
+        }
+
+        return 0;
+}
+
+static inline int s3c24xx_i2c_register_cpufreq(struct s3c24xx_i2c *i2c)
+{
+        i2c->freq_transition.notifier_call = s3c24xx_i2c_cpufreq_transition;
+
+        return cpufreq_register_notifier(&i2c->freq_transition,
+                                         CPUFREQ_TRANSITION_NOTIFIER);
+}
+
+static inline void s3c24xx_i2c_deregister_cpufreq(struct s3c24xx_i2c *i2c)
+{
+        cpufreq_unregister_notifier(&i2c->freq_transition,
+                                    CPUFREQ_TRANSITION_NOTIFIER);
+}
+
+#else
+static inline int s3c24xx_i2c_register_cpufreq(struct s3c24xx_i2c *i2c)
+{
         return 0;
 }
 
+static inline void s3c24xx_i2c_deregister_cpufreq(struct s3c24xx_i2c *i2c)
+{
+}
+#endif
+
 /* s3c24xx_i2c_init
  *
  * initialise the controller, set the IO lines and frequency 
@@ -719,9 +797,12 @@ static int s3c24xx_i2c_init(struct s3c24xx_i2c *i2c)
 
         dev_info(i2c->dev, "slave address 0x%02x\n", pdata->slave_addr);
 
+        writel(iicon, i2c->regs + S3C2410_IICCON);
+
         /* we need to work out the divisors for the clock... */
 
-        if (s3c24xx_i2c_getdivisor(i2c, pdata, &iicon, &freq) != 0) {
+        if (s3c24xx_i2c_clockrate(i2c, &freq) != 0) {
+                writel(0, i2c->regs + S3C2410_IICCON);
                 dev_err(i2c->dev, "cannot meet bus frequency required\n");
                 return -EINVAL;
         }
@@ -730,8 +811,6 @@ static int s3c24xx_i2c_init(struct s3c24xx_i2c *i2c)
 
         dev_info(i2c->dev, "bus frequency set to %d KHz\n", freq);
         dev_dbg(i2c->dev, "S3C2410_IICCON=0x%02lx\n", iicon);
-        
-        writel(iicon, i2c->regs + S3C2410_IICCON);
 
         /* check for s3c2440 i2c controller  */
 
@@ -752,9 +831,12 @@ static int s3c24xx_i2c_init(struct s3c24xx_i2c *i2c)
 static int s3c24xx_i2c_probe(struct platform_device *pdev)
 {
         struct s3c24xx_i2c *i2c = &s3c24xx_i2c;
+        struct s3c2410_platform_i2c *pdata;
         struct resource *res;
         int ret;
 
+        pdata = s3c24xx_i2c_get_platformdata(&pdev->dev);
+
         /* find the clock and enable it */
 
         i2c->dev = &pdev->dev;
@@ -832,17 +914,34 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
         dev_dbg(&pdev->dev, "irq resource %p (%lu)\n", res,
                 (unsigned long)res->start);
 
-        ret = i2c_add_adapter(&i2c->adap);
+        ret = s3c24xx_i2c_register_cpufreq(i2c);
         if (ret < 0) {
-                dev_err(&pdev->dev, "failed to add bus to i2c core\n");
+                dev_err(&pdev->dev, "failed to register cpufreq notifier\n");
                 goto err_irq;
         }
 
+        /* Note, previous versions of the driver used i2c_add_adapter()
+         * to add the bus at any number. We now pass the bus number via
+         * the platform data, so if unset it will now default to always
+         * being bus 0.
+         */
+
+        i2c->adap.nr = pdata->bus_num;
+
+        ret = i2c_add_numbered_adapter(&i2c->adap);
+        if (ret < 0) {
+                dev_err(&pdev->dev, "failed to add bus to i2c core\n");
+                goto err_cpufreq;
+        }
+
         platform_set_drvdata(pdev, i2c);
 
         dev_info(&pdev->dev, "%s: S3C I2C adapter\n", i2c->adap.dev.bus_id);
         return 0;
 
+ err_cpufreq:
+        s3c24xx_i2c_deregister_cpufreq(i2c);
+
  err_irq:
         free_irq(i2c->irq->start, i2c);
 
@@ -870,6 +969,8 @@ static int s3c24xx_i2c_remove(struct platform_device *pdev)
 {
         struct s3c24xx_i2c *i2c = platform_get_drvdata(pdev);
 
+        s3c24xx_i2c_deregister_cpufreq(i2c);
+
         i2c_del_adapter(&i2c->adap);
         free_irq(i2c->irq->start, i2c);
 
diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c
index c521bf6e1bf2..fa2be26272d5 100644
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -1086,6 +1086,11 @@ static int __devinit pmac_ide_setup_device(pmac_ide_hwif_t *pmif, hw_regs_t *hw)
         /* Make sure we have sane timings */
         sanitize_timings(pmif);
 
+        host = ide_host_alloc(&d, hws);
+        if (host == NULL)
+                return -ENOMEM;
+        hwif = host->ports[0];
+
 #ifndef CONFIG_PPC64
         /* XXX FIXME: Media bay stuff need re-organizing */
         if (np->parent && np->parent->name
@@ -1119,11 +1124,11 @@ static int __devinit pmac_ide_setup_device(pmac_ide_hwif_t *pmif, hw_regs_t *hw)
                          pmif->mdev ? "macio" : "PCI", pmif->aapl_bus_id,
                          pmif->mediabay ? " (mediabay)" : "", hw->irq);
 
-        rc = ide_host_add(&d, hws, &host);
-        if (rc)
+        rc = ide_host_register(host, &d, hws);
+        if (rc) {
+                ide_host_free(host);
                 return rc;
-
-        hwif = host->ports[0];
+        }
 
         return 0;
 }
diff --git a/drivers/input/keyboard/maple_keyb.c b/drivers/input/keyboard/maple_keyb.c
index 2b404284c28a..7797ef6e5e64 100644
--- a/drivers/input/keyboard/maple_keyb.c
+++ b/drivers/input/keyboard/maple_keyb.c
@@ -27,7 +27,6 @@
 #include <linux/init.h>
 #include <linux/timer.h>
 #include <linux/maple.h>
-#include <asm/mach/maple.h>
 
 /* Very simple mutex to ensure proper cleanup */
 static DEFINE_MUTEX(maple_keyb_mutex);
diff --git a/drivers/input/keyboard/sh_keysc.c b/drivers/input/keyboard/sh_keysc.c
index 8486abc457ed..c600ab7f93e8 100644
--- a/drivers/input/keyboard/sh_keysc.c
+++ b/drivers/input/keyboard/sh_keysc.c
@@ -158,25 +158,18 @@ static int __devinit sh_keysc_probe(struct platform_device *pdev)
         memcpy(&priv->pdata, pdev->dev.platform_data, sizeof(priv->pdata));
         pdata = &priv->pdata;
 
-        res = request_mem_region(res->start, res_size(res), pdev->name);
-        if (res == NULL) {
-                dev_err(&pdev->dev, "failed to request I/O memory\n");
-                error = -EBUSY;
-                goto err1;
-        }
-
         priv->iomem_base = ioremap_nocache(res->start, res_size(res));
         if (priv->iomem_base == NULL) {
                 dev_err(&pdev->dev, "failed to remap I/O memory\n");
                 error = -ENXIO;
-                goto err2;
+                goto err1;
         }
 
         priv->input = input_allocate_device();
         if (!priv->input) {
                 dev_err(&pdev->dev, "failed to allocate input device\n");
                 error = -ENOMEM;
-                goto err3;
+                goto err2;
         }
 
         input = priv->input;
@@ -194,7 +187,7 @@ static int __devinit sh_keysc_probe(struct platform_device *pdev)
         error = request_irq(irq, sh_keysc_isr, 0, pdev->name, pdev);
         if (error) {
                 dev_err(&pdev->dev, "failed to request IRQ\n");
-                goto err4;
+                goto err3;
         }
 
         for (i = 0; i < SH_KEYSC_MAXKEYS; i++) {
@@ -206,7 +199,7 @@ static int __devinit sh_keysc_probe(struct platform_device *pdev)
         error = input_register_device(input);
         if (error) {
                 dev_err(&pdev->dev, "failed to register input device\n");
-                goto err5;
+                goto err4;
         }
 
         iowrite16((sh_keysc_mode[pdata->mode].kymd << 8) |
@@ -214,14 +207,12 @@ static int __devinit sh_keysc_probe(struct platform_device *pdev)
         iowrite16(0, priv->iomem_base + KYOUTDR_OFFS);
         iowrite16(KYCR2_IRQ_LEVEL, priv->iomem_base + KYCR2_OFFS);
         return 0;
- err5:
-        free_irq(irq, pdev);
  err4:
-        input_free_device(input);
+        free_irq(irq, pdev);
  err3:
-        iounmap(priv->iomem_base);
+        input_free_device(input);
  err2:
-        release_mem_region(res->start, res_size(res));
+        iounmap(priv->iomem_base);
  err1:
         platform_set_drvdata(pdev, NULL);
         kfree(priv);
@@ -232,7 +223,6 @@ static int __devinit sh_keysc_probe(struct platform_device *pdev)
 static int __devexit sh_keysc_remove(struct platform_device *pdev)
 {
         struct sh_keysc_priv *priv = platform_get_drvdata(pdev);
-        struct resource *res;
 
         iowrite16(KYCR2_IRQ_DISABLED, priv->iomem_base + KYCR2_OFFS);
 
@@ -240,9 +230,6 @@ static int __devexit sh_keysc_remove(struct platform_device *pdev)
         free_irq(platform_get_irq(pdev, 0), pdev);
         iounmap(priv->iomem_base);
 
-        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-        release_mem_region(res->start, res_size(res));
-
         platform_set_drvdata(pdev, NULL);
         kfree(priv);
         return 0;
diff --git a/drivers/input/misc/uinput.c b/drivers/input/misc/uinput.c
index 2bcfa0b35061..223d56d5555b 100644
--- a/drivers/input/misc/uinput.c
+++ b/drivers/input/misc/uinput.c
@@ -37,7 +37,6 @@
 #include <linux/fs.h>
 #include <linux/miscdevice.h>
 #include <linux/uinput.h>
-#include <linux/smp_lock.h>
 
 static int uinput_dev_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
 {
diff --git a/drivers/input/serio/serio.c b/drivers/input/serio/serio.c
index 78f2abb5c11b..2f12d60eee3b 100644
--- a/drivers/input/serio/serio.c
+++ b/drivers/input/serio/serio.c
@@ -63,8 +63,9 @@ static LIST_HEAD(serio_list);
 static struct bus_type serio_bus;
 
 static void serio_add_port(struct serio *serio);
-static void serio_reconnect_port(struct serio *serio);
+static int serio_reconnect_port(struct serio *serio);
 static void serio_disconnect_port(struct serio *serio);
+static void serio_reconnect_chain(struct serio *serio);
 static void serio_attach_driver(struct serio_driver *drv);
 
 static int serio_connect_driver(struct serio *serio, struct serio_driver *drv)
@@ -161,6 +162,7 @@ static void serio_find_driver(struct serio *serio)
 enum serio_event_type {
         SERIO_RESCAN_PORT,
         SERIO_RECONNECT_PORT,
+        SERIO_RECONNECT_CHAIN,
         SERIO_REGISTER_PORT,
         SERIO_ATTACH_DRIVER,
 };
@@ -315,6 +317,10 @@ static void serio_handle_event(void)
                                 serio_find_driver(event->object);
                                 break;
 
+                        case SERIO_RECONNECT_CHAIN:
+                                serio_reconnect_chain(event->object);
+                                break;
+
                         case SERIO_ATTACH_DRIVER:
                                 serio_attach_driver(event->object);
                                 break;
@@ -470,7 +476,7 @@ static ssize_t serio_rebind_driver(struct device *dev, struct device_attribute *
         if (!strncmp(buf, "none", count)) {
                 serio_disconnect_port(serio);
         } else if (!strncmp(buf, "reconnect", count)) {
-                serio_reconnect_port(serio);
+                serio_reconnect_chain(serio);
         } else if (!strncmp(buf, "rescan", count)) {
                 serio_disconnect_port(serio);
                 serio_find_driver(serio);
@@ -620,14 +626,30 @@ static void serio_destroy_port(struct serio *serio)
 }
 
 /*
+ * Reconnect serio port (re-initialize attached device).
+ * If reconnect fails (old device is no longer attached or
+ * there was no device to begin with) we do full rescan in
+ * hope of finding a driver for the port.
+ */
+static int serio_reconnect_port(struct serio *serio)
+{
+        int error = serio_reconnect_driver(serio);
+
+        if (error) {
+                serio_disconnect_port(serio);
+                serio_find_driver(serio);
+        }
+
+        return error;
+}
+
+/*
  * Reconnect serio port and all its children (re-initialize attached devices)
  */
-static void serio_reconnect_port(struct serio *serio)
+static void serio_reconnect_chain(struct serio *serio)
 {
         do {
-                if (serio_reconnect_driver(serio)) {
-                        serio_disconnect_port(serio);
-                        serio_find_driver(serio);
+                if (serio_reconnect_port(serio)) {
                         /* Ok, old children are now gone, we are done */
                         break;
                 }
@@ -673,7 +695,7 @@ void serio_rescan(struct serio *serio)
 
 void serio_reconnect(struct serio *serio)
 {
-        serio_queue_event(serio, NULL, SERIO_RECONNECT_PORT);
+        serio_queue_event(serio, NULL, SERIO_RECONNECT_CHAIN);
 }
 
 /*
@@ -927,19 +949,16 @@ static int serio_suspend(struct device *dev, pm_message_t state)
 
 static int serio_resume(struct device *dev)
 {
-        struct serio *serio = to_serio_port(dev);
-
-        if (dev->power.power_state.event != PM_EVENT_ON &&
-            serio_reconnect_driver(serio)) {
-                /*
-                 * Driver re-probing can take a while, so better let kseriod
-                 * deal with it.
-                 */
-                serio_rescan(serio);
+        /*
+         * Driver reconnect can take a while, so better let kseriod
+         * deal with it.
+         */
+        if (dev->power.power_state.event != PM_EVENT_ON) {
+                dev->power.power_state = PMSG_ON;
+                serio_queue_event(to_serio_port(dev), NULL,
+                                  SERIO_RECONNECT_PORT);
         }
 
-        dev->power.power_state = PMSG_ON;
-
         return 0;
 }
 #endif /* CONFIG_PM */
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index e57366521572..6e60a97a234c 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -205,6 +205,18 @@ config TOUCHSCREEN_TOUCHWIN
           To compile this driver as a module, choose M here: the
           module will be called touchwin.
 
+config TOUCHSCREEN_ATMEL_TSADCC
+        tristate "Atmel Touchscreen Interface"
+        depends on ARCH_AT91SAM9RL
+        help
+          Say Y here if you have a 4-wire touchscreen connected to the
+          ADC Controller on your Atmel SoC (such as the AT91SAM9RL).
+
+          If unsure, say N.
+
+          To compile this driver as a module, choose M here: the
+          module will be called atmel_tsadcc.
+
 config TOUCHSCREEN_UCB1400
         tristate "Philips UCB1400 touchscreen"
         select AC97_BUS
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 39a804cd80f1..15cf29079489 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -7,6 +7,7 @@
 wm97xx-ts-y := wm97xx-core.o
 
 obj-$(CONFIG_TOUCHSCREEN_ADS7846)       += ads7846.o
+obj-$(CONFIG_TOUCHSCREEN_ATMEL_TSADCC)  += atmel_tsadcc.o
 obj-$(CONFIG_TOUCHSCREEN_BITSY)         += h3600_ts_input.o
 obj-$(CONFIG_TOUCHSCREEN_CORGI)         += corgi_ts.o
 obj-$(CONFIG_TOUCHSCREEN_GUNZE)         += gunze.o
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index 907a45fe9d40..ce6f48c695f5 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -517,7 +517,9 @@ static void ads7846_rx(void *ads)
         if (x == MAX_12BIT)
                 x = 0;
 
-        if (likely(x && z1)) {
+        if (ts->model == 7843) {
+                Rt = ts->pressure_max / 2;
+        } else if (likely(x && z1)) {
                 /* compute touch pressure resistance using equation #2 */
                 Rt = z2;
                 Rt -= z1;
@@ -525,11 +527,9 @@ static void ads7846_rx(void *ads)
                 Rt *= ts->x_plate_ohms;
                 Rt /= z1;
                 Rt = (Rt + 2047) >> 12;
-        } else
+        } else {
                 Rt = 0;
-
-        if (ts->model == 7843)
-                Rt = ts->pressure_max / 2;
+        }
 
         /* Sample found inconsistent by debouncing or pressure is beyond
          * the maximum. Don't report it to user space, repeat at least
@@ -633,19 +633,17 @@ static void ads7846_rx_val(void *ads)
         struct ads7846 *ts = ads;
         struct spi_message *m;
         struct spi_transfer *t;
-        u16 *rx_val;
         int val;
         int action;
         int status;
 
         m = &ts->msg[ts->msg_idx];
         t = list_entry(m->transfers.prev, struct spi_transfer, transfer_list);
-        rx_val = t->rx_buf;
 
         /* adjust:  on-wire is a must-ignore bit, a BE12 value, then padding;
          * built from two 8 bit values written msb-first.
          */
-        val = be16_to_cpu(*rx_val) >> 3;
+        val = be16_to_cpup((__be16 *)t->rx_buf) >> 3;
 
         action = ts->filter(ts->filter_data, ts->msg_idx, &val);
         switch (action) {
@@ -659,7 +657,7 @@ static void ads7846_rx_val(void *ads)
                 m = ts->last_msg;
                 break;
         case ADS7846_FILTER_OK:
-                *rx_val = val;
+                *(u16 *)t->rx_buf = val;
                 ts->tc.ignore = 0;
                 m = &ts->msg[++ts->msg_idx];
                 break;
diff --git a/drivers/input/touchscreen/atmel_tsadcc.c b/drivers/input/touchscreen/atmel_tsadcc.c
new file mode 100644
index 000000000000..eee126b19e8b
--- /dev/null
+++ b/drivers/input/touchscreen/atmel_tsadcc.c
@@ -0,0 +1,332 @@
+/*
+ *  Atmel Touch Screen Driver
+ *
+ *  Copyright (c) 2008 ATMEL
+ *  Copyright (c) 2008 Dan Liang
+ *  Copyright (c) 2008 TimeSys Corporation
+ *  Copyright (c) 2008 Justin Waters
+ *
+ *  Based on touchscreen code from Atmel Corporation.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/input.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+/* Register definitions based on AT91SAM9RL64 preliminary draft datasheet */
+
+#define ATMEL_TSADCC_CR         0x00    /* Control register */
+#define   ATMEL_TSADCC_SWRST    (1 << 0)        /* Software Reset*/
+#define   ATMEL_TSADCC_START    (1 << 1)        /* Start conversion */
+
+#define ATMEL_TSADCC_MR         0x04    /* Mode register */
+#define   ATMEL_TSADCC_TSAMOD   (3    <<  0)    /* ADC mode */
+#define     ATMEL_TSADCC_TSAMOD_ADC_ONLY_MODE   (0x0)   /* ADC Mode */
+#define     ATMEL_TSADCC_TSAMOD_TS_ONLY_MODE    (0x1)   /* Touch Screen Only Mode */
+#define   ATMEL_TSADCC_LOWRES   (1    <<  4)    /* Resolution selection */
+#define   ATMEL_TSADCC_SLEEP    (1    <<  5)    /* Sleep mode */
+#define   ATMEL_TSADCC_PENDET   (1    <<  6)    /* Pen Detect selection */
+#define   ATMEL_TSADCC_PRESCAL  (0x3f <<  8)    /* Prescalar Rate Selection */
+#define   ATMEL_TSADCC_STARTUP  (0x7f << 16)    /* Start Up time */
+#define   ATMEL_TSADCC_SHTIM    (0xf  << 24)    /* Sample & Hold time */
+#define   ATMEL_TSADCC_PENDBC   (0xf  << 28)    /* Pen Detect debouncing time */
+
+#define ATMEL_TSADCC_TRGR       0x08    /* Trigger register */
+#define   ATMEL_TSADCC_TRGMOD   (7      <<  0)  /* Trigger mode */
+#define     ATMEL_TSADCC_TRGMOD_NONE            (0 << 0)
+#define     ATMEL_TSADCC_TRGMOD_EXT_RISING      (1 << 0)
+#define     ATMEL_TSADCC_TRGMOD_EXT_FALLING     (2 << 0)
+#define     ATMEL_TSADCC_TRGMOD_EXT_ANY         (3 << 0)
+#define     ATMEL_TSADCC_TRGMOD_PENDET          (4 << 0)
+#define     ATMEL_TSADCC_TRGMOD_PERIOD          (5 << 0)
+#define     ATMEL_TSADCC_TRGMOD_CONTINUOUS      (6 << 0)
+#define   ATMEL_TSADCC_TRGPER   (0xffff << 16)  /* Trigger period */
+
+#define ATMEL_TSADCC_TSR        0x0C    /* Touch Screen register */
+#define   ATMEL_TSADCC_TSFREQ   (0xf <<  0)     /* TS Frequency in Interleaved mode */
+#define   ATMEL_TSADCC_TSSHTIM  (0xf << 24)     /* Sample & Hold time */
+
+#define ATMEL_TSADCC_CHER       0x10    /* Channel Enable register */
+#define ATMEL_TSADCC_CHDR       0x14    /* Channel Disable register */
+#define ATMEL_TSADCC_CHSR       0x18    /* Channel Status register */
+#define   ATMEL_TSADCC_CH(n)    (1 << (n))      /* Channel number */
+
+#define ATMEL_TSADCC_SR         0x1C    /* Status register */
+#define   ATMEL_TSADCC_EOC(n)   (1 << ((n)+0))  /* End of conversion for channel N */
+#define   ATMEL_TSADCC_OVRE(n)  (1 << ((n)+8))  /* Overrun error for channel N */
+#define   ATMEL_TSADCC_DRDY     (1 << 16)       /* Data Ready */
+#define   ATMEL_TSADCC_GOVRE    (1 << 17)       /* General Overrun Error */
+#define   ATMEL_TSADCC_ENDRX    (1 << 18)       /* End of RX Buffer */
+#define   ATMEL_TSADCC_RXBUFF   (1 << 19)       /* TX Buffer full */
+#define   ATMEL_TSADCC_PENCNT   (1 << 20)       /* Pen contact */
+#define   ATMEL_TSADCC_NOCNT    (1 << 21)       /* No contact */
+
+#define ATMEL_TSADCC_LCDR       0x20    /* Last Converted Data register */
+#define   ATMEL_TSADCC_DATA     (0x3ff << 0)    /* Channel data */
+
+#define ATMEL_TSADCC_IER        0x24    /* Interrupt Enable register */
+#define ATMEL_TSADCC_IDR        0x28    /* Interrupt Disable register */
+#define ATMEL_TSADCC_IMR        0x2C    /* Interrupt Mask register */
+#define ATMEL_TSADCC_CDR0       0x30    /* Channel Data 0 */
+#define ATMEL_TSADCC_CDR1       0x34    /* Channel Data 1 */
+#define ATMEL_TSADCC_CDR2       0x38    /* Channel Data 2 */
+#define ATMEL_TSADCC_CDR3       0x3C    /* Channel Data 3 */
+#define ATMEL_TSADCC_CDR4       0x40    /* Channel Data 4 */
+#define ATMEL_TSADCC_CDR5       0x44    /* Channel Data 5 */
+
+#define ADC_CLOCK       1000000
+
+struct atmel_tsadcc {
+        struct input_dev        *input;
+        char                    phys[32];
+        struct clk              *clk;
+        int                     irq;
+};
+
+static void __iomem             *tsc_base;
+
+#define atmel_tsadcc_read(reg)          __raw_readl(tsc_base + (reg))
+#define atmel_tsadcc_write(reg, val)    __raw_writel((val), tsc_base + (reg))
+
+static irqreturn_t atmel_tsadcc_interrupt(int irq, void *dev)
+{
+        struct input_dev *input_dev = ((struct atmel_tsadcc *)dev)->input;
+
+        unsigned int absx;
+        unsigned int absy;
+        unsigned int status;
+        unsigned int reg;
+
+        status = atmel_tsadcc_read(ATMEL_TSADCC_SR);
+        status &= atmel_tsadcc_read(ATMEL_TSADCC_IMR);
+
+        if (status & ATMEL_TSADCC_NOCNT) {
+                /* Contact lost */
+                reg = atmel_tsadcc_read(ATMEL_TSADCC_MR) | ATMEL_TSADCC_PENDBC;
+
+                atmel_tsadcc_write(ATMEL_TSADCC_MR, reg);
+                atmel_tsadcc_write(ATMEL_TSADCC_TRGR, ATMEL_TSADCC_TRGMOD_NONE);
+                atmel_tsadcc_write(ATMEL_TSADCC_IDR,
+                                   ATMEL_TSADCC_EOC(3) | ATMEL_TSADCC_NOCNT);
+                atmel_tsadcc_write(ATMEL_TSADCC_IER, ATMEL_TSADCC_PENCNT);
+
+                input_report_key(input_dev, BTN_TOUCH, 0);
+                input_sync(input_dev);
+
+        } else if (status & ATMEL_TSADCC_PENCNT) {
+                /* Pen detected */
+                reg = atmel_tsadcc_read(ATMEL_TSADCC_MR);
+                reg &= ~ATMEL_TSADCC_PENDBC;
+
+                atmel_tsadcc_write(ATMEL_TSADCC_IDR, ATMEL_TSADCC_PENCNT);
+                atmel_tsadcc_write(ATMEL_TSADCC_MR, reg);
+                atmel_tsadcc_write(ATMEL_TSADCC_IER,
+                                   ATMEL_TSADCC_EOC(3) | ATMEL_TSADCC_NOCNT);
+                atmel_tsadcc_write(ATMEL_TSADCC_TRGR,
+                                   ATMEL_TSADCC_TRGMOD_PERIOD | (0x0FFF << 16));
+
+        } else if (status & ATMEL_TSADCC_EOC(3)) {
+                /* Conversion finished */
+
+                absx = atmel_tsadcc_read(ATMEL_TSADCC_CDR3) << 10;
+                absx /= atmel_tsadcc_read(ATMEL_TSADCC_CDR2);
+
+                absy = atmel_tsadcc_read(ATMEL_TSADCC_CDR1) << 10;
+                absy /= atmel_tsadcc_read(ATMEL_TSADCC_CDR0);
+
+                input_report_abs(input_dev, ABS_X, absx);
+                input_report_abs(input_dev, ABS_Y, absy);
+                input_report_key(input_dev, BTN_TOUCH, 1);
+                input_sync(input_dev);
+        }
+
+        return IRQ_HANDLED;
+}
+
+/*
+ * The functions for inserting/removing us as a module.
+ */
+
+static int __devinit atmel_tsadcc_probe(struct platform_device *pdev)
+{
+        struct atmel_tsadcc     *ts_dev;
+        struct input_dev        *input_dev;
+        struct resource         *res;
+        int             err = 0;
+        unsigned int    prsc;
+        unsigned int    reg;
+
+        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+        if (!res) {
+                dev_err(&pdev->dev, "no mmio resource defined.\n");
+                return -ENXIO;
+        }
+
+        /* Allocate memory for device */
+        ts_dev = kzalloc(sizeof(struct atmel_tsadcc), GFP_KERNEL);
+        if (!ts_dev) {
+                dev_err(&pdev->dev, "failed to allocate memory.\n");
+                return -ENOMEM;
+        }
+        platform_set_drvdata(pdev, ts_dev);
+
+        input_dev = input_allocate_device();
+        if (!input_dev) {
+                dev_err(&pdev->dev, "failed to allocate input device.\n");
+                err = -EBUSY;
+                goto err_free_mem;
+        }
+
+        ts_dev->irq = platform_get_irq(pdev, 0);
+        if (ts_dev->irq < 0) {
+                dev_err(&pdev->dev, "no irq ID is designated.\n");
+                err = -ENODEV;
+                goto err_free_dev;
+        }
+
+        if (!request_mem_region(res->start, res->end - res->start + 1,
+                                "atmel tsadcc regs")) {
+                dev_err(&pdev->dev, "resources is unavailable.\n");
+                err = -EBUSY;
+                goto err_free_dev;
+        }
+
+        tsc_base = ioremap(res->start, res->end - res->start + 1);
+        if (!tsc_base) {
+                dev_err(&pdev->dev, "failed to map registers.\n");
+                err = -ENOMEM;
+                goto err_release_mem;
+        }
+
+        err = request_irq(ts_dev->irq, atmel_tsadcc_interrupt, IRQF_DISABLED,
+                        pdev->dev.driver->name, ts_dev);
+        if (err) {
+                dev_err(&pdev->dev, "failed to allocate irq.\n");
+                goto err_unmap_regs;
+        }
+
+        ts_dev->clk = clk_get(&pdev->dev, "tsc_clk");
+        if (IS_ERR(ts_dev->clk)) {
+                dev_err(&pdev->dev, "failed to get ts_clk\n");
+                err = PTR_ERR(ts_dev->clk);
+                goto err_free_irq;
+        }
+
+        ts_dev->input = input_dev;
+
+        snprintf(ts_dev->phys, sizeof(ts_dev->phys),
+                 "%s/input0", pdev->dev.bus_id);
+
+        input_dev->name = "atmel touch screen controller";
+        input_dev->phys = ts_dev->phys;
+        input_dev->dev.parent = &pdev->dev;
+
+        input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+        input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+
+        input_set_abs_params(input_dev, ABS_X, 0, 0x3FF, 0, 0);
+        input_set_abs_params(input_dev, ABS_Y, 0, 0x3FF, 0, 0);
+
+        /* clk_enable() always returns 0, no need to check it */
+        clk_enable(ts_dev->clk);
+
+        prsc = clk_get_rate(ts_dev->clk);
+        dev_info(&pdev->dev, "Master clock is set at: %d Hz\n", prsc);
+
+        prsc = prsc / ADC_CLOCK / 2 - 1;
+
+        reg = ATMEL_TSADCC_TSAMOD_TS_ONLY_MODE          |
+                ((0x00 << 5) & ATMEL_TSADCC_SLEEP)      |       /* Normal Mode */
+                ((0x01 << 6) & ATMEL_TSADCC_PENDET)     |       /* Enable Pen Detect */
+                ((prsc << 8) & ATMEL_TSADCC_PRESCAL)    |       /* PRESCAL */
+                ((0x13 << 16) & ATMEL_TSADCC_STARTUP)   |       /* STARTUP */
+                ((0x0F << 28) & ATMEL_TSADCC_PENDBC);           /* PENDBC */
+
+        atmel_tsadcc_write(ATMEL_TSADCC_CR, ATMEL_TSADCC_SWRST);
+        atmel_tsadcc_write(ATMEL_TSADCC_MR, reg);
+        atmel_tsadcc_write(ATMEL_TSADCC_TRGR, ATMEL_TSADCC_TRGMOD_NONE);
+        atmel_tsadcc_write(ATMEL_TSADCC_TSR, (0x3 << 24) & ATMEL_TSADCC_TSSHTIM);
+
+        atmel_tsadcc_read(ATMEL_TSADCC_SR);
+        atmel_tsadcc_write(ATMEL_TSADCC_IER, ATMEL_TSADCC_PENCNT);
+
+        /* All went ok, so register to the input system */
+        err = input_register_device(input_dev);
+        if (err)
+                goto err_fail;
+
+        return 0;
+
+err_fail:
+        clk_disable(ts_dev->clk);
+        clk_put(ts_dev->clk);
+err_free_irq:
+        free_irq(ts_dev->irq, ts_dev);
+err_unmap_regs:
+        iounmap(tsc_base);
+err_release_mem:
+        release_mem_region(res->start, res->end - res->start + 1);
+err_free_dev:
+        input_free_device(ts_dev->input);
+err_free_mem:
+        kfree(ts_dev);
+        return err;
+}
+
+static int __devexit atmel_tsadcc_remove(struct platform_device *pdev)
+{
+        struct atmel_tsadcc *ts_dev = dev_get_drvdata(&pdev->dev);
+        struct resource *res;
+
+        free_irq(ts_dev->irq, ts_dev);
+
+        input_unregister_device(ts_dev->input);
+
+        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+        iounmap(tsc_base);
+        release_mem_region(res->start, res->end - res->start + 1);
+
+        clk_disable(ts_dev->clk);
+        clk_put(ts_dev->clk);
+
+        kfree(ts_dev);
+
+        return 0;
+}
+
+static struct platform_driver atmel_tsadcc_driver = {
+        .probe          = atmel_tsadcc_probe,
+        .remove         = __devexit_p(atmel_tsadcc_remove),
+        .driver         = {
+                .name   = "atmel_tsadcc",
+        },
+};
+
+static int __init atmel_tsadcc_init(void)
+{
+        return platform_driver_register(&atmel_tsadcc_driver);
+}
+
+static void __exit atmel_tsadcc_exit(void)
+{
+        platform_driver_unregister(&atmel_tsadcc_driver);
+}
+
+module_init(atmel_tsadcc_init);
+module_exit(atmel_tsadcc_exit);
+
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Atmel TouchScreen Driver");
+MODULE_AUTHOR("Dan Liang <dan.liang@atmel.com>");
+
diff --git a/drivers/isdn/gigaset/isocdata.c b/drivers/isdn/gigaset/isocdata.c
index e30a7773f93c..fbce5222d83c 100644
--- a/drivers/isdn/gigaset/isocdata.c
+++ b/drivers/isdn/gigaset/isocdata.c
@@ -247,7 +247,6 @@ static inline void dump_bytes(enum debuglevel level, const char *tag,
 #ifdef CONFIG_GIGASET_DEBUG
         unsigned char c;
         static char dbgline[3 * 32 + 1];
-        static const char hexdigit[] = "0123456789abcdef";
         int i = 0;
         while (count-- > 0) {
                 if (i > sizeof(dbgline) - 4) {
@@ -258,8 +257,8 @@ static inline void dump_bytes(enum debuglevel level, const char *tag,
                 c = *bytes++;
                 dbgline[i] = (i && !(i % 12)) ? '-' : ' ';
                 i++;
-                dbgline[i++] = hexdigit[(c >> 4) & 0x0f];
-                dbgline[i++] = hexdigit[c & 0x0f];
+                dbgline[i++] = hex_asc_hi(c);
+                dbgline[i++] = hex_asc_lo(c);
         }
         dbgline[i] = '\0';
         gig_dbg(level, "%s:%s", tag, dbgline);
diff --git a/drivers/isdn/hardware/mISDN/Kconfig b/drivers/isdn/hardware/mISDN/Kconfig
index 9cd5f5f62280..14793480c453 100644
--- a/drivers/isdn/hardware/mISDN/Kconfig
+++ b/drivers/isdn/hardware/mISDN/Kconfig
@@ -7,7 +7,6 @@ config MISDN_HFCPCI
         tristate "Support for HFC PCI cards"
         depends on MISDN
         depends on PCI
-        depends on VIRT_TO_BUS
         help
           Enable support for cards with Cologne Chip AG's
           HFC PCI chip.
diff --git a/drivers/isdn/hardware/mISDN/hfcpci.c b/drivers/isdn/hardware/mISDN/hfcpci.c
index 917968530e1e..3231814e7efa 100644
--- a/drivers/isdn/hardware/mISDN/hfcpci.c
+++ b/drivers/isdn/hardware/mISDN/hfcpci.c
@@ -1988,8 +1988,7 @@ setup_hw(struct hfc_pci *hc)
         printk(KERN_INFO
                 "HFC-PCI: defined at mem %#lx fifo %#lx(%#lx) IRQ %d HZ %d\n",
                 (u_long) hc->hw.pci_io, (u_long) hc->hw.fifos,
-                (u_long) virt_to_bus(hc->hw.fifos),
-                hc->irq, HZ);
+                (u_long) hc->hw.dmahandle, hc->irq, HZ);
         /* enable memory mapped ports, disable busmaster */
         pci_write_config_word(hc->pdev, PCI_COMMAND, PCI_ENA_MEMIO);
         hc->hw.int_m2 = 0;
diff --git a/drivers/isdn/hysdn/hysdn_pof.h b/drivers/isdn/hysdn/hysdn_pof.h
index a368d6caca0e..3a72b908900f 100644
--- a/drivers/isdn/hysdn/hysdn_pof.h
+++ b/drivers/isdn/hysdn/hysdn_pof.h
@@ -60,7 +60,7 @@ typedef struct PofRecHdr_tag {	/* Pof record header */
 
 typedef struct PofTimeStamp_tag {
 /*00 */ unsigned long UnixTime __attribute__((packed));
-        /*04 */ unsigned char DateTimeText[0x28] __attribute__((packed));
+        /*04 */ unsigned char DateTimeText[0x28];
         /* =40 */
 /*2C */
 } tPofTimeStamp;
diff --git a/drivers/lguest/core.c b/drivers/lguest/core.c
index 5eea4356d703..90663e01a56e 100644
--- a/drivers/lguest/core.c
+++ b/drivers/lguest/core.c
@@ -135,6 +135,7 @@ static void unmap_switcher(void)
         /* Now we just need to free the pages we copied the switcher into */
         for (i = 0; i < TOTAL_SWITCHER_PAGES; i++)
                 __free_pages(switcher_page[i], 0);
+        kfree(switcher_page);
 }
 
 /*H:032
diff --git a/drivers/lguest/interrupts_and_traps.c b/drivers/lguest/interrupts_and_traps.c
index 0414ddf87587..a1039068f95c 100644
--- a/drivers/lguest/interrupts_and_traps.c
+++ b/drivers/lguest/interrupts_and_traps.c
@@ -406,7 +406,8 @@ void load_guest_idt_entry(struct lg_cpu *cpu, unsigned int num, u32 lo, u32 hi)
  * deliver_trap() to bounce it back into the Guest. */
 static void default_idt_entry(struct desc_struct *idt,
                               int trap,
-                              const unsigned long handler)
+                              const unsigned long handler,
+                              const struct desc_struct *base)
 {
         /* A present interrupt gate. */
         u32 flags = 0x8e00;
@@ -415,6 +416,10 @@ static void default_idt_entry(struct desc_struct *idt,
          * the Guest to use the "int" instruction to trigger it. */
         if (trap == LGUEST_TRAP_ENTRY)
                 flags |= (GUEST_PL << 13);
+        else if (base)
+                /* Copy priv. level from what Guest asked for.  This allows
+                 * debug (int 3) traps from Guest userspace, for example. */
+                flags |= (base->b & 0x6000);
 
         /* Now pack it into the IDT entry in its weird format. */
         idt->a = (LGUEST_CS<<16) | (handler&0x0000FFFF);
@@ -428,7 +433,7 @@ void setup_default_idt_entries(struct lguest_ro_state *state,
         unsigned int i;
 
         for (i = 0; i < ARRAY_SIZE(state->guest_idt); i++)
-                default_idt_entry(&state->guest_idt[i], i, def[i]);
+                default_idt_entry(&state->guest_idt[i], i, def[i], NULL);
 }
 
 /*H:240 We don't use the IDT entries in the "struct lguest" directly, instead
@@ -442,6 +447,8 @@ void copy_traps(const struct lg_cpu *cpu, struct desc_struct *idt,
         /* We can simply copy the direct traps, otherwise we use the default
          * ones in the Switcher: they will return to the Host. */
         for (i = 0; i < ARRAY_SIZE(cpu->arch.idt); i++) {
+                const struct desc_struct *gidt = &cpu->arch.idt[i];
+
                 /* If no Guest can ever override this trap, leave it alone. */
                 if (!direct_trap(i))
                         continue;
@@ -449,12 +456,15 @@ void copy_traps(const struct lg_cpu *cpu, struct desc_struct *idt,
                 /* Only trap gates (type 15) can go direct to the Guest.
                  * Interrupt gates (type 14) disable interrupts as they are
                  * entered, which we never let the Guest do.  Not present
-                 * entries (type 0x0) also can't go direct, of course. */
-                if (idt_type(cpu->arch.idt[i].a, cpu->arch.idt[i].b) == 0xF)
-                        idt[i] = cpu->arch.idt[i];
+                 * entries (type 0x0) also can't go direct, of course.
+                 *
+                 * If it can't go direct, we still need to copy the priv. level:
+                 * they might want to give userspace access to a software
+                 * interrupt. */
+                if (idt_type(gidt->a, gidt->b) == 0xF)
+                        idt[i] = *gidt;
                 else
-                        /* Reset it to the default. */
-                        default_idt_entry(&idt[i], i, def[i]);
+                        default_idt_entry(&idt[i], i, def[i], gidt);
         }
 }
 
diff --git a/drivers/lguest/x86/core.c b/drivers/lguest/x86/core.c
index 95dfda52b4f9..bf7942327bda 100644
--- a/drivers/lguest/x86/core.c
+++ b/drivers/lguest/x86/core.c
@@ -480,7 +480,7 @@ void __init lguest_arch_host_init(void)
                  * bit on its CPU, depending on the argument (0 == unset). */
                 on_each_cpu(adjust_pge, (void *)0, 1);
                 /* Turn off the feature in the global feature set. */
-                clear_bit(X86_FEATURE_PGE, boot_cpu_data.x86_capability);
+                clear_cpu_cap(&boot_cpu_data, X86_FEATURE_PGE);
         }
         put_online_cpus();
 };
@@ -491,7 +491,7 @@ void __exit lguest_arch_host_fini(void)
         /* If we had PGE before we started, turn it back on now. */
         get_online_cpus();
         if (cpu_had_pge) {
-                set_bit(X86_FEATURE_PGE, boot_cpu_data.x86_capability);
+                set_cpu_cap(&boot_cpu_data, X86_FEATURE_PGE);
                 /* adjust_pge's argument "1" means set PGE. */
                 on_each_cpu(adjust_pge, (void *)1, 1);
         }
diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c
index 621a272a2c74..7e65bad522cb 100644
--- a/drivers/md/bitmap.c
+++ b/drivers/md/bitmap.c
@@ -1234,7 +1234,7 @@ int bitmap_startwrite(struct bitmap *bitmap, sector_t offset, unsigned long sect
                 case 0:
                         bitmap_file_set_bit(bitmap, offset);
                         bitmap_count_page(bitmap,offset, 1);
-                        blk_plug_device(bitmap->mddev->queue);
+                        blk_plug_device_unlocked(bitmap->mddev->queue);
                         /* fall through */
                 case 1:
                         *bmc = 2;
diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c
index 798e468103b8..61f441409234 100644
--- a/drivers/md/dm-table.c
+++ b/drivers/md/dm-table.c
@@ -316,29 +316,12 @@ static inline int check_space(struct dm_table *t)
  */
 static int lookup_device(const char *path, dev_t *dev)
 {
-        int r;
-        struct nameidata nd;
-        struct inode *inode;
-
-        if ((r = path_lookup(path, LOOKUP_FOLLOW, &nd)))
-                return r;
-
-        inode = nd.path.dentry->d_inode;
-        if (!inode) {
-                r = -ENOENT;
-                goto out;
-        }
-
-        if (!S_ISBLK(inode->i_mode)) {
-                r = -ENOTBLK;
-                goto out;
-        }
-
-        *dev = inode->i_rdev;
-
- out:
-        path_put(&nd.path);
-        return r;
+        struct block_device *bdev = lookup_bdev(path);
+        if (IS_ERR(bdev))
+                return PTR_ERR(bdev);
+        *dev = bdev->bd_dev;
+        bdput(bdev);
+        return 0;
 }
 
 /*
diff --git a/drivers/media/common/saa7146_fops.c b/drivers/media/common/saa7146_fops.c
index 171afe7da6b6..cf6a817d5059 100644
--- a/drivers/media/common/saa7146_fops.c
+++ b/drivers/media/common/saa7146_fops.c
@@ -563,7 +563,7 @@ int saa7146_unregister_device(struct video_device **vid, struct saa7146_dev* dev
 
         DEB_EE(("dev:%p\n",dev));
 
-        if( VFL_TYPE_GRABBER == (*vid)->type ) {
+        if ((*vid)->vfl_type == VFL_TYPE_GRABBER) {
                 vv->video_minor = -1;
         } else {
                 vv->vbi_minor = -1;
diff --git a/drivers/media/common/saa7146_video.c b/drivers/media/common/saa7146_video.c
index a5e62750eea3..e8bc7abf2409 100644
--- a/drivers/media/common/saa7146_video.c
+++ b/drivers/media/common/saa7146_video.c
@@ -656,7 +656,7 @@ static int saa7146_pgtable_build(struct saa7146_dev *dev, struct saa7146_buf *bu
 
                 /* if we have a user buffer, the first page may not be
                    aligned to a page boundary. */
-                pt1->offset = list->offset;
+                pt1->offset = dma->sglist->offset;
                 pt2->offset = pt1->offset+o1;
                 pt3->offset = pt1->offset+o2;
 
@@ -958,21 +958,18 @@ int saa7146_video_do_ioctl(struct inode *inode, struct file *file, unsigned int
         case VIDIOC_ENUM_FMT:
         {
                 struct v4l2_fmtdesc *f = arg;
-                int index;
 
                 switch (f->type) {
                 case V4L2_BUF_TYPE_VIDEO_CAPTURE:
-                case V4L2_BUF_TYPE_VIDEO_OVERLAY: {
-                        index = f->index;
-                        if (index < 0 || index >= NUM_FORMATS) {
+                case V4L2_BUF_TYPE_VIDEO_OVERLAY:
+                        if (f->index >= NUM_FORMATS)
                                 return -EINVAL;
-                        }
-                        memset(f,0,sizeof(*f));
-                        f->index = index;
-                        strlcpy((char *)f->description,formats[index].name,sizeof(f->description));
-                        f->pixelformat = formats[index].pixelformat;
+                        strlcpy((char *)f->description, formats[f->index].name,
+                                        sizeof(f->description));
+                        f->pixelformat = formats[f->index].pixelformat;
+                        f->flags = 0;
+                        memset(f->reserved, 0, sizeof(f->reserved));
                         break;
-                }
                 default:
                         return -EINVAL;
                 }
diff --git a/drivers/media/common/tuners/Kconfig b/drivers/media/common/tuners/Kconfig
index 850d5689b14d..6f92beaa5ac8 100644
--- a/drivers/media/common/tuners/Kconfig
+++ b/drivers/media/common/tuners/Kconfig
@@ -21,9 +21,8 @@ config MEDIA_TUNER
         tristate
         default VIDEO_MEDIA && I2C
         depends on VIDEO_MEDIA && I2C
-        select FW_LOADER if !MEDIA_TUNER_CUSTOMIZE && HOTPLUG
-        select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMIZE && HOTPLUG
-        select MEDIA_TUNER_XC5000 if !MEDIA_TUNER_CUSTOMIZE && HOTPLUG
+        select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMIZE
+        select MEDIA_TUNER_XC5000 if !MEDIA_TUNER_CUSTOMIZE
         select MEDIA_TUNER_MT20XX if !MEDIA_TUNER_CUSTOMIZE
         select MEDIA_TUNER_TDA8290 if !MEDIA_TUNER_CUSTOMIZE
         select MEDIA_TUNER_TEA5761 if !MEDIA_TUNER_CUSTOMIZE
@@ -138,8 +137,6 @@ config MEDIA_TUNER_QT1010
 config MEDIA_TUNER_XC2028
         tristate "XCeive xc2028/xc3028 tuners"
         depends on VIDEO_MEDIA && I2C
-        depends on HOTPLUG
-        select FW_LOADER
         default m if MEDIA_TUNER_CUSTOMIZE
         help
           Say Y here to include support for the xc2028/xc3028 tuners.
@@ -147,8 +144,6 @@ config MEDIA_TUNER_XC2028
 config MEDIA_TUNER_XC5000
         tristate "Xceive XC5000 silicon tuner"
         depends on VIDEO_MEDIA && I2C
-        depends on HOTPLUG
-        select FW_LOADER
         default m if DVB_FE_CUSTOMISE
         help
           A driver for the silicon tuner XC5000 from Xceive.
@@ -162,4 +157,11 @@ config MEDIA_TUNER_MXL5005S
         help
           A driver for the silicon tuner MXL5005S from MaxLinear.
 
+config MEDIA_TUNER_MXL5007T
+        tristate "MaxLinear MxL5007T silicon tuner"
+        depends on VIDEO_MEDIA && I2C
+        default m if DVB_FE_CUSTOMISE
+        help
+          A driver for the silicon tuner MxL5007T from MaxLinear.
+
 endif # MEDIA_TUNER_CUSTOMIZE
diff --git a/drivers/media/common/tuners/Makefile b/drivers/media/common/tuners/Makefile
index 55f7e6706297..4dfbe5b8264f 100644
--- a/drivers/media/common/tuners/Makefile
+++ b/drivers/media/common/tuners/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_MEDIA_TUNER_MT2266) += mt2266.o
 obj-$(CONFIG_MEDIA_TUNER_QT1010) += qt1010.o
 obj-$(CONFIG_MEDIA_TUNER_MT2131) += mt2131.o
 obj-$(CONFIG_MEDIA_TUNER_MXL5005S) += mxl5005s.o
+obj-$(CONFIG_MEDIA_TUNER_MXL5007T) += mxl5007t.o
 
 EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
 EXTRA_CFLAGS += -Idrivers/media/dvb/frontends
diff --git a/drivers/media/common/tuners/mt20xx.c b/drivers/media/common/tuners/mt20xx.c
index fbcb28233737..35b763a16d53 100644
--- a/drivers/media/common/tuners/mt20xx.c
+++ b/drivers/media/common/tuners/mt20xx.c
@@ -148,7 +148,8 @@ static int mt2032_compute_freq(struct dvb_frontend *fe,
         tuner_dbg("mt2032: rfin=%d lo2=%d lo2n=%d lo2a=%d num=%d lo2freq=%d\n",
                   rfin,lo2,lo2n,lo2a,lo2num,lo2freq);
 
-        if(lo1a<0 || lo1a>7 || lo1n<17 ||lo1n>48 || lo2a<0 ||lo2a >7 ||lo2n<17 || lo2n>30) {
+        if (lo1a > 7 || lo1n < 17 || lo1n > 48 || lo2a > 7 || lo2n < 17 ||
+                        lo2n > 30) {
                 tuner_info("mt2032: frequency parameters out of range: %d %d %d %d\n",
                            lo1a, lo1n, lo2a,lo2n);
                 return(-1);
diff --git a/drivers/media/common/tuners/mxl5007t.c b/drivers/media/common/tuners/mxl5007t.c
new file mode 100644
index 000000000000..cb25e43502fe
--- /dev/null
+++ b/drivers/media/common/tuners/mxl5007t.c
@@ -0,0 +1,1030 @@
+/*
+ *  mxl5007t.c - driver for the MaxLinear MxL5007T silicon tuner
+ *
+ *  Copyright (C) 2008 Michael Krufky <mkrufky@linuxtv.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/i2c.h>
+#include <linux/types.h>
+#include <linux/videodev2.h>
+#include "tuner-i2c.h"
+#include "mxl5007t.h"
+
+static DEFINE_MUTEX(mxl5007t_list_mutex);
+static LIST_HEAD(hybrid_tuner_instance_list);
+
+static int mxl5007t_debug;
+module_param_named(debug, mxl5007t_debug, int, 0644);
+MODULE_PARM_DESC(debug, "set debug level");
+
+/* ------------------------------------------------------------------------- */
+
+#define mxl_printk(kern, fmt, arg...) \
+        printk(kern "%s: " fmt "\n", __func__, ##arg)
+
+#define mxl_err(fmt, arg...) \
+        mxl_printk(KERN_ERR, "%d: " fmt, __LINE__, ##arg)
+
+#define mxl_warn(fmt, arg...) \
+        mxl_printk(KERN_WARNING, fmt, ##arg)
+
+#define mxl_info(fmt, arg...) \
+        mxl_printk(KERN_INFO, fmt, ##arg)
+
+#define mxl_debug(fmt, arg...)                          \
+({                                                      \
+        if (mxl5007t_debug)                             \
+                mxl_printk(KERN_DEBUG, fmt, ##arg);     \
+})
+
+#define mxl_fail(ret)                                                   \
+({                                                                      \
+        int __ret;                                                      \
+        __ret = (ret < 0);                                              \
+        if (__ret)                                                      \
+                mxl_printk(KERN_ERR, "error %d on line %d",             \
+                           ret, __LINE__);                              \
+        __ret;                                                          \
+})
+
+/* ------------------------------------------------------------------------- */
+
+#define MHz 1000000
+
+enum mxl5007t_mode {
+        MxL_MODE_OTA_DVBT_ATSC        =    0,
+        MxL_MODE_OTA_NTSC_PAL_GH      =    1,
+        MxL_MODE_OTA_PAL_IB           =    2,
+        MxL_MODE_OTA_PAL_D_SECAM_KL   =    3,
+        MxL_MODE_OTA_ISDBT            =    4,
+        MxL_MODE_CABLE_DIGITAL        = 0x10,
+        MxL_MODE_CABLE_NTSC_PAL_GH    = 0x11,
+        MxL_MODE_CABLE_PAL_IB         = 0x12,
+        MxL_MODE_CABLE_PAL_D_SECAM_KL = 0x13,
+        MxL_MODE_CABLE_SCTE40         = 0x14,
+};
+
+enum mxl5007t_chip_version {
+        MxL_UNKNOWN_ID     = 0x00,
+        MxL_5007_V1_F1     = 0x11,
+        MxL_5007_V1_F2     = 0x12,
+        MxL_5007_V2_100_F1 = 0x21,
+        MxL_5007_V2_100_F2 = 0x22,
+        MxL_5007_V2_200_F1 = 0x23,
+        MxL_5007_V2_200_F2 = 0x24,
+};
+
+struct reg_pair_t {
+        u8 reg;
+        u8 val;
+};
+
+/* ------------------------------------------------------------------------- */
+
+static struct reg_pair_t init_tab[] = {
+        { 0x0b, 0x44 }, /* XTAL */
+        { 0x0c, 0x60 }, /* IF */
+        { 0x10, 0x00 }, /* MISC */
+        { 0x12, 0xca }, /* IDAC */
+        { 0x16, 0x90 }, /* MODE */
+        { 0x32, 0x38 }, /* MODE Analog/Digital */
+        { 0xd8, 0x18 }, /* CLK_OUT_ENABLE */
+        { 0x2c, 0x34 }, /* OVERRIDE */
+        { 0x4d, 0x40 }, /* OVERRIDE */
+        { 0x7f, 0x02 }, /* OVERRIDE */
+        { 0x9a, 0x52 }, /* OVERRIDE */
+        { 0x48, 0x5a }, /* OVERRIDE */
+        { 0x76, 0x1a }, /* OVERRIDE */
+        { 0x6a, 0x48 }, /* OVERRIDE */
+        { 0x64, 0x28 }, /* OVERRIDE */
+        { 0x66, 0xe6 }, /* OVERRIDE */
+        { 0x35, 0x0e }, /* OVERRIDE */
+        { 0x7e, 0x01 }, /* OVERRIDE */
+        { 0x83, 0x00 }, /* OVERRIDE */
+        { 0x04, 0x0b }, /* OVERRIDE */
+        { 0x05, 0x01 }, /* TOP_MASTER_ENABLE */
+        { 0, 0 }
+};
+
+static struct reg_pair_t init_tab_cable[] = {
+        { 0x0b, 0x44 }, /* XTAL */
+        { 0x0c, 0x60 }, /* IF */
+        { 0x10, 0x00 }, /* MISC */
+        { 0x12, 0xca }, /* IDAC */
+        { 0x16, 0x90 }, /* MODE */
+        { 0x32, 0x38 }, /* MODE A/D */
+        { 0x71, 0x3f }, /* TOP1 */
+        { 0x72, 0x3f }, /* TOP2 */
+        { 0x74, 0x3f }, /* TOP3 */
+        { 0xd8, 0x18 }, /* CLK_OUT_ENABLE */
+        { 0x2c, 0x34 }, /* OVERRIDE */
+        { 0x4d, 0x40 }, /* OVERRIDE */
+        { 0x7f, 0x02 }, /* OVERRIDE */
+        { 0x9a, 0x52 }, /* OVERRIDE */
+        { 0x48, 0x5a }, /* OVERRIDE */
+        { 0x76, 0x1a }, /* OVERRIDE */
+        { 0x6a, 0x48 }, /* OVERRIDE */
+        { 0x64, 0x28 }, /* OVERRIDE */
+        { 0x66, 0xe6 }, /* OVERRIDE */
+        { 0x35, 0x0e }, /* OVERRIDE */
+        { 0x7e, 0x01 }, /* OVERRIDE */
+        { 0x04, 0x0b }, /* OVERRIDE */
+        { 0x68, 0xb4 }, /* OVERRIDE */
+        { 0x36, 0x00 }, /* OVERRIDE */
+        { 0x05, 0x01 }, /* TOP_MASTER_ENABLE */
+        { 0, 0 }
+};
+
+/* ------------------------------------------------------------------------- */
+
+static struct reg_pair_t reg_pair_rftune[] = {
+        { 0x11, 0x00 }, /* abort tune */
+        { 0x13, 0x15 },
+        { 0x14, 0x40 },
+        { 0x15, 0x0e },
+        { 0x11, 0x02 }, /* start tune */
+        { 0, 0 }
+};
+
+/* ------------------------------------------------------------------------- */
+
+struct mxl5007t_state {
+        struct list_head hybrid_tuner_instance_list;
+        struct tuner_i2c_props i2c_props;
+
+        struct mutex lock;
+
+        struct mxl5007t_config *config;
+
+        enum mxl5007t_chip_version chip_id;
+
+        struct reg_pair_t tab_init[ARRAY_SIZE(init_tab)];
+        struct reg_pair_t tab_init_cable[ARRAY_SIZE(init_tab_cable)];
+        struct reg_pair_t tab_rftune[ARRAY_SIZE(reg_pair_rftune)];
+
+        u32 frequency;
+        u32 bandwidth;
+};
+
+/* ------------------------------------------------------------------------- */
+
+/* called by _init and _rftun to manipulate the register arrays */
+
+static void set_reg_bits(struct reg_pair_t *reg_pair, u8 reg, u8 mask, u8 val)
+{
+        unsigned int i = 0;
+
+        while (reg_pair[i].reg || reg_pair[i].val) {
+                if (reg_pair[i].reg == reg) {
+                        reg_pair[i].val &= ~mask;
+                        reg_pair[i].val |= val;
+                }
+                i++;
+
+        }
+        return;
+}
+
+static void copy_reg_bits(struct reg_pair_t *reg_pair1,
+                          struct reg_pair_t *reg_pair2)
+{
+        unsigned int i, j;
+
+        i = j = 0;
+
+        while (reg_pair1[i].reg || reg_pair1[i].val) {
+                while (reg_pair2[j].reg || reg_pair2[j].reg) {
+                        if (reg_pair1[i].reg != reg_pair2[j].reg) {
+                                j++;
+                                continue;
+                        }
+                        reg_pair2[j].val = reg_pair1[i].val;
+                        break;
+                }
+                i++;
+        }
+        return;
+}
+
+/* ------------------------------------------------------------------------- */
+
+static void mxl5007t_set_mode_bits(struct mxl5007t_state *state,
+                                   enum mxl5007t_mode mode,
+                                   s32 if_diff_out_level)
+{
+        switch (mode) {
+        case MxL_MODE_OTA_DVBT_ATSC:
+                set_reg_bits(state->tab_init, 0x32, 0x0f, 0x06);
+                set_reg_bits(state->tab_init, 0x35, 0xff, 0x0e);
+                break;
+        case MxL_MODE_OTA_ISDBT:
+                set_reg_bits(state->tab_init, 0x32, 0x0f, 0x06);
+                set_reg_bits(state->tab_init, 0x35, 0xff, 0x12);
+                break;
+        case MxL_MODE_OTA_NTSC_PAL_GH:
+                set_reg_bits(state->tab_init, 0x16, 0x70, 0x00);
+                set_reg_bits(state->tab_init, 0x32, 0xff, 0x85);
+                break;
+        case MxL_MODE_OTA_PAL_IB:
+                set_reg_bits(state->tab_init, 0x16, 0x70, 0x10);
+                set_reg_bits(state->tab_init, 0x32, 0xff, 0x85);
+                break;
+        case MxL_MODE_OTA_PAL_D_SECAM_KL:
+                set_reg_bits(state->tab_init, 0x16, 0x70, 0x20);
+                set_reg_bits(state->tab_init, 0x32, 0xff, 0x85);
+                break;
+        case MxL_MODE_CABLE_DIGITAL:
+                set_reg_bits(state->tab_init_cable, 0x71, 0xff, 0x01);
+                set_reg_bits(state->tab_init_cable, 0x72, 0xff,
+                             8 - if_diff_out_level);
+                set_reg_bits(state->tab_init_cable, 0x74, 0xff, 0x17);
+                break;
+        case MxL_MODE_CABLE_NTSC_PAL_GH:
+                set_reg_bits(state->tab_init, 0x16, 0x70, 0x00);
+                set_reg_bits(state->tab_init, 0x32, 0xff, 0x85);
+                set_reg_bits(state->tab_init_cable, 0x71, 0xff, 0x01);
+                set_reg_bits(state->tab_init_cable, 0x72, 0xff,
+                             8 - if_diff_out_level);
+                set_reg_bits(state->tab_init_cable, 0x74, 0xff, 0x17);
+                break;
+        case MxL_MODE_CABLE_PAL_IB:
+                set_reg_bits(state->tab_init, 0x16, 0x70, 0x10);
+                set_reg_bits(state->tab_init, 0x32, 0xff, 0x85);
+                set_reg_bits(state->tab_init_cable, 0x71, 0xff, 0x01);
+                set_reg_bits(state->tab_init_cable, 0x72, 0xff,
+                             8 - if_diff_out_level);
+                set_reg_bits(state->tab_init_cable, 0x74, 0xff, 0x17);
+                break;
+        case MxL_MODE_CABLE_PAL_D_SECAM_KL:
+                set_reg_bits(state->tab_init, 0x16, 0x70, 0x20);
+                set_reg_bits(state->tab_init, 0x32, 0xff, 0x85);
+                set_reg_bits(state->tab_init_cable, 0x71, 0xff, 0x01);
+                set_reg_bits(state->tab_init_cable, 0x72, 0xff,
+                             8 - if_diff_out_level);
+                set_reg_bits(state->tab_init_cable, 0x74, 0xff, 0x17);
+                break;
+        case MxL_MODE_CABLE_SCTE40:
+                set_reg_bits(state->tab_init_cable, 0x36, 0xff, 0x08);
+                set_reg_bits(state->tab_init_cable, 0x68, 0xff, 0xbc);
+                set_reg_bits(state->tab_init_cable, 0x71, 0xff, 0x01);
+                set_reg_bits(state->tab_init_cable, 0x72, 0xff,
+                             8 - if_diff_out_level);
+                set_reg_bits(state->tab_init_cable, 0x74, 0xff, 0x17);
+                break;
+        default:
+                mxl_fail(-EINVAL);
+        }
+        return;
+}
+
+static void mxl5007t_set_if_freq_bits(struct mxl5007t_state *state,
+                                      enum mxl5007t_if_freq if_freq,
+                                      int invert_if)
+{
+        u8 val;
+
+        switch (if_freq) {
+        case MxL_IF_4_MHZ:
+                val = 0x00;
+                break;
+        case MxL_IF_4_5_MHZ:
+                val = 0x20;
+                break;
+        case MxL_IF_4_57_MHZ:
+                val = 0x30;
+                break;
+        case MxL_IF_5_MHZ:
+                val = 0x40;
+                break;
+        case MxL_IF_5_38_MHZ:
+                val = 0x50;
+                break;
+        case MxL_IF_6_MHZ:
+                val = 0x60;
+                break;
+        case MxL_IF_6_28_MHZ:
+                val = 0x70;
+                break;
+        case MxL_IF_9_1915_MHZ:
+                val = 0x80;
+                break;
+        case MxL_IF_35_25_MHZ:
+                val = 0x90;
+                break;
+        case MxL_IF_36_15_MHZ:
+                val = 0xa0;
+                break;
+        case MxL_IF_44_MHZ:
+                val = 0xb0;
+                break;
+        default:
+                mxl_fail(-EINVAL);
+                return;
+        }
+        set_reg_bits(state->tab_init, 0x0c, 0xf0, val);
+
+        /* set inverted IF or normal IF */
+        set_reg_bits(state->tab_init, 0x0c, 0x08, invert_if ? 0x08 : 0x00);
+
+        return;
+}
+
+static void mxl5007t_set_xtal_freq_bits(struct mxl5007t_state *state,
+                                        enum mxl5007t_xtal_freq xtal_freq)
+{
+        u8 val;
+
+        switch (xtal_freq) {
+        case MxL_XTAL_16_MHZ:
+                val = 0x00; /* select xtal freq & Ref Freq */
+                break;
+        case MxL_XTAL_20_MHZ:
+                val = 0x11;
+                break;
+        case MxL_XTAL_20_25_MHZ:
+                val = 0x22;
+                break;
+        case MxL_XTAL_20_48_MHZ:
+                val = 0x33;
+                break;
+        case MxL_XTAL_24_MHZ:
+                val = 0x44;
+                break;
+        case MxL_XTAL_25_MHZ:
+                val = 0x55;
+                break;
+        case MxL_XTAL_25_14_MHZ:
+                val = 0x66;
+                break;
+        case MxL_XTAL_27_MHZ:
+                val = 0x77;
+                break;
+        case MxL_XTAL_28_8_MHZ:
+                val = 0x88;
+                break;
+        case MxL_XTAL_32_MHZ:
+                val = 0x99;
+                break;
+        case MxL_XTAL_40_MHZ:
+                val = 0xaa;
+                break;
+        case MxL_XTAL_44_MHZ:
+                val = 0xbb;
+                break;
+        case MxL_XTAL_48_MHZ:
+                val = 0xcc;
+                break;
+        case MxL_XTAL_49_3811_MHZ:
+                val = 0xdd;
+                break;
+        default:
+                mxl_fail(-EINVAL);
+                return;
+        }
+        set_reg_bits(state->tab_init, 0x0b, 0xff, val);
+
+        return;
+}
+
+static struct reg_pair_t *mxl5007t_calc_init_regs(struct mxl5007t_state *state,
+                                                  enum mxl5007t_mode mode)
+{
+        struct mxl5007t_config *cfg = state->config;
+
+        memcpy(&state->tab_init, &init_tab, sizeof(init_tab));
+        memcpy(&state->tab_init_cable, &init_tab_cable, sizeof(init_tab_cable));
+
+        mxl5007t_set_mode_bits(state, mode, cfg->if_diff_out_level);
+        mxl5007t_set_if_freq_bits(state, cfg->if_freq_hz, cfg->invert_if);
+        mxl5007t_set_xtal_freq_bits(state, cfg->xtal_freq_hz);
+
+        set_reg_bits(state->tab_init, 0x10, 0x40, cfg->loop_thru_enable << 6);
+
+        set_reg_bits(state->tab_init, 0xd8, 0x08, cfg->clk_out_enable << 3);
+
+        set_reg_bits(state->tab_init, 0x10, 0x07, cfg->clk_out_amp);
+
+        /* set IDAC to automatic mode control by AGC */
+        set_reg_bits(state->tab_init, 0x12, 0x80, 0x00);
+
+        if (mode >= MxL_MODE_CABLE_DIGITAL) {
+                copy_reg_bits(state->tab_init, state->tab_init_cable);
+                return state->tab_init_cable;
+        } else
+                return state->tab_init;
+}
+
+/* ------------------------------------------------------------------------- */
+
+enum mxl5007t_bw_mhz {
+        MxL_BW_6MHz = 6,
+        MxL_BW_7MHz = 7,
+        MxL_BW_8MHz = 8,
+};
+
+static void mxl5007t_set_bw_bits(struct mxl5007t_state *state,
+                                 enum mxl5007t_bw_mhz bw)
+{
+        u8 val;
+
+        switch (bw) {
+        case MxL_BW_6MHz:
+                val = 0x15; /* set DIG_MODEINDEX, DIG_MODEINDEX_A,
+                             * and DIG_MODEINDEX_CSF */
+                break;
+        case MxL_BW_7MHz:
+                val = 0x21;
+                break;
+        case MxL_BW_8MHz:
+                val = 0x3f;
+                break;
+        default:
+                mxl_fail(-EINVAL);
+                return;
+        }
+        set_reg_bits(state->tab_rftune, 0x13, 0x3f, val);
+
+        return;
+}
+
+static struct
+reg_pair_t *mxl5007t_calc_rf_tune_regs(struct mxl5007t_state *state,
+                                       u32 rf_freq, enum mxl5007t_bw_mhz bw)
+{
+        u32 dig_rf_freq = 0;
+        u32 temp;
+        u32 frac_divider = 1000000;
+        unsigned int i;
+
+        memcpy(&state->tab_rftune, &reg_pair_rftune, sizeof(reg_pair_rftune));
+
+        mxl5007t_set_bw_bits(state, bw);
+
+        /* Convert RF frequency into 16 bits =>
+         * 10 bit integer (MHz) + 6 bit fraction */
+        dig_rf_freq = rf_freq / MHz;
+
+        temp = rf_freq % MHz;
+
+        for (i = 0; i < 6; i++) {
+                dig_rf_freq <<= 1;
+                frac_divider /= 2;
+                if (temp > frac_divider) {
+                        temp -= frac_divider;
+                        dig_rf_freq++;
+                }
+        }
+
+        /* add to have shift center point by 7.8124 kHz */
+        if (temp > 7812)
+                dig_rf_freq++;
+
+        set_reg_bits(state->tab_rftune, 0x14, 0xff, (u8)dig_rf_freq);
+        set_reg_bits(state->tab_rftune, 0x15, 0xff, (u8)(dig_rf_freq >> 8));
+
+        return state->tab_rftune;
+}
+
+/* ------------------------------------------------------------------------- */
+
+static int mxl5007t_write_reg(struct mxl5007t_state *state, u8 reg, u8 val)
+{
+        u8 buf[] = { reg, val };
+        struct i2c_msg msg = { .addr = state->i2c_props.addr, .flags = 0,
+                               .buf = buf, .len = 2 };
+        int ret;
+
+        ret = i2c_transfer(state->i2c_props.adap, &msg, 1);
+        if (ret != 1) {
+                mxl_err("failed!");
+                return -EREMOTEIO;
+        }
+        return 0;
+}
+
+static int mxl5007t_write_regs(struct mxl5007t_state *state,
+                               struct reg_pair_t *reg_pair)
+{
+        unsigned int i = 0;
+        int ret = 0;
+
+        while ((ret == 0) && (reg_pair[i].reg || reg_pair[i].val)) {
+                ret = mxl5007t_write_reg(state,
+                                         reg_pair[i].reg, reg_pair[i].val);
+                i++;
+        }
+        return ret;
+}
+
+static int mxl5007t_read_reg(struct mxl5007t_state *state, u8 reg, u8 *val)
+{
+        struct i2c_msg msg[] = {
+                { .addr = state->i2c_props.addr, .flags = 0,
+                  .buf = &reg, .len = 1 },
+                { .addr = state->i2c_props.addr, .flags = I2C_M_RD,
+                  .buf = val, .len = 1 },
+        };
+        int ret;
+
+        ret = i2c_transfer(state->i2c_props.adap, msg, 2);
+        if (ret != 2) {
+                mxl_err("failed!");
+                return -EREMOTEIO;
+        }
+        return 0;
+}
+
+static int mxl5007t_soft_reset(struct mxl5007t_state *state)
+{
+        u8 d = 0xff;
+        struct i2c_msg msg = { .addr = state->i2c_props.addr, .flags = 0,
+                               .buf = &d, .len = 1 };
+
+        int ret = i2c_transfer(state->i2c_props.adap, &msg, 1);
+
+        if (ret != 1) {
+                mxl_err("failed!");
+                return -EREMOTEIO;
+        }
+        return 0;
+}
+
+static int mxl5007t_tuner_init(struct mxl5007t_state *state,
+                               enum mxl5007t_mode mode)
+{
+        struct reg_pair_t *init_regs;
+        int ret;
+
+        ret = mxl5007t_soft_reset(state);
+        if (mxl_fail(ret))
+                goto fail;
+
+        /* calculate initialization reg array */
+        init_regs = mxl5007t_calc_init_regs(state, mode);
+
+        ret = mxl5007t_write_regs(state, init_regs);
+        if (mxl_fail(ret))
+                goto fail;
+        mdelay(1);
+
+        ret = mxl5007t_write_reg(state, 0x2c, 0x35);
+        mxl_fail(ret);
+fail:
+        return ret;
+}
+
+static int mxl5007t_tuner_rf_tune(struct mxl5007t_state *state, u32 rf_freq_hz,
+                                  enum mxl5007t_bw_mhz bw)
+{
+        struct reg_pair_t *rf_tune_regs;
+        int ret;
+
+        /* calculate channel change reg array */
+        rf_tune_regs = mxl5007t_calc_rf_tune_regs(state, rf_freq_hz, bw);
+
+        ret = mxl5007t_write_regs(state, rf_tune_regs);
+        if (mxl_fail(ret))
+                goto fail;
+        msleep(3);
+fail:
+        return ret;
+}
+
+/* ------------------------------------------------------------------------- */
+
+static int mxl5007t_synth_lock_status(struct mxl5007t_state *state,
+                                      int *rf_locked, int *ref_locked)
+{
+        u8 d;
+        int ret;
+
+        *rf_locked = 0;
+        *ref_locked = 0;
+
+        ret = mxl5007t_read_reg(state, 0xcf, &d);
+        if (mxl_fail(ret))
+                goto fail;
+
+        if ((d & 0x0c) == 0x0c)
+                *rf_locked = 1;
+
+        if ((d & 0x03) == 0x03)
+                *ref_locked = 1;
+fail:
+        return ret;
+}
+
+static int mxl5007t_check_rf_input_power(struct mxl5007t_state *state,
+                                         s32 *rf_input_level)
+{
+        u8 d1, d2;
+        int ret;
+
+        ret = mxl5007t_read_reg(state, 0xb7, &d1);
+        if (mxl_fail(ret))
+                goto fail;
+
+        ret = mxl5007t_read_reg(state, 0xbf, &d2);
+        if (mxl_fail(ret))
+                goto fail;
+
+        d2 = d2 >> 4;
+        if (d2 > 7)
+                d2 += 0xf0;
+
+        *rf_input_level = (s32)(d1 + d2 - 113);
+fail:
+        return ret;
+}
+
+/* ------------------------------------------------------------------------- */
+
+static int mxl5007t_get_status(struct dvb_frontend *fe, u32 *status)
+{
+        struct mxl5007t_state *state = fe->tuner_priv;
+        int rf_locked, ref_locked;
+        s32 rf_input_level;
+        int ret;
+
+        if (fe->ops.i2c_gate_ctrl)
+                fe->ops.i2c_gate_ctrl(fe, 1);
+
+        ret = mxl5007t_synth_lock_status(state, &rf_locked, &ref_locked);
+        if (mxl_fail(ret))
+                goto fail;
+        mxl_debug("%s%s", rf_locked ? "rf locked " : "",
+                  ref_locked ? "ref locked" : "");
+
+        ret = mxl5007t_check_rf_input_power(state, &rf_input_level);
+        if (mxl_fail(ret))
+                goto fail;
+        mxl_debug("rf input power: %d", rf_input_level);
+fail:
+        if (fe->ops.i2c_gate_ctrl)
+                fe->ops.i2c_gate_ctrl(fe, 0);
+
+        return ret;
+}
+
+/* ------------------------------------------------------------------------- */
+
+static int mxl5007t_set_params(struct dvb_frontend *fe,
+                               struct dvb_frontend_parameters *params)
+{
+        struct mxl5007t_state *state = fe->tuner_priv;
+        enum mxl5007t_bw_mhz bw;
+        enum mxl5007t_mode mode;
+        int ret;
+        u32 freq = params->frequency;
+
+        if (fe->ops.info.type == FE_ATSC) {
+                switch (params->u.vsb.modulation) {
+                case VSB_8:
+                case VSB_16:
+                        mode = MxL_MODE_OTA_DVBT_ATSC;
+                        break;
+                case QAM_64:
+                case QAM_256:
+                        mode = MxL_MODE_CABLE_DIGITAL;
+                        break;
+                default:
+                        mxl_err("modulation not set!");
+                        return -EINVAL;
+                }
+                bw = MxL_BW_6MHz;
+        } else if (fe->ops.info.type == FE_OFDM) {
+                switch (params->u.ofdm.bandwidth) {
+                case BANDWIDTH_6_MHZ:
+                        bw = MxL_BW_6MHz;
+                        break;
+                case BANDWIDTH_7_MHZ:
+                        bw = MxL_BW_7MHz;
+                        break;
+                case BANDWIDTH_8_MHZ:
+                        bw = MxL_BW_8MHz;
+                        break;
+                default:
+                        mxl_err("bandwidth not set!");
+                        return -EINVAL;
+                }
+                mode = MxL_MODE_OTA_DVBT_ATSC;
+        } else {
+                mxl_err("modulation type not supported!");
+                return -EINVAL;
+        }
+
+        if (fe->ops.i2c_gate_ctrl)
+                fe->ops.i2c_gate_ctrl(fe, 1);
+
+        mutex_lock(&state->lock);
+
+        ret = mxl5007t_tuner_init(state, mode);
+        if (mxl_fail(ret))
+                goto fail;
+
+        ret = mxl5007t_tuner_rf_tune(state, freq, bw);
+        if (mxl_fail(ret))
+                goto fail;
+
+        state->frequency = freq;
+        state->bandwidth = (fe->ops.info.type == FE_OFDM) ?
+                params->u.ofdm.bandwidth : 0;
+fail:
+        mutex_unlock(&state->lock);
+
+        if (fe->ops.i2c_gate_ctrl)
+                fe->ops.i2c_gate_ctrl(fe, 0);
+
+        return ret;
+}
+
+static int mxl5007t_set_analog_params(struct dvb_frontend *fe,
+                                      struct analog_parameters *params)
+{
+        struct mxl5007t_state *state = fe->tuner_priv;
+        enum mxl5007t_bw_mhz bw = 0; /* FIXME */
+        enum mxl5007t_mode cbl_mode;
+        enum mxl5007t_mode ota_mode;
+        char *mode_name;
+        int ret;
+        u32 freq = params->frequency * 62500;
+
+#define cable 1
+        if (params->std & V4L2_STD_MN) {
+                cbl_mode = MxL_MODE_CABLE_NTSC_PAL_GH;
+                ota_mode = MxL_MODE_OTA_NTSC_PAL_GH;
+                mode_name = "MN";
+        } else if (params->std & V4L2_STD_B) {
+                cbl_mode = MxL_MODE_CABLE_PAL_IB;
+                ota_mode = MxL_MODE_OTA_PAL_IB;
+                mode_name = "B";
+        } else if (params->std & V4L2_STD_GH) {
+                cbl_mode = MxL_MODE_CABLE_NTSC_PAL_GH;
+                ota_mode = MxL_MODE_OTA_NTSC_PAL_GH;
+                mode_name = "GH";
+        } else if (params->std & V4L2_STD_PAL_I) {
+                cbl_mode = MxL_MODE_CABLE_PAL_IB;
+                ota_mode = MxL_MODE_OTA_PAL_IB;
+                mode_name = "I";
+        } else if (params->std & V4L2_STD_DK) {
+                cbl_mode = MxL_MODE_CABLE_PAL_D_SECAM_KL;
+                ota_mode = MxL_MODE_OTA_PAL_D_SECAM_KL;
+                mode_name = "DK";
+        } else if (params->std & V4L2_STD_SECAM_L) {
+                cbl_mode = MxL_MODE_CABLE_PAL_D_SECAM_KL;
+                ota_mode = MxL_MODE_OTA_PAL_D_SECAM_KL;
+                mode_name = "L";
+        } else if (params->std & V4L2_STD_SECAM_LC) {
+                cbl_mode = MxL_MODE_CABLE_PAL_D_SECAM_KL;
+                ota_mode = MxL_MODE_OTA_PAL_D_SECAM_KL;
+                mode_name = "L'";
+        } else {
+                mode_name = "xx";
+                /* FIXME */
+                cbl_mode = MxL_MODE_CABLE_NTSC_PAL_GH;
+                ota_mode = MxL_MODE_OTA_NTSC_PAL_GH;
+        }
+        mxl_debug("setting mxl5007 to system %s", mode_name);
+
+        if (fe->ops.i2c_gate_ctrl)
+                fe->ops.i2c_gate_ctrl(fe, 1);
+
+        mutex_lock(&state->lock);
+
+        ret = mxl5007t_tuner_init(state, cable ? cbl_mode : ota_mode);
+        if (mxl_fail(ret))
+                goto fail;
+
+        ret = mxl5007t_tuner_rf_tune(state, freq, bw);
+        if (mxl_fail(ret))
+                goto fail;
+
+        state->frequency = freq;
+        state->bandwidth = 0;
+fail:
+        mutex_unlock(&state->lock);
+
+        if (fe->ops.i2c_gate_ctrl)
+                fe->ops.i2c_gate_ctrl(fe, 0);
+
+        return ret;
+}
+
+/* ------------------------------------------------------------------------- */
+
+static int mxl5007t_init(struct dvb_frontend *fe)
+{
+        struct mxl5007t_state *state = fe->tuner_priv;
+        int ret;
+        u8 d;
+
+        if (fe->ops.i2c_gate_ctrl)
+                fe->ops.i2c_gate_ctrl(fe, 1);
+
+        ret = mxl5007t_read_reg(state, 0x05, &d);
+        if (mxl_fail(ret))
+                goto fail;
+
+        ret = mxl5007t_write_reg(state, 0x05, d | 0x01);
+        mxl_fail(ret);
+fail:
+        if (fe->ops.i2c_gate_ctrl)
+                fe->ops.i2c_gate_ctrl(fe, 0);
+
+        return ret;
+}
+
+static int mxl5007t_sleep(struct dvb_frontend *fe)
+{
+        struct mxl5007t_state *state = fe->tuner_priv;
+        int ret;
+        u8 d;
+
+        if (fe->ops.i2c_gate_ctrl)
+                fe->ops.i2c_gate_ctrl(fe, 1);
+
+        ret = mxl5007t_read_reg(state, 0x05, &d);
+        if (mxl_fail(ret))
+                goto fail;
+
+        ret = mxl5007t_write_reg(state, 0x05, d & ~0x01);
+        mxl_fail(ret);
+fail:
+        if (fe->ops.i2c_gate_ctrl)
+                fe->ops.i2c_gate_ctrl(fe, 0);
+
+        return ret;
+}
+
+/* ------------------------------------------------------------------------- */
+
+static int mxl5007t_get_frequency(struct dvb_frontend *fe, u32 *frequency)
+{
+        struct mxl5007t_state *state = fe->tuner_priv;
+        *frequency = state->frequency;
+        return 0;
+}
+
+static int mxl5007t_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth)
+{
+        struct mxl5007t_state *state = fe->tuner_priv;
+        *bandwidth = state->bandwidth;
+        return 0;
+}
+
+static int mxl5007t_release(struct dvb_frontend *fe)
+{
+        struct mxl5007t_state *state = fe->tuner_priv;
+
+        mutex_lock(&mxl5007t_list_mutex);
+
+        if (state)
+                hybrid_tuner_release_state(state);
+
+        mutex_unlock(&mxl5007t_list_mutex);
+
+        fe->tuner_priv = NULL;
+
+        return 0;
+}
+
+/* ------------------------------------------------------------------------- */
+
+static struct dvb_tuner_ops mxl5007t_tuner_ops = {
+        .info = {
+                .name = "MaxLinear MxL5007T",
+        },
+        .init              = mxl5007t_init,
+        .sleep             = mxl5007t_sleep,
+        .set_params        = mxl5007t_set_params,
+        .set_analog_params = mxl5007t_set_analog_params,
+        .get_status        = mxl5007t_get_status,
+        .get_frequency     = mxl5007t_get_frequency,
+        .get_bandwidth     = mxl5007t_get_bandwidth,
+        .release           = mxl5007t_release,
+};
+
+static int mxl5007t_get_chip_id(struct mxl5007t_state *state)
+{
+        char *name;
+        int ret;
+        u8 id;
+
+        ret = mxl5007t_read_reg(state, 0xd3, &id);
+        if (mxl_fail(ret))
+                goto fail;
+
+        switch (id) {
+        case MxL_5007_V1_F1:
+                name = "MxL5007.v1.f1";
+                break;
+        case MxL_5007_V1_F2:
+                name = "MxL5007.v1.f2";
+                break;
+        case MxL_5007_V2_100_F1:
+                name = "MxL5007.v2.100.f1";
+                break;
+        case MxL_5007_V2_100_F2:
+                name = "MxL5007.v2.100.f2";
+                break;
+        case MxL_5007_V2_200_F1:
+                name = "MxL5007.v2.200.f1";
+                break;
+        case MxL_5007_V2_200_F2:
+                name = "MxL5007.v2.200.f2";
+                break;
+        default:
+                name = "MxL5007T";
+                id = MxL_UNKNOWN_ID;
+        }
+        state->chip_id = id;
+        mxl_info("%s detected @ %d-%04x", name,
+                 i2c_adapter_id(state->i2c_props.adap),
+                 state->i2c_props.addr);
+        return 0;
+fail:
+        mxl_warn("unable to identify device @ %d-%04x",
+                 i2c_adapter_id(state->i2c_props.adap),
+                 state->i2c_props.addr);
+
+        state->chip_id = MxL_UNKNOWN_ID;
+        return ret;
+}
+
+struct dvb_frontend *mxl5007t_attach(struct dvb_frontend *fe,
+                                     struct i2c_adapter *i2c, u8 addr,
+                                     struct mxl5007t_config *cfg)
+{
+        struct mxl5007t_state *state = NULL;
+        int instance, ret;
+
+        mutex_lock(&mxl5007t_list_mutex);
+        instance = hybrid_tuner_request_state(struct mxl5007t_state, state,
+                                              hybrid_tuner_instance_list,
+                                              i2c, addr, "mxl5007");
+        switch (instance) {
+        case 0:
+                goto fail;
+                break;
+        case 1:
+                /* new tuner instance */
+                state->config = cfg;
+
+                mutex_init(&state->lock);
+
+                if (fe->ops.i2c_gate_ctrl)
+                        fe->ops.i2c_gate_ctrl(fe, 1);
+
+                ret = mxl5007t_get_chip_id(state);
+
+                if (fe->ops.i2c_gate_ctrl)
+                        fe->ops.i2c_gate_ctrl(fe, 0);
+
+                /* check return value of mxl5007t_get_chip_id */
+                if (mxl_fail(ret))
+                        goto fail;
+                break;
+        default:
+                /* existing tuner instance */
+                break;
+        }
+        fe->tuner_priv = state;
+        mutex_unlock(&mxl5007t_list_mutex);
+
+        memcpy(&fe->ops.tuner_ops, &mxl5007t_tuner_ops,
+               sizeof(struct dvb_tuner_ops));
+
+        return fe;
+fail:
+        mutex_unlock(&mxl5007t_list_mutex);
+
+        mxl5007t_release(fe);
+        return NULL;
+}
+EXPORT_SYMBOL_GPL(mxl5007t_attach);
+MODULE_DESCRIPTION("MaxLinear MxL5007T Silicon IC tuner driver");
+MODULE_AUTHOR("Michael Krufky <mkrufky@linuxtv.org>");
+MODULE_LICENSE("GPL");
+MODULE_VERSION("0.1");
+
+/*
+ * Overrides for Emacs so that we follow Linus's tabbing style.
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
diff --git a/drivers/media/common/tuners/mxl5007t.h b/drivers/media/common/tuners/mxl5007t.h
new file mode 100644
index 000000000000..aa3eea0b5262
--- /dev/null
+++ b/drivers/media/common/tuners/mxl5007t.h
@@ -0,0 +1,104 @@
+/*
+ *  mxl5007t.h - driver for the MaxLinear MxL5007T silicon tuner
+ *
+ *  Copyright (C) 2008 Michael Krufky <mkrufky@linuxtv.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __MXL5007T_H__
+#define __MXL5007T_H__
+
+#include "dvb_frontend.h"
+
+/* ------------------------------------------------------------------------- */
+
+enum mxl5007t_if_freq {
+        MxL_IF_4_MHZ,      /*  4000000 */
+        MxL_IF_4_5_MHZ,    /*  4500000 */
+        MxL_IF_4_57_MHZ,   /*  4570000 */
+        MxL_IF_5_MHZ,      /*  5000000 */
+        MxL_IF_5_38_MHZ,   /*  5380000 */
+        MxL_IF_6_MHZ,      /*  6000000 */
+        MxL_IF_6_28_MHZ,   /*  6280000 */
+        MxL_IF_9_1915_MHZ, /*  9191500 */
+        MxL_IF_35_25_MHZ,  /* 35250000 */
+        MxL_IF_36_15_MHZ,  /* 36150000 */
+        MxL_IF_44_MHZ,     /* 44000000 */
+};
+
+enum mxl5007t_xtal_freq {
+        MxL_XTAL_16_MHZ,      /* 16000000 */
+        MxL_XTAL_20_MHZ,      /* 20000000 */
+        MxL_XTAL_20_25_MHZ,   /* 20250000 */
+        MxL_XTAL_20_48_MHZ,   /* 20480000 */
+        MxL_XTAL_24_MHZ,      /* 24000000 */
+        MxL_XTAL_25_MHZ,      /* 25000000 */
+        MxL_XTAL_25_14_MHZ,   /* 25140000 */
+        MxL_XTAL_27_MHZ,      /* 27000000 */
+        MxL_XTAL_28_8_MHZ,    /* 28800000 */
+        MxL_XTAL_32_MHZ,      /* 32000000 */
+        MxL_XTAL_40_MHZ,      /* 40000000 */
+        MxL_XTAL_44_MHZ,      /* 44000000 */
+        MxL_XTAL_48_MHZ,      /* 48000000 */
+        MxL_XTAL_49_3811_MHZ, /* 49381100 */
+};
+
+enum mxl5007t_clkout_amp {
+        MxL_CLKOUT_AMP_0_94V = 0,
+        MxL_CLKOUT_AMP_0_53V = 1,
+        MxL_CLKOUT_AMP_0_37V = 2,
+        MxL_CLKOUT_AMP_0_28V = 3,
+        MxL_CLKOUT_AMP_0_23V = 4,
+        MxL_CLKOUT_AMP_0_20V = 5,
+        MxL_CLKOUT_AMP_0_17V = 6,
+        MxL_CLKOUT_AMP_0_15V = 7,
+};
+
+struct mxl5007t_config {
+        s32 if_diff_out_level;
+        enum mxl5007t_clkout_amp clk_out_amp;
+        enum mxl5007t_xtal_freq xtal_freq_hz;
+        enum mxl5007t_if_freq if_freq_hz;
+        unsigned int invert_if:1;
+        unsigned int loop_thru_enable:1;
+        unsigned int clk_out_enable:1;
+};
+
+#if defined(CONFIG_MEDIA_TUNER_MXL5007T) || (defined(CONFIG_MEDIA_TUNER_MXL5007T_MODULE) && defined(MODULE))
+extern struct dvb_frontend *mxl5007t_attach(struct dvb_frontend *fe,
+                                            struct i2c_adapter *i2c, u8 addr,
+                                            struct mxl5007t_config *cfg);
+#else
+static inline struct dvb_frontend *mxl5007t_attach(struct dvb_frontend *fe,
+                                                   struct i2c_adapter *i2c,
+                                                   u8 addr,
+                                                   struct mxl5007t_config *cfg)
+{
+        printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+        return NULL;
+}
+#endif
+
+#endif /* __MXL5007T_H__ */
+
+/*
+ * Overrides for Emacs so that we follow Linus's tabbing style.
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
+
diff --git a/drivers/media/common/tuners/tda9887.c b/drivers/media/common/tuners/tda9887.c
index a0545ba957b0..72abf0b73486 100644
--- a/drivers/media/common/tuners/tda9887.c
+++ b/drivers/media/common/tuners/tda9887.c
@@ -6,7 +6,7 @@
 #include <linux/errno.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
-#include <linux/videodev.h>
+#include <linux/videodev2.h>
 #include <media/v4l2-common.h>
 #include <media/tuner.h>
 #include "tuner-i2c.h"
diff --git a/drivers/media/common/tuners/tuner-simple.c b/drivers/media/common/tuners/tuner-simple.c
index 266c255cf0d8..597e47f5d69c 100644
--- a/drivers/media/common/tuners/tuner-simple.c
+++ b/drivers/media/common/tuners/tuner-simple.c
@@ -6,7 +6,7 @@
  */
 #include <linux/delay.h>
 #include <linux/i2c.h>
-#include <linux/videodev.h>
+#include <linux/videodev2.h>
 #include <media/tuner.h>
 #include <media/v4l2-common.h>
 #include <media/tuner-types.h>
diff --git a/drivers/media/dvb/bt8xx/Kconfig b/drivers/media/dvb/bt8xx/Kconfig
index 7588db1319d0..7e9c090fc04e 100644
--- a/drivers/media/dvb/bt8xx/Kconfig
+++ b/drivers/media/dvb/bt8xx/Kconfig
@@ -1,7 +1,6 @@
 config DVB_BT8XX
         tristate "BT8xx based PCI cards"
         depends on DVB_CORE && PCI && I2C && VIDEO_BT848
-        depends on HOTPLUG      # due to FW_LOADER
         select DVB_MT352 if !DVB_FE_CUSTOMISE
         select DVB_SP887X if !DVB_FE_CUSTOMISE
         select DVB_NXT6000 if !DVB_FE_CUSTOMISE
@@ -10,7 +9,6 @@ config DVB_BT8XX
         select DVB_LGDT330X if !DVB_FE_CUSTOMISE
         select DVB_ZL10353 if !DVB_FE_CUSTOMISE
         select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE
-        select FW_LOADER
         help
           Support for PCI cards based on the Bt8xx PCI bridge. Examples are
           the Nebula cards, the Pinnacle PCTV cards, the Twinhan DST cards,
diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig
index a577c0f89f67..e84152b7576d 100644
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ b/drivers/media/dvb/dvb-usb/Kconfig
@@ -1,8 +1,6 @@
 config DVB_USB
         tristate "Support for various USB DVB devices"
         depends on DVB_CORE && USB && I2C && INPUT
-        depends on HOTPLUG      # due to FW_LOADER
-        select FW_LOADER
         help
           By enabling this you will be able to choose the various supported
           USB1.1 and USB2.0 DVB devices.
@@ -246,6 +244,14 @@ config DVB_USB_AF9005_REMOTE
           Say Y here to support the default remote control decoding for the
           Afatech AF9005 based receiver.
 
+config DVB_USB_DW2102
+        tristate "DvbWorld 2102 DVB-S USB2.0 receiver"
+        depends on DVB_USB
+        select DVB_STV0299 if !DVB_FE_CUSTOMISE
+        select DVB_PLL if !DVB_FE_CUSTOMISE
+        help
+           Say Y here to support the DvbWorld 2102 DVB-S USB2.0 receiver.
+
 config DVB_USB_ANYSEE
         tristate "Anysee DVB-T/C USB2.0 support"
         depends on DVB_USB
diff --git a/drivers/media/dvb/dvb-usb/Makefile b/drivers/media/dvb/dvb-usb/Makefile
index 44c11e45e564..e206f1ea0027 100644
--- a/drivers/media/dvb/dvb-usb/Makefile
+++ b/drivers/media/dvb/dvb-usb/Makefile
@@ -64,6 +64,9 @@ obj-$(CONFIG_DVB_USB_AF9005_REMOTE) += dvb-usb-af9005-remote.o
 dvb-usb-anysee-objs = anysee.o
 obj-$(CONFIG_DVB_USB_ANYSEE) += dvb-usb-anysee.o
 
+dvb-usb-dw2102-objs = dw2102.o
+obj-$(CONFIG_DVB_USB_DW2102) += dvb-usb-dw2102.o
+
 EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/
 # due to tuner-xc3028
 EXTRA_CFLAGS += -Idrivers/media/common/tuners
diff --git a/drivers/media/dvb/dvb-usb/anysee.c b/drivers/media/dvb/dvb-usb/anysee.c
index adfd4fc82efd..2f408d2e1ef3 100644
--- a/drivers/media/dvb/dvb-usb/anysee.c
+++ b/drivers/media/dvb/dvb-usb/anysee.c
@@ -43,7 +43,7 @@ module_param_named(debug, dvb_usb_anysee_debug, int, 0644);
 MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS);
 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
 
-struct mutex anysee_usb_mutex;
+static struct mutex anysee_usb_mutex;
 
 static int anysee_ctrl_msg(struct dvb_usb_device *d, u8 *sbuf, u8 slen,
         u8 *rbuf, u8 rlen)
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
index e5238b31e946..029b437caf9a 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
@@ -204,5 +204,6 @@
 #define USB_PID_ASUS_U3000                              0x171f
 #define USB_PID_ASUS_U3100                              0x173f
 #define USB_PID_YUAN_EC372S                             0x1edc
+#define USB_PID_DW2102                                  0x2102
 
 #endif
diff --git a/drivers/media/dvb/dvb-usb/dw2102.c b/drivers/media/dvb/dvb-usb/dw2102.c
new file mode 100644
index 000000000000..a4d898b44e55
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb/dw2102.c
@@ -0,0 +1,425 @@
+/* DVB USB framework compliant Linux driver for the DVBWorld DVB-S 2102 Card
+*
+* Copyright (C) 2008 Igor M. Liplianin (liplianin@me.by)
+*
+*       This program is free software; you can redistribute it and/or modify it
+*       under the terms of the GNU General Public License as published by the
+*       Free Software Foundation, version 2.
+*
+* see Documentation/dvb/README.dvb-usb for more information
+*/
+#include <linux/version.h>
+#include "dw2102.h"
+#include "stv0299.h"
+#include "z0194a.h"
+
+#ifndef USB_PID_DW2102
+#define USB_PID_DW2102 0x2102
+#endif
+
+#define DW2102_READ_MSG 0
+#define DW2102_WRITE_MSG 1
+
+#define REG_1F_SYMBOLRATE_BYTE0 0x1f
+#define REG_20_SYMBOLRATE_BYTE1 0x20
+#define REG_21_SYMBOLRATE_BYTE2 0x21
+
+#define DW2102_VOLTAGE_CTRL (0x1800)
+#define DW2102_RC_QUERY (0x1a00)
+
+struct dw2102_state {
+        u32 last_key_pressed;
+};
+struct dw2102_rc_keys {
+        u32 keycode;
+        u32 event;
+};
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+static int dw2102_op_rw(struct usb_device *dev, u8 request, u16 value,
+                u8 *data, u16 len, int flags)
+{
+        int ret;
+        u8 u8buf[len];
+
+        unsigned int pipe = (flags == DW2102_READ_MSG) ?
+                usb_rcvctrlpipe(dev, 0) : usb_sndctrlpipe(dev, 0);
+        u8 request_type = (flags == DW2102_READ_MSG) ? USB_DIR_IN : USB_DIR_OUT;
+
+        if (flags == DW2102_WRITE_MSG)
+                memcpy(u8buf, data, len);
+        ret = usb_control_msg(dev, pipe, request,
+                request_type | USB_TYPE_VENDOR, value, 0 , u8buf, len, 2000);
+
+        if (flags == DW2102_READ_MSG)
+                memcpy(data, u8buf, len);
+        return ret;
+}
+
+/* I2C */
+
+static int dw2102_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[],
+                int num)
+{
+struct dvb_usb_device *d = i2c_get_adapdata(adap);
+        int i = 0, ret = 0;
+        u8 buf6[] = {0x2c, 0x05, 0xc0, 0, 0, 0, 0};
+        u8 request;
+        u16 value;
+
+        if (!d)
+                return -ENODEV;
+        if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
+                return -EAGAIN;
+
+        switch (num) {
+        case 2:
+                /* read stv0299 register */
+                request = 0xb5;
+                value = msg[0].buf[0];/* register */
+                for (i = 0; i < msg[1].len; i++) {
+                        value = value + i;
+                        ret = dw2102_op_rw(d->udev, 0xb5,
+                                value, buf6, 2, DW2102_READ_MSG);
+                        msg[1].buf[i] = buf6[0];
+
+                }
+                break;
+        case 1:
+                switch (msg[0].addr) {
+                case 0x68:
+                        /* write to stv0299 register */
+                        buf6[0] = 0x2a;
+                        buf6[1] = msg[0].buf[0];
+                        buf6[2] = msg[0].buf[1];
+                        ret = dw2102_op_rw(d->udev, 0xb2,
+                                0, buf6, 3, DW2102_WRITE_MSG);
+                        break;
+                case 0x60:
+                        if (msg[0].flags == 0) {
+                        /* write to tuner pll */
+                                buf6[0] = 0x2c;
+                                buf6[1] = 5;
+                                buf6[2] = 0xc0;
+                                buf6[3] = msg[0].buf[0];
+                                buf6[4] = msg[0].buf[1];
+                                buf6[5] = msg[0].buf[2];
+                                buf6[6] = msg[0].buf[3];
+                                ret = dw2102_op_rw(d->udev, 0xb2,
+                                0, buf6, 7, DW2102_WRITE_MSG);
+                        } else {
+                        /* write to tuner pll */
+                                ret = dw2102_op_rw(d->udev, 0xb5,
+                                0, buf6, 1, DW2102_READ_MSG);
+                                msg[0].buf[0] = buf6[0];
+                        }
+                        break;
+                case (DW2102_RC_QUERY):
+                        ret  = dw2102_op_rw(d->udev, 0xb8,
+                                0, buf6, 2, DW2102_READ_MSG);
+                        msg[0].buf[0] = buf6[0];
+                        msg[0].buf[1] = buf6[1];
+                        break;
+                case (DW2102_VOLTAGE_CTRL):
+                        buf6[0] = 0x30;
+                        buf6[1] = msg[0].buf[0];
+                        ret = dw2102_op_rw(d->udev, 0xb2,
+                                0, buf6, 2, DW2102_WRITE_MSG);
+                        break;
+                }
+
+                break;
+        }
+
+        mutex_unlock(&d->i2c_mutex);
+        return num;
+}
+
+static u32 dw2102_i2c_func(struct i2c_adapter *adapter)
+{
+        return I2C_FUNC_I2C;
+}
+
+static struct i2c_algorithm dw2102_i2c_algo = {
+        .master_xfer = dw2102_i2c_transfer,
+        .functionality = dw2102_i2c_func,
+};
+
+static int dw2102_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
+{
+        static u8 command_13v[1] = {0x00};
+        static u8 command_18v[1] = {0x01};
+        struct i2c_msg msg[] = {
+                {.addr = DW2102_VOLTAGE_CTRL, .flags = 0,
+                        .buf = command_13v, .len = 1},
+        };
+
+        struct dvb_usb_adapter *udev_adap =
+                (struct dvb_usb_adapter *)(fe->dvb->priv);
+        if (voltage == SEC_VOLTAGE_18)
+                msg[0].buf = command_18v;
+        i2c_transfer(&udev_adap->dev->i2c_adap, msg, 1);
+        return 0;
+}
+
+static int dw2102_frontend_attach(struct dvb_usb_adapter *d)
+{
+        d->fe = dvb_attach(stv0299_attach, &sharp_z0194a_config,
+                &d->dev->i2c_adap);
+        if (d->fe != NULL) {
+                d->fe->ops.set_voltage = dw2102_set_voltage;
+                info("Attached stv0299!\n");
+                return 0;
+        }
+        return -EIO;
+}
+
+static int dw2102_tuner_attach(struct dvb_usb_adapter *adap)
+{
+        dvb_attach(dvb_pll_attach, adap->fe, 0x60,
+                &adap->dev->i2c_adap, DVB_PLL_OPERA1);
+        return 0;
+}
+
+static struct dvb_usb_rc_key dw2102_rc_keys[] = {
+        { 0xf8, 0x0a, KEY_Q },          /*power*/
+        { 0xf8, 0x0c, KEY_M },          /*mute*/
+        { 0xf8, 0x11, KEY_1 },
+        { 0xf8, 0x12, KEY_2 },
+        { 0xf8, 0x13, KEY_3 },
+        { 0xf8, 0x14, KEY_4 },
+        { 0xf8, 0x15, KEY_5 },
+        { 0xf8, 0x16, KEY_6 },
+        { 0xf8, 0x17, KEY_7 },
+        { 0xf8, 0x18, KEY_8 },
+        { 0xf8, 0x19, KEY_9 },
+        { 0xf8, 0x10, KEY_0 },
+        { 0xf8, 0x1c, KEY_PAGEUP },     /*ch+*/
+        { 0xf8, 0x0f, KEY_PAGEDOWN },   /*ch-*/
+        { 0xf8, 0x1a, KEY_O },          /*vol+*/
+        { 0xf8, 0x0e, KEY_Z },          /*vol-*/
+        { 0xf8, 0x04, KEY_R },          /*rec*/
+        { 0xf8, 0x09, KEY_D },          /*fav*/
+        { 0xf8, 0x08, KEY_BACKSPACE },  /*rewind*/
+        { 0xf8, 0x07, KEY_A },          /*fast*/
+        { 0xf8, 0x0b, KEY_P },          /*pause*/
+        { 0xf8, 0x02, KEY_ESC },        /*cancel*/
+        { 0xf8, 0x03, KEY_G },          /*tab*/
+        { 0xf8, 0x00, KEY_UP },         /*up*/
+        { 0xf8, 0x1f, KEY_ENTER },      /*ok*/
+        { 0xf8, 0x01, KEY_DOWN },       /*down*/
+        { 0xf8, 0x05, KEY_C },          /*cap*/
+        { 0xf8, 0x06, KEY_S },          /*stop*/
+        { 0xf8, 0x40, KEY_F },          /*full*/
+        { 0xf8, 0x1e, KEY_W },          /*tvmode*/
+        { 0xf8, 0x1b, KEY_B },          /*recall*/
+
+};
+
+
+
+static int dw2102_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
+{
+        struct dw2102_state *st = d->priv;
+        u8 key[2];
+        struct i2c_msg msg[] = {
+                {.addr = DW2102_RC_QUERY, .flags = I2C_M_RD, .buf = key,
+                .len = 2},
+        };
+        int i;
+
+        *state = REMOTE_NO_KEY_PRESSED;
+        if (dw2102_i2c_transfer(&d->i2c_adap, msg, 1) == 1) {
+                for (i = 0; i < ARRAY_SIZE(dw2102_rc_keys); i++) {
+                        if (dw2102_rc_keys[i].data == msg[0].buf[0]) {
+                                *state = REMOTE_KEY_PRESSED;
+                                *event = dw2102_rc_keys[i].event;
+                                st->last_key_pressed =
+                                        dw2102_rc_keys[i].event;
+                                break;
+                        }
+                st->last_key_pressed = 0;
+                }
+        }
+        /* info("key: %x %x\n",key[0],key[1]); */
+        return 0;
+}
+
+static struct usb_device_id dw2102_table[] = {
+        {USB_DEVICE(USB_VID_CYPRESS, USB_PID_DW2102)},
+        {USB_DEVICE(USB_VID_CYPRESS, 0x2101)},
+        { }
+};
+
+MODULE_DEVICE_TABLE(usb, dw2102_table);
+
+static int dw2102_load_firmware(struct usb_device *dev,
+                        const struct firmware *frmwr)
+{
+        u8 *b, *p;
+        int ret = 0, i;
+        u8 reset;
+        u8 reset16 [] = {0, 0, 0, 0, 0, 0, 0};
+        const struct firmware *fw;
+        const char *filename = "dvb-usb-dw2101.fw";
+        switch (dev->descriptor.idProduct) {
+        case 0x2101:
+                ret = request_firmware(&fw, filename, &dev->dev);
+                if (ret != 0) {
+                        err("did not find the firmware file. (%s) "
+                        "Please see linux/Documentation/dvb/ for more details "
+                        "on firmware-problems.", filename);
+                        return ret;
+                }
+                break;
+        case USB_PID_DW2102:
+                fw = frmwr;
+                break;
+        }
+        info("start downloading DW2102 firmware");
+        p = kmalloc(fw->size, GFP_KERNEL);
+        reset = 1;
+        /*stop the CPU*/
+        dw2102_op_rw(dev, 0xa0, 0x7f92, &reset, 1, DW2102_WRITE_MSG);
+        dw2102_op_rw(dev, 0xa0, 0xe600, &reset, 1, DW2102_WRITE_MSG);
+
+        if (p != NULL) {
+                memcpy(p, fw->data, fw->size);
+                for (i = 0; i < fw->size; i += 0x40) {
+                        b = (u8 *) p + i;
+                        if (dw2102_op_rw
+                                (dev, 0xa0, i, b , 0x40,
+                                        DW2102_WRITE_MSG) != 0x40
+                                ) {
+                                err("error while transferring firmware");
+                                ret = -EINVAL;
+                                break;
+                        }
+                }
+                /* restart the CPU */
+                reset = 0;
+                if (ret || dw2102_op_rw
+                        (dev, 0xa0, 0x7f92, &reset, 1,
+                        DW2102_WRITE_MSG) != 1) {
+                        err("could not restart the USB controller CPU.");
+                        ret = -EINVAL;
+                }
+                if (ret || dw2102_op_rw
+                        (dev, 0xa0, 0xe600, &reset, 1,
+                        DW2102_WRITE_MSG) != 1) {
+                        err("could not restart the USB controller CPU.");
+                        ret = -EINVAL;
+                }
+                /* init registers */
+                switch (dev->descriptor.idProduct) {
+                case USB_PID_DW2102:
+                        dw2102_op_rw
+                                (dev, 0xbf, 0x0040, &reset, 0,
+                                DW2102_WRITE_MSG);
+                        dw2102_op_rw
+                                (dev, 0xb9, 0x0000, &reset16[0], 2,
+                                DW2102_READ_MSG);
+                        break;
+                case 0x2101:
+                        dw2102_op_rw
+                                (dev, 0xbc, 0x0030, &reset16[0], 2,
+                                DW2102_READ_MSG);
+                        dw2102_op_rw
+                                (dev, 0xba, 0x0000, &reset16[0], 7,
+                                DW2102_READ_MSG);
+                        dw2102_op_rw
+                                (dev, 0xba, 0x0000, &reset16[0], 7,
+                                DW2102_READ_MSG);
+                        dw2102_op_rw
+                                (dev, 0xb9, 0x0000, &reset16[0], 2,
+                                DW2102_READ_MSG);
+                        break;
+                }
+                kfree(p);
+        }
+        return ret;
+}
+
+static struct dvb_usb_device_properties dw2102_properties = {
+        .caps = DVB_USB_IS_AN_I2C_ADAPTER,
+        .usb_ctrl = DEVICE_SPECIFIC,
+        .firmware = "dvb-usb-dw2102.fw",
+        .size_of_priv = sizeof(struct dw2102_state),
+        .no_reconnect = 1,
+
+        .i2c_algo = &dw2102_i2c_algo,
+        .rc_key_map = dw2102_rc_keys,
+        .rc_key_map_size = ARRAY_SIZE(dw2102_rc_keys),
+        .rc_interval = 150,
+        .rc_query = dw2102_rc_query,
+
+        .generic_bulk_ctrl_endpoint = 0x81,
+        /* parameter for the MPEG2-data transfer */
+        .num_adapters = 1,
+        .download_firmware = dw2102_load_firmware,
+        .adapter = {
+                {
+                        .frontend_attach = dw2102_frontend_attach,
+                        .streaming_ctrl = NULL,
+                        .tuner_attach = dw2102_tuner_attach,
+                        .stream = {
+                                .type = USB_BULK,
+                                .count = 8,
+                                .endpoint = 0x82,
+                                .u = {
+                                        .bulk = {
+                                                .buffersize = 4096,
+                                        }
+                                }
+                        },
+                }
+        },
+        .num_device_descs = 2,
+        .devices = {
+                {"DVBWorld DVB-S 2102 USB2.0",
+                        {&dw2102_table[0], NULL},
+                        {NULL},
+                },
+                {"DVBWorld DVB-S 2101 USB2.0",
+                        {&dw2102_table[1], NULL},
+                        {NULL},
+                },
+        }
+};
+
+static int dw2102_probe(struct usb_interface *intf,
+                const struct usb_device_id *id)
+{
+        return dvb_usb_device_init(intf, &dw2102_properties,
+                THIS_MODULE, NULL, adapter_nr);
+}
+
+static struct usb_driver dw2102_driver = {
+        .name = "dw2102",
+        .probe = dw2102_probe,
+        .disconnect = dvb_usb_device_exit,
+        .id_table = dw2102_table,
+};
+
+static int __init dw2102_module_init(void)
+{
+        int ret =  usb_register(&dw2102_driver);
+        if (ret)
+                err("usb_register failed. Error number %d", ret);
+
+        return ret;
+}
+
+static void __exit dw2102_module_exit(void)
+{
+        usb_deregister(&dw2102_driver);
+}
+
+module_init(dw2102_module_init);
+module_exit(dw2102_module_exit);
+
+MODULE_AUTHOR("Igor M. Liplianin (c) liplianin@me.by");
+MODULE_DESCRIPTION("Driver for DVBWorld DVB-S 2101 2102 USB2.0 device");
+MODULE_VERSION("0.1");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/dvb-usb/dw2102.h b/drivers/media/dvb/dvb-usb/dw2102.h
new file mode 100644
index 000000000000..7a310f906837
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb/dw2102.h
@@ -0,0 +1,9 @@
+#ifndef _DW2102_H_
+#define _DW2102_H_
+
+#define DVB_USB_LOG_PREFIX "dw2102"
+#include "dvb-usb.h"
+
+extern int dvb_usb_dw2102_debug;
+#define deb_xfer(args...) dprintk(dvb_usb_dw2102_debug, 0x02, args)
+#endif
diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig
index c20553c4da1f..574dffe91b68 100644
--- a/drivers/media/dvb/frontends/Kconfig
+++ b/drivers/media/dvb/frontends/Kconfig
@@ -97,9 +97,8 @@ comment "DVB-T (terrestrial) frontends"
 
 config DVB_SP8870
         tristate "Spase sp8870 based"
-        depends on DVB_CORE && I2C && HOTPLUG
+        depends on DVB_CORE && I2C
         default m if DVB_FE_CUSTOMISE
-        select FW_LOADER
         help
           A DVB-T tuner module. Say Y when you want to support this frontend.
 
@@ -110,9 +109,8 @@ config DVB_SP8870
 
 config DVB_SP887X
         tristate "Spase sp887x based"
-        depends on DVB_CORE && I2C && HOTPLUG
+        depends on DVB_CORE && I2C
         default m if DVB_FE_CUSTOMISE
-        select FW_LOADER
         help
           A DVB-T tuner module. Say Y when you want to support this frontend.
 
@@ -135,6 +133,20 @@ config DVB_CX22702
         help
           A DVB-T tuner module. Say Y when you want to support this frontend.
 
+config DVB_DRX397XD
+        tristate "Micronas DRX3975D/DRX3977D based"
+        depends on DVB_CORE && I2C && HOTPLUG
+        default m if DVB_FE_CUSTOMISE
+        select FW_LOADER
+        help
+          A DVB-T tuner module. Say Y when you want to support this frontend.
+
+          TODO:
+          This driver needs external firmware. Please use the command
+          "<kerneldir>/Documentation/dvb/get_dvb_firmware drx397xD" to
+          download/extract them, and then copy them to /usr/lib/hotplug/firmware
+          or /lib/firmware (depending on configuration of firmware hotplug).
+
 config DVB_L64781
         tristate "LSI L64781"
         depends on DVB_CORE && I2C
@@ -144,9 +156,8 @@ config DVB_L64781
 
 config DVB_TDA1004X
         tristate "Philips TDA10045H/TDA10046H based"
-        depends on DVB_CORE && I2C && HOTPLUG
+        depends on DVB_CORE && I2C
         default m if DVB_FE_CUSTOMISE
-        select FW_LOADER
         help
           A DVB-T tuner module. Say Y when you want to support this frontend.
 
@@ -211,9 +222,8 @@ config DVB_DIB7000P
 
 config DVB_TDA10048
         tristate "Philips TDA10048HN based"
-        depends on DVB_CORE && I2C && HOTPLUG
+        depends on DVB_CORE && I2C
         default m if DVB_FE_CUSTOMISE
-        select FW_LOADER
         help
           A DVB-T tuner module. Say Y when you want to support this frontend.
 
@@ -253,9 +263,8 @@ comment "ATSC (North American/Korean Terrestrial/Cable DTV) frontends"
 
 config DVB_NXT200X
         tristate "NxtWave Communications NXT2002/NXT2004 based"
-        depends on DVB_CORE && I2C && HOTPLUG
+        depends on DVB_CORE && I2C
         default m if DVB_FE_CUSTOMISE
-        select FW_LOADER
         help
           An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want
           to support this frontend.
@@ -268,9 +277,8 @@ config DVB_NXT200X
 
 config DVB_OR51211
         tristate "Oren OR51211 based"
-        depends on DVB_CORE && I2C && HOTPLUG
+        depends on DVB_CORE && I2C
         default m if DVB_FE_CUSTOMISE
-        select FW_LOADER
         help
           An ATSC 8VSB tuner module. Say Y when you want to support this frontend.
 
@@ -281,9 +289,8 @@ config DVB_OR51211
 
 config DVB_OR51132
         tristate "Oren OR51132 based"
-        depends on DVB_CORE && I2C && HOTPLUG
+        depends on DVB_CORE && I2C
         default m if DVB_FE_CUSTOMISE
-        select FW_LOADER
         help
           An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want
           to support this frontend.
@@ -297,9 +304,8 @@ config DVB_OR51132
 
 config DVB_BCM3510
         tristate "Broadcom BCM3510"
-        depends on DVB_CORE && I2C && HOTPLUG
+        depends on DVB_CORE && I2C
         default m if DVB_FE_CUSTOMISE
-        select FW_LOADER
         help
           An ATSC 8VSB/16VSB and QAM64/256 tuner module. Say Y when you want to
           support this frontend.
diff --git a/drivers/media/dvb/frontends/Makefile b/drivers/media/dvb/frontends/Makefile
index a89dc0fc4c6f..028da55611c0 100644
--- a/drivers/media/dvb/frontends/Makefile
+++ b/drivers/media/dvb/frontends/Makefile
@@ -25,6 +25,7 @@ obj-$(CONFIG_DVB_NXT6000) += nxt6000.o
 obj-$(CONFIG_DVB_MT352) += mt352.o
 obj-$(CONFIG_DVB_ZL10353) += zl10353.o
 obj-$(CONFIG_DVB_CX22702) += cx22702.o
+obj-$(CONFIG_DVB_DRX397XD) += drx397xD.o
 obj-$(CONFIG_DVB_TDA10021) += tda10021.o
 obj-$(CONFIG_DVB_TDA10023) += tda10023.o
 obj-$(CONFIG_DVB_STV0297) += stv0297.o
diff --git a/drivers/media/dvb/frontends/drx397xD.c b/drivers/media/dvb/frontends/drx397xD.c
new file mode 100644
index 000000000000..3cbed874a6f8
--- /dev/null
+++ b/drivers/media/dvb/frontends/drx397xD.c
@@ -0,0 +1,1504 @@
+/*
+ * Driver for Micronas drx397xD demodulator
+ *
+ * Copyright (C) 2007 Henk Vergonet <Henk.Vergonet@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#define DEBUG                   /* uncomment if you want debugging output */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/firmware.h>
+#include <asm/div64.h>
+
+#include "dvb_frontend.h"
+#include "drx397xD.h"
+
+static const char mod_name[] = "drx397xD";
+
+#define MAX_CLOCK_DRIFT         200     /* maximal 200 PPM allowed */
+
+#define F_SET_0D0h      1
+#define F_SET_0D4h      2
+
+typedef enum fw_ix {
+#define _FW_ENTRY(a, b)         b
+#include "drx397xD_fw.h"
+} fw_ix_t;
+
+/* chip specifics */
+struct drx397xD_state {
+        struct i2c_adapter *i2c;
+        struct dvb_frontend frontend;
+        struct drx397xD_config config;
+        fw_ix_t chip_rev;
+        int flags;
+        u32 bandwidth_parm;     /* internal bandwidth conversions */
+        u32 f_osc;              /* w90: actual osc frequency [Hz] */
+};
+
+/*******************************************************************************
+ * Firmware
+ ******************************************************************************/
+
+static const char *blob_name[] = {
+#define _BLOB_ENTRY(a, b)               a
+#include "drx397xD_fw.h"
+};
+
+typedef enum blob_ix {
+#define _BLOB_ENTRY(a, b)               b
+#include "drx397xD_fw.h"
+} blob_ix_t;
+
+static struct {
+        const char *name;
+        const struct firmware *file;
+        rwlock_t lock;
+        int refcnt;
+        const u8 *data[ARRAY_SIZE(blob_name)];
+} fw[] = {
+#define _FW_ENTRY(a, b)         {                       \
+                        .name   = a,                    \
+                        .file   = 0,                    \
+                        .lock   = RW_LOCK_UNLOCKED,     \
+                        .refcnt = 0,                    \
+                        .data   = { }           }
+#include "drx397xD_fw.h"
+};
+
+/* use only with writer lock aquired */
+static void _drx_release_fw(struct drx397xD_state *s, fw_ix_t ix)
+{
+        memset(&fw[ix].data[0], 0, sizeof(fw[0].data));
+        if (fw[ix].file)
+                release_firmware(fw[ix].file);
+}
+
+static void drx_release_fw(struct drx397xD_state *s)
+{
+        fw_ix_t ix = s->chip_rev;
+
+        pr_debug("%s\n", __FUNCTION__);
+
+        write_lock(&fw[ix].lock);
+        if (fw[ix].refcnt) {
+                fw[ix].refcnt--;
+                if (fw[ix].refcnt == 0)
+                        _drx_release_fw(s, ix);
+        }
+        write_unlock(&fw[ix].lock);
+}
+
+static int drx_load_fw(struct drx397xD_state *s, fw_ix_t ix)
+{
+        const u8 *data;
+        size_t size, len;
+        int i = 0, j, rc = -EINVAL;
+
+        pr_debug("%s\n", __FUNCTION__);
+
+        if (ix < 0 || ix >= ARRAY_SIZE(fw))
+                return -EINVAL;
+        s->chip_rev = ix;
+
+        write_lock(&fw[ix].lock);
+        if (fw[ix].file) {
+                rc = 0;
+                goto exit_ok;
+        }
+        memset(&fw[ix].data[0], 0, sizeof(fw[0].data));
+
+        if (request_firmware(&fw[ix].file, fw[ix].name, &s->i2c->dev) != 0) {
+                printk(KERN_ERR "%s: Firmware \"%s\" not available\n",
+                       mod_name, fw[ix].name);
+                rc = -ENOENT;
+                goto exit_err;
+        }
+
+        if (!fw[ix].file->data || fw[ix].file->size < 10)
+                goto exit_corrupt;
+
+        data = fw[ix].file->data;
+        size = fw[ix].file->size;
+
+        if (data[i++] != 2)     /* check firmware version */
+                goto exit_corrupt;
+
+        do {
+                switch (data[i++]) {
+                case 0x00:      /* bytecode */
+                        if (i >= size)
+                                break;
+                        i += data[i];
+                case 0x01:      /* reset */
+                case 0x02:      /* sleep */
+                        i++;
+                        break;
+                case 0xfe:      /* name */
+                        len = strnlen(&data[i], size - i);
+                        if (i + len + 1 >= size)
+                                goto exit_corrupt;
+                        if (data[i + len + 1] != 0)
+                                goto exit_corrupt;
+                        for (j = 0; j < ARRAY_SIZE(blob_name); j++) {
+                                if (strcmp(blob_name[j], &data[i]) == 0) {
+                                        fw[ix].data[j] = &data[i + len + 1];
+                                        pr_debug("Loading %s\n", blob_name[j]);
+                                }
+                        }
+                        i += len + 1;
+                        break;
+                case 0xff:      /* file terminator */
+                        if (i == size) {
+                                rc = 0;
+                                goto exit_ok;
+                        }
+                default:
+                        goto exit_corrupt;
+                }
+        } while (i < size);
+      exit_corrupt:
+        printk(KERN_ERR "%s: Firmware is corrupt\n", mod_name);
+      exit_err:
+        _drx_release_fw(s, ix);
+        fw[ix].refcnt--;
+      exit_ok:
+        fw[ix].refcnt++;
+        write_unlock(&fw[ix].lock);
+        return rc;
+}
+
+/*******************************************************************************
+ * i2c bus IO
+ ******************************************************************************/
+
+static int write_fw(struct drx397xD_state *s, blob_ix_t ix)
+{
+        struct i2c_msg msg = {.addr = s->config.demod_address,.flags = 0 };
+        const u8 *data;
+        int len, rc = 0, i = 0;
+
+        if (ix < 0 || ix >= ARRAY_SIZE(blob_name)) {
+                pr_debug("%s drx_fw_ix_t out of range\n", __FUNCTION__);
+                return -EINVAL;
+        }
+        pr_debug("%s %s\n", __FUNCTION__, blob_name[ix]);
+
+        read_lock(&fw[s->chip_rev].lock);
+        data = fw[s->chip_rev].data[ix];
+        if (!data) {
+                rc = -EINVAL;
+                goto exit_rc;
+        }
+
+        for (;;) {
+                switch (data[i++]) {
+                case 0: /* bytecode */
+                        len = data[i++];
+                        msg.len = len;
+                        msg.buf = (__u8 *) &data[i];
+                        if (i2c_transfer(s->i2c, &msg, 1) != 1) {
+                                rc = -EIO;
+                                goto exit_rc;
+                        }
+                        i += len;
+                        break;
+                case 1: /* reset */
+                case 2: /* sleep */
+                        i++;
+                        break;
+                default:
+                        goto exit_rc;
+                }
+        }
+      exit_rc:
+        read_unlock(&fw[s->chip_rev].lock);
+        return 0;
+}
+
+/* Function is not endian safe, use the RD16 wrapper below */
+static int _read16(struct drx397xD_state *s, u32 i2c_adr)
+{
+        int rc;
+        u8 a[4];
+        u16 v;
+        struct i2c_msg msg[2] = {
+                {
+                 .addr = s->config.demod_address,
+                 .flags = 0,
+                 .buf = a,
+                 .len = sizeof(a)
+                 }
+                , {
+                   .addr = s->config.demod_address,
+                   .flags = I2C_M_RD,
+                   .buf = (u8 *) & v,
+                   .len = sizeof(v)
+                   }
+        };
+
+        *(u32 *) a = i2c_adr;
+
+        rc = i2c_transfer(s->i2c, msg, 2);
+        if (rc != 2)
+                return -EIO;
+
+        return le16_to_cpu(v);
+}
+
+/* Function is not endian safe, use the WR16.. wrappers below */
+static int _write16(struct drx397xD_state *s, u32 i2c_adr, u16 val)
+{
+        u8 a[6];
+        int rc;
+        struct i2c_msg msg = {
+                .addr = s->config.demod_address,
+                .flags = 0,
+                .buf = a,
+                .len = sizeof(a)
+        };
+
+        *(u32 *) a = i2c_adr;
+        *(u16 *) & a[4] = val;
+
+        rc = i2c_transfer(s->i2c, &msg, 1);
+        if (rc != 1)
+                return -EIO;
+        return 0;
+}
+
+#define WR16(ss,adr, val) \
+                _write16(ss, I2C_ADR_C0(adr), cpu_to_le16(val))
+#define WR16_E0(ss,adr, val) \
+                _write16(ss, I2C_ADR_E0(adr), cpu_to_le16(val))
+#define RD16(ss,adr) \
+                _read16(ss, I2C_ADR_C0(adr))
+
+#define EXIT_RC( cmd )  if ( (rc = (cmd)) < 0) goto exit_rc
+
+/*******************************************************************************
+ * Tuner callback
+ ******************************************************************************/
+
+static int PLL_Set(struct drx397xD_state *s,
+                   struct dvb_frontend_parameters *fep, int *df_tuner)
+{
+        struct dvb_frontend *fe = &s->frontend;
+        u32 f_tuner, f = fep->frequency;
+        int rc;
+
+        pr_debug("%s\n", __FUNCTION__);
+
+        if ((f > s->frontend.ops.tuner_ops.info.frequency_max) ||
+            (f < s->frontend.ops.tuner_ops.info.frequency_min))
+                return -EINVAL;
+
+        *df_tuner = 0;
+        if (!s->frontend.ops.tuner_ops.set_params ||
+            !s->frontend.ops.tuner_ops.get_frequency)
+                return -ENOSYS;
+
+        rc = s->frontend.ops.tuner_ops.set_params(fe, fep);
+        if (rc < 0)
+                return rc;
+
+        rc = s->frontend.ops.tuner_ops.get_frequency(fe, &f_tuner);
+        if (rc < 0)
+                return rc;
+
+        *df_tuner = f_tuner - f;
+        pr_debug("%s requested %d [Hz] tuner %d [Hz]\n", __FUNCTION__, f,
+                 f_tuner);
+
+        return 0;
+}
+
+/*******************************************************************************
+ * Demodulator helper functions
+ ******************************************************************************/
+
+static int SC_WaitForReady(struct drx397xD_state *s)
+{
+        int cnt = 1000;
+        int rc;
+
+        pr_debug("%s\n", __FUNCTION__);
+
+        while (cnt--) {
+                rc = RD16(s, 0x820043);
+                if (rc == 0)
+                        return 0;
+        }
+        return -1;
+}
+
+static int SC_SendCommand(struct drx397xD_state *s, int cmd)
+{
+        int rc;
+
+        pr_debug("%s\n", __FUNCTION__);
+
+        WR16(s, 0x820043, cmd);
+        SC_WaitForReady(s);
+        rc = RD16(s, 0x820042);
+        if ((rc & 0xffff) == 0xffff)
+                return -1;
+        return 0;
+}
+
+static int HI_Command(struct drx397xD_state *s, u16 cmd)
+{
+        int rc, cnt = 1000;
+
+        pr_debug("%s\n", __FUNCTION__);
+
+        rc = WR16(s, 0x420032, cmd);
+        if (rc < 0)
+                return rc;
+
+        do {
+                rc = RD16(s, 0x420032);
+                if (rc == 0) {
+                        rc = RD16(s, 0x420031);
+                        return rc;
+                }
+                if (rc < 0)
+                        return rc;
+        } while (--cnt);
+        return rc;
+}
+
+static int HI_CfgCommand(struct drx397xD_state *s)
+{
+
+        pr_debug("%s\n", __FUNCTION__);
+
+        WR16(s, 0x420033, 0x3973);
+        WR16(s, 0x420034, s->config.w50);       // code 4, log 4
+        WR16(s, 0x420035, s->config.w52);       // code 15,  log 9
+        WR16(s, 0x420036, s->config.demod_address << 1);
+        WR16(s, 0x420037, s->config.w56);       // code (set_i2c ??  initX 1 ), log 1
+//      WR16(s, 0x420033, 0x3973);
+        if ((s->config.w56 & 8) == 0)
+                return HI_Command(s, 3);
+        return WR16(s, 0x420032, 0x3);
+}
+
+static const u8 fastIncrDecLUT_15273[] = {
+        0x0e, 0x0f, 0x0f, 0x10, 0x11, 0x12, 0x12, 0x13, 0x14,
+        0x15, 0x16, 0x17, 0x18, 0x1a, 0x1b, 0x1c, 0x1d, 0x1f
+};
+
+static const u8 slowIncrDecLUT_15272[] = {
+        3, 4, 4, 5, 6
+};
+
+static int SetCfgIfAgc(struct drx397xD_state *s, struct drx397xD_CfgIfAgc *agc)
+{
+        u16 w06 = agc->w06;
+        u16 w08 = agc->w08;
+        u16 w0A = agc->w0A;
+        u16 w0C = agc->w0C;
+        int quot, rem, i, rc = -EINVAL;
+
+        pr_debug("%s\n", __FUNCTION__);
+
+        if (agc->w04 > 0x3ff)
+                goto exit_rc;
+
+        if (agc->d00 == 1) {
+                EXIT_RC(RD16(s, 0x0c20010));
+                rc &= ~0x10;
+                EXIT_RC(WR16(s, 0x0c20010, rc));
+                return WR16(s, 0x0c20030, agc->w04 & 0x7ff);
+        }
+
+        if (agc->d00 != 0)
+                goto exit_rc;
+        if (w0A < w08)
+                goto exit_rc;
+        if (w0A > 0x3ff)
+                goto exit_rc;
+        if (w0C > 0x3ff)
+                goto exit_rc;
+        if (w06 > 0x3ff)
+                goto exit_rc;
+
+        EXIT_RC(RD16(s, 0x0c20010));
+        rc |= 0x10;
+        EXIT_RC(WR16(s, 0x0c20010, rc));
+
+        EXIT_RC(WR16(s, 0x0c20025, (w06 >> 1) & 0x1ff));
+        EXIT_RC(WR16(s, 0x0c20031, (w0A - w08) >> 1));
+        EXIT_RC(WR16(s, 0x0c20032, ((w0A + w08) >> 1) - 0x1ff));
+
+        quot = w0C / 113;
+        rem = w0C % 113;
+        if (quot <= 8) {
+                quot = 8 - quot;
+        } else {
+                quot = 0;
+                rem += 113;
+        }
+
+        EXIT_RC(WR16(s, 0x0c20024, quot));
+
+        i = fastIncrDecLUT_15273[rem / 8];
+        EXIT_RC(WR16(s, 0x0c2002d, i));
+        EXIT_RC(WR16(s, 0x0c2002e, i));
+
+        i = slowIncrDecLUT_15272[rem / 28];
+        EXIT_RC(WR16(s, 0x0c2002b, i));
+        rc = WR16(s, 0x0c2002c, i);
+      exit_rc:
+        return rc;
+}
+
+static int SetCfgRfAgc(struct drx397xD_state *s, struct drx397xD_CfgRfAgc *agc)
+{
+        u16 w04 = agc->w04;
+        u16 w06 = agc->w06;
+        int rc = -1;
+
+        pr_debug("%s %d 0x%x 0x%x\n", __FUNCTION__, agc->d00, w04, w06);
+
+        if (w04 > 0x3ff)
+                goto exit_rc;
+
+        switch (agc->d00) {
+        case 1:
+                if (w04 == 0x3ff)
+                        w04 = 0x400;
+
+                EXIT_RC(WR16(s, 0x0c20036, w04));
+                s->config.w9C &= ~2;
+                EXIT_RC(WR16(s, 0x0c20015, s->config.w9C));
+                EXIT_RC(RD16(s, 0x0c20010));
+                rc &= 0xbfdf;
+                EXIT_RC(WR16(s, 0x0c20010, rc));
+                EXIT_RC(RD16(s, 0x0c20013));
+                rc &= ~2;
+                break;
+        case 0:
+                // loc_8000659
+                s->config.w9C &= ~2;
+                EXIT_RC(WR16(s, 0x0c20015, s->config.w9C));
+                EXIT_RC(RD16(s, 0x0c20010));
+                rc &= 0xbfdf;
+                rc |= 0x4000;
+                EXIT_RC(WR16(s, 0x0c20010, rc));
+                EXIT_RC(WR16(s, 0x0c20051, (w06 >> 4) & 0x3f));
+                EXIT_RC(RD16(s, 0x0c20013));
+                rc &= ~2;
+                break;
+        default:
+                s->config.w9C |= 2;
+                EXIT_RC(WR16(s, 0x0c20015, s->config.w9C));
+                EXIT_RC(RD16(s, 0x0c20010));
+                rc &= 0xbfdf;
+                EXIT_RC(WR16(s, 0x0c20010, rc));
+
+                EXIT_RC(WR16(s, 0x0c20036, 0));
+
+                EXIT_RC(RD16(s, 0x0c20013));
+                rc |= 2;
+        }
+        rc = WR16(s, 0x0c20013, rc);
+      exit_rc:
+        return rc;
+}
+
+static int GetLockStatus(struct drx397xD_state *s, int *lockstat)
+{
+        int rc;
+
+        *lockstat = 0;
+
+        rc = RD16(s, 0x082004b);
+        if (rc < 0)
+                return rc;
+
+        if (s->config.d60 != 2)
+                return 0;
+
+        if ((rc & 7) == 7)
+                *lockstat |= 1;
+        if ((rc & 3) == 3)
+                *lockstat |= 2;
+        if (rc & 1)
+                *lockstat |= 4;
+        return 0;
+}
+
+static int CorrectSysClockDeviation(struct drx397xD_state *s)
+{
+        int rc = -EINVAL;
+        int lockstat;
+        u32 clk, clk_limit;
+
+        pr_debug("%s\n", __FUNCTION__);
+
+        if (s->config.d5C == 0) {
+                EXIT_RC(WR16(s, 0x08200e8, 0x010));
+                EXIT_RC(WR16(s, 0x08200e9, 0x113));
+                s->config.d5C = 1;
+                return rc;
+        }
+        if (s->config.d5C != 1)
+                goto exit_rc;
+
+        rc = RD16(s, 0x0820048);
+
+        rc = GetLockStatus(s, &lockstat);
+        if (rc < 0)
+                goto exit_rc;
+        if ((lockstat & 1) == 0)
+                goto exit_rc;
+
+        EXIT_RC(WR16(s, 0x0420033, 0x200));
+        EXIT_RC(WR16(s, 0x0420034, 0xc5));
+        EXIT_RC(WR16(s, 0x0420035, 0x10));
+        EXIT_RC(WR16(s, 0x0420036, 0x1));
+        EXIT_RC(WR16(s, 0x0420037, 0xa));
+        EXIT_RC(HI_Command(s, 6));
+        EXIT_RC(RD16(s, 0x0420040));
+        clk = rc;
+        EXIT_RC(RD16(s, 0x0420041));
+        clk |= rc << 16;
+
+        if (clk <= 0x26ffff)
+                goto exit_rc;
+        if (clk > 0x610000)
+                goto exit_rc;
+
+        if (!s->bandwidth_parm)
+                return -EINVAL;
+
+        /* round & convert to Hz */
+        clk = ((u64) (clk + 0x800000) * s->bandwidth_parm + (1 << 20)) >> 21;
+        clk_limit = s->config.f_osc * MAX_CLOCK_DRIFT / 1000;
+
+        if (clk - s->config.f_osc * 1000 + clk_limit <= 2 * clk_limit) {
+                s->f_osc = clk;
+                pr_debug("%s: osc %d %d [Hz]\n", __FUNCTION__,
+                         s->config.f_osc * 1000, clk - s->config.f_osc * 1000);
+        }
+        rc = WR16(s, 0x08200e8, 0);
+      exit_rc:
+        return rc;
+}
+
+static int ConfigureMPEGOutput(struct drx397xD_state *s, int type)
+{
+        int rc, si, bp;
+
+        pr_debug("%s\n", __FUNCTION__);
+
+        si = s->config.wA0;
+        if (s->config.w98 == 0) {
+                si |= 1;
+                bp = 0;
+        } else {
+                si &= ~1;
+                bp = 0x200;
+        }
+        if (s->config.w9A == 0) {
+                si |= 0x80;
+        } else {
+                si &= ~0x80;
+        }
+
+        EXIT_RC(WR16(s, 0x2150045, 0));
+        EXIT_RC(WR16(s, 0x2150010, si));
+        EXIT_RC(WR16(s, 0x2150011, bp));
+        rc = WR16(s, 0x2150012, (type == 0 ? 0xfff : 0));
+      exit_rc:
+        return rc;
+}
+
+static int drx_tune(struct drx397xD_state *s,
+                    struct dvb_frontend_parameters *fep)
+{
+        u16 v22 = 0;
+        u16 v1C = 0;
+        u16 v1A = 0;
+        u16 v18 = 0;
+        u32 edi = 0, ebx = 0, ebp = 0, edx = 0;
+        u16 v20 = 0, v1E = 0, v16 = 0, v14 = 0, v12 = 0, v10 = 0, v0E = 0;
+
+        int rc, df_tuner;
+        int a, b, c, d;
+        pr_debug("%s %d\n", __FUNCTION__, s->config.d60);
+
+        if (s->config.d60 != 2)
+                goto set_tuner;
+        rc = CorrectSysClockDeviation(s);
+        if (rc < 0)
+                goto set_tuner;
+
+        s->config.d60 = 1;
+        rc = ConfigureMPEGOutput(s, 0);
+        if (rc < 0)
+                goto set_tuner;
+      set_tuner:
+
+        rc = PLL_Set(s, fep, &df_tuner);
+        if (rc < 0) {
+                printk(KERN_ERR "Error in pll_set\n");
+                goto exit_rc;
+        }
+        msleep(200);
+
+        a = rc = RD16(s, 0x2150016);
+        if (rc < 0)
+                goto exit_rc;
+        b = rc = RD16(s, 0x2150010);
+        if (rc < 0)
+                goto exit_rc;
+        c = rc = RD16(s, 0x2150034);
+        if (rc < 0)
+                goto exit_rc;
+        d = rc = RD16(s, 0x2150035);
+        if (rc < 0)
+                goto exit_rc;
+        rc = WR16(s, 0x2150014, c);
+        rc = WR16(s, 0x2150015, d);
+        rc = WR16(s, 0x2150010, 0);
+        rc = WR16(s, 0x2150000, 2);
+        rc = WR16(s, 0x2150036, 0x0fff);
+        rc = WR16(s, 0x2150016, a);
+
+        rc = WR16(s, 0x2150010, 2);
+        rc = WR16(s, 0x2150007, 0);
+        rc = WR16(s, 0x2150000, 1);
+        rc = WR16(s, 0x2110000, 0);
+        rc = WR16(s, 0x0800000, 0);
+        rc = WR16(s, 0x2800000, 0);
+        rc = WR16(s, 0x2110010, 0x664);
+
+        rc = write_fw(s, DRXD_ResetECRAM);
+        rc = WR16(s, 0x2110000, 1);
+
+        rc = write_fw(s, DRXD_InitSC);
+        if (rc < 0)
+                goto exit_rc;
+
+        rc = SetCfgIfAgc(s, &s->config.ifagc);
+        if (rc < 0)
+                goto exit_rc;
+
+        rc = SetCfgRfAgc(s, &s->config.rfagc);
+        if (rc < 0)
+                goto exit_rc;
+
+        if (fep->u.ofdm.transmission_mode != TRANSMISSION_MODE_2K)
+                v22 = 1;
+        switch (fep->u.ofdm.transmission_mode) {
+        case TRANSMISSION_MODE_8K:
+                edi = 1;
+                if (s->chip_rev == DRXD_FW_B1)
+                        break;
+
+                rc = WR16(s, 0x2010010, 0);
+                if (rc < 0)
+                        break;
+                v1C = 0x63;
+                v1A = 0x53;
+                v18 = 0x43;
+                break;
+        default:
+                edi = 0;
+                if (s->chip_rev == DRXD_FW_B1)
+                        break;
+
+                rc = WR16(s, 0x2010010, 1);
+                if (rc < 0)
+                        break;
+
+                v1C = 0x61;
+                v1A = 0x47;
+                v18 = 0x41;
+        }
+
+        switch (fep->u.ofdm.guard_interval) {
+        case GUARD_INTERVAL_1_4:
+                edi |= 0x0c;
+                break;
+        case GUARD_INTERVAL_1_8:
+                edi |= 0x08;
+                break;
+        case GUARD_INTERVAL_1_16:
+                edi |= 0x04;
+                break;
+        case GUARD_INTERVAL_1_32:
+                break;
+        default:
+                v22 |= 2;
+        }
+
+        ebx = 0;
+        ebp = 0;
+        v20 = 0;
+        v1E = 0;
+        v16 = 0;
+        v14 = 0;
+        v12 = 0;
+        v10 = 0;
+        v0E = 0;
+
+        switch (fep->u.ofdm.hierarchy_information) {
+        case HIERARCHY_1:
+                edi |= 0x40;
+                if (s->chip_rev == DRXD_FW_B1)
+                        break;
+                rc = WR16(s, 0x1c10047, 1);
+                if (rc < 0)
+                        goto exit_rc;
+                rc = WR16(s, 0x2010012, 1);
+                if (rc < 0)
+                        goto exit_rc;
+                ebx = 0x19f;
+                ebp = 0x1fb;
+                v20 = 0x0c0;
+                v1E = 0x195;
+                v16 = 0x1d6;
+                v14 = 0x1ef;
+                v12 = 4;
+                v10 = 5;
+                v0E = 5;
+                break;
+        case HIERARCHY_2:
+                edi |= 0x80;
+                if (s->chip_rev == DRXD_FW_B1)
+                        break;
+                rc = WR16(s, 0x1c10047, 2);
+                if (rc < 0)
+                        goto exit_rc;
+                rc = WR16(s, 0x2010012, 2);
+                if (rc < 0)
+                        goto exit_rc;
+                ebx = 0x08f;
+                ebp = 0x12f;
+                v20 = 0x0c0;
+                v1E = 0x11e;
+                v16 = 0x1d6;
+                v14 = 0x15e;
+                v12 = 4;
+                v10 = 5;
+                v0E = 5;
+                break;
+        case HIERARCHY_4:
+                edi |= 0xc0;
+                if (s->chip_rev == DRXD_FW_B1)
+                        break;
+                rc = WR16(s, 0x1c10047, 3);
+                if (rc < 0)
+                        goto exit_rc;
+                rc = WR16(s, 0x2010012, 3);
+                if (rc < 0)
+                        goto exit_rc;
+                ebx = 0x14d;
+                ebp = 0x197;
+                v20 = 0x0c0;
+                v1E = 0x1ce;
+                v16 = 0x1d6;
+                v14 = 0x11a;
+                v12 = 4;
+                v10 = 6;
+                v0E = 5;
+                break;
+        default:
+                v22 |= 8;
+                if (s->chip_rev == DRXD_FW_B1)
+                        break;
+                rc = WR16(s, 0x1c10047, 0);
+                if (rc < 0)
+                        goto exit_rc;
+                rc = WR16(s, 0x2010012, 0);
+                if (rc < 0)
+                        goto exit_rc;
+                //              QPSK    QAM16   QAM64
+                ebx = 0x19f;    //                 62
+                ebp = 0x1fb;    //                 15
+                v20 = 0x16a;    //  62
+                v1E = 0x195;    //         62
+                v16 = 0x1bb;    //  15
+                v14 = 0x1ef;    //         15
+                v12 = 5;        //  16
+                v10 = 5;        //         16
+                v0E = 5;        //                 16
+        }
+
+        switch (fep->u.ofdm.constellation) {
+        default:
+                v22 |= 4;
+        case QPSK:
+                if (s->chip_rev == DRXD_FW_B1)
+                        break;
+
+                rc = WR16(s, 0x1c10046, 0);
+                if (rc < 0)
+                        goto exit_rc;
+                rc = WR16(s, 0x2010011, 0);
+                if (rc < 0)
+                        goto exit_rc;
+                rc = WR16(s, 0x201001a, 0x10);
+                if (rc < 0)
+                        goto exit_rc;
+                rc = WR16(s, 0x201001b, 0);
+                if (rc < 0)
+                        goto exit_rc;
+                rc = WR16(s, 0x201001c, 0);
+                if (rc < 0)
+                        goto exit_rc;
+                rc = WR16(s, 0x1c10062, v20);
+                if (rc < 0)
+                        goto exit_rc;
+                rc = WR16(s, 0x1c1002a, v1C);
+                if (rc < 0)
+                        goto exit_rc;
+                rc = WR16(s, 0x1c10015, v16);
+                if (rc < 0)
+                        goto exit_rc;
+                rc = WR16(s, 0x1c10016, v12);
+                if (rc < 0)
+                        goto exit_rc;
+                break;
+        case QAM_16:
+                edi |= 0x10;
+                if (s->chip_rev == DRXD_FW_B1)
+                        break;
+
+                rc = WR16(s, 0x1c10046, 1);
+                if (rc < 0)
+                        goto exit_rc;
+                rc = WR16(s, 0x2010011, 1);
+                if (rc < 0)
+                        goto exit_rc;
+                rc = WR16(s, 0x201001a, 0x10);
+                if (rc < 0)
+                        goto exit_rc;
+                rc = WR16(s, 0x201001b, 4);
+                if (rc < 0)
+                        goto exit_rc;
+                rc = WR16(s, 0x201001c, 0);
+                if (rc < 0)
+                        goto exit_rc;
+                rc = WR16(s, 0x1c10062, v1E);
+                if (rc < 0)
+                        goto exit_rc;
+                rc = WR16(s, 0x1c1002a, v1A);
+                if (rc < 0)
+                        goto exit_rc;
+                rc = WR16(s, 0x1c10015, v14);
+                if (rc < 0)
+                        goto exit_rc;
+                rc = WR16(s, 0x1c10016, v10);
+                if (rc < 0)
+                        goto exit_rc;
+                break;
+        case QAM_64:
+                edi |= 0x20;
+                rc = WR16(s, 0x1c10046, 2);
+                if (rc < 0)
+                        goto exit_rc;
+                rc = WR16(s, 0x2010011, 2);
+                if (rc < 0)
+                        goto exit_rc;
+                rc = WR16(s, 0x201001a, 0x20);
+                if (rc < 0)
+                        goto exit_rc;
+                rc = WR16(s, 0x201001b, 8);
+                if (rc < 0)
+                        goto exit_rc;
+                rc = WR16(s, 0x201001c, 2);
+                if (rc < 0)
+                        goto exit_rc;
+                rc = WR16(s, 0x1c10062, ebx);
+                if (rc < 0)
+                        goto exit_rc;
+                rc = WR16(s, 0x1c1002a, v18);
+                if (rc < 0)
+                        goto exit_rc;
+                rc = WR16(s, 0x1c10015, ebp);
+                if (rc < 0)
+                        goto exit_rc;
+                rc = WR16(s, 0x1c10016, v0E);
+                if (rc < 0)
+                        goto exit_rc;
+                break;
+        }
+
+        if (s->config.s20d24 == 1) {
+                rc = WR16(s, 0x2010013, 0);
+        } else {
+                rc = WR16(s, 0x2010013, 1);
+                edi |= 0x1000;
+        }
+
+        switch (fep->u.ofdm.code_rate_HP) {
+        default:
+                v22 |= 0x10;
+        case FEC_1_2:
+                if (s->chip_rev == DRXD_FW_B1)
+                        break;
+                rc = WR16(s, 0x2090011, 0);
+                break;
+        case FEC_2_3:
+                edi |= 0x200;
+                if (s->chip_rev == DRXD_FW_B1)
+                        break;
+                rc = WR16(s, 0x2090011, 1);
+                break;
+        case FEC_3_4:
+                edi |= 0x400;
+                if (s->chip_rev == DRXD_FW_B1)
+                        break;
+                rc = WR16(s, 0x2090011, 2);
+                break;
+        case FEC_5_6:           /* 5 */
+                edi |= 0x600;
+                if (s->chip_rev == DRXD_FW_B1)
+                        break;
+                rc = WR16(s, 0x2090011, 3);
+                break;
+        case FEC_7_8:           /* 7 */
+                edi |= 0x800;
+                if (s->chip_rev == DRXD_FW_B1)
+                        break;
+                rc = WR16(s, 0x2090011, 4);
+                break;
+        };
+        if (rc < 0)
+                goto exit_rc;
+
+        switch (fep->u.ofdm.bandwidth) {
+        default:
+                rc = -EINVAL;
+                goto exit_rc;
+        case BANDWIDTH_8_MHZ:   /* 0 */
+        case BANDWIDTH_AUTO:
+                rc = WR16(s, 0x0c2003f, 0x32);
+                s->bandwidth_parm = ebx = 0x8b8249;     // 9142857
+                edx = 0;
+                break;
+        case BANDWIDTH_7_MHZ:
+                rc = WR16(s, 0x0c2003f, 0x3b);
+                s->bandwidth_parm = ebx = 0x7a1200;     // 8000000
+                edx = 0x4807;
+                break;
+        case BANDWIDTH_6_MHZ:
+                rc = WR16(s, 0x0c2003f, 0x47);
+                s->bandwidth_parm = ebx = 0x68a1b6;     // 6857142
+                edx = 0x0f07;
+                break;
+        };
+
+        if (rc < 0)
+                goto exit_rc;
+
+        rc = WR16(s, 0x08200ec, edx);
+        if (rc < 0)
+                goto exit_rc;
+
+        rc = RD16(s, 0x0820050);
+        if (rc < 0)
+                goto exit_rc;
+        rc = WR16(s, 0x0820050, rc);
+
+        {
+                /* Configure bandwidth specific factor */
+                ebx = div64_u64(((u64) (s->f_osc) << 21) + (ebx >> 1),
+                                     (u64)ebx) - 0x800000;
+                EXIT_RC(WR16(s, 0x0c50010, ebx & 0xffff));
+                EXIT_RC(WR16(s, 0x0c50011, ebx >> 16));
+
+                /* drx397xD oscillator calibration */
+                ebx = div64_u64(((u64) (s->config.f_if + df_tuner) << 28) +
+                                     (s->f_osc >> 1), (u64)s->f_osc);
+        }
+        ebx &= 0xfffffff;
+        if (fep->inversion == INVERSION_ON)
+                ebx = 0x10000000 - ebx;
+
+        EXIT_RC(WR16(s, 0x0c30010, ebx & 0xffff));
+        EXIT_RC(WR16(s, 0x0c30011, ebx >> 16));
+
+        EXIT_RC(WR16(s, 0x0800000, 1));
+        EXIT_RC(RD16(s, 0x0800000));
+
+
+        EXIT_RC(SC_WaitForReady(s));
+        EXIT_RC(WR16(s, 0x0820042, 0));
+        EXIT_RC(WR16(s, 0x0820041, v22));
+        EXIT_RC(WR16(s, 0x0820040, edi));
+        EXIT_RC(SC_SendCommand(s, 3));
+
+        rc = RD16(s, 0x0800000);
+
+        SC_WaitForReady(s);
+        WR16(s, 0x0820042, 0);
+        WR16(s, 0x0820041, 1);
+        WR16(s, 0x0820040, 1);
+        SC_SendCommand(s, 1);
+
+//      rc = WR16(s, 0x2150000, 1);
+//      if (rc < 0) goto exit_rc;
+
+        rc = WR16(s, 0x2150000, 2);
+        rc = WR16(s, 0x2150016, a);
+        rc = WR16(s, 0x2150010, 4);
+        rc = WR16(s, 0x2150036, 0);
+        rc = WR16(s, 0x2150000, 1);
+        s->config.d60 = 2;
+      exit_rc:
+        return rc;
+}
+
+/*******************************************************************************
+ * DVB interface
+ ******************************************************************************/
+
+static int drx397x_init(struct dvb_frontend *fe)
+{
+        struct drx397xD_state *s = fe->demodulator_priv;
+        int rc;
+
+        pr_debug("%s\n", __FUNCTION__);
+
+        s->config.rfagc.d00 = 2;        /* 0x7c */
+        s->config.rfagc.w04 = 0;
+        s->config.rfagc.w06 = 0x3ff;
+
+        s->config.ifagc.d00 = 0;        /* 0x68 */
+        s->config.ifagc.w04 = 0;
+        s->config.ifagc.w06 = 140;
+        s->config.ifagc.w08 = 0;
+        s->config.ifagc.w0A = 0x3ff;
+        s->config.ifagc.w0C = 0x388;
+
+        /* for signal strenght calculations */
+        s->config.ss76 = 820;
+        s->config.ss78 = 2200;
+        s->config.ss7A = 150;
+
+        /* HI_CfgCommand */
+        s->config.w50 = 4;
+        s->config.w52 = 9;      // 0xf;
+
+        s->config.f_if = 42800000;      /* d14: intermediate frequency [Hz]     */
+        s->config.f_osc = 48000;        /* s66 : oscillator frequency [kHz]     */
+        s->config.w92 = 12000;  // 20000;
+
+        s->config.w9C = 0x000e;
+        s->config.w9E = 0x0000;
+
+        /* ConfigureMPEGOutput params */
+        s->config.wA0 = 4;
+        s->config.w98 = 1;      // 0;
+        s->config.w9A = 1;
+
+        /* get chip revision */
+        rc = RD16(s, 0x2410019);
+        if (rc < 0)
+                return -ENODEV;
+
+        if (rc == 0) {
+                printk(KERN_INFO "%s: chip revision A2\n", mod_name);
+                rc = drx_load_fw(s, DRXD_FW_A2);
+        } else {
+
+                rc = (rc >> 12) - 3;
+                switch (rc) {
+                case 1:
+                        s->flags |= F_SET_0D4h;
+                case 0:
+                case 4:
+                        s->flags |= F_SET_0D0h;
+                        break;
+                case 2:
+                case 5:
+                        break;
+                case 3:
+                        s->flags |= F_SET_0D4h;
+                        break;
+                default:
+                        return -ENODEV;
+                };
+                printk(KERN_INFO "%s: chip revision B1.%d\n", mod_name, rc);
+                rc = drx_load_fw(s, DRXD_FW_B1);
+        }
+        if (rc < 0)
+                goto error;
+
+        rc = WR16(s, 0x0420033, 0x3973);
+        if (rc < 0)
+                goto error;
+
+        rc = HI_Command(s, 2);
+
+        msleep(1);
+
+        if (s->chip_rev == DRXD_FW_A2) {
+                rc = WR16(s, 0x043012d, 0x47F);
+                if (rc < 0)
+                        goto error;
+        }
+        rc = WR16_E0(s, 0x0400000, 0);
+        if (rc < 0)
+                goto error;
+
+        if (s->config.w92 > 20000 || s->config.w92 % 4000) {
+                printk(KERN_ERR "%s: invalid osc frequency\n", mod_name);
+                rc = -1;
+                goto error;
+        }
+
+        rc = WR16(s, 0x2410010, 1);
+        if (rc < 0)
+                goto error;
+        rc = WR16(s, 0x2410011, 0x15);
+        if (rc < 0)
+                goto error;
+        rc = WR16(s, 0x2410012, s->config.w92 / 4000);
+        if (rc < 0)
+                goto error;
+#ifdef ORIG_FW
+        rc = WR16(s, 0x2410015, 2);
+        if (rc < 0)
+                goto error;
+#endif
+        rc = WR16(s, 0x2410017, 0x3973);
+        if (rc < 0)
+                goto error;
+
+        s->f_osc = s->config.f_osc * 1000;      /* initial estimator */
+
+        s->config.w56 = 1;
+
+        rc = HI_CfgCommand(s);
+        if (rc < 0)
+                goto error;
+
+        rc = write_fw(s, DRXD_InitAtomicRead);
+        if (rc < 0)
+                goto error;
+
+        if (s->chip_rev == DRXD_FW_A2) {
+                rc = WR16(s, 0x2150013, 0);
+                if (rc < 0)
+                        goto error;
+        }
+
+        rc = WR16_E0(s, 0x0400002, 0);
+        if (rc < 0)
+                goto error;
+        rc = WR16(s, 0x0400002, 0);
+        if (rc < 0)
+                goto error;
+
+        if (s->chip_rev == DRXD_FW_A2) {
+                rc = write_fw(s, DRXD_ResetCEFR);
+                if (rc < 0)
+                        goto error;
+        }
+        rc = write_fw(s, DRXD_microcode);
+        if (rc < 0)
+                goto error;
+
+        s->config.w9C = 0x0e;
+        if (s->flags & F_SET_0D0h) {
+                s->config.w9C = 0;
+                rc = RD16(s, 0x0c20010);
+                if (rc < 0)
+                        goto write_DRXD_InitFE_1;
+
+                rc &= ~0x1000;
+                rc = WR16(s, 0x0c20010, rc);
+                if (rc < 0)
+                        goto write_DRXD_InitFE_1;
+
+                rc = RD16(s, 0x0c20011);
+                if (rc < 0)
+                        goto write_DRXD_InitFE_1;
+
+                rc &= ~0x8;
+                rc = WR16(s, 0x0c20011, rc);
+                if (rc < 0)
+                        goto write_DRXD_InitFE_1;
+
+                rc = WR16(s, 0x0c20012, 1);
+        }
+
+      write_DRXD_InitFE_1:
+
+        rc = write_fw(s, DRXD_InitFE_1);
+        if (rc < 0)
+                goto error;
+
+        rc = 1;
+        if (s->chip_rev == DRXD_FW_B1) {
+                if (s->flags & F_SET_0D0h)
+                        rc = 0;
+        } else {
+                if (s->flags & F_SET_0D0h)
+                        rc = 4;
+        }
+
+        rc = WR16(s, 0x0C20012, rc);
+        if (rc < 0)
+                goto error;
+
+        rc = WR16(s, 0x0C20013, s->config.w9E);
+        if (rc < 0)
+                goto error;
+        rc = WR16(s, 0x0C20015, s->config.w9C);
+        if (rc < 0)
+                goto error;
+
+        rc = write_fw(s, DRXD_InitFE_2);
+        if (rc < 0)
+                goto error;
+        rc = write_fw(s, DRXD_InitFT);
+        if (rc < 0)
+                goto error;
+        rc = write_fw(s, DRXD_InitCP);
+        if (rc < 0)
+                goto error;
+        rc = write_fw(s, DRXD_InitCE);
+        if (rc < 0)
+                goto error;
+        rc = write_fw(s, DRXD_InitEQ);
+        if (rc < 0)
+                goto error;
+        rc = write_fw(s, DRXD_InitEC);
+        if (rc < 0)
+                goto error;
+        rc = write_fw(s, DRXD_InitSC);
+        if (rc < 0)
+                goto error;
+
+        rc = SetCfgIfAgc(s, &s->config.ifagc);
+        if (rc < 0)
+                goto error;
+
+        rc = SetCfgRfAgc(s, &s->config.rfagc);
+        if (rc < 0)
+                goto error;
+
+        rc = ConfigureMPEGOutput(s, 1);
+        rc = WR16(s, 0x08201fe, 0x0017);
+        rc = WR16(s, 0x08201ff, 0x0101);
+
+        s->config.d5C = 0;
+        s->config.d60 = 1;
+        s->config.d48 = 1;
+      error:
+        return rc;
+}
+
+static int drx397x_get_frontend(struct dvb_frontend *fe,
+                                struct dvb_frontend_parameters *params)
+{
+        return 0;
+}
+
+static int drx397x_set_frontend(struct dvb_frontend *fe,
+                                struct dvb_frontend_parameters *params)
+{
+        struct drx397xD_state *s = fe->demodulator_priv;
+
+        s->config.s20d24 = 1;   // 0;
+        return drx_tune(s, params);
+}
+
+static int drx397x_get_tune_settings(struct dvb_frontend *fe,
+                                     struct dvb_frontend_tune_settings
+                                     *fe_tune_settings)
+{
+        fe_tune_settings->min_delay_ms = 10000;
+        fe_tune_settings->step_size = 0;
+        fe_tune_settings->max_drift = 0;
+        return 0;
+}
+
+static int drx397x_read_status(struct dvb_frontend *fe, fe_status_t * status)
+{
+        struct drx397xD_state *s = fe->demodulator_priv;
+        int lockstat;
+
+        GetLockStatus(s, &lockstat);
+        /* TODO */
+//      if (lockstat & 1)
+//      CorrectSysClockDeviation(s);
+
+        *status = 0;
+        if (lockstat & 2) {
+                CorrectSysClockDeviation(s);
+                ConfigureMPEGOutput(s, 1);
+                *status = FE_HAS_LOCK | FE_HAS_SYNC | FE_HAS_VITERBI;
+        }
+        if (lockstat & 4) {
+                *status |= FE_HAS_CARRIER | FE_HAS_SIGNAL;
+        }
+
+        return 0;
+}
+
+static int drx397x_read_ber(struct dvb_frontend *fe, unsigned int *ber)
+{
+        *ber = 0;
+        return 0;
+}
+
+static int drx397x_read_snr(struct dvb_frontend *fe, u16 * snr)
+{
+        *snr = 0;
+        return 0;
+}
+
+static int drx397x_read_signal_strength(struct dvb_frontend *fe, u16 * strength)
+{
+        struct drx397xD_state *s = fe->demodulator_priv;
+        int rc;
+
+        if (s->config.ifagc.d00 == 2) {
+                *strength = 0xffff;
+                return 0;
+        }
+        rc = RD16(s, 0x0c20035);
+        if (rc < 0) {
+                *strength = 0;
+                return 0;
+        }
+        rc &= 0x3ff;
+        /* Signal strength is calculated using the following formula:
+         *
+         * a = 2200 * 150 / (2200 + 150);
+         * a = a * 3300 /  (a + 820);
+         * b = 2200 * 3300 / (2200 + 820);
+         * c = (((b-a) * rc) >> 10  + a) << 4;
+         * strength = ~c & 0xffff;
+         *
+         * The following does the same but with less rounding errors:
+         */
+        *strength = ~(7720 + (rc * 30744 >> 10));
+        return 0;
+}
+
+static int drx397x_read_ucblocks(struct dvb_frontend *fe,
+                                 unsigned int *ucblocks)
+{
+        *ucblocks = 0;
+        return 0;
+}
+
+static int drx397x_sleep(struct dvb_frontend *fe)
+{
+        return 0;
+}
+
+static void drx397x_release(struct dvb_frontend *fe)
+{
+        struct drx397xD_state *s = fe->demodulator_priv;
+        printk(KERN_INFO "%s: release demodulator\n", mod_name);
+        if (s) {
+                drx_release_fw(s);
+                kfree(s);
+        }
+
+}
+
+static struct dvb_frontend_ops drx397x_ops = {
+
+        .info = {
+                 .name                  = "Micronas DRX397xD DVB-T Frontend",
+                 .type                  = FE_OFDM,
+                 .frequency_min         = 47125000,
+                 .frequency_max         = 855250000,
+                 .frequency_stepsize    = 166667,
+                 .frequency_tolerance   = 0,
+                 .caps =                                        /* 0x0C01B2EAE */
+                         FE_CAN_FEC_1_2                 |       // = 0x2,
+                         FE_CAN_FEC_2_3                 |       // = 0x4,
+                         FE_CAN_FEC_3_4                 |       // = 0x8,
+                         FE_CAN_FEC_5_6                 |       // = 0x20,
+                         FE_CAN_FEC_7_8                 |       // = 0x80,
+                         FE_CAN_FEC_AUTO                |       // = 0x200,
+                         FE_CAN_QPSK                    |       // = 0x400,
+                         FE_CAN_QAM_16                  |       // = 0x800,
+                         FE_CAN_QAM_64                  |       // = 0x2000,
+                         FE_CAN_QAM_AUTO                |       // = 0x10000,
+                         FE_CAN_TRANSMISSION_MODE_AUTO  |       // = 0x20000,
+                         FE_CAN_GUARD_INTERVAL_AUTO     |       // = 0x80000,
+                         FE_CAN_HIERARCHY_AUTO          |       // = 0x100000,
+                         FE_CAN_RECOVER                 |       // = 0x40000000,
+                         FE_CAN_MUTE_TS                         // = 0x80000000
+         },
+
+        .release = drx397x_release,
+        .init = drx397x_init,
+        .sleep = drx397x_sleep,
+
+        .set_frontend = drx397x_set_frontend,
+        .get_tune_settings = drx397x_get_tune_settings,
+        .get_frontend = drx397x_get_frontend,
+
+        .read_status = drx397x_read_status,
+        .read_snr = drx397x_read_snr,
+        .read_signal_strength = drx397x_read_signal_strength,
+        .read_ber = drx397x_read_ber,
+        .read_ucblocks = drx397x_read_ucblocks,
+};
+
+struct dvb_frontend *drx397xD_attach(const struct drx397xD_config *config,
+                                     struct i2c_adapter *i2c)
+{
+        struct drx397xD_state *s = NULL;
+
+        /* allocate memory for the internal state */
+        s = kzalloc(sizeof(struct drx397xD_state), GFP_KERNEL);
+        if (s == NULL)
+                goto error;
+
+        /* setup the state */
+        s->i2c = i2c;
+        memcpy(&s->config, config, sizeof(struct drx397xD_config));
+
+        /* check if the demod is there */
+        if (RD16(s, 0x2410019) < 0)
+                goto error;
+
+        /* create dvb_frontend */
+        memcpy(&s->frontend.ops, &drx397x_ops, sizeof(struct dvb_frontend_ops));
+        s->frontend.demodulator_priv = s;
+
+        return &s->frontend;
+      error:
+        kfree(s);
+        return NULL;
+}
+
+MODULE_DESCRIPTION("Micronas DRX397xD DVB-T Frontend");
+MODULE_AUTHOR("Henk Vergonet");
+MODULE_LICENSE("GPL");
+
+EXPORT_SYMBOL(drx397xD_attach);
diff --git a/drivers/media/dvb/frontends/drx397xD.h b/drivers/media/dvb/frontends/drx397xD.h
new file mode 100644
index 000000000000..ddc7a07971b7
--- /dev/null
+++ b/drivers/media/dvb/frontends/drx397xD.h
@@ -0,0 +1,130 @@
+/*
+ *  Driver for Micronas DVB-T drx397xD demodulator
+ *
+ *  Copyright (C) 2007 Henk vergonet <Henk.Vergonet@gmail.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.=
+ */
+
+#ifndef _DRX397XD_H_INCLUDED
+#define _DRX397XD_H_INCLUDED
+
+#include <linux/dvb/frontend.h>
+
+#define DRX_F_STEPSIZE  166667
+#define DRX_F_OFFSET    36000000
+
+#define I2C_ADR_C0(x) \
+(       (u32)cpu_to_le32( \
+                (u32)( \
+                        (((u32)(x) & (u32)0x000000ffUL)      ) | \
+                        (((u32)(x) & (u32)0x0000ff00UL) << 16) | \
+                        (((u32)(x) & (u32)0x0fff0000UL) >>  8) | \
+                         (           (u32)0x00c00000UL)          \
+                      )) \
+)
+
+#define I2C_ADR_E0(x) \
+(       (u32)cpu_to_le32( \
+                (u32)( \
+                        (((u32)(x) & (u32)0x000000ffUL)      ) | \
+                        (((u32)(x) & (u32)0x0000ff00UL) << 16) | \
+                        (((u32)(x) & (u32)0x0fff0000UL) >>  8) | \
+                         (           (u32)0x00e00000UL)          \
+                      )) \
+)
+
+struct drx397xD_CfgRfAgc        /* 0x7c */
+{
+        int d00;        /* 2 */
+        u16 w04;
+        u16 w06;
+};
+
+struct drx397xD_CfgIfAgc        /* 0x68 */
+{
+        int d00;        /* 0 */
+        u16 w04;        /* 0 */
+        u16 w06;
+        u16 w08;
+        u16 w0A;
+        u16 w0C;
+};
+
+struct drx397xD_s20 {
+        int d04;
+        u32 d18;
+        u32 d1C;
+        u32 d20;
+        u32 d14;
+        u32 d24;
+        u32 d0C;
+        u32 d08;
+};
+
+struct drx397xD_config
+{
+        /* demodulator's I2C address */
+        u8      demod_address;          /* 0x0f */
+
+        struct drx397xD_CfgIfAgc  ifagc;  /* 0x68 */
+        struct drx397xD_CfgRfAgc  rfagc;  /* 0x7c */
+        u32     s20d24;
+
+        /* HI_CfgCommand parameters */
+        u16     w50, w52, /* w54, */ w56;
+
+        int     d5C;
+        int     d60;
+        int     d48;
+        int     d28;
+
+        u32     f_if;   /* d14: intermediate frequency [Hz]             */
+                        /*      36000000 on Cinergy 2400i DT            */
+                        /*      42800000 on Pinnacle Hybrid PRO 330e    */
+
+        u16     f_osc;  /* s66: 48000 oscillator frequency [kHz]        */
+
+        u16     w92;    /* 20000 */
+
+        u16     wA0;
+        u16     w98;
+        u16     w9A;
+
+        u16     w9C;    /* 0xe0 */
+        u16     w9E;    /* 0x00 */
+
+        /* used for signal strength calculations in
+           drx397x_read_signal_strength
+        */
+        u16     ss78;   // 2200
+        u16     ss7A;   // 150
+        u16     ss76;   // 820
+};
+
+#if defined(CONFIG_DVB_DRX397XD) || (defined(CONFIG_DVB_DRX397XD_MODULE) && defined(MODULE))
+extern struct dvb_frontend* drx397xD_attach(const struct drx397xD_config *config,
+                                           struct i2c_adapter *i2c);
+#else
+static inline struct dvb_frontend* drx397xD_attach(const struct drx397xD_config *config,
+                                           struct i2c_adapter *i2c)
+{
+        printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__);
+        return NULL;
+}
+#endif /* CONFIG_DVB_DRX397XD */
+
+#endif /* _DRX397XD_H_INCLUDED */
diff --git a/drivers/media/dvb/frontends/drx397xD_fw.h b/drivers/media/dvb/frontends/drx397xD_fw.h
new file mode 100644
index 000000000000..01de02a81cd4
--- /dev/null
+++ b/drivers/media/dvb/frontends/drx397xD_fw.h
@@ -0,0 +1,40 @@
+/*
+ * Firmware definitions for Micronas drx397xD
+ *
+ * Copyright (C) 2007 Henk Vergonet <Henk.Vergonet@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifdef _FW_ENTRY
+        _FW_ENTRY("drx397xD.A2.fw",     DRXD_FW_A2 = 0          ),
+        _FW_ENTRY("drx397xD.B1.fw",     DRXD_FW_B1              ),
+#undef _FW_ENTRY
+#endif /* _FW_ENTRY */
+
+#ifdef _BLOB_ENTRY
+        _BLOB_ENTRY("InitAtomicRead",   DRXD_InitAtomicRead = 0 ),
+        _BLOB_ENTRY("InitCE",           DRXD_InitCE             ),
+        _BLOB_ENTRY("InitCP",           DRXD_InitCP             ),
+        _BLOB_ENTRY("InitEC",           DRXD_InitEC             ),
+        _BLOB_ENTRY("InitEQ",           DRXD_InitEQ             ),
+        _BLOB_ENTRY("InitFE_1",         DRXD_InitFE_1           ),
+        _BLOB_ENTRY("InitFE_2",         DRXD_InitFE_2           ),
+        _BLOB_ENTRY("InitFT",           DRXD_InitFT             ),
+        _BLOB_ENTRY("InitSC",           DRXD_InitSC             ),
+        _BLOB_ENTRY("ResetCEFR",        DRXD_ResetCEFR          ),
+        _BLOB_ENTRY("ResetECRAM",       DRXD_ResetECRAM         ),
+        _BLOB_ENTRY("microcode",        DRXD_microcode          ),
+#undef _BLOB_ENTRY
+#endif /* _BLOB_ENTRY */
diff --git a/drivers/media/dvb/frontends/z0194a.h b/drivers/media/dvb/frontends/z0194a.h
new file mode 100644
index 000000000000..d2876d2e1769
--- /dev/null
+++ b/drivers/media/dvb/frontends/z0194a.h
@@ -0,0 +1,97 @@
+/* z0194a.h Sharp z0194a tuner support
+*
+* Copyright (C) 2008 Igor M. Liplianin (liplianin@me.by)
+*
+*       This program is free software; you can redistribute it and/or modify it
+*       under the terms of the GNU General Public License as published by the
+*       Free Software Foundation, version 2.
+*
+* see Documentation/dvb/README.dvb-usb for more information
+*/
+
+#ifndef Z0194A
+#define Z0194A
+
+static int sharp_z0194a__set_symbol_rate(struct dvb_frontend *fe,
+                                         u32 srate, u32 ratio)
+{
+        u8 aclk = 0;
+        u8 bclk = 0;
+
+        if (srate < 1500000) {
+                aclk = 0xb7; bclk = 0x47; }
+        else if (srate < 3000000) {
+                aclk = 0xb7; bclk = 0x4b; }
+        else if (srate < 7000000) {
+                aclk = 0xb7; bclk = 0x4f; }
+        else if (srate < 14000000) {
+                aclk = 0xb7; bclk = 0x53; }
+        else if (srate < 30000000) {
+                aclk = 0xb6; bclk = 0x53; }
+        else if (srate < 45000000) {
+                aclk = 0xb4; bclk = 0x51; }
+
+        stv0299_writereg(fe, 0x13, aclk);
+        stv0299_writereg(fe, 0x14, bclk);
+        stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff);
+        stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff);
+        stv0299_writereg(fe, 0x21, (ratio) & 0xf0);
+
+        return 0;
+}
+
+static u8 sharp_z0194a__inittab[] = {
+        0x01, 0x15,
+        0x02, 0x00,
+        0x03, 0x00,
+        0x04, 0x7d,   /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */
+        0x05, 0x35,   /* I2CT = 0, SCLT = 1, SDAT = 1 */
+        0x06, 0x40,   /* DAC not used, set to high impendance mode */
+        0x07, 0x00,   /* DAC LSB */
+        0x08, 0x40,   /* DiSEqC off, LNB power on OP2/LOCK pin on */
+        0x09, 0x00,   /* FIFO */
+        0x0c, 0x51,   /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */
+        0x0d, 0x82,   /* DC offset compensation = ON, beta_agc1 = 2 */
+        0x0e, 0x23,   /* alpha_tmg = 2, beta_tmg = 3 */
+        0x10, 0x3f,   /* AGC2  0x3d */
+        0x11, 0x84,
+        0x12, 0xb9,
+        0x15, 0xc9,   /* lock detector threshold */
+        0x16, 0x00,
+        0x17, 0x00,
+        0x18, 0x00,
+        0x19, 0x00,
+        0x1a, 0x00,
+        0x1f, 0x50,
+        0x20, 0x00,
+        0x21, 0x00,
+        0x22, 0x00,
+        0x23, 0x00,
+        0x28, 0x00,  /* out imp: normal  out type: parallel FEC mode:0 */
+        0x29, 0x1e,  /* 1/2 threshold */
+        0x2a, 0x14,  /* 2/3 threshold */
+        0x2b, 0x0f,  /* 3/4 threshold */
+        0x2c, 0x09,  /* 5/6 threshold */
+        0x2d, 0x05,  /* 7/8 threshold */
+        0x2e, 0x01,
+        0x31, 0x1f,  /* test all FECs */
+        0x32, 0x19,  /* viterbi and synchro search */
+        0x33, 0xfc,  /* rs control */
+        0x34, 0x93,  /* error control */
+        0x0f, 0x52,
+        0xff, 0xff
+};
+
+static struct stv0299_config sharp_z0194a_config = {
+        .demod_address = 0x68,
+        .inittab = sharp_z0194a__inittab,
+        .mclk = 88000000UL,
+        .invert = 1,
+        .skip_reinit = 0,
+        .lock_output = STV0299_LOCKOUTPUT_1,
+        .volt13_op0_op1 = STV0299_VOLT13_OP1,
+        .min_delay_ms = 100,
+        .set_symbol_rate = sharp_z0194a__set_symbol_rate,
+};
+
+#endif
diff --git a/drivers/media/dvb/siano/smscoreapi.c b/drivers/media/dvb/siano/smscoreapi.c
index b4b8ed795c95..c5f45fed69dc 100644
--- a/drivers/media/dvb/siano/smscoreapi.c
+++ b/drivers/media/dvb/siano/smscoreapi.c
@@ -110,12 +110,12 @@ struct smscore_registry_entry_t {
         enum sms_device_type_st type;
 };
 
-struct list_head g_smscore_notifyees;
-struct list_head g_smscore_devices;
-struct mutex g_smscore_deviceslock;
+static struct list_head g_smscore_notifyees;
+static struct list_head g_smscore_devices;
+static struct mutex g_smscore_deviceslock;
 
-struct list_head g_smscore_registry;
-struct mutex g_smscore_registrylock;
+static struct list_head g_smscore_registry;
+static struct mutex g_smscore_registrylock;
 
 static int default_mode = 4;
 
@@ -1187,7 +1187,7 @@ int smsclient_sendrequest(struct smscore_client_t *client,
 }
 
 
-int smscore_module_init(void)
+static int __init smscore_module_init(void)
 {
         int rc = 0;
 
@@ -1209,7 +1209,7 @@ int smscore_module_init(void)
         return rc;
 }
 
-void smscore_module_exit(void)
+static void __exit smscore_module_exit(void)
 {
 
         kmutex_lock(&g_smscore_deviceslock);
diff --git a/drivers/media/dvb/siano/smsdvb.c b/drivers/media/dvb/siano/smsdvb.c
index 6f9c18563867..229274a14110 100644
--- a/drivers/media/dvb/siano/smsdvb.c
+++ b/drivers/media/dvb/siano/smsdvb.c
@@ -27,8 +27,8 @@
 
 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
 
-struct list_head g_smsdvb_clients;
-struct mutex g_smsdvb_clientslock;
+static struct list_head g_smsdvb_clients;
+static struct mutex g_smsdvb_clientslock;
 
 static int smsdvb_onresponse(void *context, struct smscore_buffer_t *cb)
 {
diff --git a/drivers/media/dvb/ttpci/Kconfig b/drivers/media/dvb/ttpci/Kconfig
index 87c973ac668b..41b5a988b619 100644
--- a/drivers/media/dvb/ttpci/Kconfig
+++ b/drivers/media/dvb/ttpci/Kconfig
@@ -5,8 +5,6 @@ config TTPCI_EEPROM
 config DVB_AV7110
         tristate "AV7110 cards"
         depends on DVB_CORE && PCI && I2C
-        depends on HOTPLUG
-        select FW_LOADER if !DVB_AV7110_FIRMWARE
         select TTPCI_EEPROM
         select VIDEO_SAA7146_VV
         depends on VIDEO_DEV    # dependencies of VIDEO_SAA7146_VV
@@ -127,14 +125,12 @@ config DVB_BUDGET_AV
         depends on DVB_BUDGET_CORE && I2C
         select VIDEO_SAA7146_VV
         depends on VIDEO_DEV    # dependencies of VIDEO_SAA7146_VV
-        depends on HOTPLUG      # dependency of FW_LOADER
         select DVB_PLL if !DVB_FE_CUSTOMISE
         select DVB_STV0299 if !DVB_FE_CUSTOMISE
         select DVB_TDA1004X if !DVB_FE_CUSTOMISE
         select DVB_TDA10021 if !DVB_FE_CUSTOMISE
         select DVB_TDA10023 if !DVB_FE_CUSTOMISE
         select DVB_TUA6100 if !DVB_FE_CUSTOMISE
-        select FW_LOADER
         help
           Support for simple SAA7146 based DVB cards
           (so called Budget- or Nova-PCI cards) without onboard
diff --git a/drivers/media/dvb/ttusb-dec/Kconfig b/drivers/media/dvb/ttusb-dec/Kconfig
index a23cc0aa17d3..d5f48a3102bd 100644
--- a/drivers/media/dvb/ttusb-dec/Kconfig
+++ b/drivers/media/dvb/ttusb-dec/Kconfig
@@ -1,8 +1,6 @@
 config DVB_TTUSB_DEC
         tristate "Technotrend/Hauppauge USB DEC devices"
         depends on DVB_CORE && USB && INPUT
-        depends on HOTPLUG      # due to FW_LOADER
-        select FW_LOADER
         select CRC32
         help
           Support for external USB adapters designed by Technotrend and
diff --git a/drivers/media/radio/dsbr100.c b/drivers/media/radio/dsbr100.c
index 4e3f83e4e48f..1ed88f3abe61 100644
--- a/drivers/media/radio/dsbr100.c
+++ b/drivers/media/radio/dsbr100.c
@@ -85,6 +85,7 @@
 #include <linux/input.h>
 #include <linux/videodev2.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <linux/usb.h>
 
 /*
@@ -444,14 +445,7 @@ static const struct file_operations usb_dsbr100_fops = {
         .llseek         = no_llseek,
 };
 
-/* V4L2 interface */
-static struct video_device dsbr100_videodev_template =
-{
-        .owner          = THIS_MODULE,
-        .name           = "D-Link DSB-R 100",
-        .type           = VID_TYPE_TUNER,
-        .fops           = &usb_dsbr100_fops,
-        .release        = video_device_release,
+static const struct v4l2_ioctl_ops usb_dsbr100_ioctl_ops = {
         .vidioc_querycap    = vidioc_querycap,
         .vidioc_g_tuner     = vidioc_g_tuner,
         .vidioc_s_tuner     = vidioc_s_tuner,
@@ -466,6 +460,14 @@ static struct video_device dsbr100_videodev_template =
         .vidioc_s_input     = vidioc_s_input,
 };
 
+/* V4L2 interface */
+static struct video_device dsbr100_videodev_template = {
+        .name           = "D-Link DSB-R 100",
+        .fops           = &usb_dsbr100_fops,
+        .ioctl_ops      = &usb_dsbr100_ioctl_ops,
+        .release        = video_device_release,
+};
+
 /* check if the device is present and register with v4l and
 usb if it is */
 static int usb_dsbr100_probe(struct usb_interface *intf,
diff --git a/drivers/media/radio/miropcm20-radio.c b/drivers/media/radio/miropcm20-radio.c
index 09fe6f1cdf14..7fd7ee2d32c1 100644
--- a/drivers/media/radio/miropcm20-radio.c
+++ b/drivers/media/radio/miropcm20-radio.c
@@ -23,6 +23,7 @@
 #include <linux/init.h>
 #include <linux/videodev.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include "oss/aci.h"
 #include "miropcm20-rds-core.h"
 
@@ -228,9 +229,7 @@ static const struct file_operations pcm20_fops = {
 };
 
 static struct video_device pcm20_radio = {
-        .owner          = THIS_MODULE,
         .name           = "Miro PCM 20 radio",
-        .type           = VID_TYPE_TUNER,
         .fops           = &pcm20_fops,
         .priv           = &pcm20_unit
 };
diff --git a/drivers/media/radio/radio-aimslab.c b/drivers/media/radio/radio-aimslab.c
index 1ec18ed1a733..eba9209b3024 100644
--- a/drivers/media/radio/radio-aimslab.c
+++ b/drivers/media/radio/radio-aimslab.c
@@ -36,6 +36,7 @@
 #include <asm/uaccess.h>        /* copy to/from user            */
 #include <linux/videodev2.h>    /* kernel radio structs         */
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 
 #include <linux/version.h>      /* for KERNEL_VERSION MACRO     */
 #define RADIO_VERSION KERNEL_VERSION(0,0,2)
@@ -388,12 +389,7 @@ static const struct file_operations rtrack_fops = {
         .llseek         = no_llseek,
 };
 
-static struct video_device rtrack_radio=
-{
-        .owner          = THIS_MODULE,
-        .name           = "RadioTrack radio",
-        .type           = VID_TYPE_TUNER,
-        .fops           = &rtrack_fops,
+static const struct v4l2_ioctl_ops rtrack_ioctl_ops = {
         .vidioc_querycap    = vidioc_querycap,
         .vidioc_g_tuner     = vidioc_g_tuner,
         .vidioc_s_tuner     = vidioc_s_tuner,
@@ -408,6 +404,12 @@ static struct video_device rtrack_radio=
         .vidioc_s_ctrl      = vidioc_s_ctrl,
 };
 
+static struct video_device rtrack_radio = {
+        .name           = "RadioTrack radio",
+        .fops           = &rtrack_fops,
+        .ioctl_ops      = &rtrack_ioctl_ops,
+};
+
 static int __init rtrack_init(void)
 {
         if(io==-1)
diff --git a/drivers/media/radio/radio-aztech.c b/drivers/media/radio/radio-aztech.c
index 46cdb549eac7..3fe5504428c5 100644
--- a/drivers/media/radio/radio-aztech.c
+++ b/drivers/media/radio/radio-aztech.c
@@ -33,6 +33,7 @@
 #include <asm/uaccess.h>        /* copy to/from user            */
 #include <linux/videodev2.h>    /* kernel radio structs         */
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 
 #include <linux/version.h>      /* for KERNEL_VERSION MACRO     */
 #define RADIO_VERSION KERNEL_VERSION(0,0,2)
@@ -352,12 +353,7 @@ static const struct file_operations aztech_fops = {
         .llseek         = no_llseek,
 };
 
-static struct video_device aztech_radio=
-{
-        .owner              = THIS_MODULE,
-        .name               = "Aztech radio",
-        .type               = VID_TYPE_TUNER,
-        .fops               = &aztech_fops,
+static const struct v4l2_ioctl_ops aztech_ioctl_ops = {
         .vidioc_querycap    = vidioc_querycap,
         .vidioc_g_tuner     = vidioc_g_tuner,
         .vidioc_s_tuner     = vidioc_s_tuner,
@@ -372,6 +368,12 @@ static struct video_device aztech_radio=
         .vidioc_s_ctrl      = vidioc_s_ctrl,
 };
 
+static struct video_device aztech_radio = {
+        .name               = "Aztech radio",
+        .fops               = &aztech_fops,
+        .ioctl_ops          = &aztech_ioctl_ops,
+};
+
 module_param_named(debug,aztech_radio.debug, int, 0644);
 MODULE_PARM_DESC(debug,"activates debug info");
 
diff --git a/drivers/media/radio/radio-cadet.c b/drivers/media/radio/radio-cadet.c
index b14db53ea456..6166e726ed72 100644
--- a/drivers/media/radio/radio-cadet.c
+++ b/drivers/media/radio/radio-cadet.c
@@ -39,6 +39,7 @@
 #include <asm/uaccess.h>        /* copy to/from user            */
 #include <linux/videodev2.h>    /* V4L2 API defs                */
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <linux/param.h>
 #include <linux/pnp.h>
 
@@ -569,12 +570,7 @@ static const struct file_operations cadet_fops = {
         .llseek         = no_llseek,
 };
 
-static struct video_device cadet_radio=
-{
-        .owner          = THIS_MODULE,
-        .name           = "Cadet radio",
-        .type           = VID_TYPE_TUNER,
-        .fops           = &cadet_fops,
+static const struct v4l2_ioctl_ops cadet_ioctl_ops = {
         .vidioc_querycap    = vidioc_querycap,
         .vidioc_g_tuner     = vidioc_g_tuner,
         .vidioc_s_tuner     = vidioc_s_tuner,
@@ -589,6 +585,12 @@ static struct video_device cadet_radio=
         .vidioc_s_input     = vidioc_s_input,
 };
 
+static struct video_device cadet_radio = {
+        .name           = "Cadet radio",
+        .fops           = &cadet_fops,
+        .ioctl_ops      = &cadet_ioctl_ops,
+};
+
 #ifdef CONFIG_PNP
 
 static struct pnp_device_id cadet_pnp_devices[] = {
diff --git a/drivers/media/radio/radio-gemtek-pci.c b/drivers/media/radio/radio-gemtek-pci.c
index de49be971480..36e754e3ffb2 100644
--- a/drivers/media/radio/radio-gemtek-pci.c
+++ b/drivers/media/radio/radio-gemtek-pci.c
@@ -46,6 +46,7 @@
 #include <linux/pci.h>
 #include <linux/videodev2.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <linux/errno.h>
 
 #include <linux/version.h>      /* for KERNEL_VERSION MACRO     */
@@ -374,11 +375,7 @@ static const struct file_operations gemtek_pci_fops = {
         .llseek         = no_llseek,
 };
 
-static struct video_device vdev_template = {
-        .owner         = THIS_MODULE,
-        .name          = "Gemtek PCI Radio",
-        .type          = VID_TYPE_TUNER,
-        .fops          = &gemtek_pci_fops,
+static const struct v4l2_ioctl_ops gemtek_pci_ioctl_ops = {
         .vidioc_querycap    = vidioc_querycap,
         .vidioc_g_tuner     = vidioc_g_tuner,
         .vidioc_s_tuner     = vidioc_s_tuner,
@@ -393,6 +390,12 @@ static struct video_device vdev_template = {
         .vidioc_s_ctrl      = vidioc_s_ctrl,
 };
 
+static struct video_device vdev_template = {
+        .name          = "Gemtek PCI Radio",
+        .fops          = &gemtek_pci_fops,
+        .ioctl_ops     = &gemtek_pci_ioctl_ops,
+};
+
 static int __devinit gemtek_pci_probe( struct pci_dev *pci_dev, const struct pci_device_id *pci_id )
 {
         struct gemtek_pci_card *card;
diff --git a/drivers/media/radio/radio-gemtek.c b/drivers/media/radio/radio-gemtek.c
index 81f6aeb1cd11..2b1a6221de6d 100644
--- a/drivers/media/radio/radio-gemtek.c
+++ b/drivers/media/radio/radio-gemtek.c
@@ -23,6 +23,7 @@
 #include <asm/io.h>             /* outb, outb_p                 */
 #include <asm/uaccess.h>        /* copy to/from user            */
 #include <linux/videodev2.h>    /* kernel radio structs         */
+#include <media/v4l2-ioctl.h>
 #include <media/v4l2-common.h>
 #include <linux/spinlock.h>
 
@@ -552,11 +553,7 @@ static int vidioc_s_audio(struct file *file, void *priv, struct v4l2_audio *a)
         return 0;
 }
 
-static struct video_device gemtek_radio = {
-        .owner                  = THIS_MODULE,
-        .name                   = "GemTek Radio card",
-        .type                   = VID_TYPE_TUNER,
-        .fops                   = &gemtek_fops,
+static const struct v4l2_ioctl_ops gemtek_ioctl_ops = {
         .vidioc_querycap        = vidioc_querycap,
         .vidioc_g_tuner         = vidioc_g_tuner,
         .vidioc_s_tuner         = vidioc_s_tuner,
@@ -571,6 +568,12 @@ static struct video_device gemtek_radio = {
         .vidioc_s_ctrl          = vidioc_s_ctrl
 };
 
+static struct video_device gemtek_radio = {
+        .name                   = "GemTek Radio card",
+        .fops                   = &gemtek_fops,
+        .ioctl_ops              = &gemtek_ioctl_ops,
+};
+
 /*
  * Initialization / cleanup related stuff.
  */
diff --git a/drivers/media/radio/radio-maestro.c b/drivers/media/radio/radio-maestro.c
index bddd3c409aa9..0ada1c697e8a 100644
--- a/drivers/media/radio/radio-maestro.c
+++ b/drivers/media/radio/radio-maestro.c
@@ -27,6 +27,7 @@
 #include <linux/pci.h>
 #include <linux/videodev2.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 
 #include <linux/version.h>      /* for KERNEL_VERSION MACRO     */
 #define RADIO_VERSION KERNEL_VERSION(0,0,6)
@@ -354,10 +355,7 @@ static u16 __devinit radio_power_on(struct radio_device *dev)
         return (ofreq == radio_bits_get(dev));
 }
 
-static struct video_device maestro_radio = {
-        .name           = "Maestro radio",
-        .type           = VID_TYPE_TUNER,
-        .fops           = &maestro_fops,
+static const struct v4l2_ioctl_ops maestro_ioctl_ops = {
         .vidioc_querycap    = vidioc_querycap,
         .vidioc_g_tuner     = vidioc_g_tuner,
         .vidioc_s_tuner     = vidioc_s_tuner,
@@ -372,6 +370,12 @@ static struct video_device maestro_radio = {
         .vidioc_s_ctrl      = vidioc_s_ctrl,
 };
 
+static struct video_device maestro_radio = {
+        .name           = "Maestro radio",
+        .fops           = &maestro_fops,
+        .ioctl_ops      = &maestro_ioctl_ops,
+};
+
 static int __devinit maestro_probe(struct pci_dev *pdev,
         const struct pci_device_id *ent)
 {
diff --git a/drivers/media/radio/radio-maxiradio.c b/drivers/media/radio/radio-maxiradio.c
index 0133ecf3e040..43c75497dc49 100644
--- a/drivers/media/radio/radio-maxiradio.c
+++ b/drivers/media/radio/radio-maxiradio.c
@@ -44,6 +44,7 @@
 #include <linux/pci.h>
 #include <linux/videodev2.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 
 #define DRIVER_VERSION  "0.77"
 
@@ -373,13 +374,7 @@ static int vidioc_s_ctrl (struct file *file, void *priv,
         return -EINVAL;
 }
 
-static struct video_device maxiradio_radio =
-{
-        .owner              = THIS_MODULE,
-        .name               = "Maxi Radio FM2000 radio",
-        .type               = VID_TYPE_TUNER,
-        .fops               = &maxiradio_fops,
-
+static const struct v4l2_ioctl_ops maxiradio_ioctl_ops = {
         .vidioc_querycap    = vidioc_querycap,
         .vidioc_g_tuner     = vidioc_g_tuner,
         .vidioc_s_tuner     = vidioc_s_tuner,
@@ -394,6 +389,12 @@ static struct video_device maxiradio_radio =
         .vidioc_s_ctrl      = vidioc_s_ctrl,
 };
 
+static struct video_device maxiradio_radio = {
+        .name               = "Maxi Radio FM2000 radio",
+        .fops               = &maxiradio_fops,
+        .ioctl_ops          = &maxiradio_ioctl_ops,
+};
+
 static int __devinit maxiradio_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
         if(!request_region(pci_resource_start(pdev, 0),
diff --git a/drivers/media/radio/radio-rtrack2.c b/drivers/media/radio/radio-rtrack2.c
index 070802103dc3..e2dde0807268 100644
--- a/drivers/media/radio/radio-rtrack2.c
+++ b/drivers/media/radio/radio-rtrack2.c
@@ -17,6 +17,7 @@
 #include <asm/uaccess.h>        /* copy to/from user            */
 #include <linux/videodev2.h>    /* kernel radio structs         */
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <linux/spinlock.h>
 
 #include <linux/version.h>      /* for KERNEL_VERSION MACRO     */
@@ -294,12 +295,7 @@ static const struct file_operations rtrack2_fops = {
         .llseek         = no_llseek,
 };
 
-static struct video_device rtrack2_radio=
-{
-        .owner          = THIS_MODULE,
-        .name           = "RadioTrack II radio",
-        .type           = VID_TYPE_TUNER,
-        .fops           = &rtrack2_fops,
+static const struct v4l2_ioctl_ops rtrack2_ioctl_ops = {
         .vidioc_querycap    = vidioc_querycap,
         .vidioc_g_tuner     = vidioc_g_tuner,
         .vidioc_s_tuner     = vidioc_s_tuner,
@@ -314,6 +310,12 @@ static struct video_device rtrack2_radio=
         .vidioc_s_input     = vidioc_s_input,
 };
 
+static struct video_device rtrack2_radio = {
+        .name           = "RadioTrack II radio",
+        .fops           = &rtrack2_fops,
+        .ioctl_ops      = &rtrack2_ioctl_ops,
+};
+
 static int __init rtrack2_init(void)
 {
         if(io==-1)
diff --git a/drivers/media/radio/radio-sf16fmi.c b/drivers/media/radio/radio-sf16fmi.c
index 66e052fd3909..bb5d92f104af 100644
--- a/drivers/media/radio/radio-sf16fmi.c
+++ b/drivers/media/radio/radio-sf16fmi.c
@@ -24,6 +24,7 @@
 #include <linux/delay.h>        /* udelay                       */
 #include <linux/videodev2.h>    /* kernel radio structs         */
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <linux/isapnp.h>
 #include <asm/io.h>             /* outb, outb_p                 */
 #include <asm/uaccess.h>        /* copy to/from user            */
@@ -294,12 +295,7 @@ static const struct file_operations fmi_fops = {
         .llseek         = no_llseek,
 };
 
-static struct video_device fmi_radio=
-{
-        .owner          = THIS_MODULE,
-        .name           = "SF16FMx radio",
-        .type           = VID_TYPE_TUNER,
-        .fops           = &fmi_fops,
+static const struct v4l2_ioctl_ops fmi_ioctl_ops = {
         .vidioc_querycap    = vidioc_querycap,
         .vidioc_g_tuner     = vidioc_g_tuner,
         .vidioc_s_tuner     = vidioc_s_tuner,
@@ -314,6 +310,12 @@ static struct video_device fmi_radio=
         .vidioc_s_ctrl      = vidioc_s_ctrl,
 };
 
+static struct video_device fmi_radio = {
+        .name           = "SF16FMx radio",
+        .fops           = &fmi_fops,
+        .ioctl_ops      = &fmi_ioctl_ops,
+};
+
 /* ladis: this is my card. does any other types exist? */
 static struct isapnp_device_id id_table[] __devinitdata = {
         {       ISAPNP_ANY_ID, ISAPNP_ANY_ID,
diff --git a/drivers/media/radio/radio-sf16fmr2.c b/drivers/media/radio/radio-sf16fmr2.c
index b0ccf7cb5952..6290553d24be 100644
--- a/drivers/media/radio/radio-sf16fmr2.c
+++ b/drivers/media/radio/radio-sf16fmr2.c
@@ -22,6 +22,7 @@
 #include <asm/uaccess.h>        /* copy to/from user            */
 #include <linux/videodev2.h>    /* kernel radio structs         */
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <linux/mutex.h>
 
 static struct mutex lock;
@@ -410,12 +411,7 @@ static const struct file_operations fmr2_fops = {
         .llseek         = no_llseek,
 };
 
-static struct video_device fmr2_radio=
-{
-        .owner          = THIS_MODULE,
-        .name           = "SF16FMR2 radio",
-        . type          = VID_TYPE_TUNER,
-        .fops           = &fmr2_fops,
+static const struct v4l2_ioctl_ops fmr2_ioctl_ops = {
         .vidioc_querycap    = vidioc_querycap,
         .vidioc_g_tuner     = vidioc_g_tuner,
         .vidioc_s_tuner     = vidioc_s_tuner,
@@ -430,6 +426,12 @@ static struct video_device fmr2_radio=
         .vidioc_s_ctrl      = vidioc_s_ctrl,
 };
 
+static struct video_device fmr2_radio = {
+        .name           = "SF16FMR2 radio",
+        .fops           = &fmr2_fops,
+        .ioctl_ops      = &fmr2_ioctl_ops,
+};
+
 static int __init fmr2_init(void)
 {
         fmr2_unit.port = io;
diff --git a/drivers/media/radio/radio-si470x.c b/drivers/media/radio/radio-si470x.c
index dc93a882b385..a4984ff87c9c 100644
--- a/drivers/media/radio/radio-si470x.c
+++ b/drivers/media/radio/radio-si470x.c
@@ -133,6 +133,7 @@
 #include <linux/videodev2.h>
 #include <linux/mutex.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <media/rds.h>
 #include <asm/unaligned.h>
 
@@ -1585,15 +1586,7 @@ done:
         return retval;
 }
 
-
-/*
- * si470x_viddev_tamples - video device interface
- */
-static struct video_device si470x_viddev_template = {
-        .fops                   = &si470x_fops,
-        .name                   = DRIVER_NAME,
-        .type                   = VID_TYPE_TUNER,
-        .release                = video_device_release,
+static const struct v4l2_ioctl_ops si470x_ioctl_ops = {
         .vidioc_querycap        = si470x_vidioc_querycap,
         .vidioc_g_input         = si470x_vidioc_g_input,
         .vidioc_s_input         = si470x_vidioc_s_input,
@@ -1607,7 +1600,16 @@ static struct video_device si470x_viddev_template = {
         .vidioc_g_frequency     = si470x_vidioc_g_frequency,
         .vidioc_s_frequency     = si470x_vidioc_s_frequency,
         .vidioc_s_hw_freq_seek  = si470x_vidioc_s_hw_freq_seek,
-        .owner                  = THIS_MODULE,
+};
+
+/*
+ * si470x_viddev_tamples - video device interface
+ */
+static struct video_device si470x_viddev_template = {
+        .fops                   = &si470x_fops,
+        .ioctl_ops              = &si470x_ioctl_ops,
+        .name                   = DRIVER_NAME,
+        .release                = video_device_release,
 };
 
 
diff --git a/drivers/media/radio/radio-terratec.c b/drivers/media/radio/radio-terratec.c
index acc32080e9bd..cefa44fc5aed 100644
--- a/drivers/media/radio/radio-terratec.c
+++ b/drivers/media/radio/radio-terratec.c
@@ -32,6 +32,7 @@
 #include <asm/uaccess.h>        /* copy to/from user            */
 #include <linux/videodev2.h>    /* kernel radio structs         */
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <linux/spinlock.h>
 
 #include <linux/version.h>      /* for KERNEL_VERSION MACRO     */
@@ -366,12 +367,7 @@ static const struct file_operations terratec_fops = {
         .llseek         = no_llseek,
 };
 
-static struct video_device terratec_radio=
-{
-        .owner          = THIS_MODULE,
-        .name           = "TerraTec ActiveRadio",
-        .type           = VID_TYPE_TUNER,
-        .fops           = &terratec_fops,
+static const struct v4l2_ioctl_ops terratec_ioctl_ops = {
         .vidioc_querycap    = vidioc_querycap,
         .vidioc_g_tuner     = vidioc_g_tuner,
         .vidioc_s_tuner     = vidioc_s_tuner,
@@ -386,6 +382,12 @@ static struct video_device terratec_radio=
         .vidioc_s_input     = vidioc_s_input,
 };
 
+static struct video_device terratec_radio = {
+        .name           = "TerraTec ActiveRadio",
+        .fops           = &terratec_fops,
+        .ioctl_ops      = &terratec_ioctl_ops,
+};
+
 static int __init terratec_init(void)
 {
         if(io==-1)
diff --git a/drivers/media/radio/radio-trust.c b/drivers/media/radio/radio-trust.c
index 4ebdfbadeb9c..d70172d23edb 100644
--- a/drivers/media/radio/radio-trust.c
+++ b/drivers/media/radio/radio-trust.c
@@ -23,6 +23,7 @@
 #include <asm/uaccess.h>
 #include <linux/videodev2.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 
 #include <linux/version.h>      /* for KERNEL_VERSION MACRO     */
 #define RADIO_VERSION KERNEL_VERSION(0,0,2)
@@ -346,12 +347,7 @@ static const struct file_operations trust_fops = {
         .llseek         = no_llseek,
 };
 
-static struct video_device trust_radio=
-{
-        .owner          = THIS_MODULE,
-        .name           = "Trust FM Radio",
-        .type           = VID_TYPE_TUNER,
-        .fops           = &trust_fops,
+static const struct v4l2_ioctl_ops trust_ioctl_ops = {
         .vidioc_querycap    = vidioc_querycap,
         .vidioc_g_tuner     = vidioc_g_tuner,
         .vidioc_s_tuner     = vidioc_s_tuner,
@@ -366,6 +362,12 @@ static struct video_device trust_radio=
         .vidioc_s_input     = vidioc_s_input,
 };
 
+static struct video_device trust_radio = {
+        .name           = "Trust FM Radio",
+        .fops           = &trust_fops,
+        .ioctl_ops      = &trust_ioctl_ops,
+};
+
 static int __init trust_init(void)
 {
         if(io == -1) {
diff --git a/drivers/media/radio/radio-typhoon.c b/drivers/media/radio/radio-typhoon.c
index 18f2abd7e255..f8d62cfea774 100644
--- a/drivers/media/radio/radio-typhoon.c
+++ b/drivers/media/radio/radio-typhoon.c
@@ -40,6 +40,7 @@
 #include <asm/uaccess.h>        /* copy to/from user              */
 #include <linux/videodev2.h>    /* kernel radio structs           */
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 
 #include <linux/version.h>      /* for KERNEL_VERSION MACRO     */
 #define RADIO_VERSION KERNEL_VERSION(0,1,1)
@@ -344,12 +345,7 @@ static const struct file_operations typhoon_fops = {
         .llseek         = no_llseek,
 };
 
-static struct video_device typhoon_radio =
-{
-        .owner          = THIS_MODULE,
-        .name           = "Typhoon Radio",
-        .type           = VID_TYPE_TUNER,
-        .fops           = &typhoon_fops,
+static const struct v4l2_ioctl_ops typhoon_ioctl_ops = {
         .vidioc_querycap    = vidioc_querycap,
         .vidioc_g_tuner     = vidioc_g_tuner,
         .vidioc_s_tuner     = vidioc_s_tuner,
@@ -364,6 +360,12 @@ static struct video_device typhoon_radio =
         .vidioc_s_ctrl      = vidioc_s_ctrl,
 };
 
+static struct video_device typhoon_radio = {
+        .name           = "Typhoon Radio",
+        .fops           = &typhoon_fops,
+        .ioctl_ops      = &typhoon_ioctl_ops,
+};
+
 #ifdef CONFIG_RADIO_TYPHOON_PROC_FS
 
 static int typhoon_proc_show(struct seq_file *m, void *v)
diff --git a/drivers/media/radio/radio-zoltrix.c b/drivers/media/radio/radio-zoltrix.c
index 43773c56c62f..9f17a332fa11 100644
--- a/drivers/media/radio/radio-zoltrix.c
+++ b/drivers/media/radio/radio-zoltrix.c
@@ -37,6 +37,7 @@
 #include <asm/uaccess.h>        /* copy to/from user              */
 #include <linux/videodev2.h>    /* kernel radio structs           */
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 
 #include <linux/version.h>      /* for KERNEL_VERSION MACRO     */
 #define RADIO_VERSION KERNEL_VERSION(0,0,2)
@@ -407,12 +408,7 @@ static const struct file_operations zoltrix_fops =
         .llseek         = no_llseek,
 };
 
-static struct video_device zoltrix_radio =
-{
-        .owner          = THIS_MODULE,
-        .name           = "Zoltrix Radio Plus",
-        .type           = VID_TYPE_TUNER,
-        .fops           = &zoltrix_fops,
+static const struct v4l2_ioctl_ops zoltrix_ioctl_ops = {
         .vidioc_querycap    = vidioc_querycap,
         .vidioc_g_tuner     = vidioc_g_tuner,
         .vidioc_s_tuner     = vidioc_s_tuner,
@@ -427,6 +423,12 @@ static struct video_device zoltrix_radio =
         .vidioc_s_ctrl      = vidioc_s_ctrl,
 };
 
+static struct video_device zoltrix_radio = {
+        .name           = "Zoltrix Radio Plus",
+        .fops           = &zoltrix_fops,
+        .ioctl_ops      = &zoltrix_ioctl_ops,
+};
+
 static int __init zoltrix_init(void)
 {
         if (io == -1) {
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index f606d2951fde..d4a6e56a7135 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -487,17 +487,6 @@ config VIDEO_PMS
           To compile this driver as a module, choose M here: the
           module will be called pms.
 
-config VIDEO_PLANB
-        tristate "PlanB Video-In on PowerMac"
-        depends on PPC_PMAC && VIDEO_V4L1 && BROKEN
-        help
-          PlanB is the V4L driver for the PowerMac 7x00/8x00 series video
-          input hardware. If you want to experiment with this, say Y.
-          Otherwise, or if you don't understand a word, say N. See
-          <http://www.cpu.lu/~mlan/linux/dev/planb.html> for more info.
-
-          Saying M will compile this driver as a module (planb).
-
 config VIDEO_BWQCAM
         tristate "Quickcam BW Video For Linux"
         depends on PARPORT && VIDEO_V4L1
@@ -806,13 +795,7 @@ menuconfig V4L_USB_DRIVERS
 
 if V4L_USB_DRIVERS && USB
 
-config USB_VIDEO_CLASS
-        tristate "USB Video Class (UVC)"
-        ---help---
-          Support for the USB Video Class (UVC).  Currently only video
-          input devices, such as webcams, are supported.
-
-          For more information see: <http://linux-uvc.berlios.de/>
+source "drivers/media/video/uvc/Kconfig"
 
 source "drivers/media/video/gspca/Kconfig"
 
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index 45d5db5abb1e..bbc6f8b82297 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -10,6 +10,8 @@ msp3400-objs	:=	msp3400-driver.o msp3400-kthreads.o
 
 stkwebcam-objs  :=      stk-webcam.o stk-sensor.o
 
+videodev-objs   :=      v4l2-dev.o v4l2-ioctl.o
+
 obj-$(CONFIG_VIDEO_DEV) += videodev.o compat_ioctl32.o v4l2-int-device.o
 
 obj-$(CONFIG_VIDEO_V4L2_COMMON) += v4l2-common.o
@@ -55,7 +57,6 @@ obj-$(CONFIG_VIDEO_ZORAN_DC30) += zr36050.o zr36016.o
 obj-$(CONFIG_VIDEO_ZORAN_ZR36060) += zr36060.o
 
 obj-$(CONFIG_VIDEO_PMS) += pms.o
-obj-$(CONFIG_VIDEO_PLANB) += planb.o
 obj-$(CONFIG_VIDEO_VINO) += vino.o indycam.o
 obj-$(CONFIG_VIDEO_STRADIS) += stradis.o
 obj-$(CONFIG_VIDEO_CPIA) += cpia.o
diff --git a/drivers/media/video/arv.c b/drivers/media/video/arv.c
index 8c7d1958856b..56ebfd5ef6fa 100644
--- a/drivers/media/video/arv.c
+++ b/drivers/media/video/arv.c
@@ -754,7 +754,6 @@ static const struct file_operations ar_fops = {
 };
 
 static struct video_device ar_template = {
-        .owner          = THIS_MODULE,
         .name           = "Colour AR VGA",
         .type           = VID_TYPE_CAPTURE,
         .fops           = &ar_fops,
diff --git a/drivers/media/video/au0828/Kconfig b/drivers/media/video/au0828/Kconfig
index 52b2491581a8..ed9a50f189fc 100644
--- a/drivers/media/video/au0828/Kconfig
+++ b/drivers/media/video/au0828/Kconfig
@@ -6,6 +6,7 @@ config VIDEO_AU0828
         select VIDEO_TVEEPROM
         select DVB_AU8522 if !DVB_FE_CUSTOMIZE
         select MEDIA_TUNER_XC5000 if !DVB_FE_CUSTOMIZE
+        select MEDIA_TUNER_MXL5007T if !DVB_FE_CUSTOMIZE
         ---help---
           This is a video4linux driver for Auvitek's USB device.
 
diff --git a/drivers/media/video/au0828/au0828-cards.c b/drivers/media/video/au0828/au0828-cards.c
index 898e12395e7c..443e59009762 100644
--- a/drivers/media/video/au0828/au0828-cards.c
+++ b/drivers/media/video/au0828/au0828-cards.c
@@ -32,6 +32,9 @@ struct au0828_board au0828_boards[] = {
         [AU0828_BOARD_HAUPPAUGE_HVR950Q] = {
                 .name   = "Hauppauge HVR950Q",
         },
+        [AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL] = {
+                .name   = "Hauppauge HVR950Q rev xxF8",
+        },
         [AU0828_BOARD_DVICO_FUSIONHDTV7] = {
                 .name   = "DViCO FusionHDTV USB",
         },
@@ -49,6 +52,7 @@ int au0828_tuner_callback(void *priv, int command, int arg)
         switch (dev->board) {
         case AU0828_BOARD_HAUPPAUGE_HVR850:
         case AU0828_BOARD_HAUPPAUGE_HVR950Q:
+        case AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL:
         case AU0828_BOARD_DVICO_FUSIONHDTV7:
                 if (command == 0) {
                         /* Tuner Reset Command from xc5000 */
@@ -110,6 +114,7 @@ void au0828_card_setup(struct au0828_dev *dev)
         switch (dev->board) {
         case AU0828_BOARD_HAUPPAUGE_HVR850:
         case AU0828_BOARD_HAUPPAUGE_HVR950Q:
+        case AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL:
                 if (dev->i2c_rc == 0)
                         hauppauge_eeprom(dev, eeprom+0xa0);
                 break;
@@ -128,6 +133,7 @@ void au0828_gpio_setup(struct au0828_dev *dev)
         switch (dev->board) {
         case AU0828_BOARD_HAUPPAUGE_HVR850:
         case AU0828_BOARD_HAUPPAUGE_HVR950Q:
+        case AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL:
                 /* GPIO's
                  * 4 - CS5340
                  * 5 - AU8522 Demodulator
@@ -193,6 +199,12 @@ struct usb_device_id au0828_usb_id_table [] = {
                 .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
         { USB_DEVICE(0x0fd9, 0x0008),
                 .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
+        { USB_DEVICE(0x2040, 0x7201),
+                .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL },
+        { USB_DEVICE(0x2040, 0x7211),
+                .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL },
+        { USB_DEVICE(0x2040, 0x7281),
+                .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL },
         { },
 };
 
diff --git a/drivers/media/video/au0828/au0828-cards.h b/drivers/media/video/au0828/au0828-cards.h
index e26f54a961d0..c37f5fd0fa80 100644
--- a/drivers/media/video/au0828/au0828-cards.h
+++ b/drivers/media/video/au0828/au0828-cards.h
@@ -23,3 +23,4 @@
 #define AU0828_BOARD_HAUPPAUGE_HVR950Q  1
 #define AU0828_BOARD_HAUPPAUGE_HVR850   2
 #define AU0828_BOARD_DVICO_FUSIONHDTV7  3
+#define AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL      4
diff --git a/drivers/media/video/au0828/au0828-dvb.c b/drivers/media/video/au0828/au0828-dvb.c
index c6d470590380..584a83a94a2a 100644
--- a/drivers/media/video/au0828/au0828-dvb.c
+++ b/drivers/media/video/au0828/au0828-dvb.c
@@ -28,6 +28,7 @@
 #include "au0828.h"
 #include "au8522.h"
 #include "xc5000.h"
+#include "mxl5007t.h"
 
 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
 
@@ -45,6 +46,11 @@ static struct xc5000_config hauppauge_hvr950q_tunerconfig = {
         .tuner_callback   = au0828_tuner_callback
 };
 
+static struct mxl5007t_config mxl5007t_hvr950q_config = {
+        .xtal_freq_hz = MxL_XTAL_24_MHZ,
+        .if_freq_hz = MxL_IF_6_MHZ,
+};
+
 /*-------------------------------------------------------------------*/
 static void urb_completion(struct urb *purb)
 {
@@ -342,6 +348,15 @@ int au0828_dvb_register(struct au0828_dev *dev)
                                 &dev->i2c_adap,
                                 &hauppauge_hvr950q_tunerconfig, dev);
                 break;
+        case AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL:
+                dvb->frontend = dvb_attach(au8522_attach,
+                                &hauppauge_hvr950q_config,
+                                &dev->i2c_adap);
+                if (dvb->frontend != NULL)
+                        dvb_attach(mxl5007t_attach, dvb->frontend,
+                                   &dev->i2c_adap, 0x60,
+                                   &mxl5007t_hvr950q_config);
+                break;
         default:
                 printk(KERN_WARNING "The frontend of your DVB/ATSC card "
                        "isn't supported yet\n");
diff --git a/drivers/media/video/bt8xx/Kconfig b/drivers/media/video/bt8xx/Kconfig
index 24a34fc1f2b3..ce71e8e7b835 100644
--- a/drivers/media/video/bt8xx/Kconfig
+++ b/drivers/media/video/bt8xx/Kconfig
@@ -1,9 +1,7 @@
 config VIDEO_BT848
         tristate "BT848 Video For Linux"
         depends on VIDEO_DEV && PCI && I2C && VIDEO_V4L2 && INPUT
-        depends on HOTPLUG      # due to FW_LOADER
         select I2C_ALGOBIT
-        select FW_LOADER
         select VIDEO_BTCX
         select VIDEOBUF_DMA_SG
         select VIDEO_IR
diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c
index 0ea559a7fe59..85bf31ab8789 100644
--- a/drivers/media/video/bt8xx/bttv-driver.c
+++ b/drivers/media/video/bt8xx/bttv-driver.c
@@ -45,6 +45,7 @@
 #include <linux/kdev_t.h>
 #include "bttvp.h"
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <media/tvaudio.h>
 #include <media/msp3400.h>
 
@@ -163,8 +164,8 @@ MODULE_LICENSE("GPL");
 static ssize_t show_card(struct device *cd,
                          struct device_attribute *attr, char *buf)
 {
-        struct video_device *vfd = container_of(cd, struct video_device, class_dev);
-        struct bttv *btv = dev_get_drvdata(vfd->dev);
+        struct video_device *vfd = container_of(cd, struct video_device, dev);
+        struct bttv *btv = dev_get_drvdata(vfd->parent);
         return sprintf(buf, "%d\n", btv ? btv->c.type : UNSET);
 }
 static DEVICE_ATTR(card, S_IRUGO, show_card, NULL);
@@ -3357,10 +3358,7 @@ static const struct file_operations bttv_fops =
         .poll     = bttv_poll,
 };
 
-static struct video_device bttv_video_template =
-{
-        .fops     = &bttv_fops,
-        .minor    = -1,
+static const struct v4l2_ioctl_ops bttv_ioctl_ops = {
         .vidioc_querycap                = bttv_querycap,
         .vidioc_enum_fmt_vid_cap        = bttv_enum_fmt_vid_cap,
         .vidioc_g_fmt_vid_cap           = bttv_g_fmt_vid_cap,
@@ -3411,8 +3409,14 @@ static struct video_device bttv_video_template =
         .vidioc_g_register              = bttv_g_register,
         .vidioc_s_register              = bttv_s_register,
 #endif
-        .tvnorms                        = BTTV_NORMS,
-        .current_norm                   = V4L2_STD_PAL,
+};
+
+static struct video_device bttv_video_template = {
+        .fops         = &bttv_fops,
+        .minor        = -1,
+        .ioctl_ops    = &bttv_ioctl_ops,
+        .tvnorms      = BTTV_NORMS,
+        .current_norm = V4L2_STD_PAL,
 };
 
 /* ----------------------------------------------------------------------- */
@@ -3635,10 +3639,7 @@ static const struct file_operations radio_fops =
         .poll     = radio_poll,
 };
 
-static struct video_device radio_template =
-{
-        .fops     = &radio_fops,
-        .minor    = -1,
+static const struct v4l2_ioctl_ops radio_ioctl_ops = {
         .vidioc_querycap        = radio_querycap,
         .vidioc_g_tuner         = radio_g_tuner,
         .vidioc_enum_input      = radio_enum_input,
@@ -3655,6 +3656,12 @@ static struct video_device radio_template =
         .vidioc_s_frequency     = bttv_s_frequency,
 };
 
+static struct video_device radio_template = {
+        .fops      = &radio_fops,
+        .minor     = -1,
+        .ioctl_ops = &radio_ioctl_ops,
+};
+
 /* ----------------------------------------------------------------------- */
 /* some debug code                                                         */
 
@@ -4175,8 +4182,7 @@ static irqreturn_t bttv_irq(int irq, void *dev_id)
 
 static struct video_device *vdev_init(struct bttv *btv,
                                       const struct video_device *template,
-                                      const char *type_name,
-                                      const int type)
+                                      const char *type_name)
 {
         struct video_device *vfd;
 
@@ -4185,9 +4191,8 @@ static struct video_device *vdev_init(struct bttv *btv,
                 return NULL;
         *vfd = *template;
         vfd->minor   = -1;
-        vfd->dev     = &btv->c.pci->dev;
+        vfd->parent  = &btv->c.pci->dev;
         vfd->release = video_device_release;
-        vfd->type    = type;
         vfd->debug   = bttv_debug;
         snprintf(vfd->name, sizeof(vfd->name), "BT%d%s %s (%s)",
                  btv->id, (btv->id==848 && btv->revision==0x12) ? "A" : "",
@@ -4223,20 +4228,11 @@ static void bttv_unregister_video(struct bttv *btv)
 /* register video4linux devices */
 static int __devinit bttv_register_video(struct bttv *btv)
 {
-        int video_type = VID_TYPE_CAPTURE |
-                         VID_TYPE_TUNER   |
-                         VID_TYPE_CLIPPING|
-                         VID_TYPE_SCALES;
-
-        if (no_overlay <= 0) {
-                bttv_video_template.type |= VID_TYPE_OVERLAY;
-        } else {
+        if (no_overlay > 0)
                 printk("bttv: Overlay support disabled.\n");
-        }
 
         /* video */
-        btv->video_dev = vdev_init(btv, &bttv_video_template,
-                                   "video", video_type);
+        btv->video_dev = vdev_init(btv, &bttv_video_template, "video");
 
         if (NULL == btv->video_dev)
                 goto err;
@@ -4244,7 +4240,7 @@ static int __devinit bttv_register_video(struct bttv *btv)
                 goto err;
         printk(KERN_INFO "bttv%d: registered device video%d\n",
                btv->c.nr,btv->video_dev->minor & 0x1f);
-        if (device_create_file(&btv->video_dev->class_dev,
+        if (device_create_file(&btv->video_dev->dev,
                                      &dev_attr_card)<0) {
                 printk(KERN_ERR "bttv%d: device_create_file 'card' "
                        "failed\n", btv->c.nr);
@@ -4252,8 +4248,7 @@ static int __devinit bttv_register_video(struct bttv *btv)
         }
 
         /* vbi */
-        btv->vbi_dev = vdev_init(btv, &bttv_video_template,
-                                 "vbi", VID_TYPE_TUNER | VID_TYPE_TELETEXT);
+        btv->vbi_dev = vdev_init(btv, &bttv_video_template, "vbi");
 
         if (NULL == btv->vbi_dev)
                 goto err;
@@ -4265,8 +4260,7 @@ static int __devinit bttv_register_video(struct bttv *btv)
         if (!btv->has_radio)
                 return 0;
         /* radio */
-        btv->radio_dev = vdev_init(btv, &radio_template,
-                                   "radio", VID_TYPE_TUNER);
+        btv->radio_dev = vdev_init(btv, &radio_template, "radio");
         if (NULL == btv->radio_dev)
                 goto err;
         if (video_register_device(btv->radio_dev, VFL_TYPE_RADIO,radio_nr)<0)
diff --git a/drivers/media/video/bt8xx/bttv-risc.c b/drivers/media/video/bt8xx/bttv-risc.c
index 0af586876e72..649682aac1ac 100644
--- a/drivers/media/video/bt8xx/bttv-risc.c
+++ b/drivers/media/video/bt8xx/bttv-risc.c
@@ -31,6 +31,7 @@
 #include <linux/interrupt.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
+#include <media/v4l2-ioctl.h>
 
 #include "bttvp.h"
 
diff --git a/drivers/media/video/bt8xx/bttv-vbi.c b/drivers/media/video/bt8xx/bttv-vbi.c
index 68f28e5fa040..6819e21a3773 100644
--- a/drivers/media/video/bt8xx/bttv-vbi.c
+++ b/drivers/media/video/bt8xx/bttv-vbi.c
@@ -29,6 +29,7 @@
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
 #include <linux/kdev_t.h>
+#include <media/v4l2-ioctl.h>
 #include <asm/io.h>
 #include "bttvp.h"
 
diff --git a/drivers/media/video/bw-qcam.c b/drivers/media/video/bw-qcam.c
index b364adaae78d..d3b3268bace8 100644
--- a/drivers/media/video/bw-qcam.c
+++ b/drivers/media/video/bw-qcam.c
@@ -74,6 +74,7 @@ OTHER DEALINGS IN THE SOFTWARE.
 #include <linux/sched.h>
 #include <linux/videodev.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <linux/mutex.h>
 #include <asm/uaccess.h>
 
@@ -906,9 +907,7 @@ static const struct file_operations qcam_fops = {
 };
 static struct video_device qcam_template=
 {
-        .owner          = THIS_MODULE,
         .name           = "Connectix Quickcam",
-        .type           = VID_TYPE_CAPTURE,
         .fops           = &qcam_fops,
 };
 
diff --git a/drivers/media/video/c-qcam.c b/drivers/media/video/c-qcam.c
index fe1e67bb1ca8..fe9379b282d3 100644
--- a/drivers/media/video/c-qcam.c
+++ b/drivers/media/video/c-qcam.c
@@ -35,6 +35,7 @@
 #include <linux/sched.h>
 #include <linux/videodev.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <linux/mutex.h>
 #include <linux/jiffies.h>
 
@@ -701,9 +702,7 @@ static const struct file_operations qcam_fops = {
 
 static struct video_device qcam_template=
 {
-        .owner          = THIS_MODULE,
         .name           = "Colour QuickCam",
-        .type           = VID_TYPE_CAPTURE,
         .fops           = &qcam_fops,
 };
 
diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c
index d99453faaab7..c149b7d712e5 100644
--- a/drivers/media/video/cafe_ccic.c
+++ b/drivers/media/video/cafe_ccic.c
@@ -25,6 +25,7 @@
 #include <linux/spinlock.h>
 #include <linux/videodev2.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <media/v4l2-chip-ident.h>
 #include <linux/device.h>
 #include <linux/wait.h>
@@ -1768,17 +1769,7 @@ static const struct file_operations cafe_v4l_fops = {
         .llseek = no_llseek,
 };
 
-static struct video_device cafe_v4l_template = {
-        .name = "cafe",
-        .type = VFL_TYPE_GRABBER,
-        .type2 = VID_TYPE_CAPTURE,
-        .minor = -1, /* Get one dynamically */
-        .tvnorms = V4L2_STD_NTSC_M,
-        .current_norm = V4L2_STD_NTSC_M,  /* make mplayer happy */
-
-        .fops = &cafe_v4l_fops,
-        .release = cafe_v4l_dev_release,
-
+static const struct v4l2_ioctl_ops cafe_v4l_ioctl_ops = {
         .vidioc_querycap        = cafe_vidioc_querycap,
         .vidioc_enum_fmt_vid_cap = cafe_vidioc_enum_fmt_vid_cap,
         .vidioc_try_fmt_vid_cap = cafe_vidioc_try_fmt_vid_cap,
@@ -1801,6 +1792,17 @@ static struct video_device cafe_v4l_template = {
         .vidioc_s_parm          = cafe_vidioc_s_parm,
 };
 
+static struct video_device cafe_v4l_template = {
+        .name = "cafe",
+        .minor = -1, /* Get one dynamically */
+        .tvnorms = V4L2_STD_NTSC_M,
+        .current_norm = V4L2_STD_NTSC_M,  /* make mplayer happy */
+
+        .fops = &cafe_v4l_fops,
+        .ioctl_ops = &cafe_v4l_ioctl_ops,
+        .release = cafe_v4l_dev_release,
+};
+
 
 
 
@@ -2157,7 +2159,7 @@ static int cafe_pci_probe(struct pci_dev *pdev,
         cam->v4ldev = cafe_v4l_template;
         cam->v4ldev.debug = 0;
 //      cam->v4ldev.debug = V4L2_DEBUG_IOCTL_ARG;
-        cam->v4ldev.dev = &pdev->dev;
+        cam->v4ldev.parent = &pdev->dev;
         ret = video_register_device(&cam->v4ldev, VFL_TYPE_GRABBER, -1);
         if (ret)
                 goto out_smbus;
diff --git a/drivers/media/video/compat_ioctl32.c b/drivers/media/video/compat_ioctl32.c
index 54de0cd482e9..bd5d9de5a008 100644
--- a/drivers/media/video/compat_ioctl32.c
+++ b/drivers/media/video/compat_ioctl32.c
@@ -17,7 +17,7 @@
 #include <linux/videodev2.h>
 #include <linux/module.h>
 #include <linux/smp_lock.h>
-#include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 
 #ifdef CONFIG_COMPAT
 
diff --git a/drivers/media/video/cpia.c b/drivers/media/video/cpia.c
index 2a81376ef503..dc8cc6115e2f 100644
--- a/drivers/media/video/cpia.c
+++ b/drivers/media/video/cpia.c
@@ -3799,9 +3799,7 @@ static const struct file_operations cpia_fops = {
 };
 
 static struct video_device cpia_template = {
-        .owner          = THIS_MODULE,
         .name           = "CPiA Camera",
-        .type           = VID_TYPE_CAPTURE,
         .fops           = &cpia_fops,
 };
 
diff --git a/drivers/media/video/cpia.h b/drivers/media/video/cpia.h
index 5096058bf579..8f0cfee4b8a1 100644
--- a/drivers/media/video/cpia.h
+++ b/drivers/media/video/cpia.h
@@ -46,6 +46,7 @@
 #include <asm/uaccess.h>
 #include <linux/videodev.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <linux/list.h>
 #include <linux/mutex.h>
 
diff --git a/drivers/media/video/cpia2/cpia2_core.c b/drivers/media/video/cpia2/cpia2_core.c
index f2e8b1c82c66..af8b9ec8e358 100644
--- a/drivers/media/video/cpia2/cpia2_core.c
+++ b/drivers/media/video/cpia2/cpia2_core.c
@@ -32,6 +32,7 @@
 #include "cpia2.h"
 
 #include <linux/slab.h>
+#include <linux/mm.h>
 #include <linux/vmalloc.h>
 #include <linux/firmware.h>
 
diff --git a/drivers/media/video/cpia2/cpia2_v4l.c b/drivers/media/video/cpia2/cpia2_v4l.c
index 7ce2789fa976..515c8b57a60d 100644
--- a/drivers/media/video/cpia2/cpia2_v4l.c
+++ b/drivers/media/video/cpia2/cpia2_v4l.c
@@ -37,6 +37,7 @@
 #include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/init.h>
+#include <media/v4l2-ioctl.h>
 
 #include "cpia2.h"
 #include "cpia2dev.h"
@@ -1935,11 +1936,7 @@ static const struct file_operations fops_template = {
 
 static struct video_device cpia2_template = {
         /* I could not find any place for the old .initialize initializer?? */
-        .owner=         THIS_MODULE,
         .name=          "CPiA2 Camera",
-        .type=          VID_TYPE_CAPTURE,
-        .type2 =        V4L2_CAP_VIDEO_CAPTURE |
-                        V4L2_CAP_STREAMING,
         .minor=         -1,
         .fops=          &fops_template,
         .release=       video_device_release,
diff --git a/drivers/media/video/cs5345.c b/drivers/media/video/cs5345.c
index 1c3fa3a7470a..61d14d26686f 100644
--- a/drivers/media/video/cs5345.c
+++ b/drivers/media/video/cs5345.c
@@ -111,7 +111,7 @@ static int cs5345_command(struct i2c_client *client, unsigned cmd, void *arg)
                 if (cmd == VIDIOC_DBG_G_REGISTER)
                         reg->val = cs5345_read(client, reg->reg & 0x1f);
                 else
-                        cs5345_write(client, reg->reg & 0x1f, reg->val & 0x1f);
+                        cs5345_write(client, reg->reg & 0x1f, reg->val & 0xff);
                 break;
         }
 #endif
diff --git a/drivers/media/video/cs53l32a.c b/drivers/media/video/cs53l32a.c
index 645b339152d3..e30a589c0e18 100644
--- a/drivers/media/video/cs53l32a.c
+++ b/drivers/media/video/cs53l32a.c
@@ -26,7 +26,7 @@
 #include <asm/uaccess.h>
 #include <linux/i2c.h>
 #include <linux/i2c-id.h>
-#include <linux/videodev.h>
+#include <linux/videodev2.h>
 #include <media/v4l2-common.h>
 #include <media/v4l2-chip-ident.h>
 #include <media/v4l2-i2c-drv-legacy.h>
diff --git a/drivers/media/video/cx18/Kconfig b/drivers/media/video/cx18/Kconfig
index 9aefdc5ea79a..ef48565de7f1 100644
--- a/drivers/media/video/cx18/Kconfig
+++ b/drivers/media/video/cx18/Kconfig
@@ -2,9 +2,7 @@ config VIDEO_CX18
         tristate "Conexant cx23418 MPEG encoder support"
         depends on VIDEO_V4L2 && DVB_CORE && PCI && I2C && EXPERIMENTAL
         depends on INPUT        # due to VIDEO_IR
-        depends on HOTPLUG      # due to FW_LOADER
         select I2C_ALGOBIT
-        select FW_LOADER
         select VIDEO_IR
         select VIDEO_TUNER
         select VIDEO_TVEEPROM
diff --git a/drivers/media/video/cx18/cx18-av-audio.c b/drivers/media/video/cx18/cx18-av-audio.c
index c40a286de1b9..0b55837880a7 100644
--- a/drivers/media/video/cx18/cx18-av-audio.c
+++ b/drivers/media/video/cx18/cx18-av-audio.c
@@ -30,7 +30,6 @@ static int set_audclk_freq(struct cx18 *cx, u32 freq)
         if (freq != 32000 && freq != 44100 && freq != 48000)
                 return -EINVAL;
 
-        /* common for all inputs and rates */
         /* SA_MCLK_SEL=1, SA_MCLK_DIV=0x10 */
         cx18_av_write(cx, 0x127, 0x50);
 
@@ -38,15 +37,30 @@ static int set_audclk_freq(struct cx18 *cx, u32 freq)
                 switch (freq) {
                 case 32000:
                         /* VID_PLL and AUX_PLL */
-                        cx18_av_write4(cx, 0x108, 0x1006040f);
+                        cx18_av_write4(cx, 0x108, 0x1408040f);
 
                         /* AUX_PLL_FRAC */
-                        cx18_av_write4(cx, 0x110, 0x01bb39ee);
+                        /* 0x8.9504318a * 28,636,363.636 / 0x14 = 32000 * 384 */
+                        cx18_av_write4(cx, 0x110, 0x012a0863);
 
-                        /* src3/4/6_ctl = 0x0801f77f */
+                        /* src3/4/6_ctl */
+                        /* 0x1.f77f = (4 * 15734.26) / 32000 */
                         cx18_av_write4(cx, 0x900, 0x0801f77f);
                         cx18_av_write4(cx, 0x904, 0x0801f77f);
                         cx18_av_write4(cx, 0x90c, 0x0801f77f);
+
+                        /* SA_MCLK_SEL=1, SA_MCLK_DIV=0x14 */
+                        cx18_av_write(cx, 0x127, 0x54);
+
+                        /* AUD_COUNT = 0x2fff = 8 samples * 4 * 384 - 1 */
+                        cx18_av_write4(cx, 0x12c, 0x11202fff);
+
+                        /*
+                         * EN_AV_LOCK = 1
+                         * VID_COUNT = 0x0d2ef8 = 107999.000 * 8 =
+                         *  ((8 samples/32,000) * (13,500,000 * 8) * 4 - 1) * 8
+                         */
+                        cx18_av_write4(cx, 0x128, 0xa10d2ef8);
                         break;
 
                 case 44100:
@@ -54,12 +68,24 @@ static int set_audclk_freq(struct cx18 *cx, u32 freq)
                         cx18_av_write4(cx, 0x108, 0x1009040f);
 
                         /* AUX_PLL_FRAC */
-                        cx18_av_write4(cx, 0x110, 0x00ec6bd6);
+                        /* 0x9.7635e7 * 28,636,363.63 / 0x10 = 44100 * 384 */
+                        cx18_av_write4(cx, 0x110, 0x00ec6bce);
 
-                        /* src3/4/6_ctl = 0x08016d59 */
+                        /* src3/4/6_ctl */
+                        /* 0x1.6d59 = (4 * 15734.26) / 44100 */
                         cx18_av_write4(cx, 0x900, 0x08016d59);
                         cx18_av_write4(cx, 0x904, 0x08016d59);
                         cx18_av_write4(cx, 0x90c, 0x08016d59);
+
+                        /* AUD_COUNT = 0x92ff = 49 samples * 2 * 384 - 1 */
+                        cx18_av_write4(cx, 0x12c, 0x112092ff);
+
+                        /*
+                         * EN_AV_LOCK = 1
+                         * VID_COUNT = 0x1d4bf8 = 239999.000 * 8 =
+                         *  ((49 samples/44,100) * (13,500,000 * 8) * 2 - 1) * 8
+                         */
+                        cx18_av_write4(cx, 0x128, 0xa11d4bf8);
                         break;
 
                 case 48000:
@@ -67,12 +93,24 @@ static int set_audclk_freq(struct cx18 *cx, u32 freq)
                         cx18_av_write4(cx, 0x108, 0x100a040f);
 
                         /* AUX_PLL_FRAC */
-                        cx18_av_write4(cx, 0x110, 0x0098d6e5);
+                        /* 0xa.4c6b6ea * 28,636,363.63 / 0x10 = 48000 * 384 */
+                        cx18_av_write4(cx, 0x110, 0x0098d6dd);
 
-                        /* src3/4/6_ctl = 0x08014faa */
+                        /* src3/4/6_ctl */
+                        /* 0x1.4faa = (4 * 15734.26) / 48000 */
                         cx18_av_write4(cx, 0x900, 0x08014faa);
                         cx18_av_write4(cx, 0x904, 0x08014faa);
                         cx18_av_write4(cx, 0x90c, 0x08014faa);
+
+                        /* AUD_COUNT = 0x5fff = 4 samples * 16 * 384 - 1 */
+                        cx18_av_write4(cx, 0x12c, 0x11205fff);
+
+                        /*
+                         * EN_AV_LOCK = 1
+                         * VID_COUNT = 0x1193f8 = 143999.000 * 8 =
+                         *  ((4 samples/48,000) * (13,500,000 * 8) * 16 - 1) * 8
+                         */
+                        cx18_av_write4(cx, 0x128, 0xa11193f8);
                         break;
                 }
         } else {
@@ -82,18 +120,31 @@ static int set_audclk_freq(struct cx18 *cx, u32 freq)
                         cx18_av_write4(cx, 0x108, 0x1e08040f);
 
                         /* AUX_PLL_FRAC */
-                        cx18_av_write4(cx, 0x110, 0x012a0869);
+                        /* 0x8.9504318 * 28,636,363.63 / 0x1e = 32000 * 256 */
+                        cx18_av_write4(cx, 0x110, 0x012a0863);
 
-                        /* src1_ctl = 0x08010000 */
+                        /* src1_ctl */
+                        /* 0x1.0000 = 32000/32000 */
                         cx18_av_write4(cx, 0x8f8, 0x08010000);
 
-                        /* src3/4/6_ctl = 0x08020000 */
+                        /* src3/4/6_ctl */
+                        /* 0x2.0000 = 2 * (32000/32000) */
                         cx18_av_write4(cx, 0x900, 0x08020000);
                         cx18_av_write4(cx, 0x904, 0x08020000);
                         cx18_av_write4(cx, 0x90c, 0x08020000);
 
                         /* SA_MCLK_SEL=1, SA_MCLK_DIV=0x14 */
                         cx18_av_write(cx, 0x127, 0x54);
+
+                        /* AUD_COUNT = 0x1fff = 8 samples * 4 * 256 - 1 */
+                        cx18_av_write4(cx, 0x12c, 0x11201fff);
+
+                        /*
+                         * EN_AV_LOCK = 1
+                         * VID_COUNT = 0x0d2ef8 = 107999.000 * 8 =
+                         *  ((8 samples/32,000) * (13,500,000 * 8) * 4 - 1) * 8
+                         */
+                        cx18_av_write4(cx, 0x128, 0xa10d2ef8);
                         break;
 
                 case 44100:
@@ -101,15 +152,28 @@ static int set_audclk_freq(struct cx18 *cx, u32 freq)
                         cx18_av_write4(cx, 0x108, 0x1809040f);
 
                         /* AUX_PLL_FRAC */
-                        cx18_av_write4(cx, 0x110, 0x00ec6bd6);
+                        /* 0x9.7635e74 * 28,636,363.63 / 0x18 = 44100 * 256 */
+                        cx18_av_write4(cx, 0x110, 0x00ec6bce);
 
-                        /* src1_ctl = 0x08010000 */
+                        /* src1_ctl */
+                        /* 0x1.60cd = 44100/32000 */
                         cx18_av_write4(cx, 0x8f8, 0x080160cd);
 
-                        /* src3/4/6_ctl = 0x08020000 */
+                        /* src3/4/6_ctl */
+                        /* 0x1.7385 = 2 * (32000/44100) */
                         cx18_av_write4(cx, 0x900, 0x08017385);
                         cx18_av_write4(cx, 0x904, 0x08017385);
                         cx18_av_write4(cx, 0x90c, 0x08017385);
+
+                        /* AUD_COUNT = 0x61ff = 49 samples * 2 * 256 - 1 */
+                        cx18_av_write4(cx, 0x12c, 0x112061ff);
+
+                        /*
+                         * EN_AV_LOCK = 1
+                         * VID_COUNT = 0x1d4bf8 = 239999.000 * 8 =
+                         *  ((49 samples/44,100) * (13,500,000 * 8) * 2 - 1) * 8
+                         */
+                        cx18_av_write4(cx, 0x128, 0xa11d4bf8);
                         break;
 
                 case 48000:
@@ -117,15 +181,28 @@ static int set_audclk_freq(struct cx18 *cx, u32 freq)
                         cx18_av_write4(cx, 0x108, 0x180a040f);
 
                         /* AUX_PLL_FRAC */
-                        cx18_av_write4(cx, 0x110, 0x0098d6e5);
+                        /* 0xa.4c6b6ea * 28,636,363.63 / 0x18 = 48000 * 256 */
+                        cx18_av_write4(cx, 0x110, 0x0098d6dd);
 
-                        /* src1_ctl = 0x08010000 */
+                        /* src1_ctl */
+                        /* 0x1.8000 = 48000/32000 */
                         cx18_av_write4(cx, 0x8f8, 0x08018000);
 
-                        /* src3/4/6_ctl = 0x08020000 */
+                        /* src3/4/6_ctl */
+                        /* 0x1.5555 = 2 * (32000/48000) */
                         cx18_av_write4(cx, 0x900, 0x08015555);
                         cx18_av_write4(cx, 0x904, 0x08015555);
                         cx18_av_write4(cx, 0x90c, 0x08015555);
+
+                        /* AUD_COUNT = 0x3fff = 4 samples * 16 * 256 - 1 */
+                        cx18_av_write4(cx, 0x12c, 0x11203fff);
+
+                        /*
+                         * EN_AV_LOCK = 1
+                         * VID_COUNT = 0x1193f8 = 143999.000 * 8 =
+                         *  ((4 samples/48,000) * (13,500,000 * 8) * 16 - 1) * 8
+                         */
+                        cx18_av_write4(cx, 0x128, 0xa11193f8);
                         break;
                 }
         }
diff --git a/drivers/media/video/cx18/cx18-driver.h b/drivers/media/video/cx18/cx18-driver.h
index 45e31b04730e..4801bc7fb5b2 100644
--- a/drivers/media/video/cx18/cx18-driver.h
+++ b/drivers/media/video/cx18/cx18-driver.h
@@ -46,6 +46,7 @@
 #include <linux/dvb/video.h>
 #include <linux/dvb/audio.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <media/tuner.h>
 #include "cx18-mailbox.h"
 #include "cx18-av-core.h"
diff --git a/drivers/media/video/cx18/cx18-firmware.c b/drivers/media/video/cx18/cx18-firmware.c
index 2d630d9f7496..78fadd2ada5d 100644
--- a/drivers/media/video/cx18/cx18-firmware.c
+++ b/drivers/media/video/cx18/cx18-firmware.c
@@ -86,10 +86,6 @@
 
 #define CX18_DSP0_INTERRUPT_MASK        0xd0004C
 
-/* Encoder/decoder firmware sizes */
-#define CX18_FW_CPU_SIZE                (158332)
-#define CX18_FW_APU_SIZE                (141200)
-
 #define APU_ROM_SYNC1 0x6D676553 /* "mgeS" */
 #define APU_ROM_SYNC2 0x72646548 /* "rdeH" */
 
@@ -100,35 +96,22 @@ struct cx18_apu_rom_seghdr {
         u32 size;
 };
 
-static int load_cpu_fw_direct(const char *fn, u8 __iomem *mem, struct cx18 *cx, long size)
+static int load_cpu_fw_direct(const char *fn, u8 __iomem *mem, struct cx18 *cx)
 {
         const struct firmware *fw = NULL;
-        int retries = 3;
         int i, j;
+        unsigned size;
         u32 __iomem *dst = (u32 __iomem *)mem;
         const u32 *src;
 
-retry:
-        if (!retries || request_firmware(&fw, fn, &cx->dev->dev)) {
-                CX18_ERR("Unable to open firmware %s (must be %ld bytes)\n",
-                                fn, size);
+        if (request_firmware(&fw, fn, &cx->dev->dev)) {
+                CX18_ERR("Unable to open firmware %s\n", fn);
                 CX18_ERR("Did you put the firmware in the hotplug firmware directory?\n");
                 return -ENOMEM;
         }
 
         src = (const u32 *)fw->data;
 
-        if (fw->size != size) {
-                /* Due to race conditions in firmware loading (esp. with
-                   udev <0.95) the wrong file was sometimes loaded. So we check
-                   filesizes to see if at least the right-sized file was
-                   loaded. If not, then we retry. */
-                CX18_INFO("retry: file loaded was not %s (expected size %ld, got %zd)\n",
-                                fn, size, fw->size);
-                release_firmware(fw);
-                retries--;
-                goto retry;
-        }
         for (i = 0; i < fw->size; i += 4096) {
                 setup_page(i);
                 for (j = i; j < fw->size && j < i + 4096; j += 4) {
@@ -145,15 +128,16 @@ retry:
         }
         if (!test_bit(CX18_F_I_LOADED_FW, &cx->i_flags))
                 CX18_INFO("loaded %s firmware (%zd bytes)\n", fn, fw->size);
+        size = fw->size;
         release_firmware(fw);
         return size;
 }
 
-static int load_apu_fw_direct(const char *fn, u8 __iomem *dst, struct cx18 *cx, long size)
+static int load_apu_fw_direct(const char *fn, u8 __iomem *dst, struct cx18 *cx)
 {
         const struct firmware *fw = NULL;
-        int retries = 3;
         int i, j;
+        unsigned size;
         const u32 *src;
         struct cx18_apu_rom_seghdr seghdr;
         const u8 *vers;
@@ -161,10 +145,8 @@ static int load_apu_fw_direct(const char *fn, u8 __iomem *dst, struct cx18 *cx,
         u32 apu_version = 0;
         int sz;
 
-retry:
-        if (!retries || request_firmware(&fw, fn, &cx->dev->dev)) {
-                CX18_ERR("unable to open firmware %s (must be %ld bytes)\n",
-                                fn, size);
+        if (request_firmware(&fw, fn, &cx->dev->dev)) {
+                CX18_ERR("unable to open firmware %s\n", fn);
                 CX18_ERR("did you put the firmware in the hotplug firmware directory?\n");
                 return -ENOMEM;
         }
@@ -173,19 +155,8 @@ retry:
         vers = fw->data + sizeof(seghdr);
         sz = fw->size;
 
-        if (fw->size != size) {
-                /* Due to race conditions in firmware loading (esp. with
-                   udev <0.95) the wrong file was sometimes loaded. So we check
-                   filesizes to see if at least the right-sized file was
-                   loaded. If not, then we retry. */
-                CX18_INFO("retry: file loaded was not %s (expected size %ld, got %zd)\n",
-                               fn, size, fw->size);
-                release_firmware(fw);
-                retries--;
-                goto retry;
-        }
         apu_version = (vers[0] << 24) | (vers[4] << 16) | vers[32];
-        while (offset + sizeof(seghdr) < size) {
+        while (offset + sizeof(seghdr) < fw->size) {
                 /* TODO: byteswapping */
                 memcpy(&seghdr, src + offset / 4, sizeof(seghdr));
                 offset += sizeof(seghdr);
@@ -215,6 +186,7 @@ retry:
         if (!test_bit(CX18_F_I_LOADED_FW, &cx->i_flags))
                 CX18_INFO("loaded %s firmware V%08x (%zd bytes)\n",
                                 fn, apu_version, fw->size);
+        size = fw->size;
         release_firmware(fw);
         /* Clear bit0 for APU to start from 0 */
         write_reg(read_reg(0xc72030) & ~1, 0xc72030);
@@ -340,7 +312,7 @@ int cx18_firmware_init(struct cx18 *cx)
         /* Only if the processor is not running */
         if (read_reg(CX18_PROC_SOFT_RESET) & 8) {
                 int sz = load_apu_fw_direct("v4l-cx23418-apu.fw",
-                               cx->enc_mem, cx, CX18_FW_APU_SIZE);
+                               cx->enc_mem, cx);
 
                 write_enc(0xE51FF004, 0);
                 write_enc(0xa00000, 4);  /* todo: not hardcoded */
@@ -348,7 +320,7 @@ int cx18_firmware_init(struct cx18 *cx)
                 cx18_msleep_timeout(500, 0);
 
                 sz = sz <= 0 ? sz : load_cpu_fw_direct("v4l-cx23418-cpu.fw",
-                                        cx->enc_mem, cx, CX18_FW_CPU_SIZE);
+                                        cx->enc_mem, cx);
 
                 if (sz > 0) {
                         int retries = 0;
diff --git a/drivers/media/video/cx18/cx18-ioctl.c b/drivers/media/video/cx18/cx18-ioctl.c
index 0d74e59e503e..a7f839631d6a 100644
--- a/drivers/media/video/cx18/cx18-ioctl.c
+++ b/drivers/media/video/cx18/cx18-ioctl.c
@@ -787,50 +787,54 @@ int cx18_v4l2_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
         return res;
 }
 
-void cx18_set_funcs(struct video_device *vdev)
-{
-        vdev->vidioc_querycap                = cx18_querycap;
-        vdev->vidioc_g_priority              = cx18_g_priority;
-        vdev->vidioc_s_priority              = cx18_s_priority;
-        vdev->vidioc_s_audio                 = cx18_s_audio;
-        vdev->vidioc_g_audio                 = cx18_g_audio;
-        vdev->vidioc_enumaudio               = cx18_enumaudio;
-        vdev->vidioc_enum_input              = cx18_enum_input;
-        vdev->vidioc_cropcap                 = cx18_cropcap;
-        vdev->vidioc_s_crop                  = cx18_s_crop;
-        vdev->vidioc_g_crop                  = cx18_g_crop;
-        vdev->vidioc_g_input                 = cx18_g_input;
-        vdev->vidioc_s_input                 = cx18_s_input;
-        vdev->vidioc_g_frequency             = cx18_g_frequency;
-        vdev->vidioc_s_frequency             = cx18_s_frequency;
-        vdev->vidioc_s_tuner                 = cx18_s_tuner;
-        vdev->vidioc_g_tuner                 = cx18_g_tuner;
-        vdev->vidioc_g_enc_index             = cx18_g_enc_index;
-        vdev->vidioc_g_std                   = cx18_g_std;
-        vdev->vidioc_s_std                   = cx18_s_std;
-        vdev->vidioc_log_status              = cx18_log_status;
-        vdev->vidioc_enum_fmt_vid_cap        = cx18_enum_fmt_vid_cap;
-        vdev->vidioc_encoder_cmd             = cx18_encoder_cmd;
-        vdev->vidioc_try_encoder_cmd         = cx18_try_encoder_cmd;
-        vdev->vidioc_g_fmt_vid_cap           = cx18_g_fmt_vid_cap;
-        vdev->vidioc_g_fmt_vbi_cap           = cx18_g_fmt_vbi_cap;
-        vdev->vidioc_g_fmt_sliced_vbi_cap    = cx18_g_fmt_sliced_vbi_cap;
-        vdev->vidioc_s_fmt_vid_cap           = cx18_s_fmt_vid_cap;
-        vdev->vidioc_s_fmt_vbi_cap           = cx18_s_fmt_vbi_cap;
-        vdev->vidioc_s_fmt_sliced_vbi_cap    = cx18_s_fmt_sliced_vbi_cap;
-        vdev->vidioc_try_fmt_vid_cap         = cx18_try_fmt_vid_cap;
-        vdev->vidioc_try_fmt_vbi_cap         = cx18_try_fmt_vbi_cap;
-        vdev->vidioc_try_fmt_sliced_vbi_cap  = cx18_try_fmt_sliced_vbi_cap;
-        vdev->vidioc_g_sliced_vbi_cap        = cx18_g_sliced_vbi_cap;
-        vdev->vidioc_g_chip_ident            = cx18_g_chip_ident;
+static const struct v4l2_ioctl_ops cx18_ioctl_ops = {
+        .vidioc_querycap                = cx18_querycap,
+        .vidioc_g_priority              = cx18_g_priority,
+        .vidioc_s_priority              = cx18_s_priority,
+        .vidioc_s_audio                 = cx18_s_audio,
+        .vidioc_g_audio                 = cx18_g_audio,
+        .vidioc_enumaudio               = cx18_enumaudio,
+        .vidioc_enum_input              = cx18_enum_input,
+        .vidioc_cropcap                 = cx18_cropcap,
+        .vidioc_s_crop                  = cx18_s_crop,
+        .vidioc_g_crop                  = cx18_g_crop,
+        .vidioc_g_input                 = cx18_g_input,
+        .vidioc_s_input                 = cx18_s_input,
+        .vidioc_g_frequency             = cx18_g_frequency,
+        .vidioc_s_frequency             = cx18_s_frequency,
+        .vidioc_s_tuner                 = cx18_s_tuner,
+        .vidioc_g_tuner                 = cx18_g_tuner,
+        .vidioc_g_enc_index             = cx18_g_enc_index,
+        .vidioc_g_std                   = cx18_g_std,
+        .vidioc_s_std                   = cx18_s_std,
+        .vidioc_log_status              = cx18_log_status,
+        .vidioc_enum_fmt_vid_cap        = cx18_enum_fmt_vid_cap,
+        .vidioc_encoder_cmd             = cx18_encoder_cmd,
+        .vidioc_try_encoder_cmd         = cx18_try_encoder_cmd,
+        .vidioc_g_fmt_vid_cap           = cx18_g_fmt_vid_cap,
+        .vidioc_g_fmt_vbi_cap           = cx18_g_fmt_vbi_cap,
+        .vidioc_g_fmt_sliced_vbi_cap    = cx18_g_fmt_sliced_vbi_cap,
+        .vidioc_s_fmt_vid_cap           = cx18_s_fmt_vid_cap,
+        .vidioc_s_fmt_vbi_cap           = cx18_s_fmt_vbi_cap,
+        .vidioc_s_fmt_sliced_vbi_cap    = cx18_s_fmt_sliced_vbi_cap,
+        .vidioc_try_fmt_vid_cap         = cx18_try_fmt_vid_cap,
+        .vidioc_try_fmt_vbi_cap         = cx18_try_fmt_vbi_cap,
+        .vidioc_try_fmt_sliced_vbi_cap  = cx18_try_fmt_sliced_vbi_cap,
+        .vidioc_g_sliced_vbi_cap        = cx18_g_sliced_vbi_cap,
+        .vidioc_g_chip_ident            = cx18_g_chip_ident,
 #ifdef CONFIG_VIDEO_ADV_DEBUG
-        vdev->vidioc_g_register              = cx18_g_register;
-        vdev->vidioc_s_register              = cx18_s_register;
+        .vidioc_g_register              = cx18_g_register,
+        .vidioc_s_register              = cx18_s_register,
 #endif
-        vdev->vidioc_default                 = cx18_default;
-        vdev->vidioc_queryctrl               = cx18_queryctrl;
-        vdev->vidioc_querymenu               = cx18_querymenu;
-        vdev->vidioc_g_ext_ctrls             = cx18_g_ext_ctrls;
-        vdev->vidioc_s_ext_ctrls             = cx18_s_ext_ctrls;
-        vdev->vidioc_try_ext_ctrls           = cx18_try_ext_ctrls;
+        .vidioc_default                 = cx18_default,
+        .vidioc_queryctrl               = cx18_queryctrl,
+        .vidioc_querymenu               = cx18_querymenu,
+        .vidioc_g_ext_ctrls             = cx18_g_ext_ctrls,
+        .vidioc_s_ext_ctrls             = cx18_s_ext_ctrls,
+        .vidioc_try_ext_ctrls           = cx18_try_ext_ctrls,
+};
+
+void cx18_set_funcs(struct video_device *vdev)
+{
+        vdev->ioctl_ops = &cx18_ioctl_ops;
 }
diff --git a/drivers/media/video/cx18/cx18-streams.c b/drivers/media/video/cx18/cx18-streams.c
index 1728b1d832a9..0da57f583bf7 100644
--- a/drivers/media/video/cx18/cx18-streams.c
+++ b/drivers/media/video/cx18/cx18-streams.c
@@ -187,14 +187,11 @@ static int cx18_prep_dev(struct cx18 *cx, int type)
                 return -ENOMEM;
         }
 
-        s->v4l2dev->type =
-                VID_TYPE_CAPTURE | VID_TYPE_TUNER | VID_TYPE_TELETEXT |
-                VID_TYPE_CLIPPING | VID_TYPE_SCALES | VID_TYPE_MPEG_ENCODER;
         snprintf(s->v4l2dev->name, sizeof(s->v4l2dev->name), "cx18-%d",
                         cx->num);
 
         s->v4l2dev->minor = minor;
-        s->v4l2dev->dev = &cx->dev->dev;
+        s->v4l2dev->parent = &cx->dev->dev;
         s->v4l2dev->fops = cx18_stream_info[type].fops;
         s->v4l2dev->release = video_device_release;
         s->v4l2dev->tvnorms = V4L2_STD_ALL;
diff --git a/drivers/media/video/cx23885/Kconfig b/drivers/media/video/cx23885/Kconfig
index 5cfb46bbdaa9..e60bd31b51a3 100644
--- a/drivers/media/video/cx23885/Kconfig
+++ b/drivers/media/video/cx23885/Kconfig
@@ -1,9 +1,7 @@
 config VIDEO_CX23885
         tristate "Conexant cx23885 (2388x successor) support"
         depends on DVB_CORE && VIDEO_DEV && PCI && I2C && INPUT
-        depends on HOTPLUG      # due to FW_LOADER
         select I2C_ALGOBIT
-        select FW_LOADER
         select VIDEO_BTCX
         select VIDEO_TUNER
         select VIDEO_TVEEPROM
diff --git a/drivers/media/video/cx23885/cx23885-417.c b/drivers/media/video/cx23885/cx23885-417.c
index e7ef093265af..8118091568fc 100644
--- a/drivers/media/video/cx23885/cx23885-417.c
+++ b/drivers/media/video/cx23885/cx23885-417.c
@@ -32,6 +32,7 @@
 #include <linux/device.h>
 #include <linux/firmware.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <media/cx2341x.h>
 
 #include "cx23885.h"
@@ -1699,14 +1700,7 @@ static struct file_operations mpeg_fops = {
         .llseek        = no_llseek,
 };
 
-static struct video_device cx23885_mpeg_template = {
-        .name          = "cx23885",
-        .type          = VID_TYPE_CAPTURE |
-                                VID_TYPE_TUNER |
-                                VID_TYPE_SCALES |
-                                VID_TYPE_MPEG_ENCODER,
-        .fops          = &mpeg_fops,
-        .minor         = -1,
+static const struct v4l2_ioctl_ops mpeg_ioctl_ops = {
         .vidioc_s_std            = vidioc_s_std,
         .vidioc_enum_input       = vidioc_enum_input,
         .vidioc_g_input          = vidioc_g_input,
@@ -1735,6 +1729,13 @@ static struct video_device cx23885_mpeg_template = {
         .vidioc_queryctrl        = vidioc_queryctrl,
 };
 
+static struct video_device cx23885_mpeg_template = {
+        .name          = "cx23885",
+        .fops          = &mpeg_fops,
+        .ioctl_ops     = &mpeg_ioctl_ops,
+        .minor         = -1,
+};
+
 void cx23885_417_unregister(struct cx23885_dev *dev)
 {
         dprintk(1, "%s()\n", __func__);
@@ -1766,7 +1767,7 @@ static struct video_device *cx23885_video_dev_alloc(
         vfd->minor   = -1;
         snprintf(vfd->name, sizeof(vfd->name), "%s %s (%s)", dev->name,
                 type, cx23885_boards[tsport->dev->board].name);
-        vfd->dev     = &pci->dev;
+        vfd->parent  = &pci->dev;
         vfd->release = video_device_release;
         return vfd;
 }
diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c
index fd7112c11d35..a19de850955d 100644
--- a/drivers/media/video/cx23885/cx23885-cards.c
+++ b/drivers/media/video/cx23885/cx23885-cards.c
@@ -145,6 +145,7 @@ struct cx23885_board cx23885_boards[] = {
         },
         [CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP] = {
                 .name           = "DViCO FusionHDTV7 Dual Express",
+                .portb          = CX23885_MPEG_DVB,
                 .portc          = CX23885_MPEG_DVB,
         },
 };
@@ -325,25 +326,41 @@ int cx23885_tuner_callback(void *priv, int command, int arg)
 {
         struct cx23885_i2c *bus = priv;
         struct cx23885_dev *dev = bus->dev;
+        u32 bitmask = 0;
+
+        if (command != 0) {
+                printk(KERN_ERR "%s(): Unknown command 0x%x.\n",
+                        __func__, command);
+                return -EINVAL;
+        }
 
         switch(dev->board) {
         case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
-                if(command == 0) {      /* Tuner Reset Command from xc5000 */
-                        /* Drive the tuner into reset and out */
-                        cx_clear(GP0_IO, 0x00000004);
-                        mdelay(200);
-                        cx_set(GP0_IO, 0x00000004);
-                        return 0;
-                }
-                else {
-                        printk(KERN_ERR
-                                "%s(): Unknow command.\n", __func__);
-                        return -EINVAL;
+                /* Tuner Reset Command from xc5000 */
+                if (command == 0)
+                        bitmask = 0x04;
+                break;
+        case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP:
+                if (command == 0) {
+
+                        /* Two identical tuners on two different i2c buses,
+                         * we need to reset the correct gpio. */
+                        if (bus->nr == 0)
+                                bitmask = 0x01;
+                        else if (bus->nr == 1)
+                                bitmask = 0x04;
                 }
                 break;
         }
 
-        return 0; /* Should never be here */
+        if (bitmask) {
+                /* Drive the tuner into reset and back out */
+                cx_clear(GP0_IO, bitmask);
+                mdelay(200);
+                cx_set(GP0_IO, bitmask);
+        }
+
+        return 0;
 }
 
 void cx23885_gpio_setup(struct cx23885_dev *dev)
@@ -435,6 +452,19 @@ void cx23885_gpio_setup(struct cx23885_dev *dev)
                 mdelay(20);
                 cx_set(GP0_IO, 0x00050005);
                 break;
+        case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP:
+                /* GPIO-0 xc5000 tuner reset i2c bus 0 */
+                /* GPIO-1 s5h1409 demod reset i2c bus 0 */
+                /* GPIO-2 xc5000 tuner reset i2c bus 1 */
+                /* GPIO-3 s5h1409 demod reset i2c bus 0 */
+
+                /* Put the parts into reset and back */
+                cx_set(GP0_IO, 0x000f0000);
+                mdelay(20);
+                cx_clear(GP0_IO, 0x0000000f);
+                mdelay(20);
+                cx_set(GP0_IO, 0x000f000f);
+                break;
         }
 }
 
diff --git a/drivers/media/video/cx23885/cx23885-core.c b/drivers/media/video/cx23885/cx23885-core.c
index d17343ea0d33..6286a9cf957e 100644
--- a/drivers/media/video/cx23885/cx23885-core.c
+++ b/drivers/media/video/cx23885/cx23885-core.c
@@ -76,6 +76,117 @@ LIST_HEAD(cx23885_devlist);
  * 0x00010ea0 0x00010xxx Free
  */
 
+static struct sram_channel cx23885_sram_channels[] = {
+        [SRAM_CH01] = {
+                .name           = "VID A",
+                .cmds_start     = 0x10000,
+                .ctrl_start     = 0x10380,
+                .cdt            = 0x104c0,
+                .fifo_start     = 0x40,
+                .fifo_size      = 0x2800,
+                .ptr1_reg       = DMA1_PTR1,
+                .ptr2_reg       = DMA1_PTR2,
+                .cnt1_reg       = DMA1_CNT1,
+                .cnt2_reg       = DMA1_CNT2,
+        },
+        [SRAM_CH02] = {
+                .name           = "ch2",
+                .cmds_start     = 0x0,
+                .ctrl_start     = 0x0,
+                .cdt            = 0x0,
+                .fifo_start     = 0x0,
+                .fifo_size      = 0x0,
+                .ptr1_reg       = DMA2_PTR1,
+                .ptr2_reg       = DMA2_PTR2,
+                .cnt1_reg       = DMA2_CNT1,
+                .cnt2_reg       = DMA2_CNT2,
+        },
+        [SRAM_CH03] = {
+                .name           = "TS1 B",
+                .cmds_start     = 0x100A0,
+                .ctrl_start     = 0x10400,
+                .cdt            = 0x10580,
+                .fifo_start     = 0x5000,
+                .fifo_size      = 0x1000,
+                .ptr1_reg       = DMA3_PTR1,
+                .ptr2_reg       = DMA3_PTR2,
+                .cnt1_reg       = DMA3_CNT1,
+                .cnt2_reg       = DMA3_CNT2,
+        },
+        [SRAM_CH04] = {
+                .name           = "ch4",
+                .cmds_start     = 0x0,
+                .ctrl_start     = 0x0,
+                .cdt            = 0x0,
+                .fifo_start     = 0x0,
+                .fifo_size      = 0x0,
+                .ptr1_reg       = DMA4_PTR1,
+                .ptr2_reg       = DMA4_PTR2,
+                .cnt1_reg       = DMA4_CNT1,
+                .cnt2_reg       = DMA4_CNT2,
+        },
+        [SRAM_CH05] = {
+                .name           = "ch5",
+                .cmds_start     = 0x0,
+                .ctrl_start     = 0x0,
+                .cdt            = 0x0,
+                .fifo_start     = 0x0,
+                .fifo_size      = 0x0,
+                .ptr1_reg       = DMA5_PTR1,
+                .ptr2_reg       = DMA5_PTR2,
+                .cnt1_reg       = DMA5_CNT1,
+                .cnt2_reg       = DMA5_CNT2,
+        },
+        [SRAM_CH06] = {
+                .name           = "TS2 C",
+                .cmds_start     = 0x10140,
+                .ctrl_start     = 0x10440,
+                .cdt            = 0x105e0,
+                .fifo_start     = 0x6000,
+                .fifo_size      = 0x1000,
+                .ptr1_reg       = DMA5_PTR1,
+                .ptr2_reg       = DMA5_PTR2,
+                .cnt1_reg       = DMA5_CNT1,
+                .cnt2_reg       = DMA5_CNT2,
+        },
+        [SRAM_CH07] = {
+                .name           = "ch7",
+                .cmds_start     = 0x0,
+                .ctrl_start     = 0x0,
+                .cdt            = 0x0,
+                .fifo_start     = 0x0,
+                .fifo_size      = 0x0,
+                .ptr1_reg       = DMA6_PTR1,
+                .ptr2_reg       = DMA6_PTR2,
+                .cnt1_reg       = DMA6_CNT1,
+                .cnt2_reg       = DMA6_CNT2,
+        },
+        [SRAM_CH08] = {
+                .name           = "ch8",
+                .cmds_start     = 0x0,
+                .ctrl_start     = 0x0,
+                .cdt            = 0x0,
+                .fifo_start     = 0x0,
+                .fifo_size      = 0x0,
+                .ptr1_reg       = DMA7_PTR1,
+                .ptr2_reg       = DMA7_PTR2,
+                .cnt1_reg       = DMA7_CNT1,
+                .cnt2_reg       = DMA7_CNT2,
+        },
+        [SRAM_CH09] = {
+                .name           = "ch9",
+                .cmds_start     = 0x0,
+                .ctrl_start     = 0x0,
+                .cdt            = 0x0,
+                .fifo_start     = 0x0,
+                .fifo_size      = 0x0,
+                .ptr1_reg       = DMA8_PTR1,
+                .ptr2_reg       = DMA8_PTR2,
+                .cnt1_reg       = DMA8_CNT1,
+                .cnt2_reg       = DMA8_CNT2,
+        },
+};
+
 static struct sram_channel cx23887_sram_channels[] = {
         [SRAM_CH01] = {
                 .name           = "VID A",
@@ -104,8 +215,8 @@ static struct sram_channel cx23887_sram_channels[] = {
         [SRAM_CH03] = {
                 .name           = "TS1 B",
                 .cmds_start     = 0x100A0,
-                .ctrl_start     = 0x10780,
-                .cdt            = 0x10400,
+                .ctrl_start     = 0x10630,
+                .cdt            = 0x10870,
                 .fifo_start     = 0x5000,
                 .fifo_size      = 0x1000,
                 .ptr1_reg       = DMA3_PTR1,
@@ -140,7 +251,7 @@ static struct sram_channel cx23887_sram_channels[] = {
         [SRAM_CH06] = {
                 .name           = "TS2 C",
                 .cmds_start     = 0x10140,
-                .ctrl_start     = 0x10680,
+                .ctrl_start     = 0x10670,
                 .cdt            = 0x108d0,
                 .fifo_start     = 0x6000,
                 .fifo_size      = 0x1000,
@@ -460,6 +571,7 @@ static void cx23885_reset(struct cx23885_dev *dev)
         cx_write(AUDIO_INT_INT_STAT, 0xffffffff);
         cx_write(AUDIO_EXT_INT_STAT, 0xffffffff);
         cx_write(CLK_DELAY, cx_read(CLK_DELAY) & 0x80000000);
+        cx_write(PAD_CTRL, 0x00500300);
 
         mdelay(100);
 
@@ -625,7 +737,6 @@ static int cx23885_dev_setup(struct cx23885_dev *dev)
         atomic_inc(&dev->refcount);
 
         dev->nr = cx23885_devcount++;
-        dev->sram_channels = cx23887_sram_channels;
         sprintf(dev->name, "cx23885[%d]", dev->nr);
 
         mutex_lock(&devlist);
@@ -637,11 +748,13 @@ static int cx23885_dev_setup(struct cx23885_dev *dev)
                 dev->bridge = CX23885_BRIDGE_887;
                 /* Apply a sensible clock frequency for the PCIe bridge */
                 dev->clk_freq = 25000000;
+                dev->sram_channels = cx23887_sram_channels;
         } else
         if(dev->pci->device == 0x8852) {
                 dev->bridge = CX23885_BRIDGE_885;
                 /* Apply a sensible clock frequency for the PCIe bridge */
                 dev->clk_freq = 28000000;
+                dev->sram_channels = cx23885_sram_channels;
         } else
                 BUG();
 
@@ -1010,8 +1123,9 @@ static void cx23885_tsport_reg_dump(struct cx23885_tsport *port)
                 port->reg_gpcnt_ctl, cx_read(port->reg_gpcnt_ctl));
         dprintk(1, "%s() dma_ctl(0x%08X)        0x%08x\n", __func__,
                 port->reg_dma_ctl, cx_read(port->reg_dma_ctl));
-        dprintk(1, "%s() src_sel(0x%08X)        0x%08x\n", __func__,
-                port->reg_src_sel, cx_read(port->reg_src_sel));
+        if (port->reg_src_sel)
+                dprintk(1, "%s() src_sel(0x%08X)        0x%08x\n", __func__,
+                        port->reg_src_sel, cx_read(port->reg_src_sel));
         dprintk(1, "%s() lngth(0x%08X)          0x%08x\n", __func__,
                 port->reg_lngth, cx_read(port->reg_lngth));
         dprintk(1, "%s() hw_sop_ctrl(0x%08X)    0x%08x\n", __func__,
@@ -1042,6 +1156,9 @@ static int cx23885_start_dma(struct cx23885_tsport *port,
         dprintk(1, "%s() w: %d, h: %d, f: %d\n", __func__,
                 buf->vb.width, buf->vb.height, buf->vb.field);
 
+        /* Stop the fifo and risc engine for this port */
+        cx_clear(port->reg_dma_ctl, port->dma_ctl_val);
+
         /* setup fifo + format */
         cx23885_sram_channel_setup(dev,
                                    &dev->sram_channels[ port->sram_chno ],
@@ -1083,7 +1200,21 @@ static int cx23885_start_dma(struct cx23885_tsport *port,
         cx_write(port->reg_gpcnt_ctl, 3);
         q->count = 1;
 
-        if (cx23885_boards[dev->board].portb & CX23885_MPEG_ENCODER) {
+        /* Set VIDB pins to input */
+        if (cx23885_boards[dev->board].portb == CX23885_MPEG_DVB) {
+                reg = cx_read(PAD_CTRL);
+                reg &= ~0x3; /* Clear TS1_OE & TS1_SOP_OE */
+                cx_write(PAD_CTRL, reg);
+        }
+
+        /* Set VIDC pins to input */
+        if (cx23885_boards[dev->board].portc == CX23885_MPEG_DVB) {
+                reg = cx_read(PAD_CTRL);
+                reg &= ~0x4; /* Clear TS2_SOP_OE */
+                cx_write(PAD_CTRL, reg);
+        }
+
+        if (cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER) {
 
                 reg = cx_read(PAD_CTRL);
                 reg = reg & ~0x1;    /* Clear TS1_OE */
@@ -1133,7 +1264,7 @@ static int cx23885_stop_dma(struct cx23885_tsport *port)
         cx_clear(port->reg_ts_int_msk, port->ts_int_msk_val);
         cx_clear(port->reg_dma_ctl, port->dma_ctl_val);
 
-        if (cx23885_boards[dev->board].portb & CX23885_MPEG_ENCODER) {
+        if (cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER) {
 
                 reg = cx_read(PAD_CTRL);
 
diff --git a/drivers/media/video/cx23885/cx23885-video.c b/drivers/media/video/cx23885/cx23885-video.c
index 043fc4e5c586..ad2235dab5b1 100644
--- a/drivers/media/video/cx23885/cx23885-video.c
+++ b/drivers/media/video/cx23885/cx23885-video.c
@@ -33,6 +33,7 @@
 
 #include "cx23885.h"
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 
 #ifdef CONFIG_VIDEO_V4L1_COMPAT
 /* Include V4L1 specific functions. Should be removed soon */
@@ -326,7 +327,7 @@ struct video_device *cx23885_vdev_init(struct cx23885_dev *dev,
                 return NULL;
         *vfd = *template;
         vfd->minor   = -1;
-        vfd->dev     = &pci->dev;
+        vfd->parent  = &pci->dev;
         vfd->release = video_device_release;
         snprintf(vfd->name, sizeof(vfd->name), "%s %s (%s)",
                  dev->name, type, cx23885_boards[dev->board].name);
@@ -1433,12 +1434,7 @@ static const struct file_operations video_fops = {
         .llseek        = no_llseek,
 };
 
-static struct video_device cx23885_vbi_template;
-static struct video_device cx23885_video_template = {
-        .name                 = "cx23885-video",
-        .type                 = VID_TYPE_CAPTURE|VID_TYPE_TUNER|VID_TYPE_SCALES,
-        .fops                 = &video_fops,
-        .minor                = -1,
+static const struct v4l2_ioctl_ops video_ioctl_ops = {
         .vidioc_querycap      = vidioc_querycap,
         .vidioc_enum_fmt_vid_cap  = vidioc_enum_fmt_vid_cap,
         .vidioc_g_fmt_vid_cap     = vidioc_g_fmt_vid_cap,
@@ -1471,6 +1467,14 @@ static struct video_device cx23885_video_template = {
         .vidioc_g_register    = vidioc_g_register,
         .vidioc_s_register    = vidioc_s_register,
 #endif
+};
+
+static struct video_device cx23885_vbi_template;
+static struct video_device cx23885_video_template = {
+        .name                 = "cx23885-video",
+        .fops                 = &video_fops,
+        .minor                = -1,
+        .ioctl_ops            = &video_ioctl_ops,
         .tvnorms              = CX23885_NORMS,
         .current_norm         = V4L2_STD_NTSC_M,
 };
@@ -1512,7 +1516,6 @@ int cx23885_video_register(struct cx23885_dev *dev)
         memcpy(&cx23885_vbi_template, &cx23885_video_template,
                 sizeof(cx23885_vbi_template));
         strcpy(cx23885_vbi_template.name, "cx23885-vbi");
-        cx23885_vbi_template.type = VID_TYPE_TELETEXT|VID_TYPE_TUNER;
 
         dev->tvnorm = cx23885_video_template.current_norm;
 
diff --git a/drivers/media/video/cx25840/Kconfig b/drivers/media/video/cx25840/Kconfig
index 448f4cd0ce34..de515dadadc2 100644
--- a/drivers/media/video/cx25840/Kconfig
+++ b/drivers/media/video/cx25840/Kconfig
@@ -1,8 +1,6 @@
 config VIDEO_CX25840
         tristate "Conexant CX2584x audio/video decoders"
         depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
-        depends on HOTPLUG # due to FW_LOADER
-        select FW_LOADER
         ---help---
           Support for the Conexant CX2584x audio/video decoders.
 
diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c
index e7bf4f4c1319..209d3bcb5dbb 100644
--- a/drivers/media/video/cx25840/cx25840-core.c
+++ b/drivers/media/video/cx25840/cx25840-core.c
@@ -50,7 +50,7 @@ MODULE_LICENSE("GPL");
 
 static unsigned short normal_i2c[] = { 0x88 >> 1, I2C_CLIENT_END };
 
-int cx25840_debug;
+static int cx25840_debug;
 
 module_param_named(debug,cx25840_debug, int, 0644);
 
diff --git a/drivers/media/video/cx25840/cx25840-core.h b/drivers/media/video/cx25840/cx25840-core.h
index 72916ba975a8..b87337e590b4 100644
--- a/drivers/media/video/cx25840/cx25840-core.h
+++ b/drivers/media/video/cx25840/cx25840-core.h
@@ -24,8 +24,6 @@
 #include <linux/videodev2.h>
 #include <linux/i2c.h>
 
-extern int cx25840_debug;
-
 /* ENABLE_PVR150_WORKAROUND activates a workaround for a hardware bug that is
    present in Hauppauge PVR-150 (and possibly PVR-500) cards that have
    certain NTSC tuners (tveeprom tuner model numbers 85, 99 and 112). The
diff --git a/drivers/media/video/cx88/Kconfig b/drivers/media/video/cx88/Kconfig
index 10e20d8196dc..9dd7bdf659b9 100644
--- a/drivers/media/video/cx88/Kconfig
+++ b/drivers/media/video/cx88/Kconfig
@@ -33,9 +33,8 @@ config VIDEO_CX88_ALSA
 
 config VIDEO_CX88_BLACKBIRD
         tristate "Blackbird MPEG encoder support (cx2388x + cx23416)"
-        depends on VIDEO_CX88 && HOTPLUG
+        depends on VIDEO_CX88
         select VIDEO_CX2341X
-        select FW_LOADER
         ---help---
           This adds support for MPEG encoder cards based on the
           Blackbird reference design, using the Conexant 2388x
diff --git a/drivers/media/video/cx88/cx88-blackbird.c b/drivers/media/video/cx88/cx88-blackbird.c
index bfdca5847764..9a1374a38ec7 100644
--- a/drivers/media/video/cx88/cx88-blackbird.c
+++ b/drivers/media/video/cx88/cx88-blackbird.c
@@ -33,6 +33,7 @@
 #include <linux/device.h>
 #include <linux/firmware.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <media/cx2341x.h>
 
 #include "cx88.h"
@@ -1174,12 +1175,7 @@ static const struct file_operations mpeg_fops =
         .llseek        = no_llseek,
 };
 
-static struct video_device cx8802_mpeg_template =
-{
-        .name                 = "cx8802",
-        .type                 = VID_TYPE_CAPTURE|VID_TYPE_TUNER|VID_TYPE_SCALES|VID_TYPE_MPEG_ENCODER,
-        .fops                 = &mpeg_fops,
-        .minor                = -1,
+static const struct v4l2_ioctl_ops mpeg_ioctl_ops = {
         .vidioc_querymenu     = vidioc_querymenu,
         .vidioc_querycap      = vidioc_querycap,
         .vidioc_enum_fmt_vid_cap  = vidioc_enum_fmt_vid_cap,
@@ -1207,6 +1203,13 @@ static struct video_device cx8802_mpeg_template =
         .vidioc_g_tuner       = vidioc_g_tuner,
         .vidioc_s_tuner       = vidioc_s_tuner,
         .vidioc_s_std         = vidioc_s_std,
+};
+
+static struct video_device cx8802_mpeg_template = {
+        .name                 = "cx8802",
+        .fops                 = &mpeg_fops,
+        .ioctl_ops            = &mpeg_ioctl_ops,
+        .minor                = -1,
         .tvnorms              = CX88_NORMS,
         .current_norm         = V4L2_STD_NTSC_M,
 };
diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c
index fa6d398e97b9..de199a206a15 100644
--- a/drivers/media/video/cx88/cx88-cards.c
+++ b/drivers/media/video/cx88/cx88-cards.c
@@ -1348,7 +1348,7 @@ static const struct cx88_board cx88_boards[] = {
                 .tuner_addr     = ADDR_UNSET,
                 .radio_addr     = ADDR_UNSET,
                 .tda9887_conf   = TDA9887_PRESENT,
-                .audio_chip     = AUDIO_CHIP_WM8775,
+                .audio_chip     = V4L2_IDENT_WM8775,
                 .input          = {{
                         .type   = CX88_VMUX_TELEVISION,
                         .vmux   = 0,
diff --git a/drivers/media/video/cx88/cx88-core.c b/drivers/media/video/cx88/cx88-core.c
index 60eeda3057e9..d656fec59010 100644
--- a/drivers/media/video/cx88/cx88-core.c
+++ b/drivers/media/video/cx88/cx88-core.c
@@ -40,6 +40,7 @@
 
 #include "cx88.h"
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 
 MODULE_DESCRIPTION("v4l2 driver module for cx2388x based TV cards");
 MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
@@ -1006,7 +1007,7 @@ struct video_device *cx88_vdev_init(struct cx88_core *core,
                 return NULL;
         *vfd = *template;
         vfd->minor   = -1;
-        vfd->dev     = &pci->dev;
+        vfd->parent  = &pci->dev;
         vfd->release = video_device_release;
         snprintf(vfd->name, sizeof(vfd->name), "%s %s (%s)",
                  core->name, type, core->board.name);
diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c
index 0fed5cd2ccea..ef4d56ea0027 100644
--- a/drivers/media/video/cx88/cx88-video.c
+++ b/drivers/media/video/cx88/cx88-video.c
@@ -39,6 +39,7 @@
 
 #include "cx88.h"
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 
 #ifdef CONFIG_VIDEO_V4L1_COMPAT
 /* Include V4L1 specific functions. Should be removed soon */
@@ -447,7 +448,7 @@ int cx88_video_mux(struct cx88_core *core, unsigned int input)
                    the initialization. Some boards may use different
                    routes for different inputs. HVR-1300 surely does */
                 if (core->board.audio_chip &&
-                    core->board.audio_chip == AUDIO_CHIP_WM8775) {
+                    core->board.audio_chip == V4L2_IDENT_WM8775) {
                         struct v4l2_routing route;
 
                         route.input = INPUT(input).audioroute;
@@ -1682,13 +1683,7 @@ static const struct file_operations video_fops =
         .llseek        = no_llseek,
 };
 
-static struct video_device cx8800_vbi_template;
-static struct video_device cx8800_video_template =
-{
-        .name                 = "cx8800-video",
-        .type                 = VID_TYPE_CAPTURE|VID_TYPE_TUNER|VID_TYPE_SCALES,
-        .fops                 = &video_fops,
-        .minor                = -1,
+static const struct v4l2_ioctl_ops video_ioctl_ops = {
         .vidioc_querycap      = vidioc_querycap,
         .vidioc_enum_fmt_vid_cap  = vidioc_enum_fmt_vid_cap,
         .vidioc_g_fmt_vid_cap     = vidioc_g_fmt_vid_cap,
@@ -1721,6 +1716,15 @@ static struct video_device cx8800_video_template =
         .vidioc_g_register    = vidioc_g_register,
         .vidioc_s_register    = vidioc_s_register,
 #endif
+};
+
+static struct video_device cx8800_vbi_template;
+
+static struct video_device cx8800_video_template = {
+        .name                 = "cx8800-video",
+        .fops                 = &video_fops,
+        .minor                = -1,
+        .ioctl_ops            = &video_ioctl_ops,
         .tvnorms              = CX88_NORMS,
         .current_norm         = V4L2_STD_NTSC_M,
 };
@@ -1735,12 +1739,7 @@ static const struct file_operations radio_fops =
         .llseek        = no_llseek,
 };
 
-static struct video_device cx8800_radio_template =
-{
-        .name                 = "cx8800-radio",
-        .type                 = VID_TYPE_TUNER,
-        .fops                 = &radio_fops,
-        .minor                = -1,
+static const struct v4l2_ioctl_ops radio_ioctl_ops = {
         .vidioc_querycap      = radio_querycap,
         .vidioc_g_tuner       = radio_g_tuner,
         .vidioc_enum_input    = radio_enum_input,
@@ -1759,6 +1758,13 @@ static struct video_device cx8800_radio_template =
 #endif
 };
 
+static struct video_device cx8800_radio_template = {
+        .name                 = "cx8800-radio",
+        .fops                 = &radio_fops,
+        .minor                = -1,
+        .ioctl_ops            = &radio_ioctl_ops,
+};
+
 /* ----------------------------------------------------------- */
 
 static void cx8800_unregister_video(struct cx8800_dev *dev)
@@ -1830,7 +1836,6 @@ static int __devinit cx8800_initdev(struct pci_dev *pci_dev,
         memcpy( &cx8800_vbi_template, &cx8800_video_template,
                 sizeof(cx8800_vbi_template) );
         strcpy(cx8800_vbi_template.name,"cx8800-vbi");
-        cx8800_vbi_template.type = VID_TYPE_TELETEXT|VID_TYPE_TUNER;
 
         /* initialize driver struct */
         spin_lock_init(&dev->slock);
@@ -1866,7 +1871,7 @@ static int __devinit cx8800_initdev(struct pci_dev *pci_dev,
 
         /* load and configure helper modules */
 
-        if (core->board.audio_chip == AUDIO_CHIP_WM8775)
+        if (core->board.audio_chip == V4L2_IDENT_WM8775)
                 request_module("wm8775");
 
         switch (core->boardnr) {
diff --git a/drivers/media/video/cx88/cx88.h b/drivers/media/video/cx88/cx88.h
index 14ac173f4071..54fe65094711 100644
--- a/drivers/media/video/cx88/cx88.h
+++ b/drivers/media/video/cx88/cx88.h
@@ -29,8 +29,8 @@
 #include <media/tuner.h>
 #include <media/tveeprom.h>
 #include <media/videobuf-dma-sg.h>
+#include <media/v4l2-chip-ident.h>
 #include <media/cx2341x.h>
-#include <media/audiochip.h>
 #if defined(CONFIG_VIDEO_CX88_DVB) || defined(CONFIG_VIDEO_CX88_DVB_MODULE)
 #include <media/videobuf-dvb.h>
 #endif
@@ -252,7 +252,7 @@ struct cx88_board {
         struct cx88_input       input[MAX_CX88_INPUT];
         struct cx88_input       radio;
         enum cx88_board_type    mpeg;
-        enum audiochip          audio_chip;
+        unsigned int            audio_chip;
 };
 
 struct cx88_subid {
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index 05f0d5a15058..476ae44a62d2 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -32,8 +32,8 @@
 #include <media/saa7115.h>
 #include <media/tvp5150.h>
 #include <media/tveeprom.h>
-#include <media/audiochip.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-chip-ident.h>
 
 #include "em28xx.h"
 
@@ -52,6 +52,15 @@ struct em28xx_hash_table {
 };
 
 struct em28xx_board em28xx_boards[] = {
+        [EM2750_BOARD_UNKNOWN] = {
+                .name          = "Unknown EM2750/EM2751 webcam grabber",
+                .vchannels     = 1,
+                .input         = { {
+                        .type     = EM28XX_VMUX_COMPOSITE1,
+                        .vmux     = 0,
+                        .amux     = 0,
+                } },
+        },
         [EM2800_BOARD_UNKNOWN] = {
                 .name         = "Unknown EM2800 video grabber",
                 .is_em2800    = 1,
@@ -73,6 +82,39 @@ struct em28xx_board em28xx_boards[] = {
                 .is_em2800    = 0,
                 .tuner_type   = TUNER_ABSENT,
         },
+        [EM2750_BOARD_DLCW_130] = {
+                /* Beijing Huaqi Information Digital Technology Co., Ltd */
+                .name          = "Huaqi DLCW-130",
+                .valid         = EM28XX_BOARD_NOT_VALIDATED,
+                .vchannels     = 1,
+                .input         = { {
+                        .type     = EM28XX_VMUX_COMPOSITE1,
+                        .vmux     = 0,
+                        .amux     = 0,
+                } },
+        },
+        [EM2800_BOARD_KWORLD_USB2800] = {
+                .name         = "Kworld USB2800",
+                .valid        = EM28XX_BOARD_NOT_VALIDATED,
+                .is_em2800    = 1,
+                .vchannels    = 3,
+                .tuner_type   = TUNER_PHILIPS_FCV1236D,
+                .tda9887_conf = TDA9887_PRESENT,
+                .decoder      = EM28XX_SAA7113,
+                .input          = { {
+                        .type     = EM28XX_VMUX_TELEVISION,
+                        .vmux     = SAA7115_COMPOSITE2,
+                        .amux     = 0,
+                }, {
+                        .type     = EM28XX_VMUX_COMPOSITE1,
+                        .vmux     = SAA7115_COMPOSITE0,
+                        .amux     = 1,
+                }, {
+                        .type     = EM28XX_VMUX_SVIDEO,
+                        .vmux     = SAA7115_SVIDEO3,
+                        .amux     = 1,
+                } },
+        },
         [EM2820_BOARD_KWORLD_PVRTV2800RF] = {
                 .name         = "Kworld PVR TV 2800 RF",
                 .is_em2800    = 0,
@@ -151,6 +193,376 @@ struct em28xx_board em28xx_boards[] = {
                                         MSP_DSP_IN_SCART, MSP_DSP_IN_SCART),
                 } },
         },
+        [EM2820_BOARD_DLINK_USB_TV] = {
+                .name         = "D-Link DUB-T210 TV Tuner",
+                .valid        = EM28XX_BOARD_NOT_VALIDATED,
+                .vchannels    = 3,
+                .is_em2800    = 0,
+                .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
+                .tda9887_conf = TDA9887_PRESENT,
+                .decoder      = EM28XX_SAA7113,
+                .input          = { {
+                        .type     = EM28XX_VMUX_TELEVISION,
+                        .vmux     = SAA7115_COMPOSITE2,
+                        .amux     = 1,
+                }, {
+                        .type     = EM28XX_VMUX_COMPOSITE1,
+                        .vmux     = SAA7115_COMPOSITE0,
+                        .amux     = 1,
+                }, {
+                        .type     = EM28XX_VMUX_SVIDEO,
+                        .vmux     = SAA7115_SVIDEO3,
+                        .amux     = 1,
+                } },
+        },
+        [EM2820_BOARD_HERCULES_SMART_TV_USB2] = {
+                .name         = "Hercules Smart TV USB 2.0",
+                .valid        = EM28XX_BOARD_NOT_VALIDATED,
+                .vchannels    = 3,
+                .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
+                .tda9887_conf = TDA9887_PRESENT,
+                .decoder      = EM28XX_SAA7113,
+                .input        = { {
+                        .type     = EM28XX_VMUX_TELEVISION,
+                        .vmux     = SAA7115_COMPOSITE2,
+                        .amux     = 1,
+                }, {
+                        .type     = EM28XX_VMUX_COMPOSITE1,
+                        .vmux     = SAA7115_COMPOSITE0,
+                        .amux     = 1,
+                }, {
+                        .type     = EM28XX_VMUX_SVIDEO,
+                        .vmux     = SAA7115_SVIDEO3,
+                        .amux     = 1,
+                } },
+        },
+        [EM2820_BOARD_PINNACLE_USB_2_FM1216ME] = {
+                .name         = "Pinnacle PCTV USB 2 (Philips FM1216ME)",
+                .valid        = EM28XX_BOARD_NOT_VALIDATED,
+                .vchannels    = 3,
+                .is_em2800    = 0,
+                .tuner_type   = TUNER_PHILIPS_FM1216ME_MK3,
+                .tda9887_conf = TDA9887_PRESENT,
+                .decoder      = EM28XX_SAA7113,
+                .input          = { {
+                        .type     = EM28XX_VMUX_TELEVISION,
+                        .vmux     = SAA7115_COMPOSITE2,
+                        .amux     = 0,
+                }, {
+                        .type     = EM28XX_VMUX_COMPOSITE1,
+                        .vmux     = SAA7115_COMPOSITE0,
+                        .amux     = 1,
+                }, {
+                        .type     = EM28XX_VMUX_SVIDEO,
+                        .vmux     = SAA7115_SVIDEO3,
+                        .amux     = 1,
+                } },
+        },
+        [EM2820_BOARD_GADMEI_UTV310] = {
+                .name         = "Gadmei UTV310",
+                .valid        = EM28XX_BOARD_NOT_VALIDATED,
+                .vchannels    = 3,
+                .tuner_type   = TUNER_TNF_5335MF,
+                .tda9887_conf = TDA9887_PRESENT,
+                .decoder      = EM28XX_SAA7113,
+                .input          = { {
+                        .type     = EM28XX_VMUX_TELEVISION,
+                        .vmux     = SAA7115_COMPOSITE1,
+                        .amux     = 1,
+                }, {
+                        .type     = EM28XX_VMUX_COMPOSITE1,
+                        .vmux     = SAA7115_COMPOSITE0,
+                        .amux     = 1,
+                }, {
+                        .type     = EM28XX_VMUX_SVIDEO,
+                        .vmux     = SAA7115_SVIDEO3,
+                        .amux     = 1,
+                } },
+        },
+        [EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE] = {
+                .name         = "Leadtek Winfast USB II Deluxe",
+                .valid        = EM28XX_BOARD_NOT_VALIDATED,
+                .vchannels    = 3,
+                .tuner_type   = TUNER_PHILIPS_FM1216ME_MK3,
+                .tda9887_conf = TDA9887_PRESENT,
+                .decoder      = EM28XX_SAA7114,
+                .input          = { {
+                        .type     = EM28XX_VMUX_TELEVISION,
+                        .vmux     = 2,
+                        .amux     = 0,
+                }, {
+                        .type     = EM28XX_VMUX_COMPOSITE1,
+                        .vmux     = 0,
+                        .amux     = 1,
+                }, {
+                        .type     = EM28XX_VMUX_SVIDEO,
+                        .vmux     = 9,
+                        .amux     = 1,
+                } },
+        },
+        [EM2820_BOARD_PINNACLE_DVC_100] = {
+                .name         = "Pinnacle Dazzle DVC 100",
+                .valid        = EM28XX_BOARD_NOT_VALIDATED,
+                .vchannels    = 3,
+                .decoder      = EM28XX_SAA7113,
+                .input          = { {
+                        .type     = EM28XX_VMUX_COMPOSITE1,
+                        .vmux     = SAA7115_COMPOSITE0,
+                        .amux     = 1,
+                }, {
+                        .type     = EM28XX_VMUX_SVIDEO,
+                        .vmux     = SAA7115_SVIDEO3,
+                        .amux     = 1,
+                } },
+        },
+        [EM2820_BOARD_VIDEOLOGY_20K14XUSB] = {
+                .name          = "Videology 20K14XUSB USB2.0",
+                .valid        = EM28XX_BOARD_NOT_VALIDATED,
+                .vchannels     = 1,
+                .input         = { {
+                        .type     = EM28XX_VMUX_COMPOSITE1,
+                        .vmux     = 0,
+                        .amux     = 0,
+                } },
+        },
+        [EM2821_BOARD_PROLINK_PLAYTV_USB2] = {
+                .name         = "SIIG AVTuner-PVR/Prolink PlayTV USB 2.0",
+                .valid        = EM28XX_BOARD_NOT_VALIDATED,
+                .vchannels    = 3,
+                .is_em2800    = 0,
+                .tuner_type   = TUNER_LG_PAL_NEW_TAPC,  /* unknown? */
+                .tda9887_conf = TDA9887_PRESENT,        /* unknown? */
+                .decoder      = EM28XX_SAA7113,
+                .input          = { {
+                        .type     = EM28XX_VMUX_TELEVISION,
+                        .vmux     = SAA7115_COMPOSITE2,
+                        .amux     = 1,
+                }, {
+                        .type     = EM28XX_VMUX_COMPOSITE1,
+                        .vmux     = SAA7115_COMPOSITE0,
+                        .amux     = 1,
+                }, {
+                        .type     = EM28XX_VMUX_SVIDEO,
+                        .vmux     = SAA7115_SVIDEO3,
+                        .amux     = 1,
+                } },
+        },
+        [EM2821_BOARD_SUPERCOMP_USB_2] = {
+                .name         = "Supercomp USB 2.0 TV",
+                .valid        = EM28XX_BOARD_NOT_VALIDATED,
+                .vchannels    = 3,
+                .is_em2800    = 0,
+                .tuner_type   = TUNER_PHILIPS_FM1236_MK3,
+                .tda9887_conf = TDA9887_PRESENT |
+                                TDA9887_PORT1_ACTIVE |
+                                TDA9887_PORT2_ACTIVE,
+                .decoder      = EM28XX_SAA7113,
+                .input          = { {
+                        .type     = EM28XX_VMUX_TELEVISION,
+                        .vmux     = SAA7115_COMPOSITE2,
+                        .amux     = 1,
+                }, {
+                        .type     = EM28XX_VMUX_COMPOSITE1,
+                        .vmux     = SAA7115_COMPOSITE0,
+                        .amux     = 0,
+                }, {
+                        .type     = EM28XX_VMUX_SVIDEO,
+                        .vmux     = SAA7115_SVIDEO3,
+                        .amux     = 1,
+                } },
+        },
+        [EM2821_BOARD_USBGEAR_VD204] = {
+                .name          = "Usbgear VD204v9",
+                .valid        = EM28XX_BOARD_NOT_VALIDATED,
+                .vchannels     = 2,
+                .decoder       = EM28XX_SAA7113,
+                .input          = { {
+                        .type  = EM28XX_VMUX_COMPOSITE1,
+                        .vmux  = SAA7115_COMPOSITE0,
+                        .amux  = 1,
+                }, {
+                        .type  = EM28XX_VMUX_SVIDEO,
+                        .vmux  = SAA7115_SVIDEO3,
+                        .amux  = 1,
+                } },
+        },
+        [EM2860_BOARD_NETGMBH_CAM] = {
+                /* Beijing Huaqi Information Digital Technology Co., Ltd */
+                .name          = "NetGMBH Cam",
+                .valid       = EM28XX_BOARD_NOT_VALIDATED,
+                .vchannels     = 1,
+                .input         = { {
+                        .type     = EM28XX_VMUX_COMPOSITE1,
+                        .vmux     = 0,
+                        .amux     = 0,
+                } },
+        },
+        [EM2860_BOARD_TYPHOON_DVD_MAKER] = {
+                .name          = "Typhoon DVD Maker",
+                .valid        = EM28XX_BOARD_NOT_VALIDATED,
+                .vchannels     = 2,
+                .decoder       = EM28XX_SAA7113,
+                .input          = { {
+                        .type  = EM28XX_VMUX_COMPOSITE1,
+                        .vmux  = SAA7115_COMPOSITE0,
+                        .amux  = 1,
+                }, {
+                        .type  = EM28XX_VMUX_SVIDEO,
+                        .vmux  = SAA7115_SVIDEO3,
+                        .amux  = 1,
+                } },
+        },
+        [EM2860_BOARD_GADMEI_UTV330] = {
+                .name         = "Gadmei UTV330",
+                .valid        = EM28XX_BOARD_NOT_VALIDATED,
+                .vchannels    = 3,
+                .tuner_type   = TUNER_TNF_5335MF,
+                .tda9887_conf = TDA9887_PRESENT,
+                .decoder      = EM28XX_SAA7113,
+                .input          = { {
+                        .type     = EM28XX_VMUX_TELEVISION,
+                        .vmux     = SAA7115_COMPOSITE2,
+                        .amux     = 0,
+                }, {
+                        .type     = EM28XX_VMUX_COMPOSITE1,
+                        .vmux     = SAA7115_COMPOSITE0,
+                        .amux     = 1,
+                }, {
+                        .type     = EM28XX_VMUX_SVIDEO,
+                        .vmux     = SAA7115_SVIDEO3,
+                        .amux     = 1,
+                } },
+        },
+        [EM2860_BOARD_TERRATEC_HYBRID_XS] = {
+                .name         = "Terratec Cinergy A Hybrid XS",
+                .valid        = EM28XX_BOARD_NOT_VALIDATED,
+                .vchannels    = 3,
+                .tuner_type   = TUNER_XC2028,
+                .decoder      = EM28XX_TVP5150,
+                .input          = { {
+                        .type     = EM28XX_VMUX_TELEVISION,
+                        .vmux     = TVP5150_COMPOSITE0,
+                        .amux     = 0,
+                }, {
+                        .type     = EM28XX_VMUX_COMPOSITE1,
+                        .vmux     = TVP5150_COMPOSITE1,
+                        .amux     = 1,
+                }, {
+                        .type     = EM28XX_VMUX_SVIDEO,
+                        .vmux     = TVP5150_SVIDEO,
+                        .amux     = 1,
+                } },
+        },
+        [EM2861_BOARD_KWORLD_PVRTV_300U] = {
+                .name         = "KWorld PVRTV 300U",
+                .valid        = EM28XX_BOARD_NOT_VALIDATED,
+                .vchannels    = 3,
+                .tuner_type   = TUNER_XC2028,
+                .decoder      = EM28XX_TVP5150,
+                .input          = { {
+                        .type     = EM28XX_VMUX_TELEVISION,
+                        .vmux     = TVP5150_COMPOSITE0,
+                        .amux     = 0,
+                }, {
+                        .type     = EM28XX_VMUX_COMPOSITE1,
+                        .vmux     = TVP5150_COMPOSITE1,
+                        .amux     = 1,
+                }, {
+                        .type     = EM28XX_VMUX_SVIDEO,
+                        .vmux     = TVP5150_SVIDEO,
+                        .amux     = 1,
+                } },
+        },
+        [EM2861_BOARD_YAKUMO_MOVIE_MIXER] = {
+                .name          = "Yakumo MovieMixer",
+                .valid       = EM28XX_BOARD_NOT_VALIDATED,
+                .vchannels     = 1,
+                .decoder       = EM28XX_TVP5150,
+                .input         = { {
+                        .type     = EM28XX_VMUX_TELEVISION,
+                        .vmux     = TVP5150_COMPOSITE0,
+                        .amux     = 0,
+                }, {
+                        .type     = EM28XX_VMUX_COMPOSITE1,
+                        .vmux     = TVP5150_COMPOSITE1,
+                        .amux     = 1,
+                }, {
+                        .type     = EM28XX_VMUX_SVIDEO,
+                        .vmux     = TVP5150_SVIDEO,
+                        .amux     = 1,
+                } },
+        },
+        [EM2861_BOARD_PLEXTOR_PX_TV100U] = {
+                .name         = "Plextor ConvertX PX-TV100U",
+                .valid        = EM28XX_BOARD_NOT_VALIDATED,
+                .vchannels    = 3,
+                .tuner_type   = TUNER_TNF_5335MF,
+                .tda9887_conf = TDA9887_PRESENT,
+                .decoder      = EM28XX_TVP5150,
+                .input          = { {
+                        .type     = EM28XX_VMUX_TELEVISION,
+                        .vmux     = TVP5150_COMPOSITE0,
+                        .amux     = 1,
+                }, {
+                        .type     = EM28XX_VMUX_COMPOSITE1,
+                        .vmux     = TVP5150_COMPOSITE1,
+                        .amux     = 1,
+                }, {
+                        .type     = EM28XX_VMUX_SVIDEO,
+                        .vmux     = TVP5150_SVIDEO,
+                        .amux     = 1,
+                } },
+        },
+        [EM2870_BOARD_TERRATEC_XS] = {
+                .name         = "Terratec Cinergy T XS",
+                .valid        = EM28XX_BOARD_NOT_VALIDATED,
+                .tuner_type   = TUNER_XC2028,
+        },
+        [EM2870_BOARD_TERRATEC_XS_MT2060] = {
+                .name         = "Terratec Cinergy T XS (MT2060)",
+                .valid        = EM28XX_BOARD_NOT_VALIDATED,
+                .tuner_type   = TUNER_ABSENT, /* MT2060 */
+        },
+        [EM2870_BOARD_KWORLD_350U] = {
+                .name         = "Kworld 350 U DVB-T",
+                .valid        = EM28XX_BOARD_NOT_VALIDATED,
+                .tuner_type   = TUNER_XC2028,
+        },
+        [EM2870_BOARD_KWORLD_355U] = {
+                .name         = "Kworld 355 U DVB-T",
+                .valid        = EM28XX_BOARD_NOT_VALIDATED,
+        },
+        [EM2870_BOARD_PINNACLE_PCTV_DVB] = {
+                .name         = "Pinnacle PCTV DVB-T",
+                .valid        = EM28XX_BOARD_NOT_VALIDATED,
+                .tuner_type   = TUNER_ABSENT, /* MT2060 */
+        },
+        [EM2870_BOARD_COMPRO_VIDEOMATE] = {
+                .name         = "Compro, VideoMate U3",
+                .valid        = EM28XX_BOARD_NOT_VALIDATED,
+                .tuner_type   = TUNER_ABSENT, /* MT2060 */
+        },
+        [EM2880_BOARD_TERRATEC_HYBRID_XS_FR] = {
+                .name         = "Terratec Hybrid XS Secam",
+                .valid        = EM28XX_BOARD_NOT_VALIDATED,
+                .vchannels    = 3,
+                .has_msp34xx  = 1,
+                .tuner_type   = TUNER_XC2028,
+                .decoder      = EM28XX_TVP5150,
+                .input          = { {
+                        .type     = EM28XX_VMUX_TELEVISION,
+                        .vmux     = TVP5150_COMPOSITE0,
+                        .amux     = 0,
+                }, {
+                        .type     = EM28XX_VMUX_COMPOSITE1,
+                        .vmux     = TVP5150_COMPOSITE1,
+                        .amux     = 1,
+                }, {
+                        .type     = EM28XX_VMUX_SVIDEO,
+                        .vmux     = TVP5150_SVIDEO,
+                        .amux     = 1,
+                } },
+        },
         [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900] = {
                 .name         = "Hauppauge WinTV HVR 900",
                 .vchannels    = 3,
@@ -194,7 +606,7 @@ struct em28xx_board em28xx_boards[] = {
                         .amux     = 1,
                 } },
         },
-        [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950] = {
+        [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950] = {
                 .name           = "Hauppauge WinTV HVR 950",
                 .vchannels      = 3,
                 .tda9887_conf   = TDA9887_PRESENT,
@@ -240,12 +652,36 @@ struct em28xx_board em28xx_boards[] = {
                         .amux     = 1,
                 } },
         },
+        [EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600] = {
+                .name           = "AMD ATI TV Wonder HD 600",
+                .vchannels      = 3,
+                .tda9887_conf   = TDA9887_PRESENT,
+                .tuner_type     = TUNER_XC2028,
+                .mts_firmware   = 1,
+                .has_12mhz_i2s  = 1,
+                .has_dvb        = 1,
+                .decoder        = EM28XX_TVP5150,
+                .input          = { {
+                        .type     = EM28XX_VMUX_TELEVISION,
+                        .vmux     = TVP5150_COMPOSITE0,
+                        .amux     = 0,
+                }, {
+                        .type     = EM28XX_VMUX_COMPOSITE1,
+                        .vmux     = TVP5150_COMPOSITE1,
+                        .amux     = 1,
+                }, {
+                        .type     = EM28XX_VMUX_SVIDEO,
+                        .vmux     = TVP5150_SVIDEO,
+                        .amux     = 1,
+                } },
+        },
         [EM2880_BOARD_TERRATEC_HYBRID_XS] = {
                 .name         = "Terratec Hybrid XS",
                 .vchannels    = 3,
                 .tda9887_conf = TDA9887_PRESENT,
                 .tuner_type   = TUNER_XC2028,
                 .decoder      = EM28XX_TVP5150,
+                .has_dvb        = 1,
                 .input          = { {
                         .type     = EM28XX_VMUX_TELEVISION,
                         .vmux     = TVP5150_COMPOSITE0,
@@ -328,6 +764,21 @@ struct em28xx_board em28xx_boards[] = {
                         .amux     = 1,
                 } },
         },
+        [EM2800_BOARD_GRABBEEX_USB2800] = {
+                .name         = "eMPIA Technology, Inc. GrabBeeX+ Video Encoder",
+                .is_em2800    = 1,
+                .vchannels    = 2,
+                .decoder      = EM28XX_SAA7113,
+                .input          = { {
+                        .type     = EM28XX_VMUX_COMPOSITE1,
+                        .vmux     = SAA7115_COMPOSITE0,
+                        .amux     = 1,
+                }, {
+                        .type     = EM28XX_VMUX_SVIDEO,
+                        .vmux     = SAA7115_SVIDEO3,
+                        .amux     = 1,
+                } },
+        },
         [EM2800_BOARD_LEADTEK_WINFAST_USBII] = {
                 .name         = "Leadtek Winfast USB II",
                 .is_em2800    = 1,
@@ -439,13 +890,232 @@ struct em28xx_board em28xx_boards[] = {
                         .amux     = 0,
                 } },
         },
+        [EM2880_BOARD_MSI_DIGIVOX_AD] = {
+                .name         = "MSI DigiVox A/D",
+                .valid        = EM28XX_BOARD_NOT_VALIDATED,
+                .vchannels    = 3,
+                .tuner_type   = TUNER_XC2028,
+                .decoder      = EM28XX_TVP5150,
+                .input          = { {
+                        .type     = EM28XX_VMUX_TELEVISION,
+                        .vmux     = TVP5150_COMPOSITE0,
+                        .amux     = 0,
+                }, {
+                        .type     = EM28XX_VMUX_COMPOSITE1,
+                        .vmux     = TVP5150_COMPOSITE1,
+                        .amux     = 1,
+                }, {
+                        .type     = EM28XX_VMUX_SVIDEO,
+                        .vmux     = TVP5150_SVIDEO,
+                        .amux     = 1,
+                } },
+        },
+        [EM2880_BOARD_MSI_DIGIVOX_AD_II] = {
+                .name         = "MSI DigiVox A/D II",
+                .valid        = EM28XX_BOARD_NOT_VALIDATED,
+                .vchannels    = 3,
+                .tuner_type   = TUNER_XC2028,
+                .decoder      = EM28XX_TVP5150,
+                .input          = { {
+                        .type     = EM28XX_VMUX_TELEVISION,
+                        .vmux     = TVP5150_COMPOSITE0,
+                        .amux     = 0,
+                }, {
+                        .type     = EM28XX_VMUX_COMPOSITE1,
+                        .vmux     = TVP5150_COMPOSITE1,
+                        .amux     = 1,
+                }, {
+                        .type     = EM28XX_VMUX_SVIDEO,
+                        .vmux     = TVP5150_SVIDEO,
+                        .amux     = 1,
+                } },
+        },
+        [EM2880_BOARD_KWORLD_DVB_305U] = {
+                .name         = "KWorld DVB-T 305U",
+                .valid        = EM28XX_BOARD_NOT_VALIDATED,
+                .vchannels    = 3,
+                .tuner_type   = TUNER_XC2028,
+                .decoder      = EM28XX_TVP5150,
+                .input          = { {
+                        .type     = EM28XX_VMUX_TELEVISION,
+                        .vmux     = TVP5150_COMPOSITE0,
+                        .amux     = 0,
+                }, {
+                        .type     = EM28XX_VMUX_COMPOSITE1,
+                        .vmux     = TVP5150_COMPOSITE1,
+                        .amux     = 1,
+                }, {
+                        .type     = EM28XX_VMUX_SVIDEO,
+                        .vmux     = TVP5150_SVIDEO,
+                        .amux     = 1,
+                } },
+        },
+        [EM2880_BOARD_KWORLD_DVB_310U] = {
+                .name         = "KWorld DVB-T 310U",
+                .valid        = EM28XX_BOARD_NOT_VALIDATED,
+                .vchannels    = 3,
+                .tuner_type   = TUNER_XC2028,
+                .decoder      = EM28XX_TVP5150,
+                .input          = { {
+                        .type     = EM28XX_VMUX_TELEVISION,
+                        .vmux     = TVP5150_COMPOSITE0,
+                        .amux     = 0,
+                }, {
+                        .type     = EM28XX_VMUX_COMPOSITE1,
+                        .vmux     = TVP5150_COMPOSITE1,
+                        .amux     = 1,
+                }, {
+                        .type     = EM28XX_VMUX_SVIDEO,
+                        .vmux     = TVP5150_SVIDEO,
+                        .amux     = 1,
+                } },
+        },
+        [EM2881_BOARD_DNT_DA2_HYBRID] = {
+                .name         = "DNT DA2 Hybrid",
+                .valid        = EM28XX_BOARD_NOT_VALIDATED,
+                .vchannels    = 3,
+                .tuner_type   = TUNER_XC2028,
+                .decoder      = EM28XX_TVP5150,
+                .input          = { {
+                        .type     = EM28XX_VMUX_TELEVISION,
+                        .vmux     = TVP5150_COMPOSITE0,
+                        .amux     = 0,
+                }, {
+                        .type     = EM28XX_VMUX_COMPOSITE1,
+                        .vmux     = TVP5150_COMPOSITE1,
+                        .amux     = 1,
+                }, {
+                        .type     = EM28XX_VMUX_SVIDEO,
+                        .vmux     = TVP5150_SVIDEO,
+                        .amux     = 1,
+                } },
+        },
+        [EM2881_BOARD_PINNACLE_HYBRID_PRO] = {
+                .name         = "Pinnacle Hybrid Pro",
+                .valid        = EM28XX_BOARD_NOT_VALIDATED,
+                .vchannels    = 3,
+                .tuner_type   = TUNER_XC2028,
+                .decoder      = EM28XX_TVP5150,
+                .input          = { {
+                        .type     = EM28XX_VMUX_TELEVISION,
+                        .vmux     = TVP5150_COMPOSITE0,
+                        .amux     = 0,
+                }, {
+                        .type     = EM28XX_VMUX_COMPOSITE1,
+                        .vmux     = TVP5150_COMPOSITE1,
+                        .amux     = 1,
+                }, {
+                        .type     = EM28XX_VMUX_SVIDEO,
+                        .vmux     = TVP5150_SVIDEO,
+                        .amux     = 1,
+                } },
+        },
+        [EM2882_BOARD_PINNACLE_HYBRID_PRO] = {
+                .name         = "Pinnacle Hybrid Pro (2)",
+                .valid        = EM28XX_BOARD_NOT_VALIDATED,
+                .vchannels    = 3,
+                .tuner_type   = TUNER_XC2028,
+                .decoder      = EM28XX_TVP5150,
+                .input          = { {
+                        .type     = EM28XX_VMUX_TELEVISION,
+                        .vmux     = TVP5150_COMPOSITE0,
+                        .amux     = 0,
+                }, {
+                        .type     = EM28XX_VMUX_COMPOSITE1,
+                        .vmux     = TVP5150_COMPOSITE1,
+                        .amux     = 1,
+                }, {
+                        .type     = EM28XX_VMUX_SVIDEO,
+                        .vmux     = TVP5150_SVIDEO,
+                        .amux     = 1,
+                } },
+        },
+        [EM2882_BOARD_KWORLD_VS_DVBT] = {
+                .name         = "Kworld VS-DVB-T 323UR",
+                .valid        = EM28XX_BOARD_NOT_VALIDATED,
+                .vchannels    = 3,
+                .tuner_type   = TUNER_XC2028,
+                .decoder      = EM28XX_TVP5150,
+                .input          = { {
+                        .type     = EM28XX_VMUX_TELEVISION,
+                        .vmux     = TVP5150_COMPOSITE0,
+                        .amux     = 0,
+                }, {
+                        .type     = EM28XX_VMUX_COMPOSITE1,
+                        .vmux     = TVP5150_COMPOSITE1,
+                        .amux     = 1,
+                }, {
+                        .type     = EM28XX_VMUX_SVIDEO,
+                        .vmux     = TVP5150_SVIDEO,
+                        .amux     = 1,
+                } },
+        },
+        [EM2882_BOARD_TERRATEC_HYBRID_XS] = {
+                .name         = "Terratec Hybrid XS (em2882)",
+                .valid        = EM28XX_BOARD_NOT_VALIDATED,
+                .vchannels    = 3,
+                .tuner_type   = TUNER_XC2028,
+                .decoder      = EM28XX_TVP5150,
+                .input          = { {
+                        .type     = EM28XX_VMUX_TELEVISION,
+                        .vmux     = TVP5150_COMPOSITE0,
+                        .amux     = 0,
+                }, {
+                        .type     = EM28XX_VMUX_COMPOSITE1,
+                        .vmux     = TVP5150_COMPOSITE1,
+                        .amux     = 1,
+                }, {
+                        .type     = EM28XX_VMUX_SVIDEO,
+                        .vmux     = TVP5150_SVIDEO,
+                        .amux     = 1,
+                } },
+        },
+        [EM2883_BOARD_KWORLD_HYBRID_A316] = {
+                .name         = "Kworld PlusTV HD Hybrid 330",
+                .valid        = EM28XX_BOARD_NOT_VALIDATED,
+                .vchannels    = 3,
+                .is_em2800    = 0,
+                .tuner_type   = TUNER_XC2028,
+                .decoder      = EM28XX_TVP5150,
+                .input          = { {
+                        .type     = EM28XX_VMUX_TELEVISION,
+                        .vmux     = TVP5150_COMPOSITE0,
+                        .amux     = 0,
+                }, {
+                        .type     = EM28XX_VMUX_COMPOSITE1,
+                        .vmux     = TVP5150_COMPOSITE1,
+                        .amux     = 1,
+                }, {
+                        .type     = EM28XX_VMUX_SVIDEO,
+                        .vmux     = TVP5150_SVIDEO,
+                        .amux     = 1,
+                } },
+        },
+        [EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU] = {
+                .name         = "Compro VideoMate ForYou/Stereo",
+                .vchannels    = 2,
+                .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
+                .tda9887_conf = TDA9887_PRESENT,
+                .decoder      = EM28XX_TVP5150,
+                .input          = { {
+                        .type     = EM28XX_VMUX_TELEVISION,
+                        .vmux     = TVP5150_COMPOSITE0,
+                        .amux     = EM28XX_AMUX_LINE_IN,
+                }, {
+                        .type     = EM28XX_VMUX_SVIDEO,
+                        .vmux     = TVP5150_SVIDEO,
+                        .amux     = EM28XX_AMUX_LINE_IN,
+                } },
+        },
 };
 const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);
 
 /* table of devices that work with this driver */
 struct usb_device_id em28xx_id_table [] = {
         { USB_DEVICE(0xeb1a, 0x2750),
-                        .driver_info = EM2820_BOARD_UNKNOWN },
+                        .driver_info = EM2750_BOARD_UNKNOWN },
+        { USB_DEVICE(0xeb1a, 0x2751),
+                        .driver_info = EM2750_BOARD_UNKNOWN },
         { USB_DEVICE(0xeb1a, 0x2800),
                         .driver_info = EM2800_BOARD_UNKNOWN },
         { USB_DEVICE(0xeb1a, 0x2820),
@@ -462,36 +1132,78 @@ struct usb_device_id em28xx_id_table [] = {
                         .driver_info = EM2820_BOARD_UNKNOWN },
         { USB_DEVICE(0xeb1a, 0x2883),
                         .driver_info = EM2820_BOARD_UNKNOWN },
+        { USB_DEVICE(0xeb1a, 0xe300),
+                        .driver_info = EM2861_BOARD_KWORLD_PVRTV_300U },
+        { USB_DEVICE(0xeb1a, 0xe305),
+                        .driver_info = EM2880_BOARD_KWORLD_DVB_305U },
+        { USB_DEVICE(0xeb1a, 0xe310),
+                        .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD },
+        { USB_DEVICE(0xeb1a, 0xa316),
+                        .driver_info = EM2883_BOARD_KWORLD_HYBRID_A316 },
+        { USB_DEVICE(0xeb1a, 0xe320),
+                        .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD_II },
+        { USB_DEVICE(0xeb1a, 0xe323),
+                        .driver_info = EM2882_BOARD_KWORLD_VS_DVBT },
+        { USB_DEVICE(0xeb1a, 0xe350),
+                        .driver_info = EM2870_BOARD_KWORLD_350U },
+        { USB_DEVICE(0xeb1a, 0xe355),
+                        .driver_info = EM2870_BOARD_KWORLD_355U },
+        { USB_DEVICE(0xeb1a, 0x2801),
+                        .driver_info = EM2800_BOARD_GRABBEEX_USB2800 },
+        { USB_DEVICE(0xeb1a, 0xe357),
+                        .driver_info = EM2870_BOARD_KWORLD_355U },
         { USB_DEVICE(0x0ccd, 0x0036),
                         .driver_info = EM2820_BOARD_TERRATEC_CINERGY_250 },
-        { USB_DEVICE(0x2304, 0x0208),
-                        .driver_info = EM2820_BOARD_PINNACLE_USB_2 },
+        { USB_DEVICE(0x0ccd, 0x004c),
+                        .driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS_FR },
+        { USB_DEVICE(0x0ccd, 0x004f),
+                        .driver_info = EM2860_BOARD_TERRATEC_HYBRID_XS },
+        { USB_DEVICE(0x0ccd, 0x005e),
+                        .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS },
+        { USB_DEVICE(0x0ccd, 0x0042),
+                        .driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS },
+        { USB_DEVICE(0x0ccd, 0x0043),
+                        .driver_info = EM2870_BOARD_TERRATEC_XS },
+        { USB_DEVICE(0x0ccd, 0x0047),
+                        .driver_info = EM2880_BOARD_TERRATEC_PRODIGY_XS },
+        { USB_DEVICE(0x185b, 0x2870),
+                        .driver_info = EM2870_BOARD_COMPRO_VIDEOMATE },
+        { USB_DEVICE(0x185b, 0x2041),
+                        .driver_info = EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU },
         { USB_DEVICE(0x2040, 0x4200),
                         .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
         { USB_DEVICE(0x2040, 0x4201),
                         .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
-        { USB_DEVICE(0x2304, 0x0207),
-                        .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
-        { USB_DEVICE(0x2304, 0x021a),
-                        .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
-        { USB_DEVICE(0x2304, 0x0227),
-                        .driver_info = EM2880_BOARD_PINNACLE_PCTV_HD_PRO },
         { USB_DEVICE(0x2040, 0x6500),
                         .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 },
         { USB_DEVICE(0x2040, 0x6502),
                         .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2 },
         { USB_DEVICE(0x2040, 0x6513), /* HCW HVR-980 */
-                        .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950 },
+                        .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
         { USB_DEVICE(0x2040, 0x6517), /* HP  HVR-950 */
-                        .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950 },
+                        .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
         { USB_DEVICE(0x2040, 0x651b), /* RP  HVR-950 */
-                        .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950 },
+                        .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
         { USB_DEVICE(0x2040, 0x651f), /* HCW HVR-850 */
-                        .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950 },
-        { USB_DEVICE(0x0ccd, 0x0042),
-                        .driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS },
-        { USB_DEVICE(0x0ccd, 0x0047),
-                        .driver_info = EM2880_BOARD_TERRATEC_PRODIGY_XS },
+                        .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
+        { USB_DEVICE(0x0438, 0xb002),
+                        .driver_info = EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600 },
+        { USB_DEVICE(0x2001, 0xf112),
+                        .driver_info = EM2820_BOARD_DLINK_USB_TV },
+        { USB_DEVICE(0x2304, 0x0207),
+                        .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
+        { USB_DEVICE(0x2304, 0x0208),
+                        .driver_info = EM2820_BOARD_PINNACLE_USB_2 },
+        { USB_DEVICE(0x2304, 0x021a),
+                        .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
+        { USB_DEVICE(0x2304, 0x0226),
+                        .driver_info = EM2882_BOARD_PINNACLE_HYBRID_PRO },
+        { USB_DEVICE(0x2304, 0x0227),
+                        .driver_info = EM2880_BOARD_PINNACLE_PCTV_HD_PRO },
+        { USB_DEVICE(0x0413, 0x6023),
+                        .driver_info = EM2800_BOARD_LEADTEK_WINFAST_USBII },
+        { USB_DEVICE(0x093b, 0xa005),
+                        .driver_info = EM2861_BOARD_PLEXTOR_PX_TV100U },
         { },
 };
 MODULE_DEVICE_TABLE(usb, em28xx_id_table);
@@ -500,6 +1212,18 @@ MODULE_DEVICE_TABLE(usb, em28xx_id_table);
  *  Reset sequences for analog/digital modes
  */
 
+/* Reset for the most [analog] boards */
+static struct em28xx_reg_seq default_analog[] = {
+        {EM28XX_R08_GPIO,       0x6d,   ~EM_GPIO_4,     10},
+        {       -1,             -1,     -1,             -1},
+};
+
+/* Reset for the most [digital] boards */
+static struct em28xx_reg_seq default_digital[] = {
+        {EM28XX_R08_GPIO,       0x6e,   ~EM_GPIO_4,     10},
+        {       -1,             -1,     -1,             -1},
+};
+
 /* Board Hauppauge WinTV HVR 900 analog */
 static struct em28xx_reg_seq hauppauge_wintv_hvr_900_analog[] = {
         {EM28XX_R08_GPIO,       0x2d,   ~EM_GPIO_4,     10},
@@ -515,14 +1239,42 @@ static struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = {
         { -1,                   -1,     -1,             -1},
 };
 
-/* Board Hauppauge WinTV HVR 900 tuner_callback */
-static struct em28xx_reg_seq hauppauge_wintv_hvr_900_tuner_callback[] = {
+/* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
+static struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = {
+        {EM28XX_R08_GPIO,       0x69,   ~EM_GPIO_4,      10},
+        {       -1,             -1,     -1,              -1},
+};
+
+/* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
+static struct em28xx_reg_seq em2880_msi_digivox_ad_digital[] = {
+        {EM28XX_R08_GPIO,       0x6a,   ~EM_GPIO_4,     10},
+        {       -1,             -1,     -1,             -1},
+};
+
+/* Board  - EM2870 Kworld 355u
+   Analog - No input analog */
+static struct em28xx_reg_seq em2870_kworld_355u_digital[] = {
+        {EM2880_R04_GPO,        0x01,   0xff,           10},
+        {  -1,                  -1,     -1,             -1},
+};
+
+/* Callback for the most boards */
+static struct em28xx_reg_seq default_callback[] = {
         {EM28XX_R08_GPIO,       EM_GPIO_4,      EM_GPIO_4,      10},
         {EM28XX_R08_GPIO,       0,              EM_GPIO_4,      10},
         {EM28XX_R08_GPIO,       EM_GPIO_4,      EM_GPIO_4,      10},
         {  -1,                  -1,             -1,             -1},
 };
 
+/* Callback for EM2882 TERRATEC HYBRID XS */
+static struct em28xx_reg_seq em2882_terratec_hybrid_xs_digital[] = {
+        {EM28XX_R08_GPIO,       0x2e,   0xff,              6},
+        {EM28XX_R08_GPIO,       0x3e,   ~EM_GPIO_4,        6},
+        {EM2880_R04_GPO,        0x04,   0xff,             10},
+        {EM2880_R04_GPO,        0x0c,   0xff,             10},
+        {  -1,                  -1,     -1,               -1},
+};
+
 /*
  * EEPROM hash table for devices with generic USB IDs
  */
@@ -569,6 +1321,7 @@ static void em28xx_set_model(struct em28xx *dev)
         dev->max_range_640_480 = em28xx_boards[dev->model].max_range_640_480;
         dev->has_dvb = em28xx_boards[dev->model].has_dvb;
         dev->has_snapshot_button = em28xx_boards[dev->model].has_snapshot_button;
+        dev->valid = em28xx_boards[dev->model].valid;
 }
 
 /* Since em28xx_pre_card_setup() requires a proper dev->model,
@@ -604,19 +1357,171 @@ void em28xx_pre_card_setup(struct em28xx *dev)
         case EM2880_BOARD_TERRATEC_PRODIGY_XS:
         case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
         case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
-        case EM2880_BOARD_TERRATEC_HYBRID_XS:
-        case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950:
+        case EM2860_BOARD_TERRATEC_HYBRID_XS:
+        case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
         case EM2880_BOARD_PINNACLE_PCTV_HD_PRO:
+        case EM2882_BOARD_PINNACLE_HYBRID_PRO:
+        case EM2883_BOARD_KWORLD_HYBRID_A316:
+        case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600:
+                em28xx_write_regs(dev, EM28XX_R0F_XCLK,    "\x27", 1);
+                em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
+                msleep(50);
+
+                /* Sets GPO/GPIO sequences for this device */
+                dev->analog_gpio      = hauppauge_wintv_hvr_900_analog;
+                dev->digital_gpio     = hauppauge_wintv_hvr_900_digital;
+                dev->tun_analog_gpio  = default_callback;
+                dev->tun_digital_gpio = default_callback;
+                break;
+
+        case EM2882_BOARD_TERRATEC_HYBRID_XS:
                 em28xx_write_regs(dev, EM28XX_R0F_XCLK,    "\x27", 1);
                 em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
                 msleep(50);
 
+                /* should be added ir_codes here */
+
                 /* Sets GPO/GPIO sequences for this device */
                 dev->analog_gpio      = hauppauge_wintv_hvr_900_analog;
                 dev->digital_gpio     = hauppauge_wintv_hvr_900_digital;
-                dev->tun_analog_gpio  = hauppauge_wintv_hvr_900_tuner_callback;
-                dev->tun_digital_gpio = hauppauge_wintv_hvr_900_tuner_callback;
+                dev->tun_analog_gpio  = default_callback;
+                dev->tun_digital_gpio = em2882_terratec_hybrid_xs_digital;
+                break;
+
+        case EM2880_BOARD_TERRATEC_HYBRID_XS_FR:
+        case EM2880_BOARD_TERRATEC_HYBRID_XS:
+        case EM2870_BOARD_TERRATEC_XS:
+        case EM2881_BOARD_PINNACLE_HYBRID_PRO:
+        case EM2880_BOARD_KWORLD_DVB_310U:
+        case EM2870_BOARD_KWORLD_350U:
+        case EM2881_BOARD_DNT_DA2_HYBRID:
+                em28xx_write_regs(dev, EM28XX_R0F_XCLK,    "\x27", 1);
+                em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
+                msleep(50);
+
+                /* NOTE: EM2881_DNT_DA2_HYBRID spend 140 msleep for digital
+                         and analog commands. If this commands doesn't work,
+                         add this timer. */
 
+                /* Sets GPO/GPIO sequences for this device */
+                dev->analog_gpio      = default_analog;
+                dev->digital_gpio     = default_digital;
+                dev->tun_analog_gpio  = default_callback;
+                dev->tun_digital_gpio = default_callback;
+                break;
+
+        case EM2880_BOARD_MSI_DIGIVOX_AD:
+        case EM2880_BOARD_MSI_DIGIVOX_AD_II:
+                em28xx_write_regs(dev, EM28XX_R0F_XCLK,    "\x27", 1);
+                em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
+                msleep(50);
+
+                /* Sets GPO/GPIO sequences for this device */
+                dev->analog_gpio      = em2880_msi_digivox_ad_analog;
+                dev->digital_gpio     = em2880_msi_digivox_ad_digital;
+                dev->tun_analog_gpio  = default_callback;
+                dev->tun_digital_gpio = default_callback;
+                break;
+
+        case EM2750_BOARD_UNKNOWN:
+        case EM2750_BOARD_DLCW_130:
+                em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x0a", 1);
+                break;
+
+        case EM2861_BOARD_PLEXTOR_PX_TV100U:
+                em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
+                em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
+                /* FIXME guess */
+                /* Turn on analog audio output */
+                em28xx_write_regs_req(dev, 0x00, 0x08, "\xfd", 1);
+                break;
+
+        case EM2861_BOARD_KWORLD_PVRTV_300U:
+        case EM2880_BOARD_KWORLD_DVB_305U:
+                em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
+                em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x4c", 1);
+                msleep(10);
+                em28xx_write_regs(dev, 0x08, "\x6d", 1);
+                msleep(10);
+                em28xx_write_regs(dev, 0x08, "\x7d", 1);
+                msleep(10);
+                break;
+
+        case EM2870_BOARD_KWORLD_355U:
+                em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
+                em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
+                msleep(50);
+
+                /* Sets GPO/GPIO sequences for this device */
+                dev->digital_gpio     = em2870_kworld_355u_digital;
+                break;
+
+        case EM2870_BOARD_COMPRO_VIDEOMATE:
+                em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
+                em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
+                /* TODO: someone can do some cleanup here...
+                         not everything's needed */
+                em28xx_write_regs(dev, 0x04, "\x00", 1);
+                msleep(10);
+                em28xx_write_regs(dev, 0x04, "\x01", 1);
+                msleep(10);
+                em28xx_write_regs(dev, 0x08, "\xfd", 1);
+                mdelay(70);
+                em28xx_write_regs(dev, 0x08, "\xfc", 1);
+                mdelay(70);
+                em28xx_write_regs(dev, 0x08, "\xdc", 1);
+                mdelay(70);
+                em28xx_write_regs(dev, 0x08, "\xfc", 1);
+                mdelay(70);
+                break;
+
+        case EM2870_BOARD_TERRATEC_XS_MT2060:
+                em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
+                em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
+                /* this device needs some gpio writes to get the DVB-T
+                   demod work */
+                em28xx_write_regs(dev, 0x08, "\xfe", 1);
+                mdelay(70);
+                em28xx_write_regs(dev, 0x08, "\xde", 1);
+                mdelay(70);
+                dev->em28xx_write_regs(dev, 0x08, "\xfe", 1);
+                mdelay(70);
+                break;
+
+        case EM2870_BOARD_PINNACLE_PCTV_DVB:
+                em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
+                /* this device needs some gpio writes to get the
+                   DVB-T demod work */
+                em28xx_write_regs(dev, 0x08, "\xfe", 1);
+                mdelay(70);
+                em28xx_write_regs(dev, 0x08, "\xde", 1);
+                mdelay(70);
+                em28xx_write_regs(dev, 0x08, "\xfe", 1);
+                mdelay(70);
+                /* switch em2880 rc protocol */
+                em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x22", 1);
+                /* should be added ir_codes here */
+                break;
+
+        case EM2820_BOARD_GADMEI_UTV310:
+                em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
+                em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
+                /* Turn on analog audio output */
+                em28xx_write_regs_req(dev, 0x00, 0x08, "\xfd", 1);
+                break;
+
+        case EM2860_BOARD_GADMEI_UTV330:
+                /* Turn on IR */
+                em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x07", 1);
+                em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
+                /* should be added ir_codes here */
+                break;
+
+        case EM2820_BOARD_MSI_VOX_USB_2:
+                em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
+                em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
+                /* enables audio for that device */
+                em28xx_write_regs_req(dev, 0x00, 0x08, "\xfd", 1);
                 break;
         }
 
@@ -639,12 +1544,16 @@ static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl)
         case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
                 ctl->demod = XC3028_FE_ZARLINK456;
                 break;
+        case EM2880_BOARD_TERRATEC_HYBRID_XS:
+                ctl->demod = XC3028_FE_ZARLINK456;
+                break;
         case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
                 /* djh - Not sure which demod we need here */
                 ctl->demod = XC3028_FE_DEFAULT;
                 break;
-        case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950:
+        case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
         case EM2880_BOARD_PINNACLE_PCTV_HD_PRO:
+        case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600:
                 /* FIXME: Better to specify the needed IF */
                 ctl->demod = XC3028_FE_DEFAULT;
                 break;
@@ -809,6 +1718,8 @@ void em28xx_set_ir(struct em28xx *dev, struct IR_i2c *ir)
                 break;
         case (EM2800_BOARD_KWORLD_USB2800):
                 break;
+        case (EM2800_BOARD_GRABBEEX_USB2800):
+                break;
         }
 }
 
@@ -823,7 +1734,7 @@ void em28xx_card_setup(struct em28xx *dev)
         case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2:
         case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
         case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
-        case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950:
+        case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
         {
                 struct tveeprom tv;
 #ifdef CONFIG_MODULES
@@ -836,7 +1747,7 @@ void em28xx_card_setup(struct em28xx *dev)
 
                 dev->tuner_type = tv.tuner_type;
 
-                if (tv.audio_processor == AUDIO_CHIP_MSP34XX) {
+                if (tv.audio_processor == V4L2_IDENT_MSPX4XX) {
                         dev->i2s_speed = 2048000;
                         dev->has_msp34xx = 1;
                 }
@@ -854,11 +1765,21 @@ void em28xx_card_setup(struct em28xx *dev)
         case EM2800_BOARD_UNKNOWN:
                 if (!em28xx_hint_board(dev))
                         em28xx_set_model(dev);
+                break;
         }
 
         if (dev->has_snapshot_button)
                 em28xx_register_snapshot_button(dev);
 
+        if (dev->valid == EM28XX_BOARD_NOT_VALIDATED) {
+                em28xx_errdev("\n\n");
+                em28xx_errdev("The support for this board weren't "
+                              "valid yet.\n");
+                em28xx_errdev("Please send a report of having this working\n");
+                em28xx_errdev("not to V4L mailing list (and/or to other "
+                                "addresses)\n\n");
+        }
+
         /* Allow override tuner type by a module parameter */
         if (tuner >= 0)
                 dev->tuner_type = tuner;
diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c
index cc61cfb23a4a..4b992bc0083c 100644
--- a/drivers/media/video/em28xx/em28xx-dvb.c
+++ b/drivers/media/video/em28xx/em28xx-dvb.c
@@ -6,6 +6,7 @@
  (c) 2008 Devin Heitmueller <devin.heitmueller@gmail.com>
         - Fixes for the driver to properly work with HVR-950
         - Fixes for the driver to properly work with Pinnacle PCTV HD Pro Stick
+        - Fixes for the driver to properly work with AMD ATI TV Wonder HD 600
 
  (c) 2008 Aidan Thornton <makosoft@googlemail.com>
 
@@ -409,8 +410,9 @@ static int dvb_init(struct em28xx *dev)
         em28xx_set_mode(dev, EM28XX_DIGITAL_MODE);
         /* init frontend */
         switch (dev->model) {
-        case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950:
+        case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
         case EM2880_BOARD_PINNACLE_PCTV_HD_PRO:
+        case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600:
                 dvb->frontend = dvb_attach(lgdt330x_attach,
                                            &em2880_lgdt3303_dev,
                                            &dev->i2c_adap);
@@ -441,6 +443,15 @@ static int dvb_init(struct em28xx *dev)
                 }
                 break;
 #endif
+        case EM2880_BOARD_TERRATEC_HYBRID_XS:
+                dvb->frontend = dvb_attach(zl10353_attach,
+                                                &em28xx_zl10353_with_xc3028,
+                                                &dev->i2c_adap);
+                if (attach_xc3028(0x61, dev) < 0) {
+                         result = -EINVAL;
+                        goto out_free;
+                }
+                break;
         default:
                 printk(KERN_ERR "%s/2: The frontend of your DVB/ATSC card"
                                 " isn't supported yet\n",
diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index 2d9f14d2a00b..49ab0629702e 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -38,6 +38,7 @@
 
 #include "em28xx.h"
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <media/msp3400.h>
 #include <media/tuner.h>
 
@@ -1763,20 +1764,7 @@ static const struct file_operations em28xx_v4l_fops = {
         .compat_ioctl  = v4l_compat_ioctl32,
 };
 
-static const struct file_operations radio_fops = {
-        .owner         = THIS_MODULE,
-        .open          = em28xx_v4l2_open,
-        .release       = em28xx_v4l2_close,
-        .ioctl         = video_ioctl2,
-        .compat_ioctl  = v4l_compat_ioctl32,
-        .llseek        = no_llseek,
-};
-
-static const struct video_device em28xx_video_template = {
-        .fops                       = &em28xx_v4l_fops,
-        .release                    = video_device_release,
-
-        .minor                      = -1,
+static const struct v4l2_ioctl_ops video_ioctl_ops = {
         .vidioc_querycap            = vidioc_querycap,
         .vidioc_enum_fmt_vid_cap    = vidioc_enum_fmt_vid_cap,
         .vidioc_g_fmt_vid_cap       = vidioc_g_fmt_vid_cap,
@@ -1814,16 +1802,29 @@ static const struct video_device em28xx_video_template = {
 #ifdef CONFIG_VIDEO_V4L1_COMPAT
         .vidiocgmbuf                = vidiocgmbuf,
 #endif
+};
+
+static const struct video_device em28xx_video_template = {
+        .fops                       = &em28xx_v4l_fops,
+        .release                    = video_device_release,
+        .ioctl_ops                  = &video_ioctl_ops,
+
+        .minor                      = -1,
 
         .tvnorms                    = V4L2_STD_ALL,
         .current_norm               = V4L2_STD_PAL,
 };
 
-static struct video_device em28xx_radio_template = {
-        .name                 = "em28xx-radio",
-        .type                 = VID_TYPE_TUNER,
-        .fops                 = &radio_fops,
-        .minor                = -1,
+static const struct file_operations radio_fops = {
+        .owner         = THIS_MODULE,
+        .open          = em28xx_v4l2_open,
+        .release       = em28xx_v4l2_close,
+        .ioctl         = video_ioctl2,
+        .compat_ioctl  = v4l_compat_ioctl32,
+        .llseek        = no_llseek,
+};
+
+static const struct v4l2_ioctl_ops radio_ioctl_ops = {
         .vidioc_querycap      = radio_querycap,
         .vidioc_g_tuner       = radio_g_tuner,
         .vidioc_enum_input    = radio_enum_input,
@@ -1842,6 +1843,13 @@ static struct video_device em28xx_radio_template = {
 #endif
 };
 
+static struct video_device em28xx_radio_template = {
+        .name                 = "em28xx-radio",
+        .fops                 = &radio_fops,
+        .ioctl_ops            = &radio_ioctl_ops,
+        .minor                = -1,
+};
+
 /******************************** usb interface ******************************/
 
 
@@ -1882,7 +1890,6 @@ EXPORT_SYMBOL(em28xx_unregister_extension);
 
 static struct video_device *em28xx_vdev_init(struct em28xx *dev,
                                              const struct video_device *template,
-                                             const int type,
                                              const char *type_name)
 {
         struct video_device *vfd;
@@ -1892,9 +1899,8 @@ static struct video_device *em28xx_vdev_init(struct em28xx *dev,
                 return NULL;
         *vfd = *template;
         vfd->minor   = -1;
-        vfd->dev = &dev->udev->dev;
+        vfd->parent = &dev->udev->dev;
         vfd->release = video_device_release;
-        vfd->type = type;
         vfd->debug = video_debug;
 
         snprintf(vfd->name, sizeof(vfd->name), "%s %s",
@@ -1972,14 +1978,11 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
         list_add_tail(&dev->devlist, &em28xx_devlist);
 
         /* allocate and fill video video_device struct */
-        dev->vdev = em28xx_vdev_init(dev, &em28xx_video_template,
-                                          VID_TYPE_CAPTURE, "video");
+        dev->vdev = em28xx_vdev_init(dev, &em28xx_video_template, "video");
         if (NULL == dev->vdev) {
                 em28xx_errdev("cannot allocate video_device.\n");
                 goto fail_unreg;
         }
-        if (dev->tuner_type != TUNER_ABSENT)
-                dev->vdev->type |= VID_TYPE_TUNER;
 
         /* register v4l2 video video_device */
         retval = video_register_device(dev->vdev, VFL_TYPE_GRABBER,
@@ -1991,8 +1994,7 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
         }
 
         /* Allocate and fill vbi video_device struct */
-        dev->vbi_dev = em28xx_vdev_init(dev, &em28xx_video_template,
-                                          VFL_TYPE_VBI, "vbi");
+        dev->vbi_dev = em28xx_vdev_init(dev, &em28xx_video_template, "vbi");
         /* register v4l2 vbi video_device */
         if (video_register_device(dev->vbi_dev, VFL_TYPE_VBI,
                                         vbi_nr[dev->devno]) < 0) {
@@ -2002,8 +2004,7 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
         }
 
         if (em28xx_boards[dev->model].radio.type == EM28XX_RADIO) {
-                dev->radio_dev = em28xx_vdev_init(dev, &em28xx_radio_template,
-                                        VFL_TYPE_RADIO, "radio");
+                dev->radio_dev = em28xx_vdev_init(dev, &em28xx_radio_template, "radio");
                 if (NULL == dev->radio_dev) {
                         em28xx_errdev("cannot allocate video_device.\n");
                         goto fail_unreg;
diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h
index 89842c5d64a1..9a3310748685 100644
--- a/drivers/media/video/em28xx/em28xx.h
+++ b/drivers/media/video/em28xx/em28xx.h
@@ -54,15 +54,58 @@
 #define EM2880_BOARD_TERRATEC_PRODIGY_XS        13
 #define EM2820_BOARD_PROLINK_PLAYTV_USB2        14
 #define EM2800_BOARD_VGEAR_POCKETTV             15
-#define EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950    16
+#define EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950    16
 #define EM2880_BOARD_PINNACLE_PCTV_HD_PRO       17
 #define EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2 18
 #define EM2860_BOARD_POINTNIX_INTRAORAL_CAMERA  19
+#define EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600   20
+#define EM2800_BOARD_GRABBEEX_USB2800           21
+#define EM2750_BOARD_UNKNOWN                      22
+#define EM2750_BOARD_DLCW_130                     23
+#define EM2820_BOARD_DLINK_USB_TV                 24
+#define EM2820_BOARD_GADMEI_UTV310                25
+#define EM2820_BOARD_HERCULES_SMART_TV_USB2       26
+#define EM2820_BOARD_PINNACLE_USB_2_FM1216ME      27
+#define EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE 28
+#define EM2820_BOARD_PINNACLE_DVC_100             29
+#define EM2820_BOARD_VIDEOLOGY_20K14XUSB          30
+#define EM2821_BOARD_USBGEAR_VD204                31
+#define EM2821_BOARD_SUPERCOMP_USB_2              32
+#define EM2821_BOARD_PROLINK_PLAYTV_USB2          33
+#define EM2860_BOARD_TERRATEC_HYBRID_XS           34
+#define EM2860_BOARD_TYPHOON_DVD_MAKER            35
+#define EM2860_BOARD_NETGMBH_CAM                  36
+#define EM2860_BOARD_GADMEI_UTV330                37
+#define EM2861_BOARD_YAKUMO_MOVIE_MIXER           38
+#define EM2861_BOARD_KWORLD_PVRTV_300U            39
+#define EM2861_BOARD_PLEXTOR_PX_TV100U            40
+#define EM2870_BOARD_KWORLD_350U                  41
+#define EM2870_BOARD_KWORLD_355U                  42
+#define EM2870_BOARD_TERRATEC_XS                  43
+#define EM2870_BOARD_TERRATEC_XS_MT2060           44
+#define EM2870_BOARD_PINNACLE_PCTV_DVB            45
+#define EM2870_BOARD_COMPRO_VIDEOMATE             46
+#define EM2880_BOARD_KWORLD_DVB_305U              47
+#define EM2880_BOARD_KWORLD_DVB_310U              48
+#define EM2880_BOARD_MSI_DIGIVOX_AD               49
+#define EM2880_BOARD_MSI_DIGIVOX_AD_II            50
+#define EM2880_BOARD_TERRATEC_HYBRID_XS_FR        51
+#define EM2881_BOARD_DNT_DA2_HYBRID               52
+#define EM2881_BOARD_PINNACLE_HYBRID_PRO          53
+#define EM2882_BOARD_KWORLD_VS_DVBT               54
+#define EM2882_BOARD_TERRATEC_HYBRID_XS           55
+#define EM2882_BOARD_PINNACLE_HYBRID_PRO          56
+#define EM2883_BOARD_KWORLD_HYBRID_A316           57
+#define EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU      58
 
 /* Limits minimum and default number of buffers */
 #define EM28XX_MIN_BUF 4
 #define EM28XX_DEF_BUF 8
 
+/* Params for validated field */
+#define EM28XX_BOARD_NOT_VALIDATED 1
+#define EM28XX_BOARD_VALIDATED     0
+
 /* maximum number of em28xx boards */
 #define EM28XX_MAXBOARDS 4 /*FIXME: should be bigger */
 
@@ -251,6 +294,7 @@ struct em28xx_board {
         unsigned int max_range_640_480:1;
         unsigned int has_dvb:1;
         unsigned int has_snapshot_button:1;
+        unsigned int valid:1;
 
         enum em28xx_decoder decoder;
 
@@ -331,6 +375,7 @@ struct em28xx {
         unsigned int max_range_640_480:1;
         unsigned int has_dvb:1;
         unsigned int has_snapshot_button:1;
+        unsigned int valid:1;           /* report for validated boards */
 
         /* Some older em28xx chips needs a waiting time after writing */
         unsigned int wait_after_write;
@@ -360,7 +405,7 @@ struct em28xx {
         v4l2_std_id norm;       /* selected tv norm */
         int ctl_freq;           /* selected frequency */
         unsigned int ctl_input; /* selected input */
-        unsigned int ctl_ainput;        /* slected audio input */
+        unsigned int ctl_ainput;/* selected audio input */
         int mute;
         int volume;
         /* frame properties */
diff --git a/drivers/media/video/et61x251/et61x251_core.c b/drivers/media/video/et61x251/et61x251_core.c
index 15d037ae25c5..2d170d101c21 100644
--- a/drivers/media/video/et61x251/et61x251_core.c
+++ b/drivers/media/video/et61x251/et61x251_core.c
@@ -34,6 +34,7 @@
 #include <linux/mm.h>
 #include <linux/vmalloc.h>
 #include <linux/page-flags.h>
+#include <media/v4l2-ioctl.h>
 #include <asm/byteorder.h>
 #include <asm/page.h>
 #include <asm/uaccess.h>
@@ -985,7 +986,7 @@ static DEVICE_ATTR(i2c_val, S_IRUGO | S_IWUSR,
 
 static int et61x251_create_sysfs(struct et61x251_device* cam)
 {
-        struct device *classdev = &(cam->v4ldev->class_dev);
+        struct device *classdev = &(cam->v4ldev->dev);
         int err = 0;
 
         if ((err = device_create_file(classdev, &dev_attr_reg)))
@@ -2584,8 +2585,6 @@ et61x251_usb_probe(struct usb_interface* intf, const struct usb_device_id* id)
         }
 
         strcpy(cam->v4ldev->name, "ET61X[12]51 PC Camera");
-        cam->v4ldev->owner = THIS_MODULE;
-        cam->v4ldev->type = VID_TYPE_CAPTURE | VID_TYPE_SCALES;
         cam->v4ldev->fops = &et61x251_fops;
         cam->v4ldev->minor = video_nr[dev_nr];
         cam->v4ldev->release = video_device_release;
diff --git a/drivers/media/video/gspca/conex.c b/drivers/media/video/gspca/conex.c
index 013d593b0c67..44b0bffeb20e 100644
--- a/drivers/media/video/gspca/conex.c
+++ b/drivers/media/video/gspca/conex.c
@@ -25,9 +25,6 @@
 #define CONEX_CAM 1             /* special JPEG header */
 #include "jpeg.h"
 
-#define DRIVER_VERSION_NUMBER   KERNEL_VERSION(2, 1, 7)
-static const char version[] = "2.1.7";
-
 MODULE_AUTHOR("Michel Xhaard <mxhaard@users.sourceforge.net>");
 MODULE_DESCRIPTION("GSPCA USB Conexant Camera Driver");
 MODULE_LICENSE("GPL");
@@ -818,7 +815,6 @@ static int sd_config(struct gspca_dev *gspca_dev,
         struct cam *cam;
 
         cam = &gspca_dev->cam;
-        cam->dev_name = (char *) id->driver_info;
         cam->epaddr = 0x01;
         cam->cam_mode = vga_mode;
         cam->nmodes = sizeof vga_mode / sizeof vga_mode[0];
@@ -1011,9 +1007,8 @@ static struct sd_desc sd_desc = {
 };
 
 /* -- module initialisation -- */
-#define DVNM(name) .driver_info = (kernel_ulong_t) name
 static __devinitdata struct usb_device_id device_table[] = {
-        {USB_DEVICE(0x0572, 0x0041), DVNM("Creative Notebook cx11646")},
+        {USB_DEVICE(0x0572, 0x0041)},
         {}
 };
 MODULE_DEVICE_TABLE(usb, device_table);
@@ -1038,7 +1033,7 @@ static int __init sd_mod_init(void)
 {
         if (usb_register(&sd_driver) < 0)
                 return -1;
-        PDEBUG(D_PROBE, "v%s registered", version);
+        PDEBUG(D_PROBE, "registered");
         return 0;
 }
 static void __exit sd_mod_exit(void)
diff --git a/drivers/media/video/gspca/etoms.c b/drivers/media/video/gspca/etoms.c
index 8ab4ea7201a9..c8c2f02fcf00 100644
--- a/drivers/media/video/gspca/etoms.c
+++ b/drivers/media/video/gspca/etoms.c
@@ -22,9 +22,6 @@
 
 #include "gspca.h"
 
-#define DRIVER_VERSION_NUMBER   KERNEL_VERSION(2, 1, 7)
-static const char version[] = "2.1.7";
-
 MODULE_AUTHOR("Michel Xhaard <mxhaard@users.sourceforge.net>");
 MODULE_DESCRIPTION("Etoms USB Camera Driver");
 MODULE_LICENSE("GPL");
@@ -602,26 +599,10 @@ static int sd_config(struct gspca_dev *gspca_dev,
 {
         struct sd *sd = (struct sd *) gspca_dev;
         struct cam *cam;
-        __u16 vendor;
-        __u16 product;
-
-        vendor = id->idVendor;
-        product = id->idProduct;
-/*      switch (vendor) { */
-/*      case 0x102c:            * Etoms */
-                switch (product) {
-                case 0x6151:
-                        sd->sensor = SENSOR_PAS106;     /* Etoms61x151 */
-                        break;
-                case 0x6251:
-                        sd->sensor = SENSOR_TAS5130CXX; /* Etoms61x251 */
-                        break;
-/*              } */
-/*              break; */
-        }
+
         cam = &gspca_dev->cam;
-        cam->dev_name = (char *) id->driver_info;
         cam->epaddr = 1;
+        sd->sensor = id->driver_info;
         if (sd->sensor == SENSOR_PAS106) {
                 cam->cam_mode = sif_mode;
                 cam->nmodes = sizeof sif_mode / sizeof sif_mode[0];
@@ -911,12 +892,11 @@ static struct sd_desc sd_desc = {
 };
 
 /* -- module initialisation -- */
-#define DVNM(name) .driver_info = (kernel_ulong_t) name
 static __devinitdata struct usb_device_id device_table[] = {
 #ifndef CONFIG_USB_ET61X251
-        {USB_DEVICE(0x102c, 0x6151), DVNM("Qcam Sangha CIF")},
+        {USB_DEVICE(0x102c, 0x6151), .driver_info = SENSOR_PAS106},
 #endif
-        {USB_DEVICE(0x102c, 0x6251), DVNM("Qcam xxxxxx VGA")},
+        {USB_DEVICE(0x102c, 0x6251), .driver_info = SENSOR_TAS5130CXX},
         {}
 };
 
@@ -942,7 +922,7 @@ static int __init sd_mod_init(void)
 {
         if (usb_register(&sd_driver) < 0)
                 return -1;
-        PDEBUG(D_PROBE, "v%s registered", version);
+        PDEBUG(D_PROBE, "registered");
         return 0;
 }
 
diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index 16e367cec760..3a051c925ff6 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -32,6 +32,7 @@
 #include <asm/page.h>
 #include <linux/uaccess.h>
 #include <linux/jiffies.h>
+#include <media/v4l2-ioctl.h>
 
 #include "gspca.h"
 
@@ -42,8 +43,7 @@ MODULE_AUTHOR("Jean-Francois Moine <http://moinejf.free.fr>");
 MODULE_DESCRIPTION("GSPCA USB Camera Driver");
 MODULE_LICENSE("GPL");
 
-#define DRIVER_VERSION_NUMBER   KERNEL_VERSION(2, 1, 7)
-static const char version[] = "2.1.7";
+#define DRIVER_VERSION_NUMBER   KERNEL_VERSION(2, 2, 0)
 
 static int video_nr = -1;
 
@@ -209,6 +209,8 @@ struct gspca_frame *gspca_frame_add(struct gspca_dev *gspca_dev,
                                    &frame->v4l2_buf.timestamp);
                 frame->v4l2_buf.sequence = ++gspca_dev->sequence;
         } else if (gspca_dev->last_packet_type == DISCARD_PACKET) {
+                if (packet_type == LAST_PACKET)
+                        gspca_dev->last_packet_type = packet_type;
                 return frame;
         }
 
@@ -399,7 +401,7 @@ static struct usb_host_endpoint *alt_isoc(struct usb_host_interface *alt,
  * This routine may be called many times when the bandwidth is too small
  * (the bandwidth is checked on urb submit).
  */
-struct usb_host_endpoint *get_isoc_ep(struct gspca_dev *gspca_dev)
+static struct usb_host_endpoint *get_isoc_ep(struct gspca_dev *gspca_dev)
 {
         struct usb_interface *intf;
         struct usb_host_endpoint *ep;
@@ -832,7 +834,16 @@ static int vidioc_querycap(struct file *file, void  *priv,
 
         memset(cap, 0, sizeof *cap);
         strncpy(cap->driver, gspca_dev->sd_desc->name, sizeof cap->driver);
-        strncpy(cap->card, gspca_dev->cam.dev_name, sizeof cap->card);
+/*      strncpy(cap->card, gspca_dev->cam.dev_name, sizeof cap->card); */
+        if (gspca_dev->dev->product != NULL) {
+                strncpy(cap->card, gspca_dev->dev->product,
+                        sizeof cap->card);
+        } else {
+                snprintf(cap->card, sizeof cap->card,
+                        "USB Camera (%04x:%04x)",
+                        le16_to_cpu(gspca_dev->dev->descriptor.idVendor),
+                        le16_to_cpu(gspca_dev->dev->descriptor.idProduct));
+        }
         strncpy(cap->bus_info, gspca_dev->dev->bus->bus_name,
                 sizeof cap->bus_info);
         cap->version = DRIVER_VERSION_NUMBER;
@@ -1649,12 +1660,7 @@ static struct file_operations dev_fops = {
         .poll   = dev_poll,
 };
 
-static struct video_device gspca_template = {
-        .name = "gspca main driver",
-        .type = VID_TYPE_CAPTURE,
-        .fops = &dev_fops,
-        .release = dev_release,         /* mandatory */
-        .minor = -1,
+static const struct v4l2_ioctl_ops dev_ioctl_ops = {
         .vidioc_querycap        = vidioc_querycap,
         .vidioc_dqbuf           = vidioc_dqbuf,
         .vidioc_qbuf            = vidioc_qbuf,
@@ -1683,6 +1689,14 @@ static struct video_device gspca_template = {
 #endif
 };
 
+static struct video_device gspca_template = {
+        .name = "gspca main driver",
+        .fops = &dev_fops,
+        .ioctl_ops = &dev_ioctl_ops,
+        .release = dev_release,         /* mandatory */
+        .minor = -1,
+};
+
 /*
  * probe and create a new gspca device
  *
@@ -1740,10 +1754,11 @@ int gspca_dev_probe(struct usb_interface *intf,
 
         /* init video stuff */
         memcpy(&gspca_dev->vdev, &gspca_template, sizeof gspca_template);
-        gspca_dev->vdev.dev = &dev->dev;
+        gspca_dev->vdev.parent = &dev->dev;
         memcpy(&gspca_dev->fops, &dev_fops, sizeof gspca_dev->fops);
         gspca_dev->vdev.fops = &gspca_dev->fops;
         gspca_dev->fops.owner = module;         /* module protection */
+        gspca_dev->present = 1;
         ret = video_register_device(&gspca_dev->vdev,
                                   VFL_TYPE_GRABBER,
                                   video_nr);
@@ -1752,7 +1767,6 @@ int gspca_dev_probe(struct usb_interface *intf,
                 goto out;
         }
 
-        gspca_dev->present = 1;
         usb_set_intfdata(intf, gspca_dev);
         PDEBUG(D_PROBE, "probe ok");
         return 0;
@@ -1885,7 +1899,10 @@ EXPORT_SYMBOL(gspca_auto_gain_n_exposure);
 /* -- module insert / remove -- */
 static int __init gspca_init(void)
 {
-        info("main v%s registered", version);
+        info("main v%d.%d.%d registered",
+                (DRIVER_VERSION_NUMBER >> 16) & 0xff,
+                (DRIVER_VERSION_NUMBER >> 8) & 0xff,
+                DRIVER_VERSION_NUMBER & 0xff);
         return 0;
 }
 static void __exit gspca_exit(void)
diff --git a/drivers/media/video/gspca/mars.c b/drivers/media/video/gspca/mars.c
index 88c2b02f380a..21c4ee56a10a 100644
--- a/drivers/media/video/gspca/mars.c
+++ b/drivers/media/video/gspca/mars.c
@@ -24,9 +24,6 @@
 #include "gspca.h"
 #include "jpeg.h"
 
-#define DRIVER_VERSION_NUMBER   KERNEL_VERSION(2, 1, 7)
-static const char version[] = "2.1.7";
-
 MODULE_AUTHOR("Michel Xhaard <mxhaard@users.sourceforge.net>");
 MODULE_DESCRIPTION("GSPCA/Mars USB Camera Driver");
 MODULE_LICENSE("GPL");
@@ -140,7 +137,6 @@ static int sd_config(struct gspca_dev *gspca_dev,
         struct cam *cam;
 
         cam = &gspca_dev->cam;
-        cam->dev_name = (char *) id->driver_info;
         cam->epaddr = 0x01;
         cam->cam_mode = vga_mode;
         cam->nmodes = sizeof vga_mode / sizeof vga_mode[0];
@@ -424,9 +420,8 @@ static const struct sd_desc sd_desc = {
 };
 
 /* -- module initialisation -- */
-#define DVNM(name) .driver_info = (kernel_ulong_t) name
 static const __devinitdata struct usb_device_id device_table[] = {
-        {USB_DEVICE(0x093a, 0x050f), DVNM("Mars-Semi Pc-Camera")},
+        {USB_DEVICE(0x093a, 0x050f)},
         {}
 };
 MODULE_DEVICE_TABLE(usb, device_table);
@@ -451,7 +446,7 @@ static int __init sd_mod_init(void)
 {
         if (usb_register(&sd_driver) < 0)
                 return -1;
-        PDEBUG(D_PROBE, "v%s registered", version);
+        PDEBUG(D_PROBE, "registered");
         return 0;
 }
 static void __exit sd_mod_exit(void)
diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c
index 08d99c3b78e2..83139efc4629 100644
--- a/drivers/media/video/gspca/ov519.c
+++ b/drivers/media/video/gspca/ov519.c
@@ -24,9 +24,6 @@
 
 #include "gspca.h"
 
-#define DRIVER_VERSION_NUMBER   KERNEL_VERSION(2, 1, 7)
-static const char version[] = "2.1.7";
-
 MODULE_AUTHOR("Jean-Francois Moine <http://moinejf.free.fr>");
 MODULE_DESCRIPTION("OV519 USB Camera Driver");
 MODULE_LICENSE("GPL");
@@ -1375,7 +1372,6 @@ static int sd_config(struct gspca_dev *gspca_dev,
                 cam->cam_mode = sif_mode;
                 cam->nmodes = sizeof sif_mode / sizeof sif_mode[0];
         }
-        cam->dev_name = (char *) id->driver_info;
         sd->brightness = sd_ctrls[SD_BRIGHTNESS].qctrl.default_value;
         sd->contrast = sd_ctrls[SD_CONTRAST].qctrl.default_value;
         sd->colors = sd_ctrls[SD_COLOR].qctrl.default_value;
@@ -2129,21 +2125,20 @@ static const struct sd_desc sd_desc = {
 };
 
 /* -- module initialisation -- */
-#define DVNM(name) .driver_info = (kernel_ulong_t) name
 static const __devinitdata struct usb_device_id device_table[] = {
-        {USB_DEVICE(0x041e, 0x4052), DVNM("Creative Live! VISTA IM")},
-        {USB_DEVICE(0x041e, 0x405f), DVNM("Creative Live! VISTA VF0330")},
-        {USB_DEVICE(0x041e, 0x4060), DVNM("Creative Live! VISTA VF0350")},
-        {USB_DEVICE(0x041e, 0x4061), DVNM("Creative Live! VISTA VF0400")},
-        {USB_DEVICE(0x041e, 0x4064), DVNM("Creative Live! VISTA VF0420")},
-        {USB_DEVICE(0x041e, 0x4068), DVNM("Creative Live! VISTA VF0470")},
-        {USB_DEVICE(0x045e, 0x028c), DVNM("Microsoft xbox cam")},
-        {USB_DEVICE(0x054c, 0x0154), DVNM("Sonny toy4")},
-        {USB_DEVICE(0x054c, 0x0155), DVNM("Sonny toy5")},
-        {USB_DEVICE(0x05a9, 0x0519), DVNM("OmniVision")},
-        {USB_DEVICE(0x05a9, 0x0530), DVNM("OmniVision")},
-        {USB_DEVICE(0x05a9, 0x4519), DVNM("OmniVision")},
-        {USB_DEVICE(0x05a9, 0x8519), DVNM("OmniVision")},
+        {USB_DEVICE(0x041e, 0x4052)},
+        {USB_DEVICE(0x041e, 0x405f)},
+        {USB_DEVICE(0x041e, 0x4060)},
+        {USB_DEVICE(0x041e, 0x4061)},
+        {USB_DEVICE(0x041e, 0x4064)},
+        {USB_DEVICE(0x041e, 0x4068)},
+        {USB_DEVICE(0x045e, 0x028c)},
+        {USB_DEVICE(0x054c, 0x0154)},
+        {USB_DEVICE(0x054c, 0x0155)},
+        {USB_DEVICE(0x05a9, 0x0519)},
+        {USB_DEVICE(0x05a9, 0x0530)},
+        {USB_DEVICE(0x05a9, 0x4519)},
+        {USB_DEVICE(0x05a9, 0x8519)},
         {}
 };
 #undef DVNAME
@@ -2169,7 +2164,7 @@ static int __init sd_mod_init(void)
 {
         if (usb_register(&sd_driver) < 0)
                 return -1;
-        PDEBUG(D_PROBE, "v%s registered", version);
+        PDEBUG(D_PROBE, "registered");
         return 0;
 }
 static void __exit sd_mod_exit(void)
diff --git a/drivers/media/video/gspca/pac207.c b/drivers/media/video/gspca/pac207.c
index fa7abc411090..7ef18d578811 100644
--- a/drivers/media/video/gspca/pac207.c
+++ b/drivers/media/video/gspca/pac207.c
@@ -27,9 +27,6 @@
 
 #include "gspca.h"
 
-#define DRIVER_VERSION_NUMBER   KERNEL_VERSION(2, 1, 7)
-static const char version[] = "2.1.7";
-
 MODULE_AUTHOR("Hans de Goede <j.w.r.degoede@hhs.nl>");
 MODULE_DESCRIPTION("Pixart PAC207");
 MODULE_LICENSE("GPL");
@@ -208,7 +205,7 @@ static int pac207_write_regs(struct gspca_dev *gspca_dev, u16 index,
 }
 
 
-int pac207_write_reg(struct gspca_dev *gspca_dev, u16 index, u16 value)
+static int pac207_write_reg(struct gspca_dev *gspca_dev, u16 index, u16 value)
 {
         struct usb_device *udev = gspca_dev->dev;
         int err;
@@ -223,8 +220,7 @@ int pac207_write_reg(struct gspca_dev *gspca_dev, u16 index, u16 value)
         return err;
 }
 
-
-int pac207_read_reg(struct gspca_dev *gspca_dev, u16 index)
+static int pac207_read_reg(struct gspca_dev *gspca_dev, u16 index)
 {
         struct usb_device *udev = gspca_dev->dev;
         int res;
@@ -574,17 +570,16 @@ static const struct sd_desc sd_desc = {
 };
 
 /* -- module initialisation -- */
-#define DVNM(name) .driver_info = (kernel_ulong_t) name
 static const __devinitdata struct usb_device_id device_table[] = {
-        {USB_DEVICE(0x041e, 0x4028), DVNM("Creative Webcam Vista Plus")},
-        {USB_DEVICE(0x093a, 0x2460), DVNM("Q-Tec Webcam 100")},
-        {USB_DEVICE(0x093a, 0x2463), DVNM("Philips spc200nc pac207")},
-        {USB_DEVICE(0x093a, 0x2464), DVNM("Labtec Webcam 1200")},
-        {USB_DEVICE(0x093a, 0x2468), DVNM("PAC207")},
-        {USB_DEVICE(0x093a, 0x2470), DVNM("Genius GF112")},
-        {USB_DEVICE(0x093a, 0x2471), DVNM("Genius VideoCam GE111")},
-        {USB_DEVICE(0x093a, 0x2472), DVNM("Genius VideoCam GE110")},
-        {USB_DEVICE(0x2001, 0xf115), DVNM("D-Link DSB-C120")},
+        {USB_DEVICE(0x041e, 0x4028)},
+        {USB_DEVICE(0x093a, 0x2460)},
+        {USB_DEVICE(0x093a, 0x2463)},
+        {USB_DEVICE(0x093a, 0x2464)},
+        {USB_DEVICE(0x093a, 0x2468)},
+        {USB_DEVICE(0x093a, 0x2470)},
+        {USB_DEVICE(0x093a, 0x2471)},
+        {USB_DEVICE(0x093a, 0x2472)},
+        {USB_DEVICE(0x2001, 0xf115)},
         {}
 };
 MODULE_DEVICE_TABLE(usb, device_table);
@@ -609,7 +604,7 @@ static int __init sd_mod_init(void)
 {
         if (usb_register(&sd_driver) < 0)
                 return -1;
-        PDEBUG(D_PROBE, "v%s registered", version);
+        PDEBUG(D_PROBE, "registered");
         return 0;
 }
 static void __exit sd_mod_exit(void)
diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/video/gspca/pac7311.c
index 5c052e31be4a..ea3d7021f401 100644
--- a/drivers/media/video/gspca/pac7311.c
+++ b/drivers/media/video/gspca/pac7311.c
@@ -23,9 +23,6 @@
 
 #include "gspca.h"
 
-#define DRIVER_VERSION_NUMBER   KERNEL_VERSION(2, 1, 7)
-static const char version[] = "2.1.7";
-
 MODULE_AUTHOR("Thomas Kaiser thomas@kaiser-linux.li");
 MODULE_DESCRIPTION("Pixart PAC7311");
 MODULE_LICENSE("GPL");
@@ -266,7 +263,6 @@ static int sd_config(struct gspca_dev *gspca_dev,
         reg_w(gspca_dev, 0x3e, 0x20);
 
         cam = &gspca_dev->cam;
-        cam->dev_name = (char *) id->driver_info;
         cam->epaddr = 0x05;
         cam->cam_mode = vga_mode;
         cam->nmodes = ARRAY_SIZE(vga_mode);
@@ -713,16 +709,14 @@ static struct sd_desc sd_desc = {
 };
 
 /* -- module initialisation -- */
-#define DVNM(name) .driver_info = (kernel_ulong_t) name
 static __devinitdata struct usb_device_id device_table[] = {
-        {USB_DEVICE(0x093a, 0x2600), DVNM("Typhoon")},
-        {USB_DEVICE(0x093a, 0x2601), DVNM("Philips SPC610NC")},
-        {USB_DEVICE(0x093a, 0x2603), DVNM("PAC7312")},
-        {USB_DEVICE(0x093a, 0x2608), DVNM("Trust WB-3300p")},
-        {USB_DEVICE(0x093a, 0x260e), DVNM("Gigaware VGA PC Camera")},
-                        /* and also ', Trust WB-3350p, SIGMA cam 2350' */
-        {USB_DEVICE(0x093a, 0x260f), DVNM("SnakeCam")},
-        {USB_DEVICE(0x093a, 0x2621), DVNM("PAC731x")},
+        {USB_DEVICE(0x093a, 0x2600)},
+        {USB_DEVICE(0x093a, 0x2601)},
+        {USB_DEVICE(0x093a, 0x2603)},
+        {USB_DEVICE(0x093a, 0x2608)},
+        {USB_DEVICE(0x093a, 0x260e)},
+        {USB_DEVICE(0x093a, 0x260f)},
+        {USB_DEVICE(0x093a, 0x2621)},
         {}
 };
 MODULE_DEVICE_TABLE(usb, device_table);
@@ -747,7 +741,7 @@ static int __init sd_mod_init(void)
 {
         if (usb_register(&sd_driver) < 0)
                 return -1;
-        PDEBUG(D_PROBE, "v%s registered", version);
+        PDEBUG(D_PROBE, "registered");
         return 0;
 }
 static void __exit sd_mod_exit(void)
diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c
index dbeebe8625c5..e18748c5a14d 100644
--- a/drivers/media/video/gspca/sonixb.c
+++ b/drivers/media/video/gspca/sonixb.c
@@ -24,9 +24,6 @@
 
 #include "gspca.h"
 
-#define DRIVER_VERSION_NUMBER   KERNEL_VERSION(2, 1, 8)
-static const char version[] = "2.1.8";
-
 MODULE_AUTHOR("Michel Xhaard <mxhaard@users.sourceforge.net>");
 MODULE_DESCRIPTION("GSPCA/SN9C102 USB Camera Driver");
 MODULE_LICENSE("GPL");
@@ -44,25 +41,29 @@ struct sd {
         unsigned char brightness;
         unsigned char autogain;
         unsigned char autogain_ignore_frames;
+        unsigned char frames_to_drop;
         unsigned char freq;             /* light freq filter setting */
-        unsigned char saturation;
-        unsigned char hue;
-        unsigned char contrast;
 
         unsigned char fr_h_sz;          /* size of frame header */
         char sensor;                    /* Type of image sensor chip */
 #define SENSOR_HV7131R 0
 #define SENSOR_OV6650 1
 #define SENSOR_OV7630 2
-#define SENSOR_OV7630_3 3
-#define SENSOR_PAS106 4
-#define SENSOR_PAS202 5
-#define SENSOR_TAS5110 6
-#define SENSOR_TAS5130CXX 7
+#define SENSOR_PAS106 3
+#define SENSOR_PAS202 4
+#define SENSOR_TAS5110 5
+#define SENSOR_TAS5130CXX 6
         char sensor_has_gain;
         __u8 sensor_addr;
+        __u8 reg11;
 };
 
+/* flags used in the device id table */
+#define F_GAIN 0x01             /* has gain */
+#define F_AUTO 0x02             /* has autogain */
+#define F_SIF  0x04             /* sif or vga */
+#define F_H18  0x08             /* long (18 b) or short (12 b) frame header */
+
 #define COMP2 0x8f
 #define COMP 0xc7               /* 0x87 //0x07 */
 #define COMP1 0xc9              /* 0x89 //0x09 */
@@ -92,12 +93,6 @@ static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val);
 static int sd_getautogain(struct gspca_dev *gspca_dev, __s32 *val);
 static int sd_setfreq(struct gspca_dev *gspca_dev, __s32 val);
 static int sd_getfreq(struct gspca_dev *gspca_dev, __s32 *val);
-static int sd_setsaturation(struct gspca_dev *gspca_dev, __s32 val);
-static int sd_getsaturation(struct gspca_dev *gspca_dev, __s32 *val);
-static int sd_sethue(struct gspca_dev *gspca_dev, __s32 val);
-static int sd_gethue(struct gspca_dev *gspca_dev, __s32 *val);
-static int sd_setcontrast(struct gspca_dev *gspca_dev, __s32 val);
-static int sd_getcontrast(struct gspca_dev *gspca_dev, __s32 *val);
 
 static struct ctrl sd_ctrls[] = {
         {
@@ -174,48 +169,6 @@ static struct ctrl sd_ctrls[] = {
                 .set = sd_setfreq,
                 .get = sd_getfreq,
         },
-        {
-                {
-                        .id      = V4L2_CID_SATURATION,
-                        .type    = V4L2_CTRL_TYPE_INTEGER,
-                        .name    = "Saturation",
-                        .minimum = 0,
-                        .maximum = 255,
-                        .step    = 1,
-#define SATURATION_DEF 127
-                        .default_value = SATURATION_DEF,
-                },
-                .set = sd_setsaturation,
-                .get = sd_getsaturation,
-        },
-        {
-                {
-                        .id      = V4L2_CID_HUE,
-                        .type    = V4L2_CTRL_TYPE_INTEGER,
-                        .name    = "Hue",
-                        .minimum = 0,
-                        .maximum = 255,
-                        .step    = 1,
-#define HUE_DEF 127
-                        .default_value = HUE_DEF,
-                },
-                .set = sd_sethue,
-                .get = sd_gethue,
-        },
-        {
-                {
-                        .id      = V4L2_CID_CONTRAST,
-                        .type    = V4L2_CTRL_TYPE_INTEGER,
-                        .name    = "Contrast",
-                        .minimum = 0,
-                        .maximum = 255,
-                        .step    = 1,
-#define CONTRAST_DEF 127
-                        .default_value = CONTRAST_DEF,
-                },
-                .set = sd_setcontrast,
-                .get = sd_getcontrast,
-        },
 };
 
 static struct v4l2_pix_format vga_mode[] = {
@@ -248,8 +201,6 @@ static struct v4l2_pix_format sif_mode[] = {
                 .priv = 0},
 };
 
-static const __u8 probe_ov7630[] = {0x08, 0x44};
-
 static const __u8 initHv7131[] = {
         0x46, 0x77, 0x00, 0x04, 0x00, 0x00, 0x00, 0x80, 0x11, 0x00, 0x00, 0x00,
         0x00, 0x00,
@@ -321,7 +272,7 @@ static const __u8 initOv7630_3[] = {
         0x10, 0x20, 0x30, 0x40, 0x50, 0x60, 0x70, 0x80, /* r21 .. r28 */
         0x90, 0xa0, 0xb0, 0xc0, 0xd0, 0xe0, 0xf0, 0xff  /* r29 .. r30 */
 };
-static const __u8 ov7630_sensor_init_com[][8] = {
+static const __u8 ov7630_sensor_init[][8] = {
         {0xa0, 0x21, 0x12, 0x80, 0x00, 0x00, 0x00, 0x10},
         {0xb0, 0x21, 0x01, 0x77, 0x3a, 0x00, 0x00, 0x10},
 /*      {0xd0, 0x21, 0x12, 0x7c, 0x01, 0x80, 0x34, 0x10},          jfm */
@@ -342,17 +293,6 @@ static const __u8 ov7630_sensor_init_com[][8] = {
         {0xa0, 0x21, 0x7d, 0xf7, 0x8e, 0x00, 0x30, 0x10},
         {0xd0, 0x21, 0x17, 0x1c, 0xbd, 0x06, 0xf6, 0x10},
 };
-static const __u8 ov7630_sensor_init[][8] = {
-        {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, /* delay 200ms */
-        {0xa0, 0x21, 0x11, 0x01, 0xbd, 0x06, 0xf6, 0x10},       /* jfm */
-        {0xa0, 0x21, 0x10, 0x57, 0xbd, 0x06, 0xf6, 0x16},
-        {0xa0, 0x21, 0x76, 0x02, 0xbd, 0x06, 0xf6, 0x16},
-        {0xa0, 0x21, 0x00, 0x10, 0xbd, 0x06, 0xf6, 0x15},       /* gain */
-};
-static const __u8 ov7630_sensor_init_3[][8] = {
-        {0xa0, 0x21, 0x2a, 0xa0, 0x00, 0x00, 0x00, 0x10},
-        {0xa0, 0x21, 0x2a, 0x80, 0x00, 0x00, 0x00, 0x10},
-};
 
 static const __u8 initPas106[] = {
         0x04, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x81, 0x40, 0x00, 0x00, 0x00,
@@ -542,7 +482,6 @@ static void setbrightness(struct gspca_dev *gspca_dev)
 
         switch (sd->sensor) {
         case  SENSOR_OV6650:
-        case  SENSOR_OV7630_3:
         case  SENSOR_OV7630: {
                 __u8 i2cOV[] =
                         {0xa0, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00, 0x10};
@@ -635,7 +574,7 @@ static void setsensorgain(struct gspca_dev *gspca_dev)
         case SENSOR_OV6650:
                 gain >>= 1;
                 /* fall thru */
-        case SENSOR_OV7630_3: {
+        case SENSOR_OV7630: {
                 __u8 i2c[] = {0xa0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10};
 
                 i2c[1] = sd->sensor_addr;
@@ -690,7 +629,7 @@ static void setexposure(struct gspca_dev *gspca_dev)
                 break;
             }
         case SENSOR_OV6650:
-        case SENSOR_OV7630_3: {
+        case SENSOR_OV7630: {
                 /* The ov6650 / ov7630 have 2 registers which both influence
                    exposure, register 11, whose low nibble sets the nr off fps
                    according to: fps = 30 / (low_nibble + 1)
@@ -705,16 +644,20 @@ static void setexposure(struct gspca_dev *gspca_dev)
                    The code maps our 0 - 510 ms exposure ctrl to these 2
                    registers, trying to keep fps as high as possible.
                 */
-                __u8 i2c[] = {0xb0, 0x00, 0x10, 0x00, 0xc0, 0x00, 0x00, 0x10};
-                int reg10, reg11;
+                __u8 i2c[] = {0xb0, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x10};
+                int reg10, reg11, reg10_max;
+
                 /* ov6645 datasheet says reg10_max is 9a, but that uses
                    tline * 2 * reg10 as formula for calculating texpo, the
                    ov6650 probably uses the same formula as the 7730 which uses
                    tline * 4 * reg10, which explains why the reg10max we've
                    found experimentally for the ov6650 is exactly half that of
                    the ov6645. The ov7630 datasheet says the max is 0x41. */
-                const int reg10_max = (sd->sensor == SENSOR_OV6650)
-                                ? 0x4d : 0x41;
+                if (sd->sensor == SENSOR_OV6650) {
+                        reg10_max = 0x4d;
+                        i2c[4] = 0xc0; /* OV6650 needs non default vsync pol */
+                } else
+                        reg10_max = 0x41;
 
                 reg11 = (60 * sd->exposure + 999) / 1000;
                 if (reg11 < 1)
@@ -735,20 +678,23 @@ static void setexposure(struct gspca_dev *gspca_dev)
                 else if (reg10 > reg10_max)
                         reg10 = reg10_max;
 
+                /* In 640x480, if the reg11 has less than 3, the image is
+                   unstable (not enough bandwidth). */
+                if (gspca_dev->width == 640 && reg11 < 3)
+                        reg11 = 3;
+
                 /* Write reg 10 and reg11 low nibble */
                 i2c[1] = sd->sensor_addr;
                 i2c[3] = reg10;
                 i2c[4] |= reg11 - 1;
-                if (sd->sensor == SENSOR_OV7630_3) {
-                        __u8 reg76 = reg10 & 0x03;
-                        __u8 i2c_reg76[] = {0xa0, 0x21, 0x76, 0x00,
-                                            0x00, 0x00, 0x00, 0x10};
-                        reg10 >>= 2;
-                        i2c_reg76[3] = reg76;
-                        if (i2c_w(gspca_dev, i2c_reg76) < 0)
-                                PDEBUG(D_ERR, "i2c error exposure");
-                }
-                if (i2c_w(gspca_dev, i2c) < 0)
+
+                /* If register 11 didn't change, don't change it */
+                if (sd->reg11 == reg11 )
+                        i2c[0] = 0xa0;
+
+                if (i2c_w(gspca_dev, i2c) == 0)
+                        sd->reg11 = reg11;
+                else
                         PDEBUG(D_ERR, "i2c error exposure");
                 break;
             }
@@ -761,11 +707,11 @@ static void setfreq(struct gspca_dev *gspca_dev)
 
         switch (sd->sensor) {
         case SENSOR_OV6650:
-        case SENSOR_OV7630_3: {
+        case SENSOR_OV7630: {
                 /* Framerate adjust register for artificial light 50 hz flicker
-                   compensation, identical to ov6630 0x2b register, see ov6630
-                   datasheet.
-                   0x4f -> (30 fps -> 25 fps), 0x00 -> no adjustment */
+                   compensation, for the ov6650 this is identical to ov6630
+                   0x2b register, see ov6630 datasheet.
+                   0x4f / 0x8a -> (30 fps -> 25 fps), 0x00 -> no adjustment */
                 __u8 i2c[] = {0xa0, 0x00, 0x2b, 0x00, 0x00, 0x00, 0x00, 0x10};
                 switch (sd->freq) {
                 default:
@@ -786,69 +732,6 @@ static void setfreq(struct gspca_dev *gspca_dev)
         }
 }
 
-static void setsaturation(struct gspca_dev *gspca_dev)
-{
-        struct sd *sd = (struct sd *) gspca_dev;
-
-        switch (sd->sensor) {
-/*      case SENSOR_OV6650: */
-        case SENSOR_OV7630_3:
-        case SENSOR_OV7630: {
-                __u8 i2c[] = {0xa0, 0x00, 0x03, 0x00, 0x00, 0x00, 0x00, 0x10};
-                i2c[1] = sd->sensor_addr;
-                i2c[3] = sd->saturation & 0xf0;
-                if (i2c_w(gspca_dev, i2c) < 0)
-                        PDEBUG(D_ERR, "i2c error setsaturation");
-                else
-                        PDEBUG(D_CONF, "saturation set to: %d",
-                                (int)sd->saturation);
-                break;
-            }
-        }
-}
-
-static void sethue(struct gspca_dev *gspca_dev)
-{
-        struct sd *sd = (struct sd *) gspca_dev;
-
-        switch (sd->sensor) {
-/*      case SENSOR_OV6650: */
-        case SENSOR_OV7630_3:
-        case SENSOR_OV7630: {
-                __u8 i2c[] = {0xa0, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x10};
-                i2c[1] = sd->sensor_addr;
-                i2c[3] = 0x20 | (sd->hue >> 3);
-                if (i2c_w(gspca_dev, i2c) < 0)
-                        PDEBUG(D_ERR, "i2c error setsaturation");
-                else
-                        PDEBUG(D_CONF, "hue set to: %d", (int)sd->hue);
-                break;
-            }
-        }
-}
-
-static void setcontrast(struct gspca_dev *gspca_dev)
-{
-        struct sd *sd = (struct sd *) gspca_dev;
-
-        switch (sd->sensor) {
-/*      case SENSOR_OV6650: */
-        case SENSOR_OV7630_3:
-        case SENSOR_OV7630: {
-                __u8 i2c[] = {0xa0, 0x00, 0x05, 0x00, 0x00, 0x00, 0x00, 0x10};
-                i2c[1] = sd->sensor_addr;
-                i2c[3] = 0x20 | (sd->contrast >> 3);
-                if (i2c_w(gspca_dev, i2c) < 0)
-                        PDEBUG(D_ERR, "i2c error setcontrast");
-                else
-                        PDEBUG(D_CONF, "contrast set to: %d",
-                                (int)sd->contrast);
-                break;
-            }
-        }
-}
-
-
 static void do_autogain(struct gspca_dev *gspca_dev)
 {
         struct sd *sd = (struct sd *) gspca_dev;
@@ -874,88 +757,32 @@ static int sd_config(struct gspca_dev *gspca_dev,
 {
         struct sd *sd = (struct sd *) gspca_dev;
         struct cam *cam;
-        __u16 product;
         int sif = 0;
 
         /* nctrls depends upon the sensor, so we use a per cam copy */
         memcpy(&sd->sd_desc, gspca_dev->sd_desc, sizeof(struct sd_desc));
         gspca_dev->sd_desc = &sd->sd_desc;
 
-        sd->fr_h_sz = 12;               /* default size of the frame header */
-        sd->sd_desc.nctrls = 2;         /* default nb of ctrls */
-        sd->autogain = AUTOGAIN_DEF;    /* default is autogain active */
-
-        product = id->idProduct;
-/*      switch (id->idVendor) { */
-/*      case 0x0c45:                             * Sonix */
-                switch (product) {
-                case 0x6001:                    /* SN9C102 */
-                case 0x6005:                    /* SN9C101 */
-                case 0x6007:                    /* SN9C101 */
-                        sd->sensor = SENSOR_TAS5110;
-                        sd->sensor_has_gain = 1;
-                        sd->sd_desc.nctrls = 4;
-                        sd->sd_desc.dq_callback = do_autogain;
-                        sif = 1;
-                        break;
-                case 0x6009:                    /* SN9C101 */
-                case 0x600d:                    /* SN9C101 */
-                case 0x6029:                    /* SN9C101 */
-                        sd->sensor = SENSOR_PAS106;
-                        sif = 1;
-                        break;
-                case 0x6011:                    /* SN9C101 - SN9C101G */
-                        sd->sensor = SENSOR_OV6650;
-                        sd->sensor_has_gain = 1;
-                        sd->sensor_addr = 0x60;
-                        sd->sd_desc.nctrls = 5;
-                        sd->sd_desc.dq_callback = do_autogain;
-                        sif = 1;
-                        break;
-                case 0x6019:                    /* SN9C101 */
-                case 0x602c:                    /* SN9C102 */
-                case 0x602e:                    /* SN9C102 */
-                        sd->sensor = SENSOR_OV7630;
-                        sd->sensor_addr = 0x21;
-                        break;
-                case 0x60b0:                    /* SN9C103 */
-                        sd->sensor = SENSOR_OV7630_3;
-                        sd->sensor_addr = 0x21;
-                        sd->fr_h_sz = 18;       /* size of frame header */
-                        sd->sensor_has_gain = 1;
-                        sd->sd_desc.nctrls = 8;
-                        sd->sd_desc.dq_callback = do_autogain;
-                        sd->autogain = 0;
-                        break;
-                case 0x6024:                    /* SN9C102 */
-                case 0x6025:                    /* SN9C102 */
-                        sd->sensor = SENSOR_TAS5130CXX;
-                        break;
-                case 0x6028:                    /* SN9C102 */
-                        sd->sensor = SENSOR_PAS202;
-                        break;
-                case 0x602d:                    /* SN9C102 */
-                        sd->sensor = SENSOR_HV7131R;
-                        break;
-                case 0x60af:                    /* SN9C103 */
-                        sd->sensor = SENSOR_PAS202;
-                        sd->fr_h_sz = 18;       /* size of frame header (?) */
-                        break;
-                }
-/*              break; */
-/*      } */
+        /* copy the webcam info from the device id */
+        sd->sensor = (id->driver_info >> 24) & 0xff;
+        if (id->driver_info & (F_GAIN << 16))
+                sd->sensor_has_gain = 1;
+        if (id->driver_info & (F_AUTO << 16))
+                sd->sd_desc.dq_callback = do_autogain;
+        if (id->driver_info & (F_SIF << 16))
+                sif = 1;
+        if (id->driver_info & (F_H18 << 16))
+                sd->fr_h_sz = 18;               /* size of frame header */
+        else
+                sd->fr_h_sz = 12;
+        sd->sd_desc.nctrls = (id->driver_info >> 8) & 0xff;
+        sd->sensor_addr = id->driver_info & 0xff;
 
         cam = &gspca_dev->cam;
-        cam->dev_name = (char *) id->driver_info;
         cam->epaddr = 0x01;
         if (!sif) {
                 cam->cam_mode = vga_mode;
                 cam->nmodes = ARRAY_SIZE(vga_mode);
-                if (sd->sensor == SENSOR_OV7630_3) {
-                        /* We only have 320x240 & 640x480 */
-                        cam->cam_mode++;
-                        cam->nmodes--;
-                }
         } else {
                 cam->cam_mode = sif_mode;
                 cam->nmodes = ARRAY_SIZE(sif_mode);
@@ -963,12 +790,9 @@ static int sd_config(struct gspca_dev *gspca_dev,
         sd->brightness = BRIGHTNESS_DEF;
         sd->gain = GAIN_DEF;
         sd->exposure = EXPOSURE_DEF;
+        sd->autogain = AUTOGAIN_DEF;
         sd->freq = FREQ_DEF;
-        sd->contrast = CONTRAST_DEF;
-        sd->saturation = SATURATION_DEF;
-        sd->hue = HUE_DEF;
-        if (sd->sensor == SENSOR_OV7630_3)      /* jfm: from win trace */
-                reg_w(gspca_dev, 0x01, probe_ov7630, sizeof probe_ov7630);
+
         return 0;
 }
 
@@ -1002,9 +826,8 @@ static void pas106_i2cinit(struct gspca_dev *gspca_dev)
 static void sd_start(struct gspca_dev *gspca_dev)
 {
         struct sd *sd = (struct sd *) gspca_dev;
-        int mode, l;
+        int mode, l = 0x1f;
         const __u8 *sn9c10x;
-        __u8 reg01, reg17;
         __u8 reg17_19[3];
 
         mode = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv;
@@ -1022,13 +845,11 @@ static void sd_start(struct gspca_dev *gspca_dev)
                 reg17_19[2] = 0x20;
                 break;
         case SENSOR_OV7630:
-                sn9c10x = initOv7630;
-                reg17_19[0] = 0x68;
-                reg17_19[1] = (mode << 4) | COMP2;
-                reg17_19[2] = MCK_INIT1;
-                break;
-        case SENSOR_OV7630_3:
-                sn9c10x = initOv7630_3;
+                if (sd->fr_h_sz == 18) { /* SN9C103 */
+                        sn9c10x = initOv7630_3;
+                        l = sizeof initOv7630_3;
+                } else
+                        sn9c10x = initOv7630;
                 reg17_19[0] = 0x68;
                 reg17_19[1] = (mode << 4) | COMP2;
                 reg17_19[2] = MCK_INIT1;
@@ -1059,30 +880,11 @@ static void sd_start(struct gspca_dev *gspca_dev)
                 reg17_19[2] = mode ? 0x23 : 0x43;
                 break;
         }
-        switch (sd->sensor) {
-        case SENSOR_OV7630:
-                reg01 = 0x06;
-                reg17 = 0x29;
-                l = sizeof initOv7630;
-                break;
-        case SENSOR_OV7630_3:
-                reg01 = 0x44;
-                reg17 = 0x68;
-                l = sizeof initOv7630_3;
-                break;
-        default:
-                reg01 = sn9c10x[0];
-                reg17 = sn9c10x[0x17 - 1];
-                l = 0x1f;
-                break;
-        }
 
         /* reg 0x01 bit 2 video transfert on */
-        reg_w(gspca_dev, 0x01, &reg01, 1);
+        reg_w(gspca_dev, 0x01, &sn9c10x[0x01 - 1], 1);
         /* reg 0x17 SensorClk enable inv Clk 0x60 */
-        reg_w(gspca_dev, 0x17, &reg17, 1);
-/*fixme: for ov7630 102
-        reg_w(gspca_dev, 0x01, {0x06, sn9c10x[1]}, 2); */
+        reg_w(gspca_dev, 0x17, &sn9c10x[0x17 - 1], 1);
         /* Set the registers from the template */
         reg_w_big(gspca_dev, 0x01, sn9c10x, l);
         switch (sd->sensor) {
@@ -1095,17 +897,13 @@ static void sd_start(struct gspca_dev *gspca_dev)
                                 sizeof ov6650_sensor_init);
                 break;
         case SENSOR_OV7630:
-                i2c_w_vector(gspca_dev, ov7630_sensor_init_com,
-                                sizeof ov7630_sensor_init_com);
-                msleep(200);
                 i2c_w_vector(gspca_dev, ov7630_sensor_init,
                                 sizeof ov7630_sensor_init);
-                break;
-        case SENSOR_OV7630_3:
-                i2c_w_vector(gspca_dev, ov7630_sensor_init_com,
-                                sizeof ov7630_sensor_init_com);
-                msleep(200);
-                i2c_w(gspca_dev, ov7630_sensor_init_3[mode]);
+                if (sd->fr_h_sz == 18) { /* SN9C103 */
+                        const __u8 i2c[] = { 0xa0, 0x21, 0x13, 0x80, 0x00,
+                                                0x00, 0x00, 0x10 };
+                        i2c_w(gspca_dev, i2c);
+                }
                 break;
         case SENSOR_PAS106:
                 pas106_i2cinit(gspca_dev);
@@ -1145,14 +943,14 @@ static void sd_start(struct gspca_dev *gspca_dev)
         reg_w(gspca_dev, 0x18, &reg17_19[1], 2);
         msleep(20);
 
+        sd->reg11 = -1;
+
         setgain(gspca_dev);
         setbrightness(gspca_dev);
         setexposure(gspca_dev);
         setfreq(gspca_dev);
-        setsaturation(gspca_dev);
-        sethue(gspca_dev);
-        setcontrast(gspca_dev);
 
+        sd->frames_to_drop = 0;
         sd->autogain_ignore_frames = 0;
         atomic_set(&sd->avg_lum, -1);
 }
@@ -1198,21 +996,31 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
                             && data[3 + i] == 0xc4
                             && data[4 + i] == 0xc4
                             && data[5 + i] == 0x96) {   /* start of frame */
-                                frame = gspca_frame_add(gspca_dev, LAST_PACKET,
-                                                        frame, data, 0);
+                                int lum = -1;
+                                int pkt_type = LAST_PACKET;
+
                                 if (len - i < sd->fr_h_sz) {
-                                        atomic_set(&sd->avg_lum, -1);
                                         PDEBUG(D_STREAM, "packet too short to"
                                                 " get avg brightness");
                                 } else if (sd->fr_h_sz == 12) {
-                                        atomic_set(&sd->avg_lum,
-                                                data[i + 8] +
-                                                        (data[i + 9] << 8));
+                                        lum = data[i + 8] + (data[i + 9] << 8);
                                 } else {
-                                        atomic_set(&sd->avg_lum,
-                                                data[i + 9] +
-                                                        (data[i + 10] << 8));
+                                        lum = data[i + 9] +
+                                                (data[i + 10] << 8);
+                                }
+                                if (lum == 0) {
+                                        lum = -1;
+                                        sd->frames_to_drop = 2;
+                                }
+                                atomic_set(&sd->avg_lum, lum);
+
+                                if (sd->frames_to_drop) {
+                                        sd->frames_to_drop--;
+                                        pkt_type = DISCARD_PACKET;
                                 }
+
+                                frame = gspca_frame_add(gspca_dev, pkt_type,
+                                                        frame, data, 0);
                                 data += i + sd->fr_h_sz;
                                 len -= i + sd->fr_h_sz;
                                 gspca_frame_add(gspca_dev, FIRST_PACKET,
@@ -1327,60 +1135,6 @@ static int sd_getfreq(struct gspca_dev *gspca_dev, __s32 *val)
         return 0;
 }
 
-static int sd_setsaturation(struct gspca_dev *gspca_dev, __s32 val)
-{
-        struct sd *sd = (struct sd *) gspca_dev;
-
-        sd->saturation = val;
-        if (gspca_dev->streaming)
-                setsaturation(gspca_dev);
-        return 0;
-}
-
-static int sd_getsaturation(struct gspca_dev *gspca_dev, __s32 *val)
-{
-        struct sd *sd = (struct sd *) gspca_dev;
-
-        *val = sd->saturation;
-        return 0;
-}
-
-static int sd_sethue(struct gspca_dev *gspca_dev, __s32 val)
-{
-        struct sd *sd = (struct sd *) gspca_dev;
-
-        sd->hue = val;
-        if (gspca_dev->streaming)
-                sethue(gspca_dev);
-        return 0;
-}
-
-static int sd_gethue(struct gspca_dev *gspca_dev, __s32 *val)
-{
-        struct sd *sd = (struct sd *) gspca_dev;
-
-        *val = sd->hue;
-        return 0;
-}
-
-static int sd_setcontrast(struct gspca_dev *gspca_dev, __s32 val)
-{
-        struct sd *sd = (struct sd *) gspca_dev;
-
-        sd->contrast = val;
-        if (gspca_dev->streaming)
-                setcontrast(gspca_dev);
-        return 0;
-}
-
-static int sd_getcontrast(struct gspca_dev *gspca_dev, __s32 *val)
-{
-        struct sd *sd = (struct sd *) gspca_dev;
-
-        *val = sd->contrast;
-        return 0;
-}
-
 static int sd_querymenu(struct gspca_dev *gspca_dev,
                         struct v4l2_querymenu *menu)
 {
@@ -1418,27 +1172,47 @@ static const struct sd_desc sd_desc = {
 };
 
 /* -- module initialisation -- */
-#define DVNM(name) .driver_info = (kernel_ulong_t) name
+#define SFCI(sensor, flags, nctrls, i2c_addr) \
+        .driver_info = (SENSOR_ ## sensor << 24) \
+                        | ((flags) << 16) \
+                        | ((nctrls) << 8) \
+                        | (i2c_addr)
 static __devinitdata struct usb_device_id device_table[] = {
 #ifndef CONFIG_USB_SN9C102
-        {USB_DEVICE(0x0c45, 0x6001), DVNM("Genius VideoCAM NB")},
-        {USB_DEVICE(0x0c45, 0x6005), DVNM("Sweex Tas5110")},
-        {USB_DEVICE(0x0c45, 0x6007), DVNM("Sonix sn9c101 + Tas5110D")},
-        {USB_DEVICE(0x0c45, 0x6009), DVNM("spcaCam@120")},
-        {USB_DEVICE(0x0c45, 0x600d), DVNM("spcaCam@120")},
+        {USB_DEVICE(0x0c45, 0x6001),                    /* SN9C102 */
+                        SFCI(TAS5110, F_GAIN|F_AUTO|F_SIF, 4, 0)},
+        {USB_DEVICE(0x0c45, 0x6005),                    /* SN9C101 */
+                        SFCI(TAS5110, F_GAIN|F_AUTO|F_SIF, 4, 0)},
+        {USB_DEVICE(0x0c45, 0x6007),                    /* SN9C101 */
+                        SFCI(TAS5110, F_GAIN|F_AUTO|F_SIF, 4, 0)},
+        {USB_DEVICE(0x0c45, 0x6009),                    /* SN9C101 */
+                        SFCI(PAS106, F_SIF, 2, 0)},
+        {USB_DEVICE(0x0c45, 0x600d),                    /* SN9C101 */
+                        SFCI(PAS106, F_SIF, 2, 0)},
 #endif
-        {USB_DEVICE(0x0c45, 0x6011), DVNM("MAX Webcam Microdia")},
+        {USB_DEVICE(0x0c45, 0x6011),            /* SN9C101 - SN9C101G */
+                        SFCI(OV6650, F_GAIN|F_AUTO|F_SIF, 5, 0x60)},
 #ifndef CONFIG_USB_SN9C102
-        {USB_DEVICE(0x0c45, 0x6019), DVNM("Generic Sonix OV7630")},
-        {USB_DEVICE(0x0c45, 0x6024), DVNM("Generic Sonix Tas5130c")},
-        {USB_DEVICE(0x0c45, 0x6025), DVNM("Xcam Shanga")},
-        {USB_DEVICE(0x0c45, 0x6028), DVNM("Sonix Btc Pc380")},
-        {USB_DEVICE(0x0c45, 0x6029), DVNM("spcaCam@150")},
-        {USB_DEVICE(0x0c45, 0x602c), DVNM("Generic Sonix OV7630")},
-        {USB_DEVICE(0x0c45, 0x602d), DVNM("LIC-200 LG")},
-        {USB_DEVICE(0x0c45, 0x602e), DVNM("Genius VideoCam Messenger")},
-        {USB_DEVICE(0x0c45, 0x60af), DVNM("Trust WB3100P")},
-        {USB_DEVICE(0x0c45, 0x60b0), DVNM("Genius VideoCam Look")},
+        {USB_DEVICE(0x0c45, 0x6019),                    /* SN9C101 */
+                        SFCI(OV7630, F_GAIN|F_AUTO, 5, 0x21)},
+        {USB_DEVICE(0x0c45, 0x6024),                    /* SN9C102 */
+                        SFCI(TAS5130CXX, 0, 2, 0)},
+        {USB_DEVICE(0x0c45, 0x6025),                    /* SN9C102 */
+                        SFCI(TAS5130CXX, 0, 2, 0)},
+        {USB_DEVICE(0x0c45, 0x6028),                    /* SN9C102 */
+                        SFCI(PAS202, 0, 2, 0)},
+        {USB_DEVICE(0x0c45, 0x6029),                    /* SN9C101 */
+                        SFCI(PAS106, F_SIF, 2, 0)},
+        {USB_DEVICE(0x0c45, 0x602c),                    /* SN9C102 */
+                        SFCI(OV7630, F_GAIN|F_AUTO, 5, 0x21)},
+        {USB_DEVICE(0x0c45, 0x602d),                    /* SN9C102 */
+                        SFCI(HV7131R, 0, 2, 0)},
+        {USB_DEVICE(0x0c45, 0x602e),                    /* SN9C102 */
+                        SFCI(OV7630, F_GAIN|F_AUTO, 5, 0x21)},
+        {USB_DEVICE(0x0c45, 0x60af),                    /* SN9C103 */
+                        SFCI(PAS202, F_H18, 2, 0)},
+        {USB_DEVICE(0x0c45, 0x60b0),                    /* SN9C103 */
+                        SFCI(OV7630, F_GAIN|F_AUTO|F_H18, 5, 0x21)},
 #endif
         {}
 };
@@ -1464,7 +1238,7 @@ static int __init sd_mod_init(void)
 {
         if (usb_register(&sd_driver) < 0)
                 return -1;
-        PDEBUG(D_PROBE, "v%s registered", version);
+        PDEBUG(D_PROBE, "registered");
         return 0;
 }
 static void __exit sd_mod_exit(void)
diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c
index 3e68b9926956..33a3df1f6915 100644
--- a/drivers/media/video/gspca/sonixj.c
+++ b/drivers/media/video/gspca/sonixj.c
@@ -24,9 +24,6 @@
 #include "gspca.h"
 #include "jpeg.h"
 
-#define DRIVER_VERSION_NUMBER   KERNEL_VERSION(2, 1, 7)
-static const char version[] = "2.1.7";
-
 MODULE_AUTHOR("Michel Xhaard <mxhaard@users.sourceforge.net>");
 MODULE_DESCRIPTION("GSPCA/SONIX JPEG USB Camera Driver");
 MODULE_LICENSE("GPL");
@@ -361,6 +358,7 @@ static const __u8 mo4000_sensor_init[][8] = {
 };
 static const __u8 ov7660_sensor_init[][8] = {
         {0xa1, 0x21, 0x12, 0x80, 0x00, 0x00, 0x00, 0x10}, /* reset SCCB */
+/*              (delay 20ms) */
         {0xa1, 0x21, 0x12, 0x05, 0x00, 0x00, 0x00, 0x10},
                                                 /* Outformat ?? rawRGB */
         {0xa1, 0x21, 0x13, 0xb8, 0x00, 0x00, 0x00, 0x10}, /* init COM8 */
@@ -539,13 +537,31 @@ static void reg_r(struct gspca_dev *gspca_dev,
                         value, 0,
                         gspca_dev->usb_buf, len,
                         500);
+        PDEBUG(D_USBI, "reg_r [%02x] -> %02x", value, gspca_dev->usb_buf[0]);
 }
 
+static void reg_w1(struct gspca_dev *gspca_dev,
+                   __u16 value,
+                   __u8 data)
+{
+        PDEBUG(D_USBO, "reg_w1 [%02x] = %02x", value, data);
+        gspca_dev->usb_buf[0] = data;
+        usb_control_msg(gspca_dev->dev,
+                        usb_sndctrlpipe(gspca_dev->dev, 0),
+                        0x08,
+                        USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
+                        value,
+                        0,
+                        gspca_dev->usb_buf, 1,
+                        500);
+}
 static void reg_w(struct gspca_dev *gspca_dev,
                           __u16 value,
                           const __u8 *buffer,
                           int len)
 {
+        PDEBUG(D_USBO, "reg_w [%02x] = %02x %02x ..",
+                value, buffer[0], buffer[1]);
         if (len <= sizeof gspca_dev->usb_buf) {
                 memcpy(gspca_dev->usb_buf, buffer, len);
                 usb_control_msg(gspca_dev->dev,
@@ -571,31 +587,42 @@ static void reg_w(struct gspca_dev *gspca_dev,
         }
 }
 
-/* I2C write 2 bytes */
-static void i2c_w2(struct gspca_dev *gspca_dev,
-                   const __u8 *buffer)
+/* I2C write 1 byte */
+static void i2c_w1(struct gspca_dev *gspca_dev, __u8 reg, __u8 val)
 {
         struct sd *sd = (struct sd *) gspca_dev;
-        __u8 mode[8];
 
-        /* is i2c ready */
-        mode[0] = 0x81 | (2 << 4);
-        mode[1] = sd->i2c_base;
-        mode[2] = buffer[0];
-        mode[3] = buffer[1];
-        mode[4] = 0;
-        mode[5] = 0;
-        mode[6] = 0;
-        mode[7] = 0x10;
-        reg_w(gspca_dev, 0x08, mode, 8);
+        PDEBUG(D_USBO, "i2c_w2 [%02x] = %02x", reg, val);
+        gspca_dev->usb_buf[0] = 0x81 | (2 << 4);        /* = a1 */
+        gspca_dev->usb_buf[1] = sd->i2c_base;
+        gspca_dev->usb_buf[2] = reg;
+        gspca_dev->usb_buf[3] = val;
+        gspca_dev->usb_buf[4] = 0;
+        gspca_dev->usb_buf[5] = 0;
+        gspca_dev->usb_buf[6] = 0;
+        gspca_dev->usb_buf[7] = 0x10;
+        usb_control_msg(gspca_dev->dev,
+                        usb_sndctrlpipe(gspca_dev->dev, 0),
+                        0x08,
+                        USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
+                        0x08,                   /* value = i2c */
+                        0,
+                        gspca_dev->usb_buf, 8,
+                        500);
 }
 
 /* I2C write 8 bytes */
 static void i2c_w8(struct gspca_dev *gspca_dev,
                    const __u8 *buffer)
 {
-        reg_w(gspca_dev, 0x08, buffer, 8);
-        msleep(1);
+        memcpy(gspca_dev->usb_buf, buffer, 8);
+        usb_control_msg(gspca_dev->dev,
+                        usb_sndctrlpipe(gspca_dev->dev, 0),
+                        0x08,
+                        USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
+                        0x08, 0,                /* value, index */
+                        gspca_dev->usb_buf, 8,
+                        500);
 }
 
 /* read 5 bytes in gspca_dev->usb_buf */
@@ -613,24 +640,21 @@ static void i2c_r5(struct gspca_dev *gspca_dev, __u8 reg)
         mode[6] = 0;
         mode[7] = 0x10;
         i2c_w8(gspca_dev, mode);
+        msleep(2);
         mode[0] = 0x81 | (5 << 4) | 0x02;
         mode[2] = 0;
         i2c_w8(gspca_dev, mode);
+        msleep(2);
         reg_r(gspca_dev, 0x0a, 5);
 }
 
 static int probesensor(struct gspca_dev *gspca_dev)
 {
         struct sd *sd = (struct sd *) gspca_dev;
-        __u8 reg02;
-        static const __u8 datasend[] = { 2, 0 };
-        /* reg val1 val2 val3 val4 */
 
-        i2c_w2(gspca_dev, datasend);
-/* should write 0xa1 0x11 0x02 0x00 0x00 0x00 0x00 the 0x10 is add by i2cw */
+        i2c_w1(gspca_dev, 0x02, 0);                     /* sensor wakeup */
         msleep(10);
-        reg02 = 0x66;
-        reg_w(gspca_dev, 0x02, &reg02, 1);              /* Gpio on */
+        reg_w1(gspca_dev, 0x02, 0x66);                  /* Gpio on */
         msleep(10);
         i2c_r5(gspca_dev, 0);                           /* read sensor id */
         if (gspca_dev->usb_buf[0] == 0x02
@@ -642,7 +666,7 @@ static int probesensor(struct gspca_dev *gspca_dev)
                 sd->sensor = SENSOR_HV7131R;
                 return SENSOR_HV7131R;
         }
-        PDEBUG(D_PROBE, "Find Sensor %d %d %d",
+        PDEBUG(D_PROBE, "Find Sensor 0x%02x 0x%02x 0x%02x",
                 gspca_dev->usb_buf[0], gspca_dev->usb_buf[1],
                 gspca_dev->usb_buf[2]);
         PDEBUG(D_PROBE, "Sensor sn9c102P Not found");
@@ -653,8 +677,6 @@ static int configure_gpio(struct gspca_dev *gspca_dev,
                           const __u8 *sn9c1xx)
 {
         struct sd *sd = (struct sd *) gspca_dev;
-        __u8 data;
-        __u8 regF1;
         const __u8 *reg9a;
         static const __u8 reg9a_def[] =
                 {0x08, 0x40, 0x20, 0x10, 0x00, 0x04};
@@ -663,15 +685,13 @@ static int configure_gpio(struct gspca_dev *gspca_dev,
         static const __u8 reg9a_sn9c325[] =
                 {0x0a, 0x40, 0x38, 0x30, 0x00, 0x20};
 
-
-        regF1 = 0x00;
-        reg_w(gspca_dev, 0xf1, &regF1, 1);
-        reg_w(gspca_dev, 0x01, &sn9c1xx[0], 1); /*fixme:jfm was [1] en v1*/
+        reg_w1(gspca_dev, 0xf1, 0x00);
+        reg_w1(gspca_dev, 0x01, sn9c1xx[0]);    /*fixme:jfm was [1] en v1*/
 
         /* configure gpio */
         reg_w(gspca_dev, 0x01, &sn9c1xx[1], 2);
         reg_w(gspca_dev, 0x08, &sn9c1xx[8], 2);
-        reg_w(gspca_dev, 0x17, &sn9c1xx[0x17], 5);      /* jfm was 3 */
+        reg_w(gspca_dev, 0x17, &sn9c1xx[0x17], 5);      /* jfm len was 3 */
         switch (sd->bridge) {
         case BRIDGE_SN9C325:
                 reg9a = reg9a_sn9c325;
@@ -685,35 +705,25 @@ static int configure_gpio(struct gspca_dev *gspca_dev,
         }
         reg_w(gspca_dev, 0x9a, reg9a, 6);
 
-        data = 0x60;                            /*fixme:jfm 60 00 00 (3) */
-        reg_w(gspca_dev, 0xd4, &data, 1);
+        reg_w1(gspca_dev, 0xd4, 0x60);  /*fixme:jfm 60 00 00 (3) ? */
 
         reg_w(gspca_dev, 0x03, &sn9c1xx[3], 0x0f);
 
         switch (sd->bridge) {
         case BRIDGE_SN9C120:                    /* from win trace */
-                data = 0x61;
-                reg_w(gspca_dev, 0x01, &data, 1);
-                data = 0x20;
-                reg_w(gspca_dev, 0x17, &data, 1);
-                data = 0x60;
-                reg_w(gspca_dev, 0x01, &data, 1);
+                reg_w1(gspca_dev, 0x01, 0x61);
+                reg_w1(gspca_dev, 0x17, 0x20);
+                reg_w1(gspca_dev, 0x01, 0x60);
                 break;
         case BRIDGE_SN9C325:
-                data = 0x43;
-                reg_w(gspca_dev, 0x01, &data, 1);
-                data = 0xae;
-                reg_w(gspca_dev, 0x17, &data, 1);
-                data = 0x42;
-                reg_w(gspca_dev, 0x01, &data, 1);
+                reg_w1(gspca_dev, 0x01, 0x43);
+                reg_w1(gspca_dev, 0x17, 0xae);
+                reg_w1(gspca_dev, 0x01, 0x42);
                 break;
         default:
-                data = 0x43;
-                reg_w(gspca_dev, 0x01, &data, 1);
-                data = 0x61;
-                reg_w(gspca_dev, 0x17, &data, 1);
-                data = 0x42;
-                reg_w(gspca_dev, 0x01, &data, 1);
+                reg_w1(gspca_dev, 0x01, 0x43);
+                reg_w1(gspca_dev, 0x17, 0x61);
+                reg_w1(gspca_dev, 0x01, 0x42);
         }
 
         if (sd->sensor == SENSOR_HV7131R) {
@@ -770,6 +780,9 @@ static void ov7660_InitSensor(struct gspca_dev *gspca_dev)
 {
         int i = 0;
 
+        i2c_w8(gspca_dev, ov7660_sensor_init[i]);       /* reset SCCB */
+        i++;
+        msleep(20);
         while (ov7660_sensor_init[i][0]) {
                 i2c_w8(gspca_dev, ov7660_sensor_init[i]);
                 i++;
@@ -782,194 +795,16 @@ static int sd_config(struct gspca_dev *gspca_dev,
 {
         struct sd *sd = (struct sd *) gspca_dev;
         struct cam *cam;
-        __u16 vendor;
-        __u16 product;
-
-        vendor = id->idVendor;
-        product = id->idProduct;
-        sd->sensor = -1;
-        switch (vendor) {
-        case 0x0458:                            /* Genius */
-/*              switch (product) {
-                case 0x7025: */
-                        sd->bridge = BRIDGE_SN9C120;
-                        sd->sensor = SENSOR_MI0360;
-                        sd->i2c_base = 0x5d;
-/*                      break;
-                } */
-                break;
-        case 0x045e:
-/*              switch (product) {
-                case 0x00f5:
-                case 0x00f7: */
-                        sd->bridge = BRIDGE_SN9C105;
-                        sd->sensor = SENSOR_OV7660;
-                        sd->i2c_base = 0x21;
-/*                      break;
-                } */
-                break;
-        case 0x0471:                            /* Philips */
-/*              switch (product) {
-                case 0x0327:
-                case 0x0328:
-                case 0x0330: */
-                        sd->bridge = BRIDGE_SN9C105;
-                        sd->sensor = SENSOR_MI0360;
-                        sd->i2c_base = 0x5d;
-/*                      break;
-                } */
-                break;
-        case 0x0c45:                            /* Sonix */
-                switch (product) {
-                case 0x6040:
-                        sd->bridge = BRIDGE_SN9C102P;
-/*                      sd->sensor = SENSOR_MI0360;      * from BW600.inf */
-/*fixme: MI0360 base=5d ? */
-                        sd->sensor = SENSOR_HV7131R;    /* gspcav1 value */
-                        sd->i2c_base = 0x11;
-                        break;
-/*              case 0x607a:                            * from BW600.inf
-                        sd->bridge = BRIDGE_SN9C102P;
-                        sd->sensor = SENSOR_OV7648;
-                        sd->i2c_base = 0x??;
-                        break; */
-                case 0x607c:
-                        sd->bridge = BRIDGE_SN9C102P;
-                        sd->sensor = SENSOR_HV7131R;
-                        sd->i2c_base = 0x11;
-                        break;
-/*              case 0x607e:                            * from BW600.inf
-                        sd->bridge = BRIDGE_SN9C102P;
-                        sd->sensor = SENSOR_OV7630;
-                        sd->i2c_base = 0x??;
-                        break; */
-                case 0x60c0:
-                        sd->bridge = BRIDGE_SN9C105;
-                        sd->sensor = SENSOR_MI0360;
-                        sd->i2c_base = 0x5d;
-                        break;
-/*              case 0x60c8:                            * from BW600.inf
-                        sd->bridge = BRIDGE_SN9C105;
-                        sd->sensor = SENSOR_OM6801;
-                        sd->i2c_base = 0x??;
-                        break; */
-/*              case 0x60cc:                            * from BW600.inf
-                        sd->bridge = BRIDGE_SN9C105;
-                        sd->sensor = SENSOR_HV7131GP;
-                        sd->i2c_base = 0x??;
-                        break; */
-                case 0x60ec:
-                        sd->bridge = BRIDGE_SN9C105;
-                        sd->sensor = SENSOR_MO4000;
-                        sd->i2c_base = 0x21;
-                        break;
-/*              case 0x60ef:                            * from BW600.inf
-                        sd->bridge = BRIDGE_SN9C105;
-                        sd->sensor = SENSOR_ICM105C;
-                        sd->i2c_base = 0x??;
-                        break; */
-/*              case 0x60fa:                            * from BW600.inf
-                        sd->bridge = BRIDGE_SN9C105;
-                        sd->sensor = SENSOR_OV7648;
-                        sd->i2c_base = 0x??;
-                        break; */
-                case 0x60fb:
-                        sd->bridge = BRIDGE_SN9C105;
-                        sd->sensor = SENSOR_OV7660;
-                        sd->i2c_base = 0x21;
-                        break;
-                case 0x60fc:
-                        sd->bridge = BRIDGE_SN9C105;
-                        sd->sensor = SENSOR_HV7131R;
-                        sd->i2c_base = 0x11;
-                        break;
-/*              case 0x60fe:                            * from BW600.inf
-                        sd->bridge = BRIDGE_SN9C105;
-                        sd->sensor = SENSOR_OV7630;
-                        sd->i2c_base = 0x??;
-                        break; */
-/*              case 0x6108:                            * from BW600.inf
-                        sd->bridge = BRIDGE_SN9C120;
-                        sd->sensor = SENSOR_OM6801;
-                        sd->i2c_base = 0x??;
-                        break; */
-/*              case 0x6122:                            * from BW600.inf
-                        sd->bridge = BRIDGE_SN9C110;
-                        sd->sensor = SENSOR_ICM105C;
-                        sd->i2c_base = 0x??;
-                        break; */
-                case 0x612a:
-/*                      sd->bridge = BRIDGE_SN9C110;     * in BW600.inf */
-                        sd->bridge = BRIDGE_SN9C325;
-                        sd->sensor = SENSOR_OV7648;
-                        sd->i2c_base = 0x21;
-/*fixme: sensor_init has base = 00 et 6e!*/
-                        break;
-/*              case 0x6123:                            * from BW600.inf
-                        sd->bridge = BRIDGE_SN9C110;
-                        sd->sensor = SENSOR_SanyoCCD;
-                        sd->i2c_base = 0x??;
-                        break; */
-                case 0x612c:
-                        sd->bridge = BRIDGE_SN9C110;
-                        sd->sensor = SENSOR_MO4000;
-                        sd->i2c_base = 0x21;
-                        break;
-/*              case 0x612e:                            * from BW600.inf
-                        sd->bridge = BRIDGE_SN9C110;
-                        sd->sensor = SENSOR_OV7630;
-                        sd->i2c_base = 0x??;
-                        break; */
-/*              case 0x612f:                            * from BW600.inf
-                        sd->bridge = BRIDGE_SN9C110;
-                        sd->sensor = SENSOR_ICM105C;
-                        sd->i2c_base = 0x??;
-                        break; */
-                case 0x6130:
-                        sd->bridge = BRIDGE_SN9C120;
-                        sd->sensor = SENSOR_MI0360;
-                        sd->i2c_base = 0x5d;
-                        break;
-                case 0x6138:
-                        sd->bridge = BRIDGE_SN9C120;
-                        sd->sensor = SENSOR_MO4000;
-                        sd->i2c_base = 0x21;
-                        break;
-/*              case 0x613a:                            * from BW600.inf
-                        sd->bridge = BRIDGE_SN9C120;
-                        sd->sensor = SENSOR_OV7648;
-                        sd->i2c_base = 0x??;
-                        break; */
-                case 0x613b:
-                        sd->bridge = BRIDGE_SN9C120;
-                        sd->sensor = SENSOR_OV7660;
-                        sd->i2c_base = 0x21;
-                        break;
-                case 0x613c:
-                        sd->bridge = BRIDGE_SN9C120;
-                        sd->sensor = SENSOR_HV7131R;
-                        sd->i2c_base = 0x11;
-                        break;
-/*              case 0x613e:                            * from BW600.inf
-                        sd->bridge = BRIDGE_SN9C120;
-                        sd->sensor = SENSOR_OV7630;
-                        sd->i2c_base = 0x??;
-                        break; */
-                }
-                break;
-        }
-        if (sd->sensor < 0) {
-                PDEBUG(D_ERR, "Invalid vendor/product %04x:%04x",
-                        vendor, product);
-                return -EINVAL;
-        }
 
         cam = &gspca_dev->cam;
-        cam->dev_name = (char *) id->driver_info;
         cam->epaddr = 0x01;
         cam->cam_mode = vga_mode;
         cam->nmodes = ARRAY_SIZE(vga_mode);
 
+        sd->bridge = id->driver_info >> 16;
+        sd->sensor = id->driver_info >> 8;
+        sd->i2c_base = id->driver_info;
+
         sd->qindex = 4;                 /* set the quantization table */
         sd->brightness = BRIGHTNESS_DEF;
         sd->contrast = CONTRAST_DEF;
@@ -983,34 +818,26 @@ static int sd_open(struct gspca_dev *gspca_dev)
 {
         struct sd *sd = (struct sd *) gspca_dev;
 /*      const __u8 *sn9c1xx; */
-        __u8 regF1;
         __u8 regGpio[] = { 0x29, 0x74 };
+        __u8 regF1;
 
         /* setup a selector by bridge */
-        regF1 = 0x01;
-        reg_w(gspca_dev, 0xf1, &regF1, 1);
+        reg_w1(gspca_dev, 0xf1, 0x01);
         reg_r(gspca_dev, 0x00, 1);              /* -> regF1 = 0x00 */
-        regF1 = gspca_dev->usb_buf[0];
-        reg_w(gspca_dev, 0xf1, &regF1, 1);
+        reg_w1(gspca_dev, 0xf1, gspca_dev->usb_buf[0]);
         reg_r(gspca_dev, 0x00, 1);
         regF1 = gspca_dev->usb_buf[0];
         switch (sd->bridge) {
         case BRIDGE_SN9C102P:
                 if (regF1 != 0x11)
                         return -ENODEV;
-                reg_w(gspca_dev, 0x02, &regGpio[1], 1);
+                reg_w1(gspca_dev, 0x02, regGpio[1]);
                 break;
         case BRIDGE_SN9C105:
                 if (regF1 != 0x11)
                         return -ENODEV;
                 reg_w(gspca_dev, 0x02, regGpio, 2);
                 break;
-        case BRIDGE_SN9C110:
-                if (regF1 != 0x12)
-                        return -ENODEV;
-                regGpio[1] = 0x62;
-                reg_w(gspca_dev, 0x02, &regGpio[1], 1);
-                break;
         case BRIDGE_SN9C120:
                 if (regF1 != 0x12)
                         return -ENODEV;
@@ -1018,16 +845,15 @@ static int sd_open(struct gspca_dev *gspca_dev)
                 reg_w(gspca_dev, 0x02, regGpio, 2);
                 break;
         default:
+/*      case BRIDGE_SN9C110: */
 /*      case BRIDGE_SN9C325: */
                 if (regF1 != 0x12)
                         return -ENODEV;
-                regGpio[1] = 0x62;
-                reg_w(gspca_dev, 0x02, &regGpio[1], 1);
+                reg_w1(gspca_dev, 0x02, 0x62);
                 break;
         }
 
-        regF1 = 0x01;
-        reg_w(gspca_dev, 0xf1, &regF1, 1);
+        reg_w1(gspca_dev, 0xf1, 0x01);
 
         return 0;
 }
@@ -1123,7 +949,7 @@ static void setbrightness(struct gspca_dev *gspca_dev)
         }
 
         k2 = sd->brightness >> 10;
-        reg_w(gspca_dev, 0x96, &k2, 1);
+        reg_w1(gspca_dev, 0x96, k2);
 }
 
 static void setcontrast(struct gspca_dev *gspca_dev)
@@ -1152,7 +978,7 @@ static void setcolors(struct gspca_dev *gspca_dev)
                 data = (colour + 32) & 0x7f;    /* blue */
         else
                 data = (-colour + 32) & 0x7f;   /* red */
-        reg_w(gspca_dev, 0x05, &data, 1);
+        reg_w1(gspca_dev, 0x05, data);
 }
 
 /* -- start the camera -- */
@@ -1165,7 +991,6 @@ static void sd_start(struct gspca_dev *gspca_dev)
         __u8 reg17;
         const __u8 *sn9c1xx;
         int mode;
-        static const __u8 DC29[] = { 0x6a, 0x50, 0x00, 0x00, 0x50, 0x3c };
         static const __u8 C0[] = { 0x2d, 0x2d, 0x3a, 0x05, 0x04, 0x3f };
         static const __u8 CA[] = { 0x28, 0xd8, 0x14, 0xec };
         static const __u8 CA_sn9c120[] =
@@ -1179,21 +1004,20 @@ static void sd_start(struct gspca_dev *gspca_dev)
 
 /*fixme:jfm this sequence should appear at end of sd_start */
 /* with
-        data = 0x44;
-        reg_w(gspca_dev, 0x01, &data, 1); */
-        reg_w(gspca_dev, 0x15, &sn9c1xx[0x15], 1);
-        reg_w(gspca_dev, 0x16, &sn9c1xx[0x16], 1);
-        reg_w(gspca_dev, 0x12, &sn9c1xx[0x12], 1);
-        reg_w(gspca_dev, 0x13, &sn9c1xx[0x13], 1);
-        reg_w(gspca_dev, 0x18, &sn9c1xx[0x18], 1);
-        reg_w(gspca_dev, 0xd2, &DC29[0], 1);
-        reg_w(gspca_dev, 0xd3, &DC29[1], 1);
-        reg_w(gspca_dev, 0xc6, &DC29[2], 1);
-        reg_w(gspca_dev, 0xc7, &DC29[3], 1);
-        reg_w(gspca_dev, 0xc8, &DC29[4], 1);
-        reg_w(gspca_dev, 0xc9, &DC29[5], 1);
+        reg_w1(gspca_dev, 0x01, 0x44); */
+        reg_w1(gspca_dev, 0x15, sn9c1xx[0x15]);
+        reg_w1(gspca_dev, 0x16, sn9c1xx[0x16]);
+        reg_w1(gspca_dev, 0x12, sn9c1xx[0x12]);
+        reg_w1(gspca_dev, 0x13, sn9c1xx[0x13]);
+        reg_w1(gspca_dev, 0x18, sn9c1xx[0x18]);
+        reg_w1(gspca_dev, 0xd2, 0x6a);          /* DC29 */
+        reg_w1(gspca_dev, 0xd3, 0x50);
+        reg_w1(gspca_dev, 0xc6, 0x00);
+        reg_w1(gspca_dev, 0xc7, 0x00);
+        reg_w1(gspca_dev, 0xc8, 0x50);
+        reg_w1(gspca_dev, 0xc9, 0x3c);
 /*fixme:jfm end of ending sequence */
-        reg_w(gspca_dev, 0x18, &sn9c1xx[0x18], 1);
+        reg_w1(gspca_dev, 0x18, sn9c1xx[0x18]);
         switch (sd->bridge) {
         case BRIDGE_SN9C325:
                 data = 0xae;
@@ -1205,11 +1029,11 @@ static void sd_start(struct gspca_dev *gspca_dev)
                 data = 0x60;
                 break;
         }
-        reg_w(gspca_dev, 0x17, &data, 1);
-        reg_w(gspca_dev, 0x05, &sn9c1xx[5], 1);
-        reg_w(gspca_dev, 0x07, &sn9c1xx[7], 1);
-        reg_w(gspca_dev, 0x06, &sn9c1xx[6], 1);
-        reg_w(gspca_dev, 0x14, &sn9c1xx[0x14], 1);
+        reg_w1(gspca_dev, 0x17, data);
+        reg_w1(gspca_dev, 0x05, sn9c1xx[5]);
+        reg_w1(gspca_dev, 0x07, sn9c1xx[7]);
+        reg_w1(gspca_dev, 0x06, sn9c1xx[6]);
+        reg_w1(gspca_dev, 0x14, sn9c1xx[0x14]);
         switch (sd->bridge) {
         case BRIDGE_SN9C325:
                 reg_w(gspca_dev, 0x20, regsn20_sn9c325,
@@ -1217,10 +1041,8 @@ static void sd_start(struct gspca_dev *gspca_dev)
                 for (i = 0; i < 8; i++)
                         reg_w(gspca_dev, 0x84, reg84_sn9c325,
                                         sizeof reg84_sn9c325);
-                data = 0x0a;
-                reg_w(gspca_dev, 0x9a, &data, 1);
-                data = 0x60;
-                reg_w(gspca_dev, 0x99, &data, 1);
+                reg_w1(gspca_dev, 0x9a, 0x0a);
+                reg_w1(gspca_dev, 0x99, 0x60);
                 break;
         case BRIDGE_SN9C120:
                 reg_w(gspca_dev, 0x20, regsn20_sn9c120,
@@ -1233,39 +1055,30 @@ static void sd_start(struct gspca_dev *gspca_dev)
                                         sizeof reg84_sn9c120_2);
                 reg_w(gspca_dev, 0x84, reg84_sn9c120_3,
                                 sizeof reg84_sn9c120_3);
-                data = 0x05;
-                reg_w(gspca_dev, 0x9a, &data, 1);
-                data = 0x5b;
-                reg_w(gspca_dev, 0x99, &data, 1);
+                reg_w1(gspca_dev, 0x9a, 0x05);
+                reg_w1(gspca_dev, 0x99, 0x5b);
                 break;
         default:
                 reg_w(gspca_dev, 0x20, regsn20, sizeof regsn20);
                 for (i = 0; i < 8; i++)
                         reg_w(gspca_dev, 0x84, reg84, sizeof reg84);
-                data = 0x08;
-                reg_w(gspca_dev, 0x9a, &data, 1);
-                data = 0x59;
-                reg_w(gspca_dev, 0x99, &data, 1);
+                reg_w1(gspca_dev, 0x9a, 0x08);
+                reg_w1(gspca_dev, 0x99, 0x59);
                 break;
         }
 
         mode = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv;
-        reg1 = 0x02;
+        if (mode)
+                reg1 = 0x46;    /* 320 clk 48Mhz */
+        else
+                reg1 = 0x06;    /* 640 clk 24Mz */
         reg17 = 0x61;
         switch (sd->sensor) {
         case SENSOR_HV7131R:
                 hv7131R_InitSensor(gspca_dev);
-                if (mode)
-                        reg1 = 0x46;    /* 320 clk 48Mhz */
-                else
-                        reg1 = 0x06;    /* 640 clk 24Mz */
                 break;
         case SENSOR_MI0360:
                 mi0360_InitSensor(gspca_dev);
-                if (mode)
-                        reg1 = 0x46;    /* 320 clk 48Mhz */
-                else
-                        reg1 = 0x06;    /* 640 clk 24Mz */
                 break;
         case SENSOR_MO4000:
                 mo4000_InitSensor(gspca_dev);
@@ -1274,13 +1087,13 @@ static void sd_start(struct gspca_dev *gspca_dev)
                         reg1 = 0x06;    /* clk 24Mz */
                 } else {
                         reg17 = 0x22;   /* 640 MCKSIZE */
-                        reg1 = 0x06;    /* 640 clk 24Mz */
+/*                      reg1 = 0x06;     * 640 clk 24Mz (done) */
                 }
                 break;
         case SENSOR_OV7648:
+                ov7648_InitSensor(gspca_dev);
                 reg17 = 0xa2;
                 reg1 = 0x44;
-                ov7648_InitSensor(gspca_dev);
 /*              if (mode)
                         ;                * 320x2...
                 else
@@ -1292,7 +1105,7 @@ static void sd_start(struct gspca_dev *gspca_dev)
                 if (mode) {
 /*                      reg17 = 0x21;    * 320 */
 /*                      reg1 = 0x44; */
-                        reg1 = 0x46;
+/*                      reg1 = 0x46;    (done) */
                 } else {
                         reg17 = 0xa2;   /* 640 */
                         reg1 = 0x40;
@@ -1321,16 +1134,16 @@ static void sd_start(struct gspca_dev *gspca_dev)
 
         /* here change size mode 0 -> VGA; 1 -> CIF */
         data = 0x40 | sn9c1xx[0x18] | (mode << 4);
-        reg_w(gspca_dev, 0x18, &data, 1);
+        reg_w1(gspca_dev, 0x18, data);
 
         reg_w(gspca_dev, 0x100, qtable4, 0x40);
         reg_w(gspca_dev, 0x140, qtable4 + 0x40, 0x40);
 
         data = sn9c1xx[0x18] | (mode << 4);
-        reg_w(gspca_dev, 0x18, &data, 1);
+        reg_w1(gspca_dev, 0x18, data);
 
-        reg_w(gspca_dev, 0x17, &reg17, 1);
-        reg_w(gspca_dev, 0x01, &reg1, 1);
+        reg_w1(gspca_dev, 0x17, reg17);
+        reg_w1(gspca_dev, 0x01, reg1);
         setbrightness(gspca_dev);
         setcontrast(gspca_dev);
 }
@@ -1342,7 +1155,6 @@ static void sd_stopN(struct gspca_dev *gspca_dev)
                 { 0xa1, 0x11, 0x02, 0x09, 0x00, 0x00, 0x00, 0x10 };
         static const __u8 stopmi0360[] =
                 { 0xb1, 0x5d, 0x07, 0x00, 0x00, 0x00, 0x00, 0x10 };
-        __u8 regF1;
         __u8 data;
         const __u8 *sn9c1xx;
 
@@ -1366,12 +1178,11 @@ static void sd_stopN(struct gspca_dev *gspca_dev)
                 break;
         }
         sn9c1xx = sn_tb[(int) sd->sensor];
-        reg_w(gspca_dev, 0x01, &sn9c1xx[1], 1);
-        reg_w(gspca_dev, 0x17, &sn9c1xx[0x17], 1);
-        reg_w(gspca_dev, 0x01, &sn9c1xx[1], 1);
-        reg_w(gspca_dev, 0x01, &data, 1);
-        regF1 = 0x01;
-        reg_w(gspca_dev, 0xf1, &regF1, 1);
+        reg_w1(gspca_dev, 0x01, sn9c1xx[1]);
+        reg_w1(gspca_dev, 0x17, sn9c1xx[0x17]);
+        reg_w1(gspca_dev, 0x01, sn9c1xx[1]);
+        reg_w1(gspca_dev, 0x01, data);
+        reg_w1(gspca_dev, 0xf1, 0x01);
 }
 
 static void sd_stop0(struct gspca_dev *gspca_dev)
@@ -1610,30 +1421,53 @@ static const struct sd_desc sd_desc = {
 };
 
 /* -- module initialisation -- */
-#define DVNM(name) .driver_info = (kernel_ulong_t) name
+#define BSI(bridge, sensor, i2c_addr) \
+        .driver_info = (BRIDGE_ ## bridge << 16) \
+                        | (SENSOR_ ## sensor << 8) \
+                        | (i2c_addr)
 static const __devinitdata struct usb_device_id device_table[] = {
 #ifndef CONFIG_USB_SN9C102
-        {USB_DEVICE(0x0458, 0x7025), DVNM("Genius Eye 311Q")},
-        {USB_DEVICE(0x045e, 0x00f5), DVNM("MicroSoft VX3000")},
-        {USB_DEVICE(0x045e, 0x00f7), DVNM("MicroSoft VX1000")},
-        {USB_DEVICE(0x0471, 0x0327), DVNM("Philips SPC 600 NC")},
-        {USB_DEVICE(0x0471, 0x0328), DVNM("Philips SPC 700 NC")},
+        {USB_DEVICE(0x0458, 0x7025), BSI(SN9C120, MI0360, 0x5d)},
+        {USB_DEVICE(0x045e, 0x00f5), BSI(SN9C105, OV7660, 0x21)},
+        {USB_DEVICE(0x045e, 0x00f7), BSI(SN9C105, OV7660, 0x21)},
+        {USB_DEVICE(0x0471, 0x0327), BSI(SN9C105, MI0360, 0x5d)},
+        {USB_DEVICE(0x0471, 0x0328), BSI(SN9C105, MI0360, 0x5d)},
 #endif
-        {USB_DEVICE(0x0471, 0x0330), DVNM("Philips SPC 710NC")},
-        {USB_DEVICE(0x0c45, 0x6040), DVNM("Speed NVC 350K")},
-        {USB_DEVICE(0x0c45, 0x607c), DVNM("Sonix sn9c102p Hv7131R")},
-        {USB_DEVICE(0x0c45, 0x60c0), DVNM("Sangha Sn535")},
-        {USB_DEVICE(0x0c45, 0x60ec), DVNM("SN9C105+MO4000")},
-        {USB_DEVICE(0x0c45, 0x60fb), DVNM("Surfer NoName")},
-        {USB_DEVICE(0x0c45, 0x60fc), DVNM("LG-LIC300")},
-        {USB_DEVICE(0x0c45, 0x612a), DVNM("Avant Camera")},
-        {USB_DEVICE(0x0c45, 0x612c), DVNM("Typhoon Rasy Cam 1.3MPix")},
+        {USB_DEVICE(0x0471, 0x0330), BSI(SN9C105, MI0360, 0x5d)},
+        {USB_DEVICE(0x0c45, 0x6040), BSI(SN9C102P, HV7131R, 0x11)},
+/* bw600.inf:
+        {USB_DEVICE(0x0c45, 0x6040), BSI(SN9C102P, MI0360, 0x5d)}, */
+/*      {USB_DEVICE(0x0c45, 0x603a), BSI(SN9C102P, OV7648, 0x??)}, */
+/*      {USB_DEVICE(0x0c45, 0x607a), BSI(SN9C102P, OV7648, 0x??)}, */
+        {USB_DEVICE(0x0c45, 0x607c), BSI(SN9C102P, HV7131R, 0x11)},
+/*      {USB_DEVICE(0x0c45, 0x607e), BSI(SN9C102P, OV7630, 0x??)}, */
+        {USB_DEVICE(0x0c45, 0x60c0), BSI(SN9C105, MI0360, 0x5d)},
+/*      {USB_DEVICE(0x0c45, 0x60c8), BSI(SN9C105, OM6801, 0x??)}, */
+/*      {USB_DEVICE(0x0c45, 0x60cc), BSI(SN9C105, HV7131GP, 0x??)}, */
+        {USB_DEVICE(0x0c45, 0x60ec), BSI(SN9C105, MO4000, 0x21)},
+/*      {USB_DEVICE(0x0c45, 0x60ef), BSI(SN9C105, ICM105C, 0x??)}, */
+/*      {USB_DEVICE(0x0c45, 0x60fa), BSI(SN9C105, OV7648, 0x??)}, */
+        {USB_DEVICE(0x0c45, 0x60fb), BSI(SN9C105, OV7660, 0x21)},
+        {USB_DEVICE(0x0c45, 0x60fc), BSI(SN9C105, HV7131R, 0x11)},
+/*      {USB_DEVICE(0x0c45, 0x60fe), BSI(SN9C105, OV7630, 0x??)}, */
+/*      {USB_DEVICE(0x0c45, 0x6108), BSI(SN9C120, OM6801, 0x??)}, */
+/*      {USB_DEVICE(0x0c45, 0x6122), BSI(SN9C110, ICM105C, 0x??)}, */
+/*      {USB_DEVICE(0x0c45, 0x6123), BSI(SN9C110, SanyoCCD, 0x??)}, */
+        {USB_DEVICE(0x0c45, 0x612a), BSI(SN9C325, OV7648, 0x21)},
+/* bw600.inf:
+        {USB_DEVICE(0x0c45, 0x612a), BSI(SN9C110, OV7648, 0x21)}, */
+        {USB_DEVICE(0x0c45, 0x612c), BSI(SN9C110, MO4000, 0x21)},
+/*      {USB_DEVICE(0x0c45, 0x612e), BSI(SN9C110, OV7630, 0x??)}, */
+/*      {USB_DEVICE(0x0c45, 0x612f), BSI(SN9C110, ICM105C, 0x??)}, */
 #ifndef CONFIG_USB_SN9C102
-        {USB_DEVICE(0x0c45, 0x6130), DVNM("Sonix Pccam")},
-        {USB_DEVICE(0x0c45, 0x6138), DVNM("Sn9c120 Mo4000")},
-        {USB_DEVICE(0x0c45, 0x613b), DVNM("Surfer SN-206")},
-        {USB_DEVICE(0x0c45, 0x613c), DVNM("Sonix Pccam168")},
+        {USB_DEVICE(0x0c45, 0x6130), BSI(SN9C120, MI0360, 0x5d)},
+        {USB_DEVICE(0x0c45, 0x6138), BSI(SN9C120, MO4000, 0x21)},
+/*      {USB_DEVICE(0x0c45, 0x613a), BSI(SN9C120, OV7648, 0x??)}, */
+        {USB_DEVICE(0x0c45, 0x613b), BSI(SN9C120, OV7660, 0x21)},
+        {USB_DEVICE(0x0c45, 0x613c), BSI(SN9C120, HV7131R, 0x11)},
+/*      {USB_DEVICE(0x0c45, 0x613e), BSI(SN9C120, OV7630, 0x??)}, */
 #endif
+        {USB_DEVICE(0x0c45, 0x6143), BSI(SN9C120, MI0360, 0x5d)},
         {}
 };
 MODULE_DEVICE_TABLE(usb, device_table);
@@ -1658,7 +1492,7 @@ static int __init sd_mod_init(void)
 {
         if (usb_register(&sd_driver) < 0)
                 return -1;
-        info("v%s registered", version);
+        info("registered");
         return 0;
 }
 static void __exit sd_mod_exit(void)
diff --git a/drivers/media/video/gspca/spca500.c b/drivers/media/video/gspca/spca500.c
index 156206118795..17fe2c2a440d 100644
--- a/drivers/media/video/gspca/spca500.c
+++ b/drivers/media/video/gspca/spca500.c
@@ -24,9 +24,6 @@
 #include "gspca.h"
 #include "jpeg.h"
 
-#define DRIVER_VERSION_NUMBER   KERNEL_VERSION(2, 1, 7)
-static const char version[] = "2.1.7";
-
 MODULE_AUTHOR("Michel Xhaard <mxhaard@users.sourceforge.net>");
 MODULE_DESCRIPTION("GSPCA/SPCA500 USB Camera Driver");
 MODULE_LICENSE("GPL");
@@ -630,109 +627,10 @@ static int sd_config(struct gspca_dev *gspca_dev,
 {
         struct sd *sd = (struct sd *) gspca_dev;
         struct cam *cam;
-        __u16 vendor;
-        __u16 product;
-
-        vendor = id->idVendor;
-        product = id->idProduct;
-        switch (vendor) {
-        case 0x040a:            /* Kodak cameras */
-/*              switch (product) { */
-/*              case 0x0300: */
-                        sd->subtype = KodakEZ200;
-/*                      break; */
-/*              } */
-                break;
-        case 0x041e:            /* Creative cameras */
-/*              switch (product) { */
-/*              case 0x400a: */
-                        sd->subtype = CreativePCCam300;
-/*                      break; */
-/*              } */
-                break;
-        case 0x046d:            /* Logitech Labtec */
-                switch (product) {
-                case 0x0890:
-                        sd->subtype = LogitechTraveler;
-                        break;
-                case 0x0900:
-                        sd->subtype = LogitechClickSmart310;
-                        break;
-                case 0x0901:
-                        sd->subtype = LogitechClickSmart510;
-                        break;
-                }
-                break;
-        case 0x04a5:            /* Benq */
-/*              switch (product) { */
-/*              case 0x300c: */
-                        sd->subtype = BenqDC1016;
-/*                      break; */
-/*              } */
-                break;
-        case 0x04fc:            /* SunPlus */
-/*              switch (product) { */
-/*              case 0x7333: */
-                        sd->subtype = PalmPixDC85;
-/*                      break; */
-/*              } */
-                break;
-        case 0x055f:            /* Mustek cameras */
-                switch (product) {
-                case 0xc200:
-                        sd->subtype = MustekGsmart300;
-                        break;
-                case 0xc220:
-                        sd->subtype = Gsmartmini;
-                        break;
-                }
-                break;
-        case 0x06bd:            /* Agfa Cl20 */
-/*              switch (product) { */
-/*              case 0x0404: */
-                        sd->subtype = AgfaCl20;
-/*                      break; */
-/*              } */
-                break;
-        case 0x06be:            /* Optimedia */
-/*              switch (product) { */
-/*              case 0x0800: */
-                        sd->subtype = Optimedia;
-/*                      break; */
-/*              } */
-                break;
-        case 0x084d:            /* D-Link / Minton */
-/*              switch (product) { */
-/*              case 0x0003:     * DSC-350 / S-Cam F5 */
-                        sd->subtype = DLinkDSC350;
-/*                      break; */
-/*              } */
-                break;
-        case 0x08ca:            /* Aiptek */
-/*              switch (product) { */
-/*              case 0x0103: */
-                        sd->subtype = AiptekPocketDV;
-/*                      break; */
-/*              } */
-                break;
-        case 0x2899:            /* ToptroIndustrial */
-/*              switch (product) { */
-/*              case 0x012c: */
-                        sd->subtype = ToptroIndus;
-/*                      break; */
-/*              } */
-                break;
-        case 0x8086:            /* Intel */
-/*              switch (product) { */
-/*              case 0x0630:     * Pocket PC Camera */
-                        sd->subtype = IntelPocketPCCamera;
-/*                      break; */
-/*              } */
-                break;
-        }
+
         cam = &gspca_dev->cam;
-        cam->dev_name = (char *) id->driver_info;
         cam->epaddr = 0x01;
+        sd->subtype = id->driver_info;
         if (sd->subtype != LogitechClickSmart310) {
                 cam->cam_mode = vga_mode;
                 cam->nmodes = sizeof vga_mode / sizeof vga_mode[0];
@@ -1162,23 +1060,22 @@ static struct sd_desc sd_desc = {
 };
 
 /* -- module initialisation -- */
-#define DVNM(name) .driver_info = (kernel_ulong_t) name
 static const __devinitdata struct usb_device_id device_table[] = {
-        {USB_DEVICE(0x040a, 0x0300), DVNM("Kodak EZ200")},
-        {USB_DEVICE(0x041e, 0x400a), DVNM("Creative PC-CAM 300")},
-        {USB_DEVICE(0x046d, 0x0890), DVNM("Logitech QuickCam traveler")},
-        {USB_DEVICE(0x046d, 0x0900), DVNM("Logitech Inc. ClickSmart 310")},
-        {USB_DEVICE(0x046d, 0x0901), DVNM("Logitech Inc. ClickSmart 510")},
-        {USB_DEVICE(0x04a5, 0x300c), DVNM("Benq DC1016")},
-        {USB_DEVICE(0x04fc, 0x7333), DVNM("PalmPixDC85")},
-        {USB_DEVICE(0x055f, 0xc200), DVNM("Mustek Gsmart 300")},
-        {USB_DEVICE(0x055f, 0xc220), DVNM("Gsmart Mini")},
-        {USB_DEVICE(0x06bd, 0x0404), DVNM("Agfa CL20")},
-        {USB_DEVICE(0x06be, 0x0800), DVNM("Optimedia")},
-        {USB_DEVICE(0x084d, 0x0003), DVNM("D-Link DSC-350")},
-        {USB_DEVICE(0x08ca, 0x0103), DVNM("Aiptek PocketDV")},
-        {USB_DEVICE(0x2899, 0x012c), DVNM("Toptro Industrial")},
-        {USB_DEVICE(0x8086, 0x0630), DVNM("Intel Pocket PC Camera")},
+        {USB_DEVICE(0x040a, 0x0300), .driver_info = KodakEZ200},
+        {USB_DEVICE(0x041e, 0x400a), .driver_info = CreativePCCam300},
+        {USB_DEVICE(0x046d, 0x0890), .driver_info = LogitechTraveler},
+        {USB_DEVICE(0x046d, 0x0900), .driver_info = LogitechClickSmart310},
+        {USB_DEVICE(0x046d, 0x0901), .driver_info = LogitechClickSmart510},
+        {USB_DEVICE(0x04a5, 0x300c), .driver_info = BenqDC1016},
+        {USB_DEVICE(0x04fc, 0x7333), .driver_info = PalmPixDC85},
+        {USB_DEVICE(0x055f, 0xc200), .driver_info = MustekGsmart300},
+        {USB_DEVICE(0x055f, 0xc220), .driver_info = Gsmartmini},
+        {USB_DEVICE(0x06bd, 0x0404), .driver_info = AgfaCl20},
+        {USB_DEVICE(0x06be, 0x0800), .driver_info = Optimedia},
+        {USB_DEVICE(0x084d, 0x0003), .driver_info = DLinkDSC350},
+        {USB_DEVICE(0x08ca, 0x0103), .driver_info = AiptekPocketDV},
+        {USB_DEVICE(0x2899, 0x012c), .driver_info = ToptroIndus},
+        {USB_DEVICE(0x8086, 0x0630), .driver_info = IntelPocketPCCamera},
         {}
 };
 MODULE_DEVICE_TABLE(usb, device_table);
@@ -1203,7 +1100,7 @@ static int __init sd_mod_init(void)
 {
         if (usb_register(&sd_driver) < 0)
                 return -1;
-        PDEBUG(D_PROBE, "v%s registered", version);
+        PDEBUG(D_PROBE, "registered");
         return 0;
 }
 static void __exit sd_mod_exit(void)
diff --git a/drivers/media/video/gspca/spca501.c b/drivers/media/video/gspca/spca501.c
index 50e929de0203..51a3c3429ef0 100644
--- a/drivers/media/video/gspca/spca501.c
+++ b/drivers/media/video/gspca/spca501.c
@@ -23,9 +23,6 @@
 
 #include "gspca.h"
 
-#define DRIVER_VERSION_NUMBER   KERNEL_VERSION(2, 1, 7)
-static const char version[] = "2.1.7";
-
 MODULE_AUTHOR("Michel Xhaard <mxhaard@users.sourceforge.net>");
 MODULE_DESCRIPTION("GSPCA/SPCA501 USB Camera Driver");
 MODULE_LICENSE("GPL");
@@ -1923,63 +1920,12 @@ static int sd_config(struct gspca_dev *gspca_dev,
 {
         struct sd *sd = (struct sd *) gspca_dev;
         struct cam *cam;
-        __u16 vendor;
-        __u16 product;
-
-        vendor = id->idVendor;
-        product = id->idProduct;
-        switch (vendor) {
-        case 0x0000:            /* Unknow Camera */
-/*              switch (product) { */
-/*              case 0x0000: */
-                        sd->subtype = MystFromOriUnknownCamera;
-/*                      break; */
-/*              } */
-                break;
-        case 0x040a:            /* Kodak cameras */
-/*              switch (product) { */
-/*              case 0x0002: */
-                        sd->subtype = KodakDVC325;
-/*                      break; */
-/*              } */
-                break;
-        case 0x0497:            /* Smile International */
-/*              switch (product) { */
-/*              case 0xc001: */
-                        sd->subtype = SmileIntlCamera;
-/*                      break; */
-/*              } */
-                break;
-        case 0x0506:            /* 3COM cameras */
-/*              switch (product) { */
-/*              case 0x00df: */
-                        sd->subtype = ThreeComHomeConnectLite;
-/*                      break; */
-/*              } */
-                break;
-        case 0x0733:    /* Rebadged ViewQuest (Intel) and ViewQuest cameras */
-                switch (product) {
-                case 0x0401:
-                        sd->subtype = IntelCreateAndShare;
-                        break;
-                case 0x0402:
-                        sd->subtype = ViewQuestM318B;
-                        break;
-                }
-                break;
-        case 0x1776:            /* Arowana */
-/*              switch (product) { */
-/*              case 0x501c: */
-                        sd->subtype = Arowana300KCMOSCamera;
-/*                      break; */
-/*              } */
-                break;
-        }
+
         cam = &gspca_dev->cam;
-        cam->dev_name = (char *) id->driver_info;
         cam->epaddr = 0x01;
         cam->cam_mode = vga_mode;
         cam->nmodes = sizeof vga_mode / sizeof vga_mode[0];
+        sd->subtype = id->driver_info;
         sd->brightness = sd_ctrls[MY_BRIGHTNESS].qctrl.default_value;
         sd->contrast = sd_ctrls[MY_CONTRAST].qctrl.default_value;
         sd->colors = sd_ctrls[MY_COLOR].qctrl.default_value;
@@ -2183,15 +2129,14 @@ static const struct sd_desc sd_desc = {
 };
 
 /* -- module initialisation -- */
-#define DVNM(name) .driver_info = (kernel_ulong_t) name
 static const __devinitdata struct usb_device_id device_table[] = {
-        {USB_DEVICE(0x040a, 0x0002), DVNM("Kodak DVC-325")},
-        {USB_DEVICE(0x0497, 0xc001), DVNM("Smile International")},
-        {USB_DEVICE(0x0506, 0x00df), DVNM("3Com HomeConnect Lite")},
-        {USB_DEVICE(0x0733, 0x0401), DVNM("Intel Create and Share")},
-        {USB_DEVICE(0x0733, 0x0402), DVNM("ViewQuest M318B")},
-        {USB_DEVICE(0x1776, 0x501c), DVNM("Arowana 300K CMOS Camera")},
-        {USB_DEVICE(0x0000, 0x0000), DVNM("MystFromOri Unknow Camera")},
+        {USB_DEVICE(0x040a, 0x0002), .driver_info = KodakDVC325},
+        {USB_DEVICE(0x0497, 0xc001), .driver_info = SmileIntlCamera},
+        {USB_DEVICE(0x0506, 0x00df), .driver_info = ThreeComHomeConnectLite},
+        {USB_DEVICE(0x0733, 0x0401), .driver_info = IntelCreateAndShare},
+        {USB_DEVICE(0x0733, 0x0402), .driver_info = ViewQuestM318B},
+        {USB_DEVICE(0x1776, 0x501c), .driver_info = Arowana300KCMOSCamera},
+        {USB_DEVICE(0x0000, 0x0000), .driver_info = MystFromOriUnknownCamera},
         {}
 };
 MODULE_DEVICE_TABLE(usb, device_table);
@@ -2216,7 +2161,7 @@ static int __init sd_mod_init(void)
 {
         if (usb_register(&sd_driver) < 0)
                 return -1;
-        PDEBUG(D_PROBE, "v%s registered", version);
+        PDEBUG(D_PROBE, "registered");
         return 0;
 }
 static void __exit sd_mod_exit(void)
diff --git a/drivers/media/video/gspca/spca505.c b/drivers/media/video/gspca/spca505.c
index ddea6e140aa8..3c2be80cbd65 100644
--- a/drivers/media/video/gspca/spca505.c
+++ b/drivers/media/video/gspca/spca505.c
@@ -23,9 +23,6 @@
 
 #include "gspca.h"
 
-#define DRIVER_VERSION_NUMBER   KERNEL_VERSION(2, 1, 7)
-static const char version[] = "2.1.7";
-
 MODULE_AUTHOR("Michel Xhaard <mxhaard@users.sourceforge.net>");
 MODULE_DESCRIPTION("GSPCA/SPCA505 USB Camera Driver");
 MODULE_LICENSE("GPL");
@@ -34,10 +31,6 @@ MODULE_LICENSE("GPL");
 struct sd {
         struct gspca_dev gspca_dev;             /* !! must be the first item */
 
-        int buflen;
-        unsigned char tmpbuf[640 * 480 * 3 / 2]; /* YYUV per line */
-        unsigned char tmpbuf2[640 * 480 * 2];   /* YUYV */
-
         unsigned char brightness;
 
         char subtype;
@@ -67,29 +60,29 @@ static struct ctrl sd_ctrls[] = {
 };
 
 static struct v4l2_pix_format vga_mode[] = {
-        {160, 120, V4L2_PIX_FMT_YUYV, V4L2_FIELD_NONE,
-                .bytesperline = 160 * 2,
-                .sizeimage = 160 * 120 * 2,
+        {160, 120, V4L2_PIX_FMT_SPCA505, V4L2_FIELD_NONE,
+                .bytesperline = 160 * 3,
+                .sizeimage = 160 * 120 * 3 / 2,
                 .colorspace = V4L2_COLORSPACE_SRGB,
                 .priv = 5},
-        {176, 144, V4L2_PIX_FMT_YUYV, V4L2_FIELD_NONE,
-                .bytesperline = 176 * 2,
-                .sizeimage = 176 * 144 * 2,
+        {176, 144, V4L2_PIX_FMT_SPCA505, V4L2_FIELD_NONE,
+                .bytesperline = 176 * 3,
+                .sizeimage = 176 * 144 * 3 / 2,
                 .colorspace = V4L2_COLORSPACE_SRGB,
                 .priv = 4},
-        {320, 240, V4L2_PIX_FMT_YUYV, V4L2_FIELD_NONE,
-                .bytesperline = 320 * 2,
-                .sizeimage = 320 * 240 * 2,
+        {320, 240, V4L2_PIX_FMT_SPCA505, V4L2_FIELD_NONE,
+                .bytesperline = 320 * 3,
+                .sizeimage = 320 * 240 * 3 / 2,
                 .colorspace = V4L2_COLORSPACE_SRGB,
                 .priv = 2},
-        {352, 288, V4L2_PIX_FMT_YUYV, V4L2_FIELD_NONE,
-                .bytesperline = 352 * 2,
-                .sizeimage = 352 * 288 * 2,
+        {352, 288, V4L2_PIX_FMT_SPCA505, V4L2_FIELD_NONE,
+                .bytesperline = 352 * 3,
+                .sizeimage = 352 * 288 * 3 / 2,
                 .colorspace = V4L2_COLORSPACE_SRGB,
                 .priv = 1},
-        {640, 480, V4L2_PIX_FMT_YUYV, V4L2_FIELD_NONE,
-                .bytesperline = 640 * 2,
-                .sizeimage = 640 * 480 * 2,
+        {640, 480, V4L2_PIX_FMT_SPCA505, V4L2_FIELD_NONE,
+                .bytesperline = 640 * 3,
+                .sizeimage = 640 * 480 * 3 / 2,
                 .colorspace = V4L2_COLORSPACE_SRGB,
                 .priv = 0},
 };
@@ -641,33 +634,11 @@ static int sd_config(struct gspca_dev *gspca_dev,
 {
         struct sd *sd = (struct sd *) gspca_dev;
         struct cam *cam;
-        __u16 vendor;
-        __u16 product;
-
-        vendor = id->idVendor;
-        product = id->idProduct;
-        switch (vendor) {
-        case 0x041e:            /* Creative cameras */
-/*              switch (product) { */
-/*              case 0x401d:     * here505b */
-                        sd->subtype = Nxultra;
-/*                      break; */
-/*              } */
-                break;
-        case 0x0733:    /* Rebadged ViewQuest (Intel) and ViewQuest cameras */
-/*              switch (product) { */
-/*              case 0x0430: */
-/*              fixme: may be UsbGrabberPV321 BRIDGE_SPCA506 SENSOR_SAA7113 */
-                        sd->subtype = IntelPCCameraPro;
-/*                      break; */
-/*              } */
-                break;
-        }
 
         cam = &gspca_dev->cam;
-        cam->dev_name = (char *) id->driver_info;
         cam->epaddr = 0x01;
         cam->cam_mode = vga_mode;
+        sd->subtype = id->driver_info;
         if (sd->subtype != IntelPCCameraPro)
                 cam->nmodes = sizeof vga_mode / sizeof vga_mode[0];
         else                    /* no 640x480 for IntelPCCameraPro */
@@ -785,77 +756,30 @@ static void sd_close(struct gspca_dev *gspca_dev)
         reg_write(gspca_dev->dev, 0x05, 0x11, 0xf);
 }
 
-/* convert YYUV per line to YUYV (YUV 4:2:2) */
-static void yyuv_decode(unsigned char *out,
-                        unsigned char *in,
-                        int width,
-                        int height)
-{
-        unsigned char *Ui, *Vi, *yi, *yi1;
-        unsigned char *out1;
-        int i, j;
-
-        yi = in;
-        for (i = height / 2; --i >= 0; ) {
-                out1 = out + width * 2;         /* next line */
-                yi1 = yi + width;
-                Ui = yi1 + width;
-                Vi = Ui + width / 2;
-                for (j = width / 2; --j >= 0; ) {
-                        *out++ = 128 + *yi++;
-                        *out++ = 128 + *Ui;
-                        *out++ = 128 + *yi++;
-                        *out++ = 128 + *Vi;
-
-                        *out1++ = 128 + *yi1++;
-                        *out1++ = 128 + *Ui++;
-                        *out1++ = 128 + *yi1++;
-                        *out1++ = 128 + *Vi++;
-                }
-                yi += width * 2;
-                out = out1;
-        }
-}
-
 static void sd_pkt_scan(struct gspca_dev *gspca_dev,
                         struct gspca_frame *frame,      /* target */
                         __u8 *data,                     /* isoc packet */
                         int len)                        /* iso packet length */
 {
-        struct sd *sd = (struct sd *) gspca_dev;
-
         switch (data[0]) {
         case 0:                         /* start of frame */
-                if (gspca_dev->last_packet_type == FIRST_PACKET) {
-                        yyuv_decode(sd->tmpbuf2, sd->tmpbuf,
-                                        gspca_dev->width,
-                                        gspca_dev->height);
-                        frame = gspca_frame_add(gspca_dev,
-                                                LAST_PACKET,
-                                                frame,
-                                                sd->tmpbuf2,
-                                                gspca_dev->width
-                                                        * gspca_dev->height
-                                                        * 2);
-                }
-                gspca_frame_add(gspca_dev, FIRST_PACKET, frame,
-                                data, 0);
+                frame = gspca_frame_add(gspca_dev, LAST_PACKET, frame,
+                                        data, 0);
                 data += SPCA50X_OFFSET_DATA;
                 len -= SPCA50X_OFFSET_DATA;
-                if (len > 0)
-                        memcpy(sd->tmpbuf, data, len);
-                else
-                        len = 0;
-                sd->buflen = len;
-                return;
+                gspca_frame_add(gspca_dev, FIRST_PACKET, frame,
+                                data, len);
+                break;
         case 0xff:                      /* drop */
 /*              gspca_dev->last_packet_type = DISCARD_PACKET; */
-                return;
+                break;
+        default:
+                data += 1;
+                len -= 1;
+                gspca_frame_add(gspca_dev, FIRST_PACKET, frame,
+                                data, len);
+                break;
         }
-        data += 1;
-        len -= 1;
-        memcpy(&sd->tmpbuf[sd->buflen], data, len);
-        sd->buflen += len;
 }
 
 static void setbrightness(struct gspca_dev *gspca_dev)
@@ -910,10 +834,10 @@ static const struct sd_desc sd_desc = {
 };
 
 /* -- module initialisation -- */
-#define DVNM(name) .driver_info = (kernel_ulong_t) name
 static const __devinitdata struct usb_device_id device_table[] = {
-        {USB_DEVICE(0x041e, 0x401d), DVNM("Creative Webcam NX ULTRA")},
-        {USB_DEVICE(0x0733, 0x0430), DVNM("Intel PC Camera Pro")},
+        {USB_DEVICE(0x041e, 0x401d), .driver_info = Nxultra},
+        {USB_DEVICE(0x0733, 0x0430), .driver_info = IntelPCCameraPro},
+/*fixme: may be UsbGrabberPV321 BRIDGE_SPCA506 SENSOR_SAA7113 */
         {}
 };
 MODULE_DEVICE_TABLE(usb, device_table);
@@ -938,7 +862,7 @@ static int __init sd_mod_init(void)
 {
         if (usb_register(&sd_driver) < 0)
                 return -1;
-        PDEBUG(D_PROBE, "v%s registered", version);
+        PDEBUG(D_PROBE, "registered");
         return 0;
 }
 static void __exit sd_mod_exit(void)
diff --git a/drivers/media/video/gspca/spca506.c b/drivers/media/video/gspca/spca506.c
index 143203c1fd9f..6fe715c80ad2 100644
--- a/drivers/media/video/gspca/spca506.c
+++ b/drivers/media/video/gspca/spca506.c
@@ -25,9 +25,6 @@
 
 #include "gspca.h"
 
-#define DRIVER_VERSION_NUMBER   KERNEL_VERSION(2, 1, 7)
-static const char version[] = "2.1.7";
-
 MODULE_AUTHOR("Michel Xhaard <mxhaard@users.sourceforge.net>");
 MODULE_DESCRIPTION("GSPCA/SPCA506 USB Camera Driver");
 MODULE_LICENSE("GPL");
@@ -36,10 +33,6 @@ MODULE_LICENSE("GPL");
 struct sd {
         struct gspca_dev gspca_dev;     /* !! must be the first item */
 
-        int buflen;
-        __u8 tmpbuf[640 * 480 * 3];     /* YYUV per line */
-        __u8 tmpbuf2[640 * 480 * 2];    /* YUYV */
-
         unsigned char brightness;
         unsigned char contrast;
         unsigned char colors;
@@ -118,29 +111,29 @@ static struct ctrl sd_ctrls[] = {
 };
 
 static struct v4l2_pix_format vga_mode[] = {
-        {160, 120, V4L2_PIX_FMT_YUYV, V4L2_FIELD_NONE,
-                .bytesperline = 160 * 2,
-                .sizeimage = 160 * 120 * 2,
+        {160, 120, V4L2_PIX_FMT_SPCA505, V4L2_FIELD_NONE,
+                .bytesperline = 160 * 3,
+                .sizeimage = 160 * 120 * 3 / 2,
                 .colorspace = V4L2_COLORSPACE_SRGB,
                 .priv = 5},
-        {176, 144, V4L2_PIX_FMT_YUYV, V4L2_FIELD_NONE,
-                .bytesperline = 176 * 2,
-                .sizeimage = 176 * 144 * 2,
+        {176, 144, V4L2_PIX_FMT_SPCA505, V4L2_FIELD_NONE,
+                .bytesperline = 176 * 3,
+                .sizeimage = 176 * 144 * 3 / 2,
                 .colorspace = V4L2_COLORSPACE_SRGB,
                 .priv = 4},
-        {320, 240, V4L2_PIX_FMT_YUYV, V4L2_FIELD_NONE,
-                .bytesperline = 320 * 2,
-                .sizeimage = 320 * 240 * 2,
+        {320, 240, V4L2_PIX_FMT_SPCA505, V4L2_FIELD_NONE,
+                .bytesperline = 320 * 3,
+                .sizeimage = 320 * 240 * 3 / 2,
                 .colorspace = V4L2_COLORSPACE_SRGB,
                 .priv = 2},
-        {352, 288, V4L2_PIX_FMT_YUYV, V4L2_FIELD_NONE,
-                .bytesperline = 352 * 2,
-                .sizeimage = 352 * 288 * 2,
+        {352, 288, V4L2_PIX_FMT_SPCA505, V4L2_FIELD_NONE,
+                .bytesperline = 352 * 3,
+                .sizeimage = 352 * 288 * 3 / 2,
                 .colorspace = V4L2_COLORSPACE_SRGB,
                 .priv = 1},
-        {640, 480, V4L2_PIX_FMT_YUYV, V4L2_FIELD_NONE,
-                .bytesperline = 640 * 2,
-                .sizeimage = 640 * 480 * 2,
+        {640, 480, V4L2_PIX_FMT_SPCA505, V4L2_FIELD_NONE,
+                .bytesperline = 640 * 3,
+                .sizeimage = 640 * 480 * 3 / 2,
                 .colorspace = V4L2_COLORSPACE_SRGB,
                 .priv = 0},
 };
@@ -310,7 +303,6 @@ static int sd_config(struct gspca_dev *gspca_dev,
         struct cam *cam;
 
         cam = &gspca_dev->cam;
-        cam->dev_name = (char *) id->driver_info;
         cam->epaddr = 0x01;
         cam->cam_mode = vga_mode;
         cam->nmodes = sizeof vga_mode / sizeof vga_mode[0];
@@ -576,77 +568,30 @@ static void sd_close(struct gspca_dev *gspca_dev)
 {
 }
 
-/* convert YYUV per line to YUYV (YUV 4:2:2) */
-static void yyuv_decode(unsigned char *out,
-                        unsigned char *in,
-                        int width,
-                        int height)
-{
-        unsigned char *Ui, *Vi, *yi, *yi1;
-        unsigned char *out1;
-        int i, j;
-
-        yi = in;
-        for (i = height / 2; --i >= 0; ) {
-                out1 = out + width * 2;         /* next line */
-                yi1 = yi + width;
-                Ui = yi1 + width;
-                Vi = Ui + width / 2;
-                for (j = width / 2; --j >= 0; ) {
-                        *out++ = 128 + *yi++;
-                        *out++ = 128 + *Ui;
-                        *out++ = 128 + *yi++;
-                        *out++ = 128 + *Vi;
-
-                        *out1++ = 128 + *yi1++;
-                        *out1++ = 128 + *Ui++;
-                        *out1++ = 128 + *yi1++;
-                        *out1++ = 128 + *Vi++;
-                }
-                yi += width * 2;
-                out = out1;
-        }
-}
-
 static void sd_pkt_scan(struct gspca_dev *gspca_dev,
                         struct gspca_frame *frame,      /* target */
                         __u8 *data,                     /* isoc packet */
                         int len)                        /* iso packet length */
 {
-        struct sd *sd = (struct sd *) gspca_dev;
-
         switch (data[0]) {
         case 0:                         /* start of frame */
-                if (gspca_dev->last_packet_type == FIRST_PACKET) {
-                        yyuv_decode(sd->tmpbuf2, sd->tmpbuf,
-                                        gspca_dev->width,
-                                        gspca_dev->height);
-                        frame = gspca_frame_add(gspca_dev,
-                                                LAST_PACKET,
-                                                frame,
-                                                sd->tmpbuf2,
-                                                gspca_dev->width
-                                                        * gspca_dev->height
-                                                        * 2);
-                }
-                gspca_frame_add(gspca_dev, FIRST_PACKET, frame,
-                                data, 0);
+                frame = gspca_frame_add(gspca_dev, LAST_PACKET, frame,
+                                        data, 0);
                 data += SPCA50X_OFFSET_DATA;
                 len -= SPCA50X_OFFSET_DATA;
-                if (len > 0)
-                        memcpy(sd->tmpbuf, data, len);
-                else
-                        len = 0;
-                sd->buflen = len;
-                return;
+                gspca_frame_add(gspca_dev, FIRST_PACKET, frame,
+                                data, len);
+                break;
         case 0xff:                      /* drop */
 /*              gspca_dev->last_packet_type = DISCARD_PACKET; */
-                return;
+                break;
+        default:
+                data += 1;
+                len -= 1;
+                gspca_frame_add(gspca_dev, FIRST_PACKET, frame,
+                                data, len);
+                break;
         }
-        data += 1;
-        len -= 1;
-        memcpy(&sd->tmpbuf[sd->buflen], data, len);
-        sd->buflen += len;
 }
 
 static void setbrightness(struct gspca_dev *gspca_dev)
@@ -804,12 +749,12 @@ static struct sd_desc sd_desc = {
 };
 
 /* -- module initialisation -- */
-#define DVNM(name) .driver_info = (kernel_ulong_t) name
 static __devinitdata struct usb_device_id device_table[] = {
-        {USB_DEVICE(0x06e1, 0xa190), DVNM("ADS Instant VCD")},
-/*      {USB_DEVICE(0x0733, 0x0430), DVNM("UsbGrabber PV321c")}, */
-        {USB_DEVICE(0x0734, 0x043b), DVNM("3DeMon USB Capture aka")},
-        {USB_DEVICE(0x99fa, 0x8988), DVNM("Grandtec V.cap")},
+        {USB_DEVICE(0x06e1, 0xa190)},
+/*fixme: may be IntelPCCameraPro BRIDGE_SPCA505
+        {USB_DEVICE(0x0733, 0x0430)}, */
+        {USB_DEVICE(0x0734, 0x043b)},
+        {USB_DEVICE(0x99fa, 0x8988)},
         {}
 };
 MODULE_DEVICE_TABLE(usb, device_table);
@@ -834,7 +779,7 @@ static int __init sd_mod_init(void)
 {
         if (usb_register(&sd_driver) < 0)
                 return -1;
-        PDEBUG(D_PROBE, "v%s registered", version);
+        PDEBUG(D_PROBE, "registered");
         return 0;
 }
 static void __exit sd_mod_exit(void)
diff --git a/drivers/media/video/gspca/spca508.c b/drivers/media/video/gspca/spca508.c
index d8cd93866a4a..b608a27ad115 100644
--- a/drivers/media/video/gspca/spca508.c
+++ b/drivers/media/video/gspca/spca508.c
@@ -22,9 +22,6 @@
 
 #include "gspca.h"
 
-#define DRIVER_VERSION_NUMBER   KERNEL_VERSION(2, 1, 7)
-static const char version[] = "2.1.7";
-
 MODULE_AUTHOR("Michel Xhaard <mxhaard@users.sourceforge.net>");
 MODULE_DESCRIPTION("GSPCA/SPCA508 USB Camera Driver");
 MODULE_LICENSE("GPL");
@@ -33,10 +30,6 @@ MODULE_LICENSE("GPL");
 struct sd {
         struct gspca_dev gspca_dev;             /* !! must be the first item */
 
-        int buflen;
-        unsigned char tmpbuf[352 * 288 * 3 / 2]; /* YUVY per line */
-        unsigned char tmpbuf2[352 * 288 * 2];   /* YUYV */
-
         unsigned char brightness;
 
         char subtype;
@@ -71,23 +64,23 @@ static struct ctrl sd_ctrls[] = {
 
 static struct v4l2_pix_format sif_mode[] = {
         {160, 120, V4L2_PIX_FMT_YUYV, V4L2_FIELD_NONE,
-                .bytesperline = 160 * 2,
-                .sizeimage = 160 * 120 * 2,
+                .bytesperline = 160 * 3,
+                .sizeimage = 160 * 120 * 3 / 2,
                 .colorspace = V4L2_COLORSPACE_SRGB,
                 .priv = 3},
         {176, 144, V4L2_PIX_FMT_YUYV, V4L2_FIELD_NONE,
-                .bytesperline = 176 * 2,
-                .sizeimage = 176 * 144 * 2,
+                .bytesperline = 176 * 3,
+                .sizeimage = 176 * 144 * 3 / 2,
                 .colorspace = V4L2_COLORSPACE_SRGB,
                 .priv = 2},
         {320, 240, V4L2_PIX_FMT_YUYV, V4L2_FIELD_NONE,
-                .bytesperline = 320 * 2,
-                .sizeimage = 320 * 240 * 2,
+                .bytesperline = 320 * 3,
+                .sizeimage = 320 * 240 * 3 / 2,
                 .colorspace = V4L2_COLORSPACE_SRGB,
                 .priv = 1},
         {352, 288, V4L2_PIX_FMT_YUYV, V4L2_FIELD_NONE,
-                .bytesperline = 352 * 2,
-                .sizeimage = 352 * 288 * 2,
+                .bytesperline = 352 * 3,
+                .sizeimage = 352 * 288 * 3 / 2,
                 .colorspace = V4L2_COLORSPACE_SRGB,
                 .priv = 0},
 };
@@ -1476,58 +1469,8 @@ static int sd_config(struct gspca_dev *gspca_dev,
 {
         struct sd *sd = (struct sd *) gspca_dev;
         struct cam *cam;
-        __u16 product;
         int data1, data2;
 
-        product = id->idProduct;
-        switch (id->idVendor) {
-        case 0x0130:            /* Clone webcam */
-/*              switch (product) { */
-/*              case 0x0130: */
-                        sd->subtype = HamaUSBSightcam;  /* same as Hama 0010 */
-/*                      break; */
-/*              } */
-                break;
-        case 0x041e:            /* Creative cameras */
-/*              switch (product) { */
-/*              case 0x4018: */
-                        sd->subtype = CreativeVista;
-/*                      break; */
-/*              } */
-                break;
-        case 0x0461:            /* MicroInnovation */
-/*              switch (product) { */
-/*              case 0x0815: */
-                        sd->subtype = MicroInnovationIC200;
-/*                      break; */
-/*              } */
-                break;
-        case 0x0733:    /* Rebadged ViewQuest (Intel) and ViewQuest cameras */
-/*              switch (product) { */
-/*              case 0x110: */
-                        sd->subtype = ViewQuestVQ110;
-/*                      break; */
-/*              } */
-                break;
-        case 0x0af9:            /* Hama cameras */
-                switch (product) {
-                case 0x0010:
-                        sd->subtype = HamaUSBSightcam;
-                        break;
-                case 0x0011:
-                        sd->subtype = HamaUSBSightcam2;
-                        break;
-                }
-                break;
-        case 0x8086:            /* Intel */
-/*              switch (product) { */
-/*              case 0x0110: */
-                        sd->subtype = IntelEasyPCCamera;
-/*                      break; */
-/*              } */
-                break;
-        }
-
         /* Read from global register the USB product and vendor IDs, just to
          * prove that we can communicate with the device.  This works, which
          * confirms at we are communicating properly and that the device
@@ -1544,10 +1487,11 @@ static int sd_config(struct gspca_dev *gspca_dev,
         PDEBUG(D_PROBE, "Window 1 average luminance: %d", data1);
 
         cam = &gspca_dev->cam;
-        cam->dev_name = (char *) id->driver_info;
         cam->epaddr = 0x01;
         cam->cam_mode = sif_mode;
         cam->nmodes = ARRAY_SIZE(sif_mode);
+
+        sd->subtype = id->driver_info;
         sd->brightness = BRIGHTNESS_DEF;
 
         switch (sd->subtype) {
@@ -1619,77 +1563,30 @@ static void sd_close(struct gspca_dev *gspca_dev)
 {
 }
 
-/* convert YUVY per line to YUYV (YUV 4:2:2) */
-static void yuvy_decode(unsigned char *out,
-                        unsigned char *in,
-                        int width,
-                        int height)
-{
-        unsigned char *Ui, *Vi, *yi, *yi1;
-        unsigned char *out1;
-        int i, j;
-
-        yi = in;
-        for (i = height / 2; --i >= 0; ) {
-                out1 = out + width * 2;         /* next line */
-                Ui = yi + width;
-                Vi = Ui + width / 2;
-                yi1 = Vi + width / 2;
-                for (j = width / 2; --j >= 0; ) {
-                        *out++ = 128 + *yi++;
-                        *out++ = 128 + *Ui;
-                        *out++ = 128 + *yi++;
-                        *out++ = 128 + *Vi;
-
-                        *out1++ = 128 + *yi1++;
-                        *out1++ = 128 + *Ui++;
-                        *out1++ = 128 + *yi1++;
-                        *out1++ = 128 + *Vi++;
-                }
-                yi += width * 2;
-                out = out1;
-        }
-}
-
 static void sd_pkt_scan(struct gspca_dev *gspca_dev,
                         struct gspca_frame *frame,      /* target */
                         __u8 *data,                     /* isoc packet */
                         int len)                        /* iso packet length */
 {
-        struct sd *sd = (struct sd *) gspca_dev;
-
         switch (data[0]) {
         case 0:                         /* start of frame */
-                if (gspca_dev->last_packet_type == FIRST_PACKET) {
-                        yuvy_decode(sd->tmpbuf2, sd->tmpbuf,
-                                        gspca_dev->width,
-                                        gspca_dev->height);
-                        frame = gspca_frame_add(gspca_dev,
-                                                LAST_PACKET,
-                                                frame,
-                                                sd->tmpbuf2,
-                                                gspca_dev->width
-                                                        * gspca_dev->height
-                                                        * 2);
-                }
-                gspca_frame_add(gspca_dev, FIRST_PACKET, frame,
-                                data, 0);
+                frame = gspca_frame_add(gspca_dev, LAST_PACKET, frame,
+                                        data, 0);
                 data += SPCA508_OFFSET_DATA;
                 len -= SPCA508_OFFSET_DATA;
-                if (len > 0)
-                        memcpy(sd->tmpbuf, data, len);
-                else
-                        len = 0;
-                sd->buflen = len;
-                return;
+                gspca_frame_add(gspca_dev, FIRST_PACKET, frame,
+                                data, len);
+                break;
         case 0xff:                      /* drop */
 /*              gspca_dev->last_packet_type = DISCARD_PACKET; */
-                return;
+                break;
+        default:
+                data += 1;
+                len -= 1;
+                gspca_frame_add(gspca_dev, FIRST_PACKET, frame,
+                                data, len);
+                break;
         }
-        data += 1;
-        len -= 1;
-        memcpy(&sd->tmpbuf[sd->buflen], data, len);
-        sd->buflen += len;
 }
 
 static void setbrightness(struct gspca_dev *gspca_dev)
@@ -1745,15 +1642,14 @@ static const struct sd_desc sd_desc = {
 };
 
 /* -- module initialisation -- */
-#define DVNM(name) .driver_info = (kernel_ulong_t) name
 static const __devinitdata struct usb_device_id device_table[] = {
-        {USB_DEVICE(0x0130, 0x0130), DVNM("Clone Digital Webcam 11043")},
-        {USB_DEVICE(0x041e, 0x4018), DVNM("Creative Webcam Vista (PD1100)")},
-        {USB_DEVICE(0x0461, 0x0815), DVNM("Micro Innovation IC200")},
-        {USB_DEVICE(0x0733, 0x0110), DVNM("ViewQuest VQ110")},
-        {USB_DEVICE(0x0af9, 0x0010), DVNM("Hama USB Sightcam 100")},
-        {USB_DEVICE(0x0af9, 0x0011), DVNM("Hama USB Sightcam 100")},
-        {USB_DEVICE(0x8086, 0x0110), DVNM("Intel Easy PC Camera")},
+        {USB_DEVICE(0x0130, 0x0130), .driver_info = HamaUSBSightcam},
+        {USB_DEVICE(0x041e, 0x4018), .driver_info = CreativeVista},
+        {USB_DEVICE(0x0461, 0x0815), .driver_info = MicroInnovationIC200},
+        {USB_DEVICE(0x0733, 0x0110), .driver_info = ViewQuestVQ110},
+        {USB_DEVICE(0x0af9, 0x0010), .driver_info = HamaUSBSightcam},
+        {USB_DEVICE(0x0af9, 0x0011), .driver_info = HamaUSBSightcam2},
+        {USB_DEVICE(0x8086, 0x0110), .driver_info = IntelEasyPCCamera},
         {}
 };
 MODULE_DEVICE_TABLE(usb, device_table);
@@ -1778,7 +1674,7 @@ static int __init sd_mod_init(void)
 {
         if (usb_register(&sd_driver) < 0)
                 return -1;
-        PDEBUG(D_PROBE, "v%s registered", version);
+        PDEBUG(D_PROBE, "registered");
         return 0;
 }
 static void __exit sd_mod_exit(void)
diff --git a/drivers/media/video/gspca/spca561.c b/drivers/media/video/gspca/spca561.c
index b659bd0f788d..a26174508cb9 100644
--- a/drivers/media/video/gspca/spca561.c
+++ b/drivers/media/video/gspca/spca561.c
@@ -24,9 +24,6 @@
 
 #include "gspca.h"
 
-#define DRIVER_VERSION_NUMBER   KERNEL_VERSION(2, 1, 7)
-static const char version[] = "2.1.7";
-
 MODULE_AUTHOR("Michel Xhaard <mxhaard@users.sourceforge.net>");
 MODULE_DESCRIPTION("GSPCA/SPCA561 USB Camera Driver");
 MODULE_LICENSE("GPL");
@@ -582,35 +579,15 @@ static int sd_config(struct gspca_dev *gspca_dev,
                 PDEBUG(D_PROBE, "Bad vendor / product from device");
                 return -EINVAL;
         }
-        switch (product) {
-        case 0x0928:
-        case 0x0929:
-        case 0x092a:
-        case 0x092b:
-        case 0x092c:
-        case 0x092d:
-        case 0x092e:
-        case 0x092f:
-        case 0x403b:
-                sd->chip_revision = Rev012A;
-                break;
-        default:
-/*      case 0x0561:
-        case 0x0815:                    * ?? in spca508.c
-        case 0x401a:
-        case 0x7004:
-        case 0x7e50:
-        case 0xa001:
-        case 0xcdee: */
-                sd->chip_revision = Rev072A;
-                break;
-        }
+
         cam = &gspca_dev->cam;
         cam->dev_name = (char *) id->driver_info;
         cam->epaddr = 0x01;
         gspca_dev->nbalt = 7 + 1;       /* choose alternate 7 first */
         cam->cam_mode = sif_mode;
         cam->nmodes = sizeof sif_mode / sizeof sif_mode[0];
+
+        sd->chip_revision = id->driver_info;
         sd->brightness = sd_ctrls[SD_BRIGHTNESS].qctrl.default_value;
         sd->contrast = sd_ctrls[SD_CONTRAST].qctrl.default_value;
         sd->autogain = sd_ctrls[SD_AUTOGAIN].qctrl.default_value;
@@ -997,23 +974,22 @@ static const struct sd_desc sd_desc = {
 };
 
 /* -- module initialisation -- */
-#define DVNM(name) .driver_info = (kernel_ulong_t) name
 static const __devinitdata struct usb_device_id device_table[] = {
-        {USB_DEVICE(0x041e, 0x401a), DVNM("Creative Webcam Vista (PD1100)")},
-        {USB_DEVICE(0x041e, 0x403b),  DVNM("Creative Webcam Vista (VF0010)")},
-        {USB_DEVICE(0x0458, 0x7004), DVNM("Genius VideoCAM Express V2")},
-        {USB_DEVICE(0x046d, 0x0928), DVNM("Logitech QC Express Etch2")},
-        {USB_DEVICE(0x046d, 0x0929), DVNM("Labtec Webcam Elch2")},
-        {USB_DEVICE(0x046d, 0x092a), DVNM("Logitech QC for Notebook")},
-        {USB_DEVICE(0x046d, 0x092b), DVNM("Labtec Webcam Plus")},
-        {USB_DEVICE(0x046d, 0x092c), DVNM("Logitech QC chat Elch2")},
-        {USB_DEVICE(0x046d, 0x092d), DVNM("Logitech QC Elch2")},
-        {USB_DEVICE(0x046d, 0x092e), DVNM("Logitech QC Elch2")},
-        {USB_DEVICE(0x046d, 0x092f), DVNM("Logitech QC Elch2")},
-        {USB_DEVICE(0x04fc, 0x0561), DVNM("Flexcam 100")},
-        {USB_DEVICE(0x060b, 0xa001), DVNM("Maxell Compact Pc PM3")},
-        {USB_DEVICE(0x10fd, 0x7e50), DVNM("FlyCam Usb 100")},
-        {USB_DEVICE(0xabcd, 0xcdee), DVNM("Petcam")},
+        {USB_DEVICE(0x041e, 0x401a), .driver_info = Rev072A},
+        {USB_DEVICE(0x041e, 0x403b), .driver_info = Rev012A},
+        {USB_DEVICE(0x0458, 0x7004), .driver_info = Rev072A},
+        {USB_DEVICE(0x046d, 0x0928), .driver_info = Rev012A},
+        {USB_DEVICE(0x046d, 0x0929), .driver_info = Rev012A},
+        {USB_DEVICE(0x046d, 0x092a), .driver_info = Rev012A},
+        {USB_DEVICE(0x046d, 0x092b), .driver_info = Rev012A},
+        {USB_DEVICE(0x046d, 0x092c), .driver_info = Rev012A},
+        {USB_DEVICE(0x046d, 0x092d), .driver_info = Rev012A},
+        {USB_DEVICE(0x046d, 0x092e), .driver_info = Rev012A},
+        {USB_DEVICE(0x046d, 0x092f), .driver_info = Rev012A},
+        {USB_DEVICE(0x04fc, 0x0561), .driver_info = Rev072A},
+        {USB_DEVICE(0x060b, 0xa001), .driver_info = Rev072A},
+        {USB_DEVICE(0x10fd, 0x7e50), .driver_info = Rev072A},
+        {USB_DEVICE(0xabcd, 0xcdee), .driver_info = Rev072A},
         {}
 };
 
@@ -1039,7 +1015,7 @@ static int __init sd_mod_init(void)
 {
         if (usb_register(&sd_driver) < 0)
                 return -1;
-        PDEBUG(D_PROBE, "v%s registered", version);
+        PDEBUG(D_PROBE, "registered");
         return 0;
 }
 static void __exit sd_mod_exit(void)
diff --git a/drivers/media/video/gspca/stk014.c b/drivers/media/video/gspca/stk014.c
index c78ee0d3e59b..16219cf6a6d5 100644
--- a/drivers/media/video/gspca/stk014.c
+++ b/drivers/media/video/gspca/stk014.c
@@ -23,9 +23,6 @@
 #include "gspca.h"
 #include "jpeg.h"
 
-#define DRIVER_VERSION_NUMBER   KERNEL_VERSION(2, 1, 7)
-static const char version[] = "2.1.7";
-
 MODULE_AUTHOR("Jean-Francois Moine <http://moinejf.free.fr>");
 MODULE_DESCRIPTION("Syntek DV4000 (STK014) USB Camera Driver");
 MODULE_LICENSE("GPL");
@@ -299,7 +296,6 @@ static int sd_config(struct gspca_dev *gspca_dev,
         struct sd *sd = (struct sd *) gspca_dev;
         struct cam *cam = &gspca_dev->cam;
 
-        cam->dev_name = (char *) id->driver_info;
         cam->epaddr = 0x02;
         gspca_dev->cam.cam_mode = vga_mode;
         gspca_dev->cam.nmodes = ARRAY_SIZE(vga_mode);
@@ -549,9 +545,8 @@ static const struct sd_desc sd_desc = {
 };
 
 /* -- module initialisation -- */
-#define DVNM(name) .driver_info = (kernel_ulong_t) name
 static const __devinitdata struct usb_device_id device_table[] = {
-        {USB_DEVICE(0x05e1, 0x0893), DVNM("Syntek DV4000")},
+        {USB_DEVICE(0x05e1, 0x0893)},
         {}
 };
 MODULE_DEVICE_TABLE(usb, device_table);
@@ -576,7 +571,7 @@ static int __init sd_mod_init(void)
 {
         if (usb_register(&sd_driver) < 0)
                 return -1;
-        info("v%s registered", version);
+        info("registered");
         return 0;
 }
 static void __exit sd_mod_exit(void)
diff --git a/drivers/media/video/gspca/sunplus.c b/drivers/media/video/gspca/sunplus.c
index abd7bef9b3d1..54efa48bee01 100644
--- a/drivers/media/video/gspca/sunplus.c
+++ b/drivers/media/video/gspca/sunplus.c
@@ -24,9 +24,6 @@
 #include "gspca.h"
 #include "jpeg.h"
 
-#define DRIVER_VERSION_NUMBER   KERNEL_VERSION(2, 1, 8)
-static const char version[] = "2.1.8";
-
 MODULE_AUTHOR("Michel Xhaard <mxhaard@users.sourceforge.net>");
 MODULE_DESCRIPTION("GSPCA/SPCA5xx USB Camera Driver");
 MODULE_LICENSE("GPL");
@@ -804,229 +801,29 @@ static int sd_config(struct gspca_dev *gspca_dev,
         struct sd *sd = (struct sd *) gspca_dev;
         struct usb_device *dev = gspca_dev->dev;
         struct cam *cam;
-        __u16 vendor;
-        __u16 product;
-        __u8 fw;
-
-        vendor = id->idVendor;
-        product = id->idProduct;
-        switch (vendor) {
-        case 0x041e:            /* Creative cameras */
-/*              switch (product) { */
-/*              case 0x400b: */
-/*              case 0x4012: */
-/*              case 0x4013: */
-/*                      sd->bridge = BRIDGE_SPCA504C; */
-/*                      break; */
-/*              } */
-                break;
-        case 0x0458:            /* Genius KYE cameras */
-/*              switch (product) { */
-/*              case 0x7006: */
-                        sd->bridge = BRIDGE_SPCA504B;
-/*                      break; */
-/*              } */
-                break;
-        case 0x0461:            /* MicroInnovation */
-/*              switch (product) { */
-/*              case 0x0821: */
-                        sd->bridge = BRIDGE_SPCA533;
-/*                      break; */
-/*              } */
-                break;
-        case 0x046d:            /* Logitech Labtec */
-                switch (product) {
-                case 0x0905:
-                        sd->subtype = LogitechClickSmart820;
-                        sd->bridge = BRIDGE_SPCA533;
-                        break;
-                case 0x0960:
-                        sd->subtype = LogitechClickSmart420;
-                        sd->bridge = BRIDGE_SPCA504C;
-                        break;
-                }
-                break;
-        case 0x0471:                            /* Philips */
-/*              switch (product) { */
-/*              case 0x0322: */
-                        sd->bridge = BRIDGE_SPCA504B;
-/*                      break; */
-/*              } */
-                break;
-        case 0x04a5:            /* Benq */
-                switch (product) {
-                case 0x3003:
-                        sd->bridge = BRIDGE_SPCA504B;
-                        break;
-                case 0x3008:
-                case 0x300a:
-                        sd->bridge = BRIDGE_SPCA533;
-                        break;
-                }
-                break;
-        case 0x04f1:            /* JVC */
-/*              switch (product) { */
-/*              case 0x1001: */
-                        sd->bridge = BRIDGE_SPCA504B;
-/*                      break; */
-/*              } */
-                break;
-        case 0x04fc:            /* SunPlus */
-                switch (product) {
-                case 0x500c:
-                        sd->bridge = BRIDGE_SPCA504B;
-                        break;
-                case 0x504a:
+
+        cam = &gspca_dev->cam;
+        cam->epaddr = 0x01;
+
+        sd->bridge = id->driver_info >> 8;
+        sd->subtype = id->driver_info;
+
+        if (sd->subtype == AiptekMiniPenCam13) {
 /* try to get the firmware as some cam answer 2.0.1.2.2
  * and should be a spca504b then overwrite that setting */
-                        reg_r(dev, 0x20, 0, gspca_dev->usb_buf, 1);
-                        fw = gspca_dev->usb_buf[0];
-                        if (fw == 1) {
-                                sd->subtype = AiptekMiniPenCam13;
-                                sd->bridge = BRIDGE_SPCA504;
-                        } else if (fw == 2) {
-                                sd->bridge = BRIDGE_SPCA504B;
-                        } else
-                                return -ENODEV;
-                        break;
-                case 0x504b:
-                        sd->bridge = BRIDGE_SPCA504B;
-                        break;
-                case 0x5330:
-                        sd->bridge = BRIDGE_SPCA533;
-                        break;
-                case 0x5360:
-                        sd->bridge = BRIDGE_SPCA536;
-                        break;
-                case 0xffff:
-                        sd->bridge = BRIDGE_SPCA504B;
-                        break;
-                }
-                break;
-        case 0x052b:            /* ?? Megapix */
-/*              switch (product) { */
-/*              case 0x1513: */
-                        sd->subtype = MegapixV4;
-                        sd->bridge = BRIDGE_SPCA533;
-/*                      break; */
-/*              } */
-                break;
-        case 0x0546:            /* Polaroid */
-                switch (product) {
-                case 0x3155:
-                        sd->bridge = BRIDGE_SPCA533;
-                        break;
-                case 0x3191:
-                case 0x3273:
-                        sd->bridge = BRIDGE_SPCA504B;
-                        break;
-                }
-                break;
-        case 0x055f:            /* Mustek cameras */
-                switch (product) {
-                case 0xc211:
-                        sd->bridge = BRIDGE_SPCA536;
-                        break;
-                case 0xc230:
-                case 0xc232:
-                        sd->bridge = BRIDGE_SPCA533;
-                        break;
-                case 0xc360:
-                        sd->bridge = BRIDGE_SPCA536;
-                        break;
-                case 0xc420:
-                        sd->bridge = BRIDGE_SPCA504;
-                        break;
-                case 0xc430:
-                case 0xc440:
-                        sd->bridge = BRIDGE_SPCA533;
-                        break;
-                case 0xc520:
-                        sd->bridge = BRIDGE_SPCA504;
-                        break;
-                case 0xc530:
-                case 0xc540:
-                case 0xc630:
-                case 0xc650:
-                        sd->bridge = BRIDGE_SPCA533;
-                        break;
-                }
-                break;
-        case 0x05da:            /* Digital Dream cameras */
-/*              switch (product) { */
-/*              case 0x1018: */
+                reg_r(dev, 0x20, 0, gspca_dev->usb_buf, 1);
+                switch (gspca_dev->usb_buf[0]) {
+                case 1:
+                        break;          /* (right bridge/subtype) */
+                case 2:
                         sd->bridge = BRIDGE_SPCA504B;
-/*                      break; */
-/*              } */
-                break;
-        case 0x06d6:            /* Trust */
-/*              switch (product) { */
-/*              case 0x0031: */
-                        sd->bridge = BRIDGE_SPCA533;    /* SPCA533A */
-/*                      break; */
-/*              } */
-                break;
-        case 0x0733:    /* Rebadged ViewQuest (Intel) and ViewQuest cameras */
-                switch (product) {
-                case 0x1311:
-                case 0x1314:
-                case 0x2211:
-                case 0x2221:
-                        sd->bridge = BRIDGE_SPCA533;
-                        break;
-                case 0x3261:
-                case 0x3281:
-                        sd->bridge = BRIDGE_SPCA536;
-                        break;
-                }
-                break;
-        case 0x08ca:            /* Aiptek */
-                switch (product) {
-                case 0x0104:
-                case 0x0106:
-                        sd->bridge = BRIDGE_SPCA533;
-                        break;
-                case 0x2008:
-                        sd->bridge = BRIDGE_SPCA504B;
-                        break;
-                case 0x2010:
-                        sd->bridge = BRIDGE_SPCA533;
-                        break;
-                case 0x2016:
-                case 0x2018:
-                        sd->bridge = BRIDGE_SPCA504B;
-                        break;
-                case 0x2020:
-                case 0x2022:
-                        sd->bridge = BRIDGE_SPCA533;
-                        break;
-                case 0x2024:
-                        sd->bridge = BRIDGE_SPCA536;
-                        break;
-                case 0x2028:
-                        sd->bridge = BRIDGE_SPCA533;
-                        break;
-                case 0x2040:
-                case 0x2042:
-                case 0x2050:
-                case 0x2060:
-                        sd->bridge = BRIDGE_SPCA536;
+                        sd->subtype = 0;
                         break;
+                default:
+                        return -ENODEV;
                 }
-                break;
-        case 0x0d64:            /* SunPlus */
-/*              switch (product) { */
-/*              case 0x0303: */
-                        sd->bridge = BRIDGE_SPCA536;
-/*                      break; */
-/*              } */
-                break;
         }
 
-        cam = &gspca_dev->cam;
-        cam->dev_name = (char *) id->driver_info;
-        cam->epaddr = 0x01;
-
         switch (sd->bridge) {
         default:
 /*      case BRIDGE_SPCA504B: */
@@ -1581,65 +1378,67 @@ static const struct sd_desc sd_desc = {
 };
 
 /* -- module initialisation -- */
-#define DVNM(name) .driver_info = (kernel_ulong_t) name
+#define BS(bridge, subtype) \
+        .driver_info = (BRIDGE_ ## bridge << 8) \
+                        | (subtype)
 static const __devinitdata struct usb_device_id device_table[] = {
-        {USB_DEVICE(0x041e, 0x400b), DVNM("Creative PC-CAM 600")},
-        {USB_DEVICE(0x041e, 0x4012), DVNM("PC-Cam350")},
-        {USB_DEVICE(0x041e, 0x4013), DVNM("Creative Pccam750")},
-        {USB_DEVICE(0x0458, 0x7006), DVNM("Genius Dsc 1.3 Smart")},
-        {USB_DEVICE(0x0461, 0x0821), DVNM("Fujifilm MV-1")},
-        {USB_DEVICE(0x046d, 0x0905), DVNM("Logitech ClickSmart 820")},
-        {USB_DEVICE(0x046d, 0x0960), DVNM("Logitech ClickSmart 420")},
-        {USB_DEVICE(0x0471, 0x0322), DVNM("Philips DMVC1300K")},
-        {USB_DEVICE(0x04a5, 0x3003), DVNM("Benq DC 1300")},
-        {USB_DEVICE(0x04a5, 0x3008), DVNM("Benq DC 1500")},
-        {USB_DEVICE(0x04a5, 0x300a), DVNM("Benq DC3410")},
-        {USB_DEVICE(0x04f1, 0x1001), DVNM("JVC GC A50")},
-        {USB_DEVICE(0x04fc, 0x500c), DVNM("Sunplus CA500C")},
-        {USB_DEVICE(0x04fc, 0x504a), DVNM("Aiptek Mini PenCam 1.3")},
-        {USB_DEVICE(0x04fc, 0x504b), DVNM("Maxell MaxPocket LE 1.3")},
-        {USB_DEVICE(0x04fc, 0x5330), DVNM("Digitrex 2110")},
-        {USB_DEVICE(0x04fc, 0x5360), DVNM("Sunplus Generic")},
-        {USB_DEVICE(0x04fc, 0xffff), DVNM("Pure DigitalDakota")},
-        {USB_DEVICE(0x052b, 0x1513), DVNM("Megapix V4")},
-        {USB_DEVICE(0x0546, 0x3155), DVNM("Polaroid PDC3070")},
-        {USB_DEVICE(0x0546, 0x3191), DVNM("Polaroid Ion 80")},
-        {USB_DEVICE(0x0546, 0x3273), DVNM("Polaroid PDC2030")},
-        {USB_DEVICE(0x055f, 0xc211), DVNM("Kowa Bs888e Microcamera")},
-        {USB_DEVICE(0x055f, 0xc230), DVNM("Mustek Digicam 330K")},
-        {USB_DEVICE(0x055f, 0xc232), DVNM("Mustek MDC3500")},
-        {USB_DEVICE(0x055f, 0xc360), DVNM("Mustek DV4000 Mpeg4 ")},
-        {USB_DEVICE(0x055f, 0xc420), DVNM("Mustek gSmart Mini 2")},
-        {USB_DEVICE(0x055f, 0xc430), DVNM("Mustek Gsmart LCD 2")},
-        {USB_DEVICE(0x055f, 0xc440), DVNM("Mustek DV 3000")},
-        {USB_DEVICE(0x055f, 0xc520), DVNM("Mustek gSmart Mini 3")},
-        {USB_DEVICE(0x055f, 0xc530), DVNM("Mustek Gsmart LCD 3")},
-        {USB_DEVICE(0x055f, 0xc540), DVNM("Gsmart D30")},
-        {USB_DEVICE(0x055f, 0xc630), DVNM("Mustek MDC4000")},
-        {USB_DEVICE(0x055f, 0xc650), DVNM("Mustek MDC5500Z")},
-        {USB_DEVICE(0x05da, 0x1018), DVNM("Digital Dream Enigma 1.3")},
-        {USB_DEVICE(0x06d6, 0x0031), DVNM("Trust 610 LCD PowerC@m Zoom")},
-        {USB_DEVICE(0x0733, 0x1311), DVNM("Digital Dream Epsilon 1.3")},
-        {USB_DEVICE(0x0733, 0x1314), DVNM("Mercury 2.1MEG Deluxe Classic Cam")},
-        {USB_DEVICE(0x0733, 0x2211), DVNM("Jenoptik jdc 21 LCD")},
-        {USB_DEVICE(0x0733, 0x2221), DVNM("Mercury Digital Pro 3.1p")},
-        {USB_DEVICE(0x0733, 0x3261), DVNM("Concord 3045 spca536a")},
-        {USB_DEVICE(0x0733, 0x3281), DVNM("Cyberpix S550V")},
-        {USB_DEVICE(0x08ca, 0x0104), DVNM("Aiptek PocketDVII 1.3")},
-        {USB_DEVICE(0x08ca, 0x0106), DVNM("Aiptek Pocket DV3100+")},
-        {USB_DEVICE(0x08ca, 0x2008), DVNM("Aiptek Mini PenCam 2 M")},
-        {USB_DEVICE(0x08ca, 0x2010), DVNM("Aiptek PocketCam 3M")},
-        {USB_DEVICE(0x08ca, 0x2016), DVNM("Aiptek PocketCam 2 Mega")},
-        {USB_DEVICE(0x08ca, 0x2018), DVNM("Aiptek Pencam SD 2M")},
-        {USB_DEVICE(0x08ca, 0x2020), DVNM("Aiptek Slim 3000F")},
-        {USB_DEVICE(0x08ca, 0x2022), DVNM("Aiptek Slim 3200")},
-        {USB_DEVICE(0x08ca, 0x2024), DVNM("Aiptek DV3500 Mpeg4 ")},
-        {USB_DEVICE(0x08ca, 0x2028), DVNM("Aiptek PocketCam4M")},
-        {USB_DEVICE(0x08ca, 0x2040), DVNM("Aiptek PocketDV4100M")},
-        {USB_DEVICE(0x08ca, 0x2042), DVNM("Aiptek PocketDV5100")},
-        {USB_DEVICE(0x08ca, 0x2050), DVNM("Medion MD 41437")},
-        {USB_DEVICE(0x08ca, 0x2060), DVNM("Aiptek PocketDV5300")},
-        {USB_DEVICE(0x0d64, 0x0303), DVNM("Sunplus FashionCam DXG")},
+        {USB_DEVICE(0x041e, 0x400b), BS(SPCA504C, 0)},
+        {USB_DEVICE(0x041e, 0x4012), BS(SPCA504C, 0)},
+        {USB_DEVICE(0x041e, 0x4013), BS(SPCA504C, 0)},
+        {USB_DEVICE(0x0458, 0x7006), BS(SPCA504B, 0)},
+        {USB_DEVICE(0x0461, 0x0821), BS(SPCA533, 0)},
+        {USB_DEVICE(0x046d, 0x0905), BS(SPCA533, LogitechClickSmart820)},
+        {USB_DEVICE(0x046d, 0x0960), BS(SPCA504C, LogitechClickSmart420)},
+        {USB_DEVICE(0x0471, 0x0322), BS(SPCA504B, 0)},
+        {USB_DEVICE(0x04a5, 0x3003), BS(SPCA504B, 0)},
+        {USB_DEVICE(0x04a5, 0x3008), BS(SPCA533, 0)},
+        {USB_DEVICE(0x04a5, 0x300a), BS(SPCA533, 0)},
+        {USB_DEVICE(0x04f1, 0x1001), BS(SPCA504B, 0)},
+        {USB_DEVICE(0x04fc, 0x500c), BS(SPCA504B, 0)},
+        {USB_DEVICE(0x04fc, 0x504a), BS(SPCA504, AiptekMiniPenCam13)},
+        {USB_DEVICE(0x04fc, 0x504b), BS(SPCA504B, 0)},
+        {USB_DEVICE(0x04fc, 0x5330), BS(SPCA533, 0)},
+        {USB_DEVICE(0x04fc, 0x5360), BS(SPCA536, 0)},
+        {USB_DEVICE(0x04fc, 0xffff), BS(SPCA504B, 0)},
+        {USB_DEVICE(0x052b, 0x1513), BS(SPCA533, MegapixV4)},
+        {USB_DEVICE(0x0546, 0x3155), BS(SPCA533, 0)},
+        {USB_DEVICE(0x0546, 0x3191), BS(SPCA504B, 0)},
+        {USB_DEVICE(0x0546, 0x3273), BS(SPCA504B, 0)},
+        {USB_DEVICE(0x055f, 0xc211), BS(SPCA536, 0)},
+        {USB_DEVICE(0x055f, 0xc230), BS(SPCA533, 0)},
+        {USB_DEVICE(0x055f, 0xc232), BS(SPCA533, 0)},
+        {USB_DEVICE(0x055f, 0xc360), BS(SPCA536, 0)},
+        {USB_DEVICE(0x055f, 0xc420), BS(SPCA504, 0)},
+        {USB_DEVICE(0x055f, 0xc430), BS(SPCA533, 0)},
+        {USB_DEVICE(0x055f, 0xc440), BS(SPCA533, 0)},
+        {USB_DEVICE(0x055f, 0xc520), BS(SPCA504, 0)},
+        {USB_DEVICE(0x055f, 0xc530), BS(SPCA533, 0)},
+        {USB_DEVICE(0x055f, 0xc540), BS(SPCA533, 0)},
+        {USB_DEVICE(0x055f, 0xc630), BS(SPCA533, 0)},
+        {USB_DEVICE(0x055f, 0xc650), BS(SPCA533, 0)},
+        {USB_DEVICE(0x05da, 0x1018), BS(SPCA504B, 0)},
+        {USB_DEVICE(0x06d6, 0x0031), BS(SPCA533, 0)},
+        {USB_DEVICE(0x0733, 0x1311), BS(SPCA533, 0)},
+        {USB_DEVICE(0x0733, 0x1314), BS(SPCA533, 0)},
+        {USB_DEVICE(0x0733, 0x2211), BS(SPCA533, 0)},
+        {USB_DEVICE(0x0733, 0x2221), BS(SPCA533, 0)},
+        {USB_DEVICE(0x0733, 0x3261), BS(SPCA536, 0)},
+        {USB_DEVICE(0x0733, 0x3281), BS(SPCA536, 0)},
+        {USB_DEVICE(0x08ca, 0x0104), BS(SPCA533, 0)},
+        {USB_DEVICE(0x08ca, 0x0106), BS(SPCA533, 0)},
+        {USB_DEVICE(0x08ca, 0x2008), BS(SPCA504B, 0)},
+        {USB_DEVICE(0x08ca, 0x2010), BS(SPCA533, 0)},
+        {USB_DEVICE(0x08ca, 0x2016), BS(SPCA504B, 0)},
+        {USB_DEVICE(0x08ca, 0x2018), BS(SPCA504B, 0)},
+        {USB_DEVICE(0x08ca, 0x2020), BS(SPCA533, 0)},
+        {USB_DEVICE(0x08ca, 0x2022), BS(SPCA533, 0)},
+        {USB_DEVICE(0x08ca, 0x2024), BS(SPCA536, 0)},
+        {USB_DEVICE(0x08ca, 0x2028), BS(SPCA533, 0)},
+        {USB_DEVICE(0x08ca, 0x2040), BS(SPCA536, 0)},
+        {USB_DEVICE(0x08ca, 0x2042), BS(SPCA536, 0)},
+        {USB_DEVICE(0x08ca, 0x2050), BS(SPCA536, 0)},
+        {USB_DEVICE(0x08ca, 0x2060), BS(SPCA536, 0)},
+        {USB_DEVICE(0x0d64, 0x0303), BS(SPCA536, 0)},
         {}
 };
 MODULE_DEVICE_TABLE(usb, device_table);
@@ -1664,7 +1463,7 @@ static int __init sd_mod_init(void)
 {
         if (usb_register(&sd_driver) < 0)
                 return -1;
-        PDEBUG(D_PROBE, "v%s registered", version);
+        PDEBUG(D_PROBE, "registered");
         return 0;
 }
 static void __exit sd_mod_exit(void)
diff --git a/drivers/media/video/gspca/t613.c b/drivers/media/video/gspca/t613.c
index 00f47e463a05..91b555c34c68 100644
--- a/drivers/media/video/gspca/t613.c
+++ b/drivers/media/video/gspca/t613.c
@@ -1,12 +1,4 @@
 /*
- *Notes: * t613  + tas5130A
- *      * Focus to light do not balance well as in win.
- *        Quality in win is not good, but its kinda better.
- *       * Fix some "extraneous bytes", most of apps will show the image anyway
- *       * Gamma table, is there, but its really doing something?
- *       * 7~8 Fps, its ok, max on win its 10.
- *                      Costantino Leandro
- *
  * V4L2 by Jean-Francois Moine <http://moinejf.free.fr>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -22,16 +14,22 @@
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ *Notes: * t613  + tas5130A
+ *      * Focus to light do not balance well as in win.
+ *        Quality in win is not good, but its kinda better.
+ *       * Fix some "extraneous bytes", most of apps will show the image anyway
+ *       * Gamma table, is there, but its really doing something?
+ *       * 7~8 Fps, its ok, max on win its 10.
+ *                      Costantino Leandro
  */
 
 #define MODULE_NAME "t613"
+
 #include "gspca.h"
-#define DRIVER_VERSION_NUMBER   KERNEL_VERSION(2, 1, 7)
-static const char version[] = "2.1.7";
 
 #define MAX_GAMMA 0x10          /* 0 to 15 */
 
-/* From LUVCVIEW */
 #define V4L2_CID_EFFECTS (V4L2_CID_PRIVATE_BASE + 3)
 
 MODULE_AUTHOR("Leandro Costantino <le_costantino@pixartargentina.com.ar>");
@@ -424,7 +422,6 @@ static int sd_config(struct gspca_dev *gspca_dev,
         struct cam *cam;
 
         cam = &gspca_dev->cam;
-        cam->dev_name = (char *) id->driver_info;
         cam->epaddr = 0x01;
 
         cam->cam_mode = vga_mode_t16;
@@ -998,9 +995,8 @@ static const struct sd_desc sd_desc = {
 };
 
 /* -- module initialisation -- */
-#define DVNM(name) .driver_info = (kernel_ulong_t) name
 static const __devinitdata struct usb_device_id device_table[] = {
-        {USB_DEVICE(0x17a1, 0x0128), DVNM("XPX Webcam")},
+        {USB_DEVICE(0x17a1, 0x0128)},
         {}
 };
 MODULE_DEVICE_TABLE(usb, device_table);
@@ -1025,7 +1021,7 @@ static int __init sd_mod_init(void)
 {
         if (usb_register(&sd_driver) < 0)
                 return -1;
-        PDEBUG(D_PROBE, "v%s registered", version);
+        PDEBUG(D_PROBE, "registered");
         return 0;
 }
 static void __exit sd_mod_exit(void)
diff --git a/drivers/media/video/gspca/tv8532.c b/drivers/media/video/gspca/tv8532.c
index 0b793899095f..1ff8ba2f7fe5 100644
--- a/drivers/media/video/gspca/tv8532.c
+++ b/drivers/media/video/gspca/tv8532.c
@@ -22,9 +22,6 @@
 
 #include "gspca.h"
 
-#define DRIVER_VERSION_NUMBER   KERNEL_VERSION(2, 1, 7)
-static const char version[] = "2.1.7";
-
 MODULE_AUTHOR("Michel Xhaard <mxhaard@users.sourceforge.net>");
 MODULE_DESCRIPTION("TV8532 USB Camera Driver");
 MODULE_LICENSE("GPL");
@@ -249,7 +246,6 @@ static int sd_config(struct gspca_dev *gspca_dev,
         tv_8532WriteEEprom(gspca_dev);
 
         cam = &gspca_dev->cam;
-        cam->dev_name = (char *) id->driver_info;
         cam->epaddr = 1;
         cam->cam_mode = sif_mode;
         cam->nmodes = sizeof sif_mode / sizeof sif_mode[0];
@@ -624,13 +620,12 @@ static const struct sd_desc sd_desc = {
 };
 
 /* -- module initialisation -- */
-#define DVNM(name) .driver_info = (kernel_ulong_t) name
 static const __devinitdata struct usb_device_id device_table[] = {
-        {USB_DEVICE(0x046d, 0x0920), DVNM("QC Express")},
-        {USB_DEVICE(0x046d, 0x0921), DVNM("Labtec Webcam")},
-        {USB_DEVICE(0x0545, 0x808b), DVNM("Veo Stingray")},
-        {USB_DEVICE(0x0545, 0x8333), DVNM("Veo Stingray")},
-        {USB_DEVICE(0x0923, 0x010f), DVNM("ICM532 cams")},
+        {USB_DEVICE(0x046d, 0x0920)},
+        {USB_DEVICE(0x046d, 0x0921)},
+        {USB_DEVICE(0x0545, 0x808b)},
+        {USB_DEVICE(0x0545, 0x8333)},
+        {USB_DEVICE(0x0923, 0x010f)},
         {}
 };
 
@@ -656,7 +651,7 @@ static int __init sd_mod_init(void)
 {
         if (usb_register(&sd_driver) < 0)
                 return -1;
-        PDEBUG(D_PROBE, "v%s registered", version);
+        PDEBUG(D_PROBE, "registered");
         return 0;
 }
 
diff --git a/drivers/media/video/gspca/vc032x.c b/drivers/media/video/gspca/vc032x.c
index fcf2c9e32573..a4221753e1bf 100644
--- a/drivers/media/video/gspca/vc032x.c
+++ b/drivers/media/video/gspca/vc032x.c
@@ -24,9 +24,6 @@
 
 #include "gspca.h"
 
-#define DRIVER_VERSION_NUMBER   KERNEL_VERSION(2, 1, 7)
-static const char version[] = "2.1.7";
-
 MODULE_AUTHOR("Michel Xhaard <mxhaard@users.sourceforge.net>");
 MODULE_DESCRIPTION("GSPCA/VC032X USB Camera Driver");
 MODULE_LICENSE("GPL");
@@ -1419,30 +1416,10 @@ static int sd_config(struct gspca_dev *gspca_dev,
         struct usb_device *dev = gspca_dev->dev;
         struct cam *cam;
         int sensor;
-        __u16 product;
-
-        product = id->idProduct;
-        sd->bridge = BRIDGE_VC0321;
-        switch (id->idVendor) {
-        case 0x0ac8:            /* Vimicro z-star */
-                switch (product) {
-                case 0x0323:
-                        sd->bridge = BRIDGE_VC0323;
-                        break;
-                }
-                break;
-        case 0x17ef:            /* Lenovo */
-/*              switch (product) { */
-/*              case 0x4802:     * Lenovo MI1310_SOC */
-                        sd->bridge = BRIDGE_VC0323;
-/*                      break; */
-/*              } */
-                break;
-        }
 
         cam = &gspca_dev->cam;
-        cam->dev_name = (char *) id->driver_info;
         cam->epaddr = 0x02;
+        sd->bridge = id->driver_info;
         if (sd->bridge == BRIDGE_VC0321) {
                 cam->cam_mode = vc0321_mode;
                 cam->nmodes = ARRAY_SIZE(vc0321_mode);
@@ -1771,16 +1748,15 @@ static const struct sd_desc sd_desc = {
 };
 
 /* -- module initialisation -- */
-#define DVNM(name) .driver_info = (kernel_ulong_t) name
 static const __devinitdata struct usb_device_id device_table[] = {
-        {USB_DEVICE(0x046d, 0x0892), DVNM("Logitech Orbicam")},
-        {USB_DEVICE(0x046d, 0x0896), DVNM("Logitech Orbicam")},
-        {USB_DEVICE(0x0ac8, 0x0321), DVNM("Vimicro generic vc0321")},
-        {USB_DEVICE(0x0ac8, 0x0323), DVNM("Vimicro Vc0323")},
-        {USB_DEVICE(0x0ac8, 0x0328), DVNM("A4Tech PK-130MG")},
-        {USB_DEVICE(0x0ac8, 0xc001), DVNM("Sony embedded vimicro")},
-        {USB_DEVICE(0x0ac8, 0xc002), DVNM("Sony embedded vimicro")},
-        {USB_DEVICE(0x17ef, 0x4802), DVNM("Lenovo Vc0323+MI1310_SOC")},
+        {USB_DEVICE(0x046d, 0x0892), .driver_info = BRIDGE_VC0321},
+        {USB_DEVICE(0x046d, 0x0896), .driver_info = BRIDGE_VC0321},
+        {USB_DEVICE(0x0ac8, 0x0321), .driver_info = BRIDGE_VC0321},
+        {USB_DEVICE(0x0ac8, 0x0323), .driver_info = BRIDGE_VC0323},
+        {USB_DEVICE(0x0ac8, 0x0328), .driver_info = BRIDGE_VC0321},
+        {USB_DEVICE(0x0ac8, 0xc001), .driver_info = BRIDGE_VC0321},
+        {USB_DEVICE(0x0ac8, 0xc002), .driver_info = BRIDGE_VC0321},
+        {USB_DEVICE(0x17ef, 0x4802), .driver_info = BRIDGE_VC0323},
         {}
 };
 MODULE_DEVICE_TABLE(usb, device_table);
@@ -1805,7 +1781,7 @@ static int __init sd_mod_init(void)
 {
         if (usb_register(&sd_driver) < 0)
                 return -1;
-        PDEBUG(D_PROBE, "v%s registered", version);
+        PDEBUG(D_PROBE, "registered");
         return 0;
 }
 static void __exit sd_mod_exit(void)
diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c
index b761b11c5c6a..22a994ccb1d5 100644
--- a/drivers/media/video/gspca/zc3xx.c
+++ b/drivers/media/video/gspca/zc3xx.c
@@ -24,9 +24,6 @@
 
 #include "gspca.h"
 
-#define DRIVER_VERSION_NUMBER   KERNEL_VERSION(2, 1, 7)
-static const char version[] = "2.1.7";
-
 MODULE_AUTHOR("Michel Xhaard <mxhaard@users.sourceforge.net>, "
                 "Serge A. Suchkov <Serge.A.S@tochka.ru>");
 MODULE_DESCRIPTION("GSPCA ZC03xx/VC3xx USB Camera Driver");
@@ -49,7 +46,7 @@ struct sd {
         __u8 sharpness;
 
         char qindex;
-        char sensor;                    /* Type of image sensor chip */
+        signed char sensor;             /* Type of image sensor chip */
 /* !! values used in different tables */
 #define SENSOR_CS2102 0
 #define SENSOR_CS2102K 1
@@ -2205,10 +2202,10 @@ static const struct usb_action hdcs2020xb_InitialScale[] = {
 };
 static const struct usb_action hdcs2020b_50HZ[] = {
         {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS}, /* 00,19,00,cc */
-        {0xaa, 0x13, 0x0018}, /* 00,13,18,aa */
-        {0xaa, 0x14, 0x0001}, /* 00,14,01,aa */
-        {0xaa, 0x0e, 0x0005}, /* 00,0e,05,aa */
-        {0xaa, 0x19, 0x001f}, /* 00,19,1f,aa */
+        {0xaa, 0x13, 0x0018},                   /* 00,13,18,aa */
+        {0xaa, 0x14, 0x0001},                   /* 00,14,01,aa */
+        {0xaa, 0x0e, 0x0005},                   /* 00,0e,05,aa */
+        {0xaa, 0x19, 0x001f},                   /* 00,19,1f,aa */
         {0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH}, /* 01,90,00,cc */
         {0xa0, 0x02, ZC3XX_R191_EXPOSURELIMITMID}, /* 01,91,02,cc */
         {0xa0, 0x76, ZC3XX_R192_EXPOSURELIMITLOW}, /* 01,92,76,cc */
@@ -2226,10 +2223,10 @@ static const struct usb_action hdcs2020b_50HZ[] = {
 };
 static const struct usb_action hdcs2020b_60HZ[] = {
         {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS}, /* 00,19,00,cc */
-        {0xaa, 0x13, 0x0031}, /* 00,13,31,aa */
-        {0xaa, 0x14, 0x0001}, /* 00,14,01,aa */
-        {0xaa, 0x0e, 0x0004}, /* 00,0e,04,aa */
-        {0xaa, 0x19, 0x00cd}, /* 00,19,cd,aa */
+        {0xaa, 0x13, 0x0031},                   /* 00,13,31,aa */
+        {0xaa, 0x14, 0x0001},                   /* 00,14,01,aa */
+        {0xaa, 0x0e, 0x0004},                   /* 00,0e,04,aa */
+        {0xaa, 0x19, 0x00cd},                   /* 00,19,cd,aa */
         {0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH}, /* 01,90,00,cc */
         {0xa0, 0x02, ZC3XX_R191_EXPOSURELIMITMID}, /* 01,91,02,cc */
         {0xa0, 0x62, ZC3XX_R192_EXPOSURELIMITLOW}, /* 01,92,62,cc */
@@ -2247,10 +2244,10 @@ static const struct usb_action hdcs2020b_60HZ[] = {
 };
 static const struct usb_action hdcs2020b_NoFliker[] = {
         {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS}, /* 00,19,00,cc */
-        {0xaa, 0x13, 0x0010}, /* 00,13,10,aa */
-        {0xaa, 0x14, 0x0001}, /* 00,14,01,aa */
-        {0xaa, 0x0e, 0x0004}, /* 00,0e,04,aa */
-        {0xaa, 0x19, 0x0000}, /* 00,19,00,aa */
+        {0xaa, 0x13, 0x0010},                   /* 00,13,10,aa */
+        {0xaa, 0x14, 0x0001},                   /* 00,14,01,aa */
+        {0xaa, 0x0e, 0x0004},                   /* 00,0e,04,aa */
+        {0xaa, 0x19, 0x0000},                   /* 00,19,00,aa */
         {0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH}, /* 01,90,00,cc */
         {0xa0, 0x02, ZC3XX_R191_EXPOSURELIMITMID}, /* 01,91,02,cc */
         {0xa0, 0x70, ZC3XX_R192_EXPOSURELIMITLOW}, /* 01,92,70,cc */
@@ -4102,27 +4099,27 @@ static const struct usb_action pas106b_Initial_com[] = {
 
 static const struct usb_action pas106b_Initial[] = {    /* 176x144 */
 /* JPEG control */
-        {0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},          /* ClockSetting */
+        {0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},
 /* Sream and Sensor specific */
-        {0xa0, 0x0f, ZC3XX_R010_CMOSSENSORSELECT},      /* CMOSSensorSelect */
+        {0xa0, 0x0f, ZC3XX_R010_CMOSSENSORSELECT},
 /* Picture size */
-        {0xa0, 0x00, ZC3XX_R003_FRAMEWIDTHHIGH},  /* FrameWidthHigh 00 */
-        {0xa0, 0xb0, ZC3XX_R004_FRAMEWIDTHLOW},   /* FrameWidthLow B0 */
-        {0xa0, 0x00, ZC3XX_R005_FRAMEHEIGHTHIGH}, /* FrameHeightHigh 00 */
-        {0xa0, 0x90, ZC3XX_R006_FRAMEHEIGHTLOW},  /* FrameHightLow 90 */
+        {0xa0, 0x00, ZC3XX_R003_FRAMEWIDTHHIGH},
+        {0xa0, 0xb0, ZC3XX_R004_FRAMEWIDTHLOW},
+        {0xa0, 0x00, ZC3XX_R005_FRAMEHEIGHTHIGH},
+        {0xa0, 0x90, ZC3XX_R006_FRAMEHEIGHTLOW},
 /* System */
-        {0xa0, 0x01, ZC3XX_R001_SYSTEMOPERATING}, /* SystemOperating */
+        {0xa0, 0x01, ZC3XX_R001_SYSTEMOPERATING},
 /* Sream and Sensor specific */
-        {0xa0, 0x03, ZC3XX_R012_VIDEOCONTROLFUNC}, /* VideoControlFunction */
-        {0xa0, 0x01, ZC3XX_R012_VIDEOCONTROLFUNC}, /* VideoControlFunction */
+        {0xa0, 0x03, ZC3XX_R012_VIDEOCONTROLFUNC},
+        {0xa0, 0x01, ZC3XX_R012_VIDEOCONTROLFUNC},
 /* Sensor Interface */
-        {0xa0, 0x08, ZC3XX_R08D_COMPABILITYMODE},  /* Compatibily Mode */
+        {0xa0, 0x08, ZC3XX_R08D_COMPABILITYMODE},
 /* Window inside sensor array */
-        {0xa0, 0x03, ZC3XX_R09A_WINXSTARTLOW},  /* WinXStartLow */
-        {0xa0, 0x00, ZC3XX_R11A_FIRSTYLOW},     /* FirstYLow */
-        {0xa0, 0x03, ZC3XX_R11C_FIRSTXLOW},     /* FirstxLow */
-        {0xa0, 0x28, ZC3XX_R09C_WINHEIGHTLOW},  /* WinHeightLow */
-        {0xa0, 0x68, ZC3XX_R09E_WINWIDTHLOW},   /* WinWidthLow */
+        {0xa0, 0x03, ZC3XX_R09A_WINXSTARTLOW},
+        {0xa0, 0x00, ZC3XX_R11A_FIRSTYLOW},
+        {0xa0, 0x03, ZC3XX_R11C_FIRSTXLOW},
+        {0xa0, 0x28, ZC3XX_R09C_WINHEIGHTLOW},
+        {0xa0, 0x68, ZC3XX_R09E_WINWIDTHLOW},
 /* Init the sensor */
         {0xaa, 0x02, 0x0004},
         {0xaa, 0x08, 0x0000},
@@ -4135,40 +4132,40 @@ static const struct usb_action pas106b_Initial[] = {	/* 176x144 */
         {0xaa, 0x14, 0x0081},
 
 /* Other registors */
-        {0xa0, 0x37, ZC3XX_R101_SENSORCORRECTION}, /* SensorCorrection */
+        {0xa0, 0x37, ZC3XX_R101_SENSORCORRECTION},
 /* Frame retreiving */
-        {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS}, /* AutoAdjustFPS */
+        {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
 /* Gains */
-        {0xa0, 0xa0, ZC3XX_R1A8_DIGITALGAIN},   /* DigitalGain */
+        {0xa0, 0xa0, ZC3XX_R1A8_DIGITALGAIN},
 /* Unknown */
         {0xa0, 0x00, 0x01ad},
 /* Sharpness */
-        {0xa0, 0x03, ZC3XX_R1C5_SHARPNESSMODE}, /* SharpnessMode */
-        {0xa0, 0x13, ZC3XX_R1CB_SHARPNESS05},   /* Sharpness05 */
+        {0xa0, 0x03, ZC3XX_R1C5_SHARPNESSMODE},
+        {0xa0, 0x13, ZC3XX_R1CB_SHARPNESS05},
 /* Other registors */
-        {0xa0, 0x0d, ZC3XX_R100_OPERATIONMODE}, /* OperationMode */
+        {0xa0, 0x0d, ZC3XX_R100_OPERATIONMODE},
 /* Auto exposure and white balance */
-        {0xa0, 0x06, ZC3XX_R189_AWBSTATUS},     /* AWBStatus */
+        {0xa0, 0x06, ZC3XX_R189_AWBSTATUS},
 /*Dead pixels */
-        {0xa0, 0x08, ZC3XX_R250_DEADPIXELSMODE}, /* DeadPixelsMode */
+        {0xa0, 0x08, ZC3XX_R250_DEADPIXELSMODE},
 /* EEPROM */
-        {0xa0, 0x08, ZC3XX_R301_EEPROMACCESS},  /* EEPROMAccess */
+        {0xa0, 0x08, ZC3XX_R301_EEPROMACCESS},
 /* JPEG control */
-        {0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},  /* ClockSetting */
-        {0xa0, 0x08, ZC3XX_R1C6_SHARPNESS00},   /* sharpness+ */
-        {0xa0, 0x0f, ZC3XX_R1CB_SHARPNESS05},   /* sharpness- */
+        {0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},
+        {0xa0, 0x08, ZC3XX_R1C6_SHARPNESS00},
+        {0xa0, 0x0f, ZC3XX_R1CB_SHARPNESS05},
 /* Other registers */
-        {0xa0, 0x0d, ZC3XX_R100_OPERATIONMODE}, /* OperationMode */
+        {0xa0, 0x0d, ZC3XX_R100_OPERATIONMODE},
 /* Auto exposure and white balance */
-        {0xa0, 0x06, ZC3XX_R189_AWBSTATUS},     /* AWBStatus */
+        {0xa0, 0x06, ZC3XX_R189_AWBSTATUS},
 /*Dead pixels */
-        {0xa0, 0x08, ZC3XX_R250_DEADPIXELSMODE}, /* DeadPixelsMode */
+        {0xa0, 0x08, ZC3XX_R250_DEADPIXELSMODE},
 /* EEPROM */
-        {0xa0, 0x08, ZC3XX_R301_EEPROMACCESS},  /* EEPROMAccess */
+        {0xa0, 0x08, ZC3XX_R301_EEPROMACCESS},
 /* JPEG control */
-        {0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},  /* ClockSetting */
-        {0xa0, 0x08, ZC3XX_R1C6_SHARPNESS00},   /* sharpness+ */
-        {0xa0, 0x0f, ZC3XX_R1CB_SHARPNESS05},   /* sharpness- */
+        {0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},
+        {0xa0, 0x08, ZC3XX_R1C6_SHARPNESS00},
+        {0xa0, 0x0f, ZC3XX_R1CB_SHARPNESS05},
 
         {0xa0, 0x58, ZC3XX_R10A_RGB00}, /* matrix */
         {0xa0, 0xf4, ZC3XX_R10B_RGB01},
@@ -4180,67 +4177,67 @@ static const struct usb_action pas106b_Initial[] = {	/* 176x144 */
         {0xa0, 0xf4, ZC3XX_R111_RGB21},
         {0xa0, 0x58, ZC3XX_R112_RGB22},
 /* Auto correction */
-        {0xa0, 0x03, ZC3XX_R181_WINXSTART},     /* WinXstart */
-        {0xa0, 0x08, ZC3XX_R182_WINXWIDTH},     /* WinXWidth */
-        {0xa0, 0x16, ZC3XX_R183_WINXCENTER},    /* WinXCenter */
-        {0xa0, 0x03, ZC3XX_R184_WINYSTART},     /* WinYStart */
-        {0xa0, 0x05, ZC3XX_R185_WINYWIDTH},     /* WinYWidth */
-        {0xa0, 0x14, ZC3XX_R186_WINYCENTER},    /* WinYCenter */
-        {0xa0, 0x00, ZC3XX_R180_AUTOCORRECTENABLE}, /* AutoCorrectEnable */
+        {0xa0, 0x03, ZC3XX_R181_WINXSTART},
+        {0xa0, 0x08, ZC3XX_R182_WINXWIDTH},
+        {0xa0, 0x16, ZC3XX_R183_WINXCENTER},
+        {0xa0, 0x03, ZC3XX_R184_WINYSTART},
+        {0xa0, 0x05, ZC3XX_R185_WINYWIDTH},
+        {0xa0, 0x14, ZC3XX_R186_WINYCENTER},
+        {0xa0, 0x00, ZC3XX_R180_AUTOCORRECTENABLE},
 
 /* Auto exposure and white balance */
-        {0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH},     /* ExposureLimitHigh */
-        {0xa0, 0x03, ZC3XX_R191_EXPOSURELIMITMID},      /* ExposureLimitMid */
-        {0xa0, 0xb1, ZC3XX_R192_EXPOSURELIMITLOW},      /* ExposureLimitLow */
-        {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},       /* AntiFlickerHigh */
-        {0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID},        /* AntiFlickerLow */
-        {0xa0, 0x87, ZC3XX_R197_ANTIFLICKERLOW},        /* AntiFlickerLow */
-        {0xa0, 0x0c, ZC3XX_R18C_AEFREEZE},              /* AEBFreeze */
-        {0xa0, 0x18, ZC3XX_R18F_AEUNFREEZE},            /* AEBUnfreeze */
+        {0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH},
+        {0xa0, 0x03, ZC3XX_R191_EXPOSURELIMITMID},
+        {0xa0, 0xb1, ZC3XX_R192_EXPOSURELIMITLOW},
+        {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
+        {0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID},
+        {0xa0, 0x87, ZC3XX_R197_ANTIFLICKERLOW},
+        {0xa0, 0x0c, ZC3XX_R18C_AEFREEZE},
+        {0xa0, 0x18, ZC3XX_R18F_AEUNFREEZE},
 /* sensor on */
         {0xaa, 0x07, 0x00b1},
         {0xaa, 0x05, 0x0003},
         {0xaa, 0x04, 0x0001},
         {0xaa, 0x03, 0x003b},
 /* Gains */
-        {0xa0, 0x20, ZC3XX_R1A9_DIGITALLIMITDIFF},      /* DigitalLimitDiff */
-        {0xa0, 0x26, ZC3XX_R1AA_DIGITALGAINSTEP},       /* DigitalGainStep */
-        {0xa0, 0xa0, ZC3XX_R11D_GLOBALGAIN},            /* GlobalGain */
-        {0xa0, 0x60, ZC3XX_R11D_GLOBALGAIN},            /* GlobalGain */
+        {0xa0, 0x20, ZC3XX_R1A9_DIGITALLIMITDIFF},
+        {0xa0, 0x26, ZC3XX_R1AA_DIGITALGAINSTEP},
+        {0xa0, 0xa0, ZC3XX_R11D_GLOBALGAIN},
+        {0xa0, 0x60, ZC3XX_R11D_GLOBALGAIN},
 /* Auto correction */
-        {0xa0, 0x40, ZC3XX_R180_AUTOCORRECTENABLE},     /* AutoCorrectEnable */
+        {0xa0, 0x40, ZC3XX_R180_AUTOCORRECTENABLE},
         {0xa1, 0x01, 0x0180},                           /* AutoCorrectEnable */
-        {0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},     /* AutoCorrectEnable */
+        {0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
 /* Gains */
-        {0xa0, 0x40, ZC3XX_R116_RGAIN},                 /* RGain */
-        {0xa0, 0x40, ZC3XX_R117_GGAIN},                 /* GGain */
-        {0xa0, 0x40, ZC3XX_R118_BGAIN},                 /* BGain */
+        {0xa0, 0x40, ZC3XX_R116_RGAIN},
+        {0xa0, 0x40, ZC3XX_R117_GGAIN},
+        {0xa0, 0x40, ZC3XX_R118_BGAIN},
         {}
 };
 
 static const struct usb_action pas106b_InitialScale[] = {       /* 352x288 */
 /* JPEG control */
-        {0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},          /* ClockSetting */
+        {0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},
 /* Sream and Sensor specific */
-        {0xa0, 0x0f, ZC3XX_R010_CMOSSENSORSELECT},      /* CMOSSensorSelect */
+        {0xa0, 0x0f, ZC3XX_R010_CMOSSENSORSELECT},
 /* Picture size */
-        {0xa0, 0x01, ZC3XX_R003_FRAMEWIDTHHIGH},        /* FrameWidthHigh */
-        {0xa0, 0x60, ZC3XX_R004_FRAMEWIDTHLOW},         /* FrameWidthLow */
-        {0xa0, 0x01, ZC3XX_R005_FRAMEHEIGHTHIGH},       /* FrameHeightHigh */
-        {0xa0, 0x20, ZC3XX_R006_FRAMEHEIGHTLOW},        /* FrameHightLow */
+        {0xa0, 0x01, ZC3XX_R003_FRAMEWIDTHHIGH},
+        {0xa0, 0x60, ZC3XX_R004_FRAMEWIDTHLOW},
+        {0xa0, 0x01, ZC3XX_R005_FRAMEHEIGHTHIGH},
+        {0xa0, 0x20, ZC3XX_R006_FRAMEHEIGHTLOW},
 /* System */
-        {0xa0, 0x01, ZC3XX_R001_SYSTEMOPERATING},       /* SystemOperating */
+        {0xa0, 0x01, ZC3XX_R001_SYSTEMOPERATING},
 /* Sream and Sensor specific */
-        {0xa0, 0x03, ZC3XX_R012_VIDEOCONTROLFUNC}, /* VideoControlFunction */
-        {0xa0, 0x01, ZC3XX_R012_VIDEOCONTROLFUNC}, /* VideoControlFunction */
+        {0xa0, 0x03, ZC3XX_R012_VIDEOCONTROLFUNC},
+        {0xa0, 0x01, ZC3XX_R012_VIDEOCONTROLFUNC},
 /* Sensor Interface */
-        {0xa0, 0x08, ZC3XX_R08D_COMPABILITYMODE},       /* Compatibily Mode */
+        {0xa0, 0x08, ZC3XX_R08D_COMPABILITYMODE},
 /* Window inside sensor array */
-        {0xa0, 0x03, ZC3XX_R09A_WINXSTARTLOW},  /* WinXStartLow */
-        {0xa0, 0x00, ZC3XX_R11A_FIRSTYLOW},     /* FirstYLow */
-        {0xa0, 0x03, ZC3XX_R11C_FIRSTXLOW},     /* FirstxLow */
-        {0xa0, 0x28, ZC3XX_R09C_WINHEIGHTLOW},  /* WinHeightLow */
-        {0xa0, 0x68, ZC3XX_R09E_WINWIDTHLOW},   /* WinWidthLow */
+        {0xa0, 0x03, ZC3XX_R09A_WINXSTARTLOW},
+        {0xa0, 0x00, ZC3XX_R11A_FIRSTYLOW},
+        {0xa0, 0x03, ZC3XX_R11C_FIRSTXLOW},
+        {0xa0, 0x28, ZC3XX_R09C_WINHEIGHTLOW},
+        {0xa0, 0x68, ZC3XX_R09E_WINWIDTHLOW},
 /* Init the sensor */
         {0xaa, 0x02, 0x0004},
         {0xaa, 0x08, 0x0000},
@@ -4253,41 +4250,41 @@ static const struct usb_action pas106b_InitialScale[] = {	/* 352x288 */
         {0xaa, 0x14, 0x0081},
 
 /* Other registors */
-        {0xa0, 0x37, ZC3XX_R101_SENSORCORRECTION}, /* SensorCorrection */
+        {0xa0, 0x37, ZC3XX_R101_SENSORCORRECTION},
 /* Frame retreiving */
-        {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS}, /* AutoAdjustFPS */
+        {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
 /* Gains */
-        {0xa0, 0xa0, ZC3XX_R1A8_DIGITALGAIN},   /* DigitalGain */
+        {0xa0, 0xa0, ZC3XX_R1A8_DIGITALGAIN},
 /* Unknown */
         {0xa0, 0x00, 0x01ad},
 /* Sharpness */
-        {0xa0, 0x03, ZC3XX_R1C5_SHARPNESSMODE}, /* SharpnessMode */
-        {0xa0, 0x13, ZC3XX_R1CB_SHARPNESS05},   /* Sharpness05 */
+        {0xa0, 0x03, ZC3XX_R1C5_SHARPNESSMODE},
+        {0xa0, 0x13, ZC3XX_R1CB_SHARPNESS05},
 /* Other registors */
-        {0xa0, 0x0d, ZC3XX_R100_OPERATIONMODE}, /* OperationMode */
+        {0xa0, 0x0d, ZC3XX_R100_OPERATIONMODE},
 /* Auto exposure and white balance */
-        {0xa0, 0x06, ZC3XX_R189_AWBSTATUS},     /* AWBStatus */
-        {0xa0, 0x80, ZC3XX_R18D_YTARGET},       /* ????????? */
+        {0xa0, 0x06, ZC3XX_R189_AWBSTATUS},
+        {0xa0, 0x80, ZC3XX_R18D_YTARGET},
 /*Dead pixels */
-        {0xa0, 0x08, ZC3XX_R250_DEADPIXELSMODE}, /* DeadPixelsMode */
+        {0xa0, 0x08, ZC3XX_R250_DEADPIXELSMODE},
 /* EEPROM */
-        {0xa0, 0x08, ZC3XX_R301_EEPROMACCESS},  /* EEPROMAccess */
+        {0xa0, 0x08, ZC3XX_R301_EEPROMACCESS},
 /* JPEG control */
-        {0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},  /* ClockSetting */
-        {0xa0, 0x08, ZC3XX_R1C6_SHARPNESS00},   /* sharpness+ */
-        {0xa0, 0x0f, ZC3XX_R1CB_SHARPNESS05},   /* sharpness- */
+        {0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},
+        {0xa0, 0x08, ZC3XX_R1C6_SHARPNESS00},
+        {0xa0, 0x0f, ZC3XX_R1CB_SHARPNESS05},
 /* Other registers */
-        {0xa0, 0x0d, ZC3XX_R100_OPERATIONMODE}, /* OperationMode */
+        {0xa0, 0x0d, ZC3XX_R100_OPERATIONMODE},
 /* Auto exposure and white balance */
-        {0xa0, 0x06, ZC3XX_R189_AWBSTATUS},     /* AWBStatus */
+        {0xa0, 0x06, ZC3XX_R189_AWBSTATUS},
 /*Dead pixels */
-        {0xa0, 0x08, ZC3XX_R250_DEADPIXELSMODE}, /* DeadPixelsMode */
+        {0xa0, 0x08, ZC3XX_R250_DEADPIXELSMODE},
 /* EEPROM */
-        {0xa0, 0x08, ZC3XX_R301_EEPROMACCESS},  /* EEPROMAccess */
+        {0xa0, 0x08, ZC3XX_R301_EEPROMACCESS},
 /* JPEG control */
-        {0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},  /* ClockSetting */
-        {0xa0, 0x08, ZC3XX_R1C6_SHARPNESS00},   /* sharpness+ */
-        {0xa0, 0x0f, ZC3XX_R1CB_SHARPNESS05},   /* sharpness- */
+        {0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},
+        {0xa0, 0x08, ZC3XX_R1C6_SHARPNESS00},
+        {0xa0, 0x0f, ZC3XX_R1CB_SHARPNESS05},
 
         {0xa0, 0x58, ZC3XX_R10A_RGB00}, /* matrix */
         {0xa0, 0xf4, ZC3XX_R10B_RGB01},
@@ -4299,43 +4296,43 @@ static const struct usb_action pas106b_InitialScale[] = {	/* 352x288 */
         {0xa0, 0xf4, ZC3XX_R111_RGB21},
         {0xa0, 0x58, ZC3XX_R112_RGB22},
 /* Auto correction */
-        {0xa0, 0x03, ZC3XX_R181_WINXSTART},     /* WinXstart */
-        {0xa0, 0x08, ZC3XX_R182_WINXWIDTH},     /* WinXWidth */
-        {0xa0, 0x16, ZC3XX_R183_WINXCENTER},    /* WinXCenter */
-        {0xa0, 0x03, ZC3XX_R184_WINYSTART},     /* WinYStart */
-        {0xa0, 0x05, ZC3XX_R185_WINYWIDTH},     /* WinYWidth */
-        {0xa0, 0x14, ZC3XX_R186_WINYCENTER},    /* WinYCenter */
-        {0xa0, 0x00, ZC3XX_R180_AUTOCORRECTENABLE}, /* AutoCorrectEnable */
+        {0xa0, 0x03, ZC3XX_R181_WINXSTART},
+        {0xa0, 0x08, ZC3XX_R182_WINXWIDTH},
+        {0xa0, 0x16, ZC3XX_R183_WINXCENTER},
+        {0xa0, 0x03, ZC3XX_R184_WINYSTART},
+        {0xa0, 0x05, ZC3XX_R185_WINYWIDTH},
+        {0xa0, 0x14, ZC3XX_R186_WINYCENTER},
+        {0xa0, 0x00, ZC3XX_R180_AUTOCORRECTENABLE},
 
 /* Auto exposure and white balance */
-        {0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH}, /* ExposureLimitHigh 0 */
-        {0xa0, 0x03, ZC3XX_R191_EXPOSURELIMITMID},  /* ExposureLimitMid */
-        {0xa0, 0xb1, ZC3XX_R192_EXPOSURELIMITLOW},  /* ExposureLimitLow 0xb1 */
+        {0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH},
+        {0xa0, 0x03, ZC3XX_R191_EXPOSURELIMITMID},
+        {0xa0, 0xb1, ZC3XX_R192_EXPOSURELIMITLOW},
 
-        {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},   /* AntiFlickerHigh 0x00 */
-        {0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID},    /* AntiFlickerLow 0x00 */
-        {0xa0, 0x87, ZC3XX_R197_ANTIFLICKERLOW},    /* AntiFlickerLow 0x87 */
+        {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
+        {0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID},
+        {0xa0, 0x87, ZC3XX_R197_ANTIFLICKERLOW},
 
-        {0xa0, 0x10, ZC3XX_R18C_AEFREEZE},      /* AEBFreeze 0x10 0x0c */
-        {0xa0, 0x20, ZC3XX_R18F_AEUNFREEZE},    /* AEBUnfreeze 0x30 0x18 */
+        {0xa0, 0x10, ZC3XX_R18C_AEFREEZE},
+        {0xa0, 0x20, ZC3XX_R18F_AEUNFREEZE},
 /* sensor on */
         {0xaa, 0x07, 0x00b1},
         {0xaa, 0x05, 0x0003},
         {0xaa, 0x04, 0x0001},
         {0xaa, 0x03, 0x003b},
 /* Gains */
-        {0xa0, 0x20, ZC3XX_R1A9_DIGITALLIMITDIFF},      /* DigitalLimitDiff */
-        {0xa0, 0x26, ZC3XX_R1AA_DIGITALGAINSTEP},       /* DigitalGainStep */
-        {0xa0, 0xa0, ZC3XX_R11D_GLOBALGAIN},    /* GlobalGain */
-        {0xa0, 0x60, ZC3XX_R11D_GLOBALGAIN},    /* GlobalGain */
+        {0xa0, 0x20, ZC3XX_R1A9_DIGITALLIMITDIFF},
+        {0xa0, 0x26, ZC3XX_R1AA_DIGITALGAINSTEP},
+        {0xa0, 0xa0, ZC3XX_R11D_GLOBALGAIN},
+        {0xa0, 0x60, ZC3XX_R11D_GLOBALGAIN},
 /* Auto correction */
-        {0xa0, 0x40, ZC3XX_R180_AUTOCORRECTENABLE},     /* AutoCorrectEnable */
+        {0xa0, 0x40, ZC3XX_R180_AUTOCORRECTENABLE},
         {0xa1, 0x01, 0x0180},                           /* AutoCorrectEnable */
-        {0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},     /* AutoCorrectEnable */
+        {0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
 /* Gains */
-        {0xa0, 0x40, ZC3XX_R116_RGAIN},         /* RGain */
-        {0xa0, 0x40, ZC3XX_R117_GGAIN},         /* GGain */
-        {0xa0, 0x40, ZC3XX_R118_BGAIN},         /* BGain */
+        {0xa0, 0x40, ZC3XX_R116_RGAIN},
+        {0xa0, 0x40, ZC3XX_R117_GGAIN},
+        {0xa0, 0x40, ZC3XX_R118_BGAIN},
 
         {0xa0, 0x00, 0x0007},                   /* AutoCorrectEnable */
         {0xa0, 0xff, ZC3XX_R018_FRAMELOST},     /* Frame adjust */
@@ -4459,8 +4456,8 @@ static const struct usb_action pb03303x_Initial[] = {
         {0xa0, 0x50, ZC3XX_R112_RGB22},
 
         {0xa1, 0x01, 0x0008},
-        {0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},  /* clock ? */
-        {0xa0, 0x08, ZC3XX_R1C6_SHARPNESS00},   /* sharpness+ */
+        {0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},
+        {0xa0, 0x08, ZC3XX_R1C6_SHARPNESS00},
         {0xa1, 0x01, 0x01c8},
         {0xa1, 0x01, 0x01c9},
         {0xa1, 0x01, 0x01ca},
@@ -5984,7 +5981,7 @@ static const struct usb_action tas5130c_vf0250_Initial[] = {
         {0xaa, 0x1b, 0x0000},           /* 00,1b,00,aa, */
         {0xaa, 0x13, 0x0002},           /* 00,13,02,aa, */
         {0xaa, 0x15, 0x0004},           /* 00,15,04,aa */
-        {0xaa, 0x01, 0x0000},
+/*??    {0xaa, 0x01, 0x0000}, */
         {0xaa, 0x01, 0x0000},
         {0xaa, 0x1a, 0x0000},           /* 00,1a,00,aa, */
         {0xaa, 0x1c, 0x0017},           /* 00,1c,17,aa, */
@@ -6000,8 +5997,8 @@ static const struct usb_action tas5130c_vf0250_Initial[] = {
         {0xaa, 0x0f, 0x00a0},           /* 00,0f,a0,aa, */
         {0xaa, 0x10, 0x0000},           /* 00,10,00,aa, */
         {0xaa, 0x11, 0x00a0},           /* 00,11,a0,aa, */
-        {0xa0, 0x00, 0x0039},
-        {0xa1, 0x01, 0x0037},
+/*??    {0xa0, 0x00, 0x0039},
+        {0xa1, 0x01, 0x0037}, */
         {0xaa, 0x16, 0x0001},           /* 00,16,01,aa, */
         {0xaa, 0x17, 0x00e8},           /* 00,17,e6,aa, (e6 -> e8) */
         {0xaa, 0x18, 0x0002},           /* 00,18,02,aa, */
@@ -6272,7 +6269,7 @@ static void reg_w(struct usb_device *dev,
                         __u8 value,
                         __u16 index)
 {
-        PDEBUG(D_USBO, "reg w %02x -> [%04x]", value, index);
+        PDEBUG(D_USBO, "reg w [%04x] = %02x", index, value);
         reg_w_i(dev, value, index);
 }
 
@@ -6280,17 +6277,17 @@ static __u16 i2c_read(struct gspca_dev *gspca_dev,
                         __u8 reg)
 {
         __u8 retbyte;
-        __u8 retval[2];
+        __u16 retval;
 
         reg_w_i(gspca_dev->dev, reg, 0x92);
         reg_w_i(gspca_dev->dev, 0x02, 0x90);            /* <- read command */
         msleep(25);
         retbyte = reg_r_i(gspca_dev, 0x0091);           /* read status */
-        retval[0] = reg_r_i(gspca_dev, 0x0095);         /* read Lowbyte */
-        retval[1] = reg_r_i(gspca_dev, 0x0096);         /* read Hightbyte */
-        PDEBUG(D_USBO, "i2c r [%02x] -> (%02x) %02x%02x",
-                        reg, retbyte, retval[1], retval[0]);
-        return (retval[1] << 8) | retval[0];
+        retval = reg_r_i(gspca_dev, 0x0095);            /* read Lowbyte */
+        retval |= reg_r_i(gspca_dev, 0x0096) << 8;      /* read Hightbyte */
+        PDEBUG(D_USBO, "i2c r [%02x] -> %04x (%02x)",
+                        reg, retval, retbyte);
+        return retval;
 }
 
 static __u8 i2c_write(struct gspca_dev *gspca_dev,
@@ -6306,7 +6303,7 @@ static __u8 i2c_write(struct gspca_dev *gspca_dev,
         reg_w_i(gspca_dev->dev, 0x01, 0x90);            /* <- write command */
         msleep(5);
         retbyte = reg_r_i(gspca_dev, 0x0091);           /* read status */
-        PDEBUG(D_USBO, "i2c w [%02x] %02x%02x (%02x)",
+        PDEBUG(D_USBO, "i2c w [%02x] = %02x%02x (%02x)",
                         reg, valH, valL, retbyte);
         return retbyte;
 }
@@ -6349,6 +6346,8 @@ static void setmatrix(struct gspca_dev *gspca_dev)
                 {0x58, 0xf4, 0xf4, 0xf4, 0x58, 0xf4, 0xf4, 0xf4, 0x58};
         static const __u8 po2030_matrix[9] =
                 {0x60, 0xf0, 0xf0, 0xf0, 0x60, 0xf0, 0xf0, 0xf0, 0x60};
+        static const __u8 vf0250_matrix[9] =
+                {0x7b, 0xea, 0xea, 0xea, 0x7b, 0xea, 0xea, 0xea, 0x7b};
 
         switch (sd->sensor) {
         case SENSOR_GC0305:
@@ -6363,8 +6362,9 @@ static void setmatrix(struct gspca_dev *gspca_dev)
         case SENSOR_PO2030:
                 matrix = po2030_matrix;
                 break;
-        case SENSOR_TAS5130C_VF0250:    /* no matrix? */
-                return;
+        case SENSOR_TAS5130C_VF0250:
+                matrix = vf0250_matrix;
+                break;
         default:                /* matrix already loaded */
                 return;
         }
@@ -6744,7 +6744,7 @@ static int vga_2wr_probe(struct gspca_dev *gspca_dev)
                 return 0x04;                    /* CS2102 */
 
         start_2wr_probe(dev, 0x06);             /* OmniVision */
-        reg_w(dev, 0x08, 0x8d);
+        reg_w(dev, 0x08, 0x008d);
         i2c_write(gspca_dev, 0x11, 0xaa, 0x00);
         retbyte = i2c_read(gspca_dev, 0x11);
         if (retbyte != 0) {
@@ -6778,7 +6778,7 @@ static int vga_2wr_probe(struct gspca_dev *gspca_dev)
                 return 0x0c;                    /* ICM105A */
 
         start_2wr_probe(dev, 0x0e);             /* PAS202BCB */
-        reg_w(dev, 0x08, 0x8d);
+        reg_w(dev, 0x08, 0x008d);
         i2c_write(gspca_dev, 0x03, 0xaa, 0x00);
         msleep(500);
         retbyte = i2c_read(gspca_dev, 0x03);
@@ -6830,7 +6830,6 @@ static const struct sensor_by_chipset_revision chipset_revision_sensor[] = {
         {0x8001, 0x13},
         {0x8000, 0x14},         /* CS2102K */
         {0x8400, 0x15},         /* TAS5130K */
-        {0, 0}
 };
 
 static int vga_3wr_probe(struct gspca_dev *gspca_dev)
@@ -6843,7 +6842,7 @@ static int vga_3wr_probe(struct gspca_dev *gspca_dev)
 
 /*fixme: lack of 8b=b3 (11,12)-> 10, 8b=e0 (14,15,16)-> 12 found in gspcav1*/
         reg_w(dev, 0x02, 0x0010);
-        reg_r(gspca_dev, 0x10);
+        reg_r(gspca_dev, 0x0010);
         reg_w(dev, 0x01, 0x0000);
         reg_w(dev, 0x00, 0x0010);
         reg_w(dev, 0x01, 0x0001);
@@ -6869,17 +6868,15 @@ static int vga_3wr_probe(struct gspca_dev *gspca_dev)
         PDEBUG(D_PROBE, "probe 3wr vga 1 0x%04x", checkword);
         reg_r(gspca_dev, 0x0010);
         /* this is tested only once anyway */
-        i = 0;
-        while (chipset_revision_sensor[i].revision) {
+        for (i = 0; i < ARRAY_SIZE(chipset_revision_sensor); i++) {
                 if (chipset_revision_sensor[i].revision == checkword) {
                         sd->chip_revision = checkword;
                         send_unknown(dev, SENSOR_PB0330);
                         return chipset_revision_sensor[i].internal_sensor_id;
                 }
-                i++;
         }
 
-        reg_w(dev, 0x01, 0x0000);
+        reg_w(dev, 0x01, 0x0000);       /* check ?? */
         reg_w(dev, 0x01, 0x0001);
         reg_w(dev, 0xdd, 0x008b);
         reg_w(dev, 0x0a, 0x0010);
@@ -6901,8 +6898,11 @@ static int vga_3wr_probe(struct gspca_dev *gspca_dev)
         retbyte = i2c_read(gspca_dev, 0x00);
         if (retbyte != 0) {
                 PDEBUG(D_PROBE, "probe 3wr vga type %02x", retbyte);
-                send_unknown(dev, SENSOR_GC0305);
-                return retbyte;         /* 0x29 = gc0305 - should continue? */
+                if (retbyte == 0x11)                    /* VF0250 */
+                        return 0x0250;
+                if (retbyte == 0x29)                    /* gc0305 */
+                        send_unknown(dev, SENSOR_GC0305);
+                return retbyte;
         }
 
         reg_w(dev, 0x01, 0x0000);       /* check OmniVision */
@@ -6918,18 +6918,18 @@ static int vga_3wr_probe(struct gspca_dev *gspca_dev)
                 return 0x06;            /* OmniVision confirm ? */
         }
 
-        reg_w(dev, 0x01, 0x00);
-        reg_w(dev, 0x00, 0x02);
-        reg_w(dev, 0x01, 0x10);
-        reg_w(dev, 0x01, 0x01);
-        reg_w(dev, 0xee, 0x8b);
-        reg_w(dev, 0x03, 0x12);
+        reg_w(dev, 0x01, 0x0000);
+        reg_w(dev, 0x00, 0x0002);
+        reg_w(dev, 0x01, 0x0010);
+        reg_w(dev, 0x01, 0x0001);
+        reg_w(dev, 0xee, 0x008b);
+        reg_w(dev, 0x03, 0x0012);
 /*      msleep(150); */
-        reg_w(dev, 0x01, 0x12);
-        reg_w(dev, 0x05, 0x12);
-        retbyte = i2c_read(gspca_dev, 0x00);            /* ID 0 */
+        reg_w(dev, 0x01, 0x0012);
+        reg_w(dev, 0x05, 0x0012);
+        retbyte = i2c_read(gspca_dev, 0x0000);          /* ID 0 */
         checkword = retbyte << 8;
-        retbyte = i2c_read(gspca_dev, 0x01);            /* ID 1 */
+        retbyte = i2c_read(gspca_dev, 0x0001);          /* ID 1 */
         checkword |= retbyte;
         PDEBUG(D_PROBE, "probe 3wr vga 2 0x%04x", checkword);
         if (checkword == 0x2030) {
@@ -6939,14 +6939,14 @@ static int vga_3wr_probe(struct gspca_dev *gspca_dev)
                 return checkword;
         }
 
-        reg_w(dev, 0x01, 0x00);
-        reg_w(dev, 0x0a, 0x10);
-        reg_w(dev, 0xd3, 0x8b);
-        reg_w(dev, 0x01, 0x01);
-        reg_w(dev, 0x03, 0x12);
-        reg_w(dev, 0x01, 0x12);
-        reg_w(dev, 0x05, 0x01);
-        reg_w(dev, 0xd3, 0x8b);
+        reg_w(dev, 0x01, 0x0000);
+        reg_w(dev, 0x0a, 0x0010);
+        reg_w(dev, 0xd3, 0x008b);
+        reg_w(dev, 0x01, 0x0001);
+        reg_w(dev, 0x03, 0x0012);
+        reg_w(dev, 0x01, 0x0012);
+        reg_w(dev, 0x05, 0x0001);
+        reg_w(dev, 0xd3, 0x008b);
         retbyte = i2c_read(gspca_dev, 0x01);
         if (retbyte != 0) {
                 PDEBUG(D_PROBE, "probe 3wr vga type 0a ?");
@@ -6962,7 +6962,9 @@ static int zcxx_probeSensor(struct gspca_dev *gspca_dev)
 
         switch (sd->sensor) {
         case SENSOR_MC501CB:
+                return -1;              /* don't probe */
         case SENSOR_TAS5130C_VF0250:
+                                /* may probe but with write in reg 0x0010 */
                 return -1;              /* don't probe */
         }
         sensor = vga_2wr_probe(gspca_dev);
@@ -7010,30 +7012,7 @@ static int sd_config(struct gspca_dev *gspca_dev,
 
         /* define some sensors from the vendor/product */
         sd->sharpness = 2;
-        switch (id->idVendor) {
-        case 0x041e:                            /* Creative */
-                switch (id->idProduct) {
-                case 0x4051:                    /* zc301 chips */
-                case 0x4053:
-                        sd->sensor = SENSOR_TAS5130C_VF0250;
-                        break;
-                }
-                break;
-        case 0x046d:                            /* Logitech Labtec */
-                switch (id->idProduct) {
-                case 0x08dd:
-                        sd->sensor = SENSOR_MC501CB;
-                        break;
-                }
-                break;
-        case 0x0ac8:                            /* Vimicro z-star */
-                switch (id->idProduct) {
-                case 0x305b:
-                        sd->sensor = SENSOR_TAS5130C_VF0250;
-                        break;
-                }
-                break;
-        }
+        sd->sensor = id->driver_info;
         sensor = zcxx_probeSensor(gspca_dev);
         if (sensor >= 0)
                 PDEBUG(D_PROBE, "probe sensor -> %02x", sensor);
@@ -7119,6 +7098,10 @@ static int sd_config(struct gspca_dev *gspca_dev,
                         PDEBUG(D_PROBE, "Find Sensor GC0305");
                         sd->sensor = SENSOR_GC0305;
                         break;
+                case 0x0250:
+                        PDEBUG(D_PROBE, "Sensor Tas5130 (VF0250)");
+                        sd->sensor =  SENSOR_TAS5130C_VF0250;
+                        break;
                 case 0x2030:
                         PDEBUG(D_PROBE, "Find Sensor PO2030");
                         sd->sensor = SENSOR_PO2030;
@@ -7146,7 +7129,6 @@ static int sd_config(struct gspca_dev *gspca_dev,
         }
 
         cam = &gspca_dev->cam;
-        cam->dev_name = (char *) id->driver_info;
         cam->epaddr = 0x01;
 /*fixme:test*/
         gspca_dev->nbalt--;
@@ -7235,6 +7217,7 @@ static void sd_start(struct gspca_dev *gspca_dev)
         case SENSOR_GC0305:
         case SENSOR_OV7620:
         case SENSOR_PO2030:
+        case SENSOR_TAS5130C_VF0250:
                 msleep(100);                    /* ?? */
                 reg_r(gspca_dev, 0x0002);       /* --> 0x40 */
                 reg_w(dev, 0x09, 0x01ad);       /* (from win traces) */
@@ -7515,70 +7498,69 @@ static const struct sd_desc sd_desc = {
         .querymenu = sd_querymenu,
 };
 
-#define DVNM(name) .driver_info = (kernel_ulong_t) name
 static const __devinitdata struct usb_device_id device_table[] = {
-        {USB_DEVICE(0x041e, 0x041e), DVNM("Creative WebCam Live!")},
+        {USB_DEVICE(0x041e, 0x041e)},
 #ifndef CONFIG_USB_ZC0301
-        {USB_DEVICE(0x041e, 0x4017), DVNM("Creative Webcam Mobile PD1090")},
-        {USB_DEVICE(0x041e, 0x401c), DVNM("Creative NX")},
-        {USB_DEVICE(0x041e, 0x401e), DVNM("Creative Nx Pro")},
-        {USB_DEVICE(0x041e, 0x401f), DVNM("Creative Webcam Notebook PD1171")},
+        {USB_DEVICE(0x041e, 0x4017)},
+        {USB_DEVICE(0x041e, 0x401c)},
+        {USB_DEVICE(0x041e, 0x401e)},
+        {USB_DEVICE(0x041e, 0x401f)},
 #endif
-        {USB_DEVICE(0x041e, 0x4029), DVNM("Creative WebCam Vista Pro")},
+        {USB_DEVICE(0x041e, 0x4029)},
 #ifndef CONFIG_USB_ZC0301
-        {USB_DEVICE(0x041e, 0x4034), DVNM("Creative Instant P0620")},
-        {USB_DEVICE(0x041e, 0x4035), DVNM("Creative Instant P0620D")},
-        {USB_DEVICE(0x041e, 0x4036), DVNM("Creative Live !")},
-        {USB_DEVICE(0x041e, 0x403a), DVNM("Creative Nx Pro 2")},
+        {USB_DEVICE(0x041e, 0x4034)},
+        {USB_DEVICE(0x041e, 0x4035)},
+        {USB_DEVICE(0x041e, 0x4036)},
+        {USB_DEVICE(0x041e, 0x403a)},
 #endif
-        {USB_DEVICE(0x041e, 0x4051), DVNM("Creative Notebook Pro (VF0250)")},
-        {USB_DEVICE(0x041e, 0x4053), DVNM("Creative Live!Cam Video IM")},
+        {USB_DEVICE(0x041e, 0x4051), .driver_info = SENSOR_TAS5130C_VF0250},
+        {USB_DEVICE(0x041e, 0x4053), .driver_info = SENSOR_TAS5130C_VF0250},
 #ifndef CONFIG_USB_ZC0301
-        {USB_DEVICE(0x0458, 0x7007), DVNM("Genius VideoCam V2")},
-        {USB_DEVICE(0x0458, 0x700c), DVNM("Genius VideoCam V3")},
-        {USB_DEVICE(0x0458, 0x700f), DVNM("Genius VideoCam Web V2")},
+        {USB_DEVICE(0x0458, 0x7007)},
+        {USB_DEVICE(0x0458, 0x700c)},
+        {USB_DEVICE(0x0458, 0x700f)},
 #endif
-        {USB_DEVICE(0x0461, 0x0a00), DVNM("MicroInnovation WebCam320")},
-        {USB_DEVICE(0x046d, 0x08a0), DVNM("Logitech QC IM")},
-        {USB_DEVICE(0x046d, 0x08a1), DVNM("Logitech QC IM 0x08A1 +sound")},
-        {USB_DEVICE(0x046d, 0x08a2), DVNM("Labtec Webcam Pro")},
-        {USB_DEVICE(0x046d, 0x08a3), DVNM("Logitech QC Chat")},
-        {USB_DEVICE(0x046d, 0x08a6), DVNM("Logitech QCim")},
-        {USB_DEVICE(0x046d, 0x08a7), DVNM("Logitech QuickCam Image")},
-        {USB_DEVICE(0x046d, 0x08a9), DVNM("Logitech Notebook Deluxe")},
-        {USB_DEVICE(0x046d, 0x08aa), DVNM("Labtec Webcam Notebook")},
-        {USB_DEVICE(0x046d, 0x08ac), DVNM("Logitech QuickCam Cool")},
-        {USB_DEVICE(0x046d, 0x08ad), DVNM("Logitech QCCommunicate STX")},
+        {USB_DEVICE(0x0461, 0x0a00)},
+        {USB_DEVICE(0x046d, 0x08a0)},
+        {USB_DEVICE(0x046d, 0x08a1)},
+        {USB_DEVICE(0x046d, 0x08a2)},
+        {USB_DEVICE(0x046d, 0x08a3)},
+        {USB_DEVICE(0x046d, 0x08a6)},
+        {USB_DEVICE(0x046d, 0x08a7)},
+        {USB_DEVICE(0x046d, 0x08a9)},
+        {USB_DEVICE(0x046d, 0x08aa)},
+        {USB_DEVICE(0x046d, 0x08ac)},
+        {USB_DEVICE(0x046d, 0x08ad)},
 #ifndef CONFIG_USB_ZC0301
-        {USB_DEVICE(0x046d, 0x08ae), DVNM("Logitech QuickCam for Notebooks")},
+        {USB_DEVICE(0x046d, 0x08ae)},
 #endif
-        {USB_DEVICE(0x046d, 0x08af), DVNM("Logitech QuickCam Cool")},
-        {USB_DEVICE(0x046d, 0x08b9), DVNM("Logitech QC IM ???")},
-        {USB_DEVICE(0x046d, 0x08d7), DVNM("Logitech QCam STX")},
-        {USB_DEVICE(0x046d, 0x08d9), DVNM("Logitech QuickCam IM/Connect")},
-        {USB_DEVICE(0x046d, 0x08d8), DVNM("Logitech Notebook Deluxe")},
-        {USB_DEVICE(0x046d, 0x08da), DVNM("Logitech QuickCam Messenger")},
-        {USB_DEVICE(0x046d, 0x08dd), DVNM("Logitech QuickCam for Notebooks")},
-        {USB_DEVICE(0x0471, 0x0325), DVNM("Philips SPC 200 NC")},
-        {USB_DEVICE(0x0471, 0x0326), DVNM("Philips SPC 300 NC")},
-        {USB_DEVICE(0x0471, 0x032d), DVNM("Philips spc210nc")},
-        {USB_DEVICE(0x0471, 0x032e), DVNM("Philips spc315nc")},
-        {USB_DEVICE(0x055f, 0xc005), DVNM("Mustek Wcam300A")},
+        {USB_DEVICE(0x046d, 0x08af)},
+        {USB_DEVICE(0x046d, 0x08b9)},
+        {USB_DEVICE(0x046d, 0x08d7)},
+        {USB_DEVICE(0x046d, 0x08d9)},
+        {USB_DEVICE(0x046d, 0x08d8)},
+        {USB_DEVICE(0x046d, 0x08da)},
+        {USB_DEVICE(0x046d, 0x08dd), .driver_info = SENSOR_MC501CB},
+        {USB_DEVICE(0x0471, 0x0325)},
+        {USB_DEVICE(0x0471, 0x0326)},
+        {USB_DEVICE(0x0471, 0x032d)},
+        {USB_DEVICE(0x0471, 0x032e)},
+        {USB_DEVICE(0x055f, 0xc005)},
 #ifndef CONFIG_USB_ZC0301
-        {USB_DEVICE(0x055f, 0xd003), DVNM("Mustek WCam300A")},
-        {USB_DEVICE(0x055f, 0xd004), DVNM("Mustek WCam300 AN")},
+        {USB_DEVICE(0x055f, 0xd003)},
+        {USB_DEVICE(0x055f, 0xd004)},
 #endif
-        {USB_DEVICE(0x0698, 0x2003), DVNM("CTX M730V built in")},
-        {USB_DEVICE(0x0ac8, 0x0302), DVNM("Z-star Vimicro zc0302")},
+        {USB_DEVICE(0x0698, 0x2003)},
+        {USB_DEVICE(0x0ac8, 0x0302)},
 #ifndef CONFIG_USB_ZC0301
-        {USB_DEVICE(0x0ac8, 0x301b), DVNM("Z-Star zc301b")},
-        {USB_DEVICE(0x0ac8, 0x303b), DVNM("Vimicro 0x303b")},
+        {USB_DEVICE(0x0ac8, 0x301b)},
+        {USB_DEVICE(0x0ac8, 0x303b)},
 #endif
-        {USB_DEVICE(0x0ac8, 0x305b), DVNM("Z-star Vimicro zc0305b")},
+        {USB_DEVICE(0x0ac8, 0x305b), .driver_info = SENSOR_TAS5130C_VF0250},
 #ifndef CONFIG_USB_ZC0301
-        {USB_DEVICE(0x0ac8, 0x307b), DVNM("Z-Star 307b")},
-        {USB_DEVICE(0x10fd, 0x0128), DVNM("Typhoon Webshot II 300k 0x0128")},
-        {USB_DEVICE(0x10fd, 0x8050), DVNM("Typhoon Webshot II USB 300k")},
+        {USB_DEVICE(0x0ac8, 0x307b)},
+        {USB_DEVICE(0x10fd, 0x0128)},
+        {USB_DEVICE(0x10fd, 0x8050)},
 #endif
         {}                      /* end of entry */
 };
@@ -7605,7 +7587,7 @@ static int __init sd_mod_init(void)
 {
         if (usb_register(&sd_driver) < 0)
                 return -1;
-        PDEBUG(D_PROBE, "v%s registered", version);
+        PDEBUG(D_PROBE, "registered");
         return 0;
 }
 
diff --git a/drivers/media/video/ivtv/Kconfig b/drivers/media/video/ivtv/Kconfig
index 5d7ee8fcdd50..0069898bddab 100644
--- a/drivers/media/video/ivtv/Kconfig
+++ b/drivers/media/video/ivtv/Kconfig
@@ -2,9 +2,7 @@ config VIDEO_IVTV
         tristate "Conexant cx23416/cx23415 MPEG encoder/decoder support"
         depends on VIDEO_V4L1 && VIDEO_V4L2 && PCI && I2C && EXPERIMENTAL
         depends on INPUT   # due to VIDEO_IR
-        depends on HOTPLUG # due to FW_LOADER
         select I2C_ALGOBIT
-        select FW_LOADER
         select VIDEO_IR
         select VIDEO_TUNER
         select VIDEO_TVEEPROM
diff --git a/drivers/media/video/ivtv/ivtv-driver.c b/drivers/media/video/ivtv/ivtv-driver.c
index 41fd79279bb5..aea1664948ce 100644
--- a/drivers/media/video/ivtv/ivtv-driver.c
+++ b/drivers/media/video/ivtv/ivtv-driver.c
@@ -465,9 +465,8 @@ static void ivtv_process_eeprom(struct ivtv *itv)
         if (itv->options.radio == -1)
                 itv->options.radio = (tv.has_radio != 0);
         /* only enable newi2c if an IR blaster is present */
-        /* FIXME: for 2.6.20 the test against 2 should be removed */
-        if (itv->options.newi2c == -1 && tv.has_ir != -1 && tv.has_ir != 2) {
-                itv->options.newi2c = (tv.has_ir & 2) ? 1 : 0;
+        if (itv->options.newi2c == -1 && tv.has_ir) {
+                itv->options.newi2c = (tv.has_ir & 4) ? 1 : 0;
                 if (itv->options.newi2c) {
                     IVTV_INFO("Reopen i2c bus for IR-blaster support\n");
                     exit_ivtv_i2c(itv);
diff --git a/drivers/media/video/ivtv/ivtv-driver.h b/drivers/media/video/ivtv/ivtv-driver.h
index a08bb3331cfb..ab287b48fc2b 100644
--- a/drivers/media/video/ivtv/ivtv-driver.h
+++ b/drivers/media/video/ivtv/ivtv-driver.h
@@ -60,6 +60,7 @@
 #include <linux/dvb/video.h>
 #include <linux/dvb/audio.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <media/tuner.h>
 #include <media/cx2341x.h>
 
diff --git a/drivers/media/video/ivtv/ivtv-ioctl.c b/drivers/media/video/ivtv/ivtv-ioctl.c
index 52e00a7f3110..61030309d0ad 100644
--- a/drivers/media/video/ivtv/ivtv-ioctl.c
+++ b/drivers/media/video/ivtv/ivtv-ioctl.c
@@ -1842,69 +1842,73 @@ int ivtv_v4l2_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
         return res;
 }
 
-void ivtv_set_funcs(struct video_device *vdev)
-{
-        vdev->vidioc_querycap               = ivtv_querycap;
-        vdev->vidioc_g_priority             = ivtv_g_priority;
-        vdev->vidioc_s_priority             = ivtv_s_priority;
-        vdev->vidioc_s_audio                = ivtv_s_audio;
-        vdev->vidioc_g_audio                = ivtv_g_audio;
-        vdev->vidioc_enumaudio              = ivtv_enumaudio;
-        vdev->vidioc_s_audout               = ivtv_s_audout;
-        vdev->vidioc_g_audout               = ivtv_g_audout;
-        vdev->vidioc_enum_input             = ivtv_enum_input;
-        vdev->vidioc_enum_output            = ivtv_enum_output;
-        vdev->vidioc_enumaudout             = ivtv_enumaudout;
-        vdev->vidioc_cropcap                = ivtv_cropcap;
-        vdev->vidioc_s_crop                 = ivtv_s_crop;
-        vdev->vidioc_g_crop                 = ivtv_g_crop;
-        vdev->vidioc_g_input                = ivtv_g_input;
-        vdev->vidioc_s_input                = ivtv_s_input;
-        vdev->vidioc_g_output               = ivtv_g_output;
-        vdev->vidioc_s_output               = ivtv_s_output;
-        vdev->vidioc_g_frequency            = ivtv_g_frequency;
-        vdev->vidioc_s_frequency            = ivtv_s_frequency;
-        vdev->vidioc_s_tuner                = ivtv_s_tuner;
-        vdev->vidioc_g_tuner                = ivtv_g_tuner;
-        vdev->vidioc_g_enc_index            = ivtv_g_enc_index;
-        vdev->vidioc_g_fbuf                 = ivtv_g_fbuf;
-        vdev->vidioc_s_fbuf                 = ivtv_s_fbuf;
-        vdev->vidioc_g_std                  = ivtv_g_std;
-        vdev->vidioc_s_std                  = ivtv_s_std;
-        vdev->vidioc_overlay                = ivtv_overlay;
-        vdev->vidioc_log_status             = ivtv_log_status;
-        vdev->vidioc_enum_fmt_vid_cap       = ivtv_enum_fmt_vid_cap;
-        vdev->vidioc_encoder_cmd            = ivtv_encoder_cmd;
-        vdev->vidioc_try_encoder_cmd        = ivtv_try_encoder_cmd;
-        vdev->vidioc_enum_fmt_vid_out       = ivtv_enum_fmt_vid_out;
-        vdev->vidioc_g_fmt_vid_cap          = ivtv_g_fmt_vid_cap;
-        vdev->vidioc_g_fmt_vbi_cap          = ivtv_g_fmt_vbi_cap;
-        vdev->vidioc_g_fmt_sliced_vbi_cap   = ivtv_g_fmt_sliced_vbi_cap;
-        vdev->vidioc_g_fmt_vid_out          = ivtv_g_fmt_vid_out;
-        vdev->vidioc_g_fmt_vid_out_overlay  = ivtv_g_fmt_vid_out_overlay;
-        vdev->vidioc_g_fmt_sliced_vbi_out   = ivtv_g_fmt_sliced_vbi_out;
-        vdev->vidioc_s_fmt_vid_cap          = ivtv_s_fmt_vid_cap;
-        vdev->vidioc_s_fmt_vbi_cap          = ivtv_s_fmt_vbi_cap;
-        vdev->vidioc_s_fmt_sliced_vbi_cap   = ivtv_s_fmt_sliced_vbi_cap;
-        vdev->vidioc_s_fmt_vid_out          = ivtv_s_fmt_vid_out;
-        vdev->vidioc_s_fmt_vid_out_overlay  = ivtv_s_fmt_vid_out_overlay;
-        vdev->vidioc_s_fmt_sliced_vbi_out   = ivtv_s_fmt_sliced_vbi_out;
-        vdev->vidioc_try_fmt_vid_cap        = ivtv_try_fmt_vid_cap;
-        vdev->vidioc_try_fmt_vbi_cap        = ivtv_try_fmt_vbi_cap;
-        vdev->vidioc_try_fmt_sliced_vbi_cap = ivtv_try_fmt_sliced_vbi_cap;
-        vdev->vidioc_try_fmt_vid_out        = ivtv_try_fmt_vid_out;
-        vdev->vidioc_try_fmt_vid_out_overlay = ivtv_try_fmt_vid_out_overlay;
-        vdev->vidioc_try_fmt_sliced_vbi_out = ivtv_try_fmt_sliced_vbi_out;
-        vdev->vidioc_g_sliced_vbi_cap       = ivtv_g_sliced_vbi_cap;
-        vdev->vidioc_g_chip_ident           = ivtv_g_chip_ident;
+static const struct v4l2_ioctl_ops ivtv_ioctl_ops = {
+        .vidioc_querycap                    = ivtv_querycap,
+        .vidioc_g_priority                  = ivtv_g_priority,
+        .vidioc_s_priority                  = ivtv_s_priority,
+        .vidioc_s_audio                     = ivtv_s_audio,
+        .vidioc_g_audio                     = ivtv_g_audio,
+        .vidioc_enumaudio                   = ivtv_enumaudio,
+        .vidioc_s_audout                    = ivtv_s_audout,
+        .vidioc_g_audout                    = ivtv_g_audout,
+        .vidioc_enum_input                  = ivtv_enum_input,
+        .vidioc_enum_output                 = ivtv_enum_output,
+        .vidioc_enumaudout                  = ivtv_enumaudout,
+        .vidioc_cropcap                     = ivtv_cropcap,
+        .vidioc_s_crop                      = ivtv_s_crop,
+        .vidioc_g_crop                      = ivtv_g_crop,
+        .vidioc_g_input                     = ivtv_g_input,
+        .vidioc_s_input                     = ivtv_s_input,
+        .vidioc_g_output                    = ivtv_g_output,
+        .vidioc_s_output                    = ivtv_s_output,
+        .vidioc_g_frequency                 = ivtv_g_frequency,
+        .vidioc_s_frequency                 = ivtv_s_frequency,
+        .vidioc_s_tuner                     = ivtv_s_tuner,
+        .vidioc_g_tuner                     = ivtv_g_tuner,
+        .vidioc_g_enc_index                 = ivtv_g_enc_index,
+        .vidioc_g_fbuf                      = ivtv_g_fbuf,
+        .vidioc_s_fbuf                      = ivtv_s_fbuf,
+        .vidioc_g_std                       = ivtv_g_std,
+        .vidioc_s_std                       = ivtv_s_std,
+        .vidioc_overlay                     = ivtv_overlay,
+        .vidioc_log_status                  = ivtv_log_status,
+        .vidioc_enum_fmt_vid_cap            = ivtv_enum_fmt_vid_cap,
+        .vidioc_encoder_cmd                 = ivtv_encoder_cmd,
+        .vidioc_try_encoder_cmd             = ivtv_try_encoder_cmd,
+        .vidioc_enum_fmt_vid_out            = ivtv_enum_fmt_vid_out,
+        .vidioc_g_fmt_vid_cap               = ivtv_g_fmt_vid_cap,
+        .vidioc_g_fmt_vbi_cap               = ivtv_g_fmt_vbi_cap,
+        .vidioc_g_fmt_sliced_vbi_cap        = ivtv_g_fmt_sliced_vbi_cap,
+        .vidioc_g_fmt_vid_out               = ivtv_g_fmt_vid_out,
+        .vidioc_g_fmt_vid_out_overlay       = ivtv_g_fmt_vid_out_overlay,
+        .vidioc_g_fmt_sliced_vbi_out        = ivtv_g_fmt_sliced_vbi_out,
+        .vidioc_s_fmt_vid_cap               = ivtv_s_fmt_vid_cap,
+        .vidioc_s_fmt_vbi_cap               = ivtv_s_fmt_vbi_cap,
+        .vidioc_s_fmt_sliced_vbi_cap        = ivtv_s_fmt_sliced_vbi_cap,
+        .vidioc_s_fmt_vid_out               = ivtv_s_fmt_vid_out,
+        .vidioc_s_fmt_vid_out_overlay       = ivtv_s_fmt_vid_out_overlay,
+        .vidioc_s_fmt_sliced_vbi_out        = ivtv_s_fmt_sliced_vbi_out,
+        .vidioc_try_fmt_vid_cap             = ivtv_try_fmt_vid_cap,
+        .vidioc_try_fmt_vbi_cap             = ivtv_try_fmt_vbi_cap,
+        .vidioc_try_fmt_sliced_vbi_cap      = ivtv_try_fmt_sliced_vbi_cap,
+        .vidioc_try_fmt_vid_out             = ivtv_try_fmt_vid_out,
+        .vidioc_try_fmt_vid_out_overlay     = ivtv_try_fmt_vid_out_overlay,
+        .vidioc_try_fmt_sliced_vbi_out      = ivtv_try_fmt_sliced_vbi_out,
+        .vidioc_g_sliced_vbi_cap            = ivtv_g_sliced_vbi_cap,
+        .vidioc_g_chip_ident                = ivtv_g_chip_ident,
 #ifdef CONFIG_VIDEO_ADV_DEBUG
-        vdev->vidioc_g_register             = ivtv_g_register;
-        vdev->vidioc_s_register             = ivtv_s_register;
+        .vidioc_g_register                  = ivtv_g_register,
+        .vidioc_s_register                  = ivtv_s_register,
 #endif
-        vdev->vidioc_default                = ivtv_default;
-        vdev->vidioc_queryctrl              = ivtv_queryctrl;
-        vdev->vidioc_querymenu              = ivtv_querymenu;
-        vdev->vidioc_g_ext_ctrls            = ivtv_g_ext_ctrls;
-        vdev->vidioc_s_ext_ctrls            = ivtv_s_ext_ctrls;
-        vdev->vidioc_try_ext_ctrls          = ivtv_try_ext_ctrls;
+        .vidioc_default                     = ivtv_default,
+        .vidioc_queryctrl                   = ivtv_queryctrl,
+        .vidioc_querymenu                   = ivtv_querymenu,
+        .vidioc_g_ext_ctrls                 = ivtv_g_ext_ctrls,
+        .vidioc_s_ext_ctrls                 = ivtv_s_ext_ctrls,
+        .vidioc_try_ext_ctrls               = ivtv_try_ext_ctrls,
+};
+
+void ivtv_set_funcs(struct video_device *vdev)
+{
+        vdev->ioctl_ops = &ivtv_ioctl_ops;
 }
diff --git a/drivers/media/video/ivtv/ivtv-streams.c b/drivers/media/video/ivtv/ivtv-streams.c
index f8883b487f4a..54d2023b26c4 100644
--- a/drivers/media/video/ivtv/ivtv-streams.c
+++ b/drivers/media/video/ivtv/ivtv-streams.c
@@ -208,16 +208,11 @@ static int ivtv_prep_dev(struct ivtv *itv, int type)
                 return -ENOMEM;
         }
 
-        s->v4l2dev->type = VID_TYPE_CAPTURE | VID_TYPE_TUNER | VID_TYPE_TELETEXT |
-                    VID_TYPE_CLIPPING | VID_TYPE_SCALES | VID_TYPE_MPEG_ENCODER;
-        if (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT) {
-                s->v4l2dev->type |= VID_TYPE_MPEG_DECODER;
-        }
         snprintf(s->v4l2dev->name, sizeof(s->v4l2dev->name), "ivtv%d %s",
                         itv->num, s->name);
 
         s->v4l2dev->minor = minor;
-        s->v4l2dev->dev = &itv->dev->dev;
+        s->v4l2dev->parent = &itv->dev->dev;
         s->v4l2dev->fops = ivtv_stream_info[type].fops;
         s->v4l2dev->release = video_device_release;
         s->v4l2dev->tvnorms = V4L2_STD_ALL;
diff --git a/drivers/media/video/m52790.c b/drivers/media/video/m52790.c
index 39bf6b114d50..89a781c6929d 100644
--- a/drivers/media/video/m52790.c
+++ b/drivers/media/video/m52790.c
@@ -26,7 +26,7 @@
 #include <asm/uaccess.h>
 #include <linux/i2c.h>
 #include <linux/i2c-id.h>
-#include <linux/videodev.h>
+#include <linux/videodev2.h>
 #include <media/m52790.h>
 #include <media/v4l2-common.h>
 #include <media/v4l2-chip-ident.h>
diff --git a/drivers/media/video/meye.c b/drivers/media/video/meye.c
index 2fb5854cf6f0..7c8ef6ac6c39 100644
--- a/drivers/media/video/meye.c
+++ b/drivers/media/video/meye.c
@@ -31,6 +31,7 @@
 #include <linux/init.h>
 #include <linux/videodev.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <asm/uaccess.h>
 #include <asm/io.h>
 #include <linux/delay.h>
@@ -1697,13 +1698,7 @@ static const struct file_operations meye_fops = {
         .llseek         = no_llseek,
 };
 
-static struct video_device meye_template = {
-        .owner          = THIS_MODULE,
-        .name           = "meye",
-        .type           = VID_TYPE_CAPTURE,
-        .fops           = &meye_fops,
-        .release        = video_device_release,
-        .minor          = -1,
+static const struct v4l2_ioctl_ops meye_ioctl_ops = {
         .vidioc_querycap        = vidioc_querycap,
         .vidioc_enum_input      = vidioc_enum_input,
         .vidioc_g_input         = vidioc_g_input,
@@ -1724,6 +1719,14 @@ static struct video_device meye_template = {
         .vidioc_default         = vidioc_default,
 };
 
+static struct video_device meye_template = {
+        .name           = "meye",
+        .fops           = &meye_fops,
+        .ioctl_ops      = &meye_ioctl_ops,
+        .release        = video_device_release,
+        .minor          = -1,
+};
+
 #ifdef CONFIG_PM
 static int meye_suspend(struct pci_dev *pdev, pm_message_t state)
 {
@@ -1801,7 +1804,7 @@ static int __devinit meye_probe(struct pci_dev *pcidev,
         }
 
         memcpy(meye.video_dev, &meye_template, sizeof(meye_template));
-        meye.video_dev->dev = &meye.mchip_dev->dev;
+        meye.video_dev->parent = &meye.mchip_dev->dev;
 
         if ((ret = sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERA, 1))) {
                 printk(KERN_ERR "meye: unable to power on the camera\n");
diff --git a/drivers/media/video/msp3400-driver.c b/drivers/media/video/msp3400-driver.c
index 5691e019d195..3da74dcee902 100644
--- a/drivers/media/video/msp3400-driver.c
+++ b/drivers/media/video/msp3400-driver.c
@@ -51,9 +51,9 @@
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/i2c.h>
-#include <linux/videodev.h>
 #include <linux/videodev2.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <media/v4l2-i2c-drv-legacy.h>
 #include <media/tvaudio.h>
 #include <media/msp3400.h>
diff --git a/drivers/media/video/msp3400-kthreads.c b/drivers/media/video/msp3400-kthreads.c
index 1622f70e4dd0..846a14a61fd1 100644
--- a/drivers/media/video/msp3400-kthreads.c
+++ b/drivers/media/video/msp3400-kthreads.c
@@ -25,7 +25,6 @@
 #include <linux/slab.h>
 #include <linux/i2c.h>
 #include <linux/freezer.h>
-#include <linux/videodev.h>
 #include <linux/videodev2.h>
 #include <media/v4l2-common.h>
 #include <media/msp3400.h>
diff --git a/drivers/media/video/mt9m001.c b/drivers/media/video/mt9m001.c
index ee43499544c1..554d2295484e 100644
--- a/drivers/media/video/mt9m001.c
+++ b/drivers/media/video/mt9m001.c
@@ -120,7 +120,7 @@ static int mt9m001_init(struct soc_camera_device *icd)
         int ret;
 
         /* Disable chip, synchronous option update */
-        dev_dbg(icd->vdev->dev, "%s\n", __func__);
+        dev_dbg(icd->vdev->parent, "%s\n", __func__);
 
         ret = reg_write(icd, MT9M001_RESET, 1);
         if (ret >= 0)
diff --git a/drivers/media/video/ov511.c b/drivers/media/video/ov511.c
index eafb0c7736e6..9edaca4371d7 100644
--- a/drivers/media/video/ov511.c
+++ b/drivers/media/video/ov511.c
@@ -4666,9 +4666,7 @@ static const struct file_operations ov511_fops = {
 };
 
 static struct video_device vdev_template = {
-        .owner =        THIS_MODULE,
         .name =         "OV511 USB Camera",
-        .type =         VID_TYPE_CAPTURE,
         .fops =         &ov511_fops,
         .release =      video_device_release,
         .minor =        -1,
@@ -5661,43 +5659,43 @@ static int ov_create_sysfs(struct video_device *vdev)
 {
         int rc;
 
-        rc = video_device_create_file(vdev, &dev_attr_custom_id);
+        rc = device_create_file(&vdev->dev, &dev_attr_custom_id);
         if (rc) goto err;
-        rc = video_device_create_file(vdev, &dev_attr_model);
+        rc = device_create_file(&vdev->dev, &dev_attr_model);
         if (rc) goto err_id;
-        rc = video_device_create_file(vdev, &dev_attr_bridge);
+        rc = device_create_file(&vdev->dev, &dev_attr_bridge);
         if (rc) goto err_model;
-        rc = video_device_create_file(vdev, &dev_attr_sensor);
+        rc = device_create_file(&vdev->dev, &dev_attr_sensor);
         if (rc) goto err_bridge;
-        rc = video_device_create_file(vdev, &dev_attr_brightness);
+        rc = device_create_file(&vdev->dev, &dev_attr_brightness);
         if (rc) goto err_sensor;
-        rc = video_device_create_file(vdev, &dev_attr_saturation);
+        rc = device_create_file(&vdev->dev, &dev_attr_saturation);
         if (rc) goto err_bright;
-        rc = video_device_create_file(vdev, &dev_attr_contrast);
+        rc = device_create_file(&vdev->dev, &dev_attr_contrast);
         if (rc) goto err_sat;
-        rc = video_device_create_file(vdev, &dev_attr_hue);
+        rc = device_create_file(&vdev->dev, &dev_attr_hue);
         if (rc) goto err_contrast;
-        rc = video_device_create_file(vdev, &dev_attr_exposure);
+        rc = device_create_file(&vdev->dev, &dev_attr_exposure);
         if (rc) goto err_hue;
 
         return 0;
 
 err_hue:
-        video_device_remove_file(vdev, &dev_attr_hue);
+        device_remove_file(&vdev->dev, &dev_attr_hue);
 err_contrast:
-        video_device_remove_file(vdev, &dev_attr_contrast);
+        device_remove_file(&vdev->dev, &dev_attr_contrast);
 err_sat:
-        video_device_remove_file(vdev, &dev_attr_saturation);
+        device_remove_file(&vdev->dev, &dev_attr_saturation);
 err_bright:
-        video_device_remove_file(vdev, &dev_attr_brightness);
+        device_remove_file(&vdev->dev, &dev_attr_brightness);
 err_sensor:
-        video_device_remove_file(vdev, &dev_attr_sensor);
+        device_remove_file(&vdev->dev, &dev_attr_sensor);
 err_bridge:
-        video_device_remove_file(vdev, &dev_attr_bridge);
+        device_remove_file(&vdev->dev, &dev_attr_bridge);
 err_model:
-        video_device_remove_file(vdev, &dev_attr_model);
+        device_remove_file(&vdev->dev, &dev_attr_model);
 err_id:
-        video_device_remove_file(vdev, &dev_attr_custom_id);
+        device_remove_file(&vdev->dev, &dev_attr_custom_id);
 err:
         return rc;
 }
@@ -5833,7 +5831,7 @@ ov51x_probe(struct usb_interface *intf, const struct usb_device_id *id)
                 goto error;
 
         memcpy(ov->vdev, &vdev_template, sizeof(*ov->vdev));
-        ov->vdev->dev = &intf->dev;
+        ov->vdev->parent = &intf->dev;
         video_set_drvdata(ov->vdev, ov);
 
         for (i = 0; i < OV511_MAX_UNIT_VIDEO; i++) {
diff --git a/drivers/media/video/ov511.h b/drivers/media/video/ov511.h
index 1010e51189b7..baded1262ca9 100644
--- a/drivers/media/video/ov511.h
+++ b/drivers/media/video/ov511.h
@@ -4,6 +4,7 @@
 #include <asm/uaccess.h>
 #include <linux/videodev.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <linux/usb.h>
 #include <linux/mutex.h>
 
diff --git a/drivers/media/video/planb.c b/drivers/media/video/planb.c
index 36047d4e70f6..e69de29bb2d1 100644
--- a/drivers/media/video/planb.c
+++ b/drivers/media/video/planb.c
@@ -1,2309 +0,0 @@
-/*
-    planb - PlanB frame grabber driver
-
-    PlanB is used in the 7x00/8x00 series of PowerMacintosh
-    Computers as video input DMA controller.
-
-    Copyright (C) 1998 Michel Lanners (mlan@cpu.lu)
-
-    Based largely on the bttv driver by Ralph Metzler (rjkm@thp.uni-koeln.de)
-
-    Additional debugging and coding by Takashi Oe (toe@unlserve.unl.edu)
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-/* $Id: planb.c,v 1.18 1999/05/02 17:36:34 mlan Exp $ */
-
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/major.h>
-#include <linux/slab.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/vmalloc.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/videodev.h>
-#include <media/v4l2-common.h>
-#include <linux/wait.h>
-#include <asm/uaccess.h>
-#include <asm/io.h>
-#include <asm/prom.h>
-#include <asm/dbdma.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/irq.h>
-#include <linux/mutex.h>
-
-#include "planb.h"
-#include "saa7196.h"
-
-/* Would you mind for some ugly debugging? */
-#if 0
-#define DEBUG(x...) printk(KERN_DEBUG ## x) /* Debug driver */
-#else
-#define DEBUG(x...)             /* Don't debug driver */
-#endif
-
-#if 0
-#define IDEBUG(x...) printk(KERN_DEBUG ## x) /* Debug interrupt part */
-#else
-#define IDEBUG(x...)            /* Don't debug interrupt part */
-#endif
-
-/* Ever seen a Mac with more than 1 of these? */
-#define PLANB_MAX 1
-
-static int planb_num;
-static struct planb planbs[PLANB_MAX];
-static volatile struct planb_registers *planb_regs;
-
-static int def_norm = PLANB_DEF_NORM;   /* default norm */
-static int video_nr = -1;
-
-module_param(def_norm, int, 0);
-MODULE_PARM_DESC(def_norm, "Default startup norm (0=PAL, 1=NTSC, 2=SECAM)");
-module_param(video_nr, int, 0);
-MODULE_LICENSE("GPL");
-
-
-/* ------------------ PlanB Exported Functions ------------------ */
-static long planb_write(struct video_device *, const char *, unsigned long, int);
-static long planb_read(struct video_device *, char *, unsigned long, int);
-static int planb_open(struct video_device *, int);
-static void planb_close(struct video_device *);
-static int planb_ioctl(struct video_device *, unsigned int, void *);
-static int planb_init_done(struct video_device *);
-static int planb_mmap(struct video_device *, const char *, unsigned long);
-static void release_planb(void);
-int init_planbs(struct video_init *);
-
-/* ------------------ PlanB Internal Functions ------------------ */
-static int planb_prepare_open(struct planb *);
-static void planb_prepare_close(struct planb *);
-static void saa_write_reg(unsigned char, unsigned char);
-static unsigned char saa_status(int, struct planb *);
-static void saa_set(unsigned char, unsigned char, struct planb *);
-static void saa_init_regs(struct planb *);
-static int grabbuf_alloc(struct planb *);
-static int vgrab(struct planb *, struct video_mmap *);
-static void add_clip(struct planb *, struct video_clip *);
-static void fill_cmd_buff(struct planb *);
-static void cmd_buff(struct planb *);
-static volatile struct dbdma_cmd *setup_grab_cmd(int, struct planb *);
-static void overlay_start(struct planb *);
-static void overlay_stop(struct planb *);
-static inline void tab_cmd_dbdma(volatile struct dbdma_cmd *, unsigned short,
-        unsigned int);
-static inline void tab_cmd_store(volatile struct dbdma_cmd *, unsigned int,
-        unsigned int);
-static inline void tab_cmd_gen(volatile struct dbdma_cmd *, unsigned short,
-        unsigned short, unsigned int, unsigned int);
-static int init_planb(struct planb *);
-static int find_planb(void);
-static void planb_pre_capture(int, int, struct planb *);
-static volatile struct dbdma_cmd *cmd_geo_setup(volatile struct dbdma_cmd *,
-                                        int, int, int, int, int, struct planb *);
-static inline void planb_dbdma_stop(volatile struct dbdma_regs *);
-static unsigned int saa_geo_setup(int, int, int, int, struct planb *);
-static inline int overlay_is_active(struct planb *);
-
-/*******************************/
-/* Memory management functions */
-/*******************************/
-
-static int grabbuf_alloc(struct planb *pb)
-{
-        int i, npage;
-
-        npage = MAX_GBUFFERS * ((PLANB_MAX_FBUF / PAGE_SIZE + 1)
-#ifndef PLANB_GSCANLINE
-                + MAX_LNUM
-#endif /* PLANB_GSCANLINE */
-                );
-        if ((pb->rawbuf = kmalloc(npage
-                                * sizeof(unsigned long), GFP_KERNEL)) == 0)
-                return -ENOMEM;
-        for (i = 0; i < npage; i++) {
-                pb->rawbuf[i] = (unsigned char *)__get_free_pages(GFP_KERNEL
-                                                                |GFP_DMA, 0);
-                if (!pb->rawbuf[i])
-                        break;
-                SetPageReserved(virt_to_page(pb->rawbuf[i]));
-        }
-        if (i-- < npage) {
-                printk(KERN_DEBUG "PlanB: init_grab: grab buffer not allocated\n");
-                for (; i > 0; i--) {
-                        ClearPageReserved(virt_to_page(pb->rawbuf[i]));
-                        free_pages((unsigned long)pb->rawbuf[i], 0);
-                }
-                kfree(pb->rawbuf);
-                return -ENOBUFS;
-        }
-        pb->rawbuf_size = npage;
-        return 0;
-}
-
-/*****************************/
-/* Hardware access functions */
-/*****************************/
-
-static void saa_write_reg(unsigned char addr, unsigned char val)
-{
-        planb_regs->saa_addr = addr; eieio();
-        planb_regs->saa_regval = val; eieio();
-        return;
-}
-
-/* return  status byte 0 or 1: */
-static unsigned char saa_status(int byte, struct planb *pb)
-{
-        saa_regs[pb->win.norm][SAA7196_STDC] =
-                (saa_regs[pb->win.norm][SAA7196_STDC] & ~2) | ((byte & 1) << 1);
-        saa_write_reg (SAA7196_STDC, saa_regs[pb->win.norm][SAA7196_STDC]);
-
-        /* Let's wait 30msec for this one */
-        msleep_interruptible(30);
-
-        return (unsigned char)in_8 (&planb_regs->saa_status);
-}
-
-static void saa_set(unsigned char addr, unsigned char val, struct planb *pb)
-{
-        if(saa_regs[pb->win.norm][addr] != val) {
-                saa_regs[pb->win.norm][addr] = val;
-                saa_write_reg (addr, val);
-        }
-        return;
-}
-
-static void saa_init_regs(struct planb *pb)
-{
-        int i;
-
-        for (i = 0; i < SAA7196_NUMREGS; i++)
-                saa_write_reg (i, saa_regs[pb->win.norm][i]);
-}
-
-static unsigned int saa_geo_setup(int width, int height, int interlace, int bpp,
-        struct planb *pb)
-{
-        int ht, norm = pb->win.norm;
-
-        switch(bpp) {
-        case 2:
-                /* RGB555+a 1x16-bit + 16-bit transparent */
-                saa_regs[norm][SAA7196_FMTS] &= ~0x3;
-                break;
-        case 1:
-        case 4:
-                /* RGB888 1x24-bit + 8-bit transparent */
-                saa_regs[norm][SAA7196_FMTS] &= ~0x1;
-                saa_regs[norm][SAA7196_FMTS] |= 0x2;
-                break;
-        default:
-                return -EINVAL;
-        }
-        ht = (interlace ? height / 2 : height);
-        saa_regs[norm][SAA7196_OUTPIX] = (unsigned char) (width & 0x00ff);
-        saa_regs[norm][SAA7196_HFILT] = (saa_regs[norm][SAA7196_HFILT] & ~0x3)
-                                                | (width >> 8 & 0x3);
-        saa_regs[norm][SAA7196_OUTLINE] = (unsigned char) (ht & 0xff);
-        saa_regs[norm][SAA7196_VYP] = (saa_regs[norm][SAA7196_VYP] & ~0x3)
-                                                | (ht >> 8 & 0x3);
-        /* feed both fields if interlaced, or else feed only even fields */
-        saa_regs[norm][SAA7196_FMTS] = (interlace) ?
-                                        (saa_regs[norm][SAA7196_FMTS] & ~0x60)
-                                        : (saa_regs[norm][SAA7196_FMTS] | 0x60);
-        /* transparent mode; extended format enabled */
-        saa_regs[norm][SAA7196_DPATH] |= 0x3;
-
-        return 0;
-}
-
-/***************************/
-/* DBDMA support functions */
-/***************************/
-
-static inline void planb_dbdma_restart(volatile struct dbdma_regs *ch)
-{
-        out_le32(&ch->control, PLANB_CLR(RUN));
-        out_le32(&ch->control, PLANB_SET(RUN|WAKE) | PLANB_CLR(PAUSE));
-}
-
-static inline void planb_dbdma_stop(volatile struct dbdma_regs *ch)
-{
-        int i = 0;
-
-        out_le32(&ch->control, PLANB_CLR(RUN) | PLANB_SET(FLUSH));
-        while((in_le32(&ch->status) == (ACTIVE | FLUSH)) && (i < 999)) {
-                IDEBUG("PlanB: waiting for DMA to stop\n");
-                i++;
-        }
-}
-
-static inline void tab_cmd_dbdma(volatile struct dbdma_cmd *ch,
-        unsigned short command, unsigned int cmd_dep)
-{
-        st_le16(&ch->command, command);
-        st_le32(&ch->cmd_dep, cmd_dep);
-}
-
-static inline void tab_cmd_store(volatile struct dbdma_cmd *ch,
-        unsigned int phy_addr, unsigned int cmd_dep)
-{
-        st_le16(&ch->command, STORE_WORD | KEY_SYSTEM);
-        st_le16(&ch->req_count, 4);
-        st_le32(&ch->phy_addr, phy_addr);
-        st_le32(&ch->cmd_dep, cmd_dep);
-}
-
-static inline void tab_cmd_gen(volatile struct dbdma_cmd *ch,
-        unsigned short command, unsigned short req_count,
-        unsigned int phy_addr, unsigned int cmd_dep)
-{
-        st_le16(&ch->command, command);
-        st_le16(&ch->req_count, req_count);
-        st_le32(&ch->phy_addr, phy_addr);
-        st_le32(&ch->cmd_dep, cmd_dep);
-}
-
-static volatile struct dbdma_cmd *cmd_geo_setup(
-        volatile struct dbdma_cmd *c1, int width, int height, int interlace,
-        int bpp, int clip, struct planb *pb)
-{
-        int norm = pb->win.norm;
-
-        if((saa_geo_setup(width, height, interlace, bpp, pb)) != 0)
-                return (volatile struct dbdma_cmd *)NULL;
-        tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->saa_addr),
-                                                        SAA7196_FMTS);
-        tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->saa_regval),
-                                        saa_regs[norm][SAA7196_FMTS]);
-        tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->saa_addr),
-                                                        SAA7196_DPATH);
-        tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->saa_regval),
-                                        saa_regs[norm][SAA7196_DPATH]);
-        tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->even),
-                                        bpp | ((clip)? PLANB_CLIPMASK: 0));
-        tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->odd),
-                                        bpp | ((clip)? PLANB_CLIPMASK: 0));
-        tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->saa_addr),
-                                                        SAA7196_OUTPIX);
-        tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->saa_regval),
-                                        saa_regs[norm][SAA7196_OUTPIX]);
-        tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->saa_addr),
-                                                        SAA7196_HFILT);
-        tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->saa_regval),
-                                        saa_regs[norm][SAA7196_HFILT]);
-        tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->saa_addr),
-                                                        SAA7196_OUTLINE);
-        tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->saa_regval),
-                                        saa_regs[norm][SAA7196_OUTLINE]);
-        tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->saa_addr),
-                                                        SAA7196_VYP);
-        tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->saa_regval),
-                                        saa_regs[norm][SAA7196_VYP]);
-        return c1;
-}
-
-/******************************/
-/* misc. supporting functions */
-/******************************/
-
-static inline void planb_lock(struct planb *pb)
-{
-        mutex_lock(&pb->lock);
-}
-
-static inline void planb_unlock(struct planb *pb)
-{
-        mutex_unlock(&pb->lock);
-}
-
-/***************/
-/* Driver Core */
-/***************/
-
-static int planb_prepare_open(struct planb *pb)
-{
-        int     i, size;
-
-        /* allocate memory for two plus alpha command buffers (size: max lines,
-           plus 40 commands handling, plus 1 alignment), plus dummy command buf,
-           plus clipmask buffer, plus frame grabbing status */
-        size = (pb->tab_size*(2+MAX_GBUFFERS*TAB_FACTOR)+1+MAX_GBUFFERS
-                * PLANB_DUMMY)*sizeof(struct dbdma_cmd)
-                +(PLANB_MAXLINES*((PLANB_MAXPIXELS+7)& ~7))/8
-                +MAX_GBUFFERS*sizeof(unsigned int);
-        if ((pb->priv_space = kzalloc (size, GFP_KERNEL)) == 0)
-                return -ENOMEM;
-        pb->overlay_last1 = pb->ch1_cmd = (volatile struct dbdma_cmd *)
-                                                DBDMA_ALIGN (pb->priv_space);
-        pb->overlay_last2 = pb->ch2_cmd = pb->ch1_cmd + pb->tab_size;
-        pb->ch1_cmd_phys = virt_to_bus(pb->ch1_cmd);
-        pb->cap_cmd[0] = pb->ch2_cmd + pb->tab_size;
-        pb->pre_cmd[0] = pb->cap_cmd[0] + pb->tab_size * TAB_FACTOR;
-        for (i = 1; i < MAX_GBUFFERS; i++) {
-                pb->cap_cmd[i] = pb->pre_cmd[i-1] + PLANB_DUMMY;
-                pb->pre_cmd[i] = pb->cap_cmd[i] + pb->tab_size * TAB_FACTOR;
-        }
-        pb->frame_stat=(volatile unsigned int *)(pb->pre_cmd[MAX_GBUFFERS-1]
-                                                + PLANB_DUMMY);
-        pb->mask = (unsigned char *)(pb->frame_stat+MAX_GBUFFERS);
-
-        pb->rawbuf = NULL;
-        pb->rawbuf_size = 0;
-        pb->grabbing = 0;
-        for (i = 0; i < MAX_GBUFFERS; i++) {
-                pb->frame_stat[i] = GBUFFER_UNUSED;
-                pb->gwidth[i] = 0;
-                pb->gheight[i] = 0;
-                pb->gfmt[i] = 0;
-                pb->gnorm_switch[i] = 0;
-#ifndef PLANB_GSCANLINE
-                pb->lsize[i] = 0;
-                pb->lnum[i] = 0;
-#endif /* PLANB_GSCANLINE */
-        }
-        pb->gcount = 0;
-        pb->suspend = 0;
-        pb->last_fr = -999;
-        pb->prev_last_fr = -999;
-
-        /* Reset DMA controllers */
-        planb_dbdma_stop(&pb->planb_base->ch2);
-        planb_dbdma_stop(&pb->planb_base->ch1);
-
-        return 0;
-}
-
-static void planb_prepare_close(struct planb *pb)
-{
-        int i;
-
-        /* make sure the dma's are idle */
-        planb_dbdma_stop(&pb->planb_base->ch2);
-        planb_dbdma_stop(&pb->planb_base->ch1);
-        /* free kernel memory of command buffers */
-        if(pb->priv_space != 0) {
-                kfree (pb->priv_space);
-                pb->priv_space = 0;
-                pb->cmd_buff_inited = 0;
-        }
-        if(pb->rawbuf) {
-                for (i = 0; i < pb->rawbuf_size; i++) {
-                        ClearPageReserved(virt_to_page(pb->rawbuf[i]));
-                        free_pages((unsigned long)pb->rawbuf[i], 0);
-                }
-                kfree(pb->rawbuf);
-        }
-        pb->rawbuf = NULL;
-}
-
-/*****************************/
-/* overlay support functions */
-/*****************************/
-
-static inline int overlay_is_active(struct planb *pb)
-{
-        unsigned int size = pb->tab_size * sizeof(struct dbdma_cmd);
-        unsigned int caddr = (unsigned)in_le32(&pb->planb_base->ch1.cmdptr);
-
-        return (in_le32(&pb->overlay_last1->cmd_dep) == pb->ch1_cmd_phys)
-                        && (caddr < (pb->ch1_cmd_phys + size))
-                        && (caddr >= (unsigned)pb->ch1_cmd_phys);
-}
-
-static void overlay_start(struct planb *pb)
-{
-
-        DEBUG("PlanB: overlay_start()\n");
-
-        if(ACTIVE & in_le32(&pb->planb_base->ch1.status)) {
-
-                DEBUG("PlanB: presumably, grabbing is in progress...\n");
-
-                planb_dbdma_stop(&pb->planb_base->ch2);
-                out_le32 (&pb->planb_base->ch2.cmdptr,
-                                                virt_to_bus(pb->ch2_cmd));
-                planb_dbdma_restart(&pb->planb_base->ch2);
-                st_le16 (&pb->ch1_cmd->command, DBDMA_NOP);
-                tab_cmd_dbdma(pb->last_cmd[pb->last_fr],
-                                        DBDMA_NOP | BR_ALWAYS,
-                                        virt_to_bus(pb->ch1_cmd));
-                eieio();
-                pb->prev_last_fr = pb->last_fr;
-                pb->last_fr = -2;
-                if(!(ACTIVE & in_le32(&pb->planb_base->ch1.status))) {
-                        IDEBUG("PlanB: became inactive "
-                                "in the mean time... reactivating\n");
-                        planb_dbdma_stop(&pb->planb_base->ch1);
-                        out_le32 (&pb->planb_base->ch1.cmdptr,
-                                                virt_to_bus(pb->ch1_cmd));
-                        planb_dbdma_restart(&pb->planb_base->ch1);
-                }
-        } else {
-
-                DEBUG("PlanB: currently idle, so can do whatever\n");
-
-                planb_dbdma_stop(&pb->planb_base->ch2);
-                planb_dbdma_stop(&pb->planb_base->ch1);
-                st_le32 (&pb->planb_base->ch2.cmdptr,
-                                                virt_to_bus(pb->ch2_cmd));
-                st_le32 (&pb->planb_base->ch1.cmdptr,
-                                                virt_to_bus(pb->ch1_cmd));
-                out_le16 (&pb->ch1_cmd->command, DBDMA_NOP);
-                planb_dbdma_restart(&pb->planb_base->ch2);
-                planb_dbdma_restart(&pb->planb_base->ch1);
-                pb->last_fr = -1;
-        }
-        return;
-}
-
-static void overlay_stop(struct planb *pb)
-{
-        DEBUG("PlanB: overlay_stop()\n");
-
-        if(pb->last_fr == -1) {
-
-                DEBUG("PlanB: no grabbing, it seems...\n");
-
-                planb_dbdma_stop(&pb->planb_base->ch2);
-                planb_dbdma_stop(&pb->planb_base->ch1);
-                pb->last_fr = -999;
-        } else if(pb->last_fr == -2) {
-                unsigned int cmd_dep;
-                tab_cmd_dbdma(pb->cap_cmd[pb->prev_last_fr], DBDMA_STOP, 0);
-                eieio();
-                cmd_dep = (unsigned int)in_le32(&pb->overlay_last1->cmd_dep);
-                if(overlay_is_active(pb)) {
-
-                        DEBUG("PlanB: overlay is currently active\n");
-
-                        planb_dbdma_stop(&pb->planb_base->ch2);
-                        planb_dbdma_stop(&pb->planb_base->ch1);
-                        if(cmd_dep != pb->ch1_cmd_phys) {
-                                out_le32(&pb->planb_base->ch1.cmdptr,
-                                                virt_to_bus(pb->overlay_last1));
-                                planb_dbdma_restart(&pb->planb_base->ch1);
-                        }
-                }
-                pb->last_fr = pb->prev_last_fr;
-                pb->prev_last_fr = -999;
-        }
-        return;
-}
-
-static void suspend_overlay(struct planb *pb)
-{
-        int fr = -1;
-        struct dbdma_cmd last;
-
-        DEBUG("PlanB: suspend_overlay: %d\n", pb->suspend);
-
-        if(pb->suspend++)
-                return;
-        if(ACTIVE & in_le32(&pb->planb_base->ch1.status)) {
-                if(pb->last_fr == -2) {
-                        fr = pb->prev_last_fr;
-                        memcpy(&last, (void*)pb->last_cmd[fr], sizeof(last));
-                        tab_cmd_dbdma(pb->last_cmd[fr], DBDMA_STOP, 0);
-                }
-                if(overlay_is_active(pb)) {
-                        planb_dbdma_stop(&pb->planb_base->ch2);
-                        planb_dbdma_stop(&pb->planb_base->ch1);
-                        pb->suspended.overlay = 1;
-                        pb->suspended.frame = fr;
-                        memcpy(&pb->suspended.cmd, &last, sizeof(last));
-                        return;
-                }
-        }
-        pb->suspended.overlay = 0;
-        pb->suspended.frame = fr;
-        memcpy(&pb->suspended.cmd, &last, sizeof(last));
-        return;
-}
-
-static void resume_overlay(struct planb *pb)
-{
-
-        DEBUG("PlanB: resume_overlay: %d\n", pb->suspend);
-
-        if(pb->suspend > 1)
-                return;
-        if(pb->suspended.frame != -1) {
-                memcpy((void*)pb->last_cmd[pb->suspended.frame],
-                                &pb->suspended.cmd, sizeof(pb->suspended.cmd));
-        }
-        if(ACTIVE & in_le32(&pb->planb_base->ch1.status)) {
-                goto finish;
-        }
-        if(pb->suspended.overlay) {
-
-                DEBUG("PlanB: overlay being resumed\n");
-
-                st_le16 (&pb->ch1_cmd->command, DBDMA_NOP);
-                st_le16 (&pb->ch2_cmd->command, DBDMA_NOP);
-                /* Set command buffer addresses */
-                st_le32(&pb->planb_base->ch1.cmdptr,
-                                        virt_to_bus(pb->overlay_last1));
-                out_le32(&pb->planb_base->ch2.cmdptr,
-                                        virt_to_bus(pb->overlay_last2));
-                /* Start the DMA controller */
-                out_le32 (&pb->planb_base->ch2.control,
-                                PLANB_CLR(PAUSE) | PLANB_SET(RUN|WAKE));
-                out_le32 (&pb->planb_base->ch1.control,
-                                PLANB_CLR(PAUSE) | PLANB_SET(RUN|WAKE));
-        } else if(pb->suspended.frame != -1) {
-                out_le32(&pb->planb_base->ch1.cmdptr,
-                                virt_to_bus(pb->last_cmd[pb->suspended.frame]));
-                out_le32 (&pb->planb_base->ch1.control,
-                                PLANB_CLR(PAUSE) | PLANB_SET(RUN|WAKE));
-        }
-
-finish:
-        pb->suspend--;
-        wake_up_interruptible(&pb->suspendq);
-}
-
-static void add_clip(struct planb *pb, struct video_clip *clip)
-{
-        volatile unsigned char  *base;
-        int     xc = clip->x, yc = clip->y;
-        int     wc = clip->width, hc = clip->height;
-        int     ww = pb->win.width, hw = pb->win.height;
-        int     x, y, xtmp1, xtmp2;
-
-        DEBUG("PlanB: clip %dx%d+%d+%d\n", wc, hc, xc, yc);
-
-        if(xc < 0) {
-                wc += xc;
-                xc = 0;
-        }
-        if(yc < 0) {
-                hc += yc;
-                yc = 0;
-        }
-        if(xc + wc > ww)
-                wc = ww - xc;
-        if(wc <= 0) /* Nothing to do */
-                return;
-        if(yc + hc > hw)
-                hc = hw - yc;
-
-        for (y = yc; y < yc+hc; y++) {
-                xtmp1=xc>>3;
-                xtmp2=(xc+wc)>>3;
-                base = pb->mask + y*96;
-                if(xc != 0 || wc >= 8)
-                        *(base + xtmp1) &= (unsigned char)(0x00ff &
-                                (0xff00 >> (xc&7)));
-                for (x = xtmp1 + 1; x < xtmp2; x++) {
-                        *(base + x) = 0;
-                }
-                if(xc < (ww & ~0x7))
-                        *(base + xtmp2) &= (unsigned char)(0x00ff >>
-                                ((xc+wc) & 7));
-        }
-
-        return;
-}
-
-static void fill_cmd_buff(struct planb *pb)
-{
-        int restore = 0;
-        volatile struct dbdma_cmd last;
-
-        DEBUG("PlanB: fill_cmd_buff()\n");
-
-        if(pb->overlay_last1 != pb->ch1_cmd) {
-                restore = 1;
-                last = *(pb->overlay_last1);
-        }
-        memset ((void *) pb->ch1_cmd, 0, 2 * pb->tab_size
-                                        * sizeof(struct dbdma_cmd));
-        cmd_buff (pb);
-        if(restore)
-                *(pb->overlay_last1) = last;
-        if(pb->suspended.overlay) {
-                unsigned long jump_addr = in_le32(&pb->overlay_last1->cmd_dep);
-                if(jump_addr != pb->ch1_cmd_phys) {
-                        int i;
-
-                        DEBUG("PlanB: adjusting ch1's jump address\n");
-
-                        for(i = 0; i < MAX_GBUFFERS; i++) {
-                                if(pb->need_pre_capture[i]) {
-                                    if(jump_addr == virt_to_bus(pb->pre_cmd[i]))
-                                        goto found;
-                                } else {
-                                    if(jump_addr == virt_to_bus(pb->cap_cmd[i]))
-                                        goto found;
-                                }
-                        }
-
-                        DEBUG("PlanB: not found...\n");
-
-                        goto out;
-found:
-                        if(pb->need_pre_capture[i])
-                                out_le32(&pb->pre_cmd[i]->phy_addr,
-                                                virt_to_bus(pb->overlay_last1));
-                        else
-                                out_le32(&pb->cap_cmd[i]->phy_addr,
-                                                virt_to_bus(pb->overlay_last1));
-                }
-        }
-out:
-        pb->cmd_buff_inited = 1;
-
-        return;
-}
-
-static void cmd_buff(struct planb *pb)
-{
-        int             i, bpp, count, nlines, stepsize, interlace;
-        unsigned long   base, jump, addr_com, addr_dep;
-        volatile struct dbdma_cmd *c1 = pb->ch1_cmd;
-        volatile struct dbdma_cmd *c2 = pb->ch2_cmd;
-
-        interlace = pb->win.interlace;
-        bpp = pb->win.bpp;
-        count = (bpp * ((pb->win.x + pb->win.width > pb->win.swidth) ?
-                (pb->win.swidth - pb->win.x) : pb->win.width));
-        nlines = ((pb->win.y + pb->win.height > pb->win.sheight) ?
-                (pb->win.sheight - pb->win.y) : pb->win.height);
-
-        /* Do video in: */
-
-        /* Preamble commands: */
-        addr_com = virt_to_bus(c1);
-        addr_dep = virt_to_bus(&c1->cmd_dep);
-        tab_cmd_dbdma(c1++, DBDMA_NOP, 0);
-        jump = virt_to_bus(c1+16); /* 14 by cmd_geo_setup() and 2 for padding */
-        if((c1 = cmd_geo_setup(c1, pb->win.width, pb->win.height, interlace,
-                                        bpp, 1, pb)) == NULL) {
-                printk(KERN_WARNING "PlanB: encountered serious problems\n");
-                tab_cmd_dbdma(pb->ch1_cmd + 1, DBDMA_STOP, 0);
-                tab_cmd_dbdma(pb->ch2_cmd + 1, DBDMA_STOP, 0);
-                return;
-        }
-        tab_cmd_store(c1++, addr_com, (unsigned)(DBDMA_NOP | BR_ALWAYS) << 16);
-        tab_cmd_store(c1++, addr_dep, jump);
-        tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.wait_sel),
-                                                        PLANB_SET(FIELD_SYNC));
-                /* (1) wait for field sync to be set */
-        tab_cmd_dbdma(c1++, DBDMA_NOP | WAIT_IFCLR, 0);
-        tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.br_sel),
-                                                        PLANB_SET(ODD_FIELD));
-                /* wait for field sync to be cleared */
-        tab_cmd_dbdma(c1++, DBDMA_NOP | WAIT_IFSET, 0);
-                /* if not odd field, wait until field sync is set again */
-        tab_cmd_dbdma(c1, DBDMA_NOP | BR_IFSET, virt_to_bus(c1-3)); c1++;
-                /* assert ch_sync to ch2 */
-        tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch2.control),
-                                                        PLANB_SET(CH_SYNC));
-        tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.br_sel),
-                                                        PLANB_SET(DMA_ABORT));
-
-        base = (pb->frame_buffer_phys + pb->offset + pb->win.y * (pb->win.bpl
-                                        + pb->win.pad) + pb->win.x * bpp);
-
-        if (interlace) {
-                stepsize = 2;
-                jump = virt_to_bus(c1 + (nlines + 1) / 2);
-        } else {
-                stepsize = 1;
-                jump = virt_to_bus(c1 + nlines);
-        }
-
-        /* even field data: */
-        for (i=0; i < nlines; i += stepsize, c1++)
-                tab_cmd_gen(c1, INPUT_MORE | KEY_STREAM0 | BR_IFSET,
-                        count, base + i * (pb->win.bpl + pb->win.pad), jump);
-
-        /* For non-interlaced, we use even fields only */
-        if (!interlace)
-                goto cmd_tab_data_end;
-
-        /* Resync to odd field */
-                /* (2) wait for field sync to be set */
-        tab_cmd_dbdma(c1++, DBDMA_NOP | WAIT_IFCLR, 0);
-        tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.br_sel),
-                                                        PLANB_SET(ODD_FIELD));
-                /* wait for field sync to be cleared */
-        tab_cmd_dbdma(c1++, DBDMA_NOP | WAIT_IFSET, 0);
-                /* if not odd field, wait until field sync is set again */
-        tab_cmd_dbdma(c1, DBDMA_NOP | BR_IFCLR, virt_to_bus(c1-3)); c1++;
-                /* assert ch_sync to ch2 */
-        tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch2.control),
-                                                        PLANB_SET(CH_SYNC));
-        tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.br_sel),
-                                                        PLANB_SET(DMA_ABORT));
-
-        /* odd field data: */
-        jump = virt_to_bus(c1 + nlines / 2);
-        for (i=1; i < nlines; i += stepsize, c1++)
-                tab_cmd_gen(c1, INPUT_MORE | KEY_STREAM0 | BR_IFSET, count,
-                        base + i * (pb->win.bpl + pb->win.pad), jump);
-
-        /* And jump back to the start */
-cmd_tab_data_end:
-        pb->overlay_last1 = c1; /* keep a pointer to the last command */
-        tab_cmd_dbdma(c1, DBDMA_NOP | BR_ALWAYS, virt_to_bus(pb->ch1_cmd));
-
-        /* Clipmask command buffer */
-
-        /* Preamble commands: */
-        tab_cmd_dbdma(c2++, DBDMA_NOP, 0);
-        tab_cmd_store(c2++, (unsigned)(&pb->planb_base_phys->ch2.wait_sel),
-                                                        PLANB_SET(CH_SYNC));
-                /* wait until ch1 asserts ch_sync */
-        tab_cmd_dbdma(c2++, DBDMA_NOP | WAIT_IFCLR, 0);
-                /* clear ch_sync asserted by ch1 */
-        tab_cmd_store(c2++, (unsigned)(&pb->planb_base_phys->ch2.control),
-                                                        PLANB_CLR(CH_SYNC));
-        tab_cmd_store(c2++, (unsigned)(&pb->planb_base_phys->ch2.wait_sel),
-                                                        PLANB_SET(FIELD_SYNC));
-        tab_cmd_store(c2++, (unsigned)(&pb->planb_base_phys->ch2.br_sel),
-                                                        PLANB_SET(ODD_FIELD));
-
-        /* jump to end of even field if appropriate */
-        /* this points to (interlace)? pos. C: pos. B */
-        jump = (interlace) ? virt_to_bus(c2 + (nlines + 1) / 2 + 2):
-                                                virt_to_bus(c2 + nlines + 2);
-                /* if odd field, skip over to odd field clipmasking */
-        tab_cmd_dbdma(c2++, DBDMA_NOP | BR_IFSET, jump);
-
-        /* even field mask: */
-        tab_cmd_store(c2++, (unsigned)(&pb->planb_base_phys->ch2.br_sel),
-                                                        PLANB_SET(DMA_ABORT));
-        /* this points to pos. B */
-        jump = (interlace) ? virt_to_bus(c2 + nlines + 1):
-                                                virt_to_bus(c2 + nlines);
-        base = virt_to_bus(pb->mask);
-        for (i=0; i < nlines; i += stepsize, c2++)
-                tab_cmd_gen(c2, OUTPUT_MORE | KEY_STREAM0 | BR_IFSET, 96,
-                        base + i * 96, jump);
-
-        /* For non-interlaced, we use only even fields */
-        if(!interlace)
-                goto cmd_tab_mask_end;
-
-        /* odd field mask: */
-/* C */ tab_cmd_store(c2++, (unsigned)(&pb->planb_base_phys->ch2.br_sel),
-                                                        PLANB_SET(DMA_ABORT));
-        /* this points to pos. B */
-        jump = virt_to_bus(c2 + nlines / 2);
-        base = virt_to_bus(pb->mask);
-        for (i=1; i < nlines; i += 2, c2++)     /* abort if set */
-                tab_cmd_gen(c2, OUTPUT_MORE | KEY_STREAM0 | BR_IFSET, 96,
-                        base + i * 96, jump);
-
-        /* Inform channel 1 and jump back to start */
-cmd_tab_mask_end:
-        /* ok, I just realized this is kind of flawed. */
-        /* this part is reached only after odd field clipmasking. */
-        /* wanna clean up? */
-                /* wait for field sync to be set */
-                /* corresponds to fsync (1) of ch1 */
-/* B */ tab_cmd_dbdma(c2++, DBDMA_NOP | WAIT_IFCLR, 0);
-                /* restart ch1, meant to clear any dead bit or something */
-        tab_cmd_store(c2++, (unsigned)(&pb->planb_base_phys->ch1.control),
-                                                        PLANB_CLR(RUN));
-        tab_cmd_store(c2++, (unsigned)(&pb->planb_base_phys->ch1.control),
-                                                        PLANB_SET(RUN));
-        pb->overlay_last2 = c2; /* keep a pointer to the last command */
-                /* start over even field clipmasking */
-        tab_cmd_dbdma(c2, DBDMA_NOP | BR_ALWAYS, virt_to_bus(pb->ch2_cmd));
-
-        eieio();
-        return;
-}
-
-/*********************************/
-/* grabdisplay support functions */
-/*********************************/
-
-static int palette2fmt[] = {
-        0,
-        PLANB_GRAY,
-        0,
-        0,
-        0,
-        PLANB_COLOUR32,
-        PLANB_COLOUR15,
-        0,
-        0,
-        0,
-        0,
-        0,
-        0,
-        0,
-        0,
-};
-
-#define PLANB_PALETTE_MAX 15
-
-static int vgrab(struct planb *pb, struct video_mmap *mp)
-{
-        unsigned int fr = mp->frame;
-        unsigned int format;
-
-        if(pb->rawbuf==NULL) {
-                int err;
-                if((err=grabbuf_alloc(pb)))
-                        return err;
-        }
-
-        IDEBUG("PlanB: grab %d: %dx%d(%u)\n", pb->grabbing,
-                                                mp->width, mp->height, fr);
-
-        if(pb->grabbing >= MAX_GBUFFERS)
-                return -ENOBUFS;
-        if(fr > (MAX_GBUFFERS - 1) || fr < 0)
-                return -EINVAL;
-        if(mp->height <= 0 || mp->width <= 0)
-                return -EINVAL;
-        if(mp->format < 0 || mp->format >= PLANB_PALETTE_MAX)
-                return -EINVAL;
-        if((format = palette2fmt[mp->format]) == 0)
-                return -EINVAL;
-        if (mp->height * mp->width * format > PLANB_MAX_FBUF) /* format = bpp */
-                return -EINVAL;
-
-        planb_lock(pb);
-        if(mp->width != pb->gwidth[fr] || mp->height != pb->gheight[fr] ||
-                        format != pb->gfmt[fr] || (pb->gnorm_switch[fr])) {
-                int i;
-#ifndef PLANB_GSCANLINE
-                unsigned int osize = pb->gwidth[fr] * pb->gheight[fr]
-                                                                * pb->gfmt[fr];
-                unsigned int nsize = mp->width * mp->height * format;
-#endif
-
-                IDEBUG("PlanB: gwidth = %d, gheight = %d, mp->format = %u\n",
-                                        mp->width, mp->height, mp->format);
-
-#ifndef PLANB_GSCANLINE
-                if(pb->gnorm_switch[fr])
-                        nsize = 0;
-                if (nsize < osize) {
-                        for(i = pb->gbuf_idx[fr]; osize > 0; i++) {
-                                memset((void *)pb->rawbuf[i], 0, PAGE_SIZE);
-                                osize -= PAGE_SIZE;
-                        }
-                }
-                for(i = pb->l_fr_addr_idx[fr]; i < pb->l_fr_addr_idx[fr]
-                                                        + pb->lnum[fr]; i++)
-                        memset((void *)pb->rawbuf[i], 0, PAGE_SIZE);
-#else
-/* XXX TODO */
-/*
-                if(pb->gnorm_switch[fr])
-                        memset((void *)pb->gbuffer[fr], 0,
-                                        pb->gbytes_per_line * pb->gheight[fr]);
-                else {
-                        if(mp->
-                        for(i = 0; i < pb->gheight[fr]; i++) {
-                                memset((void *)(pb->gbuffer[fr]
-                                        + pb->gbytes_per_line * i
-                        }
-                }
-*/
-#endif
-                pb->gwidth[fr] = mp->width;
-                pb->gheight[fr] = mp->height;
-                pb->gfmt[fr] = format;
-                pb->last_cmd[fr] = setup_grab_cmd(fr, pb);
-                planb_pre_capture(fr, pb->gfmt[fr], pb); /* gfmt = bpp */
-                pb->need_pre_capture[fr] = 1;
-                pb->gnorm_switch[fr] = 0;
-        } else
-                pb->need_pre_capture[fr] = 0;
-        pb->frame_stat[fr] = GBUFFER_GRABBING;
-        if(!(ACTIVE & in_le32(&pb->planb_base->ch1.status))) {
-
-                IDEBUG("PlanB: ch1 inactive, initiating grabbing\n");
-
-                planb_dbdma_stop(&pb->planb_base->ch1);
-                if(pb->need_pre_capture[fr]) {
-
-                        IDEBUG("PlanB: padding pre-capture sequence\n");
-
-                        out_le32 (&pb->planb_base->ch1.cmdptr,
-                                                virt_to_bus(pb->pre_cmd[fr]));
-                } else {
-                        tab_cmd_dbdma(pb->last_cmd[fr], DBDMA_STOP, 0);
-                        tab_cmd_dbdma(pb->cap_cmd[fr], DBDMA_NOP, 0);
-                /* let's be on the safe side. here is not timing critical. */
-                        tab_cmd_dbdma((pb->cap_cmd[fr] + 1), DBDMA_NOP, 0);
-                        out_le32 (&pb->planb_base->ch1.cmdptr,
-                                                virt_to_bus(pb->cap_cmd[fr]));
-                }
-                planb_dbdma_restart(&pb->planb_base->ch1);
-                pb->last_fr = fr;
-        } else {
-                int i;
-
-                IDEBUG("PlanB: ch1 active, grabbing being queued\n");
-
-                if((pb->last_fr == -1) || ((pb->last_fr == -2) &&
-                                                overlay_is_active(pb))) {
-
-                        IDEBUG("PlanB: overlay is active, grabbing defered\n");
-
-                        tab_cmd_dbdma(pb->last_cmd[fr],
-                                        DBDMA_NOP | BR_ALWAYS,
-                                        virt_to_bus(pb->ch1_cmd));
-                        if(pb->need_pre_capture[fr]) {
-
-                                IDEBUG("PlanB: padding pre-capture sequence\n");
-
-                                tab_cmd_store(pb->pre_cmd[fr],
-                                    virt_to_bus(&pb->overlay_last1->cmd_dep),
-                                                virt_to_bus(pb->ch1_cmd));
-                                eieio();
-                                out_le32 (&pb->overlay_last1->cmd_dep,
-                                                virt_to_bus(pb->pre_cmd[fr]));
-                        } else {
-                                tab_cmd_store(pb->cap_cmd[fr],
-                                    virt_to_bus(&pb->overlay_last1->cmd_dep),
-                                                virt_to_bus(pb->ch1_cmd));
-                                tab_cmd_dbdma((pb->cap_cmd[fr] + 1),
-                                                                DBDMA_NOP, 0);
-                                eieio();
-                                out_le32 (&pb->overlay_last1->cmd_dep,
-                                                virt_to_bus(pb->cap_cmd[fr]));
-                        }
-                        for(i = 0; overlay_is_active(pb) && i < 999; i++)
-                                IDEBUG("PlanB: waiting for overlay done\n");
-                        tab_cmd_dbdma(pb->ch1_cmd, DBDMA_NOP, 0);
-                        pb->prev_last_fr = fr;
-                        pb->last_fr = -2;
-                } else if(pb->last_fr == -2) {
-
-                        IDEBUG("PlanB: mixed mode detected, grabbing"
-                                " will be done before activating overlay\n");
-
-                        tab_cmd_dbdma(pb->ch1_cmd, DBDMA_NOP, 0);
-                        if(pb->need_pre_capture[fr]) {
-
-                                IDEBUG("PlanB: padding pre-capture sequence\n");
-
-                                tab_cmd_dbdma(pb->last_cmd[pb->prev_last_fr],
-                                                DBDMA_NOP | BR_ALWAYS,
-                                                virt_to_bus(pb->pre_cmd[fr]));
-                                eieio();
-                        } else {
-                                tab_cmd_dbdma(pb->cap_cmd[fr], DBDMA_NOP, 0);
-                                if(pb->gwidth[pb->prev_last_fr] !=
-                                                                pb->gwidth[fr]
-                                        || pb->gheight[pb->prev_last_fr] !=
-                                                                pb->gheight[fr]
-                                        || pb->gfmt[pb->prev_last_fr] !=
-                                                                pb->gfmt[fr])
-                                        tab_cmd_dbdma((pb->cap_cmd[fr] + 1),
-                                                                DBDMA_NOP, 0);
-                                else
-                                        tab_cmd_dbdma((pb->cap_cmd[fr] + 1),
-                                            DBDMA_NOP | BR_ALWAYS,
-                                            virt_to_bus(pb->cap_cmd[fr] + 16));
-                                tab_cmd_dbdma(pb->last_cmd[pb->prev_last_fr],
-                                                DBDMA_NOP | BR_ALWAYS,
-                                                virt_to_bus(pb->cap_cmd[fr]));
-                                eieio();
-                        }
-                        tab_cmd_dbdma(pb->last_cmd[fr],
-                                        DBDMA_NOP | BR_ALWAYS,
-                                        virt_to_bus(pb->ch1_cmd));
-                        eieio();
-                        pb->prev_last_fr = fr;
-                        pb->last_fr = -2;
-                } else {
-
-                        IDEBUG("PlanB: active grabbing session detected\n");
-
-                        if(pb->need_pre_capture[fr]) {
-
-                                IDEBUG("PlanB: padding pre-capture sequence\n");
-
-                                tab_cmd_dbdma(pb->last_cmd[pb->last_fr],
-                                                DBDMA_NOP | BR_ALWAYS,
-                                                virt_to_bus(pb->pre_cmd[fr]));
-                                eieio();
-                        } else {
-                                tab_cmd_dbdma(pb->last_cmd[fr], DBDMA_STOP, 0);
-                                tab_cmd_dbdma(pb->cap_cmd[fr], DBDMA_NOP, 0);
-                                if(pb->gwidth[pb->last_fr] != pb->gwidth[fr]
-                                        || pb->gheight[pb->last_fr] !=
-                                                                pb->gheight[fr]
-                                        || pb->gfmt[pb->last_fr] !=
-                                                                pb->gfmt[fr])
-                                        tab_cmd_dbdma((pb->cap_cmd[fr] + 1),
-                                                                DBDMA_NOP, 0);
-                                else
-                                        tab_cmd_dbdma((pb->cap_cmd[fr] + 1),
-                                            DBDMA_NOP | BR_ALWAYS,
-                                            virt_to_bus(pb->cap_cmd[fr] + 16));
-                                tab_cmd_dbdma(pb->last_cmd[pb->last_fr],
-                                                DBDMA_NOP | BR_ALWAYS,
-                                                virt_to_bus(pb->cap_cmd[fr]));
-                                eieio();
-                        }
-                        pb->last_fr = fr;
-                }
-                if(!(ACTIVE & in_le32(&pb->planb_base->ch1.status))) {
-
-                        IDEBUG("PlanB: became inactive in the mean time..."
-                                "reactivating\n");
-
-                        planb_dbdma_stop(&pb->planb_base->ch1);
-                        out_le32 (&pb->planb_base->ch1.cmdptr,
-                                                virt_to_bus(pb->cap_cmd[fr]));
-                        planb_dbdma_restart(&pb->planb_base->ch1);
-                }
-        }
-        pb->grabbing++;
-        planb_unlock(pb);
-
-        return 0;
-}
-
-static void planb_pre_capture(int fr, int bpp, struct planb *pb)
-{
-        volatile struct dbdma_cmd *c1 = pb->pre_cmd[fr];
-        int interlace = (pb->gheight[fr] > pb->maxlines/2)? 1: 0;
-
-        tab_cmd_dbdma(c1++, DBDMA_NOP, 0);
-        if((c1 = cmd_geo_setup(c1, pb->gwidth[fr], pb->gheight[fr], interlace,
-                                                bpp, 0, pb)) == NULL) {
-                printk(KERN_WARNING "PlanB: encountered some problems\n");
-                tab_cmd_dbdma(pb->pre_cmd[fr] + 1, DBDMA_STOP, 0);
-                return;
-        }
-        /* Sync to even field */
-        tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.wait_sel),
-                PLANB_SET(FIELD_SYNC));
-        tab_cmd_dbdma(c1++, DBDMA_NOP | WAIT_IFCLR, 0);
-        tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.br_sel),
-                PLANB_SET(ODD_FIELD));
-        tab_cmd_dbdma(c1++, DBDMA_NOP | WAIT_IFSET, 0);
-        tab_cmd_dbdma(c1, DBDMA_NOP | BR_IFSET, virt_to_bus(c1-3)); c1++;
-        tab_cmd_dbdma(c1++, DBDMA_NOP | INTR_ALWAYS, 0);
-        tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.br_sel),
-                PLANB_SET(DMA_ABORT));
-        /* For non-interlaced, we use even fields only */
-        if (pb->gheight[fr] <= pb->maxlines/2)
-                goto cmd_tab_data_end;
-        /* Sync to odd field */
-        tab_cmd_dbdma(c1++, DBDMA_NOP | WAIT_IFCLR, 0);
-        tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.br_sel),
-                PLANB_SET(ODD_FIELD));
-        tab_cmd_dbdma(c1++, DBDMA_NOP | WAIT_IFSET, 0);
-        tab_cmd_dbdma(c1, DBDMA_NOP | BR_IFCLR, virt_to_bus(c1-3)); c1++;
-        tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.br_sel),
-                PLANB_SET(DMA_ABORT));
-cmd_tab_data_end:
-        tab_cmd_dbdma(c1, DBDMA_NOP | BR_ALWAYS, virt_to_bus(pb->cap_cmd[fr]));
-
-        eieio();
-}
-
-static volatile struct dbdma_cmd *setup_grab_cmd(int fr, struct planb *pb)
-{
-        int             i, bpp, count, nlines, stepsize, interlace;
-#ifdef PLANB_GSCANLINE
-        int             scanline;
-#else
-        int             nlpp, leftover1;
-        unsigned long   base;
-#endif
-        unsigned long   jump;
-        int             pagei;
-        volatile struct dbdma_cmd *c1;
-        volatile struct dbdma_cmd *jump_addr;
-
-        c1 = pb->cap_cmd[fr];
-        interlace = (pb->gheight[fr] > pb->maxlines/2)? 1: 0;
-        bpp = pb->gfmt[fr];     /* gfmt = bpp */
-        count = bpp * pb->gwidth[fr];
-        nlines = pb->gheight[fr];
-#ifdef PLANB_GSCANLINE
-        scanline = pb->gbytes_per_line;
-#else
-        pb->lsize[fr] = count;
-        pb->lnum[fr] = 0;
-#endif
-
-        /* Do video in: */
-
-        /* Preamble commands: */
-        tab_cmd_dbdma(c1++, DBDMA_NOP, 0);
-        tab_cmd_dbdma(c1, DBDMA_NOP | BR_ALWAYS, virt_to_bus(c1 + 16)); c1++;
-        if((c1 = cmd_geo_setup(c1, pb->gwidth[fr], pb->gheight[fr], interlace,
-                                                bpp, 0, pb)) == NULL) {
-                printk(KERN_WARNING "PlanB: encountered serious problems\n");
-                tab_cmd_dbdma(pb->cap_cmd[fr] + 1, DBDMA_STOP, 0);
-                return (pb->cap_cmd[fr] + 2);
-        }
-        tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.wait_sel),
-                PLANB_SET(FIELD_SYNC));
-        tab_cmd_dbdma(c1++, DBDMA_NOP | WAIT_IFCLR, 0);
-        tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.br_sel),
-                PLANB_SET(ODD_FIELD));
-        tab_cmd_dbdma(c1++, DBDMA_NOP | WAIT_IFSET, 0);
-        tab_cmd_dbdma(c1, DBDMA_NOP | BR_IFSET, virt_to_bus(c1-3)); c1++;
-        tab_cmd_dbdma(c1++, DBDMA_NOP | INTR_ALWAYS, 0);
-        tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.br_sel),
-                PLANB_SET(DMA_ABORT));
-
-        if (interlace) {
-                stepsize = 2;
-                jump_addr = c1 + TAB_FACTOR * (nlines + 1) / 2;
-        } else {
-                stepsize = 1;
-                jump_addr = c1 + TAB_FACTOR * nlines;
-        }
-        jump = virt_to_bus(jump_addr);
-
-        /* even field data: */
-
-        pagei = pb->gbuf_idx[fr];
-#ifdef PLANB_GSCANLINE
-        for (i = 0; i < nlines; i += stepsize) {
-                tab_cmd_gen(c1++, INPUT_MORE | BR_IFSET, count,
-                                        virt_to_bus(pb->rawbuf[pagei
-                                        + i * scanline / PAGE_SIZE]), jump);
-        }
-#else
-        i = 0;
-        leftover1 = 0;
-        do {
-            int j;
-
-            base = virt_to_bus(pb->rawbuf[pagei]);
-            nlpp = (PAGE_SIZE - leftover1) / count / stepsize;
-            for(j = 0; j < nlpp && i < nlines; j++, i += stepsize, c1++)
-                tab_cmd_gen(c1, INPUT_MORE | KEY_STREAM0 | BR_IFSET,
-                          count, base + count * j * stepsize + leftover1, jump);
-            if(i < nlines) {
-                int lov0 = PAGE_SIZE - count * nlpp * stepsize - leftover1;
-
-                if(lov0 == 0)
-                    leftover1 = 0;
-                else {
-                    if(lov0 >= count) {
-                        tab_cmd_gen(c1++, INPUT_MORE | BR_IFSET, count, base
-                                + count * nlpp * stepsize + leftover1, jump);
-                    } else {
-                        pb->l_to_addr[fr][pb->lnum[fr]] = pb->rawbuf[pagei]
-                                        + count * nlpp * stepsize + leftover1;
-                        pb->l_to_next_idx[fr][pb->lnum[fr]] = pagei + 1;
-                        pb->l_to_next_size[fr][pb->lnum[fr]] = count - lov0;
-                        tab_cmd_gen(c1++, INPUT_MORE | BR_IFSET, count,
-                                virt_to_bus(pb->rawbuf[pb->l_fr_addr_idx[fr]
-                                                + pb->lnum[fr]]), jump);
-                        if(++pb->lnum[fr] > MAX_LNUM)
-                                pb->lnum[fr]--;
-                    }
-                    leftover1 = count * stepsize - lov0;
-                    i += stepsize;
-                }
-            }
-            pagei++;
-        } while(i < nlines);
-        tab_cmd_dbdma(c1, DBDMA_NOP | BR_ALWAYS, jump);
-        c1 = jump_addr;
-#endif /* PLANB_GSCANLINE */
-
-        /* For non-interlaced, we use even fields only */
-        if (!interlace)
-                goto cmd_tab_data_end;
-
-        /* Sync to odd field */
-        tab_cmd_dbdma(c1++, DBDMA_NOP | WAIT_IFCLR, 0);
-        tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.br_sel),
-                PLANB_SET(ODD_FIELD));
-        tab_cmd_dbdma(c1++, DBDMA_NOP | WAIT_IFSET, 0);
-        tab_cmd_dbdma(c1, DBDMA_NOP | BR_IFCLR, virt_to_bus(c1-3)); c1++;
-        tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.br_sel),
-                PLANB_SET(DMA_ABORT));
-
-        /* odd field data: */
-        jump_addr = c1 + TAB_FACTOR * nlines / 2;
-        jump = virt_to_bus(jump_addr);
-#ifdef PLANB_GSCANLINE
-        for (i = 1; i < nlines; i += stepsize) {
-                tab_cmd_gen(c1++, INPUT_MORE | BR_IFSET, count,
-                                        virt_to_bus(pb->rawbuf[pagei
-                                        + i * scanline / PAGE_SIZE]), jump);
-        }
-#else
-        i = 1;
-        leftover1 = 0;
-        pagei = pb->gbuf_idx[fr];
-        if(nlines <= 1)
-            goto skip;
-        do {
-            int j;
-
-            base = virt_to_bus(pb->rawbuf[pagei]);
-            nlpp = (PAGE_SIZE - leftover1) / count / stepsize;
-            if(leftover1 >= count) {
-                tab_cmd_gen(c1++, INPUT_MORE | KEY_STREAM0 | BR_IFSET, count,
-                                                base + leftover1 - count, jump);
-                i += stepsize;
-            }
-            for(j = 0; j < nlpp && i < nlines; j++, i += stepsize, c1++)
-                tab_cmd_gen(c1, INPUT_MORE | KEY_STREAM0 | BR_IFSET, count,
-                        base + count * (j * stepsize + 1) + leftover1, jump);
-            if(i < nlines) {
-                int lov0 = PAGE_SIZE - count * nlpp * stepsize - leftover1;
-
-                if(lov0 == 0)
-                    leftover1 = 0;
-                else {
-                    if(lov0 > count) {
-                        pb->l_to_addr[fr][pb->lnum[fr]] = pb->rawbuf[pagei]
-                                + count * (nlpp * stepsize + 1) + leftover1;
-                        pb->l_to_next_idx[fr][pb->lnum[fr]] = pagei + 1;
-                        pb->l_to_next_size[fr][pb->lnum[fr]] = count * stepsize
-                                                                        - lov0;
-                        tab_cmd_gen(c1++, INPUT_MORE | BR_IFSET, count,
-                                virt_to_bus(pb->rawbuf[pb->l_fr_addr_idx[fr]
-                                                        + pb->lnum[fr]]), jump);
-                        if(++pb->lnum[fr] > MAX_LNUM)
-                                pb->lnum[fr]--;
-                        i += stepsize;
-                    }
-                    leftover1 = count * stepsize - lov0;
-                }
-            }
-            pagei++;
-        } while(i < nlines);
-skip:
-        tab_cmd_dbdma(c1, DBDMA_NOP | BR_ALWAYS, jump);
-        c1 = jump_addr;
-#endif /* PLANB_GSCANLINE */
-
-cmd_tab_data_end:
-        tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->intr_stat),
-                        (fr << 9) | PLANB_FRM_IRQ | PLANB_GEN_IRQ);
-        /* stop it */
-        tab_cmd_dbdma(c1, DBDMA_STOP, 0);
-
-        eieio();
-        return c1;
-}
-
-static irqreturn_t planb_irq(int irq, void *dev_id)
-{
-        unsigned int stat, astat;
-        struct planb *pb = (struct planb *)dev_id;
-
-        IDEBUG("PlanB: planb_irq()\n");
-
-        /* get/clear interrupt status bits */
-        eieio();
-        stat = in_le32(&pb->planb_base->intr_stat);
-        astat = stat & pb->intr_mask;
-        out_le32(&pb->planb_base->intr_stat, PLANB_FRM_IRQ
-                                        & ~astat & stat & ~PLANB_GEN_IRQ);
-        IDEBUG("PlanB: stat = %X, astat = %X\n", stat, astat);
-
-        if(astat & PLANB_FRM_IRQ) {
-                unsigned int fr = stat >> 9;
-#ifndef PLANB_GSCANLINE
-                int i;
-#endif
-                IDEBUG("PlanB: PLANB_FRM_IRQ\n");
-
-                pb->gcount++;
-
-                IDEBUG("PlanB: grab %d: fr = %d, gcount = %d\n",
-                                pb->grabbing, fr, pb->gcount);
-#ifndef PLANB_GSCANLINE
-                IDEBUG("PlanB: %d * %d bytes are being copied over\n",
-                                pb->lnum[fr], pb->lsize[fr]);
-                for(i = 0; i < pb->lnum[fr]; i++) {
-                        int first = pb->lsize[fr] - pb->l_to_next_size[fr][i];
-
-                        memcpy(pb->l_to_addr[fr][i],
-                                pb->rawbuf[pb->l_fr_addr_idx[fr] + i],
-                                first);
-                        memcpy(pb->rawbuf[pb->l_to_next_idx[fr][i]],
-                                pb->rawbuf[pb->l_fr_addr_idx[fr] + i] + first,
-                                                pb->l_to_next_size[fr][i]);
-                }
-#endif
-                pb->frame_stat[fr] = GBUFFER_DONE;
-                pb->grabbing--;
-                wake_up_interruptible(&pb->capq);
-                return IRQ_HANDLED;
-        }
-        /* incorrect interrupts? */
-        pb->intr_mask = PLANB_CLR_IRQ;
-        out_le32(&pb->planb_base->intr_stat, PLANB_CLR_IRQ);
-        printk(KERN_ERR "PlanB: IRQ lockup, cleared intrrupts"
-                                                        " unconditionally\n");
-        return IRQ_HANDLED;
-}
-
-/*******************************
- * Device Operations functions *
- *******************************/
-
-static int planb_open(struct video_device *dev, int mode)
-{
-        struct planb *pb = (struct planb *)dev;
-
-        if (pb->user == 0) {
-                int err;
-                if((err = planb_prepare_open(pb)) != 0)
-                        return err;
-        }
-        pb->user++;
-
-        DEBUG("PlanB: device opened\n");
-        return 0;
-}
-
-static void planb_close(struct video_device *dev)
-{
-        struct planb *pb = (struct planb *)dev;
-
-        if(pb->user < 1) /* ??? */
-                return;
-        planb_lock(pb);
-        if (pb->user == 1) {
-                if (pb->overlay) {
-                        planb_dbdma_stop(&pb->planb_base->ch2);
-                        planb_dbdma_stop(&pb->planb_base->ch1);
-                        pb->overlay = 0;
-                }
-                planb_prepare_close(pb);
-        }
-        pb->user--;
-        planb_unlock(pb);
-
-        DEBUG("PlanB: device closed\n");
-}
-
-static long planb_read(struct video_device *v, char *buf, unsigned long count,
-                                int nonblock)
-{
-        DEBUG("planb: read request\n");
-        return -EINVAL;
-}
-
-static long planb_write(struct video_device *v, const char *buf,
-                                unsigned long count, int nonblock)
-{
-        DEBUG("planb: write request\n");
-        return -EINVAL;
-}
-
-static int planb_ioctl(struct video_device *dev, unsigned int cmd, void *arg)
-{
-        struct planb *pb=(struct planb *)dev;
-
-        switch (cmd)
-        {
-                case VIDIOCGCAP:
-                {
-                        struct video_capability b;
-
-                        DEBUG("PlanB: IOCTL VIDIOCGCAP\n");
-
-                        strcpy (b.name, pb->video_dev.name);
-                        b.type = VID_TYPE_OVERLAY | VID_TYPE_CLIPPING |
-                                 VID_TYPE_FRAMERAM | VID_TYPE_SCALES |
-                                 VID_TYPE_CAPTURE;
-                        b.channels = 2; /* composite & svhs */
-                        b.audios = 0;
-                        b.maxwidth = PLANB_MAXPIXELS;
-                        b.maxheight = PLANB_MAXLINES;
-                        b.minwidth = 32; /* wild guess */
-                        b.minheight = 32;
-                        if (copy_to_user(arg,&b,sizeof(b)))
-                                return -EFAULT;
-                        return 0;
-                }
-                case VIDIOCSFBUF:
-                {
-                        struct video_buffer v;
-                        unsigned short bpp;
-                        unsigned int fmt;
-
-                        DEBUG("PlanB: IOCTL VIDIOCSFBUF\n");
-
-                        if (!capable(CAP_SYS_ADMIN)
-                        || !capable(CAP_SYS_RAWIO))
-                                return -EPERM;
-                        if (copy_from_user(&v, arg,sizeof(v)))
-                                return -EFAULT;
-                        planb_lock(pb);
-                        switch(v.depth) {
-                        case 8:
-                                bpp = 1;
-                                fmt = PLANB_GRAY;
-                                break;
-                        case 15:
-                        case 16:
-                                bpp = 2;
-                                fmt = PLANB_COLOUR15;
-                                break;
-                        case 24:
-                        case 32:
-                                bpp = 4;
-                                fmt = PLANB_COLOUR32;
-                                break;
-                        default:
-                                planb_unlock(pb);
-                                return -EINVAL;
-                        }
-                        if (bpp * v.width > v.bytesperline) {
-                                planb_unlock(pb);
-                                return -EINVAL;
-                        }
-                        pb->win.bpp = bpp;
-                        pb->win.color_fmt = fmt;
-                        pb->frame_buffer_phys = (unsigned long) v.base;
-                        pb->win.sheight = v.height;
-                        pb->win.swidth = v.width;
-                        pb->picture.depth = pb->win.depth = v.depth;
-                        pb->win.bpl = pb->win.bpp * pb->win.swidth;
-                        pb->win.pad = v.bytesperline - pb->win.bpl;
-
-                        DEBUG("PlanB: Display at %p is %d by %d, bytedepth %d,"
-                                " bpl %d (+ %d)\n", v.base, v.width,v.height,
-                                pb->win.bpp, pb->win.bpl, pb->win.pad);
-
-                        pb->cmd_buff_inited = 0;
-                        if(pb->overlay) {
-                                suspend_overlay(pb);
-                                fill_cmd_buff(pb);
-                                resume_overlay(pb);
-                        }
-                        planb_unlock(pb);
-                        return 0;
-                }
-                case VIDIOCGFBUF:
-                {
-                        struct video_buffer v;
-
-                        DEBUG("PlanB: IOCTL VIDIOCGFBUF\n");
-
-                        v.base = (void *)pb->frame_buffer_phys;
-                        v.height = pb->win.sheight;
-                        v.width = pb->win.swidth;
-                        v.depth = pb->win.depth;
-                        v.bytesperline = pb->win.bpl + pb->win.pad;
-                        if (copy_to_user(arg, &v, sizeof(v)))
-                                return -EFAULT;
-                        return 0;
-                }
-                case VIDIOCCAPTURE:
-                {
-                        int i;
-
-                        if(copy_from_user(&i, arg, sizeof(i)))
-                                return -EFAULT;
-                        if(i==0) {
-                                DEBUG("PlanB: IOCTL VIDIOCCAPTURE Stop\n");
-
-                                if (!(pb->overlay))
-                                        return 0;
-                                planb_lock(pb);
-                                pb->overlay = 0;
-                                overlay_stop(pb);
-                                planb_unlock(pb);
-                        } else {
-                                DEBUG("PlanB: IOCTL VIDIOCCAPTURE Start\n");
-
-                                if (pb->frame_buffer_phys == 0 ||
-                                          pb->win.width == 0 ||
-                                          pb->win.height == 0)
-                                        return -EINVAL;
-                                if (pb->overlay)
-                                        return 0;
-                                planb_lock(pb);
-                                pb->overlay = 1;
-                                if(!(pb->cmd_buff_inited))
-                                        fill_cmd_buff(pb);
-                                overlay_start(pb);
-                                planb_unlock(pb);
-                        }
-                        return 0;
-                }
-                case VIDIOCGCHAN:
-                {
-                        struct video_channel v;
-
-                        DEBUG("PlanB: IOCTL VIDIOCGCHAN\n");
-
-                        if(copy_from_user(&v, arg,sizeof(v)))
-                                return -EFAULT;
-                        v.flags = 0;
-                        v.tuners = 0;
-                        v.type = VIDEO_TYPE_CAMERA;
-                        v.norm = pb->win.norm;
-                        switch(v.channel)
-                        {
-                        case 0:
-                                strcpy(v.name,"Composite");
-                                break;
-                        case 1:
-                                strcpy(v.name,"SVHS");
-                                break;
-                        default:
-                                return -EINVAL;
-                                break;
-                        }
-                        if(copy_to_user(arg,&v,sizeof(v)))
-                                return -EFAULT;
-
-                        return 0;
-                }
-                case VIDIOCSCHAN:
-                {
-                        struct video_channel v;
-
-                        DEBUG("PlanB: IOCTL VIDIOCSCHAN\n");
-
-                        if(copy_from_user(&v, arg, sizeof(v)))
-                                return -EFAULT;
-
-                        if (v.norm != pb->win.norm) {
-                                int i, maxlines;
-
-                                switch (v.norm)
-                                {
-                                case VIDEO_MODE_PAL:
-                                case VIDEO_MODE_SECAM:
-                                        maxlines = PLANB_MAXLINES;
-                                        break;
-                                case VIDEO_MODE_NTSC:
-                                        maxlines = PLANB_NTSC_MAXLINES;
-                                        break;
-                                default:
-                                        return -EINVAL;
-                                        break;
-                                }
-                                planb_lock(pb);
-                                /* empty the grabbing queue */
-                                wait_event(pb->capq, !pb->grabbing);
-                                pb->maxlines = maxlines;
-                                pb->win.norm = v.norm;
-                                /* Stop overlay if running */
-                                suspend_overlay(pb);
-                                for(i = 0; i < MAX_GBUFFERS; i++)
-                                        pb->gnorm_switch[i] = 1;
-                                /* I know it's an overkill, but.... */
-                                fill_cmd_buff(pb);
-                                /* ok, now init it accordingly */
-                                saa_init_regs (pb);
-                                /* restart overlay if it was running */
-                                resume_overlay(pb);
-                                planb_unlock(pb);
-                        }
-
-                        switch(v.channel)
-                        {
-                        case 0: /* Composite    */
-                                saa_set (SAA7196_IOCC,
-                                        ((saa_regs[pb->win.norm][SAA7196_IOCC] &
-                                          ~7) | 3), pb);
-                                break;
-                        case 1: /* SVHS         */
-                                saa_set (SAA7196_IOCC,
-                                        ((saa_regs[pb->win.norm][SAA7196_IOCC] &
-                                          ~7) | 4), pb);
-                                break;
-                        default:
-                                return -EINVAL;
-                                break;
-                        }
-
-                        return 0;
-                }
-                case VIDIOCGPICT:
-                {
-                        struct video_picture vp = pb->picture;
-
-                        DEBUG("PlanB: IOCTL VIDIOCGPICT\n");
-
-                        switch(pb->win.color_fmt) {
-                        case PLANB_GRAY:
-                                vp.palette = VIDEO_PALETTE_GREY;
-                        case PLANB_COLOUR15:
-                                vp.palette = VIDEO_PALETTE_RGB555;
-                                break;
-                        case PLANB_COLOUR32:
-                                vp.palette = VIDEO_PALETTE_RGB32;
-                                break;
-                        default:
-                                vp.palette = 0;
-                                break;
-                        }
-
-                        if(copy_to_user(arg,&vp,sizeof(vp)))
-                                return -EFAULT;
-                        return 0;
-                }
-                case VIDIOCSPICT:
-                {
-                        struct video_picture vp;
-
-                        DEBUG("PlanB: IOCTL VIDIOCSPICT\n");
-
-                        if(copy_from_user(&vp,arg,sizeof(vp)))
-                                return -EFAULT;
-                        pb->picture = vp;
-                        /* Should we do sanity checks here? */
-                        saa_set (SAA7196_BRIG, (unsigned char)
-                            ((pb->picture.brightness) >> 8), pb);
-                        saa_set (SAA7196_HUEC, (unsigned char)
-                            ((pb->picture.hue) >> 8) ^ 0x80, pb);
-                        saa_set (SAA7196_CSAT, (unsigned char)
-                            ((pb->picture.colour) >> 9), pb);
-                        saa_set (SAA7196_CONT, (unsigned char)
-                            ((pb->picture.contrast) >> 9), pb);
-
-                        return 0;
-                }
-                case VIDIOCSWIN:
-                {
-                        struct video_window     vw;
-                        struct video_clip       clip;
-                        int                     i;
-
-                        DEBUG("PlanB: IOCTL VIDIOCSWIN\n");
-
-                        if(copy_from_user(&vw,arg,sizeof(vw)))
-                                return -EFAULT;
-
-                        planb_lock(pb);
-                        /* Stop overlay if running */
-                        suspend_overlay(pb);
-                        pb->win.interlace = (vw.height > pb->maxlines/2)? 1: 0;
-                        if (pb->win.x != vw.x ||
-                            pb->win.y != vw.y ||
-                            pb->win.width != vw.width ||
-                            pb->win.height != vw.height ||
-                            !pb->cmd_buff_inited) {
-                                pb->win.x = vw.x;
-                                pb->win.y = vw.y;
-                                pb->win.width = vw.width;
-                                pb->win.height = vw.height;
-                                fill_cmd_buff(pb);
-                        }
-                        /* Reset clip mask */
-                        memset ((void *) pb->mask, 0xff, (pb->maxlines
-                                        * ((PLANB_MAXPIXELS + 7) & ~7)) / 8);
-                        /* Add any clip rects */
-                        for (i = 0; i < vw.clipcount; i++) {
-                                if (copy_from_user(&clip, vw.clips + i,
-                                                sizeof(struct video_clip)))
-                                        return -EFAULT;
-                                add_clip(pb, &clip);
-                        }
-                        /* restart overlay if it was running */
-                        resume_overlay(pb);
-                        planb_unlock(pb);
-                        return 0;
-                }
-                case VIDIOCGWIN:
-                {
-                        struct video_window vw;
-
-                        DEBUG("PlanB: IOCTL VIDIOCGWIN\n");
-
-                        vw.x=pb->win.x;
-                        vw.y=pb->win.y;
-                        vw.width=pb->win.width;
-                        vw.height=pb->win.height;
-                        vw.chromakey=0;
-                        vw.flags=0;
-                        if(pb->win.interlace)
-                                vw.flags|=VIDEO_WINDOW_INTERLACE;
-                        if(copy_to_user(arg,&vw,sizeof(vw)))
-                                return -EFAULT;
-                        return 0;
-                }
-                case VIDIOCSYNC: {
-                        int i;
-
-                        IDEBUG("PlanB: IOCTL VIDIOCSYNC\n");
-
-                        if(copy_from_user((void *)&i,arg,sizeof(int)))
-                                return -EFAULT;
-
-                        IDEBUG("PlanB: sync to frame %d\n", i);
-
-                        if(i > (MAX_GBUFFERS - 1) || i < 0)
-                                return -EINVAL;
-chk_grab:
-                        switch (pb->frame_stat[i]) {
-                        case GBUFFER_UNUSED:
-                                return -EINVAL;
-                        case GBUFFER_GRABBING:
-                                IDEBUG("PlanB: waiting for grab"
-                                                        " done (%d)\n", i);
-                                interruptible_sleep_on(&pb->capq);
-                                if(signal_pending(current))
-                                        return -EINTR;
-                                goto chk_grab;
-                        case GBUFFER_DONE:
-                                pb->frame_stat[i] = GBUFFER_UNUSED;
-                                break;
-                        }
-                        return 0;
-                }
-
-                case VIDIOCMCAPTURE:
-                {
-                        struct video_mmap vm;
-                        volatile unsigned int status;
-
-                        IDEBUG("PlanB: IOCTL VIDIOCMCAPTURE\n");
-
-                        if(copy_from_user((void *) &vm,(void *)arg,sizeof(vm)))
-                                return -EFAULT;
-                        status = pb->frame_stat[vm.frame];
-                        if (status != GBUFFER_UNUSED)
-                                return -EBUSY;
-
-                        return vgrab(pb, &vm);
-                }
-
-                case VIDIOCGMBUF:
-                {
-                        int i;
-                        struct video_mbuf vm;
-
-                        DEBUG("PlanB: IOCTL VIDIOCGMBUF\n");
-
-                        memset(&vm, 0 , sizeof(vm));
-                        vm.size = PLANB_MAX_FBUF * MAX_GBUFFERS;
-                        vm.frames = MAX_GBUFFERS;
-                        for(i = 0; i<MAX_GBUFFERS; i++)
-                                vm.offsets[i] = PLANB_MAX_FBUF * i;
-                        if(copy_to_user((void *)arg, (void *)&vm, sizeof(vm)))
-                                return -EFAULT;
-                        return 0;
-                }
-
-                case PLANBIOCGSAAREGS:
-                {
-                        struct planb_saa_regs preg;
-
-                        DEBUG("PlanB: IOCTL PLANBIOCGSAAREGS\n");
-
-                        if(copy_from_user(&preg, arg, sizeof(preg)))
-                                return -EFAULT;
-                        if(preg.addr >= SAA7196_NUMREGS)
-                                return -EINVAL;
-                        preg.val = saa_regs[pb->win.norm][preg.addr];
-                        if(copy_to_user((void *)arg, (void *)&preg,
-                                                                sizeof(preg)))
-                                return -EFAULT;
-                        return 0;
-                }
-
-                case PLANBIOCSSAAREGS:
-                {
-                        struct planb_saa_regs preg;
-
-                        DEBUG("PlanB: IOCTL PLANBIOCSSAAREGS\n");
-
-                        if(copy_from_user(&preg, arg, sizeof(preg)))
-                                return -EFAULT;
-                        if(preg.addr >= SAA7196_NUMREGS)
-                                return -EINVAL;
-                        saa_set (preg.addr, preg.val, pb);
-                        return 0;
-                }
-
-                case PLANBIOCGSTAT:
-                {
-                        struct planb_stat_regs pstat;
-
-                        DEBUG("PlanB: IOCTL PLANBIOCGSTAT\n");
-
-                        pstat.ch1_stat = in_le32(&pb->planb_base->ch1.status);
-                        pstat.ch2_stat = in_le32(&pb->planb_base->ch2.status);
-                        pstat.saa_stat0 = saa_status(0, pb);
-                        pstat.saa_stat1 = saa_status(1, pb);
-
-                        if(copy_to_user((void *)arg, (void *)&pstat,
-                                                        sizeof(pstat)))
-                                return -EFAULT;
-                        return 0;
-                }
-
-                case PLANBIOCSMODE: {
-                        int v;
-
-                        DEBUG("PlanB: IOCTL PLANBIOCSMODE\n");
-
-                        if(copy_from_user(&v, arg, sizeof(v)))
-                                return -EFAULT;
-
-                        switch(v)
-                        {
-                        case PLANB_TV_MODE:
-                                saa_set (SAA7196_STDC,
-                                        (saa_regs[pb->win.norm][SAA7196_STDC] &
-                                          0x7f), pb);
-                                break;
-                        case PLANB_VTR_MODE:
-                                saa_set (SAA7196_STDC,
-                                        (saa_regs[pb->win.norm][SAA7196_STDC] |
-                                          0x80), pb);
-                                break;
-                        default:
-                                return -EINVAL;
-                                break;
-                        }
-                        pb->win.mode = v;
-                        return 0;
-                }
-                case PLANBIOCGMODE: {
-                        int v=pb->win.mode;
-
-                        DEBUG("PlanB: IOCTL PLANBIOCGMODE\n");
-
-                        if(copy_to_user(arg,&v,sizeof(v)))
-                                return -EFAULT;
-                        return 0;
-                }
-#ifdef PLANB_GSCANLINE
-                case PLANBG_GRAB_BPL: {
-                        int v=pb->gbytes_per_line;
-
-                        DEBUG("PlanB: IOCTL PLANBG_GRAB_BPL\n");
-
-                        if(copy_to_user(arg,&v,sizeof(v)))
-                                return -EFAULT;
-                        return 0;
-                }
-#endif /* PLANB_GSCANLINE */
-                case PLANB_INTR_DEBUG: {
-                        int i;
-
-                        DEBUG("PlanB: IOCTL PLANB_INTR_DEBUG\n");
-
-                        if(copy_from_user(&i, arg, sizeof(i)))
-                                return -EFAULT;
-
-                        /* avoid hang ups all together */
-                        for (i = 0; i < MAX_GBUFFERS; i++) {
-                                if(pb->frame_stat[i] == GBUFFER_GRABBING) {
-                                        pb->frame_stat[i] = GBUFFER_DONE;
-                                }
-                        }
-                        if(pb->grabbing)
-                                pb->grabbing--;
-                        wake_up_interruptible(&pb->capq);
-                        return 0;
-                }
-                case PLANB_INV_REGS: {
-                        int i;
-                        struct planb_any_regs any;
-
-                        DEBUG("PlanB: IOCTL PLANB_INV_REGS\n");
-
-                        if(copy_from_user(&any, arg, sizeof(any)))
-                                return -EFAULT;
-                        if(any.offset < 0 || any.offset + any.bytes > 0x400)
-                                return -EINVAL;
-                        if(any.bytes > 128)
-                                return -EINVAL;
-                        for (i = 0; i < any.bytes; i++) {
-                                any.data[i] =
-                                        in_8((unsigned char *)pb->planb_base
-                                                        + any.offset + i);
-                        }
-                        if(copy_to_user(arg,&any,sizeof(any)))
-                                return -EFAULT;
-                        return 0;
-                }
-                default:
-                {
-                        DEBUG("PlanB: Unimplemented IOCTL\n");
-                        return -ENOIOCTLCMD;
-                }
-        /* Some IOCTLs are currently unsupported on PlanB */
-                case VIDIOCGTUNER: {
-                DEBUG("PlanB: IOCTL VIDIOCGTUNER\n");
-                        goto unimplemented; }
-                case VIDIOCSTUNER: {
-                DEBUG("PlanB: IOCTL VIDIOCSTUNER\n");
-                        goto unimplemented; }
-                case VIDIOCSFREQ: {
-                DEBUG("PlanB: IOCTL VIDIOCSFREQ\n");
-                        goto unimplemented; }
-                case VIDIOCGFREQ: {
-                DEBUG("PlanB: IOCTL VIDIOCGFREQ\n");
-                        goto unimplemented; }
-                case VIDIOCKEY: {
-                DEBUG("PlanB: IOCTL VIDIOCKEY\n");
-                        goto unimplemented; }
-                case VIDIOCSAUDIO: {
-                DEBUG("PlanB: IOCTL VIDIOCSAUDIO\n");
-                        goto unimplemented; }
-                case VIDIOCGAUDIO: {
-                DEBUG("PlanB: IOCTL VIDIOCGAUDIO\n");
-                        goto unimplemented; }
-unimplemented:
-                DEBUG("       Unimplemented\n");
-                        return -ENOIOCTLCMD;
-        }
-        return 0;
-}
-
-static int planb_mmap(struct vm_area_struct *vma, struct video_device *dev, const char *adr, unsigned long size)
-{
-        int i;
-        struct planb *pb = (struct planb *)dev;
-        unsigned long start = (unsigned long)adr;
-
-        if (size > MAX_GBUFFERS * PLANB_MAX_FBUF)
-                return -EINVAL;
-        if (!pb->rawbuf) {
-                int err;
-                if((err=grabbuf_alloc(pb)))
-                        return err;
-        }
-        for (i = 0; i < pb->rawbuf_size; i++) {
-                unsigned long pfn;
-
-                pfn = virt_to_phys((void *)pb->rawbuf[i]) >> PAGE_SHIFT;
-                if (remap_pfn_range(vma, start, pfn, PAGE_SIZE, PAGE_SHARED))
-                        return -EAGAIN;
-                start += PAGE_SIZE;
-                if (size <= PAGE_SIZE)
-                        break;
-                size -= PAGE_SIZE;
-        }
-        return 0;
-}
-
-static struct video_device planb_template=
-{
-        .owner          = THIS_MODULE,
-        .name           = PLANB_DEVICE_NAME,
-        .type           = VID_TYPE_OVERLAY,
-        .open           = planb_open,
-        .close          = planb_close,
-        .read           = planb_read,
-        .write          = planb_write,
-        .ioctl          = planb_ioctl,
-        .mmap           = planb_mmap,   /* mmap? */
-};
-
-static int init_planb(struct planb *pb)
-{
-        unsigned char saa_rev;
-        int i, result;
-
-        memset ((void *) &pb->win, 0, sizeof (struct planb_window));
-        /* Simple sanity check */
-        if(def_norm >= NUM_SUPPORTED_NORM || def_norm < 0) {
-                printk(KERN_ERR "PlanB: Option(s) invalid\n");
-                return -2;
-        }
-        pb->win.norm = def_norm;
-        pb->win.mode = PLANB_TV_MODE;   /* TV mode */
-        pb->win.interlace=1;
-        pb->win.x=0;
-        pb->win.y=0;
-        pb->win.width=768; /* 640 */
-        pb->win.height=576; /* 480 */
-        pb->maxlines=576;
-#if 0
-        btv->win.cropwidth=768; /* 640 */
-        btv->win.cropheight=576; /* 480 */
-        btv->win.cropx=0;
-        btv->win.cropy=0;
-#endif
-        pb->win.pad=0;
-        pb->win.bpp=4;
-        pb->win.depth=32;
-        pb->win.color_fmt=PLANB_COLOUR32;
-        pb->win.bpl=1024*pb->win.bpp;
-        pb->win.swidth=1024;
-        pb->win.sheight=768;
-#ifdef PLANB_GSCANLINE
-        if((pb->gbytes_per_line = PLANB_MAXPIXELS * 4) > PAGE_SIZE
-                                || (pb->gbytes_per_line <= 0))
-                return -3;
-        else {
-                /* page align pb->gbytes_per_line for DMA purpose */
-                for(i = PAGE_SIZE; pb->gbytes_per_line < (i>>1);)
-                        i>>=1;
-                pb->gbytes_per_line = i;
-        }
-#endif
-        pb->tab_size = PLANB_MAXLINES + 40;
-        pb->suspend = 0;
-        mutex_init(&pb->lock);
-        pb->ch1_cmd = 0;
-        pb->ch2_cmd = 0;
-        pb->mask = 0;
-        pb->priv_space = 0;
-        pb->offset = 0;
-        pb->user = 0;
-        pb->overlay = 0;
-        init_waitqueue_head(&pb->suspendq);
-        pb->cmd_buff_inited = 0;
-        pb->frame_buffer_phys = 0;
-
-        /* Reset DMA controllers */
-        planb_dbdma_stop(&pb->planb_base->ch2);
-        planb_dbdma_stop(&pb->planb_base->ch1);
-
-        saa_rev =  (saa_status(0, pb) & 0xf0) >> 4;
-        printk(KERN_INFO "PlanB: SAA7196 video processor rev. %d\n", saa_rev);
-        /* Initialize the SAA registers in memory and on chip */
-        saa_init_regs (pb);
-
-        /* clear interrupt mask */
-        pb->intr_mask = PLANB_CLR_IRQ;
-
-        result = request_irq(pb->irq, planb_irq, 0, "PlanB", pb);
-        if (result < 0) {
-                if (result==-EINVAL)
-                        printk(KERN_ERR "PlanB: Bad irq number (%d) "
-                                                "or handler\n", (int)pb->irq);
-                else if (result==-EBUSY)
-                        printk(KERN_ERR "PlanB: I don't know why, "
-                                        "but IRQ %d is busy\n", (int)pb->irq);
-                return result;
-        }
-        disable_irq(pb->irq);
-
-        /* Now add the template and register the device unit. */
-        memcpy(&pb->video_dev,&planb_template,sizeof(planb_template));
-
-        pb->picture.brightness=0x90<<8;
-        pb->picture.contrast = 0x70 << 8;
-        pb->picture.colour = 0x70<<8;
-        pb->picture.hue = 0x8000;
-        pb->picture.whiteness = 0;
-        pb->picture.depth = pb->win.depth;
-
-        pb->frame_stat=NULL;
-        init_waitqueue_head(&pb->capq);
-        for(i=0; i<MAX_GBUFFERS; i++) {
-                pb->gbuf_idx[i] = PLANB_MAX_FBUF * i / PAGE_SIZE;
-                pb->gwidth[i]=0;
-                pb->gheight[i]=0;
-                pb->gfmt[i]=0;
-                pb->cap_cmd[i]=NULL;
-#ifndef PLANB_GSCANLINE
-                pb->l_fr_addr_idx[i] = MAX_GBUFFERS * (PLANB_MAX_FBUF
-                                                / PAGE_SIZE + 1) + MAX_LNUM * i;
-                pb->lsize[i] = 0;
-                pb->lnum[i] = 0;
-#endif
-        }
-        pb->rawbuf=NULL;
-        pb->grabbing=0;
-
-        /* enable interrupts */
-        out_le32(&pb->planb_base->intr_stat, PLANB_CLR_IRQ);
-        pb->intr_mask = PLANB_FRM_IRQ;
-        enable_irq(pb->irq);
-
-        if(video_register_device(&pb->video_dev, VFL_TYPE_GRABBER, video_nr)<0)
-                return -1;
-
-        return 0;
-}
-
-/*
- *      Scan for a PlanB controller, request the irq and map the io memory
- */
-
-static int find_planb(void)
-{
-        struct planb            *pb;
-        struct device_node      *planb_devices;
-        unsigned char           dev_fn, confreg, bus;
-        unsigned int            old_base, new_base;
-        unsigned int            irq;
-        struct pci_dev          *pdev;
-        int rc;
-
-        if (!machine_is(powermac))
-                return 0;
-
-        planb_devices = of_find_node_by_name(NULL, "planb");
-        if (planb_devices == 0) {
-                planb_num=0;
-                printk(KERN_WARNING "PlanB: no device found!\n");
-                return planb_num;
-        }
-
-        if (planb_devices->next != NULL)
-                printk(KERN_ERR "Warning: only using first PlanB device!\n");
-        pb = &planbs[0];
-        planb_num = 1;
-
-        if (planb_devices->n_addrs != 1) {
-                printk (KERN_WARNING "PlanB: expecting 1 address for planb "
-                        "(got %d)", planb_devices->n_addrs);
-                of_node_put(planb_devices);
-                return 0;
-        }
-
-        if (planb_devices->n_intrs == 0) {
-                printk(KERN_WARNING "PlanB: no intrs for device %s\n",
-                       planb_devices->full_name);
-                of_node_put(planb_devices);
-                return 0;
-        } else {
-                irq = planb_devices->intrs[0].line;
-        }
-
-        /* Initialize PlanB's PCI registers */
-
-        /* There is a bug with the way OF assigns addresses
-           to the devices behind the chaos bridge.
-           control needs only 0x1000 of space, but decodes only
-           the upper 16 bits. It therefore occupies a full 64K.
-           OF assigns the planb controller memory within this space;
-           so we need to change that here in order to access planb. */
-
-        /* We remap to 0xf1000000 in hope that nobody uses it ! */
-
-        bus = (planb_devices->addrs[0].space >> 16) & 0xff;
-        dev_fn = (planb_devices->addrs[0].space >> 8) & 0xff;
-        confreg = planb_devices->addrs[0].space & 0xff;
-        old_base = planb_devices->addrs[0].address;
-        new_base = 0xf1000000;
-        of_node_put(planb_devices);
-
-        DEBUG("PlanB: Found on bus %d, dev %d, func %d, "
-                "membase 0x%x (base reg. 0x%x)\n",
-                bus, PCI_SLOT(dev_fn), PCI_FUNC(dev_fn), old_base, confreg);
-
-        pdev = pci_get_bus_and_slot(bus, dev_fn);
-        if (!pdev) {
-                printk(KERN_ERR "planb: cannot find slot\n");
-                goto err_out;
-        }
-
-        /* Enable response in memory space, bus mastering,
-           use memory write and invalidate */
-        rc = pci_enable_device(pdev);
-        if (rc) {
-                printk(KERN_ERR "planb: cannot enable PCI device %s\n",
-                       pci_name(pdev));
-                goto err_out;
-        }
-        rc = pci_set_mwi(pdev);
-        if (rc) {
-                printk(KERN_ERR "planb: cannot enable MWI on PCI device %s\n",
-                       pci_name(pdev));
-                goto err_out_disable;
-        }
-        pci_set_master(pdev);
-
-        /* Set the new base address */
-        pci_write_config_dword (pdev, confreg, new_base);
-
-        planb_regs = (volatile struct planb_registers *)
-                                                ioremap (new_base, 0x400);
-        pb->planb_base = planb_regs;
-        pb->planb_base_phys = (struct planb_registers *)new_base;
-        pb->irq = irq;
-        pb->dev = pdev;
-
-        return planb_num;
-
-err_out_disable:
-        pci_disable_device(pdev);
-err_out:
-        /* FIXME handle error */   /* comment moved from pci_find_slot, above */
-        pci_dev_put(pdev);
-        return 0;
-}
-
-static void release_planb(void)
-{
-        int i;
-        struct planb *pb;
-
-        for (i=0;i<planb_num; i++)
-        {
-                pb=&planbs[i];
-
-                /* stop and flash DMAs unconditionally */
-                planb_dbdma_stop(&pb->planb_base->ch2);
-                planb_dbdma_stop(&pb->planb_base->ch1);
-
-                /* clear and free interrupts */
-                pb->intr_mask = PLANB_CLR_IRQ;
-                out_le32 (&pb->planb_base->intr_stat, PLANB_CLR_IRQ);
-                free_irq(pb->irq, pb);
-
-                /* make sure all allocated memory are freed */
-                planb_prepare_close(pb);
-
-                printk(KERN_INFO "PlanB: unregistering with v4l\n");
-                video_unregister_device(&pb->video_dev);
-
-                pci_dev_put(pb->dev);
-
-                /* note that iounmap() does nothing on the PPC right now */
-                iounmap ((void *)pb->planb_base);
-        }
-}
-
-static int __init init_planbs(void)
-{
-        int i;
-
-        if (find_planb()<=0)
-                return -EIO;
-
-        for (i=0; i<planb_num; i++) {
-                if (init_planb(&planbs[i])<0) {
-                        printk(KERN_ERR "PlanB: error registering device %d"
-                                                        " with v4l\n", i);
-                        release_planb();
-                        return -EIO;
-                }
-                printk(KERN_INFO "PlanB: registered device %d with v4l\n", i);
-        }
-        return 0;
-}
-
-static void __exit exit_planbs(void)
-{
-        release_planb();
-}
-
-module_init(init_planbs);
-module_exit(exit_planbs);
diff --git a/drivers/media/video/planb.h b/drivers/media/video/planb.h
index e21b5735c103..e69de29bb2d1 100644
--- a/drivers/media/video/planb.h
+++ b/drivers/media/video/planb.h
@@ -1,232 +0,0 @@
-/*
-    planb - PlanB frame grabber driver
-
-    PlanB is used in the 7x00/8x00 series of PowerMacintosh
-    Computers as video input DMA controller.
-
-    Copyright (C) 1998 Michel Lanners (mlan@cpu.lu)
-
-    Based largely on the bttv driver by Ralph Metzler (rjkm@thp.uni-koeln.de)
-
-    Additional debugging and coding by Takashi Oe (toe@unlserve.unl.edu)
-
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-/* $Id: planb.h,v 1.13 1999/05/03 19:28:56 mlan Exp $ */
-
-#ifndef _PLANB_H_
-#define _PLANB_H_
-
-#ifdef __KERNEL__
-#include <asm/dbdma.h>
-#include "saa7196.h"
-#endif /* __KERNEL__ */
-
-#define PLANB_DEVICE_NAME       "Apple PlanB Video-In"
-#define PLANB_REV               "1.0"
-
-#ifdef __KERNEL__
-//#define PLANB_GSCANLINE       /* use this if apps have the notion of */
-                                /* grab buffer scanline */
-/* This should be safe for both PAL and NTSC */
-#define PLANB_MAXPIXELS 768
-#define PLANB_MAXLINES 576
-#define PLANB_NTSC_MAXLINES 480
-
-/* Uncomment your preferred norm ;-) */
-#define PLANB_DEF_NORM VIDEO_MODE_PAL
-//#define PLANB_DEF_NORM VIDEO_MODE_NTSC
-//#define PLANB_DEF_NORM VIDEO_MODE_SECAM
-
-/* fields settings */
-#define PLANB_GRAY      0x1     /*  8-bit mono? */
-#define PLANB_COLOUR15  0x2     /* 16-bit mode */
-#define PLANB_COLOUR32  0x4     /* 32-bit mode */
-#define PLANB_CLIPMASK  0x8     /* hardware clipmasking */
-
-/* misc. flags for PlanB DMA operation */
-#define CH_SYNC         0x1     /* synchronize channels (set by ch1;
-                                   cleared by ch2) */
-#define FIELD_SYNC      0x2     /* used for the start of each field
-                                   (0 -> 1 -> 0 for ch1; 0 -> 1 for ch2) */
-#define EVEN_FIELD      0x0     /* even field is detected if unset */
-#define DMA_ABORT       0x2     /* error or just out of sync if set */
-#define ODD_FIELD       0x4     /* odd field is detected if set */
-
-/* for capture operations */
-#define MAX_GBUFFERS    2
-/* note PLANB_MAX_FBUF must be divisible by PAGE_SIZE */
-#ifdef PLANB_GSCANLINE
-#define PLANB_MAX_FBUF  0x240000        /* 576 * 1024 * 4 */
-#define TAB_FACTOR      (1)
-#else
-#define PLANB_MAX_FBUF  0x1b0000        /* 576 * 768 * 4 */
-#define TAB_FACTOR      (2)
-#endif
-#endif /* __KERNEL__ */
-
-struct planb_saa_regs {
-        unsigned char addr;
-        unsigned char val;
-};
-
-struct planb_stat_regs {
-        unsigned int ch1_stat;
-        unsigned int ch2_stat;
-        unsigned char saa_stat0;
-        unsigned char saa_stat1;
-};
-
-struct planb_any_regs {
-        unsigned int offset;
-        unsigned int bytes;
-        unsigned char data[128];
-};
-
-/* planb private ioctls */
-#define PLANBIOCGSAAREGS        _IOWR('v', BASE_VIDIOCPRIVATE, struct planb_saa_regs)   /* Read a saa7196 reg value */
-#define PLANBIOCSSAAREGS        _IOW('v', BASE_VIDIOCPRIVATE + 1, struct planb_saa_regs)        /* Set a saa7196 reg value */
-#define PLANBIOCGSTAT           _IOR('v', BASE_VIDIOCPRIVATE + 2, struct planb_stat_regs)       /* Read planb status */
-#define PLANB_TV_MODE           1
-#define PLANB_VTR_MODE          2
-#define PLANBIOCGMODE           _IOR('v', BASE_VIDIOCPRIVATE + 3, int)  /* Get TV/VTR mode */
-#define PLANBIOCSMODE           _IOW('v', BASE_VIDIOCPRIVATE + 4, int)  /* Set TV/VTR mode */
-
-#ifdef PLANB_GSCANLINE
-#define PLANBG_GRAB_BPL         _IOR('v', BASE_VIDIOCPRIVATE + 5, int)  /* # of bytes per scanline in grab buffer */
-#endif
-
-/* call wake_up_interruptible() with appropriate actions */
-#define PLANB_INTR_DEBUG        _IOW('v', BASE_VIDIOCPRIVATE + 20, int)
-/* investigate which reg does what */
-#define PLANB_INV_REGS          _IOWR('v', BASE_VIDIOCPRIVATE + 21, struct planb_any_regs)
-
-#ifdef __KERNEL__
-
-/* Potentially useful macros */
-#define PLANB_SET(x)    ((x) << 16 | (x))
-#define PLANB_CLR(x)    ((x) << 16)
-
-/* This represents the physical register layout */
-struct planb_registers {
-        volatile struct dbdma_regs      ch1;            /* 0x00: video in */
-        volatile unsigned int           even;           /* 0x40: even field setting */
-        volatile unsigned int           odd;            /* 0x44; odd field setting */
-        unsigned int                    pad1[14];       /* empty? */
-        volatile struct dbdma_regs      ch2;            /* 0x80: clipmask out */
-        unsigned int                    pad2[16];       /* 0xc0: empty? */
-        volatile unsigned int           reg3;           /* 0x100: ???? */
-        volatile unsigned int           intr_stat;      /* 0x104: irq status */
-#define PLANB_CLR_IRQ           0x00            /* clear Plan B interrupt */
-#define PLANB_GEN_IRQ           0x01            /* assert Plan B interrupt */
-#define PLANB_FRM_IRQ           0x0100          /* end of frame */
-        unsigned int                    pad3[1];        /* empty? */
-        volatile unsigned int           reg5;           /* 0x10c: ??? */
-        unsigned int                    pad4[60];       /* empty? */
-        volatile unsigned char          saa_addr;       /* 0x200: SAA subadr */
-        char                            pad5[3];
-        volatile unsigned char          saa_regval;     /* SAA7196 write reg. val */
-        char                            pad6[3];
-        volatile unsigned char          saa_status;     /* SAA7196 status byte */
-        /* There is more unused stuff here */
-};
-
-struct planb_window {
-        int     x, y;
-        ushort  width, height;
-        ushort  bpp, bpl, depth, pad;
-        ushort  swidth, sheight;
-        int     norm;
-        int     interlace;
-        u32     color_fmt;
-        int     chromakey;
-        int     mode;           /* used to switch between TV/VTR modes */
-};
-
-struct planb_suspend {
-        int overlay;
-        int frame;
-        struct dbdma_cmd cmd;
-};
-
-struct planb {
-        struct  video_device video_dev;
-        struct  video_picture picture;          /* Current picture params */
-        struct  video_audio audio_dev;          /* Current audio params */
-
-        volatile struct planb_registers *planb_base;    /* virt base of planb */
-        struct planb_registers *planb_base_phys;        /* phys base of planb */
-        void    *priv_space;                    /* Org. alloc. mem for kfree */
-        int     user;
-        unsigned int tab_size;
-        int     maxlines;
-        struct mutex lock;
-        unsigned int    irq;                    /* interrupt number */
-        volatile unsigned int intr_mask;
-        struct pci_dev *dev;                    /* Our PCI device */
-
-        int     overlay;                        /* overlay running? */
-        struct  planb_window win;
-        unsigned long frame_buffer_phys;        /* We need phys for DMA */
-        int     offset;                         /* offset of pixel 1 */
-        volatile struct dbdma_cmd *ch1_cmd;     /* Video In DMA cmd buffer */
-        volatile struct dbdma_cmd *ch2_cmd;     /* Clip Out DMA cmd buffer */
-        volatile struct dbdma_cmd *overlay_last1;
-        volatile struct dbdma_cmd *overlay_last2;
-        unsigned long ch1_cmd_phys;
-        volatile unsigned char *mask;           /* Clipmask buffer */
-        int suspend;
-        wait_queue_head_t suspendq;
-        struct planb_suspend suspended;
-        int     cmd_buff_inited;                /* cmd buffer inited? */
-
-        int grabbing;
-        unsigned int gcount;
-        wait_queue_head_t capq;
-        int last_fr;
-        int prev_last_fr;
-        unsigned char **rawbuf;
-        int rawbuf_size;
-        int gbuf_idx[MAX_GBUFFERS];
-        volatile struct dbdma_cmd *cap_cmd[MAX_GBUFFERS];
-        volatile struct dbdma_cmd *last_cmd[MAX_GBUFFERS];
-        volatile struct dbdma_cmd *pre_cmd[MAX_GBUFFERS];
-        int need_pre_capture[MAX_GBUFFERS];
-#define PLANB_DUMMY 40  /* # of command buf's allocated for pre-capture seq. */
-        int gwidth[MAX_GBUFFERS], gheight[MAX_GBUFFERS];
-        unsigned int gfmt[MAX_GBUFFERS];
-        int gnorm_switch[MAX_GBUFFERS];
-        volatile unsigned int *frame_stat;
-#define GBUFFER_UNUSED       0x00U
-#define GBUFFER_GRABBING     0x01U
-#define GBUFFER_DONE         0x02U
-#ifdef PLANB_GSCANLINE
-        int gbytes_per_line;
-#else
-#define MAX_LNUM 431    /* change this if PLANB_MAXLINES or */
-                        /* PLANB_MAXPIXELS changes */
-        int l_fr_addr_idx[MAX_GBUFFERS];
-        unsigned char *l_to_addr[MAX_GBUFFERS][MAX_LNUM];
-        int l_to_next_idx[MAX_GBUFFERS][MAX_LNUM];
-        int l_to_next_size[MAX_GBUFFERS][MAX_LNUM];
-        int lsize[MAX_GBUFFERS], lnum[MAX_GBUFFERS];
-#endif
-};
-
-#endif /* __KERNEL__ */
-
-#endif /* _PLANB_H_ */
diff --git a/drivers/media/video/pms.c b/drivers/media/video/pms.c
index 51b1461d8fb6..00425d743656 100644
--- a/drivers/media/video/pms.c
+++ b/drivers/media/video/pms.c
@@ -30,6 +30,7 @@
 #include <asm/io.h>
 #include <linux/videodev.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <linux/mutex.h>
 
 #include <asm/uaccess.h>
@@ -894,9 +895,7 @@ static const struct file_operations pms_fops = {
 
 static struct video_device pms_template=
 {
-        .owner          = THIS_MODULE,
         .name           = "Mediavision PMS",
-        .type           = VID_TYPE_CAPTURE,
         .fops           = &pms_fops,
 };
 
diff --git a/drivers/media/video/pvrusb2/Kconfig b/drivers/media/video/pvrusb2/Kconfig
index 4482b2c72ced..19eb274c9cd0 100644
--- a/drivers/media/video/pvrusb2/Kconfig
+++ b/drivers/media/video/pvrusb2/Kconfig
@@ -2,8 +2,6 @@ config VIDEO_PVRUSB2
         tristate "Hauppauge WinTV-PVR USB2 support"
         depends on VIDEO_V4L2 && I2C
         depends on VIDEO_MEDIA  # Avoids pvrusb = Y / DVB = M
-        depends on HOTPLUG      # due to FW_LOADER
-        select FW_LOADER
         select VIDEO_TUNER
         select VIDEO_TVEEPROM
         select VIDEO_CX2341X
diff --git a/drivers/media/video/pvrusb2/pvrusb2-context.h b/drivers/media/video/pvrusb2/pvrusb2-context.h
index 61801291c2af..d657e53bbfa3 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-context.h
+++ b/drivers/media/video/pvrusb2/pvrusb2-context.h
@@ -16,8 +16,8 @@
  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  *
  */
-#ifndef __PVRUSB2_BASE_H
-#define __PVRUSB2_BASE_H
+#ifndef __PVRUSB2_CONTEXT_H
+#define __PVRUSB2_CONTEXT_H
 
 #include <linux/mutex.h>
 #include <linux/usb.h>
diff --git a/drivers/media/video/pvrusb2/pvrusb2-devattr.c b/drivers/media/video/pvrusb2/pvrusb2-devattr.c
index 5d036e7e3f07..88e175168438 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-devattr.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-devattr.c
@@ -97,13 +97,13 @@ static const struct pvr2_device_desc pvr2_device_24xxx = {
                 .flag_has_cx25840 = !0,
                 .flag_has_wm8775 = !0,
                 .flag_has_hauppauge_rom = !0,
-                .flag_has_hauppauge_custom_ir = !0,
                 .flag_has_analogtuner = !0,
                 .flag_has_fmradio = !0,
                 .flag_has_composite = !0,
                 .flag_has_svideo = !0,
                 .signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE,
                 .led_scheme = PVR2_LED_SCHEME_HAUPPAUGE,
+                .ir_scheme = PVR2_IR_SCHEME_24XXX,
 };
 
 
@@ -330,7 +330,7 @@ static const char *pvr2_fw1_names_73xxx[] = {
 };
 
 static const struct pvr2_device_desc pvr2_device_73xxx = {
-                .description = "WinTV PVR USB2 Model Category 73xxx",
+                .description = "WinTV HVR-1900 Model Category 73xxx",
                 .shortname = "73xxx",
                 .client_modules.lst = pvr2_client_73xxx,
                 .client_modules.cnt = ARRAY_SIZE(pvr2_client_73xxx),
@@ -344,6 +344,7 @@ static const struct pvr2_device_desc pvr2_device_73xxx = {
                 .signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE,
                 .digital_control_scheme = PVR2_DIGITAL_SCHEME_HAUPPAUGE,
                 .led_scheme = PVR2_LED_SCHEME_HAUPPAUGE,
+                .ir_scheme = PVR2_IR_SCHEME_ZILOG,
 #ifdef CONFIG_VIDEO_PVRUSB2_DVB
                 .dvb_props = &pvr2_73xxx_dvb_props,
 #endif
@@ -438,7 +439,7 @@ static const char *pvr2_fw1_names_75xxx[] = {
 };
 
 static const struct pvr2_device_desc pvr2_device_750xx = {
-                .description = "WinTV PVR USB2 Model Category 750xx",
+                .description = "WinTV HVR-1950 Model Category 750xx",
                 .shortname = "750xx",
                 .client_modules.lst = pvr2_client_75xxx,
                 .client_modules.cnt = ARRAY_SIZE(pvr2_client_75xxx),
@@ -453,13 +454,14 @@ static const struct pvr2_device_desc pvr2_device_750xx = {
                 .digital_control_scheme = PVR2_DIGITAL_SCHEME_HAUPPAUGE,
                 .default_std_mask = V4L2_STD_NTSC_M,
                 .led_scheme = PVR2_LED_SCHEME_HAUPPAUGE,
+                .ir_scheme = PVR2_IR_SCHEME_ZILOG,
 #ifdef CONFIG_VIDEO_PVRUSB2_DVB
                 .dvb_props = &pvr2_750xx_dvb_props,
 #endif
 };
 
 static const struct pvr2_device_desc pvr2_device_751xx = {
-                .description = "WinTV PVR USB2 Model Category 751xx",
+                .description = "WinTV HVR-1950 Model Category 751xx",
                 .shortname = "751xx",
                 .client_modules.lst = pvr2_client_75xxx,
                 .client_modules.cnt = ARRAY_SIZE(pvr2_client_75xxx),
@@ -474,6 +476,7 @@ static const struct pvr2_device_desc pvr2_device_751xx = {
                 .digital_control_scheme = PVR2_DIGITAL_SCHEME_HAUPPAUGE,
                 .default_std_mask = V4L2_STD_NTSC_M,
                 .led_scheme = PVR2_LED_SCHEME_HAUPPAUGE,
+                .ir_scheme = PVR2_IR_SCHEME_ZILOG,
 #ifdef CONFIG_VIDEO_PVRUSB2_DVB
                 .dvb_props = &pvr2_751xx_dvb_props,
 #endif
diff --git a/drivers/media/video/pvrusb2/pvrusb2-devattr.h b/drivers/media/video/pvrusb2/pvrusb2-devattr.h
index e23ce1d2edd7..cb3a33eb0276 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-devattr.h
+++ b/drivers/media/video/pvrusb2/pvrusb2-devattr.h
@@ -48,6 +48,10 @@ struct pvr2_string_table {
 #define PVR2_LED_SCHEME_NONE 0
 #define PVR2_LED_SCHEME_HAUPPAUGE 1
 
+#define PVR2_IR_SCHEME_NONE 0
+#define PVR2_IR_SCHEME_24XXX 1
+#define PVR2_IR_SCHEME_ZILOG 2
+
 /* This describes a particular hardware type (except for the USB device ID
    which must live in a separate structure due to environmental
    constraints).  See the top of pvrusb2-hdw.c for where this is
@@ -126,15 +130,19 @@ struct pvr2_device_desc {
            ensure that it is found. */
         unsigned int flag_has_wm8775:1;
 
-        /* Device has IR hardware that can be faked into looking like a
-           normal Hauppauge i2c IR receiver.  This is currently very
-           specific to the 24xxx device, where Hauppauge had replaced their
-           'standard' I2C IR receiver with a bunch of FPGA logic controlled
-           directly via the FX2.  Turning this on tells the pvrusb2 driver
-           to virtualize the presence of the non-existant IR receiver chip and
-           implement the virtual receiver in terms of appropriate FX2
-           commands. */
-        unsigned int flag_has_hauppauge_custom_ir:1;
+        /* Indicate any specialized IR scheme that might need to be
+           supported by this driver.  If not set, then it is assumed that
+           IR can work without help from the driver (which is frequently
+           the case).  This is otherwise set to one of
+           PVR2_IR_SCHEME_xxxx.  For "xxxx", the value "24XXX" indicates a
+           Hauppauge 24xxx class device which has an FPGA-hosted IR
+           receiver that can only be reached via FX2 command codes.  In
+           that case the pvrusb2 driver will emulate the behavior of the
+           older 29xxx device's IR receiver (a "virtual" I2C chip) in terms
+           of those command codes.  For the value "ZILOG", we're dealing
+           with an IR chip that must be taken out of reset via another FX2
+           command code (which is the case for HVR-1950 devices). */
+        unsigned int ir_scheme:2;
 
         /* These bits define which kinds of sources the device can handle.
            Note: Digital tuner presence is inferred by the
diff --git a/drivers/media/video/pvrusb2/pvrusb2-fx2-cmd.h b/drivers/media/video/pvrusb2/pvrusb2-fx2-cmd.h
index b58369e7f30b..614755ea2ea3 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-fx2-cmd.h
+++ b/drivers/media/video/pvrusb2/pvrusb2-fx2-cmd.h
@@ -24,6 +24,8 @@
 #define FX2CMD_MEM_WRITE_DWORD  0x01u
 #define FX2CMD_MEM_READ_DWORD   0x02u
 
+#define FX2CMD_HCW_ZILOG_RESET  0x10u /* 1=reset 0=release */
+
 #define FX2CMD_MEM_READ_64BYTES 0x28u
 
 #define FX2CMD_REG_WRITE        0x04u
diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c
index a5217a2cf4c0..f051c6aa7f1f 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c
@@ -250,6 +250,7 @@ struct pvr2_fx2cmd_descdef {
 static const struct pvr2_fx2cmd_descdef pvr2_fx2cmd_desc[] = {
         {FX2CMD_MEM_WRITE_DWORD, "write encoder dword"},
         {FX2CMD_MEM_READ_DWORD, "read encoder dword"},
+        {FX2CMD_HCW_ZILOG_RESET, "zilog IR reset control"},
         {FX2CMD_MEM_READ_64BYTES, "read encoder 64bytes"},
         {FX2CMD_REG_WRITE, "write encoder register"},
         {FX2CMD_REG_READ, "read encoder register"},
@@ -1711,6 +1712,14 @@ static void pvr2_hdw_setup_low(struct pvr2_hdw *hdw)
                 if (!pvr2_hdw_dev_ok(hdw)) return;
         }
 
+        /* Take the IR chip out of reset, if appropriate */
+        if (hdw->hdw_desc->ir_scheme == PVR2_IR_SCHEME_ZILOG) {
+                pvr2_issue_simple_cmd(hdw,
+                                      FX2CMD_HCW_ZILOG_RESET |
+                                      (1 << 8) |
+                                      ((0) << 16));
+        }
+
         // This step MUST happen after the earlier powerup step.
         pvr2_i2c_core_init(hdw);
         if (!pvr2_hdw_dev_ok(hdw)) return;
diff --git a/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c b/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c
index 9d3c18b24744..e600576a6c4b 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c
@@ -979,7 +979,9 @@ void pvr2_i2c_core_init(struct pvr2_hdw *hdw)
                 printk(KERN_INFO "%s: IR disabled\n",hdw->name);
                 hdw->i2c_func[0x18] = i2c_black_hole;
         } else if (ir_mode[hdw->unit_number] == 1) {
-                if (hdw->hdw_desc->flag_has_hauppauge_custom_ir) {
+                if (hdw->hdw_desc->ir_scheme == PVR2_IR_SCHEME_24XXX) {
+                        /* This comment is present PURELY to get
+                           checkpatch.pl to STFU.  Lovely, eh? */
                         hdw->i2c_func[0x18] = i2c_24xxx_ir;
                 }
         }
diff --git a/drivers/media/video/pvrusb2/pvrusb2-v4l2.c b/drivers/media/video/pvrusb2/pvrusb2-v4l2.c
index 0d72dc470fef..00306faeac01 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-v4l2.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-v4l2.c
@@ -30,6 +30,7 @@
 #include <linux/videodev2.h>
 #include <media/v4l2-dev.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 
 struct pvr2_v4l2_dev;
 struct pvr2_v4l2_fh;
@@ -1160,11 +1161,6 @@ static const struct file_operations vdev_fops = {
 
 
 static struct video_device vdev_template = {
-        .owner      = THIS_MODULE,
-        .type       = VID_TYPE_CAPTURE | VID_TYPE_TUNER,
-        .type2      = (V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_VBI_CAPTURE
-                       | V4L2_CAP_TUNER | V4L2_CAP_AUDIO
-                       | V4L2_CAP_READWRITE),
         .fops       = &vdev_fops,
 };
 
diff --git a/drivers/media/video/pwc/pwc-if.c b/drivers/media/video/pwc/pwc-if.c
index 423fa7c2d0c9..9aee7cb6f79a 100644
--- a/drivers/media/video/pwc/pwc-if.c
+++ b/drivers/media/video/pwc/pwc-if.c
@@ -165,9 +165,7 @@ static const struct file_operations pwc_fops = {
         .llseek =       no_llseek,
 };
 static struct video_device pwc_template = {
-        .owner =        THIS_MODULE,
         .name =         "Philips Webcam",       /* Filled in later */
-        .type =         VID_TYPE_CAPTURE,
         .release =      video_device_release,
         .fops =         &pwc_fops,
         .minor =        -1,
@@ -1048,19 +1046,20 @@ static int pwc_create_sysfs_files(struct video_device *vdev)
         struct pwc_device *pdev = video_get_drvdata(vdev);
         int rc;
 
-        rc = video_device_create_file(vdev, &dev_attr_button);
+        rc = device_create_file(&vdev->dev, &dev_attr_button);
         if (rc)
                 goto err;
         if (pdev->features & FEATURE_MOTOR_PANTILT) {
-                rc = video_device_create_file(vdev, &dev_attr_pan_tilt);
+                rc = device_create_file(&vdev->dev, &dev_attr_pan_tilt);
                 if (rc) goto err_button;
         }
 
         return 0;
 
 err_button:
-        video_device_remove_file(vdev, &dev_attr_button);
+        device_remove_file(&vdev->dev, &dev_attr_button);
 err:
+        PWC_ERROR("Could not create sysfs files.\n");
         return rc;
 }
 
@@ -1068,8 +1067,8 @@ static void pwc_remove_sysfs_files(struct video_device *vdev)
 {
         struct pwc_device *pdev = video_get_drvdata(vdev);
         if (pdev->features & FEATURE_MOTOR_PANTILT)
-                video_device_remove_file(vdev, &dev_attr_pan_tilt);
-        video_device_remove_file(vdev, &dev_attr_button);
+                device_remove_file(&vdev->dev, &dev_attr_pan_tilt);
+        device_remove_file(&vdev->dev, &dev_attr_button);
 }
 
 #ifdef CONFIG_USB_PWC_DEBUG
@@ -1767,9 +1766,8 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id
                 return -ENOMEM;
         }
         memcpy(pdev->vdev, &pwc_template, sizeof(pwc_template));
-        pdev->vdev->dev = &(udev->dev);
+        pdev->vdev->parent = &(udev->dev);
         strcpy(pdev->vdev->name, name);
-        pdev->vdev->owner = THIS_MODULE;
         video_set_drvdata(pdev->vdev, pdev);
 
         pdev->release = le16_to_cpu(udev->descriptor.bcdDevice);
diff --git a/drivers/media/video/pwc/pwc.h b/drivers/media/video/pwc/pwc.h
index 8e8e5b27e77e..74178754b39b 100644
--- a/drivers/media/video/pwc/pwc.h
+++ b/drivers/media/video/pwc/pwc.h
@@ -32,9 +32,11 @@
 #include <linux/smp_lock.h>
 #include <linux/version.h>
 #include <linux/mutex.h>
+#include <linux/mm.h>
 #include <asm/errno.h>
 #include <linux/videodev.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 
 #include "pwc-uncompress.h"
 #include <media/pwc-ioctl.h>
diff --git a/drivers/media/video/s2255drv.c b/drivers/media/video/s2255drv.c
index 04eb2c3fabd8..b1d09d8e2b85 100644
--- a/drivers/media/video/s2255drv.c
+++ b/drivers/media/video/s2255drv.c
@@ -47,8 +47,10 @@
 #include <linux/mutex.h>
 #include <linux/videodev2.h>
 #include <linux/version.h>
+#include <linux/mm.h>
 #include <media/videobuf-vmalloc.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <linux/vmalloc.h>
 #include <linux/usb.h>
 
@@ -184,6 +186,7 @@ struct s2255_dmaqueue {
 #define S2255_FW_LOADED_DSPWAIT 1
 #define S2255_FW_SUCCESS        2
 #define S2255_FW_FAILED         3
+#define S2255_FW_DISCONNECTING  4
 
 struct s2255_fw {
         int                   fw_loaded;
@@ -263,7 +266,6 @@ struct s2255_buffer {
 
 struct s2255_fh {
         struct s2255_dev        *dev;
-        unsigned int            resources;
         const struct s2255_fmt  *fmt;
         unsigned int            width;
         unsigned int            height;
@@ -273,14 +275,9 @@ struct s2255_fh {
         /* mode below is the desired mode.
            mode in s2255_dev is the current mode that was last set */
         struct s2255_mode       mode;
+        int                     resources[MAX_CHANNELS];
 };
 
-/*
- * TODO: fixme S2255_MAX_USERS. Do not limit open driver handles.
- * Limit V4L to one stream at a time.
- */
-#define S2255_MAX_USERS         1
-
 #define CUR_USB_FWVER   774     /* current cypress EEPROM firmware version */
 #define S2255_MAJOR_VERSION     1
 #define S2255_MINOR_VERSION     13
@@ -476,10 +473,9 @@ static void s2255_timer(unsigned long user_data)
         dprintk(100, "s2255 timer\n");
         if (usb_submit_urb(data->fw_urb, GFP_ATOMIC) < 0) {
                 printk(KERN_ERR "s2255: can't submit urb\n");
-                if (data->fw) {
-                        release_firmware(data->fw);
-                        data->fw = NULL;
-                }
+                atomic_set(&data->fw_state, S2255_FW_FAILED);
+                /* wake up anything waiting for the firmware */
+                wake_up(&data->wait_fw);
                 return;
         }
 }
@@ -509,13 +505,18 @@ static void s2255_fwchunk_complete(struct urb *urb)
         struct usb_device *udev = urb->dev;
         int len;
         dprintk(100, "udev %p urb %p", udev, urb);
-        /* TODO: fixme.  reflect change in status */
         if (urb->status) {
                 dev_err(&udev->dev, "URB failed with status %d", urb->status);
+                atomic_set(&data->fw_state, S2255_FW_FAILED);
+                /* wake up anything waiting for the firmware */
+                wake_up(&data->wait_fw);
                 return;
         }
         if (data->fw_urb == NULL) {
-                dev_err(&udev->dev, "early disconncect\n");
+                dev_err(&udev->dev, "s2255 disconnected\n");
+                atomic_set(&data->fw_state, S2255_FW_FAILED);
+                /* wake up anything waiting for the firmware */
+                wake_up(&data->wait_fw);
                 return;
         }
 #define CHUNK_SIZE 512
@@ -789,7 +790,8 @@ static int res_get(struct s2255_dev *dev, struct s2255_fh *fh)
         }
         /* it's free, grab it */
         dev->resources[fh->channel] = 1;
-        dprintk(1, "res: get\n");
+        fh->resources[fh->channel] = 1;
+        dprintk(1, "s2255: res: get\n");
         mutex_unlock(&dev->lock);
         return 1;
 }
@@ -799,9 +801,18 @@ static int res_locked(struct s2255_dev *dev, struct s2255_fh *fh)
         return dev->resources[fh->channel];
 }
 
+static int res_check(struct s2255_fh *fh)
+{
+        return fh->resources[fh->channel];
+}
+
+
 static void res_free(struct s2255_dev *dev, struct s2255_fh *fh)
 {
+        mutex_lock(&dev->lock);
         dev->resources[fh->channel] = 0;
+        fh->resources[fh->channel] = 0;
+        mutex_unlock(&dev->lock);
         dprintk(1, "res: put\n");
 }
 
@@ -1232,7 +1243,7 @@ static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type i)
         }
 
         if (!res_get(dev, fh)) {
-                dev_err(&dev->udev->dev, "res get busy\n");
+                dev_err(&dev->udev->dev, "s2255: stream busy\n");
                 return -EBUSY;
         }
 
@@ -1288,8 +1299,10 @@ static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type i)
         }
         s2255_stop_acquire(dev, fh->channel);
         res = videobuf_streamoff(&fh->vb_vidq);
+        if (res < 0)
+                return res;
         res_free(dev, fh);
-        return res;
+        return 0;
 }
 
 static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id *i)
@@ -1462,12 +1475,7 @@ static int s2255_open(struct inode *inode, struct file *file)
         mutex_lock(&dev->open_lock);
 
         dev->users[cur_channel]++;
-        if (dev->users[cur_channel] > S2255_MAX_USERS) {
-                dev->users[cur_channel]--;
-                mutex_unlock(&dev->open_lock);
-                printk(KERN_INFO "s2255drv: too many open handles!\n");
-                return -EBUSY;
-        }
+        dprintk(4, "s2255: open_handles %d\n", dev->users[cur_channel]);
 
         if (atomic_read(&dev->fw_data->fw_state) == S2255_FW_FAILED) {
                 err("2255 firmware load failed. retrying.\n");
@@ -1478,7 +1486,8 @@ static int s2255_open(struct inode *inode, struct file *file)
                                    msecs_to_jiffies(S2255_LOAD_TIMEOUT));
                 if (atomic_read(&dev->fw_data->fw_state)
                     != S2255_FW_SUCCESS) {
-                        printk(KERN_INFO "2255 FW load failed after 2 tries\n");
+                        printk(KERN_INFO "2255 FW load failed.\n");
+                        dev->users[cur_channel]--;
                         mutex_unlock(&dev->open_lock);
                         return -EFAULT;
                 }
@@ -1494,6 +1503,7 @@ static int s2255_open(struct inode *inode, struct file *file)
                     != S2255_FW_SUCCESS) {
                         printk(KERN_INFO "2255 firmware not loaded"
                                "try again\n");
+                        dev->users[cur_channel]--;
                         mutex_unlock(&dev->open_lock);
                         return -EBUSY;
                 }
@@ -1502,6 +1512,7 @@ static int s2255_open(struct inode *inode, struct file *file)
         /* allocate + initialize per filehandle data */
         fh = kzalloc(sizeof(*fh), GFP_KERNEL);
         if (NULL == fh) {
+                dev->users[cur_channel]--;
                 mutex_unlock(&dev->open_lock);
                 return -ENOMEM;
         }
@@ -1561,44 +1572,48 @@ static void s2255_destroy(struct kref *kref)
                 printk(KERN_ERR "s2255drv: kref problem\n");
                 return;
         }
+
+        /*
+         * Wake up any firmware load waiting (only done in .open,
+         * which holds the open_lock mutex)
+         */
+        atomic_set(&dev->fw_data->fw_state, S2255_FW_DISCONNECTING);
+        wake_up(&dev->fw_data->wait_fw);
+
         /* prevent s2255_disconnect from racing s2255_open */
         mutex_lock(&dev->open_lock);
         s2255_exit_v4l(dev);
-        /* device unregistered so no longer possible to open. open_mutex
-           can be unlocked */
+        /*
+         * device unregistered so no longer possible to open. open_mutex
+         *  can be unlocked and timers deleted afterwards.
+         */
         mutex_unlock(&dev->open_lock);
 
         /* board shutdown stops the read pipe if it is running */
         s2255_board_shutdown(dev);
 
         /* make sure firmware still not trying to load */
+        del_timer(&dev->timer);  /* only started in .probe and .open */
+
         if (dev->fw_data->fw_urb) {
                 dprintk(2, "kill fw_urb\n");
                 usb_kill_urb(dev->fw_data->fw_urb);
                 usb_free_urb(dev->fw_data->fw_urb);
                 dev->fw_data->fw_urb = NULL;
         }
+
         /*
-         * TODO: fixme(above, below): potentially leaving timers alive.
-         *                            do not ignore timeout below if
-         *                            it occurs.
+         * delete the dsp_wait timer, which sets the firmware
+         * state on completion.  This is done before fw_data
+         * is freed below.
          */
 
-        /* make sure we aren't waiting for the DSP */
-        if (atomic_read(&dev->fw_data->fw_state) == S2255_FW_LOADED_DSPWAIT) {
-                /* if we are, wait for the wakeup for fw_success or timeout */
-                wait_event_timeout(dev->fw_data->wait_fw,
-                                   (atomic_read(&dev->fw_data->fw_state)
-                                   == S2255_FW_SUCCESS),
-                                   msecs_to_jiffies(S2255_LOAD_TIMEOUT));
-        }
+        del_timer(&dev->fw_data->dsp_wait); /* only started in .open */
 
-        if (dev->fw_data) {
-                if (dev->fw_data->fw)
-                        release_firmware(dev->fw_data->fw);
-                kfree(dev->fw_data->pfw_data);
-                kfree(dev->fw_data);
-        }
+        if (dev->fw_data->fw)
+                release_firmware(dev->fw_data->fw);
+        kfree(dev->fw_data->pfw_data);
+        kfree(dev->fw_data);
 
         usb_put_dev(dev->udev);
         dprintk(1, "%s", __func__);
@@ -1615,17 +1630,23 @@ static int s2255_close(struct inode *inode, struct file *file)
 
         mutex_lock(&dev->open_lock);
 
-        if (dev->b_acquire[fh->channel])
-                s2255_stop_acquire(dev, fh->channel);
-        res_free(dev, fh);
+        /* turn off stream */
+        if (res_check(fh)) {
+                if (dev->b_acquire[fh->channel])
+                        s2255_stop_acquire(dev, fh->channel);
+                videobuf_streamoff(&fh->vb_vidq);
+                res_free(dev, fh);
+        }
+
         videobuf_mmap_free(&fh->vb_vidq);
-        kfree(fh);
         dev->users[fh->channel]--;
+
         mutex_unlock(&dev->open_lock);
 
         kref_put(&dev->kref, s2255_destroy);
         dprintk(1, "s2255: close called (minor=%d, users=%d)\n",
                 minor, dev->users[fh->channel]);
+        kfree(fh);
         return 0;
 }
 
@@ -1658,12 +1679,7 @@ static const struct file_operations s2255_fops_v4l = {
         .llseek = no_llseek,
 };
 
-static struct video_device template = {
-        .name = "s2255v",
-        .type = VID_TYPE_CAPTURE,
-        .fops = &s2255_fops_v4l,
-        .minor = -1,
-        .release = video_device_release,
+static const struct v4l2_ioctl_ops s2255_ioctl_ops = {
         .vidioc_querycap = vidioc_querycap,
         .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap,
         .vidioc_g_fmt_vid_cap = vidioc_g_fmt_vid_cap,
@@ -1685,6 +1701,14 @@ static struct video_device template = {
 #ifdef CONFIG_VIDEO_V4L1_COMPAT
         .vidiocgmbuf = vidioc_cgmbuf,
 #endif
+};
+
+static struct video_device template = {
+        .name = "s2255v",
+        .fops = &s2255_fops_v4l,
+        .ioctl_ops = &s2255_ioctl_ops,
+        .minor = -1,
+        .release = video_device_release,
         .tvnorms = S2255_NORMS,
         .current_norm = V4L2_STD_NTSC_M,
 };
@@ -1706,7 +1730,7 @@ static int s2255_probe_v4l(struct s2255_dev *dev)
                 /* register 4 video devices */
                 dev->vdev[i] = video_device_alloc();
                 memcpy(dev->vdev[i], &template, sizeof(struct video_device));
-                dev->vdev[i]->dev = &dev->interface->dev;
+                dev->vdev[i]->parent = &dev->interface->dev;
                 if (video_nr == -1)
                         ret = video_register_device(dev->vdev[i],
                                                     VFL_TYPE_GRABBER,
diff --git a/drivers/media/video/saa5246a.c b/drivers/media/video/saa5246a.c
index 03e772130b55..6ee63e69b36c 100644
--- a/drivers/media/video/saa5246a.c
+++ b/drivers/media/video/saa5246a.c
@@ -46,6 +46,7 @@
 #include <linux/videotext.h>
 #include <linux/videodev.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <linux/mutex.h>
 
 #include "saa5246a.h"
@@ -829,9 +830,7 @@ static const struct file_operations saa_fops = {
 
 static struct video_device saa_template =
 {
-        .owner    = THIS_MODULE,
         .name     = IF_NAME,
-        .type     = VID_TYPE_TELETEXT,
         .fops     = &saa_fops,
         .release  = video_device_release,
         .minor    = -1,
diff --git a/drivers/media/video/saa5249.c b/drivers/media/video/saa5249.c
index fde99d9ee71f..0d639738d4e6 100644
--- a/drivers/media/video/saa5249.c
+++ b/drivers/media/video/saa5249.c
@@ -57,6 +57,7 @@
 #include <linux/videotext.h>
 #include <linux/videodev.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <linux/mutex.h>
 
 
@@ -710,9 +711,7 @@ static const struct file_operations saa_fops = {
 
 static struct video_device saa_template =
 {
-        .owner          = THIS_MODULE,
         .name           = IF_NAME,
-        .type           = VID_TYPE_TELETEXT,    /*| VID_TYPE_TUNER ?? */
         .fops           = &saa_fops,
 };
 
diff --git a/drivers/media/video/saa7134/Kconfig b/drivers/media/video/saa7134/Kconfig
index 83f076abce35..7021bbf5897b 100644
--- a/drivers/media/video/saa7134/Kconfig
+++ b/drivers/media/video/saa7134/Kconfig
@@ -27,9 +27,7 @@ config VIDEO_SAA7134_ALSA
 config VIDEO_SAA7134_DVB
         tristate "DVB/ATSC Support for saa7134 based TV cards"
         depends on VIDEO_SAA7134 && DVB_CORE
-        depends on HOTPLUG      # due to FW_LOADER
         select VIDEOBUF_DVB
-        select FW_LOADER
         select DVB_PLL if !DVB_FE_CUSTOMISE
         select DVB_MT352 if !DVB_FE_CUSTOMISE
         select DVB_TDA1004X if !DVB_FE_CUSTOMISE
diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c
index 6893f998d292..98364d171def 100644
--- a/drivers/media/video/saa7134/saa7134-cards.c
+++ b/drivers/media/video/saa7134/saa7134-cards.c
@@ -5853,9 +5853,6 @@ int saa7134_board_init2(struct saa7134_dev *dev)
         unsigned char buf;
         int board;
 
-        dev->tuner_type = saa7134_boards[dev->board].tuner_type;
-        dev->tuner_addr = saa7134_boards[dev->board].tuner_addr;
-
         switch (dev->board) {
         case SAA7134_BOARD_BMK_MPEX_NOTUNER:
         case SAA7134_BOARD_BMK_MPEX_TUNER:
diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c
index cfee84ee7a88..75d618415f4f 100644
--- a/drivers/media/video/saa7134/saa7134-core.c
+++ b/drivers/media/video/saa7134/saa7134-core.c
@@ -798,7 +798,7 @@ static struct video_device *vdev_init(struct saa7134_dev *dev,
                 return NULL;
         *vfd = *template;
         vfd->minor   = -1;
-        vfd->dev     = &dev->pci->dev;
+        vfd->parent  = &dev->pci->dev;
         vfd->release = video_device_release;
         vfd->debug   = video_debug;
         snprintf(vfd->name, sizeof(vfd->name), "%s %s (%s)",
@@ -945,11 +945,12 @@ static int __devinit saa7134_initdev(struct pci_dev *pci_dev,
                 dev->board = SAA7134_BOARD_UNKNOWN;
         }
         dev->autodetected = card[dev->nr] != dev->board;
-        dev->tuner_type   = saa7134_boards[dev->board].tuner_type;
+        dev->tuner_type = saa7134_boards[dev->board].tuner_type;
+        dev->tuner_addr = saa7134_boards[dev->board].tuner_addr;
         dev->tda9887_conf = saa7134_boards[dev->board].tda9887_conf;
         if (UNSET != tuner[dev->nr])
                 dev->tuner_type = tuner[dev->nr];
-                printk(KERN_INFO "%s: subsystem: %04x:%04x, board: %s [card=%d,%s]\n",
+        printk(KERN_INFO "%s: subsystem: %04x:%04x, board: %s [card=%d,%s]\n",
                 dev->name,pci_dev->subsystem_vendor,
                 pci_dev->subsystem_device,saa7134_boards[dev->board].name,
                 dev->board, dev->autodetected ?
@@ -1007,11 +1008,9 @@ static int __devinit saa7134_initdev(struct pci_dev *pci_dev,
         v4l2_prio_init(&dev->prio);
 
         /* register v4l devices */
-        if (saa7134_no_overlay <= 0) {
-                saa7134_video_template.type |= VID_TYPE_OVERLAY;
-        } else {
-                printk("%s: Overlay support disabled.\n",dev->name);
-        }
+        if (saa7134_no_overlay > 0)
+                printk(KERN_INFO "%s: Overlay support disabled.\n", dev->name);
+
         dev->video_dev = vdev_init(dev,&saa7134_video_template,"video");
         err = video_register_device(dev->video_dev,VFL_TYPE_GRABBER,
                                     video_nr[dev->nr]);
@@ -1024,7 +1023,6 @@ static int __devinit saa7134_initdev(struct pci_dev *pci_dev,
                dev->name,dev->video_dev->minor & 0x1f);
 
         dev->vbi_dev = vdev_init(dev, &saa7134_video_template, "vbi");
-        dev->vbi_dev->type = VID_TYPE_TUNER | VID_TYPE_TELETEXT;
 
         err = video_register_device(dev->vbi_dev,VFL_TYPE_VBI,
                                     vbi_nr[dev->nr]);
diff --git a/drivers/media/video/saa7134/saa7134-empress.c b/drivers/media/video/saa7134/saa7134-empress.c
index 2a5ab957542d..c0c5d7509c25 100644
--- a/drivers/media/video/saa7134/saa7134-empress.c
+++ b/drivers/media/video/saa7134/saa7134-empress.c
@@ -89,14 +89,14 @@ static int ts_open(struct inode *inode, struct file *file)
         err = -EBUSY;
         if (!mutex_trylock(&dev->empress_tsq.vb_lock))
                 goto done;
-        if (dev->empress_users)
+        if (atomic_read(&dev->empress_users))
                 goto done_up;
 
         /* Unmute audio */
         saa_writeb(SAA7134_AUDIO_MUTE_CTRL,
                 saa_readb(SAA7134_AUDIO_MUTE_CTRL) & ~(1 << 6));
 
-        dev->empress_users++;
+        atomic_inc(&dev->empress_users);
         file->private_data = dev;
         err = 0;
 
@@ -110,8 +110,6 @@ static int ts_release(struct inode *inode, struct file *file)
 {
         struct saa7134_dev *dev = file->private_data;
 
-        mutex_lock(&dev->empress_tsq.vb_lock);
-
         videobuf_stop(&dev->empress_tsq);
         videobuf_mmap_free(&dev->empress_tsq);
 
@@ -122,9 +120,7 @@ static int ts_release(struct inode *inode, struct file *file)
         saa_writeb(SAA7134_AUDIO_MUTE_CTRL,
                 saa_readb(SAA7134_AUDIO_MUTE_CTRL) | (1 << 6));
 
-        dev->empress_users--;
-
-        mutex_unlock(&dev->empress_tsq.vb_lock);
+        atomic_dec(&dev->empress_users);
 
         return 0;
 }
@@ -333,6 +329,22 @@ static int empress_g_ext_ctrls(struct file *file, void *priv,
         return saa7134_i2c_call_saa6752(dev, VIDIOC_G_EXT_CTRLS, ctrls);
 }
 
+static int empress_g_ctrl(struct file *file, void *priv,
+                                        struct v4l2_control *c)
+{
+        struct saa7134_dev *dev = file->private_data;
+
+        return saa7134_g_ctrl_internal(dev, NULL, c);
+}
+
+static int empress_s_ctrl(struct file *file, void *priv,
+                                        struct v4l2_control *c)
+{
+        struct saa7134_dev *dev = file->private_data;
+
+        return saa7134_s_ctrl_internal(dev, NULL, c);
+}
+
 static int empress_queryctrl(struct file *file, void *priv,
                                         struct v4l2_queryctrl *c)
 {
@@ -400,16 +412,7 @@ static const struct file_operations ts_fops =
         .llseek   = no_llseek,
 };
 
-/* ----------------------------------------------------------- */
-
-static struct video_device saa7134_empress_template =
-{
-        .name          = "saa7134-empress",
-        .type          = 0 /* FIXME */,
-        .type2         = 0 /* FIXME */,
-        .fops          = &ts_fops,
-        .minor         = -1,
-
+static const struct v4l2_ioctl_ops ts_ioctl_ops = {
         .vidioc_querycap                = empress_querycap,
         .vidioc_enum_fmt_vid_cap        = empress_enum_fmt_vid_cap,
         .vidioc_s_fmt_vid_cap           = empress_s_fmt_vid_cap,
@@ -428,8 +431,17 @@ static struct video_device saa7134_empress_template =
 
         .vidioc_queryctrl               = empress_queryctrl,
         .vidioc_querymenu               = empress_querymenu,
-        .vidioc_g_ctrl                  = saa7134_g_ctrl,
-        .vidioc_s_ctrl                  = saa7134_s_ctrl,
+        .vidioc_g_ctrl                  = empress_g_ctrl,
+        .vidioc_s_ctrl                  = empress_s_ctrl,
+};
+
+/* ----------------------------------------------------------- */
+
+static struct video_device saa7134_empress_template = {
+        .name          = "saa7134-empress",
+        .fops          = &ts_fops,
+        .minor         = -1,
+        .ioctl_ops     = &ts_ioctl_ops,
 
         .tvnorms                        = SAA7134_NORMS,
         .current_norm                   = V4L2_STD_PAL,
@@ -445,7 +457,7 @@ static void empress_signal_update(struct work_struct *work)
                 ts_reset_encoder(dev);
         } else {
                 dprintk("video signal acquired\n");
-                if (dev->empress_users)
+                if (atomic_read(&dev->empress_users))
                         ts_init_encoder(dev);
         }
 }
@@ -465,7 +477,7 @@ static int empress_init(struct saa7134_dev *dev)
         if (NULL == dev->empress_dev)
                 return -ENOMEM;
         *(dev->empress_dev) = saa7134_empress_template;
-        dev->empress_dev->dev     = &dev->pci->dev;
+        dev->empress_dev->parent  = &dev->pci->dev;
         dev->empress_dev->release = video_device_release;
         snprintf(dev->empress_dev->name, sizeof(dev->empress_dev->name),
                  "%s empress (%s)", dev->name,
diff --git a/drivers/media/video/saa7134/saa7134-video.c b/drivers/media/video/saa7134/saa7134-video.c
index 1a5137550e7a..68c268981861 100644
--- a/drivers/media/video/saa7134/saa7134-video.c
+++ b/drivers/media/video/saa7134/saa7134-video.c
@@ -1112,10 +1112,8 @@ static struct videobuf_queue_ops video_qops = {
 
 /* ------------------------------------------------------------------ */
 
-int saa7134_g_ctrl(struct file *file, void *priv, struct v4l2_control *c)
+int saa7134_g_ctrl_internal(struct saa7134_dev *dev, struct saa7134_fh *fh, struct v4l2_control *c)
 {
-        struct saa7134_fh *fh = priv;
-        struct saa7134_dev *dev = fh->dev;
         const struct v4l2_queryctrl* ctrl;
 
         ctrl = ctrl_by_id(c->id);
@@ -1160,20 +1158,31 @@ int saa7134_g_ctrl(struct file *file, void *priv, struct v4l2_control *c)
         }
         return 0;
 }
-EXPORT_SYMBOL_GPL(saa7134_g_ctrl);
+EXPORT_SYMBOL_GPL(saa7134_g_ctrl_internal);
+
+static int saa7134_g_ctrl(struct file *file, void *priv, struct v4l2_control *c)
+{
+        struct saa7134_fh *fh = priv;
+
+        return saa7134_g_ctrl_internal(fh->dev, fh, c);
+}
 
-int saa7134_s_ctrl(struct file *file, void *f, struct v4l2_control *c)
+int saa7134_s_ctrl_internal(struct saa7134_dev *dev,  struct saa7134_fh *fh, struct v4l2_control *c)
 {
         const struct v4l2_queryctrl* ctrl;
-        struct saa7134_fh *fh = f;
-        struct saa7134_dev *dev = fh->dev;
         unsigned long flags;
         int restart_overlay = 0;
-        int err = -EINVAL;
+        int err;
 
-        err = v4l2_prio_check(&dev->prio, &fh->prio);
-        if (0 != err)
-                return err;
+        /* When called from the empress code fh == NULL.
+           That needs to be fixed somehow, but for now this is
+           good enough. */
+        if (fh) {
+                err = v4l2_prio_check(&dev->prio, &fh->prio);
+                if (0 != err)
+                        return err;
+        }
+        err = -EINVAL;
 
         mutex_lock(&dev->lock);
 
@@ -1274,7 +1283,14 @@ error:
         mutex_unlock(&dev->lock);
         return err;
 }
-EXPORT_SYMBOL_GPL(saa7134_s_ctrl);
+EXPORT_SYMBOL_GPL(saa7134_s_ctrl_internal);
+
+static int saa7134_s_ctrl(struct file *file, void *f, struct v4l2_control *c)
+{
+        struct saa7134_fh *fh = f;
+
+        return saa7134_s_ctrl_internal(fh->dev, fh, c);
+}
 
 /* ------------------------------------------------------------------ */
 
@@ -2353,26 +2369,7 @@ static const struct file_operations video_fops =
         .llseek   = no_llseek,
 };
 
-static const struct file_operations radio_fops =
-{
-        .owner    = THIS_MODULE,
-        .open     = video_open,
-        .release  = video_release,
-        .ioctl    = video_ioctl2,
-        .compat_ioctl   = v4l_compat_ioctl32,
-        .llseek   = no_llseek,
-};
-
-/* ----------------------------------------------------------- */
-/* exported stuff                                              */
-
-struct video_device saa7134_video_template =
-{
-        .name                           = "saa7134-video",
-        .type                           = VID_TYPE_CAPTURE|VID_TYPE_TUNER |
-                                        VID_TYPE_CLIPPING|VID_TYPE_SCALES,
-        .fops                           = &video_fops,
-        .minor                          = -1,
+static const struct v4l2_ioctl_ops video_ioctl_ops = {
         .vidioc_querycap                = saa7134_querycap,
         .vidioc_enum_fmt_vid_cap        = saa7134_enum_fmt_vid_cap,
         .vidioc_g_fmt_vid_cap           = saa7134_g_fmt_vid_cap,
@@ -2421,16 +2418,18 @@ struct video_device saa7134_video_template =
         .vidioc_g_register              = vidioc_g_register,
         .vidioc_s_register              = vidioc_s_register,
 #endif
-        .tvnorms                        = SAA7134_NORMS,
-        .current_norm                   = V4L2_STD_PAL,
 };
 
-struct video_device saa7134_radio_template =
-{
-        .name                   = "saa7134-radio",
-        .type                   = VID_TYPE_TUNER,
-        .fops                   = &radio_fops,
-        .minor                  = -1,
+static const struct file_operations radio_fops = {
+        .owner    = THIS_MODULE,
+        .open     = video_open,
+        .release  = video_release,
+        .ioctl    = video_ioctl2,
+        .compat_ioctl   = v4l_compat_ioctl32,
+        .llseek   = no_llseek,
+};
+
+static const struct v4l2_ioctl_ops radio_ioctl_ops = {
         .vidioc_querycap        = radio_querycap,
         .vidioc_g_tuner         = radio_g_tuner,
         .vidioc_enum_input      = radio_enum_input,
@@ -2447,6 +2446,25 @@ struct video_device saa7134_radio_template =
         .vidioc_s_frequency     = saa7134_s_frequency,
 };
 
+/* ----------------------------------------------------------- */
+/* exported stuff                                              */
+
+struct video_device saa7134_video_template = {
+        .name                           = "saa7134-video",
+        .fops                           = &video_fops,
+        .ioctl_ops                      = &video_ioctl_ops,
+        .minor                          = -1,
+        .tvnorms                        = SAA7134_NORMS,
+        .current_norm                   = V4L2_STD_PAL,
+};
+
+struct video_device saa7134_radio_template = {
+        .name                   = "saa7134-radio",
+        .fops                   = &radio_fops,
+        .ioctl_ops              = &radio_ioctl_ops,
+        .minor                  = -1,
+};
+
 int saa7134_video_init1(struct saa7134_dev *dev)
 {
         /* sanitycheck insmod options */
diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h
index 6927cbea8624..a0884f639f65 100644
--- a/drivers/media/video/saa7134/saa7134.h
+++ b/drivers/media/video/saa7134/saa7134.h
@@ -34,6 +34,7 @@
 #include <asm/io.h>
 
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <media/tuner.h>
 #include <media/ir-common.h>
 #include <media/ir-kbd-i2c.h>
@@ -560,7 +561,7 @@ struct saa7134_dev {
         /* SAA7134_MPEG_EMPRESS only */
         struct video_device        *empress_dev;
         struct videobuf_queue      empress_tsq;
-        unsigned int               empress_users;
+        atomic_t                   empress_users;
         struct work_struct         empress_workqueue;
         int                        empress_started;
 
@@ -662,8 +663,8 @@ extern unsigned int video_debug;
 extern struct video_device saa7134_video_template;
 extern struct video_device saa7134_radio_template;
 
-int saa7134_g_ctrl(struct file *file, void *priv, struct v4l2_control *c);
-int saa7134_s_ctrl(struct file *file, void *f, struct v4l2_control *c);
+int saa7134_s_ctrl_internal(struct saa7134_dev *dev,  struct saa7134_fh *fh, struct v4l2_control *c);
+int saa7134_g_ctrl_internal(struct saa7134_dev *dev,  struct saa7134_fh *fh, struct v4l2_control *c);
 int saa7134_queryctrl(struct file *file, void *priv, struct v4l2_queryctrl *c);
 
 int saa7134_videoport_init(struct saa7134_dev *dev);
diff --git a/drivers/media/video/saa717x.c b/drivers/media/video/saa717x.c
index 2220f9569941..af60ede5310d 100644
--- a/drivers/media/video/saa717x.c
+++ b/drivers/media/video/saa717x.c
@@ -35,7 +35,6 @@
 #include <linux/kernel.h>
 #include <linux/sched.h>
 
-#include <linux/videodev.h>
 #include <linux/videodev2.h>
 #include <linux/i2c.h>
 #include <media/v4l2-common.h>
diff --git a/drivers/media/video/saa7196.h b/drivers/media/video/saa7196.h
index cd4b6354a7b3..e69de29bb2d1 100644
--- a/drivers/media/video/saa7196.h
+++ b/drivers/media/video/saa7196.h
@@ -1,117 +0,0 @@
-/*
-    Definitions for the Philips SAA7196 digital video decoder,
-    scaler, and clock generator circuit (DESCpro), as used in
-    the PlanB video input of the Powermac 7x00/8x00 series.
-
-    Copyright (C) 1998 Michel Lanners (mlan@cpu.lu)
-
-    The register defines are shamelessly copied from the meteor
-    driver out of NetBSD (with permission),
-    and are copyrighted (c) 1995 Mark Tinguely and Jim Lowe
-    (Thanks !)
-
-    Additional debugging and coding by Takashi Oe (toe@unlinfo.unl.edu)
-
-    The default values used for PlanB are my mistakes.
-*/
-
-/* $Id: saa7196.h,v 1.5 1999/03/26 23:28:47 mlan Exp $ */
-
-#ifndef _SAA7196_H_
-#define _SAA7196_H_
-
-#define SAA7196_NUMREGS 0x31    /* Number of registers (used)*/
-#define NUM_SUPPORTED_NORM 3    /* Number of supported norms by PlanB */
-
-/* Decoder part: */
-#define SAA7196_IDEL    0x00    /* Increment delay */
-#define SAA7196_HSB5    0x01    /* H-sync begin; 50 hz */
-#define SAA7196_HSS5    0x02    /* H-sync stop; 50 hz */
-#define SAA7196_HCB5    0x03    /* H-clamp begin; 50 hz */
-#define SAA7196_HCS5    0x04    /* H-clamp stop; 50 hz */
-#define SAA7196_HSP5    0x05    /* H-sync after PHI1; 50 hz */
-#define SAA7196_LUMC    0x06    /* Luminance control */
-#define SAA7196_HUEC    0x07    /* Hue control */
-#define SAA7196_CKTQ    0x08    /* Colour Killer Threshold QAM (PAL, NTSC) */
-#define SAA7196_CKTS    0x09    /* Colour Killer Threshold SECAM */
-#define SAA7196_PALS    0x0a    /* PAL switch sensitivity */
-#define SAA7196_SECAMS  0x0b    /* SECAM switch sensitivity */
-#define SAA7196_CGAINC  0x0c    /* Chroma gain control */
-#define SAA7196_STDC    0x0d    /* Standard/Mode control */
-#define SAA7196_IOCC    0x0e    /* I/O and Clock Control */
-#define SAA7196_CTRL1   0x0f    /* Control #1 */
-#define SAA7196_CTRL2   0x10    /* Control #2 */
-#define SAA7196_CGAINR  0x11    /* Chroma Gain Reference */
-#define SAA7196_CSAT    0x12    /* Chroma Saturation */
-#define SAA7196_CONT    0x13    /* Luminance Contrast */
-#define SAA7196_HSB6    0x14    /* H-sync begin; 60 hz */
-#define SAA7196_HSS6    0x15    /* H-sync stop; 60 hz */
-#define SAA7196_HCB6    0x16    /* H-clamp begin; 60 hz */
-#define SAA7196_HCS6    0x17    /* H-clamp stop; 60 hz */
-#define SAA7196_HSP6    0x18    /* H-sync after PHI1; 60 hz */
-#define SAA7196_BRIG    0x19    /* Luminance Brightness */
-
-/* Scaler part: */
-#define SAA7196_FMTS    0x20    /* Formats and sequence */
-#define SAA7196_OUTPIX  0x21    /* Output data pixel/line */
-#define SAA7196_INPIX   0x22    /* Input data pixel/line */
-#define SAA7196_HWS     0x23    /* Horiz. window start */
-#define SAA7196_HFILT   0x24    /* Horiz. filter */
-#define SAA7196_OUTLINE 0x25    /* Output data lines/field */
-#define SAA7196_INLINE  0x26    /* Input data lines/field */
-#define SAA7196_VWS     0x27    /* Vertical window start */
-#define SAA7196_VYP     0x28    /* AFS/vertical Y processing */
-#define SAA7196_VBS     0x29    /* Vertical Bypass start */
-#define SAA7196_VBCNT   0x2a    /* Vertical Bypass count */
-#define SAA7196_VBP     0x2b    /* veritcal Bypass Polarity */
-#define SAA7196_VLOW    0x2c    /* Colour-keying lower V limit */
-#define SAA7196_VHIGH   0x2d    /* Colour-keying upper V limit */
-#define SAA7196_ULOW    0x2e    /* Colour-keying lower U limit */
-#define SAA7196_UHIGH   0x2f    /* Colour-keying upper U limit */
-#define SAA7196_DPATH   0x30    /* Data path setting  */
-
-/* Initialization default values: */
-
-unsigned char saa_regs[NUM_SUPPORTED_NORM][SAA7196_NUMREGS] = {
-
-/* PAL, 768x576 (no scaling), composite video-in */
-/* Decoder: */
-      { 0x50, 0x30, 0x00, 0xe8, 0xb6, 0xe5, 0x63, 0xff,
-        0xfe, 0xf0, 0xfe, 0xe0, 0x20, 0x06, 0x3b, 0x98,
-        0x00, 0x59, 0x41, 0x45, 0x34, 0x0a, 0xf4, 0xd2,
-        0xe9, 0xa2,
-/* Padding */
-                    0x80, 0x80, 0x80, 0x80, 0x80, 0x80,
-/* Scaler: */
-        0x72, 0x80, 0x00, 0x03, 0x8d, 0x20, 0x20, 0x12,
-        0xa5, 0x12, 0x00, 0x00, 0x04, 0x00, 0x04, 0x00,
-        0x87 },
-
-/* NTSC, 640x480? (no scaling), composite video-in */
-/* Decoder: */
-      { 0x50, 0x30, 0x00, 0xe8, 0xb6, 0xe5, 0x50, 0x00,
-        0xf8, 0xf0, 0xfe, 0xe0, 0x00, 0x06, 0x3b, 0x98,
-        0x00, 0x2c, 0x3d, 0x40, 0x34, 0x0a, 0xf4, 0xd2,
-        0xe9, 0x98,
-/* Padding */
-                    0x80, 0x80, 0x80, 0x80, 0x80, 0x80,
-/* Scaler: */
-        0x72, 0x80, 0x80, 0x03, 0x89, 0xf0, 0xf0, 0x0d,
-        0xa0, 0x0d, 0x00, 0x00, 0x04, 0x00, 0x04, 0x00,
-        0x87 },
-
-/* SECAM, 768x576 (no scaling), composite video-in */
-/* Decoder: */
-      { 0x50, 0x30, 0x00, 0xe8, 0xb6, 0xe5, 0x63, 0xff,
-        0xfe, 0xf0, 0xfe, 0xe0, 0x20, 0x07, 0x3b, 0x98,
-        0x00, 0x59, 0x41, 0x45, 0x34, 0x0a, 0xf4, 0xd2,
-        0xe9, 0xa2,
-/* Padding */
-                    0x80, 0x80, 0x80, 0x80, 0x80, 0x80,
-/* Scaler: */
-        0x72, 0x80, 0x00, 0x03, 0x8d, 0x20, 0x20, 0x12,
-        0xa5, 0x12, 0x00, 0x00, 0x04, 0x00, 0x04, 0x00,
-        0x87 }
-        };
-
-#endif /* _SAA7196_H_ */
diff --git a/drivers/media/video/se401.c b/drivers/media/video/se401.c
index 1cd629380f71..f481277892da 100644
--- a/drivers/media/video/se401.c
+++ b/drivers/media/video/se401.c
@@ -1230,9 +1230,7 @@ static const struct file_operations se401_fops = {
         .llseek =       no_llseek,
 };
 static struct video_device se401_template = {
-        .owner =        THIS_MODULE,
         .name =         "se401 USB camera",
-        .type =         VID_TYPE_CAPTURE,
         .fops =         &se401_fops,
 };
 
diff --git a/drivers/media/video/se401.h b/drivers/media/video/se401.h
index 835ef872e803..2ce685db5d8b 100644
--- a/drivers/media/video/se401.h
+++ b/drivers/media/video/se401.h
@@ -5,6 +5,7 @@
 #include <asm/uaccess.h>
 #include <linux/videodev.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <linux/mutex.h>
 
 #define se401_DEBUG     /* Turn on debug messages */
diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c
index 012005e1a77b..f7ca3cb9340a 100644
--- a/drivers/media/video/sh_mobile_ceu_camera.c
+++ b/drivers/media/video/sh_mobile_ceu_camera.c
@@ -91,6 +91,7 @@ struct sh_mobile_ceu_dev {
         void __iomem *base;
         unsigned long video_limit;
 
+        /* lock used to protect videobuf */
         spinlock_t lock;
         struct list_head capture;
         struct videobuf_buffer *active;
diff --git a/drivers/media/video/sn9c102/sn9c102.h b/drivers/media/video/sn9c102/sn9c102.h
index 0c8d87d8d18d..cbfc44433b99 100644
--- a/drivers/media/video/sn9c102/sn9c102.h
+++ b/drivers/media/video/sn9c102/sn9c102.h
@@ -25,6 +25,7 @@
 #include <linux/usb.h>
 #include <linux/videodev2.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <linux/device.h>
 #include <linux/list.h>
 #include <linux/spinlock.h>
diff --git a/drivers/media/video/sn9c102/sn9c102_core.c b/drivers/media/video/sn9c102/sn9c102_core.c
index 7f9c7bcf3c85..23408764d0ef 100644
--- a/drivers/media/video/sn9c102/sn9c102_core.c
+++ b/drivers/media/video/sn9c102/sn9c102_core.c
@@ -1038,8 +1038,7 @@ static ssize_t sn9c102_show_reg(struct device* cd,
         if (mutex_lock_interruptible(&sn9c102_sysfs_lock))
                 return -ERESTARTSYS;
 
-        cam = video_get_drvdata(container_of(cd, struct video_device,
-                                             class_dev));
+        cam = video_get_drvdata(container_of(cd, struct video_device, dev));
         if (!cam) {
                 mutex_unlock(&sn9c102_sysfs_lock);
                 return -ENODEV;
@@ -1064,8 +1063,7 @@ sn9c102_store_reg(struct device* cd, struct device_attribute *attr,
         if (mutex_lock_interruptible(&sn9c102_sysfs_lock))
                 return -ERESTARTSYS;
 
-        cam = video_get_drvdata(container_of(cd, struct video_device,
-                                             class_dev));
+        cam = video_get_drvdata(container_of(cd, struct video_device, dev));
         if (!cam) {
                 mutex_unlock(&sn9c102_sysfs_lock);
                 return -ENODEV;
@@ -1098,8 +1096,7 @@ static ssize_t sn9c102_show_val(struct device* cd,
         if (mutex_lock_interruptible(&sn9c102_sysfs_lock))
                 return -ERESTARTSYS;
 
-        cam = video_get_drvdata(container_of(cd, struct video_device,
-                                             class_dev));
+        cam = video_get_drvdata(container_of(cd, struct video_device, dev));
         if (!cam) {
                 mutex_unlock(&sn9c102_sysfs_lock);
                 return -ENODEV;
@@ -1132,8 +1129,7 @@ sn9c102_store_val(struct device* cd, struct device_attribute *attr,
         if (mutex_lock_interruptible(&sn9c102_sysfs_lock))
                 return -ERESTARTSYS;
 
-        cam = video_get_drvdata(container_of(cd, struct video_device,
-                                             class_dev));
+        cam = video_get_drvdata(container_of(cd, struct video_device, dev));
         if (!cam) {
                 mutex_unlock(&sn9c102_sysfs_lock);
                 return -ENODEV;
@@ -1170,8 +1166,7 @@ static ssize_t sn9c102_show_i2c_reg(struct device* cd,
         if (mutex_lock_interruptible(&sn9c102_sysfs_lock))
                 return -ERESTARTSYS;
 
-        cam = video_get_drvdata(container_of(cd, struct video_device,
-                                             class_dev));
+        cam = video_get_drvdata(container_of(cd, struct video_device, dev));
         if (!cam) {
                 mutex_unlock(&sn9c102_sysfs_lock);
                 return -ENODEV;
@@ -1198,8 +1193,7 @@ sn9c102_store_i2c_reg(struct device* cd, struct device_attribute *attr,
         if (mutex_lock_interruptible(&sn9c102_sysfs_lock))
                 return -ERESTARTSYS;
 
-        cam = video_get_drvdata(container_of(cd, struct video_device,
-                                             class_dev));
+        cam = video_get_drvdata(container_of(cd, struct video_device, dev));
         if (!cam) {
                 mutex_unlock(&sn9c102_sysfs_lock);
                 return -ENODEV;
@@ -1232,8 +1226,7 @@ static ssize_t sn9c102_show_i2c_val(struct device* cd,
         if (mutex_lock_interruptible(&sn9c102_sysfs_lock))
                 return -ERESTARTSYS;
 
-        cam = video_get_drvdata(container_of(cd, struct video_device,
-                                             class_dev));
+        cam = video_get_drvdata(container_of(cd, struct video_device, dev));
         if (!cam) {
                 mutex_unlock(&sn9c102_sysfs_lock);
                 return -ENODEV;
@@ -1271,8 +1264,7 @@ sn9c102_store_i2c_val(struct device* cd, struct device_attribute *attr,
         if (mutex_lock_interruptible(&sn9c102_sysfs_lock))
                 return -ERESTARTSYS;
 
-        cam = video_get_drvdata(container_of(cd, struct video_device,
-                                             class_dev));
+        cam = video_get_drvdata(container_of(cd, struct video_device, dev));
         if (!cam) {
                 mutex_unlock(&sn9c102_sysfs_lock);
                 return -ENODEV;
@@ -1318,8 +1310,7 @@ sn9c102_store_green(struct device* cd, struct device_attribute *attr,
         if (mutex_lock_interruptible(&sn9c102_sysfs_lock))
                 return -ERESTARTSYS;
 
-        cam = video_get_drvdata(container_of(cd, struct video_device,
-                                             class_dev));
+        cam = video_get_drvdata(container_of(cd, struct video_device, dev));
         if (!cam) {
                 mutex_unlock(&sn9c102_sysfs_lock);
                 return -ENODEV;
@@ -1400,8 +1391,7 @@ static ssize_t sn9c102_show_frame_header(struct device* cd,
         struct sn9c102_device* cam;
         ssize_t count;
 
-        cam = video_get_drvdata(container_of(cd, struct video_device,
-                                             class_dev));
+        cam = video_get_drvdata(container_of(cd, struct video_device, dev));
         if (!cam)
                 return -ENODEV;
 
@@ -1428,49 +1418,49 @@ static DEVICE_ATTR(frame_header, S_IRUGO, sn9c102_show_frame_header, NULL);
 
 static int sn9c102_create_sysfs(struct sn9c102_device* cam)
 {
-        struct device *classdev = &(cam->v4ldev->class_dev);
+        struct device *dev = &(cam->v4ldev->dev);
         int err = 0;
 
-        if ((err = device_create_file(classdev, &dev_attr_reg)))
+        if ((err = device_create_file(dev, &dev_attr_reg)))
                 goto err_out;
-        if ((err = device_create_file(classdev, &dev_attr_val)))
+        if ((err = device_create_file(dev, &dev_attr_val)))
                 goto err_reg;
-        if ((err = device_create_file(classdev, &dev_attr_frame_header)))
+        if ((err = device_create_file(dev, &dev_attr_frame_header)))
                 goto err_val;
 
         if (cam->sensor.sysfs_ops) {
-                if ((err = device_create_file(classdev, &dev_attr_i2c_reg)))
+                if ((err = device_create_file(dev, &dev_attr_i2c_reg)))
                         goto err_frame_header;
-                if ((err = device_create_file(classdev, &dev_attr_i2c_val)))
+                if ((err = device_create_file(dev, &dev_attr_i2c_val)))
                         goto err_i2c_reg;
         }
 
         if (cam->bridge == BRIDGE_SN9C101 || cam->bridge == BRIDGE_SN9C102) {
-                if ((err = device_create_file(classdev, &dev_attr_green)))
+                if ((err = device_create_file(dev, &dev_attr_green)))
                         goto err_i2c_val;
         } else {
-                if ((err = device_create_file(classdev, &dev_attr_blue)))
+                if ((err = device_create_file(dev, &dev_attr_blue)))
                         goto err_i2c_val;
-                if ((err = device_create_file(classdev, &dev_attr_red)))
+                if ((err = device_create_file(dev, &dev_attr_red)))
                         goto err_blue;
         }
 
         return 0;
 
 err_blue:
-        device_remove_file(classdev, &dev_attr_blue);
+        device_remove_file(dev, &dev_attr_blue);
 err_i2c_val:
         if (cam->sensor.sysfs_ops)
-                device_remove_file(classdev, &dev_attr_i2c_val);
+                device_remove_file(dev, &dev_attr_i2c_val);
 err_i2c_reg:
         if (cam->sensor.sysfs_ops)
-                device_remove_file(classdev, &dev_attr_i2c_reg);
+                device_remove_file(dev, &dev_attr_i2c_reg);
 err_frame_header:
-        device_remove_file(classdev, &dev_attr_frame_header);
+        device_remove_file(dev, &dev_attr_frame_header);
 err_val:
-        device_remove_file(classdev, &dev_attr_val);
+        device_remove_file(dev, &dev_attr_val);
 err_reg:
-        device_remove_file(classdev, &dev_attr_reg);
+        device_remove_file(dev, &dev_attr_reg);
 err_out:
         return err;
 }
@@ -3319,8 +3309,6 @@ sn9c102_usb_probe(struct usb_interface* intf, const struct usb_device_id* id)
         }
 
         strcpy(cam->v4ldev->name, "SN9C1xx PC Camera");
-        cam->v4ldev->owner = THIS_MODULE;
-        cam->v4ldev->type = VID_TYPE_CAPTURE | VID_TYPE_SCALES;
         cam->v4ldev->fops = &sn9c102_fops;
         cam->v4ldev->minor = video_nr[dev_nr];
         cam->v4ldev->release = video_device_release;
diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c
index e39b98f1eca4..b6be5ee678b6 100644
--- a/drivers/media/video/soc_camera.c
+++ b/drivers/media/video/soc_camera.c
@@ -25,6 +25,7 @@
 #include <linux/vmalloc.h>
 
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <media/v4l2-dev.h>
 #include <media/videobuf-core.h>
 #include <media/soc_camera.h>
@@ -193,7 +194,7 @@ static int soc_camera_open(struct inode *inode, struct file *file)
         mutex_lock(&video_lock);
 
         vdev = video_devdata(file);
-        icd = container_of(vdev->dev, struct soc_camera_device, dev);
+        icd = container_of(vdev->parent, struct soc_camera_device, dev);
         ici = to_soc_camera_host(icd->dev.parent);
 
         if (!try_module_get(icd->ops->owner)) {
@@ -258,7 +259,7 @@ static int soc_camera_close(struct inode *inode, struct file *file)
 
         vfree(icf);
 
-        dev_dbg(vdev->dev, "camera device close\n");
+        dev_dbg(vdev->parent, "camera device close\n");
 
         return 0;
 }
@@ -271,7 +272,7 @@ static ssize_t soc_camera_read(struct file *file, char __user *buf,
         struct video_device *vdev = icd->vdev;
         int err = -EINVAL;
 
-        dev_err(vdev->dev, "camera device read not implemented\n");
+        dev_err(vdev->parent, "camera device read not implemented\n");
 
         return err;
 }
@@ -861,6 +862,35 @@ void soc_camera_device_unregister(struct soc_camera_device *icd)
 }
 EXPORT_SYMBOL(soc_camera_device_unregister);
 
+static const struct v4l2_ioctl_ops soc_camera_ioctl_ops = {
+        .vidioc_querycap         = soc_camera_querycap,
+        .vidioc_g_fmt_vid_cap    = soc_camera_g_fmt_vid_cap,
+        .vidioc_enum_fmt_vid_cap = soc_camera_enum_fmt_vid_cap,
+        .vidioc_s_fmt_vid_cap    = soc_camera_s_fmt_vid_cap,
+        .vidioc_enum_input       = soc_camera_enum_input,
+        .vidioc_g_input          = soc_camera_g_input,
+        .vidioc_s_input          = soc_camera_s_input,
+        .vidioc_s_std            = soc_camera_s_std,
+        .vidioc_reqbufs          = soc_camera_reqbufs,
+        .vidioc_try_fmt_vid_cap  = soc_camera_try_fmt_vid_cap,
+        .vidioc_querybuf         = soc_camera_querybuf,
+        .vidioc_qbuf             = soc_camera_qbuf,
+        .vidioc_dqbuf            = soc_camera_dqbuf,
+        .vidioc_streamon         = soc_camera_streamon,
+        .vidioc_streamoff        = soc_camera_streamoff,
+        .vidioc_queryctrl        = soc_camera_queryctrl,
+        .vidioc_g_ctrl           = soc_camera_g_ctrl,
+        .vidioc_s_ctrl           = soc_camera_s_ctrl,
+        .vidioc_cropcap          = soc_camera_cropcap,
+        .vidioc_g_crop           = soc_camera_g_crop,
+        .vidioc_s_crop           = soc_camera_s_crop,
+        .vidioc_g_chip_ident     = soc_camera_g_chip_ident,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+        .vidioc_g_register       = soc_camera_g_register,
+        .vidioc_s_register       = soc_camera_s_register,
+#endif
+};
+
 int soc_camera_video_start(struct soc_camera_device *icd)
 {
         struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
@@ -877,45 +907,19 @@ int soc_camera_video_start(struct soc_camera_device *icd)
 
         strlcpy(vdev->name, ici->drv_name, sizeof(vdev->name));
         /* Maybe better &ici->dev */
-        vdev->dev               = &icd->dev;
-        vdev->type              = VID_TYPE_CAPTURE;
+        vdev->parent            = &icd->dev;
         vdev->current_norm      = V4L2_STD_UNKNOWN;
         vdev->fops              = &soc_camera_fops;
+        vdev->ioctl_ops         = &soc_camera_ioctl_ops;
         vdev->release           = video_device_release;
         vdev->minor             = -1;
         vdev->tvnorms           = V4L2_STD_UNKNOWN,
-        vdev->vidioc_querycap   = soc_camera_querycap;
-        vdev->vidioc_g_fmt_vid_cap = soc_camera_g_fmt_vid_cap;
-        vdev->vidioc_enum_fmt_vid_cap = soc_camera_enum_fmt_vid_cap;
-        vdev->vidioc_s_fmt_vid_cap = soc_camera_s_fmt_vid_cap;
-        vdev->vidioc_enum_input = soc_camera_enum_input;
-        vdev->vidioc_g_input    = soc_camera_g_input;
-        vdev->vidioc_s_input    = soc_camera_s_input;
-        vdev->vidioc_s_std      = soc_camera_s_std;
-        vdev->vidioc_reqbufs    = soc_camera_reqbufs;
-        vdev->vidioc_try_fmt_vid_cap = soc_camera_try_fmt_vid_cap;
-        vdev->vidioc_querybuf   = soc_camera_querybuf;
-        vdev->vidioc_qbuf       = soc_camera_qbuf;
-        vdev->vidioc_dqbuf      = soc_camera_dqbuf;
-        vdev->vidioc_streamon   = soc_camera_streamon;
-        vdev->vidioc_streamoff  = soc_camera_streamoff;
-        vdev->vidioc_queryctrl  = soc_camera_queryctrl;
-        vdev->vidioc_g_ctrl     = soc_camera_g_ctrl;
-        vdev->vidioc_s_ctrl     = soc_camera_s_ctrl;
-        vdev->vidioc_cropcap    = soc_camera_cropcap;
-        vdev->vidioc_g_crop     = soc_camera_g_crop;
-        vdev->vidioc_s_crop     = soc_camera_s_crop;
-        vdev->vidioc_g_chip_ident = soc_camera_g_chip_ident;
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-        vdev->vidioc_g_register = soc_camera_g_register;
-        vdev->vidioc_s_register = soc_camera_s_register;
-#endif
 
         icd->current_fmt = &icd->formats[0];
 
         err = video_register_device(vdev, VFL_TYPE_GRABBER, vdev->minor);
         if (err < 0) {
-                dev_err(vdev->dev, "video_register_device failed\n");
+                dev_err(vdev->parent, "video_register_device failed\n");
                 goto evidregd;
         }
         icd->vdev = vdev;
diff --git a/drivers/media/video/stk-webcam.c b/drivers/media/video/stk-webcam.c
index f308c38d744f..ad36af30e099 100644
--- a/drivers/media/video/stk-webcam.c
+++ b/drivers/media/video/stk-webcam.c
@@ -34,6 +34,7 @@
 #include <linux/vmalloc.h>
 #include <linux/videodev2.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 
 #include "stk-webcam.h"
 
@@ -340,17 +341,19 @@ static int stk_create_sysfs_files(struct video_device *vdev)
 {
         int ret;
 
-        ret = video_device_create_file(vdev, &dev_attr_brightness);
-        ret += video_device_create_file(vdev, &dev_attr_hflip);
-        ret += video_device_create_file(vdev, &dev_attr_vflip);
+        ret = device_create_file(&vdev->dev, &dev_attr_brightness);
+        ret += device_create_file(&vdev->dev, &dev_attr_hflip);
+        ret += device_create_file(&vdev->dev, &dev_attr_vflip);
+        if (ret)
+                STK_WARNING("Could not create sysfs files\n");
         return ret;
 }
 
 static void stk_remove_sysfs_files(struct video_device *vdev)
 {
-        video_device_remove_file(vdev, &dev_attr_brightness);
-        video_device_remove_file(vdev, &dev_attr_hflip);
-        video_device_remove_file(vdev, &dev_attr_vflip);
+        device_remove_file(&vdev->dev, &dev_attr_brightness);
+        device_remove_file(&vdev->dev, &dev_attr_hflip);
+        device_remove_file(&vdev->dev, &dev_attr_vflip);
 }
 
 #else
@@ -442,18 +445,19 @@ static void stk_isoc_handler(struct urb *urb)
                                 fb->v4lbuf.bytesused = 0;
                                 fill = fb->buffer;
                         } else if (fb->v4lbuf.bytesused == dev->frame_size) {
-                                list_move_tail(dev->sio_avail.next,
-                                        &dev->sio_full);
-                                wake_up(&dev->wait_frame);
-                                if (list_empty(&dev->sio_avail)) {
-                                        (void) (printk_ratelimit() &&
-                                        STK_ERROR("No buffer available\n"));
-                                        goto resubmit;
+                                if (list_is_singular(&dev->sio_avail)) {
+                                        /* Always reuse the last buffer */
+                                        fb->v4lbuf.bytesused = 0;
+                                        fill = fb->buffer;
+                                } else {
+                                        list_move_tail(dev->sio_avail.next,
+                                                &dev->sio_full);
+                                        wake_up(&dev->wait_frame);
+                                        fb = list_first_entry(&dev->sio_avail,
+                                                struct stk_sio_buffer, list);
+                                        fb->v4lbuf.bytesused = 0;
+                                        fill = fb->buffer;
                                 }
-                                fb = list_first_entry(&dev->sio_avail,
-                                        struct stk_sio_buffer, list);
-                                fb->v4lbuf.bytesused = 0;
-                                fill = fb->buffer;
                         }
                 } else {
                         framelen -= 4;
@@ -1327,20 +1331,7 @@ static struct file_operations v4l_stk_fops = {
         .llseek = no_llseek
 };
 
-static void stk_v4l_dev_release(struct video_device *vd)
-{
-}
-
-static struct video_device stk_v4l_data = {
-        .name = "stkwebcam",
-        .type = VFL_TYPE_GRABBER,
-        .type2 = VID_TYPE_CAPTURE,
-        .minor = -1,
-        .tvnorms = V4L2_STD_UNKNOWN,
-        .current_norm = V4L2_STD_UNKNOWN,
-        .fops = &v4l_stk_fops,
-        .release = stk_v4l_dev_release,
-
+static const struct v4l2_ioctl_ops v4l_stk_ioctl_ops = {
         .vidioc_querycap = stk_vidioc_querycap,
         .vidioc_enum_fmt_vid_cap = stk_vidioc_enum_fmt_vid_cap,
         .vidioc_try_fmt_vid_cap = stk_vidioc_try_fmt_vid_cap,
@@ -1362,6 +1353,20 @@ static struct video_device stk_v4l_data = {
         .vidioc_g_parm = stk_vidioc_g_parm,
 };
 
+static void stk_v4l_dev_release(struct video_device *vd)
+{
+}
+
+static struct video_device stk_v4l_data = {
+        .name = "stkwebcam",
+        .minor = -1,
+        .tvnorms = V4L2_STD_UNKNOWN,
+        .current_norm = V4L2_STD_UNKNOWN,
+        .fops = &v4l_stk_fops,
+        .ioctl_ops = &v4l_stk_ioctl_ops,
+        .release = stk_v4l_dev_release,
+};
+
 
 static int stk_register_video_device(struct stk_camera *dev)
 {
@@ -1369,7 +1374,7 @@ static int stk_register_video_device(struct stk_camera *dev)
 
         dev->vdev = stk_v4l_data;
         dev->vdev.debug = debug;
-        dev->vdev.dev = &dev->interface->dev;
+        dev->vdev.parent = &dev->interface->dev;
         dev->vdev.priv = dev;
         err = video_register_device(&dev->vdev, VFL_TYPE_GRABBER, -1);
         if (err)
diff --git a/drivers/media/video/stradis.c b/drivers/media/video/stradis.c
index c109511f21ea..276bded06ab3 100644
--- a/drivers/media/video/stradis.c
+++ b/drivers/media/video/stradis.c
@@ -43,6 +43,7 @@
 #include <linux/vmalloc.h>
 #include <linux/videodev.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 
 #include "saa7146.h"
 #include "saa7146reg.h"
@@ -1918,7 +1919,6 @@ static const struct file_operations saa_fops = {
 /* template for video_device-structure */
 static struct video_device saa_template = {
         .name = "SAA7146A",
-        .type = VID_TYPE_CAPTURE | VID_TYPE_OVERLAY,
         .fops = &saa_fops,
         .minor = -1,
 };
diff --git a/drivers/media/video/stv680.c b/drivers/media/video/stv680.c
index d7f130bedb5f..56dc3d6b5b29 100644
--- a/drivers/media/video/stv680.c
+++ b/drivers/media/video/stv680.c
@@ -66,6 +66,7 @@
 #include <linux/errno.h>
 #include <linux/videodev.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <linux/usb.h>
 #include <linux/mutex.h>
 
@@ -524,53 +525,54 @@ static int stv680_create_sysfs_files(struct video_device *vdev)
 {
         int rc;
 
-        rc = video_device_create_file(vdev, &dev_attr_model);
+        rc = device_create_file(&vdev->dev, &dev_attr_model);
         if (rc) goto err;
-        rc = video_device_create_file(vdev, &dev_attr_in_use);
+        rc = device_create_file(&vdev->dev, &dev_attr_in_use);
         if (rc) goto err_model;
-        rc = video_device_create_file(vdev, &dev_attr_streaming);
+        rc = device_create_file(&vdev->dev, &dev_attr_streaming);
         if (rc) goto err_inuse;
-        rc = video_device_create_file(vdev, &dev_attr_palette);
+        rc = device_create_file(&vdev->dev, &dev_attr_palette);
         if (rc) goto err_stream;
-        rc = video_device_create_file(vdev, &dev_attr_frames_total);
+        rc = device_create_file(&vdev->dev, &dev_attr_frames_total);
         if (rc) goto err_pal;
-        rc = video_device_create_file(vdev, &dev_attr_frames_read);
+        rc = device_create_file(&vdev->dev, &dev_attr_frames_read);
         if (rc) goto err_framtot;
-        rc = video_device_create_file(vdev, &dev_attr_packets_dropped);
+        rc = device_create_file(&vdev->dev, &dev_attr_packets_dropped);
         if (rc) goto err_framread;
-        rc = video_device_create_file(vdev, &dev_attr_decoding_errors);
+        rc = device_create_file(&vdev->dev, &dev_attr_decoding_errors);
         if (rc) goto err_dropped;
 
         return 0;
 
 err_dropped:
-        video_device_remove_file(vdev, &dev_attr_packets_dropped);
+        device_remove_file(&vdev->dev, &dev_attr_packets_dropped);
 err_framread:
-        video_device_remove_file(vdev, &dev_attr_frames_read);
+        device_remove_file(&vdev->dev, &dev_attr_frames_read);
 err_framtot:
-        video_device_remove_file(vdev, &dev_attr_frames_total);
+        device_remove_file(&vdev->dev, &dev_attr_frames_total);
 err_pal:
-        video_device_remove_file(vdev, &dev_attr_palette);
+        device_remove_file(&vdev->dev, &dev_attr_palette);
 err_stream:
-        video_device_remove_file(vdev, &dev_attr_streaming);
+        device_remove_file(&vdev->dev, &dev_attr_streaming);
 err_inuse:
-        video_device_remove_file(vdev, &dev_attr_in_use);
+        device_remove_file(&vdev->dev, &dev_attr_in_use);
 err_model:
-        video_device_remove_file(vdev, &dev_attr_model);
+        device_remove_file(&vdev->dev, &dev_attr_model);
 err:
+        PDEBUG(0, "STV(e): Could not create sysfs files");
         return rc;
 }
 
 static void stv680_remove_sysfs_files(struct video_device *vdev)
 {
-        video_device_remove_file(vdev, &dev_attr_model);
-        video_device_remove_file(vdev, &dev_attr_in_use);
-        video_device_remove_file(vdev, &dev_attr_streaming);
-        video_device_remove_file(vdev, &dev_attr_palette);
-        video_device_remove_file(vdev, &dev_attr_frames_total);
-        video_device_remove_file(vdev, &dev_attr_frames_read);
-        video_device_remove_file(vdev, &dev_attr_packets_dropped);
-        video_device_remove_file(vdev, &dev_attr_decoding_errors);
+        device_remove_file(&vdev->dev, &dev_attr_model);
+        device_remove_file(&vdev->dev, &dev_attr_in_use);
+        device_remove_file(&vdev->dev, &dev_attr_streaming);
+        device_remove_file(&vdev->dev, &dev_attr_palette);
+        device_remove_file(&vdev->dev, &dev_attr_frames_total);
+        device_remove_file(&vdev->dev, &dev_attr_frames_read);
+        device_remove_file(&vdev->dev, &dev_attr_packets_dropped);
+        device_remove_file(&vdev->dev, &dev_attr_decoding_errors);
 }
 
 /********************************************************************
@@ -1400,9 +1402,7 @@ static const struct file_operations stv680_fops = {
         .llseek =       no_llseek,
 };
 static struct video_device stv680_template = {
-        .owner =        THIS_MODULE,
         .name =         "STV0680 USB camera",
-        .type =         VID_TYPE_CAPTURE,
         .fops =         &stv680_fops,
         .release =      video_device_release,
         .minor =        -1,
@@ -1454,7 +1454,7 @@ static int stv680_probe (struct usb_interface *intf, const struct usb_device_id
                 goto error;
         }
         memcpy(stv680->vdev, &stv680_template, sizeof(stv680_template));
-        stv680->vdev->dev = &intf->dev;
+        stv680->vdev->parent = &intf->dev;
         video_set_drvdata(stv680->vdev, stv680);
 
         memcpy (stv680->vdev->name, stv680->camera_name, strlen (stv680->camera_name));
diff --git a/drivers/media/video/tda7432.c b/drivers/media/video/tda7432.c
index ae75c187da79..4963d4264880 100644
--- a/drivers/media/video/tda7432.c
+++ b/drivers/media/video/tda7432.c
@@ -44,10 +44,11 @@
 #include <linux/delay.h>
 #include <linux/errno.h>
 #include <linux/slab.h>
-#include <linux/videodev.h>
+#include <linux/videodev2.h>
 #include <linux/i2c.h>
 
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <media/i2c-addr.h>
 
 #ifndef VIDEO_AUDIO_BALANCE
diff --git a/drivers/media/video/tda9875.c b/drivers/media/video/tda9875.c
index 7a8ce8fb46dc..792f0b079909 100644
--- a/drivers/media/video/tda9875.c
+++ b/drivers/media/video/tda9875.c
@@ -25,7 +25,7 @@
 #include <linux/delay.h>
 #include <linux/errno.h>
 #include <linux/slab.h>
-#include <linux/videodev.h>
+#include <linux/videodev2.h>
 #include <media/v4l2-common.h>
 #include <linux/i2c.h>
 #include <linux/init.h>
diff --git a/drivers/media/video/tlv320aic23b.c b/drivers/media/video/tlv320aic23b.c
index 9220378a5637..281065b9dd2d 100644
--- a/drivers/media/video/tlv320aic23b.c
+++ b/drivers/media/video/tlv320aic23b.c
@@ -29,7 +29,7 @@
 #include <asm/uaccess.h>
 #include <linux/i2c.h>
 #include <linux/i2c-id.h>
-#include <linux/videodev.h>
+#include <linux/videodev2.h>
 #include <media/v4l2-common.h>
 #include <media/v4l2-i2c-drv-legacy.h>
 
diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c
index 93d879dc510f..d806a3556eed 100644
--- a/drivers/media/video/tuner-core.c
+++ b/drivers/media/video/tuner-core.c
@@ -19,6 +19,7 @@
 #include <media/tuner.h>
 #include <media/tuner-types.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <media/v4l2-i2c-drv-legacy.h>
 #include "mt20xx.h"
 #include "tda8290.h"
diff --git a/drivers/media/video/tveeprom.c b/drivers/media/video/tveeprom.c
index 9da0e1807ffb..bcc32fa92a81 100644
--- a/drivers/media/video/tveeprom.c
+++ b/drivers/media/video/tveeprom.c
@@ -34,13 +34,13 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/types.h>
-#include <linux/videodev.h>
+#include <linux/videodev2.h>
 #include <linux/i2c.h>
 
 #include <media/tuner.h>
 #include <media/tveeprom.h>
 #include <media/v4l2-common.h>
-#include <media/audiochip.h>
+#include <media/v4l2-chip-ident.h>
 
 MODULE_DESCRIPTION("i2c Hauppauge eeprom decoder driver");
 MODULE_AUTHOR("John Klar");
@@ -261,70 +261,72 @@ hauppauge_tuner[] =
         { TUNER_ABSENT,                 "MaxLinear MXL5005_v2"},
         { TUNER_PHILIPS_TDA8290,        "Philips 18271_8295"},
         /* 150-159 */
-        { TUNER_ABSENT,        "Xceive XC5000"},
+        { TUNER_ABSENT,                 "Xceive XC5000"},
 };
 
+/* Use V4L2_IDENT_AMBIGUOUS for those audio 'chips' that are
+ * internal to a video chip, i.e. not a separate audio chip. */
 static struct HAUPPAUGE_AUDIOIC
 {
-        enum audiochip  id;
+        u32   id;
         char *name;
 }
 audioIC[] =
 {
         /* 0-4 */
-        {AUDIO_CHIP_NONE,     "None"},
-        {AUDIO_CHIP_TEA6300,  "TEA6300"},
-        {AUDIO_CHIP_TEA6300,  "TEA6320"},
-        {AUDIO_CHIP_TDA985X,  "TDA9850"},
-        {AUDIO_CHIP_MSP34XX,  "MSP3400C"},
+        { V4L2_IDENT_NONE,      "None"      },
+        { V4L2_IDENT_UNKNOWN,   "TEA6300"   },
+        { V4L2_IDENT_UNKNOWN,   "TEA6320"   },
+        { V4L2_IDENT_UNKNOWN,   "TDA9850"   },
+        { V4L2_IDENT_MSPX4XX,   "MSP3400C"  },
         /* 5-9 */
-        {AUDIO_CHIP_MSP34XX,  "MSP3410D"},
-        {AUDIO_CHIP_MSP34XX,  "MSP3415"},
-        {AUDIO_CHIP_MSP34XX,  "MSP3430"},
-        {AUDIO_CHIP_MSP34XX,  "MSP3438"},
-        {AUDIO_CHIP_UNKNOWN,  "CS5331"},
+        { V4L2_IDENT_MSPX4XX,   "MSP3410D"  },
+        { V4L2_IDENT_MSPX4XX,   "MSP3415"   },
+        { V4L2_IDENT_MSPX4XX,   "MSP3430"   },
+        { V4L2_IDENT_MSPX4XX,   "MSP3438"   },
+        { V4L2_IDENT_UNKNOWN,   "CS5331"    },
         /* 10-14 */
-        {AUDIO_CHIP_MSP34XX,  "MSP3435"},
-        {AUDIO_CHIP_MSP34XX,  "MSP3440"},
-        {AUDIO_CHIP_MSP34XX,  "MSP3445"},
-        {AUDIO_CHIP_MSP34XX,  "MSP3411"},
-        {AUDIO_CHIP_MSP34XX,  "MSP3416"},
+        { V4L2_IDENT_MSPX4XX,   "MSP3435"   },
+        { V4L2_IDENT_MSPX4XX,   "MSP3440"   },
+        { V4L2_IDENT_MSPX4XX,   "MSP3445"   },
+        { V4L2_IDENT_MSPX4XX,   "MSP3411"   },
+        { V4L2_IDENT_MSPX4XX,   "MSP3416"   },
         /* 15-19 */
-        {AUDIO_CHIP_MSP34XX,  "MSP3425"},
-        {AUDIO_CHIP_MSP34XX,  "MSP3451"},
-        {AUDIO_CHIP_MSP34XX,  "MSP3418"},
-        {AUDIO_CHIP_UNKNOWN,  "Type 0x12"},
-        {AUDIO_CHIP_UNKNOWN,  "OKI7716"},
+        { V4L2_IDENT_MSPX4XX,   "MSP3425"   },
+        { V4L2_IDENT_MSPX4XX,   "MSP3451"   },
+        { V4L2_IDENT_MSPX4XX,   "MSP3418"   },
+        { V4L2_IDENT_UNKNOWN,   "Type 0x12" },
+        { V4L2_IDENT_UNKNOWN,   "OKI7716"   },
         /* 20-24 */
-        {AUDIO_CHIP_MSP34XX,  "MSP4410"},
-        {AUDIO_CHIP_MSP34XX,  "MSP4420"},
-        {AUDIO_CHIP_MSP34XX,  "MSP4440"},
-        {AUDIO_CHIP_MSP34XX,  "MSP4450"},
-        {AUDIO_CHIP_MSP34XX,  "MSP4408"},
+        { V4L2_IDENT_MSPX4XX,   "MSP4410"   },
+        { V4L2_IDENT_MSPX4XX,   "MSP4420"   },
+        { V4L2_IDENT_MSPX4XX,   "MSP4440"   },
+        { V4L2_IDENT_MSPX4XX,   "MSP4450"   },
+        { V4L2_IDENT_MSPX4XX,   "MSP4408"   },
         /* 25-29 */
-        {AUDIO_CHIP_MSP34XX,  "MSP4418"},
-        {AUDIO_CHIP_MSP34XX,  "MSP4428"},
-        {AUDIO_CHIP_MSP34XX,  "MSP4448"},
-        {AUDIO_CHIP_MSP34XX,  "MSP4458"},
-        {AUDIO_CHIP_MSP34XX,  "Type 0x1d"},
+        { V4L2_IDENT_MSPX4XX,   "MSP4418"   },
+        { V4L2_IDENT_MSPX4XX,   "MSP4428"   },
+        { V4L2_IDENT_MSPX4XX,   "MSP4448"   },
+        { V4L2_IDENT_MSPX4XX,   "MSP4458"   },
+        { V4L2_IDENT_MSPX4XX,   "Type 0x1d" },
         /* 30-34 */
-        {AUDIO_CHIP_INTERNAL, "CX880"},
-        {AUDIO_CHIP_INTERNAL, "CX881"},
-        {AUDIO_CHIP_INTERNAL, "CX883"},
-        {AUDIO_CHIP_INTERNAL, "CX882"},
-        {AUDIO_CHIP_INTERNAL, "CX25840"},
+        { V4L2_IDENT_AMBIGUOUS, "CX880"     },
+        { V4L2_IDENT_AMBIGUOUS, "CX881"     },
+        { V4L2_IDENT_AMBIGUOUS, "CX883"     },
+        { V4L2_IDENT_AMBIGUOUS, "CX882"     },
+        { V4L2_IDENT_AMBIGUOUS, "CX25840"   },
         /* 35-39 */
-        {AUDIO_CHIP_INTERNAL, "CX25841"},
-        {AUDIO_CHIP_INTERNAL, "CX25842"},
-        {AUDIO_CHIP_INTERNAL, "CX25843"},
-        {AUDIO_CHIP_INTERNAL, "CX23418"},
-        {AUDIO_CHIP_INTERNAL, "CX23885"},
+        { V4L2_IDENT_AMBIGUOUS, "CX25841"   },
+        { V4L2_IDENT_AMBIGUOUS, "CX25842"   },
+        { V4L2_IDENT_AMBIGUOUS, "CX25843"   },
+        { V4L2_IDENT_AMBIGUOUS, "CX23418"   },
+        { V4L2_IDENT_AMBIGUOUS, "CX23885"   },
         /* 40-44 */
-        {AUDIO_CHIP_INTERNAL, "CX23888"},
-        {AUDIO_CHIP_INTERNAL, "SAA7131"},
-        {AUDIO_CHIP_INTERNAL, "CX23887"},
-        {AUDIO_CHIP_INTERNAL, "SAA7164"},
-        {AUDIO_CHIP_INTERNAL, "AU8522"},
+        { V4L2_IDENT_AMBIGUOUS, "CX23888"   },
+        { V4L2_IDENT_AMBIGUOUS, "SAA7131"   },
+        { V4L2_IDENT_AMBIGUOUS, "CX23887"   },
+        { V4L2_IDENT_AMBIGUOUS, "SAA7164"   },
+        { V4L2_IDENT_AMBIGUOUS, "AU8522"    },
 };
 
 /* This list is supplied by Hauppauge. Thanks! */
@@ -483,7 +485,7 @@ void tveeprom_hauppauge_analog(struct i2c_client *c, struct tveeprom *tvee,
                         tvee->has_radio = eeprom_data[i+len-1];
                         /* old style tag, don't know how to detect
                         IR presence, mark as unknown. */
-                        tvee->has_ir = -1;
+                        tvee->has_ir = 0;
                         tvee->model =
                                 eeprom_data[i+8] +
                                 (eeprom_data[i+9] << 8);
@@ -509,7 +511,7 @@ void tveeprom_hauppauge_analog(struct i2c_client *c, struct tveeprom *tvee,
                         if (audioic < ARRAY_SIZE(audioIC))
                                 tvee->audio_processor = audioIC[audioic].id;
                         else
-                                tvee->audio_processor = AUDIO_CHIP_UNKNOWN;
+                                tvee->audio_processor = V4L2_IDENT_UNKNOWN;
                         break;
 
                 /* case 0x03: tag 'EEInfo' */
@@ -542,7 +544,7 @@ void tveeprom_hauppauge_analog(struct i2c_client *c, struct tveeprom *tvee,
                         if (audioic < ARRAY_SIZE(audioIC))
                                 tvee->audio_processor = audioIC[audioic].id;
                         else
-                                tvee->audio_processor = AUDIO_CHIP_UNKNOWN;
+                                tvee->audio_processor = V4L2_IDENT_UNKNOWN;
 
                         break;
 
@@ -603,7 +605,7 @@ void tveeprom_hauppauge_analog(struct i2c_client *c, struct tveeprom *tvee,
 
                 case 0x0f:
                         /* tag 'IRInfo' */
-                        tvee->has_ir = eeprom_data[i+1];
+                        tvee->has_ir = 1 | (eeprom_data[i+1] << 1);
                         break;
 
                 /* case 0x10: tag 'VBIInfo' */
@@ -690,7 +692,7 @@ void tveeprom_hauppauge_analog(struct i2c_client *c, struct tveeprom *tvee,
                         t_fmt_name2[6], t_fmt_name2[7], t_format2);
         if (audioic < 0) {
                 tveeprom_info("audio processor is unknown (no idx)\n");
-                tvee->audio_processor = AUDIO_CHIP_UNKNOWN;
+                tvee->audio_processor = V4L2_IDENT_UNKNOWN;
         } else {
                 if (audioic < ARRAY_SIZE(audioIC))
                         tveeprom_info("audio processor is %s (idx %d)\n",
@@ -703,14 +705,14 @@ void tveeprom_hauppauge_analog(struct i2c_client *c, struct tveeprom *tvee,
                 tveeprom_info("decoder processor is %s (idx %d)\n",
                         STRM(decoderIC, tvee->decoder_processor),
                         tvee->decoder_processor);
-        if (tvee->has_ir == -1)
-                tveeprom_info("has %sradio\n",
-                                tvee->has_radio ? "" : "no ");
-        else
+        if (tvee->has_ir)
                 tveeprom_info("has %sradio, has %sIR receiver, has %sIR transmitter\n",
                                 tvee->has_radio ? "" : "no ",
-                                (tvee->has_ir & 1) ? "" : "no ",
-                                (tvee->has_ir & 2) ? "" : "no ");
+                                (tvee->has_ir & 2) ? "" : "no ",
+                                (tvee->has_ir & 4) ? "" : "no ");
+        else
+                tveeprom_info("has %sradio\n",
+                                tvee->has_radio ? "" : "no ");
 }
 EXPORT_SYMBOL(tveeprom_hauppauge_analog);
 
diff --git a/drivers/media/video/tvp5150.c b/drivers/media/video/tvp5150.c
index 6a3af1005f03..28af5ce5560d 100644
--- a/drivers/media/video/tvp5150.c
+++ b/drivers/media/video/tvp5150.c
@@ -6,7 +6,7 @@
  */
 
 #include <linux/i2c.h>
-#include <linux/videodev.h>
+#include <linux/videodev2.h>
 #include <linux/delay.h>
 #include <linux/video_decoder.h>
 #include <media/v4l2-common.h>
diff --git a/drivers/media/video/usbvideo/usbvideo.c b/drivers/media/video/usbvideo/usbvideo.c
index 4128ee20b64e..bf1bc2f69b02 100644
--- a/drivers/media/video/usbvideo/usbvideo.c
+++ b/drivers/media/video/usbvideo/usbvideo.c
@@ -952,8 +952,6 @@ static const struct file_operations usbvideo_fops = {
         .llseek = no_llseek,
 };
 static const struct video_device usbvideo_template = {
-        .owner =      THIS_MODULE,
-        .type =       VID_TYPE_CAPTURE,
         .fops =       &usbvideo_fops,
 };
 
@@ -1040,7 +1038,7 @@ int usbvideo_RegisterVideoDevice(struct uvd *uvd)
                 err("%s: uvd->dev == NULL", __func__);
                 return -EINVAL;
         }
-        uvd->vdev.dev = &uvd->dev->dev;
+        uvd->vdev.parent = &uvd->dev->dev;
         if (video_register_device(&uvd->vdev, VFL_TYPE_GRABBER, video_nr) == -1) {
                 err("%s: video_register_device failed", __func__);
                 return -EPIPE;
diff --git a/drivers/media/video/usbvideo/usbvideo.h b/drivers/media/video/usbvideo/usbvideo.h
index 051775d4c726..c66985beb8c9 100644
--- a/drivers/media/video/usbvideo/usbvideo.h
+++ b/drivers/media/video/usbvideo/usbvideo.h
@@ -18,6 +18,7 @@
 
 #include <linux/videodev.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <linux/usb.h>
 #include <linux/mutex.h>
 
diff --git a/drivers/media/video/usbvideo/vicam.c b/drivers/media/video/usbvideo/vicam.c
index 40d053e0d5bf..b7792451a299 100644
--- a/drivers/media/video/usbvideo/vicam.c
+++ b/drivers/media/video/usbvideo/vicam.c
@@ -41,6 +41,7 @@
 #include <linux/videodev.h>
 #include <linux/usb.h>
 #include <linux/vmalloc.h>
+#include <linux/mm.h>
 #include <linux/slab.h>
 #include <linux/mutex.h>
 #include <linux/firmware.h>
@@ -791,9 +792,7 @@ static const struct file_operations vicam_fops = {
 };
 
 static struct video_device vicam_template = {
-        .owner          = THIS_MODULE,
         .name           = "ViCam-based USB Camera",
-        .type           = VID_TYPE_CAPTURE,
         .fops           = &vicam_fops,
         .minor          = -1,
 };
diff --git a/drivers/media/video/usbvision/usbvision-core.c b/drivers/media/video/usbvision/usbvision-core.c
index abf685464b7c..c317ed7a8482 100644
--- a/drivers/media/video/usbvision/usbvision-core.c
+++ b/drivers/media/video/usbvision/usbvision-core.c
@@ -30,7 +30,6 @@
 #include <linux/mm.h>
 #include <linux/utsname.h>
 #include <linux/highmem.h>
-#include <linux/videodev.h>
 #include <linux/vmalloc.h>
 #include <linux/module.h>
 #include <linux/init.h>
@@ -43,7 +42,6 @@
 #include <media/saa7115.h>
 #include <media/v4l2-common.h>
 #include <media/tuner.h>
-#include <media/audiochip.h>
 
 #include <linux/workqueue.h>
 
diff --git a/drivers/media/video/usbvision/usbvision-video.c b/drivers/media/video/usbvision/usbvision-video.c
index cd6c41d67899..b977116a0dd9 100644
--- a/drivers/media/video/usbvision/usbvision-video.c
+++ b/drivers/media/video/usbvision/usbvision-video.c
@@ -53,7 +53,6 @@
 #include <linux/mm.h>
 #include <linux/utsname.h>
 #include <linux/highmem.h>
-#include <linux/videodev.h>
 #include <linux/vmalloc.h>
 #include <linux/module.h>
 #include <linux/init.h>
@@ -65,8 +64,8 @@
 
 #include <media/saa7115.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <media/tuner.h>
-#include <media/audiochip.h>
 
 #include <linux/workqueue.h>
 
@@ -184,7 +183,7 @@ MODULE_ALIAS(DRIVER_ALIAS);
 static inline struct usb_usbvision *cd_to_usbvision(struct device *cd)
 {
         struct video_device *vdev =
-                container_of(cd, struct video_device, class_dev);
+                container_of(cd, struct video_device, dev);
         return video_get_drvdata(vdev);
 }
 
@@ -199,7 +198,7 @@ static ssize_t show_model(struct device *cd,
                           struct device_attribute *attr, char *buf)
 {
         struct video_device *vdev =
-                container_of(cd, struct video_device, class_dev);
+                container_of(cd, struct video_device, dev);
         struct usb_usbvision *usbvision = video_get_drvdata(vdev);
         return sprintf(buf, "%s\n",
                        usbvision_device_data[usbvision->DevModel].ModelString);
@@ -210,7 +209,7 @@ static ssize_t show_hue(struct device *cd,
                         struct device_attribute *attr, char *buf)
 {
         struct video_device *vdev =
-                container_of(cd, struct video_device, class_dev);
+                container_of(cd, struct video_device, dev);
         struct usb_usbvision *usbvision = video_get_drvdata(vdev);
         struct v4l2_control ctrl;
         ctrl.id = V4L2_CID_HUE;
@@ -225,7 +224,7 @@ static ssize_t show_contrast(struct device *cd,
                              struct device_attribute *attr, char *buf)
 {
         struct video_device *vdev =
-                container_of(cd, struct video_device, class_dev);
+                container_of(cd, struct video_device, dev);
         struct usb_usbvision *usbvision = video_get_drvdata(vdev);
         struct v4l2_control ctrl;
         ctrl.id = V4L2_CID_CONTRAST;
@@ -240,7 +239,7 @@ static ssize_t show_brightness(struct device *cd,
                                struct device_attribute *attr, char *buf)
 {
         struct video_device *vdev =
-                container_of(cd, struct video_device, class_dev);
+                container_of(cd, struct video_device, dev);
         struct usb_usbvision *usbvision = video_get_drvdata(vdev);
         struct v4l2_control ctrl;
         ctrl.id = V4L2_CID_BRIGHTNESS;
@@ -255,7 +254,7 @@ static ssize_t show_saturation(struct device *cd,
                                struct device_attribute *attr, char *buf)
 {
         struct video_device *vdev =
-                container_of(cd, struct video_device, class_dev);
+                container_of(cd, struct video_device, dev);
         struct usb_usbvision *usbvision = video_get_drvdata(vdev);
         struct v4l2_control ctrl;
         ctrl.id = V4L2_CID_SATURATION;
@@ -270,7 +269,7 @@ static ssize_t show_streaming(struct device *cd,
                               struct device_attribute *attr, char *buf)
 {
         struct video_device *vdev =
-                container_of(cd, struct video_device, class_dev);
+                container_of(cd, struct video_device, dev);
         struct usb_usbvision *usbvision = video_get_drvdata(vdev);
         return sprintf(buf, "%s\n",
                        YES_NO(usbvision->streaming==Stream_On?1:0));
@@ -281,7 +280,7 @@ static ssize_t show_compression(struct device *cd,
                                 struct device_attribute *attr, char *buf)
 {
         struct video_device *vdev =
-                container_of(cd, struct video_device, class_dev);
+                container_of(cd, struct video_device, dev);
         struct usb_usbvision *usbvision = video_get_drvdata(vdev);
         return sprintf(buf, "%s\n",
                        YES_NO(usbvision->isocMode==ISOC_MODE_COMPRESS));
@@ -292,7 +291,7 @@ static ssize_t show_device_bridge(struct device *cd,
                                   struct device_attribute *attr, char *buf)
 {
         struct video_device *vdev =
-                container_of(cd, struct video_device, class_dev);
+                container_of(cd, struct video_device, dev);
         struct usb_usbvision *usbvision = video_get_drvdata(vdev);
         return sprintf(buf, "%d\n", usbvision->bridgeType);
 }
@@ -304,40 +303,31 @@ static void usbvision_create_sysfs(struct video_device *vdev)
         if (!vdev)
                 return;
         do {
-                res = device_create_file(&vdev->class_dev,
-                                         &dev_attr_version);
+                res = device_create_file(&vdev->dev, &dev_attr_version);
                 if (res<0)
                         break;
-                res = device_create_file(&vdev->class_dev,
-                                         &dev_attr_model);
+                res = device_create_file(&vdev->dev, &dev_attr_model);
                 if (res<0)
                         break;
-                res = device_create_file(&vdev->class_dev,
-                                         &dev_attr_hue);
+                res = device_create_file(&vdev->dev, &dev_attr_hue);
                 if (res<0)
                         break;
-                res = device_create_file(&vdev->class_dev,
-                                         &dev_attr_contrast);
+                res = device_create_file(&vdev->dev, &dev_attr_contrast);
                 if (res<0)
                         break;
-                res = device_create_file(&vdev->class_dev,
-                                         &dev_attr_brightness);
+                res = device_create_file(&vdev->dev, &dev_attr_brightness);
                 if (res<0)
                         break;
-                res = device_create_file(&vdev->class_dev,
-                                         &dev_attr_saturation);
+                res = device_create_file(&vdev->dev, &dev_attr_saturation);
                 if (res<0)
                         break;
-                res = device_create_file(&vdev->class_dev,
-                                         &dev_attr_streaming);
+                res = device_create_file(&vdev->dev, &dev_attr_streaming);
                 if (res<0)
                         break;
-                res = device_create_file(&vdev->class_dev,
-                                         &dev_attr_compression);
+                res = device_create_file(&vdev->dev, &dev_attr_compression);
                 if (res<0)
                         break;
-                res = device_create_file(&vdev->class_dev,
-                                         &dev_attr_bridge);
+                res = device_create_file(&vdev->dev, &dev_attr_bridge);
                 if (res>=0)
                         return;
         } while (0);
@@ -348,24 +338,15 @@ static void usbvision_create_sysfs(struct video_device *vdev)
 static void usbvision_remove_sysfs(struct video_device *vdev)
 {
         if (vdev) {
-                device_remove_file(&vdev->class_dev,
-                                         &dev_attr_version);
-                device_remove_file(&vdev->class_dev,
-                                         &dev_attr_model);
-                device_remove_file(&vdev->class_dev,
-                                         &dev_attr_hue);
-                device_remove_file(&vdev->class_dev,
-                                         &dev_attr_contrast);
-                device_remove_file(&vdev->class_dev,
-                                         &dev_attr_brightness);
-                device_remove_file(&vdev->class_dev,
-                                         &dev_attr_saturation);
-                device_remove_file(&vdev->class_dev,
-                                         &dev_attr_streaming);
-                device_remove_file(&vdev->class_dev,
-                                         &dev_attr_compression);
-                device_remove_file(&vdev->class_dev,
-                                         &dev_attr_bridge);
+                device_remove_file(&vdev->dev, &dev_attr_version);
+                device_remove_file(&vdev->dev, &dev_attr_model);
+                device_remove_file(&vdev->dev, &dev_attr_hue);
+                device_remove_file(&vdev->dev, &dev_attr_contrast);
+                device_remove_file(&vdev->dev, &dev_attr_brightness);
+                device_remove_file(&vdev->dev, &dev_attr_saturation);
+                device_remove_file(&vdev->dev, &dev_attr_streaming);
+                device_remove_file(&vdev->dev, &dev_attr_compression);
+                device_remove_file(&vdev->dev, &dev_attr_bridge);
         }
 }
 
@@ -1388,13 +1369,8 @@ static const struct file_operations usbvision_fops = {
 /*      .poll          = video_poll, */
         .compat_ioctl  = v4l_compat_ioctl32,
 };
-static struct video_device usbvision_video_template = {
-        .owner             = THIS_MODULE,
-        .type           = VID_TYPE_TUNER | VID_TYPE_CAPTURE,
-        .fops           = &usbvision_fops,
-        .name           = "usbvision-video",
-        .release        = video_device_release,
-        .minor          = -1,
+
+static const struct v4l2_ioctl_ops usbvision_ioctl_ops = {
         .vidioc_querycap      = vidioc_querycap,
         .vidioc_enum_fmt_vid_cap  = vidioc_enum_fmt_vid_cap,
         .vidioc_g_fmt_vid_cap     = vidioc_g_fmt_vid_cap,
@@ -1426,6 +1402,14 @@ static struct video_device usbvision_video_template = {
         .vidioc_g_register    = vidioc_g_register,
         .vidioc_s_register    = vidioc_s_register,
 #endif
+};
+
+static struct video_device usbvision_video_template = {
+        .fops           = &usbvision_fops,
+        .ioctl_ops      = &usbvision_ioctl_ops,
+        .name           = "usbvision-video",
+        .release        = video_device_release,
+        .minor          = -1,
         .tvnorms              = USBVISION_NORMS,
         .current_norm         = V4L2_STD_PAL
 };
@@ -1441,14 +1425,7 @@ static const struct file_operations usbvision_radio_fops = {
         .compat_ioctl  = v4l_compat_ioctl32,
 };
 
-static struct video_device usbvision_radio_template=
-{
-        .owner             = THIS_MODULE,
-        .type           = VID_TYPE_TUNER,
-        .fops           = &usbvision_radio_fops,
-        .name           = "usbvision-radio",
-        .release        = video_device_release,
-        .minor          = -1,
+static const struct v4l2_ioctl_ops usbvision_radio_ioctl_ops = {
         .vidioc_querycap      = vidioc_querycap,
         .vidioc_enum_input    = vidioc_enum_input,
         .vidioc_g_input       = vidioc_g_input,
@@ -1462,6 +1439,14 @@ static struct video_device usbvision_radio_template=
         .vidioc_s_tuner       = vidioc_s_tuner,
         .vidioc_g_frequency   = vidioc_g_frequency,
         .vidioc_s_frequency   = vidioc_s_frequency,
+};
+
+static struct video_device usbvision_radio_template = {
+        .fops           = &usbvision_radio_fops,
+        .name           = "usbvision-radio",
+        .release        = video_device_release,
+        .minor          = -1,
+        .ioctl_ops      = &usbvision_radio_ioctl_ops,
 
         .tvnorms              = USBVISION_NORMS,
         .current_norm         = V4L2_STD_PAL
@@ -1479,8 +1464,6 @@ static const struct file_operations usbvision_vbi_fops = {
 
 static struct video_device usbvision_vbi_template=
 {
-        .owner             = THIS_MODULE,
-        .type           = VID_TYPE_TUNER,
         .fops           = &usbvision_vbi_fops,
         .release        = video_device_release,
         .name           = "usbvision-vbi",
@@ -1506,7 +1489,7 @@ static struct video_device *usbvision_vdev_init(struct usb_usbvision *usbvision,
         }
         *vdev = *vdev_template;
 //      vdev->minor   = -1;
-        vdev->dev     = &usb_dev->dev;
+        vdev->parent  = &usb_dev->dev;
         snprintf(vdev->name, sizeof(vdev->name), "%s", name);
         video_set_drvdata(vdev, usbvision);
         return vdev;
diff --git a/drivers/media/video/uvc/uvc_ctrl.c b/drivers/media/video/uvc/uvc_ctrl.c
index 3ae95512666f..626f4ad7e876 100644
--- a/drivers/media/video/uvc/uvc_ctrl.c
+++ b/drivers/media/video/uvc/uvc_ctrl.c
@@ -195,8 +195,8 @@ static struct uvc_menu_info power_line_frequency_controls[] = {
 };
 
 static struct uvc_menu_info exposure_auto_controls[] = {
-        { 1, "Manual Mode" },
         { 2, "Auto Mode" },
+        { 1, "Manual Mode" },
         { 4, "Shutter Priority Mode" },
         { 8, "Aperture Priority Mode" },
 };
@@ -592,6 +592,7 @@ int uvc_query_v4l2_ctrl(struct uvc_video_device *video,
         if (ctrl == NULL)
                 return -EINVAL;
 
+        memset(v4l2_ctrl, 0, sizeof *v4l2_ctrl);
         v4l2_ctrl->id = mapping->id;
         v4l2_ctrl->type = mapping->v4l2_type;
         strncpy(v4l2_ctrl->name, mapping->name, sizeof v4l2_ctrl->name);
@@ -608,7 +609,8 @@ int uvc_query_v4l2_ctrl(struct uvc_video_device *video,
                 v4l2_ctrl->default_value = uvc_get_le_value(data, mapping);
         }
 
-        if (mapping->v4l2_type == V4L2_CTRL_TYPE_MENU) {
+        switch (mapping->v4l2_type) {
+        case V4L2_CTRL_TYPE_MENU:
                 v4l2_ctrl->minimum = 0;
                 v4l2_ctrl->maximum = mapping->menu_count - 1;
                 v4l2_ctrl->step = 1;
@@ -622,6 +624,15 @@ int uvc_query_v4l2_ctrl(struct uvc_video_device *video,
                 }
 
                 return 0;
+
+        case V4L2_CTRL_TYPE_BOOLEAN:
+                v4l2_ctrl->minimum = 0;
+                v4l2_ctrl->maximum = 1;
+                v4l2_ctrl->step = 1;
+                return 0;
+
+        default:
+                break;
         }
 
         if (ctrl->info->flags & UVC_CONTROL_GET_MIN) {
diff --git a/drivers/media/video/uvc/uvc_driver.c b/drivers/media/video/uvc/uvc_driver.c
index f2b2983fe062..b3c4d75e8490 100644
--- a/drivers/media/video/uvc/uvc_driver.c
+++ b/drivers/media/video/uvc/uvc_driver.c
@@ -1458,9 +1458,7 @@ static int uvc_register_video(struct uvc_device *dev)
          * unregistered before the reference is released, so we don't need to
          * get another one.
          */
-        vdev->dev = &dev->intf->dev;
-        vdev->type = 0;
-        vdev->type2 = 0;
+        vdev->parent = &dev->intf->dev;
         vdev->minor = -1;
         vdev->fops = &uvc_fops;
         vdev->release = video_device_release;
diff --git a/drivers/media/video/uvc/uvc_v4l2.c b/drivers/media/video/uvc/uvc_v4l2.c
index b5a11eb8f9fa..d7bd71be40a9 100644
--- a/drivers/media/video/uvc/uvc_v4l2.c
+++ b/drivers/media/video/uvc/uvc_v4l2.c
@@ -23,6 +23,7 @@
 #include <asm/atomic.h>
 
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 
 #include "uvcvideo.h"
 
diff --git a/drivers/media/video/v4l1-compat.c b/drivers/media/video/v4l1-compat.c
index a0f6c60279ec..79937d1031fc 100644
--- a/drivers/media/video/v4l1-compat.c
+++ b/drivers/media/video/v4l1-compat.c
@@ -30,6 +30,7 @@
 #include <linux/slab.h>
 #include <linux/videodev.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 
 #include <asm/uaccess.h>
 #include <asm/system.h>
diff --git a/drivers/media/video/v4l2-common.c b/drivers/media/video/v4l2-common.c
index e9dd996fd5df..88ca13104417 100644
--- a/drivers/media/video/v4l2-common.c
+++ b/drivers/media/video/v4l2-common.c
@@ -64,7 +64,7 @@
 #include <linux/kmod.h>
 #endif
 
-#include <linux/videodev.h>
+#include <linux/videodev2.h>
 
 MODULE_AUTHOR("Bill Dirks, Justin Schoeman, Gerd Knorr");
 MODULE_DESCRIPTION("misc helper functions for v4l2 device drivers");
diff --git a/drivers/media/video/v4l2-dev.c b/drivers/media/video/v4l2-dev.c
new file mode 100644
index 000000000000..556615fe93de
--- /dev/null
+++ b/drivers/media/video/v4l2-dev.c
@@ -0,0 +1,422 @@
+/*
+ * Video capture interface for Linux version 2
+ *
+ *      A generic video device interface for the LINUX operating system
+ *      using a set of device structures/vectors for low level operations.
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ *
+ * Authors:     Alan Cox, <alan@redhat.com> (version 1)
+ *              Mauro Carvalho Chehab <mchehab@infradead.org> (version 2)
+ *
+ * Fixes:       20000516  Claudio Matsuoka <claudio@conectiva.com>
+ *              - Added procfs support
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/kmod.h>
+#include <linux/slab.h>
+#include <linux/smp_lock.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+
+#include <media/v4l2-common.h>
+
+#define VIDEO_NUM_DEVICES       256
+#define VIDEO_NAME              "video4linux"
+
+/*
+ *      sysfs stuff
+ */
+
+static ssize_t show_index(struct device *cd,
+                         struct device_attribute *attr, char *buf)
+{
+        struct video_device *vfd = container_of(cd, struct video_device, dev);
+        return sprintf(buf, "%i\n", vfd->index);
+}
+
+static ssize_t show_name(struct device *cd,
+                         struct device_attribute *attr, char *buf)
+{
+        struct video_device *vfd = container_of(cd, struct video_device, dev);
+        return sprintf(buf, "%.*s\n", (int)sizeof(vfd->name), vfd->name);
+}
+
+static struct device_attribute video_device_attrs[] = {
+        __ATTR(name, S_IRUGO, show_name, NULL),
+        __ATTR(index, S_IRUGO, show_index, NULL),
+        __ATTR_NULL
+};
+
+struct video_device *video_device_alloc(void)
+{
+        struct video_device *vfd;
+
+        vfd = kzalloc(sizeof(*vfd), GFP_KERNEL);
+        return vfd;
+}
+EXPORT_SYMBOL(video_device_alloc);
+
+void video_device_release(struct video_device *vfd)
+{
+        kfree(vfd);
+}
+EXPORT_SYMBOL(video_device_release);
+
+static void video_release(struct device *cd)
+{
+        struct video_device *vfd = container_of(cd, struct video_device, dev);
+
+#if 1
+        /* needed until all drivers are fixed */
+        if (!vfd->release)
+                return;
+#endif
+        vfd->release(vfd);
+}
+
+static struct class video_class = {
+        .name = VIDEO_NAME,
+        .dev_attrs = video_device_attrs,
+        .dev_release = video_release,
+};
+
+/*
+ *      Active devices
+ */
+
+static struct video_device *video_device[VIDEO_NUM_DEVICES];
+static DEFINE_MUTEX(videodev_lock);
+
+struct video_device *video_devdata(struct file *file)
+{
+        return video_device[iminor(file->f_path.dentry->d_inode)];
+}
+EXPORT_SYMBOL(video_devdata);
+
+/*
+ *      Open a video device - FIXME: Obsoleted
+ */
+static int video_open(struct inode *inode, struct file *file)
+{
+        unsigned int minor = iminor(inode);
+        int err = 0;
+        struct video_device *vfl;
+        const struct file_operations *old_fops;
+
+        if (minor >= VIDEO_NUM_DEVICES)
+                return -ENODEV;
+        lock_kernel();
+        mutex_lock(&videodev_lock);
+        vfl = video_device[minor];
+        if (vfl == NULL) {
+                mutex_unlock(&videodev_lock);
+                request_module("char-major-%d-%d", VIDEO_MAJOR, minor);
+                mutex_lock(&videodev_lock);
+                vfl = video_device[minor];
+                if (vfl == NULL) {
+                        mutex_unlock(&videodev_lock);
+                        unlock_kernel();
+                        return -ENODEV;
+                }
+        }
+        old_fops = file->f_op;
+        file->f_op = fops_get(vfl->fops);
+        if (file->f_op->open)
+                err = file->f_op->open(inode, file);
+        if (err) {
+                fops_put(file->f_op);
+                file->f_op = fops_get(old_fops);
+        }
+        fops_put(old_fops);
+        mutex_unlock(&videodev_lock);
+        unlock_kernel();
+        return err;
+}
+
+/*
+ * open/release helper functions -- handle exclusive opens
+ * Should be removed soon
+ */
+int video_exclusive_open(struct inode *inode, struct file *file)
+{
+        struct video_device *vfl = video_devdata(file);
+        int retval = 0;
+
+        mutex_lock(&vfl->lock);
+        if (vfl->users)
+                retval = -EBUSY;
+        else
+                vfl->users++;
+        mutex_unlock(&vfl->lock);
+        return retval;
+}
+EXPORT_SYMBOL(video_exclusive_open);
+
+int video_exclusive_release(struct inode *inode, struct file *file)
+{
+        struct video_device *vfl = video_devdata(file);
+
+        vfl->users--;
+        return 0;
+}
+EXPORT_SYMBOL(video_exclusive_release);
+
+/**
+ * get_index - assign stream number based on parent device
+ * @vdev: video_device to assign index number to, vdev->dev should be assigned
+ * @num: -1 if auto assign, requested number otherwise
+ *
+ *
+ * returns -ENFILE if num is already in use, a free index number if
+ * successful.
+ */
+static int get_index(struct video_device *vdev, int num)
+{
+        u32 used = 0;
+        const int max_index = sizeof(used) * 8 - 1;
+        int i;
+
+        /* Currently a single v4l driver instance cannot create more than
+           32 devices.
+           Increase to u64 or an array of u32 if more are needed. */
+        if (num > max_index) {
+                printk(KERN_ERR "videodev: %s num is too large\n", __func__);
+                return -EINVAL;
+        }
+
+        for (i = 0; i < VIDEO_NUM_DEVICES; i++) {
+                if (video_device[i] != NULL &&
+                    video_device[i] != vdev &&
+                    video_device[i]->parent == vdev->parent) {
+                        used |= 1 << video_device[i]->index;
+                }
+        }
+
+        if (num >= 0) {
+                if (used & (1 << num))
+                        return -ENFILE;
+                return num;
+        }
+
+        i = ffz(used);
+        return i > max_index ? -ENFILE : i;
+}
+
+static const struct file_operations video_fops;
+
+int video_register_device(struct video_device *vfd, int type, int nr)
+{
+        return video_register_device_index(vfd, type, nr, -1);
+}
+EXPORT_SYMBOL(video_register_device);
+
+/**
+ *      video_register_device - register video4linux devices
+ *      @vfd:  video device structure we want to register
+ *      @type: type of device to register
+ *      @nr:   which device number (0 == /dev/video0, 1 == /dev/video1, ...
+ *             -1 == first free)
+ *
+ *      The registration code assigns minor numbers based on the type
+ *      requested. -ENFILE is returned in all the device slots for this
+ *      category are full. If not then the minor field is set and the
+ *      driver initialize function is called (if non %NULL).
+ *
+ *      Zero is returned on success.
+ *
+ *      Valid types are
+ *
+ *      %VFL_TYPE_GRABBER - A frame grabber
+ *
+ *      %VFL_TYPE_VTX - A teletext device
+ *
+ *      %VFL_TYPE_VBI - Vertical blank data (undecoded)
+ *
+ *      %VFL_TYPE_RADIO - A radio card
+ */
+
+int video_register_device_index(struct video_device *vfd, int type, int nr,
+                                        int index)
+{
+        int i = 0;
+        int base;
+        int end;
+        int ret;
+        char *name_base;
+
+        switch (type) {
+        case VFL_TYPE_GRABBER:
+                base = MINOR_VFL_TYPE_GRABBER_MIN;
+                end = MINOR_VFL_TYPE_GRABBER_MAX+1;
+                name_base = "video";
+                break;
+        case VFL_TYPE_VTX:
+                base = MINOR_VFL_TYPE_VTX_MIN;
+                end = MINOR_VFL_TYPE_VTX_MAX+1;
+                name_base = "vtx";
+                break;
+        case VFL_TYPE_VBI:
+                base = MINOR_VFL_TYPE_VBI_MIN;
+                end = MINOR_VFL_TYPE_VBI_MAX+1;
+                name_base = "vbi";
+                break;
+        case VFL_TYPE_RADIO:
+                base = MINOR_VFL_TYPE_RADIO_MIN;
+                end = MINOR_VFL_TYPE_RADIO_MAX+1;
+                name_base = "radio";
+                break;
+        default:
+                printk(KERN_ERR "%s called with unknown type: %d\n",
+                       __func__, type);
+                return -1;
+        }
+
+        /* pick a minor number */
+        mutex_lock(&videodev_lock);
+        if (nr >= 0  &&  nr < end-base) {
+                /* use the one the driver asked for */
+                i = base + nr;
+                if (NULL != video_device[i]) {
+                        mutex_unlock(&videodev_lock);
+                        return -ENFILE;
+                }
+        } else {
+                /* use first free */
+                for (i = base; i < end; i++)
+                        if (NULL == video_device[i])
+                                break;
+                if (i == end) {
+                        mutex_unlock(&videodev_lock);
+                        return -ENFILE;
+                }
+        }
+        video_device[i] = vfd;
+        vfd->vfl_type = type;
+        vfd->minor = i;
+
+        ret = get_index(vfd, index);
+        vfd->index = ret;
+
+        mutex_unlock(&videodev_lock);
+
+        if (ret < 0) {
+                printk(KERN_ERR "%s: get_index failed\n", __func__);
+                goto fail_minor;
+        }
+
+        mutex_init(&vfd->lock);
+
+        /* sysfs class */
+        memset(&vfd->dev, 0x00, sizeof(vfd->dev));
+        vfd->dev.class = &video_class;
+        vfd->dev.devt = MKDEV(VIDEO_MAJOR, vfd->minor);
+        if (vfd->parent)
+                vfd->dev.parent = vfd->parent;
+        sprintf(vfd->dev.bus_id, "%s%d", name_base, i - base);
+        ret = device_register(&vfd->dev);
+        if (ret < 0) {
+                printk(KERN_ERR "%s: device_register failed\n", __func__);
+                goto fail_minor;
+        }
+
+#if 1
+        /* needed until all drivers are fixed */
+        if (!vfd->release)
+                printk(KERN_WARNING "videodev: \"%s\" has no release callback. "
+                       "Please fix your driver for proper sysfs support, see "
+                       "http://lwn.net/Articles/36850/\n", vfd->name);
+#endif
+        return 0;
+
+fail_minor:
+        mutex_lock(&videodev_lock);
+        video_device[vfd->minor] = NULL;
+        vfd->minor = -1;
+        mutex_unlock(&videodev_lock);
+        return ret;
+}
+EXPORT_SYMBOL(video_register_device_index);
+
+/**
+ *      video_unregister_device - unregister a video4linux device
+ *      @vfd: the device to unregister
+ *
+ *      This unregisters the passed device and deassigns the minor
+ *      number. Future open calls will be met with errors.
+ */
+
+void video_unregister_device(struct video_device *vfd)
+{
+        mutex_lock(&videodev_lock);
+        if (video_device[vfd->minor] != vfd)
+                panic("videodev: bad unregister");
+
+        video_device[vfd->minor] = NULL;
+        device_unregister(&vfd->dev);
+        mutex_unlock(&videodev_lock);
+}
+EXPORT_SYMBOL(video_unregister_device);
+
+/*
+ * Video fs operations
+ */
+static const struct file_operations video_fops = {
+        .owner          = THIS_MODULE,
+        .llseek         = no_llseek,
+        .open           = video_open,
+};
+
+/*
+ *      Initialise video for linux
+ */
+
+static int __init videodev_init(void)
+{
+        int ret;
+
+        printk(KERN_INFO "Linux video capture interface: v2.00\n");
+        if (register_chrdev(VIDEO_MAJOR, VIDEO_NAME, &video_fops)) {
+                printk(KERN_WARNING "video_dev: unable to get major %d\n", VIDEO_MAJOR);
+                return -EIO;
+        }
+
+        ret = class_register(&video_class);
+        if (ret < 0) {
+                unregister_chrdev(VIDEO_MAJOR, VIDEO_NAME);
+                printk(KERN_WARNING "video_dev: class_register failed\n");
+                return -EIO;
+        }
+
+        return 0;
+}
+
+static void __exit videodev_exit(void)
+{
+        class_unregister(&video_class);
+        unregister_chrdev(VIDEO_MAJOR, VIDEO_NAME);
+}
+
+module_init(videodev_init)
+module_exit(videodev_exit)
+
+MODULE_AUTHOR("Alan Cox, Mauro Carvalho Chehab <mchehab@infradead.org>");
+MODULE_DESCRIPTION("Device registrar for Video4Linux drivers v2");
+MODULE_LICENSE("GPL");
+
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
diff --git a/drivers/media/video/v4l2-ioctl.c b/drivers/media/video/v4l2-ioctl.c
new file mode 100644
index 000000000000..fdfe7739c96e
--- /dev/null
+++ b/drivers/media/video/v4l2-ioctl.c
@@ -0,0 +1,1875 @@
+/*
+ * Video capture interface for Linux version 2
+ *
+ * A generic framework to process V4L2 ioctl commands.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Authors:     Alan Cox, <alan@redhat.com> (version 1)
+ *              Mauro Carvalho Chehab <mchehab@infradead.org> (version 2)
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+
+#define __OLD_VIDIOC_ /* To allow fixing old calls */
+#include <linux/videodev2.h>
+
+#ifdef CONFIG_VIDEO_V4L1
+#include <linux/videodev.h>
+#endif
+#include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
+#include <linux/video_decoder.h>
+
+#define dbgarg(cmd, fmt, arg...) \
+                do {                                                    \
+                    if (vfd->debug & V4L2_DEBUG_IOCTL_ARG) {            \
+                        printk(KERN_DEBUG "%s: ",  vfd->name);          \
+                        v4l_printk_ioctl(cmd);                          \
+                        printk(" " fmt,  ## arg);                       \
+                    }                                                   \
+                } while (0)
+
+#define dbgarg2(fmt, arg...) \
+                do {                                                    \
+                    if (vfd->debug & V4L2_DEBUG_IOCTL_ARG)              \
+                        printk(KERN_DEBUG "%s: " fmt, vfd->name, ## arg);\
+                } while (0)
+
+struct std_descr {
+        v4l2_std_id std;
+        const char *descr;
+};
+
+static const struct std_descr standards[] = {
+        { V4L2_STD_NTSC,        "NTSC"      },
+        { V4L2_STD_NTSC_M,      "NTSC-M"    },
+        { V4L2_STD_NTSC_M_JP,   "NTSC-M-JP" },
+        { V4L2_STD_NTSC_M_KR,   "NTSC-M-KR" },
+        { V4L2_STD_NTSC_443,    "NTSC-443"  },
+        { V4L2_STD_PAL,         "PAL"       },
+        { V4L2_STD_PAL_BG,      "PAL-BG"    },
+        { V4L2_STD_PAL_B,       "PAL-B"     },
+        { V4L2_STD_PAL_B1,      "PAL-B1"    },
+        { V4L2_STD_PAL_G,       "PAL-G"     },
+        { V4L2_STD_PAL_H,       "PAL-H"     },
+        { V4L2_STD_PAL_I,       "PAL-I"     },
+        { V4L2_STD_PAL_DK,      "PAL-DK"    },
+        { V4L2_STD_PAL_D,       "PAL-D"     },
+        { V4L2_STD_PAL_D1,      "PAL-D1"    },
+        { V4L2_STD_PAL_K,       "PAL-K"     },
+        { V4L2_STD_PAL_M,       "PAL-M"     },
+        { V4L2_STD_PAL_N,       "PAL-N"     },
+        { V4L2_STD_PAL_Nc,      "PAL-Nc"    },
+        { V4L2_STD_PAL_60,      "PAL-60"    },
+        { V4L2_STD_SECAM,       "SECAM"     },
+        { V4L2_STD_SECAM_B,     "SECAM-B"   },
+        { V4L2_STD_SECAM_G,     "SECAM-G"   },
+        { V4L2_STD_SECAM_H,     "SECAM-H"   },
+        { V4L2_STD_SECAM_DK,    "SECAM-DK"  },
+        { V4L2_STD_SECAM_D,     "SECAM-D"   },
+        { V4L2_STD_SECAM_K,     "SECAM-K"   },
+        { V4L2_STD_SECAM_K1,    "SECAM-K1"  },
+        { V4L2_STD_SECAM_L,     "SECAM-L"   },
+        { V4L2_STD_SECAM_LC,    "SECAM-Lc"  },
+        { 0,                    "Unknown"   }
+};
+
+/* video4linux standard ID conversion to standard name
+ */
+const char *v4l2_norm_to_name(v4l2_std_id id)
+{
+        u32 myid = id;
+        int i;
+
+        /* HACK: ppc32 architecture doesn't have __ucmpdi2 function to handle
+           64 bit comparations. So, on that architecture, with some gcc
+           variants, compilation fails. Currently, the max value is 30bit wide.
+         */
+        BUG_ON(myid != id);
+
+        for (i = 0; standards[i].std; i++)
+                if (myid == standards[i].std)
+                        break;
+        return standards[i].descr;
+}
+EXPORT_SYMBOL(v4l2_norm_to_name);
+
+/* Fill in the fields of a v4l2_standard structure according to the
+   'id' and 'transmission' parameters.  Returns negative on error.  */
+int v4l2_video_std_construct(struct v4l2_standard *vs,
+                             int id, const char *name)
+{
+        u32 index = vs->index;
+
+        memset(vs, 0, sizeof(struct v4l2_standard));
+        vs->index = index;
+        vs->id    = id;
+        if (id & V4L2_STD_525_60) {
+                vs->frameperiod.numerator = 1001;
+                vs->frameperiod.denominator = 30000;
+                vs->framelines = 525;
+        } else {
+                vs->frameperiod.numerator = 1;
+                vs->frameperiod.denominator = 25;
+                vs->framelines = 625;
+        }
+        strlcpy(vs->name, name, sizeof(vs->name));
+        return 0;
+}
+EXPORT_SYMBOL(v4l2_video_std_construct);
+
+/* ----------------------------------------------------------------- */
+/* some arrays for pretty-printing debug messages of enum types      */
+
+const char *v4l2_field_names[] = {
+        [V4L2_FIELD_ANY]        = "any",
+        [V4L2_FIELD_NONE]       = "none",
+        [V4L2_FIELD_TOP]        = "top",
+        [V4L2_FIELD_BOTTOM]     = "bottom",
+        [V4L2_FIELD_INTERLACED] = "interlaced",
+        [V4L2_FIELD_SEQ_TB]     = "seq-tb",
+        [V4L2_FIELD_SEQ_BT]     = "seq-bt",
+        [V4L2_FIELD_ALTERNATE]  = "alternate",
+        [V4L2_FIELD_INTERLACED_TB] = "interlaced-tb",
+        [V4L2_FIELD_INTERLACED_BT] = "interlaced-bt",
+};
+EXPORT_SYMBOL(v4l2_field_names);
+
+const char *v4l2_type_names[] = {
+        [V4L2_BUF_TYPE_VIDEO_CAPTURE]      = "vid-cap",
+        [V4L2_BUF_TYPE_VIDEO_OVERLAY]      = "vid-overlay",
+        [V4L2_BUF_TYPE_VIDEO_OUTPUT]       = "vid-out",
+        [V4L2_BUF_TYPE_VBI_CAPTURE]        = "vbi-cap",
+        [V4L2_BUF_TYPE_VBI_OUTPUT]         = "vbi-out",
+        [V4L2_BUF_TYPE_SLICED_VBI_CAPTURE] = "sliced-vbi-cap",
+        [V4L2_BUF_TYPE_SLICED_VBI_OUTPUT]  = "sliced-vbi-out",
+        [V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY] = "vid-out-overlay",
+};
+EXPORT_SYMBOL(v4l2_type_names);
+
+static const char *v4l2_memory_names[] = {
+        [V4L2_MEMORY_MMAP]    = "mmap",
+        [V4L2_MEMORY_USERPTR] = "userptr",
+        [V4L2_MEMORY_OVERLAY] = "overlay",
+};
+
+#define prt_names(a, arr) ((((a) >= 0) && ((a) < ARRAY_SIZE(arr))) ? \
+                           arr[a] : "unknown")
+
+/* ------------------------------------------------------------------ */
+/* debug help functions                                               */
+
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
+static const char *v4l1_ioctls[] = {
+        [_IOC_NR(VIDIOCGCAP)]       = "VIDIOCGCAP",
+        [_IOC_NR(VIDIOCGCHAN)]      = "VIDIOCGCHAN",
+        [_IOC_NR(VIDIOCSCHAN)]      = "VIDIOCSCHAN",
+        [_IOC_NR(VIDIOCGTUNER)]     = "VIDIOCGTUNER",
+        [_IOC_NR(VIDIOCSTUNER)]     = "VIDIOCSTUNER",
+        [_IOC_NR(VIDIOCGPICT)]      = "VIDIOCGPICT",
+        [_IOC_NR(VIDIOCSPICT)]      = "VIDIOCSPICT",
+        [_IOC_NR(VIDIOCCAPTURE)]    = "VIDIOCCAPTURE",
+        [_IOC_NR(VIDIOCGWIN)]       = "VIDIOCGWIN",
+        [_IOC_NR(VIDIOCSWIN)]       = "VIDIOCSWIN",
+        [_IOC_NR(VIDIOCGFBUF)]      = "VIDIOCGFBUF",
+        [_IOC_NR(VIDIOCSFBUF)]      = "VIDIOCSFBUF",
+        [_IOC_NR(VIDIOCKEY)]        = "VIDIOCKEY",
+        [_IOC_NR(VIDIOCGFREQ)]      = "VIDIOCGFREQ",
+        [_IOC_NR(VIDIOCSFREQ)]      = "VIDIOCSFREQ",
+        [_IOC_NR(VIDIOCGAUDIO)]     = "VIDIOCGAUDIO",
+        [_IOC_NR(VIDIOCSAUDIO)]     = "VIDIOCSAUDIO",
+        [_IOC_NR(VIDIOCSYNC)]       = "VIDIOCSYNC",
+        [_IOC_NR(VIDIOCMCAPTURE)]   = "VIDIOCMCAPTURE",
+        [_IOC_NR(VIDIOCGMBUF)]      = "VIDIOCGMBUF",
+        [_IOC_NR(VIDIOCGUNIT)]      = "VIDIOCGUNIT",
+        [_IOC_NR(VIDIOCGCAPTURE)]   = "VIDIOCGCAPTURE",
+        [_IOC_NR(VIDIOCSCAPTURE)]   = "VIDIOCSCAPTURE",
+        [_IOC_NR(VIDIOCSPLAYMODE)]  = "VIDIOCSPLAYMODE",
+        [_IOC_NR(VIDIOCSWRITEMODE)] = "VIDIOCSWRITEMODE",
+        [_IOC_NR(VIDIOCGPLAYINFO)]  = "VIDIOCGPLAYINFO",
+        [_IOC_NR(VIDIOCSMICROCODE)] = "VIDIOCSMICROCODE",
+        [_IOC_NR(VIDIOCGVBIFMT)]    = "VIDIOCGVBIFMT",
+        [_IOC_NR(VIDIOCSVBIFMT)]    = "VIDIOCSVBIFMT"
+};
+#define V4L1_IOCTLS ARRAY_SIZE(v4l1_ioctls)
+#endif
+
+static const char *v4l2_ioctls[] = {
+        [_IOC_NR(VIDIOC_QUERYCAP)]         = "VIDIOC_QUERYCAP",
+        [_IOC_NR(VIDIOC_RESERVED)]         = "VIDIOC_RESERVED",
+        [_IOC_NR(VIDIOC_ENUM_FMT)]         = "VIDIOC_ENUM_FMT",
+        [_IOC_NR(VIDIOC_G_FMT)]            = "VIDIOC_G_FMT",
+        [_IOC_NR(VIDIOC_S_FMT)]            = "VIDIOC_S_FMT",
+        [_IOC_NR(VIDIOC_REQBUFS)]          = "VIDIOC_REQBUFS",
+        [_IOC_NR(VIDIOC_QUERYBUF)]         = "VIDIOC_QUERYBUF",
+        [_IOC_NR(VIDIOC_G_FBUF)]           = "VIDIOC_G_FBUF",
+        [_IOC_NR(VIDIOC_S_FBUF)]           = "VIDIOC_S_FBUF",
+        [_IOC_NR(VIDIOC_OVERLAY)]          = "VIDIOC_OVERLAY",
+        [_IOC_NR(VIDIOC_QBUF)]             = "VIDIOC_QBUF",
+        [_IOC_NR(VIDIOC_DQBUF)]            = "VIDIOC_DQBUF",
+        [_IOC_NR(VIDIOC_STREAMON)]         = "VIDIOC_STREAMON",
+        [_IOC_NR(VIDIOC_STREAMOFF)]        = "VIDIOC_STREAMOFF",
+        [_IOC_NR(VIDIOC_G_PARM)]           = "VIDIOC_G_PARM",
+        [_IOC_NR(VIDIOC_S_PARM)]           = "VIDIOC_S_PARM",
+        [_IOC_NR(VIDIOC_G_STD)]            = "VIDIOC_G_STD",
+        [_IOC_NR(VIDIOC_S_STD)]            = "VIDIOC_S_STD",
+        [_IOC_NR(VIDIOC_ENUMSTD)]          = "VIDIOC_ENUMSTD",
+        [_IOC_NR(VIDIOC_ENUMINPUT)]        = "VIDIOC_ENUMINPUT",
+        [_IOC_NR(VIDIOC_G_CTRL)]           = "VIDIOC_G_CTRL",
+        [_IOC_NR(VIDIOC_S_CTRL)]           = "VIDIOC_S_CTRL",
+        [_IOC_NR(VIDIOC_G_TUNER)]          = "VIDIOC_G_TUNER",
+        [_IOC_NR(VIDIOC_S_TUNER)]          = "VIDIOC_S_TUNER",
+        [_IOC_NR(VIDIOC_G_AUDIO)]          = "VIDIOC_G_AUDIO",
+        [_IOC_NR(VIDIOC_S_AUDIO)]          = "VIDIOC_S_AUDIO",
+        [_IOC_NR(VIDIOC_QUERYCTRL)]        = "VIDIOC_QUERYCTRL",
+        [_IOC_NR(VIDIOC_QUERYMENU)]        = "VIDIOC_QUERYMENU",
+        [_IOC_NR(VIDIOC_G_INPUT)]          = "VIDIOC_G_INPUT",
+        [_IOC_NR(VIDIOC_S_INPUT)]          = "VIDIOC_S_INPUT",
+        [_IOC_NR(VIDIOC_G_OUTPUT)]         = "VIDIOC_G_OUTPUT",
+        [_IOC_NR(VIDIOC_S_OUTPUT)]         = "VIDIOC_S_OUTPUT",
+        [_IOC_NR(VIDIOC_ENUMOUTPUT)]       = "VIDIOC_ENUMOUTPUT",
+        [_IOC_NR(VIDIOC_G_AUDOUT)]         = "VIDIOC_G_AUDOUT",
+        [_IOC_NR(VIDIOC_S_AUDOUT)]         = "VIDIOC_S_AUDOUT",
+        [_IOC_NR(VIDIOC_G_MODULATOR)]      = "VIDIOC_G_MODULATOR",
+        [_IOC_NR(VIDIOC_S_MODULATOR)]      = "VIDIOC_S_MODULATOR",
+        [_IOC_NR(VIDIOC_G_FREQUENCY)]      = "VIDIOC_G_FREQUENCY",
+        [_IOC_NR(VIDIOC_S_FREQUENCY)]      = "VIDIOC_S_FREQUENCY",
+        [_IOC_NR(VIDIOC_CROPCAP)]          = "VIDIOC_CROPCAP",
+        [_IOC_NR(VIDIOC_G_CROP)]           = "VIDIOC_G_CROP",
+        [_IOC_NR(VIDIOC_S_CROP)]           = "VIDIOC_S_CROP",
+        [_IOC_NR(VIDIOC_G_JPEGCOMP)]       = "VIDIOC_G_JPEGCOMP",
+        [_IOC_NR(VIDIOC_S_JPEGCOMP)]       = "VIDIOC_S_JPEGCOMP",
+        [_IOC_NR(VIDIOC_QUERYSTD)]         = "VIDIOC_QUERYSTD",
+        [_IOC_NR(VIDIOC_TRY_FMT)]          = "VIDIOC_TRY_FMT",
+        [_IOC_NR(VIDIOC_ENUMAUDIO)]        = "VIDIOC_ENUMAUDIO",
+        [_IOC_NR(VIDIOC_ENUMAUDOUT)]       = "VIDIOC_ENUMAUDOUT",
+        [_IOC_NR(VIDIOC_G_PRIORITY)]       = "VIDIOC_G_PRIORITY",
+        [_IOC_NR(VIDIOC_S_PRIORITY)]       = "VIDIOC_S_PRIORITY",
+        [_IOC_NR(VIDIOC_G_SLICED_VBI_CAP)] = "VIDIOC_G_SLICED_VBI_CAP",
+        [_IOC_NR(VIDIOC_LOG_STATUS)]       = "VIDIOC_LOG_STATUS",
+        [_IOC_NR(VIDIOC_G_EXT_CTRLS)]      = "VIDIOC_G_EXT_CTRLS",
+        [_IOC_NR(VIDIOC_S_EXT_CTRLS)]      = "VIDIOC_S_EXT_CTRLS",
+        [_IOC_NR(VIDIOC_TRY_EXT_CTRLS)]    = "VIDIOC_TRY_EXT_CTRLS",
+#if 1
+        [_IOC_NR(VIDIOC_ENUM_FRAMESIZES)]  = "VIDIOC_ENUM_FRAMESIZES",
+        [_IOC_NR(VIDIOC_ENUM_FRAMEINTERVALS)] = "VIDIOC_ENUM_FRAMEINTERVALS",
+        [_IOC_NR(VIDIOC_G_ENC_INDEX)]      = "VIDIOC_G_ENC_INDEX",
+        [_IOC_NR(VIDIOC_ENCODER_CMD)]      = "VIDIOC_ENCODER_CMD",
+        [_IOC_NR(VIDIOC_TRY_ENCODER_CMD)]  = "VIDIOC_TRY_ENCODER_CMD",
+
+        [_IOC_NR(VIDIOC_DBG_S_REGISTER)]   = "VIDIOC_DBG_S_REGISTER",
+        [_IOC_NR(VIDIOC_DBG_G_REGISTER)]   = "VIDIOC_DBG_G_REGISTER",
+
+        [_IOC_NR(VIDIOC_G_CHIP_IDENT)]     = "VIDIOC_G_CHIP_IDENT",
+        [_IOC_NR(VIDIOC_S_HW_FREQ_SEEK)]   = "VIDIOC_S_HW_FREQ_SEEK",
+#endif
+};
+#define V4L2_IOCTLS ARRAY_SIZE(v4l2_ioctls)
+
+static const char *v4l2_int_ioctls[] = {
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
+        [_IOC_NR(DECODER_GET_CAPABILITIES)]    = "DECODER_GET_CAPABILITIES",
+        [_IOC_NR(DECODER_GET_STATUS)]          = "DECODER_GET_STATUS",
+        [_IOC_NR(DECODER_SET_NORM)]            = "DECODER_SET_NORM",
+        [_IOC_NR(DECODER_SET_INPUT)]           = "DECODER_SET_INPUT",
+        [_IOC_NR(DECODER_SET_OUTPUT)]          = "DECODER_SET_OUTPUT",
+        [_IOC_NR(DECODER_ENABLE_OUTPUT)]       = "DECODER_ENABLE_OUTPUT",
+        [_IOC_NR(DECODER_SET_PICTURE)]         = "DECODER_SET_PICTURE",
+        [_IOC_NR(DECODER_SET_GPIO)]            = "DECODER_SET_GPIO",
+        [_IOC_NR(DECODER_INIT)]                = "DECODER_INIT",
+        [_IOC_NR(DECODER_SET_VBI_BYPASS)]      = "DECODER_SET_VBI_BYPASS",
+        [_IOC_NR(DECODER_DUMP)]                = "DECODER_DUMP",
+#endif
+        [_IOC_NR(AUDC_SET_RADIO)]              = "AUDC_SET_RADIO",
+
+        [_IOC_NR(TUNER_SET_TYPE_ADDR)]         = "TUNER_SET_TYPE_ADDR",
+        [_IOC_NR(TUNER_SET_STANDBY)]           = "TUNER_SET_STANDBY",
+        [_IOC_NR(TUNER_SET_CONFIG)]            = "TUNER_SET_CONFIG",
+
+        [_IOC_NR(VIDIOC_INT_S_TUNER_MODE)]     = "VIDIOC_INT_S_TUNER_MODE",
+        [_IOC_NR(VIDIOC_INT_RESET)]            = "VIDIOC_INT_RESET",
+        [_IOC_NR(VIDIOC_INT_AUDIO_CLOCK_FREQ)] = "VIDIOC_INT_AUDIO_CLOCK_FREQ",
+        [_IOC_NR(VIDIOC_INT_DECODE_VBI_LINE)]  = "VIDIOC_INT_DECODE_VBI_LINE",
+        [_IOC_NR(VIDIOC_INT_S_VBI_DATA)]       = "VIDIOC_INT_S_VBI_DATA",
+        [_IOC_NR(VIDIOC_INT_G_VBI_DATA)]       = "VIDIOC_INT_G_VBI_DATA",
+        [_IOC_NR(VIDIOC_INT_I2S_CLOCK_FREQ)]   = "VIDIOC_INT_I2S_CLOCK_FREQ",
+        [_IOC_NR(VIDIOC_INT_S_STANDBY)]        = "VIDIOC_INT_S_STANDBY",
+        [_IOC_NR(VIDIOC_INT_S_AUDIO_ROUTING)]  = "VIDIOC_INT_S_AUDIO_ROUTING",
+        [_IOC_NR(VIDIOC_INT_G_AUDIO_ROUTING)]  = "VIDIOC_INT_G_AUDIO_ROUTING",
+        [_IOC_NR(VIDIOC_INT_S_VIDEO_ROUTING)]  = "VIDIOC_INT_S_VIDEO_ROUTING",
+        [_IOC_NR(VIDIOC_INT_G_VIDEO_ROUTING)]  = "VIDIOC_INT_G_VIDEO_ROUTING",
+        [_IOC_NR(VIDIOC_INT_S_CRYSTAL_FREQ)]   = "VIDIOC_INT_S_CRYSTAL_FREQ",
+        [_IOC_NR(VIDIOC_INT_INIT)]             = "VIDIOC_INT_INIT",
+        [_IOC_NR(VIDIOC_INT_G_STD_OUTPUT)]     = "VIDIOC_INT_G_STD_OUTPUT",
+        [_IOC_NR(VIDIOC_INT_S_STD_OUTPUT)]     = "VIDIOC_INT_S_STD_OUTPUT",
+};
+#define V4L2_INT_IOCTLS ARRAY_SIZE(v4l2_int_ioctls)
+
+/* Common ioctl debug function. This function can be used by
+   external ioctl messages as well as internal V4L ioctl */
+void v4l_printk_ioctl(unsigned int cmd)
+{
+        char *dir, *type;
+
+        switch (_IOC_TYPE(cmd)) {
+        case 'd':
+                if (_IOC_NR(cmd) >= V4L2_INT_IOCTLS) {
+                        type = "v4l2_int";
+                        break;
+                }
+                printk("%s", v4l2_int_ioctls[_IOC_NR(cmd)]);
+                return;
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
+        case 'v':
+                if (_IOC_NR(cmd) >= V4L1_IOCTLS) {
+                        type = "v4l1";
+                        break;
+                }
+                printk("%s", v4l1_ioctls[_IOC_NR(cmd)]);
+                return;
+#endif
+        case 'V':
+                if (_IOC_NR(cmd) >= V4L2_IOCTLS) {
+                        type = "v4l2";
+                        break;
+                }
+                printk("%s", v4l2_ioctls[_IOC_NR(cmd)]);
+                return;
+        default:
+                type = "unknown";
+        }
+
+        switch (_IOC_DIR(cmd)) {
+        case _IOC_NONE:              dir = "--"; break;
+        case _IOC_READ:              dir = "r-"; break;
+        case _IOC_WRITE:             dir = "-w"; break;
+        case _IOC_READ | _IOC_WRITE: dir = "rw"; break;
+        default:                     dir = "*ERR*"; break;
+        }
+        printk("%s ioctl '%c', dir=%s, #%d (0x%08x)",
+                type, _IOC_TYPE(cmd), dir, _IOC_NR(cmd), cmd);
+}
+EXPORT_SYMBOL(v4l_printk_ioctl);
+
+/*
+ * helper function -- handles userspace copying for ioctl arguments
+ */
+
+#ifdef __OLD_VIDIOC_
+static unsigned int
+video_fix_command(unsigned int cmd)
+{
+        switch (cmd) {
+        case VIDIOC_OVERLAY_OLD:
+                cmd = VIDIOC_OVERLAY;
+                break;
+        case VIDIOC_S_PARM_OLD:
+                cmd = VIDIOC_S_PARM;
+                break;
+        case VIDIOC_S_CTRL_OLD:
+                cmd = VIDIOC_S_CTRL;
+                break;
+        case VIDIOC_G_AUDIO_OLD:
+                cmd = VIDIOC_G_AUDIO;
+                break;
+        case VIDIOC_G_AUDOUT_OLD:
+                cmd = VIDIOC_G_AUDOUT;
+                break;
+        case VIDIOC_CROPCAP_OLD:
+                cmd = VIDIOC_CROPCAP;
+                break;
+        }
+        return cmd;
+}
+#endif
+
+/*
+ * Obsolete usercopy function - Should be removed soon
+ */
+int
+video_usercopy(struct inode *inode, struct file *file,
+               unsigned int cmd, unsigned long arg,
+               int (*func)(struct inode *inode, struct file *file,
+                           unsigned int cmd, void *arg))
+{
+        char    sbuf[128];
+        void    *mbuf = NULL;
+        void    *parg = NULL;
+        int     err  = -EINVAL;
+        int     is_ext_ctrl;
+        size_t  ctrls_size = 0;
+        void __user *user_ptr = NULL;
+
+#ifdef __OLD_VIDIOC_
+        cmd = video_fix_command(cmd);
+#endif
+        is_ext_ctrl = (cmd == VIDIOC_S_EXT_CTRLS || cmd == VIDIOC_G_EXT_CTRLS ||
+                       cmd == VIDIOC_TRY_EXT_CTRLS);
+
+        /*  Copy arguments into temp kernel buffer  */
+        switch (_IOC_DIR(cmd)) {
+        case _IOC_NONE:
+                parg = NULL;
+                break;
+        case _IOC_READ:
+        case _IOC_WRITE:
+        case (_IOC_WRITE | _IOC_READ):
+                if (_IOC_SIZE(cmd) <= sizeof(sbuf)) {
+                        parg = sbuf;
+                } else {
+                        /* too big to allocate from stack */
+                        mbuf = kmalloc(_IOC_SIZE(cmd), GFP_KERNEL);
+                        if (NULL == mbuf)
+                                return -ENOMEM;
+                        parg = mbuf;
+                }
+
+                err = -EFAULT;
+                if (_IOC_DIR(cmd) & _IOC_WRITE)
+                        if (copy_from_user(parg, (void __user *)arg, _IOC_SIZE(cmd)))
+                                goto out;
+                break;
+        }
+        if (is_ext_ctrl) {
+                struct v4l2_ext_controls *p = parg;
+
+                /* In case of an error, tell the caller that it wasn't
+                   a specific control that caused it. */
+                p->error_idx = p->count;
+                user_ptr = (void __user *)p->controls;
+                if (p->count) {
+                        ctrls_size = sizeof(struct v4l2_ext_control) * p->count;
+                        /* Note: v4l2_ext_controls fits in sbuf[] so mbuf is still NULL. */
+                        mbuf = kmalloc(ctrls_size, GFP_KERNEL);
+                        err = -ENOMEM;
+                        if (NULL == mbuf)
+                                goto out_ext_ctrl;
+                        err = -EFAULT;
+                        if (copy_from_user(mbuf, user_ptr, ctrls_size))
+                                goto out_ext_ctrl;
+                        p->controls = mbuf;
+                }
+        }
+
+        /* call driver */
+        err = func(inode, file, cmd, parg);
+        if (err == -ENOIOCTLCMD)
+                err = -EINVAL;
+        if (is_ext_ctrl) {
+                struct v4l2_ext_controls *p = parg;
+
+                p->controls = (void *)user_ptr;
+                if (p->count && err == 0 && copy_to_user(user_ptr, mbuf, ctrls_size))
+                        err = -EFAULT;
+                goto out_ext_ctrl;
+        }
+        if (err < 0)
+                goto out;
+
+out_ext_ctrl:
+        /*  Copy results into user buffer  */
+        switch (_IOC_DIR(cmd)) {
+        case _IOC_READ:
+        case (_IOC_WRITE | _IOC_READ):
+                if (copy_to_user((void __user *)arg, parg, _IOC_SIZE(cmd)))
+                        err = -EFAULT;
+                break;
+        }
+
+out:
+        kfree(mbuf);
+        return err;
+}
+EXPORT_SYMBOL(video_usercopy);
+
+static void dbgbuf(unsigned int cmd, struct video_device *vfd,
+                                        struct v4l2_buffer *p)
+{
+        struct v4l2_timecode *tc = &p->timecode;
+
+        dbgarg(cmd, "%02ld:%02d:%02d.%08ld index=%d, type=%s, "
+                "bytesused=%d, flags=0x%08d, "
+                "field=%0d, sequence=%d, memory=%s, offset/userptr=0x%08lx, length=%d\n",
+                        p->timestamp.tv_sec / 3600,
+                        (int)(p->timestamp.tv_sec / 60) % 60,
+                        (int)(p->timestamp.tv_sec % 60),
+                        p->timestamp.tv_usec,
+                        p->index,
+                        prt_names(p->type, v4l2_type_names),
+                        p->bytesused, p->flags,
+                        p->field, p->sequence,
+                        prt_names(p->memory, v4l2_memory_names),
+                        p->m.userptr, p->length);
+        dbgarg2("timecode=%02d:%02d:%02d type=%d, "
+                "flags=0x%08d, frames=%d, userbits=0x%08x\n",
+                        tc->hours, tc->minutes, tc->seconds,
+                        tc->type, tc->flags, tc->frames, *(__u32 *)tc->userbits);
+}
+
+static inline void dbgrect(struct video_device *vfd, char *s,
+                                                        struct v4l2_rect *r)
+{
+        dbgarg2("%sRect start at %dx%d, size=%dx%d\n", s, r->left, r->top,
+                                                r->width, r->height);
+};
+
+static inline void v4l_print_pix_fmt(struct video_device *vfd,
+                                                struct v4l2_pix_format *fmt)
+{
+        dbgarg2("width=%d, height=%d, format=%c%c%c%c, field=%s, "
+                "bytesperline=%d sizeimage=%d, colorspace=%d\n",
+                fmt->width, fmt->height,
+                (fmt->pixelformat & 0xff),
+                (fmt->pixelformat >>  8) & 0xff,
+                (fmt->pixelformat >> 16) & 0xff,
+                (fmt->pixelformat >> 24) & 0xff,
+                prt_names(fmt->field, v4l2_field_names),
+                fmt->bytesperline, fmt->sizeimage, fmt->colorspace);
+};
+
+static inline void v4l_print_ext_ctrls(unsigned int cmd,
+        struct video_device *vfd, struct v4l2_ext_controls *c, int show_vals)
+{
+        __u32 i;
+
+        if (!(vfd->debug & V4L2_DEBUG_IOCTL_ARG))
+                return;
+        dbgarg(cmd, "");
+        printk(KERN_CONT "class=0x%x", c->ctrl_class);
+        for (i = 0; i < c->count; i++) {
+                if (show_vals)
+                        printk(KERN_CONT " id/val=0x%x/0x%x",
+                                c->controls[i].id, c->controls[i].value);
+                else
+                        printk(KERN_CONT " id=0x%x", c->controls[i].id);
+        }
+        printk(KERN_CONT "\n");
+};
+
+static inline int check_ext_ctrls(struct v4l2_ext_controls *c, int allow_priv)
+{
+        __u32 i;
+
+        /* zero the reserved fields */
+        c->reserved[0] = c->reserved[1] = 0;
+        for (i = 0; i < c->count; i++) {
+                c->controls[i].reserved2[0] = 0;
+                c->controls[i].reserved2[1] = 0;
+        }
+        /* V4L2_CID_PRIVATE_BASE cannot be used as control class
+           when using extended controls.
+           Only when passed in through VIDIOC_G_CTRL and VIDIOC_S_CTRL
+           is it allowed for backwards compatibility.
+         */
+        if (!allow_priv && c->ctrl_class == V4L2_CID_PRIVATE_BASE)
+                return 0;
+        /* Check that all controls are from the same control class. */
+        for (i = 0; i < c->count; i++) {
+                if (V4L2_CTRL_ID2CLASS(c->controls[i].id) != c->ctrl_class) {
+                        c->error_idx = i;
+                        return 0;
+                }
+        }
+        return 1;
+}
+
+static int check_fmt(const struct v4l2_ioctl_ops *ops, enum v4l2_buf_type type)
+{
+        if (ops == NULL)
+                return -EINVAL;
+
+        switch (type) {
+        case V4L2_BUF_TYPE_VIDEO_CAPTURE:
+                if (ops->vidioc_try_fmt_vid_cap)
+                        return 0;
+                break;
+        case V4L2_BUF_TYPE_VIDEO_OVERLAY:
+                if (ops->vidioc_try_fmt_vid_overlay)
+                        return 0;
+                break;
+        case V4L2_BUF_TYPE_VIDEO_OUTPUT:
+                if (ops->vidioc_try_fmt_vid_out)
+                        return 0;
+                break;
+        case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY:
+                if (ops->vidioc_try_fmt_vid_out_overlay)
+                        return 0;
+                break;
+        case V4L2_BUF_TYPE_VBI_CAPTURE:
+                if (ops->vidioc_try_fmt_vbi_cap)
+                        return 0;
+                break;
+        case V4L2_BUF_TYPE_VBI_OUTPUT:
+                if (ops->vidioc_try_fmt_vbi_out)
+                        return 0;
+                break;
+        case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE:
+                if (ops->vidioc_try_fmt_sliced_vbi_cap)
+                        return 0;
+                break;
+        case V4L2_BUF_TYPE_SLICED_VBI_OUTPUT:
+                if (ops->vidioc_try_fmt_sliced_vbi_out)
+                        return 0;
+                break;
+        case V4L2_BUF_TYPE_PRIVATE:
+                if (ops->vidioc_try_fmt_type_private)
+                        return 0;
+                break;
+        }
+        return -EINVAL;
+}
+
+static int __video_do_ioctl(struct inode *inode, struct file *file,
+                unsigned int cmd, void *arg)
+{
+        struct video_device *vfd = video_devdata(file);
+        const struct v4l2_ioctl_ops *ops = vfd->ioctl_ops;
+        void                 *fh = file->private_data;
+        int                  ret = -EINVAL;
+
+        if ((vfd->debug & V4L2_DEBUG_IOCTL) &&
+                                !(vfd->debug & V4L2_DEBUG_IOCTL_ARG)) {
+                v4l_print_ioctl(vfd->name, cmd);
+                printk(KERN_CONT "\n");
+        }
+
+        if (ops == NULL) {
+                printk(KERN_WARNING "videodev: \"%s\" has no ioctl_ops.\n",
+                                vfd->name);
+                return -EINVAL;
+        }
+
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
+        /***********************************************************
+         Handles calls to the obsoleted V4L1 API
+         Due to the nature of VIDIOCGMBUF, each driver that supports
+         V4L1 should implement its own handler for this ioctl.
+         ***********************************************************/
+
+        /* --- streaming capture ------------------------------------- */
+        if (cmd == VIDIOCGMBUF) {
+                struct video_mbuf *p = arg;
+
+                memset(p, 0, sizeof(*p));
+
+                if (!ops->vidiocgmbuf)
+                        return ret;
+                ret = ops->vidiocgmbuf(file, fh, p);
+                if (!ret)
+                        dbgarg(cmd, "size=%d, frames=%d, offsets=0x%08lx\n",
+                                                p->size, p->frames,
+                                                (unsigned long)p->offsets);
+                return ret;
+        }
+
+        /********************************************************
+         All other V4L1 calls are handled by v4l1_compat module.
+         Those calls will be translated into V4L2 calls, and
+         __video_do_ioctl will be called again, with one or more
+         V4L2 ioctls.
+         ********************************************************/
+        if (_IOC_TYPE(cmd) == 'v')
+                return v4l_compat_translate_ioctl(inode, file, cmd, arg,
+                                                __video_do_ioctl);
+#endif
+
+        switch (cmd) {
+        /* --- capabilities ------------------------------------------ */
+        case VIDIOC_QUERYCAP:
+        {
+                struct v4l2_capability *cap = (struct v4l2_capability *)arg;
+                memset(cap, 0, sizeof(*cap));
+
+                if (!ops->vidioc_querycap)
+                        break;
+
+                ret = ops->vidioc_querycap(file, fh, cap);
+                if (!ret)
+                        dbgarg(cmd, "driver=%s, card=%s, bus=%s, "
+                                        "version=0x%08x, "
+                                        "capabilities=0x%08x\n",
+                                        cap->driver, cap->card, cap->bus_info,
+                                        cap->version,
+                                        cap->capabilities);
+                break;
+        }
+
+        /* --- priority ------------------------------------------ */
+        case VIDIOC_G_PRIORITY:
+        {
+                enum v4l2_priority *p = arg;
+
+                if (!ops->vidioc_g_priority)
+                        break;
+                ret = ops->vidioc_g_priority(file, fh, p);
+                if (!ret)
+                        dbgarg(cmd, "priority is %d\n", *p);
+                break;
+        }
+        case VIDIOC_S_PRIORITY:
+        {
+                enum v4l2_priority *p = arg;
+
+                if (!ops->vidioc_s_priority)
+                        break;
+                dbgarg(cmd, "setting priority to %d\n", *p);
+                ret = ops->vidioc_s_priority(file, fh, *p);
+                break;
+        }
+
+        /* --- capture ioctls ---------------------------------------- */
+        case VIDIOC_ENUM_FMT:
+        {
+                struct v4l2_fmtdesc *f = arg;
+                enum v4l2_buf_type type;
+                unsigned int index;
+
+                index = f->index;
+                type  = f->type;
+                memset(f, 0, sizeof(*f));
+                f->index = index;
+                f->type  = type;
+
+                switch (type) {
+                case V4L2_BUF_TYPE_VIDEO_CAPTURE:
+                        if (ops->vidioc_enum_fmt_vid_cap)
+                                ret = ops->vidioc_enum_fmt_vid_cap(file, fh, f);
+                        break;
+                case V4L2_BUF_TYPE_VIDEO_OVERLAY:
+                        if (ops->vidioc_enum_fmt_vid_overlay)
+                                ret = ops->vidioc_enum_fmt_vid_overlay(file,
+                                        fh, f);
+                        break;
+#if 1
+                /* V4L2_BUF_TYPE_VBI_CAPTURE should not support VIDIOC_ENUM_FMT
+                 * according to the spec. The bttv and saa7134 drivers support
+                 * it though, so just warn that this is deprecated and will be
+                 * removed in the near future. */
+                case V4L2_BUF_TYPE_VBI_CAPTURE:
+                        if (ops->vidioc_enum_fmt_vbi_cap) {
+                                printk(KERN_WARNING "vidioc_enum_fmt_vbi_cap will be removed in 2.6.28!\n");
+                                ret = ops->vidioc_enum_fmt_vbi_cap(file, fh, f);
+                        }
+                        break;
+#endif
+                case V4L2_BUF_TYPE_VIDEO_OUTPUT:
+                        if (ops->vidioc_enum_fmt_vid_out)
+                                ret = ops->vidioc_enum_fmt_vid_out(file, fh, f);
+                        break;
+                case V4L2_BUF_TYPE_PRIVATE:
+                        if (ops->vidioc_enum_fmt_type_private)
+                                ret = ops->vidioc_enum_fmt_type_private(file,
+                                                                fh, f);
+                        break;
+                default:
+                        break;
+                }
+                if (!ret)
+                        dbgarg(cmd, "index=%d, type=%d, flags=%d, "
+                                "pixelformat=%c%c%c%c, description='%s'\n",
+                                f->index, f->type, f->flags,
+                                (f->pixelformat & 0xff),
+                                (f->pixelformat >>  8) & 0xff,
+                                (f->pixelformat >> 16) & 0xff,
+                                (f->pixelformat >> 24) & 0xff,
+                                f->description);
+                break;
+        }
+        case VIDIOC_G_FMT:
+        {
+                struct v4l2_format *f = (struct v4l2_format *)arg;
+
+                memset(f->fmt.raw_data, 0, sizeof(f->fmt.raw_data));
+
+                /* FIXME: Should be one dump per type */
+                dbgarg(cmd, "type=%s\n", prt_names(f->type, v4l2_type_names));
+
+                switch (f->type) {
+                case V4L2_BUF_TYPE_VIDEO_CAPTURE:
+                        if (ops->vidioc_g_fmt_vid_cap)
+                                ret = ops->vidioc_g_fmt_vid_cap(file, fh, f);
+                        if (!ret)
+                                v4l_print_pix_fmt(vfd, &f->fmt.pix);
+                        break;
+                case V4L2_BUF_TYPE_VIDEO_OVERLAY:
+                        if (ops->vidioc_g_fmt_vid_overlay)
+                                ret = ops->vidioc_g_fmt_vid_overlay(file,
+                                                                    fh, f);
+                        break;
+                case V4L2_BUF_TYPE_VIDEO_OUTPUT:
+                        if (ops->vidioc_g_fmt_vid_out)
+                                ret = ops->vidioc_g_fmt_vid_out(file, fh, f);
+                        if (!ret)
+                                v4l_print_pix_fmt(vfd, &f->fmt.pix);
+                        break;
+                case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY:
+                        if (ops->vidioc_g_fmt_vid_out_overlay)
+                                ret = ops->vidioc_g_fmt_vid_out_overlay(file,
+                                       fh, f);
+                        break;
+                case V4L2_BUF_TYPE_VBI_CAPTURE:
+                        if (ops->vidioc_g_fmt_vbi_cap)
+                                ret = ops->vidioc_g_fmt_vbi_cap(file, fh, f);
+                        break;
+                case V4L2_BUF_TYPE_VBI_OUTPUT:
+                        if (ops->vidioc_g_fmt_vbi_out)
+                                ret = ops->vidioc_g_fmt_vbi_out(file, fh, f);
+                        break;
+                case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE:
+                        if (ops->vidioc_g_fmt_sliced_vbi_cap)
+                                ret = ops->vidioc_g_fmt_sliced_vbi_cap(file,
+                                                                        fh, f);
+                        break;
+                case V4L2_BUF_TYPE_SLICED_VBI_OUTPUT:
+                        if (ops->vidioc_g_fmt_sliced_vbi_out)
+                                ret = ops->vidioc_g_fmt_sliced_vbi_out(file,
+                                                                        fh, f);
+                        break;
+                case V4L2_BUF_TYPE_PRIVATE:
+                        if (ops->vidioc_g_fmt_type_private)
+                                ret = ops->vidioc_g_fmt_type_private(file,
+                                                                fh, f);
+                        break;
+                }
+
+                break;
+        }
+        case VIDIOC_S_FMT:
+        {
+                struct v4l2_format *f = (struct v4l2_format *)arg;
+
+                /* FIXME: Should be one dump per type */
+                dbgarg(cmd, "type=%s\n", prt_names(f->type, v4l2_type_names));
+
+                switch (f->type) {
+                case V4L2_BUF_TYPE_VIDEO_CAPTURE:
+                        v4l_print_pix_fmt(vfd, &f->fmt.pix);
+                        if (ops->vidioc_s_fmt_vid_cap)
+                                ret = ops->vidioc_s_fmt_vid_cap(file, fh, f);
+                        break;
+                case V4L2_BUF_TYPE_VIDEO_OVERLAY:
+                        if (ops->vidioc_s_fmt_vid_overlay)
+                                ret = ops->vidioc_s_fmt_vid_overlay(file,
+                                                                    fh, f);
+                        break;
+                case V4L2_BUF_TYPE_VIDEO_OUTPUT:
+                        v4l_print_pix_fmt(vfd, &f->fmt.pix);
+                        if (ops->vidioc_s_fmt_vid_out)
+                                ret = ops->vidioc_s_fmt_vid_out(file, fh, f);
+                        break;
+                case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY:
+                        if (ops->vidioc_s_fmt_vid_out_overlay)
+                                ret = ops->vidioc_s_fmt_vid_out_overlay(file,
+                                        fh, f);
+                        break;
+                case V4L2_BUF_TYPE_VBI_CAPTURE:
+                        if (ops->vidioc_s_fmt_vbi_cap)
+                                ret = ops->vidioc_s_fmt_vbi_cap(file, fh, f);
+                        break;
+                case V4L2_BUF_TYPE_VBI_OUTPUT:
+                        if (ops->vidioc_s_fmt_vbi_out)
+                                ret = ops->vidioc_s_fmt_vbi_out(file, fh, f);
+                        break;
+                case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE:
+                        if (ops->vidioc_s_fmt_sliced_vbi_cap)
+                                ret = ops->vidioc_s_fmt_sliced_vbi_cap(file,
+                                                                        fh, f);
+                        break;
+                case V4L2_BUF_TYPE_SLICED_VBI_OUTPUT:
+                        if (ops->vidioc_s_fmt_sliced_vbi_out)
+                                ret = ops->vidioc_s_fmt_sliced_vbi_out(file,
+                                                                        fh, f);
+                        break;
+                case V4L2_BUF_TYPE_PRIVATE:
+                        if (ops->vidioc_s_fmt_type_private)
+                                ret = ops->vidioc_s_fmt_type_private(file,
+                                                                fh, f);
+                        break;
+                }
+                break;
+        }
+        case VIDIOC_TRY_FMT:
+        {
+                struct v4l2_format *f = (struct v4l2_format *)arg;
+
+                /* FIXME: Should be one dump per type */
+                dbgarg(cmd, "type=%s\n", prt_names(f->type,
+                                                v4l2_type_names));
+                switch (f->type) {
+                case V4L2_BUF_TYPE_VIDEO_CAPTURE:
+                        if (ops->vidioc_try_fmt_vid_cap)
+                                ret = ops->vidioc_try_fmt_vid_cap(file, fh, f);
+                        if (!ret)
+                                v4l_print_pix_fmt(vfd, &f->fmt.pix);
+                        break;
+                case V4L2_BUF_TYPE_VIDEO_OVERLAY:
+                        if (ops->vidioc_try_fmt_vid_overlay)
+                                ret = ops->vidioc_try_fmt_vid_overlay(file,
+                                        fh, f);
+                        break;
+                case V4L2_BUF_TYPE_VIDEO_OUTPUT:
+                        if (ops->vidioc_try_fmt_vid_out)
+                                ret = ops->vidioc_try_fmt_vid_out(file, fh, f);
+                        if (!ret)
+                                v4l_print_pix_fmt(vfd, &f->fmt.pix);
+                        break;
+                case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY:
+                        if (ops->vidioc_try_fmt_vid_out_overlay)
+                                ret = ops->vidioc_try_fmt_vid_out_overlay(file,
+                                       fh, f);
+                        break;
+                case V4L2_BUF_TYPE_VBI_CAPTURE:
+                        if (ops->vidioc_try_fmt_vbi_cap)
+                                ret = ops->vidioc_try_fmt_vbi_cap(file, fh, f);
+                        break;
+                case V4L2_BUF_TYPE_VBI_OUTPUT:
+                        if (ops->vidioc_try_fmt_vbi_out)
+                                ret = ops->vidioc_try_fmt_vbi_out(file, fh, f);
+                        break;
+                case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE:
+                        if (ops->vidioc_try_fmt_sliced_vbi_cap)
+                                ret = ops->vidioc_try_fmt_sliced_vbi_cap(file,
+                                                                fh, f);
+                        break;
+                case V4L2_BUF_TYPE_SLICED_VBI_OUTPUT:
+                        if (ops->vidioc_try_fmt_sliced_vbi_out)
+                                ret = ops->vidioc_try_fmt_sliced_vbi_out(file,
+                                                                fh, f);
+                        break;
+                case V4L2_BUF_TYPE_PRIVATE:
+                        if (ops->vidioc_try_fmt_type_private)
+                                ret = ops->vidioc_try_fmt_type_private(file,
+                                                                fh, f);
+                        break;
+                }
+
+                break;
+        }
+        /* FIXME: Those buf reqs could be handled here,
+           with some changes on videobuf to allow its header to be included at
+           videodev2.h or being merged at videodev2.
+         */
+        case VIDIOC_REQBUFS:
+        {
+                struct v4l2_requestbuffers *p = arg;
+
+                if (!ops->vidioc_reqbufs)
+                        break;
+                ret = check_fmt(ops, p->type);
+                if (ret)
+                        break;
+
+                ret = ops->vidioc_reqbufs(file, fh, p);
+                dbgarg(cmd, "count=%d, type=%s, memory=%s\n",
+                                p->count,
+                                prt_names(p->type, v4l2_type_names),
+                                prt_names(p->memory, v4l2_memory_names));
+                break;
+        }
+        case VIDIOC_QUERYBUF:
+        {
+                struct v4l2_buffer *p = arg;
+
+                if (!ops->vidioc_querybuf)
+                        break;
+                ret = check_fmt(ops, p->type);
+                if (ret)
+                        break;
+
+                ret = ops->vidioc_querybuf(file, fh, p);
+                if (!ret)
+                        dbgbuf(cmd, vfd, p);
+                break;
+        }
+        case VIDIOC_QBUF:
+        {
+                struct v4l2_buffer *p = arg;
+
+                if (!ops->vidioc_qbuf)
+                        break;
+                ret = check_fmt(ops, p->type);
+                if (ret)
+                        break;
+
+                ret = ops->vidioc_qbuf(file, fh, p);
+                if (!ret)
+                        dbgbuf(cmd, vfd, p);
+                break;
+        }
+        case VIDIOC_DQBUF:
+        {
+                struct v4l2_buffer *p = arg;
+
+                if (!ops->vidioc_dqbuf)
+                        break;
+                ret = check_fmt(ops, p->type);
+                if (ret)
+                        break;
+
+                ret = ops->vidioc_dqbuf(file, fh, p);
+                if (!ret)
+                        dbgbuf(cmd, vfd, p);
+                break;
+        }
+        case VIDIOC_OVERLAY:
+        {
+                int *i = arg;
+
+                if (!ops->vidioc_overlay)
+                        break;
+                dbgarg(cmd, "value=%d\n", *i);
+                ret = ops->vidioc_overlay(file, fh, *i);
+                break;
+        }
+        case VIDIOC_G_FBUF:
+        {
+                struct v4l2_framebuffer *p = arg;
+
+                if (!ops->vidioc_g_fbuf)
+                        break;
+                ret = ops->vidioc_g_fbuf(file, fh, arg);
+                if (!ret) {
+                        dbgarg(cmd, "capability=0x%x, flags=%d, base=0x%08lx\n",
+                                        p->capability, p->flags,
+                                        (unsigned long)p->base);
+                        v4l_print_pix_fmt(vfd, &p->fmt);
+                }
+                break;
+        }
+        case VIDIOC_S_FBUF:
+        {
+                struct v4l2_framebuffer *p = arg;
+
+                if (!ops->vidioc_s_fbuf)
+                        break;
+                dbgarg(cmd, "capability=0x%x, flags=%d, base=0x%08lx\n",
+                        p->capability, p->flags, (unsigned long)p->base);
+                v4l_print_pix_fmt(vfd, &p->fmt);
+                ret = ops->vidioc_s_fbuf(file, fh, arg);
+                break;
+        }
+        case VIDIOC_STREAMON:
+        {
+                enum v4l2_buf_type i = *(int *)arg;
+
+                if (!ops->vidioc_streamon)
+                        break;
+                dbgarg(cmd, "type=%s\n", prt_names(i, v4l2_type_names));
+                ret = ops->vidioc_streamon(file, fh, i);
+                break;
+        }
+        case VIDIOC_STREAMOFF:
+        {
+                enum v4l2_buf_type i = *(int *)arg;
+
+                if (!ops->vidioc_streamoff)
+                        break;
+                dbgarg(cmd, "type=%s\n", prt_names(i, v4l2_type_names));
+                ret = ops->vidioc_streamoff(file, fh, i);
+                break;
+        }
+        /* ---------- tv norms ---------- */
+        case VIDIOC_ENUMSTD:
+        {
+                struct v4l2_standard *p = arg;
+                v4l2_std_id id = vfd->tvnorms, curr_id = 0;
+                unsigned int index = p->index, i, j = 0;
+                const char *descr = "";
+
+                /* Return norm array in a canonical way */
+                for (i = 0; i <= index && id; i++) {
+                        /* last std value in the standards array is 0, so this
+                           while always ends there since (id & 0) == 0. */
+                        while ((id & standards[j].std) != standards[j].std)
+                                j++;
+                        curr_id = standards[j].std;
+                        descr = standards[j].descr;
+                        j++;
+                        if (curr_id == 0)
+                                break;
+                        if (curr_id != V4L2_STD_PAL &&
+                            curr_id != V4L2_STD_SECAM &&
+                            curr_id != V4L2_STD_NTSC)
+                                id &= ~curr_id;
+                }
+                if (i <= index)
+                        return -EINVAL;
+
+                v4l2_video_std_construct(p, curr_id, descr);
+                p->index = index;
+
+                dbgarg(cmd, "index=%d, id=0x%Lx, name=%s, fps=%d/%d, "
+                                "framelines=%d\n", p->index,
+                                (unsigned long long)p->id, p->name,
+                                p->frameperiod.numerator,
+                                p->frameperiod.denominator,
+                                p->framelines);
+
+                ret = 0;
+                break;
+        }
+        case VIDIOC_G_STD:
+        {
+                v4l2_std_id *id = arg;
+
+                ret = 0;
+                /* Calls the specific handler */
+                if (ops->vidioc_g_std)
+                        ret = ops->vidioc_g_std(file, fh, id);
+                else
+                        *id = vfd->current_norm;
+
+                if (!ret)
+                        dbgarg(cmd, "std=0x%08Lx\n", (long long unsigned)*id);
+                break;
+        }
+        case VIDIOC_S_STD:
+        {
+                v4l2_std_id *id = arg, norm;
+
+                dbgarg(cmd, "std=%08Lx\n", (long long unsigned)*id);
+
+                norm = (*id) & vfd->tvnorms;
+                if (vfd->tvnorms && !norm)      /* Check if std is supported */
+                        break;
+
+                /* Calls the specific handler */
+                if (ops->vidioc_s_std)
+                        ret = ops->vidioc_s_std(file, fh, &norm);
+                else
+                        ret = -EINVAL;
+
+                /* Updates standard information */
+                if (ret >= 0)
+                        vfd->current_norm = norm;
+                break;
+        }
+        case VIDIOC_QUERYSTD:
+        {
+                v4l2_std_id *p = arg;
+
+                if (!ops->vidioc_querystd)
+                        break;
+                ret = ops->vidioc_querystd(file, fh, arg);
+                if (!ret)
+                        dbgarg(cmd, "detected std=%08Lx\n",
+                                                (unsigned long long)*p);
+                break;
+        }
+        /* ------ input switching ---------- */
+        /* FIXME: Inputs can be handled inside videodev2 */
+        case VIDIOC_ENUMINPUT:
+        {
+                struct v4l2_input *p = arg;
+                int i = p->index;
+
+                if (!ops->vidioc_enum_input)
+                        break;
+                memset(p, 0, sizeof(*p));
+                p->index = i;
+
+                ret = ops->vidioc_enum_input(file, fh, p);
+                if (!ret)
+                        dbgarg(cmd, "index=%d, name=%s, type=%d, "
+                                "audioset=%d, "
+                                "tuner=%d, std=%08Lx, status=%d\n",
+                                p->index, p->name, p->type, p->audioset,
+                                p->tuner,
+                                (unsigned long long)p->std,
+                                p->status);
+                break;
+        }
+        case VIDIOC_G_INPUT:
+        {
+                unsigned int *i = arg;
+
+                if (!ops->vidioc_g_input)
+                        break;
+                ret = ops->vidioc_g_input(file, fh, i);
+                if (!ret)
+                        dbgarg(cmd, "value=%d\n", *i);
+                break;
+        }
+        case VIDIOC_S_INPUT:
+        {
+                unsigned int *i = arg;
+
+                if (!ops->vidioc_s_input)
+                        break;
+                dbgarg(cmd, "value=%d\n", *i);
+                ret = ops->vidioc_s_input(file, fh, *i);
+                break;
+        }
+
+        /* ------ output switching ---------- */
+        case VIDIOC_ENUMOUTPUT:
+        {
+                struct v4l2_output *p = arg;
+                int i = p->index;
+
+                if (!ops->vidioc_enum_output)
+                        break;
+                memset(p, 0, sizeof(*p));
+                p->index = i;
+
+                ret = ops->vidioc_enum_output(file, fh, p);
+                if (!ret)
+                        dbgarg(cmd, "index=%d, name=%s, type=%d, "
+                                "audioset=0x%x, "
+                                "modulator=%d, std=0x%08Lx\n",
+                                p->index, p->name, p->type, p->audioset,
+                                p->modulator, (unsigned long long)p->std);
+                break;
+        }
+        case VIDIOC_G_OUTPUT:
+        {
+                unsigned int *i = arg;
+
+                if (!ops->vidioc_g_output)
+                        break;
+                ret = ops->vidioc_g_output(file, fh, i);
+                if (!ret)
+                        dbgarg(cmd, "value=%d\n", *i);
+                break;
+        }
+        case VIDIOC_S_OUTPUT:
+        {
+                unsigned int *i = arg;
+
+                if (!ops->vidioc_s_output)
+                        break;
+                dbgarg(cmd, "value=%d\n", *i);
+                ret = ops->vidioc_s_output(file, fh, *i);
+                break;
+        }
+
+        /* --- controls ---------------------------------------------- */
+        case VIDIOC_QUERYCTRL:
+        {
+                struct v4l2_queryctrl *p = arg;
+
+                if (!ops->vidioc_queryctrl)
+                        break;
+                ret = ops->vidioc_queryctrl(file, fh, p);
+                if (!ret)
+                        dbgarg(cmd, "id=0x%x, type=%d, name=%s, min/max=%d/%d, "
+                                        "step=%d, default=%d, flags=0x%08x\n",
+                                        p->id, p->type, p->name,
+                                        p->minimum, p->maximum,
+                                        p->step, p->default_value, p->flags);
+                else
+                        dbgarg(cmd, "id=0x%x\n", p->id);
+                break;
+        }
+        case VIDIOC_G_CTRL:
+        {
+                struct v4l2_control *p = arg;
+
+                if (ops->vidioc_g_ctrl)
+                        ret = ops->vidioc_g_ctrl(file, fh, p);
+                else if (ops->vidioc_g_ext_ctrls) {
+                        struct v4l2_ext_controls ctrls;
+                        struct v4l2_ext_control ctrl;
+
+                        ctrls.ctrl_class = V4L2_CTRL_ID2CLASS(p->id);
+                        ctrls.count = 1;
+                        ctrls.controls = &ctrl;
+                        ctrl.id = p->id;
+                        ctrl.value = p->value;
+                        if (check_ext_ctrls(&ctrls, 1)) {
+                                ret = ops->vidioc_g_ext_ctrls(file, fh, &ctrls);
+                                if (ret == 0)
+                                        p->value = ctrl.value;
+                        }
+                } else
+                        break;
+                if (!ret)
+                        dbgarg(cmd, "id=0x%x, value=%d\n", p->id, p->value);
+                else
+                        dbgarg(cmd, "id=0x%x\n", p->id);
+                break;
+        }
+        case VIDIOC_S_CTRL:
+        {
+                struct v4l2_control *p = arg;
+                struct v4l2_ext_controls ctrls;
+                struct v4l2_ext_control ctrl;
+
+                if (!ops->vidioc_s_ctrl && !ops->vidioc_s_ext_ctrls)
+                        break;
+
+                dbgarg(cmd, "id=0x%x, value=%d\n", p->id, p->value);
+
+                if (ops->vidioc_s_ctrl) {
+                        ret = ops->vidioc_s_ctrl(file, fh, p);
+                        break;
+                }
+                if (!ops->vidioc_s_ext_ctrls)
+                        break;
+
+                ctrls.ctrl_class = V4L2_CTRL_ID2CLASS(p->id);
+                ctrls.count = 1;
+                ctrls.controls = &ctrl;
+                ctrl.id = p->id;
+                ctrl.value = p->value;
+                if (check_ext_ctrls(&ctrls, 1))
+                        ret = ops->vidioc_s_ext_ctrls(file, fh, &ctrls);
+                break;
+        }
+        case VIDIOC_G_EXT_CTRLS:
+        {
+                struct v4l2_ext_controls *p = arg;
+
+                p->error_idx = p->count;
+                if (!ops->vidioc_g_ext_ctrls)
+                        break;
+                if (check_ext_ctrls(p, 0))
+                        ret = ops->vidioc_g_ext_ctrls(file, fh, p);
+                v4l_print_ext_ctrls(cmd, vfd, p, !ret);
+                break;
+        }
+        case VIDIOC_S_EXT_CTRLS:
+        {
+                struct v4l2_ext_controls *p = arg;
+
+                p->error_idx = p->count;
+                if (!ops->vidioc_s_ext_ctrls)
+                        break;
+                v4l_print_ext_ctrls(cmd, vfd, p, 1);
+                if (check_ext_ctrls(p, 0))
+                        ret = ops->vidioc_s_ext_ctrls(file, fh, p);
+                break;
+        }
+        case VIDIOC_TRY_EXT_CTRLS:
+        {
+                struct v4l2_ext_controls *p = arg;
+
+                p->error_idx = p->count;
+                if (!ops->vidioc_try_ext_ctrls)
+                        break;
+                v4l_print_ext_ctrls(cmd, vfd, p, 1);
+                if (check_ext_ctrls(p, 0))
+                        ret = ops->vidioc_try_ext_ctrls(file, fh, p);
+                break;
+        }
+        case VIDIOC_QUERYMENU:
+        {
+                struct v4l2_querymenu *p = arg;
+
+                if (!ops->vidioc_querymenu)
+                        break;
+                ret = ops->vidioc_querymenu(file, fh, p);
+                if (!ret)
+                        dbgarg(cmd, "id=0x%x, index=%d, name=%s\n",
+                                p->id, p->index, p->name);
+                else
+                        dbgarg(cmd, "id=0x%x, index=%d\n",
+                                p->id, p->index);
+                break;
+        }
+        /* --- audio ---------------------------------------------- */
+        case VIDIOC_ENUMAUDIO:
+        {
+                struct v4l2_audio *p = arg;
+
+                if (!ops->vidioc_enumaudio)
+                        break;
+                ret = ops->vidioc_enumaudio(file, fh, p);
+                if (!ret)
+                        dbgarg(cmd, "index=%d, name=%s, capability=0x%x, "
+                                        "mode=0x%x\n", p->index, p->name,
+                                        p->capability, p->mode);
+                else
+                        dbgarg(cmd, "index=%d\n", p->index);
+                break;
+        }
+        case VIDIOC_G_AUDIO:
+        {
+                struct v4l2_audio *p = arg;
+                __u32 index = p->index;
+
+                if (!ops->vidioc_g_audio)
+                        break;
+
+                memset(p, 0, sizeof(*p));
+                p->index = index;
+                ret = ops->vidioc_g_audio(file, fh, p);
+                if (!ret)
+                        dbgarg(cmd, "index=%d, name=%s, capability=0x%x, "
+                                        "mode=0x%x\n", p->index,
+                                        p->name, p->capability, p->mode);
+                else
+                        dbgarg(cmd, "index=%d\n", p->index);
+                break;
+        }
+        case VIDIOC_S_AUDIO:
+        {
+                struct v4l2_audio *p = arg;
+
+                if (!ops->vidioc_s_audio)
+                        break;
+                dbgarg(cmd, "index=%d, name=%s, capability=0x%x, "
+                                        "mode=0x%x\n", p->index, p->name,
+                                        p->capability, p->mode);
+                ret = ops->vidioc_s_audio(file, fh, p);
+                break;
+        }
+        case VIDIOC_ENUMAUDOUT:
+        {
+                struct v4l2_audioout *p = arg;
+
+                if (!ops->vidioc_enumaudout)
+                        break;
+                dbgarg(cmd, "Enum for index=%d\n", p->index);
+                ret = ops->vidioc_enumaudout(file, fh, p);
+                if (!ret)
+                        dbgarg2("index=%d, name=%s, capability=%d, "
+                                        "mode=%d\n", p->index, p->name,
+                                        p->capability, p->mode);
+                break;
+        }
+        case VIDIOC_G_AUDOUT:
+        {
+                struct v4l2_audioout *p = arg;
+
+                if (!ops->vidioc_g_audout)
+                        break;
+                dbgarg(cmd, "Enum for index=%d\n", p->index);
+                ret = ops->vidioc_g_audout(file, fh, p);
+                if (!ret)
+                        dbgarg2("index=%d, name=%s, capability=%d, "
+                                        "mode=%d\n", p->index, p->name,
+                                        p->capability, p->mode);
+                break;
+        }
+        case VIDIOC_S_AUDOUT:
+        {
+                struct v4l2_audioout *p = arg;
+
+                if (!ops->vidioc_s_audout)
+                        break;
+                dbgarg(cmd, "index=%d, name=%s, capability=%d, "
+                                        "mode=%d\n", p->index, p->name,
+                                        p->capability, p->mode);
+
+                ret = ops->vidioc_s_audout(file, fh, p);
+                break;
+        }
+        case VIDIOC_G_MODULATOR:
+        {
+                struct v4l2_modulator *p = arg;
+
+                if (!ops->vidioc_g_modulator)
+                        break;
+                ret = ops->vidioc_g_modulator(file, fh, p);
+                if (!ret)
+                        dbgarg(cmd, "index=%d, name=%s, "
+                                        "capability=%d, rangelow=%d,"
+                                        " rangehigh=%d, txsubchans=%d\n",
+                                        p->index, p->name, p->capability,
+                                        p->rangelow, p->rangehigh,
+                                        p->txsubchans);
+                break;
+        }
+        case VIDIOC_S_MODULATOR:
+        {
+                struct v4l2_modulator *p = arg;
+
+                if (!ops->vidioc_s_modulator)
+                        break;
+                dbgarg(cmd, "index=%d, name=%s, capability=%d, "
+                                "rangelow=%d, rangehigh=%d, txsubchans=%d\n",
+                                p->index, p->name, p->capability, p->rangelow,
+                                p->rangehigh, p->txsubchans);
+                        ret = ops->vidioc_s_modulator(file, fh, p);
+                break;
+        }
+        case VIDIOC_G_CROP:
+        {
+                struct v4l2_crop *p = arg;
+
+                if (!ops->vidioc_g_crop)
+                        break;
+                dbgarg(cmd, "type=%s\n", prt_names(p->type, v4l2_type_names));
+                ret = ops->vidioc_g_crop(file, fh, p);
+                if (!ret)
+                        dbgrect(vfd, "", &p->c);
+                break;
+        }
+        case VIDIOC_S_CROP:
+        {
+                struct v4l2_crop *p = arg;
+
+                if (!ops->vidioc_s_crop)
+                        break;
+                dbgarg(cmd, "type=%s\n", prt_names(p->type, v4l2_type_names));
+                dbgrect(vfd, "", &p->c);
+                ret = ops->vidioc_s_crop(file, fh, p);
+                break;
+        }
+        case VIDIOC_CROPCAP:
+        {
+                struct v4l2_cropcap *p = arg;
+
+                /*FIXME: Should also show v4l2_fract pixelaspect */
+                if (!ops->vidioc_cropcap)
+                        break;
+                dbgarg(cmd, "type=%s\n", prt_names(p->type, v4l2_type_names));
+                ret = ops->vidioc_cropcap(file, fh, p);
+                if (!ret) {
+                        dbgrect(vfd, "bounds ", &p->bounds);
+                        dbgrect(vfd, "defrect ", &p->defrect);
+                }
+                break;
+        }
+        case VIDIOC_G_JPEGCOMP:
+        {
+                struct v4l2_jpegcompression *p = arg;
+
+                if (!ops->vidioc_g_jpegcomp)
+                        break;
+                ret = ops->vidioc_g_jpegcomp(file, fh, p);
+                if (!ret)
+                        dbgarg(cmd, "quality=%d, APPn=%d, "
+                                        "APP_len=%d, COM_len=%d, "
+                                        "jpeg_markers=%d\n",
+                                        p->quality, p->APPn, p->APP_len,
+                                        p->COM_len, p->jpeg_markers);
+                break;
+        }
+        case VIDIOC_S_JPEGCOMP:
+        {
+                struct v4l2_jpegcompression *p = arg;
+
+                if (!ops->vidioc_g_jpegcomp)
+                        break;
+                dbgarg(cmd, "quality=%d, APPn=%d, APP_len=%d, "
+                                        "COM_len=%d, jpeg_markers=%d\n",
+                                        p->quality, p->APPn, p->APP_len,
+                                        p->COM_len, p->jpeg_markers);
+                        ret = ops->vidioc_s_jpegcomp(file, fh, p);
+                break;
+        }
+        case VIDIOC_G_ENC_INDEX:
+        {
+                struct v4l2_enc_idx *p = arg;
+
+                if (!ops->vidioc_g_enc_index)
+                        break;
+                ret = ops->vidioc_g_enc_index(file, fh, p);
+                if (!ret)
+                        dbgarg(cmd, "entries=%d, entries_cap=%d\n",
+                                        p->entries, p->entries_cap);
+                break;
+        }
+        case VIDIOC_ENCODER_CMD:
+        {
+                struct v4l2_encoder_cmd *p = arg;
+
+                if (!ops->vidioc_encoder_cmd)
+                        break;
+                memset(&p->raw, 0, sizeof(p->raw));
+                ret = ops->vidioc_encoder_cmd(file, fh, p);
+                if (!ret)
+                        dbgarg(cmd, "cmd=%d, flags=%x\n", p->cmd, p->flags);
+                break;
+        }
+        case VIDIOC_TRY_ENCODER_CMD:
+        {
+                struct v4l2_encoder_cmd *p = arg;
+
+                if (!ops->vidioc_try_encoder_cmd)
+                        break;
+                memset(&p->raw, 0, sizeof(p->raw));
+                ret = ops->vidioc_try_encoder_cmd(file, fh, p);
+                if (!ret)
+                        dbgarg(cmd, "cmd=%d, flags=%x\n", p->cmd, p->flags);
+                break;
+        }
+        case VIDIOC_G_PARM:
+        {
+                struct v4l2_streamparm *p = arg;
+                __u32 type = p->type;
+
+                memset(p, 0, sizeof(*p));
+                p->type = type;
+
+                if (ops->vidioc_g_parm) {
+                        ret = ops->vidioc_g_parm(file, fh, p);
+                } else {
+                        struct v4l2_standard s;
+
+                        if (p->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+                                return -EINVAL;
+
+                        v4l2_video_std_construct(&s, vfd->current_norm,
+                                                 v4l2_norm_to_name(vfd->current_norm));
+
+                        p->parm.capture.timeperframe = s.frameperiod;
+                        ret = 0;
+                }
+
+                dbgarg(cmd, "type=%d\n", p->type);
+                break;
+        }
+        case VIDIOC_S_PARM:
+        {
+                struct v4l2_streamparm *p = arg;
+
+                if (!ops->vidioc_s_parm)
+                        break;
+                dbgarg(cmd, "type=%d\n", p->type);
+                ret = ops->vidioc_s_parm(file, fh, p);
+                break;
+        }
+        case VIDIOC_G_TUNER:
+        {
+                struct v4l2_tuner *p = arg;
+                __u32 index = p->index;
+
+                if (!ops->vidioc_g_tuner)
+                        break;
+
+                memset(p, 0, sizeof(*p));
+                p->index = index;
+
+                ret = ops->vidioc_g_tuner(file, fh, p);
+                if (!ret)
+                        dbgarg(cmd, "index=%d, name=%s, type=%d, "
+                                        "capability=0x%x, rangelow=%d, "
+                                        "rangehigh=%d, signal=%d, afc=%d, "
+                                        "rxsubchans=0x%x, audmode=%d\n",
+                                        p->index, p->name, p->type,
+                                        p->capability, p->rangelow,
+                                        p->rangehigh, p->signal, p->afc,
+                                        p->rxsubchans, p->audmode);
+                break;
+        }
+        case VIDIOC_S_TUNER:
+        {
+                struct v4l2_tuner *p = arg;
+
+                if (!ops->vidioc_s_tuner)
+                        break;
+                dbgarg(cmd, "index=%d, name=%s, type=%d, "
+                                "capability=0x%x, rangelow=%d, "
+                                "rangehigh=%d, signal=%d, afc=%d, "
+                                "rxsubchans=0x%x, audmode=%d\n",
+                                p->index, p->name, p->type,
+                                p->capability, p->rangelow,
+                                p->rangehigh, p->signal, p->afc,
+                                p->rxsubchans, p->audmode);
+                ret = ops->vidioc_s_tuner(file, fh, p);
+                break;
+        }
+        case VIDIOC_G_FREQUENCY:
+        {
+                struct v4l2_frequency *p = arg;
+
+                if (!ops->vidioc_g_frequency)
+                        break;
+
+                memset(p->reserved, 0, sizeof(p->reserved));
+
+                ret = ops->vidioc_g_frequency(file, fh, p);
+                if (!ret)
+                        dbgarg(cmd, "tuner=%d, type=%d, frequency=%d\n",
+                                        p->tuner, p->type, p->frequency);
+                break;
+        }
+        case VIDIOC_S_FREQUENCY:
+        {
+                struct v4l2_frequency *p = arg;
+
+                if (!ops->vidioc_s_frequency)
+                        break;
+                dbgarg(cmd, "tuner=%d, type=%d, frequency=%d\n",
+                                p->tuner, p->type, p->frequency);
+                ret = ops->vidioc_s_frequency(file, fh, p);
+                break;
+        }
+        case VIDIOC_G_SLICED_VBI_CAP:
+        {
+                struct v4l2_sliced_vbi_cap *p = arg;
+                __u32 type = p->type;
+
+                if (!ops->vidioc_g_sliced_vbi_cap)
+                        break;
+                memset(p, 0, sizeof(*p));
+                p->type = type;
+                dbgarg(cmd, "type=%s\n", prt_names(p->type, v4l2_type_names));
+                ret = ops->vidioc_g_sliced_vbi_cap(file, fh, p);
+                if (!ret)
+                        dbgarg2("service_set=%d\n", p->service_set);
+                break;
+        }
+        case VIDIOC_LOG_STATUS:
+        {
+                if (!ops->vidioc_log_status)
+                        break;
+                ret = ops->vidioc_log_status(file, fh);
+                break;
+        }
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+        case VIDIOC_DBG_G_REGISTER:
+        {
+                struct v4l2_register *p = arg;
+
+                if (!capable(CAP_SYS_ADMIN))
+                        ret = -EPERM;
+                else if (ops->vidioc_g_register)
+                        ret = ops->vidioc_g_register(file, fh, p);
+                break;
+        }
+        case VIDIOC_DBG_S_REGISTER:
+        {
+                struct v4l2_register *p = arg;
+
+                if (!capable(CAP_SYS_ADMIN))
+                        ret = -EPERM;
+                else if (ops->vidioc_s_register)
+                        ret = ops->vidioc_s_register(file, fh, p);
+                break;
+        }
+#endif
+        case VIDIOC_G_CHIP_IDENT:
+        {
+                struct v4l2_chip_ident *p = arg;
+
+                if (!ops->vidioc_g_chip_ident)
+                        break;
+                ret = ops->vidioc_g_chip_ident(file, fh, p);
+                if (!ret)
+                        dbgarg(cmd, "chip_ident=%u, revision=0x%x\n", p->ident, p->revision);
+                break;
+        }
+        case VIDIOC_S_HW_FREQ_SEEK:
+        {
+                struct v4l2_hw_freq_seek *p = arg;
+
+                if (!ops->vidioc_s_hw_freq_seek)
+                        break;
+                dbgarg(cmd,
+                        "tuner=%d, type=%d, seek_upward=%d, wrap_around=%d\n",
+                        p->tuner, p->type, p->seek_upward, p->wrap_around);
+                ret = ops->vidioc_s_hw_freq_seek(file, fh, p);
+                break;
+        }
+        default:
+        {
+                if (!ops->vidioc_default)
+                        break;
+                ret = ops->vidioc_default(file, fh, cmd, arg);
+                break;
+        }
+        } /* switch */
+
+        if (vfd->debug & V4L2_DEBUG_IOCTL_ARG) {
+                if (ret < 0) {
+                        v4l_print_ioctl(vfd->name, cmd);
+                        printk(KERN_CONT " error %d\n", ret);
+                }
+        }
+
+        return ret;
+}
+
+int video_ioctl2(struct inode *inode, struct file *file,
+               unsigned int cmd, unsigned long arg)
+{
+        char    sbuf[128];
+        void    *mbuf = NULL;
+        void    *parg = NULL;
+        int     err  = -EINVAL;
+        int     is_ext_ctrl;
+        size_t  ctrls_size = 0;
+        void __user *user_ptr = NULL;
+
+#ifdef __OLD_VIDIOC_
+        cmd = video_fix_command(cmd);
+#endif
+        is_ext_ctrl = (cmd == VIDIOC_S_EXT_CTRLS || cmd == VIDIOC_G_EXT_CTRLS ||
+                       cmd == VIDIOC_TRY_EXT_CTRLS);
+
+        /*  Copy arguments into temp kernel buffer  */
+        switch (_IOC_DIR(cmd)) {
+        case _IOC_NONE:
+                parg = NULL;
+                break;
+        case _IOC_READ:
+        case _IOC_WRITE:
+        case (_IOC_WRITE | _IOC_READ):
+                if (_IOC_SIZE(cmd) <= sizeof(sbuf)) {
+                        parg = sbuf;
+                } else {
+                        /* too big to allocate from stack */
+                        mbuf = kmalloc(_IOC_SIZE(cmd), GFP_KERNEL);
+                        if (NULL == mbuf)
+                                return -ENOMEM;
+                        parg = mbuf;
+                }
+
+                err = -EFAULT;
+                if (_IOC_DIR(cmd) & _IOC_WRITE)
+                        if (copy_from_user(parg, (void __user *)arg, _IOC_SIZE(cmd)))
+                                goto out;
+                break;
+        }
+
+        if (is_ext_ctrl) {
+                struct v4l2_ext_controls *p = parg;
+
+                /* In case of an error, tell the caller that it wasn't
+                   a specific control that caused it. */
+                p->error_idx = p->count;
+                user_ptr = (void __user *)p->controls;
+                if (p->count) {
+                        ctrls_size = sizeof(struct v4l2_ext_control) * p->count;
+                        /* Note: v4l2_ext_controls fits in sbuf[] so mbuf is still NULL. */
+                        mbuf = kmalloc(ctrls_size, GFP_KERNEL);
+                        err = -ENOMEM;
+                        if (NULL == mbuf)
+                                goto out_ext_ctrl;
+                        err = -EFAULT;
+                        if (copy_from_user(mbuf, user_ptr, ctrls_size))
+                                goto out_ext_ctrl;
+                        p->controls = mbuf;
+                }
+        }
+
+        /* Handles IOCTL */
+        err = __video_do_ioctl(inode, file, cmd, parg);
+        if (err == -ENOIOCTLCMD)
+                err = -EINVAL;
+        if (is_ext_ctrl) {
+                struct v4l2_ext_controls *p = parg;
+
+                p->controls = (void *)user_ptr;
+                if (p->count && err == 0 && copy_to_user(user_ptr, mbuf, ctrls_size))
+                        err = -EFAULT;
+                goto out_ext_ctrl;
+        }
+        if (err < 0)
+                goto out;
+
+out_ext_ctrl:
+        /*  Copy results into user buffer  */
+        switch (_IOC_DIR(cmd)) {
+        case _IOC_READ:
+        case (_IOC_WRITE | _IOC_READ):
+                if (copy_to_user((void __user *)arg, parg, _IOC_SIZE(cmd)))
+                        err = -EFAULT;
+                break;
+        }
+
+out:
+        kfree(mbuf);
+        return err;
+}
+EXPORT_SYMBOL(video_ioctl2);
diff --git a/drivers/media/video/videobuf-dma-contig.c b/drivers/media/video/videobuf-dma-contig.c
index 03f20acb668c..31944b11e6ea 100644
--- a/drivers/media/video/videobuf-dma-contig.c
+++ b/drivers/media/video/videobuf-dma-contig.c
@@ -28,10 +28,10 @@ struct videobuf_dma_contig_memory {
 };
 
 #define MAGIC_DC_MEM 0x0733ac61
-#define MAGIC_CHECK(is, should)                                         \
-        if (unlikely((is) != (should))) {                               \
-                pr_err("magic mismatch: %x expected %x\n", is, should); \
-                BUG();                                                  \
+#define MAGIC_CHECK(is, should)                                             \
+        if (unlikely((is) != (should))) {                                   \
+                pr_err("magic mismatch: %x expected %x\n", (is), (should)); \
+                BUG();                                                      \
         }
 
 static void
diff --git a/drivers/media/video/videobuf-vmalloc.c b/drivers/media/video/videobuf-vmalloc.c
index a868b7ed75ff..be65a2fb3976 100644
--- a/drivers/media/video/videobuf-vmalloc.c
+++ b/drivers/media/video/videobuf-vmalloc.c
@@ -203,7 +203,7 @@ static int __videobuf_iolock (struct videobuf_queue* q,
                         return 0;
 
                 /* FIXME: to properly support USERPTR, remap should occur.
-                   The code bellow won't work, since mem->vma = NULL
+                   The code below won't work, since mem->vma = NULL
                  */
                 /* Try to remap memory */
                 rc = remap_vmalloc_range(mem->vma, (void *)vb->baddr, 0);
diff --git a/drivers/media/video/videodev.c b/drivers/media/video/videodev.c
index 6616e6570557..e69de29bb2d1 100644
--- a/drivers/media/video/videodev.c
+++ b/drivers/media/video/videodev.c
@@ -1,2262 +0,0 @@
-/*
- * Video capture interface for Linux version 2
- *
- *      A generic video device interface for the LINUX operating system
- *      using a set of device structures/vectors for low level operations.
- *
- *      This program is free software; you can redistribute it and/or
- *      modify it under the terms of the GNU General Public License
- *      as published by the Free Software Foundation; either version
- *      2 of the License, or (at your option) any later version.
- *
- * Authors:     Alan Cox, <alan@redhat.com> (version 1)
- *              Mauro Carvalho Chehab <mchehab@infradead.org> (version 2)
- *
- * Fixes:       20000516  Claudio Matsuoka <claudio@conectiva.com>
- *              - Added procfs support
- */
-
-#define dbgarg(cmd, fmt, arg...) \
-                do {                                                    \
-                    if (vfd->debug & V4L2_DEBUG_IOCTL_ARG) {            \
-                        printk(KERN_DEBUG "%s: ",  vfd->name);          \
-                        v4l_printk_ioctl(cmd);                          \
-                        printk(" " fmt,  ## arg);                       \
-                    }                                                   \
-                } while (0)
-
-#define dbgarg2(fmt, arg...) \
-                do {                                                    \
-                    if (vfd->debug & V4L2_DEBUG_IOCTL_ARG)              \
-                        printk(KERN_DEBUG "%s: " fmt, vfd->name, ## arg);\
-                } while (0)
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/kmod.h>
-#include <linux/slab.h>
-#include <linux/smp_lock.h>
-#include <asm/uaccess.h>
-#include <asm/system.h>
-
-#define __OLD_VIDIOC_ /* To allow fixing old calls*/
-#include <linux/videodev2.h>
-
-#ifdef CONFIG_VIDEO_V4L1
-#include <linux/videodev.h>
-#endif
-#include <media/v4l2-common.h>
-#include <linux/video_decoder.h>
-
-#define VIDEO_NUM_DEVICES       256
-#define VIDEO_NAME              "video4linux"
-
-struct std_descr {
-        v4l2_std_id std;
-        const char *descr;
-};
-
-static const struct std_descr standards[] = {
-        { V4L2_STD_NTSC,        "NTSC"      },
-        { V4L2_STD_NTSC_M,      "NTSC-M"    },
-        { V4L2_STD_NTSC_M_JP,   "NTSC-M-JP" },
-        { V4L2_STD_NTSC_M_KR,   "NTSC-M-KR" },
-        { V4L2_STD_NTSC_443,    "NTSC-443"  },
-        { V4L2_STD_PAL,         "PAL"       },
-        { V4L2_STD_PAL_BG,      "PAL-BG"    },
-        { V4L2_STD_PAL_B,       "PAL-B"     },
-        { V4L2_STD_PAL_B1,      "PAL-B1"    },
-        { V4L2_STD_PAL_G,       "PAL-G"     },
-        { V4L2_STD_PAL_H,       "PAL-H"     },
-        { V4L2_STD_PAL_I,       "PAL-I"     },
-        { V4L2_STD_PAL_DK,      "PAL-DK"    },
-        { V4L2_STD_PAL_D,       "PAL-D"     },
-        { V4L2_STD_PAL_D1,      "PAL-D1"    },
-        { V4L2_STD_PAL_K,       "PAL-K"     },
-        { V4L2_STD_PAL_M,       "PAL-M"     },
-        { V4L2_STD_PAL_N,       "PAL-N"     },
-        { V4L2_STD_PAL_Nc,      "PAL-Nc"    },
-        { V4L2_STD_PAL_60,      "PAL-60"    },
-        { V4L2_STD_SECAM,       "SECAM"     },
-        { V4L2_STD_SECAM_B,     "SECAM-B"   },
-        { V4L2_STD_SECAM_G,     "SECAM-G"   },
-        { V4L2_STD_SECAM_H,     "SECAM-H"   },
-        { V4L2_STD_SECAM_DK,    "SECAM-DK"  },
-        { V4L2_STD_SECAM_D,     "SECAM-D"   },
-        { V4L2_STD_SECAM_K,     "SECAM-K"   },
-        { V4L2_STD_SECAM_K1,    "SECAM-K1"  },
-        { V4L2_STD_SECAM_L,     "SECAM-L"   },
-        { V4L2_STD_SECAM_LC,    "SECAM-Lc"  },
-        { 0,                    "Unknown"   }
-};
-
-/* video4linux standard ID conversion to standard name
- */
-const char *v4l2_norm_to_name(v4l2_std_id id)
-{
-        u32 myid = id;
-        int i;
-
-        /* HACK: ppc32 architecture doesn't have __ucmpdi2 function to handle
-           64 bit comparations. So, on that architecture, with some gcc
-           variants, compilation fails. Currently, the max value is 30bit wide.
-         */
-        BUG_ON(myid != id);
-
-        for (i = 0; standards[i].std; i++)
-                if (myid == standards[i].std)
-                        break;
-        return standards[i].descr;
-}
-EXPORT_SYMBOL(v4l2_norm_to_name);
-
-/* Fill in the fields of a v4l2_standard structure according to the
-   'id' and 'transmission' parameters.  Returns negative on error.  */
-int v4l2_video_std_construct(struct v4l2_standard *vs,
-                             int id, const char *name)
-{
-        u32 index = vs->index;
-
-        memset(vs, 0, sizeof(struct v4l2_standard));
-        vs->index = index;
-        vs->id    = id;
-        if (id & V4L2_STD_525_60) {
-                vs->frameperiod.numerator = 1001;
-                vs->frameperiod.denominator = 30000;
-                vs->framelines = 525;
-        } else {
-                vs->frameperiod.numerator = 1;
-                vs->frameperiod.denominator = 25;
-                vs->framelines = 625;
-        }
-        strlcpy(vs->name, name, sizeof(vs->name));
-        return 0;
-}
-EXPORT_SYMBOL(v4l2_video_std_construct);
-
-/* ----------------------------------------------------------------- */
-/* some arrays for pretty-printing debug messages of enum types      */
-
-const char *v4l2_field_names[] = {
-        [V4L2_FIELD_ANY]        = "any",
-        [V4L2_FIELD_NONE]       = "none",
-        [V4L2_FIELD_TOP]        = "top",
-        [V4L2_FIELD_BOTTOM]     = "bottom",
-        [V4L2_FIELD_INTERLACED] = "interlaced",
-        [V4L2_FIELD_SEQ_TB]     = "seq-tb",
-        [V4L2_FIELD_SEQ_BT]     = "seq-bt",
-        [V4L2_FIELD_ALTERNATE]  = "alternate",
-        [V4L2_FIELD_INTERLACED_TB] = "interlaced-tb",
-        [V4L2_FIELD_INTERLACED_BT] = "interlaced-bt",
-};
-EXPORT_SYMBOL(v4l2_field_names);
-
-const char *v4l2_type_names[] = {
-        [V4L2_BUF_TYPE_VIDEO_CAPTURE]      = "vid-cap",
-        [V4L2_BUF_TYPE_VIDEO_OVERLAY]      = "vid-overlay",
-        [V4L2_BUF_TYPE_VIDEO_OUTPUT]       = "vid-out",
-        [V4L2_BUF_TYPE_VBI_CAPTURE]        = "vbi-cap",
-        [V4L2_BUF_TYPE_VBI_OUTPUT]         = "vbi-out",
-        [V4L2_BUF_TYPE_SLICED_VBI_CAPTURE] = "sliced-vbi-cap",
-        [V4L2_BUF_TYPE_SLICED_VBI_OUTPUT]  = "sliced-vbi-out",
-        [V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY] = "vid-out-overlay",
-};
-EXPORT_SYMBOL(v4l2_type_names);
-
-static const char *v4l2_memory_names[] = {
-        [V4L2_MEMORY_MMAP]    = "mmap",
-        [V4L2_MEMORY_USERPTR] = "userptr",
-        [V4L2_MEMORY_OVERLAY] = "overlay",
-};
-
-#define prt_names(a, arr) ((((a) >= 0) && ((a) < ARRAY_SIZE(arr))) ? \
-                           arr[a] : "unknown")
-
-/* ------------------------------------------------------------------ */
-/* debug help functions                                               */
-
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-static const char *v4l1_ioctls[] = {
-        [_IOC_NR(VIDIOCGCAP)]       = "VIDIOCGCAP",
-        [_IOC_NR(VIDIOCGCHAN)]      = "VIDIOCGCHAN",
-        [_IOC_NR(VIDIOCSCHAN)]      = "VIDIOCSCHAN",
-        [_IOC_NR(VIDIOCGTUNER)]     = "VIDIOCGTUNER",
-        [_IOC_NR(VIDIOCSTUNER)]     = "VIDIOCSTUNER",
-        [_IOC_NR(VIDIOCGPICT)]      = "VIDIOCGPICT",
-        [_IOC_NR(VIDIOCSPICT)]      = "VIDIOCSPICT",
-        [_IOC_NR(VIDIOCCAPTURE)]    = "VIDIOCCAPTURE",
-        [_IOC_NR(VIDIOCGWIN)]       = "VIDIOCGWIN",
-        [_IOC_NR(VIDIOCSWIN)]       = "VIDIOCSWIN",
-        [_IOC_NR(VIDIOCGFBUF)]      = "VIDIOCGFBUF",
-        [_IOC_NR(VIDIOCSFBUF)]      = "VIDIOCSFBUF",
-        [_IOC_NR(VIDIOCKEY)]        = "VIDIOCKEY",
-        [_IOC_NR(VIDIOCGFREQ)]      = "VIDIOCGFREQ",
-        [_IOC_NR(VIDIOCSFREQ)]      = "VIDIOCSFREQ",
-        [_IOC_NR(VIDIOCGAUDIO)]     = "VIDIOCGAUDIO",
-        [_IOC_NR(VIDIOCSAUDIO)]     = "VIDIOCSAUDIO",
-        [_IOC_NR(VIDIOCSYNC)]       = "VIDIOCSYNC",
-        [_IOC_NR(VIDIOCMCAPTURE)]   = "VIDIOCMCAPTURE",
-        [_IOC_NR(VIDIOCGMBUF)]      = "VIDIOCGMBUF",
-        [_IOC_NR(VIDIOCGUNIT)]      = "VIDIOCGUNIT",
-        [_IOC_NR(VIDIOCGCAPTURE)]   = "VIDIOCGCAPTURE",
-        [_IOC_NR(VIDIOCSCAPTURE)]   = "VIDIOCSCAPTURE",
-        [_IOC_NR(VIDIOCSPLAYMODE)]  = "VIDIOCSPLAYMODE",
-        [_IOC_NR(VIDIOCSWRITEMODE)] = "VIDIOCSWRITEMODE",
-        [_IOC_NR(VIDIOCGPLAYINFO)]  = "VIDIOCGPLAYINFO",
-        [_IOC_NR(VIDIOCSMICROCODE)] = "VIDIOCSMICROCODE",
-        [_IOC_NR(VIDIOCGVBIFMT)]    = "VIDIOCGVBIFMT",
-        [_IOC_NR(VIDIOCSVBIFMT)]    = "VIDIOCSVBIFMT"
-};
-#define V4L1_IOCTLS ARRAY_SIZE(v4l1_ioctls)
-#endif
-
-static const char *v4l2_ioctls[] = {
-        [_IOC_NR(VIDIOC_QUERYCAP)]         = "VIDIOC_QUERYCAP",
-        [_IOC_NR(VIDIOC_RESERVED)]         = "VIDIOC_RESERVED",
-        [_IOC_NR(VIDIOC_ENUM_FMT)]         = "VIDIOC_ENUM_FMT",
-        [_IOC_NR(VIDIOC_G_FMT)]            = "VIDIOC_G_FMT",
-        [_IOC_NR(VIDIOC_S_FMT)]            = "VIDIOC_S_FMT",
-        [_IOC_NR(VIDIOC_REQBUFS)]          = "VIDIOC_REQBUFS",
-        [_IOC_NR(VIDIOC_QUERYBUF)]         = "VIDIOC_QUERYBUF",
-        [_IOC_NR(VIDIOC_G_FBUF)]           = "VIDIOC_G_FBUF",
-        [_IOC_NR(VIDIOC_S_FBUF)]           = "VIDIOC_S_FBUF",
-        [_IOC_NR(VIDIOC_OVERLAY)]          = "VIDIOC_OVERLAY",
-        [_IOC_NR(VIDIOC_QBUF)]             = "VIDIOC_QBUF",
-        [_IOC_NR(VIDIOC_DQBUF)]            = "VIDIOC_DQBUF",
-        [_IOC_NR(VIDIOC_STREAMON)]         = "VIDIOC_STREAMON",
-        [_IOC_NR(VIDIOC_STREAMOFF)]        = "VIDIOC_STREAMOFF",
-        [_IOC_NR(VIDIOC_G_PARM)]           = "VIDIOC_G_PARM",
-        [_IOC_NR(VIDIOC_S_PARM)]           = "VIDIOC_S_PARM",
-        [_IOC_NR(VIDIOC_G_STD)]            = "VIDIOC_G_STD",
-        [_IOC_NR(VIDIOC_S_STD)]            = "VIDIOC_S_STD",
-        [_IOC_NR(VIDIOC_ENUMSTD)]          = "VIDIOC_ENUMSTD",
-        [_IOC_NR(VIDIOC_ENUMINPUT)]        = "VIDIOC_ENUMINPUT",
-        [_IOC_NR(VIDIOC_G_CTRL)]           = "VIDIOC_G_CTRL",
-        [_IOC_NR(VIDIOC_S_CTRL)]           = "VIDIOC_S_CTRL",
-        [_IOC_NR(VIDIOC_G_TUNER)]          = "VIDIOC_G_TUNER",
-        [_IOC_NR(VIDIOC_S_TUNER)]          = "VIDIOC_S_TUNER",
-        [_IOC_NR(VIDIOC_G_AUDIO)]          = "VIDIOC_G_AUDIO",
-        [_IOC_NR(VIDIOC_S_AUDIO)]          = "VIDIOC_S_AUDIO",
-        [_IOC_NR(VIDIOC_QUERYCTRL)]        = "VIDIOC_QUERYCTRL",
-        [_IOC_NR(VIDIOC_QUERYMENU)]        = "VIDIOC_QUERYMENU",
-        [_IOC_NR(VIDIOC_G_INPUT)]          = "VIDIOC_G_INPUT",
-        [_IOC_NR(VIDIOC_S_INPUT)]          = "VIDIOC_S_INPUT",
-        [_IOC_NR(VIDIOC_G_OUTPUT)]         = "VIDIOC_G_OUTPUT",
-        [_IOC_NR(VIDIOC_S_OUTPUT)]         = "VIDIOC_S_OUTPUT",
-        [_IOC_NR(VIDIOC_ENUMOUTPUT)]       = "VIDIOC_ENUMOUTPUT",
-        [_IOC_NR(VIDIOC_G_AUDOUT)]         = "VIDIOC_G_AUDOUT",
-        [_IOC_NR(VIDIOC_S_AUDOUT)]         = "VIDIOC_S_AUDOUT",
-        [_IOC_NR(VIDIOC_G_MODULATOR)]      = "VIDIOC_G_MODULATOR",
-        [_IOC_NR(VIDIOC_S_MODULATOR)]      = "VIDIOC_S_MODULATOR",
-        [_IOC_NR(VIDIOC_G_FREQUENCY)]      = "VIDIOC_G_FREQUENCY",
-        [_IOC_NR(VIDIOC_S_FREQUENCY)]      = "VIDIOC_S_FREQUENCY",
-        [_IOC_NR(VIDIOC_CROPCAP)]          = "VIDIOC_CROPCAP",
-        [_IOC_NR(VIDIOC_G_CROP)]           = "VIDIOC_G_CROP",
-        [_IOC_NR(VIDIOC_S_CROP)]           = "VIDIOC_S_CROP",
-        [_IOC_NR(VIDIOC_G_JPEGCOMP)]       = "VIDIOC_G_JPEGCOMP",
-        [_IOC_NR(VIDIOC_S_JPEGCOMP)]       = "VIDIOC_S_JPEGCOMP",
-        [_IOC_NR(VIDIOC_QUERYSTD)]         = "VIDIOC_QUERYSTD",
-        [_IOC_NR(VIDIOC_TRY_FMT)]          = "VIDIOC_TRY_FMT",
-        [_IOC_NR(VIDIOC_ENUMAUDIO)]        = "VIDIOC_ENUMAUDIO",
-        [_IOC_NR(VIDIOC_ENUMAUDOUT)]       = "VIDIOC_ENUMAUDOUT",
-        [_IOC_NR(VIDIOC_G_PRIORITY)]       = "VIDIOC_G_PRIORITY",
-        [_IOC_NR(VIDIOC_S_PRIORITY)]       = "VIDIOC_S_PRIORITY",
-        [_IOC_NR(VIDIOC_G_SLICED_VBI_CAP)] = "VIDIOC_G_SLICED_VBI_CAP",
-        [_IOC_NR(VIDIOC_LOG_STATUS)]       = "VIDIOC_LOG_STATUS",
-        [_IOC_NR(VIDIOC_G_EXT_CTRLS)]      = "VIDIOC_G_EXT_CTRLS",
-        [_IOC_NR(VIDIOC_S_EXT_CTRLS)]      = "VIDIOC_S_EXT_CTRLS",
-        [_IOC_NR(VIDIOC_TRY_EXT_CTRLS)]    = "VIDIOC_TRY_EXT_CTRLS",
-#if 1
-        [_IOC_NR(VIDIOC_ENUM_FRAMESIZES)]  = "VIDIOC_ENUM_FRAMESIZES",
-        [_IOC_NR(VIDIOC_ENUM_FRAMEINTERVALS)] = "VIDIOC_ENUM_FRAMEINTERVALS",
-        [_IOC_NR(VIDIOC_G_ENC_INDEX)]      = "VIDIOC_G_ENC_INDEX",
-        [_IOC_NR(VIDIOC_ENCODER_CMD)]      = "VIDIOC_ENCODER_CMD",
-        [_IOC_NR(VIDIOC_TRY_ENCODER_CMD)]  = "VIDIOC_TRY_ENCODER_CMD",
-
-        [_IOC_NR(VIDIOC_DBG_S_REGISTER)]   = "VIDIOC_DBG_S_REGISTER",
-        [_IOC_NR(VIDIOC_DBG_G_REGISTER)]   = "VIDIOC_DBG_G_REGISTER",
-
-        [_IOC_NR(VIDIOC_G_CHIP_IDENT)]     = "VIDIOC_G_CHIP_IDENT",
-        [_IOC_NR(VIDIOC_S_HW_FREQ_SEEK)]   = "VIDIOC_S_HW_FREQ_SEEK",
-#endif
-};
-#define V4L2_IOCTLS ARRAY_SIZE(v4l2_ioctls)
-
-static const char *v4l2_int_ioctls[] = {
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-        [_IOC_NR(DECODER_GET_CAPABILITIES)]    = "DECODER_GET_CAPABILITIES",
-        [_IOC_NR(DECODER_GET_STATUS)]          = "DECODER_GET_STATUS",
-        [_IOC_NR(DECODER_SET_NORM)]            = "DECODER_SET_NORM",
-        [_IOC_NR(DECODER_SET_INPUT)]           = "DECODER_SET_INPUT",
-        [_IOC_NR(DECODER_SET_OUTPUT)]          = "DECODER_SET_OUTPUT",
-        [_IOC_NR(DECODER_ENABLE_OUTPUT)]       = "DECODER_ENABLE_OUTPUT",
-        [_IOC_NR(DECODER_SET_PICTURE)]         = "DECODER_SET_PICTURE",
-        [_IOC_NR(DECODER_SET_GPIO)]            = "DECODER_SET_GPIO",
-        [_IOC_NR(DECODER_INIT)]                = "DECODER_INIT",
-        [_IOC_NR(DECODER_SET_VBI_BYPASS)]      = "DECODER_SET_VBI_BYPASS",
-        [_IOC_NR(DECODER_DUMP)]                = "DECODER_DUMP",
-#endif
-        [_IOC_NR(AUDC_SET_RADIO)]              = "AUDC_SET_RADIO",
-
-        [_IOC_NR(TUNER_SET_TYPE_ADDR)]         = "TUNER_SET_TYPE_ADDR",
-        [_IOC_NR(TUNER_SET_STANDBY)]           = "TUNER_SET_STANDBY",
-        [_IOC_NR(TUNER_SET_CONFIG)]            = "TUNER_SET_CONFIG",
-
-        [_IOC_NR(VIDIOC_INT_S_TUNER_MODE)]     = "VIDIOC_INT_S_TUNER_MODE",
-        [_IOC_NR(VIDIOC_INT_RESET)]            = "VIDIOC_INT_RESET",
-        [_IOC_NR(VIDIOC_INT_AUDIO_CLOCK_FREQ)] = "VIDIOC_INT_AUDIO_CLOCK_FREQ",
-        [_IOC_NR(VIDIOC_INT_DECODE_VBI_LINE)]  = "VIDIOC_INT_DECODE_VBI_LINE",
-        [_IOC_NR(VIDIOC_INT_S_VBI_DATA)]       = "VIDIOC_INT_S_VBI_DATA",
-        [_IOC_NR(VIDIOC_INT_G_VBI_DATA)]       = "VIDIOC_INT_G_VBI_DATA",
-        [_IOC_NR(VIDIOC_INT_I2S_CLOCK_FREQ)]   = "VIDIOC_INT_I2S_CLOCK_FREQ",
-        [_IOC_NR(VIDIOC_INT_S_STANDBY)]        = "VIDIOC_INT_S_STANDBY",
-        [_IOC_NR(VIDIOC_INT_S_AUDIO_ROUTING)]  = "VIDIOC_INT_S_AUDIO_ROUTING",
-        [_IOC_NR(VIDIOC_INT_G_AUDIO_ROUTING)]  = "VIDIOC_INT_G_AUDIO_ROUTING",
-        [_IOC_NR(VIDIOC_INT_S_VIDEO_ROUTING)]  = "VIDIOC_INT_S_VIDEO_ROUTING",
-        [_IOC_NR(VIDIOC_INT_G_VIDEO_ROUTING)]  = "VIDIOC_INT_G_VIDEO_ROUTING",
-        [_IOC_NR(VIDIOC_INT_S_CRYSTAL_FREQ)]   = "VIDIOC_INT_S_CRYSTAL_FREQ",
-        [_IOC_NR(VIDIOC_INT_INIT)]             = "VIDIOC_INT_INIT",
-        [_IOC_NR(VIDIOC_INT_G_STD_OUTPUT)]     = "VIDIOC_INT_G_STD_OUTPUT",
-        [_IOC_NR(VIDIOC_INT_S_STD_OUTPUT)]     = "VIDIOC_INT_S_STD_OUTPUT",
-};
-#define V4L2_INT_IOCTLS ARRAY_SIZE(v4l2_int_ioctls)
-
-/* Common ioctl debug function. This function can be used by
-   external ioctl messages as well as internal V4L ioctl */
-void v4l_printk_ioctl(unsigned int cmd)
-{
-        char *dir, *type;
-
-        switch (_IOC_TYPE(cmd)) {
-        case 'd':
-                if (_IOC_NR(cmd) >= V4L2_INT_IOCTLS) {
-                        type = "v4l2_int";
-                        break;
-                }
-                printk("%s", v4l2_int_ioctls[_IOC_NR(cmd)]);
-                return;
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-        case 'v':
-                if (_IOC_NR(cmd) >= V4L1_IOCTLS) {
-                        type = "v4l1";
-                        break;
-                }
-                printk("%s", v4l1_ioctls[_IOC_NR(cmd)]);
-                return;
-#endif
-        case 'V':
-                if (_IOC_NR(cmd) >= V4L2_IOCTLS) {
-                        type = "v4l2";
-                        break;
-                }
-                printk("%s", v4l2_ioctls[_IOC_NR(cmd)]);
-                return;
-        default:
-                type = "unknown";
-        }
-
-        switch (_IOC_DIR(cmd)) {
-        case _IOC_NONE:              dir = "--"; break;
-        case _IOC_READ:              dir = "r-"; break;
-        case _IOC_WRITE:             dir = "-w"; break;
-        case _IOC_READ | _IOC_WRITE: dir = "rw"; break;
-        default:                     dir = "*ERR*"; break;
-        }
-        printk("%s ioctl '%c', dir=%s, #%d (0x%08x)",
-                type, _IOC_TYPE(cmd), dir, _IOC_NR(cmd), cmd);
-}
-EXPORT_SYMBOL(v4l_printk_ioctl);
-
-/*
- *      sysfs stuff
- */
-
-static ssize_t show_index(struct device *cd,
-                         struct device_attribute *attr, char *buf)
-{
-        struct video_device *vfd = container_of(cd, struct video_device,
-                                                class_dev);
-        return sprintf(buf, "%i\n", vfd->index);
-}
-
-static ssize_t show_name(struct device *cd,
-                         struct device_attribute *attr, char *buf)
-{
-        struct video_device *vfd = container_of(cd, struct video_device,
-                                                class_dev);
-        return sprintf(buf, "%.*s\n", (int)sizeof(vfd->name), vfd->name);
-}
-
-static struct device_attribute video_device_attrs[] = {
-        __ATTR(name, S_IRUGO, show_name, NULL),
-        __ATTR(index, S_IRUGO, show_index, NULL),
-        __ATTR_NULL
-};
-
-struct video_device *video_device_alloc(void)
-{
-        struct video_device *vfd;
-
-        vfd = kzalloc(sizeof(*vfd),GFP_KERNEL);
-        return vfd;
-}
-EXPORT_SYMBOL(video_device_alloc);
-
-void video_device_release(struct video_device *vfd)
-{
-        kfree(vfd);
-}
-EXPORT_SYMBOL(video_device_release);
-
-static void video_release(struct device *cd)
-{
-        struct video_device *vfd = container_of(cd, struct video_device,
-                                                                class_dev);
-
-#if 1
-        /* needed until all drivers are fixed */
-        if (!vfd->release)
-                return;
-#endif
-        vfd->release(vfd);
-}
-
-static struct class video_class = {
-        .name    = VIDEO_NAME,
-        .dev_attrs = video_device_attrs,
-        .dev_release = video_release,
-};
-
-/*
- *      Active devices
- */
-
-static struct video_device *video_device[VIDEO_NUM_DEVICES];
-static DEFINE_MUTEX(videodev_lock);
-
-struct video_device* video_devdata(struct file *file)
-{
-        return video_device[iminor(file->f_path.dentry->d_inode)];
-}
-EXPORT_SYMBOL(video_devdata);
-
-/*
- *      Open a video device - FIXME: Obsoleted
- */
-static int video_open(struct inode *inode, struct file *file)
-{
-        unsigned int minor = iminor(inode);
-        int err = 0;
-        struct video_device *vfl;
-        const struct file_operations *old_fops;
-
-        if(minor>=VIDEO_NUM_DEVICES)
-                return -ENODEV;
-        lock_kernel();
-        mutex_lock(&videodev_lock);
-        vfl=video_device[minor];
-        if(vfl==NULL) {
-                mutex_unlock(&videodev_lock);
-                request_module("char-major-%d-%d", VIDEO_MAJOR, minor);
-                mutex_lock(&videodev_lock);
-                vfl=video_device[minor];
-                if (vfl==NULL) {
-                        mutex_unlock(&videodev_lock);
-                        unlock_kernel();
-                        return -ENODEV;
-                }
-        }
-        old_fops = file->f_op;
-        file->f_op = fops_get(vfl->fops);
-        if(file->f_op->open)
-                err = file->f_op->open(inode,file);
-        if (err) {
-                fops_put(file->f_op);
-                file->f_op = fops_get(old_fops);
-        }
-        fops_put(old_fops);
-        mutex_unlock(&videodev_lock);
-        unlock_kernel();
-        return err;
-}
-
-/*
- * helper function -- handles userspace copying for ioctl arguments
- */
-
-#ifdef __OLD_VIDIOC_
-static unsigned int
-video_fix_command(unsigned int cmd)
-{
-        switch (cmd) {
-        case VIDIOC_OVERLAY_OLD:
-                cmd = VIDIOC_OVERLAY;
-                break;
-        case VIDIOC_S_PARM_OLD:
-                cmd = VIDIOC_S_PARM;
-                break;
-        case VIDIOC_S_CTRL_OLD:
-                cmd = VIDIOC_S_CTRL;
-                break;
-        case VIDIOC_G_AUDIO_OLD:
-                cmd = VIDIOC_G_AUDIO;
-                break;
-        case VIDIOC_G_AUDOUT_OLD:
-                cmd = VIDIOC_G_AUDOUT;
-                break;
-        case VIDIOC_CROPCAP_OLD:
-                cmd = VIDIOC_CROPCAP;
-                break;
-        }
-        return cmd;
-}
-#endif
-
-/*
- * Obsolete usercopy function - Should be removed soon
- */
-int
-video_usercopy(struct inode *inode, struct file *file,
-               unsigned int cmd, unsigned long arg,
-               int (*func)(struct inode *inode, struct file *file,
-                           unsigned int cmd, void *arg))
-{
-        char    sbuf[128];
-        void    *mbuf = NULL;
-        void    *parg = NULL;
-        int     err  = -EINVAL;
-        int     is_ext_ctrl;
-        size_t  ctrls_size = 0;
-        void __user *user_ptr = NULL;
-
-#ifdef __OLD_VIDIOC_
-        cmd = video_fix_command(cmd);
-#endif
-        is_ext_ctrl = (cmd == VIDIOC_S_EXT_CTRLS || cmd == VIDIOC_G_EXT_CTRLS ||
-                       cmd == VIDIOC_TRY_EXT_CTRLS);
-
-        /*  Copy arguments into temp kernel buffer  */
-        switch (_IOC_DIR(cmd)) {
-        case _IOC_NONE:
-                parg = NULL;
-                break;
-        case _IOC_READ:
-        case _IOC_WRITE:
-        case (_IOC_WRITE | _IOC_READ):
-                if (_IOC_SIZE(cmd) <= sizeof(sbuf)) {
-                        parg = sbuf;
-                } else {
-                        /* too big to allocate from stack */
-                        mbuf = kmalloc(_IOC_SIZE(cmd),GFP_KERNEL);
-                        if (NULL == mbuf)
-                                return -ENOMEM;
-                        parg = mbuf;
-                }
-
-                err = -EFAULT;
-                if (_IOC_DIR(cmd) & _IOC_WRITE)
-                        if (copy_from_user(parg, (void __user *)arg, _IOC_SIZE(cmd)))
-                                goto out;
-                break;
-        }
-        if (is_ext_ctrl) {
-                struct v4l2_ext_controls *p = parg;
-
-                /* In case of an error, tell the caller that it wasn't
-                   a specific control that caused it. */
-                p->error_idx = p->count;
-                user_ptr = (void __user *)p->controls;
-                if (p->count) {
-                        ctrls_size = sizeof(struct v4l2_ext_control) * p->count;
-                        /* Note: v4l2_ext_controls fits in sbuf[] so mbuf is still NULL. */
-                        mbuf = kmalloc(ctrls_size, GFP_KERNEL);
-                        err = -ENOMEM;
-                        if (NULL == mbuf)
-                                goto out_ext_ctrl;
-                        err = -EFAULT;
-                        if (copy_from_user(mbuf, user_ptr, ctrls_size))
-                                goto out_ext_ctrl;
-                        p->controls = mbuf;
-                }
-        }
-
-        /* call driver */
-        err = func(inode, file, cmd, parg);
-        if (err == -ENOIOCTLCMD)
-                err = -EINVAL;
-        if (is_ext_ctrl) {
-                struct v4l2_ext_controls *p = parg;
-
-                p->controls = (void *)user_ptr;
-                if (p->count && err == 0 && copy_to_user(user_ptr, mbuf, ctrls_size))
-                        err = -EFAULT;
-                goto out_ext_ctrl;
-        }
-        if (err < 0)
-                goto out;
-
-out_ext_ctrl:
-        /*  Copy results into user buffer  */
-        switch (_IOC_DIR(cmd))
-        {
-        case _IOC_READ:
-        case (_IOC_WRITE | _IOC_READ):
-                if (copy_to_user((void __user *)arg, parg, _IOC_SIZE(cmd)))
-                        err = -EFAULT;
-                break;
-        }
-
-out:
-        kfree(mbuf);
-        return err;
-}
-EXPORT_SYMBOL(video_usercopy);
-
-/*
- * open/release helper functions -- handle exclusive opens
- * Should be removed soon
- */
-int video_exclusive_open(struct inode *inode, struct file *file)
-{
-        struct  video_device *vfl = video_devdata(file);
-        int retval = 0;
-
-        mutex_lock(&vfl->lock);
-        if (vfl->users) {
-                retval = -EBUSY;
-        } else {
-                vfl->users++;
-        }
-        mutex_unlock(&vfl->lock);
-        return retval;
-}
-EXPORT_SYMBOL(video_exclusive_open);
-
-int video_exclusive_release(struct inode *inode, struct file *file)
-{
-        struct  video_device *vfl = video_devdata(file);
-
-        vfl->users--;
-        return 0;
-}
-EXPORT_SYMBOL(video_exclusive_release);
-
-static void dbgbuf(unsigned int cmd, struct video_device *vfd,
-                                        struct v4l2_buffer *p)
-{
-        struct v4l2_timecode *tc=&p->timecode;
-
-        dbgarg (cmd, "%02ld:%02d:%02d.%08ld index=%d, type=%s, "
-                "bytesused=%d, flags=0x%08d, "
-                "field=%0d, sequence=%d, memory=%s, offset/userptr=0x%08lx, length=%d\n",
-                        (p->timestamp.tv_sec/3600),
-                        (int)(p->timestamp.tv_sec/60)%60,
-                        (int)(p->timestamp.tv_sec%60),
-                        p->timestamp.tv_usec,
-                        p->index,
-                        prt_names(p->type, v4l2_type_names),
-                        p->bytesused, p->flags,
-                        p->field, p->sequence,
-                        prt_names(p->memory, v4l2_memory_names),
-                        p->m.userptr, p->length);
-        dbgarg2("timecode=%02d:%02d:%02d type=%d, "
-                "flags=0x%08d, frames=%d, userbits=0x%08x\n",
-                        tc->hours,tc->minutes,tc->seconds,
-                        tc->type, tc->flags, tc->frames, *(__u32 *) tc->userbits);
-}
-
-static inline void dbgrect(struct video_device *vfd, char *s,
-                                                        struct v4l2_rect *r)
-{
-        dbgarg2("%sRect start at %dx%d, size=%dx%d\n", s, r->left, r->top,
-                                                r->width, r->height);
-};
-
-static inline void v4l_print_pix_fmt (struct video_device *vfd,
-                                                struct v4l2_pix_format *fmt)
-{
-        dbgarg2 ("width=%d, height=%d, format=%c%c%c%c, field=%s, "
-                "bytesperline=%d sizeimage=%d, colorspace=%d\n",
-                fmt->width,fmt->height,
-                (fmt->pixelformat & 0xff),
-                (fmt->pixelformat >>  8) & 0xff,
-                (fmt->pixelformat >> 16) & 0xff,
-                (fmt->pixelformat >> 24) & 0xff,
-                prt_names(fmt->field, v4l2_field_names),
-                fmt->bytesperline, fmt->sizeimage, fmt->colorspace);
-};
-
-static inline void v4l_print_ext_ctrls(unsigned int cmd,
-        struct video_device *vfd, struct v4l2_ext_controls *c, int show_vals)
-{
-        __u32 i;
-
-        if (!(vfd->debug & V4L2_DEBUG_IOCTL_ARG))
-                return;
-        dbgarg(cmd, "");
-        printk(KERN_CONT "class=0x%x", c->ctrl_class);
-        for (i = 0; i < c->count; i++) {
-                if (show_vals)
-                        printk(KERN_CONT " id/val=0x%x/0x%x",
-                                c->controls[i].id, c->controls[i].value);
-                else
-                        printk(KERN_CONT " id=0x%x", c->controls[i].id);
-        }
-        printk(KERN_CONT "\n");
-};
-
-static inline int check_ext_ctrls(struct v4l2_ext_controls *c, int allow_priv)
-{
-        __u32 i;
-
-        /* zero the reserved fields */
-        c->reserved[0] = c->reserved[1] = 0;
-        for (i = 0; i < c->count; i++) {
-                c->controls[i].reserved2[0] = 0;
-                c->controls[i].reserved2[1] = 0;
-        }
-        /* V4L2_CID_PRIVATE_BASE cannot be used as control class
-           when using extended controls.
-           Only when passed in through VIDIOC_G_CTRL and VIDIOC_S_CTRL
-           is it allowed for backwards compatibility.
-         */
-        if (!allow_priv && c->ctrl_class == V4L2_CID_PRIVATE_BASE)
-                return 0;
-        /* Check that all controls are from the same control class. */
-        for (i = 0; i < c->count; i++) {
-                if (V4L2_CTRL_ID2CLASS(c->controls[i].id) != c->ctrl_class) {
-                        c->error_idx = i;
-                        return 0;
-                }
-        }
-        return 1;
-}
-
-static int check_fmt (struct video_device *vfd, enum v4l2_buf_type type)
-{
-        switch (type) {
-        case V4L2_BUF_TYPE_VIDEO_CAPTURE:
-                if (vfd->vidioc_try_fmt_vid_cap)
-                        return (0);
-                break;
-        case V4L2_BUF_TYPE_VIDEO_OVERLAY:
-                if (vfd->vidioc_try_fmt_vid_overlay)
-                        return (0);
-                break;
-        case V4L2_BUF_TYPE_VIDEO_OUTPUT:
-                if (vfd->vidioc_try_fmt_vid_out)
-                        return (0);
-                break;
-        case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY:
-                if (vfd->vidioc_try_fmt_vid_out_overlay)
-                        return (0);
-                break;
-        case V4L2_BUF_TYPE_VBI_CAPTURE:
-                if (vfd->vidioc_try_fmt_vbi_cap)
-                        return (0);
-                break;
-        case V4L2_BUF_TYPE_VBI_OUTPUT:
-                if (vfd->vidioc_try_fmt_vbi_out)
-                        return (0);
-                break;
-        case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE:
-                if (vfd->vidioc_try_fmt_sliced_vbi_cap)
-                        return (0);
-                break;
-        case V4L2_BUF_TYPE_SLICED_VBI_OUTPUT:
-                if (vfd->vidioc_try_fmt_sliced_vbi_out)
-                        return (0);
-                break;
-        case V4L2_BUF_TYPE_PRIVATE:
-                if (vfd->vidioc_try_fmt_type_private)
-                        return (0);
-                break;
-        }
-        return (-EINVAL);
-}
-
-static int __video_do_ioctl(struct inode *inode, struct file *file,
-                unsigned int cmd, void *arg)
-{
-        struct video_device *vfd = video_devdata(file);
-        void                 *fh = file->private_data;
-        int                  ret = -EINVAL;
-
-        if ( (vfd->debug & V4L2_DEBUG_IOCTL) &&
-                                !(vfd->debug & V4L2_DEBUG_IOCTL_ARG)) {
-                v4l_print_ioctl(vfd->name, cmd);
-                printk("\n");
-        }
-
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-        /***********************************************************
-         Handles calls to the obsoleted V4L1 API
-         Due to the nature of VIDIOCGMBUF, each driver that supports
-         V4L1 should implement its own handler for this ioctl.
-         ***********************************************************/
-
-        /* --- streaming capture ------------------------------------- */
-        if (cmd == VIDIOCGMBUF) {
-                struct video_mbuf *p=arg;
-
-                memset(p, 0, sizeof(*p));
-
-                if (!vfd->vidiocgmbuf)
-                        return ret;
-                ret=vfd->vidiocgmbuf(file, fh, p);
-                if (!ret)
-                        dbgarg (cmd, "size=%d, frames=%d, offsets=0x%08lx\n",
-                                                p->size, p->frames,
-                                                (unsigned long)p->offsets);
-                return ret;
-        }
-
-        /********************************************************
-         All other V4L1 calls are handled by v4l1_compat module.
-         Those calls will be translated into V4L2 calls, and
-         __video_do_ioctl will be called again, with one or more
-         V4L2 ioctls.
-         ********************************************************/
-        if (_IOC_TYPE(cmd)=='v')
-                return v4l_compat_translate_ioctl(inode,file,cmd,arg,
-                                                __video_do_ioctl);
-#endif
-
-        switch(cmd) {
-        /* --- capabilities ------------------------------------------ */
-        case VIDIOC_QUERYCAP:
-        {
-                struct v4l2_capability *cap = (struct v4l2_capability*)arg;
-                memset(cap, 0, sizeof(*cap));
-
-                if (!vfd->vidioc_querycap)
-                        break;
-
-                ret=vfd->vidioc_querycap(file, fh, cap);
-                if (!ret)
-                        dbgarg (cmd, "driver=%s, card=%s, bus=%s, "
-                                        "version=0x%08x, "
-                                        "capabilities=0x%08x\n",
-                                        cap->driver,cap->card,cap->bus_info,
-                                        cap->version,
-                                        cap->capabilities);
-                break;
-        }
-
-        /* --- priority ------------------------------------------ */
-        case VIDIOC_G_PRIORITY:
-        {
-                enum v4l2_priority *p=arg;
-
-                if (!vfd->vidioc_g_priority)
-                        break;
-                ret=vfd->vidioc_g_priority(file, fh, p);
-                if (!ret)
-                        dbgarg(cmd, "priority is %d\n", *p);
-                break;
-        }
-        case VIDIOC_S_PRIORITY:
-        {
-                enum v4l2_priority *p=arg;
-
-                if (!vfd->vidioc_s_priority)
-                        break;
-                dbgarg(cmd, "setting priority to %d\n", *p);
-                ret=vfd->vidioc_s_priority(file, fh, *p);
-                break;
-        }
-
-        /* --- capture ioctls ---------------------------------------- */
-        case VIDIOC_ENUM_FMT:
-        {
-                struct v4l2_fmtdesc *f = arg;
-                enum v4l2_buf_type type;
-                unsigned int index;
-
-                index = f->index;
-                type  = f->type;
-                memset(f,0,sizeof(*f));
-                f->index = index;
-                f->type  = type;
-
-                switch (type) {
-                case V4L2_BUF_TYPE_VIDEO_CAPTURE:
-                        if (vfd->vidioc_enum_fmt_vid_cap)
-                                ret = vfd->vidioc_enum_fmt_vid_cap(file, fh, f);
-                        break;
-                case V4L2_BUF_TYPE_VIDEO_OVERLAY:
-                        if (vfd->vidioc_enum_fmt_vid_overlay)
-                                ret = vfd->vidioc_enum_fmt_vid_overlay(file,
-                                        fh, f);
-                        break;
-#if 1
-                /* V4L2_BUF_TYPE_VBI_CAPTURE should not support VIDIOC_ENUM_FMT
-                 * according to the spec. The bttv and saa7134 drivers support
-                 * it though, so just warn that this is deprecated and will be
-                 * removed in the near future. */
-                case V4L2_BUF_TYPE_VBI_CAPTURE:
-                        if (vfd->vidioc_enum_fmt_vbi_cap) {
-                                printk(KERN_WARNING "vidioc_enum_fmt_vbi_cap will be removed in 2.6.28!\n");
-                                ret = vfd->vidioc_enum_fmt_vbi_cap(file, fh, f);
-                        }
-                        break;
-#endif
-                case V4L2_BUF_TYPE_VIDEO_OUTPUT:
-                        if (vfd->vidioc_enum_fmt_vid_out)
-                                ret = vfd->vidioc_enum_fmt_vid_out(file, fh, f);
-                        break;
-                case V4L2_BUF_TYPE_PRIVATE:
-                        if (vfd->vidioc_enum_fmt_type_private)
-                                ret = vfd->vidioc_enum_fmt_type_private(file,
-                                                                fh, f);
-                        break;
-                default:
-                        break;
-                }
-                if (!ret)
-                        dbgarg (cmd, "index=%d, type=%d, flags=%d, "
-                                        "pixelformat=%c%c%c%c, description='%s'\n",
-                                        f->index, f->type, f->flags,
-                                        (f->pixelformat & 0xff),
-                                        (f->pixelformat >>  8) & 0xff,
-                                        (f->pixelformat >> 16) & 0xff,
-                                        (f->pixelformat >> 24) & 0xff,
-                                        f->description);
-                break;
-        }
-        case VIDIOC_G_FMT:
-        {
-                struct v4l2_format *f = (struct v4l2_format *)arg;
-
-                memset(f->fmt.raw_data, 0, sizeof(f->fmt.raw_data));
-
-                /* FIXME: Should be one dump per type */
-                dbgarg(cmd, "type=%s\n", prt_names(f->type, v4l2_type_names));
-
-                switch (f->type) {
-                case V4L2_BUF_TYPE_VIDEO_CAPTURE:
-                        if (vfd->vidioc_g_fmt_vid_cap)
-                                ret = vfd->vidioc_g_fmt_vid_cap(file, fh, f);
-                        if (!ret)
-                                v4l_print_pix_fmt(vfd, &f->fmt.pix);
-                        break;
-                case V4L2_BUF_TYPE_VIDEO_OVERLAY:
-                        if (vfd->vidioc_g_fmt_vid_overlay)
-                                ret = vfd->vidioc_g_fmt_vid_overlay(file,
-                                                                    fh, f);
-                        break;
-                case V4L2_BUF_TYPE_VIDEO_OUTPUT:
-                        if (vfd->vidioc_g_fmt_vid_out)
-                                ret = vfd->vidioc_g_fmt_vid_out(file, fh, f);
-                        if (!ret)
-                                v4l_print_pix_fmt(vfd, &f->fmt.pix);
-                        break;
-                case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY:
-                        if (vfd->vidioc_g_fmt_vid_out_overlay)
-                                ret = vfd->vidioc_g_fmt_vid_out_overlay(file,
-                                       fh, f);
-                        break;
-                case V4L2_BUF_TYPE_VBI_CAPTURE:
-                        if (vfd->vidioc_g_fmt_vbi_cap)
-                                ret = vfd->vidioc_g_fmt_vbi_cap(file, fh, f);
-                        break;
-                case V4L2_BUF_TYPE_VBI_OUTPUT:
-                        if (vfd->vidioc_g_fmt_vbi_out)
-                                ret = vfd->vidioc_g_fmt_vbi_out(file, fh, f);
-                        break;
-                case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE:
-                        if (vfd->vidioc_g_fmt_sliced_vbi_cap)
-                                ret = vfd->vidioc_g_fmt_sliced_vbi_cap(file,
-                                                                        fh, f);
-                        break;
-                case V4L2_BUF_TYPE_SLICED_VBI_OUTPUT:
-                        if (vfd->vidioc_g_fmt_sliced_vbi_out)
-                                ret = vfd->vidioc_g_fmt_sliced_vbi_out(file,
-                                                                        fh, f);
-                        break;
-                case V4L2_BUF_TYPE_PRIVATE:
-                        if (vfd->vidioc_g_fmt_type_private)
-                                ret = vfd->vidioc_g_fmt_type_private(file,
-                                                                fh, f);
-                        break;
-                }
-
-                break;
-        }
-        case VIDIOC_S_FMT:
-        {
-                struct v4l2_format *f = (struct v4l2_format *)arg;
-
-                /* FIXME: Should be one dump per type */
-                dbgarg(cmd, "type=%s\n", prt_names(f->type, v4l2_type_names));
-
-                switch (f->type) {
-                case V4L2_BUF_TYPE_VIDEO_CAPTURE:
-                        v4l_print_pix_fmt(vfd, &f->fmt.pix);
-                        if (vfd->vidioc_s_fmt_vid_cap)
-                                ret = vfd->vidioc_s_fmt_vid_cap(file, fh, f);
-                        break;
-                case V4L2_BUF_TYPE_VIDEO_OVERLAY:
-                        if (vfd->vidioc_s_fmt_vid_overlay)
-                                ret = vfd->vidioc_s_fmt_vid_overlay(file,
-                                                                    fh, f);
-                        break;
-                case V4L2_BUF_TYPE_VIDEO_OUTPUT:
-                        v4l_print_pix_fmt(vfd, &f->fmt.pix);
-                        if (vfd->vidioc_s_fmt_vid_out)
-                                ret = vfd->vidioc_s_fmt_vid_out(file, fh, f);
-                        break;
-                case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY:
-                        if (vfd->vidioc_s_fmt_vid_out_overlay)
-                                ret = vfd->vidioc_s_fmt_vid_out_overlay(file,
-                                        fh, f);
-                        break;
-                case V4L2_BUF_TYPE_VBI_CAPTURE:
-                        if (vfd->vidioc_s_fmt_vbi_cap)
-                                ret = vfd->vidioc_s_fmt_vbi_cap(file, fh, f);
-                        break;
-                case V4L2_BUF_TYPE_VBI_OUTPUT:
-                        if (vfd->vidioc_s_fmt_vbi_out)
-                                ret = vfd->vidioc_s_fmt_vbi_out(file, fh, f);
-                        break;
-                case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE:
-                        if (vfd->vidioc_s_fmt_sliced_vbi_cap)
-                                ret = vfd->vidioc_s_fmt_sliced_vbi_cap(file,
-                                                                        fh, f);
-                        break;
-                case V4L2_BUF_TYPE_SLICED_VBI_OUTPUT:
-                        if (vfd->vidioc_s_fmt_sliced_vbi_out)
-                                ret = vfd->vidioc_s_fmt_sliced_vbi_out(file,
-                                                                        fh, f);
-                        break;
-                case V4L2_BUF_TYPE_PRIVATE:
-                        if (vfd->vidioc_s_fmt_type_private)
-                                ret = vfd->vidioc_s_fmt_type_private(file,
-                                                                fh, f);
-                        break;
-                }
-                break;
-        }
-        case VIDIOC_TRY_FMT:
-        {
-                struct v4l2_format *f = (struct v4l2_format *)arg;
-
-                /* FIXME: Should be one dump per type */
-                dbgarg (cmd, "type=%s\n", prt_names(f->type,
-                                                v4l2_type_names));
-                switch (f->type) {
-                case V4L2_BUF_TYPE_VIDEO_CAPTURE:
-                        if (vfd->vidioc_try_fmt_vid_cap)
-                                ret = vfd->vidioc_try_fmt_vid_cap(file, fh, f);
-                        if (!ret)
-                                v4l_print_pix_fmt(vfd, &f->fmt.pix);
-                        break;
-                case V4L2_BUF_TYPE_VIDEO_OVERLAY:
-                        if (vfd->vidioc_try_fmt_vid_overlay)
-                                ret = vfd->vidioc_try_fmt_vid_overlay(file,
-                                        fh, f);
-                        break;
-                case V4L2_BUF_TYPE_VIDEO_OUTPUT:
-                        if (vfd->vidioc_try_fmt_vid_out)
-                                ret = vfd->vidioc_try_fmt_vid_out(file, fh, f);
-                        if (!ret)
-                                v4l_print_pix_fmt(vfd, &f->fmt.pix);
-                        break;
-                case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY:
-                        if (vfd->vidioc_try_fmt_vid_out_overlay)
-                                ret = vfd->vidioc_try_fmt_vid_out_overlay(file,
-                                       fh, f);
-                        break;
-                case V4L2_BUF_TYPE_VBI_CAPTURE:
-                        if (vfd->vidioc_try_fmt_vbi_cap)
-                                ret = vfd->vidioc_try_fmt_vbi_cap(file, fh, f);
-                        break;
-                case V4L2_BUF_TYPE_VBI_OUTPUT:
-                        if (vfd->vidioc_try_fmt_vbi_out)
-                                ret = vfd->vidioc_try_fmt_vbi_out(file, fh, f);
-                        break;
-                case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE:
-                        if (vfd->vidioc_try_fmt_sliced_vbi_cap)
-                                ret = vfd->vidioc_try_fmt_sliced_vbi_cap(file,
-                                                                fh, f);
-                        break;
-                case V4L2_BUF_TYPE_SLICED_VBI_OUTPUT:
-                        if (vfd->vidioc_try_fmt_sliced_vbi_out)
-                                ret = vfd->vidioc_try_fmt_sliced_vbi_out(file,
-                                                                fh, f);
-                        break;
-                case V4L2_BUF_TYPE_PRIVATE:
-                        if (vfd->vidioc_try_fmt_type_private)
-                                ret = vfd->vidioc_try_fmt_type_private(file,
-                                                                fh, f);
-                        break;
-                }
-
-                break;
-        }
-        /* FIXME: Those buf reqs could be handled here,
-           with some changes on videobuf to allow its header to be included at
-           videodev2.h or being merged at videodev2.
-         */
-        case VIDIOC_REQBUFS:
-        {
-                struct v4l2_requestbuffers *p=arg;
-
-                if (!vfd->vidioc_reqbufs)
-                        break;
-                ret = check_fmt (vfd, p->type);
-                if (ret)
-                        break;
-
-                ret=vfd->vidioc_reqbufs(file, fh, p);
-                dbgarg (cmd, "count=%d, type=%s, memory=%s\n",
-                                p->count,
-                                prt_names(p->type, v4l2_type_names),
-                                prt_names(p->memory, v4l2_memory_names));
-                break;
-        }
-        case VIDIOC_QUERYBUF:
-        {
-                struct v4l2_buffer *p=arg;
-
-                if (!vfd->vidioc_querybuf)
-                        break;
-                ret = check_fmt (vfd, p->type);
-                if (ret)
-                        break;
-
-                ret=vfd->vidioc_querybuf(file, fh, p);
-                if (!ret)
-                        dbgbuf(cmd,vfd,p);
-                break;
-        }
-        case VIDIOC_QBUF:
-        {
-                struct v4l2_buffer *p=arg;
-
-                if (!vfd->vidioc_qbuf)
-                        break;
-                ret = check_fmt (vfd, p->type);
-                if (ret)
-                        break;
-
-                ret=vfd->vidioc_qbuf(file, fh, p);
-                if (!ret)
-                        dbgbuf(cmd,vfd,p);
-                break;
-        }
-        case VIDIOC_DQBUF:
-        {
-                struct v4l2_buffer *p=arg;
-                if (!vfd->vidioc_dqbuf)
-                        break;
-                ret = check_fmt (vfd, p->type);
-                if (ret)
-                        break;
-
-                ret=vfd->vidioc_dqbuf(file, fh, p);
-                if (!ret)
-                        dbgbuf(cmd,vfd,p);
-                break;
-        }
-        case VIDIOC_OVERLAY:
-        {
-                int *i = arg;
-
-                if (!vfd->vidioc_overlay)
-                        break;
-                dbgarg (cmd, "value=%d\n",*i);
-                ret=vfd->vidioc_overlay(file, fh, *i);
-                break;
-        }
-        case VIDIOC_G_FBUF:
-        {
-                struct v4l2_framebuffer *p = arg;
-
-                if (!vfd->vidioc_g_fbuf)
-                        break;
-                ret = vfd->vidioc_g_fbuf(file, fh, arg);
-                if (!ret) {
-                        dbgarg(cmd, "capability=0x%x, flags=%d, base=0x%08lx\n",
-                                        p->capability, p->flags,
-                                        (unsigned long)p->base);
-                        v4l_print_pix_fmt(vfd, &p->fmt);
-                }
-                break;
-        }
-        case VIDIOC_S_FBUF:
-        {
-                struct v4l2_framebuffer *p = arg;
-
-                if (!vfd->vidioc_s_fbuf)
-                        break;
-                dbgarg(cmd, "capability=0x%x, flags=%d, base=0x%08lx\n",
-                        p->capability, p->flags, (unsigned long)p->base);
-                v4l_print_pix_fmt(vfd, &p->fmt);
-                ret = vfd->vidioc_s_fbuf(file, fh, arg);
-                break;
-        }
-        case VIDIOC_STREAMON:
-        {
-                enum v4l2_buf_type i = *(int *)arg;
-                if (!vfd->vidioc_streamon)
-                        break;
-                dbgarg(cmd, "type=%s\n", prt_names(i, v4l2_type_names));
-                ret=vfd->vidioc_streamon(file, fh,i);
-                break;
-        }
-        case VIDIOC_STREAMOFF:
-        {
-                enum v4l2_buf_type i = *(int *)arg;
-
-                if (!vfd->vidioc_streamoff)
-                        break;
-                dbgarg(cmd, "type=%s\n", prt_names(i, v4l2_type_names));
-                ret=vfd->vidioc_streamoff(file, fh, i);
-                break;
-        }
-        /* ---------- tv norms ---------- */
-        case VIDIOC_ENUMSTD:
-        {
-                struct v4l2_standard *p = arg;
-                v4l2_std_id id = vfd->tvnorms, curr_id = 0;
-                unsigned int index = p->index, i, j = 0;
-                const char *descr = "";
-
-                /* Return norm array in a canonical way */
-                for (i = 0; i <= index && id; i++) {
-                        /* last std value in the standards array is 0, so this
-                           while always ends there since (id & 0) == 0. */
-                        while ((id & standards[j].std) != standards[j].std)
-                                j++;
-                        curr_id = standards[j].std;
-                        descr = standards[j].descr;
-                        j++;
-                        if (curr_id == 0)
-                                break;
-                        if (curr_id != V4L2_STD_PAL &&
-                            curr_id != V4L2_STD_SECAM &&
-                            curr_id != V4L2_STD_NTSC)
-                                id &= ~curr_id;
-                }
-                if (i <= index)
-                        return -EINVAL;
-
-                v4l2_video_std_construct(p, curr_id, descr);
-                p->index = index;
-
-                dbgarg(cmd, "index=%d, id=0x%Lx, name=%s, fps=%d/%d, "
-                                "framelines=%d\n", p->index,
-                                (unsigned long long)p->id, p->name,
-                                p->frameperiod.numerator,
-                                p->frameperiod.denominator,
-                                p->framelines);
-
-                ret = 0;
-                break;
-        }
-        case VIDIOC_G_STD:
-        {
-                v4l2_std_id *id = arg;
-
-                ret = 0;
-                /* Calls the specific handler */
-                if (vfd->vidioc_g_std)
-                        ret = vfd->vidioc_g_std(file, fh, id);
-                else
-                        *id = vfd->current_norm;
-
-                if (!ret)
-                        dbgarg(cmd, "std=0x%08Lx\n", (long long unsigned)*id);
-                break;
-        }
-        case VIDIOC_S_STD:
-        {
-                v4l2_std_id *id = arg,norm;
-
-                dbgarg(cmd, "std=%08Lx\n", (long long unsigned)*id);
-
-                norm = (*id) & vfd->tvnorms;
-                if ( vfd->tvnorms && !norm)     /* Check if std is supported */
-                        break;
-
-                /* Calls the specific handler */
-                if (vfd->vidioc_s_std)
-                        ret=vfd->vidioc_s_std(file, fh, &norm);
-                else
-                        ret=-EINVAL;
-
-                /* Updates standard information */
-                if (ret>=0)
-                        vfd->current_norm=norm;
-
-                break;
-        }
-        case VIDIOC_QUERYSTD:
-        {
-                v4l2_std_id *p=arg;
-
-                if (!vfd->vidioc_querystd)
-                        break;
-                ret=vfd->vidioc_querystd(file, fh, arg);
-                if (!ret)
-                        dbgarg (cmd, "detected std=%08Lx\n",
-                                                (unsigned long long)*p);
-                break;
-        }
-        /* ------ input switching ---------- */
-        /* FIXME: Inputs can be handled inside videodev2 */
-        case VIDIOC_ENUMINPUT:
-        {
-                struct v4l2_input *p=arg;
-                int i=p->index;
-
-                if (!vfd->vidioc_enum_input)
-                        break;
-                memset(p, 0, sizeof(*p));
-                p->index=i;
-
-                ret=vfd->vidioc_enum_input(file, fh, p);
-                if (!ret)
-                        dbgarg (cmd, "index=%d, name=%s, type=%d, "
-                                        "audioset=%d, "
-                                        "tuner=%d, std=%08Lx, status=%d\n",
-                                        p->index,p->name,p->type,p->audioset,
-                                        p->tuner,
-                                        (unsigned long long)p->std,
-                                        p->status);
-                break;
-        }
-        case VIDIOC_G_INPUT:
-        {
-                unsigned int *i = arg;
-
-                if (!vfd->vidioc_g_input)
-                        break;
-                ret=vfd->vidioc_g_input(file, fh, i);
-                if (!ret)
-                        dbgarg (cmd, "value=%d\n",*i);
-                break;
-        }
-        case VIDIOC_S_INPUT:
-        {
-                unsigned int *i = arg;
-
-                if (!vfd->vidioc_s_input)
-                        break;
-                dbgarg (cmd, "value=%d\n",*i);
-                ret=vfd->vidioc_s_input(file, fh, *i);
-                break;
-        }
-
-        /* ------ output switching ---------- */
-        case VIDIOC_ENUMOUTPUT:
-        {
-                struct v4l2_output *p = arg;
-                int i = p->index;
-
-                if (!vfd->vidioc_enum_output)
-                        break;
-                memset(p, 0, sizeof(*p));
-                p->index = i;
-
-                ret = vfd->vidioc_enum_output(file, fh, p);
-                if (!ret)
-                        dbgarg(cmd, "index=%d, name=%s, type=%d, "
-                                "audioset=0x%x, "
-                                "modulator=%d, std=0x%08Lx\n",
-                                p->index, p->name, p->type, p->audioset,
-                                p->modulator, (unsigned long long)p->std);
-                break;
-        }
-        case VIDIOC_G_OUTPUT:
-        {
-                unsigned int *i = arg;
-
-                if (!vfd->vidioc_g_output)
-                        break;
-                ret=vfd->vidioc_g_output(file, fh, i);
-                if (!ret)
-                        dbgarg (cmd, "value=%d\n",*i);
-                break;
-        }
-        case VIDIOC_S_OUTPUT:
-        {
-                unsigned int *i = arg;
-
-                if (!vfd->vidioc_s_output)
-                        break;
-                dbgarg (cmd, "value=%d\n",*i);
-                ret=vfd->vidioc_s_output(file, fh, *i);
-                break;
-        }
-
-        /* --- controls ---------------------------------------------- */
-        case VIDIOC_QUERYCTRL:
-        {
-                struct v4l2_queryctrl *p = arg;
-
-                if (!vfd->vidioc_queryctrl)
-                        break;
-                ret = vfd->vidioc_queryctrl(file, fh, p);
-                if (!ret)
-                        dbgarg(cmd, "id=0x%x, type=%d, name=%s, min/max=%d/%d, "
-                                        "step=%d, default=%d, flags=0x%08x\n",
-                                        p->id, p->type, p->name,
-                                        p->minimum, p->maximum,
-                                        p->step, p->default_value, p->flags);
-                else
-                        dbgarg(cmd, "id=0x%x\n", p->id);
-                break;
-        }
-        case VIDIOC_G_CTRL:
-        {
-                struct v4l2_control *p = arg;
-
-                if (vfd->vidioc_g_ctrl)
-                        ret = vfd->vidioc_g_ctrl(file, fh, p);
-                else if (vfd->vidioc_g_ext_ctrls) {
-                        struct v4l2_ext_controls ctrls;
-                        struct v4l2_ext_control ctrl;
-
-                        ctrls.ctrl_class = V4L2_CTRL_ID2CLASS(p->id);
-                        ctrls.count = 1;
-                        ctrls.controls = &ctrl;
-                        ctrl.id = p->id;
-                        ctrl.value = p->value;
-                        if (check_ext_ctrls(&ctrls, 1)) {
-                                ret = vfd->vidioc_g_ext_ctrls(file, fh, &ctrls);
-                                if (ret == 0)
-                                        p->value = ctrl.value;
-                        }
-                } else
-                        break;
-                if (!ret)
-                        dbgarg(cmd, "id=0x%x, value=%d\n", p->id, p->value);
-                else
-                        dbgarg(cmd, "id=0x%x\n", p->id);
-                break;
-        }
-        case VIDIOC_S_CTRL:
-        {
-                struct v4l2_control *p = arg;
-                struct v4l2_ext_controls ctrls;
-                struct v4l2_ext_control ctrl;
-
-                if (!vfd->vidioc_s_ctrl && !vfd->vidioc_s_ext_ctrls)
-                        break;
-
-                dbgarg(cmd, "id=0x%x, value=%d\n", p->id, p->value);
-
-                if (vfd->vidioc_s_ctrl) {
-                        ret = vfd->vidioc_s_ctrl(file, fh, p);
-                        break;
-                }
-                if (!vfd->vidioc_s_ext_ctrls)
-                        break;
-
-                ctrls.ctrl_class = V4L2_CTRL_ID2CLASS(p->id);
-                ctrls.count = 1;
-                ctrls.controls = &ctrl;
-                ctrl.id = p->id;
-                ctrl.value = p->value;
-                if (check_ext_ctrls(&ctrls, 1))
-                        ret = vfd->vidioc_s_ext_ctrls(file, fh, &ctrls);
-                break;
-        }
-        case VIDIOC_G_EXT_CTRLS:
-        {
-                struct v4l2_ext_controls *p = arg;
-
-                p->error_idx = p->count;
-                if (!vfd->vidioc_g_ext_ctrls)
-                        break;
-                if (check_ext_ctrls(p, 0))
-                        ret = vfd->vidioc_g_ext_ctrls(file, fh, p);
-                v4l_print_ext_ctrls(cmd, vfd, p, !ret);
-                break;
-        }
-        case VIDIOC_S_EXT_CTRLS:
-        {
-                struct v4l2_ext_controls *p = arg;
-
-                p->error_idx = p->count;
-                if (!vfd->vidioc_s_ext_ctrls)
-                        break;
-                v4l_print_ext_ctrls(cmd, vfd, p, 1);
-                if (check_ext_ctrls(p, 0))
-                        ret = vfd->vidioc_s_ext_ctrls(file, fh, p);
-                break;
-        }
-        case VIDIOC_TRY_EXT_CTRLS:
-        {
-                struct v4l2_ext_controls *p = arg;
-
-                p->error_idx = p->count;
-                if (!vfd->vidioc_try_ext_ctrls)
-                        break;
-                v4l_print_ext_ctrls(cmd, vfd, p, 1);
-                if (check_ext_ctrls(p, 0))
-                        ret = vfd->vidioc_try_ext_ctrls(file, fh, p);
-                break;
-        }
-        case VIDIOC_QUERYMENU:
-        {
-                struct v4l2_querymenu *p = arg;
-
-                if (!vfd->vidioc_querymenu)
-                        break;
-                ret = vfd->vidioc_querymenu(file, fh, p);
-                if (!ret)
-                        dbgarg(cmd, "id=0x%x, index=%d, name=%s\n",
-                                p->id, p->index, p->name);
-                else
-                        dbgarg(cmd, "id=0x%x, index=%d\n",
-                                p->id, p->index);
-                break;
-        }
-        /* --- audio ---------------------------------------------- */
-        case VIDIOC_ENUMAUDIO:
-        {
-                struct v4l2_audio *p = arg;
-
-                if (!vfd->vidioc_enumaudio)
-                        break;
-                ret = vfd->vidioc_enumaudio(file, fh, p);
-                if (!ret)
-                        dbgarg(cmd, "index=%d, name=%s, capability=0x%x, "
-                                        "mode=0x%x\n", p->index, p->name,
-                                        p->capability, p->mode);
-                else
-                        dbgarg(cmd, "index=%d\n", p->index);
-                break;
-        }
-        case VIDIOC_G_AUDIO:
-        {
-                struct v4l2_audio *p = arg;
-                __u32 index = p->index;
-
-                if (!vfd->vidioc_g_audio)
-                        break;
-
-                memset(p, 0, sizeof(*p));
-                p->index = index;
-                ret = vfd->vidioc_g_audio(file, fh, p);
-                if (!ret)
-                        dbgarg(cmd, "index=%d, name=%s, capability=0x%x, "
-                                        "mode=0x%x\n", p->index,
-                                        p->name, p->capability, p->mode);
-                else
-                        dbgarg(cmd, "index=%d\n", p->index);
-                break;
-        }
-        case VIDIOC_S_AUDIO:
-        {
-                struct v4l2_audio *p = arg;
-
-                if (!vfd->vidioc_s_audio)
-                        break;
-                dbgarg(cmd, "index=%d, name=%s, capability=0x%x, "
-                                        "mode=0x%x\n", p->index, p->name,
-                                        p->capability, p->mode);
-                ret = vfd->vidioc_s_audio(file, fh, p);
-                break;
-        }
-        case VIDIOC_ENUMAUDOUT:
-        {
-                struct v4l2_audioout *p=arg;
-
-                if (!vfd->vidioc_enumaudout)
-                        break;
-                dbgarg(cmd, "Enum for index=%d\n", p->index);
-                ret=vfd->vidioc_enumaudout(file, fh, p);
-                if (!ret)
-                        dbgarg2("index=%d, name=%s, capability=%d, "
-                                        "mode=%d\n", p->index, p->name,
-                                        p->capability,p->mode);
-                break;
-        }
-        case VIDIOC_G_AUDOUT:
-        {
-                struct v4l2_audioout *p=arg;
-
-                if (!vfd->vidioc_g_audout)
-                        break;
-                dbgarg(cmd, "Enum for index=%d\n", p->index);
-                ret=vfd->vidioc_g_audout(file, fh, p);
-                if (!ret)
-                        dbgarg2("index=%d, name=%s, capability=%d, "
-                                        "mode=%d\n", p->index, p->name,
-                                        p->capability,p->mode);
-                break;
-        }
-        case VIDIOC_S_AUDOUT:
-        {
-                struct v4l2_audioout *p=arg;
-
-                if (!vfd->vidioc_s_audout)
-                        break;
-                dbgarg(cmd, "index=%d, name=%s, capability=%d, "
-                                        "mode=%d\n", p->index, p->name,
-                                        p->capability,p->mode);
-
-                ret=vfd->vidioc_s_audout(file, fh, p);
-                break;
-        }
-        case VIDIOC_G_MODULATOR:
-        {
-                struct v4l2_modulator *p=arg;
-                if (!vfd->vidioc_g_modulator)
-                        break;
-                ret=vfd->vidioc_g_modulator(file, fh, p);
-                if (!ret)
-                        dbgarg(cmd, "index=%d, name=%s, "
-                                        "capability=%d, rangelow=%d,"
-                                        " rangehigh=%d, txsubchans=%d\n",
-                                        p->index, p->name,p->capability,
-                                        p->rangelow, p->rangehigh,
-                                        p->txsubchans);
-                break;
-        }
-        case VIDIOC_S_MODULATOR:
-        {
-                struct v4l2_modulator *p=arg;
-                if (!vfd->vidioc_s_modulator)
-                        break;
-                dbgarg(cmd, "index=%d, name=%s, capability=%d, "
-                                "rangelow=%d, rangehigh=%d, txsubchans=%d\n",
-                                p->index, p->name,p->capability,p->rangelow,
-                                p->rangehigh,p->txsubchans);
-                        ret=vfd->vidioc_s_modulator(file, fh, p);
-                break;
-        }
-        case VIDIOC_G_CROP:
-        {
-                struct v4l2_crop *p=arg;
-                if (!vfd->vidioc_g_crop)
-                        break;
-                dbgarg(cmd, "type=%s\n", prt_names(p->type, v4l2_type_names));
-                ret=vfd->vidioc_g_crop(file, fh, p);
-                if (!ret) {
-                        dbgrect(vfd, "", &p->c);
-                }
-                break;
-        }
-        case VIDIOC_S_CROP:
-        {
-                struct v4l2_crop *p=arg;
-                if (!vfd->vidioc_s_crop)
-                        break;
-                dbgarg(cmd, "type=%s\n", prt_names(p->type, v4l2_type_names));
-                dbgrect(vfd, "", &p->c);
-                ret=vfd->vidioc_s_crop(file, fh, p);
-                break;
-        }
-        case VIDIOC_CROPCAP:
-        {
-                struct v4l2_cropcap *p = arg;
-
-                /*FIXME: Should also show v4l2_fract pixelaspect */
-                if (!vfd->vidioc_cropcap)
-                        break;
-                dbgarg(cmd, "type=%s\n", prt_names(p->type, v4l2_type_names));
-                ret = vfd->vidioc_cropcap(file, fh, p);
-                if (!ret) {
-                        dbgrect(vfd, "bounds ", &p->bounds);
-                        dbgrect(vfd, "defrect ", &p->defrect);
-                }
-                break;
-        }
-        case VIDIOC_G_JPEGCOMP:
-        {
-                struct v4l2_jpegcompression *p=arg;
-                if (!vfd->vidioc_g_jpegcomp)
-                        break;
-                ret=vfd->vidioc_g_jpegcomp(file, fh, p);
-                if (!ret)
-                        dbgarg (cmd, "quality=%d, APPn=%d, "
-                                                "APP_len=%d, COM_len=%d, "
-                                                "jpeg_markers=%d\n",
-                                                p->quality,p->APPn,p->APP_len,
-                                                p->COM_len,p->jpeg_markers);
-                break;
-        }
-        case VIDIOC_S_JPEGCOMP:
-        {
-                struct v4l2_jpegcompression *p=arg;
-                if (!vfd->vidioc_g_jpegcomp)
-                        break;
-                dbgarg (cmd, "quality=%d, APPn=%d, APP_len=%d, "
-                                        "COM_len=%d, jpeg_markers=%d\n",
-                                        p->quality,p->APPn,p->APP_len,
-                                        p->COM_len,p->jpeg_markers);
-                        ret=vfd->vidioc_s_jpegcomp(file, fh, p);
-                break;
-        }
-        case VIDIOC_G_ENC_INDEX:
-        {
-                struct v4l2_enc_idx *p=arg;
-
-                if (!vfd->vidioc_g_enc_index)
-                        break;
-                ret=vfd->vidioc_g_enc_index(file, fh, p);
-                if (!ret)
-                        dbgarg (cmd, "entries=%d, entries_cap=%d\n",
-                                        p->entries,p->entries_cap);
-                break;
-        }
-        case VIDIOC_ENCODER_CMD:
-        {
-                struct v4l2_encoder_cmd *p = arg;
-
-                if (!vfd->vidioc_encoder_cmd)
-                        break;
-                memset(&p->raw, 0, sizeof(p->raw));
-                ret = vfd->vidioc_encoder_cmd(file, fh, p);
-                if (!ret)
-                        dbgarg(cmd, "cmd=%d, flags=%x\n", p->cmd, p->flags);
-                break;
-        }
-        case VIDIOC_TRY_ENCODER_CMD:
-        {
-                struct v4l2_encoder_cmd *p = arg;
-
-                if (!vfd->vidioc_try_encoder_cmd)
-                        break;
-                memset(&p->raw, 0, sizeof(p->raw));
-                ret = vfd->vidioc_try_encoder_cmd(file, fh, p);
-                if (!ret)
-                        dbgarg(cmd, "cmd=%d, flags=%x\n", p->cmd, p->flags);
-                break;
-        }
-        case VIDIOC_G_PARM:
-        {
-                struct v4l2_streamparm *p=arg;
-                __u32 type=p->type;
-
-                memset(p,0,sizeof(*p));
-                p->type=type;
-
-                if (vfd->vidioc_g_parm) {
-                        ret=vfd->vidioc_g_parm(file, fh, p);
-                } else {
-                        struct v4l2_standard s;
-
-                        if (p->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
-                                return -EINVAL;
-
-                        v4l2_video_std_construct(&s, vfd->current_norm,
-                                                 v4l2_norm_to_name(vfd->current_norm));
-
-                        p->parm.capture.timeperframe = s.frameperiod;
-                        ret=0;
-                }
-
-                dbgarg (cmd, "type=%d\n", p->type);
-                break;
-        }
-        case VIDIOC_S_PARM:
-        {
-                struct v4l2_streamparm *p=arg;
-                if (!vfd->vidioc_s_parm)
-                        break;
-                dbgarg (cmd, "type=%d\n", p->type);
-                ret=vfd->vidioc_s_parm(file, fh, p);
-                break;
-        }
-        case VIDIOC_G_TUNER:
-        {
-                struct v4l2_tuner *p = arg;
-                __u32 index = p->index;
-
-                if (!vfd->vidioc_g_tuner)
-                        break;
-
-                memset(p, 0, sizeof(*p));
-                p->index = index;
-
-                ret = vfd->vidioc_g_tuner(file, fh, p);
-                if (!ret)
-                        dbgarg(cmd, "index=%d, name=%s, type=%d, "
-                                        "capability=0x%x, rangelow=%d, "
-                                        "rangehigh=%d, signal=%d, afc=%d, "
-                                        "rxsubchans=0x%x, audmode=%d\n",
-                                        p->index, p->name, p->type,
-                                        p->capability, p->rangelow,
-                                        p->rangehigh, p->signal, p->afc,
-                                        p->rxsubchans, p->audmode);
-                break;
-        }
-        case VIDIOC_S_TUNER:
-        {
-                struct v4l2_tuner *p = arg;
-
-                if (!vfd->vidioc_s_tuner)
-                        break;
-                dbgarg(cmd, "index=%d, name=%s, type=%d, "
-                                "capability=0x%x, rangelow=%d, "
-                                "rangehigh=%d, signal=%d, afc=%d, "
-                                "rxsubchans=0x%x, audmode=%d\n",
-                                p->index, p->name, p->type,
-                                p->capability, p->rangelow,
-                                p->rangehigh, p->signal, p->afc,
-                                p->rxsubchans, p->audmode);
-                ret = vfd->vidioc_s_tuner(file, fh, p);
-                break;
-        }
-        case VIDIOC_G_FREQUENCY:
-        {
-                struct v4l2_frequency *p = arg;
-
-                if (!vfd->vidioc_g_frequency)
-                        break;
-
-                memset(p->reserved, 0, sizeof(p->reserved));
-
-                ret = vfd->vidioc_g_frequency(file, fh, p);
-                if (!ret)
-                        dbgarg(cmd, "tuner=%d, type=%d, frequency=%d\n",
-                                        p->tuner, p->type, p->frequency);
-                break;
-        }
-        case VIDIOC_S_FREQUENCY:
-        {
-                struct v4l2_frequency *p=arg;
-                if (!vfd->vidioc_s_frequency)
-                        break;
-                dbgarg (cmd, "tuner=%d, type=%d, frequency=%d\n",
-                                p->tuner,p->type,p->frequency);
-                ret=vfd->vidioc_s_frequency(file, fh, p);
-                break;
-        }
-        case VIDIOC_G_SLICED_VBI_CAP:
-        {
-                struct v4l2_sliced_vbi_cap *p = arg;
-                __u32 type = p->type;
-
-                if (!vfd->vidioc_g_sliced_vbi_cap)
-                        break;
-                memset(p, 0, sizeof(*p));
-                p->type = type;
-                dbgarg(cmd, "type=%s\n", prt_names(p->type, v4l2_type_names));
-                ret = vfd->vidioc_g_sliced_vbi_cap(file, fh, p);
-                if (!ret)
-                        dbgarg2("service_set=%d\n", p->service_set);
-                break;
-        }
-        case VIDIOC_LOG_STATUS:
-        {
-                if (!vfd->vidioc_log_status)
-                        break;
-                ret=vfd->vidioc_log_status(file, fh);
-                break;
-        }
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-        case VIDIOC_DBG_G_REGISTER:
-        {
-                struct v4l2_register *p=arg;
-                if (!capable(CAP_SYS_ADMIN))
-                        ret=-EPERM;
-                else if (vfd->vidioc_g_register)
-                        ret=vfd->vidioc_g_register(file, fh, p);
-                break;
-        }
-        case VIDIOC_DBG_S_REGISTER:
-        {
-                struct v4l2_register *p=arg;
-                if (!capable(CAP_SYS_ADMIN))
-                        ret=-EPERM;
-                else if (vfd->vidioc_s_register)
-                        ret=vfd->vidioc_s_register(file, fh, p);
-                break;
-        }
-#endif
-        case VIDIOC_G_CHIP_IDENT:
-        {
-                struct v4l2_chip_ident *p=arg;
-                if (!vfd->vidioc_g_chip_ident)
-                        break;
-                ret=vfd->vidioc_g_chip_ident(file, fh, p);
-                if (!ret)
-                        dbgarg (cmd, "chip_ident=%u, revision=0x%x\n", p->ident, p->revision);
-                break;
-        }
-        default:
-        {
-                if (!vfd->vidioc_default)
-                        break;
-                ret = vfd->vidioc_default(file, fh, cmd, arg);
-                break;
-        }
-        case VIDIOC_S_HW_FREQ_SEEK:
-        {
-                struct v4l2_hw_freq_seek *p = arg;
-                if (!vfd->vidioc_s_hw_freq_seek)
-                        break;
-                dbgarg(cmd,
-                        "tuner=%d, type=%d, seek_upward=%d, wrap_around=%d\n",
-                        p->tuner, p->type, p->seek_upward, p->wrap_around);
-                ret = vfd->vidioc_s_hw_freq_seek(file, fh, p);
-                break;
-        }
-        } /* switch */
-
-        if (vfd->debug & V4L2_DEBUG_IOCTL_ARG) {
-                if (ret < 0) {
-                        v4l_print_ioctl(vfd->name, cmd);
-                        printk(KERN_CONT " error %d\n", ret);
-                }
-        }
-
-        return ret;
-}
-
-int video_ioctl2 (struct inode *inode, struct file *file,
-               unsigned int cmd, unsigned long arg)
-{
-        char    sbuf[128];
-        void    *mbuf = NULL;
-        void    *parg = NULL;
-        int     err  = -EINVAL;
-        int     is_ext_ctrl;
-        size_t  ctrls_size = 0;
-        void __user *user_ptr = NULL;
-
-#ifdef __OLD_VIDIOC_
-        cmd = video_fix_command(cmd);
-#endif
-        is_ext_ctrl = (cmd == VIDIOC_S_EXT_CTRLS || cmd == VIDIOC_G_EXT_CTRLS ||
-                       cmd == VIDIOC_TRY_EXT_CTRLS);
-
-        /*  Copy arguments into temp kernel buffer  */
-        switch (_IOC_DIR(cmd)) {
-        case _IOC_NONE:
-                parg = NULL;
-                break;
-        case _IOC_READ:
-        case _IOC_WRITE:
-        case (_IOC_WRITE | _IOC_READ):
-                if (_IOC_SIZE(cmd) <= sizeof(sbuf)) {
-                        parg = sbuf;
-                } else {
-                        /* too big to allocate from stack */
-                        mbuf = kmalloc(_IOC_SIZE(cmd),GFP_KERNEL);
-                        if (NULL == mbuf)
-                                return -ENOMEM;
-                        parg = mbuf;
-                }
-
-                err = -EFAULT;
-                if (_IOC_DIR(cmd) & _IOC_WRITE)
-                        if (copy_from_user(parg, (void __user *)arg, _IOC_SIZE(cmd)))
-                                goto out;
-                break;
-        }
-
-        if (is_ext_ctrl) {
-                struct v4l2_ext_controls *p = parg;
-
-                /* In case of an error, tell the caller that it wasn't
-                   a specific control that caused it. */
-                p->error_idx = p->count;
-                user_ptr = (void __user *)p->controls;
-                if (p->count) {
-                        ctrls_size = sizeof(struct v4l2_ext_control) * p->count;
-                        /* Note: v4l2_ext_controls fits in sbuf[] so mbuf is still NULL. */
-                        mbuf = kmalloc(ctrls_size, GFP_KERNEL);
-                        err = -ENOMEM;
-                        if (NULL == mbuf)
-                                goto out_ext_ctrl;
-                        err = -EFAULT;
-                        if (copy_from_user(mbuf, user_ptr, ctrls_size))
-                                goto out_ext_ctrl;
-                        p->controls = mbuf;
-                }
-        }
-
-        /* Handles IOCTL */
-        err = __video_do_ioctl(inode, file, cmd, parg);
-        if (err == -ENOIOCTLCMD)
-                err = -EINVAL;
-        if (is_ext_ctrl) {
-                struct v4l2_ext_controls *p = parg;
-
-                p->controls = (void *)user_ptr;
-                if (p->count && err == 0 && copy_to_user(user_ptr, mbuf, ctrls_size))
-                        err = -EFAULT;
-                goto out_ext_ctrl;
-        }
-        if (err < 0)
-                goto out;
-
-out_ext_ctrl:
-        /*  Copy results into user buffer  */
-        switch (_IOC_DIR(cmd))
-        {
-        case _IOC_READ:
-        case (_IOC_WRITE | _IOC_READ):
-                if (copy_to_user((void __user *)arg, parg, _IOC_SIZE(cmd)))
-                        err = -EFAULT;
-                break;
-        }
-
-out:
-        kfree(mbuf);
-        return err;
-}
-EXPORT_SYMBOL(video_ioctl2);
-
-/**
- * get_index - assign stream number based on parent device
- * @vdev: video_device to assign index number to, vdev->dev should be assigned
- * @num: -1 if auto assign, requested number otherwise
- *
- *
- * returns -ENFILE if num is already in use, a free index number if
- * successful.
- */
-static int get_index(struct video_device *vdev, int num)
-{
-        u32 used = 0;
-        const int max_index = sizeof(used) * 8 - 1;
-        int i;
-
-        /* Currently a single v4l driver instance cannot create more than
-           32 devices.
-           Increase to u64 or an array of u32 if more are needed. */
-        if (num > max_index) {
-                printk(KERN_ERR "videodev: %s num is too large\n", __func__);
-                return -EINVAL;
-        }
-
-        for (i = 0; i < VIDEO_NUM_DEVICES; i++) {
-                if (video_device[i] != NULL &&
-                    video_device[i] != vdev &&
-                    video_device[i]->dev == vdev->dev) {
-                        used |= 1 << video_device[i]->index;
-                }
-        }
-
-        if (num >= 0) {
-                if (used & (1 << num))
-                        return -ENFILE;
-                return num;
-        }
-
-        i = ffz(used);
-        return i > max_index ? -ENFILE : i;
-}
-
-static const struct file_operations video_fops;
-
-int video_register_device(struct video_device *vfd, int type, int nr)
-{
-        return video_register_device_index(vfd, type, nr, -1);
-}
-EXPORT_SYMBOL(video_register_device);
-
-/**
- *      video_register_device - register video4linux devices
- *      @vfd:  video device structure we want to register
- *      @type: type of device to register
- *      @nr:   which device number (0 == /dev/video0, 1 == /dev/video1, ...
- *             -1 == first free)
- *
- *      The registration code assigns minor numbers based on the type
- *      requested. -ENFILE is returned in all the device slots for this
- *      category are full. If not then the minor field is set and the
- *      driver initialize function is called (if non %NULL).
- *
- *      Zero is returned on success.
- *
- *      Valid types are
- *
- *      %VFL_TYPE_GRABBER - A frame grabber
- *
- *      %VFL_TYPE_VTX - A teletext device
- *
- *      %VFL_TYPE_VBI - Vertical blank data (undecoded)
- *
- *      %VFL_TYPE_RADIO - A radio card
- */
-
-int video_register_device_index(struct video_device *vfd, int type, int nr,
-                                        int index)
-{
-        int i=0;
-        int base;
-        int end;
-        int ret;
-        char *name_base;
-
-        switch(type)
-        {
-                case VFL_TYPE_GRABBER:
-                        base=MINOR_VFL_TYPE_GRABBER_MIN;
-                        end=MINOR_VFL_TYPE_GRABBER_MAX+1;
-                        name_base = "video";
-                        break;
-                case VFL_TYPE_VTX:
-                        base=MINOR_VFL_TYPE_VTX_MIN;
-                        end=MINOR_VFL_TYPE_VTX_MAX+1;
-                        name_base = "vtx";
-                        break;
-                case VFL_TYPE_VBI:
-                        base=MINOR_VFL_TYPE_VBI_MIN;
-                        end=MINOR_VFL_TYPE_VBI_MAX+1;
-                        name_base = "vbi";
-                        break;
-                case VFL_TYPE_RADIO:
-                        base=MINOR_VFL_TYPE_RADIO_MIN;
-                        end=MINOR_VFL_TYPE_RADIO_MAX+1;
-                        name_base = "radio";
-                        break;
-                default:
-                        printk(KERN_ERR "%s called with unknown type: %d\n",
-                               __func__, type);
-                        return -1;
-        }
-
-        /* pick a minor number */
-        mutex_lock(&videodev_lock);
-        if (nr >= 0  &&  nr < end-base) {
-                /* use the one the driver asked for */
-                i = base+nr;
-                if (NULL != video_device[i]) {
-                        mutex_unlock(&videodev_lock);
-                        return -ENFILE;
-                }
-        } else {
-                /* use first free */
-                for(i=base;i<end;i++)
-                        if (NULL == video_device[i])
-                                break;
-                if (i == end) {
-                        mutex_unlock(&videodev_lock);
-                        return -ENFILE;
-                }
-        }
-        video_device[i]=vfd;
-        vfd->minor=i;
-
-        ret = get_index(vfd, index);
-        vfd->index = ret;
-
-        mutex_unlock(&videodev_lock);
-
-        if (ret < 0) {
-                printk(KERN_ERR "%s: get_index failed\n", __func__);
-                goto fail_minor;
-        }
-
-        mutex_init(&vfd->lock);
-
-        /* sysfs class */
-        memset(&vfd->class_dev, 0x00, sizeof(vfd->class_dev));
-        vfd->class_dev.class       = &video_class;
-        vfd->class_dev.devt        = MKDEV(VIDEO_MAJOR, vfd->minor);
-        if (vfd->dev)
-                vfd->class_dev.parent = vfd->dev;
-        sprintf(vfd->class_dev.bus_id, "%s%d", name_base, i - base);
-        ret = device_register(&vfd->class_dev);
-        if (ret < 0) {
-                printk(KERN_ERR "%s: device_register failed\n", __func__);
-                goto fail_minor;
-        }
-
-#if 1
-        /* needed until all drivers are fixed */
-        if (!vfd->release)
-                printk(KERN_WARNING "videodev: \"%s\" has no release callback. "
-                       "Please fix your driver for proper sysfs support, see "
-                       "http://lwn.net/Articles/36850/\n", vfd->name);
-#endif
-        return 0;
-
-fail_minor:
-        mutex_lock(&videodev_lock);
-        video_device[vfd->minor] = NULL;
-        vfd->minor = -1;
-        mutex_unlock(&videodev_lock);
-        return ret;
-}
-EXPORT_SYMBOL(video_register_device_index);
-
-/**
- *      video_unregister_device - unregister a video4linux device
- *      @vfd: the device to unregister
- *
- *      This unregisters the passed device and deassigns the minor
- *      number. Future open calls will be met with errors.
- */
-
-void video_unregister_device(struct video_device *vfd)
-{
-        mutex_lock(&videodev_lock);
-        if(video_device[vfd->minor]!=vfd)
-                panic("videodev: bad unregister");
-
-        video_device[vfd->minor]=NULL;
-        device_unregister(&vfd->class_dev);
-        mutex_unlock(&videodev_lock);
-}
-EXPORT_SYMBOL(video_unregister_device);
-
-/*
- * Video fs operations
- */
-static const struct file_operations video_fops=
-{
-        .owner          = THIS_MODULE,
-        .llseek         = no_llseek,
-        .open           = video_open,
-};
-
-/*
- *      Initialise video for linux
- */
-
-static int __init videodev_init(void)
-{
-        int ret;
-
-        printk(KERN_INFO "Linux video capture interface: v2.00\n");
-        if (register_chrdev(VIDEO_MAJOR, VIDEO_NAME, &video_fops)) {
-                printk(KERN_WARNING "video_dev: unable to get major %d\n", VIDEO_MAJOR);
-                return -EIO;
-        }
-
-        ret = class_register(&video_class);
-        if (ret < 0) {
-                unregister_chrdev(VIDEO_MAJOR, VIDEO_NAME);
-                printk(KERN_WARNING "video_dev: class_register failed\n");
-                return -EIO;
-        }
-
-        return 0;
-}
-
-static void __exit videodev_exit(void)
-{
-        class_unregister(&video_class);
-        unregister_chrdev(VIDEO_MAJOR, VIDEO_NAME);
-}
-
-module_init(videodev_init)
-module_exit(videodev_exit)
-
-MODULE_AUTHOR("Alan Cox, Mauro Carvalho Chehab <mchehab@infradead.org>");
-MODULE_DESCRIPTION("Device registrar for Video4Linux drivers v2");
-MODULE_LICENSE("GPL");
-
-
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
diff --git a/drivers/media/video/vino.c b/drivers/media/video/vino.c
index 01ea99c9bc1a..3989b0eded28 100644
--- a/drivers/media/video/vino.c
+++ b/drivers/media/video/vino.c
@@ -38,7 +38,7 @@
 #include <linux/i2c.h>
 #include <linux/i2c-algo-sgi.h>
 
-#include <linux/videodev.h>
+#include <linux/videodev2.h>
 #include <media/v4l2-common.h>
 #include <linux/video_decoder.h>
 #include <linux/mutex.h>
@@ -4385,8 +4385,6 @@ static const struct file_operations vino_fops = {
 
 static struct video_device v4l_device_template = {
         .name           = "NOT SET",
-        /*.type         = VID_TYPE_CAPTURE | VID_TYPE_SUBCAPTURE | */
-        /*      VID_TYPE_CLIPPING | VID_TYPE_SCALES, VID_TYPE_OVERLAY */
         .fops           = &vino_fops,
         .minor          = -1,
 };
diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c
index 059b01c11dc1..3518af071a2e 100644
--- a/drivers/media/video/vivi.c
+++ b/drivers/media/video/vivi.c
@@ -35,6 +35,7 @@
 #include <linux/interrupt.h>
 #include <media/videobuf-vmalloc.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <linux/kthread.h>
 #include <linux/highmem.h>
 #include <linux/freezer.h>
@@ -1065,13 +1066,7 @@ static const struct file_operations vivi_fops = {
         .llseek         = no_llseek,
 };
 
-static struct video_device vivi_template = {
-        .name           = "vivi",
-        .type           = VID_TYPE_CAPTURE,
-        .fops           = &vivi_fops,
-        .minor          = -1,
-        .release        = video_device_release,
-
+static const struct v4l2_ioctl_ops vivi_ioctl_ops = {
         .vidioc_querycap      = vidioc_querycap,
         .vidioc_enum_fmt_vid_cap  = vidioc_enum_fmt_vid_cap,
         .vidioc_g_fmt_vid_cap     = vidioc_g_fmt_vid_cap,
@@ -1093,6 +1088,15 @@ static struct video_device vivi_template = {
 #ifdef CONFIG_VIDEO_V4L1_COMPAT
         .vidiocgmbuf          = vidiocgmbuf,
 #endif
+};
+
+static struct video_device vivi_template = {
+        .name           = "vivi",
+        .fops           = &vivi_fops,
+        .ioctl_ops      = &vivi_ioctl_ops,
+        .minor          = -1,
+        .release        = video_device_release,
+
         .tvnorms              = V4L2_STD_525_60,
         .current_norm         = V4L2_STD_NTSC_M,
 };
diff --git a/drivers/media/video/vp27smpx.c b/drivers/media/video/vp27smpx.c
index cbecb3cbbbaa..577956c5410b 100644
--- a/drivers/media/video/vp27smpx.c
+++ b/drivers/media/video/vp27smpx.c
@@ -27,7 +27,7 @@
 #include <asm/uaccess.h>
 #include <linux/i2c.h>
 #include <linux/i2c-id.h>
-#include <linux/videodev.h>
+#include <linux/videodev2.h>
 #include <media/v4l2-common.h>
 #include <media/v4l2-chip-ident.h>
 #include <media/v4l2-i2c-drv.h>
diff --git a/drivers/media/video/w9966.c b/drivers/media/video/w9966.c
index 33f702698a56..9402f40095b4 100644
--- a/drivers/media/video/w9966.c
+++ b/drivers/media/video/w9966.c
@@ -57,8 +57,9 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/delay.h>
-#include <linux/videodev.h>
+#include <linux/videodev2.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <linux/parport.h>
 
 /*#define DEBUG*/                               /* Undef me for production */
@@ -195,9 +196,7 @@ static const struct file_operations w9966_fops = {
         .llseek         = no_llseek,
 };
 static struct video_device w9966_template = {
-        .owner          = THIS_MODULE,
         .name           = W9966_DRIVERNAME,
-        .type           = VID_TYPE_CAPTURE | VID_TYPE_SCALES,
         .fops           = &w9966_fops,
 };
 
diff --git a/drivers/media/video/w9968cf.c b/drivers/media/video/w9968cf.c
index 840522442d07..168baabe4659 100644
--- a/drivers/media/video/w9968cf.c
+++ b/drivers/media/video/w9968cf.c
@@ -42,6 +42,7 @@
 #include <asm/page.h>
 #include <asm/uaccess.h>
 #include <linux/page-flags.h>
+#include <media/v4l2-ioctl.h>
 
 #include "w9968cf.h"
 #include "w9968cf_decoder.h"
@@ -3549,13 +3550,11 @@ w9968cf_usb_probe(struct usb_interface* intf, const struct usb_device_id* id)
         }
 
         strcpy(cam->v4ldev->name, symbolic(camlist, mod_id));
-        cam->v4ldev->owner = THIS_MODULE;
-        cam->v4ldev->type = VID_TYPE_CAPTURE | VID_TYPE_SCALES;
         cam->v4ldev->fops = &w9968cf_fops;
         cam->v4ldev->minor = video_nr[dev_nr];
         cam->v4ldev->release = video_device_release;
         video_set_drvdata(cam->v4ldev, cam);
-        cam->v4ldev->dev = &cam->dev;
+        cam->v4ldev->parent = &cam->dev;
 
         err = video_register_device(cam->v4ldev, VFL_TYPE_GRABBER,
                                     video_nr[dev_nr]);
diff --git a/drivers/media/video/w9968cf.h b/drivers/media/video/w9968cf.h
index 3c95316bc030..30032e15e23c 100644
--- a/drivers/media/video/w9968cf.h
+++ b/drivers/media/video/w9968cf.h
@@ -21,7 +21,7 @@
 #ifndef _W9968CF_H_
 #define _W9968CF_H_
 
-#include <linux/videodev.h>
+#include <linux/videodev2.h>
 #include <linux/usb.h>
 #include <linux/i2c.h>
 #include <linux/device.h>
diff --git a/drivers/media/video/wm8739.c b/drivers/media/video/wm8739.c
index 7be47a255853..95c79ad80487 100644
--- a/drivers/media/video/wm8739.c
+++ b/drivers/media/video/wm8739.c
@@ -27,7 +27,7 @@
 #include <asm/uaccess.h>
 #include <linux/i2c.h>
 #include <linux/i2c-id.h>
-#include <linux/videodev.h>
+#include <linux/videodev2.h>
 #include <media/v4l2-common.h>
 #include <media/v4l2-chip-ident.h>
 #include <media/v4l2-i2c-drv.h>
diff --git a/drivers/media/video/wm8775.c b/drivers/media/video/wm8775.c
index c2ab70a04a74..48df661d4fc3 100644
--- a/drivers/media/video/wm8775.c
+++ b/drivers/media/video/wm8775.c
@@ -31,7 +31,7 @@
 #include <asm/uaccess.h>
 #include <linux/i2c.h>
 #include <linux/i2c-id.h>
-#include <linux/videodev.h>
+#include <linux/videodev2.h>
 #include <media/v4l2-common.h>
 #include <media/v4l2-chip-ident.h>
 #include <media/v4l2-i2c-drv-legacy.h>
diff --git a/drivers/media/video/zc0301/zc0301.h b/drivers/media/video/zc0301/zc0301.h
index 7bbab541a309..b1b5cceb4baa 100644
--- a/drivers/media/video/zc0301/zc0301.h
+++ b/drivers/media/video/zc0301/zc0301.h
@@ -25,6 +25,7 @@
 #include <linux/usb.h>
 #include <linux/videodev2.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <linux/device.h>
 #include <linux/list.h>
 #include <linux/spinlock.h>
diff --git a/drivers/media/video/zc0301/zc0301_core.c b/drivers/media/video/zc0301/zc0301_core.c
index e5c4e9f5193f..550ce7bd5c87 100644
--- a/drivers/media/video/zc0301/zc0301_core.c
+++ b/drivers/media/video/zc0301/zc0301_core.c
@@ -1985,8 +1985,6 @@ zc0301_usb_probe(struct usb_interface* intf, const struct usb_device_id* id)
         }
 
         strcpy(cam->v4ldev->name, "ZC0301[P] PC Camera");
-        cam->v4ldev->owner = THIS_MODULE;
-        cam->v4ldev->type = VID_TYPE_CAPTURE | VID_TYPE_SCALES;
         cam->v4ldev->fops = &zc0301_fops;
         cam->v4ldev->minor = video_nr[dev_nr];
         cam->v4ldev->release = video_device_release;
diff --git a/drivers/media/video/zoran_card.c b/drivers/media/video/zoran_card.c
index 0929edb2d4f1..d842a7cb99d2 100644
--- a/drivers/media/video/zoran_card.c
+++ b/drivers/media/video/zoran_card.c
@@ -161,7 +161,7 @@ static struct pci_device_id zr36067_pci_tbl[] = {
 MODULE_DEVICE_TABLE(pci, zr36067_pci_tbl);
 
 int zoran_num;                  /* number of Buzs in use */
-struct zoran zoran[BUZ_MAX];
+struct zoran *zoran[BUZ_MAX];
 
 /* videocodec bus functions ZR36060 */
 static u32
@@ -355,9 +355,15 @@ i2cid_to_modulename (u16 i2c_id)
         case I2C_DRIVERID_BT856:
                 name = "bt856";
                 break;
+        case I2C_DRIVERID_BT866:
+                name = "bt866";
+                break;
         case I2C_DRIVERID_VPX3220:
                 name = "vpx3220";
                 break;
+        case I2C_DRIVERID_KS0127:
+                name = "ks0127";
+                break;
         }
 
         return name;
@@ -1164,7 +1170,7 @@ static void
 zoran_release (struct zoran *zr)
 {
         if (!zr->initialized)
-                return;
+                goto exit_free;
         /* unregister videocodec bus */
         if (zr->codec) {
                 struct videocodec_master *master = zr->codec->master_data;
@@ -1192,6 +1198,8 @@ zoran_release (struct zoran *zr)
         iounmap(zr->zr36057_mem);
         pci_disable_device(zr->pci_dev);
         video_unregister_device(zr->video_dev);
+exit_free:
+        kfree(zr);
 }
 
 void
@@ -1269,8 +1277,14 @@ find_zr36057 (void)
         while (zoran_num < BUZ_MAX &&
                (dev = pci_get_device(PCI_VENDOR_ID_ZORAN, PCI_DEVICE_ID_ZORAN_36057, dev)) != NULL) {
                 card_num = card[zoran_num];
-                zr = &zoran[zoran_num];
-                memset(zr, 0, sizeof(struct zoran));    // Just in case if previous cycle failed
+                zr = kzalloc(sizeof(struct zoran), GFP_KERNEL);
+                if (!zr) {
+                        dprintk(1,
+                                KERN_ERR
+                                "%s: find_zr36057() - kzalloc failed\n",
+                                ZORAN_NAME);
+                        continue;
+                }
                 zr->pci_dev = dev;
                 //zr->zr36057_mem = NULL;
                 zr->id = zoran_num;
@@ -1278,7 +1292,7 @@ find_zr36057 (void)
                 spin_lock_init(&zr->spinlock);
                 mutex_init(&zr->resource_lock);
                 if (pci_enable_device(dev))
-                        continue;
+                        goto zr_free_mem;
                 zr->zr36057_adr = pci_resource_start(zr->pci_dev, 0);
                 pci_read_config_byte(zr->pci_dev, PCI_CLASS_REVISION,
                                      &zr->revision);
@@ -1294,7 +1308,7 @@ find_zr36057 (void)
                                         KERN_ERR
                                         "%s: find_zr36057() - no card specified, please use the card=X insmod option\n",
                                         ZR_DEVNAME(zr));
-                                continue;
+                                goto zr_free_mem;
                         }
                 } else {
                         int i;
@@ -1333,7 +1347,7 @@ find_zr36057 (void)
                                                 KERN_ERR
                                                 "%s: find_zr36057() - unknown card\n",
                                                 ZR_DEVNAME(zr));
-                                        continue;
+                                        goto zr_free_mem;
                                 }
                         }
                 }
@@ -1343,7 +1357,7 @@ find_zr36057 (void)
                                 KERN_ERR
                                 "%s: find_zr36057() - invalid cardnum %d\n",
                                 ZR_DEVNAME(zr), card_num);
-                        continue;
+                        goto zr_free_mem;
                 }
 
                 /* even though we make this a non pointer and thus
@@ -1361,7 +1375,7 @@ find_zr36057 (void)
                                 KERN_ERR
                                 "%s: find_zr36057() - ioremap failed\n",
                                 ZR_DEVNAME(zr));
-                        continue;
+                        goto zr_free_mem;
                 }
 
                 result = request_irq(zr->pci_dev->irq,
@@ -1530,7 +1544,7 @@ find_zr36057 (void)
                 }
                 /* Success so keep the pci_dev referenced */
                 pci_dev_get(zr->pci_dev);
-                zoran_num++;
+                zoran[zoran_num++] = zr;
                 continue;
 
                 // Init errors
@@ -1549,6 +1563,8 @@ find_zr36057 (void)
                 free_irq(zr->pci_dev->irq, zr);
               zr_unmap:
                 iounmap(zr->zr36057_mem);
+              zr_free_mem:
+                kfree(zr);
                 continue;
         }
         if (dev)        /* Clean up ref count on early exit */
@@ -1620,7 +1636,7 @@ init_dc10_cards (void)
 
         /* take care of Natoma chipset and a revision 1 zr36057 */
         for (i = 0; i < zoran_num; i++) {
-                struct zoran *zr = &zoran[i];
+                struct zoran *zr = zoran[i];
 
                 if ((pci_pci_problems & PCIPCI_NATOMA) && zr->revision <= 1) {
                         zr->jpg_buffers.need_contiguous = 1;
@@ -1632,7 +1648,7 @@ init_dc10_cards (void)
 
                 if (zr36057_init(zr) < 0) {
                         for (i = 0; i < zoran_num; i++)
-                                zoran_release(&zoran[i]);
+                                zoran_release(zoran[i]);
                         return -EIO;
                 }
                 zoran_proc_init(zr);
@@ -1647,7 +1663,7 @@ unload_dc10_cards (void)
         int i;
 
         for (i = 0; i < zoran_num; i++)
-                zoran_release(&zoran[i]);
+                zoran_release(zoran[i]);
 }
 
 module_init(init_dc10_cards);
diff --git a/drivers/media/video/zoran_card.h b/drivers/media/video/zoran_card.h
index 1b5c4171cf9c..e4dc9d29b404 100644
--- a/drivers/media/video/zoran_card.h
+++ b/drivers/media/video/zoran_card.h
@@ -41,7 +41,7 @@ extern int zr36067_debug;
 /* Anybody who uses more than four? */
 #define BUZ_MAX 4
 extern int zoran_num;
-extern struct zoran zoran[BUZ_MAX];
+extern struct zoran *zoran[BUZ_MAX];
 
 extern struct video_device zoran_template;
 
diff --git a/drivers/media/video/zoran_driver.c b/drivers/media/video/zoran_driver.c
index c0675921fe20..ec6f59674b10 100644
--- a/drivers/media/video/zoran_driver.c
+++ b/drivers/media/video/zoran_driver.c
@@ -71,6 +71,7 @@
 
 #include <linux/videodev.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include "videocodec.h"
 
 #include <asm/byteorder.h>
@@ -1212,8 +1213,8 @@ zoran_open (struct inode *inode,
 
         /* find the device */
         for (i = 0; i < zoran_num; i++) {
-                if (zoran[i].video_dev->minor == minor) {
-                        zr = &zoran[i];
+                if (zoran[i]->video_dev->minor == minor) {
+                        zr = zoran[i];
                         break;
                 }
         }
@@ -4643,8 +4644,6 @@ static const struct file_operations zoran_fops = {
 
 struct video_device zoran_template __devinitdata = {
         .name = ZORAN_NAME,
-        .type = ZORAN_VID_TYPE,
-        .type2 = ZORAN_V4L2_VID_FLAGS,
         .fops = &zoran_fops,
         .release = &zoran_vdev_release,
         .minor = -1
diff --git a/drivers/media/video/zr364xx.c b/drivers/media/video/zr364xx.c
index 485df2e36132..18d1c4ba79fb 100644
--- a/drivers/media/video/zr364xx.c
+++ b/drivers/media/video/zr364xx.c
@@ -35,6 +35,7 @@
 #include <linux/proc_fs.h>
 #include <linux/highmem.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 
 
 /* Version Information */
@@ -761,14 +762,7 @@ static const struct file_operations zr364xx_fops = {
         .llseek = no_llseek,
 };
 
-static struct video_device zr364xx_template = {
-        .owner = THIS_MODULE,
-        .name = DRIVER_DESC,
-        .type = VID_TYPE_CAPTURE,
-        .fops = &zr364xx_fops,
-        .release = video_device_release,
-        .minor = -1,
-
+static const struct v4l2_ioctl_ops zr364xx_ioctl_ops = {
         .vidioc_querycap        = zr364xx_vidioc_querycap,
         .vidioc_enum_fmt_vid_cap = zr364xx_vidioc_enum_fmt_vid_cap,
         .vidioc_try_fmt_vid_cap = zr364xx_vidioc_try_fmt_vid_cap,
@@ -784,6 +778,14 @@ static struct video_device zr364xx_template = {
         .vidioc_s_ctrl          = zr364xx_vidioc_s_ctrl,
 };
 
+static struct video_device zr364xx_template = {
+        .name = DRIVER_DESC,
+        .fops = &zr364xx_fops,
+        .ioctl_ops = &zr364xx_ioctl_ops,
+        .release = video_device_release,
+        .minor = -1,
+};
+
 
 
 /*******************/
diff --git a/drivers/mfd/mfd-core.c b/drivers/mfd/mfd-core.c
index 0454be4266c1..9c9c126ed334 100644
--- a/drivers/mfd/mfd-core.c
+++ b/drivers/mfd/mfd-core.c
@@ -15,24 +15,24 @@
 #include <linux/platform_device.h>
 #include <linux/mfd/core.h>
 
-static int mfd_add_device(struct platform_device *parent,
-                const struct mfd_cell *cell,
-                struct resource *mem_base,
-                int irq_base)
+static int mfd_add_device(struct device *parent, int id,
+                          const struct mfd_cell *cell,
+                          struct resource *mem_base,
+                          int irq_base)
 {
         struct resource res[cell->num_resources];
         struct platform_device *pdev;
         int ret = -ENOMEM;
         int r;
 
-        pdev = platform_device_alloc(cell->name, parent->id);
+        pdev = platform_device_alloc(cell->name, id);
         if (!pdev)
                 goto fail_alloc;
 
-        pdev->dev.parent = &parent->dev;
+        pdev->dev.parent = parent;
 
         ret = platform_device_add_data(pdev,
-                        cell, sizeof(struct mfd_cell));
+                        cell->platform_data, cell->data_size);
         if (ret)
                 goto fail_device;
 
@@ -75,17 +75,16 @@ fail_alloc:
         return ret;
 }
 
-int mfd_add_devices(
-                struct platform_device *parent,
-                const struct mfd_cell *cells, int n_devs,
-                struct resource *mem_base,
-                int irq_base)
+int mfd_add_devices(struct device *parent, int id,
+                    const struct mfd_cell *cells, int n_devs,
+                    struct resource *mem_base,
+                    int irq_base)
 {
         int i;
         int ret = 0;
 
         for (i = 0; i < n_devs; i++) {
-                ret = mfd_add_device(parent, cells + i, mem_base, irq_base);
+                ret = mfd_add_device(parent, id, cells + i, mem_base, irq_base);
                 if (ret)
                         break;
         }
@@ -99,14 +98,13 @@ EXPORT_SYMBOL(mfd_add_devices);
 
 static int mfd_remove_devices_fn(struct device *dev, void *unused)
 {
-        platform_device_unregister(
-                        container_of(dev, struct platform_device, dev));
+        platform_device_unregister(to_platform_device(dev));
         return 0;
 }
 
-void mfd_remove_devices(struct platform_device *parent)
+void mfd_remove_devices(struct device *parent)
 {
-        device_for_each_child(&parent->dev, NULL, mfd_remove_devices_fn);
+        device_for_each_child(parent, NULL, mfd_remove_devices_fn);
 }
 EXPORT_SYMBOL(mfd_remove_devices);
 
diff --git a/drivers/mfd/tc6393xb.c b/drivers/mfd/tc6393xb.c
index 94e55e8e7ce6..f4fd797c1590 100644
--- a/drivers/mfd/tc6393xb.c
+++ b/drivers/mfd/tc6393xb.c
@@ -466,8 +466,12 @@ static int __devinit tc6393xb_probe(struct platform_device *dev)
                 tc6393xb_attach_irq(dev);
 
         tc6393xb_cells[TC6393XB_CELL_NAND].driver_data = tcpd->nand_data;
+        tc6393xb_cells[TC6393XB_CELL_NAND].platform_data =
+                &tc6393xb_cells[TC6393XB_CELL_NAND];
+        tc6393xb_cells[TC6393XB_CELL_NAND].data_size =
+                sizeof(tc6393xb_cells[TC6393XB_CELL_NAND]);
 
-        retval = mfd_add_devices(dev,
+        retval = mfd_add_devices(&dev->dev, dev->id,
                         tc6393xb_cells, ARRAY_SIZE(tc6393xb_cells),
                         iomem, tcpd->irq_base);
 
@@ -501,7 +505,7 @@ static int __devexit tc6393xb_remove(struct platform_device *dev)
         struct tc6393xb *tc6393xb = platform_get_drvdata(dev);
         int ret;
 
-        mfd_remove_devices(dev);
+        mfd_remove_devices(&dev->dev);
 
         if (tc6393xb->irq)
                 tc6393xb_detach_irq(dev);
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index f5ade1904aad..fa50e9ede0e6 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -426,7 +426,7 @@ config ENCLOSURE_SERVICES
 
 config SGI_XP
         tristate "Support communication between SGI SSIs"
-        depends on IA64_GENERIC || IA64_SGI_SN2
+        depends on IA64_GENERIC || IA64_SGI_SN2 || IA64_SGI_UV || (X86_64 && SMP)
         select IA64_UNCACHED_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2
         select GENERIC_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2
         ---help---
@@ -450,4 +450,27 @@ config HP_ILO
           To compile this driver as a module, choose M here: the
           module will be called hpilo.
 
+config SGI_GRU
+        tristate "SGI GRU driver"
+        depends on (X86_64 || IA64_SGI_UV || IA64_GENERIC) && SMP
+        default n
+        select MMU_NOTIFIER
+        ---help---
+        The GRU is a hardware resource located in the system chipset. The GRU
+        contains memory that can be mmapped into the user address space. This memory is
+        used to communicate with the GRU to perform functions such as load/store,
+        scatter/gather, bcopy, AMOs, etc.  The GRU is directly accessed by user
+        instructions using user virtual addresses. GRU instructions (ex., bcopy) use
+        user virtual addresses for operands.
+
+        If you are not running on a SGI UV system, say N.
+
+config SGI_GRU_DEBUG
+        bool  "SGI GRU driver debug"
+        depends on SGI_GRU
+        default n
+        ---help---
+        This option enables addition debugging code for the SGI GRU driver. If
+        you are unsure, say N.
+
 endif # MISC_DEVICES
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index f5e273420c09..c6c13f60b452 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -28,4 +28,5 @@ obj-$(CONFIG_INTEL_MENLOW)	+= intel_menlow.o
 obj-$(CONFIG_ENCLOSURE_SERVICES) += enclosure.o
 obj-$(CONFIG_KGDB_TESTS)        += kgdbts.o
 obj-$(CONFIG_SGI_XP)            += sgi-xp/
+obj-$(CONFIG_SGI_GRU)           += sgi-gru/
 obj-$(CONFIG_HP_ILO)            += hpilo.o
diff --git a/drivers/misc/sgi-gru/Makefile b/drivers/misc/sgi-gru/Makefile
new file mode 100644
index 000000000000..d03597a521b0
--- /dev/null
+++ b/drivers/misc/sgi-gru/Makefile
@@ -0,0 +1,3 @@
+obj-$(CONFIG_SGI_GRU) := gru.o
+gru-y := grufile.o grumain.o grufault.o grutlbpurge.o gruprocfs.o grukservices.o
+
diff --git a/drivers/misc/sgi-gru/gru.h b/drivers/misc/sgi-gru/gru.h
new file mode 100644
index 000000000000..40df7cb3f0a5
--- /dev/null
+++ b/drivers/misc/sgi-gru/gru.h
@@ -0,0 +1,67 @@
+/*
+ *  Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU Lesser General Public License as published by
+ *  the Free Software Foundation; either version 2.1 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU Lesser General Public License for more details.
+ *
+ *  You should have received a copy of the GNU Lesser General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef __GRU_H__
+#define __GRU_H__
+
+/*
+ * GRU architectural definitions
+ */
+#define GRU_CACHE_LINE_BYTES            64
+#define GRU_HANDLE_STRIDE               256
+#define GRU_CB_BASE                     0
+#define GRU_DS_BASE                     0x20000
+
+/*
+ * Size used to map GRU GSeg
+ */
+#if defined CONFIG_IA64
+#define GRU_GSEG_PAGESIZE       (256 * 1024UL)
+#elif defined CONFIG_X86_64
+#define GRU_GSEG_PAGESIZE       (256 * 1024UL)          /* ZZZ 2MB ??? */
+#else
+#error "Unsupported architecture"
+#endif
+
+/*
+ * Structure for obtaining GRU resource information
+ */
+struct gru_chiplet_info {
+        int     node;
+        int     chiplet;
+        int     blade;
+        int     total_dsr_bytes;
+        int     total_cbr;
+        int     total_user_dsr_bytes;
+        int     total_user_cbr;
+        int     free_user_dsr_bytes;
+        int     free_user_cbr;
+};
+
+/* Flags for GRU options on the gru_create_context() call */
+/* Select one of the follow 4 options to specify how TLB misses are handled */
+#define GRU_OPT_MISS_DEFAULT    0x0000  /* Use default mode */
+#define GRU_OPT_MISS_USER_POLL  0x0001  /* User will poll CB for faults */
+#define GRU_OPT_MISS_FMM_INTR   0x0002  /* Send interrupt to cpu to
+                                           handle fault */
+#define GRU_OPT_MISS_FMM_POLL   0x0003  /* Use system polling thread */
+#define GRU_OPT_MISS_MASK       0x0003  /* Mask for TLB MISS option */
+
+
+
+#endif          /* __GRU_H__ */
diff --git a/drivers/misc/sgi-gru/gru_instructions.h b/drivers/misc/sgi-gru/gru_instructions.h
new file mode 100644
index 000000000000..0dc36225c7c6
--- /dev/null
+++ b/drivers/misc/sgi-gru/gru_instructions.h
@@ -0,0 +1,669 @@
+/*
+ *  Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU Lesser General Public License as published by
+ *  the Free Software Foundation; either version 2.1 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU Lesser General Public License for more details.
+ *
+ *  You should have received a copy of the GNU Lesser General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef __GRU_INSTRUCTIONS_H__
+#define __GRU_INSTRUCTIONS_H__
+
+#define gru_flush_cache_hook(p)
+#define gru_emulator_wait_hook(p, w)
+
+/*
+ * Architecture dependent functions
+ */
+
+#if defined CONFIG_IA64
+#include <linux/compiler.h>
+#include <asm/intrinsics.h>
+#define __flush_cache(p)                ia64_fc(p)
+/* Use volatile on IA64 to ensure ordering via st4.rel */
+#define gru_ordered_store_int(p,v)                                      \
+                do {                                                    \
+                        barrier();                                      \
+                        *((volatile int *)(p)) = v; /* force st.rel */  \
+                } while (0)
+#elif defined CONFIG_X86_64
+#define __flush_cache(p)                clflush(p)
+#define gru_ordered_store_int(p,v)                                      \
+                do {                                                    \
+                        barrier();                                      \
+                        *(int *)p = v;                                  \
+                } while (0)
+#else
+#error "Unsupported architecture"
+#endif
+
+/*
+ * Control block status and exception codes
+ */
+#define CBS_IDLE                        0
+#define CBS_EXCEPTION                   1
+#define CBS_ACTIVE                      2
+#define CBS_CALL_OS                     3
+
+/* CB substatus bitmasks */
+#define CBSS_MSG_QUEUE_MASK             7
+#define CBSS_IMPLICIT_ABORT_ACTIVE_MASK 8
+
+/* CB substatus message queue values (low 3 bits of substatus) */
+#define CBSS_NO_ERROR                   0
+#define CBSS_LB_OVERFLOWED              1
+#define CBSS_QLIMIT_REACHED             2
+#define CBSS_PAGE_OVERFLOW              3
+#define CBSS_AMO_NACKED                 4
+#define CBSS_PUT_NACKED                 5
+
+/*
+ * Structure used to fetch exception detail for CBs that terminate with
+ * CBS_EXCEPTION
+ */
+struct control_block_extended_exc_detail {
+        unsigned long   cb;
+        int             opc;
+        int             ecause;
+        int             exopc;
+        long            exceptdet0;
+        int             exceptdet1;
+};
+
+/*
+ * Instruction formats
+ */
+
+/*
+ * Generic instruction format.
+ * This definition has precise bit field definitions.
+ */
+struct gru_instruction_bits {
+    /* DW 0  - low */
+    unsigned int                icmd:      1;
+    unsigned char               ima:       3;   /* CB_DelRep, unmapped mode */
+    unsigned char               reserved0: 4;
+    unsigned int                xtype:     3;
+    unsigned int                iaa0:      2;
+    unsigned int                iaa1:      2;
+    unsigned char               reserved1: 1;
+    unsigned char               opc:       8;   /* opcode */
+    unsigned char               exopc:     8;   /* extended opcode */
+    /* DW 0  - high */
+    unsigned int                idef2:    22;   /* TRi0 */
+    unsigned char               reserved2: 2;
+    unsigned char               istatus:   2;
+    unsigned char               isubstatus:4;
+    unsigned char               reserved3: 2;
+    /* DW 1 */
+    unsigned long               idef4;          /* 42 bits: TRi1, BufSize */
+    /* DW 2-6 */
+    unsigned long               idef1;          /* BAddr0 */
+    unsigned long               idef5;          /* Nelem */
+    unsigned long               idef6;          /* Stride, Operand1 */
+    unsigned long               idef3;          /* BAddr1, Value, Operand2 */
+    unsigned long               reserved4;
+    /* DW 7 */
+    unsigned long               avalue;          /* AValue */
+};
+
+/*
+ * Generic instruction with friendlier names. This format is used
+ * for inline instructions.
+ */
+struct gru_instruction {
+    /* DW 0 */
+    unsigned int                op32;    /* icmd,xtype,iaa0,ima,opc */
+    unsigned int                tri0;
+    unsigned long               tri1_bufsize;           /* DW 1 */
+    unsigned long               baddr0;                 /* DW 2 */
+    unsigned long               nelem;                  /* DW 3 */
+    unsigned long               op1_stride;             /* DW 4 */
+    unsigned long               op2_value_baddr1;       /* DW 5 */
+    unsigned long               reserved0;              /* DW 6 */
+    unsigned long               avalue;                 /* DW 7 */
+};
+
+/* Some shifts and masks for the low 32 bits of a GRU command */
+#define GRU_CB_ICMD_SHFT        0
+#define GRU_CB_ICMD_MASK        0x1
+#define GRU_CB_XTYPE_SHFT       8
+#define GRU_CB_XTYPE_MASK       0x7
+#define GRU_CB_IAA0_SHFT        11
+#define GRU_CB_IAA0_MASK        0x3
+#define GRU_CB_IAA1_SHFT        13
+#define GRU_CB_IAA1_MASK        0x3
+#define GRU_CB_IMA_SHFT         1
+#define GRU_CB_IMA_MASK         0x3
+#define GRU_CB_OPC_SHFT         16
+#define GRU_CB_OPC_MASK         0xff
+#define GRU_CB_EXOPC_SHFT       24
+#define GRU_CB_EXOPC_MASK       0xff
+
+/* GRU instruction opcodes (opc field) */
+#define OP_NOP          0x00
+#define OP_BCOPY        0x01
+#define OP_VLOAD        0x02
+#define OP_IVLOAD       0x03
+#define OP_VSTORE       0x04
+#define OP_IVSTORE      0x05
+#define OP_VSET         0x06
+#define OP_IVSET        0x07
+#define OP_MESQ         0x08
+#define OP_GAMXR        0x09
+#define OP_GAMIR        0x0a
+#define OP_GAMIRR       0x0b
+#define OP_GAMER        0x0c
+#define OP_GAMERR       0x0d
+#define OP_BSTORE       0x0e
+#define OP_VFLUSH       0x0f
+
+
+/* Extended opcodes values (exopc field) */
+
+/* GAMIR - AMOs with implicit operands */
+#define EOP_IR_FETCH    0x01 /* Plain fetch of memory */
+#define EOP_IR_CLR      0x02 /* Fetch and clear */
+#define EOP_IR_INC      0x05 /* Fetch and increment */
+#define EOP_IR_DEC      0x07 /* Fetch and decrement */
+#define EOP_IR_QCHK1    0x0d /* Queue check, 64 byte msg */
+#define EOP_IR_QCHK2    0x0e /* Queue check, 128 byte msg */
+
+/* GAMIRR - Registered AMOs with implicit operands */
+#define EOP_IRR_FETCH   0x01 /* Registered fetch of memory */
+#define EOP_IRR_CLR     0x02 /* Registered fetch and clear */
+#define EOP_IRR_INC     0x05 /* Registered fetch and increment */
+#define EOP_IRR_DEC     0x07 /* Registered fetch and decrement */
+#define EOP_IRR_DECZ    0x0f /* Registered fetch and decrement, update on zero*/
+
+/* GAMER - AMOs with explicit operands */
+#define EOP_ER_SWAP     0x00 /* Exchange argument and memory */
+#define EOP_ER_OR       0x01 /* Logical OR with memory */
+#define EOP_ER_AND      0x02 /* Logical AND with memory */
+#define EOP_ER_XOR      0x03 /* Logical XOR with memory */
+#define EOP_ER_ADD      0x04 /* Add value to memory */
+#define EOP_ER_CSWAP    0x08 /* Compare with operand2, write operand1 if match*/
+#define EOP_ER_CADD     0x0c /* Queue check, operand1*64 byte msg */
+
+/* GAMERR - Registered AMOs with explicit operands */
+#define EOP_ERR_SWAP    0x00 /* Exchange argument and memory */
+#define EOP_ERR_OR      0x01 /* Logical OR with memory */
+#define EOP_ERR_AND     0x02 /* Logical AND with memory */
+#define EOP_ERR_XOR     0x03 /* Logical XOR with memory */
+#define EOP_ERR_ADD     0x04 /* Add value to memory */
+#define EOP_ERR_CSWAP   0x08 /* Compare with operand2, write operand1 if match*/
+#define EOP_ERR_EPOLL   0x09 /* Poll for equality */
+#define EOP_ERR_NPOLL   0x0a /* Poll for inequality */
+
+/* GAMXR - SGI Arithmetic unit */
+#define EOP_XR_CSWAP    0x0b /* Masked compare exchange */
+
+
+/* Transfer types (xtype field) */
+#define XTYPE_B         0x0     /* byte */
+#define XTYPE_S         0x1     /* short (2-byte) */
+#define XTYPE_W         0x2     /* word (4-byte) */
+#define XTYPE_DW        0x3     /* doubleword (8-byte) */
+#define XTYPE_CL        0x6     /* cacheline (64-byte) */
+
+
+/* Instruction access attributes (iaa0, iaa1 fields) */
+#define IAA_RAM         0x0     /* normal cached RAM access */
+#define IAA_NCRAM       0x2     /* noncoherent RAM access */
+#define IAA_MMIO        0x1     /* noncoherent memory-mapped I/O space */
+#define IAA_REGISTER    0x3     /* memory-mapped registers, etc. */
+
+
+/* Instruction mode attributes (ima field) */
+#define IMA_MAPPED      0x0     /* Virtual mode  */
+#define IMA_CB_DELAY    0x1     /* hold read responses until status changes */
+#define IMA_UNMAPPED    0x2     /* bypass the TLBs (OS only) */
+#define IMA_INTERRUPT   0x4     /* Interrupt when instruction completes */
+
+/* CBE ecause bits */
+#define CBE_CAUSE_RI                            (1 << 0)
+#define CBE_CAUSE_INVALID_INSTRUCTION           (1 << 1)
+#define CBE_CAUSE_UNMAPPED_MODE_FORBIDDEN       (1 << 2)
+#define CBE_CAUSE_PE_CHECK_DATA_ERROR           (1 << 3)
+#define CBE_CAUSE_IAA_GAA_MISMATCH              (1 << 4)
+#define CBE_CAUSE_DATA_SEGMENT_LIMIT_EXCEPTION  (1 << 5)
+#define CBE_CAUSE_OS_FATAL_TLB_FAULT            (1 << 6)
+#define CBE_CAUSE_EXECUTION_HW_ERROR            (1 << 7)
+#define CBE_CAUSE_TLBHW_ERROR                   (1 << 8)
+#define CBE_CAUSE_RA_REQUEST_TIMEOUT            (1 << 9)
+#define CBE_CAUSE_HA_REQUEST_TIMEOUT            (1 << 10)
+#define CBE_CAUSE_RA_RESPONSE_FATAL             (1 << 11)
+#define CBE_CAUSE_RA_RESPONSE_NON_FATAL         (1 << 12)
+#define CBE_CAUSE_HA_RESPONSE_FATAL             (1 << 13)
+#define CBE_CAUSE_HA_RESPONSE_NON_FATAL         (1 << 14)
+#define CBE_CAUSE_ADDRESS_SPACE_DECODE_ERROR    (1 << 15)
+#define CBE_CAUSE_RESPONSE_DATA_ERROR           (1 << 16)
+#define CBE_CAUSE_PROTOCOL_STATE_DATA_ERROR     (1 << 17)
+
+/*
+ * Exceptions are retried for the following cases. If any OTHER bits are set
+ * in ecause, the exception is not retryable.
+ */
+#define EXCEPTION_RETRY_BITS (CBE_CAUSE_RESPONSE_DATA_ERROR |           \
+                              CBE_CAUSE_RA_REQUEST_TIMEOUT |            \
+                              CBE_CAUSE_TLBHW_ERROR |                   \
+                              CBE_CAUSE_HA_REQUEST_TIMEOUT)
+
+/* Message queue head structure */
+union gru_mesqhead {
+        unsigned long   val;
+        struct {
+                unsigned int    head;
+                unsigned int    limit;
+        };
+};
+
+
+/* Generate the low word of a GRU instruction */
+static inline unsigned int
+__opword(unsigned char opcode, unsigned char exopc, unsigned char xtype,
+       unsigned char iaa0, unsigned char iaa1,
+       unsigned char ima)
+{
+    return (1 << GRU_CB_ICMD_SHFT) |
+           (iaa0 << GRU_CB_IAA0_SHFT) |
+           (iaa1 << GRU_CB_IAA1_SHFT) |
+           (ima << GRU_CB_IMA_SHFT) |
+           (xtype << GRU_CB_XTYPE_SHFT) |
+           (opcode << GRU_CB_OPC_SHFT) |
+           (exopc << GRU_CB_EXOPC_SHFT);
+}
+
+/*
+ * Architecture specific intrinsics
+ */
+static inline void gru_flush_cache(void *p)
+{
+        __flush_cache(p);
+}
+
+/*
+ * Store the lower 32 bits of the command including the "start" bit. Then
+ * start the instruction executing.
+ */
+static inline void gru_start_instruction(struct gru_instruction *ins, int op32)
+{
+        gru_ordered_store_int(ins, op32);
+}
+
+
+/* Convert "hints" to IMA */
+#define CB_IMA(h)               ((h) | IMA_UNMAPPED)
+
+/* Convert data segment cache line index into TRI0 / TRI1 value */
+#define GRU_DINDEX(i)           ((i) * GRU_CACHE_LINE_BYTES)
+
+/* Inline functions for GRU instructions.
+ *     Note:
+ *      - nelem and stride are in elements
+ *      - tri0/tri1 is in bytes for the beginning of the data segment.
+ */
+static inline void gru_vload(void *cb, unsigned long mem_addr,
+                unsigned int tri0, unsigned char xtype, unsigned long nelem,
+                unsigned long stride, unsigned long hints)
+{
+        struct gru_instruction *ins = (struct gru_instruction *)cb;
+
+        ins->baddr0 = (long)mem_addr;
+        ins->nelem = nelem;
+        ins->tri0 = tri0;
+        ins->op1_stride = stride;
+        gru_start_instruction(ins, __opword(OP_VLOAD, 0, xtype, IAA_RAM, 0,
+                                        CB_IMA(hints)));
+}
+
+static inline void gru_vstore(void *cb, unsigned long mem_addr,
+                unsigned int tri0, unsigned char xtype, unsigned long nelem,
+                unsigned long stride, unsigned long hints)
+{
+        struct gru_instruction *ins = (void *)cb;
+
+        ins->baddr0 = (long)mem_addr;
+        ins->nelem = nelem;
+        ins->tri0 = tri0;
+        ins->op1_stride = stride;
+        gru_start_instruction(ins, __opword(OP_VSTORE, 0, xtype, IAA_RAM, 0,
+                                        CB_IMA(hints)));
+}
+
+static inline void gru_ivload(void *cb, unsigned long mem_addr,
+                unsigned int tri0, unsigned int tri1, unsigned char xtype,
+                unsigned long nelem, unsigned long hints)
+{
+        struct gru_instruction *ins = (void *)cb;
+
+        ins->baddr0 = (long)mem_addr;
+        ins->nelem = nelem;
+        ins->tri0 = tri0;
+        ins->tri1_bufsize = tri1;
+        gru_start_instruction(ins, __opword(OP_IVLOAD, 0, xtype, IAA_RAM, 0,
+                                        CB_IMA(hints)));
+}
+
+static inline void gru_ivstore(void *cb, unsigned long mem_addr,
+                unsigned int tri0, unsigned int tri1,
+                unsigned char xtype, unsigned long nelem, unsigned long hints)
+{
+        struct gru_instruction *ins = (void *)cb;
+
+        ins->baddr0 = (long)mem_addr;
+        ins->nelem = nelem;
+        ins->tri0 = tri0;
+        ins->tri1_bufsize = tri1;
+        gru_start_instruction(ins, __opword(OP_IVSTORE, 0, xtype, IAA_RAM, 0,
+                                        CB_IMA(hints)));
+}
+
+static inline void gru_vset(void *cb, unsigned long mem_addr,
+                unsigned long value, unsigned char xtype, unsigned long nelem,
+                unsigned long stride, unsigned long hints)
+{
+        struct gru_instruction *ins = (void *)cb;
+
+        ins->baddr0 = (long)mem_addr;
+        ins->op2_value_baddr1 = value;
+        ins->nelem = nelem;
+        ins->op1_stride = stride;
+        gru_start_instruction(ins, __opword(OP_VSET, 0, xtype, IAA_RAM, 0,
+                                         CB_IMA(hints)));
+}
+
+static inline void gru_ivset(void *cb, unsigned long mem_addr,
+                unsigned int tri1, unsigned long value, unsigned char xtype,
+                unsigned long nelem, unsigned long hints)
+{
+        struct gru_instruction *ins = (void *)cb;
+
+        ins->baddr0 = (long)mem_addr;
+        ins->op2_value_baddr1 = value;
+        ins->nelem = nelem;
+        ins->tri1_bufsize = tri1;
+        gru_start_instruction(ins, __opword(OP_IVSET, 0, xtype, IAA_RAM, 0,
+                                        CB_IMA(hints)));
+}
+
+static inline void gru_vflush(void *cb, unsigned long mem_addr,
+                unsigned long nelem, unsigned char xtype, unsigned long stride,
+                unsigned long hints)
+{
+        struct gru_instruction *ins = (void *)cb;
+
+        ins->baddr0 = (long)mem_addr;
+        ins->op1_stride = stride;
+        ins->nelem = nelem;
+        gru_start_instruction(ins, __opword(OP_VFLUSH, 0, xtype, IAA_RAM, 0,
+                                        CB_IMA(hints)));
+}
+
+static inline void gru_nop(void *cb, int hints)
+{
+        struct gru_instruction *ins = (void *)cb;
+
+        gru_start_instruction(ins, __opword(OP_NOP, 0, 0, 0, 0, CB_IMA(hints)));
+}
+
+
+static inline void gru_bcopy(void *cb, const unsigned long src,
+                unsigned long dest,
+                unsigned int tri0, unsigned int xtype, unsigned long nelem,
+                unsigned int bufsize, unsigned long hints)
+{
+        struct gru_instruction *ins = (void *)cb;
+
+        ins->baddr0 = (long)src;
+        ins->op2_value_baddr1 = (long)dest;
+        ins->nelem = nelem;
+        ins->tri0 = tri0;
+        ins->tri1_bufsize = bufsize;
+        gru_start_instruction(ins, __opword(OP_BCOPY, 0, xtype, IAA_RAM,
+                                        IAA_RAM, CB_IMA(hints)));
+}
+
+static inline void gru_bstore(void *cb, const unsigned long src,
+                unsigned long dest, unsigned int tri0, unsigned int xtype,
+                unsigned long nelem, unsigned long hints)
+{
+        struct gru_instruction *ins = (void *)cb;
+
+        ins->baddr0 = (long)src;
+        ins->op2_value_baddr1 = (long)dest;
+        ins->nelem = nelem;
+        ins->tri0 = tri0;
+        gru_start_instruction(ins, __opword(OP_BSTORE, 0, xtype, 0, IAA_RAM,
+                                        CB_IMA(hints)));
+}
+
+static inline void gru_gamir(void *cb, int exopc, unsigned long src,
+                unsigned int xtype, unsigned long hints)
+{
+        struct gru_instruction *ins = (void *)cb;
+
+        ins->baddr0 = (long)src;
+        gru_start_instruction(ins, __opword(OP_GAMIR, exopc, xtype, IAA_RAM, 0,
+                                        CB_IMA(hints)));
+}
+
+static inline void gru_gamirr(void *cb, int exopc, unsigned long src,
+                unsigned int xtype, unsigned long hints)
+{
+        struct gru_instruction *ins = (void *)cb;
+
+        ins->baddr0 = (long)src;
+        gru_start_instruction(ins, __opword(OP_GAMIRR, exopc, xtype, IAA_RAM, 0,
+                                        CB_IMA(hints)));
+}
+
+static inline void gru_gamer(void *cb, int exopc, unsigned long src,
+                unsigned int xtype,
+                unsigned long operand1, unsigned long operand2,
+                unsigned long hints)
+{
+        struct gru_instruction *ins = (void *)cb;
+
+        ins->baddr0 = (long)src;
+        ins->op1_stride = operand1;
+        ins->op2_value_baddr1 = operand2;
+        gru_start_instruction(ins, __opword(OP_GAMER, exopc, xtype, IAA_RAM, 0,
+                                        CB_IMA(hints)));
+}
+
+static inline void gru_gamerr(void *cb, int exopc, unsigned long src,
+                unsigned int xtype, unsigned long operand1,
+                unsigned long operand2, unsigned long hints)
+{
+        struct gru_instruction *ins = (void *)cb;
+
+        ins->baddr0 = (long)src;
+        ins->op1_stride = operand1;
+        ins->op2_value_baddr1 = operand2;
+        gru_start_instruction(ins, __opword(OP_GAMERR, exopc, xtype, IAA_RAM, 0,
+                                        CB_IMA(hints)));
+}
+
+static inline void gru_gamxr(void *cb, unsigned long src,
+                unsigned int tri0, unsigned long hints)
+{
+        struct gru_instruction *ins = (void *)cb;
+
+        ins->baddr0 = (long)src;
+        ins->nelem = 4;
+        gru_start_instruction(ins, __opword(OP_GAMXR, EOP_XR_CSWAP, XTYPE_DW,
+                                 IAA_RAM, 0, CB_IMA(hints)));
+}
+
+static inline void gru_mesq(void *cb, unsigned long queue,
+                unsigned long tri0, unsigned long nelem,
+                unsigned long hints)
+{
+        struct gru_instruction *ins = (void *)cb;
+
+        ins->baddr0 = (long)queue;
+        ins->nelem = nelem;
+        ins->tri0 = tri0;
+        gru_start_instruction(ins, __opword(OP_MESQ, 0, XTYPE_CL, IAA_RAM, 0,
+                                        CB_IMA(hints)));
+}
+
+static inline unsigned long gru_get_amo_value(void *cb)
+{
+        struct gru_instruction *ins = (void *)cb;
+
+        return ins->avalue;
+}
+
+static inline int gru_get_amo_value_head(void *cb)
+{
+        struct gru_instruction *ins = (void *)cb;
+
+        return ins->avalue & 0xffffffff;
+}
+
+static inline int gru_get_amo_value_limit(void *cb)
+{
+        struct gru_instruction *ins = (void *)cb;
+
+        return ins->avalue >> 32;
+}
+
+static inline union gru_mesqhead  gru_mesq_head(int head, int limit)
+{
+        union gru_mesqhead mqh;
+
+        mqh.head = head;
+        mqh.limit = limit;
+        return mqh;
+}
+
+/*
+ * Get struct control_block_extended_exc_detail for CB.
+ */
+extern int gru_get_cb_exception_detail(void *cb,
+                       struct control_block_extended_exc_detail *excdet);
+
+#define GRU_EXC_STR_SIZE                256
+
+extern int gru_check_status_proc(void *cb);
+extern int gru_wait_proc(void *cb);
+extern void gru_wait_abort_proc(void *cb);
+
+/*
+ * Control block definition for checking status
+ */
+struct gru_control_block_status {
+        unsigned int    icmd            :1;
+        unsigned int    unused1         :31;
+        unsigned int    unused2         :24;
+        unsigned int    istatus         :2;
+        unsigned int    isubstatus      :4;
+        unsigned int    inused3         :2;
+};
+
+/* Get CB status */
+static inline int gru_get_cb_status(void *cb)
+{
+        struct gru_control_block_status *cbs = (void *)cb;
+
+        return cbs->istatus;
+}
+
+/* Get CB message queue substatus */
+static inline int gru_get_cb_message_queue_substatus(void *cb)
+{
+        struct gru_control_block_status *cbs = (void *)cb;
+
+        return cbs->isubstatus & CBSS_MSG_QUEUE_MASK;
+}
+
+/* Get CB substatus */
+static inline int gru_get_cb_substatus(void *cb)
+{
+        struct gru_control_block_status *cbs = (void *)cb;
+
+        return cbs->isubstatus;
+}
+
+/* Check the status of a CB. If the CB is in UPM mode, call the
+ * OS to handle the UPM status.
+ * Returns the CB status field value (0 for normal completion)
+ */
+static inline int gru_check_status(void *cb)
+{
+        struct gru_control_block_status *cbs = (void *)cb;
+        int ret = cbs->istatus;
+
+        if (ret == CBS_CALL_OS)
+                ret = gru_check_status_proc(cb);
+        return ret;
+}
+
+/* Wait for CB to complete.
+ * Returns the CB status field value (0 for normal completion)
+ */
+static inline int gru_wait(void *cb)
+{
+        struct gru_control_block_status *cbs = (void *)cb;
+        int ret = cbs->istatus;;
+
+        if (ret != CBS_IDLE)
+                ret = gru_wait_proc(cb);
+        return ret;
+}
+
+/* Wait for CB to complete. Aborts program if error. (Note: error does NOT
+ * mean TLB mis - only fatal errors such as memory parity error or user
+ * bugs will cause termination.
+ */
+static inline void gru_wait_abort(void *cb)
+{
+        struct gru_control_block_status *cbs = (void *)cb;
+
+        if (cbs->istatus != CBS_IDLE)
+                gru_wait_abort_proc(cb);
+}
+
+
+/*
+ * Get a pointer to a control block
+ *      gseg    - GSeg address returned from gru_get_thread_gru_segment()
+ *      index   - index of desired CB
+ */
+static inline void *gru_get_cb_pointer(void *gseg,
+                                                      int index)
+{
+        return gseg + GRU_CB_BASE + index * GRU_HANDLE_STRIDE;
+}
+
+/*
+ * Get a pointer to a cacheline in the data segment portion of a GSeg
+ *      gseg    - GSeg address returned from gru_get_thread_gru_segment()
+ *      index   - index of desired cache line
+ */
+static inline void *gru_get_data_pointer(void *gseg, int index)
+{
+        return gseg + GRU_DS_BASE + index * GRU_CACHE_LINE_BYTES;
+}
+
+/*
+ * Convert a vaddr into the tri index within the GSEG
+ *      vaddr           - virtual address of within gseg
+ */
+static inline int gru_get_tri(void *vaddr)
+{
+        return ((unsigned long)vaddr & (GRU_GSEG_PAGESIZE - 1)) - GRU_DS_BASE;
+}
+#endif          /* __GRU_INSTRUCTIONS_H__ */
diff --git a/drivers/misc/sgi-gru/grufault.c b/drivers/misc/sgi-gru/grufault.c
new file mode 100644
index 000000000000..3d33015bbf31
--- /dev/null
+++ b/drivers/misc/sgi-gru/grufault.c
@@ -0,0 +1,633 @@
+/*
+ * SN Platform GRU Driver
+ *
+ *              FAULT HANDLER FOR GRU DETECTED TLB MISSES
+ *
+ * This file contains code that handles TLB misses within the GRU.
+ * These misses are reported either via interrupts or user polling of
+ * the user CB.
+ *
+ *  Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/hugetlb.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+#include <asm/pgtable.h>
+#include "gru.h"
+#include "grutables.h"
+#include "grulib.h"
+#include "gru_instructions.h"
+#include <asm/uv/uv_hub.h>
+
+/*
+ * Test if a physical address is a valid GRU GSEG address
+ */
+static inline int is_gru_paddr(unsigned long paddr)
+{
+        return paddr >= gru_start_paddr && paddr < gru_end_paddr;
+}
+
+/*
+ * Find the vma of a GRU segment. Caller must hold mmap_sem.
+ */
+struct vm_area_struct *gru_find_vma(unsigned long vaddr)
+{
+        struct vm_area_struct *vma;
+
+        vma = find_vma(current->mm, vaddr);
+        if (vma && vma->vm_start <= vaddr && vma->vm_ops == &gru_vm_ops)
+                return vma;
+        return NULL;
+}
+
+/*
+ * Find and lock the gts that contains the specified user vaddr.
+ *
+ * Returns:
+ *      - *gts with the mmap_sem locked for read and the GTS locked.
+ *      - NULL if vaddr invalid OR is not a valid GSEG vaddr.
+ */
+
+static struct gru_thread_state *gru_find_lock_gts(unsigned long vaddr)
+{
+        struct mm_struct *mm = current->mm;
+        struct vm_area_struct *vma;
+        struct gru_thread_state *gts = NULL;
+
+        down_read(&mm->mmap_sem);
+        vma = gru_find_vma(vaddr);
+        if (vma)
+                gts = gru_find_thread_state(vma, TSID(vaddr, vma));
+        if (gts)
+                mutex_lock(&gts->ts_ctxlock);
+        else
+                up_read(&mm->mmap_sem);
+        return gts;
+}
+
+static struct gru_thread_state *gru_alloc_locked_gts(unsigned long vaddr)
+{
+        struct mm_struct *mm = current->mm;
+        struct vm_area_struct *vma;
+        struct gru_thread_state *gts = NULL;
+
+        down_write(&mm->mmap_sem);
+        vma = gru_find_vma(vaddr);
+        if (vma)
+                gts = gru_alloc_thread_state(vma, TSID(vaddr, vma));
+        if (gts) {
+                mutex_lock(&gts->ts_ctxlock);
+                downgrade_write(&mm->mmap_sem);
+        } else {
+                up_write(&mm->mmap_sem);
+        }
+
+        return gts;
+}
+
+/*
+ * Unlock a GTS that was previously locked with gru_find_lock_gts().
+ */
+static void gru_unlock_gts(struct gru_thread_state *gts)
+{
+        mutex_unlock(&gts->ts_ctxlock);
+        up_read(&current->mm->mmap_sem);
+}
+
+/*
+ * Set a CB.istatus to active using a user virtual address. This must be done
+ * just prior to a TFH RESTART. The new cb.istatus is an in-cache status ONLY.
+ * If the line is evicted, the status may be lost. The in-cache update
+ * is necessary to prevent the user from seeing a stale cb.istatus that will
+ * change as soon as the TFH restart is complete. Races may cause an
+ * occasional failure to clear the cb.istatus, but that is ok.
+ *
+ * If the cb address is not valid (should not happen, but...), nothing
+ * bad will happen.. The get_user()/put_user() will fail but there
+ * are no bad side-effects.
+ */
+static void gru_cb_set_istatus_active(unsigned long __user *cb)
+{
+        union {
+                struct gru_instruction_bits bits;
+                unsigned long dw;
+        } u;
+
+        if (cb) {
+                get_user(u.dw, cb);
+                u.bits.istatus = CBS_ACTIVE;
+                put_user(u.dw, cb);
+        }
+}
+
+/*
+ * Convert a interrupt IRQ to a pointer to the GRU GTS that caused the
+ * interrupt. Interrupts are always sent to a cpu on the blade that contains the
+ * GRU (except for headless blades which are not currently supported). A blade
+ * has N grus; a block of N consecutive IRQs is assigned to the GRUs. The IRQ
+ * number uniquely identifies the GRU chiplet on the local blade that caused the
+ * interrupt. Always called in interrupt context.
+ */
+static inline struct gru_state *irq_to_gru(int irq)
+{
+        return &gru_base[uv_numa_blade_id()]->bs_grus[irq - IRQ_GRU];
+}
+
+/*
+ * Read & clear a TFM
+ *
+ * The GRU has an array of fault maps. A map is private to a cpu
+ * Only one cpu will be accessing a cpu's fault map.
+ *
+ * This function scans the cpu-private fault map & clears all bits that
+ * are set. The function returns a bitmap that indicates the bits that
+ * were cleared. Note that sense the maps may be updated asynchronously by
+ * the GRU, atomic operations must be used to clear bits.
+ */
+static void get_clear_fault_map(struct gru_state *gru,
+                                struct gru_tlb_fault_map *map)
+{
+        unsigned long i, k;
+        struct gru_tlb_fault_map *tfm;
+
+        tfm = get_tfm_for_cpu(gru, gru_cpu_fault_map_id());
+        prefetchw(tfm);         /* Helps on hardware, required for emulator */
+        for (i = 0; i < BITS_TO_LONGS(GRU_NUM_CBE); i++) {
+                k = tfm->fault_bits[i];
+                if (k)
+                        k = xchg(&tfm->fault_bits[i], 0UL);
+                map->fault_bits[i] = k;
+        }
+
+        /*
+         * Not functionally required but helps performance. (Required
+         * on emulator)
+         */
+        gru_flush_cache(tfm);
+}
+
+/*
+ * Atomic (interrupt context) & non-atomic (user context) functions to
+ * convert a vaddr into a physical address. The size of the page
+ * is returned in pageshift.
+ *      returns:
+ *                0 - successful
+ *              < 0 - error code
+ *                1 - (atomic only) try again in non-atomic context
+ */
+static int non_atomic_pte_lookup(struct vm_area_struct *vma,
+                                 unsigned long vaddr, int write,
+                                 unsigned long *paddr, int *pageshift)
+{
+        struct page *page;
+
+        /* ZZZ Need to handle HUGE pages */
+        if (is_vm_hugetlb_page(vma))
+                return -EFAULT;
+        *pageshift = PAGE_SHIFT;
+        if (get_user_pages
+            (current, current->mm, vaddr, 1, write, 0, &page, NULL) <= 0)
+                return -EFAULT;
+        *paddr = page_to_phys(page);
+        put_page(page);
+        return 0;
+}
+
+/*
+ *
+ * atomic_pte_lookup
+ *
+ * Convert a user virtual address to a physical address
+ * Only supports Intel large pages (2MB only) on x86_64.
+ *      ZZZ - hugepage support is incomplete
+ */
+static int atomic_pte_lookup(struct vm_area_struct *vma, unsigned long vaddr,
+        int write, unsigned long *paddr, int *pageshift)
+{
+        pgd_t *pgdp;
+        pmd_t *pmdp;
+        pud_t *pudp;
+        pte_t pte;
+
+        WARN_ON(irqs_disabled());               /* ZZZ debug */
+
+        local_irq_disable();
+        pgdp = pgd_offset(vma->vm_mm, vaddr);
+        if (unlikely(pgd_none(*pgdp)))
+                goto err;
+
+        pudp = pud_offset(pgdp, vaddr);
+        if (unlikely(pud_none(*pudp)))
+                goto err;
+
+        pmdp = pmd_offset(pudp, vaddr);
+        if (unlikely(pmd_none(*pmdp)))
+                goto err;
+#ifdef CONFIG_X86_64
+        if (unlikely(pmd_large(*pmdp)))
+                pte = *(pte_t *) pmdp;
+        else
+#endif
+                pte = *pte_offset_kernel(pmdp, vaddr);
+
+        local_irq_enable();
+
+        if (unlikely(!pte_present(pte) ||
+                     (write && (!pte_write(pte) || !pte_dirty(pte)))))
+                return 1;
+
+        *paddr = pte_pfn(pte) << PAGE_SHIFT;
+        *pageshift = is_vm_hugetlb_page(vma) ? HPAGE_SHIFT : PAGE_SHIFT;
+        return 0;
+
+err:
+        local_irq_enable();
+        return 1;
+}
+
+/*
+ * Drop a TLB entry into the GRU. The fault is described by info in an TFH.
+ *      Input:
+ *              cb    Address of user CBR. Null if not running in user context
+ *      Return:
+ *                0 = dropin, exception, or switch to UPM successful
+ *                1 = range invalidate active
+ *              < 0 = error code
+ *
+ */
+static int gru_try_dropin(struct gru_thread_state *gts,
+                          struct gru_tlb_fault_handle *tfh,
+                          unsigned long __user *cb)
+{
+        struct mm_struct *mm = gts->ts_mm;
+        struct vm_area_struct *vma;
+        int pageshift, asid, write, ret;
+        unsigned long paddr, gpa, vaddr;
+
+        /*
+         * NOTE: The GRU contains magic hardware that eliminates races between
+         * TLB invalidates and TLB dropins. If an invalidate occurs
+         * in the window between reading the TFH and the subsequent TLB dropin,
+         * the dropin is ignored. This eliminates the need for additional locks.
+         */
+
+        /*
+         * Error if TFH state is IDLE or FMM mode & the user issuing a UPM call.
+         * Might be a hardware race OR a stupid user. Ignore FMM because FMM
+         * is a transient state.
+         */
+        if (tfh->state == TFHSTATE_IDLE)
+                goto failidle;
+        if (tfh->state == TFHSTATE_MISS_FMM && cb)
+                goto failfmm;
+
+        write = (tfh->cause & TFHCAUSE_TLB_MOD) != 0;
+        vaddr = tfh->missvaddr;
+        asid = tfh->missasid;
+        if (asid == 0)
+                goto failnoasid;
+
+        rmb();  /* TFH must be cache resident before reading ms_range_active */
+
+        /*
+         * TFH is cache resident - at least briefly. Fail the dropin
+         * if a range invalidate is active.
+         */
+        if (atomic_read(&gts->ts_gms->ms_range_active))
+                goto failactive;
+
+        vma = find_vma(mm, vaddr);
+        if (!vma)
+                goto failinval;
+
+        /*
+         * Atomic lookup is faster & usually works even if called in non-atomic
+         * context.
+         */
+        ret = atomic_pte_lookup(vma, vaddr, write, &paddr, &pageshift);
+        if (ret) {
+                if (!cb)
+                        goto failupm;
+                if (non_atomic_pte_lookup(vma, vaddr, write, &paddr,
+                                          &pageshift))
+                        goto failinval;
+        }
+        if (is_gru_paddr(paddr))
+                goto failinval;
+
+        paddr = paddr & ~((1UL << pageshift) - 1);
+        gpa = uv_soc_phys_ram_to_gpa(paddr);
+        gru_cb_set_istatus_active(cb);
+        tfh_write_restart(tfh, gpa, GAA_RAM, vaddr, asid, write,
+                          GRU_PAGESIZE(pageshift));
+        STAT(tlb_dropin);
+        gru_dbg(grudev,
+                "%s: tfh 0x%p, vaddr 0x%lx, asid 0x%x, ps %d, gpa 0x%lx\n",
+                ret ? "non-atomic" : "atomic", tfh, vaddr, asid,
+                pageshift, gpa);
+        return 0;
+
+failnoasid:
+        /* No asid (delayed unload). */
+        STAT(tlb_dropin_fail_no_asid);
+        gru_dbg(grudev, "FAILED no_asid tfh: 0x%p, vaddr 0x%lx\n", tfh, vaddr);
+        if (!cb)
+                tfh_user_polling_mode(tfh);
+        else
+                gru_flush_cache(tfh);
+        return -EAGAIN;
+
+failupm:
+        /* Atomic failure switch CBR to UPM */
+        tfh_user_polling_mode(tfh);
+        STAT(tlb_dropin_fail_upm);
+        gru_dbg(grudev, "FAILED upm tfh: 0x%p, vaddr 0x%lx\n", tfh, vaddr);
+        return 1;
+
+failfmm:
+        /* FMM state on UPM call */
+        STAT(tlb_dropin_fail_fmm);
+        gru_dbg(grudev, "FAILED fmm tfh: 0x%p, state %d\n", tfh, tfh->state);
+        return 0;
+
+failidle:
+        /* TFH was idle  - no miss pending */
+        gru_flush_cache(tfh);
+        if (cb)
+                gru_flush_cache(cb);
+        STAT(tlb_dropin_fail_idle);
+        gru_dbg(grudev, "FAILED idle tfh: 0x%p, state %d\n", tfh, tfh->state);
+        return 0;
+
+failinval:
+        /* All errors (atomic & non-atomic) switch CBR to EXCEPTION state */
+        tfh_exception(tfh);
+        STAT(tlb_dropin_fail_invalid);
+        gru_dbg(grudev, "FAILED inval tfh: 0x%p, vaddr 0x%lx\n", tfh, vaddr);
+        return -EFAULT;
+
+failactive:
+        /* Range invalidate active. Switch to UPM iff atomic */
+        if (!cb)
+                tfh_user_polling_mode(tfh);
+        else
+                gru_flush_cache(tfh);
+        STAT(tlb_dropin_fail_range_active);
+        gru_dbg(grudev, "FAILED range active: tfh 0x%p, vaddr 0x%lx\n",
+                tfh, vaddr);
+        return 1;
+}
+
+/*
+ * Process an external interrupt from the GRU. This interrupt is
+ * caused by a TLB miss.
+ * Note that this is the interrupt handler that is registered with linux
+ * interrupt handlers.
+ */
+irqreturn_t gru_intr(int irq, void *dev_id)
+{
+        struct gru_state *gru;
+        struct gru_tlb_fault_map map;
+        struct gru_thread_state *gts;
+        struct gru_tlb_fault_handle *tfh = NULL;
+        int cbrnum, ctxnum;
+
+        STAT(intr);
+
+        gru = irq_to_gru(irq);
+        if (!gru) {
+                dev_err(grudev, "GRU: invalid interrupt: cpu %d, irq %d\n",
+                        raw_smp_processor_id(), irq);
+                return IRQ_NONE;
+        }
+        get_clear_fault_map(gru, &map);
+        gru_dbg(grudev, "irq %d, gru %x, map 0x%lx\n", irq, gru->gs_gid,
+                map.fault_bits[0]);
+
+        for_each_cbr_in_tfm(cbrnum, map.fault_bits) {
+                tfh = get_tfh_by_index(gru, cbrnum);
+                prefetchw(tfh); /* Helps on hdw, required for emulator */
+
+                /*
+                 * When hardware sets a bit in the faultmap, it implicitly
+                 * locks the GRU context so that it cannot be unloaded.
+                 * The gts cannot change until a TFH start/writestart command
+                 * is issued.
+                 */
+                ctxnum = tfh->ctxnum;
+                gts = gru->gs_gts[ctxnum];
+
+                /*
+                 * This is running in interrupt context. Trylock the mmap_sem.
+                 * If it fails, retry the fault in user context.
+                 */
+                if (down_read_trylock(&gts->ts_mm->mmap_sem)) {
+                        gru_try_dropin(gts, tfh, NULL);
+                        up_read(&gts->ts_mm->mmap_sem);
+                } else {
+                        tfh_user_polling_mode(tfh);
+                }
+        }
+        return IRQ_HANDLED;
+}
+
+
+static int gru_user_dropin(struct gru_thread_state *gts,
+                           struct gru_tlb_fault_handle *tfh,
+                           unsigned long __user *cb)
+{
+        struct gru_mm_struct *gms = gts->ts_gms;
+        int ret;
+
+        while (1) {
+                wait_event(gms->ms_wait_queue,
+                           atomic_read(&gms->ms_range_active) == 0);
+                prefetchw(tfh); /* Helps on hdw, required for emulator */
+                ret = gru_try_dropin(gts, tfh, cb);
+                if (ret <= 0)
+                        return ret;
+                STAT(call_os_wait_queue);
+        }
+}
+
+/*
+ * This interface is called as a result of a user detecting a "call OS" bit
+ * in a user CB. Normally means that a TLB fault has occurred.
+ *      cb - user virtual address of the CB
+ */
+int gru_handle_user_call_os(unsigned long cb)
+{
+        struct gru_tlb_fault_handle *tfh;
+        struct gru_thread_state *gts;
+        unsigned long __user *cbp;
+        int ucbnum, cbrnum, ret = -EINVAL;
+
+        STAT(call_os);
+        gru_dbg(grudev, "address 0x%lx\n", cb);
+
+        /* sanity check the cb pointer */
+        ucbnum = get_cb_number((void *)cb);
+        if ((cb & (GRU_HANDLE_STRIDE - 1)) || ucbnum >= GRU_NUM_CB)
+                return -EINVAL;
+        cbp = (unsigned long *)cb;
+
+        gts = gru_find_lock_gts(cb);
+        if (!gts)
+                return -EINVAL;
+
+        if (ucbnum >= gts->ts_cbr_au_count * GRU_CBR_AU_SIZE) {
+                ret = -EINVAL;
+                goto exit;
+        }
+
+        /*
+         * If force_unload is set, the UPM TLB fault is phony. The task
+         * has migrated to another node and the GSEG must be moved. Just
+         * unload the context. The task will page fault and assign a new
+         * context.
+         */
+        ret = -EAGAIN;
+        cbrnum = thread_cbr_number(gts, ucbnum);
+        if (gts->ts_force_unload) {
+                gru_unload_context(gts, 1);
+        } else if (gts->ts_gru) {
+                tfh = get_tfh_by_index(gts->ts_gru, cbrnum);
+                ret = gru_user_dropin(gts, tfh, cbp);
+        }
+exit:
+        gru_unlock_gts(gts);
+        return ret;
+}
+
+/*
+ * Fetch the exception detail information for a CB that terminated with
+ * an exception.
+ */
+int gru_get_exception_detail(unsigned long arg)
+{
+        struct control_block_extended_exc_detail excdet;
+        struct gru_control_block_extended *cbe;
+        struct gru_thread_state *gts;
+        int ucbnum, cbrnum, ret;
+
+        STAT(user_exception);
+        if (copy_from_user(&excdet, (void __user *)arg, sizeof(excdet)))
+                return -EFAULT;
+
+        gru_dbg(grudev, "address 0x%lx\n", excdet.cb);
+        gts = gru_find_lock_gts(excdet.cb);
+        if (!gts)
+                return -EINVAL;
+
+        if (gts->ts_gru) {
+                ucbnum = get_cb_number((void *)excdet.cb);
+                cbrnum = thread_cbr_number(gts, ucbnum);
+                cbe = get_cbe_by_index(gts->ts_gru, cbrnum);
+                excdet.opc = cbe->opccpy;
+                excdet.exopc = cbe->exopccpy;
+                excdet.ecause = cbe->ecause;
+                excdet.exceptdet0 = cbe->idef1upd;
+                excdet.exceptdet1 = cbe->idef3upd;
+                ret = 0;
+        } else {
+                ret = -EAGAIN;
+        }
+        gru_unlock_gts(gts);
+
+        gru_dbg(grudev, "address 0x%lx, ecause 0x%x\n", excdet.cb,
+                excdet.ecause);
+        if (!ret && copy_to_user((void __user *)arg, &excdet, sizeof(excdet)))
+                ret = -EFAULT;
+        return ret;
+}
+
+/*
+ * User request to unload a context. Content is saved for possible reload.
+ */
+int gru_user_unload_context(unsigned long arg)
+{
+        struct gru_thread_state *gts;
+        struct gru_unload_context_req req;
+
+        STAT(user_unload_context);
+        if (copy_from_user(&req, (void __user *)arg, sizeof(req)))
+                return -EFAULT;
+
+        gru_dbg(grudev, "gseg 0x%lx\n", req.gseg);
+
+        gts = gru_find_lock_gts(req.gseg);
+        if (!gts)
+                return -EINVAL;
+
+        if (gts->ts_gru)
+                gru_unload_context(gts, 1);
+        gru_unlock_gts(gts);
+
+        return 0;
+}
+
+/*
+ * User request to flush a range of virtual addresses from the GRU TLB
+ * (Mainly for testing).
+ */
+int gru_user_flush_tlb(unsigned long arg)
+{
+        struct gru_thread_state *gts;
+        struct gru_flush_tlb_req req;
+
+        STAT(user_flush_tlb);
+        if (copy_from_user(&req, (void __user *)arg, sizeof(req)))
+                return -EFAULT;
+
+        gru_dbg(grudev, "gseg 0x%lx, vaddr 0x%lx, len 0x%lx\n", req.gseg,
+                req.vaddr, req.len);
+
+        gts = gru_find_lock_gts(req.gseg);
+        if (!gts)
+                return -EINVAL;
+
+        gru_flush_tlb_range(gts->ts_gms, req.vaddr, req.vaddr + req.len);
+        gru_unlock_gts(gts);
+
+        return 0;
+}
+
+/*
+ * Register the current task as the user of the GSEG slice.
+ * Needed for TLB fault interrupt targeting.
+ */
+int gru_set_task_slice(long address)
+{
+        struct gru_thread_state *gts;
+
+        STAT(set_task_slice);
+        gru_dbg(grudev, "address 0x%lx\n", address);
+        gts = gru_alloc_locked_gts(address);
+        if (!gts)
+                return -EINVAL;
+
+        gts->ts_tgid_owner = current->tgid;
+        gru_unlock_gts(gts);
+
+        return 0;
+}
diff --git a/drivers/misc/sgi-gru/grufile.c b/drivers/misc/sgi-gru/grufile.c
new file mode 100644
index 000000000000..23c91f5f6b61
--- /dev/null
+++ b/drivers/misc/sgi-gru/grufile.c
@@ -0,0 +1,485 @@
+/*
+ * SN Platform GRU Driver
+ *
+ *              FILE OPERATIONS & DRIVER INITIALIZATION
+ *
+ * This file supports the user system call for file open, close, mmap, etc.
+ * This also incudes the driver initialization code.
+ *
+ *  Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <linux/io.h>
+#include <linux/smp_lock.h>
+#include <linux/spinlock.h>
+#include <linux/device.h>
+#include <linux/miscdevice.h>
+#include <linux/interrupt.h>
+#include <linux/proc_fs.h>
+#include <linux/uaccess.h>
+#include "gru.h"
+#include "grulib.h"
+#include "grutables.h"
+
+#if defined CONFIG_X86_64
+#include <asm/genapic.h>
+#include <asm/irq.h>
+#define IS_UV()         is_uv_system()
+#elif defined CONFIG_IA64
+#include <asm/system.h>
+#include <asm/sn/simulator.h>
+/* temp support for running on hardware simulator */
+#define IS_UV()         IS_MEDUSA() || ia64_platform_is("uv")
+#else
+#define IS_UV()         0
+#endif
+
+#include <asm/uv/uv_hub.h>
+#include <asm/uv/uv_mmrs.h>
+
+struct gru_blade_state *gru_base[GRU_MAX_BLADES] __read_mostly;
+unsigned long gru_start_paddr, gru_end_paddr __read_mostly;
+struct gru_stats_s gru_stats;
+
+/* Guaranteed user available resources on each node */
+static int max_user_cbrs, max_user_dsr_bytes;
+
+static struct file_operations gru_fops;
+static struct miscdevice gru_miscdev;
+
+
+/*
+ * gru_vma_close
+ *
+ * Called when unmapping a device mapping. Frees all gru resources
+ * and tables belonging to the vma.
+ */
+static void gru_vma_close(struct vm_area_struct *vma)
+{
+        struct gru_vma_data *vdata;
+        struct gru_thread_state *gts;
+        struct list_head *entry, *next;
+
+        if (!vma->vm_private_data)
+                return;
+
+        vdata = vma->vm_private_data;
+        vma->vm_private_data = NULL;
+        gru_dbg(grudev, "vma %p, file %p, vdata %p\n", vma, vma->vm_file,
+                                vdata);
+        list_for_each_safe(entry, next, &vdata->vd_head) {
+                gts =
+                    list_entry(entry, struct gru_thread_state, ts_next);
+                list_del(&gts->ts_next);
+                mutex_lock(&gts->ts_ctxlock);
+                if (gts->ts_gru)
+                        gru_unload_context(gts, 0);
+                mutex_unlock(&gts->ts_ctxlock);
+                gts_drop(gts);
+        }
+        kfree(vdata);
+        STAT(vdata_free);
+}
+
+/*
+ * gru_file_mmap
+ *
+ * Called when mmaping the device.  Initializes the vma with a fault handler
+ * and private data structure necessary to allocate, track, and free the
+ * underlying pages.
+ */
+static int gru_file_mmap(struct file *file, struct vm_area_struct *vma)
+{
+        if ((vma->vm_flags & (VM_SHARED | VM_WRITE)) != (VM_SHARED | VM_WRITE))
+                return -EPERM;
+
+        if (vma->vm_start & (GRU_GSEG_PAGESIZE - 1) ||
+                        vma->vm_end & (GRU_GSEG_PAGESIZE - 1))
+                return -EINVAL;
+
+        vma->vm_flags |=
+            (VM_IO | VM_DONTCOPY | VM_LOCKED | VM_DONTEXPAND | VM_PFNMAP |
+                        VM_RESERVED);
+        vma->vm_page_prot = PAGE_SHARED;
+        vma->vm_ops = &gru_vm_ops;
+
+        vma->vm_private_data = gru_alloc_vma_data(vma, 0);
+        if (!vma->vm_private_data)
+                return -ENOMEM;
+
+        gru_dbg(grudev, "file %p, vaddr 0x%lx, vma %p, vdata %p\n",
+                file, vma->vm_start, vma, vma->vm_private_data);
+        return 0;
+}
+
+/*
+ * Create a new GRU context
+ */
+static int gru_create_new_context(unsigned long arg)
+{
+        struct gru_create_context_req req;
+        struct vm_area_struct *vma;
+        struct gru_vma_data *vdata;
+        int ret = -EINVAL;
+
+
+        if (copy_from_user(&req, (void __user *)arg, sizeof(req)))
+                return -EFAULT;
+
+        if (req.data_segment_bytes == 0 ||
+                                req.data_segment_bytes > max_user_dsr_bytes)
+                return -EINVAL;
+        if (!req.control_blocks || !req.maximum_thread_count ||
+                                req.control_blocks > max_user_cbrs)
+                return -EINVAL;
+
+        if (!(req.options & GRU_OPT_MISS_MASK))
+                req.options |= GRU_OPT_MISS_FMM_INTR;
+
+        down_write(&current->mm->mmap_sem);
+        vma = gru_find_vma(req.gseg);
+        if (vma) {
+                vdata = vma->vm_private_data;
+                vdata->vd_user_options = req.options;
+                vdata->vd_dsr_au_count =
+                    GRU_DS_BYTES_TO_AU(req.data_segment_bytes);
+                vdata->vd_cbr_au_count = GRU_CB_COUNT_TO_AU(req.control_blocks);
+                ret = 0;
+        }
+        up_write(&current->mm->mmap_sem);
+
+        return ret;
+}
+
+/*
+ * Get GRU configuration info (temp - for emulator testing)
+ */
+static long gru_get_config_info(unsigned long arg)
+{
+        struct gru_config_info info;
+        int nodesperblade;
+
+        if (num_online_nodes() > 1 &&
+                        (uv_node_to_blade_id(1) == uv_node_to_blade_id(0)))
+                nodesperblade = 2;
+        else
+                nodesperblade = 1;
+        info.cpus = num_online_cpus();
+        info.nodes = num_online_nodes();
+        info.blades = info.nodes / nodesperblade;
+        info.chiplets = GRU_CHIPLETS_PER_BLADE * info.blades;
+
+        if (copy_to_user((void __user *)arg, &info, sizeof(info)))
+                return -EFAULT;
+        return 0;
+}
+
+/*
+ * Get GRU chiplet status
+ */
+static long gru_get_chiplet_status(unsigned long arg)
+{
+        struct gru_state *gru;
+        struct gru_chiplet_info info;
+
+        if (copy_from_user(&info, (void __user *)arg, sizeof(info)))
+                return -EFAULT;
+
+        if (info.node == -1)
+                info.node = numa_node_id();
+        if (info.node >= num_possible_nodes() ||
+                        info.chiplet >= GRU_CHIPLETS_PER_HUB ||
+                        info.node < 0 || info.chiplet < 0)
+                return -EINVAL;
+
+        info.blade = uv_node_to_blade_id(info.node);
+        gru = get_gru(info.blade, info.chiplet);
+
+        info.total_dsr_bytes = GRU_NUM_DSR_BYTES;
+        info.total_cbr = GRU_NUM_CB;
+        info.total_user_dsr_bytes = GRU_NUM_DSR_BYTES -
+                gru->gs_reserved_dsr_bytes;
+        info.total_user_cbr = GRU_NUM_CB - gru->gs_reserved_cbrs;
+        info.free_user_dsr_bytes = hweight64(gru->gs_dsr_map) *
+                        GRU_DSR_AU_BYTES;
+        info.free_user_cbr = hweight64(gru->gs_cbr_map) * GRU_CBR_AU_SIZE;
+
+        if (copy_to_user((void __user *)arg, &info, sizeof(info)))
+                return -EFAULT;
+        return 0;
+}
+
+/*
+ * gru_file_unlocked_ioctl
+ *
+ * Called to update file attributes via IOCTL calls.
+ */
+static long gru_file_unlocked_ioctl(struct file *file, unsigned int req,
+                                    unsigned long arg)
+{
+        int err = -EBADRQC;
+
+        gru_dbg(grudev, "file %p\n", file);
+
+        switch (req) {
+        case GRU_CREATE_CONTEXT:
+                err = gru_create_new_context(arg);
+                break;
+        case GRU_SET_TASK_SLICE:
+                err = gru_set_task_slice(arg);
+                break;
+        case GRU_USER_GET_EXCEPTION_DETAIL:
+                err = gru_get_exception_detail(arg);
+                break;
+        case GRU_USER_UNLOAD_CONTEXT:
+                err = gru_user_unload_context(arg);
+                break;
+        case GRU_GET_CHIPLET_STATUS:
+                err = gru_get_chiplet_status(arg);
+                break;
+        case GRU_USER_FLUSH_TLB:
+                err = gru_user_flush_tlb(arg);
+                break;
+        case GRU_USER_CALL_OS:
+                err = gru_handle_user_call_os(arg);
+                break;
+        case GRU_GET_CONFIG_INFO:
+                err = gru_get_config_info(arg);
+                break;
+        }
+        return err;
+}
+
+/*
+ * Called at init time to build tables for all GRUs that are present in the
+ * system.
+ */
+static void gru_init_chiplet(struct gru_state *gru, unsigned long paddr,
+                             void *vaddr, int nid, int bid, int grunum)
+{
+        spin_lock_init(&gru->gs_lock);
+        spin_lock_init(&gru->gs_asid_lock);
+        gru->gs_gru_base_paddr = paddr;
+        gru->gs_gru_base_vaddr = vaddr;
+        gru->gs_gid = bid * GRU_CHIPLETS_PER_BLADE + grunum;
+        gru->gs_blade = gru_base[bid];
+        gru->gs_blade_id = bid;
+        gru->gs_cbr_map = (GRU_CBR_AU == 64) ? ~0 : (1UL << GRU_CBR_AU) - 1;
+        gru->gs_dsr_map = (1UL << GRU_DSR_AU) - 1;
+        gru_tgh_flush_init(gru);
+        gru_dbg(grudev, "bid %d, nid %d, gru %x, vaddr %p (0x%lx)\n",
+                bid, nid, gru->gs_gid, gru->gs_gru_base_vaddr,
+                gru->gs_gru_base_paddr);
+        gru_kservices_init(gru);
+}
+
+static int gru_init_tables(unsigned long gru_base_paddr, void *gru_base_vaddr)
+{
+        int pnode, nid, bid, chip;
+        int cbrs, dsrbytes, n;
+        int order = get_order(sizeof(struct gru_blade_state));
+        struct page *page;
+        struct gru_state *gru;
+        unsigned long paddr;
+        void *vaddr;
+
+        max_user_cbrs = GRU_NUM_CB;
+        max_user_dsr_bytes = GRU_NUM_DSR_BYTES;
+        for_each_online_node(nid) {
+                bid = uv_node_to_blade_id(nid);
+                pnode = uv_node_to_pnode(nid);
+                if (gru_base[bid])
+                        continue;
+                page = alloc_pages_node(nid, GFP_KERNEL, order);
+                if (!page)
+                        goto fail;
+                gru_base[bid] = page_address(page);
+                memset(gru_base[bid], 0, sizeof(struct gru_blade_state));
+                gru_base[bid]->bs_lru_gru = &gru_base[bid]->bs_grus[0];
+                spin_lock_init(&gru_base[bid]->bs_lock);
+
+                dsrbytes = 0;
+                cbrs = 0;
+                for (gru = gru_base[bid]->bs_grus, chip = 0;
+                                chip < GRU_CHIPLETS_PER_BLADE;
+                                chip++, gru++) {
+                        paddr = gru_chiplet_paddr(gru_base_paddr, pnode, chip);
+                        vaddr = gru_chiplet_vaddr(gru_base_vaddr, pnode, chip);
+                        gru_init_chiplet(gru, paddr, vaddr, bid, nid, chip);
+                        n = hweight64(gru->gs_cbr_map) * GRU_CBR_AU_SIZE;
+                        cbrs = max(cbrs, n);
+                        n = hweight64(gru->gs_dsr_map) * GRU_DSR_AU_BYTES;
+                        dsrbytes = max(dsrbytes, n);
+                }
+                max_user_cbrs = min(max_user_cbrs, cbrs);
+                max_user_dsr_bytes = min(max_user_dsr_bytes, dsrbytes);
+        }
+
+        return 0;
+
+fail:
+        for (nid--; nid >= 0; nid--)
+                free_pages((unsigned long)gru_base[nid], order);
+        return -ENOMEM;
+}
+
+#ifdef CONFIG_IA64
+
+static int get_base_irq(void)
+{
+        return IRQ_GRU;
+}
+
+#elif defined CONFIG_X86_64
+
+static void noop(unsigned int irq)
+{
+}
+
+static struct irq_chip gru_chip = {
+        .name           = "gru",
+        .mask           = noop,
+        .unmask         = noop,
+        .ack            = noop,
+};
+
+static int get_base_irq(void)
+{
+        set_irq_chip(IRQ_GRU, &gru_chip);
+        set_irq_chip(IRQ_GRU + 1, &gru_chip);
+        return IRQ_GRU;
+}
+#endif
+
+/*
+ * gru_init
+ *
+ * Called at boot or module load time to initialize the GRUs.
+ */
+static int __init gru_init(void)
+{
+        int ret, irq, chip;
+        char id[10];
+        void *gru_start_vaddr;
+
+        if (!IS_UV())
+                return 0;
+
+#if defined CONFIG_IA64
+        gru_start_paddr = 0xd000000000UL; /* ZZZZZZZZZZZZZZZZZZZ fixme */
+#else
+        gru_start_paddr = uv_read_local_mmr(UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR) &
+                                0x7fffffffffffUL;
+
+#endif
+        gru_start_vaddr = __va(gru_start_paddr);
+        gru_end_paddr = gru_start_paddr + MAX_NUMNODES * GRU_SIZE;
+        printk(KERN_INFO "GRU space: 0x%lx - 0x%lx\n",
+               gru_start_paddr, gru_end_paddr);
+        irq = get_base_irq();
+        for (chip = 0; chip < GRU_CHIPLETS_PER_BLADE; chip++) {
+                ret = request_irq(irq + chip, gru_intr, 0, id, NULL);
+                if (ret) {
+                        printk(KERN_ERR "%s: request_irq failed\n",
+                               GRU_DRIVER_ID_STR);
+                        goto exit1;
+                }
+        }
+
+        ret = misc_register(&gru_miscdev);
+        if (ret) {
+                printk(KERN_ERR "%s: misc_register failed\n",
+                       GRU_DRIVER_ID_STR);
+                goto exit1;
+        }
+
+        ret = gru_proc_init();
+        if (ret) {
+                printk(KERN_ERR "%s: proc init failed\n", GRU_DRIVER_ID_STR);
+                goto exit2;
+        }
+
+        ret = gru_init_tables(gru_start_paddr, gru_start_vaddr);
+        if (ret) {
+                printk(KERN_ERR "%s: init tables failed\n", GRU_DRIVER_ID_STR);
+                goto exit3;
+        }
+
+        printk(KERN_INFO "%s: v%s\n", GRU_DRIVER_ID_STR,
+               GRU_DRIVER_VERSION_STR);
+        return 0;
+
+exit3:
+        gru_proc_exit();
+exit2:
+        misc_deregister(&gru_miscdev);
+exit1:
+        for (--chip; chip >= 0; chip--)
+                free_irq(irq + chip, NULL);
+        return ret;
+
+}
+
+static void __exit gru_exit(void)
+{
+        int i, bid;
+        int order = get_order(sizeof(struct gru_state) *
+                              GRU_CHIPLETS_PER_BLADE);
+
+        for (i = 0; i < GRU_CHIPLETS_PER_BLADE; i++)
+                free_irq(IRQ_GRU + i, NULL);
+
+        for (bid = 0; bid < GRU_MAX_BLADES; bid++)
+                free_pages((unsigned long)gru_base[bid], order);
+
+        misc_deregister(&gru_miscdev);
+        gru_proc_exit();
+}
+
+static struct file_operations gru_fops = {
+        .owner          = THIS_MODULE,
+        .unlocked_ioctl = gru_file_unlocked_ioctl,
+        .mmap           = gru_file_mmap,
+};
+
+static struct miscdevice gru_miscdev = {
+        .minor          = MISC_DYNAMIC_MINOR,
+        .name           = "gru",
+        .fops           = &gru_fops,
+};
+
+struct vm_operations_struct gru_vm_ops = {
+        .close          = gru_vma_close,
+        .fault          = gru_fault,
+};
+
+module_init(gru_init);
+module_exit(gru_exit);
+
+module_param(gru_options, ulong, 0644);
+MODULE_PARM_DESC(gru_options, "Various debug options");
+
+MODULE_AUTHOR("Silicon Graphics, Inc.");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION(GRU_DRIVER_ID_STR GRU_DRIVER_VERSION_STR);
+MODULE_VERSION(GRU_DRIVER_VERSION_STR);
+
diff --git a/drivers/misc/sgi-gru/gruhandles.h b/drivers/misc/sgi-gru/gruhandles.h
new file mode 100644
index 000000000000..d16031d62673
--- /dev/null
+++ b/drivers/misc/sgi-gru/gruhandles.h
@@ -0,0 +1,663 @@
+/*
+ * SN Platform GRU Driver
+ *
+ *              GRU HANDLE DEFINITION
+ *
+ *  Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef __GRUHANDLES_H__
+#define __GRUHANDLES_H__
+#include "gru_instructions.h"
+
+/*
+ * Manifest constants for GRU Memory Map
+ */
+#define GRU_GSEG0_BASE          0
+#define GRU_MCS_BASE            (64 * 1024 * 1024)
+#define GRU_SIZE                (128UL * 1024 * 1024)
+
+/* Handle & resource counts */
+#define GRU_NUM_CB              128
+#define GRU_NUM_DSR_BYTES       (32 * 1024)
+#define GRU_NUM_TFM             16
+#define GRU_NUM_TGH             24
+#define GRU_NUM_CBE             128
+#define GRU_NUM_TFH             128
+#define GRU_NUM_CCH             16
+#define GRU_NUM_GSH             1
+
+/* Maximum resource counts that can be reserved by user programs */
+#define GRU_NUM_USER_CBR        GRU_NUM_CBE
+#define GRU_NUM_USER_DSR_BYTES  GRU_NUM_DSR_BYTES
+
+/* Bytes per handle & handle stride. Code assumes all cb, tfh, cbe handles
+ * are the same */
+#define GRU_HANDLE_BYTES        64
+#define GRU_HANDLE_STRIDE       256
+
+/* Base addresses of handles */
+#define GRU_TFM_BASE            (GRU_MCS_BASE + 0x00000)
+#define GRU_TGH_BASE            (GRU_MCS_BASE + 0x08000)
+#define GRU_CBE_BASE            (GRU_MCS_BASE + 0x10000)
+#define GRU_TFH_BASE            (GRU_MCS_BASE + 0x18000)
+#define GRU_CCH_BASE            (GRU_MCS_BASE + 0x20000)
+#define GRU_GSH_BASE            (GRU_MCS_BASE + 0x30000)
+
+/* User gseg constants */
+#define GRU_GSEG_STRIDE         (4 * 1024 * 1024)
+#define GSEG_BASE(a)            ((a) & ~(GRU_GSEG_PAGESIZE - 1))
+
+/* Data segment constants */
+#define GRU_DSR_AU_BYTES        1024
+#define GRU_DSR_CL              (GRU_NUM_DSR_BYTES / GRU_CACHE_LINE_BYTES)
+#define GRU_DSR_AU_CL           (GRU_DSR_AU_BYTES / GRU_CACHE_LINE_BYTES)
+#define GRU_DSR_AU              (GRU_NUM_DSR_BYTES / GRU_DSR_AU_BYTES)
+
+/* Control block constants */
+#define GRU_CBR_AU_SIZE         2
+#define GRU_CBR_AU              (GRU_NUM_CBE / GRU_CBR_AU_SIZE)
+
+/* Convert resource counts to the number of AU */
+#define GRU_DS_BYTES_TO_AU(n)   DIV_ROUND_UP(n, GRU_DSR_AU_BYTES)
+#define GRU_CB_COUNT_TO_AU(n)   DIV_ROUND_UP(n, GRU_CBR_AU_SIZE)
+
+/* UV limits */
+#define GRU_CHIPLETS_PER_HUB    2
+#define GRU_HUBS_PER_BLADE      1
+#define GRU_CHIPLETS_PER_BLADE  (GRU_HUBS_PER_BLADE * GRU_CHIPLETS_PER_HUB)
+
+/* User GRU Gseg offsets */
+#define GRU_CB_BASE             0
+#define GRU_CB_LIMIT            (GRU_CB_BASE + GRU_HANDLE_STRIDE * GRU_NUM_CBE)
+#define GRU_DS_BASE             0x20000
+#define GRU_DS_LIMIT            (GRU_DS_BASE + GRU_NUM_DSR_BYTES)
+
+/* Convert a GRU physical address to the chiplet offset */
+#define GSEGPOFF(h)             ((h) & (GRU_SIZE - 1))
+
+/* Convert an arbitrary handle address to the beginning of the GRU segment */
+#ifndef __PLUGIN__
+#define GRUBASE(h)              ((void *)((unsigned long)(h) & ~(GRU_SIZE - 1)))
+#else
+extern void *gmu_grubase(void *h);
+#define GRUBASE(h)              gmu_grubase(h)
+#endif
+
+/* General addressing macros. */
+static inline void *get_gseg_base_address(void *base, int ctxnum)
+{
+        return (void *)(base + GRU_GSEG0_BASE + GRU_GSEG_STRIDE * ctxnum);
+}
+
+static inline void *get_gseg_base_address_cb(void *base, int ctxnum, int line)
+{
+        return (void *)(get_gseg_base_address(base, ctxnum) +
+                        GRU_CB_BASE + GRU_HANDLE_STRIDE * line);
+}
+
+static inline void *get_gseg_base_address_ds(void *base, int ctxnum, int line)
+{
+        return (void *)(get_gseg_base_address(base, ctxnum) + GRU_DS_BASE +
+                        GRU_CACHE_LINE_BYTES * line);
+}
+
+static inline struct gru_tlb_fault_map *get_tfm(void *base, int ctxnum)
+{
+        return (struct gru_tlb_fault_map *)(base + GRU_TFM_BASE +
+                                        ctxnum * GRU_HANDLE_STRIDE);
+}
+
+static inline struct gru_tlb_global_handle *get_tgh(void *base, int ctxnum)
+{
+        return (struct gru_tlb_global_handle *)(base + GRU_TGH_BASE +
+                                        ctxnum * GRU_HANDLE_STRIDE);
+}
+
+static inline struct gru_control_block_extended *get_cbe(void *base, int ctxnum)
+{
+        return (struct gru_control_block_extended *)(base + GRU_CBE_BASE +
+                                        ctxnum * GRU_HANDLE_STRIDE);
+}
+
+static inline struct gru_tlb_fault_handle *get_tfh(void *base, int ctxnum)
+{
+        return (struct gru_tlb_fault_handle *)(base + GRU_TFH_BASE +
+                                        ctxnum * GRU_HANDLE_STRIDE);
+}
+
+static inline struct gru_context_configuration_handle *get_cch(void *base,
+                                        int ctxnum)
+{
+        return (struct gru_context_configuration_handle *)(base +
+                                GRU_CCH_BASE + ctxnum * GRU_HANDLE_STRIDE);
+}
+
+static inline unsigned long get_cb_number(void *cb)
+{
+        return (((unsigned long)cb - GRU_CB_BASE) % GRU_GSEG_PAGESIZE) /
+                                        GRU_HANDLE_STRIDE;
+}
+
+/* byte offset to a specific GRU chiplet. (p=pnode, c=chiplet (0 or 1)*/
+static inline unsigned long gru_chiplet_paddr(unsigned long paddr, int pnode,
+                                                        int chiplet)
+{
+        return paddr + GRU_SIZE * (2 * pnode  + chiplet);
+}
+
+static inline void *gru_chiplet_vaddr(void *vaddr, int pnode, int chiplet)
+{
+        return vaddr + GRU_SIZE * (2 * pnode  + chiplet);
+}
+
+
+
+/*
+ * Global TLB Fault Map
+ *      Bitmap of outstanding TLB misses needing interrupt/polling service.
+ *
+ */
+struct gru_tlb_fault_map {
+        unsigned long fault_bits[BITS_TO_LONGS(GRU_NUM_CBE)];
+        unsigned long fill0[2];
+        unsigned long done_bits[BITS_TO_LONGS(GRU_NUM_CBE)];
+        unsigned long fill1[2];
+};
+
+/*
+ * TGH - TLB Global Handle
+ *      Used for TLB flushing.
+ *
+ */
+struct gru_tlb_global_handle {
+        unsigned int cmd:1;             /* DW 0 */
+        unsigned int delresp:1;
+        unsigned int opc:1;
+        unsigned int fill1:5;
+
+        unsigned int fill2:8;
+
+        unsigned int status:2;
+        unsigned long fill3:2;
+        unsigned int state:3;
+        unsigned long fill4:1;
+
+        unsigned int cause:3;
+        unsigned long fill5:37;
+
+        unsigned long vaddr:64;         /* DW 1 */
+
+        unsigned int asid:24;           /* DW 2 */
+        unsigned int fill6:8;
+
+        unsigned int pagesize:5;
+        unsigned int fill7:11;
+
+        unsigned int global:1;
+        unsigned int fill8:15;
+
+        unsigned long vaddrmask:39;     /* DW 3 */
+        unsigned int fill9:9;
+        unsigned int n:10;
+        unsigned int fill10:6;
+
+        unsigned int ctxbitmap:16;      /* DW4 */
+        unsigned long fill11[3];
+};
+
+enum gru_tgh_cmd {
+        TGHCMD_START
+};
+
+enum gru_tgh_opc {
+        TGHOP_TLBNOP,
+        TGHOP_TLBINV
+};
+
+enum gru_tgh_status {
+        TGHSTATUS_IDLE,
+        TGHSTATUS_EXCEPTION,
+        TGHSTATUS_ACTIVE
+};
+
+enum gru_tgh_state {
+        TGHSTATE_IDLE,
+        TGHSTATE_PE_INVAL,
+        TGHSTATE_INTERRUPT_INVAL,
+        TGHSTATE_WAITDONE,
+        TGHSTATE_RESTART_CTX,
+};
+
+/*
+ * TFH - TLB Global Handle
+ *      Used for TLB dropins into the GRU TLB.
+ *
+ */
+struct gru_tlb_fault_handle {
+        unsigned int cmd:1;             /* DW 0 - low 32*/
+        unsigned int delresp:1;
+        unsigned int fill0:2;
+        unsigned int opc:3;
+        unsigned int fill1:9;
+
+        unsigned int status:2;
+        unsigned int fill2:1;
+        unsigned int color:1;
+        unsigned int state:3;
+        unsigned int fill3:1;
+
+        unsigned int cause:7;           /* DW 0 - high 32 */
+        unsigned int fill4:1;
+
+        unsigned int indexway:12;
+        unsigned int fill5:4;
+
+        unsigned int ctxnum:4;
+        unsigned int fill6:12;
+
+        unsigned long missvaddr:64;     /* DW 1 */
+
+        unsigned int missasid:24;       /* DW 2 */
+        unsigned int fill7:8;
+        unsigned int fillasid:24;
+        unsigned int dirty:1;
+        unsigned int gaa:2;
+        unsigned long fill8:5;
+
+        unsigned long pfn:41;           /* DW 3 */
+        unsigned int fill9:7;
+        unsigned int pagesize:5;
+        unsigned int fill10:11;
+
+        unsigned long fillvaddr:64;     /* DW 4 */
+
+        unsigned long fill11[3];
+};
+
+enum gru_tfh_opc {
+        TFHOP_NOOP,
+        TFHOP_RESTART,
+        TFHOP_WRITE_ONLY,
+        TFHOP_WRITE_RESTART,
+        TFHOP_EXCEPTION,
+        TFHOP_USER_POLLING_MODE = 7,
+};
+
+enum tfh_status {
+        TFHSTATUS_IDLE,
+        TFHSTATUS_EXCEPTION,
+        TFHSTATUS_ACTIVE,
+};
+
+enum tfh_state {
+        TFHSTATE_INACTIVE,
+        TFHSTATE_IDLE,
+        TFHSTATE_MISS_UPM,
+        TFHSTATE_MISS_FMM,
+        TFHSTATE_HW_ERR,
+        TFHSTATE_WRITE_TLB,
+        TFHSTATE_RESTART_CBR,
+};
+
+/* TFH cause bits */
+enum tfh_cause {
+        TFHCAUSE_NONE,
+        TFHCAUSE_TLB_MISS,
+        TFHCAUSE_TLB_MOD,
+        TFHCAUSE_HW_ERROR_RR,
+        TFHCAUSE_HW_ERROR_MAIN_ARRAY,
+        TFHCAUSE_HW_ERROR_VALID,
+        TFHCAUSE_HW_ERROR_PAGESIZE,
+        TFHCAUSE_INSTRUCTION_EXCEPTION,
+        TFHCAUSE_UNCORRECTIBLE_ERROR,
+};
+
+/* GAA values */
+#define GAA_RAM                         0x0
+#define GAA_NCRAM                       0x2
+#define GAA_MMIO                        0x1
+#define GAA_REGISTER                    0x3
+
+/* GRU paddr shift for pfn. (NOTE: shift is NOT by actual pagesize) */
+#define GRU_PADDR_SHIFT                 12
+
+/*
+ * Context Configuration handle
+ *      Used to allocate resources to a GSEG context.
+ *
+ */
+struct gru_context_configuration_handle {
+        unsigned int cmd:1;                     /* DW0 */
+        unsigned int delresp:1;
+        unsigned int opc:3;
+        unsigned int unmap_enable:1;
+        unsigned int req_slice_set_enable:1;
+        unsigned int req_slice:2;
+        unsigned int cb_int_enable:1;
+        unsigned int tlb_int_enable:1;
+        unsigned int tfm_fault_bit_enable:1;
+        unsigned int tlb_int_select:4;
+
+        unsigned int status:2;
+        unsigned int state:2;
+        unsigned int reserved2:4;
+
+        unsigned int cause:4;
+        unsigned int tfm_done_bit_enable:1;
+        unsigned int unused:3;
+
+        unsigned int dsr_allocation_map;
+
+        unsigned long cbr_allocation_map;       /* DW1 */
+
+        unsigned int asid[8];                   /* DW 2 - 5 */
+        unsigned short sizeavail[8];            /* DW 6 - 7 */
+} __attribute__ ((packed));
+
+enum gru_cch_opc {
+        CCHOP_START = 1,
+        CCHOP_ALLOCATE,
+        CCHOP_INTERRUPT,
+        CCHOP_DEALLOCATE,
+        CCHOP_INTERRUPT_SYNC,
+};
+
+enum gru_cch_status {
+        CCHSTATUS_IDLE,
+        CCHSTATUS_EXCEPTION,
+        CCHSTATUS_ACTIVE,
+};
+
+enum gru_cch_state {
+        CCHSTATE_INACTIVE,
+        CCHSTATE_MAPPED,
+        CCHSTATE_ACTIVE,
+        CCHSTATE_INTERRUPTED,
+};
+
+/* CCH Exception cause */
+enum gru_cch_cause {
+        CCHCAUSE_REGION_REGISTER_WRITE_ERROR = 1,
+        CCHCAUSE_ILLEGAL_OPCODE = 2,
+        CCHCAUSE_INVALID_START_REQUEST = 3,
+        CCHCAUSE_INVALID_ALLOCATION_REQUEST = 4,
+        CCHCAUSE_INVALID_DEALLOCATION_REQUEST = 5,
+        CCHCAUSE_INVALID_INTERRUPT_REQUEST = 6,
+        CCHCAUSE_CCH_BUSY = 7,
+        CCHCAUSE_NO_CBRS_TO_ALLOCATE = 8,
+        CCHCAUSE_BAD_TFM_CONFIG = 9,
+        CCHCAUSE_CBR_RESOURCES_OVERSUBSCRIPED = 10,
+        CCHCAUSE_DSR_RESOURCES_OVERSUBSCRIPED = 11,
+        CCHCAUSE_CBR_DEALLOCATION_ERROR = 12,
+};
+/*
+ * CBE - Control Block Extended
+ *      Maintains internal GRU state for active CBs.
+ *
+ */
+struct gru_control_block_extended {
+        unsigned int reserved0:1;       /* DW 0  - low */
+        unsigned int imacpy:3;
+        unsigned int reserved1:4;
+        unsigned int xtypecpy:3;
+        unsigned int iaa0cpy:2;
+        unsigned int iaa1cpy:2;
+        unsigned int reserved2:1;
+        unsigned int opccpy:8;
+        unsigned int exopccpy:8;
+
+        unsigned int idef2cpy:22;       /* DW 0  - high */
+        unsigned int reserved3:10;
+
+        unsigned int idef4cpy:22;       /* DW 1 */
+        unsigned int reserved4:10;
+        unsigned int idef4upd:22;
+        unsigned int reserved5:10;
+
+        unsigned long idef1upd:64;      /* DW 2 */
+
+        unsigned long idef5cpy:64;      /* DW 3 */
+
+        unsigned long idef6cpy:64;      /* DW 4 */
+
+        unsigned long idef3upd:64;      /* DW 5 */
+
+        unsigned long idef5upd:64;      /* DW 6 */
+
+        unsigned int idef2upd:22;       /* DW 7 */
+        unsigned int reserved6:10;
+
+        unsigned int ecause:20;
+        unsigned int cbrstate:4;
+        unsigned int cbrexecstatus:8;
+};
+
+enum gru_cbr_state {
+        CBRSTATE_INACTIVE,
+        CBRSTATE_IDLE,
+        CBRSTATE_PE_CHECK,
+        CBRSTATE_QUEUED,
+        CBRSTATE_WAIT_RESPONSE,
+        CBRSTATE_INTERRUPTED,
+        CBRSTATE_INTERRUPTED_MISS_FMM,
+        CBRSTATE_BUSY_INTERRUPT_MISS_FMM,
+        CBRSTATE_INTERRUPTED_MISS_UPM,
+        CBRSTATE_BUSY_INTERRUPTED_MISS_UPM,
+        CBRSTATE_REQUEST_ISSUE,
+        CBRSTATE_BUSY_INTERRUPT,
+};
+
+/* CBE cbrexecstatus bits */
+#define CBR_EXS_ABORT_OCC_BIT                   0
+#define CBR_EXS_INT_OCC_BIT                     1
+#define CBR_EXS_PENDING_BIT                     2
+#define CBR_EXS_QUEUED_BIT                      3
+#define CBR_EXS_TLBHW_BIT                       4
+#define CBR_EXS_EXCEPTION_BIT                   5
+
+#define CBR_EXS_ABORT_OCC                       (1 << CBR_EXS_ABORT_OCC_BIT)
+#define CBR_EXS_INT_OCC                         (1 << CBR_EXS_INT_OCC_BIT)
+#define CBR_EXS_PENDING                         (1 << CBR_EXS_PENDING_BIT)
+#define CBR_EXS_QUEUED                          (1 << CBR_EXS_QUEUED_BIT)
+#define CBR_EXS_TLBHW                           (1 << CBR_EXS_TLBHW_BIT)
+#define CBR_EXS_EXCEPTION                       (1 << CBR_EXS_EXCEPTION_BIT)
+
+/* CBE ecause bits  - defined in gru_instructions.h */
+
+/*
+ * Convert a processor pagesize into the strange encoded pagesize used by the
+ * GRU. Processor pagesize is encoded as log of bytes per page. (or PAGE_SHIFT)
+ *      pagesize        log pagesize    grupagesize
+ *        4k                    12      0
+ *       16k                    14      1
+ *       64k                    16      2
+ *      256k                    18      3
+ *        1m                    20      4
+ *        2m                    21      5
+ *        4m                    22      6
+ *       16m                    24      7
+ *       64m                    26      8
+ *      ...
+ */
+#define GRU_PAGESIZE(sh)        ((((sh) > 20 ? (sh) + 2: (sh)) >> 1) - 6)
+#define GRU_SIZEAVAIL(sh)       (1UL << GRU_PAGESIZE(sh))
+
+/* minimum TLB purge count to ensure a full purge */
+#define GRUMAXINVAL             1024UL
+
+
+/* Extract the status field from a kernel handle */
+#define GET_MSEG_HANDLE_STATUS(h)       (((*(unsigned long *)(h)) >> 16) & 3)
+
+static inline void start_instruction(void *h)
+{
+        unsigned long *w0 = h;
+
+        wmb();          /* setting CMD bit must be last */
+        *w0 = *w0 | 1;
+        gru_flush_cache(h);
+}
+
+static inline int wait_instruction_complete(void *h)
+{
+        int status;
+
+        do {
+                cpu_relax();
+                barrier();
+                status = GET_MSEG_HANDLE_STATUS(h);
+        } while (status == CCHSTATUS_ACTIVE);
+        return status;
+}
+
+#if defined CONFIG_IA64
+static inline void cch_allocate_set_asids(
+                  struct gru_context_configuration_handle *cch, int asidval)
+{
+        int i;
+
+        for (i = 0; i <= RGN_HPAGE; i++) {  /*  assume HPAGE is last region */
+                cch->asid[i] = (asidval++);
+#if 0
+                /* ZZZ hugepages not supported yet */
+                if (i == RGN_HPAGE)
+                        cch->sizeavail[i] = GRU_SIZEAVAIL(hpage_shift);
+                else
+#endif
+                        cch->sizeavail[i] = GRU_SIZEAVAIL(PAGE_SHIFT);
+        }
+}
+#elif defined CONFIG_X86_64
+static inline void cch_allocate_set_asids(
+                  struct gru_context_configuration_handle *cch, int asidval)
+{
+        int i;
+
+        for (i = 0; i < 8; i++) {
+                cch->asid[i] = asidval++;
+                cch->sizeavail[i] = GRU_SIZEAVAIL(PAGE_SHIFT) |
+                        GRU_SIZEAVAIL(21);
+        }
+}
+#endif
+
+static inline int cch_allocate(struct gru_context_configuration_handle *cch,
+                               int asidval, unsigned long cbrmap,
+                               unsigned long dsrmap)
+{
+        cch_allocate_set_asids(cch, asidval);
+        cch->dsr_allocation_map = dsrmap;
+        cch->cbr_allocation_map = cbrmap;
+        cch->opc = CCHOP_ALLOCATE;
+        start_instruction(cch);
+        return wait_instruction_complete(cch);
+}
+
+static inline int cch_start(struct gru_context_configuration_handle *cch)
+{
+        cch->opc = CCHOP_START;
+        start_instruction(cch);
+        return wait_instruction_complete(cch);
+}
+
+static inline int cch_interrupt(struct gru_context_configuration_handle *cch)
+{
+        cch->opc = CCHOP_INTERRUPT;
+        start_instruction(cch);
+        return wait_instruction_complete(cch);
+}
+
+static inline int cch_deallocate(struct gru_context_configuration_handle *cch)
+{
+        cch->opc = CCHOP_DEALLOCATE;
+        start_instruction(cch);
+        return wait_instruction_complete(cch);
+}
+
+static inline int cch_interrupt_sync(struct gru_context_configuration_handle
+                                     *cch)
+{
+        cch->opc = CCHOP_INTERRUPT_SYNC;
+        start_instruction(cch);
+        return wait_instruction_complete(cch);
+}
+
+static inline int tgh_invalidate(struct gru_tlb_global_handle *tgh,
+                                 unsigned long vaddr, unsigned long vaddrmask,
+                                 int asid, int pagesize, int global, int n,
+                                 unsigned short ctxbitmap)
+{
+        tgh->vaddr = vaddr;
+        tgh->asid = asid;
+        tgh->pagesize = pagesize;
+        tgh->n = n;
+        tgh->global = global;
+        tgh->vaddrmask = vaddrmask;
+        tgh->ctxbitmap = ctxbitmap;
+        tgh->opc = TGHOP_TLBINV;
+        start_instruction(tgh);
+        return wait_instruction_complete(tgh);
+}
+
+static inline void tfh_write_only(struct gru_tlb_fault_handle *tfh,
+                                  unsigned long pfn, unsigned long vaddr,
+                                  int asid, int dirty, int pagesize)
+{
+        tfh->fillasid = asid;
+        tfh->fillvaddr = vaddr;
+        tfh->pfn = pfn;
+        tfh->dirty = dirty;
+        tfh->pagesize = pagesize;
+        tfh->opc = TFHOP_WRITE_ONLY;
+        start_instruction(tfh);
+}
+
+static inline void tfh_write_restart(struct gru_tlb_fault_handle *tfh,
+                                     unsigned long paddr, int gaa,
+                                     unsigned long vaddr, int asid, int dirty,
+                                     int pagesize)
+{
+        tfh->fillasid = asid;
+        tfh->fillvaddr = vaddr;
+        tfh->pfn = paddr >> GRU_PADDR_SHIFT;
+        tfh->gaa = gaa;
+        tfh->dirty = dirty;
+        tfh->pagesize = pagesize;
+        tfh->opc = TFHOP_WRITE_RESTART;
+        start_instruction(tfh);
+}
+
+static inline void tfh_restart(struct gru_tlb_fault_handle *tfh)
+{
+        tfh->opc = TFHOP_RESTART;
+        start_instruction(tfh);
+}
+
+static inline void tfh_user_polling_mode(struct gru_tlb_fault_handle *tfh)
+{
+        tfh->opc = TFHOP_USER_POLLING_MODE;
+        start_instruction(tfh);
+}
+
+static inline void tfh_exception(struct gru_tlb_fault_handle *tfh)
+{
+        tfh->opc = TFHOP_EXCEPTION;
+        start_instruction(tfh);
+}
+
+#endif /* __GRUHANDLES_H__ */
diff --git a/drivers/misc/sgi-gru/grukservices.c b/drivers/misc/sgi-gru/grukservices.c
new file mode 100644
index 000000000000..dfd49af0fe18
--- /dev/null
+++ b/drivers/misc/sgi-gru/grukservices.c
@@ -0,0 +1,679 @@
+/*
+ * SN Platform GRU Driver
+ *
+ *              KERNEL SERVICES THAT USE THE GRU
+ *
+ *  Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <linux/smp_lock.h>
+#include <linux/spinlock.h>
+#include <linux/device.h>
+#include <linux/miscdevice.h>
+#include <linux/proc_fs.h>
+#include <linux/interrupt.h>
+#include <linux/uaccess.h>
+#include "gru.h"
+#include "grulib.h"
+#include "grutables.h"
+#include "grukservices.h"
+#include "gru_instructions.h"
+#include <asm/uv/uv_hub.h>
+
+/*
+ * Kernel GRU Usage
+ *
+ * The following is an interim algorithm for management of kernel GRU
+ * resources. This will likely be replaced when we better understand the
+ * kernel/user requirements.
+ *
+ * At boot time, the kernel permanently reserves a fixed number of
+ * CBRs/DSRs for each cpu to use. The resources are all taken from
+ * the GRU chiplet 1 on the blade. This leaves the full set of resources
+ * of chiplet 0 available to be allocated to a single user.
+ */
+
+/* Blade percpu resources PERMANENTLY reserved for kernel use */
+#define GRU_NUM_KERNEL_CBR      1
+#define GRU_NUM_KERNEL_DSR_BYTES 256
+#define KERNEL_CTXNUM           15
+
+/* GRU instruction attributes for all instructions */
+#define IMA                     IMA_CB_DELAY
+
+/* GRU cacheline size is always 64 bytes - even on arches with 128 byte lines */
+#define __gru_cacheline_aligned__                               \
+        __attribute__((__aligned__(GRU_CACHE_LINE_BYTES)))
+
+#define MAGIC   0x1234567887654321UL
+
+/* Default retry count for GRU errors on kernel instructions */
+#define EXCEPTION_RETRY_LIMIT   3
+
+/* Status of message queue sections */
+#define MQS_EMPTY               0
+#define MQS_FULL                1
+#define MQS_NOOP                2
+
+/*----------------- RESOURCE MANAGEMENT -------------------------------------*/
+/* optimized for x86_64 */
+struct message_queue {
+        union gru_mesqhead      head __gru_cacheline_aligned__; /* CL 0 */
+        int                     qlines;                         /* DW 1 */
+        long                    hstatus[2];
+        void                    *next __gru_cacheline_aligned__;/* CL 1 */
+        void                    *limit;
+        void                    *start;
+        void                    *start2;
+        char                    data ____cacheline_aligned;     /* CL 2 */
+};
+
+/* First word in every message - used by mesq interface */
+struct message_header {
+        char    present;
+        char    present2;
+        char    lines;
+        char    fill;
+};
+
+#define QLINES(mq)      ((mq) + offsetof(struct message_queue, qlines))
+#define HSTATUS(mq, h)  ((mq) + offsetof(struct message_queue, hstatus[h]))
+
+static int gru_get_cpu_resources(int dsr_bytes, void **cb, void **dsr)
+{
+        struct gru_blade_state *bs;
+        int lcpu;
+
+        BUG_ON(dsr_bytes > GRU_NUM_KERNEL_DSR_BYTES);
+        preempt_disable();
+        bs = gru_base[uv_numa_blade_id()];
+        lcpu = uv_blade_processor_id();
+        *cb = bs->kernel_cb + lcpu * GRU_HANDLE_STRIDE;
+        *dsr = bs->kernel_dsr + lcpu * GRU_NUM_KERNEL_DSR_BYTES;
+        return 0;
+}
+
+static void gru_free_cpu_resources(void *cb, void *dsr)
+{
+        preempt_enable();
+}
+
+int gru_get_cb_exception_detail(void *cb,
+                struct control_block_extended_exc_detail *excdet)
+{
+        struct gru_control_block_extended *cbe;
+
+        cbe = get_cbe(GRUBASE(cb), get_cb_number(cb));
+        excdet->opc = cbe->opccpy;
+        excdet->exopc = cbe->exopccpy;
+        excdet->ecause = cbe->ecause;
+        excdet->exceptdet0 = cbe->idef1upd;
+        excdet->exceptdet1 = cbe->idef3upd;
+        return 0;
+}
+
+char *gru_get_cb_exception_detail_str(int ret, void *cb,
+                                      char *buf, int size)
+{
+        struct gru_control_block_status *gen = (void *)cb;
+        struct control_block_extended_exc_detail excdet;
+
+        if (ret > 0 && gen->istatus == CBS_EXCEPTION) {
+                gru_get_cb_exception_detail(cb, &excdet);
+                snprintf(buf, size,
+                        "GRU exception: cb %p, opc %d, exopc %d, ecause 0x%x,"
+                        "excdet0 0x%lx, excdet1 0x%x",
+                        gen, excdet.opc, excdet.exopc, excdet.ecause,
+                        excdet.exceptdet0, excdet.exceptdet1);
+        } else {
+                snprintf(buf, size, "No exception");
+        }
+        return buf;
+}
+
+static int gru_wait_idle_or_exception(struct gru_control_block_status *gen)
+{
+        while (gen->istatus >= CBS_ACTIVE) {
+                cpu_relax();
+                barrier();
+        }
+        return gen->istatus;
+}
+
+static int gru_retry_exception(void *cb)
+{
+        struct gru_control_block_status *gen = (void *)cb;
+        struct control_block_extended_exc_detail excdet;
+        int retry = EXCEPTION_RETRY_LIMIT;
+
+        while (1)  {
+                if (gru_get_cb_message_queue_substatus(cb))
+                        break;
+                if (gru_wait_idle_or_exception(gen) == CBS_IDLE)
+                        return CBS_IDLE;
+
+                gru_get_cb_exception_detail(cb, &excdet);
+                if (excdet.ecause & ~EXCEPTION_RETRY_BITS)
+                        break;
+                if (retry-- == 0)
+                        break;
+                gen->icmd = 1;
+                gru_flush_cache(gen);
+        }
+        return CBS_EXCEPTION;
+}
+
+int gru_check_status_proc(void *cb)
+{
+        struct gru_control_block_status *gen = (void *)cb;
+        int ret;
+
+        ret = gen->istatus;
+        if (ret != CBS_EXCEPTION)
+                return ret;
+        return gru_retry_exception(cb);
+
+}
+
+int gru_wait_proc(void *cb)
+{
+        struct gru_control_block_status *gen = (void *)cb;
+        int ret;
+
+        ret = gru_wait_idle_or_exception(gen);
+        if (ret == CBS_EXCEPTION)
+                ret = gru_retry_exception(cb);
+
+        return ret;
+}
+
+void gru_abort(int ret, void *cb, char *str)
+{
+        char buf[GRU_EXC_STR_SIZE];
+
+        panic("GRU FATAL ERROR: %s - %s\n", str,
+              gru_get_cb_exception_detail_str(ret, cb, buf, sizeof(buf)));
+}
+
+void gru_wait_abort_proc(void *cb)
+{
+        int ret;
+
+        ret = gru_wait_proc(cb);
+        if (ret)
+                gru_abort(ret, cb, "gru_wait_abort");
+}
+
+
+/*------------------------------ MESSAGE QUEUES -----------------------------*/
+
+/* Internal status . These are NOT returned to the user. */
+#define MQIE_AGAIN              -1      /* try again */
+
+
+/*
+ * Save/restore the "present" flag that is in the second line of 2-line
+ * messages
+ */
+static inline int get_present2(void *p)
+{
+        struct message_header *mhdr = p + GRU_CACHE_LINE_BYTES;
+        return mhdr->present;
+}
+
+static inline void restore_present2(void *p, int val)
+{
+        struct message_header *mhdr = p + GRU_CACHE_LINE_BYTES;
+        mhdr->present = val;
+}
+
+/*
+ * Create a message queue.
+ *      qlines - message queue size in cache lines. Includes 2-line header.
+ */
+int gru_create_message_queue(void *p, unsigned int bytes)
+{
+        struct message_queue *mq = p;
+        unsigned int qlines;
+
+        qlines = bytes / GRU_CACHE_LINE_BYTES - 2;
+        memset(mq, 0, bytes);
+        mq->start = &mq->data;
+        mq->start2 = &mq->data + (qlines / 2 - 1) * GRU_CACHE_LINE_BYTES;
+        mq->next = &mq->data;
+        mq->limit = &mq->data + (qlines - 2) * GRU_CACHE_LINE_BYTES;
+        mq->qlines = qlines;
+        mq->hstatus[0] = 0;
+        mq->hstatus[1] = 1;
+        mq->head = gru_mesq_head(2, qlines / 2 + 1);
+        return 0;
+}
+EXPORT_SYMBOL_GPL(gru_create_message_queue);
+
+/*
+ * Send a NOOP message to a message queue
+ *      Returns:
+ *               0 - if queue is full after the send. This is the normal case
+ *                   but various races can change this.
+ *              -1 - if mesq sent successfully but queue not full
+ *              >0 - unexpected error. MQE_xxx returned
+ */
+static int send_noop_message(void *cb,
+                                unsigned long mq, void *mesg)
+{
+        const struct message_header noop_header = {
+                                        .present = MQS_NOOP, .lines = 1};
+        unsigned long m;
+        int substatus, ret;
+        struct message_header save_mhdr, *mhdr = mesg;
+
+        STAT(mesq_noop);
+        save_mhdr = *mhdr;
+        *mhdr = noop_header;
+        gru_mesq(cb, mq, gru_get_tri(mhdr), 1, IMA);
+        ret = gru_wait(cb);
+
+        if (ret) {
+                substatus = gru_get_cb_message_queue_substatus(cb);
+                switch (substatus) {
+                case CBSS_NO_ERROR:
+                        STAT(mesq_noop_unexpected_error);
+                        ret = MQE_UNEXPECTED_CB_ERR;
+                        break;
+                case CBSS_LB_OVERFLOWED:
+                        STAT(mesq_noop_lb_overflow);
+                        ret = MQE_CONGESTION;
+                        break;
+                case CBSS_QLIMIT_REACHED:
+                        STAT(mesq_noop_qlimit_reached);
+                        ret = 0;
+                        break;
+                case CBSS_AMO_NACKED:
+                        STAT(mesq_noop_amo_nacked);
+                        ret = MQE_CONGESTION;
+                        break;
+                case CBSS_PUT_NACKED:
+                        STAT(mesq_noop_put_nacked);
+                        m = mq + (gru_get_amo_value_head(cb) << 6);
+                        gru_vstore(cb, m, gru_get_tri(mesg), XTYPE_CL, 1, 1,
+                                                IMA);
+                        if (gru_wait(cb) == CBS_IDLE)
+                                ret = MQIE_AGAIN;
+                        else
+                                ret = MQE_UNEXPECTED_CB_ERR;
+                        break;
+                case CBSS_PAGE_OVERFLOW:
+                default:
+                        BUG();
+                }
+        }
+        *mhdr = save_mhdr;
+        return ret;
+}
+
+/*
+ * Handle a gru_mesq full.
+ */
+static int send_message_queue_full(void *cb,
+                           unsigned long mq, void *mesg, int lines)
+{
+        union gru_mesqhead mqh;
+        unsigned int limit, head;
+        unsigned long avalue;
+        int half, qlines, save;
+
+        /* Determine if switching to first/second half of q */
+        avalue = gru_get_amo_value(cb);
+        head = gru_get_amo_value_head(cb);
+        limit = gru_get_amo_value_limit(cb);
+
+        /*
+         * Fetch "qlines" from the queue header. Since the queue may be
+         * in memory that can't be accessed using socket addresses, use
+         * the GRU to access the data. Use DSR space from the message.
+         */
+        save = *(int *)mesg;
+        gru_vload(cb, QLINES(mq), gru_get_tri(mesg), XTYPE_W, 1, 1, IMA);
+        if (gru_wait(cb) != CBS_IDLE)
+                goto cberr;
+        qlines = *(int *)mesg;
+        *(int *)mesg = save;
+        half = (limit != qlines);
+
+        if (half)
+                mqh = gru_mesq_head(qlines / 2 + 1, qlines);
+        else
+                mqh = gru_mesq_head(2, qlines / 2 + 1);
+
+        /* Try to get lock for switching head pointer */
+        gru_gamir(cb, EOP_IR_CLR, HSTATUS(mq, half), XTYPE_DW, IMA);
+        if (gru_wait(cb) != CBS_IDLE)
+                goto cberr;
+        if (!gru_get_amo_value(cb)) {
+                STAT(mesq_qf_locked);
+                return MQE_QUEUE_FULL;
+        }
+
+        /* Got the lock. Send optional NOP if queue not full, */
+        if (head != limit) {
+                if (send_noop_message(cb, mq, mesg)) {
+                        gru_gamir(cb, EOP_IR_INC, HSTATUS(mq, half),
+                                        XTYPE_DW, IMA);
+                        if (gru_wait(cb) != CBS_IDLE)
+                                goto cberr;
+                        STAT(mesq_qf_noop_not_full);
+                        return MQIE_AGAIN;
+                }
+                avalue++;
+        }
+
+        /* Then flip queuehead to other half of queue. */
+        gru_gamer(cb, EOP_ERR_CSWAP, mq, XTYPE_DW, mqh.val, avalue, IMA);
+        if (gru_wait(cb) != CBS_IDLE)
+                goto cberr;
+
+        /* If not successfully in swapping queue head, clear the hstatus lock */
+        if (gru_get_amo_value(cb) != avalue) {
+                STAT(mesq_qf_switch_head_failed);
+                gru_gamir(cb, EOP_IR_INC, HSTATUS(mq, half), XTYPE_DW, IMA);
+                if (gru_wait(cb) != CBS_IDLE)
+                        goto cberr;
+        }
+        return MQIE_AGAIN;
+cberr:
+        STAT(mesq_qf_unexpected_error);
+        return MQE_UNEXPECTED_CB_ERR;
+}
+
+
+/*
+ * Handle a gru_mesq failure. Some of these failures are software recoverable
+ * or retryable.
+ */
+static int send_message_failure(void *cb,
+                                unsigned long mq,
+                                void *mesg,
+                                int lines)
+{
+        int substatus, ret = 0;
+        unsigned long m;
+
+        substatus = gru_get_cb_message_queue_substatus(cb);
+        switch (substatus) {
+        case CBSS_NO_ERROR:
+                STAT(mesq_send_unexpected_error);
+                ret = MQE_UNEXPECTED_CB_ERR;
+                break;
+        case CBSS_LB_OVERFLOWED:
+                STAT(mesq_send_lb_overflow);
+                ret = MQE_CONGESTION;
+                break;
+        case CBSS_QLIMIT_REACHED:
+                STAT(mesq_send_qlimit_reached);
+                ret = send_message_queue_full(cb, mq, mesg, lines);
+                break;
+        case CBSS_AMO_NACKED:
+                STAT(mesq_send_amo_nacked);
+                ret = MQE_CONGESTION;
+                break;
+        case CBSS_PUT_NACKED:
+                STAT(mesq_send_put_nacked);
+                m =mq + (gru_get_amo_value_head(cb) << 6);
+                gru_vstore(cb, m, gru_get_tri(mesg), XTYPE_CL, lines, 1, IMA);
+                if (gru_wait(cb) == CBS_IDLE)
+                        ret = MQE_OK;
+                else
+                        ret = MQE_UNEXPECTED_CB_ERR;
+                break;
+        default:
+                BUG();
+        }
+        return ret;
+}
+
+/*
+ * Send a message to a message queue
+ *      cb      GRU control block to use to send message
+ *      mq      message queue
+ *      mesg    message. ust be vaddr within a GSEG
+ *      bytes   message size (<= 2 CL)
+ */
+int gru_send_message_gpa(unsigned long mq, void *mesg, unsigned int bytes)
+{
+        struct message_header *mhdr;
+        void *cb;
+        void *dsr;
+        int istatus, clines, ret;
+
+        STAT(mesq_send);
+        BUG_ON(bytes < sizeof(int) || bytes > 2 * GRU_CACHE_LINE_BYTES);
+
+        clines = (bytes + GRU_CACHE_LINE_BYTES - 1) / GRU_CACHE_LINE_BYTES;
+        if (gru_get_cpu_resources(bytes, &cb, &dsr))
+                return MQE_BUG_NO_RESOURCES;
+        memcpy(dsr, mesg, bytes);
+        mhdr = dsr;
+        mhdr->present = MQS_FULL;
+        mhdr->lines = clines;
+        if (clines == 2) {
+                mhdr->present2 = get_present2(mhdr);
+                restore_present2(mhdr, MQS_FULL);
+        }
+
+        do {
+                ret = MQE_OK;
+                gru_mesq(cb, mq, gru_get_tri(mhdr), clines, IMA);
+                istatus = gru_wait(cb);
+                if (istatus != CBS_IDLE)
+                        ret = send_message_failure(cb, mq, dsr, clines);
+        } while (ret == MQIE_AGAIN);
+        gru_free_cpu_resources(cb, dsr);
+
+        if (ret)
+                STAT(mesq_send_failed);
+        return ret;
+}
+EXPORT_SYMBOL_GPL(gru_send_message_gpa);
+
+/*
+ * Advance the receive pointer for the queue to the next message.
+ */
+void gru_free_message(void *rmq, void *mesg)
+{
+        struct message_queue *mq = rmq;
+        struct message_header *mhdr = mq->next;
+        void *next, *pnext;
+        int half = -1;
+        int lines = mhdr->lines;
+
+        if (lines == 2)
+                restore_present2(mhdr, MQS_EMPTY);
+        mhdr->present = MQS_EMPTY;
+
+        pnext = mq->next;
+        next = pnext + GRU_CACHE_LINE_BYTES * lines;
+        if (next == mq->limit) {
+                next = mq->start;
+                half = 1;
+        } else if (pnext < mq->start2 && next >= mq->start2) {
+                half = 0;
+        }
+
+        if (half >= 0)
+                mq->hstatus[half] = 1;
+        mq->next = next;
+}
+EXPORT_SYMBOL_GPL(gru_free_message);
+
+/*
+ * Get next message from message queue. Return NULL if no message
+ * present. User must call next_message() to move to next message.
+ *      rmq     message queue
+ */
+void *gru_get_next_message(void *rmq)
+{
+        struct message_queue *mq = rmq;
+        struct message_header *mhdr = mq->next;
+        int present = mhdr->present;
+
+        /* skip NOOP messages */
+        STAT(mesq_receive);
+        while (present == MQS_NOOP) {
+                gru_free_message(rmq, mhdr);
+                mhdr = mq->next;
+                present = mhdr->present;
+        }
+
+        /* Wait for both halves of 2 line messages */
+        if (present == MQS_FULL && mhdr->lines == 2 &&
+                                get_present2(mhdr) == MQS_EMPTY)
+                present = MQS_EMPTY;
+
+        if (!present) {
+                STAT(mesq_receive_none);
+                return NULL;
+        }
+
+        if (mhdr->lines == 2)
+                restore_present2(mhdr, mhdr->present2);
+
+        return mhdr;
+}
+EXPORT_SYMBOL_GPL(gru_get_next_message);
+
+/* ---------------------- GRU DATA COPY FUNCTIONS ---------------------------*/
+
+/*
+ * Copy a block of data using the GRU resources
+ */
+int gru_copy_gpa(unsigned long dest_gpa, unsigned long src_gpa,
+                                unsigned int bytes)
+{
+        void *cb;
+        void *dsr;
+        int ret;
+
+        STAT(copy_gpa);
+        if (gru_get_cpu_resources(GRU_NUM_KERNEL_DSR_BYTES, &cb, &dsr))
+                return MQE_BUG_NO_RESOURCES;
+        gru_bcopy(cb, src_gpa, dest_gpa, gru_get_tri(dsr),
+                  XTYPE_B, bytes, GRU_NUM_KERNEL_DSR_BYTES, IMA);
+        ret = gru_wait(cb);
+        gru_free_cpu_resources(cb, dsr);
+        return ret;
+}
+EXPORT_SYMBOL_GPL(gru_copy_gpa);
+
+/* ------------------- KERNEL QUICKTESTS RUN AT STARTUP ----------------*/
+/*      Temp - will delete after we gain confidence in the GRU          */
+static __cacheline_aligned unsigned long word0;
+static __cacheline_aligned unsigned long word1;
+
+static int quicktest(struct gru_state *gru)
+{
+        void *cb;
+        void *ds;
+        unsigned long *p;
+
+        cb = get_gseg_base_address_cb(gru->gs_gru_base_vaddr, KERNEL_CTXNUM, 0);
+        ds = get_gseg_base_address_ds(gru->gs_gru_base_vaddr, KERNEL_CTXNUM, 0);
+        p = ds;
+        word0 = MAGIC;
+
+        gru_vload(cb, uv_gpa(&word0), 0, XTYPE_DW, 1, 1, IMA);
+        if (gru_wait(cb) != CBS_IDLE)
+                BUG();
+
+        if (*(unsigned long *)ds != MAGIC)
+                BUG();
+        gru_vstore(cb, uv_gpa(&word1), 0, XTYPE_DW, 1, 1, IMA);
+        if (gru_wait(cb) != CBS_IDLE)
+                BUG();
+
+        if (word0 != word1 || word0 != MAGIC) {
+                printk
+                    ("GRU quicktest err: gru %d, found 0x%lx, expected 0x%lx\n",
+                     gru->gs_gid, word1, MAGIC);
+                BUG();          /* ZZZ should not be fatal */
+        }
+
+        return 0;
+}
+
+
+int gru_kservices_init(struct gru_state *gru)
+{
+        struct gru_blade_state *bs;
+        struct gru_context_configuration_handle *cch;
+        unsigned long cbr_map, dsr_map;
+        int err, num, cpus_possible;
+
+        /*
+         * Currently, resources are reserved ONLY on the second chiplet
+         * on each blade. This leaves ALL resources on chiplet 0 available
+         * for user code.
+         */
+        bs = gru->gs_blade;
+        if (gru != &bs->bs_grus[1])
+                return 0;
+
+        cpus_possible = uv_blade_nr_possible_cpus(gru->gs_blade_id);
+
+        num = GRU_NUM_KERNEL_CBR * cpus_possible;
+        cbr_map = gru_reserve_cb_resources(gru, GRU_CB_COUNT_TO_AU(num), NULL);
+        gru->gs_reserved_cbrs += num;
+
+        num = GRU_NUM_KERNEL_DSR_BYTES * cpus_possible;
+        dsr_map = gru_reserve_ds_resources(gru, GRU_DS_BYTES_TO_AU(num), NULL);
+        gru->gs_reserved_dsr_bytes += num;
+
+        gru->gs_active_contexts++;
+        __set_bit(KERNEL_CTXNUM, &gru->gs_context_map);
+        cch = get_cch(gru->gs_gru_base_vaddr, KERNEL_CTXNUM);
+
+        bs->kernel_cb = get_gseg_base_address_cb(gru->gs_gru_base_vaddr,
+                                        KERNEL_CTXNUM, 0);
+        bs->kernel_dsr = get_gseg_base_address_ds(gru->gs_gru_base_vaddr,
+                                        KERNEL_CTXNUM, 0);
+
+        lock_cch_handle(cch);
+        cch->tfm_fault_bit_enable = 0;
+        cch->tlb_int_enable = 0;
+        cch->tfm_done_bit_enable = 0;
+        cch->unmap_enable = 1;
+        err = cch_allocate(cch, 0, cbr_map, dsr_map);
+        if (err) {
+                gru_dbg(grudev,
+                        "Unable to allocate kernel CCH: gru %d, err %d\n",
+                        gru->gs_gid, err);
+                BUG();
+        }
+        if (cch_start(cch)) {
+                gru_dbg(grudev, "Unable to start kernel CCH: gru %d, err %d\n",
+                        gru->gs_gid, err);
+                BUG();
+        }
+        unlock_cch_handle(cch);
+
+        if (gru_options & GRU_QUICKLOOK)
+                quicktest(gru);
+        return 0;
+}
diff --git a/drivers/misc/sgi-gru/grukservices.h b/drivers/misc/sgi-gru/grukservices.h
new file mode 100644
index 000000000000..eb17e0a3ac61
--- /dev/null
+++ b/drivers/misc/sgi-gru/grukservices.h
@@ -0,0 +1,134 @@
+
+/*
+ *  Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef __GRU_KSERVICES_H_
+#define __GRU_KSERVICES_H_
+
+
+/*
+ * Message queues using the GRU to send/receive messages.
+ *
+ * These function allow the user to create a message queue for
+ * sending/receiving 1 or 2 cacheline messages using the GRU.
+ *
+ * Processes SENDING messages will use a kernel CBR/DSR to send
+ * the message. This is transparent to the caller.
+ *
+ * The receiver does not use any GRU resources.
+ *
+ * The functions support:
+ *      - single receiver
+ *      - multiple senders
+ *      - cross partition message
+ *
+ * Missing features ZZZ:
+ *      - user options for dealing with timeouts, queue full, etc.
+ *      - gru_create_message_queue() needs interrupt vector info
+ */
+
+/*
+ * Initialize a user allocated chunk of memory to be used as
+ * a message queue. The caller must ensure that the queue is
+ * in contiguous physical memory and is cacheline aligned.
+ *
+ * Message queue size is the total number of bytes allocated
+ * to the queue including a 2 cacheline header that is used
+ * to manage the queue.
+ *
+ *  Input:
+ *      p       pointer to user allocated memory.
+ *      bytes   size of message queue in bytes
+ *
+ *  Errors:
+ *      0       OK
+ *      >0      error
+ */
+extern int gru_create_message_queue(void *p, unsigned int bytes);
+
+/*
+ * Send a message to a message queue.
+ *
+ * Note: The message queue transport mechanism uses the first 32
+ * bits of the message. Users should avoid using these bits.
+ *
+ *
+ *   Input:
+ *      xmq     message queue - must be a UV global physical address
+ *      mesg    pointer to message. Must be 64-bit aligned
+ *      bytes   size of message in bytes
+ *
+ *   Output:
+ *      0       message sent
+ *     >0       Send failure - see error codes below
+ *
+ */
+extern int gru_send_message_gpa(unsigned long mq_gpa, void *mesg,
+                                                unsigned int bytes);
+
+/* Status values for gru_send_message() */
+#define MQE_OK                  0       /* message sent successfully */
+#define MQE_CONGESTION          1       /* temporary congestion, try again */
+#define MQE_QUEUE_FULL          2       /* queue is full */
+#define MQE_UNEXPECTED_CB_ERR   3       /* unexpected CB error */
+#define MQE_PAGE_OVERFLOW       10      /* BUG - queue overflowed a page */
+#define MQE_BUG_NO_RESOURCES    11      /* BUG - could not alloc GRU cb/dsr */
+
+/*
+ * Advance the receive pointer for the message queue to the next message.
+ * Note: current API requires messages to be gotten & freed in order. Future
+ * API extensions may allow for out-of-order freeing.
+ *
+ *   Input
+ *      mq      message queue
+ *      mesq    message being freed
+ */
+extern void gru_free_message(void *mq, void *mesq);
+
+/*
+ * Get next message from message queue. Returns pointer to
+ * message OR NULL if no message present.
+ * User must call gru_free_message() after message is processed
+ * in order to move the queue pointers to next message.
+ *
+ *   Input
+ *      mq      message queue
+ *
+ *   Output:
+ *      p       pointer to message
+ *      NULL    no message available
+ */
+extern void *gru_get_next_message(void *mq);
+
+
+/*
+ * Copy data using the GRU. Source or destination can be located in a remote
+ * partition.
+ *
+ *    Input:
+ *      dest_gpa        destination global physical address
+ *      src_gpa         source global physical address
+ *      bytes           number of bytes to copy
+ *
+ *    Output:
+ *      0               OK
+ *      >0              error
+ */
+extern int gru_copy_gpa(unsigned long dest_gpa, unsigned long src_gpa,
+                                                        unsigned int bytes);
+
+#endif          /* __GRU_KSERVICES_H_ */
diff --git a/drivers/misc/sgi-gru/grulib.h b/drivers/misc/sgi-gru/grulib.h
new file mode 100644
index 000000000000..e56e196a6998
--- /dev/null
+++ b/drivers/misc/sgi-gru/grulib.h
@@ -0,0 +1,97 @@
+/*
+ *  Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU Lesser General Public License as published by
+ *  the Free Software Foundation; either version 2.1 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU Lesser General Public License for more details.
+ *
+ *  You should have received a copy of the GNU Lesser General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef __GRULIB_H__
+#define __GRULIB_H__
+
+#define GRU_BASENAME            "gru"
+#define GRU_FULLNAME            "/dev/gru"
+#define GRU_IOCTL_NUM            'G'
+
+/*
+ * Maximum number of GRU segments that a user can have open
+ * ZZZ temp - set high for testing. Revisit.
+ */
+#define GRU_MAX_OPEN_CONTEXTS           32
+
+/* Set Number of Request Blocks */
+#define GRU_CREATE_CONTEXT              _IOWR(GRU_IOCTL_NUM, 1, void *)
+
+/* Register task as using the slice */
+#define GRU_SET_TASK_SLICE              _IOWR(GRU_IOCTL_NUM, 5, void *)
+
+/* Fetch exception detail */
+#define GRU_USER_GET_EXCEPTION_DETAIL   _IOWR(GRU_IOCTL_NUM, 6, void *)
+
+/* For user call_os handling - normally a TLB fault */
+#define GRU_USER_CALL_OS                _IOWR(GRU_IOCTL_NUM, 8, void *)
+
+/* For user unload context */
+#define GRU_USER_UNLOAD_CONTEXT         _IOWR(GRU_IOCTL_NUM, 9, void *)
+
+/* For fetching GRU chiplet status */
+#define GRU_GET_CHIPLET_STATUS          _IOWR(GRU_IOCTL_NUM, 10, void *)
+
+/* For user TLB flushing (primarily for tests) */
+#define GRU_USER_FLUSH_TLB              _IOWR(GRU_IOCTL_NUM, 50, void *)
+
+/* Get some config options (primarily for tests & emulator) */
+#define GRU_GET_CONFIG_INFO             _IOWR(GRU_IOCTL_NUM, 51, void *)
+
+#define CONTEXT_WINDOW_BYTES(th)        (GRU_GSEG_PAGESIZE * (th))
+#define THREAD_POINTER(p, th)           (p + GRU_GSEG_PAGESIZE * (th))
+
+/*
+ * Structure used to pass TLB flush parameters to the driver
+ */
+struct gru_create_context_req {
+        unsigned long           gseg;
+        unsigned int            data_segment_bytes;
+        unsigned int            control_blocks;
+        unsigned int            maximum_thread_count;
+        unsigned int            options;
+};
+
+/*
+ * Structure used to pass unload context parameters to the driver
+ */
+struct gru_unload_context_req {
+        unsigned long   gseg;
+};
+
+/*
+ * Structure used to pass TLB flush parameters to the driver
+ */
+struct gru_flush_tlb_req {
+        unsigned long   gseg;
+        unsigned long   vaddr;
+        size_t          len;
+};
+
+/*
+ * GRU configuration info (temp - for testing)
+ */
+struct gru_config_info {
+        int             cpus;
+        int             blades;
+        int             nodes;
+        int             chiplets;
+        int             fill[16];
+};
+
+#endif /* __GRULIB_H__ */
diff --git a/drivers/misc/sgi-gru/grumain.c b/drivers/misc/sgi-gru/grumain.c
new file mode 100644
index 000000000000..0eeb8dddd2f5
--- /dev/null
+++ b/drivers/misc/sgi-gru/grumain.c
@@ -0,0 +1,802 @@
+/*
+ * SN Platform GRU Driver
+ *
+ *            DRIVER TABLE MANAGER + GRU CONTEXT LOAD/UNLOAD
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <linux/spinlock.h>
+#include <linux/sched.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <asm/uv/uv_hub.h>
+#include "gru.h"
+#include "grutables.h"
+#include "gruhandles.h"
+
+unsigned long gru_options __read_mostly;
+
+static struct device_driver gru_driver = {
+        .name = "gru"
+};
+
+static struct device gru_device = {
+        .bus_id = {0},
+        .driver = &gru_driver,
+};
+
+struct device *grudev = &gru_device;
+
+/*
+ * Select a gru fault map to be used by the current cpu. Note that
+ * multiple cpus may be using the same map.
+ *      ZZZ should "shift" be used?? Depends on HT cpu numbering
+ *      ZZZ should be inline but did not work on emulator
+ */
+int gru_cpu_fault_map_id(void)
+{
+        return uv_blade_processor_id() % GRU_NUM_TFM;
+}
+
+/*--------- ASID Management -------------------------------------------
+ *
+ *  Initially, assign asids sequentially from MIN_ASID .. MAX_ASID.
+ *  Once MAX is reached, flush the TLB & start over. However,
+ *  some asids may still be in use. There won't be many (percentage wise) still
+ *  in use. Search active contexts & determine the value of the first
+ *  asid in use ("x"s below). Set "limit" to this value.
+ *  This defines a block of assignable asids.
+ *
+ *  When "limit" is reached, search forward from limit+1 and determine the
+ *  next block of assignable asids.
+ *
+ *  Repeat until MAX_ASID is reached, then start over again.
+ *
+ *  Each time MAX_ASID is reached, increment the asid generation. Since
+ *  the search for in-use asids only checks contexts with GRUs currently
+ *  assigned, asids in some contexts will be missed. Prior to loading
+ *  a context, the asid generation of the GTS asid is rechecked. If it
+ *  doesn't match the current generation, a new asid will be assigned.
+ *
+ *      0---------------x------------x---------------------x----|
+ *        ^-next        ^-limit                                 ^-MAX_ASID
+ *
+ * All asid manipulation & context loading/unloading is protected by the
+ * gs_lock.
+ */
+
+/* Hit the asid limit. Start over */
+static int gru_wrap_asid(struct gru_state *gru)
+{
+        gru_dbg(grudev, "gru %p\n", gru);
+        STAT(asid_wrap);
+        gru->gs_asid_gen++;
+        gru_flush_all_tlb(gru);
+        return MIN_ASID;
+}
+
+/* Find the next chunk of unused asids */
+static int gru_reset_asid_limit(struct gru_state *gru, int asid)
+{
+        int i, gid, inuse_asid, limit;
+
+        gru_dbg(grudev, "gru %p, asid 0x%x\n", gru, asid);
+        STAT(asid_next);
+        limit = MAX_ASID;
+        if (asid >= limit)
+                asid = gru_wrap_asid(gru);
+        gid = gru->gs_gid;
+again:
+        for (i = 0; i < GRU_NUM_CCH; i++) {
+                if (!gru->gs_gts[i])
+                        continue;
+                inuse_asid = gru->gs_gts[i]->ts_gms->ms_asids[gid].mt_asid;
+                gru_dbg(grudev, "gru %p, inuse_asid 0x%x, cxtnum %d, gts %p\n",
+                        gru, inuse_asid, i, gru->gs_gts[i]);
+                if (inuse_asid == asid) {
+                        asid += ASID_INC;
+                        if (asid >= limit) {
+                                /*
+                                 * empty range: reset the range limit and
+                                 * start over
+                                 */
+                                limit = MAX_ASID;
+                                if (asid >= MAX_ASID)
+                                        asid = gru_wrap_asid(gru);
+                                goto again;
+                        }
+                }
+
+                if ((inuse_asid > asid) && (inuse_asid < limit))
+                        limit = inuse_asid;
+        }
+        gru->gs_asid_limit = limit;
+        gru->gs_asid = asid;
+        gru_dbg(grudev, "gru %p, new asid 0x%x, new_limit 0x%x\n", gru, asid,
+                limit);
+        return asid;
+}
+
+/* Assign a new ASID to a thread context.  */
+static int gru_assign_asid(struct gru_state *gru)
+{
+        int asid;
+
+        spin_lock(&gru->gs_asid_lock);
+        gru->gs_asid += ASID_INC;
+        asid = gru->gs_asid;
+        if (asid >= gru->gs_asid_limit)
+                asid = gru_reset_asid_limit(gru, asid);
+        spin_unlock(&gru->gs_asid_lock);
+
+        gru_dbg(grudev, "gru %p, asid 0x%x\n", gru, asid);
+        return asid;
+}
+
+/*
+ * Clear n bits in a word. Return a word indicating the bits that were cleared.
+ * Optionally, build an array of chars that contain the bit numbers allocated.
+ */
+static unsigned long reserve_resources(unsigned long *p, int n, int mmax,
+                                       char *idx)
+{
+        unsigned long bits = 0;
+        int i;
+
+        do {
+                i = find_first_bit(p, mmax);
+                if (i == mmax)
+                        BUG();
+                __clear_bit(i, p);
+                __set_bit(i, &bits);
+                if (idx)
+                        *idx++ = i;
+        } while (--n);
+        return bits;
+}
+
+unsigned long gru_reserve_cb_resources(struct gru_state *gru, int cbr_au_count,
+                                       char *cbmap)
+{
+        return reserve_resources(&gru->gs_cbr_map, cbr_au_count, GRU_CBR_AU,
+                                 cbmap);
+}
+
+unsigned long gru_reserve_ds_resources(struct gru_state *gru, int dsr_au_count,
+                                       char *dsmap)
+{
+        return reserve_resources(&gru->gs_dsr_map, dsr_au_count, GRU_DSR_AU,
+                                 dsmap);
+}
+
+static void reserve_gru_resources(struct gru_state *gru,
+                                  struct gru_thread_state *gts)
+{
+        gru->gs_active_contexts++;
+        gts->ts_cbr_map =
+            gru_reserve_cb_resources(gru, gts->ts_cbr_au_count,
+                                     gts->ts_cbr_idx);
+        gts->ts_dsr_map =
+            gru_reserve_ds_resources(gru, gts->ts_dsr_au_count, NULL);
+}
+
+static void free_gru_resources(struct gru_state *gru,
+                               struct gru_thread_state *gts)
+{
+        gru->gs_active_contexts--;
+        gru->gs_cbr_map |= gts->ts_cbr_map;
+        gru->gs_dsr_map |= gts->ts_dsr_map;
+}
+
+/*
+ * Check if a GRU has sufficient free resources to satisfy an allocation
+ * request. Note: GRU locks may or may not be held when this is called. If
+ * not held, recheck after acquiring the appropriate locks.
+ *
+ * Returns 1 if sufficient resources, 0 if not
+ */
+static int check_gru_resources(struct gru_state *gru, int cbr_au_count,
+                               int dsr_au_count, int max_active_contexts)
+{
+        return hweight64(gru->gs_cbr_map) >= cbr_au_count
+                && hweight64(gru->gs_dsr_map) >= dsr_au_count
+                && gru->gs_active_contexts < max_active_contexts;
+}
+
+/*
+ * TLB manangment requires tracking all GRU chiplets that have loaded a GSEG
+ * context.
+ */
+static int gru_load_mm_tracker(struct gru_state *gru, struct gru_mm_struct *gms,
+                               int ctxnum)
+{
+        struct gru_mm_tracker *asids = &gms->ms_asids[gru->gs_gid];
+        unsigned short ctxbitmap = (1 << ctxnum);
+        int asid;
+
+        spin_lock(&gms->ms_asid_lock);
+        asid = asids->mt_asid;
+
+        if (asid == 0 || asids->mt_asid_gen != gru->gs_asid_gen) {
+                asid = gru_assign_asid(gru);
+                asids->mt_asid = asid;
+                asids->mt_asid_gen = gru->gs_asid_gen;
+                STAT(asid_new);
+        } else {
+                STAT(asid_reuse);
+        }
+
+        BUG_ON(asids->mt_ctxbitmap & ctxbitmap);
+        asids->mt_ctxbitmap |= ctxbitmap;
+        if (!test_bit(gru->gs_gid, gms->ms_asidmap))
+                __set_bit(gru->gs_gid, gms->ms_asidmap);
+        spin_unlock(&gms->ms_asid_lock);
+
+        gru_dbg(grudev,
+                "gru %x, gms %p, ctxnum 0x%d, asid 0x%x, asidmap 0x%lx\n",
+                gru->gs_gid, gms, ctxnum, asid, gms->ms_asidmap[0]);
+        return asid;
+}
+
+static void gru_unload_mm_tracker(struct gru_state *gru,
+                                  struct gru_mm_struct *gms, int ctxnum)
+{
+        struct gru_mm_tracker *asids;
+        unsigned short ctxbitmap;
+
+        asids = &gms->ms_asids[gru->gs_gid];
+        ctxbitmap = (1 << ctxnum);
+        spin_lock(&gms->ms_asid_lock);
+        BUG_ON((asids->mt_ctxbitmap & ctxbitmap) != ctxbitmap);
+        asids->mt_ctxbitmap ^= ctxbitmap;
+        gru_dbg(grudev, "gru %x, gms %p, ctxnum 0x%d, asidmap 0x%lx\n",
+                gru->gs_gid, gms, ctxnum, gms->ms_asidmap[0]);
+        spin_unlock(&gms->ms_asid_lock);
+}
+
+/*
+ * Decrement the reference count on a GTS structure. Free the structure
+ * if the reference count goes to zero.
+ */
+void gts_drop(struct gru_thread_state *gts)
+{
+        if (gts && atomic_dec_return(&gts->ts_refcnt) == 0) {
+                gru_drop_mmu_notifier(gts->ts_gms);
+                kfree(gts);
+                STAT(gts_free);
+        }
+}
+
+/*
+ * Locate the GTS structure for the current thread.
+ */
+static struct gru_thread_state *gru_find_current_gts_nolock(struct gru_vma_data
+                            *vdata, int tsid)
+{
+        struct gru_thread_state *gts;
+
+        list_for_each_entry(gts, &vdata->vd_head, ts_next)
+            if (gts->ts_tsid == tsid)
+                return gts;
+        return NULL;
+}
+
+/*
+ * Allocate a thread state structure.
+ */
+static struct gru_thread_state *gru_alloc_gts(struct vm_area_struct *vma,
+                                              struct gru_vma_data *vdata,
+                                              int tsid)
+{
+        struct gru_thread_state *gts;
+        int bytes;
+
+        bytes = DSR_BYTES(vdata->vd_dsr_au_count) +
+                                CBR_BYTES(vdata->vd_cbr_au_count);
+        bytes += sizeof(struct gru_thread_state);
+        gts = kzalloc(bytes, GFP_KERNEL);
+        if (!gts)
+                return NULL;
+
+        STAT(gts_alloc);
+        atomic_set(&gts->ts_refcnt, 1);
+        mutex_init(&gts->ts_ctxlock);
+        gts->ts_cbr_au_count = vdata->vd_cbr_au_count;
+        gts->ts_dsr_au_count = vdata->vd_dsr_au_count;
+        gts->ts_user_options = vdata->vd_user_options;
+        gts->ts_tsid = tsid;
+        gts->ts_user_options = vdata->vd_user_options;
+        gts->ts_ctxnum = NULLCTX;
+        gts->ts_mm = current->mm;
+        gts->ts_vma = vma;
+        gts->ts_tlb_int_select = -1;
+        gts->ts_gms = gru_register_mmu_notifier();
+        if (!gts->ts_gms)
+                goto err;
+
+        gru_dbg(grudev, "alloc vdata %p, new gts %p\n", vdata, gts);
+        return gts;
+
+err:
+        gts_drop(gts);
+        return NULL;
+}
+
+/*
+ * Allocate a vma private data structure.
+ */
+struct gru_vma_data *gru_alloc_vma_data(struct vm_area_struct *vma, int tsid)
+{
+        struct gru_vma_data *vdata = NULL;
+
+        vdata = kmalloc(sizeof(*vdata), GFP_KERNEL);
+        if (!vdata)
+                return NULL;
+
+        INIT_LIST_HEAD(&vdata->vd_head);
+        spin_lock_init(&vdata->vd_lock);
+        gru_dbg(grudev, "alloc vdata %p\n", vdata);
+        return vdata;
+}
+
+/*
+ * Find the thread state structure for the current thread.
+ */
+struct gru_thread_state *gru_find_thread_state(struct vm_area_struct *vma,
+                                        int tsid)
+{
+        struct gru_vma_data *vdata = vma->vm_private_data;
+        struct gru_thread_state *gts;
+
+        spin_lock(&vdata->vd_lock);
+        gts = gru_find_current_gts_nolock(vdata, tsid);
+        spin_unlock(&vdata->vd_lock);
+        gru_dbg(grudev, "vma %p, gts %p\n", vma, gts);
+        return gts;
+}
+
+/*
+ * Allocate a new thread state for a GSEG. Note that races may allow
+ * another thread to race to create a gts.
+ */
+struct gru_thread_state *gru_alloc_thread_state(struct vm_area_struct *vma,
+                                        int tsid)
+{
+        struct gru_vma_data *vdata = vma->vm_private_data;
+        struct gru_thread_state *gts, *ngts;
+
+        gts = gru_alloc_gts(vma, vdata, tsid);
+        if (!gts)
+                return NULL;
+
+        spin_lock(&vdata->vd_lock);
+        ngts = gru_find_current_gts_nolock(vdata, tsid);
+        if (ngts) {
+                gts_drop(gts);
+                gts = ngts;
+                STAT(gts_double_allocate);
+        } else {
+                list_add(&gts->ts_next, &vdata->vd_head);
+        }
+        spin_unlock(&vdata->vd_lock);
+        gru_dbg(grudev, "vma %p, gts %p\n", vma, gts);
+        return gts;
+}
+
+/*
+ * Free the GRU context assigned to the thread state.
+ */
+static void gru_free_gru_context(struct gru_thread_state *gts)
+{
+        struct gru_state *gru;
+
+        gru = gts->ts_gru;
+        gru_dbg(grudev, "gts %p, gru %p\n", gts, gru);
+
+        spin_lock(&gru->gs_lock);
+        gru->gs_gts[gts->ts_ctxnum] = NULL;
+        free_gru_resources(gru, gts);
+        BUG_ON(test_bit(gts->ts_ctxnum, &gru->gs_context_map) == 0);
+        __clear_bit(gts->ts_ctxnum, &gru->gs_context_map);
+        gts->ts_ctxnum = NULLCTX;
+        gts->ts_gru = NULL;
+        spin_unlock(&gru->gs_lock);
+
+        gts_drop(gts);
+        STAT(free_context);
+}
+
+/*
+ * Prefetching cachelines help hardware performance.
+ * (Strictly a performance enhancement. Not functionally required).
+ */
+static void prefetch_data(void *p, int num, int stride)
+{
+        while (num-- > 0) {
+                prefetchw(p);
+                p += stride;
+        }
+}
+
+static inline long gru_copy_handle(void *d, void *s)
+{
+        memcpy(d, s, GRU_HANDLE_BYTES);
+        return GRU_HANDLE_BYTES;
+}
+
+/* rewrite in assembly & use lots of prefetch */
+static void gru_load_context_data(void *save, void *grubase, int ctxnum,
+                                  unsigned long cbrmap, unsigned long dsrmap)
+{
+        void *gseg, *cb, *cbe;
+        unsigned long length;
+        int i, scr;
+
+        gseg = grubase + ctxnum * GRU_GSEG_STRIDE;
+        length = hweight64(dsrmap) * GRU_DSR_AU_BYTES;
+        prefetch_data(gseg + GRU_DS_BASE, length / GRU_CACHE_LINE_BYTES,
+                      GRU_CACHE_LINE_BYTES);
+
+        cb = gseg + GRU_CB_BASE;
+        cbe = grubase + GRU_CBE_BASE;
+        for_each_cbr_in_allocation_map(i, &cbrmap, scr) {
+                prefetch_data(cb, 1, GRU_CACHE_LINE_BYTES);
+                prefetch_data(cbe + i * GRU_HANDLE_STRIDE, 1,
+                              GRU_CACHE_LINE_BYTES);
+                cb += GRU_HANDLE_STRIDE;
+        }
+
+        cb = gseg + GRU_CB_BASE;
+        for_each_cbr_in_allocation_map(i, &cbrmap, scr) {
+                save += gru_copy_handle(cb, save);
+                save += gru_copy_handle(cbe + i * GRU_HANDLE_STRIDE, save);
+                cb += GRU_HANDLE_STRIDE;
+        }
+
+        memcpy(gseg + GRU_DS_BASE, save, length);
+}
+
+static void gru_unload_context_data(void *save, void *grubase, int ctxnum,
+                                    unsigned long cbrmap, unsigned long dsrmap)
+{
+        void *gseg, *cb, *cbe;
+        unsigned long length;
+        int i, scr;
+
+        gseg = grubase + ctxnum * GRU_GSEG_STRIDE;
+
+        cb = gseg + GRU_CB_BASE;
+        cbe = grubase + GRU_CBE_BASE;
+        for_each_cbr_in_allocation_map(i, &cbrmap, scr) {
+                save += gru_copy_handle(save, cb);
+                save += gru_copy_handle(save, cbe + i * GRU_HANDLE_STRIDE);
+                cb += GRU_HANDLE_STRIDE;
+        }
+        length = hweight64(dsrmap) * GRU_DSR_AU_BYTES;
+        memcpy(save, gseg + GRU_DS_BASE, length);
+}
+
+void gru_unload_context(struct gru_thread_state *gts, int savestate)
+{
+        struct gru_state *gru = gts->ts_gru;
+        struct gru_context_configuration_handle *cch;
+        int ctxnum = gts->ts_ctxnum;
+
+        zap_vma_ptes(gts->ts_vma, UGRUADDR(gts), GRU_GSEG_PAGESIZE);
+        cch = get_cch(gru->gs_gru_base_vaddr, ctxnum);
+
+        lock_cch_handle(cch);
+        if (cch_interrupt_sync(cch))
+                BUG();
+        gru_dbg(grudev, "gts %p\n", gts);
+
+        gru_unload_mm_tracker(gru, gts->ts_gms, gts->ts_ctxnum);
+        if (savestate)
+                gru_unload_context_data(gts->ts_gdata, gru->gs_gru_base_vaddr,
+                                        ctxnum, gts->ts_cbr_map,
+                                        gts->ts_dsr_map);
+
+        if (cch_deallocate(cch))
+                BUG();
+        gts->ts_force_unload = 0;       /* ts_force_unload locked by CCH lock */
+        unlock_cch_handle(cch);
+
+        gru_free_gru_context(gts);
+        STAT(unload_context);
+}
+
+/*
+ * Load a GRU context by copying it from the thread data structure in memory
+ * to the GRU.
+ */
+static void gru_load_context(struct gru_thread_state *gts)
+{
+        struct gru_state *gru = gts->ts_gru;
+        struct gru_context_configuration_handle *cch;
+        int err, asid, ctxnum = gts->ts_ctxnum;
+
+        gru_dbg(grudev, "gts %p\n", gts);
+        cch = get_cch(gru->gs_gru_base_vaddr, ctxnum);
+
+        lock_cch_handle(cch);
+        asid = gru_load_mm_tracker(gru, gts->ts_gms, gts->ts_ctxnum);
+        cch->tfm_fault_bit_enable =
+            (gts->ts_user_options == GRU_OPT_MISS_FMM_POLL
+             || gts->ts_user_options == GRU_OPT_MISS_FMM_INTR);
+        cch->tlb_int_enable = (gts->ts_user_options == GRU_OPT_MISS_FMM_INTR);
+        if (cch->tlb_int_enable) {
+                gts->ts_tlb_int_select = gru_cpu_fault_map_id();
+                cch->tlb_int_select = gts->ts_tlb_int_select;
+        }
+        cch->tfm_done_bit_enable = 0;
+        err = cch_allocate(cch, asid, gts->ts_cbr_map, gts->ts_dsr_map);
+        if (err) {
+                gru_dbg(grudev,
+                        "err %d: cch %p, gts %p, cbr 0x%lx, dsr 0x%lx\n",
+                        err, cch, gts, gts->ts_cbr_map, gts->ts_dsr_map);
+                BUG();
+        }
+
+        gru_load_context_data(gts->ts_gdata, gru->gs_gru_base_vaddr, ctxnum,
+                              gts->ts_cbr_map, gts->ts_dsr_map);
+
+        if (cch_start(cch))
+                BUG();
+        unlock_cch_handle(cch);
+
+        STAT(load_context);
+}
+
+/*
+ * Update fields in an active CCH:
+ *      - retarget interrupts on local blade
+ *      - force a delayed context unload by clearing the CCH asids. This
+ *        forces TLB misses for new GRU instructions. The context is unloaded
+ *        when the next TLB miss occurs.
+ */
+static int gru_update_cch(struct gru_thread_state *gts, int int_select)
+{
+        struct gru_context_configuration_handle *cch;
+        struct gru_state *gru = gts->ts_gru;
+        int i, ctxnum = gts->ts_ctxnum, ret = 0;
+
+        cch = get_cch(gru->gs_gru_base_vaddr, ctxnum);
+
+        lock_cch_handle(cch);
+        if (cch->state == CCHSTATE_ACTIVE) {
+                if (gru->gs_gts[gts->ts_ctxnum] != gts)
+                        goto exit;
+                if (cch_interrupt(cch))
+                        BUG();
+                if (int_select >= 0) {
+                        gts->ts_tlb_int_select = int_select;
+                        cch->tlb_int_select = int_select;
+                } else {
+                        for (i = 0; i < 8; i++)
+                                cch->asid[i] = 0;
+                        cch->tfm_fault_bit_enable = 0;
+                        cch->tlb_int_enable = 0;
+                        gts->ts_force_unload = 1;
+                }
+                if (cch_start(cch))
+                        BUG();
+                ret = 1;
+        }
+exit:
+        unlock_cch_handle(cch);
+        return ret;
+}
+
+/*
+ * Update CCH tlb interrupt select. Required when all the following is true:
+ *      - task's GRU context is loaded into a GRU
+ *      - task is using interrupt notification for TLB faults
+ *      - task has migrated to a different cpu on the same blade where
+ *        it was previously running.
+ */
+static int gru_retarget_intr(struct gru_thread_state *gts)
+{
+        if (gts->ts_tlb_int_select < 0
+            || gts->ts_tlb_int_select == gru_cpu_fault_map_id())
+                return 0;
+
+        gru_dbg(grudev, "retarget from %d to %d\n", gts->ts_tlb_int_select,
+                gru_cpu_fault_map_id());
+        return gru_update_cch(gts, gru_cpu_fault_map_id());
+}
+
+
+/*
+ * Insufficient GRU resources available on the local blade. Steal a context from
+ * a process. This is a hack until a _real_ resource scheduler is written....
+ */
+#define next_ctxnum(n)  ((n) <  GRU_NUM_CCH - 2 ? (n) + 1 : 0)
+#define next_gru(b, g)  (((g) < &(b)->bs_grus[GRU_CHIPLETS_PER_BLADE - 1]) ?  \
+                                 ((g)+1) : &(b)->bs_grus[0])
+
+static void gru_steal_context(struct gru_thread_state *gts)
+{
+        struct gru_blade_state *blade;
+        struct gru_state *gru, *gru0;
+        struct gru_thread_state *ngts = NULL;
+        int ctxnum, ctxnum0, flag = 0, cbr, dsr;
+
+        cbr = gts->ts_cbr_au_count;
+        dsr = gts->ts_dsr_au_count;
+
+        preempt_disable();
+        blade = gru_base[uv_numa_blade_id()];
+        spin_lock(&blade->bs_lock);
+
+        ctxnum = next_ctxnum(blade->bs_lru_ctxnum);
+        gru = blade->bs_lru_gru;
+        if (ctxnum == 0)
+                gru = next_gru(blade, gru);
+        ctxnum0 = ctxnum;
+        gru0 = gru;
+        while (1) {
+                if (check_gru_resources(gru, cbr, dsr, GRU_NUM_CCH))
+                        break;
+                spin_lock(&gru->gs_lock);
+                for (; ctxnum < GRU_NUM_CCH; ctxnum++) {
+                        if (flag && gru == gru0 && ctxnum == ctxnum0)
+                                break;
+                        ngts = gru->gs_gts[ctxnum];
+                        /*
+                         * We are grabbing locks out of order, so trylock is
+                         * needed. GTSs are usually not locked, so the odds of
+                         * success are high. If trylock fails, try to steal a
+                         * different GSEG.
+                         */
+                        if (ngts && mutex_trylock(&ngts->ts_ctxlock))
+                                break;
+                        ngts = NULL;
+                        flag = 1;
+                }
+                spin_unlock(&gru->gs_lock);
+                if (ngts || (flag && gru == gru0 && ctxnum == ctxnum0))
+                        break;
+                ctxnum = 0;
+                gru = next_gru(blade, gru);
+        }
+        blade->bs_lru_gru = gru;
+        blade->bs_lru_ctxnum = ctxnum;
+        spin_unlock(&blade->bs_lock);
+        preempt_enable();
+
+        if (ngts) {
+                STAT(steal_context);
+                ngts->ts_steal_jiffies = jiffies;
+                gru_unload_context(ngts, 1);
+                mutex_unlock(&ngts->ts_ctxlock);
+        } else {
+                STAT(steal_context_failed);
+        }
+        gru_dbg(grudev,
+                "stole gru %x, ctxnum %d from gts %p. Need cb %d, ds %d;"
+                " avail cb %ld, ds %ld\n",
+                gru->gs_gid, ctxnum, ngts, cbr, dsr, hweight64(gru->gs_cbr_map),
+                hweight64(gru->gs_dsr_map));
+}
+
+/*
+ * Scan the GRUs on the local blade & assign a GRU context.
+ */
+static struct gru_state *gru_assign_gru_context(struct gru_thread_state *gts)
+{
+        struct gru_state *gru, *grux;
+        int i, max_active_contexts;
+
+        preempt_disable();
+
+again:
+        gru = NULL;
+        max_active_contexts = GRU_NUM_CCH;
+        for_each_gru_on_blade(grux, uv_numa_blade_id(), i) {
+                if (check_gru_resources(grux, gts->ts_cbr_au_count,
+                                        gts->ts_dsr_au_count,
+                                        max_active_contexts)) {
+                        gru = grux;
+                        max_active_contexts = grux->gs_active_contexts;
+                        if (max_active_contexts == 0)
+                                break;
+                }
+        }
+
+        if (gru) {
+                spin_lock(&gru->gs_lock);
+                if (!check_gru_resources(gru, gts->ts_cbr_au_count,
+                                         gts->ts_dsr_au_count, GRU_NUM_CCH)) {
+                        spin_unlock(&gru->gs_lock);
+                        goto again;
+                }
+                reserve_gru_resources(gru, gts);
+                gts->ts_gru = gru;
+                gts->ts_ctxnum =
+                    find_first_zero_bit(&gru->gs_context_map, GRU_NUM_CCH);
+                BUG_ON(gts->ts_ctxnum == GRU_NUM_CCH);
+                atomic_inc(&gts->ts_refcnt);
+                gru->gs_gts[gts->ts_ctxnum] = gts;
+                __set_bit(gts->ts_ctxnum, &gru->gs_context_map);
+                spin_unlock(&gru->gs_lock);
+
+                STAT(assign_context);
+                gru_dbg(grudev,
+                        "gseg %p, gts %p, gru %x, ctx %d, cbr %d, dsr %d\n",
+                        gseg_virtual_address(gts->ts_gru, gts->ts_ctxnum), gts,
+                        gts->ts_gru->gs_gid, gts->ts_ctxnum,
+                        gts->ts_cbr_au_count, gts->ts_dsr_au_count);
+        } else {
+                gru_dbg(grudev, "failed to allocate a GTS %s\n", "");
+                STAT(assign_context_failed);
+        }
+
+        preempt_enable();
+        return gru;
+}
+
+/*
+ * gru_nopage
+ *
+ * Map the user's GRU segment
+ *
+ *      Note: gru segments alway mmaped on GRU_GSEG_PAGESIZE boundaries.
+ */
+int gru_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
+{
+        struct gru_thread_state *gts;
+        unsigned long paddr, vaddr;
+
+        vaddr = (unsigned long)vmf->virtual_address;
+        gru_dbg(grudev, "vma %p, vaddr 0x%lx (0x%lx)\n",
+                vma, vaddr, GSEG_BASE(vaddr));
+        STAT(nopfn);
+
+        /* The following check ensures vaddr is a valid address in the VMA */
+        gts = gru_find_thread_state(vma, TSID(vaddr, vma));
+        if (!gts)
+                return VM_FAULT_SIGBUS;
+
+again:
+        preempt_disable();
+        mutex_lock(&gts->ts_ctxlock);
+        if (gts->ts_gru) {
+                if (gts->ts_gru->gs_blade_id != uv_numa_blade_id()) {
+                        STAT(migrated_nopfn_unload);
+                        gru_unload_context(gts, 1);
+                } else {
+                        if (gru_retarget_intr(gts))
+                                STAT(migrated_nopfn_retarget);
+                }
+        }
+
+        if (!gts->ts_gru) {
+                if (!gru_assign_gru_context(gts)) {
+                        mutex_unlock(&gts->ts_ctxlock);
+                        preempt_enable();
+                        schedule_timeout(GRU_ASSIGN_DELAY);  /* true hack ZZZ */
+                        if (gts->ts_steal_jiffies + GRU_STEAL_DELAY < jiffies)
+                                gru_steal_context(gts);
+                        goto again;
+                }
+                gru_load_context(gts);
+                paddr = gseg_physical_address(gts->ts_gru, gts->ts_ctxnum);
+                remap_pfn_range(vma, vaddr & ~(GRU_GSEG_PAGESIZE - 1),
+                                paddr >> PAGE_SHIFT, GRU_GSEG_PAGESIZE,
+                                vma->vm_page_prot);
+        }
+
+        mutex_unlock(&gts->ts_ctxlock);
+        preempt_enable();
+
+        return VM_FAULT_NOPAGE;
+}
+
diff --git a/drivers/misc/sgi-gru/gruprocfs.c b/drivers/misc/sgi-gru/gruprocfs.c
new file mode 100644
index 000000000000..533923f83f1a
--- /dev/null
+++ b/drivers/misc/sgi-gru/gruprocfs.c
@@ -0,0 +1,336 @@
+/*
+ * SN Platform GRU Driver
+ *
+ *              PROC INTERFACES
+ *
+ * This file supports the /proc interfaces for the GRU driver
+ *
+ *  Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include <linux/proc_fs.h>
+#include <linux/device.h>
+#include <linux/seq_file.h>
+#include <linux/uaccess.h>
+#include "gru.h"
+#include "grulib.h"
+#include "grutables.h"
+
+#define printstat(s, f)         printstat_val(s, &gru_stats.f, #f)
+
+static void printstat_val(struct seq_file *s, atomic_long_t *v, char *id)
+{
+        unsigned long val = atomic_long_read(v);
+
+        if (val)
+                seq_printf(s, "%16lu %s\n", val, id);
+}
+
+static int statistics_show(struct seq_file *s, void *p)
+{
+        printstat(s, vdata_alloc);
+        printstat(s, vdata_free);
+        printstat(s, gts_alloc);
+        printstat(s, gts_free);
+        printstat(s, vdata_double_alloc);
+        printstat(s, gts_double_allocate);
+        printstat(s, assign_context);
+        printstat(s, assign_context_failed);
+        printstat(s, free_context);
+        printstat(s, load_context);
+        printstat(s, unload_context);
+        printstat(s, steal_context);
+        printstat(s, steal_context_failed);
+        printstat(s, nopfn);
+        printstat(s, break_cow);
+        printstat(s, asid_new);
+        printstat(s, asid_next);
+        printstat(s, asid_wrap);
+        printstat(s, asid_reuse);
+        printstat(s, intr);
+        printstat(s, call_os);
+        printstat(s, call_os_check_for_bug);
+        printstat(s, call_os_wait_queue);
+        printstat(s, user_flush_tlb);
+        printstat(s, user_unload_context);
+        printstat(s, user_exception);
+        printstat(s, set_task_slice);
+        printstat(s, migrate_check);
+        printstat(s, migrated_retarget);
+        printstat(s, migrated_unload);
+        printstat(s, migrated_unload_delay);
+        printstat(s, migrated_nopfn_retarget);
+        printstat(s, migrated_nopfn_unload);
+        printstat(s, tlb_dropin);
+        printstat(s, tlb_dropin_fail_no_asid);
+        printstat(s, tlb_dropin_fail_upm);
+        printstat(s, tlb_dropin_fail_invalid);
+        printstat(s, tlb_dropin_fail_range_active);
+        printstat(s, tlb_dropin_fail_idle);
+        printstat(s, tlb_dropin_fail_fmm);
+        printstat(s, mmu_invalidate_range);
+        printstat(s, mmu_invalidate_page);
+        printstat(s, mmu_clear_flush_young);
+        printstat(s, flush_tlb);
+        printstat(s, flush_tlb_gru);
+        printstat(s, flush_tlb_gru_tgh);
+        printstat(s, flush_tlb_gru_zero_asid);
+        printstat(s, copy_gpa);
+        printstat(s, mesq_receive);
+        printstat(s, mesq_receive_none);
+        printstat(s, mesq_send);
+        printstat(s, mesq_send_failed);
+        printstat(s, mesq_noop);
+        printstat(s, mesq_send_unexpected_error);
+        printstat(s, mesq_send_lb_overflow);
+        printstat(s, mesq_send_qlimit_reached);
+        printstat(s, mesq_send_amo_nacked);
+        printstat(s, mesq_send_put_nacked);
+        printstat(s, mesq_qf_not_full);
+        printstat(s, mesq_qf_locked);
+        printstat(s, mesq_qf_noop_not_full);
+        printstat(s, mesq_qf_switch_head_failed);
+        printstat(s, mesq_qf_unexpected_error);
+        printstat(s, mesq_noop_unexpected_error);
+        printstat(s, mesq_noop_lb_overflow);
+        printstat(s, mesq_noop_qlimit_reached);
+        printstat(s, mesq_noop_amo_nacked);
+        printstat(s, mesq_noop_put_nacked);
+        return 0;
+}
+
+static ssize_t statistics_write(struct file *file, const char __user *userbuf,
+                                size_t count, loff_t *data)
+{
+        memset(&gru_stats, 0, sizeof(gru_stats));
+        return count;
+}
+
+static int options_show(struct seq_file *s, void *p)
+{
+        seq_printf(s, "0x%lx\n", gru_options);
+        return 0;
+}
+
+static ssize_t options_write(struct file *file, const char __user *userbuf,
+                             size_t count, loff_t *data)
+{
+        unsigned long val;
+        char buf[80];
+
+        if (copy_from_user
+            (buf, userbuf, count < sizeof(buf) ? count : sizeof(buf)))
+                return -EFAULT;
+        if (!strict_strtoul(buf, 10, &val))
+                gru_options = val;
+
+        return count;
+}
+
+static int cch_seq_show(struct seq_file *file, void *data)
+{
+        long gid = *(long *)data;
+        int i;
+        struct gru_state *gru = GID_TO_GRU(gid);
+        struct gru_thread_state *ts;
+        const char *mode[] = { "??", "UPM", "INTR", "OS_POLL" };
+
+        if (gid == 0)
+                seq_printf(file, "#%5s%5s%6s%9s%6s%8s%8s\n", "gid", "bid",
+                           "ctx#", "pid", "cbrs", "dsbytes", "mode");
+        if (gru)
+                for (i = 0; i < GRU_NUM_CCH; i++) {
+                        ts = gru->gs_gts[i];
+                        if (!ts)
+                                continue;
+                        seq_printf(file, " %5d%5d%6d%9d%6d%8d%8s\n",
+                                   gru->gs_gid, gru->gs_blade_id, i,
+                                   ts->ts_tgid_owner,
+                                   ts->ts_cbr_au_count * GRU_CBR_AU_SIZE,
+                                   ts->ts_cbr_au_count * GRU_DSR_AU_BYTES,
+                                   mode[ts->ts_user_options &
+                                        GRU_OPT_MISS_MASK]);
+                }
+
+        return 0;
+}
+
+static int gru_seq_show(struct seq_file *file, void *data)
+{
+        long gid = *(long *)data, ctxfree, cbrfree, dsrfree;
+        struct gru_state *gru = GID_TO_GRU(gid);
+
+        if (gid == 0) {
+                seq_printf(file, "#%5s%5s%7s%6s%6s%8s%6s%6s\n", "gid", "nid",
+                           "ctx", "cbr", "dsr", "ctx", "cbr", "dsr");
+                seq_printf(file, "#%5s%5s%7s%6s%6s%8s%6s%6s\n", "", "", "busy",
+                           "busy", "busy", "free", "free", "free");
+        }
+        if (gru) {
+                ctxfree = GRU_NUM_CCH - gru->gs_active_contexts;
+                cbrfree = hweight64(gru->gs_cbr_map) * GRU_CBR_AU_SIZE;
+                dsrfree = hweight64(gru->gs_dsr_map) * GRU_DSR_AU_BYTES;
+                seq_printf(file, " %5d%5d%7ld%6ld%6ld%8ld%6ld%6ld\n",
+                           gru->gs_gid, gru->gs_blade_id, GRU_NUM_CCH - ctxfree,
+                           GRU_NUM_CBE - cbrfree, GRU_NUM_DSR_BYTES - dsrfree,
+                           ctxfree, cbrfree, dsrfree);
+        }
+
+        return 0;
+}
+
+static void seq_stop(struct seq_file *file, void *data)
+{
+}
+
+static void *seq_start(struct seq_file *file, loff_t *gid)
+{
+        if (*gid < GRU_MAX_GRUS)
+                return gid;
+        return NULL;
+}
+
+static void *seq_next(struct seq_file *file, void *data, loff_t *gid)
+{
+        (*gid)++;
+        if (*gid < GRU_MAX_GRUS)
+                return gid;
+        return NULL;
+}
+
+static const struct seq_operations cch_seq_ops = {
+        .start  = seq_start,
+        .next   = seq_next,
+        .stop   = seq_stop,
+        .show   = cch_seq_show
+};
+
+static const struct seq_operations gru_seq_ops = {
+        .start  = seq_start,
+        .next   = seq_next,
+        .stop   = seq_stop,
+        .show   = gru_seq_show
+};
+
+static int statistics_open(struct inode *inode, struct file *file)
+{
+        return single_open(file, statistics_show, NULL);
+}
+
+static int options_open(struct inode *inode, struct file *file)
+{
+        return single_open(file, options_show, NULL);
+}
+
+static int cch_open(struct inode *inode, struct file *file)
+{
+        return seq_open(file, &cch_seq_ops);
+}
+
+static int gru_open(struct inode *inode, struct file *file)
+{
+        return seq_open(file, &gru_seq_ops);
+}
+
+/* *INDENT-OFF* */
+static const struct file_operations statistics_fops = {
+        .open           = statistics_open,
+        .read           = seq_read,
+        .write          = statistics_write,
+        .llseek         = seq_lseek,
+        .release        = single_release,
+};
+
+static const struct file_operations options_fops = {
+        .open           = options_open,
+        .read           = seq_read,
+        .write          = options_write,
+        .llseek         = seq_lseek,
+        .release        = single_release,
+};
+
+static const struct file_operations cch_fops = {
+        .open           = cch_open,
+        .read           = seq_read,
+        .llseek         = seq_lseek,
+        .release        = seq_release,
+};
+static const struct file_operations gru_fops = {
+        .open           = gru_open,
+        .read           = seq_read,
+        .llseek         = seq_lseek,
+        .release        = seq_release,
+};
+
+static struct proc_entry {
+        char *name;
+        int mode;
+        const struct file_operations *fops;
+        struct proc_dir_entry *entry;
+} proc_files[] = {
+        {"statistics", 0644, &statistics_fops},
+        {"debug_options", 0644, &options_fops},
+        {"cch_status", 0444, &cch_fops},
+        {"gru_status", 0444, &gru_fops},
+        {NULL}
+};
+/* *INDENT-ON* */
+
+static struct proc_dir_entry *proc_gru __read_mostly;
+
+static int create_proc_file(struct proc_entry *p)
+{
+        p->entry = create_proc_entry(p->name, p->mode, proc_gru);
+        if (!p->entry)
+                return -1;
+        p->entry->proc_fops = p->fops;
+        return 0;
+}
+
+static void delete_proc_files(void)
+{
+        struct proc_entry *p;
+
+        if (proc_gru) {
+                for (p = proc_files; p->name; p++)
+                        if (p->entry)
+                                remove_proc_entry(p->name, proc_gru);
+                remove_proc_entry("gru", NULL);
+        }
+}
+
+int gru_proc_init(void)
+{
+        struct proc_entry *p;
+
+        proc_mkdir("sgi_uv", NULL);
+        proc_gru = proc_mkdir("sgi_uv/gru", NULL);
+
+        for (p = proc_files; p->name; p++)
+                if (create_proc_file(p))
+                        goto err;
+        return 0;
+
+err:
+        delete_proc_files();
+        return -1;
+}
+
+void gru_proc_exit(void)
+{
+        delete_proc_files();
+}
diff --git a/drivers/misc/sgi-gru/grutables.h b/drivers/misc/sgi-gru/grutables.h
new file mode 100644
index 000000000000..4251018f70ff
--- /dev/null
+++ b/drivers/misc/sgi-gru/grutables.h
@@ -0,0 +1,609 @@
+/*
+ * SN Platform GRU Driver
+ *
+ *            GRU DRIVER TABLES, MACROS, externs, etc
+ *
+ *  Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef __GRUTABLES_H__
+#define __GRUTABLES_H__
+
+/*
+ * GRU Chiplet:
+ *   The GRU is a user addressible memory accelerator. It provides
+ *   several forms of load, store, memset, bcopy instructions. In addition, it
+ *   contains special instructions for AMOs, sending messages to message
+ *   queues, etc.
+ *
+ *   The GRU is an integral part of the node controller. It connects
+ *   directly to the cpu socket. In its current implementation, there are 2
+ *   GRU chiplets in the node controller on each blade (~node).
+ *
+ *   The entire GRU memory space is fully coherent and cacheable by the cpus.
+ *
+ *   Each GRU chiplet has a physical memory map that looks like the following:
+ *
+ *      +-----------------+
+ *      |/////////////////|
+ *      |/////////////////|
+ *      |/////////////////|
+ *      |/////////////////|
+ *      |/////////////////|
+ *      |/////////////////|
+ *      |/////////////////|
+ *      |/////////////////|
+ *      +-----------------+
+ *      |  system control |
+ *      +-----------------+        _______ +-------------+
+ *      |/////////////////|       /        |             |
+ *      |/////////////////|      /         |             |
+ *      |/////////////////|     /          | instructions|
+ *      |/////////////////|    /           |             |
+ *      |/////////////////|   /            |             |
+ *      |/////////////////|  /             |-------------|
+ *      |/////////////////| /              |             |
+ *      +-----------------+                |             |
+ *      |   context 15    |                |  data       |
+ *      +-----------------+                |             |
+ *      |    ......       | \              |             |
+ *      +-----------------+  \____________ +-------------+
+ *      |   context 1     |
+ *      +-----------------+
+ *      |   context 0     |
+ *      +-----------------+
+ *
+ *   Each of the "contexts" is a chunk of memory that can be mmaped into user
+ *   space. The context consists of 2 parts:
+ *
+ *      - an instruction space that can be directly accessed by the user
+ *        to issue GRU instructions and to check instruction status.
+ *
+ *      - a data area that acts as normal RAM.
+ *
+ *   User instructions contain virtual addresses of data to be accessed by the
+ *   GRU. The GRU contains a TLB that is used to convert these user virtual
+ *   addresses to physical addresses.
+ *
+ *   The "system control" area of the GRU chiplet is used by the kernel driver
+ *   to manage user contexts and to perform functions such as TLB dropin and
+ *   purging.
+ *
+ *   One context may be reserved for the kernel and used for cross-partition
+ *   communication. The GRU will also be used to asynchronously zero out
+ *   large blocks of memory (not currently implemented).
+ *
+ *
+ * Tables:
+ *
+ *      VDATA-VMA Data          - Holds a few parameters. Head of linked list of
+ *                                GTS tables for threads using the GSEG
+ *      GTS - Gru Thread State  - contains info for managing a GSEG context. A
+ *                                GTS is allocated for each thread accessing a
+ *                                GSEG.
+ *      GTD - GRU Thread Data   - contains shadow copy of GRU data when GSEG is
+ *                                not loaded into a GRU
+ *      GMS - GRU Memory Struct - Used to manage TLB shootdowns. Tracks GRUs
+ *                                where a GSEG has been loaded. Similar to
+ *                                an mm_struct but for GRU.
+ *
+ *      GS  - GRU State         - Used to manage the state of a GRU chiplet
+ *      BS  - Blade State       - Used to manage state of all GRU chiplets
+ *                                on a blade
+ *
+ *
+ *  Normal task tables for task using GRU.
+ *              - 2 threads in process
+ *              - 2 GSEGs open in process
+ *              - GSEG1 is being used by both threads
+ *              - GSEG2 is used only by thread 2
+ *
+ *       task -->|
+ *       task ---+---> mm ->------ (notifier) -------+-> gms
+ *                     |                             |
+ *                     |--> vma -> vdata ---> gts--->|          GSEG1 (thread1)
+ *                     |                  |          |
+ *                     |                  +-> gts--->|          GSEG1 (thread2)
+ *                     |                             |
+ *                     |--> vma -> vdata ---> gts--->|          GSEG2 (thread2)
+ *                     .
+ *                     .
+ *
+ *  GSEGs are marked DONTCOPY on fork
+ *
+ * At open
+ *      file.private_data -> NULL
+ *
+ * At mmap,
+ *      vma -> vdata
+ *
+ * After gseg reference
+ *      vma -> vdata ->gts
+ *
+ * After fork
+ *   parent
+ *      vma -> vdata -> gts
+ *   child
+ *      (vma is not copied)
+ *
+ */
+
+#include <linux/rmap.h>
+#include <linux/interrupt.h>
+#include <linux/mutex.h>
+#include <linux/wait.h>
+#include <linux/mmu_notifier.h>
+#include "gru.h"
+#include "gruhandles.h"
+
+extern struct gru_stats_s gru_stats;
+extern struct gru_blade_state *gru_base[];
+extern unsigned long gru_start_paddr, gru_end_paddr;
+
+#define GRU_MAX_BLADES          MAX_NUMNODES
+#define GRU_MAX_GRUS            (GRU_MAX_BLADES * GRU_CHIPLETS_PER_BLADE)
+
+#define GRU_DRIVER_ID_STR       "SGI GRU Device Driver"
+#define GRU_DRIVER_VERSION_STR  "0.80"
+
+/*
+ * GRU statistics.
+ */
+struct gru_stats_s {
+        atomic_long_t vdata_alloc;
+        atomic_long_t vdata_free;
+        atomic_long_t gts_alloc;
+        atomic_long_t gts_free;
+        atomic_long_t vdata_double_alloc;
+        atomic_long_t gts_double_allocate;
+        atomic_long_t assign_context;
+        atomic_long_t assign_context_failed;
+        atomic_long_t free_context;
+        atomic_long_t load_context;
+        atomic_long_t unload_context;
+        atomic_long_t steal_context;
+        atomic_long_t steal_context_failed;
+        atomic_long_t nopfn;
+        atomic_long_t break_cow;
+        atomic_long_t asid_new;
+        atomic_long_t asid_next;
+        atomic_long_t asid_wrap;
+        atomic_long_t asid_reuse;
+        atomic_long_t intr;
+        atomic_long_t call_os;
+        atomic_long_t call_os_check_for_bug;
+        atomic_long_t call_os_wait_queue;
+        atomic_long_t user_flush_tlb;
+        atomic_long_t user_unload_context;
+        atomic_long_t user_exception;
+        atomic_long_t set_task_slice;
+        atomic_long_t migrate_check;
+        atomic_long_t migrated_retarget;
+        atomic_long_t migrated_unload;
+        atomic_long_t migrated_unload_delay;
+        atomic_long_t migrated_nopfn_retarget;
+        atomic_long_t migrated_nopfn_unload;
+        atomic_long_t tlb_dropin;
+        atomic_long_t tlb_dropin_fail_no_asid;
+        atomic_long_t tlb_dropin_fail_upm;
+        atomic_long_t tlb_dropin_fail_invalid;
+        atomic_long_t tlb_dropin_fail_range_active;
+        atomic_long_t tlb_dropin_fail_idle;
+        atomic_long_t tlb_dropin_fail_fmm;
+        atomic_long_t mmu_invalidate_range;
+        atomic_long_t mmu_invalidate_page;
+        atomic_long_t mmu_clear_flush_young;
+        atomic_long_t flush_tlb;
+        atomic_long_t flush_tlb_gru;
+        atomic_long_t flush_tlb_gru_tgh;
+        atomic_long_t flush_tlb_gru_zero_asid;
+
+        atomic_long_t copy_gpa;
+
+        atomic_long_t mesq_receive;
+        atomic_long_t mesq_receive_none;
+        atomic_long_t mesq_send;
+        atomic_long_t mesq_send_failed;
+        atomic_long_t mesq_noop;
+        atomic_long_t mesq_send_unexpected_error;
+        atomic_long_t mesq_send_lb_overflow;
+        atomic_long_t mesq_send_qlimit_reached;
+        atomic_long_t mesq_send_amo_nacked;
+        atomic_long_t mesq_send_put_nacked;
+        atomic_long_t mesq_qf_not_full;
+        atomic_long_t mesq_qf_locked;
+        atomic_long_t mesq_qf_noop_not_full;
+        atomic_long_t mesq_qf_switch_head_failed;
+        atomic_long_t mesq_qf_unexpected_error;
+        atomic_long_t mesq_noop_unexpected_error;
+        atomic_long_t mesq_noop_lb_overflow;
+        atomic_long_t mesq_noop_qlimit_reached;
+        atomic_long_t mesq_noop_amo_nacked;
+        atomic_long_t mesq_noop_put_nacked;
+
+};
+
+#define OPT_DPRINT      1
+#define OPT_STATS       2
+#define GRU_QUICKLOOK   4
+
+
+#define IRQ_GRU                 110     /* Starting IRQ number for interrupts */
+
+/* Delay in jiffies between attempts to assign a GRU context */
+#define GRU_ASSIGN_DELAY        ((HZ * 20) / 1000)
+
+/*
+ * If a process has it's context stolen, min delay in jiffies before trying to
+ * steal a context from another process.
+ */
+#define GRU_STEAL_DELAY         ((HZ * 200) / 1000)
+
+#define STAT(id)        do {                                            \
+                                if (gru_options & OPT_STATS)            \
+                                        atomic_long_inc(&gru_stats.id); \
+                        } while (0)
+
+#ifdef CONFIG_SGI_GRU_DEBUG
+#define gru_dbg(dev, fmt, x...)                                         \
+        do {                                                            \
+                if (gru_options & OPT_DPRINT)                           \
+                        dev_dbg(dev, "%s: " fmt, __func__, x);          \
+        } while (0)
+#else
+#define gru_dbg(x...)
+#endif
+
+/*-----------------------------------------------------------------------------
+ * ASID management
+ */
+#define MAX_ASID        0xfffff0
+#define MIN_ASID        8
+#define ASID_INC        8       /* number of regions */
+
+/* Generate a GRU asid value from a GRU base asid & a virtual address. */
+#if defined CONFIG_IA64
+#define VADDR_HI_BIT            64
+#define GRUREGION(addr)         ((addr) >> (VADDR_HI_BIT - 3) & 3)
+#elif defined __x86_64
+#define VADDR_HI_BIT            48
+#define GRUREGION(addr)         (0)             /* ZZZ could do better */
+#else
+#error "Unsupported architecture"
+#endif
+#define GRUASID(asid, addr)     ((asid) + GRUREGION(addr))
+
+/*------------------------------------------------------------------------------
+ *  File & VMS Tables
+ */
+
+struct gru_state;
+
+/*
+ * This structure is pointed to from the mmstruct via the notifier pointer.
+ * There is one of these per address space.
+ */
+struct gru_mm_tracker {
+        unsigned int            mt_asid_gen;    /* ASID wrap count */
+        int                     mt_asid;        /* current base ASID for gru */
+        unsigned short          mt_ctxbitmap;   /* bitmap of contexts using
+                                                   asid */
+};
+
+struct gru_mm_struct {
+        struct mmu_notifier     ms_notifier;
+        atomic_t                ms_refcnt;
+        spinlock_t              ms_asid_lock;   /* protects ASID assignment */
+        atomic_t                ms_range_active;/* num range_invals active */
+        char                    ms_released;
+        wait_queue_head_t       ms_wait_queue;
+        DECLARE_BITMAP(ms_asidmap, GRU_MAX_GRUS);
+        struct gru_mm_tracker   ms_asids[GRU_MAX_GRUS];
+};
+
+/*
+ * One of these structures is allocated when a GSEG is mmaped. The
+ * structure is pointed to by the vma->vm_private_data field in the vma struct.
+ */
+struct gru_vma_data {
+        spinlock_t              vd_lock;        /* Serialize access to vma */
+        struct list_head        vd_head;        /* head of linked list of gts */
+        long                    vd_user_options;/* misc user option flags */
+        int                     vd_cbr_au_count;
+        int                     vd_dsr_au_count;
+};
+
+/*
+ * One of these is allocated for each thread accessing a mmaped GRU. A linked
+ * list of these structure is hung off the struct gru_vma_data in the mm_struct.
+ */
+struct gru_thread_state {
+        struct list_head        ts_next;        /* list - head at vma-private */
+        struct mutex            ts_ctxlock;     /* load/unload CTX lock */
+        struct mm_struct        *ts_mm;         /* mm currently mapped to
+                                                   context */
+        struct vm_area_struct   *ts_vma;        /* vma of GRU context */
+        struct gru_state        *ts_gru;        /* GRU where the context is
+                                                   loaded */
+        struct gru_mm_struct    *ts_gms;        /* asid & ioproc struct */
+        unsigned long           ts_cbr_map;     /* map of allocated CBRs */
+        unsigned long           ts_dsr_map;     /* map of allocated DATA
+                                                   resources */
+        unsigned long           ts_steal_jiffies;/* jiffies when context last
+                                                    stolen */
+        long                    ts_user_options;/* misc user option flags */
+        pid_t                   ts_tgid_owner;  /* task that is using the
+                                                   context - for migration */
+        int                     ts_tsid;        /* thread that owns the
+                                                   structure */
+        int                     ts_tlb_int_select;/* target cpu if interrupts
+                                                     enabled */
+        int                     ts_ctxnum;      /* context number where the
+                                                   context is loaded */
+        atomic_t                ts_refcnt;      /* reference count GTS */
+        unsigned char           ts_dsr_au_count;/* Number of DSR resources
+                                                   required for contest */
+        unsigned char           ts_cbr_au_count;/* Number of CBR resources
+                                                   required for contest */
+        char                    ts_force_unload;/* force context to be unloaded
+                                                   after migration */
+        char                    ts_cbr_idx[GRU_CBR_AU];/* CBR numbers of each
+                                                          allocated CB */
+        unsigned long           ts_gdata[0];    /* save area for GRU data (CB,
+                                                   DS, CBE) */
+};
+
+/*
+ * Threaded programs actually allocate an array of GSEGs when a context is
+ * created. Each thread uses a separate GSEG. TSID is the index into the GSEG
+ * array.
+ */
+#define TSID(a, v)              (((a) - (v)->vm_start) / GRU_GSEG_PAGESIZE)
+#define UGRUADDR(gts)           ((gts)->ts_vma->vm_start +              \
+                                        (gts)->ts_tsid * GRU_GSEG_PAGESIZE)
+
+#define NULLCTX                 (-1)    /* if context not loaded into GRU */
+
+/*-----------------------------------------------------------------------------
+ *  GRU State Tables
+ */
+
+/*
+ * One of these exists for each GRU chiplet.
+ */
+struct gru_state {
+        struct gru_blade_state  *gs_blade;              /* GRU state for entire
+                                                           blade */
+        unsigned long           gs_gru_base_paddr;      /* Physical address of
+                                                           gru segments (64) */
+        void                    *gs_gru_base_vaddr;     /* Virtual address of
+                                                           gru segments (64) */
+        unsigned char           gs_gid;                 /* unique GRU number */
+        unsigned char           gs_tgh_local_shift;     /* used to pick TGH for
+                                                           local flush */
+        unsigned char           gs_tgh_first_remote;    /* starting TGH# for
+                                                           remote flush */
+        unsigned short          gs_blade_id;            /* blade of GRU */
+        spinlock_t              gs_asid_lock;           /* lock used for
+                                                           assigning asids */
+        spinlock_t              gs_lock;                /* lock used for
+                                                           assigning contexts */
+
+        /* -- the following are protected by the gs_asid_lock spinlock ---- */
+        unsigned int            gs_asid;                /* Next availe ASID */
+        unsigned int            gs_asid_limit;          /* Limit of available
+                                                           ASIDs */
+        unsigned int            gs_asid_gen;            /* asid generation.
+                                                           Inc on wrap */
+
+        /* --- the following fields are protected by the gs_lock spinlock --- */
+        unsigned long           gs_context_map;         /* bitmap to manage
+                                                           contexts in use */
+        unsigned long           gs_cbr_map;             /* bitmap to manage CB
+                                                           resources */
+        unsigned long           gs_dsr_map;             /* bitmap used to manage
+                                                           DATA resources */
+        unsigned int            gs_reserved_cbrs;       /* Number of kernel-
+                                                           reserved cbrs */
+        unsigned int            gs_reserved_dsr_bytes;  /* Bytes of kernel-
+                                                           reserved dsrs */
+        unsigned short          gs_active_contexts;     /* number of contexts
+                                                           in use */
+        struct gru_thread_state *gs_gts[GRU_NUM_CCH];   /* GTS currently using
+                                                           the context */
+};
+
+/*
+ * This structure contains the GRU state for all the GRUs on a blade.
+ */
+struct gru_blade_state {
+        void                    *kernel_cb;             /* First kernel
+                                                           reserved cb */
+        void                    *kernel_dsr;            /* First kernel
+                                                           reserved DSR */
+        /* ---- the following are protected by the bs_lock spinlock ---- */
+        spinlock_t              bs_lock;                /* lock used for
+                                                           stealing contexts */
+        int                     bs_lru_ctxnum;          /* STEAL - last context
+                                                           stolen */
+        struct gru_state        *bs_lru_gru;            /* STEAL - last gru
+                                                           stolen */
+
+        struct gru_state        bs_grus[GRU_CHIPLETS_PER_BLADE];
+};
+
+/*-----------------------------------------------------------------------------
+ * Address Primitives
+ */
+#define get_tfm_for_cpu(g, c)                                           \
+        ((struct gru_tlb_fault_map *)get_tfm((g)->gs_gru_base_vaddr, (c)))
+#define get_tfh_by_index(g, i)                                          \
+        ((struct gru_tlb_fault_handle *)get_tfh((g)->gs_gru_base_vaddr, (i)))
+#define get_tgh_by_index(g, i)                                          \
+        ((struct gru_tlb_global_handle *)get_tgh((g)->gs_gru_base_vaddr, (i)))
+#define get_cbe_by_index(g, i)                                          \
+        ((struct gru_control_block_extended *)get_cbe((g)->gs_gru_base_vaddr,\
+                        (i)))
+
+/*-----------------------------------------------------------------------------
+ * Useful Macros
+ */
+
+/* Given a blade# & chiplet#, get a pointer to the GRU */
+#define get_gru(b, c)           (&gru_base[b]->bs_grus[c])
+
+/* Number of bytes to save/restore when unloading/loading GRU contexts */
+#define DSR_BYTES(dsr)          ((dsr) * GRU_DSR_AU_BYTES)
+#define CBR_BYTES(cbr)          ((cbr) * GRU_HANDLE_BYTES * GRU_CBR_AU_SIZE * 2)
+
+/* Convert a user CB number to the actual CBRNUM */
+#define thread_cbr_number(gts, n) ((gts)->ts_cbr_idx[(n) / GRU_CBR_AU_SIZE] \
+                                  * GRU_CBR_AU_SIZE + (n) % GRU_CBR_AU_SIZE)
+
+/* Convert a gid to a pointer to the GRU */
+#define GID_TO_GRU(gid)                                                 \
+        (gru_base[(gid) / GRU_CHIPLETS_PER_BLADE] ?                     \
+                (&gru_base[(gid) / GRU_CHIPLETS_PER_BLADE]->            \
+                        bs_grus[(gid) % GRU_CHIPLETS_PER_BLADE]) :      \
+         NULL)
+
+/* Scan all active GRUs in a GRU bitmap */
+#define for_each_gru_in_bitmap(gid, map)                                \
+        for ((gid) = find_first_bit((map), GRU_MAX_GRUS); (gid) < GRU_MAX_GRUS;\
+                (gid)++, (gid) = find_next_bit((map), GRU_MAX_GRUS, (gid)))
+
+/* Scan all active GRUs on a specific blade */
+#define for_each_gru_on_blade(gru, nid, i)                              \
+        for ((gru) = gru_base[nid]->bs_grus, (i) = 0;                   \
+                        (i) < GRU_CHIPLETS_PER_BLADE;                   \
+                        (i)++, (gru)++)
+
+/* Scan all active GTSs on a gru. Note: must hold ss_lock to use this macro. */
+#define for_each_gts_on_gru(gts, gru, ctxnum)                           \
+        for ((ctxnum) = 0; (ctxnum) < GRU_NUM_CCH; (ctxnum)++)          \
+                if (((gts) = (gru)->gs_gts[ctxnum]))
+
+/* Scan each CBR whose bit is set in a TFM (or copy of) */
+#define for_each_cbr_in_tfm(i, map)                                     \
+        for ((i) = find_first_bit(map, GRU_NUM_CBE);                    \
+                        (i) < GRU_NUM_CBE;                              \
+                        (i)++, (i) = find_next_bit(map, GRU_NUM_CBE, i))
+
+/* Scan each CBR in a CBR bitmap. Note: multiple CBRs in an allocation unit */
+#define for_each_cbr_in_allocation_map(i, map, k)                       \
+        for ((k) = find_first_bit(map, GRU_CBR_AU); (k) < GRU_CBR_AU;   \
+                        (k) = find_next_bit(map, GRU_CBR_AU, (k) + 1))  \
+                for ((i) = (k)*GRU_CBR_AU_SIZE;                         \
+                                (i) < ((k) + 1) * GRU_CBR_AU_SIZE; (i)++)
+
+/* Scan each DSR in a DSR bitmap. Note: multiple DSRs in an allocation unit */
+#define for_each_dsr_in_allocation_map(i, map, k)                       \
+        for ((k) = find_first_bit((const unsigned long *)map, GRU_DSR_AU);\
+                        (k) < GRU_DSR_AU;                               \
+                        (k) = find_next_bit((const unsigned long *)map, \
+                                          GRU_DSR_AU, (k) + 1))         \
+                for ((i) = (k) * GRU_DSR_AU_CL;                         \
+                                (i) < ((k) + 1) * GRU_DSR_AU_CL; (i)++)
+
+#define gseg_physical_address(gru, ctxnum)                              \
+                ((gru)->gs_gru_base_paddr + ctxnum * GRU_GSEG_STRIDE)
+#define gseg_virtual_address(gru, ctxnum)                               \
+                ((gru)->gs_gru_base_vaddr + ctxnum * GRU_GSEG_STRIDE)
+
+/*-----------------------------------------------------------------------------
+ * Lock / Unlock GRU handles
+ *      Use the "delresp" bit in the handle as a "lock" bit.
+ */
+
+/* Lock hierarchy checking enabled only in emulator */
+
+static inline void __lock_handle(void *h)
+{
+        while (test_and_set_bit(1, h))
+                cpu_relax();
+}
+
+static inline void __unlock_handle(void *h)
+{
+        clear_bit(1, h);
+}
+
+static inline void lock_cch_handle(struct gru_context_configuration_handle *cch)
+{
+        __lock_handle(cch);
+}
+
+static inline void unlock_cch_handle(struct gru_context_configuration_handle
+                                     *cch)
+{
+        __unlock_handle(cch);
+}
+
+static inline void lock_tgh_handle(struct gru_tlb_global_handle *tgh)
+{
+        __lock_handle(tgh);
+}
+
+static inline void unlock_tgh_handle(struct gru_tlb_global_handle *tgh)
+{
+        __unlock_handle(tgh);
+}
+
+/*-----------------------------------------------------------------------------
+ * Function prototypes & externs
+ */
+struct gru_unload_context_req;
+
+extern struct vm_operations_struct gru_vm_ops;
+extern struct device *grudev;
+
+extern struct gru_vma_data *gru_alloc_vma_data(struct vm_area_struct *vma,
+                                int tsid);
+extern struct gru_thread_state *gru_find_thread_state(struct vm_area_struct
+                                *vma, int tsid);
+extern struct gru_thread_state *gru_alloc_thread_state(struct vm_area_struct
+                                *vma, int tsid);
+extern void gru_unload_context(struct gru_thread_state *gts, int savestate);
+extern void gts_drop(struct gru_thread_state *gts);
+extern void gru_tgh_flush_init(struct gru_state *gru);
+extern int gru_kservices_init(struct gru_state *gru);
+extern irqreturn_t gru_intr(int irq, void *dev_id);
+extern int gru_handle_user_call_os(unsigned long address);
+extern int gru_user_flush_tlb(unsigned long arg);
+extern int gru_user_unload_context(unsigned long arg);
+extern int gru_get_exception_detail(unsigned long arg);
+extern int gru_set_task_slice(long address);
+extern int gru_cpu_fault_map_id(void);
+extern struct vm_area_struct *gru_find_vma(unsigned long vaddr);
+extern void gru_flush_all_tlb(struct gru_state *gru);
+extern int gru_proc_init(void);
+extern void gru_proc_exit(void);
+
+extern unsigned long gru_reserve_cb_resources(struct gru_state *gru,
+                int cbr_au_count, char *cbmap);
+extern unsigned long gru_reserve_ds_resources(struct gru_state *gru,
+                int dsr_au_count, char *dsmap);
+extern int gru_fault(struct vm_area_struct *, struct vm_fault *vmf);
+extern struct gru_mm_struct *gru_register_mmu_notifier(void);
+extern void gru_drop_mmu_notifier(struct gru_mm_struct *gms);
+
+extern void gru_flush_tlb_range(struct gru_mm_struct *gms, unsigned long start,
+                                        unsigned long len);
+
+extern unsigned long gru_options;
+
+#endif /* __GRUTABLES_H__ */
diff --git a/drivers/misc/sgi-gru/grutlbpurge.c b/drivers/misc/sgi-gru/grutlbpurge.c
new file mode 100644
index 000000000000..bcfd5425e2e6
--- /dev/null
+++ b/drivers/misc/sgi-gru/grutlbpurge.c
@@ -0,0 +1,372 @@
+/*
+ * SN Platform GRU Driver
+ *
+ *              MMUOPS callbacks  + TLB flushing
+ *
+ * This file handles emu notifier callbacks from the core kernel. The callbacks
+ * are used to update the TLB in the GRU as a result of changes in the
+ * state of a process address space. This file also handles TLB invalidates
+ * from the GRU driver.
+ *
+ *  Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/hugetlb.h>
+#include <linux/delay.h>
+#include <linux/timex.h>
+#include <linux/delay.h>
+#include <linux/srcu.h>
+#include <asm/processor.h>
+#include "gru.h"
+#include "grutables.h"
+#include <asm/uv/uv_hub.h>
+
+#define gru_random()    get_cycles()
+
+/* ---------------------------------- TLB Invalidation functions --------
+ * get_tgh_handle
+ *
+ * Find a TGH to use for issuing a TLB invalidate. For GRUs that are on the
+ * local blade, use a fixed TGH that is a function of the blade-local cpu
+ * number. Normally, this TGH is private to the cpu & no contention occurs for
+ * the TGH. For offblade GRUs, select a random TGH in the range above the
+ * private TGHs. A spinlock is required to access this TGH & the lock must be
+ * released when the invalidate is completes. This sucks, but it is the best we
+ * can do.
+ *
+ * Note that the spinlock is IN the TGH handle so locking does not involve
+ * additional cache lines.
+ *
+ */
+static inline int get_off_blade_tgh(struct gru_state *gru)
+{
+        int n;
+
+        n = GRU_NUM_TGH - gru->gs_tgh_first_remote;
+        n = gru_random() % n;
+        n += gru->gs_tgh_first_remote;
+        return n;
+}
+
+static inline int get_on_blade_tgh(struct gru_state *gru)
+{
+        return uv_blade_processor_id() >> gru->gs_tgh_local_shift;
+}
+
+static struct gru_tlb_global_handle *get_lock_tgh_handle(struct gru_state
+                                                         *gru)
+{
+        struct gru_tlb_global_handle *tgh;
+        int n;
+
+        preempt_disable();
+        if (uv_numa_blade_id() == gru->gs_blade_id)
+                n = get_on_blade_tgh(gru);
+        else
+                n = get_off_blade_tgh(gru);
+        tgh = get_tgh_by_index(gru, n);
+        lock_tgh_handle(tgh);
+
+        return tgh;
+}
+
+static void get_unlock_tgh_handle(struct gru_tlb_global_handle *tgh)
+{
+        unlock_tgh_handle(tgh);
+        preempt_enable();
+}
+
+/*
+ * gru_flush_tlb_range
+ *
+ * General purpose TLB invalidation function. This function scans every GRU in
+ * the ENTIRE system (partition) looking for GRUs where the specified MM has
+ * been accessed by the GRU. For each GRU found, the TLB must be invalidated OR
+ * the ASID invalidated. Invalidating an ASID causes a new ASID to be assigned
+ * on the next fault. This effectively flushes the ENTIRE TLB for the MM at the
+ * cost of (possibly) a large number of future TLBmisses.
+ *
+ * The current algorithm is optimized based on the following (somewhat true)
+ * assumptions:
+ *      - GRU contexts are not loaded into a GRU unless a reference is made to
+ *        the data segment or control block (this is true, not an assumption).
+ *        If a DS/CB is referenced, the user will also issue instructions that
+ *        cause TLBmisses. It is not necessary to optimize for the case where
+ *        contexts are loaded but no instructions cause TLB misses. (I know
+ *        this will happen but I'm not optimizing for it).
+ *      - GRU instructions to invalidate TLB entries are SLOOOOWWW - normally
+ *        a few usec but in unusual cases, it could be longer. Avoid if
+ *        possible.
+ *      - intrablade process migration between cpus is not frequent but is
+ *        common.
+ *      - a GRU context is not typically migrated to a different GRU on the
+ *        blade because of intrablade migration
+ *      - interblade migration is rare. Processes migrate their GRU context to
+ *        the new blade.
+ *      - if interblade migration occurs, migration back to the original blade
+ *        is very very rare (ie., no optimization for this case)
+ *      - most GRU instruction operate on a subset of the user REGIONS. Code
+ *        & shared library regions are not likely targets of GRU instructions.
+ *
+ * To help improve the efficiency of TLB invalidation, the GMS data
+ * structure is maintained for EACH address space (MM struct). The GMS is
+ * also the structure that contains the pointer to the mmu callout
+ * functions. This structure is linked to the mm_struct for the address space
+ * using the mmu "register" function. The mmu interfaces are used to
+ * provide the callbacks for TLB invalidation. The GMS contains:
+ *
+ *      - asid[maxgrus] array. ASIDs are assigned to a GRU when a context is
+ *        loaded into the GRU.
+ *      - asidmap[maxgrus]. bitmap to make it easier to find non-zero asids in
+ *        the above array
+ *      - ctxbitmap[maxgrus]. Indicates the contexts that are currently active
+ *        in the GRU for the address space. This bitmap must be passed to the
+ *        GRU to do an invalidate.
+ *
+ * The current algorithm for invalidating TLBs is:
+ *      - scan the asidmap for GRUs where the context has been loaded, ie,
+ *        asid is non-zero.
+ *      - for each gru found:
+ *              - if the ctxtmap is non-zero, there are active contexts in the
+ *                GRU. TLB invalidate instructions must be issued to the GRU.
+ *              - if the ctxtmap is zero, no context is active. Set the ASID to
+ *                zero to force a full TLB invalidation. This is fast but will
+ *                cause a lot of TLB misses if the context is reloaded onto the
+ *                GRU
+ *
+ */
+
+void gru_flush_tlb_range(struct gru_mm_struct *gms, unsigned long start,
+                         unsigned long len)
+{
+        struct gru_state *gru;
+        struct gru_mm_tracker *asids;
+        struct gru_tlb_global_handle *tgh;
+        unsigned long num;
+        int grupagesize, pagesize, pageshift, gid, asid;
+
+        /* ZZZ TODO - handle huge pages */
+        pageshift = PAGE_SHIFT;
+        pagesize = (1UL << pageshift);
+        grupagesize = GRU_PAGESIZE(pageshift);
+        num = min(((len + pagesize - 1) >> pageshift), GRUMAXINVAL);
+
+        STAT(flush_tlb);
+        gru_dbg(grudev, "gms %p, start 0x%lx, len 0x%lx, asidmap 0x%lx\n", gms,
+                start, len, gms->ms_asidmap[0]);
+
+        spin_lock(&gms->ms_asid_lock);
+        for_each_gru_in_bitmap(gid, gms->ms_asidmap) {
+                STAT(flush_tlb_gru);
+                gru = GID_TO_GRU(gid);
+                asids = gms->ms_asids + gid;
+                asid = asids->mt_asid;
+                if (asids->mt_ctxbitmap && asid) {
+                        STAT(flush_tlb_gru_tgh);
+                        asid = GRUASID(asid, start);
+                        gru_dbg(grudev,
+        "  FLUSH gruid %d, asid 0x%x, num %ld, cbmap 0x%x\n",
+                                gid, asid, num, asids->mt_ctxbitmap);
+                        tgh = get_lock_tgh_handle(gru);
+                        tgh_invalidate(tgh, start, 0, asid, grupagesize, 0,
+                                       num - 1, asids->mt_ctxbitmap);
+                        get_unlock_tgh_handle(tgh);
+                } else {
+                        STAT(flush_tlb_gru_zero_asid);
+                        asids->mt_asid = 0;
+                        __clear_bit(gru->gs_gid, gms->ms_asidmap);
+                        gru_dbg(grudev,
+        "  CLEARASID gruid %d, asid 0x%x, cbtmap 0x%x, asidmap 0x%lx\n",
+                                gid, asid, asids->mt_ctxbitmap,
+                                gms->ms_asidmap[0]);
+                }
+        }
+        spin_unlock(&gms->ms_asid_lock);
+}
+
+/*
+ * Flush the entire TLB on a chiplet.
+ */
+void gru_flush_all_tlb(struct gru_state *gru)
+{
+        struct gru_tlb_global_handle *tgh;
+
+        gru_dbg(grudev, "gru %p, gid %d\n", gru, gru->gs_gid);
+        tgh = get_lock_tgh_handle(gru);
+        tgh_invalidate(tgh, 0, ~0, 0, 1, 1, GRUMAXINVAL - 1, 0);
+        get_unlock_tgh_handle(tgh);
+        preempt_enable();
+}
+
+/*
+ * MMUOPS notifier callout functions
+ */
+static void gru_invalidate_range_start(struct mmu_notifier *mn,
+                                       struct mm_struct *mm,
+                                       unsigned long start, unsigned long end)
+{
+        struct gru_mm_struct *gms = container_of(mn, struct gru_mm_struct,
+                                                 ms_notifier);
+
+        STAT(mmu_invalidate_range);
+        atomic_inc(&gms->ms_range_active);
+        gru_dbg(grudev, "gms %p, start 0x%lx, end 0x%lx, act %d\n", gms,
+                start, end, atomic_read(&gms->ms_range_active));
+        gru_flush_tlb_range(gms, start, end - start);
+}
+
+static void gru_invalidate_range_end(struct mmu_notifier *mn,
+                                     struct mm_struct *mm, unsigned long start,
+                                     unsigned long end)
+{
+        struct gru_mm_struct *gms = container_of(mn, struct gru_mm_struct,
+                                                 ms_notifier);
+
+        /* ..._and_test() provides needed barrier */
+        (void)atomic_dec_and_test(&gms->ms_range_active);
+
+        wake_up_all(&gms->ms_wait_queue);
+        gru_dbg(grudev, "gms %p, start 0x%lx, end 0x%lx\n", gms, start, end);
+}
+
+static void gru_invalidate_page(struct mmu_notifier *mn, struct mm_struct *mm,
+                                unsigned long address)
+{
+        struct gru_mm_struct *gms = container_of(mn, struct gru_mm_struct,
+                                                 ms_notifier);
+
+        STAT(mmu_invalidate_page);
+        gru_flush_tlb_range(gms, address, PAGE_SIZE);
+        gru_dbg(grudev, "gms %p, address 0x%lx\n", gms, address);
+}
+
+static void gru_release(struct mmu_notifier *mn, struct mm_struct *mm)
+{
+        struct gru_mm_struct *gms = container_of(mn, struct gru_mm_struct,
+                                                 ms_notifier);
+
+        gms->ms_released = 1;
+        gru_dbg(grudev, "gms %p\n", gms);
+}
+
+
+static const struct mmu_notifier_ops gru_mmuops = {
+        .invalidate_page        = gru_invalidate_page,
+        .invalidate_range_start = gru_invalidate_range_start,
+        .invalidate_range_end   = gru_invalidate_range_end,
+        .release                = gru_release,
+};
+
+/* Move this to the basic mmu_notifier file. But for now... */
+static struct mmu_notifier *mmu_find_ops(struct mm_struct *mm,
+                        const struct mmu_notifier_ops *ops)
+{
+        struct mmu_notifier *mn, *gru_mn = NULL;
+        struct hlist_node *n;
+
+        if (mm->mmu_notifier_mm) {
+                rcu_read_lock();
+                hlist_for_each_entry_rcu(mn, n, &mm->mmu_notifier_mm->list,
+                                         hlist)
+                    if (mn->ops == ops) {
+                        gru_mn = mn;
+                        break;
+                }
+                rcu_read_unlock();
+        }
+        return gru_mn;
+}
+
+struct gru_mm_struct *gru_register_mmu_notifier(void)
+{
+        struct gru_mm_struct *gms;
+        struct mmu_notifier *mn;
+
+        mn = mmu_find_ops(current->mm, &gru_mmuops);
+        if (mn) {
+                gms = container_of(mn, struct gru_mm_struct, ms_notifier);
+                atomic_inc(&gms->ms_refcnt);
+        } else {
+                gms = kzalloc(sizeof(*gms), GFP_KERNEL);
+                if (gms) {
+                        spin_lock_init(&gms->ms_asid_lock);
+                        gms->ms_notifier.ops = &gru_mmuops;
+                        atomic_set(&gms->ms_refcnt, 1);
+                        init_waitqueue_head(&gms->ms_wait_queue);
+                        __mmu_notifier_register(&gms->ms_notifier, current->mm);
+                }
+        }
+        gru_dbg(grudev, "gms %p, refcnt %d\n", gms,
+                atomic_read(&gms->ms_refcnt));
+        return gms;
+}
+
+void gru_drop_mmu_notifier(struct gru_mm_struct *gms)
+{
+        gru_dbg(grudev, "gms %p, refcnt %d, released %d\n", gms,
+                atomic_read(&gms->ms_refcnt), gms->ms_released);
+        if (atomic_dec_return(&gms->ms_refcnt) == 0) {
+                if (!gms->ms_released)
+                        mmu_notifier_unregister(&gms->ms_notifier, current->mm);
+                kfree(gms);
+        }
+}
+
+/*
+ * Setup TGH parameters. There are:
+ *      - 24 TGH handles per GRU chiplet
+ *      - a portion (MAX_LOCAL_TGH) of the handles are reserved for
+ *        use by blade-local cpus
+ *      - the rest are used by off-blade cpus. This usage is
+ *        less frequent than blade-local usage.
+ *
+ * For now, use 16 handles for local flushes, 8 for remote flushes. If the blade
+ * has less tan or equal to 16 cpus, each cpu has a unique handle that it can
+ * use.
+ */
+#define MAX_LOCAL_TGH   16
+
+void gru_tgh_flush_init(struct gru_state *gru)
+{
+        int cpus, shift = 0, n;
+
+        cpus = uv_blade_nr_possible_cpus(gru->gs_blade_id);
+
+        /* n = cpus rounded up to next power of 2 */
+        if (cpus) {
+                n = 1 << fls(cpus - 1);
+
+                /*
+                 * shift count for converting local cpu# to TGH index
+                 *      0 if cpus <= MAX_LOCAL_TGH,
+                 *      1 if cpus <= 2*MAX_LOCAL_TGH,
+                 *      etc
+                 */
+                shift = max(0, fls(n - 1) - fls(MAX_LOCAL_TGH - 1));
+        }
+        gru->gs_tgh_local_shift = shift;
+
+        /* first starting TGH index to use for remote purges */
+        gru->gs_tgh_first_remote = (cpus + (1 << shift) - 1) >> shift;
+
+}
diff --git a/drivers/misc/sgi-xp/Makefile b/drivers/misc/sgi-xp/Makefile
index b6e40a7958ce..35ce28578075 100644
--- a/drivers/misc/sgi-xp/Makefile
+++ b/drivers/misc/sgi-xp/Makefile
@@ -3,9 +3,17 @@
 #
 
 obj-$(CONFIG_SGI_XP)            += xp.o
-xp-y                            := xp_main.o xp_nofault.o
+xp-y                            := xp_main.o
+xp-$(CONFIG_IA64_SGI_SN2)       += xp_sn2.o xp_nofault.o
+xp-$(CONFIG_IA64_GENERIC)       += xp_sn2.o xp_nofault.o xp_uv.o
+xp-$(CONFIG_IA64_SGI_UV)        += xp_uv.o
+xp-$(CONFIG_X86_64)             += xp_uv.o
 
 obj-$(CONFIG_SGI_XP)            += xpc.o
 xpc-y                           := xpc_main.o xpc_channel.o xpc_partition.o
+xpc-$(CONFIG_IA64_SGI_SN2)      += xpc_sn2.o
+xpc-$(CONFIG_IA64_GENERIC)      += xpc_sn2.o xpc_uv.o
+xpc-$(CONFIG_IA64_SGI_UV)       += xpc_uv.o
+xpc-$(CONFIG_X86_64)            += xpc_uv.o
 
 obj-$(CONFIG_SGI_XP)            += xpnet.o
diff --git a/drivers/misc/sgi-xp/xp.h b/drivers/misc/sgi-xp/xp.h
index 03a87a307e32..859a5281c61b 100644
--- a/drivers/misc/sgi-xp/xp.h
+++ b/drivers/misc/sgi-xp/xp.h
@@ -13,11 +13,34 @@
 #ifndef _DRIVERS_MISC_SGIXP_XP_H
 #define _DRIVERS_MISC_SGIXP_XP_H
 
-#include <linux/cache.h>
-#include <linux/hardirq.h>
 #include <linux/mutex.h>
-#include <asm/sn/types.h>
-#include <asm/sn/bte.h>
+
+#ifdef CONFIG_IA64
+#include <asm/system.h>
+#include <asm/sn/arch.h>        /* defines is_shub1() and is_shub2() */
+#define is_shub()       ia64_platform_is("sn2")
+#define is_uv()         ia64_platform_is("uv")
+#endif
+#ifdef CONFIG_X86_64
+#include <asm/genapic.h>
+#define is_uv()         is_uv_system()
+#endif
+
+#ifndef is_shub1
+#define is_shub1()      0
+#endif
+
+#ifndef is_shub2
+#define is_shub2()      0
+#endif
+
+#ifndef is_shub
+#define is_shub()       0
+#endif
+
+#ifndef is_uv
+#define is_uv()         0
+#endif
 
 #ifdef USE_DBUG_ON
 #define DBUG_ON(condition)      BUG_ON(condition)
@@ -26,133 +49,56 @@
 #endif
 
 /*
- * Define the maximum number of logically defined partitions the system
- * can support. It is constrained by the maximum number of hardware
- * partitionable regions. The term 'region' in this context refers to the
- * minimum number of nodes that can comprise an access protection grouping.
- * The access protection is in regards to memory, IPI and IOI.
+ * Define the maximum number of partitions the system can possibly support.
+ * It is based on the maximum number of hardware partitionable regions. The
+ * term 'region' in this context refers to the minimum number of nodes that
+ * can comprise an access protection grouping. The access protection is in
+ * regards to memory, IPI and IOI.
  *
  * The maximum number of hardware partitionable regions is equal to the
  * maximum number of nodes in the entire system divided by the minimum number
  * of nodes that comprise an access protection grouping.
  */
-#define XP_MAX_PARTITIONS       64
-
-/*
- * Define the number of u64s required to represent all the C-brick nasids
- * as a bitmap.  The cross-partition kernel modules deal only with
- * C-brick nasids, thus the need for bitmaps which don't account for
- * odd-numbered (non C-brick) nasids.
- */
-#define XP_MAX_PHYSNODE_ID      (MAX_NUMALINK_NODES / 2)
-#define XP_NASID_MASK_BYTES     ((XP_MAX_PHYSNODE_ID + 7) / 8)
-#define XP_NASID_MASK_WORDS     ((XP_MAX_PHYSNODE_ID + 63) / 64)
-
-/*
- * Wrapper for bte_copy() that should it return a failure status will retry
- * the bte_copy() once in the hope that the failure was due to a temporary
- * aberration (i.e., the link going down temporarily).
- *
- *      src - physical address of the source of the transfer.
- *      vdst - virtual address of the destination of the transfer.
- *      len - number of bytes to transfer from source to destination.
- *      mode - see bte_copy() for definition.
- *      notification - see bte_copy() for definition.
- *
- * Note: xp_bte_copy() should never be called while holding a spinlock.
- */
-static inline bte_result_t
-xp_bte_copy(u64 src, u64 vdst, u64 len, u64 mode, void *notification)
-{
-        bte_result_t ret;
-        u64 pdst = ia64_tpa(vdst);
-
-        /*
-         * Ensure that the physically mapped memory is contiguous.
-         *
-         * We do this by ensuring that the memory is from region 7 only.
-         * If the need should arise to use memory from one of the other
-         * regions, then modify the BUG_ON() statement to ensure that the
-         * memory from that region is always physically contiguous.
-         */
-        BUG_ON(REGION_NUMBER(vdst) != RGN_KERNEL);
-
-        ret = bte_copy(src, pdst, len, mode, notification);
-        if ((ret != BTE_SUCCESS) && BTE_ERROR_RETRY(ret)) {
-                if (!in_interrupt())
-                        cond_resched();
-
-                ret = bte_copy(src, pdst, len, mode, notification);
-        }
-
-        return ret;
-}
+#define XP_MAX_NPARTITIONS_SN2  64
+#define XP_MAX_NPARTITIONS_UV   256
 
 /*
  * XPC establishes channel connections between the local partition and any
  * other partition that is currently up. Over these channels, kernel-level
  * `users' can communicate with their counterparts on the other partitions.
  *
- * The maxinum number of channels is limited to eight. For performance reasons,
- * the internal cross partition structures require sixteen bytes per channel,
- * and eight allows all of this interface-shared info to fit in one cache line.
- *
- * XPC_NCHANNELS reflects the total number of channels currently defined.
  * If the need for additional channels arises, one can simply increase
- * XPC_NCHANNELS accordingly. If the day should come where that number
- * exceeds the MAXIMUM number of channels allowed (eight), then one will need
- * to make changes to the XPC code to allow for this.
+ * XPC_MAX_NCHANNELS accordingly. If the day should come where that number
+ * exceeds the absolute MAXIMUM number of channels possible (eight), then one
+ * will need to make changes to the XPC code to accommodate for this.
+ *
+ * The absolute maximum number of channels possible is limited to eight for
+ * performance reasons on sn2 hardware. The internal cross partition structures
+ * require sixteen bytes per channel, and eight allows all of this
+ * interface-shared info to fit in one 128-byte cacheline.
  */
 #define XPC_MEM_CHANNEL         0       /* memory channel number */
 #define XPC_NET_CHANNEL         1       /* network channel number */
 
-#define XPC_NCHANNELS           2       /* #of defined channels */
-#define XPC_MAX_NCHANNELS       8       /* max #of channels allowed */
+#define XPC_MAX_NCHANNELS       2       /* max #of channels allowed */
 
-#if XPC_NCHANNELS > XPC_MAX_NCHANNELS
-#error  XPC_NCHANNELS exceeds MAXIMUM allowed.
+#if XPC_MAX_NCHANNELS > 8
+#error  XPC_MAX_NCHANNELS exceeds absolute MAXIMUM possible.
 #endif
 
 /*
- * The format of an XPC message is as follows:
- *
- *      +-------+--------------------------------+
- *      | flags |////////////////////////////////|
- *      +-------+--------------------------------+
- *      |             message #                  |
- *      +----------------------------------------+
- *      |     payload (user-defined message)     |
- *      |                                        |
- *                      :
- *      |                                        |
- *      +----------------------------------------+
- *
- * The size of the payload is defined by the user via xpc_connect(). A user-
- * defined message resides in the payload area.
- *
- * The user should have no dealings with the message header, but only the
- * message's payload. When a message entry is allocated (via xpc_allocate())
- * a pointer to the payload area is returned and not the actual beginning of
- * the XPC message. The user then constructs a message in the payload area
- * and passes that pointer as an argument on xpc_send() or xpc_send_notify().
- *
- * The size of a message entry (within a message queue) must be a cacheline
- * sized multiple in order to facilitate the BTE transfer of messages from one
- * message queue to another. A macro, XPC_MSG_SIZE(), is provided for the user
+ * Define macro, XPC_MSG_SIZE(), is provided for the user
  * that wants to fit as many msg entries as possible in a given memory size
  * (e.g. a memory page).
  */
-struct xpc_msg {
-        u8 flags;               /* FOR XPC INTERNAL USE ONLY */
-        u8 reserved[7];         /* FOR XPC INTERNAL USE ONLY */
-        s64 number;             /* FOR XPC INTERNAL USE ONLY */
-
-        u64 payload;            /* user defined portion of message */
-};
+#define XPC_MSG_MAX_SIZE        128
+#define XPC_MSG_HDR_MAX_SIZE    16
+#define XPC_MSG_PAYLOAD_MAX_SIZE (XPC_MSG_MAX_SIZE - XPC_MSG_HDR_MAX_SIZE)
 
-#define XPC_MSG_PAYLOAD_OFFSET  (u64) (&((struct xpc_msg *)0)->payload)
 #define XPC_MSG_SIZE(_payload_size) \
-                L1_CACHE_ALIGN(XPC_MSG_PAYLOAD_OFFSET + (_payload_size))
+                                ALIGN(XPC_MSG_HDR_MAX_SIZE + (_payload_size), \
+                                      is_uv() ? 64 : 128)
+
 
 /*
  * Define the return values and values passed to user's callout functions.
@@ -233,8 +179,20 @@ enum xp_retval {
         xpDisconnected,         /* 51: channel disconnected (closed) */
 
         xpBteCopyError,         /* 52: bte_copy() returned error */
+        xpSalError,             /* 53: sn SAL error */
+        xpRsvdPageNotSet,       /* 54: the reserved page is not set up */
+        xpPayloadTooBig,        /* 55: payload too large for message slot */
+
+        xpUnsupported,          /* 56: unsupported functionality or resource */
+        xpNeedMoreInfo,         /* 57: more info is needed by SAL */
 
-        xpUnknownReason         /* 53: unknown reason - must be last in enum */
+        xpGruCopyError,         /* 58: gru_copy_gru() returned error */
+        xpGruSendMqError,       /* 59: gru send message queue related error */
+
+        xpBadChannelNumber,     /* 60: invalid channel number */
+        xpBadMsgType,           /* 60: invalid message type */
+
+        xpUnknownReason         /* 61: unknown reason - must be last in enum */
 };
 
 /*
@@ -285,6 +243,9 @@ typedef void (*xpc_channel_func) (enum xp_retval reason, short partid,
  * calling xpc_received().
  *
  * All other reason codes indicate failure.
+ *
+ * NOTE: The user defined function must be callable by an interrupt handler
+ *       and thus cannot block.
  */
 typedef void (*xpc_notify_func) (enum xp_retval reason, short partid,
                                  int ch_number, void *key);
@@ -308,23 +269,22 @@ struct xpc_registration {
         xpc_channel_func func;  /* function to call */
         void *key;              /* pointer to user's key */
         u16 nentries;           /* #of msg entries in local msg queue */
-        u16 msg_size;           /* message queue's message size */
+        u16 entry_size;         /* message queue's message entry size */
         u32 assigned_limit;     /* limit on #of assigned kthreads */
         u32 idle_limit;         /* limit on #of idle kthreads */
 } ____cacheline_aligned;
 
 #define XPC_CHANNEL_REGISTERED(_c)      (xpc_registrations[_c].func != NULL)
 
-/* the following are valid xpc_allocate() flags */
+/* the following are valid xpc_send() or xpc_send_notify() flags */
 #define XPC_WAIT        0       /* wait flag */
 #define XPC_NOWAIT      1       /* no wait flag */
 
 struct xpc_interface {
         void (*connect) (int);
         void (*disconnect) (int);
-        enum xp_retval (*allocate) (short, int, u32, void **);
-        enum xp_retval (*send) (short, int, void *);
-        enum xp_retval (*send_notify) (short, int, void *,
+        enum xp_retval (*send) (short, int, u32, void *, u16);
+        enum xp_retval (*send_notify) (short, int, u32, void *, u16,
                                         xpc_notify_func, void *);
         void (*received) (short, int, void *);
         enum xp_retval (*partid_to_nasids) (short, void *);
@@ -334,10 +294,9 @@ extern struct xpc_interface xpc_interface;
 
 extern void xpc_set_interface(void (*)(int),
                               void (*)(int),
-                              enum xp_retval (*)(short, int, u32, void **),
-                              enum xp_retval (*)(short, int, void *),
-                              enum xp_retval (*)(short, int, void *,
-                                                  xpc_notify_func, void *),
+                              enum xp_retval (*)(short, int, u32, void *, u16),
+                              enum xp_retval (*)(short, int, u32, void *, u16,
+                                                 xpc_notify_func, void *),
                               void (*)(short, int, void *),
                               enum xp_retval (*)(short, void *));
 extern void xpc_clear_interface(void);
@@ -347,22 +306,19 @@ extern enum xp_retval xpc_connect(int, xpc_channel_func, void *, u16,
 extern void xpc_disconnect(int);
 
 static inline enum xp_retval
-xpc_allocate(short partid, int ch_number, u32 flags, void **payload)
-{
-        return xpc_interface.allocate(partid, ch_number, flags, payload);
-}
-
-static inline enum xp_retval
-xpc_send(short partid, int ch_number, void *payload)
+xpc_send(short partid, int ch_number, u32 flags, void *payload,
+         u16 payload_size)
 {
-        return xpc_interface.send(partid, ch_number, payload);
+        return xpc_interface.send(partid, ch_number, flags, payload,
+                                  payload_size);
 }
 
 static inline enum xp_retval
-xpc_send_notify(short partid, int ch_number, void *payload,
-                xpc_notify_func func, void *key)
+xpc_send_notify(short partid, int ch_number, u32 flags, void *payload,
+                u16 payload_size, xpc_notify_func func, void *key)
 {
-        return xpc_interface.send_notify(partid, ch_number, payload, func, key);
+        return xpc_interface.send_notify(partid, ch_number, flags, payload,
+                                         payload_size, func, key);
 }
 
 static inline void
@@ -377,8 +333,23 @@ xpc_partid_to_nasids(short partid, void *nasids)
         return xpc_interface.partid_to_nasids(partid, nasids);
 }
 
+extern short xp_max_npartitions;
+extern short xp_partition_id;
+extern u8 xp_region_size;
+
+extern unsigned long (*xp_pa) (void *);
+extern enum xp_retval (*xp_remote_memcpy) (unsigned long, const unsigned long,
+                       size_t);
+extern int (*xp_cpu_to_nasid) (int);
+
 extern u64 xp_nofault_PIOR_target;
 extern int xp_nofault_PIOR(void *);
 extern int xp_error_PIOR(void);
 
+extern struct device *xp;
+extern enum xp_retval xp_init_sn2(void);
+extern enum xp_retval xp_init_uv(void);
+extern void xp_exit_sn2(void);
+extern void xp_exit_uv(void);
+
 #endif /* _DRIVERS_MISC_SGIXP_XP_H */
diff --git a/drivers/misc/sgi-xp/xp_main.c b/drivers/misc/sgi-xp/xp_main.c
index 196480b691a1..66a1d19e08ad 100644
--- a/drivers/misc/sgi-xp/xp_main.c
+++ b/drivers/misc/sgi-xp/xp_main.c
@@ -14,29 +14,48 @@
  *
  */
 
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
 #include <linux/module.h>
-#include <linux/mutex.h>
-#include <asm/sn/intr.h>
-#include <asm/sn/sn_sal.h>
+#include <linux/device.h>
 #include "xp.h"
 
-/*
- * The export of xp_nofault_PIOR needs to happen here since it is defined
- * in drivers/misc/sgi-xp/xp_nofault.S. The target of the nofault read is
- * defined here.
- */
-EXPORT_SYMBOL_GPL(xp_nofault_PIOR);
+/* define the XP debug device structures to be used with dev_dbg() et al */
+
+struct device_driver xp_dbg_name = {
+        .name = "xp"
+};
+
+struct device xp_dbg_subname = {
+        .bus_id = {0},          /* set to "" */
+        .driver = &xp_dbg_name
+};
+
+struct device *xp = &xp_dbg_subname;
+
+/* max #of partitions possible */
+short xp_max_npartitions;
+EXPORT_SYMBOL_GPL(xp_max_npartitions);
+
+short xp_partition_id;
+EXPORT_SYMBOL_GPL(xp_partition_id);
+
+u8 xp_region_size;
+EXPORT_SYMBOL_GPL(xp_region_size);
+
+unsigned long (*xp_pa) (void *addr);
+EXPORT_SYMBOL_GPL(xp_pa);
+
+enum xp_retval (*xp_remote_memcpy) (unsigned long dst_gpa,
+                                    const unsigned long src_gpa, size_t len);
+EXPORT_SYMBOL_GPL(xp_remote_memcpy);
 
-u64 xp_nofault_PIOR_target;
-EXPORT_SYMBOL_GPL(xp_nofault_PIOR_target);
+int (*xp_cpu_to_nasid) (int cpuid);
+EXPORT_SYMBOL_GPL(xp_cpu_to_nasid);
 
 /*
  * xpc_registrations[] keeps track of xpc_connect()'s done by the kernel-level
  * users of XPC.
  */
-struct xpc_registration xpc_registrations[XPC_NCHANNELS];
+struct xpc_registration xpc_registrations[XPC_MAX_NCHANNELS];
 EXPORT_SYMBOL_GPL(xpc_registrations);
 
 /*
@@ -51,10 +70,9 @@ xpc_notloaded(void)
 struct xpc_interface xpc_interface = {
         (void (*)(int))xpc_notloaded,
         (void (*)(int))xpc_notloaded,
-        (enum xp_retval(*)(short, int, u32, void **))xpc_notloaded,
-        (enum xp_retval(*)(short, int, void *))xpc_notloaded,
-        (enum xp_retval(*)(short, int, void *, xpc_notify_func, void *))
-            xpc_notloaded,
+        (enum xp_retval(*)(short, int, u32, void *, u16))xpc_notloaded,
+        (enum xp_retval(*)(short, int, u32, void *, u16, xpc_notify_func,
+                           void *))xpc_notloaded,
         (void (*)(short, int, void *))xpc_notloaded,
         (enum xp_retval(*)(short, void *))xpc_notloaded
 };
@@ -66,16 +84,14 @@ EXPORT_SYMBOL_GPL(xpc_interface);
 void
 xpc_set_interface(void (*connect) (int),
                   void (*disconnect) (int),
-                  enum xp_retval (*allocate) (short, int, u32, void **),
-                  enum xp_retval (*send) (short, int, void *),
-                  enum xp_retval (*send_notify) (short, int, void *,
+                  enum xp_retval (*send) (short, int, u32, void *, u16),
+                  enum xp_retval (*send_notify) (short, int, u32, void *, u16,
                                                   xpc_notify_func, void *),
                   void (*received) (short, int, void *),
                   enum xp_retval (*partid_to_nasids) (short, void *))
 {
         xpc_interface.connect = connect;
         xpc_interface.disconnect = disconnect;
-        xpc_interface.allocate = allocate;
         xpc_interface.send = send;
         xpc_interface.send_notify = send_notify;
         xpc_interface.received = received;
@@ -91,13 +107,11 @@ xpc_clear_interface(void)
 {
         xpc_interface.connect = (void (*)(int))xpc_notloaded;
         xpc_interface.disconnect = (void (*)(int))xpc_notloaded;
-        xpc_interface.allocate = (enum xp_retval(*)(short, int, u32,
-                                                     void **))xpc_notloaded;
-        xpc_interface.send = (enum xp_retval(*)(short, int, void *))
+        xpc_interface.send = (enum xp_retval(*)(short, int, u32, void *, u16))
             xpc_notloaded;
-        xpc_interface.send_notify = (enum xp_retval(*)(short, int, void *,
-                                                        xpc_notify_func,
-                                                        void *))xpc_notloaded;
+        xpc_interface.send_notify = (enum xp_retval(*)(short, int, u32, void *,
+                                                       u16, xpc_notify_func,
+                                                       void *))xpc_notloaded;
         xpc_interface.received = (void (*)(short, int, void *))
             xpc_notloaded;
         xpc_interface.partid_to_nasids = (enum xp_retval(*)(short, void *))
@@ -135,11 +149,14 @@ xpc_connect(int ch_number, xpc_channel_func func, void *key, u16 payload_size,
 {
         struct xpc_registration *registration;
 
-        DBUG_ON(ch_number < 0 || ch_number >= XPC_NCHANNELS);
+        DBUG_ON(ch_number < 0 || ch_number >= XPC_MAX_NCHANNELS);
         DBUG_ON(payload_size == 0 || nentries == 0);
         DBUG_ON(func == NULL);
         DBUG_ON(assigned_limit == 0 || idle_limit > assigned_limit);
 
+        if (XPC_MSG_SIZE(payload_size) > XPC_MSG_MAX_SIZE)
+                return xpPayloadTooBig;
+
         registration = &xpc_registrations[ch_number];
 
         if (mutex_lock_interruptible(&registration->mutex) != 0)
@@ -152,7 +169,7 @@ xpc_connect(int ch_number, xpc_channel_func func, void *key, u16 payload_size,
         }
 
         /* register the channel for connection */
-        registration->msg_size = XPC_MSG_SIZE(payload_size);
+        registration->entry_size = XPC_MSG_SIZE(payload_size);
         registration->nentries = nentries;
         registration->assigned_limit = assigned_limit;
         registration->idle_limit = idle_limit;
@@ -185,7 +202,7 @@ xpc_disconnect(int ch_number)
 {
         struct xpc_registration *registration;
 
-        DBUG_ON(ch_number < 0 || ch_number >= XPC_NCHANNELS);
+        DBUG_ON(ch_number < 0 || ch_number >= XPC_MAX_NCHANNELS);
 
         registration = &xpc_registrations[ch_number];
 
@@ -206,7 +223,7 @@ xpc_disconnect(int ch_number)
         registration->func = NULL;
         registration->key = NULL;
         registration->nentries = 0;
-        registration->msg_size = 0;
+        registration->entry_size = 0;
         registration->assigned_limit = 0;
         registration->idle_limit = 0;
 
@@ -221,39 +238,21 @@ EXPORT_SYMBOL_GPL(xpc_disconnect);
 int __init
 xp_init(void)
 {
-        int ret, ch_number;
-        u64 func_addr = *(u64 *)xp_nofault_PIOR;
-        u64 err_func_addr = *(u64 *)xp_error_PIOR;
-
-        if (!ia64_platform_is("sn2"))
-                return -ENODEV;
+        enum xp_retval ret;
+        int ch_number;
 
-        /*
-         * Register a nofault code region which performs a cross-partition
-         * PIO read. If the PIO read times out, the MCA handler will consume
-         * the error and return to a kernel-provided instruction to indicate
-         * an error. This PIO read exists because it is guaranteed to timeout
-         * if the destination is down (AMO operations do not timeout on at
-         * least some CPUs on Shubs <= v1.2, which unfortunately we have to
-         * work around).
-         */
-        ret = sn_register_nofault_code(func_addr, err_func_addr, err_func_addr,
-                                       1, 1);
-        if (ret != 0) {
-                printk(KERN_ERR "XP: can't register nofault code, error=%d\n",
-                       ret);
-        }
-        /*
-         * Setup the nofault PIO read target. (There is no special reason why
-         * SH_IPI_ACCESS was selected.)
-         */
-        if (is_shub2())
-                xp_nofault_PIOR_target = SH2_IPI_ACCESS0;
+        if (is_shub())
+                ret = xp_init_sn2();
+        else if (is_uv())
+                ret = xp_init_uv();
         else
-                xp_nofault_PIOR_target = SH1_IPI_ACCESS;
+                ret = xpUnsupported;
+
+        if (ret != xpSuccess)
+                return -ENODEV;
 
         /* initialize the connection registration mutex */
-        for (ch_number = 0; ch_number < XPC_NCHANNELS; ch_number++)
+        for (ch_number = 0; ch_number < XPC_MAX_NCHANNELS; ch_number++)
                 mutex_init(&xpc_registrations[ch_number].mutex);
 
         return 0;
@@ -264,12 +263,10 @@ module_init(xp_init);
 void __exit
 xp_exit(void)
 {
-        u64 func_addr = *(u64 *)xp_nofault_PIOR;
-        u64 err_func_addr = *(u64 *)xp_error_PIOR;
-
-        /* unregister the PIO read nofault code region */
-        (void)sn_register_nofault_code(func_addr, err_func_addr,
-                                       err_func_addr, 1, 0);
+        if (is_shub())
+                xp_exit_sn2();
+        else if (is_uv())
+                xp_exit_uv();
 }
 
 module_exit(xp_exit);
diff --git a/drivers/misc/sgi-xp/xp_sn2.c b/drivers/misc/sgi-xp/xp_sn2.c
new file mode 100644
index 000000000000..1440134caf31
--- /dev/null
+++ b/drivers/misc/sgi-xp/xp_sn2.c
@@ -0,0 +1,146 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ */
+
+/*
+ * Cross Partition (XP) sn2-based functions.
+ *
+ *      Architecture specific implementation of common functions.
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <asm/sn/bte.h>
+#include <asm/sn/sn_sal.h>
+#include "xp.h"
+
+/*
+ * The export of xp_nofault_PIOR needs to happen here since it is defined
+ * in drivers/misc/sgi-xp/xp_nofault.S. The target of the nofault read is
+ * defined here.
+ */
+EXPORT_SYMBOL_GPL(xp_nofault_PIOR);
+
+u64 xp_nofault_PIOR_target;
+EXPORT_SYMBOL_GPL(xp_nofault_PIOR_target);
+
+/*
+ * Register a nofault code region which performs a cross-partition PIO read.
+ * If the PIO read times out, the MCA handler will consume the error and
+ * return to a kernel-provided instruction to indicate an error. This PIO read
+ * exists because it is guaranteed to timeout if the destination is down
+ * (amo operations do not timeout on at least some CPUs on Shubs <= v1.2,
+ * which unfortunately we have to work around).
+ */
+static enum xp_retval
+xp_register_nofault_code_sn2(void)
+{
+        int ret;
+        u64 func_addr;
+        u64 err_func_addr;
+
+        func_addr = *(u64 *)xp_nofault_PIOR;
+        err_func_addr = *(u64 *)xp_error_PIOR;
+        ret = sn_register_nofault_code(func_addr, err_func_addr, err_func_addr,
+                                       1, 1);
+        if (ret != 0) {
+                dev_err(xp, "can't register nofault code, error=%d\n", ret);
+                return xpSalError;
+        }
+        /*
+         * Setup the nofault PIO read target. (There is no special reason why
+         * SH_IPI_ACCESS was selected.)
+         */
+        if (is_shub1())
+                xp_nofault_PIOR_target = SH1_IPI_ACCESS;
+        else if (is_shub2())
+                xp_nofault_PIOR_target = SH2_IPI_ACCESS0;
+
+        return xpSuccess;
+}
+
+static void
+xp_unregister_nofault_code_sn2(void)
+{
+        u64 func_addr = *(u64 *)xp_nofault_PIOR;
+        u64 err_func_addr = *(u64 *)xp_error_PIOR;
+
+        /* unregister the PIO read nofault code region */
+        (void)sn_register_nofault_code(func_addr, err_func_addr,
+                                       err_func_addr, 1, 0);
+}
+
+/*
+ * Convert a virtual memory address to a physical memory address.
+ */
+static unsigned long
+xp_pa_sn2(void *addr)
+{
+        return __pa(addr);
+}
+
+/*
+ * Wrapper for bte_copy().
+ *
+ *      dst_pa - physical address of the destination of the transfer.
+ *      src_pa - physical address of the source of the transfer.
+ *      len - number of bytes to transfer from source to destination.
+ *
+ * Note: xp_remote_memcpy_sn2() should never be called while holding a spinlock.
+ */
+static enum xp_retval
+xp_remote_memcpy_sn2(unsigned long dst_pa, const unsigned long src_pa,
+                     size_t len)
+{
+        bte_result_t ret;
+
+        ret = bte_copy(src_pa, dst_pa, len, (BTE_NOTIFY | BTE_WACQUIRE), NULL);
+        if (ret == BTE_SUCCESS)
+                return xpSuccess;
+
+        if (is_shub2()) {
+                dev_err(xp, "bte_copy() on shub2 failed, error=0x%x dst_pa="
+                        "0x%016lx src_pa=0x%016lx len=%ld\\n", ret, dst_pa,
+                        src_pa, len);
+        } else {
+                dev_err(xp, "bte_copy() failed, error=%d dst_pa=0x%016lx "
+                        "src_pa=0x%016lx len=%ld\\n", ret, dst_pa, src_pa, len);
+        }
+
+        return xpBteCopyError;
+}
+
+static int
+xp_cpu_to_nasid_sn2(int cpuid)
+{
+        return cpuid_to_nasid(cpuid);
+}
+
+enum xp_retval
+xp_init_sn2(void)
+{
+        BUG_ON(!is_shub());
+
+        xp_max_npartitions = XP_MAX_NPARTITIONS_SN2;
+        xp_partition_id = sn_partition_id;
+        xp_region_size = sn_region_size;
+
+        xp_pa = xp_pa_sn2;
+        xp_remote_memcpy = xp_remote_memcpy_sn2;
+        xp_cpu_to_nasid = xp_cpu_to_nasid_sn2;
+
+        return xp_register_nofault_code_sn2();
+}
+
+void
+xp_exit_sn2(void)
+{
+        BUG_ON(!is_shub());
+
+        xp_unregister_nofault_code_sn2();
+}
+
diff --git a/drivers/misc/sgi-xp/xp_uv.c b/drivers/misc/sgi-xp/xp_uv.c
new file mode 100644
index 000000000000..d9f7ce2510bc
--- /dev/null
+++ b/drivers/misc/sgi-xp/xp_uv.c
@@ -0,0 +1,72 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ */
+
+/*
+ * Cross Partition (XP) uv-based functions.
+ *
+ *      Architecture specific implementation of common functions.
+ *
+ */
+
+#include <linux/device.h>
+#include <asm/uv/uv_hub.h>
+#include "../sgi-gru/grukservices.h"
+#include "xp.h"
+
+/*
+ * Convert a virtual memory address to a physical memory address.
+ */
+static unsigned long
+xp_pa_uv(void *addr)
+{
+        return uv_gpa(addr);
+}
+
+static enum xp_retval
+xp_remote_memcpy_uv(unsigned long dst_gpa, const unsigned long src_gpa,
+                    size_t len)
+{
+        int ret;
+
+        ret = gru_copy_gpa(dst_gpa, src_gpa, len);
+        if (ret == 0)
+                return xpSuccess;
+
+        dev_err(xp, "gru_copy_gpa() failed, dst_gpa=0x%016lx src_gpa=0x%016lx "
+                "len=%ld\n", dst_gpa, src_gpa, len);
+        return xpGruCopyError;
+}
+
+static int
+xp_cpu_to_nasid_uv(int cpuid)
+{
+        /* ??? Is this same as sn2 nasid in mach/part bitmaps set up by SAL? */
+        return UV_PNODE_TO_NASID(uv_cpu_to_pnode(cpuid));
+}
+
+enum xp_retval
+xp_init_uv(void)
+{
+        BUG_ON(!is_uv());
+
+        xp_max_npartitions = XP_MAX_NPARTITIONS_UV;
+        xp_partition_id = 0;    /* !!! not correct value */
+        xp_region_size = 0;     /* !!! not correct value */
+
+        xp_pa = xp_pa_uv;
+        xp_remote_memcpy = xp_remote_memcpy_uv;
+        xp_cpu_to_nasid = xp_cpu_to_nasid_uv;
+
+        return xpSuccess;
+}
+
+void
+xp_exit_uv(void)
+{
+        BUG_ON(!is_uv());
+}
diff --git a/drivers/misc/sgi-xp/xpc.h b/drivers/misc/sgi-xp/xpc.h
index 11ac267ed68f..619208d61862 100644
--- a/drivers/misc/sgi-xp/xpc.h
+++ b/drivers/misc/sgi-xp/xpc.h
@@ -13,18 +13,10 @@
 #ifndef _DRIVERS_MISC_SGIXP_XPC_H
 #define _DRIVERS_MISC_SGIXP_XPC_H
 
-#include <linux/interrupt.h>
-#include <linux/sysctl.h>
-#include <linux/device.h>
-#include <linux/mutex.h>
+#include <linux/wait.h>
 #include <linux/completion.h>
-#include <asm/pgtable.h>
-#include <asm/processor.h>
-#include <asm/sn/bte.h>
-#include <asm/sn/clksupport.h>
-#include <asm/sn/addrs.h>
-#include <asm/sn/mspec.h>
-#include <asm/sn/shub_mmr.h>
+#include <linux/timer.h>
+#include <linux/sched.h>
 #include "xp.h"
 
 /*
@@ -36,23 +28,7 @@
 #define XPC_VERSION_MAJOR(_v)           ((_v) >> 4)
 #define XPC_VERSION_MINOR(_v)           ((_v) & 0xf)
 
-/*
- * The next macros define word or bit representations for given
- * C-brick nasid in either the SAL provided bit array representing
- * nasids in the partition/machine or the AMO_t array used for
- * inter-partition initiation communications.
- *
- * For SN2 machines, C-Bricks are alway even numbered NASIDs.  As
- * such, some space will be saved by insisting that nasid information
- * passed from SAL always be packed for C-Bricks and the
- * cross-partition interrupts use the same packing scheme.
- */
-#define XPC_NASID_W_INDEX(_n)   (((_n) / 64) / 2)
-#define XPC_NASID_B_INDEX(_n)   (((_n) / 2) & (64 - 1))
-#define XPC_NASID_IN_ARRAY(_n, _p) ((_p)[XPC_NASID_W_INDEX(_n)] & \
-                                    (1UL << XPC_NASID_B_INDEX(_n)))
-#define XPC_NASID_FROM_W_B(_w, _b) (((_w) * 64 + (_b)) * 2)
-
+/* define frequency of the heartbeat and frequency how often it's checked */
 #define XPC_HB_DEFAULT_INTERVAL         5       /* incr HB every x secs */
 #define XPC_HB_CHECK_DEFAULT_INTERVAL   20      /* check HB every x secs */
 
@@ -72,11 +48,11 @@
  *
  *   reserved page header
  *
- *     The first cacheline of the reserved page contains the header
- *     (struct xpc_rsvd_page). Before SAL initialization has completed,
+ *     The first two 64-byte cachelines of the reserved page contain the
+ *     header (struct xpc_rsvd_page). Before SAL initialization has completed,
  *     SAL has set up the following fields of the reserved page header:
- *     SAL_signature, SAL_version, partid, and nasids_size. The other
- *     fields are set up by XPC. (xpc_rsvd_page points to the local
+ *     SAL_signature, SAL_version, SAL_partid, and SAL_nasids_size. The
+ *     other fields are set up by XPC. (xpc_rsvd_page points to the local
  *     partition's reserved page.)
  *
  *   part_nasids mask
@@ -87,14 +63,16 @@
  *     the actual nasids in the entire machine (mach_nasids). We're only
  *     interested in the even numbered nasids (which contain the processors
  *     and/or memory), so we only need half as many bits to represent the
- *     nasids. The part_nasids mask is located starting at the first cacheline
- *     following the reserved page header. The mach_nasids mask follows right
- *     after the part_nasids mask. The size in bytes of each mask is reflected
- *     by the reserved page header field 'nasids_size'. (Local partition's
- *     mask pointers are xpc_part_nasids and xpc_mach_nasids.)
+ *     nasids. When mapping nasid to bit in a mask (or bit to nasid) be sure
+ *     to either divide or multiply by 2. The part_nasids mask is located
+ *     starting at the first cacheline following the reserved page header. The
+ *     mach_nasids mask follows right after the part_nasids mask. The size in
+ *     bytes of each mask is reflected by the reserved page header field
+ *     'SAL_nasids_size'. (Local partition's mask pointers are xpc_part_nasids
+ *     and xpc_mach_nasids.)
  *
- *   vars
- *   vars part
+ *   vars       (ia64-sn2 only)
+ *   vars part  (ia64-sn2 only)
  *
  *     Immediately following the mach_nasids mask are the XPC variables
  *     required by other partitions. First are those that are generic to all
@@ -102,43 +80,26 @@
  *     which are partition specific (vars part). These are setup by XPC.
  *     (Local partition's vars pointers are xpc_vars and xpc_vars_part.)
  *
- * Note: Until vars_pa is set, the partition XPC code has not been initialized.
+ * Note: Until 'ts_jiffies' is set non-zero, the partition XPC code has not been
+ *       initialized.
  */
 struct xpc_rsvd_page {
         u64 SAL_signature;      /* SAL: unique signature */
         u64 SAL_version;        /* SAL: version */
-        u8 partid;              /* SAL: partition ID */
+        short SAL_partid;       /* SAL: partition ID */
+        short max_npartitions;  /* value of XPC_MAX_PARTITIONS */
         u8 version;
-        u8 pad1[6];             /* align to next u64 in cacheline */
-        u64 vars_pa;            /* physical address of struct xpc_vars */
-        struct timespec stamp;  /* time when reserved page was setup by XPC */
-        u64 pad2[9];            /* align to last u64 in cacheline */
-        u64 nasids_size;        /* SAL: size of each nasid mask in bytes */
+        u8 pad1[3];             /* align to next u64 in 1st 64-byte cacheline */
+        union {
+                unsigned long vars_pa;  /* phys address of struct xpc_vars */
+                unsigned long activate_mq_gpa; /* gru phy addr of activate_mq */
+        } sn;
+        unsigned long ts_jiffies; /* timestamp when rsvd pg was setup by XPC */
+        u64 pad2[10];           /* align to last u64 in 2nd 64-byte cacheline */
+        u64 SAL_nasids_size;    /* SAL: size of each nasid mask in bytes */
 };
 
-#define XPC_RP_VERSION _XPC_VERSION(1, 1) /* version 1.1 of the reserved page */
-
-#define XPC_SUPPORTS_RP_STAMP(_version) \
-                        (_version >= _XPC_VERSION(1, 1))
-
-/*
- * compare stamps - the return value is:
- *
- *      < 0,    if stamp1 < stamp2
- *      = 0,    if stamp1 == stamp2
- *      > 0,    if stamp1 > stamp2
- */
-static inline int
-xpc_compare_stamps(struct timespec *stamp1, struct timespec *stamp2)
-{
-        int ret;
-
-        ret = stamp1->tv_sec - stamp2->tv_sec;
-        if (ret == 0)
-                ret = stamp1->tv_nsec - stamp2->tv_nsec;
-
-        return ret;
-}
+#define XPC_RP_VERSION _XPC_VERSION(2, 0) /* version 2.0 of the reserved page */
 
 /*
  * Define the structures by which XPC variables can be exported to other
@@ -154,85 +115,40 @@ xpc_compare_stamps(struct timespec *stamp1, struct timespec *stamp2)
  * reflected by incrementing either the major or minor version numbers
  * of struct xpc_vars.
  */
-struct xpc_vars {
+struct xpc_vars_sn2 {
         u8 version;
         u64 heartbeat;
-        u64 heartbeating_to_mask;
+        DECLARE_BITMAP(heartbeating_to_mask, XP_MAX_NPARTITIONS_SN2);
         u64 heartbeat_offline;  /* if 0, heartbeat should be changing */
-        int act_nasid;
-        int act_phys_cpuid;
-        u64 vars_part_pa;
-        u64 amos_page_pa;       /* paddr of page of AMOs from MSPEC driver */
-        AMO_t *amos_page;       /* vaddr of page of AMOs from MSPEC driver */
+        int activate_IRQ_nasid;
+        int activate_IRQ_phys_cpuid;
+        unsigned long vars_part_pa;
+        unsigned long amos_page_pa;/* paddr of page of amos from MSPEC driver */
+        struct amo *amos_page;  /* vaddr of page of amos from MSPEC driver */
 };
 
 #define XPC_V_VERSION _XPC_VERSION(3, 1)    /* version 3.1 of the cross vars */
 
-#define XPC_SUPPORTS_DISENGAGE_REQUEST(_version) \
-                        (_version >= _XPC_VERSION(3, 1))
-
-static inline int
-xpc_hb_allowed(short partid, struct xpc_vars *vars)
-{
-        return ((vars->heartbeating_to_mask & (1UL << partid)) != 0);
-}
-
-static inline void
-xpc_allow_hb(short partid, struct xpc_vars *vars)
-{
-        u64 old_mask, new_mask;
-
-        do {
-                old_mask = vars->heartbeating_to_mask;
-                new_mask = (old_mask | (1UL << partid));
-        } while (cmpxchg(&vars->heartbeating_to_mask, old_mask, new_mask) !=
-                 old_mask);
-}
-
-static inline void
-xpc_disallow_hb(short partid, struct xpc_vars *vars)
-{
-        u64 old_mask, new_mask;
-
-        do {
-                old_mask = vars->heartbeating_to_mask;
-                new_mask = (old_mask & ~(1UL << partid));
-        } while (cmpxchg(&vars->heartbeating_to_mask, old_mask, new_mask) !=
-                 old_mask);
-}
-
-/*
- * The AMOs page consists of a number of AMO variables which are divided into
- * four groups, The first two groups are used to identify an IRQ's sender.
- * These two groups consist of 64 and 128 AMO variables respectively. The last
- * two groups, consisting of just one AMO variable each, are used to identify
- * the remote partitions that are currently engaged (from the viewpoint of
- * the XPC running on the remote partition).
- */
-#define XPC_NOTIFY_IRQ_AMOS        0
-#define XPC_ACTIVATE_IRQ_AMOS      (XPC_NOTIFY_IRQ_AMOS + XP_MAX_PARTITIONS)
-#define XPC_ENGAGED_PARTITIONS_AMO (XPC_ACTIVATE_IRQ_AMOS + XP_NASID_MASK_WORDS)
-#define XPC_DISENGAGE_REQUEST_AMO  (XPC_ENGAGED_PARTITIONS_AMO + 1)
-
 /*
  * The following structure describes the per partition specific variables.
  *
  * An array of these structures, one per partition, will be defined. As a
  * partition becomes active XPC will copy the array entry corresponding to
- * itself from that partition. It is desirable that the size of this
- * structure evenly divide into a cacheline, such that none of the entries
- * in this array crosses a cacheline boundary. As it is now, each entry
- * occupies half a cacheline.
+ * itself from that partition. It is desirable that the size of this structure
+ * evenly divides into a 128-byte cacheline, such that none of the entries in
+ * this array crosses a 128-byte cacheline boundary. As it is now, each entry
+ * occupies 64-bytes.
  */
-struct xpc_vars_part {
+struct xpc_vars_part_sn2 {
         u64 magic;
 
-        u64 openclose_args_pa;  /* physical address of open and close args */
-        u64 GPs_pa;             /* physical address of Get/Put values */
+        unsigned long openclose_args_pa; /* phys addr of open and close args */
+        unsigned long GPs_pa;   /* physical address of Get/Put values */
+
+        unsigned long chctl_amo_pa; /* physical address of chctl flags' amo */
 
-        u64 IPI_amo_pa;         /* physical address of IPI AMO_t structure */
-        int IPI_nasid;          /* nasid of where to send IPIs */
-        int IPI_phys_cpuid;     /* physical CPU ID of where to send IPIs */
+        int notify_IRQ_nasid;   /* nasid of where to send notify IRQs */
+        int notify_IRQ_phys_cpuid;      /* CPUID of where to send notify IRQs */
 
         u8 nchannels;           /* #of defined channels supported */
 
@@ -248,20 +164,95 @@ struct xpc_vars_part {
  * MAGIC2 indicates that this partition has pulled the remote partititions
  * per partition variables that pertain to this partition.
  */
-#define XPC_VP_MAGIC1   0x0053524156435058L   /* 'XPCVARS\0'L (little endian) */
-#define XPC_VP_MAGIC2   0x0073726176435058L   /* 'XPCvars\0'L (little endian) */
+#define XPC_VP_MAGIC1_SN2 0x0053524156435058L /* 'XPCVARS\0'L (little endian) */
+#define XPC_VP_MAGIC2_SN2 0x0073726176435058L /* 'XPCvars\0'L (little endian) */
 
 /* the reserved page sizes and offsets */
 
 #define XPC_RP_HEADER_SIZE      L1_CACHE_ALIGN(sizeof(struct xpc_rsvd_page))
-#define XPC_RP_VARS_SIZE        L1_CACHE_ALIGN(sizeof(struct xpc_vars))
+#define XPC_RP_VARS_SIZE        L1_CACHE_ALIGN(sizeof(struct xpc_vars_sn2))
 
-#define XPC_RP_PART_NASIDS(_rp) ((u64 *)((u8 *)(_rp) + XPC_RP_HEADER_SIZE))
-#define XPC_RP_MACH_NASIDS(_rp) (XPC_RP_PART_NASIDS(_rp) + xp_nasid_mask_words)
-#define XPC_RP_VARS(_rp)        ((struct xpc_vars *)(XPC_RP_MACH_NASIDS(_rp) + \
-                                    xp_nasid_mask_words))
-#define XPC_RP_VARS_PART(_rp)   ((struct xpc_vars_part *) \
-                                    ((u8 *)XPC_RP_VARS(_rp) + XPC_RP_VARS_SIZE))
+#define XPC_RP_PART_NASIDS(_rp) ((unsigned long *)((u8 *)(_rp) + \
+                                 XPC_RP_HEADER_SIZE))
+#define XPC_RP_MACH_NASIDS(_rp) (XPC_RP_PART_NASIDS(_rp) + \
+                                 xpc_nasid_mask_nlongs)
+#define XPC_RP_VARS(_rp)        ((struct xpc_vars_sn2 *) \
+                                 (XPC_RP_MACH_NASIDS(_rp) + \
+                                  xpc_nasid_mask_nlongs))
+
+/*
+ * The activate_mq is used to send/receive GRU messages that affect XPC's
+ * heartbeat, partition active state, and channel state. This is UV only.
+ */
+struct xpc_activate_mq_msghdr_uv {
+        short partid;           /* sender's partid */
+        u8 act_state;           /* sender's act_state at time msg sent */
+        u8 type;                /* message's type */
+        unsigned long rp_ts_jiffies; /* timestamp of sender's rp setup by XPC */
+};
+
+/* activate_mq defined message types */
+#define XPC_ACTIVATE_MQ_MSG_SYNC_ACT_STATE_UV           0
+#define XPC_ACTIVATE_MQ_MSG_INC_HEARTBEAT_UV            1
+#define XPC_ACTIVATE_MQ_MSG_OFFLINE_HEARTBEAT_UV        2
+#define XPC_ACTIVATE_MQ_MSG_ONLINE_HEARTBEAT_UV         3
+
+#define XPC_ACTIVATE_MQ_MSG_ACTIVATE_REQ_UV             4
+#define XPC_ACTIVATE_MQ_MSG_DEACTIVATE_REQ_UV           5
+
+#define XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREQUEST_UV       6
+#define XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREPLY_UV         7
+#define XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREQUEST_UV        8
+#define XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREPLY_UV          9
+
+#define XPC_ACTIVATE_MQ_MSG_MARK_ENGAGED_UV             10
+#define XPC_ACTIVATE_MQ_MSG_MARK_DISENGAGED_UV          11
+
+struct xpc_activate_mq_msg_uv {
+        struct xpc_activate_mq_msghdr_uv hdr;
+};
+
+struct xpc_activate_mq_msg_heartbeat_req_uv {
+        struct xpc_activate_mq_msghdr_uv hdr;
+        u64 heartbeat;
+};
+
+struct xpc_activate_mq_msg_activate_req_uv {
+        struct xpc_activate_mq_msghdr_uv hdr;
+        unsigned long rp_gpa;
+        unsigned long activate_mq_gpa;
+};
+
+struct xpc_activate_mq_msg_deactivate_req_uv {
+        struct xpc_activate_mq_msghdr_uv hdr;
+        enum xp_retval reason;
+};
+
+struct xpc_activate_mq_msg_chctl_closerequest_uv {
+        struct xpc_activate_mq_msghdr_uv hdr;
+        short ch_number;
+        enum xp_retval reason;
+};
+
+struct xpc_activate_mq_msg_chctl_closereply_uv {
+        struct xpc_activate_mq_msghdr_uv hdr;
+        short ch_number;
+};
+
+struct xpc_activate_mq_msg_chctl_openrequest_uv {
+        struct xpc_activate_mq_msghdr_uv hdr;
+        short ch_number;
+        short entry_size;       /* size of notify_mq's GRU messages */
+        short local_nentries;   /* ??? Is this needed? What is? */
+};
+
+struct xpc_activate_mq_msg_chctl_openreply_uv {
+        struct xpc_activate_mq_msghdr_uv hdr;
+        short ch_number;
+        short remote_nentries;  /* ??? Is this needed? What is? */
+        short local_nentries;   /* ??? Is this needed? What is? */
+        unsigned long local_notify_mq_gpa;
+};
 
 /*
  * Functions registered by add_timer() or called by kernel_thread() only
@@ -270,22 +261,22 @@ struct xpc_vars_part {
  * the passed argument.
  */
 #define XPC_PACK_ARGS(_arg1, _arg2) \
-                        ((((u64) _arg1) & 0xffffffff) | \
-                        ((((u64) _arg2) & 0xffffffff) << 32))
+                        ((((u64)_arg1) & 0xffffffff) | \
+                        ((((u64)_arg2) & 0xffffffff) << 32))
 
-#define XPC_UNPACK_ARG1(_args)  (((u64) _args) & 0xffffffff)
-#define XPC_UNPACK_ARG2(_args)  ((((u64) _args) >> 32) & 0xffffffff)
+#define XPC_UNPACK_ARG1(_args)  (((u64)_args) & 0xffffffff)
+#define XPC_UNPACK_ARG2(_args)  ((((u64)_args) >> 32) & 0xffffffff)
 
 /*
  * Define a Get/Put value pair (pointers) used with a message queue.
  */
-struct xpc_gp {
+struct xpc_gp_sn2 {
         s64 get;                /* Get value */
         s64 put;                /* Put value */
 };
 
 #define XPC_GP_SIZE \
-                L1_CACHE_ALIGN(sizeof(struct xpc_gp) * XPC_NCHANNELS)
+                L1_CACHE_ALIGN(sizeof(struct xpc_gp_sn2) * XPC_MAX_NCHANNELS)
 
 /*
  * Define a structure that contains arguments associated with opening and
@@ -293,31 +284,89 @@ struct xpc_gp {
  */
 struct xpc_openclose_args {
         u16 reason;             /* reason why channel is closing */
-        u16 msg_size;           /* sizeof each message entry */
+        u16 entry_size;         /* sizeof each message entry */
         u16 remote_nentries;    /* #of message entries in remote msg queue */
         u16 local_nentries;     /* #of message entries in local msg queue */
-        u64 local_msgqueue_pa;  /* physical address of local message queue */
+        unsigned long local_msgqueue_pa; /* phys addr of local message queue */
 };
 
 #define XPC_OPENCLOSE_ARGS_SIZE \
-              L1_CACHE_ALIGN(sizeof(struct xpc_openclose_args) * XPC_NCHANNELS)
+              L1_CACHE_ALIGN(sizeof(struct xpc_openclose_args) * \
+              XPC_MAX_NCHANNELS)
 
-/* struct xpc_msg flags */
 
-#define XPC_M_DONE              0x01    /* msg has been received/consumed */
-#define XPC_M_READY             0x02    /* msg is ready to be sent */
-#define XPC_M_INTERRUPT         0x04    /* send interrupt when msg consumed */
+/*
+ * Structures to define a fifo singly-linked list.
+ */
 
-#define XPC_MSG_ADDRESS(_payload) \
-                ((struct xpc_msg *)((u8 *)(_payload) - XPC_MSG_PAYLOAD_OFFSET))
+struct xpc_fifo_entry_uv {
+        struct xpc_fifo_entry_uv *next;
+};
+
+struct xpc_fifo_head_uv {
+        struct xpc_fifo_entry_uv *first;
+        struct xpc_fifo_entry_uv *last;
+        spinlock_t lock;
+        int n_entries;
+};
 
 /*
- * Defines notify entry.
+ * Define a sn2 styled message.
+ *
+ * A user-defined message resides in the payload area. The max size of the
+ * payload is defined by the user via xpc_connect().
+ *
+ * The size of a message entry (within a message queue) must be a 128-byte
+ * cacheline sized multiple in order to facilitate the BTE transfer of messages
+ * from one message queue to another.
+ */
+struct xpc_msg_sn2 {
+        u8 flags;               /* FOR XPC INTERNAL USE ONLY */
+        u8 reserved[7];         /* FOR XPC INTERNAL USE ONLY */
+        s64 number;             /* FOR XPC INTERNAL USE ONLY */
+
+        u64 payload;            /* user defined portion of message */
+};
+
+/* struct xpc_msg_sn2 flags */
+
+#define XPC_M_SN2_DONE          0x01    /* msg has been received/consumed */
+#define XPC_M_SN2_READY         0x02    /* msg is ready to be sent */
+#define XPC_M_SN2_INTERRUPT     0x04    /* send interrupt when msg consumed */
+
+/*
+ * The format of a uv XPC notify_mq GRU message is as follows:
+ *
+ * A user-defined message resides in the payload area. The max size of the
+ * payload is defined by the user via xpc_connect().
+ *
+ * The size of a message (payload and header) sent via the GRU must be either 1
+ * or 2 GRU_CACHE_LINE_BYTES in length.
+ */
+
+struct xpc_notify_mq_msghdr_uv {
+        union {
+                unsigned int gru_msg_hdr;       /* FOR GRU INTERNAL USE ONLY */
+                struct xpc_fifo_entry_uv next;  /* FOR XPC INTERNAL USE ONLY */
+        } u;
+        short partid;           /* FOR XPC INTERNAL USE ONLY */
+        u8 ch_number;           /* FOR XPC INTERNAL USE ONLY */
+        u8 size;                /* FOR XPC INTERNAL USE ONLY */
+        unsigned int msg_slot_number;   /* FOR XPC INTERNAL USE ONLY */
+};
+
+struct xpc_notify_mq_msg_uv {
+        struct xpc_notify_mq_msghdr_uv hdr;
+        unsigned long payload;
+};
+
+/*
+ * Define sn2's notify entry.
  *
  * This is used to notify a message's sender that their message was received
  * and consumed by the intended recipient.
  */
-struct xpc_notify {
+struct xpc_notify_sn2 {
         u8 type;                /* type of notification */
 
         /* the following two fields are only used if type == XPC_N_CALL */
@@ -325,9 +374,20 @@ struct xpc_notify {
         void *key;              /* pointer to user's key */
 };
 
-/* struct xpc_notify type of notification */
+/* struct xpc_notify_sn2 type of notification */
+
+#define XPC_N_CALL      0x01    /* notify function provided by user */
 
-#define XPC_N_CALL              0x01    /* notify function provided by user */
+/*
+ * Define uv's version of the notify entry. It additionally is used to allocate
+ * a msg slot on the remote partition into which is copied a sent message.
+ */
+struct xpc_send_msg_slot_uv {
+        struct xpc_fifo_entry_uv next;
+        unsigned int msg_slot_number;
+        xpc_notify_func func;   /* user's notify function */
+        void *key;              /* pointer to user's key */
+};
 
 /*
  * Define the structure that manages all the stuff required by a channel. In
@@ -339,8 +399,12 @@ struct xpc_notify {
  * There is an array of these structures for each remote partition. It is
  * allocated at the time a partition becomes active. The array contains one
  * of these structures for each potential channel connection to that partition.
+ */
+
+/*
+ * The following is sn2 only.
  *
- * Each of these structures manages two message queues (circular buffers).
+ * Each channel structure manages two message queues (circular buffers).
  * They are allocated at the time a channel connection is made. One of
  * these message queues (local_msgqueue) holds the locally created messages
  * that are destined for the remote partition. The other of these message
@@ -407,58 +471,72 @@ struct xpc_notify {
  *      new messages, by the clearing of the message flags of the acknowledged
  *      messages.
  */
+
+struct xpc_channel_sn2 {
+        struct xpc_openclose_args *local_openclose_args; /* args passed on */
+                                             /* opening or closing of channel */
+
+        void *local_msgqueue_base;      /* base address of kmalloc'd space */
+        struct xpc_msg_sn2 *local_msgqueue;     /* local message queue */
+        void *remote_msgqueue_base;     /* base address of kmalloc'd space */
+        struct xpc_msg_sn2 *remote_msgqueue; /* cached copy of remote */
+                                           /* partition's local message queue */
+        unsigned long remote_msgqueue_pa; /* phys addr of remote partition's */
+                                          /* local message queue */
+
+        struct xpc_notify_sn2 *notify_queue;/* notify queue for messages sent */
+
+        /* various flavors of local and remote Get/Put values */
+
+        struct xpc_gp_sn2 *local_GP;    /* local Get/Put values */
+        struct xpc_gp_sn2 remote_GP;    /* remote Get/Put values */
+        struct xpc_gp_sn2 w_local_GP;   /* working local Get/Put values */
+        struct xpc_gp_sn2 w_remote_GP;  /* working remote Get/Put values */
+        s64 next_msg_to_pull;   /* Put value of next msg to pull */
+
+        struct mutex msg_to_pull_mutex; /* next msg to pull serialization */
+};
+
+struct xpc_channel_uv {
+        unsigned long remote_notify_mq_gpa;     /* gru phys address of remote */
+                                                /* partition's notify mq */
+
+        struct xpc_send_msg_slot_uv *send_msg_slots;
+        struct xpc_notify_mq_msg_uv *recv_msg_slots;
+
+        struct xpc_fifo_head_uv msg_slot_free_list;
+        struct xpc_fifo_head_uv recv_msg_list;  /* deliverable payloads */
+};
+
 struct xpc_channel {
         short partid;           /* ID of remote partition connected */
         spinlock_t lock;        /* lock for updating this structure */
-        u32 flags;              /* general flags */
+        unsigned int flags;     /* general flags */
 
         enum xp_retval reason;  /* reason why channel is disconnect'g */
         int reason_line;        /* line# disconnect initiated from */
 
         u16 number;             /* channel # */
 
-        u16 msg_size;           /* sizeof each msg entry */
+        u16 entry_size;         /* sizeof each msg entry */
         u16 local_nentries;     /* #of msg entries in local msg queue */
         u16 remote_nentries;    /* #of msg entries in remote msg queue */
 
-        void *local_msgqueue_base;      /* base address of kmalloc'd space */
-        struct xpc_msg *local_msgqueue; /* local message queue */
-        void *remote_msgqueue_base;     /* base address of kmalloc'd space */
-        struct xpc_msg *remote_msgqueue; /* cached copy of remote partition's */
-                                         /* local message queue */
-        u64 remote_msgqueue_pa; /* phys addr of remote partition's */
-                                /* local message queue */
-
         atomic_t references;    /* #of external references to queues */
 
         atomic_t n_on_msg_allocate_wq;  /* #on msg allocation wait queue */
         wait_queue_head_t msg_allocate_wq;      /* msg allocation wait queue */
 
-        u8 delayed_IPI_flags;   /* IPI flags received, but delayed */
+        u8 delayed_chctl_flags; /* chctl flags received, but delayed */
                                 /* action until channel disconnected */
 
-        /* queue of msg senders who want to be notified when msg received */
-
         atomic_t n_to_notify;   /* #of msg senders to notify */
-        struct xpc_notify *notify_queue;    /* notify queue for messages sent */
 
         xpc_channel_func func;  /* user's channel function */
         void *key;              /* pointer to user's key */
 
-        struct mutex msg_to_pull_mutex; /* next msg to pull serialization */
         struct completion wdisconnect_wait;    /* wait for channel disconnect */
 
-        struct xpc_openclose_args *local_openclose_args; /* args passed on */
-                                             /* opening or closing of channel */
-
-        /* various flavors of local and remote Get/Put values */
-
-        struct xpc_gp *local_GP;        /* local Get/Put values */
-        struct xpc_gp remote_GP;        /* remote Get/Put values */
-        struct xpc_gp w_local_GP;       /* working local Get/Put values */
-        struct xpc_gp w_remote_GP;      /* working remote Get/Put values */
-        s64 next_msg_to_pull;   /* Put value of next msg to pull */
-
         /* kthread management related fields */
 
         atomic_t kthreads_assigned;     /* #of kthreads assigned to channel */
@@ -469,6 +547,11 @@ struct xpc_channel {
 
         wait_queue_head_t idle_wq;      /* idle kthread wait queue */
 
+        union {
+                struct xpc_channel_sn2 sn2;
+                struct xpc_channel_uv uv;
+        } sn;
+
 } ____cacheline_aligned;
 
 /* struct xpc_channel flags */
@@ -501,33 +584,128 @@ struct xpc_channel {
 #define XPC_C_WDISCONNECT       0x00040000  /* waiting for channel disconnect */
 
 /*
- * Manages channels on a partition basis. There is one of these structures
+ * The channel control flags (chctl) union consists of a 64-bit variable which
+ * is divided up into eight bytes, ordered from right to left. Byte zero
+ * pertains to channel 0, byte one to channel 1, and so on. Each channel's byte
+ * can have one or more of the chctl flags set in it.
+ */
+
+union xpc_channel_ctl_flags {
+        u64 all_flags;
+        u8 flags[XPC_MAX_NCHANNELS];
+};
+
+/* chctl flags */
+#define XPC_CHCTL_CLOSEREQUEST  0x01
+#define XPC_CHCTL_CLOSEREPLY    0x02
+#define XPC_CHCTL_OPENREQUEST   0x04
+#define XPC_CHCTL_OPENREPLY     0x08
+#define XPC_CHCTL_MSGREQUEST    0x10
+
+#define XPC_OPENCLOSE_CHCTL_FLAGS \
+                        (XPC_CHCTL_CLOSEREQUEST | XPC_CHCTL_CLOSEREPLY | \
+                         XPC_CHCTL_OPENREQUEST | XPC_CHCTL_OPENREPLY)
+#define XPC_MSG_CHCTL_FLAGS     XPC_CHCTL_MSGREQUEST
+
+static inline int
+xpc_any_openclose_chctl_flags_set(union xpc_channel_ctl_flags *chctl)
+{
+        int ch_number;
+
+        for (ch_number = 0; ch_number < XPC_MAX_NCHANNELS; ch_number++) {
+                if (chctl->flags[ch_number] & XPC_OPENCLOSE_CHCTL_FLAGS)
+                        return 1;
+        }
+        return 0;
+}
+
+static inline int
+xpc_any_msg_chctl_flags_set(union xpc_channel_ctl_flags *chctl)
+{
+        int ch_number;
+
+        for (ch_number = 0; ch_number < XPC_MAX_NCHANNELS; ch_number++) {
+                if (chctl->flags[ch_number] & XPC_MSG_CHCTL_FLAGS)
+                        return 1;
+        }
+        return 0;
+}
+
+/*
+ * Manage channels on a partition basis. There is one of these structures
  * for each partition (a partition will never utilize the structure that
  * represents itself).
  */
+
+struct xpc_partition_sn2 {
+        unsigned long remote_amos_page_pa; /* paddr of partition's amos page */
+        int activate_IRQ_nasid; /* active partition's act/deact nasid */
+        int activate_IRQ_phys_cpuid;    /* active part's act/deact phys cpuid */
+
+        unsigned long remote_vars_pa;   /* phys addr of partition's vars */
+        unsigned long remote_vars_part_pa; /* paddr of partition's vars part */
+        u8 remote_vars_version; /* version# of partition's vars */
+
+        void *local_GPs_base;   /* base address of kmalloc'd space */
+        struct xpc_gp_sn2 *local_GPs;   /* local Get/Put values */
+        void *remote_GPs_base;  /* base address of kmalloc'd space */
+        struct xpc_gp_sn2 *remote_GPs;  /* copy of remote partition's local */
+                                        /* Get/Put values */
+        unsigned long remote_GPs_pa; /* phys addr of remote partition's local */
+                                     /* Get/Put values */
+
+        void *local_openclose_args_base;   /* base address of kmalloc'd space */
+        struct xpc_openclose_args *local_openclose_args;      /* local's args */
+        unsigned long remote_openclose_args_pa; /* phys addr of remote's args */
+
+        int notify_IRQ_nasid;   /* nasid of where to send notify IRQs */
+        int notify_IRQ_phys_cpuid;      /* CPUID of where to send notify IRQs */
+        char notify_IRQ_owner[8];       /* notify IRQ's owner's name */
+
+        struct amo *remote_chctl_amo_va; /* addr of remote chctl flags' amo */
+        struct amo *local_chctl_amo_va; /* address of chctl flags' amo */
+
+        struct timer_list dropped_notify_IRQ_timer;     /* dropped IRQ timer */
+};
+
+struct xpc_partition_uv {
+        unsigned long remote_activate_mq_gpa;   /* gru phys address of remote */
+                                                /* partition's activate mq */
+        spinlock_t flags_lock;  /* protect updating of flags */
+        unsigned int flags;     /* general flags */
+        u8 remote_act_state;    /* remote partition's act_state */
+        u8 act_state_req;       /* act_state request from remote partition */
+        enum xp_retval reason;  /* reason for deactivate act_state request */
+        u64 heartbeat;          /* incremented by remote partition */
+};
+
+/* struct xpc_partition_uv flags */
+
+#define XPC_P_HEARTBEAT_OFFLINE_UV      0x00000001
+#define XPC_P_ENGAGED_UV                0x00000002
+
+/* struct xpc_partition_uv act_state change requests */
+
+#define XPC_P_ASR_ACTIVATE_UV           0x01
+#define XPC_P_ASR_REACTIVATE_UV         0x02
+#define XPC_P_ASR_DEACTIVATE_UV         0x03
+
 struct xpc_partition {
 
         /* XPC HB infrastructure */
 
         u8 remote_rp_version;   /* version# of partition's rsvd pg */
-        struct timespec remote_rp_stamp; /* time when rsvd pg was initialized */
-        u64 remote_rp_pa;       /* phys addr of partition's rsvd pg */
-        u64 remote_vars_pa;     /* phys addr of partition's vars */
-        u64 remote_vars_part_pa;        /* phys addr of partition's vars part */
+        unsigned long remote_rp_ts_jiffies; /* timestamp when rsvd pg setup */
+        unsigned long remote_rp_pa;     /* phys addr of partition's rsvd pg */
         u64 last_heartbeat;     /* HB at last read */
-        u64 remote_amos_page_pa;        /* phys addr of partition's amos page */
-        int remote_act_nasid;   /* active part's act/deact nasid */
-        int remote_act_phys_cpuid;      /* active part's act/deact phys cpuid */
-        u32 act_IRQ_rcvd;       /* IRQs since activation */
+        u32 activate_IRQ_rcvd;  /* IRQs since activation */
         spinlock_t act_lock;    /* protect updating of act_state */
         u8 act_state;           /* from XPC HB viewpoint */
-        u8 remote_vars_version; /* version# of partition's vars */
         enum xp_retval reason;  /* reason partition is deactivating */
         int reason_line;        /* line# deactivation initiated from */
-        int reactivate_nasid;   /* nasid in partition to reactivate */
 
-        unsigned long disengage_request_timeout;        /* timeout in jiffies */
-        struct timer_list disengage_request_timer;
+        unsigned long disengage_timeout;        /* timeout in jiffies */
+        struct timer_list disengage_timer;
 
         /* XPC infrastructure referencing and teardown control */
 
@@ -535,85 +713,63 @@ struct xpc_partition {
         wait_queue_head_t teardown_wq;  /* kthread waiting to teardown infra */
         atomic_t references;    /* #of references to infrastructure */
 
-        /*
-         * NONE OF THE PRECEDING FIELDS OF THIS STRUCTURE WILL BE CLEARED WHEN
-         * XPC SETS UP THE NECESSARY INFRASTRUCTURE TO SUPPORT CROSS PARTITION
-         * COMMUNICATION. ALL OF THE FOLLOWING FIELDS WILL BE CLEARED. (THE
-         * 'nchannels' FIELD MUST BE THE FIRST OF THE FIELDS TO BE CLEARED.)
-         */
-
         u8 nchannels;           /* #of defined channels supported */
         atomic_t nchannels_active;  /* #of channels that are not DISCONNECTED */
         atomic_t nchannels_engaged;  /* #of channels engaged with remote part */
         struct xpc_channel *channels;   /* array of channel structures */
 
-        void *local_GPs_base;   /* base address of kmalloc'd space */
-        struct xpc_gp *local_GPs;       /* local Get/Put values */
-        void *remote_GPs_base;  /* base address of kmalloc'd space */
-        struct xpc_gp *remote_GPs;      /* copy of remote partition's local */
-                                        /* Get/Put values */
-        u64 remote_GPs_pa;      /* phys address of remote partition's local */
-                                /* Get/Put values */
+        /* fields used for managing channel avialability and activity */
 
-        /* fields used to pass args when opening or closing a channel */
+        union xpc_channel_ctl_flags chctl; /* chctl flags yet to be processed */
+        spinlock_t chctl_lock;  /* chctl flags lock */
 
-        void *local_openclose_args_base;   /* base address of kmalloc'd space */
-        struct xpc_openclose_args *local_openclose_args;      /* local's args */
         void *remote_openclose_args_base;  /* base address of kmalloc'd space */
         struct xpc_openclose_args *remote_openclose_args; /* copy of remote's */
                                                           /* args */
-        u64 remote_openclose_args_pa;   /* phys addr of remote's args */
-
-        /* IPI sending, receiving and handling related fields */
-
-        int remote_IPI_nasid;   /* nasid of where to send IPIs */
-        int remote_IPI_phys_cpuid;      /* phys CPU ID of where to send IPIs */
-        AMO_t *remote_IPI_amo_va;    /* address of remote IPI AMO_t structure */
-
-        AMO_t *local_IPI_amo_va;        /* address of IPI AMO_t structure */
-        u64 local_IPI_amo;      /* IPI amo flags yet to be handled */
-        char IPI_owner[8];      /* IPI owner's name */
-        struct timer_list dropped_IPI_timer;    /* dropped IPI timer */
-
-        spinlock_t IPI_lock;    /* IPI handler lock */
 
         /* channel manager related fields */
 
         atomic_t channel_mgr_requests;  /* #of requests to activate chan mgr */
         wait_queue_head_t channel_mgr_wq;       /* channel mgr's wait queue */
 
+        union {
+                struct xpc_partition_sn2 sn2;
+                struct xpc_partition_uv uv;
+        } sn;
+
 } ____cacheline_aligned;
 
 /* struct xpc_partition act_state values (for XPC HB) */
 
-#define XPC_P_INACTIVE          0x00    /* partition is not active */
-#define XPC_P_ACTIVATION_REQ    0x01    /* created thread to activate */
-#define XPC_P_ACTIVATING        0x02    /* activation thread started */
-#define XPC_P_ACTIVE            0x03    /* xpc_partition_up() was called */
-#define XPC_P_DEACTIVATING      0x04    /* partition deactivation initiated */
+#define XPC_P_AS_INACTIVE       0x00    /* partition is not active */
+#define XPC_P_AS_ACTIVATION_REQ 0x01    /* created thread to activate */
+#define XPC_P_AS_ACTIVATING     0x02    /* activation thread started */
+#define XPC_P_AS_ACTIVE         0x03    /* xpc_partition_up() was called */
+#define XPC_P_AS_DEACTIVATING   0x04    /* partition deactivation initiated */
 
 #define XPC_DEACTIVATE_PARTITION(_p, _reason) \
                         xpc_deactivate_partition(__LINE__, (_p), (_reason))
 
 /* struct xpc_partition setup_state values */
 
-#define XPC_P_UNSET             0x00    /* infrastructure was never setup */
-#define XPC_P_SETUP             0x01    /* infrastructure is setup */
-#define XPC_P_WTEARDOWN         0x02    /* waiting to teardown infrastructure */
-#define XPC_P_TORNDOWN          0x03    /* infrastructure is torndown */
+#define XPC_P_SS_UNSET          0x00    /* infrastructure was never setup */
+#define XPC_P_SS_SETUP          0x01    /* infrastructure is setup */
+#define XPC_P_SS_WTEARDOWN      0x02    /* waiting to teardown infrastructure */
+#define XPC_P_SS_TORNDOWN       0x03    /* infrastructure is torndown */
 
 /*
- * struct xpc_partition IPI_timer #of seconds to wait before checking for
- * dropped IPIs. These occur whenever an IPI amo write doesn't complete until
- * after the IPI was received.
+ * struct xpc_partition_sn2's dropped notify IRQ timer is set to wait the
+ * following interval #of seconds before checking for dropped notify IRQs.
+ * These can occur whenever an IRQ's associated amo write doesn't complete
+ * until after the IRQ was received.
  */
-#define XPC_P_DROPPED_IPI_WAIT  (0.25 * HZ)
+#define XPC_DROPPED_NOTIFY_IRQ_WAIT_INTERVAL    (0.25 * HZ)
 
 /* number of seconds to wait for other partitions to disengage */
-#define XPC_DISENGAGE_REQUEST_DEFAULT_TIMELIMIT 90
+#define XPC_DISENGAGE_DEFAULT_TIMELIMIT         90
 
-/* interval in seconds to print 'waiting disengagement' messages */
-#define XPC_DISENGAGE_PRINTMSG_INTERVAL         10
+/* interval in seconds to print 'waiting deactivation' messages */
+#define XPC_DEACTIVATE_PRINTMSG_INTERVAL        10
 
 #define XPC_PARTID(_p)  ((short)((_p) - &xpc_partitions[0]))
 
@@ -623,33 +779,92 @@ extern struct xpc_registration xpc_registrations[];
 /* found in xpc_main.c */
 extern struct device *xpc_part;
 extern struct device *xpc_chan;
-extern int xpc_disengage_request_timelimit;
-extern int xpc_disengage_request_timedout;
-extern irqreturn_t xpc_notify_IRQ_handler(int, void *);
-extern void xpc_dropped_IPI_check(struct xpc_partition *);
+extern int xpc_disengage_timelimit;
+extern int xpc_disengage_timedout;
+extern int xpc_activate_IRQ_rcvd;
+extern spinlock_t xpc_activate_IRQ_rcvd_lock;
+extern wait_queue_head_t xpc_activate_IRQ_wq;
+extern void *xpc_heartbeating_to_mask;
+extern void *xpc_kzalloc_cacheline_aligned(size_t, gfp_t, void **);
 extern void xpc_activate_partition(struct xpc_partition *);
 extern void xpc_activate_kthreads(struct xpc_channel *, int);
 extern void xpc_create_kthreads(struct xpc_channel *, int, int);
 extern void xpc_disconnect_wait(int);
+extern int (*xpc_setup_partitions_sn) (void);
+extern enum xp_retval (*xpc_get_partition_rsvd_page_pa) (void *, u64 *,
+                                                         unsigned long *,
+                                                         size_t *);
+extern int (*xpc_setup_rsvd_page_sn) (struct xpc_rsvd_page *);
+extern void (*xpc_heartbeat_init) (void);
+extern void (*xpc_heartbeat_exit) (void);
+extern void (*xpc_increment_heartbeat) (void);
+extern void (*xpc_offline_heartbeat) (void);
+extern void (*xpc_online_heartbeat) (void);
+extern enum xp_retval (*xpc_get_remote_heartbeat) (struct xpc_partition *);
+extern enum xp_retval (*xpc_make_first_contact) (struct xpc_partition *);
+extern u64 (*xpc_get_chctl_all_flags) (struct xpc_partition *);
+extern enum xp_retval (*xpc_setup_msg_structures) (struct xpc_channel *);
+extern void (*xpc_teardown_msg_structures) (struct xpc_channel *);
+extern void (*xpc_notify_senders_of_disconnect) (struct xpc_channel *);
+extern void (*xpc_process_msg_chctl_flags) (struct xpc_partition *, int);
+extern int (*xpc_n_of_deliverable_payloads) (struct xpc_channel *);
+extern void *(*xpc_get_deliverable_payload) (struct xpc_channel *);
+extern void (*xpc_request_partition_activation) (struct xpc_rsvd_page *,
+                                                 unsigned long, int);
+extern void (*xpc_request_partition_reactivation) (struct xpc_partition *);
+extern void (*xpc_request_partition_deactivation) (struct xpc_partition *);
+extern void (*xpc_cancel_partition_deactivation_request) (
+                                                        struct xpc_partition *);
+extern void (*xpc_process_activate_IRQ_rcvd) (void);
+extern enum xp_retval (*xpc_setup_ch_structures_sn) (struct xpc_partition *);
+extern void (*xpc_teardown_ch_structures_sn) (struct xpc_partition *);
+
+extern void (*xpc_indicate_partition_engaged) (struct xpc_partition *);
+extern int (*xpc_partition_engaged) (short);
+extern int (*xpc_any_partition_engaged) (void);
+extern void (*xpc_indicate_partition_disengaged) (struct xpc_partition *);
+extern void (*xpc_assume_partition_disengaged) (short);
+
+extern void (*xpc_send_chctl_closerequest) (struct xpc_channel *,
+                                            unsigned long *);
+extern void (*xpc_send_chctl_closereply) (struct xpc_channel *,
+                                          unsigned long *);
+extern void (*xpc_send_chctl_openrequest) (struct xpc_channel *,
+                                           unsigned long *);
+extern void (*xpc_send_chctl_openreply) (struct xpc_channel *, unsigned long *);
+
+extern void (*xpc_save_remote_msgqueue_pa) (struct xpc_channel *,
+                                            unsigned long);
+
+extern enum xp_retval (*xpc_send_payload) (struct xpc_channel *, u32, void *,
+                                           u16, u8, xpc_notify_func, void *);
+extern void (*xpc_received_payload) (struct xpc_channel *, void *);
+
+/* found in xpc_sn2.c */
+extern int xpc_init_sn2(void);
+extern void xpc_exit_sn2(void);
+
+/* found in xpc_uv.c */
+extern int xpc_init_uv(void);
+extern void xpc_exit_uv(void);
 
 /* found in xpc_partition.c */
 extern int xpc_exiting;
-extern struct xpc_vars *xpc_vars;
+extern int xpc_nasid_mask_nlongs;
 extern struct xpc_rsvd_page *xpc_rsvd_page;
-extern struct xpc_vars_part *xpc_vars_part;
-extern struct xpc_partition xpc_partitions[XP_MAX_PARTITIONS + 1];
-extern char *xpc_remote_copy_buffer;
-extern void *xpc_remote_copy_buffer_base;
+extern unsigned long *xpc_mach_nasids;
+extern struct xpc_partition *xpc_partitions;
 extern void *xpc_kmalloc_cacheline_aligned(size_t, gfp_t, void **);
-extern struct xpc_rsvd_page *xpc_rsvd_page_init(void);
-extern void xpc_allow_IPI_ops(void);
-extern void xpc_restrict_IPI_ops(void);
-extern int xpc_identify_act_IRQ_sender(void);
+extern int xpc_setup_rsvd_page(void);
+extern void xpc_teardown_rsvd_page(void);
+extern int xpc_identify_activate_IRQ_sender(void);
 extern int xpc_partition_disengaged(struct xpc_partition *);
 extern enum xp_retval xpc_mark_partition_active(struct xpc_partition *);
 extern void xpc_mark_partition_inactive(struct xpc_partition *);
 extern void xpc_discovery(void);
-extern void xpc_check_remote_hb(void);
+extern enum xp_retval xpc_get_remote_rp(int, unsigned long *,
+                                        struct xpc_rsvd_page *,
+                                        unsigned long *);
 extern void xpc_deactivate_partition(const int, struct xpc_partition *,
                                      enum xp_retval);
 extern enum xp_retval xpc_initiate_partid_to_nasids(short, void *);
@@ -657,21 +872,52 @@ extern enum xp_retval xpc_initiate_partid_to_nasids(short, void *);
 /* found in xpc_channel.c */
 extern void xpc_initiate_connect(int);
 extern void xpc_initiate_disconnect(int);
-extern enum xp_retval xpc_initiate_allocate(short, int, u32, void **);
-extern enum xp_retval xpc_initiate_send(short, int, void *);
-extern enum xp_retval xpc_initiate_send_notify(short, int, void *,
+extern enum xp_retval xpc_allocate_msg_wait(struct xpc_channel *);
+extern enum xp_retval xpc_initiate_send(short, int, u32, void *, u16);
+extern enum xp_retval xpc_initiate_send_notify(short, int, u32, void *, u16,
                                                xpc_notify_func, void *);
 extern void xpc_initiate_received(short, int, void *);
-extern enum xp_retval xpc_setup_infrastructure(struct xpc_partition *);
-extern enum xp_retval xpc_pull_remote_vars_part(struct xpc_partition *);
-extern void xpc_process_channel_activity(struct xpc_partition *);
+extern void xpc_process_sent_chctl_flags(struct xpc_partition *);
 extern void xpc_connected_callout(struct xpc_channel *);
-extern void xpc_deliver_msg(struct xpc_channel *);
+extern void xpc_deliver_payload(struct xpc_channel *);
 extern void xpc_disconnect_channel(const int, struct xpc_channel *,
                                    enum xp_retval, unsigned long *);
 extern void xpc_disconnect_callout(struct xpc_channel *, enum xp_retval);
 extern void xpc_partition_going_down(struct xpc_partition *, enum xp_retval);
-extern void xpc_teardown_infrastructure(struct xpc_partition *);
+
+static inline int
+xpc_hb_allowed(short partid, void *heartbeating_to_mask)
+{
+        return test_bit(partid, heartbeating_to_mask);
+}
+
+static inline int
+xpc_any_hbs_allowed(void)
+{
+        DBUG_ON(xpc_heartbeating_to_mask == NULL);
+        return !bitmap_empty(xpc_heartbeating_to_mask, xp_max_npartitions);
+}
+
+static inline void
+xpc_allow_hb(short partid)
+{
+        DBUG_ON(xpc_heartbeating_to_mask == NULL);
+        set_bit(partid, xpc_heartbeating_to_mask);
+}
+
+static inline void
+xpc_disallow_hb(short partid)
+{
+        DBUG_ON(xpc_heartbeating_to_mask == NULL);
+        clear_bit(partid, xpc_heartbeating_to_mask);
+}
+
+static inline void
+xpc_disallow_all_hbs(void)
+{
+        DBUG_ON(xpc_heartbeating_to_mask == NULL);
+        bitmap_zero(xpc_heartbeating_to_mask, xp_max_npartitions);
+}
 
 static inline void
 xpc_wakeup_channel_mgr(struct xpc_partition *part)
@@ -713,7 +959,7 @@ xpc_part_deref(struct xpc_partition *part)
         s32 refs = atomic_dec_return(&part->references);
 
         DBUG_ON(refs < 0);
-        if (refs == 0 && part->setup_state == XPC_P_WTEARDOWN)
+        if (refs == 0 && part->setup_state == XPC_P_SS_WTEARDOWN)
                 wake_up(&part->teardown_wq);
 }
 
@@ -723,7 +969,7 @@ xpc_part_ref(struct xpc_partition *part)
         int setup;
 
         atomic_inc(&part->references);
-        setup = (part->setup_state == XPC_P_SETUP);
+        setup = (part->setup_state == XPC_P_SS_SETUP);
         if (!setup)
                 xpc_part_deref(part);
 
@@ -741,416 +987,4 @@ xpc_part_ref(struct xpc_partition *part)
                 (_p)->reason_line = _line; \
         }
 
-/*
- * This next set of inlines are used to keep track of when a partition is
- * potentially engaged in accessing memory belonging to another partition.
- */
-
-static inline void
-xpc_mark_partition_engaged(struct xpc_partition *part)
-{
-        unsigned long irq_flags;
-        AMO_t *amo = (AMO_t *)__va(part->remote_amos_page_pa +
-                                   (XPC_ENGAGED_PARTITIONS_AMO *
-                                    sizeof(AMO_t)));
-
-        local_irq_save(irq_flags);
-
-        /* set bit corresponding to our partid in remote partition's AMO */
-        FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_OR,
-                         (1UL << sn_partition_id));
-        /*
-         * We must always use the nofault function regardless of whether we
-         * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
-         * didn't, we'd never know that the other partition is down and would
-         * keep sending IPIs and AMOs to it until the heartbeat times out.
-         */
-        (void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo->
-                                                               variable),
-                                                     xp_nofault_PIOR_target));
-
-        local_irq_restore(irq_flags);
-}
-
-static inline void
-xpc_mark_partition_disengaged(struct xpc_partition *part)
-{
-        unsigned long irq_flags;
-        AMO_t *amo = (AMO_t *)__va(part->remote_amos_page_pa +
-                                   (XPC_ENGAGED_PARTITIONS_AMO *
-                                    sizeof(AMO_t)));
-
-        local_irq_save(irq_flags);
-
-        /* clear bit corresponding to our partid in remote partition's AMO */
-        FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_AND,
-                         ~(1UL << sn_partition_id));
-        /*
-         * We must always use the nofault function regardless of whether we
-         * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
-         * didn't, we'd never know that the other partition is down and would
-         * keep sending IPIs and AMOs to it until the heartbeat times out.
-         */
-        (void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo->
-                                                               variable),
-                                                     xp_nofault_PIOR_target));
-
-        local_irq_restore(irq_flags);
-}
-
-static inline void
-xpc_request_partition_disengage(struct xpc_partition *part)
-{
-        unsigned long irq_flags;
-        AMO_t *amo = (AMO_t *)__va(part->remote_amos_page_pa +
-                                   (XPC_DISENGAGE_REQUEST_AMO * sizeof(AMO_t)));
-
-        local_irq_save(irq_flags);
-
-        /* set bit corresponding to our partid in remote partition's AMO */
-        FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_OR,
-                         (1UL << sn_partition_id));
-        /*
-         * We must always use the nofault function regardless of whether we
-         * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
-         * didn't, we'd never know that the other partition is down and would
-         * keep sending IPIs and AMOs to it until the heartbeat times out.
-         */
-        (void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo->
-                                                               variable),
-                                                     xp_nofault_PIOR_target));
-
-        local_irq_restore(irq_flags);
-}
-
-static inline void
-xpc_cancel_partition_disengage_request(struct xpc_partition *part)
-{
-        unsigned long irq_flags;
-        AMO_t *amo = (AMO_t *)__va(part->remote_amos_page_pa +
-                                   (XPC_DISENGAGE_REQUEST_AMO * sizeof(AMO_t)));
-
-        local_irq_save(irq_flags);
-
-        /* clear bit corresponding to our partid in remote partition's AMO */
-        FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_AND,
-                         ~(1UL << sn_partition_id));
-        /*
-         * We must always use the nofault function regardless of whether we
-         * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
-         * didn't, we'd never know that the other partition is down and would
-         * keep sending IPIs and AMOs to it until the heartbeat times out.
-         */
-        (void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo->
-                                                               variable),
-                                                     xp_nofault_PIOR_target));
-
-        local_irq_restore(irq_flags);
-}
-
-static inline u64
-xpc_partition_engaged(u64 partid_mask)
-{
-        AMO_t *amo = xpc_vars->amos_page + XPC_ENGAGED_PARTITIONS_AMO;
-
-        /* return our partition's AMO variable ANDed with partid_mask */
-        return (FETCHOP_LOAD_OP(TO_AMO((u64)&amo->variable), FETCHOP_LOAD) &
-                partid_mask);
-}
-
-static inline u64
-xpc_partition_disengage_requested(u64 partid_mask)
-{
-        AMO_t *amo = xpc_vars->amos_page + XPC_DISENGAGE_REQUEST_AMO;
-
-        /* return our partition's AMO variable ANDed with partid_mask */
-        return (FETCHOP_LOAD_OP(TO_AMO((u64)&amo->variable), FETCHOP_LOAD) &
-                partid_mask);
-}
-
-static inline void
-xpc_clear_partition_engaged(u64 partid_mask)
-{
-        AMO_t *amo = xpc_vars->amos_page + XPC_ENGAGED_PARTITIONS_AMO;
-
-        /* clear bit(s) based on partid_mask in our partition's AMO */
-        FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_AND,
-                         ~partid_mask);
-}
-
-static inline void
-xpc_clear_partition_disengage_request(u64 partid_mask)
-{
-        AMO_t *amo = xpc_vars->amos_page + XPC_DISENGAGE_REQUEST_AMO;
-
-        /* clear bit(s) based on partid_mask in our partition's AMO */
-        FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_AND,
-                         ~partid_mask);
-}
-
-/*
- * The following set of macros and inlines are used for the sending and
- * receiving of IPIs (also known as IRQs). There are two flavors of IPIs,
- * one that is associated with partition activity (SGI_XPC_ACTIVATE) and
- * the other that is associated with channel activity (SGI_XPC_NOTIFY).
- */
-
-static inline u64
-xpc_IPI_receive(AMO_t *amo)
-{
-        return FETCHOP_LOAD_OP(TO_AMO((u64)&amo->variable), FETCHOP_CLEAR);
-}
-
-static inline enum xp_retval
-xpc_IPI_send(AMO_t *amo, u64 flag, int nasid, int phys_cpuid, int vector)
-{
-        int ret = 0;
-        unsigned long irq_flags;
-
-        local_irq_save(irq_flags);
-
-        FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_OR, flag);
-        sn_send_IPI_phys(nasid, phys_cpuid, vector, 0);
-
-        /*
-         * We must always use the nofault function regardless of whether we
-         * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
-         * didn't, we'd never know that the other partition is down and would
-         * keep sending IPIs and AMOs to it until the heartbeat times out.
-         */
-        ret = xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo->variable),
-                                                     xp_nofault_PIOR_target));
-
-        local_irq_restore(irq_flags);
-
-        return ((ret == 0) ? xpSuccess : xpPioReadError);
-}
-
-/*
- * IPIs associated with SGI_XPC_ACTIVATE IRQ.
- */
-
-/*
- * Flag the appropriate AMO variable and send an IPI to the specified node.
- */
-static inline void
-xpc_activate_IRQ_send(u64 amos_page_pa, int from_nasid, int to_nasid,
-                      int to_phys_cpuid)
-{
-        int w_index = XPC_NASID_W_INDEX(from_nasid);
-        int b_index = XPC_NASID_B_INDEX(from_nasid);
-        AMO_t *amos = (AMO_t *)__va(amos_page_pa +
-                                    (XPC_ACTIVATE_IRQ_AMOS * sizeof(AMO_t)));
-
-        (void)xpc_IPI_send(&amos[w_index], (1UL << b_index), to_nasid,
-                           to_phys_cpuid, SGI_XPC_ACTIVATE);
-}
-
-static inline void
-xpc_IPI_send_activate(struct xpc_vars *vars)
-{
-        xpc_activate_IRQ_send(vars->amos_page_pa, cnodeid_to_nasid(0),
-                              vars->act_nasid, vars->act_phys_cpuid);
-}
-
-static inline void
-xpc_IPI_send_activated(struct xpc_partition *part)
-{
-        xpc_activate_IRQ_send(part->remote_amos_page_pa, cnodeid_to_nasid(0),
-                              part->remote_act_nasid,
-                              part->remote_act_phys_cpuid);
-}
-
-static inline void
-xpc_IPI_send_reactivate(struct xpc_partition *part)
-{
-        xpc_activate_IRQ_send(xpc_vars->amos_page_pa, part->reactivate_nasid,
-                              xpc_vars->act_nasid, xpc_vars->act_phys_cpuid);
-}
-
-static inline void
-xpc_IPI_send_disengage(struct xpc_partition *part)
-{
-        xpc_activate_IRQ_send(part->remote_amos_page_pa, cnodeid_to_nasid(0),
-                              part->remote_act_nasid,
-                              part->remote_act_phys_cpuid);
-}
-
-/*
- * IPIs associated with SGI_XPC_NOTIFY IRQ.
- */
-
-/*
- * Send an IPI to the remote partition that is associated with the
- * specified channel.
- */
-#define XPC_NOTIFY_IRQ_SEND(_ch, _ipi_f, _irq_f) \
-                xpc_notify_IRQ_send(_ch, _ipi_f, #_ipi_f, _irq_f)
-
-static inline void
-xpc_notify_IRQ_send(struct xpc_channel *ch, u8 ipi_flag, char *ipi_flag_string,
-                    unsigned long *irq_flags)
-{
-        struct xpc_partition *part = &xpc_partitions[ch->partid];
-        enum xp_retval ret;
-
-        if (likely(part->act_state != XPC_P_DEACTIVATING)) {
-                ret = xpc_IPI_send(part->remote_IPI_amo_va,
-                                   (u64)ipi_flag << (ch->number * 8),
-                                   part->remote_IPI_nasid,
-                                   part->remote_IPI_phys_cpuid, SGI_XPC_NOTIFY);
-                dev_dbg(xpc_chan, "%s sent to partid=%d, channel=%d, ret=%d\n",
-                        ipi_flag_string, ch->partid, ch->number, ret);
-                if (unlikely(ret != xpSuccess)) {
-                        if (irq_flags != NULL)
-                                spin_unlock_irqrestore(&ch->lock, *irq_flags);
-                        XPC_DEACTIVATE_PARTITION(part, ret);
-                        if (irq_flags != NULL)
-                                spin_lock_irqsave(&ch->lock, *irq_flags);
-                }
-        }
-}
-
-/*
- * Make it look like the remote partition, which is associated with the
- * specified channel, sent us an IPI. This faked IPI will be handled
- * by xpc_dropped_IPI_check().
- */
-#define XPC_NOTIFY_IRQ_SEND_LOCAL(_ch, _ipi_f) \
-                xpc_notify_IRQ_send_local(_ch, _ipi_f, #_ipi_f)
-
-static inline void
-xpc_notify_IRQ_send_local(struct xpc_channel *ch, u8 ipi_flag,
-                          char *ipi_flag_string)
-{
-        struct xpc_partition *part = &xpc_partitions[ch->partid];
-
-        FETCHOP_STORE_OP(TO_AMO((u64)&part->local_IPI_amo_va->variable),
-                         FETCHOP_OR, ((u64)ipi_flag << (ch->number * 8)));
-        dev_dbg(xpc_chan, "%s sent local from partid=%d, channel=%d\n",
-                ipi_flag_string, ch->partid, ch->number);
-}
-
-/*
- * The sending and receiving of IPIs includes the setting of an AMO variable
- * to indicate the reason the IPI was sent. The 64-bit variable is divided
- * up into eight bytes, ordered from right to left. Byte zero pertains to
- * channel 0, byte one to channel 1, and so on. Each byte is described by
- * the following IPI flags.
- */
-
-#define XPC_IPI_CLOSEREQUEST    0x01
-#define XPC_IPI_CLOSEREPLY      0x02
-#define XPC_IPI_OPENREQUEST     0x04
-#define XPC_IPI_OPENREPLY       0x08
-#define XPC_IPI_MSGREQUEST      0x10
-
-/* given an AMO variable and a channel#, get its associated IPI flags */
-#define XPC_GET_IPI_FLAGS(_amo, _c)     ((u8) (((_amo) >> ((_c) * 8)) & 0xff))
-#define XPC_SET_IPI_FLAGS(_amo, _c, _f) (_amo) |= ((u64) (_f) << ((_c) * 8))
-
-#define XPC_ANY_OPENCLOSE_IPI_FLAGS_SET(_amo) ((_amo) & 0x0f0f0f0f0f0f0f0fUL)
-#define XPC_ANY_MSG_IPI_FLAGS_SET(_amo)       ((_amo) & 0x1010101010101010UL)
-
-static inline void
-xpc_IPI_send_closerequest(struct xpc_channel *ch, unsigned long *irq_flags)
-{
-        struct xpc_openclose_args *args = ch->local_openclose_args;
-
-        args->reason = ch->reason;
-
-        XPC_NOTIFY_IRQ_SEND(ch, XPC_IPI_CLOSEREQUEST, irq_flags);
-}
-
-static inline void
-xpc_IPI_send_closereply(struct xpc_channel *ch, unsigned long *irq_flags)
-{
-        XPC_NOTIFY_IRQ_SEND(ch, XPC_IPI_CLOSEREPLY, irq_flags);
-}
-
-static inline void
-xpc_IPI_send_openrequest(struct xpc_channel *ch, unsigned long *irq_flags)
-{
-        struct xpc_openclose_args *args = ch->local_openclose_args;
-
-        args->msg_size = ch->msg_size;
-        args->local_nentries = ch->local_nentries;
-
-        XPC_NOTIFY_IRQ_SEND(ch, XPC_IPI_OPENREQUEST, irq_flags);
-}
-
-static inline void
-xpc_IPI_send_openreply(struct xpc_channel *ch, unsigned long *irq_flags)
-{
-        struct xpc_openclose_args *args = ch->local_openclose_args;
-
-        args->remote_nentries = ch->remote_nentries;
-        args->local_nentries = ch->local_nentries;
-        args->local_msgqueue_pa = __pa(ch->local_msgqueue);
-
-        XPC_NOTIFY_IRQ_SEND(ch, XPC_IPI_OPENREPLY, irq_flags);
-}
-
-static inline void
-xpc_IPI_send_msgrequest(struct xpc_channel *ch)
-{
-        XPC_NOTIFY_IRQ_SEND(ch, XPC_IPI_MSGREQUEST, NULL);
-}
-
-static inline void
-xpc_IPI_send_local_msgrequest(struct xpc_channel *ch)
-{
-        XPC_NOTIFY_IRQ_SEND_LOCAL(ch, XPC_IPI_MSGREQUEST);
-}
-
-/*
- * Memory for XPC's AMO variables is allocated by the MSPEC driver. These
- * pages are located in the lowest granule. The lowest granule uses 4k pages
- * for cached references and an alternate TLB handler to never provide a
- * cacheable mapping for the entire region. This will prevent speculative
- * reading of cached copies of our lines from being issued which will cause
- * a PI FSB Protocol error to be generated by the SHUB. For XPC, we need 64
- * AMO variables (based on XP_MAX_PARTITIONS) for message notification and an
- * additional 128 AMO variables (based on XP_NASID_MASK_WORDS) for partition
- * activation and 2 AMO variables for partition deactivation.
- */
-static inline AMO_t *
-xpc_IPI_init(int index)
-{
-        AMO_t *amo = xpc_vars->amos_page + index;
-
-        (void)xpc_IPI_receive(amo);     /* clear AMO variable */
-        return amo;
-}
-
-static inline enum xp_retval
-xpc_map_bte_errors(bte_result_t error)
-{
-        return ((error == BTE_SUCCESS) ? xpSuccess : xpBteCopyError);
-}
-
-/*
- * Check to see if there is any channel activity to/from the specified
- * partition.
- */
-static inline void
-xpc_check_for_channel_activity(struct xpc_partition *part)
-{
-        u64 IPI_amo;
-        unsigned long irq_flags;
-
-        IPI_amo = xpc_IPI_receive(part->local_IPI_amo_va);
-        if (IPI_amo == 0)
-                return;
-
-        spin_lock_irqsave(&part->IPI_lock, irq_flags);
-        part->local_IPI_amo |= IPI_amo;
-        spin_unlock_irqrestore(&part->IPI_lock, irq_flags);
-
-        dev_dbg(xpc_chan, "received IPI from partid=%d, IPI_amo=0x%lx\n",
-                XPC_PARTID(part), IPI_amo);
-
-        xpc_wakeup_channel_mgr(part);
-}
-
 #endif /* _DRIVERS_MISC_SGIXP_XPC_H */
diff --git a/drivers/misc/sgi-xp/xpc_channel.c b/drivers/misc/sgi-xp/xpc_channel.c
index 9c90c2d55c08..9cd2ebe2a3b6 100644
--- a/drivers/misc/sgi-xp/xpc_channel.c
+++ b/drivers/misc/sgi-xp/xpc_channel.c
@@ -14,536 +14,10 @@
  *
  */
 
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/cache.h>
-#include <linux/interrupt.h>
-#include <linux/mutex.h>
-#include <linux/completion.h>
-#include <asm/sn/bte.h>
-#include <asm/sn/sn_sal.h>
+#include <linux/device.h>
 #include "xpc.h"
 
 /*
- * Guarantee that the kzalloc'd memory is cacheline aligned.
- */
-static void *
-xpc_kzalloc_cacheline_aligned(size_t size, gfp_t flags, void **base)
-{
-        /* see if kzalloc will give us cachline aligned memory by default */
-        *base = kzalloc(size, flags);
-        if (*base == NULL)
-                return NULL;
-
-        if ((u64)*base == L1_CACHE_ALIGN((u64)*base))
-                return *base;
-
-        kfree(*base);
-
-        /* nope, we'll have to do it ourselves */
-        *base = kzalloc(size + L1_CACHE_BYTES, flags);
-        if (*base == NULL)
-                return NULL;
-
-        return (void *)L1_CACHE_ALIGN((u64)*base);
-}
-
-/*
- * Set up the initial values for the XPartition Communication channels.
- */
-static void
-xpc_initialize_channels(struct xpc_partition *part, short partid)
-{
-        int ch_number;
-        struct xpc_channel *ch;
-
-        for (ch_number = 0; ch_number < part->nchannels; ch_number++) {
-                ch = &part->channels[ch_number];
-
-                ch->partid = partid;
-                ch->number = ch_number;
-                ch->flags = XPC_C_DISCONNECTED;
-
-                ch->local_GP = &part->local_GPs[ch_number];
-                ch->local_openclose_args =
-                    &part->local_openclose_args[ch_number];
-
-                atomic_set(&ch->kthreads_assigned, 0);
-                atomic_set(&ch->kthreads_idle, 0);
-                atomic_set(&ch->kthreads_active, 0);
-
-                atomic_set(&ch->references, 0);
-                atomic_set(&ch->n_to_notify, 0);
-
-                spin_lock_init(&ch->lock);
-                mutex_init(&ch->msg_to_pull_mutex);
-                init_completion(&ch->wdisconnect_wait);
-
-                atomic_set(&ch->n_on_msg_allocate_wq, 0);
-                init_waitqueue_head(&ch->msg_allocate_wq);
-                init_waitqueue_head(&ch->idle_wq);
-        }
-}
-
-/*
- * Setup the infrastructure necessary to support XPartition Communication
- * between the specified remote partition and the local one.
- */
-enum xp_retval
-xpc_setup_infrastructure(struct xpc_partition *part)
-{
-        int ret, cpuid;
-        struct timer_list *timer;
-        short partid = XPC_PARTID(part);
-
-        /*
-         * Zero out MOST of the entry for this partition. Only the fields
-         * starting with `nchannels' will be zeroed. The preceding fields must
-         * remain `viable' across partition ups and downs, since they may be
-         * referenced during this memset() operation.
-         */
-        memset(&part->nchannels, 0, sizeof(struct xpc_partition) -
-               offsetof(struct xpc_partition, nchannels));
-
-        /*
-         * Allocate all of the channel structures as a contiguous chunk of
-         * memory.
-         */
-        part->channels = kzalloc(sizeof(struct xpc_channel) * XPC_NCHANNELS,
-                                 GFP_KERNEL);
-        if (part->channels == NULL) {
-                dev_err(xpc_chan, "can't get memory for channels\n");
-                return xpNoMemory;
-        }
-
-        part->nchannels = XPC_NCHANNELS;
-
-        /* allocate all the required GET/PUT values */
-
-        part->local_GPs = xpc_kzalloc_cacheline_aligned(XPC_GP_SIZE,
-                                                        GFP_KERNEL,
-                                                        &part->local_GPs_base);
-        if (part->local_GPs == NULL) {
-                kfree(part->channels);
-                part->channels = NULL;
-                dev_err(xpc_chan, "can't get memory for local get/put "
-                        "values\n");
-                return xpNoMemory;
-        }
-
-        part->remote_GPs = xpc_kzalloc_cacheline_aligned(XPC_GP_SIZE,
-                                                         GFP_KERNEL,
-                                                         &part->
-                                                         remote_GPs_base);
-        if (part->remote_GPs == NULL) {
-                dev_err(xpc_chan, "can't get memory for remote get/put "
-                        "values\n");
-                kfree(part->local_GPs_base);
-                part->local_GPs = NULL;
-                kfree(part->channels);
-                part->channels = NULL;
-                return xpNoMemory;
-        }
-
-        /* allocate all the required open and close args */
-
-        part->local_openclose_args =
-            xpc_kzalloc_cacheline_aligned(XPC_OPENCLOSE_ARGS_SIZE, GFP_KERNEL,
-                                          &part->local_openclose_args_base);
-        if (part->local_openclose_args == NULL) {
-                dev_err(xpc_chan, "can't get memory for local connect args\n");
-                kfree(part->remote_GPs_base);
-                part->remote_GPs = NULL;
-                kfree(part->local_GPs_base);
-                part->local_GPs = NULL;
-                kfree(part->channels);
-                part->channels = NULL;
-                return xpNoMemory;
-        }
-
-        part->remote_openclose_args =
-            xpc_kzalloc_cacheline_aligned(XPC_OPENCLOSE_ARGS_SIZE, GFP_KERNEL,
-                                          &part->remote_openclose_args_base);
-        if (part->remote_openclose_args == NULL) {
-                dev_err(xpc_chan, "can't get memory for remote connect args\n");
-                kfree(part->local_openclose_args_base);
-                part->local_openclose_args = NULL;
-                kfree(part->remote_GPs_base);
-                part->remote_GPs = NULL;
-                kfree(part->local_GPs_base);
-                part->local_GPs = NULL;
-                kfree(part->channels);
-                part->channels = NULL;
-                return xpNoMemory;
-        }
-
-        xpc_initialize_channels(part, partid);
-
-        atomic_set(&part->nchannels_active, 0);
-        atomic_set(&part->nchannels_engaged, 0);
-
-        /* local_IPI_amo were set to 0 by an earlier memset() */
-
-        /* Initialize this partitions AMO_t structure */
-        part->local_IPI_amo_va = xpc_IPI_init(partid);
-
-        spin_lock_init(&part->IPI_lock);
-
-        atomic_set(&part->channel_mgr_requests, 1);
-        init_waitqueue_head(&part->channel_mgr_wq);
-
-        sprintf(part->IPI_owner, "xpc%02d", partid);
-        ret = request_irq(SGI_XPC_NOTIFY, xpc_notify_IRQ_handler, IRQF_SHARED,
-                          part->IPI_owner, (void *)(u64)partid);
-        if (ret != 0) {
-                dev_err(xpc_chan, "can't register NOTIFY IRQ handler, "
-                        "errno=%d\n", -ret);
-                kfree(part->remote_openclose_args_base);
-                part->remote_openclose_args = NULL;
-                kfree(part->local_openclose_args_base);
-                part->local_openclose_args = NULL;
-                kfree(part->remote_GPs_base);
-                part->remote_GPs = NULL;
-                kfree(part->local_GPs_base);
-                part->local_GPs = NULL;
-                kfree(part->channels);
-                part->channels = NULL;
-                return xpLackOfResources;
-        }
-
-        /* Setup a timer to check for dropped IPIs */
-        timer = &part->dropped_IPI_timer;
-        init_timer(timer);
-        timer->function = (void (*)(unsigned long))xpc_dropped_IPI_check;
-        timer->data = (unsigned long)part;
-        timer->expires = jiffies + XPC_P_DROPPED_IPI_WAIT;
-        add_timer(timer);
-
-        /*
-         * With the setting of the partition setup_state to XPC_P_SETUP, we're
-         * declaring that this partition is ready to go.
-         */
-        part->setup_state = XPC_P_SETUP;
-
-        /*
-         * Setup the per partition specific variables required by the
-         * remote partition to establish channel connections with us.
-         *
-         * The setting of the magic # indicates that these per partition
-         * specific variables are ready to be used.
-         */
-        xpc_vars_part[partid].GPs_pa = __pa(part->local_GPs);
-        xpc_vars_part[partid].openclose_args_pa =
-            __pa(part->local_openclose_args);
-        xpc_vars_part[partid].IPI_amo_pa = __pa(part->local_IPI_amo_va);
-        cpuid = raw_smp_processor_id(); /* any CPU in this partition will do */
-        xpc_vars_part[partid].IPI_nasid = cpuid_to_nasid(cpuid);
-        xpc_vars_part[partid].IPI_phys_cpuid = cpu_physical_id(cpuid);
-        xpc_vars_part[partid].nchannels = part->nchannels;
-        xpc_vars_part[partid].magic = XPC_VP_MAGIC1;
-
-        return xpSuccess;
-}
-
-/*
- * Create a wrapper that hides the underlying mechanism for pulling a cacheline
- * (or multiple cachelines) from a remote partition.
- *
- * src must be a cacheline aligned physical address on the remote partition.
- * dst must be a cacheline aligned virtual address on this partition.
- * cnt must be an cacheline sized
- */
-static enum xp_retval
-xpc_pull_remote_cachelines(struct xpc_partition *part, void *dst,
-                           const void *src, size_t cnt)
-{
-        bte_result_t bte_ret;
-
-        DBUG_ON((u64)src != L1_CACHE_ALIGN((u64)src));
-        DBUG_ON((u64)dst != L1_CACHE_ALIGN((u64)dst));
-        DBUG_ON(cnt != L1_CACHE_ALIGN(cnt));
-
-        if (part->act_state == XPC_P_DEACTIVATING)
-                return part->reason;
-
-        bte_ret = xp_bte_copy((u64)src, (u64)dst, (u64)cnt,
-                              (BTE_NORMAL | BTE_WACQUIRE), NULL);
-        if (bte_ret == BTE_SUCCESS)
-                return xpSuccess;
-
-        dev_dbg(xpc_chan, "xp_bte_copy() from partition %d failed, ret=%d\n",
-                XPC_PARTID(part), bte_ret);
-
-        return xpc_map_bte_errors(bte_ret);
-}
-
-/*
- * Pull the remote per partition specific variables from the specified
- * partition.
- */
-enum xp_retval
-xpc_pull_remote_vars_part(struct xpc_partition *part)
-{
-        u8 buffer[L1_CACHE_BYTES * 2];
-        struct xpc_vars_part *pulled_entry_cacheline =
-            (struct xpc_vars_part *)L1_CACHE_ALIGN((u64)buffer);
-        struct xpc_vars_part *pulled_entry;
-        u64 remote_entry_cacheline_pa, remote_entry_pa;
-        short partid = XPC_PARTID(part);
-        enum xp_retval ret;
-
-        /* pull the cacheline that contains the variables we're interested in */
-
-        DBUG_ON(part->remote_vars_part_pa !=
-                L1_CACHE_ALIGN(part->remote_vars_part_pa));
-        DBUG_ON(sizeof(struct xpc_vars_part) != L1_CACHE_BYTES / 2);
-
-        remote_entry_pa = part->remote_vars_part_pa +
-            sn_partition_id * sizeof(struct xpc_vars_part);
-
-        remote_entry_cacheline_pa = (remote_entry_pa & ~(L1_CACHE_BYTES - 1));
-
-        pulled_entry = (struct xpc_vars_part *)((u64)pulled_entry_cacheline +
-                                                (remote_entry_pa &
-                                                 (L1_CACHE_BYTES - 1)));
-
-        ret = xpc_pull_remote_cachelines(part, pulled_entry_cacheline,
-                                         (void *)remote_entry_cacheline_pa,
-                                         L1_CACHE_BYTES);
-        if (ret != xpSuccess) {
-                dev_dbg(xpc_chan, "failed to pull XPC vars_part from "
-                        "partition %d, ret=%d\n", partid, ret);
-                return ret;
-        }
-
-        /* see if they've been set up yet */
-
-        if (pulled_entry->magic != XPC_VP_MAGIC1 &&
-            pulled_entry->magic != XPC_VP_MAGIC2) {
-
-                if (pulled_entry->magic != 0) {
-                        dev_dbg(xpc_chan, "partition %d's XPC vars_part for "
-                                "partition %d has bad magic value (=0x%lx)\n",
-                                partid, sn_partition_id, pulled_entry->magic);
-                        return xpBadMagic;
-                }
-
-                /* they've not been initialized yet */
-                return xpRetry;
-        }
-
-        if (xpc_vars_part[partid].magic == XPC_VP_MAGIC1) {
-
-                /* validate the variables */
-
-                if (pulled_entry->GPs_pa == 0 ||
-                    pulled_entry->openclose_args_pa == 0 ||
-                    pulled_entry->IPI_amo_pa == 0) {
-
-                        dev_err(xpc_chan, "partition %d's XPC vars_part for "
-                                "partition %d are not valid\n", partid,
-                                sn_partition_id);
-                        return xpInvalidAddress;
-                }
-
-                /* the variables we imported look to be valid */
-
-                part->remote_GPs_pa = pulled_entry->GPs_pa;
-                part->remote_openclose_args_pa =
-                    pulled_entry->openclose_args_pa;
-                part->remote_IPI_amo_va =
-                    (AMO_t *)__va(pulled_entry->IPI_amo_pa);
-                part->remote_IPI_nasid = pulled_entry->IPI_nasid;
-                part->remote_IPI_phys_cpuid = pulled_entry->IPI_phys_cpuid;
-
-                if (part->nchannels > pulled_entry->nchannels)
-                        part->nchannels = pulled_entry->nchannels;
-
-                /* let the other side know that we've pulled their variables */
-
-                xpc_vars_part[partid].magic = XPC_VP_MAGIC2;
-        }
-
-        if (pulled_entry->magic == XPC_VP_MAGIC1)
-                return xpRetry;
-
-        return xpSuccess;
-}
-
-/*
- * Get the IPI flags and pull the openclose args and/or remote GPs as needed.
- */
-static u64
-xpc_get_IPI_flags(struct xpc_partition *part)
-{
-        unsigned long irq_flags;
-        u64 IPI_amo;
-        enum xp_retval ret;
-
-        /*
-         * See if there are any IPI flags to be handled.
-         */
-
-        spin_lock_irqsave(&part->IPI_lock, irq_flags);
-        IPI_amo = part->local_IPI_amo;
-        if (IPI_amo != 0)
-                part->local_IPI_amo = 0;
-
-        spin_unlock_irqrestore(&part->IPI_lock, irq_flags);
-
-        if (XPC_ANY_OPENCLOSE_IPI_FLAGS_SET(IPI_amo)) {
-                ret = xpc_pull_remote_cachelines(part,
-                                                 part->remote_openclose_args,
-                                                 (void *)part->
-                                                 remote_openclose_args_pa,
-                                                 XPC_OPENCLOSE_ARGS_SIZE);
-                if (ret != xpSuccess) {
-                        XPC_DEACTIVATE_PARTITION(part, ret);
-
-                        dev_dbg(xpc_chan, "failed to pull openclose args from "
-                                "partition %d, ret=%d\n", XPC_PARTID(part),
-                                ret);
-
-                        /* don't bother processing IPIs anymore */
-                        IPI_amo = 0;
-                }
-        }
-
-        if (XPC_ANY_MSG_IPI_FLAGS_SET(IPI_amo)) {
-                ret = xpc_pull_remote_cachelines(part, part->remote_GPs,
-                                                 (void *)part->remote_GPs_pa,
-                                                 XPC_GP_SIZE);
-                if (ret != xpSuccess) {
-                        XPC_DEACTIVATE_PARTITION(part, ret);
-
-                        dev_dbg(xpc_chan, "failed to pull GPs from partition "
-                                "%d, ret=%d\n", XPC_PARTID(part), ret);
-
-                        /* don't bother processing IPIs anymore */
-                        IPI_amo = 0;
-                }
-        }
-
-        return IPI_amo;
-}
-
-/*
- * Allocate the local message queue and the notify queue.
- */
-static enum xp_retval
-xpc_allocate_local_msgqueue(struct xpc_channel *ch)
-{
-        unsigned long irq_flags;
-        int nentries;
-        size_t nbytes;
-
-        for (nentries = ch->local_nentries; nentries > 0; nentries--) {
-
-                nbytes = nentries * ch->msg_size;
-                ch->local_msgqueue = xpc_kzalloc_cacheline_aligned(nbytes,
-                                                                   GFP_KERNEL,
-                                                      &ch->local_msgqueue_base);
-                if (ch->local_msgqueue == NULL)
-                        continue;
-
-                nbytes = nentries * sizeof(struct xpc_notify);
-                ch->notify_queue = kzalloc(nbytes, GFP_KERNEL);
-                if (ch->notify_queue == NULL) {
-                        kfree(ch->local_msgqueue_base);
-                        ch->local_msgqueue = NULL;
-                        continue;
-                }
-
-                spin_lock_irqsave(&ch->lock, irq_flags);
-                if (nentries < ch->local_nentries) {
-                        dev_dbg(xpc_chan, "nentries=%d local_nentries=%d, "
-                                "partid=%d, channel=%d\n", nentries,
-                                ch->local_nentries, ch->partid, ch->number);
-
-                        ch->local_nentries = nentries;
-                }
-                spin_unlock_irqrestore(&ch->lock, irq_flags);
-                return xpSuccess;
-        }
-
-        dev_dbg(xpc_chan, "can't get memory for local message queue and notify "
-                "queue, partid=%d, channel=%d\n", ch->partid, ch->number);
-        return xpNoMemory;
-}
-
-/*
- * Allocate the cached remote message queue.
- */
-static enum xp_retval
-xpc_allocate_remote_msgqueue(struct xpc_channel *ch)
-{
-        unsigned long irq_flags;
-        int nentries;
-        size_t nbytes;
-
-        DBUG_ON(ch->remote_nentries <= 0);
-
-        for (nentries = ch->remote_nentries; nentries > 0; nentries--) {
-
-                nbytes = nentries * ch->msg_size;
-                ch->remote_msgqueue = xpc_kzalloc_cacheline_aligned(nbytes,
-                                                                    GFP_KERNEL,
-                                                     &ch->remote_msgqueue_base);
-                if (ch->remote_msgqueue == NULL)
-                        continue;
-
-                spin_lock_irqsave(&ch->lock, irq_flags);
-                if (nentries < ch->remote_nentries) {
-                        dev_dbg(xpc_chan, "nentries=%d remote_nentries=%d, "
-                                "partid=%d, channel=%d\n", nentries,
-                                ch->remote_nentries, ch->partid, ch->number);
-
-                        ch->remote_nentries = nentries;
-                }
-                spin_unlock_irqrestore(&ch->lock, irq_flags);
-                return xpSuccess;
-        }
-
-        dev_dbg(xpc_chan, "can't get memory for cached remote message queue, "
-                "partid=%d, channel=%d\n", ch->partid, ch->number);
-        return xpNoMemory;
-}
-
-/*
- * Allocate message queues and other stuff associated with a channel.
- *
- * Note: Assumes all of the channel sizes are filled in.
- */
-static enum xp_retval
-xpc_allocate_msgqueues(struct xpc_channel *ch)
-{
-        unsigned long irq_flags;
-        enum xp_retval ret;
-
-        DBUG_ON(ch->flags & XPC_C_SETUP);
-
-        ret = xpc_allocate_local_msgqueue(ch);
-        if (ret != xpSuccess)
-                return ret;
-
-        ret = xpc_allocate_remote_msgqueue(ch);
-        if (ret != xpSuccess) {
-                kfree(ch->local_msgqueue_base);
-                ch->local_msgqueue = NULL;
-                kfree(ch->notify_queue);
-                ch->notify_queue = NULL;
-                return ret;
-        }
-
-        spin_lock_irqsave(&ch->lock, irq_flags);
-        ch->flags |= XPC_C_SETUP;
-        spin_unlock_irqrestore(&ch->lock, irq_flags);
-
-        return xpSuccess;
-}
-
-/*
  * Process a connect message from a remote partition.
  *
  * Note: xpc_process_connect() is expecting to be called with the
@@ -565,30 +39,29 @@ xpc_process_connect(struct xpc_channel *ch, unsigned long *irq_flags)
 
         if (!(ch->flags & XPC_C_SETUP)) {
                 spin_unlock_irqrestore(&ch->lock, *irq_flags);
-                ret = xpc_allocate_msgqueues(ch);
+                ret = xpc_setup_msg_structures(ch);
                 spin_lock_irqsave(&ch->lock, *irq_flags);
 
                 if (ret != xpSuccess)
                         XPC_DISCONNECT_CHANNEL(ch, ret, irq_flags);
 
+                ch->flags |= XPC_C_SETUP;
+
                 if (ch->flags & (XPC_C_CONNECTED | XPC_C_DISCONNECTING))
                         return;
 
-                DBUG_ON(!(ch->flags & XPC_C_SETUP));
                 DBUG_ON(ch->local_msgqueue == NULL);
                 DBUG_ON(ch->remote_msgqueue == NULL);
         }
 
         if (!(ch->flags & XPC_C_OPENREPLY)) {
                 ch->flags |= XPC_C_OPENREPLY;
-                xpc_IPI_send_openreply(ch, irq_flags);
+                xpc_send_chctl_openreply(ch, irq_flags);
         }
 
         if (!(ch->flags & XPC_C_ROPENREPLY))
                 return;
 
-        DBUG_ON(ch->remote_msgqueue_pa == 0);
-
         ch->flags = (XPC_C_CONNECTED | XPC_C_SETUP);    /* clear all else */
 
         dev_info(xpc_chan, "channel %d to partition %d connected\n",
@@ -600,99 +73,6 @@ xpc_process_connect(struct xpc_channel *ch, unsigned long *irq_flags)
 }
 
 /*
- * Notify those who wanted to be notified upon delivery of their message.
- */
-static void
-xpc_notify_senders(struct xpc_channel *ch, enum xp_retval reason, s64 put)
-{
-        struct xpc_notify *notify;
-        u8 notify_type;
-        s64 get = ch->w_remote_GP.get - 1;
-
-        while (++get < put && atomic_read(&ch->n_to_notify) > 0) {
-
-                notify = &ch->notify_queue[get % ch->local_nentries];
-
-                /*
-                 * See if the notify entry indicates it was associated with
-                 * a message who's sender wants to be notified. It is possible
-                 * that it is, but someone else is doing or has done the
-                 * notification.
-                 */
-                notify_type = notify->type;
-                if (notify_type == 0 ||
-                    cmpxchg(&notify->type, notify_type, 0) != notify_type) {
-                        continue;
-                }
-
-                DBUG_ON(notify_type != XPC_N_CALL);
-
-                atomic_dec(&ch->n_to_notify);
-
-                if (notify->func != NULL) {
-                        dev_dbg(xpc_chan, "notify->func() called, notify=0x%p, "
-                                "msg_number=%ld, partid=%d, channel=%d\n",
-                                (void *)notify, get, ch->partid, ch->number);
-
-                        notify->func(reason, ch->partid, ch->number,
-                                     notify->key);
-
-                        dev_dbg(xpc_chan, "notify->func() returned, "
-                                "notify=0x%p, msg_number=%ld, partid=%d, "
-                                "channel=%d\n", (void *)notify, get,
-                                ch->partid, ch->number);
-                }
-        }
-}
-
-/*
- * Free up message queues and other stuff that were allocated for the specified
- * channel.
- *
- * Note: ch->reason and ch->reason_line are left set for debugging purposes,
- * they're cleared when XPC_C_DISCONNECTED is cleared.
- */
-static void
-xpc_free_msgqueues(struct xpc_channel *ch)
-{
-        DBUG_ON(!spin_is_locked(&ch->lock));
-        DBUG_ON(atomic_read(&ch->n_to_notify) != 0);
-
-        ch->remote_msgqueue_pa = 0;
-        ch->func = NULL;
-        ch->key = NULL;
-        ch->msg_size = 0;
-        ch->local_nentries = 0;
-        ch->remote_nentries = 0;
-        ch->kthreads_assigned_limit = 0;
-        ch->kthreads_idle_limit = 0;
-
-        ch->local_GP->get = 0;
-        ch->local_GP->put = 0;
-        ch->remote_GP.get = 0;
-        ch->remote_GP.put = 0;
-        ch->w_local_GP.get = 0;
-        ch->w_local_GP.put = 0;
-        ch->w_remote_GP.get = 0;
-        ch->w_remote_GP.put = 0;
-        ch->next_msg_to_pull = 0;
-
-        if (ch->flags & XPC_C_SETUP) {
-                ch->flags &= ~XPC_C_SETUP;
-
-                dev_dbg(xpc_chan, "ch->flags=0x%x, partid=%d, channel=%d\n",
-                        ch->flags, ch->partid, ch->number);
-
-                kfree(ch->local_msgqueue_base);
-                ch->local_msgqueue = NULL;
-                kfree(ch->remote_msgqueue_base);
-                ch->remote_msgqueue = NULL;
-                kfree(ch->notify_queue);
-                ch->notify_queue = NULL;
-        }
-}
-
-/*
  * spin_lock_irqsave() is expected to be held on entry.
  */
 static void
@@ -717,9 +97,9 @@ xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags)
         DBUG_ON((ch->flags & XPC_C_CONNECTEDCALLOUT_MADE) &&
                 !(ch->flags & XPC_C_DISCONNECTINGCALLOUT_MADE));
 
-        if (part->act_state == XPC_P_DEACTIVATING) {
+        if (part->act_state == XPC_P_AS_DEACTIVATING) {
                 /* can't proceed until the other side disengages from us */
-                if (xpc_partition_engaged(1UL << ch->partid))
+                if (xpc_partition_engaged(ch->partid))
                         return;
 
         } else {
@@ -731,7 +111,7 @@ xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags)
 
                 if (!(ch->flags & XPC_C_CLOSEREPLY)) {
                         ch->flags |= XPC_C_CLOSEREPLY;
-                        xpc_IPI_send_closereply(ch, irq_flags);
+                        xpc_send_chctl_closereply(ch, irq_flags);
                 }
 
                 if (!(ch->flags & XPC_C_RCLOSEREPLY))
@@ -740,8 +120,8 @@ xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags)
 
         /* wake those waiting for notify completion */
         if (atomic_read(&ch->n_to_notify) > 0) {
-                /* >>> we do callout while holding ch->lock */
-                xpc_notify_senders(ch, ch->reason, ch->w_local_GP.put);
+                /* we do callout while holding ch->lock, callout can't block */
+                xpc_notify_senders_of_disconnect(ch);
         }
 
         /* both sides are disconnected now */
@@ -752,10 +132,24 @@ xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags)
                 spin_lock_irqsave(&ch->lock, *irq_flags);
         }
 
+        DBUG_ON(atomic_read(&ch->n_to_notify) != 0);
+
         /* it's now safe to free the channel's message queues */
-        xpc_free_msgqueues(ch);
+        xpc_teardown_msg_structures(ch);
 
-        /* mark disconnected, clear all other flags except XPC_C_WDISCONNECT */
+        ch->func = NULL;
+        ch->key = NULL;
+        ch->entry_size = 0;
+        ch->local_nentries = 0;
+        ch->remote_nentries = 0;
+        ch->kthreads_assigned_limit = 0;
+        ch->kthreads_idle_limit = 0;
+
+        /*
+         * Mark the channel disconnected and clear all other flags, including
+         * XPC_C_SETUP (because of call to xpc_teardown_msg_structures()) but
+         * not including XPC_C_WDISCONNECT (if it was set).
+         */
         ch->flags = (XPC_C_DISCONNECTED | (ch->flags & XPC_C_WDISCONNECT));
 
         atomic_dec(&part->nchannels_active);
@@ -768,15 +162,15 @@ xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags)
         if (ch->flags & XPC_C_WDISCONNECT) {
                 /* we won't lose the CPU since we're holding ch->lock */
                 complete(&ch->wdisconnect_wait);
-        } else if (ch->delayed_IPI_flags) {
-                if (part->act_state != XPC_P_DEACTIVATING) {
-                        /* time to take action on any delayed IPI flags */
-                        spin_lock(&part->IPI_lock);
-                        XPC_SET_IPI_FLAGS(part->local_IPI_amo, ch->number,
-                                          ch->delayed_IPI_flags);
-                        spin_unlock(&part->IPI_lock);
+        } else if (ch->delayed_chctl_flags) {
+                if (part->act_state != XPC_P_AS_DEACTIVATING) {
+                        /* time to take action on any delayed chctl flags */
+                        spin_lock(&part->chctl_lock);
+                        part->chctl.flags[ch->number] |=
+                            ch->delayed_chctl_flags;
+                        spin_unlock(&part->chctl_lock);
                 }
-                ch->delayed_IPI_flags = 0;
+                ch->delayed_chctl_flags = 0;
         }
 }
 
@@ -784,8 +178,8 @@ xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags)
  * Process a change in the channel's remote connection state.
  */
 static void
-xpc_process_openclose_IPI(struct xpc_partition *part, int ch_number,
-                          u8 IPI_flags)
+xpc_process_openclose_chctl_flags(struct xpc_partition *part, int ch_number,
+                                  u8 chctl_flags)
 {
         unsigned long irq_flags;
         struct xpc_openclose_args *args =
@@ -800,24 +194,24 @@ again:
         if ((ch->flags & XPC_C_DISCONNECTED) &&
             (ch->flags & XPC_C_WDISCONNECT)) {
                 /*
-                 * Delay processing IPI flags until thread waiting disconnect
+                 * Delay processing chctl flags until thread waiting disconnect
                  * has had a chance to see that the channel is disconnected.
                  */
-                ch->delayed_IPI_flags |= IPI_flags;
+                ch->delayed_chctl_flags |= chctl_flags;
                 spin_unlock_irqrestore(&ch->lock, irq_flags);
                 return;
         }
 
-        if (IPI_flags & XPC_IPI_CLOSEREQUEST) {
+        if (chctl_flags & XPC_CHCTL_CLOSEREQUEST) {
 
-                dev_dbg(xpc_chan, "XPC_IPI_CLOSEREQUEST (reason=%d) received "
+                dev_dbg(xpc_chan, "XPC_CHCTL_CLOSEREQUEST (reason=%d) received "
                         "from partid=%d, channel=%d\n", args->reason,
                         ch->partid, ch->number);
 
                 /*
                  * If RCLOSEREQUEST is set, we're probably waiting for
                  * RCLOSEREPLY. We should find it and a ROPENREQUEST packed
-                 * with this RCLOSEREQUEST in the IPI_flags.
+                 * with this RCLOSEREQUEST in the chctl_flags.
                  */
 
                 if (ch->flags & XPC_C_RCLOSEREQUEST) {
@@ -826,8 +220,8 @@ again:
                         DBUG_ON(!(ch->flags & XPC_C_CLOSEREPLY));
                         DBUG_ON(ch->flags & XPC_C_RCLOSEREPLY);
 
-                        DBUG_ON(!(IPI_flags & XPC_IPI_CLOSEREPLY));
-                        IPI_flags &= ~XPC_IPI_CLOSEREPLY;
+                        DBUG_ON(!(chctl_flags & XPC_CHCTL_CLOSEREPLY));
+                        chctl_flags &= ~XPC_CHCTL_CLOSEREPLY;
                         ch->flags |= XPC_C_RCLOSEREPLY;
 
                         /* both sides have finished disconnecting */
@@ -837,17 +231,15 @@ again:
                 }
 
                 if (ch->flags & XPC_C_DISCONNECTED) {
-                        if (!(IPI_flags & XPC_IPI_OPENREQUEST)) {
-                                if ((XPC_GET_IPI_FLAGS(part->local_IPI_amo,
-                                                       ch_number) &
-                                     XPC_IPI_OPENREQUEST)) {
-
-                                        DBUG_ON(ch->delayed_IPI_flags != 0);
-                                        spin_lock(&part->IPI_lock);
-                                        XPC_SET_IPI_FLAGS(part->local_IPI_amo,
-                                                          ch_number,
-                                                          XPC_IPI_CLOSEREQUEST);
-                                        spin_unlock(&part->IPI_lock);
+                        if (!(chctl_flags & XPC_CHCTL_OPENREQUEST)) {
+                                if (part->chctl.flags[ch_number] &
+                                    XPC_CHCTL_OPENREQUEST) {
+
+                                        DBUG_ON(ch->delayed_chctl_flags != 0);
+                                        spin_lock(&part->chctl_lock);
+                                        part->chctl.flags[ch_number] |=
+                                            XPC_CHCTL_CLOSEREQUEST;
+                                        spin_unlock(&part->chctl_lock);
                                 }
                                 spin_unlock_irqrestore(&ch->lock, irq_flags);
                                 return;
@@ -860,7 +252,7 @@ again:
                         ch->flags |= (XPC_C_CONNECTING | XPC_C_ROPENREQUEST);
                 }
 
-                IPI_flags &= ~(XPC_IPI_OPENREQUEST | XPC_IPI_OPENREPLY);
+                chctl_flags &= ~(XPC_CHCTL_OPENREQUEST | XPC_CHCTL_OPENREPLY);
 
                 /*
                  * The meaningful CLOSEREQUEST connection state fields are:
@@ -878,7 +270,7 @@ again:
 
                         XPC_DISCONNECT_CHANNEL(ch, reason, &irq_flags);
 
-                        DBUG_ON(IPI_flags & XPC_IPI_CLOSEREPLY);
+                        DBUG_ON(chctl_flags & XPC_CHCTL_CLOSEREPLY);
                         spin_unlock_irqrestore(&ch->lock, irq_flags);
                         return;
                 }
@@ -886,13 +278,13 @@ again:
                 xpc_process_disconnect(ch, &irq_flags);
         }
 
-        if (IPI_flags & XPC_IPI_CLOSEREPLY) {
+        if (chctl_flags & XPC_CHCTL_CLOSEREPLY) {
 
-                dev_dbg(xpc_chan, "XPC_IPI_CLOSEREPLY received from partid=%d,"
-                        " channel=%d\n", ch->partid, ch->number);
+                dev_dbg(xpc_chan, "XPC_CHCTL_CLOSEREPLY received from partid="
+                        "%d, channel=%d\n", ch->partid, ch->number);
 
                 if (ch->flags & XPC_C_DISCONNECTED) {
-                        DBUG_ON(part->act_state != XPC_P_DEACTIVATING);
+                        DBUG_ON(part->act_state != XPC_P_AS_DEACTIVATING);
                         spin_unlock_irqrestore(&ch->lock, irq_flags);
                         return;
                 }
@@ -900,15 +292,14 @@ again:
                 DBUG_ON(!(ch->flags & XPC_C_CLOSEREQUEST));
 
                 if (!(ch->flags & XPC_C_RCLOSEREQUEST)) {
-                        if ((XPC_GET_IPI_FLAGS(part->local_IPI_amo, ch_number)
-                             & XPC_IPI_CLOSEREQUEST)) {
-
-                                DBUG_ON(ch->delayed_IPI_flags != 0);
-                                spin_lock(&part->IPI_lock);
-                                XPC_SET_IPI_FLAGS(part->local_IPI_amo,
-                                                  ch_number,
-                                                  XPC_IPI_CLOSEREPLY);
-                                spin_unlock(&part->IPI_lock);
+                        if (part->chctl.flags[ch_number] &
+                            XPC_CHCTL_CLOSEREQUEST) {
+
+                                DBUG_ON(ch->delayed_chctl_flags != 0);
+                                spin_lock(&part->chctl_lock);
+                                part->chctl.flags[ch_number] |=
+                                    XPC_CHCTL_CLOSEREPLY;
+                                spin_unlock(&part->chctl_lock);
                         }
                         spin_unlock_irqrestore(&ch->lock, irq_flags);
                         return;
@@ -922,21 +313,21 @@ again:
                 }
         }
 
-        if (IPI_flags & XPC_IPI_OPENREQUEST) {
+        if (chctl_flags & XPC_CHCTL_OPENREQUEST) {
 
-                dev_dbg(xpc_chan, "XPC_IPI_OPENREQUEST (msg_size=%d, "
+                dev_dbg(xpc_chan, "XPC_CHCTL_OPENREQUEST (entry_size=%d, "
                         "local_nentries=%d) received from partid=%d, "
-                        "channel=%d\n", args->msg_size, args->local_nentries,
+                        "channel=%d\n", args->entry_size, args->local_nentries,
                         ch->partid, ch->number);
 
-                if (part->act_state == XPC_P_DEACTIVATING ||
+                if (part->act_state == XPC_P_AS_DEACTIVATING ||
                     (ch->flags & XPC_C_ROPENREQUEST)) {
                         spin_unlock_irqrestore(&ch->lock, irq_flags);
                         return;
                 }
 
                 if (ch->flags & (XPC_C_DISCONNECTING | XPC_C_WDISCONNECT)) {
-                        ch->delayed_IPI_flags |= XPC_IPI_OPENREQUEST;
+                        ch->delayed_chctl_flags |= XPC_CHCTL_OPENREQUEST;
                         spin_unlock_irqrestore(&ch->lock, irq_flags);
                         return;
                 }
@@ -947,10 +338,10 @@ again:
 
                 /*
                  * The meaningful OPENREQUEST connection state fields are:
-                 *      msg_size = size of channel's messages in bytes
+                 *      entry_size = size of channel's messages in bytes
                  *      local_nentries = remote partition's local_nentries
                  */
-                if (args->msg_size == 0 || args->local_nentries == 0) {
+                if (args->entry_size == 0 || args->local_nentries == 0) {
                         /* assume OPENREQUEST was delayed by mistake */
                         spin_unlock_irqrestore(&ch->lock, irq_flags);
                         return;
@@ -960,14 +351,14 @@ again:
                 ch->remote_nentries = args->local_nentries;
 
                 if (ch->flags & XPC_C_OPENREQUEST) {
-                        if (args->msg_size != ch->msg_size) {
+                        if (args->entry_size != ch->entry_size) {
                                 XPC_DISCONNECT_CHANNEL(ch, xpUnequalMsgSizes,
                                                        &irq_flags);
                                 spin_unlock_irqrestore(&ch->lock, irq_flags);
                                 return;
                         }
                 } else {
-                        ch->msg_size = args->msg_size;
+                        ch->entry_size = args->entry_size;
 
                         XPC_SET_REASON(ch, 0, 0);
                         ch->flags &= ~XPC_C_DISCONNECTED;
@@ -978,13 +369,13 @@ again:
                 xpc_process_connect(ch, &irq_flags);
         }
 
-        if (IPI_flags & XPC_IPI_OPENREPLY) {
+        if (chctl_flags & XPC_CHCTL_OPENREPLY) {
 
-                dev_dbg(xpc_chan, "XPC_IPI_OPENREPLY (local_msgqueue_pa=0x%lx, "
-                        "local_nentries=%d, remote_nentries=%d) received from "
-                        "partid=%d, channel=%d\n", args->local_msgqueue_pa,
-                        args->local_nentries, args->remote_nentries,
-                        ch->partid, ch->number);
+                dev_dbg(xpc_chan, "XPC_CHCTL_OPENREPLY (local_msgqueue_pa="
+                        "0x%lx, local_nentries=%d, remote_nentries=%d) "
+                        "received from partid=%d, channel=%d\n",
+                        args->local_msgqueue_pa, args->local_nentries,
+                        args->remote_nentries, ch->partid, ch->number);
 
                 if (ch->flags & (XPC_C_DISCONNECTING | XPC_C_DISCONNECTED)) {
                         spin_unlock_irqrestore(&ch->lock, irq_flags);
@@ -1012,10 +403,10 @@ again:
                 DBUG_ON(args->remote_nentries == 0);
 
                 ch->flags |= XPC_C_ROPENREPLY;
-                ch->remote_msgqueue_pa = args->local_msgqueue_pa;
+                xpc_save_remote_msgqueue_pa(ch, args->local_msgqueue_pa);
 
                 if (args->local_nentries < ch->remote_nentries) {
-                        dev_dbg(xpc_chan, "XPC_IPI_OPENREPLY: new "
+                        dev_dbg(xpc_chan, "XPC_CHCTL_OPENREPLY: new "
                                 "remote_nentries=%d, old remote_nentries=%d, "
                                 "partid=%d, channel=%d\n",
                                 args->local_nentries, ch->remote_nentries,
@@ -1024,7 +415,7 @@ again:
                         ch->remote_nentries = args->local_nentries;
                 }
                 if (args->remote_nentries < ch->local_nentries) {
-                        dev_dbg(xpc_chan, "XPC_IPI_OPENREPLY: new "
+                        dev_dbg(xpc_chan, "XPC_CHCTL_OPENREPLY: new "
                                 "local_nentries=%d, old local_nentries=%d, "
                                 "partid=%d, channel=%d\n",
                                 args->remote_nentries, ch->local_nentries,
@@ -1082,7 +473,7 @@ xpc_connect_channel(struct xpc_channel *ch)
         ch->local_nentries = registration->nentries;
 
         if (ch->flags & XPC_C_ROPENREQUEST) {
-                if (registration->msg_size != ch->msg_size) {
+                if (registration->entry_size != ch->entry_size) {
                         /* the local and remote sides aren't the same */
 
                         /*
@@ -1101,7 +492,7 @@ xpc_connect_channel(struct xpc_channel *ch)
                         return xpUnequalMsgSizes;
                 }
         } else {
-                ch->msg_size = registration->msg_size;
+                ch->entry_size = registration->entry_size;
 
                 XPC_SET_REASON(ch, 0, 0);
                 ch->flags &= ~XPC_C_DISCONNECTED;
@@ -1114,7 +505,7 @@ xpc_connect_channel(struct xpc_channel *ch)
         /* initiate the connection */
 
         ch->flags |= (XPC_C_OPENREQUEST | XPC_C_CONNECTING);
-        xpc_IPI_send_openrequest(ch, &irq_flags);
+        xpc_send_chctl_openrequest(ch, &irq_flags);
 
         xpc_process_connect(ch, &irq_flags);
 
@@ -1123,152 +514,16 @@ xpc_connect_channel(struct xpc_channel *ch)
         return xpSuccess;
 }
 
-/*
- * Clear some of the msg flags in the local message queue.
- */
-static inline void
-xpc_clear_local_msgqueue_flags(struct xpc_channel *ch)
-{
-        struct xpc_msg *msg;
-        s64 get;
-
-        get = ch->w_remote_GP.get;
-        do {
-                msg = (struct xpc_msg *)((u64)ch->local_msgqueue +
-                                         (get % ch->local_nentries) *
-                                         ch->msg_size);
-                msg->flags = 0;
-        } while (++get < ch->remote_GP.get);
-}
-
-/*
- * Clear some of the msg flags in the remote message queue.
- */
-static inline void
-xpc_clear_remote_msgqueue_flags(struct xpc_channel *ch)
-{
-        struct xpc_msg *msg;
-        s64 put;
-
-        put = ch->w_remote_GP.put;
-        do {
-                msg = (struct xpc_msg *)((u64)ch->remote_msgqueue +
-                                         (put % ch->remote_nentries) *
-                                         ch->msg_size);
-                msg->flags = 0;
-        } while (++put < ch->remote_GP.put);
-}
-
-static void
-xpc_process_msg_IPI(struct xpc_partition *part, int ch_number)
-{
-        struct xpc_channel *ch = &part->channels[ch_number];
-        int nmsgs_sent;
-
-        ch->remote_GP = part->remote_GPs[ch_number];
-
-        /* See what, if anything, has changed for each connected channel */
-
-        xpc_msgqueue_ref(ch);
-
-        if (ch->w_remote_GP.get == ch->remote_GP.get &&
-            ch->w_remote_GP.put == ch->remote_GP.put) {
-                /* nothing changed since GPs were last pulled */
-                xpc_msgqueue_deref(ch);
-                return;
-        }
-
-        if (!(ch->flags & XPC_C_CONNECTED)) {
-                xpc_msgqueue_deref(ch);
-                return;
-        }
-
-        /*
-         * First check to see if messages recently sent by us have been
-         * received by the other side. (The remote GET value will have
-         * changed since we last looked at it.)
-         */
-
-        if (ch->w_remote_GP.get != ch->remote_GP.get) {
-
-                /*
-                 * We need to notify any senders that want to be notified
-                 * that their sent messages have been received by their
-                 * intended recipients. We need to do this before updating
-                 * w_remote_GP.get so that we don't allocate the same message
-                 * queue entries prematurely (see xpc_allocate_msg()).
-                 */
-                if (atomic_read(&ch->n_to_notify) > 0) {
-                        /*
-                         * Notify senders that messages sent have been
-                         * received and delivered by the other side.
-                         */
-                        xpc_notify_senders(ch, xpMsgDelivered,
-                                           ch->remote_GP.get);
-                }
-
-                /*
-                 * Clear msg->flags in previously sent messages, so that
-                 * they're ready for xpc_allocate_msg().
-                 */
-                xpc_clear_local_msgqueue_flags(ch);
-
-                ch->w_remote_GP.get = ch->remote_GP.get;
-
-                dev_dbg(xpc_chan, "w_remote_GP.get changed to %ld, partid=%d, "
-                        "channel=%d\n", ch->w_remote_GP.get, ch->partid,
-                        ch->number);
-
-                /*
-                 * If anyone was waiting for message queue entries to become
-                 * available, wake them up.
-                 */
-                if (atomic_read(&ch->n_on_msg_allocate_wq) > 0)
-                        wake_up(&ch->msg_allocate_wq);
-        }
-
-        /*
-         * Now check for newly sent messages by the other side. (The remote
-         * PUT value will have changed since we last looked at it.)
-         */
-
-        if (ch->w_remote_GP.put != ch->remote_GP.put) {
-                /*
-                 * Clear msg->flags in previously received messages, so that
-                 * they're ready for xpc_get_deliverable_msg().
-                 */
-                xpc_clear_remote_msgqueue_flags(ch);
-
-                ch->w_remote_GP.put = ch->remote_GP.put;
-
-                dev_dbg(xpc_chan, "w_remote_GP.put changed to %ld, partid=%d, "
-                        "channel=%d\n", ch->w_remote_GP.put, ch->partid,
-                        ch->number);
-
-                nmsgs_sent = ch->w_remote_GP.put - ch->w_local_GP.get;
-                if (nmsgs_sent > 0) {
-                        dev_dbg(xpc_chan, "msgs waiting to be copied and "
-                                "delivered=%d, partid=%d, channel=%d\n",
-                                nmsgs_sent, ch->partid, ch->number);
-
-                        if (ch->flags & XPC_C_CONNECTEDCALLOUT_MADE)
-                                xpc_activate_kthreads(ch, nmsgs_sent);
-                }
-        }
-
-        xpc_msgqueue_deref(ch);
-}
-
 void
-xpc_process_channel_activity(struct xpc_partition *part)
+xpc_process_sent_chctl_flags(struct xpc_partition *part)
 {
         unsigned long irq_flags;
-        u64 IPI_amo, IPI_flags;
+        union xpc_channel_ctl_flags chctl;
         struct xpc_channel *ch;
         int ch_number;
         u32 ch_flags;
 
-        IPI_amo = xpc_get_IPI_flags(part);
+        chctl.all_flags = xpc_get_chctl_all_flags(part);
 
         /*
          * Initiate channel connections for registered channels.
@@ -1281,14 +536,14 @@ xpc_process_channel_activity(struct xpc_partition *part)
                 ch = &part->channels[ch_number];
 
                 /*
-                 * Process any open or close related IPI flags, and then deal
+                 * Process any open or close related chctl flags, and then deal
                  * with connecting or disconnecting the channel as required.
                  */
 
-                IPI_flags = XPC_GET_IPI_FLAGS(IPI_amo, ch_number);
-
-                if (XPC_ANY_OPENCLOSE_IPI_FLAGS_SET(IPI_flags))
-                        xpc_process_openclose_IPI(part, ch_number, IPI_flags);
+                if (chctl.flags[ch_number] & XPC_OPENCLOSE_CHCTL_FLAGS) {
+                        xpc_process_openclose_chctl_flags(part, ch_number,
+                                                        chctl.flags[ch_number]);
+                }
 
                 ch_flags = ch->flags;   /* need an atomic snapshot of flags */
 
@@ -1299,7 +554,7 @@ xpc_process_channel_activity(struct xpc_partition *part)
                         continue;
                 }
 
-                if (part->act_state == XPC_P_DEACTIVATING)
+                if (part->act_state == XPC_P_AS_DEACTIVATING)
                         continue;
 
                 if (!(ch_flags & XPC_C_CONNECTED)) {
@@ -1315,13 +570,13 @@ xpc_process_channel_activity(struct xpc_partition *part)
                 }
 
                 /*
-                 * Process any message related IPI flags, this may involve the
-                 * activation of kthreads to deliver any pending messages sent
-                 * from the other partition.
+                 * Process any message related chctl flags, this may involve
+                 * the activation of kthreads to deliver any pending messages
+                 * sent from the other partition.
                  */
 
-                if (XPC_ANY_MSG_IPI_FLAGS_SET(IPI_flags))
-                        xpc_process_msg_IPI(part, ch_number);
+                if (chctl.flags[ch_number] & XPC_MSG_CHCTL_FLAGS)
+                        xpc_process_msg_chctl_flags(part, ch_number);
         }
 }
 
@@ -1369,59 +624,6 @@ xpc_partition_going_down(struct xpc_partition *part, enum xp_retval reason)
 }
 
 /*
- * Teardown the infrastructure necessary to support XPartition Communication
- * between the specified remote partition and the local one.
- */
-void
-xpc_teardown_infrastructure(struct xpc_partition *part)
-{
-        short partid = XPC_PARTID(part);
-
-        /*
-         * We start off by making this partition inaccessible to local
-         * processes by marking it as no longer setup. Then we make it
-         * inaccessible to remote processes by clearing the XPC per partition
-         * specific variable's magic # (which indicates that these variables
-         * are no longer valid) and by ignoring all XPC notify IPIs sent to
-         * this partition.
-         */
-
-        DBUG_ON(atomic_read(&part->nchannels_engaged) != 0);
-        DBUG_ON(atomic_read(&part->nchannels_active) != 0);
-        DBUG_ON(part->setup_state != XPC_P_SETUP);
-        part->setup_state = XPC_P_WTEARDOWN;
-
-        xpc_vars_part[partid].magic = 0;
-
-        free_irq(SGI_XPC_NOTIFY, (void *)(u64)partid);
-
-        /*
-         * Before proceeding with the teardown we have to wait until all
-         * existing references cease.
-         */
-        wait_event(part->teardown_wq, (atomic_read(&part->references) == 0));
-
-        /* now we can begin tearing down the infrastructure */
-
-        part->setup_state = XPC_P_TORNDOWN;
-
-        /* in case we've still got outstanding timers registered... */
-        del_timer_sync(&part->dropped_IPI_timer);
-
-        kfree(part->remote_openclose_args_base);
-        part->remote_openclose_args = NULL;
-        kfree(part->local_openclose_args_base);
-        part->local_openclose_args = NULL;
-        kfree(part->remote_GPs_base);
-        part->remote_GPs = NULL;
-        kfree(part->local_GPs_base);
-        part->local_GPs = NULL;
-        kfree(part->channels);
-        part->channels = NULL;
-        part->local_IPI_amo_va = NULL;
-}
-
-/*
  * Called by XP at the time of channel connection registration to cause
  * XPC to establish connections to all currently active partitions.
  */
@@ -1432,9 +634,9 @@ xpc_initiate_connect(int ch_number)
         struct xpc_partition *part;
         struct xpc_channel *ch;
 
-        DBUG_ON(ch_number < 0 || ch_number >= XPC_NCHANNELS);
+        DBUG_ON(ch_number < 0 || ch_number >= XPC_MAX_NCHANNELS);
 
-        for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) {
+        for (partid = 0; partid < xp_max_npartitions; partid++) {
                 part = &xpc_partitions[partid];
 
                 if (xpc_part_ref(part)) {
@@ -1488,10 +690,10 @@ xpc_initiate_disconnect(int ch_number)
         struct xpc_partition *part;
         struct xpc_channel *ch;
 
-        DBUG_ON(ch_number < 0 || ch_number >= XPC_NCHANNELS);
+        DBUG_ON(ch_number < 0 || ch_number >= XPC_MAX_NCHANNELS);
 
         /* initiate the channel disconnect for every active partition */
-        for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) {
+        for (partid = 0; partid < xp_max_npartitions; partid++) {
                 part = &xpc_partitions[partid];
 
                 if (xpc_part_ref(part)) {
@@ -1550,7 +752,7 @@ xpc_disconnect_channel(const int line, struct xpc_channel *ch,
                        XPC_C_ROPENREQUEST | XPC_C_ROPENREPLY |
                        XPC_C_CONNECTING | XPC_C_CONNECTED);
 
-        xpc_IPI_send_closerequest(ch, irq_flags);
+        xpc_send_chctl_closerequest(ch, irq_flags);
 
         if (channel_was_connected)
                 ch->flags |= XPC_C_WASCONNECTED;
@@ -1598,7 +800,7 @@ xpc_disconnect_callout(struct xpc_channel *ch, enum xp_retval reason)
  * Wait for a message entry to become available for the specified channel,
  * but don't wait any longer than 1 jiffy.
  */
-static enum xp_retval
+enum xp_retval
 xpc_allocate_msg_wait(struct xpc_channel *ch)
 {
         enum xp_retval ret;
@@ -1625,315 +827,54 @@ xpc_allocate_msg_wait(struct xpc_channel *ch)
 }
 
 /*
- * Allocate an entry for a message from the message queue associated with the
- * specified channel.
- */
-static enum xp_retval
-xpc_allocate_msg(struct xpc_channel *ch, u32 flags,
-                 struct xpc_msg **address_of_msg)
-{
-        struct xpc_msg *msg;
-        enum xp_retval ret;
-        s64 put;
-
-        /* this reference will be dropped in xpc_send_msg() */
-        xpc_msgqueue_ref(ch);
-
-        if (ch->flags & XPC_C_DISCONNECTING) {
-                xpc_msgqueue_deref(ch);
-                return ch->reason;
-        }
-        if (!(ch->flags & XPC_C_CONNECTED)) {
-                xpc_msgqueue_deref(ch);
-                return xpNotConnected;
-        }
-
-        /*
-         * Get the next available message entry from the local message queue.
-         * If none are available, we'll make sure that we grab the latest
-         * GP values.
-         */
-        ret = xpTimeout;
-
-        while (1) {
-
-                put = ch->w_local_GP.put;
-                rmb();  /* guarantee that .put loads before .get */
-                if (put - ch->w_remote_GP.get < ch->local_nentries) {
-
-                        /* There are available message entries. We need to try
-                         * to secure one for ourselves. We'll do this by trying
-                         * to increment w_local_GP.put as long as someone else
-                         * doesn't beat us to it. If they do, we'll have to
-                         * try again.
-                         */
-                        if (cmpxchg(&ch->w_local_GP.put, put, put + 1) == put) {
-                                /* we got the entry referenced by put */
-                                break;
-                        }
-                        continue;       /* try again */
-                }
-
-                /*
-                 * There aren't any available msg entries at this time.
-                 *
-                 * In waiting for a message entry to become available,
-                 * we set a timeout in case the other side is not
-                 * sending completion IPIs. This lets us fake an IPI
-                 * that will cause the IPI handler to fetch the latest
-                 * GP values as if an IPI was sent by the other side.
-                 */
-                if (ret == xpTimeout)
-                        xpc_IPI_send_local_msgrequest(ch);
-
-                if (flags & XPC_NOWAIT) {
-                        xpc_msgqueue_deref(ch);
-                        return xpNoWait;
-                }
-
-                ret = xpc_allocate_msg_wait(ch);
-                if (ret != xpInterrupted && ret != xpTimeout) {
-                        xpc_msgqueue_deref(ch);
-                        return ret;
-                }
-        }
-
-        /* get the message's address and initialize it */
-        msg = (struct xpc_msg *)((u64)ch->local_msgqueue +
-                                 (put % ch->local_nentries) * ch->msg_size);
-
-        DBUG_ON(msg->flags != 0);
-        msg->number = put;
-
-        dev_dbg(xpc_chan, "w_local_GP.put changed to %ld; msg=0x%p, "
-                "msg_number=%ld, partid=%d, channel=%d\n", put + 1,
-                (void *)msg, msg->number, ch->partid, ch->number);
-
-        *address_of_msg = msg;
-
-        return xpSuccess;
-}
-
-/*
- * Allocate an entry for a message from the message queue associated with the
- * specified channel. NOTE that this routine can sleep waiting for a message
- * entry to become available. To not sleep, pass in the XPC_NOWAIT flag.
+ * Send a message that contains the user's payload on the specified channel
+ * connected to the specified partition.
  *
- * Arguments:
+ * NOTE that this routine can sleep waiting for a message entry to become
+ * available. To not sleep, pass in the XPC_NOWAIT flag.
  *
- *      partid - ID of partition to which the channel is connected.
- *      ch_number - channel #.
- *      flags - see xpc.h for valid flags.
- *      payload - address of the allocated payload area pointer (filled in on
- *                return) in which the user-defined message is constructed.
- */
-enum xp_retval
-xpc_initiate_allocate(short partid, int ch_number, u32 flags, void **payload)
-{
-        struct xpc_partition *part = &xpc_partitions[partid];
-        enum xp_retval ret = xpUnknownReason;
-        struct xpc_msg *msg = NULL;
-
-        DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS);
-        DBUG_ON(ch_number < 0 || ch_number >= part->nchannels);
-
-        *payload = NULL;
-
-        if (xpc_part_ref(part)) {
-                ret = xpc_allocate_msg(&part->channels[ch_number], flags, &msg);
-                xpc_part_deref(part);
-
-                if (msg != NULL)
-                        *payload = &msg->payload;
-        }
-
-        return ret;
-}
-
-/*
- * Now we actually send the messages that are ready to be sent by advancing
- * the local message queue's Put value and then send an IPI to the recipient
- * partition.
- */
-static void
-xpc_send_msgs(struct xpc_channel *ch, s64 initial_put)
-{
-        struct xpc_msg *msg;
-        s64 put = initial_put + 1;
-        int send_IPI = 0;
-
-        while (1) {
-
-                while (1) {
-                        if (put == ch->w_local_GP.put)
-                                break;
-
-                        msg = (struct xpc_msg *)((u64)ch->local_msgqueue +
-                                                 (put % ch->local_nentries) *
-                                                 ch->msg_size);
-
-                        if (!(msg->flags & XPC_M_READY))
-                                break;
-
-                        put++;
-                }
-
-                if (put == initial_put) {
-                        /* nothing's changed */
-                        break;
-                }
-
-                if (cmpxchg_rel(&ch->local_GP->put, initial_put, put) !=
-                    initial_put) {
-                        /* someone else beat us to it */
-                        DBUG_ON(ch->local_GP->put < initial_put);
-                        break;
-                }
-
-                /* we just set the new value of local_GP->put */
-
-                dev_dbg(xpc_chan, "local_GP->put changed to %ld, partid=%d, "
-                        "channel=%d\n", put, ch->partid, ch->number);
-
-                send_IPI = 1;
-
-                /*
-                 * We need to ensure that the message referenced by
-                 * local_GP->put is not XPC_M_READY or that local_GP->put
-                 * equals w_local_GP.put, so we'll go have a look.
-                 */
-                initial_put = put;
-        }
-
-        if (send_IPI)
-                xpc_IPI_send_msgrequest(ch);
-}
-
-/*
- * Common code that does the actual sending of the message by advancing the
- * local message queue's Put value and sends an IPI to the partition the
- * message is being sent to.
- */
-static enum xp_retval
-xpc_send_msg(struct xpc_channel *ch, struct xpc_msg *msg, u8 notify_type,
-             xpc_notify_func func, void *key)
-{
-        enum xp_retval ret = xpSuccess;
-        struct xpc_notify *notify = notify;
-        s64 put, msg_number = msg->number;
-
-        DBUG_ON(notify_type == XPC_N_CALL && func == NULL);
-        DBUG_ON((((u64)msg - (u64)ch->local_msgqueue) / ch->msg_size) !=
-                msg_number % ch->local_nentries);
-        DBUG_ON(msg->flags & XPC_M_READY);
-
-        if (ch->flags & XPC_C_DISCONNECTING) {
-                /* drop the reference grabbed in xpc_allocate_msg() */
-                xpc_msgqueue_deref(ch);
-                return ch->reason;
-        }
-
-        if (notify_type != 0) {
-                /*
-                 * Tell the remote side to send an ACK interrupt when the
-                 * message has been delivered.
-                 */
-                msg->flags |= XPC_M_INTERRUPT;
-
-                atomic_inc(&ch->n_to_notify);
-
-                notify = &ch->notify_queue[msg_number % ch->local_nentries];
-                notify->func = func;
-                notify->key = key;
-                notify->type = notify_type;
-
-                /* >>> is a mb() needed here? */
-
-                if (ch->flags & XPC_C_DISCONNECTING) {
-                        /*
-                         * An error occurred between our last error check and
-                         * this one. We will try to clear the type field from
-                         * the notify entry. If we succeed then
-                         * xpc_disconnect_channel() didn't already process
-                         * the notify entry.
-                         */
-                        if (cmpxchg(&notify->type, notify_type, 0) ==
-                            notify_type) {
-                                atomic_dec(&ch->n_to_notify);
-                                ret = ch->reason;
-                        }
-
-                        /* drop the reference grabbed in xpc_allocate_msg() */
-                        xpc_msgqueue_deref(ch);
-                        return ret;
-                }
-        }
-
-        msg->flags |= XPC_M_READY;
-
-        /*
-         * The preceding store of msg->flags must occur before the following
-         * load of ch->local_GP->put.
-         */
-        mb();
-
-        /* see if the message is next in line to be sent, if so send it */
-
-        put = ch->local_GP->put;
-        if (put == msg_number)
-                xpc_send_msgs(ch, put);
-
-        /* drop the reference grabbed in xpc_allocate_msg() */
-        xpc_msgqueue_deref(ch);
-        return ret;
-}
-
-/*
- * Send a message previously allocated using xpc_initiate_allocate() on the
- * specified channel connected to the specified partition.
- *
- * This routine will not wait for the message to be received, nor will
- * notification be given when it does happen. Once this routine has returned
- * the message entry allocated via xpc_initiate_allocate() is no longer
- * accessable to the caller.
- *
- * This routine, although called by users, does not call xpc_part_ref() to
- * ensure that the partition infrastructure is in place. It relies on the
- * fact that we called xpc_msgqueue_ref() in xpc_allocate_msg().
+ * Once sent, this routine will not wait for the message to be received, nor
+ * will notification be given when it does happen.
  *
  * Arguments:
  *
  *      partid - ID of partition to which the channel is connected.
  *      ch_number - channel # to send message on.
- *      payload - pointer to the payload area allocated via
- *                      xpc_initiate_allocate().
+ *      flags - see xp.h for valid flags.
+ *      payload - pointer to the payload which is to be sent.
+ *      payload_size - size of the payload in bytes.
  */
 enum xp_retval
-xpc_initiate_send(short partid, int ch_number, void *payload)
+xpc_initiate_send(short partid, int ch_number, u32 flags, void *payload,
+                  u16 payload_size)
 {
         struct xpc_partition *part = &xpc_partitions[partid];
-        struct xpc_msg *msg = XPC_MSG_ADDRESS(payload);
-        enum xp_retval ret;
+        enum xp_retval ret = xpUnknownReason;
 
-        dev_dbg(xpc_chan, "msg=0x%p, partid=%d, channel=%d\n", (void *)msg,
+        dev_dbg(xpc_chan, "payload=0x%p, partid=%d, channel=%d\n", payload,
                 partid, ch_number);
 
-        DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS);
+        DBUG_ON(partid < 0 || partid >= xp_max_npartitions);
         DBUG_ON(ch_number < 0 || ch_number >= part->nchannels);
-        DBUG_ON(msg == NULL);
+        DBUG_ON(payload == NULL);
 
-        ret = xpc_send_msg(&part->channels[ch_number], msg, 0, NULL, NULL);
+        if (xpc_part_ref(part)) {
+                ret = xpc_send_payload(&part->channels[ch_number], flags,
+                                       payload, payload_size, 0, NULL, NULL);
+                xpc_part_deref(part);
+        }
 
         return ret;
 }
 
 /*
- * Send a message previously allocated using xpc_initiate_allocate on the
- * specified channel connected to the specified partition.
+ * Send a message that contains the user's payload on the specified channel
+ * connected to the specified partition.
  *
- * This routine will not wait for the message to be sent. Once this routine
- * has returned the message entry allocated via xpc_initiate_allocate() is no
- * longer accessable to the caller.
+ * NOTE that this routine can sleep waiting for a message entry to become
+ * available. To not sleep, pass in the XPC_NOWAIT flag.
+ *
+ * This routine will not wait for the message to be sent or received.
  *
  * Once the remote end of the channel has received the message, the function
  * passed as an argument to xpc_initiate_send_notify() will be called. This
@@ -1943,158 +884,51 @@ xpc_initiate_send(short partid, int ch_number, void *payload)
  *
  * If this routine returns an error, the caller's function will NOT be called.
  *
- * This routine, although called by users, does not call xpc_part_ref() to
- * ensure that the partition infrastructure is in place. It relies on the
- * fact that we called xpc_msgqueue_ref() in xpc_allocate_msg().
- *
  * Arguments:
  *
  *      partid - ID of partition to which the channel is connected.
  *      ch_number - channel # to send message on.
- *      payload - pointer to the payload area allocated via
- *                      xpc_initiate_allocate().
+ *      flags - see xp.h for valid flags.
+ *      payload - pointer to the payload which is to be sent.
+ *      payload_size - size of the payload in bytes.
  *      func - function to call with asynchronous notification of message
  *                receipt. THIS FUNCTION MUST BE NON-BLOCKING.
  *      key - user-defined key to be passed to the function when it's called.
  */
 enum xp_retval
-xpc_initiate_send_notify(short partid, int ch_number, void *payload,
-                         xpc_notify_func func, void *key)
+xpc_initiate_send_notify(short partid, int ch_number, u32 flags, void *payload,
+                         u16 payload_size, xpc_notify_func func, void *key)
 {
         struct xpc_partition *part = &xpc_partitions[partid];
-        struct xpc_msg *msg = XPC_MSG_ADDRESS(payload);
-        enum xp_retval ret;
+        enum xp_retval ret = xpUnknownReason;
 
-        dev_dbg(xpc_chan, "msg=0x%p, partid=%d, channel=%d\n", (void *)msg,
+        dev_dbg(xpc_chan, "payload=0x%p, partid=%d, channel=%d\n", payload,
                 partid, ch_number);
 
-        DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS);
+        DBUG_ON(partid < 0 || partid >= xp_max_npartitions);
         DBUG_ON(ch_number < 0 || ch_number >= part->nchannels);
-        DBUG_ON(msg == NULL);
+        DBUG_ON(payload == NULL);
         DBUG_ON(func == NULL);
 
-        ret = xpc_send_msg(&part->channels[ch_number], msg, XPC_N_CALL,
-                           func, key);
-        return ret;
-}
-
-static struct xpc_msg *
-xpc_pull_remote_msg(struct xpc_channel *ch, s64 get)
-{
-        struct xpc_partition *part = &xpc_partitions[ch->partid];
-        struct xpc_msg *remote_msg, *msg;
-        u32 msg_index, nmsgs;
-        u64 msg_offset;
-        enum xp_retval ret;
-
-        if (mutex_lock_interruptible(&ch->msg_to_pull_mutex) != 0) {
-                /* we were interrupted by a signal */
-                return NULL;
-        }
-
-        while (get >= ch->next_msg_to_pull) {
-
-                /* pull as many messages as are ready and able to be pulled */
-
-                msg_index = ch->next_msg_to_pull % ch->remote_nentries;
-
-                DBUG_ON(ch->next_msg_to_pull >= ch->w_remote_GP.put);
-                nmsgs = ch->w_remote_GP.put - ch->next_msg_to_pull;
-                if (msg_index + nmsgs > ch->remote_nentries) {
-                        /* ignore the ones that wrap the msg queue for now */
-                        nmsgs = ch->remote_nentries - msg_index;
-                }
-
-                msg_offset = msg_index * ch->msg_size;
-                msg = (struct xpc_msg *)((u64)ch->remote_msgqueue + msg_offset);
-                remote_msg = (struct xpc_msg *)(ch->remote_msgqueue_pa +
-                                                msg_offset);
-
-                ret = xpc_pull_remote_cachelines(part, msg, remote_msg,
-                                                 nmsgs * ch->msg_size);
-                if (ret != xpSuccess) {
-
-                        dev_dbg(xpc_chan, "failed to pull %d msgs starting with"
-                                " msg %ld from partition %d, channel=%d, "
-                                "ret=%d\n", nmsgs, ch->next_msg_to_pull,
-                                ch->partid, ch->number, ret);
-
-                        XPC_DEACTIVATE_PARTITION(part, ret);
-
-                        mutex_unlock(&ch->msg_to_pull_mutex);
-                        return NULL;
-                }
-
-                ch->next_msg_to_pull += nmsgs;
+        if (xpc_part_ref(part)) {
+                ret = xpc_send_payload(&part->channels[ch_number], flags,
+                                       payload, payload_size, XPC_N_CALL, func,
+                                       key);
+                xpc_part_deref(part);
         }
-
-        mutex_unlock(&ch->msg_to_pull_mutex);
-
-        /* return the message we were looking for */
-        msg_offset = (get % ch->remote_nentries) * ch->msg_size;
-        msg = (struct xpc_msg *)((u64)ch->remote_msgqueue + msg_offset);
-
-        return msg;
-}
-
-/*
- * Get a message to be delivered.
- */
-static struct xpc_msg *
-xpc_get_deliverable_msg(struct xpc_channel *ch)
-{
-        struct xpc_msg *msg = NULL;
-        s64 get;
-
-        do {
-                if (ch->flags & XPC_C_DISCONNECTING)
-                        break;
-
-                get = ch->w_local_GP.get;
-                rmb();  /* guarantee that .get loads before .put */
-                if (get == ch->w_remote_GP.put)
-                        break;
-
-                /* There are messages waiting to be pulled and delivered.
-                 * We need to try to secure one for ourselves. We'll do this
-                 * by trying to increment w_local_GP.get and hope that no one
-                 * else beats us to it. If they do, we'll we'll simply have
-                 * to try again for the next one.
-                 */
-
-                if (cmpxchg(&ch->w_local_GP.get, get, get + 1) == get) {
-                        /* we got the entry referenced by get */
-
-                        dev_dbg(xpc_chan, "w_local_GP.get changed to %ld, "
-                                "partid=%d, channel=%d\n", get + 1,
-                                ch->partid, ch->number);
-
-                        /* pull the message from the remote partition */
-
-                        msg = xpc_pull_remote_msg(ch, get);
-
-                        DBUG_ON(msg != NULL && msg->number != get);
-                        DBUG_ON(msg != NULL && (msg->flags & XPC_M_DONE));
-                        DBUG_ON(msg != NULL && !(msg->flags & XPC_M_READY));
-
-                        break;
-                }
-
-        } while (1);
-
-        return msg;
+        return ret;
 }
 
 /*
- * Deliver a message to its intended recipient.
+ * Deliver a message's payload to its intended recipient.
  */
 void
-xpc_deliver_msg(struct xpc_channel *ch)
+xpc_deliver_payload(struct xpc_channel *ch)
 {
-        struct xpc_msg *msg;
+        void *payload;
 
-        msg = xpc_get_deliverable_msg(ch);
-        if (msg != NULL) {
+        payload = xpc_get_deliverable_payload(ch);
+        if (payload != NULL) {
 
                 /*
                  * This ref is taken to protect the payload itself from being
@@ -2106,18 +940,16 @@ xpc_deliver_msg(struct xpc_channel *ch)
                 atomic_inc(&ch->kthreads_active);
 
                 if (ch->func != NULL) {
-                        dev_dbg(xpc_chan, "ch->func() called, msg=0x%p, "
-                                "msg_number=%ld, partid=%d, channel=%d\n",
-                                (void *)msg, msg->number, ch->partid,
+                        dev_dbg(xpc_chan, "ch->func() called, payload=0x%p "
+                                "partid=%d channel=%d\n", payload, ch->partid,
                                 ch->number);
 
                         /* deliver the message to its intended recipient */
-                        ch->func(xpMsgReceived, ch->partid, ch->number,
-                                 &msg->payload, ch->key);
+                        ch->func(xpMsgReceived, ch->partid, ch->number, payload,
+                                 ch->key);
 
-                        dev_dbg(xpc_chan, "ch->func() returned, msg=0x%p, "
-                                "msg_number=%ld, partid=%d, channel=%d\n",
-                                (void *)msg, msg->number, ch->partid,
+                        dev_dbg(xpc_chan, "ch->func() returned, payload=0x%p "
+                                "partid=%d channel=%d\n", payload, ch->partid,
                                 ch->number);
                 }
 
@@ -2126,118 +958,31 @@ xpc_deliver_msg(struct xpc_channel *ch)
 }
 
 /*
- * Now we actually acknowledge the messages that have been delivered and ack'd
- * by advancing the cached remote message queue's Get value and if requested
- * send an IPI to the message sender's partition.
- */
-static void
-xpc_acknowledge_msgs(struct xpc_channel *ch, s64 initial_get, u8 msg_flags)
-{
-        struct xpc_msg *msg;
-        s64 get = initial_get + 1;
-        int send_IPI = 0;
-
-        while (1) {
-
-                while (1) {
-                        if (get == ch->w_local_GP.get)
-                                break;
-
-                        msg = (struct xpc_msg *)((u64)ch->remote_msgqueue +
-                                                 (get % ch->remote_nentries) *
-                                                 ch->msg_size);
-
-                        if (!(msg->flags & XPC_M_DONE))
-                                break;
-
-                        msg_flags |= msg->flags;
-                        get++;
-                }
-
-                if (get == initial_get) {
-                        /* nothing's changed */
-                        break;
-                }
-
-                if (cmpxchg_rel(&ch->local_GP->get, initial_get, get) !=
-                    initial_get) {
-                        /* someone else beat us to it */
-                        DBUG_ON(ch->local_GP->get <= initial_get);
-                        break;
-                }
-
-                /* we just set the new value of local_GP->get */
-
-                dev_dbg(xpc_chan, "local_GP->get changed to %ld, partid=%d, "
-                        "channel=%d\n", get, ch->partid, ch->number);
-
-                send_IPI = (msg_flags & XPC_M_INTERRUPT);
-
-                /*
-                 * We need to ensure that the message referenced by
-                 * local_GP->get is not XPC_M_DONE or that local_GP->get
-                 * equals w_local_GP.get, so we'll go have a look.
-                 */
-                initial_get = get;
-        }
-
-        if (send_IPI)
-                xpc_IPI_send_msgrequest(ch);
-}
-
-/*
- * Acknowledge receipt of a delivered message.
- *
- * If a message has XPC_M_INTERRUPT set, send an interrupt to the partition
- * that sent the message.
+ * Acknowledge receipt of a delivered message's payload.
  *
  * This function, although called by users, does not call xpc_part_ref() to
  * ensure that the partition infrastructure is in place. It relies on the
- * fact that we called xpc_msgqueue_ref() in xpc_deliver_msg().
+ * fact that we called xpc_msgqueue_ref() in xpc_deliver_payload().
  *
  * Arguments:
  *
  *      partid - ID of partition to which the channel is connected.
  *      ch_number - channel # message received on.
  *      payload - pointer to the payload area allocated via
- *                      xpc_initiate_allocate().
+ *                      xpc_initiate_send() or xpc_initiate_send_notify().
  */
 void
 xpc_initiate_received(short partid, int ch_number, void *payload)
 {
         struct xpc_partition *part = &xpc_partitions[partid];
         struct xpc_channel *ch;
-        struct xpc_msg *msg = XPC_MSG_ADDRESS(payload);
-        s64 get, msg_number = msg->number;
 
-        DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS);
+        DBUG_ON(partid < 0 || partid >= xp_max_npartitions);
         DBUG_ON(ch_number < 0 || ch_number >= part->nchannels);
 
         ch = &part->channels[ch_number];
+        xpc_received_payload(ch, payload);
 
-        dev_dbg(xpc_chan, "msg=0x%p, msg_number=%ld, partid=%d, channel=%d\n",
-                (void *)msg, msg_number, ch->partid, ch->number);
-
-        DBUG_ON((((u64)msg - (u64)ch->remote_msgqueue) / ch->msg_size) !=
-                msg_number % ch->remote_nentries);
-        DBUG_ON(msg->flags & XPC_M_DONE);
-
-        msg->flags |= XPC_M_DONE;
-
-        /*
-         * The preceding store of msg->flags must occur before the following
-         * load of ch->local_GP->get.
-         */
-        mb();
-
-        /*
-         * See if this message is next in line to be acknowledged as having
-         * been delivered.
-         */
-        get = ch->local_GP->get;
-        if (get == msg_number)
-                xpc_acknowledge_msgs(ch, get, msg->flags);
-
-        /* the call to xpc_msgqueue_ref() was done by xpc_deliver_msg()  */
+        /* the call to xpc_msgqueue_ref() was done by xpc_deliver_payload()  */
         xpc_msgqueue_deref(ch);
 }
diff --git a/drivers/misc/sgi-xp/xpc_main.c b/drivers/misc/sgi-xp/xpc_main.c
index 579b01ff82d4..46325fc84811 100644
--- a/drivers/misc/sgi-xp/xpc_main.c
+++ b/drivers/misc/sgi-xp/xpc_main.c
@@ -25,37 +25,31 @@
  *
  *      Caveats:
  *
- *        . We currently have no way to determine which nasid an IPI came
- *          from. Thus, xpc_IPI_send() does a remote AMO write followed by
- *          an IPI. The AMO indicates where data is to be pulled from, so
- *          after the IPI arrives, the remote partition checks the AMO word.
- *          The IPI can actually arrive before the AMO however, so other code
- *          must periodically check for this case. Also, remote AMO operations
- *          do not reliably time out. Thus we do a remote PIO read solely to
- *          know whether the remote partition is down and whether we should
- *          stop sending IPIs to it. This remote PIO read operation is set up
- *          in a special nofault region so SAL knows to ignore (and cleanup)
- *          any errors due to the remote AMO write, PIO read, and/or PIO
- *          write operations.
+ *        . Currently on sn2, we have no way to determine which nasid an IRQ
+ *          came from. Thus, xpc_send_IRQ_sn2() does a remote amo write
+ *          followed by an IPI. The amo indicates where data is to be pulled
+ *          from, so after the IPI arrives, the remote partition checks the amo
+ *          word. The IPI can actually arrive before the amo however, so other
+ *          code must periodically check for this case. Also, remote amo
+ *          operations do not reliably time out. Thus we do a remote PIO read
+ *          solely to know whether the remote partition is down and whether we
+ *          should stop sending IPIs to it. This remote PIO read operation is
+ *          set up in a special nofault region so SAL knows to ignore (and
+ *          cleanup) any errors due to the remote amo write, PIO read, and/or
+ *          PIO write operations.
  *
  *          If/when new hardware solves this IPI problem, we should abandon
  *          the current approach.
  *
  */
 
-#include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/init.h>
-#include <linux/cache.h>
-#include <linux/interrupt.h>
+#include <linux/sysctl.h>
+#include <linux/device.h>
 #include <linux/delay.h>
 #include <linux/reboot.h>
-#include <linux/completion.h>
 #include <linux/kdebug.h>
 #include <linux/kthread.h>
-#include <linux/uaccess.h>
-#include <asm/sn/intr.h>
-#include <asm/sn/sn_sal.h>
 #include "xpc.h"
 
 /* define two XPC debug device structures to be used with dev_dbg() et al */
@@ -89,9 +83,9 @@ static int xpc_hb_check_interval = XPC_HB_CHECK_DEFAULT_INTERVAL;
 static int xpc_hb_check_min_interval = 10;
 static int xpc_hb_check_max_interval = 120;
 
-int xpc_disengage_request_timelimit = XPC_DISENGAGE_REQUEST_DEFAULT_TIMELIMIT;
-static int xpc_disengage_request_min_timelimit; /* = 0 */
-static int xpc_disengage_request_max_timelimit = 120;
+int xpc_disengage_timelimit = XPC_DISENGAGE_DEFAULT_TIMELIMIT;
+static int xpc_disengage_min_timelimit; /* = 0 */
+static int xpc_disengage_max_timelimit = 120;
 
 static ctl_table xpc_sys_xpc_hb_dir[] = {
         {
@@ -124,14 +118,14 @@ static ctl_table xpc_sys_xpc_dir[] = {
          .child = xpc_sys_xpc_hb_dir},
         {
          .ctl_name = CTL_UNNUMBERED,
-         .procname = "disengage_request_timelimit",
-         .data = &xpc_disengage_request_timelimit,
+         .procname = "disengage_timelimit",
+         .data = &xpc_disengage_timelimit,
          .maxlen = sizeof(int),
          .mode = 0644,
          .proc_handler = &proc_dointvec_minmax,
          .strategy = &sysctl_intvec,
-         .extra1 = &xpc_disengage_request_min_timelimit,
-         .extra2 = &xpc_disengage_request_max_timelimit},
+         .extra1 = &xpc_disengage_min_timelimit,
+         .extra2 = &xpc_disengage_max_timelimit},
         {}
 };
 static ctl_table xpc_sys_dir[] = {
@@ -144,16 +138,19 @@ static ctl_table xpc_sys_dir[] = {
 };
 static struct ctl_table_header *xpc_sysctl;
 
-/* non-zero if any remote partition disengage request was timed out */
-int xpc_disengage_request_timedout;
+/* non-zero if any remote partition disengage was timed out */
+int xpc_disengage_timedout;
 
-/* #of IRQs received */
-static atomic_t xpc_act_IRQ_rcvd;
+/* #of activate IRQs received and not yet processed */
+int xpc_activate_IRQ_rcvd;
+DEFINE_SPINLOCK(xpc_activate_IRQ_rcvd_lock);
 
 /* IRQ handler notifies this wait queue on receipt of an IRQ */
-static DECLARE_WAIT_QUEUE_HEAD(xpc_act_IRQ_wq);
+DECLARE_WAIT_QUEUE_HEAD(xpc_activate_IRQ_wq);
 
 static unsigned long xpc_hb_check_timeout;
+static struct timer_list xpc_hb_timer;
+void *xpc_heartbeating_to_mask;
 
 /* notification that the xpc_hb_checker thread has exited */
 static DECLARE_COMPLETION(xpc_hb_checker_exited);
@@ -161,8 +158,6 @@ static DECLARE_COMPLETION(xpc_hb_checker_exited);
 /* notification that the xpc_discovery thread has exited */
 static DECLARE_COMPLETION(xpc_discovery_exited);
 
-static struct timer_list xpc_hb_timer;
-
 static void xpc_kthread_waitmsgs(struct xpc_partition *, struct xpc_channel *);
 
 static int xpc_system_reboot(struct notifier_block *, unsigned long, void *);
@@ -175,31 +170,76 @@ static struct notifier_block xpc_die_notifier = {
         .notifier_call = xpc_system_die,
 };
 
+int (*xpc_setup_partitions_sn) (void);
+enum xp_retval (*xpc_get_partition_rsvd_page_pa) (void *buf, u64 *cookie,
+                                                  unsigned long *rp_pa,
+                                                  size_t *len);
+int (*xpc_setup_rsvd_page_sn) (struct xpc_rsvd_page *rp);
+void (*xpc_heartbeat_init) (void);
+void (*xpc_heartbeat_exit) (void);
+void (*xpc_increment_heartbeat) (void);
+void (*xpc_offline_heartbeat) (void);
+void (*xpc_online_heartbeat) (void);
+enum xp_retval (*xpc_get_remote_heartbeat) (struct xpc_partition *part);
+
+enum xp_retval (*xpc_make_first_contact) (struct xpc_partition *part);
+void (*xpc_notify_senders_of_disconnect) (struct xpc_channel *ch);
+u64 (*xpc_get_chctl_all_flags) (struct xpc_partition *part);
+enum xp_retval (*xpc_setup_msg_structures) (struct xpc_channel *ch);
+void (*xpc_teardown_msg_structures) (struct xpc_channel *ch);
+void (*xpc_process_msg_chctl_flags) (struct xpc_partition *part, int ch_number);
+int (*xpc_n_of_deliverable_payloads) (struct xpc_channel *ch);
+void *(*xpc_get_deliverable_payload) (struct xpc_channel *ch);
+
+void (*xpc_request_partition_activation) (struct xpc_rsvd_page *remote_rp,
+                                          unsigned long remote_rp_pa,
+                                          int nasid);
+void (*xpc_request_partition_reactivation) (struct xpc_partition *part);
+void (*xpc_request_partition_deactivation) (struct xpc_partition *part);
+void (*xpc_cancel_partition_deactivation_request) (struct xpc_partition *part);
+
+void (*xpc_process_activate_IRQ_rcvd) (void);
+enum xp_retval (*xpc_setup_ch_structures_sn) (struct xpc_partition *part);
+void (*xpc_teardown_ch_structures_sn) (struct xpc_partition *part);
+
+void (*xpc_indicate_partition_engaged) (struct xpc_partition *part);
+int (*xpc_partition_engaged) (short partid);
+int (*xpc_any_partition_engaged) (void);
+void (*xpc_indicate_partition_disengaged) (struct xpc_partition *part);
+void (*xpc_assume_partition_disengaged) (short partid);
+
+void (*xpc_send_chctl_closerequest) (struct xpc_channel *ch,
+                                     unsigned long *irq_flags);
+void (*xpc_send_chctl_closereply) (struct xpc_channel *ch,
+                                   unsigned long *irq_flags);
+void (*xpc_send_chctl_openrequest) (struct xpc_channel *ch,
+                                    unsigned long *irq_flags);
+void (*xpc_send_chctl_openreply) (struct xpc_channel *ch,
+                                  unsigned long *irq_flags);
+
+void (*xpc_save_remote_msgqueue_pa) (struct xpc_channel *ch,
+                                     unsigned long msgqueue_pa);
+
+enum xp_retval (*xpc_send_payload) (struct xpc_channel *ch, u32 flags,
+                                    void *payload, u16 payload_size,
+                                    u8 notify_type, xpc_notify_func func,
+                                    void *key);
+void (*xpc_received_payload) (struct xpc_channel *ch, void *payload);
+
 /*
- * Timer function to enforce the timelimit on the partition disengage request.
+ * Timer function to enforce the timelimit on the partition disengage.
  */
 static void
-xpc_timeout_partition_disengage_request(unsigned long data)
+xpc_timeout_partition_disengage(unsigned long data)
 {
         struct xpc_partition *part = (struct xpc_partition *)data;
 
-        DBUG_ON(time_before(jiffies, part->disengage_request_timeout));
+        DBUG_ON(time_is_after_jiffies(part->disengage_timeout));
 
         (void)xpc_partition_disengaged(part);
 
-        DBUG_ON(part->disengage_request_timeout != 0);
-        DBUG_ON(xpc_partition_engaged(1UL << XPC_PARTID(part)) != 0);
-}
-
-/*
- * Notify the heartbeat check thread that an IRQ has been received.
- */
-static irqreturn_t
-xpc_act_IRQ_handler(int irq, void *dev_id)
-{
-        atomic_inc(&xpc_act_IRQ_rcvd);
-        wake_up_interruptible(&xpc_act_IRQ_wq);
-        return IRQ_HANDLED;
+        DBUG_ON(part->disengage_timeout != 0);
+        DBUG_ON(xpc_partition_engaged(XPC_PARTID(part)));
 }
 
 /*
@@ -210,15 +250,63 @@ xpc_act_IRQ_handler(int irq, void *dev_id)
 static void
 xpc_hb_beater(unsigned long dummy)
 {
-        xpc_vars->heartbeat++;
+        xpc_increment_heartbeat();
 
-        if (time_after_eq(jiffies, xpc_hb_check_timeout))
-                wake_up_interruptible(&xpc_act_IRQ_wq);
+        if (time_is_before_eq_jiffies(xpc_hb_check_timeout))
+                wake_up_interruptible(&xpc_activate_IRQ_wq);
 
         xpc_hb_timer.expires = jiffies + (xpc_hb_interval * HZ);
         add_timer(&xpc_hb_timer);
 }
 
+static void
+xpc_start_hb_beater(void)
+{
+        xpc_heartbeat_init();
+        init_timer(&xpc_hb_timer);
+        xpc_hb_timer.function = xpc_hb_beater;
+        xpc_hb_beater(0);
+}
+
+static void
+xpc_stop_hb_beater(void)
+{
+        del_timer_sync(&xpc_hb_timer);
+        xpc_heartbeat_exit();
+}
+
+/*
+ * At periodic intervals, scan through all active partitions and ensure
+ * their heartbeat is still active.  If not, the partition is deactivated.
+ */
+static void
+xpc_check_remote_hb(void)
+{
+        struct xpc_partition *part;
+        short partid;
+        enum xp_retval ret;
+
+        for (partid = 0; partid < xp_max_npartitions; partid++) {
+
+                if (xpc_exiting)
+                        break;
+
+                if (partid == xp_partition_id)
+                        continue;
+
+                part = &xpc_partitions[partid];
+
+                if (part->act_state == XPC_P_AS_INACTIVE ||
+                    part->act_state == XPC_P_AS_DEACTIVATING) {
+                        continue;
+                }
+
+                ret = xpc_get_remote_heartbeat(part);
+                if (ret != xpSuccess)
+                        XPC_DEACTIVATE_PARTITION(part, ret);
+        }
+}
+
 /*
  * This thread is responsible for nearly all of the partition
  * activation/deactivation.
@@ -226,67 +314,57 @@ xpc_hb_beater(unsigned long dummy)
 static int
 xpc_hb_checker(void *ignore)
 {
-        int last_IRQ_count = 0;
-        int new_IRQ_count;
         int force_IRQ = 0;
-        cpumask_of_cpu_ptr(cpumask, XPC_HB_CHECK_CPU);
 
         /* this thread was marked active by xpc_hb_init() */
 
-        set_cpus_allowed_ptr(current, cpumask);
+        set_cpus_allowed_ptr(current, &cpumask_of_cpu(XPC_HB_CHECK_CPU));
 
         /* set our heartbeating to other partitions into motion */
         xpc_hb_check_timeout = jiffies + (xpc_hb_check_interval * HZ);
-        xpc_hb_beater(0);
+        xpc_start_hb_beater();
 
         while (!xpc_exiting) {
 
                 dev_dbg(xpc_part, "woke up with %d ticks rem; %d IRQs have "
                         "been received\n",
                         (int)(xpc_hb_check_timeout - jiffies),
-                        atomic_read(&xpc_act_IRQ_rcvd) - last_IRQ_count);
+                        xpc_activate_IRQ_rcvd);
 
                 /* checking of remote heartbeats is skewed by IRQ handling */
-                if (time_after_eq(jiffies, xpc_hb_check_timeout)) {
+                if (time_is_before_eq_jiffies(xpc_hb_check_timeout)) {
+                        xpc_hb_check_timeout = jiffies +
+                            (xpc_hb_check_interval * HZ);
+
                         dev_dbg(xpc_part, "checking remote heartbeats\n");
                         xpc_check_remote_hb();
 
                         /*
-                         * We need to periodically recheck to ensure no
-                         * IPI/AMO pairs have been missed.  That check
-                         * must always reset xpc_hb_check_timeout.
+                         * On sn2 we need to periodically recheck to ensure no
+                         * IRQ/amo pairs have been missed.
                          */
-                        force_IRQ = 1;
+                        if (is_shub())
+                                force_IRQ = 1;
                 }
 
                 /* check for outstanding IRQs */
-                new_IRQ_count = atomic_read(&xpc_act_IRQ_rcvd);
-                if (last_IRQ_count < new_IRQ_count || force_IRQ != 0) {
+                if (xpc_activate_IRQ_rcvd > 0 || force_IRQ != 0) {
                         force_IRQ = 0;
-
-                        dev_dbg(xpc_part, "found an IRQ to process; will be "
-                                "resetting xpc_hb_check_timeout\n");
-
-                        last_IRQ_count += xpc_identify_act_IRQ_sender();
-                        if (last_IRQ_count < new_IRQ_count) {
-                                /* retry once to help avoid missing AMO */
-                                (void)xpc_identify_act_IRQ_sender();
-                        }
-                        last_IRQ_count = new_IRQ_count;
-
-                        xpc_hb_check_timeout = jiffies +
-                            (xpc_hb_check_interval * HZ);
+                        dev_dbg(xpc_part, "processing activate IRQs "
+                                "received\n");
+                        xpc_process_activate_IRQ_rcvd();
                 }
 
                 /* wait for IRQ or timeout */
-                (void)wait_event_interruptible(xpc_act_IRQ_wq,
-                                               (last_IRQ_count <
-                                                atomic_read(&xpc_act_IRQ_rcvd)
-                                                || time_after_eq(jiffies,
-                                                        xpc_hb_check_timeout) ||
+                (void)wait_event_interruptible(xpc_activate_IRQ_wq,
+                                               (time_is_before_eq_jiffies(
+                                                xpc_hb_check_timeout) ||
+                                                xpc_activate_IRQ_rcvd > 0 ||
                                                 xpc_exiting));
         }
 
+        xpc_stop_hb_beater();
+
         dev_dbg(xpc_part, "heartbeat checker is exiting\n");
 
         /* mark this thread as having exited */
@@ -312,37 +390,8 @@ xpc_initiate_discovery(void *ignore)
 }
 
 /*
- * Establish first contact with the remote partititon. This involves pulling
- * the XPC per partition variables from the remote partition and waiting for
- * the remote partition to pull ours.
- */
-static enum xp_retval
-xpc_make_first_contact(struct xpc_partition *part)
-{
-        enum xp_retval ret;
-
-        while ((ret = xpc_pull_remote_vars_part(part)) != xpSuccess) {
-                if (ret != xpRetry) {
-                        XPC_DEACTIVATE_PARTITION(part, ret);
-                        return ret;
-                }
-
-                dev_dbg(xpc_chan, "waiting to make first contact with "
-                        "partition %d\n", XPC_PARTID(part));
-
-                /* wait a 1/4 of a second or so */
-                (void)msleep_interruptible(250);
-
-                if (part->act_state == XPC_P_DEACTIVATING)
-                        return part->reason;
-        }
-
-        return xpc_mark_partition_active(part);
-}
-
-/*
  * The first kthread assigned to a newly activated partition is the one
- * created by XPC HB with which it calls xpc_partition_up(). XPC hangs on to
+ * created by XPC HB with which it calls xpc_activating(). XPC hangs on to
  * that kthread until the partition is brought down, at which time that kthread
  * returns back to XPC HB. (The return of that kthread will signify to XPC HB
  * that XPC has dismantled all communication infrastructure for the associated
@@ -355,11 +404,11 @@ xpc_make_first_contact(struct xpc_partition *part)
 static void
 xpc_channel_mgr(struct xpc_partition *part)
 {
-        while (part->act_state != XPC_P_DEACTIVATING ||
+        while (part->act_state != XPC_P_AS_DEACTIVATING ||
                atomic_read(&part->nchannels_active) > 0 ||
                !xpc_partition_disengaged(part)) {
 
-                xpc_process_channel_activity(part);
+                xpc_process_sent_chctl_flags(part);
 
                 /*
                  * Wait until we've been requested to activate kthreads or
@@ -377,8 +426,8 @@ xpc_channel_mgr(struct xpc_partition *part)
                 atomic_dec(&part->channel_mgr_requests);
                 (void)wait_event_interruptible(part->channel_mgr_wq,
                                 (atomic_read(&part->channel_mgr_requests) > 0 ||
-                                 part->local_IPI_amo != 0 ||
-                                 (part->act_state == XPC_P_DEACTIVATING &&
+                                 part->chctl.all_flags != 0 ||
+                                 (part->act_state == XPC_P_AS_DEACTIVATING &&
                                  atomic_read(&part->nchannels_active) == 0 &&
                                  xpc_partition_disengaged(part))));
                 atomic_set(&part->channel_mgr_requests, 1);
@@ -386,47 +435,163 @@ xpc_channel_mgr(struct xpc_partition *part)
 }
 
 /*
- * When XPC HB determines that a partition has come up, it will create a new
- * kthread and that kthread will call this function to attempt to set up the
- * basic infrastructure used for Cross Partition Communication with the newly
- * upped partition.
- *
- * The kthread that was created by XPC HB and which setup the XPC
- * infrastructure will remain assigned to the partition until the partition
- * goes down. At which time the kthread will teardown the XPC infrastructure
- * and then exit.
- *
- * XPC HB will put the remote partition's XPC per partition specific variables
- * physical address into xpc_partitions[partid].remote_vars_part_pa prior to
- * calling xpc_partition_up().
+ * Guarantee that the kzalloc'd memory is cacheline aligned.
  */
-static void
-xpc_partition_up(struct xpc_partition *part)
+void *
+xpc_kzalloc_cacheline_aligned(size_t size, gfp_t flags, void **base)
+{
+        /* see if kzalloc will give us cachline aligned memory by default */
+        *base = kzalloc(size, flags);
+        if (*base == NULL)
+                return NULL;
+
+        if ((u64)*base == L1_CACHE_ALIGN((u64)*base))
+                return *base;
+
+        kfree(*base);
+
+        /* nope, we'll have to do it ourselves */
+        *base = kzalloc(size + L1_CACHE_BYTES, flags);
+        if (*base == NULL)
+                return NULL;
+
+        return (void *)L1_CACHE_ALIGN((u64)*base);
+}
+
+/*
+ * Setup the channel structures necessary to support XPartition Communication
+ * between the specified remote partition and the local one.
+ */
+static enum xp_retval
+xpc_setup_ch_structures(struct xpc_partition *part)
 {
+        enum xp_retval ret;
+        int ch_number;
+        struct xpc_channel *ch;
+        short partid = XPC_PARTID(part);
+
+        /*
+         * Allocate all of the channel structures as a contiguous chunk of
+         * memory.
+         */
         DBUG_ON(part->channels != NULL);
+        part->channels = kzalloc(sizeof(struct xpc_channel) * XPC_MAX_NCHANNELS,
+                                 GFP_KERNEL);
+        if (part->channels == NULL) {
+                dev_err(xpc_chan, "can't get memory for channels\n");
+                return xpNoMemory;
+        }
 
-        dev_dbg(xpc_chan, "activating partition %d\n", XPC_PARTID(part));
+        /* allocate the remote open and close args */
 
-        if (xpc_setup_infrastructure(part) != xpSuccess)
-                return;
+        part->remote_openclose_args =
+            xpc_kzalloc_cacheline_aligned(XPC_OPENCLOSE_ARGS_SIZE,
+                                          GFP_KERNEL, &part->
+                                          remote_openclose_args_base);
+        if (part->remote_openclose_args == NULL) {
+                dev_err(xpc_chan, "can't get memory for remote connect args\n");
+                ret = xpNoMemory;
+                goto out_1;
+        }
+
+        part->chctl.all_flags = 0;
+        spin_lock_init(&part->chctl_lock);
+
+        atomic_set(&part->channel_mgr_requests, 1);
+        init_waitqueue_head(&part->channel_mgr_wq);
+
+        part->nchannels = XPC_MAX_NCHANNELS;
+
+        atomic_set(&part->nchannels_active, 0);
+        atomic_set(&part->nchannels_engaged, 0);
+
+        for (ch_number = 0; ch_number < part->nchannels; ch_number++) {
+                ch = &part->channels[ch_number];
+
+                ch->partid = partid;
+                ch->number = ch_number;
+                ch->flags = XPC_C_DISCONNECTED;
+
+                atomic_set(&ch->kthreads_assigned, 0);
+                atomic_set(&ch->kthreads_idle, 0);
+                atomic_set(&ch->kthreads_active, 0);
+
+                atomic_set(&ch->references, 0);
+                atomic_set(&ch->n_to_notify, 0);
+
+                spin_lock_init(&ch->lock);
+                init_completion(&ch->wdisconnect_wait);
+
+                atomic_set(&ch->n_on_msg_allocate_wq, 0);
+                init_waitqueue_head(&ch->msg_allocate_wq);
+                init_waitqueue_head(&ch->idle_wq);
+        }
+
+        ret = xpc_setup_ch_structures_sn(part);
+        if (ret != xpSuccess)
+                goto out_2;
+
+        /*
+         * With the setting of the partition setup_state to XPC_P_SS_SETUP,
+         * we're declaring that this partition is ready to go.
+         */
+        part->setup_state = XPC_P_SS_SETUP;
+
+        return xpSuccess;
+
+        /* setup of ch structures failed */
+out_2:
+        kfree(part->remote_openclose_args_base);
+        part->remote_openclose_args = NULL;
+out_1:
+        kfree(part->channels);
+        part->channels = NULL;
+        return ret;
+}
+
+/*
+ * Teardown the channel structures necessary to support XPartition Communication
+ * between the specified remote partition and the local one.
+ */
+static void
+xpc_teardown_ch_structures(struct xpc_partition *part)
+{
+        DBUG_ON(atomic_read(&part->nchannels_engaged) != 0);
+        DBUG_ON(atomic_read(&part->nchannels_active) != 0);
 
         /*
-         * The kthread that XPC HB called us with will become the
-         * channel manager for this partition. It will not return
-         * back to XPC HB until the partition's XPC infrastructure
-         * has been dismantled.
+         * Make this partition inaccessible to local processes by marking it
+         * as no longer setup. Then wait before proceeding with the teardown
+         * until all existing references cease.
          */
+        DBUG_ON(part->setup_state != XPC_P_SS_SETUP);
+        part->setup_state = XPC_P_SS_WTEARDOWN;
 
-        (void)xpc_part_ref(part);       /* this will always succeed */
+        wait_event(part->teardown_wq, (atomic_read(&part->references) == 0));
 
-        if (xpc_make_first_contact(part) == xpSuccess)
-                xpc_channel_mgr(part);
+        /* now we can begin tearing down the infrastructure */
 
-        xpc_part_deref(part);
+        xpc_teardown_ch_structures_sn(part);
 
-        xpc_teardown_infrastructure(part);
+        kfree(part->remote_openclose_args_base);
+        part->remote_openclose_args = NULL;
+        kfree(part->channels);
+        part->channels = NULL;
+
+        part->setup_state = XPC_P_SS_TORNDOWN;
 }
 
+/*
+ * When XPC HB determines that a partition has come up, it will create a new
+ * kthread and that kthread will call this function to attempt to set up the
+ * basic infrastructure used for Cross Partition Communication with the newly
+ * upped partition.
+ *
+ * The kthread that was created by XPC HB and which setup the XPC
+ * infrastructure will remain assigned to the partition becoming the channel
+ * manager for that partition until the partition is deactivating, at which
+ * time the kthread will teardown the XPC infrastructure and then exit.
+ */
 static int
 xpc_activating(void *__partid)
 {
@@ -434,64 +599,47 @@ xpc_activating(void *__partid)
         struct xpc_partition *part = &xpc_partitions[partid];
         unsigned long irq_flags;
 
-        DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS);
+        DBUG_ON(partid < 0 || partid >= xp_max_npartitions);
 
         spin_lock_irqsave(&part->act_lock, irq_flags);
 
-        if (part->act_state == XPC_P_DEACTIVATING) {
-                part->act_state = XPC_P_INACTIVE;
+        if (part->act_state == XPC_P_AS_DEACTIVATING) {
+                part->act_state = XPC_P_AS_INACTIVE;
                 spin_unlock_irqrestore(&part->act_lock, irq_flags);
                 part->remote_rp_pa = 0;
                 return 0;
         }
 
         /* indicate the thread is activating */
-        DBUG_ON(part->act_state != XPC_P_ACTIVATION_REQ);
-        part->act_state = XPC_P_ACTIVATING;
+        DBUG_ON(part->act_state != XPC_P_AS_ACTIVATION_REQ);
+        part->act_state = XPC_P_AS_ACTIVATING;
 
         XPC_SET_REASON(part, 0, 0);
         spin_unlock_irqrestore(&part->act_lock, irq_flags);
 
-        dev_dbg(xpc_part, "bringing partition %d up\n", partid);
+        dev_dbg(xpc_part, "activating partition %d\n", partid);
 
-        /*
-         * Register the remote partition's AMOs with SAL so it can handle
-         * and cleanup errors within that address range should the remote
-         * partition go down. We don't unregister this range because it is
-         * difficult to tell when outstanding writes to the remote partition
-         * are finished and thus when it is safe to unregister. This should
-         * not result in wasted space in the SAL xp_addr_region table because
-         * we should get the same page for remote_amos_page_pa after module
-         * reloads and system reboots.
-         */
-        if (sn_register_xp_addr_region(part->remote_amos_page_pa,
-                                       PAGE_SIZE, 1) < 0) {
-                dev_warn(xpc_part, "xpc_partition_up(%d) failed to register "
-                         "xp_addr region\n", partid);
+        xpc_allow_hb(partid);
 
-                spin_lock_irqsave(&part->act_lock, irq_flags);
-                part->act_state = XPC_P_INACTIVE;
-                XPC_SET_REASON(part, xpPhysAddrRegFailed, __LINE__);
-                spin_unlock_irqrestore(&part->act_lock, irq_flags);
-                part->remote_rp_pa = 0;
-                return 0;
-        }
+        if (xpc_setup_ch_structures(part) == xpSuccess) {
+                (void)xpc_part_ref(part);       /* this will always succeed */
 
-        xpc_allow_hb(partid, xpc_vars);
-        xpc_IPI_send_activated(part);
+                if (xpc_make_first_contact(part) == xpSuccess) {
+                        xpc_mark_partition_active(part);
+                        xpc_channel_mgr(part);
+                        /* won't return until partition is deactivating */
+                }
 
-        /*
-         * xpc_partition_up() holds this thread and marks this partition as
-         * XPC_P_ACTIVE by calling xpc_hb_mark_active().
-         */
-        (void)xpc_partition_up(part);
+                xpc_part_deref(part);
+                xpc_teardown_ch_structures(part);
+        }
 
-        xpc_disallow_hb(partid, xpc_vars);
+        xpc_disallow_hb(partid);
         xpc_mark_partition_inactive(part);
 
         if (part->reason == xpReactivating) {
                 /* interrupting ourselves results in activating partition */
-                xpc_IPI_send_reactivate(part);
+                xpc_request_partition_reactivation(part);
         }
 
         return 0;
@@ -506,9 +654,9 @@ xpc_activate_partition(struct xpc_partition *part)
 
         spin_lock_irqsave(&part->act_lock, irq_flags);
 
-        DBUG_ON(part->act_state != XPC_P_INACTIVE);
+        DBUG_ON(part->act_state != XPC_P_AS_INACTIVE);
 
-        part->act_state = XPC_P_ACTIVATION_REQ;
+        part->act_state = XPC_P_AS_ACTIVATION_REQ;
         XPC_SET_REASON(part, xpCloneKThread, __LINE__);
 
         spin_unlock_irqrestore(&part->act_lock, irq_flags);
@@ -517,62 +665,12 @@ xpc_activate_partition(struct xpc_partition *part)
                               partid);
         if (IS_ERR(kthread)) {
                 spin_lock_irqsave(&part->act_lock, irq_flags);
-                part->act_state = XPC_P_INACTIVE;
+                part->act_state = XPC_P_AS_INACTIVE;
                 XPC_SET_REASON(part, xpCloneKThreadFailed, __LINE__);
                 spin_unlock_irqrestore(&part->act_lock, irq_flags);
         }
 }
 
-/*
- * Handle the receipt of a SGI_XPC_NOTIFY IRQ by seeing whether the specified
- * partition actually sent it. Since SGI_XPC_NOTIFY IRQs may be shared by more
- * than one partition, we use an AMO_t structure per partition to indicate
- * whether a partition has sent an IPI or not.  If it has, then wake up the
- * associated kthread to handle it.
- *
- * All SGI_XPC_NOTIFY IRQs received by XPC are the result of IPIs sent by XPC
- * running on other partitions.
- *
- * Noteworthy Arguments:
- *
- *      irq - Interrupt ReQuest number. NOT USED.
- *
- *      dev_id - partid of IPI's potential sender.
- */
-irqreturn_t
-xpc_notify_IRQ_handler(int irq, void *dev_id)
-{
-        short partid = (short)(u64)dev_id;
-        struct xpc_partition *part = &xpc_partitions[partid];
-
-        DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS);
-
-        if (xpc_part_ref(part)) {
-                xpc_check_for_channel_activity(part);
-
-                xpc_part_deref(part);
-        }
-        return IRQ_HANDLED;
-}
-
-/*
- * Check to see if xpc_notify_IRQ_handler() dropped any IPIs on the floor
- * because the write to their associated IPI amo completed after the IRQ/IPI
- * was received.
- */
-void
-xpc_dropped_IPI_check(struct xpc_partition *part)
-{
-        if (xpc_part_ref(part)) {
-                xpc_check_for_channel_activity(part);
-
-                part->dropped_IPI_timer.expires = jiffies +
-                    XPC_P_DROPPED_IPI_WAIT;
-                add_timer(&part->dropped_IPI_timer);
-                xpc_part_deref(part);
-        }
-}
-
 void
 xpc_activate_kthreads(struct xpc_channel *ch, int needed)
 {
@@ -617,9 +715,9 @@ xpc_kthread_waitmsgs(struct xpc_partition *part, struct xpc_channel *ch)
         do {
                 /* deliver messages to their intended recipients */
 
-                while (ch->w_local_GP.get < ch->w_remote_GP.put &&
+                while (xpc_n_of_deliverable_payloads(ch) > 0 &&
                        !(ch->flags & XPC_C_DISCONNECTING)) {
-                        xpc_deliver_msg(ch);
+                        xpc_deliver_payload(ch);
                 }
 
                 if (atomic_inc_return(&ch->kthreads_idle) >
@@ -633,7 +731,7 @@ xpc_kthread_waitmsgs(struct xpc_partition *part, struct xpc_channel *ch)
                         "wait_event_interruptible_exclusive()\n");
 
                 (void)wait_event_interruptible_exclusive(ch->idle_wq,
-                                (ch->w_local_GP.get < ch->w_remote_GP.put ||
+                                (xpc_n_of_deliverable_payloads(ch) > 0 ||
                                  (ch->flags & XPC_C_DISCONNECTING)));
 
                 atomic_dec(&ch->kthreads_idle);
@@ -678,7 +776,7 @@ xpc_kthread_start(void *args)
                          * additional kthreads to help deliver them. We only
                          * need one less than total #of messages to deliver.
                          */
-                        n_needed = ch->w_remote_GP.put - ch->w_local_GP.get - 1;
+                        n_needed = xpc_n_of_deliverable_payloads(ch) - 1;
                         if (n_needed > 0 && !(ch->flags & XPC_C_DISCONNECTING))
                                 xpc_activate_kthreads(ch, n_needed);
 
@@ -704,11 +802,9 @@ xpc_kthread_start(void *args)
         }
         spin_unlock_irqrestore(&ch->lock, irq_flags);
 
-        if (atomic_dec_return(&ch->kthreads_assigned) == 0) {
-                if (atomic_dec_return(&part->nchannels_engaged) == 0) {
-                        xpc_mark_partition_disengaged(part);
-                        xpc_IPI_send_disengage(part);
-                }
+        if (atomic_dec_return(&ch->kthreads_assigned) == 0 &&
+            atomic_dec_return(&part->nchannels_engaged) == 0) {
+                xpc_indicate_partition_disengaged(part);
         }
 
         xpc_msgqueue_deref(ch);
@@ -759,9 +855,9 @@ xpc_create_kthreads(struct xpc_channel *ch, int needed,
                 } else if (ch->flags & XPC_C_DISCONNECTING) {
                         break;
 
-                } else if (atomic_inc_return(&ch->kthreads_assigned) == 1) {
-                        if (atomic_inc_return(&part->nchannels_engaged) == 1)
-                                xpc_mark_partition_engaged(part);
+                } else if (atomic_inc_return(&ch->kthreads_assigned) == 1 &&
+                           atomic_inc_return(&part->nchannels_engaged) == 1) {
+                                xpc_indicate_partition_engaged(part);
                 }
                 (void)xpc_part_ref(part);
                 xpc_msgqueue_ref(ch);
@@ -783,8 +879,7 @@ xpc_create_kthreads(struct xpc_channel *ch, int needed,
 
                         if (atomic_dec_return(&ch->kthreads_assigned) == 0 &&
                             atomic_dec_return(&part->nchannels_engaged) == 0) {
-                                xpc_mark_partition_disengaged(part);
-                                xpc_IPI_send_disengage(part);
+                                xpc_indicate_partition_disengaged(part);
                         }
                         xpc_msgqueue_deref(ch);
                         xpc_part_deref(part);
@@ -816,7 +911,7 @@ xpc_disconnect_wait(int ch_number)
         int wakeup_channel_mgr;
 
         /* now wait for all callouts to the caller's function to cease */
-        for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) {
+        for (partid = 0; partid < xp_max_npartitions; partid++) {
                 part = &xpc_partitions[partid];
 
                 if (!xpc_part_ref(part))
@@ -835,16 +930,15 @@ xpc_disconnect_wait(int ch_number)
                 DBUG_ON(!(ch->flags & XPC_C_DISCONNECTED));
                 wakeup_channel_mgr = 0;
 
-                if (ch->delayed_IPI_flags) {
-                        if (part->act_state != XPC_P_DEACTIVATING) {
-                                spin_lock(&part->IPI_lock);
-                                XPC_SET_IPI_FLAGS(part->local_IPI_amo,
-                                                  ch->number,
-                                                  ch->delayed_IPI_flags);
-                                spin_unlock(&part->IPI_lock);
+                if (ch->delayed_chctl_flags) {
+                        if (part->act_state != XPC_P_AS_DEACTIVATING) {
+                                spin_lock(&part->chctl_lock);
+                                part->chctl.flags[ch->number] |=
+                                    ch->delayed_chctl_flags;
+                                spin_unlock(&part->chctl_lock);
                                 wakeup_channel_mgr = 1;
                         }
-                        ch->delayed_IPI_flags = 0;
+                        ch->delayed_chctl_flags = 0;
                 }
 
                 ch->flags &= ~XPC_C_WDISCONNECT;
@@ -857,13 +951,63 @@ xpc_disconnect_wait(int ch_number)
         }
 }
 
+static int
+xpc_setup_partitions(void)
+{
+        short partid;
+        struct xpc_partition *part;
+
+        xpc_partitions = kzalloc(sizeof(struct xpc_partition) *
+                                 xp_max_npartitions, GFP_KERNEL);
+        if (xpc_partitions == NULL) {
+                dev_err(xpc_part, "can't get memory for partition structure\n");
+                return -ENOMEM;
+        }
+
+        /*
+         * The first few fields of each entry of xpc_partitions[] need to
+         * be initialized now so that calls to xpc_connect() and
+         * xpc_disconnect() can be made prior to the activation of any remote
+         * partition. NOTE THAT NONE OF THE OTHER FIELDS BELONGING TO THESE
+         * ENTRIES ARE MEANINGFUL UNTIL AFTER AN ENTRY'S CORRESPONDING
+         * PARTITION HAS BEEN ACTIVATED.
+         */
+        for (partid = 0; partid < xp_max_npartitions; partid++) {
+                part = &xpc_partitions[partid];
+
+                DBUG_ON((u64)part != L1_CACHE_ALIGN((u64)part));
+
+                part->activate_IRQ_rcvd = 0;
+                spin_lock_init(&part->act_lock);
+                part->act_state = XPC_P_AS_INACTIVE;
+                XPC_SET_REASON(part, 0, 0);
+
+                init_timer(&part->disengage_timer);
+                part->disengage_timer.function =
+                    xpc_timeout_partition_disengage;
+                part->disengage_timer.data = (unsigned long)part;
+
+                part->setup_state = XPC_P_SS_UNSET;
+                init_waitqueue_head(&part->teardown_wq);
+                atomic_set(&part->references, 0);
+        }
+
+        return xpc_setup_partitions_sn();
+}
+
+static void
+xpc_teardown_partitions(void)
+{
+        kfree(xpc_partitions);
+}
+
 static void
 xpc_do_exit(enum xp_retval reason)
 {
         short partid;
         int active_part_count, printed_waiting_msg = 0;
         struct xpc_partition *part;
-        unsigned long printmsg_time, disengage_request_timeout = 0;
+        unsigned long printmsg_time, disengage_timeout = 0;
 
         /* a 'rmmod XPC' and a 'reboot' cannot both end up here together */
         DBUG_ON(xpc_exiting == 1);
@@ -874,10 +1018,7 @@ xpc_do_exit(enum xp_retval reason)
          * the heartbeat checker thread in case it's sleeping.
          */
         xpc_exiting = 1;
-        wake_up_interruptible(&xpc_act_IRQ_wq);
-
-        /* ignore all incoming interrupts */
-        free_irq(SGI_XPC_ACTIVATE, NULL);
+        wake_up_interruptible(&xpc_activate_IRQ_wq);
 
         /* wait for the discovery thread to exit */
         wait_for_completion(&xpc_discovery_exited);
@@ -890,17 +1031,17 @@ xpc_do_exit(enum xp_retval reason)
 
         /* wait for all partitions to become inactive */
 
-        printmsg_time = jiffies + (XPC_DISENGAGE_PRINTMSG_INTERVAL * HZ);
-        xpc_disengage_request_timedout = 0;
+        printmsg_time = jiffies + (XPC_DEACTIVATE_PRINTMSG_INTERVAL * HZ);
+        xpc_disengage_timedout = 0;
 
         do {
                 active_part_count = 0;
 
-                for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) {
+                for (partid = 0; partid < xp_max_npartitions; partid++) {
                         part = &xpc_partitions[partid];
 
                         if (xpc_partition_disengaged(part) &&
-                            part->act_state == XPC_P_INACTIVE) {
+                            part->act_state == XPC_P_AS_INACTIVE) {
                                 continue;
                         }
 
@@ -908,36 +1049,32 @@ xpc_do_exit(enum xp_retval reason)
 
                         XPC_DEACTIVATE_PARTITION(part, reason);
 
-                        if (part->disengage_request_timeout >
-                            disengage_request_timeout) {
-                                disengage_request_timeout =
-                                    part->disengage_request_timeout;
-                        }
+                        if (part->disengage_timeout > disengage_timeout)
+                                disengage_timeout = part->disengage_timeout;
                 }
 
-                if (xpc_partition_engaged(-1UL)) {
-                        if (time_after(jiffies, printmsg_time)) {
+                if (xpc_any_partition_engaged()) {
+                        if (time_is_before_jiffies(printmsg_time)) {
                                 dev_info(xpc_part, "waiting for remote "
-                                         "partitions to disengage, timeout in "
-                                         "%ld seconds\n",
-                                         (disengage_request_timeout - jiffies)
-                                         / HZ);
+                                         "partitions to deactivate, timeout in "
+                                         "%ld seconds\n", (disengage_timeout -
+                                         jiffies) / HZ);
                                 printmsg_time = jiffies +
-                                    (XPC_DISENGAGE_PRINTMSG_INTERVAL * HZ);
+                                    (XPC_DEACTIVATE_PRINTMSG_INTERVAL * HZ);
                                 printed_waiting_msg = 1;
                         }
 
                 } else if (active_part_count > 0) {
                         if (printed_waiting_msg) {
                                 dev_info(xpc_part, "waiting for local partition"
-                                         " to disengage\n");
+                                         " to deactivate\n");
                                 printed_waiting_msg = 0;
                         }
 
                 } else {
-                        if (!xpc_disengage_request_timedout) {
+                        if (!xpc_disengage_timedout) {
                                 dev_info(xpc_part, "all partitions have "
-                                         "disengaged\n");
+                                         "deactivated\n");
                         }
                         break;
                 }
@@ -947,33 +1084,28 @@ xpc_do_exit(enum xp_retval reason)
 
         } while (1);
 
-        DBUG_ON(xpc_partition_engaged(-1UL));
+        DBUG_ON(xpc_any_partition_engaged());
+        DBUG_ON(xpc_any_hbs_allowed() != 0);
 
-        /* indicate to others that our reserved page is uninitialized */
-        xpc_rsvd_page->vars_pa = 0;
-
-        /* now it's time to eliminate our heartbeat */
-        del_timer_sync(&xpc_hb_timer);
-        DBUG_ON(xpc_vars->heartbeating_to_mask != 0);
+        xpc_teardown_rsvd_page();
 
         if (reason == xpUnloading) {
-                /* take ourselves off of the reboot_notifier_list */
-                (void)unregister_reboot_notifier(&xpc_reboot_notifier);
-
-                /* take ourselves off of the die_notifier list */
                 (void)unregister_die_notifier(&xpc_die_notifier);
+                (void)unregister_reboot_notifier(&xpc_reboot_notifier);
         }
 
-        /* close down protections for IPI operations */
-        xpc_restrict_IPI_ops();
-
         /* clear the interface to XPC's functions */
         xpc_clear_interface();
 
         if (xpc_sysctl)
                 unregister_sysctl_table(xpc_sysctl);
 
-        kfree(xpc_remote_copy_buffer_base);
+        xpc_teardown_partitions();
+
+        if (is_shub())
+                xpc_exit_sn2();
+        else
+                xpc_exit_uv();
 }
 
 /*
@@ -1003,60 +1135,57 @@ xpc_system_reboot(struct notifier_block *nb, unsigned long event, void *unused)
 }
 
 /*
- * Notify other partitions to disengage from all references to our memory.
+ * Notify other partitions to deactivate from us by first disengaging from all
+ * references to our memory.
  */
 static void
-xpc_die_disengage(void)
+xpc_die_deactivate(void)
 {
         struct xpc_partition *part;
         short partid;
-        unsigned long engaged;
-        long time, printmsg_time, disengage_request_timeout;
+        int any_engaged;
+        long keep_waiting;
+        long wait_to_print;
 
         /* keep xpc_hb_checker thread from doing anything (just in case) */
         xpc_exiting = 1;
 
-        xpc_vars->heartbeating_to_mask = 0;     /* indicate we're deactivated */
+        xpc_disallow_all_hbs(); /*indicate we're deactivated */
 
-        for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) {
+        for (partid = 0; partid < xp_max_npartitions; partid++) {
                 part = &xpc_partitions[partid];
 
-                if (!XPC_SUPPORTS_DISENGAGE_REQUEST(part->
-                    remote_vars_version)) {
-
-                        /* just in case it was left set by an earlier XPC */
-                        xpc_clear_partition_engaged(1UL << partid);
-                        continue;
-                }
-
-                if (xpc_partition_engaged(1UL << partid) ||
-                    part->act_state != XPC_P_INACTIVE) {
-                        xpc_request_partition_disengage(part);
-                        xpc_mark_partition_disengaged(part);
-                        xpc_IPI_send_disengage(part);
+                if (xpc_partition_engaged(partid) ||
+                    part->act_state != XPC_P_AS_INACTIVE) {
+                        xpc_request_partition_deactivation(part);
+                        xpc_indicate_partition_disengaged(part);
                 }
         }
 
-        time = rtc_time();
-        printmsg_time = time +
-            (XPC_DISENGAGE_PRINTMSG_INTERVAL * sn_rtc_cycles_per_second);
-        disengage_request_timeout = time +
-            (xpc_disengage_request_timelimit * sn_rtc_cycles_per_second);
-
-        /* wait for all other partitions to disengage from us */
+        /*
+         * Though we requested that all other partitions deactivate from us,
+         * we only wait until they've all disengaged or we've reached the
+         * defined timelimit.
+         *
+         * Given that one iteration through the following while-loop takes
+         * approximately 200 microseconds, calculate the #of loops to take
+         * before bailing and the #of loops before printing a waiting message.
+         */
+        keep_waiting = xpc_disengage_timelimit * 1000 * 5;
+        wait_to_print = XPC_DEACTIVATE_PRINTMSG_INTERVAL * 1000 * 5;
 
         while (1) {
-                engaged = xpc_partition_engaged(-1UL);
-                if (!engaged) {
-                        dev_info(xpc_part, "all partitions have disengaged\n");
+                any_engaged = xpc_any_partition_engaged();
+                if (!any_engaged) {
+                        dev_info(xpc_part, "all partitions have deactivated\n");
                         break;
                 }
 
-                time = rtc_time();
-                if (time >= disengage_request_timeout) {
-                        for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) {
-                                if (engaged & (1UL << partid)) {
-                                        dev_info(xpc_part, "disengage from "
+                if (!keep_waiting--) {
+                        for (partid = 0; partid < xp_max_npartitions;
+                             partid++) {
+                                if (xpc_partition_engaged(partid)) {
+                                        dev_info(xpc_part, "deactivate from "
                                                  "remote partition %d timed "
                                                  "out\n", partid);
                                 }
@@ -1064,15 +1193,15 @@ xpc_die_disengage(void)
                         break;
                 }
 
-                if (time >= printmsg_time) {
+                if (!wait_to_print--) {
                         dev_info(xpc_part, "waiting for remote partitions to "
-                                 "disengage, timeout in %ld seconds\n",
-                                 (disengage_request_timeout - time) /
-                                 sn_rtc_cycles_per_second);
-                        printmsg_time = time +
-                            (XPC_DISENGAGE_PRINTMSG_INTERVAL *
-                             sn_rtc_cycles_per_second);
+                                 "deactivate, timeout in %ld seconds\n",
+                                 keep_waiting / (1000 * 5));
+                        wait_to_print = XPC_DEACTIVATE_PRINTMSG_INTERVAL *
+                            1000 * 5;
                 }
+
+                udelay(200);
         }
 }
 
@@ -1087,10 +1216,11 @@ xpc_die_disengage(void)
 static int
 xpc_system_die(struct notifier_block *nb, unsigned long event, void *unused)
 {
+#ifdef CONFIG_IA64              /* !!! temporary kludge */
         switch (event) {
         case DIE_MACHINE_RESTART:
         case DIE_MACHINE_HALT:
-                xpc_die_disengage();
+                xpc_die_deactivate();
                 break;
 
         case DIE_KDEBUG_ENTER:
@@ -1101,8 +1231,7 @@ xpc_system_die(struct notifier_block *nb, unsigned long event, void *unused)
                 /* fall through */
         case DIE_MCA_MONARCH_ENTER:
         case DIE_INIT_MONARCH_ENTER:
-                xpc_vars->heartbeat++;
-                xpc_vars->heartbeat_offline = 1;
+                xpc_offline_heartbeat();
                 break;
 
         case DIE_KDEBUG_LEAVE:
@@ -1113,10 +1242,12 @@ xpc_system_die(struct notifier_block *nb, unsigned long event, void *unused)
                 /* fall through */
         case DIE_MCA_MONARCH_LEAVE:
         case DIE_INIT_MONARCH_LEAVE:
-                xpc_vars->heartbeat++;
-                xpc_vars->heartbeat_offline = 0;
+                xpc_online_heartbeat();
                 break;
         }
+#else
+        xpc_die_deactivate();
+#endif
 
         return NOTIFY_DONE;
 }
@@ -1125,105 +1256,52 @@ int __init
 xpc_init(void)
 {
         int ret;
-        short partid;
-        struct xpc_partition *part;
         struct task_struct *kthread;
-        size_t buf_size;
-
-        if (!ia64_platform_is("sn2"))
-                return -ENODEV;
-
-        buf_size = max(XPC_RP_VARS_SIZE,
-                       XPC_RP_HEADER_SIZE + XP_NASID_MASK_BYTES);
-        xpc_remote_copy_buffer = xpc_kmalloc_cacheline_aligned(buf_size,
-                                                               GFP_KERNEL,
-                                                  &xpc_remote_copy_buffer_base);
-        if (xpc_remote_copy_buffer == NULL)
-                return -ENOMEM;
 
         snprintf(xpc_part->bus_id, BUS_ID_SIZE, "part");
         snprintf(xpc_chan->bus_id, BUS_ID_SIZE, "chan");
 
-        xpc_sysctl = register_sysctl_table(xpc_sys_dir);
-
-        /*
-         * The first few fields of each entry of xpc_partitions[] need to
-         * be initialized now so that calls to xpc_connect() and
-         * xpc_disconnect() can be made prior to the activation of any remote
-         * partition. NOTE THAT NONE OF THE OTHER FIELDS BELONGING TO THESE
-         * ENTRIES ARE MEANINGFUL UNTIL AFTER AN ENTRY'S CORRESPONDING
-         * PARTITION HAS BEEN ACTIVATED.
-         */
-        for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) {
-                part = &xpc_partitions[partid];
-
-                DBUG_ON((u64)part != L1_CACHE_ALIGN((u64)part));
-
-                part->act_IRQ_rcvd = 0;
-                spin_lock_init(&part->act_lock);
-                part->act_state = XPC_P_INACTIVE;
-                XPC_SET_REASON(part, 0, 0);
+        if (is_shub()) {
+                /*
+                 * The ia64-sn2 architecture supports at most 64 partitions.
+                 * And the inability to unregister remote amos restricts us
+                 * further to only support exactly 64 partitions on this
+                 * architecture, no less.
+                 */
+                if (xp_max_npartitions != 64) {
+                        dev_err(xpc_part, "max #of partitions not set to 64\n");
+                        ret = -EINVAL;
+                } else {
+                        ret = xpc_init_sn2();
+                }
 
-                init_timer(&part->disengage_request_timer);
-                part->disengage_request_timer.function =
-                    xpc_timeout_partition_disengage_request;
-                part->disengage_request_timer.data = (unsigned long)part;
+        } else if (is_uv()) {
+                ret = xpc_init_uv();
 
-                part->setup_state = XPC_P_UNSET;
-                init_waitqueue_head(&part->teardown_wq);
-                atomic_set(&part->references, 0);
+        } else {
+                ret = -ENODEV;
         }
 
-        /*
-         * Open up protections for IPI operations (and AMO operations on
-         * Shub 1.1 systems).
-         */
-        xpc_allow_IPI_ops();
-
-        /*
-         * Interrupts being processed will increment this atomic variable and
-         * awaken the heartbeat thread which will process the interrupts.
-         */
-        atomic_set(&xpc_act_IRQ_rcvd, 0);
+        if (ret != 0)
+                return ret;
 
-        /*
-         * This is safe to do before the xpc_hb_checker thread has started
-         * because the handler releases a wait queue.  If an interrupt is
-         * received before the thread is waiting, it will not go to sleep,
-         * but rather immediately process the interrupt.
-         */
-        ret = request_irq(SGI_XPC_ACTIVATE, xpc_act_IRQ_handler, 0,
-                          "xpc hb", NULL);
+        ret = xpc_setup_partitions();
         if (ret != 0) {
-                dev_err(xpc_part, "can't register ACTIVATE IRQ handler, "
-                        "errno=%d\n", -ret);
-
-                xpc_restrict_IPI_ops();
-
-                if (xpc_sysctl)
-                        unregister_sysctl_table(xpc_sysctl);
-
-                kfree(xpc_remote_copy_buffer_base);
-                return -EBUSY;
+                dev_err(xpc_part, "can't get memory for partition structure\n");
+                goto out_1;
         }
 
+        xpc_sysctl = register_sysctl_table(xpc_sys_dir);
+
         /*
          * Fill the partition reserved page with the information needed by
          * other partitions to discover we are alive and establish initial
          * communications.
          */
-        xpc_rsvd_page = xpc_rsvd_page_init();
-        if (xpc_rsvd_page == NULL) {
-                dev_err(xpc_part, "could not setup our reserved page\n");
-
-                free_irq(SGI_XPC_ACTIVATE, NULL);
-                xpc_restrict_IPI_ops();
-
-                if (xpc_sysctl)
-                        unregister_sysctl_table(xpc_sysctl);
-
-                kfree(xpc_remote_copy_buffer_base);
-                return -EBUSY;
+        ret = xpc_setup_rsvd_page();
+        if (ret != 0) {
+                dev_err(xpc_part, "can't setup our reserved page\n");
+                goto out_2;
         }
 
         /* add ourselves to the reboot_notifier_list */
@@ -1236,9 +1314,6 @@ xpc_init(void)
         if (ret != 0)
                 dev_warn(xpc_part, "can't register die notifier\n");
 
-        init_timer(&xpc_hb_timer);
-        xpc_hb_timer.function = xpc_hb_beater;
-
         /*
          * The real work-horse behind xpc.  This processes incoming
          * interrupts and monitors remote heartbeats.
@@ -1246,25 +1321,8 @@ xpc_init(void)
         kthread = kthread_run(xpc_hb_checker, NULL, XPC_HB_CHECK_THREAD_NAME);
         if (IS_ERR(kthread)) {
                 dev_err(xpc_part, "failed while forking hb check thread\n");
-
-                /* indicate to others that our reserved page is uninitialized */
-                xpc_rsvd_page->vars_pa = 0;
-
-                /* take ourselves off of the reboot_notifier_list */
-                (void)unregister_reboot_notifier(&xpc_reboot_notifier);
-
-                /* take ourselves off of the die_notifier list */
-                (void)unregister_die_notifier(&xpc_die_notifier);
-
-                del_timer_sync(&xpc_hb_timer);
-                free_irq(SGI_XPC_ACTIVATE, NULL);
-                xpc_restrict_IPI_ops();
-
-                if (xpc_sysctl)
-                        unregister_sysctl_table(xpc_sysctl);
-
-                kfree(xpc_remote_copy_buffer_base);
-                return -EBUSY;
+                ret = -EBUSY;
+                goto out_3;
         }
 
         /*
@@ -1286,11 +1344,28 @@ xpc_init(void)
 
         /* set the interface to point at XPC's functions */
         xpc_set_interface(xpc_initiate_connect, xpc_initiate_disconnect,
-                          xpc_initiate_allocate, xpc_initiate_send,
-                          xpc_initiate_send_notify, xpc_initiate_received,
-                          xpc_initiate_partid_to_nasids);
+                          xpc_initiate_send, xpc_initiate_send_notify,
+                          xpc_initiate_received, xpc_initiate_partid_to_nasids);
 
         return 0;
+
+        /* initialization was not successful */
+out_3:
+        xpc_teardown_rsvd_page();
+
+        (void)unregister_die_notifier(&xpc_die_notifier);
+        (void)unregister_reboot_notifier(&xpc_reboot_notifier);
+out_2:
+        if (xpc_sysctl)
+                unregister_sysctl_table(xpc_sysctl);
+
+        xpc_teardown_partitions();
+out_1:
+        if (is_shub())
+                xpc_exit_sn2();
+        else
+                xpc_exit_uv();
+        return ret;
 }
 
 module_init(xpc_init);
@@ -1315,9 +1390,9 @@ module_param(xpc_hb_check_interval, int, 0);
 MODULE_PARM_DESC(xpc_hb_check_interval, "Number of seconds between "
                  "heartbeat checks.");
 
-module_param(xpc_disengage_request_timelimit, int, 0);
-MODULE_PARM_DESC(xpc_disengage_request_timelimit, "Number of seconds to wait "
-                 "for disengage request to complete.");
+module_param(xpc_disengage_timelimit, int, 0);
+MODULE_PARM_DESC(xpc_disengage_timelimit, "Number of seconds to wait "
+                 "for disengage to complete.");
 
 module_param(xpc_kdebug_ignore, int, 0);
 MODULE_PARM_DESC(xpc_kdebug_ignore, "Should lack of heartbeat be ignored by "
diff --git a/drivers/misc/sgi-xp/xpc_partition.c b/drivers/misc/sgi-xp/xpc_partition.c
index 7dd4b5812c42..6722f6fe4dc7 100644
--- a/drivers/misc/sgi-xp/xpc_partition.c
+++ b/drivers/misc/sgi-xp/xpc_partition.c
@@ -15,57 +15,22 @@
  *
  */
 
-#include <linux/kernel.h>
-#include <linux/sysctl.h>
-#include <linux/cache.h>
-#include <linux/mmzone.h>
-#include <linux/nodemask.h>
-#include <asm/uncached.h>
-#include <asm/sn/bte.h>
-#include <asm/sn/intr.h>
-#include <asm/sn/sn_sal.h>
-#include <asm/sn/nodepda.h>
-#include <asm/sn/addrs.h>
+#include <linux/device.h>
+#include <linux/hardirq.h>
 #include "xpc.h"
 
 /* XPC is exiting flag */
 int xpc_exiting;
 
-/* SH_IPI_ACCESS shub register value on startup */
-static u64 xpc_sh1_IPI_access;
-static u64 xpc_sh2_IPI_access0;
-static u64 xpc_sh2_IPI_access1;
-static u64 xpc_sh2_IPI_access2;
-static u64 xpc_sh2_IPI_access3;
-
-/* original protection values for each node */
-u64 xpc_prot_vec[MAX_NUMNODES];
-
 /* this partition's reserved page pointers */
 struct xpc_rsvd_page *xpc_rsvd_page;
-static u64 *xpc_part_nasids;
-static u64 *xpc_mach_nasids;
-struct xpc_vars *xpc_vars;
-struct xpc_vars_part *xpc_vars_part;
+static unsigned long *xpc_part_nasids;
+unsigned long *xpc_mach_nasids;
 
-static int xp_nasid_mask_bytes; /* actual size in bytes of nasid mask */
-static int xp_nasid_mask_words; /* actual size in words of nasid mask */
-
-/*
- * For performance reasons, each entry of xpc_partitions[] is cacheline
- * aligned. And xpc_partitions[] is padded with an additional entry at the
- * end so that the last legitimate entry doesn't share its cacheline with
- * another variable.
- */
-struct xpc_partition xpc_partitions[XP_MAX_PARTITIONS + 1];
+static int xpc_nasid_mask_nbytes;       /* #of bytes in nasid mask */
+int xpc_nasid_mask_nlongs;      /* #of longs in nasid mask */
 
-/*
- * Generic buffer used to store a local copy of portions of a remote
- * partition's reserved page (either its header and part_nasids mask,
- * or its vars).
- */
-char *xpc_remote_copy_buffer;
-void *xpc_remote_copy_buffer_base;
+struct xpc_partition *xpc_partitions;
 
 /*
  * Guarantee that the kmalloc'd memory is cacheline aligned.
@@ -95,56 +60,59 @@ xpc_kmalloc_cacheline_aligned(size_t size, gfp_t flags, void **base)
  * Given a nasid, get the physical address of the  partition's reserved page
  * for that nasid. This function returns 0 on any error.
  */
-static u64
+static unsigned long
 xpc_get_rsvd_page_pa(int nasid)
 {
-        bte_result_t bte_res;
-        s64 status;
+        enum xp_retval ret;
         u64 cookie = 0;
-        u64 rp_pa = nasid;      /* seed with nasid */
-        u64 len = 0;
-        u64 buf = buf;
-        u64 buf_len = 0;
+        unsigned long rp_pa = nasid;    /* seed with nasid */
+        size_t len = 0;
+        size_t buf_len = 0;
+        void *buf = buf;
         void *buf_base = NULL;
 
         while (1) {
 
-                status = sn_partition_reserved_page_pa(buf, &cookie, &rp_pa,
-                                                       &len);
+                /* !!! rp_pa will need to be _gpa on UV.
+                 * ??? So do we save it into the architecture specific parts
+                 * ??? of the xpc_partition structure? Do we rename this
+                 * ??? function or have two versions? Rename rp_pa for UV to
+                 * ??? rp_gpa?
+                 */
+                ret = xpc_get_partition_rsvd_page_pa(buf, &cookie, &rp_pa,
+                                                     &len);
 
-                dev_dbg(xpc_part, "SAL returned with status=%li, cookie="
-                        "0x%016lx, address=0x%016lx, len=0x%016lx\n",
-                        status, cookie, rp_pa, len);
+                dev_dbg(xpc_part, "SAL returned with ret=%d, cookie=0x%016lx, "
+                        "address=0x%016lx, len=0x%016lx\n", ret,
+                        (unsigned long)cookie, rp_pa, len);
 
-                if (status != SALRET_MORE_PASSES)
+                if (ret != xpNeedMoreInfo)
                         break;
 
+                /* !!! L1_CACHE_ALIGN() is only a sn2-bte_copy requirement */
                 if (L1_CACHE_ALIGN(len) > buf_len) {
                         kfree(buf_base);
                         buf_len = L1_CACHE_ALIGN(len);
-                        buf = (u64)xpc_kmalloc_cacheline_aligned(buf_len,
-                                                                 GFP_KERNEL,
-                                                                 &buf_base);
+                        buf = xpc_kmalloc_cacheline_aligned(buf_len, GFP_KERNEL,
+                                                            &buf_base);
                         if (buf_base == NULL) {
                                 dev_err(xpc_part, "unable to kmalloc "
                                         "len=0x%016lx\n", buf_len);
-                                status = SALRET_ERROR;
+                                ret = xpNoMemory;
                                 break;
                         }
                 }
 
-                bte_res = xp_bte_copy(rp_pa, buf, buf_len,
-                                      (BTE_NOTIFY | BTE_WACQUIRE), NULL);
-                if (bte_res != BTE_SUCCESS) {
-                        dev_dbg(xpc_part, "xp_bte_copy failed %i\n", bte_res);
-                        status = SALRET_ERROR;
+                ret = xp_remote_memcpy(xp_pa(buf), rp_pa, buf_len);
+                if (ret != xpSuccess) {
+                        dev_dbg(xpc_part, "xp_remote_memcpy failed %d\n", ret);
                         break;
                 }
         }
 
         kfree(buf_base);
 
-        if (status != SALRET_OK)
+        if (ret != xpSuccess)
                 rp_pa = 0;
 
         dev_dbg(xpc_part, "reserved page at phys address 0x%016lx\n", rp_pa);
@@ -156,300 +124,77 @@ xpc_get_rsvd_page_pa(int nasid)
  * other partitions to discover we are alive and establish initial
  * communications.
  */
-struct xpc_rsvd_page *
-xpc_rsvd_page_init(void)
+int
+xpc_setup_rsvd_page(void)
 {
+        int ret;
         struct xpc_rsvd_page *rp;
-        AMO_t *amos_page;
-        u64 rp_pa, nasid_array = 0;
-        int i, ret;
+        unsigned long rp_pa;
+        unsigned long new_ts_jiffies;
 
         /* get the local reserved page's address */
 
         preempt_disable();
-        rp_pa = xpc_get_rsvd_page_pa(cpuid_to_nasid(smp_processor_id()));
+        rp_pa = xpc_get_rsvd_page_pa(xp_cpu_to_nasid(smp_processor_id()));
         preempt_enable();
         if (rp_pa == 0) {
                 dev_err(xpc_part, "SAL failed to locate the reserved page\n");
-                return NULL;
+                return -ESRCH;
         }
         rp = (struct xpc_rsvd_page *)__va(rp_pa);
 
-        if (rp->partid != sn_partition_id) {
-                dev_err(xpc_part, "the reserved page's partid of %d should be "
-                        "%d\n", rp->partid, sn_partition_id);
-                return NULL;
+        if (rp->SAL_version < 3) {
+                /* SAL_versions < 3 had a SAL_partid defined as a u8 */
+                rp->SAL_partid &= 0xff;
+        }
+        BUG_ON(rp->SAL_partid != xp_partition_id);
+
+        if (rp->SAL_partid < 0 || rp->SAL_partid >= xp_max_npartitions) {
+                dev_err(xpc_part, "the reserved page's partid of %d is outside "
+                        "supported range (< 0 || >= %d)\n", rp->SAL_partid,
+                        xp_max_npartitions);
+                return -EINVAL;
         }
 
         rp->version = XPC_RP_VERSION;
+        rp->max_npartitions = xp_max_npartitions;
 
         /* establish the actual sizes of the nasid masks */
         if (rp->SAL_version == 1) {
                 /* SAL_version 1 didn't set the nasids_size field */
-                rp->nasids_size = 128;
+                rp->SAL_nasids_size = 128;
         }
-        xp_nasid_mask_bytes = rp->nasids_size;
-        xp_nasid_mask_words = xp_nasid_mask_bytes / 8;
+        xpc_nasid_mask_nbytes = rp->SAL_nasids_size;
+        xpc_nasid_mask_nlongs = BITS_TO_LONGS(rp->SAL_nasids_size *
+                                              BITS_PER_BYTE);
 
         /* setup the pointers to the various items in the reserved page */
         xpc_part_nasids = XPC_RP_PART_NASIDS(rp);
         xpc_mach_nasids = XPC_RP_MACH_NASIDS(rp);
-        xpc_vars = XPC_RP_VARS(rp);
-        xpc_vars_part = XPC_RP_VARS_PART(rp);
-
-        /*
-         * Before clearing xpc_vars, see if a page of AMOs had been previously
-         * allocated. If not we'll need to allocate one and set permissions
-         * so that cross-partition AMOs are allowed.
-         *
-         * The allocated AMO page needs MCA reporting to remain disabled after
-         * XPC has unloaded.  To make this work, we keep a copy of the pointer
-         * to this page (i.e., amos_page) in the struct xpc_vars structure,
-         * which is pointed to by the reserved page, and re-use that saved copy
-         * on subsequent loads of XPC. This AMO page is never freed, and its
-         * memory protections are never restricted.
-         */
-        amos_page = xpc_vars->amos_page;
-        if (amos_page == NULL) {
-                amos_page = (AMO_t *)TO_AMO(uncached_alloc_page(0, 1));
-                if (amos_page == NULL) {
-                        dev_err(xpc_part, "can't allocate page of AMOs\n");
-                        return NULL;
-                }
-
-                /*
-                 * Open up AMO-R/W to cpu.  This is done for Shub 1.1 systems
-                 * when xpc_allow_IPI_ops() is called via xpc_hb_init().
-                 */
-                if (!enable_shub_wars_1_1()) {
-                        ret = sn_change_memprotect(ia64_tpa((u64)amos_page),
-                                                   PAGE_SIZE,
-                                                   SN_MEMPROT_ACCESS_CLASS_1,
-                                                   &nasid_array);
-                        if (ret != 0) {
-                                dev_err(xpc_part, "can't change memory "
-                                        "protections\n");
-                                uncached_free_page(__IA64_UNCACHED_OFFSET |
-                                                   TO_PHYS((u64)amos_page), 1);
-                                return NULL;
-                        }
-                }
-        } else if (!IS_AMO_ADDRESS((u64)amos_page)) {
-                /*
-                 * EFI's XPBOOT can also set amos_page in the reserved page,
-                 * but it happens to leave it as an uncached physical address
-                 * and we need it to be an uncached virtual, so we'll have to
-                 * convert it.
-                 */
-                if (!IS_AMO_PHYS_ADDRESS((u64)amos_page)) {
-                        dev_err(xpc_part, "previously used amos_page address "
-                                "is bad = 0x%p\n", (void *)amos_page);
-                        return NULL;
-                }
-                amos_page = (AMO_t *)TO_AMO((u64)amos_page);
-        }
-
-        /* clear xpc_vars */
-        memset(xpc_vars, 0, sizeof(struct xpc_vars));
-
-        xpc_vars->version = XPC_V_VERSION;
-        xpc_vars->act_nasid = cpuid_to_nasid(0);
-        xpc_vars->act_phys_cpuid = cpu_physical_id(0);
-        xpc_vars->vars_part_pa = __pa(xpc_vars_part);
-        xpc_vars->amos_page_pa = ia64_tpa((u64)amos_page);
-        xpc_vars->amos_page = amos_page;        /* save for next load of XPC */
-
-        /* clear xpc_vars_part */
-        memset((u64 *)xpc_vars_part, 0, sizeof(struct xpc_vars_part) *
-               XP_MAX_PARTITIONS);
-
-        /* initialize the activate IRQ related AMO variables */
-        for (i = 0; i < xp_nasid_mask_words; i++)
-                (void)xpc_IPI_init(XPC_ACTIVATE_IRQ_AMOS + i);
-
-        /* initialize the engaged remote partitions related AMO variables */
-        (void)xpc_IPI_init(XPC_ENGAGED_PARTITIONS_AMO);
-        (void)xpc_IPI_init(XPC_DISENGAGE_REQUEST_AMO);
 
-        /* timestamp of when reserved page was setup by XPC */
-        rp->stamp = CURRENT_TIME;
+        ret = xpc_setup_rsvd_page_sn(rp);
+        if (ret != 0)
+                return ret;
 
         /*
+         * Set timestamp of when reserved page was setup by XPC.
          * This signifies to the remote partition that our reserved
          * page is initialized.
          */
-        rp->vars_pa = __pa(xpc_vars);
+        new_ts_jiffies = jiffies;
+        if (new_ts_jiffies == 0 || new_ts_jiffies == rp->ts_jiffies)
+                new_ts_jiffies++;
+        rp->ts_jiffies = new_ts_jiffies;
 
-        return rp;
+        xpc_rsvd_page = rp;
+        return 0;
 }
 
-/*
- * Change protections to allow IPI operations (and AMO operations on
- * Shub 1.1 systems).
- */
 void
-xpc_allow_IPI_ops(void)
+xpc_teardown_rsvd_page(void)
 {
-        int node;
-        int nasid;
-
-        /* >>> Change SH_IPI_ACCESS code to use SAL call once it is available */
-
-        if (is_shub2()) {
-                xpc_sh2_IPI_access0 =
-                    (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS0));
-                xpc_sh2_IPI_access1 =
-                    (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS1));
-                xpc_sh2_IPI_access2 =
-                    (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS2));
-                xpc_sh2_IPI_access3 =
-                    (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS3));
-
-                for_each_online_node(node) {
-                        nasid = cnodeid_to_nasid(node);
-                        HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS0),
-                              -1UL);
-                        HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS1),
-                              -1UL);
-                        HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS2),
-                              -1UL);
-                        HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS3),
-                              -1UL);
-                }
-
-        } else {
-                xpc_sh1_IPI_access =
-                    (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH1_IPI_ACCESS));
-
-                for_each_online_node(node) {
-                        nasid = cnodeid_to_nasid(node);
-                        HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH1_IPI_ACCESS),
-                              -1UL);
-
-                        /*
-                         * Since the BIST collides with memory operations on
-                         * SHUB 1.1 sn_change_memprotect() cannot be used.
-                         */
-                        if (enable_shub_wars_1_1()) {
-                                /* open up everything */
-                                xpc_prot_vec[node] = (u64)HUB_L((u64 *)
-                                                                GLOBAL_MMR_ADDR
-                                                                (nasid,
-                                                  SH1_MD_DQLP_MMR_DIR_PRIVEC0));
-                                HUB_S((u64 *)
-                                      GLOBAL_MMR_ADDR(nasid,
-                                                   SH1_MD_DQLP_MMR_DIR_PRIVEC0),
-                                      -1UL);
-                                HUB_S((u64 *)
-                                      GLOBAL_MMR_ADDR(nasid,
-                                                   SH1_MD_DQRP_MMR_DIR_PRIVEC0),
-                                      -1UL);
-                        }
-                }
-        }
-}
-
-/*
- * Restrict protections to disallow IPI operations (and AMO operations on
- * Shub 1.1 systems).
- */
-void
-xpc_restrict_IPI_ops(void)
-{
-        int node;
-        int nasid;
-
-        /* >>> Change SH_IPI_ACCESS code to use SAL call once it is available */
-
-        if (is_shub2()) {
-
-                for_each_online_node(node) {
-                        nasid = cnodeid_to_nasid(node);
-                        HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS0),
-                              xpc_sh2_IPI_access0);
-                        HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS1),
-                              xpc_sh2_IPI_access1);
-                        HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS2),
-                              xpc_sh2_IPI_access2);
-                        HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS3),
-                              xpc_sh2_IPI_access3);
-                }
-
-        } else {
-
-                for_each_online_node(node) {
-                        nasid = cnodeid_to_nasid(node);
-                        HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH1_IPI_ACCESS),
-                              xpc_sh1_IPI_access);
-
-                        if (enable_shub_wars_1_1()) {
-                                HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid,
-                                                   SH1_MD_DQLP_MMR_DIR_PRIVEC0),
-                                      xpc_prot_vec[node]);
-                                HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid,
-                                                   SH1_MD_DQRP_MMR_DIR_PRIVEC0),
-                                      xpc_prot_vec[node]);
-                        }
-                }
-        }
-}
-
-/*
- * At periodic intervals, scan through all active partitions and ensure
- * their heartbeat is still active.  If not, the partition is deactivated.
- */
-void
-xpc_check_remote_hb(void)
-{
-        struct xpc_vars *remote_vars;
-        struct xpc_partition *part;
-        short partid;
-        bte_result_t bres;
-
-        remote_vars = (struct xpc_vars *)xpc_remote_copy_buffer;
-
-        for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) {
-
-                if (xpc_exiting)
-                        break;
-
-                if (partid == sn_partition_id)
-                        continue;
-
-                part = &xpc_partitions[partid];
-
-                if (part->act_state == XPC_P_INACTIVE ||
-                    part->act_state == XPC_P_DEACTIVATING) {
-                        continue;
-                }
-
-                /* pull the remote_hb cache line */
-                bres = xp_bte_copy(part->remote_vars_pa,
-                                   (u64)remote_vars,
-                                   XPC_RP_VARS_SIZE,
-                                   (BTE_NOTIFY | BTE_WACQUIRE), NULL);
-                if (bres != BTE_SUCCESS) {
-                        XPC_DEACTIVATE_PARTITION(part,
-                                                 xpc_map_bte_errors(bres));
-                        continue;
-                }
-
-                dev_dbg(xpc_part, "partid = %d, heartbeat = %ld, last_heartbeat"
-                        " = %ld, heartbeat_offline = %ld, HB_mask = 0x%lx\n",
-                        partid, remote_vars->heartbeat, part->last_heartbeat,
-                        remote_vars->heartbeat_offline,
-                        remote_vars->heartbeating_to_mask);
-
-                if (((remote_vars->heartbeat == part->last_heartbeat) &&
-                     (remote_vars->heartbeat_offline == 0)) ||
-                    !xpc_hb_allowed(sn_partition_id, remote_vars)) {
-
-                        XPC_DEACTIVATE_PARTITION(part, xpNoHeartbeat);
-                        continue;
-                }
-
-                part->last_heartbeat = remote_vars->heartbeat;
-        }
+        /* a zero timestamp indicates our rsvd page is not initialized */
+        xpc_rsvd_page->ts_jiffies = 0;
 }
 
 /*
@@ -459,11 +204,12 @@ xpc_check_remote_hb(void)
  * is large enough to contain a copy of their reserved page header and
  * part_nasids mask.
  */
-static enum xp_retval
-xpc_get_remote_rp(int nasid, u64 *discovered_nasids,
-                  struct xpc_rsvd_page *remote_rp, u64 *remote_rp_pa)
+enum xp_retval
+xpc_get_remote_rp(int nasid, unsigned long *discovered_nasids,
+                  struct xpc_rsvd_page *remote_rp, unsigned long *remote_rp_pa)
 {
-        int bres, i;
+        int l;
+        enum xp_retval ret;
 
         /* get the reserved page's physical address */
 
@@ -472,355 +218,45 @@ xpc_get_remote_rp(int nasid, u64 *discovered_nasids,
                 return xpNoRsvdPageAddr;
 
         /* pull over the reserved page header and part_nasids mask */
-        bres = xp_bte_copy(*remote_rp_pa, (u64)remote_rp,
-                           XPC_RP_HEADER_SIZE + xp_nasid_mask_bytes,
-                           (BTE_NOTIFY | BTE_WACQUIRE), NULL);
-        if (bres != BTE_SUCCESS)
-                return xpc_map_bte_errors(bres);
+        ret = xp_remote_memcpy(xp_pa(remote_rp), *remote_rp_pa,
+                               XPC_RP_HEADER_SIZE + xpc_nasid_mask_nbytes);
+        if (ret != xpSuccess)
+                return ret;
 
         if (discovered_nasids != NULL) {
-                u64 *remote_part_nasids = XPC_RP_PART_NASIDS(remote_rp);
-
-                for (i = 0; i < xp_nasid_mask_words; i++)
-                        discovered_nasids[i] |= remote_part_nasids[i];
-        }
-
-        /* check that the partid is for another partition */
+                unsigned long *remote_part_nasids =
+                    XPC_RP_PART_NASIDS(remote_rp);
 
-        if (remote_rp->partid < 1 ||
-            remote_rp->partid > (XP_MAX_PARTITIONS - 1)) {
-                return xpInvalidPartid;
+                for (l = 0; l < xpc_nasid_mask_nlongs; l++)
+                        discovered_nasids[l] |= remote_part_nasids[l];
         }
 
-        if (remote_rp->partid == sn_partition_id)
-                return xpLocalPartid;
+        /* zero timestamp indicates the reserved page has not been setup */
+        if (remote_rp->ts_jiffies == 0)
+                return xpRsvdPageNotSet;
 
         if (XPC_VERSION_MAJOR(remote_rp->version) !=
             XPC_VERSION_MAJOR(XPC_RP_VERSION)) {
                 return xpBadVersion;
         }
 
-        return xpSuccess;
-}
-
-/*
- * Get a copy of the remote partition's XPC variables from the reserved page.
- *
- * remote_vars points to a buffer that is cacheline aligned for BTE copies and
- * assumed to be of size XPC_RP_VARS_SIZE.
- */
-static enum xp_retval
-xpc_get_remote_vars(u64 remote_vars_pa, struct xpc_vars *remote_vars)
-{
-        int bres;
-
-        if (remote_vars_pa == 0)
-                return xpVarsNotSet;
-
-        /* pull over the cross partition variables */
-        bres = xp_bte_copy(remote_vars_pa, (u64)remote_vars, XPC_RP_VARS_SIZE,
-                           (BTE_NOTIFY | BTE_WACQUIRE), NULL);
-        if (bres != BTE_SUCCESS)
-                return xpc_map_bte_errors(bres);
-
-        if (XPC_VERSION_MAJOR(remote_vars->version) !=
-            XPC_VERSION_MAJOR(XPC_V_VERSION)) {
-                return xpBadVersion;
-        }
-
-        return xpSuccess;
-}
-
-/*
- * Update the remote partition's info.
- */
-static void
-xpc_update_partition_info(struct xpc_partition *part, u8 remote_rp_version,
-                          struct timespec *remote_rp_stamp, u64 remote_rp_pa,
-                          u64 remote_vars_pa, struct xpc_vars *remote_vars)
-{
-        part->remote_rp_version = remote_rp_version;
-        dev_dbg(xpc_part, "  remote_rp_version = 0x%016x\n",
-                part->remote_rp_version);
-
-        part->remote_rp_stamp = *remote_rp_stamp;
-        dev_dbg(xpc_part, "  remote_rp_stamp (tv_sec = 0x%lx tv_nsec = 0x%lx\n",
-                part->remote_rp_stamp.tv_sec, part->remote_rp_stamp.tv_nsec);
-
-        part->remote_rp_pa = remote_rp_pa;
-        dev_dbg(xpc_part, "  remote_rp_pa = 0x%016lx\n", part->remote_rp_pa);
-
-        part->remote_vars_pa = remote_vars_pa;
-        dev_dbg(xpc_part, "  remote_vars_pa = 0x%016lx\n",
-                part->remote_vars_pa);
-
-        part->last_heartbeat = remote_vars->heartbeat;
-        dev_dbg(xpc_part, "  last_heartbeat = 0x%016lx\n",
-                part->last_heartbeat);
-
-        part->remote_vars_part_pa = remote_vars->vars_part_pa;
-        dev_dbg(xpc_part, "  remote_vars_part_pa = 0x%016lx\n",
-                part->remote_vars_part_pa);
-
-        part->remote_act_nasid = remote_vars->act_nasid;
-        dev_dbg(xpc_part, "  remote_act_nasid = 0x%x\n",
-                part->remote_act_nasid);
-
-        part->remote_act_phys_cpuid = remote_vars->act_phys_cpuid;
-        dev_dbg(xpc_part, "  remote_act_phys_cpuid = 0x%x\n",
-                part->remote_act_phys_cpuid);
-
-        part->remote_amos_page_pa = remote_vars->amos_page_pa;
-        dev_dbg(xpc_part, "  remote_amos_page_pa = 0x%lx\n",
-                part->remote_amos_page_pa);
-
-        part->remote_vars_version = remote_vars->version;
-        dev_dbg(xpc_part, "  remote_vars_version = 0x%x\n",
-                part->remote_vars_version);
-}
-
-/*
- * Prior code has determined the nasid which generated an IPI.  Inspect
- * that nasid to determine if its partition needs to be activated or
- * deactivated.
- *
- * A partition is consider "awaiting activation" if our partition
- * flags indicate it is not active and it has a heartbeat.  A
- * partition is considered "awaiting deactivation" if our partition
- * flags indicate it is active but it has no heartbeat or it is not
- * sending its heartbeat to us.
- *
- * To determine the heartbeat, the remote nasid must have a properly
- * initialized reserved page.
- */
-static void
-xpc_identify_act_IRQ_req(int nasid)
-{
-        struct xpc_rsvd_page *remote_rp;
-        struct xpc_vars *remote_vars;
-        u64 remote_rp_pa;
-        u64 remote_vars_pa;
-        int remote_rp_version;
-        int reactivate = 0;
-        int stamp_diff;
-        struct timespec remote_rp_stamp = { 0, 0 };
-        short partid;
-        struct xpc_partition *part;
-        enum xp_retval ret;
-
-        /* pull over the reserved page structure */
-
-        remote_rp = (struct xpc_rsvd_page *)xpc_remote_copy_buffer;
-
-        ret = xpc_get_remote_rp(nasid, NULL, remote_rp, &remote_rp_pa);
-        if (ret != xpSuccess) {
-                dev_warn(xpc_part, "unable to get reserved page from nasid %d, "
-                         "which sent interrupt, reason=%d\n", nasid, ret);
-                return;
-        }
-
-        remote_vars_pa = remote_rp->vars_pa;
-        remote_rp_version = remote_rp->version;
-        if (XPC_SUPPORTS_RP_STAMP(remote_rp_version))
-                remote_rp_stamp = remote_rp->stamp;
-
-        partid = remote_rp->partid;
-        part = &xpc_partitions[partid];
-
-        /* pull over the cross partition variables */
-
-        remote_vars = (struct xpc_vars *)xpc_remote_copy_buffer;
-
-        ret = xpc_get_remote_vars(remote_vars_pa, remote_vars);
-        if (ret != xpSuccess) {
-
-                dev_warn(xpc_part, "unable to get XPC variables from nasid %d, "
-                         "which sent interrupt, reason=%d\n", nasid, ret);
-
-                XPC_DEACTIVATE_PARTITION(part, ret);
-                return;
-        }
-
-        part->act_IRQ_rcvd++;
-
-        dev_dbg(xpc_part, "partid for nasid %d is %d; IRQs = %d; HB = "
-                "%ld:0x%lx\n", (int)nasid, (int)partid, part->act_IRQ_rcvd,
-                remote_vars->heartbeat, remote_vars->heartbeating_to_mask);
-
-        if (xpc_partition_disengaged(part) &&
-            part->act_state == XPC_P_INACTIVE) {
-
-                xpc_update_partition_info(part, remote_rp_version,
-                                          &remote_rp_stamp, remote_rp_pa,
-                                          remote_vars_pa, remote_vars);
-
-                if (XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version)) {
-                        if (xpc_partition_disengage_requested(1UL << partid)) {
-                                /*
-                                 * Other side is waiting on us to disengage,
-                                 * even though we already have.
-                                 */
-                                return;
-                        }
-                } else {
-                        /* other side doesn't support disengage requests */
-                        xpc_clear_partition_disengage_request(1UL << partid);
-                }
-
-                xpc_activate_partition(part);
-                return;
-        }
-
-        DBUG_ON(part->remote_rp_version == 0);
-        DBUG_ON(part->remote_vars_version == 0);
-
-        if (!XPC_SUPPORTS_RP_STAMP(part->remote_rp_version)) {
-                DBUG_ON(XPC_SUPPORTS_DISENGAGE_REQUEST(part->
-                                                       remote_vars_version));
-
-                if (!XPC_SUPPORTS_RP_STAMP(remote_rp_version)) {
-                        DBUG_ON(XPC_SUPPORTS_DISENGAGE_REQUEST(remote_vars->
-                                                               version));
-                        /* see if the other side rebooted */
-                        if (part->remote_amos_page_pa ==
-                            remote_vars->amos_page_pa &&
-                            xpc_hb_allowed(sn_partition_id, remote_vars)) {
-                                /* doesn't look that way, so ignore the IPI */
-                                return;
-                        }
-                }
-
-                /*
-                 * Other side rebooted and previous XPC didn't support the
-                 * disengage request, so we don't need to do anything special.
-                 */
-
-                xpc_update_partition_info(part, remote_rp_version,
-                                          &remote_rp_stamp, remote_rp_pa,
-                                          remote_vars_pa, remote_vars);
-                part->reactivate_nasid = nasid;
-                XPC_DEACTIVATE_PARTITION(part, xpReactivating);
-                return;
-        }
-
-        DBUG_ON(!XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version));
-
-        if (!XPC_SUPPORTS_RP_STAMP(remote_rp_version)) {
-                DBUG_ON(!XPC_SUPPORTS_DISENGAGE_REQUEST(remote_vars->version));
-
-                /*
-                 * Other side rebooted and previous XPC did support the
-                 * disengage request, but the new one doesn't.
-                 */
-
-                xpc_clear_partition_engaged(1UL << partid);
-                xpc_clear_partition_disengage_request(1UL << partid);
-
-                xpc_update_partition_info(part, remote_rp_version,
-                                          &remote_rp_stamp, remote_rp_pa,
-                                          remote_vars_pa, remote_vars);
-                reactivate = 1;
-
-        } else {
-                DBUG_ON(!XPC_SUPPORTS_DISENGAGE_REQUEST(remote_vars->version));
-
-                stamp_diff = xpc_compare_stamps(&part->remote_rp_stamp,
-                                                &remote_rp_stamp);
-                if (stamp_diff != 0) {
-                        DBUG_ON(stamp_diff >= 0);
-
-                        /*
-                         * Other side rebooted and the previous XPC did support
-                         * the disengage request, as does the new one.
-                         */
-
-                        DBUG_ON(xpc_partition_engaged(1UL << partid));
-                        DBUG_ON(xpc_partition_disengage_requested(1UL <<
-                                                                  partid));
-
-                        xpc_update_partition_info(part, remote_rp_version,
-                                                  &remote_rp_stamp,
-                                                  remote_rp_pa, remote_vars_pa,
-                                                  remote_vars);
-                        reactivate = 1;
-                }
-        }
-
-        if (part->disengage_request_timeout > 0 &&
-            !xpc_partition_disengaged(part)) {
-                /* still waiting on other side to disengage from us */
-                return;
-        }
-
-        if (reactivate) {
-                part->reactivate_nasid = nasid;
-                XPC_DEACTIVATE_PARTITION(part, xpReactivating);
-
-        } else if (XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version) &&
-                   xpc_partition_disengage_requested(1UL << partid)) {
-                XPC_DEACTIVATE_PARTITION(part, xpOtherGoingDown);
+        /* check that both remote and local partids are valid for each side */
+        if (remote_rp->SAL_partid < 0 ||
+            remote_rp->SAL_partid >= xp_max_npartitions ||
+            remote_rp->max_npartitions <= xp_partition_id) {
+                return xpInvalidPartid;
         }
-}
 
-/*
- * Loop through the activation AMO variables and process any bits
- * which are set.  Each bit indicates a nasid sending a partition
- * activation or deactivation request.
- *
- * Return #of IRQs detected.
- */
-int
-xpc_identify_act_IRQ_sender(void)
-{
-        int word, bit;
-        u64 nasid_mask;
-        u64 nasid;              /* remote nasid */
-        int n_IRQs_detected = 0;
-        AMO_t *act_amos;
-
-        act_amos = xpc_vars->amos_page + XPC_ACTIVATE_IRQ_AMOS;
-
-        /* scan through act AMO variable looking for non-zero entries */
-        for (word = 0; word < xp_nasid_mask_words; word++) {
-
-                if (xpc_exiting)
-                        break;
-
-                nasid_mask = xpc_IPI_receive(&act_amos[word]);
-                if (nasid_mask == 0) {
-                        /* no IRQs from nasids in this variable */
-                        continue;
-                }
-
-                dev_dbg(xpc_part, "AMO[%d] gave back 0x%lx\n", word,
-                        nasid_mask);
-
-                /*
-                 * If this nasid has been added to the machine since
-                 * our partition was reset, this will retain the
-                 * remote nasid in our reserved pages machine mask.
-                 * This is used in the event of module reload.
-                 */
-                xpc_mach_nasids[word] |= nasid_mask;
-
-                /* locate the nasid(s) which sent interrupts */
+        if (remote_rp->SAL_partid == xp_partition_id)
+                return xpLocalPartid;
 
-                for (bit = 0; bit < (8 * sizeof(u64)); bit++) {
-                        if (nasid_mask & (1UL << bit)) {
-                                n_IRQs_detected++;
-                                nasid = XPC_NASID_FROM_W_B(word, bit);
-                                dev_dbg(xpc_part, "interrupt from nasid %ld\n",
-                                        nasid);
-                                xpc_identify_act_IRQ_req(nasid);
-                        }
-                }
-        }
-        return n_IRQs_detected;
+        return xpSuccess;
 }
 
 /*
- * See if the other side has responded to a partition disengage request
- * from us.
+ * See if the other side has responded to a partition deactivate request
+ * from us. Though we requested the remote partition to deactivate with regard
+ * to us, we really only need to wait for the other side to disengage from us.
  */
 int
 xpc_partition_disengaged(struct xpc_partition *part)
@@ -828,41 +264,37 @@ xpc_partition_disengaged(struct xpc_partition *part)
         short partid = XPC_PARTID(part);
         int disengaged;
 
-        disengaged = (xpc_partition_engaged(1UL << partid) == 0);
-        if (part->disengage_request_timeout) {
+        disengaged = !xpc_partition_engaged(partid);
+        if (part->disengage_timeout) {
                 if (!disengaged) {
-                        if (time_before(jiffies,
-                            part->disengage_request_timeout)) {
+                        if (time_is_after_jiffies(part->disengage_timeout)) {
                                 /* timelimit hasn't been reached yet */
                                 return 0;
                         }
 
                         /*
-                         * Other side hasn't responded to our disengage
+                         * Other side hasn't responded to our deactivate
                          * request in a timely fashion, so assume it's dead.
                          */
 
-                        dev_info(xpc_part, "disengage from remote partition %d "
-                                 "timed out\n", partid);
-                        xpc_disengage_request_timedout = 1;
-                        xpc_clear_partition_engaged(1UL << partid);
+                        dev_info(xpc_part, "deactivate request to remote "
+                                 "partition %d timed out\n", partid);
+                        xpc_disengage_timedout = 1;
+                        xpc_assume_partition_disengaged(partid);
                         disengaged = 1;
                 }
-                part->disengage_request_timeout = 0;
+                part->disengage_timeout = 0;
 
                 /* cancel the timer function, provided it's not us */
-                if (!in_interrupt()) {
-                        del_singleshot_timer_sync(&part->
-                                                  disengage_request_timer);
-                }
+                if (!in_interrupt())
+                        del_singleshot_timer_sync(&part->disengage_timer);
 
-                DBUG_ON(part->act_state != XPC_P_DEACTIVATING &&
-                        part->act_state != XPC_P_INACTIVE);
-                if (part->act_state != XPC_P_INACTIVE)
+                DBUG_ON(part->act_state != XPC_P_AS_DEACTIVATING &&
+                        part->act_state != XPC_P_AS_INACTIVE);
+                if (part->act_state != XPC_P_AS_INACTIVE)
                         xpc_wakeup_channel_mgr(part);
 
-                if (XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version))
-                        xpc_cancel_partition_disengage_request(part);
+                xpc_cancel_partition_deactivation_request(part);
         }
         return disengaged;
 }
@@ -879,8 +311,8 @@ xpc_mark_partition_active(struct xpc_partition *part)
         dev_dbg(xpc_part, "setting partition %d to ACTIVE\n", XPC_PARTID(part));
 
         spin_lock_irqsave(&part->act_lock, irq_flags);
-        if (part->act_state == XPC_P_ACTIVATING) {
-                part->act_state = XPC_P_ACTIVE;
+        if (part->act_state == XPC_P_AS_ACTIVATING) {
+                part->act_state = XPC_P_AS_ACTIVE;
                 ret = xpSuccess;
         } else {
                 DBUG_ON(part->reason == xpSuccess);
@@ -892,7 +324,7 @@ xpc_mark_partition_active(struct xpc_partition *part)
 }
 
 /*
- * Notify XPC that the partition is down.
+ * Start the process of deactivating the specified partition.
  */
 void
 xpc_deactivate_partition(const int line, struct xpc_partition *part,
@@ -902,16 +334,16 @@ xpc_deactivate_partition(const int line, struct xpc_partition *part,
 
         spin_lock_irqsave(&part->act_lock, irq_flags);
 
-        if (part->act_state == XPC_P_INACTIVE) {
+        if (part->act_state == XPC_P_AS_INACTIVE) {
                 XPC_SET_REASON(part, reason, line);
                 spin_unlock_irqrestore(&part->act_lock, irq_flags);
                 if (reason == xpReactivating) {
                         /* we interrupt ourselves to reactivate partition */
-                        xpc_IPI_send_reactivate(part);
+                        xpc_request_partition_reactivation(part);
                 }
                 return;
         }
-        if (part->act_state == XPC_P_DEACTIVATING) {
+        if (part->act_state == XPC_P_AS_DEACTIVATING) {
                 if ((part->reason == xpUnloading && reason != xpUnloading) ||
                     reason == xpReactivating) {
                         XPC_SET_REASON(part, reason, line);
@@ -920,22 +352,18 @@ xpc_deactivate_partition(const int line, struct xpc_partition *part,
                 return;
         }
 
-        part->act_state = XPC_P_DEACTIVATING;
+        part->act_state = XPC_P_AS_DEACTIVATING;
         XPC_SET_REASON(part, reason, line);
 
         spin_unlock_irqrestore(&part->act_lock, irq_flags);
 
-        if (XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version)) {
-                xpc_request_partition_disengage(part);
-                xpc_IPI_send_disengage(part);
+        /* ask remote partition to deactivate with regard to us */
+        xpc_request_partition_deactivation(part);
 
-                /* set a timelimit on the disengage request */
-                part->disengage_request_timeout = jiffies +
-                    (xpc_disengage_request_timelimit * HZ);
-                part->disengage_request_timer.expires =
-                    part->disengage_request_timeout;
-                add_timer(&part->disengage_request_timer);
-        }
+        /* set a timelimit on the disengage phase of the deactivation request */
+        part->disengage_timeout = jiffies + (xpc_disengage_timelimit * HZ);
+        part->disengage_timer.expires = part->disengage_timeout;
+        add_timer(&part->disengage_timer);
 
         dev_dbg(xpc_part, "bringing partition %d down, reason = %d\n",
                 XPC_PARTID(part), reason);
@@ -955,7 +383,7 @@ xpc_mark_partition_inactive(struct xpc_partition *part)
                 XPC_PARTID(part));
 
         spin_lock_irqsave(&part->act_lock, irq_flags);
-        part->act_state = XPC_P_INACTIVE;
+        part->act_state = XPC_P_AS_INACTIVE;
         spin_unlock_irqrestore(&part->act_lock, irq_flags);
         part->remote_rp_pa = 0;
 }
@@ -974,28 +402,22 @@ xpc_discovery(void)
 {
         void *remote_rp_base;
         struct xpc_rsvd_page *remote_rp;
-        struct xpc_vars *remote_vars;
-        u64 remote_rp_pa;
-        u64 remote_vars_pa;
+        unsigned long remote_rp_pa;
         int region;
         int region_size;
         int max_regions;
         int nasid;
         struct xpc_rsvd_page *rp;
-        short partid;
-        struct xpc_partition *part;
-        u64 *discovered_nasids;
+        unsigned long *discovered_nasids;
         enum xp_retval ret;
 
         remote_rp = xpc_kmalloc_cacheline_aligned(XPC_RP_HEADER_SIZE +
-                                                  xp_nasid_mask_bytes,
+                                                  xpc_nasid_mask_nbytes,
                                                   GFP_KERNEL, &remote_rp_base);
         if (remote_rp == NULL)
                 return;
 
-        remote_vars = (struct xpc_vars *)remote_rp;
-
-        discovered_nasids = kzalloc(sizeof(u64) * xp_nasid_mask_words,
+        discovered_nasids = kzalloc(sizeof(long) * xpc_nasid_mask_nlongs,
                                     GFP_KERNEL);
         if (discovered_nasids == NULL) {
                 kfree(remote_rp_base);
@@ -1010,7 +432,7 @@ xpc_discovery(void)
          * protection is in regards to memory, IOI and IPI.
          */
         max_regions = 64;
-        region_size = sn_region_size;
+        region_size = xp_region_size;
 
         switch (region_size) {
         case 128:
@@ -1038,28 +460,28 @@ xpc_discovery(void)
 
                         dev_dbg(xpc_part, "checking nasid %d\n", nasid);
 
-                        if (XPC_NASID_IN_ARRAY(nasid, xpc_part_nasids)) {
+                        if (test_bit(nasid / 2, xpc_part_nasids)) {
                                 dev_dbg(xpc_part, "PROM indicates Nasid %d is "
                                         "part of the local partition; skipping "
                                         "region\n", nasid);
                                 break;
                         }
 
-                        if (!(XPC_NASID_IN_ARRAY(nasid, xpc_mach_nasids))) {
+                        if (!(test_bit(nasid / 2, xpc_mach_nasids))) {
                                 dev_dbg(xpc_part, "PROM indicates Nasid %d was "
                                         "not on Numa-Link network at reset\n",
                                         nasid);
                                 continue;
                         }
 
-                        if (XPC_NASID_IN_ARRAY(nasid, discovered_nasids)) {
+                        if (test_bit(nasid / 2, discovered_nasids)) {
                                 dev_dbg(xpc_part, "Nasid %d is part of a "
                                         "partition which was previously "
                                         "discovered\n", nasid);
                                 continue;
                         }
 
-                        /* pull over the reserved page structure */
+                        /* pull over the rsvd page header & part_nasids mask */
 
                         ret = xpc_get_remote_rp(nasid, discovered_nasids,
                                                 remote_rp, &remote_rp_pa);
@@ -1074,72 +496,8 @@ xpc_discovery(void)
                                 continue;
                         }
 
-                        remote_vars_pa = remote_rp->vars_pa;
-
-                        partid = remote_rp->partid;
-                        part = &xpc_partitions[partid];
-
-                        /* pull over the cross partition variables */
-
-                        ret = xpc_get_remote_vars(remote_vars_pa, remote_vars);
-                        if (ret != xpSuccess) {
-                                dev_dbg(xpc_part, "unable to get XPC variables "
-                                        "from nasid %d, reason=%d\n", nasid,
-                                        ret);
-
-                                XPC_DEACTIVATE_PARTITION(part, ret);
-                                continue;
-                        }
-
-                        if (part->act_state != XPC_P_INACTIVE) {
-                                dev_dbg(xpc_part, "partition %d on nasid %d is "
-                                        "already activating\n", partid, nasid);
-                                break;
-                        }
-
-                        /*
-                         * Register the remote partition's AMOs with SAL so it
-                         * can handle and cleanup errors within that address
-                         * range should the remote partition go down. We don't
-                         * unregister this range because it is difficult to
-                         * tell when outstanding writes to the remote partition
-                         * are finished and thus when it is thus safe to
-                         * unregister. This should not result in wasted space
-                         * in the SAL xp_addr_region table because we should
-                         * get the same page for remote_act_amos_pa after
-                         * module reloads and system reboots.
-                         */
-                        if (sn_register_xp_addr_region
-                            (remote_vars->amos_page_pa, PAGE_SIZE, 1) < 0) {
-                                dev_dbg(xpc_part,
-                                        "partition %d failed to "
-                                        "register xp_addr region 0x%016lx\n",
-                                        partid, remote_vars->amos_page_pa);
-
-                                XPC_SET_REASON(part, xpPhysAddrRegFailed,
-                                               __LINE__);
-                                break;
-                        }
-
-                        /*
-                         * The remote nasid is valid and available.
-                         * Send an interrupt to that nasid to notify
-                         * it that we are ready to begin activation.
-                         */
-                        dev_dbg(xpc_part, "sending an interrupt to AMO 0x%lx, "
-                                "nasid %d, phys_cpuid 0x%x\n",
-                                remote_vars->amos_page_pa,
-                                remote_vars->act_nasid,
-                                remote_vars->act_phys_cpuid);
-
-                        if (XPC_SUPPORTS_DISENGAGE_REQUEST(remote_vars->
-                                                           version)) {
-                                part->remote_amos_page_pa =
-                                    remote_vars->amos_page_pa;
-                                xpc_mark_partition_disengaged(part);
-                                xpc_cancel_partition_disengage_request(part);
-                        }
-                        xpc_IPI_send_activate(remote_vars);
+                        xpc_request_partition_activation(remote_rp,
+                                                         remote_rp_pa, nasid);
                 }
         }
 
@@ -1155,20 +513,16 @@ enum xp_retval
 xpc_initiate_partid_to_nasids(short partid, void *nasid_mask)
 {
         struct xpc_partition *part;
-        u64 part_nasid_pa;
-        int bte_res;
+        unsigned long part_nasid_pa;
 
         part = &xpc_partitions[partid];
         if (part->remote_rp_pa == 0)
                 return xpPartitionDown;
 
-        memset(nasid_mask, 0, XP_NASID_MASK_BYTES);
-
-        part_nasid_pa = (u64)XPC_RP_PART_NASIDS(part->remote_rp_pa);
+        memset(nasid_mask, 0, xpc_nasid_mask_nbytes);
 
-        bte_res = xp_bte_copy(part_nasid_pa, (u64)nasid_mask,
-                              xp_nasid_mask_bytes, (BTE_NOTIFY | BTE_WACQUIRE),
-                              NULL);
+        part_nasid_pa = (unsigned long)XPC_RP_PART_NASIDS(part->remote_rp_pa);
 
-        return xpc_map_bte_errors(bte_res);
+        return xp_remote_memcpy(xp_pa(nasid_mask), part_nasid_pa,
+                                xpc_nasid_mask_nbytes);
 }
diff --git a/drivers/misc/sgi-xp/xpc_sn2.c b/drivers/misc/sgi-xp/xpc_sn2.c
new file mode 100644
index 000000000000..b4882ccf6344
--- /dev/null
+++ b/drivers/misc/sgi-xp/xpc_sn2.c
@@ -0,0 +1,2404 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ */
+
+/*
+ * Cross Partition Communication (XPC) sn2-based functions.
+ *
+ *     Architecture specific implementation of common functions.
+ *
+ */
+
+#include <linux/delay.h>
+#include <asm/uncached.h>
+#include <asm/sn/mspec.h>
+#include <asm/sn/sn_sal.h>
+#include "xpc.h"
+
+/*
+ * Define the number of u64s required to represent all the C-brick nasids
+ * as a bitmap.  The cross-partition kernel modules deal only with
+ * C-brick nasids, thus the need for bitmaps which don't account for
+ * odd-numbered (non C-brick) nasids.
+ */
+#define XPC_MAX_PHYSNODES_SN2   (MAX_NUMALINK_NODES / 2)
+#define XP_NASID_MASK_BYTES_SN2 ((XPC_MAX_PHYSNODES_SN2 + 7) / 8)
+#define XP_NASID_MASK_WORDS_SN2 ((XPC_MAX_PHYSNODES_SN2 + 63) / 64)
+
+/*
+ * Memory for XPC's amo variables is allocated by the MSPEC driver. These
+ * pages are located in the lowest granule. The lowest granule uses 4k pages
+ * for cached references and an alternate TLB handler to never provide a
+ * cacheable mapping for the entire region. This will prevent speculative
+ * reading of cached copies of our lines from being issued which will cause
+ * a PI FSB Protocol error to be generated by the SHUB. For XPC, we need 64
+ * amo variables (based on XP_MAX_NPARTITIONS_SN2) to identify the senders of
+ * NOTIFY IRQs, 128 amo variables (based on XP_NASID_MASK_WORDS_SN2) to identify
+ * the senders of ACTIVATE IRQs, 1 amo variable to identify which remote
+ * partitions (i.e., XPCs) consider themselves currently engaged with the
+ * local XPC and 1 amo variable to request partition deactivation.
+ */
+#define XPC_NOTIFY_IRQ_AMOS_SN2         0
+#define XPC_ACTIVATE_IRQ_AMOS_SN2       (XPC_NOTIFY_IRQ_AMOS_SN2 + \
+                                         XP_MAX_NPARTITIONS_SN2)
+#define XPC_ENGAGED_PARTITIONS_AMO_SN2  (XPC_ACTIVATE_IRQ_AMOS_SN2 + \
+                                         XP_NASID_MASK_WORDS_SN2)
+#define XPC_DEACTIVATE_REQUEST_AMO_SN2  (XPC_ENGAGED_PARTITIONS_AMO_SN2 + 1)
+
+/*
+ * Buffer used to store a local copy of portions of a remote partition's
+ * reserved page (either its header and part_nasids mask, or its vars).
+ */
+static void *xpc_remote_copy_buffer_base_sn2;
+static char *xpc_remote_copy_buffer_sn2;
+
+static struct xpc_vars_sn2 *xpc_vars_sn2;
+static struct xpc_vars_part_sn2 *xpc_vars_part_sn2;
+
+static int
+xpc_setup_partitions_sn_sn2(void)
+{
+        /* nothing needs to be done */
+        return 0;
+}
+
+/* SH_IPI_ACCESS shub register value on startup */
+static u64 xpc_sh1_IPI_access_sn2;
+static u64 xpc_sh2_IPI_access0_sn2;
+static u64 xpc_sh2_IPI_access1_sn2;
+static u64 xpc_sh2_IPI_access2_sn2;
+static u64 xpc_sh2_IPI_access3_sn2;
+
+/*
+ * Change protections to allow IPI operations.
+ */
+static void
+xpc_allow_IPI_ops_sn2(void)
+{
+        int node;
+        int nasid;
+
+        /* !!! The following should get moved into SAL. */
+        if (is_shub2()) {
+                xpc_sh2_IPI_access0_sn2 =
+                    (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS0));
+                xpc_sh2_IPI_access1_sn2 =
+                    (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS1));
+                xpc_sh2_IPI_access2_sn2 =
+                    (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS2));
+                xpc_sh2_IPI_access3_sn2 =
+                    (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS3));
+
+                for_each_online_node(node) {
+                        nasid = cnodeid_to_nasid(node);
+                        HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS0),
+                              -1UL);
+                        HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS1),
+                              -1UL);
+                        HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS2),
+                              -1UL);
+                        HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS3),
+                              -1UL);
+                }
+        } else {
+                xpc_sh1_IPI_access_sn2 =
+                    (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH1_IPI_ACCESS));
+
+                for_each_online_node(node) {
+                        nasid = cnodeid_to_nasid(node);
+                        HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH1_IPI_ACCESS),
+                              -1UL);
+                }
+        }
+}
+
+/*
+ * Restrict protections to disallow IPI operations.
+ */
+static void
+xpc_disallow_IPI_ops_sn2(void)
+{
+        int node;
+        int nasid;
+
+        /* !!! The following should get moved into SAL. */
+        if (is_shub2()) {
+                for_each_online_node(node) {
+                        nasid = cnodeid_to_nasid(node);
+                        HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS0),
+                              xpc_sh2_IPI_access0_sn2);
+                        HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS1),
+                              xpc_sh2_IPI_access1_sn2);
+                        HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS2),
+                              xpc_sh2_IPI_access2_sn2);
+                        HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS3),
+                              xpc_sh2_IPI_access3_sn2);
+                }
+        } else {
+                for_each_online_node(node) {
+                        nasid = cnodeid_to_nasid(node);
+                        HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH1_IPI_ACCESS),
+                              xpc_sh1_IPI_access_sn2);
+                }
+        }
+}
+
+/*
+ * The following set of functions are used for the sending and receiving of
+ * IRQs (also known as IPIs). There are two flavors of IRQs, one that is
+ * associated with partition activity (SGI_XPC_ACTIVATE) and the other that
+ * is associated with channel activity (SGI_XPC_NOTIFY).
+ */
+
+static u64
+xpc_receive_IRQ_amo_sn2(struct amo *amo)
+{
+        return FETCHOP_LOAD_OP(TO_AMO((u64)&amo->variable), FETCHOP_CLEAR);
+}
+
+static enum xp_retval
+xpc_send_IRQ_sn2(struct amo *amo, u64 flag, int nasid, int phys_cpuid,
+                 int vector)
+{
+        int ret = 0;
+        unsigned long irq_flags;
+
+        local_irq_save(irq_flags);
+
+        FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_OR, flag);
+        sn_send_IPI_phys(nasid, phys_cpuid, vector, 0);
+
+        /*
+         * We must always use the nofault function regardless of whether we
+         * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
+         * didn't, we'd never know that the other partition is down and would
+         * keep sending IRQs and amos to it until the heartbeat times out.
+         */
+        ret = xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo->variable),
+                                                     xp_nofault_PIOR_target));
+
+        local_irq_restore(irq_flags);
+
+        return (ret == 0) ? xpSuccess : xpPioReadError;
+}
+
+static struct amo *
+xpc_init_IRQ_amo_sn2(int index)
+{
+        struct amo *amo = xpc_vars_sn2->amos_page + index;
+
+        (void)xpc_receive_IRQ_amo_sn2(amo);     /* clear amo variable */
+        return amo;
+}
+
+/*
+ * Functions associated with SGI_XPC_ACTIVATE IRQ.
+ */
+
+/*
+ * Notify the heartbeat check thread that an activate IRQ has been received.
+ */
+static irqreturn_t
+xpc_handle_activate_IRQ_sn2(int irq, void *dev_id)
+{
+        unsigned long irq_flags;
+
+        spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+        xpc_activate_IRQ_rcvd++;
+        spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+
+        wake_up_interruptible(&xpc_activate_IRQ_wq);
+        return IRQ_HANDLED;
+}
+
+/*
+ * Flag the appropriate amo variable and send an IRQ to the specified node.
+ */
+static void
+xpc_send_activate_IRQ_sn2(unsigned long amos_page_pa, int from_nasid,
+                          int to_nasid, int to_phys_cpuid)
+{
+        struct amo *amos = (struct amo *)__va(amos_page_pa +
+                                              (XPC_ACTIVATE_IRQ_AMOS_SN2 *
+                                              sizeof(struct amo)));
+
+        (void)xpc_send_IRQ_sn2(&amos[BIT_WORD(from_nasid / 2)],
+                               BIT_MASK(from_nasid / 2), to_nasid,
+                               to_phys_cpuid, SGI_XPC_ACTIVATE);
+}
+
+static void
+xpc_send_local_activate_IRQ_sn2(int from_nasid)
+{
+        unsigned long irq_flags;
+        struct amo *amos = (struct amo *)__va(xpc_vars_sn2->amos_page_pa +
+                                              (XPC_ACTIVATE_IRQ_AMOS_SN2 *
+                                              sizeof(struct amo)));
+
+        /* fake the sending and receipt of an activate IRQ from remote nasid */
+        FETCHOP_STORE_OP(TO_AMO((u64)&amos[BIT_WORD(from_nasid / 2)].variable),
+                         FETCHOP_OR, BIT_MASK(from_nasid / 2));
+
+        spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+        xpc_activate_IRQ_rcvd++;
+        spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+
+        wake_up_interruptible(&xpc_activate_IRQ_wq);
+}
+
+/*
+ * Functions associated with SGI_XPC_NOTIFY IRQ.
+ */
+
+/*
+ * Check to see if any chctl flags were sent from the specified partition.
+ */
+static void
+xpc_check_for_sent_chctl_flags_sn2(struct xpc_partition *part)
+{
+        union xpc_channel_ctl_flags chctl;
+        unsigned long irq_flags;
+
+        chctl.all_flags = xpc_receive_IRQ_amo_sn2(part->sn.sn2.
+                                                  local_chctl_amo_va);
+        if (chctl.all_flags == 0)
+                return;
+
+        spin_lock_irqsave(&part->chctl_lock, irq_flags);
+        part->chctl.all_flags |= chctl.all_flags;
+        spin_unlock_irqrestore(&part->chctl_lock, irq_flags);
+
+        dev_dbg(xpc_chan, "received notify IRQ from partid=%d, chctl.all_flags="
+                "0x%lx\n", XPC_PARTID(part), chctl.all_flags);
+
+        xpc_wakeup_channel_mgr(part);
+}
+
+/*
+ * Handle the receipt of a SGI_XPC_NOTIFY IRQ by seeing whether the specified
+ * partition actually sent it. Since SGI_XPC_NOTIFY IRQs may be shared by more
+ * than one partition, we use an amo structure per partition to indicate
+ * whether a partition has sent an IRQ or not.  If it has, then wake up the
+ * associated kthread to handle it.
+ *
+ * All SGI_XPC_NOTIFY IRQs received by XPC are the result of IRQs sent by XPC
+ * running on other partitions.
+ *
+ * Noteworthy Arguments:
+ *
+ *      irq - Interrupt ReQuest number. NOT USED.
+ *
+ *      dev_id - partid of IRQ's potential sender.
+ */
+static irqreturn_t
+xpc_handle_notify_IRQ_sn2(int irq, void *dev_id)
+{
+        short partid = (short)(u64)dev_id;
+        struct xpc_partition *part = &xpc_partitions[partid];
+
+        DBUG_ON(partid < 0 || partid >= XP_MAX_NPARTITIONS_SN2);
+
+        if (xpc_part_ref(part)) {
+                xpc_check_for_sent_chctl_flags_sn2(part);
+
+                xpc_part_deref(part);
+        }
+        return IRQ_HANDLED;
+}
+
+/*
+ * Check to see if xpc_handle_notify_IRQ_sn2() dropped any IRQs on the floor
+ * because the write to their associated amo variable completed after the IRQ
+ * was received.
+ */
+static void
+xpc_check_for_dropped_notify_IRQ_sn2(struct xpc_partition *part)
+{
+        struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2;
+
+        if (xpc_part_ref(part)) {
+                xpc_check_for_sent_chctl_flags_sn2(part);
+
+                part_sn2->dropped_notify_IRQ_timer.expires = jiffies +
+                    XPC_DROPPED_NOTIFY_IRQ_WAIT_INTERVAL;
+                add_timer(&part_sn2->dropped_notify_IRQ_timer);
+                xpc_part_deref(part);
+        }
+}
+
+/*
+ * Send a notify IRQ to the remote partition that is associated with the
+ * specified channel.
+ */
+static void
+xpc_send_notify_IRQ_sn2(struct xpc_channel *ch, u8 chctl_flag,
+                        char *chctl_flag_string, unsigned long *irq_flags)
+{
+        struct xpc_partition *part = &xpc_partitions[ch->partid];
+        struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2;
+        union xpc_channel_ctl_flags chctl = { 0 };
+        enum xp_retval ret;
+
+        if (likely(part->act_state != XPC_P_AS_DEACTIVATING)) {
+                chctl.flags[ch->number] = chctl_flag;
+                ret = xpc_send_IRQ_sn2(part_sn2->remote_chctl_amo_va,
+                                       chctl.all_flags,
+                                       part_sn2->notify_IRQ_nasid,
+                                       part_sn2->notify_IRQ_phys_cpuid,
+                                       SGI_XPC_NOTIFY);
+                dev_dbg(xpc_chan, "%s sent to partid=%d, channel=%d, ret=%d\n",
+                        chctl_flag_string, ch->partid, ch->number, ret);
+                if (unlikely(ret != xpSuccess)) {
+                        if (irq_flags != NULL)
+                                spin_unlock_irqrestore(&ch->lock, *irq_flags);
+                        XPC_DEACTIVATE_PARTITION(part, ret);
+                        if (irq_flags != NULL)
+                                spin_lock_irqsave(&ch->lock, *irq_flags);
+                }
+        }
+}
+
+#define XPC_SEND_NOTIFY_IRQ_SN2(_ch, _ipi_f, _irq_f) \
+                xpc_send_notify_IRQ_sn2(_ch, _ipi_f, #_ipi_f, _irq_f)
+
+/*
+ * Make it look like the remote partition, which is associated with the
+ * specified channel, sent us a notify IRQ. This faked IRQ will be handled
+ * by xpc_check_for_dropped_notify_IRQ_sn2().
+ */
+static void
+xpc_send_local_notify_IRQ_sn2(struct xpc_channel *ch, u8 chctl_flag,
+                              char *chctl_flag_string)
+{
+        struct xpc_partition *part = &xpc_partitions[ch->partid];
+        union xpc_channel_ctl_flags chctl = { 0 };
+
+        chctl.flags[ch->number] = chctl_flag;
+        FETCHOP_STORE_OP(TO_AMO((u64)&part->sn.sn2.local_chctl_amo_va->
+                                variable), FETCHOP_OR, chctl.all_flags);
+        dev_dbg(xpc_chan, "%s sent local from partid=%d, channel=%d\n",
+                chctl_flag_string, ch->partid, ch->number);
+}
+
+#define XPC_SEND_LOCAL_NOTIFY_IRQ_SN2(_ch, _ipi_f) \
+                xpc_send_local_notify_IRQ_sn2(_ch, _ipi_f, #_ipi_f)
+
+static void
+xpc_send_chctl_closerequest_sn2(struct xpc_channel *ch,
+                                unsigned long *irq_flags)
+{
+        struct xpc_openclose_args *args = ch->sn.sn2.local_openclose_args;
+
+        args->reason = ch->reason;
+        XPC_SEND_NOTIFY_IRQ_SN2(ch, XPC_CHCTL_CLOSEREQUEST, irq_flags);
+}
+
+static void
+xpc_send_chctl_closereply_sn2(struct xpc_channel *ch, unsigned long *irq_flags)
+{
+        XPC_SEND_NOTIFY_IRQ_SN2(ch, XPC_CHCTL_CLOSEREPLY, irq_flags);
+}
+
+static void
+xpc_send_chctl_openrequest_sn2(struct xpc_channel *ch, unsigned long *irq_flags)
+{
+        struct xpc_openclose_args *args = ch->sn.sn2.local_openclose_args;
+
+        args->entry_size = ch->entry_size;
+        args->local_nentries = ch->local_nentries;
+        XPC_SEND_NOTIFY_IRQ_SN2(ch, XPC_CHCTL_OPENREQUEST, irq_flags);
+}
+
+static void
+xpc_send_chctl_openreply_sn2(struct xpc_channel *ch, unsigned long *irq_flags)
+{
+        struct xpc_openclose_args *args = ch->sn.sn2.local_openclose_args;
+
+        args->remote_nentries = ch->remote_nentries;
+        args->local_nentries = ch->local_nentries;
+        args->local_msgqueue_pa = xp_pa(ch->sn.sn2.local_msgqueue);
+        XPC_SEND_NOTIFY_IRQ_SN2(ch, XPC_CHCTL_OPENREPLY, irq_flags);
+}
+
+static void
+xpc_send_chctl_msgrequest_sn2(struct xpc_channel *ch)
+{
+        XPC_SEND_NOTIFY_IRQ_SN2(ch, XPC_CHCTL_MSGREQUEST, NULL);
+}
+
+static void
+xpc_send_chctl_local_msgrequest_sn2(struct xpc_channel *ch)
+{
+        XPC_SEND_LOCAL_NOTIFY_IRQ_SN2(ch, XPC_CHCTL_MSGREQUEST);
+}
+
+static void
+xpc_save_remote_msgqueue_pa_sn2(struct xpc_channel *ch,
+                                unsigned long msgqueue_pa)
+{
+        ch->sn.sn2.remote_msgqueue_pa = msgqueue_pa;
+}
+
+/*
+ * This next set of functions are used to keep track of when a partition is
+ * potentially engaged in accessing memory belonging to another partition.
+ */
+
+static void
+xpc_indicate_partition_engaged_sn2(struct xpc_partition *part)
+{
+        unsigned long irq_flags;
+        struct amo *amo = (struct amo *)__va(part->sn.sn2.remote_amos_page_pa +
+                                             (XPC_ENGAGED_PARTITIONS_AMO_SN2 *
+                                             sizeof(struct amo)));
+
+        local_irq_save(irq_flags);
+
+        /* set bit corresponding to our partid in remote partition's amo */
+        FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_OR,
+                         BIT(sn_partition_id));
+
+        /*
+         * We must always use the nofault function regardless of whether we
+         * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
+         * didn't, we'd never know that the other partition is down and would
+         * keep sending IRQs and amos to it until the heartbeat times out.
+         */
+        (void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo->
+                                                               variable),
+                                                     xp_nofault_PIOR_target));
+
+        local_irq_restore(irq_flags);
+}
+
+static void
+xpc_indicate_partition_disengaged_sn2(struct xpc_partition *part)
+{
+        struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2;
+        unsigned long irq_flags;
+        struct amo *amo = (struct amo *)__va(part_sn2->remote_amos_page_pa +
+                                             (XPC_ENGAGED_PARTITIONS_AMO_SN2 *
+                                             sizeof(struct amo)));
+
+        local_irq_save(irq_flags);
+
+        /* clear bit corresponding to our partid in remote partition's amo */
+        FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_AND,
+                         ~BIT(sn_partition_id));
+
+        /*
+         * We must always use the nofault function regardless of whether we
+         * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
+         * didn't, we'd never know that the other partition is down and would
+         * keep sending IRQs and amos to it until the heartbeat times out.
+         */
+        (void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo->
+                                                               variable),
+                                                     xp_nofault_PIOR_target));
+
+        local_irq_restore(irq_flags);
+
+        /*
+         * Send activate IRQ to get other side to see that we've cleared our
+         * bit in their engaged partitions amo.
+         */
+        xpc_send_activate_IRQ_sn2(part_sn2->remote_amos_page_pa,
+                                  cnodeid_to_nasid(0),
+                                  part_sn2->activate_IRQ_nasid,
+                                  part_sn2->activate_IRQ_phys_cpuid);
+}
+
+static void
+xpc_assume_partition_disengaged_sn2(short partid)
+{
+        struct amo *amo = xpc_vars_sn2->amos_page +
+                          XPC_ENGAGED_PARTITIONS_AMO_SN2;
+
+        /* clear bit(s) based on partid mask in our partition's amo */
+        FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_AND,
+                         ~BIT(partid));
+}
+
+static int
+xpc_partition_engaged_sn2(short partid)
+{
+        struct amo *amo = xpc_vars_sn2->amos_page +
+                          XPC_ENGAGED_PARTITIONS_AMO_SN2;
+
+        /* our partition's amo variable ANDed with partid mask */
+        return (FETCHOP_LOAD_OP(TO_AMO((u64)&amo->variable), FETCHOP_LOAD) &
+                BIT(partid)) != 0;
+}
+
+static int
+xpc_any_partition_engaged_sn2(void)
+{
+        struct amo *amo = xpc_vars_sn2->amos_page +
+                          XPC_ENGAGED_PARTITIONS_AMO_SN2;
+
+        /* our partition's amo variable */
+        return FETCHOP_LOAD_OP(TO_AMO((u64)&amo->variable), FETCHOP_LOAD) != 0;
+}
+
+/* original protection values for each node */
+static u64 xpc_prot_vec_sn2[MAX_NUMNODES];
+
+/*
+ * Change protections to allow amo operations on non-Shub 1.1 systems.
+ */
+static enum xp_retval
+xpc_allow_amo_ops_sn2(struct amo *amos_page)
+{
+        u64 nasid_array = 0;
+        int ret;
+
+        /*
+         * On SHUB 1.1, we cannot call sn_change_memprotect() since the BIST
+         * collides with memory operations. On those systems we call
+         * xpc_allow_amo_ops_shub_wars_1_1_sn2() instead.
+         */
+        if (!enable_shub_wars_1_1()) {
+                ret = sn_change_memprotect(ia64_tpa((u64)amos_page), PAGE_SIZE,
+                                           SN_MEMPROT_ACCESS_CLASS_1,
+                                           &nasid_array);
+                if (ret != 0)
+                        return xpSalError;
+        }
+        return xpSuccess;
+}
+
+/*
+ * Change protections to allow amo operations on Shub 1.1 systems.
+ */
+static void
+xpc_allow_amo_ops_shub_wars_1_1_sn2(void)
+{
+        int node;
+        int nasid;
+
+        if (!enable_shub_wars_1_1())
+                return;
+
+        for_each_online_node(node) {
+                nasid = cnodeid_to_nasid(node);
+                /* save current protection values */
+                xpc_prot_vec_sn2[node] =
+                    (u64)HUB_L((u64 *)GLOBAL_MMR_ADDR(nasid,
+                                                  SH1_MD_DQLP_MMR_DIR_PRIVEC0));
+                /* open up everything */
+                HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid,
+                                             SH1_MD_DQLP_MMR_DIR_PRIVEC0),
+                      -1UL);
+                HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid,
+                                             SH1_MD_DQRP_MMR_DIR_PRIVEC0),
+                      -1UL);
+        }
+}
+
+static enum xp_retval
+xpc_get_partition_rsvd_page_pa_sn2(void *buf, u64 *cookie, unsigned long *rp_pa,
+                                   size_t *len)
+{
+        s64 status;
+        enum xp_retval ret;
+
+        status = sn_partition_reserved_page_pa((u64)buf, cookie, rp_pa, len);
+        if (status == SALRET_OK)
+                ret = xpSuccess;
+        else if (status == SALRET_MORE_PASSES)
+                ret = xpNeedMoreInfo;
+        else
+                ret = xpSalError;
+
+        return ret;
+}
+
+
+static int
+xpc_setup_rsvd_page_sn_sn2(struct xpc_rsvd_page *rp)
+{
+        struct amo *amos_page;
+        int i;
+        int ret;
+
+        xpc_vars_sn2 = XPC_RP_VARS(rp);
+
+        rp->sn.vars_pa = xp_pa(xpc_vars_sn2);
+
+        /* vars_part array follows immediately after vars */
+        xpc_vars_part_sn2 = (struct xpc_vars_part_sn2 *)((u8 *)XPC_RP_VARS(rp) +
+                                                         XPC_RP_VARS_SIZE);
+
+        /*
+         * Before clearing xpc_vars_sn2, see if a page of amos had been
+         * previously allocated. If not we'll need to allocate one and set
+         * permissions so that cross-partition amos are allowed.
+         *
+         * The allocated amo page needs MCA reporting to remain disabled after
+         * XPC has unloaded.  To make this work, we keep a copy of the pointer
+         * to this page (i.e., amos_page) in the struct xpc_vars_sn2 structure,
+         * which is pointed to by the reserved page, and re-use that saved copy
+         * on subsequent loads of XPC. This amo page is never freed, and its
+         * memory protections are never restricted.
+         */
+        amos_page = xpc_vars_sn2->amos_page;
+        if (amos_page == NULL) {
+                amos_page = (struct amo *)TO_AMO(uncached_alloc_page(0, 1));
+                if (amos_page == NULL) {
+                        dev_err(xpc_part, "can't allocate page of amos\n");
+                        return -ENOMEM;
+                }
+
+                /*
+                 * Open up amo-R/W to cpu.  This is done on Shub 1.1 systems
+                 * when xpc_allow_amo_ops_shub_wars_1_1_sn2() is called.
+                 */
+                ret = xpc_allow_amo_ops_sn2(amos_page);
+                if (ret != xpSuccess) {
+                        dev_err(xpc_part, "can't allow amo operations\n");
+                        uncached_free_page(__IA64_UNCACHED_OFFSET |
+                                           TO_PHYS((u64)amos_page), 1);
+                        return -EPERM;
+                }
+        }
+
+        /* clear xpc_vars_sn2 */
+        memset(xpc_vars_sn2, 0, sizeof(struct xpc_vars_sn2));
+
+        xpc_vars_sn2->version = XPC_V_VERSION;
+        xpc_vars_sn2->activate_IRQ_nasid = cpuid_to_nasid(0);
+        xpc_vars_sn2->activate_IRQ_phys_cpuid = cpu_physical_id(0);
+        xpc_vars_sn2->vars_part_pa = xp_pa(xpc_vars_part_sn2);
+        xpc_vars_sn2->amos_page_pa = ia64_tpa((u64)amos_page);
+        xpc_vars_sn2->amos_page = amos_page;    /* save for next load of XPC */
+
+        /* clear xpc_vars_part_sn2 */
+        memset((u64 *)xpc_vars_part_sn2, 0, sizeof(struct xpc_vars_part_sn2) *
+               XP_MAX_NPARTITIONS_SN2);
+
+        /* initialize the activate IRQ related amo variables */
+        for (i = 0; i < xpc_nasid_mask_nlongs; i++)
+                (void)xpc_init_IRQ_amo_sn2(XPC_ACTIVATE_IRQ_AMOS_SN2 + i);
+
+        /* initialize the engaged remote partitions related amo variables */
+        (void)xpc_init_IRQ_amo_sn2(XPC_ENGAGED_PARTITIONS_AMO_SN2);
+        (void)xpc_init_IRQ_amo_sn2(XPC_DEACTIVATE_REQUEST_AMO_SN2);
+
+        return 0;
+}
+
+static void
+xpc_increment_heartbeat_sn2(void)
+{
+        xpc_vars_sn2->heartbeat++;
+}
+
+static void
+xpc_offline_heartbeat_sn2(void)
+{
+        xpc_increment_heartbeat_sn2();
+        xpc_vars_sn2->heartbeat_offline = 1;
+}
+
+static void
+xpc_online_heartbeat_sn2(void)
+{
+        xpc_increment_heartbeat_sn2();
+        xpc_vars_sn2->heartbeat_offline = 0;
+}
+
+static void
+xpc_heartbeat_init_sn2(void)
+{
+        DBUG_ON(xpc_vars_sn2 == NULL);
+
+        bitmap_zero(xpc_vars_sn2->heartbeating_to_mask, XP_MAX_NPARTITIONS_SN2);
+        xpc_heartbeating_to_mask = &xpc_vars_sn2->heartbeating_to_mask[0];
+        xpc_online_heartbeat_sn2();
+}
+
+static void
+xpc_heartbeat_exit_sn2(void)
+{
+        xpc_offline_heartbeat_sn2();
+}
+
+static enum xp_retval
+xpc_get_remote_heartbeat_sn2(struct xpc_partition *part)
+{
+        struct xpc_vars_sn2 *remote_vars;
+        enum xp_retval ret;
+
+        remote_vars = (struct xpc_vars_sn2 *)xpc_remote_copy_buffer_sn2;
+
+        /* pull the remote vars structure that contains the heartbeat */
+        ret = xp_remote_memcpy(xp_pa(remote_vars),
+                               part->sn.sn2.remote_vars_pa,
+                               XPC_RP_VARS_SIZE);
+        if (ret != xpSuccess)
+                return ret;
+
+        dev_dbg(xpc_part, "partid=%d, heartbeat=%ld, last_heartbeat=%ld, "
+                "heartbeat_offline=%ld, HB_mask[0]=0x%lx\n", XPC_PARTID(part),
+                remote_vars->heartbeat, part->last_heartbeat,
+                remote_vars->heartbeat_offline,
+                remote_vars->heartbeating_to_mask[0]);
+
+        if ((remote_vars->heartbeat == part->last_heartbeat &&
+            remote_vars->heartbeat_offline == 0) ||
+            !xpc_hb_allowed(sn_partition_id,
+                            &remote_vars->heartbeating_to_mask)) {
+                ret = xpNoHeartbeat;
+        } else {
+                part->last_heartbeat = remote_vars->heartbeat;
+        }
+
+        return ret;
+}
+
+/*
+ * Get a copy of the remote partition's XPC variables from the reserved page.
+ *
+ * remote_vars points to a buffer that is cacheline aligned for BTE copies and
+ * assumed to be of size XPC_RP_VARS_SIZE.
+ */
+static enum xp_retval
+xpc_get_remote_vars_sn2(unsigned long remote_vars_pa,
+                        struct xpc_vars_sn2 *remote_vars)
+{
+        enum xp_retval ret;
+
+        if (remote_vars_pa == 0)
+                return xpVarsNotSet;
+
+        /* pull over the cross partition variables */
+        ret = xp_remote_memcpy(xp_pa(remote_vars), remote_vars_pa,
+                               XPC_RP_VARS_SIZE);
+        if (ret != xpSuccess)
+                return ret;
+
+        if (XPC_VERSION_MAJOR(remote_vars->version) !=
+            XPC_VERSION_MAJOR(XPC_V_VERSION)) {
+                return xpBadVersion;
+        }
+
+        return xpSuccess;
+}
+
+static void
+xpc_request_partition_activation_sn2(struct xpc_rsvd_page *remote_rp,
+                                     unsigned long remote_rp_pa, int nasid)
+{
+        xpc_send_local_activate_IRQ_sn2(nasid);
+}
+
+static void
+xpc_request_partition_reactivation_sn2(struct xpc_partition *part)
+{
+        xpc_send_local_activate_IRQ_sn2(part->sn.sn2.activate_IRQ_nasid);
+}
+
+static void
+xpc_request_partition_deactivation_sn2(struct xpc_partition *part)
+{
+        struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2;
+        unsigned long irq_flags;
+        struct amo *amo = (struct amo *)__va(part_sn2->remote_amos_page_pa +
+                                             (XPC_DEACTIVATE_REQUEST_AMO_SN2 *
+                                             sizeof(struct amo)));
+
+        local_irq_save(irq_flags);
+
+        /* set bit corresponding to our partid in remote partition's amo */
+        FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_OR,
+                         BIT(sn_partition_id));
+
+        /*
+         * We must always use the nofault function regardless of whether we
+         * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
+         * didn't, we'd never know that the other partition is down and would
+         * keep sending IRQs and amos to it until the heartbeat times out.
+         */
+        (void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo->
+                                                               variable),
+                                                     xp_nofault_PIOR_target));
+
+        local_irq_restore(irq_flags);
+
+        /*
+         * Send activate IRQ to get other side to see that we've set our
+         * bit in their deactivate request amo.
+         */
+        xpc_send_activate_IRQ_sn2(part_sn2->remote_amos_page_pa,
+                                  cnodeid_to_nasid(0),
+                                  part_sn2->activate_IRQ_nasid,
+                                  part_sn2->activate_IRQ_phys_cpuid);
+}
+
+static void
+xpc_cancel_partition_deactivation_request_sn2(struct xpc_partition *part)
+{
+        unsigned long irq_flags;
+        struct amo *amo = (struct amo *)__va(part->sn.sn2.remote_amos_page_pa +
+                                             (XPC_DEACTIVATE_REQUEST_AMO_SN2 *
+                                             sizeof(struct amo)));
+
+        local_irq_save(irq_flags);
+
+        /* clear bit corresponding to our partid in remote partition's amo */
+        FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_AND,
+                         ~BIT(sn_partition_id));
+
+        /*
+         * We must always use the nofault function regardless of whether we
+         * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
+         * didn't, we'd never know that the other partition is down and would
+         * keep sending IRQs and amos to it until the heartbeat times out.
+         */
+        (void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo->
+                                                               variable),
+                                                     xp_nofault_PIOR_target));
+
+        local_irq_restore(irq_flags);
+}
+
+static int
+xpc_partition_deactivation_requested_sn2(short partid)
+{
+        struct amo *amo = xpc_vars_sn2->amos_page +
+                          XPC_DEACTIVATE_REQUEST_AMO_SN2;
+
+        /* our partition's amo variable ANDed with partid mask */
+        return (FETCHOP_LOAD_OP(TO_AMO((u64)&amo->variable), FETCHOP_LOAD) &
+                BIT(partid)) != 0;
+}
+
+/*
+ * Update the remote partition's info.
+ */
+static void
+xpc_update_partition_info_sn2(struct xpc_partition *part, u8 remote_rp_version,
+                              unsigned long *remote_rp_ts_jiffies,
+                              unsigned long remote_rp_pa,
+                              unsigned long remote_vars_pa,
+                              struct xpc_vars_sn2 *remote_vars)
+{
+        struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2;
+
+        part->remote_rp_version = remote_rp_version;
+        dev_dbg(xpc_part, "  remote_rp_version = 0x%016x\n",
+                part->remote_rp_version);
+
+        part->remote_rp_ts_jiffies = *remote_rp_ts_jiffies;
+        dev_dbg(xpc_part, "  remote_rp_ts_jiffies = 0x%016lx\n",
+                part->remote_rp_ts_jiffies);
+
+        part->remote_rp_pa = remote_rp_pa;
+        dev_dbg(xpc_part, "  remote_rp_pa = 0x%016lx\n", part->remote_rp_pa);
+
+        part_sn2->remote_vars_pa = remote_vars_pa;
+        dev_dbg(xpc_part, "  remote_vars_pa = 0x%016lx\n",
+                part_sn2->remote_vars_pa);
+
+        part->last_heartbeat = remote_vars->heartbeat;
+        dev_dbg(xpc_part, "  last_heartbeat = 0x%016lx\n",
+                part->last_heartbeat);
+
+        part_sn2->remote_vars_part_pa = remote_vars->vars_part_pa;
+        dev_dbg(xpc_part, "  remote_vars_part_pa = 0x%016lx\n",
+                part_sn2->remote_vars_part_pa);
+
+        part_sn2->activate_IRQ_nasid = remote_vars->activate_IRQ_nasid;
+        dev_dbg(xpc_part, "  activate_IRQ_nasid = 0x%x\n",
+                part_sn2->activate_IRQ_nasid);
+
+        part_sn2->activate_IRQ_phys_cpuid =
+            remote_vars->activate_IRQ_phys_cpuid;
+        dev_dbg(xpc_part, "  activate_IRQ_phys_cpuid = 0x%x\n",
+                part_sn2->activate_IRQ_phys_cpuid);
+
+        part_sn2->remote_amos_page_pa = remote_vars->amos_page_pa;
+        dev_dbg(xpc_part, "  remote_amos_page_pa = 0x%lx\n",
+                part_sn2->remote_amos_page_pa);
+
+        part_sn2->remote_vars_version = remote_vars->version;
+        dev_dbg(xpc_part, "  remote_vars_version = 0x%x\n",
+                part_sn2->remote_vars_version);
+}
+
+/*
+ * Prior code has determined the nasid which generated a activate IRQ.
+ * Inspect that nasid to determine if its partition needs to be activated
+ * or deactivated.
+ *
+ * A partition is considered "awaiting activation" if our partition
+ * flags indicate it is not active and it has a heartbeat.  A
+ * partition is considered "awaiting deactivation" if our partition
+ * flags indicate it is active but it has no heartbeat or it is not
+ * sending its heartbeat to us.
+ *
+ * To determine the heartbeat, the remote nasid must have a properly
+ * initialized reserved page.
+ */
+static void
+xpc_identify_activate_IRQ_req_sn2(int nasid)
+{
+        struct xpc_rsvd_page *remote_rp;
+        struct xpc_vars_sn2 *remote_vars;
+        unsigned long remote_rp_pa;
+        unsigned long remote_vars_pa;
+        int remote_rp_version;
+        int reactivate = 0;
+        unsigned long remote_rp_ts_jiffies = 0;
+        short partid;
+        struct xpc_partition *part;
+        struct xpc_partition_sn2 *part_sn2;
+        enum xp_retval ret;
+
+        /* pull over the reserved page structure */
+
+        remote_rp = (struct xpc_rsvd_page *)xpc_remote_copy_buffer_sn2;
+
+        ret = xpc_get_remote_rp(nasid, NULL, remote_rp, &remote_rp_pa);
+        if (ret != xpSuccess) {
+                dev_warn(xpc_part, "unable to get reserved page from nasid %d, "
+                         "which sent interrupt, reason=%d\n", nasid, ret);
+                return;
+        }
+
+        remote_vars_pa = remote_rp->sn.vars_pa;
+        remote_rp_version = remote_rp->version;
+        remote_rp_ts_jiffies = remote_rp->ts_jiffies;
+
+        partid = remote_rp->SAL_partid;
+        part = &xpc_partitions[partid];
+        part_sn2 = &part->sn.sn2;
+
+        /* pull over the cross partition variables */
+
+        remote_vars = (struct xpc_vars_sn2 *)xpc_remote_copy_buffer_sn2;
+
+        ret = xpc_get_remote_vars_sn2(remote_vars_pa, remote_vars);
+        if (ret != xpSuccess) {
+                dev_warn(xpc_part, "unable to get XPC variables from nasid %d, "
+                         "which sent interrupt, reason=%d\n", nasid, ret);
+
+                XPC_DEACTIVATE_PARTITION(part, ret);
+                return;
+        }
+
+        part->activate_IRQ_rcvd++;
+
+        dev_dbg(xpc_part, "partid for nasid %d is %d; IRQs = %d; HB = "
+                "%ld:0x%lx\n", (int)nasid, (int)partid, part->activate_IRQ_rcvd,
+                remote_vars->heartbeat, remote_vars->heartbeating_to_mask[0]);
+
+        if (xpc_partition_disengaged(part) &&
+            part->act_state == XPC_P_AS_INACTIVE) {
+
+                xpc_update_partition_info_sn2(part, remote_rp_version,
+                                              &remote_rp_ts_jiffies,
+                                              remote_rp_pa, remote_vars_pa,
+                                              remote_vars);
+
+                if (xpc_partition_deactivation_requested_sn2(partid)) {
+                        /*
+                         * Other side is waiting on us to deactivate even though
+                         * we already have.
+                         */
+                        return;
+                }
+
+                xpc_activate_partition(part);
+                return;
+        }
+
+        DBUG_ON(part->remote_rp_version == 0);
+        DBUG_ON(part_sn2->remote_vars_version == 0);
+
+        if (remote_rp_ts_jiffies != part->remote_rp_ts_jiffies) {
+
+                /* the other side rebooted */
+
+                DBUG_ON(xpc_partition_engaged_sn2(partid));
+                DBUG_ON(xpc_partition_deactivation_requested_sn2(partid));
+
+                xpc_update_partition_info_sn2(part, remote_rp_version,
+                                              &remote_rp_ts_jiffies,
+                                              remote_rp_pa, remote_vars_pa,
+                                              remote_vars);
+                reactivate = 1;
+        }
+
+        if (part->disengage_timeout > 0 && !xpc_partition_disengaged(part)) {
+                /* still waiting on other side to disengage from us */
+                return;
+        }
+
+        if (reactivate)
+                XPC_DEACTIVATE_PARTITION(part, xpReactivating);
+        else if (xpc_partition_deactivation_requested_sn2(partid))
+                XPC_DEACTIVATE_PARTITION(part, xpOtherGoingDown);
+}
+
+/*
+ * Loop through the activation amo variables and process any bits
+ * which are set.  Each bit indicates a nasid sending a partition
+ * activation or deactivation request.
+ *
+ * Return #of IRQs detected.
+ */
+int
+xpc_identify_activate_IRQ_sender_sn2(void)
+{
+        int l;
+        int b;
+        unsigned long nasid_mask_long;
+        u64 nasid;              /* remote nasid */
+        int n_IRQs_detected = 0;
+        struct amo *act_amos;
+
+        act_amos = xpc_vars_sn2->amos_page + XPC_ACTIVATE_IRQ_AMOS_SN2;
+
+        /* scan through activate amo variables looking for non-zero entries */
+        for (l = 0; l < xpc_nasid_mask_nlongs; l++) {
+
+                if (xpc_exiting)
+                        break;
+
+                nasid_mask_long = xpc_receive_IRQ_amo_sn2(&act_amos[l]);
+
+                b = find_first_bit(&nasid_mask_long, BITS_PER_LONG);
+                if (b >= BITS_PER_LONG) {
+                        /* no IRQs from nasids in this amo variable */
+                        continue;
+                }
+
+                dev_dbg(xpc_part, "amo[%d] gave back 0x%lx\n", l,
+                        nasid_mask_long);
+
+                /*
+                 * If this nasid has been added to the machine since
+                 * our partition was reset, this will retain the
+                 * remote nasid in our reserved pages machine mask.
+                 * This is used in the event of module reload.
+                 */
+                xpc_mach_nasids[l] |= nasid_mask_long;
+
+                /* locate the nasid(s) which sent interrupts */
+
+                do {
+                        n_IRQs_detected++;
+                        nasid = (l * BITS_PER_LONG + b) * 2;
+                        dev_dbg(xpc_part, "interrupt from nasid %ld\n", nasid);
+                        xpc_identify_activate_IRQ_req_sn2(nasid);
+
+                        b = find_next_bit(&nasid_mask_long, BITS_PER_LONG,
+                                          b + 1);
+                } while (b < BITS_PER_LONG);
+        }
+        return n_IRQs_detected;
+}
+
+static void
+xpc_process_activate_IRQ_rcvd_sn2(void)
+{
+        unsigned long irq_flags;
+        int n_IRQs_expected;
+        int n_IRQs_detected;
+
+        DBUG_ON(xpc_activate_IRQ_rcvd == 0);
+
+        spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+        n_IRQs_expected = xpc_activate_IRQ_rcvd;
+        xpc_activate_IRQ_rcvd = 0;
+        spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+
+        n_IRQs_detected = xpc_identify_activate_IRQ_sender_sn2();
+        if (n_IRQs_detected < n_IRQs_expected) {
+                /* retry once to help avoid missing amo */
+                (void)xpc_identify_activate_IRQ_sender_sn2();
+        }
+}
+
+/*
+ * Setup the channel structures that are sn2 specific.
+ */
+static enum xp_retval
+xpc_setup_ch_structures_sn_sn2(struct xpc_partition *part)
+{
+        struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2;
+        struct xpc_channel_sn2 *ch_sn2;
+        enum xp_retval retval;
+        int ret;
+        int cpuid;
+        int ch_number;
+        struct timer_list *timer;
+        short partid = XPC_PARTID(part);
+
+        /* allocate all the required GET/PUT values */
+
+        part_sn2->local_GPs =
+            xpc_kzalloc_cacheline_aligned(XPC_GP_SIZE, GFP_KERNEL,
+                                          &part_sn2->local_GPs_base);
+        if (part_sn2->local_GPs == NULL) {
+                dev_err(xpc_chan, "can't get memory for local get/put "
+                        "values\n");
+                return xpNoMemory;
+        }
+
+        part_sn2->remote_GPs =
+            xpc_kzalloc_cacheline_aligned(XPC_GP_SIZE, GFP_KERNEL,
+                                          &part_sn2->remote_GPs_base);
+        if (part_sn2->remote_GPs == NULL) {
+                dev_err(xpc_chan, "can't get memory for remote get/put "
+                        "values\n");
+                retval = xpNoMemory;
+                goto out_1;
+        }
+
+        part_sn2->remote_GPs_pa = 0;
+
+        /* allocate all the required open and close args */
+
+        part_sn2->local_openclose_args =
+            xpc_kzalloc_cacheline_aligned(XPC_OPENCLOSE_ARGS_SIZE,
+                                          GFP_KERNEL, &part_sn2->
+                                          local_openclose_args_base);
+        if (part_sn2->local_openclose_args == NULL) {
+                dev_err(xpc_chan, "can't get memory for local connect args\n");
+                retval = xpNoMemory;
+                goto out_2;
+        }
+
+        part_sn2->remote_openclose_args_pa = 0;
+
+        part_sn2->local_chctl_amo_va = xpc_init_IRQ_amo_sn2(partid);
+
+        part_sn2->notify_IRQ_nasid = 0;
+        part_sn2->notify_IRQ_phys_cpuid = 0;
+        part_sn2->remote_chctl_amo_va = NULL;
+
+        sprintf(part_sn2->notify_IRQ_owner, "xpc%02d", partid);
+        ret = request_irq(SGI_XPC_NOTIFY, xpc_handle_notify_IRQ_sn2,
+                          IRQF_SHARED, part_sn2->notify_IRQ_owner,
+                          (void *)(u64)partid);
+        if (ret != 0) {
+                dev_err(xpc_chan, "can't register NOTIFY IRQ handler, "
+                        "errno=%d\n", -ret);
+                retval = xpLackOfResources;
+                goto out_3;
+        }
+
+        /* Setup a timer to check for dropped notify IRQs */
+        timer = &part_sn2->dropped_notify_IRQ_timer;
+        init_timer(timer);
+        timer->function =
+            (void (*)(unsigned long))xpc_check_for_dropped_notify_IRQ_sn2;
+        timer->data = (unsigned long)part;
+        timer->expires = jiffies + XPC_DROPPED_NOTIFY_IRQ_WAIT_INTERVAL;
+        add_timer(timer);
+
+        for (ch_number = 0; ch_number < part->nchannels; ch_number++) {
+                ch_sn2 = &part->channels[ch_number].sn.sn2;
+
+                ch_sn2->local_GP = &part_sn2->local_GPs[ch_number];
+                ch_sn2->local_openclose_args =
+                    &part_sn2->local_openclose_args[ch_number];
+
+                mutex_init(&ch_sn2->msg_to_pull_mutex);
+        }
+
+        /*
+         * Setup the per partition specific variables required by the
+         * remote partition to establish channel connections with us.
+         *
+         * The setting of the magic # indicates that these per partition
+         * specific variables are ready to be used.
+         */
+        xpc_vars_part_sn2[partid].GPs_pa = xp_pa(part_sn2->local_GPs);
+        xpc_vars_part_sn2[partid].openclose_args_pa =
+            xp_pa(part_sn2->local_openclose_args);
+        xpc_vars_part_sn2[partid].chctl_amo_pa =
+            xp_pa(part_sn2->local_chctl_amo_va);
+        cpuid = raw_smp_processor_id(); /* any CPU in this partition will do */
+        xpc_vars_part_sn2[partid].notify_IRQ_nasid = cpuid_to_nasid(cpuid);
+        xpc_vars_part_sn2[partid].notify_IRQ_phys_cpuid =
+            cpu_physical_id(cpuid);
+        xpc_vars_part_sn2[partid].nchannels = part->nchannels;
+        xpc_vars_part_sn2[partid].magic = XPC_VP_MAGIC1_SN2;
+
+        return xpSuccess;
+
+        /* setup of ch structures failed */
+out_3:
+        kfree(part_sn2->local_openclose_args_base);
+        part_sn2->local_openclose_args = NULL;
+out_2:
+        kfree(part_sn2->remote_GPs_base);
+        part_sn2->remote_GPs = NULL;
+out_1:
+        kfree(part_sn2->local_GPs_base);
+        part_sn2->local_GPs = NULL;
+        return retval;
+}
+
+/*
+ * Teardown the channel structures that are sn2 specific.
+ */
+static void
+xpc_teardown_ch_structures_sn_sn2(struct xpc_partition *part)
+{
+        struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2;
+        short partid = XPC_PARTID(part);
+
+        /*
+         * Indicate that the variables specific to the remote partition are no
+         * longer available for its use.
+         */
+        xpc_vars_part_sn2[partid].magic = 0;
+
+        /* in case we've still got outstanding timers registered... */
+        del_timer_sync(&part_sn2->dropped_notify_IRQ_timer);
+        free_irq(SGI_XPC_NOTIFY, (void *)(u64)partid);
+
+        kfree(part_sn2->local_openclose_args_base);
+        part_sn2->local_openclose_args = NULL;
+        kfree(part_sn2->remote_GPs_base);
+        part_sn2->remote_GPs = NULL;
+        kfree(part_sn2->local_GPs_base);
+        part_sn2->local_GPs = NULL;
+        part_sn2->local_chctl_amo_va = NULL;
+}
+
+/*
+ * Create a wrapper that hides the underlying mechanism for pulling a cacheline
+ * (or multiple cachelines) from a remote partition.
+ *
+ * src_pa must be a cacheline aligned physical address on the remote partition.
+ * dst must be a cacheline aligned virtual address on this partition.
+ * cnt must be cacheline sized
+ */
+/* ??? Replace this function by call to xp_remote_memcpy() or bte_copy()? */
+static enum xp_retval
+xpc_pull_remote_cachelines_sn2(struct xpc_partition *part, void *dst,
+                               const unsigned long src_pa, size_t cnt)
+{
+        enum xp_retval ret;
+
+        DBUG_ON(src_pa != L1_CACHE_ALIGN(src_pa));
+        DBUG_ON((unsigned long)dst != L1_CACHE_ALIGN((unsigned long)dst));
+        DBUG_ON(cnt != L1_CACHE_ALIGN(cnt));
+
+        if (part->act_state == XPC_P_AS_DEACTIVATING)
+                return part->reason;
+
+        ret = xp_remote_memcpy(xp_pa(dst), src_pa, cnt);
+        if (ret != xpSuccess) {
+                dev_dbg(xpc_chan, "xp_remote_memcpy() from partition %d failed,"
+                        " ret=%d\n", XPC_PARTID(part), ret);
+        }
+        return ret;
+}
+
+/*
+ * Pull the remote per partition specific variables from the specified
+ * partition.
+ */
+static enum xp_retval
+xpc_pull_remote_vars_part_sn2(struct xpc_partition *part)
+{
+        struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2;
+        u8 buffer[L1_CACHE_BYTES * 2];
+        struct xpc_vars_part_sn2 *pulled_entry_cacheline =
+            (struct xpc_vars_part_sn2 *)L1_CACHE_ALIGN((u64)buffer);
+        struct xpc_vars_part_sn2 *pulled_entry;
+        unsigned long remote_entry_cacheline_pa;
+        unsigned long remote_entry_pa;
+        short partid = XPC_PARTID(part);
+        enum xp_retval ret;
+
+        /* pull the cacheline that contains the variables we're interested in */
+
+        DBUG_ON(part_sn2->remote_vars_part_pa !=
+                L1_CACHE_ALIGN(part_sn2->remote_vars_part_pa));
+        DBUG_ON(sizeof(struct xpc_vars_part_sn2) != L1_CACHE_BYTES / 2);
+
+        remote_entry_pa = part_sn2->remote_vars_part_pa +
+            sn_partition_id * sizeof(struct xpc_vars_part_sn2);
+
+        remote_entry_cacheline_pa = (remote_entry_pa & ~(L1_CACHE_BYTES - 1));
+
+        pulled_entry = (struct xpc_vars_part_sn2 *)((u64)pulled_entry_cacheline
+                                                    + (remote_entry_pa &
+                                                    (L1_CACHE_BYTES - 1)));
+
+        ret = xpc_pull_remote_cachelines_sn2(part, pulled_entry_cacheline,
+                                             remote_entry_cacheline_pa,
+                                             L1_CACHE_BYTES);
+        if (ret != xpSuccess) {
+                dev_dbg(xpc_chan, "failed to pull XPC vars_part from "
+                        "partition %d, ret=%d\n", partid, ret);
+                return ret;
+        }
+
+        /* see if they've been set up yet */
+
+        if (pulled_entry->magic != XPC_VP_MAGIC1_SN2 &&
+            pulled_entry->magic != XPC_VP_MAGIC2_SN2) {
+
+                if (pulled_entry->magic != 0) {
+                        dev_dbg(xpc_chan, "partition %d's XPC vars_part for "
+                                "partition %d has bad magic value (=0x%lx)\n",
+                                partid, sn_partition_id, pulled_entry->magic);
+                        return xpBadMagic;
+                }
+
+                /* they've not been initialized yet */
+                return xpRetry;
+        }
+
+        if (xpc_vars_part_sn2[partid].magic == XPC_VP_MAGIC1_SN2) {
+
+                /* validate the variables */
+
+                if (pulled_entry->GPs_pa == 0 ||
+                    pulled_entry->openclose_args_pa == 0 ||
+                    pulled_entry->chctl_amo_pa == 0) {
+
+                        dev_err(xpc_chan, "partition %d's XPC vars_part for "
+                                "partition %d are not valid\n", partid,
+                                sn_partition_id);
+                        return xpInvalidAddress;
+                }
+
+                /* the variables we imported look to be valid */
+
+                part_sn2->remote_GPs_pa = pulled_entry->GPs_pa;
+                part_sn2->remote_openclose_args_pa =
+                    pulled_entry->openclose_args_pa;
+                part_sn2->remote_chctl_amo_va =
+                    (struct amo *)__va(pulled_entry->chctl_amo_pa);
+                part_sn2->notify_IRQ_nasid = pulled_entry->notify_IRQ_nasid;
+                part_sn2->notify_IRQ_phys_cpuid =
+                    pulled_entry->notify_IRQ_phys_cpuid;
+
+                if (part->nchannels > pulled_entry->nchannels)
+                        part->nchannels = pulled_entry->nchannels;
+
+                /* let the other side know that we've pulled their variables */
+
+                xpc_vars_part_sn2[partid].magic = XPC_VP_MAGIC2_SN2;
+        }
+
+        if (pulled_entry->magic == XPC_VP_MAGIC1_SN2)
+                return xpRetry;
+
+        return xpSuccess;
+}
+
+/*
+ * Establish first contact with the remote partititon. This involves pulling
+ * the XPC per partition variables from the remote partition and waiting for
+ * the remote partition to pull ours.
+ */
+static enum xp_retval
+xpc_make_first_contact_sn2(struct xpc_partition *part)
+{
+        struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2;
+        enum xp_retval ret;
+
+        /*
+         * Register the remote partition's amos with SAL so it can handle
+         * and cleanup errors within that address range should the remote
+         * partition go down. We don't unregister this range because it is
+         * difficult to tell when outstanding writes to the remote partition
+         * are finished and thus when it is safe to unregister. This should
+         * not result in wasted space in the SAL xp_addr_region table because
+         * we should get the same page for remote_amos_page_pa after module
+         * reloads and system reboots.
+         */
+        if (sn_register_xp_addr_region(part_sn2->remote_amos_page_pa,
+                                       PAGE_SIZE, 1) < 0) {
+                dev_warn(xpc_part, "xpc_activating(%d) failed to register "
+                         "xp_addr region\n", XPC_PARTID(part));
+
+                ret = xpPhysAddrRegFailed;
+                XPC_DEACTIVATE_PARTITION(part, ret);
+                return ret;
+        }
+
+        /*
+         * Send activate IRQ to get other side to activate if they've not
+         * already begun to do so.
+         */
+        xpc_send_activate_IRQ_sn2(part_sn2->remote_amos_page_pa,
+                                  cnodeid_to_nasid(0),
+                                  part_sn2->activate_IRQ_nasid,
+                                  part_sn2->activate_IRQ_phys_cpuid);
+
+        while ((ret = xpc_pull_remote_vars_part_sn2(part)) != xpSuccess) {
+                if (ret != xpRetry) {
+                        XPC_DEACTIVATE_PARTITION(part, ret);
+                        return ret;
+                }
+
+                dev_dbg(xpc_part, "waiting to make first contact with "
+                        "partition %d\n", XPC_PARTID(part));
+
+                /* wait a 1/4 of a second or so */
+                (void)msleep_interruptible(250);
+
+                if (part->act_state == XPC_P_AS_DEACTIVATING)
+                        return part->reason;
+        }
+
+        return xpSuccess;
+}
+
+/*
+ * Get the chctl flags and pull the openclose args and/or remote GPs as needed.
+ */
+static u64
+xpc_get_chctl_all_flags_sn2(struct xpc_partition *part)
+{
+        struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2;
+        unsigned long irq_flags;
+        union xpc_channel_ctl_flags chctl;
+        enum xp_retval ret;
+
+        /*
+         * See if there are any chctl flags to be handled.
+         */
+
+        spin_lock_irqsave(&part->chctl_lock, irq_flags);
+        chctl = part->chctl;
+        if (chctl.all_flags != 0)
+                part->chctl.all_flags = 0;
+
+        spin_unlock_irqrestore(&part->chctl_lock, irq_flags);
+
+        if (xpc_any_openclose_chctl_flags_set(&chctl)) {
+                ret = xpc_pull_remote_cachelines_sn2(part, part->
+                                                     remote_openclose_args,
+                                                     part_sn2->
+                                                     remote_openclose_args_pa,
+                                                     XPC_OPENCLOSE_ARGS_SIZE);
+                if (ret != xpSuccess) {
+                        XPC_DEACTIVATE_PARTITION(part, ret);
+
+                        dev_dbg(xpc_chan, "failed to pull openclose args from "
+                                "partition %d, ret=%d\n", XPC_PARTID(part),
+                                ret);
+
+                        /* don't bother processing chctl flags anymore */
+                        chctl.all_flags = 0;
+                }
+        }
+
+        if (xpc_any_msg_chctl_flags_set(&chctl)) {
+                ret = xpc_pull_remote_cachelines_sn2(part, part_sn2->remote_GPs,
+                                                     part_sn2->remote_GPs_pa,
+                                                     XPC_GP_SIZE);
+                if (ret != xpSuccess) {
+                        XPC_DEACTIVATE_PARTITION(part, ret);
+
+                        dev_dbg(xpc_chan, "failed to pull GPs from partition "
+                                "%d, ret=%d\n", XPC_PARTID(part), ret);
+
+                        /* don't bother processing chctl flags anymore */
+                        chctl.all_flags = 0;
+                }
+        }
+
+        return chctl.all_flags;
+}
+
+/*
+ * Allocate the local message queue and the notify queue.
+ */
+static enum xp_retval
+xpc_allocate_local_msgqueue_sn2(struct xpc_channel *ch)
+{
+        struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2;
+        unsigned long irq_flags;
+        int nentries;
+        size_t nbytes;
+
+        for (nentries = ch->local_nentries; nentries > 0; nentries--) {
+
+                nbytes = nentries * ch->entry_size;
+                ch_sn2->local_msgqueue =
+                    xpc_kzalloc_cacheline_aligned(nbytes, GFP_KERNEL,
+                                                  &ch_sn2->local_msgqueue_base);
+                if (ch_sn2->local_msgqueue == NULL)
+                        continue;
+
+                nbytes = nentries * sizeof(struct xpc_notify_sn2);
+                ch_sn2->notify_queue = kzalloc(nbytes, GFP_KERNEL);
+                if (ch_sn2->notify_queue == NULL) {
+                        kfree(ch_sn2->local_msgqueue_base);
+                        ch_sn2->local_msgqueue = NULL;
+                        continue;
+                }
+
+                spin_lock_irqsave(&ch->lock, irq_flags);
+                if (nentries < ch->local_nentries) {
+                        dev_dbg(xpc_chan, "nentries=%d local_nentries=%d, "
+                                "partid=%d, channel=%d\n", nentries,
+                                ch->local_nentries, ch->partid, ch->number);
+
+                        ch->local_nentries = nentries;
+                }
+                spin_unlock_irqrestore(&ch->lock, irq_flags);
+                return xpSuccess;
+        }
+
+        dev_dbg(xpc_chan, "can't get memory for local message queue and notify "
+                "queue, partid=%d, channel=%d\n", ch->partid, ch->number);
+        return xpNoMemory;
+}
+
+/*
+ * Allocate the cached remote message queue.
+ */
+static enum xp_retval
+xpc_allocate_remote_msgqueue_sn2(struct xpc_channel *ch)
+{
+        struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2;
+        unsigned long irq_flags;
+        int nentries;
+        size_t nbytes;
+
+        DBUG_ON(ch->remote_nentries <= 0);
+
+        for (nentries = ch->remote_nentries; nentries > 0; nentries--) {
+
+                nbytes = nentries * ch->entry_size;
+                ch_sn2->remote_msgqueue =
+                    xpc_kzalloc_cacheline_aligned(nbytes, GFP_KERNEL, &ch_sn2->
+                                                  remote_msgqueue_base);
+                if (ch_sn2->remote_msgqueue == NULL)
+                        continue;
+
+                spin_lock_irqsave(&ch->lock, irq_flags);
+                if (nentries < ch->remote_nentries) {
+                        dev_dbg(xpc_chan, "nentries=%d remote_nentries=%d, "
+                                "partid=%d, channel=%d\n", nentries,
+                                ch->remote_nentries, ch->partid, ch->number);
+
+                        ch->remote_nentries = nentries;
+                }
+                spin_unlock_irqrestore(&ch->lock, irq_flags);
+                return xpSuccess;
+        }
+
+        dev_dbg(xpc_chan, "can't get memory for cached remote message queue, "
+                "partid=%d, channel=%d\n", ch->partid, ch->number);
+        return xpNoMemory;
+}
+
+/*
+ * Allocate message queues and other stuff associated with a channel.
+ *
+ * Note: Assumes all of the channel sizes are filled in.
+ */
+static enum xp_retval
+xpc_setup_msg_structures_sn2(struct xpc_channel *ch)
+{
+        struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2;
+        enum xp_retval ret;
+
+        DBUG_ON(ch->flags & XPC_C_SETUP);
+
+        ret = xpc_allocate_local_msgqueue_sn2(ch);
+        if (ret == xpSuccess) {
+
+                ret = xpc_allocate_remote_msgqueue_sn2(ch);
+                if (ret != xpSuccess) {
+                        kfree(ch_sn2->local_msgqueue_base);
+                        ch_sn2->local_msgqueue = NULL;
+                        kfree(ch_sn2->notify_queue);
+                        ch_sn2->notify_queue = NULL;
+                }
+        }
+        return ret;
+}
+
+/*
+ * Free up message queues and other stuff that were allocated for the specified
+ * channel.
+ */
+static void
+xpc_teardown_msg_structures_sn2(struct xpc_channel *ch)
+{
+        struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2;
+
+        DBUG_ON(!spin_is_locked(&ch->lock));
+
+        ch_sn2->remote_msgqueue_pa = 0;
+
+        ch_sn2->local_GP->get = 0;
+        ch_sn2->local_GP->put = 0;
+        ch_sn2->remote_GP.get = 0;
+        ch_sn2->remote_GP.put = 0;
+        ch_sn2->w_local_GP.get = 0;
+        ch_sn2->w_local_GP.put = 0;
+        ch_sn2->w_remote_GP.get = 0;
+        ch_sn2->w_remote_GP.put = 0;
+        ch_sn2->next_msg_to_pull = 0;
+
+        if (ch->flags & XPC_C_SETUP) {
+                dev_dbg(xpc_chan, "ch->flags=0x%x, partid=%d, channel=%d\n",
+                        ch->flags, ch->partid, ch->number);
+
+                kfree(ch_sn2->local_msgqueue_base);
+                ch_sn2->local_msgqueue = NULL;
+                kfree(ch_sn2->remote_msgqueue_base);
+                ch_sn2->remote_msgqueue = NULL;
+                kfree(ch_sn2->notify_queue);
+                ch_sn2->notify_queue = NULL;
+        }
+}
+
+/*
+ * Notify those who wanted to be notified upon delivery of their message.
+ */
+static void
+xpc_notify_senders_sn2(struct xpc_channel *ch, enum xp_retval reason, s64 put)
+{
+        struct xpc_notify_sn2 *notify;
+        u8 notify_type;
+        s64 get = ch->sn.sn2.w_remote_GP.get - 1;
+
+        while (++get < put && atomic_read(&ch->n_to_notify) > 0) {
+
+                notify = &ch->sn.sn2.notify_queue[get % ch->local_nentries];
+
+                /*
+                 * See if the notify entry indicates it was associated with
+                 * a message who's sender wants to be notified. It is possible
+                 * that it is, but someone else is doing or has done the
+                 * notification.
+                 */
+                notify_type = notify->type;
+                if (notify_type == 0 ||
+                    cmpxchg(&notify->type, notify_type, 0) != notify_type) {
+                        continue;
+                }
+
+                DBUG_ON(notify_type != XPC_N_CALL);
+
+                atomic_dec(&ch->n_to_notify);
+
+                if (notify->func != NULL) {
+                        dev_dbg(xpc_chan, "notify->func() called, notify=0x%p "
+                                "msg_number=%ld partid=%d channel=%d\n",
+                                (void *)notify, get, ch->partid, ch->number);
+
+                        notify->func(reason, ch->partid, ch->number,
+                                     notify->key);
+
+                        dev_dbg(xpc_chan, "notify->func() returned, notify=0x%p"
+                                " msg_number=%ld partid=%d channel=%d\n",
+                                (void *)notify, get, ch->partid, ch->number);
+                }
+        }
+}
+
+static void
+xpc_notify_senders_of_disconnect_sn2(struct xpc_channel *ch)
+{
+        xpc_notify_senders_sn2(ch, ch->reason, ch->sn.sn2.w_local_GP.put);
+}
+
+/*
+ * Clear some of the msg flags in the local message queue.
+ */
+static inline void
+xpc_clear_local_msgqueue_flags_sn2(struct xpc_channel *ch)
+{
+        struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2;
+        struct xpc_msg_sn2 *msg;
+        s64 get;
+
+        get = ch_sn2->w_remote_GP.get;
+        do {
+                msg = (struct xpc_msg_sn2 *)((u64)ch_sn2->local_msgqueue +
+                                             (get % ch->local_nentries) *
+                                             ch->entry_size);
+                msg->flags = 0;
+        } while (++get < ch_sn2->remote_GP.get);
+}
+
+/*
+ * Clear some of the msg flags in the remote message queue.
+ */
+static inline void
+xpc_clear_remote_msgqueue_flags_sn2(struct xpc_channel *ch)
+{
+        struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2;
+        struct xpc_msg_sn2 *msg;
+        s64 put;
+
+        put = ch_sn2->w_remote_GP.put;
+        do {
+                msg = (struct xpc_msg_sn2 *)((u64)ch_sn2->remote_msgqueue +
+                                             (put % ch->remote_nentries) *
+                                             ch->entry_size);
+                msg->flags = 0;
+        } while (++put < ch_sn2->remote_GP.put);
+}
+
+static int
+xpc_n_of_deliverable_payloads_sn2(struct xpc_channel *ch)
+{
+        return ch->sn.sn2.w_remote_GP.put - ch->sn.sn2.w_local_GP.get;
+}
+
+static void
+xpc_process_msg_chctl_flags_sn2(struct xpc_partition *part, int ch_number)
+{
+        struct xpc_channel *ch = &part->channels[ch_number];
+        struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2;
+        int npayloads_sent;
+
+        ch_sn2->remote_GP = part->sn.sn2.remote_GPs[ch_number];
+
+        /* See what, if anything, has changed for each connected channel */
+
+        xpc_msgqueue_ref(ch);
+
+        if (ch_sn2->w_remote_GP.get == ch_sn2->remote_GP.get &&
+            ch_sn2->w_remote_GP.put == ch_sn2->remote_GP.put) {
+                /* nothing changed since GPs were last pulled */
+                xpc_msgqueue_deref(ch);
+                return;
+        }
+
+        if (!(ch->flags & XPC_C_CONNECTED)) {
+                xpc_msgqueue_deref(ch);
+                return;
+        }
+
+        /*
+         * First check to see if messages recently sent by us have been
+         * received by the other side. (The remote GET value will have
+         * changed since we last looked at it.)
+         */
+
+        if (ch_sn2->w_remote_GP.get != ch_sn2->remote_GP.get) {
+
+                /*
+                 * We need to notify any senders that want to be notified
+                 * that their sent messages have been received by their
+                 * intended recipients. We need to do this before updating
+                 * w_remote_GP.get so that we don't allocate the same message
+                 * queue entries prematurely (see xpc_allocate_msg()).
+                 */
+                if (atomic_read(&ch->n_to_notify) > 0) {
+                        /*
+                         * Notify senders that messages sent have been
+                         * received and delivered by the other side.
+                         */
+                        xpc_notify_senders_sn2(ch, xpMsgDelivered,
+                                               ch_sn2->remote_GP.get);
+                }
+
+                /*
+                 * Clear msg->flags in previously sent messages, so that
+                 * they're ready for xpc_allocate_msg().
+                 */
+                xpc_clear_local_msgqueue_flags_sn2(ch);
+
+                ch_sn2->w_remote_GP.get = ch_sn2->remote_GP.get;
+
+                dev_dbg(xpc_chan, "w_remote_GP.get changed to %ld, partid=%d, "
+                        "channel=%d\n", ch_sn2->w_remote_GP.get, ch->partid,
+                        ch->number);
+
+                /*
+                 * If anyone was waiting for message queue entries to become
+                 * available, wake them up.
+                 */
+                if (atomic_read(&ch->n_on_msg_allocate_wq) > 0)
+                        wake_up(&ch->msg_allocate_wq);
+        }
+
+        /*
+         * Now check for newly sent messages by the other side. (The remote
+         * PUT value will have changed since we last looked at it.)
+         */
+
+        if (ch_sn2->w_remote_GP.put != ch_sn2->remote_GP.put) {
+                /*
+                 * Clear msg->flags in previously received messages, so that
+                 * they're ready for xpc_get_deliverable_payload_sn2().
+                 */
+                xpc_clear_remote_msgqueue_flags_sn2(ch);
+
+                ch_sn2->w_remote_GP.put = ch_sn2->remote_GP.put;
+
+                dev_dbg(xpc_chan, "w_remote_GP.put changed to %ld, partid=%d, "
+                        "channel=%d\n", ch_sn2->w_remote_GP.put, ch->partid,
+                        ch->number);
+
+                npayloads_sent = xpc_n_of_deliverable_payloads_sn2(ch);
+                if (npayloads_sent > 0) {
+                        dev_dbg(xpc_chan, "msgs waiting to be copied and "
+                                "delivered=%d, partid=%d, channel=%d\n",
+                                npayloads_sent, ch->partid, ch->number);
+
+                        if (ch->flags & XPC_C_CONNECTEDCALLOUT_MADE)
+                                xpc_activate_kthreads(ch, npayloads_sent);
+                }
+        }
+
+        xpc_msgqueue_deref(ch);
+}
+
+static struct xpc_msg_sn2 *
+xpc_pull_remote_msg_sn2(struct xpc_channel *ch, s64 get)
+{
+        struct xpc_partition *part = &xpc_partitions[ch->partid];
+        struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2;
+        unsigned long remote_msg_pa;
+        struct xpc_msg_sn2 *msg;
+        u32 msg_index;
+        u32 nmsgs;
+        u64 msg_offset;
+        enum xp_retval ret;
+
+        if (mutex_lock_interruptible(&ch_sn2->msg_to_pull_mutex) != 0) {
+                /* we were interrupted by a signal */
+                return NULL;
+        }
+
+        while (get >= ch_sn2->next_msg_to_pull) {
+
+                /* pull as many messages as are ready and able to be pulled */
+
+                msg_index = ch_sn2->next_msg_to_pull % ch->remote_nentries;
+
+                DBUG_ON(ch_sn2->next_msg_to_pull >= ch_sn2->w_remote_GP.put);
+                nmsgs = ch_sn2->w_remote_GP.put - ch_sn2->next_msg_to_pull;
+                if (msg_index + nmsgs > ch->remote_nentries) {
+                        /* ignore the ones that wrap the msg queue for now */
+                        nmsgs = ch->remote_nentries - msg_index;
+                }
+
+                msg_offset = msg_index * ch->entry_size;
+                msg = (struct xpc_msg_sn2 *)((u64)ch_sn2->remote_msgqueue +
+                    msg_offset);
+                remote_msg_pa = ch_sn2->remote_msgqueue_pa + msg_offset;
+
+                ret = xpc_pull_remote_cachelines_sn2(part, msg, remote_msg_pa,
+                                                     nmsgs * ch->entry_size);
+                if (ret != xpSuccess) {
+
+                        dev_dbg(xpc_chan, "failed to pull %d msgs starting with"
+                                " msg %ld from partition %d, channel=%d, "
+                                "ret=%d\n", nmsgs, ch_sn2->next_msg_to_pull,
+                                ch->partid, ch->number, ret);
+
+                        XPC_DEACTIVATE_PARTITION(part, ret);
+
+                        mutex_unlock(&ch_sn2->msg_to_pull_mutex);
+                        return NULL;
+                }
+
+                ch_sn2->next_msg_to_pull += nmsgs;
+        }
+
+        mutex_unlock(&ch_sn2->msg_to_pull_mutex);
+
+        /* return the message we were looking for */
+        msg_offset = (get % ch->remote_nentries) * ch->entry_size;
+        msg = (struct xpc_msg_sn2 *)((u64)ch_sn2->remote_msgqueue + msg_offset);
+
+        return msg;
+}
+
+/*
+ * Get the next deliverable message's payload.
+ */
+static void *
+xpc_get_deliverable_payload_sn2(struct xpc_channel *ch)
+{
+        struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2;
+        struct xpc_msg_sn2 *msg;
+        void *payload = NULL;
+        s64 get;
+
+        do {
+                if (ch->flags & XPC_C_DISCONNECTING)
+                        break;
+
+                get = ch_sn2->w_local_GP.get;
+                rmb();  /* guarantee that .get loads before .put */
+                if (get == ch_sn2->w_remote_GP.put)
+                        break;
+
+                /* There are messages waiting to be pulled and delivered.
+                 * We need to try to secure one for ourselves. We'll do this
+                 * by trying to increment w_local_GP.get and hope that no one
+                 * else beats us to it. If they do, we'll we'll simply have
+                 * to try again for the next one.
+                 */
+
+                if (cmpxchg(&ch_sn2->w_local_GP.get, get, get + 1) == get) {
+                        /* we got the entry referenced by get */
+
+                        dev_dbg(xpc_chan, "w_local_GP.get changed to %ld, "
+                                "partid=%d, channel=%d\n", get + 1,
+                                ch->partid, ch->number);
+
+                        /* pull the message from the remote partition */
+
+                        msg = xpc_pull_remote_msg_sn2(ch, get);
+
+                        DBUG_ON(msg != NULL && msg->number != get);
+                        DBUG_ON(msg != NULL && (msg->flags & XPC_M_SN2_DONE));
+                        DBUG_ON(msg != NULL && !(msg->flags & XPC_M_SN2_READY));
+
+                        payload = &msg->payload;
+                        break;
+                }
+
+        } while (1);
+
+        return payload;
+}
+
+/*
+ * Now we actually send the messages that are ready to be sent by advancing
+ * the local message queue's Put value and then send a chctl msgrequest to the
+ * recipient partition.
+ */
+static void
+xpc_send_msgs_sn2(struct xpc_channel *ch, s64 initial_put)
+{
+        struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2;
+        struct xpc_msg_sn2 *msg;
+        s64 put = initial_put + 1;
+        int send_msgrequest = 0;
+
+        while (1) {
+
+                while (1) {
+                        if (put == ch_sn2->w_local_GP.put)
+                                break;
+
+                        msg = (struct xpc_msg_sn2 *)((u64)ch_sn2->
+                                                     local_msgqueue + (put %
+                                                     ch->local_nentries) *
+                                                     ch->entry_size);
+
+                        if (!(msg->flags & XPC_M_SN2_READY))
+                                break;
+
+                        put++;
+                }
+
+                if (put == initial_put) {
+                        /* nothing's changed */
+                        break;
+                }
+
+                if (cmpxchg_rel(&ch_sn2->local_GP->put, initial_put, put) !=
+                    initial_put) {
+                        /* someone else beat us to it */
+                        DBUG_ON(ch_sn2->local_GP->put < initial_put);
+                        break;
+                }
+
+                /* we just set the new value of local_GP->put */
+
+                dev_dbg(xpc_chan, "local_GP->put changed to %ld, partid=%d, "
+                        "channel=%d\n", put, ch->partid, ch->number);
+
+                send_msgrequest = 1;
+
+                /*
+                 * We need to ensure that the message referenced by
+                 * local_GP->put is not XPC_M_SN2_READY or that local_GP->put
+                 * equals w_local_GP.put, so we'll go have a look.
+                 */
+                initial_put = put;
+        }
+
+        if (send_msgrequest)
+                xpc_send_chctl_msgrequest_sn2(ch);
+}
+
+/*
+ * Allocate an entry for a message from the message queue associated with the
+ * specified channel.
+ */
+static enum xp_retval
+xpc_allocate_msg_sn2(struct xpc_channel *ch, u32 flags,
+                     struct xpc_msg_sn2 **address_of_msg)
+{
+        struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2;
+        struct xpc_msg_sn2 *msg;
+        enum xp_retval ret;
+        s64 put;
+
+        /*
+         * Get the next available message entry from the local message queue.
+         * If none are available, we'll make sure that we grab the latest
+         * GP values.
+         */
+        ret = xpTimeout;
+
+        while (1) {
+
+                put = ch_sn2->w_local_GP.put;
+                rmb();  /* guarantee that .put loads before .get */
+                if (put - ch_sn2->w_remote_GP.get < ch->local_nentries) {
+
+                        /* There are available message entries. We need to try
+                         * to secure one for ourselves. We'll do this by trying
+                         * to increment w_local_GP.put as long as someone else
+                         * doesn't beat us to it. If they do, we'll have to
+                         * try again.
+                         */
+                        if (cmpxchg(&ch_sn2->w_local_GP.put, put, put + 1) ==
+                            put) {
+                                /* we got the entry referenced by put */
+                                break;
+                        }
+                        continue;       /* try again */
+                }
+
+                /*
+                 * There aren't any available msg entries at this time.
+                 *
+                 * In waiting for a message entry to become available,
+                 * we set a timeout in case the other side is not sending
+                 * completion interrupts. This lets us fake a notify IRQ
+                 * that will cause the notify IRQ handler to fetch the latest
+                 * GP values as if an interrupt was sent by the other side.
+                 */
+                if (ret == xpTimeout)
+                        xpc_send_chctl_local_msgrequest_sn2(ch);
+
+                if (flags & XPC_NOWAIT)
+                        return xpNoWait;
+
+                ret = xpc_allocate_msg_wait(ch);
+                if (ret != xpInterrupted && ret != xpTimeout)
+                        return ret;
+        }
+
+        /* get the message's address and initialize it */
+        msg = (struct xpc_msg_sn2 *)((u64)ch_sn2->local_msgqueue +
+                                     (put % ch->local_nentries) *
+                                     ch->entry_size);
+
+        DBUG_ON(msg->flags != 0);
+        msg->number = put;
+
+        dev_dbg(xpc_chan, "w_local_GP.put changed to %ld; msg=0x%p, "
+                "msg_number=%ld, partid=%d, channel=%d\n", put + 1,
+                (void *)msg, msg->number, ch->partid, ch->number);
+
+        *address_of_msg = msg;
+        return xpSuccess;
+}
+
+/*
+ * Common code that does the actual sending of the message by advancing the
+ * local message queue's Put value and sends a chctl msgrequest to the
+ * partition the message is being sent to.
+ */
+static enum xp_retval
+xpc_send_payload_sn2(struct xpc_channel *ch, u32 flags, void *payload,
+                     u16 payload_size, u8 notify_type, xpc_notify_func func,
+                     void *key)
+{
+        enum xp_retval ret = xpSuccess;
+        struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2;
+        struct xpc_msg_sn2 *msg = msg;
+        struct xpc_notify_sn2 *notify = notify;
+        s64 msg_number;
+        s64 put;
+
+        DBUG_ON(notify_type == XPC_N_CALL && func == NULL);
+
+        if (XPC_MSG_SIZE(payload_size) > ch->entry_size)
+                return xpPayloadTooBig;
+
+        xpc_msgqueue_ref(ch);
+
+        if (ch->flags & XPC_C_DISCONNECTING) {
+                ret = ch->reason;
+                goto out_1;
+        }
+        if (!(ch->flags & XPC_C_CONNECTED)) {
+                ret = xpNotConnected;
+                goto out_1;
+        }
+
+        ret = xpc_allocate_msg_sn2(ch, flags, &msg);
+        if (ret != xpSuccess)
+                goto out_1;
+
+        msg_number = msg->number;
+
+        if (notify_type != 0) {
+                /*
+                 * Tell the remote side to send an ACK interrupt when the
+                 * message has been delivered.
+                 */
+                msg->flags |= XPC_M_SN2_INTERRUPT;
+
+                atomic_inc(&ch->n_to_notify);
+
+                notify = &ch_sn2->notify_queue[msg_number % ch->local_nentries];
+                notify->func = func;
+                notify->key = key;
+                notify->type = notify_type;
+
+                /* ??? Is a mb() needed here? */
+
+                if (ch->flags & XPC_C_DISCONNECTING) {
+                        /*
+                         * An error occurred between our last error check and
+                         * this one. We will try to clear the type field from
+                         * the notify entry. If we succeed then
+                         * xpc_disconnect_channel() didn't already process
+                         * the notify entry.
+                         */
+                        if (cmpxchg(&notify->type, notify_type, 0) ==
+                            notify_type) {
+                                atomic_dec(&ch->n_to_notify);
+                                ret = ch->reason;
+                        }
+                        goto out_1;
+                }
+        }
+
+        memcpy(&msg->payload, payload, payload_size);
+
+        msg->flags |= XPC_M_SN2_READY;
+
+        /*
+         * The preceding store of msg->flags must occur before the following
+         * load of local_GP->put.
+         */
+        mb();
+
+        /* see if the message is next in line to be sent, if so send it */
+
+        put = ch_sn2->local_GP->put;
+        if (put == msg_number)
+                xpc_send_msgs_sn2(ch, put);
+
+out_1:
+        xpc_msgqueue_deref(ch);
+        return ret;
+}
+
+/*
+ * Now we actually acknowledge the messages that have been delivered and ack'd
+ * by advancing the cached remote message queue's Get value and if requested
+ * send a chctl msgrequest to the message sender's partition.
+ *
+ * If a message has XPC_M_SN2_INTERRUPT set, send an interrupt to the partition
+ * that sent the message.
+ */
+static void
+xpc_acknowledge_msgs_sn2(struct xpc_channel *ch, s64 initial_get, u8 msg_flags)
+{
+        struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2;
+        struct xpc_msg_sn2 *msg;
+        s64 get = initial_get + 1;
+        int send_msgrequest = 0;
+
+        while (1) {
+
+                while (1) {
+                        if (get == ch_sn2->w_local_GP.get)
+                                break;
+
+                        msg = (struct xpc_msg_sn2 *)((u64)ch_sn2->
+                                                     remote_msgqueue + (get %
+                                                     ch->remote_nentries) *
+                                                     ch->entry_size);
+
+                        if (!(msg->flags & XPC_M_SN2_DONE))
+                                break;
+
+                        msg_flags |= msg->flags;
+                        get++;
+                }
+
+                if (get == initial_get) {
+                        /* nothing's changed */
+                        break;
+                }
+
+                if (cmpxchg_rel(&ch_sn2->local_GP->get, initial_get, get) !=
+                    initial_get) {
+                        /* someone else beat us to it */
+                        DBUG_ON(ch_sn2->local_GP->get <= initial_get);
+                        break;
+                }
+
+                /* we just set the new value of local_GP->get */
+
+                dev_dbg(xpc_chan, "local_GP->get changed to %ld, partid=%d, "
+                        "channel=%d\n", get, ch->partid, ch->number);
+
+                send_msgrequest = (msg_flags & XPC_M_SN2_INTERRUPT);
+
+                /*
+                 * We need to ensure that the message referenced by
+                 * local_GP->get is not XPC_M_SN2_DONE or that local_GP->get
+                 * equals w_local_GP.get, so we'll go have a look.
+                 */
+                initial_get = get;
+        }
+
+        if (send_msgrequest)
+                xpc_send_chctl_msgrequest_sn2(ch);
+}
+
+static void
+xpc_received_payload_sn2(struct xpc_channel *ch, void *payload)
+{
+        struct xpc_msg_sn2 *msg;
+        s64 msg_number;
+        s64 get;
+
+        msg = container_of(payload, struct xpc_msg_sn2, payload);
+        msg_number = msg->number;
+
+        dev_dbg(xpc_chan, "msg=0x%p, msg_number=%ld, partid=%d, channel=%d\n",
+                (void *)msg, msg_number, ch->partid, ch->number);
+
+        DBUG_ON((((u64)msg - (u64)ch->remote_msgqueue) / ch->entry_size) !=
+                msg_number % ch->remote_nentries);
+        DBUG_ON(msg->flags & XPC_M_SN2_DONE);
+
+        msg->flags |= XPC_M_SN2_DONE;
+
+        /*
+         * The preceding store of msg->flags must occur before the following
+         * load of local_GP->get.
+         */
+        mb();
+
+        /*
+         * See if this message is next in line to be acknowledged as having
+         * been delivered.
+         */
+        get = ch->sn.sn2.local_GP->get;
+        if (get == msg_number)
+                xpc_acknowledge_msgs_sn2(ch, get, msg->flags);
+}
+
+int
+xpc_init_sn2(void)
+{
+        int ret;
+        size_t buf_size;
+
+        xpc_setup_partitions_sn = xpc_setup_partitions_sn_sn2;
+        xpc_get_partition_rsvd_page_pa = xpc_get_partition_rsvd_page_pa_sn2;
+        xpc_setup_rsvd_page_sn = xpc_setup_rsvd_page_sn_sn2;
+        xpc_increment_heartbeat = xpc_increment_heartbeat_sn2;
+        xpc_offline_heartbeat = xpc_offline_heartbeat_sn2;
+        xpc_online_heartbeat = xpc_online_heartbeat_sn2;
+        xpc_heartbeat_init = xpc_heartbeat_init_sn2;
+        xpc_heartbeat_exit = xpc_heartbeat_exit_sn2;
+        xpc_get_remote_heartbeat = xpc_get_remote_heartbeat_sn2;
+
+        xpc_request_partition_activation = xpc_request_partition_activation_sn2;
+        xpc_request_partition_reactivation =
+            xpc_request_partition_reactivation_sn2;
+        xpc_request_partition_deactivation =
+            xpc_request_partition_deactivation_sn2;
+        xpc_cancel_partition_deactivation_request =
+            xpc_cancel_partition_deactivation_request_sn2;
+
+        xpc_process_activate_IRQ_rcvd = xpc_process_activate_IRQ_rcvd_sn2;
+        xpc_setup_ch_structures_sn = xpc_setup_ch_structures_sn_sn2;
+        xpc_teardown_ch_structures_sn = xpc_teardown_ch_structures_sn_sn2;
+        xpc_make_first_contact = xpc_make_first_contact_sn2;
+
+        xpc_get_chctl_all_flags = xpc_get_chctl_all_flags_sn2;
+        xpc_send_chctl_closerequest = xpc_send_chctl_closerequest_sn2;
+        xpc_send_chctl_closereply = xpc_send_chctl_closereply_sn2;
+        xpc_send_chctl_openrequest = xpc_send_chctl_openrequest_sn2;
+        xpc_send_chctl_openreply = xpc_send_chctl_openreply_sn2;
+
+        xpc_save_remote_msgqueue_pa = xpc_save_remote_msgqueue_pa_sn2;
+
+        xpc_setup_msg_structures = xpc_setup_msg_structures_sn2;
+        xpc_teardown_msg_structures = xpc_teardown_msg_structures_sn2;
+
+        xpc_notify_senders_of_disconnect = xpc_notify_senders_of_disconnect_sn2;
+        xpc_process_msg_chctl_flags = xpc_process_msg_chctl_flags_sn2;
+        xpc_n_of_deliverable_payloads = xpc_n_of_deliverable_payloads_sn2;
+        xpc_get_deliverable_payload = xpc_get_deliverable_payload_sn2;
+
+        xpc_indicate_partition_engaged = xpc_indicate_partition_engaged_sn2;
+        xpc_indicate_partition_disengaged =
+            xpc_indicate_partition_disengaged_sn2;
+        xpc_partition_engaged = xpc_partition_engaged_sn2;
+        xpc_any_partition_engaged = xpc_any_partition_engaged_sn2;
+        xpc_assume_partition_disengaged = xpc_assume_partition_disengaged_sn2;
+
+        xpc_send_payload = xpc_send_payload_sn2;
+        xpc_received_payload = xpc_received_payload_sn2;
+
+        if (offsetof(struct xpc_msg_sn2, payload) > XPC_MSG_HDR_MAX_SIZE) {
+                dev_err(xpc_part, "header portion of struct xpc_msg_sn2 is "
+                        "larger than %d\n", XPC_MSG_HDR_MAX_SIZE);
+                return -E2BIG;
+        }
+
+        buf_size = max(XPC_RP_VARS_SIZE,
+                       XPC_RP_HEADER_SIZE + XP_NASID_MASK_BYTES_SN2);
+        xpc_remote_copy_buffer_sn2 = xpc_kmalloc_cacheline_aligned(buf_size,
+                                                                   GFP_KERNEL,
+                                              &xpc_remote_copy_buffer_base_sn2);
+        if (xpc_remote_copy_buffer_sn2 == NULL) {
+                dev_err(xpc_part, "can't get memory for remote copy buffer\n");
+                return -ENOMEM;
+        }
+
+        /* open up protections for IPI and [potentially] amo operations */
+        xpc_allow_IPI_ops_sn2();
+        xpc_allow_amo_ops_shub_wars_1_1_sn2();
+
+        /*
+         * This is safe to do before the xpc_hb_checker thread has started
+         * because the handler releases a wait queue.  If an interrupt is
+         * received before the thread is waiting, it will not go to sleep,
+         * but rather immediately process the interrupt.
+         */
+        ret = request_irq(SGI_XPC_ACTIVATE, xpc_handle_activate_IRQ_sn2, 0,
+                          "xpc hb", NULL);
+        if (ret != 0) {
+                dev_err(xpc_part, "can't register ACTIVATE IRQ handler, "
+                        "errno=%d\n", -ret);
+                xpc_disallow_IPI_ops_sn2();
+                kfree(xpc_remote_copy_buffer_base_sn2);
+        }
+        return ret;
+}
+
+void
+xpc_exit_sn2(void)
+{
+        free_irq(SGI_XPC_ACTIVATE, NULL);
+        xpc_disallow_IPI_ops_sn2();
+        kfree(xpc_remote_copy_buffer_base_sn2);
+}
diff --git a/drivers/misc/sgi-xp/xpc_uv.c b/drivers/misc/sgi-xp/xpc_uv.c
new file mode 100644
index 000000000000..1ac694c01623
--- /dev/null
+++ b/drivers/misc/sgi-xp/xpc_uv.c
@@ -0,0 +1,1443 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ */
+
+/*
+ * Cross Partition Communication (XPC) uv-based functions.
+ *
+ *     Architecture specific implementation of common functions.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <asm/uv/uv_hub.h>
+#include "../sgi-gru/gru.h"
+#include "../sgi-gru/grukservices.h"
+#include "xpc.h"
+
+static atomic64_t xpc_heartbeat_uv;
+static DECLARE_BITMAP(xpc_heartbeating_to_mask_uv, XP_MAX_NPARTITIONS_UV);
+
+#define XPC_ACTIVATE_MSG_SIZE_UV        (1 * GRU_CACHE_LINE_BYTES)
+#define XPC_NOTIFY_MSG_SIZE_UV          (2 * GRU_CACHE_LINE_BYTES)
+
+#define XPC_ACTIVATE_MQ_SIZE_UV (4 * XP_MAX_NPARTITIONS_UV * \
+                                 XPC_ACTIVATE_MSG_SIZE_UV)
+#define XPC_NOTIFY_MQ_SIZE_UV   (4 * XP_MAX_NPARTITIONS_UV * \
+                                 XPC_NOTIFY_MSG_SIZE_UV)
+
+static void *xpc_activate_mq_uv;
+static void *xpc_notify_mq_uv;
+
+static int
+xpc_setup_partitions_sn_uv(void)
+{
+        short partid;
+        struct xpc_partition_uv *part_uv;
+
+        for (partid = 0; partid < XP_MAX_NPARTITIONS_UV; partid++) {
+                part_uv = &xpc_partitions[partid].sn.uv;
+
+                spin_lock_init(&part_uv->flags_lock);
+                part_uv->remote_act_state = XPC_P_AS_INACTIVE;
+        }
+        return 0;
+}
+
+static void *
+xpc_create_gru_mq_uv(unsigned int mq_size, int cpuid, unsigned int irq,
+                     irq_handler_t irq_handler)
+{
+        int ret;
+        int nid;
+        int mq_order;
+        struct page *page;
+        void *mq;
+
+        nid = cpu_to_node(cpuid);
+        mq_order = get_order(mq_size);
+        page = alloc_pages_node(nid, GFP_KERNEL | __GFP_ZERO | GFP_THISNODE,
+                                mq_order);
+        if (page == NULL) {
+                dev_err(xpc_part, "xpc_create_gru_mq_uv() failed to alloc %d "
+                        "bytes of memory on nid=%d for GRU mq\n", mq_size, nid);
+                return NULL;
+        }
+
+        mq = page_address(page);
+        ret = gru_create_message_queue(mq, mq_size);
+        if (ret != 0) {
+                dev_err(xpc_part, "gru_create_message_queue() returned "
+                        "error=%d\n", ret);
+                free_pages((unsigned long)mq, mq_order);
+                return NULL;
+        }
+
+        /* !!! Need to do some other things to set up IRQ */
+
+        ret = request_irq(irq, irq_handler, 0, "xpc", NULL);
+        if (ret != 0) {
+                dev_err(xpc_part, "request_irq(irq=%d) returned error=%d\n",
+                        irq, ret);
+                free_pages((unsigned long)mq, mq_order);
+                return NULL;
+        }
+
+        /* !!! enable generation of irq when GRU mq op occurs to this mq */
+
+        /* ??? allow other partitions to access GRU mq? */
+
+        return mq;
+}
+
+static void
+xpc_destroy_gru_mq_uv(void *mq, unsigned int mq_size, unsigned int irq)
+{
+        /* ??? disallow other partitions to access GRU mq? */
+
+        /* !!! disable generation of irq when GRU mq op occurs to this mq */
+
+        free_irq(irq, NULL);
+
+        free_pages((unsigned long)mq, get_order(mq_size));
+}
+
+static enum xp_retval
+xpc_send_gru_msg(unsigned long mq_gpa, void *msg, size_t msg_size)
+{
+        enum xp_retval xp_ret;
+        int ret;
+
+        while (1) {
+                ret = gru_send_message_gpa(mq_gpa, msg, msg_size);
+                if (ret == MQE_OK) {
+                        xp_ret = xpSuccess;
+                        break;
+                }
+
+                if (ret == MQE_QUEUE_FULL) {
+                        dev_dbg(xpc_chan, "gru_send_message_gpa() returned "
+                                "error=MQE_QUEUE_FULL\n");
+                        /* !!! handle QLimit reached; delay & try again */
+                        /* ??? Do we add a limit to the number of retries? */
+                        (void)msleep_interruptible(10);
+                } else if (ret == MQE_CONGESTION) {
+                        dev_dbg(xpc_chan, "gru_send_message_gpa() returned "
+                                "error=MQE_CONGESTION\n");
+                        /* !!! handle LB Overflow; simply try again */
+                        /* ??? Do we add a limit to the number of retries? */
+                } else {
+                        /* !!! Currently this is MQE_UNEXPECTED_CB_ERR */
+                        dev_err(xpc_chan, "gru_send_message_gpa() returned "
+                                "error=%d\n", ret);
+                        xp_ret = xpGruSendMqError;
+                        break;
+                }
+        }
+        return xp_ret;
+}
+
+static void
+xpc_process_activate_IRQ_rcvd_uv(void)
+{
+        unsigned long irq_flags;
+        short partid;
+        struct xpc_partition *part;
+        u8 act_state_req;
+
+        DBUG_ON(xpc_activate_IRQ_rcvd == 0);
+
+        spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+        for (partid = 0; partid < XP_MAX_NPARTITIONS_UV; partid++) {
+                part = &xpc_partitions[partid];
+
+                if (part->sn.uv.act_state_req == 0)
+                        continue;
+
+                xpc_activate_IRQ_rcvd--;
+                BUG_ON(xpc_activate_IRQ_rcvd < 0);
+
+                act_state_req = part->sn.uv.act_state_req;
+                part->sn.uv.act_state_req = 0;
+                spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+
+                if (act_state_req == XPC_P_ASR_ACTIVATE_UV) {
+                        if (part->act_state == XPC_P_AS_INACTIVE)
+                                xpc_activate_partition(part);
+                        else if (part->act_state == XPC_P_AS_DEACTIVATING)
+                                XPC_DEACTIVATE_PARTITION(part, xpReactivating);
+
+                } else if (act_state_req == XPC_P_ASR_REACTIVATE_UV) {
+                        if (part->act_state == XPC_P_AS_INACTIVE)
+                                xpc_activate_partition(part);
+                        else
+                                XPC_DEACTIVATE_PARTITION(part, xpReactivating);
+
+                } else if (act_state_req == XPC_P_ASR_DEACTIVATE_UV) {
+                        XPC_DEACTIVATE_PARTITION(part, part->sn.uv.reason);
+
+                } else {
+                        BUG();
+                }
+
+                spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+                if (xpc_activate_IRQ_rcvd == 0)
+                        break;
+        }
+        spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+
+}
+
+static void
+xpc_handle_activate_mq_msg_uv(struct xpc_partition *part,
+                              struct xpc_activate_mq_msghdr_uv *msg_hdr,
+                              int *wakeup_hb_checker)
+{
+        unsigned long irq_flags;
+        struct xpc_partition_uv *part_uv = &part->sn.uv;
+        struct xpc_openclose_args *args;
+
+        part_uv->remote_act_state = msg_hdr->act_state;
+
+        switch (msg_hdr->type) {
+        case XPC_ACTIVATE_MQ_MSG_SYNC_ACT_STATE_UV:
+                /* syncing of remote_act_state was just done above */
+                break;
+
+        case XPC_ACTIVATE_MQ_MSG_INC_HEARTBEAT_UV: {
+                struct xpc_activate_mq_msg_heartbeat_req_uv *msg;
+
+                msg = container_of(msg_hdr,
+                                   struct xpc_activate_mq_msg_heartbeat_req_uv,
+                                   hdr);
+                part_uv->heartbeat = msg->heartbeat;
+                break;
+        }
+        case XPC_ACTIVATE_MQ_MSG_OFFLINE_HEARTBEAT_UV: {
+                struct xpc_activate_mq_msg_heartbeat_req_uv *msg;
+
+                msg = container_of(msg_hdr,
+                                   struct xpc_activate_mq_msg_heartbeat_req_uv,
+                                   hdr);
+                part_uv->heartbeat = msg->heartbeat;
+
+                spin_lock_irqsave(&part_uv->flags_lock, irq_flags);
+                part_uv->flags |= XPC_P_HEARTBEAT_OFFLINE_UV;
+                spin_unlock_irqrestore(&part_uv->flags_lock, irq_flags);
+                break;
+        }
+        case XPC_ACTIVATE_MQ_MSG_ONLINE_HEARTBEAT_UV: {
+                struct xpc_activate_mq_msg_heartbeat_req_uv *msg;
+
+                msg = container_of(msg_hdr,
+                                   struct xpc_activate_mq_msg_heartbeat_req_uv,
+                                   hdr);
+                part_uv->heartbeat = msg->heartbeat;
+
+                spin_lock_irqsave(&part_uv->flags_lock, irq_flags);
+                part_uv->flags &= ~XPC_P_HEARTBEAT_OFFLINE_UV;
+                spin_unlock_irqrestore(&part_uv->flags_lock, irq_flags);
+                break;
+        }
+        case XPC_ACTIVATE_MQ_MSG_ACTIVATE_REQ_UV: {
+                struct xpc_activate_mq_msg_activate_req_uv *msg;
+
+                /*
+                 * ??? Do we deal here with ts_jiffies being different
+                 * ??? if act_state != XPC_P_AS_INACTIVE instead of
+                 * ??? below?
+                 */
+                msg = container_of(msg_hdr, struct
+                                   xpc_activate_mq_msg_activate_req_uv, hdr);
+
+                spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+                if (part_uv->act_state_req == 0)
+                        xpc_activate_IRQ_rcvd++;
+                part_uv->act_state_req = XPC_P_ASR_ACTIVATE_UV;
+                part->remote_rp_pa = msg->rp_gpa; /* !!! _pa is _gpa */
+                part->remote_rp_ts_jiffies = msg_hdr->rp_ts_jiffies;
+                part_uv->remote_activate_mq_gpa = msg->activate_mq_gpa;
+                spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+
+                (*wakeup_hb_checker)++;
+                break;
+        }
+        case XPC_ACTIVATE_MQ_MSG_DEACTIVATE_REQ_UV: {
+                struct xpc_activate_mq_msg_deactivate_req_uv *msg;
+
+                msg = container_of(msg_hdr, struct
+                                   xpc_activate_mq_msg_deactivate_req_uv, hdr);
+
+                spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+                if (part_uv->act_state_req == 0)
+                        xpc_activate_IRQ_rcvd++;
+                part_uv->act_state_req = XPC_P_ASR_DEACTIVATE_UV;
+                part_uv->reason = msg->reason;
+                spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+
+                (*wakeup_hb_checker)++;
+                return;
+        }
+        case XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREQUEST_UV: {
+                struct xpc_activate_mq_msg_chctl_closerequest_uv *msg;
+
+                msg = container_of(msg_hdr, struct
+                                   xpc_activate_mq_msg_chctl_closerequest_uv,
+                                   hdr);
+                args = &part->remote_openclose_args[msg->ch_number];
+                args->reason = msg->reason;
+
+                spin_lock_irqsave(&part->chctl_lock, irq_flags);
+                part->chctl.flags[msg->ch_number] |= XPC_CHCTL_CLOSEREQUEST;
+                spin_unlock_irqrestore(&part->chctl_lock, irq_flags);
+
+                xpc_wakeup_channel_mgr(part);
+                break;
+        }
+        case XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREPLY_UV: {
+                struct xpc_activate_mq_msg_chctl_closereply_uv *msg;
+
+                msg = container_of(msg_hdr, struct
+                                   xpc_activate_mq_msg_chctl_closereply_uv,
+                                   hdr);
+
+                spin_lock_irqsave(&part->chctl_lock, irq_flags);
+                part->chctl.flags[msg->ch_number] |= XPC_CHCTL_CLOSEREPLY;
+                spin_unlock_irqrestore(&part->chctl_lock, irq_flags);
+
+                xpc_wakeup_channel_mgr(part);
+                break;
+        }
+        case XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREQUEST_UV: {
+                struct xpc_activate_mq_msg_chctl_openrequest_uv *msg;
+
+                msg = container_of(msg_hdr, struct
+                                   xpc_activate_mq_msg_chctl_openrequest_uv,
+                                   hdr);
+                args = &part->remote_openclose_args[msg->ch_number];
+                args->entry_size = msg->entry_size;
+                args->local_nentries = msg->local_nentries;
+
+                spin_lock_irqsave(&part->chctl_lock, irq_flags);
+                part->chctl.flags[msg->ch_number] |= XPC_CHCTL_OPENREQUEST;
+                spin_unlock_irqrestore(&part->chctl_lock, irq_flags);
+
+                xpc_wakeup_channel_mgr(part);
+                break;
+        }
+        case XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREPLY_UV: {
+                struct xpc_activate_mq_msg_chctl_openreply_uv *msg;
+
+                msg = container_of(msg_hdr, struct
+                                   xpc_activate_mq_msg_chctl_openreply_uv, hdr);
+                args = &part->remote_openclose_args[msg->ch_number];
+                args->remote_nentries = msg->remote_nentries;
+                args->local_nentries = msg->local_nentries;
+                args->local_msgqueue_pa = msg->local_notify_mq_gpa;
+
+                spin_lock_irqsave(&part->chctl_lock, irq_flags);
+                part->chctl.flags[msg->ch_number] |= XPC_CHCTL_OPENREPLY;
+                spin_unlock_irqrestore(&part->chctl_lock, irq_flags);
+
+                xpc_wakeup_channel_mgr(part);
+                break;
+        }
+        case XPC_ACTIVATE_MQ_MSG_MARK_ENGAGED_UV:
+                spin_lock_irqsave(&part_uv->flags_lock, irq_flags);
+                part_uv->flags |= XPC_P_ENGAGED_UV;
+                spin_unlock_irqrestore(&part_uv->flags_lock, irq_flags);
+                break;
+
+        case XPC_ACTIVATE_MQ_MSG_MARK_DISENGAGED_UV:
+                spin_lock_irqsave(&part_uv->flags_lock, irq_flags);
+                part_uv->flags &= ~XPC_P_ENGAGED_UV;
+                spin_unlock_irqrestore(&part_uv->flags_lock, irq_flags);
+                break;
+
+        default:
+                dev_err(xpc_part, "received unknown activate_mq msg type=%d "
+                        "from partition=%d\n", msg_hdr->type, XPC_PARTID(part));
+
+                /* get hb checker to deactivate from the remote partition */
+                spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+                if (part_uv->act_state_req == 0)
+                        xpc_activate_IRQ_rcvd++;
+                part_uv->act_state_req = XPC_P_ASR_DEACTIVATE_UV;
+                part_uv->reason = xpBadMsgType;
+                spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+
+                (*wakeup_hb_checker)++;
+                return;
+        }
+
+        if (msg_hdr->rp_ts_jiffies != part->remote_rp_ts_jiffies &&
+            part->remote_rp_ts_jiffies != 0) {
+                /*
+                 * ??? Does what we do here need to be sensitive to
+                 * ??? act_state or remote_act_state?
+                 */
+                spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+                if (part_uv->act_state_req == 0)
+                        xpc_activate_IRQ_rcvd++;
+                part_uv->act_state_req = XPC_P_ASR_REACTIVATE_UV;
+                spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+
+                (*wakeup_hb_checker)++;
+        }
+}
+
+static irqreturn_t
+xpc_handle_activate_IRQ_uv(int irq, void *dev_id)
+{
+        struct xpc_activate_mq_msghdr_uv *msg_hdr;
+        short partid;
+        struct xpc_partition *part;
+        int wakeup_hb_checker = 0;
+
+        while ((msg_hdr = gru_get_next_message(xpc_activate_mq_uv)) != NULL) {
+
+                partid = msg_hdr->partid;
+                if (partid < 0 || partid >= XP_MAX_NPARTITIONS_UV) {
+                        dev_err(xpc_part, "xpc_handle_activate_IRQ_uv() "
+                                "received invalid partid=0x%x in message\n",
+                                partid);
+                } else {
+                        part = &xpc_partitions[partid];
+                        if (xpc_part_ref(part)) {
+                                xpc_handle_activate_mq_msg_uv(part, msg_hdr,
+                                                            &wakeup_hb_checker);
+                                xpc_part_deref(part);
+                        }
+                }
+
+                gru_free_message(xpc_activate_mq_uv, msg_hdr);
+        }
+
+        if (wakeup_hb_checker)
+                wake_up_interruptible(&xpc_activate_IRQ_wq);
+
+        return IRQ_HANDLED;
+}
+
+static enum xp_retval
+xpc_send_activate_IRQ_uv(struct xpc_partition *part, void *msg, size_t msg_size,
+                         int msg_type)
+{
+        struct xpc_activate_mq_msghdr_uv *msg_hdr = msg;
+
+        DBUG_ON(msg_size > XPC_ACTIVATE_MSG_SIZE_UV);
+
+        msg_hdr->type = msg_type;
+        msg_hdr->partid = XPC_PARTID(part);
+        msg_hdr->act_state = part->act_state;
+        msg_hdr->rp_ts_jiffies = xpc_rsvd_page->ts_jiffies;
+
+        /* ??? Is holding a spin_lock (ch->lock) during this call a bad idea? */
+        return xpc_send_gru_msg(part->sn.uv.remote_activate_mq_gpa, msg,
+                                msg_size);
+}
+
+static void
+xpc_send_activate_IRQ_part_uv(struct xpc_partition *part, void *msg,
+                              size_t msg_size, int msg_type)
+{
+        enum xp_retval ret;
+
+        ret = xpc_send_activate_IRQ_uv(part, msg, msg_size, msg_type);
+        if (unlikely(ret != xpSuccess))
+                XPC_DEACTIVATE_PARTITION(part, ret);
+}
+
+static void
+xpc_send_activate_IRQ_ch_uv(struct xpc_channel *ch, unsigned long *irq_flags,
+                         void *msg, size_t msg_size, int msg_type)
+{
+        struct xpc_partition *part = &xpc_partitions[ch->number];
+        enum xp_retval ret;
+
+        ret = xpc_send_activate_IRQ_uv(part, msg, msg_size, msg_type);
+        if (unlikely(ret != xpSuccess)) {
+                if (irq_flags != NULL)
+                        spin_unlock_irqrestore(&ch->lock, *irq_flags);
+
+                XPC_DEACTIVATE_PARTITION(part, ret);
+
+                if (irq_flags != NULL)
+                        spin_lock_irqsave(&ch->lock, *irq_flags);
+        }
+}
+
+static void
+xpc_send_local_activate_IRQ_uv(struct xpc_partition *part, int act_state_req)
+{
+        unsigned long irq_flags;
+        struct xpc_partition_uv *part_uv = &part->sn.uv;
+
+        /*
+         * !!! Make our side think that the remote parition sent an activate
+         * !!! message our way by doing what the activate IRQ handler would
+         * !!! do had one really been sent.
+         */
+
+        spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+        if (part_uv->act_state_req == 0)
+                xpc_activate_IRQ_rcvd++;
+        part_uv->act_state_req = act_state_req;
+        spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+
+        wake_up_interruptible(&xpc_activate_IRQ_wq);
+}
+
+static enum xp_retval
+xpc_get_partition_rsvd_page_pa_uv(void *buf, u64 *cookie, unsigned long *rp_pa,
+                                  size_t *len)
+{
+        /* !!! call the UV version of sn_partition_reserved_page_pa() */
+        return xpUnsupported;
+}
+
+static int
+xpc_setup_rsvd_page_sn_uv(struct xpc_rsvd_page *rp)
+{
+        rp->sn.activate_mq_gpa = uv_gpa(xpc_activate_mq_uv);
+        return 0;
+}
+
+static void
+xpc_send_heartbeat_uv(int msg_type)
+{
+        short partid;
+        struct xpc_partition *part;
+        struct xpc_activate_mq_msg_heartbeat_req_uv msg;
+
+        /*
+         * !!! On uv we're broadcasting a heartbeat message every 5 seconds.
+         * !!! Whereas on sn2 we're bte_copy'ng the heartbeat info every 20
+         * !!! seconds. This is an increase in numalink traffic.
+         * ??? Is this good?
+         */
+
+        msg.heartbeat = atomic64_inc_return(&xpc_heartbeat_uv);
+
+        partid = find_first_bit(xpc_heartbeating_to_mask_uv,
+                                XP_MAX_NPARTITIONS_UV);
+
+        while (partid < XP_MAX_NPARTITIONS_UV) {
+                part = &xpc_partitions[partid];
+
+                xpc_send_activate_IRQ_part_uv(part, &msg, sizeof(msg),
+                                              msg_type);
+
+                partid = find_next_bit(xpc_heartbeating_to_mask_uv,
+                                       XP_MAX_NPARTITIONS_UV, partid + 1);
+        }
+}
+
+static void
+xpc_increment_heartbeat_uv(void)
+{
+        xpc_send_heartbeat_uv(XPC_ACTIVATE_MQ_MSG_INC_HEARTBEAT_UV);
+}
+
+static void
+xpc_offline_heartbeat_uv(void)
+{
+        xpc_send_heartbeat_uv(XPC_ACTIVATE_MQ_MSG_OFFLINE_HEARTBEAT_UV);
+}
+
+static void
+xpc_online_heartbeat_uv(void)
+{
+        xpc_send_heartbeat_uv(XPC_ACTIVATE_MQ_MSG_ONLINE_HEARTBEAT_UV);
+}
+
+static void
+xpc_heartbeat_init_uv(void)
+{
+        atomic64_set(&xpc_heartbeat_uv, 0);
+        bitmap_zero(xpc_heartbeating_to_mask_uv, XP_MAX_NPARTITIONS_UV);
+        xpc_heartbeating_to_mask = &xpc_heartbeating_to_mask_uv[0];
+}
+
+static void
+xpc_heartbeat_exit_uv(void)
+{
+        xpc_send_heartbeat_uv(XPC_ACTIVATE_MQ_MSG_OFFLINE_HEARTBEAT_UV);
+}
+
+static enum xp_retval
+xpc_get_remote_heartbeat_uv(struct xpc_partition *part)
+{
+        struct xpc_partition_uv *part_uv = &part->sn.uv;
+        enum xp_retval ret = xpNoHeartbeat;
+
+        if (part_uv->remote_act_state != XPC_P_AS_INACTIVE &&
+            part_uv->remote_act_state != XPC_P_AS_DEACTIVATING) {
+
+                if (part_uv->heartbeat != part->last_heartbeat ||
+                    (part_uv->flags & XPC_P_HEARTBEAT_OFFLINE_UV)) {
+
+                        part->last_heartbeat = part_uv->heartbeat;
+                        ret = xpSuccess;
+                }
+        }
+        return ret;
+}
+
+static void
+xpc_request_partition_activation_uv(struct xpc_rsvd_page *remote_rp,
+                                    unsigned long remote_rp_gpa, int nasid)
+{
+        short partid = remote_rp->SAL_partid;
+        struct xpc_partition *part = &xpc_partitions[partid];
+        struct xpc_activate_mq_msg_activate_req_uv msg;
+
+        part->remote_rp_pa = remote_rp_gpa; /* !!! _pa here is really _gpa */
+        part->remote_rp_ts_jiffies = remote_rp->ts_jiffies;
+        part->sn.uv.remote_activate_mq_gpa = remote_rp->sn.activate_mq_gpa;
+
+        /*
+         * ??? Is it a good idea to make this conditional on what is
+         * ??? potentially stale state information?
+         */
+        if (part->sn.uv.remote_act_state == XPC_P_AS_INACTIVE) {
+                msg.rp_gpa = uv_gpa(xpc_rsvd_page);
+                msg.activate_mq_gpa = xpc_rsvd_page->sn.activate_mq_gpa;
+                xpc_send_activate_IRQ_part_uv(part, &msg, sizeof(msg),
+                                           XPC_ACTIVATE_MQ_MSG_ACTIVATE_REQ_UV);
+        }
+
+        if (part->act_state == XPC_P_AS_INACTIVE)
+                xpc_send_local_activate_IRQ_uv(part, XPC_P_ASR_ACTIVATE_UV);
+}
+
+static void
+xpc_request_partition_reactivation_uv(struct xpc_partition *part)
+{
+        xpc_send_local_activate_IRQ_uv(part, XPC_P_ASR_ACTIVATE_UV);
+}
+
+static void
+xpc_request_partition_deactivation_uv(struct xpc_partition *part)
+{
+        struct xpc_activate_mq_msg_deactivate_req_uv msg;
+
+        /*
+         * ??? Is it a good idea to make this conditional on what is
+         * ??? potentially stale state information?
+         */
+        if (part->sn.uv.remote_act_state != XPC_P_AS_DEACTIVATING &&
+            part->sn.uv.remote_act_state != XPC_P_AS_INACTIVE) {
+
+                msg.reason = part->reason;
+                xpc_send_activate_IRQ_part_uv(part, &msg, sizeof(msg),
+                                         XPC_ACTIVATE_MQ_MSG_DEACTIVATE_REQ_UV);
+        }
+}
+
+static void
+xpc_cancel_partition_deactivation_request_uv(struct xpc_partition *part)
+{
+        /* nothing needs to be done */
+        return;
+}
+
+static void
+xpc_init_fifo_uv(struct xpc_fifo_head_uv *head)
+{
+        head->first = NULL;
+        head->last = NULL;
+        spin_lock_init(&head->lock);
+        head->n_entries = 0;
+}
+
+static void *
+xpc_get_fifo_entry_uv(struct xpc_fifo_head_uv *head)
+{
+        unsigned long irq_flags;
+        struct xpc_fifo_entry_uv *first;
+
+        spin_lock_irqsave(&head->lock, irq_flags);
+        first = head->first;
+        if (head->first != NULL) {
+                head->first = first->next;
+                if (head->first == NULL)
+                        head->last = NULL;
+        }
+        head->n_entries++;
+        spin_unlock_irqrestore(&head->lock, irq_flags);
+        first->next = NULL;
+        return first;
+}
+
+static void
+xpc_put_fifo_entry_uv(struct xpc_fifo_head_uv *head,
+                      struct xpc_fifo_entry_uv *last)
+{
+        unsigned long irq_flags;
+
+        last->next = NULL;
+        spin_lock_irqsave(&head->lock, irq_flags);
+        if (head->last != NULL)
+                head->last->next = last;
+        else
+                head->first = last;
+        head->last = last;
+        head->n_entries--;
+        BUG_ON(head->n_entries < 0);
+        spin_unlock_irqrestore(&head->lock, irq_flags);
+}
+
+static int
+xpc_n_of_fifo_entries_uv(struct xpc_fifo_head_uv *head)
+{
+        return head->n_entries;
+}
+
+/*
+ * Setup the channel structures that are uv specific.
+ */
+static enum xp_retval
+xpc_setup_ch_structures_sn_uv(struct xpc_partition *part)
+{
+        struct xpc_channel_uv *ch_uv;
+        int ch_number;
+
+        for (ch_number = 0; ch_number < part->nchannels; ch_number++) {
+                ch_uv = &part->channels[ch_number].sn.uv;
+
+                xpc_init_fifo_uv(&ch_uv->msg_slot_free_list);
+                xpc_init_fifo_uv(&ch_uv->recv_msg_list);
+        }
+
+        return xpSuccess;
+}
+
+/*
+ * Teardown the channel structures that are uv specific.
+ */
+static void
+xpc_teardown_ch_structures_sn_uv(struct xpc_partition *part)
+{
+        /* nothing needs to be done */
+        return;
+}
+
+static enum xp_retval
+xpc_make_first_contact_uv(struct xpc_partition *part)
+{
+        struct xpc_activate_mq_msg_uv msg;
+
+        /*
+         * We send a sync msg to get the remote partition's remote_act_state
+         * updated to our current act_state which at this point should
+         * be XPC_P_AS_ACTIVATING.
+         */
+        xpc_send_activate_IRQ_part_uv(part, &msg, sizeof(msg),
+                                      XPC_ACTIVATE_MQ_MSG_SYNC_ACT_STATE_UV);
+
+        while (part->sn.uv.remote_act_state != XPC_P_AS_ACTIVATING) {
+
+                dev_dbg(xpc_part, "waiting to make first contact with "
+                        "partition %d\n", XPC_PARTID(part));
+
+                /* wait a 1/4 of a second or so */
+                (void)msleep_interruptible(250);
+
+                if (part->act_state == XPC_P_AS_DEACTIVATING)
+                        return part->reason;
+        }
+
+        return xpSuccess;
+}
+
+static u64
+xpc_get_chctl_all_flags_uv(struct xpc_partition *part)
+{
+        unsigned long irq_flags;
+        union xpc_channel_ctl_flags chctl;
+
+        spin_lock_irqsave(&part->chctl_lock, irq_flags);
+        chctl = part->chctl;
+        if (chctl.all_flags != 0)
+                part->chctl.all_flags = 0;
+
+        spin_unlock_irqrestore(&part->chctl_lock, irq_flags);
+        return chctl.all_flags;
+}
+
+static enum xp_retval
+xpc_allocate_send_msg_slot_uv(struct xpc_channel *ch)
+{
+        struct xpc_channel_uv *ch_uv = &ch->sn.uv;
+        struct xpc_send_msg_slot_uv *msg_slot;
+        unsigned long irq_flags;
+        int nentries;
+        int entry;
+        size_t nbytes;
+
+        for (nentries = ch->local_nentries; nentries > 0; nentries--) {
+                nbytes = nentries * sizeof(struct xpc_send_msg_slot_uv);
+                ch_uv->send_msg_slots = kzalloc(nbytes, GFP_KERNEL);
+                if (ch_uv->send_msg_slots == NULL)
+                        continue;
+
+                for (entry = 0; entry < nentries; entry++) {
+                        msg_slot = &ch_uv->send_msg_slots[entry];
+
+                        msg_slot->msg_slot_number = entry;
+                        xpc_put_fifo_entry_uv(&ch_uv->msg_slot_free_list,
+                                              &msg_slot->next);
+                }
+
+                spin_lock_irqsave(&ch->lock, irq_flags);
+                if (nentries < ch->local_nentries)
+                        ch->local_nentries = nentries;
+                spin_unlock_irqrestore(&ch->lock, irq_flags);
+                return xpSuccess;
+        }
+
+        return xpNoMemory;
+}
+
+static enum xp_retval
+xpc_allocate_recv_msg_slot_uv(struct xpc_channel *ch)
+{
+        struct xpc_channel_uv *ch_uv = &ch->sn.uv;
+        struct xpc_notify_mq_msg_uv *msg_slot;
+        unsigned long irq_flags;
+        int nentries;
+        int entry;
+        size_t nbytes;
+
+        for (nentries = ch->remote_nentries; nentries > 0; nentries--) {
+                nbytes = nentries * ch->entry_size;
+                ch_uv->recv_msg_slots = kzalloc(nbytes, GFP_KERNEL);
+                if (ch_uv->recv_msg_slots == NULL)
+                        continue;
+
+                for (entry = 0; entry < nentries; entry++) {
+                        msg_slot = ch_uv->recv_msg_slots + entry *
+                            ch->entry_size;
+
+                        msg_slot->hdr.msg_slot_number = entry;
+                }
+
+                spin_lock_irqsave(&ch->lock, irq_flags);
+                if (nentries < ch->remote_nentries)
+                        ch->remote_nentries = nentries;
+                spin_unlock_irqrestore(&ch->lock, irq_flags);
+                return xpSuccess;
+        }
+
+        return xpNoMemory;
+}
+
+/*
+ * Allocate msg_slots associated with the channel.
+ */
+static enum xp_retval
+xpc_setup_msg_structures_uv(struct xpc_channel *ch)
+{
+        static enum xp_retval ret;
+        struct xpc_channel_uv *ch_uv = &ch->sn.uv;
+
+        DBUG_ON(ch->flags & XPC_C_SETUP);
+
+        ret = xpc_allocate_send_msg_slot_uv(ch);
+        if (ret == xpSuccess) {
+
+                ret = xpc_allocate_recv_msg_slot_uv(ch);
+                if (ret != xpSuccess) {
+                        kfree(ch_uv->send_msg_slots);
+                        xpc_init_fifo_uv(&ch_uv->msg_slot_free_list);
+                }
+        }
+        return ret;
+}
+
+/*
+ * Free up msg_slots and clear other stuff that were setup for the specified
+ * channel.
+ */
+static void
+xpc_teardown_msg_structures_uv(struct xpc_channel *ch)
+{
+        struct xpc_channel_uv *ch_uv = &ch->sn.uv;
+
+        DBUG_ON(!spin_is_locked(&ch->lock));
+
+        ch_uv->remote_notify_mq_gpa = 0;
+
+        if (ch->flags & XPC_C_SETUP) {
+                xpc_init_fifo_uv(&ch_uv->msg_slot_free_list);
+                kfree(ch_uv->send_msg_slots);
+                xpc_init_fifo_uv(&ch_uv->recv_msg_list);
+                kfree(ch_uv->recv_msg_slots);
+        }
+}
+
+static void
+xpc_send_chctl_closerequest_uv(struct xpc_channel *ch, unsigned long *irq_flags)
+{
+        struct xpc_activate_mq_msg_chctl_closerequest_uv msg;
+
+        msg.ch_number = ch->number;
+        msg.reason = ch->reason;
+        xpc_send_activate_IRQ_ch_uv(ch, irq_flags, &msg, sizeof(msg),
+                                    XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREQUEST_UV);
+}
+
+static void
+xpc_send_chctl_closereply_uv(struct xpc_channel *ch, unsigned long *irq_flags)
+{
+        struct xpc_activate_mq_msg_chctl_closereply_uv msg;
+
+        msg.ch_number = ch->number;
+        xpc_send_activate_IRQ_ch_uv(ch, irq_flags, &msg, sizeof(msg),
+                                    XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREPLY_UV);
+}
+
+static void
+xpc_send_chctl_openrequest_uv(struct xpc_channel *ch, unsigned long *irq_flags)
+{
+        struct xpc_activate_mq_msg_chctl_openrequest_uv msg;
+
+        msg.ch_number = ch->number;
+        msg.entry_size = ch->entry_size;
+        msg.local_nentries = ch->local_nentries;
+        xpc_send_activate_IRQ_ch_uv(ch, irq_flags, &msg, sizeof(msg),
+                                    XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREQUEST_UV);
+}
+
+static void
+xpc_send_chctl_openreply_uv(struct xpc_channel *ch, unsigned long *irq_flags)
+{
+        struct xpc_activate_mq_msg_chctl_openreply_uv msg;
+
+        msg.ch_number = ch->number;
+        msg.local_nentries = ch->local_nentries;
+        msg.remote_nentries = ch->remote_nentries;
+        msg.local_notify_mq_gpa = uv_gpa(xpc_notify_mq_uv);
+        xpc_send_activate_IRQ_ch_uv(ch, irq_flags, &msg, sizeof(msg),
+                                    XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREPLY_UV);
+}
+
+static void
+xpc_send_chctl_local_msgrequest_uv(struct xpc_partition *part, int ch_number)
+{
+        unsigned long irq_flags;
+
+        spin_lock_irqsave(&part->chctl_lock, irq_flags);
+        part->chctl.flags[ch_number] |= XPC_CHCTL_MSGREQUEST;
+        spin_unlock_irqrestore(&part->chctl_lock, irq_flags);
+
+        xpc_wakeup_channel_mgr(part);
+}
+
+static void
+xpc_save_remote_msgqueue_pa_uv(struct xpc_channel *ch,
+                               unsigned long msgqueue_pa)
+{
+        ch->sn.uv.remote_notify_mq_gpa = msgqueue_pa;
+}
+
+static void
+xpc_indicate_partition_engaged_uv(struct xpc_partition *part)
+{
+        struct xpc_activate_mq_msg_uv msg;
+
+        xpc_send_activate_IRQ_part_uv(part, &msg, sizeof(msg),
+                                      XPC_ACTIVATE_MQ_MSG_MARK_ENGAGED_UV);
+}
+
+static void
+xpc_indicate_partition_disengaged_uv(struct xpc_partition *part)
+{
+        struct xpc_activate_mq_msg_uv msg;
+
+        xpc_send_activate_IRQ_part_uv(part, &msg, sizeof(msg),
+                                      XPC_ACTIVATE_MQ_MSG_MARK_DISENGAGED_UV);
+}
+
+static void
+xpc_assume_partition_disengaged_uv(short partid)
+{
+        struct xpc_partition_uv *part_uv = &xpc_partitions[partid].sn.uv;
+        unsigned long irq_flags;
+
+        spin_lock_irqsave(&part_uv->flags_lock, irq_flags);
+        part_uv->flags &= ~XPC_P_ENGAGED_UV;
+        spin_unlock_irqrestore(&part_uv->flags_lock, irq_flags);
+}
+
+static int
+xpc_partition_engaged_uv(short partid)
+{
+        return (xpc_partitions[partid].sn.uv.flags & XPC_P_ENGAGED_UV) != 0;
+}
+
+static int
+xpc_any_partition_engaged_uv(void)
+{
+        struct xpc_partition_uv *part_uv;
+        short partid;
+
+        for (partid = 0; partid < XP_MAX_NPARTITIONS_UV; partid++) {
+                part_uv = &xpc_partitions[partid].sn.uv;
+                if ((part_uv->flags & XPC_P_ENGAGED_UV) != 0)
+                        return 1;
+        }
+        return 0;
+}
+
+static enum xp_retval
+xpc_allocate_msg_slot_uv(struct xpc_channel *ch, u32 flags,
+                         struct xpc_send_msg_slot_uv **address_of_msg_slot)
+{
+        enum xp_retval ret;
+        struct xpc_send_msg_slot_uv *msg_slot;
+        struct xpc_fifo_entry_uv *entry;
+
+        while (1) {
+                entry = xpc_get_fifo_entry_uv(&ch->sn.uv.msg_slot_free_list);
+                if (entry != NULL)
+                        break;
+
+                if (flags & XPC_NOWAIT)
+                        return xpNoWait;
+
+                ret = xpc_allocate_msg_wait(ch);
+                if (ret != xpInterrupted && ret != xpTimeout)
+                        return ret;
+        }
+
+        msg_slot = container_of(entry, struct xpc_send_msg_slot_uv, next);
+        *address_of_msg_slot = msg_slot;
+        return xpSuccess;
+}
+
+static void
+xpc_free_msg_slot_uv(struct xpc_channel *ch,
+                     struct xpc_send_msg_slot_uv *msg_slot)
+{
+        xpc_put_fifo_entry_uv(&ch->sn.uv.msg_slot_free_list, &msg_slot->next);
+
+        /* wakeup anyone waiting for a free msg slot */
+        if (atomic_read(&ch->n_on_msg_allocate_wq) > 0)
+                wake_up(&ch->msg_allocate_wq);
+}
+
+static void
+xpc_notify_sender_uv(struct xpc_channel *ch,
+                     struct xpc_send_msg_slot_uv *msg_slot,
+                     enum xp_retval reason)
+{
+        xpc_notify_func func = msg_slot->func;
+
+        if (func != NULL && cmpxchg(&msg_slot->func, func, NULL) == func) {
+
+                atomic_dec(&ch->n_to_notify);
+
+                dev_dbg(xpc_chan, "msg_slot->func() called, msg_slot=0x%p "
+                        "msg_slot_number=%d partid=%d channel=%d\n", msg_slot,
+                        msg_slot->msg_slot_number, ch->partid, ch->number);
+
+                func(reason, ch->partid, ch->number, msg_slot->key);
+
+                dev_dbg(xpc_chan, "msg_slot->func() returned, msg_slot=0x%p "
+                        "msg_slot_number=%d partid=%d channel=%d\n", msg_slot,
+                        msg_slot->msg_slot_number, ch->partid, ch->number);
+        }
+}
+
+static void
+xpc_handle_notify_mq_ack_uv(struct xpc_channel *ch,
+                            struct xpc_notify_mq_msg_uv *msg)
+{
+        struct xpc_send_msg_slot_uv *msg_slot;
+        int entry = msg->hdr.msg_slot_number % ch->local_nentries;
+
+        msg_slot = &ch->sn.uv.send_msg_slots[entry];
+
+        BUG_ON(msg_slot->msg_slot_number != msg->hdr.msg_slot_number);
+        msg_slot->msg_slot_number += ch->local_nentries;
+
+        if (msg_slot->func != NULL)
+                xpc_notify_sender_uv(ch, msg_slot, xpMsgDelivered);
+
+        xpc_free_msg_slot_uv(ch, msg_slot);
+}
+
+static void
+xpc_handle_notify_mq_msg_uv(struct xpc_partition *part,
+                            struct xpc_notify_mq_msg_uv *msg)
+{
+        struct xpc_partition_uv *part_uv = &part->sn.uv;
+        struct xpc_channel *ch;
+        struct xpc_channel_uv *ch_uv;
+        struct xpc_notify_mq_msg_uv *msg_slot;
+        unsigned long irq_flags;
+        int ch_number = msg->hdr.ch_number;
+
+        if (unlikely(ch_number >= part->nchannels)) {
+                dev_err(xpc_part, "xpc_handle_notify_IRQ_uv() received invalid "
+                        "channel number=0x%x in message from partid=%d\n",
+                        ch_number, XPC_PARTID(part));
+
+                /* get hb checker to deactivate from the remote partition */
+                spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+                if (part_uv->act_state_req == 0)
+                        xpc_activate_IRQ_rcvd++;
+                part_uv->act_state_req = XPC_P_ASR_DEACTIVATE_UV;
+                part_uv->reason = xpBadChannelNumber;
+                spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+
+                wake_up_interruptible(&xpc_activate_IRQ_wq);
+                return;
+        }
+
+        ch = &part->channels[ch_number];
+        xpc_msgqueue_ref(ch);
+
+        if (!(ch->flags & XPC_C_CONNECTED)) {
+                xpc_msgqueue_deref(ch);
+                return;
+        }
+
+        /* see if we're really dealing with an ACK for a previously sent msg */
+        if (msg->hdr.size == 0) {
+                xpc_handle_notify_mq_ack_uv(ch, msg);
+                xpc_msgqueue_deref(ch);
+                return;
+        }
+
+        /* we're dealing with a normal message sent via the notify_mq */
+        ch_uv = &ch->sn.uv;
+
+        msg_slot = (struct xpc_notify_mq_msg_uv *)((u64)ch_uv->recv_msg_slots +
+                    (msg->hdr.msg_slot_number % ch->remote_nentries) *
+                    ch->entry_size);
+
+        BUG_ON(msg->hdr.msg_slot_number != msg_slot->hdr.msg_slot_number);
+        BUG_ON(msg_slot->hdr.size != 0);
+
+        memcpy(msg_slot, msg, msg->hdr.size);
+
+        xpc_put_fifo_entry_uv(&ch_uv->recv_msg_list, &msg_slot->hdr.u.next);
+
+        if (ch->flags & XPC_C_CONNECTEDCALLOUT_MADE) {
+                /*
+                 * If there is an existing idle kthread get it to deliver
+                 * the payload, otherwise we'll have to get the channel mgr
+                 * for this partition to create a kthread to do the delivery.
+                 */
+                if (atomic_read(&ch->kthreads_idle) > 0)
+                        wake_up_nr(&ch->idle_wq, 1);
+                else
+                        xpc_send_chctl_local_msgrequest_uv(part, ch->number);
+        }
+        xpc_msgqueue_deref(ch);
+}
+
+static irqreturn_t
+xpc_handle_notify_IRQ_uv(int irq, void *dev_id)
+{
+        struct xpc_notify_mq_msg_uv *msg;
+        short partid;
+        struct xpc_partition *part;
+
+        while ((msg = gru_get_next_message(xpc_notify_mq_uv)) != NULL) {
+
+                partid = msg->hdr.partid;
+                if (partid < 0 || partid >= XP_MAX_NPARTITIONS_UV) {
+                        dev_err(xpc_part, "xpc_handle_notify_IRQ_uv() received "
+                                "invalid partid=0x%x in message\n", partid);
+                } else {
+                        part = &xpc_partitions[partid];
+
+                        if (xpc_part_ref(part)) {
+                                xpc_handle_notify_mq_msg_uv(part, msg);
+                                xpc_part_deref(part);
+                        }
+                }
+
+                gru_free_message(xpc_notify_mq_uv, msg);
+        }
+
+        return IRQ_HANDLED;
+}
+
+static int
+xpc_n_of_deliverable_payloads_uv(struct xpc_channel *ch)
+{
+        return xpc_n_of_fifo_entries_uv(&ch->sn.uv.recv_msg_list);
+}
+
+static void
+xpc_process_msg_chctl_flags_uv(struct xpc_partition *part, int ch_number)
+{
+        struct xpc_channel *ch = &part->channels[ch_number];
+        int ndeliverable_payloads;
+
+        xpc_msgqueue_ref(ch);
+
+        ndeliverable_payloads = xpc_n_of_deliverable_payloads_uv(ch);
+
+        if (ndeliverable_payloads > 0 &&
+            (ch->flags & XPC_C_CONNECTED) &&
+            (ch->flags & XPC_C_CONNECTEDCALLOUT_MADE)) {
+
+                xpc_activate_kthreads(ch, ndeliverable_payloads);
+        }
+
+        xpc_msgqueue_deref(ch);
+}
+
+static enum xp_retval
+xpc_send_payload_uv(struct xpc_channel *ch, u32 flags, void *payload,
+                    u16 payload_size, u8 notify_type, xpc_notify_func func,
+                    void *key)
+{
+        enum xp_retval ret = xpSuccess;
+        struct xpc_send_msg_slot_uv *msg_slot = NULL;
+        struct xpc_notify_mq_msg_uv *msg;
+        u8 msg_buffer[XPC_NOTIFY_MSG_SIZE_UV];
+        size_t msg_size;
+
+        DBUG_ON(notify_type != XPC_N_CALL);
+
+        msg_size = sizeof(struct xpc_notify_mq_msghdr_uv) + payload_size;
+        if (msg_size > ch->entry_size)
+                return xpPayloadTooBig;
+
+        xpc_msgqueue_ref(ch);
+
+        if (ch->flags & XPC_C_DISCONNECTING) {
+                ret = ch->reason;
+                goto out_1;
+        }
+        if (!(ch->flags & XPC_C_CONNECTED)) {
+                ret = xpNotConnected;
+                goto out_1;
+        }
+
+        ret = xpc_allocate_msg_slot_uv(ch, flags, &msg_slot);
+        if (ret != xpSuccess)
+                goto out_1;
+
+        if (func != NULL) {
+                atomic_inc(&ch->n_to_notify);
+
+                msg_slot->key = key;
+                wmb(); /* a non-NULL func must hit memory after the key */
+                msg_slot->func = func;
+
+                if (ch->flags & XPC_C_DISCONNECTING) {
+                        ret = ch->reason;
+                        goto out_2;
+                }
+        }
+
+        msg = (struct xpc_notify_mq_msg_uv *)&msg_buffer;
+        msg->hdr.partid = xp_partition_id;
+        msg->hdr.ch_number = ch->number;
+        msg->hdr.size = msg_size;
+        msg->hdr.msg_slot_number = msg_slot->msg_slot_number;
+        memcpy(&msg->payload, payload, payload_size);
+
+        ret = xpc_send_gru_msg(ch->sn.uv.remote_notify_mq_gpa, msg, msg_size);
+        if (ret == xpSuccess)
+                goto out_1;
+
+        XPC_DEACTIVATE_PARTITION(&xpc_partitions[ch->partid], ret);
+out_2:
+        if (func != NULL) {
+                /*
+                 * Try to NULL the msg_slot's func field. If we fail, then
+                 * xpc_notify_senders_of_disconnect_uv() beat us to it, in which
+                 * case we need to pretend we succeeded to send the message
+                 * since the user will get a callout for the disconnect error
+                 * by xpc_notify_senders_of_disconnect_uv(), and to also get an
+                 * error returned here will confuse them. Additionally, since
+                 * in this case the channel is being disconnected we don't need
+                 * to put the the msg_slot back on the free list.
+                 */
+                if (cmpxchg(&msg_slot->func, func, NULL) != func) {
+                        ret = xpSuccess;
+                        goto out_1;
+                }
+
+                msg_slot->key = NULL;
+                atomic_dec(&ch->n_to_notify);
+        }
+        xpc_free_msg_slot_uv(ch, msg_slot);
+out_1:
+        xpc_msgqueue_deref(ch);
+        return ret;
+}
+
+/*
+ * Tell the callers of xpc_send_notify() that the status of their payloads
+ * is unknown because the channel is now disconnecting.
+ *
+ * We don't worry about putting these msg_slots on the free list since the
+ * msg_slots themselves are about to be kfree'd.
+ */
+static void
+xpc_notify_senders_of_disconnect_uv(struct xpc_channel *ch)
+{
+        struct xpc_send_msg_slot_uv *msg_slot;
+        int entry;
+
+        DBUG_ON(!(ch->flags & XPC_C_DISCONNECTING));
+
+        for (entry = 0; entry < ch->local_nentries; entry++) {
+
+                if (atomic_read(&ch->n_to_notify) == 0)
+                        break;
+
+                msg_slot = &ch->sn.uv.send_msg_slots[entry];
+                if (msg_slot->func != NULL)
+                        xpc_notify_sender_uv(ch, msg_slot, ch->reason);
+        }
+}
+
+/*
+ * Get the next deliverable message's payload.
+ */
+static void *
+xpc_get_deliverable_payload_uv(struct xpc_channel *ch)
+{
+        struct xpc_fifo_entry_uv *entry;
+        struct xpc_notify_mq_msg_uv *msg;
+        void *payload = NULL;
+
+        if (!(ch->flags & XPC_C_DISCONNECTING)) {
+                entry = xpc_get_fifo_entry_uv(&ch->sn.uv.recv_msg_list);
+                if (entry != NULL) {
+                        msg = container_of(entry, struct xpc_notify_mq_msg_uv,
+                                           hdr.u.next);
+                        payload = &msg->payload;
+                }
+        }
+        return payload;
+}
+
+static void
+xpc_received_payload_uv(struct xpc_channel *ch, void *payload)
+{
+        struct xpc_notify_mq_msg_uv *msg;
+        enum xp_retval ret;
+
+        msg = container_of(payload, struct xpc_notify_mq_msg_uv, payload);
+
+        /* return an ACK to the sender of this message */
+
+        msg->hdr.partid = xp_partition_id;
+        msg->hdr.size = 0;      /* size of zero indicates this is an ACK */
+
+        ret = xpc_send_gru_msg(ch->sn.uv.remote_notify_mq_gpa, msg,
+                               sizeof(struct xpc_notify_mq_msghdr_uv));
+        if (ret != xpSuccess)
+                XPC_DEACTIVATE_PARTITION(&xpc_partitions[ch->partid], ret);
+
+        msg->hdr.msg_slot_number += ch->remote_nentries;
+}
+
+int
+xpc_init_uv(void)
+{
+        xpc_setup_partitions_sn = xpc_setup_partitions_sn_uv;
+        xpc_process_activate_IRQ_rcvd = xpc_process_activate_IRQ_rcvd_uv;
+        xpc_get_partition_rsvd_page_pa = xpc_get_partition_rsvd_page_pa_uv;
+        xpc_setup_rsvd_page_sn = xpc_setup_rsvd_page_sn_uv;
+        xpc_increment_heartbeat = xpc_increment_heartbeat_uv;
+        xpc_offline_heartbeat = xpc_offline_heartbeat_uv;
+        xpc_online_heartbeat = xpc_online_heartbeat_uv;
+        xpc_heartbeat_init = xpc_heartbeat_init_uv;
+        xpc_heartbeat_exit = xpc_heartbeat_exit_uv;
+        xpc_get_remote_heartbeat = xpc_get_remote_heartbeat_uv;
+
+        xpc_request_partition_activation = xpc_request_partition_activation_uv;
+        xpc_request_partition_reactivation =
+            xpc_request_partition_reactivation_uv;
+        xpc_request_partition_deactivation =
+            xpc_request_partition_deactivation_uv;
+        xpc_cancel_partition_deactivation_request =
+            xpc_cancel_partition_deactivation_request_uv;
+
+        xpc_setup_ch_structures_sn = xpc_setup_ch_structures_sn_uv;
+        xpc_teardown_ch_structures_sn = xpc_teardown_ch_structures_sn_uv;
+
+        xpc_make_first_contact = xpc_make_first_contact_uv;
+
+        xpc_get_chctl_all_flags = xpc_get_chctl_all_flags_uv;
+        xpc_send_chctl_closerequest = xpc_send_chctl_closerequest_uv;
+        xpc_send_chctl_closereply = xpc_send_chctl_closereply_uv;
+        xpc_send_chctl_openrequest = xpc_send_chctl_openrequest_uv;
+        xpc_send_chctl_openreply = xpc_send_chctl_openreply_uv;
+
+        xpc_save_remote_msgqueue_pa = xpc_save_remote_msgqueue_pa_uv;
+
+        xpc_setup_msg_structures = xpc_setup_msg_structures_uv;
+        xpc_teardown_msg_structures = xpc_teardown_msg_structures_uv;
+
+        xpc_indicate_partition_engaged = xpc_indicate_partition_engaged_uv;
+        xpc_indicate_partition_disengaged =
+            xpc_indicate_partition_disengaged_uv;
+        xpc_assume_partition_disengaged = xpc_assume_partition_disengaged_uv;
+        xpc_partition_engaged = xpc_partition_engaged_uv;
+        xpc_any_partition_engaged = xpc_any_partition_engaged_uv;
+
+        xpc_n_of_deliverable_payloads = xpc_n_of_deliverable_payloads_uv;
+        xpc_process_msg_chctl_flags = xpc_process_msg_chctl_flags_uv;
+        xpc_send_payload = xpc_send_payload_uv;
+        xpc_notify_senders_of_disconnect = xpc_notify_senders_of_disconnect_uv;
+        xpc_get_deliverable_payload = xpc_get_deliverable_payload_uv;
+        xpc_received_payload = xpc_received_payload_uv;
+
+        if (sizeof(struct xpc_notify_mq_msghdr_uv) > XPC_MSG_HDR_MAX_SIZE) {
+                dev_err(xpc_part, "xpc_notify_mq_msghdr_uv is larger than %d\n",
+                        XPC_MSG_HDR_MAX_SIZE);
+                return -E2BIG;
+        }
+
+        /* ??? The cpuid argument's value is 0, is that what we want? */
+        /* !!! The irq argument's value isn't correct. */
+        xpc_activate_mq_uv = xpc_create_gru_mq_uv(XPC_ACTIVATE_MQ_SIZE_UV, 0, 0,
+                                                  xpc_handle_activate_IRQ_uv);
+        if (xpc_activate_mq_uv == NULL)
+                return -ENOMEM;
+
+        /* ??? The cpuid argument's value is 0, is that what we want? */
+        /* !!! The irq argument's value isn't correct. */
+        xpc_notify_mq_uv = xpc_create_gru_mq_uv(XPC_NOTIFY_MQ_SIZE_UV, 0, 0,
+                                                xpc_handle_notify_IRQ_uv);
+        if (xpc_notify_mq_uv == NULL) {
+                /* !!! The irq argument's value isn't correct. */
+                xpc_destroy_gru_mq_uv(xpc_activate_mq_uv,
+                                      XPC_ACTIVATE_MQ_SIZE_UV, 0);
+                return -ENOMEM;
+        }
+
+        return 0;
+}
+
+void
+xpc_exit_uv(void)
+{
+        /* !!! The irq argument's value isn't correct. */
+        xpc_destroy_gru_mq_uv(xpc_notify_mq_uv, XPC_NOTIFY_MQ_SIZE_UV, 0);
+
+        /* !!! The irq argument's value isn't correct. */
+        xpc_destroy_gru_mq_uv(xpc_activate_mq_uv, XPC_ACTIVATE_MQ_SIZE_UV, 0);
+}
diff --git a/drivers/misc/sgi-xp/xpnet.c b/drivers/misc/sgi-xp/xpnet.c
index 822dc8e8d7f0..71513b3af708 100644
--- a/drivers/misc/sgi-xp/xpnet.c
+++ b/drivers/misc/sgi-xp/xpnet.c
@@ -21,21 +21,8 @@
  */
 
 #include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
-#include <linux/delay.h>
-#include <linux/ethtool.h>
-#include <linux/mii.h>
-#include <linux/smp.h>
-#include <linux/string.h>
-#include <asm/sn/bte.h>
-#include <asm/sn/io.h>
-#include <asm/sn/sn_sal.h>
-#include <asm/atomic.h>
 #include "xp.h"
 
 /*
@@ -57,7 +44,7 @@ struct xpnet_message {
         u16 version;            /* Version for this message */
         u16 embedded_bytes;     /* #of bytes embedded in XPC message */
         u32 magic;              /* Special number indicating this is xpnet */
-        u64 buf_pa;             /* phys address of buffer to retrieve */
+        unsigned long buf_pa;   /* phys address of buffer to retrieve */
         u32 size;               /* #of bytes in buffer */
         u8 leadin_ignore;       /* #of bytes to ignore at the beginning */
         u8 tailout_ignore;      /* #of bytes to ignore at the end */
@@ -70,11 +57,10 @@ struct xpnet_message {
  *
  * XPC expects each message to exist in an individual cacheline.
  */
-#define XPNET_MSG_SIZE          (L1_CACHE_BYTES - XPC_MSG_PAYLOAD_OFFSET)
+#define XPNET_MSG_SIZE          XPC_MSG_PAYLOAD_MAX_SIZE
 #define XPNET_MSG_DATA_MAX      \
-                (XPNET_MSG_SIZE - (u64)(&((struct xpnet_message *)0)->data))
-#define XPNET_MSG_ALIGNED_SIZE  (L1_CACHE_ALIGN(XPNET_MSG_SIZE))
-#define XPNET_MSG_NENTRIES      (PAGE_SIZE / XPNET_MSG_ALIGNED_SIZE)
+                (XPNET_MSG_SIZE - offsetof(struct xpnet_message, data))
+#define XPNET_MSG_NENTRIES      (PAGE_SIZE / XPC_MSG_MAX_SIZE)
 
 #define XPNET_MAX_KTHREADS      (XPNET_MSG_NENTRIES + 1)
 #define XPNET_MAX_IDLE_KTHREADS (XPNET_MSG_NENTRIES + 1)
@@ -105,7 +91,6 @@ struct xpnet_message {
  * then be released.
  */
 struct xpnet_pending_msg {
-        struct list_head free_list;
         struct sk_buff *skb;
         atomic_t use_count;
 };
@@ -121,7 +106,7 @@ struct net_device *xpnet_device;
  * When we are notified of other partitions activating, we add them to
  * our bitmask of partitions to which we broadcast.
  */
-static u64 xpnet_broadcast_partitions;
+static unsigned long *xpnet_broadcast_partitions;
 /* protect above */
 static DEFINE_SPINLOCK(xpnet_broadcast_lock);
 
@@ -141,16 +126,13 @@ static DEFINE_SPINLOCK(xpnet_broadcast_lock);
 #define XPNET_DEF_MTU (0x8000UL)
 
 /*
- * The partition id is encapsulated in the MAC address.  The following
- * define locates the octet the partid is in.
+ * The partid is encapsulated in the MAC address beginning in the following
+ * octet and it consists of two octets.
  */
-#define XPNET_PARTID_OCTET      1
-#define XPNET_LICENSE_OCTET     2
+#define XPNET_PARTID_OCTET      2
+
+/* Define the XPNET debug device structures to be used with dev_dbg() et al */
 
-/*
- * Define the XPNET debug device structure that is to be used with dev_dbg(),
- * dev_err(), dev_warn(), and dev_info().
- */
 struct device_driver xpnet_dbg_name = {
         .name = "xpnet"
 };
@@ -169,7 +151,8 @@ static void
 xpnet_receive(short partid, int channel, struct xpnet_message *msg)
 {
         struct sk_buff *skb;
-        bte_result_t bret;
+        void *dst;
+        enum xp_retval ret;
         struct xpnet_dev_private *priv =
             (struct xpnet_dev_private *)xpnet_device->priv;
 
@@ -201,7 +184,7 @@ xpnet_receive(short partid, int channel, struct xpnet_message *msg)
 
         /*
          * The allocated skb has some reserved space.
-         * In order to use bte_copy, we need to get the
+         * In order to use xp_remote_memcpy(), we need to get the
          * skb->data pointer moved forward.
          */
         skb_reserve(skb, (L1_CACHE_BYTES - ((u64)skb->data &
@@ -226,26 +209,21 @@ xpnet_receive(short partid, int channel, struct xpnet_message *msg)
                 skb_copy_to_linear_data(skb, &msg->data,
                                         (size_t)msg->embedded_bytes);
         } else {
+                dst = (void *)((u64)skb->data & ~(L1_CACHE_BYTES - 1));
                 dev_dbg(xpnet, "transferring buffer to the skb->data area;\n\t"
-                        "bte_copy(0x%p, 0x%p, %hu)\n", (void *)msg->buf_pa,
-                        (void *)__pa((u64)skb->data & ~(L1_CACHE_BYTES - 1)),
-                        msg->size);
-
-                bret = bte_copy(msg->buf_pa,
-                                __pa((u64)skb->data & ~(L1_CACHE_BYTES - 1)),
-                                msg->size, (BTE_NOTIFY | BTE_WACQUIRE), NULL);
+                        "xp_remote_memcpy(0x%p, 0x%p, %hu)\n", dst,
+                                          (void *)msg->buf_pa, msg->size);
 
-                if (bret != BTE_SUCCESS) {
+                ret = xp_remote_memcpy(xp_pa(dst), msg->buf_pa, msg->size);
+                if (ret != xpSuccess) {
                         /*
-                         * >>> Need better way of cleaning skb.  Currently skb
-                         * >>> appears in_use and we can't just call
-                         * >>> dev_kfree_skb.
+                         * !!! Need better way of cleaning skb.  Currently skb
+                         * !!! appears in_use and we can't just call
+                         * !!! dev_kfree_skb.
                          */
-                        dev_err(xpnet, "bte_copy(0x%p, 0x%p, 0x%hx) returned "
-                                "error=0x%x\n", (void *)msg->buf_pa,
-                                (void *)__pa((u64)skb->data &
-                                             ~(L1_CACHE_BYTES - 1)),
-                                msg->size, bret);
+                        dev_err(xpnet, "xp_remote_memcpy(0x%p, 0x%p, 0x%hx) "
+                                "returned error=0x%x\n", dst,
+                                (void *)msg->buf_pa, msg->size, ret);
 
                         xpc_received(partid, channel, (void *)msg);
 
@@ -285,9 +263,7 @@ static void
 xpnet_connection_activity(enum xp_retval reason, short partid, int channel,
                           void *data, void *key)
 {
-        long bp;
-
-        DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS);
+        DBUG_ON(partid < 0 || partid >= xp_max_npartitions);
         DBUG_ON(channel != XPC_NET_CHANNEL);
 
         switch (reason) {
@@ -299,31 +275,28 @@ xpnet_connection_activity(enum xp_retval reason, short partid, int channel,
 
         case xpConnected:       /* connection completed to a partition */
                 spin_lock_bh(&xpnet_broadcast_lock);
-                xpnet_broadcast_partitions |= 1UL << (partid - 1);
-                bp = xpnet_broadcast_partitions;
+                __set_bit(partid, xpnet_broadcast_partitions);
                 spin_unlock_bh(&xpnet_broadcast_lock);
 
                 netif_carrier_on(xpnet_device);
 
-                dev_dbg(xpnet, "%s connection created to partition %d; "
-                        "xpnet_broadcast_partitions=0x%lx\n",
-                        xpnet_device->name, partid, bp);
+                dev_dbg(xpnet, "%s connected to partition %d\n",
+                        xpnet_device->name, partid);
                 break;
 
         default:
                 spin_lock_bh(&xpnet_broadcast_lock);
-                xpnet_broadcast_partitions &= ~(1UL << (partid - 1));
-                bp = xpnet_broadcast_partitions;
+                __clear_bit(partid, xpnet_broadcast_partitions);
                 spin_unlock_bh(&xpnet_broadcast_lock);
 
-                if (bp == 0)
+                if (bitmap_empty((unsigned long *)xpnet_broadcast_partitions,
+                                 xp_max_npartitions)) {
                         netif_carrier_off(xpnet_device);
+                }
 
-                dev_dbg(xpnet, "%s disconnected from partition %d; "
-                        "xpnet_broadcast_partitions=0x%lx\n",
-                        xpnet_device->name, partid, bp);
+                dev_dbg(xpnet, "%s disconnected from partition %d\n",
+                        xpnet_device->name, partid);
                 break;
-
         }
 }
 
@@ -334,8 +307,10 @@ xpnet_dev_open(struct net_device *dev)
 
         dev_dbg(xpnet, "calling xpc_connect(%d, 0x%p, NULL, %ld, %ld, %ld, "
                 "%ld)\n", XPC_NET_CHANNEL, xpnet_connection_activity,
-                XPNET_MSG_SIZE, XPNET_MSG_NENTRIES, XPNET_MAX_KTHREADS,
-                XPNET_MAX_IDLE_KTHREADS);
+                (unsigned long)XPNET_MSG_SIZE,
+                (unsigned long)XPNET_MSG_NENTRIES,
+                (unsigned long)XPNET_MAX_KTHREADS,
+                (unsigned long)XPNET_MAX_IDLE_KTHREADS);
 
         ret = xpc_connect(XPC_NET_CHANNEL, xpnet_connection_activity, NULL,
                           XPNET_MSG_SIZE, XPNET_MSG_NENTRIES,
@@ -426,35 +401,74 @@ xpnet_send_completed(enum xp_retval reason, short partid, int channel,
         }
 }
 
+static void
+xpnet_send(struct sk_buff *skb, struct xpnet_pending_msg *queued_msg,
+           u64 start_addr, u64 end_addr, u16 embedded_bytes, int dest_partid)
+{
+        u8 msg_buffer[XPNET_MSG_SIZE];
+        struct xpnet_message *msg = (struct xpnet_message *)&msg_buffer;
+        u16 msg_size = sizeof(struct xpnet_message);
+        enum xp_retval ret;
+
+        msg->embedded_bytes = embedded_bytes;
+        if (unlikely(embedded_bytes != 0)) {
+                msg->version = XPNET_VERSION_EMBED;
+                dev_dbg(xpnet, "calling memcpy(0x%p, 0x%p, 0x%lx)\n",
+                        &msg->data, skb->data, (size_t)embedded_bytes);
+                skb_copy_from_linear_data(skb, &msg->data,
+                                          (size_t)embedded_bytes);
+                msg_size += embedded_bytes - 1;
+        } else {
+                msg->version = XPNET_VERSION;
+        }
+        msg->magic = XPNET_MAGIC;
+        msg->size = end_addr - start_addr;
+        msg->leadin_ignore = (u64)skb->data - start_addr;
+        msg->tailout_ignore = end_addr - (u64)skb_tail_pointer(skb);
+        msg->buf_pa = xp_pa((void *)start_addr);
+
+        dev_dbg(xpnet, "sending XPC message to %d:%d\n"
+                KERN_DEBUG "msg->buf_pa=0x%lx, msg->size=%u, "
+                "msg->leadin_ignore=%u, msg->tailout_ignore=%u\n",
+                dest_partid, XPC_NET_CHANNEL, msg->buf_pa, msg->size,
+                msg->leadin_ignore, msg->tailout_ignore);
+
+        atomic_inc(&queued_msg->use_count);
+
+        ret = xpc_send_notify(dest_partid, XPC_NET_CHANNEL, XPC_NOWAIT, msg,
+                              msg_size, xpnet_send_completed, queued_msg);
+        if (unlikely(ret != xpSuccess))
+                atomic_dec(&queued_msg->use_count);
+}
+
 /*
  * Network layer has formatted a packet (skb) and is ready to place it
  * "on the wire".  Prepare and send an xpnet_message to all partitions
  * which have connected with us and are targets of this packet.
  *
  * MAC-NOTE:  For the XPNET driver, the MAC address contains the
- * destination partition_id.  If the destination partition id word
- * is 0xff, this packet is to broadcast to all partitions.
+ * destination partid.  If the destination partid octets are 0xffff,
+ * this packet is to be broadcast to all connected partitions.
  */
 static int
 xpnet_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
         struct xpnet_pending_msg *queued_msg;
-        enum xp_retval ret;
-        struct xpnet_message *msg;
         u64 start_addr, end_addr;
-        long dp;
-        u8 second_mac_octet;
         short dest_partid;
-        struct xpnet_dev_private *priv;
-        u16 embedded_bytes;
-
-        priv = (struct xpnet_dev_private *)dev->priv;
+        struct xpnet_dev_private *priv = (struct xpnet_dev_private *)dev->priv;
+        u16 embedded_bytes = 0;
 
         dev_dbg(xpnet, ">skb->head=0x%p skb->data=0x%p skb->tail=0x%p "
                 "skb->end=0x%p skb->len=%d\n", (void *)skb->head,
                 (void *)skb->data, skb_tail_pointer(skb), skb_end_pointer(skb),
                 skb->len);
 
+        if (skb->data[0] == 0x33) {
+                dev_kfree_skb(skb);
+                return 0;       /* nothing needed to be done */
+        }
+
         /*
          * The xpnet_pending_msg tracks how many outstanding
          * xpc_send_notifies are relying on this skb.  When none
@@ -466,7 +480,6 @@ xpnet_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
                          "packet\n", sizeof(struct xpnet_pending_msg));
 
                 priv->stats.tx_errors++;
-
                 return -ENOMEM;
         }
 
@@ -475,7 +488,6 @@ xpnet_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
         end_addr = L1_CACHE_ALIGN((u64)skb_tail_pointer(skb));
 
         /* calculate how many bytes to embed in the XPC message */
-        embedded_bytes = 0;
         if (unlikely(skb->len <= XPNET_MSG_DATA_MAX)) {
                 /* skb->data does fit so embed */
                 embedded_bytes = skb->len;
@@ -491,82 +503,28 @@ xpnet_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
         atomic_set(&queued_msg->use_count, 1);
         queued_msg->skb = skb;
 
-        second_mac_octet = skb->data[XPNET_PARTID_OCTET];
-        if (second_mac_octet == 0xff) {
+        if (skb->data[0] == 0xff) {
                 /* we are being asked to broadcast to all partitions */
-                dp = xpnet_broadcast_partitions;
-        } else if (second_mac_octet != 0) {
-                dp = xpnet_broadcast_partitions &
-                    (1UL << (second_mac_octet - 1));
-        } else {
-                /* 0 is an invalid partid.  Ignore */
-                dp = 0;
-        }
-        dev_dbg(xpnet, "destination Partitions mask (dp) = 0x%lx\n", dp);
-
-        /*
-         * If we wanted to allow promiscuous mode to work like an
-         * unswitched network, this would be a good point to OR in a
-         * mask of partitions which should be receiving all packets.
-         */
-
-        /*
-         * Main send loop.
-         */
-        for (dest_partid = 1; dp && dest_partid < XP_MAX_PARTITIONS;
-             dest_partid++) {
+                for_each_bit(dest_partid, xpnet_broadcast_partitions,
+                             xp_max_npartitions) {
 
-                if (!(dp & (1UL << (dest_partid - 1)))) {
-                        /* not destined for this partition */
-                        continue;
+                        xpnet_send(skb, queued_msg, start_addr, end_addr,
+                                   embedded_bytes, dest_partid);
                 }
+        } else {
+                dest_partid = (short)skb->data[XPNET_PARTID_OCTET + 1];
+                dest_partid |= (short)skb->data[XPNET_PARTID_OCTET + 0] << 8;
 
-                /* remove this partition from the destinations mask */
-                dp &= ~(1UL << (dest_partid - 1));
-
-                /* found a partition to send to */
-
-                ret = xpc_allocate(dest_partid, XPC_NET_CHANNEL,
-                                   XPC_NOWAIT, (void **)&msg);
-                if (unlikely(ret != xpSuccess))
-                        continue;
-
-                msg->embedded_bytes = embedded_bytes;
-                if (unlikely(embedded_bytes != 0)) {
-                        msg->version = XPNET_VERSION_EMBED;
-                        dev_dbg(xpnet, "calling memcpy(0x%p, 0x%p, 0x%lx)\n",
-                                &msg->data, skb->data, (size_t)embedded_bytes);
-                        skb_copy_from_linear_data(skb, &msg->data,
-                                                  (size_t)embedded_bytes);
-                } else {
-                        msg->version = XPNET_VERSION;
-                }
-                msg->magic = XPNET_MAGIC;
-                msg->size = end_addr - start_addr;
-                msg->leadin_ignore = (u64)skb->data - start_addr;
-                msg->tailout_ignore = end_addr - (u64)skb_tail_pointer(skb);
-                msg->buf_pa = __pa(start_addr);
-
-                dev_dbg(xpnet, "sending XPC message to %d:%d\n"
-                        KERN_DEBUG "msg->buf_pa=0x%lx, msg->size=%u, "
-                        "msg->leadin_ignore=%u, msg->tailout_ignore=%u\n",
-                        dest_partid, XPC_NET_CHANNEL, msg->buf_pa, msg->size,
-                        msg->leadin_ignore, msg->tailout_ignore);
-
-                atomic_inc(&queued_msg->use_count);
-
-                ret = xpc_send_notify(dest_partid, XPC_NET_CHANNEL, msg,
-                                      xpnet_send_completed, queued_msg);
-                if (unlikely(ret != xpSuccess)) {
-                        atomic_dec(&queued_msg->use_count);
-                        continue;
+                if (dest_partid >= 0 &&
+                    dest_partid < xp_max_npartitions &&
+                    test_bit(dest_partid, xpnet_broadcast_partitions) != 0) {
+
+                        xpnet_send(skb, queued_msg, start_addr, end_addr,
+                                   embedded_bytes, dest_partid);
                 }
         }
 
         if (atomic_dec_return(&queued_msg->use_count) == 0) {
-                dev_dbg(xpnet, "no partitions to receive packet destined for "
-                        "%d\n", dest_partid);
-
                 dev_kfree_skb(skb);
                 kfree(queued_msg);
         }
@@ -594,23 +552,28 @@ xpnet_dev_tx_timeout(struct net_device *dev)
 static int __init
 xpnet_init(void)
 {
-        int i;
-        u32 license_num;
-        int result = -ENOMEM;
+        int result;
 
-        if (!ia64_platform_is("sn2"))
+        if (!is_shub() && !is_uv())
                 return -ENODEV;
 
         dev_info(xpnet, "registering network device %s\n", XPNET_DEVICE_NAME);
 
+        xpnet_broadcast_partitions = kzalloc(BITS_TO_LONGS(xp_max_npartitions) *
+                                             sizeof(long), GFP_KERNEL);
+        if (xpnet_broadcast_partitions == NULL)
+                return -ENOMEM;
+
         /*
          * use ether_setup() to init the majority of our device
          * structure and then override the necessary pieces.
          */
         xpnet_device = alloc_netdev(sizeof(struct xpnet_dev_private),
                                     XPNET_DEVICE_NAME, ether_setup);
-        if (xpnet_device == NULL)
+        if (xpnet_device == NULL) {
+                kfree(xpnet_broadcast_partitions);
                 return -ENOMEM;
+        }
 
         netif_carrier_off(xpnet_device);
 
@@ -628,14 +591,10 @@ xpnet_init(void)
          * MAC addresses.  We chose the first octet of the MAC to be unlikely
          * to collide with any vendor's officially issued MAC.
          */
-        xpnet_device->dev_addr[0] = 0xfe;
-        xpnet_device->dev_addr[XPNET_PARTID_OCTET] = sn_partition_id;
-        license_num = sn_partition_serial_number_val();
-        for (i = 3; i >= 0; i--) {
-                xpnet_device->dev_addr[XPNET_LICENSE_OCTET + i] =
-                    license_num & 0xff;
-                license_num = license_num >> 8;
-        }
+        xpnet_device->dev_addr[0] = 0x02;     /* locally administered, no OUI */
+
+        xpnet_device->dev_addr[XPNET_PARTID_OCTET + 1] = xp_partition_id;
+        xpnet_device->dev_addr[XPNET_PARTID_OCTET + 0] = (xp_partition_id >> 8);
 
         /*
          * ether_setup() sets this to a multicast device.  We are
@@ -651,8 +610,10 @@ xpnet_init(void)
         xpnet_device->features = NETIF_F_NO_CSUM;
 
         result = register_netdev(xpnet_device);
-        if (result != 0)
+        if (result != 0) {
                 free_netdev(xpnet_device);
+                kfree(xpnet_broadcast_partitions);
+        }
 
         return result;
 }
@@ -666,8 +627,8 @@ xpnet_exit(void)
                  xpnet_device[0].name);
 
         unregister_netdev(xpnet_device);
-
         free_netdev(xpnet_device);
+        kfree(xpnet_broadcast_partitions);
 }
 
 module_exit(xpnet_exit);
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index 66e5a5487c20..86dbb366415a 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -213,7 +213,8 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
         struct mmc_blk_data *md = mq->data;
         struct mmc_card *card = md->queue.card;
         struct mmc_blk_request brq;
-        int ret = 1, sg_pos, data_size;
+        int ret = 1, data_size, i;
+        struct scatterlist *sg;
 
         mmc_claim_host(card->host);
 
@@ -267,18 +268,22 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
 
                 mmc_queue_bounce_pre(mq);
 
+                /*
+                 * Adjust the sg list so it is the same size as the
+                 * request.
+                 */
                 if (brq.data.blocks !=
                     (req->nr_sectors >> (md->block_bits - 9))) {
                         data_size = brq.data.blocks * brq.data.blksz;
-                        for (sg_pos = 0; sg_pos < brq.data.sg_len; sg_pos++) {
-                                data_size -= mq->sg[sg_pos].length;
+                        for_each_sg(brq.data.sg, sg, brq.data.sg_len, i) {
+                                data_size -= sg->length;
                                 if (data_size <= 0) {
-                                        mq->sg[sg_pos].length += data_size;
-                                        sg_pos++;
+                                        sg->length += data_size;
+                                        i++;
                                         break;
                                 }
                         }
-                        brq.data.sg_len = sg_pos;
+                        brq.data.sg_len = i;
                 }
 
                 mmc_wait_for_req(card->host, &brq.mrq);
diff --git a/drivers/mmc/card/mmc_test.c b/drivers/mmc/card/mmc_test.c
index a067fe436301..f26b01d811ae 100644
--- a/drivers/mmc/card/mmc_test.c
+++ b/drivers/mmc/card/mmc_test.c
@@ -388,16 +388,14 @@ static int mmc_test_transfer(struct mmc_test_card *test,
         int ret, i;
         unsigned long flags;
 
-        BUG_ON(blocks * blksz > BUFFER_SIZE);
-
         if (write) {
                 for (i = 0;i < blocks * blksz;i++)
                         test->scratch[i] = i;
         } else {
-                memset(test->scratch, 0, blocks * blksz);
+                memset(test->scratch, 0, BUFFER_SIZE);
         }
         local_irq_save(flags);
-        sg_copy_from_buffer(sg, sg_len, test->scratch, blocks * blksz);
+        sg_copy_from_buffer(sg, sg_len, test->scratch, BUFFER_SIZE);
         local_irq_restore(flags);
 
         ret = mmc_test_set_blksize(test, blksz);
@@ -444,7 +442,7 @@ static int mmc_test_transfer(struct mmc_test_card *test,
                 }
         } else {
                 local_irq_save(flags);
-                sg_copy_to_buffer(sg, sg_len, test->scratch, blocks * blksz);
+                sg_copy_to_buffer(sg, sg_len, test->scratch, BUFFER_SIZE);
                 local_irq_restore(flags);
                 for (i = 0;i < blocks * blksz;i++) {
                         if (test->scratch[i] != (u8)i)
@@ -805,69 +803,6 @@ static int mmc_test_multi_xfersize_read(struct mmc_test_card *test)
         return 0;
 }
 
-static int mmc_test_bigsg_write(struct mmc_test_card *test)
-{
-        int ret;
-        unsigned int size;
-        struct scatterlist sg;
-
-        if (test->card->host->max_blk_count == 1)
-                return RESULT_UNSUP_HOST;
-
-        size = PAGE_SIZE * 2;
-        size = min(size, test->card->host->max_req_size);
-        size = min(size, test->card->host->max_seg_size);
-        size = min(size, test->card->host->max_blk_count * 512);
-
-        memset(test->buffer, 0, BUFFER_SIZE);
-
-        if (size < 1024)
-                return RESULT_UNSUP_HOST;
-
-        sg_init_table(&sg, 1);
-        sg_init_one(&sg, test->buffer, BUFFER_SIZE);
-
-        ret = mmc_test_transfer(test, &sg, 1, 0, size/512, 512, 1);
-        if (ret)
-                return ret;
-
-        return 0;
-}
-
-static int mmc_test_bigsg_read(struct mmc_test_card *test)
-{
-        int ret, i;
-        unsigned int size;
-        struct scatterlist sg;
-
-        if (test->card->host->max_blk_count == 1)
-                return RESULT_UNSUP_HOST;
-
-        size = PAGE_SIZE * 2;
-        size = min(size, test->card->host->max_req_size);
-        size = min(size, test->card->host->max_seg_size);
-        size = min(size, test->card->host->max_blk_count * 512);
-
-        if (size < 1024)
-                return RESULT_UNSUP_HOST;
-
-        memset(test->buffer, 0xCD, BUFFER_SIZE);
-
-        sg_init_table(&sg, 1);
-        sg_init_one(&sg, test->buffer, BUFFER_SIZE);
-        ret = mmc_test_transfer(test, &sg, 1, 0, size/512, 512, 0);
-        if (ret)
-                return ret;
-
-        /* mmc_test_transfer() doesn't check for read overflows */
-        for (i = size;i < BUFFER_SIZE;i++) {
-                if (test->buffer[i] != 0xCD)
-                        return RESULT_FAIL;
-        }
-
-        return 0;
-}
-
 #ifdef CONFIG_HIGHMEM
 
 static int mmc_test_write_high(struct mmc_test_card *test)
@@ -1071,20 +1006,6 @@ static const struct mmc_test_case mmc_test_cases[] = {
                 .run = mmc_test_multi_xfersize_read,
         },
 
-        {
-                .name = "Over-sized SG list write",
-                .prepare = mmc_test_prepare_write,
-                .run = mmc_test_bigsg_write,
-                .cleanup = mmc_test_cleanup,
-        },
-
-        {
-                .name = "Over-sized SG list read",
-                .prepare = mmc_test_prepare_read,
-                .run = mmc_test_bigsg_read,
-                .cleanup = mmc_test_cleanup,
-        },
-
 #ifdef CONFIG_HIGHMEM
 
         {
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 3ee5b8c3b5ce..044d84eeed7c 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -121,6 +121,7 @@ mmc_start_request(struct mmc_host *host, struct mmc_request *mrq)
 {
 #ifdef CONFIG_MMC_DEBUG
         unsigned int i, sz;
+        struct scatterlist *sg;
 #endif
 
         pr_debug("%s: starting CMD%u arg %08x flags %08x\n",
@@ -156,8 +157,8 @@ mmc_start_request(struct mmc_host *host, struct mmc_request *mrq)
 
 #ifdef CONFIG_MMC_DEBUG
                 sz = 0;
-                for (i = 0;i < mrq->data->sg_len;i++)
-                        sz += mrq->data->sg[i].length;
+                for_each_sg(mrq->data->sg, sg, mrq->data->sg_len, i)
+                        sz += sg->length;
                 BUG_ON(sz != mrq->data->blocks * mrq->data->blksz);
 #endif
 
diff --git a/drivers/mmc/host/au1xmmc.c b/drivers/mmc/host/au1xmmc.c
index 99b20917cc0f..d3f55615c099 100644
--- a/drivers/mmc/host/au1xmmc.c
+++ b/drivers/mmc/host/au1xmmc.c
@@ -61,7 +61,13 @@
 
 /* Hardware definitions */
 #define AU1XMMC_DESCRIPTOR_COUNT 1
-#define AU1XMMC_DESCRIPTOR_SIZE  2048
+
+/* max DMA seg size: 64KB on Au1100, 4MB on Au1200 */
+#ifdef CONFIG_SOC_AU1100
+#define AU1XMMC_DESCRIPTOR_SIZE 0x0000ffff
+#else   /* Au1200 */
+#define AU1XMMC_DESCRIPTOR_SIZE 0x003fffff
+#endif
 
 #define AU1XMMC_OCR (MMC_VDD_27_28 | MMC_VDD_28_29 | MMC_VDD_29_30 | \
                      MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33 | \
diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
index deb607c52c0d..fcb14c2346cc 100644
--- a/drivers/mmc/host/sdhci-pci.c
+++ b/drivers/mmc/host/sdhci-pci.c
@@ -143,7 +143,8 @@ static int jmicron_probe(struct sdhci_pci_chip *chip)
                 chip->quirks |= SDHCI_QUIRK_32BIT_DMA_ADDR |
                           SDHCI_QUIRK_32BIT_DMA_SIZE |
                           SDHCI_QUIRK_32BIT_ADMA_SIZE |
-                          SDHCI_QUIRK_RESET_AFTER_REQUEST;
+                          SDHCI_QUIRK_RESET_AFTER_REQUEST |
+                          SDHCI_QUIRK_BROKEN_SMALL_PIO;
         }
 
         /*
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 5f95e10229b5..e3a8133560a2 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -278,6 +278,15 @@ static void sdhci_transfer_pio(struct sdhci_host *host)
         else
                 mask = SDHCI_SPACE_AVAILABLE;
 
+        /*
+         * Some controllers (JMicron JMB38x) mess up the buffer bits
+         * for transfers < 4 bytes. As long as it is just one block,
+         * we can ignore the bits.
+         */
+        if ((host->quirks & SDHCI_QUIRK_BROKEN_SMALL_PIO) &&
+                (host->data->blocks == 1))
+                mask = ~0;
+
         while (readl(host->ioaddr + SDHCI_PRESENT_STATE) & mask) {
                 if (host->data->flags & MMC_DATA_READ)
                         sdhci_read_block_pio(host);
@@ -439,7 +448,7 @@ static int sdhci_adma_table_pre(struct sdhci_host *host,
 
         host->adma_addr = dma_map_single(mmc_dev(host->mmc),
                 host->adma_desc, (128 * 2 + 1) * 4, DMA_TO_DEVICE);
-        if (dma_mapping_error(mmc_dev(host->mmc), host->align_addr))
+        if (dma_mapping_error(mmc_dev(host->mmc), host->adma_addr))
                 goto unmap_entries;
         BUG_ON(host->adma_addr & 0x3);
 
@@ -645,7 +654,7 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data)
                                  * us an invalid request.
                                  */
                                 WARN_ON(1);
-                                host->flags &= ~SDHCI_USE_DMA;
+                                host->flags &= ~SDHCI_REQ_USE_DMA;
                         } else {
                                 writel(host->adma_addr,
                                         host->ioaddr + SDHCI_ADMA_ADDRESS);
@@ -664,7 +673,7 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data)
                                  * us an invalid request.
                                  */
                                 WARN_ON(1);
-                                host->flags &= ~SDHCI_USE_DMA;
+                                host->flags &= ~SDHCI_REQ_USE_DMA;
                         } else {
                                 WARN_ON(sg_cnt != 1);
                                 writel(sg_dma_address(data->sg),
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index e354faee5df0..197d4a05f4ae 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -206,6 +206,8 @@ struct sdhci_host {
 #define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER             (1<<11)
 /* Controller provides an incorrect timeout value for transfers */
 #define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL                  (1<<12)
+/* Controller has an issue with buffer bits for small transfers */
+#define SDHCI_QUIRK_BROKEN_SMALL_PIO                    (1<<13)
 
         int                     irq;            /* Device IRQ */
         void __iomem *          ioaddr;         /* Mapped address */
diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c
index dbba5abf0db8..f84ab6182148 100644
--- a/drivers/mtd/chips/jedec_probe.c
+++ b/drivers/mtd/chips/jedec_probe.c
@@ -41,7 +41,7 @@
 
 
 /* AMD */
-#define AM29DL800BB     0x22C8
+#define AM29DL800BB     0x22CB
 #define AM29DL800BT     0x224A
 
 #define AM29F800BB      0x2258
diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c
index 54e36bfc2c3b..8bd0dea6885f 100644
--- a/drivers/mtd/devices/mtd_dataflash.c
+++ b/drivers/mtd/devices/mtd_dataflash.c
@@ -15,6 +15,8 @@
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/mutex.h>
+#include <linux/err.h>
+
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
 
@@ -487,9 +489,8 @@ add_dataflash(struct spi_device *spi, char *name,
         device->write = dataflash_write;
         device->priv = priv;
 
-        dev_info(&spi->dev, "%s (%d KBytes) pagesize %d bytes, "
-                "erasesize %d bytes\n", name, device->size/1024,
-                 pagesize, pagesize * 8);       /* 8 pages = 1 block */
+        dev_info(&spi->dev, "%s (%d KBytes) pagesize %d bytes\n",
+                        name, DIV_ROUND_UP(device->size, 1024), pagesize);
         dev_set_drvdata(&spi->dev, priv);
 
         if (mtd_has_partitions()) {
@@ -518,65 +519,57 @@ add_dataflash(struct spi_device *spi, char *name,
         return add_mtd_device(device) == 1 ? -ENODEV : 0;
 }
 
-/*
- * Detect and initialize DataFlash device:
- *
- *   Device      Density         ID code          #Pages PageSize  Offset
- *   AT45DB011B  1Mbit   (128K)  xx0011xx (0x0c)    512    264      9
- *   AT45DB021B  2Mbit   (256K)  xx0101xx (0x14)   1024    264      9
- *   AT45DB041B  4Mbit   (512K)  xx0111xx (0x1c)   2048    264      9
- *   AT45DB081B  8Mbit   (1M)    xx1001xx (0x24)   4096    264      9
- *   AT45DB0161B 16Mbit  (2M)    xx1011xx (0x2c)   4096    528     10
- *   AT45DB0321B 32Mbit  (4M)    xx1101xx (0x34)   8192    528     10
- *   AT45DB0642  64Mbit  (8M)    xx111xxx (0x3c)   8192   1056     11
- *   AT45DB1282  128Mbit (16M)   xx0100xx (0x10)  16384   1056     11
- */
-
 struct flash_info {
         char            *name;
 
-        /* JEDEC id zero means "no ID" (most older chips); otherwise it has
-         * a high byte of zero plus three data bytes: the manufacturer id,
-         * then a two byte device id.
+        /* JEDEC id has a high byte of zero plus three data bytes:
+         * the manufacturer id, then a two byte device id.
          */
         uint32_t        jedec_id;
 
-        /* The size listed here is what works with OPCODE_SE, which isn't
-         * necessarily called a "sector" by the vendor.
-         */
+        /* The size listed here is what works with OP_ERASE_PAGE. */
         unsigned        nr_pages;
         uint16_t        pagesize;
         uint16_t        pageoffset;
 
         uint16_t        flags;
-#define SUP_POW2PS      0x02
-#define IS_POW2PS       0x01
+#define SUP_POW2PS      0x0002          /* supports 2^N byte pages */
+#define IS_POW2PS       0x0001          /* uses 2^N byte pages */
 };
 
 static struct flash_info __devinitdata dataflash_data [] = {
 
-        { "at45db011d",  0x1f2200, 512, 264, 9, SUP_POW2PS},
+        /*
+         * NOTE:  chips with SUP_POW2PS (rev D and up) need two entries,
+         * one with IS_POW2PS and the other without.  The entry with the
+         * non-2^N byte page size can't name exact chip revisions without
+         * losing backwards compatibility for cmdlinepart.
+         *
+         * These newer chips also support 128-byte security registers (with
+         * 64 bytes one-time-programmable) and software write-protection.
+         */
+        { "AT45DB011B",  0x1f2200, 512, 264, 9, SUP_POW2PS},
         { "at45db011d",  0x1f2200, 512, 256, 8, SUP_POW2PS | IS_POW2PS},
 
-        { "at45db021d",  0x1f2300, 1024, 264, 9, SUP_POW2PS},
+        { "AT45DB021B",  0x1f2300, 1024, 264, 9, SUP_POW2PS},
         { "at45db021d",  0x1f2300, 1024, 256, 8, SUP_POW2PS | IS_POW2PS},
 
-        { "at45db041d",  0x1f2400, 2048, 264, 9, SUP_POW2PS},
+        { "AT45DB041x",  0x1f2400, 2048, 264, 9, SUP_POW2PS},
         { "at45db041d",  0x1f2400, 2048, 256, 8, SUP_POW2PS | IS_POW2PS},
 
-        { "at45db081d",  0x1f2500, 4096, 264, 9, SUP_POW2PS},
+        { "AT45DB081B",  0x1f2500, 4096, 264, 9, SUP_POW2PS},
         { "at45db081d",  0x1f2500, 4096, 256, 8, SUP_POW2PS | IS_POW2PS},
 
-        { "at45db161d",  0x1f2600, 4096, 528, 10, SUP_POW2PS},
+        { "AT45DB161x",  0x1f2600, 4096, 528, 10, SUP_POW2PS},
         { "at45db161d",  0x1f2600, 4096, 512, 9, SUP_POW2PS | IS_POW2PS},
 
-        { "at45db321c",  0x1f2700, 8192, 528, 10, },
+        { "AT45DB321x",  0x1f2700, 8192, 528, 10, 0},           /* rev C */
 
-        { "at45db321d",  0x1f2701, 8192, 528, 10, SUP_POW2PS},
+        { "AT45DB321x",  0x1f2701, 8192, 528, 10, SUP_POW2PS},
         { "at45db321d",  0x1f2701, 8192, 512, 9, SUP_POW2PS | IS_POW2PS},
 
-        { "at45db641d",  0x1f2800, 8192, 1056, 11, SUP_POW2PS},
-        { "at45db641d",  0x1f2800, 8192, 1024, 10, SUP_POW2PS | IS_POW2PS},
+        { "AT45DB642x",  0x1f2800, 8192, 1056, 11, SUP_POW2PS},
+        { "at45db642d",  0x1f2800, 8192, 1024, 10, SUP_POW2PS | IS_POW2PS},
 };
 
 static struct flash_info *__devinit jedec_probe(struct spi_device *spi)
@@ -588,17 +581,23 @@ static struct flash_info *__devinit jedec_probe(struct spi_device *spi)
         struct flash_info       *info;
         int status;
 
-
         /* JEDEC also defines an optional "extended device information"
          * string for after vendor-specific data, after the three bytes
          * we use here.  Supporting some chips might require using it.
+         *
+         * If the vendor ID isn't Atmel's (0x1f), assume this call failed.
+         * That's not an error; only rev C and newer chips handle it, and
+         * only Atmel sells these chips.
          */
         tmp = spi_write_then_read(spi, &code, 1, id, 3);
         if (tmp < 0) {
                 DEBUG(MTD_DEBUG_LEVEL0, "%s: error %d reading JEDEC ID\n",
                         spi->dev.bus_id, tmp);
-                return NULL;
+                return ERR_PTR(tmp);
         }
+        if (id[0] != 0x1f)
+                return NULL;
+
         jedec = id[0];
         jedec = jedec << 8;
         jedec |= id[1];
@@ -609,19 +608,53 @@ static struct flash_info *__devinit jedec_probe(struct spi_device *spi)
                         tmp < ARRAY_SIZE(dataflash_data);
                         tmp++, info++) {
                 if (info->jedec_id == jedec) {
+                        DEBUG(MTD_DEBUG_LEVEL1, "%s: OTP, sector protect%s\n",
+                                dev_name(&spi->dev),
+                                (info->flags & SUP_POW2PS)
+                                        ? ", binary pagesize" : ""
+                                );
                         if (info->flags & SUP_POW2PS) {
                                 status = dataflash_status(spi);
-                                if (status & 0x1)
-                                        /* return power of 2 pagesize */
-                                        return ++info;
-                                else
-                                        return info;
+                                if (status < 0) {
+                                        DEBUG(MTD_DEBUG_LEVEL1,
+                                                "%s: status error %d\n",
+                                                dev_name(&spi->dev), status);
+                                        return ERR_PTR(status);
+                                }
+                                if (status & 0x1) {
+                                        if (info->flags & IS_POW2PS)
+                                                return info;
+                                } else {
+                                        if (!(info->flags & IS_POW2PS))
+                                                return info;
+                                }
                         }
                 }
         }
-        return NULL;
+
+        /*
+         * Treat other chips as errors ... we won't know the right page
+         * size (it might be binary) even when we can tell which density
+         * class is involved (legacy chip id scheme).
+         */
+        dev_warn(&spi->dev, "JEDEC id %06x not handled\n", jedec);
+        return ERR_PTR(-ENODEV);
 }
 
+/*
+ * Detect and initialize DataFlash device, using JEDEC IDs on newer chips
+ * or else the ID code embedded in the status bits:
+ *
+ *   Device      Density         ID code          #Pages PageSize  Offset
+ *   AT45DB011B  1Mbit   (128K)  xx0011xx (0x0c)    512    264      9
+ *   AT45DB021B  2Mbit   (256K)  xx0101xx (0x14)   1024    264      9
+ *   AT45DB041B  4Mbit   (512K)  xx0111xx (0x1c)   2048    264      9
+ *   AT45DB081B  8Mbit   (1M)    xx1001xx (0x24)   4096    264      9
+ *   AT45DB0161B 16Mbit  (2M)    xx1011xx (0x2c)   4096    528     10
+ *   AT45DB0321B 32Mbit  (4M)    xx1101xx (0x34)   8192    528     10
+ *   AT45DB0642  64Mbit  (8M)    xx111xxx (0x3c)   8192   1056     11
+ *   AT45DB1282  128Mbit (16M)   xx0100xx (0x10)  16384   1056     11
+ */
 static int __devinit dataflash_probe(struct spi_device *spi)
 {
         int status;
@@ -632,14 +665,17 @@ static int __devinit dataflash_probe(struct spi_device *spi)
          * If it succeeds we know we have either a C or D part.
          * D will support power of 2 pagesize option.
          */
-
         info = jedec_probe(spi);
-
+        if (IS_ERR(info))
+                return PTR_ERR(info);
         if (info != NULL)
                 return add_dataflash(spi, info->name, info->nr_pages,
                                  info->pagesize, info->pageoffset);
 
-
+        /*
+         * Older chips support only legacy commands, identifing
+         * capacity using bits in the status byte.
+         */
         status = dataflash_status(spi);
         if (status <= 0 || status == 0xff) {
                 DEBUG(MTD_DEBUG_LEVEL1, "%s: status error %d\n",
@@ -661,13 +697,13 @@ static int __devinit dataflash_probe(struct spi_device *spi)
                 status = add_dataflash(spi, "AT45DB021B", 1024, 264, 9);
                 break;
         case 0x1c:      /* 0 1 1 1 x x */
-                status = add_dataflash(spi, "AT45DB041B", 2048, 264, 9);
+                status = add_dataflash(spi, "AT45DB041x", 2048, 264, 9);
                 break;
         case 0x24:      /* 1 0 0 1 x x */
                 status = add_dataflash(spi, "AT45DB081B", 4096, 264, 9);
                 break;
         case 0x2c:      /* 1 0 1 1 x x */
-                status = add_dataflash(spi, "AT45DB161B", 4096, 528, 10);
+                status = add_dataflash(spi, "AT45DB161x", 4096, 528, 10);
                 break;
         case 0x34:      /* 1 1 0 1 x x */
                 status = add_dataflash(spi, "AT45DB321x", 8192, 528, 10);
diff --git a/drivers/mtd/mtdsuper.c b/drivers/mtd/mtdsuper.c
index 28cc6787a800..9b6af7e74a65 100644
--- a/drivers/mtd/mtdsuper.c
+++ b/drivers/mtd/mtdsuper.c
@@ -125,7 +125,7 @@ int get_sb_mtd(struct file_system_type *fs_type, int flags,
                int (*fill_super)(struct super_block *, void *, int),
                struct vfsmount *mnt)
 {
-        struct nameidata nd;
+        struct block_device *bdev;
         int mtdnr, ret;
 
         if (!dev_name)
@@ -181,29 +181,20 @@ int get_sb_mtd(struct file_system_type *fs_type, int flags,
         /* try the old way - the hack where we allowed users to mount
          * /dev/mtdblock$(n) but didn't actually _use_ the blockdev
          */
-        ret = path_lookup(dev_name, LOOKUP_FOLLOW, &nd);
-
-        DEBUG(1, "MTDSB: path_lookup() returned %d, inode %p\n",
-              ret, nd.path.dentry ? nd.path.dentry->d_inode : NULL);
-
-        if (ret)
+        bdev = lookup_bdev(dev_name);
+        if (IS_ERR(bdev)) {
+                ret = PTR_ERR(bdev);
+                DEBUG(1, "MTDSB: lookup_bdev() returned %d\n", ret);
                 return ret;
-
-        ret = -EINVAL;
-
-        if (!S_ISBLK(nd.path.dentry->d_inode->i_mode))
-                goto out;
-
-        if (nd.path.mnt->mnt_flags & MNT_NODEV) {
-                ret = -EACCES;
-                goto out;
         }
+        DEBUG(1, "MTDSB: lookup_bdev() returned 0\n");
 
-        if (imajor(nd.path.dentry->d_inode) != MTD_BLOCK_MAJOR)
+        ret = -EINVAL;
+        if (MAJOR(bdev->bd_dev) != MTD_BLOCK_MAJOR)
                 goto not_an_MTD_device;
 
-        mtdnr = iminor(nd.path.dentry->d_inode);
-        path_put(&nd.path);
+        mtdnr = MINOR(bdev->bd_dev);
+        bdput(bdev);
 
         return get_sb_mtd_nr(fs_type, flags, dev_name, data, mtdnr, fill_super,
                              mnt);
@@ -213,10 +204,8 @@ not_an_MTD_device:
                 printk(KERN_NOTICE
                        "MTD: Attempt to mount non-MTD device \"%s\"\n",
                        dev_name);
-out:
-        path_put(&nd.path);
+        bdput(bdev);
         return ret;
-
 }
 
 EXPORT_SYMBOL_GPL(get_sb_mtd);
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 71406e517857..02f9cc30d77b 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -104,11 +104,24 @@ config MTD_NAND_BF5XX
 
 config MTD_NAND_BF5XX_HWECC
         bool "BF5XX NAND Hardware ECC"
+        default y
         depends on MTD_NAND_BF5XX
         help
           Enable the use of the BF5XX's internal ECC generator when
           using NAND.
 
+config MTD_NAND_BF5XX_BOOTROM_ECC
+        bool "Use Blackfin BootROM ECC Layout"
+        default n
+        depends on MTD_NAND_BF5XX_HWECC
+        help
+          If you wish to modify NAND pages and allow the Blackfin on-chip
+          BootROM to boot from them, say Y here.  This is only necessary
+          if you are booting U-Boot out of NAND and you wish to update
+          U-Boot from Linux' userspace.  Otherwise, you should say N here.
+
+          If unsure, say N.
+
 config MTD_NAND_RTC_FROM4
         tristate "Renesas Flash ROM 4-slot interface board (FROM_BOARD4)"
         depends on SH_SOLUTION_ENGINE
diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c
index e87a57297328..9af2a2cc1153 100644
--- a/drivers/mtd/nand/bf5xx_nand.c
+++ b/drivers/mtd/nand/bf5xx_nand.c
@@ -91,6 +91,41 @@ static const unsigned short bfin_nfc_pin_req[] =
          P_NAND_ALE,
          0};
 
+#ifdef CONFIG_MTD_NAND_BF5XX_BOOTROM_ECC
+static uint8_t bbt_pattern[] = { 0xff };
+
+static struct nand_bbt_descr bootrom_bbt = {
+        .options = 0,
+        .offs = 63,
+        .len = 1,
+        .pattern = bbt_pattern,
+};
+
+static struct nand_ecclayout bootrom_ecclayout = {
+        .eccbytes = 24,
+        .eccpos = {
+                0x8 * 0, 0x8 * 0 + 1, 0x8 * 0 + 2,
+                0x8 * 1, 0x8 * 1 + 1, 0x8 * 1 + 2,
+                0x8 * 2, 0x8 * 2 + 1, 0x8 * 2 + 2,
+                0x8 * 3, 0x8 * 3 + 1, 0x8 * 3 + 2,
+                0x8 * 4, 0x8 * 4 + 1, 0x8 * 4 + 2,
+                0x8 * 5, 0x8 * 5 + 1, 0x8 * 5 + 2,
+                0x8 * 6, 0x8 * 6 + 1, 0x8 * 6 + 2,
+                0x8 * 7, 0x8 * 7 + 1, 0x8 * 7 + 2
+        },
+        .oobfree = {
+                { 0x8 * 0 + 3, 5 },
+                { 0x8 * 1 + 3, 5 },
+                { 0x8 * 2 + 3, 5 },
+                { 0x8 * 3 + 3, 5 },
+                { 0x8 * 4 + 3, 5 },
+                { 0x8 * 5 + 3, 5 },
+                { 0x8 * 6 + 3, 5 },
+                { 0x8 * 7 + 3, 5 },
+        }
+};
+#endif
+
 /*
  * Data structures for bf5xx nand flash controller driver
  */
@@ -273,7 +308,7 @@ static int bf5xx_nand_correct_data(struct mtd_info *mtd, u_char *dat,
                 dat += 256;
                 read_ecc += 8;
                 calc_ecc += 8;
-                ret = bf5xx_nand_correct_data_256(mtd, dat, read_ecc, calc_ecc);
+                ret |= bf5xx_nand_correct_data_256(mtd, dat, read_ecc, calc_ecc);
         }
 
         return ret;
@@ -298,7 +333,7 @@ static int bf5xx_nand_calculate_ecc(struct mtd_info *mtd,
         ecc0 = bfin_read_NFC_ECC0();
         ecc1 = bfin_read_NFC_ECC1();
 
-        code[0] = (ecc0 & 0x3FF) | ((ecc1 & 0x3FF) << 11);
+        code[0] = (ecc0 & 0x7ff) | ((ecc1 & 0x7ff) << 11);
 
         dev_dbg(info->device, "returning ecc 0x%08x\n", code[0]);
 
@@ -310,7 +345,7 @@ static int bf5xx_nand_calculate_ecc(struct mtd_info *mtd,
         if (page_size == 512) {
                 ecc0 = bfin_read_NFC_ECC2();
                 ecc1 = bfin_read_NFC_ECC3();
-                code[1] = (ecc0 & 0x3FF) | ((ecc1 & 0x3FF) << 11);
+                code[1] = (ecc0 & 0x7ff) | ((ecc1 & 0x7ff) << 11);
 
                 /* second 3 bytes in ecc_code for second 256
                  * bytes of 512 page size
@@ -514,7 +549,6 @@ static void bf5xx_nand_dma_write_buf(struct mtd_info *mtd,
 /*
  * System initialization functions
  */
-
 static int bf5xx_nand_dma_init(struct bf5xx_nand_info *info)
 {
         int ret;
@@ -547,6 +581,13 @@ static int bf5xx_nand_dma_init(struct bf5xx_nand_info *info)
         return 0;
 }
 
+static void bf5xx_nand_dma_remove(struct bf5xx_nand_info *info)
+{
+        /* Free NFC DMA channel */
+        if (hardware_ecc)
+                free_dma(CH_NFC);
+}
+
 /*
  * BF5XX NFC hardware initialization
  *  - pin mux setup
@@ -605,7 +646,7 @@ static int bf5xx_nand_add_partition(struct bf5xx_nand_info *info)
 #endif
 }
 
-static int bf5xx_nand_remove(struct platform_device *pdev)
+static int __devexit bf5xx_nand_remove(struct platform_device *pdev)
 {
         struct bf5xx_nand_info *info = to_nand_info(pdev);
         struct mtd_info *mtd = NULL;
@@ -623,6 +664,7 @@ static int bf5xx_nand_remove(struct platform_device *pdev)
         }
 
         peripheral_free_list(bfin_nfc_pin_req);
+        bf5xx_nand_dma_remove(info);
 
         /* free the common resources */
         kfree(info);
@@ -638,7 +680,7 @@ static int bf5xx_nand_remove(struct platform_device *pdev)
  * it can allocate all necessary resources then calls the
  * nand layer to look for devices
  */
-static int bf5xx_nand_probe(struct platform_device *pdev)
+static int __devinit bf5xx_nand_probe(struct platform_device *pdev)
 {
         struct bf5xx_nand_platform *plat = to_nand_plat(pdev);
         struct bf5xx_nand_info *info = NULL;
@@ -648,22 +690,21 @@ static int bf5xx_nand_probe(struct platform_device *pdev)
 
         dev_dbg(&pdev->dev, "(%p)\n", pdev);
 
-        if (peripheral_request_list(bfin_nfc_pin_req, DRV_NAME)) {
-                printk(KERN_ERR DRV_NAME
-                ": Requesting Peripherals failed\n");
-                return -EFAULT;
-        }
-
         if (!plat) {
                 dev_err(&pdev->dev, "no platform specific information\n");
-                goto exit_error;
+                return -EINVAL;
+        }
+
+        if (peripheral_request_list(bfin_nfc_pin_req, DRV_NAME)) {
+                dev_err(&pdev->dev, "requesting Peripherals failed\n");
+                return -EFAULT;
         }
 
         info = kzalloc(sizeof(*info), GFP_KERNEL);
         if (info == NULL) {
                 dev_err(&pdev->dev, "no memory for flash info\n");
                 err = -ENOMEM;
-                goto exit_error;
+                goto out_err_kzalloc;
         }
 
         platform_set_drvdata(pdev, info);
@@ -707,11 +748,16 @@ static int bf5xx_nand_probe(struct platform_device *pdev)
 
         /* initialise the hardware */
         err = bf5xx_nand_hw_init(info);
-        if (err != 0)
-                goto exit_error;
+        if (err)
+                goto out_err_hw_init;
 
         /* setup hardware ECC data struct */
         if (hardware_ecc) {
+#ifdef CONFIG_MTD_NAND_BF5XX_BOOTROM_ECC
+                chip->badblock_pattern = &bootrom_bbt;
+                chip->ecc.layout = &bootrom_ecclayout;
+#endif
+
                 if (plat->page_size == NFC_PG_SIZE_256) {
                         chip->ecc.bytes = 3;
                         chip->ecc.size = 256;
@@ -733,7 +779,7 @@ static int bf5xx_nand_probe(struct platform_device *pdev)
         /* scan hardware nand chip and setup mtd info data struct */
         if (nand_scan(mtd, 1)) {
                 err = -ENXIO;
-                goto exit_error;
+                goto out_err_nand_scan;
         }
 
         /* add NAND partition */
@@ -742,11 +788,14 @@ static int bf5xx_nand_probe(struct platform_device *pdev)
         dev_dbg(&pdev->dev, "initialised ok\n");
         return 0;
 
-exit_error:
-        bf5xx_nand_remove(pdev);
+out_err_nand_scan:
+        bf5xx_nand_dma_remove(info);
+out_err_hw_init:
+        platform_set_drvdata(pdev, NULL);
+        kfree(info);
+out_err_kzalloc:
+        peripheral_free_list(bfin_nfc_pin_req);
 
-        if (err == 0)
-                err = -EINVAL;
         return err;
 }
 
@@ -775,7 +824,7 @@ static int bf5xx_nand_resume(struct platform_device *dev)
 /* driver device registration */
 static struct platform_driver bf5xx_nand_driver = {
         .probe          = bf5xx_nand_probe,
-        .remove         = bf5xx_nand_remove,
+        .remove         = __devexit_p(bf5xx_nand_remove),
         .suspend        = bf5xx_nand_suspend,
         .resume         = bf5xx_nand_resume,
         .driver         = {
diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c
index 765d4f0f7c86..e4226e02d63e 100644
--- a/drivers/mtd/nand/diskonchip.c
+++ b/drivers/mtd/nand/diskonchip.c
@@ -1125,9 +1125,9 @@ static inline int __init nftl_partscan(struct mtd_info *mtd, struct mtd_partitio
                 goto out;
         mh = (struct NFTLMediaHeader *)buf;
 
-        mh->NumEraseUnits = le16_to_cpu(mh->NumEraseUnits);
-        mh->FirstPhysicalEUN = le16_to_cpu(mh->FirstPhysicalEUN);
-        mh->FormattedSize = le32_to_cpu(mh->FormattedSize);
+        le16_to_cpus(&mh->NumEraseUnits);
+        le16_to_cpus(&mh->FirstPhysicalEUN);
+        le32_to_cpus(&mh->FormattedSize);
 
         printk(KERN_INFO "    DataOrgID        = %s\n"
                          "    NumEraseUnits    = %d\n"
@@ -1235,12 +1235,12 @@ static inline int __init inftl_partscan(struct mtd_info *mtd, struct mtd_partiti
         doc->mh1_page = doc->mh0_page + (4096 >> this->page_shift);
         mh = (struct INFTLMediaHeader *)buf;
 
-        mh->NoOfBootImageBlocks = le32_to_cpu(mh->NoOfBootImageBlocks);
-        mh->NoOfBinaryPartitions = le32_to_cpu(mh->NoOfBinaryPartitions);
-        mh->NoOfBDTLPartitions = le32_to_cpu(mh->NoOfBDTLPartitions);
-        mh->BlockMultiplierBits = le32_to_cpu(mh->BlockMultiplierBits);
-        mh->FormatFlags = le32_to_cpu(mh->FormatFlags);
-        mh->PercentUsed = le32_to_cpu(mh->PercentUsed);
+        le32_to_cpus(&mh->NoOfBootImageBlocks);
+        le32_to_cpus(&mh->NoOfBinaryPartitions);
+        le32_to_cpus(&mh->NoOfBDTLPartitions);
+        le32_to_cpus(&mh->BlockMultiplierBits);
+        le32_to_cpus(&mh->FormatFlags);
+        le32_to_cpus(&mh->PercentUsed);
 
         printk(KERN_INFO "    bootRecordID          = %s\n"
                          "    NoOfBootImageBlocks   = %d\n"
@@ -1277,12 +1277,12 @@ static inline int __init inftl_partscan(struct mtd_info *mtd, struct mtd_partiti
         /* Scan the partitions */
         for (i = 0; (i < 4); i++) {
                 ip = &(mh->Partitions[i]);
-                ip->virtualUnits = le32_to_cpu(ip->virtualUnits);
-                ip->firstUnit = le32_to_cpu(ip->firstUnit);
-                ip->lastUnit = le32_to_cpu(ip->lastUnit);
-                ip->flags = le32_to_cpu(ip->flags);
-                ip->spareUnits = le32_to_cpu(ip->spareUnits);
-                ip->Reserved0 = le32_to_cpu(ip->Reserved0);
+                le32_to_cpus(&ip->virtualUnits);
+                le32_to_cpus(&ip->firstUnit);
+                le32_to_cpus(&ip->lastUnit);
+                le32_to_cpus(&ip->flags);
+                le32_to_cpus(&ip->spareUnits);
+                le32_to_cpus(&ip->Reserved0);
 
                 printk(KERN_INFO        "    PARTITION[%d] ->\n"
                         "        virtualUnits    = %d\n"
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index 9dff51351f4f..98ad3cefcaf4 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -887,7 +887,7 @@ static int __devinit fsl_elbc_chip_probe(struct fsl_elbc_ctrl *ctrl,
                 goto err;
         }
 
-        priv->mtd.name = kasprintf(GFP_KERNEL, "%x.flash", res.start);
+        priv->mtd.name = kasprintf(GFP_KERNEL, "%x.flash", (unsigned)res.start);
         if (!priv->mtd.name) {
                 ret = -ENOMEM;
                 goto err;
diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
index ecd70e2504f6..556e8131ecdc 100644
--- a/drivers/mtd/nand/nandsim.c
+++ b/drivers/mtd/nand/nandsim.c
@@ -28,6 +28,7 @@
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/vmalloc.h>
+#include <asm/div64.h>
 #include <linux/slab.h>
 #include <linux/errno.h>
 #include <linux/string.h>
@@ -207,13 +208,16 @@ MODULE_PARM_DESC(overridesize,   "Specifies the NAND Flash size overriding the I
 #define STATE_CMD_READID       0x0000000A /* read ID */
 #define STATE_CMD_ERASE2       0x0000000B /* sector erase second command */
 #define STATE_CMD_RESET        0x0000000C /* reset */
+#define STATE_CMD_RNDOUT       0x0000000D /* random output command */
+#define STATE_CMD_RNDOUTSTART  0x0000000E /* random output start command */
 #define STATE_CMD_MASK         0x0000000F /* command states mask */
 
 /* After an address is input, the simulator goes to one of these states */
 #define STATE_ADDR_PAGE        0x00000010 /* full (row, column) address is accepted */
 #define STATE_ADDR_SEC         0x00000020 /* sector address was accepted */
-#define STATE_ADDR_ZERO        0x00000030 /* one byte zero address was accepted */
-#define STATE_ADDR_MASK        0x00000030 /* address states mask */
+#define STATE_ADDR_COLUMN      0x00000030 /* column address was accepted */
+#define STATE_ADDR_ZERO        0x00000040 /* one byte zero address was accepted */
+#define STATE_ADDR_MASK        0x00000070 /* address states mask */
 
 /* Durind data input/output the simulator is in these states */
 #define STATE_DATAIN           0x00000100 /* waiting for data input */
@@ -240,7 +244,7 @@ MODULE_PARM_DESC(overridesize,   "Specifies the NAND Flash size overriding the I
 #define ACTION_OOBOFF    0x00600000 /* add to address OOB offset */
 #define ACTION_MASK      0x00700000 /* action mask */
 
-#define NS_OPER_NUM      12 /* Number of operations supported by the simulator */
+#define NS_OPER_NUM      13 /* Number of operations supported by the simulator */
 #define NS_OPER_STATES   6  /* Maximum number of states in operation */
 
 #define OPT_ANY          0xFFFFFFFF /* any chip supports this operation */
@@ -373,7 +377,10 @@ static struct nandsim_operations {
         {OPT_ANY, {STATE_CMD_READID, STATE_ADDR_ZERO, STATE_DATAOUT_ID, STATE_READY}},
         /* Large page devices read page */
         {OPT_LARGEPAGE, {STATE_CMD_READ0, STATE_ADDR_PAGE, STATE_CMD_READSTART | ACTION_CPY,
-                               STATE_DATAOUT, STATE_READY}}
+                               STATE_DATAOUT, STATE_READY}},
+        /* Large page devices random page read */
+        {OPT_LARGEPAGE, {STATE_CMD_RNDOUT, STATE_ADDR_COLUMN, STATE_CMD_RNDOUTSTART | ACTION_CPY,
+                               STATE_DATAOUT, STATE_READY}},
 };
 
 struct weak_block {
@@ -579,7 +586,8 @@ static int init_nandsim(struct mtd_info *mtd)
         if (ns->busw == 16)
                 NS_WARN("16-bit flashes support wasn't tested\n");
 
-        printk("flash size: %llu MiB\n",        ns->geom.totsz >> 20);
+        printk("flash size: %llu MiB\n",
+                        (unsigned long long)ns->geom.totsz >> 20);
         printk("page size: %u bytes\n",         ns->geom.pgsz);
         printk("OOB area size: %u bytes\n",     ns->geom.oobsz);
         printk("sector size: %u KiB\n",         ns->geom.secsz >> 10);
@@ -588,8 +596,9 @@ static int init_nandsim(struct mtd_info *mtd)
         printk("bus width: %u\n",               ns->busw);
         printk("bits in sector size: %u\n",     ns->geom.secshift);
         printk("bits in page size: %u\n",       ns->geom.pgshift);
-        printk("bits in OOB size: %u\n",        ns->geom.oobshift);
-        printk("flash size with OOB: %llu KiB\n", ns->geom.totszoob >> 10);
+        printk("bits in OOB size: %u\n",        ns->geom.oobshift);
+        printk("flash size with OOB: %llu KiB\n",
+                        (unsigned long long)ns->geom.totszoob >> 10);
         printk("page address bytes: %u\n",      ns->geom.pgaddrbytes);
         printk("sector address bytes: %u\n",    ns->geom.secaddrbytes);
         printk("options: %#x\n",                ns->options);
@@ -937,12 +946,18 @@ static char *get_state_name(uint32_t state)
                         return "STATE_CMD_ERASE2";
                 case STATE_CMD_RESET:
                         return "STATE_CMD_RESET";
+                case STATE_CMD_RNDOUT:
+                        return "STATE_CMD_RNDOUT";
+                case STATE_CMD_RNDOUTSTART:
+                        return "STATE_CMD_RNDOUTSTART";
                 case STATE_ADDR_PAGE:
                         return "STATE_ADDR_PAGE";
                 case STATE_ADDR_SEC:
                         return "STATE_ADDR_SEC";
                 case STATE_ADDR_ZERO:
                         return "STATE_ADDR_ZERO";
+                case STATE_ADDR_COLUMN:
+                        return "STATE_ADDR_COLUMN";
                 case STATE_DATAIN:
                         return "STATE_DATAIN";
                 case STATE_DATAOUT:
@@ -973,6 +988,7 @@ static int check_command(int cmd)
         switch (cmd) {
 
         case NAND_CMD_READ0:
+        case NAND_CMD_READ1:
         case NAND_CMD_READSTART:
         case NAND_CMD_PAGEPROG:
         case NAND_CMD_READOOB:
@@ -982,7 +998,8 @@ static int check_command(int cmd)
         case NAND_CMD_READID:
         case NAND_CMD_ERASE2:
         case NAND_CMD_RESET:
-        case NAND_CMD_READ1:
+        case NAND_CMD_RNDOUT:
+        case NAND_CMD_RNDOUTSTART:
                 return 0;
 
         case NAND_CMD_STATUS_MULTI:
@@ -1021,6 +1038,10 @@ static uint32_t get_state_by_command(unsigned command)
                         return STATE_CMD_ERASE2;
                 case NAND_CMD_RESET:
                         return STATE_CMD_RESET;
+                case NAND_CMD_RNDOUT:
+                        return STATE_CMD_RNDOUT;
+                case NAND_CMD_RNDOUTSTART:
+                        return STATE_CMD_RNDOUTSTART;
         }
 
         NS_ERR("get_state_by_command: unknown command, BUG\n");
@@ -1582,6 +1603,11 @@ static void switch_state(struct nandsim *ns)
                                 ns->regs.num = 1;
                                 break;
 
+                        case STATE_ADDR_COLUMN:
+                                /* Column address is always 2 bytes */
+                                ns->regs.num = ns->geom.pgaddrbytes - ns->geom.secaddrbytes;
+                                break;
+
                         default:
                                 NS_ERR("switch_state: BUG! unknown address state\n");
                 }
@@ -1693,15 +1719,21 @@ static void ns_nand_write_byte(struct mtd_info *mtd, u_char byte)
                         return;
                 }
 
-                /*
-                 * Chip might still be in STATE_DATAOUT
-                 * (if OPT_AUTOINCR feature is supported), STATE_DATAOUT_STATUS or
-                 * STATE_DATAOUT_STATUS_M state. If so, switch state.
-                 */
+                /* Check that the command byte is correct */
+                if (check_command(byte)) {
+                        NS_ERR("write_byte: unknown command %#x\n", (uint)byte);
+                        return;
+                }
+
                 if (NS_STATE(ns->state) == STATE_DATAOUT_STATUS
                         || NS_STATE(ns->state) == STATE_DATAOUT_STATUS_M
-                        || ((ns->options & OPT_AUTOINCR) && NS_STATE(ns->state) == STATE_DATAOUT))
+                        || NS_STATE(ns->state) == STATE_DATAOUT) {
+                        int row = ns->regs.row;
+
                         switch_state(ns);
+                        if (byte == NAND_CMD_RNDOUT)
+                                ns->regs.row = row;
+                }
 
                 /* Check if chip is expecting command */
                 if (NS_STATE(ns->nxstate) != STATE_UNKNOWN && !(ns->nxstate & STATE_CMD_MASK)) {
@@ -1715,12 +1747,6 @@ static void ns_nand_write_byte(struct mtd_info *mtd, u_char byte)
                         switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
                 }
 
-                /* Check that the command byte is correct */
-                if (check_command(byte)) {
-                        NS_ERR("write_byte: unknown command %#x\n", (uint)byte);
-                        return;
-                }
-
                 NS_DBG("command byte corresponding to %s state accepted\n",
                         get_state_name(get_state_by_command(byte)));
                 ns->regs.command = byte;
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index fa533c27052a..8a03875ec877 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -510,14 +510,14 @@ config STNIC
 config SH_ETH
         tristate "Renesas SuperH Ethernet support"
         depends on SUPERH && \
-                (CPU_SUBTYPE_SH7710 || CPU_SUBTYPE_SH7712)
+                (CPU_SUBTYPE_SH7710 || CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7763)
         select CRC32
         select MII
         select MDIO_BITBANG
         select PHYLIB
         help
           Renesas SuperH Ethernet device driver.
-          This driver support SH7710 and SH7712.
+          This driver support SH7710, SH7712 and SH7763.
 
 config SUNLANCE
         tristate "Sun LANCE support"
diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c
index a8ec60e1ed75..3db7db1828e7 100644
--- a/drivers/net/bfin_mac.c
+++ b/drivers/net/bfin_mac.c
@@ -605,36 +605,87 @@ adjust_head:
 static int bfin_mac_hard_start_xmit(struct sk_buff *skb,
                                 struct net_device *dev)
 {
-        unsigned int data;
+        u16 *data;
 
         current_tx_ptr->skb = skb;
 
-        /*
-         * Is skb->data always 16-bit aligned?
-         * Do we need to memcpy((char *)(tail->packet + 2), skb->data, len)?
-         */
-        if ((((unsigned int)(skb->data)) & 0x02) == 2) {
-                /* move skb->data to current_tx_ptr payload */
-                data = (unsigned int)(skb->data) - 2;
-                *((unsigned short *)data) = (unsigned short)(skb->len);
-                current_tx_ptr->desc_a.start_addr = (unsigned long)data;
-                /* this is important! */
-                blackfin_dcache_flush_range(data, (data + (skb->len)) + 2);
-
+        if (ANOMALY_05000285) {
+                /*
+                 * TXDWA feature is not avaible to older revision < 0.3 silicon
+                 * of BF537
+                 *
+                 * Only if data buffer is ODD WORD alignment, we do not
+                 * need to memcpy
+                 */
+                u32 data_align = (u32)(skb->data) & 0x3;
+                if (data_align == 0x2) {
+                        /* move skb->data to current_tx_ptr payload */
+                        data = (u16 *)(skb->data) - 1;
+                        *data = (u16)(skb->len);
+                        current_tx_ptr->desc_a.start_addr = (u32)data;
+                        /* this is important! */
+                        blackfin_dcache_flush_range((u32)data,
+                                        (u32)((u8 *)data + skb->len + 4));
+                } else {
+                        *((u16 *)(current_tx_ptr->packet)) = (u16)(skb->len);
+                        memcpy((u8 *)(current_tx_ptr->packet + 2), skb->data,
+                                skb->len);
+                        current_tx_ptr->desc_a.start_addr =
+                                (u32)current_tx_ptr->packet;
+                        if (current_tx_ptr->status.status_word != 0)
+                                current_tx_ptr->status.status_word = 0;
+                        blackfin_dcache_flush_range(
+                                (u32)current_tx_ptr->packet,
+                                (u32)(current_tx_ptr->packet + skb->len + 2));
+                }
         } else {
-                *((unsigned short *)(current_tx_ptr->packet)) =
-                    (unsigned short)(skb->len);
-                memcpy((char *)(current_tx_ptr->packet + 2), skb->data,
-                       (skb->len));
-                current_tx_ptr->desc_a.start_addr =
-                    (unsigned long)current_tx_ptr->packet;
-                if (current_tx_ptr->status.status_word != 0)
-                        current_tx_ptr->status.status_word = 0;
-                blackfin_dcache_flush_range((unsigned int)current_tx_ptr->
-                                            packet,
-                                            (unsigned int)(current_tx_ptr->
-                                                           packet + skb->len) +
-                                            2);
+                /*
+                 * TXDWA feature is avaible to revision < 0.3 silicon of
+                 * BF537 and always avaible to BF52x
+                 */
+                u32 data_align = (u32)(skb->data) & 0x3;
+                if (data_align == 0x0) {
+                        u16 sysctl = bfin_read_EMAC_SYSCTL();
+                        sysctl |= TXDWA;
+                        bfin_write_EMAC_SYSCTL(sysctl);
+
+                        /* move skb->data to current_tx_ptr payload */
+                        data = (u16 *)(skb->data) - 2;
+                        *data = (u16)(skb->len);
+                        current_tx_ptr->desc_a.start_addr = (u32)data;
+                        /* this is important! */
+                        blackfin_dcache_flush_range(
+                                        (u32)data,
+                                        (u32)((u8 *)data + skb->len + 4));
+                } else if (data_align == 0x2) {
+                        u16 sysctl = bfin_read_EMAC_SYSCTL();
+                        sysctl &= ~TXDWA;
+                        bfin_write_EMAC_SYSCTL(sysctl);
+
+                        /* move skb->data to current_tx_ptr payload */
+                        data = (u16 *)(skb->data) - 1;
+                        *data = (u16)(skb->len);
+                        current_tx_ptr->desc_a.start_addr = (u32)data;
+                        /* this is important! */
+                        blackfin_dcache_flush_range(
+                                        (u32)data,
+                                        (u32)((u8 *)data + skb->len + 4));
+                } else {
+                        u16 sysctl = bfin_read_EMAC_SYSCTL();
+                        sysctl &= ~TXDWA;
+                        bfin_write_EMAC_SYSCTL(sysctl);
+
+                        *((u16 *)(current_tx_ptr->packet)) = (u16)(skb->len);
+                        memcpy((u8 *)(current_tx_ptr->packet + 2), skb->data,
+                                skb->len);
+                        current_tx_ptr->desc_a.start_addr =
+                                (u32)current_tx_ptr->packet;
+                        if (current_tx_ptr->status.status_word != 0)
+                                current_tx_ptr->status.status_word = 0;
+                        blackfin_dcache_flush_range(
+                                (u32)current_tx_ptr->packet,
+                                (u32)(current_tx_ptr->packet + skb->len + 2));
+                }
         }
 
         /* enable this packet's dma */
@@ -691,7 +742,6 @@ static void bfin_mac_rx(struct net_device *dev)
                                          (unsigned long)skb->tail);
 
         dev->last_rx = jiffies;
-        skb->dev = dev;
         skb->protocol = eth_type_trans(skb, dev);
 #if defined(BFIN_MAC_CSUM_OFFLOAD)
         skb->csum = current_rx_ptr->status.ip_payload_csum;
@@ -920,6 +970,7 @@ static int bfin_mac_open(struct net_device *dev)
         phy_start(lp->phydev);
         phy_write(lp->phydev, MII_BMCR, BMCR_RESET);
         setup_system_regs(dev);
+        setup_mac_addr(dev->dev_addr);
         bfin_mac_disable();
         bfin_mac_enable();
         pr_debug("hardware init finished\n");
@@ -955,7 +1006,7 @@ static int bfin_mac_close(struct net_device *dev)
         return 0;
 }
 
-static int __init bfin_mac_probe(struct platform_device *pdev)
+static int __devinit bfin_mac_probe(struct platform_device *pdev)
 {
         struct net_device *ndev;
         struct bfin_mac_local *lp;
@@ -1081,7 +1132,7 @@ out_err_probe_mac:
         return rc;
 }
 
-static int bfin_mac_remove(struct platform_device *pdev)
+static int __devexit bfin_mac_remove(struct platform_device *pdev)
 {
         struct net_device *ndev = platform_get_drvdata(pdev);
         struct bfin_mac_local *lp = netdev_priv(ndev);
@@ -1128,7 +1179,7 @@ static int bfin_mac_resume(struct platform_device *pdev)
 
 static struct platform_driver bfin_mac_driver = {
         .probe = bfin_mac_probe,
-        .remove = bfin_mac_remove,
+        .remove = __devexit_p(bfin_mac_remove),
         .resume = bfin_mac_resume,
         .suspend = bfin_mac_suspend,
         .driver = {
diff --git a/drivers/net/cxgb3/t3_hw.c b/drivers/net/cxgb3/t3_hw.c
index 47d51788a462..04c0e90119af 100644
--- a/drivers/net/cxgb3/t3_hw.c
+++ b/drivers/net/cxgb3/t3_hw.c
@@ -683,7 +683,7 @@ enum {
         SF_ERASE_SECTOR = 0xd8, /* erase sector */
 
         FW_FLASH_BOOT_ADDR = 0x70000,   /* start address of FW in flash */
-        FW_VERS_ADDR = 0x77ffc,    /* flash address holding FW version */
+        FW_VERS_ADDR = 0x7fffc,    /* flash address holding FW version */
         FW_MIN_SIZE = 8            /* at least version and csum */
 };
 
diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c
index 0920b796bd78..b70c5314f537 100644
--- a/drivers/net/ehea/ehea_main.c
+++ b/drivers/net/ehea/ehea_main.c
@@ -2937,9 +2937,9 @@ static void ehea_rereg_mrs(struct work_struct *work)
                                 }
                         }
                 }
-       mutex_unlock(&dlpar_mem_lock);
-       ehea_info("re-initializing driver complete");
+        ehea_info("re-initializing driver complete");
 out:
+        mutex_unlock(&dlpar_mem_lock);
         return;
 }
 
diff --git a/drivers/net/enc28j60.c b/drivers/net/enc28j60.c
index c05cb159c772..aa0bf6e1c694 100644
--- a/drivers/net/enc28j60.c
+++ b/drivers/net/enc28j60.c
@@ -1547,8 +1547,10 @@ static int __devinit enc28j60_probe(struct spi_device *spi)
         random_ether_addr(dev->dev_addr);
         enc28j60_set_hw_macaddr(dev);
 
-        ret = request_irq(spi->irq, enc28j60_irq, IRQF_TRIGGER_FALLING,
-                          DRV_NAME, priv);
+        /* Board setup must set the relevant edge trigger type;
+         * level triggers won't currently work.
+         */
+        ret = request_irq(spi->irq, enc28j60_irq, 0, DRV_NAME, priv);
         if (ret < 0) {
                 if (netif_msg_probe(priv))
                         dev_err(&spi->dev, DRV_NAME ": request irq %d failed "
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index 4ed89fa9ae46..01b38b092c76 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -333,6 +333,7 @@ enum {
         NvRegPowerState2 = 0x600,
 #define NVREG_POWERSTATE2_POWERUP_MASK          0x0F11
 #define NVREG_POWERSTATE2_POWERUP_REV_A3        0x0001
+#define NVREG_POWERSTATE2_PHY_RESET             0x0004
 };
 
 /* Big endian: should work, but is untested */
@@ -529,6 +530,7 @@ union ring_type {
 #define PHY_REALTEK_INIT_REG4   0x14
 #define PHY_REALTEK_INIT_REG5   0x18
 #define PHY_REALTEK_INIT_REG6   0x11
+#define PHY_REALTEK_INIT_REG7   0x01
 #define PHY_REALTEK_INIT1       0x0000
 #define PHY_REALTEK_INIT2       0x8e00
 #define PHY_REALTEK_INIT3       0x0001
@@ -537,6 +539,9 @@ union ring_type {
 #define PHY_REALTEK_INIT6       0xf5c7
 #define PHY_REALTEK_INIT7       0x1000
 #define PHY_REALTEK_INIT8       0x0003
+#define PHY_REALTEK_INIT9       0x0008
+#define PHY_REALTEK_INIT10      0x0005
+#define PHY_REALTEK_INIT11      0x0200
 #define PHY_REALTEK_INIT_MSK1   0x0003
 
 #define PHY_GIGABIT     0x0100
@@ -1149,6 +1154,42 @@ static int phy_init(struct net_device *dev)
                                 return PHY_ERROR;
                         }
                 }
+                if (np->phy_model == PHY_MODEL_REALTEK_8211 &&
+                    np->phy_rev == PHY_REV_REALTEK_8211C) {
+                        u32 powerstate = readl(base + NvRegPowerState2);
+
+                        /* need to perform hw phy reset */
+                        powerstate |= NVREG_POWERSTATE2_PHY_RESET;
+                        writel(powerstate, base + NvRegPowerState2);
+                        msleep(25);
+
+                        powerstate &= ~NVREG_POWERSTATE2_PHY_RESET;
+                        writel(powerstate, base + NvRegPowerState2);
+                        msleep(25);
+
+                        reg = mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG6, MII_READ);
+                        reg |= PHY_REALTEK_INIT9;
+                        if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG6, reg)) {
+                                printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+                                return PHY_ERROR;
+                        }
+                        if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT10)) {
+                                printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+                                return PHY_ERROR;
+                        }
+                        reg = mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG7, MII_READ);
+                        if (!(reg & PHY_REALTEK_INIT11)) {
+                                reg |= PHY_REALTEK_INIT11;
+                                if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG7, reg)) {
+                                        printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+                                        return PHY_ERROR;
+                                }
+                        }
+                        if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT1)) {
+                                printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+                                return PHY_ERROR;
+                        }
+                }
                 if (np->phy_model == PHY_MODEL_REALTEK_8201) {
                         if (np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_32 ||
                             np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_33 ||
@@ -1201,12 +1242,23 @@ static int phy_init(struct net_device *dev)
         mii_control = mii_rw(dev, np->phyaddr, MII_BMCR, MII_READ);
         mii_control |= BMCR_ANENABLE;
 
-        /* reset the phy
-         * (certain phys need bmcr to be setup with reset)
-         */
-        if (phy_reset(dev, mii_control)) {
-                printk(KERN_INFO "%s: phy reset failed\n", pci_name(np->pci_dev));
-                return PHY_ERROR;
+        if (np->phy_oui == PHY_OUI_REALTEK &&
+            np->phy_model == PHY_MODEL_REALTEK_8211 &&
+            np->phy_rev == PHY_REV_REALTEK_8211C) {
+                /* start autoneg since we already performed hw reset above */
+                mii_control |= BMCR_ANRESTART;
+                if (mii_rw(dev, np->phyaddr, MII_BMCR, mii_control)) {
+                        printk(KERN_INFO "%s: phy init failed\n", pci_name(np->pci_dev));
+                        return PHY_ERROR;
+                }
+        } else {
+                /* reset the phy
+                 * (certain phys need bmcr to be setup with reset)
+                 */
+                if (phy_reset(dev, mii_control)) {
+                        printk(KERN_INFO "%s: phy reset failed\n", pci_name(np->pci_dev));
+                        return PHY_ERROR;
+                }
         }
 
         /* phy vendor specific configuration */
diff --git a/drivers/net/ibmveth.c b/drivers/net/ibmveth.c
index 91ec9fdc7184..a03fe1fb61ca 100644
--- a/drivers/net/ibmveth.c
+++ b/drivers/net/ibmveth.c
@@ -260,7 +260,7 @@ static void ibmveth_replenish_buffer_pool(struct ibmveth_adapter *adapter, struc
                 dma_addr = dma_map_single(&adapter->vdev->dev, skb->data,
                                 pool->buff_size, DMA_FROM_DEVICE);
 
-                if (dma_mapping_error((&adapter->vdev->dev, dma_addr))
+                if (dma_mapping_error(&adapter->vdev->dev, dma_addr))
                         goto failure;
 
                 pool->free_map[free_index] = IBM_VETH_INVALID_MAP;
@@ -294,7 +294,7 @@ failure:
                 pool->consumer_index = pool->size - 1;
         else
                 pool->consumer_index--;
-        if (!dma_mapping_error((&adapter->vdev->dev, dma_addr))
+        if (!dma_mapping_error(&adapter->vdev->dev, dma_addr))
                 dma_unmap_single(&adapter->vdev->dev,
                                  pool->dma_addr[index], pool->buff_size,
                                  DMA_FROM_DEVICE);
@@ -488,7 +488,7 @@ static void ibmveth_cleanup(struct ibmveth_adapter *adapter)
                                                  &adapter->rx_buff_pool[i]);
 
         if (adapter->bounce_buffer != NULL) {
-                if (!dma_mapping_error(adapter->bounce_buffer_dma)) {
+                if (!dma_mapping_error(dev, adapter->bounce_buffer_dma)) {
                         dma_unmap_single(&adapter->vdev->dev,
                                         adapter->bounce_buffer_dma,
                                         adapter->netdev->mtu + IBMVETH_BUFF_OH,
@@ -924,7 +924,7 @@ static int ibmveth_start_xmit(struct sk_buff *skb, struct net_device *netdev)
                 buf[1] = 0;
         }
 
-        if (dma_mapping_error((&adapter->vdev->dev, data_dma_addr)) {
+        if (dma_mapping_error(&adapter->vdev->dev, data_dma_addr)) {
                 if (!firmware_has_feature(FW_FEATURE_CMO))
                         ibmveth_error_printk("tx: unable to map xmit buffer\n");
                 skb_copy_from_linear_data(skb, adapter->bounce_buffer,
diff --git a/drivers/net/ifb.c b/drivers/net/ifb.c
index 0960e69b2da4..e4fbefc8c82f 100644
--- a/drivers/net/ifb.c
+++ b/drivers/net/ifb.c
@@ -69,18 +69,20 @@ static void ri_tasklet(unsigned long dev)
         struct net_device *_dev = (struct net_device *)dev;
         struct ifb_private *dp = netdev_priv(_dev);
         struct net_device_stats *stats = &_dev->stats;
+        struct netdev_queue *txq;
         struct sk_buff *skb;
 
+        txq = netdev_get_tx_queue(_dev, 0);
         dp->st_task_enter++;
         if ((skb = skb_peek(&dp->tq)) == NULL) {
                 dp->st_txq_refl_try++;
-                if (netif_tx_trylock(_dev)) {
+                if (__netif_tx_trylock(txq)) {
                         dp->st_rxq_enter++;
                         while ((skb = skb_dequeue(&dp->rq)) != NULL) {
                                 skb_queue_tail(&dp->tq, skb);
                                 dp->st_rx2tx_tran++;
                         }
-                        netif_tx_unlock(_dev);
+                        __netif_tx_unlock(txq);
                 } else {
                         /* reschedule */
                         dp->st_rxq_notenter++;
@@ -115,7 +117,7 @@ static void ri_tasklet(unsigned long dev)
                         BUG();
         }
 
-        if (netif_tx_trylock(_dev)) {
+        if (__netif_tx_trylock(txq)) {
                 dp->st_rxq_check++;
                 if ((skb = skb_peek(&dp->rq)) == NULL) {
                         dp->tasklet_pending = 0;
@@ -123,10 +125,10 @@ static void ri_tasklet(unsigned long dev)
                                 netif_wake_queue(_dev);
                 } else {
                         dp->st_rxq_rsch++;
-                        netif_tx_unlock(_dev);
+                        __netif_tx_unlock(txq);
                         goto resched;
                 }
-                netif_tx_unlock(_dev);
+                __netif_tx_unlock(txq);
         } else {
 resched:
                 dp->tasklet_pending = 1;
diff --git a/drivers/net/irda/act200l-sir.c b/drivers/net/irda/act200l-sir.c
index d8b89c74aabd..37ab8c855719 100644
--- a/drivers/net/irda/act200l-sir.c
+++ b/drivers/net/irda/act200l-sir.c
@@ -107,7 +107,7 @@ static int act200l_open(struct sir_dev *dev)
 {
         struct qos_info *qos = &dev->qos;
 
-        IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+        IRDA_DEBUG(2, "%s()\n", __func__ );
 
         /* Power on the dongle */
         sirdev_set_dtr_rts(dev, TRUE, TRUE);
@@ -124,7 +124,7 @@ static int act200l_open(struct sir_dev *dev)
 
 static int act200l_close(struct sir_dev *dev)
 {
-        IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+        IRDA_DEBUG(2, "%s()\n", __func__ );
 
         /* Power off the dongle */
         sirdev_set_dtr_rts(dev, FALSE, FALSE);
@@ -143,7 +143,7 @@ static int act200l_change_speed(struct sir_dev *dev, unsigned speed)
         u8 control[3];
         int ret = 0;
 
-        IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+        IRDA_DEBUG(2, "%s()\n", __func__ );
 
         /* Clear DTR and set RTS to enter command mode */
         sirdev_set_dtr_rts(dev, FALSE, TRUE);
@@ -212,7 +212,7 @@ static int act200l_reset(struct sir_dev *dev)
         };
         int ret = 0;
 
-        IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+        IRDA_DEBUG(2, "%s()\n", __func__ );
 
         switch (state) {
         case SIRDEV_STATE_DONGLE_RESET:
@@ -240,7 +240,7 @@ static int act200l_reset(struct sir_dev *dev)
                 dev->speed = 9600;
                 break;
         default:
-                IRDA_ERROR("%s(), unknown state %d\n", __FUNCTION__, state);
+                IRDA_ERROR("%s(), unknown state %d\n", __func__, state);
                 ret = -1;
                 break;
         }
diff --git a/drivers/net/irda/actisys-sir.c b/drivers/net/irda/actisys-sir.c
index 736d2473b7e1..50b2141a6103 100644
--- a/drivers/net/irda/actisys-sir.c
+++ b/drivers/net/irda/actisys-sir.c
@@ -165,7 +165,7 @@ static int actisys_change_speed(struct sir_dev *dev, unsigned speed)
         int ret = 0;
         int i = 0;
 
-        IRDA_DEBUG(4, "%s(), speed=%d (was %d)\n", __FUNCTION__,
+        IRDA_DEBUG(4, "%s(), speed=%d (was %d)\n", __func__,
                 speed, dev->speed);
 
         /* dongle was already resetted from irda_request state machine,
diff --git a/drivers/net/irda/ali-ircc.c b/drivers/net/irda/ali-ircc.c
index 083b0dd70fef..2ff181861d2d 100644
--- a/drivers/net/irda/ali-ircc.c
+++ b/drivers/net/irda/ali-ircc.c
@@ -152,7 +152,7 @@ static int __init ali_ircc_init(void)
         int reg, revision;
         int i = 0;
         
-        IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__);
+        IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__);
 
         ret = platform_driver_register(&ali_ircc_driver);
         if (ret) {
@@ -166,7 +166,7 @@ static int __init ali_ircc_init(void)
         /* Probe for all the ALi chipsets we know about */
         for (chip= chips; chip->name; chip++, i++) 
         {
-                IRDA_DEBUG(2, "%s(), Probing for %s ...\n", __FUNCTION__, chip->name);
+                IRDA_DEBUG(2, "%s(), Probing for %s ...\n", __func__, chip->name);
                                 
                 /* Try all config registers for this chip */
                 for (cfg=0; cfg<2; cfg++)
@@ -196,11 +196,11 @@ static int __init ali_ircc_init(void)
                                 
                         if (reg == chip->cid_value)
                         {
-                                IRDA_DEBUG(2, "%s(), Chip found at 0x%03x\n", __FUNCTION__, cfg_base);
+                                IRDA_DEBUG(2, "%s(), Chip found at 0x%03x\n", __func__, cfg_base);
                                            
                                 outb(0x1F, cfg_base);
                                 revision = inb(cfg_base+1);
-                                IRDA_DEBUG(2, "%s(), Found %s chip, revision=%d\n", __FUNCTION__,
+                                IRDA_DEBUG(2, "%s(), Found %s chip, revision=%d\n", __func__,
                                            chip->name, revision);                                       
                                 
                                 /* 
@@ -223,14 +223,14 @@ static int __init ali_ircc_init(void)
                         }
                         else
                         {
-                                IRDA_DEBUG(2, "%s(), No %s chip at 0x%03x\n", __FUNCTION__, chip->name, cfg_base);
+                                IRDA_DEBUG(2, "%s(), No %s chip at 0x%03x\n", __func__, chip->name, cfg_base);
                         }
                         /* Exit configuration */
                         outb(0xbb, cfg_base);
                 }
         }               
                 
-        IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __FUNCTION__);                                                 
+        IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __func__);
 
         if (ret)
                 platform_driver_unregister(&ali_ircc_driver);
@@ -248,7 +248,7 @@ static void __exit ali_ircc_cleanup(void)
 {
         int i;
 
-        IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__); 
+        IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__);
 
         for (i=0; i < ARRAY_SIZE(dev_self); i++) {
                 if (dev_self[i])
@@ -257,7 +257,7 @@ static void __exit ali_ircc_cleanup(void)
         
         platform_driver_unregister(&ali_ircc_driver);
 
-        IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __FUNCTION__);
+        IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __func__);
 }
 
 /*
@@ -273,11 +273,11 @@ static int ali_ircc_open(int i, chipio_t *info)
         int dongle_id;
         int err;
                         
-        IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__); 
+        IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__);
 
         if (i >= ARRAY_SIZE(dev_self)) {
                 IRDA_ERROR("%s(), maximum number of supported chips reached!\n",
-                           __FUNCTION__);
+                           __func__);
                 return -ENOMEM;
         }
         
@@ -288,7 +288,7 @@ static int ali_ircc_open(int i, chipio_t *info)
         dev = alloc_irdadev(sizeof(*self));
         if (dev == NULL) {
                 IRDA_ERROR("%s(), can't allocate memory for control block!\n",
-                           __FUNCTION__);
+                           __func__);
                 return -ENOMEM;
         }
 
@@ -312,7 +312,7 @@ static int ali_ircc_open(int i, chipio_t *info)
         /* Reserve the ioports that we need */
         if (!request_region(self->io.fir_base, self->io.fir_ext,
                             ALI_IRCC_DRIVER_NAME)) {
-                IRDA_WARNING("%s(), can't get iobase of 0x%03x\n", __FUNCTION__,
+                IRDA_WARNING("%s(), can't get iobase of 0x%03x\n", __func__,
                         self->io.fir_base);
                 err = -ENODEV;
                 goto err_out1;
@@ -370,19 +370,19 @@ static int ali_ircc_open(int i, chipio_t *info)
 
         err = register_netdev(dev);
         if (err) {
-                IRDA_ERROR("%s(), register_netdev() failed!\n", __FUNCTION__);
+                IRDA_ERROR("%s(), register_netdev() failed!\n", __func__);
                 goto err_out4;
         }
         IRDA_MESSAGE("IrDA: Registered device %s\n", dev->name);
 
         /* Check dongle id */
         dongle_id = ali_ircc_read_dongle_id(i, info);
-        IRDA_MESSAGE("%s(), %s, Found dongle: %s\n", __FUNCTION__,
+        IRDA_MESSAGE("%s(), %s, Found dongle: %s\n", __func__,
                      ALI_IRCC_DRIVER_NAME, dongle_types[dongle_id]);
                 
         self->io.dongle_id = dongle_id;
 
-        IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __FUNCTION__);
+        IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __func__);
         
         return 0;
 
@@ -411,7 +411,7 @@ static int __exit ali_ircc_close(struct ali_ircc_cb *self)
 {
         int iobase;
 
-        IRDA_DEBUG(4, "%s(), ---------------- Start ----------------\n", __FUNCTION__);
+        IRDA_DEBUG(4, "%s(), ---------------- Start ----------------\n", __func__);
 
         IRDA_ASSERT(self != NULL, return -1;);
 
@@ -421,7 +421,7 @@ static int __exit ali_ircc_close(struct ali_ircc_cb *self)
         unregister_netdev(self->netdev);
 
         /* Release the PORT that this driver is using */
-        IRDA_DEBUG(4, "%s(), Releasing Region %03x\n", __FUNCTION__, self->io.fir_base);
+        IRDA_DEBUG(4, "%s(), Releasing Region %03x\n", __func__, self->io.fir_base);
         release_region(self->io.fir_base, self->io.fir_ext);
 
         if (self->tx_buff.head)
@@ -435,7 +435,7 @@ static int __exit ali_ircc_close(struct ali_ircc_cb *self)
         dev_self[self->index] = NULL;
         free_netdev(self->netdev);
         
-        IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __FUNCTION__);
+        IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __func__);
         
         return 0;
 }
@@ -478,7 +478,7 @@ static int ali_ircc_probe_53(ali_chip_t *chip, chipio_t *info)
         int cfg_base = info->cfg_base;
         int hi, low, reg;
         
-        IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__);
+        IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__);
         
         /* Enter Configuration */
         outb(chip->entr1, cfg_base);
@@ -497,13 +497,13 @@ static int ali_ircc_probe_53(ali_chip_t *chip, chipio_t *info)
         
         info->sir_base = info->fir_base;
         
-        IRDA_DEBUG(2, "%s(), probing fir_base=0x%03x\n", __FUNCTION__, info->fir_base);
+        IRDA_DEBUG(2, "%s(), probing fir_base=0x%03x\n", __func__, info->fir_base);
                 
         /* Read IRQ control register */
         outb(0x70, cfg_base);
         reg = inb(cfg_base+1);
         info->irq = reg & 0x0f;
-        IRDA_DEBUG(2, "%s(), probing irq=%d\n", __FUNCTION__, info->irq);
+        IRDA_DEBUG(2, "%s(), probing irq=%d\n", __func__, info->irq);
         
         /* Read DMA channel */
         outb(0x74, cfg_base);
@@ -511,26 +511,26 @@ static int ali_ircc_probe_53(ali_chip_t *chip, chipio_t *info)
         info->dma = reg & 0x07;
         
         if(info->dma == 0x04)
-                IRDA_WARNING("%s(), No DMA channel assigned !\n", __FUNCTION__);
+                IRDA_WARNING("%s(), No DMA channel assigned !\n", __func__);
         else
-                IRDA_DEBUG(2, "%s(), probing dma=%d\n", __FUNCTION__, info->dma);
+                IRDA_DEBUG(2, "%s(), probing dma=%d\n", __func__, info->dma);
         
         /* Read Enabled Status */
         outb(0x30, cfg_base);
         reg = inb(cfg_base+1);
         info->enabled = (reg & 0x80) && (reg & 0x01);
-        IRDA_DEBUG(2, "%s(), probing enabled=%d\n", __FUNCTION__, info->enabled);
+        IRDA_DEBUG(2, "%s(), probing enabled=%d\n", __func__, info->enabled);
         
         /* Read Power Status */
         outb(0x22, cfg_base);
         reg = inb(cfg_base+1);
         info->suspended = (reg & 0x20);
-        IRDA_DEBUG(2, "%s(), probing suspended=%d\n", __FUNCTION__, info->suspended);
+        IRDA_DEBUG(2, "%s(), probing suspended=%d\n", __func__, info->suspended);
         
         /* Exit configuration */
         outb(0xbb, cfg_base);
                 
-        IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __FUNCTION__); 
+        IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __func__);
         
         return 0;       
 }
@@ -548,7 +548,7 @@ static int ali_ircc_setup(chipio_t *info)
         int version;
         int iobase = info->fir_base;
         
-        IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__);
+        IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__);
         
         /* Locking comments :
          * Most operations here need to be protected. We are called before
@@ -609,7 +609,7 @@ static int ali_ircc_setup(chipio_t *info)
         // outb(UART_IER_RDI, iobase+UART_IER); //benjamin 2000/11/23 01:25PM
         // Turn on the interrupts in ali_ircc_net_open
         
-        IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__);        
+        IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__);
         
         return 0;
 }
@@ -626,7 +626,7 @@ static int ali_ircc_read_dongle_id (int i, chipio_t *info)
         int dongle_id, reg;
         int cfg_base = info->cfg_base;
         
-        IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__);
+        IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__);
                 
         /* Enter Configuration */
         outb(chips[i].entr1, cfg_base);
@@ -640,13 +640,13 @@ static int ali_ircc_read_dongle_id (int i, chipio_t *info)
         outb(0xf0, cfg_base);
         reg = inb(cfg_base+1);  
         dongle_id = ((reg>>6)&0x02) | ((reg>>5)&0x01);
-        IRDA_DEBUG(2, "%s(), probing dongle_id=%d, dongle_types=%s\n", __FUNCTION__, 
+        IRDA_DEBUG(2, "%s(), probing dongle_id=%d, dongle_types=%s\n", __func__,
                 dongle_id, dongle_types[dongle_id]);
         
         /* Exit configuration */
         outb(0xbb, cfg_base);
                         
-        IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__);        
+        IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__);
         
         return dongle_id;
 }
@@ -663,7 +663,7 @@ static irqreturn_t ali_ircc_interrupt(int irq, void *dev_id)
         struct ali_ircc_cb *self;
         int ret;
                 
-        IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__);
+        IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__);
                 
         self = dev->priv;
         
@@ -677,7 +677,7 @@ static irqreturn_t ali_ircc_interrupt(int irq, void *dev_id)
                 
         spin_unlock(&self->lock);
         
-        IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__);
+        IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__);
         return ret;
 }
 /*
@@ -691,7 +691,7 @@ static irqreturn_t ali_ircc_fir_interrupt(struct ali_ircc_cb *self)
         __u8 eir, OldMessageCount;
         int iobase, tmp;
         
-        IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __FUNCTION__);
+        IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __func__);
         
         iobase = self->io.fir_base;
         
@@ -704,10 +704,10 @@ static irqreturn_t ali_ircc_fir_interrupt(struct ali_ircc_cb *self)
         //self->ier = inb(iobase+FIR_IER);              2000/12/1 04:32PM
         eir = self->InterruptID & self->ier; /* Mask out the interesting ones */ 
         
-        IRDA_DEBUG(1, "%s(), self->InterruptID = %x\n", __FUNCTION__,self->InterruptID);
-        IRDA_DEBUG(1, "%s(), self->LineStatus = %x\n", __FUNCTION__,self->LineStatus);
-        IRDA_DEBUG(1, "%s(), self->ier = %x\n", __FUNCTION__,self->ier);
-        IRDA_DEBUG(1, "%s(), eir = %x\n", __FUNCTION__,eir);
+        IRDA_DEBUG(1, "%s(), self->InterruptID = %x\n", __func__,self->InterruptID);
+        IRDA_DEBUG(1, "%s(), self->LineStatus = %x\n", __func__,self->LineStatus);
+        IRDA_DEBUG(1, "%s(), self->ier = %x\n", __func__,self->ier);
+        IRDA_DEBUG(1, "%s(), eir = %x\n", __func__,eir);
         
         /* Disable interrupts */
          SetCOMInterrupts(self, FALSE);
@@ -718,7 +718,7 @@ static irqreturn_t ali_ircc_fir_interrupt(struct ali_ircc_cb *self)
         {               
                 if (self->io.direction == IO_XMIT) /* TX */
                 {
-                        IRDA_DEBUG(1, "%s(), ******* IIR_EOM (Tx) *******\n", __FUNCTION__);
+                        IRDA_DEBUG(1, "%s(), ******* IIR_EOM (Tx) *******\n", __func__);
                         
                         if(ali_ircc_dma_xmit_complete(self))
                         {
@@ -737,23 +737,23 @@ static irqreturn_t ali_ircc_fir_interrupt(struct ali_ircc_cb *self)
                 }       
                 else /* RX */
                 {
-                        IRDA_DEBUG(1, "%s(), ******* IIR_EOM (Rx) *******\n", __FUNCTION__);
+                        IRDA_DEBUG(1, "%s(), ******* IIR_EOM (Rx) *******\n", __func__);
                         
                         if(OldMessageCount > ((self->LineStatus+1) & 0x07))
                         {
                                 self->rcvFramesOverflow = TRUE; 
-                                IRDA_DEBUG(1, "%s(), ******* self->rcvFramesOverflow = TRUE ******** \n", __FUNCTION__);
+                                IRDA_DEBUG(1, "%s(), ******* self->rcvFramesOverflow = TRUE ******** \n", __func__);
                         }
                                                 
                         if (ali_ircc_dma_receive_complete(self))
                         {
-                                IRDA_DEBUG(1, "%s(), ******* receive complete ******** \n", __FUNCTION__);
+                                IRDA_DEBUG(1, "%s(), ******* receive complete ******** \n", __func__);
                                 
                                 self->ier = IER_EOM;                            
                         }
                         else
                         {
-                                IRDA_DEBUG(1, "%s(), ******* Not receive complete ******** \n", __FUNCTION__);
+                                IRDA_DEBUG(1, "%s(), ******* Not receive complete ******** \n", __func__);
                                 
                                 self->ier = IER_EOM | IER_TIMER;                                                                
                         }       
@@ -766,7 +766,7 @@ static irqreturn_t ali_ircc_fir_interrupt(struct ali_ircc_cb *self)
                 if(OldMessageCount > ((self->LineStatus+1) & 0x07))
                 {
                         self->rcvFramesOverflow = TRUE; 
-                        IRDA_DEBUG(1, "%s(), ******* self->rcvFramesOverflow = TRUE ******* \n", __FUNCTION__);
+                        IRDA_DEBUG(1, "%s(), ******* self->rcvFramesOverflow = TRUE ******* \n", __func__);
                 }
                 /* Disable Timer */
                 switch_bank(iobase, BANK1);
@@ -798,7 +798,7 @@ static irqreturn_t ali_ircc_fir_interrupt(struct ali_ircc_cb *self)
         /* Restore Interrupt */ 
         SetCOMInterrupts(self, TRUE);   
                 
-        IRDA_DEBUG(1, "%s(), ----------------- End ---------------\n", __FUNCTION__);
+        IRDA_DEBUG(1, "%s(), ----------------- End ---------------\n", __func__);
         return IRQ_RETVAL(eir);
 }
 
@@ -813,7 +813,7 @@ static irqreturn_t ali_ircc_sir_interrupt(struct ali_ircc_cb *self)
         int iobase;
         int iir, lsr;
         
-        IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__);
+        IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__);
         
         iobase = self->io.sir_base;
 
@@ -822,13 +822,13 @@ static irqreturn_t ali_ircc_sir_interrupt(struct ali_ircc_cb *self)
                 /* Clear interrupt */
                 lsr = inb(iobase+UART_LSR);
 
-                IRDA_DEBUG(4, "%s(), iir=%02x, lsr=%02x, iobase=%#x\n", __FUNCTION__, 
+                IRDA_DEBUG(4, "%s(), iir=%02x, lsr=%02x, iobase=%#x\n", __func__,
                            iir, lsr, iobase);
 
                 switch (iir) 
                 {
                         case UART_IIR_RLSI:
-                                IRDA_DEBUG(2, "%s(), RLSI\n", __FUNCTION__);
+                                IRDA_DEBUG(2, "%s(), RLSI\n", __func__);
                                 break;
                         case UART_IIR_RDI:
                                 /* Receive interrupt */
@@ -842,14 +842,14 @@ static irqreturn_t ali_ircc_sir_interrupt(struct ali_ircc_cb *self)
                                 }                               
                                 break;
                         default:
-                                IRDA_DEBUG(0, "%s(), unhandled IIR=%#x\n", __FUNCTION__, iir);
+                                IRDA_DEBUG(0, "%s(), unhandled IIR=%#x\n", __func__, iir);
                                 break;
                 } 
                 
         }
         
         
-        IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__);        
+        IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__);
 
         return IRQ_RETVAL(iir);
 }
@@ -866,7 +866,7 @@ static void ali_ircc_sir_receive(struct ali_ircc_cb *self)
         int boguscount = 0;
         int iobase;
         
-        IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__);
+        IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__);
         IRDA_ASSERT(self != NULL, return;);
 
         iobase = self->io.sir_base;
@@ -881,12 +881,12 @@ static void ali_ircc_sir_receive(struct ali_ircc_cb *self)
 
                 /* Make sure we don't stay here too long */
                 if (boguscount++ > 32) {
-                        IRDA_DEBUG(2,"%s(), breaking!\n", __FUNCTION__);
+                        IRDA_DEBUG(2,"%s(), breaking!\n", __func__);
                         break;
                 }
         } while (inb(iobase+UART_LSR) & UART_LSR_DR);   
         
-        IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );       
+        IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
 }
 
 /*
@@ -903,7 +903,7 @@ static void ali_ircc_sir_write_wakeup(struct ali_ircc_cb *self)
 
         IRDA_ASSERT(self != NULL, return;);
 
-        IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
+        IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__ );
         
         iobase = self->io.sir_base;
 
@@ -922,16 +922,16 @@ static void ali_ircc_sir_write_wakeup(struct ali_ircc_cb *self)
                 {
                         /* We must wait until all data are gone */
                         while(!(inb(iobase+UART_LSR) & UART_LSR_TEMT))
-                                IRDA_DEBUG(1, "%s(), UART_LSR_THRE\n", __FUNCTION__ );
+                                IRDA_DEBUG(1, "%s(), UART_LSR_THRE\n", __func__ );
                         
-                        IRDA_DEBUG(1, "%s(), Changing speed! self->new_speed = %d\n", __FUNCTION__ , self->new_speed);
+                        IRDA_DEBUG(1, "%s(), Changing speed! self->new_speed = %d\n", __func__ , self->new_speed);
                         ali_ircc_change_speed(self, self->new_speed);
                         self->new_speed = 0;                    
                         
                         // benjamin 2000/11/10 06:32PM
                         if (self->io.speed > 115200)
                         {
-                                IRDA_DEBUG(2, "%s(), ali_ircc_change_speed from UART_LSR_TEMT \n", __FUNCTION__ );                              
+                                IRDA_DEBUG(2, "%s(), ali_ircc_change_speed from UART_LSR_TEMT \n", __func__ );
                                         
                                 self->ier = IER_EOM;
                                 // SetCOMInterrupts(self, TRUE);                                                        
@@ -949,7 +949,7 @@ static void ali_ircc_sir_write_wakeup(struct ali_ircc_cb *self)
                 outb(UART_IER_RDI, iobase+UART_IER);
         }
                 
-        IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );       
+        IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
 }
 
 static void ali_ircc_change_speed(struct ali_ircc_cb *self, __u32 baud)
@@ -957,9 +957,9 @@ static void ali_ircc_change_speed(struct ali_ircc_cb *self, __u32 baud)
         struct net_device *dev = self->netdev;
         int iobase;
         
-        IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
+        IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __func__ );
         
-        IRDA_DEBUG(2, "%s(), setting speed = %d \n", __FUNCTION__ , baud);
+        IRDA_DEBUG(2, "%s(), setting speed = %d \n", __func__ , baud);
         
         /* This function *must* be called with irq off and spin-lock.
          * - Jean II */
@@ -998,7 +998,7 @@ static void ali_ircc_change_speed(struct ali_ircc_cb *self, __u32 baud)
                 
         netif_wake_queue(self->netdev); 
         
-        IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );       
+        IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
 }
 
 static void ali_ircc_fir_change_speed(struct ali_ircc_cb *priv, __u32 baud)
@@ -1008,14 +1008,14 @@ static void ali_ircc_fir_change_speed(struct ali_ircc_cb *priv, __u32 baud)
         struct ali_ircc_cb *self = (struct ali_ircc_cb *) priv;
         struct net_device *dev;
 
-        IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
+        IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __func__ );
                 
         IRDA_ASSERT(self != NULL, return;);
 
         dev = self->netdev;
         iobase = self->io.fir_base;
         
-        IRDA_DEBUG(1, "%s(), self->io.speed = %d, change to speed = %d\n", __FUNCTION__ ,self->io.speed,baud);
+        IRDA_DEBUG(1, "%s(), self->io.speed = %d, change to speed = %d\n", __func__ ,self->io.speed,baud);
         
         /* Come from SIR speed */
         if(self->io.speed <=115200)
@@ -1029,7 +1029,7 @@ static void ali_ircc_fir_change_speed(struct ali_ircc_cb *priv, __u32 baud)
         // Set Dongle Speed mode
         ali_ircc_change_dongle_speed(self, baud);
                 
-        IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ );       
+        IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ );
 }
 
 /*
@@ -1047,9 +1047,9 @@ static void ali_ircc_sir_change_speed(struct ali_ircc_cb *priv, __u32 speed)
         int lcr;    /* Line control reg */
         int divisor;
 
-        IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
+        IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __func__ );
         
-        IRDA_DEBUG(1, "%s(), Setting speed to: %d\n", __FUNCTION__ , speed);
+        IRDA_DEBUG(1, "%s(), Setting speed to: %d\n", __func__ , speed);
 
         IRDA_ASSERT(self != NULL, return;);
 
@@ -1103,7 +1103,7 @@ static void ali_ircc_sir_change_speed(struct ali_ircc_cb *priv, __u32 speed)
         
         spin_unlock_irqrestore(&self->lock, flags);
         
-        IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ );       
+        IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ );
 }
 
 static void ali_ircc_change_dongle_speed(struct ali_ircc_cb *priv, int speed)
@@ -1113,14 +1113,14 @@ static void ali_ircc_change_dongle_speed(struct ali_ircc_cb *priv, int speed)
         int iobase,dongle_id;
         int tmp = 0;
                         
-        IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );        
+        IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __func__ );
         
         iobase = self->io.fir_base;     /* or iobase = self->io.sir_base; */
         dongle_id = self->io.dongle_id;
         
         /* We are already locked, no need to do it again */
                 
-        IRDA_DEBUG(1, "%s(), Set Speed for %s , Speed = %d\n", __FUNCTION__ , dongle_types[dongle_id], speed);          
+        IRDA_DEBUG(1, "%s(), Set Speed for %s , Speed = %d\n", __func__ , dongle_types[dongle_id], speed);
         
         switch_bank(iobase, BANK2);
         tmp = inb(iobase+FIR_IRDA_CR);
@@ -1284,7 +1284,7 @@ static void ali_ircc_change_dongle_speed(struct ali_ircc_cb *priv, int speed)
                         
         switch_bank(iobase, BANK0);
         
-        IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ );               
+        IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ );
 }
 
 /*
@@ -1297,11 +1297,11 @@ static int ali_ircc_sir_write(int iobase, int fifo_size, __u8 *buf, int len)
 {
         int actual = 0;
         
-        IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
+        IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__ );
                 
         /* Tx FIFO should be empty! */
         if (!(inb(iobase+UART_LSR) & UART_LSR_THRE)) {
-                IRDA_DEBUG(0, "%s(), failed, fifo not empty!\n", __FUNCTION__ );
+                IRDA_DEBUG(0, "%s(), failed, fifo not empty!\n", __func__ );
                 return 0;
         }
         
@@ -1313,7 +1313,7 @@ static int ali_ircc_sir_write(int iobase, int fifo_size, __u8 *buf, int len)
                 actual++;
         }
         
-        IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );       
+        IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
         return actual;
 }
 
@@ -1329,7 +1329,7 @@ static int ali_ircc_net_open(struct net_device *dev)
         int iobase;
         char hwname[32];
                 
-        IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
+        IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__ );
         
         IRDA_ASSERT(dev != NULL, return -1;);
         
@@ -1375,7 +1375,7 @@ static int ali_ircc_net_open(struct net_device *dev)
          */
         self->irlap = irlap_open(dev, &self->qos, hwname);
                 
-        IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );       
+        IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
         
         return 0;
 }
@@ -1392,7 +1392,7 @@ static int ali_ircc_net_close(struct net_device *dev)
         struct ali_ircc_cb *self;
         //int iobase;
                         
-        IRDA_DEBUG(4, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
+        IRDA_DEBUG(4, "%s(), ---------------- Start ----------------\n", __func__ );
                 
         IRDA_ASSERT(dev != NULL, return -1;);
 
@@ -1415,7 +1415,7 @@ static int ali_ircc_net_close(struct net_device *dev)
         free_irq(self->io.irq, dev);
         free_dma(self->io.dma);
 
-        IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );       
+        IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
         
         return 0;
 }
@@ -1434,7 +1434,7 @@ static int ali_ircc_fir_hard_xmit(struct sk_buff *skb, struct net_device *dev)
         __u32 speed;
         int mtt, diff;
         
-        IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __FUNCTION__ );       
+        IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __func__ );
         
         self = (struct ali_ircc_cb *) dev->priv;
         iobase = self->io.fir_base;
@@ -1488,7 +1488,7 @@ static int ali_ircc_fir_hard_xmit(struct sk_buff *skb, struct net_device *dev)
                         diff = self->now.tv_usec - self->stamp.tv_usec;
                         /* self->stamp is set from ali_ircc_dma_receive_complete() */
                                                         
-                        IRDA_DEBUG(1, "%s(), ******* diff = %d ******* \n", __FUNCTION__ , diff);       
+                        IRDA_DEBUG(1, "%s(), ******* diff = %d ******* \n", __func__ , diff);
                         
                         if (diff < 0) 
                                 diff += 1000000;
@@ -1510,7 +1510,7 @@ static int ali_ircc_fir_hard_xmit(struct sk_buff *skb, struct net_device *dev)
                                         /* Adjust for timer resolution */
                                         mtt = (mtt+250) / 500;  /* 4 discard, 5 get advanced, Let's round off */
                                         
-                                        IRDA_DEBUG(1, "%s(), ************** mtt = %d ***********\n", __FUNCTION__ , mtt);       
+                                        IRDA_DEBUG(1, "%s(), ************** mtt = %d ***********\n", __func__ , mtt);
                                         
                                         /* Setup timer */
                                         if (mtt == 1) /* 500 us */
@@ -1567,7 +1567,7 @@ static int ali_ircc_fir_hard_xmit(struct sk_buff *skb, struct net_device *dev)
         spin_unlock_irqrestore(&self->lock, flags);
         dev_kfree_skb(skb);
 
-        IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ );       
+        IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ );
         return 0;       
 }
 
@@ -1578,7 +1578,7 @@ static void ali_ircc_dma_xmit(struct ali_ircc_cb *self)
         unsigned char FIFO_OPTI, Hi, Lo;
         
         
-        IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __FUNCTION__ );       
+        IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __func__ );
         
         iobase = self->io.fir_base;
         
@@ -1629,7 +1629,7 @@ static void ali_ircc_dma_xmit(struct ali_ircc_cb *self)
         tmp = inb(iobase+FIR_LCR_B);
         tmp &= ~0x20; // Disable SIP
         outb(((unsigned char)(tmp & 0x3f) | LCR_B_TX_MODE) & ~LCR_B_BW, iobase+FIR_LCR_B);
-        IRDA_DEBUG(1, "%s(), ******* Change to TX mode: FIR_LCR_B = 0x%x ******* \n", __FUNCTION__ , inb(iobase+FIR_LCR_B));
+        IRDA_DEBUG(1, "%s(), ******* Change to TX mode: FIR_LCR_B = 0x%x ******* \n", __func__ , inb(iobase+FIR_LCR_B));
         
         outb(0, iobase+FIR_LSR);
                         
@@ -1639,7 +1639,7 @@ static void ali_ircc_dma_xmit(struct ali_ircc_cb *self)
         
         switch_bank(iobase, BANK0); 
         
-        IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
+        IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ );
 }
 
 static int  ali_ircc_dma_xmit_complete(struct ali_ircc_cb *self)
@@ -1647,7 +1647,7 @@ static int  ali_ircc_dma_xmit_complete(struct ali_ircc_cb *self)
         int iobase;
         int ret = TRUE;
         
-        IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __FUNCTION__ );       
+        IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __func__ );
         
         iobase = self->io.fir_base;
         
@@ -1660,7 +1660,7 @@ static int  ali_ircc_dma_xmit_complete(struct ali_ircc_cb *self)
         if((inb(iobase+FIR_LSR) & LSR_FRAME_ABORT) == LSR_FRAME_ABORT)
         
         {
-                IRDA_ERROR("%s(), ********* LSR_FRAME_ABORT *********\n", __FUNCTION__);        
+                IRDA_ERROR("%s(), ********* LSR_FRAME_ABORT *********\n", __func__);
                 self->stats.tx_errors++;
                 self->stats.tx_fifo_errors++;           
         }
@@ -1703,7 +1703,7 @@ static int  ali_ircc_dma_xmit_complete(struct ali_ircc_cb *self)
                 
         switch_bank(iobase, BANK0); 
         
-        IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ );       
+        IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ );
         return ret;
 }
 
@@ -1718,7 +1718,7 @@ static int ali_ircc_dma_receive(struct ali_ircc_cb *self)
 {
         int iobase, tmp;
         
-        IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __FUNCTION__ );       
+        IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __func__ );
         
         iobase = self->io.fir_base;
         
@@ -1756,7 +1756,7 @@ static int ali_ircc_dma_receive(struct ali_ircc_cb *self)
         //switch_bank(iobase, BANK0);
         tmp = inb(iobase+FIR_LCR_B);
         outb((unsigned char)(tmp &0x3f) | LCR_B_RX_MODE | LCR_B_BW , iobase + FIR_LCR_B); // 2000/12/1 05:16PM
-        IRDA_DEBUG(1, "%s(), *** Change To RX mode: FIR_LCR_B = 0x%x *** \n", __FUNCTION__ , inb(iobase+FIR_LCR_B));
+        IRDA_DEBUG(1, "%s(), *** Change To RX mode: FIR_LCR_B = 0x%x *** \n", __func__ , inb(iobase+FIR_LCR_B));
                         
         /* Set Rx Threshold */
         switch_bank(iobase, BANK1);
@@ -1768,7 +1768,7 @@ static int ali_ircc_dma_receive(struct ali_ircc_cb *self)
         outb(CR_DMA_EN | CR_DMA_BURST, iobase+FIR_CR);
                                 
         switch_bank(iobase, BANK0); 
-        IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ );       
+        IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ );
         return 0;
 }
 
@@ -1779,7 +1779,7 @@ static int  ali_ircc_dma_receive_complete(struct ali_ircc_cb *self)
         __u8 status, MessageCount;
         int len, i, iobase, val;        
 
-        IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __FUNCTION__ );       
+        IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __func__ );
 
         st_fifo = &self->st_fifo;               
         iobase = self->io.fir_base;     
@@ -1788,7 +1788,7 @@ static int  ali_ircc_dma_receive_complete(struct ali_ircc_cb *self)
         MessageCount = inb(iobase+ FIR_LSR)&0x07;
         
         if (MessageCount > 0)   
-                IRDA_DEBUG(0, "%s(), Messsage count = %d,\n", __FUNCTION__ , MessageCount);     
+                IRDA_DEBUG(0, "%s(), Messsage count = %d,\n", __func__ , MessageCount);
                 
         for (i=0; i<=MessageCount; i++)
         {
@@ -1801,11 +1801,11 @@ static int  ali_ircc_dma_receive_complete(struct ali_ircc_cb *self)
                 len = len << 8; 
                 len |= inb(iobase+FIR_RX_DSR_LO);
                 
-                IRDA_DEBUG(1, "%s(), RX Length = 0x%.2x,\n", __FUNCTION__ , len);       
-                IRDA_DEBUG(1, "%s(), RX Status = 0x%.2x,\n", __FUNCTION__ , status);
+                IRDA_DEBUG(1, "%s(), RX Length = 0x%.2x,\n", __func__ , len);
+                IRDA_DEBUG(1, "%s(), RX Status = 0x%.2x,\n", __func__ , status);
                 
                 if (st_fifo->tail >= MAX_RX_WINDOW) {
-                        IRDA_DEBUG(0, "%s(), window is full!\n", __FUNCTION__ );
+                        IRDA_DEBUG(0, "%s(), window is full!\n", __func__ );
                         continue;
                 }
                         
@@ -1828,7 +1828,7 @@ static int  ali_ircc_dma_receive_complete(struct ali_ircc_cb *self)
                 /* Check for errors */
                 if ((status & 0xd8) || self->rcvFramesOverflow || (len==0))             
                 {
-                        IRDA_DEBUG(0,"%s(), ************* RX Errors ************ \n", __FUNCTION__ );   
+                        IRDA_DEBUG(0,"%s(), ************* RX Errors ************ \n", __func__ );
                         
                         /* Skip frame */
                         self->stats.rx_errors++;
@@ -1838,29 +1838,29 @@ static int  ali_ircc_dma_receive_complete(struct ali_ircc_cb *self)
                         if (status & LSR_FIFO_UR) 
                         {
                                 self->stats.rx_frame_errors++;
-                                IRDA_DEBUG(0,"%s(), ************* FIFO Errors ************ \n", __FUNCTION__ );
+                                IRDA_DEBUG(0,"%s(), ************* FIFO Errors ************ \n", __func__ );
                         }       
                         if (status & LSR_FRAME_ERROR)
                         {
                                 self->stats.rx_frame_errors++;
-                                IRDA_DEBUG(0,"%s(), ************* FRAME Errors ************ \n", __FUNCTION__ );
+                                IRDA_DEBUG(0,"%s(), ************* FRAME Errors ************ \n", __func__ );
                         }
                                                         
                         if (status & LSR_CRC_ERROR) 
                         {
                                 self->stats.rx_crc_errors++;
-                                IRDA_DEBUG(0,"%s(), ************* CRC Errors ************ \n", __FUNCTION__ );
+                                IRDA_DEBUG(0,"%s(), ************* CRC Errors ************ \n", __func__ );
                         }
                         
                         if(self->rcvFramesOverflow)
                         {
                                 self->stats.rx_frame_errors++;
-                                IRDA_DEBUG(0,"%s(), ************* Overran DMA buffer ************ \n", __FUNCTION__ );                                                          
+                                IRDA_DEBUG(0,"%s(), ************* Overran DMA buffer ************ \n", __func__ );
                         }
                         if(len == 0)
                         {
                                 self->stats.rx_frame_errors++;
-                                IRDA_DEBUG(0,"%s(), ********** Receive Frame Size = 0 ********* \n", __FUNCTION__ );
+                                IRDA_DEBUG(0,"%s(), ********** Receive Frame Size = 0 ********* \n", __func__ );
                         }
                 }        
                 else 
@@ -1872,7 +1872,7 @@ static int  ali_ircc_dma_receive_complete(struct ali_ircc_cb *self)
                                 val = inb(iobase+FIR_BSR);      
                                 if ((val& BSR_FIFO_NOT_EMPTY)== 0x80) 
                                 {
-                                        IRDA_DEBUG(0, "%s(), ************* BSR_FIFO_NOT_EMPTY ************ \n", __FUNCTION__ );
+                                        IRDA_DEBUG(0, "%s(), ************* BSR_FIFO_NOT_EMPTY ************ \n", __func__ );
                                         
                                         /* Put this entry back in fifo */
                                         st_fifo->head--;
@@ -1909,7 +1909,7 @@ static int  ali_ircc_dma_receive_complete(struct ali_ircc_cb *self)
                         {
                                 IRDA_WARNING("%s(), memory squeeze, "
                                              "dropping frame.\n",
-                                             __FUNCTION__);
+                                             __func__);
                                 self->stats.rx_dropped++;
 
                                 return FALSE;
@@ -1937,7 +1937,7 @@ static int  ali_ircc_dma_receive_complete(struct ali_ircc_cb *self)
         
         switch_bank(iobase, BANK0);     
                 
-        IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ );       
+        IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ );
         return TRUE;
 }
 
@@ -1956,7 +1956,7 @@ static int ali_ircc_sir_hard_xmit(struct sk_buff *skb, struct net_device *dev)
         int iobase;
         __u32 speed;
         
-        IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
+        IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__ );
         
         IRDA_ASSERT(dev != NULL, return 0;);
         
@@ -2005,7 +2005,7 @@ static int ali_ircc_sir_hard_xmit(struct sk_buff *skb, struct net_device *dev)
 
         dev_kfree_skb(skb);
         
-        IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );       
+        IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
         
         return 0;       
 }
@@ -2024,7 +2024,7 @@ static int ali_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
         unsigned long flags;
         int ret = 0;
         
-        IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
+        IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__ );
         
         IRDA_ASSERT(dev != NULL, return -1;);
 
@@ -2032,11 +2032,11 @@ static int ali_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 
         IRDA_ASSERT(self != NULL, return -1;);
 
-        IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__ , dev->name, cmd);
+        IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __func__ , dev->name, cmd);
         
         switch (cmd) {
         case SIOCSBANDWIDTH: /* Set bandwidth */
-                IRDA_DEBUG(1, "%s(), SIOCSBANDWIDTH\n", __FUNCTION__ );
+                IRDA_DEBUG(1, "%s(), SIOCSBANDWIDTH\n", __func__ );
                 /*
                  * This function will also be used by IrLAP to change the
                  * speed, so we still must allow for speed change within
@@ -2050,13 +2050,13 @@ static int ali_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
                 spin_unlock_irqrestore(&self->lock, flags);
                 break;
         case SIOCSMEDIABUSY: /* Set media busy */
-                IRDA_DEBUG(1, "%s(), SIOCSMEDIABUSY\n", __FUNCTION__ );
+                IRDA_DEBUG(1, "%s(), SIOCSMEDIABUSY\n", __func__ );
                 if (!capable(CAP_NET_ADMIN))
                         return -EPERM;
                 irda_device_set_media_busy(self->netdev, TRUE);
                 break;
         case SIOCGRECEIVING: /* Check if we are receiving right now */
-                IRDA_DEBUG(2, "%s(), SIOCGRECEIVING\n", __FUNCTION__ );
+                IRDA_DEBUG(2, "%s(), SIOCGRECEIVING\n", __func__ );
                 /* This is protected */
                 irq->ifr_receiving = ali_ircc_is_receiving(self);
                 break;
@@ -2064,7 +2064,7 @@ static int ali_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
                 ret = -EOPNOTSUPP;
         }
         
-        IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );       
+        IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
         
         return ret;
 }
@@ -2081,7 +2081,7 @@ static int ali_ircc_is_receiving(struct ali_ircc_cb *self)
         int status = FALSE;
         int iobase;             
         
-        IRDA_DEBUG(2, "%s(), ---------------- Start -----------------\n", __FUNCTION__ );
+        IRDA_DEBUG(2, "%s(), ---------------- Start -----------------\n", __func__ );
         
         IRDA_ASSERT(self != NULL, return FALSE;);
 
@@ -2095,7 +2095,7 @@ static int ali_ircc_is_receiving(struct ali_ircc_cb *self)
                 if((inb(iobase+FIR_FIFO_FR) & 0x3f) != 0)               
                 {
                         /* We are receiving something */
-                        IRDA_DEBUG(1, "%s(), We are receiving something\n", __FUNCTION__ );
+                        IRDA_DEBUG(1, "%s(), We are receiving something\n", __func__ );
                         status = TRUE;
                 }
                 switch_bank(iobase, BANK0);             
@@ -2107,7 +2107,7 @@ static int ali_ircc_is_receiving(struct ali_ircc_cb *self)
         
         spin_unlock_irqrestore(&self->lock, flags);
         
-        IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
+        IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
         
         return status;
 }
@@ -2116,9 +2116,9 @@ static struct net_device_stats *ali_ircc_net_get_stats(struct net_device *dev)
 {
         struct ali_ircc_cb *self = (struct ali_ircc_cb *) dev->priv;
         
-        IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
+        IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__ );
                 
-        IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );       
+        IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
         
         return &self->stats;
 }
@@ -2164,7 +2164,7 @@ static void SetCOMInterrupts(struct ali_ircc_cb *self , unsigned char enable)
         
         int iobase = self->io.fir_base; /* or sir_base */
 
-        IRDA_DEBUG(2, "%s(), -------- Start -------- ( Enable = %d )\n", __FUNCTION__ , enable);        
+        IRDA_DEBUG(2, "%s(), -------- Start -------- ( Enable = %d )\n", __func__ , enable);
         
         /* Enable the interrupt which we wish to */
         if (enable){
@@ -2205,14 +2205,14 @@ static void SetCOMInterrupts(struct ali_ircc_cb *self , unsigned char enable)
         else
                 outb(newMask, iobase+UART_IER);
                 
-        IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );       
+        IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
 }
 
 static void SIR2FIR(int iobase)
 {
         //unsigned char tmp;
                 
-        IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
+        IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __func__ );
         
         /* Already protected (change_speed() or setup()), no need to lock.
          * Jean II */
@@ -2228,14 +2228,14 @@ static void SIR2FIR(int iobase)
         //tmp |= 0x20;
         //outb(tmp, iobase+FIR_LCR_B);  
         
-        IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ );       
+        IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ );
 }
 
 static void FIR2SIR(int iobase)
 {
         unsigned char val;
         
-        IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
+        IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __func__ );
         
         /* Already protected (change_speed() or setup()), no need to lock.
          * Jean II */
@@ -2251,7 +2251,7 @@ static void FIR2SIR(int iobase)
         val = inb(iobase+UART_LSR);
         val = inb(iobase+UART_MSR);
         
-        IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
+        IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ );
 }
 
 MODULE_AUTHOR("Benjamin Kong <benjamin_kong@ali.com.tw>");
diff --git a/drivers/net/irda/donauboe.c b/drivers/net/irda/donauboe.c
index 34ad189fff67..69d16b30323b 100644
--- a/drivers/net/irda/donauboe.c
+++ b/drivers/net/irda/donauboe.c
@@ -245,7 +245,7 @@ toshoboe_dumpregs (struct toshoboe_cb *self)
 {
   __u32 ringbase;
 
-  IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
+  IRDA_DEBUG (4, "%s()\n", __func__);
 
   ringbase = INB (OBOE_RING_BASE0) << 10;
   ringbase |= INB (OBOE_RING_BASE1) << 18;
@@ -293,7 +293,7 @@ static void
 toshoboe_disablebm (struct toshoboe_cb *self)
 {
   __u8 command;
-  IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
+  IRDA_DEBUG (4, "%s()\n", __func__);
 
   pci_read_config_byte (self->pdev, PCI_COMMAND, &command);
   command &= ~PCI_COMMAND_MASTER;
@@ -305,7 +305,7 @@ toshoboe_disablebm (struct toshoboe_cb *self)
 static void
 toshoboe_stopchip (struct toshoboe_cb *self)
 {
-  IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
+  IRDA_DEBUG (4, "%s()\n", __func__);
 
   /*Disable interrupts */
   OUTB (0x0, OBOE_IER);
@@ -350,7 +350,7 @@ toshoboe_setbaud (struct toshoboe_cb *self)
   __u16 pconfig = 0;
   __u8 config0l = 0;
 
-  IRDA_DEBUG (2, "%s(%d/%d)\n", __FUNCTION__, self->speed, self->io.speed);
+  IRDA_DEBUG (2, "%s(%d/%d)\n", __func__, self->speed, self->io.speed);
 
   switch (self->speed)
     {
@@ -482,7 +482,7 @@ toshoboe_setbaud (struct toshoboe_cb *self)
 static void
 toshoboe_enablebm (struct toshoboe_cb *self)
 {
-  IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
+  IRDA_DEBUG (4, "%s()\n", __func__);
   pci_set_master (self->pdev);
 }
 
@@ -492,7 +492,7 @@ toshoboe_initring (struct toshoboe_cb *self)
 {
   int i;
 
-  IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
+  IRDA_DEBUG (4, "%s()\n", __func__);
 
   for (i = 0; i < TX_SLOTS; ++i)
     {
@@ -550,7 +550,7 @@ toshoboe_startchip (struct toshoboe_cb *self)
 {
   __u32 physaddr;
 
-  IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
+  IRDA_DEBUG (4, "%s()\n", __func__);
 
   toshoboe_initring (self);
   toshoboe_enablebm (self);
@@ -824,7 +824,7 @@ toshoboe_probe (struct toshoboe_cb *self)
 #endif
   unsigned long flags;
 
-  IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
+  IRDA_DEBUG (4, "%s()\n", __func__);
 
   if (request_irq (self->io.irq, toshoboe_probeinterrupt,
                    self->io.irqflags, "toshoboe", (void *) self))
@@ -983,10 +983,10 @@ toshoboe_hard_xmit (struct sk_buff *skb, struct net_device *dev)
 
   IRDA_ASSERT (self != NULL, return 0; );
 
-  IRDA_DEBUG (1, "%s.tx:%x(%x)%x\n", __FUNCTION__
+  IRDA_DEBUG (1, "%s.tx:%x(%x)%x\n", __func__
       ,skb->len,self->txpending,INB (OBOE_ENABLEH));
   if (!cb->magic) {
-      IRDA_DEBUG (2, "%s.Not IrLAP:%x\n", __FUNCTION__, cb->magic);
+      IRDA_DEBUG (2, "%s.Not IrLAP:%x\n", __func__, cb->magic);
 #ifdef DUMP_PACKETS
       _dumpbufs(skb->data,skb->len,'>');
 #endif
@@ -1015,7 +1015,7 @@ toshoboe_hard_xmit (struct sk_buff *skb, struct net_device *dev)
         {
           self->new_speed = speed;
           IRDA_DEBUG (1, "%s: Queued TxDone scheduled speed change %d\n" ,
-                      __FUNCTION__, speed);
+                      __func__, speed);
           /* if no data, that's all! */
           if (!skb->len)
             {
@@ -1057,7 +1057,7 @@ toshoboe_hard_xmit (struct sk_buff *skb, struct net_device *dev)
       /* which we will add a wrong checksum to */
 
       mtt = toshoboe_makemttpacket (self, self->tx_bufs[self->txs], mtt);
-      IRDA_DEBUG (1, "%s.mtt:%x(%x)%d\n", __FUNCTION__
+      IRDA_DEBUG (1, "%s.mtt:%x(%x)%d\n", __func__
           ,skb->len,mtt,self->txpending);
       if (mtt)
         {
@@ -1101,7 +1101,7 @@ dumpbufs(skb->data,skb->len,'>');
 
   if (self->ring->tx[self->txs].control & OBOE_CTL_TX_HW_OWNS)
     {
-      IRDA_DEBUG (0, "%s.ful:%x(%x)%x\n", __FUNCTION__
+      IRDA_DEBUG (0, "%s.ful:%x(%x)%x\n", __func__
           ,skb->len, self->ring->tx[self->txs].control, self->txpending);
       toshoboe_start_DMA(self, OBOE_CONFIG0H_ENTX);
       spin_unlock_irqrestore(&self->spinlock, flags);
@@ -1179,7 +1179,7 @@ toshoboe_interrupt (int irq, void *dev_id)
           if (self->ring->tx[i].control & OBOE_CTL_TX_HW_OWNS)
               self->txpending++;
         }
-      IRDA_DEBUG (1, "%s.txd(%x)%x/%x\n", __FUNCTION__
+      IRDA_DEBUG (1, "%s.txd(%x)%x/%x\n", __func__
           ,irqstat,txp,self->txpending);
 
       txp = INB (OBOE_TXSLOT) & OBOE_SLOT_MASK;
@@ -1209,7 +1209,7 @@ toshoboe_interrupt (int irq, void *dev_id)
         {
           self->speed = self->new_speed;
           IRDA_DEBUG (1, "%s: Executed TxDone scheduled speed change %d\n",
-                      __FUNCTION__, self->speed);
+                      __func__, self->speed);
           toshoboe_setbaud (self);
         }
 
@@ -1224,7 +1224,7 @@ toshoboe_interrupt (int irq, void *dev_id)
         {
           int len = self->ring->rx[self->rxs].len;
           skb = NULL;
-          IRDA_DEBUG (3, "%s.rcv:%x(%x)\n", __FUNCTION__
+          IRDA_DEBUG (3, "%s.rcv:%x(%x)\n", __func__
                       ,len,self->ring->rx[self->rxs].control);
 
 #ifdef DUMP_PACKETS
@@ -1246,7 +1246,7 @@ dumpbufs(self->rx_bufs[self->rxs],len,'<');
                       len -= 2;
                   else
                       len = 0;
-                  IRDA_DEBUG (1, "%s.SIR:%x(%x)\n", __FUNCTION__, len,enable);
+                  IRDA_DEBUG (1, "%s.SIR:%x(%x)\n", __func__, len,enable);
                 }
 
 #ifdef USE_MIR
@@ -1256,7 +1256,7 @@ dumpbufs(self->rx_bufs[self->rxs],len,'<');
                       len -= 2;
                   else
                       len = 0;
-                  IRDA_DEBUG (2, "%s.MIR:%x(%x)\n", __FUNCTION__, len,enable);
+                  IRDA_DEBUG (2, "%s.MIR:%x(%x)\n", __func__, len,enable);
                 }
 #endif
               else if (enable & OBOE_ENABLEH_FIRON)
@@ -1265,10 +1265,10 @@ dumpbufs(self->rx_bufs[self->rxs],len,'<');
                       len -= 4;   /*FIXME: check this */
                   else
                       len = 0;
-                  IRDA_DEBUG (1, "%s.FIR:%x(%x)\n", __FUNCTION__, len,enable);
+                  IRDA_DEBUG (1, "%s.FIR:%x(%x)\n", __func__, len,enable);
                 }
               else
-                  IRDA_DEBUG (0, "%s.?IR:%x(%x)\n", __FUNCTION__, len,enable);
+                  IRDA_DEBUG (0, "%s.?IR:%x(%x)\n", __func__, len,enable);
 
               if (len)
                 {
@@ -1289,7 +1289,7 @@ dumpbufs(self->rx_bufs[self->rxs],len,'<');
                     {
                       printk (KERN_INFO
                               "%s(), memory squeeze, dropping frame.\n",
-                              __FUNCTION__);
+                              __func__);
                     }
                 }
             }
@@ -1301,7 +1301,7 @@ dumpbufs(self->rx_bufs[self->rxs],len,'<');
             /* (SIR) data is splitted in several slots. */
             /* we have to join all the received buffers received */
             /*in a large buffer before checking CRC. */
-            IRDA_DEBUG (0, "%s.err:%x(%x)\n", __FUNCTION__
+            IRDA_DEBUG (0, "%s.err:%x(%x)\n", __func__
                 ,len,self->ring->rx[self->rxs].control);
             }
 
@@ -1329,7 +1329,7 @@ dumpbufs(self->rx_bufs[self->rxs],len,'<');
   if (irqstat & OBOE_INT_SIP)
     {
       self->int_sip++;
-      IRDA_DEBUG (1, "%s.sip:%x(%x)%x\n", __FUNCTION__
+      IRDA_DEBUG (1, "%s.sip:%x(%x)%x\n", __func__
               ,self->int_sip,irqstat,self->txpending);
     }
   return IRQ_HANDLED;
@@ -1343,7 +1343,7 @@ toshoboe_net_open (struct net_device *dev)
   unsigned long flags;
   int rc;
 
-  IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
+  IRDA_DEBUG (4, "%s()\n", __func__);
 
   self = netdev_priv(dev);
 
@@ -1381,7 +1381,7 @@ toshoboe_net_close (struct net_device *dev)
 {
   struct toshoboe_cb *self;
 
-  IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
+  IRDA_DEBUG (4, "%s()\n", __func__);
 
   IRDA_ASSERT (dev != NULL, return -1; );
   self = (struct toshoboe_cb *) dev->priv;
@@ -1426,7 +1426,7 @@ toshoboe_net_ioctl (struct net_device *dev, struct ifreq *rq, int cmd)
 
   IRDA_ASSERT (self != NULL, return -1; );
 
-  IRDA_DEBUG (5, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__, dev->name, cmd);
+  IRDA_DEBUG (5, "%s(), %s, (cmd=0x%X)\n", __func__, dev->name, cmd);
 
   /* Disable interrupts & save flags */
   spin_lock_irqsave(&self->spinlock, flags);
@@ -1438,7 +1438,7 @@ toshoboe_net_ioctl (struct net_device *dev, struct ifreq *rq, int cmd)
        * speed, so we still must allow for speed change within
        * interrupt context.
        */
-      IRDA_DEBUG (1, "%s(BANDWIDTH), %s, (%X/%ld\n", __FUNCTION__
+      IRDA_DEBUG (1, "%s(BANDWIDTH), %s, (%X/%ld\n", __func__
           ,dev->name, INB (OBOE_STATUS), irq->ifr_baudrate );
       if (!in_interrupt () && !capable (CAP_NET_ADMIN)) {
         ret = -EPERM;
@@ -1451,7 +1451,7 @@ toshoboe_net_ioctl (struct net_device *dev, struct ifreq *rq, int cmd)
       self->new_speed = irq->ifr_baudrate;
       break;
     case SIOCSMEDIABUSY:       /* Set media busy */
-      IRDA_DEBUG (1, "%s(MEDIABUSY), %s, (%X/%x)\n", __FUNCTION__
+      IRDA_DEBUG (1, "%s(MEDIABUSY), %s, (%X/%x)\n", __func__
           ,dev->name, INB (OBOE_STATUS), capable (CAP_NET_ADMIN) );
       if (!capable (CAP_NET_ADMIN)) {
         ret = -EPERM;
@@ -1461,11 +1461,11 @@ toshoboe_net_ioctl (struct net_device *dev, struct ifreq *rq, int cmd)
       break;
     case SIOCGRECEIVING:       /* Check if we are receiving right now */
       irq->ifr_receiving = (INB (OBOE_STATUS) & OBOE_STATUS_RXBUSY) ? 1 : 0;
-      IRDA_DEBUG (3, "%s(RECEIVING), %s, (%X/%x)\n", __FUNCTION__
+      IRDA_DEBUG (3, "%s(RECEIVING), %s, (%X/%x)\n", __func__
           ,dev->name, INB (OBOE_STATUS), irq->ifr_receiving );
       break;
     default:
-      IRDA_DEBUG (1, "%s(?), %s, (cmd=0x%X)\n", __FUNCTION__, dev->name, cmd);
+      IRDA_DEBUG (1, "%s(?), %s, (cmd=0x%X)\n", __func__, dev->name, cmd);
       ret = -EOPNOTSUPP;
     }
 out:
@@ -1492,7 +1492,7 @@ toshoboe_close (struct pci_dev *pci_dev)
   int i;
   struct toshoboe_cb *self = (struct toshoboe_cb*)pci_get_drvdata(pci_dev);
 
-  IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
+  IRDA_DEBUG (4, "%s()\n", __func__);
 
   IRDA_ASSERT (self != NULL, return; );
 
@@ -1533,7 +1533,7 @@ toshoboe_open (struct pci_dev *pci_dev, const struct pci_device_id *pdid)
   int ok = 0;
   int err;
 
-  IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
+  IRDA_DEBUG (4, "%s()\n", __func__);
 
   if ((err=pci_enable_device(pci_dev)))
     return err;
@@ -1700,7 +1700,7 @@ toshoboe_gotosleep (struct pci_dev *pci_dev, pm_message_t crap)
   unsigned long flags;
   int i = 10;
 
-  IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
+  IRDA_DEBUG (4, "%s()\n", __func__);
 
   if (!self || self->stopped)
     return 0;
@@ -1728,7 +1728,7 @@ toshoboe_wakeup (struct pci_dev *pci_dev)
   struct toshoboe_cb *self = (struct toshoboe_cb*)pci_get_drvdata(pci_dev);
   unsigned long flags;
 
-  IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
+  IRDA_DEBUG (4, "%s()\n", __func__);
 
   if (!self || !self->stopped)
     return 0;
diff --git a/drivers/net/irda/girbil-sir.c b/drivers/net/irda/girbil-sir.c
index 738531b16bd3..a31b8fa8aaa9 100644
--- a/drivers/net/irda/girbil-sir.c
+++ b/drivers/net/irda/girbil-sir.c
@@ -86,7 +86,7 @@ static int girbil_open(struct sir_dev *dev)
 {
         struct qos_info *qos = &dev->qos;
 
-        IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+        IRDA_DEBUG(2, "%s()\n", __func__);
 
         /* Power on dongle */
         sirdev_set_dtr_rts(dev, TRUE, TRUE);
@@ -102,7 +102,7 @@ static int girbil_open(struct sir_dev *dev)
 
 static int girbil_close(struct sir_dev *dev)
 {
-        IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+        IRDA_DEBUG(2, "%s()\n", __func__);
 
         /* Power off dongle */
         sirdev_set_dtr_rts(dev, FALSE, FALSE);
@@ -126,7 +126,7 @@ static int girbil_change_speed(struct sir_dev *dev, unsigned speed)
         u8 control[2];
         static int ret = 0;
 
-        IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+        IRDA_DEBUG(2, "%s()\n", __func__);
 
         /* dongle alread reset - port and dongle at default speed */
 
@@ -179,7 +179,7 @@ static int girbil_change_speed(struct sir_dev *dev, unsigned speed)
                 break;
 
         default:
-                IRDA_ERROR("%s - undefined state %d\n", __FUNCTION__, state);
+                IRDA_ERROR("%s - undefined state %d\n", __func__, state);
                 ret = -EINVAL;
                 break;
         }
@@ -209,7 +209,7 @@ static int girbil_reset(struct sir_dev *dev)
         u8 control = GIRBIL_TXEN | GIRBIL_RXEN;
         int ret = 0;
 
-        IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+        IRDA_DEBUG(2, "%s()\n", __func__);
 
         switch (state) {
         case SIRDEV_STATE_DONGLE_RESET:
@@ -241,7 +241,7 @@ static int girbil_reset(struct sir_dev *dev)
                 break;
 
         default:
-                IRDA_ERROR("%s(), undefined state %d\n", __FUNCTION__, state);
+                IRDA_ERROR("%s(), undefined state %d\n", __func__, state);
                 ret = -1;
                 break;
         }
diff --git a/drivers/net/irda/irda-usb.c b/drivers/net/irda/irda-usb.c
index 18b471cd1447..b5d6b9ac162a 100644
--- a/drivers/net/irda/irda-usb.c
+++ b/drivers/net/irda/irda-usb.c
@@ -177,12 +177,12 @@ static void irda_usb_build_header(struct irda_usb_cb *self,
                     (!force) && (self->speed != -1)) {
                         /* No speed and xbofs change here
                          * (we'll do it later in the write callback) */
-                        IRDA_DEBUG(2, "%s(), not changing speed yet\n", __FUNCTION__);
+                        IRDA_DEBUG(2, "%s(), not changing speed yet\n", __func__);
                         *header = 0;
                         return;
                 }
 
-                IRDA_DEBUG(2, "%s(), changing speed to %d\n", __FUNCTION__, self->new_speed);
+                IRDA_DEBUG(2, "%s(), changing speed to %d\n", __func__, self->new_speed);
                 self->speed = self->new_speed;
                 /* We will do ` self->new_speed = -1; ' in the completion
                  * handler just in case the current URB fail - Jean II */
@@ -228,7 +228,7 @@ static void irda_usb_build_header(struct irda_usb_cb *self,
         
         /* Set the negotiated additional XBOFS */
         if (self->new_xbofs != -1) {
-                IRDA_DEBUG(2, "%s(), changing xbofs to %d\n", __FUNCTION__, self->new_xbofs);
+                IRDA_DEBUG(2, "%s(), changing xbofs to %d\n", __func__, self->new_xbofs);
                 self->xbofs = self->new_xbofs;
                 /* We will do ` self->new_xbofs = -1; ' in the completion
                  * handler just in case the current URB fail - Jean II */
@@ -302,13 +302,13 @@ static void irda_usb_change_speed_xbofs(struct irda_usb_cb *self)
         struct urb *urb;
         int ret;
 
-        IRDA_DEBUG(2, "%s(), speed=%d, xbofs=%d\n", __FUNCTION__,
+        IRDA_DEBUG(2, "%s(), speed=%d, xbofs=%d\n", __func__,
                    self->new_speed, self->new_xbofs);
 
         /* Grab the speed URB */
         urb = self->speed_urb;
         if (urb->status != 0) {
-                IRDA_WARNING("%s(), URB still in use!\n", __FUNCTION__);
+                IRDA_WARNING("%s(), URB still in use!\n", __func__);
                 return;
         }
 
@@ -334,7 +334,7 @@ static void irda_usb_change_speed_xbofs(struct irda_usb_cb *self)
 
         /* Irq disabled -> GFP_ATOMIC */
         if ((ret = usb_submit_urb(urb, GFP_ATOMIC))) {
-                IRDA_WARNING("%s(), failed Speed URB\n", __FUNCTION__);
+                IRDA_WARNING("%s(), failed Speed URB\n", __func__);
         }
 }
 
@@ -347,7 +347,7 @@ static void speed_bulk_callback(struct urb *urb)
 {
         struct irda_usb_cb *self = urb->context;
         
-        IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+        IRDA_DEBUG(2, "%s()\n", __func__);
 
         /* We should always have a context */
         IRDA_ASSERT(self != NULL, return;);
@@ -357,7 +357,7 @@ static void speed_bulk_callback(struct urb *urb)
         /* Check for timeout and other USB nasties */
         if (urb->status != 0) {
                 /* I get a lot of -ECONNABORTED = -103 here - Jean II */
-                IRDA_DEBUG(0, "%s(), URB complete status %d, transfer_flags 0x%04X\n", __FUNCTION__, urb->status, urb->transfer_flags);
+                IRDA_DEBUG(0, "%s(), URB complete status %d, transfer_flags 0x%04X\n", __func__, urb->status, urb->transfer_flags);
 
                 /* Don't do anything here, that might confuse the USB layer.
                  * Instead, we will wait for irda_usb_net_timeout(), the
@@ -392,7 +392,7 @@ static int irda_usb_hard_xmit(struct sk_buff *skb, struct net_device *netdev)
         int res, mtt;
         int     err = 1;        /* Failed */
 
-        IRDA_DEBUG(4, "%s() on %s\n", __FUNCTION__, netdev->name);
+        IRDA_DEBUG(4, "%s() on %s\n", __func__, netdev->name);
 
         netif_stop_queue(netdev);
 
@@ -403,7 +403,7 @@ static int irda_usb_hard_xmit(struct sk_buff *skb, struct net_device *netdev)
          * We need to check self->present under the spinlock because
          * of irda_usb_disconnect() is synchronous - Jean II */
         if (!self->present) {
-                IRDA_DEBUG(0, "%s(), Device is gone...\n", __FUNCTION__);
+                IRDA_DEBUG(0, "%s(), Device is gone...\n", __func__);
                 goto drop;
         }
 
@@ -437,7 +437,7 @@ static int irda_usb_hard_xmit(struct sk_buff *skb, struct net_device *netdev)
         }
 
         if (urb->status != 0) {
-                IRDA_WARNING("%s(), URB still in use!\n", __FUNCTION__);
+                IRDA_WARNING("%s(), URB still in use!\n", __func__);
                 goto drop;
         }
 
@@ -524,7 +524,7 @@ static int irda_usb_hard_xmit(struct sk_buff *skb, struct net_device *netdev)
         
         /* Ask USB to send the packet - Irq disabled -> GFP_ATOMIC */
         if ((res = usb_submit_urb(urb, GFP_ATOMIC))) {
-                IRDA_WARNING("%s(), failed Tx URB\n", __FUNCTION__);
+                IRDA_WARNING("%s(), failed Tx URB\n", __func__);
                 self->stats.tx_errors++;
                 /* Let USB recover : We will catch that in the watchdog */
                 /*netif_start_queue(netdev);*/
@@ -556,7 +556,7 @@ static void write_bulk_callback(struct urb *urb)
         struct sk_buff *skb = urb->context;
         struct irda_usb_cb *self = ((struct irda_skb_cb *) skb->cb)->context;
         
-        IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+        IRDA_DEBUG(2, "%s()\n", __func__);
 
         /* We should always have a context */
         IRDA_ASSERT(self != NULL, return;);
@@ -570,7 +570,7 @@ static void write_bulk_callback(struct urb *urb)
         /* Check for timeout and other USB nasties */
         if (urb->status != 0) {
                 /* I get a lot of -ECONNABORTED = -103 here - Jean II */
-                IRDA_DEBUG(0, "%s(), URB complete status %d, transfer_flags 0x%04X\n", __FUNCTION__, urb->status, urb->transfer_flags);
+                IRDA_DEBUG(0, "%s(), URB complete status %d, transfer_flags 0x%04X\n", __func__, urb->status, urb->transfer_flags);
 
                 /* Don't do anything here, that might confuse the USB layer,
                  * and we could go in recursion and blow the kernel stack...
@@ -589,7 +589,7 @@ static void write_bulk_callback(struct urb *urb)
 
         /* If the network is closed, stop everything */
         if ((!self->netopen) || (!self->present)) {
-                IRDA_DEBUG(0, "%s(), Network is gone...\n", __FUNCTION__);
+                IRDA_DEBUG(0, "%s(), Network is gone...\n", __func__);
                 spin_unlock_irqrestore(&self->lock, flags);
                 return;
         }
@@ -600,7 +600,7 @@ static void write_bulk_callback(struct urb *urb)
                     (self->new_xbofs != self->xbofs)) {
                         /* We haven't changed speed yet (because of
                          * IUC_SPEED_BUG), so do it now - Jean II */
-                        IRDA_DEBUG(1, "%s(), Changing speed now...\n", __FUNCTION__);
+                        IRDA_DEBUG(1, "%s(), Changing speed now...\n", __func__);
                         irda_usb_change_speed_xbofs(self);
                 } else {
                         /* New speed and xbof is now commited in hardware */
@@ -632,7 +632,7 @@ static void irda_usb_net_timeout(struct net_device *netdev)
         struct urb *urb;
         int     done = 0;       /* If we have made any progress */
 
-        IRDA_DEBUG(0, "%s(), Network layer thinks we timed out!\n", __FUNCTION__);
+        IRDA_DEBUG(0, "%s(), Network layer thinks we timed out!\n", __func__);
         IRDA_ASSERT(self != NULL, return;);
 
         /* Protect us from USB callbacks, net Tx and else. */
@@ -640,7 +640,7 @@ static void irda_usb_net_timeout(struct net_device *netdev)
 
         /* self->present *MUST* be read under spinlock */
         if (!self->present) {
-                IRDA_WARNING("%s(), device not present!\n", __FUNCTION__);
+                IRDA_WARNING("%s(), device not present!\n", __func__);
                 netif_stop_queue(netdev);
                 spin_unlock_irqrestore(&self->lock, flags);
                 return;
@@ -763,7 +763,7 @@ static void irda_usb_submit(struct irda_usb_cb *self, struct sk_buff *skb, struc
         struct irda_skb_cb *cb;
         int ret;
 
-        IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+        IRDA_DEBUG(2, "%s()\n", __func__);
 
         /* This should never happen */
         IRDA_ASSERT(skb != NULL, return;);
@@ -786,7 +786,7 @@ static void irda_usb_submit(struct irda_usb_cb *self, struct sk_buff *skb, struc
                 /* If this ever happen, we are in deep s***.
                  * Basically, the Rx path will stop... */
                 IRDA_WARNING("%s(), Failed to submit Rx URB %d\n",
-                             __FUNCTION__, ret);
+                             __func__, ret);
         }
 }
 
@@ -807,7 +807,7 @@ static void irda_usb_receive(struct urb *urb)
         struct urb *next_urb;
         unsigned int len, docopy;
 
-        IRDA_DEBUG(2, "%s(), len=%d\n", __FUNCTION__, urb->actual_length);
+        IRDA_DEBUG(2, "%s(), len=%d\n", __func__, urb->actual_length);
         
         /* Find ourselves */
         cb = (struct irda_skb_cb *) skb->cb;
@@ -817,7 +817,7 @@ static void irda_usb_receive(struct urb *urb)
 
         /* If the network is closed or the device gone, stop everything */
         if ((!self->netopen) || (!self->present)) {
-                IRDA_DEBUG(0, "%s(), Network is gone!\n", __FUNCTION__);
+                IRDA_DEBUG(0, "%s(), Network is gone!\n", __func__);
                 /* Don't re-submit the URB : will stall the Rx path */
                 return;
         }
@@ -840,7 +840,7 @@ static void irda_usb_receive(struct urb *urb)
                         /* Usually precursor to a hot-unplug on OHCI. */
                 default:
                         self->stats.rx_errors++;
-                        IRDA_DEBUG(0, "%s(), RX status %d, transfer_flags 0x%04X \n", __FUNCTION__, urb->status, urb->transfer_flags);
+                        IRDA_DEBUG(0, "%s(), RX status %d, transfer_flags 0x%04X \n", __func__, urb->status, urb->transfer_flags);
                         break;
                 }
                 /* If we received an error, we don't want to resubmit the
@@ -861,7 +861,7 @@ static void irda_usb_receive(struct urb *urb)
         
         /* Check for empty frames */
         if (urb->actual_length <= self->header_length) {
-                IRDA_WARNING("%s(), empty frame!\n", __FUNCTION__);
+                IRDA_WARNING("%s(), empty frame!\n", __func__);
                 goto done;
         }
 
@@ -967,7 +967,7 @@ static void irda_usb_rx_defer_expired(unsigned long data)
         struct irda_skb_cb *cb;
         struct urb *next_urb;
 
-        IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+        IRDA_DEBUG(2, "%s()\n", __func__);
 
         /* Find ourselves */
         cb = (struct irda_skb_cb *) skb->cb;
@@ -1053,7 +1053,7 @@ static int stir421x_fw_upload(struct irda_usb_cb *self,
                                    patch_block, block_size,
                                    &actual_len, msecs_to_jiffies(500));
                 IRDA_DEBUG(3,"%s(): Bulk send %u bytes, ret=%d\n",
-                           __FUNCTION__, actual_len, ret);
+                           __func__, actual_len, ret);
 
                 if (ret < 0)
                         break;
@@ -1092,7 +1092,7 @@ static int stir421x_patch_device(struct irda_usb_cb *self)
 
         /* We get a patch from userspace */
         IRDA_MESSAGE("%s(): Received firmware %s (%zu bytes)\n",
-                     __FUNCTION__, stir421x_fw_name, fw->size);
+                     __func__, stir421x_fw_name, fw->size);
 
         ret = -EINVAL;
 
@@ -1116,7 +1116,7 @@ static int stir421x_patch_device(struct irda_usb_cb *self)
                                 + (build % 10);
 
                         IRDA_DEBUG(3, "%s(): Firmware Product version %ld\n",
-                                   __FUNCTION__, fw_version);
+                                   __func__, fw_version);
                 }
         }
 
@@ -1172,7 +1172,7 @@ static int irda_usb_net_open(struct net_device *netdev)
         char    hwname[16];
         int i;
         
-        IRDA_DEBUG(1, "%s()\n", __FUNCTION__);
+        IRDA_DEBUG(1, "%s()\n", __func__);
 
         IRDA_ASSERT(netdev != NULL, return -1;);
         self = (struct irda_usb_cb *) netdev->priv;
@@ -1182,13 +1182,13 @@ static int irda_usb_net_open(struct net_device *netdev)
         /* Can only open the device if it's there */
         if(!self->present) {
                 spin_unlock_irqrestore(&self->lock, flags);
-                IRDA_WARNING("%s(), device not present!\n", __FUNCTION__);
+                IRDA_WARNING("%s(), device not present!\n", __func__);
                 return -1;
         }
 
         if(self->needspatch) {
                 spin_unlock_irqrestore(&self->lock, flags);
-                IRDA_WARNING("%s(), device needs patch\n", __FUNCTION__) ;
+                IRDA_WARNING("%s(), device needs patch\n", __func__) ;
                 return -EIO ;
         }
 
@@ -1231,7 +1231,7 @@ static int irda_usb_net_open(struct net_device *netdev)
                         /* If this ever happen, we are in deep s***.
                          * Basically, we can't start the Rx path... */
                         IRDA_WARNING("%s(), Failed to allocate Rx skb\n",
-                                     __FUNCTION__);
+                                     __func__);
                         return -1;
                 }
                 //skb_reserve(newskb, USB_IRDA_HEADER - 1);
@@ -1254,7 +1254,7 @@ static int irda_usb_net_close(struct net_device *netdev)
         struct irda_usb_cb *self;
         int     i;
 
-        IRDA_DEBUG(1, "%s()\n", __FUNCTION__);
+        IRDA_DEBUG(1, "%s()\n", __func__);
 
         IRDA_ASSERT(netdev != NULL, return -1;);
         self = (struct irda_usb_cb *) netdev->priv;
@@ -1309,7 +1309,7 @@ static int irda_usb_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
         self = dev->priv;
         IRDA_ASSERT(self != NULL, return -1;);
 
-        IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__, dev->name, cmd);
+        IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __func__, dev->name, cmd);
 
         switch (cmd) {
         case SIOCSBANDWIDTH: /* Set bandwidth */
@@ -1367,7 +1367,7 @@ static inline void irda_usb_init_qos(struct irda_usb_cb *self)
 {
         struct irda_class_desc *desc;
 
-        IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
+        IRDA_DEBUG(3, "%s()\n", __func__);
         
         desc = self->irda_desc;
         
@@ -1384,7 +1384,7 @@ static inline void irda_usb_init_qos(struct irda_usb_cb *self)
         self->qos.data_size.bits       = desc->bmDataSize;
 
         IRDA_DEBUG(0, "%s(), dongle says speed=0x%X, size=0x%X, window=0x%X, bofs=0x%X, turn=0x%X\n", 
-                __FUNCTION__, self->qos.baud_rate.bits, self->qos.data_size.bits, self->qos.window_size.bits, self->qos.additional_bofs.bits, self->qos.min_turn_time.bits);
+                __func__, self->qos.baud_rate.bits, self->qos.data_size.bits, self->qos.window_size.bits, self->qos.additional_bofs.bits, self->qos.min_turn_time.bits);
 
         /* Don't always trust what the dongle tell us */
         if(self->capability & IUC_SIR_ONLY)
@@ -1419,7 +1419,7 @@ static inline int irda_usb_open(struct irda_usb_cb *self)
 {
         struct net_device *netdev = self->netdev;
 
-        IRDA_DEBUG(1, "%s()\n", __FUNCTION__);
+        IRDA_DEBUG(1, "%s()\n", __func__);
 
         irda_usb_init_qos(self);
 
@@ -1442,7 +1442,7 @@ static inline int irda_usb_open(struct irda_usb_cb *self)
  */
 static inline void irda_usb_close(struct irda_usb_cb *self)
 {
-        IRDA_DEBUG(1, "%s()\n", __FUNCTION__);
+        IRDA_DEBUG(1, "%s()\n", __func__);
 
         /* Remove netdevice */
         unregister_netdev(self->netdev);
@@ -1515,13 +1515,13 @@ static inline int irda_usb_parse_endpoints(struct irda_usb_cb *self, struct usb_
                                 /* This is our interrupt endpoint */
                                 self->bulk_int_ep = ep;
                         } else {
-                                IRDA_ERROR("%s(), Unrecognised endpoint %02X.\n", __FUNCTION__, ep);
+                                IRDA_ERROR("%s(), Unrecognised endpoint %02X.\n", __func__, ep);
                         }
                 }
         }
 
         IRDA_DEBUG(0, "%s(), And our endpoints are : in=%02X, out=%02X (%d), int=%02X\n",
-                __FUNCTION__, self->bulk_in_ep, self->bulk_out_ep, self->bulk_out_mtu, self->bulk_int_ep);
+                __func__, self->bulk_in_ep, self->bulk_out_ep, self->bulk_out_mtu, self->bulk_int_ep);
 
         return((self->bulk_in_ep != 0) && (self->bulk_out_ep != 0));
 }
@@ -1583,7 +1583,7 @@ static inline struct irda_class_desc *irda_usb_find_class_desc(struct usb_interf
                 0, intf->altsetting->desc.bInterfaceNumber, desc,
                 sizeof(*desc), 500);
         
-        IRDA_DEBUG(1, "%s(), ret=%d\n", __FUNCTION__, ret);
+        IRDA_DEBUG(1, "%s(), ret=%d\n", __func__, ret);
         if (ret < sizeof(*desc)) {
                 IRDA_WARNING("usb-irda: class_descriptor read %s (%d)\n",
                              (ret<0) ? "failed" : "too short", ret);
@@ -1696,10 +1696,10 @@ static int irda_usb_probe(struct usb_interface *intf,
                         /* Martin Diehl says if we get a -EPIPE we should
                          * be fine and we don't need to do a usb_clear_halt().
                          * - Jean II */
-                        IRDA_DEBUG(0, "%s(), Received -EPIPE, ignoring...\n", __FUNCTION__);
+                        IRDA_DEBUG(0, "%s(), Received -EPIPE, ignoring...\n", __func__);
                         break;
                 default:
-                        IRDA_DEBUG(0, "%s(), Unknown error %d\n", __FUNCTION__, ret);
+                        IRDA_DEBUG(0, "%s(), Unknown error %d\n", __func__, ret);
                         ret = -EIO;
                         goto err_out_3;
         }
@@ -1708,7 +1708,7 @@ static int irda_usb_probe(struct usb_interface *intf,
         interface = intf->cur_altsetting;
         if(!irda_usb_parse_endpoints(self, interface->endpoint,
                                      interface->desc.bNumEndpoints)) {
-                IRDA_ERROR("%s(), Bogus endpoints...\n", __FUNCTION__);
+                IRDA_ERROR("%s(), Bogus endpoints...\n", __func__);
                 ret = -EIO;
                 goto err_out_3;
         }
@@ -1815,7 +1815,7 @@ static void irda_usb_disconnect(struct usb_interface *intf)
         struct irda_usb_cb *self = usb_get_intfdata(intf);
         int i;
 
-        IRDA_DEBUG(1, "%s()\n", __FUNCTION__);
+        IRDA_DEBUG(1, "%s()\n", __func__);
 
         usb_set_intfdata(intf, NULL);
         if (!self)
@@ -1865,7 +1865,7 @@ static void irda_usb_disconnect(struct usb_interface *intf)
 
         /* Free self and network device */
         free_netdev(self->netdev);
-        IRDA_DEBUG(0, "%s(), USB IrDA Disconnected\n", __FUNCTION__);
+        IRDA_DEBUG(0, "%s(), USB IrDA Disconnected\n", __func__);
 }
 
 /*------------------------------------------------------------------*/
diff --git a/drivers/net/irda/irtty-sir.c b/drivers/net/irda/irtty-sir.c
index 9e33196f9459..6bcee01c684c 100644
--- a/drivers/net/irda/irtty-sir.c
+++ b/drivers/net/irda/irtty-sir.c
@@ -231,7 +231,7 @@ static void irtty_receive_buf(struct tty_struct *tty, const unsigned char *cp,
 
         dev = priv->dev;
         if (!dev) {
-                IRDA_WARNING("%s(), not ready yet!\n", __FUNCTION__);
+                IRDA_WARNING("%s(), not ready yet!\n", __func__);
                 return;
         }
 
@@ -388,7 +388,7 @@ static int irtty_ioctl(struct tty_struct *tty, struct file *file, unsigned int c
         IRDA_ASSERT(priv != NULL, return -ENODEV;);
         IRDA_ASSERT(priv->magic == IRTTY_MAGIC, return -EBADR;);
 
-        IRDA_DEBUG(3, "%s(cmd=0x%X)\n", __FUNCTION__, cmd);
+        IRDA_DEBUG(3, "%s(cmd=0x%X)\n", __func__, cmd);
 
         dev = priv->dev;
         IRDA_ASSERT(dev != NULL, return -1;);
@@ -476,7 +476,7 @@ static int irtty_open(struct tty_struct *tty)
 
         mutex_unlock(&irtty_mutex);
 
-        IRDA_DEBUG(0, "%s - %s: irda line discipline opened\n", __FUNCTION__, tty->name);
+        IRDA_DEBUG(0, "%s - %s: irda line discipline opened\n", __func__, tty->name);
 
         return 0;
 
@@ -528,7 +528,7 @@ static void irtty_close(struct tty_struct *tty)
 
         kfree(priv);
 
-        IRDA_DEBUG(0, "%s - %s: irda line discipline closed\n", __FUNCTION__, tty->name);
+        IRDA_DEBUG(0, "%s - %s: irda line discipline closed\n", __func__, tty->name);
 }
 
 /* ------------------------------------------------------- */
@@ -566,7 +566,7 @@ static void __exit irtty_sir_cleanup(void)
 
         if ((err = tty_unregister_ldisc(N_IRDA))) {
                 IRDA_ERROR("%s(), can't unregister line discipline (err = %d)\n",
-                           __FUNCTION__, err);
+                           __func__, err);
         }
 }
 
diff --git a/drivers/net/irda/kingsun-sir.c b/drivers/net/irda/kingsun-sir.c
index 648e54b3f00e..73fe83be34fe 100644
--- a/drivers/net/irda/kingsun-sir.c
+++ b/drivers/net/irda/kingsun-sir.c
@@ -243,7 +243,7 @@ static void kingsun_rcv_irq(struct urb *urb)
                 }
         } else if (urb->actual_length > 0) {
                 err("%s(): Unexpected response length, expected %d got %d",
-                    __FUNCTION__, kingsun->max_rx, urb->actual_length);
+                    __func__, kingsun->max_rx, urb->actual_length);
         }
         /* This urb has already been filled in kingsun_net_open */
         ret = usb_submit_urb(urb, GFP_ATOMIC);
diff --git a/drivers/net/irda/litelink-sir.c b/drivers/net/irda/litelink-sir.c
index 73261c54bbfd..d6d9d2e5ad49 100644
--- a/drivers/net/irda/litelink-sir.c
+++ b/drivers/net/irda/litelink-sir.c
@@ -78,7 +78,7 @@ static int litelink_open(struct sir_dev *dev)
 {
         struct qos_info *qos = &dev->qos;
 
-        IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+        IRDA_DEBUG(2, "%s()\n", __func__);
 
         /* Power up dongle */
         sirdev_set_dtr_rts(dev, TRUE, TRUE);
@@ -95,7 +95,7 @@ static int litelink_open(struct sir_dev *dev)
 
 static int litelink_close(struct sir_dev *dev)
 {
-        IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+        IRDA_DEBUG(2, "%s()\n", __func__);
 
         /* Power off dongle */
         sirdev_set_dtr_rts(dev, FALSE, FALSE);
@@ -113,7 +113,7 @@ static int litelink_change_speed(struct sir_dev *dev, unsigned speed)
 {
         int i;
 
-        IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+        IRDA_DEBUG(2, "%s()\n", __func__);
 
         /* dongle already reset by irda-thread - current speed (dongle and
          * port) is the default speed (115200 for litelink!)
@@ -156,7 +156,7 @@ static int litelink_change_speed(struct sir_dev *dev, unsigned speed)
  */
 static int litelink_reset(struct sir_dev *dev)
 {
-        IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+        IRDA_DEBUG(2, "%s()\n", __func__);
 
         /* probably the power-up can be dropped here, but with only
          * 15 usec delay it's not worth the risk unless somebody with
diff --git a/drivers/net/irda/ma600-sir.c b/drivers/net/irda/ma600-sir.c
index 809906d94762..1ceed9cfb7c4 100644
--- a/drivers/net/irda/ma600-sir.c
+++ b/drivers/net/irda/ma600-sir.c
@@ -67,13 +67,13 @@ static struct dongle_driver ma600 = {
 
 static int __init ma600_sir_init(void)
 {
-        IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+        IRDA_DEBUG(2, "%s()\n", __func__);
         return irda_register_dongle(&ma600);
 }
 
 static void __exit ma600_sir_cleanup(void)
 {
-        IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+        IRDA_DEBUG(2, "%s()\n", __func__);
         irda_unregister_dongle(&ma600);
 }
 
@@ -88,7 +88,7 @@ static int ma600_open(struct sir_dev *dev)
 {
         struct qos_info *qos = &dev->qos;
 
-        IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+        IRDA_DEBUG(2, "%s()\n", __func__);
 
         sirdev_set_dtr_rts(dev, TRUE, TRUE);
 
@@ -106,7 +106,7 @@ static int ma600_open(struct sir_dev *dev)
 
 static int ma600_close(struct sir_dev *dev)
 {
-        IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+        IRDA_DEBUG(2, "%s()\n", __func__);
 
         /* Power off dongle */
         sirdev_set_dtr_rts(dev, FALSE, FALSE);
@@ -176,7 +176,7 @@ static int ma600_change_speed(struct sir_dev *dev, unsigned speed)
 {
         u8      byte;
         
-        IRDA_DEBUG(2, "%s(), speed=%d (was %d)\n", __FUNCTION__,
+        IRDA_DEBUG(2, "%s(), speed=%d (was %d)\n", __func__,
                 speed, dev->speed);
 
         /* dongle already reset, dongle and port at default speed (9600) */
@@ -201,12 +201,12 @@ static int ma600_change_speed(struct sir_dev *dev, unsigned speed)
         sirdev_raw_read(dev, &byte, sizeof(byte));
         if (byte != get_control_byte(speed))  {
                 IRDA_WARNING("%s(): bad control byte read-back %02x != %02x\n",
-                             __FUNCTION__, (unsigned) byte,
+                             __func__, (unsigned) byte,
                              (unsigned) get_control_byte(speed));
                 return -1;
         }
         else
-                IRDA_DEBUG(2, "%s() control byte write read OK\n", __FUNCTION__);
+                IRDA_DEBUG(2, "%s() control byte write read OK\n", __func__);
 #endif
 
         /* Set DTR, Set RTS */
@@ -238,7 +238,7 @@ static int ma600_change_speed(struct sir_dev *dev, unsigned speed)
 
 int ma600_reset(struct sir_dev *dev)
 {
-        IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+        IRDA_DEBUG(2, "%s()\n", __func__);
 
         /* Reset the dongle : set DTR low for 10 ms */
         sirdev_set_dtr_rts(dev, FALSE, TRUE);
diff --git a/drivers/net/irda/mcp2120-sir.c b/drivers/net/irda/mcp2120-sir.c
index 67bd016e4df8..5e2f4859cee7 100644
--- a/drivers/net/irda/mcp2120-sir.c
+++ b/drivers/net/irda/mcp2120-sir.c
@@ -63,7 +63,7 @@ static int mcp2120_open(struct sir_dev *dev)
 {
         struct qos_info *qos = &dev->qos;
 
-        IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+        IRDA_DEBUG(2, "%s()\n", __func__);
 
         /* seems no explicit power-on required here and reset switching it on anyway */
 
@@ -76,7 +76,7 @@ static int mcp2120_open(struct sir_dev *dev)
 
 static int mcp2120_close(struct sir_dev *dev)
 {
-        IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+        IRDA_DEBUG(2, "%s()\n", __func__);
 
         /* Power off dongle */
         /* reset and inhibit mcp2120 */
@@ -102,7 +102,7 @@ static int mcp2120_change_speed(struct sir_dev *dev, unsigned speed)
         u8 control[2];
         static int ret = 0;
 
-        IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+        IRDA_DEBUG(2, "%s()\n", __func__);
 
         switch (state) {
         case SIRDEV_STATE_DONGLE_SPEED:
@@ -155,7 +155,7 @@ static int mcp2120_change_speed(struct sir_dev *dev, unsigned speed)
                 break;
 
         default:
-                IRDA_ERROR("%s(), undefine state %d\n", __FUNCTION__, state);
+                IRDA_ERROR("%s(), undefine state %d\n", __func__, state);
                 ret = -EINVAL;
                 break;
         }
@@ -187,7 +187,7 @@ static int mcp2120_reset(struct sir_dev *dev)
         unsigned delay = 0;
         int ret = 0;
 
-        IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+        IRDA_DEBUG(2, "%s()\n", __func__);
 
         switch (state) {
         case SIRDEV_STATE_DONGLE_RESET:
@@ -213,7 +213,7 @@ static int mcp2120_reset(struct sir_dev *dev)
                 break;
 
         default:
-                IRDA_ERROR("%s(), undefined state %d\n", __FUNCTION__, state);
+                IRDA_ERROR("%s(), undefined state %d\n", __func__, state);
                 ret = -EINVAL;
                 break;
         }
diff --git a/drivers/net/irda/nsc-ircc.c b/drivers/net/irda/nsc-ircc.c
index effc1ce8179a..8583d951a6ad 100644
--- a/drivers/net/irda/nsc-ircc.c
+++ b/drivers/net/irda/nsc-ircc.c
@@ -151,8 +151,8 @@ static char *dongle_types[] = {
 static chipio_t pnp_info;
 static const struct pnp_device_id nsc_ircc_pnp_table[] = {
         { .id = "NSC6001", .driver_data = 0 },
-        { .id = "IBM0071", .driver_data = 0 },
         { .id = "HWPC224", .driver_data = 0 },
+        { .id = "IBM0071", .driver_data = NSC_FORCE_DONGLE_TYPE9 },
         { }
 };
 
@@ -223,7 +223,7 @@ static int __init nsc_ircc_init(void)
 
         /* Probe for all the NSC chipsets we know about */
         for (chip = chips; chip->name ; chip++) {
-                IRDA_DEBUG(2, "%s(), Probing for %s ...\n", __FUNCTION__,
+                IRDA_DEBUG(2, "%s(), Probing for %s ...\n", __func__,
                            chip->name);
                 
                 /* Try all config registers for this chip */
@@ -235,7 +235,7 @@ static int __init nsc_ircc_init(void)
                         /* Read index register */
                         reg = inb(cfg_base);
                         if (reg == 0xff) {
-                                IRDA_DEBUG(2, "%s() no chip at 0x%03x\n", __FUNCTION__, cfg_base);
+                                IRDA_DEBUG(2, "%s() no chip at 0x%03x\n", __func__, cfg_base);
                                 continue;
                         }
                         
@@ -244,7 +244,7 @@ static int __init nsc_ircc_init(void)
                         id = inb(cfg_base+1);
                         if ((id & chip->cid_mask) == chip->cid_value) {
                                 IRDA_DEBUG(2, "%s() Found %s chip, revision=%d\n",
-                                           __FUNCTION__, chip->name, id & ~chip->cid_mask);
+                                           __func__, chip->name, id & ~chip->cid_mask);
 
                                 /*
                                  * If we found a correct PnP setting,
@@ -295,7 +295,7 @@ static int __init nsc_ircc_init(void)
                                 }
                                 i++;
                         } else {
-                                IRDA_DEBUG(2, "%s(), Wrong chip id=0x%02x\n", __FUNCTION__, id);
+                                IRDA_DEBUG(2, "%s(), Wrong chip id=0x%02x\n", __func__, id);
                         }
                 } 
         }
@@ -345,7 +345,7 @@ static int __init nsc_ircc_open(chipio_t *info)
         void *ret;
         int err, chip_index;
 
-        IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+        IRDA_DEBUG(2, "%s()\n", __func__);
 
 
         for (chip_index = 0; chip_index < ARRAY_SIZE(dev_self); chip_index++) {
@@ -354,7 +354,7 @@ static int __init nsc_ircc_open(chipio_t *info)
         }
 
         if (chip_index == ARRAY_SIZE(dev_self)) {
-                IRDA_ERROR("%s(), maximum number of supported chips reached!\n", __FUNCTION__);
+                IRDA_ERROR("%s(), maximum number of supported chips reached!\n", __func__);
                 return -ENOMEM;
         }
 
@@ -369,7 +369,7 @@ static int __init nsc_ircc_open(chipio_t *info)
         dev = alloc_irdadev(sizeof(struct nsc_ircc_cb));
         if (dev == NULL) {
                 IRDA_ERROR("%s(), can't allocate memory for "
-                           "control block!\n", __FUNCTION__);
+                           "control block!\n", __func__);
                 return -ENOMEM;
         }
 
@@ -393,7 +393,7 @@ static int __init nsc_ircc_open(chipio_t *info)
         ret = request_region(self->io.fir_base, self->io.fir_ext, driver_name);
         if (!ret) {
                 IRDA_WARNING("%s(), can't get iobase of 0x%03x\n",
-                             __FUNCTION__, self->io.fir_base);
+                             __func__, self->io.fir_base);
                 err = -ENODEV;
                 goto out1;
         }
@@ -450,7 +450,7 @@ static int __init nsc_ircc_open(chipio_t *info)
 
         err = register_netdev(dev);
         if (err) {
-                IRDA_ERROR("%s(), register_netdev() failed!\n", __FUNCTION__);
+                IRDA_ERROR("%s(), register_netdev() failed!\n", __func__);
                 goto out4;
         }
         IRDA_MESSAGE("IrDA: Registered device %s\n", dev->name);
@@ -506,7 +506,7 @@ static int __exit nsc_ircc_close(struct nsc_ircc_cb *self)
 {
         int iobase;
 
-        IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+        IRDA_DEBUG(4, "%s()\n", __func__);
 
         IRDA_ASSERT(self != NULL, return -1;);
 
@@ -519,7 +519,7 @@ static int __exit nsc_ircc_close(struct nsc_ircc_cb *self)
 
         /* Release the PORT that this driver is using */
         IRDA_DEBUG(4, "%s(), Releasing Region %03x\n", 
-                   __FUNCTION__, self->io.fir_base);
+                   __func__, self->io.fir_base);
         release_region(self->io.fir_base, self->io.fir_ext);
 
         if (self->tx_buff.head)
@@ -557,7 +557,7 @@ static int nsc_ircc_init_108(nsc_chip_t *chip, chipio_t *info)
         case 0x2e8: outb(0x15, cfg_base+1); break;
         case 0x3f8: outb(0x16, cfg_base+1); break;
         case 0x2f8: outb(0x17, cfg_base+1); break;
-        default: IRDA_ERROR("%s(), invalid base_address", __FUNCTION__);
+        default: IRDA_ERROR("%s(), invalid base_address", __func__);
         }
         
         /* Control Signal Routing Register (CSRT) */
@@ -569,7 +569,7 @@ static int nsc_ircc_init_108(nsc_chip_t *chip, chipio_t *info)
         case 9:  temp = 0x05; break;
         case 11: temp = 0x06; break;
         case 15: temp = 0x07; break;
-        default: IRDA_ERROR("%s(), invalid irq", __FUNCTION__);
+        default: IRDA_ERROR("%s(), invalid irq", __func__);
         }
         outb(CFG_108_CSRT, cfg_base);
         
@@ -577,7 +577,7 @@ static int nsc_ircc_init_108(nsc_chip_t *chip, chipio_t *info)
         case 0: outb(0x08+temp, cfg_base+1); break;
         case 1: outb(0x10+temp, cfg_base+1); break;
         case 3: outb(0x18+temp, cfg_base+1); break;
-        default: IRDA_ERROR("%s(), invalid dma", __FUNCTION__);
+        default: IRDA_ERROR("%s(), invalid dma", __func__);
         }
         
         outb(CFG_108_MCTL, cfg_base);      /* Mode Control Register (MCTL) */
@@ -616,7 +616,7 @@ static int nsc_ircc_probe_108(nsc_chip_t *chip, chipio_t *info)
                 break;
         }
         info->sir_base = info->fir_base;
-        IRDA_DEBUG(2, "%s(), probing fir_base=0x%03x\n", __FUNCTION__,
+        IRDA_DEBUG(2, "%s(), probing fir_base=0x%03x\n", __func__,
                    info->fir_base);
 
         /* Read control signals routing register (CSRT) */
@@ -649,7 +649,7 @@ static int nsc_ircc_probe_108(nsc_chip_t *chip, chipio_t *info)
                 info->irq = 15;
                 break;
         }
-        IRDA_DEBUG(2, "%s(), probing irq=%d\n", __FUNCTION__, info->irq);
+        IRDA_DEBUG(2, "%s(), probing irq=%d\n", __func__, info->irq);
 
         /* Currently we only read Rx DMA but it will also be used for Tx */
         switch ((reg >> 3) & 0x03) {
@@ -666,7 +666,7 @@ static int nsc_ircc_probe_108(nsc_chip_t *chip, chipio_t *info)
                 info->dma = 3;
                 break;
         }
-        IRDA_DEBUG(2, "%s(), probing dma=%d\n", __FUNCTION__, info->dma);
+        IRDA_DEBUG(2, "%s(), probing dma=%d\n", __func__, info->dma);
 
         /* Read mode control register (MCTL) */
         outb(CFG_108_MCTL, cfg_base);
@@ -823,7 +823,7 @@ static int nsc_ircc_init_39x(nsc_chip_t *chip, chipio_t *info)
         /* User is sure about his config... accept it. */
         IRDA_DEBUG(2, "%s(): nsc_ircc_init_39x (user settings): "
                    "io=0x%04x, irq=%d, dma=%d\n", 
-                   __FUNCTION__, info->fir_base, info->irq, info->dma);
+                   __func__, info->fir_base, info->irq, info->dma);
 
         /* Access bank for SP2 */
         outb(CFG_39X_LDN, cfg_base);
@@ -864,7 +864,7 @@ static int nsc_ircc_probe_39x(nsc_chip_t *chip, chipio_t *info)
         int enabled, susp;
 
         IRDA_DEBUG(2, "%s(), nsc_ircc_probe_39x, base=%d\n",
-                   __FUNCTION__, cfg_base);
+                   __func__, cfg_base);
 
         /* This function should be executed with irq off to avoid
          * another driver messing with the Super I/O bank - Jean II */
@@ -898,7 +898,7 @@ static int nsc_ircc_probe_39x(nsc_chip_t *chip, chipio_t *info)
         outb(CFG_39X_SPC, cfg_base);
         susp = 1 - ((inb(cfg_base+1) & 0x02) >> 1);
 
-        IRDA_DEBUG(2, "%s(): io=0x%02x%02x, irq=%d (type %d), rxdma=%d, txdma=%d, enabled=%d (suspended=%d)\n", __FUNCTION__, reg1,reg2,irq,irqt,dma1,dma2,enabled,susp);
+        IRDA_DEBUG(2, "%s(): io=0x%02x%02x, irq=%d (type %d), rxdma=%d, txdma=%d, enabled=%d (suspended=%d)\n", __func__, reg1,reg2,irq,irqt,dma1,dma2,enabled,susp);
 
         /* Configure SP2 */
 
@@ -930,7 +930,10 @@ static int nsc_ircc_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *i
         pnp_info.dma = -1;
         pnp_succeeded = 1;
 
-        /* There don't seem to be any way to get the cfg_base.
+        if (id->driver_data & NSC_FORCE_DONGLE_TYPE9)
+                dongle_id = 0x9;
+
+        /* There doesn't seem to be any way of getting the cfg_base.
          * On my box, cfg_base is in the PnP descriptor of the
          * motherboard. Oh well... Jean II */
 
@@ -947,7 +950,7 @@ static int nsc_ircc_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *i
                 pnp_info.dma = pnp_dma(dev, 0);
 
         IRDA_DEBUG(0, "%s() : From PnP, found firbase 0x%03X ; irq %d ; dma %d.\n",
-                   __FUNCTION__, pnp_info.fir_base, pnp_info.irq, pnp_info.dma);
+                   __func__, pnp_info.fir_base, pnp_info.irq, pnp_info.dma);
 
         if((pnp_info.fir_base == 0) ||
            (pnp_info.irq == -1) || (pnp_info.dma == -1)) {
@@ -976,7 +979,7 @@ static int nsc_ircc_setup(chipio_t *info)
         version = inb(iobase+MID);
 
         IRDA_DEBUG(2, "%s() Driver %s Found chip version %02x\n",
-                   __FUNCTION__, driver_name, version);
+                   __func__, driver_name, version);
 
         /* Should be 0x2? */
         if (0x20 != (version & 0xf0)) {
@@ -1080,30 +1083,30 @@ static void nsc_ircc_init_dongle_interface (int iobase, int dongle_id)
         case 0x00: /* same as */
         case 0x01: /* Differential serial interface */
                 IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
-                           __FUNCTION__, dongle_types[dongle_id]); 
+                           __func__, dongle_types[dongle_id]);
                 break;
         case 0x02: /* same as */
         case 0x03: /* Reserved */
                 IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
-                           __FUNCTION__, dongle_types[dongle_id]); 
+                           __func__, dongle_types[dongle_id]);
                 break;
         case 0x04: /* Sharp RY5HD01 */
                 break;
         case 0x05: /* Reserved, but this is what the Thinkpad reports */
                 IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
-                           __FUNCTION__, dongle_types[dongle_id]); 
+                           __func__, dongle_types[dongle_id]);
                 break;
         case 0x06: /* Single-ended serial interface */
                 IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
-                           __FUNCTION__, dongle_types[dongle_id]); 
+                           __func__, dongle_types[dongle_id]);
                 break;
         case 0x07: /* Consumer-IR only */
                 IRDA_DEBUG(0, "%s(), %s is not for IrDA mode\n",
-                           __FUNCTION__, dongle_types[dongle_id]); 
+                           __func__, dongle_types[dongle_id]);
                 break;
         case 0x08: /* HP HSDL-2300, HP HSDL-3600/HSDL-3610 */
                 IRDA_DEBUG(0, "%s(), %s\n",
-                           __FUNCTION__, dongle_types[dongle_id]);
+                           __func__, dongle_types[dongle_id]);
                 break;
         case 0x09: /* IBM31T1100 or Temic TFDS6000/TFDS6500 */
                 outb(0x28, iobase+7); /* Set irsl[0-2] as output */
@@ -1111,7 +1114,7 @@ static void nsc_ircc_init_dongle_interface (int iobase, int dongle_id)
         case 0x0A: /* same as */
         case 0x0B: /* Reserved */
                 IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
-                           __FUNCTION__, dongle_types[dongle_id]); 
+                           __func__, dongle_types[dongle_id]);
                 break;
         case 0x0C: /* same as */
         case 0x0D: /* HP HSDL-1100/HSDL-2100 */
@@ -1126,14 +1129,14 @@ static void nsc_ircc_init_dongle_interface (int iobase, int dongle_id)
                 break;
         case 0x0F: /* No dongle connected */
                 IRDA_DEBUG(0, "%s(), %s\n",
-                           __FUNCTION__, dongle_types[dongle_id]); 
+                           __func__, dongle_types[dongle_id]);
 
                 switch_bank(iobase, BANK0);
                 outb(0x62, iobase+MCR);
                 break;
         default: 
                 IRDA_DEBUG(0, "%s(), invalid dongle_id %#x", 
-                           __FUNCTION__, dongle_id);
+                           __func__, dongle_id);
         }
         
         /* IRCFG1: IRSL1 and 2 are set to IrDA mode */
@@ -1165,30 +1168,30 @@ static void nsc_ircc_change_dongle_speed(int iobase, int speed, int dongle_id)
         case 0x00: /* same as */
         case 0x01: /* Differential serial interface */
                 IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
-                           __FUNCTION__, dongle_types[dongle_id]); 
+                           __func__, dongle_types[dongle_id]);
                 break;
         case 0x02: /* same as */
         case 0x03: /* Reserved */
                 IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
-                           __FUNCTION__, dongle_types[dongle_id]); 
+                           __func__, dongle_types[dongle_id]);
                 break;
         case 0x04: /* Sharp RY5HD01 */
                 break;
         case 0x05: /* Reserved */
                 IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
-                           __FUNCTION__, dongle_types[dongle_id]); 
+                           __func__, dongle_types[dongle_id]);
                 break;
         case 0x06: /* Single-ended serial interface */
                 IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
-                           __FUNCTION__, dongle_types[dongle_id]); 
+                           __func__, dongle_types[dongle_id]);
                 break;
         case 0x07: /* Consumer-IR only */
                 IRDA_DEBUG(0, "%s(), %s is not for IrDA mode\n",
-                           __FUNCTION__, dongle_types[dongle_id]); 
+                           __func__, dongle_types[dongle_id]);
                 break;
         case 0x08: /* HP HSDL-2300, HP HSDL-3600/HSDL-3610 */
                 IRDA_DEBUG(0, "%s(), %s\n", 
-                           __FUNCTION__, dongle_types[dongle_id]); 
+                           __func__, dongle_types[dongle_id]);
                 outb(0x00, iobase+4);
                 if (speed > 115200)
                         outb(0x01, iobase+4);
@@ -1207,7 +1210,7 @@ static void nsc_ircc_change_dongle_speed(int iobase, int speed, int dongle_id)
         case 0x0A: /* same as */
         case 0x0B: /* Reserved */
                 IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
-                           __FUNCTION__, dongle_types[dongle_id]); 
+                           __func__, dongle_types[dongle_id]);
                 break;
         case 0x0C: /* same as */
         case 0x0D: /* HP HSDL-1100/HSDL-2100 */
@@ -1216,13 +1219,13 @@ static void nsc_ircc_change_dongle_speed(int iobase, int speed, int dongle_id)
                 break;
         case 0x0F: /* No dongle connected */
                 IRDA_DEBUG(0, "%s(), %s is not for IrDA mode\n",
-                           __FUNCTION__, dongle_types[dongle_id]);
+                           __func__, dongle_types[dongle_id]);
 
                 switch_bank(iobase, BANK0); 
                 outb(0x62, iobase+MCR);
                 break;
         default: 
-                IRDA_DEBUG(0, "%s(), invalid data_rate\n", __FUNCTION__);
+                IRDA_DEBUG(0, "%s(), invalid data_rate\n", __func__);
         }
         /* Restore bank register */
         outb(bank, iobase+BSR);
@@ -1243,7 +1246,7 @@ static __u8 nsc_ircc_change_speed(struct nsc_ircc_cb *self, __u32 speed)
         __u8 bank;
         __u8 ier;                  /* Interrupt enable register */
 
-        IRDA_DEBUG(2, "%s(), speed=%d\n", __FUNCTION__, speed);
+        IRDA_DEBUG(2, "%s(), speed=%d\n", __func__, speed);
 
         IRDA_ASSERT(self != NULL, return 0;);
 
@@ -1276,20 +1279,20 @@ static __u8 nsc_ircc_change_speed(struct nsc_ircc_cb *self, __u32 speed)
                 outb(inb(iobase+4) | 0x04, iobase+4);
                
                 mcr = MCR_MIR;
-                IRDA_DEBUG(0, "%s(), handling baud of 576000\n", __FUNCTION__);
+                IRDA_DEBUG(0, "%s(), handling baud of 576000\n", __func__);
                 break;
         case 1152000:
                 mcr = MCR_MIR;
-                IRDA_DEBUG(0, "%s(), handling baud of 1152000\n", __FUNCTION__);
+                IRDA_DEBUG(0, "%s(), handling baud of 1152000\n", __func__);
                 break;
         case 4000000:
                 mcr = MCR_FIR;
-                IRDA_DEBUG(0, "%s(), handling baud of 4000000\n", __FUNCTION__);
+                IRDA_DEBUG(0, "%s(), handling baud of 4000000\n", __func__);
                 break;
         default:
                 mcr = MCR_FIR;
                 IRDA_DEBUG(0, "%s(), unknown baud rate of %d\n", 
-                           __FUNCTION__, speed);
+                           __func__, speed);
                 break;
         }
 
@@ -1594,7 +1597,7 @@ static int nsc_ircc_pio_write(int iobase, __u8 *buf, int len, int fifo_size)
         int actual = 0;
         __u8 bank;
         
-        IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+        IRDA_DEBUG(4, "%s()\n", __func__);
 
         /* Save current bank */
         bank = inb(iobase+BSR);
@@ -1602,7 +1605,7 @@ static int nsc_ircc_pio_write(int iobase, __u8 *buf, int len, int fifo_size)
         switch_bank(iobase, BANK0);
         if (!(inb_p(iobase+LSR) & LSR_TXEMP)) {
                 IRDA_DEBUG(4, "%s(), warning, FIFO not empty yet!\n",
-                           __FUNCTION__);
+                           __func__);
 
                 /* FIFO may still be filled to the Tx interrupt threshold */
                 fifo_size -= 17;
@@ -1615,7 +1618,7 @@ static int nsc_ircc_pio_write(int iobase, __u8 *buf, int len, int fifo_size)
         }
         
         IRDA_DEBUG(4, "%s(), fifo_size %d ; %d sent of %d\n", 
-                   __FUNCTION__, fifo_size, actual, len);
+                   __func__, fifo_size, actual, len);
         
         /* Restore bank */
         outb(bank, iobase+BSR);
@@ -1636,7 +1639,7 @@ static int nsc_ircc_dma_xmit_complete(struct nsc_ircc_cb *self)
         __u8 bank;
         int ret = TRUE;
 
-        IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+        IRDA_DEBUG(2, "%s()\n", __func__);
 
         iobase = self->io.fir_base;
 
@@ -1767,7 +1770,7 @@ static int nsc_ircc_dma_receive_complete(struct nsc_ircc_cb *self, int iobase)
                 len = inb(iobase+RFLFL) | ((inb(iobase+RFLFH) & 0x1f) << 8);
 
                 if (st_fifo->tail >= MAX_RX_WINDOW) {
-                        IRDA_DEBUG(0, "%s(), window is full!\n", __FUNCTION__);
+                        IRDA_DEBUG(0, "%s(), window is full!\n", __func__);
                         continue;
                 }
                         
@@ -1859,7 +1862,7 @@ static int nsc_ircc_dma_receive_complete(struct nsc_ircc_cb *self, int iobase)
                         if (skb == NULL)  {
                                 IRDA_WARNING("%s(), memory squeeze, "
                                              "dropping frame.\n",
-                                             __FUNCTION__);
+                                             __func__);
                                 self->stats.rx_dropped++;
 
                                 /* Restore bank register */
@@ -1965,7 +1968,7 @@ static void nsc_ircc_sir_interrupt(struct nsc_ircc_cb *self, int eir)
                  * Need to be after self->io.direction to avoid race with
                  * nsc_ircc_hard_xmit_sir() - Jean II */
                 if (self->new_speed) {
-                        IRDA_DEBUG(2, "%s(), Changing speed!\n", __FUNCTION__);
+                        IRDA_DEBUG(2, "%s(), Changing speed!\n", __func__);
                         self->ier = nsc_ircc_change_speed(self,
                                                           self->new_speed);
                         self->new_speed = 0;
@@ -2051,7 +2054,7 @@ static void nsc_ircc_fir_interrupt(struct nsc_ircc_cb *self, int iobase,
                                 } else
                                         IRDA_WARNING("%s(), potential "
                                                      "Tx queue lockup !\n",
-                                                     __FUNCTION__);
+                                                     __func__);
                         }
                 } else {
                         /*  Not finished yet, so interrupt on DMA again */
@@ -2160,7 +2163,7 @@ static int nsc_ircc_net_open(struct net_device *dev)
         char hwname[32];
         __u8 bank;
         
-        IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+        IRDA_DEBUG(4, "%s()\n", __func__);
         
         IRDA_ASSERT(dev != NULL, return -1;);
         self = (struct nsc_ircc_cb *) dev->priv;
@@ -2222,7 +2225,7 @@ static int nsc_ircc_net_close(struct net_device *dev)
         int iobase;
         __u8 bank;
 
-        IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+        IRDA_DEBUG(4, "%s()\n", __func__);
         
         IRDA_ASSERT(dev != NULL, return -1;);
 
@@ -2276,7 +2279,7 @@ static int nsc_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 
         IRDA_ASSERT(self != NULL, return -1;);
 
-        IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__, dev->name, cmd);
+        IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __func__, dev->name, cmd);
         
         switch (cmd) {
         case SIOCSBANDWIDTH: /* Set bandwidth */
diff --git a/drivers/net/irda/nsc-ircc.h b/drivers/net/irda/nsc-ircc.h
index 29398a4f73fd..71cd3c5a0762 100644
--- a/drivers/net/irda/nsc-ircc.h
+++ b/drivers/net/irda/nsc-ircc.h
@@ -35,6 +35,9 @@
 #include <linux/types.h>
 #include <asm/io.h>
 
+/* Features for chips (set in driver_data) */
+#define NSC_FORCE_DONGLE_TYPE9  0x00000001
+
 /* DMA modes needed */
 #define DMA_TX_MODE     0x08    /* Mem to I/O, ++, demand. */
 #define DMA_RX_MODE     0x04    /* I/O to mem, ++, demand. */
diff --git a/drivers/net/irda/old_belkin-sir.c b/drivers/net/irda/old_belkin-sir.c
index 8c22c7374a23..75714bc71030 100644
--- a/drivers/net/irda/old_belkin-sir.c
+++ b/drivers/net/irda/old_belkin-sir.c
@@ -92,7 +92,7 @@ static int old_belkin_open(struct sir_dev *dev)
 {
         struct qos_info *qos = &dev->qos;
 
-        IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+        IRDA_DEBUG(2, "%s()\n", __func__);
 
         /* Power on dongle */
         sirdev_set_dtr_rts(dev, TRUE, TRUE);
@@ -110,7 +110,7 @@ static int old_belkin_open(struct sir_dev *dev)
 
 static int old_belkin_close(struct sir_dev *dev)
 {
-        IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+        IRDA_DEBUG(2, "%s()\n", __func__);
 
         /* Power off dongle */
         sirdev_set_dtr_rts(dev, FALSE, FALSE);
@@ -125,7 +125,7 @@ static int old_belkin_close(struct sir_dev *dev)
  */
 static int old_belkin_change_speed(struct sir_dev *dev, unsigned speed)
 {
-        IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+        IRDA_DEBUG(2, "%s()\n", __func__);
 
         dev->speed = 9600;
         return (speed==dev->speed) ? 0 : -EINVAL;
@@ -139,7 +139,7 @@ static int old_belkin_change_speed(struct sir_dev *dev, unsigned speed)
  */
 static int old_belkin_reset(struct sir_dev *dev)
 {
-        IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+        IRDA_DEBUG(2, "%s()\n", __func__);
 
         /* This dongles speed "defaults" to 9600 bps ;-) */
         dev->speed = 9600;
diff --git a/drivers/net/irda/sir_dev.c b/drivers/net/irda/sir_dev.c
index 6078e03de9a8..3f32909c24c8 100644
--- a/drivers/net/irda/sir_dev.c
+++ b/drivers/net/irda/sir_dev.c
@@ -80,7 +80,7 @@ static int sirdev_tx_complete_fsm(struct sir_dev *dev)
                         return 0;
 
                 default:
-                        IRDA_ERROR("%s - undefined state\n", __FUNCTION__);
+                        IRDA_ERROR("%s - undefined state\n", __func__);
                         return -EINVAL;
                 }
                 fsm->substate = next_state;
@@ -107,11 +107,11 @@ static void sirdev_config_fsm(struct work_struct *work)
         int ret = -1;
         unsigned delay;
 
-        IRDA_DEBUG(2, "%s(), <%ld>\n", __FUNCTION__, jiffies);
+        IRDA_DEBUG(2, "%s(), <%ld>\n", __func__, jiffies);
 
         do {
                 IRDA_DEBUG(3, "%s - state=0x%04x / substate=0x%04x\n",
-                        __FUNCTION__, fsm->state, fsm->substate);
+                        __func__, fsm->state, fsm->substate);
 
                 next_state = fsm->state;
                 delay = 0;
@@ -249,12 +249,12 @@ static void sirdev_config_fsm(struct work_struct *work)
                         break;
 
                 default:
-                        IRDA_ERROR("%s - undefined state\n", __FUNCTION__);
+                        IRDA_ERROR("%s - undefined state\n", __func__);
                         fsm->result = -EINVAL;
                         /* fall thru */
 
                 case SIRDEV_STATE_ERROR:
-                        IRDA_ERROR("%s - error: %d\n", __FUNCTION__, fsm->result);
+                        IRDA_ERROR("%s - error: %d\n", __func__, fsm->result);
 
 #if 0   /* don't enable this before we have netdev->tx_timeout to recover */
                         netif_stop_queue(dev->netdev);
@@ -284,11 +284,12 @@ int sirdev_schedule_request(struct sir_dev *dev, int initial_state, unsigned par
 {
         struct sir_fsm *fsm = &dev->fsm;
 
-        IRDA_DEBUG(2, "%s - state=0x%04x / param=%u\n", __FUNCTION__, initial_state, param);
+        IRDA_DEBUG(2, "%s - state=0x%04x / param=%u\n", __func__,
+                        initial_state, param);
 
         if (down_trylock(&fsm->sem)) {
                 if (in_interrupt()  ||  in_atomic()  ||  irqs_disabled()) {
-                        IRDA_DEBUG(1, "%s(), state machine busy!\n", __FUNCTION__);
+                        IRDA_DEBUG(1, "%s(), state machine busy!\n", __func__);
                         return -EWOULDBLOCK;
                 } else
                         down(&fsm->sem);
@@ -296,7 +297,7 @@ int sirdev_schedule_request(struct sir_dev *dev, int initial_state, unsigned par
 
         if (fsm->state == SIRDEV_STATE_DEAD) {
                 /* race with sirdev_close should never happen */
-                IRDA_ERROR("%s(), instance staled!\n", __FUNCTION__);
+                IRDA_ERROR("%s(), instance staled!\n", __func__);
                 up(&fsm->sem);
                 return -ESTALE;         /* or better EPIPE? */
         }
@@ -341,7 +342,7 @@ int sirdev_set_dongle(struct sir_dev *dev, IRDA_DONGLE type)
 {
         int err;
 
-        IRDA_DEBUG(3, "%s : requesting dongle %d.\n", __FUNCTION__, type);
+        IRDA_DEBUG(3, "%s : requesting dongle %d.\n", __func__, type);
 
         err = sirdev_schedule_dongle_open(dev, type);
         if (unlikely(err))
@@ -376,7 +377,7 @@ int sirdev_raw_write(struct sir_dev *dev, const char *buf, int len)
 
         ret = dev->drv->do_write(dev, dev->tx_buff.data, dev->tx_buff.len);
         if (ret > 0) {
-                IRDA_DEBUG(3, "%s(), raw-tx started\n", __FUNCTION__);
+                IRDA_DEBUG(3, "%s(), raw-tx started\n", __func__);
 
                 dev->tx_buff.data += ret;
                 dev->tx_buff.len -= ret;
@@ -437,7 +438,7 @@ void sirdev_write_complete(struct sir_dev *dev)
         spin_lock_irqsave(&dev->tx_lock, flags);
 
         IRDA_DEBUG(3, "%s() - dev->tx_buff.len = %d\n",
-                   __FUNCTION__, dev->tx_buff.len);
+                   __func__, dev->tx_buff.len);
 
         if (likely(dev->tx_buff.len > 0))  {
                 /* Write data left in transmit buffer */
@@ -450,7 +451,7 @@ void sirdev_write_complete(struct sir_dev *dev)
                 else if (unlikely(actual<0)) {
                         /* could be dropped later when we have tx_timeout to recover */
                         IRDA_ERROR("%s: drv->do_write failed (%d)\n",
-                                   __FUNCTION__, actual);
+                                   __func__, actual);
                         if ((skb=dev->tx_skb) != NULL) {
                                 dev->tx_skb = NULL;
                                 dev_kfree_skb_any(skb);
@@ -471,7 +472,7 @@ void sirdev_write_complete(struct sir_dev *dev)
                  * restarted when the irda-thread has completed the request.
                  */
 
-                IRDA_DEBUG(3, "%s(), raw-tx done\n", __FUNCTION__);
+                IRDA_DEBUG(3, "%s(), raw-tx done\n", __func__);
                 dev->raw_tx = 0;
                 goto done;      /* no post-frame handling in raw mode */
         }
@@ -488,7 +489,7 @@ void sirdev_write_complete(struct sir_dev *dev)
          * re-activated.
          */
 
-        IRDA_DEBUG(5, "%s(), finished with frame!\n", __FUNCTION__);
+        IRDA_DEBUG(5, "%s(), finished with frame!\n", __func__);
                 
         if ((skb=dev->tx_skb) != NULL) {
                 dev->tx_skb = NULL;
@@ -498,14 +499,14 @@ void sirdev_write_complete(struct sir_dev *dev)
         }
 
         if (unlikely(dev->new_speed > 0)) {
-                IRDA_DEBUG(5, "%s(), Changing speed!\n", __FUNCTION__);
+                IRDA_DEBUG(5, "%s(), Changing speed!\n", __func__);
                 err = sirdev_schedule_speed(dev, dev->new_speed);
                 if (unlikely(err)) {
                         /* should never happen
                          * forget the speed change and hope the stack recovers
                          */
                         IRDA_ERROR("%s - schedule speed change failed: %d\n",
-                                   __FUNCTION__, err);
+                                   __func__, err);
                         netif_wake_queue(dev->netdev);
                 }
                 /* else: success
@@ -532,13 +533,13 @@ EXPORT_SYMBOL(sirdev_write_complete);
 int sirdev_receive(struct sir_dev *dev, const unsigned char *cp, size_t count) 
 {
         if (!dev || !dev->netdev) {
-                IRDA_WARNING("%s(), not ready yet!\n", __FUNCTION__);
+                IRDA_WARNING("%s(), not ready yet!\n", __func__);
                 return -1;
         }
 
         if (!dev->irlap) {
                 IRDA_WARNING("%s - too early: %p / %zd!\n",
-                             __FUNCTION__, cp, count);
+                             __func__, cp, count);
                 return -1;
         }
 
@@ -548,7 +549,7 @@ int sirdev_receive(struct sir_dev *dev, const unsigned char *cp, size_t count)
                  */
                 irda_device_set_media_busy(dev->netdev, TRUE);
                 dev->stats.rx_dropped++;
-                IRDA_DEBUG(0, "%s; rx-drop: %zd\n", __FUNCTION__, count);
+                IRDA_DEBUG(0, "%s; rx-drop: %zd\n", __func__, count);
                 return 0;
         }
 
@@ -600,7 +601,7 @@ static int sirdev_hard_xmit(struct sk_buff *skb, struct net_device *ndev)
 
         netif_stop_queue(ndev);
 
-        IRDA_DEBUG(3, "%s(), skb->len = %d\n", __FUNCTION__, skb->len);
+        IRDA_DEBUG(3, "%s(), skb->len = %d\n", __func__, skb->len);
 
         speed = irda_get_next_speed(skb);
         if ((speed != dev->speed) && (speed != -1)) {
@@ -637,7 +638,7 @@ static int sirdev_hard_xmit(struct sk_buff *skb, struct net_device *ndev)
 
         /* Check problems */
         if(spin_is_locked(&dev->tx_lock)) {
-                IRDA_DEBUG(3, "%s(), write not completed\n", __FUNCTION__);
+                IRDA_DEBUG(3, "%s(), write not completed\n", __func__);
         }
 
         /* serialize with write completion */
@@ -666,7 +667,7 @@ static int sirdev_hard_xmit(struct sk_buff *skb, struct net_device *ndev)
         else if (unlikely(actual < 0)) {
                 /* could be dropped later when we have tx_timeout to recover */
                 IRDA_ERROR("%s: drv->do_write failed (%d)\n",
-                           __FUNCTION__, actual);
+                           __func__, actual);
                 dev_kfree_skb_any(skb);
                 dev->stats.tx_errors++;               
                 dev->stats.tx_dropped++;                      
@@ -687,7 +688,7 @@ static int sirdev_ioctl(struct net_device *ndev, struct ifreq *rq, int cmd)
 
         IRDA_ASSERT(dev != NULL, return -1;);
 
-        IRDA_DEBUG(3, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__, ndev->name, cmd);
+        IRDA_DEBUG(3, "%s(), %s, (cmd=0x%X)\n", __func__, ndev->name, cmd);
         
         switch (cmd) {
         case SIOCSBANDWIDTH: /* Set bandwidth */
@@ -804,7 +805,7 @@ static int sirdev_open(struct net_device *ndev)
         if (!try_module_get(drv->owner))
                 return -ESTALE;
 
-        IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+        IRDA_DEBUG(2, "%s()\n", __func__);
 
         if (sirdev_alloc_buffers(dev))
                 goto errout_dec;
@@ -822,7 +823,7 @@ static int sirdev_open(struct net_device *ndev)
 
         netif_wake_queue(ndev);
 
-        IRDA_DEBUG(2, "%s - done, speed = %d\n", __FUNCTION__, dev->speed);
+        IRDA_DEBUG(2, "%s - done, speed = %d\n", __func__, dev->speed);
 
         return 0;
 
@@ -842,7 +843,7 @@ static int sirdev_close(struct net_device *ndev)
         struct sir_dev *dev = ndev->priv;
         const struct sir_driver *drv;
 
-//      IRDA_DEBUG(0, "%s\n", __FUNCTION__);
+//      IRDA_DEBUG(0, "%s\n", __func__);
 
         netif_stop_queue(ndev);
 
@@ -878,7 +879,7 @@ struct sir_dev * sirdev_get_instance(const struct sir_driver *drv, const char *n
         struct net_device *ndev;
         struct sir_dev *dev;
 
-        IRDA_DEBUG(0, "%s - %s\n", __FUNCTION__, name);
+        IRDA_DEBUG(0, "%s - %s\n", __func__, name);
 
         /* instead of adding tests to protect against drv->do_write==NULL
          * at several places we refuse to create a sir_dev instance for
@@ -892,7 +893,7 @@ struct sir_dev * sirdev_get_instance(const struct sir_driver *drv, const char *n
          */
         ndev = alloc_irdadev(sizeof(*dev));
         if (ndev == NULL) {
-                IRDA_ERROR("%s - Can't allocate memory for IrDA control block!\n", __FUNCTION__);
+                IRDA_ERROR("%s - Can't allocate memory for IrDA control block!\n", __func__);
                 goto out;
         }
         dev = ndev->priv;
@@ -921,7 +922,7 @@ struct sir_dev * sirdev_get_instance(const struct sir_driver *drv, const char *n
         ndev->do_ioctl = sirdev_ioctl;
 
         if (register_netdev(ndev)) {
-                IRDA_ERROR("%s(), register_netdev() failed!\n", __FUNCTION__);
+                IRDA_ERROR("%s(), register_netdev() failed!\n", __func__);
                 goto out_freenetdev;
         }
 
@@ -938,7 +939,7 @@ int sirdev_put_instance(struct sir_dev *dev)
 {
         int err = 0;
 
-        IRDA_DEBUG(0, "%s\n", __FUNCTION__);
+        IRDA_DEBUG(0, "%s\n", __func__);
 
         atomic_set(&dev->enable_rx, 0);
 
@@ -948,7 +949,7 @@ int sirdev_put_instance(struct sir_dev *dev)
         if (dev->dongle_drv)
                 err = sirdev_schedule_dongle_close(dev);
         if (err)
-                IRDA_ERROR("%s - error %d\n", __FUNCTION__, err);
+                IRDA_ERROR("%s - error %d\n", __func__, err);
 
         sirdev_close(dev->netdev);
 
diff --git a/drivers/net/irda/sir_dongle.c b/drivers/net/irda/sir_dongle.c
index 25d5b8a96bdc..36030241f7a9 100644
--- a/drivers/net/irda/sir_dongle.c
+++ b/drivers/net/irda/sir_dongle.c
@@ -36,7 +36,7 @@ int irda_register_dongle(struct dongle_driver *new)
         struct dongle_driver *drv;
 
         IRDA_DEBUG(0, "%s : registering dongle \"%s\" (%d).\n",
-                   __FUNCTION__, new->driver_name, new->type);
+                   __func__, new->driver_name, new->type);
 
         mutex_lock(&dongle_list_lock);
         list_for_each(entry, &dongle_list) {
diff --git a/drivers/net/irda/smsc-ircc2.c b/drivers/net/irda/smsc-ircc2.c
index 78dc8e7837f0..b5360fe99d3a 100644
--- a/drivers/net/irda/smsc-ircc2.c
+++ b/drivers/net/irda/smsc-ircc2.c
@@ -460,7 +460,7 @@ static int __init smsc_ircc_init(void)
 {
         int ret;
 
-        IRDA_DEBUG(1, "%s\n", __FUNCTION__);
+        IRDA_DEBUG(1, "%s\n", __func__);
 
         ret = platform_driver_register(&smsc_ircc_driver);
         if (ret) {
@@ -500,7 +500,7 @@ static int __init smsc_ircc_open(unsigned int fir_base, unsigned int sir_base, u
         struct net_device *dev;
         int err;
 
-        IRDA_DEBUG(1, "%s\n", __FUNCTION__);
+        IRDA_DEBUG(1, "%s\n", __func__);
 
         err = smsc_ircc_present(fir_base, sir_base);
         if (err)
@@ -508,7 +508,7 @@ static int __init smsc_ircc_open(unsigned int fir_base, unsigned int sir_base, u
 
         err = -ENOMEM;
         if (dev_count >= ARRAY_SIZE(dev_self)) {
-                IRDA_WARNING("%s(), too many devices!\n", __FUNCTION__);
+                IRDA_WARNING("%s(), too many devices!\n", __func__);
                 goto err_out1;
         }
 
@@ -517,7 +517,7 @@ static int __init smsc_ircc_open(unsigned int fir_base, unsigned int sir_base, u
          */
         dev = alloc_irdadev(sizeof(struct smsc_ircc_cb));
         if (!dev) {
-                IRDA_WARNING("%s() can't allocate net device\n", __FUNCTION__);
+                IRDA_WARNING("%s() can't allocate net device\n", __func__);
                 goto err_out1;
         }
 
@@ -633,14 +633,14 @@ static int smsc_ircc_present(unsigned int fir_base, unsigned int sir_base)
         if (!request_region(fir_base, SMSC_IRCC2_FIR_CHIP_IO_EXTENT,
                             driver_name)) {
                 IRDA_WARNING("%s: can't get fir_base of 0x%03x\n",
-                             __FUNCTION__, fir_base);
+                             __func__, fir_base);
                 goto out1;
         }
 
         if (!request_region(sir_base, SMSC_IRCC2_SIR_CHIP_IO_EXTENT,
                             driver_name)) {
                 IRDA_WARNING("%s: can't get sir_base of 0x%03x\n",
-                             __FUNCTION__, sir_base);
+                             __func__, sir_base);
                 goto out2;
         }
 
@@ -656,7 +656,7 @@ static int smsc_ircc_present(unsigned int fir_base, unsigned int sir_base)
 
         if (high != 0x10 || low != 0xb8 || (chip != 0xf1 && chip != 0xf2)) {
                 IRDA_WARNING("%s(), addr 0x%04x - no device found!\n",
-                             __FUNCTION__, fir_base);
+                             __func__, fir_base);
                 goto out3;
         }
         IRDA_MESSAGE("SMsC IrDA Controller found\n IrCC version %d.%d, "
@@ -793,7 +793,7 @@ static int smsc_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd
 
         IRDA_ASSERT(self != NULL, return -1;);
 
-        IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__, dev->name, cmd);
+        IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __func__, dev->name, cmd);
 
         switch (cmd) {
         case SIOCSBANDWIDTH: /* Set bandwidth */
@@ -878,7 +878,7 @@ int smsc_ircc_hard_xmit_sir(struct sk_buff *skb, struct net_device *dev)
         unsigned long flags;
         s32 speed;
 
-        IRDA_DEBUG(1, "%s\n", __FUNCTION__);
+        IRDA_DEBUG(1, "%s\n", __func__);
 
         IRDA_ASSERT(dev != NULL, return 0;);
 
@@ -953,21 +953,21 @@ static void smsc_ircc_set_fir_speed(struct smsc_ircc_cb *self, u32 speed)
                 ir_mode = IRCC_CFGA_IRDA_HDLC;
                 ctrl = IRCC_CRC;
                 fast = 0;
-                IRDA_DEBUG(0, "%s(), handling baud of 576000\n", __FUNCTION__);
+                IRDA_DEBUG(0, "%s(), handling baud of 576000\n", __func__);
                 break;
         case 1152000:
                 ir_mode = IRCC_CFGA_IRDA_HDLC;
                 ctrl = IRCC_1152 | IRCC_CRC;
                 fast = IRCC_LCR_A_FAST | IRCC_LCR_A_GP_DATA;
                 IRDA_DEBUG(0, "%s(), handling baud of 1152000\n",
-                           __FUNCTION__);
+                           __func__);
                 break;
         case 4000000:
                 ir_mode = IRCC_CFGA_IRDA_4PPM;
                 ctrl = IRCC_CRC;
                 fast = IRCC_LCR_A_FAST;
                 IRDA_DEBUG(0, "%s(), handling baud of 4000000\n",
-                           __FUNCTION__);
+                           __func__);
                 break;
         }
         #if 0
@@ -995,7 +995,7 @@ static void smsc_ircc_fir_start(struct smsc_ircc_cb *self)
         struct net_device *dev;
         int fir_base;
 
-        IRDA_DEBUG(1, "%s\n", __FUNCTION__);
+        IRDA_DEBUG(1, "%s\n", __func__);
 
         IRDA_ASSERT(self != NULL, return;);
         dev = self->netdev;
@@ -1043,7 +1043,7 @@ static void smsc_ircc_fir_stop(struct smsc_ircc_cb *self)
 {
         int fir_base;
 
-        IRDA_DEBUG(1, "%s\n", __FUNCTION__);
+        IRDA_DEBUG(1, "%s\n", __func__);
 
         IRDA_ASSERT(self != NULL, return;);
 
@@ -1067,7 +1067,7 @@ static void smsc_ircc_change_speed(struct smsc_ircc_cb *self, u32 speed)
         struct net_device *dev;
         int last_speed_was_sir;
 
-        IRDA_DEBUG(0, "%s() changing speed to: %d\n", __FUNCTION__, speed);
+        IRDA_DEBUG(0, "%s() changing speed to: %d\n", __func__, speed);
 
         IRDA_ASSERT(self != NULL, return;);
         dev = self->netdev;
@@ -1135,7 +1135,7 @@ void smsc_ircc_set_sir_speed(struct smsc_ircc_cb *self, __u32 speed)
         int lcr;    /* Line control reg */
         int divisor;
 
-        IRDA_DEBUG(0, "%s(), Setting speed to: %d\n", __FUNCTION__, speed);
+        IRDA_DEBUG(0, "%s(), Setting speed to: %d\n", __func__, speed);
 
         IRDA_ASSERT(self != NULL, return;);
         iobase = self->io.sir_base;
@@ -1170,7 +1170,7 @@ void smsc_ircc_set_sir_speed(struct smsc_ircc_cb *self, __u32 speed)
         /* Turn on interrups */
         outb(UART_IER_RLSI | UART_IER_RDI | UART_IER_THRI, iobase + UART_IER);
 
-        IRDA_DEBUG(2, "%s() speed changed to: %d\n", __FUNCTION__, speed);
+        IRDA_DEBUG(2, "%s() speed changed to: %d\n", __func__, speed);
 }
 
 
@@ -1253,7 +1253,7 @@ static void smsc_ircc_dma_xmit(struct smsc_ircc_cb *self, int bofs)
         int iobase = self->io.fir_base;
         u8 ctrl;
 
-        IRDA_DEBUG(3, "%s\n", __FUNCTION__);
+        IRDA_DEBUG(3, "%s\n", __func__);
 #if 1
         /* Disable Rx */
         register_bank(iobase, 0);
@@ -1307,7 +1307,7 @@ static void smsc_ircc_dma_xmit_complete(struct smsc_ircc_cb *self)
 {
         int iobase = self->io.fir_base;
 
-        IRDA_DEBUG(3, "%s\n", __FUNCTION__);
+        IRDA_DEBUG(3, "%s\n", __func__);
 #if 0
         /* Disable Tx */
         register_bank(iobase, 0);
@@ -1411,7 +1411,7 @@ static void smsc_ircc_dma_receive_complete(struct smsc_ircc_cb *self)
 
         register_bank(iobase, 0);
 
-        IRDA_DEBUG(3, "%s\n", __FUNCTION__);
+        IRDA_DEBUG(3, "%s\n", __func__);
 #if 0
         /* Disable Rx */
         register_bank(iobase, 0);
@@ -1422,7 +1422,7 @@ static void smsc_ircc_dma_receive_complete(struct smsc_ircc_cb *self)
         lsr= inb(iobase + IRCC_LSR);
         msgcnt = inb(iobase + IRCC_LCR_B) & 0x08;
 
-        IRDA_DEBUG(2, "%s: dma count = %d\n", __FUNCTION__,
+        IRDA_DEBUG(2, "%s: dma count = %d\n", __func__,
                    get_dma_residue(self->io.dma));
 
         len = self->rx_buff.truesize - get_dma_residue(self->io.dma);
@@ -1445,15 +1445,15 @@ static void smsc_ircc_dma_receive_complete(struct smsc_ircc_cb *self)
         len -= self->io.speed < 4000000 ? 2 : 4;
 
         if (len < 2 || len > 2050) {
-                IRDA_WARNING("%s(), bogus len=%d\n", __FUNCTION__, len);
+                IRDA_WARNING("%s(), bogus len=%d\n", __func__, len);
                 return;
         }
-        IRDA_DEBUG(2, "%s: msgcnt = %d, len=%d\n", __FUNCTION__, msgcnt, len);
+        IRDA_DEBUG(2, "%s: msgcnt = %d, len=%d\n", __func__, msgcnt, len);
 
         skb = dev_alloc_skb(len + 1);
         if (!skb) {
                 IRDA_WARNING("%s(), memory squeeze, dropping frame.\n",
-                             __FUNCTION__);
+                             __func__);
                 return;
         }
         /* Make sure IP header gets aligned */
@@ -1494,7 +1494,7 @@ static void smsc_ircc_sir_receive(struct smsc_ircc_cb *self)
 
                 /* Make sure we don't stay here to long */
                 if (boguscount++ > 32) {
-                        IRDA_DEBUG(2, "%s(), breaking!\n", __FUNCTION__);
+                        IRDA_DEBUG(2, "%s(), breaking!\n", __func__);
                         break;
                 }
         } while (inb(iobase + UART_LSR) & UART_LSR_DR);
@@ -1536,7 +1536,7 @@ static irqreturn_t smsc_ircc_interrupt(int dummy, void *dev_id)
         lcra = inb(iobase + IRCC_LCR_A);
         lsr = inb(iobase + IRCC_LSR);
 
-        IRDA_DEBUG(2, "%s(), iir = 0x%02x\n", __FUNCTION__, iir);
+        IRDA_DEBUG(2, "%s(), iir = 0x%02x\n", __func__, iir);
 
         if (iir & IRCC_IIR_EOM) {
                 if (self->io.direction == IO_RECV)
@@ -1548,7 +1548,7 @@ static irqreturn_t smsc_ircc_interrupt(int dummy, void *dev_id)
         }
 
         if (iir & IRCC_IIR_ACTIVE_FRAME) {
-                /*printk(KERN_WARNING "%s(): Active Frame\n", __FUNCTION__);*/
+                /*printk(KERN_WARNING "%s(): Active Frame\n", __func__);*/
         }
 
         /* Enable interrupts again */
@@ -1587,11 +1587,11 @@ static irqreturn_t smsc_ircc_interrupt_sir(struct net_device *dev)
                 lsr = inb(iobase + UART_LSR);
 
                 IRDA_DEBUG(4, "%s(), iir=%02x, lsr=%02x, iobase=%#x\n",
-                            __FUNCTION__, iir, lsr, iobase);
+                            __func__, iir, lsr, iobase);
 
                 switch (iir) {
                 case UART_IIR_RLSI:
-                        IRDA_DEBUG(2, "%s(), RLSI\n", __FUNCTION__);
+                        IRDA_DEBUG(2, "%s(), RLSI\n", __func__);
                         break;
                 case UART_IIR_RDI:
                         /* Receive interrupt */
@@ -1604,7 +1604,7 @@ static irqreturn_t smsc_ircc_interrupt_sir(struct net_device *dev)
                         break;
                 default:
                         IRDA_DEBUG(0, "%s(), unhandled IIR=%#x\n",
-                                   __FUNCTION__, iir);
+                                   __func__, iir);
                         break;
                 }
 
@@ -1631,11 +1631,11 @@ static int ircc_is_receiving(struct smsc_ircc_cb *self)
         int status = FALSE;
         /* int iobase; */
 
-        IRDA_DEBUG(1, "%s\n", __FUNCTION__);
+        IRDA_DEBUG(1, "%s\n", __func__);
 
         IRDA_ASSERT(self != NULL, return FALSE;);
 
-        IRDA_DEBUG(0, "%s: dma count = %d\n", __FUNCTION__,
+        IRDA_DEBUG(0, "%s: dma count = %d\n", __func__,
                    get_dma_residue(self->io.dma));
 
         status = (self->rx_buff.state != OUTSIDE_FRAME);
@@ -1652,7 +1652,7 @@ static int smsc_ircc_request_irq(struct smsc_ircc_cb *self)
                             self->netdev->name, self->netdev);
         if (error)
                 IRDA_DEBUG(0, "%s(), unable to allocate irq=%d, err=%d\n",
-                           __FUNCTION__, self->io.irq, error);
+                           __func__, self->io.irq, error);
 
         return error;
 }
@@ -1696,21 +1696,21 @@ static int smsc_ircc_net_open(struct net_device *dev)
         struct smsc_ircc_cb *self;
         char hwname[16];
 
-        IRDA_DEBUG(1, "%s\n", __FUNCTION__);
+        IRDA_DEBUG(1, "%s\n", __func__);
 
         IRDA_ASSERT(dev != NULL, return -1;);
         self = netdev_priv(dev);
         IRDA_ASSERT(self != NULL, return 0;);
 
         if (self->io.suspended) {
-                IRDA_DEBUG(0, "%s(), device is suspended\n", __FUNCTION__);
+                IRDA_DEBUG(0, "%s(), device is suspended\n", __func__);
                 return -EAGAIN;
         }
 
         if (request_irq(self->io.irq, smsc_ircc_interrupt, 0, dev->name,
                         (void *) dev)) {
                 IRDA_DEBUG(0, "%s(), unable to allocate irq=%d\n",
-                           __FUNCTION__, self->io.irq);
+                           __func__, self->io.irq);
                 return -EAGAIN;
         }
 
@@ -1734,7 +1734,7 @@ static int smsc_ircc_net_open(struct net_device *dev)
                 smsc_ircc_net_close(dev);
 
                 IRDA_WARNING("%s(), unable to allocate DMA=%d\n",
-                             __FUNCTION__, self->io.dma);
+                             __func__, self->io.dma);
                 return -EAGAIN;
         }
 
@@ -1753,7 +1753,7 @@ static int smsc_ircc_net_close(struct net_device *dev)
 {
         struct smsc_ircc_cb *self;
 
-        IRDA_DEBUG(1, "%s\n", __FUNCTION__);
+        IRDA_DEBUG(1, "%s\n", __func__);
 
         IRDA_ASSERT(dev != NULL, return -1;);
         self = netdev_priv(dev);
@@ -1836,7 +1836,7 @@ static int smsc_ircc_resume(struct platform_device *dev)
  */
 static int __exit smsc_ircc_close(struct smsc_ircc_cb *self)
 {
-        IRDA_DEBUG(1, "%s\n", __FUNCTION__);
+        IRDA_DEBUG(1, "%s\n", __func__);
 
         IRDA_ASSERT(self != NULL, return -1;);
 
@@ -1848,12 +1848,12 @@ static int __exit smsc_ircc_close(struct smsc_ircc_cb *self)
         smsc_ircc_stop_interrupts(self);
 
         /* Release the PORTS that this driver is using */
-        IRDA_DEBUG(0, "%s(), releasing 0x%03x\n",  __FUNCTION__,
+        IRDA_DEBUG(0, "%s(), releasing 0x%03x\n",  __func__,
                    self->io.fir_base);
 
         release_region(self->io.fir_base, self->io.fir_ext);
 
-        IRDA_DEBUG(0, "%s(), releasing 0x%03x\n", __FUNCTION__,
+        IRDA_DEBUG(0, "%s(), releasing 0x%03x\n", __func__,
                    self->io.sir_base);
 
         release_region(self->io.sir_base, self->io.sir_ext);
@@ -1875,7 +1875,7 @@ static void __exit smsc_ircc_cleanup(void)
 {
         int i;
 
-        IRDA_DEBUG(1, "%s\n", __FUNCTION__);
+        IRDA_DEBUG(1, "%s\n", __func__);
 
         for (i = 0; i < 2; i++) {
                 if (dev_self[i])
@@ -1899,7 +1899,7 @@ void smsc_ircc_sir_start(struct smsc_ircc_cb *self)
         struct net_device *dev;
         int fir_base, sir_base;
 
-        IRDA_DEBUG(3, "%s\n", __FUNCTION__);
+        IRDA_DEBUG(3, "%s\n", __func__);
 
         IRDA_ASSERT(self != NULL, return;);
         dev = self->netdev;
@@ -1926,7 +1926,7 @@ void smsc_ircc_sir_start(struct smsc_ircc_cb *self)
         /* Turn on interrups */
         outb(UART_IER_RLSI | UART_IER_RDI |UART_IER_THRI, sir_base + UART_IER);
 
-        IRDA_DEBUG(3, "%s() - exit\n", __FUNCTION__);
+        IRDA_DEBUG(3, "%s() - exit\n", __func__);
 
         outb(0x00, fir_base + IRCC_MASTER);
 }
@@ -1936,7 +1936,7 @@ void smsc_ircc_sir_stop(struct smsc_ircc_cb *self)
 {
         int iobase;
 
-        IRDA_DEBUG(3, "%s\n", __FUNCTION__);
+        IRDA_DEBUG(3, "%s\n", __func__);
         iobase = self->io.sir_base;
 
         /* Reset UART */
@@ -1962,7 +1962,7 @@ static void smsc_ircc_sir_write_wakeup(struct smsc_ircc_cb *self)
 
         IRDA_ASSERT(self != NULL, return;);
 
-        IRDA_DEBUG(4, "%s\n", __FUNCTION__);
+        IRDA_DEBUG(4, "%s\n", __func__);
 
         iobase = self->io.sir_base;
 
@@ -1984,7 +1984,7 @@ static void smsc_ircc_sir_write_wakeup(struct smsc_ircc_cb *self)
                  */
                 if (self->new_speed) {
                         IRDA_DEBUG(5, "%s(), Changing speed to %d.\n",
-                                   __FUNCTION__, self->new_speed);
+                                   __func__, self->new_speed);
                         smsc_ircc_sir_wait_hw_transmitter_finish(self);
                         smsc_ircc_change_speed(self, self->new_speed);
                         self->new_speed = 0;
@@ -2023,7 +2023,7 @@ static int smsc_ircc_sir_write(int iobase, int fifo_size, __u8 *buf, int len)
 
         /* Tx FIFO should be empty! */
         if (!(inb(iobase + UART_LSR) & UART_LSR_THRE)) {
-                IRDA_WARNING("%s(), failed, fifo not empty!\n", __FUNCTION__);
+                IRDA_WARNING("%s(), failed, fifo not empty!\n", __func__);
                 return 0;
         }
 
@@ -2123,7 +2123,7 @@ static void smsc_ircc_sir_wait_hw_transmitter_finish(struct smsc_ircc_cb *self)
                 udelay(1);
 
         if (count == 0)
-                IRDA_DEBUG(0, "%s(): stuck transmitter\n", __FUNCTION__);
+                IRDA_DEBUG(0, "%s(): stuck transmitter\n", __func__);
 }
 
 
@@ -2145,7 +2145,7 @@ static int __init smsc_ircc_look_for_chips(void)
         while (address->cfg_base) {
                 cfg_base = address->cfg_base;
 
-                /*printk(KERN_WARNING "%s(): probing: 0x%02x for: 0x%02x\n", __FUNCTION__, cfg_base, address->type);*/
+                /*printk(KERN_WARNING "%s(): probing: 0x%02x for: 0x%02x\n", __func__, cfg_base, address->type);*/
 
                 if (address->type & SMSCSIO_TYPE_FDC) {
                         type = "FDC";
@@ -2184,7 +2184,7 @@ static int __init smsc_superio_flat(const struct smsc_chip *chips, unsigned shor
         u8 mode, dma, irq;
         int ret = -ENODEV;
 
-        IRDA_DEBUG(1, "%s\n", __FUNCTION__);
+        IRDA_DEBUG(1, "%s\n", __func__);
 
         if (smsc_ircc_probe(cfgbase, SMSCSIOFLAT_DEVICEID_REG, chips, type) == NULL)
                 return ret;
@@ -2192,10 +2192,10 @@ static int __init smsc_superio_flat(const struct smsc_chip *chips, unsigned shor
         outb(SMSCSIOFLAT_UARTMODE0C_REG, cfgbase);
         mode = inb(cfgbase + 1);
 
-        /*printk(KERN_WARNING "%s(): mode: 0x%02x\n", __FUNCTION__, mode);*/
+        /*printk(KERN_WARNING "%s(): mode: 0x%02x\n", __func__, mode);*/
 
         if (!(mode & SMSCSIOFLAT_UART2MODE_VAL_IRDA))
-                IRDA_WARNING("%s(): IrDA not enabled\n", __FUNCTION__);
+                IRDA_WARNING("%s(): IrDA not enabled\n", __func__);
 
         outb(SMSCSIOFLAT_UART2BASEADDR_REG, cfgbase);
         sirbase = inb(cfgbase + 1) << 2;
@@ -2212,7 +2212,7 @@ static int __init smsc_superio_flat(const struct smsc_chip *chips, unsigned shor
         outb(SMSCSIOFLAT_UARTIRQSELECT_REG, cfgbase);
         irq = inb(cfgbase + 1) & SMSCSIOFLAT_UART2IRQSELECT_MASK;
 
-        IRDA_MESSAGE("%s(): fir: 0x%02x, sir: 0x%02x, dma: %02d, irq: %d, mode: 0x%02x\n", __FUNCTION__, firbase, sirbase, dma, irq, mode);
+        IRDA_MESSAGE("%s(): fir: 0x%02x, sir: 0x%02x, dma: %02d, irq: %d, mode: 0x%02x\n", __func__, firbase, sirbase, dma, irq, mode);
 
         if (firbase && smsc_ircc_open(firbase, sirbase, dma, irq) == 0)
                 ret = 0;
@@ -2234,7 +2234,7 @@ static int __init smsc_superio_paged(const struct smsc_chip *chips, unsigned sho
         unsigned short fir_io, sir_io;
         int ret = -ENODEV;
 
-        IRDA_DEBUG(1, "%s\n", __FUNCTION__);
+        IRDA_DEBUG(1, "%s\n", __func__);
 
         if (smsc_ircc_probe(cfg_base, 0x20, chips, type) == NULL)
                 return ret;
@@ -2268,7 +2268,7 @@ static int __init smsc_superio_paged(const struct smsc_chip *chips, unsigned sho
 
 static int __init smsc_access(unsigned short cfg_base, unsigned char reg)
 {
-        IRDA_DEBUG(1, "%s\n", __FUNCTION__);
+        IRDA_DEBUG(1, "%s\n", __func__);
 
         outb(reg, cfg_base);
         return inb(cfg_base) != reg ? -1 : 0;
@@ -2278,7 +2278,7 @@ static const struct smsc_chip * __init smsc_ircc_probe(unsigned short cfg_base,
 {
         u8 devid, xdevid, rev;
 
-        IRDA_DEBUG(1, "%s\n", __FUNCTION__);
+        IRDA_DEBUG(1, "%s\n", __func__);
 
         /* Leave configuration */
 
@@ -2353,7 +2353,7 @@ static int __init smsc_superio_fdc(unsigned short cfg_base)
 
         if (!request_region(cfg_base, 2, driver_name)) {
                 IRDA_WARNING("%s: can't get cfg_base of 0x%03x\n",
-                             __FUNCTION__, cfg_base);
+                             __func__, cfg_base);
         } else {
                 if (!smsc_superio_flat(fdc_chips_flat, cfg_base, "FDC") ||
                     !smsc_superio_paged(fdc_chips_paged, cfg_base, "FDC"))
@@ -2371,7 +2371,7 @@ static int __init smsc_superio_lpc(unsigned short cfg_base)
 
         if (!request_region(cfg_base, 2, driver_name)) {
                 IRDA_WARNING("%s: can't get cfg_base of 0x%03x\n",
-                             __FUNCTION__, cfg_base);
+                             __func__, cfg_base);
         } else {
                 if (!smsc_superio_flat(lpc_chips_flat, cfg_base, "LPC") ||
                     !smsc_superio_paged(lpc_chips_paged, cfg_base, "LPC"))
@@ -2932,7 +2932,7 @@ static void smsc_ircc_set_transceiver_smsc_ircc_atc(int fir_base, u32 speed)
                 /* empty */;
 
         if (val)
-                IRDA_WARNING("%s(): ATC: 0x%02x\n", __FUNCTION__,
+                IRDA_WARNING("%s(): ATC: 0x%02x\n", __func__,
                              inb(fir_base + IRCC_ATC));
 }
 
diff --git a/drivers/net/irda/tekram-sir.c b/drivers/net/irda/tekram-sir.c
index d1ce5ae6a172..048a15422844 100644
--- a/drivers/net/irda/tekram-sir.c
+++ b/drivers/net/irda/tekram-sir.c
@@ -77,7 +77,7 @@ static int tekram_open(struct sir_dev *dev)
 {
         struct qos_info *qos = &dev->qos;
 
-        IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+        IRDA_DEBUG(2, "%s()\n", __func__);
 
         sirdev_set_dtr_rts(dev, TRUE, TRUE);
 
@@ -92,7 +92,7 @@ static int tekram_open(struct sir_dev *dev)
 
 static int tekram_close(struct sir_dev *dev)
 {
-        IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+        IRDA_DEBUG(2, "%s()\n", __func__);
 
         /* Power off dongle */
         sirdev_set_dtr_rts(dev, FALSE, FALSE);
@@ -130,7 +130,7 @@ static int tekram_change_speed(struct sir_dev *dev, unsigned speed)
         u8 byte;
         static int ret = 0;
         
-        IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+        IRDA_DEBUG(2, "%s()\n", __func__);
 
         switch(state) {
         case SIRDEV_STATE_DONGLE_SPEED:
@@ -179,7 +179,7 @@ static int tekram_change_speed(struct sir_dev *dev, unsigned speed)
                 break;
 
         default:
-                IRDA_ERROR("%s - undefined state %d\n", __FUNCTION__, state);
+                IRDA_ERROR("%s - undefined state %d\n", __func__, state);
                 ret = -EINVAL;
                 break;
         }
@@ -204,7 +204,7 @@ static int tekram_change_speed(struct sir_dev *dev, unsigned speed)
 
 static int tekram_reset(struct sir_dev *dev)
 {
-        IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+        IRDA_DEBUG(2, "%s()\n", __func__);
 
         /* Clear DTR, Set RTS */
         sirdev_set_dtr_rts(dev, FALSE, TRUE); 
diff --git a/drivers/net/irda/toim3232-sir.c b/drivers/net/irda/toim3232-sir.c
index aa1a9b0ed83e..fcf287b749db 100644
--- a/drivers/net/irda/toim3232-sir.c
+++ b/drivers/net/irda/toim3232-sir.c
@@ -181,7 +181,7 @@ static int toim3232_open(struct sir_dev *dev)
 {
         struct qos_info *qos = &dev->qos;
 
-        IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+        IRDA_DEBUG(2, "%s()\n", __func__);
 
         /* Pull the lines high to start with.
          *
@@ -209,7 +209,7 @@ static int toim3232_open(struct sir_dev *dev)
 
 static int toim3232_close(struct sir_dev *dev)
 {
-        IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+        IRDA_DEBUG(2, "%s()\n", __func__);
 
         /* Power off dongle */
         sirdev_set_dtr_rts(dev, FALSE, FALSE);
@@ -241,7 +241,7 @@ static int toim3232_change_speed(struct sir_dev *dev, unsigned speed)
         u8 byte;
         static int ret = 0;
 
-        IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+        IRDA_DEBUG(2, "%s()\n", __func__);
 
         switch(state) {
         case SIRDEV_STATE_DONGLE_SPEED:
@@ -299,7 +299,7 @@ static int toim3232_change_speed(struct sir_dev *dev, unsigned speed)
                 break;
 
         default:
-                printk(KERN_ERR "%s - undefined state %d\n", __FUNCTION__, state);
+                printk(KERN_ERR "%s - undefined state %d\n", __func__, state);
                 ret = -EINVAL;
                 break;
         }
@@ -344,7 +344,7 @@ static int toim3232_change_speed(struct sir_dev *dev, unsigned speed)
 
 static int toim3232_reset(struct sir_dev *dev)
 {
-        IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+        IRDA_DEBUG(2, "%s()\n", __func__);
 
         /* Switch off both DTR and RTS to switch off dongle */
         sirdev_set_dtr_rts(dev, FALSE, FALSE);
diff --git a/drivers/net/irda/via-ircc.c b/drivers/net/irda/via-ircc.c
index 04ad3573b159..84e609ea5fbb 100644
--- a/drivers/net/irda/via-ircc.c
+++ b/drivers/net/irda/via-ircc.c
@@ -152,12 +152,12 @@ static int __init via_ircc_init(void)
 {
         int rc;
 
-        IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
+        IRDA_DEBUG(3, "%s()\n", __func__);
 
         rc = pci_register_driver(&via_driver);
         if (rc < 0) {
                 IRDA_DEBUG(0, "%s(): error rc = %d, returning  -ENODEV...\n",
-                           __FUNCTION__, rc);
+                           __func__, rc);
                 return -ENODEV;
         }
         return 0;
@@ -170,11 +170,11 @@ static int __devinit via_init_one (struct pci_dev *pcidev, const struct pci_devi
         u16 Chipset,FirDRQ1,FirDRQ0,FirIRQ,FirIOBase;
         chipio_t info;
 
-        IRDA_DEBUG(2, "%s(): Device ID=(0X%X)\n", __FUNCTION__, id->device);
+        IRDA_DEBUG(2, "%s(): Device ID=(0X%X)\n", __func__, id->device);
 
         rc = pci_enable_device (pcidev);
         if (rc) {
-                IRDA_DEBUG(0, "%s(): error rc = %d\n", __FUNCTION__, rc);
+                IRDA_DEBUG(0, "%s(): error rc = %d\n", __func__, rc);
                 return -ENODEV;
         }
 
@@ -185,7 +185,7 @@ static int __devinit via_init_one (struct pci_dev *pcidev, const struct pci_devi
                 Chipset=0x3076;
 
         if (Chipset==0x3076) {
-                IRDA_DEBUG(2, "%s(): Chipset = 3076\n", __FUNCTION__);
+                IRDA_DEBUG(2, "%s(): Chipset = 3076\n", __func__);
 
                 WriteLPCReg(7,0x0c );
                 temp=ReadLPCReg(0x30);//check if BIOS Enable Fir
@@ -222,7 +222,7 @@ static int __devinit via_init_one (struct pci_dev *pcidev, const struct pci_devi
                 } else
                         rc = -ENODEV; //IR not turn on   
         } else { //Not VT1211
-                IRDA_DEBUG(2, "%s(): Chipset = 3096\n", __FUNCTION__);
+                IRDA_DEBUG(2, "%s(): Chipset = 3096\n", __func__);
 
                 pci_read_config_byte(pcidev,0x67,&bTmp);//check if BIOS Enable Fir
                 if((bTmp&0x01)==1) {  // BIOS enable FIR
@@ -262,7 +262,7 @@ static int __devinit via_init_one (struct pci_dev *pcidev, const struct pci_devi
                         rc = -ENODEV; //IR not turn on !!!!!
         }//Not VT1211
 
-        IRDA_DEBUG(2, "%s(): End - rc = %d\n", __FUNCTION__, rc);
+        IRDA_DEBUG(2, "%s(): End - rc = %d\n", __func__, rc);
         return rc;
 }
 
@@ -276,7 +276,7 @@ static void via_ircc_clean(void)
 {
         int i;
 
-        IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
+        IRDA_DEBUG(3, "%s()\n", __func__);
 
         for (i=0; i < ARRAY_SIZE(dev_self); i++) {
                 if (dev_self[i])
@@ -286,7 +286,7 @@ static void via_ircc_clean(void)
 
 static void __devexit via_remove_one (struct pci_dev *pdev)
 {
-        IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
+        IRDA_DEBUG(3, "%s()\n", __func__);
 
         /* FIXME : This is ugly. We should use pci_get_drvdata(pdev);
          * to get our driver instance and call directly via_ircc_close().
@@ -301,7 +301,7 @@ static void __devexit via_remove_one (struct pci_dev *pdev)
 
 static void __exit via_ircc_cleanup(void)
 {
-        IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
+        IRDA_DEBUG(3, "%s()\n", __func__);
 
         /* FIXME : This should be redundant, as pci_unregister_driver()
          * should call via_remove_one() on each device.
@@ -324,7 +324,7 @@ static __devinit int via_ircc_open(int i, chipio_t * info, unsigned int id)
         struct via_ircc_cb *self;
         int err;
 
-        IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
+        IRDA_DEBUG(3, "%s()\n", __func__);
 
         if (i >= ARRAY_SIZE(dev_self))
                 return -ENOMEM;
@@ -360,7 +360,7 @@ static __devinit int via_ircc_open(int i, chipio_t * info, unsigned int id)
         /* Reserve the ioports that we need */
         if (!request_region(self->io.fir_base, self->io.fir_ext, driver_name)) {
                 IRDA_DEBUG(0, "%s(), can't get iobase of 0x%03x\n",
-                           __FUNCTION__, self->io.fir_base);
+                           __func__, self->io.fir_base);
                 err = -ENODEV;
                 goto err_out1;
         }
@@ -471,7 +471,7 @@ static int via_ircc_close(struct via_ircc_cb *self)
 {
         int iobase;
 
-        IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
+        IRDA_DEBUG(3, "%s()\n", __func__);
 
         IRDA_ASSERT(self != NULL, return -1;);
 
@@ -483,7 +483,7 @@ static int via_ircc_close(struct via_ircc_cb *self)
 
         /* Release the PORT that this driver is using */
         IRDA_DEBUG(2, "%s(), Releasing Region %03x\n",
-                   __FUNCTION__, self->io.fir_base);
+                   __func__, self->io.fir_base);
         release_region(self->io.fir_base, self->io.fir_ext);
         if (self->tx_buff.head)
                 dma_free_coherent(NULL, self->tx_buff.truesize,
@@ -509,7 +509,7 @@ static void via_hw_init(struct via_ircc_cb *self)
 {
         int iobase = self->io.fir_base;
 
-        IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
+        IRDA_DEBUG(3, "%s()\n", __func__);
 
         SetMaxRxPacketSize(iobase, 0x0fff);     //set to max:4095
         // FIFO Init
@@ -582,7 +582,7 @@ static void via_ircc_change_dongle_speed(int iobase, int speed,
         speed = speed;
 
         IRDA_DEBUG(1, "%s(): change_dongle_speed to %d for 0x%x, %d\n",
-                   __FUNCTION__, speed, iobase, dongle_id);
+                   __func__, speed, iobase, dongle_id);
 
         switch (dongle_id) {
 
@@ -671,7 +671,7 @@ static void via_ircc_change_dongle_speed(int iobase, int speed,
 
         case 0x11:              /* Temic TFDS4500 */
 
-                IRDA_DEBUG(2, "%s: Temic TFDS4500: One RX pin, TX normal, RX inverted.\n", __FUNCTION__);
+                IRDA_DEBUG(2, "%s: Temic TFDS4500: One RX pin, TX normal, RX inverted.\n", __func__);
 
                 UseOneRX(iobase, ON);   //use ONE RX....RX1
                 InvertTX(iobase, OFF);
@@ -689,7 +689,7 @@ static void via_ircc_change_dongle_speed(int iobase, int speed,
                         SlowIRRXLowActive(iobase, OFF);
 
                 } else{
-                        IRDA_DEBUG(0, "%s: Warning: TFDS4500 not running in SIR mode !\n", __FUNCTION__);
+                        IRDA_DEBUG(0, "%s: Warning: TFDS4500 not running in SIR mode !\n", __func__);
                 }
                 break;
 
@@ -707,7 +707,7 @@ static void via_ircc_change_dongle_speed(int iobase, int speed,
 
         default:
                 IRDA_ERROR("%s: Error: dongle_id %d unsupported !\n",
-                           __FUNCTION__, dongle_id);
+                           __func__, dongle_id);
         }
 }
 
@@ -726,7 +726,7 @@ static void via_ircc_change_speed(struct via_ircc_cb *self, __u32 speed)
         iobase = self->io.fir_base;
         /* Update accounting for new speed */
         self->io.speed = speed;
-        IRDA_DEBUG(1, "%s: change_speed to %d bps.\n", __FUNCTION__, speed);
+        IRDA_DEBUG(1, "%s: change_speed to %d bps.\n", __func__, speed);
 
         WriteReg(iobase, I_ST_CT_0, 0x0);
 
@@ -957,7 +957,7 @@ static int via_ircc_dma_xmit(struct via_ircc_cb *self, u16 iobase)
                         self->tx_buff.head) + self->tx_buff_dma,
                        self->tx_fifo.queue[self->tx_fifo.ptr].len, DMA_TX_MODE);
         IRDA_DEBUG(1, "%s: tx_fifo.ptr=%x,len=%x,tx_fifo.len=%x..\n",
-                   __FUNCTION__, self->tx_fifo.ptr,
+                   __func__, self->tx_fifo.ptr,
                    self->tx_fifo.queue[self->tx_fifo.ptr].len,
                    self->tx_fifo.len);
 
@@ -981,7 +981,7 @@ static int via_ircc_dma_xmit_complete(struct via_ircc_cb *self)
         int ret = TRUE;
         u8 Tx_status;
 
-        IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
+        IRDA_DEBUG(3, "%s()\n", __func__);
 
         iobase = self->io.fir_base;
         /* Disable DMA */
@@ -1014,7 +1014,7 @@ static int via_ircc_dma_xmit_complete(struct via_ircc_cb *self)
         }
         IRDA_DEBUG(1,
                    "%s: tx_fifo.len=%x ,tx_fifo.ptr=%x,tx_fifo.free=%x...\n",
-                   __FUNCTION__,
+                   __func__,
                    self->tx_fifo.len, self->tx_fifo.ptr, self->tx_fifo.free);
 /* F01_S
         // Any frames to be sent back-to-back? 
@@ -1050,7 +1050,7 @@ static int via_ircc_dma_receive(struct via_ircc_cb *self)
 
         iobase = self->io.fir_base;
 
-        IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
+        IRDA_DEBUG(3, "%s()\n", __func__);
 
         self->tx_fifo.len = self->tx_fifo.ptr = self->tx_fifo.free = 0;
         self->tx_fifo.tail = self->tx_buff.head;
@@ -1134,13 +1134,13 @@ static int via_ircc_dma_receive_complete(struct via_ircc_cb *self,
                         return TRUE;    //interrupt only, data maybe move by RxT  
                 if (((len - 4) < 2) || ((len - 4) > 2048)) {
                         IRDA_DEBUG(1, "%s(): Trouble:len=%x,CurCount=%x,LastCount=%x..\n",
-                                   __FUNCTION__, len, RxCurCount(iobase, self),
+                                   __func__, len, RxCurCount(iobase, self),
                                    self->RxLastCount);
                         hwreset(self);
                         return FALSE;
                 }
                 IRDA_DEBUG(2, "%s(): fifo.len=%x,len=%x,CurCount=%x..\n",
-                           __FUNCTION__,
+                           __func__,
                            st_fifo->len, len - 4, RxCurCount(iobase, self));
 
                 st_fifo->entries[st_fifo->tail].status = status;
@@ -1187,7 +1187,7 @@ F01_E */
                 skb_put(skb, len - 4);
 
                 skb_copy_to_linear_data(skb, self->rx_buff.data, len - 4);
-                IRDA_DEBUG(2, "%s(): len=%x.rx_buff=%p\n", __FUNCTION__,
+                IRDA_DEBUG(2, "%s(): len=%x.rx_buff=%p\n", __func__,
                            len - 4, self->rx_buff.data);
 
                 // Move to next frame 
@@ -1217,7 +1217,7 @@ static int upload_rxdata(struct via_ircc_cb *self, int iobase)
 
         len = GetRecvByte(iobase, self);
 
-        IRDA_DEBUG(2, "%s(): len=%x\n", __FUNCTION__, len);
+        IRDA_DEBUG(2, "%s(): len=%x\n", __func__, len);
 
         if ((len - 4) < 2) {
                 self->stats.rx_dropped++;
@@ -1302,7 +1302,7 @@ static int RxTimerHandler(struct via_ircc_cb *self, int iobase)
                         skb_put(skb, len - 4);
                         skb_copy_to_linear_data(skb, self->rx_buff.data, len - 4);
 
-                        IRDA_DEBUG(2, "%s(): len=%x.head=%x\n", __FUNCTION__,
+                        IRDA_DEBUG(2, "%s(): len=%x.head=%x\n", __func__,
                                    len - 4, st_fifo->head);
 
                         // Move to next frame 
@@ -1318,7 +1318,7 @@ static int RxTimerHandler(struct via_ircc_cb *self, int iobase)
 
                 IRDA_DEBUG(2,
                            "%s(): End of upload HostStatus=%x,RxStatus=%x\n",
-                           __FUNCTION__,
+                           __func__,
                            GetHostStatus(iobase), GetRXStatus(iobase));
 
                 /*
@@ -1358,7 +1358,7 @@ static irqreturn_t via_ircc_interrupt(int dummy, void *dev_id)
         iHostIntType = GetHostStatus(iobase);
 
         IRDA_DEBUG(4, "%s(): iHostIntType %02x:  %s %s %s  %02x\n",
-                   __FUNCTION__, iHostIntType,
+                   __func__, iHostIntType,
                    (iHostIntType & 0x40) ? "Timer" : "",
                    (iHostIntType & 0x20) ? "Tx" : "",
                    (iHostIntType & 0x10) ? "Rx" : "",
@@ -1388,7 +1388,7 @@ static irqreturn_t via_ircc_interrupt(int dummy, void *dev_id)
                 iTxIntType = GetTXStatus(iobase);
 
                 IRDA_DEBUG(4, "%s(): iTxIntType %02x:  %s %s %s %s\n",
-                           __FUNCTION__, iTxIntType,
+                           __func__, iTxIntType,
                            (iTxIntType & 0x08) ? "FIFO underr." : "",
                            (iTxIntType & 0x04) ? "EOM" : "",
                            (iTxIntType & 0x02) ? "FIFO ready" : "",
@@ -1412,7 +1412,7 @@ static irqreturn_t via_ircc_interrupt(int dummy, void *dev_id)
                 iRxIntType = GetRXStatus(iobase);
 
                 IRDA_DEBUG(4, "%s(): iRxIntType %02x:  %s %s %s %s %s %s %s\n",
-                           __FUNCTION__, iRxIntType,
+                           __func__, iRxIntType,
                            (iRxIntType & 0x80) ? "PHY err."     : "",
                            (iRxIntType & 0x40) ? "CRC err"      : "",
                            (iRxIntType & 0x20) ? "FIFO overr."  : "",
@@ -1421,7 +1421,7 @@ static irqreturn_t via_ircc_interrupt(int dummy, void *dev_id)
                            (iRxIntType & 0x02) ? "RxMaxLen"     : "",
                            (iRxIntType & 0x01) ? "SIR bad"      : "");
                 if (!iRxIntType)
-                        IRDA_DEBUG(3, "%s(): RxIRQ =0\n", __FUNCTION__);
+                        IRDA_DEBUG(3, "%s(): RxIRQ =0\n", __func__);
 
                 if (iRxIntType & 0x10) {
                         if (via_ircc_dma_receive_complete(self, iobase)) {
@@ -1431,7 +1431,7 @@ static irqreturn_t via_ircc_interrupt(int dummy, void *dev_id)
                 }               // No ERR     
                 else {          //ERR
                         IRDA_DEBUG(4, "%s(): RxIRQ ERR:iRxIntType=%x,HostIntType=%x,CurCount=%x,RxLastCount=%x_____\n",
-                                   __FUNCTION__, iRxIntType, iHostIntType,
+                                   __func__, iRxIntType, iHostIntType,
                                    RxCurCount(iobase, self),
                                    self->RxLastCount);
 
@@ -1456,7 +1456,7 @@ static void hwreset(struct via_ircc_cb *self)
         int iobase;
         iobase = self->io.fir_base;
 
-        IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
+        IRDA_DEBUG(3, "%s()\n", __func__);
 
         ResetChip(iobase, 5);
         EnableDMA(iobase, OFF);
@@ -1501,7 +1501,7 @@ static int via_ircc_is_receiving(struct via_ircc_cb *self)
         if (CkRxRecv(iobase, self))
                 status = TRUE;
 
-        IRDA_DEBUG(2, "%s(): status=%x....\n", __FUNCTION__, status);
+        IRDA_DEBUG(2, "%s(): status=%x....\n", __func__, status);
 
         return status;
 }
@@ -1519,7 +1519,7 @@ static int via_ircc_net_open(struct net_device *dev)
         int iobase;
         char hwname[32];
 
-        IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
+        IRDA_DEBUG(3, "%s()\n", __func__);
 
         IRDA_ASSERT(dev != NULL, return -1;);
         self = (struct via_ircc_cb *) dev->priv;
@@ -1586,7 +1586,7 @@ static int via_ircc_net_close(struct net_device *dev)
         struct via_ircc_cb *self;
         int iobase;
 
-        IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
+        IRDA_DEBUG(3, "%s()\n", __func__);
 
         IRDA_ASSERT(dev != NULL, return -1;);
         self = (struct via_ircc_cb *) dev->priv;
@@ -1630,7 +1630,7 @@ static int via_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq,
         IRDA_ASSERT(dev != NULL, return -1;);
         self = dev->priv;
         IRDA_ASSERT(self != NULL, return -1;);
-        IRDA_DEBUG(1, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__, dev->name,
+        IRDA_DEBUG(1, "%s(), %s, (cmd=0x%X)\n", __func__, dev->name,
                    cmd);
         /* Disable interrupts & save flags */
         spin_lock_irqsave(&self->lock, flags);
diff --git a/drivers/net/irda/vlsi_ir.c b/drivers/net/irda/vlsi_ir.c
index d15e00b8591e..18f4b3a96aed 100644
--- a/drivers/net/irda/vlsi_ir.c
+++ b/drivers/net/irda/vlsi_ir.c
@@ -140,15 +140,15 @@ static void vlsi_ring_debug(struct vlsi_ring *r)
         unsigned i;
 
         printk(KERN_DEBUG "%s - ring %p / size %u / mask 0x%04x / len %u / dir %d / hw %p\n",
-                __FUNCTION__, r, r->size, r->mask, r->len, r->dir, r->rd[0].hw);
-        printk(KERN_DEBUG "%s - head = %d / tail = %d\n", __FUNCTION__,
+                __func__, r, r->size, r->mask, r->len, r->dir, r->rd[0].hw);
+        printk(KERN_DEBUG "%s - head = %d / tail = %d\n", __func__,
                 atomic_read(&r->head) & r->mask, atomic_read(&r->tail) & r->mask);
         for (i = 0; i < r->size; i++) {
                 rd = &r->rd[i];
-                printk(KERN_DEBUG "%s - ring descr %u: ", __FUNCTION__, i);
+                printk(KERN_DEBUG "%s - ring descr %u: ", __func__, i);
                 printk("skb=%p data=%p hw=%p\n", rd->skb, rd->buf, rd->hw);
                 printk(KERN_DEBUG "%s - hw: status=%02x count=%u addr=0x%08x\n",
-                        __FUNCTION__, (unsigned) rd_get_status(rd),
+                        __func__, (unsigned) rd_get_status(rd),
                         (unsigned) rd_get_count(rd), (unsigned) rd_get_addr(rd));
         }
 }
@@ -435,7 +435,7 @@ static struct vlsi_ring *vlsi_alloc_ring(struct pci_dev *pdev, struct ring_descr
                     ||  !(busaddr = pci_map_single(pdev, rd->buf, len, dir))) {
                         if (rd->buf) {
                                 IRDA_ERROR("%s: failed to create PCI-MAP for %p",
-                                           __FUNCTION__, rd->buf);
+                                           __func__, rd->buf);
                                 kfree(rd->buf);
                                 rd->buf = NULL;
                         }
@@ -489,7 +489,7 @@ static int vlsi_create_hwif(vlsi_irda_dev_t *idev)
         ringarea = pci_alloc_consistent(idev->pdev, HW_RING_AREA_SIZE, &idev->busaddr);
         if (!ringarea) {
                 IRDA_ERROR("%s: insufficient memory for descriptor rings\n",
-                           __FUNCTION__);
+                           __func__);
                 goto out;
         }
         memset(ringarea, 0, HW_RING_AREA_SIZE);
@@ -564,7 +564,7 @@ static int vlsi_process_rx(struct vlsi_ring *r, struct ring_descr *rd)
         crclen = (idev->mode==IFF_FIR) ? sizeof(u32) : sizeof(u16);
         len -= crclen;          /* remove trailing CRC */
         if (len <= 0) {
-                IRDA_DEBUG(0, "%s: strange frame (len=%d)\n", __FUNCTION__, len);
+                IRDA_DEBUG(0, "%s: strange frame (len=%d)\n", __func__, len);
                 ret |= VLSI_RX_DROP;
                 goto done;
         }
@@ -579,14 +579,14 @@ static int vlsi_process_rx(struct vlsi_ring *r, struct ring_descr *rd)
                  */
                 le16_to_cpus(rd->buf+len);
                 if (irda_calc_crc16(INIT_FCS,rd->buf,len+crclen) != GOOD_FCS) {
-                        IRDA_DEBUG(0, "%s: crc error\n", __FUNCTION__);
+                        IRDA_DEBUG(0, "%s: crc error\n", __func__);
                         ret |= VLSI_RX_CRC;
                         goto done;
                 }
         }
 
         if (!rd->skb) {
-                IRDA_WARNING("%s: rx packet lost\n", __FUNCTION__);
+                IRDA_WARNING("%s: rx packet lost\n", __func__);
                 ret |= VLSI_RX_DROP;
                 goto done;
         }
@@ -617,7 +617,7 @@ static void vlsi_fill_rx(struct vlsi_ring *r)
         for (rd = ring_last(r); rd != NULL; rd = ring_put(r)) {
                 if (rd_is_active(rd)) {
                         IRDA_WARNING("%s: driver bug: rx descr race with hw\n",
-                                     __FUNCTION__);
+                                     __func__);
                         vlsi_ring_debug(r);
                         break;
                 }
@@ -676,7 +676,7 @@ static void vlsi_rx_interrupt(struct net_device *ndev)
 
         if (ring_first(r) == NULL) {
                 /* we are in big trouble, if this should ever happen */
-                IRDA_ERROR("%s: rx ring exhausted!\n", __FUNCTION__);
+                IRDA_ERROR("%s: rx ring exhausted!\n", __func__);
                 vlsi_ring_debug(r);
         }
         else
@@ -697,7 +697,7 @@ static void vlsi_unarm_rx(vlsi_irda_dev_t *idev)
                 if (rd_is_active(rd)) {
                         rd_set_status(rd, 0);
                         if (rd_get_count(rd)) {
-                                IRDA_DEBUG(0, "%s - dropping rx packet\n", __FUNCTION__);
+                                IRDA_DEBUG(0, "%s - dropping rx packet\n", __func__);
                                 ret = -VLSI_RX_DROP;
                         }
                         rd_set_count(rd, 0);
@@ -772,7 +772,7 @@ static int vlsi_set_baud(vlsi_irda_dev_t *idev, unsigned iobase)
         int     fifocnt;
 
         baudrate = idev->new_baud;
-        IRDA_DEBUG(2, "%s: %d -> %d\n", __FUNCTION__, idev->baud, idev->new_baud);
+        IRDA_DEBUG(2, "%s: %d -> %d\n", __func__, idev->baud, idev->new_baud);
         if (baudrate == 4000000) {
                 mode = IFF_FIR;
                 config = IRCFG_FIR;
@@ -789,7 +789,7 @@ static int vlsi_set_baud(vlsi_irda_dev_t *idev, unsigned iobase)
                 switch(baudrate) {
                         default:
                                 IRDA_WARNING("%s: undefined baudrate %d - fallback to 9600!\n",
-                                             __FUNCTION__, baudrate);
+                                             __func__, baudrate);
                                 baudrate = 9600;
                                 /* fallthru */
                         case 2400:
@@ -806,7 +806,7 @@ static int vlsi_set_baud(vlsi_irda_dev_t *idev, unsigned iobase)
 
         fifocnt = inw(iobase+VLSI_PIO_RCVBCNT) & RCVBCNT_MASK;
         if (fifocnt != 0) {
-                IRDA_DEBUG(0, "%s: rx fifo not empty(%d)\n", __FUNCTION__, fifocnt);
+                IRDA_DEBUG(0, "%s: rx fifo not empty(%d)\n", __func__, fifocnt);
         }
 
         outw(0, iobase+VLSI_PIO_IRENABLE);
@@ -830,14 +830,14 @@ static int vlsi_set_baud(vlsi_irda_dev_t *idev, unsigned iobase)
                 config ^= IRENABLE_SIR_ON;
 
         if (config != (IRENABLE_PHYANDCLOCK|IRENABLE_ENRXST)) {
-                IRDA_WARNING("%s: failed to set %s mode!\n", __FUNCTION__,
+                IRDA_WARNING("%s: failed to set %s mode!\n", __func__,
                         (mode==IFF_SIR)?"SIR":((mode==IFF_MIR)?"MIR":"FIR"));
                 ret = -1;
         }
         else {
                 if (inw(iobase+VLSI_PIO_PHYCTL) != nphyctl) {
                         IRDA_WARNING("%s: failed to apply baudrate %d\n",
-                                     __FUNCTION__, baudrate);
+                                     __func__, baudrate);
                         ret = -1;
                 }
                 else {
@@ -849,7 +849,7 @@ static int vlsi_set_baud(vlsi_irda_dev_t *idev, unsigned iobase)
         }
 
         if (ret)
-                vlsi_reg_debug(iobase,__FUNCTION__);
+                vlsi_reg_debug(iobase,__func__);
 
         return ret;
 }
@@ -982,7 +982,7 @@ static int vlsi_hard_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 
                 if (len >= r->len-5)
                          IRDA_WARNING("%s: possible buffer overflow with SIR wrapping!\n",
-                                      __FUNCTION__);
+                                      __func__);
         }
         else {
                 /* hw deals with MIR/FIR mode wrapping */
@@ -1027,7 +1027,7 @@ static int vlsi_hard_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 
                 fifocnt = inw(ndev->base_addr+VLSI_PIO_RCVBCNT) & RCVBCNT_MASK;
                 if (fifocnt != 0) {
-                        IRDA_DEBUG(0, "%s: rx fifo not empty(%d)\n", __FUNCTION__, fifocnt);
+                        IRDA_DEBUG(0, "%s: rx fifo not empty(%d)\n", __func__, fifocnt);
                 }
 
                 config = inw(iobase+VLSI_PIO_IRCFG);
@@ -1040,7 +1040,7 @@ static int vlsi_hard_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 
         if (ring_put(r) == NULL) {
                 netif_stop_queue(ndev);
-                IRDA_DEBUG(3, "%s: tx ring full - queue stopped\n", __FUNCTION__);
+                IRDA_DEBUG(3, "%s: tx ring full - queue stopped\n", __func__);
         }
         spin_unlock_irqrestore(&idev->lock, flags);
 
@@ -1049,7 +1049,7 @@ static int vlsi_hard_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 drop_unlock:
         spin_unlock_irqrestore(&idev->lock, flags);
 drop:
-        IRDA_WARNING("%s: dropping packet - %s\n", __FUNCTION__, msg);
+        IRDA_WARNING("%s: dropping packet - %s\n", __func__, msg);
         dev_kfree_skb_any(skb);
         idev->stats.tx_errors++;
         idev->stats.tx_dropped++;
@@ -1106,7 +1106,7 @@ static void vlsi_tx_interrupt(struct net_device *ndev)
                 fifocnt = inw(iobase+VLSI_PIO_RCVBCNT) & RCVBCNT_MASK;
                 if (fifocnt != 0) {
                         IRDA_DEBUG(0, "%s: rx fifo not empty(%d)\n",
-                                __FUNCTION__, fifocnt);
+                                __func__, fifocnt);
                 }
                 outw(config | IRCFG_ENTX, iobase+VLSI_PIO_IRCFG);
         }
@@ -1115,7 +1115,7 @@ static void vlsi_tx_interrupt(struct net_device *ndev)
 
         if (netif_queue_stopped(ndev)  &&  !idev->new_baud) {
                 netif_wake_queue(ndev);
-                IRDA_DEBUG(3, "%s: queue awoken\n", __FUNCTION__);
+                IRDA_DEBUG(3, "%s: queue awoken\n", __func__);
         }
 }
 
@@ -1138,7 +1138,7 @@ static void vlsi_unarm_tx(vlsi_irda_dev_t *idev)
                                 dev_kfree_skb_any(rd->skb);
                                 rd->skb = NULL;
                         }
-                        IRDA_DEBUG(0, "%s - dropping tx packet\n", __FUNCTION__);
+                        IRDA_DEBUG(0, "%s - dropping tx packet\n", __func__);
                         ret = -VLSI_TX_DROP;
                 }
                 else
@@ -1188,7 +1188,7 @@ static int vlsi_start_clock(struct pci_dev *pdev)
                 if (count < 3) {
                         if (clksrc == 1) { /* explicitly asked for PLL hence bail out */
                                 IRDA_ERROR("%s: no PLL or failed to lock!\n",
-                                           __FUNCTION__);
+                                           __func__);
                                 clkctl = CLKCTL_CLKSTP;
                                 pci_write_config_byte(pdev, VLSI_PCI_CLKCTL, clkctl);
                                 return -1;
@@ -1197,7 +1197,7 @@ static int vlsi_start_clock(struct pci_dev *pdev)
                                 clksrc = 3;     /* fallback to 40MHz XCLK (OB800) */
 
                         IRDA_DEBUG(0, "%s: PLL not locked, fallback to clksrc=%d\n",
-                                __FUNCTION__, clksrc);
+                                __func__, clksrc);
                 }
                 else
                         clksrc = 1;     /* got successful PLL lock */
@@ -1269,7 +1269,7 @@ static int vlsi_init_chip(struct pci_dev *pdev)
         /* start the clock and clean the registers */
 
         if (vlsi_start_clock(pdev)) {
-                IRDA_ERROR("%s: no valid clock source\n", __FUNCTION__);
+                IRDA_ERROR("%s: no valid clock source\n", __func__);
                 return -1;
         }
         iobase = ndev->base_addr;
@@ -1386,7 +1386,7 @@ static void vlsi_tx_timeout(struct net_device *ndev)
         vlsi_irda_dev_t *idev = ndev->priv;
 
 
-        vlsi_reg_debug(ndev->base_addr, __FUNCTION__);
+        vlsi_reg_debug(ndev->base_addr, __func__);
         vlsi_ring_debug(idev->tx_ring);
 
         if (netif_running(ndev))
@@ -1401,7 +1401,7 @@ static void vlsi_tx_timeout(struct net_device *ndev)
 
         if (vlsi_start_hw(idev))
                 IRDA_ERROR("%s: failed to restart hw - %s(%s) unusable!\n",
-                           __FUNCTION__, pci_name(idev->pdev), ndev->name);
+                           __func__, pci_name(idev->pdev), ndev->name);
         else
                 netif_start_queue(ndev);
 }
@@ -1446,7 +1446,7 @@ static int vlsi_ioctl(struct net_device *ndev, struct ifreq *rq, int cmd)
                         break;
                 default:
                         IRDA_WARNING("%s: notsupp - cmd=%04x\n",
-                                     __FUNCTION__, cmd);
+                                     __func__, cmd);
                         ret = -EOPNOTSUPP;
         }       
         
@@ -1491,7 +1491,7 @@ static irqreturn_t vlsi_interrupt(int irq, void *dev_instance)
 
         if (boguscount <= 0)
                 IRDA_MESSAGE("%s: too much work in interrupt!\n",
-                             __FUNCTION__);
+                             __func__);
         return IRQ_RETVAL(handled);
 }
 
@@ -1504,7 +1504,7 @@ static int vlsi_open(struct net_device *ndev)
         char    hwname[32];
 
         if (pci_request_regions(idev->pdev, drivername)) {
-                IRDA_WARNING("%s: io resource busy\n", __FUNCTION__);
+                IRDA_WARNING("%s: io resource busy\n", __func__);
                 goto errout;
         }
         ndev->base_addr = pci_resource_start(idev->pdev,0);
@@ -1519,7 +1519,7 @@ static int vlsi_open(struct net_device *ndev)
         if (request_irq(ndev->irq, vlsi_interrupt, IRQF_SHARED,
                         drivername, ndev)) {
                 IRDA_WARNING("%s: couldn't get IRQ: %d\n",
-                             __FUNCTION__, ndev->irq);
+                             __func__, ndev->irq);
                 goto errout_io;
         }
 
@@ -1540,7 +1540,7 @@ static int vlsi_open(struct net_device *ndev)
 
         netif_start_queue(ndev);
 
-        IRDA_MESSAGE("%s: device %s operational\n", __FUNCTION__, ndev->name);
+        IRDA_MESSAGE("%s: device %s operational\n", __func__, ndev->name);
 
         return 0;
 
@@ -1574,7 +1574,7 @@ static int vlsi_close(struct net_device *ndev)
 
         pci_release_regions(idev->pdev);
 
-        IRDA_MESSAGE("%s: device %s stopped\n", __FUNCTION__, ndev->name);
+        IRDA_MESSAGE("%s: device %s stopped\n", __func__, ndev->name);
 
         return 0;
 }
@@ -1593,7 +1593,7 @@ static int vlsi_irda_init(struct net_device *ndev)
 
         if (pci_set_dma_mask(pdev,DMA_MASK_USED_BY_HW)
             || pci_set_dma_mask(pdev,DMA_MASK_MSTRPAGE)) {
-                IRDA_ERROR("%s: aborting due to PCI BM-DMA address limitations\n", __FUNCTION__);
+                IRDA_ERROR("%s: aborting due to PCI BM-DMA address limitations\n", __func__);
                 return -1;
         }
 
@@ -1645,14 +1645,14 @@ vlsi_irda_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 
         if ( !pci_resource_start(pdev,0)
              || !(pci_resource_flags(pdev,0) & IORESOURCE_IO) ) {
-                IRDA_ERROR("%s: bar 0 invalid", __FUNCTION__);
+                IRDA_ERROR("%s: bar 0 invalid", __func__);
                 goto out_disable;
         }
 
         ndev = alloc_irdadev(sizeof(*idev));
         if (ndev==NULL) {
                 IRDA_ERROR("%s: Unable to allocate device memory.\n",
-                           __FUNCTION__);
+                           __func__);
                 goto out_disable;
         }
 
@@ -1667,7 +1667,7 @@ vlsi_irda_probe(struct pci_dev *pdev, const struct pci_device_id *id)
                 goto out_freedev;
 
         if (register_netdev(ndev) < 0) {
-                IRDA_ERROR("%s: register_netdev failed\n", __FUNCTION__);
+                IRDA_ERROR("%s: register_netdev failed\n", __func__);
                 goto out_freedev;
         }
 
@@ -1678,7 +1678,7 @@ vlsi_irda_probe(struct pci_dev *pdev, const struct pci_device_id *id)
                                        vlsi_proc_root, VLSI_PROC_FOPS, ndev);
                 if (!ent) {
                         IRDA_WARNING("%s: failed to create proc entry\n",
-                                     __FUNCTION__);
+                                     __func__);
                 } else {
                         ent->size = 0;
                 }
@@ -1745,7 +1745,7 @@ static int vlsi_irda_suspend(struct pci_dev *pdev, pm_message_t state)
 
         if (!ndev) {
                 IRDA_ERROR("%s - %s: no netdevice \n",
-                           __FUNCTION__, pci_name(pdev));
+                           __func__, pci_name(pdev));
                 return 0;
         }
         idev = ndev->priv;      
@@ -1756,7 +1756,7 @@ static int vlsi_irda_suspend(struct pci_dev *pdev, pm_message_t state)
                         pdev->current_state = state.event;
                 }
                 else
-                        IRDA_ERROR("%s - %s: invalid suspend request %u -> %u\n", __FUNCTION__, pci_name(pdev), pdev->current_state, state.event);
+                        IRDA_ERROR("%s - %s: invalid suspend request %u -> %u\n", __func__, pci_name(pdev), pdev->current_state, state.event);
                 mutex_unlock(&idev->mtx);
                 return 0;
         }
@@ -1784,7 +1784,7 @@ static int vlsi_irda_resume(struct pci_dev *pdev)
 
         if (!ndev) {
                 IRDA_ERROR("%s - %s: no netdevice \n",
-                           __FUNCTION__, pci_name(pdev));
+                           __func__, pci_name(pdev));
                 return 0;
         }
         idev = ndev->priv;      
@@ -1792,7 +1792,7 @@ static int vlsi_irda_resume(struct pci_dev *pdev)
         if (pdev->current_state == 0) {
                 mutex_unlock(&idev->mtx);
                 IRDA_WARNING("%s - %s: already resumed\n",
-                             __FUNCTION__, pci_name(pdev));
+                             __func__, pci_name(pdev));
                 return 0;
         }
         
@@ -1811,7 +1811,7 @@ static int vlsi_irda_resume(struct pci_dev *pdev)
                  * now we explicitly set pdev->current_state = 0 after enabling the
                  * device and independently resume_ok should catch any garbage config.
                  */
-                IRDA_WARNING("%s - hm, nothing to resume?\n", __FUNCTION__);
+                IRDA_WARNING("%s - hm, nothing to resume?\n", __func__);
                 mutex_unlock(&idev->mtx);
                 return 0;
         }
diff --git a/drivers/net/irda/vlsi_ir.h b/drivers/net/irda/vlsi_ir.h
index c8b9c74eea52..9b1884329fba 100644
--- a/drivers/net/irda/vlsi_ir.h
+++ b/drivers/net/irda/vlsi_ir.h
@@ -617,7 +617,7 @@ static inline void rd_set_addr_status(struct ring_descr *rd, dma_addr_t a, u8 s)
          */
 
         if ((a & ~DMA_MASK_MSTRPAGE)>>24 != MSTRPAGE_VALUE) {
-                IRDA_ERROR("%s: pci busaddr inconsistency!\n", __FUNCTION__);
+                IRDA_ERROR("%s: pci busaddr inconsistency!\n", __func__);
                 dump_stack();
                 return;
         }
diff --git a/drivers/net/irda/w83977af_ir.c b/drivers/net/irda/w83977af_ir.c
index 9fd2451b0fb2..002a6d769f21 100644
--- a/drivers/net/irda/w83977af_ir.c
+++ b/drivers/net/irda/w83977af_ir.c
@@ -114,7 +114,7 @@ static int __init w83977af_init(void)
 {
         int i;
 
-        IRDA_DEBUG(0, "%s()\n", __FUNCTION__ );
+        IRDA_DEBUG(0, "%s()\n", __func__ );
 
         for (i=0; (io[i] < 2000) && (i < ARRAY_SIZE(dev_self)); i++) {
                 if (w83977af_open(i, io[i], irq[i], dma[i]) == 0)
@@ -133,7 +133,7 @@ static void __exit w83977af_cleanup(void)
 {
         int i;
 
-        IRDA_DEBUG(4, "%s()\n", __FUNCTION__ );
+        IRDA_DEBUG(4, "%s()\n", __func__ );
 
         for (i=0; i < ARRAY_SIZE(dev_self); i++) {
                 if (dev_self[i])
@@ -154,12 +154,12 @@ int w83977af_open(int i, unsigned int iobase, unsigned int irq,
         struct w83977af_ir *self;
         int err;
 
-        IRDA_DEBUG(0, "%s()\n", __FUNCTION__ );
+        IRDA_DEBUG(0, "%s()\n", __func__ );
 
         /* Lock the port that we need */
         if (!request_region(iobase, CHIP_IO_EXTENT, driver_name)) {
                 IRDA_DEBUG(0, "%s(), can't get iobase of 0x%03x\n",
-                      __FUNCTION__ , iobase);
+                      __func__ , iobase);
                 return -ENODEV;
         }
 
@@ -241,7 +241,7 @@ int w83977af_open(int i, unsigned int iobase, unsigned int irq,
 
         err = register_netdev(dev);
         if (err) {
-                IRDA_ERROR("%s(), register_netdevice() failed!\n", __FUNCTION__);
+                IRDA_ERROR("%s(), register_netdevice() failed!\n", __func__);
                 goto err_out3;
         }
         IRDA_MESSAGE("IrDA: Registered device %s\n", dev->name);
@@ -273,7 +273,7 @@ static int w83977af_close(struct w83977af_ir *self)
 {
         int iobase;
 
-        IRDA_DEBUG(0, "%s()\n", __FUNCTION__ );
+        IRDA_DEBUG(0, "%s()\n", __func__ );
 
         iobase = self->io.fir_base;
 
@@ -294,7 +294,7 @@ static int w83977af_close(struct w83977af_ir *self)
 
         /* Release the PORT that this driver is using */
         IRDA_DEBUG(0 , "%s(), Releasing Region %03x\n", 
-              __FUNCTION__ , self->io.fir_base);
+              __func__ , self->io.fir_base);
         release_region(self->io.fir_base, self->io.fir_ext);
 
         if (self->tx_buff.head)
@@ -316,7 +316,7 @@ int w83977af_probe( int iobase, int irq, int dma)
         int i;
         
         for (i=0; i < 2; i++) {
-                IRDA_DEBUG( 0, "%s()\n", __FUNCTION__ );
+                IRDA_DEBUG( 0, "%s()\n", __func__ );
 #ifdef CONFIG_USE_W977_PNP
                 /* Enter PnP configuration mode */
                 w977_efm_enter(efbase[i]);
@@ -403,7 +403,7 @@ int w83977af_probe( int iobase, int irq, int dma)
                         return 0;
                 } else {
                         /* Try next extented function register address */
-                        IRDA_DEBUG( 0, "%s(), Wrong chip version", __FUNCTION__ );
+                        IRDA_DEBUG( 0, "%s(), Wrong chip version", __func__ );
                 }
         }       
         return -1;
@@ -439,19 +439,19 @@ void w83977af_change_speed(struct w83977af_ir *self, __u32 speed)
         case 115200: outb(0x01, iobase+ABLL); break;
         case 576000:
                 ir_mode = HCR_MIR_576;
-                IRDA_DEBUG(0, "%s(), handling baud of 576000\n", __FUNCTION__ );
+                IRDA_DEBUG(0, "%s(), handling baud of 576000\n", __func__ );
                 break;
         case 1152000:
                 ir_mode = HCR_MIR_1152;
-                IRDA_DEBUG(0, "%s(), handling baud of 1152000\n", __FUNCTION__ );
+                IRDA_DEBUG(0, "%s(), handling baud of 1152000\n", __func__ );
                 break;
         case 4000000:
                 ir_mode = HCR_FIR;
-                IRDA_DEBUG(0, "%s(), handling baud of 4000000\n", __FUNCTION__ );
+                IRDA_DEBUG(0, "%s(), handling baud of 4000000\n", __func__ );
                 break;
         default:
                 ir_mode = HCR_FIR;
-                IRDA_DEBUG(0, "%s(), unknown baud rate of %d\n", __FUNCTION__ , speed);
+                IRDA_DEBUG(0, "%s(), unknown baud rate of %d\n", __func__ , speed);
                 break;
         }
 
@@ -501,7 +501,7 @@ int w83977af_hard_xmit(struct sk_buff *skb, struct net_device *dev)
 
         iobase = self->io.fir_base;
 
-        IRDA_DEBUG(4, "%s(%ld), skb->len=%d\n", __FUNCTION__ , jiffies, 
+        IRDA_DEBUG(4, "%s(%ld), skb->len=%d\n", __func__ , jiffies,
                    (int) skb->len);
         
         /* Lock transmit buffer */
@@ -549,7 +549,7 @@ int w83977af_hard_xmit(struct sk_buff *skb, struct net_device *dev)
                         outb(ICR_ETMRI, iobase+ICR);
                 } else {
 #endif
-                        IRDA_DEBUG(4, "%s(%ld), mtt=%d\n", __FUNCTION__ , jiffies, mtt);
+                        IRDA_DEBUG(4, "%s(%ld), mtt=%d\n", __func__ , jiffies, mtt);
                         if (mtt)
                                 udelay(mtt);
 
@@ -591,7 +591,7 @@ static void w83977af_dma_write(struct w83977af_ir *self, int iobase)
         unsigned long flags;
         __u8 hcr;
 #endif
-        IRDA_DEBUG(4, "%s(), len=%d\n", __FUNCTION__ , self->tx_buff.len);
+        IRDA_DEBUG(4, "%s(), len=%d\n", __func__ , self->tx_buff.len);
 
         /* Save current set */
         set = inb(iobase+SSR);
@@ -643,7 +643,7 @@ static int w83977af_pio_write(int iobase, __u8 *buf, int len, int fifo_size)
         int actual = 0;
         __u8 set;
         
-        IRDA_DEBUG(4, "%s()\n", __FUNCTION__ );
+        IRDA_DEBUG(4, "%s()\n", __func__ );
 
         /* Save current bank */
         set = inb(iobase+SSR);
@@ -651,11 +651,11 @@ static int w83977af_pio_write(int iobase, __u8 *buf, int len, int fifo_size)
         switch_bank(iobase, SET0);
         if (!(inb_p(iobase+USR) & USR_TSRE)) {
                 IRDA_DEBUG(4,
-                           "%s(), warning, FIFO not empty yet!\n", __FUNCTION__  );
+                           "%s(), warning, FIFO not empty yet!\n", __func__  );
 
                 fifo_size -= 17;
                 IRDA_DEBUG(4, "%s(), %d bytes left in tx fifo\n", 
-                           __FUNCTION__ , fifo_size);
+                           __func__ , fifo_size);
         }
 
         /* Fill FIFO with current frame */
@@ -665,7 +665,7 @@ static int w83977af_pio_write(int iobase, __u8 *buf, int len, int fifo_size)
         }
         
         IRDA_DEBUG(4, "%s(), fifo_size %d ; %d sent of %d\n", 
-                   __FUNCTION__ , fifo_size, actual, len);
+                   __func__ , fifo_size, actual, len);
 
         /* Restore bank */
         outb(set, iobase+SSR);
@@ -685,7 +685,7 @@ static void w83977af_dma_xmit_complete(struct w83977af_ir *self)
         int iobase;
         __u8 set;
 
-        IRDA_DEBUG(4, "%s(%ld)\n", __FUNCTION__ , jiffies);
+        IRDA_DEBUG(4, "%s(%ld)\n", __func__ , jiffies);
 
         IRDA_ASSERT(self != NULL, return;);
 
@@ -700,7 +700,7 @@ static void w83977af_dma_xmit_complete(struct w83977af_ir *self)
         
         /* Check for underrrun! */
         if (inb(iobase+AUDR) & AUDR_UNDR) {
-                IRDA_DEBUG(0, "%s(), Transmit underrun!\n", __FUNCTION__ );
+                IRDA_DEBUG(0, "%s(), Transmit underrun!\n", __func__ );
                 
                 self->stats.tx_errors++;
                 self->stats.tx_fifo_errors++;
@@ -741,7 +741,7 @@ int w83977af_dma_receive(struct w83977af_ir *self)
 #endif
         IRDA_ASSERT(self != NULL, return -1;);
 
-        IRDA_DEBUG(4, "%s\n", __FUNCTION__ );
+        IRDA_DEBUG(4, "%s\n", __func__ );
 
         iobase= self->io.fir_base;
 
@@ -812,7 +812,7 @@ int w83977af_dma_receive_complete(struct w83977af_ir *self)
         __u8 set;
         __u8 status;
 
-        IRDA_DEBUG(4, "%s\n", __FUNCTION__ );
+        IRDA_DEBUG(4, "%s\n", __func__ );
 
         st_fifo = &self->st_fifo;
 
@@ -892,7 +892,7 @@ int w83977af_dma_receive_complete(struct w83977af_ir *self)
                         skb = dev_alloc_skb(len+1);
                         if (skb == NULL)  {
                                 printk(KERN_INFO
-                                       "%s(), memory squeeze, dropping frame.\n", __FUNCTION__);
+                                       "%s(), memory squeeze, dropping frame.\n", __func__);
                                 /* Restore set register */
                                 outb(set, iobase+SSR);
 
@@ -943,7 +943,7 @@ static void w83977af_pio_receive(struct w83977af_ir *self)
         __u8 byte = 0x00;
         int iobase;
 
-        IRDA_DEBUG(4, "%s()\n", __FUNCTION__ );
+        IRDA_DEBUG(4, "%s()\n", __func__ );
 
         IRDA_ASSERT(self != NULL, return;);
         
@@ -970,7 +970,7 @@ static __u8 w83977af_sir_interrupt(struct w83977af_ir *self, int isr)
         __u8 set;
         int iobase;
 
-        IRDA_DEBUG(4, "%s(), isr=%#x\n", __FUNCTION__ , isr);
+        IRDA_DEBUG(4, "%s(), isr=%#x\n", __func__ , isr);
         
         iobase = self->io.fir_base;
         /* Transmit FIFO low on data */
@@ -1007,7 +1007,7 @@ static __u8 w83977af_sir_interrupt(struct w83977af_ir *self, int isr)
                 /* Check if we need to change the speed? */
                 if (self->new_speed) {
                         IRDA_DEBUG(2,
-                                   "%s(), Changing speed!\n", __FUNCTION__ );
+                                   "%s(), Changing speed!\n", __func__ );
                         w83977af_change_speed(self, self->new_speed);
                         self->new_speed = 0;
                 }
@@ -1189,7 +1189,7 @@ static int w83977af_net_open(struct net_device *dev)
         char hwname[32];
         __u8 set;
         
-        IRDA_DEBUG(0, "%s()\n", __FUNCTION__ );
+        IRDA_DEBUG(0, "%s()\n", __func__ );
         
         IRDA_ASSERT(dev != NULL, return -1;);
         self = (struct w83977af_ir *) dev->priv;
@@ -1252,7 +1252,7 @@ static int w83977af_net_close(struct net_device *dev)
         int iobase;
         __u8 set;
 
-        IRDA_DEBUG(0, "%s()\n", __FUNCTION__ );
+        IRDA_DEBUG(0, "%s()\n", __func__ );
 
         IRDA_ASSERT(dev != NULL, return -1;);
         
@@ -1307,7 +1307,7 @@ static int w83977af_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 
         IRDA_ASSERT(self != NULL, return -1;);
 
-        IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__ , dev->name, cmd);
+        IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __func__ , dev->name, cmd);
         
         spin_lock_irqsave(&self->lock, flags);
 
diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c
index 8a97a0066a88..46819af3b062 100644
--- a/drivers/net/mv643xx_eth.c
+++ b/drivers/net/mv643xx_eth.c
@@ -55,7 +55,7 @@
 #include <asm/system.h>
 
 static char mv643xx_eth_driver_name[] = "mv643xx_eth";
-static char mv643xx_eth_driver_version[] = "1.1";
+static char mv643xx_eth_driver_version[] = "1.2";
 
 #define MV643XX_ETH_CHECKSUM_OFFLOAD_TX
 #define MV643XX_ETH_NAPI
@@ -90,12 +90,21 @@ static char mv643xx_eth_driver_version[] = "1.1";
 #define PORT_SERIAL_CONTROL(p)          (0x043c + ((p) << 10))
 #define PORT_STATUS(p)                  (0x0444 + ((p) << 10))
 #define  TX_FIFO_EMPTY                  0x00000400
+#define  TX_IN_PROGRESS                 0x00000080
+#define  PORT_SPEED_MASK                0x00000030
+#define  PORT_SPEED_1000                0x00000010
+#define  PORT_SPEED_100                 0x00000020
+#define  PORT_SPEED_10                  0x00000000
+#define  FLOW_CONTROL_ENABLED           0x00000008
+#define  FULL_DUPLEX                    0x00000004
+#define  LINK_UP                        0x00000002
 #define TXQ_COMMAND(p)                  (0x0448 + ((p) << 10))
 #define TXQ_FIX_PRIO_CONF(p)            (0x044c + ((p) << 10))
 #define TX_BW_RATE(p)                   (0x0450 + ((p) << 10))
 #define TX_BW_MTU(p)                    (0x0458 + ((p) << 10))
 #define TX_BW_BURST(p)                  (0x045c + ((p) << 10))
 #define INT_CAUSE(p)                    (0x0460 + ((p) << 10))
+#define  INT_TX_END_0                   0x00080000
 #define  INT_TX_END                     0x07f80000
 #define  INT_RX                         0x0007fbfc
 #define  INT_EXT                        0x00000002
@@ -127,21 +136,21 @@ static char mv643xx_eth_driver_version[] = "1.1";
 /*
  * SDMA configuration register.
  */
-#define RX_BURST_SIZE_4_64BIT           (2 << 1)
+#define RX_BURST_SIZE_16_64BIT          (4 << 1)
 #define BLM_RX_NO_SWAP                  (1 << 4)
 #define BLM_TX_NO_SWAP                  (1 << 5)
-#define TX_BURST_SIZE_4_64BIT           (2 << 22)
+#define TX_BURST_SIZE_16_64BIT          (4 << 22)
 
 #if defined(__BIG_ENDIAN)
 #define PORT_SDMA_CONFIG_DEFAULT_VALUE          \
-                RX_BURST_SIZE_4_64BIT   |       \
-                TX_BURST_SIZE_4_64BIT
+                RX_BURST_SIZE_16_64BIT  |       \
+                TX_BURST_SIZE_16_64BIT
 #elif defined(__LITTLE_ENDIAN)
 #define PORT_SDMA_CONFIG_DEFAULT_VALUE          \
-                RX_BURST_SIZE_4_64BIT   |       \
+                RX_BURST_SIZE_16_64BIT  |       \
                 BLM_RX_NO_SWAP          |       \
                 BLM_TX_NO_SWAP          |       \
-                TX_BURST_SIZE_4_64BIT
+                TX_BURST_SIZE_16_64BIT
 #else
 #error One of __BIG_ENDIAN or __LITTLE_ENDIAN must be defined
 #endif
@@ -153,9 +162,7 @@ static char mv643xx_eth_driver_version[] = "1.1";
 #define SET_MII_SPEED_TO_100                    (1 << 24)
 #define SET_GMII_SPEED_TO_1000                  (1 << 23)
 #define SET_FULL_DUPLEX_MODE                    (1 << 21)
-#define MAX_RX_PACKET_1522BYTE                  (1 << 17)
 #define MAX_RX_PACKET_9700BYTE                  (5 << 17)
-#define MAX_RX_PACKET_MASK                      (7 << 17)
 #define DISABLE_AUTO_NEG_SPEED_GMII             (1 << 13)
 #define DO_NOT_FORCE_LINK_FAIL                  (1 << 10)
 #define SERIAL_PORT_CONTROL_RESERVED            (1 << 9)
@@ -228,6 +235,8 @@ struct tx_desc {
 #define GEN_IP_V4_CHECKSUM              0x00040000
 #define GEN_TCP_UDP_CHECKSUM            0x00020000
 #define UDP_FRAME                       0x00010000
+#define MAC_HDR_EXTRA_4_BYTES           0x00008000
+#define MAC_HDR_EXTRA_8_BYTES           0x00000200
 
 #define TX_IHL_SHIFT                    11
 
@@ -404,6 +413,17 @@ static void rxq_disable(struct rx_queue *rxq)
                 udelay(10);
 }
 
+static void txq_reset_hw_ptr(struct tx_queue *txq)
+{
+        struct mv643xx_eth_private *mp = txq_to_mp(txq);
+        int off = TXQ_CURRENT_DESC_PTR(mp->port_num, txq->index);
+        u32 addr;
+
+        addr = (u32)txq->tx_desc_dma;
+        addr += txq->tx_curr_desc * sizeof(struct tx_desc);
+        wrl(mp, off, addr);
+}
+
 static void txq_enable(struct tx_queue *txq)
 {
         struct mv643xx_eth_private *mp = txq_to_mp(txq);
@@ -614,6 +634,12 @@ static int mv643xx_eth_poll(struct napi_struct *napi, int budget)
                 for (i = 0; i < 8; i++)
                         if (mp->txq_mask & (1 << i))
                                 txq_reclaim(mp->txq + i, 0);
+
+                if (netif_carrier_ok(mp->dev)) {
+                        spin_lock(&mp->lock);
+                        __txq_maybe_wake(mp->txq + mp->txq_primary);
+                        spin_unlock(&mp->lock);
+                }
         }
 #endif
 
@@ -706,6 +732,7 @@ static inline __be16 sum16_as_be(__sum16 sum)
 
 static void txq_submit_skb(struct tx_queue *txq, struct sk_buff *skb)
 {
+        struct mv643xx_eth_private *mp = txq_to_mp(txq);
         int nr_frags = skb_shinfo(skb)->nr_frags;
         int tx_index;
         struct tx_desc *desc;
@@ -732,12 +759,36 @@ static void txq_submit_skb(struct tx_queue *txq, struct sk_buff *skb)
         desc->buf_ptr = dma_map_single(NULL, skb->data, length, DMA_TO_DEVICE);
 
         if (skb->ip_summed == CHECKSUM_PARTIAL) {
-                BUG_ON(skb->protocol != htons(ETH_P_IP));
+                int mac_hdr_len;
+
+                BUG_ON(skb->protocol != htons(ETH_P_IP) &&
+                       skb->protocol != htons(ETH_P_8021Q));
 
                 cmd_sts |= GEN_TCP_UDP_CHECKSUM |
                            GEN_IP_V4_CHECKSUM   |
                            ip_hdr(skb)->ihl << TX_IHL_SHIFT;
 
+                mac_hdr_len = (void *)ip_hdr(skb) - (void *)skb->data;
+                switch (mac_hdr_len - ETH_HLEN) {
+                case 0:
+                        break;
+                case 4:
+                        cmd_sts |= MAC_HDR_EXTRA_4_BYTES;
+                        break;
+                case 8:
+                        cmd_sts |= MAC_HDR_EXTRA_8_BYTES;
+                        break;
+                case 12:
+                        cmd_sts |= MAC_HDR_EXTRA_4_BYTES;
+                        cmd_sts |= MAC_HDR_EXTRA_8_BYTES;
+                        break;
+                default:
+                        if (net_ratelimit())
+                                dev_printk(KERN_ERR, &txq_to_mp(txq)->dev->dev,
+                                   "mac header length is %d?!\n", mac_hdr_len);
+                        break;
+                }
+
                 switch (ip_hdr(skb)->protocol) {
                 case IPPROTO_UDP:
                         cmd_sts |= UDP_FRAME;
@@ -759,6 +810,10 @@ static void txq_submit_skb(struct tx_queue *txq, struct sk_buff *skb)
         wmb();
         desc->cmd_sts = cmd_sts;
 
+        /* clear TX_END interrupt status */
+        wrl(mp, INT_CAUSE(mp->port_num), ~(INT_TX_END_0 << txq->index));
+        rdl(mp, INT_CAUSE(mp->port_num));
+
         /* ensure all descriptors are written before poking hardware */
         wmb();
         txq_enable(txq);
@@ -1112,10 +1167,28 @@ static int mv643xx_eth_get_settings(struct net_device *dev, struct ethtool_cmd *
 
 static int mv643xx_eth_get_settings_phyless(struct net_device *dev, struct ethtool_cmd *cmd)
 {
+        struct mv643xx_eth_private *mp = netdev_priv(dev);
+        u32 port_status;
+
+        port_status = rdl(mp, PORT_STATUS(mp->port_num));
+
         cmd->supported = SUPPORTED_MII;
         cmd->advertising = ADVERTISED_MII;
-        cmd->speed = SPEED_1000;
-        cmd->duplex = DUPLEX_FULL;
+        switch (port_status & PORT_SPEED_MASK) {
+        case PORT_SPEED_10:
+                cmd->speed = SPEED_10;
+                break;
+        case PORT_SPEED_100:
+                cmd->speed = SPEED_100;
+                break;
+        case PORT_SPEED_1000:
+                cmd->speed = SPEED_1000;
+                break;
+        default:
+                cmd->speed = -1;
+                break;
+        }
+        cmd->duplex = (port_status & FULL_DUPLEX) ? DUPLEX_FULL : DUPLEX_HALF;
         cmd->port = PORT_MII;
         cmd->phy_address = 0;
         cmd->transceiver = XCVR_INTERNAL;
@@ -1539,8 +1612,11 @@ static int txq_init(struct mv643xx_eth_private *mp, int index)
 
         tx_desc = (struct tx_desc *)txq->tx_desc_area;
         for (i = 0; i < txq->tx_ring_size; i++) {
+                struct tx_desc *txd = tx_desc + i;
                 int nexti = (i + 1) % txq->tx_ring_size;
-                tx_desc[i].next_desc_ptr = txq->tx_desc_dma +
+
+                txd->cmd_sts = 0;
+                txd->next_desc_ptr = txq->tx_desc_dma +
                                         nexti * sizeof(struct tx_desc);
         }
 
@@ -1577,8 +1653,11 @@ static void txq_reclaim(struct tx_queue *txq, int force)
                 desc = &txq->tx_desc_area[tx_index];
                 cmd_sts = desc->cmd_sts;
 
-                if (!force && (cmd_sts & BUFFER_OWNED_BY_DMA))
-                        break;
+                if (cmd_sts & BUFFER_OWNED_BY_DMA) {
+                        if (!force)
+                                break;
+                        desc->cmd_sts = cmd_sts & ~BUFFER_OWNED_BY_DMA;
+                }
 
                 txq->tx_used_desc = (tx_index + 1) % txq->tx_ring_size;
                 txq->tx_desc_count--;
@@ -1632,49 +1711,61 @@ static void txq_deinit(struct tx_queue *txq)
 
 
 /* netdev ops and related ***************************************************/
-static void update_pscr(struct mv643xx_eth_private *mp, int speed, int duplex)
+static void handle_link_event(struct mv643xx_eth_private *mp)
 {
-        u32 pscr_o;
-        u32 pscr_n;
-
-        pscr_o = rdl(mp, PORT_SERIAL_CONTROL(mp->port_num));
+        struct net_device *dev = mp->dev;
+        u32 port_status;
+        int speed;
+        int duplex;
+        int fc;
+
+        port_status = rdl(mp, PORT_STATUS(mp->port_num));
+        if (!(port_status & LINK_UP)) {
+                if (netif_carrier_ok(dev)) {
+                        int i;
 
-        /* clear speed, duplex and rx buffer size fields */
-        pscr_n = pscr_o & ~(SET_MII_SPEED_TO_100   |
-                            SET_GMII_SPEED_TO_1000 |
-                            SET_FULL_DUPLEX_MODE   |
-                            MAX_RX_PACKET_MASK);
+                        printk(KERN_INFO "%s: link down\n", dev->name);
 
-        if (speed == SPEED_1000) {
-                pscr_n |= SET_GMII_SPEED_TO_1000 | MAX_RX_PACKET_9700BYTE;
-        } else {
-                if (speed == SPEED_100)
-                        pscr_n |= SET_MII_SPEED_TO_100;
-                pscr_n |= MAX_RX_PACKET_1522BYTE;
-        }
+                        netif_carrier_off(dev);
+                        netif_stop_queue(dev);
 
-        if (duplex == DUPLEX_FULL)
-                pscr_n |= SET_FULL_DUPLEX_MODE;
+                        for (i = 0; i < 8; i++) {
+                                struct tx_queue *txq = mp->txq + i;
 
-        if (pscr_n != pscr_o) {
-                if ((pscr_o & SERIAL_PORT_ENABLE) == 0)
-                        wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr_n);
-                else {
-                        int i;
+                                if (mp->txq_mask & (1 << i)) {
+                                        txq_reclaim(txq, 1);
+                                        txq_reset_hw_ptr(txq);
+                                }
+                        }
+                }
+                return;
+        }
 
-                        for (i = 0; i < 8; i++)
-                                if (mp->txq_mask & (1 << i))
-                                        txq_disable(mp->txq + i);
+        switch (port_status & PORT_SPEED_MASK) {
+        case PORT_SPEED_10:
+                speed = 10;
+                break;
+        case PORT_SPEED_100:
+                speed = 100;
+                break;
+        case PORT_SPEED_1000:
+                speed = 1000;
+                break;
+        default:
+                speed = -1;
+                break;
+        }
+        duplex = (port_status & FULL_DUPLEX) ? 1 : 0;
+        fc = (port_status & FLOW_CONTROL_ENABLED) ? 1 : 0;
 
-                        pscr_o &= ~SERIAL_PORT_ENABLE;
-                        wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr_o);
-                        wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr_n);
-                        wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr_n);
+        printk(KERN_INFO "%s: link up, %d Mb/s, %s duplex, "
+                         "flow control %sabled\n", dev->name,
+                         speed, duplex ? "full" : "half",
+                         fc ? "en" : "dis");
 
-                        for (i = 0; i < 8; i++)
-                                if (mp->txq_mask & (1 << i))
-                                        txq_enable(mp->txq + i);
-                }
+        if (!netif_carrier_ok(dev)) {
+                netif_carrier_on(dev);
+                netif_wake_queue(dev);
         }
 }
 
@@ -1684,7 +1775,6 @@ static irqreturn_t mv643xx_eth_irq(int irq, void *dev_id)
         struct mv643xx_eth_private *mp = netdev_priv(dev);
         u32 int_cause;
         u32 int_cause_ext;
-        u32 txq_active;
 
         int_cause = rdl(mp, INT_CAUSE(mp->port_num)) &
                         (INT_TX_END | INT_RX | INT_EXT);
@@ -1698,30 +1788,8 @@ static irqreturn_t mv643xx_eth_irq(int irq, void *dev_id)
                 wrl(mp, INT_CAUSE_EXT(mp->port_num), ~int_cause_ext);
         }
 
-        if (int_cause_ext & (INT_EXT_PHY | INT_EXT_LINK)) {
-                if (mp->phy_addr == -1 || mii_link_ok(&mp->mii)) {
-                        int i;
-
-                        if (mp->phy_addr != -1) {
-                                struct ethtool_cmd cmd;
-
-                                mii_ethtool_gset(&mp->mii, &cmd);
-                                update_pscr(mp, cmd.speed, cmd.duplex);
-                        }
-
-                        for (i = 0; i < 8; i++)
-                                if (mp->txq_mask & (1 << i))
-                                        txq_enable(mp->txq + i);
-
-                        if (!netif_carrier_ok(dev)) {
-                                netif_carrier_on(dev);
-                                __txq_maybe_wake(mp->txq + mp->txq_primary);
-                        }
-                } else if (netif_carrier_ok(dev)) {
-                        netif_stop_queue(dev);
-                        netif_carrier_off(dev);
-                }
-        }
+        if (int_cause_ext & (INT_EXT_PHY | INT_EXT_LINK))
+                handle_link_event(mp);
 
         /*
          * RxBuffer or RxError set for any of the 8 queues?
@@ -1743,8 +1811,6 @@ static irqreturn_t mv643xx_eth_irq(int irq, void *dev_id)
         }
 #endif
 
-        txq_active = rdl(mp, TXQ_COMMAND(mp->port_num));
-
         /*
          * TxBuffer or TxError set for any of the 8 queues?
          */
@@ -1754,6 +1820,16 @@ static irqreturn_t mv643xx_eth_irq(int irq, void *dev_id)
                 for (i = 0; i < 8; i++)
                         if (mp->txq_mask & (1 << i))
                                 txq_reclaim(mp->txq + i, 0);
+
+                /*
+                 * Enough space again in the primary TX queue for a
+                 * full packet?
+                 */
+                if (netif_carrier_ok(dev)) {
+                        spin_lock(&mp->lock);
+                        __txq_maybe_wake(mp->txq + mp->txq_primary);
+                        spin_unlock(&mp->lock);
+                }
         }
 
         /*
@@ -1763,19 +1839,25 @@ static irqreturn_t mv643xx_eth_irq(int irq, void *dev_id)
                 int i;
 
                 wrl(mp, INT_CAUSE(mp->port_num), ~(int_cause & INT_TX_END));
+
+                spin_lock(&mp->lock);
                 for (i = 0; i < 8; i++) {
                         struct tx_queue *txq = mp->txq + i;
-                        if (txq->tx_desc_count && !((txq_active >> i) & 1))
+                        u32 hw_desc_ptr;
+                        u32 expected_ptr;
+
+                        if ((int_cause & (INT_TX_END_0 << i)) == 0)
+                                continue;
+
+                        hw_desc_ptr =
+                                rdl(mp, TXQ_CURRENT_DESC_PTR(mp->port_num, i));
+                        expected_ptr = (u32)txq->tx_desc_dma +
+                                txq->tx_curr_desc * sizeof(struct tx_desc);
+
+                        if (hw_desc_ptr != expected_ptr)
                                 txq_enable(txq);
                 }
-        }
-
-        /*
-         * Enough space again in the primary TX queue for a full packet?
-         */
-        if (int_cause_ext & INT_EXT_TX) {
-                struct tx_queue *txq = mp->txq + mp->txq_primary;
-                __txq_maybe_wake(txq);
+                spin_unlock(&mp->lock);
         }
 
         return IRQ_HANDLED;
@@ -1785,14 +1867,14 @@ static void phy_reset(struct mv643xx_eth_private *mp)
 {
         unsigned int data;
 
-        smi_reg_read(mp, mp->phy_addr, 0, &data);
-        data |= 0x8000;
-        smi_reg_write(mp, mp->phy_addr, 0, data);
+        smi_reg_read(mp, mp->phy_addr, MII_BMCR, &data);
+        data |= BMCR_RESET;
+        smi_reg_write(mp, mp->phy_addr, MII_BMCR, data);
 
         do {
                 udelay(1);
-                smi_reg_read(mp, mp->phy_addr, 0, &data);
-        } while (data & 0x8000);
+                smi_reg_read(mp, mp->phy_addr, MII_BMCR, &data);
+        } while (data & BMCR_RESET);
 }
 
 static void port_start(struct mv643xx_eth_private *mp)
@@ -1801,23 +1883,6 @@ static void port_start(struct mv643xx_eth_private *mp)
         int i;
 
         /*
-         * Configure basic link parameters.
-         */
-        pscr = rdl(mp, PORT_SERIAL_CONTROL(mp->port_num));
-        pscr &= ~(SERIAL_PORT_ENABLE | FORCE_LINK_PASS);
-        wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr);
-        pscr |= DISABLE_AUTO_NEG_FOR_FLOW_CTRL |
-                DISABLE_AUTO_NEG_SPEED_GMII    |
-                DISABLE_AUTO_NEG_FOR_DUPLEX    |
-                DO_NOT_FORCE_LINK_FAIL         |
-                SERIAL_PORT_CONTROL_RESERVED;
-        wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr);
-        pscr |= SERIAL_PORT_ENABLE;
-        wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr);
-
-        wrl(mp, SDMA_CONFIG(mp->port_num), PORT_SDMA_CONFIG_DEFAULT_VALUE);
-
-        /*
          * Perform PHY reset, if there is a PHY.
          */
         if (mp->phy_addr != -1) {
@@ -1829,21 +1894,31 @@ static void port_start(struct mv643xx_eth_private *mp)
         }
 
         /*
+         * Configure basic link parameters.
+         */
+        pscr = rdl(mp, PORT_SERIAL_CONTROL(mp->port_num));
+
+        pscr |= SERIAL_PORT_ENABLE;
+        wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr);
+
+        pscr |= DO_NOT_FORCE_LINK_FAIL;
+        if (mp->phy_addr == -1)
+                pscr |= FORCE_LINK_PASS;
+        wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr);
+
+        wrl(mp, SDMA_CONFIG(mp->port_num), PORT_SDMA_CONFIG_DEFAULT_VALUE);
+
+        /*
          * Configure TX path and queues.
          */
         tx_set_rate(mp, 1000000000, 16777216);
         for (i = 0; i < 8; i++) {
                 struct tx_queue *txq = mp->txq + i;
-                int off = TXQ_CURRENT_DESC_PTR(mp->port_num, i);
-                u32 addr;
 
                 if ((mp->txq_mask & (1 << i)) == 0)
                         continue;
 
-                addr = (u32)txq->tx_desc_dma;
-                addr += txq->tx_curr_desc * sizeof(struct tx_desc);
-                wrl(mp, off, addr);
-
+                txq_reset_hw_ptr(txq);
                 txq_set_rate(txq, 1000000000, 16777216);
                 txq_set_fixed_prio_mode(txq);
         }
@@ -1965,6 +2040,9 @@ static int mv643xx_eth_open(struct net_device *dev)
         napi_enable(&mp->napi);
 #endif
 
+        netif_carrier_off(dev);
+        netif_stop_queue(dev);
+
         port_start(mp);
 
         set_rx_coal(mp, 0);
@@ -1999,8 +2077,14 @@ static void port_reset(struct mv643xx_eth_private *mp)
                 if (mp->txq_mask & (1 << i))
                         txq_disable(mp->txq + i);
         }
-        while (!(rdl(mp, PORT_STATUS(mp->port_num)) & TX_FIFO_EMPTY))
+
+        while (1) {
+                u32 ps = rdl(mp, PORT_STATUS(mp->port_num));
+
+                if ((ps & (TX_IN_PROGRESS | TX_FIFO_EMPTY)) == TX_FIFO_EMPTY)
+                        break;
                 udelay(10);
+        }
 
         /* Reset the Enable bit in the Configuration Register */
         data = rdl(mp, PORT_SERIAL_CONTROL(mp->port_num));
@@ -2202,7 +2286,8 @@ static int mv643xx_eth_shared_probe(struct platform_device *pdev)
         int ret;
 
         if (!mv643xx_eth_version_printed++)
-                printk(KERN_NOTICE "MV-643xx 10/100/1000 Ethernet Driver\n");
+                printk(KERN_NOTICE "MV-643xx 10/100/1000 ethernet "
+                        "driver version %s\n", mv643xx_eth_driver_version);
 
         ret = -EINVAL;
         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -2338,14 +2423,14 @@ static int phy_detect(struct mv643xx_eth_private *mp)
         unsigned int data;
         unsigned int data2;
 
-        smi_reg_read(mp, mp->phy_addr, 0, &data);
-        smi_reg_write(mp, mp->phy_addr, 0, data ^ 0x1000);
+        smi_reg_read(mp, mp->phy_addr, MII_BMCR, &data);
+        smi_reg_write(mp, mp->phy_addr, MII_BMCR, data ^ BMCR_ANENABLE);
 
-        smi_reg_read(mp, mp->phy_addr, 0, &data2);
-        if (((data ^ data2) & 0x1000) == 0)
+        smi_reg_read(mp, mp->phy_addr, MII_BMCR, &data2);
+        if (((data ^ data2) & BMCR_ANENABLE) == 0)
                 return -ENODEV;
 
-        smi_reg_write(mp, mp->phy_addr, 0, data);
+        smi_reg_write(mp, mp->phy_addr, MII_BMCR, data);
 
         return 0;
 }
@@ -2393,12 +2478,39 @@ static int phy_init(struct mv643xx_eth_private *mp,
                 cmd.duplex = pd->duplex;
         }
 
-        update_pscr(mp, cmd.speed, cmd.duplex);
         mv643xx_eth_set_settings(mp->dev, &cmd);
 
         return 0;
 }
 
+static void init_pscr(struct mv643xx_eth_private *mp, int speed, int duplex)
+{
+        u32 pscr;
+
+        pscr = rdl(mp, PORT_SERIAL_CONTROL(mp->port_num));
+        if (pscr & SERIAL_PORT_ENABLE) {
+                pscr &= ~SERIAL_PORT_ENABLE;
+                wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr);
+        }
+
+        pscr = MAX_RX_PACKET_9700BYTE | SERIAL_PORT_CONTROL_RESERVED;
+        if (mp->phy_addr == -1) {
+                pscr |= DISABLE_AUTO_NEG_SPEED_GMII;
+                if (speed == SPEED_1000)
+                        pscr |= SET_GMII_SPEED_TO_1000;
+                else if (speed == SPEED_100)
+                        pscr |= SET_MII_SPEED_TO_100;
+
+                pscr |= DISABLE_AUTO_NEG_FOR_FLOW_CTRL;
+
+                pscr |= DISABLE_AUTO_NEG_FOR_DUPLEX;
+                if (duplex == DUPLEX_FULL)
+                        pscr |= SET_FULL_DUPLEX_MODE;
+        }
+
+        wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr);
+}
+
 static int mv643xx_eth_probe(struct platform_device *pdev)
 {
         struct mv643xx_eth_platform_data *pd;
@@ -2452,6 +2564,7 @@ static int mv643xx_eth_probe(struct platform_device *pdev)
         } else {
                 SET_ETHTOOL_OPS(dev, &mv643xx_eth_ethtool_ops_phyless);
         }
+        init_pscr(mp, pd->speed, pd->duplex);
 
 
         res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
@@ -2478,6 +2591,7 @@ static int mv643xx_eth_probe(struct platform_device *pdev)
          * have to map the buffers to ISA memory which is only 16 MB
          */
         dev->features = NETIF_F_SG | NETIF_F_IP_CSUM;
+        dev->vlan_features = NETIF_F_SG | NETIF_F_IP_CSUM;
 #endif
 
         SET_NETDEV_DEV(dev, &pdev->dev);
diff --git a/drivers/net/ne.c b/drivers/net/ne.c
index 2fec6122c7fa..42443d697423 100644
--- a/drivers/net/ne.c
+++ b/drivers/net/ne.c
@@ -536,7 +536,7 @@ static int __init ne_probe1(struct net_device *dev, unsigned long ioaddr)
 #ifdef CONFIG_NET_POLL_CONTROLLER
         dev->poll_controller = eip_poll;
 #endif
-        NS8390_init(dev, 0);
+        NS8390p_init(dev, 0);
 
         ret = register_netdev(dev);
         if (ret)
@@ -794,7 +794,7 @@ retry:
                 if (time_after(jiffies, dma_start + 2*HZ/100)) {                /* 20ms */
                         printk(KERN_WARNING "%s: timeout waiting for Tx RDC.\n", dev->name);
                         ne_reset_8390(dev);
-                        NS8390_init(dev,1);
+                        NS8390p_init(dev, 1);
                         break;
                 }
 
@@ -855,7 +855,7 @@ static int ne_drv_resume(struct platform_device *pdev)
 
         if (netif_running(dev)) {
                 ne_reset_8390(dev);
-                NS8390_init(dev, 1);
+                NS8390p_init(dev, 1);
                 netif_device_attach(dev);
         }
         return 0;
diff --git a/drivers/net/niu.c b/drivers/net/niu.c
index 8ee7d7bb951b..e4765b713aba 100644
--- a/drivers/net/niu.c
+++ b/drivers/net/niu.c
@@ -6417,7 +6417,7 @@ static int niu_ethflow_to_class(int flow_type, u64 *class)
                 *class = CLASS_CODE_SCTP_IPV6;
                 break;
         default:
-                return -1;
+                return 0;
         }
 
         return 1;
diff --git a/drivers/net/ps3_gelic_wireless.c b/drivers/net/ps3_gelic_wireless.c
index 6b2dee0cf3a9..a834b52a6a2c 100644
--- a/drivers/net/ps3_gelic_wireless.c
+++ b/drivers/net/ps3_gelic_wireless.c
@@ -1024,7 +1024,7 @@ static int gelic_wl_set_encode(struct net_device *netdev,
         struct gelic_wl_info *wl = port_wl(netdev_priv(netdev));
         struct iw_point *enc = &data->encoding;
         __u16 flags;
-        unsigned int irqflag;
+        unsigned long irqflag;
         int key_index, index_specified;
         int ret = 0;
 
@@ -1097,7 +1097,7 @@ static int gelic_wl_get_encode(struct net_device *netdev,
 {
         struct gelic_wl_info *wl = port_wl(netdev_priv(netdev));
         struct iw_point *enc = &data->encoding;
-        unsigned int irqflag;
+        unsigned long irqflag;
         unsigned int key_index, index_specified;
         int ret = 0;
 
@@ -1215,7 +1215,7 @@ static int gelic_wl_set_encodeext(struct net_device *netdev,
         struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
         __u16 alg;
         __u16 flags;
-        unsigned int irqflag;
+        unsigned long irqflag;
         int key_index;
         int ret = 0;
 
@@ -1303,7 +1303,7 @@ static int gelic_wl_get_encodeext(struct net_device *netdev,
         struct gelic_wl_info *wl = port_wl(netdev_priv(netdev));
         struct iw_point *enc = &data->encoding;
         struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
-        unsigned int irqflag;
+        unsigned long irqflag;
         int key_index;
         int ret = 0;
         int max_key_len;
@@ -1426,7 +1426,7 @@ static int gelic_wl_priv_set_psk(struct net_device *net_dev,
 {
         struct gelic_wl_info *wl = port_wl(netdev_priv(net_dev));
         unsigned int len;
-        unsigned int irqflag;
+        unsigned long irqflag;
         int ret = 0;
 
         pr_debug("%s:<- len=%d\n", __func__, data->data.length);
@@ -1467,7 +1467,7 @@ static int gelic_wl_priv_get_psk(struct net_device *net_dev,
 {
         struct gelic_wl_info *wl = port_wl(netdev_priv(net_dev));
         char *p;
-        unsigned int irqflag;
+        unsigned long irqflag;
         unsigned int i;
 
         pr_debug("%s:<-\n", __func__);
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 86d77d05190a..a2b073097e5c 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -3143,7 +3143,7 @@ static void tx_intr_handler(struct fifo_info *fifo_data)
                 pkt_cnt++;
 
                 /* Updating the statistics block */
-                nic->stats.tx_bytes += skb->len;
+                nic->dev->stats.tx_bytes += skb->len;
                 nic->mac_control.stats_info->sw_stat.mem_freed += skb->truesize;
                 dev_kfree_skb_irq(skb);
 
@@ -4896,25 +4896,42 @@ static struct net_device_stats *s2io_get_stats(struct net_device *dev)
         /* Configure Stats for immediate updt */
         s2io_updt_stats(sp);
 
+        /* Using sp->stats as a staging area, because reset (due to mtu
+           change, for example) will clear some hardware counters */
+        dev->stats.tx_packets +=
+                le32_to_cpu(mac_control->stats_info->tmac_frms) - 
+                sp->stats.tx_packets;
         sp->stats.tx_packets =
                 le32_to_cpu(mac_control->stats_info->tmac_frms);
+        dev->stats.tx_errors +=
+                le32_to_cpu(mac_control->stats_info->tmac_any_err_frms) -
+                sp->stats.tx_errors;
         sp->stats.tx_errors =
                 le32_to_cpu(mac_control->stats_info->tmac_any_err_frms);
+        dev->stats.rx_errors +=
+                le64_to_cpu(mac_control->stats_info->rmac_drop_frms) -
+                sp->stats.rx_errors;
         sp->stats.rx_errors =
                 le64_to_cpu(mac_control->stats_info->rmac_drop_frms);
+        dev->stats.multicast =
+                le32_to_cpu(mac_control->stats_info->rmac_vld_mcst_frms) - 
+                sp->stats.multicast;
         sp->stats.multicast =
                 le32_to_cpu(mac_control->stats_info->rmac_vld_mcst_frms);
+        dev->stats.rx_length_errors =
+                le64_to_cpu(mac_control->stats_info->rmac_long_frms) - 
+                sp->stats.rx_length_errors;
         sp->stats.rx_length_errors =
                 le64_to_cpu(mac_control->stats_info->rmac_long_frms);
 
         /* collect per-ring rx_packets and rx_bytes */
-        sp->stats.rx_packets = sp->stats.rx_bytes = 0;
+        dev->stats.rx_packets = dev->stats.rx_bytes = 0;
         for (i = 0; i < config->rx_ring_num; i++) {
-                sp->stats.rx_packets += mac_control->rings[i].rx_packets;
-                sp->stats.rx_bytes += mac_control->rings[i].rx_bytes;
+                dev->stats.rx_packets += mac_control->rings[i].rx_packets;
+                dev->stats.rx_bytes += mac_control->rings[i].rx_bytes;
         }
 
-        return (&sp->stats);
+        return (&dev->stats);
 }
 
 /**
@@ -7419,7 +7436,7 @@ static int rx_osm_handler(struct ring_info *ring_data, struct RxD_t * rxdp)
                 if (err_mask != 0x5) {
                         DBG_PRINT(ERR_DBG, "%s: Rx error Value: 0x%x\n",
                                 dev->name, err_mask);
-                        sp->stats.rx_crc_errors++;
+                        dev->stats.rx_crc_errors++;
                         sp->mac_control.stats_info->sw_stat.mem_freed
                                 += skb->truesize;
                         dev_kfree_skb(skb);
diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c
index c69ba1395fa9..6a06b9503e4f 100644
--- a/drivers/net/sh_eth.c
+++ b/drivers/net/sh_eth.c
@@ -1,7 +1,7 @@
 /*
  *  SuperH Ethernet device driver
  *
- *  Copyright (C) 2006,2007 Nobuhiro Iwamatsu
+ *  Copyright (C) 2006-2008 Nobuhiro Iwamatsu
  *  Copyright (C) 2008 Renesas Solutions Corp.
  *
  *  This program is free software; you can redistribute it and/or modify it
@@ -143,13 +143,39 @@ static struct mdiobb_ops bb_ops = {
         .get_mdio_data = sh_get_mdio,
 };
 
+/* Chip Reset */
 static void sh_eth_reset(struct net_device *ndev)
 {
         u32 ioaddr = ndev->base_addr;
 
+#if defined(CONFIG_CPU_SUBTYPE_SH7763)
+        int cnt = 100;
+
+        ctrl_outl(EDSR_ENALL, ioaddr + EDSR);
+        ctrl_outl(ctrl_inl(ioaddr + EDMR) | EDMR_SRST, ioaddr + EDMR);
+        while (cnt > 0) {
+                if (!(ctrl_inl(ioaddr + EDMR) & 0x3))
+                        break;
+                mdelay(1);
+                cnt--;
+        }
+        if (cnt < 0)
+                printk(KERN_ERR "Device reset fail\n");
+
+        /* Table Init */
+        ctrl_outl(0x0, ioaddr + TDLAR);
+        ctrl_outl(0x0, ioaddr + TDFAR);
+        ctrl_outl(0x0, ioaddr + TDFXR);
+        ctrl_outl(0x0, ioaddr + TDFFR);
+        ctrl_outl(0x0, ioaddr + RDLAR);
+        ctrl_outl(0x0, ioaddr + RDFAR);
+        ctrl_outl(0x0, ioaddr + RDFXR);
+        ctrl_outl(0x0, ioaddr + RDFFR);
+#else
         ctrl_outl(ctrl_inl(ioaddr + EDMR) | EDMR_SRST, ioaddr + EDMR);
         mdelay(3);
         ctrl_outl(ctrl_inl(ioaddr + EDMR) & ~EDMR_SRST, ioaddr + EDMR);
+#endif
 }
 
 /* free skb and descriptor buffer */
@@ -180,6 +206,7 @@ static void sh_eth_ring_free(struct net_device *ndev)
 /* format skb and descriptor buffer */
 static void sh_eth_ring_format(struct net_device *ndev)
 {
+        u32 ioaddr = ndev->base_addr, reserve = 0;
         struct sh_eth_private *mdp = netdev_priv(ndev);
         int i;
         struct sk_buff *skb;
@@ -201,9 +228,15 @@ static void sh_eth_ring_format(struct net_device *ndev)
                 mdp->rx_skbuff[i] = skb;
                 if (skb == NULL)
                         break;
-                skb->dev = ndev;        /* Mark as being used by this device. */
+                skb->dev = ndev; /* Mark as being used by this device. */
+#if defined(CONFIG_CPU_SUBTYPE_SH7763)
+                reserve = SH7763_SKB_ALIGN
+                        - ((uint32_t)skb->data & (SH7763_SKB_ALIGN-1));
+                if (reserve)
+                        skb_reserve(skb, reserve);
+#else
                 skb_reserve(skb, RX_OFFSET);
-
+#endif
                 /* RX descriptor */
                 rxdesc = &mdp->rx_ring[i];
                 rxdesc->addr = (u32)skb->data & ~0x3UL;
@@ -211,12 +244,25 @@ static void sh_eth_ring_format(struct net_device *ndev)
 
                 /* The size of the buffer is 16 byte boundary. */
                 rxdesc->buffer_length = (mdp->rx_buf_sz + 16) & ~0x0F;
+                /* Rx descriptor address set */
+                if (i == 0) {
+                        ctrl_outl((u32)rxdesc, ioaddr + RDLAR);
+#if defined(CONFIG_CPU_SUBTYPE_SH7763)
+                        ctrl_outl((u32)rxdesc, ioaddr + RDFAR);
+#endif
+                }
         }
 
+        /* Rx descriptor address set */
+#if defined(CONFIG_CPU_SUBTYPE_SH7763)
+        ctrl_outl((u32)rxdesc, ioaddr + RDFXR);
+        ctrl_outl(0x1, ioaddr + RDFFR);
+#endif
+
         mdp->dirty_rx = (u32) (i - RX_RING_SIZE);
 
         /* Mark the last entry as wrapping the ring. */
-        rxdesc->status |= cpu_to_le32(RC_RDEL);
+        rxdesc->status |= cpu_to_le32(RD_RDEL);
 
         memset(mdp->tx_ring, 0, tx_ringsize);
 
@@ -226,8 +272,21 @@ static void sh_eth_ring_format(struct net_device *ndev)
                 txdesc = &mdp->tx_ring[i];
                 txdesc->status = cpu_to_le32(TD_TFP);
                 txdesc->buffer_length = 0;
+                if (i == 0) {
+                        /* Rx descriptor address set */
+                        ctrl_outl((u32)txdesc, ioaddr + TDLAR);
+#if defined(CONFIG_CPU_SUBTYPE_SH7763)
+                        ctrl_outl((u32)txdesc, ioaddr + TDFAR);
+#endif
+                }
         }
 
+        /* Rx descriptor address set */
+#if defined(CONFIG_CPU_SUBTYPE_SH7763)
+        ctrl_outl((u32)txdesc, ioaddr + TDFXR);
+        ctrl_outl(0x1, ioaddr + TDFFR);
+#endif
+
         txdesc->status |= cpu_to_le32(TD_TDLE);
 }
 
@@ -311,31 +370,43 @@ static int sh_eth_dev_init(struct net_device *ndev)
         /* Soft Reset */
         sh_eth_reset(ndev);
 
-        ctrl_outl(RPADIR_PADS1, ioaddr + RPADIR);       /* SH7712-DMA-RX-PAD2 */
+        /* Descriptor format */
+        sh_eth_ring_format(ndev);
+        ctrl_outl(RPADIR_INIT, ioaddr + RPADIR);
 
         /* all sh_eth int mask */
         ctrl_outl(0, ioaddr + EESIPR);
 
-        /* FIFO size set */
+#if defined(CONFIG_CPU_SUBTYPE_SH7763)
+        ctrl_outl(EDMR_EL, ioaddr + EDMR);
+#else
         ctrl_outl(0, ioaddr + EDMR);    /* Endian change */
+#endif
 
+        /* FIFO size set */
         ctrl_outl((FIFO_SIZE_T | FIFO_SIZE_R), ioaddr + FDR);
         ctrl_outl(0, ioaddr + TFTR);
 
+        /* Frame recv control */
         ctrl_outl(0, ioaddr + RMCR);
 
         rx_int_var = mdp->rx_int_var = DESC_I_RINT8 | DESC_I_RINT5;
         tx_int_var = mdp->tx_int_var = DESC_I_TINT2;
         ctrl_outl(rx_int_var | tx_int_var, ioaddr + TRSCER);
 
+#if defined(CONFIG_CPU_SUBTYPE_SH7763)
+        /* Burst sycle set */
+        ctrl_outl(0x800, ioaddr + BCULR);
+#endif
+
         ctrl_outl((FIFO_F_D_RFF | FIFO_F_D_RFD), ioaddr + FCFTR);
-        ctrl_outl(0, ioaddr + TRIMD);
 
-        /* Descriptor format */
-        sh_eth_ring_format(ndev);
+#if !defined(CONFIG_CPU_SUBTYPE_SH7763)
+        ctrl_outl(0, ioaddr + TRIMD);
+#endif
 
-        ctrl_outl((u32)mdp->rx_ring, ioaddr + RDLAR);
-        ctrl_outl((u32)mdp->tx_ring, ioaddr + TDLAR);
+        /* Recv frame limit set register */
+        ctrl_outl(RFLR_VALUE, ioaddr + RFLR);
 
         ctrl_outl(ctrl_inl(ioaddr + EESR), ioaddr + EESR);
         ctrl_outl((DMAC_M_RFRMER | DMAC_M_ECI | 0x003fffff), ioaddr + EESIPR);
@@ -345,21 +416,26 @@ static int sh_eth_dev_init(struct net_device *ndev)
                 ECMR_ZPF | (mdp->duplex ? ECMR_DM : 0) | ECMR_TE | ECMR_RE;
 
         ctrl_outl(val, ioaddr + ECMR);
-        ctrl_outl(ECSR_BRCRX | ECSR_PSRTO | ECSR_LCHNG | ECSR_ICD |
-                  ECSIPR_MPDIP, ioaddr + ECSR);
-        ctrl_outl(ECSIPR_BRCRXIP | ECSIPR_PSRTOIP | ECSIPR_LCHNGIP |
-                  ECSIPR_ICDIP | ECSIPR_MPDIP, ioaddr + ECSIPR);
+
+        /* E-MAC Status Register clear */
+        ctrl_outl(ECSR_INIT, ioaddr + ECSR);
+
+        /* E-MAC Interrupt Enable register */
+        ctrl_outl(ECSIPR_INIT, ioaddr + ECSIPR);
 
         /* Set MAC address */
         update_mac_address(ndev);
 
         /* mask reset */
-#if defined(CONFIG_CPU_SUBTYPE_SH7710)
+#if defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7763)
         ctrl_outl(APR_AP, ioaddr + APR);
         ctrl_outl(MPR_MP, ioaddr + MPR);
         ctrl_outl(TPAUSER_UNLIMITED, ioaddr + TPAUSER);
+#endif
+#if defined(CONFIG_CPU_SUBTYPE_SH7710)
         ctrl_outl(BCFR_UNLIMITED, ioaddr + BCFR);
 #endif
+
         /* Setting the Rx mode will start the Rx process. */
         ctrl_outl(EDRRR_R, ioaddr + EDRRR);
 
@@ -407,7 +483,7 @@ static int sh_eth_rx(struct net_device *ndev)
         int boguscnt = (mdp->dirty_rx + RX_RING_SIZE) - mdp->cur_rx;
         struct sk_buff *skb;
         u16 pkt_len = 0;
-        u32 desc_status;
+        u32 desc_status, reserve = 0;
 
         rxdesc = &mdp->rx_ring[entry];
         while (!(rxdesc->status & cpu_to_le32(RD_RACT))) {
@@ -454,28 +530,38 @@ static int sh_eth_rx(struct net_device *ndev)
         for (; mdp->cur_rx - mdp->dirty_rx > 0; mdp->dirty_rx++) {
                 entry = mdp->dirty_rx % RX_RING_SIZE;
                 rxdesc = &mdp->rx_ring[entry];
+                /* The size of the buffer is 16 byte boundary. */
+                rxdesc->buffer_length = (mdp->rx_buf_sz + 16) & ~0x0F;
+
                 if (mdp->rx_skbuff[entry] == NULL) {
                         skb = dev_alloc_skb(mdp->rx_buf_sz);
                         mdp->rx_skbuff[entry] = skb;
                         if (skb == NULL)
                                 break;  /* Better luck next round. */
                         skb->dev = ndev;
+#if defined(CONFIG_CPU_SUBTYPE_SH7763)
+                        reserve = SH7763_SKB_ALIGN
+                                - ((uint32_t)skb->data & (SH7763_SKB_ALIGN-1));
+                        if (reserve)
+                                skb_reserve(skb, reserve);
+#else
                         skb_reserve(skb, RX_OFFSET);
+#endif
+                        skb->ip_summed = CHECKSUM_NONE;
                         rxdesc->addr = (u32)skb->data & ~0x3UL;
                 }
-                /* The size of the buffer is 16 byte boundary. */
-                rxdesc->buffer_length = (mdp->rx_buf_sz + 16) & ~0x0F;
                 if (entry >= RX_RING_SIZE - 1)
                         rxdesc->status |=
-                        cpu_to_le32(RD_RACT | RD_RFP | RC_RDEL);
+                                cpu_to_le32(RD_RACT | RD_RFP | RD_RDEL);
                 else
                         rxdesc->status |=
-                        cpu_to_le32(RD_RACT | RD_RFP);
+                                cpu_to_le32(RD_RACT | RD_RFP);
         }
 
         /* Restart Rx engine if stopped. */
         /* If we don't need to check status, don't. -KDU */
-        ctrl_outl(EDRRR_R, ndev->base_addr + EDRRR);
+        if (!(ctrl_inl(ndev->base_addr + EDRRR) & EDRRR_R))
+                ctrl_outl(EDRRR_R, ndev->base_addr + EDRRR);
 
         return 0;
 }
@@ -529,13 +615,14 @@ static void sh_eth_error(struct net_device *ndev, int intr_status)
                         printk(KERN_ERR "Receive Frame Overflow\n");
                 }
         }
-
+#if !defined(CONFIG_CPU_SUBTYPE_SH7763)
         if (intr_status & EESR_ADE) {
                 if (intr_status & EESR_TDE) {
                         if (intr_status & EESR_TFE)
                                 mdp->stats.tx_fifo_errors++;
                 }
         }
+#endif
 
         if (intr_status & EESR_RDE) {
                 /* Receive Descriptor Empty int */
@@ -550,8 +637,11 @@ static void sh_eth_error(struct net_device *ndev, int intr_status)
                 mdp->stats.rx_fifo_errors++;
                 printk(KERN_ERR "Receive FIFO Overflow\n");
         }
-        if (intr_status &
-            (EESR_TWB | EESR_TABT | EESR_ADE | EESR_TDE | EESR_TFE)) {
+        if (intr_status & (EESR_TWB | EESR_TABT |
+#if !defined(CONFIG_CPU_SUBTYPE_SH7763)
+                        EESR_ADE |
+#endif
+                        EESR_TDE | EESR_TFE)) {
                 /* Tx error */
                 u32 edtrr = ctrl_inl(ndev->base_addr + EDTRR);
                 /* dmesg */
@@ -582,17 +672,23 @@ static irqreturn_t sh_eth_interrupt(int irq, void *netdev)
         ioaddr = ndev->base_addr;
         spin_lock(&mdp->lock);
 
+        /* Get interrpt stat */
         intr_status = ctrl_inl(ioaddr + EESR);
         /* Clear interrupt */
         ctrl_outl(intr_status, ioaddr + EESR);
 
-        if (intr_status & (EESR_FRC | EESR_RINT8 |
-                           EESR_RINT5 | EESR_RINT4 | EESR_RINT3 | EESR_RINT2 |
-                           EESR_RINT1))
+        if (intr_status & (EESR_FRC | /* Frame recv*/
+                        EESR_RMAF | /* Multi cast address recv*/
+                        EESR_RRF  | /* Bit frame recv */
+                        EESR_RTLF | /* Long frame recv*/
+                        EESR_RTSF | /* short frame recv */
+                        EESR_PRE  | /* PHY-LSI recv error */
+                        EESR_CERF)){ /* recv frame CRC error */
                 sh_eth_rx(ndev);
-        if (intr_status & (EESR_FTC |
-                           EESR_TINT4 | EESR_TINT3 | EESR_TINT2 | EESR_TINT1)) {
+        }
 
+        /* Tx Check */
+        if (intr_status & TX_CHECK) {
                 sh_eth_txfree(ndev);
                 netif_wake_queue(ndev);
         }
@@ -631,11 +727,32 @@ static void sh_eth_adjust_link(struct net_device *ndev)
                 if (phydev->duplex != mdp->duplex) {
                         new_state = 1;
                         mdp->duplex = phydev->duplex;
+#if defined(CONFIG_CPU_SUBTYPE_SH7763)
+                        if (mdp->duplex) { /*  FULL */
+                                ctrl_outl(ctrl_inl(ioaddr + ECMR) | ECMR_DM,
+                                                ioaddr + ECMR);
+                        } else {        /* Half */
+                                ctrl_outl(ctrl_inl(ioaddr + ECMR) & ~ECMR_DM,
+                                                ioaddr + ECMR);
+                        }
+#endif
                 }
 
                 if (phydev->speed != mdp->speed) {
                         new_state = 1;
                         mdp->speed = phydev->speed;
+#if defined(CONFIG_CPU_SUBTYPE_SH7763)
+                        switch (mdp->speed) {
+                        case 10: /* 10BASE */
+                                ctrl_outl(GECMR_10, ioaddr + GECMR); break;
+                        case 100:/* 100BASE */
+                                ctrl_outl(GECMR_100, ioaddr + GECMR); break;
+                        case 1000: /* 1000BASE */
+                                ctrl_outl(GECMR_1000, ioaddr + GECMR); break;
+                        default:
+                                break;
+                        }
+#endif
                 }
                 if (mdp->link == PHY_DOWN) {
                         ctrl_outl((ctrl_inl(ioaddr + ECMR) & ~ECMR_TXF)
@@ -730,7 +847,7 @@ static int sh_eth_open(struct net_device *ndev)
         /* Set the timer to check for link beat. */
         init_timer(&mdp->timer);
         mdp->timer.expires = (jiffies + (24 * HZ)) / 10;/* 2.4 sec. */
-        setup_timer(&mdp->timer, sh_eth_timer, ndev);
+        setup_timer(&mdp->timer, sh_eth_timer, (unsigned long)ndev);
 
         return ret;
 
@@ -820,7 +937,9 @@ static int sh_eth_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 
         mdp->cur_tx++;
 
-        ctrl_outl(EDTRR_TRNS, ndev->base_addr + EDTRR);
+        if (!(ctrl_inl(ndev->base_addr + EDTRR) & EDTRR_TRNS))
+                ctrl_outl(EDTRR_TRNS, ndev->base_addr + EDTRR);
+
         ndev->trans_start = jiffies;
 
         return 0;
@@ -877,9 +996,15 @@ static struct net_device_stats *sh_eth_get_stats(struct net_device *ndev)
         ctrl_outl(0, ioaddr + CDCR);    /* (write clear) */
         mdp->stats.tx_carrier_errors += ctrl_inl(ioaddr + LCCR);
         ctrl_outl(0, ioaddr + LCCR);    /* (write clear) */
+#if defined(CONFIG_CPU_SUBTYPE_SH7763)
+        mdp->stats.tx_carrier_errors += ctrl_inl(ioaddr + CERCR);/* CERCR */
+        ctrl_outl(0, ioaddr + CERCR);   /* (write clear) */
+        mdp->stats.tx_carrier_errors += ctrl_inl(ioaddr + CEECR);/* CEECR */
+        ctrl_outl(0, ioaddr + CEECR);   /* (write clear) */
+#else
         mdp->stats.tx_carrier_errors += ctrl_inl(ioaddr + CNDCR);
         ctrl_outl(0, ioaddr + CNDCR);   /* (write clear) */
-
+#endif
         return &mdp->stats;
 }
 
@@ -929,8 +1054,13 @@ static void sh_eth_tsu_init(u32 ioaddr)
         ctrl_outl(0, ioaddr + TSU_FWSL0);
         ctrl_outl(0, ioaddr + TSU_FWSL1);
         ctrl_outl(TSU_FWSLC_POSTENU | TSU_FWSLC_POSTENL, ioaddr + TSU_FWSLC);
+#if defined(CONFIG_CPU_SUBTYPE_SH7763)
+        ctrl_outl(0, ioaddr + TSU_QTAG0);       /* Disable QTAG(0->1) */
+        ctrl_outl(0, ioaddr + TSU_QTAG1);       /* Disable QTAG(1->0) */
+#else
         ctrl_outl(0, ioaddr + TSU_QTAGM0);      /* Disable QTAG(0->1) */
         ctrl_outl(0, ioaddr + TSU_QTAGM1);      /* Disable QTAG(1->0) */
+#endif
         ctrl_outl(0, ioaddr + TSU_FWSR);        /* all interrupt status clear */
         ctrl_outl(0, ioaddr + TSU_FWINMK);      /* Disable all interrupt */
         ctrl_outl(0, ioaddr + TSU_TEN); /* Disable all CAM entry */
@@ -1088,7 +1218,7 @@ static int sh_eth_drv_probe(struct platform_device *pdev)
         /* First device only init */
         if (!devno) {
                 /* reset device */
-                ctrl_outl(ARSTR_ARSTR, ndev->base_addr + ARSTR);
+                ctrl_outl(ARSTR_ARSTR, ARSTR);
                 mdelay(1);
 
                 /* TSU init (Init only)*/
@@ -1110,8 +1240,8 @@ static int sh_eth_drv_probe(struct platform_device *pdev)
                ndev->name, CARDNAME, (u32) ndev->base_addr);
 
         for (i = 0; i < 5; i++)
-                printk(KERN_INFO "%2.2x:", ndev->dev_addr[i]);
-        printk(KERN_INFO "%2.2x, IRQ %d.\n", ndev->dev_addr[i], ndev->irq);
+                printk(KERN_INFO "%02X:", ndev->dev_addr[i]);
+        printk(KERN_INFO "%02X, IRQ %d.\n", ndev->dev_addr[i], ndev->irq);
 
         platform_set_drvdata(pdev, ndev);
 
diff --git a/drivers/net/sh_eth.h b/drivers/net/sh_eth.h
index e01e1c347715..45ad1b09ca5a 100644
--- a/drivers/net/sh_eth.h
+++ b/drivers/net/sh_eth.h
@@ -32,118 +32,249 @@
 
 #define CARDNAME        "sh-eth"
 #define TX_TIMEOUT      (5*HZ)
-
-#define TX_RING_SIZE    128     /* Tx ring size */
-#define RX_RING_SIZE    128     /* Rx ring size */
-#define RX_OFFSET               2       /* skb offset */
+#define TX_RING_SIZE    64      /* Tx ring size */
+#define RX_RING_SIZE    64      /* Rx ring size */
 #define ETHERSMALL              60
 #define PKT_BUF_SZ              1538
 
+#ifdef CONFIG_CPU_SUBTYPE_SH7763
+
+#define SH7763_SKB_ALIGN 32
 /* Chip Base Address */
-#define SH_TSU_ADDR 0xA7000804
+# define SH_TSU_ADDR  0xFFE01800
+# define ARSTR            0xFFE01800
+
+/* Chip Registers */
+/* E-DMAC */
+# define EDSR    0x000
+# define EDMR    0x400
+# define EDTRR   0x408
+# define EDRRR   0x410
+# define EESR    0x428
+# define EESIPR  0x430
+# define TDLAR   0x010
+# define TDFAR   0x014
+# define TDFXR   0x018
+# define TDFFR   0x01C
+# define RDLAR   0x030
+# define RDFAR   0x034
+# define RDFXR   0x038
+# define RDFFR   0x03C
+# define TRSCER  0x438
+# define RMFCR   0x440
+# define TFTR    0x448
+# define FDR     0x450
+# define RMCR    0x458
+# define RPADIR  0x460
+# define FCFTR   0x468
+
+/* Ether Register */
+# define ECMR    0x500
+# define ECSR    0x510
+# define ECSIPR  0x518
+# define PIR     0x520
+# define PSR     0x528
+# define PIPR    0x52C
+# define RFLR    0x508
+# define APR     0x554
+# define MPR     0x558
+# define PFTCR   0x55C
+# define PFRCR   0x560
+# define TPAUSER 0x564
+# define GECMR   0x5B0
+# define BCULR   0x5B4
+# define MAHR    0x5C0
+# define MALR    0x5C8
+# define TROCR   0x700
+# define CDCR    0x708
+# define LCCR    0x710
+# define CEFCR   0x740
+# define FRECR   0x748
+# define TSFRCR  0x750
+# define TLFRCR  0x758
+# define RFCR    0x760
+# define CERCR   0x768
+# define CEECR   0x770
+# define MAFCR   0x778
+
+/* TSU Absolute Address */
+# define TSU_CTRST       0x004
+# define TSU_FWEN0       0x010
+# define TSU_FWEN1       0x014
+# define TSU_FCM         0x18
+# define TSU_BSYSL0      0x20
+# define TSU_BSYSL1      0x24
+# define TSU_PRISL0      0x28
+# define TSU_PRISL1      0x2C
+# define TSU_FWSL0       0x30
+# define TSU_FWSL1       0x34
+# define TSU_FWSLC       0x38
+# define TSU_QTAG0       0x40
+# define TSU_QTAG1       0x44
+# define TSU_FWSR        0x50
+# define TSU_FWINMK      0x54
+# define TSU_ADQT0       0x48
+# define TSU_ADQT1       0x4C
+# define TSU_VTAG0       0x58
+# define TSU_VTAG1       0x5C
+# define TSU_ADSBSY      0x60
+# define TSU_TEN         0x64
+# define TSU_POST1       0x70
+# define TSU_POST2       0x74
+# define TSU_POST3       0x78
+# define TSU_POST4       0x7C
+# define TSU_ADRH0       0x100
+# define TSU_ADRL0       0x104
+# define TSU_ADRH31      0x1F8
+# define TSU_ADRL31      0x1FC
+
+# define TXNLCR0         0x80
+# define TXALCR0         0x84
+# define RXNLCR0         0x88
+# define RXALCR0         0x8C
+# define FWNLCR0         0x90
+# define FWALCR0         0x94
+# define TXNLCR1         0xA0
+# define TXALCR1         0xA4
+# define RXNLCR1         0xA8
+# define RXALCR1         0xAC
+# define FWNLCR1         0xB0
+# define FWALCR1         0x40
+
+#else /* CONFIG_CPU_SUBTYPE_SH7763 */
+# define RX_OFFSET 2    /* skb offset */
+/* Chip base address */
+# define SH_TSU_ADDR  0xA7000804
+# define ARSTR            0xA7000800
 
 /* Chip Registers */
 /* E-DMAC */
-#define EDMR    0x0000
-#define EDTRR   0x0004
-#define EDRRR   0x0008
-#define TDLAR   0x000C
-#define RDLAR   0x0010
-#define EESR    0x0014
-#define EESIPR  0x0018
-#define TRSCER  0x001C
-#define RMFCR   0x0020
-#define TFTR    0x0024
-#define FDR             0x0028
-#define RMCR    0x002C
-#define EDOCR   0x0030
-#define FCFTR   0x0034
-#define RPADIR  0x0038
-#define TRIMD   0x003C
-#define RBWAR   0x0040
-#define RDFAR   0x0044
-#define TBRAR   0x004C
-#define TDFAR   0x0050
+# define EDMR   0x0000
+# define EDTRR  0x0004
+# define EDRRR  0x0008
+# define TDLAR  0x000C
+# define RDLAR  0x0010
+# define EESR   0x0014
+# define EESIPR 0x0018
+# define TRSCER 0x001C
+# define RMFCR  0x0020
+# define TFTR   0x0024
+# define FDR    0x0028
+# define RMCR   0x002C
+# define EDOCR  0x0030
+# define FCFTR  0x0034
+# define RPADIR 0x0038
+# define TRIMD  0x003C
+# define RBWAR  0x0040
+# define RDFAR  0x0044
+# define TBRAR  0x004C
+# define TDFAR  0x0050
+
 /* Ether Register */
-#define ECMR    0x0160
-#define ECSR    0x0164
-#define ECSIPR  0x0168
-#define PIR             0x016C
-#define MAHR    0x0170
-#define MALR    0x0174
-#define RFLR    0x0178
-#define PSR             0x017C
-#define TROCR   0x0180
-#define CDCR    0x0184
-#define LCCR    0x0188
-#define CNDCR   0x018C
-#define CEFCR   0x0194
-#define FRECR   0x0198
-#define TSFRCR  0x019C
-#define TLFRCR  0x01A0
-#define RFCR    0x01A4
-#define MAFCR   0x01A8
-#define IPGR    0x01B4
-#if defined(CONFIG_CPU_SUBTYPE_SH7710)
-#define APR             0x01B8
-#define MPR     0x01BC
-#define TPAUSER 0x1C4
-#define BCFR    0x1CC
-#endif /* CONFIG_CPU_SH7710 */
-
-#define ARSTR   0x0800
+# define ECMR   0x0160
+# define ECSR   0x0164
+# define ECSIPR 0x0168
+# define PIR    0x016C
+# define MAHR   0x0170
+# define MALR   0x0174
+# define RFLR   0x0178
+# define PSR    0x017C
+# define TROCR  0x0180
+# define CDCR   0x0184
+# define LCCR   0x0188
+# define CNDCR  0x018C
+# define CEFCR  0x0194
+# define FRECR  0x0198
+# define TSFRCR 0x019C
+# define TLFRCR 0x01A0
+# define RFCR   0x01A4
+# define MAFCR  0x01A8
+# define IPGR   0x01B4
+# if defined(CONFIG_CPU_SUBTYPE_SH7710)
+# define APR    0x01B8
+# define MPR    0x01BC
+# define TPAUSER 0x1C4
+# define BCFR   0x1CC
+# endif /* CONFIG_CPU_SH7710 */
 
 /* TSU */
-#define TSU_CTRST       0x004
-#define TSU_FWEN0       0x010
-#define TSU_FWEN1       0x014
-#define TSU_FCM         0x018
-#define TSU_BSYSL0      0x020
-#define TSU_BSYSL1      0x024
-#define TSU_PRISL0      0x028
-#define TSU_PRISL1      0x02C
-#define TSU_FWSL0       0x030
-#define TSU_FWSL1       0x034
-#define TSU_FWSLC       0x038
-#define TSU_QTAGM0      0x040
-#define TSU_QTAGM1      0x044
-#define TSU_ADQT0       0x048
-#define TSU_ADQT1       0x04C
-#define TSU_FWSR        0x050
-#define TSU_FWINMK      0x054
-#define TSU_ADSBSY      0x060
-#define TSU_TEN         0x064
-#define TSU_POST1       0x070
-#define TSU_POST2       0x074
-#define TSU_POST3       0x078
-#define TSU_POST4       0x07C
-#define TXNLCR0         0x080
-#define TXALCR0         0x084
-#define RXNLCR0         0x088
-#define RXALCR0         0x08C
-#define FWNLCR0         0x090
-#define FWALCR0         0x094
-#define TXNLCR1         0x0A0
-#define TXALCR1         0x0A4
-#define RXNLCR1         0x0A8
-#define RXALCR1         0x0AC
-#define FWNLCR1         0x0B0
-#define FWALCR1         0x0B4
+# define TSU_CTRST      0x004
+# define TSU_FWEN0      0x010
+# define TSU_FWEN1      0x014
+# define TSU_FCM        0x018
+# define TSU_BSYSL0     0x020
+# define TSU_BSYSL1     0x024
+# define TSU_PRISL0     0x028
+# define TSU_PRISL1     0x02C
+# define TSU_FWSL0      0x030
+# define TSU_FWSL1      0x034
+# define TSU_FWSLC      0x038
+# define TSU_QTAGM0     0x040
+# define TSU_QTAGM1     0x044
+# define TSU_ADQT0      0x048
+# define TSU_ADQT1      0x04C
+# define TSU_FWSR       0x050
+# define TSU_FWINMK     0x054
+# define TSU_ADSBSY     0x060
+# define TSU_TEN        0x064
+# define TSU_POST1      0x070
+# define TSU_POST2      0x074
+# define TSU_POST3      0x078
+# define TSU_POST4      0x07C
+# define TXNLCR0        0x080
+# define TXALCR0        0x084
+# define RXNLCR0        0x088
+# define RXALCR0        0x08C
+# define FWNLCR0        0x090
+# define FWALCR0        0x094
+# define TXNLCR1        0x0A0
+# define TXALCR1        0x0A4
+# define RXNLCR1        0x0A8
+# define RXALCR1        0x0AC
+# define FWNLCR1        0x0B0
+# define FWALCR1        0x0B4
 
 #define TSU_ADRH0       0x0100
 #define TSU_ADRL0       0x0104
 #define TSU_ADRL31      0x01FC
 
-/* Register's bits */
+#endif /* CONFIG_CPU_SUBTYPE_SH7763 */
+
+/*
+ * Register's bits
+ */
+#ifdef CONFIG_CPU_SUBTYPE_SH7763
+/* EDSR */
+enum EDSR_BIT {
+        EDSR_ENT = 0x01, EDSR_ENR = 0x02,
+};
+#define EDSR_ENALL (EDSR_ENT|EDSR_ENR)
+
+/* GECMR */
+enum GECMR_BIT {
+        GECMR_10 = 0x0, GECMR_100 = 0x04, GECMR_1000 = 0x01,
+};
+#endif
 
 /* EDMR */
 enum DMAC_M_BIT {
-        EDMR_DL1 = 0x20, EDMR_DL0 = 0x10, EDMR_SRST = 0x01,
+        EDMR_DL1 = 0x20, EDMR_DL0 = 0x10,
+#ifdef CONFIG_CPU_SUBTYPE_SH7763
+        EDMR_SRST       = 0x03,
+        EMDR_DESC_R     = 0x30, /* Descriptor reserve size */
+        EDMR_EL         = 0x40, /* Litte endian */
+#else /* CONFIG_CPU_SUBTYPE_SH7763 */
+        EDMR_SRST = 0x01,
+#endif
 };
 
 /* EDTRR */
 enum DMAC_T_BIT {
+#ifdef CONFIG_CPU_SUBTYPE_SH7763
+        EDTRR_TRNS = 0x03,
+#else
         EDTRR_TRNS = 0x01,
+#endif
 };
 
 /* EDRRR*/
@@ -173,21 +304,47 @@ enum PHY_STATUS_BIT { PHY_ST_LINK = 0x01, };
 
 /* EESR */
 enum EESR_BIT {
-        EESR_TWB = 0x40000000, EESR_TABT = 0x04000000,
+#ifndef CONFIG_CPU_SUBTYPE_SH7763
+        EESR_TWB  = 0x40000000,
+#else
+        EESR_TWB  = 0xC0000000,
+        EESR_TC1  = 0x20000000,
+        EESR_TUC  = 0x10000000,
+        EESR_ROC  = 0x80000000,
+#endif
+        EESR_TABT = 0x04000000,
         EESR_RABT = 0x02000000, EESR_RFRMER = 0x01000000,
-        EESR_ADE = 0x00800000, EESR_ECI = 0x00400000,
-        EESR_FTC = 0x00200000, EESR_TDE = 0x00100000,
-        EESR_TFE = 0x00080000, EESR_FRC = 0x00040000,
-        EESR_RDE = 0x00020000, EESR_RFE = 0x00010000,
-        EESR_TINT4 = 0x00000800, EESR_TINT3 = 0x00000400,
-        EESR_TINT2 = 0x00000200, EESR_TINT1 = 0x00000100,
-        EESR_RINT8 = 0x00000080, EESR_RINT5 = 0x00000010,
-        EESR_RINT4 = 0x00000008, EESR_RINT3 = 0x00000004,
-        EESR_RINT2 = 0x00000002, EESR_RINT1 = 0x00000001,
-};
-
-#define EESR_ERR_CHECK  (EESR_TWB | EESR_TABT | EESR_RABT | EESR_RDE \
+#ifndef CONFIG_CPU_SUBTYPE_SH7763
+        EESR_ADE  = 0x00800000,
+#endif
+        EESR_ECI  = 0x00400000,
+        EESR_FTC  = 0x00200000, EESR_TDE  = 0x00100000,
+        EESR_TFE  = 0x00080000, EESR_FRC  = 0x00040000,
+        EESR_RDE  = 0x00020000, EESR_RFE  = 0x00010000,
+#ifndef CONFIG_CPU_SUBTYPE_SH7763
+        EESR_CND  = 0x00000800,
+#endif
+        EESR_DLC  = 0x00000400,
+        EESR_CD   = 0x00000200, EESR_RTO  = 0x00000100,
+        EESR_RMAF = 0x00000080, EESR_CEEF = 0x00000040,
+        EESR_CELF = 0x00000020, EESR_RRF  = 0x00000010,
+        EESR_RTLF = 0x00000008, EESR_RTSF = 0x00000004,
+        EESR_PRE  = 0x00000002, EESR_CERF = 0x00000001,
+};
+
+
+#ifdef CONFIG_CPU_SUBTYPE_SH7763
+# define TX_CHECK (EESR_TC1 | EESR_FTC)
+# define EESR_ERR_CHECK (EESR_TWB | EESR_TABT | EESR_RABT | EESR_RDE \
+                | EESR_RFRMER | EESR_TFE | EESR_TDE | EESR_ECI)
+# define TX_ERROR_CEHCK (EESR_TWB | EESR_TABT | EESR_TDE | EESR_TFE)
+
+#else
+# define TX_CHECK (EESR_FTC | EESR_CND | EESR_DLC | EESR_CD | EESR_RTO)
+# define EESR_ERR_CHECK (EESR_TWB | EESR_TABT | EESR_RABT | EESR_RDE \
                 | EESR_RFRMER | EESR_ADE | EESR_TFE | EESR_TDE | EESR_ECI)
+# define TX_ERROR_CEHCK (EESR_TWB | EESR_TABT | EESR_ADE | EESR_TDE | EESR_TFE)
+#endif
 
 /* EESIPR */
 enum DMAC_IM_BIT {
@@ -207,8 +364,8 @@ enum DMAC_IM_BIT {
 
 /* Receive descriptor bit */
 enum RD_STS_BIT {
-        RD_RACT = 0x80000000, RC_RDEL = 0x40000000,
-        RC_RFP1 = 0x20000000, RC_RFP0 = 0x10000000,
+        RD_RACT = 0x80000000, RD_RDEL = 0x40000000,
+        RD_RFP1 = 0x20000000, RD_RFP0 = 0x10000000,
         RD_RFE = 0x08000000, RD_RFS10 = 0x00000200,
         RD_RFS9 = 0x00000100, RD_RFS8 = 0x00000080,
         RD_RFS7 = 0x00000040, RD_RFS6 = 0x00000020,
@@ -216,9 +373,9 @@ enum RD_STS_BIT {
         RD_RFS3 = 0x00000004, RD_RFS2 = 0x00000002,
         RD_RFS1 = 0x00000001,
 };
-#define RDF1ST  RC_RFP1
-#define RDFEND  RC_RFP0
-#define RD_RFP  (RC_RFP1|RC_RFP0)
+#define RDF1ST  RD_RFP1
+#define RDFEND  RD_RFP0
+#define RD_RFP  (RD_RFP1|RD_RFP0)
 
 /* FCFTR */
 enum FCFTR_BIT {
@@ -231,7 +388,8 @@ enum FCFTR_BIT {
 
 /* Transfer descriptor bit */
 enum TD_STS_BIT {
-        TD_TACT = 0x80000000, TD_TDLE = 0x40000000, TD_TFP1 = 0x20000000,
+        TD_TACT = 0x80000000,
+        TD_TDLE = 0x40000000, TD_TFP1 = 0x20000000,
         TD_TFP0 = 0x10000000,
 };
 #define TDF1ST  TD_TFP1
@@ -242,6 +400,10 @@ enum TD_STS_BIT {
 enum RECV_RST_BIT { RMCR_RST = 0x01, };
 /* ECMR */
 enum FELIC_MODE_BIT {
+#ifdef CONFIG_CPU_SUBTYPE_SH7763
+        ECMR_TRCCM = 0x04000000, ECMR_RCSC = 0x00800000,
+        ECMR_DPAD = 0x00200000, ECMR_RZPF = 0x00100000,
+#endif
         ECMR_ZPF = 0x00080000, ECMR_PFR = 0x00040000, ECMR_RXF = 0x00020000,
         ECMR_TXF = 0x00010000, ECMR_MCT = 0x00002000, ECMR_PRCEF = 0x00001000,
         ECMR_PMDE = 0x00000200, ECMR_RE = 0x00000040, ECMR_TE = 0x00000020,
@@ -249,18 +411,45 @@ enum FELIC_MODE_BIT {
         ECMR_PRM = 0x00000001,
 };
 
+#ifdef CONFIG_CPU_SUBTYPE_SH7763
+#define ECMR_CHG_DM     (ECMR_TRCCM | ECMR_RZPF | ECMR_ZPF |\
+                        ECMR_PFR | ECMR_RXF | ECMR_TXF | ECMR_MCT)
+#else
+#define ECMR_CHG_DM     (ECMR_ZPF | ECMR_PFR ECMR_RXF | ECMR_TXF | ECMR_MCT)
+#endif
+
 /* ECSR */
 enum ECSR_STATUS_BIT {
-        ECSR_BRCRX = 0x20, ECSR_PSRTO = 0x10, ECSR_LCHNG = 0x04,
+#ifndef CONFIG_CPU_SUBTYPE_SH7763
+        ECSR_BRCRX = 0x20, ECSR_PSRTO = 0x10,
+#endif
+        ECSR_LCHNG = 0x04,
         ECSR_MPD = 0x02, ECSR_ICD = 0x01,
 };
 
+#ifdef CONFIG_CPU_SUBTYPE_SH7763
+# define ECSR_INIT (ECSR_ICD | ECSIPR_MPDIP)
+#else
+# define ECSR_INIT (ECSR_BRCRX | ECSR_PSRTO | \
+                        ECSR_LCHNG | ECSR_ICD | ECSIPR_MPDIP)
+#endif
+
 /* ECSIPR */
 enum ECSIPR_STATUS_MASK_BIT {
-        ECSIPR_BRCRXIP = 0x20, ECSIPR_PSRTOIP = 0x10, ECSIPR_LCHNGIP = 0x04,
+#ifndef CONFIG_CPU_SUBTYPE_SH7763
+        ECSIPR_BRCRXIP = 0x20, ECSIPR_PSRTOIP = 0x10,
+#endif
+        ECSIPR_LCHNGIP = 0x04,
         ECSIPR_MPDIP = 0x02, ECSIPR_ICDIP = 0x01,
 };
 
+#ifdef CONFIG_CPU_SUBTYPE_SH7763
+# define ECSIPR_INIT (ECSIPR_LCHNGIP | ECSIPR_ICDIP | ECSIPR_MPDIP)
+#else
+# define ECSIPR_INIT (ECSIPR_BRCRXIP | ECSIPR_PSRTOIP | ECSIPR_LCHNGIP | \
+                                ECSIPR_ICDIP | ECSIPR_MPDIP)
+#endif
+
 /* APR */
 enum APR_BIT {
         APR_AP = 0x00000001,
@@ -285,6 +474,15 @@ enum RPADIR_BIT {
         RPADIR_PADR = 0x0003f,
 };
 
+#if defined(CONFIG_CPU_SUBTYPE_SH7763)
+# define RPADIR_INIT (0x00)
+#else
+# define RPADIR_INIT (RPADIR_PADS1)
+#endif
+
+/* RFLR */
+#define RFLR_VALUE 0x1000
+
 /* FDR */
 enum FIFO_SIZE_BIT {
         FIFO_SIZE_T = 0x00000700, FIFO_SIZE_R = 0x00000007,
@@ -316,7 +514,7 @@ enum PHY_ANA_BIT {
         PHY_A_NP = 0x8000, PHY_A_ACK = 0x4000, PHY_A_RF = 0x2000,
         PHY_A_FCS = 0x0400, PHY_A_T4 = 0x0200, PHY_A_FDX = 0x0100,
         PHY_A_HDX = 0x0080, PHY_A_10FDX = 0x0040, PHY_A_10HDX = 0x0020,
-        PHY_A_SEL = 0x001f,
+        PHY_A_SEL = 0x001e,
 };
 /* PHY_ANL */
 enum PHY_ANL_BIT {
@@ -449,6 +647,10 @@ struct sh_eth_private {
         struct net_device_stats tsu_stats;      /* TSU forward status */
 };
 
+#ifdef CONFIG_CPU_SUBTYPE_SH7763
+/* SH7763 has endian control register */
+#define swaps(x, y)
+#else
 static void swaps(char *src, int len)
 {
 #ifdef __LITTLE_ENDIAN__
@@ -460,5 +662,5 @@ static void swaps(char *src, int len)
                 *p = swab32(*p);
 #endif
 }
-
+#endif /* CONFIG_CPU_SUBTYPE_SH7763 */
 #endif
diff --git a/drivers/net/skfp/smt.c b/drivers/net/skfp/smt.c
index ffbfb1b79f97..805383b33d3c 100644
--- a/drivers/net/skfp/smt.c
+++ b/drivers/net/skfp/smt.c
@@ -19,6 +19,7 @@
 #include "h/smc.h"
 #include "h/smt_p.h"
 #include <linux/bitrev.h>
+#include <linux/kernel.h>
 
 #define KERNEL
 #include "h/smtstate.h"
@@ -1730,20 +1731,18 @@ void fddi_send_antc(struct s_smc *smc, struct fddi_addr *dest)
 #endif
 
 #ifdef  DEBUG
-#define hextoasc(x)     "0123456789abcdef"[x]
-
 char *addr_to_string(struct fddi_addr *addr)
 {
         int     i ;
         static char     string[6*3] = "****" ;
 
         for (i = 0 ; i < 6 ; i++) {
-                string[i*3] = hextoasc((addr->a[i]>>4)&0xf) ;
-                string[i*3+1] = hextoasc((addr->a[i])&0xf) ;
-                string[i*3+2] = ':' ;
+                string[i * 3] = hex_asc_hi(addr->a[i]);
+                string[i * 3 + 1] = hex_asc_lo(addr->a[i]);
+                string[i * 3 + 2] = ':';
         }
-        string[5*3+2] = 0 ;
-        return(string) ;
+        string[5 * 3 + 2] = 0;
+        return(string);
 }
 #endif
 
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 633c128a6228..26aa37aa531f 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -1982,8 +1982,6 @@ static void tg3_power_down_phy(struct tg3 *tp)
 static int tg3_set_power_state(struct tg3 *tp, pci_power_t state)
 {
         u32 misc_host_ctrl;
-        u16 power_control, power_caps;
-        int pm = tp->pm_cap;
 
         /* Make sure register accesses (indirect or otherwise)
          * will function correctly.
@@ -1992,18 +1990,10 @@ static int tg3_set_power_state(struct tg3 *tp, pci_power_t state)
                                TG3PCI_MISC_HOST_CTRL,
                                tp->misc_host_ctrl);
 
-        pci_read_config_word(tp->pdev,
-                             pm + PCI_PM_CTRL,
-                             &power_control);
-        power_control |= PCI_PM_CTRL_PME_STATUS;
-        power_control &= ~(PCI_PM_CTRL_STATE_MASK);
         switch (state) {
         case PCI_D0:
-                power_control |= 0;
-                pci_write_config_word(tp->pdev,
-                                      pm + PCI_PM_CTRL,
-                                      power_control);
-                udelay(100);    /* Delay after power state change */
+                pci_enable_wake(tp->pdev, state, false);
+                pci_set_power_state(tp->pdev, PCI_D0);
 
                 /* Switch out of Vaux if it is a NIC */
                 if (tp->tg3_flags2 & TG3_FLG2_IS_NIC)
@@ -2012,26 +2002,15 @@ static int tg3_set_power_state(struct tg3 *tp, pci_power_t state)
                 return 0;
 
         case PCI_D1:
-                power_control |= 1;
-                break;
-
         case PCI_D2:
-                power_control |= 2;
-                break;
-
         case PCI_D3hot:
-                power_control |= 3;
                 break;
 
         default:
-                printk(KERN_WARNING PFX "%s: Invalid power state (%d) "
-                       "requested.\n",
-                       tp->dev->name, state);
+                printk(KERN_ERR PFX "%s: Invalid power state (D%d) requested\n",
+                        tp->dev->name, state);
                 return -EINVAL;
         }
-
-        power_control |= PCI_PM_CTRL_PME_ENABLE;
-
         misc_host_ctrl = tr32(TG3PCI_MISC_HOST_CTRL);
         tw32(TG3PCI_MISC_HOST_CTRL,
              misc_host_ctrl | MISC_HOST_CTRL_MASK_PCI_INT);
@@ -2109,8 +2088,6 @@ static int tg3_set_power_state(struct tg3 *tp, pci_power_t state)
                                                      WOL_DRV_WOL |
                                                      WOL_SET_MAGIC_PKT);
 
-        pci_read_config_word(tp->pdev, pm + PCI_PM_PMC, &power_caps);
-
         if (tp->tg3_flags & TG3_FLAG_WOL_ENABLE) {
                 u32 mac_mode;
 
@@ -2143,8 +2120,8 @@ static int tg3_set_power_state(struct tg3 *tp, pci_power_t state)
                 if (!(tp->tg3_flags2 & TG3_FLG2_5750_PLUS))
                         tw32(MAC_LED_CTRL, tp->led_ctrl);
 
-                if (((power_caps & PCI_PM_CAP_PME_D3cold) &&
-                     (tp->tg3_flags & TG3_FLAG_WOL_ENABLE)))
+                if (pci_pme_capable(tp->pdev, state) &&
+                     (tp->tg3_flags & TG3_FLAG_WOL_ENABLE))
                         mac_mode |= MAC_MODE_MAGIC_PKT_ENABLE;
 
                 tw32_f(MAC_MODE, mac_mode);
@@ -2236,9 +2213,11 @@ static int tg3_set_power_state(struct tg3 *tp, pci_power_t state)
 
         tg3_write_sig_post_reset(tp, RESET_KIND_SHUTDOWN);
 
+        if (tp->tg3_flags & TG3_FLAG_WOL_ENABLE)
+                pci_enable_wake(tp->pdev, state, true);
+
         /* Finally, set the new power state. */
-        pci_write_config_word(tp->pdev, pm + PCI_PM_CTRL, power_control);
-        udelay(100);    /* Delay after power state change */
+        pci_set_power_state(tp->pdev, state);
 
         return 0;
 }
@@ -9065,7 +9044,8 @@ static void tg3_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
 {
         struct tg3 *tp = netdev_priv(dev);
 
-        if (tp->tg3_flags & TG3_FLAG_WOL_CAP)
+        if ((tp->tg3_flags & TG3_FLAG_WOL_CAP) &&
+            device_can_wakeup(&tp->pdev->dev))
                 wol->supported = WAKE_MAGIC;
         else
                 wol->supported = 0;
@@ -9078,18 +9058,22 @@ static void tg3_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
 static int tg3_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
 {
         struct tg3 *tp = netdev_priv(dev);
+        struct device *dp = &tp->pdev->dev;
 
         if (wol->wolopts & ~WAKE_MAGIC)
                 return -EINVAL;
         if ((wol->wolopts & WAKE_MAGIC) &&
-            !(tp->tg3_flags & TG3_FLAG_WOL_CAP))
+            !((tp->tg3_flags & TG3_FLAG_WOL_CAP) && device_can_wakeup(dp)))
                 return -EINVAL;
 
         spin_lock_bh(&tp->lock);
-        if (wol->wolopts & WAKE_MAGIC)
+        if (wol->wolopts & WAKE_MAGIC) {
                 tp->tg3_flags |= TG3_FLAG_WOL_ENABLE;
-        else
+                device_set_wakeup_enable(dp, true);
+        } else {
                 tp->tg3_flags &= ~TG3_FLAG_WOL_ENABLE;
+                device_set_wakeup_enable(dp, false);
+        }
         spin_unlock_bh(&tp->lock);
 
         return 0;
@@ -11296,7 +11280,8 @@ static void __devinit tg3_get_eeprom_hw_cfg(struct tg3 *tp)
                 if (val & VCPU_CFGSHDW_ASPM_DBNC)
                         tp->tg3_flags |= TG3_FLAG_ASPM_WORKAROUND;
                 if ((val & VCPU_CFGSHDW_WOL_ENABLE) &&
-                    (val & VCPU_CFGSHDW_WOL_MAGPKT))
+                    (val & VCPU_CFGSHDW_WOL_MAGPKT) &&
+                    device_may_wakeup(&tp->pdev->dev))
                         tp->tg3_flags |= TG3_FLAG_WOL_ENABLE;
                 return;
         }
@@ -11426,8 +11411,9 @@ static void __devinit tg3_get_eeprom_hw_cfg(struct tg3 *tp)
                     !(nic_cfg & NIC_SRAM_DATA_CFG_FIBER_WOL))
                         tp->tg3_flags &= ~TG3_FLAG_WOL_CAP;
 
-                if (tp->tg3_flags & TG3_FLAG_WOL_CAP &&
-                    nic_cfg & NIC_SRAM_DATA_CFG_WOL_ENABLE)
+                if ((tp->tg3_flags & TG3_FLAG_WOL_CAP) &&
+                    (nic_cfg & NIC_SRAM_DATA_CFG_WOL_ENABLE) &&
+                    device_may_wakeup(&tp->pdev->dev))
                         tp->tg3_flags |= TG3_FLAG_WOL_ENABLE;
 
                 if (cfg2 & (1 << 17))
@@ -13613,6 +13599,7 @@ static int tg3_suspend(struct pci_dev *pdev, pm_message_t state)
 {
         struct net_device *dev = pci_get_drvdata(pdev);
         struct tg3 *tp = netdev_priv(dev);
+        pci_power_t target_state;
         int err;
 
         /* PCI register 4 needs to be saved whether netif_running() or not.
@@ -13641,7 +13628,9 @@ static int tg3_suspend(struct pci_dev *pdev, pm_message_t state)
         tp->tg3_flags &= ~TG3_FLAG_INIT_COMPLETE;
         tg3_full_unlock(tp);
 
-        err = tg3_set_power_state(tp, pci_choose_state(pdev, state));
+        target_state = pdev->pm_cap ? pci_target_state(pdev) : PCI_D3hot;
+
+        err = tg3_set_power_state(tp, target_state);
         if (err) {
                 int err2;
 
diff --git a/drivers/net/usb/dm9601.c b/drivers/net/usb/dm9601.c
index f7319d326912..78df2be8a728 100644
--- a/drivers/net/usb/dm9601.c
+++ b/drivers/net/usb/dm9601.c
@@ -55,12 +55,28 @@
 
 static int dm_read(struct usbnet *dev, u8 reg, u16 length, void *data)
 {
+        void *buf;
+        int err = -ENOMEM;
+
         devdbg(dev, "dm_read() reg=0x%02x length=%d", reg, length);
-        return usb_control_msg(dev->udev,
-                               usb_rcvctrlpipe(dev->udev, 0),
-                               DM_READ_REGS,
-                               USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-                               0, reg, data, length, USB_CTRL_SET_TIMEOUT);
+
+        buf = kmalloc(length, GFP_KERNEL);
+        if (!buf)
+                goto out;
+
+        err = usb_control_msg(dev->udev,
+                              usb_rcvctrlpipe(dev->udev, 0),
+                              DM_READ_REGS,
+                              USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+                              0, reg, buf, length, USB_CTRL_SET_TIMEOUT);
+        if (err == length)
+                memcpy(data, buf, length);
+        else if (err >= 0)
+                err = -EINVAL;
+        kfree(buf);
+
+ out:
+        return err;
 }
 
 static int dm_read_reg(struct usbnet *dev, u8 reg, u8 *value)
@@ -70,12 +86,28 @@ static int dm_read_reg(struct usbnet *dev, u8 reg, u8 *value)
 
 static int dm_write(struct usbnet *dev, u8 reg, u16 length, void *data)
 {
+        void *buf = NULL;
+        int err = -ENOMEM;
+
         devdbg(dev, "dm_write() reg=0x%02x, length=%d", reg, length);
-        return usb_control_msg(dev->udev,
-                               usb_sndctrlpipe(dev->udev, 0),
-                               DM_WRITE_REGS,
-                               USB_DIR_OUT | USB_TYPE_VENDOR |USB_RECIP_DEVICE,
-                               0, reg, data, length, USB_CTRL_SET_TIMEOUT);
+
+        if (data) {
+                buf = kmalloc(length, GFP_KERNEL);
+                if (!buf)
+                        goto out;
+                memcpy(buf, data, length);
+        }
+
+        err = usb_control_msg(dev->udev,
+                              usb_sndctrlpipe(dev->udev, 0),
+                              DM_WRITE_REGS,
+                              USB_DIR_OUT | USB_TYPE_VENDOR |USB_RECIP_DEVICE,
+                              0, reg, buf, length, USB_CTRL_SET_TIMEOUT);
+        kfree(buf);
+        if (err >= 0 && err < length)
+                err = -EINVAL;
+ out:
+        return err;
 }
 
 static int dm_write_reg(struct usbnet *dev, u8 reg, u8 value)
diff --git a/drivers/net/wd.c b/drivers/net/wd.c
index fa14255282af..6f9aa1643743 100644
--- a/drivers/net/wd.c
+++ b/drivers/net/wd.c
@@ -337,7 +337,7 @@ static int __init wd_probe1(struct net_device *dev, int ioaddr)
 #ifdef CONFIG_NET_POLL_CONTROLLER
         dev->poll_controller = ei_poll;
 #endif
-        NS8390_init(dev, 0);
+        NS8390p_init(dev, 0);
 
 #if 1
         /* Enable interrupt generation on softconfig cards -- M.U */
diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c
index d9769c527346..ff3fad794b61 100644
--- a/drivers/net/wireless/ath5k/base.c
+++ b/drivers/net/wireless/ath5k/base.c
@@ -43,7 +43,9 @@
 #include <linux/version.h>
 #include <linux/module.h>
 #include <linux/delay.h>
+#include <linux/hardirq.h>
 #include <linux/if.h>
+#include <linux/io.h>
 #include <linux/netdevice.h>
 #include <linux/cache.h>
 #include <linux/pci.h>
@@ -471,9 +473,6 @@ ath5k_pci_probe(struct pci_dev *pdev,
         /* Set private data */
         pci_set_drvdata(pdev, hw);
 
-        /* Enable msi for devices that support it */
-        pci_enable_msi(pdev);
-
         /* Setup interrupt handler */
         ret = request_irq(pdev->irq, ath5k_intr, IRQF_SHARED, "ath", sc);
         if (ret) {
@@ -551,7 +550,6 @@ err_ah:
 err_irq:
         free_irq(pdev->irq, sc);
 err_free:
-        pci_disable_msi(pdev);
         ieee80211_free_hw(hw);
 err_map:
         pci_iounmap(pdev, mem);
@@ -573,7 +571,6 @@ ath5k_pci_remove(struct pci_dev *pdev)
         ath5k_detach(pdev, hw);
         ath5k_hw_detach(sc->ah);
         free_irq(pdev->irq, sc);
-        pci_disable_msi(pdev);
         pci_iounmap(pdev, sc->iobase);
         pci_release_region(pdev, 0);
         pci_disable_device(pdev);
@@ -590,6 +587,9 @@ ath5k_pci_suspend(struct pci_dev *pdev, pm_message_t state)
         ath5k_led_off(sc);
 
         ath5k_stop_hw(sc);
+
+        free_irq(pdev->irq, sc);
+        pci_disable_msi(pdev);
         pci_save_state(pdev);
         pci_disable_device(pdev);
         pci_set_power_state(pdev, PCI_D3hot);
@@ -605,15 +605,12 @@ ath5k_pci_resume(struct pci_dev *pdev)
         struct ath5k_hw *ah = sc->ah;
         int i, err;
 
-        err = pci_set_power_state(pdev, PCI_D0);
-        if (err)
-                return err;
+        pci_restore_state(pdev);
 
         err = pci_enable_device(pdev);
         if (err)
                 return err;
 
-        pci_restore_state(pdev);
         /*
          * Suspend/Resume resets the PCI configuration space, so we have to
          * re-disable the RETRY_TIMEOUT register (0x41) to keep
@@ -621,7 +618,17 @@ ath5k_pci_resume(struct pci_dev *pdev)
          */
         pci_write_config_byte(pdev, 0x41, 0);
 
-        ath5k_init(sc);
+        pci_enable_msi(pdev);
+
+        err = request_irq(pdev->irq, ath5k_intr, IRQF_SHARED, "ath", sc);
+        if (err) {
+                ATH5K_ERR(sc, "request_irq failed\n");
+                goto err_msi;
+        }
+
+        err = ath5k_init(sc);
+        if (err)
+                goto err_irq;
         ath5k_led_enable(sc);
 
         /*
@@ -635,6 +642,12 @@ ath5k_pci_resume(struct pci_dev *pdev)
                 ath5k_hw_reset_key(ah, i);
 
         return 0;
+err_irq:
+        free_irq(pdev->irq, sc);
+err_msi:
+        pci_disable_msi(pdev);
+        pci_disable_device(pdev);
+        return err;
 }
 #endif /* CONFIG_PM */
 
@@ -1224,7 +1237,7 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
 
         pktlen = skb->len;
 
-        if (!(info->flags & IEEE80211_TX_CTL_DO_NOT_ENCRYPT)) {
+        if (info->control.hw_key) {
                 keyidx = info->control.hw_key->hw_key_idx;
                 pktlen += info->control.icv_len;
         }
@@ -1249,6 +1262,7 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
 
         txq->link = &ds->ds_link;
         ath5k_hw_tx_start(ah, txq->qnum);
+        mmiowb();
         spin_unlock_bh(&txq->lock);
 
         return 0;
@@ -1583,7 +1597,6 @@ ath5k_rx_stop(struct ath5k_softc *sc)
         ath5k_hw_stop_pcu_recv(ah);     /* disable PCU */
         ath5k_hw_set_rx_filter(ah, 0);  /* clear recv filter */
         ath5k_hw_stop_rx_dma(ah);       /* disable DMA engine */
-        mdelay(3);                      /* 3ms is long enough for 1 frame */
 
         ath5k_debug_printrxbuffs(sc, ah);
 
@@ -1682,31 +1695,44 @@ ath5k_tasklet_rx(unsigned long data)
         struct ath5k_rx_status rs = {};
         struct sk_buff *skb;
         struct ath5k_softc *sc = (void *)data;
-        struct ath5k_buf *bf;
+        struct ath5k_buf *bf, *bf_last;
         struct ath5k_desc *ds;
         int ret;
         int hdrlen;
         int pad;
 
         spin_lock(&sc->rxbuflock);
+        if (list_empty(&sc->rxbuf)) {
+                ATH5K_WARN(sc, "empty rx buf pool\n");
+                goto unlock;
+        }
+        bf_last = list_entry(sc->rxbuf.prev, struct ath5k_buf, list);
         do {
                 rxs.flag = 0;
 
-                if (unlikely(list_empty(&sc->rxbuf))) {
-                        ATH5K_WARN(sc, "empty rx buf pool\n");
-                        break;
-                }
                 bf = list_first_entry(&sc->rxbuf, struct ath5k_buf, list);
                 BUG_ON(bf->skb == NULL);
                 skb = bf->skb;
                 ds = bf->desc;
 
-                /* TODO only one segment */
-                pci_dma_sync_single_for_cpu(sc->pdev, sc->desc_daddr,
-                                sc->desc_len, PCI_DMA_FROMDEVICE);
-
-                if (unlikely(ds->ds_link == bf->daddr)) /* this is the end */
-                        break;
+                /*
+                 * last buffer must not be freed to ensure proper hardware
+                 * function. When the hardware finishes also a packet next to
+                 * it, we are sure, it doesn't use it anymore and we can go on.
+                 */
+                if (bf_last == bf)
+                        bf->flags |= 1;
+                if (bf->flags) {
+                        struct ath5k_buf *bf_next = list_entry(bf->list.next,
+                                        struct ath5k_buf, list);
+                        ret = sc->ah->ah_proc_rx_desc(sc->ah, bf_next->desc,
+                                        &rs);
+                        if (ret)
+                                break;
+                        bf->flags &= ~1;
+                        /* skip the overwritten one (even status is martian) */
+                        goto next;
+                }
 
                 ret = sc->ah->ah_proc_rx_desc(sc->ah, ds, &rs);
                 if (unlikely(ret == -EINPROGRESS))
@@ -1752,8 +1778,6 @@ ath5k_tasklet_rx(unsigned long data)
                                 goto next;
                 }
 accept:
-                pci_dma_sync_single_for_cpu(sc->pdev, bf->skbaddr,
-                                rs.rs_datalen, PCI_DMA_FROMDEVICE);
                 pci_unmap_single(sc->pdev, bf->skbaddr, sc->rxbufsize,
                                 PCI_DMA_FROMDEVICE);
                 bf->skb = NULL;
@@ -1816,6 +1840,7 @@ accept:
 next:
                 list_move_tail(&bf->list, &sc->rxbuf);
         } while (ath5k_rxbuf_setup(sc, bf) == 0);
+unlock:
         spin_unlock(&sc->rxbuflock);
 }
 
@@ -1840,9 +1865,6 @@ ath5k_tx_processq(struct ath5k_softc *sc, struct ath5k_txq *txq)
         list_for_each_entry_safe(bf, bf0, &txq->q, list) {
                 ds = bf->desc;
 
-                /* TODO only one segment */
-                pci_dma_sync_single_for_cpu(sc->pdev, sc->desc_daddr,
-                                sc->desc_len, PCI_DMA_FROMDEVICE);
                 ret = sc->ah->ah_proc_tx_desc(sc->ah, ds, &ts);
                 if (unlikely(ret == -EINPROGRESS))
                         break;
@@ -2015,8 +2037,6 @@ ath5k_beacon_send(struct ath5k_softc *sc)
                 ATH5K_WARN(sc, "beacon queue %u didn't stop?\n", sc->bhalq);
                 /* NB: hw still stops DMA, so proceed */
         }
-        pci_dma_sync_single_for_cpu(sc->pdev, bf->skbaddr, bf->skb->len,
-                        PCI_DMA_TODEVICE);
 
         ath5k_hw_put_tx_buf(ah, sc->bhalq, bf->daddr);
         ath5k_hw_tx_start(ah, sc->bhalq);
@@ -2240,6 +2260,7 @@ ath5k_init(struct ath5k_softc *sc)
 
         ret = 0;
 done:
+        mmiowb();
         mutex_unlock(&sc->lock);
         return ret;
 }
@@ -2272,6 +2293,7 @@ ath5k_stop_locked(struct ath5k_softc *sc)
         if (!test_bit(ATH_STAT_INVALID, sc->status)) {
                 ath5k_led_off(sc);
                 ath5k_hw_set_intr(ah, 0);
+                synchronize_irq(sc->pdev->irq);
         }
         ath5k_txq_cleanup(sc);
         if (!test_bit(ATH_STAT_INVALID, sc->status)) {
@@ -2321,9 +2343,13 @@ ath5k_stop_hw(struct ath5k_softc *sc)
                 }
         }
         ath5k_txbuf_free(sc, sc->bbuf);
+        mmiowb();
         mutex_unlock(&sc->lock);
 
         del_timer_sync(&sc->calib_tim);
+        tasklet_kill(&sc->rxtq);
+        tasklet_kill(&sc->txtq);
+        tasklet_kill(&sc->restq);
 
         return ret;
 }
@@ -2550,8 +2576,6 @@ ath5k_init_leds(struct ath5k_softc *sc)
         struct pci_dev *pdev = sc->pdev;
         char name[ATH5K_LED_MAX_NAME_LEN + 1];
 
-        sc->led_on = 0;  /* active low */
-
         /*
          * Auto-enable soft led processing for IBM cards and for
          * 5211 minipci cards.
@@ -2560,11 +2584,13 @@ ath5k_init_leds(struct ath5k_softc *sc)
             pdev->device == PCI_DEVICE_ID_ATHEROS_AR5211) {
                 __set_bit(ATH_STAT_LEDSOFT, sc->status);
                 sc->led_pin = 0;
+                sc->led_on = 0;  /* active low */
         }
         /* Enable softled on PIN1 on HP Compaq nc6xx, nc4000 & nx5000 laptops */
         if (pdev->subsystem_vendor == PCI_VENDOR_ID_COMPAQ) {
                 __set_bit(ATH_STAT_LEDSOFT, sc->status);
                 sc->led_pin = 1;
+                sc->led_on = 1;  /* active high */
         }
         if (!test_bit(ATH_STAT_LEDSOFT, sc->status))
                 goto out;
@@ -2783,6 +2809,7 @@ ath5k_config_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
                 /* XXX: assoc id is set to 0 for now, mac80211 doesn't have
                  * a clean way of letting us retrieve this yet. */
                 ath5k_hw_set_associd(ah, ah->ah_bssid, 0);
+                mmiowb();
         }
 
         if (conf->changed & IEEE80211_IFCC_BEACON &&
@@ -2971,6 +2998,7 @@ ath5k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
         }
 
 unlock:
+        mmiowb();
         mutex_unlock(&sc->lock);
         return ret;
 }
@@ -3032,8 +3060,6 @@ ath5k_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb)
 
         ath5k_debug_dump_skb(sc, skb, "BC  ", 1);
 
-        mutex_lock(&sc->lock);
-
         if (sc->opmode != IEEE80211_IF_TYPE_IBSS) {
                 ret = -EIO;
                 goto end;
@@ -3044,11 +3070,12 @@ ath5k_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb)
         ret = ath5k_beacon_setup(sc, sc->bbuf);
         if (ret)
                 sc->bbuf->skb = NULL;
-        else
+        else {
                 ath5k_beacon_config(sc);
+                mmiowb();
+        }
 
 end:
-        mutex_unlock(&sc->lock);
         return ret;
 }
 
diff --git a/drivers/net/wireless/ath5k/base.h b/drivers/net/wireless/ath5k/base.h
index 47f414b09e67..d7e03e6b8271 100644
--- a/drivers/net/wireless/ath5k/base.h
+++ b/drivers/net/wireless/ath5k/base.h
@@ -56,7 +56,7 @@
 
 struct ath5k_buf {
         struct list_head        list;
-        unsigned int            flags;  /* tx descriptor flags */
+        unsigned int            flags;  /* rx descriptor flags */
         struct ath5k_desc       *desc;  /* virtual addr of desc */
         dma_addr_t              daddr;  /* physical addr of desc */
         struct sk_buff          *skb;   /* skbuff for buf */
diff --git a/drivers/net/wireless/ath5k/hw.c b/drivers/net/wireless/ath5k/hw.c
index c6d12c53bda4..7ca87a557312 100644
--- a/drivers/net/wireless/ath5k/hw.c
+++ b/drivers/net/wireless/ath5k/hw.c
@@ -1440,6 +1440,7 @@ int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue)
 
                 /* Stop queue */
                 ath5k_hw_reg_write(ah, tx_queue, AR5K_CR);
+                ath5k_hw_reg_read(ah, AR5K_CR);
         } else {
                 /*
                  * Schedule TX disable and wait until queue is empty
@@ -1456,6 +1457,8 @@ int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue)
 
                 /* Clear register */
                 ath5k_hw_reg_write(ah, 0, AR5K_QCU_TXD);
+                if (pending)
+                        return -EBUSY;
         }
 
         /* TODO: Check for success else return error */
@@ -1716,6 +1719,7 @@ enum ath5k_int ath5k_hw_set_intr(struct ath5k_hw *ah, enum ath5k_int new_mask)
 
         /* ..re-enable interrupts */
         ath5k_hw_reg_write(ah, AR5K_IER_ENABLE, AR5K_IER);
+        ath5k_hw_reg_read(ah, AR5K_IER);
 
         return old_mask;
 }
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index e78319aa47c1..3bf3a869361f 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -4645,8 +4645,7 @@ static int b43_wireless_init(struct ssb_device *dev)
         }
 
         /* fill hw info */
-        hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
-                    IEEE80211_HW_RX_INCLUDES_FCS |
+        hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
                     IEEE80211_HW_SIGNAL_DBM |
                     IEEE80211_HW_NOISE_DBM;
 
diff --git a/drivers/net/wireless/b43/xmit.c b/drivers/net/wireless/b43/xmit.c
index 8d54502222a6..9dda8169f7cc 100644
--- a/drivers/net/wireless/b43/xmit.c
+++ b/drivers/net/wireless/b43/xmit.c
@@ -192,7 +192,7 @@ int b43_generate_txhdr(struct b43_wldev *dev,
         const struct b43_phy *phy = &dev->phy;
         const struct ieee80211_hdr *wlhdr =
             (const struct ieee80211_hdr *)fragment_data;
-        int use_encryption = (!(info->flags & IEEE80211_TX_CTL_DO_NOT_ENCRYPT));
+        int use_encryption = !!info->control.hw_key;
         __le16 fctl = wlhdr->frame_control;
         struct ieee80211_rate *fbrate;
         u8 rate, rate_fb;
diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c
index a1b8bf3ee732..2541c81932f0 100644
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -3702,8 +3702,7 @@ static int b43legacy_wireless_init(struct ssb_device *dev)
         }
 
         /* fill hw info */
-        hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
-                    IEEE80211_HW_RX_INCLUDES_FCS |
+        hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
                     IEEE80211_HW_SIGNAL_DBM |
                     IEEE80211_HW_NOISE_DBM;
         hw->queues = 1; /* FIXME: hardware has more queues */
@@ -3846,10 +3845,10 @@ static int b43legacy_resume(struct ssb_device *dev)
                         goto out;
                 }
         }
-        mutex_unlock(&wl->mutex);
 
         b43legacydbg(wl, "Device resumed.\n");
 out:
+        mutex_unlock(&wl->mutex);
         return err;
 }
 
diff --git a/drivers/net/wireless/b43legacy/xmit.c b/drivers/net/wireless/b43legacy/xmit.c
index e969ed8d412d..68e1f8c78727 100644
--- a/drivers/net/wireless/b43legacy/xmit.c
+++ b/drivers/net/wireless/b43legacy/xmit.c
@@ -192,7 +192,7 @@ static int generate_txhdr_fw3(struct b43legacy_wldev *dev,
                                u16 cookie)
 {
         const struct ieee80211_hdr *wlhdr;
-        int use_encryption = (!(info->flags & IEEE80211_TX_CTL_DO_NOT_ENCRYPT));
+        int use_encryption = !!info->control.hw_key;
         u16 fctl;
         u8 rate;
         struct ieee80211_rate *rate_fb;
diff --git a/drivers/net/wireless/ipw2100.c b/drivers/net/wireless/ipw2100.c
index 5bf9e00b070c..c6f886ec08a3 100644
--- a/drivers/net/wireless/ipw2100.c
+++ b/drivers/net/wireless/ipw2100.c
@@ -6442,6 +6442,7 @@ static int ipw2100_resume(struct pci_dev *pci_dev)
         if (err) {
                 printk(KERN_ERR "%s: pci_enable_device failed on resume\n",
                        dev->name);
+                mutex_unlock(&priv->action_mutex);
                 return err;
         }
         pci_restore_state(pci_dev);
@@ -7146,7 +7147,7 @@ static int ipw2100_wx_get_rate(struct net_device *dev,
         err = ipw2100_get_ordinal(priv, IPW_ORD_CURRENT_TX_RATE, &val, &len);
         if (err) {
                 IPW_DEBUG_WX("failed querying ordinals.\n");
-                return err;
+                goto done;
         }
 
         switch (val & TX_RATE_MASK) {
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c
index c2a76785b665..a51e0eaa1334 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.c
@@ -630,7 +630,9 @@ static void iwl3945_pass_packet_to_mac80211(struct iwl3945_priv *priv,
                                    struct ieee80211_rx_status *stats)
 {
         struct iwl3945_rx_packet *pkt = (struct iwl3945_rx_packet *)rxb->skb->data;
+#ifdef CONFIG_IWL3945_LEDS
         struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)IWL_RX_DATA(pkt);
+#endif
         struct iwl3945_rx_frame_hdr *rx_hdr = IWL_RX_HDR(pkt);
         struct iwl3945_rx_frame_end *rx_end = IWL_RX_END(pkt);
         short len = le16_to_cpu(rx_hdr->len);
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index a44188bf4459..e3427c205ccf 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -818,8 +818,7 @@ int iwl_setup_mac(struct iwl_priv *priv)
         hw->rate_control_algorithm = "iwl-4965-rs";
 
         /* Tell mac80211 our characteristics */
-        hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
-                    IEEE80211_HW_SIGNAL_DBM |
+        hw->flags = IEEE80211_HW_SIGNAL_DBM |
                     IEEE80211_HW_NOISE_DBM;
         /* Default value; 4 EDCA QOS priorities */
         hw->queues = 4;
diff --git a/drivers/net/wireless/iwlwifi/iwl-debug.h b/drivers/net/wireless/iwlwifi/iwl-debug.h
index 58384805a494..d6d729e86bdb 100644
--- a/drivers/net/wireless/iwlwifi/iwl-debug.h
+++ b/drivers/net/wireless/iwlwifi/iwl-debug.h
@@ -68,12 +68,8 @@ void iwl_dbgfs_unregister(struct iwl_priv *priv);
 #endif
 
 #else
-static inline void IWL_DEBUG(int level, const char *fmt, ...)
-{
-}
-static inline void IWL_DEBUG_LIMIT(int level, const char *fmt, ...)
-{
-}
+#define IWL_DEBUG(level, fmt, args...)
+#define IWL_DEBUG_LIMIT(level, fmt, args...)
 #endif                          /* CONFIG_IWLWIFI_DEBUG */
 
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-led.c b/drivers/net/wireless/iwlwifi/iwl-led.c
index 899d7a2567a8..61250e6a7d1b 100644
--- a/drivers/net/wireless/iwlwifi/iwl-led.c
+++ b/drivers/net/wireless/iwlwifi/iwl-led.c
@@ -268,7 +268,9 @@ static int iwl_get_blink_rate(struct iwl_priv *priv)
         if (tpt < 0) /* wrapparound */
                 tpt = -tpt;
 
-        IWL_DEBUG_LED("tpt %lld current_tpt %lld\n", tpt, current_tpt);
+        IWL_DEBUG_LED("tpt %lld current_tpt %llu\n",
+                (long long)tpt,
+                (unsigned long long)current_tpt);
         priv->led_tpt = current_tpt;
 
         if (!priv->allow_blinking)
diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c
index efc750d2fc5c..5a00ac23e2d0 100644
--- a/drivers/net/wireless/iwlwifi/iwl-scan.c
+++ b/drivers/net/wireless/iwlwifi/iwl-scan.c
@@ -270,6 +270,7 @@ static void iwl_rx_scan_results_notif(struct iwl_priv *priv,
 static void iwl_rx_scan_complete_notif(struct iwl_priv *priv,
                                        struct iwl_rx_mem_buffer *rxb)
 {
+#ifdef CONFIG_IWLWIFI_DEBUG
         struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
         struct iwl_scancomplete_notification *scan_notif = (void *)pkt->u.raw;
 
@@ -277,6 +278,7 @@ static void iwl_rx_scan_complete_notif(struct iwl_priv *priv,
                        scan_notif->scanned_channels,
                        scan_notif->tsf_low,
                        scan_notif->tsf_high, scan_notif->status);
+#endif
 
         /* The HW is no longer scanning */
         clear_bit(STATUS_SCAN_HW, &priv->status);
diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c
index 9b50b1052b09..f72cd0bf6aa3 100644
--- a/drivers/net/wireless/iwlwifi/iwl-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-tx.c
@@ -906,7 +906,7 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
          * first entry */
         iwl_hw_txq_attach_buf_to_tfd(priv, tfd, txcmd_phys, len);
 
-        if (!(info->flags & IEEE80211_TX_CTL_DO_NOT_ENCRYPT))
+        if (info->control.hw_key)
                 iwl_tx_cmd_build_hwcrypto(priv, info, tx_cmd, skb, sta_id);
 
         /* Set up TFD's 2nd entry to point directly to remainder of skb,
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 4a22d3fba75b..7c82ecfa30a4 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -2667,7 +2667,7 @@ static int iwl3945_tx_skb(struct iwl3945_priv *priv, struct sk_buff *skb)
          * first entry */
         iwl3945_hw_txq_attach_buf_to_tfd(priv, tfd, txcmd_phys, len);
 
-        if (!(info->flags & IEEE80211_TX_CTL_DO_NOT_ENCRYPT))
+        if (info->control.hw_key)
                 iwl3945_build_tx_cmd_hwcrypto(priv, info, out_cmd, skb, 0);
 
         /* Set up TFD's 2nd entry to point directly to remainder of skb,
@@ -7899,8 +7899,7 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e
         priv->ibss_beacon = NULL;
 
         /* Tell mac80211 our characteristics */
-        hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
-                    IEEE80211_HW_SIGNAL_DBM |
+        hw->flags = IEEE80211_HW_SIGNAL_DBM |
                     IEEE80211_HW_NOISE_DBM;
 
         /* 4 EDCA QOS priorities */
diff --git a/drivers/net/wireless/libertas/persistcfg.c b/drivers/net/wireless/libertas/persistcfg.c
index 6d0ff8decaf7..3309a9c3cfef 100644
--- a/drivers/net/wireless/libertas/persistcfg.c
+++ b/drivers/net/wireless/libertas/persistcfg.c
@@ -48,7 +48,7 @@ static ssize_t bootflag_get(struct device *dev,
         if (ret)
                 return ret;
 
-        return snprintf(buf, 12, "0x%x\n", le32_to_cpu(defs.bootflag));
+        return snprintf(buf, 12, "%d\n", le32_to_cpu(defs.bootflag));
 }
 
 /**
@@ -63,8 +63,8 @@ static ssize_t bootflag_set(struct device *dev, struct device_attribute *attr,
         int ret;
 
         memset(&cmd, 0, sizeof(cmd));
-        ret = sscanf(buf, "%x", &datum);
-        if (ret != 1)
+        ret = sscanf(buf, "%d", &datum);
+        if ((ret != 1) || (datum > 1))
                 return -EINVAL;
 
         *((__le32 *)&cmd.data[0]) = cpu_to_le32(!!datum);
@@ -91,7 +91,7 @@ static ssize_t boottime_get(struct device *dev,
         if (ret)
                 return ret;
 
-        return snprintf(buf, 12, "0x%x\n", defs.boottime);
+        return snprintf(buf, 12, "%d\n", defs.boottime);
 }
 
 /**
@@ -106,8 +106,8 @@ static ssize_t boottime_set(struct device *dev,
         int ret;
 
         memset(&cmd, 0, sizeof(cmd));
-        ret = sscanf(buf, "%x", &datum);
-        if (ret != 1)
+        ret = sscanf(buf, "%d", &datum);
+        if ((ret != 1) || (datum > 255))
                 return -EINVAL;
 
         /* A too small boot time will result in the device booting into
@@ -143,7 +143,7 @@ static ssize_t channel_get(struct device *dev,
         if (ret)
                 return ret;
 
-        return snprintf(buf, 12, "0x%x\n", le16_to_cpu(defs.channel));
+        return snprintf(buf, 12, "%d\n", le16_to_cpu(defs.channel));
 }
 
 /**
@@ -154,11 +154,11 @@ static ssize_t channel_set(struct device *dev, struct device_attribute *attr,
 {
         struct lbs_private *priv = to_net_dev(dev)->priv;
         struct cmd_ds_mesh_config cmd;
-        uint16_t datum;
+        uint32_t datum;
         int ret;
 
         memset(&cmd, 0, sizeof(cmd));
-        ret = sscanf(buf, "%hx", &datum);
+        ret = sscanf(buf, "%d", &datum);
         if (ret != 1 || datum < 1 || datum > 11)
                 return -EINVAL;
 
@@ -274,8 +274,8 @@ static ssize_t protocol_id_set(struct device *dev,
         int ret;
 
         memset(&cmd, 0, sizeof(cmd));
-        ret = sscanf(buf, "%x", &datum);
-        if (ret != 1)
+        ret = sscanf(buf, "%d", &datum);
+        if ((ret != 1) || (datum > 255))
                 return -EINVAL;
 
         /* fetch all other Information Element parameters */
@@ -328,8 +328,8 @@ static ssize_t metric_id_set(struct device *dev, struct device_attribute *attr,
         int ret;
 
         memset(&cmd, 0, sizeof(cmd));
-        ret = sscanf(buf, "%x", &datum);
-        if (ret != 1)
+        ret = sscanf(buf, "%d", &datum);
+        if ((ret != 1) || (datum > 255))
                 return -EINVAL;
 
         /* fetch all other Information Element parameters */
@@ -382,8 +382,8 @@ static ssize_t capability_set(struct device *dev, struct device_attribute *attr,
         int ret;
 
         memset(&cmd, 0, sizeof(cmd));
-        ret = sscanf(buf, "%x", &datum);
-        if (ret != 1)
+        ret = sscanf(buf, "%d", &datum);
+        if ((ret != 1) || (datum > 255))
                 return -EINVAL;
 
         /* fetch all other Information Element parameters */
diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index 5816230d58f8..248d31a7aa33 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -500,7 +500,7 @@ failed_hw:
         device_unregister(data->dev);
 failed_drvdata:
         ieee80211_free_hw(hw);
-        hwsim_radios[i] = 0;
+        hwsim_radios[i] = NULL;
 failed:
         mac80211_hwsim_free();
         return err;
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index 3558cb210747..3078417b326b 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -1121,6 +1121,7 @@ static void rt2500usb_write_beacon(struct queue_entry *entry)
         int pipe = usb_sndbulkpipe(usb_dev, 1);
         int length;
         u16 reg;
+        u32 word, len;
 
         /*
          * Add the descriptor in front of the skb.
@@ -1130,6 +1131,17 @@ static void rt2500usb_write_beacon(struct queue_entry *entry)
         skbdesc->desc = entry->skb->data;
 
         /*
+         * Adjust the beacon databyte count. The current number is
+         * calculated before this function gets called, but falsely
+         * assumes that the descriptor was already present in the SKB.
+         */
+        rt2x00_desc_read(skbdesc->desc, 0, &word);
+        len  = rt2x00_get_field32(word, TXD_W0_DATABYTE_COUNT);
+        len += skbdesc->desc_len;
+        rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, len);
+        rt2x00_desc_write(skbdesc->desc, 0, word);
+
+        /*
          * Disable beaconing while we are reloading the beacon data,
          * otherwise we might be sending out invalid data.
          */
@@ -1650,7 +1662,6 @@ static void rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
          * Initialize all hw fields.
          */
         rt2x00dev->hw->flags =
-            IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
             IEEE80211_HW_RX_INCLUDES_FCS |
             IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
             IEEE80211_HW_SIGNAL_DBM;
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 07b03b3c7ef1..db2dc976d831 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -108,7 +108,10 @@
 #define SHORT_PIFS              ( SIFS + SHORT_SLOT_TIME )
 #define DIFS                    ( PIFS + SLOT_TIME )
 #define SHORT_DIFS              ( SHORT_PIFS + SHORT_SLOT_TIME )
-#define EIFS                    ( SIFS + (8 * (IEEE80211_HEADER + ACK_SIZE)) )
+#define EIFS                    ( SIFS + DIFS + \
+                                  (8 * (IEEE80211_HEADER + ACK_SIZE)) )
+#define SHORT_EIFS              ( SIFS + SHORT_DIFS + \
+                                  (8 * (IEEE80211_HEADER + ACK_SIZE)) )
 
 /*
  * Chipset identification
@@ -597,6 +600,7 @@ enum rt2x00_flags {
         DEVICE_STARTED_SUSPEND,
         DEVICE_ENABLED_RADIO,
         DEVICE_DISABLED_RADIO_HW,
+        DEVICE_DIRTY_CONFIG,
 
         /*
          * Driver features
diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c
index f20ca712504f..3f89516e8332 100644
--- a/drivers/net/wireless/rt2x00/rt2x00config.c
+++ b/drivers/net/wireless/rt2x00/rt2x00config.c
@@ -271,7 +271,7 @@ config:
                 libconf.sifs = SIFS;
                 libconf.pifs = short_slot_time ? SHORT_PIFS : PIFS;
                 libconf.difs = short_slot_time ? SHORT_DIFS : DIFS;
-                libconf.eifs = EIFS;
+                libconf.eifs = short_slot_time ? SHORT_EIFS : EIFS;
         }
 
         libconf.conf = conf;
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 8c93eb8353b0..f42283ad7b02 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -1013,6 +1013,7 @@ int rt2x00lib_start(struct rt2x00_dev *rt2x00dev)
         rt2x00dev->intf_associated = 0;
 
         __set_bit(DEVICE_STARTED, &rt2x00dev->flags);
+        __set_bit(DEVICE_DIRTY_CONFIG, &rt2x00dev->flags);
 
         return 0;
 }
@@ -1237,9 +1238,9 @@ int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev)
         /*
          * Reconfigure device.
          */
-        rt2x00lib_config(rt2x00dev, &rt2x00dev->hw->conf, 1);
-        if (!rt2x00dev->hw->conf.radio_enabled)
-                rt2x00lib_disable_radio(rt2x00dev);
+        retval = rt2x00mac_config(rt2x00dev->hw, &rt2x00dev->hw->conf);
+        if (retval)
+                goto exit;
 
         /*
          * Iterator over each active interface to
diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h
index f2c9b0e79b5f..c5fb3a72cf37 100644
--- a/drivers/net/wireless/rt2x00/rt2x00lib.h
+++ b/drivers/net/wireless/rt2x00/rt2x00lib.h
@@ -125,13 +125,6 @@ void rt2x00queue_unmap_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb);
 void rt2x00queue_free_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb);
 
 /**
- * rt2x00queue_free_skb - free a skb
- * @rt2x00dev: Pointer to &struct rt2x00_dev.
- * @skb: The skb to free.
- */
-void rt2x00queue_free_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb);
-
-/**
  * rt2x00queue_write_tx_frame - Write TX frame to hardware
  * @queue: Queue over which the frame should be send
  * @skb: The skb to send
diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c
index f1dcbaa80c3c..c3ee4ecba792 100644
--- a/drivers/net/wireless/rt2x00/rt2x00mac.c
+++ b/drivers/net/wireless/rt2x00/rt2x00mac.c
@@ -63,7 +63,7 @@ static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev,
          */
         memcpy(skb->cb, frag_skb->cb, sizeof(skb->cb));
         rts_info = IEEE80211_SKB_CB(skb);
-        rts_info->flags |= IEEE80211_TX_CTL_DO_NOT_ENCRYPT;
+        rts_info->control.hw_key = NULL;
         rts_info->flags &= ~IEEE80211_TX_CTL_USE_RTS_CTS;
         rts_info->flags &= ~IEEE80211_TX_CTL_USE_CTS_PROTECT;
         rts_info->flags &= ~IEEE80211_TX_CTL_REQ_TX_STATUS;
@@ -83,6 +83,7 @@ static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev,
                                   (struct ieee80211_rts *)(skb->data));
 
         if (rt2x00queue_write_tx_frame(queue, skb)) {
+                dev_kfree_skb_any(skb);
                 WARNING(rt2x00dev, "Failed to send RTS/CTS frame.\n");
                 return NETDEV_TX_BUSY;
         }
@@ -96,7 +97,6 @@ int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
         struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
         struct ieee80211_hdr *ieee80211hdr = (struct ieee80211_hdr *)skb->data;
         enum data_queue_qid qid = skb_get_queue_mapping(skb);
-        struct rt2x00_intf *intf = vif_to_intf(tx_info->control.vif);
         struct data_queue *queue;
         u16 frame_control;
 
@@ -152,18 +152,6 @@ int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
                 }
         }
 
-        /*
-         * XXX: This is as wrong as the old mac80211 code was,
-         *      due to beacons not getting sequence numbers assigned
-         *      properly.
-         */
-        if (tx_info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
-                if (tx_info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT)
-                        intf->seqno += 0x10;
-                ieee80211hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
-                ieee80211hdr->seq_ctrl |= cpu_to_le16(intf->seqno);
-        }
-
         if (rt2x00queue_write_tx_frame(queue, skb)) {
                 ieee80211_stop_queue(rt2x00dev->hw, qid);
                 return NETDEV_TX_BUSY;
@@ -322,6 +310,7 @@ EXPORT_SYMBOL_GPL(rt2x00mac_remove_interface);
 int rt2x00mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf)
 {
         struct rt2x00_dev *rt2x00dev = hw->priv;
+        int force_reconfig;
 
         /*
          * Mac80211 might be calling this function while we are trying
@@ -341,7 +330,17 @@ int rt2x00mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf)
                         rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
         }
 
-        rt2x00lib_config(rt2x00dev, conf, 0);
+        /*
+         * When the DEVICE_DIRTY_CONFIG flag is set, the device has recently
+         * been started and the configuration must be forced upon the hardware.
+         * Otherwise registers will not be intialized correctly and could
+         * result in non-working hardware because essential registers aren't
+         * initialized.
+         */
+        force_reconfig =
+            __test_and_clear_bit(DEVICE_DIRTY_CONFIG, &rt2x00dev->flags);
+
+        rt2x00lib_config(rt2x00dev, conf, force_reconfig);
 
         /*
          * Reenable RX only if the radio should be on.
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index 7f442030f5ad..3b27f6aa860c 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -120,6 +120,7 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry,
 {
         struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
         struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb);
+        struct rt2x00_intf *intf = vif_to_intf(tx_info->control.vif);
         struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)entry->skb->data;
         struct ieee80211_rate *rate =
             ieee80211_get_tx_rate(rt2x00dev->hw, tx_info);
@@ -200,6 +201,31 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry,
         }
 
         /*
+         * Hardware should insert sequence counter.
+         * FIXME: We insert a software sequence counter first for
+         * hardware that doesn't support hardware sequence counting.
+         *
+         * This is wrong because beacons are not getting sequence
+         * numbers assigned properly.
+         *
+         * A secondary problem exists for drivers that cannot toggle
+         * sequence counting per-frame, since those will override the
+         * sequence counter given by mac80211.
+         */
+        if (tx_info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
+                spin_lock(&intf->lock);
+
+                if (test_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags))
+                        intf->seqno += 0x10;
+                hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
+                hdr->seq_ctrl |= cpu_to_le16(intf->seqno);
+
+                spin_unlock(&intf->lock);
+
+                __set_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags);
+        }
+
+        /*
          * PLCP setup
          * Length calculation depends on OFDM/CCK rate.
          */
@@ -466,9 +492,12 @@ void rt2x00queue_init_rx(struct rt2x00_dev *rt2x00dev)
         if (!rt2x00dev->ops->lib->init_rxentry)
                 return;
 
-        for (i = 0; i < queue->limit; i++)
+        for (i = 0; i < queue->limit; i++) {
+                queue->entries[i].flags = 0;
+
                 rt2x00dev->ops->lib->init_rxentry(rt2x00dev,
                                                   &queue->entries[i]);
+        }
 }
 
 void rt2x00queue_init_tx(struct rt2x00_dev *rt2x00dev)
@@ -482,9 +511,12 @@ void rt2x00queue_init_tx(struct rt2x00_dev *rt2x00dev)
                 if (!rt2x00dev->ops->lib->init_txentry)
                         continue;
 
-                for (i = 0; i < queue->limit; i++)
+                for (i = 0; i < queue->limit; i++) {
+                        queue->entries[i].flags = 0;
+
                         rt2x00dev->ops->lib->init_txentry(rt2x00dev,
                                                           &queue->entries[i]);
+                }
         }
 }
 
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h
index 8945945c892e..a4a8c57004db 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.h
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.h
@@ -199,6 +199,7 @@ struct txdone_entry_desc {
  * @ENTRY_TXD_RTS_FRAME: This frame is a RTS frame.
  * @ENTRY_TXD_CTS_FRAME: This frame is a CTS-to-self frame.
  * @ENTRY_TXD_OFDM_RATE: This frame is send out with an OFDM rate.
+ * @ENTRY_TXD_GENERATE_SEQ: This frame requires sequence counter.
  * @ENTRY_TXD_FIRST_FRAGMENT: This is the first frame.
  * @ENTRY_TXD_MORE_FRAG: This frame is followed by another fragment.
  * @ENTRY_TXD_REQ_TIMESTAMP: Require timestamp to be inserted.
@@ -210,6 +211,7 @@ enum txentry_desc_flags {
         ENTRY_TXD_RTS_FRAME,
         ENTRY_TXD_CTS_FRAME,
         ENTRY_TXD_OFDM_RATE,
+        ENTRY_TXD_GENERATE_SEQ,
         ENTRY_TXD_FIRST_FRAGMENT,
         ENTRY_TXD_MORE_FRAG,
         ENTRY_TXD_REQ_TIMESTAMP,
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c
index 83862e7f7aec..933e6cc9359d 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.c
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.c
@@ -122,6 +122,38 @@ int rt2x00usb_vendor_request_buff(struct rt2x00_dev *rt2x00dev,
 }
 EXPORT_SYMBOL_GPL(rt2x00usb_vendor_request_buff);
 
+int rt2x00usb_vendor_request_large_buff(struct rt2x00_dev *rt2x00dev,
+                                        const u8 request, const u8 requesttype,
+                                        const u16 offset, void *buffer,
+                                        const u16 buffer_length,
+                                        const int timeout)
+{
+        int status = 0;
+        unsigned char *tb;
+        u16 off, len, bsize;
+
+        mutex_lock(&rt2x00dev->usb_cache_mutex);
+
+        tb  = buffer;
+        off = offset;
+        len = buffer_length;
+        while (len && !status) {
+                bsize = min_t(u16, CSR_CACHE_SIZE, len);
+                status = rt2x00usb_vendor_req_buff_lock(rt2x00dev, request,
+                                                        requesttype, off, tb,
+                                                        bsize, timeout);
+
+                tb  += bsize;
+                len -= bsize;
+                off += bsize;
+        }
+
+        mutex_unlock(&rt2x00dev->usb_cache_mutex);
+
+        return status;
+}
+EXPORT_SYMBOL_GPL(rt2x00usb_vendor_request_large_buff);
+
 /*
  * TX data handlers.
  */
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.h b/drivers/net/wireless/rt2x00/rt2x00usb.h
index aad794adf52c..ee3875f894aa 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.h
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.h
@@ -70,8 +70,7 @@
 /*
  * Cache size
  */
-#define CSR_CACHE_SIZE                  8
-#define CSR_CACHE_SIZE_FIRMWARE         64
+#define CSR_CACHE_SIZE                  64
 
 /*
  * USB request types.
@@ -172,6 +171,25 @@ int rt2x00usb_vendor_req_buff_lock(struct rt2x00_dev *rt2x00dev,
                                    const u16 buffer_length, const int timeout);
 
 /**
+ * rt2x00usb_vendor_request_large_buff - Send register command to device (buffered)
+ * @rt2x00dev: Pointer to &struct rt2x00_dev
+ * @request: USB vendor command (See &enum rt2x00usb_vendor_request)
+ * @requesttype: Request type &USB_VENDOR_REQUEST_*
+ * @offset: Register start offset to perform action on
+ * @buffer: Buffer where information will be read/written to by device
+ * @buffer_length: Size of &buffer
+ * @timeout: Operation timeout
+ *
+ * This function is used to transfer register data in blocks larger
+ * then CSR_CACHE_SIZE. Use for firmware upload, keys and beacons.
+ */
+int rt2x00usb_vendor_request_large_buff(struct rt2x00_dev *rt2x00dev,
+                                        const u8 request, const u8 requesttype,
+                                        const u16 offset, void *buffer,
+                                        const u16 buffer_length,
+                                        const int timeout);
+
+/**
  * rt2x00usb_vendor_request_sw - Send single register command to device
  * @rt2x00dev: Pointer to &struct rt2x00_dev
  * @request: USB vendor command (See &enum rt2x00usb_vendor_request)
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index f7c1f92c1448..fbe2a652e014 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -1544,7 +1544,8 @@ static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
         rt2x00_set_field32(&word, TXD_W1_CWMIN, txdesc->cw_min);
         rt2x00_set_field32(&word, TXD_W1_CWMAX, txdesc->cw_max);
         rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, IEEE80211_HEADER);
-        rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE, 1);
+        rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE,
+                           test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags));
         rt2x00_set_field32(&word, TXD_W1_BUFFER_COUNT, 1);
         rt2x00_desc_write(txd, 1, word);
 
@@ -2278,7 +2279,6 @@ static void rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
          * Initialize all hw fields.
          */
         rt2x00dev->hw->flags =
-            IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
             IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
             IEEE80211_HW_SIGNAL_DBM;
         rt2x00dev->hw->extra_tx_headroom = 0;
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index d383735ab8f2..9761eaaa08be 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -890,9 +890,6 @@ static int rt73usb_load_firmware(struct rt2x00_dev *rt2x00dev, const void *data,
         unsigned int i;
         int status;
         u32 reg;
-        const char *ptr = data;
-        char *cache;
-        int buflen;
 
         /*
          * Wait for stable hardware.
@@ -911,31 +908,12 @@ static int rt73usb_load_firmware(struct rt2x00_dev *rt2x00dev, const void *data,
 
         /*
          * Write firmware to device.
-         * We setup a seperate cache for this action,
-         * since we are going to write larger chunks of data
-         * then normally used cache size.
          */
-        cache = kmalloc(CSR_CACHE_SIZE_FIRMWARE, GFP_KERNEL);
-        if (!cache) {
-                ERROR(rt2x00dev, "Failed to allocate firmware cache.\n");
-                return -ENOMEM;
-        }
-
-        for (i = 0; i < len; i += CSR_CACHE_SIZE_FIRMWARE) {
-                buflen = min_t(int, len - i, CSR_CACHE_SIZE_FIRMWARE);
-
-                memcpy(cache, ptr, buflen);
-
-                rt2x00usb_vendor_request(rt2x00dev, USB_MULTI_WRITE,
-                                         USB_VENDOR_REQUEST_OUT,
-                                         FIRMWARE_IMAGE_BASE + i, 0,
-                                         cache, buflen,
-                                         REGISTER_TIMEOUT32(buflen));
-
-                ptr += buflen;
-        }
-
-        kfree(cache);
+        rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
+                                            USB_VENDOR_REQUEST_OUT,
+                                            FIRMWARE_IMAGE_BASE,
+                                            data, len,
+                                            REGISTER_TIMEOUT32(len));
 
         /*
          * Send firmware request to device to load firmware,
@@ -1303,7 +1281,8 @@ static void rt73usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
         rt2x00_set_field32(&word, TXD_W1_CWMIN, txdesc->cw_min);
         rt2x00_set_field32(&word, TXD_W1_CWMAX, txdesc->cw_max);
         rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, IEEE80211_HEADER);
-        rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE, 1);
+        rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE,
+                           test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags));
         rt2x00_desc_write(txd, 1, word);
 
         rt2x00_desc_read(txd, 2, &word);
@@ -1352,6 +1331,7 @@ static void rt73usb_write_beacon(struct queue_entry *entry)
         struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
         unsigned int beacon_base;
         u32 reg;
+        u32 word, len;
 
         /*
          * Add the descriptor in front of the skb.
@@ -1361,6 +1341,17 @@ static void rt73usb_write_beacon(struct queue_entry *entry)
         skbdesc->desc = entry->skb->data;
 
         /*
+         * Adjust the beacon databyte count. The current number is
+         * calculated before this function gets called, but falsely
+         * assumes that the descriptor was already present in the SKB.
+         */
+        rt2x00_desc_read(skbdesc->desc, 0, &word);
+        len  = rt2x00_get_field32(word, TXD_W0_DATABYTE_COUNT);
+        len += skbdesc->desc_len;
+        rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, len);
+        rt2x00_desc_write(skbdesc->desc, 0, word);
+
+        /*
          * Disable beaconing while we are reloading the beacon data,
          * otherwise we might be sending out invalid data.
          */
@@ -1374,10 +1365,10 @@ static void rt73usb_write_beacon(struct queue_entry *entry)
          * Write entire beacon with descriptor to register.
          */
         beacon_base = HW_BEACON_OFFSET(entry->entry_idx);
-        rt2x00usb_vendor_request(rt2x00dev, USB_MULTI_WRITE,
-                                 USB_VENDOR_REQUEST_OUT, beacon_base, 0,
-                                 entry->skb->data, entry->skb->len,
-                                 REGISTER_TIMEOUT32(entry->skb->len));
+        rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
+                                            USB_VENDOR_REQUEST_OUT, beacon_base,
+                                            entry->skb->data, entry->skb->len,
+                                            REGISTER_TIMEOUT32(entry->skb->len));
 
         /*
          * Clean up the beacon skb.
@@ -1871,7 +1862,6 @@ static void rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
          * Initialize all hw fields.
          */
         rt2x00dev->hw->flags =
-            IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
             IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
             IEEE80211_HW_SIGNAL_DBM;
         rt2x00dev->hw->extra_tx_headroom = TXD_DESC_SIZE;
diff --git a/drivers/net/wireless/rtl8187.h b/drivers/net/wireless/rtl8187.h
index 3afb49f8866a..1b0d750f6623 100644
--- a/drivers/net/wireless/rtl8187.h
+++ b/drivers/net/wireless/rtl8187.h
@@ -47,11 +47,13 @@ struct rtl8187_rx_hdr {
 struct rtl8187b_rx_hdr {
         __le32 flags;
         __le64 mac_time;
-        u8 noise;
-        u8 signal;
+        u8 sq;
+        u8 rssi;
         u8 agc;
-        u8 reserved;
-        __le32 unused;
+        u8 flags2;
+        __le16 snr_long2end;
+        s8 pwdb_g12;
+        u8 fot;
 } __attribute__((packed));
 
 /* {rtl8187,rtl8187b}_tx_info is in skb */
@@ -100,6 +102,7 @@ struct rtl8187_priv {
         struct usb_device *udev;
         u32 rx_conf;
         u16 txpwr_base;
+        u16 seqno;
         u8 asic_rev;
         u8 is_rtl8187b;
         enum {
diff --git a/drivers/net/wireless/rtl8187_dev.c b/drivers/net/wireless/rtl8187_dev.c
index d3067b1216ca..177988efd660 100644
--- a/drivers/net/wireless/rtl8187_dev.c
+++ b/drivers/net/wireless/rtl8187_dev.c
@@ -169,6 +169,7 @@ static int rtl8187_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
 {
         struct rtl8187_priv *priv = dev->priv;
         struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+        struct ieee80211_hdr *ieee80211hdr = (struct ieee80211_hdr *)skb->data;
         unsigned int ep;
         void *buf;
         struct urb *urb;
@@ -234,6 +235,20 @@ static int rtl8187_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
                         ep = epmap[skb_get_queue_mapping(skb)];
         }
 
+        /* FIXME: The sequence that follows is needed for this driver to
+         * work with mac80211 since "mac80211: fix TX sequence numbers".
+         * As with the temporary code in rt2x00, changes will be needed
+         * to get proper sequence numbers on beacons. In addition, this
+         * patch places the sequence number in the hardware state, which
+         * limits us to a single virtual state.
+         */
+        if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
+                if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT)
+                        priv->seqno += 0x10;
+                ieee80211hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
+                ieee80211hdr->seq_ctrl |= cpu_to_le16(priv->seqno);
+        }
+
         info->driver_data[0] = dev;
         info->driver_data[1] = urb;
 
@@ -257,6 +272,7 @@ static void rtl8187_rx_cb(struct urb *urb)
         struct ieee80211_rx_status rx_status = { 0 };
         int rate, signal;
         u32 flags;
+        u32 quality;
 
         spin_lock(&priv->rx_queue.lock);
         if (skb->next)
@@ -280,44 +296,57 @@ static void rtl8187_rx_cb(struct urb *urb)
                 flags = le32_to_cpu(hdr->flags);
                 signal = hdr->signal & 0x7f;
                 rx_status.antenna = (hdr->signal >> 7) & 1;
-                rx_status.signal = signal;
                 rx_status.noise = hdr->noise;
                 rx_status.mactime = le64_to_cpu(hdr->mac_time);
-                priv->signal = signal;
                 priv->quality = signal;
+                rx_status.qual = priv->quality;
                 priv->noise = hdr->noise;
+                rate = (flags >> 20) & 0xF;
+                if (rate > 3) { /* OFDM rate */
+                        if (signal > 90)
+                                signal = 90;
+                        else if (signal < 25)
+                                signal = 25;
+                        signal = 90 - signal;
+                } else {        /* CCK rate */
+                        if (signal > 95)
+                                signal = 95;
+                        else if (signal < 30)
+                                signal = 30;
+                        signal = 95 - signal;
+                }
+                rx_status.signal = signal;
+                priv->signal = signal;
         } else {
                 struct rtl8187b_rx_hdr *hdr =
                         (typeof(hdr))(skb_tail_pointer(skb) - sizeof(*hdr));
+                /* The Realtek datasheet for the RTL8187B shows that the RX
+                 * header contains the following quantities: signal quality,
+                 * RSSI, AGC, the received power in dB, and the measured SNR.
+                 * In testing, none of these quantities show qualitative
+                 * agreement with AP signal strength, except for the AGC,
+                 * which is inversely proportional to the strength of the
+                 * signal. In the following, the quality and signal strength
+                 * are derived from the AGC. The arbitrary scaling constants
+                 * are chosen to make the results close to the values obtained
+                 * for a BCM4312 using b43 as the driver. The noise is ignored
+                 * for now.
+                 */
                 flags = le32_to_cpu(hdr->flags);
-                signal = hdr->agc >> 1;
-                rx_status.antenna = (hdr->signal >> 7) & 1;
-                rx_status.signal = 64 - min(hdr->noise, (u8)64);
-                rx_status.noise = hdr->noise;
+                quality = 170 - hdr->agc;
+                if (quality > 100)
+                        quality = 100;
+                signal = 14 - hdr->agc / 2;
+                rx_status.qual = quality;
+                priv->quality = quality;
+                rx_status.signal = signal;
+                priv->signal = signal;
+                rx_status.antenna = (hdr->rssi >> 7) & 1;
                 rx_status.mactime = le64_to_cpu(hdr->mac_time);
-                priv->signal = hdr->signal;
-                priv->quality = hdr->agc >> 1;
-                priv->noise = hdr->noise;
+                rate = (flags >> 20) & 0xF;
         }
 
         skb_trim(skb, flags & 0x0FFF);
-        rate = (flags >> 20) & 0xF;
-        if (rate > 3) { /* OFDM rate */
-                if (signal > 90)
-                        signal = 90;
-                else if (signal < 25)
-                        signal = 25;
-                signal = 90 - signal;
-        } else {        /* CCK rate */
-                if (signal > 95)
-                        signal = 95;
-                else if (signal < 30)
-                        signal = 30;
-                signal = 95 - signal;
-        }
-
-        rx_status.qual = priv->quality;
-        rx_status.signal = signal;
         rx_status.rate_idx = rate;
         rx_status.freq = dev->conf.channel->center_freq;
         rx_status.band = dev->conf.channel->band;
@@ -1015,9 +1044,7 @@ static int __devinit rtl8187_probe(struct usb_interface *intf,
 
         priv->mode = IEEE80211_IF_TYPE_MNTR;
         dev->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
-                     IEEE80211_HW_RX_INCLUDES_FCS |
-                     IEEE80211_HW_SIGNAL_UNSPEC;
-        dev->max_signal = 65;
+                     IEEE80211_HW_RX_INCLUDES_FCS;
 
         eeprom.data = dev;
         eeprom.register_read = rtl8187_eeprom_register_read;
@@ -1132,10 +1159,16 @@ static int __devinit rtl8187_probe(struct usb_interface *intf,
                 (*channel++).hw_value = txpwr >> 8;
         }
 
-        if (priv->is_rtl8187b)
+        if (priv->is_rtl8187b) {
                 printk(KERN_WARNING "rtl8187: 8187B chip detected. Support "
                         "is EXPERIMENTAL, and could damage your\n"
                         "         hardware, use at your own risk\n");
+                dev->flags |= IEEE80211_HW_SIGNAL_DBM;
+        } else {
+                dev->flags |= IEEE80211_HW_SIGNAL_UNSPEC;
+                dev->max_signal = 65;
+        }
+
         if ((id->driver_info == DEVICE_RTL8187) && priv->is_rtl8187b)
                 printk(KERN_INFO "rtl8187: inconsistency between id with OEM"
                        " info!\n");
diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c
index fcc532bb6a7e..4d7b98b05030 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.c
+++ b/drivers/net/wireless/zd1211rw/zd_mac.c
@@ -935,7 +935,6 @@ struct ieee80211_hw *zd_mac_alloc_hw(struct usb_interface *intf)
         hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &mac->band;
 
         hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
-                    IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
                     IEEE80211_HW_SIGNAL_DB;
 
         hw->max_signal = 100;
diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig
index 1d7ec3129349..f821dbc952a4 100644
--- a/drivers/of/Kconfig
+++ b/drivers/of/Kconfig
@@ -13,3 +13,9 @@ config OF_I2C
         depends on PPC_OF && I2C
         help
           OpenFirmware I2C accessors
+
+config OF_SPI
+        def_tristate SPI
+        depends on OF && PPC_OF && SPI
+        help
+          OpenFirmware SPI accessors
diff --git a/drivers/of/Makefile b/drivers/of/Makefile
index 548772e871fd..4c3c6f8e36f5 100644
--- a/drivers/of/Makefile
+++ b/drivers/of/Makefile
@@ -2,3 +2,4 @@ obj-y = base.o
 obj-$(CONFIG_OF_DEVICE) += device.o platform.o
 obj-$(CONFIG_OF_GPIO)   += gpio.o
 obj-$(CONFIG_OF_I2C)    += of_i2c.o
+obj-$(CONFIG_OF_SPI)    += of_spi.o
diff --git a/drivers/of/base.c b/drivers/of/base.c
index 23ffb7c0caf2..ad8ac1a8af28 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -385,3 +385,91 @@ struct device_node *of_find_matching_node(struct device_node *from,
         return np;
 }
 EXPORT_SYMBOL(of_find_matching_node);
+
+/**
+ * of_modalias_table: Table of explicit compatible ==> modalias mappings
+ *
+ * This table allows particulare compatible property values to be mapped
+ * to modalias strings.  This is useful for busses which do not directly
+ * understand the OF device tree but are populated based on data contained
+ * within the device tree.  SPI and I2C are the two current users of this
+ * table.
+ *
+ * In most cases, devices do not need to be listed in this table because
+ * the modalias value can be derived directly from the compatible table.
+ * However, if for any reason a value cannot be derived, then this table
+ * provides a method to override the implicit derivation.
+ *
+ * At the moment, a single table is used for all bus types because it is
+ * assumed that the data size is small and that the compatible values
+ * should already be distinct enough to differentiate between SPI, I2C
+ * and other devices.
+ */
+struct of_modalias_table {
+        char *of_device;
+        char *modalias;
+};
+static struct of_modalias_table of_modalias_table[] = {
+        /* Empty for now; add entries as needed */
+};
+
+/**
+ * of_modalias_node - Lookup appropriate modalias for a device node
+ * @node:       pointer to a device tree node
+ * @modalias:   Pointer to buffer that modalias value will be copied into
+ * @len:        Length of modalias value
+ *
+ * Based on the value of the compatible property, this routine will determine
+ * an appropriate modalias value for a particular device tree node.  Three
+ * separate methods are used to derive a modalias value.
+ *
+ * First method is to lookup the compatible value in of_modalias_table.
+ * Second is to look for a "linux,<modalias>" entry in the compatible list
+ * and used that for modalias.  Third is to strip off the manufacturer
+ * prefix from the first compatible entry and use the remainder as modalias
+ *
+ * This routine returns 0 on success
+ */
+int of_modalias_node(struct device_node *node, char *modalias, int len)
+{
+        int i, cplen;
+        const char *compatible;
+        const char *p;
+
+        /* 1. search for exception list entry */
+        for (i = 0; i < ARRAY_SIZE(of_modalias_table); i++) {
+                compatible = of_modalias_table[i].of_device;
+                if (!of_device_is_compatible(node, compatible))
+                        continue;
+                strlcpy(modalias, of_modalias_table[i].modalias, len);
+                return 0;
+        }
+
+        compatible = of_get_property(node, "compatible", &cplen);
+        if (!compatible)
+                return -ENODEV;
+
+        /* 2. search for linux,<modalias> entry */
+        p = compatible;
+        while (cplen > 0) {
+                if (!strncmp(p, "linux,", 6)) {
+                        p += 6;
+                        strlcpy(modalias, p, len);
+                        return 0;
+                }
+
+                i = strlen(p) + 1;
+                p += i;
+                cplen -= i;
+        }
+
+        /* 3. take first compatible entry and strip manufacturer */
+        p = strchr(compatible, ',');
+        if (!p)
+                return -ENODEV;
+        p++;
+        strlcpy(modalias, p, len);
+        return 0;
+}
+EXPORT_SYMBOL_GPL(of_modalias_node);
+
diff --git a/drivers/of/of_i2c.c b/drivers/of/of_i2c.c
index 344e1b03dd8b..6a98dc8aa30b 100644
--- a/drivers/of/of_i2c.c
+++ b/drivers/of/of_i2c.c
@@ -16,62 +16,6 @@
 #include <linux/of_i2c.h>
 #include <linux/module.h>
 
-struct i2c_driver_device {
-        char    *of_device;
-        char    *i2c_type;
-};
-
-static struct i2c_driver_device i2c_devices[] = {
-};
-
-static int of_find_i2c_driver(struct device_node *node,
-                              struct i2c_board_info *info)
-{
-        int i, cplen;
-        const char *compatible;
-        const char *p;
-
-        /* 1. search for exception list entry */
-        for (i = 0; i < ARRAY_SIZE(i2c_devices); i++) {
-                if (!of_device_is_compatible(node, i2c_devices[i].of_device))
-                        continue;
-                if (strlcpy(info->type, i2c_devices[i].i2c_type,
-                            I2C_NAME_SIZE) >= I2C_NAME_SIZE)
-                        return -ENOMEM;
-
-                return 0;
-        }
-
-        compatible = of_get_property(node, "compatible", &cplen);
-        if (!compatible)
-                return -ENODEV;
-
-        /* 2. search for linux,<i2c-type> entry */
-        p = compatible;
-        while (cplen > 0) {
-                if (!strncmp(p, "linux,", 6)) {
-                        p += 6;
-                        if (strlcpy(info->type, p,
-                                    I2C_NAME_SIZE) >= I2C_NAME_SIZE)
-                                return -ENOMEM;
-                        return 0;
-                }
-
-                i = strlen(p) + 1;
-                p += i;
-                cplen -= i;
-        }
-
-        /* 3. take fist compatible entry and strip manufacturer */
-        p = strchr(compatible, ',');
-        if (!p)
-                return -ENODEV;
-        p++;
-        if (strlcpy(info->type, p, I2C_NAME_SIZE) >= I2C_NAME_SIZE)
-                return -ENOMEM;
-        return 0;
-}
-
 void of_register_i2c_devices(struct i2c_adapter *adap,
                              struct device_node *adap_node)
 {
@@ -83,6 +27,9 @@ void of_register_i2c_devices(struct i2c_adapter *adap,
                 const u32 *addr;
                 int len;
 
+                if (of_modalias_node(node, info.type, sizeof(info.type)) < 0)
+                        continue;
+
                 addr = of_get_property(node, "reg", &len);
                 if (!addr || len < sizeof(int) || *addr > (1 << 10) - 1) {
                         printk(KERN_ERR
@@ -92,11 +39,6 @@ void of_register_i2c_devices(struct i2c_adapter *adap,
 
                 info.irq = irq_of_parse_and_map(node, 0);
 
-                if (of_find_i2c_driver(node, &info) < 0) {
-                        irq_dispose_mapping(info.irq);
-                        continue;
-                }
-
                 info.addr = *addr;
 
                 request_module(info.type);
diff --git a/drivers/of/of_spi.c b/drivers/of/of_spi.c
new file mode 100644
index 000000000000..b01eec026f68
--- /dev/null
+++ b/drivers/of/of_spi.c
@@ -0,0 +1,93 @@
+/*
+ * SPI OF support routines
+ * Copyright (C) 2008 Secret Lab Technologies Ltd.
+ *
+ * Support routines for deriving SPI device attachments from the device
+ * tree.
+ */
+
+#include <linux/of.h>
+#include <linux/device.h>
+#include <linux/spi/spi.h>
+#include <linux/of_spi.h>
+
+/**
+ * of_register_spi_devices - Register child devices onto the SPI bus
+ * @master:     Pointer to spi_master device
+ * @np:         parent node of SPI device nodes
+ *
+ * Registers an spi_device for each child node of 'np' which has a 'reg'
+ * property.
+ */
+void of_register_spi_devices(struct spi_master *master, struct device_node *np)
+{
+        struct spi_device *spi;
+        struct device_node *nc;
+        const u32 *prop;
+        int rc;
+        int len;
+
+        for_each_child_of_node(np, nc) {
+                /* Alloc an spi_device */
+                spi = spi_alloc_device(master);
+                if (!spi) {
+                        dev_err(&master->dev, "spi_device alloc error for %s\n",
+                                nc->full_name);
+                        spi_dev_put(spi);
+                        continue;
+                }
+
+                /* Select device driver */
+                if (of_modalias_node(nc, spi->modalias,
+                                     sizeof(spi->modalias)) < 0) {
+                        dev_err(&master->dev, "cannot find modalias for %s\n",
+                                nc->full_name);
+                        spi_dev_put(spi);
+                        continue;
+                }
+
+                /* Device address */
+                prop = of_get_property(nc, "reg", &len);
+                if (!prop || len < sizeof(*prop)) {
+                        dev_err(&master->dev, "%s has no 'reg' property\n",
+                                nc->full_name);
+                        spi_dev_put(spi);
+                        continue;
+                }
+                spi->chip_select = *prop;
+
+                /* Mode (clock phase/polarity/etc.) */
+                if (of_find_property(nc, "spi-cpha", NULL))
+                        spi->mode |= SPI_CPHA;
+                if (of_find_property(nc, "spi-cpol", NULL))
+                        spi->mode |= SPI_CPOL;
+
+                /* Device speed */
+                prop = of_get_property(nc, "spi-max-frequency", &len);
+                if (!prop || len < sizeof(*prop)) {
+                        dev_err(&master->dev, "%s has no 'spi-max-frequency' property\n",
+                                nc->full_name);
+                        spi_dev_put(spi);
+                        continue;
+                }
+                spi->max_speed_hz = *prop;
+
+                /* IRQ */
+                spi->irq = irq_of_parse_and_map(nc, 0);
+
+                /* Store a pointer to the node in the device structure */
+                of_node_get(nc);
+                spi->dev.archdata.of_node = nc;
+
+                /* Register the new device */
+                request_module(spi->modalias);
+                rc = spi_add_device(spi);
+                if (rc) {
+                        dev_err(&master->dev, "spi_device register error %s\n",
+                                nc->full_name);
+                        spi_dev_put(spi);
+                }
+
+        }
+}
+EXPORT_SYMBOL(of_register_spi_devices);
diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index 1323a43285d7..ad27e9e225a6 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -1103,7 +1103,7 @@ static inline void dbg_ctrl(struct controller *ctrl)
         dbg("  Power Indicator      : %3s\n", PWR_LED(ctrl)    ? "yes" : "no");
         dbg("  Hot-Plug Surprise    : %3s\n", HP_SUPR_RM(ctrl) ? "yes" : "no");
         dbg("  EMI Present          : %3s\n", EMI(ctrl)        ? "yes" : "no");
-        dbg("  Comamnd Completed    : %3s\n", NO_CMD_CMPL(ctrl)? "no" : "yes");
+        dbg("  Command Completed    : %3s\n", NO_CMD_CMPL(ctrl)? "no" : "yes");
         pciehp_readw(ctrl, SLOTSTATUS, &reg16);
         dbg("Slot Status            : 0x%04x\n", reg16);
         pciehp_readw(ctrl, SLOTCTRL, &reg16);
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 15af618d36e2..18354817173c 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -126,7 +126,16 @@ static void msix_flush_writes(unsigned int irq)
         }
 }
 
-static void msi_set_mask_bits(unsigned int irq, u32 mask, u32 flag)
+/*
+ * PCI 2.3 does not specify mask bits for each MSI interrupt.  Attempting to
+ * mask all MSI interrupts by clearing the MSI enable bit does not work
+ * reliably as devices without an INTx disable bit will then generate a
+ * level IRQ which will never be cleared.
+ *
+ * Returns 1 if it succeeded in masking the interrupt and 0 if the device
+ * doesn't support MSI masking.
+ */
+static int msi_set_mask_bits(unsigned int irq, u32 mask, u32 flag)
 {
         struct msi_desc *entry;
 
@@ -144,8 +153,7 @@ static void msi_set_mask_bits(unsigned int irq, u32 mask, u32 flag)
                         mask_bits |= flag & mask;
                         pci_write_config_dword(entry->dev, pos, mask_bits);
                 } else {
-                        __msi_set_enable(entry->dev, entry->msi_attrib.pos,
-                                         !flag);
+                        return 0;
                 }
                 break;
         case PCI_CAP_ID_MSIX:
@@ -161,6 +169,7 @@ static void msi_set_mask_bits(unsigned int irq, u32 mask, u32 flag)
                 break;
         }
         entry->msi_attrib.masked = !!flag;
+        return 1;
 }
 
 void read_msi_msg(unsigned int irq, struct msi_msg *msg)
diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index 7764768b6a0e..89a2f0fa10f9 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -11,6 +11,7 @@
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/module.h>
+#include <linux/pci-aspm.h>
 #include <acpi/acpi.h>
 #include <acpi/acnamesp.h>
 #include <acpi/acresrc.h>
@@ -372,6 +373,12 @@ static int __init acpi_pci_init(void)
                 printk(KERN_INFO"ACPI FADT declares the system doesn't support MSI, so disable it\n");
                 pci_no_msi();
         }
+
+        if (acpi_gbl_FADT.boot_flags & BAF_PCIE_ASPM_CONTROL) {
+                printk(KERN_INFO"ACPI FADT declares the system doesn't support PCIe ASPM, so disable it\n");
+                pcie_no_aspm();
+        }
+
         ret = register_acpi_bus_type(&acpi_pci_bus);
         if (ret)
                 return 0;
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index e9c356236d27..0a3d856833fc 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -572,6 +572,10 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
                 if (!ret)
                         pci_update_current_state(dev);
         }
+        /* This device is quirked not to be put into D3, so
+           don't put it in D3 */
+        if (state == PCI_D3hot && (dev->dev_flags & PCI_DEV_FLAGS_NO_D3))
+                return 0;
 
         error = pci_raw_set_power_state(dev, state);
 
@@ -1123,6 +1127,12 @@ int pci_enable_wake(struct pci_dev *dev, pci_power_t state, int enable)
 }
 
 /**
+ * pci_target_state - find an appropriate low power state for a given PCI dev
+ * @dev: PCI device
+ *
+ * Use underlying platform code to find a supported low power state for @dev.
+ * If the platform can't manage @dev, return the deepest state from which it
+ * can generate wake events, based on any available PME info.
  */
 pci_power_t pci_target_state(struct pci_dev *dev)
 {
diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
index f82495583e63..9a7c9e1408a4 100644
--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -55,7 +55,7 @@ struct pcie_link_state {
         struct endpoint_state endpoints[8];
 };
 
-static int aspm_disabled;
+static int aspm_disabled, aspm_force;
 static DEFINE_MUTEX(aspm_lock);
 static LIST_HEAD(link_list);
 
@@ -510,6 +510,7 @@ static int pcie_aspm_sanity_check(struct pci_dev *pdev)
 {
         struct pci_dev *child_dev;
         int child_pos;
+        u32 reg32;
 
         /*
          * Some functions in a slot might not all be PCIE functions, very
@@ -519,6 +520,19 @@ static int pcie_aspm_sanity_check(struct pci_dev *pdev)
                 child_pos = pci_find_capability(child_dev, PCI_CAP_ID_EXP);
                 if (!child_pos)
                         return -EINVAL;
+
+                /*
+                 * Disable ASPM for pre-1.1 PCIe device, we follow MS to use
+                 * RBER bit to determine if a function is 1.1 version device
+                 */
+                pci_read_config_dword(child_dev, child_pos + PCI_EXP_DEVCAP,
+                        &reg32);
+                if (!(reg32 & PCI_EXP_DEVCAP_RBER && !aspm_force)) {
+                        printk("Pre-1.1 PCIe device detected, "
+                                "disable ASPM for %s. It can be enabled forcedly"
+                                " with 'pcie_aspm=force'\n", pci_name(pdev));
+                        return -EINVAL;
+                }
         }
         return 0;
 }
@@ -802,11 +816,23 @@ void pcie_aspm_remove_sysfs_dev_files(struct pci_dev *pdev)
 
 static int __init pcie_aspm_disable(char *str)
 {
-        aspm_disabled = 1;
+        if (!strcmp(str, "off")) {
+                aspm_disabled = 1;
+                printk(KERN_INFO "PCIe ASPM is disabled\n");
+        } else if (!strcmp(str, "force")) {
+                aspm_force = 1;
+                printk(KERN_INFO "PCIe ASPM is forcedly enabled\n");
+        }
         return 1;
 }
 
-__setup("pcie_noaspm", pcie_aspm_disable);
+__setup("pcie_aspm=", pcie_aspm_disable);
+
+void pcie_no_aspm(void)
+{
+        if (!aspm_force)
+                aspm_disabled = 1;
+}
 
 #ifdef CONFIG_ACPI
 #include <acpi/acpi_bus.h>
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index b1724cf31b66..7098dfb07449 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -163,12 +163,9 @@ static inline unsigned int pci_calc_resource_flags(unsigned int flags)
         return IORESOURCE_MEM;
 }
 
-/*
- * Find the extent of a PCI decode..
- */
-static u32 pci_size(u32 base, u32 maxbase, u32 mask)
+static u64 pci_size(u64 base, u64 maxbase, u64 mask)
 {
-        u32 size = mask & maxbase;      /* Find the significant bits */
+        u64 size = mask & maxbase;      /* Find the significant bits */
         if (!size)
                 return 0;
 
@@ -184,135 +181,142 @@ static u32 pci_size(u32 base, u32 maxbase, u32 mask)
         return size;
 }
 
-static u64 pci_size64(u64 base, u64 maxbase, u64 mask)
-{
-        u64 size = mask & maxbase;      /* Find the significant bits */
-        if (!size)
-                return 0;
+enum pci_bar_type {
+        pci_bar_unknown,        /* Standard PCI BAR probe */
+        pci_bar_io,             /* An io port BAR */
+        pci_bar_mem32,          /* A 32-bit memory BAR */
+        pci_bar_mem64,          /* A 64-bit memory BAR */
+};
 
-        /* Get the lowest of them to find the decode size, and
-           from that the extent.  */
-        size = (size & ~(size-1)) - 1;
+static inline enum pci_bar_type decode_bar(struct resource *res, u32 bar)
+{
+        if ((bar & PCI_BASE_ADDRESS_SPACE) == PCI_BASE_ADDRESS_SPACE_IO) {
+                res->flags = bar & ~PCI_BASE_ADDRESS_IO_MASK;
+                return pci_bar_io;
+        }
 
-        /* base == maxbase can be valid only if the BAR has
-           already been programmed with all 1s.  */
-        if (base == maxbase && ((base | size) & mask) != mask)
-                return 0;
+        res->flags = bar & ~PCI_BASE_ADDRESS_MEM_MASK;
 
-        return size;
+        if (res->flags == PCI_BASE_ADDRESS_MEM_TYPE_64)
+                return pci_bar_mem64;
+        return pci_bar_mem32;
 }
 
-static inline int is_64bit_memory(u32 mask)
+/*
+ * If the type is not unknown, we assume that the lowest bit is 'enable'.
+ * Returns 1 if the BAR was 64-bit and 0 if it was 32-bit.
+ */
+static int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
+                        struct resource *res, unsigned int pos)
 {
-        if ((mask & (PCI_BASE_ADDRESS_SPACE|PCI_BASE_ADDRESS_MEM_TYPE_MASK)) ==
-            (PCI_BASE_ADDRESS_SPACE_MEMORY|PCI_BASE_ADDRESS_MEM_TYPE_64))
-                return 1;
-        return 0;
-}
+        u32 l, sz, mask;
 
-static void pci_read_bases(struct pci_dev *dev, unsigned int howmany, int rom)
-{
-        unsigned int pos, reg, next;
-        u32 l, sz;
-        struct resource *res;
+        mask = type ? ~PCI_ROM_ADDRESS_ENABLE : ~0;
 
-        for(pos=0; pos<howmany; pos = next) {
-                u64 l64;
-                u64 sz64;
-                u32 raw_sz;
+        res->name = pci_name(dev);
 
-                next = pos+1;
-                res = &dev->resource[pos];
-                res->name = pci_name(dev);
-                reg = PCI_BASE_ADDRESS_0 + (pos << 2);
-                pci_read_config_dword(dev, reg, &l);
-                pci_write_config_dword(dev, reg, ~0);
-                pci_read_config_dword(dev, reg, &sz);
-                pci_write_config_dword(dev, reg, l);
-                if (!sz || sz == 0xffffffff)
-                        continue;
-                if (l == 0xffffffff)
-                        l = 0;
-                raw_sz = sz;
-                if ((l & PCI_BASE_ADDRESS_SPACE) ==
-                                PCI_BASE_ADDRESS_SPACE_MEMORY) {
-                        sz = pci_size(l, sz, (u32)PCI_BASE_ADDRESS_MEM_MASK);
-                        /*
-                         * For 64bit prefetchable memory sz could be 0, if the
-                         * real size is bigger than 4G, so we need to check
-                         * szhi for that.
-                         */
-                        if (!is_64bit_memory(l) && !sz)
-                                continue;
-                        res->start = l & PCI_BASE_ADDRESS_MEM_MASK;
-                        res->flags |= l & ~PCI_BASE_ADDRESS_MEM_MASK;
+        pci_read_config_dword(dev, pos, &l);
+        pci_write_config_dword(dev, pos, mask);
+        pci_read_config_dword(dev, pos, &sz);
+        pci_write_config_dword(dev, pos, l);
+
+        /*
+         * All bits set in sz means the device isn't working properly.
+         * If the BAR isn't implemented, all bits must be 0.  If it's a
+         * memory BAR or a ROM, bit 0 must be clear; if it's an io BAR, bit
+         * 1 must be clear.
+         */
+        if (!sz || sz == 0xffffffff)
+                goto fail;
+
+        /*
+         * I don't know how l can have all bits set.  Copied from old code.
+         * Maybe it fixes a bug on some ancient platform.
+         */
+        if (l == 0xffffffff)
+                l = 0;
+
+        if (type == pci_bar_unknown) {
+                type = decode_bar(res, l);
+                res->flags |= pci_calc_resource_flags(l) | IORESOURCE_SIZEALIGN;
+                if (type == pci_bar_io) {
+                        l &= PCI_BASE_ADDRESS_IO_MASK;
+                        mask = PCI_BASE_ADDRESS_IO_MASK & 0xffff;
                 } else {
-                        sz = pci_size(l, sz, PCI_BASE_ADDRESS_IO_MASK & 0xffff);
-                        if (!sz)
-                                continue;
-                        res->start = l & PCI_BASE_ADDRESS_IO_MASK;
-                        res->flags |= l & ~PCI_BASE_ADDRESS_IO_MASK;
+                        l &= PCI_BASE_ADDRESS_MEM_MASK;
+                        mask = (u32)PCI_BASE_ADDRESS_MEM_MASK;
                 }
-                res->end = res->start + (unsigned long) sz;
-                res->flags |= pci_calc_resource_flags(l) | IORESOURCE_SIZEALIGN;
-                if (is_64bit_memory(l)) {
-                        u32 szhi, lhi;
-
-                        pci_read_config_dword(dev, reg+4, &lhi);
-                        pci_write_config_dword(dev, reg+4, ~0);
-                        pci_read_config_dword(dev, reg+4, &szhi);
-                        pci_write_config_dword(dev, reg+4, lhi);
-                        sz64 = ((u64)szhi << 32) | raw_sz;
-                        l64 = ((u64)lhi << 32) | l;
-                        sz64 = pci_size64(l64, sz64, PCI_BASE_ADDRESS_MEM_MASK);
-                        next++;
-#if BITS_PER_LONG == 64
-                        if (!sz64) {
-                                res->start = 0;
-                                res->end = 0;
-                                res->flags = 0;
-                                continue;
-                        }
-                        res->start = l64 & PCI_BASE_ADDRESS_MEM_MASK;
-                        res->end = res->start + sz64;
-#else
-                        if (sz64 > 0x100000000ULL) {
-                                dev_err(&dev->dev, "BAR %d: can't handle 64-bit"
-                                        " BAR\n", pos);
-                                res->start = 0;
-                                res->flags = 0;
-                        } else if (lhi) {
-                                /* 64-bit wide address, treat as disabled */
-                                pci_write_config_dword(dev, reg,
-                                        l & ~(u32)PCI_BASE_ADDRESS_MEM_MASK);
-                                pci_write_config_dword(dev, reg+4, 0);
-                                res->start = 0;
-                                res->end = sz;
-                        }
-#endif
+        } else {
+                res->flags |= (l & IORESOURCE_ROM_ENABLE);
+                l &= PCI_ROM_ADDRESS_MASK;
+                mask = (u32)PCI_ROM_ADDRESS_MASK;
+        }
+
+        if (type == pci_bar_mem64) {
+                u64 l64 = l;
+                u64 sz64 = sz;
+                u64 mask64 = mask | (u64)~0 << 32;
+
+                pci_read_config_dword(dev, pos + 4, &l);
+                pci_write_config_dword(dev, pos + 4, ~0);
+                pci_read_config_dword(dev, pos + 4, &sz);
+                pci_write_config_dword(dev, pos + 4, l);
+
+                l64 |= ((u64)l << 32);
+                sz64 |= ((u64)sz << 32);
+
+                sz64 = pci_size(l64, sz64, mask64);
+
+                if (!sz64)
+                        goto fail;
+
+                if ((sizeof(resource_size_t) < 8) && (sz64 > 0x100000000ULL)) {
+                        dev_err(&dev->dev, "can't handle 64-bit BAR\n");
+                        goto fail;
+                } else if ((sizeof(resource_size_t) < 8) && l) {
+                        /* Address above 32-bit boundary; disable the BAR */
+                        pci_write_config_dword(dev, pos, 0);
+                        pci_write_config_dword(dev, pos + 4, 0);
+                        res->start = 0;
+                        res->end = sz64;
+                } else {
+                        res->start = l64;
+                        res->end = l64 + sz64;
                 }
+        } else {
+                sz = pci_size(l, sz, mask);
+
+                if (!sz)
+                        goto fail;
+
+                res->start = l;
+                res->end = l + sz;
         }
+
+ out:
+        return (type == pci_bar_mem64) ? 1 : 0;
+ fail:
+        res->flags = 0;
+        goto out;
+}
+
+static void pci_read_bases(struct pci_dev *dev, unsigned int howmany, int rom)
+{
+        unsigned int pos, reg;
+
+        for (pos = 0; pos < howmany; pos++) {
+                struct resource *res = &dev->resource[pos];
+                reg = PCI_BASE_ADDRESS_0 + (pos << 2);
+                pos += __pci_read_base(dev, pci_bar_unknown, res, reg);
+        }
+
         if (rom) {
+                struct resource *res = &dev->resource[PCI_ROM_RESOURCE];
                 dev->rom_base_reg = rom;
-                res = &dev->resource[PCI_ROM_RESOURCE];
-                res->name = pci_name(dev);
-                pci_read_config_dword(dev, rom, &l);
-                pci_write_config_dword(dev, rom, ~PCI_ROM_ADDRESS_ENABLE);
-                pci_read_config_dword(dev, rom, &sz);
-                pci_write_config_dword(dev, rom, l);
-                if (l == 0xffffffff)
-                        l = 0;
-                if (sz && sz != 0xffffffff) {
-                        sz = pci_size(l, sz, (u32)PCI_ROM_ADDRESS_MASK);
-                        if (sz) {
-                                res->flags = (l & IORESOURCE_ROM_ENABLE) |
-                                  IORESOURCE_MEM | IORESOURCE_PREFETCH |
-                                  IORESOURCE_READONLY | IORESOURCE_CACHEABLE |
-                                  IORESOURCE_SIZEALIGN;
-                                res->start = l & PCI_ROM_ADDRESS_MASK;
-                                res->end = res->start + (unsigned long) sz;
-                        }
-                }
+                res->flags = IORESOURCE_MEM | IORESOURCE_PREFETCH |
+                                IORESOURCE_READONLY | IORESOURCE_CACHEABLE |
+                                IORESOURCE_SIZEALIGN;
+                __pci_read_base(dev, pci_bar_mem32, res, rom);
         }
 }
 
@@ -1053,7 +1057,8 @@ int pci_scan_slot(struct pci_bus *bus, int devfn)
                 }
         }
 
-        if (bus->self)
+        /* only one slot has pcie device */
+        if (bus->self && nr)
                 pcie_aspm_init_link_state(bus->self);
 
         return nr;
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 12d489395fad..0fb365074288 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -923,6 +923,19 @@ static void __init quirk_ide_samemode(struct pci_dev *pdev)
 }
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_10, quirk_ide_samemode);
 
+/*
+ * Some ATA devices break if put into D3
+ */
+
+static void __devinit quirk_no_ata_d3(struct pci_dev *pdev)
+{
+        /* Quirk the legacy ATA devices only. The AHCI ones are ok */
+        if ((pdev->class >> 8) == PCI_CLASS_STORAGE_IDE)
+                pdev->dev_flags |= PCI_DEV_FLAGS_NO_D3;
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_ANY_ID, quirk_no_ata_d3);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATI, PCI_ANY_ID, quirk_no_ata_d3);
+
 /* This was originally an Alpha specific thing, but it really fits here.
  * The i82375 PCI/EISA bridge appears as non-classified. Fix that.
  */
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index 4d17d384578d..9ce55850271a 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -49,6 +49,13 @@ config BATTERY_OLPC
         help
           Say Y to enable support for the battery on the OLPC laptop.
 
+config BATTERY_TOSA
+        tristate "Sharp SL-6000 (tosa) battery"
+        depends on MACH_TOSA && MFD_TC6393XB
+        help
+          Say Y to enable support for the battery on the Sharp Zaurus
+          SL-6000 (tosa) models.
+
 config BATTERY_PALMTX
         tristate "Palm T|X battery"
         depends on MACH_PALMTX
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index 6f43a54ee420..4706bf8ff459 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -20,4 +20,5 @@ obj-$(CONFIG_APM_POWER)		+= apm_power.o
 obj-$(CONFIG_BATTERY_DS2760)    += ds2760_battery.o
 obj-$(CONFIG_BATTERY_PMU)       += pmu_battery.o
 obj-$(CONFIG_BATTERY_OLPC)      += olpc_battery.o
+obj-$(CONFIG_BATTERY_TOSA)      += tosa_battery.o
 obj-$(CONFIG_BATTERY_PALMTX)    += palmtx_battery.o
diff --git a/drivers/power/olpc_battery.c b/drivers/power/olpc_battery.c
index ab1e8289f07f..32570af3c5c9 100644
--- a/drivers/power/olpc_battery.c
+++ b/drivers/power/olpc_battery.c
@@ -19,7 +19,7 @@
 
 #define EC_BAT_VOLTAGE  0x10    /* uint16_t,    *9.76/32,    mV   */
 #define EC_BAT_CURRENT  0x11    /* int16_t,     *15.625/120, mA   */
-#define EC_BAT_ACR      0x12
+#define EC_BAT_ACR      0x12    /* int16_t,     *6250/15,    µAh  */
 #define EC_BAT_TEMP     0x13    /* uint16_t,    *100/256,   °C  */
 #define EC_AMB_TEMP     0x14    /* uint16_t,    *100/256,   °C  */
 #define EC_BAT_STATUS   0x15    /* uint8_t,     bitmask */
@@ -84,6 +84,119 @@ static struct power_supply olpc_ac = {
         .get_property = olpc_ac_get_prop,
 };
 
+static char bat_serial[17]; /* Ick */
+
+static int olpc_bat_get_status(union power_supply_propval *val, uint8_t ec_byte)
+{
+        if (olpc_platform_info.ecver > 0x44) {
+                if (ec_byte & BAT_STAT_CHARGING)
+                        val->intval = POWER_SUPPLY_STATUS_CHARGING;
+                else if (ec_byte & BAT_STAT_DISCHARGING)
+                        val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+                else if (ec_byte & BAT_STAT_FULL)
+                        val->intval = POWER_SUPPLY_STATUS_FULL;
+                else /* er,... */
+                        val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+        } else {
+                /* Older EC didn't report charge/discharge bits */
+                if (!(ec_byte & BAT_STAT_AC)) /* No AC means discharging */
+                        val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+                else if (ec_byte & BAT_STAT_FULL)
+                        val->intval = POWER_SUPPLY_STATUS_FULL;
+                else /* Not _necessarily_ true but EC doesn't tell all yet */
+                        val->intval = POWER_SUPPLY_STATUS_CHARGING;
+        }
+
+        return 0;
+}
+
+static int olpc_bat_get_health(union power_supply_propval *val)
+{
+        uint8_t ec_byte;
+        int ret;
+
+        ret = olpc_ec_cmd(EC_BAT_ERRCODE, NULL, 0, &ec_byte, 1);
+        if (ret)
+                return ret;
+
+        switch (ec_byte) {
+        case 0:
+                val->intval = POWER_SUPPLY_HEALTH_GOOD;
+                break;
+
+        case BAT_ERR_OVERTEMP:
+                val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
+                break;
+
+        case BAT_ERR_OVERVOLTAGE:
+                val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+                break;
+
+        case BAT_ERR_INFOFAIL:
+        case BAT_ERR_OUT_OF_CONTROL:
+        case BAT_ERR_ID_FAIL:
+        case BAT_ERR_ACR_FAIL:
+                val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+                break;
+
+        default:
+                /* Eep. We don't know this failure code */
+                ret = -EIO;
+        }
+
+        return ret;
+}
+
+static int olpc_bat_get_mfr(union power_supply_propval *val)
+{
+        uint8_t ec_byte;
+        int ret;
+
+        ec_byte = BAT_ADDR_MFR_TYPE;
+        ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &ec_byte, 1);
+        if (ret)
+                return ret;
+
+        switch (ec_byte >> 4) {
+        case 1:
+                val->strval = "Gold Peak";
+                break;
+        case 2:
+                val->strval = "BYD";
+                break;
+        default:
+                val->strval = "Unknown";
+                break;
+        }
+
+        return ret;
+}
+
+static int olpc_bat_get_tech(union power_supply_propval *val)
+{
+        uint8_t ec_byte;
+        int ret;
+
+        ec_byte = BAT_ADDR_MFR_TYPE;
+        ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &ec_byte, 1);
+        if (ret)
+                return ret;
+
+        switch (ec_byte & 0xf) {
+        case 1:
+                val->intval = POWER_SUPPLY_TECHNOLOGY_NiMH;
+                break;
+        case 2:
+                val->intval = POWER_SUPPLY_TECHNOLOGY_LiFe;
+                break;
+        default:
+                val->intval = POWER_SUPPLY_TECHNOLOGY_UNKNOWN;
+                break;
+        }
+
+        return ret;
+}
+
 /*********************************************************************
  *              Battery properties
  *********************************************************************/
@@ -94,6 +207,7 @@ static int olpc_bat_get_property(struct power_supply *psy,
         int ret = 0;
         int16_t ec_word;
         uint8_t ec_byte;
+        uint64_t ser_buf;
 
         ret = olpc_ec_cmd(EC_BAT_STATUS, NULL, 0, &ec_byte, 1);
         if (ret)
@@ -110,25 +224,10 @@ static int olpc_bat_get_property(struct power_supply *psy,
 
         switch (psp) {
         case POWER_SUPPLY_PROP_STATUS:
-                if (olpc_platform_info.ecver > 0x44) {
-                        if (ec_byte & BAT_STAT_CHARGING)
-                                val->intval = POWER_SUPPLY_STATUS_CHARGING;
-                        else if (ec_byte & BAT_STAT_DISCHARGING)
-                                val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
-                        else if (ec_byte & BAT_STAT_FULL)
-                                val->intval = POWER_SUPPLY_STATUS_FULL;
-                        else /* er,... */
-                                val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
-                } else {
-                        /* Older EC didn't report charge/discharge bits */
-                        if (!(ec_byte & BAT_STAT_AC)) /* No AC means discharging */
-                                val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
-                        else if (ec_byte & BAT_STAT_FULL)
-                                val->intval = POWER_SUPPLY_STATUS_FULL;
-                        else /* Not _necessarily_ true but EC doesn't tell all yet */
-                                val->intval = POWER_SUPPLY_STATUS_CHARGING;
-                        break;
-                }
+                ret = olpc_bat_get_status(val, ec_byte);
+                if (ret)
+                        return ret;
+                break;
         case POWER_SUPPLY_PROP_PRESENT:
                 val->intval = !!(ec_byte & BAT_STAT_PRESENT);
                 break;
@@ -137,72 +236,21 @@ static int olpc_bat_get_property(struct power_supply *psy,
                 if (ec_byte & BAT_STAT_DESTROY)
                         val->intval = POWER_SUPPLY_HEALTH_DEAD;
                 else {
-                        ret = olpc_ec_cmd(EC_BAT_ERRCODE, NULL, 0, &ec_byte, 1);
+                        ret = olpc_bat_get_health(val);
                         if (ret)
                                 return ret;
-
-                        switch (ec_byte) {
-                        case 0:
-                                val->intval = POWER_SUPPLY_HEALTH_GOOD;
-                                break;
-
-                        case BAT_ERR_OVERTEMP:
-                                val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
-                                break;
-
-                        case BAT_ERR_OVERVOLTAGE:
-                                val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
-                                break;
-
-                        case BAT_ERR_INFOFAIL:
-                        case BAT_ERR_OUT_OF_CONTROL:
-                        case BAT_ERR_ID_FAIL:
-                        case BAT_ERR_ACR_FAIL:
-                                val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
-                                break;
-
-                        default:
-                                /* Eep. We don't know this failure code */
-                                return -EIO;
-                        }
                 }
                 break;
 
         case POWER_SUPPLY_PROP_MANUFACTURER:
-                ec_byte = BAT_ADDR_MFR_TYPE;
-                ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &ec_byte, 1);
+                ret = olpc_bat_get_mfr(val);
                 if (ret)
                         return ret;
-
-                switch (ec_byte >> 4) {
-                case 1:
-                        val->strval = "Gold Peak";
-                        break;
-                case 2:
-                        val->strval = "BYD";
-                        break;
-                default:
-                        val->strval = "Unknown";
-                        break;
-                }
                 break;
         case POWER_SUPPLY_PROP_TECHNOLOGY:
-                ec_byte = BAT_ADDR_MFR_TYPE;
-                ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &ec_byte, 1);
+                ret = olpc_bat_get_tech(val);
                 if (ret)
                         return ret;
-
-                switch (ec_byte & 0xf) {
-                case 1:
-                        val->intval = POWER_SUPPLY_TECHNOLOGY_NiMH;
-                        break;
-                case 2:
-                        val->intval = POWER_SUPPLY_TECHNOLOGY_LiFe;
-                        break;
-                default:
-                        val->intval = POWER_SUPPLY_TECHNOLOGY_UNKNOWN;
-                        break;
-                }
                 break;
         case POWER_SUPPLY_PROP_VOLTAGE_AVG:
                 ret = olpc_ec_cmd(EC_BAT_VOLTAGE, NULL, 0, (void *)&ec_word, 2);
@@ -241,6 +289,22 @@ static int olpc_bat_get_property(struct power_supply *psy,
                 ec_word = be16_to_cpu(ec_word);
                 val->intval = ec_word * 100 / 256;
                 break;
+        case POWER_SUPPLY_PROP_CHARGE_COUNTER:
+                ret = olpc_ec_cmd(EC_BAT_ACR, NULL, 0, (void *)&ec_word, 2);
+                if (ret)
+                        return ret;
+
+                ec_word = be16_to_cpu(ec_word);
+                val->intval = ec_word * 6250 / 15;
+                break;
+        case POWER_SUPPLY_PROP_SERIAL_NUMBER:
+                ret = olpc_ec_cmd(EC_BAT_SERIAL, NULL, 0, (void *)&ser_buf, 8);
+                if (ret)
+                        return ret;
+
+                sprintf(bat_serial, "%016llx", (long long)be64_to_cpu(ser_buf));
+                val->strval = bat_serial;
+                break;
         default:
                 ret = -EINVAL;
                 break;
@@ -260,6 +324,50 @@ static enum power_supply_property olpc_bat_props[] = {
         POWER_SUPPLY_PROP_TEMP,
         POWER_SUPPLY_PROP_TEMP_AMBIENT,
         POWER_SUPPLY_PROP_MANUFACTURER,
+        POWER_SUPPLY_PROP_SERIAL_NUMBER,
+        POWER_SUPPLY_PROP_CHARGE_COUNTER,
+};
+
+/* EEPROM reading goes completely around the power_supply API, sadly */
+
+#define EEPROM_START    0x20
+#define EEPROM_END      0x80
+#define EEPROM_SIZE     (EEPROM_END - EEPROM_START)
+
+static ssize_t olpc_bat_eeprom_read(struct kobject *kobj,
+                struct bin_attribute *attr, char *buf, loff_t off, size_t count)
+{
+        uint8_t ec_byte;
+        int ret, end;
+
+        if (off >= EEPROM_SIZE)
+                return 0;
+        if (off + count > EEPROM_SIZE)
+                count = EEPROM_SIZE - off;
+
+        end = EEPROM_START + off + count;
+        for (ec_byte = EEPROM_START + off; ec_byte < end; ec_byte++) {
+                ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1,
+                                &buf[ec_byte - EEPROM_START], 1);
+                if (ret) {
+                        printk(KERN_ERR "olpc-battery:  EC command "
+                                        "EC_BAT_EEPROM @ 0x%x failed -"
+                                        " %d!\n", ec_byte, ret);
+                        return -EIO;
+                }
+        }
+
+        return count;
+}
+
+static struct bin_attribute olpc_bat_eeprom = {
+        .attr = {
+                .name = "eeprom",
+                .mode = S_IRUGO,
+                .owner = THIS_MODULE,
+        },
+        .size = 0,
+        .read = olpc_bat_eeprom_read,
 };
 
 /*********************************************************************
@@ -290,8 +398,14 @@ static int __init olpc_bat_init(void)
 
         if (!olpc_platform_info.ecver)
                 return -ENXIO;
-        if (olpc_platform_info.ecver < 0x43) {
-                printk(KERN_NOTICE "OLPC EC version 0x%02x too old for battery driver.\n", olpc_platform_info.ecver);
+
+        /*
+         * We've seen a number of EC protocol changes; this driver requires
+         * the latest EC protocol, supported by 0x44 and above.
+         */
+        if (olpc_platform_info.ecver < 0x44) {
+                printk(KERN_NOTICE "OLPC EC version 0x%02x too old for "
+                        "battery driver.\n", olpc_platform_info.ecver);
                 return -ENXIO;
         }
 
@@ -315,8 +429,14 @@ static int __init olpc_bat_init(void)
         if (ret)
                 goto battery_failed;
 
+        ret = device_create_bin_file(olpc_bat.dev, &olpc_bat_eeprom);
+        if (ret)
+                goto eeprom_failed;
+
         goto success;
 
+eeprom_failed:
+        power_supply_unregister(&olpc_bat);
 battery_failed:
         power_supply_unregister(&olpc_ac);
 ac_failed:
@@ -327,6 +447,7 @@ success:
 
 static void __exit olpc_bat_exit(void)
 {
+        device_remove_bin_file(olpc_bat.dev, &olpc_bat_eeprom);
         power_supply_unregister(&olpc_bat);
         power_supply_unregister(&olpc_ac);
         platform_device_unregister(bat_pdev);
diff --git a/drivers/power/power_supply_sysfs.c b/drivers/power/power_supply_sysfs.c
index 49215da5249b..fe2aeb11939b 100644
--- a/drivers/power/power_supply_sysfs.c
+++ b/drivers/power/power_supply_sysfs.c
@@ -99,6 +99,7 @@ static struct device_attribute power_supply_attrs[] = {
         POWER_SUPPLY_ATTR(charge_empty),
         POWER_SUPPLY_ATTR(charge_now),
         POWER_SUPPLY_ATTR(charge_avg),
+        POWER_SUPPLY_ATTR(charge_counter),
         POWER_SUPPLY_ATTR(energy_full_design),
         POWER_SUPPLY_ATTR(energy_empty_design),
         POWER_SUPPLY_ATTR(energy_full),
diff --git a/drivers/power/tosa_battery.c b/drivers/power/tosa_battery.c
new file mode 100644
index 000000000000..bf664fbd6610
--- /dev/null
+++ b/drivers/power/tosa_battery.c
@@ -0,0 +1,486 @@
+/*
+ * Battery and Power Management code for the Sharp SL-6000x
+ *
+ * Copyright (c) 2005 Dirk Opfer
+ * Copyright (c) 2008 Dmitry Baryshkov
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/power_supply.h>
+#include <linux/wm97xx.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/arch/tosa.h>
+
+static DEFINE_MUTEX(bat_lock); /* protects gpio pins */
+static struct work_struct bat_work;
+
+struct tosa_bat {
+        int status;
+        struct power_supply psy;
+        int full_chrg;
+
+        struct mutex work_lock; /* protects data */
+
+        bool (*is_present)(struct tosa_bat *bat);
+        int gpio_full;
+        int gpio_charge_off;
+
+        int technology;
+
+        int gpio_bat;
+        int adc_bat;
+        int adc_bat_divider;
+        int bat_max;
+        int bat_min;
+
+        int gpio_temp;
+        int adc_temp;
+        int adc_temp_divider;
+};
+
+static struct tosa_bat tosa_bat_main;
+static struct tosa_bat tosa_bat_jacket;
+
+static unsigned long tosa_read_bat(struct tosa_bat *bat)
+{
+        unsigned long value = 0;
+
+        if (bat->gpio_bat < 0 || bat->adc_bat < 0)
+                return 0;
+
+        mutex_lock(&bat_lock);
+        gpio_set_value(bat->gpio_bat, 1);
+        msleep(5);
+        value = wm97xx_read_aux_adc(bat->psy.dev->parent->driver_data,
+                        bat->adc_bat);
+        gpio_set_value(bat->gpio_bat, 0);
+        mutex_unlock(&bat_lock);
+
+        value = value * 1000000 / bat->adc_bat_divider;
+
+        return value;
+}
+
+static unsigned long tosa_read_temp(struct tosa_bat *bat)
+{
+        unsigned long value = 0;
+
+        if (bat->gpio_temp < 0 || bat->adc_temp < 0)
+                return 0;
+
+        mutex_lock(&bat_lock);
+        gpio_set_value(bat->gpio_temp, 1);
+        msleep(5);
+        value = wm97xx_read_aux_adc(bat->psy.dev->parent->driver_data,
+                        bat->adc_temp);
+        gpio_set_value(bat->gpio_temp, 0);
+        mutex_unlock(&bat_lock);
+
+        value = value * 10000 / bat->adc_temp_divider;
+
+        return value;
+}
+
+static int tosa_bat_get_property(struct power_supply *psy,
+                            enum power_supply_property psp,
+                            union power_supply_propval *val)
+{
+        int ret = 0;
+        struct tosa_bat *bat = container_of(psy, struct tosa_bat, psy);
+
+        if (bat->is_present && !bat->is_present(bat)
+                        && psp != POWER_SUPPLY_PROP_PRESENT) {
+                return -ENODEV;
+        }
+
+        switch (psp) {
+        case POWER_SUPPLY_PROP_STATUS:
+                val->intval = bat->status;
+                break;
+        case POWER_SUPPLY_PROP_TECHNOLOGY:
+                val->intval = bat->technology;
+                break;
+        case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+                val->intval = tosa_read_bat(bat);
+                break;
+        case POWER_SUPPLY_PROP_VOLTAGE_MAX:
+                if (bat->full_chrg == -1)
+                        val->intval = bat->bat_max;
+                else
+                        val->intval = bat->full_chrg;
+                break;
+        case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+                val->intval = bat->bat_max;
+                break;
+        case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
+                val->intval = bat->bat_min;
+                break;
+        case POWER_SUPPLY_PROP_TEMP:
+                val->intval = tosa_read_temp(bat);
+                break;
+        case POWER_SUPPLY_PROP_PRESENT:
+                val->intval = bat->is_present ? bat->is_present(bat) : 1;
+                break;
+        default:
+                ret = -EINVAL;
+                break;
+        }
+        return ret;
+}
+
+static bool tosa_jacket_bat_is_present(struct tosa_bat *bat)
+{
+        return gpio_get_value(TOSA_GPIO_JACKET_DETECT) == 0;
+}
+
+static void tosa_bat_external_power_changed(struct power_supply *psy)
+{
+        schedule_work(&bat_work);
+}
+
+static irqreturn_t tosa_bat_gpio_isr(int irq, void *data)
+{
+        pr_info("tosa_bat_gpio irq: %d\n", gpio_get_value(irq_to_gpio(irq)));
+        schedule_work(&bat_work);
+        return IRQ_HANDLED;
+}
+
+static void tosa_bat_update(struct tosa_bat *bat)
+{
+        int old;
+        struct power_supply *psy = &bat->psy;
+
+        mutex_lock(&bat->work_lock);
+
+        old = bat->status;
+
+        if (bat->is_present && !bat->is_present(bat)) {
+                printk(KERN_NOTICE "%s not present\n", psy->name);
+                bat->status = POWER_SUPPLY_STATUS_UNKNOWN;
+                bat->full_chrg = -1;
+        } else if (power_supply_am_i_supplied(psy)) {
+                if (bat->status == POWER_SUPPLY_STATUS_DISCHARGING) {
+                        gpio_set_value(bat->gpio_charge_off, 0);
+                        mdelay(15);
+                }
+
+                if (gpio_get_value(bat->gpio_full)) {
+                        if (old == POWER_SUPPLY_STATUS_CHARGING ||
+                                        bat->full_chrg == -1)
+                                bat->full_chrg = tosa_read_bat(bat);
+
+                        gpio_set_value(bat->gpio_charge_off, 1);
+                        bat->status = POWER_SUPPLY_STATUS_FULL;
+                } else {
+                        gpio_set_value(bat->gpio_charge_off, 0);
+                        bat->status = POWER_SUPPLY_STATUS_CHARGING;
+                }
+        } else {
+                gpio_set_value(bat->gpio_charge_off, 1);
+                bat->status = POWER_SUPPLY_STATUS_DISCHARGING;
+        }
+
+        if (old != bat->status)
+                power_supply_changed(psy);
+
+        mutex_unlock(&bat->work_lock);
+}
+
+static void tosa_bat_work(struct work_struct *work)
+{
+        tosa_bat_update(&tosa_bat_main);
+        tosa_bat_update(&tosa_bat_jacket);
+}
+
+
+static enum power_supply_property tosa_bat_main_props[] = {
+        POWER_SUPPLY_PROP_STATUS,
+        POWER_SUPPLY_PROP_TECHNOLOGY,
+        POWER_SUPPLY_PROP_VOLTAGE_NOW,
+        POWER_SUPPLY_PROP_VOLTAGE_MAX,
+        POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+        POWER_SUPPLY_PROP_TEMP,
+        POWER_SUPPLY_PROP_PRESENT,
+};
+
+static enum power_supply_property tosa_bat_bu_props[] = {
+        POWER_SUPPLY_PROP_STATUS,
+        POWER_SUPPLY_PROP_TECHNOLOGY,
+        POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+        POWER_SUPPLY_PROP_VOLTAGE_NOW,
+        POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
+        POWER_SUPPLY_PROP_PRESENT,
+};
+
+static struct tosa_bat tosa_bat_main = {
+        .status = POWER_SUPPLY_STATUS_DISCHARGING,
+        .full_chrg = -1,
+        .psy = {
+                .name           = "main-battery",
+                .type           = POWER_SUPPLY_TYPE_BATTERY,
+                .properties     = tosa_bat_main_props,
+                .num_properties = ARRAY_SIZE(tosa_bat_main_props),
+                .get_property   = tosa_bat_get_property,
+                .external_power_changed = tosa_bat_external_power_changed,
+                .use_for_apm    = 1,
+        },
+
+        .gpio_full = TOSA_GPIO_BAT0_CRG,
+        .gpio_charge_off = TOSA_GPIO_CHARGE_OFF,
+
+        .technology = POWER_SUPPLY_TECHNOLOGY_LIPO,
+
+        .gpio_bat = TOSA_GPIO_BAT0_V_ON,
+        .adc_bat = WM97XX_AUX_ID3,
+        .adc_bat_divider = 414,
+        .bat_max = 4310000,
+        .bat_min = 1551 * 1000000 / 414,
+
+        .gpio_temp = TOSA_GPIO_BAT1_TH_ON,
+        .adc_temp = WM97XX_AUX_ID2,
+        .adc_temp_divider = 10000,
+};
+
+static struct tosa_bat tosa_bat_jacket = {
+        .status = POWER_SUPPLY_STATUS_DISCHARGING,
+        .full_chrg = -1,
+        .psy = {
+                .name           = "jacket-battery",
+                .type           = POWER_SUPPLY_TYPE_BATTERY,
+                .properties     = tosa_bat_main_props,
+                .num_properties = ARRAY_SIZE(tosa_bat_main_props),
+                .get_property   = tosa_bat_get_property,
+                .external_power_changed = tosa_bat_external_power_changed,
+        },
+
+        .is_present = tosa_jacket_bat_is_present,
+        .gpio_full = TOSA_GPIO_BAT1_CRG,
+        .gpio_charge_off = TOSA_GPIO_CHARGE_OFF_JC,
+
+        .technology = POWER_SUPPLY_TECHNOLOGY_LIPO,
+
+        .gpio_bat = TOSA_GPIO_BAT1_V_ON,
+        .adc_bat = WM97XX_AUX_ID3,
+        .adc_bat_divider = 414,
+        .bat_max = 4310000,
+        .bat_min = 1551 * 1000000 / 414,
+
+        .gpio_temp = TOSA_GPIO_BAT0_TH_ON,
+        .adc_temp = WM97XX_AUX_ID2,
+        .adc_temp_divider = 10000,
+};
+
+static struct tosa_bat tosa_bat_bu = {
+        .status = POWER_SUPPLY_STATUS_UNKNOWN,
+        .full_chrg = -1,
+
+        .psy = {
+                .name           = "backup-battery",
+                .type           = POWER_SUPPLY_TYPE_BATTERY,
+                .properties     = tosa_bat_bu_props,
+                .num_properties = ARRAY_SIZE(tosa_bat_bu_props),
+                .get_property   = tosa_bat_get_property,
+                .external_power_changed = tosa_bat_external_power_changed,
+        },
+
+        .gpio_full = -1,
+        .gpio_charge_off = -1,
+
+        .technology = POWER_SUPPLY_TECHNOLOGY_LiMn,
+
+        .gpio_bat = TOSA_GPIO_BU_CHRG_ON,
+        .adc_bat = WM97XX_AUX_ID4,
+        .adc_bat_divider = 1266,
+
+        .gpio_temp = -1,
+        .adc_temp = -1,
+        .adc_temp_divider = -1,
+};
+
+static struct {
+        int gpio;
+        char *name;
+        bool output;
+        int value;
+} gpios[] = {
+        { TOSA_GPIO_CHARGE_OFF,         "main charge off",      1, 1 },
+        { TOSA_GPIO_CHARGE_OFF_JC,      "jacket charge off",    1, 1 },
+        { TOSA_GPIO_BAT_SW_ON,          "battery switch",       1, 0 },
+        { TOSA_GPIO_BAT0_V_ON,          "main battery",         1, 0 },
+        { TOSA_GPIO_BAT1_V_ON,          "jacket battery",       1, 0 },
+        { TOSA_GPIO_BAT1_TH_ON,         "main battery temp",    1, 0 },
+        { TOSA_GPIO_BAT0_TH_ON,         "jacket battery temp",  1, 0 },
+        { TOSA_GPIO_BU_CHRG_ON,         "backup battery",       1, 0 },
+        { TOSA_GPIO_BAT0_CRG,           "main battery full",    0, 0 },
+        { TOSA_GPIO_BAT1_CRG,           "jacket battery full",  0, 0 },
+        { TOSA_GPIO_BAT0_LOW,           "main battery low",     0, 0 },
+        { TOSA_GPIO_BAT1_LOW,           "jacket battery low",   0, 0 },
+        { TOSA_GPIO_JACKET_DETECT,      "jacket detect",        0, 0 },
+};
+
+#ifdef CONFIG_PM
+static int tosa_bat_suspend(struct platform_device *dev, pm_message_t state)
+{
+        /* flush all pending status updates */
+        flush_scheduled_work();
+        return 0;
+}
+
+static int tosa_bat_resume(struct platform_device *dev)
+{
+        /* things may have changed while we were away */
+        schedule_work(&bat_work);
+        return 0;
+}
+#else
+#define tosa_bat_suspend NULL
+#define tosa_bat_resume NULL
+#endif
+
+static int __devinit tosa_bat_probe(struct platform_device *dev)
+{
+        int ret;
+        int i;
+
+        if (!machine_is_tosa())
+                return -ENODEV;
+
+        for (i = 0; i < ARRAY_SIZE(gpios); i++) {
+                ret = gpio_request(gpios[i].gpio, gpios[i].name);
+                if (ret) {
+                        i--;
+                        goto err_gpio;
+                }
+
+                if (gpios[i].output)
+                        ret = gpio_direction_output(gpios[i].gpio,
+                                        gpios[i].value);
+                else
+                        ret = gpio_direction_input(gpios[i].gpio);
+
+                if (ret)
+                        goto err_gpio;
+        }
+
+        mutex_init(&tosa_bat_main.work_lock);
+        mutex_init(&tosa_bat_jacket.work_lock);
+
+        INIT_WORK(&bat_work, tosa_bat_work);
+
+        ret = power_supply_register(&dev->dev, &tosa_bat_main.psy);
+        if (ret)
+                goto err_psy_reg_main;
+        ret = power_supply_register(&dev->dev, &tosa_bat_jacket.psy);
+        if (ret)
+                goto err_psy_reg_jacket;
+        ret = power_supply_register(&dev->dev, &tosa_bat_bu.psy);
+        if (ret)
+                goto err_psy_reg_bu;
+
+        ret = request_irq(gpio_to_irq(TOSA_GPIO_BAT0_CRG),
+                                tosa_bat_gpio_isr,
+                                IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+                                "main full", &tosa_bat_main);
+        if (ret)
+                goto err_req_main;
+
+        ret = request_irq(gpio_to_irq(TOSA_GPIO_BAT1_CRG),
+                                tosa_bat_gpio_isr,
+                                IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+                                "jacket full", &tosa_bat_jacket);
+        if (ret)
+                goto err_req_jacket;
+
+        ret = request_irq(gpio_to_irq(TOSA_GPIO_JACKET_DETECT),
+                                tosa_bat_gpio_isr,
+                                IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+                                "jacket detect", &tosa_bat_jacket);
+        if (!ret) {
+                schedule_work(&bat_work);
+                return 0;
+        }
+
+        free_irq(gpio_to_irq(TOSA_GPIO_BAT1_CRG), &tosa_bat_jacket);
+err_req_jacket:
+        free_irq(gpio_to_irq(TOSA_GPIO_BAT0_CRG), &tosa_bat_main);
+err_req_main:
+        power_supply_unregister(&tosa_bat_bu.psy);
+err_psy_reg_bu:
+        power_supply_unregister(&tosa_bat_jacket.psy);
+err_psy_reg_jacket:
+        power_supply_unregister(&tosa_bat_main.psy);
+err_psy_reg_main:
+
+        /* see comment in tosa_bat_remove */
+        flush_scheduled_work();
+
+        i--;
+err_gpio:
+        for (; i >= 0; i--)
+                gpio_free(gpios[i].gpio);
+
+        return ret;
+}
+
+static int __devexit tosa_bat_remove(struct platform_device *dev)
+{
+        int i;
+
+        free_irq(gpio_to_irq(TOSA_GPIO_JACKET_DETECT), &tosa_bat_jacket);
+        free_irq(gpio_to_irq(TOSA_GPIO_BAT1_CRG), &tosa_bat_jacket);
+        free_irq(gpio_to_irq(TOSA_GPIO_BAT0_CRG), &tosa_bat_main);
+
+        power_supply_unregister(&tosa_bat_bu.psy);
+        power_supply_unregister(&tosa_bat_jacket.psy);
+        power_supply_unregister(&tosa_bat_main.psy);
+
+        /*
+         * now flush all pending work.
+         * we won't get any more schedules, since all
+         * sources (isr and external_power_changed)
+         * are unregistered now.
+         */
+        flush_scheduled_work();
+
+        for (i = ARRAY_SIZE(gpios) - 1; i >= 0; i--)
+                gpio_free(gpios[i].gpio);
+
+        return 0;
+}
+
+static struct platform_driver tosa_bat_driver = {
+        .driver.name    = "wm97xx-battery",
+        .driver.owner   = THIS_MODULE,
+        .probe          = tosa_bat_probe,
+        .remove         = __devexit_p(tosa_bat_remove),
+        .suspend        = tosa_bat_suspend,
+        .resume         = tosa_bat_resume,
+};
+
+static int __init tosa_bat_init(void)
+{
+        return platform_driver_register(&tosa_bat_driver);
+}
+
+static void __exit tosa_bat_exit(void)
+{
+        platform_driver_unregister(&tosa_bat_driver);
+}
+
+module_init(tosa_bat_init);
+module_exit(tosa_bat_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Dmitry Baryshkov");
+MODULE_DESCRIPTION("Tosa battery driver");
+MODULE_ALIAS("platform:wm97xx-battery");
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
new file mode 100644
index 000000000000..a656128f1fdd
--- /dev/null
+++ b/drivers/regulator/Kconfig
@@ -0,0 +1,59 @@
+menu "Voltage and Current regulators"
+
+config REGULATOR
+        bool "Voltage and Current Regulator Support"
+        default n
+        help
+          Generic Voltage and Current Regulator support.
+
+          This framework is designed to provide a generic interface to voltage
+          and current regulators within the Linux kernel. It's intended to
+          provide voltage and current control to client or consumer drivers and
+          also provide status information to user space applications through a
+          sysfs interface.
+
+          The intention is to allow systems to dynamically control regulator
+          output in order to save power and prolong battery life. This applies
+          to both voltage regulators (where voltage output is controllable) and
+          current sinks (where current output is controllable).
+
+          This framework safely compiles out if not selected so that client
+          drivers can still be used in systems with no software controllable
+          regulators.
+
+          If unsure, say no.
+
+config REGULATOR_DEBUG
+        bool "Regulator debug support"
+        depends on REGULATOR
+        help
+          Say yes here to enable debugging support.
+
+config REGULATOR_FIXED_VOLTAGE
+        tristate
+        default n
+        select REGULATOR
+
+config REGULATOR_VIRTUAL_CONSUMER
+        tristate "Virtual regulator consumer support"
+        default n
+        select REGULATOR
+        help
+          This driver provides a virtual consumer for the voltage and
+          current regulator API which provides sysfs controls for
+          configuring the supplies requested.  This is mainly useful
+          for test purposes.
+
+          If unsure, say no.
+
+config REGULATOR_BQ24022
+        tristate "TI bq24022 Dual Input 1-Cell Li-Ion Charger IC"
+        default n
+        select REGULATOR
+        help
+          This driver controls a TI bq24022 Charger attached via
+          GPIOs. The provided current regulator can enable/disable
+          charging select between 100 mA and 500 mA charging current
+          limit.
+
+endmenu
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
new file mode 100644
index 000000000000..ac2c64efe65c
--- /dev/null
+++ b/drivers/regulator/Makefile
@@ -0,0 +1,12 @@
+#
+# Makefile for regulator drivers.
+#
+
+
+obj-$(CONFIG_REGULATOR) += core.o
+obj-$(CONFIG_REGULATOR_FIXED_VOLTAGE) += fixed.o
+obj-$(CONFIG_REGULATOR_VIRTUAL_CONSUMER) += virtual.o
+
+obj-$(CONFIG_REGULATOR_BQ24022) += bq24022.o
+
+ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG
diff --git a/drivers/regulator/bq24022.c b/drivers/regulator/bq24022.c
new file mode 100644
index 000000000000..263699d6152d
--- /dev/null
+++ b/drivers/regulator/bq24022.c
@@ -0,0 +1,167 @@
+/*
+ * Support for TI bq24022 (bqTINY-II) Dual Input (USB/AC Adpater)
+ * 1-Cell Li-Ion Charger connected via GPIOs.
+ *
+ * Copyright (c) 2008 Philipp Zabel
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/regulator/bq24022.h>
+#include <linux/regulator/driver.h>
+
+static int bq24022_set_current_limit(struct regulator_dev *rdev,
+                                        int min_uA, int max_uA)
+{
+        struct platform_device *pdev = rdev_get_drvdata(rdev);
+        struct bq24022_mach_info *pdata = pdev->dev.platform_data;
+
+        dev_dbg(&pdev->dev, "setting current limit to %s mA\n",
+                max_uA >= 500000 ? "500" : "100");
+
+        /* REVISIT: maybe return error if min_uA != 0 ? */
+        gpio_set_value(pdata->gpio_iset2, max_uA >= 500000);
+        return 0;
+}
+
+static int bq24022_get_current_limit(struct regulator_dev *rdev)
+{
+        struct platform_device *pdev = rdev_get_drvdata(rdev);
+        struct bq24022_mach_info *pdata = pdev->dev.platform_data;
+
+        return gpio_get_value(pdata->gpio_iset2) ? 500000 : 100000;
+}
+
+static int bq24022_enable(struct regulator_dev *rdev)
+{
+        struct platform_device *pdev = rdev_get_drvdata(rdev);
+        struct bq24022_mach_info *pdata = pdev->dev.platform_data;
+
+        dev_dbg(&pdev->dev, "enabling charger\n");
+
+        gpio_set_value(pdata->gpio_nce, 0);
+        return 0;
+}
+
+static int bq24022_disable(struct regulator_dev *rdev)
+{
+        struct platform_device *pdev = rdev_get_drvdata(rdev);
+        struct bq24022_mach_info *pdata = pdev->dev.platform_data;
+
+        dev_dbg(&pdev->dev, "disabling charger\n");
+
+        gpio_set_value(pdata->gpio_nce, 1);
+        return 0;
+}
+
+static int bq24022_is_enabled(struct regulator_dev *rdev)
+{
+        struct platform_device *pdev = rdev_get_drvdata(rdev);
+        struct bq24022_mach_info *pdata = pdev->dev.platform_data;
+
+        return !gpio_get_value(pdata->gpio_nce);
+}
+
+static struct regulator_ops bq24022_ops = {
+        .set_current_limit = bq24022_set_current_limit,
+        .get_current_limit = bq24022_get_current_limit,
+        .enable            = bq24022_enable,
+        .disable           = bq24022_disable,
+        .is_enabled        = bq24022_is_enabled,
+};
+
+static struct regulator_desc bq24022_desc = {
+        .name  = "bq24022",
+        .ops   = &bq24022_ops,
+        .type  = REGULATOR_CURRENT,
+};
+
+static int __init bq24022_probe(struct platform_device *pdev)
+{
+        struct bq24022_mach_info *pdata = pdev->dev.platform_data;
+        struct regulator_dev *bq24022;
+        int ret;
+
+        if (!pdata || !pdata->gpio_nce || !pdata->gpio_iset2)
+                return -EINVAL;
+
+        ret = gpio_request(pdata->gpio_nce, "ncharge_en");
+        if (ret) {
+                dev_dbg(&pdev->dev, "couldn't request nCE GPIO: %d\n",
+                        pdata->gpio_nce);
+                goto err_ce;
+        }
+        ret = gpio_request(pdata->gpio_iset2, "charge_mode");
+        if (ret) {
+                dev_dbg(&pdev->dev, "couldn't request ISET2 GPIO: %d\n",
+                        pdata->gpio_iset2);
+                goto err_iset2;
+        }
+        ret = gpio_direction_output(pdata->gpio_iset2, 0);
+        ret = gpio_direction_output(pdata->gpio_nce, 1);
+
+        bq24022 = regulator_register(&bq24022_desc, pdev);
+        if (IS_ERR(bq24022)) {
+                dev_dbg(&pdev->dev, "couldn't register regulator\n");
+                ret = PTR_ERR(bq24022);
+                goto err_reg;
+        }
+        platform_set_drvdata(pdev, bq24022);
+        dev_dbg(&pdev->dev, "registered regulator\n");
+
+        return 0;
+err_reg:
+        gpio_free(pdata->gpio_iset2);
+err_iset2:
+        gpio_free(pdata->gpio_nce);
+err_ce:
+        return ret;
+}
+
+static int __devexit bq24022_remove(struct platform_device *pdev)
+{
+        struct bq24022_mach_info *pdata = pdev->dev.platform_data;
+        struct regulator_dev *bq24022 = platform_get_drvdata(pdev);
+
+        regulator_unregister(bq24022);
+        gpio_free(pdata->gpio_iset2);
+        gpio_free(pdata->gpio_nce);
+
+        return 0;
+}
+
+static struct platform_driver bq24022_driver = {
+        .driver = {
+                .name = "bq24022",
+        },
+        .remove = __devexit_p(bq24022_remove),
+};
+
+static int __init bq24022_init(void)
+{
+        return platform_driver_probe(&bq24022_driver, bq24022_probe);
+}
+
+static void __exit bq24022_exit(void)
+{
+        platform_driver_unregister(&bq24022_driver);
+}
+
+/*
+ * make sure this is probed before gpio_vbus and pda_power,
+ * but after asic3 or other GPIO expander drivers.
+ */
+subsys_initcall(bq24022_init);
+module_exit(bq24022_exit);
+
+MODULE_AUTHOR("Philipp Zabel");
+MODULE_DESCRIPTION("TI bq24022 Li-Ion Charger driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
new file mode 100644
index 000000000000..9c7986261568
--- /dev/null
+++ b/drivers/regulator/core.c
@@ -0,0 +1,1903 @@
+/*
+ * core.c  --  Voltage/Current Regulator framework.
+ *
+ * Copyright 2007, 2008 Wolfson Microelectronics PLC.
+ *
+ * Author: Liam Girdwood <liam.girdwood@wolfsonmicro.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/suspend.h>
+#include <linux/regulator/consumer.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+
+#define REGULATOR_VERSION "0.5"
+
+static DEFINE_MUTEX(regulator_list_mutex);
+static LIST_HEAD(regulator_list);
+static LIST_HEAD(regulator_map_list);
+
+/**
+ * struct regulator_dev
+ *
+ * Voltage / Current regulator class device. One for each regulator.
+ */
+struct regulator_dev {
+        struct regulator_desc *desc;
+        int use_count;
+
+        /* lists we belong to */
+        struct list_head list; /* list of all regulators */
+        struct list_head slist; /* list of supplied regulators */
+
+        /* lists we own */
+        struct list_head consumer_list; /* consumers we supply */
+        struct list_head supply_list; /* regulators we supply */
+
+        struct blocking_notifier_head notifier;
+        struct mutex mutex; /* consumer lock */
+        struct module *owner;
+        struct device dev;
+        struct regulation_constraints *constraints;
+        struct regulator_dev *supply;   /* for tree */
+
+        void *reg_data;         /* regulator_dev data */
+};
+
+/**
+ * struct regulator_map
+ *
+ * Used to provide symbolic supply names to devices.
+ */
+struct regulator_map {
+        struct list_head list;
+        struct device *dev;
+        const char *supply;
+        const char *regulator;
+};
+
+static inline struct regulator_dev *to_rdev(struct device *d)
+{
+        return container_of(d, struct regulator_dev, dev);
+}
+
+/*
+ * struct regulator
+ *
+ * One for each consumer device.
+ */
+struct regulator {
+        struct device *dev;
+        struct list_head list;
+        int uA_load;
+        int min_uV;
+        int max_uV;
+        int enabled; /* client has called enabled */
+        char *supply_name;
+        struct device_attribute dev_attr;
+        struct regulator_dev *rdev;
+};
+
+static int _regulator_is_enabled(struct regulator_dev *rdev);
+static int _regulator_disable(struct regulator_dev *rdev);
+static int _regulator_get_voltage(struct regulator_dev *rdev);
+static int _regulator_get_current_limit(struct regulator_dev *rdev);
+static unsigned int _regulator_get_mode(struct regulator_dev *rdev);
+static void _notifier_call_chain(struct regulator_dev *rdev,
+                                  unsigned long event, void *data);
+
+/* gets the regulator for a given consumer device */
+static struct regulator *get_device_regulator(struct device *dev)
+{
+        struct regulator *regulator = NULL;
+        struct regulator_dev *rdev;
+
+        mutex_lock(&regulator_list_mutex);
+        list_for_each_entry(rdev, &regulator_list, list) {
+                mutex_lock(&rdev->mutex);
+                list_for_each_entry(regulator, &rdev->consumer_list, list) {
+                        if (regulator->dev == dev) {
+                                mutex_unlock(&rdev->mutex);
+                                mutex_unlock(&regulator_list_mutex);
+                                return regulator;
+                        }
+                }
+                mutex_unlock(&rdev->mutex);
+        }
+        mutex_unlock(&regulator_list_mutex);
+        return NULL;
+}
+
+/* Platform voltage constraint check */
+static int regulator_check_voltage(struct regulator_dev *rdev,
+                                   int *min_uV, int *max_uV)
+{
+        BUG_ON(*min_uV > *max_uV);
+
+        if (!rdev->constraints) {
+                printk(KERN_ERR "%s: no constraints for %s\n", __func__,
+                       rdev->desc->name);
+                return -ENODEV;
+        }
+        if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE)) {
+                printk(KERN_ERR "%s: operation not allowed for %s\n",
+                       __func__, rdev->desc->name);
+                return -EPERM;
+        }
+
+        if (*max_uV > rdev->constraints->max_uV)
+                *max_uV = rdev->constraints->max_uV;
+        if (*min_uV < rdev->constraints->min_uV)
+                *min_uV = rdev->constraints->min_uV;
+
+        if (*min_uV > *max_uV)
+                return -EINVAL;
+
+        return 0;
+}
+
+/* current constraint check */
+static int regulator_check_current_limit(struct regulator_dev *rdev,
+                                        int *min_uA, int *max_uA)
+{
+        BUG_ON(*min_uA > *max_uA);
+
+        if (!rdev->constraints) {
+                printk(KERN_ERR "%s: no constraints for %s\n", __func__,
+                       rdev->desc->name);
+                return -ENODEV;
+        }
+        if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_CURRENT)) {
+                printk(KERN_ERR "%s: operation not allowed for %s\n",
+                       __func__, rdev->desc->name);
+                return -EPERM;
+        }
+
+        if (*max_uA > rdev->constraints->max_uA)
+                *max_uA = rdev->constraints->max_uA;
+        if (*min_uA < rdev->constraints->min_uA)
+                *min_uA = rdev->constraints->min_uA;
+
+        if (*min_uA > *max_uA)
+                return -EINVAL;
+
+        return 0;
+}
+
+/* operating mode constraint check */
+static int regulator_check_mode(struct regulator_dev *rdev, int mode)
+{
+        if (!rdev->constraints) {
+                printk(KERN_ERR "%s: no constraints for %s\n", __func__,
+                       rdev->desc->name);
+                return -ENODEV;
+        }
+        if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_MODE)) {
+                printk(KERN_ERR "%s: operation not allowed for %s\n",
+                       __func__, rdev->desc->name);
+                return -EPERM;
+        }
+        if (!(rdev->constraints->valid_modes_mask & mode)) {
+                printk(KERN_ERR "%s: invalid mode %x for %s\n",
+                       __func__, mode, rdev->desc->name);
+                return -EINVAL;
+        }
+        return 0;
+}
+
+/* dynamic regulator mode switching constraint check */
+static int regulator_check_drms(struct regulator_dev *rdev)
+{
+        if (!rdev->constraints) {
+                printk(KERN_ERR "%s: no constraints for %s\n", __func__,
+                       rdev->desc->name);
+                return -ENODEV;
+        }
+        if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_DRMS)) {
+                printk(KERN_ERR "%s: operation not allowed for %s\n",
+                       __func__, rdev->desc->name);
+                return -EPERM;
+        }
+        return 0;
+}
+
+static ssize_t device_requested_uA_show(struct device *dev,
+                             struct device_attribute *attr, char *buf)
+{
+        struct regulator *regulator;
+
+        regulator = get_device_regulator(dev);
+        if (regulator == NULL)
+                return 0;
+
+        return sprintf(buf, "%d\n", regulator->uA_load);
+}
+
+static ssize_t regulator_uV_show(struct device *dev,
+                                struct device_attribute *attr, char *buf)
+{
+        struct regulator_dev *rdev = to_rdev(dev);
+        ssize_t ret;
+
+        mutex_lock(&rdev->mutex);
+        ret = sprintf(buf, "%d\n", _regulator_get_voltage(rdev));
+        mutex_unlock(&rdev->mutex);
+
+        return ret;
+}
+
+static ssize_t regulator_uA_show(struct device *dev,
+                                struct device_attribute *attr, char *buf)
+{
+        struct regulator_dev *rdev = to_rdev(dev);
+
+        return sprintf(buf, "%d\n", _regulator_get_current_limit(rdev));
+}
+
+static ssize_t regulator_opmode_show(struct device *dev,
+                                    struct device_attribute *attr, char *buf)
+{
+        struct regulator_dev *rdev = to_rdev(dev);
+        int mode = _regulator_get_mode(rdev);
+
+        switch (mode) {
+        case REGULATOR_MODE_FAST:
+                return sprintf(buf, "fast\n");
+        case REGULATOR_MODE_NORMAL:
+                return sprintf(buf, "normal\n");
+        case REGULATOR_MODE_IDLE:
+                return sprintf(buf, "idle\n");
+        case REGULATOR_MODE_STANDBY:
+                return sprintf(buf, "standby\n");
+        }
+        return sprintf(buf, "unknown\n");
+}
+
+static ssize_t regulator_state_show(struct device *dev,
+                                   struct device_attribute *attr, char *buf)
+{
+        struct regulator_dev *rdev = to_rdev(dev);
+        int state = _regulator_is_enabled(rdev);
+
+        if (state > 0)
+                return sprintf(buf, "enabled\n");
+        else if (state == 0)
+                return sprintf(buf, "disabled\n");
+        else
+                return sprintf(buf, "unknown\n");
+}
+
+static ssize_t regulator_min_uA_show(struct device *dev,
+                                    struct device_attribute *attr, char *buf)
+{
+        struct regulator_dev *rdev = to_rdev(dev);
+
+        if (!rdev->constraints)
+                return sprintf(buf, "constraint not defined\n");
+
+        return sprintf(buf, "%d\n", rdev->constraints->min_uA);
+}
+
+static ssize_t regulator_max_uA_show(struct device *dev,
+                                    struct device_attribute *attr, char *buf)
+{
+        struct regulator_dev *rdev = to_rdev(dev);
+
+        if (!rdev->constraints)
+                return sprintf(buf, "constraint not defined\n");
+
+        return sprintf(buf, "%d\n", rdev->constraints->max_uA);
+}
+
+static ssize_t regulator_min_uV_show(struct device *dev,
+                                    struct device_attribute *attr, char *buf)
+{
+        struct regulator_dev *rdev = to_rdev(dev);
+
+        if (!rdev->constraints)
+                return sprintf(buf, "constraint not defined\n");
+
+        return sprintf(buf, "%d\n", rdev->constraints->min_uV);
+}
+
+static ssize_t regulator_max_uV_show(struct device *dev,
+                                    struct device_attribute *attr, char *buf)
+{
+        struct regulator_dev *rdev = to_rdev(dev);
+
+        if (!rdev->constraints)
+                return sprintf(buf, "constraint not defined\n");
+
+        return sprintf(buf, "%d\n", rdev->constraints->max_uV);
+}
+
+static ssize_t regulator_total_uA_show(struct device *dev,
+                                      struct device_attribute *attr, char *buf)
+{
+        struct regulator_dev *rdev = to_rdev(dev);
+        struct regulator *regulator;
+        int uA = 0;
+
+        mutex_lock(&rdev->mutex);
+        list_for_each_entry(regulator, &rdev->consumer_list, list)
+            uA += regulator->uA_load;
+        mutex_unlock(&rdev->mutex);
+        return sprintf(buf, "%d\n", uA);
+}
+
+static ssize_t regulator_num_users_show(struct device *dev,
+                                      struct device_attribute *attr, char *buf)
+{
+        struct regulator_dev *rdev = to_rdev(dev);
+        return sprintf(buf, "%d\n", rdev->use_count);
+}
+
+static ssize_t regulator_type_show(struct device *dev,
+                                  struct device_attribute *attr, char *buf)
+{
+        struct regulator_dev *rdev = to_rdev(dev);
+
+        switch (rdev->desc->type) {
+        case REGULATOR_VOLTAGE:
+                return sprintf(buf, "voltage\n");
+        case REGULATOR_CURRENT:
+                return sprintf(buf, "current\n");
+        }
+        return sprintf(buf, "unknown\n");
+}
+
+static ssize_t regulator_suspend_mem_uV_show(struct device *dev,
+                                struct device_attribute *attr, char *buf)
+{
+        struct regulator_dev *rdev = to_rdev(dev);
+
+        if (!rdev->constraints)
+                return sprintf(buf, "not defined\n");
+        return sprintf(buf, "%d\n", rdev->constraints->state_mem.uV);
+}
+
+static ssize_t regulator_suspend_disk_uV_show(struct device *dev,
+                                struct device_attribute *attr, char *buf)
+{
+        struct regulator_dev *rdev = to_rdev(dev);
+
+        if (!rdev->constraints)
+                return sprintf(buf, "not defined\n");
+        return sprintf(buf, "%d\n", rdev->constraints->state_disk.uV);
+}
+
+static ssize_t regulator_suspend_standby_uV_show(struct device *dev,
+                                struct device_attribute *attr, char *buf)
+{
+        struct regulator_dev *rdev = to_rdev(dev);
+
+        if (!rdev->constraints)
+                return sprintf(buf, "not defined\n");
+        return sprintf(buf, "%d\n", rdev->constraints->state_standby.uV);
+}
+
+static ssize_t suspend_opmode_show(struct regulator_dev *rdev,
+        unsigned int mode, char *buf)
+{
+        switch (mode) {
+        case REGULATOR_MODE_FAST:
+                return sprintf(buf, "fast\n");
+        case REGULATOR_MODE_NORMAL:
+                return sprintf(buf, "normal\n");
+        case REGULATOR_MODE_IDLE:
+                return sprintf(buf, "idle\n");
+        case REGULATOR_MODE_STANDBY:
+                return sprintf(buf, "standby\n");
+        }
+        return sprintf(buf, "unknown\n");
+}
+
+static ssize_t regulator_suspend_mem_mode_show(struct device *dev,
+                                struct device_attribute *attr, char *buf)
+{
+        struct regulator_dev *rdev = to_rdev(dev);
+
+        if (!rdev->constraints)
+                return sprintf(buf, "not defined\n");
+        return suspend_opmode_show(rdev,
+                rdev->constraints->state_mem.mode, buf);
+}
+
+static ssize_t regulator_suspend_disk_mode_show(struct device *dev,
+                                struct device_attribute *attr, char *buf)
+{
+        struct regulator_dev *rdev = to_rdev(dev);
+
+        if (!rdev->constraints)
+                return sprintf(buf, "not defined\n");
+        return suspend_opmode_show(rdev,
+                rdev->constraints->state_disk.mode, buf);
+}
+
+static ssize_t regulator_suspend_standby_mode_show(struct device *dev,
+                                struct device_attribute *attr, char *buf)
+{
+        struct regulator_dev *rdev = to_rdev(dev);
+
+        if (!rdev->constraints)
+                return sprintf(buf, "not defined\n");
+        return suspend_opmode_show(rdev,
+                rdev->constraints->state_standby.mode, buf);
+}
+
+static ssize_t regulator_suspend_mem_state_show(struct device *dev,
+                                   struct device_attribute *attr, char *buf)
+{
+        struct regulator_dev *rdev = to_rdev(dev);
+
+        if (!rdev->constraints)
+                return sprintf(buf, "not defined\n");
+
+        if (rdev->constraints->state_mem.enabled)
+                return sprintf(buf, "enabled\n");
+        else
+                return sprintf(buf, "disabled\n");
+}
+
+static ssize_t regulator_suspend_disk_state_show(struct device *dev,
+                                   struct device_attribute *attr, char *buf)
+{
+        struct regulator_dev *rdev = to_rdev(dev);
+
+        if (!rdev->constraints)
+                return sprintf(buf, "not defined\n");
+
+        if (rdev->constraints->state_disk.enabled)
+                return sprintf(buf, "enabled\n");
+        else
+                return sprintf(buf, "disabled\n");
+}
+
+static ssize_t regulator_suspend_standby_state_show(struct device *dev,
+                                   struct device_attribute *attr, char *buf)
+{
+        struct regulator_dev *rdev = to_rdev(dev);
+
+        if (!rdev->constraints)
+                return sprintf(buf, "not defined\n");
+
+        if (rdev->constraints->state_standby.enabled)
+                return sprintf(buf, "enabled\n");
+        else
+                return sprintf(buf, "disabled\n");
+}
+static struct device_attribute regulator_dev_attrs[] = {
+        __ATTR(microvolts, 0444, regulator_uV_show, NULL),
+        __ATTR(microamps, 0444, regulator_uA_show, NULL),
+        __ATTR(opmode, 0444, regulator_opmode_show, NULL),
+        __ATTR(state, 0444, regulator_state_show, NULL),
+        __ATTR(min_microvolts, 0444, regulator_min_uV_show, NULL),
+        __ATTR(min_microamps, 0444, regulator_min_uA_show, NULL),
+        __ATTR(max_microvolts, 0444, regulator_max_uV_show, NULL),
+        __ATTR(max_microamps, 0444, regulator_max_uA_show, NULL),
+        __ATTR(requested_microamps, 0444, regulator_total_uA_show, NULL),
+        __ATTR(num_users, 0444, regulator_num_users_show, NULL),
+        __ATTR(type, 0444, regulator_type_show, NULL),
+        __ATTR(suspend_mem_microvolts, 0444,
+                regulator_suspend_mem_uV_show, NULL),
+        __ATTR(suspend_disk_microvolts, 0444,
+                regulator_suspend_disk_uV_show, NULL),
+        __ATTR(suspend_standby_microvolts, 0444,
+                regulator_suspend_standby_uV_show, NULL),
+        __ATTR(suspend_mem_mode, 0444,
+                regulator_suspend_mem_mode_show, NULL),
+        __ATTR(suspend_disk_mode, 0444,
+                regulator_suspend_disk_mode_show, NULL),
+        __ATTR(suspend_standby_mode, 0444,
+                regulator_suspend_standby_mode_show, NULL),
+        __ATTR(suspend_mem_state, 0444,
+                regulator_suspend_mem_state_show, NULL),
+        __ATTR(suspend_disk_state, 0444,
+                regulator_suspend_disk_state_show, NULL),
+        __ATTR(suspend_standby_state, 0444,
+                regulator_suspend_standby_state_show, NULL),
+        __ATTR_NULL,
+};
+
+static void regulator_dev_release(struct device *dev)
+{
+        struct regulator_dev *rdev = to_rdev(dev);
+        kfree(rdev);
+}
+
+static struct class regulator_class = {
+        .name = "regulator",
+        .dev_release = regulator_dev_release,
+        .dev_attrs = regulator_dev_attrs,
+};
+
+/* Calculate the new optimum regulator operating mode based on the new total
+ * consumer load. All locks held by caller */
+static void drms_uA_update(struct regulator_dev *rdev)
+{
+        struct regulator *sibling;
+        int current_uA = 0, output_uV, input_uV, err;
+        unsigned int mode;
+
+        err = regulator_check_drms(rdev);
+        if (err < 0 || !rdev->desc->ops->get_optimum_mode ||
+            !rdev->desc->ops->get_voltage || !rdev->desc->ops->set_mode);
+        return;
+
+        /* get output voltage */
+        output_uV = rdev->desc->ops->get_voltage(rdev);
+        if (output_uV <= 0)
+                return;
+
+        /* get input voltage */
+        if (rdev->supply && rdev->supply->desc->ops->get_voltage)
+                input_uV = rdev->supply->desc->ops->get_voltage(rdev->supply);
+        else
+                input_uV = rdev->constraints->input_uV;
+        if (input_uV <= 0)
+                return;
+
+        /* calc total requested load */
+        list_for_each_entry(sibling, &rdev->consumer_list, list)
+            current_uA += sibling->uA_load;
+
+        /* now get the optimum mode for our new total regulator load */
+        mode = rdev->desc->ops->get_optimum_mode(rdev, input_uV,
+                                                  output_uV, current_uA);
+
+        /* check the new mode is allowed */
+        err = regulator_check_mode(rdev, mode);
+        if (err == 0)
+                rdev->desc->ops->set_mode(rdev, mode);
+}
+
+static int suspend_set_state(struct regulator_dev *rdev,
+        struct regulator_state *rstate)
+{
+        int ret = 0;
+
+        /* enable & disable are mandatory for suspend control */
+        if (!rdev->desc->ops->set_suspend_enable ||
+                !rdev->desc->ops->set_suspend_disable)
+                return -EINVAL;
+
+        if (rstate->enabled)
+                ret = rdev->desc->ops->set_suspend_enable(rdev);
+        else
+                ret = rdev->desc->ops->set_suspend_disable(rdev);
+        if (ret < 0) {
+                printk(KERN_ERR "%s: failed to enabled/disable\n", __func__);
+                return ret;
+        }
+
+        if (rdev->desc->ops->set_suspend_voltage && rstate->uV > 0) {
+                ret = rdev->desc->ops->set_suspend_voltage(rdev, rstate->uV);
+                if (ret < 0) {
+                        printk(KERN_ERR "%s: failed to set voltage\n",
+                                __func__);
+                        return ret;
+                }
+        }
+
+        if (rdev->desc->ops->set_suspend_mode && rstate->mode > 0) {
+                ret = rdev->desc->ops->set_suspend_mode(rdev, rstate->mode);
+                if (ret < 0) {
+                        printk(KERN_ERR "%s: failed to set mode\n", __func__);
+                        return ret;
+                }
+        }
+        return ret;
+}
+
+/* locks held by caller */
+static int suspend_prepare(struct regulator_dev *rdev, suspend_state_t state)
+{
+        if (!rdev->constraints)
+                return -EINVAL;
+
+        switch (state) {
+        case PM_SUSPEND_STANDBY:
+                return suspend_set_state(rdev,
+                        &rdev->constraints->state_standby);
+        case PM_SUSPEND_MEM:
+                return suspend_set_state(rdev,
+                        &rdev->constraints->state_mem);
+        case PM_SUSPEND_MAX:
+                return suspend_set_state(rdev,
+                        &rdev->constraints->state_disk);
+        default:
+                return -EINVAL;
+        }
+}
+
+static void print_constraints(struct regulator_dev *rdev)
+{
+        struct regulation_constraints *constraints = rdev->constraints;
+        char buf[80];
+        int count;
+
+        if (rdev->desc->type == REGULATOR_VOLTAGE) {
+                if (constraints->min_uV == constraints->max_uV)
+                        count = sprintf(buf, "%d mV ",
+                                        constraints->min_uV / 1000);
+                else
+                        count = sprintf(buf, "%d <--> %d mV ",
+                                        constraints->min_uV / 1000,
+                                        constraints->max_uV / 1000);
+        } else {
+                if (constraints->min_uA == constraints->max_uA)
+                        count = sprintf(buf, "%d mA ",
+                                        constraints->min_uA / 1000);
+                else
+                        count = sprintf(buf, "%d <--> %d mA ",
+                                        constraints->min_uA / 1000,
+                                        constraints->max_uA / 1000);
+        }
+        if (constraints->valid_modes_mask & REGULATOR_MODE_FAST)
+                count += sprintf(buf + count, "fast ");
+        if (constraints->valid_modes_mask & REGULATOR_MODE_NORMAL)
+                count += sprintf(buf + count, "normal ");
+        if (constraints->valid_modes_mask & REGULATOR_MODE_IDLE)
+                count += sprintf(buf + count, "idle ");
+        if (constraints->valid_modes_mask & REGULATOR_MODE_STANDBY)
+                count += sprintf(buf + count, "standby");
+
+        printk(KERN_INFO "regulator: %s: %s\n", rdev->desc->name, buf);
+}
+
+#define REG_STR_SIZE    32
+
+static struct regulator *create_regulator(struct regulator_dev *rdev,
+                                          struct device *dev,
+                                          const char *supply_name)
+{
+        struct regulator *regulator;
+        char buf[REG_STR_SIZE];
+        int err, size;
+
+        regulator = kzalloc(sizeof(*regulator), GFP_KERNEL);
+        if (regulator == NULL)
+                return NULL;
+
+        mutex_lock(&rdev->mutex);
+        regulator->rdev = rdev;
+        list_add(&regulator->list, &rdev->consumer_list);
+
+        if (dev) {
+                /* create a 'requested_microamps_name' sysfs entry */
+                size = scnprintf(buf, REG_STR_SIZE, "microamps_requested_%s",
+                        supply_name);
+                if (size >= REG_STR_SIZE)
+                        goto overflow_err;
+
+                regulator->dev = dev;
+                regulator->dev_attr.attr.name = kstrdup(buf, GFP_KERNEL);
+                if (regulator->dev_attr.attr.name == NULL)
+                        goto attr_name_err;
+
+                regulator->dev_attr.attr.owner = THIS_MODULE;
+                regulator->dev_attr.attr.mode = 0444;
+                regulator->dev_attr.show = device_requested_uA_show;
+                err = device_create_file(dev, &regulator->dev_attr);
+                if (err < 0) {
+                        printk(KERN_WARNING "%s: could not add regulator_dev"
+                                " load sysfs\n", __func__);
+                        goto attr_name_err;
+                }
+
+                /* also add a link to the device sysfs entry */
+                size = scnprintf(buf, REG_STR_SIZE, "%s-%s",
+                                 dev->kobj.name, supply_name);
+                if (size >= REG_STR_SIZE)
+                        goto attr_err;
+
+                regulator->supply_name = kstrdup(buf, GFP_KERNEL);
+                if (regulator->supply_name == NULL)
+                        goto attr_err;
+
+                err = sysfs_create_link(&rdev->dev.kobj, &dev->kobj,
+                                        buf);
+                if (err) {
+                        printk(KERN_WARNING
+                               "%s: could not add device link %s err %d\n",
+                               __func__, dev->kobj.name, err);
+                        device_remove_file(dev, &regulator->dev_attr);
+                        goto link_name_err;
+                }
+        }
+        mutex_unlock(&rdev->mutex);
+        return regulator;
+link_name_err:
+        kfree(regulator->supply_name);
+attr_err:
+        device_remove_file(regulator->dev, &regulator->dev_attr);
+attr_name_err:
+        kfree(regulator->dev_attr.attr.name);
+overflow_err:
+        list_del(&regulator->list);
+        kfree(regulator);
+        mutex_unlock(&rdev->mutex);
+        return NULL;
+}
+
+/**
+ * regulator_get - lookup and obtain a reference to a regulator.
+ * @dev: device for regulator "consumer"
+ * @id: Supply name or regulator ID.
+ *
+ * Returns a struct regulator corresponding to the regulator producer,
+ * or IS_ERR() condition containing errno.  Use of supply names
+ * configured via regulator_set_device_supply() is strongly
+ * encouraged.
+ */
+struct regulator *regulator_get(struct device *dev, const char *id)
+{
+        struct regulator_dev *rdev;
+        struct regulator_map *map;
+        struct regulator *regulator = ERR_PTR(-ENODEV);
+        const char *supply = id;
+
+        if (id == NULL) {
+                printk(KERN_ERR "regulator: get() with no identifier\n");
+                return regulator;
+        }
+
+        mutex_lock(&regulator_list_mutex);
+
+        list_for_each_entry(map, &regulator_map_list, list) {
+                if (dev == map->dev &&
+                    strcmp(map->supply, id) == 0) {
+                        supply = map->regulator;
+                        break;
+                }
+        }
+
+        list_for_each_entry(rdev, &regulator_list, list) {
+                if (strcmp(supply, rdev->desc->name) == 0 &&
+                    try_module_get(rdev->owner))
+                        goto found;
+        }
+        printk(KERN_ERR "regulator: Unable to get requested regulator: %s\n",
+               id);
+        mutex_unlock(&regulator_list_mutex);
+        return regulator;
+
+found:
+        regulator = create_regulator(rdev, dev, id);
+        if (regulator == NULL) {
+                regulator = ERR_PTR(-ENOMEM);
+                module_put(rdev->owner);
+        }
+
+        mutex_unlock(&regulator_list_mutex);
+        return regulator;
+}
+EXPORT_SYMBOL_GPL(regulator_get);
+
+/**
+ * regulator_put - "free" the regulator source
+ * @regulator: regulator source
+ *
+ * Note: drivers must ensure that all regulator_enable calls made on this
+ * regulator source are balanced by regulator_disable calls prior to calling
+ * this function.
+ */
+void regulator_put(struct regulator *regulator)
+{
+        struct regulator_dev *rdev;
+
+        if (regulator == NULL || IS_ERR(regulator))
+                return;
+
+        if (regulator->enabled) {
+                printk(KERN_WARNING "Releasing supply %s while enabled\n",
+                       regulator->supply_name);
+                WARN_ON(regulator->enabled);
+                regulator_disable(regulator);
+        }
+
+        mutex_lock(&regulator_list_mutex);
+        rdev = regulator->rdev;
+
+        /* remove any sysfs entries */
+        if (regulator->dev) {
+                sysfs_remove_link(&rdev->dev.kobj, regulator->supply_name);
+                kfree(regulator->supply_name);
+                device_remove_file(regulator->dev, &regulator->dev_attr);
+                kfree(regulator->dev_attr.attr.name);
+        }
+        list_del(&regulator->list);
+        kfree(regulator);
+
+        module_put(rdev->owner);
+        mutex_unlock(&regulator_list_mutex);
+}
+EXPORT_SYMBOL_GPL(regulator_put);
+
+/* locks held by regulator_enable() */
+static int _regulator_enable(struct regulator_dev *rdev)
+{
+        int ret = -EINVAL;
+
+        if (!rdev->constraints) {
+                printk(KERN_ERR "%s: %s has no constraints\n",
+                       __func__, rdev->desc->name);
+                return ret;
+        }
+
+        /* do we need to enable the supply regulator first */
+        if (rdev->supply) {
+                ret = _regulator_enable(rdev->supply);
+                if (ret < 0) {
+                        printk(KERN_ERR "%s: failed to enable %s: %d\n",
+                               __func__, rdev->desc->name, ret);
+                        return ret;
+                }
+        }
+
+        /* check voltage and requested load before enabling */
+        if (rdev->desc->ops->enable) {
+
+                if (rdev->constraints &&
+                        (rdev->constraints->valid_ops_mask &
+                        REGULATOR_CHANGE_DRMS))
+                        drms_uA_update(rdev);
+
+                ret = rdev->desc->ops->enable(rdev);
+                if (ret < 0) {
+                        printk(KERN_ERR "%s: failed to enable %s: %d\n",
+                               __func__, rdev->desc->name, ret);
+                        return ret;
+                }
+                rdev->use_count++;
+                return ret;
+        }
+
+        return ret;
+}
+
+/**
+ * regulator_enable - enable regulator output
+ * @regulator: regulator source
+ *
+ * Enable the regulator output at the predefined voltage or current value.
+ * NOTE: the output value can be set by other drivers, boot loader or may be
+ * hardwired in the regulator.
+ * NOTE: calls to regulator_enable() must be balanced with calls to
+ * regulator_disable().
+ */
+int regulator_enable(struct regulator *regulator)
+{
+        int ret;
+
+        if (regulator->enabled) {
+                printk(KERN_CRIT "Regulator %s already enabled\n",
+                       regulator->supply_name);
+                WARN_ON(regulator->enabled);
+                return 0;
+        }
+
+        mutex_lock(&regulator->rdev->mutex);
+        regulator->enabled = 1;
+        ret = _regulator_enable(regulator->rdev);
+        if (ret != 0)
+                regulator->enabled = 0;
+        mutex_unlock(&regulator->rdev->mutex);
+        return ret;
+}
+EXPORT_SYMBOL_GPL(regulator_enable);
+
+/* locks held by regulator_disable() */
+static int _regulator_disable(struct regulator_dev *rdev)
+{
+        int ret = 0;
+
+        /* are we the last user and permitted to disable ? */
+        if (rdev->use_count == 1 && !rdev->constraints->always_on) {
+
+                /* we are last user */
+                if (rdev->desc->ops->disable) {
+                        ret = rdev->desc->ops->disable(rdev);
+                        if (ret < 0) {
+                                printk(KERN_ERR "%s: failed to disable %s\n",
+                                       __func__, rdev->desc->name);
+                                return ret;
+                        }
+                }
+
+                /* decrease our supplies ref count and disable if required */
+                if (rdev->supply)
+                        _regulator_disable(rdev->supply);
+
+                rdev->use_count = 0;
+        } else if (rdev->use_count > 1) {
+
+                if (rdev->constraints &&
+                        (rdev->constraints->valid_ops_mask &
+                        REGULATOR_CHANGE_DRMS))
+                        drms_uA_update(rdev);
+
+                rdev->use_count--;
+        }
+        return ret;
+}
+
+/**
+ * regulator_disable - disable regulator output
+ * @regulator: regulator source
+ *
+ * Disable the regulator output voltage or current.
+ * NOTE: this will only disable the regulator output if no other consumer
+ * devices have it enabled.
+ * NOTE: calls to regulator_enable() must be balanced with calls to
+ * regulator_disable().
+ */
+int regulator_disable(struct regulator *regulator)
+{
+        int ret;
+
+        if (!regulator->enabled) {
+                printk(KERN_ERR "%s: not in use by this consumer\n",
+                        __func__);
+                return 0;
+        }
+
+        mutex_lock(&regulator->rdev->mutex);
+        regulator->enabled = 0;
+        regulator->uA_load = 0;
+        ret = _regulator_disable(regulator->rdev);
+        mutex_unlock(&regulator->rdev->mutex);
+        return ret;
+}
+EXPORT_SYMBOL_GPL(regulator_disable);
+
+/* locks held by regulator_force_disable() */
+static int _regulator_force_disable(struct regulator_dev *rdev)
+{
+        int ret = 0;
+
+        /* force disable */
+        if (rdev->desc->ops->disable) {
+                /* ah well, who wants to live forever... */
+                ret = rdev->desc->ops->disable(rdev);
+                if (ret < 0) {
+                        printk(KERN_ERR "%s: failed to force disable %s\n",
+                               __func__, rdev->desc->name);
+                        return ret;
+                }
+                /* notify other consumers that power has been forced off */
+                _notifier_call_chain(rdev, REGULATOR_EVENT_FORCE_DISABLE,
+                        NULL);
+        }
+
+        /* decrease our supplies ref count and disable if required */
+        if (rdev->supply)
+                _regulator_disable(rdev->supply);
+
+        rdev->use_count = 0;
+        return ret;
+}
+
+/**
+ * regulator_force_disable - force disable regulator output
+ * @regulator: regulator source
+ *
+ * Forcibly disable the regulator output voltage or current.
+ * NOTE: this *will* disable the regulator output even if other consumer
+ * devices have it enabled. This should be used for situations when device
+ * damage will likely occur if the regulator is not disabled (e.g. over temp).
+ */
+int regulator_force_disable(struct regulator *regulator)
+{
+        int ret;
+
+        mutex_lock(&regulator->rdev->mutex);
+        regulator->enabled = 0;
+        regulator->uA_load = 0;
+        ret = _regulator_force_disable(regulator->rdev);
+        mutex_unlock(&regulator->rdev->mutex);
+        return ret;
+}
+EXPORT_SYMBOL_GPL(regulator_force_disable);
+
+static int _regulator_is_enabled(struct regulator_dev *rdev)
+{
+        int ret;
+
+        mutex_lock(&rdev->mutex);
+
+        /* sanity check */
+        if (!rdev->desc->ops->is_enabled) {
+                ret = -EINVAL;
+                goto out;
+        }
+
+        ret = rdev->desc->ops->is_enabled(rdev);
+out:
+        mutex_unlock(&rdev->mutex);
+        return ret;
+}
+
+/**
+ * regulator_is_enabled - is the regulator output enabled
+ * @regulator: regulator source
+ *
+ * Returns zero for disabled otherwise return number of enable requests.
+ */
+int regulator_is_enabled(struct regulator *regulator)
+{
+        return _regulator_is_enabled(regulator->rdev);
+}
+EXPORT_SYMBOL_GPL(regulator_is_enabled);
+
+/**
+ * regulator_set_voltage - set regulator output voltage
+ * @regulator: regulator source
+ * @min_uV: Minimum required voltage in uV
+ * @max_uV: Maximum acceptable voltage in uV
+ *
+ * Sets a voltage regulator to the desired output voltage. This can be set
+ * during any regulator state. IOW, regulator can be disabled or enabled.
+ *
+ * If the regulator is enabled then the voltage will change to the new value
+ * immediately otherwise if the regulator is disabled the regulator will
+ * output at the new voltage when enabled.
+ *
+ * NOTE: If the regulator is shared between several devices then the lowest
+ * request voltage that meets the system constraints will be used.
+ * NOTE: Regulator system constraints must be set for this regulator before
+ * calling this function otherwise this call will fail.
+ */
+int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV)
+{
+        struct regulator_dev *rdev = regulator->rdev;
+        int ret;
+
+        mutex_lock(&rdev->mutex);
+
+        /* sanity check */
+        if (!rdev->desc->ops->set_voltage) {
+                ret = -EINVAL;
+                goto out;
+        }
+
+        /* constraints check */
+        ret = regulator_check_voltage(rdev, &min_uV, &max_uV);
+        if (ret < 0)
+                goto out;
+        regulator->min_uV = min_uV;
+        regulator->max_uV = max_uV;
+        ret = rdev->desc->ops->set_voltage(rdev, min_uV, max_uV);
+
+out:
+        mutex_unlock(&rdev->mutex);
+        return ret;
+}
+EXPORT_SYMBOL_GPL(regulator_set_voltage);
+
+static int _regulator_get_voltage(struct regulator_dev *rdev)
+{
+        /* sanity check */
+        if (rdev->desc->ops->get_voltage)
+                return rdev->desc->ops->get_voltage(rdev);
+        else
+                return -EINVAL;
+}
+
+/**
+ * regulator_get_voltage - get regulator output voltage
+ * @regulator: regulator source
+ *
+ * This returns the current regulator voltage in uV.
+ *
+ * NOTE: If the regulator is disabled it will return the voltage value. This
+ * function should not be used to determine regulator state.
+ */
+int regulator_get_voltage(struct regulator *regulator)
+{
+        int ret;
+
+        mutex_lock(&regulator->rdev->mutex);
+
+        ret = _regulator_get_voltage(regulator->rdev);
+
+        mutex_unlock(&regulator->rdev->mutex);
+
+        return ret;
+}
+EXPORT_SYMBOL_GPL(regulator_get_voltage);
+
+/**
+ * regulator_set_current_limit - set regulator output current limit
+ * @regulator: regulator source
+ * @min_uA: Minimuum supported current in uA
+ * @max_uA: Maximum supported current in uA
+ *
+ * Sets current sink to the desired output current. This can be set during
+ * any regulator state. IOW, regulator can be disabled or enabled.
+ *
+ * If the regulator is enabled then the current will change to the new value
+ * immediately otherwise if the regulator is disabled the regulator will
+ * output at the new current when enabled.
+ *
+ * NOTE: Regulator system constraints must be set for this regulator before
+ * calling this function otherwise this call will fail.
+ */
+int regulator_set_current_limit(struct regulator *regulator,
+                               int min_uA, int max_uA)
+{
+        struct regulator_dev *rdev = regulator->rdev;
+        int ret;
+
+        mutex_lock(&rdev->mutex);
+
+        /* sanity check */
+        if (!rdev->desc->ops->set_current_limit) {
+                ret = -EINVAL;
+                goto out;
+        }
+
+        /* constraints check */
+        ret = regulator_check_current_limit(rdev, &min_uA, &max_uA);
+        if (ret < 0)
+                goto out;
+
+        ret = rdev->desc->ops->set_current_limit(rdev, min_uA, max_uA);
+out:
+        mutex_unlock(&rdev->mutex);
+        return ret;
+}
+EXPORT_SYMBOL_GPL(regulator_set_current_limit);
+
+static int _regulator_get_current_limit(struct regulator_dev *rdev)
+{
+        int ret;
+
+        mutex_lock(&rdev->mutex);
+
+        /* sanity check */
+        if (!rdev->desc->ops->get_current_limit) {
+                ret = -EINVAL;
+                goto out;
+        }
+
+        ret = rdev->desc->ops->get_current_limit(rdev);
+out:
+        mutex_unlock(&rdev->mutex);
+        return ret;
+}
+
+/**
+ * regulator_get_current_limit - get regulator output current
+ * @regulator: regulator source
+ *
+ * This returns the current supplied by the specified current sink in uA.
+ *
+ * NOTE: If the regulator is disabled it will return the current value. This
+ * function should not be used to determine regulator state.
+ */
+int regulator_get_current_limit(struct regulator *regulator)
+{
+        return _regulator_get_current_limit(regulator->rdev);
+}
+EXPORT_SYMBOL_GPL(regulator_get_current_limit);
+
+/**
+ * regulator_set_mode - set regulator operating mode
+ * @regulator: regulator source
+ * @mode: operating mode - one of the REGULATOR_MODE constants
+ *
+ * Set regulator operating mode to increase regulator efficiency or improve
+ * regulation performance.
+ *
+ * NOTE: Regulator system constraints must be set for this regulator before
+ * calling this function otherwise this call will fail.
+ */
+int regulator_set_mode(struct regulator *regulator, unsigned int mode)
+{
+        struct regulator_dev *rdev = regulator->rdev;
+        int ret;
+
+        mutex_lock(&rdev->mutex);
+
+        /* sanity check */
+        if (!rdev->desc->ops->set_mode) {
+                ret = -EINVAL;
+                goto out;
+        }
+
+        /* constraints check */
+        ret = regulator_check_mode(rdev, mode);
+        if (ret < 0)
+                goto out;
+
+        ret = rdev->desc->ops->set_mode(rdev, mode);
+out:
+        mutex_unlock(&rdev->mutex);
+        return ret;
+}
+EXPORT_SYMBOL_GPL(regulator_set_mode);
+
+static unsigned int _regulator_get_mode(struct regulator_dev *rdev)
+{
+        int ret;
+
+        mutex_lock(&rdev->mutex);
+
+        /* sanity check */
+        if (!rdev->desc->ops->get_mode) {
+                ret = -EINVAL;
+                goto out;
+        }
+
+        ret = rdev->desc->ops->get_mode(rdev);
+out:
+        mutex_unlock(&rdev->mutex);
+        return ret;
+}
+
+/**
+ * regulator_get_mode - get regulator operating mode
+ * @regulator: regulator source
+ *
+ * Get the current regulator operating mode.
+ */
+unsigned int regulator_get_mode(struct regulator *regulator)
+{
+        return _regulator_get_mode(regulator->rdev);
+}
+EXPORT_SYMBOL_GPL(regulator_get_mode);
+
+/**
+ * regulator_set_optimum_mode - set regulator optimum operating mode
+ * @regulator: regulator source
+ * @uA_load: load current
+ *
+ * Notifies the regulator core of a new device load. This is then used by
+ * DRMS (if enabled by constraints) to set the most efficient regulator
+ * operating mode for the new regulator loading.
+ *
+ * Consumer devices notify their supply regulator of the maximum power
+ * they will require (can be taken from device datasheet in the power
+ * consumption tables) when they change operational status and hence power
+ * state. Examples of operational state changes that can affect power
+ * consumption are :-
+ *
+ *    o Device is opened / closed.
+ *    o Device I/O is about to begin or has just finished.
+ *    o Device is idling in between work.
+ *
+ * This information is also exported via sysfs to userspace.
+ *
+ * DRMS will sum the total requested load on the regulator and change
+ * to the most efficient operating mode if platform constraints allow.
+ *
+ * Returns the new regulator mode or error.
+ */
+int regulator_set_optimum_mode(struct regulator *regulator, int uA_load)
+{
+        struct regulator_dev *rdev = regulator->rdev;
+        struct regulator *consumer;
+        int ret, output_uV, input_uV, total_uA_load = 0;
+        unsigned int mode;
+
+        mutex_lock(&rdev->mutex);
+
+        regulator->uA_load = uA_load;
+        ret = regulator_check_drms(rdev);
+        if (ret < 0)
+                goto out;
+        ret = -EINVAL;
+
+        /* sanity check */
+        if (!rdev->desc->ops->get_optimum_mode)
+                goto out;
+
+        /* get output voltage */
+        output_uV = rdev->desc->ops->get_voltage(rdev);
+        if (output_uV <= 0) {
+                printk(KERN_ERR "%s: invalid output voltage found for %s\n",
+                        __func__, rdev->desc->name);
+                goto out;
+        }
+
+        /* get input voltage */
+        if (rdev->supply && rdev->supply->desc->ops->get_voltage)
+                input_uV = rdev->supply->desc->ops->get_voltage(rdev->supply);
+        else
+                input_uV = rdev->constraints->input_uV;
+        if (input_uV <= 0) {
+                printk(KERN_ERR "%s: invalid input voltage found for %s\n",
+                        __func__, rdev->desc->name);
+                goto out;
+        }
+
+        /* calc total requested load for this regulator */
+        list_for_each_entry(consumer, &rdev->consumer_list, list)
+            total_uA_load += consumer->uA_load;
+
+        mode = rdev->desc->ops->get_optimum_mode(rdev,
+                                                 input_uV, output_uV,
+                                                 total_uA_load);
+        if (ret <= 0) {
+                printk(KERN_ERR "%s: failed to get optimum mode for %s @"
+                        " %d uA %d -> %d uV\n", __func__, rdev->desc->name,
+                        total_uA_load, input_uV, output_uV);
+                goto out;
+        }
+
+        ret = rdev->desc->ops->set_mode(rdev, mode);
+        if (ret <= 0) {
+                printk(KERN_ERR "%s: failed to set optimum mode %x for %s\n",
+                        __func__, mode, rdev->desc->name);
+                goto out;
+        }
+        ret = mode;
+out:
+        mutex_unlock(&rdev->mutex);
+        return ret;
+}
+EXPORT_SYMBOL_GPL(regulator_set_optimum_mode);
+
+/**
+ * regulator_register_notifier - register regulator event notifier
+ * @regulator: regulator source
+ * @notifier_block: notifier block
+ *
+ * Register notifier block to receive regulator events.
+ */
+int regulator_register_notifier(struct regulator *regulator,
+                              struct notifier_block *nb)
+{
+        return blocking_notifier_chain_register(&regulator->rdev->notifier,
+                                                nb);
+}
+EXPORT_SYMBOL_GPL(regulator_register_notifier);
+
+/**
+ * regulator_unregister_notifier - unregister regulator event notifier
+ * @regulator: regulator source
+ * @notifier_block: notifier block
+ *
+ * Unregister regulator event notifier block.
+ */
+int regulator_unregister_notifier(struct regulator *regulator,
+                                struct notifier_block *nb)
+{
+        return blocking_notifier_chain_unregister(&regulator->rdev->notifier,
+                                                  nb);
+}
+EXPORT_SYMBOL_GPL(regulator_unregister_notifier);
+
+/* notify regulator consumers and downstream regulator consumers */
+static void _notifier_call_chain(struct regulator_dev *rdev,
+                                  unsigned long event, void *data)
+{
+        struct regulator_dev *_rdev;
+
+        /* call rdev chain first */
+        mutex_lock(&rdev->mutex);
+        blocking_notifier_call_chain(&rdev->notifier, event, NULL);
+        mutex_unlock(&rdev->mutex);
+
+        /* now notify regulator we supply */
+        list_for_each_entry(_rdev, &rdev->supply_list, slist)
+                _notifier_call_chain(_rdev, event, data);
+}
+
+/**
+ * regulator_bulk_get - get multiple regulator consumers
+ *
+ * @dev:           Device to supply
+ * @num_consumers: Number of consumers to register
+ * @consumers:     Configuration of consumers; clients are stored here.
+ *
+ * @return 0 on success, an errno on failure.
+ *
+ * This helper function allows drivers to get several regulator
+ * consumers in one operation.  If any of the regulators cannot be
+ * acquired then any regulators that were allocated will be freed
+ * before returning to the caller.
+ */
+int regulator_bulk_get(struct device *dev, int num_consumers,
+                       struct regulator_bulk_data *consumers)
+{
+        int i;
+        int ret;
+
+        for (i = 0; i < num_consumers; i++)
+                consumers[i].consumer = NULL;
+
+        for (i = 0; i < num_consumers; i++) {
+                consumers[i].consumer = regulator_get(dev,
+                                                      consumers[i].supply);
+                if (IS_ERR(consumers[i].consumer)) {
+                        dev_err(dev, "Failed to get supply '%s'\n",
+                                consumers[i].supply);
+                        ret = PTR_ERR(consumers[i].consumer);
+                        consumers[i].consumer = NULL;
+                        goto err;
+                }
+        }
+
+        return 0;
+
+err:
+        for (i = 0; i < num_consumers && consumers[i].consumer; i++)
+                regulator_put(consumers[i].consumer);
+
+        return ret;
+}
+EXPORT_SYMBOL_GPL(regulator_bulk_get);
+
+/**
+ * regulator_bulk_enable - enable multiple regulator consumers
+ *
+ * @num_consumers: Number of consumers
+ * @consumers:     Consumer data; clients are stored here.
+ * @return         0 on success, an errno on failure
+ *
+ * This convenience API allows consumers to enable multiple regulator
+ * clients in a single API call.  If any consumers cannot be enabled
+ * then any others that were enabled will be disabled again prior to
+ * return.
+ */
+int regulator_bulk_enable(int num_consumers,
+                          struct regulator_bulk_data *consumers)
+{
+        int i;
+        int ret;
+
+        for (i = 0; i < num_consumers; i++) {
+                ret = regulator_enable(consumers[i].consumer);
+                if (ret != 0)
+                        goto err;
+        }
+
+        return 0;
+
+err:
+        printk(KERN_ERR "Failed to enable %s\n", consumers[i].supply);
+        for (i = 0; i < num_consumers; i++)
+                regulator_disable(consumers[i].consumer);
+
+        return ret;
+}
+EXPORT_SYMBOL_GPL(regulator_bulk_enable);
+
+/**
+ * regulator_bulk_disable - disable multiple regulator consumers
+ *
+ * @num_consumers: Number of consumers
+ * @consumers:     Consumer data; clients are stored here.
+ * @return         0 on success, an errno on failure
+ *
+ * This convenience API allows consumers to disable multiple regulator
+ * clients in a single API call.  If any consumers cannot be enabled
+ * then any others that were disabled will be disabled again prior to
+ * return.
+ */
+int regulator_bulk_disable(int num_consumers,
+                           struct regulator_bulk_data *consumers)
+{
+        int i;
+        int ret;
+
+        for (i = 0; i < num_consumers; i++) {
+                ret = regulator_disable(consumers[i].consumer);
+                if (ret != 0)
+                        goto err;
+        }
+
+        return 0;
+
+err:
+        printk(KERN_ERR "Failed to disable %s\n", consumers[i].supply);
+        for (i = 0; i < num_consumers; i++)
+                regulator_enable(consumers[i].consumer);
+
+        return ret;
+}
+EXPORT_SYMBOL_GPL(regulator_bulk_disable);
+
+/**
+ * regulator_bulk_free - free multiple regulator consumers
+ *
+ * @num_consumers: Number of consumers
+ * @consumers:     Consumer data; clients are stored here.
+ *
+ * This convenience API allows consumers to free multiple regulator
+ * clients in a single API call.
+ */
+void regulator_bulk_free(int num_consumers,
+                         struct regulator_bulk_data *consumers)
+{
+        int i;
+
+        for (i = 0; i < num_consumers; i++) {
+                regulator_put(consumers[i].consumer);
+                consumers[i].consumer = NULL;
+        }
+}
+EXPORT_SYMBOL_GPL(regulator_bulk_free);
+
+/**
+ * regulator_notifier_call_chain - call regulator event notifier
+ * @regulator: regulator source
+ * @event: notifier block
+ * @data:
+ *
+ * Called by regulator drivers to notify clients a regulator event has
+ * occurred. We also notify regulator clients downstream.
+ */
+int regulator_notifier_call_chain(struct regulator_dev *rdev,
+                                  unsigned long event, void *data)
+{
+        _notifier_call_chain(rdev, event, data);
+        return NOTIFY_DONE;
+
+}
+EXPORT_SYMBOL_GPL(regulator_notifier_call_chain);
+
+/**
+ * regulator_register - register regulator
+ * @regulator: regulator source
+ * @reg_data: private regulator data
+ *
+ * Called by regulator drivers to register a regulator.
+ * Returns 0 on success.
+ */
+struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc,
+                                          void *reg_data)
+{
+        static atomic_t regulator_no = ATOMIC_INIT(0);
+        struct regulator_dev *rdev;
+        int ret;
+
+        if (regulator_desc == NULL)
+                return ERR_PTR(-EINVAL);
+
+        if (regulator_desc->name == NULL || regulator_desc->ops == NULL)
+                return ERR_PTR(-EINVAL);
+
+        if (!regulator_desc->type == REGULATOR_VOLTAGE &&
+            !regulator_desc->type == REGULATOR_CURRENT)
+                return ERR_PTR(-EINVAL);
+
+        rdev = kzalloc(sizeof(struct regulator_dev), GFP_KERNEL);
+        if (rdev == NULL)
+                return ERR_PTR(-ENOMEM);
+
+        mutex_lock(&regulator_list_mutex);
+
+        mutex_init(&rdev->mutex);
+        rdev->reg_data = reg_data;
+        rdev->owner = regulator_desc->owner;
+        rdev->desc = regulator_desc;
+        INIT_LIST_HEAD(&rdev->consumer_list);
+        INIT_LIST_HEAD(&rdev->supply_list);
+        INIT_LIST_HEAD(&rdev->list);
+        INIT_LIST_HEAD(&rdev->slist);
+        BLOCKING_INIT_NOTIFIER_HEAD(&rdev->notifier);
+
+        rdev->dev.class = &regulator_class;
+        device_initialize(&rdev->dev);
+        snprintf(rdev->dev.bus_id, sizeof(rdev->dev.bus_id),
+                 "regulator_%ld_%s",
+                 (unsigned long)atomic_inc_return(&regulator_no) - 1,
+                 regulator_desc->name);
+
+        ret = device_add(&rdev->dev);
+        if (ret == 0)
+                list_add(&rdev->list, &regulator_list);
+        else {
+                kfree(rdev);
+                rdev = ERR_PTR(ret);
+        }
+        mutex_unlock(&regulator_list_mutex);
+        return rdev;
+}
+EXPORT_SYMBOL_GPL(regulator_register);
+
+/**
+ * regulator_unregister - unregister regulator
+ * @regulator: regulator source
+ *
+ * Called by regulator drivers to unregister a regulator.
+ */
+void regulator_unregister(struct regulator_dev *rdev)
+{
+        if (rdev == NULL)
+                return;
+
+        mutex_lock(&regulator_list_mutex);
+        list_del(&rdev->list);
+        if (rdev->supply)
+                sysfs_remove_link(&rdev->dev.kobj, "supply");
+        device_unregister(&rdev->dev);
+        mutex_unlock(&regulator_list_mutex);
+}
+EXPORT_SYMBOL_GPL(regulator_unregister);
+
+/**
+ * regulator_set_supply - set regulator supply regulator
+ * @regulator: regulator name
+ * @supply: supply regulator name
+ *
+ * Called by platform initialisation code to set the supply regulator for this
+ * regulator. This ensures that a regulators supply will also be enabled by the
+ * core if it's child is enabled.
+ */
+int regulator_set_supply(const char *regulator, const char *supply)
+{
+        struct regulator_dev *rdev, *supply_rdev;
+        int err;
+
+        if (regulator == NULL || supply == NULL)
+                return -EINVAL;
+
+        mutex_lock(&regulator_list_mutex);
+
+        list_for_each_entry(rdev, &regulator_list, list) {
+                if (!strcmp(rdev->desc->name, regulator))
+                        goto found_regulator;
+        }
+        mutex_unlock(&regulator_list_mutex);
+        return -ENODEV;
+
+found_regulator:
+        list_for_each_entry(supply_rdev, &regulator_list, list) {
+                if (!strcmp(supply_rdev->desc->name, supply))
+                        goto found_supply;
+        }
+        mutex_unlock(&regulator_list_mutex);
+        return -ENODEV;
+
+found_supply:
+        err = sysfs_create_link(&rdev->dev.kobj, &supply_rdev->dev.kobj,
+                                "supply");
+        if (err) {
+                printk(KERN_ERR
+                       "%s: could not add device link %s err %d\n",
+                       __func__, supply_rdev->dev.kobj.name, err);
+                       goto out;
+        }
+        rdev->supply = supply_rdev;
+        list_add(&rdev->slist, &supply_rdev->supply_list);
+out:
+        mutex_unlock(&regulator_list_mutex);
+        return err;
+}
+EXPORT_SYMBOL_GPL(regulator_set_supply);
+
+/**
+ * regulator_get_supply - get regulator supply regulator
+ * @regulator: regulator name
+ *
+ * Returns the supply supply regulator name or NULL if no supply regulator
+ * exists (i.e the regulator is supplied directly from USB, Line, Battery, etc)
+ */
+const char *regulator_get_supply(const char *regulator)
+{
+        struct regulator_dev *rdev;
+
+        if (regulator == NULL)
+                return NULL;
+
+        mutex_lock(&regulator_list_mutex);
+        list_for_each_entry(rdev, &regulator_list, list) {
+                if (!strcmp(rdev->desc->name, regulator))
+                        goto found;
+        }
+        mutex_unlock(&regulator_list_mutex);
+        return NULL;
+
+found:
+        mutex_unlock(&regulator_list_mutex);
+        if (rdev->supply)
+                return rdev->supply->desc->name;
+        else
+                return NULL;
+}
+EXPORT_SYMBOL_GPL(regulator_get_supply);
+
+/**
+ * regulator_set_machine_constraints - sets regulator constraints
+ * @regulator: regulator source
+ *
+ * Allows platform initialisation code to define and constrain
+ * regulator circuits e.g. valid voltage/current ranges, etc.  NOTE:
+ * Constraints *must* be set by platform code in order for some
+ * regulator operations to proceed i.e. set_voltage, set_current_limit,
+ * set_mode.
+ */
+int regulator_set_machine_constraints(const char *regulator_name,
+        struct regulation_constraints *constraints)
+{
+        struct regulator_dev *rdev;
+        int ret = 0;
+
+        if (regulator_name == NULL)
+                return -EINVAL;
+
+        mutex_lock(&regulator_list_mutex);
+
+        list_for_each_entry(rdev, &regulator_list, list) {
+                if (!strcmp(regulator_name, rdev->desc->name))
+                        goto found;
+        }
+        ret = -ENODEV;
+        goto out;
+
+found:
+        mutex_lock(&rdev->mutex);
+        rdev->constraints = constraints;
+
+        /* do we need to apply the constraint voltage */
+        if (rdev->constraints->apply_uV &&
+                rdev->constraints->min_uV == rdev->constraints->max_uV &&
+                rdev->desc->ops->set_voltage) {
+                ret = rdev->desc->ops->set_voltage(rdev,
+                        rdev->constraints->min_uV, rdev->constraints->max_uV);
+                        if (ret < 0) {
+                                printk(KERN_ERR "%s: failed to apply %duV"
+                                        " constraint\n", __func__,
+                                        rdev->constraints->min_uV);
+                                rdev->constraints = NULL;
+                                goto out;
+                        }
+        }
+
+        /* are we enabled at boot time by firmware / bootloader */
+        if (rdev->constraints->boot_on)
+                rdev->use_count = 1;
+
+        /* do we need to setup our suspend state */
+        if (constraints->initial_state)
+                ret = suspend_prepare(rdev, constraints->initial_state);
+
+        print_constraints(rdev);
+        mutex_unlock(&rdev->mutex);
+
+out:
+        mutex_unlock(&regulator_list_mutex);
+        return ret;
+}
+EXPORT_SYMBOL_GPL(regulator_set_machine_constraints);
+
+
+/**
+ * regulator_set_device_supply: Bind a regulator to a symbolic supply
+ * @regulator: regulator source
+ * @dev:       device the supply applies to
+ * @supply:    symbolic name for supply
+ *
+ * Allows platform initialisation code to map physical regulator
+ * sources to symbolic names for supplies for use by devices.  Devices
+ * should use these symbolic names to request regulators, avoiding the
+ * need to provide board-specific regulator names as platform data.
+ */
+int regulator_set_device_supply(const char *regulator, struct device *dev,
+                                const char *supply)
+{
+        struct regulator_map *node;
+
+        if (regulator == NULL || supply == NULL)
+                return -EINVAL;
+
+        node = kmalloc(sizeof(struct regulator_map), GFP_KERNEL);
+        if (node == NULL)
+                return -ENOMEM;
+
+        node->regulator = regulator;
+        node->dev = dev;
+        node->supply = supply;
+
+        mutex_lock(&regulator_list_mutex);
+        list_add(&node->list, &regulator_map_list);
+        mutex_unlock(&regulator_list_mutex);
+        return 0;
+}
+EXPORT_SYMBOL_GPL(regulator_set_device_supply);
+
+/**
+ * regulator_suspend_prepare: prepare regulators for system wide suspend
+ * @state: system suspend state
+ *
+ * Configure each regulator with it's suspend operating parameters for state.
+ * This will usually be called by machine suspend code prior to supending.
+ */
+int regulator_suspend_prepare(suspend_state_t state)
+{
+        struct regulator_dev *rdev;
+        int ret = 0;
+
+        /* ON is handled by regulator active state */
+        if (state == PM_SUSPEND_ON)
+                return -EINVAL;
+
+        mutex_lock(&regulator_list_mutex);
+        list_for_each_entry(rdev, &regulator_list, list) {
+
+                mutex_lock(&rdev->mutex);
+                ret = suspend_prepare(rdev, state);
+                mutex_unlock(&rdev->mutex);
+
+                if (ret < 0) {
+                        printk(KERN_ERR "%s: failed to prepare %s\n",
+                                __func__, rdev->desc->name);
+                        goto out;
+                }
+        }
+out:
+        mutex_unlock(&regulator_list_mutex);
+        return ret;
+}
+EXPORT_SYMBOL_GPL(regulator_suspend_prepare);
+
+/**
+ * rdev_get_drvdata - get rdev regulator driver data
+ * @regulator: regulator
+ *
+ * Get rdev regulator driver private data. This call can be used in the
+ * regulator driver context.
+ */
+void *rdev_get_drvdata(struct regulator_dev *rdev)
+{
+        return rdev->reg_data;
+}
+EXPORT_SYMBOL_GPL(rdev_get_drvdata);
+
+/**
+ * regulator_get_drvdata - get regulator driver data
+ * @regulator: regulator
+ *
+ * Get regulator driver private data. This call can be used in the consumer
+ * driver context when non API regulator specific functions need to be called.
+ */
+void *regulator_get_drvdata(struct regulator *regulator)
+{
+        return regulator->rdev->reg_data;
+}
+EXPORT_SYMBOL_GPL(regulator_get_drvdata);
+
+/**
+ * regulator_set_drvdata - set regulator driver data
+ * @regulator: regulator
+ * @data: data
+ */
+void regulator_set_drvdata(struct regulator *regulator, void *data)
+{
+        regulator->rdev->reg_data = data;
+}
+EXPORT_SYMBOL_GPL(regulator_set_drvdata);
+
+/**
+ * regulator_get_id - get regulator ID
+ * @regulator: regulator
+ */
+int rdev_get_id(struct regulator_dev *rdev)
+{
+        return rdev->desc->id;
+}
+EXPORT_SYMBOL_GPL(rdev_get_id);
+
+static int __init regulator_init(void)
+{
+        printk(KERN_INFO "regulator: core version %s\n", REGULATOR_VERSION);
+        return class_register(&regulator_class);
+}
+
+/* init early to allow our consumers to complete system booting */
+core_initcall(regulator_init);
diff --git a/drivers/regulator/fixed.c b/drivers/regulator/fixed.c
new file mode 100644
index 000000000000..d31db3e14913
--- /dev/null
+++ b/drivers/regulator/fixed.c
@@ -0,0 +1,129 @@
+/*
+ * fixed.c
+ *
+ * Copyright 2008 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This is useful for systems with mixed controllable and
+ * non-controllable regulators, as well as for allowing testing on
+ * systems with no controllable regulators.
+ */
+
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/fixed.h>
+
+struct fixed_voltage_data {
+        struct regulator_desc desc;
+        struct regulator_dev *dev;
+        int microvolts;
+};
+
+static int fixed_voltage_is_enabled(struct regulator_dev *dev)
+{
+        return 1;
+}
+
+static int fixed_voltage_enable(struct regulator_dev *dev)
+{
+        return 0;
+}
+
+static int fixed_voltage_get_voltage(struct regulator_dev *dev)
+{
+        struct fixed_voltage_data *data = rdev_get_drvdata(dev);
+
+        return data->microvolts;
+}
+
+static struct regulator_ops fixed_voltage_ops = {
+        .is_enabled = fixed_voltage_is_enabled,
+        .enable = fixed_voltage_enable,
+        .get_voltage = fixed_voltage_get_voltage,
+};
+
+static int regulator_fixed_voltage_probe(struct platform_device *pdev)
+{
+        struct fixed_voltage_config *config = pdev->dev.platform_data;
+        struct fixed_voltage_data *drvdata;
+        int ret;
+
+        drvdata = kzalloc(sizeof(struct fixed_voltage_data), GFP_KERNEL);
+        if (drvdata == NULL) {
+                ret = -ENOMEM;
+                goto err;
+        }
+
+        drvdata->desc.name = kstrdup(config->supply_name, GFP_KERNEL);
+        if (drvdata->desc.name == NULL) {
+                ret = -ENOMEM;
+                goto err;
+        }
+        drvdata->desc.type = REGULATOR_VOLTAGE;
+        drvdata->desc.owner = THIS_MODULE;
+        drvdata->desc.ops = &fixed_voltage_ops,
+
+        drvdata->microvolts = config->microvolts;
+
+        drvdata->dev = regulator_register(&drvdata->desc, drvdata);
+        if (IS_ERR(drvdata->dev)) {
+                ret = PTR_ERR(drvdata->dev);
+                goto err_name;
+        }
+
+        platform_set_drvdata(pdev, drvdata);
+
+        dev_dbg(&pdev->dev, "%s supplying %duV\n", drvdata->desc.name,
+                drvdata->microvolts);
+
+        return 0;
+
+err_name:
+        kfree(drvdata->desc.name);
+err:
+        kfree(drvdata);
+        return ret;
+}
+
+static int regulator_fixed_voltage_remove(struct platform_device *pdev)
+{
+        struct fixed_voltage_data *drvdata = platform_get_drvdata(pdev);
+
+        regulator_unregister(drvdata->dev);
+        kfree(drvdata->desc.name);
+        kfree(drvdata);
+
+        return 0;
+}
+
+static struct platform_driver regulator_fixed_voltage_driver = {
+        .probe          = regulator_fixed_voltage_probe,
+        .remove         = regulator_fixed_voltage_remove,
+        .driver         = {
+                .name           = "reg-fixed-voltage",
+        },
+};
+
+static int __init regulator_fixed_voltage_init(void)
+{
+        return platform_driver_register(&regulator_fixed_voltage_driver);
+}
+module_init(regulator_fixed_voltage_init);
+
+static void __exit regulator_fixed_voltage_exit(void)
+{
+        platform_driver_unregister(&regulator_fixed_voltage_driver);
+}
+module_exit(regulator_fixed_voltage_exit);
+
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_DESCRIPTION("Fixed voltage regulator");
+MODULE_LICENSE("GPL");
diff --git a/drivers/regulator/virtual.c b/drivers/regulator/virtual.c
new file mode 100644
index 000000000000..5ddb464b1c3f
--- /dev/null
+++ b/drivers/regulator/virtual.c
@@ -0,0 +1,345 @@
+/*
+ * reg-virtual-consumer.c
+ *
+ * Copyright 2008 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ */
+
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+
+struct virtual_consumer_data {
+        struct mutex lock;
+        struct regulator *regulator;
+        int enabled;
+        int min_uV;
+        int max_uV;
+        int min_uA;
+        int max_uA;
+        unsigned int mode;
+};
+
+static void update_voltage_constraints(struct virtual_consumer_data *data)
+{
+        int ret;
+
+        if (data->min_uV && data->max_uV
+            && data->min_uV <= data->max_uV) {
+                ret = regulator_set_voltage(data->regulator,
+                                            data->min_uV, data->max_uV);
+                if (ret != 0) {
+                        printk(KERN_ERR "regulator_set_voltage() failed: %d\n",
+                               ret);
+                        return;
+                }
+        }
+
+        if (data->min_uV && data->max_uV && !data->enabled) {
+                ret = regulator_enable(data->regulator);
+                if (ret == 0)
+                        data->enabled = 1;
+                else
+                        printk(KERN_ERR "regulator_enable() failed: %d\n",
+                                ret);
+        }
+
+        if (!(data->min_uV && data->max_uV) && data->enabled) {
+                ret = regulator_disable(data->regulator);
+                if (ret == 0)
+                        data->enabled = 0;
+                else
+                        printk(KERN_ERR "regulator_disable() failed: %d\n",
+                                ret);
+        }
+}
+
+static void update_current_limit_constraints(struct virtual_consumer_data
+                                                *data)
+{
+        int ret;
+
+        if (data->max_uA
+            && data->min_uA <= data->max_uA) {
+                ret = regulator_set_current_limit(data->regulator,
+                                        data->min_uA, data->max_uA);
+                if (ret != 0) {
+                        pr_err("regulator_set_current_limit() failed: %d\n",
+                               ret);
+                        return;
+                }
+        }
+
+        if (data->max_uA && !data->enabled) {
+                ret = regulator_enable(data->regulator);
+                if (ret == 0)
+                        data->enabled = 1;
+                else
+                        printk(KERN_ERR "regulator_enable() failed: %d\n",
+                                ret);
+        }
+
+        if (!(data->min_uA && data->max_uA) && data->enabled) {
+                ret = regulator_disable(data->regulator);
+                if (ret == 0)
+                        data->enabled = 0;
+                else
+                        printk(KERN_ERR "regulator_disable() failed: %d\n",
+                                ret);
+        }
+}
+
+static ssize_t show_min_uV(struct device *dev,
+                           struct device_attribute *attr, char *buf)
+{
+        struct virtual_consumer_data *data = dev_get_drvdata(dev);
+        return sprintf(buf, "%d\n", data->min_uV);
+}
+
+static ssize_t set_min_uV(struct device *dev, struct device_attribute *attr,
+                          const char *buf, size_t count)
+{
+        struct virtual_consumer_data *data = dev_get_drvdata(dev);
+        long val;
+
+        if (strict_strtol(buf, 10, &val) != 0)
+                return count;
+
+        mutex_lock(&data->lock);
+
+        data->min_uV = val;
+        update_voltage_constraints(data);
+
+        mutex_unlock(&data->lock);
+
+        return count;
+}
+
+static ssize_t show_max_uV(struct device *dev,
+                           struct device_attribute *attr, char *buf)
+{
+        struct virtual_consumer_data *data = dev_get_drvdata(dev);
+        return sprintf(buf, "%d\n", data->max_uV);
+}
+
+static ssize_t set_max_uV(struct device *dev, struct device_attribute *attr,
+                          const char *buf, size_t count)
+{
+        struct virtual_consumer_data *data = dev_get_drvdata(dev);
+        long val;
+
+        if (strict_strtol(buf, 10, &val) != 0)
+                return count;
+
+        mutex_lock(&data->lock);
+
+        data->max_uV = val;
+        update_voltage_constraints(data);
+
+        mutex_unlock(&data->lock);
+
+        return count;
+}
+
+static ssize_t show_min_uA(struct device *dev,
+                           struct device_attribute *attr, char *buf)
+{
+        struct virtual_consumer_data *data = dev_get_drvdata(dev);
+        return sprintf(buf, "%d\n", data->min_uA);
+}
+
+static ssize_t set_min_uA(struct device *dev, struct device_attribute *attr,
+                          const char *buf, size_t count)
+{
+        struct virtual_consumer_data *data = dev_get_drvdata(dev);
+        long val;
+
+        if (strict_strtol(buf, 10, &val) != 0)
+                return count;
+
+        mutex_lock(&data->lock);
+
+        data->min_uA = val;
+        update_current_limit_constraints(data);
+
+        mutex_unlock(&data->lock);
+
+        return count;
+}
+
+static ssize_t show_max_uA(struct device *dev,
+                           struct device_attribute *attr, char *buf)
+{
+        struct virtual_consumer_data *data = dev_get_drvdata(dev);
+        return sprintf(buf, "%d\n", data->max_uA);
+}
+
+static ssize_t set_max_uA(struct device *dev, struct device_attribute *attr,
+                          const char *buf, size_t count)
+{
+        struct virtual_consumer_data *data = dev_get_drvdata(dev);
+        long val;
+
+        if (strict_strtol(buf, 10, &val) != 0)
+                return count;
+
+        mutex_lock(&data->lock);
+
+        data->max_uA = val;
+        update_current_limit_constraints(data);
+
+        mutex_unlock(&data->lock);
+
+        return count;
+}
+
+static ssize_t show_mode(struct device *dev,
+                         struct device_attribute *attr, char *buf)
+{
+        struct virtual_consumer_data *data = dev_get_drvdata(dev);
+
+        switch (data->mode) {
+        case REGULATOR_MODE_FAST:
+                return sprintf(buf, "fast\n");
+        case REGULATOR_MODE_NORMAL:
+                return sprintf(buf, "normal\n");
+        case REGULATOR_MODE_IDLE:
+                return sprintf(buf, "idle\n");
+        case REGULATOR_MODE_STANDBY:
+                return sprintf(buf, "standby\n");
+        default:
+                return sprintf(buf, "unknown\n");
+        }
+}
+
+static ssize_t set_mode(struct device *dev, struct device_attribute *attr,
+                        const char *buf, size_t count)
+{
+        struct virtual_consumer_data *data = dev_get_drvdata(dev);
+        unsigned int mode;
+        int ret;
+
+        if (strncmp(buf, "fast", strlen("fast")) == 0)
+                mode = REGULATOR_MODE_FAST;
+        else if (strncmp(buf, "normal", strlen("normal")) == 0)
+                mode = REGULATOR_MODE_NORMAL;
+        else if (strncmp(buf, "idle", strlen("idle")) == 0)
+                mode = REGULATOR_MODE_IDLE;
+        else if (strncmp(buf, "standby", strlen("standby")) == 0)
+                mode = REGULATOR_MODE_STANDBY;
+        else {
+                dev_err(dev, "Configuring invalid mode\n");
+                return count;
+        }
+
+        mutex_lock(&data->lock);
+        ret = regulator_set_mode(data->regulator, mode);
+        if (ret == 0)
+                data->mode = mode;
+        else
+                dev_err(dev, "Failed to configure mode: %d\n", ret);
+        mutex_unlock(&data->lock);
+
+        return count;
+}
+
+static DEVICE_ATTR(min_microvolts, 0666, show_min_uV, set_min_uV);
+static DEVICE_ATTR(max_microvolts, 0666, show_max_uV, set_max_uV);
+static DEVICE_ATTR(min_microamps, 0666, show_min_uA, set_min_uA);
+static DEVICE_ATTR(max_microamps, 0666, show_max_uA, set_max_uA);
+static DEVICE_ATTR(mode, 0666, show_mode, set_mode);
+
+struct device_attribute *attributes[] = {
+        &dev_attr_min_microvolts,
+        &dev_attr_max_microvolts,
+        &dev_attr_min_microamps,
+        &dev_attr_max_microamps,
+        &dev_attr_mode,
+};
+
+static int regulator_virtual_consumer_probe(struct platform_device *pdev)
+{
+        char *reg_id = pdev->dev.platform_data;
+        struct virtual_consumer_data *drvdata;
+        int ret, i;
+
+        drvdata = kzalloc(sizeof(struct virtual_consumer_data), GFP_KERNEL);
+        if (drvdata == NULL) {
+                ret = -ENOMEM;
+                goto err;
+        }
+
+        mutex_init(&drvdata->lock);
+
+        drvdata->regulator = regulator_get(&pdev->dev, reg_id);
+        if (IS_ERR(drvdata->regulator)) {
+                ret = PTR_ERR(drvdata->regulator);
+                goto err;
+        }
+
+        for (i = 0; i < ARRAY_SIZE(attributes); i++) {
+                ret = device_create_file(&pdev->dev, attributes[i]);
+                if (ret != 0)
+                        goto err;
+        }
+
+        drvdata->mode = regulator_get_mode(drvdata->regulator);
+
+        platform_set_drvdata(pdev, drvdata);
+
+        return 0;
+
+err:
+        for (i = 0; i < ARRAY_SIZE(attributes); i++)
+                device_remove_file(&pdev->dev, attributes[i]);
+        kfree(drvdata);
+        return ret;
+}
+
+static int regulator_virtual_consumer_remove(struct platform_device *pdev)
+{
+        struct virtual_consumer_data *drvdata = platform_get_drvdata(pdev);
+        int i;
+
+        for (i = 0; i < ARRAY_SIZE(attributes); i++)
+                device_remove_file(&pdev->dev, attributes[i]);
+        if (drvdata->enabled)
+                regulator_disable(drvdata->regulator);
+        regulator_put(drvdata->regulator);
+
+        kfree(drvdata);
+
+        return 0;
+}
+
+static struct platform_driver regulator_virtual_consumer_driver = {
+        .probe          = regulator_virtual_consumer_probe,
+        .remove         = regulator_virtual_consumer_remove,
+        .driver         = {
+                .name           = "reg-virt-consumer",
+        },
+};
+
+
+static int __init regulator_virtual_consumer_init(void)
+{
+        return platform_driver_register(&regulator_virtual_consumer_driver);
+}
+module_init(regulator_virtual_consumer_init);
+
+static void __exit regulator_virtual_consumer_exit(void)
+{
+        platform_driver_unregister(&regulator_virtual_consumer_driver);
+}
+module_exit(regulator_virtual_consumer_exit);
+
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_DESCRIPTION("Virtual regulator consumer");
+MODULE_LICENSE("GPL");
diff --git a/drivers/rtc/interface.c b/drivers/rtc/interface.c
index d397fa5f3a91..7af60b98d8a4 100644
--- a/drivers/rtc/interface.c
+++ b/drivers/rtc/interface.c
@@ -20,7 +20,7 @@ int rtc_read_time(struct rtc_device *rtc, struct rtc_time *tm)
 
         err = mutex_lock_interruptible(&rtc->ops_lock);
         if (err)
-                return -EBUSY;
+                return err;
 
         if (!rtc->ops)
                 err = -ENODEV;
@@ -46,7 +46,7 @@ int rtc_set_time(struct rtc_device *rtc, struct rtc_time *tm)
 
         err = mutex_lock_interruptible(&rtc->ops_lock);
         if (err)
-                return -EBUSY;
+                return err;
 
         if (!rtc->ops)
                 err = -ENODEV;
@@ -66,7 +66,7 @@ int rtc_set_mmss(struct rtc_device *rtc, unsigned long secs)
 
         err = mutex_lock_interruptible(&rtc->ops_lock);
         if (err)
-                return -EBUSY;
+                return err;
 
         if (!rtc->ops)
                 err = -ENODEV;
@@ -106,7 +106,7 @@ static int rtc_read_alarm_internal(struct rtc_device *rtc, struct rtc_wkalrm *al
 
         err = mutex_lock_interruptible(&rtc->ops_lock);
         if (err)
-                return -EBUSY;
+                return err;
 
         if (rtc->ops == NULL)
                 err = -ENODEV;
@@ -293,7 +293,7 @@ int rtc_set_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm)
 
         err = mutex_lock_interruptible(&rtc->ops_lock);
         if (err)
-                return -EBUSY;
+                return err;
 
         if (!rtc->ops)
                 err = -ENODEV;
diff --git a/drivers/rtc/rtc-dev.c b/drivers/rtc/rtc-dev.c
index 0a870b7e5c32..856cc1af40df 100644
--- a/drivers/rtc/rtc-dev.c
+++ b/drivers/rtc/rtc-dev.c
@@ -221,7 +221,7 @@ static long rtc_dev_ioctl(struct file *file,
 
         err = mutex_lock_interruptible(&rtc->ops_lock);
         if (err)
-                return -EBUSY;
+                return err;
 
         /* check that the calling task has appropriate permissions
          * for certain ioctls. doing this check here is useful
@@ -432,6 +432,8 @@ static int rtc_dev_release(struct inode *inode, struct file *file)
 #ifdef CONFIG_RTC_INTF_DEV_UIE_EMUL
         clear_uie(rtc);
 #endif
+        rtc_irq_set_state(rtc, NULL, 0);
+
         if (rtc->ops->release)
                 rtc->ops->release(rtc->dev.parent);
 
diff --git a/drivers/s390/block/dasd_alias.c b/drivers/s390/block/dasd_alias.c
index 2d8df0b30538..20676cdef4a5 100644
--- a/drivers/s390/block/dasd_alias.c
+++ b/drivers/s390/block/dasd_alias.c
@@ -91,7 +91,8 @@ static struct alias_pav_group *_find_group(struct alias_lcu *lcu,
         else
                 search_unit_addr = uid->base_unit_addr;
         list_for_each_entry(pos, &lcu->grouplist, group) {
-                if (pos->uid.base_unit_addr == search_unit_addr)
+                if (pos->uid.base_unit_addr == search_unit_addr &&
+                    !strncmp(pos->uid.vduit, uid->vduit, sizeof(uid->vduit)))
                         return pos;
         };
         return NULL;
@@ -332,6 +333,7 @@ static int _add_device_to_lcu(struct alias_lcu *lcu,
                         group->uid.base_unit_addr = uid->real_unit_addr;
                 else
                         group->uid.base_unit_addr = uid->base_unit_addr;
+                memcpy(group->uid.vduit, uid->vduit, sizeof(uid->vduit));
                 INIT_LIST_HEAD(&group->group);
                 INIT_LIST_HEAD(&group->baselist);
                 INIT_LIST_HEAD(&group->aliaslist);
diff --git a/drivers/s390/block/dasd_devmap.c b/drivers/s390/block/dasd_devmap.c
index d774e79476fe..cd3335c1c307 100644
--- a/drivers/s390/block/dasd_devmap.c
+++ b/drivers/s390/block/dasd_devmap.c
@@ -913,7 +913,8 @@ dasd_vendor_show(struct device *dev, struct device_attribute *attr, char *buf)
 static DEVICE_ATTR(vendor, 0444, dasd_vendor_show, NULL);
 
 #define UID_STRLEN ( /* vendor */ 3 + 1 + /* serial    */ 14 + 1 +\
-                     /* SSID   */ 4 + 1 + /* unit addr */ 2 + 1)
+                     /* SSID   */ 4 + 1 + /* unit addr */ 2 + 1 +\
+                     /* vduit */ 32 + 1)
 
 static ssize_t
 dasd_uid_show(struct device *dev, struct device_attribute *attr, char *buf)
@@ -945,8 +946,17 @@ dasd_uid_show(struct device *dev, struct device_attribute *attr, char *buf)
                 sprintf(ua_string, "%02x", uid->real_unit_addr);
                 break;
         }
-        snprintf(uid_string, sizeof(uid_string), "%s.%s.%04x.%s",
-                 uid->vendor, uid->serial, uid->ssid, ua_string);
+        if (strlen(uid->vduit) > 0)
+                snprintf(uid_string, sizeof(uid_string),
+                         "%s.%s.%04x.%s.%s",
+                         uid->vendor, uid->serial,
+                         uid->ssid, ua_string,
+                         uid->vduit);
+        else
+                snprintf(uid_string, sizeof(uid_string),
+                         "%s.%s.%04x.%s",
+                         uid->vendor, uid->serial,
+                         uid->ssid, ua_string);
         spin_unlock(&dasd_devmap_lock);
         return snprintf(buf, PAGE_SIZE, "%s\n", uid_string);
 }
diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c
index 3590fdb5b2fd..773b3fe275b2 100644
--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -313,8 +313,8 @@ static int prefix(struct ccw1 *ccw, struct PFX_eckd_data *pfxdata, int trk,
         memset(pfxdata, 0, sizeof(*pfxdata));
         /* prefix data */
         pfxdata->format = 0;
-        pfxdata->base_address = basepriv->conf_data.ned1.unit_addr;
-        pfxdata->base_lss = basepriv->conf_data.ned1.ID;
+        pfxdata->base_address = basepriv->ned->unit_addr;
+        pfxdata->base_lss = basepriv->ned->ID;
         pfxdata->validity.define_extend = 1;
 
         /* private uid is kept up to date, conf_data may be outdated */
@@ -536,36 +536,40 @@ dasd_eckd_cdl_reclen(int recid)
 /*
  * Generate device unique id that specifies the physical device.
  */
-static int
-dasd_eckd_generate_uid(struct dasd_device *device, struct dasd_uid *uid)
+static int dasd_eckd_generate_uid(struct dasd_device *device,
+                                  struct dasd_uid *uid)
 {
         struct dasd_eckd_private *private;
-        struct dasd_eckd_confdata *confdata;
+        int count;
 
         private = (struct dasd_eckd_private *) device->private;
         if (!private)
                 return -ENODEV;
-        confdata = &private->conf_data;
-        if (!confdata)
+        if (!private->ned || !private->gneq)
                 return -ENODEV;
 
         memset(uid, 0, sizeof(struct dasd_uid));
-        memcpy(uid->vendor, confdata->ned1.HDA_manufacturer,
+        memcpy(uid->vendor, private->ned->HDA_manufacturer,
                sizeof(uid->vendor) - 1);
         EBCASC(uid->vendor, sizeof(uid->vendor) - 1);
-        memcpy(uid->serial, confdata->ned1.HDA_location,
+        memcpy(uid->serial, private->ned->HDA_location,
                sizeof(uid->serial) - 1);
         EBCASC(uid->serial, sizeof(uid->serial) - 1);
-        uid->ssid = confdata->neq.subsystemID;
-        uid->real_unit_addr = confdata->ned1.unit_addr;
-        if (confdata->ned2.sneq.flags == 0x40 &&
-            confdata->ned2.sneq.format == 0x0001) {
-                uid->type = confdata->ned2.sneq.sua_flags;
+        uid->ssid = private->gneq->subsystemID;
+        uid->real_unit_addr = private->ned->unit_addr;;
+        if (private->sneq) {
+                uid->type = private->sneq->sua_flags;
                 if (uid->type == UA_BASE_PAV_ALIAS)
-                        uid->base_unit_addr = confdata->ned2.sneq.base_unit_addr;
+                        uid->base_unit_addr = private->sneq->base_unit_addr;
         } else {
                 uid->type = UA_BASE_DEVICE;
         }
+        if (private->vdsneq) {
+                for (count = 0; count < 16; count++) {
+                        sprintf(uid->vduit+2*count, "%02x",
+                                private->vdsneq->uit[count]);
+                }
+        }
         return 0;
 }
 
@@ -623,6 +627,15 @@ static int dasd_eckd_read_conf_lpm(struct dasd_device *device,
                 ret = -ENOMEM;
                 goto out_error;
         }
+
+        /*
+         * buffer has to start with EBCDIC "V1.0" to show
+         * support for virtual device SNEQ
+         */
+        rcd_buf[0] = 0xE5;
+        rcd_buf[1] = 0xF1;
+        rcd_buf[2] = 0x4B;
+        rcd_buf[3] = 0xF0;
         cqr = dasd_eckd_build_rcd_lpm(device, rcd_buf, ciw, lpm);
         if (IS_ERR(cqr)) {
                 ret =  PTR_ERR(cqr);
@@ -646,8 +659,62 @@ out_error:
         return ret;
 }
 
-static int
-dasd_eckd_read_conf(struct dasd_device *device)
+static int dasd_eckd_identify_conf_parts(struct dasd_eckd_private *private)
+{
+
+        struct dasd_sneq *sneq;
+        int i, count;
+
+        private->ned = NULL;
+        private->sneq = NULL;
+        private->vdsneq = NULL;
+        private->gneq = NULL;
+        count = private->conf_len / sizeof(struct dasd_sneq);
+        sneq = (struct dasd_sneq *)private->conf_data;
+        for (i = 0; i < count; ++i) {
+                if (sneq->flags.identifier == 1 && sneq->format == 1)
+                        private->sneq = sneq;
+                else if (sneq->flags.identifier == 1 && sneq->format == 4)
+                        private->vdsneq = (struct vd_sneq *)sneq;
+                else if (sneq->flags.identifier == 2)
+                        private->gneq = (struct dasd_gneq *)sneq;
+                else if (sneq->flags.identifier == 3 && sneq->res1 == 1)
+                        private->ned = (struct dasd_ned *)sneq;
+                sneq++;
+        }
+        if (!private->ned || !private->gneq) {
+                private->ned = NULL;
+                private->sneq = NULL;
+                private->vdsneq = NULL;
+                private->gneq = NULL;
+                return -EINVAL;
+        }
+        return 0;
+
+};
+
+static unsigned char dasd_eckd_path_access(void *conf_data, int conf_len)
+{
+        struct dasd_gneq *gneq;
+        int i, count, found;
+
+        count = conf_len / sizeof(*gneq);
+        gneq = (struct dasd_gneq *)conf_data;
+        found = 0;
+        for (i = 0; i < count; ++i) {
+                if (gneq->flags.identifier == 2) {
+                        found = 1;
+                        break;
+                }
+                gneq++;
+        }
+        if (found)
+                return ((char *)gneq)[18] & 0x07;
+        else
+                return 0;
+}
+
+static int dasd_eckd_read_conf(struct dasd_device *device)
 {
         void *conf_data;
         int conf_len, conf_data_saved;
@@ -661,7 +728,6 @@ dasd_eckd_read_conf(struct dasd_device *device)
         path_data->opm = ccw_device_get_path_mask(device->cdev);
         lpm = 0x80;
         conf_data_saved = 0;
-
         /* get configuration data per operational path */
         for (lpm = 0x80; lpm; lpm>>= 1) {
                 if (lpm & path_data->opm){
@@ -678,22 +744,20 @@ dasd_eckd_read_conf(struct dasd_device *device)
                                         "data retrieved");
                                 continue;       /* no error */
                         }
-                        if (conf_len != sizeof(struct dasd_eckd_confdata)) {
-                                MESSAGE(KERN_WARNING,
-                                        "sizes of configuration data mismatch"
-                                        "%d (read) vs %ld (expected)",
-                                        conf_len,
-                                        sizeof(struct dasd_eckd_confdata));
-                                kfree(conf_data);
-                                continue;       /* no error */
-                        }
                         /* save first valid configuration data */
-                        if (!conf_data_saved){
-                                memcpy(&private->conf_data, conf_data,
-                                       sizeof(struct dasd_eckd_confdata));
+                        if (!conf_data_saved) {
+                                kfree(private->conf_data);
+                                private->conf_data = conf_data;
+                                private->conf_len = conf_len;
+                                if (dasd_eckd_identify_conf_parts(private)) {
+                                        private->conf_data = NULL;
+                                        private->conf_len = 0;
+                                        kfree(conf_data);
+                                        continue;
+                                }
                                 conf_data_saved++;
                         }
-                        switch (((char *)conf_data)[242] & 0x07){
+                        switch (dasd_eckd_path_access(conf_data, conf_len)) {
                         case 0x02:
                                 path_data->npm |= lpm;
                                 break;
@@ -701,7 +765,8 @@ dasd_eckd_read_conf(struct dasd_device *device)
                                 path_data->ppm |= lpm;
                                 break;
                         }
-                        kfree(conf_data);
+                        if (conf_data != private->conf_data)
+                                kfree(conf_data);
                 }
         }
         return 0;
@@ -952,6 +1017,7 @@ out_err2:
         dasd_free_block(device->block);
         device->block = NULL;
 out_err1:
+        kfree(private->conf_data);
         kfree(device->private);
         device->private = NULL;
         return rc;
@@ -959,7 +1025,17 @@ out_err1:
 
 static void dasd_eckd_uncheck_device(struct dasd_device *device)
 {
+        struct dasd_eckd_private *private;
+
+        private = (struct dasd_eckd_private *) device->private;
         dasd_alias_disconnect_device_from_lcu(device);
+        private->ned = NULL;
+        private->sneq = NULL;
+        private->vdsneq = NULL;
+        private->gneq = NULL;
+        private->conf_len = 0;
+        kfree(private->conf_data);
+        private->conf_data = NULL;
 }
 
 static struct dasd_ccw_req *
@@ -1746,9 +1822,10 @@ dasd_eckd_fill_info(struct dasd_device * device,
         info->characteristics_size = sizeof(struct dasd_eckd_characteristics);
         memcpy(info->characteristics, &private->rdc_data,
                sizeof(struct dasd_eckd_characteristics));
-        info->confdata_size = sizeof(struct dasd_eckd_confdata);
-        memcpy(info->configuration_data, &private->conf_data,
-               sizeof(struct dasd_eckd_confdata));
+        info->confdata_size = min((unsigned long)private->conf_len,
+                                  sizeof(info->configuration_data));
+        memcpy(info->configuration_data, private->conf_data,
+               info->confdata_size);
         return 0;
 }
 
diff --git a/drivers/s390/block/dasd_eckd.h b/drivers/s390/block/dasd_eckd.h
index fc2509c939bc..4bf0aa5112c1 100644
--- a/drivers/s390/block/dasd_eckd.h
+++ b/drivers/s390/block/dasd_eckd.h
@@ -231,133 +231,62 @@ struct dasd_eckd_characteristics {
         __u8 reserved3[10];
 } __attribute__ ((packed));
 
-struct dasd_eckd_confdata {
+/* elements of the configuration data */
+struct dasd_ned {
         struct {
-                struct {
-                        unsigned char identifier:2;
-                        unsigned char token_id:1;
-                        unsigned char sno_valid:1;
-                        unsigned char subst_sno:1;
-                        unsigned char recNED:1;
-                        unsigned char emuNED:1;
-                        unsigned char reserved:1;
-                } __attribute__ ((packed)) flags;
-                __u8 descriptor;
-                __u8 dev_class;
-                __u8 reserved;
-                unsigned char dev_type[6];
-                unsigned char dev_model[3];
-                unsigned char HDA_manufacturer[3];
-                unsigned char HDA_location[2];
-                unsigned char HDA_seqno[12];
-                __u8 ID;
-                __u8 unit_addr;
-        } __attribute__ ((packed)) ned1;
-        union {
-                struct {
-                        struct {
-                                unsigned char identifier:2;
-                                unsigned char token_id:1;
-                                unsigned char sno_valid:1;
-                                unsigned char subst_sno:1;
-                                unsigned char recNED:1;
-                                unsigned char emuNED:1;
-                                unsigned char reserved:1;
-                        } __attribute__ ((packed)) flags;
-                        __u8 descriptor;
-                        __u8 reserved[2];
-                        unsigned char dev_type[6];
-                        unsigned char dev_model[3];
-                        unsigned char DASD_manufacturer[3];
-                        unsigned char DASD_location[2];
-                        unsigned char DASD_seqno[12];
-                        __u16 ID;
-                } __attribute__ ((packed)) ned;
-                struct {
-                        unsigned char flags;            /* byte  0    */
-                        unsigned char res1;             /* byte  1    */
-                        __u16 format;                   /* byte  2-3  */
-                        unsigned char res2[4];          /* byte  4-7  */
-                        unsigned char sua_flags;        /* byte  8    */
-                        __u8 base_unit_addr;            /* byte  9    */
-                        unsigned char res3[22];         /* byte 10-31 */
-                } __attribute__ ((packed)) sneq;
-        } __attribute__ ((packed)) ned2;
+                __u8 identifier:2;
+                __u8 token_id:1;
+                __u8 sno_valid:1;
+                __u8 subst_sno:1;
+                __u8 recNED:1;
+                __u8 emuNED:1;
+                __u8 reserved:1;
+        } __attribute__ ((packed)) flags;
+        __u8 descriptor;
+        __u8 dev_class;
+        __u8 reserved;
+        __u8 dev_type[6];
+        __u8 dev_model[3];
+        __u8 HDA_manufacturer[3];
+        __u8 HDA_location[2];
+        __u8 HDA_seqno[12];
+        __u8 ID;
+        __u8 unit_addr;
+} __attribute__ ((packed));
+
+struct dasd_sneq {
         struct {
-                struct {
-                        unsigned char identifier:2;
-                        unsigned char token_id:1;
-                        unsigned char sno_valid:1;
-                        unsigned char subst_sno:1;
-                        unsigned char recNED:1;
-                        unsigned char emuNED:1;
-                        unsigned char reserved:1;
-                } __attribute__ ((packed)) flags;
-                __u8 descriptor;
-                __u8 reserved[2];
-                unsigned char cont_type[6];
-                unsigned char cont_model[3];
-                unsigned char cont_manufacturer[3];
-                unsigned char cont_location[2];
-                unsigned char cont_seqno[12];
-                __u16 ID;
-        } __attribute__ ((packed)) ned3;
+                __u8 identifier:2;
+                __u8 reserved:6;
+        } __attribute__ ((packed)) flags;
+        __u8 res1;
+        __u16 format;
+        __u8 res2[4];           /* byte  4- 7 */
+        __u8 sua_flags;         /* byte  8    */
+        __u8 base_unit_addr;    /* byte  9    */
+        __u8 res3[22];          /* byte 10-31 */
+} __attribute__ ((packed));
+
+struct vd_sneq {
         struct {
-                struct {
-                        unsigned char identifier:2;
-                        unsigned char token_id:1;
-                        unsigned char sno_valid:1;
-                        unsigned char subst_sno:1;
-                        unsigned char recNED:1;
-                        unsigned char emuNED:1;
-                        unsigned char reserved:1;
-                } __attribute__ ((packed)) flags;
-                __u8 descriptor;
-                __u8 reserved[2];
-                unsigned char cont_type[6];
-                unsigned char empty[3];
-                unsigned char cont_manufacturer[3];
-                unsigned char cont_location[2];
-                unsigned char cont_seqno[12];
-                __u16 ID;
-        } __attribute__ ((packed)) ned4;
-        unsigned char ned5[32];
-        unsigned char ned6[32];
-        unsigned char ned7[32];
+                __u8 identifier:2;
+                __u8 reserved:6;
+        } __attribute__ ((packed)) flags;
+        __u8 res1;
+        __u16 format;
+        __u8 res2[4];   /* byte  4- 7 */
+        __u8 uit[16];   /* byte  8-23 */
+        __u8 res3[8];   /* byte 24-31 */
+} __attribute__ ((packed));
+
+struct dasd_gneq {
         struct {
-                struct {
-                        unsigned char identifier:2;
-                        unsigned char reserved:6;
-                } __attribute__ ((packed)) flags;
-                __u8 selector;
-                __u16 interfaceID;
-                __u32 reserved;
-                __u16 subsystemID;
-                struct {
-                        unsigned char sp0:1;
-                        unsigned char sp1:1;
-                        unsigned char reserved:5;
-                        unsigned char scluster:1;
-                } __attribute__ ((packed)) spathID;
-                __u8 unit_address;
-                __u8 dev_ID;
-                __u8 dev_address;
-                __u8 adapterID;
-                __u16 link_address;
-                struct {
-                        unsigned char parallel:1;
-                        unsigned char escon:1;
-                        unsigned char reserved:1;
-                        unsigned char ficon:1;
-                        unsigned char reserved2:4;
-                } __attribute__ ((packed)) protocol_type;
-                struct {
-                        unsigned char PID_in_236:1;
-                        unsigned char reserved:7;
-                } __attribute__ ((packed)) format_flags;
-                __u8 log_dev_address;
-                unsigned char reserved2[12];
-        } __attribute__ ((packed)) neq;
+                __u8 identifier:2;
+                __u8 reserved:6;
+        } __attribute__ ((packed)) flags;
+        __u8 reserved[7];
+        __u16 subsystemID;
+        __u8 reserved2[22];
 } __attribute__ ((packed));
 
 struct dasd_eckd_path {
@@ -463,7 +392,14 @@ struct alias_pav_group {
 
 struct dasd_eckd_private {
         struct dasd_eckd_characteristics rdc_data;
-        struct dasd_eckd_confdata conf_data;
+        u8 *conf_data;
+        int conf_len;
+        /* pointers to specific parts in the conf_data */
+        struct dasd_ned *ned;
+        struct dasd_sneq *sneq;
+        struct vd_sneq *vdsneq;
+        struct dasd_gneq *gneq;
+
         struct dasd_eckd_path path_data;
         struct eckd_count count_area[5];
         int init_cqr_status;
diff --git a/drivers/s390/block/dasd_int.h b/drivers/s390/block/dasd_int.h
index fb2f931cf844..31ecaa4a40e4 100644
--- a/drivers/s390/block/dasd_int.h
+++ b/drivers/s390/block/dasd_int.h
@@ -307,6 +307,7 @@ struct dasd_uid {
         __u16 ssid;
         __u8 real_unit_addr;
         __u8 base_unit_addr;
+        char vduit[33];
 };
 
 /*
diff --git a/drivers/s390/char/sclp.c b/drivers/s390/char/sclp.c
index 3c8b25e6c345..1fd8f2193ed8 100644
--- a/drivers/s390/char/sclp.c
+++ b/drivers/s390/char/sclp.c
@@ -399,6 +399,7 @@ sclp_tod_from_jiffies(unsigned long jiffies)
 void
 sclp_sync_wait(void)
 {
+        unsigned long long old_tick;
         unsigned long flags;
         unsigned long cr0, cr0_sync;
         u64 timeout;
@@ -419,11 +420,12 @@ sclp_sync_wait(void)
         if (!irq_context)
                 local_bh_disable();
         /* Enable service-signal interruption, disable timer interrupts */
+        old_tick = local_tick_disable();
         trace_hardirqs_on();
         __ctl_store(cr0, 0, 0);
         cr0_sync = cr0;
+        cr0_sync &= 0xffff00a0;
         cr0_sync |= 0x00000200;
-        cr0_sync &= 0xFFFFF3AC;
         __ctl_load(cr0_sync, 0, 0);
         __raw_local_irq_stosm(0x01);
         /* Loop until driver state indicates finished request */
@@ -439,9 +441,9 @@ sclp_sync_wait(void)
         __ctl_load(cr0, 0, 0);
         if (!irq_context)
                 _local_bh_enable();
+        local_tick_enable(old_tick);
         local_irq_restore(flags);
 }
-
 EXPORT_SYMBOL(sclp_sync_wait);
 
 /* Dispatch changes in send and receive mask to registered listeners. */
diff --git a/drivers/s390/char/sclp_cmd.c b/drivers/s390/char/sclp_cmd.c
index 0c2b77493db4..eb5f1b8bc57f 100644
--- a/drivers/s390/char/sclp_cmd.c
+++ b/drivers/s390/char/sclp_cmd.c
@@ -427,6 +427,8 @@ static int sclp_mem_notifier(struct notifier_block *nb,
                         sclp_attach_storage(id);
         switch (action) {
         case MEM_ONLINE:
+        case MEM_GOING_OFFLINE:
+        case MEM_CANCEL_OFFLINE:
                 break;
         case MEM_GOING_ONLINE:
                 rc = sclp_mem_change_state(start, size, 1);
@@ -434,6 +436,9 @@ static int sclp_mem_notifier(struct notifier_block *nb,
         case MEM_CANCEL_ONLINE:
                 sclp_mem_change_state(start, size, 0);
                 break;
+        case MEM_OFFLINE:
+                sclp_mem_change_state(start, size, 0);
+                break;
         default:
                 rc = -EINVAL;
                 break;
diff --git a/drivers/s390/char/sclp_config.c b/drivers/s390/char/sclp_config.c
index fff4ff485d9b..4cebd6ee6d27 100644
--- a/drivers/s390/char/sclp_config.c
+++ b/drivers/s390/char/sclp_config.c
@@ -8,7 +8,6 @@
 #include <linux/init.h>
 #include <linux/errno.h>
 #include <linux/cpu.h>
-#include <linux/kthread.h>
 #include <linux/sysdev.h>
 #include <linux/workqueue.h>
 #include <asm/smp.h>
@@ -41,19 +40,9 @@ static void sclp_cpu_capability_notify(struct work_struct *work)
         put_online_cpus();
 }
 
-static int sclp_cpu_kthread(void *data)
-{
-        smp_rescan_cpus();
-        return 0;
-}
-
 static void __ref sclp_cpu_change_notify(struct work_struct *work)
 {
-        /* Can't call smp_rescan_cpus() from  workqueue context since it may
-         * deadlock in case of cpu hotplug. So we have to create a kernel
-         * thread in order to call it.
-         */
-        kthread_run(sclp_cpu_kthread, NULL, "cpu_rescan");
+        smp_rescan_cpus();
 }
 
 static void sclp_conf_receiver_fn(struct evbuf_header *evbuf)
diff --git a/drivers/s390/cio/idset.c b/drivers/s390/cio/idset.c
index ef7bc0a125ef..cf8f24a4b5eb 100644
--- a/drivers/s390/cio/idset.c
+++ b/drivers/s390/cio/idset.c
@@ -5,7 +5,7 @@
  *    Author(s): Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
  */
 
-#include <linux/slab.h>
+#include <linux/vmalloc.h>
 #include <linux/bitops.h>
 #include "idset.h"
 #include "css.h"
@@ -25,18 +25,18 @@ static struct idset *idset_new(int num_ssid, int num_id)
 {
         struct idset *set;
 
-        set = kzalloc(sizeof(struct idset) + bitmap_size(num_ssid, num_id),
-                      GFP_KERNEL);
+        set = vmalloc(sizeof(struct idset) + bitmap_size(num_ssid, num_id));
         if (set) {
                 set->num_ssid = num_ssid;
                 set->num_id = num_id;
+                memset(set->bitmap, 0, bitmap_size(num_ssid, num_id));
         }
         return set;
 }
 
 void idset_free(struct idset *set)
 {
-        kfree(set);
+        vfree(set);
 }
 
 void idset_clear(struct idset *set)
diff --git a/drivers/s390/cio/qdio_main.c b/drivers/s390/cio/qdio_main.c
index d10c73cc1688..d15648514a0f 100644
--- a/drivers/s390/cio/qdio_main.c
+++ b/drivers/s390/cio/qdio_main.c
@@ -1355,7 +1355,7 @@ int qdio_allocate(struct qdio_initialize *init_data)
                 goto out_rel;
 
         /* qdr is used in ccw1.cda which is u32 */
-        irq_ptr->qdr = kzalloc(sizeof(struct qdr), GFP_KERNEL | GFP_DMA);
+        irq_ptr->qdr = (struct qdr *) get_zeroed_page(GFP_KERNEL | GFP_DMA);
         if (!irq_ptr->qdr)
                 goto out_rel;
         WARN_ON((unsigned long)irq_ptr->qdr & 0xfff);
diff --git a/drivers/s390/cio/qdio_perf.c b/drivers/s390/cio/qdio_perf.c
index ea01b85b1cc9..ec5c4a414235 100644
--- a/drivers/s390/cio/qdio_perf.c
+++ b/drivers/s390/cio/qdio_perf.c
@@ -142,7 +142,7 @@ int __init qdio_setup_perf_stats(void)
         return 0;
 }
 
-void __exit qdio_remove_perf_stats(void)
+void qdio_remove_perf_stats(void)
 {
 #ifdef CONFIG_PROC_FS
         remove_proc_entry("qdio_perf", NULL);
diff --git a/drivers/s390/cio/qdio_setup.c b/drivers/s390/cio/qdio_setup.c
index f0923a8aceda..1bd2a208db28 100644
--- a/drivers/s390/cio/qdio_setup.c
+++ b/drivers/s390/cio/qdio_setup.c
@@ -325,7 +325,7 @@ void qdio_release_memory(struct qdio_irq *irq_ptr)
                         kmem_cache_free(qdio_q_cache, q);
                 }
         }
-        kfree(irq_ptr->qdr);
+        free_page((unsigned long) irq_ptr->qdr);
         free_page(irq_ptr->chsc_page);
         free_page((unsigned long) irq_ptr);
 }
@@ -515,7 +515,7 @@ int __init qdio_setup_init(void)
         return 0;
 }
 
-void __exit qdio_setup_exit(void)
+void qdio_setup_exit(void)
 {
         kmem_cache_destroy(qdio_q_cache);
 }
diff --git a/drivers/s390/kvm/kvm_virtio.c b/drivers/s390/kvm/kvm_virtio.c
index 79954bd6bfa5..292b60da6dc7 100644
--- a/drivers/s390/kvm/kvm_virtio.c
+++ b/drivers/s390/kvm/kvm_virtio.c
@@ -352,7 +352,7 @@ static __init int early_put_chars(u32 vtermno, const char *buf, int count)
         return len;
 }
 
-void s390_virtio_console_init(void)
+void __init s390_virtio_console_init(void)
 {
         virtio_cons_early_init(early_put_chars);
 }
diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h
index 1895dbb553cd..80971c21ea1a 100644
--- a/drivers/s390/net/qeth_core.h
+++ b/drivers/s390/net/qeth_core.h
@@ -419,6 +419,7 @@ struct qeth_qdio_out_buffer {
         int next_element_to_fill;
         struct sk_buff_head skb_list;
         struct list_head ctx_list;
+        int is_header[16];
 };
 
 struct qeth_card;
@@ -785,7 +786,7 @@ void qeth_core_remove_osn_attributes(struct device *);
 
 /* exports for qeth discipline device drivers */
 extern struct qeth_card_list_struct qeth_core_card_list;
-
+extern struct kmem_cache *qeth_core_header_cache;
 extern struct qeth_dbf_info qeth_dbf[QETH_DBF_INFOS];
 
 void qeth_set_allowed_threads(struct qeth_card *, unsigned long , int);
@@ -843,7 +844,7 @@ int qeth_get_priority_queue(struct qeth_card *, struct sk_buff *, int, int);
 int qeth_get_elements_no(struct qeth_card *, void *, struct sk_buff *, int);
 int qeth_do_send_packet_fast(struct qeth_card *, struct qeth_qdio_out_q *,
                         struct sk_buff *, struct qeth_hdr *, int,
-                        struct qeth_eddp_context *);
+                        struct qeth_eddp_context *, int, int);
 int qeth_do_send_packet(struct qeth_card *, struct qeth_qdio_out_q *,
                     struct sk_buff *, struct qeth_hdr *,
                     int, struct qeth_eddp_context *);
diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index cebb25e36e82..bd420d1b9a0d 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -19,8 +19,8 @@
 #include <linux/mii.h>
 #include <linux/kthread.h>
 
-#include <asm-s390/ebcdic.h>
-#include <asm-s390/io.h>
+#include <asm/ebcdic.h>
+#include <asm/io.h>
 #include <asm/s390_rdev.h>
 
 #include "qeth_core.h"
@@ -48,6 +48,8 @@ EXPORT_SYMBOL_GPL(qeth_dbf);
 
 struct qeth_card_list_struct qeth_core_card_list;
 EXPORT_SYMBOL_GPL(qeth_core_card_list);
+struct kmem_cache *qeth_core_header_cache;
+EXPORT_SYMBOL_GPL(qeth_core_header_cache);
 
 static struct device *qeth_core_root_dev;
 static unsigned int known_devices[][10] = QETH_MODELLIST_ARRAY;
@@ -933,6 +935,10 @@ static void qeth_clear_output_buffer(struct qeth_qdio_out_q *queue,
         }
         qeth_eddp_buf_release_contexts(buf);
         for (i = 0; i < QETH_MAX_BUFFER_ELEMENTS(queue->card); ++i) {
+                if (buf->buffer->element[i].addr && buf->is_header[i])
+                        kmem_cache_free(qeth_core_header_cache,
+                                buf->buffer->element[i].addr);
+                buf->is_header[i] = 0;
                 buf->buffer->element[i].length = 0;
                 buf->buffer->element[i].addr = NULL;
                 buf->buffer->element[i].flags = 0;
@@ -3002,8 +3008,8 @@ int qeth_get_elements_no(struct qeth_card *card, void *hdr,
         if (skb_shinfo(skb)->nr_frags > 0)
                 elements_needed = (skb_shinfo(skb)->nr_frags + 1);
         if (elements_needed == 0)
-                elements_needed = 1 + (((((unsigned long) hdr) % PAGE_SIZE)
-                        + skb->len) >> PAGE_SHIFT);
+                elements_needed = 1 + (((((unsigned long) skb->data) %
+                                PAGE_SIZE) + skb->len) >> PAGE_SHIFT);
         if ((elements_needed + elems) > QETH_MAX_BUFFER_ELEMENTS(card)) {
                 QETH_DBF_MESSAGE(2, "Invalid size of IP packet "
                         "(Number=%d / Length=%d). Discarded.\n",
@@ -3015,7 +3021,8 @@ int qeth_get_elements_no(struct qeth_card *card, void *hdr,
 EXPORT_SYMBOL_GPL(qeth_get_elements_no);
 
 static inline void __qeth_fill_buffer(struct sk_buff *skb,
-        struct qdio_buffer *buffer, int is_tso, int *next_element_to_fill)
+        struct qdio_buffer *buffer, int is_tso, int *next_element_to_fill,
+        int offset)
 {
         int length = skb->len;
         int length_here;
@@ -3027,6 +3034,11 @@ static inline void __qeth_fill_buffer(struct sk_buff *skb,
         data = skb->data;
         first_lap = (is_tso == 0 ? 1 : 0);
 
+        if (offset >= 0) {
+                data = skb->data + offset;
+                first_lap = 0;
+        }
+
         while (length > 0) {
                 /* length_here is the remaining amount of data in this page */
                 length_here = PAGE_SIZE - ((unsigned long) data % PAGE_SIZE);
@@ -3058,22 +3070,22 @@ static inline void __qeth_fill_buffer(struct sk_buff *skb,
 }
 
 static inline int qeth_fill_buffer(struct qeth_qdio_out_q *queue,
-                struct qeth_qdio_out_buffer *buf, struct sk_buff *skb)
+                struct qeth_qdio_out_buffer *buf, struct sk_buff *skb,
+                struct qeth_hdr *hdr, int offset, int hd_len)
 {
         struct qdio_buffer *buffer;
-        struct qeth_hdr_tso *hdr;
         int flush_cnt = 0, hdr_len, large_send = 0;
 
         buffer = buf->buffer;
         atomic_inc(&skb->users);
         skb_queue_tail(&buf->skb_list, skb);
 
-        hdr  = (struct qeth_hdr_tso *) skb->data;
         /*check first on TSO ....*/
-        if (hdr->hdr.hdr.l3.id == QETH_HEADER_TYPE_TSO) {
+        if (hdr->hdr.l3.id == QETH_HEADER_TYPE_TSO) {
                 int element = buf->next_element_to_fill;
 
-                hdr_len = sizeof(struct qeth_hdr_tso) + hdr->ext.dg_hdr_len;
+                hdr_len = sizeof(struct qeth_hdr_tso) +
+                        ((struct qeth_hdr_tso *)hdr)->ext.dg_hdr_len;
                 /*fill first buffer entry only with header information */
                 buffer->element[element].addr = skb->data;
                 buffer->element[element].length = hdr_len;
@@ -3083,9 +3095,20 @@ static inline int qeth_fill_buffer(struct qeth_qdio_out_q *queue,
                 skb->len  -= hdr_len;
                 large_send = 1;
         }
+
+        if (offset >= 0) {
+                int element = buf->next_element_to_fill;
+                buffer->element[element].addr = hdr;
+                buffer->element[element].length = sizeof(struct qeth_hdr) +
+                                                        hd_len;
+                buffer->element[element].flags = SBAL_FLAGS_FIRST_FRAG;
+                buf->is_header[element] = 1;
+                buf->next_element_to_fill++;
+        }
+
         if (skb_shinfo(skb)->nr_frags == 0)
                 __qeth_fill_buffer(skb, buffer, large_send,
-                                   (int *)&buf->next_element_to_fill);
+                                (int *)&buf->next_element_to_fill, offset);
         else
                 __qeth_fill_buffer_frag(skb, buffer, large_send,
                                         (int *)&buf->next_element_to_fill);
@@ -3115,7 +3138,7 @@ static inline int qeth_fill_buffer(struct qeth_qdio_out_q *queue,
 int qeth_do_send_packet_fast(struct qeth_card *card,
                 struct qeth_qdio_out_q *queue, struct sk_buff *skb,
                 struct qeth_hdr *hdr, int elements_needed,
-                struct qeth_eddp_context *ctx)
+                struct qeth_eddp_context *ctx, int offset, int hd_len)
 {
         struct qeth_qdio_out_buffer *buffer;
         int buffers_needed = 0;
@@ -3148,7 +3171,7 @@ int qeth_do_send_packet_fast(struct qeth_card *card,
         }
         atomic_set(&queue->state, QETH_OUT_Q_UNLOCKED);
         if (ctx == NULL) {
-                qeth_fill_buffer(queue, buffer, skb);
+                qeth_fill_buffer(queue, buffer, skb, hdr, offset, hd_len);
                 qeth_flush_buffers(queue, index, 1);
         } else {
                 flush_cnt = qeth_eddp_fill_buffer(queue, ctx, index);
@@ -3224,7 +3247,7 @@ int qeth_do_send_packet(struct qeth_card *card, struct qeth_qdio_out_q *queue,
                 }
         }
         if (ctx == NULL)
-                tmp = qeth_fill_buffer(queue, buffer, skb);
+                tmp = qeth_fill_buffer(queue, buffer, skb, hdr, -1, 0);
         else {
                 tmp = qeth_eddp_fill_buffer(queue, ctx,
                                                 queue->next_buf_to_fill);
@@ -4443,8 +4466,17 @@ static int __init qeth_core_init(void)
         rc = IS_ERR(qeth_core_root_dev) ? PTR_ERR(qeth_core_root_dev) : 0;
         if (rc)
                 goto register_err;
-        return 0;
 
+        qeth_core_header_cache = kmem_cache_create("qeth_hdr",
+                        sizeof(struct qeth_hdr) + ETH_HLEN, 64, 0, NULL);
+        if (!qeth_core_header_cache) {
+                rc = -ENOMEM;
+                goto slab_err;
+        }
+
+        return 0;
+slab_err:
+        s390_root_dev_unregister(qeth_core_root_dev);
 register_err:
         driver_remove_file(&qeth_core_ccwgroup_driver.driver,
                            &driver_attr_group);
@@ -4466,6 +4498,7 @@ static void __exit qeth_core_exit(void)
                            &driver_attr_group);
         ccwgroup_driver_unregister(&qeth_core_ccwgroup_driver);
         ccw_driver_unregister(&qeth_ccw_driver);
+        kmem_cache_destroy(qeth_core_header_cache);
         qeth_unregister_dbf_views();
         PRINT_INFO("core functions removed\n");
 }
diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c
index a8b069cd9a4c..b3cee032f578 100644
--- a/drivers/s390/net/qeth_l2_main.c
+++ b/drivers/s390/net/qeth_l2_main.c
@@ -243,8 +243,7 @@ static void qeth_l2_get_packet_type(struct qeth_card *card,
 static void qeth_l2_fill_header(struct qeth_card *card, struct qeth_hdr *hdr,
                         struct sk_buff *skb, int ipv, int cast_type)
 {
-        struct vlan_ethhdr *veth = (struct vlan_ethhdr *)((skb->data) +
-                                        QETH_HEADER_SIZE);
+        struct vlan_ethhdr *veth = (struct vlan_ethhdr *)skb_mac_header(skb);
 
         memset(hdr, 0, sizeof(struct qeth_hdr));
         hdr->hdr.l2.id = QETH_HEADER_TYPE_LAYER2;
@@ -621,6 +620,9 @@ static int qeth_l2_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
         int tx_bytes = skb->len;
         enum qeth_large_send_types large_send = QETH_LARGE_SEND_NO;
         struct qeth_eddp_context *ctx = NULL;
+        int data_offset = -1;
+        int elements_needed = 0;
+        int hd_len = 0;
 
         if ((card->state != CARD_STATE_UP) || !card->lan_online) {
                 card->stats.tx_carrier_errors++;
@@ -643,13 +645,32 @@ static int qeth_l2_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
         if (card->info.type == QETH_CARD_TYPE_OSN)
                 hdr = (struct qeth_hdr *)skb->data;
         else {
-                /* create a clone with writeable headroom */
-                new_skb = skb_realloc_headroom(skb, sizeof(struct qeth_hdr));
-                if (!new_skb)
-                        goto tx_drop;
-                hdr = (struct qeth_hdr *)skb_push(new_skb,
+                if ((card->info.type == QETH_CARD_TYPE_IQD) && (!large_send) &&
+                    (skb_shinfo(skb)->nr_frags == 0)) {
+                        new_skb = skb;
+                        data_offset = ETH_HLEN;
+                        hd_len = ETH_HLEN;
+                        hdr = kmem_cache_alloc(qeth_core_header_cache,
+                                                GFP_ATOMIC);
+                        if (!hdr)
+                                goto tx_drop;
+                        elements_needed++;
+                        skb_reset_mac_header(new_skb);
+                        qeth_l2_fill_header(card, hdr, new_skb, ipv, cast_type);
+                        hdr->hdr.l2.pkt_length = new_skb->len;
+                        memcpy(((char *)hdr) + sizeof(struct qeth_hdr),
+                                skb_mac_header(new_skb), ETH_HLEN);
+                } else {
+                        /* create a clone with writeable headroom */
+                        new_skb = skb_realloc_headroom(skb,
+                                                sizeof(struct qeth_hdr));
+                        if (!new_skb)
+                                goto tx_drop;
+                        hdr = (struct qeth_hdr *)skb_push(new_skb,
                                                 sizeof(struct qeth_hdr));
-                qeth_l2_fill_header(card, hdr, new_skb, ipv, cast_type);
+                        skb_set_mac_header(new_skb, sizeof(struct qeth_hdr));
+                        qeth_l2_fill_header(card, hdr, new_skb, ipv, cast_type);
+                }
         }
 
         if (large_send == QETH_LARGE_SEND_EDDP) {
@@ -660,9 +681,13 @@ static int qeth_l2_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
                         goto tx_drop;
                 }
         } else {
-                elements = qeth_get_elements_no(card, (void *)hdr, new_skb, 0);
-                if (!elements)
+                elements = qeth_get_elements_no(card, (void *)hdr, new_skb,
+                                                elements_needed);
+                if (!elements) {
+                        if (data_offset >= 0)
+                                kmem_cache_free(qeth_core_header_cache, hdr);
                         goto tx_drop;
+                }
         }
 
         if ((large_send == QETH_LARGE_SEND_NO) &&
@@ -674,7 +699,7 @@ static int qeth_l2_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
                                          elements, ctx);
         else
                 rc = qeth_do_send_packet_fast(card, queue, new_skb, hdr,
-                                              elements, ctx);
+                                        elements, ctx, data_offset, hd_len);
         if (!rc) {
                 card->stats.tx_packets++;
                 card->stats.tx_bytes += tx_bytes;
@@ -701,6 +726,9 @@ static int qeth_l2_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
                 if (ctx != NULL)
                         qeth_eddp_put_context(ctx);
 
+                if (data_offset >= 0)
+                        kmem_cache_free(qeth_core_header_cache, hdr);
+
                 if (rc == -EBUSY) {
                         if (new_skb != skb)
                                 dev_kfree_skb_any(new_skb);
diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c
index 3e1d13857350..dd72c3c20165 100644
--- a/drivers/s390/net/qeth_l3_main.c
+++ b/drivers/s390/net/qeth_l3_main.c
@@ -2604,6 +2604,7 @@ static int qeth_l3_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
         int tx_bytes = skb->len;
         enum qeth_large_send_types large_send = QETH_LARGE_SEND_NO;
         struct qeth_eddp_context *ctx = NULL;
+        int data_offset = -1;
 
         if ((card->info.type == QETH_CARD_TYPE_IQD) &&
             (skb->protocol != htons(ETH_P_IPV6)) &&
@@ -2624,14 +2625,28 @@ static int qeth_l3_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
                 card->perf_stats.outbound_start_time = qeth_get_micros();
         }
 
-        /* create a clone with writeable headroom */
-        new_skb = skb_realloc_headroom(skb, sizeof(struct qeth_hdr_tso) +
-                                        VLAN_HLEN);
-        if (!new_skb)
-                goto tx_drop;
+        if (skb_is_gso(skb))
+                large_send = card->options.large_send;
+
+        if ((card->info.type == QETH_CARD_TYPE_IQD) && (!large_send) &&
+            (skb_shinfo(skb)->nr_frags == 0)) {
+                new_skb = skb;
+                data_offset = ETH_HLEN;
+                hdr = kmem_cache_alloc(qeth_core_header_cache, GFP_ATOMIC);
+                if (!hdr)
+                        goto tx_drop;
+                elements_needed++;
+        } else {
+                /* create a clone with writeable headroom */
+                new_skb = skb_realloc_headroom(skb, sizeof(struct qeth_hdr_tso)
+                                        + VLAN_HLEN);
+                if (!new_skb)
+                        goto tx_drop;
+        }
 
         if (card->info.type == QETH_CARD_TYPE_IQD) {
-                skb_pull(new_skb, ETH_HLEN);
+                if (data_offset < 0)
+                        skb_pull(new_skb, ETH_HLEN);
         } else {
                 if (new_skb->protocol == htons(ETH_P_IP)) {
                         if (card->dev->type == ARPHRD_IEEE802_TR)
@@ -2657,9 +2672,6 @@ static int qeth_l3_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
         netif_stop_queue(dev);
 
-        if (skb_is_gso(new_skb))
-                large_send = card->options.large_send;
-
         /* fix hardware limitation: as long as we do not have sbal
          * chaining we can not send long frag lists so we temporary
          * switch to EDDP
@@ -2677,9 +2689,16 @@ static int qeth_l3_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
                 qeth_tso_fill_header(card, hdr, new_skb);
                 elements_needed++;
         } else {
-                hdr = (struct qeth_hdr *)skb_push(new_skb,
+                if (data_offset < 0) {
+                        hdr = (struct qeth_hdr *)skb_push(new_skb,
                                                 sizeof(struct qeth_hdr));
-                qeth_l3_fill_header(card, hdr, new_skb, ipv, cast_type);
+                        qeth_l3_fill_header(card, hdr, new_skb, ipv,
+                                                cast_type);
+                } else {
+                        qeth_l3_fill_header(card, hdr, new_skb, ipv,
+                                                cast_type);
+                        hdr->hdr.l3.length = new_skb->len - data_offset;
+                }
         }
 
         if (large_send == QETH_LARGE_SEND_EDDP) {
@@ -2695,8 +2714,11 @@ static int qeth_l3_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
         } else {
                 int elems = qeth_get_elements_no(card, (void *)hdr, new_skb,
                                                  elements_needed);
-                if (!elems)
+                if (!elems) {
+                        if (data_offset >= 0)
+                                kmem_cache_free(qeth_core_header_cache, hdr);
                         goto tx_drop;
+                }
                 elements_needed += elems;
         }
 
@@ -2709,7 +2731,7 @@ static int qeth_l3_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
                                          elements_needed, ctx);
         else
                 rc = qeth_do_send_packet_fast(card, queue, new_skb, hdr,
-                                              elements_needed, ctx);
+                                        elements_needed, ctx, data_offset, 0);
 
         if (!rc) {
                 card->stats.tx_packets++;
@@ -2737,6 +2759,9 @@ static int qeth_l3_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
                 if (ctx != NULL)
                         qeth_eddp_put_context(ctx);
 
+                if (data_offset >= 0)
+                        kmem_cache_free(qeth_core_header_cache, hdr);
+
                 if (rc == -EBUSY) {
                         if (new_skb != skb)
                                 dev_kfree_skb_any(new_skb);
diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index 7a4409ab30ea..a319a20ed440 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -8,6 +8,7 @@
 
 #include <linux/kthread.h>
 #include <linux/vmalloc.h>
+#include <linux/delay.h>
 
 static int qla24xx_vport_disable(struct fc_vport *, bool);
 
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index a97f1ae11f78..342e12fb1c25 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -1885,7 +1885,7 @@ static int serial8250_startup(struct uart_port *port)
                  * the interrupt is enabled.  Delays are necessary to
                  * allow register changes to become visible.
                  */
-                spin_lock(&up->port.lock);
+                spin_lock_irqsave(&up->port.lock, flags);
                 if (up->port.flags & UPF_SHARE_IRQ)
                         disable_irq_nosync(up->port.irq);
 
@@ -1901,7 +1901,7 @@ static int serial8250_startup(struct uart_port *port)
 
                 if (up->port.flags & UPF_SHARE_IRQ)
                         enable_irq(up->port.irq);
-                spin_unlock(&up->port.lock);
+                spin_unlock_irqrestore(&up->port.lock, flags);
 
                 /*
                  * If the interrupt is not reasserted, setup a timer to
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 3a0bbbe17aa3..7e7383e890d8 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -42,7 +42,6 @@ obj-$(CONFIG_SERIAL_68328) += 68328serial.o
 obj-$(CONFIG_SERIAL_68360) += 68360serial.o
 obj-$(CONFIG_SERIAL_COLDFIRE) += mcfserial.o
 obj-$(CONFIG_SERIAL_MCF) += mcf.o
-obj-$(CONFIG_V850E_UART) += v850e_uart.o
 obj-$(CONFIG_SERIAL_PMACZILOG) += pmac_zilog.o
 obj-$(CONFIG_SERIAL_LH7A40X) += serial_lh7a40x.o
 obj-$(CONFIG_SERIAL_DZ) += dz.o
diff --git a/drivers/serial/cpm_uart/cpm_uart.h b/drivers/serial/cpm_uart/cpm_uart.h
index 5c76e0ae0582..7274b527a3c1 100644
--- a/drivers/serial/cpm_uart/cpm_uart.h
+++ b/drivers/serial/cpm_uart/cpm_uart.h
@@ -50,6 +50,15 @@
 
 #define SCC_WAIT_CLOSING 100
 
+#define GPIO_CTS        0
+#define GPIO_RTS        1
+#define GPIO_DCD        2
+#define GPIO_DSR        3
+#define GPIO_DTR        4
+#define GPIO_RI         5
+
+#define NUM_GPIOS       (GPIO_RI+1)
+
 struct uart_cpm_port {
         struct uart_port        port;
         u16                     rx_nrfifos;
@@ -68,6 +77,7 @@ struct uart_cpm_port {
         unsigned char           *rx_buf;
         u32                     flags;
         void                    (*set_lineif)(struct uart_cpm_port *);
+        struct clk              *clk;
         u8                      brg;
         uint                     dp_addr;
         void                    *mem_addr;
@@ -82,6 +92,7 @@ struct uart_cpm_port {
         int                     wait_closing;
         /* value to combine with opcode to form cpm command */
         u32                     command;
+        int                     gpios[NUM_GPIOS];
 };
 
 extern int cpm_uart_nr;
diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
index a4f86927a74b..25efca5a7a1f 100644
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -43,6 +43,9 @@
 #include <linux/dma-mapping.h>
 #include <linux/fs_uart_pd.h>
 #include <linux/of_platform.h>
+#include <linux/gpio.h>
+#include <linux/of_gpio.h>
+#include <linux/clk.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -96,13 +99,41 @@ static unsigned int cpm_uart_tx_empty(struct uart_port *port)
 
 static void cpm_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
 {
-        /* Whee. Do nothing. */
+        struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
+
+        if (pinfo->gpios[GPIO_RTS] >= 0)
+                gpio_set_value(pinfo->gpios[GPIO_RTS], !(mctrl & TIOCM_RTS));
+
+        if (pinfo->gpios[GPIO_DTR] >= 0)
+                gpio_set_value(pinfo->gpios[GPIO_DTR], !(mctrl & TIOCM_DTR));
 }
 
 static unsigned int cpm_uart_get_mctrl(struct uart_port *port)
 {
-        /* Whee. Do nothing. */
-        return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
+        struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
+        unsigned int mctrl = TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
+
+        if (pinfo->gpios[GPIO_CTS] >= 0) {
+                if (gpio_get_value(pinfo->gpios[GPIO_CTS]))
+                        mctrl &= ~TIOCM_CTS;
+        }
+
+        if (pinfo->gpios[GPIO_DSR] >= 0) {
+                if (gpio_get_value(pinfo->gpios[GPIO_DSR]))
+                        mctrl &= ~TIOCM_DSR;
+        }
+
+        if (pinfo->gpios[GPIO_DCD] >= 0) {
+                if (gpio_get_value(pinfo->gpios[GPIO_DCD]))
+                        mctrl &= ~TIOCM_CAR;
+        }
+
+        if (pinfo->gpios[GPIO_RI] >= 0) {
+                if (!gpio_get_value(pinfo->gpios[GPIO_RI]))
+                        mctrl |= TIOCM_RNG;
+        }
+
+        return mctrl;
 }
 
 /*
@@ -566,7 +597,10 @@ static void cpm_uart_set_termios(struct uart_port *port,
                 out_be16(&sccp->scc_psmr, (sbits << 12) | scval);
         }
 
-        cpm_set_brg(pinfo->brg - 1, baud);
+        if (pinfo->clk)
+                clk_set_rate(pinfo->clk, baud);
+        else
+                cpm_set_brg(pinfo->brg - 1, baud);
         spin_unlock_irqrestore(&port->lock, flags);
 }
 
@@ -991,14 +1025,23 @@ static int cpm_uart_init_port(struct device_node *np,
         void __iomem *mem, *pram;
         int len;
         int ret;
+        int i;
 
-        data = of_get_property(np, "fsl,cpm-brg", &len);
-        if (!data || len != 4) {
-                printk(KERN_ERR "CPM UART %s has no/invalid "
-                                "fsl,cpm-brg property.\n", np->name);
-                return -EINVAL;
+        data = of_get_property(np, "clock", NULL);
+        if (data) {
+                struct clk *clk = clk_get(NULL, (const char*)data);
+                if (!IS_ERR(clk))
+                        pinfo->clk = clk;
+        }
+        if (!pinfo->clk) {
+                data = of_get_property(np, "fsl,cpm-brg", &len);
+                if (!data || len != 4) {
+                        printk(KERN_ERR "CPM UART %s has no/invalid "
+                                        "fsl,cpm-brg property.\n", np->name);
+                        return -EINVAL;
+                }
+                pinfo->brg = *data;
         }
-        pinfo->brg = *data;
 
         data = of_get_property(np, "fsl,cpm-command", &len);
         if (!data || len != 4) {
@@ -1050,6 +1093,9 @@ static int cpm_uart_init_port(struct device_node *np,
                 goto out_pram;
         }
 
+        for (i = 0; i < NUM_GPIOS; i++)
+                pinfo->gpios[i] = of_get_gpio(np, i);
+
         return cpm_uart_request_port(&pinfo->port);
 
 out_pram:
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index 208e42ba9455..3df2aaec829f 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -410,7 +410,6 @@ static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
 #endif
 
 #if defined(CONFIG_CPU_SUBTYPE_SH7760) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7763) || \
     defined(CONFIG_CPU_SUBTYPE_SH7780) || \
     defined(CONFIG_CPU_SUBTYPE_SH7785)
 static inline int scif_txroom(struct uart_port *port)
@@ -422,6 +421,22 @@ static inline int scif_rxroom(struct uart_port *port)
 {
         return sci_in(port, SCRFDR) & 0xff;
 }
+#elif defined(CONFIG_CPU_SUBTYPE_SH7763)
+static inline int scif_txroom(struct uart_port *port)
+{
+        if((port->mapbase == 0xffe00000) || (port->mapbase == 0xffe08000)) /* SCIF0/1*/
+                return SCIF_TXROOM_MAX - (sci_in(port, SCTFDR) & 0xff);
+        else /* SCIF2 */
+                return SCIF2_TXROOM_MAX - (sci_in(port, SCFDR) >> 8);
+}
+
+static inline int scif_rxroom(struct uart_port *port)
+{
+        if((port->mapbase == 0xffe00000) || (port->mapbase == 0xffe08000)) /* SCIF0/1*/
+                return sci_in(port, SCRFDR) & 0xff;
+        else /* SCIF2 */
+                return sci_in(port, SCFDR) & SCIF2_RFDC_MASK;
+}
 #else
 static inline int scif_txroom(struct uart_port *port)
 {
diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h
index eb84833233fd..8a0749e34ca3 100644
--- a/drivers/serial/sh-sci.h
+++ b/drivers/serial/sh-sci.h
@@ -123,8 +123,9 @@
 #elif defined(CONFIG_CPU_SUBTYPE_SH7763)
 # define SCSPTR0 0xffe00024 /* 16 bit SCIF */
 # define SCSPTR1 0xffe08024 /* 16 bit SCIF */
+# define SCSPTR2 0xffe10020 /* 16 bit SCIF/IRDA */
 # define SCIF_ORER 0x0001  /* overrun error bit */
-# define SCSCR_INIT(port)       0x3a    /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
+# define SCSCR_INIT(port)       0x38    /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
 # define SCIF_ONLY
 #elif defined(CONFIG_CPU_SUBTYPE_SH7770)
 # define SCSPTR0 0xff923020 /* 16 bit SCIF */
@@ -188,6 +189,7 @@
     defined(CONFIG_CPU_SUBTYPE_SH7750S) || \
     defined(CONFIG_CPU_SUBTYPE_SH7751)  || \
     defined(CONFIG_CPU_SUBTYPE_SH7751R) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7763)  || \
     defined(CONFIG_CPU_SUBTYPE_SH7780)  || \
     defined(CONFIG_CPU_SUBTYPE_SH7785)  || \
     defined(CONFIG_CPU_SUBTYPE_SHX3)
@@ -225,14 +227,21 @@
 #if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
     defined(CONFIG_CPU_SUBTYPE_SH7720) || \
     defined(CONFIG_CPU_SUBTYPE_SH7721)
-#define SCIF_ORER    0x0200
-#define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK | SCIF_ORER)
-#define SCIF_RFDC_MASK 0x007f
-#define SCIF_TXROOM_MAX 64
+# define SCIF_ORER    0x0200
+# define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK | SCIF_ORER)
+# define SCIF_RFDC_MASK 0x007f
+# define SCIF_TXROOM_MAX 64
+#elif defined(CONFIG_CPU_SUBTYPE_SH7763)
+# define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK )
+# define SCIF_RFDC_MASK 0x007f
+# define SCIF_TXROOM_MAX 64
+/* SH7763 SCIF2 support */
+# define SCIF2_RFDC_MASK 0x001f
+# define SCIF2_TXROOM_MAX 16
 #else
-#define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK)
-#define SCIF_RFDC_MASK 0x001f
-#define SCIF_TXROOM_MAX 16
+# define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK)
+# define SCIF_RFDC_MASK 0x001f
+# define SCIF_TXROOM_MAX 16
 #endif
 
 #if defined(SCI_ONLY)
@@ -442,7 +451,6 @@ SCIx_FNS(SCxSR,  0x08,  8, 0x10,  8, 0x08, 16, 0x10, 16, 0x04,  8)
 SCIx_FNS(SCxRDR, 0x0a,  8, 0x14,  8, 0x0A,  8, 0x14,  8, 0x05,  8)
 SCIF_FNS(SCFCR,                      0x0c,  8, 0x18, 16)
 #if defined(CONFIG_CPU_SUBTYPE_SH7760) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7763) || \
     defined(CONFIG_CPU_SUBTYPE_SH7780) || \
     defined(CONFIG_CPU_SUBTYPE_SH7785)
 SCIF_FNS(SCFDR,                      0x0e, 16, 0x1C, 16)
@@ -450,6 +458,14 @@ SCIF_FNS(SCTFDR,		     0x0e, 16, 0x1C, 16)
 SCIF_FNS(SCRFDR,                     0x0e, 16, 0x20, 16)
 SCIF_FNS(SCSPTR,                        0,  0, 0x24, 16)
 SCIF_FNS(SCLSR,                         0,  0, 0x28, 16)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7763)
+SCIF_FNS(SCFDR,                         0,  0, 0x1C, 16)
+SCIF_FNS(SCSPTR2,                       0,  0, 0x20, 16)
+SCIF_FNS(SCLSR2,                        0,  0, 0x24, 16)
+SCIF_FNS(SCTFDR,                     0x0e, 16, 0x1C, 16)
+SCIF_FNS(SCRFDR,                     0x0e, 16, 0x20, 16)
+SCIF_FNS(SCSPTR,                        0,  0, 0x24, 16)
+SCIF_FNS(SCLSR,                         0,  0, 0x28, 16)
 #else
 SCIF_FNS(SCFDR,                      0x0e, 16, 0x1C, 16)
 #if defined(CONFIG_CPU_SUBTYPE_SH7722)
@@ -652,6 +668,9 @@ static inline int sci_rxd_in(struct uart_port *port)
                 return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
         if (port->mapbase == 0xffe08000)
                 return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
+        if (port->mapbase == 0xffe10000)
+                return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF/IRDA */
+
         return 1;
 }
 #elif defined(CONFIG_CPU_SUBTYPE_SH7770)
@@ -764,8 +783,7 @@ static inline int sci_rxd_in(struct uart_port *port)
  * -- Mitch Davis - 15 Jul 2000
  */
 
-#if defined(CONFIG_CPU_SUBTYPE_SH7763) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7780) || \
+#if defined(CONFIG_CPU_SUBTYPE_SH7780) || \
     defined(CONFIG_CPU_SUBTYPE_SH7785)
 #define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(16*bps)-1)
 #elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \
diff --git a/drivers/serial/v850e_uart.c b/drivers/serial/v850e_uart.c
deleted file mode 100644
index 5acf061b6cd2..000000000000
--- a/drivers/serial/v850e_uart.c
+++ /dev/null
@@ -1,548 +0,0 @@
-/*
- * drivers/serial/v850e_uart.c -- Serial I/O using V850E on-chip UART or UARTB
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-/* This driver supports both the original V850E UART interface (called
-   merely `UART' in the docs) and the newer `UARTB' interface, which is
-   roughly a superset of the first one.  The selection is made at
-   configure time -- if CONFIG_V850E_UARTB is defined, then UARTB is
-   presumed, otherwise the old UART -- as these are on-CPU UARTS, a system
-   can never have both.
-
-   The UARTB interface also has a 16-entry FIFO mode, which is not
-   yet supported by this driver.  */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/console.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-
-#include <asm/v850e_uart.h>
-
-/* Initial UART state.  This may be overridden by machine-dependent headers. */
-#ifndef V850E_UART_INIT_BAUD
-#define V850E_UART_INIT_BAUD    115200
-#endif
-#ifndef V850E_UART_INIT_CFLAGS
-#define V850E_UART_INIT_CFLAGS  (B115200 | CS8 | CREAD)
-#endif
-
-/* A string used for prefixing printed descriptions; since the same UART
-   macro is actually used on other chips than the V850E.  This must be a
-   constant string.  */
-#ifndef V850E_UART_CHIP_NAME
-#define V850E_UART_CHIP_NAME    "V850E"
-#endif
-
-#define V850E_UART_MINOR_BASE   64         /* First tty minor number */
-
-
-/* Low-level UART functions.  */
-
-/* Configure and turn on uart channel CHAN, using the termios `control
-   modes' bits in CFLAGS, and a baud-rate of BAUD.  */
-void v850e_uart_configure (unsigned chan, unsigned cflags, unsigned baud)
-{
-        int flags;
-        v850e_uart_speed_t old_speed;
-        v850e_uart_config_t old_config;
-        v850e_uart_speed_t new_speed = v850e_uart_calc_speed (baud);
-        v850e_uart_config_t new_config = v850e_uart_calc_config (cflags);
-
-        /* Disable interrupts while we're twiddling the hardware.  */
-        local_irq_save (flags);
-
-#ifdef V850E_UART_PRE_CONFIGURE
-        V850E_UART_PRE_CONFIGURE (chan, cflags, baud);
-#endif
-
-        old_config = V850E_UART_CONFIG (chan);
-        old_speed = v850e_uart_speed (chan);
-
-        if (! v850e_uart_speed_eq (old_speed, new_speed)) {
-                /* The baud rate has changed.  First, disable the UART.  */
-                V850E_UART_CONFIG (chan) = V850E_UART_CONFIG_FINI;
-                old_config = 0; /* Force the uart to be re-initialized. */
-
-                /* Reprogram the baud-rate generator.  */
-                v850e_uart_set_speed (chan, new_speed);
-        }
-
-        if (! (old_config & V850E_UART_CONFIG_ENABLED)) {
-                /* If we are using the uart for the first time, start by
-                   enabling it, which must be done before turning on any
-                   other bits.  */
-                V850E_UART_CONFIG (chan) = V850E_UART_CONFIG_INIT;
-                /* See the initial state.  */
-                old_config = V850E_UART_CONFIG (chan);
-        }
-
-        if (new_config != old_config) {
-                /* Which of the TXE/RXE bits we'll temporarily turn off
-                   before changing other control bits.  */
-                unsigned temp_disable = 0;
-                /* Which of the TXE/RXE bits will be enabled.  */
-                unsigned enable = 0;
-                unsigned changed_bits = new_config ^ old_config;
-
-                /* Which of RX/TX will be enabled in the new configuration.  */
-                if (new_config & V850E_UART_CONFIG_RX_BITS)
-                        enable |= (new_config & V850E_UART_CONFIG_RX_ENABLE);
-                if (new_config & V850E_UART_CONFIG_TX_BITS)
-                        enable |= (new_config & V850E_UART_CONFIG_TX_ENABLE);
-
-                /* Figure out which of RX/TX needs to be disabled; note
-                   that this will only happen if they're not already
-                   disabled.  */
-                if (changed_bits & V850E_UART_CONFIG_RX_BITS)
-                        temp_disable
-                                |= (old_config & V850E_UART_CONFIG_RX_ENABLE);
-                if (changed_bits & V850E_UART_CONFIG_TX_BITS)
-                        temp_disable
-                                |= (old_config & V850E_UART_CONFIG_TX_ENABLE);
-
-                /* We have to turn off RX and/or TX mode before changing
-                   any associated control bits.  */
-                if (temp_disable)
-                        V850E_UART_CONFIG (chan) = old_config & ~temp_disable;
-
-                /* Write the new control bits, while RX/TX are disabled. */ 
-                if (changed_bits & ~enable)
-                        V850E_UART_CONFIG (chan) = new_config & ~enable;
-
-                v850e_uart_config_delay (new_config, new_speed);
-
-                /* Write the final version, with enable bits turned on.  */
-                V850E_UART_CONFIG (chan) = new_config;
-        }
-
-        local_irq_restore (flags);
-}
-
-
-/*  Low-level console. */
-
-#ifdef CONFIG_V850E_UART_CONSOLE
-
-static void v850e_uart_cons_write (struct console *co,
-                                   const char *s, unsigned count)
-{
-        if (count > 0) {
-                unsigned chan = co->index;
-                unsigned irq = V850E_UART_TX_IRQ (chan);
-                int irq_was_enabled, irq_was_pending, flags;
-
-                /* We don't want to get `transmission completed'
-                   interrupts, since we're busy-waiting, so we disable them
-                   while sending (we don't disable interrupts entirely
-                   because sending over a serial line is really slow).  We
-                   save the status of the tx interrupt and restore it when
-                   we're done so that using printk doesn't interfere with
-                   normal serial transmission (other than interleaving the
-                   output, of course!).  This should work correctly even if
-                   this function is interrupted and the interrupt printks
-                   something.  */
-
-                /* Disable interrupts while fiddling with tx interrupt.  */
-                local_irq_save (flags);
-                /* Get current tx interrupt status.  */
-                irq_was_enabled = v850e_intc_irq_enabled (irq);
-                irq_was_pending = v850e_intc_irq_pending (irq);
-                /* Disable tx interrupt if necessary.  */
-                if (irq_was_enabled)
-                        v850e_intc_disable_irq (irq);
-                /* Turn interrupts back on.  */
-                local_irq_restore (flags);
-
-                /* Send characters.  */
-                while (count > 0) {
-                        int ch = *s++;
-
-                        if (ch == '\n') {
-                                /* We don't have the benefit of a tty
-                                   driver, so translate NL into CR LF.  */
-                                v850e_uart_wait_for_xmit_ok (chan);
-                                v850e_uart_putc (chan, '\r');
-                        }
-
-                        v850e_uart_wait_for_xmit_ok (chan);
-                        v850e_uart_putc (chan, ch);
-
-                        count--;
-                }
-
-                /* Restore saved tx interrupt status.  */
-                if (irq_was_enabled) {
-                        /* Wait for the last character we sent to be
-                           completely transmitted (as we'll get an
-                           interrupt interrupt at that point).  */
-                        v850e_uart_wait_for_xmit_done (chan);
-                        /* Clear pending interrupts received due
-                           to our transmission, unless there was already
-                           one pending, in which case we want the
-                           handler to be called.  */
-                        if (! irq_was_pending)
-                                v850e_intc_clear_pending_irq (irq);
-                        /* ... and then turn back on handling.  */
-                        v850e_intc_enable_irq (irq);
-                }
-        }
-}
-
-extern struct uart_driver v850e_uart_driver;
-static struct console v850e_uart_cons =
-{
-    .name       = "ttyS",
-    .write      = v850e_uart_cons_write,
-    .device     = uart_console_device,
-    .flags      = CON_PRINTBUFFER,
-    .cflag      = V850E_UART_INIT_CFLAGS,
-    .index      = -1,
-    .data       = &v850e_uart_driver,
-};
-
-void v850e_uart_cons_init (unsigned chan)
-{
-        v850e_uart_configure (chan, V850E_UART_INIT_CFLAGS,
-                              V850E_UART_INIT_BAUD);
-        v850e_uart_cons.index = chan;
-        register_console (&v850e_uart_cons);
-        printk ("Console: %s on-chip UART channel %d\n",
-                V850E_UART_CHIP_NAME, chan);
-}
-
-/* This is what the init code actually calls.  */
-static int v850e_uart_console_init (void)
-{
-        v850e_uart_cons_init (V850E_UART_CONSOLE_CHANNEL);
-        return 0;
-}
-console_initcall(v850e_uart_console_init);
-
-#define V850E_UART_CONSOLE &v850e_uart_cons
-
-#else /* !CONFIG_V850E_UART_CONSOLE */
-#define V850E_UART_CONSOLE 0
-#endif /* CONFIG_V850E_UART_CONSOLE */
-
-/* TX/RX interrupt handlers.  */
-
-static void v850e_uart_stop_tx (struct uart_port *port);
-
-void v850e_uart_tx (struct uart_port *port)
-{
-        struct circ_buf *xmit = &port->info->xmit;
-        int stopped = uart_tx_stopped (port);
-
-        if (v850e_uart_xmit_ok (port->line)) {
-                int tx_ch;
-
-                if (port->x_char) {
-                        tx_ch = port->x_char;
-                        port->x_char = 0;
-                } else if (!uart_circ_empty (xmit) && !stopped) {
-                        tx_ch = xmit->buf[xmit->tail];
-                        xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
-                } else
-                        goto no_xmit;
-
-                v850e_uart_putc (port->line, tx_ch);
-                port->icount.tx++;
-
-                if (uart_circ_chars_pending (xmit) < WAKEUP_CHARS)
-                        uart_write_wakeup (port);
-        }
-
- no_xmit:
-        if (uart_circ_empty (xmit) || stopped)
-                v850e_uart_stop_tx (port, stopped);
-}
-
-static irqreturn_t v850e_uart_tx_irq(int irq, void *data)
-{
-        struct uart_port *port = data;
-        v850e_uart_tx (port);
-        return IRQ_HANDLED;
-}
-
-static irqreturn_t v850e_uart_rx_irq(int irq, void *data)
-{
-        struct uart_port *port = data;
-        unsigned ch_stat = TTY_NORMAL;
-        unsigned ch = v850e_uart_getc (port->line);
-        unsigned err = v850e_uart_err (port->line);
-
-        if (err) {
-                if (err & V850E_UART_ERR_OVERRUN) {
-                        ch_stat = TTY_OVERRUN;
-                        port->icount.overrun++;
-                } else if (err & V850E_UART_ERR_FRAME) {
-                        ch_stat = TTY_FRAME;
-                        port->icount.frame++;
-                } else if (err & V850E_UART_ERR_PARITY) {
-                        ch_stat = TTY_PARITY;
-                        port->icount.parity++;
-                }
-        }
-
-        port->icount.rx++;
-
-        tty_insert_flip_char (port->info->port.tty, ch, ch_stat);
-        tty_schedule_flip (port->info->port.tty);
-
-        return IRQ_HANDLED;
-}
-
-
-/* Control functions for the serial framework.  */
-
-static void v850e_uart_nop (struct uart_port *port) { }
-static int v850e_uart_success (struct uart_port *port) { return 0; }
-
-static unsigned v850e_uart_tx_empty (struct uart_port *port)
-{
-        return TIOCSER_TEMT;    /* Can't detect.  */
-}
-
-static void v850e_uart_set_mctrl (struct uart_port *port, unsigned mctrl)
-{
-#ifdef V850E_UART_SET_RTS
-        V850E_UART_SET_RTS (port->line, (mctrl & TIOCM_RTS));
-#endif
-}
-
-static unsigned v850e_uart_get_mctrl (struct uart_port *port)
-{
-        /* We don't support DCD or DSR, so consider them permanently active. */
-        int mctrl = TIOCM_CAR | TIOCM_DSR;
-
-        /* We may support CTS.  */
-#ifdef V850E_UART_CTS
-        mctrl |= V850E_UART_CTS(port->line) ? TIOCM_CTS : 0;
-#else
-        mctrl |= TIOCM_CTS;
-#endif
-
-        return mctrl;
-}
-
-static void v850e_uart_start_tx (struct uart_port *port)
-{
-        v850e_intc_disable_irq (V850E_UART_TX_IRQ (port->line));
-        v850e_uart_tx (port);
-        v850e_intc_enable_irq (V850E_UART_TX_IRQ (port->line));
-}
-
-static void v850e_uart_stop_tx (struct uart_port *port)
-{
-        v850e_intc_disable_irq (V850E_UART_TX_IRQ (port->line));
-}
-
-static void v850e_uart_start_rx (struct uart_port *port)
-{
-        v850e_intc_enable_irq (V850E_UART_RX_IRQ (port->line));
-}
-
-static void v850e_uart_stop_rx (struct uart_port *port)
-{
-        v850e_intc_disable_irq (V850E_UART_RX_IRQ (port->line));
-}
-
-static void v850e_uart_break_ctl (struct uart_port *port, int break_ctl)
-{
-        /* Umm, do this later.  */
-}
-
-static int v850e_uart_startup (struct uart_port *port)
-{
-        int err;
-
-        /* Alloc RX irq.  */
-        err = request_irq (V850E_UART_RX_IRQ (port->line), v850e_uart_rx_irq,
-                           IRQF_DISABLED, "v850e_uart", port);
-        if (err)
-                return err;
-
-        /* Alloc TX irq.  */
-        err = request_irq (V850E_UART_TX_IRQ (port->line), v850e_uart_tx_irq,
-                           IRQF_DISABLED, "v850e_uart", port);
-        if (err) {
-                free_irq (V850E_UART_RX_IRQ (port->line), port);
-                return err;
-        }
-
-        v850e_uart_start_rx (port);
-
-        return 0;
-}
-
-static void v850e_uart_shutdown (struct uart_port *port)
-{
-        /* Disable port interrupts.  */
-        free_irq (V850E_UART_TX_IRQ (port->line), port);
-        free_irq (V850E_UART_RX_IRQ (port->line), port);
-
-        /* Turn off xmit/recv enable bits.  */
-        V850E_UART_CONFIG (port->line)
-                &= ~(V850E_UART_CONFIG_TX_ENABLE
-                     | V850E_UART_CONFIG_RX_ENABLE);
-        /* Then reset the channel.  */
-        V850E_UART_CONFIG (port->line) = 0;
-}
-
-static void
-v850e_uart_set_termios (struct uart_port *port, struct ktermios *termios,
-                        struct ktermios *old)
-{
-        unsigned cflags = termios->c_cflag;
-
-        /* Restrict flags to legal values.  */
-        if ((cflags & CSIZE) != CS7 && (cflags & CSIZE) != CS8)
-                /* The new value of CSIZE is invalid, use the old value.  */
-                cflags = (cflags & ~CSIZE)
-                        | (old ? (old->c_cflag & CSIZE) : CS8);
-
-        termios->c_cflag = cflags;
-
-        v850e_uart_configure (port->line, cflags,
-                              uart_get_baud_rate (port, termios, old,
-                                                  v850e_uart_min_baud(),
-                                                  v850e_uart_max_baud()));
-}
-
-static const char *v850e_uart_type (struct uart_port *port)
-{
-        return port->type == PORT_V850E_UART ? "v850e_uart" : 0;
-}
-
-static void v850e_uart_config_port (struct uart_port *port, int flags)
-{
-        if (flags & UART_CONFIG_TYPE)
-                port->type = PORT_V850E_UART;
-}
-
-static int
-v850e_uart_verify_port (struct uart_port *port, struct serial_struct *ser)
-{
-        if (ser->type != PORT_UNKNOWN && ser->type != PORT_V850E_UART)
-                return -EINVAL;
-        if (ser->irq != V850E_UART_TX_IRQ (port->line))
-                return -EINVAL;
-        return 0;
-}
-
-static struct uart_ops v850e_uart_ops = {
-        .tx_empty       = v850e_uart_tx_empty,
-        .get_mctrl      = v850e_uart_get_mctrl,
-        .set_mctrl      = v850e_uart_set_mctrl,
-        .start_tx       = v850e_uart_start_tx,
-        .stop_tx        = v850e_uart_stop_tx,
-        .stop_rx        = v850e_uart_stop_rx,
-        .enable_ms      = v850e_uart_nop,
-        .break_ctl      = v850e_uart_break_ctl,
-        .startup        = v850e_uart_startup,
-        .shutdown       = v850e_uart_shutdown,
-        .set_termios    = v850e_uart_set_termios,
-        .type           = v850e_uart_type,
-        .release_port   = v850e_uart_nop,
-        .request_port   = v850e_uart_success,
-        .config_port    = v850e_uart_config_port,
-        .verify_port    = v850e_uart_verify_port,
-};
-
-/* Initialization and cleanup.  */
-
-static struct uart_driver v850e_uart_driver = {
-        .owner                  = THIS_MODULE,
-        .driver_name            = "v850e_uart",
-        .dev_name               = "ttyS",
-        .major                  = TTY_MAJOR,
-        .minor                  = V850E_UART_MINOR_BASE,
-        .nr                     = V850E_UART_NUM_CHANNELS,
-        .cons                   = V850E_UART_CONSOLE,
-};
-
-
-static struct uart_port v850e_uart_ports[V850E_UART_NUM_CHANNELS];
-
-static int __init v850e_uart_init (void)
-{
-        int rval;
-
-        printk (KERN_INFO "%s on-chip UART\n", V850E_UART_CHIP_NAME);
-
-        rval = uart_register_driver (&v850e_uart_driver);
-        if (rval == 0) {
-                unsigned chan;
-
-                for (chan = 0; chan < V850E_UART_NUM_CHANNELS; chan++) {
-                        struct uart_port *port = &v850e_uart_ports[chan];
-                        
-                        memset (port, 0, sizeof *port);
-
-                        port->ops = &v850e_uart_ops;
-                        port->line = chan;
-                        port->iotype = UPIO_MEM;
-                        port->flags = UPF_BOOT_AUTOCONF;
-
-                        /* We actually use multiple IRQs, but the serial
-                           framework seems to mainly use this for
-                           informational purposes anyway.  Here we use the TX
-                           irq.  */
-                        port->irq = V850E_UART_TX_IRQ (chan);
-
-                        /* The serial framework doesn't really use these
-                           membase/mapbase fields for anything useful, but
-                           it requires that they be something non-zero to
-                           consider the port `valid', and also uses them
-                           for informational purposes.  */
-                        port->membase = (void *)V850E_UART_BASE_ADDR (chan);
-                        port->mapbase = V850E_UART_BASE_ADDR (chan);
-
-                        /* The framework insists on knowing the uart's master
-                           clock freq, though it doesn't seem to do anything
-                           useful for us with it.  We must make it at least
-                           higher than (the maximum baud rate * 16), otherwise
-                           the framework will puke during its internal
-                           calculations, and force the baud rate to be 9600.
-                           To be accurate though, just repeat the calculation
-                           we use when actually setting the speed.  */
-                        port->uartclk = v850e_uart_max_clock() * 16;
-
-                        uart_add_one_port (&v850e_uart_driver, port);
-                }
-        }
-
-        return rval;
-}
-
-static void __exit v850e_uart_exit (void)
-{
-        unsigned chan;
-
-        for (chan = 0; chan < V850E_UART_NUM_CHANNELS; chan++)
-                uart_remove_one_port (&v850e_uart_driver,
-                                      &v850e_uart_ports[chan]);
-
-        uart_unregister_driver (&v850e_uart_driver);
-}
-
-module_init (v850e_uart_init);
-module_exit (v850e_uart_exit);
-
-MODULE_AUTHOR ("Miles Bader");
-MODULE_DESCRIPTION ("NEC " V850E_UART_CHIP_NAME " on-chip UART");
-MODULE_LICENSE ("GPL");
diff --git a/drivers/sh/maple/maple.c b/drivers/sh/maple/maple.c
index 617efb1640b1..be97789fa5fd 100644
--- a/drivers/sh/maple/maple.c
+++ b/drivers/sh/maple/maple.c
@@ -24,13 +24,12 @@
 #include <linux/slab.h>
 #include <linux/maple.h>
 #include <linux/dma-mapping.h>
+#include <linux/delay.h>
 #include <asm/cacheflush.h>
 #include <asm/dma.h>
 #include <asm/io.h>
-#include <asm/mach/dma.h>
-#include <asm/mach/sysasic.h>
-#include <asm/mach/maple.h>
-#include <linux/delay.h>
+#include <mach/dma.h>
+#include <mach/sysasic.h>
 
 MODULE_AUTHOR("Yaegshi Takeshi, Paul Mundt, M.R. Brown, Adrian McMenamin");
 MODULE_DESCRIPTION("Maple bus driver for Dreamcast");
@@ -46,14 +45,15 @@ static DECLARE_WORK(maple_vblank_process, maple_vblank_handler);
 static LIST_HEAD(maple_waitq);
 static LIST_HEAD(maple_sentq);
 
-static DEFINE_MUTEX(maple_list_lock);
+/* mutex to protect queue of waiting packets */
+static DEFINE_MUTEX(maple_wlist_lock);
 
 static struct maple_driver maple_dummy_driver;
 static struct device maple_bus;
 static int subdevice_map[MAPLE_PORTS];
 static unsigned long *maple_sendbuf, *maple_sendptr, *maple_lastptr;
 static unsigned long maple_pnp_time;
-static int started, scanning, liststatus, fullscan;
+static int started, scanning, fullscan;
 static struct kmem_cache *maple_queue_cache;
 
 struct maple_device_specify {
@@ -129,35 +129,124 @@ static void maple_release_device(struct device *dev)
         kfree(mdev);
 }
 
-/**
+/*
  * maple_add_packet - add a single instruction to the queue
- * @mq: instruction to add to waiting queue
+ * @mdev - maple device
+ * @function - function on device being queried
+ * @command - maple command to add
+ * @length - length of command string (in 32 bit words)
+ * @data - remainder of command string
  */
-void maple_add_packet(struct mapleq *mq)
+int maple_add_packet(struct maple_device *mdev, u32 function, u32 command,
+        size_t length, void *data)
 {
-        mutex_lock(&maple_list_lock);
-        list_add(&mq->list, &maple_waitq);
-        mutex_unlock(&maple_list_lock);
+        int locking, ret = 0;
+        void *sendbuf = NULL;
+
+        mutex_lock(&maple_wlist_lock);
+        /* bounce if device already locked */
+        locking = mutex_is_locked(&mdev->mq->mutex);
+        if (locking) {
+                ret = -EBUSY;
+                goto out;
+        }
+
+        mutex_lock(&mdev->mq->mutex);
+
+        if (length) {
+                sendbuf = kmalloc(length * 4, GFP_KERNEL);
+                if (!sendbuf) {
+                        mutex_unlock(&mdev->mq->mutex);
+                        ret = -ENOMEM;
+                        goto out;
+                }
+                ((__be32 *)sendbuf)[0] = cpu_to_be32(function);
+        }
+
+        mdev->mq->command = command;
+        mdev->mq->length = length;
+        if (length > 1)
+                memcpy(sendbuf + 4, data, (length - 1) * 4);
+        mdev->mq->sendbuf = sendbuf;
+
+        list_add(&mdev->mq->list, &maple_waitq);
+out:
+        mutex_unlock(&maple_wlist_lock);
+        return ret;
 }
 EXPORT_SYMBOL_GPL(maple_add_packet);
 
+/*
+ * maple_add_packet_sleeps - add a single instruction to the queue
+ *  - waits for lock to be free
+ * @mdev - maple device
+ * @function - function on device being queried
+ * @command - maple command to add
+ * @length - length of command string (in 32 bit words)
+ * @data - remainder of command string
+ */
+int maple_add_packet_sleeps(struct maple_device *mdev, u32 function,
+        u32 command, size_t length, void *data)
+{
+        int locking, ret = 0;
+        void *sendbuf = NULL;
+
+        locking = mutex_lock_interruptible(&mdev->mq->mutex);
+        if (locking) {
+                ret = -EIO;
+                goto out;
+        }
+
+        if (length) {
+                sendbuf = kmalloc(length * 4, GFP_KERNEL);
+                if (!sendbuf) {
+                        mutex_unlock(&mdev->mq->mutex);
+                        ret = -ENOMEM;
+                        goto out;
+                }
+                ((__be32 *)sendbuf)[0] = cpu_to_be32(function);
+        }
+
+        mdev->mq->command = command;
+        mdev->mq->length = length;
+        if (length > 1)
+                memcpy(sendbuf + 4, data, (length - 1) * 4);
+        mdev->mq->sendbuf = sendbuf;
+
+        mutex_lock(&maple_wlist_lock);
+        list_add(&mdev->mq->list, &maple_waitq);
+        mutex_unlock(&maple_wlist_lock);
+out:
+        return ret;
+}
+EXPORT_SYMBOL_GPL(maple_add_packet_sleeps);
+
 static struct mapleq *maple_allocq(struct maple_device *mdev)
 {
         struct mapleq *mq;
 
         mq = kmalloc(sizeof(*mq), GFP_KERNEL);
         if (!mq)
-                return NULL;
+                goto failed_nomem;
 
         mq->dev = mdev;
         mq->recvbufdcsp = kmem_cache_zalloc(maple_queue_cache, GFP_KERNEL);
         mq->recvbuf = (void *) P2SEGADDR(mq->recvbufdcsp);
-        if (!mq->recvbuf) {
-                kfree(mq);
-                return NULL;
-        }
+        if (!mq->recvbuf)
+                goto failed_p2;
+        /*
+         * most devices do not need the mutex - but
+         * anything that injects block reads or writes
+         * will rely on it
+         */
+        mutex_init(&mq->mutex);
 
         return mq;
+
+failed_p2:
+        kfree(mq);
+failed_nomem:
+        return NULL;
 }
 
 static struct maple_device *maple_alloc_dev(int port, int unit)
@@ -178,7 +267,6 @@ static struct maple_device *maple_alloc_dev(int port, int unit)
         }
         mdev->dev.bus = &maple_bus_type;
         mdev->dev.parent = &maple_bus;
-        mdev->function = 0;
         return mdev;
 }
 
@@ -216,7 +304,6 @@ static void maple_build_block(struct mapleq *mq)
         *maple_sendptr++ = PHYSADDR(mq->recvbuf);
         *maple_sendptr++ =
             mq->command | (to << 8) | (from << 16) | (len << 24);
-
         while (len-- > 0)
                 *maple_sendptr++ = *lsendbuf++;
 }
@@ -224,22 +311,27 @@ static void maple_build_block(struct mapleq *mq)
 /* build up command queue */
 static void maple_send(void)
 {
-        int i;
-        int maple_packets;
+        int i, maple_packets = 0;
         struct mapleq *mq, *nmq;
 
         if (!list_empty(&maple_sentq))
                 return;
-        if (list_empty(&maple_waitq) || !maple_dma_done())
+        mutex_lock(&maple_wlist_lock);
+        if (list_empty(&maple_waitq) || !maple_dma_done()) {
+                mutex_unlock(&maple_wlist_lock);
                 return;
-        maple_packets = 0;
-        maple_sendptr = maple_lastptr = maple_sendbuf;
+        }
+        mutex_unlock(&maple_wlist_lock);
+        maple_lastptr = maple_sendbuf;
+        maple_sendptr = maple_sendbuf;
+        mutex_lock(&maple_wlist_lock);
         list_for_each_entry_safe(mq, nmq, &maple_waitq, list) {
                 maple_build_block(mq);
                 list_move(&mq->list, &maple_sentq);
                 if (maple_packets++ > MAPLE_MAXPACKETS)
                         break;
         }
+        mutex_unlock(&maple_wlist_lock);
         if (maple_packets > 0) {
                 for (i = 0; i < (1 << MAPLE_DMA_PAGES); i++)
                         dma_cache_sync(0, maple_sendbuf + i * PAGE_SIZE,
@@ -247,7 +339,8 @@ static void maple_send(void)
         }
 }
 
-static int attach_matching_maple_driver(struct device_driver *driver,
+/* check if there is a driver registered likely to match this device */
+static int check_matching_maple_driver(struct device_driver *driver,
                                         void *devptr)
 {
         struct maple_driver *maple_drv;
@@ -255,12 +348,8 @@ static int attach_matching_maple_driver(struct device_driver *driver,
 
         mdev = devptr;
         maple_drv = to_maple_driver(driver);
-        if (mdev->devinfo.function & be32_to_cpu(maple_drv->function)) {
-                if (maple_drv->connect(mdev) == 0) {
-                        mdev->driver = maple_drv;
-                        return 1;
-                }
-        }
+        if (mdev->devinfo.function & cpu_to_be32(maple_drv->function))
+                return 1;
         return 0;
 }
 
@@ -268,11 +357,6 @@ static void maple_detach_driver(struct maple_device *mdev)
 {
         if (!mdev)
                 return;
-        if (mdev->driver) {
-                if (mdev->driver->disconnect)
-                        mdev->driver->disconnect(mdev);
-        }
-        mdev->driver = NULL;
         device_unregister(&mdev->dev);
         mdev = NULL;
 }
@@ -328,8 +412,8 @@ static void maple_attach_driver(struct maple_device *mdev)
                         mdev->port, mdev->unit, function);
 
                 matched =
-                    bus_for_each_drv(&maple_bus_type, NULL, mdev,
-                                     attach_matching_maple_driver);
+                        bus_for_each_drv(&maple_bus_type, NULL, mdev,
+                                check_matching_maple_driver);
 
                 if (matched == 0) {
                         /* Driver does not exist yet */
@@ -373,45 +457,48 @@ static int detach_maple_device(struct device *device, void *portptr)
 
 static int setup_maple_commands(struct device *device, void *ignored)
 {
+        int add;
         struct maple_device *maple_dev = to_maple_dev(device);
 
         if ((maple_dev->interval > 0)
             && time_after(jiffies, maple_dev->when)) {
-                maple_dev->when = jiffies + maple_dev->interval;
-                maple_dev->mq->command = MAPLE_COMMAND_GETCOND;
-                maple_dev->mq->sendbuf = &maple_dev->function;
-                maple_dev->mq->length = 1;
-                maple_add_packet(maple_dev->mq);
-                liststatus++;
+                /* bounce if we cannot lock */
+                add = maple_add_packet(maple_dev,
+                        be32_to_cpu(maple_dev->devinfo.function),
+                        MAPLE_COMMAND_GETCOND, 1, NULL);
+                if (!add)
+                        maple_dev->when = jiffies + maple_dev->interval;
         } else {
-                if (time_after(jiffies, maple_pnp_time)) {
-                        maple_dev->mq->command = MAPLE_COMMAND_DEVINFO;
-                        maple_dev->mq->length = 0;
-                        maple_add_packet(maple_dev->mq);
-                        liststatus++;
-                }
+                if (time_after(jiffies, maple_pnp_time))
+                        /* This will also bounce */
+                        maple_add_packet(maple_dev, 0,
+                                MAPLE_COMMAND_DEVINFO, 0, NULL);
         }
-
         return 0;
 }
 
 /* VBLANK bottom half - implemented via workqueue */
 static void maple_vblank_handler(struct work_struct *work)
 {
-        if (!maple_dma_done())
-                return;
-        if (!list_empty(&maple_sentq))
+        if (!list_empty(&maple_sentq) || !maple_dma_done())
                 return;
+
         ctrl_outl(0, MAPLE_ENABLE);
-        liststatus = 0;
+
         bus_for_each_dev(&maple_bus_type, NULL, NULL,
                          setup_maple_commands);
+
         if (time_after(jiffies, maple_pnp_time))
                 maple_pnp_time = jiffies + MAPLE_PNP_INTERVAL;
-        if (liststatus && list_empty(&maple_sentq)) {
-                INIT_LIST_HEAD(&maple_sentq);
+
+        mutex_lock(&maple_wlist_lock);
+        if (!list_empty(&maple_waitq) && list_empty(&maple_sentq)) {
+                mutex_unlock(&maple_wlist_lock);
                 maple_send();
+        } else {
+                mutex_unlock(&maple_wlist_lock);
         }
+
         maplebus_dma_reset();
 }
 
@@ -422,8 +509,8 @@ static void maple_map_subunits(struct maple_device *mdev, int submask)
         struct maple_device *mdev_add;
         struct maple_device_specify ds;
 
+        ds.port = mdev->port;
         for (k = 0; k < 5; k++) {
-                ds.port = mdev->port;
                 ds.unit = k + 1;
                 retval =
                     bus_for_each_dev(&maple_bus_type, NULL, &ds,
@@ -437,9 +524,9 @@ static void maple_map_subunits(struct maple_device *mdev, int submask)
                         mdev_add = maple_alloc_dev(mdev->port, k + 1);
                         if (!mdev_add)
                                 return;
-                        mdev_add->mq->command = MAPLE_COMMAND_DEVINFO;
-                        mdev_add->mq->length = 0;
-                        maple_add_packet(mdev_add->mq);
+                        maple_add_packet(mdev_add, 0, MAPLE_COMMAND_DEVINFO,
+                                0, NULL);
+                        /* mark that we are checking sub devices */
                         scanning = 1;
                 }
                 submask = submask >> 1;
@@ -505,6 +592,28 @@ static void maple_response_devinfo(struct maple_device *mdev,
         }
 }
 
+static void maple_port_rescan(void)
+{
+        int i;
+        struct maple_device *mdev;
+
+        fullscan = 1;
+        for (i = 0; i < MAPLE_PORTS; i++) {
+                if (checked[i] == false) {
+                        fullscan = 0;
+                        mdev = baseunits[i];
+                        /*
+                         *  test lock in case scan has failed
+                         *  but device is still locked
+                         */
+                        if (mutex_is_locked(&mdev->mq->mutex))
+                                mutex_unlock(&mdev->mq->mutex);
+                        maple_add_packet(mdev, 0, MAPLE_COMMAND_DEVINFO,
+                                0, NULL);
+                }
+        }
+}
+
 /* maple dma end bottom half - implemented via workqueue */
 static void maple_dma_handler(struct work_struct *work)
 {
@@ -512,7 +621,6 @@ static void maple_dma_handler(struct work_struct *work)
         struct maple_device *dev;
         char *recvbuf;
         enum maple_code code;
-        int i;
 
         if (!maple_dma_done())
                 return;
@@ -522,6 +630,10 @@ static void maple_dma_handler(struct work_struct *work)
                         recvbuf = mq->recvbuf;
                         code = recvbuf[0];
                         dev = mq->dev;
+                        kfree(mq->sendbuf);
+                        mutex_unlock(&mq->mutex);
+                        list_del_init(&mq->list);
+
                         switch (code) {
                         case MAPLE_RESPONSE_NONE:
                                 maple_response_none(dev, mq);
@@ -558,26 +670,16 @@ static void maple_dma_handler(struct work_struct *work)
                                 break;
                         }
                 }
-                INIT_LIST_HEAD(&maple_sentq);
+                /* if scanning is 1 then we have subdevices to check */
                 if (scanning == 1) {
                         maple_send();
                         scanning = 2;
                 } else
                         scanning = 0;
-
-                if (!fullscan) {
-                        fullscan = 1;
-                        for (i = 0; i < MAPLE_PORTS; i++) {
-                                if (checked[i] == false) {
-                                        fullscan = 0;
-                                        dev = baseunits[i];
-                                        dev->mq->command =
-                                                MAPLE_COMMAND_DEVINFO;
-                                        dev->mq->length = 0;
-                                        maple_add_packet(dev->mq);
-                                }
-                        }
-                }
+                /*check if we have actually tested all ports yet */
+                if (!fullscan)
+                        maple_port_rescan();
+                /* mark that we have been through the first scan */
                 if (started == 0)
                         started = 1;
         }
@@ -631,7 +733,7 @@ static int match_maple_bus_driver(struct device *devptr,
         if (maple_dev->devinfo.function == 0xFFFFFFFF)
                 return 0;
         else if (maple_dev->devinfo.function &
-                 be32_to_cpu(maple_drv->function))
+                 cpu_to_be32(maple_drv->function))
                 return 1;
         return 0;
 }
@@ -713,6 +815,9 @@ static int __init maple_bus_init(void)
         if (!maple_queue_cache)
                 goto cleanup_bothirqs;
 
+        INIT_LIST_HEAD(&maple_waitq);
+        INIT_LIST_HEAD(&maple_sentq);
+
         /* setup maple ports */
         for (i = 0; i < MAPLE_PORTS; i++) {
                 checked[i] = false;
@@ -723,9 +828,7 @@ static int __init maple_bus_init(void)
                                 maple_free_dev(mdev[i]);
                         goto cleanup_cache;
                 }
-                mdev[i]->mq->command = MAPLE_COMMAND_DEVINFO;
-                mdev[i]->mq->length = 0;
-                maple_add_packet(mdev[i]->mq);
+                maple_add_packet(mdev[i], 0, MAPLE_COMMAND_DEVINFO, 0, NULL);
                 subdevice_map[i] = 0;
         }
 
diff --git a/drivers/spi/mpc52xx_psc_spi.c b/drivers/spi/mpc52xx_psc_spi.c
index 604e5f0a2d95..25eda71f4bf4 100644
--- a/drivers/spi/mpc52xx_psc_spi.c
+++ b/drivers/spi/mpc52xx_psc_spi.c
@@ -148,7 +148,6 @@ static int mpc52xx_psc_spi_transfer_rxtx(struct spi_device *spi,
         unsigned rfalarm;
         unsigned send_at_once = MPC52xx_PSC_BUFSIZE;
         unsigned recv_at_once;
-        unsigned bpw = mps->bits_per_word / 8;
 
         if (!t->tx_buf && !t->rx_buf && t->len)
                 return -EINVAL;
@@ -164,22 +163,15 @@ static int mpc52xx_psc_spi_transfer_rxtx(struct spi_device *spi,
                 }
 
                 dev_dbg(&spi->dev, "send %d bytes...\n", send_at_once);
-                if (tx_buf) {
-                        for (; send_at_once; sb++, send_at_once--) {
-                                /* set EOF flag */
-                                if (mps->bits_per_word
-                                                && (sb + 1) % bpw == 0)
-                                        out_8(&psc->ircr2, 0x01);
+                for (; send_at_once; sb++, send_at_once--) {
+                        /* set EOF flag before the last word is sent */
+                        if (send_at_once == 1)
+                                out_8(&psc->ircr2, 0x01);
+
+                        if (tx_buf)
                                 out_8(&psc->mpc52xx_psc_buffer_8, tx_buf[sb]);
-                        }
-                } else {
-                        for (; send_at_once; sb++, send_at_once--) {
-                                /* set EOF flag */
-                                if (mps->bits_per_word
-                                                && ((sb + 1) % bpw) == 0)
-                                        out_8(&psc->ircr2, 0x01);
+                        else
                                 out_8(&psc->mpc52xx_psc_buffer_8, 0);
-                        }
                 }
 
 
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index ecca4a6a6f94..964124b60db2 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -178,6 +178,96 @@ struct boardinfo {
 static LIST_HEAD(board_list);
 static DEFINE_MUTEX(board_lock);
 
+/**
+ * spi_alloc_device - Allocate a new SPI device
+ * @master: Controller to which device is connected
+ * Context: can sleep
+ *
+ * Allows a driver to allocate and initialize a spi_device without
+ * registering it immediately.  This allows a driver to directly
+ * fill the spi_device with device parameters before calling
+ * spi_add_device() on it.
+ *
+ * Caller is responsible to call spi_add_device() on the returned
+ * spi_device structure to add it to the SPI master.  If the caller
+ * needs to discard the spi_device without adding it, then it should
+ * call spi_dev_put() on it.
+ *
+ * Returns a pointer to the new device, or NULL.
+ */
+struct spi_device *spi_alloc_device(struct spi_master *master)
+{
+        struct spi_device       *spi;
+        struct device           *dev = master->dev.parent;
+
+        if (!spi_master_get(master))
+                return NULL;
+
+        spi = kzalloc(sizeof *spi, GFP_KERNEL);
+        if (!spi) {
+                dev_err(dev, "cannot alloc spi_device\n");
+                spi_master_put(master);
+                return NULL;
+        }
+
+        spi->master = master;
+        spi->dev.parent = dev;
+        spi->dev.bus = &spi_bus_type;
+        spi->dev.release = spidev_release;
+        device_initialize(&spi->dev);
+        return spi;
+}
+EXPORT_SYMBOL_GPL(spi_alloc_device);
+
+/**
+ * spi_add_device - Add spi_device allocated with spi_alloc_device
+ * @spi: spi_device to register
+ *
+ * Companion function to spi_alloc_device.  Devices allocated with
+ * spi_alloc_device can be added onto the spi bus with this function.
+ *
+ * Returns 0 on success; non-zero on failure
+ */
+int spi_add_device(struct spi_device *spi)
+{
+        struct device *dev = spi->master->dev.parent;
+        int status;
+
+        /* Chipselects are numbered 0..max; validate. */
+        if (spi->chip_select >= spi->master->num_chipselect) {
+                dev_err(dev, "cs%d >= max %d\n",
+                        spi->chip_select,
+                        spi->master->num_chipselect);
+                return -EINVAL;
+        }
+
+        /* Set the bus ID string */
+        snprintf(spi->dev.bus_id, sizeof spi->dev.bus_id,
+                        "%s.%u", spi->master->dev.bus_id,
+                        spi->chip_select);
+
+        /* drivers may modify this initial i/o setup */
+        status = spi->master->setup(spi);
+        if (status < 0) {
+                dev_err(dev, "can't %s %s, status %d\n",
+                                "setup", spi->dev.bus_id, status);
+                return status;
+        }
+
+        /* driver core catches callers that misbehave by defining
+         * devices that already exist.
+         */
+        status = device_add(&spi->dev);
+        if (status < 0) {
+                dev_err(dev, "can't %s %s, status %d\n",
+                                "add", spi->dev.bus_id, status);
+                return status;
+        }
+
+        dev_dbg(dev, "registered child %s\n", spi->dev.bus_id);
+        return 0;
+}
+EXPORT_SYMBOL_GPL(spi_add_device);
 
 /**
  * spi_new_device - instantiate one new SPI device
@@ -197,7 +287,6 @@ struct spi_device *spi_new_device(struct spi_master *master,
                                   struct spi_board_info *chip)
 {
         struct spi_device       *proxy;
-        struct device           *dev = master->dev.parent;
         int                     status;
 
         /* NOTE:  caller did any chip->bus_num checks necessary.
@@ -207,66 +296,28 @@ struct spi_device *spi_new_device(struct spi_master *master,
          * suggests syslogged diagnostics are best here (ugh).
          */
 
-        /* Chipselects are numbered 0..max; validate. */
-        if (chip->chip_select >= master->num_chipselect) {
-                dev_err(dev, "cs%d > max %d\n",
-                        chip->chip_select,
-                        master->num_chipselect);
-                return NULL;
-        }
-
-        if (!spi_master_get(master))
+        proxy = spi_alloc_device(master);
+        if (!proxy)
                 return NULL;
 
         WARN_ON(strlen(chip->modalias) >= sizeof(proxy->modalias));
 
-        proxy = kzalloc(sizeof *proxy, GFP_KERNEL);
-        if (!proxy) {
-                dev_err(dev, "can't alloc dev for cs%d\n",
-                        chip->chip_select);
-                goto fail;
-        }
-        proxy->master = master;
         proxy->chip_select = chip->chip_select;
         proxy->max_speed_hz = chip->max_speed_hz;
         proxy->mode = chip->mode;
         proxy->irq = chip->irq;
         strlcpy(proxy->modalias, chip->modalias, sizeof(proxy->modalias));
-
-        snprintf(proxy->dev.bus_id, sizeof proxy->dev.bus_id,
-                        "%s.%u", master->dev.bus_id,
-                        chip->chip_select);
-        proxy->dev.parent = dev;
-        proxy->dev.bus = &spi_bus_type;
         proxy->dev.platform_data = (void *) chip->platform_data;
         proxy->controller_data = chip->controller_data;
         proxy->controller_state = NULL;
-        proxy->dev.release = spidev_release;
 
-        /* drivers may modify this initial i/o setup */
-        status = master->setup(proxy);
+        status = spi_add_device(proxy);
         if (status < 0) {
-                dev_err(dev, "can't %s %s, status %d\n",
-                                "setup", proxy->dev.bus_id, status);
-                goto fail;
+                spi_dev_put(proxy);
+                return NULL;
         }
 
-        /* driver core catches callers that misbehave by defining
-         * devices that already exist.
-         */
-        status = device_register(&proxy->dev);
-        if (status < 0) {
-                dev_err(dev, "can't %s %s, status %d\n",
-                                "add", proxy->dev.bus_id, status);
-                goto fail;
-        }
-        dev_dbg(dev, "registered child %s\n", proxy->dev.bus_id);
         return proxy;
-
-fail:
-        spi_master_put(master);
-        kfree(proxy);
-        return NULL;
 }
 EXPORT_SYMBOL_GPL(spi_new_device);
 
diff --git a/drivers/spi/spi_s3c24xx.c b/drivers/spi/spi_s3c24xx.c
index 0885cc357a37..1c643c9e1f15 100644
--- a/drivers/spi/spi_s3c24xx.c
+++ b/drivers/spi/spi_s3c24xx.c
@@ -270,6 +270,7 @@ static int __init s3c24xx_spi_probe(struct platform_device *pdev)
         /* setup the master state. */
 
         master->num_chipselect = hw->pdata->num_cs;
+        master->bus_num = pdata->bus_num;
 
         /* setup the state for the bitbang driver */
 
diff --git a/drivers/usb/gadget/m66592-udc.c b/drivers/usb/gadget/m66592-udc.c
index 8da7535c0c70..77b44fb48f0a 100644
--- a/drivers/usb/gadget/m66592-udc.c
+++ b/drivers/usb/gadget/m66592-udc.c
@@ -1593,7 +1593,7 @@ static int __init m66592_probe(struct platform_device *pdev)
 
         m66592->gadget.ops = &m66592_gadget_ops;
         device_initialize(&m66592->gadget.dev);
-        dev_set_name(&m66592->gadget, "gadget");
+        dev_set_name(&m66592->gadget.dev, "gadget");
         m66592->gadget.is_dualspeed = 1;
         m66592->gadget.dev.parent = &pdev->dev;
         m66592->gadget.dev.dma_mask = pdev->dev.dma_mask;
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 0ebc1bfd2514..a6b55297a7fb 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -118,7 +118,6 @@ obj-$(CONFIG_FB_PS3)		  += ps3fb.o
 obj-$(CONFIG_FB_SM501)            += sm501fb.o
 obj-$(CONFIG_FB_XILINX)           += xilinxfb.o
 obj-$(CONFIG_FB_SH_MOBILE_LCDC)   += sh_mobile_lcdcfb.o
-obj-$(CONFIG_FB_SH7343VOU)        += sh7343_voufb.o
 obj-$(CONFIG_FB_OMAP)             += omap/
 obj-$(CONFIG_XEN_FBDEV_FRONTEND)  += xen-fbfront.o
 obj-$(CONFIG_FB_CARMINE)          += carminefb.o
diff --git a/drivers/video/arkfb.c b/drivers/video/arkfb.c
index 5001bd4ef466..38a1e8308c83 100644
--- a/drivers/video/arkfb.c
+++ b/drivers/video/arkfb.c
@@ -1126,11 +1126,8 @@ static int ark_pci_resume (struct pci_dev* dev)
         acquire_console_sem();
         mutex_lock(&(par->open_lock));
 
-        if (par->ref_count == 0) {
-                mutex_unlock(&(par->open_lock));
-                release_console_sem();
-                return 0;
-        }
+        if (par->ref_count == 0)
+                goto fail;
 
         pci_set_power_state(dev, PCI_D0);
         pci_restore_state(dev);
@@ -1143,8 +1140,8 @@ static int ark_pci_resume (struct pci_dev* dev)
         arkfb_set_par(info);
         fb_set_suspend(info, 0);
 
-        mutex_unlock(&(par->open_lock));
 fail:
+        mutex_unlock(&(par->open_lock));
         release_console_sem();
         return 0;
 }
diff --git a/drivers/video/backlight/hp680_bl.c b/drivers/video/backlight/hp680_bl.c
index fbea2bd129c7..6fa0b9d5559a 100644
--- a/drivers/video/backlight/hp680_bl.c
+++ b/drivers/video/backlight/hp680_bl.c
@@ -18,7 +18,7 @@
 #include <linux/fb.h>
 #include <linux/backlight.h>
 
-#include <asm/cpu/dac.h>
+#include <cpu/dac.h>
 #include <asm/hp6xx.h>
 #include <asm/hd64461.h>
 
diff --git a/drivers/video/backlight/platform_lcd.c b/drivers/video/backlight/platform_lcd.c
index 72d44dbfce82..738694d23889 100644
--- a/drivers/video/backlight/platform_lcd.c
+++ b/drivers/video/backlight/platform_lcd.c
@@ -92,7 +92,7 @@ static int __devinit platform_lcd_probe(struct platform_device *pdev)
 
         plcd->us = dev;
         plcd->pdata = pdata;
-        plcd->lcd = lcd_device_register("platform-lcd", dev,
+        plcd->lcd = lcd_device_register(dev_name(dev), dev,
                                         plcd, &platform_lcd_ops);
         if (IS_ERR(plcd->lcd)) {
                 dev_err(dev, "cannot register lcd device\n");
@@ -101,6 +101,8 @@ static int __devinit platform_lcd_probe(struct platform_device *pdev)
         }
 
         platform_set_drvdata(pdev, plcd);
+        platform_lcd_set_power(plcd->lcd, FB_BLANK_NORMAL);
+
         return 0;
 
  err_mem:
diff --git a/drivers/video/console/sticore.c b/drivers/video/console/sticore.c
index d7822af0e00a..ef7870f5ea08 100644
--- a/drivers/video/console/sticore.c
+++ b/drivers/video/console/sticore.c
@@ -24,6 +24,7 @@
 #include <asm/hardware.h>
 #include <asm/parisc-device.h>
 #include <asm/cacheflush.h>
+#include <asm/grfioctl.h>
 
 #include "../sticore.h"
 
@@ -725,6 +726,7 @@ static int __devinit sti_read_rom(int wordmode, struct sti_struct *sti,
 {
         struct sti_cooked_rom *cooked;
         struct sti_rom *raw = NULL;
+        unsigned long revno;
 
         cooked = kmalloc(sizeof *cooked, GFP_KERNEL);
         if (!cooked)
@@ -767,9 +769,35 @@ static int __devinit sti_read_rom(int wordmode, struct sti_struct *sti,
         sti->graphics_id[1] = raw->graphics_id[1];
         
         sti_dump_rom(raw);
-        
+
+        /* check if the ROM routines in this card are compatible */
+        if (wordmode || sti->graphics_id[1] != 0x09A02587)
+                goto ok;
+
+        revno = (raw->revno[0] << 8) | raw->revno[1];
+
+        switch (sti->graphics_id[0]) {
+        case S9000_ID_HCRX:
+                /* HyperA or HyperB ? */
+                if (revno == 0x8408 || revno == 0x840b)
+                        goto msg_not_supported;
+                break;
+        case CRT_ID_THUNDER:
+                if (revno == 0x8509)
+                        goto msg_not_supported;
+                break;
+        case CRT_ID_THUNDER2:
+                if (revno == 0x850c)
+                        goto msg_not_supported;
+        }
+ok:
         return 1;
 
+msg_not_supported:
+        printk(KERN_ERR "Sorry, this GSC/STI card is not yet supported.\n");
+        printk(KERN_ERR "Please see http://parisc-linux.org/faq/"
+                        "graphics-howto.html for more info.\n");
+        /* fall through */
 out_err:
         kfree(raw);
         kfree(cooked);
diff --git a/drivers/video/gbefb.c b/drivers/video/gbefb.c
index 2e552d5bbb5d..f89c3cce1e0c 100644
--- a/drivers/video/gbefb.c
+++ b/drivers/video/gbefb.c
@@ -87,6 +87,8 @@ static int gbe_revision;
 static int ypan, ywrap;
 
 static uint32_t pseudo_palette[16];
+static uint32_t gbe_cmap[256];
+static int gbe_turned_on; /* 0 turned off, 1 turned on */
 
 static char *mode_option __initdata = NULL;
 
@@ -208,6 +210,8 @@ void gbe_turn_off(void)
         int i;
         unsigned int val, x, y, vpixen_off;
 
+        gbe_turned_on = 0;
+
         /* check if pixel counter is on */
         val = gbe->vt_xy;
         if (GET_GBE_FIELD(VT_XY, FREEZE, val) == 1)
@@ -371,6 +375,22 @@ static void gbe_turn_on(void)
         }
         if (i == 10000)
                 printk(KERN_ERR "gbefb: turn on DMA timed out\n");
+
+        gbe_turned_on = 1;
+}
+
+static void gbe_loadcmap(void)
+{
+        int i, j;
+
+        for (i = 0; i < 256; i++) {
+                for (j = 0; j < 1000 && gbe->cm_fifo >= 63; j++)
+                        udelay(10);
+                if (j == 1000)
+                        printk(KERN_ERR "gbefb: cmap FIFO timeout\n");
+
+                gbe->cmap[i] = gbe_cmap[i];
+        }
 }
 
 /*
@@ -382,6 +402,7 @@ static int gbefb_blank(int blank, struct fb_info *info)
         switch (blank) {
         case FB_BLANK_UNBLANK:          /* unblank */
                 gbe_turn_on();
+                gbe_loadcmap();
                 break;
 
         case FB_BLANK_NORMAL:           /* blank */
@@ -796,16 +817,10 @@ static int gbefb_set_par(struct fb_info *info)
                 gbe->gmap[i] = (i << 24) | (i << 16) | (i << 8);
 
         /* Initialize the color map */
-        for (i = 0; i < 256; i++) {
-                int j;
-
-                for (j = 0; j < 1000 && gbe->cm_fifo >= 63; j++)
-                        udelay(10);
-                if (j == 1000)
-                        printk(KERN_ERR "gbefb: cmap FIFO timeout\n");
+        for (i = 0; i < 256; i++)
+                gbe_cmap[i] = (i << 8) | (i << 16) | (i << 24);
 
-                gbe->cmap[i] = (i << 8) | (i << 16) | (i << 24);
-        }
+        gbe_loadcmap();
 
         return 0;
 }
@@ -855,14 +870,17 @@ static int gbefb_setcolreg(unsigned regno, unsigned red, unsigned green,
         blue >>= 8;
 
         if (info->var.bits_per_pixel <= 8) {
-                /* wait for the color map FIFO to have a free entry */
-                for (i = 0; i < 1000 && gbe->cm_fifo >= 63; i++)
-                        udelay(10);
-                if (i == 1000) {
-                        printk(KERN_ERR "gbefb: cmap FIFO timeout\n");
-                        return 1;
+                gbe_cmap[regno] = (red << 24) | (green << 16) | (blue << 8);
+                if (gbe_turned_on) {
+                        /* wait for the color map FIFO to have a free entry */
+                        for (i = 0; i < 1000 && gbe->cm_fifo >= 63; i++)
+                                udelay(10);
+                        if (i == 1000) {
+                                printk(KERN_ERR "gbefb: cmap FIFO timeout\n");
+                                return 1;
+                        }
+                        gbe->cmap[regno] = gbe_cmap[regno];
                 }
-                gbe->cmap[regno] = (red << 24) | (green << 16) | (blue << 8);
         } else if (regno < 16) {
                 switch (info->var.bits_per_pixel) {
                 case 15:
diff --git a/drivers/video/hitfb.c b/drivers/video/hitfb.c
index 392a8be6aa76..e6467cf9f19f 100644
--- a/drivers/video/hitfb.c
+++ b/drivers/video/hitfb.c
@@ -27,7 +27,7 @@
 #include <asm/pgtable.h>
 #include <asm/io.h>
 #include <asm/hd64461.h>
-#include <asm/cpu/dac.h>
+#include <cpu/dac.h>
 
 #define WIDTH 640
 
diff --git a/drivers/video/pvr2fb.c b/drivers/video/pvr2fb.c
index 8c863a7f654b..0a0fd48a8566 100644
--- a/drivers/video/pvr2fb.c
+++ b/drivers/video/pvr2fb.c
@@ -58,18 +58,18 @@
 
 #ifdef CONFIG_SH_DREAMCAST
 #include <asm/machvec.h>
-#include <asm/mach/sysasic.h>
+#include <mach-dreamcast/mach/sysasic.h>
 #endif
 
 #ifdef CONFIG_SH_DMA
 #include <linux/pagemap.h>
-#include <asm/mach/dma.h>
+#include <mach/dma.h>
 #include <asm/dma.h>
 #endif
 
 #ifdef CONFIG_SH_STORE_QUEUES
 #include <linux/uaccess.h>
-#include <asm/cpu/sq.h>
+#include <cpu/sq.h>
 #endif
 
 #ifndef PCI_DEVICE_ID_NEC_NEON250
diff --git a/drivers/video/sh7760fb.c b/drivers/video/sh7760fb.c
index 4d0e28c5790b..8d0212da4514 100644
--- a/drivers/video/sh7760fb.c
+++ b/drivers/video/sh7760fb.c
@@ -152,6 +152,7 @@ static int sh7760fb_setcmap(struct fb_cmap *cmap, struct fb_info *info)
                 col |= ((*g) & 0xff) << 8;
                 col |= ((*b) & 0xff);
                 col &= SH7760FB_PALETTE_MASK;
+                iowrite32(col, par->base + LDPR(s));
 
                 if (s < 16)
                         ((u32 *) (info->pseudo_palette))[s] = s;
diff --git a/drivers/video/vt8623fb.c b/drivers/video/vt8623fb.c
index 536ab11623f0..4a484ee98f8a 100644
--- a/drivers/video/vt8623fb.c
+++ b/drivers/video/vt8623fb.c
@@ -853,11 +853,8 @@ static int vt8623_pci_resume(struct pci_dev* dev)
         acquire_console_sem();
         mutex_lock(&(par->open_lock));
 
-        if (par->ref_count == 0) {
-                mutex_unlock(&(par->open_lock));
-                release_console_sem();
-                return 0;
-        }
+        if (par->ref_count == 0)
+                goto fail;
 
         pci_set_power_state(dev, PCI_D0);
         pci_restore_state(dev);
@@ -870,8 +867,8 @@ static int vt8623_pci_resume(struct pci_dev* dev)
         vt8623fb_set_par(info);
         fb_set_suspend(info, 0);
 
-        mutex_unlock(&(par->open_lock));
 fail:
+        mutex_unlock(&(par->open_lock));
         release_console_sem();
 
         return 0;
diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c
index eaa3f2a79ff5..ccd6c530782d 100644
--- a/drivers/watchdog/hpwdt.c
+++ b/drivers/watchdog/hpwdt.c
@@ -420,7 +420,7 @@ static int __devinit detect_cru_service(void)
 static int hpwdt_pretimeout(struct notifier_block *nb, unsigned long ulReason,
                             void *data)
 {
-        static unsigned long rom_pl;
+        unsigned long rom_pl;
         static int die_nmi_called;
 
         if (ulReason != DIE_NMI && ulReason != DIE_NMI_IPI)
diff --git a/fs/Kconfig.binfmt b/fs/Kconfig.binfmt
index 3263084eef9e..4a551af6f3fc 100644
--- a/fs/Kconfig.binfmt
+++ b/fs/Kconfig.binfmt
@@ -30,7 +30,7 @@ config COMPAT_BINFMT_ELF
 config BINFMT_ELF_FDPIC
         bool "Kernel support for FDPIC ELF binaries"
         default y
-        depends on (FRV || BLACKFIN)
+        depends on (FRV || BLACKFIN || (SUPERH32 && !MMU))
         help
           ELF FDPIC binaries are based on ELF, but allow the individual load
           segments of a binary to be located in memory independently of each
diff --git a/fs/afs/mntpt.c b/fs/afs/mntpt.c
index 2f5503902c37..78db4953a800 100644
--- a/fs/afs/mntpt.c
+++ b/fs/afs/mntpt.c
@@ -232,7 +232,7 @@ static void *afs_mntpt_follow_link(struct dentry *dentry, struct nameidata *nd)
         }
 
         mntget(newmnt);
-        err = do_add_mount(newmnt, nd, MNT_SHRINKABLE, &afs_vfsmounts);
+        err = do_add_mount(newmnt, &nd->path, MNT_SHRINKABLE, &afs_vfsmounts);
         switch (err) {
         case 0:
                 path_put(&nd->path);
diff --git a/fs/binfmt_elf_fdpic.c b/fs/binfmt_elf_fdpic.c
index fdeadab2f18b..80c1f952ef78 100644
--- a/fs/binfmt_elf_fdpic.c
+++ b/fs/binfmt_elf_fdpic.c
@@ -470,6 +470,7 @@ static int create_elf_fdpic_tables(struct linux_binprm *bprm,
         char __user *u_platform, *p;
         long hwcap;
         int loop;
+        int nr; /* reset for each csp adjustment */
 
         /* we're going to shovel a whole load of stuff onto the stack */
 #ifdef CONFIG_MMU
@@ -542,10 +543,7 @@ static int create_elf_fdpic_tables(struct linux_binprm *bprm,
         /* force 16 byte _final_ alignment here for generality */
 #define DLINFO_ITEMS 13
 
-        nitems = 1 + DLINFO_ITEMS + (k_platform ? 1 : 0);
-#ifdef DLINFO_ARCH_ITEMS
-        nitems += DLINFO_ARCH_ITEMS;
-#endif
+        nitems = 1 + DLINFO_ITEMS + (k_platform ? 1 : 0) + AT_VECTOR_SIZE_ARCH;
 
         csp = sp;
         sp -= nitems * 2 * sizeof(unsigned long);
@@ -557,39 +555,46 @@ static int create_elf_fdpic_tables(struct linux_binprm *bprm,
         sp -= sp & 15UL;
 
         /* put the ELF interpreter info on the stack */
-#define NEW_AUX_ENT(nr, id, val)                                        \
+#define NEW_AUX_ENT(id, val)                                            \
         do {                                                            \
                 struct { unsigned long _id, _val; } __user *ent;        \
                                                                         \
                 ent = (void __user *) csp;                              \
                 __put_user((id), &ent[nr]._id);                         \
                 __put_user((val), &ent[nr]._val);                       \
+                nr++;                                                   \
         } while (0)
 
+        nr = 0;
         csp -= 2 * sizeof(unsigned long);
-        NEW_AUX_ENT(0, AT_NULL, 0);
+        NEW_AUX_ENT(AT_NULL, 0);
         if (k_platform) {
+                nr = 0;
                 csp -= 2 * sizeof(unsigned long);
-                NEW_AUX_ENT(0, AT_PLATFORM,
+                NEW_AUX_ENT(AT_PLATFORM,
                             (elf_addr_t) (unsigned long) u_platform);
         }
 
+        nr = 0;
         csp -= DLINFO_ITEMS * 2 * sizeof(unsigned long);
-        NEW_AUX_ENT( 0, AT_HWCAP,       hwcap);
-        NEW_AUX_ENT( 1, AT_PAGESZ,      PAGE_SIZE);
-        NEW_AUX_ENT( 2, AT_CLKTCK,      CLOCKS_PER_SEC);
-        NEW_AUX_ENT( 3, AT_PHDR,        exec_params->ph_addr);
-        NEW_AUX_ENT( 4, AT_PHENT,       sizeof(struct elf_phdr));
-        NEW_AUX_ENT( 5, AT_PHNUM,       exec_params->hdr.e_phnum);
-        NEW_AUX_ENT( 6, AT_BASE,        interp_params->elfhdr_addr);
-        NEW_AUX_ENT( 7, AT_FLAGS,       0);
-        NEW_AUX_ENT( 8, AT_ENTRY,       exec_params->entry_addr);
-        NEW_AUX_ENT( 9, AT_UID,         (elf_addr_t) current->uid);
-        NEW_AUX_ENT(10, AT_EUID,        (elf_addr_t) current->euid);
-        NEW_AUX_ENT(11, AT_GID,         (elf_addr_t) current->gid);
-        NEW_AUX_ENT(12, AT_EGID,        (elf_addr_t) current->egid);
+        NEW_AUX_ENT(AT_HWCAP,   hwcap);
+        NEW_AUX_ENT(AT_PAGESZ,  PAGE_SIZE);
+        NEW_AUX_ENT(AT_CLKTCK,  CLOCKS_PER_SEC);
+        NEW_AUX_ENT(AT_PHDR,    exec_params->ph_addr);
+        NEW_AUX_ENT(AT_PHENT,   sizeof(struct elf_phdr));
+        NEW_AUX_ENT(AT_PHNUM,   exec_params->hdr.e_phnum);
+        NEW_AUX_ENT(AT_BASE,    interp_params->elfhdr_addr);
+        NEW_AUX_ENT(AT_FLAGS,   0);
+        NEW_AUX_ENT(AT_ENTRY,   exec_params->entry_addr);
+        NEW_AUX_ENT(AT_UID,     (elf_addr_t) current->uid);
+        NEW_AUX_ENT(AT_EUID,    (elf_addr_t) current->euid);
+        NEW_AUX_ENT(AT_GID,     (elf_addr_t) current->gid);
+        NEW_AUX_ENT(AT_EGID,    (elf_addr_t) current->egid);
 
 #ifdef ARCH_DLINFO
+        nr = 0;
+        csp -= AT_VECTOR_SIZE_ARCH * 2 * sizeof(unsigned long);
+
         /* ARCH_DLINFO must come last so platform specific code can enforce
          * special alignment requirements on the AUXV if necessary (eg. PPC).
          */
diff --git a/fs/bio-integrity.c b/fs/bio-integrity.c
index 63e2ee63058d..c3e174b35fe6 100644
--- a/fs/bio-integrity.c
+++ b/fs/bio-integrity.c
@@ -705,7 +705,6 @@ void __init bio_integrity_init_slab(void)
         bio_integrity_slab = KMEM_CACHE(bio_integrity_payload,
                                         SLAB_HWCACHE_ALIGN|SLAB_PANIC);
 }
-EXPORT_SYMBOL(bio_integrity_init_slab);
 
 static int __init integrity_init(void)
 {
diff --git a/fs/block_dev.c b/fs/block_dev.c
index dcf37cada369..aff54219e049 100644
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -941,8 +941,10 @@ static int do_open(struct block_device *bdev, struct file *file, int for_part)
          * hooks: /n/, see "layering violations".
          */
         ret = devcgroup_inode_permission(bdev->bd_inode, perm);
-        if (ret != 0)
+        if (ret != 0) {
+                bdput(bdev);
                 return ret;
+        }
 
         ret = -ENXIO;
         file->f_mapping = bdev->bd_inode->i_mapping;
@@ -1234,6 +1236,7 @@ fail:
         bdev = ERR_PTR(error);
         goto out;
 }
+EXPORT_SYMBOL(lookup_bdev);
 
 /**
  * open_bdev_excl  -  open a block device by name and set it up for use
diff --git a/fs/buffer.c b/fs/buffer.c
index f95805019639..4dbe52948e8f 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -580,7 +580,7 @@ EXPORT_SYMBOL(mark_buffer_async_write);
 /*
  * The buffer's backing address_space's private_lock must be held
  */
-static inline void __remove_assoc_queue(struct buffer_head *bh)
+static void __remove_assoc_queue(struct buffer_head *bh)
 {
         list_del_init(&bh->b_assoc_buffers);
         WARN_ON(!bh->b_assoc_map);
@@ -2096,6 +2096,52 @@ int generic_write_end(struct file *file, struct address_space *mapping,
 EXPORT_SYMBOL(generic_write_end);
 
 /*
+ * block_is_partially_uptodate checks whether buffers within a page are
+ * uptodate or not.
+ *
+ * Returns true if all buffers which correspond to a file portion
+ * we want to read are uptodate.
+ */
+int block_is_partially_uptodate(struct page *page, read_descriptor_t *desc,
+                                        unsigned long from)
+{
+        struct inode *inode = page->mapping->host;
+        unsigned block_start, block_end, blocksize;
+        unsigned to;
+        struct buffer_head *bh, *head;
+        int ret = 1;
+
+        if (!page_has_buffers(page))
+                return 0;
+
+        blocksize = 1 << inode->i_blkbits;
+        to = min_t(unsigned, PAGE_CACHE_SIZE - from, desc->count);
+        to = from + to;
+        if (from < blocksize && to > PAGE_CACHE_SIZE - blocksize)
+                return 0;
+
+        head = page_buffers(page);
+        bh = head;
+        block_start = 0;
+        do {
+                block_end = block_start + blocksize;
+                if (block_end > from && block_start < to) {
+                        if (!buffer_uptodate(bh)) {
+                                ret = 0;
+                                break;
+                        }
+                        if (block_end >= to)
+                                break;
+                }
+                block_start = block_end;
+                bh = bh->b_this_page;
+        } while (bh != head);
+
+        return ret;
+}
+EXPORT_SYMBOL(block_is_partially_uptodate);
+
+/*
  * Generic "read page" function for block devices that have the normal
  * get_block functionality. This is most of the block device filesystems.
  * Reads the page asynchronously --- the unlock_buffer() and
diff --git a/fs/cifs/cifs_dfs_ref.c b/fs/cifs/cifs_dfs_ref.c
index d82374c9e329..d2c8eef84f3c 100644
--- a/fs/cifs/cifs_dfs_ref.c
+++ b/fs/cifs/cifs_dfs_ref.c
@@ -226,7 +226,7 @@ static int add_mount_helper(struct vfsmount *newmnt, struct nameidata *nd,
         int err;
 
         mntget(newmnt);
-        err = do_add_mount(newmnt, nd, nd->path.mnt->mnt_flags, mntlist);
+        err = do_add_mount(newmnt, &nd->path, nd->path.mnt->mnt_flags, mntlist);
         switch (err) {
         case 0:
                 path_put(&nd->path);
diff --git a/fs/devpts/inode.c b/fs/devpts/inode.c
index 285b64a8b06e..488eb424f662 100644
--- a/fs/devpts/inode.c
+++ b/fs/devpts/inode.c
@@ -29,7 +29,7 @@
 #define DEVPTS_DEFAULT_MODE 0600
 
 extern int pty_limit;                   /* Config limit on Unix98 ptys */
-static DEFINE_IDR(allocated_ptys);
+static DEFINE_IDA(allocated_ptys);
 static DEFINE_MUTEX(allocated_ptys_lock);
 
 static struct vfsmount *devpts_mnt;
@@ -180,24 +180,24 @@ static struct dentry *get_node(int num)
 int devpts_new_index(void)
 {
         int index;
-        int idr_ret;
+        int ida_ret;
 
 retry:
-        if (!idr_pre_get(&allocated_ptys, GFP_KERNEL)) {
+        if (!ida_pre_get(&allocated_ptys, GFP_KERNEL)) {
                 return -ENOMEM;
         }
 
         mutex_lock(&allocated_ptys_lock);
-        idr_ret = idr_get_new(&allocated_ptys, NULL, &index);
-        if (idr_ret < 0) {
+        ida_ret = ida_get_new(&allocated_ptys, &index);
+        if (ida_ret < 0) {
                 mutex_unlock(&allocated_ptys_lock);
-                if (idr_ret == -EAGAIN)
+                if (ida_ret == -EAGAIN)
                         goto retry;
                 return -EIO;
         }
 
         if (index >= pty_limit) {
-                idr_remove(&allocated_ptys, index);
+                ida_remove(&allocated_ptys, index);
                 mutex_unlock(&allocated_ptys_lock);
                 return -EIO;
         }
@@ -208,7 +208,7 @@ retry:
 void devpts_kill_index(int idx)
 {
         mutex_lock(&allocated_ptys_lock);
-        idr_remove(&allocated_ptys, idx);
+        ida_remove(&allocated_ptys, idx);
         mutex_unlock(&allocated_ptys_lock);
 }
 
diff --git a/fs/dlm/lock.c b/fs/dlm/lock.c
index 2d3d1027ce2b..724ddac91538 100644
--- a/fs/dlm/lock.c
+++ b/fs/dlm/lock.c
@@ -363,6 +363,7 @@ static int search_rsb_list(struct list_head *head, char *name, int len,
                 if (len == r->res_length && !memcmp(name, r->res_name, len))
                         goto found;
         }
+        *r_ret = NULL;
         return -EBADR;
 
  found:
@@ -1782,7 +1783,8 @@ static void grant_pending_locks(struct dlm_rsb *r)
 
         list_for_each_entry_safe(lkb, s, &r->res_grantqueue, lkb_statequeue) {
                 if (lkb->lkb_bastfn && lock_requires_bast(lkb, high, cw)) {
-                        if (cw && high == DLM_LOCK_PR)
+                        if (cw && high == DLM_LOCK_PR &&
+                            lkb->lkb_grmode == DLM_LOCK_PR)
                                 queue_bast(r, lkb, DLM_LOCK_CW);
                         else
                                 queue_bast(r, lkb, high);
diff --git a/fs/dlm/lowcomms.c b/fs/dlm/lowcomms.c
index 637018c891ef..3962262f991a 100644
--- a/fs/dlm/lowcomms.c
+++ b/fs/dlm/lowcomms.c
@@ -891,8 +891,10 @@ static void tcp_connect_to_sock(struct connection *con)
                 goto out_err;
 
         memset(&saddr, 0, sizeof(saddr));
-        if (dlm_nodeid_to_addr(con->nodeid, &saddr))
+        if (dlm_nodeid_to_addr(con->nodeid, &saddr)) {
+                sock_release(sock);
                 goto out_err;
+        }
 
         sock->sk->sk_user_data = con;
         con->rx_action = receive_from_sock;
diff --git a/fs/dlm/user.c b/fs/dlm/user.c
index f976f303c196..929e48ae7591 100644
--- a/fs/dlm/user.c
+++ b/fs/dlm/user.c
@@ -539,7 +539,7 @@ static ssize_t device_write(struct file *file, const char __user *buf,
 
         /* do we really need this? can a write happen after a close? */
         if ((kbuf->cmd == DLM_USER_LOCK || kbuf->cmd == DLM_USER_UNLOCK) &&
-            test_bit(DLM_PROC_FLAGS_CLOSING, &proc->flags))
+            (proc && test_bit(DLM_PROC_FLAGS_CLOSING, &proc->flags)))
                 return -EINVAL;
 
         sigfillset(&allsigs);
diff --git a/fs/dquot.c b/fs/dquot.c
index 1346eebe74ce..8ec4d6cc7633 100644
--- a/fs/dquot.c
+++ b/fs/dquot.c
@@ -1793,6 +1793,21 @@ static int vfs_quota_on_remount(struct super_block *sb, int type)
         return ret;
 }
 
+int vfs_quota_on_path(struct super_block *sb, int type, int format_id,
+                      struct path *path)
+{
+        int error = security_quota_on(path->dentry);
+        if (error)
+                return error;
+        /* Quota file not on the same filesystem? */
+        if (path->mnt->mnt_sb != sb)
+                error = -EXDEV;
+        else
+                error = vfs_quota_on_inode(path->dentry->d_inode, type,
+                                           format_id);
+        return error;
+}
+
 /* Actual function called from quotactl() */
 int vfs_quota_on(struct super_block *sb, int type, int format_id, char *path,
                  int remount)
@@ -1804,19 +1819,10 @@ int vfs_quota_on(struct super_block *sb, int type, int format_id, char *path,
                 return vfs_quota_on_remount(sb, type);
 
         error = path_lookup(path, LOOKUP_FOLLOW, &nd);
-        if (error < 0)
-                return error;
-        error = security_quota_on(nd.path.dentry);
-        if (error)
-                goto out_path;
-        /* Quota file not on the same filesystem? */
-        if (nd.path.mnt->mnt_sb != sb)
-                error = -EXDEV;
-        else
-                error = vfs_quota_on_inode(nd.path.dentry->d_inode, type,
-                                           format_id);
-out_path:
-        path_put(&nd.path);
+        if (!error) {
+                error = vfs_quota_on_path(sb, type, format_id, &nd.path);
+                path_put(&nd.path);
+        }
         return error;
 }
 
@@ -2185,6 +2191,7 @@ EXPORT_SYMBOL(unregister_quota_format);
 EXPORT_SYMBOL(dqstats);
 EXPORT_SYMBOL(dq_data_lock);
 EXPORT_SYMBOL(vfs_quota_on);
+EXPORT_SYMBOL(vfs_quota_on_path);
 EXPORT_SYMBOL(vfs_quota_on_mount);
 EXPORT_SYMBOL(vfs_quota_off);
 EXPORT_SYMBOL(vfs_quota_sync);
diff --git a/fs/ecryptfs/crypto.c b/fs/ecryptfs/crypto.c
index 7b99917ffadc..06db79d05c12 100644
--- a/fs/ecryptfs/crypto.c
+++ b/fs/ecryptfs/crypto.c
@@ -475,8 +475,8 @@ int ecryptfs_encrypt_page(struct page *page)
 {
         struct inode *ecryptfs_inode;
         struct ecryptfs_crypt_stat *crypt_stat;
-        char *enc_extent_virt = NULL;
-        struct page *enc_extent_page;
+        char *enc_extent_virt;
+        struct page *enc_extent_page = NULL;
         loff_t extent_offset;
         int rc = 0;
 
@@ -492,14 +492,14 @@ int ecryptfs_encrypt_page(struct page *page)
                                page->index);
                 goto out;
         }
-        enc_extent_virt = kmalloc(PAGE_CACHE_SIZE, GFP_USER);
-        if (!enc_extent_virt) {
+        enc_extent_page = alloc_page(GFP_USER);
+        if (!enc_extent_page) {
                 rc = -ENOMEM;
                 ecryptfs_printk(KERN_ERR, "Error allocating memory for "
                                 "encrypted extent\n");
                 goto out;
         }
-        enc_extent_page = virt_to_page(enc_extent_virt);
+        enc_extent_virt = kmap(enc_extent_page);
         for (extent_offset = 0;
              extent_offset < (PAGE_CACHE_SIZE / crypt_stat->extent_size);
              extent_offset++) {
@@ -527,7 +527,10 @@ int ecryptfs_encrypt_page(struct page *page)
                 }
         }
 out:
-        kfree(enc_extent_virt);
+        if (enc_extent_page) {
+                kunmap(enc_extent_page);
+                __free_page(enc_extent_page);
+        }
         return rc;
 }
 
@@ -609,8 +612,8 @@ int ecryptfs_decrypt_page(struct page *page)
 {
         struct inode *ecryptfs_inode;
         struct ecryptfs_crypt_stat *crypt_stat;
-        char *enc_extent_virt = NULL;
-        struct page *enc_extent_page;
+        char *enc_extent_virt;
+        struct page *enc_extent_page = NULL;
         unsigned long extent_offset;
         int rc = 0;
 
@@ -627,14 +630,14 @@ int ecryptfs_decrypt_page(struct page *page)
                                page->index);
                 goto out;
         }
-        enc_extent_virt = kmalloc(PAGE_CACHE_SIZE, GFP_USER);
-        if (!enc_extent_virt) {
+        enc_extent_page = alloc_page(GFP_USER);
+        if (!enc_extent_page) {
                 rc = -ENOMEM;
                 ecryptfs_printk(KERN_ERR, "Error allocating memory for "
                                 "encrypted extent\n");
                 goto out;
         }
-        enc_extent_page = virt_to_page(enc_extent_virt);
+        enc_extent_virt = kmap(enc_extent_page);
         for (extent_offset = 0;
              extent_offset < (PAGE_CACHE_SIZE / crypt_stat->extent_size);
              extent_offset++) {
@@ -662,7 +665,10 @@ int ecryptfs_decrypt_page(struct page *page)
                 }
         }
 out:
-        kfree(enc_extent_virt);
+        if (enc_extent_page) {
+                kunmap(enc_extent_page);
+                __free_page(enc_extent_page);
+        }
         return rc;
 }
 
diff --git a/fs/exec.c b/fs/exec.c
index 9696bbf0f0b1..32993beecbe9 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -32,6 +32,7 @@
 #include <linux/swap.h>
 #include <linux/string.h>
 #include <linux/init.h>
+#include <linux/pagemap.h>
 #include <linux/highmem.h>
 #include <linux/spinlock.h>
 #include <linux/key.h>
diff --git a/fs/ext2/inode.c b/fs/ext2/inode.c
index 384fc0d1dd74..991d6dfeb51f 100644
--- a/fs/ext2/inode.c
+++ b/fs/ext2/inode.c
@@ -791,6 +791,7 @@ const struct address_space_operations ext2_aops = {
         .direct_IO              = ext2_direct_IO,
         .writepages             = ext2_writepages,
         .migratepage            = buffer_migrate_page,
+        .is_partially_uptodate  = block_is_partially_uptodate,
 };
 
 const struct address_space_operations ext2_aops_xip = {
diff --git a/fs/ext3/inode.c b/fs/ext3/inode.c
index 3bf07d70b914..507d8689b111 100644
--- a/fs/ext3/inode.c
+++ b/fs/ext3/inode.c
@@ -1767,44 +1767,47 @@ static int ext3_journalled_set_page_dirty(struct page *page)
 }
 
 static const struct address_space_operations ext3_ordered_aops = {
-        .readpage       = ext3_readpage,
-        .readpages      = ext3_readpages,
-        .writepage      = ext3_ordered_writepage,
-        .sync_page      = block_sync_page,
-        .write_begin    = ext3_write_begin,
-        .write_end      = ext3_ordered_write_end,
-        .bmap           = ext3_bmap,
-        .invalidatepage = ext3_invalidatepage,
-        .releasepage    = ext3_releasepage,
-        .direct_IO      = ext3_direct_IO,
-        .migratepage    = buffer_migrate_page,
+        .readpage               = ext3_readpage,
+        .readpages              = ext3_readpages,
+        .writepage              = ext3_ordered_writepage,
+        .sync_page              = block_sync_page,
+        .write_begin            = ext3_write_begin,
+        .write_end              = ext3_ordered_write_end,
+        .bmap                   = ext3_bmap,
+        .invalidatepage         = ext3_invalidatepage,
+        .releasepage            = ext3_releasepage,
+        .direct_IO              = ext3_direct_IO,
+        .migratepage            = buffer_migrate_page,
+        .is_partially_uptodate  = block_is_partially_uptodate,
 };
 
 static const struct address_space_operations ext3_writeback_aops = {
-        .readpage       = ext3_readpage,
-        .readpages      = ext3_readpages,
-        .writepage      = ext3_writeback_writepage,
-        .sync_page      = block_sync_page,
-        .write_begin    = ext3_write_begin,
-        .write_end      = ext3_writeback_write_end,
-        .bmap           = ext3_bmap,
-        .invalidatepage = ext3_invalidatepage,
-        .releasepage    = ext3_releasepage,
-        .direct_IO      = ext3_direct_IO,
-        .migratepage    = buffer_migrate_page,
+        .readpage               = ext3_readpage,
+        .readpages              = ext3_readpages,
+        .writepage              = ext3_writeback_writepage,
+        .sync_page              = block_sync_page,
+        .write_begin            = ext3_write_begin,
+        .write_end              = ext3_writeback_write_end,
+        .bmap                   = ext3_bmap,
+        .invalidatepage         = ext3_invalidatepage,
+        .releasepage            = ext3_releasepage,
+        .direct_IO              = ext3_direct_IO,
+        .migratepage            = buffer_migrate_page,
+        .is_partially_uptodate  = block_is_partially_uptodate,
 };
 
 static const struct address_space_operations ext3_journalled_aops = {
-        .readpage       = ext3_readpage,
-        .readpages      = ext3_readpages,
-        .writepage      = ext3_journalled_writepage,
-        .sync_page      = block_sync_page,
-        .write_begin    = ext3_write_begin,
-        .write_end      = ext3_journalled_write_end,
-        .set_page_dirty = ext3_journalled_set_page_dirty,
-        .bmap           = ext3_bmap,
-        .invalidatepage = ext3_invalidatepage,
-        .releasepage    = ext3_releasepage,
+        .readpage               = ext3_readpage,
+        .readpages              = ext3_readpages,
+        .writepage              = ext3_journalled_writepage,
+        .sync_page              = block_sync_page,
+        .write_begin            = ext3_write_begin,
+        .write_end              = ext3_journalled_write_end,
+        .set_page_dirty         = ext3_journalled_set_page_dirty,
+        .bmap                   = ext3_bmap,
+        .invalidatepage         = ext3_invalidatepage,
+        .releasepage            = ext3_releasepage,
+        .is_partially_uptodate  = block_is_partially_uptodate,
 };
 
 void ext3_set_aops(struct inode *inode)
diff --git a/fs/ext3/super.c b/fs/ext3/super.c
index 8ddced384674..f38a5afc39a1 100644
--- a/fs/ext3/super.c
+++ b/fs/ext3/super.c
@@ -2810,8 +2810,9 @@ static int ext3_quota_on(struct super_block *sb, int type, int format_id,
                 journal_unlock_updates(EXT3_SB(sb)->s_journal);
         }
 
+        err = vfs_quota_on_path(sb, type, format_id, &nd.path);
         path_put(&nd.path);
-        return vfs_quota_on(sb, type, format_id, path, remount);
+        return err;
 }
 
 /* Read data from quotafile - avoid pagecache and such because we cannot afford
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 8ca2763df091..9843b046c235 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -2806,59 +2806,63 @@ static int ext4_journalled_set_page_dirty(struct page *page)
 }
 
 static const struct address_space_operations ext4_ordered_aops = {
-        .readpage       = ext4_readpage,
-        .readpages      = ext4_readpages,
-        .writepage      = ext4_normal_writepage,
-        .sync_page      = block_sync_page,
-        .write_begin    = ext4_write_begin,
-        .write_end      = ext4_ordered_write_end,
-        .bmap           = ext4_bmap,
-        .invalidatepage = ext4_invalidatepage,
-        .releasepage    = ext4_releasepage,
-        .direct_IO      = ext4_direct_IO,
-        .migratepage    = buffer_migrate_page,
+        .readpage               = ext4_readpage,
+        .readpages              = ext4_readpages,
+        .writepage              = ext4_normal_writepage,
+        .sync_page              = block_sync_page,
+        .write_begin            = ext4_write_begin,
+        .write_end              = ext4_ordered_write_end,
+        .bmap                   = ext4_bmap,
+        .invalidatepage         = ext4_invalidatepage,
+        .releasepage            = ext4_releasepage,
+        .direct_IO              = ext4_direct_IO,
+        .migratepage            = buffer_migrate_page,
+        .is_partially_uptodate  = block_is_partially_uptodate,
 };
 
 static const struct address_space_operations ext4_writeback_aops = {
-        .readpage       = ext4_readpage,
-        .readpages      = ext4_readpages,
-        .writepage      = ext4_normal_writepage,
-        .sync_page      = block_sync_page,
-        .write_begin    = ext4_write_begin,
-        .write_end      = ext4_writeback_write_end,
-        .bmap           = ext4_bmap,
-        .invalidatepage = ext4_invalidatepage,
-        .releasepage    = ext4_releasepage,
-        .direct_IO      = ext4_direct_IO,
-        .migratepage    = buffer_migrate_page,
+        .readpage               = ext4_readpage,
+        .readpages              = ext4_readpages,
+        .writepage              = ext4_normal_writepage,
+        .sync_page              = block_sync_page,
+        .write_begin            = ext4_write_begin,
+        .write_end              = ext4_writeback_write_end,
+        .bmap                   = ext4_bmap,
+        .invalidatepage         = ext4_invalidatepage,
+        .releasepage            = ext4_releasepage,
+        .direct_IO              = ext4_direct_IO,
+        .migratepage            = buffer_migrate_page,
+        .is_partially_uptodate  = block_is_partially_uptodate,
 };
 
 static const struct address_space_operations ext4_journalled_aops = {
-        .readpage       = ext4_readpage,
-        .readpages      = ext4_readpages,
-        .writepage      = ext4_journalled_writepage,
-        .sync_page      = block_sync_page,
-        .write_begin    = ext4_write_begin,
-        .write_end      = ext4_journalled_write_end,
-        .set_page_dirty = ext4_journalled_set_page_dirty,
-        .bmap           = ext4_bmap,
-        .invalidatepage = ext4_invalidatepage,
-        .releasepage    = ext4_releasepage,
+        .readpage               = ext4_readpage,
+        .readpages              = ext4_readpages,
+        .writepage              = ext4_journalled_writepage,
+        .sync_page              = block_sync_page,
+        .write_begin            = ext4_write_begin,
+        .write_end              = ext4_journalled_write_end,
+        .set_page_dirty         = ext4_journalled_set_page_dirty,
+        .bmap                   = ext4_bmap,
+        .invalidatepage         = ext4_invalidatepage,
+        .releasepage            = ext4_releasepage,
+        .is_partially_uptodate  = block_is_partially_uptodate,
 };
 
 static const struct address_space_operations ext4_da_aops = {
-        .readpage       = ext4_readpage,
-        .readpages      = ext4_readpages,
-        .writepage      = ext4_da_writepage,
-        .writepages     = ext4_da_writepages,
-        .sync_page      = block_sync_page,
-        .write_begin    = ext4_da_write_begin,
-        .write_end      = ext4_da_write_end,
-        .bmap           = ext4_bmap,
-        .invalidatepage = ext4_da_invalidatepage,
-        .releasepage    = ext4_releasepage,
-        .direct_IO      = ext4_direct_IO,
-        .migratepage    = buffer_migrate_page,
+        .readpage               = ext4_readpage,
+        .readpages              = ext4_readpages,
+        .writepage              = ext4_da_writepage,
+        .writepages             = ext4_da_writepages,
+        .sync_page              = block_sync_page,
+        .write_begin            = ext4_da_write_begin,
+        .write_end              = ext4_da_write_end,
+        .bmap                   = ext4_bmap,
+        .invalidatepage         = ext4_da_invalidatepage,
+        .releasepage            = ext4_releasepage,
+        .direct_IO              = ext4_direct_IO,
+        .migratepage            = buffer_migrate_page,
+        .is_partially_uptodate  = block_is_partially_uptodate,
 };
 
 void ext4_set_aops(struct inode *inode)
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index b5479b1dff14..1e69f29a8c55 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -3352,8 +3352,9 @@ static int ext4_quota_on(struct super_block *sb, int type, int format_id,
                 jbd2_journal_unlock_updates(EXT4_SB(sb)->s_journal);
         }
 
+        err = vfs_quota_on_path(sb, type, format_id, &nd.path);
         path_put(&nd.path);
-        return vfs_quota_on(sb, type, format_id, path, remount);
+        return err;
 }
 
 /* Read data from quotafile - avoid pagecache and such because we cannot afford
diff --git a/fs/fcntl.c b/fs/fcntl.c
index 61d625136813..ac4f7db9f134 100644
--- a/fs/fcntl.c
+++ b/fs/fcntl.c
@@ -49,73 +49,6 @@ static int get_close_on_exec(unsigned int fd)
         return res;
 }
 
-/*
- * locate_fd finds a free file descriptor in the open_fds fdset,
- * expanding the fd arrays if necessary.  Must be called with the
- * file_lock held for write.
- */
-
-static int locate_fd(unsigned int orig_start, int cloexec)
-{
-        struct files_struct *files = current->files;
-        unsigned int newfd;
-        unsigned int start;
-        int error;
-        struct fdtable *fdt;
-
-        spin_lock(&files->file_lock);
-repeat:
-        fdt = files_fdtable(files);
-        /*
-         * Someone might have closed fd's in the range
-         * orig_start..fdt->next_fd
-         */
-        start = orig_start;
-        if (start < files->next_fd)
-                start = files->next_fd;
-
-        newfd = start;
-        if (start < fdt->max_fds)
-                newfd = find_next_zero_bit(fdt->open_fds->fds_bits,
-                                           fdt->max_fds, start);
-
-        error = expand_files(files, newfd);
-        if (error < 0)
-                goto out;
-
-        /*
-         * If we needed to expand the fs array we
-         * might have blocked - try again.
-         */
-        if (error)
-                goto repeat;
-
-        if (start <= files->next_fd)
-                files->next_fd = newfd + 1;
-
-        FD_SET(newfd, fdt->open_fds);
-        if (cloexec)
-                FD_SET(newfd, fdt->close_on_exec);
-        else
-                FD_CLR(newfd, fdt->close_on_exec);
-        error = newfd;
-
-out:
-        spin_unlock(&files->file_lock);
-        return error;
-}
-
-static int dupfd(struct file *file, unsigned int start, int cloexec)
-{
-        int fd = locate_fd(start, cloexec);
-        if (fd >= 0)
-                fd_install(fd, file);
-        else
-                fput(file);
-
-        return fd;
-}
-
 asmlinkage long sys_dup3(unsigned int oldfd, unsigned int newfd, int flags)
 {
         int err = -EBADF;
@@ -130,31 +63,35 @@ asmlinkage long sys_dup3(unsigned int oldfd, unsigned int newfd, int flags)
                 return -EINVAL;
 
         spin_lock(&files->file_lock);
-        if (!(file = fcheck(oldfd)))
-                goto out_unlock;
-        get_file(file);                 /* We are now finished with oldfd */
-
         err = expand_files(files, newfd);
+        file = fcheck(oldfd);
+        if (unlikely(!file))
+                goto Ebadf;
         if (unlikely(err < 0)) {
                 if (err == -EMFILE)
-                        err = -EBADF;
-                goto out_fput;
+                        goto Ebadf;
+                goto out_unlock;
         }
-
-        /* To avoid races with open() and dup(), we will mark the fd as
-         * in-use in the open-file bitmap throughout the entire dup2()
-         * process.  This is quite safe: do_close() uses the fd array
-         * entry, not the bitmap, to decide what work needs to be
-         * done.  --sct */
-        /* Doesn't work. open() might be there first. --AV */
-
-        /* Yes. It's a race. In user space. Nothing sane to do */
+        /*
+         * We need to detect attempts to do dup2() over allocated but still
+         * not finished descriptor.  NB: OpenBSD avoids that at the price of
+         * extra work in their equivalent of fget() - they insert struct
+         * file immediately after grabbing descriptor, mark it larval if
+         * more work (e.g. actual opening) is needed and make sure that
+         * fget() treats larval files as absent.  Potentially interesting,
+         * but while extra work in fget() is trivial, locking implications
+         * and amount of surgery on open()-related paths in VFS are not.
+         * FreeBSD fails with -EBADF in the same situation, NetBSD "solution"
+         * deadlocks in rather amusing ways, AFAICS.  All of that is out of
+         * scope of POSIX or SUS, since neither considers shared descriptor
+         * tables and this condition does not arise without those.
+         */
         err = -EBUSY;
         fdt = files_fdtable(files);
         tofree = fdt->fd[newfd];
         if (!tofree && FD_ISSET(newfd, fdt->open_fds))
-                goto out_fput;
-
+                goto out_unlock;
+        get_file(file);
         rcu_assign_pointer(fdt->fd[newfd], file);
         FD_SET(newfd, fdt->open_fds);
         if (flags & O_CLOEXEC)
@@ -165,17 +102,14 @@ asmlinkage long sys_dup3(unsigned int oldfd, unsigned int newfd, int flags)
 
         if (tofree)
                 filp_close(tofree, files);
-        err = newfd;
-out:
-        return err;
-out_unlock:
-        spin_unlock(&files->file_lock);
-        goto out;
 
-out_fput:
+        return newfd;
+
+Ebadf:
+        err = -EBADF;
+out_unlock:
         spin_unlock(&files->file_lock);
-        fput(file);
-        goto out;
+        return err;
 }
 
 asmlinkage long sys_dup2(unsigned int oldfd, unsigned int newfd)
@@ -194,10 +128,15 @@ asmlinkage long sys_dup2(unsigned int oldfd, unsigned int newfd)
 asmlinkage long sys_dup(unsigned int fildes)
 {
         int ret = -EBADF;
-        struct file * file = fget(fildes);
-
-        if (file)
-                ret = dupfd(file, 0, 0);
+        struct file *file = fget(fildes);
+
+        if (file) {
+                ret = get_unused_fd();
+                if (ret >= 0)
+                        fd_install(ret, file);
+                else
+                        fput(file);
+        }
         return ret;
 }
 
@@ -322,8 +261,11 @@ static long do_fcntl(int fd, unsigned int cmd, unsigned long arg,
         case F_DUPFD_CLOEXEC:
                 if (arg >= current->signal->rlim[RLIMIT_NOFILE].rlim_cur)
                         break;
-                get_file(filp);
-                err = dupfd(filp, arg, cmd == F_DUPFD_CLOEXEC);
+                err = alloc_fd(arg, cmd == F_DUPFD_CLOEXEC ? O_CLOEXEC : 0);
+                if (err >= 0) {
+                        get_file(filp);
+                        fd_install(err, filp);
+                }
                 break;
         case F_GETFD:
                 err = get_close_on_exec(fd) ? FD_CLOEXEC : 0;
diff --git a/fs/file.c b/fs/file.c
index d8773b19fe47..f313314f996f 100644
--- a/fs/file.c
+++ b/fs/file.c
@@ -6,6 +6,7 @@
  *  Manage the dynamic fd arrays in the process files_struct.
  */
 
+#include <linux/module.h>
 #include <linux/fs.h>
 #include <linux/mm.h>
 #include <linux/time.h>
@@ -432,3 +433,63 @@ struct files_struct init_files = {
         },
         .file_lock      = __SPIN_LOCK_UNLOCKED(init_task.file_lock),
 };
+
+/*
+ * allocate a file descriptor, mark it busy.
+ */
+int alloc_fd(unsigned start, unsigned flags)
+{
+        struct files_struct *files = current->files;
+        unsigned int fd;
+        int error;
+        struct fdtable *fdt;
+
+        spin_lock(&files->file_lock);
+repeat:
+        fdt = files_fdtable(files);
+        fd = start;
+        if (fd < files->next_fd)
+                fd = files->next_fd;
+
+        if (fd < fdt->max_fds)
+                fd = find_next_zero_bit(fdt->open_fds->fds_bits,
+                                           fdt->max_fds, fd);
+
+        error = expand_files(files, fd);
+        if (error < 0)
+                goto out;
+
+        /*
+         * If we needed to expand the fs array we
+         * might have blocked - try again.
+         */
+        if (error)
+                goto repeat;
+
+        if (start <= files->next_fd)
+                files->next_fd = fd + 1;
+
+        FD_SET(fd, fdt->open_fds);
+        if (flags & O_CLOEXEC)
+                FD_SET(fd, fdt->close_on_exec);
+        else
+                FD_CLR(fd, fdt->close_on_exec);
+        error = fd;
+#if 1
+        /* Sanity check */
+        if (rcu_dereference(fdt->fd[fd]) != NULL) {
+                printk(KERN_WARNING "alloc_fd: slot %d not NULL!\n", fd);
+                rcu_assign_pointer(fdt->fd[fd], NULL);
+        }
+#endif
+
+out:
+        spin_unlock(&files->file_lock);
+        return error;
+}
+
+int get_unused_fd(void)
+{
+        return alloc_fd(0, 0);
+}
+EXPORT_SYMBOL(get_unused_fd);
diff --git a/fs/jffs2/summary.c b/fs/jffs2/summary.c
index 629af01e5ade..6caf1e1ee26d 100644
--- a/fs/jffs2/summary.c
+++ b/fs/jffs2/summary.c
@@ -23,6 +23,8 @@
 
 int jffs2_sum_init(struct jffs2_sb_info *c)
 {
+        uint32_t sum_size = max_t(uint32_t, c->sector_size, MAX_SUMMARY_SIZE);
+
         c->summary = kzalloc(sizeof(struct jffs2_summary), GFP_KERNEL);
 
         if (!c->summary) {
@@ -30,7 +32,7 @@ int jffs2_sum_init(struct jffs2_sb_info *c)
                 return -ENOMEM;
         }
 
-        c->summary->sum_buf = vmalloc(c->sector_size);
+        c->summary->sum_buf = kmalloc(sum_size, GFP_KERNEL);
 
         if (!c->summary->sum_buf) {
                 JFFS2_WARNING("Can't allocate buffer for writing out summary information!\n");
@@ -49,7 +51,7 @@ void jffs2_sum_exit(struct jffs2_sb_info *c)
 
         jffs2_sum_disable_collecting(c->summary);
 
-        vfree(c->summary->sum_buf);
+        kfree(c->summary->sum_buf);
         c->summary->sum_buf = NULL;
 
         kfree(c->summary);
@@ -665,7 +667,7 @@ crc_err:
 /* Write summary data to flash - helper function for jffs2_sum_write_sumnode() */
 
 static int jffs2_sum_write_data(struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb,
-                                        uint32_t infosize, uint32_t datasize, int padsize)
+                                uint32_t infosize, uint32_t datasize, int padsize)
 {
         struct jffs2_raw_summary isum;
         union jffs2_sum_mem *temp;
@@ -676,6 +678,26 @@ static int jffs2_sum_write_data(struct jffs2_sb_info *c, struct jffs2_eraseblock
         int ret;
         size_t retlen;
 
+        if (padsize + datasize > MAX_SUMMARY_SIZE) {
+                /* It won't fit in the buffer. Abort summary for this jeb */
+                jffs2_sum_disable_collecting(c->summary);
+
+                JFFS2_WARNING("Summary too big (%d data, %d pad) in eraseblock at %08x\n",
+                              datasize, padsize, jeb->offset);
+                /* Non-fatal */
+                return 0;
+        }
+        /* Is there enough space for summary? */
+        if (padsize < 0) {
+                /* don't try to write out summary for this jeb */
+                jffs2_sum_disable_collecting(c->summary);
+
+                JFFS2_WARNING("Not enough space for summary, padsize = %d\n",
+                              padsize);
+                /* Non-fatal */
+                return 0;
+        }
+
         memset(c->summary->sum_buf, 0xff, datasize);
         memset(&isum, 0, sizeof(isum));
 
@@ -821,7 +843,7 @@ int jffs2_sum_write_sumnode(struct jffs2_sb_info *c)
 {
         int datasize, infosize, padsize;
         struct jffs2_eraseblock *jeb;
-        int ret;
+        int ret = 0;
 
         dbg_summary("called\n");
 
@@ -841,16 +863,6 @@ int jffs2_sum_write_sumnode(struct jffs2_sb_info *c)
         infosize += padsize;
         datasize += padsize;
 
-        /* Is there enough space for summary? */
-        if (padsize < 0) {
-                /* don't try to write out summary for this jeb */
-                jffs2_sum_disable_collecting(c->summary);
-
-                JFFS2_WARNING("Not enough space for summary, padsize = %d\n", padsize);
-                spin_lock(&c->erase_completion_lock);
-                return 0;
-        }
-
         ret = jffs2_sum_write_data(c, jeb, infosize, datasize, padsize);
         spin_lock(&c->erase_completion_lock);
         return ret;
diff --git a/fs/jffs2/summary.h b/fs/jffs2/summary.h
index 8bf34f2fa5ce..60207a2ae952 100644
--- a/fs/jffs2/summary.h
+++ b/fs/jffs2/summary.h
@@ -13,6 +13,12 @@
 #ifndef JFFS2_SUMMARY_H
 #define JFFS2_SUMMARY_H
 
+/* Limit summary size to 64KiB so that we can kmalloc it. If the summary
+   is larger than that, we have to just ditch it and avoid using summary
+   for the eraseblock in question... and it probably doesn't hurt us much
+   anyway. */
+#define MAX_SUMMARY_SIZE 65536
+
 #include <linux/uio.h>
 #include <linux/jffs2.h>
 
diff --git a/fs/libfs.c b/fs/libfs.c
index baeb71ee1cde..1add676a19df 100644
--- a/fs/libfs.c
+++ b/fs/libfs.c
@@ -216,8 +216,8 @@ int get_sb_pseudo(struct file_system_type *fs_type, char *name,
 
         s->s_flags = MS_NOUSER;
         s->s_maxbytes = ~0ULL;
-        s->s_blocksize = 1024;
-        s->s_blocksize_bits = 10;
+        s->s_blocksize = PAGE_SIZE;
+        s->s_blocksize_bits = PAGE_SHIFT;
         s->s_magic = magic;
         s->s_op = ops ? ops : &simple_super_operations;
         s->s_time_gran = 1;
diff --git a/fs/namei.c b/fs/namei.c
index a7b0a0b80128..4ea63ed5e791 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -274,7 +274,7 @@ int inode_permission(struct inode *inode, int mask)
                 return retval;
 
         return security_inode_permission(inode,
-                        mask & (MAY_READ|MAY_WRITE|MAY_EXEC));
+                        mask & (MAY_READ|MAY_WRITE|MAY_EXEC|MAY_APPEND));
 }
 
 /**
@@ -1431,8 +1431,7 @@ static int may_delete(struct inode *dir,struct dentry *victim,int isdir)
  *  3. We should have write and exec permissions on dir
  *  4. We can't do it if dir is immutable (done in permission())
  */
-static inline int may_create(struct inode *dir, struct dentry *child,
-                             struct nameidata *nd)
+static inline int may_create(struct inode *dir, struct dentry *child)
 {
         if (child->d_inode)
                 return -EEXIST;
@@ -1504,7 +1503,7 @@ void unlock_rename(struct dentry *p1, struct dentry *p2)
 int vfs_create(struct inode *dir, struct dentry *dentry, int mode,
                 struct nameidata *nd)
 {
-        int error = may_create(dir, dentry, nd);
+        int error = may_create(dir, dentry);
 
         if (error)
                 return error;
@@ -1948,7 +1947,7 @@ EXPORT_SYMBOL_GPL(lookup_create);
 
 int vfs_mknod(struct inode *dir, struct dentry *dentry, int mode, dev_t dev)
 {
-        int error = may_create(dir, dentry, NULL);
+        int error = may_create(dir, dentry);
 
         if (error)
                 return error;
@@ -2049,7 +2048,7 @@ asmlinkage long sys_mknod(const char __user *filename, int mode, unsigned dev)
 
 int vfs_mkdir(struct inode *dir, struct dentry *dentry, int mode)
 {
-        int error = may_create(dir, dentry, NULL);
+        int error = may_create(dir, dentry);
 
         if (error)
                 return error;
@@ -2316,7 +2315,7 @@ asmlinkage long sys_unlink(const char __user *pathname)
 
 int vfs_symlink(struct inode *dir, struct dentry *dentry, const char *oldname)
 {
-        int error = may_create(dir, dentry, NULL);
+        int error = may_create(dir, dentry);
 
         if (error)
                 return error;
@@ -2386,7 +2385,7 @@ int vfs_link(struct dentry *old_dentry, struct inode *dir, struct dentry *new_de
         if (!inode)
                 return -ENOENT;
 
-        error = may_create(dir, new_dentry, NULL);
+        error = may_create(dir, new_dentry);
         if (error)
                 return error;
 
@@ -2595,7 +2594,7 @@ int vfs_rename(struct inode *old_dir, struct dentry *old_dentry,
                 return error;
 
         if (!new_dentry->d_inode)
-                error = may_create(new_dir, new_dentry, NULL);
+                error = may_create(new_dir, new_dentry);
         else
                 error = may_delete(new_dir, new_dentry, is_dir);
         if (error)
diff --git a/fs/namespace.c b/fs/namespace.c
index 411728c0c8bb..6e283c93b50d 100644
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -1667,31 +1667,31 @@ static noinline int do_new_mount(struct nameidata *nd, char *type, int flags,
         if (IS_ERR(mnt))
                 return PTR_ERR(mnt);
 
-        return do_add_mount(mnt, nd, mnt_flags, NULL);
+        return do_add_mount(mnt, &nd->path, mnt_flags, NULL);
 }
 
 /*
  * add a mount into a namespace's mount tree
  * - provide the option of adding the new mount to an expiration list
  */
-int do_add_mount(struct vfsmount *newmnt, struct nameidata *nd,
+int do_add_mount(struct vfsmount *newmnt, struct path *path,
                  int mnt_flags, struct list_head *fslist)
 {
         int err;
 
         down_write(&namespace_sem);
         /* Something was mounted here while we slept */
-        while (d_mountpoint(nd->path.dentry) &&
-               follow_down(&nd->path.mnt, &nd->path.dentry))
+        while (d_mountpoint(path->dentry) &&
+               follow_down(&path->mnt, &path->dentry))
                 ;
         err = -EINVAL;
-        if (!check_mnt(nd->path.mnt))
+        if (!check_mnt(path->mnt))
                 goto unlock;
 
         /* Refuse the same filesystem on the same mount point */
         err = -EBUSY;
-        if (nd->path.mnt->mnt_sb == newmnt->mnt_sb &&
-            nd->path.mnt->mnt_root == nd->path.dentry)
+        if (path->mnt->mnt_sb == newmnt->mnt_sb &&
+            path->mnt->mnt_root == path->dentry)
                 goto unlock;
 
         err = -EINVAL;
@@ -1699,7 +1699,7 @@ int do_add_mount(struct vfsmount *newmnt, struct nameidata *nd,
                 goto unlock;
 
         newmnt->mnt_flags = mnt_flags;
-        if ((err = graft_tree(newmnt, &nd->path)))
+        if ((err = graft_tree(newmnt, path)))
                 goto unlock;
 
         if (fslist) /* add to the specified expiration list */
diff --git a/fs/nfs/namespace.c b/fs/nfs/namespace.c
index 2f285ef76399..66df08dd1caf 100644
--- a/fs/nfs/namespace.c
+++ b/fs/nfs/namespace.c
@@ -129,7 +129,7 @@ static void * nfs_follow_mountpoint(struct dentry *dentry, struct nameidata *nd)
                 goto out_err;
 
         mntget(mnt);
-        err = do_add_mount(mnt, nd, nd->path.mnt->mnt_flags|MNT_SHRINKABLE,
+        err = do_add_mount(mnt, &nd->path, nd->path.mnt->mnt_flags|MNT_SHRINKABLE,
                            &nfs_automount_list);
         if (err < 0) {
                 mntput(mnt);
diff --git a/fs/omfs/bitmap.c b/fs/omfs/bitmap.c
index dc75f22be3f2..697663b01bae 100644
--- a/fs/omfs/bitmap.c
+++ b/fs/omfs/bitmap.c
@@ -71,10 +71,10 @@ static int set_run(struct super_block *sb, int map,
                 }
                 if (set) {
                         set_bit(bit, sbi->s_imap[map]);
-                        set_bit(bit, (long *) bh->b_data);
+                        set_bit(bit, (unsigned long *)bh->b_data);
                 } else {
                         clear_bit(bit, sbi->s_imap[map]);
-                        clear_bit(bit, (long *) bh->b_data);
+                        clear_bit(bit, (unsigned long *)bh->b_data);
                 }
         }
         mark_buffer_dirty(bh);
@@ -109,7 +109,7 @@ int omfs_allocate_block(struct super_block *sb, u64 block)
                 if (!bh)
                         goto out;
 
-                set_bit(bit, (long *) bh->b_data);
+                set_bit(bit, (unsigned long *)bh->b_data);
                 mark_buffer_dirty(bh);
                 brelse(bh);
         }
diff --git a/fs/omfs/dir.c b/fs/omfs/dir.c
index 05a5bc31e4bd..c0757e998876 100644
--- a/fs/omfs/dir.c
+++ b/fs/omfs/dir.c
@@ -104,7 +104,7 @@ int omfs_make_empty(struct inode *inode, struct super_block *sb)
 
         oi = (struct omfs_inode *) bh->b_data;
         oi->i_head.h_self = cpu_to_be64(inode->i_ino);
-        oi->i_sibling = ~0ULL;
+        oi->i_sibling = ~cpu_to_be64(0ULL);
 
         mark_buffer_dirty(bh);
         brelse(bh);
diff --git a/fs/omfs/file.c b/fs/omfs/file.c
index 66e01fae4384..7e2499053e4d 100644
--- a/fs/omfs/file.c
+++ b/fs/omfs/file.c
@@ -30,11 +30,11 @@ void omfs_make_empty_table(struct buffer_head *bh, int offset)
 {
         struct omfs_extent *oe = (struct omfs_extent *) &bh->b_data[offset];
 
-        oe->e_next = ~0ULL;
+        oe->e_next = ~cpu_to_be64(0ULL);
         oe->e_extent_count = cpu_to_be32(1),
         oe->e_fill = cpu_to_be32(0x22),
-        oe->e_entry.e_cluster = ~0ULL;
-        oe->e_entry.e_blocks = ~0ULL;
+        oe->e_entry.e_cluster = ~cpu_to_be64(0ULL);
+        oe->e_entry.e_blocks = ~cpu_to_be64(0ULL);
 }
 
 int omfs_shrink_inode(struct inode *inode)
diff --git a/fs/open.c b/fs/open.c
index 52647be277a2..07da9359481c 100644
--- a/fs/open.c
+++ b/fs/open.c
@@ -963,62 +963,6 @@ struct file *dentry_open(struct dentry *dentry, struct vfsmount *mnt, int flags)
 }
 EXPORT_SYMBOL(dentry_open);
 
-/*
- * Find an empty file descriptor entry, and mark it busy.
- */
-int get_unused_fd_flags(int flags)
-{
-        struct files_struct * files = current->files;
-        int fd, error;
-        struct fdtable *fdt;
-
-        spin_lock(&files->file_lock);
-
-repeat:
-        fdt = files_fdtable(files);
-        fd = find_next_zero_bit(fdt->open_fds->fds_bits, fdt->max_fds,
-                                files->next_fd);
-
-        /* Do we need to expand the fd array or fd set?  */
-        error = expand_files(files, fd);
-        if (error < 0)
-                goto out;
-
-        if (error) {
-                /*
-                 * If we needed to expand the fs array we
-                 * might have blocked - try again.
-                 */
-                goto repeat;
-        }
-
-        FD_SET(fd, fdt->open_fds);
-        if (flags & O_CLOEXEC)
-                FD_SET(fd, fdt->close_on_exec);
-        else
-                FD_CLR(fd, fdt->close_on_exec);
-        files->next_fd = fd + 1;
-#if 1
-        /* Sanity check */
-        if (fdt->fd[fd] != NULL) {
-                printk(KERN_WARNING "get_unused_fd: slot %d not NULL!\n", fd);
-                fdt->fd[fd] = NULL;
-        }
-#endif
-        error = fd;
-
-out:
-        spin_unlock(&files->file_lock);
-        return error;
-}
-
-int get_unused_fd(void)
-{
-        return get_unused_fd_flags(0);
-}
-
-EXPORT_SYMBOL(get_unused_fd);
-
 static void __put_unused_fd(struct files_struct *files, unsigned int fd)
 {
         struct fdtable *fdt = files_fdtable(files);
diff --git a/fs/proc/generic.c b/fs/proc/generic.c
index cb4096cc3fb7..4fb81e9c94e3 100644
--- a/fs/proc/generic.c
+++ b/fs/proc/generic.c
@@ -300,10 +300,10 @@ out:
         return rtn;
 }
 
-static DEFINE_IDR(proc_inum_idr);
+static DEFINE_IDA(proc_inum_ida);
 static DEFINE_SPINLOCK(proc_inum_lock); /* protects the above */
 
-#define PROC_DYNAMIC_FIRST 0xF0000000UL
+#define PROC_DYNAMIC_FIRST 0xF0000000U
 
 /*
  * Return an inode number between PROC_DYNAMIC_FIRST and
@@ -311,36 +311,33 @@ static DEFINE_SPINLOCK(proc_inum_lock); /* protects the above */
  */
 static unsigned int get_inode_number(void)
 {
-        int i, inum = 0;
+        unsigned int i;
         int error;
 
 retry:
-        if (idr_pre_get(&proc_inum_idr, GFP_KERNEL) == 0)
+        if (ida_pre_get(&proc_inum_ida, GFP_KERNEL) == 0)
                 return 0;
 
         spin_lock(&proc_inum_lock);
-        error = idr_get_new(&proc_inum_idr, NULL, &i);
+        error = ida_get_new(&proc_inum_ida, &i);
         spin_unlock(&proc_inum_lock);
         if (error == -EAGAIN)
                 goto retry;
         else if (error)
                 return 0;
 
-        inum = (i & MAX_ID_MASK) + PROC_DYNAMIC_FIRST;
-
-        /* inum will never be more than 0xf0ffffff, so no check
-         * for overflow.
-         */
-
-        return inum;
+        if (i > UINT_MAX - PROC_DYNAMIC_FIRST) {
+                spin_lock(&proc_inum_lock);
+                ida_remove(&proc_inum_ida, i);
+                spin_unlock(&proc_inum_lock);
+        }
+        return PROC_DYNAMIC_FIRST + i;
 }
 
 static void release_inode_number(unsigned int inum)
 {
-        int id = (inum - PROC_DYNAMIC_FIRST) | ~MAX_ID_MASK;
-
         spin_lock(&proc_inum_lock);
-        idr_remove(&proc_inum_idr, id);
+        ida_remove(&proc_inum_ida, inum - PROC_DYNAMIC_FIRST);
         spin_unlock(&proc_inum_lock);
 }
 
diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c
index 879e54d35c2d..282a13596c70 100644
--- a/fs/reiserfs/super.c
+++ b/fs/reiserfs/super.c
@@ -2076,8 +2076,8 @@ static int reiserfs_quota_on(struct super_block *sb, int type, int format_id,
                 return err;
         /* Quotafile not on the same filesystem? */
         if (nd.path.mnt->mnt_sb != sb) {
-                path_put(&nd.path);
-                return -EXDEV;
+                err = -EXDEV;
+                goto out;
         }
         inode = nd.path.dentry->d_inode;
         /* We must not pack tails for quota files on reiserfs for quota IO to work */
@@ -2087,8 +2087,8 @@ static int reiserfs_quota_on(struct super_block *sb, int type, int format_id,
                         reiserfs_warning(sb,
                                 "reiserfs: Unpacking tail of quota file failed"
                                 " (%d). Cannot turn on quotas.", err);
-                        path_put(&nd.path);
-                        return -EINVAL;
+                        err = -EINVAL;
+                        goto out;
                 }
                 mark_inode_dirty(inode);
         }
@@ -2109,13 +2109,15 @@ static int reiserfs_quota_on(struct super_block *sb, int type, int format_id,
                 /* Just start temporary transaction and finish it */
                 err = journal_begin(&th, sb, 1);
                 if (err)
-                        return err;
+                        goto out;
                 err = journal_end_sync(&th, sb, 1);
                 if (err)
-                        return err;
+                        goto out;
         }
+        err = vfs_quota_on_path(sb, type, format_id, &nd.path);
+out:
         path_put(&nd.path);
-        return vfs_quota_on(sb, type, format_id, path, 0);
+        return err;
 }
 
 /* Read data from quotafile - avoid pagecache and such because we cannot afford
diff --git a/fs/romfs/inode.c b/fs/romfs/inode.c
index 8e51a2aaa977..60d2f822e87b 100644
--- a/fs/romfs/inode.c
+++ b/fs/romfs/inode.c
@@ -418,7 +418,8 @@ static int
 romfs_readpage(struct file *file, struct page * page)
 {
         struct inode *inode = page->mapping->host;
-        loff_t offset, avail, readlen;
+        loff_t offset, size;
+        unsigned long filled;
         void *buf;
         int result = -EIO;
 
@@ -430,21 +431,29 @@ romfs_readpage(struct file *file, struct page * page)
 
         /* 32 bit warning -- but not for us :) */
         offset = page_offset(page);
-        if (offset < i_size_read(inode)) {
-                avail = inode->i_size-offset;
-                readlen = min_t(unsigned long, avail, PAGE_SIZE);
-                if (romfs_copyfrom(inode, buf, ROMFS_I(inode)->i_dataoffset+offset, readlen) == readlen) {
-                        if (readlen < PAGE_SIZE) {
-                                memset(buf + readlen,0,PAGE_SIZE-readlen);
-                        }
-                        SetPageUptodate(page);
-                        result = 0;
+        size = i_size_read(inode);
+        filled = 0;
+        result = 0;
+        if (offset < size) {
+                unsigned long readlen;
+
+                size -= offset;
+                readlen = size > PAGE_SIZE ? PAGE_SIZE : size;
+
+                filled = romfs_copyfrom(inode, buf, ROMFS_I(inode)->i_dataoffset+offset, readlen);
+
+                if (filled != readlen) {
+                        SetPageError(page);
+                        filled = 0;
+                        result = -EIO;
                 }
         }
-        if (result) {
-                memset(buf, 0, PAGE_SIZE);
-                SetPageError(page);
-        }
+
+        if (filled < PAGE_SIZE)
+                memset(buf + filled, 0, PAGE_SIZE-filled);
+
+        if (!result)
+                SetPageUptodate(page);
         flush_dcache_page(page);
 
         unlock_page(page);
diff --git a/include/acpi/actbl.h b/include/acpi/actbl.h
index 1ebbe883f786..13a3d9ad92db 100644
--- a/include/acpi/actbl.h
+++ b/include/acpi/actbl.h
@@ -277,6 +277,7 @@ enum acpi_prefered_pm_profiles {
 #define BAF_LEGACY_DEVICES              0x0001
 #define BAF_8042_KEYBOARD_CONTROLLER    0x0002
 #define BAF_MSI_NOT_SUPPORTED           0x0008
+#define BAF_PCIE_ASPM_CONTROL           0x0010
 
 #define FADT2_REVISION_ID               3
 #define FADT2_MINUS_REVISION_ID         2
diff --git a/include/asm-arm/arch-s3c2410/spi.h b/include/asm-arm/arch-s3c2410/spi.h
index 352d33860b63..442169887d3b 100644
--- a/include/asm-arm/arch-s3c2410/spi.h
+++ b/include/asm-arm/arch-s3c2410/spi.h
@@ -16,6 +16,7 @@
 struct s3c2410_spi_info {
         unsigned long            pin_cs;        /* simple gpio cs */
         unsigned int             num_cs;        /* total chipselects */
+        int                      bus_num;       /* bus number to use. */
 
         void (*set_cs)(struct s3c2410_spi_info *spi, int cs, int pol);
 };
diff --git a/include/asm-arm/dma-mapping.h b/include/asm-arm/dma-mapping.h
index f41335ba6337..45329fca1b64 100644
--- a/include/asm-arm/dma-mapping.h
+++ b/include/asm-arm/dma-mapping.h
@@ -7,6 +7,8 @@
 
 #include <linux/scatterlist.h>
 
+#include <asm-generic/dma-coherent.h>
+
 /*
  * DMA-consistent mapping functions.  These allocate/free a region of
  * uncached, unwrite-buffered mapped memory space for use with DMA
diff --git a/include/asm-arm/plat-s3c/iic.h b/include/asm-arm/plat-s3c/iic.h
index 71211c8b5384..d08a1f2863e4 100644
--- a/include/asm-arm/plat-s3c/iic.h
+++ b/include/asm-arm/plat-s3c/iic.h
@@ -21,6 +21,7 @@
 */
 
 struct s3c2410_platform_i2c {
+        int             bus_num;        /* bus number to use */
         unsigned int    flags;
         unsigned int    slave_addr;     /* slave address for controller */
         unsigned long   bus_freq;       /* standard bus frequency */
diff --git a/include/asm-cris/dma-mapping.h b/include/asm-cris/dma-mapping.h
index cb2fb25ff8d9..da8ef8e8f842 100644
--- a/include/asm-cris/dma-mapping.h
+++ b/include/asm-cris/dma-mapping.h
@@ -14,6 +14,8 @@
 #define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
 
 #ifdef CONFIG_PCI
+#include <asm-generic/dma-coherent.h>
+
 void *dma_alloc_coherent(struct device *dev, size_t size,
                            dma_addr_t *dma_handle, gfp_t flag);
 
diff --git a/include/asm-generic/dma-coherent.h b/include/asm-generic/dma-coherent.h
new file mode 100644
index 000000000000..85a3ffaa0242
--- /dev/null
+++ b/include/asm-generic/dma-coherent.h
@@ -0,0 +1,32 @@
+#ifndef DMA_COHERENT_H
+#define DMA_COHERENT_H
+
+#ifdef CONFIG_HAVE_GENERIC_DMA_COHERENT
+/*
+ * These two functions are only for dma allocator.
+ * Don't use them in device drivers.
+ */
+int dma_alloc_from_coherent(struct device *dev, ssize_t size,
+                                       dma_addr_t *dma_handle, void **ret);
+int dma_release_from_coherent(struct device *dev, int order, void *vaddr);
+
+/*
+ * Standard interface
+ */
+#define ARCH_HAS_DMA_DECLARE_COHERENT_MEMORY
+extern int
+dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr,
+                            dma_addr_t device_addr, size_t size, int flags);
+
+extern void
+dma_release_declared_memory(struct device *dev);
+
+extern void *
+dma_mark_declared_memory_occupied(struct device *dev,
+                                  dma_addr_t device_addr, size_t size);
+#else
+#define dma_alloc_from_coherent(dev, size, handle, ret) (0)
+#define dma_release_from_coherent(dev, order, vaddr) (0)
+#endif
+
+#endif
diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h
index c764a8fcb058..0f99ad38b012 100644
--- a/include/asm-generic/gpio.h
+++ b/include/asm-generic/gpio.h
@@ -2,6 +2,7 @@
 #define _ASM_GENERIC_GPIO_H
 
 #include <linux/types.h>
+#include <linux/errno.h>
 
 #ifdef CONFIG_GPIOLIB
 
diff --git a/include/asm-generic/pgtable-nopmd.h b/include/asm-generic/pgtable-nopmd.h
index 087325ede76c..a7cdc48e8b78 100644
--- a/include/asm-generic/pgtable-nopmd.h
+++ b/include/asm-generic/pgtable-nopmd.h
@@ -5,6 +5,8 @@
 
 #include <asm-generic/pgtable-nopud.h>
 
+struct mm_struct;
+
 #define __PAGETABLE_PMD_FOLDED
 
 /*
@@ -54,7 +56,9 @@ static inline pmd_t * pmd_offset(pud_t * pud, unsigned long address)
  * inside the pud, so has no extra memory associated with it.
  */
 #define pmd_alloc_one(mm, address)              NULL
-#define pmd_free(mm, x)                         do { } while (0)
+static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
+{
+}
 #define __pmd_free_tlb(tlb, x)                  do { } while (0)
 
 #undef  pmd_addr_end
diff --git a/include/asm-ia64/sn/mspec.h b/include/asm-ia64/sn/mspec.h
index dbe13c6121a8..c1d3c50c3223 100644
--- a/include/asm-ia64/sn/mspec.h
+++ b/include/asm-ia64/sn/mspec.h
@@ -4,7 +4,7 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (c) 2001-2004 Silicon Graphics, Inc.  All rights reserved.
+ * Copyright (c) 2001-2008 Silicon Graphics, Inc.  All rights reserved.
  */
 
 #ifndef _ASM_IA64_SN_MSPEC_H
@@ -32,26 +32,26 @@
 #ifdef __KERNEL__
 
 /*
- * Each Atomic Memory Operation (AMO formerly known as fetchop)
+ * Each Atomic Memory Operation (amo, formerly known as fetchop)
  * variable is 64 bytes long.  The first 8 bytes are used.  The
  * remaining 56 bytes are unaddressable due to the operation taking
  * that portion of the address.
  *
- * NOTE: The AMO_t _MUST_ be placed in either the first or second half
- * of the cache line.  The cache line _MUST NOT_ be used for anything
- * other than additional AMO_t entries.  This is because there are two
+ * NOTE: The amo structure _MUST_ be placed in either the first or second
+ * half of the cache line.  The cache line _MUST NOT_ be used for anything
+ * other than additional amo entries.  This is because there are two
  * addresses which reference the same physical cache line.  One will
  * be a cached entry with the memory type bits all set.  This address
- * may be loaded into processor cache.  The AMO_t will be referenced
+ * may be loaded into processor cache.  The amo will be referenced
  * uncached via the memory special memory type.  If any portion of the
  * cached cache-line is modified, when that line is flushed, it will
  * overwrite the uncached value in physical memory and lead to
  * inconsistency.
  */
-typedef struct {
+struct amo {
         u64 variable;
         u64 unused[7];
-} AMO_t;
+};
 
 
 #endif /* __KERNEL__ */
diff --git a/include/asm-mips/gdb-stub.h b/include/asm-mips/gdb-stub.h
deleted file mode 100644
index 22f67d4a71ab..000000000000
--- a/include/asm-mips/gdb-stub.h
+++ /dev/null
@@ -1,215 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1995 Andreas Busse
- * Copyright (C) 2003 Ralf Baechle
- */
-#ifndef _ASM_GDB_STUB_H
-#define _ASM_GDB_STUB_H
-
-
-/*
- * important register numbers
- */
-
-#define REG_EPC                 37
-#define REG_FP                  72
-#define REG_SP                  29
-
-/*
- * Stack layout for the GDB exception handler
- * Derived from the stack layout described in asm-mips/stackframe.h
- *
- * The first PTRSIZE*6 bytes are argument save space for C subroutines.
- */
-#define NUMREGS                 90
-
-#define GDB_FR_REG0             (PTRSIZE*6)                     /* 0 */
-#define GDB_FR_REG1             ((GDB_FR_REG0) + LONGSIZE)      /* 1 */
-#define GDB_FR_REG2             ((GDB_FR_REG1) + LONGSIZE)      /* 2 */
-#define GDB_FR_REG3             ((GDB_FR_REG2) + LONGSIZE)      /* 3 */
-#define GDB_FR_REG4             ((GDB_FR_REG3) + LONGSIZE)      /* 4 */
-#define GDB_FR_REG5             ((GDB_FR_REG4) + LONGSIZE)      /* 5 */
-#define GDB_FR_REG6             ((GDB_FR_REG5) + LONGSIZE)      /* 6 */
-#define GDB_FR_REG7             ((GDB_FR_REG6) + LONGSIZE)      /* 7 */
-#define GDB_FR_REG8             ((GDB_FR_REG7) + LONGSIZE)      /* 8 */
-#define GDB_FR_REG9             ((GDB_FR_REG8) + LONGSIZE)      /* 9 */
-#define GDB_FR_REG10            ((GDB_FR_REG9) + LONGSIZE)      /* 10 */
-#define GDB_FR_REG11            ((GDB_FR_REG10) + LONGSIZE)     /* 11 */
-#define GDB_FR_REG12            ((GDB_FR_REG11) + LONGSIZE)     /* 12 */
-#define GDB_FR_REG13            ((GDB_FR_REG12) + LONGSIZE)     /* 13 */
-#define GDB_FR_REG14            ((GDB_FR_REG13) + LONGSIZE)     /* 14 */
-#define GDB_FR_REG15            ((GDB_FR_REG14) + LONGSIZE)     /* 15 */
-#define GDB_FR_REG16            ((GDB_FR_REG15) + LONGSIZE)     /* 16 */
-#define GDB_FR_REG17            ((GDB_FR_REG16) + LONGSIZE)     /* 17 */
-#define GDB_FR_REG18            ((GDB_FR_REG17) + LONGSIZE)     /* 18 */
-#define GDB_FR_REG19            ((GDB_FR_REG18) + LONGSIZE)     /* 19 */
-#define GDB_FR_REG20            ((GDB_FR_REG19) + LONGSIZE)     /* 20 */
-#define GDB_FR_REG21            ((GDB_FR_REG20) + LONGSIZE)     /* 21 */
-#define GDB_FR_REG22            ((GDB_FR_REG21) + LONGSIZE)     /* 22 */
-#define GDB_FR_REG23            ((GDB_FR_REG22) + LONGSIZE)     /* 23 */
-#define GDB_FR_REG24            ((GDB_FR_REG23) + LONGSIZE)     /* 24 */
-#define GDB_FR_REG25            ((GDB_FR_REG24) + LONGSIZE)     /* 25 */
-#define GDB_FR_REG26            ((GDB_FR_REG25) + LONGSIZE)     /* 26 */
-#define GDB_FR_REG27            ((GDB_FR_REG26) + LONGSIZE)     /* 27 */
-#define GDB_FR_REG28            ((GDB_FR_REG27) + LONGSIZE)     /* 28 */
-#define GDB_FR_REG29            ((GDB_FR_REG28) + LONGSIZE)     /* 29 */
-#define GDB_FR_REG30            ((GDB_FR_REG29) + LONGSIZE)     /* 30 */
-#define GDB_FR_REG31            ((GDB_FR_REG30) + LONGSIZE)     /* 31 */
-
-/*
- * Saved special registers
- */
-#define GDB_FR_STATUS           ((GDB_FR_REG31) + LONGSIZE)     /* 32 */
-#define GDB_FR_LO               ((GDB_FR_STATUS) + LONGSIZE)    /* 33 */
-#define GDB_FR_HI               ((GDB_FR_LO) + LONGSIZE)        /* 34 */
-#define GDB_FR_BADVADDR         ((GDB_FR_HI) + LONGSIZE)        /* 35 */
-#define GDB_FR_CAUSE            ((GDB_FR_BADVADDR) + LONGSIZE)  /* 36 */
-#define GDB_FR_EPC              ((GDB_FR_CAUSE) + LONGSIZE)     /* 37 */
-
-/*
- * Saved floating point registers
- */
-#define GDB_FR_FPR0             ((GDB_FR_EPC) + LONGSIZE)       /* 38 */
-#define GDB_FR_FPR1             ((GDB_FR_FPR0) + LONGSIZE)      /* 39 */
-#define GDB_FR_FPR2             ((GDB_FR_FPR1) + LONGSIZE)      /* 40 */
-#define GDB_FR_FPR3             ((GDB_FR_FPR2) + LONGSIZE)      /* 41 */
-#define GDB_FR_FPR4             ((GDB_FR_FPR3) + LONGSIZE)      /* 42 */
-#define GDB_FR_FPR5             ((GDB_FR_FPR4) + LONGSIZE)      /* 43 */
-#define GDB_FR_FPR6             ((GDB_FR_FPR5) + LONGSIZE)      /* 44 */
-#define GDB_FR_FPR7             ((GDB_FR_FPR6) + LONGSIZE)      /* 45 */
-#define GDB_FR_FPR8             ((GDB_FR_FPR7) + LONGSIZE)      /* 46 */
-#define GDB_FR_FPR9             ((GDB_FR_FPR8) + LONGSIZE)      /* 47 */
-#define GDB_FR_FPR10            ((GDB_FR_FPR9) + LONGSIZE)      /* 48 */
-#define GDB_FR_FPR11            ((GDB_FR_FPR10) + LONGSIZE)     /* 49 */
-#define GDB_FR_FPR12            ((GDB_FR_FPR11) + LONGSIZE)     /* 50 */
-#define GDB_FR_FPR13            ((GDB_FR_FPR12) + LONGSIZE)     /* 51 */
-#define GDB_FR_FPR14            ((GDB_FR_FPR13) + LONGSIZE)     /* 52 */
-#define GDB_FR_FPR15            ((GDB_FR_FPR14) + LONGSIZE)     /* 53 */
-#define GDB_FR_FPR16            ((GDB_FR_FPR15) + LONGSIZE)     /* 54 */
-#define GDB_FR_FPR17            ((GDB_FR_FPR16) + LONGSIZE)     /* 55 */
-#define GDB_FR_FPR18            ((GDB_FR_FPR17) + LONGSIZE)     /* 56 */
-#define GDB_FR_FPR19            ((GDB_FR_FPR18) + LONGSIZE)     /* 57 */
-#define GDB_FR_FPR20            ((GDB_FR_FPR19) + LONGSIZE)     /* 58 */
-#define GDB_FR_FPR21            ((GDB_FR_FPR20) + LONGSIZE)     /* 59 */
-#define GDB_FR_FPR22            ((GDB_FR_FPR21) + LONGSIZE)     /* 60 */
-#define GDB_FR_FPR23            ((GDB_FR_FPR22) + LONGSIZE)     /* 61 */
-#define GDB_FR_FPR24            ((GDB_FR_FPR23) + LONGSIZE)     /* 62 */
-#define GDB_FR_FPR25            ((GDB_FR_FPR24) + LONGSIZE)     /* 63 */
-#define GDB_FR_FPR26            ((GDB_FR_FPR25) + LONGSIZE)     /* 64 */
-#define GDB_FR_FPR27            ((GDB_FR_FPR26) + LONGSIZE)     /* 65 */
-#define GDB_FR_FPR28            ((GDB_FR_FPR27) + LONGSIZE)     /* 66 */
-#define GDB_FR_FPR29            ((GDB_FR_FPR28) + LONGSIZE)     /* 67 */
-#define GDB_FR_FPR30            ((GDB_FR_FPR29) + LONGSIZE)     /* 68 */
-#define GDB_FR_FPR31            ((GDB_FR_FPR30) + LONGSIZE)     /* 69 */
-
-#define GDB_FR_FSR              ((GDB_FR_FPR31) + LONGSIZE)     /* 70 */
-#define GDB_FR_FIR              ((GDB_FR_FSR) + LONGSIZE)       /* 71 */
-#define GDB_FR_FRP              ((GDB_FR_FIR) + LONGSIZE)       /* 72 */
-
-#define GDB_FR_DUMMY            ((GDB_FR_FRP) + LONGSIZE)       /* 73, unused ??? */
-
-/*
- * Again, CP0 registers
- */
-#define GDB_FR_CP0_INDEX        ((GDB_FR_DUMMY) + LONGSIZE)     /* 74 */
-#define GDB_FR_CP0_RANDOM       ((GDB_FR_CP0_INDEX) + LONGSIZE) /* 75 */
-#define GDB_FR_CP0_ENTRYLO0     ((GDB_FR_CP0_RANDOM) + LONGSIZE)/* 76 */
-#define GDB_FR_CP0_ENTRYLO1     ((GDB_FR_CP0_ENTRYLO0) + LONGSIZE)/* 77 */
-#define GDB_FR_CP0_CONTEXT      ((GDB_FR_CP0_ENTRYLO1) + LONGSIZE)/* 78 */
-#define GDB_FR_CP0_PAGEMASK     ((GDB_FR_CP0_CONTEXT) + LONGSIZE)/* 79 */
-#define GDB_FR_CP0_WIRED        ((GDB_FR_CP0_PAGEMASK) + LONGSIZE)/* 80 */
-#define GDB_FR_CP0_REG7         ((GDB_FR_CP0_WIRED) + LONGSIZE) /* 81 */
-#define GDB_FR_CP0_REG8         ((GDB_FR_CP0_REG7) + LONGSIZE)  /* 82 */
-#define GDB_FR_CP0_REG9         ((GDB_FR_CP0_REG8) + LONGSIZE)  /* 83 */
-#define GDB_FR_CP0_ENTRYHI      ((GDB_FR_CP0_REG9) + LONGSIZE)  /* 84 */
-#define GDB_FR_CP0_REG11        ((GDB_FR_CP0_ENTRYHI) + LONGSIZE)/* 85 */
-#define GDB_FR_CP0_REG12        ((GDB_FR_CP0_REG11) + LONGSIZE) /* 86 */
-#define GDB_FR_CP0_REG13        ((GDB_FR_CP0_REG12) + LONGSIZE) /* 87 */
-#define GDB_FR_CP0_REG14        ((GDB_FR_CP0_REG13) + LONGSIZE) /* 88 */
-#define GDB_FR_CP0_PRID         ((GDB_FR_CP0_REG14) + LONGSIZE) /* 89 */
-
-#define GDB_FR_SIZE             ((((GDB_FR_CP0_PRID) + LONGSIZE) + (PTRSIZE-1)) & ~(PTRSIZE-1))
-
-#ifndef __ASSEMBLY__
-
-/*
- * This is the same as above, but for the high-level
- * part of the GDB stub.
- */
-
-struct gdb_regs {
-        /*
-         * Pad bytes for argument save space on the stack
-         * 24/48 Bytes for 32/64 bit code
-         */
-        unsigned long pad0[6];
-
-        /*
-         * saved main processor registers
-         */
-        long     reg0,  reg1,  reg2,  reg3,  reg4,  reg5,  reg6,  reg7;
-        long     reg8,  reg9, reg10, reg11, reg12, reg13, reg14, reg15;
-        long    reg16, reg17, reg18, reg19, reg20, reg21, reg22, reg23;
-        long    reg24, reg25, reg26, reg27, reg28, reg29, reg30, reg31;
-
-        /*
-         * Saved special registers
-         */
-        long    cp0_status;
-        long    lo;
-        long    hi;
-        long    cp0_badvaddr;
-        long    cp0_cause;
-        long    cp0_epc;
-
-        /*
-         * Saved floating point registers
-         */
-        long    fpr0,  fpr1,  fpr2,  fpr3,  fpr4,  fpr5,  fpr6,  fpr7;
-        long    fpr8,  fpr9,  fpr10, fpr11, fpr12, fpr13, fpr14, fpr15;
-        long    fpr16, fpr17, fpr18, fpr19, fpr20, fpr21, fpr22, fpr23;
-        long    fpr24, fpr25, fpr26, fpr27, fpr28, fpr29, fpr30, fpr31;
-
-        long    cp1_fsr;
-        long    cp1_fir;
-
-        /*
-         * Frame pointer
-         */
-        long    frame_ptr;
-        long    dummy;          /* unused */
-
-        /*
-         * saved cp0 registers
-         */
-        long    cp0_index;
-        long    cp0_random;
-        long    cp0_entrylo0;
-        long    cp0_entrylo1;
-        long    cp0_context;
-        long    cp0_pagemask;
-        long    cp0_wired;
-        long    cp0_reg7;
-        long    cp0_reg8;
-        long    cp0_reg9;
-        long    cp0_entryhi;
-        long    cp0_reg11;
-        long    cp0_reg12;
-        long    cp0_reg13;
-        long    cp0_reg14;
-        long    cp0_prid;
-};
-
-/*
- * Prototypes
- */
-
-extern int kgdb_enabled;
-void set_debug_traps(void);
-void set_async_breakpoint(unsigned long *epc);
-
-#endif /* !__ASSEMBLY__ */
-#endif /* _ASM_GDB_STUB_H */
diff --git a/include/asm-mips/kdebug.h b/include/asm-mips/kdebug.h
index 6ece1b037665..5bf62aafc890 100644
--- a/include/asm-mips/kdebug.h
+++ b/include/asm-mips/kdebug.h
@@ -1 +1,13 @@
-#include <asm-generic/kdebug.h>
+#ifndef _ASM_MIPS_KDEBUG_H
+#define _ASM_MIPS_KDEBUG_H
+
+#include <linux/notifier.h>
+
+enum die_val {
+        DIE_OOPS = 1,
+        DIE_FP,
+        DIE_TRAP,
+        DIE_RI,
+};
+
+#endif /* _ASM_MIPS_KDEBUG_H */
diff --git a/include/asm-mips/kgdb.h b/include/asm-mips/kgdb.h
new file mode 100644
index 000000000000..48223b09396c
--- /dev/null
+++ b/include/asm-mips/kgdb.h
@@ -0,0 +1,44 @@
+#ifndef __ASM_KGDB_H_
+#define __ASM_KGDB_H_
+
+#ifdef __KERNEL__
+
+#include <asm/sgidefs.h>
+
+#if (_MIPS_ISA == _MIPS_ISA_MIPS1) || (_MIPS_ISA == _MIPS_ISA_MIPS2) || \
+        (_MIPS_ISA == _MIPS_ISA_MIPS32)
+
+#define KGDB_GDB_REG_SIZE 32
+
+#elif (_MIPS_ISA == _MIPS_ISA_MIPS3) || (_MIPS_ISA == _MIPS_ISA_MIPS4) || \
+        (_MIPS_ISA == _MIPS_ISA_MIPS64)
+
+#ifdef CONFIG_32BIT
+#define KGDB_GDB_REG_SIZE 32
+#else /* CONFIG_CPU_32BIT */
+#define KGDB_GDB_REG_SIZE 64
+#endif
+#else
+#error "Need to set KGDB_GDB_REG_SIZE for MIPS ISA"
+#endif /* _MIPS_ISA */
+
+#define BUFMAX                  2048
+#if (KGDB_GDB_REG_SIZE == 32)
+#define NUMREGBYTES             (90*sizeof(u32))
+#define NUMCRITREGBYTES         (12*sizeof(u32))
+#else
+#define NUMREGBYTES             (90*sizeof(u64))
+#define NUMCRITREGBYTES         (12*sizeof(u64))
+#endif
+#define BREAK_INSTR_SIZE        4
+#define CACHE_FLUSH_IS_SAFE     0
+
+extern void arch_kgdb_breakpoint(void);
+extern int kgdb_early_setup;
+extern void *saved_vectors[32];
+extern void handle_exception(struct pt_regs *regs);
+extern void breakinst(void);
+
+#endif                          /* __KERNEL__ */
+
+#endif /* __ASM_KGDB_H_ */
diff --git a/include/asm-mips/pci.h b/include/asm-mips/pci.h
index c205875d7f31..5510c53b7feb 100644
--- a/include/asm-mips/pci.h
+++ b/include/asm-mips/pci.h
@@ -174,4 +174,6 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
 
 extern int pci_probe_only;
 
+extern char * (*pcibios_plat_setup)(char *str);
+
 #endif /* _ASM_PCI_H */
diff --git a/include/asm-mips/txx9/generic.h b/include/asm-mips/txx9/generic.h
index cbae37ec3d88..5b1ccf901c62 100644
--- a/include/asm-mips/txx9/generic.h
+++ b/include/asm-mips/txx9/generic.h
@@ -44,5 +44,19 @@ extern struct txx9_board_vec *txx9_board_vec;
 extern int (*txx9_irq_dispatch)(int pending);
 void prom_init_cmdline(void);
 char *prom_getcmdline(void);
+void txx9_wdt_init(unsigned long base);
+void txx9_spi_init(int busid, unsigned long base, int irq);
+void txx9_ethaddr_init(unsigned int id, unsigned char *ethaddr);
+void txx9_sio_init(unsigned long baseaddr, int irq,
+                   unsigned int line, unsigned int sclk, int nocts);
+void prom_putchar(char c);
+#ifdef CONFIG_EARLY_PRINTK
+extern void (*txx9_prom_putchar)(char c);
+void txx9_sio_putchar_init(unsigned long baseaddr);
+#else
+static inline void txx9_sio_putchar_init(unsigned long baseaddr)
+{
+}
+#endif
 
 #endif /* __ASM_TXX9_GENERIC_H */
diff --git a/include/asm-mips/txx9/jmr3927.h b/include/asm-mips/txx9/jmr3927.h
index d6eb1b6a54eb..a409c446bf18 100644
--- a/include/asm-mips/txx9/jmr3927.h
+++ b/include/asm-mips/txx9/jmr3927.h
@@ -149,8 +149,6 @@
 
 /* Clocks */
 #define JMR3927_CORECLK 132710400       /* 132.7MHz */
-#define JMR3927_GBUSCLK (JMR3927_CORECLK / 2)   /* 66.35MHz */
-#define JMR3927_IMCLK   (JMR3927_CORECLK / 4)   /* 33.17MHz */
 
 /*
  * TX3927 Pin Configuration:
diff --git a/include/asm-mips/txx9/pci.h b/include/asm-mips/txx9/pci.h
index d89a45091e24..3d32529060aa 100644
--- a/include/asm-mips/txx9/pci.h
+++ b/include/asm-mips/txx9/pci.h
@@ -33,4 +33,7 @@ enum txx9_pci_err_action {
 };
 extern enum txx9_pci_err_action txx9_pci_err_action;
 
+extern char * (*txx9_board_pcibios_setup)(char *str);
+char *txx9_pcibios_setup(char *str);
+
 #endif /* __ASM_TXX9_PCI_H */
diff --git a/include/asm-mips/txx9/smsc_fdc37m81x.h b/include/asm-mips/txx9/smsc_fdc37m81x.h
index 9375e4fc2289..02e161d0755d 100644
--- a/include/asm-mips/txx9/smsc_fdc37m81x.h
+++ b/include/asm-mips/txx9/smsc_fdc37m81x.h
@@ -56,7 +56,7 @@
 #define SMSC_FDC37M81X_CONFIG_EXIT   0xaa
 #define SMSC_FDC37M81X_CHIP_ID       0x4d
 
-unsigned long __init smsc_fdc37m81x_init(unsigned long port);
+unsigned long smsc_fdc37m81x_init(unsigned long port);
 
 void smsc_fdc37m81x_config_beg(void);
 
diff --git a/include/asm-mips/txx9/tx3927.h b/include/asm-mips/txx9/tx3927.h
index ea79e1b16e71..587deb9592d2 100644
--- a/include/asm-mips/txx9/tx3927.h
+++ b/include/asm-mips/txx9/tx3927.h
@@ -8,9 +8,8 @@
 #ifndef __ASM_TXX9_TX3927_H
 #define __ASM_TXX9_TX3927_H
 
-#include <asm/txx9/txx927.h>
-
 #define TX3927_REG_BASE 0xfffe0000UL
+#define TX3927_REG_SIZE 0x00010000
 #define TX3927_SDRAMC_REG       (TX3927_REG_BASE + 0x8000)
 #define TX3927_ROMC_REG         (TX3927_REG_BASE + 0x9000)
 #define TX3927_DMA_REG          (TX3927_REG_BASE + 0xb000)
@@ -236,11 +235,17 @@ struct tx3927_ccfg_reg {
 /* see PCI_STATUS_XXX in linux/pci.h */
 #define PCI_STATUS_NEW_CAP      0x0010
 
+/* bits for ISTAT/IIM */
+#define TX3927_PCIC_IIM_ALL     0x00001600
+
 /* bits for TC */
 #define TX3927_PCIC_TC_OF16E    0x00000020
 #define TX3927_PCIC_TC_IF8E     0x00000010
 #define TX3927_PCIC_TC_OF8E     0x00000008
 
+/* bits for TSTAT/TIM */
+#define TX3927_PCIC_TIM_ALL     0x0003ffff
+
 /* bits for IOBA/MBA */
 /* see PCI_BASE_ADDRESS_XXX in linux/pci.h */
 
@@ -313,12 +318,22 @@ struct tx3927_ccfg_reg {
 #define tx3927_dmaptr           ((struct tx3927_dma_reg *)TX3927_DMA_REG)
 #define tx3927_pcicptr          ((struct tx3927_pcic_reg *)TX3927_PCIC_REG)
 #define tx3927_ccfgptr          ((struct tx3927_ccfg_reg *)TX3927_CCFG_REG)
-#define tx3927_tmrptr(ch)       ((struct txx927_tmr_reg *)TX3927_TMR_REG(ch))
 #define tx3927_sioptr(ch)       ((struct txx927_sio_reg *)TX3927_SIO_REG(ch))
 #define tx3927_pioptr           ((struct txx9_pio_reg __iomem *)TX3927_PIO_REG)
 
+#define TX3927_REV_PCODE()      (tx3927_ccfgptr->crir >> 16)
+#define TX3927_ROMC_BA(ch)      (tx3927_romcptr->cr[(ch)] & 0xfff00000)
+#define TX3927_ROMC_SIZE(ch)    \
+        (0x00100000 << ((tx3927_romcptr->cr[(ch)] >> 8) & 0xf))
+
+void tx3927_wdt_init(void);
+void tx3927_setup(void);
+void tx3927_time_init(unsigned int evt_tmrnr, unsigned int src_tmrnr);
+void tx3927_sio_init(unsigned int sclk, unsigned int cts_mask);
 struct pci_controller;
-void __init tx3927_pcic_setup(struct pci_controller *channel,
-                              unsigned long sdram_size, int extarb);
+void tx3927_pcic_setup(struct pci_controller *channel,
+                       unsigned long sdram_size, int extarb);
+void tx3927_setup_pcierr_irq(void);
+void tx3927_irq_init(void);
 
 #endif /* __ASM_TXX9_TX3927_H */
diff --git a/include/asm-mips/txx9/tx4927.h b/include/asm-mips/txx9/tx4927.h
index ceb4b79ff4e3..195f6515db9a 100644
--- a/include/asm-mips/txx9/tx4927.h
+++ b/include/asm-mips/txx9/tx4927.h
@@ -243,12 +243,13 @@ static inline void tx4927_ccfg_change(__u64 change, __u64 new)
 }
 
 unsigned int tx4927_get_mem_size(void);
-void tx4927_wdr_init(void);
+void tx4927_wdt_init(void);
 void tx4927_setup(void);
 void tx4927_time_init(unsigned int tmrnr);
-void tx4927_setup_serial(void);
+void tx4927_sio_init(unsigned int sclk, unsigned int cts_mask);
 int tx4927_report_pciclk(void);
 int tx4927_pciclk66_setup(void);
+void tx4927_setup_pcierr_irq(void);
 void tx4927_irq_init(void);
 
 #endif /* __ASM_TXX9_TX4927_H */
diff --git a/include/asm-mips/txx9/tx4927pcic.h b/include/asm-mips/txx9/tx4927pcic.h
index d61c3d09c4a2..c470b8a5fe57 100644
--- a/include/asm-mips/txx9/tx4927pcic.h
+++ b/include/asm-mips/txx9/tx4927pcic.h
@@ -10,6 +10,7 @@
 #define __ASM_TXX9_TX4927PCIC_H
 
 #include <linux/pci.h>
+#include <linux/irqreturn.h>
 
 struct tx4927_pcic_reg {
         u32 pciid;
@@ -192,8 +193,11 @@ struct tx4927_pcic_reg {
 
 struct tx4927_pcic_reg __iomem *get_tx4927_pcicptr(
         struct pci_controller *channel);
-void __init tx4927_pcic_setup(struct tx4927_pcic_reg __iomem *pcicptr,
-                              struct pci_controller *channel, int extarb);
+void tx4927_pcic_setup(struct tx4927_pcic_reg __iomem *pcicptr,
+                       struct pci_controller *channel, int extarb);
 void tx4927_report_pcic_status(void);
+char *tx4927_pcibios_setup(char *str);
+void tx4927_dump_pcic_settings(void);
+irqreturn_t tx4927_pcierr_interrupt(int irq, void *dev_id);
 
 #endif /* __ASM_TXX9_TX4927PCIC_H */
diff --git a/include/asm-mips/txx9/tx4938.h b/include/asm-mips/txx9/tx4938.h
index 1ed969d381d6..8175d4ccbc39 100644
--- a/include/asm-mips/txx9/tx4938.h
+++ b/include/asm-mips/txx9/tx4938.h
@@ -276,15 +276,18 @@ struct tx4938_ccfg_reg {
 #define TX4938_EBUSC_SIZE(ch)   TX4927_EBUSC_SIZE(ch)
 
 #define tx4938_get_mem_size() tx4927_get_mem_size()
-void tx4938_wdr_init(void);
+void tx4938_wdt_init(void);
 void tx4938_setup(void);
 void tx4938_time_init(unsigned int tmrnr);
-void tx4938_setup_serial(void);
+void tx4938_sio_init(unsigned int sclk, unsigned int cts_mask);
+void tx4938_spi_init(int busid);
+void tx4938_ethaddr_init(unsigned char *addr0, unsigned char *addr1);
 int tx4938_report_pciclk(void);
 void tx4938_report_pci1clk(void);
 int tx4938_pciclk66_setup(void);
 struct pci_dev;
 int tx4938_pcic1_map_irq(const struct pci_dev *dev, u8 slot);
+void tx4938_setup_pcierr_irq(void);
 void tx4938_irq_init(void);
 
 #endif
diff --git a/include/asm-mips/txx9/txx927.h b/include/asm-mips/txx9/txx927.h
deleted file mode 100644
index 97dd7ad1a890..000000000000
--- a/include/asm-mips/txx9/txx927.h
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * Common definitions for TX3927/TX4927
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2000 Toshiba Corporation
- */
-#ifndef __ASM_TXX9_TXX927_H
-#define __ASM_TXX9_TXX927_H
-
-struct txx927_sio_reg {
-        volatile unsigned long lcr;
-        volatile unsigned long dicr;
-        volatile unsigned long disr;
-        volatile unsigned long cisr;
-        volatile unsigned long fcr;
-        volatile unsigned long flcr;
-        volatile unsigned long bgr;
-        volatile unsigned long tfifo;
-        volatile unsigned long rfifo;
-};
-
-/*
- * SIO
- */
-/* SILCR : Line Control */
-#define TXx927_SILCR_SCS_MASK   0x00000060
-#define TXx927_SILCR_SCS_IMCLK  0x00000000
-#define TXx927_SILCR_SCS_IMCLK_BG       0x00000020
-#define TXx927_SILCR_SCS_SCLK   0x00000040
-#define TXx927_SILCR_SCS_SCLK_BG        0x00000060
-#define TXx927_SILCR_UEPS       0x00000010
-#define TXx927_SILCR_UPEN       0x00000008
-#define TXx927_SILCR_USBL_MASK  0x00000004
-#define TXx927_SILCR_USBL_1BIT  0x00000004
-#define TXx927_SILCR_USBL_2BIT  0x00000000
-#define TXx927_SILCR_UMODE_MASK 0x00000003
-#define TXx927_SILCR_UMODE_8BIT 0x00000000
-#define TXx927_SILCR_UMODE_7BIT 0x00000001
-
-/* SIDICR : DMA/Int. Control */
-#define TXx927_SIDICR_TDE       0x00008000
-#define TXx927_SIDICR_RDE       0x00004000
-#define TXx927_SIDICR_TIE       0x00002000
-#define TXx927_SIDICR_RIE       0x00001000
-#define TXx927_SIDICR_SPIE      0x00000800
-#define TXx927_SIDICR_CTSAC     0x00000600
-#define TXx927_SIDICR_STIE_MASK 0x0000003f
-#define TXx927_SIDICR_STIE_OERS         0x00000020
-#define TXx927_SIDICR_STIE_CTSS         0x00000010
-#define TXx927_SIDICR_STIE_RBRKD        0x00000008
-#define TXx927_SIDICR_STIE_TRDY         0x00000004
-#define TXx927_SIDICR_STIE_TXALS        0x00000002
-#define TXx927_SIDICR_STIE_UBRKD        0x00000001
-
-/* SIDISR : DMA/Int. Status */
-#define TXx927_SIDISR_UBRK      0x00008000
-#define TXx927_SIDISR_UVALID    0x00004000
-#define TXx927_SIDISR_UFER      0x00002000
-#define TXx927_SIDISR_UPER      0x00001000
-#define TXx927_SIDISR_UOER      0x00000800
-#define TXx927_SIDISR_ERI       0x00000400
-#define TXx927_SIDISR_TOUT      0x00000200
-#define TXx927_SIDISR_TDIS      0x00000100
-#define TXx927_SIDISR_RDIS      0x00000080
-#define TXx927_SIDISR_STIS      0x00000040
-#define TXx927_SIDISR_RFDN_MASK 0x0000001f
-
-/* SICISR : Change Int. Status */
-#define TXx927_SICISR_OERS      0x00000020
-#define TXx927_SICISR_CTSS      0x00000010
-#define TXx927_SICISR_RBRKD     0x00000008
-#define TXx927_SICISR_TRDY      0x00000004
-#define TXx927_SICISR_TXALS     0x00000002
-#define TXx927_SICISR_UBRKD     0x00000001
-
-/* SIFCR : FIFO Control */
-#define TXx927_SIFCR_SWRST      0x00008000
-#define TXx927_SIFCR_RDIL_MASK  0x00000180
-#define TXx927_SIFCR_RDIL_1     0x00000000
-#define TXx927_SIFCR_RDIL_4     0x00000080
-#define TXx927_SIFCR_RDIL_8     0x00000100
-#define TXx927_SIFCR_RDIL_12    0x00000180
-#define TXx927_SIFCR_RDIL_MAX   0x00000180
-#define TXx927_SIFCR_TDIL_MASK  0x00000018
-#define TXx927_SIFCR_TDIL_MASK  0x00000018
-#define TXx927_SIFCR_TDIL_1     0x00000000
-#define TXx927_SIFCR_TDIL_4     0x00000001
-#define TXx927_SIFCR_TDIL_8     0x00000010
-#define TXx927_SIFCR_TDIL_MAX   0x00000010
-#define TXx927_SIFCR_TFRST      0x00000004
-#define TXx927_SIFCR_RFRST      0x00000002
-#define TXx927_SIFCR_FRSTE      0x00000001
-#define TXx927_SIO_TX_FIFO      8
-#define TXx927_SIO_RX_FIFO      16
-
-/* SIFLCR : Flow Control */
-#define TXx927_SIFLCR_RCS       0x00001000
-#define TXx927_SIFLCR_TES       0x00000800
-#define TXx927_SIFLCR_RTSSC     0x00000200
-#define TXx927_SIFLCR_RSDE      0x00000100
-#define TXx927_SIFLCR_TSDE      0x00000080
-#define TXx927_SIFLCR_RTSTL_MASK        0x0000001e
-#define TXx927_SIFLCR_RTSTL_MAX 0x0000001e
-#define TXx927_SIFLCR_TBRK      0x00000001
-
-/* SIBGR : Baudrate Control */
-#define TXx927_SIBGR_BCLK_MASK  0x00000300
-#define TXx927_SIBGR_BCLK_T0    0x00000000
-#define TXx927_SIBGR_BCLK_T2    0x00000100
-#define TXx927_SIBGR_BCLK_T4    0x00000200
-#define TXx927_SIBGR_BCLK_T6    0x00000300
-#define TXx927_SIBGR_BRD_MASK   0x000000ff
-
-/*
- * PIO
- */
-
-#endif /* __ASM_TXX9_TXX927_H */
diff --git a/include/asm-mips/txx9irq.h b/include/asm-mips/txx9irq.h
index 1c439e51b875..5620879be37f 100644
--- a/include/asm-mips/txx9irq.h
+++ b/include/asm-mips/txx9irq.h
@@ -14,8 +14,12 @@
 #ifdef CONFIG_IRQ_CPU
 #define TXX9_IRQ_BASE   (MIPS_CPU_IRQ_BASE + 8)
 #else
+#ifdef CONFIG_I8259
+#define TXX9_IRQ_BASE   (I8259A_IRQ_BASE + 16)
+#else
 #define TXX9_IRQ_BASE   0
 #endif
+#endif
 
 #ifdef CONFIG_CPU_TX39XX
 #define TXx9_MAX_IR 16
diff --git a/include/asm-powerpc/cpm.h b/include/asm-powerpc/cpm.h
index 63a55337c2de..24d79e3abd8e 100644
--- a/include/asm-powerpc/cpm.h
+++ b/include/asm-powerpc/cpm.h
@@ -3,6 +3,7 @@
 
 #include <linux/compiler.h>
 #include <linux/types.h>
+#include <linux/of.h>
 
 /* Opcodes common to CPM1 and CPM2
 */
@@ -100,4 +101,6 @@ unsigned long cpm_muram_offset(void __iomem *addr);
 dma_addr_t cpm_muram_dma(void __iomem *addr);
 int cpm_command(u32 command, u8 opcode);
 
+int cpm2_gpiochip_add32(struct device_node *np);
+
 #endif
diff --git a/include/asm-powerpc/cpm2.h b/include/asm-powerpc/cpm2.h
index 2c7fd9cee291..2a6fa0183ac9 100644
--- a/include/asm-powerpc/cpm2.h
+++ b/include/asm-powerpc/cpm2.h
@@ -12,6 +12,7 @@
 
 #include <asm/immap_cpm2.h>
 #include <asm/cpm.h>
+#include <sysdev/fsl_soc.h>
 
 #ifdef CONFIG_PPC_85xx
 #define CPM_MAP_ADDR (get_immrbase() + 0x80000)
@@ -93,10 +94,40 @@ extern cpm_cpm2_t __iomem *cpmp; /* Pointer to comm processor */
 #define cpm_dpfree cpm_muram_free
 #define cpm_dpram_addr cpm_muram_addr
 
-extern void cpm_setbrg(uint brg, uint rate);
-extern void cpm2_fastbrg(uint brg, uint rate, int div16);
 extern void cpm2_reset(void);
 
+/* Baud rate generators.
+*/
+#define CPM_BRG_RST             ((uint)0x00020000)
+#define CPM_BRG_EN              ((uint)0x00010000)
+#define CPM_BRG_EXTC_INT        ((uint)0x00000000)
+#define CPM_BRG_EXTC_CLK3_9     ((uint)0x00004000)
+#define CPM_BRG_EXTC_CLK5_15    ((uint)0x00008000)
+#define CPM_BRG_ATB             ((uint)0x00002000)
+#define CPM_BRG_CD_MASK         ((uint)0x00001ffe)
+#define CPM_BRG_DIV16           ((uint)0x00000001)
+
+#define CPM2_BRG_INT_CLK        (get_brgfreq())
+#define CPM2_BRG_UART_CLK       (CPM2_BRG_INT_CLK/16)
+
+extern void __cpm2_setbrg(uint brg, uint rate, uint clk, int div16, int src);
+
+/* This function is used by UARTS, or anything else that uses a 16x
+ * oversampled clock.
+ */
+static inline void cpm_setbrg(uint brg, uint rate)
+{
+        __cpm2_setbrg(brg, rate, CPM2_BRG_UART_CLK, 0, CPM_BRG_EXTC_INT);
+}
+
+/* This function is used to set high speed synchronous baud rate
+ * clocks.
+ */
+static inline void cpm2_fastbrg(uint brg, uint rate, int div16)
+{
+        __cpm2_setbrg(brg, rate, CPM2_BRG_INT_CLK, div16, CPM_BRG_EXTC_INT);
+}
+
 /* Function code bits, usually generic to devices.
 */
 #define CPMFCR_GBL      ((u_char)0x20)  /* Set memory snooping */
@@ -195,17 +226,6 @@ typedef struct smc_uart {
 #define SMCM_TX         ((unsigned char)0x02)
 #define SMCM_RX         ((unsigned char)0x01)
 
-/* Baud rate generators.
-*/
-#define CPM_BRG_RST             ((uint)0x00020000)
-#define CPM_BRG_EN              ((uint)0x00010000)
-#define CPM_BRG_EXTC_INT        ((uint)0x00000000)
-#define CPM_BRG_EXTC_CLK3_9     ((uint)0x00004000)
-#define CPM_BRG_EXTC_CLK5_15    ((uint)0x00008000)
-#define CPM_BRG_ATB             ((uint)0x00002000)
-#define CPM_BRG_CD_MASK         ((uint)0x00001ffe)
-#define CPM_BRG_DIV16           ((uint)0x00000001)
-
 /* SCCs.
 */
 #define SCC_GSMRH_IRP           ((uint)0x00040000)
diff --git a/include/asm-powerpc/pgtable-4k.h b/include/asm-powerpc/pgtable-4k.h
index c9601dfb4a1e..6b18ba9d2d85 100644
--- a/include/asm-powerpc/pgtable-4k.h
+++ b/include/asm-powerpc/pgtable-4k.h
@@ -46,6 +46,8 @@
 #define _PAGE_GROUP_IX  0x7000 /* software: HPTE index within group */
 #define _PAGE_F_SECOND  _PAGE_SECONDARY
 #define _PAGE_F_GIX     _PAGE_GROUP_IX
+#define _PAGE_SPECIAL   0x10000 /* software: special page */
+#define __HAVE_ARCH_PTE_SPECIAL
 
 /* PTE flags to conserve for HPTE identification */
 #define _PAGE_HPTEFLAGS (_PAGE_BUSY | _PAGE_HASHPTE | \
diff --git a/include/asm-powerpc/pgtable-64k.h b/include/asm-powerpc/pgtable-64k.h
index 7e54adb35596..07b0d8f09cb6 100644
--- a/include/asm-powerpc/pgtable-64k.h
+++ b/include/asm-powerpc/pgtable-64k.h
@@ -70,6 +70,8 @@ static inline struct subpage_prot_table *pgd_subpage_prot(pgd_t *pgd)
 #define PGDIR_MASK      (~(PGDIR_SIZE-1))
 
 /* Additional PTE bits (don't change without checking asm in hash_low.S) */
+#define __HAVE_ARCH_PTE_SPECIAL
+#define _PAGE_SPECIAL   0x00000400 /* software: special page */
 #define _PAGE_HPTE_SUB  0x0ffff000 /* combo only: sub pages HPTE bits */
 #define _PAGE_HPTE_SUB0 0x08000000 /* combo only: first sub page */
 #define _PAGE_COMBO     0x10000000 /* this is a combo 4k page */
diff --git a/include/asm-powerpc/pgtable-ppc32.h b/include/asm-powerpc/pgtable-ppc32.h
index bdbab72f3ebc..6fe39e327047 100644
--- a/include/asm-powerpc/pgtable-ppc32.h
+++ b/include/asm-powerpc/pgtable-ppc32.h
@@ -401,6 +401,9 @@ extern int icache_44x_need_flush;
 #ifndef _PAGE_COHERENT
 #define _PAGE_COHERENT  0
 #endif
+#ifndef _PAGE_WRITETHRU
+#define _PAGE_WRITETHRU 0
+#endif
 #ifndef _PMD_PRESENT_MASK
 #define _PMD_PRESENT_MASK       _PMD_PRESENT
 #endif
diff --git a/include/asm-powerpc/pgtable-ppc64.h b/include/asm-powerpc/pgtable-ppc64.h
index ba8000352b9a..74c6f380b805 100644
--- a/include/asm-powerpc/pgtable-ppc64.h
+++ b/include/asm-powerpc/pgtable-ppc64.h
@@ -245,7 +245,7 @@ static inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_RW;}
 static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY;}
 static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED;}
 static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE;}
-static inline int pte_special(pte_t pte) { return 0; }
+static inline int pte_special(pte_t pte) { return pte_val(pte) & _PAGE_SPECIAL; }
 
 static inline void pte_uncache(pte_t pte) { pte_val(pte) |= _PAGE_NO_CACHE; }
 static inline void pte_cache(pte_t pte)   { pte_val(pte) &= ~_PAGE_NO_CACHE; }
@@ -265,7 +265,7 @@ static inline pte_t pte_mkyoung(pte_t pte) {
 static inline pte_t pte_mkhuge(pte_t pte) {
         return pte; }
 static inline pte_t pte_mkspecial(pte_t pte) {
-        return pte; }
+        pte_val(pte) |= _PAGE_SPECIAL; return pte; }
 static inline unsigned long pte_pgprot(pte_t pte)
 {
         return __pgprot(pte_val(pte)) & PAGE_PROT_BITS;
@@ -461,6 +461,8 @@ void pgtable_cache_init(void);
         return pt;
 }
 
+pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long address);
+
 #endif /* __ASSEMBLY__ */
 
 #endif /* _ASM_POWERPC_PGTABLE_PPC64_H_ */
diff --git a/include/asm-powerpc/ptrace.h b/include/asm-powerpc/ptrace.h
index 3d6e31024e56..734e0754fb9b 100644
--- a/include/asm-powerpc/ptrace.h
+++ b/include/asm-powerpc/ptrace.h
@@ -84,6 +84,7 @@ struct pt_regs {
 #ifndef __ASSEMBLY__
 
 #define instruction_pointer(regs) ((regs)->nip)
+#define user_stack_pointer(regs) ((regs)->gpr[1])
 #define regs_return_value(regs) ((regs)->gpr[3])
 
 #ifdef CONFIG_SMP
diff --git a/include/asm-powerpc/signal.h b/include/asm-powerpc/signal.h
index a8c7babf4950..a7360cdd99eb 100644
--- a/include/asm-powerpc/signal.h
+++ b/include/asm-powerpc/signal.h
@@ -122,8 +122,7 @@ typedef struct sigaltstack {
 
 #ifdef __KERNEL__
 struct pt_regs;
-extern int do_signal(sigset_t *oldset, struct pt_regs *regs);
-extern int do_signal32(sigset_t *oldset, struct pt_regs *regs);
+extern void do_signal(struct pt_regs *regs, unsigned long thread_info_flags);
 #define ptrace_signal_deliver(regs, cookie) do { } while (0)
 #endif /* __KERNEL__ */
 
diff --git a/include/asm-powerpc/smp.h b/include/asm-powerpc/smp.h
index 416d4c288cea..4d28e1e4521b 100644
--- a/include/asm-powerpc/smp.h
+++ b/include/asm-powerpc/smp.h
@@ -62,6 +62,8 @@ extern int smp_hw_index[];
 #endif
 
 DECLARE_PER_CPU(cpumask_t, cpu_sibling_map);
+DECLARE_PER_CPU(cpumask_t, cpu_core_map);
+extern int cpu_to_core_id(int cpu);
 
 /* Since OpenPIC has only 4 IPIs, we use slightly different message numbers.
  *
diff --git a/include/asm-powerpc/syscall.h b/include/asm-powerpc/syscall.h
new file mode 100644
index 000000000000..efa7f0b879f3
--- /dev/null
+++ b/include/asm-powerpc/syscall.h
@@ -0,0 +1,84 @@
+/*
+ * Access to user system call parameters and results
+ *
+ * Copyright (C) 2008 Red Hat, Inc.  All rights reserved.
+ *
+ * This copyrighted material is made available to anyone wishing to use,
+ * modify, copy, or redistribute it subject to the terms and conditions
+ * of the GNU General Public License v.2.
+ *
+ * See asm-generic/syscall.h for descriptions of what we must do here.
+ */
+
+#ifndef _ASM_SYSCALL_H
+#define _ASM_SYSCALL_H  1
+
+#include <linux/sched.h>
+
+static inline long syscall_get_nr(struct task_struct *task,
+                                  struct pt_regs *regs)
+{
+        return TRAP(regs) == 0xc00 ? regs->gpr[0] : -1L;
+}
+
+static inline void syscall_rollback(struct task_struct *task,
+                                    struct pt_regs *regs)
+{
+        regs->gpr[3] = regs->orig_gpr3;
+}
+
+static inline long syscall_get_error(struct task_struct *task,
+                                     struct pt_regs *regs)
+{
+        return (regs->ccr & 0x1000) ? -regs->gpr[3] : 0;
+}
+
+static inline long syscall_get_return_value(struct task_struct *task,
+                                            struct pt_regs *regs)
+{
+        return regs->gpr[3];
+}
+
+static inline void syscall_set_return_value(struct task_struct *task,
+                                            struct pt_regs *regs,
+                                            int error, long val)
+{
+        if (error) {
+                regs->ccr |= 0x1000L;
+                regs->gpr[3] = -error;
+        } else {
+                regs->ccr &= ~0x1000L;
+                regs->gpr[3] = val;
+        }
+}
+
+static inline void syscall_get_arguments(struct task_struct *task,
+                                         struct pt_regs *regs,
+                                         unsigned int i, unsigned int n,
+                                         unsigned long *args)
+{
+        BUG_ON(i + n > 6);
+#ifdef CONFIG_PPC64
+        if (test_tsk_thread_flag(task, TIF_32BIT)) {
+                /*
+                 * Zero-extend 32-bit argument values.  The high bits are
+                 * garbage ignored by the actual syscall dispatch.
+                 */
+                while (n-- > 0)
+                        args[n] = (u32) regs->gpr[3 + i + n];
+                return;
+        }
+#endif
+        memcpy(args, &regs->gpr[3 + i], n * sizeof(args[0]));
+}
+
+static inline void syscall_set_arguments(struct task_struct *task,
+                                         struct pt_regs *regs,
+                                         unsigned int i, unsigned int n,
+                                         const unsigned long *args)
+{
+        BUG_ON(i + n > 6);
+        memcpy(&regs->gpr[3 + i], args, n * sizeof(args[0]));
+}
+
+#endif  /* _ASM_SYSCALL_H */
diff --git a/include/asm-powerpc/thread_info.h b/include/asm-powerpc/thread_info.h
index a9db562df69a..9665a26a253a 100644
--- a/include/asm-powerpc/thread_info.h
+++ b/include/asm-powerpc/thread_info.h
@@ -108,6 +108,7 @@ static inline struct thread_info *current_thread_info(void)
 #define TIF_SECCOMP             10      /* secure computing */
 #define TIF_RESTOREALL          11      /* Restore all regs (implies NOERROR) */
 #define TIF_NOERROR             12      /* Force successful syscall return */
+#define TIF_NOTIFY_RESUME       13      /* callback before returning to user */
 #define TIF_FREEZE              14      /* Freezing for suspend */
 #define TIF_RUNLATCH            15      /* Is the runlatch enabled? */
 #define TIF_ABI_PENDING         16      /* 32/64 bit switch needed */
@@ -125,12 +126,14 @@ static inline struct thread_info *current_thread_info(void)
 #define _TIF_SECCOMP            (1<<TIF_SECCOMP)
 #define _TIF_RESTOREALL         (1<<TIF_RESTOREALL)
 #define _TIF_NOERROR            (1<<TIF_NOERROR)
+#define _TIF_NOTIFY_RESUME      (1<<TIF_NOTIFY_RESUME)
 #define _TIF_FREEZE             (1<<TIF_FREEZE)
 #define _TIF_RUNLATCH           (1<<TIF_RUNLATCH)
 #define _TIF_ABI_PENDING        (1<<TIF_ABI_PENDING)
 #define _TIF_SYSCALL_T_OR_A     (_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP)
 
-#define _TIF_USER_WORK_MASK     (_TIF_SIGPENDING | _TIF_NEED_RESCHED)
+#define _TIF_USER_WORK_MASK     (_TIF_SIGPENDING | _TIF_NEED_RESCHED | \
+                                 _TIF_NOTIFY_RESUME)
 #define _TIF_PERSYSCALL_MASK    (_TIF_RESTOREALL|_TIF_NOERROR)
 
 /* Bits in local_flags */
diff --git a/include/asm-powerpc/topology.h b/include/asm-powerpc/topology.h
index 100c6fbfc587..c32da6f97999 100644
--- a/include/asm-powerpc/topology.h
+++ b/include/asm-powerpc/topology.h
@@ -108,6 +108,8 @@ static inline void sysfs_remove_device_from_node(struct sys_device *dev,
 #include <asm/smp.h>
 
 #define topology_thread_siblings(cpu)   (per_cpu(cpu_sibling_map, cpu))
+#define topology_core_siblings(cpu)     (per_cpu(cpu_core_map, cpu))
+#define topology_core_id(cpu)           (cpu_to_core_id(cpu))
 #endif
 #endif
 
diff --git a/include/asm-s390/hardirq.h b/include/asm-s390/hardirq.h
index 4b7cb964ff35..89ec7056da28 100644
--- a/include/asm-s390/hardirq.h
+++ b/include/asm-s390/hardirq.h
@@ -34,4 +34,18 @@ typedef struct {
 
 void clock_comparator_work(void);
 
+static inline unsigned long long local_tick_disable(void)
+{
+        unsigned long long old;
+
+        old = S390_lowcore.clock_comparator;
+        S390_lowcore.clock_comparator = -1ULL;
+        return old;
+}
+
+static inline void local_tick_enable(unsigned long long comp)
+{
+        S390_lowcore.clock_comparator = comp;
+}
+
 #endif /* __ASM_HARDIRQ_H */
diff --git a/include/asm-s390/ipl.h b/include/asm-s390/ipl.h
index eaca6dff5405..1171e6d144a3 100644
--- a/include/asm-s390/ipl.h
+++ b/include/asm-s390/ipl.h
@@ -159,7 +159,8 @@ enum diag308_vm_flags {
 };
 
 enum diag308_rc {
-        DIAG308_RC_OK   = 1,
+        DIAG308_RC_OK           = 0x0001,
+        DIAG308_RC_NOCONFIG     = 0x0102,
 };
 
 extern int diag308(unsigned long subcode, void *addr);
diff --git a/include/asm-s390/schid.h b/include/asm-s390/schid.h
index 7bdc0fe15691..825503cf3dc2 100644
--- a/include/asm-s390/schid.h
+++ b/include/asm-s390/schid.h
@@ -11,6 +11,7 @@ struct subchannel_id {
 } __attribute__ ((packed, aligned(4)));
 
 #ifdef __KERNEL__
+#include <linux/string.h>
 
 /* Helper function for sane state of pre-allocated subchannel_id. */
 static inline void
diff --git a/include/asm-s390/setup.h b/include/asm-s390/setup.h
index 4ba14e463e83..2bd9faeb3919 100644
--- a/include/asm-s390/setup.h
+++ b/include/asm-s390/setup.h
@@ -65,7 +65,6 @@ extern unsigned long machine_flags;
 
 #define MACHINE_FLAG_VM         (1UL << 0)
 #define MACHINE_FLAG_IEEE       (1UL << 1)
-#define MACHINE_FLAG_P390       (1UL << 2)
 #define MACHINE_FLAG_CSP        (1UL << 3)
 #define MACHINE_FLAG_MVPG       (1UL << 4)
 #define MACHINE_FLAG_DIAG44     (1UL << 5)
diff --git a/include/asm-s390/unistd.h b/include/asm-s390/unistd.h
index 583da807ea97..c8ad350d1444 100644
--- a/include/asm-s390/unistd.h
+++ b/include/asm-s390/unistd.h
@@ -259,7 +259,13 @@
 #define __NR_timerfd_create     319
 #define __NR_timerfd_settime    320
 #define __NR_timerfd_gettime    321
-#define NR_syscalls 322
+#define __NR_signalfd4          322
+#define __NR_eventfd2           323
+#define __NR_inotify_init1      324
+#define __NR_pipe2              325
+#define __NR_dup3               326
+#define __NR_epoll_create1      327
+#define NR_syscalls 328
 
 /* 
  * There are some system calls that are not present on 64 bit, some
diff --git a/include/asm-sh/.gitignore b/include/asm-sh/.gitignore
deleted file mode 100644
index 9218ef82b698..000000000000
--- a/include/asm-sh/.gitignore
+++ /dev/null
@@ -1,3 +0,0 @@
-cpu
-mach
-machtypes.h
diff --git a/include/asm-sh/adc.h b/include/asm-sh/adc.h
deleted file mode 100644
index 5f85cf74d59d..000000000000
--- a/include/asm-sh/adc.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef __ASM_ADC_H
-#define __ASM_ADC_H
-#ifdef __KERNEL__
-/*
- * Copyright (C) 2004  Andriy Skulysh
- */
-
-#include <asm/cpu/adc.h>
-
-int adc_single(unsigned int channel);
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_ADC_H */
diff --git a/include/asm-sh/addrspace.h b/include/asm-sh/addrspace.h
deleted file mode 100644
index fa544fc38c23..000000000000
--- a/include/asm-sh/addrspace.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1999 by Kaz Kojima
- *
- * Defitions for the address spaces of the SH CPUs.
- */
-#ifndef __ASM_SH_ADDRSPACE_H
-#define __ASM_SH_ADDRSPACE_H
-
-#ifdef __KERNEL__
-
-#include <asm/cpu/addrspace.h>
-
-/* If this CPU supports segmentation, hook up the helpers */
-#ifdef P1SEG
-
-/*
-   [ P0/U0 (virtual) ]          0x00000000     <------ User space
-   [ P1 (fixed)   cached ]      0x80000000     <------ Kernel space
-   [ P2 (fixed)  non-cachable]  0xA0000000     <------ Physical access
-   [ P3 (virtual) cached]       0xC0000000     <------ vmalloced area
-   [ P4 control   ]             0xE0000000
- */
-
-/* Returns the privileged segment base of a given address  */
-#define PXSEG(a)        (((unsigned long)(a)) & 0xe0000000)
-
-/* Returns the physical address of a PnSEG (n=1,2) address   */
-#define PHYSADDR(a)     (((unsigned long)(a)) & 0x1fffffff)
-
-#ifdef CONFIG_29BIT
-/*
- * Map an address to a certain privileged segment
- */
-#define P1SEGADDR(a)    \
-        ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P1SEG))
-#define P2SEGADDR(a)    \
-        ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P2SEG))
-#define P3SEGADDR(a)    \
-        ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P3SEG))
-#define P4SEGADDR(a)    \
-        ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P4SEG))
-#endif /* 29BIT */
-#endif /* P1SEG */
-
-/* Check if an address can be reached in 29 bits */
-#define IS_29BIT(a)     (((unsigned long)(a)) < 0x20000000)
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_SH_ADDRSPACE_H */
diff --git a/include/asm-sh/auxvec.h b/include/asm-sh/auxvec.h
deleted file mode 100644
index a6b9d4f4859e..000000000000
--- a/include/asm-sh/auxvec.h
+++ /dev/null
@@ -1,36 +0,0 @@
-#ifndef __ASM_SH_AUXVEC_H
-#define __ASM_SH_AUXVEC_H
-
-/*
- * Architecture-neutral AT_ values in 0-17, leave some room
- * for more of them.
- */
-
-/*
- * This entry gives some information about the FPU initialization
- * performed by the kernel.
- */
-#define AT_FPUCW                18      /* Used FPU control word.  */
-
-#ifdef CONFIG_VSYSCALL
-/*
- * Only define this in the vsyscall case, the entry point to
- * the vsyscall page gets placed here. The kernel will attempt
- * to build a gate VMA we don't care about otherwise..
- */
-#define AT_SYSINFO_EHDR         33
-#endif
-
-/*
- * More complete cache descriptions than AT_[DIU]CACHEBSIZE.  If the
- * value is -1, then the cache doesn't exist.  Otherwise:
- *
- *    bit 0-3:    Cache set-associativity; 0 means fully associative.
- *    bit 4-7:    Log2 of cacheline size.
- *    bit 8-31:   Size of the entire cache >> 8.
- */
-#define AT_L1I_CACHESHAPE       34
-#define AT_L1D_CACHESHAPE       35
-#define AT_L2_CACHESHAPE        36
-
-#endif /* __ASM_SH_AUXVEC_H */
diff --git a/include/asm-sh/cache.h b/include/asm-sh/cache.h
deleted file mode 100644
index 083419f47c65..000000000000
--- a/include/asm-sh/cache.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/* $Id: cache.h,v 1.6 2004/03/11 18:08:05 lethal Exp $
- *
- * include/asm-sh/cache.h
- *
- * Copyright 1999 (C) Niibe Yutaka
- * Copyright 2002, 2003 (C) Paul Mundt
- */
-#ifndef __ASM_SH_CACHE_H
-#define __ASM_SH_CACHE_H
-#ifdef __KERNEL__
-
-#include <linux/init.h>
-#include <asm/cpu/cache.h>
-
-#define L1_CACHE_BYTES          (1 << L1_CACHE_SHIFT)
-
-#define __read_mostly __attribute__((__section__(".data.read_mostly")))
-
-#ifndef __ASSEMBLY__
-struct cache_info {
-        unsigned int ways;              /* Number of cache ways */
-        unsigned int sets;              /* Number of cache sets */
-        unsigned int linesz;            /* Cache line size (bytes) */
-
-        unsigned int way_size;          /* sets * line size */
-
-        /*
-         * way_incr is the address offset for accessing the next way
-         * in memory mapped cache array ops.
-         */
-        unsigned int way_incr;
-        unsigned int entry_shift;
-        unsigned int entry_mask;
-
-        /*
-         * Compute a mask which selects the address bits which overlap between
-         * 1. those used to select the cache set during indexing
-         * 2. those in the physical page number.
-         */
-        unsigned int alias_mask;
-
-        unsigned int n_aliases;         /* Number of aliases */
-
-        unsigned long flags;
-};
-
-int __init detect_cpu_and_cache_system(void);
-
-#endif /* __ASSEMBLY__ */
-#endif /* __KERNEL__ */
-#endif /* __ASM_SH_CACHE_H */
diff --git a/include/asm-sh/cacheflush.h b/include/asm-sh/cacheflush.h
deleted file mode 100644
index e034c3604111..000000000000
--- a/include/asm-sh/cacheflush.h
+++ /dev/null
@@ -1,81 +0,0 @@
-#ifndef __ASM_SH_CACHEFLUSH_H
-#define __ASM_SH_CACHEFLUSH_H
-
-#ifdef __KERNEL__
-
-#ifdef CONFIG_CACHE_OFF
-/*
- * Nothing to do when the cache is disabled, initial flush and explicit
- * disabling is handled at CPU init time.
- *
- * See arch/sh/kernel/cpu/init.c:cache_init().
- */
-#define p3_cache_init()                         do { } while (0)
-#define flush_cache_all()                       do { } while (0)
-#define flush_cache_mm(mm)                      do { } while (0)
-#define flush_cache_dup_mm(mm)                  do { } while (0)
-#define flush_cache_range(vma, start, end)      do { } while (0)
-#define flush_cache_page(vma, vmaddr, pfn)      do { } while (0)
-#define flush_dcache_page(page)                 do { } while (0)
-#define flush_icache_range(start, end)          do { } while (0)
-#define flush_icache_page(vma,pg)               do { } while (0)
-#define flush_dcache_mmap_lock(mapping)         do { } while (0)
-#define flush_dcache_mmap_unlock(mapping)       do { } while (0)
-#define flush_cache_sigtramp(vaddr)             do { } while (0)
-#define flush_icache_user_range(vma,pg,adr,len) do { } while (0)
-#define __flush_wback_region(start, size)       do { (void)(start); } while (0)
-#define __flush_purge_region(start, size)       do { (void)(start); } while (0)
-#define __flush_invalidate_region(start, size)  do { (void)(start); } while (0)
-#else
-#include <asm/cpu/cacheflush.h>
-
-/*
- * Consistent DMA requires that the __flush_xxx() primitives must be set
- * for any of the enabled non-coherent caches (most of the UP CPUs),
- * regardless of PIPT or VIPT cache configurations.
- */
-
-/* Flush (write-back only) a region (smaller than a page) */
-extern void __flush_wback_region(void *start, int size);
-/* Flush (write-back & invalidate) a region (smaller than a page) */
-extern void __flush_purge_region(void *start, int size);
-/* Flush (invalidate only) a region (smaller than a page) */
-extern void __flush_invalidate_region(void *start, int size);
-#endif
-
-#define ARCH_HAS_FLUSH_KERNEL_DCACHE_PAGE
-static inline void flush_kernel_dcache_page(struct page *page)
-{
-        flush_dcache_page(page);
-}
-
-#if defined(CONFIG_CPU_SH4) && !defined(CONFIG_CACHE_OFF)
-extern void copy_to_user_page(struct vm_area_struct *vma,
-        struct page *page, unsigned long vaddr, void *dst, const void *src,
-        unsigned long len);
-
-extern void copy_from_user_page(struct vm_area_struct *vma,
-        struct page *page, unsigned long vaddr, void *dst, const void *src,
-        unsigned long len);
-#else
-#define copy_to_user_page(vma, page, vaddr, dst, src, len)      \
-        do {                                                    \
-                flush_cache_page(vma, vaddr, page_to_pfn(page));\
-                memcpy(dst, src, len);                          \
-                flush_icache_user_range(vma, page, vaddr, len); \
-        } while (0)
-
-#define copy_from_user_page(vma, page, vaddr, dst, src, len)    \
-        do {                                                    \
-                flush_cache_page(vma, vaddr, page_to_pfn(page));\
-                memcpy(dst, src, len);                          \
-        } while (0)
-#endif
-
-#define flush_cache_vmap(start, end)            flush_cache_all()
-#define flush_cache_vunmap(start, end)          flush_cache_all()
-
-#define HAVE_ARCH_UNMAPPED_AREA
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_SH_CACHEFLUSH_H */
diff --git a/include/asm-sh/clock.h b/include/asm-sh/clock.h
deleted file mode 100644
index b550a27a7042..000000000000
--- a/include/asm-sh/clock.h
+++ /dev/null
@@ -1,82 +0,0 @@
-#ifndef __ASM_SH_CLOCK_H
-#define __ASM_SH_CLOCK_H
-
-#include <linux/kref.h>
-#include <linux/list.h>
-#include <linux/seq_file.h>
-#include <linux/clk.h>
-
-struct clk;
-
-struct clk_ops {
-        void (*init)(struct clk *clk);
-        void (*enable)(struct clk *clk);
-        void (*disable)(struct clk *clk);
-        void (*recalc)(struct clk *clk);
-        int (*set_rate)(struct clk *clk, unsigned long rate, int algo_id);
-        long (*round_rate)(struct clk *clk, unsigned long rate);
-};
-
-struct clk {
-        struct list_head        node;
-        const char              *name;
-        int                     id;
-        struct module           *owner;
-
-        struct clk              *parent;
-        struct clk_ops          *ops;
-
-        struct kref             kref;
-
-        unsigned long           rate;
-        unsigned long           flags;
-};
-
-#define CLK_ALWAYS_ENABLED      (1 << 0)
-#define CLK_RATE_PROPAGATES     (1 << 1)
-
-/* Should be defined by processor-specific code */
-void arch_init_clk_ops(struct clk_ops **, int type);
-
-/* arch/sh/kernel/cpu/clock.c */
-int clk_init(void);
-
-int __clk_enable(struct clk *);
-void __clk_disable(struct clk *);
-
-void clk_recalc_rate(struct clk *);
-
-int clk_register(struct clk *);
-void clk_unregister(struct clk *);
-
-/* the exported API, in addition to clk_set_rate */
-/**
- * clk_set_rate_ex - set the clock rate for a clock source, with additional parameter
- * @clk: clock source
- * @rate: desired clock rate in Hz
- * @algo_id: algorithm id to be passed down to ops->set_rate
- *
- * Returns success (0) or negative errno.
- */
-int clk_set_rate_ex(struct clk *clk, unsigned long rate, int algo_id);
-
-enum clk_sh_algo_id {
-        NO_CHANGE = 0,
-
-        IUS_N1_N1,
-        IUS_322,
-        IUS_522,
-        IUS_N11,
-
-        SB_N1,
-
-        SB3_N1,
-        SB3_32,
-        SB3_43,
-        SB3_54,
-
-        BP_N1,
-
-        IP_N1,
-};
-#endif /* __ASM_SH_CLOCK_H */
diff --git a/include/asm-sh/cpu-sh2/cacheflush.h b/include/asm-sh/cpu-sh2/cacheflush.h
deleted file mode 100644
index 2979efb26de3..000000000000
--- a/include/asm-sh/cpu-sh2/cacheflush.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * include/asm-sh/cpu-sh2/cacheflush.h
- *
- * Copyright (C) 2003 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_CPU_SH2_CACHEFLUSH_H
-#define __ASM_CPU_SH2_CACHEFLUSH_H
-
-/* 
- * Cache flushing:
- *
- *  - flush_cache_all() flushes entire cache
- *  - flush_cache_mm(mm) flushes the specified mm context's cache lines
- *  - flush_cache_dup mm(mm) handles cache flushing when forking
- *  - flush_cache_page(mm, vmaddr, pfn) flushes a single page
- *  - flush_cache_range(vma, start, end) flushes a range of pages
- *
- *  - flush_dcache_page(pg) flushes(wback&invalidates) a page for dcache
- *  - flush_icache_range(start, end) flushes(invalidates) a range for icache
- *  - flush_icache_page(vma, pg) flushes(invalidates) a page for icache
- *
- *  Caches are indexed (effectively) by physical address on SH-2, so
- *  we don't need them.
- */
-#define flush_cache_all()                       do { } while (0)
-#define flush_cache_mm(mm)                      do { } while (0)
-#define flush_cache_dup_mm(mm)                  do { } while (0)
-#define flush_cache_range(vma, start, end)      do { } while (0)
-#define flush_cache_page(vma, vmaddr, pfn)      do { } while (0)
-#define flush_dcache_page(page)                 do { } while (0)
-#define flush_dcache_mmap_lock(mapping)         do { } while (0)
-#define flush_dcache_mmap_unlock(mapping)       do { } while (0)
-#define flush_icache_range(start, end)          do { } while (0)
-#define flush_icache_page(vma,pg)               do { } while (0)
-#define flush_icache_user_range(vma,pg,adr,len) do { } while (0)
-#define flush_cache_sigtramp(vaddr)             do { } while (0)
-
-#define p3_cache_init()                         do { } while (0)
-#endif /* __ASM_CPU_SH2_CACHEFLUSH_H */
-
diff --git a/include/asm-sh/cpu-sh2a/addrspace.h b/include/asm-sh/cpu-sh2a/addrspace.h
deleted file mode 100644
index 795ddd6856a3..000000000000
--- a/include/asm-sh/cpu-sh2a/addrspace.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef __ASM_SH_CPU_SH2A_ADDRSPACE_H
-#define __ASM_SH_CPU_SH2A_ADDRSPACE_H
-
-#define P0SEG           0x00000000
-#define P1SEG           0x00000000
-#define P2SEG           0x20000000
-#define P3SEG           0x00000000
-#define P4SEG           0x80000000
-
-#endif /* __ASM_SH_CPU_SH2A_ADDRSPACE_H */
diff --git a/include/asm-sh/cpu-sh2a/cacheflush.h b/include/asm-sh/cpu-sh2a/cacheflush.h
deleted file mode 100644
index fa3186c73350..000000000000
--- a/include/asm-sh/cpu-sh2a/cacheflush.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm/cpu-sh2/cacheflush.h>
diff --git a/include/asm-sh/cpu-sh2a/dma.h b/include/asm-sh/cpu-sh2a/dma.h
deleted file mode 100644
index 0d5ad85c1de8..000000000000
--- a/include/asm-sh/cpu-sh2a/dma.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm/cpu-sh2/dma.h>
diff --git a/include/asm-sh/cpu-sh2a/mmu_context.h b/include/asm-sh/cpu-sh2a/mmu_context.h
deleted file mode 100644
index cd2387f7db9e..000000000000
--- a/include/asm-sh/cpu-sh2a/mmu_context.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm/cpu-sh2/mmu_context.h>
diff --git a/include/asm-sh/cpu-sh2a/timer.h b/include/asm-sh/cpu-sh2a/timer.h
deleted file mode 100644
index fee504adf11e..000000000000
--- a/include/asm-sh/cpu-sh2a/timer.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm/cpu-sh2/timer.h>
diff --git a/include/asm-sh/cpu-sh2a/ubc.h b/include/asm-sh/cpu-sh2a/ubc.h
deleted file mode 100644
index cf28062b96a2..000000000000
--- a/include/asm-sh/cpu-sh2a/ubc.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm/cpu-sh2/ubc.h>
diff --git a/include/asm-sh/cpu-sh2a/watchdog.h b/include/asm-sh/cpu-sh2a/watchdog.h
deleted file mode 100644
index c1b3e2488478..000000000000
--- a/include/asm-sh/cpu-sh2a/watchdog.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm/cpu-sh2/watchdog.h>
diff --git a/include/asm-sh/cpu-sh3/addrspace.h b/include/asm-sh/cpu-sh3/addrspace.h
deleted file mode 100644
index 0f94726c7d62..000000000000
--- a/include/asm-sh/cpu-sh3/addrspace.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1999 by Kaz Kojima
- *
- * Defitions for the address spaces of the SH-3 CPUs.
- */
-#ifndef __ASM_CPU_SH3_ADDRSPACE_H
-#define __ASM_CPU_SH3_ADDRSPACE_H
-
-#define P0SEG           0x00000000
-#define P1SEG           0x80000000
-#define P2SEG           0xa0000000
-#define P3SEG           0xc0000000
-#define P4SEG           0xe0000000
-
-#endif /* __ASM_CPU_SH3_ADDRSPACE_H */
diff --git a/include/asm-sh/cpu-sh3/cacheflush.h b/include/asm-sh/cpu-sh3/cacheflush.h
deleted file mode 100644
index f70d8ef76a15..000000000000
--- a/include/asm-sh/cpu-sh3/cacheflush.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * include/asm-sh/cpu-sh3/cacheflush.h
- *
- * Copyright (C) 1999 Niibe Yutaka
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_CPU_SH3_CACHEFLUSH_H
-#define __ASM_CPU_SH3_CACHEFLUSH_H
-
-/*
- * Cache flushing:
- *
- *  - flush_cache_all() flushes entire cache
- *  - flush_cache_mm(mm) flushes the specified mm context's cache lines
- *  - flush_cache_dup mm(mm) handles cache flushing when forking
- *  - flush_cache_page(mm, vmaddr, pfn) flushes a single page
- *  - flush_cache_range(vma, start, end) flushes a range of pages
- *
- *  - flush_dcache_page(pg) flushes(wback&invalidates) a page for dcache
- *  - flush_icache_range(start, end) flushes(invalidates) a range for icache
- *  - flush_icache_page(vma, pg) flushes(invalidates) a page for icache
- *
- *  Caches are indexed (effectively) by physical address on SH-3, so
- *  we don't need them.
- */
-
-#if defined(CONFIG_SH7705_CACHE_32KB)
-
-/* SH7705 is an SH3 processor with 32KB cache. This has alias issues like the
- * SH4. Unlike the SH4 this is a unified cache so we need to do some work
- * in mmap when 'exec'ing a new binary
- */
- /* 32KB cache, 4kb PAGE sizes need to check bit 12 */
-#define CACHE_ALIAS 0x00001000
-
-#define PG_mapped       PG_arch_1
-
-void flush_cache_all(void);
-void flush_cache_mm(struct mm_struct *mm);
-#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
-void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
-                              unsigned long end);
-void flush_cache_page(struct vm_area_struct *vma, unsigned long addr, unsigned long pfn);
-void flush_dcache_page(struct page *pg);
-void flush_icache_range(unsigned long start, unsigned long end);
-void flush_icache_page(struct vm_area_struct *vma, struct page *page);
-#else
-#define flush_cache_all()                       do { } while (0)
-#define flush_cache_mm(mm)                      do { } while (0)
-#define flush_cache_dup_mm(mm)                  do { } while (0)
-#define flush_cache_range(vma, start, end)      do { } while (0)
-#define flush_cache_page(vma, vmaddr, pfn)      do { } while (0)
-#define flush_dcache_page(page)                 do { } while (0)
-#define flush_icache_range(start, end)          do { } while (0)
-#define flush_icache_page(vma,pg)               do { } while (0)
-#endif
-
-#define flush_dcache_mmap_lock(mapping)         do { } while (0)
-#define flush_dcache_mmap_unlock(mapping)       do { } while (0)
-
-/* SH3 has unified cache so no special action needed here */
-#define flush_cache_sigtramp(vaddr)             do { } while (0)
-#define flush_icache_user_range(vma,pg,adr,len) do { } while (0)
-
-#define p3_cache_init()                         do { } while (0)
-
-#endif /* __ASM_CPU_SH3_CACHEFLUSH_H */
diff --git a/include/asm-sh/cpu-sh3/rtc.h b/include/asm-sh/cpu-sh3/rtc.h
deleted file mode 100644
index 319404aaee37..000000000000
--- a/include/asm-sh/cpu-sh3/rtc.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef __ASM_SH_CPU_SH3_RTC_H
-#define __ASM_SH_CPU_SH3_RTC_H
-
-#define rtc_reg_size            sizeof(u16)
-#define RTC_BIT_INVERTED        0       /* No bug on SH7708, SH7709A */
-#define RTC_DEF_CAPABILITIES    0UL
-
-#endif /* __ASM_SH_CPU_SH3_RTC_H */
diff --git a/include/asm-sh/cpu-sh3/sigcontext.h b/include/asm-sh/cpu-sh3/sigcontext.h
deleted file mode 100644
index 17310dc03dcd..000000000000
--- a/include/asm-sh/cpu-sh3/sigcontext.h
+++ /dev/null
@@ -1,17 +0,0 @@
-#ifndef __ASM_CPU_SH3_SIGCONTEXT_H
-#define __ASM_CPU_SH3_SIGCONTEXT_H
-
-struct sigcontext {
-        unsigned long   oldmask;
-
-        /* CPU registers */
-        unsigned long sc_regs[16];
-        unsigned long sc_pc;
-        unsigned long sc_pr;
-        unsigned long sc_sr;
-        unsigned long sc_gbr;
-        unsigned long sc_mach;
-        unsigned long sc_macl;
-};
-
-#endif /* __ASM_CPU_SH3_SIGCONTEXT_H */
diff --git a/include/asm-sh/cpu-sh4/cacheflush.h b/include/asm-sh/cpu-sh4/cacheflush.h
deleted file mode 100644
index 5fd5c89ef86a..000000000000
--- a/include/asm-sh/cpu-sh4/cacheflush.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * include/asm-sh/cpu-sh4/cacheflush.h
- *
- * Copyright (C) 1999 Niibe Yutaka
- * Copyright (C) 2003 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_CPU_SH4_CACHEFLUSH_H
-#define __ASM_CPU_SH4_CACHEFLUSH_H
-
-/*
- *  Caches are broken on SH-4 (unless we use write-through
- *  caching; in which case they're only semi-broken),
- *  so we need them.
- */
-void flush_cache_all(void);
-void flush_dcache_all(void);
-void flush_cache_mm(struct mm_struct *mm);
-#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
-void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
-                       unsigned long end);
-void flush_cache_page(struct vm_area_struct *vma, unsigned long addr,
-                      unsigned long pfn);
-void flush_dcache_page(struct page *pg);
-
-#define flush_dcache_mmap_lock(mapping)         do { } while (0)
-#define flush_dcache_mmap_unlock(mapping)       do { } while (0)
-
-void flush_icache_range(unsigned long start, unsigned long end);
-void flush_cache_sigtramp(unsigned long addr);
-void flush_icache_user_range(struct vm_area_struct *vma, struct page *page,
-                             unsigned long addr, int len);
-
-#define flush_icache_page(vma,pg)               do { } while (0)
-
-/* Initialization of P3 area for copy_user_page */
-void p3_cache_init(void);
-
-#define PG_mapped       PG_arch_1
-
-#endif /* __ASM_CPU_SH4_CACHEFLUSH_H */
diff --git a/include/asm-sh/cpu-sh4/dma.h b/include/asm-sh/cpu-sh4/dma.h
deleted file mode 100644
index aaf71b018c28..000000000000
--- a/include/asm-sh/cpu-sh4/dma.h
+++ /dev/null
@@ -1,65 +0,0 @@
-#ifndef __ASM_CPU_SH4_DMA_H
-#define __ASM_CPU_SH4_DMA_H
-
-#define DMAOR_INIT      ( 0x8000 | DMAOR_DME )
-
-/* SH7751/7760/7780 DMA IRQ sources */
-#define DMTE0_IRQ       34
-#define DMTE1_IRQ       35
-#define DMTE2_IRQ       36
-#define DMTE3_IRQ       37
-#define DMTE4_IRQ       44
-#define DMTE5_IRQ       45
-#define DMTE6_IRQ       46
-#define DMTE7_IRQ       47
-#define DMAE_IRQ        38
-
-#ifdef CONFIG_CPU_SH4A
-#define SH_DMAC_BASE    0xfc808020
-
-#define CHCR_TS_MASK    0x18
-#define CHCR_TS_SHIFT   3
-
-#include <asm/cpu/dma-sh7780.h>
-#else
-#define SH_DMAC_BASE    0xffa00000
-
-/* Definitions for the SuperH DMAC */
-#define TM_BURST        0x0000080
-#define TS_8            0x00000010
-#define TS_16           0x00000020
-#define TS_32           0x00000030
-#define TS_64           0x00000000
-
-#define CHCR_TS_MASK    0x70
-#define CHCR_TS_SHIFT   4
-
-#define DMAOR_COD       0x00000008
-
-/*
- * The SuperH DMAC supports a number of transmit sizes, we list them here,
- * with their respective values as they appear in the CHCR registers.
- *
- * Defaults to a 64-bit transfer size.
- */
-enum {
-        XMIT_SZ_64BIT,
-        XMIT_SZ_8BIT,
-        XMIT_SZ_16BIT,
-        XMIT_SZ_32BIT,
-        XMIT_SZ_256BIT,
-};
-
-/*
- * The DMA count is defined as the number of bytes to transfer.
- */
-static unsigned int ts_shift[] __maybe_unused = {
-        [XMIT_SZ_64BIT]         = 3,
-        [XMIT_SZ_8BIT]          = 0,
-        [XMIT_SZ_16BIT]         = 1,
-        [XMIT_SZ_32BIT]         = 2,
-        [XMIT_SZ_256BIT]        = 5,
-};
-#endif
-
-#endif /* __ASM_CPU_SH4_DMA_H */
diff --git a/include/asm-sh/cpu-sh4/freq.h b/include/asm-sh/cpu-sh4/freq.h
deleted file mode 100644
index da46e67ae26d..000000000000
--- a/include/asm-sh/cpu-sh4/freq.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * include/asm-sh/cpu-sh4/freq.h
- *
- * Copyright (C) 2002, 2003 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_CPU_SH4_FREQ_H
-#define __ASM_CPU_SH4_FREQ_H
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7722) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7723) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7366)
-#define FRQCR                   0xa4150000
-#define VCLKCR                  0xa4150004
-#define SCLKACR                 0xa4150008
-#define SCLKBCR                 0xa415000c
-#define IrDACLKCR               0xa4150010
-#elif defined(CONFIG_CPU_SUBTYPE_SH7763) || \
-      defined(CONFIG_CPU_SUBTYPE_SH7780)
-#define FRQCR                   0xffc80000
-#elif defined(CONFIG_CPU_SUBTYPE_SH7785)
-#define FRQCR0                  0xffc80000
-#define FRQCR1                  0xffc80004
-#define FRQMR1                  0xffc80014
-#elif defined(CONFIG_CPU_SUBTYPE_SHX3)
-#define FRQCR                   0xffc00014
-#else
-#define FRQCR                   0xffc00000
-#define FRQCR_PSTBY             0x0200
-#define FRQCR_PLLEN             0x0400
-#define FRQCR_CKOEN             0x0800
-#endif
-#define MIN_DIVISOR_NR          0
-#define MAX_DIVISOR_NR          3
-
-#endif /* __ASM_CPU_SH4_FREQ_H */
-
diff --git a/include/asm-sh/cpu-sh5/timer.h b/include/asm-sh/cpu-sh5/timer.h
deleted file mode 100644
index 88da9b341a36..000000000000
--- a/include/asm-sh/cpu-sh5/timer.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef __ASM_SH_CPU_SH5_TIMER_H
-#define __ASM_SH_CPU_SH5_TIMER_H
-
-#endif /* __ASM_SH_CPU_SH5_TIMER_H */
diff --git a/include/asm-sh/device.h b/include/asm-sh/device.h
deleted file mode 100644
index d8f9872b0e2d..000000000000
--- a/include/asm-sh/device.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/*
- * Arch specific extensions to struct device
- *
- * This file is released under the GPLv2
- */
-#include <asm-generic/device.h>
-
diff --git a/include/asm-sh/dma-mapping.h b/include/asm-sh/dma-mapping.h
deleted file mode 100644
index 6c0b8a2de143..000000000000
--- a/include/asm-sh/dma-mapping.h
+++ /dev/null
@@ -1,192 +0,0 @@
-#ifndef __ASM_SH_DMA_MAPPING_H
-#define __ASM_SH_DMA_MAPPING_H
-
-#include <linux/mm.h>
-#include <linux/scatterlist.h>
-#include <asm/cacheflush.h>
-#include <asm/io.h>
-
-extern struct bus_type pci_bus_type;
-
-#define dma_supported(dev, mask)        (1)
-
-static inline int dma_set_mask(struct device *dev, u64 mask)
-{
-        if (!dev->dma_mask || !dma_supported(dev, mask))
-                return -EIO;
-
-        *dev->dma_mask = mask;
-
-        return 0;
-}
-
-void *dma_alloc_coherent(struct device *dev, size_t size,
-                         dma_addr_t *dma_handle, gfp_t flag);
-
-void dma_free_coherent(struct device *dev, size_t size,
-                       void *vaddr, dma_addr_t dma_handle);
-
-void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
-                    enum dma_data_direction dir);
-
-#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
-#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
-#define dma_is_consistent(d, h) (1)
-
-static inline dma_addr_t dma_map_single(struct device *dev,
-                                        void *ptr, size_t size,
-                                        enum dma_data_direction dir)
-{
-#if defined(CONFIG_PCI) && !defined(CONFIG_SH_PCIDMA_NONCOHERENT)
-        if (dev->bus == &pci_bus_type)
-                return virt_to_phys(ptr);
-#endif
-        dma_cache_sync(dev, ptr, size, dir);
-
-        return virt_to_phys(ptr);
-}
-
-#define dma_unmap_single(dev, addr, size, dir)  do { } while (0)
-
-static inline int dma_map_sg(struct device *dev, struct scatterlist *sg,
-                             int nents, enum dma_data_direction dir)
-{
-        int i;
-
-        for (i = 0; i < nents; i++) {
-#if !defined(CONFIG_PCI) || defined(CONFIG_SH_PCIDMA_NONCOHERENT)
-                dma_cache_sync(dev, sg_virt(&sg[i]), sg[i].length, dir);
-#endif
-                sg[i].dma_address = sg_phys(&sg[i]);
-        }
-
-        return nents;
-}
-
-#define dma_unmap_sg(dev, sg, nents, dir)       do { } while (0)
-
-static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
-                                      unsigned long offset, size_t size,
-                                      enum dma_data_direction dir)
-{
-        return dma_map_single(dev, page_address(page) + offset, size, dir);
-}
-
-static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
-                                  size_t size, enum dma_data_direction dir)
-{
-        dma_unmap_single(dev, dma_address, size, dir);
-}
-
-static inline void dma_sync_single(struct device *dev, dma_addr_t dma_handle,
-                                   size_t size, enum dma_data_direction dir)
-{
-#if defined(CONFIG_PCI) && !defined(CONFIG_SH_PCIDMA_NONCOHERENT)
-        if (dev->bus == &pci_bus_type)
-                return;
-#endif
-        dma_cache_sync(dev, phys_to_virt(dma_handle), size, dir);
-}
-
-static inline void dma_sync_single_range(struct device *dev,
-                                         dma_addr_t dma_handle,
-                                         unsigned long offset, size_t size,
-                                         enum dma_data_direction dir)
-{
-#if defined(CONFIG_PCI) && !defined(CONFIG_SH_PCIDMA_NONCOHERENT)
-        if (dev->bus == &pci_bus_type)
-                return;
-#endif
-        dma_cache_sync(dev, phys_to_virt(dma_handle) + offset, size, dir);
-}
-
-static inline void dma_sync_sg(struct device *dev, struct scatterlist *sg,
-                               int nelems, enum dma_data_direction dir)
-{
-        int i;
-
-        for (i = 0; i < nelems; i++) {
-#if !defined(CONFIG_PCI) || defined(CONFIG_SH_PCIDMA_NONCOHERENT)
-                dma_cache_sync(dev, sg_virt(&sg[i]), sg[i].length, dir);
-#endif
-                sg[i].dma_address = sg_phys(&sg[i]);
-        }
-}
-
-static inline void dma_sync_single_for_cpu(struct device *dev,
-                                           dma_addr_t dma_handle, size_t size,
-                                           enum dma_data_direction dir)
-{
-        dma_sync_single(dev, dma_handle, size, dir);
-}
-
-static inline void dma_sync_single_for_device(struct device *dev,
-                                              dma_addr_t dma_handle,
-                                              size_t size,
-                                              enum dma_data_direction dir)
-{
-        dma_sync_single(dev, dma_handle, size, dir);
-}
-
-static inline void dma_sync_single_range_for_cpu(struct device *dev,
-                                                 dma_addr_t dma_handle,
-                                                 unsigned long offset,
-                                                 size_t size,
-                                                 enum dma_data_direction direction)
-{
-        dma_sync_single_for_cpu(dev, dma_handle+offset, size, direction);
-}
-
-static inline void dma_sync_single_range_for_device(struct device *dev,
-                                                    dma_addr_t dma_handle,
-                                                    unsigned long offset,
-                                                    size_t size,
-                                                    enum dma_data_direction direction)
-{
-        dma_sync_single_for_device(dev, dma_handle+offset, size, direction);
-}
-
-
-static inline void dma_sync_sg_for_cpu(struct device *dev,
-                                       struct scatterlist *sg, int nelems,
-                                       enum dma_data_direction dir)
-{
-        dma_sync_sg(dev, sg, nelems, dir);
-}
-
-static inline void dma_sync_sg_for_device(struct device *dev,
-                                          struct scatterlist *sg, int nelems,
-                                          enum dma_data_direction dir)
-{
-        dma_sync_sg(dev, sg, nelems, dir);
-}
-
-
-static inline int dma_get_cache_alignment(void)
-{
-        /*
-         * Each processor family will define its own L1_CACHE_SHIFT,
-         * L1_CACHE_BYTES wraps to this, so this is always safe.
-         */
-        return L1_CACHE_BYTES;
-}
-
-static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
-{
-        return dma_addr == 0;
-}
-
-#define ARCH_HAS_DMA_DECLARE_COHERENT_MEMORY
-
-extern int
-dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr,
-                            dma_addr_t device_addr, size_t size, int flags);
-
-extern void
-dma_release_declared_memory(struct device *dev);
-
-extern void *
-dma_mark_declared_memory_occupied(struct device *dev,
-                                  dma_addr_t device_addr, size_t size);
-
-#endif /* __ASM_SH_DMA_MAPPING_H */
diff --git a/include/asm-sh/dma.h b/include/asm-sh/dma.h
deleted file mode 100644
index a65b02fd186e..000000000000
--- a/include/asm-sh/dma.h
+++ /dev/null
@@ -1,166 +0,0 @@
-/*
- * include/asm-sh/dma.h
- *
- * Copyright (C) 2003, 2004  Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_SH_DMA_H
-#define __ASM_SH_DMA_H
-#ifdef __KERNEL__
-
-#include <linux/spinlock.h>
-#include <linux/wait.h>
-#include <linux/sched.h>
-#include <linux/sysdev.h>
-#include <asm/cpu/dma.h>
-
-/* The maximum address that we can perform a DMA transfer to on this platform */
-/* Don't define MAX_DMA_ADDRESS; it's useless on the SuperH and any
-   occurrence should be flagged as an error.  */
-/* But... */
-/* XXX: This is not applicable to SuperH, just needed for alloc_bootmem */
-#define MAX_DMA_ADDRESS         (PAGE_OFFSET+0x10000000)
-
-#ifdef CONFIG_NR_DMA_CHANNELS
-#  define MAX_DMA_CHANNELS      (CONFIG_NR_DMA_CHANNELS)
-#else
-#  define MAX_DMA_CHANNELS      (CONFIG_NR_ONCHIP_DMA_CHANNELS)
-#endif
-
-/*
- * Read and write modes can mean drastically different things depending on the
- * channel configuration. Consult your DMAC documentation and module
- * implementation for further clues.
- */
-#define DMA_MODE_READ           0x00
-#define DMA_MODE_WRITE          0x01
-#define DMA_MODE_MASK           0x01
-
-#define DMA_AUTOINIT            0x10
-
-/*
- * DMAC (dma_info) flags
- */
-enum {
-        DMAC_CHANNELS_CONFIGURED        = 0x01,
-        DMAC_CHANNELS_TEI_CAPABLE       = 0x02, /* Transfer end interrupt */
-};
-
-/*
- * DMA channel capabilities / flags
- */
-enum {
-        DMA_CONFIGURED                  = 0x01,
-
-        /*
-         * Transfer end interrupt, inherited from DMAC.
-         * wait_queue used in dma_wait_for_completion.
-         */
-        DMA_TEI_CAPABLE                 = 0x02,
-};
-
-extern spinlock_t dma_spin_lock;
-
-struct dma_channel;
-
-struct dma_ops {
-        int (*request)(struct dma_channel *chan);
-        void (*free)(struct dma_channel *chan);
-
-        int (*get_residue)(struct dma_channel *chan);
-        int (*xfer)(struct dma_channel *chan);
-        int (*configure)(struct dma_channel *chan, unsigned long flags);
-        int (*extend)(struct dma_channel *chan, unsigned long op, void *param);
-};
-
-struct dma_channel {
-        char dev_id[16];                /* unique name per DMAC of channel */
-
-        unsigned int chan;              /* DMAC channel number */
-        unsigned int vchan;             /* Virtual channel number */
-
-        unsigned int mode;
-        unsigned int count;
-
-        unsigned long sar;
-        unsigned long dar;
-
-        const char **caps;
-
-        unsigned long flags;
-        atomic_t busy;
-
-        wait_queue_head_t wait_queue;
-
-        struct sys_device dev;
-        void *priv_data;
-};
-
-struct dma_info {
-        struct platform_device *pdev;
-
-        const char *name;
-        unsigned int nr_channels;
-        unsigned long flags;
-
-        struct dma_ops *ops;
-        struct dma_channel *channels;
-
-        struct list_head list;
-        int first_channel_nr;
-        int first_vchannel_nr;
-};
-
-struct dma_chan_caps {
-        int ch_num;
-        const char **caplist;
-};
-
-#define to_dma_channel(channel) container_of(channel, struct dma_channel, dev)
-
-/* arch/sh/drivers/dma/dma-api.c */
-extern int dma_xfer(unsigned int chan, unsigned long from,
-                    unsigned long to, size_t size, unsigned int mode);
-
-#define dma_write(chan, from, to, size) \
-        dma_xfer(chan, from, to, size, DMA_MODE_WRITE)
-#define dma_write_page(chan, from, to)  \
-        dma_write(chan, from, to, PAGE_SIZE)
-
-#define dma_read(chan, from, to, size)  \
-        dma_xfer(chan, from, to, size, DMA_MODE_READ)
-#define dma_read_page(chan, from, to)   \
-        dma_read(chan, from, to, PAGE_SIZE)
-
-extern int request_dma_bycap(const char **dmac, const char **caps,
-                             const char *dev_id);
-extern int request_dma(unsigned int chan, const char *dev_id);
-extern void free_dma(unsigned int chan);
-extern int get_dma_residue(unsigned int chan);
-extern struct dma_info *get_dma_info(unsigned int chan);
-extern struct dma_channel *get_dma_channel(unsigned int chan);
-extern void dma_wait_for_completion(unsigned int chan);
-extern void dma_configure_channel(unsigned int chan, unsigned long flags);
-
-extern int register_dmac(struct dma_info *info);
-extern void unregister_dmac(struct dma_info *info);
-extern struct dma_info *get_dma_info_by_name(const char *dmac_name);
-
-extern int dma_extend(unsigned int chan, unsigned long op, void *param);
-extern int register_chan_caps(const char *dmac, struct dma_chan_caps *capslist);
-
-/* arch/sh/drivers/dma/dma-sysfs.c */
-extern int dma_create_sysfs_files(struct dma_channel *, struct dma_info *);
-extern void dma_remove_sysfs_files(struct dma_channel *, struct dma_info *);
-
-#ifdef CONFIG_PCI
-extern int isa_dma_bridge_buggy;
-#else
-#define isa_dma_bridge_buggy    (0)
-#endif
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_SH_DMA_H */
diff --git a/include/asm-sh/dreamcast/pci.h b/include/asm-sh/dreamcast/pci.h
deleted file mode 100644
index e401b24b0d8e..000000000000
--- a/include/asm-sh/dreamcast/pci.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * include/asm-sh/dreamcast/pci.h
- *
- * Copyright (C) 2001, 2002  M. R. Brown
- * Copyright (C) 2002, 2003  Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_SH_DREAMCAST_PCI_H
-#define __ASM_SH_DREAMCAST_PCI_H
-
-#include <asm/mach/sysasic.h>
-
-#define GAPSPCI_REGS            0x01001400
-#define GAPSPCI_DMA_BASE        0x01840000
-#define GAPSPCI_DMA_SIZE        32768
-#define GAPSPCI_BBA_CONFIG      0x01001600
-#define GAPSPCI_BBA_CONFIG_SIZE 0x2000
-
-#define GAPSPCI_IRQ             HW_EVENT_EXTERNAL
-
-#endif /* __ASM_SH_DREAMCAST_PCI_H */
-
diff --git a/include/asm-sh/elf.h b/include/asm-sh/elf.h
deleted file mode 100644
index 05092da1aa59..000000000000
--- a/include/asm-sh/elf.h
+++ /dev/null
@@ -1,193 +0,0 @@
-#ifndef __ASM_SH_ELF_H
-#define __ASM_SH_ELF_H
-
-#include <asm/auxvec.h>
-#include <asm/ptrace.h>
-#include <asm/user.h>
-
-/* SH (particularly SHcompact) relocation types  */
-#define R_SH_NONE               0
-#define R_SH_DIR32              1
-#define R_SH_REL32              2
-#define R_SH_DIR8WPN            3
-#define R_SH_IND12W             4
-#define R_SH_DIR8WPL            5
-#define R_SH_DIR8WPZ            6
-#define R_SH_DIR8BP             7
-#define R_SH_DIR8W              8
-#define R_SH_DIR8L              9
-#define R_SH_SWITCH16           25
-#define R_SH_SWITCH32           26
-#define R_SH_USES               27
-#define R_SH_COUNT              28
-#define R_SH_ALIGN              29
-#define R_SH_CODE               30
-#define R_SH_DATA               31
-#define R_SH_LABEL              32
-#define R_SH_SWITCH8            33
-#define R_SH_GNU_VTINHERIT      34
-#define R_SH_GNU_VTENTRY        35
-#define R_SH_TLS_GD_32          144
-#define R_SH_TLS_LD_32          145
-#define R_SH_TLS_LDO_32         146
-#define R_SH_TLS_IE_32          147
-#define R_SH_TLS_LE_32          148
-#define R_SH_TLS_DTPMOD32       149
-#define R_SH_TLS_DTPOFF32       150
-#define R_SH_TLS_TPOFF32        151
-#define R_SH_GOT32              160
-#define R_SH_PLT32              161
-#define R_SH_COPY               162
-#define R_SH_GLOB_DAT           163
-#define R_SH_JMP_SLOT           164
-#define R_SH_RELATIVE           165
-#define R_SH_GOTOFF             166
-#define R_SH_GOTPC              167
-/* SHmedia relocs */
-#define R_SH_IMM_LOW16          246
-#define R_SH_IMM_LOW16_PCREL    247
-#define R_SH_IMM_MEDLOW16       248
-#define R_SH_IMM_MEDLOW16_PCREL 249
-/* Keep this the last entry.  */
-#define R_SH_NUM                256
-
-/*
- * ELF register definitions..
- */
-
-typedef unsigned long elf_greg_t;
-
-#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t))
-typedef elf_greg_t elf_gregset_t[ELF_NGREG];
-
-typedef struct user_fpu_struct elf_fpregset_t;
-
-/*
- * These are used to set parameters in the core dumps.
- */
-#define ELF_CLASS       ELFCLASS32
-#ifdef __LITTLE_ENDIAN__
-#define ELF_DATA        ELFDATA2LSB
-#else
-#define ELF_DATA        ELFDATA2MSB
-#endif
-#define ELF_ARCH        EM_SH
-
-#ifdef __KERNEL__
-/*
- * This is used to ensure we don't load something for the wrong architecture.
- */
-#define elf_check_arch(x) ( (x)->e_machine == EM_SH )
-
-#define USE_ELF_CORE_DUMP
-#define ELF_EXEC_PAGESIZE       PAGE_SIZE
-
-/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
-   use of this is to invoke "./ld.so someprog" to test out a new version of
-   the loader.  We need to make sure that it is out of the way of the program
-   that it will "exec", and that there is sufficient room for the brk.  */
-
-#define ELF_ET_DYN_BASE         (2 * TASK_SIZE / 3)
-
-#define ELF_CORE_COPY_REGS(_dest,_regs)                         \
-        memcpy((char *) &_dest, (char *) _regs,                 \
-               sizeof(struct pt_regs));
-
-/* This yields a mask that user programs can use to figure out what
-   instruction set this CPU supports.  This could be done in user space,
-   but it's not easy, and we've already done it here.  */
-
-#define ELF_HWCAP       (boot_cpu_data.flags)
-
-/* This yields a string that ld.so will use to load implementation
-   specific libraries for optimization.  This is more specific in
-   intent than poking at uname or /proc/cpuinfo.
-
-   For the moment, we have only optimizations for the Intel generations,
-   but that could change... */
-
-#define ELF_PLATFORM    (utsname()->machine)
-
-#ifdef __SH5__
-#define ELF_PLAT_INIT(_r, load_addr) \
-  do { _r->regs[0]=0; _r->regs[1]=0; _r->regs[2]=0; _r->regs[3]=0; \
-       _r->regs[4]=0; _r->regs[5]=0; _r->regs[6]=0; _r->regs[7]=0; \
-       _r->regs[8]=0; _r->regs[9]=0; _r->regs[10]=0; _r->regs[11]=0; \
-       _r->regs[12]=0; _r->regs[13]=0; _r->regs[14]=0; _r->regs[15]=0; \
-       _r->regs[16]=0; _r->regs[17]=0; _r->regs[18]=0; _r->regs[19]=0; \
-       _r->regs[20]=0; _r->regs[21]=0; _r->regs[22]=0; _r->regs[23]=0; \
-       _r->regs[24]=0; _r->regs[25]=0; _r->regs[26]=0; _r->regs[27]=0; \
-       _r->regs[28]=0; _r->regs[29]=0; _r->regs[30]=0; _r->regs[31]=0; \
-       _r->regs[32]=0; _r->regs[33]=0; _r->regs[34]=0; _r->regs[35]=0; \
-       _r->regs[36]=0; _r->regs[37]=0; _r->regs[38]=0; _r->regs[39]=0; \
-       _r->regs[40]=0; _r->regs[41]=0; _r->regs[42]=0; _r->regs[43]=0; \
-       _r->regs[44]=0; _r->regs[45]=0; _r->regs[46]=0; _r->regs[47]=0; \
-       _r->regs[48]=0; _r->regs[49]=0; _r->regs[50]=0; _r->regs[51]=0; \
-       _r->regs[52]=0; _r->regs[53]=0; _r->regs[54]=0; _r->regs[55]=0; \
-       _r->regs[56]=0; _r->regs[57]=0; _r->regs[58]=0; _r->regs[59]=0; \
-       _r->regs[60]=0; _r->regs[61]=0; _r->regs[62]=0; \
-       _r->tregs[0]=0; _r->tregs[1]=0; _r->tregs[2]=0; _r->tregs[3]=0; \
-       _r->tregs[4]=0; _r->tregs[5]=0; _r->tregs[6]=0; _r->tregs[7]=0; \
-       _r->sr = SR_FD | SR_MMU; } while (0)
-#else
-#define ELF_PLAT_INIT(_r, load_addr) \
-  do { _r->regs[0]=0; _r->regs[1]=0; _r->regs[2]=0; _r->regs[3]=0; \
-       _r->regs[4]=0; _r->regs[5]=0; _r->regs[6]=0; _r->regs[7]=0; \
-       _r->regs[8]=0; _r->regs[9]=0; _r->regs[10]=0; _r->regs[11]=0; \
-       _r->regs[12]=0; _r->regs[13]=0; _r->regs[14]=0; \
-       _r->sr = SR_FD; } while (0)
-#endif
-
-#define SET_PERSONALITY(ex, ibcs2) set_personality(PER_LINUX_32BIT)
-struct task_struct;
-extern int dump_task_regs (struct task_struct *, elf_gregset_t *);
-extern int dump_task_fpu (struct task_struct *, elf_fpregset_t *);
-
-#define ELF_CORE_COPY_TASK_REGS(tsk, elf_regs) dump_task_regs(tsk, elf_regs)
-#define ELF_CORE_COPY_FPREGS(tsk, elf_fpregs) dump_task_fpu(tsk, elf_fpregs)
-
-#ifdef CONFIG_VSYSCALL
-/* vDSO has arch_setup_additional_pages */
-#define ARCH_HAS_SETUP_ADDITIONAL_PAGES
-struct linux_binprm;
-extern int arch_setup_additional_pages(struct linux_binprm *bprm,
-                                       int executable_stack);
-
-extern unsigned int vdso_enabled;
-extern void __kernel_vsyscall;
-
-#define VDSO_BASE               ((unsigned long)current->mm->context.vdso)
-#define VDSO_SYM(x)             (VDSO_BASE + (unsigned long)(x))
-
-#define VSYSCALL_AUX_ENT                                        \
-        if (vdso_enabled)                                       \
-                NEW_AUX_ENT(AT_SYSINFO_EHDR, VDSO_BASE);
-#else
-#define VSYSCALL_AUX_ENT
-#endif /* CONFIG_VSYSCALL */
-
-#ifdef CONFIG_SH_FPU
-#define FPU_AUX_ENT     NEW_AUX_ENT(AT_FPUCW, FPSCR_INIT)
-#else
-#define FPU_AUX_ENT
-#endif
-
-extern int l1i_cache_shape, l1d_cache_shape, l2_cache_shape;
-
-/* update AT_VECTOR_SIZE_ARCH if the number of NEW_AUX_ENT entries changes */
-#define ARCH_DLINFO                                             \
-do {                                                            \
-        /* Optional FPU initialization */                       \
-        FPU_AUX_ENT;                                            \
-                                                                \
-        /* Optional vsyscall entry */                           \
-        VSYSCALL_AUX_ENT;                                       \
-                                                                \
-        /* Cache desc */                                        \
-        NEW_AUX_ENT(AT_L1I_CACHESHAPE, l1i_cache_shape);        \
-        NEW_AUX_ENT(AT_L1D_CACHESHAPE, l1d_cache_shape);        \
-        NEW_AUX_ENT(AT_L2_CACHESHAPE, l2_cache_shape);          \
-} while (0)
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_SH_ELF_H */
diff --git a/include/asm-sh/freq.h b/include/asm-sh/freq.h
deleted file mode 100644
index 39c0e091cf58..000000000000
--- a/include/asm-sh/freq.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * include/asm-sh/freq.h
- *
- * Copyright (C) 2002, 2003 Paul Mundt
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-#ifndef __ASM_SH_FREQ_H
-#define __ASM_SH_FREQ_H
-#ifdef __KERNEL__
-
-#include <asm/cpu/freq.h>
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_SH_FREQ_H */
diff --git a/include/asm-sh/gpio.h b/include/asm-sh/gpio.h
deleted file mode 100644
index 9bb27e0f11a4..000000000000
--- a/include/asm-sh/gpio.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- *  include/asm-sh/gpio.h
- *
- *  Copyright (C) 2007 Markus Brunner, Mark Jonas
- *
- *  Addresses for the Pin Function Controller
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_SH_GPIO_H
-#define __ASM_SH_GPIO_H
-
-#if defined(CONFIG_CPU_SH3)
-#include <asm/cpu/gpio.h>
-#endif
-
-#endif /* __ASM_SH_GPIO_H */
diff --git a/include/asm-sh/hw_irq.h b/include/asm-sh/hw_irq.h
deleted file mode 100644
index 7438d1e21bc9..000000000000
--- a/include/asm-sh/hw_irq.h
+++ /dev/null
@@ -1,123 +0,0 @@
-#ifndef __ASM_SH_HW_IRQ_H
-#define __ASM_SH_HW_IRQ_H
-
-#include <linux/init.h>
-#include <asm/atomic.h>
-
-extern atomic_t irq_err_count;
-
-struct ipr_data {
-        unsigned char irq;
-        unsigned char ipr_idx;          /* Index for the IPR registered */
-        unsigned char shift;            /* Number of bits to shift the data */
-        unsigned char priority;         /* The priority */
-};
-
-struct ipr_desc {
-        unsigned long *ipr_offsets;
-        unsigned int nr_offsets;
-        struct ipr_data *ipr_data;
-        unsigned int nr_irqs;
-        struct irq_chip chip;
-};
-
-void register_ipr_controller(struct ipr_desc *);
-
-typedef unsigned char intc_enum;
-
-struct intc_vect {
-        intc_enum enum_id;
-        unsigned short vect;
-};
-
-#define INTC_VECT(enum_id, vect) { enum_id, vect }
-#define INTC_IRQ(enum_id, irq) INTC_VECT(enum_id, irq2evt(irq))
-
-struct intc_group {
-        intc_enum enum_id;
-        intc_enum enum_ids[32];
-};
-
-#define INTC_GROUP(enum_id, ids...) { enum_id, { ids } }
-
-struct intc_mask_reg {
-        unsigned long set_reg, clr_reg, reg_width;
-        intc_enum enum_ids[32];
-#ifdef CONFIG_SMP
-        unsigned long smp;
-#endif
-};
-
-struct intc_prio_reg {
-        unsigned long set_reg, clr_reg, reg_width, field_width;
-        intc_enum enum_ids[16];
-#ifdef CONFIG_SMP
-        unsigned long smp;
-#endif
-};
-
-struct intc_sense_reg {
-        unsigned long reg, reg_width, field_width;
-        intc_enum enum_ids[16];
-};
-
-#ifdef CONFIG_SMP
-#define INTC_SMP(stride, nr) .smp = (stride) | ((nr) << 8)
-#else
-#define INTC_SMP(stride, nr)
-#endif
-
-struct intc_desc {
-        struct intc_vect *vectors;
-        unsigned int nr_vectors;
-        struct intc_group *groups;
-        unsigned int nr_groups;
-        struct intc_mask_reg *mask_regs;
-        unsigned int nr_mask_regs;
-        struct intc_prio_reg *prio_regs;
-        unsigned int nr_prio_regs;
-        struct intc_sense_reg *sense_regs;
-        unsigned int nr_sense_regs;
-        char *name;
-#ifdef CONFIG_CPU_SH3
-        struct intc_mask_reg *ack_regs;
-        unsigned int nr_ack_regs;
-#endif
-};
-
-#define _INTC_ARRAY(a) a, sizeof(a)/sizeof(*a)
-#define DECLARE_INTC_DESC(symbol, chipname, vectors, groups,            \
-        mask_regs, prio_regs, sense_regs)                               \
-struct intc_desc symbol __initdata = {                                  \
-        _INTC_ARRAY(vectors), _INTC_ARRAY(groups),                      \
-        _INTC_ARRAY(mask_regs), _INTC_ARRAY(prio_regs),                 \
-        _INTC_ARRAY(sense_regs),                                        \
-        chipname,                                                       \
-}
-
-#ifdef CONFIG_CPU_SH3
-#define DECLARE_INTC_DESC_ACK(symbol, chipname, vectors, groups,        \
-        mask_regs, prio_regs, sense_regs, ack_regs)                     \
-struct intc_desc symbol __initdata = {                                  \
-        _INTC_ARRAY(vectors), _INTC_ARRAY(groups),                      \
-        _INTC_ARRAY(mask_regs), _INTC_ARRAY(prio_regs),                 \
-        _INTC_ARRAY(sense_regs),                                        \
-        chipname,                                                       \
-        _INTC_ARRAY(ack_regs),                                          \
-}
-#endif
-
-void __init register_intc_controller(struct intc_desc *desc);
-int intc_set_priority(unsigned int irq, unsigned int prio);
-
-void __init plat_irq_setup(void);
-#ifdef CONFIG_CPU_SH3
-void __init plat_irq_setup_sh3(void);
-#endif
-
-enum { IRQ_MODE_IRQ, IRQ_MODE_IRQ7654, IRQ_MODE_IRQ3210,
-       IRQ_MODE_IRL7654_MASK, IRQ_MODE_IRL3210_MASK,
-       IRQ_MODE_IRL7654, IRQ_MODE_IRL3210 };
-void __init plat_irq_setup_pins(int mode);
-
-#endif /* __ASM_SH_HW_IRQ_H */
diff --git a/include/asm-sh/irq.h b/include/asm-sh/irq.h
deleted file mode 100644
index ca66e5df69dc..000000000000
--- a/include/asm-sh/irq.h
+++ /dev/null
@@ -1,57 +0,0 @@
-#ifndef __ASM_SH_IRQ_H
-#define __ASM_SH_IRQ_H
-
-#include <asm/machvec.h>
-
-/*
- * A sane default based on a reasonable vector table size, platforms are
- * advised to cap this at the hard limit that they're interested in
- * through the machvec.
- */
-#define NR_IRQS 256
-
-/*
- * Convert back and forth between INTEVT and IRQ values.
- */
-#ifdef CONFIG_CPU_HAS_INTEVT
-#define evt2irq(evt)            (((evt) >> 5) - 16)
-#define irq2evt(irq)            (((irq) + 16) << 5)
-#else
-#define evt2irq(evt)            (evt)
-#define irq2evt(irq)            (irq)
-#endif
-
-/*
- * Simple Mask Register Support
- */
-extern void make_maskreg_irq(unsigned int irq);
-extern unsigned short *irq_mask_register;
-
-/*
- * PINT IRQs
- */
-void init_IRQ_pint(void);
-void make_imask_irq(unsigned int irq);
-
-static inline int generic_irq_demux(int irq)
-{
-        return irq;
-}
-
-#define irq_canonicalize(irq)   (irq)
-#define irq_demux(irq)          sh_mv.mv_irq_demux(irq)
-
-#ifdef CONFIG_IRQSTACKS
-extern void irq_ctx_init(int cpu);
-extern void irq_ctx_exit(int cpu);
-# define __ARCH_HAS_DO_SOFTIRQ
-#else
-# define irq_ctx_init(cpu) do { } while (0)
-# define irq_ctx_exit(cpu) do { } while (0)
-#endif
-
-#ifdef CONFIG_CPU_SH5
-#include <asm/cpu/irq.h>
-#endif
-
-#endif /* __ASM_SH_IRQ_H */
diff --git a/include/asm-sh/irqflags_64.h b/include/asm-sh/irqflags_64.h
deleted file mode 100644
index 4f6b8a56e7bd..000000000000
--- a/include/asm-sh/irqflags_64.h
+++ /dev/null
@@ -1,85 +0,0 @@
-#ifndef __ASM_SH_IRQFLAGS_64_H
-#define __ASM_SH_IRQFLAGS_64_H
-
-#include <asm/cpu/registers.h>
-
-#define SR_MASK_LL      0x00000000000000f0LL
-#define SR_BL_LL        0x0000000010000000LL
-
-static inline void raw_local_irq_enable(void)
-{
-        unsigned long long __dummy0, __dummy1 = ~SR_MASK_LL;
-
-        __asm__ __volatile__("getcon    " __SR ", %0\n\t"
-                             "and       %0, %1, %0\n\t"
-                             "putcon    %0, " __SR "\n\t"
-                             : "=&r" (__dummy0)
-                             : "r" (__dummy1));
-}
-
-static inline void raw_local_irq_disable(void)
-{
-        unsigned long long __dummy0, __dummy1 = SR_MASK_LL;
-
-        __asm__ __volatile__("getcon    " __SR ", %0\n\t"
-                             "or        %0, %1, %0\n\t"
-                             "putcon    %0, " __SR "\n\t"
-                             : "=&r" (__dummy0)
-                             : "r" (__dummy1));
-}
-
-static inline void set_bl_bit(void)
-{
-        unsigned long long __dummy0, __dummy1 = SR_BL_LL;
-
-        __asm__ __volatile__("getcon    " __SR ", %0\n\t"
-                             "or        %0, %1, %0\n\t"
-                             "putcon    %0, " __SR "\n\t"
-                             : "=&r" (__dummy0)
-                             : "r" (__dummy1));
-
-}
-
-static inline void clear_bl_bit(void)
-{
-        unsigned long long __dummy0, __dummy1 = ~SR_BL_LL;
-
-        __asm__ __volatile__("getcon    " __SR ", %0\n\t"
-                             "and       %0, %1, %0\n\t"
-                             "putcon    %0, " __SR "\n\t"
-                             : "=&r" (__dummy0)
-                             : "r" (__dummy1));
-}
-
-static inline unsigned long __raw_local_save_flags(void)
-{
-        unsigned long long __dummy = SR_MASK_LL;
-        unsigned long flags;
-
-        __asm__ __volatile__ (
-                "getcon " __SR ", %0\n\t"
-                "and    %0, %1, %0"
-                : "=&r" (flags)
-                : "r" (__dummy));
-
-        return flags;
-}
-
-static inline unsigned long __raw_local_irq_save(void)
-{
-        unsigned long long __dummy0, __dummy1 = SR_MASK_LL;
-        unsigned long flags;
-
-        __asm__ __volatile__ (
-                "getcon " __SR ", %1\n\t"
-                "or     %1, r63, %0\n\t"
-                "or     %1, %2, %1\n\t"
-                "putcon %1, " __SR "\n\t"
-                "and    %0, %2, %0"
-                : "=&r" (flags), "=&r" (__dummy0)
-                : "r" (__dummy1));
-
-        return flags;
-}
-
-#endif /* __ASM_SH_IRQFLAGS_64_H */
diff --git a/include/asm-sh/migor.h b/include/asm-sh/migor.h
deleted file mode 100644
index 2329363afdc3..000000000000
--- a/include/asm-sh/migor.h
+++ /dev/null
@@ -1,58 +0,0 @@
-#ifndef __ASM_SH_MIGOR_H
-#define __ASM_SH_MIGOR_H
-
-/*
- * linux/include/asm-sh/migor.h
- *
- * Copyright (C) 2008 Renesas Solutions
- *
- * Portions Copyright (C) 2007 Nobuhiro Iwamatsu
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- */
-#include <asm/addrspace.h>
-
-/* GPIO */
-#define MSTPCR0 0xa4150030
-#define MSTPCR1 0xa4150034
-#define MSTPCR2 0xa4150038
-
-#define PORT_PACR 0xa4050100
-#define PORT_PDCR 0xa4050106
-#define PORT_PECR 0xa4050108
-#define PORT_PHCR 0xa405010e
-#define PORT_PJCR 0xa4050110
-#define PORT_PKCR 0xa4050112
-#define PORT_PLCR 0xa4050114
-#define PORT_PMCR 0xa4050116
-#define PORT_PRCR 0xa405011c
-#define PORT_PWCR 0xa4050146
-#define PORT_PXCR 0xa4050148
-#define PORT_PYCR 0xa405014a
-#define PORT_PZCR 0xa405014c
-#define PORT_PADR 0xa4050120
-#define PORT_PWDR 0xa4050166
-
-#define PORT_HIZCRA 0xa4050158
-#define PORT_HIZCRC 0xa405015c
-
-#define PORT_MSELCRB 0xa4050182
-
-#define MSTPCR1 0xa4150034
-#define MSTPCR2 0xa4150038
-
-#define PORT_PSELA 0xa405014e
-#define PORT_PSELB 0xa4050150
-#define PORT_PSELC 0xa4050152
-#define PORT_PSELD 0xa4050154
-
-#define PORT_HIZCRA 0xa4050158
-#define PORT_HIZCRB 0xa405015a
-#define PORT_HIZCRC 0xa405015c
-
-#define BSC_CS6ABCR 0xfec1001c
-
-#endif /* __ASM_SH_MIGOR_H */
diff --git a/include/asm-sh/mmu.h b/include/asm-sh/mmu.h
deleted file mode 100644
index eb0358c097d0..000000000000
--- a/include/asm-sh/mmu.h
+++ /dev/null
@@ -1,72 +0,0 @@
-#ifndef __MMU_H
-#define __MMU_H
-
-/* Default "unsigned long" context */
-typedef unsigned long mm_context_id_t[NR_CPUS];
-
-typedef struct {
-#ifdef CONFIG_MMU
-        mm_context_id_t         id;
-        void                    *vdso;
-#else
-        struct vm_list_struct   *vmlist;
-        unsigned long           end_brk;
-#endif
-} mm_context_t;
-
-/*
- * Privileged Space Mapping Buffer (PMB) definitions
- */
-#define PMB_PASCR               0xff000070
-#define PMB_IRMCR               0xff000078
-
-#define PMB_ADDR                0xf6100000
-#define PMB_DATA                0xf7100000
-#define PMB_ENTRY_MAX           16
-#define PMB_E_MASK              0x0000000f
-#define PMB_E_SHIFT             8
-
-#define PMB_SZ_16M              0x00000000
-#define PMB_SZ_64M              0x00000010
-#define PMB_SZ_128M             0x00000080
-#define PMB_SZ_512M             0x00000090
-#define PMB_SZ_MASK             PMB_SZ_512M
-#define PMB_C                   0x00000008
-#define PMB_WT                  0x00000001
-#define PMB_UB                  0x00000200
-#define PMB_V                   0x00000100
-
-#define PMB_NO_ENTRY            (-1)
-
-struct pmb_entry;
-
-struct pmb_entry {
-        unsigned long vpn;
-        unsigned long ppn;
-        unsigned long flags;
-
-        /*
-         * 0 .. NR_PMB_ENTRIES for specific entry selection, or
-         * PMB_NO_ENTRY to search for a free one
-         */
-        int entry;
-
-        struct pmb_entry *next;
-        /* Adjacent entry link for contiguous multi-entry mappings */
-        struct pmb_entry *link;
-};
-
-/* arch/sh/mm/pmb.c */
-int __set_pmb_entry(unsigned long vpn, unsigned long ppn,
-                    unsigned long flags, int *entry);
-int set_pmb_entry(struct pmb_entry *pmbe);
-void clear_pmb_entry(struct pmb_entry *pmbe);
-struct pmb_entry *pmb_alloc(unsigned long vpn, unsigned long ppn,
-                            unsigned long flags);
-void pmb_free(struct pmb_entry *pmbe);
-long pmb_remap(unsigned long virt, unsigned long phys,
-               unsigned long size, unsigned long flags);
-void pmb_unmap(unsigned long addr);
-
-#endif /* __MMU_H */
-
diff --git a/include/asm-sh/mmu_context.h b/include/asm-sh/mmu_context.h
deleted file mode 100644
index 87e812f68bb0..000000000000
--- a/include/asm-sh/mmu_context.h
+++ /dev/null
@@ -1,184 +0,0 @@
-/*
- * Copyright (C) 1999 Niibe Yutaka
- * Copyright (C) 2003 - 2007 Paul Mundt
- *
- * ASID handling idea taken from MIPS implementation.
- */
-#ifndef __ASM_SH_MMU_CONTEXT_H
-#define __ASM_SH_MMU_CONTEXT_H
-
-#ifdef __KERNEL__
-#include <asm/cpu/mmu_context.h>
-#include <asm/tlbflush.h>
-#include <asm/uaccess.h>
-#include <asm/io.h>
-#include <asm-generic/mm_hooks.h>
-
-/*
- * The MMU "context" consists of two things:
- *    (a) TLB cache version (or round, cycle whatever expression you like)
- *    (b) ASID (Address Space IDentifier)
- */
-#define MMU_CONTEXT_ASID_MASK           0x000000ff
-#define MMU_CONTEXT_VERSION_MASK        0xffffff00
-#define MMU_CONTEXT_FIRST_VERSION       0x00000100
-#define NO_CONTEXT                      0
-
-/* ASID is 8-bit value, so it can't be 0x100 */
-#define MMU_NO_ASID                     0x100
-
-#ifdef CONFIG_MMU
-#define asid_cache(cpu)         (cpu_data[cpu].asid_cache)
-#define cpu_context(cpu, mm)    ((mm)->context.id[cpu])
-
-#define cpu_asid(cpu, mm)       \
-        (cpu_context((cpu), (mm)) & MMU_CONTEXT_ASID_MASK)
-
-/*
- * Virtual Page Number mask
- */
-#define MMU_VPN_MASK    0xfffff000
-
-#if defined(CONFIG_SUPERH32)
-#include "mmu_context_32.h"
-#else
-#include "mmu_context_64.h"
-#endif
-
-/*
- * Get MMU context if needed.
- */
-static inline void get_mmu_context(struct mm_struct *mm, unsigned int cpu)
-{
-        unsigned long asid = asid_cache(cpu);
-
-        /* Check if we have old version of context. */
-        if (((cpu_context(cpu, mm) ^ asid) & MMU_CONTEXT_VERSION_MASK) == 0)
-                /* It's up to date, do nothing */
-                return;
-
-        /* It's old, we need to get new context with new version. */
-        if (!(++asid & MMU_CONTEXT_ASID_MASK)) {
-                /*
-                 * We exhaust ASID of this version.
-                 * Flush all TLB and start new cycle.
-                 */
-                flush_tlb_all();
-
-#ifdef CONFIG_SUPERH64
-                /*
-                 * The SH-5 cache uses the ASIDs, requiring both the I and D
-                 * cache to be flushed when the ASID is exhausted. Weak.
-                 */
-                flush_cache_all();
-#endif
-
-                /*
-                 * Fix version; Note that we avoid version #0
-                 * to distingush NO_CONTEXT.
-                 */
-                if (!asid)
-                        asid = MMU_CONTEXT_FIRST_VERSION;
-        }
-
-        cpu_context(cpu, mm) = asid_cache(cpu) = asid;
-}
-
-/*
- * Initialize the context related info for a new mm_struct
- * instance.
- */
-static inline int init_new_context(struct task_struct *tsk,
-                                   struct mm_struct *mm)
-{
-        int i;
-
-        for (i = 0; i < num_online_cpus(); i++)
-                cpu_context(i, mm) = NO_CONTEXT;
-
-        return 0;
-}
-
-/*
- * After we have set current->mm to a new value, this activates
- * the context for the new mm so we see the new mappings.
- */
-static inline void activate_context(struct mm_struct *mm, unsigned int cpu)
-{
-        get_mmu_context(mm, cpu);
-        set_asid(cpu_asid(cpu, mm));
-}
-
-static inline void switch_mm(struct mm_struct *prev,
-                             struct mm_struct *next,
-                             struct task_struct *tsk)
-{
-        unsigned int cpu = smp_processor_id();
-
-        if (likely(prev != next)) {
-                cpu_set(cpu, next->cpu_vm_mask);
-                set_TTB(next->pgd);
-                activate_context(next, cpu);
-        } else
-                if (!cpu_test_and_set(cpu, next->cpu_vm_mask))
-                        activate_context(next, cpu);
-}
-#else
-#define get_mmu_context(mm)             do { } while (0)
-#define init_new_context(tsk,mm)        (0)
-#define destroy_context(mm)             do { } while (0)
-#define set_asid(asid)                  do { } while (0)
-#define get_asid()                      (0)
-#define cpu_asid(cpu, mm)               ({ (void)cpu; 0; })
-#define switch_and_save_asid(asid)      (0)
-#define set_TTB(pgd)                    do { } while (0)
-#define get_TTB()                       (0)
-#define activate_context(mm,cpu)        do { } while (0)
-#define switch_mm(prev,next,tsk)        do { } while (0)
-#endif /* CONFIG_MMU */
-
-#define activate_mm(prev, next)         switch_mm((prev),(next),NULL)
-#define deactivate_mm(tsk,mm)           do { } while (0)
-#define enter_lazy_tlb(mm,tsk)          do { } while (0)
-
-#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4)
-/*
- * If this processor has an MMU, we need methods to turn it off/on ..
- * paging_init() will also have to be updated for the processor in
- * question.
- */
-static inline void enable_mmu(void)
-{
-        unsigned int cpu = smp_processor_id();
-
-        /* Enable MMU */
-        ctrl_outl(MMU_CONTROL_INIT, MMUCR);
-        ctrl_barrier();
-
-        if (asid_cache(cpu) == NO_CONTEXT)
-                asid_cache(cpu) = MMU_CONTEXT_FIRST_VERSION;
-
-        set_asid(asid_cache(cpu) & MMU_CONTEXT_ASID_MASK);
-}
-
-static inline void disable_mmu(void)
-{
-        unsigned long cr;
-
-        cr = ctrl_inl(MMUCR);
-        cr &= ~MMU_CONTROL_INIT;
-        ctrl_outl(cr, MMUCR);
-
-        ctrl_barrier();
-}
-#else
-/*
- * MMU control handlers for processors lacking memory
- * management hardware.
- */
-#define enable_mmu()    do { } while (0)
-#define disable_mmu()   do { } while (0)
-#endif
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_SH_MMU_CONTEXT_H */
diff --git a/include/asm-sh/mmu_context_64.h b/include/asm-sh/mmu_context_64.h
deleted file mode 100644
index 9649f1c07caf..000000000000
--- a/include/asm-sh/mmu_context_64.h
+++ /dev/null
@@ -1,78 +0,0 @@
-#ifndef __ASM_SH_MMU_CONTEXT_64_H
-#define __ASM_SH_MMU_CONTEXT_64_H
-
-/*
- * sh64-specific mmu_context interface.
- *
- * Copyright (C) 2000, 2001  Paolo Alberelli
- * Copyright (C) 2003 - 2007  Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <asm/cpu/registers.h>
-#include <asm/cacheflush.h>
-
-#define SR_ASID_MASK            0xffffffffff00ffffULL
-#define SR_ASID_SHIFT           16
-
-/*
- * Destroy context related info for an mm_struct that is about
- * to be put to rest.
- */
-static inline void destroy_context(struct mm_struct *mm)
-{
-        /* Well, at least free TLB entries */
-        flush_tlb_mm(mm);
-}
-
-static inline unsigned long get_asid(void)
-{
-        unsigned long long sr;
-
-        asm volatile ("getcon   " __SR ", %0\n\t"
-                      : "=r" (sr));
-
-        sr = (sr >> SR_ASID_SHIFT) & MMU_CONTEXT_ASID_MASK;
-        return (unsigned long) sr;
-}
-
-/* Set ASID into SR */
-static inline void set_asid(unsigned long asid)
-{
-        unsigned long long sr, pc;
-
-        asm volatile ("getcon   " __SR ", %0" : "=r" (sr));
-
-        sr = (sr & SR_ASID_MASK) | (asid << SR_ASID_SHIFT);
-
-        /*
-         * It is possible that this function may be inlined and so to avoid
-         * the assembler reporting duplicate symbols we make use of the
-         * gas trick of generating symbols using numerics and forward
-         * reference.
-         */
-        asm volatile ("movi     1, %1\n\t"
-                      "shlli    %1, 28, %1\n\t"
-                      "or       %0, %1, %1\n\t"
-                      "putcon   %1, " __SR "\n\t"
-                      "putcon   %0, " __SSR "\n\t"
-                      "movi     1f, %1\n\t"
-                      "ori      %1, 1 , %1\n\t"
-                      "putcon   %1, " __SPC "\n\t"
-                      "rte\n"
-                      "1:\n\t"
-                      : "=r" (sr), "=r" (pc) : "0" (sr));
-}
-
-/* arch/sh/kernel/cpu/sh5/entry.S */
-extern unsigned long switch_and_save_asid(unsigned long new_asid);
-
-/* No spare register to twiddle, so use a software cache */
-extern pgd_t *mmu_pdtp_cache;
-
-#define set_TTB(pgd)    (mmu_pdtp_cache = (pgd))
-#define get_TTB()       (mmu_pdtp_cache)
-
-#endif /* __ASM_SH_MMU_CONTEXT_64_H */
diff --git a/include/asm-sh/page.h b/include/asm-sh/page.h
deleted file mode 100644
index 5dc01d2fcc4c..000000000000
--- a/include/asm-sh/page.h
+++ /dev/null
@@ -1,181 +0,0 @@
-#ifndef __ASM_SH_PAGE_H
-#define __ASM_SH_PAGE_H
-
-/*
- * Copyright (C) 1999  Niibe Yutaka
- */
-
-#include <linux/const.h>
-
-/* PAGE_SHIFT determines the page size */
-#if defined(CONFIG_PAGE_SIZE_4KB)
-# define PAGE_SHIFT     12
-#elif defined(CONFIG_PAGE_SIZE_8KB)
-# define PAGE_SHIFT     13
-#elif defined(CONFIG_PAGE_SIZE_64KB)
-# define PAGE_SHIFT     16
-#else
-# error "Bogus kernel page size?"
-#endif
-
-#define PAGE_SIZE       (_AC(1, UL) << PAGE_SHIFT)
-#define PAGE_MASK       (~(PAGE_SIZE-1))
-#define PTE_MASK        PAGE_MASK
-
-#if defined(CONFIG_HUGETLB_PAGE_SIZE_64K)
-#define HPAGE_SHIFT     16
-#elif defined(CONFIG_HUGETLB_PAGE_SIZE_256K)
-#define HPAGE_SHIFT     18
-#elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB)
-#define HPAGE_SHIFT     20
-#elif defined(CONFIG_HUGETLB_PAGE_SIZE_4MB)
-#define HPAGE_SHIFT     22
-#elif defined(CONFIG_HUGETLB_PAGE_SIZE_64MB)
-#define HPAGE_SHIFT     26
-#elif defined(CONFIG_HUGETLB_PAGE_SIZE_512MB)
-#define HPAGE_SHIFT     29
-#endif
-
-#ifdef CONFIG_HUGETLB_PAGE
-#define HPAGE_SIZE              (1UL << HPAGE_SHIFT)
-#define HPAGE_MASK              (~(HPAGE_SIZE-1))
-#define HUGETLB_PAGE_ORDER      (HPAGE_SHIFT-PAGE_SHIFT)
-#endif
-
-#ifndef __ASSEMBLY__
-
-extern unsigned long shm_align_mask;
-extern unsigned long max_low_pfn, min_low_pfn;
-extern unsigned long memory_start, memory_end;
-
-extern void clear_page(void *to);
-extern void copy_page(void *to, void *from);
-
-#if !defined(CONFIG_CACHE_OFF) && defined(CONFIG_MMU) && \
-        (defined(CONFIG_CPU_SH5) || defined(CONFIG_CPU_SH4) || \
-         defined(CONFIG_SH7705_CACHE_32KB))
-struct page;
-struct vm_area_struct;
-extern void clear_user_page(void *to, unsigned long address, struct page *page);
-extern void copy_user_page(void *to, void *from, unsigned long address,
-                           struct page *page);
-#if defined(CONFIG_CPU_SH4)
-extern void copy_user_highpage(struct page *to, struct page *from,
-                               unsigned long vaddr, struct vm_area_struct *vma);
-#define __HAVE_ARCH_COPY_USER_HIGHPAGE
-#endif
-#else
-#define clear_user_page(page, vaddr, pg)        clear_page(page)
-#define copy_user_page(to, from, vaddr, pg)     copy_page(to, from)
-#endif
-
-/*
- * These are used to make use of C type-checking..
- */
-#ifdef CONFIG_X2TLB
-typedef struct { unsigned long pte_low, pte_high; } pte_t;
-typedef struct { unsigned long long pgprot; } pgprot_t;
-typedef struct { unsigned long long pgd; } pgd_t;
-#define pte_val(x) \
-        ((x).pte_low | ((unsigned long long)(x).pte_high << 32))
-#define __pte(x) \
-        ({ pte_t __pte = {(x), ((unsigned long long)(x)) >> 32}; __pte; })
-#elif defined(CONFIG_SUPERH32)
-typedef struct { unsigned long pte_low; } pte_t;
-typedef struct { unsigned long pgprot; } pgprot_t;
-typedef struct { unsigned long pgd; } pgd_t;
-#define pte_val(x)      ((x).pte_low)
-#define __pte(x)        ((pte_t) { (x) } )
-#else
-typedef struct { unsigned long long pte_low; } pte_t;
-typedef struct { unsigned long pgprot; } pgprot_t;
-typedef struct { unsigned long pgd; } pgd_t;
-#define pte_val(x)      ((x).pte_low)
-#define __pte(x)        ((pte_t) { (x) } )
-#endif
-
-#define pgd_val(x)      ((x).pgd)
-#define pgprot_val(x)   ((x).pgprot)
-
-#define __pgd(x) ((pgd_t) { (x) } )
-#define __pgprot(x)     ((pgprot_t) { (x) } )
-
-typedef struct page *pgtable_t;
-
-#endif /* !__ASSEMBLY__ */
-
-/*
- * __MEMORY_START and SIZE are the physical addresses and size of RAM.
- */
-#define __MEMORY_START          CONFIG_MEMORY_START
-#define __MEMORY_SIZE           CONFIG_MEMORY_SIZE
-
-/*
- * PAGE_OFFSET is the virtual address of the start of kernel address
- * space.
- */
-#define PAGE_OFFSET             CONFIG_PAGE_OFFSET
-
-/*
- * Virtual to physical RAM address translation.
- *
- * In 29 bit mode, the physical offset of RAM from address 0 is visible in
- * the kernel virtual address space, and thus we don't have to take
- * this into account when translating. However in 32 bit mode this offset
- * is not visible (it is part of the PMB mapping) and so needs to be
- * added or subtracted as required.
- */
-#ifdef CONFIG_32BIT
-#define __pa(x) ((unsigned long)(x)-PAGE_OFFSET+__MEMORY_START)
-#define __va(x) ((void *)((unsigned long)(x)+PAGE_OFFSET-__MEMORY_START))
-#else
-#define __pa(x) ((unsigned long)(x)-PAGE_OFFSET)
-#define __va(x) ((void *)((unsigned long)(x)+PAGE_OFFSET))
-#endif
-
-#define pfn_to_kaddr(pfn)       __va((pfn) << PAGE_SHIFT)
-#define page_to_phys(page)      (page_to_pfn(page) << PAGE_SHIFT)
-
-/*
- * PFN = physical frame number (ie PFN 0 == physical address 0)
- * PFN_START is the PFN of the first page of RAM. By defining this we
- * don't have struct page entries for the portion of address space
- * between physical address 0 and the start of RAM.
- */
-#define PFN_START               (__MEMORY_START >> PAGE_SHIFT)
-#define ARCH_PFN_OFFSET         (PFN_START)
-#define virt_to_page(kaddr)     pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
-#ifdef CONFIG_FLATMEM
-#define pfn_valid(pfn)          ((pfn) >= min_low_pfn && (pfn) < max_low_pfn)
-#endif
-#define virt_addr_valid(kaddr)  pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
-
-#define VM_DATA_DEFAULT_FLAGS   (VM_READ | VM_WRITE | VM_EXEC | \
-                                 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
-
-#include <asm-generic/memory_model.h>
-#include <asm-generic/page.h>
-
-/* vDSO support */
-#ifdef CONFIG_VSYSCALL
-#define __HAVE_ARCH_GATE_AREA
-#endif
-
-/*
- * Some drivers need to perform DMA into kmalloc'ed buffers
- * and so we have to increase the kmalloc minalign for this.
- */
-#define ARCH_KMALLOC_MINALIGN   L1_CACHE_BYTES
-
-#ifdef CONFIG_SUPERH64
-/*
- * While BYTES_PER_WORD == 4 on the current sh64 ABI, GCC will still
- * happily generate {ld/st}.q pairs, requiring us to have 8-byte
- * alignment to avoid traps. The kmalloc alignment is gauranteed by
- * virtue of L1_CACHE_BYTES, requiring this to only be special cased
- * for slab caches.
- */
-#define ARCH_SLAB_MINALIGN      8
-#endif
-
-#endif /* __ASM_SH_PAGE_H */
diff --git a/include/asm-sh/pgtable_32.h b/include/asm-sh/pgtable_32.h
deleted file mode 100644
index cbc731d35c25..000000000000
--- a/include/asm-sh/pgtable_32.h
+++ /dev/null
@@ -1,477 +0,0 @@
-#ifndef __ASM_SH_PGTABLE_32_H
-#define __ASM_SH_PGTABLE_32_H
-
-/*
- * Linux PTEL encoding.
- *
- * Hardware and software bit definitions for the PTEL value (see below for
- * notes on SH-X2 MMUs and 64-bit PTEs):
- *
- * - Bits 0 and 7 are reserved on SH-3 (_PAGE_WT and _PAGE_SZ1 on SH-4).
- *
- * - Bit 1 is the SH-bit, but is unused on SH-3 due to an MMU bug (the
- *   hardware PTEL value can't have the SH-bit set when MMUCR.IX is set,
- *   which is the default in cpu-sh3/mmu_context.h:MMU_CONTROL_INIT).
- *
- *   In order to keep this relatively clean, do not use these for defining
- *   SH-3 specific flags until all of the other unused bits have been
- *   exhausted.
- *
- * - Bit 9 is reserved by everyone and used by _PAGE_PROTNONE.
- *
- * - Bits 10 and 11 are low bits of the PPN that are reserved on >= 4K pages.
- *   Bit 10 is used for _PAGE_ACCESSED, bit 11 remains unused.
- *
- * - On 29 bit platforms, bits 31 to 29 are used for the space attributes
- *   and timing control which (together with bit 0) are moved into the
- *   old-style PTEA on the parts that support it.
- *
- * XXX: Leave the _PAGE_FILE and _PAGE_WT overhaul for a rainy day.
- *
- * SH-X2 MMUs and extended PTEs
- *
- * SH-X2 supports an extended mode TLB with split data arrays due to the
- * number of bits needed for PR and SZ (now EPR and ESZ) encodings. The PR and
- * SZ bit placeholders still exist in data array 1, but are implemented as
- * reserved bits, with the real logic existing in data array 2.
- *
- * The downside to this is that we can no longer fit everything in to a 32-bit
- * PTE encoding, so a 64-bit pte_t is necessary for these parts. On the plus
- * side, this gives us quite a few spare bits to play with for future usage.
- */
-/* Legacy and compat mode bits */
-#define _PAGE_WT        0x001           /* WT-bit on SH-4, 0 on SH-3 */
-#define _PAGE_HW_SHARED 0x002           /* SH-bit  : shared among processes */
-#define _PAGE_DIRTY     0x004           /* D-bit   : page changed */
-#define _PAGE_CACHABLE  0x008           /* C-bit   : cachable */
-#define _PAGE_SZ0       0x010           /* SZ0-bit : Size of page */
-#define _PAGE_RW        0x020           /* PR0-bit : write access allowed */
-#define _PAGE_USER      0x040           /* PR1-bit : user space access allowed*/
-#define _PAGE_SZ1       0x080           /* SZ1-bit : Size of page (on SH-4) */
-#define _PAGE_PRESENT   0x100           /* V-bit   : page is valid */
-#define _PAGE_PROTNONE  0x200           /* software: if not present  */
-#define _PAGE_ACCESSED  0x400           /* software: page referenced */
-#define _PAGE_FILE      _PAGE_WT        /* software: pagecache or swap? */
-
-#define _PAGE_SZ_MASK   (_PAGE_SZ0 | _PAGE_SZ1)
-#define _PAGE_PR_MASK   (_PAGE_RW | _PAGE_USER)
-
-/* Extended mode bits */
-#define _PAGE_EXT_ESZ0          0x0010  /* ESZ0-bit: Size of page */
-#define _PAGE_EXT_ESZ1          0x0020  /* ESZ1-bit: Size of page */
-#define _PAGE_EXT_ESZ2          0x0040  /* ESZ2-bit: Size of page */
-#define _PAGE_EXT_ESZ3          0x0080  /* ESZ3-bit: Size of page */
-
-#define _PAGE_EXT_USER_EXEC     0x0100  /* EPR0-bit: User space executable */
-#define _PAGE_EXT_USER_WRITE    0x0200  /* EPR1-bit: User space writable */
-#define _PAGE_EXT_USER_READ     0x0400  /* EPR2-bit: User space readable */
-
-#define _PAGE_EXT_KERN_EXEC     0x0800  /* EPR3-bit: Kernel space executable */
-#define _PAGE_EXT_KERN_WRITE    0x1000  /* EPR4-bit: Kernel space writable */
-#define _PAGE_EXT_KERN_READ     0x2000  /* EPR5-bit: Kernel space readable */
-
-/* Wrapper for extended mode pgprot twiddling */
-#define _PAGE_EXT(x)            ((unsigned long long)(x) << 32)
-
-/* software: moves to PTEA.TC (Timing Control) */
-#define _PAGE_PCC_AREA5 0x00000000      /* use BSC registers for area5 */
-#define _PAGE_PCC_AREA6 0x80000000      /* use BSC registers for area6 */
-
-/* software: moves to PTEA.SA[2:0] (Space Attributes) */
-#define _PAGE_PCC_IODYN 0x00000001      /* IO space, dynamically sized bus */
-#define _PAGE_PCC_IO8   0x20000000      /* IO space, 8 bit bus */
-#define _PAGE_PCC_IO16  0x20000001      /* IO space, 16 bit bus */
-#define _PAGE_PCC_COM8  0x40000000      /* Common Memory space, 8 bit bus */
-#define _PAGE_PCC_COM16 0x40000001      /* Common Memory space, 16 bit bus */
-#define _PAGE_PCC_ATR8  0x60000000      /* Attribute Memory space, 8 bit bus */
-#define _PAGE_PCC_ATR16 0x60000001      /* Attribute Memory space, 6 bit bus */
-
-/* Mask which drops unused bits from the PTEL value */
-#if defined(CONFIG_CPU_SH3)
-#define _PAGE_CLEAR_FLAGS       (_PAGE_PROTNONE | _PAGE_ACCESSED| \
-                                 _PAGE_FILE     | _PAGE_SZ1     | \
-                                 _PAGE_HW_SHARED)
-#elif defined(CONFIG_X2TLB)
-/* Get rid of the legacy PR/SZ bits when using extended mode */
-#define _PAGE_CLEAR_FLAGS       (_PAGE_PROTNONE | _PAGE_ACCESSED | \
-                                 _PAGE_FILE | _PAGE_PR_MASK | _PAGE_SZ_MASK)
-#else
-#define _PAGE_CLEAR_FLAGS       (_PAGE_PROTNONE | _PAGE_ACCESSED | _PAGE_FILE)
-#endif
-
-#define _PAGE_FLAGS_HARDWARE_MASK       (PHYS_ADDR_MASK & ~(_PAGE_CLEAR_FLAGS))
-
-/* Hardware flags, page size encoding */
-#if defined(CONFIG_X2TLB)
-# if defined(CONFIG_PAGE_SIZE_4KB)
-#  define _PAGE_FLAGS_HARD      _PAGE_EXT(_PAGE_EXT_ESZ0)
-# elif defined(CONFIG_PAGE_SIZE_8KB)
-#  define _PAGE_FLAGS_HARD      _PAGE_EXT(_PAGE_EXT_ESZ1)
-# elif defined(CONFIG_PAGE_SIZE_64KB)
-#  define _PAGE_FLAGS_HARD      _PAGE_EXT(_PAGE_EXT_ESZ2)
-# endif
-#else
-# if defined(CONFIG_PAGE_SIZE_4KB)
-#  define _PAGE_FLAGS_HARD      _PAGE_SZ0
-# elif defined(CONFIG_PAGE_SIZE_64KB)
-#  define _PAGE_FLAGS_HARD      _PAGE_SZ1
-# endif
-#endif
-
-#if defined(CONFIG_X2TLB)
-# if defined(CONFIG_HUGETLB_PAGE_SIZE_64K)
-#  define _PAGE_SZHUGE  (_PAGE_EXT_ESZ2)
-# elif defined(CONFIG_HUGETLB_PAGE_SIZE_256K)
-#  define _PAGE_SZHUGE  (_PAGE_EXT_ESZ0 | _PAGE_EXT_ESZ2)
-# elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB)
-#  define _PAGE_SZHUGE  (_PAGE_EXT_ESZ0 | _PAGE_EXT_ESZ1 | _PAGE_EXT_ESZ2)
-# elif defined(CONFIG_HUGETLB_PAGE_SIZE_4MB)
-#  define _PAGE_SZHUGE  (_PAGE_EXT_ESZ3)
-# elif defined(CONFIG_HUGETLB_PAGE_SIZE_64MB)
-#  define _PAGE_SZHUGE  (_PAGE_EXT_ESZ2 | _PAGE_EXT_ESZ3)
-# endif
-#else
-# if defined(CONFIG_HUGETLB_PAGE_SIZE_64K)
-#  define _PAGE_SZHUGE  (_PAGE_SZ1)
-# elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB)
-#  define _PAGE_SZHUGE  (_PAGE_SZ0 | _PAGE_SZ1)
-# endif
-#endif
-
-/*
- * Stub out _PAGE_SZHUGE if we don't have a good definition for it,
- * to make pte_mkhuge() happy.
- */
-#ifndef _PAGE_SZHUGE
-# define _PAGE_SZHUGE   (_PAGE_FLAGS_HARD)
-#endif
-
-#define _PAGE_CHG_MASK \
-        (PTE_MASK | _PAGE_ACCESSED | _PAGE_CACHABLE | _PAGE_DIRTY)
-
-#ifndef __ASSEMBLY__
-
-#if defined(CONFIG_X2TLB) /* SH-X2 TLB */
-#define PAGE_NONE       __pgprot(_PAGE_PROTNONE | _PAGE_CACHABLE | \
-                                 _PAGE_ACCESSED | _PAGE_FLAGS_HARD)
-
-#define PAGE_SHARED     __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
-                                 _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \
-                                 _PAGE_EXT(_PAGE_EXT_KERN_READ  | \
-                                           _PAGE_EXT_KERN_WRITE | \
-                                           _PAGE_EXT_USER_READ  | \
-                                           _PAGE_EXT_USER_WRITE))
-
-#define PAGE_EXECREAD   __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
-                                 _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \
-                                 _PAGE_EXT(_PAGE_EXT_KERN_EXEC | \
-                                           _PAGE_EXT_KERN_READ | \
-                                           _PAGE_EXT_USER_EXEC | \
-                                           _PAGE_EXT_USER_READ))
-
-#define PAGE_COPY       PAGE_EXECREAD
-
-#define PAGE_READONLY   __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
-                                 _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \
-                                 _PAGE_EXT(_PAGE_EXT_KERN_READ | \
-                                           _PAGE_EXT_USER_READ))
-
-#define PAGE_WRITEONLY  __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
-                                 _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \
-                                 _PAGE_EXT(_PAGE_EXT_KERN_WRITE | \
-                                           _PAGE_EXT_USER_WRITE))
-
-#define PAGE_RWX        __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
-                                 _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \
-                                 _PAGE_EXT(_PAGE_EXT_KERN_WRITE | \
-                                           _PAGE_EXT_KERN_READ  | \
-                                           _PAGE_EXT_KERN_EXEC  | \
-                                           _PAGE_EXT_USER_WRITE | \
-                                           _PAGE_EXT_USER_READ  | \
-                                           _PAGE_EXT_USER_EXEC))
-
-#define PAGE_KERNEL     __pgprot(_PAGE_PRESENT | _PAGE_CACHABLE | \
-                                 _PAGE_DIRTY | _PAGE_ACCESSED | \
-                                 _PAGE_HW_SHARED | _PAGE_FLAGS_HARD | \
-                                 _PAGE_EXT(_PAGE_EXT_KERN_READ | \
-                                           _PAGE_EXT_KERN_WRITE | \
-                                           _PAGE_EXT_KERN_EXEC))
-
-#define PAGE_KERNEL_NOCACHE \
-                        __pgprot(_PAGE_PRESENT | _PAGE_DIRTY | \
-                                 _PAGE_ACCESSED | _PAGE_HW_SHARED | \
-                                 _PAGE_FLAGS_HARD | \
-                                 _PAGE_EXT(_PAGE_EXT_KERN_READ | \
-                                           _PAGE_EXT_KERN_WRITE | \
-                                           _PAGE_EXT_KERN_EXEC))
-
-#define PAGE_KERNEL_RO  __pgprot(_PAGE_PRESENT | _PAGE_CACHABLE | \
-                                 _PAGE_DIRTY | _PAGE_ACCESSED | \
-                                 _PAGE_HW_SHARED | _PAGE_FLAGS_HARD | \
-                                 _PAGE_EXT(_PAGE_EXT_KERN_READ | \
-                                           _PAGE_EXT_KERN_EXEC))
-
-#define PAGE_KERNEL_PCC(slot, type) \
-                        __pgprot(_PAGE_PRESENT | _PAGE_DIRTY | \
-                                 _PAGE_ACCESSED | _PAGE_FLAGS_HARD | \
-                                 _PAGE_EXT(_PAGE_EXT_KERN_READ | \
-                                           _PAGE_EXT_KERN_WRITE | \
-                                           _PAGE_EXT_KERN_EXEC) \
-                                 (slot ? _PAGE_PCC_AREA5 : _PAGE_PCC_AREA6) | \
-                                 (type))
-
-#elif defined(CONFIG_MMU) /* SH-X TLB */
-#define PAGE_NONE       __pgprot(_PAGE_PROTNONE | _PAGE_CACHABLE | \
-                                 _PAGE_ACCESSED | _PAGE_FLAGS_HARD)
-
-#define PAGE_SHARED     __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | \
-                                 _PAGE_CACHABLE | _PAGE_ACCESSED | \
-                                 _PAGE_FLAGS_HARD)
-
-#define PAGE_COPY       __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_CACHABLE | \
-                                 _PAGE_ACCESSED | _PAGE_FLAGS_HARD)
-
-#define PAGE_READONLY   __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_CACHABLE | \
-                                 _PAGE_ACCESSED | _PAGE_FLAGS_HARD)
-
-#define PAGE_EXECREAD   PAGE_READONLY
-#define PAGE_RWX        PAGE_SHARED
-#define PAGE_WRITEONLY  PAGE_SHARED
-
-#define PAGE_KERNEL     __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_CACHABLE | \
-                                 _PAGE_DIRTY | _PAGE_ACCESSED | \
-                                 _PAGE_HW_SHARED | _PAGE_FLAGS_HARD)
-
-#define PAGE_KERNEL_NOCACHE \
-                        __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | \
-                                 _PAGE_ACCESSED | _PAGE_HW_SHARED | \
-                                 _PAGE_FLAGS_HARD)
-
-#define PAGE_KERNEL_RO  __pgprot(_PAGE_PRESENT | _PAGE_CACHABLE | \
-                                 _PAGE_DIRTY | _PAGE_ACCESSED | \
-                                 _PAGE_HW_SHARED | _PAGE_FLAGS_HARD)
-
-#define PAGE_KERNEL_PCC(slot, type) \
-                        __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | \
-                                 _PAGE_ACCESSED | _PAGE_FLAGS_HARD | \
-                                 (slot ? _PAGE_PCC_AREA5 : _PAGE_PCC_AREA6) | \
-                                 (type))
-#else /* no mmu */
-#define PAGE_NONE               __pgprot(0)
-#define PAGE_SHARED             __pgprot(0)
-#define PAGE_COPY               __pgprot(0)
-#define PAGE_EXECREAD           __pgprot(0)
-#define PAGE_RWX                __pgprot(0)
-#define PAGE_READONLY           __pgprot(0)
-#define PAGE_WRITEONLY          __pgprot(0)
-#define PAGE_KERNEL             __pgprot(0)
-#define PAGE_KERNEL_NOCACHE     __pgprot(0)
-#define PAGE_KERNEL_RO          __pgprot(0)
-
-#define PAGE_KERNEL_PCC(slot, type) \
-                                __pgprot(0)
-#endif
-
-#endif /* __ASSEMBLY__ */
-
-#ifndef __ASSEMBLY__
-
-/*
- * Certain architectures need to do special things when PTEs
- * within a page table are directly modified.  Thus, the following
- * hook is made available.
- */
-#ifdef CONFIG_X2TLB
-static inline void set_pte(pte_t *ptep, pte_t pte)
-{
-        ptep->pte_high = pte.pte_high;
-        smp_wmb();
-        ptep->pte_low = pte.pte_low;
-}
-#else
-#define set_pte(pteptr, pteval) (*(pteptr) = pteval)
-#endif
-
-#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
-
-/*
- * (pmds are folded into pgds so this doesn't get actually called,
- * but the define is needed for a generic inline function.)
- */
-#define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval)
-
-#define pfn_pte(pfn, prot) \
-        __pte(((unsigned long long)(pfn) << PAGE_SHIFT) | pgprot_val(prot))
-#define pfn_pmd(pfn, prot) \
-        __pmd(((unsigned long long)(pfn) << PAGE_SHIFT) | pgprot_val(prot))
-
-#define pte_none(x)             (!pte_val(x))
-#define pte_present(x)          ((x).pte_low & (_PAGE_PRESENT | _PAGE_PROTNONE))
-
-#define pte_clear(mm,addr,xp) do { set_pte_at(mm, addr, xp, __pte(0)); } while (0)
-
-#define pmd_none(x)     (!pmd_val(x))
-#define pmd_present(x)  (pmd_val(x))
-#define pmd_clear(xp)   do { set_pmd(xp, __pmd(0)); } while (0)
-#define pmd_bad(x)      (pmd_val(x) & ~PAGE_MASK)
-
-#define pages_to_mb(x)  ((x) >> (20-PAGE_SHIFT))
-#define pte_page(x)     pfn_to_page(pte_pfn(x))
-
-/*
- * The following only work if pte_present() is true.
- * Undefined behaviour if not..
- */
-#define pte_not_present(pte)    (!((pte).pte_low & _PAGE_PRESENT))
-#define pte_dirty(pte)          ((pte).pte_low & _PAGE_DIRTY)
-#define pte_young(pte)          ((pte).pte_low & _PAGE_ACCESSED)
-#define pte_file(pte)           ((pte).pte_low & _PAGE_FILE)
-#define pte_special(pte)        (0)
-
-#ifdef CONFIG_X2TLB
-#define pte_write(pte)          ((pte).pte_high & _PAGE_EXT_USER_WRITE)
-#else
-#define pte_write(pte)          ((pte).pte_low & _PAGE_RW)
-#endif
-
-#define PTE_BIT_FUNC(h,fn,op) \
-static inline pte_t pte_##fn(pte_t pte) { pte.pte_##h op; return pte; }
-
-#ifdef CONFIG_X2TLB
-/*
- * We cheat a bit in the SH-X2 TLB case. As the permission bits are
- * individually toggled (and user permissions are entirely decoupled from
- * kernel permissions), we attempt to couple them a bit more sanely here.
- */
-PTE_BIT_FUNC(high, wrprotect, &= ~_PAGE_EXT_USER_WRITE);
-PTE_BIT_FUNC(high, mkwrite, |= _PAGE_EXT_USER_WRITE | _PAGE_EXT_KERN_WRITE);
-PTE_BIT_FUNC(high, mkhuge, |= _PAGE_SZHUGE);
-#else
-PTE_BIT_FUNC(low, wrprotect, &= ~_PAGE_RW);
-PTE_BIT_FUNC(low, mkwrite, |= _PAGE_RW);
-PTE_BIT_FUNC(low, mkhuge, |= _PAGE_SZHUGE);
-#endif
-
-PTE_BIT_FUNC(low, mkclean, &= ~_PAGE_DIRTY);
-PTE_BIT_FUNC(low, mkdirty, |= _PAGE_DIRTY);
-PTE_BIT_FUNC(low, mkold, &= ~_PAGE_ACCESSED);
-PTE_BIT_FUNC(low, mkyoung, |= _PAGE_ACCESSED);
-
-static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
-
-/*
- * Macro and implementation to make a page protection as uncachable.
- */
-#define pgprot_writecombine(prot) \
-        __pgprot(pgprot_val(prot) & ~_PAGE_CACHABLE)
-
-#define pgprot_noncached         pgprot_writecombine
-
-/*
- * Conversion functions: convert a page and protection to a page entry,
- * and a page entry and page directory to the page they refer to.
- *
- * extern pte_t mk_pte(struct page *page, pgprot_t pgprot)
- */
-#define mk_pte(page, pgprot)    pfn_pte(page_to_pfn(page), (pgprot))
-
-static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
-{
-        pte.pte_low &= _PAGE_CHG_MASK;
-        pte.pte_low |= pgprot_val(newprot);
-
-#ifdef CONFIG_X2TLB
-        pte.pte_high |= pgprot_val(newprot) >> 32;
-#endif
-
-        return pte;
-}
-
-#define pmd_page_vaddr(pmd)     ((unsigned long)pmd_val(pmd))
-#define pmd_page(pmd)           (virt_to_page(pmd_val(pmd)))
-
-/* to find an entry in a page-table-directory. */
-#define pgd_index(address)      (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1))
-#define pgd_offset(mm, address) ((mm)->pgd+pgd_index(address))
-
-/* to find an entry in a kernel page-table-directory */
-#define pgd_offset_k(address)   pgd_offset(&init_mm, address)
-
-/* Find an entry in the third-level page table.. */
-#define pte_index(address)      ((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
-#define pte_offset_kernel(dir, address) \
-        ((pte_t *) pmd_page_vaddr(*(dir)) + pte_index(address))
-#define pte_offset_map(dir, address)            pte_offset_kernel(dir, address)
-#define pte_offset_map_nested(dir, address)     pte_offset_kernel(dir, address)
-
-#define pte_unmap(pte)          do { } while (0)
-#define pte_unmap_nested(pte)   do { } while (0)
-
-#ifdef CONFIG_X2TLB
-#define pte_ERROR(e) \
-        printk("%s:%d: bad pte %p(%08lx%08lx).\n", __FILE__, __LINE__, \
-               &(e), (e).pte_high, (e).pte_low)
-#define pgd_ERROR(e) \
-        printk("%s:%d: bad pgd %016llx.\n", __FILE__, __LINE__, pgd_val(e))
-#else
-#define pte_ERROR(e) \
-        printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
-#define pgd_ERROR(e) \
-        printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
-#endif
-
-/*
- * Encode and de-code a swap entry
- *
- * Constraints:
- *      _PAGE_FILE at bit 0
- *      _PAGE_PRESENT at bit 8
- *      _PAGE_PROTNONE at bit 9
- *
- * For the normal case, we encode the swap type into bits 0:7 and the
- * swap offset into bits 10:30. For the 64-bit PTE case, we keep the
- * preserved bits in the low 32-bits and use the upper 32 as the swap
- * offset (along with a 5-bit type), following the same approach as x86
- * PAE. This keeps the logic quite simple, and allows for a full 32
- * PTE_FILE_MAX_BITS, as opposed to the 29-bits we're constrained with
- * in the pte_low case.
- *
- * As is evident by the Alpha code, if we ever get a 64-bit unsigned
- * long (swp_entry_t) to match up with the 64-bit PTEs, this all becomes
- * much cleaner..
- *
- * NOTE: We should set ZEROs at the position of _PAGE_PRESENT
- *       and _PAGE_PROTNONE bits
- */
-#ifdef CONFIG_X2TLB
-#define __swp_type(x)                   ((x).val & 0x1f)
-#define __swp_offset(x)                 ((x).val >> 5)
-#define __swp_entry(type, offset)       ((swp_entry_t){ (type) | (offset) << 5})
-#define __pte_to_swp_entry(pte)         ((swp_entry_t){ (pte).pte_high })
-#define __swp_entry_to_pte(x)           ((pte_t){ 0, (x).val })
-
-/*
- * Encode and decode a nonlinear file mapping entry
- */
-#define pte_to_pgoff(pte)               ((pte).pte_high)
-#define pgoff_to_pte(off)               ((pte_t) { _PAGE_FILE, (off) })
-
-#define PTE_FILE_MAX_BITS               32
-#else
-#define __swp_type(x)                   ((x).val & 0xff)
-#define __swp_offset(x)                 ((x).val >> 10)
-#define __swp_entry(type, offset)       ((swp_entry_t){(type) | (offset) <<10})
-
-#define __pte_to_swp_entry(pte)         ((swp_entry_t) { pte_val(pte) >> 1 })
-#define __swp_entry_to_pte(x)           ((pte_t) { (x).val << 1 })
-
-/*
- * Encode and decode a nonlinear file mapping entry
- */
-#define PTE_FILE_MAX_BITS       29
-#define pte_to_pgoff(pte)       (pte_val(pte) >> 1)
-#define pgoff_to_pte(off)       ((pte_t) { ((off) << 1) | _PAGE_FILE })
-#endif
-
-#endif /* __ASSEMBLY__ */
-#endif /* __ASM_SH_PGTABLE_32_H */
diff --git a/include/asm-sh/processor.h b/include/asm-sh/processor.h
deleted file mode 100644
index b7c7ce80f03e..000000000000
--- a/include/asm-sh/processor.h
+++ /dev/null
@@ -1,65 +0,0 @@
-#ifndef __ASM_SH_PROCESSOR_H
-#define __ASM_SH_PROCESSOR_H
-
-#include <asm/cpu-features.h>
-
-#ifndef __ASSEMBLY__
-/*
- *  CPU type and hardware bug flags. Kept separately for each CPU.
- *
- *  Each one of these also needs a CONFIG_CPU_SUBTYPE_xxx entry
- *  in arch/sh/mm/Kconfig, as well as an entry in arch/sh/kernel/setup.c
- *  for parsing the subtype in get_cpu_subtype().
- */
-enum cpu_type {
-        /* SH-2 types */
-        CPU_SH7619,
-
-        /* SH-2A types */
-        CPU_SH7203, CPU_SH7206, CPU_SH7263, CPU_MXG,
-
-        /* SH-3 types */
-        CPU_SH7705, CPU_SH7706, CPU_SH7707,
-        CPU_SH7708, CPU_SH7708S, CPU_SH7708R,
-        CPU_SH7709, CPU_SH7709A, CPU_SH7710, CPU_SH7712,
-        CPU_SH7720, CPU_SH7721, CPU_SH7729,
-
-        /* SH-4 types */
-        CPU_SH7750, CPU_SH7750S, CPU_SH7750R, CPU_SH7751, CPU_SH7751R,
-        CPU_SH7760, CPU_SH4_202, CPU_SH4_501,
-
-        /* SH-4A types */
-        CPU_SH7763, CPU_SH7770, CPU_SH7780, CPU_SH7781, CPU_SH7785,
-        CPU_SH7723, CPU_SHX3,
-
-        /* SH4AL-DSP types */
-        CPU_SH7343, CPU_SH7722, CPU_SH7366,
-
-        /* SH-5 types */
-        CPU_SH5_101, CPU_SH5_103,
-
-        /* Unknown subtype */
-        CPU_SH_NONE
-};
-
-/* Forward decl */
-struct sh_cpuinfo;
-
-/* arch/sh/kernel/setup.c */
-const char *get_cpu_subtype(struct sh_cpuinfo *c);
-
-#ifdef CONFIG_VSYSCALL
-int vsyscall_init(void);
-#else
-#define vsyscall_init() do { } while (0)
-#endif
-
-#endif /* __ASSEMBLY__ */
-
-#ifdef CONFIG_SUPERH32
-# include "processor_32.h"
-#else
-# include "processor_64.h"
-#endif
-
-#endif /* __ASM_SH_PROCESSOR_H */
diff --git a/include/asm-sh/processor_32.h b/include/asm-sh/processor_32.h
deleted file mode 100644
index c09305d6a9d9..000000000000
--- a/include/asm-sh/processor_32.h
+++ /dev/null
@@ -1,219 +0,0 @@
-/*
- * include/asm-sh/processor.h
- *
- * Copyright (C) 1999, 2000  Niibe Yutaka
- * Copyright (C) 2002, 2003  Paul Mundt
- */
-
-#ifndef __ASM_SH_PROCESSOR_32_H
-#define __ASM_SH_PROCESSOR_32_H
-#ifdef __KERNEL__
-
-#include <linux/compiler.h>
-#include <asm/page.h>
-#include <asm/types.h>
-#include <asm/cache.h>
-#include <asm/ptrace.h>
-
-/*
- * Default implementation of macro that returns current
- * instruction pointer ("program counter").
- */
-#define current_text_addr() ({ void *pc; __asm__("mova  1f, %0\n1:":"=z" (pc)); pc; })
-
-/* Core Processor Version Register */
-#define CCN_PVR         0xff000030
-#define CCN_CVR         0xff000040
-#define CCN_PRR         0xff000044
-
-struct sh_cpuinfo {
-        unsigned int type;
-        unsigned long loops_per_jiffy;
-        unsigned long asid_cache;
-
-        struct cache_info icache;       /* Primary I-cache */
-        struct cache_info dcache;       /* Primary D-cache */
-        struct cache_info scache;       /* Secondary cache */
-
-        unsigned long flags;
-} __attribute__ ((aligned(L1_CACHE_BYTES)));
-
-extern struct sh_cpuinfo cpu_data[];
-#define boot_cpu_data cpu_data[0]
-#define current_cpu_data cpu_data[smp_processor_id()]
-#define raw_current_cpu_data cpu_data[raw_smp_processor_id()]
-
-/*
- * User space process size: 2GB.
- *
- * Since SH7709 and SH7750 have "area 7", we can't use 0x7c000000--0x7fffffff
- */
-#define TASK_SIZE       0x7c000000UL
-
-#define STACK_TOP       TASK_SIZE
-#define STACK_TOP_MAX   STACK_TOP
-
-/* This decides where the kernel will search for a free chunk of vm
- * space during mmap's.
- */
-#define TASK_UNMAPPED_BASE      (TASK_SIZE / 3)
-
-/*
- * Bit of SR register
- *
- * FD-bit:
- *     When it's set, it means the processor doesn't have right to use FPU,
- *     and it results exception when the floating operation is executed.
- *
- * IMASK-bit:
- *     Interrupt level mask
- */
-#define SR_DSP          0x00001000
-#define SR_IMASK        0x000000f0
-#define SR_FD           0x00008000
-
-/*
- * FPU structure and data
- */
-
-struct sh_fpu_hard_struct {
-        unsigned long fp_regs[16];
-        unsigned long xfp_regs[16];
-        unsigned long fpscr;
-        unsigned long fpul;
-
-        long status; /* software status information */
-};
-
-/* Dummy fpu emulator  */
-struct sh_fpu_soft_struct {
-        unsigned long fp_regs[16];
-        unsigned long xfp_regs[16];
-        unsigned long fpscr;
-        unsigned long fpul;
-
-        unsigned char lookahead;
-        unsigned long entry_pc;
-};
-
-union sh_fpu_union {
-        struct sh_fpu_hard_struct hard;
-        struct sh_fpu_soft_struct soft;
-};
-
-struct thread_struct {
-        /* Saved registers when thread is descheduled */
-        unsigned long sp;
-        unsigned long pc;
-
-        /* Hardware debugging registers */
-        unsigned long ubc_pc;
-
-        /* floating point info */
-        union sh_fpu_union fpu;
-};
-
-typedef struct {
-        unsigned long seg;
-} mm_segment_t;
-
-/* Count of active tasks with UBC settings */
-extern int ubc_usercnt;
-
-#define INIT_THREAD  {                                          \
-        .sp = sizeof(init_stack) + (long) &init_stack,          \
-}
-
-/*
- * Do necessary setup to start up a newly executed thread.
- */
-#define start_thread(regs, new_pc, new_sp)       \
-        set_fs(USER_DS);                         \
-        regs->pr = 0;                            \
-        regs->sr = SR_FD;       /* User mode. */ \
-        regs->pc = new_pc;                       \
-        regs->regs[15] = new_sp
-
-/* Forward declaration, a strange C thing */
-struct task_struct;
-struct mm_struct;
-
-/* Free all resources held by a thread. */
-extern void release_thread(struct task_struct *);
-
-/* Prepare to copy thread state - unlazy all lazy status */
-#define prepare_to_copy(tsk)    do { } while (0)
-
-/*
- * create a kernel thread without removing it from tasklists
- */
-extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
-
-/* Copy and release all segment info associated with a VM */
-#define copy_segments(p, mm)    do { } while(0)
-#define release_segments(mm)    do { } while(0)
-
-/*
- * FPU lazy state save handling.
- */
-
-static __inline__ void disable_fpu(void)
-{
-        unsigned long __dummy;
-
-        /* Set FD flag in SR */
-        __asm__ __volatile__("stc       sr, %0\n\t"
-                             "or        %1, %0\n\t"
-                             "ldc       %0, sr"
-                             : "=&r" (__dummy)
-                             : "r" (SR_FD));
-}
-
-static __inline__ void enable_fpu(void)
-{
-        unsigned long __dummy;
-
-        /* Clear out FD flag in SR */
-        __asm__ __volatile__("stc       sr, %0\n\t"
-                             "and       %1, %0\n\t"
-                             "ldc       %0, sr"
-                             : "=&r" (__dummy)
-                             : "r" (~SR_FD));
-}
-
-/* Double presision, NANS as NANS, rounding to nearest, no exceptions */
-#define FPSCR_INIT  0x00080000
-
-#define FPSCR_CAUSE_MASK        0x0001f000      /* Cause bits */
-#define FPSCR_FLAG_MASK         0x0000007c      /* Flag bits */
-
-/*
- * Return saved PC of a blocked thread.
- */
-#define thread_saved_pc(tsk)    (tsk->thread.pc)
-
-void show_trace(struct task_struct *tsk, unsigned long *sp,
-                struct pt_regs *regs);
-extern unsigned long get_wchan(struct task_struct *p);
-
-#define KSTK_EIP(tsk)  (task_pt_regs(tsk)->pc)
-#define KSTK_ESP(tsk)  (task_pt_regs(tsk)->regs[15])
-
-#define cpu_sleep()     __asm__ __volatile__ ("sleep" : : : "memory")
-#define cpu_relax()     barrier()
-
-#if defined(CONFIG_CPU_SH2A) || defined(CONFIG_CPU_SH3) || \
-    defined(CONFIG_CPU_SH4)
-#define PREFETCH_STRIDE         L1_CACHE_BYTES
-#define ARCH_HAS_PREFETCH
-#define ARCH_HAS_PREFETCHW
-static inline void prefetch(void *x)
-{
-        __asm__ __volatile__ ("pref @%0\n\t" : : "r" (x) : "memory");
-}
-
-#define prefetchw(x)    prefetch(x)
-#endif
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_SH_PROCESSOR_32_H */
diff --git a/include/asm-sh/processor_64.h b/include/asm-sh/processor_64.h
deleted file mode 100644
index 88a2edf8fa5d..000000000000
--- a/include/asm-sh/processor_64.h
+++ /dev/null
@@ -1,279 +0,0 @@
-#ifndef __ASM_SH_PROCESSOR_64_H
-#define __ASM_SH_PROCESSOR_64_H
-
-/*
- * include/asm-sh/processor_64.h
- *
- * Copyright (C) 2000, 2001  Paolo Alberelli
- * Copyright (C) 2003  Paul Mundt
- * Copyright (C) 2004  Richard Curnow
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASSEMBLY__
-
-#include <linux/compiler.h>
-#include <asm/page.h>
-#include <asm/types.h>
-#include <asm/cache.h>
-#include <asm/ptrace.h>
-#include <asm/cpu/registers.h>
-
-/*
- * Default implementation of macro that returns current
- * instruction pointer ("program counter").
- */
-#define current_text_addr() ({ \
-void *pc; \
-unsigned long long __dummy = 0; \
-__asm__("gettr  tr0, %1\n\t" \
-        "pta    4, tr0\n\t" \
-        "gettr  tr0, %0\n\t" \
-        "ptabs  %1, tr0\n\t"    \
-        :"=r" (pc), "=r" (__dummy) \
-        : "1" (__dummy)); \
-pc; })
-
-/*
- * TLB information structure
- *
- * Defined for both I and D tlb, per-processor.
- */
-struct tlb_info {
-        unsigned long long next;
-        unsigned long long first;
-        unsigned long long last;
-
-        unsigned int entries;
-        unsigned int step;
-
-        unsigned long flags;
-};
-
-struct sh_cpuinfo {
-        enum cpu_type type;
-        unsigned long loops_per_jiffy;
-        unsigned long asid_cache;
-
-        unsigned int cpu_clock, master_clock, bus_clock, module_clock;
-
-        /* Cache info */
-        struct cache_info icache;
-        struct cache_info dcache;
-        struct cache_info scache;
-
-        /* TLB info */
-        struct tlb_info itlb;
-        struct tlb_info dtlb;
-
-        unsigned long flags;
-};
-
-extern struct sh_cpuinfo cpu_data[];
-#define boot_cpu_data cpu_data[0]
-#define current_cpu_data cpu_data[smp_processor_id()]
-#define raw_current_cpu_data cpu_data[raw_smp_processor_id()]
-
-#endif
-
-/*
- * User space process size: 2GB - 4k.
- */
-#define TASK_SIZE       0x7ffff000UL
-
-#define STACK_TOP       TASK_SIZE
-#define STACK_TOP_MAX   STACK_TOP
-
-/* This decides where the kernel will search for a free chunk of vm
- * space during mmap's.
- */
-#define TASK_UNMAPPED_BASE      (TASK_SIZE / 3)
-
-/*
- * Bit of SR register
- *
- * FD-bit:
- *     When it's set, it means the processor doesn't have right to use FPU,
- *     and it results exception when the floating operation is executed.
- *
- * IMASK-bit:
- *     Interrupt level mask
- *
- * STEP-bit:
- *     Single step bit
- *
- */
-#if defined(CONFIG_SH64_SR_WATCH)
-#define SR_MMU   0x84000000
-#else
-#define SR_MMU   0x80000000
-#endif
-
-#define SR_IMASK 0x000000f0
-#define SR_FD    0x00008000
-#define SR_SSTEP 0x08000000
-
-#ifndef __ASSEMBLY__
-
-/*
- * FPU structure and data : require 8-byte alignment as we need to access it
-   with fld.p, fst.p
- */
-
-struct sh_fpu_hard_struct {
-        unsigned long fp_regs[64];
-        unsigned int fpscr;
-        /* long status; * software status information */
-};
-
-#if 0
-/* Dummy fpu emulator  */
-struct sh_fpu_soft_struct {
-        unsigned long long fp_regs[32];
-        unsigned int fpscr;
-        unsigned char lookahead;
-        unsigned long entry_pc;
-};
-#endif
-
-union sh_fpu_union {
-        struct sh_fpu_hard_struct hard;
-        /* 'hard' itself only produces 32 bit alignment, yet we need
-           to access it using 64 bit load/store as well. */
-        unsigned long long alignment_dummy;
-};
-
-struct thread_struct {
-        unsigned long sp;
-        unsigned long pc;
-        /* This stores the address of the pt_regs built during a context
-           switch, or of the register save area built for a kernel mode
-           exception.  It is used for backtracing the stack of a sleeping task
-           or one that traps in kernel mode. */
-        struct pt_regs *kregs;
-        /* This stores the address of the pt_regs constructed on entry from
-           user mode.  It is a fixed value over the lifetime of a process, or
-           NULL for a kernel thread. */
-        struct pt_regs *uregs;
-
-        unsigned long trap_no, error_code;
-        unsigned long address;
-        /* Hardware debugging registers may come here */
-
-        /* floating point info */
-        union sh_fpu_union fpu;
-};
-
-typedef struct {
-        unsigned long seg;
-} mm_segment_t;
-
-#define INIT_MMAP \
-{ &init_mm, 0, 0, NULL, PAGE_SHARED, VM_READ | VM_WRITE | VM_EXEC, 1, NULL, NULL }
-
-extern  struct pt_regs fake_swapper_regs;
-
-#define INIT_THREAD  {                          \
-        .sp             = sizeof(init_stack) +  \
-                          (long) &init_stack,   \
-        .pc             = 0,                    \
-        .kregs          = &fake_swapper_regs,   \
-        .uregs          = NULL,                 \
-        .trap_no        = 0,                    \
-        .error_code     = 0,                    \
-        .address        = 0,                    \
-        .fpu            = { { { 0, } }, }       \
-}
-
-/*
- * Do necessary setup to start up a newly executed thread.
- */
-#define SR_USER (SR_MMU | SR_FD)
-
-#define start_thread(regs, new_pc, new_sp)                      \
-        set_fs(USER_DS);                                        \
-        regs->sr = SR_USER;     /* User mode. */                \
-        regs->pc = new_pc - 4;  /* Compensate syscall exit */   \
-        regs->pc |= 1;          /* Set SHmedia ! */             \
-        regs->regs[18] = 0;                                     \
-        regs->regs[15] = new_sp
-
-/* Forward declaration, a strange C thing */
-struct task_struct;
-struct mm_struct;
-
-/* Free all resources held by a thread. */
-extern void release_thread(struct task_struct *);
-/*
- * create a kernel thread without removing it from tasklists
- */
-extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
-
-
-/* Copy and release all segment info associated with a VM */
-#define copy_segments(p, mm)    do { } while (0)
-#define release_segments(mm)    do { } while (0)
-#define forget_segments()       do { } while (0)
-#define prepare_to_copy(tsk)    do { } while (0)
-/*
- * FPU lazy state save handling.
- */
-
-static inline void disable_fpu(void)
-{
-        unsigned long long __dummy;
-
-        /* Set FD flag in SR */
-        __asm__ __volatile__("getcon    " __SR ", %0\n\t"
-                             "or        %0, %1, %0\n\t"
-                             "putcon    %0, " __SR "\n\t"
-                             : "=&r" (__dummy)
-                             : "r" (SR_FD));
-}
-
-static inline void enable_fpu(void)
-{
-        unsigned long long __dummy;
-
-        /* Clear out FD flag in SR */
-        __asm__ __volatile__("getcon    " __SR ", %0\n\t"
-                             "and       %0, %1, %0\n\t"
-                             "putcon    %0, " __SR "\n\t"
-                             : "=&r" (__dummy)
-                             : "r" (~SR_FD));
-}
-
-/* Round to nearest, no exceptions on inexact, overflow, underflow,
-   zero-divide, invalid.  Configure option for whether to flush denorms to
-   zero, or except if a denorm is encountered.  */
-#if defined(CONFIG_SH64_FPU_DENORM_FLUSH)
-#define FPSCR_INIT  0x00040000
-#else
-#define FPSCR_INIT  0x00000000
-#endif
-
-#ifdef CONFIG_SH_FPU
-/* Initialise the FP state of a task */
-void fpinit(struct sh_fpu_hard_struct *fpregs);
-#else
-#define fpinit(fpregs)  do { } while (0)
-#endif
-
-extern struct task_struct *last_task_used_math;
-
-/*
- * Return saved PC of a blocked thread.
- */
-#define thread_saved_pc(tsk)    (tsk->thread.pc)
-
-extern unsigned long get_wchan(struct task_struct *p);
-
-#define KSTK_EIP(tsk)  ((tsk)->thread.pc)
-#define KSTK_ESP(tsk)  ((tsk)->thread.sp)
-
-#define cpu_relax()     barrier()
-
-#endif  /* __ASSEMBLY__ */
-#endif /* __ASM_SH_PROCESSOR_64_H */
diff --git a/include/asm-sh/ptrace.h b/include/asm-sh/ptrace.h
deleted file mode 100644
index 7d36dc3bee69..000000000000
--- a/include/asm-sh/ptrace.h
+++ /dev/null
@@ -1,125 +0,0 @@
-#ifndef __ASM_SH_PTRACE_H
-#define __ASM_SH_PTRACE_H
-
-/*
- * Copyright (C) 1999, 2000  Niibe Yutaka
- *
- */
-#if defined(__SH5__)
-struct pt_regs {
-        unsigned long long pc;
-        unsigned long long sr;
-        unsigned long long syscall_nr;
-        unsigned long long regs[63];
-        unsigned long long tregs[8];
-        unsigned long long pad[2];
-};
-#else
-/*
- * GCC defines register number like this:
- * -----------------------------
- *       0 - 15 are integer registers
- *      17 - 22 are control/special registers
- *      24 - 39 fp registers
- *      40 - 47 xd registers
- *      48 -    fpscr register
- * -----------------------------
- *
- * We follows above, except:
- *      16 --- program counter (PC)
- *      22 --- syscall #
- *      23 --- floating point communication register
- */
-#define REG_REG0         0
-#define REG_REG15       15
-
-#define REG_PC          16
-
-#define REG_PR          17
-#define REG_SR          18
-#define REG_GBR         19
-#define REG_MACH        20
-#define REG_MACL        21
-
-#define REG_SYSCALL     22
-
-#define REG_FPREG0      23
-#define REG_FPREG15     38
-#define REG_XFREG0      39
-#define REG_XFREG15     54
-
-#define REG_FPSCR       55
-#define REG_FPUL        56
-
-/*
- * This struct defines the way the registers are stored on the
- * kernel stack during a system call or other kernel entry.
- */
-struct pt_regs {
-        unsigned long regs[16];
-        unsigned long pc;
-        unsigned long pr;
-        unsigned long sr;
-        unsigned long gbr;
-        unsigned long mach;
-        unsigned long macl;
-        long tra;
-};
-
-/*
- * This struct defines the way the DSP registers are stored on the
- * kernel stack during a system call or other kernel entry.
- */
-struct pt_dspregs {
-        unsigned long   a1;
-        unsigned long   a0g;
-        unsigned long   a1g;
-        unsigned long   m0;
-        unsigned long   m1;
-        unsigned long   a0;
-        unsigned long   x0;
-        unsigned long   x1;
-        unsigned long   y0;
-        unsigned long   y1;
-        unsigned long   dsr;
-        unsigned long   rs;
-        unsigned long   re;
-        unsigned long   mod;
-};
-
-#define PTRACE_GETDSPREGS       55
-#define PTRACE_SETDSPREGS       56
-#endif
-
-#ifdef __KERNEL__
-#include <asm/addrspace.h>
-
-#define user_mode(regs)                 (((regs)->sr & 0x40000000)==0)
-#define instruction_pointer(regs)       ((unsigned long)(regs)->pc)
-
-extern void show_regs(struct pt_regs *);
-
-#ifdef CONFIG_SH_DSP
-#define task_pt_regs(task) \
-        ((struct pt_regs *) (task_stack_page(task) + THREAD_SIZE \
-                 - sizeof(struct pt_dspregs) - sizeof(unsigned long)) - 1)
-#else
-#define task_pt_regs(task) \
-        ((struct pt_regs *) (task_stack_page(task) + THREAD_SIZE \
-                 - sizeof(unsigned long)) - 1)
-#endif
-
-static inline unsigned long profile_pc(struct pt_regs *regs)
-{
-        unsigned long pc = instruction_pointer(regs);
-
-#ifdef P2SEG
-        if (pc >= P2SEG && pc < P3SEG)
-                pc -= 0x20000000;
-#endif
-
-        return pc;
-}
-#endif /* __KERNEL__ */
-
-#endif /* __ASM_SH_PTRACE_H */
diff --git a/include/asm-sh/rtc.h b/include/asm-sh/rtc.h
deleted file mode 100644
index ec45ba8e11d9..000000000000
--- a/include/asm-sh/rtc.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef _ASM_RTC_H
-#define _ASM_RTC_H
-
-extern void (*board_time_init)(void);
-extern void (*rtc_sh_get_time)(struct timespec *);
-extern int (*rtc_sh_set_time)(const time_t);
-
-#define RTC_CAP_4_DIGIT_YEAR    (1 << 0)
-
-struct sh_rtc_platform_info {
-        unsigned long capabilities;
-};
-
-#include <asm/cpu/rtc.h>
-
-#endif /* _ASM_RTC_H */
diff --git a/include/asm-sh/se.h b/include/asm-sh/se.h
deleted file mode 100644
index bd2596c014a9..000000000000
--- a/include/asm-sh/se.h
+++ /dev/null
@@ -1,82 +0,0 @@
-#ifndef __ASM_SH_HITACHI_SE_H
-#define __ASM_SH_HITACHI_SE_H
-
-/*
- * linux/include/asm-sh/hitachi_se.h
- *
- * Copyright (C) 2000  Kazumoto Kojima
- *
- * Hitachi SolutionEngine support
- */
-
-/* Box specific addresses.  */
-
-#define PA_ROM          0x00000000      /* EPROM */
-#define PA_ROM_SIZE     0x00400000      /* EPROM size 4M byte */
-#define PA_FROM         0x01000000      /* EPROM */
-#define PA_FROM_SIZE    0x00400000      /* EPROM size 4M byte */
-#define PA_EXT1         0x04000000
-#define PA_EXT1_SIZE    0x04000000
-#define PA_EXT2         0x08000000
-#define PA_EXT2_SIZE    0x04000000
-#define PA_SDRAM        0x0c000000
-#define PA_SDRAM_SIZE   0x04000000
-
-#define PA_EXT4         0x12000000
-#define PA_EXT4_SIZE    0x02000000
-#define PA_EXT5         0x14000000
-#define PA_EXT5_SIZE    0x04000000
-#define PA_PCIC         0x18000000      /* MR-SHPC-01 PCMCIA */
-
-#define PA_83902        0xb0000000      /* DP83902A */
-#define PA_83902_IF     0xb0040000      /* DP83902A remote io port */
-#define PA_83902_RST    0xb0080000      /* DP83902A reset port */
-
-#define PA_SUPERIO      0xb0400000      /* SMC37C935A super io chip */
-#define PA_DIPSW0       0xb0800000      /* Dip switch 5,6 */
-#define PA_DIPSW1       0xb0800002      /* Dip switch 7,8 */
-#define PA_LED          0xb0c00000      /* LED */
-#if defined(CONFIG_CPU_SUBTYPE_SH7705)
-#define PA_BCR          0xb0e00000
-#else
-#define PA_BCR          0xb1400000      /* FPGA */
-#endif
-
-#define PA_MRSHPC       0xb83fffe0      /* MR-SHPC-01 PCMCIA controller */
-#define PA_MRSHPC_MW1   0xb8400000      /* MR-SHPC-01 memory window base */
-#define PA_MRSHPC_MW2   0xb8500000      /* MR-SHPC-01 attribute window base */
-#define PA_MRSHPC_IO    0xb8600000      /* MR-SHPC-01 I/O window base */
-#define MRSHPC_OPTION   (PA_MRSHPC + 6)
-#define MRSHPC_CSR      (PA_MRSHPC + 8)
-#define MRSHPC_ISR      (PA_MRSHPC + 10)
-#define MRSHPC_ICR      (PA_MRSHPC + 12)
-#define MRSHPC_CPWCR    (PA_MRSHPC + 14)
-#define MRSHPC_MW0CR1   (PA_MRSHPC + 16)
-#define MRSHPC_MW1CR1   (PA_MRSHPC + 18)
-#define MRSHPC_IOWCR1   (PA_MRSHPC + 20)
-#define MRSHPC_MW0CR2   (PA_MRSHPC + 22)
-#define MRSHPC_MW1CR2   (PA_MRSHPC + 24)
-#define MRSHPC_IOWCR2   (PA_MRSHPC + 26)
-#define MRSHPC_CDCR     (PA_MRSHPC + 28)
-#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30)
-
-#define BCR_ILCRA       (PA_BCR + 0)
-#define BCR_ILCRB       (PA_BCR + 2)
-#define BCR_ILCRC       (PA_BCR + 4)
-#define BCR_ILCRD       (PA_BCR + 6)
-#define BCR_ILCRE       (PA_BCR + 8)
-#define BCR_ILCRF       (PA_BCR + 10)
-#define BCR_ILCRG       (PA_BCR + 12)
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7705)
-#define IRQ_STNIC       12
-#define IRQ_CFCARD      14
-#else
-#define IRQ_STNIC       10
-#define IRQ_CFCARD      7
-#endif
-
-#define __IO_PREFIX     se
-#include <asm/io_generic.h>
-
-#endif  /* __ASM_SH_HITACHI_SE_H */
diff --git a/include/asm-sh/se7343.h b/include/asm-sh/se7343.h
deleted file mode 100644
index e7914a54aa96..000000000000
--- a/include/asm-sh/se7343.h
+++ /dev/null
@@ -1,82 +0,0 @@
-#ifndef __ASM_SH_HITACHI_SE7343_H
-#define __ASM_SH_HITACHI_SE7343_H
-
-/*
- * include/asm-sh/se/se7343.h
- *
- * Copyright (C) 2003 Takashi Kusuda <kusuda-takashi@hitachi-ul.co.jp>
- *
- * SH-Mobile SolutionEngine 7343 support
- */
-
-/* Box specific addresses.  */
-
-/* Area 0 */
-#define PA_ROM          0x00000000      /* EPROM */
-#define PA_ROM_SIZE     0x00400000      /* EPROM size 4M byte(Actually 2MB) */
-#define PA_FROM         0x00400000      /* Flash ROM */
-#define PA_FROM_SIZE    0x00400000      /* Flash size 4M byte */
-#define PA_SRAM         0x00800000      /* SRAM */
-#define PA_FROM_SIZE    0x00400000      /* SRAM size 4M byte */
-/* Area 1 */
-#define PA_EXT1         0x04000000
-#define PA_EXT1_SIZE    0x04000000
-/* Area 2 */
-#define PA_EXT2         0x08000000
-#define PA_EXT2_SIZE    0x04000000
-/* Area 3 */
-#define PA_SDRAM        0x0c000000
-#define PA_SDRAM_SIZE   0x04000000
-/* Area 4 */
-#define PA_PCIC         0x10000000      /* MR-SHPC-01 PCMCIA */
-#define PA_MRSHPC       0xb03fffe0      /* MR-SHPC-01 PCMCIA controller */
-#define PA_MRSHPC_MW1   0xb0400000      /* MR-SHPC-01 memory window base */
-#define PA_MRSHPC_MW2   0xb0500000      /* MR-SHPC-01 attribute window base */
-#define PA_MRSHPC_IO    0xb0600000      /* MR-SHPC-01 I/O window base */
-#define MRSHPC_OPTION   (PA_MRSHPC + 6)
-#define MRSHPC_CSR      (PA_MRSHPC + 8)
-#define MRSHPC_ISR      (PA_MRSHPC + 10)
-#define MRSHPC_ICR      (PA_MRSHPC + 12)
-#define MRSHPC_CPWCR    (PA_MRSHPC + 14)
-#define MRSHPC_MW0CR1   (PA_MRSHPC + 16)
-#define MRSHPC_MW1CR1   (PA_MRSHPC + 18)
-#define MRSHPC_IOWCR1   (PA_MRSHPC + 20)
-#define MRSHPC_MW0CR2   (PA_MRSHPC + 22)
-#define MRSHPC_MW1CR2   (PA_MRSHPC + 24)
-#define MRSHPC_IOWCR2   (PA_MRSHPC + 26)
-#define MRSHPC_CDCR     (PA_MRSHPC + 28)
-#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30)
-#define PA_LED          0xb0C00000      /* LED */
-#define LED_SHIFT       0
-#define PA_DIPSW        0xb0900000      /* Dip switch 31 */
-#define PA_CPLD_MODESET 0xb1400004      /* CPLD Mode set register */
-#define PA_CPLD_ST      0xb1400008      /* CPLD Interrupt status register */
-#define PA_CPLD_IMSK    0xb140000a      /* CPLD Interrupt mask register */
-/* Area 5 */
-#define PA_EXT5         0x14000000
-#define PA_EXT5_SIZE    0x04000000
-/* Area 6 */
-#define PA_LCD1         0xb8000000
-#define PA_LCD2         0xb8800000
-
-#define __IO_PREFIX     sh7343se
-#include <asm/io_generic.h>
-
-/* External Multiplexed interrupts */
-#define PC_IRQ0         OFFCHIP_IRQ_BASE
-#define PC_IRQ1         (PC_IRQ0 + 1)
-#define PC_IRQ2         (PC_IRQ1 + 1)
-#define PC_IRQ3         (PC_IRQ2 + 1)
-
-#define EXT_IRQ0        (PC_IRQ3 + 1)
-#define EXT_IRQ1        (EXT_IRQ0 + 1)
-#define EXT_IRQ2        (EXT_IRQ1 + 1)
-#define EXT_IRQ3        (EXT_IRQ2 + 1)
-
-#define USB_IRQ0        (EXT_IRQ3 + 1)
-#define USB_IRQ1        (USB_IRQ0 + 1)
-
-#define UART_IRQ0       (USB_IRQ1 + 1)
-#define UART_IRQ1       (UART_IRQ0 + 1)
-
-#endif  /* __ASM_SH_HITACHI_SE7343_H */
diff --git a/include/asm-sh/se7722.h b/include/asm-sh/se7722.h
deleted file mode 100644
index 3690fe5857a4..000000000000
--- a/include/asm-sh/se7722.h
+++ /dev/null
@@ -1,116 +0,0 @@
-#ifndef __ASM_SH_SE7722_H
-#define __ASM_SH_SE7722_H
-
-/*
- * linux/include/asm-sh/se7722.h
- *
- * Copyright (C) 2007  Nobuhiro Iwamatsu
- *
- * Hitachi UL SolutionEngine 7722 Support.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- */
-#include <asm/addrspace.h>
-
-/* Box specific addresses.  */
-#define SE_AREA0_WIDTH  4               /* Area0: 32bit */
-#define PA_ROM          0xa0000000      /* EPROM */
-#define PA_ROM_SIZE     0x00200000      /* EPROM size 2M byte */
-#define PA_FROM         0xa1000000      /* Flash-ROM */
-#define PA_FROM_SIZE    0x01000000      /* Flash-ROM size 16M byte */
-#define PA_EXT1         0xa4000000
-#define PA_EXT1_SIZE    0x04000000
-#define PA_SDRAM        0xaC000000      /* DDR-SDRAM(Area3) 64MB */
-#define PA_SDRAM_SIZE   0x04000000
-
-#define PA_EXT4         0xb0000000
-#define PA_EXT4_SIZE    0x04000000
-
-#define PA_PERIPHERAL   0xB0000000
-
-#define PA_PCIC         PA_PERIPHERAL                   /* MR-SHPC-01 PCMCIA */
-#define PA_MRSHPC       (PA_PERIPHERAL + 0x003fffe0)    /* MR-SHPC-01 PCMCIA controller */
-#define PA_MRSHPC_MW1   (PA_PERIPHERAL + 0x00400000)    /* MR-SHPC-01 memory window base */
-#define PA_MRSHPC_MW2   (PA_PERIPHERAL + 0x00500000)    /* MR-SHPC-01 attribute window base */
-#define PA_MRSHPC_IO    (PA_PERIPHERAL + 0x00600000)    /* MR-SHPC-01 I/O window base */
-#define MRSHPC_OPTION   (PA_MRSHPC + 6)
-#define MRSHPC_CSR      (PA_MRSHPC + 8)
-#define MRSHPC_ISR      (PA_MRSHPC + 10)
-#define MRSHPC_ICR      (PA_MRSHPC + 12)
-#define MRSHPC_CPWCR    (PA_MRSHPC + 14)
-#define MRSHPC_MW0CR1   (PA_MRSHPC + 16)
-#define MRSHPC_MW1CR1   (PA_MRSHPC + 18)
-#define MRSHPC_IOWCR1   (PA_MRSHPC + 20)
-#define MRSHPC_MW0CR2   (PA_MRSHPC + 22)
-#define MRSHPC_MW1CR2   (PA_MRSHPC + 24)
-#define MRSHPC_IOWCR2   (PA_MRSHPC + 26)
-#define MRSHPC_CDCR     (PA_MRSHPC + 28)
-#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30)
-
-#define PA_LED          (PA_PERIPHERAL + 0x00800000)    /* 8bit LED */
-#define PA_FPGA         (PA_PERIPHERAL + 0x01800000)    /* FPGA base address */
-
-#define PA_LAN          (PA_AREA6_IO + 0)               /* SMC LAN91C111 */
-/* GPIO */
-#define MSTPCR0         0xA4150030UL
-#define MSTPCR1         0xA4150034UL
-#define MSTPCR2         0xA4150038UL
-
-#define FPGA_IN         0xb1840000UL
-#define FPGA_OUT        0xb1840004UL
-
-#define PORT_PECR       0xA4050108UL
-#define PORT_PJCR       0xA4050110UL
-#define PORT_PSELD      0xA4050154UL
-#define PORT_PSELB      0xA4050150UL
-
-#define PORT_PSELC      0xA4050152UL
-#define PORT_PKCR       0xA4050112UL
-#define PORT_PHCR       0xA405010EUL
-#define PORT_PLCR       0xA4050114UL
-#define PORT_PMCR       0xA4050116UL
-#define PORT_PRCR       0xA405011CUL
-#define PORT_PXCR       0xA4050148UL
-#define PORT_PSELA      0xA405014EUL
-#define PORT_PYCR       0xA405014AUL
-#define PORT_PZCR       0xA405014CUL
-#define PORT_HIZCRA     0xA4050158UL
-#define PORT_HIZCRC     0xA405015CUL
-
-/* IRQ */
-#define IRQ0_IRQ        32
-#define IRQ1_IRQ        33
-
-#define IRQ01_MODE      0xb1800000
-#define IRQ01_STS       0xb1800004
-#define IRQ01_MASK      0xb1800008
-
-/* Bits in IRQ01_* registers */
-
-#define SE7722_FPGA_IRQ_USB     0 /* IRQ0 */
-#define SE7722_FPGA_IRQ_SMC     1 /* IRQ0 */
-#define SE7722_FPGA_IRQ_MRSHPC0 2 /* IRQ1 */
-#define SE7722_FPGA_IRQ_MRSHPC1 3 /* IRQ1 */
-#define SE7722_FPGA_IRQ_MRSHPC2 4 /* IRQ1 */
-#define SE7722_FPGA_IRQ_MRSHPC3 5 /* IRQ1 */
-
-#define SE7722_FPGA_IRQ_NR      6
-#define SE7722_FPGA_IRQ_BASE    110
-
-#define MRSHPC_IRQ3     (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_MRSHPC3)
-#define MRSHPC_IRQ2     (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_MRSHPC2)
-#define MRSHPC_IRQ1     (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_MRSHPC1)
-#define MRSHPC_IRQ0     (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_MRSHPC0)
-#define SMC_IRQ         (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_SMC)
-#define USB_IRQ         (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_USB)
-
-/* arch/sh/boards/se/7722/irq.c */
-void init_se7722_IRQ(void);
-
-#define __IO_PREFIX             se7722
-#include <asm/io_generic.h>
-
-#endif  /* __ASM_SH_SE7722_H */
diff --git a/include/asm-sh/segment.h b/include/asm-sh/segment.h
deleted file mode 100644
index e417eab4c7d7..000000000000
--- a/include/asm-sh/segment.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_SH_SEGMENT_H
-#define __ASM_SH_SEGMENT_H
-
-/* Only here because we have some old header files that expect it.. */
-
-#endif /* __ASM_SH_SEGMENT_H */
diff --git a/include/asm-sh/serial.h b/include/asm-sh/serial.h
deleted file mode 100644
index 21f6d330f189..000000000000
--- a/include/asm-sh/serial.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * include/asm-sh/serial.h
- *
- * Configuration details for 8250, 16450, 16550, etc. serial ports
- */
-
-#ifndef _ASM_SERIAL_H
-#define _ASM_SERIAL_H
-
-#include <linux/kernel.h>
-
-/*
- * This assumes you have a 1.8432 MHz clock for your UART.
- *
- * It'd be nice if someone built a serial card with a 24.576 MHz
- * clock, since the 16550A is capable of handling a top speed of 1.5
- * megabits/second; but this requires the faster clock.
- */
-#define BASE_BAUD ( 1843200 / 16 )
-
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
-
-#ifdef CONFIG_HD64465
-#include <asm/hd64465.h>
-
-#define SERIAL_PORT_DFNS                   \
-        /* UART CLK   PORT IRQ     FLAGS        */                      \
-        { 0, BASE_BAUD, 0x3F8, HD64465_IRQ_UART, STD_COM_FLAGS }  /* ttyS0 */
-
-#else
-
-#define SERIAL_PORT_DFNS
-
-#endif
-
-#endif /* _ASM_SERIAL_H */
diff --git a/include/asm-sh/system.h b/include/asm-sh/system.h
deleted file mode 100644
index e65b6b822cb3..000000000000
--- a/include/asm-sh/system.h
+++ /dev/null
@@ -1,198 +0,0 @@
-#ifndef __ASM_SH_SYSTEM_H
-#define __ASM_SH_SYSTEM_H
-
-/*
- * Copyright (C) 1999, 2000  Niibe Yutaka  &  Kaz Kojima
- * Copyright (C) 2002 Paul Mundt
- */
-
-#include <linux/irqflags.h>
-#include <linux/compiler.h>
-#include <linux/linkage.h>
-#include <asm/types.h>
-#include <asm/ptrace.h>
-
-#define AT_VECTOR_SIZE_ARCH 5 /* entries in ARCH_DLINFO */
-
-#if defined(CONFIG_CPU_SH4A) || defined(CONFIG_CPU_SH5)
-#define __icbi()                        \
-{                                       \
-        unsigned long __addr;           \
-        __addr = 0xa8000000;            \
-        __asm__ __volatile__(           \
-                "icbi   %0\n\t"         \
-                : /* no output */       \
-                : "m" (__m(__addr)));   \
-}
-#endif
-
-/*
- * A brief note on ctrl_barrier(), the control register write barrier.
- *
- * Legacy SH cores typically require a sequence of 8 nops after
- * modification of a control register in order for the changes to take
- * effect. On newer cores (like the sh4a and sh5) this is accomplished
- * with icbi.
- *
- * Also note that on sh4a in the icbi case we can forego a synco for the
- * write barrier, as it's not necessary for control registers.
- *
- * Historically we have only done this type of barrier for the MMUCR, but
- * it's also necessary for the CCR, so we make it generic here instead.
- */
-#if defined(CONFIG_CPU_SH4A) || defined(CONFIG_CPU_SH5)
-#define mb()            __asm__ __volatile__ ("synco": : :"memory")
-#define rmb()           mb()
-#define wmb()           __asm__ __volatile__ ("synco": : :"memory")
-#define ctrl_barrier()  __icbi()
-#define read_barrier_depends()  do { } while(0)
-#else
-#define mb()            __asm__ __volatile__ ("": : :"memory")
-#define rmb()           mb()
-#define wmb()           __asm__ __volatile__ ("": : :"memory")
-#define ctrl_barrier()  __asm__ __volatile__ ("nop;nop;nop;nop;nop;nop;nop;nop")
-#define read_barrier_depends()  do { } while(0)
-#endif
-
-#ifdef CONFIG_SMP
-#define smp_mb()        mb()
-#define smp_rmb()       rmb()
-#define smp_wmb()       wmb()
-#define smp_read_barrier_depends()      read_barrier_depends()
-#else
-#define smp_mb()        barrier()
-#define smp_rmb()       barrier()
-#define smp_wmb()       barrier()
-#define smp_read_barrier_depends()      do { } while(0)
-#endif
-
-#define set_mb(var, value) do { (void)xchg(&var, value); } while (0)
-
-#ifdef CONFIG_GUSA_RB
-#include <asm/cmpxchg-grb.h>
-#else
-#include <asm/cmpxchg-irq.h>
-#endif
-
-extern void __xchg_called_with_bad_pointer(void);
-
-#define __xchg(ptr, x, size)                            \
-({                                                      \
-        unsigned long __xchg__res;                      \
-        volatile void *__xchg_ptr = (ptr);              \
-        switch (size) {                                 \
-        case 4:                                         \
-                __xchg__res = xchg_u32(__xchg_ptr, x);  \
-                break;                                  \
-        case 1:                                         \
-                __xchg__res = xchg_u8(__xchg_ptr, x);   \
-                break;                                  \
-        default:                                        \
-                __xchg_called_with_bad_pointer();       \
-                __xchg__res = x;                        \
-                break;                                  \
-        }                                               \
-                                                        \
-        __xchg__res;                                    \
-})
-
-#define xchg(ptr,x)     \
-        ((__typeof__(*(ptr)))__xchg((ptr),(unsigned long)(x), sizeof(*(ptr))))
-
-/* This function doesn't exist, so you'll get a linker error
- * if something tries to do an invalid cmpxchg(). */
-extern void __cmpxchg_called_with_bad_pointer(void);
-
-#define __HAVE_ARCH_CMPXCHG 1
-
-static inline unsigned long __cmpxchg(volatile void * ptr, unsigned long old,
-                unsigned long new, int size)
-{
-        switch (size) {
-        case 4:
-                return __cmpxchg_u32(ptr, old, new);
-        }
-        __cmpxchg_called_with_bad_pointer();
-        return old;
-}
-
-#define cmpxchg(ptr,o,n)                                                 \
-  ({                                                                     \
-     __typeof__(*(ptr)) _o_ = (o);                                       \
-     __typeof__(*(ptr)) _n_ = (n);                                       \
-     (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_,           \
-                                    (unsigned long)_n_, sizeof(*(ptr))); \
-  })
-
-extern void die(const char *str, struct pt_regs *regs, long err) __attribute__ ((noreturn));
-
-extern void *set_exception_table_vec(unsigned int vec, void *handler);
-
-static inline void *set_exception_table_evt(unsigned int evt, void *handler)
-{
-        return set_exception_table_vec(evt >> 5, handler);
-}
-
-/*
- * SH-2A has both 16 and 32-bit opcodes, do lame encoding checks.
- */
-#ifdef CONFIG_CPU_SH2A
-extern unsigned int instruction_size(unsigned int insn);
-#elif defined(CONFIG_SUPERH32)
-#define instruction_size(insn)  (2)
-#else
-#define instruction_size(insn)  (4)
-#endif
-
-extern unsigned long cached_to_uncached;
-
-extern struct dentry *sh_debugfs_root;
-
-/* XXX
- * disable hlt during certain critical i/o operations
- */
-#define HAVE_DISABLE_HLT
-void disable_hlt(void);
-void enable_hlt(void);
-
-void default_idle(void);
-void per_cpu_trap_init(void);
-
-asmlinkage void break_point_trap(void);
-
-#ifdef CONFIG_SUPERH32
-#define BUILD_TRAP_HANDLER(name)                                        \
-asmlinkage void name##_trap_handler(unsigned long r4, unsigned long r5, \
-                                    unsigned long r6, unsigned long r7, \
-                                    struct pt_regs __regs)
-
-#define TRAP_HANDLER_DECL                               \
-        struct pt_regs *regs = RELOC_HIDE(&__regs, 0);  \
-        unsigned int vec = regs->tra;                   \
-        (void)vec;
-#else
-#define BUILD_TRAP_HANDLER(name)        \
-asmlinkage void name##_trap_handler(unsigned int vec, struct pt_regs *regs)
-#define TRAP_HANDLER_DECL
-#endif
-
-BUILD_TRAP_HANDLER(address_error);
-BUILD_TRAP_HANDLER(debug);
-BUILD_TRAP_HANDLER(bug);
-BUILD_TRAP_HANDLER(fpu_error);
-BUILD_TRAP_HANDLER(fpu_state_restore);
-
-#define arch_align_stack(x) (x)
-
-struct mem_access {
-        unsigned long (*from)(void *dst, const void *src, unsigned long cnt);
-        unsigned long (*to)(void *dst, const void *src, unsigned long cnt);
-};
-
-#ifdef CONFIG_SUPERH32
-# include "system_32.h"
-#else
-# include "system_64.h"
-#endif
-
-#endif
diff --git a/include/asm-sh/thread_info.h b/include/asm-sh/thread_info.h
deleted file mode 100644
index 5131e3907525..000000000000
--- a/include/asm-sh/thread_info.h
+++ /dev/null
@@ -1,139 +0,0 @@
-#ifndef __ASM_SH_THREAD_INFO_H
-#define __ASM_SH_THREAD_INFO_H
-
-/* SuperH version
- * Copyright (C) 2002  Niibe Yutaka
- *
- * The copyright of original i386 version is:
- *
- *  Copyright (C) 2002  David Howells (dhowells@redhat.com)
- *  - Incorporating suggestions made by Linus Torvalds and Dave Miller
- */
-#ifdef __KERNEL__
-#include <asm/page.h>
-
-#ifndef __ASSEMBLY__
-#include <asm/processor.h>
-
-struct thread_info {
-        struct task_struct      *task;          /* main task structure */
-        struct exec_domain      *exec_domain;   /* execution domain */
-        unsigned long           flags;          /* low level flags */
-        __u32                   cpu;
-        int                     preempt_count; /* 0 => preemptable, <0 => BUG */
-        mm_segment_t            addr_limit;     /* thread address space */
-        struct restart_block    restart_block;
-        unsigned long           previous_sp;    /* sp of previous stack in case
-                                                   of nested IRQ stacks */
-        __u8                    supervisor_stack[0];
-};
-
-#endif
-
-#define PREEMPT_ACTIVE          0x10000000
-
-#if defined(CONFIG_4KSTACKS)
-#define THREAD_SIZE_ORDER       (0)
-#elif defined(CONFIG_PAGE_SIZE_4KB)
-#define THREAD_SIZE_ORDER       (1)
-#elif defined(CONFIG_PAGE_SIZE_8KB)
-#define THREAD_SIZE_ORDER       (1)
-#elif defined(CONFIG_PAGE_SIZE_64KB)
-#define THREAD_SIZE_ORDER       (0)
-#else
-#error "Unknown thread size"
-#endif
-
-#define THREAD_SIZE     (PAGE_SIZE << THREAD_SIZE_ORDER)
-#define STACK_WARN      (THREAD_SIZE >> 3)
-
-/*
- * macros/functions for gaining access to the thread information structure
- */
-#ifndef __ASSEMBLY__
-#define INIT_THREAD_INFO(tsk)                   \
-{                                               \
-        .task           = &tsk,                 \
-        .exec_domain    = &default_exec_domain, \
-        .flags          = 0,                    \
-        .cpu            = 0,                    \
-        .preempt_count  = 1,                    \
-        .addr_limit     = KERNEL_DS,            \
-        .restart_block  = {                     \
-                .fn = do_no_restart_syscall,    \
-        },                                      \
-}
-
-#define init_thread_info        (init_thread_union.thread_info)
-#define init_stack              (init_thread_union.stack)
-
-/* how to get the current stack pointer from C */
-register unsigned long current_stack_pointer asm("r15") __used;
-
-/* how to get the thread information struct from C */
-static inline struct thread_info *current_thread_info(void)
-{
-        struct thread_info *ti;
-#if defined(CONFIG_SUPERH64)
-        __asm__ __volatile__ ("getcon   cr17, %0" : "=r" (ti));
-#elif defined(CONFIG_CPU_HAS_SR_RB)
-        __asm__ __volatile__ ("stc      r7_bank, %0" : "=r" (ti));
-#else
-        unsigned long __dummy;
-
-        __asm__ __volatile__ (
-                "mov    r15, %0\n\t"
-                "and    %1, %0\n\t"
-                : "=&r" (ti), "=r" (__dummy)
-                : "1" (~(THREAD_SIZE - 1))
-                : "memory");
-#endif
-
-        return ti;
-}
-
-#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
-
-/* thread information allocation */
-#ifdef CONFIG_DEBUG_STACK_USAGE
-#define alloc_thread_info(ti)   kzalloc(THREAD_SIZE, GFP_KERNEL)
-#else
-#define alloc_thread_info(ti)   kmalloc(THREAD_SIZE, GFP_KERNEL)
-#endif
-#define free_thread_info(ti)    kfree(ti)
-
-#endif /* __ASSEMBLY__ */
-
-/*
- * thread information flags
- * - these are process state flags that various assembly files may need to access
- * - pending work-to-be-done flags are in LSW
- * - other flags in MSW
- */
-#define TIF_SYSCALL_TRACE       0       /* syscall trace active */
-#define TIF_SIGPENDING          1       /* signal pending */
-#define TIF_NEED_RESCHED        2       /* rescheduling necessary */
-#define TIF_RESTORE_SIGMASK     3       /* restore signal mask in do_signal() */
-#define TIF_SINGLESTEP          4       /* singlestepping active */
-#define TIF_SYSCALL_AUDIT       5
-#define TIF_USEDFPU             16      /* FPU was used by this task this quantum (SMP) */
-#define TIF_POLLING_NRFLAG      17      /* true if poll_idle() is polling TIF_NEED_RESCHED */
-#define TIF_MEMDIE              18
-#define TIF_FREEZE              19
-
-#define _TIF_SYSCALL_TRACE      (1<<TIF_SYSCALL_TRACE)
-#define _TIF_SIGPENDING         (1<<TIF_SIGPENDING)
-#define _TIF_NEED_RESCHED       (1<<TIF_NEED_RESCHED)
-#define _TIF_RESTORE_SIGMASK    (1<<TIF_RESTORE_SIGMASK)
-#define _TIF_SINGLESTEP         (1<<TIF_SINGLESTEP)
-#define _TIF_SYSCALL_AUDIT              (1<<TIF_SYSCALL_AUDIT)
-#define _TIF_USEDFPU            (1<<TIF_USEDFPU)
-#define _TIF_POLLING_NRFLAG     (1<<TIF_POLLING_NRFLAG)
-#define _TIF_FREEZE             (1<<TIF_FREEZE)
-
-#define _TIF_WORK_MASK          0x000000FE      /* work to do on interrupt/exception return */
-#define _TIF_ALLWORK_MASK       0x000000FF      /* work to do on any return to u-space */
-
-#endif /* __KERNEL__ */
-
-#endif /* __ASM_SH_THREAD_INFO_H */
diff --git a/include/asm-sh/timer.h b/include/asm-sh/timer.h
deleted file mode 100644
index 701ba84c7049..000000000000
--- a/include/asm-sh/timer.h
+++ /dev/null
@@ -1,45 +0,0 @@
-#ifndef __ASM_SH_TIMER_H
-#define __ASM_SH_TIMER_H
-
-#include <linux/sysdev.h>
-#include <linux/clocksource.h>
-#include <asm/cpu/timer.h>
-
-struct sys_timer_ops {
-        int (*init)(void);
-        int (*start)(void);
-        int (*stop)(void);
-        cycle_t (*read)(void);
-#ifndef CONFIG_GENERIC_TIME
-        unsigned long (*get_offset)(void);
-#endif
-};
-
-struct sys_timer {
-        const char              *name;
-
-        struct sys_device       dev;
-        struct sys_timer_ops    *ops;
-};
-
-#define TICK_SIZE (tick_nsec / 1000)
-
-extern struct sys_timer tmu_timer, cmt_timer, mtu2_timer;
-extern struct sys_timer *sys_timer;
-
-#ifndef CONFIG_GENERIC_TIME
-static inline unsigned long get_timer_offset(void)
-{
-        return sys_timer->ops->get_offset();
-}
-#endif
-
-/* arch/sh/kernel/timers/timer.c */
-struct sys_timer *get_sys_timer(void);
-
-/* arch/sh/kernel/time.c */
-void handle_timer_tick(void);
-extern unsigned long sh_hpt_frequency;
-extern struct clocksource clocksource_sh;
-
-#endif /* __ASM_SH_TIMER_H */
diff --git a/include/asm-sh/uaccess.h b/include/asm-sh/uaccess.h
deleted file mode 100644
index b3440c305b5d..000000000000
--- a/include/asm-sh/uaccess.h
+++ /dev/null
@@ -1,34 +0,0 @@
-#ifndef __ASM_SH_UACCESS_H
-#define __ASM_SH_UACCESS_H
-
-#ifdef CONFIG_SUPERH32
-# include "uaccess_32.h"
-#else
-# include "uaccess_64.h"
-#endif
-
-static inline unsigned long
-copy_from_user(void *to, const void __user *from, unsigned long n)
-{
-        unsigned long __copy_from = (unsigned long) from;
-        __kernel_size_t __copy_size = (__kernel_size_t) n;
-
-        if (__copy_size && __access_ok(__copy_from, __copy_size))
-                return __copy_user(to, from, __copy_size);
-
-        return __copy_size;
-}
-
-static inline unsigned long
-copy_to_user(void __user *to, const void *from, unsigned long n)
-{
-        unsigned long __copy_to = (unsigned long) to;
-        __kernel_size_t __copy_size = (__kernel_size_t) n;
-
-        if (__copy_size && __access_ok(__copy_to, __copy_size))
-                return __copy_user(to, from, __copy_size);
-
-        return __copy_size;
-}
-
-#endif /* __ASM_SH_UACCESS_H */
diff --git a/include/asm-sh/uaccess_32.h b/include/asm-sh/uaccess_32.h
deleted file mode 100644
index 1e41fda74bd3..000000000000
--- a/include/asm-sh/uaccess_32.h
+++ /dev/null
@@ -1,489 +0,0 @@
-/* $Id: uaccess.h,v 1.11 2003/10/13 07:21:20 lethal Exp $
- *
- * User space memory access functions
- *
- * Copyright (C) 1999, 2002  Niibe Yutaka
- * Copyright (C) 2003  Paul Mundt
- *
- *  Based on:
- *     MIPS implementation version 1.15 by
- *              Copyright (C) 1996, 1997, 1998 by Ralf Baechle
- *     and i386 version.
- */
-#ifndef __ASM_SH_UACCESS_32_H
-#define __ASM_SH_UACCESS_32_H
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-
-#define VERIFY_READ    0
-#define VERIFY_WRITE   1
-
-/*
- * The fs value determines whether argument validity checking should be
- * performed or not.  If get_fs() == USER_DS, checking is performed, with
- * get_fs() == KERNEL_DS, checking is bypassed.
- *
- * For historical reasons (Data Segment Register?), these macros are misnamed.
- */
-
-#define MAKE_MM_SEG(s)  ((mm_segment_t) { (s) })
-
-#define KERNEL_DS       MAKE_MM_SEG(0xFFFFFFFFUL)
-#define USER_DS         MAKE_MM_SEG(PAGE_OFFSET)
-
-#define segment_eq(a,b) ((a).seg == (b).seg)
-
-#define get_ds()        (KERNEL_DS)
-
-#if !defined(CONFIG_MMU)
-/* NOMMU is always true */
-#define __addr_ok(addr) (1)
-
-static inline mm_segment_t get_fs(void)
-{
-        return USER_DS;
-}
-
-static inline void set_fs(mm_segment_t s)
-{
-}
-
-/*
- * __access_ok: Check if address with size is OK or not.
- *
- * If we don't have an MMU (or if its disabled) the only thing we really have
- * to look out for is if the address resides somewhere outside of what
- * available RAM we have.
- */
-static inline int __access_ok(unsigned long addr, unsigned long size)
-{
-        return 1;
-}
-#else /* CONFIG_MMU */
-#define __addr_ok(addr) \
-        ((unsigned long)(addr) < (current_thread_info()->addr_limit.seg))
-
-#define get_fs()        (current_thread_info()->addr_limit)
-#define set_fs(x)       (current_thread_info()->addr_limit = (x))
-
-/*
- * __access_ok: Check if address with size is OK or not.
- *
- * Uhhuh, this needs 33-bit arithmetic. We have a carry..
- *
- * sum := addr + size;  carry? --> flag = true;
- * if (sum >= addr_limit) flag = true;
- */
-static inline int __access_ok(unsigned long addr, unsigned long size)
-{
-        unsigned long flag, sum;
-
-        __asm__("clrt\n\t"
-                "addc   %3, %1\n\t"
-                "movt   %0\n\t"
-                "cmp/hi %4, %1\n\t"
-                "rotcl  %0"
-                :"=&r" (flag), "=r" (sum)
-                :"1" (addr), "r" (size),
-                 "r" (current_thread_info()->addr_limit.seg)
-                :"t");
-        return flag == 0;
-}
-#endif /* CONFIG_MMU */
-
-#define access_ok(type, addr, size)     \
-        (__chk_user_ptr(addr),          \
-         __access_ok((unsigned long __force)(addr), (size)))
-
-/*
- * Uh, these should become the main single-value transfer routines ...
- * They automatically use the right size if we just have the right
- * pointer type ...
- *
- * As SuperH uses the same address space for kernel and user data, we
- * can just do these as direct assignments.
- *
- * Careful to not
- * (a) re-use the arguments for side effects (sizeof is ok)
- * (b) require any knowledge of processes at this stage
- */
-#define put_user(x,ptr)         __put_user_check((x), (ptr), sizeof(*(ptr)))
-#define get_user(x,ptr)         __get_user_check((x), (ptr), sizeof(*(ptr)))
-
-/*
- * The "__xxx" versions do not do address space checking, useful when
- * doing multiple accesses to the same area (the user has to do the
- * checks by hand with "access_ok()")
- */
-#define __put_user(x,ptr)       __put_user_nocheck((x), (ptr), sizeof(*(ptr)))
-#define __get_user(x,ptr)       __get_user_nocheck((x), (ptr), sizeof(*(ptr)))
-
-struct __large_struct { unsigned long buf[100]; };
-#define __m(x) (*(struct __large_struct __user *)(x))
-
-#define __get_user_size(x,ptr,size,retval)                      \
-do {                                                            \
-        retval = 0;                                             \
-        switch (size) {                                         \
-        case 1:                                                 \
-                __get_user_asm(x, ptr, retval, "b");            \
-                break;                                          \
-        case 2:                                                 \
-                __get_user_asm(x, ptr, retval, "w");            \
-                break;                                          \
-        case 4:                                                 \
-                __get_user_asm(x, ptr, retval, "l");            \
-                break;                                          \
-        default:                                                \
-                __get_user_unknown();                           \
-                break;                                          \
-        }                                                       \
-} while (0)
-
-#define __get_user_nocheck(x,ptr,size)                          \
-({                                                              \
-        long __gu_err;                                          \
-        unsigned long __gu_val;                                 \
-        const __typeof__(*(ptr)) __user *__gu_addr = (ptr);     \
-        __chk_user_ptr(ptr);                                    \
-        __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \
-        (x) = (__typeof__(*(ptr)))__gu_val;                     \
-        __gu_err;                                               \
-})
-
-#define __get_user_check(x,ptr,size)                                    \
-({                                                                      \
-        long __gu_err = -EFAULT;                                        \
-        unsigned long __gu_val = 0;                                     \
-        const __typeof__(*(ptr)) *__gu_addr = (ptr);                    \
-        if (likely(access_ok(VERIFY_READ, __gu_addr, (size))))          \
-                __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \
-        (x) = (__typeof__(*(ptr)))__gu_val;                             \
-        __gu_err;                                                       \
-})
-
-#define __get_user_asm(x, addr, err, insn) \
-({ \
-__asm__ __volatile__( \
-        "1:\n\t" \
-        "mov." insn "   %2, %1\n\t" \
-        "2:\n" \
-        ".section       .fixup,\"ax\"\n" \
-        "3:\n\t" \
-        "mov    #0, %1\n\t" \
-        "mov.l  4f, %0\n\t" \
-        "jmp    @%0\n\t" \
-        " mov   %3, %0\n\t" \
-        ".balign        4\n" \
-        "4:     .long   2b\n\t" \
-        ".previous\n" \
-        ".section       __ex_table,\"a\"\n\t" \
-        ".long  1b, 3b\n\t" \
-        ".previous" \
-        :"=&r" (err), "=&r" (x) \
-        :"m" (__m(addr)), "i" (-EFAULT), "0" (err)); })
-
-extern void __get_user_unknown(void);
-
-#define __put_user_size(x,ptr,size,retval)              \
-do {                                                    \
-        retval = 0;                                     \
-        switch (size) {                                 \
-        case 1:                                         \
-                __put_user_asm(x, ptr, retval, "b");    \
-                break;                                  \
-        case 2:                                         \
-                __put_user_asm(x, ptr, retval, "w");    \
-                break;                                  \
-        case 4:                                         \
-                __put_user_asm(x, ptr, retval, "l");    \
-                break;                                  \
-        case 8:                                         \
-                __put_user_u64(x, ptr, retval);         \
-                break;                                  \
-        default:                                        \
-                __put_user_unknown();                   \
-        }                                               \
-} while (0)
-
-#define __put_user_nocheck(x,ptr,size)                          \
-({                                                              \
-        long __pu_err;                                          \
-        __typeof__(*(ptr)) __user *__pu_addr = (ptr);           \
-        __chk_user_ptr(ptr);                                    \
-        __put_user_size((x), __pu_addr, (size), __pu_err);      \
-        __pu_err;                                               \
-})
-
-#define __put_user_check(x,ptr,size)                            \
-({                                                              \
-        long __pu_err = -EFAULT;                                \
-        __typeof__(*(ptr)) __user *__pu_addr = (ptr);           \
-        if (likely(access_ok(VERIFY_WRITE, __pu_addr, size)))   \
-                __put_user_size((x), __pu_addr, (size),         \
-                                __pu_err);                      \
-        __pu_err;                                               \
-})
-
-#define __put_user_asm(x, addr, err, insn) \
-({ \
-__asm__ __volatile__( \
-        "1:\n\t" \
-        "mov." insn "   %1, %2\n\t" \
-        "2:\n" \
-        ".section       .fixup,\"ax\"\n" \
-        "3:\n\t" \
-        "mov.l  4f, %0\n\t" \
-        "jmp    @%0\n\t" \
-        " mov   %3, %0\n\t" \
-        ".balign        4\n" \
-        "4:     .long   2b\n\t" \
-        ".previous\n" \
-        ".section       __ex_table,\"a\"\n\t" \
-        ".long  1b, 3b\n\t" \
-        ".previous" \
-        :"=&r" (err) \
-        :"r" (x), "m" (__m(addr)), "i" (-EFAULT), "0" (err)     \
-        :"memory"); })
-
-#if defined(CONFIG_CPU_LITTLE_ENDIAN)
-#define __put_user_u64(val,addr,retval) \
-({ \
-__asm__ __volatile__( \
-        "1:\n\t" \
-        "mov.l  %R1,%2\n\t" \
-        "mov.l  %S1,%T2\n\t" \
-        "2:\n" \
-        ".section       .fixup,\"ax\"\n" \
-        "3:\n\t" \
-        "mov.l  4f,%0\n\t" \
-        "jmp    @%0\n\t" \
-        " mov   %3,%0\n\t" \
-        ".balign        4\n" \
-        "4:     .long   2b\n\t" \
-        ".previous\n" \
-        ".section       __ex_table,\"a\"\n\t" \
-        ".long  1b, 3b\n\t" \
-        ".previous" \
-        : "=r" (retval) \
-        : "r" (val), "m" (__m(addr)), "i" (-EFAULT), "0" (retval) \
-        : "memory"); })
-#else
-#define __put_user_u64(val,addr,retval) \
-({ \
-__asm__ __volatile__( \
-        "1:\n\t" \
-        "mov.l  %S1,%2\n\t" \
-        "mov.l  %R1,%T2\n\t" \
-        "2:\n" \
-        ".section       .fixup,\"ax\"\n" \
-        "3:\n\t" \
-        "mov.l  4f,%0\n\t" \
-        "jmp    @%0\n\t" \
-        " mov   %3,%0\n\t" \
-        ".balign        4\n" \
-        "4:     .long   2b\n\t" \
-        ".previous\n" \
-        ".section       __ex_table,\"a\"\n\t" \
-        ".long  1b, 3b\n\t" \
-        ".previous" \
-        : "=r" (retval) \
-        : "r" (val), "m" (__m(addr)), "i" (-EFAULT), "0" (retval) \
-        : "memory"); })
-#endif
-
-extern void __put_user_unknown(void);
-
-/* Generic arbitrary sized copy.  */
-/* Return the number of bytes NOT copied */
-__kernel_size_t __copy_user(void *to, const void *from, __kernel_size_t n);
-
-
-static __always_inline unsigned long
-__copy_from_user(void *to, const void __user *from, unsigned long n)
-{
-        return __copy_user(to, (__force void *)from, n);
-}
-
-static __always_inline unsigned long __must_check
-__copy_to_user(void __user *to, const void *from, unsigned long n)
-{
-        return __copy_user((__force void *)to, from, n);
-}
-
-#define __copy_to_user_inatomic __copy_to_user
-#define __copy_from_user_inatomic __copy_from_user
-
-/*
- * Clear the area and return remaining number of bytes
- * (on failure.  Usually it's 0.)
- */
-extern __kernel_size_t __clear_user(void *addr, __kernel_size_t size);
-
-#define clear_user(addr,n) ({ \
-void * __cl_addr = (addr); \
-unsigned long __cl_size = (n); \
-if (__cl_size && __access_ok(((unsigned long)(__cl_addr)), __cl_size)) \
-__cl_size = __clear_user(__cl_addr, __cl_size); \
-__cl_size; })
-
-static __inline__ int
-__strncpy_from_user(unsigned long __dest, unsigned long __user __src, int __count)
-{
-        __kernel_size_t res;
-        unsigned long __dummy, _d, _s, _c;
-
-        __asm__ __volatile__(
-                "9:\n"
-                "mov.b  @%2+, %1\n\t"
-                "cmp/eq #0, %1\n\t"
-                "bt/s   2f\n"
-                "1:\n"
-                "mov.b  %1, @%3\n\t"
-                "dt     %4\n\t"
-                "bf/s   9b\n\t"
-                " add   #1, %3\n\t"
-                "2:\n\t"
-                "sub    %4, %0\n"
-                "3:\n"
-                ".section .fixup,\"ax\"\n"
-                "4:\n\t"
-                "mov.l  5f, %1\n\t"
-                "jmp    @%1\n\t"
-                " mov   %9, %0\n\t"
-                ".balign 4\n"
-                "5:     .long 3b\n"
-                ".previous\n"
-                ".section __ex_table,\"a\"\n"
-                "       .balign 4\n"
-                "       .long 9b,4b\n"
-                ".previous"
-                : "=r" (res), "=&z" (__dummy), "=r" (_s), "=r" (_d), "=r"(_c)
-                : "0" (__count), "2" (__src), "3" (__dest), "4" (__count),
-                  "i" (-EFAULT)
-                : "memory", "t");
-
-        return res;
-}
-
-/**
- * strncpy_from_user: - Copy a NUL terminated string from userspace.
- * @dst:   Destination address, in kernel space.  This buffer must be at
- *         least @count bytes long.
- * @src:   Source address, in user space.
- * @count: Maximum number of bytes to copy, including the trailing NUL.
- *
- * Copies a NUL-terminated string from userspace to kernel space.
- *
- * On success, returns the length of the string (not including the trailing
- * NUL).
- *
- * If access to userspace fails, returns -EFAULT (some data may have been
- * copied).
- *
- * If @count is smaller than the length of the string, copies @count bytes
- * and returns @count.
- */
-#define strncpy_from_user(dest,src,count) ({ \
-unsigned long __sfu_src = (unsigned long) (src); \
-int __sfu_count = (int) (count); \
-long __sfu_res = -EFAULT; \
-if(__access_ok(__sfu_src, __sfu_count)) { \
-__sfu_res = __strncpy_from_user((unsigned long) (dest), __sfu_src, __sfu_count); \
-} __sfu_res; })
-
-/*
- * Return the size of a string (including the ending 0 even when we have
- * exceeded the maximum string length).
- */
-static __inline__ long __strnlen_user(const char __user *__s, long __n)
-{
-        unsigned long res;
-        unsigned long __dummy;
-
-        __asm__ __volatile__(
-                "1:\t"
-                "mov.b  @(%0,%3), %1\n\t"
-                "cmp/eq %4, %0\n\t"
-                "bt/s   2f\n\t"
-                " add   #1, %0\n\t"
-                "tst    %1, %1\n\t"
-                "bf     1b\n\t"
-                "2:\n"
-                ".section .fixup,\"ax\"\n"
-                "3:\n\t"
-                "mov.l  4f, %1\n\t"
-                "jmp    @%1\n\t"
-                " mov   #0, %0\n"
-                ".balign 4\n"
-                "4:     .long 2b\n"
-                ".previous\n"
-                ".section __ex_table,\"a\"\n"
-                "       .balign 4\n"
-                "       .long 1b,3b\n"
-                ".previous"
-                : "=z" (res), "=&r" (__dummy)
-                : "0" (0), "r" (__s), "r" (__n)
-                : "t");
-        return res;
-}
-
-/**
- * strnlen_user: - Get the size of a string in user space.
- * @s: The string to measure.
- * @n: The maximum valid length
- *
- * Context: User context only.  This function may sleep.
- *
- * Get the size of a NUL-terminated string in user space.
- *
- * Returns the size of the string INCLUDING the terminating NUL.
- * On exception, returns 0.
- * If the string is too long, returns a value greater than @n.
- */
-static __inline__ long strnlen_user(const char __user *s, long n)
-{
-        if (!__addr_ok(s))
-                return 0;
-        else
-                return __strnlen_user(s, n);
-}
-
-/**
- * strlen_user: - Get the size of a string in user space.
- * @str: The string to measure.
- *
- * Context: User context only.  This function may sleep.
- *
- * Get the size of a NUL-terminated string in user space.
- *
- * Returns the size of the string INCLUDING the terminating NUL.
- * On exception, returns 0.
- *
- * If there is a limit on the length of a valid string, you may wish to
- * consider using strnlen_user() instead.
- */
-#define strlen_user(str)        strnlen_user(str, ~0UL >> 1)
-
-/*
- * The exception table consists of pairs of addresses: the first is the
- * address of an instruction that is allowed to fault, and the second is
- * the address at which the program should continue.  No registers are
- * modified, so it is entirely up to the continuation code to figure out
- * what to do.
- *
- * All the routines below use bits of fixup code that are out of line
- * with the main instruction path.  This means when everything is well,
- * we don't even have to jump over them.  Further, they do not intrude
- * on our cache or tlb entries.
- */
-
-struct exception_table_entry
-{
-        unsigned long insn, fixup;
-};
-
-extern int fixup_exception(struct pt_regs *regs);
-
-#endif /* __ASM_SH_UACCESS_32_H */
diff --git a/include/asm-sh/uaccess_64.h b/include/asm-sh/uaccess_64.h
deleted file mode 100644
index a9b68d094844..000000000000
--- a/include/asm-sh/uaccess_64.h
+++ /dev/null
@@ -1,285 +0,0 @@
-#ifndef __ASM_SH_UACCESS_64_H
-#define __ASM_SH_UACCESS_64_H
-
-/*
- * include/asm-sh/uaccess_64.h
- *
- * Copyright (C) 2000, 2001  Paolo Alberelli
- * Copyright (C) 2003, 2004  Paul Mundt
- *
- * User space memory access functions
- *
- * Copyright (C) 1999  Niibe Yutaka
- *
- *  Based on:
- *     MIPS implementation version 1.15 by
- *              Copyright (C) 1996, 1997, 1998 by Ralf Baechle
- *     and i386 version.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/errno.h>
-#include <linux/sched.h>
-
-#define VERIFY_READ    0
-#define VERIFY_WRITE   1
-
-/*
- * The fs value determines whether argument validity checking should be
- * performed or not.  If get_fs() == USER_DS, checking is performed, with
- * get_fs() == KERNEL_DS, checking is bypassed.
- *
- * For historical reasons (Data Segment Register?), these macros are misnamed.
- */
-
-#define MAKE_MM_SEG(s)  ((mm_segment_t) { (s) })
-
-#define KERNEL_DS       MAKE_MM_SEG(0xFFFFFFFF)
-#define USER_DS         MAKE_MM_SEG(0x80000000)
-
-#define get_ds()        (KERNEL_DS)
-#define get_fs()        (current_thread_info()->addr_limit)
-#define set_fs(x)       (current_thread_info()->addr_limit=(x))
-
-#define segment_eq(a,b) ((a).seg == (b).seg)
-
-#define __addr_ok(addr) ((unsigned long)(addr) < (current_thread_info()->addr_limit.seg))
-
-/*
- * Uhhuh, this needs 33-bit arithmetic. We have a carry..
- *
- * sum := addr + size;  carry? --> flag = true;
- * if (sum >= addr_limit) flag = true;
- */
-#define __range_ok(addr,size) (((unsigned long) (addr) + (size) < (current_thread_info()->addr_limit.seg)) ? 0 : 1)
-
-#define access_ok(type,addr,size) (__range_ok(addr,size) == 0)
-#define __access_ok(addr,size) (__range_ok(addr,size) == 0)
-
-/*
- * Uh, these should become the main single-value transfer routines ...
- * They automatically use the right size if we just have the right
- * pointer type ...
- *
- * As MIPS uses the same address space for kernel and user data, we
- * can just do these as direct assignments.
- *
- * Careful to not
- * (a) re-use the arguments for side effects (sizeof is ok)
- * (b) require any knowledge of processes at this stage
- */
-#define put_user(x,ptr) __put_user_check((x),(ptr),sizeof(*(ptr)))
-#define get_user(x,ptr) __get_user_check((x),(ptr),sizeof(*(ptr)))
-
-/*
- * The "__xxx" versions do not do address space checking, useful when
- * doing multiple accesses to the same area (the user has to do the
- * checks by hand with "access_ok()")
- */
-#define __put_user(x,ptr) __put_user_nocheck((x),(ptr),sizeof(*(ptr)))
-#define __get_user(x,ptr) __get_user_nocheck((x),(ptr),sizeof(*(ptr)))
-
-/*
- * The "xxx_ret" versions return constant specified in third argument, if
- * something bad happens. These macros can be optimized for the
- * case of just returning from the function xxx_ret is used.
- */
-
-#define put_user_ret(x,ptr,ret) ({ \
-if (put_user(x,ptr)) return ret; })
-
-#define get_user_ret(x,ptr,ret) ({ \
-if (get_user(x,ptr)) return ret; })
-
-#define __put_user_ret(x,ptr,ret) ({ \
-if (__put_user(x,ptr)) return ret; })
-
-#define __get_user_ret(x,ptr,ret) ({ \
-if (__get_user(x,ptr)) return ret; })
-
-struct __large_struct { unsigned long buf[100]; };
-#define __m(x) (*(struct __large_struct *)(x))
-
-#define __get_user_size(x,ptr,size,retval)                      \
-do {                                                            \
-        retval = 0;                                             \
-        switch (size) {                                         \
-        case 1:                                                 \
-                retval = __get_user_asm_b(x, ptr);              \
-                break;                                          \
-        case 2:                                                 \
-                retval = __get_user_asm_w(x, ptr);              \
-                break;                                          \
-        case 4:                                                 \
-                retval = __get_user_asm_l(x, ptr);              \
-                break;                                          \
-        case 8:                                                 \
-                retval = __get_user_asm_q(x, ptr);              \
-                break;                                          \
-        default:                                                \
-                __get_user_unknown();                           \
-                break;                                          \
-        }                                                       \
-} while (0)
-
-#define __get_user_nocheck(x,ptr,size)                          \
-({                                                              \
-        long __gu_err, __gu_val;                                \
-        __get_user_size((void *)&__gu_val, (long)(ptr),         \
-                        (size), __gu_err);                      \
-        (x) = (__typeof__(*(ptr)))__gu_val;                     \
-        __gu_err;                                               \
-})
-
-#define __get_user_check(x,ptr,size)                            \
-({                                                              \
-        long __gu_addr = (long)(ptr);                           \
-        long __gu_err = -EFAULT, __gu_val;                      \
-        if (__access_ok(__gu_addr, (size)))                     \
-                __get_user_size((void *)&__gu_val, __gu_addr,   \
-                                (size), __gu_err);              \
-        (x) = (__typeof__(*(ptr))) __gu_val;                    \
-        __gu_err;                                               \
-})
-
-extern long __get_user_asm_b(void *, long);
-extern long __get_user_asm_w(void *, long);
-extern long __get_user_asm_l(void *, long);
-extern long __get_user_asm_q(void *, long);
-extern void __get_user_unknown(void);
-
-#define __put_user_size(x,ptr,size,retval)                      \
-do {                                                            \
-        retval = 0;                                             \
-        switch (size) {                                         \
-        case 1:                                                 \
-                retval = __put_user_asm_b(x, ptr);              \
-                break;                                          \
-        case 2:                                                 \
-                retval = __put_user_asm_w(x, ptr);              \
-                break;                                          \
-        case 4:                                                 \
-                retval = __put_user_asm_l(x, ptr);              \
-                break;                                          \
-        case 8:                                                 \
-                retval = __put_user_asm_q(x, ptr);              \
-                break;                                          \
-        default:                                                \
-                __put_user_unknown();                           \
-        }                                                       \
-} while (0)
-
-#define __put_user_nocheck(x,ptr,size)                          \
-({                                                              \
-        long __pu_err;                                          \
-        __typeof__(*(ptr)) __pu_val = (x);                      \
-        __put_user_size((void *)&__pu_val, (long)(ptr), (size), __pu_err); \
-        __pu_err;                                               \
-})
-
-#define __put_user_check(x,ptr,size)                            \
-({                                                              \
-        long __pu_err = -EFAULT;                                \
-        long __pu_addr = (long)(ptr);                           \
-        __typeof__(*(ptr)) __pu_val = (x);                      \
-                                                                \
-        if (__access_ok(__pu_addr, (size)))                     \
-                __put_user_size((void *)&__pu_val, __pu_addr, (size), __pu_err);\
-        __pu_err;                                               \
-})
-
-extern long __put_user_asm_b(void *, long);
-extern long __put_user_asm_w(void *, long);
-extern long __put_user_asm_l(void *, long);
-extern long __put_user_asm_q(void *, long);
-extern void __put_user_unknown(void);
-
-
-/* Generic arbitrary sized copy.  */
-/* Return the number of bytes NOT copied */
-/* XXX: should be such that: 4byte and the rest. */
-extern __kernel_size_t __copy_user(void *__to, const void *__from, __kernel_size_t __n);
-
-#define copy_to_user_ret(to,from,n,retval) ({ \
-if (copy_to_user(to,from,n)) \
-        return retval; \
-})
-
-#define __copy_to_user(to,from,n)               \
-        __copy_user((void *)(to),               \
-                    (void *)(from), n)
-
-#define __copy_to_user_ret(to,from,n,retval) ({ \
-if (__copy_to_user(to,from,n)) \
-        return retval; \
-})
-
-#define copy_from_user_ret(to,from,n,retval) ({ \
-if (copy_from_user(to,from,n)) \
-        return retval; \
-})
-
-#define __copy_from_user(to,from,n)             \
-        __copy_user((void *)(to),               \
-                    (void *)(from), n)
-
-#define __copy_from_user_ret(to,from,n,retval) ({ \
-if (__copy_from_user(to,from,n)) \
-        return retval; \
-})
-
-#define __copy_to_user_inatomic __copy_to_user
-#define __copy_from_user_inatomic __copy_from_user
-
-/* XXX: Not sure it works well..
-   should be such that: 4byte clear and the rest. */
-extern __kernel_size_t __clear_user(void *addr, __kernel_size_t size);
-
-#define clear_user(addr,n) ({ \
-void * __cl_addr = (addr); \
-unsigned long __cl_size = (n); \
-if (__cl_size && __access_ok(((unsigned long)(__cl_addr)), __cl_size)) \
-__cl_size = __clear_user(__cl_addr, __cl_size); \
-__cl_size; })
-
-extern int __strncpy_from_user(unsigned long __dest, unsigned long __src, int __count);
-
-#define strncpy_from_user(dest,src,count) ({ \
-unsigned long __sfu_src = (unsigned long) (src); \
-int __sfu_count = (int) (count); \
-long __sfu_res = -EFAULT; \
-if(__access_ok(__sfu_src, __sfu_count)) { \
-__sfu_res = __strncpy_from_user((unsigned long) (dest), __sfu_src, __sfu_count); \
-} __sfu_res; })
-
-#define strlen_user(str) strnlen_user(str, ~0UL >> 1)
-
-/*
- * Return the size of a string (including the ending 0!)
- */
-extern long __strnlen_user(const char *__s, long __n);
-
-static inline long strnlen_user(const char *s, long n)
-{
-        if (!__addr_ok(s))
-                return 0;
-        else
-                return __strnlen_user(s, n);
-}
-
-struct exception_table_entry
-{
-        unsigned long insn, fixup;
-};
-
-#ifdef CONFIG_MMU
-#define ARCH_HAS_SEARCH_EXTABLE
-#endif
-
-/* Returns 0 if exception not found and fixup.unit otherwise.  */
-extern unsigned long search_exception_table(unsigned long addr);
-extern const struct exception_table_entry *search_exception_tables (unsigned long addr);
-
-#endif /* __ASM_SH_UACCESS_64_H */
diff --git a/include/asm-sh/ubc.h b/include/asm-sh/ubc.h
deleted file mode 100644
index 56f4e30dc49c..000000000000
--- a/include/asm-sh/ubc.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * include/asm-sh/ubc.h
- *
- * Copyright (C) 1999 Niibe Yutaka
- * Copyright (C) 2002, 2003 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_SH_UBC_H
-#define __ASM_SH_UBC_H
-#ifdef __KERNEL__
-
-#include <asm/cpu/ubc.h>
-
-/* User Break Controller */
-#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709)
-#define UBC_TYPE_SH7729 (current_cpu_data.type == CPU_SH7729)
-#else
-#define UBC_TYPE_SH7729 0
-#endif
-
-#define BAMR_ASID               (1 << 2)
-#define BAMR_NONE               0
-#define BAMR_10                 0x1
-#define BAMR_12                 0x2
-#define BAMR_ALL                0x3
-#define BAMR_16                 0x8
-#define BAMR_20                 0x9
-
-#define BBR_INST                (1 << 4)
-#define BBR_DATA                (2 << 4)
-#define BBR_READ                (1 << 2)
-#define BBR_WRITE               (2 << 2)
-#define BBR_BYTE                0x1
-#define BBR_HALF                0x2
-#define BBR_LONG                0x3
-#define BBR_QUAD                (1 << 6)        /* SH7750 */
-#define BBR_CPU                 (1 << 6)        /* SH7709A,SH7729 */
-#define BBR_DMA                 (2 << 6)        /* SH7709A,SH7729 */
-
-#define BRCR_CMFA               (1 << 15)
-#define BRCR_CMFB               (1 << 14)
-#define BRCR_PCTE               (1 << 11)
-#define BRCR_PCBA               (1 << 10)       /* 1: after execution */
-#define BRCR_DBEB               (1 << 7)
-#define BRCR_PCBB               (1 << 6)
-#define BRCR_SEQ                (1 << 3)
-#define BRCR_UBDE               (1 << 0)
-
-#ifndef __ASSEMBLY__
-/* arch/sh/kernel/cpu/ubc.S */
-extern void ubc_sleep(void);
-
-#ifdef CONFIG_UBC_WAKEUP
-extern void ubc_wakeup(void);
-#else
-#define ubc_wakeup()    do { } while (0)
-#endif
-#endif
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_SH_UBC_H */
diff --git a/include/asm-sh/unistd.h b/include/asm-sh/unistd.h
deleted file mode 100644
index 4b21f369c28c..000000000000
--- a/include/asm-sh/unistd.h
+++ /dev/null
@@ -1,5 +0,0 @@
-#ifdef CONFIG_SUPERH32
-# include "unistd_32.h"
-#else
-# include "unistd_64.h"
-#endif
diff --git a/include/asm-sh/unistd_32.h b/include/asm-sh/unistd_32.h
deleted file mode 100644
index 0b07212ec659..000000000000
--- a/include/asm-sh/unistd_32.h
+++ /dev/null
@@ -1,378 +0,0 @@
-#ifndef __ASM_SH_UNISTD_H
-#define __ASM_SH_UNISTD_H
-
-/*
- * Copyright (C) 1999  Niibe Yutaka
- */
-
-/*
- * This file contains the system call numbers.
- */
-
-#define __NR_restart_syscall      0
-#define __NR_exit                 1
-#define __NR_fork                 2
-#define __NR_read                 3
-#define __NR_write                4
-#define __NR_open                 5
-#define __NR_close                6
-#define __NR_waitpid              7
-#define __NR_creat                8
-#define __NR_link                 9
-#define __NR_unlink              10
-#define __NR_execve              11
-#define __NR_chdir               12
-#define __NR_time                13
-#define __NR_mknod               14
-#define __NR_chmod               15
-#define __NR_lchown              16
-#define __NR_break               17
-#define __NR_oldstat             18
-#define __NR_lseek               19
-#define __NR_getpid              20
-#define __NR_mount               21
-#define __NR_umount              22
-#define __NR_setuid              23
-#define __NR_getuid              24
-#define __NR_stime               25
-#define __NR_ptrace              26
-#define __NR_alarm               27
-#define __NR_oldfstat            28
-#define __NR_pause               29
-#define __NR_utime               30
-#define __NR_stty                31
-#define __NR_gtty                32
-#define __NR_access              33
-#define __NR_nice                34
-#define __NR_ftime               35
-#define __NR_sync                36
-#define __NR_kill                37
-#define __NR_rename              38
-#define __NR_mkdir               39
-#define __NR_rmdir               40
-#define __NR_dup                 41
-#define __NR_pipe                42
-#define __NR_times               43
-#define __NR_prof                44
-#define __NR_brk                 45
-#define __NR_setgid              46
-#define __NR_getgid              47
-#define __NR_signal              48
-#define __NR_geteuid             49
-#define __NR_getegid             50
-#define __NR_acct                51
-#define __NR_umount2             52
-#define __NR_lock                53
-#define __NR_ioctl               54
-#define __NR_fcntl               55
-#define __NR_mpx                 56
-#define __NR_setpgid             57
-#define __NR_ulimit              58
-#define __NR_oldolduname         59
-#define __NR_umask               60
-#define __NR_chroot              61
-#define __NR_ustat               62
-#define __NR_dup2                63
-#define __NR_getppid             64
-#define __NR_getpgrp             65
-#define __NR_setsid              66
-#define __NR_sigaction           67
-#define __NR_sgetmask            68
-#define __NR_ssetmask            69
-#define __NR_setreuid            70
-#define __NR_setregid            71
-#define __NR_sigsuspend          72
-#define __NR_sigpending          73
-#define __NR_sethostname         74
-#define __NR_setrlimit           75
-#define __NR_getrlimit           76     /* Back compatible 2Gig limited rlimit */
-#define __NR_getrusage           77
-#define __NR_gettimeofday        78
-#define __NR_settimeofday        79
-#define __NR_getgroups           80
-#define __NR_setgroups           81
-#define __NR_select              82
-#define __NR_symlink             83
-#define __NR_oldlstat            84
-#define __NR_readlink            85
-#define __NR_uselib              86
-#define __NR_swapon              87
-#define __NR_reboot              88
-#define __NR_readdir             89
-#define __NR_mmap                90
-#define __NR_munmap              91
-#define __NR_truncate            92
-#define __NR_ftruncate           93
-#define __NR_fchmod              94
-#define __NR_fchown              95
-#define __NR_getpriority         96
-#define __NR_setpriority         97
-#define __NR_profil              98
-#define __NR_statfs              99
-#define __NR_fstatfs            100
-#define __NR_ioperm             101
-#define __NR_socketcall         102
-#define __NR_syslog             103
-#define __NR_setitimer          104
-#define __NR_getitimer          105
-#define __NR_stat               106
-#define __NR_lstat              107
-#define __NR_fstat              108
-#define __NR_olduname           109
-#define __NR_iopl               110
-#define __NR_vhangup            111
-#define __NR_idle               112
-#define __NR_vm86old            113
-#define __NR_wait4              114
-#define __NR_swapoff            115
-#define __NR_sysinfo            116
-#define __NR_ipc                117
-#define __NR_fsync              118
-#define __NR_sigreturn          119
-#define __NR_clone              120
-#define __NR_setdomainname      121
-#define __NR_uname              122
-#define __NR_modify_ldt         123
-#define __NR_adjtimex           124
-#define __NR_mprotect           125
-#define __NR_sigprocmask        126
-#define __NR_create_module      127
-#define __NR_init_module        128
-#define __NR_delete_module      129
-#define __NR_get_kernel_syms    130
-#define __NR_quotactl           131
-#define __NR_getpgid            132
-#define __NR_fchdir             133
-#define __NR_bdflush            134
-#define __NR_sysfs              135
-#define __NR_personality        136
-#define __NR_afs_syscall        137 /* Syscall for Andrew File System */
-#define __NR_setfsuid           138
-#define __NR_setfsgid           139
-#define __NR__llseek            140
-#define __NR_getdents           141
-#define __NR__newselect         142
-#define __NR_flock              143
-#define __NR_msync              144
-#define __NR_readv              145
-#define __NR_writev             146
-#define __NR_getsid             147
-#define __NR_fdatasync          148
-#define __NR__sysctl            149
-#define __NR_mlock              150
-#define __NR_munlock            151
-#define __NR_mlockall           152
-#define __NR_munlockall         153
-#define __NR_sched_setparam             154
-#define __NR_sched_getparam             155
-#define __NR_sched_setscheduler         156
-#define __NR_sched_getscheduler         157
-#define __NR_sched_yield                158
-#define __NR_sched_get_priority_max     159
-#define __NR_sched_get_priority_min     160
-#define __NR_sched_rr_get_interval      161
-#define __NR_nanosleep          162
-#define __NR_mremap             163
-#define __NR_setresuid          164
-#define __NR_getresuid          165
-#define __NR_vm86               166
-#define __NR_query_module       167
-#define __NR_poll               168
-#define __NR_nfsservctl         169
-#define __NR_setresgid          170
-#define __NR_getresgid          171
-#define __NR_prctl              172
-#define __NR_rt_sigreturn       173
-#define __NR_rt_sigaction       174
-#define __NR_rt_sigprocmask     175
-#define __NR_rt_sigpending      176
-#define __NR_rt_sigtimedwait    177
-#define __NR_rt_sigqueueinfo    178
-#define __NR_rt_sigsuspend      179
-#define __NR_pread64            180
-#define __NR_pwrite64           181
-#define __NR_chown              182
-#define __NR_getcwd             183
-#define __NR_capget             184
-#define __NR_capset             185
-#define __NR_sigaltstack        186
-#define __NR_sendfile           187
-#define __NR_streams1           188     /* some people actually want it */
-#define __NR_streams2           189     /* some people actually want it */
-#define __NR_vfork              190
-#define __NR_ugetrlimit         191     /* SuS compliant getrlimit */
-#define __NR_mmap2              192
-#define __NR_truncate64         193
-#define __NR_ftruncate64        194
-#define __NR_stat64             195
-#define __NR_lstat64            196
-#define __NR_fstat64            197
-#define __NR_lchown32           198
-#define __NR_getuid32           199
-#define __NR_getgid32           200
-#define __NR_geteuid32          201
-#define __NR_getegid32          202
-#define __NR_setreuid32         203
-#define __NR_setregid32         204
-#define __NR_getgroups32        205
-#define __NR_setgroups32        206
-#define __NR_fchown32           207
-#define __NR_setresuid32        208
-#define __NR_getresuid32        209
-#define __NR_setresgid32        210
-#define __NR_getresgid32        211
-#define __NR_chown32            212
-#define __NR_setuid32           213
-#define __NR_setgid32           214
-#define __NR_setfsuid32         215
-#define __NR_setfsgid32         216
-#define __NR_pivot_root         217
-#define __NR_mincore            218
-#define __NR_madvise            219
-#define __NR_getdents64         220
-#define __NR_fcntl64            221
-/* 223 is unused */
-#define __NR_gettid             224
-#define __NR_readahead          225
-#define __NR_setxattr           226
-#define __NR_lsetxattr          227
-#define __NR_fsetxattr          228
-#define __NR_getxattr           229
-#define __NR_lgetxattr          230
-#define __NR_fgetxattr          231
-#define __NR_listxattr          232
-#define __NR_llistxattr         233
-#define __NR_flistxattr         234
-#define __NR_removexattr        235
-#define __NR_lremovexattr       236
-#define __NR_fremovexattr       237
-#define __NR_tkill              238
-#define __NR_sendfile64         239
-#define __NR_futex              240
-#define __NR_sched_setaffinity  241
-#define __NR_sched_getaffinity  242
-#define __NR_set_thread_area    243
-#define __NR_get_thread_area    244
-#define __NR_io_setup           245
-#define __NR_io_destroy         246
-#define __NR_io_getevents       247
-#define __NR_io_submit          248
-#define __NR_io_cancel          249
-#define __NR_fadvise64          250
-
-#define __NR_exit_group         252
-#define __NR_lookup_dcookie     253
-#define __NR_epoll_create       254
-#define __NR_epoll_ctl          255
-#define __NR_epoll_wait         256
-#define __NR_remap_file_pages   257
-#define __NR_set_tid_address    258
-#define __NR_timer_create       259
-#define __NR_timer_settime      (__NR_timer_create+1)
-#define __NR_timer_gettime      (__NR_timer_create+2)
-#define __NR_timer_getoverrun   (__NR_timer_create+3)
-#define __NR_timer_delete       (__NR_timer_create+4)
-#define __NR_clock_settime      (__NR_timer_create+5)
-#define __NR_clock_gettime      (__NR_timer_create+6)
-#define __NR_clock_getres       (__NR_timer_create+7)
-#define __NR_clock_nanosleep    (__NR_timer_create+8)
-#define __NR_statfs64           268
-#define __NR_fstatfs64          269
-#define __NR_tgkill             270
-#define __NR_utimes             271
-#define __NR_fadvise64_64       272
-#define __NR_vserver            273
-#define __NR_mbind              274
-#define __NR_get_mempolicy      275
-#define __NR_set_mempolicy      276
-#define __NR_mq_open            277
-#define __NR_mq_unlink          (__NR_mq_open+1)
-#define __NR_mq_timedsend       (__NR_mq_open+2)
-#define __NR_mq_timedreceive    (__NR_mq_open+3)
-#define __NR_mq_notify          (__NR_mq_open+4)
-#define __NR_mq_getsetattr      (__NR_mq_open+5)
-#define __NR_kexec_load         283
-#define __NR_waitid             284
-#define __NR_add_key            285
-#define __NR_request_key        286
-#define __NR_keyctl             287
-#define __NR_ioprio_set         288
-#define __NR_ioprio_get         289
-#define __NR_inotify_init       290
-#define __NR_inotify_add_watch  291
-#define __NR_inotify_rm_watch   292
-/* 293 is unused */
-#define __NR_migrate_pages      294
-#define __NR_openat             295
-#define __NR_mkdirat            296
-#define __NR_mknodat            297
-#define __NR_fchownat           298
-#define __NR_futimesat          299
-#define __NR_fstatat64          300
-#define __NR_unlinkat           301
-#define __NR_renameat           302
-#define __NR_linkat             303
-#define __NR_symlinkat          304
-#define __NR_readlinkat         305
-#define __NR_fchmodat           306
-#define __NR_faccessat          307
-#define __NR_pselect6           308
-#define __NR_ppoll              309
-#define __NR_unshare            310
-#define __NR_set_robust_list    311
-#define __NR_get_robust_list    312
-#define __NR_splice             313
-#define __NR_sync_file_range    314
-#define __NR_tee                315
-#define __NR_vmsplice           316
-#define __NR_move_pages         317
-#define __NR_getcpu             318
-#define __NR_epoll_pwait        319
-#define __NR_utimensat          320
-#define __NR_signalfd           321
-#define __NR_timerfd_create     322
-#define __NR_eventfd            323
-#define __NR_fallocate          324
-#define __NR_timerfd_settime    325
-#define __NR_timerfd_gettime    326
-
-#define NR_syscalls 327
-
-#ifdef __KERNEL__
-
-#define __ARCH_WANT_IPC_PARSE_VERSION
-#define __ARCH_WANT_OLD_READDIR
-#define __ARCH_WANT_OLD_STAT
-#define __ARCH_WANT_STAT64
-#define __ARCH_WANT_SYS_ALARM
-#define __ARCH_WANT_SYS_GETHOSTNAME
-#define __ARCH_WANT_SYS_PAUSE
-#define __ARCH_WANT_SYS_SGETMASK
-#define __ARCH_WANT_SYS_SIGNAL
-#define __ARCH_WANT_SYS_TIME
-#define __ARCH_WANT_SYS_UTIME
-#define __ARCH_WANT_SYS_WAITPID
-#define __ARCH_WANT_SYS_SOCKETCALL
-#define __ARCH_WANT_SYS_FADVISE64
-#define __ARCH_WANT_SYS_GETPGRP
-#define __ARCH_WANT_SYS_LLSEEK
-#define __ARCH_WANT_SYS_NICE
-#define __ARCH_WANT_SYS_OLD_GETRLIMIT
-#define __ARCH_WANT_SYS_OLDUMOUNT
-#define __ARCH_WANT_SYS_SIGPENDING
-#define __ARCH_WANT_SYS_SIGPROCMASK
-#define __ARCH_WANT_SYS_RT_SIGACTION
-#define __ARCH_WANT_SYS_RT_SIGSUSPEND
-
-/*
- * "Conditional" syscalls
- *
- * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
- * but it doesn't work on all toolchains, so we just do it by hand
- */
-#ifndef cond_syscall
-#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
-#endif
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_SH_UNISTD_H */
diff --git a/include/asm-sh/unistd_64.h b/include/asm-sh/unistd_64.h
deleted file mode 100644
index 9d21eab52427..000000000000
--- a/include/asm-sh/unistd_64.h
+++ /dev/null
@@ -1,417 +0,0 @@
-#ifndef __ASM_SH_UNISTD_64_H
-#define __ASM_SH_UNISTD_64_H
-
-/*
- * include/asm-sh/unistd_64.h
- *
- * This file contains the system call numbers.
- *
- * Copyright (C) 2000, 2001  Paolo Alberelli
- * Copyright (C) 2003 - 2007 Paul Mundt
- * Copyright (C) 2004  Sean McGoogan
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#define __NR_restart_syscall      0
-#define __NR_exit                 1
-#define __NR_fork                 2
-#define __NR_read                 3
-#define __NR_write                4
-#define __NR_open                 5
-#define __NR_close                6
-#define __NR_waitpid              7
-#define __NR_creat                8
-#define __NR_link                 9
-#define __NR_unlink              10
-#define __NR_execve              11
-#define __NR_chdir               12
-#define __NR_time                13
-#define __NR_mknod               14
-#define __NR_chmod               15
-#define __NR_lchown              16
-#define __NR_break               17
-#define __NR_oldstat             18
-#define __NR_lseek               19
-#define __NR_getpid              20
-#define __NR_mount               21
-#define __NR_umount              22
-#define __NR_setuid              23
-#define __NR_getuid              24
-#define __NR_stime               25
-#define __NR_ptrace              26
-#define __NR_alarm               27
-#define __NR_oldfstat            28
-#define __NR_pause               29
-#define __NR_utime               30
-#define __NR_stty                31
-#define __NR_gtty                32
-#define __NR_access              33
-#define __NR_nice                34
-#define __NR_ftime               35
-#define __NR_sync                36
-#define __NR_kill                37
-#define __NR_rename              38
-#define __NR_mkdir               39
-#define __NR_rmdir               40
-#define __NR_dup                 41
-#define __NR_pipe                42
-#define __NR_times               43
-#define __NR_prof                44
-#define __NR_brk                 45
-#define __NR_setgid              46
-#define __NR_getgid              47
-#define __NR_signal              48
-#define __NR_geteuid             49
-#define __NR_getegid             50
-#define __NR_acct                51
-#define __NR_umount2             52
-#define __NR_lock                53
-#define __NR_ioctl               54
-#define __NR_fcntl               55
-#define __NR_mpx                 56
-#define __NR_setpgid             57
-#define __NR_ulimit              58
-#define __NR_oldolduname         59
-#define __NR_umask               60
-#define __NR_chroot              61
-#define __NR_ustat               62
-#define __NR_dup2                63
-#define __NR_getppid             64
-#define __NR_getpgrp             65
-#define __NR_setsid              66
-#define __NR_sigaction           67
-#define __NR_sgetmask            68
-#define __NR_ssetmask            69
-#define __NR_setreuid            70
-#define __NR_setregid            71
-#define __NR_sigsuspend          72
-#define __NR_sigpending          73
-#define __NR_sethostname         74
-#define __NR_setrlimit           75
-#define __NR_getrlimit           76     /* Back compatible 2Gig limited rlimit */
-#define __NR_getrusage           77
-#define __NR_gettimeofday        78
-#define __NR_settimeofday        79
-#define __NR_getgroups           80
-#define __NR_setgroups           81
-#define __NR_select              82
-#define __NR_symlink             83
-#define __NR_oldlstat            84
-#define __NR_readlink            85
-#define __NR_uselib              86
-#define __NR_swapon              87
-#define __NR_reboot              88
-#define __NR_readdir             89
-#define __NR_mmap                90
-#define __NR_munmap              91
-#define __NR_truncate            92
-#define __NR_ftruncate           93
-#define __NR_fchmod              94
-#define __NR_fchown              95
-#define __NR_getpriority         96
-#define __NR_setpriority         97
-#define __NR_profil              98
-#define __NR_statfs              99
-#define __NR_fstatfs            100
-#define __NR_ioperm             101
-#define __NR_socketcall         102     /* old implementation of socket systemcall */
-#define __NR_syslog             103
-#define __NR_setitimer          104
-#define __NR_getitimer          105
-#define __NR_stat               106
-#define __NR_lstat              107
-#define __NR_fstat              108
-#define __NR_olduname           109
-#define __NR_iopl               110
-#define __NR_vhangup            111
-#define __NR_idle               112
-#define __NR_vm86old            113
-#define __NR_wait4              114
-#define __NR_swapoff            115
-#define __NR_sysinfo            116
-#define __NR_ipc                117
-#define __NR_fsync              118
-#define __NR_sigreturn          119
-#define __NR_clone              120
-#define __NR_setdomainname      121
-#define __NR_uname              122
-#define __NR_modify_ldt         123
-#define __NR_adjtimex           124
-#define __NR_mprotect           125
-#define __NR_sigprocmask        126
-#define __NR_create_module      127
-#define __NR_init_module        128
-#define __NR_delete_module      129
-#define __NR_get_kernel_syms    130
-#define __NR_quotactl           131
-#define __NR_getpgid            132
-#define __NR_fchdir             133
-#define __NR_bdflush            134
-#define __NR_sysfs              135
-#define __NR_personality        136
-#define __NR_afs_syscall        137 /* Syscall for Andrew File System */
-#define __NR_setfsuid           138
-#define __NR_setfsgid           139
-#define __NR__llseek            140
-#define __NR_getdents           141
-#define __NR__newselect         142
-#define __NR_flock              143
-#define __NR_msync              144
-#define __NR_readv              145
-#define __NR_writev             146
-#define __NR_getsid             147
-#define __NR_fdatasync          148
-#define __NR__sysctl            149
-#define __NR_mlock              150
-#define __NR_munlock            151
-#define __NR_mlockall           152
-#define __NR_munlockall         153
-#define __NR_sched_setparam             154
-#define __NR_sched_getparam             155
-#define __NR_sched_setscheduler         156
-#define __NR_sched_getscheduler         157
-#define __NR_sched_yield                158
-#define __NR_sched_get_priority_max     159
-#define __NR_sched_get_priority_min     160
-#define __NR_sched_rr_get_interval      161
-#define __NR_nanosleep          162
-#define __NR_mremap             163
-#define __NR_setresuid          164
-#define __NR_getresuid          165
-#define __NR_vm86               166
-#define __NR_query_module       167
-#define __NR_poll               168
-#define __NR_nfsservctl         169
-#define __NR_setresgid          170
-#define __NR_getresgid          171
-#define __NR_prctl              172
-#define __NR_rt_sigreturn       173
-#define __NR_rt_sigaction       174
-#define __NR_rt_sigprocmask     175
-#define __NR_rt_sigpending      176
-#define __NR_rt_sigtimedwait    177
-#define __NR_rt_sigqueueinfo    178
-#define __NR_rt_sigsuspend      179
-#define __NR_pread64            180
-#define __NR_pwrite64           181
-#define __NR_chown              182
-#define __NR_getcwd             183
-#define __NR_capget             184
-#define __NR_capset             185
-#define __NR_sigaltstack        186
-#define __NR_sendfile           187
-#define __NR_streams1           188     /* some people actually want it */
-#define __NR_streams2           189     /* some people actually want it */
-#define __NR_vfork              190
-#define __NR_ugetrlimit         191     /* SuS compliant getrlimit */
-#define __NR_mmap2              192
-#define __NR_truncate64         193
-#define __NR_ftruncate64        194
-#define __NR_stat64             195
-#define __NR_lstat64            196
-#define __NR_fstat64            197
-#define __NR_lchown32           198
-#define __NR_getuid32           199
-#define __NR_getgid32           200
-#define __NR_geteuid32          201
-#define __NR_getegid32          202
-#define __NR_setreuid32         203
-#define __NR_setregid32         204
-#define __NR_getgroups32        205
-#define __NR_setgroups32        206
-#define __NR_fchown32           207
-#define __NR_setresuid32        208
-#define __NR_getresuid32        209
-#define __NR_setresgid32        210
-#define __NR_getresgid32        211
-#define __NR_chown32            212
-#define __NR_setuid32           213
-#define __NR_setgid32           214
-#define __NR_setfsuid32         215
-#define __NR_setfsgid32         216
-#define __NR_pivot_root         217
-#define __NR_mincore            218
-#define __NR_madvise            219
-
-/* Non-multiplexed socket family */
-#define __NR_socket             220
-#define __NR_bind               221
-#define __NR_connect            222
-#define __NR_listen             223
-#define __NR_accept             224
-#define __NR_getsockname        225
-#define __NR_getpeername        226
-#define __NR_socketpair         227
-#define __NR_send               228
-#define __NR_sendto             229
-#define __NR_recv               230
-#define __NR_recvfrom           231
-#define __NR_shutdown           232
-#define __NR_setsockopt         233
-#define __NR_getsockopt         234
-#define __NR_sendmsg            235
-#define __NR_recvmsg            236
-
-/* Non-multiplexed IPC family */
-#define __NR_semop              237
-#define __NR_semget             238
-#define __NR_semctl             239
-#define __NR_msgsnd             240
-#define __NR_msgrcv             241
-#define __NR_msgget             242
-#define __NR_msgctl             243
-#if 0
-#define __NR_shmatcall          244
-#endif
-#define __NR_shmdt              245
-#define __NR_shmget             246
-#define __NR_shmctl             247
-
-#define __NR_getdents64         248
-#define __NR_fcntl64            249
-/* 223 is unused */
-#define __NR_gettid             252
-#define __NR_readahead          253
-#define __NR_setxattr           254
-#define __NR_lsetxattr          255
-#define __NR_fsetxattr          256
-#define __NR_getxattr           257
-#define __NR_lgetxattr          258
-#define __NR_fgetxattr          269
-#define __NR_listxattr          260
-#define __NR_llistxattr         261
-#define __NR_flistxattr         262
-#define __NR_removexattr        263
-#define __NR_lremovexattr       264
-#define __NR_fremovexattr       265
-#define __NR_tkill              266
-#define __NR_sendfile64         267
-#define __NR_futex              268
-#define __NR_sched_setaffinity  269
-#define __NR_sched_getaffinity  270
-#define __NR_set_thread_area    271
-#define __NR_get_thread_area    272
-#define __NR_io_setup           273
-#define __NR_io_destroy         274
-#define __NR_io_getevents       275
-#define __NR_io_submit          276
-#define __NR_io_cancel          277
-#define __NR_fadvise64          278
-#define __NR_exit_group         280
-
-#define __NR_lookup_dcookie     281
-#define __NR_epoll_create       282
-#define __NR_epoll_ctl          283
-#define __NR_epoll_wait         284
-#define __NR_remap_file_pages   285
-#define __NR_set_tid_address    286
-#define __NR_timer_create       287
-#define __NR_timer_settime      (__NR_timer_create+1)
-#define __NR_timer_gettime      (__NR_timer_create+2)
-#define __NR_timer_getoverrun   (__NR_timer_create+3)
-#define __NR_timer_delete       (__NR_timer_create+4)
-#define __NR_clock_settime      (__NR_timer_create+5)
-#define __NR_clock_gettime      (__NR_timer_create+6)
-#define __NR_clock_getres       (__NR_timer_create+7)
-#define __NR_clock_nanosleep    (__NR_timer_create+8)
-#define __NR_statfs64           296
-#define __NR_fstatfs64          297
-#define __NR_tgkill             298
-#define __NR_utimes             299
-#define __NR_fadvise64_64       300
-#define __NR_vserver            301
-#define __NR_mbind              302
-#define __NR_get_mempolicy      303
-#define __NR_set_mempolicy      304
-#define __NR_mq_open            305
-#define __NR_mq_unlink          (__NR_mq_open+1)
-#define __NR_mq_timedsend       (__NR_mq_open+2)
-#define __NR_mq_timedreceive    (__NR_mq_open+3)
-#define __NR_mq_notify          (__NR_mq_open+4)
-#define __NR_mq_getsetattr      (__NR_mq_open+5)
-#define __NR_kexec_load         311
-#define __NR_waitid             312
-#define __NR_add_key            313
-#define __NR_request_key        314
-#define __NR_keyctl             315
-#define __NR_ioprio_set         316
-#define __NR_ioprio_get         317
-#define __NR_inotify_init       318
-#define __NR_inotify_add_watch  319
-#define __NR_inotify_rm_watch   320
-/* 321 is unused */
-#define __NR_migrate_pages      322
-#define __NR_openat             323
-#define __NR_mkdirat            324
-#define __NR_mknodat            325
-#define __NR_fchownat           326
-#define __NR_futimesat          327
-#define __NR_fstatat64          328
-#define __NR_unlinkat           329
-#define __NR_renameat           330
-#define __NR_linkat             331
-#define __NR_symlinkat          332
-#define __NR_readlinkat         333
-#define __NR_fchmodat           334
-#define __NR_faccessat          335
-#define __NR_pselect6           336
-#define __NR_ppoll              337
-#define __NR_unshare            338
-#define __NR_set_robust_list    339
-#define __NR_get_robust_list    340
-#define __NR_splice             341
-#define __NR_sync_file_range    342
-#define __NR_tee                343
-#define __NR_vmsplice           344
-#define __NR_move_pages         345
-#define __NR_getcpu             346
-#define __NR_epoll_pwait        347
-#define __NR_utimensat          348
-#define __NR_signalfd           349
-#define __NR_timerfd_create     350
-#define __NR_eventfd            351
-#define __NR_fallocate          352
-#define __NR_timerfd_settime    353
-#define __NR_timerfd_gettime    354
-
-#ifdef __KERNEL__
-
-#define NR_syscalls 353
-
-#define __ARCH_WANT_IPC_PARSE_VERSION
-#define __ARCH_WANT_OLD_READDIR
-#define __ARCH_WANT_OLD_STAT
-#define __ARCH_WANT_STAT64
-#define __ARCH_WANT_SYS_ALARM
-#define __ARCH_WANT_SYS_GETHOSTNAME
-#define __ARCH_WANT_SYS_PAUSE
-#define __ARCH_WANT_SYS_SGETMASK
-#define __ARCH_WANT_SYS_SIGNAL
-#define __ARCH_WANT_SYS_TIME
-#define __ARCH_WANT_SYS_UTIME
-#define __ARCH_WANT_SYS_WAITPID
-#define __ARCH_WANT_SYS_SOCKETCALL
-#define __ARCH_WANT_SYS_FADVISE64
-#define __ARCH_WANT_SYS_GETPGRP
-#define __ARCH_WANT_SYS_LLSEEK
-#define __ARCH_WANT_SYS_NICE
-#define __ARCH_WANT_SYS_OLD_GETRLIMIT
-#define __ARCH_WANT_SYS_OLDUMOUNT
-#define __ARCH_WANT_SYS_SIGPENDING
-#define __ARCH_WANT_SYS_SIGPROCMASK
-#define __ARCH_WANT_SYS_RT_SIGACTION
-
-/*
- * "Conditional" syscalls
- *
- * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
- * but it doesn't work on all toolchains, so we just do it by hand
- */
-#ifndef cond_syscall
-#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
-#endif
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_SH_UNISTD_64_H */
diff --git a/include/asm-sh/watchdog.h b/include/asm-sh/watchdog.h
deleted file mode 100644
index d19ea62ef8c6..000000000000
--- a/include/asm-sh/watchdog.h
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- * include/asm-sh/watchdog.h
- *
- * Copyright (C) 2002, 2003 Paul Mundt
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-#ifndef __ASM_SH_WATCHDOG_H
-#define __ASM_SH_WATCHDOG_H
-#ifdef __KERNEL__
-
-#include <linux/types.h>
-#include <asm/cpu/watchdog.h>
-#include <asm/io.h>
-
-/* 
- * See asm/cpu-sh2/watchdog.h for explanation of this stupidity..
- */
-#ifndef WTCNT_R
-#  define WTCNT_R       WTCNT
-#endif
-
-#ifndef WTCSR_R
-#  define WTCSR_R       WTCSR
-#endif
-
-#define WTCNT_HIGH      0x5a
-#define WTCSR_HIGH      0xa5
-
-#define WTCSR_CKS2      0x04
-#define WTCSR_CKS1      0x02
-#define WTCSR_CKS0      0x01
-
-/*
- * CKS0-2 supports a number of clock division ratios. At the time the watchdog
- * is enabled, it defaults to a 41 usec overflow period .. we overload this to
- * something a little more reasonable, and really can't deal with anything
- * lower than WTCSR_CKS_1024, else we drop back into the usec range.
- *
- * Clock Division Ratio         Overflow Period
- * --------------------------------------------
- *     1/32 (initial value)       41 usecs
- *     1/64                       82 usecs
- *     1/128                     164 usecs
- *     1/256                     328 usecs
- *     1/512                     656 usecs
- *     1/1024                   1.31 msecs
- *     1/2048                   2.62 msecs
- *     1/4096                   5.25 msecs
- */
-#define WTCSR_CKS_32    0x00
-#define WTCSR_CKS_64    0x01
-#define WTCSR_CKS_128   0x02
-#define WTCSR_CKS_256   0x03
-#define WTCSR_CKS_512   0x04
-#define WTCSR_CKS_1024  0x05
-#define WTCSR_CKS_2048  0x06
-#define WTCSR_CKS_4096  0x07
-
-/**
- *      sh_wdt_read_cnt - Read from Counter
- *      Reads back the WTCNT value.
- */
-static inline __u8 sh_wdt_read_cnt(void)
-{
-        return ctrl_inb(WTCNT_R);
-}
-
-/**
- *      sh_wdt_write_cnt - Write to Counter
- *      @val: Value to write
- *
- *      Writes the given value @val to the lower byte of the timer counter.
- *      The upper byte is set manually on each write.
- */
-static inline void sh_wdt_write_cnt(__u8 val)
-{
-        ctrl_outw((WTCNT_HIGH << 8) | (__u16)val, WTCNT);
-}
-
-/**
- *      sh_wdt_read_csr - Read from Control/Status Register
- *
- *      Reads back the WTCSR value.
- */
-static inline __u8 sh_wdt_read_csr(void)
-{
-        return ctrl_inb(WTCSR_R);
-}
-
-/**
- *      sh_wdt_write_csr - Write to Control/Status Register
- *      @val: Value to write
- *
- *      Writes the given value @val to the lower byte of the control/status
- *      register. The upper byte is set manually on each write.
- */
-static inline void sh_wdt_write_csr(__u8 val)
-{
-        ctrl_outw((WTCSR_HIGH << 8) | (__u16)val, WTCSR);
-}
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_SH_WATCHDOG_H */
diff --git a/include/asm-sparc/Kbuild b/include/asm-sparc/Kbuild
deleted file mode 100644
index 6cdaf9d33b38..000000000000
--- a/include/asm-sparc/Kbuild
+++ /dev/null
@@ -1 +0,0 @@
-# dummy file to avoid breaking make headers_install
diff --git a/include/asm-sparc/atomic.h b/include/asm-sparc/atomic.h
deleted file mode 100644
index 66d8166ec1d7..000000000000
--- a/include/asm-sparc/atomic.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_ATOMIC_H
-#define ___ASM_SPARC_ATOMIC_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/atomic_64.h>
-#else
-#include <asm-sparc/atomic_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/auxio.h b/include/asm-sparc/auxio.h
deleted file mode 100644
index 24c6f3c0f577..000000000000
--- a/include/asm-sparc/auxio.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_AUXIO_H
-#define ___ASM_SPARC_AUXIO_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/auxio_64.h>
-#else
-#include <asm-sparc/auxio_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/auxio_32.h b/include/asm-sparc/auxio_32.h
deleted file mode 100644
index 4db8f23db20f..000000000000
--- a/include/asm-sparc/auxio_32.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * auxio.h:  Definitions and code for the Auxiliary I/O register.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- */
-#ifndef _SPARC_AUXIO_H
-#define _SPARC_AUXIO_H
-
-#include <asm/system.h>
-#include <asm/vaddrs.h>
-
-/* This register is an unsigned char in IO space.  It does two things.
- * First, it is used to control the front panel LED light on machines
- * that have it (good for testing entry points to trap handlers and irq's)
- * Secondly, it controls various floppy drive parameters.
- */
-#define AUXIO_ORMEIN      0xf0    /* All writes must set these bits. */
-#define AUXIO_ORMEIN4M    0xc0    /* sun4m - All writes must set these bits. */
-#define AUXIO_FLPY_DENS   0x20    /* Floppy density, high if set. Read only. */
-#define AUXIO_FLPY_DCHG   0x10    /* A disk change occurred.  Read only. */
-#define AUXIO_EDGE_ON     0x10    /* sun4m - On means Jumper block is in. */
-#define AUXIO_FLPY_DSEL   0x08    /* Drive select/start-motor. Write only. */
-#define AUXIO_LINK_TEST   0x08    /* sun4m - On means TPE Carrier detect. */
-
-/* Set the following to one, then zero, after doing a pseudo DMA transfer. */
-#define AUXIO_FLPY_TCNT   0x04    /* Floppy terminal count. Write only. */
-
-/* Set the following to zero to eject the floppy. */
-#define AUXIO_FLPY_EJCT   0x02    /* Eject floppy disk.  Write only. */
-#define AUXIO_LED         0x01    /* On if set, off if unset. Read/Write */
-
-#ifndef __ASSEMBLY__
-
-/*
- * NOTE: these routines are implementation dependent--
- * understand the hardware you are querying!
- */
-extern void set_auxio(unsigned char bits_on, unsigned char bits_off);
-extern unsigned char get_auxio(void); /* .../asm-sparc/floppy.h */
-
-/*
- * The following routines are provided for driver-compatibility
- * with sparc64 (primarily sunlance.c)
- */
-
-#define AUXIO_LTE_ON    1
-#define AUXIO_LTE_OFF   0
-
-/* auxio_set_lte - Set Link Test Enable (TPE Link Detect)
- *
- * on - AUXIO_LTE_ON or AUXIO_LTE_OFF
- */
-#define auxio_set_lte(on) \
-do { \
-        if(on) { \
-                set_auxio(AUXIO_LINK_TEST, 0); \
-        } else { \
-                set_auxio(0, AUXIO_LINK_TEST); \
-        } \
-} while (0)
-
-#define AUXIO_LED_ON    1
-#define AUXIO_LED_OFF   0
-
-/* auxio_set_led - Set system front panel LED
- *
- * on - AUXIO_LED_ON or AUXIO_LED_OFF
- */
-#define auxio_set_led(on) \
-do { \
-        if(on) { \
-                set_auxio(AUXIO_LED, 0); \
-        } else { \
-                set_auxio(0, AUXIO_LED); \
-        } \
-} while (0)
-
-#endif /* !(__ASSEMBLY__) */
-
-
-/* AUXIO2 (Power Off Control) */
-extern __volatile__ unsigned char * auxio_power_register;
-
-#define AUXIO_POWER_DETECT_FAILURE      32
-#define AUXIO_POWER_CLEAR_FAILURE       2
-#define AUXIO_POWER_OFF                 1
-
-
-#endif /* !(_SPARC_AUXIO_H) */
diff --git a/include/asm-sparc/bitops.h b/include/asm-sparc/bitops.h
deleted file mode 100644
index 1a2949d0193f..000000000000
--- a/include/asm-sparc/bitops.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_BITOPS_H
-#define ___ASM_SPARC_BITOPS_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/bitops_64.h>
-#else
-#include <asm-sparc/bitops_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/btfixup.h b/include/asm-sparc/btfixup.h
deleted file mode 100644
index 08277e6fb4cd..000000000000
--- a/include/asm-sparc/btfixup.h
+++ /dev/null
@@ -1,208 +0,0 @@
-/*
- *  asm-sparc/btfixup.h:    Macros for boot time linking.
- *
- *  Copyright (C) 1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
- */
- 
-#ifndef _SPARC_BTFIXUP_H
-#define _SPARC_BTFIXUP_H
-
-#include <linux/init.h>
-
-#ifndef __ASSEMBLY__
-
-#ifdef MODULE
-extern unsigned int ___illegal_use_of_BTFIXUP_SIMM13_in_module(void);
-extern unsigned int ___illegal_use_of_BTFIXUP_SETHI_in_module(void);
-extern unsigned int ___illegal_use_of_BTFIXUP_HALF_in_module(void);
-extern unsigned int ___illegal_use_of_BTFIXUP_INT_in_module(void);
-
-#define BTFIXUP_SIMM13(__name) ___illegal_use_of_BTFIXUP_SIMM13_in_module()
-#define BTFIXUP_HALF(__name) ___illegal_use_of_BTFIXUP_HALF_in_module()
-#define BTFIXUP_SETHI(__name) ___illegal_use_of_BTFIXUP_SETHI_in_module()
-#define BTFIXUP_INT(__name) ___illegal_use_of_BTFIXUP_INT_in_module()
-#define BTFIXUP_BLACKBOX(__name) ___illegal_use_of_BTFIXUP_BLACKBOX_in_module
-
-#else
-
-#define BTFIXUP_SIMM13(__name) ___sf_##__name()
-#define BTFIXUP_HALF(__name) ___af_##__name()
-#define BTFIXUP_SETHI(__name) ___hf_##__name()
-#define BTFIXUP_INT(__name) ((unsigned int)&___i_##__name)
-/* This must be written in assembly and present in a sethi */
-#define BTFIXUP_BLACKBOX(__name) ___b_##__name
-#endif /* MODULE */
-
-/* Fixup call xx */
-
-#define BTFIXUPDEF_CALL(__type, __name, __args...)                                      \
-        extern __type ___f_##__name(__args);                                            \
-        extern unsigned ___fs_##__name[3];
-#define BTFIXUPDEF_CALL_CONST(__type, __name, __args...)                                \
-        extern __type ___f_##__name(__args) __attribute_const__;                        \
-        extern unsigned ___fs_##__name[3];
-#define BTFIXUP_CALL(__name) ___f_##__name
-
-#define BTFIXUPDEF_BLACKBOX(__name)                                                     \
-        extern unsigned ___bs_##__name[2];
-
-/* Put bottom 13bits into some register variable */
-
-#define BTFIXUPDEF_SIMM13(__name)                                                       \
-        static inline unsigned int ___sf_##__name(void) __attribute_const__;            \
-        extern unsigned ___ss_##__name[2];                                              \
-        static inline unsigned int ___sf_##__name(void) {                               \
-                unsigned int ret;                                                       \
-                __asm__ ("or %%g0, ___s_" #__name ", %0" : "=r"(ret));                  \
-                return ret;                                                             \
-        }
-#define BTFIXUPDEF_SIMM13_INIT(__name,__val)                                            \
-        static inline unsigned int ___sf_##__name(void) __attribute_const__;            \
-        extern unsigned ___ss_##__name[2];                                              \
-        static inline unsigned int ___sf_##__name(void) {                               \
-                unsigned int ret;                                                       \
-                __asm__ ("or %%g0, ___s_" #__name "__btset_" #__val ", %0" : "=r"(ret));\
-                return ret;                                                             \
-        }
-
-/* Put either bottom 13 bits, or upper 22 bits into some register variable
- * (depending on the value, this will lead into sethi FIX, reg; or
- * mov FIX, reg; )
- */
-
-#define BTFIXUPDEF_HALF(__name)                                                         \
-        static inline unsigned int ___af_##__name(void) __attribute_const__;            \
-        extern unsigned ___as_##__name[2];                                              \
-        static inline unsigned int ___af_##__name(void) {                               \
-                unsigned int ret;                                                       \
-                __asm__ ("or %%g0, ___a_" #__name ", %0" : "=r"(ret));                  \
-                return ret;                                                             \
-        }
-#define BTFIXUPDEF_HALF_INIT(__name,__val)                                              \
-        static inline unsigned int ___af_##__name(void) __attribute_const__;            \
-        extern unsigned ___as_##__name[2];                                              \
-        static inline unsigned int ___af_##__name(void) {                               \
-                unsigned int ret;                                                       \
-                __asm__ ("or %%g0, ___a_" #__name "__btset_" #__val ", %0" : "=r"(ret));\
-                return ret;                                                             \
-        }
-
-/* Put upper 22 bits into some register variable */
-
-#define BTFIXUPDEF_SETHI(__name)                                                        \
-        static inline unsigned int ___hf_##__name(void) __attribute_const__;            \
-        extern unsigned ___hs_##__name[2];                                              \
-        static inline unsigned int ___hf_##__name(void) {                               \
-                unsigned int ret;                                                       \
-                __asm__ ("sethi %%hi(___h_" #__name "), %0" : "=r"(ret));               \
-                return ret;                                                             \
-        }
-#define BTFIXUPDEF_SETHI_INIT(__name,__val)                                             \
-        static inline unsigned int ___hf_##__name(void) __attribute_const__;            \
-        extern unsigned ___hs_##__name[2];                                              \
-        static inline unsigned int ___hf_##__name(void) {                               \
-                unsigned int ret;                                                       \
-                __asm__ ("sethi %%hi(___h_" #__name "__btset_" #__val "), %0" :         \
-                         "=r"(ret));                                                    \
-                return ret;                                                             \
-        }
-
-/* Put a full 32bit integer into some register variable */
-
-#define BTFIXUPDEF_INT(__name)                                                          \
-        extern unsigned char ___i_##__name;                                             \
-        extern unsigned ___is_##__name[2];
-
-#define BTFIXUPCALL_NORM        0x00000000                      /* Always call */
-#define BTFIXUPCALL_NOP         0x01000000                      /* Possibly optimize to nop */
-#define BTFIXUPCALL_RETINT(i)   (0x90102000|((i) & 0x1fff))     /* Possibly optimize to mov i, %o0 */
-#define BTFIXUPCALL_ORINT(i)    (0x90122000|((i) & 0x1fff))     /* Possibly optimize to or %o0, i, %o0 */
-#define BTFIXUPCALL_RETO0       0x01000000                      /* Return first parameter, actually a nop */
-#define BTFIXUPCALL_ANDNINT(i)  (0x902a2000|((i) & 0x1fff))     /* Possibly optimize to andn %o0, i, %o0 */
-#define BTFIXUPCALL_SWAPO0O1    0xd27a0000                      /* Possibly optimize to swap [%o0],%o1 */
-#define BTFIXUPCALL_SWAPO0G0    0xc07a0000                      /* Possibly optimize to swap [%o0],%g0 */
-#define BTFIXUPCALL_SWAPG1G2    0xc4784000                      /* Possibly optimize to swap [%g1],%g2 */
-#define BTFIXUPCALL_STG0O0      0xc0220000                      /* Possibly optimize to st %g0,[%o0] */
-#define BTFIXUPCALL_STO1O0      0xd2220000                      /* Possibly optimize to st %o1,[%o0] */
-
-#define BTFIXUPSET_CALL(__name, __addr, __insn)                                         \
-        do {                                                                            \
-                ___fs_##__name[0] |= 1;                                                 \
-                ___fs_##__name[1] = (unsigned long)__addr;                              \
-                ___fs_##__name[2] = __insn;                                             \
-        } while (0)
-        
-#define BTFIXUPSET_BLACKBOX(__name, __func)                                             \
-        do {                                                                            \
-                ___bs_##__name[0] |= 1;                                                 \
-                ___bs_##__name[1] = (unsigned long)__func;                              \
-        } while (0)
-        
-#define BTFIXUPCOPY_CALL(__name, __from)                                                \
-        do {                                                                            \
-                ___fs_##__name[0] |= 1;                                                 \
-                ___fs_##__name[1] = ___fs_##__from[1];                                  \
-                ___fs_##__name[2] = ___fs_##__from[2];                                  \
-        } while (0)
-                
-#define BTFIXUPSET_SIMM13(__name, __val)                                                \
-        do {                                                                            \
-                ___ss_##__name[0] |= 1;                                                 \
-                ___ss_##__name[1] = (unsigned)__val;                                    \
-        } while (0)
-        
-#define BTFIXUPCOPY_SIMM13(__name, __from)                                              \
-        do {                                                                            \
-                ___ss_##__name[0] |= 1;                                                 \
-                ___ss_##__name[1] = ___ss_##__from[1];                                  \
-        } while (0)
-                
-#define BTFIXUPSET_HALF(__name, __val)                                                  \
-        do {                                                                            \
-                ___as_##__name[0] |= 1;                                                 \
-                ___as_##__name[1] = (unsigned)__val;                                    \
-        } while (0)
-        
-#define BTFIXUPCOPY_HALF(__name, __from)                                                \
-        do {                                                                            \
-                ___as_##__name[0] |= 1;                                                 \
-                ___as_##__name[1] = ___as_##__from[1];                                  \
-        } while (0)
-                
-#define BTFIXUPSET_SETHI(__name, __val)                                                 \
-        do {                                                                            \
-                ___hs_##__name[0] |= 1;                                                 \
-                ___hs_##__name[1] = (unsigned)__val;                                    \
-        } while (0)
-        
-#define BTFIXUPCOPY_SETHI(__name, __from)                                               \
-        do {                                                                            \
-                ___hs_##__name[0] |= 1;                                                 \
-                ___hs_##__name[1] = ___hs_##__from[1];                                  \
-        } while (0)
-                
-#define BTFIXUPSET_INT(__name, __val)                                                   \
-        do {                                                                            \
-                ___is_##__name[0] |= 1;                                                 \
-                ___is_##__name[1] = (unsigned)__val;                                    \
-        } while (0)
-        
-#define BTFIXUPCOPY_INT(__name, __from)                                                 \
-        do {                                                                            \
-                ___is_##__name[0] |= 1;                                                 \
-                ___is_##__name[1] = ___is_##__from[1];                                  \
-        } while (0)
-        
-#define BTFIXUPVAL_CALL(__name)                                                         \
-        ((unsigned long)___fs_##__name[1])
-        
-extern void btfixup(void);
-
-#else /* __ASSEMBLY__ */
-
-#define BTFIXUP_SETHI(__name)                   %hi(___h_ ## __name)
-#define BTFIXUP_SETHI_INIT(__name,__val)        %hi(___h_ ## __name ## __btset_ ## __val)
-
-#endif /* __ASSEMBLY__ */
-        
-#endif /* !(_SPARC_BTFIXUP_H) */
diff --git a/include/asm-sparc/bugs.h b/include/asm-sparc/bugs.h
deleted file mode 100644
index 2dfc07bc8e54..000000000000
--- a/include/asm-sparc/bugs.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* include/asm-sparc/bugs.h:  Sparc probes for various bugs.
- *
- * Copyright (C) 1996, 2007 David S. Miller (davem@davemloft.net)
- */
-
-#ifdef CONFIG_SPARC32
-#include <asm/cpudata.h>
-#endif
-
-#ifdef CONFIG_SPARC64
-#include <asm/sstate.h>
-#endif
-
-extern unsigned long loops_per_jiffy;
-
-static void __init check_bugs(void)
-{
-#if defined(CONFIG_SPARC32) && !defined(CONFIG_SMP)
-        cpu_data(0).udelay_val = loops_per_jiffy;
-#endif
-#ifdef CONFIG_SPARC64
-        sstate_running();
-#endif
-}
diff --git a/include/asm-sparc/cacheflush.h b/include/asm-sparc/cacheflush.h
deleted file mode 100644
index 2b6a37957c2d..000000000000
--- a/include/asm-sparc/cacheflush.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_CACHEFLUSH_H
-#define ___ASM_SPARC_CACHEFLUSH_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/cacheflush_64.h>
-#else
-#include <asm-sparc/cacheflush_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/checksum.h b/include/asm-sparc/checksum.h
deleted file mode 100644
index 4e3553d4f6e1..000000000000
--- a/include/asm-sparc/checksum.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_CHECKSUM_H
-#define ___ASM_SPARC_CHECKSUM_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/checksum_64.h>
-#else
-#include <asm-sparc/checksum_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/cpudata.h b/include/asm-sparc/cpudata.h
deleted file mode 100644
index b76fac0c8d8f..000000000000
--- a/include/asm-sparc/cpudata.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_CPUDATA_H
-#define ___ASM_SPARC_CPUDATA_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/cpudata_64.h>
-#else
-#include <asm-sparc/cpudata_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/cpudata_32.h b/include/asm-sparc/cpudata_32.h
deleted file mode 100644
index a2c4d51d36c4..000000000000
--- a/include/asm-sparc/cpudata_32.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/* cpudata.h: Per-cpu parameters.
- *
- * Copyright (C) 2004 Keith M Wesolowski (wesolows@foobazco.org)
- *
- * Based on include/asm-sparc64/cpudata.h and Linux 2.4 smp.h
- * both (C) David S. Miller.
- */
-
-#ifndef _SPARC_CPUDATA_H
-#define _SPARC_CPUDATA_H
-
-#include <linux/percpu.h>
-
-typedef struct {
-        unsigned long udelay_val;
-        unsigned long clock_tick;
-        unsigned int multiplier;
-        unsigned int counter;
-        int prom_node;
-        int mid;
-        int next;
-} cpuinfo_sparc;
-
-DECLARE_PER_CPU(cpuinfo_sparc, __cpu_data);
-#define cpu_data(__cpu) per_cpu(__cpu_data, (__cpu))
-
-#endif /* _SPARC_CPUDATA_H */
diff --git a/include/asm-sparc/current.h b/include/asm-sparc/current.h
deleted file mode 100644
index 8a1d9d6643b0..000000000000
--- a/include/asm-sparc/current.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/* include/asm-sparc/current.h
- *
- * Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
- * Copyright (C) 2002 Pete Zaitcev (zaitcev@yahoo.com)
- * Copyright (C) 2007 David S. Miller (davem@davemloft.net)
- *
- *  Derived from "include/asm-s390/current.h" by
- *  Martin Schwidefsky (schwidefsky@de.ibm.com)
- *  Derived from "include/asm-i386/current.h"
-*/
-#ifndef _SPARC_CURRENT_H
-#define _SPARC_CURRENT_H
-
-#include <linux/thread_info.h>
-
-#ifdef CONFIG_SPARC64
-register struct task_struct *current asm("g4");
-#endif
-
-#ifdef CONFIG_SPARC32
-/* We might want to consider using %g4 like sparc64 to shave a few cycles.
- *
- * Two stage process (inline + #define) for type-checking.
- * We also obfuscate get_current() to check if anyone used that by mistake.
- */
-struct task_struct;
-static inline struct task_struct *__get_current(void)
-{
-        return current_thread_info()->task;
-}
-#define current __get_current()
-#endif
-
-#endif /* !(_SPARC_CURRENT_H) */
diff --git a/include/asm-sparc/delay.h b/include/asm-sparc/delay.h
deleted file mode 100644
index 6210a3ce9751..000000000000
--- a/include/asm-sparc/delay.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_DELAY_H
-#define ___ASM_SPARC_DELAY_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/delay_64.h>
-#else
-#include <asm-sparc/delay_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/dma-mapping.h b/include/asm-sparc/dma-mapping.h
deleted file mode 100644
index 7483504259ce..000000000000
--- a/include/asm-sparc/dma-mapping.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_DMA_MAPPING_H
-#define ___ASM_SPARC_DMA_MAPPING_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/dma-mapping_64.h>
-#else
-#include <asm-sparc/dma-mapping_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/dma.h b/include/asm-sparc/dma.h
deleted file mode 100644
index 8cc69bfaae2a..000000000000
--- a/include/asm-sparc/dma.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_DMA_H
-#define ___ASM_SPARC_DMA_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/dma_64.h>
-#else
-#include <asm-sparc/dma_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/dma_32.h b/include/asm-sparc/dma_32.h
deleted file mode 100644
index 959d6c8a71ae..000000000000
--- a/include/asm-sparc/dma_32.h
+++ /dev/null
@@ -1,288 +0,0 @@
-/* include/asm-sparc/dma.h
- *
- * Copyright 1995 (C) David S. Miller (davem@davemloft.net)
- */
-
-#ifndef _ASM_SPARC_DMA_H
-#define _ASM_SPARC_DMA_H
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-
-#include <asm/vac-ops.h>  /* for invalidate's, etc. */
-#include <asm/sbus.h>
-#include <asm/delay.h>
-#include <asm/oplib.h>
-#include <asm/system.h>
-#include <asm/io.h>
-#include <linux/spinlock.h>
-
-struct page;
-extern spinlock_t  dma_spin_lock;
-
-static inline unsigned long claim_dma_lock(void)
-{
-        unsigned long flags;
-        spin_lock_irqsave(&dma_spin_lock, flags);
-        return flags;
-}
-
-static inline void release_dma_lock(unsigned long flags)
-{
-        spin_unlock_irqrestore(&dma_spin_lock, flags);
-}
-
-/* These are irrelevant for Sparc DMA, but we leave it in so that
- * things can compile.
- */
-#define MAX_DMA_CHANNELS 8
-#define MAX_DMA_ADDRESS  (~0UL)
-#define DMA_MODE_READ    1
-#define DMA_MODE_WRITE   2
-
-/* Useful constants */
-#define SIZE_16MB      (16*1024*1024)
-#define SIZE_64K       (64*1024)
-
-/* SBUS DMA controller reg offsets */
-#define DMA_CSR         0x00UL          /* rw  DMA control/status register    0x00   */
-#define DMA_ADDR        0x04UL          /* rw  DMA transfer address register  0x04   */
-#define DMA_COUNT       0x08UL          /* rw  DMA transfer count register    0x08   */
-#define DMA_TEST        0x0cUL          /* rw  DMA test/debug register        0x0c   */
-
-/* DVMA chip revisions */
-enum dvma_rev {
-        dvmarev0,
-        dvmaesc1,
-        dvmarev1,
-        dvmarev2,
-        dvmarev3,
-        dvmarevplus,
-        dvmahme
-};
-
-#define DMA_HASCOUNT(rev)  ((rev)==dvmaesc1)
-
-/* Linux DMA information structure, filled during probe. */
-struct sbus_dma {
-        struct sbus_dma *next;
-        struct sbus_dev *sdev;
-        void __iomem *regs;
-
-        /* Status, misc info */
-        int node;                /* Prom node for this DMA device */
-        int running;             /* Are we doing DMA now? */
-        int allocated;           /* Are we "owned" by anyone yet? */
-
-        /* Transfer information. */
-        unsigned long addr;      /* Start address of current transfer */
-        int nbytes;              /* Size of current transfer */
-        int realbytes;           /* For splitting up large transfers, etc. */
-
-        /* DMA revision */
-        enum dvma_rev revision;
-};
-
-extern struct sbus_dma *dma_chain;
-
-/* Broken hardware... */
-#ifdef CONFIG_SUN4
-/* Have to sort this out. Does rev0 work fine on sun4[cmd] without isbroken?
- * Or is rev0 present only on sun4 boxes? -jj */
-#define DMA_ISBROKEN(dma)    ((dma)->revision == dvmarev0 || (dma)->revision == dvmarev1)
-#else
-#define DMA_ISBROKEN(dma)    ((dma)->revision == dvmarev1)
-#endif
-#define DMA_ISESC1(dma)      ((dma)->revision == dvmaesc1)
-
-/* Main routines in dma.c */
-extern void dvma_init(struct sbus_bus *);
-
-/* Fields in the cond_reg register */
-/* First, the version identification bits */
-#define DMA_DEVICE_ID    0xf0000000        /* Device identification bits */
-#define DMA_VERS0        0x00000000        /* Sunray DMA version */
-#define DMA_ESCV1        0x40000000        /* DMA ESC Version 1 */
-#define DMA_VERS1        0x80000000        /* DMA rev 1 */
-#define DMA_VERS2        0xa0000000        /* DMA rev 2 */
-#define DMA_VERHME       0xb0000000        /* DMA hme gate array */
-#define DMA_VERSPLUS     0x90000000        /* DMA rev 1 PLUS */
-
-#define DMA_HNDL_INTR    0x00000001        /* An IRQ needs to be handled */
-#define DMA_HNDL_ERROR   0x00000002        /* We need to take an error */
-#define DMA_FIFO_ISDRAIN 0x0000000c        /* The DMA FIFO is draining */
-#define DMA_INT_ENAB     0x00000010        /* Turn on interrupts */
-#define DMA_FIFO_INV     0x00000020        /* Invalidate the FIFO */
-#define DMA_ACC_SZ_ERR   0x00000040        /* The access size was bad */
-#define DMA_FIFO_STDRAIN 0x00000040        /* DMA_VERS1 Drain the FIFO */
-#define DMA_RST_SCSI     0x00000080        /* Reset the SCSI controller */
-#define DMA_RST_ENET     DMA_RST_SCSI      /* Reset the ENET controller */
-#define DMA_RST_BPP      DMA_RST_SCSI      /* Reset the BPP controller */
-#define DMA_ST_WRITE     0x00000100        /* write from device to memory */
-#define DMA_ENABLE       0x00000200        /* Fire up DMA, handle requests */
-#define DMA_PEND_READ    0x00000400        /* DMA_VERS1/0/PLUS Pending Read */
-#define DMA_ESC_BURST    0x00000800        /* 1=16byte 0=32byte */
-#define DMA_READ_AHEAD   0x00001800        /* DMA read ahead partial longword */
-#define DMA_DSBL_RD_DRN  0x00001000        /* No EC drain on slave reads */
-#define DMA_BCNT_ENAB    0x00002000        /* If on, use the byte counter */
-#define DMA_TERM_CNTR    0x00004000        /* Terminal counter */
-#define DMA_SCSI_SBUS64  0x00008000        /* HME: Enable 64-bit SBUS mode. */
-#define DMA_CSR_DISAB    0x00010000        /* No FIFO drains during csr */
-#define DMA_SCSI_DISAB   0x00020000        /* No FIFO drains during reg */
-#define DMA_DSBL_WR_INV  0x00020000        /* No EC inval. on slave writes */
-#define DMA_ADD_ENABLE   0x00040000        /* Special ESC DVMA optimization */
-#define DMA_E_BURSTS     0x000c0000        /* ENET: SBUS r/w burst mask */
-#define DMA_E_BURST32    0x00040000        /* ENET: SBUS 32 byte r/w burst */
-#define DMA_E_BURST16    0x00000000        /* ENET: SBUS 16 byte r/w burst */
-#define DMA_BRST_SZ      0x000c0000        /* SCSI: SBUS r/w burst size */
-#define DMA_BRST64       0x00080000        /* SCSI: 64byte bursts (HME on UltraSparc only) */
-#define DMA_BRST32       0x00040000        /* SCSI/BPP: 32byte bursts */
-#define DMA_BRST16       0x00000000        /* SCSI/BPP: 16byte bursts */
-#define DMA_BRST0        0x00080000        /* SCSI: no bursts (non-HME gate arrays) */
-#define DMA_ADDR_DISAB   0x00100000        /* No FIFO drains during addr */
-#define DMA_2CLKS        0x00200000        /* Each transfer = 2 clock ticks */
-#define DMA_3CLKS        0x00400000        /* Each transfer = 3 clock ticks */
-#define DMA_EN_ENETAUI   DMA_3CLKS         /* Put lance into AUI-cable mode */
-#define DMA_CNTR_DISAB   0x00800000        /* No IRQ when DMA_TERM_CNTR set */
-#define DMA_AUTO_NADDR   0x01000000        /* Use "auto nxt addr" feature */
-#define DMA_SCSI_ON      0x02000000        /* Enable SCSI dma */
-#define DMA_BPP_ON       DMA_SCSI_ON       /* Enable BPP dma */
-#define DMA_PARITY_OFF   0x02000000        /* HME: disable parity checking */
-#define DMA_LOADED_ADDR  0x04000000        /* Address has been loaded */
-#define DMA_LOADED_NADDR 0x08000000        /* Next address has been loaded */
-#define DMA_RESET_FAS366 0x08000000        /* HME: Assert RESET to FAS366 */
-
-/* Values describing the burst-size property from the PROM */
-#define DMA_BURST1       0x01
-#define DMA_BURST2       0x02
-#define DMA_BURST4       0x04
-#define DMA_BURST8       0x08
-#define DMA_BURST16      0x10
-#define DMA_BURST32      0x20
-#define DMA_BURST64      0x40
-#define DMA_BURSTBITS    0x7f
-
-/* Determine highest possible final transfer address given a base */
-#define DMA_MAXEND(addr) (0x01000000UL-(((unsigned long)(addr))&0x00ffffffUL))
-
-/* Yes, I hack a lot of elisp in my spare time... */
-#define DMA_ERROR_P(regs)  ((((regs)->cond_reg) & DMA_HNDL_ERROR))
-#define DMA_IRQ_P(regs)    ((((regs)->cond_reg) & (DMA_HNDL_INTR | DMA_HNDL_ERROR)))
-#define DMA_WRITE_P(regs)  ((((regs)->cond_reg) & DMA_ST_WRITE))
-#define DMA_OFF(regs)      ((((regs)->cond_reg) &= (~DMA_ENABLE)))
-#define DMA_INTSOFF(regs)  ((((regs)->cond_reg) &= (~DMA_INT_ENAB)))
-#define DMA_INTSON(regs)   ((((regs)->cond_reg) |= (DMA_INT_ENAB)))
-#define DMA_PUNTFIFO(regs) ((((regs)->cond_reg) |= DMA_FIFO_INV))
-#define DMA_SETSTART(regs, addr)  ((((regs)->st_addr) = (char *) addr))
-#define DMA_BEGINDMA_W(regs) \
-        ((((regs)->cond_reg |= (DMA_ST_WRITE|DMA_ENABLE|DMA_INT_ENAB))))
-#define DMA_BEGINDMA_R(regs) \
-        ((((regs)->cond_reg |= ((DMA_ENABLE|DMA_INT_ENAB)&(~DMA_ST_WRITE)))))
-
-/* For certain DMA chips, we need to disable ints upon irq entry
- * and turn them back on when we are done.  So in any ESP interrupt
- * handler you *must* call DMA_IRQ_ENTRY upon entry and DMA_IRQ_EXIT
- * when leaving the handler.  You have been warned...
- */
-#define DMA_IRQ_ENTRY(dma, dregs) do { \
-        if(DMA_ISBROKEN(dma)) DMA_INTSOFF(dregs); \
-   } while (0)
-
-#define DMA_IRQ_EXIT(dma, dregs) do { \
-        if(DMA_ISBROKEN(dma)) DMA_INTSON(dregs); \
-   } while(0)
-
-#if 0   /* P3 this stuff is inline in ledma.c:init_restart_ledma() */
-/* Pause until counter runs out or BIT isn't set in the DMA condition
- * register.
- */
-static inline void sparc_dma_pause(struct sparc_dma_registers *regs,
-                                       unsigned long bit)
-{
-        int ctr = 50000;   /* Let's find some bugs ;) */
-
-        /* Busy wait until the bit is not set any more */
-        while((regs->cond_reg&bit) && (ctr>0)) {
-                ctr--;
-                __delay(5);
-        }
-
-        /* Check for bogus outcome. */
-        if(!ctr)
-                panic("DMA timeout");
-}
-
-/* Reset the friggin' thing... */
-#define DMA_RESET(dma) do { \
-        struct sparc_dma_registers *regs = dma->regs;                      \
-        /* Let the current FIFO drain itself */                            \
-        sparc_dma_pause(regs, (DMA_FIFO_ISDRAIN));                         \
-        /* Reset the logic */                                              \
-        regs->cond_reg |= (DMA_RST_SCSI);     /* assert */                 \
-        __delay(400);                         /* let the bits set ;) */    \
-        regs->cond_reg &= ~(DMA_RST_SCSI);    /* de-assert */              \
-        sparc_dma_enable_interrupts(regs);    /* Re-enable interrupts */   \
-        /* Enable FAST transfers if available */                           \
-        if(dma->revision>dvmarev1) regs->cond_reg |= DMA_3CLKS;            \
-        dma->running = 0;                                                  \
-} while(0)
-#endif
-
-#define for_each_dvma(dma) \
-        for((dma) = dma_chain; (dma); (dma) = (dma)->next)
-
-extern int get_dma_list(char *);
-extern int request_dma(unsigned int, __const__ char *);
-extern void free_dma(unsigned int);
-
-/* From PCI */
-
-#ifdef CONFIG_PCI
-extern int isa_dma_bridge_buggy;
-#else
-#define isa_dma_bridge_buggy    (0)
-#endif
-
-/* Routines for data transfer buffers. */
-BTFIXUPDEF_CALL(char *, mmu_lockarea, char *, unsigned long)
-BTFIXUPDEF_CALL(void,   mmu_unlockarea, char *, unsigned long)
-
-#define mmu_lockarea(vaddr,len) BTFIXUP_CALL(mmu_lockarea)(vaddr,len)
-#define mmu_unlockarea(vaddr,len) BTFIXUP_CALL(mmu_unlockarea)(vaddr,len)
-
-/* These are implementations for sbus_map_sg/sbus_unmap_sg... collapse later */
-BTFIXUPDEF_CALL(__u32, mmu_get_scsi_one, char *, unsigned long, struct sbus_bus *sbus)
-BTFIXUPDEF_CALL(void,  mmu_get_scsi_sgl, struct scatterlist *, int, struct sbus_bus *sbus)
-BTFIXUPDEF_CALL(void,  mmu_release_scsi_one, __u32, unsigned long, struct sbus_bus *sbus)
-BTFIXUPDEF_CALL(void,  mmu_release_scsi_sgl, struct scatterlist *, int, struct sbus_bus *sbus)
-
-#define mmu_get_scsi_one(vaddr,len,sbus) BTFIXUP_CALL(mmu_get_scsi_one)(vaddr,len,sbus)
-#define mmu_get_scsi_sgl(sg,sz,sbus) BTFIXUP_CALL(mmu_get_scsi_sgl)(sg,sz,sbus)
-#define mmu_release_scsi_one(vaddr,len,sbus) BTFIXUP_CALL(mmu_release_scsi_one)(vaddr,len,sbus)
-#define mmu_release_scsi_sgl(sg,sz,sbus) BTFIXUP_CALL(mmu_release_scsi_sgl)(sg,sz,sbus)
-
-/*
- * mmu_map/unmap are provided by iommu/iounit; Invalid to call on IIep.
- *
- * The mmu_map_dma_area establishes two mappings in one go.
- * These mappings point to pages normally mapped at 'va' (linear address).
- * First mapping is for CPU visible address at 'a', uncached.
- * This is an alias, but it works because it is an uncached mapping.
- * Second mapping is for device visible address, or "bus" address.
- * The bus address is returned at '*pba'.
- *
- * These functions seem distinct, but are hard to split. On sun4c,
- * at least for now, 'a' is equal to bus address, and retured in *pba.
- * On sun4m, page attributes depend on the CPU type, so we have to
- * know if we are mapping RAM or I/O, so it has to be an additional argument
- * to a separate mapping function for CPU visible mappings.
- */
-BTFIXUPDEF_CALL(int,  mmu_map_dma_area, dma_addr_t *, unsigned long, unsigned long, int len)
-BTFIXUPDEF_CALL(struct page *, mmu_translate_dvma, unsigned long busa)
-BTFIXUPDEF_CALL(void,  mmu_unmap_dma_area, unsigned long busa, int len)
-
-#define mmu_map_dma_area(pba,va,a,len) BTFIXUP_CALL(mmu_map_dma_area)(pba,va,a,len)
-#define mmu_unmap_dma_area(ba,len) BTFIXUP_CALL(mmu_unmap_dma_area)(ba,len)
-#define mmu_translate_dvma(ba)     BTFIXUP_CALL(mmu_translate_dvma)(ba)
-
-#endif /* !(_ASM_SPARC_DMA_H) */
diff --git a/include/asm-sparc/dma_64.h b/include/asm-sparc/dma_64.h
deleted file mode 100644
index 9d4c024bd3b3..000000000000
--- a/include/asm-sparc/dma_64.h
+++ /dev/null
@@ -1,205 +0,0 @@
-/*
- * include/asm-sparc64/dma.h
- *
- * Copyright 1996 (C) David S. Miller (davem@caip.rutgers.edu)
- */
-
-#ifndef _ASM_SPARC64_DMA_H
-#define _ASM_SPARC64_DMA_H
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/spinlock.h>
-
-#include <asm/sbus.h>
-#include <asm/delay.h>
-#include <asm/oplib.h>
-
-/* These are irrelevant for Sparc DMA, but we leave it in so that
- * things can compile.
- */
-#define MAX_DMA_CHANNELS 8
-#define DMA_MODE_READ    1
-#define DMA_MODE_WRITE   2
-#define MAX_DMA_ADDRESS  (~0UL)
-
-/* Useful constants */
-#define SIZE_16MB      (16*1024*1024)
-#define SIZE_64K       (64*1024)
-
-/* SBUS DMA controller reg offsets */
-#define DMA_CSR         0x00UL          /* rw  DMA control/status register    0x00   */
-#define DMA_ADDR        0x04UL          /* rw  DMA transfer address register  0x04   */
-#define DMA_COUNT       0x08UL          /* rw  DMA transfer count register    0x08   */
-#define DMA_TEST        0x0cUL          /* rw  DMA test/debug register        0x0c   */
-
-/* DVMA chip revisions */
-enum dvma_rev {
-        dvmarev0,
-        dvmaesc1,
-        dvmarev1,
-        dvmarev2,
-        dvmarev3,
-        dvmarevplus,
-        dvmahme
-};
-
-#define DMA_HASCOUNT(rev)  ((rev)==dvmaesc1)
-
-/* Linux DMA information structure, filled during probe. */
-struct sbus_dma {
-        struct sbus_dma *next;
-        struct sbus_dev *sdev;
-        void __iomem *regs;
-
-        /* Status, misc info */
-        int node;                /* Prom node for this DMA device */
-        int running;             /* Are we doing DMA now? */
-        int allocated;           /* Are we "owned" by anyone yet? */
-
-        /* Transfer information. */
-        u32 addr;                /* Start address of current transfer */
-        int nbytes;              /* Size of current transfer */
-        int realbytes;           /* For splitting up large transfers, etc. */
-
-        /* DMA revision */
-        enum dvma_rev revision;
-};
-
-extern struct sbus_dma *dma_chain;
-
-/* Broken hardware... */
-#define DMA_ISBROKEN(dma)    ((dma)->revision == dvmarev1)
-#define DMA_ISESC1(dma)      ((dma)->revision == dvmaesc1)
-
-/* Main routines in dma.c */
-extern void dvma_init(struct sbus_bus *);
-
-/* Fields in the cond_reg register */
-/* First, the version identification bits */
-#define DMA_DEVICE_ID    0xf0000000        /* Device identification bits */
-#define DMA_VERS0        0x00000000        /* Sunray DMA version */
-#define DMA_ESCV1        0x40000000        /* DMA ESC Version 1 */
-#define DMA_VERS1        0x80000000        /* DMA rev 1 */
-#define DMA_VERS2        0xa0000000        /* DMA rev 2 */
-#define DMA_VERHME       0xb0000000        /* DMA hme gate array */
-#define DMA_VERSPLUS     0x90000000        /* DMA rev 1 PLUS */
-
-#define DMA_HNDL_INTR    0x00000001        /* An IRQ needs to be handled */
-#define DMA_HNDL_ERROR   0x00000002        /* We need to take an error */
-#define DMA_FIFO_ISDRAIN 0x0000000c        /* The DMA FIFO is draining */
-#define DMA_INT_ENAB     0x00000010        /* Turn on interrupts */
-#define DMA_FIFO_INV     0x00000020        /* Invalidate the FIFO */
-#define DMA_ACC_SZ_ERR   0x00000040        /* The access size was bad */
-#define DMA_FIFO_STDRAIN 0x00000040        /* DMA_VERS1 Drain the FIFO */
-#define DMA_RST_SCSI     0x00000080        /* Reset the SCSI controller */
-#define DMA_RST_ENET     DMA_RST_SCSI      /* Reset the ENET controller */
-#define DMA_ST_WRITE     0x00000100        /* write from device to memory */
-#define DMA_ENABLE       0x00000200        /* Fire up DMA, handle requests */
-#define DMA_PEND_READ    0x00000400        /* DMA_VERS1/0/PLUS Pending Read */
-#define DMA_ESC_BURST    0x00000800        /* 1=16byte 0=32byte */
-#define DMA_READ_AHEAD   0x00001800        /* DMA read ahead partial longword */
-#define DMA_DSBL_RD_DRN  0x00001000        /* No EC drain on slave reads */
-#define DMA_BCNT_ENAB    0x00002000        /* If on, use the byte counter */
-#define DMA_TERM_CNTR    0x00004000        /* Terminal counter */
-#define DMA_SCSI_SBUS64  0x00008000        /* HME: Enable 64-bit SBUS mode. */
-#define DMA_CSR_DISAB    0x00010000        /* No FIFO drains during csr */
-#define DMA_SCSI_DISAB   0x00020000        /* No FIFO drains during reg */
-#define DMA_DSBL_WR_INV  0x00020000        /* No EC inval. on slave writes */
-#define DMA_ADD_ENABLE   0x00040000        /* Special ESC DVMA optimization */
-#define DMA_E_BURSTS     0x000c0000        /* ENET: SBUS r/w burst mask */
-#define DMA_E_BURST32    0x00040000        /* ENET: SBUS 32 byte r/w burst */
-#define DMA_E_BURST16    0x00000000        /* ENET: SBUS 16 byte r/w burst */
-#define DMA_BRST_SZ      0x000c0000        /* SCSI: SBUS r/w burst size */
-#define DMA_BRST64       0x000c0000        /* SCSI: 64byte bursts (HME on UltraSparc only) */
-#define DMA_BRST32       0x00040000        /* SCSI: 32byte bursts */
-#define DMA_BRST16       0x00000000        /* SCSI: 16byte bursts */
-#define DMA_BRST0        0x00080000        /* SCSI: no bursts (non-HME gate arrays) */
-#define DMA_ADDR_DISAB   0x00100000        /* No FIFO drains during addr */
-#define DMA_2CLKS        0x00200000        /* Each transfer = 2 clock ticks */
-#define DMA_3CLKS        0x00400000        /* Each transfer = 3 clock ticks */
-#define DMA_EN_ENETAUI   DMA_3CLKS         /* Put lance into AUI-cable mode */
-#define DMA_CNTR_DISAB   0x00800000        /* No IRQ when DMA_TERM_CNTR set */
-#define DMA_AUTO_NADDR   0x01000000        /* Use "auto nxt addr" feature */
-#define DMA_SCSI_ON      0x02000000        /* Enable SCSI dma */
-#define DMA_PARITY_OFF   0x02000000        /* HME: disable parity checking */
-#define DMA_LOADED_ADDR  0x04000000        /* Address has been loaded */
-#define DMA_LOADED_NADDR 0x08000000        /* Next address has been loaded */
-#define DMA_RESET_FAS366 0x08000000        /* HME: Assert RESET to FAS366 */
-
-/* Values describing the burst-size property from the PROM */
-#define DMA_BURST1       0x01
-#define DMA_BURST2       0x02
-#define DMA_BURST4       0x04
-#define DMA_BURST8       0x08
-#define DMA_BURST16      0x10
-#define DMA_BURST32      0x20
-#define DMA_BURST64      0x40
-#define DMA_BURSTBITS    0x7f
-
-/* Determine highest possible final transfer address given a base */
-#define DMA_MAXEND(addr) (0x01000000UL-(((unsigned long)(addr))&0x00ffffffUL))
-
-/* Yes, I hack a lot of elisp in my spare time... */
-#define DMA_ERROR_P(regs)  ((sbus_readl((regs) + DMA_CSR) & DMA_HNDL_ERROR))
-#define DMA_IRQ_P(regs)    ((sbus_readl((regs) + DMA_CSR)) & (DMA_HNDL_INTR | DMA_HNDL_ERROR))
-#define DMA_WRITE_P(regs)  ((sbus_readl((regs) + DMA_CSR) & DMA_ST_WRITE))
-#define DMA_OFF(__regs)         \
-do {    u32 tmp = sbus_readl((__regs) + DMA_CSR); \
-        tmp &= ~DMA_ENABLE; \
-        sbus_writel(tmp, (__regs) + DMA_CSR); \
-} while(0)
-#define DMA_INTSOFF(__regs)     \
-do {    u32 tmp = sbus_readl((__regs) + DMA_CSR); \
-        tmp &= ~DMA_INT_ENAB; \
-        sbus_writel(tmp, (__regs) + DMA_CSR); \
-} while(0)
-#define DMA_INTSON(__regs)      \
-do {    u32 tmp = sbus_readl((__regs) + DMA_CSR); \
-        tmp |= DMA_INT_ENAB; \
-        sbus_writel(tmp, (__regs) + DMA_CSR); \
-} while(0)
-#define DMA_PUNTFIFO(__regs)    \
-do {    u32 tmp = sbus_readl((__regs) + DMA_CSR); \
-        tmp |= DMA_FIFO_INV; \
-        sbus_writel(tmp, (__regs) + DMA_CSR); \
-} while(0)
-#define DMA_SETSTART(__regs, __addr)    \
-        sbus_writel((u32)(__addr), (__regs) + DMA_ADDR);
-#define DMA_BEGINDMA_W(__regs)  \
-do {    u32 tmp = sbus_readl((__regs) + DMA_CSR); \
-        tmp |= (DMA_ST_WRITE|DMA_ENABLE|DMA_INT_ENAB); \
-        sbus_writel(tmp, (__regs) + DMA_CSR); \
-} while(0)
-#define DMA_BEGINDMA_R(__regs)  \
-do {    u32 tmp = sbus_readl((__regs) + DMA_CSR); \
-        tmp |= (DMA_ENABLE|DMA_INT_ENAB); \
-        tmp &= ~DMA_ST_WRITE; \
-        sbus_writel(tmp, (__regs) + DMA_CSR); \
-} while(0)
-
-/* For certain DMA chips, we need to disable ints upon irq entry
- * and turn them back on when we are done.  So in any ESP interrupt
- * handler you *must* call DMA_IRQ_ENTRY upon entry and DMA_IRQ_EXIT
- * when leaving the handler.  You have been warned...
- */
-#define DMA_IRQ_ENTRY(dma, dregs) do { \
-        if(DMA_ISBROKEN(dma)) DMA_INTSOFF(dregs); \
-   } while (0)
-
-#define DMA_IRQ_EXIT(dma, dregs) do { \
-        if(DMA_ISBROKEN(dma)) DMA_INTSON(dregs); \
-   } while(0)
-
-#define for_each_dvma(dma) \
-        for((dma) = dma_chain; (dma); (dma) = (dma)->next)
-
-/* From PCI */
-
-#ifdef CONFIG_PCI
-extern int isa_dma_bridge_buggy;
-#else
-#define isa_dma_bridge_buggy    (0)
-#endif
-
-#endif /* !(_ASM_SPARC64_DMA_H) */
diff --git a/include/asm-sparc/ebus.h b/include/asm-sparc/ebus.h
deleted file mode 100644
index a5da2d00cd18..000000000000
--- a/include/asm-sparc/ebus.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_EBUS_H
-#define ___ASM_SPARC_EBUS_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/ebus_64.h>
-#else
-#include <asm-sparc/ebus_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/elf.h b/include/asm-sparc/elf.h
deleted file mode 100644
index f035c45d7b5e..000000000000
--- a/include/asm-sparc/elf.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_ELF_H
-#define ___ASM_SPARC_ELF_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/elf_64.h>
-#else
-#include <asm-sparc/elf_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/floppy.h b/include/asm-sparc/floppy.h
deleted file mode 100644
index 6c628ba15a8d..000000000000
--- a/include/asm-sparc/floppy.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_FLOPPY_H
-#define ___ASM_SPARC_FLOPPY_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/floppy_64.h>
-#else
-#include <asm-sparc/floppy_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/floppy_32.h b/include/asm-sparc/floppy_32.h
deleted file mode 100644
index acdd06eafe59..000000000000
--- a/include/asm-sparc/floppy_32.h
+++ /dev/null
@@ -1,388 +0,0 @@
-/* asm-sparc/floppy.h: Sparc specific parts of the Floppy driver.
- *
- * Copyright (C) 1995 David S. Miller (davem@davemloft.net)
- */
-
-#ifndef __ASM_SPARC_FLOPPY_H
-#define __ASM_SPARC_FLOPPY_H
-
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/system.h>
-#include <asm/idprom.h>
-#include <asm/machines.h>
-#include <asm/oplib.h>
-#include <asm/auxio.h>
-#include <asm/irq.h>
-
-/* We don't need no stinkin' I/O port allocation crap. */
-#undef release_region
-#undef request_region
-#define release_region(X, Y)    do { } while(0)
-#define request_region(X, Y, Z) (1)
-
-/* References:
- * 1) Netbsd Sun floppy driver.
- * 2) NCR 82077 controller manual
- * 3) Intel 82077 controller manual
- */
-struct sun_flpy_controller {
-        volatile unsigned char status_82072;  /* Main Status reg. */
-#define dcr_82072              status_82072   /* Digital Control reg. */
-#define status1_82077          status_82072   /* Auxiliary Status reg. 1 */
-
-        volatile unsigned char data_82072;    /* Data fifo. */
-#define status2_82077          data_82072     /* Auxiliary Status reg. 2 */
-
-        volatile unsigned char dor_82077;     /* Digital Output reg. */
-        volatile unsigned char tapectl_82077; /* What the? Tape control reg? */
-
-        volatile unsigned char status_82077;  /* Main Status Register. */
-#define drs_82077              status_82077   /* Digital Rate Select reg. */
-
-        volatile unsigned char data_82077;    /* Data fifo. */
-        volatile unsigned char ___unused;
-        volatile unsigned char dir_82077;     /* Digital Input reg. */
-#define dcr_82077              dir_82077      /* Config Control reg. */
-};
-
-/* You'll only ever find one controller on a SparcStation anyways. */
-static struct sun_flpy_controller *sun_fdc = NULL;
-extern volatile unsigned char *fdc_status;
-
-struct sun_floppy_ops {
-        unsigned char (*fd_inb)(int port);
-        void (*fd_outb)(unsigned char value, int port);
-};
-
-static struct sun_floppy_ops sun_fdops;
-
-#define fd_inb(port)              sun_fdops.fd_inb(port)
-#define fd_outb(value,port)       sun_fdops.fd_outb(value,port)
-#define fd_enable_dma()           sun_fd_enable_dma()
-#define fd_disable_dma()          sun_fd_disable_dma()
-#define fd_request_dma()          (0) /* nothing... */
-#define fd_free_dma()             /* nothing... */
-#define fd_clear_dma_ff()         /* nothing... */
-#define fd_set_dma_mode(mode)     sun_fd_set_dma_mode(mode)
-#define fd_set_dma_addr(addr)     sun_fd_set_dma_addr(addr)
-#define fd_set_dma_count(count)   sun_fd_set_dma_count(count)
-#define fd_enable_irq()           /* nothing... */
-#define fd_disable_irq()          /* nothing... */
-#define fd_cacheflush(addr, size) /* nothing... */
-#define fd_request_irq()          sun_fd_request_irq()
-#define fd_free_irq()             /* nothing... */
-#if 0  /* P3: added by Alain, these cause a MMU corruption. 19960524 XXX */
-#define fd_dma_mem_alloc(size)    ((unsigned long) vmalloc(size))
-#define fd_dma_mem_free(addr,size) (vfree((void *)(addr)))
-#endif
-
-/* XXX This isn't really correct. XXX */
-#define get_dma_residue(x)        (0)
-
-#define FLOPPY0_TYPE  4
-#define FLOPPY1_TYPE  0
-
-/* Super paranoid... */
-#undef HAVE_DISABLE_HLT
-
-/* Here is where we catch the floppy driver trying to initialize,
- * therefore this is where we call the PROM device tree probing
- * routine etc. on the Sparc.
- */
-#define FDC1                      sun_floppy_init()
-
-#define N_FDC    1
-#define N_DRIVE  8
-
-/* No 64k boundary crossing problems on the Sparc. */
-#define CROSS_64KB(a,s) (0)
-
-/* Routines unique to each controller type on a Sun. */
-static void sun_set_dor(unsigned char value, int fdc_82077)
-{
-        if (sparc_cpu_model == sun4c) {
-                unsigned int bits = 0;
-                if (value & 0x10)
-                        bits |= AUXIO_FLPY_DSEL;
-                if ((value & 0x80) == 0)
-                        bits |= AUXIO_FLPY_EJCT;
-                set_auxio(bits, (~bits) & (AUXIO_FLPY_DSEL|AUXIO_FLPY_EJCT));
-        }
-        if (fdc_82077) {
-                sun_fdc->dor_82077 = value;
-        }
-}
-
-static unsigned char sun_read_dir(void)
-{
-        if (sparc_cpu_model == sun4c)
-                return (get_auxio() & AUXIO_FLPY_DCHG) ? 0x80 : 0;
-        else
-                return sun_fdc->dir_82077;
-}
-
-static unsigned char sun_82072_fd_inb(int port)
-{
-        udelay(5);
-        switch(port & 7) {
-        default:
-                printk("floppy: Asked to read unknown port %d\n", port);
-                panic("floppy: Port bolixed.");
-        case 4: /* FD_STATUS */
-                return sun_fdc->status_82072 & ~STATUS_DMA;
-        case 5: /* FD_DATA */
-                return sun_fdc->data_82072;
-        case 7: /* FD_DIR */
-                return sun_read_dir();
-        };
-        panic("sun_82072_fd_inb: How did I get here?");
-}
-
-static void sun_82072_fd_outb(unsigned char value, int port)
-{
-        udelay(5);
-        switch(port & 7) {
-        default:
-                printk("floppy: Asked to write to unknown port %d\n", port);
-                panic("floppy: Port bolixed.");
-        case 2: /* FD_DOR */
-                sun_set_dor(value, 0);
-                break;
-        case 5: /* FD_DATA */
-                sun_fdc->data_82072 = value;
-                break;
-        case 7: /* FD_DCR */
-                sun_fdc->dcr_82072 = value;
-                break;
-        case 4: /* FD_STATUS */
-                sun_fdc->status_82072 = value;
-                break;
-        };
-        return;
-}
-
-static unsigned char sun_82077_fd_inb(int port)
-{
-        udelay(5);
-        switch(port & 7) {
-        default:
-                printk("floppy: Asked to read unknown port %d\n", port);
-                panic("floppy: Port bolixed.");
-        case 0: /* FD_STATUS_0 */
-                return sun_fdc->status1_82077;
-        case 1: /* FD_STATUS_1 */
-                return sun_fdc->status2_82077;
-        case 2: /* FD_DOR */
-                return sun_fdc->dor_82077;
-        case 3: /* FD_TDR */
-                return sun_fdc->tapectl_82077;
-        case 4: /* FD_STATUS */
-                return sun_fdc->status_82077 & ~STATUS_DMA;
-        case 5: /* FD_DATA */
-                return sun_fdc->data_82077;
-        case 7: /* FD_DIR */
-                return sun_read_dir();
-        };
-        panic("sun_82077_fd_inb: How did I get here?");
-}
-
-static void sun_82077_fd_outb(unsigned char value, int port)
-{
-        udelay(5);
-        switch(port & 7) {
-        default:
-                printk("floppy: Asked to write to unknown port %d\n", port);
-                panic("floppy: Port bolixed.");
-        case 2: /* FD_DOR */
-                sun_set_dor(value, 1);
-                break;
-        case 5: /* FD_DATA */
-                sun_fdc->data_82077 = value;
-                break;
-        case 7: /* FD_DCR */
-                sun_fdc->dcr_82077 = value;
-                break;
-        case 4: /* FD_STATUS */
-                sun_fdc->status_82077 = value;
-                break;
-        case 3: /* FD_TDR */
-                sun_fdc->tapectl_82077 = value;
-                break;
-        };
-        return;
-}
-
-/* For pseudo-dma (Sun floppy drives have no real DMA available to
- * them so we must eat the data fifo bytes directly ourselves) we have
- * three state variables.  doing_pdma tells our inline low-level
- * assembly floppy interrupt entry point whether it should sit and eat
- * bytes from the fifo or just transfer control up to the higher level
- * floppy interrupt c-code.  I tried very hard but I could not get the
- * pseudo-dma to work in c-code without getting many overruns and
- * underruns.  If non-zero, doing_pdma encodes the direction of
- * the transfer for debugging.  1=read 2=write
- */
-extern char *pdma_vaddr;
-extern unsigned long pdma_size;
-extern volatile int doing_pdma;
-
-/* This is software state */
-extern char *pdma_base;
-extern unsigned long pdma_areasize;
-
-/* Common routines to all controller types on the Sparc. */
-static inline void virtual_dma_init(void)
-{
-        /* nothing... */
-}
-
-static inline void sun_fd_disable_dma(void)
-{
-        doing_pdma = 0;
-        if (pdma_base) {
-                mmu_unlockarea(pdma_base, pdma_areasize);
-                pdma_base = NULL;
-        }
-}
-
-static inline void sun_fd_set_dma_mode(int mode)
-{
-        switch(mode) {
-        case DMA_MODE_READ:
-                doing_pdma = 1;
-                break;
-        case DMA_MODE_WRITE:
-                doing_pdma = 2;
-                break;
-        default:
-                printk("Unknown dma mode %d\n", mode);
-                panic("floppy: Giving up...");
-        }
-}
-
-static inline void sun_fd_set_dma_addr(char *buffer)
-{
-        pdma_vaddr = buffer;
-}
-
-static inline void sun_fd_set_dma_count(int length)
-{
-        pdma_size = length;
-}
-
-static inline void sun_fd_enable_dma(void)
-{
-        pdma_vaddr = mmu_lockarea(pdma_vaddr, pdma_size);
-        pdma_base = pdma_vaddr;
-        pdma_areasize = pdma_size;
-}
-
-/* Our low-level entry point in arch/sparc/kernel/entry.S */
-extern int sparc_floppy_request_irq(int irq, unsigned long flags,
-                                    irq_handler_t irq_handler);
-
-static int sun_fd_request_irq(void)
-{
-        static int once = 0;
-        int error;
-
-        if(!once) {
-                once = 1;
-                error = sparc_floppy_request_irq(FLOPPY_IRQ,
-                                                 IRQF_DISABLED,
-                                                 floppy_interrupt);
-                return ((error == 0) ? 0 : -1);
-        } else return 0;
-}
-
-static struct linux_prom_registers fd_regs[2];
-
-static int sun_floppy_init(void)
-{
-        char state[128];
-        int tnode, fd_node, num_regs;
-        struct resource r;
-
-        use_virtual_dma = 1;
-
-        FLOPPY_IRQ = 11;
-        /* Forget it if we aren't on a machine that could possibly
-         * ever have a floppy drive.
-         */
-        if((sparc_cpu_model != sun4c && sparc_cpu_model != sun4m) ||
-           ((idprom->id_machtype == (SM_SUN4C | SM_4C_SLC)) ||
-            (idprom->id_machtype == (SM_SUN4C | SM_4C_ELC)))) {
-                /* We certainly don't have a floppy controller. */
-                goto no_sun_fdc;
-        }
-        /* Well, try to find one. */
-        tnode = prom_getchild(prom_root_node);
-        fd_node = prom_searchsiblings(tnode, "obio");
-        if(fd_node != 0) {
-                tnode = prom_getchild(fd_node);
-                fd_node = prom_searchsiblings(tnode, "SUNW,fdtwo");
-        } else {
-                fd_node = prom_searchsiblings(tnode, "fd");
-        }
-        if(fd_node == 0) {
-                goto no_sun_fdc;
-        }
-
-        /* The sun4m lets us know if the controller is actually usable. */
-        if(sparc_cpu_model == sun4m &&
-           prom_getproperty(fd_node, "status", state, sizeof(state)) != -1) {
-                if(!strcmp(state, "disabled")) {
-                        goto no_sun_fdc;
-                }
-        }
-        num_regs = prom_getproperty(fd_node, "reg", (char *) fd_regs, sizeof(fd_regs));
-        num_regs = (num_regs / sizeof(fd_regs[0]));
-        prom_apply_obio_ranges(fd_regs, num_regs);
-        memset(&r, 0, sizeof(r));
-        r.flags = fd_regs[0].which_io;
-        r.start = fd_regs[0].phys_addr;
-        sun_fdc = (struct sun_flpy_controller *)
-            sbus_ioremap(&r, 0, fd_regs[0].reg_size, "floppy");
-
-        /* Last minute sanity check... */
-        if(sun_fdc->status_82072 == 0xff) {
-                sun_fdc = NULL;
-                goto no_sun_fdc;
-        }
-
-        sun_fdops.fd_inb = sun_82077_fd_inb;
-        sun_fdops.fd_outb = sun_82077_fd_outb;
-        fdc_status = &sun_fdc->status_82077;
-
-        if (sun_fdc->dor_82077 == 0x80) {
-                sun_fdc->dor_82077 = 0x02;
-                if (sun_fdc->dor_82077 == 0x80) {
-                        sun_fdops.fd_inb = sun_82072_fd_inb;
-                        sun_fdops.fd_outb = sun_82072_fd_outb;
-                        fdc_status = &sun_fdc->status_82072;
-                }
-        }
-
-        /* Success... */
-        allowed_drive_mask = 0x01;
-        return (int) sun_fdc;
-
-no_sun_fdc:
-        return -1;
-}
-
-static int sparc_eject(void)
-{
-        set_dor(0x00, 0xff, 0x90);
-        udelay(500);
-        set_dor(0x00, 0x6f, 0x00);
-        udelay(500);
-        return 0;
-}
-
-#define fd_eject(drive) sparc_eject()
-
-#define EXTRA_FLOPPY_PARAMS
-
-#endif /* !(__ASM_SPARC_FLOPPY_H) */
diff --git a/include/asm-sparc/futex.h b/include/asm-sparc/futex.h
deleted file mode 100644
index c6a9f038c531..000000000000
--- a/include/asm-sparc/futex.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_FUTEX_H
-#define ___ASM_SPARC_FUTEX_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/futex_64.h>
-#else
-#include <asm-sparc/futex_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/hardirq.h b/include/asm-sparc/hardirq.h
deleted file mode 100644
index 156478773100..000000000000
--- a/include/asm-sparc/hardirq.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_HARDIRQ_H
-#define ___ASM_SPARC_HARDIRQ_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/hardirq_64.h>
-#else
-#include <asm-sparc/hardirq_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/head.h b/include/asm-sparc/head.h
deleted file mode 100644
index 14652abdea31..000000000000
--- a/include/asm-sparc/head.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_HEAD_H
-#define ___ASM_SPARC_HEAD_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/head_64.h>
-#else
-#include <asm-sparc/head_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/io.h b/include/asm-sparc/io.h
deleted file mode 100644
index fc9024d3dfc3..000000000000
--- a/include/asm-sparc/io.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_IO_H
-#define ___ASM_SPARC_IO_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/io_64.h>
-#else
-#include <asm-sparc/io_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/iommu.h b/include/asm-sparc/iommu.h
deleted file mode 100644
index 91b072b0d7a0..000000000000
--- a/include/asm-sparc/iommu.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_IOMMU_H
-#define ___ASM_SPARC_IOMMU_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/iommu_64.h>
-#else
-#include <asm-sparc/iommu_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/ipcbuf.h b/include/asm-sparc/ipcbuf.h
deleted file mode 100644
index 037605d986e2..000000000000
--- a/include/asm-sparc/ipcbuf.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_IPCBUF_H
-#define ___ASM_SPARC_IPCBUF_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/ipcbuf_64.h>
-#else
-#include <asm-sparc/ipcbuf_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/irq.h b/include/asm-sparc/irq.h
deleted file mode 100644
index 7af6bb4aa09c..000000000000
--- a/include/asm-sparc/irq.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_IRQ_H
-#define ___ASM_SPARC_IRQ_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/irq_64.h>
-#else
-#include <asm-sparc/irq_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/irqflags.h b/include/asm-sparc/irqflags.h
deleted file mode 100644
index c6402b187e23..000000000000
--- a/include/asm-sparc/irqflags.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_IRQFLAGS_H
-#define ___ASM_SPARC_IRQFLAGS_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/irqflags_64.h>
-#else
-#include <asm-sparc/irqflags_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/irqflags_32.h b/include/asm-sparc/irqflags_32.h
deleted file mode 100644
index db398fb32826..000000000000
--- a/include/asm-sparc/irqflags_32.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * include/asm-sparc/irqflags.h
- *
- * IRQ flags handling
- *
- * This file gets included from lowlevel asm headers too, to provide
- * wrapped versions of the local_irq_*() APIs, based on the
- * raw_local_irq_*() functions from the lowlevel headers.
- */
-#ifndef _ASM_IRQFLAGS_H
-#define _ASM_IRQFLAGS_H
-
-#ifndef __ASSEMBLY__
-
-extern void raw_local_irq_restore(unsigned long);
-extern unsigned long __raw_local_irq_save(void);
-extern void raw_local_irq_enable(void);
-
-static inline unsigned long getipl(void)
-{
-        unsigned long retval;
-
-        __asm__ __volatile__("rd        %%psr, %0" : "=r" (retval));
-        return retval;
-}
-
-#define raw_local_save_flags(flags) ((flags) = getipl())
-#define raw_local_irq_save(flags)   ((flags) = __raw_local_irq_save())
-#define raw_local_irq_disable()     ((void) __raw_local_irq_save())
-#define raw_irqs_disabled()         ((getipl() & PSR_PIL) != 0)
-
-static inline int raw_irqs_disabled_flags(unsigned long flags)
-{
-        return ((flags & PSR_PIL) != 0);
-}
-
-#endif /* (__ASSEMBLY__) */
-
-#endif /* !(_ASM_IRQFLAGS_H) */
diff --git a/include/asm-sparc/irqflags_64.h b/include/asm-sparc/irqflags_64.h
deleted file mode 100644
index 024fc54d0682..000000000000
--- a/include/asm-sparc/irqflags_64.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * include/asm-sparc64/irqflags.h
- *
- * IRQ flags handling
- *
- * This file gets included from lowlevel asm headers too, to provide
- * wrapped versions of the local_irq_*() APIs, based on the
- * raw_local_irq_*() functions from the lowlevel headers.
- */
-#ifndef _ASM_IRQFLAGS_H
-#define _ASM_IRQFLAGS_H
-
-#ifndef __ASSEMBLY__
-
-static inline unsigned long __raw_local_save_flags(void)
-{
-        unsigned long flags;
-
-        __asm__ __volatile__(
-                "rdpr   %%pil, %0"
-                : "=r" (flags)
-        );
-
-        return flags;
-}
-
-#define raw_local_save_flags(flags) \
-                do { (flags) = __raw_local_save_flags(); } while (0)
-
-static inline void raw_local_irq_restore(unsigned long flags)
-{
-        __asm__ __volatile__(
-                "wrpr   %0, %%pil"
-                : /* no output */
-                : "r" (flags)
-                : "memory"
-        );
-}
-
-static inline void raw_local_irq_disable(void)
-{
-        __asm__ __volatile__(
-                "wrpr   15, %%pil"
-                : /* no outputs */
-                : /* no inputs */
-                : "memory"
-        );
-}
-
-static inline void raw_local_irq_enable(void)
-{
-        __asm__ __volatile__(
-                "wrpr   0, %%pil"
-                : /* no outputs */
-                : /* no inputs */
-                : "memory"
-        );
-}
-
-static inline int raw_irqs_disabled_flags(unsigned long flags)
-{
-        return (flags > 0);
-}
-
-static inline int raw_irqs_disabled(void)
-{
-        unsigned long flags = __raw_local_save_flags();
-
-        return raw_irqs_disabled_flags(flags);
-}
-
-/*
- * For spinlocks, etc:
- */
-static inline unsigned long __raw_local_irq_save(void)
-{
-        unsigned long flags = __raw_local_save_flags();
-
-        raw_local_irq_disable();
-
-        return flags;
-}
-
-#define raw_local_irq_save(flags) \
-                do { (flags) = __raw_local_irq_save(); } while (0)
-
-#endif /* (__ASSEMBLY__) */
-
-#endif /* !(_ASM_IRQFLAGS_H) */
diff --git a/include/asm-sparc/kdebug.h b/include/asm-sparc/kdebug.h
deleted file mode 100644
index fe07d00d0534..000000000000
--- a/include/asm-sparc/kdebug.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_KDEBUG_H
-#define ___ASM_SPARC_KDEBUG_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/kdebug_64.h>
-#else
-#include <asm-sparc/kdebug_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/mc146818rtc.h b/include/asm-sparc/mc146818rtc.h
deleted file mode 100644
index 9ab65c21e9e4..000000000000
--- a/include/asm-sparc/mc146818rtc.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_MC146818RTC_H
-#define ___ASM_SPARC_MC146818RTC_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/mc146818rtc_64.h>
-#else
-#include <asm-sparc/mc146818rtc_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/mmu.h b/include/asm-sparc/mmu.h
deleted file mode 100644
index ee66bf6dcbd6..000000000000
--- a/include/asm-sparc/mmu.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_MMU_H
-#define ___ASM_SPARC_MMU_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/mmu_64.h>
-#else
-#include <asm-sparc/mmu_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/mmu_context.h b/include/asm-sparc/mmu_context.h
deleted file mode 100644
index e14efb9532ff..000000000000
--- a/include/asm-sparc/mmu_context.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_MMU_CONTEXT_H
-#define ___ASM_SPARC_MMU_CONTEXT_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/mmu_context_64.h>
-#else
-#include <asm-sparc/mmu_context_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/module.h b/include/asm-sparc/module.h
deleted file mode 100644
index 516138fe681a..000000000000
--- a/include/asm-sparc/module.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_MODULE_H
-#define ___ASM_SPARC_MODULE_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/module_64.h>
-#else
-#include <asm-sparc/module_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/mostek.h b/include/asm-sparc/mostek.h
deleted file mode 100644
index 5b9f7fec7ee7..000000000000
--- a/include/asm-sparc/mostek.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_MOSTEK_H
-#define ___ASM_SPARC_MOSTEK_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/mostek_64.h>
-#else
-#include <asm-sparc/mostek_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/of_platform.h b/include/asm-sparc/of_platform.h
deleted file mode 100644
index 851eb84d737e..000000000000
--- a/include/asm-sparc/of_platform.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_OF_PLATFORM_H
-#define ___ASM_SPARC_OF_PLATFORM_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/of_platform_64.h>
-#else
-#include <asm-sparc/of_platform_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/of_platform_32.h b/include/asm-sparc/of_platform_32.h
deleted file mode 100644
index 38334351c36b..000000000000
--- a/include/asm-sparc/of_platform_32.h
+++ /dev/null
@@ -1,24 +0,0 @@
-#ifndef _ASM_SPARC_OF_PLATFORM_H
-#define _ASM_SPARC_OF_PLATFORM_H
-/*
- *    Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corp.
- *                       <benh@kernel.crashing.org>
- *    Modified for Sparc by merging parts of asm-sparc/of_device.h
- *              by Stephen Rothwell
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-
-/* This is just here during the transition */
-#include <linux/of_platform.h>
-
-extern struct bus_type ebus_bus_type;
-extern struct bus_type sbus_bus_type;
-
-#define of_bus_type     of_platform_bus_type    /* for compatibility */
-
-#endif  /* _ASM_SPARC_OF_PLATFORM_H */
diff --git a/include/asm-sparc/of_platform_64.h b/include/asm-sparc/of_platform_64.h
deleted file mode 100644
index 78aa032b674c..000000000000
--- a/include/asm-sparc/of_platform_64.h
+++ /dev/null
@@ -1,25 +0,0 @@
-#ifndef _ASM_SPARC64_OF_PLATFORM_H
-#define _ASM_SPARC64_OF_PLATFORM_H
-/*
- *    Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corp.
- *                       <benh@kernel.crashing.org>
- *    Modified for Sparc by merging parts of asm-sparc/of_device.h
- *              by Stephen Rothwell
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-
-/* This is just here during the transition */
-#include <linux/of_platform.h>
-
-extern struct bus_type isa_bus_type;
-extern struct bus_type ebus_bus_type;
-extern struct bus_type sbus_bus_type;
-
-#define of_bus_type     of_platform_bus_type    /* for compatibility */
-
-#endif  /* _ASM_SPARC64_OF_PLATFORM_H */
diff --git a/include/asm-sparc/openprom.h b/include/asm-sparc/openprom.h
deleted file mode 100644
index 8c349f061994..000000000000
--- a/include/asm-sparc/openprom.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_OPENPROM_H
-#define ___ASM_SPARC_OPENPROM_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/openprom_64.h>
-#else
-#include <asm-sparc/openprom_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/oplib.h b/include/asm-sparc/oplib.h
deleted file mode 100644
index e88d7c04a292..000000000000
--- a/include/asm-sparc/oplib.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_OPLIB_H
-#define ___ASM_SPARC_OPLIB_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/oplib_64.h>
-#else
-#include <asm-sparc/oplib_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/page.h b/include/asm-sparc/page.h
deleted file mode 100644
index f32f49fcf75c..000000000000
--- a/include/asm-sparc/page.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_PAGE_H
-#define ___ASM_SPARC_PAGE_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/page_64.h>
-#else
-#include <asm-sparc/page_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/pci.h b/include/asm-sparc/pci.h
deleted file mode 100644
index b807d52a4809..000000000000
--- a/include/asm-sparc/pci.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_PCI_H
-#define ___ASM_SPARC_PCI_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/pci_64.h>
-#else
-#include <asm-sparc/pci_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/percpu.h b/include/asm-sparc/percpu.h
deleted file mode 100644
index d98ed6cf2e36..000000000000
--- a/include/asm-sparc/percpu.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_PERCPU_H
-#define ___ASM_SPARC_PERCPU_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/percpu_64.h>
-#else
-#include <asm-sparc/percpu_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/pgalloc.h b/include/asm-sparc/pgalloc.h
deleted file mode 100644
index 7fa02b53d392..000000000000
--- a/include/asm-sparc/pgalloc.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_PGALLOC_H
-#define ___ASM_SPARC_PGALLOC_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/pgalloc_64.h>
-#else
-#include <asm-sparc/pgalloc_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/pgtable.h b/include/asm-sparc/pgtable.h
deleted file mode 100644
index 63cdef53bc52..000000000000
--- a/include/asm-sparc/pgtable.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_PGTABLE_H
-#define ___ASM_SPARC_PGTABLE_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/pgtable_64.h>
-#else
-#include <asm-sparc/pgtable_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/pgtable_32.h b/include/asm-sparc/pgtable_32.h
deleted file mode 100644
index 781bd4694a1c..000000000000
--- a/include/asm-sparc/pgtable_32.h
+++ /dev/null
@@ -1,480 +0,0 @@
-#ifndef _SPARC_PGTABLE_H
-#define _SPARC_PGTABLE_H
-
-/*  asm-sparc/pgtable.h:  Defines and functions used to work
- *                        with Sparc page tables.
- *
- *  Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- *  Copyright (C) 1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
- */
-
-#ifndef __ASSEMBLY__
-#include <asm-generic/4level-fixup.h>
-
-#include <linux/spinlock.h>
-#include <linux/swap.h>
-#include <asm/types.h>
-#ifdef CONFIG_SUN4
-#include <asm/pgtsun4.h>
-#else
-#include <asm/pgtsun4c.h>
-#endif
-#include <asm/pgtsrmmu.h>
-#include <asm/vac-ops.h>
-#include <asm/oplib.h>
-#include <asm/btfixup.h>
-#include <asm/system.h>
-
-
-struct vm_area_struct;
-struct page;
-
-extern void load_mmu(void);
-extern unsigned long calc_highpages(void);
-
-BTFIXUPDEF_SIMM13(pgdir_shift)
-BTFIXUPDEF_SETHI(pgdir_size)
-BTFIXUPDEF_SETHI(pgdir_mask)
-
-BTFIXUPDEF_SIMM13(ptrs_per_pmd)
-BTFIXUPDEF_SIMM13(ptrs_per_pgd)
-BTFIXUPDEF_SIMM13(user_ptrs_per_pgd)
-
-#define pte_ERROR(e)   __builtin_trap()
-#define pmd_ERROR(e)   __builtin_trap()
-#define pgd_ERROR(e)   __builtin_trap()
-
-BTFIXUPDEF_INT(page_none)
-BTFIXUPDEF_INT(page_copy)
-BTFIXUPDEF_INT(page_readonly)
-BTFIXUPDEF_INT(page_kernel)
-
-#define PMD_SHIFT               SUN4C_PMD_SHIFT
-#define PMD_SIZE                (1UL << PMD_SHIFT)
-#define PMD_MASK                (~(PMD_SIZE-1))
-#define PMD_ALIGN(__addr)       (((__addr) + ~PMD_MASK) & PMD_MASK)
-#define PGDIR_SHIFT             BTFIXUP_SIMM13(pgdir_shift)
-#define PGDIR_SIZE              BTFIXUP_SETHI(pgdir_size)
-#define PGDIR_MASK              BTFIXUP_SETHI(pgdir_mask)
-#define PTRS_PER_PTE            1024
-#define PTRS_PER_PMD            BTFIXUP_SIMM13(ptrs_per_pmd)
-#define PTRS_PER_PGD            BTFIXUP_SIMM13(ptrs_per_pgd)
-#define USER_PTRS_PER_PGD       BTFIXUP_SIMM13(user_ptrs_per_pgd)
-#define FIRST_USER_ADDRESS      0
-#define PTE_SIZE                (PTRS_PER_PTE*4)
-
-#define PAGE_NONE      __pgprot(BTFIXUP_INT(page_none))
-extern pgprot_t PAGE_SHARED;
-#define PAGE_COPY      __pgprot(BTFIXUP_INT(page_copy))
-#define PAGE_READONLY  __pgprot(BTFIXUP_INT(page_readonly))
-
-extern unsigned long page_kernel;
-
-#ifdef MODULE
-#define PAGE_KERNEL     page_kernel
-#else
-#define PAGE_KERNEL    __pgprot(BTFIXUP_INT(page_kernel))
-#endif
-
-/* Top-level page directory */
-extern pgd_t swapper_pg_dir[1024];
-
-extern void paging_init(void);
-
-/* Page table for 0-4MB for everybody, on the Sparc this
- * holds the same as on the i386.
- */
-extern pte_t pg0[1024];
-extern pte_t pg1[1024];
-extern pte_t pg2[1024];
-extern pte_t pg3[1024];
-
-extern unsigned long ptr_in_current_pgd;
-
-/* Here is a trick, since mmap.c need the initializer elements for
- * protection_map[] to be constant at compile time, I set the following
- * to all zeros.  I set it to the real values after I link in the
- * appropriate MMU page table routines at boot time.
- */
-#define __P000  __pgprot(0)
-#define __P001  __pgprot(0)
-#define __P010  __pgprot(0)
-#define __P011  __pgprot(0)
-#define __P100  __pgprot(0)
-#define __P101  __pgprot(0)
-#define __P110  __pgprot(0)
-#define __P111  __pgprot(0)
-
-#define __S000  __pgprot(0)
-#define __S001  __pgprot(0)
-#define __S010  __pgprot(0)
-#define __S011  __pgprot(0)
-#define __S100  __pgprot(0)
-#define __S101  __pgprot(0)
-#define __S110  __pgprot(0)
-#define __S111  __pgprot(0)
-
-extern int num_contexts;
-
-/* First physical page can be anywhere, the following is needed so that
- * va-->pa and vice versa conversions work properly without performance
- * hit for all __pa()/__va() operations.
- */
-extern unsigned long phys_base;
-extern unsigned long pfn_base;
-
-/*
- * BAD_PAGETABLE is used when we need a bogus page-table, while
- * BAD_PAGE is used for a bogus page.
- *
- * ZERO_PAGE is a global shared page that is always zero: used
- * for zero-mapped memory areas etc..
- */
-extern pte_t * __bad_pagetable(void);
-extern pte_t __bad_page(void);
-extern unsigned long empty_zero_page;
-
-#define BAD_PAGETABLE __bad_pagetable()
-#define BAD_PAGE __bad_page()
-#define ZERO_PAGE(vaddr) (virt_to_page(&empty_zero_page))
-
-/*
- */
-BTFIXUPDEF_CALL_CONST(struct page *, pmd_page, pmd_t)
-BTFIXUPDEF_CALL_CONST(unsigned long, pgd_page_vaddr, pgd_t)
-
-#define pmd_page(pmd) BTFIXUP_CALL(pmd_page)(pmd)
-#define pgd_page_vaddr(pgd) BTFIXUP_CALL(pgd_page_vaddr)(pgd)
-
-BTFIXUPDEF_SETHI(none_mask)
-BTFIXUPDEF_CALL_CONST(int, pte_present, pte_t)
-BTFIXUPDEF_CALL(void, pte_clear, pte_t *)
-
-static inline int pte_none(pte_t pte)
-{
-        return !(pte_val(pte) & ~BTFIXUP_SETHI(none_mask));
-}
-
-#define pte_present(pte) BTFIXUP_CALL(pte_present)(pte)
-#define pte_clear(mm,addr,pte) BTFIXUP_CALL(pte_clear)(pte)
-
-BTFIXUPDEF_CALL_CONST(int, pmd_bad, pmd_t)
-BTFIXUPDEF_CALL_CONST(int, pmd_present, pmd_t)
-BTFIXUPDEF_CALL(void, pmd_clear, pmd_t *)
-
-static inline int pmd_none(pmd_t pmd)
-{
-        return !(pmd_val(pmd) & ~BTFIXUP_SETHI(none_mask));
-}
-
-#define pmd_bad(pmd) BTFIXUP_CALL(pmd_bad)(pmd)
-#define pmd_present(pmd) BTFIXUP_CALL(pmd_present)(pmd)
-#define pmd_clear(pmd) BTFIXUP_CALL(pmd_clear)(pmd)
-
-BTFIXUPDEF_CALL_CONST(int, pgd_none, pgd_t)
-BTFIXUPDEF_CALL_CONST(int, pgd_bad, pgd_t)
-BTFIXUPDEF_CALL_CONST(int, pgd_present, pgd_t)
-BTFIXUPDEF_CALL(void, pgd_clear, pgd_t *)
-
-#define pgd_none(pgd) BTFIXUP_CALL(pgd_none)(pgd)
-#define pgd_bad(pgd) BTFIXUP_CALL(pgd_bad)(pgd)
-#define pgd_present(pgd) BTFIXUP_CALL(pgd_present)(pgd)
-#define pgd_clear(pgd) BTFIXUP_CALL(pgd_clear)(pgd)
-
-/*
- * The following only work if pte_present() is true.
- * Undefined behaviour if not..
- */
-BTFIXUPDEF_HALF(pte_writei)
-BTFIXUPDEF_HALF(pte_dirtyi)
-BTFIXUPDEF_HALF(pte_youngi)
-
-static int pte_write(pte_t pte) __attribute_const__;
-static inline int pte_write(pte_t pte)
-{
-        return pte_val(pte) & BTFIXUP_HALF(pte_writei);
-}
-
-static int pte_dirty(pte_t pte) __attribute_const__;
-static inline int pte_dirty(pte_t pte)
-{
-        return pte_val(pte) & BTFIXUP_HALF(pte_dirtyi);
-}
-
-static int pte_young(pte_t pte) __attribute_const__;
-static inline int pte_young(pte_t pte)
-{
-        return pte_val(pte) & BTFIXUP_HALF(pte_youngi);
-}
-
-/*
- * The following only work if pte_present() is not true.
- */
-BTFIXUPDEF_HALF(pte_filei)
-
-static int pte_file(pte_t pte) __attribute_const__;
-static inline int pte_file(pte_t pte)
-{
-        return pte_val(pte) & BTFIXUP_HALF(pte_filei);
-}
-
-static inline int pte_special(pte_t pte)
-{
-        return 0;
-}
-
-/*
- */
-BTFIXUPDEF_HALF(pte_wrprotecti)
-BTFIXUPDEF_HALF(pte_mkcleani)
-BTFIXUPDEF_HALF(pte_mkoldi)
-
-static pte_t pte_wrprotect(pte_t pte) __attribute_const__;
-static inline pte_t pte_wrprotect(pte_t pte)
-{
-        return __pte(pte_val(pte) & ~BTFIXUP_HALF(pte_wrprotecti));
-}
-
-static pte_t pte_mkclean(pte_t pte) __attribute_const__;
-static inline pte_t pte_mkclean(pte_t pte)
-{
-        return __pte(pte_val(pte) & ~BTFIXUP_HALF(pte_mkcleani));
-}
-
-static pte_t pte_mkold(pte_t pte) __attribute_const__;
-static inline pte_t pte_mkold(pte_t pte)
-{
-        return __pte(pte_val(pte) & ~BTFIXUP_HALF(pte_mkoldi));
-}
-
-BTFIXUPDEF_CALL_CONST(pte_t, pte_mkwrite, pte_t)
-BTFIXUPDEF_CALL_CONST(pte_t, pte_mkdirty, pte_t)
-BTFIXUPDEF_CALL_CONST(pte_t, pte_mkyoung, pte_t)
-
-#define pte_mkwrite(pte) BTFIXUP_CALL(pte_mkwrite)(pte)
-#define pte_mkdirty(pte) BTFIXUP_CALL(pte_mkdirty)(pte)
-#define pte_mkyoung(pte) BTFIXUP_CALL(pte_mkyoung)(pte)
-
-#define pte_mkspecial(pte)    (pte)
-
-#define pfn_pte(pfn, prot)              mk_pte(pfn_to_page(pfn), prot)
-
-BTFIXUPDEF_CALL(unsigned long,   pte_pfn, pte_t)
-#define pte_pfn(pte) BTFIXUP_CALL(pte_pfn)(pte)
-#define pte_page(pte)   pfn_to_page(pte_pfn(pte))
-
-/*
- * Conversion functions: convert a page and protection to a page entry,
- * and a page entry and page directory to the page they refer to.
- */
-BTFIXUPDEF_CALL_CONST(pte_t, mk_pte, struct page *, pgprot_t)
-
-BTFIXUPDEF_CALL_CONST(pte_t, mk_pte_phys, unsigned long, pgprot_t)
-BTFIXUPDEF_CALL_CONST(pte_t, mk_pte_io, unsigned long, pgprot_t, int)
-BTFIXUPDEF_CALL_CONST(pgprot_t, pgprot_noncached, pgprot_t)
-
-#define mk_pte(page,pgprot) BTFIXUP_CALL(mk_pte)(page,pgprot)
-#define mk_pte_phys(page,pgprot) BTFIXUP_CALL(mk_pte_phys)(page,pgprot)
-#define mk_pte_io(page,pgprot,space) BTFIXUP_CALL(mk_pte_io)(page,pgprot,space)
-
-#define pgprot_noncached(pgprot) BTFIXUP_CALL(pgprot_noncached)(pgprot)
-
-BTFIXUPDEF_INT(pte_modify_mask)
-
-static pte_t pte_modify(pte_t pte, pgprot_t newprot) __attribute_const__;
-static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
-{
-        return __pte((pte_val(pte) & BTFIXUP_INT(pte_modify_mask)) |
-                pgprot_val(newprot));
-}
-
-#define pgd_index(address) ((address) >> PGDIR_SHIFT)
-
-/* to find an entry in a page-table-directory */
-#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address))
-
-/* to find an entry in a kernel page-table-directory */
-#define pgd_offset_k(address) pgd_offset(&init_mm, address)
-
-/* Find an entry in the second-level page table.. */
-BTFIXUPDEF_CALL(pmd_t *, pmd_offset, pgd_t *, unsigned long)
-#define pmd_offset(dir,addr) BTFIXUP_CALL(pmd_offset)(dir,addr)
-
-/* Find an entry in the third-level page table.. */
-BTFIXUPDEF_CALL(pte_t *, pte_offset_kernel, pmd_t *, unsigned long)
-#define pte_offset_kernel(dir,addr) BTFIXUP_CALL(pte_offset_kernel)(dir,addr)
-
-/*
- * This shortcut works on sun4m (and sun4d) because the nocache area is static,
- * and sun4c is guaranteed to have no highmem anyway.
- */
-#define pte_offset_map(d, a)            pte_offset_kernel(d,a)
-#define pte_offset_map_nested(d, a)     pte_offset_kernel(d,a)
-
-#define pte_unmap(pte)          do{}while(0)
-#define pte_unmap_nested(pte)   do{}while(0)
-
-/* Certain architectures need to do special things when pte's
- * within a page table are directly modified.  Thus, the following
- * hook is made available.
- */
-
-BTFIXUPDEF_CALL(void, set_pte, pte_t *, pte_t)
-
-#define set_pte(ptep,pteval) BTFIXUP_CALL(set_pte)(ptep,pteval)
-#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
-
-struct seq_file;
-BTFIXUPDEF_CALL(void, mmu_info, struct seq_file *)
-
-#define mmu_info(p) BTFIXUP_CALL(mmu_info)(p)
-
-/* Fault handler stuff... */
-#define FAULT_CODE_PROT     0x1
-#define FAULT_CODE_WRITE    0x2
-#define FAULT_CODE_USER     0x4
-
-BTFIXUPDEF_CALL(void, update_mmu_cache, struct vm_area_struct *, unsigned long, pte_t)
-
-#define update_mmu_cache(vma,addr,pte) BTFIXUP_CALL(update_mmu_cache)(vma,addr,pte)
-
-BTFIXUPDEF_CALL(void, sparc_mapiorange, unsigned int, unsigned long,
-    unsigned long, unsigned int)
-BTFIXUPDEF_CALL(void, sparc_unmapiorange, unsigned long, unsigned int)
-#define sparc_mapiorange(bus,pa,va,len) BTFIXUP_CALL(sparc_mapiorange)(bus,pa,va,len)
-#define sparc_unmapiorange(va,len) BTFIXUP_CALL(sparc_unmapiorange)(va,len)
-
-extern int invalid_segment;
-
-/* Encode and de-code a swap entry */
-BTFIXUPDEF_CALL(unsigned long, __swp_type, swp_entry_t)
-BTFIXUPDEF_CALL(unsigned long, __swp_offset, swp_entry_t)
-BTFIXUPDEF_CALL(swp_entry_t, __swp_entry, unsigned long, unsigned long)
-
-#define __swp_type(__x)                 BTFIXUP_CALL(__swp_type)(__x)
-#define __swp_offset(__x)               BTFIXUP_CALL(__swp_offset)(__x)
-#define __swp_entry(__type,__off)       BTFIXUP_CALL(__swp_entry)(__type,__off)
-
-#define __pte_to_swp_entry(pte)         ((swp_entry_t) { pte_val(pte) })
-#define __swp_entry_to_pte(x)           ((pte_t) { (x).val })
-
-/* file-offset-in-pte helpers */
-BTFIXUPDEF_CALL(unsigned long, pte_to_pgoff, pte_t pte);
-BTFIXUPDEF_CALL(pte_t, pgoff_to_pte, unsigned long pgoff);
-
-#define pte_to_pgoff(pte) BTFIXUP_CALL(pte_to_pgoff)(pte)
-#define pgoff_to_pte(off) BTFIXUP_CALL(pgoff_to_pte)(off)
-
-/*
- * This is made a constant because mm/fremap.c required a constant.
- * Note that layout of these bits is different between sun4c.c and srmmu.c.
- */
-#define PTE_FILE_MAX_BITS 24
-
-/*
- */
-struct ctx_list {
-        struct ctx_list *next;
-        struct ctx_list *prev;
-        unsigned int ctx_number;
-        struct mm_struct *ctx_mm;
-};
-
-extern struct ctx_list *ctx_list_pool;  /* Dynamically allocated */
-extern struct ctx_list ctx_free;        /* Head of free list */
-extern struct ctx_list ctx_used;        /* Head of used contexts list */
-
-#define NO_CONTEXT     -1
-
-static inline void remove_from_ctx_list(struct ctx_list *entry)
-{
-        entry->next->prev = entry->prev;
-        entry->prev->next = entry->next;
-}
-
-static inline void add_to_ctx_list(struct ctx_list *head, struct ctx_list *entry)
-{
-        entry->next = head;
-        (entry->prev = head->prev)->next = entry;
-        head->prev = entry;
-}
-#define add_to_free_ctxlist(entry) add_to_ctx_list(&ctx_free, entry)
-#define add_to_used_ctxlist(entry) add_to_ctx_list(&ctx_used, entry)
-
-static inline unsigned long
-__get_phys (unsigned long addr)
-{
-        switch (sparc_cpu_model){
-        case sun4:
-        case sun4c:
-                return sun4c_get_pte (addr) << PAGE_SHIFT;
-        case sun4m:
-        case sun4d:
-                return ((srmmu_get_pte (addr) & 0xffffff00) << 4);
-        default:
-                return 0;
-        }
-}
-
-static inline int
-__get_iospace (unsigned long addr)
-{
-        switch (sparc_cpu_model){
-        case sun4:
-        case sun4c:
-                return -1; /* Don't check iospace on sun4c */
-        case sun4m:
-        case sun4d:
-                return (srmmu_get_pte (addr) >> 28);
-        default:
-                return -1;
-        }
-}
-
-extern unsigned long *sparc_valid_addr_bitmap;
-
-/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
-#define kern_addr_valid(addr) \
-        (test_bit(__pa((unsigned long)(addr))>>20, sparc_valid_addr_bitmap))
-
-extern int io_remap_pfn_range(struct vm_area_struct *vma,
-                              unsigned long from, unsigned long pfn,
-                              unsigned long size, pgprot_t prot);
-
-/*
- * For sparc32&64, the pfn in io_remap_pfn_range() carries <iospace> in
- * its high 4 bits.  These macros/functions put it there or get it from there.
- */
-#define MK_IOSPACE_PFN(space, pfn)      (pfn | (space << (BITS_PER_LONG - 4)))
-#define GET_IOSPACE(pfn)                (pfn >> (BITS_PER_LONG - 4))
-#define GET_PFN(pfn)                    (pfn & 0x0fffffffUL)
-
-#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
-#define ptep_set_access_flags(__vma, __address, __ptep, __entry, __dirty) \
-({                                                                        \
-        int __changed = !pte_same(*(__ptep), __entry);                    \
-        if (__changed) {                                                  \
-                set_pte_at((__vma)->vm_mm, (__address), __ptep, __entry); \
-                flush_tlb_page(__vma, __address);                         \
-        }                                                                 \
-        (sparc_cpu_model == sun4c) || __changed;                          \
-})
-
-#include <asm-generic/pgtable.h>
-
-#endif /* !(__ASSEMBLY__) */
-
-#define VMALLOC_START           0xfe600000
-/* XXX Alter this when I get around to fixing sun4c - Anton */
-#define VMALLOC_END             0xffc00000
-
-
-/* We provide our own get_unmapped_area to cope with VA holes for userland */
-#define HAVE_ARCH_UNMAPPED_AREA
-
-/*
- * No page table caches to initialise
- */
-#define pgtable_cache_init()    do { } while (0)
-
-#endif /* !(_SPARC_PGTABLE_H) */
diff --git a/include/asm-sparc/posix_types.h b/include/asm-sparc/posix_types.h
deleted file mode 100644
index 58c820d75e83..000000000000
--- a/include/asm-sparc/posix_types.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_POSIX_TYPES_H
-#define ___ASM_SPARC_POSIX_TYPES_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/posix_types_64.h>
-#else
-#include <asm-sparc/posix_types_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/processor.h b/include/asm-sparc/processor.h
deleted file mode 100644
index 11a66bb02eaa..000000000000
--- a/include/asm-sparc/processor.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_PROCESSOR_H
-#define ___ASM_SPARC_PROCESSOR_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/processor_64.h>
-#else
-#include <asm-sparc/processor_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/processor_32.h b/include/asm-sparc/processor_32.h
deleted file mode 100644
index 562c0d69c537..000000000000
--- a/include/asm-sparc/processor_32.h
+++ /dev/null
@@ -1,128 +0,0 @@
-/* include/asm-sparc/processor.h
- *
- * Copyright (C) 1994 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#ifndef __ASM_SPARC_PROCESSOR_H
-#define __ASM_SPARC_PROCESSOR_H
-
-/*
- * Sparc32 implementation of macro that returns current
- * instruction pointer ("program counter").
- */
-#define current_text_addr() ({ void *pc; __asm__("sethi %%hi(1f), %0; or %0, %%lo(1f), %0;\n1:" : "=r" (pc)); pc; })
-
-#include <asm/psr.h>
-#include <asm/ptrace.h>
-#include <asm/head.h>
-#include <asm/signal.h>
-#include <asm/btfixup.h>
-#include <asm/page.h>
-
-/*
- * The sparc has no problems with write protection
- */
-#define wp_works_ok 1
-#define wp_works_ok__is_a_macro /* for versions in ksyms.c */
-
-/* Whee, this is STACK_TOP + PAGE_SIZE and the lowest kernel address too...
- * That one page is used to protect kernel from intruders, so that
- * we can make our access_ok test faster
- */
-#define TASK_SIZE       PAGE_OFFSET
-#ifdef __KERNEL__
-#define STACK_TOP       (PAGE_OFFSET - PAGE_SIZE)
-#define STACK_TOP_MAX   STACK_TOP
-#endif /* __KERNEL__ */
-
-struct task_struct;
-
-#ifdef __KERNEL__
-struct fpq {
-        unsigned long *insn_addr;
-        unsigned long insn;
-};
-#endif
-
-typedef struct {
-        int seg;
-} mm_segment_t;
-
-/* The Sparc processor specific thread struct. */
-struct thread_struct {
-        struct pt_regs *kregs;
-        unsigned int _pad1;
-
-        /* Special child fork kpsr/kwim values. */
-        unsigned long fork_kpsr __attribute__ ((aligned (8)));
-        unsigned long fork_kwim;
-
-        /* Floating point regs */
-        unsigned long   float_regs[32] __attribute__ ((aligned (8)));
-        unsigned long   fsr;
-        unsigned long   fpqdepth;
-        struct fpq      fpqueue[16];
-        unsigned long flags;
-        mm_segment_t current_ds;
-};
-
-#define SPARC_FLAG_KTHREAD      0x1    /* task is a kernel thread */
-#define SPARC_FLAG_UNALIGNED    0x2    /* is allowed to do unaligned accesses */
-
-#define INIT_THREAD  { \
-        .flags = SPARC_FLAG_KTHREAD, \
-        .current_ds = KERNEL_DS, \
-}
-
-/* Return saved PC of a blocked thread. */
-extern unsigned long thread_saved_pc(struct task_struct *t);
-
-/* Do necessary setup to start up a newly executed thread. */
-static inline void start_thread(struct pt_regs * regs, unsigned long pc,
-                                    unsigned long sp)
-{
-        register unsigned long zero asm("g1");
-
-        regs->psr = (regs->psr & (PSR_CWP)) | PSR_S;
-        regs->pc = ((pc & (~3)) - 4);
-        regs->npc = regs->pc + 4;
-        regs->y = 0;
-        zero = 0;
-        __asm__ __volatile__("std\t%%g0, [%0 + %3 + 0x00]\n\t"
-                             "std\t%%g0, [%0 + %3 + 0x08]\n\t"
-                             "std\t%%g0, [%0 + %3 + 0x10]\n\t"
-                             "std\t%%g0, [%0 + %3 + 0x18]\n\t"
-                             "std\t%%g0, [%0 + %3 + 0x20]\n\t"
-                             "std\t%%g0, [%0 + %3 + 0x28]\n\t"
-                             "std\t%%g0, [%0 + %3 + 0x30]\n\t"
-                             "st\t%1, [%0 + %3 + 0x38]\n\t"
-                             "st\t%%g0, [%0 + %3 + 0x3c]"
-                             : /* no outputs */
-                             : "r" (regs),
-                               "r" (sp - sizeof(struct reg_window)),
-                               "r" (zero),
-                               "i" ((const unsigned long)(&((struct pt_regs *)0)->u_regs[0]))
-                             : "memory");
-}
-
-/* Free all resources held by a thread. */
-#define release_thread(tsk)             do { } while(0)
-extern pid_t kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
-
-/* Prepare to copy thread state - unlazy all lazy status */
-#define prepare_to_copy(tsk)    do { } while (0)
-
-extern unsigned long get_wchan(struct task_struct *);
-
-#define KSTK_EIP(tsk)  ((tsk)->thread.kregs->pc)
-#define KSTK_ESP(tsk)  ((tsk)->thread.kregs->u_regs[UREG_FP])
-
-#ifdef __KERNEL__
-
-extern struct task_struct *last_task_used_math;
-
-#define cpu_relax()     barrier()
-
-#endif
-
-#endif /* __ASM_SPARC_PROCESSOR_H */
diff --git a/include/asm-sparc/processor_64.h b/include/asm-sparc/processor_64.h
deleted file mode 100644
index 70d42801a0d2..000000000000
--- a/include/asm-sparc/processor_64.h
+++ /dev/null
@@ -1,237 +0,0 @@
-/*
- * include/asm-sparc64/processor.h
- *
- * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#ifndef __ASM_SPARC64_PROCESSOR_H
-#define __ASM_SPARC64_PROCESSOR_H
-
-/*
- * Sparc64 implementation of macro that returns current
- * instruction pointer ("program counter").
- */
-#define current_text_addr() ({ void *pc; __asm__("rd %%pc, %0" : "=r" (pc)); pc; })
-
-#include <asm/asi.h>
-#include <asm/pstate.h>
-#include <asm/ptrace.h>
-#include <asm/page.h>
-
-/* The sparc has no problems with write protection */
-#define wp_works_ok 1
-#define wp_works_ok__is_a_macro /* for versions in ksyms.c */
-
-/*
- * User lives in his very own context, and cannot reference us. Note
- * that TASK_SIZE is a misnomer, it really gives maximum user virtual
- * address that the kernel will allocate out.
- *
- * XXX No longer using virtual page tables, kill this upper limit...
- */
-#define VA_BITS         44
-#ifndef __ASSEMBLY__
-#define VPTE_SIZE       (1UL << (VA_BITS - PAGE_SHIFT + 3))
-#else
-#define VPTE_SIZE       (1 << (VA_BITS - PAGE_SHIFT + 3))
-#endif
-
-#define TASK_SIZE       ((unsigned long)-VPTE_SIZE)
-#define TASK_SIZE_OF(tsk) \
-        (test_tsk_thread_flag(tsk,TIF_32BIT) ? \
-         (1UL << 32UL) : TASK_SIZE)
-#ifdef __KERNEL__
-
-#define STACK_TOP32     ((1UL << 32UL) - PAGE_SIZE)
-#define STACK_TOP64     (0x0000080000000000UL - (1UL << 32UL))
-
-#define STACK_TOP       (test_thread_flag(TIF_32BIT) ? \
-                         STACK_TOP32 : STACK_TOP64)
-
-#define STACK_TOP_MAX   STACK_TOP64
-
-#endif
-
-#ifndef __ASSEMBLY__
-
-typedef struct {
-        unsigned char seg;
-} mm_segment_t;
-
-/* The Sparc processor specific thread struct. */
-/* XXX This should die, everything can go into thread_info now. */
-struct thread_struct {
-#ifdef CONFIG_DEBUG_SPINLOCK
-        /* How many spinlocks held by this thread.
-         * Used with spin lock debugging to catch tasks
-         * sleeping illegally with locks held.
-         */
-        int smp_lock_count;
-        unsigned int smp_lock_pc;
-#else
-        int dummy; /* f'in gcc bug... */
-#endif
-};
-
-#endif /* !(__ASSEMBLY__) */
-
-#ifndef CONFIG_DEBUG_SPINLOCK
-#define INIT_THREAD  {                  \
-        0,                              \
-}
-#else /* CONFIG_DEBUG_SPINLOCK */
-#define INIT_THREAD  {                                  \
-/* smp_lock_count, smp_lock_pc, */                      \
-   0,              0,                                   \
-}
-#endif /* !(CONFIG_DEBUG_SPINLOCK) */
-
-#ifndef __ASSEMBLY__
-
-#include <linux/types.h>
-
-/* Return saved PC of a blocked thread. */
-struct task_struct;
-extern unsigned long thread_saved_pc(struct task_struct *);
-
-/* On Uniprocessor, even in RMO processes see TSO semantics */
-#ifdef CONFIG_SMP
-#define TSTATE_INITIAL_MM       TSTATE_TSO
-#else
-#define TSTATE_INITIAL_MM       TSTATE_RMO
-#endif
-
-/* Do necessary setup to start up a newly executed thread. */
-#define start_thread(regs, pc, sp) \
-do { \
-        unsigned long __asi = ASI_PNF; \
-        regs->tstate = (regs->tstate & (TSTATE_CWP)) | (TSTATE_INITIAL_MM|TSTATE_IE) | (__asi << 24UL); \
-        regs->tpc = ((pc & (~3)) - 4); \
-        regs->tnpc = regs->tpc + 4; \
-        regs->y = 0; \
-        set_thread_wstate(1 << 3); \
-        if (current_thread_info()->utraps) { \
-                if (*(current_thread_info()->utraps) < 2) \
-                        kfree(current_thread_info()->utraps); \
-                else \
-                        (*(current_thread_info()->utraps))--; \
-                current_thread_info()->utraps = NULL; \
-        } \
-        __asm__ __volatile__( \
-        "stx            %%g0, [%0 + %2 + 0x00]\n\t" \
-        "stx            %%g0, [%0 + %2 + 0x08]\n\t" \
-        "stx            %%g0, [%0 + %2 + 0x10]\n\t" \
-        "stx            %%g0, [%0 + %2 + 0x18]\n\t" \
-        "stx            %%g0, [%0 + %2 + 0x20]\n\t" \
-        "stx            %%g0, [%0 + %2 + 0x28]\n\t" \
-        "stx            %%g0, [%0 + %2 + 0x30]\n\t" \
-        "stx            %%g0, [%0 + %2 + 0x38]\n\t" \
-        "stx            %%g0, [%0 + %2 + 0x40]\n\t" \
-        "stx            %%g0, [%0 + %2 + 0x48]\n\t" \
-        "stx            %%g0, [%0 + %2 + 0x50]\n\t" \
-        "stx            %%g0, [%0 + %2 + 0x58]\n\t" \
-        "stx            %%g0, [%0 + %2 + 0x60]\n\t" \
-        "stx            %%g0, [%0 + %2 + 0x68]\n\t" \
-        "stx            %1,   [%0 + %2 + 0x70]\n\t" \
-        "stx            %%g0, [%0 + %2 + 0x78]\n\t" \
-        "wrpr           %%g0, (1 << 3), %%wstate\n\t" \
-        : \
-        : "r" (regs), "r" (sp - sizeof(struct reg_window) - STACK_BIAS), \
-          "i" ((const unsigned long)(&((struct pt_regs *)0)->u_regs[0]))); \
-} while (0)
-
-#define start_thread32(regs, pc, sp) \
-do { \
-        unsigned long __asi = ASI_PNF; \
-        pc &= 0x00000000ffffffffUL; \
-        sp &= 0x00000000ffffffffUL; \
-        regs->tstate = (regs->tstate & (TSTATE_CWP))|(TSTATE_INITIAL_MM|TSTATE_IE|TSTATE_AM) | (__asi << 24UL); \
-        regs->tpc = ((pc & (~3)) - 4); \
-        regs->tnpc = regs->tpc + 4; \
-        regs->y = 0; \
-        set_thread_wstate(2 << 3); \
-        if (current_thread_info()->utraps) { \
-                if (*(current_thread_info()->utraps) < 2) \
-                        kfree(current_thread_info()->utraps); \
-                else \
-                        (*(current_thread_info()->utraps))--; \
-                current_thread_info()->utraps = NULL; \
-        } \
-        __asm__ __volatile__( \
-        "stx            %%g0, [%0 + %2 + 0x00]\n\t" \
-        "stx            %%g0, [%0 + %2 + 0x08]\n\t" \
-        "stx            %%g0, [%0 + %2 + 0x10]\n\t" \
-        "stx            %%g0, [%0 + %2 + 0x18]\n\t" \
-        "stx            %%g0, [%0 + %2 + 0x20]\n\t" \
-        "stx            %%g0, [%0 + %2 + 0x28]\n\t" \
-        "stx            %%g0, [%0 + %2 + 0x30]\n\t" \
-        "stx            %%g0, [%0 + %2 + 0x38]\n\t" \
-        "stx            %%g0, [%0 + %2 + 0x40]\n\t" \
-        "stx            %%g0, [%0 + %2 + 0x48]\n\t" \
-        "stx            %%g0, [%0 + %2 + 0x50]\n\t" \
-        "stx            %%g0, [%0 + %2 + 0x58]\n\t" \
-        "stx            %%g0, [%0 + %2 + 0x60]\n\t" \
-        "stx            %%g0, [%0 + %2 + 0x68]\n\t" \
-        "stx            %1,   [%0 + %2 + 0x70]\n\t" \
-        "stx            %%g0, [%0 + %2 + 0x78]\n\t" \
-        "wrpr           %%g0, (2 << 3), %%wstate\n\t" \
-        : \
-        : "r" (regs), "r" (sp - sizeof(struct reg_window32)), \
-          "i" ((const unsigned long)(&((struct pt_regs *)0)->u_regs[0]))); \
-} while (0)
-
-/* Free all resources held by a thread. */
-#define release_thread(tsk)             do { } while (0)
-
-/* Prepare to copy thread state - unlazy all lazy status */
-#define prepare_to_copy(tsk)    do { } while (0)
-
-extern pid_t kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
-
-extern unsigned long get_wchan(struct task_struct *task);
-
-#define task_pt_regs(tsk) (task_thread_info(tsk)->kregs)
-#define KSTK_EIP(tsk)  (task_pt_regs(tsk)->tpc)
-#define KSTK_ESP(tsk)  (task_pt_regs(tsk)->u_regs[UREG_FP])
-
-#define cpu_relax()     barrier()
-
-/* Prefetch support.  This is tuned for UltraSPARC-III and later.
- * UltraSPARC-I will treat these as nops, and UltraSPARC-II has
- * a shallower prefetch queue than later chips.
- */
-#define ARCH_HAS_PREFETCH
-#define ARCH_HAS_PREFETCHW
-#define ARCH_HAS_SPINLOCK_PREFETCH
-
-static inline void prefetch(const void *x)
-{
-        /* We do not use the read prefetch mnemonic because that
-         * prefetches into the prefetch-cache which only is accessible
-         * by floating point operations in UltraSPARC-III and later.
-         * By contrast, "#one_write" prefetches into the L2 cache
-         * in shared state.
-         */
-        __asm__ __volatile__("prefetch [%0], #one_write"
-                             : /* no outputs */
-                             : "r" (x));
-}
-
-static inline void prefetchw(const void *x)
-{
-        /* The most optimal prefetch to use for writes is
-         * "#n_writes".  This brings the cacheline into the
-         * L2 cache in "owned" state.
-         */
-        __asm__ __volatile__("prefetch [%0], #n_writes"
-                             : /* no outputs */
-                             : "r" (x));
-}
-
-#define spin_lock_prefetch(x)   prefetchw(x)
-
-#define HAVE_ARCH_PICK_MMAP_LAYOUT
-
-#endif /* !(__ASSEMBLY__) */
-
-#endif /* !(__ASM_SPARC64_PROCESSOR_H) */
diff --git a/include/asm-sparc/ptrace.h b/include/asm-sparc/ptrace.h
deleted file mode 100644
index f36ab6c30ff3..000000000000
--- a/include/asm-sparc/ptrace.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_PTRACE_H
-#define ___ASM_SPARC_PTRACE_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/ptrace_64.h>
-#else
-#include <asm-sparc/ptrace_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/ptrace_32.h b/include/asm-sparc/ptrace_32.h
deleted file mode 100644
index 0401cc7ec38e..000000000000
--- a/include/asm-sparc/ptrace_32.h
+++ /dev/null
@@ -1,175 +0,0 @@
-#ifndef _SPARC_PTRACE_H
-#define _SPARC_PTRACE_H
-
-#include <asm/psr.h>
-
-/* This struct defines the way the registers are stored on the
- * stack during a system call and basically all traps.
- */
-
-#ifndef __ASSEMBLY__
-
-#include <linux/types.h>
-
-struct pt_regs {
-        unsigned long psr;
-        unsigned long pc;
-        unsigned long npc;
-        unsigned long y;
-        unsigned long u_regs[16]; /* globals and ins */
-};
-
-#define UREG_G0        0
-#define UREG_G1        1
-#define UREG_G2        2
-#define UREG_G3        3
-#define UREG_G4        4
-#define UREG_G5        5
-#define UREG_G6        6
-#define UREG_G7        7
-#define UREG_I0        8
-#define UREG_I1        9
-#define UREG_I2        10
-#define UREG_I3        11
-#define UREG_I4        12
-#define UREG_I5        13
-#define UREG_I6        14
-#define UREG_I7        15
-#define UREG_WIM       UREG_G0
-#define UREG_FADDR     UREG_G0
-#define UREG_FP        UREG_I6
-#define UREG_RETPC     UREG_I7
-
-static inline bool pt_regs_is_syscall(struct pt_regs *regs)
-{
-        return (regs->psr & PSR_SYSCALL);
-}
-
-static inline bool pt_regs_clear_syscall(struct pt_regs *regs)
-{
-        return (regs->psr &= ~PSR_SYSCALL);
-}
-
-/* A register window */
-struct reg_window {
-        unsigned long locals[8];
-        unsigned long ins[8];
-};
-
-/* A Sparc stack frame */
-struct sparc_stackf {
-        unsigned long locals[8];
-        unsigned long ins[6];
-        struct sparc_stackf *fp;
-        unsigned long callers_pc;
-        char *structptr;
-        unsigned long xargs[6];
-        unsigned long xxargs[1];
-};
-
-#define TRACEREG_SZ   sizeof(struct pt_regs)
-#define STACKFRAME_SZ sizeof(struct sparc_stackf)
-
-#ifdef __KERNEL__
-
-#define user_mode(regs) (!((regs)->psr & PSR_PS))
-#define instruction_pointer(regs) ((regs)->pc)
-unsigned long profile_pc(struct pt_regs *);
-extern void show_regs(struct pt_regs *);
-#endif
-
-#else /* __ASSEMBLY__ */
-/* For assembly code. */
-#define TRACEREG_SZ       0x50
-#define STACKFRAME_SZ     0x60
-#endif
-
-/*
- * The asm-offsets.h is a generated file, so we cannot include it.
- * It may be OK for glibc headers, but it's utterly pointless for C code.
- * The assembly code using those offsets has to include it explicitly.
- */
-/* #include <asm/asm-offsets.h> */
-
-/* These are for pt_regs. */
-#define PT_PSR    0x0
-#define PT_PC     0x4
-#define PT_NPC    0x8
-#define PT_Y      0xc
-#define PT_G0     0x10
-#define PT_WIM    PT_G0
-#define PT_G1     0x14
-#define PT_G2     0x18
-#define PT_G3     0x1c
-#define PT_G4     0x20
-#define PT_G5     0x24
-#define PT_G6     0x28
-#define PT_G7     0x2c
-#define PT_I0     0x30
-#define PT_I1     0x34
-#define PT_I2     0x38
-#define PT_I3     0x3c
-#define PT_I4     0x40
-#define PT_I5     0x44
-#define PT_I6     0x48
-#define PT_FP     PT_I6
-#define PT_I7     0x4c
-
-/* Reg_window offsets */
-#define RW_L0     0x00
-#define RW_L1     0x04
-#define RW_L2     0x08
-#define RW_L3     0x0c
-#define RW_L4     0x10
-#define RW_L5     0x14
-#define RW_L6     0x18
-#define RW_L7     0x1c
-#define RW_I0     0x20
-#define RW_I1     0x24
-#define RW_I2     0x28
-#define RW_I3     0x2c
-#define RW_I4     0x30
-#define RW_I5     0x34
-#define RW_I6     0x38
-#define RW_I7     0x3c
-
-/* Stack_frame offsets */
-#define SF_L0     0x00
-#define SF_L1     0x04
-#define SF_L2     0x08
-#define SF_L3     0x0c
-#define SF_L4     0x10
-#define SF_L5     0x14
-#define SF_L6     0x18
-#define SF_L7     0x1c
-#define SF_I0     0x20
-#define SF_I1     0x24
-#define SF_I2     0x28
-#define SF_I3     0x2c
-#define SF_I4     0x30
-#define SF_I5     0x34
-#define SF_FP     0x38
-#define SF_PC     0x3c
-#define SF_RETP   0x40
-#define SF_XARG0  0x44
-#define SF_XARG1  0x48
-#define SF_XARG2  0x4c
-#define SF_XARG3  0x50
-#define SF_XARG4  0x54
-#define SF_XARG5  0x58
-#define SF_XXARG  0x5c
-
-/* Stuff for the ptrace system call */
-#define PTRACE_SPARC_DETACH       11
-#define PTRACE_GETREGS            12
-#define PTRACE_SETREGS            13
-#define PTRACE_GETFPREGS          14
-#define PTRACE_SETFPREGS          15
-#define PTRACE_READDATA           16
-#define PTRACE_WRITEDATA          17
-#define PTRACE_READTEXT           18
-#define PTRACE_WRITETEXT          19
-#define PTRACE_GETFPAREGS         20
-#define PTRACE_SETFPAREGS         21
-
-#endif /* !(_SPARC_PTRACE_H) */
diff --git a/include/asm-sparc/ptrace_64.h b/include/asm-sparc/ptrace_64.h
deleted file mode 100644
index a682e66d5c4a..000000000000
--- a/include/asm-sparc/ptrace_64.h
+++ /dev/null
@@ -1,346 +0,0 @@
-#ifndef _SPARC64_PTRACE_H
-#define _SPARC64_PTRACE_H
-
-#include <asm/pstate.h>
-
-/* This struct defines the way the registers are stored on the
- * stack during a system call and basically all traps.
- */
-
-/* This magic value must have the low 9 bits clear,
- * as that is where we encode the %tt value, see below.
- */
-#define PT_REGS_MAGIC 0x57ac6c00
-
-#ifndef __ASSEMBLY__
-
-#include <linux/types.h>
-
-struct pt_regs {
-        unsigned long u_regs[16]; /* globals and ins */
-        unsigned long tstate;
-        unsigned long tpc;
-        unsigned long tnpc;
-        unsigned int y;
-
-        /* We encode a magic number, PT_REGS_MAGIC, along
-         * with the %tt (trap type) register value at trap
-         * entry time.  The magic number allows us to identify
-         * accurately a trap stack frame in the stack
-         * unwinder, and the %tt value allows us to test
-         * things like "in a system call" etc. for an arbitray
-         * process.
-         *
-         * The PT_REGS_MAGIC is choosen such that it can be
-         * loaded completely using just a sethi instruction.
-         */
-        unsigned int magic;
-};
-
-static inline int pt_regs_trap_type(struct pt_regs *regs)
-{
-        return regs->magic & 0x1ff;
-}
-
-static inline bool pt_regs_is_syscall(struct pt_regs *regs)
-{
-        return (regs->tstate & TSTATE_SYSCALL);
-}
-
-static inline bool pt_regs_clear_syscall(struct pt_regs *regs)
-{
-        return (regs->tstate &= ~TSTATE_SYSCALL);
-}
-
-struct pt_regs32 {
-        unsigned int psr;
-        unsigned int pc;
-        unsigned int npc;
-        unsigned int y;
-        unsigned int u_regs[16]; /* globals and ins */
-};
-
-#define UREG_G0        0
-#define UREG_G1        1
-#define UREG_G2        2
-#define UREG_G3        3
-#define UREG_G4        4
-#define UREG_G5        5
-#define UREG_G6        6
-#define UREG_G7        7
-#define UREG_I0        8
-#define UREG_I1        9
-#define UREG_I2        10
-#define UREG_I3        11
-#define UREG_I4        12
-#define UREG_I5        13
-#define UREG_I6        14
-#define UREG_I7        15
-#define UREG_FP        UREG_I6
-#define UREG_RETPC     UREG_I7
-
-/* A V9 register window */
-struct reg_window {
-        unsigned long locals[8];
-        unsigned long ins[8];
-};
-
-/* A 32-bit register window. */
-struct reg_window32 {
-        unsigned int locals[8];
-        unsigned int ins[8];
-};
-
-/* A V9 Sparc stack frame */
-struct sparc_stackf {
-        unsigned long locals[8];
-        unsigned long ins[6];
-        struct sparc_stackf *fp;
-        unsigned long callers_pc;
-        char *structptr;
-        unsigned long xargs[6];
-        unsigned long xxargs[1];
-};
-
-/* A 32-bit Sparc stack frame */
-struct sparc_stackf32 {
-        unsigned int locals[8];
-        unsigned int ins[6];
-        unsigned int fp;
-        unsigned int callers_pc;
-        unsigned int structptr;
-        unsigned int xargs[6];
-        unsigned int xxargs[1];
-};
-
-struct sparc_trapf {
-        unsigned long locals[8];
-        unsigned long ins[8];
-        unsigned long _unused;
-        struct pt_regs *regs;
-};
-
-#define TRACEREG_SZ     sizeof(struct pt_regs)
-#define STACKFRAME_SZ   sizeof(struct sparc_stackf)
-
-#define TRACEREG32_SZ   sizeof(struct pt_regs32)
-#define STACKFRAME32_SZ sizeof(struct sparc_stackf32)
-
-#ifdef __KERNEL__
-
-struct global_reg_snapshot {
-        unsigned long           tstate;
-        unsigned long           tpc;
-        unsigned long           tnpc;
-        unsigned long           o7;
-        unsigned long           i7;
-        struct thread_info      *thread;
-        unsigned long           pad1;
-        unsigned long           pad2;
-};
-
-#define __ARCH_WANT_COMPAT_SYS_PTRACE
-
-#define force_successful_syscall_return()           \
-do {    current_thread_info()->syscall_noerror = 1; \
-} while (0)
-#define user_mode(regs) (!((regs)->tstate & TSTATE_PRIV))
-#define instruction_pointer(regs) ((regs)->tpc)
-#define regs_return_value(regs) ((regs)->u_regs[UREG_I0])
-#ifdef CONFIG_SMP
-extern unsigned long profile_pc(struct pt_regs *);
-#else
-#define profile_pc(regs) instruction_pointer(regs)
-#endif
-extern void show_regs(struct pt_regs *);
-extern void __show_regs(struct pt_regs *);
-#endif
-
-#else /* __ASSEMBLY__ */
-/* For assembly code. */
-#define TRACEREG_SZ             0xa0
-#define STACKFRAME_SZ           0xc0
-
-#define TRACEREG32_SZ           0x50
-#define STACKFRAME32_SZ         0x60
-#endif
-
-#ifdef __KERNEL__
-#define STACK_BIAS              2047
-#endif
-
-/* These are for pt_regs. */
-#define PT_V9_G0     0x00
-#define PT_V9_G1     0x08
-#define PT_V9_G2     0x10
-#define PT_V9_G3     0x18
-#define PT_V9_G4     0x20
-#define PT_V9_G5     0x28
-#define PT_V9_G6     0x30
-#define PT_V9_G7     0x38
-#define PT_V9_I0     0x40
-#define PT_V9_I1     0x48
-#define PT_V9_I2     0x50
-#define PT_V9_I3     0x58
-#define PT_V9_I4     0x60
-#define PT_V9_I5     0x68
-#define PT_V9_I6     0x70
-#define PT_V9_FP     PT_V9_I6
-#define PT_V9_I7     0x78
-#define PT_V9_TSTATE 0x80
-#define PT_V9_TPC    0x88
-#define PT_V9_TNPC   0x90
-#define PT_V9_Y      0x98
-#define PT_V9_MAGIC  0x9c
-#define PT_TSTATE       PT_V9_TSTATE
-#define PT_TPC          PT_V9_TPC
-#define PT_TNPC         PT_V9_TNPC
-
-/* These for pt_regs32. */
-#define PT_PSR    0x0
-#define PT_PC     0x4
-#define PT_NPC    0x8
-#define PT_Y      0xc
-#define PT_G0     0x10
-#define PT_WIM    PT_G0
-#define PT_G1     0x14
-#define PT_G2     0x18
-#define PT_G3     0x1c
-#define PT_G4     0x20
-#define PT_G5     0x24
-#define PT_G6     0x28
-#define PT_G7     0x2c
-#define PT_I0     0x30
-#define PT_I1     0x34
-#define PT_I2     0x38
-#define PT_I3     0x3c
-#define PT_I4     0x40
-#define PT_I5     0x44
-#define PT_I6     0x48
-#define PT_FP     PT_I6
-#define PT_I7     0x4c
-
-/* Reg_window offsets */
-#define RW_V9_L0     0x00
-#define RW_V9_L1     0x08
-#define RW_V9_L2     0x10
-#define RW_V9_L3     0x18
-#define RW_V9_L4     0x20
-#define RW_V9_L5     0x28
-#define RW_V9_L6     0x30
-#define RW_V9_L7     0x38
-#define RW_V9_I0     0x40
-#define RW_V9_I1     0x48
-#define RW_V9_I2     0x50
-#define RW_V9_I3     0x58
-#define RW_V9_I4     0x60
-#define RW_V9_I5     0x68
-#define RW_V9_I6     0x70
-#define RW_V9_I7     0x78
-
-#define RW_L0     0x00
-#define RW_L1     0x04
-#define RW_L2     0x08
-#define RW_L3     0x0c
-#define RW_L4     0x10
-#define RW_L5     0x14
-#define RW_L6     0x18
-#define RW_L7     0x1c
-#define RW_I0     0x20
-#define RW_I1     0x24
-#define RW_I2     0x28
-#define RW_I3     0x2c
-#define RW_I4     0x30
-#define RW_I5     0x34
-#define RW_I6     0x38
-#define RW_I7     0x3c
-
-/* Stack_frame offsets */
-#define SF_V9_L0     0x00
-#define SF_V9_L1     0x08
-#define SF_V9_L2     0x10
-#define SF_V9_L3     0x18
-#define SF_V9_L4     0x20
-#define SF_V9_L5     0x28
-#define SF_V9_L6     0x30
-#define SF_V9_L7     0x38
-#define SF_V9_I0     0x40
-#define SF_V9_I1     0x48
-#define SF_V9_I2     0x50
-#define SF_V9_I3     0x58
-#define SF_V9_I4     0x60
-#define SF_V9_I5     0x68
-#define SF_V9_FP     0x70
-#define SF_V9_PC     0x78
-#define SF_V9_RETP   0x80
-#define SF_V9_XARG0  0x88
-#define SF_V9_XARG1  0x90
-#define SF_V9_XARG2  0x98
-#define SF_V9_XARG3  0xa0
-#define SF_V9_XARG4  0xa8
-#define SF_V9_XARG5  0xb0
-#define SF_V9_XXARG  0xb8
-
-#define SF_L0     0x00
-#define SF_L1     0x04
-#define SF_L2     0x08
-#define SF_L3     0x0c
-#define SF_L4     0x10
-#define SF_L5     0x14
-#define SF_L6     0x18
-#define SF_L7     0x1c
-#define SF_I0     0x20
-#define SF_I1     0x24
-#define SF_I2     0x28
-#define SF_I3     0x2c
-#define SF_I4     0x30
-#define SF_I5     0x34
-#define SF_FP     0x38
-#define SF_PC     0x3c
-#define SF_RETP   0x40
-#define SF_XARG0  0x44
-#define SF_XARG1  0x48
-#define SF_XARG2  0x4c
-#define SF_XARG3  0x50
-#define SF_XARG4  0x54
-#define SF_XARG5  0x58
-#define SF_XXARG  0x5c
-
-#ifdef __KERNEL__
-
-/* global_reg_snapshot offsets */
-#define GR_SNAP_TSTATE  0x00
-#define GR_SNAP_TPC     0x08
-#define GR_SNAP_TNPC    0x10
-#define GR_SNAP_O7      0x18
-#define GR_SNAP_I7      0x20
-#define GR_SNAP_THREAD  0x28
-#define GR_SNAP_PAD1    0x30
-#define GR_SNAP_PAD2    0x38
-
-#endif  /*  __KERNEL__  */
-
-/* Stuff for the ptrace system call */
-#define PTRACE_SPARC_DETACH       11
-#define PTRACE_GETREGS            12
-#define PTRACE_SETREGS            13
-#define PTRACE_GETFPREGS          14
-#define PTRACE_SETFPREGS          15
-#define PTRACE_READDATA           16
-#define PTRACE_WRITEDATA          17
-#define PTRACE_READTEXT           18
-#define PTRACE_WRITETEXT          19
-#define PTRACE_GETFPAREGS         20
-#define PTRACE_SETFPAREGS         21
-
-/* There are for debugging 64-bit processes, either from a 32 or 64 bit
- * parent.  Thus their complements are for debugging 32-bit processes only.
- */
-
-#define PTRACE_GETREGS64          22
-#define PTRACE_SETREGS64          23
-/* PTRACE_SYSCALL is 24 */
-#define PTRACE_GETFPREGS64        25
-#define PTRACE_SETFPREGS64        26
-
-#endif /* !(_SPARC64_PTRACE_H) */
diff --git a/include/asm-sparc/reg.h b/include/asm-sparc/reg.h
deleted file mode 100644
index cb34b0a49aad..000000000000
--- a/include/asm-sparc/reg.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_REG_H
-#define ___ASM_SPARC_REG_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/reg_64.h>
-#else
-#include <asm-sparc/reg_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/reg_32.h b/include/asm-sparc/reg_32.h
deleted file mode 100644
index 42fecfcd97e7..000000000000
--- a/include/asm-sparc/reg_32.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * linux/include/asm-sparc/reg.h
- * Layout of the registers as expected by gdb on the Sparc
- * we should replace the user.h definitions with those in
- * this file, we don't even use the other
- * -miguel
- *
- * The names of the structures, constants and aliases in this file
- * have the same names as the sunos ones, some programs rely on these
- * names (gdb for example).
- *
- */
-
-#ifndef __SPARC_REG_H
-#define __SPARC_REG_H
-
-struct regs {
-        int     r_psr;
-#define r_ps r_psr
-        int     r_pc;
-        int     r_npc;
-        int     r_y;
-        int     r_g1;
-        int     r_g2;
-        int     r_g3;
-        int     r_g4;
-        int     r_g5;
-        int     r_g6;
-        int     r_g7;
-        int     r_o0;
-        int     r_o1;
-        int     r_o2;
-        int     r_o3;
-        int     r_o4;
-        int     r_o5;
-        int     r_o6;
-        int     r_o7;
-};
-
-struct fpq {
-        unsigned long *addr;
-        unsigned long instr;
-};
-
-struct  fq {
-        union {
-                double  whole;
-                struct  fpq fpq;
-        } FQu;
-};
-
-#define FPU_REGS_TYPE unsigned int
-#define FPU_FSR_TYPE unsigned
-
-struct fp_status {
-        union {
-                FPU_REGS_TYPE Fpu_regs[32];
-                double  Fpu_dregs[16];
-        } fpu_fr;
-        FPU_FSR_TYPE Fpu_fsr;
-        unsigned Fpu_flags;
-        unsigned Fpu_extra;
-        unsigned Fpu_qcnt;
-        struct fq Fpu_q[16];
-};
-
-#define fpu_regs  f_fpstatus.fpu_fr.Fpu_regs
-#define fpu_dregs f_fpstatus.fpu_fr.Fpu_dregs
-#define fpu_fsr   f_fpstatus.Fpu_fsr
-#define fpu_flags f_fpstatus.Fpu_flags
-#define fpu_extra f_fpstatus.Fpu_extra
-#define fpu_q     f_fpstatus.Fpu_q
-#define fpu_qcnt  f_fpstatus.Fpu_qcnt
-
-struct fpu {
-        struct fp_status f_fpstatus;
-};
-
-#endif /* __SPARC_REG_H */
diff --git a/include/asm-sparc/reg_64.h b/include/asm-sparc/reg_64.h
deleted file mode 100644
index eb24a07ff4d5..000000000000
--- a/include/asm-sparc/reg_64.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * linux/asm-sparc64/reg.h
- * Layout of the registers as expected by gdb on the Sparc
- * we should replace the user.h definitions with those in
- * this file, we don't even use the other
- * -miguel
- *
- * The names of the structures, constants and aliases in this file
- * have the same names as the sunos ones, some programs rely on these
- * names (gdb for example).
- *
- */
-
-#ifndef __SPARC64_REG_H
-#define __SPARC64_REG_H
-
-struct regs {
-        unsigned long r_g1;
-        unsigned long r_g2;
-        unsigned long r_g3;
-        unsigned long r_g4;
-        unsigned long r_g5;
-        unsigned long r_g6;
-        unsigned long r_g7;
-        unsigned long r_o0;
-        unsigned long r_o1;
-        unsigned long r_o2;
-        unsigned long r_o3;
-        unsigned long r_o4;
-        unsigned long r_o5;
-        unsigned long r_o6;
-        unsigned long r_o7;
-        unsigned long __pad;
-        unsigned long r_tstate;
-        unsigned long r_tpc;
-        unsigned long r_tnpc;
-        unsigned int  r_y;
-        unsigned int  r_fprs;
-};
-
-#define FPU_REGS_TYPE unsigned int
-#define FPU_FSR_TYPE unsigned long
-
-struct fp_status {
-        unsigned long fpu_fr[32];
-        unsigned long Fpu_fsr;
-};
-
-struct fpu {
-        struct fp_status f_fpstatus;
-};
-
-#define fpu_regs  f_fpstatus.fpu_fr
-#define fpu_fsr   f_fpstatus.Fpu_fsr
-
-#endif /* __SPARC64_REG_H */
diff --git a/include/asm-sparc/sbus.h b/include/asm-sparc/sbus.h
deleted file mode 100644
index 8f29a1979665..000000000000
--- a/include/asm-sparc/sbus.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_SBUS_H
-#define ___ASM_SPARC_SBUS_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/sbus_64.h>
-#else
-#include <asm-sparc/sbus_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/scatterlist.h b/include/asm-sparc/scatterlist.h
deleted file mode 100644
index b1a0e316c2b6..000000000000
--- a/include/asm-sparc/scatterlist.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_SCATTERLIST_H
-#define ___ASM_SPARC_SCATTERLIST_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/scatterlist_64.h>
-#else
-#include <asm-sparc/scatterlist_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/sections.h b/include/asm-sparc/sections.h
deleted file mode 100644
index cbd019162425..000000000000
--- a/include/asm-sparc/sections.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_SECTIONS_H
-#define ___ASM_SPARC_SECTIONS_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/sections_64.h>
-#else
-#include <asm-sparc/sections_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/sfp-machine.h b/include/asm-sparc/sfp-machine.h
deleted file mode 100644
index c676fcc2dd27..000000000000
--- a/include/asm-sparc/sfp-machine.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_SFP_MACHINE_H
-#define ___ASM_SPARC_SFP_MACHINE_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/sfp-machine_64.h>
-#else
-#include <asm-sparc/sfp-machine_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/shmparam.h b/include/asm-sparc/shmparam.h
deleted file mode 100644
index 16fda7e9acc8..000000000000
--- a/include/asm-sparc/shmparam.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_SHMPARAM_H
-#define ___ASM_SPARC_SHMPARAM_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/shmparam_64.h>
-#else
-#include <asm-sparc/shmparam_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/sigcontext.h b/include/asm-sparc/sigcontext.h
deleted file mode 100644
index 82fc7d54a4fa..000000000000
--- a/include/asm-sparc/sigcontext.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_SIGCONTEXT_H
-#define ___ASM_SPARC_SIGCONTEXT_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/sigcontext_64.h>
-#else
-#include <asm-sparc/sigcontext_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/siginfo.h b/include/asm-sparc/siginfo.h
deleted file mode 100644
index 2c9fccf4ce18..000000000000
--- a/include/asm-sparc/siginfo.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_SIGINFO_H
-#define ___ASM_SPARC_SIGINFO_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/siginfo_64.h>
-#else
-#include <asm-sparc/siginfo_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/signal.h b/include/asm-sparc/signal.h
deleted file mode 100644
index 36f5f9e482f7..000000000000
--- a/include/asm-sparc/signal.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_SIGNAL_H
-#define ___ASM_SPARC_SIGNAL_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/signal_64.h>
-#else
-#include <asm-sparc/signal_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/smp.h b/include/asm-sparc/smp.h
deleted file mode 100644
index 1f9dedfbabd8..000000000000
--- a/include/asm-sparc/smp.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_SMP_H
-#define ___ASM_SPARC_SMP_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/smp_64.h>
-#else
-#include <asm-sparc/smp_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/spinlock.h b/include/asm-sparc/spinlock.h
deleted file mode 100644
index 3b71c50b72eb..000000000000
--- a/include/asm-sparc/spinlock.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_SPINLOCK_H
-#define ___ASM_SPARC_SPINLOCK_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/spinlock_64.h>
-#else
-#include <asm-sparc/spinlock_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/stat.h b/include/asm-sparc/stat.h
deleted file mode 100644
index 9fdcaf8c9cd3..000000000000
--- a/include/asm-sparc/stat.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_STAT_H
-#define ___ASM_SPARC_STAT_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/stat_64.h>
-#else
-#include <asm-sparc/stat_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/statfs.h b/include/asm-sparc/statfs.h
deleted file mode 100644
index a70cc52e7018..000000000000
--- a/include/asm-sparc/statfs.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_STATFS_H
-#define ___ASM_SPARC_STATFS_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/statfs_64.h>
-#else
-#include <asm-sparc/statfs_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/string.h b/include/asm-sparc/string.h
deleted file mode 100644
index 14c04c7697a5..000000000000
--- a/include/asm-sparc/string.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_STRING_H
-#define ___ASM_SPARC_STRING_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/string_64.h>
-#else
-#include <asm-sparc/string_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/sunbpp.h b/include/asm-sparc/sunbpp.h
deleted file mode 100644
index 92ee1a8ff3a2..000000000000
--- a/include/asm-sparc/sunbpp.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * include/asm-sparc/sunbpp.h
- */
-
-#ifndef _ASM_SPARC_SUNBPP_H
-#define _ASM_SPARC_SUNBPP_H
-
-struct bpp_regs {
-  /* DMA registers */
-  __volatile__ __u32 p_csr;             /* DMA Control/Status Register */
-  __volatile__ __u32 p_addr;            /* Address Register */
-  __volatile__ __u32 p_bcnt;            /* Byte Count Register */
-  __volatile__ __u32 p_tst_csr;         /* Test Control/Status (DMA2 only) */
-  /* Parallel Port registers */
-  __volatile__ __u16 p_hcr;             /* Hardware Configuration Register */
-  __volatile__ __u16 p_ocr;             /* Operation Configuration Register */
-  __volatile__ __u8 p_dr;               /* Parallel Data Register */
-  __volatile__ __u8 p_tcr;              /* Transfer Control Register */
-  __volatile__ __u8 p_or;               /* Output Register */
-  __volatile__ __u8 p_ir;               /* Input Register */
-  __volatile__ __u16 p_icr;             /* Interrupt Control Register */
-};
-
-/* P_HCR. Time is in increments of SBus clock. */
-#define P_HCR_TEST      0x8000      /* Allows buried counters to be read */
-#define P_HCR_DSW       0x7f00      /* Data strobe width (in ticks) */
-#define P_HCR_DDS       0x007f      /* Data setup before strobe (in ticks) */
-
-/* P_OCR. */
-#define P_OCR_MEM_CLR   0x8000
-#define P_OCR_DATA_SRC  0x4000      /* )                  */
-#define P_OCR_DS_DSEL   0x2000      /* )  Bidirectional      */
-#define P_OCR_BUSY_DSEL 0x1000      /* )    selects            */
-#define P_OCR_ACK_DSEL  0x0800      /* )                  */
-#define P_OCR_EN_DIAG   0x0400
-#define P_OCR_BUSY_OP   0x0200      /* Busy operation */
-#define P_OCR_ACK_OP    0x0100      /* Ack operation */
-#define P_OCR_SRST      0x0080      /* Reset state machines. Not selfcleaning. */
-#define P_OCR_IDLE      0x0008      /* PP data transfer state machine is idle */
-#define P_OCR_V_ILCK    0x0002      /* Versatec faded. Zebra only. */
-#define P_OCR_EN_VER    0x0001      /* Enable Versatec (0 - enable). Zebra only. */
-
-/* P_TCR */
-#define P_TCR_DIR       0x08
-#define P_TCR_BUSY      0x04
-#define P_TCR_ACK       0x02
-#define P_TCR_DS        0x01        /* Strobe */
-
-/* P_OR */
-#define P_OR_V3         0x20        /* )                 */
-#define P_OR_V2         0x10        /* ) on Zebra only   */
-#define P_OR_V1         0x08        /* )                 */
-#define P_OR_INIT       0x04
-#define P_OR_AFXN       0x02        /* Auto Feed */
-#define P_OR_SLCT_IN    0x01
-
-/* P_IR */
-#define P_IR_PE         0x04
-#define P_IR_SLCT       0x02
-#define P_IR_ERR        0x01
-
-/* P_ICR */
-#define P_DS_IRQ        0x8000      /* RW1  */
-#define P_ACK_IRQ       0x4000      /* RW1  */
-#define P_BUSY_IRQ      0x2000      /* RW1  */
-#define P_PE_IRQ        0x1000      /* RW1  */
-#define P_SLCT_IRQ      0x0800      /* RW1  */
-#define P_ERR_IRQ       0x0400      /* RW1  */
-#define P_DS_IRQ_EN     0x0200      /* RW   Always on rising edge */
-#define P_ACK_IRQ_EN    0x0100      /* RW   Always on rising edge */
-#define P_BUSY_IRP      0x0080      /* RW   1= rising edge */
-#define P_BUSY_IRQ_EN   0x0040      /* RW   */
-#define P_PE_IRP        0x0020      /* RW   1= rising edge */
-#define P_PE_IRQ_EN     0x0010      /* RW   */
-#define P_SLCT_IRP      0x0008      /* RW   1= rising edge */
-#define P_SLCT_IRQ_EN   0x0004      /* RW   */
-#define P_ERR_IRP       0x0002      /* RW1  1= rising edge */
-#define P_ERR_IRQ_EN    0x0001      /* RW   */
-
-#endif /* !(_ASM_SPARC_SUNBPP_H) */
diff --git a/include/asm-sparc/system.h b/include/asm-sparc/system.h
deleted file mode 100644
index 15e2a3bc4f61..000000000000
--- a/include/asm-sparc/system.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_SYSTEM_H
-#define ___ASM_SPARC_SYSTEM_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/system_64.h>
-#else
-#include <asm-sparc/system_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/thread_info.h b/include/asm-sparc/thread_info.h
deleted file mode 100644
index 64155cf89f37..000000000000
--- a/include/asm-sparc/thread_info.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_THREAD_INFO_H
-#define ___ASM_SPARC_THREAD_INFO_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/thread_info_64.h>
-#else
-#include <asm-sparc/thread_info_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/thread_info_32.h b/include/asm-sparc/thread_info_32.h
deleted file mode 100644
index 2cf9db044055..000000000000
--- a/include/asm-sparc/thread_info_32.h
+++ /dev/null
@@ -1,153 +0,0 @@
-/*
- * thread_info.h: sparc low-level thread information
- * adapted from the ppc version by Pete Zaitcev, which was
- * adapted from the i386 version by Paul Mackerras
- *
- * Copyright (C) 2002  David Howells (dhowells@redhat.com)
- * Copyright (c) 2002  Pete Zaitcev (zaitcev@yahoo.com)
- * - Incorporating suggestions made by Linus Torvalds and Dave Miller
- */
-
-#ifndef _ASM_THREAD_INFO_H
-#define _ASM_THREAD_INFO_H
-
-#ifdef __KERNEL__
-
-#ifndef __ASSEMBLY__
-
-#include <asm/btfixup.h>
-#include <asm/ptrace.h>
-#include <asm/page.h>
-
-/*
- * Low level task data.
- *
- * If you change this, change the TI_* offsets below to match.
- */
-#define NSWINS 8
-struct thread_info {
-        unsigned long           uwinmask;
-        struct task_struct      *task;          /* main task structure */
-        struct exec_domain      *exec_domain;   /* execution domain */
-        unsigned long           flags;          /* low level flags */
-        int                     cpu;            /* cpu we're on */
-        int                     preempt_count;  /* 0 => preemptable,
-                                                   <0 => BUG */
-        int                     softirq_count;
-        int                     hardirq_count;
-
-        /* Context switch saved kernel state. */
-        unsigned long ksp;      /* ... ksp __attribute__ ((aligned (8))); */
-        unsigned long kpc;
-        unsigned long kpsr;
-        unsigned long kwim;
-
-        /* A place to store user windows and stack pointers
-         * when the stack needs inspection.
-         */
-        struct reg_window       reg_window[NSWINS];     /* align for ldd! */
-        unsigned long           rwbuf_stkptrs[NSWINS];
-        unsigned long           w_saved;
-
-        struct restart_block    restart_block;
-};
-
-/*
- * macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
- */
-#define INIT_THREAD_INFO(tsk)                           \
-{                                                       \
-        .uwinmask       =       0,                      \
-        .task           =       &tsk,                   \
-        .exec_domain    =       &default_exec_domain,   \
-        .flags          =       0,                      \
-        .cpu            =       0,                      \
-        .preempt_count  =       1,                      \
-        .restart_block  = {                             \
-                .fn     =       do_no_restart_syscall,  \
-        },                                              \
-}
-
-#define init_thread_info        (init_thread_union.thread_info)
-#define init_stack              (init_thread_union.stack)
-
-/* how to get the thread information struct from C */
-register struct thread_info *current_thread_info_reg asm("g6");
-#define current_thread_info()   (current_thread_info_reg)
-
-/*
- * thread information allocation
- */
-#if PAGE_SHIFT == 13
-#define THREAD_INFO_ORDER  0
-#else /* PAGE_SHIFT */
-#define THREAD_INFO_ORDER  1
-#endif
-
-#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
-
-BTFIXUPDEF_CALL(struct thread_info *, alloc_thread_info, void)
-#define alloc_thread_info(tsk) BTFIXUP_CALL(alloc_thread_info)()
-
-BTFIXUPDEF_CALL(void, free_thread_info, struct thread_info *)
-#define free_thread_info(ti) BTFIXUP_CALL(free_thread_info)(ti)
-
-#endif /* __ASSEMBLY__ */
-
-/*
- * Size of kernel stack for each process.
- * Observe the order of get_free_pages() in alloc_thread_info().
- * The sun4 has 8K stack too, because it's short on memory, and 16K is a waste.
- */
-#define THREAD_SIZE             8192
-
-/*
- * Offsets in thread_info structure, used in assembly code
- * The "#define REGWIN_SZ 0x40" was abolished, so no multiplications.
- */
-#define TI_UWINMASK     0x00    /* uwinmask */
-#define TI_TASK         0x04
-#define TI_EXECDOMAIN   0x08    /* exec_domain */
-#define TI_FLAGS        0x0c
-#define TI_CPU          0x10
-#define TI_PREEMPT      0x14    /* preempt_count */
-#define TI_SOFTIRQ      0x18    /* softirq_count */
-#define TI_HARDIRQ      0x1c    /* hardirq_count */
-#define TI_KSP          0x20    /* ksp */
-#define TI_KPC          0x24    /* kpc (ldd'ed with kpc) */
-#define TI_KPSR         0x28    /* kpsr */
-#define TI_KWIM         0x2c    /* kwim (ldd'ed with kpsr) */
-#define TI_REG_WINDOW   0x30
-#define TI_RWIN_SPTRS   0x230
-#define TI_W_SAVED      0x250
-/* #define TI_RESTART_BLOCK 0x25n */ /* Nobody cares */
-
-#define PREEMPT_ACTIVE          0x4000000
-
-/*
- * thread information flag bit numbers
- */
-#define TIF_SYSCALL_TRACE       0       /* syscall trace active */
-/* flag bit 1 is available */
-#define TIF_SIGPENDING          2       /* signal pending */
-#define TIF_NEED_RESCHED        3       /* rescheduling necessary */
-#define TIF_RESTORE_SIGMASK     4       /* restore signal mask in do_signal() */
-#define TIF_USEDFPU             8       /* FPU was used by this task
-                                         * this quantum (SMP) */
-#define TIF_POLLING_NRFLAG      9       /* true if poll_idle() is polling
-                                         * TIF_NEED_RESCHED */
-#define TIF_MEMDIE              10
-
-/* as above, but as bit values */
-#define _TIF_SYSCALL_TRACE      (1<<TIF_SYSCALL_TRACE)
-#define _TIF_SIGPENDING         (1<<TIF_SIGPENDING)
-#define _TIF_NEED_RESCHED       (1<<TIF_NEED_RESCHED)
-#define _TIF_RESTORE_SIGMASK    (1<<TIF_RESTORE_SIGMASK)
-#define _TIF_USEDFPU            (1<<TIF_USEDFPU)
-#define _TIF_POLLING_NRFLAG     (1<<TIF_POLLING_NRFLAG)
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_THREAD_INFO_H */
diff --git a/include/asm-sparc/thread_info_64.h b/include/asm-sparc/thread_info_64.h
deleted file mode 100644
index 960969d5ad06..000000000000
--- a/include/asm-sparc/thread_info_64.h
+++ /dev/null
@@ -1,279 +0,0 @@
-/* thread_info.h: sparc64 low-level thread information
- *
- * Copyright (C) 2002  David S. Miller (davem@redhat.com)
- */
-
-#ifndef _ASM_THREAD_INFO_H
-#define _ASM_THREAD_INFO_H
-
-#ifdef __KERNEL__
-
-#define NSWINS          7
-
-#define TI_FLAG_BYTE_FAULT_CODE         0
-#define TI_FLAG_FAULT_CODE_SHIFT        56
-#define TI_FLAG_BYTE_WSTATE             1
-#define TI_FLAG_WSTATE_SHIFT            48
-#define TI_FLAG_BYTE_CWP                2
-#define TI_FLAG_CWP_SHIFT               40
-#define TI_FLAG_BYTE_CURRENT_DS         3
-#define TI_FLAG_CURRENT_DS_SHIFT        32
-#define TI_FLAG_BYTE_FPDEPTH            4
-#define TI_FLAG_FPDEPTH_SHIFT           24
-#define TI_FLAG_BYTE_WSAVED             5
-#define TI_FLAG_WSAVED_SHIFT            16
-
-#include <asm/page.h>
-
-#ifndef __ASSEMBLY__
-
-#include <asm/ptrace.h>
-#include <asm/types.h>
-
-struct task_struct;
-struct exec_domain;
-
-struct thread_info {
-        /* D$ line 1 */
-        struct task_struct      *task;
-        unsigned long           flags;
-        __u8                    fpsaved[7];
-        __u8                    status;
-        unsigned long           ksp;
-
-        /* D$ line 2 */
-        unsigned long           fault_address;
-        struct pt_regs          *kregs;
-        struct exec_domain      *exec_domain;
-        int                     preempt_count;  /* 0 => preemptable, <0 => BUG */
-        __u8                    new_child;
-        __u8                    syscall_noerror;
-        __u16                   cpu;
-
-        unsigned long           *utraps;
-
-        struct reg_window       reg_window[NSWINS];
-        unsigned long           rwbuf_stkptrs[NSWINS];
-
-        unsigned long           gsr[7];
-        unsigned long           xfsr[7];
-
-        __u64                   __user *user_cntd0;
-        __u64                   __user *user_cntd1;
-        __u64                   kernel_cntd0, kernel_cntd1;
-        __u64                   pcr_reg;
-
-        struct restart_block    restart_block;
-
-        struct pt_regs          *kern_una_regs;
-        unsigned int            kern_una_insn;
-
-        unsigned long           fpregs[0] __attribute__ ((aligned(64)));
-};
-
-#endif /* !(__ASSEMBLY__) */
-
-/* offsets into the thread_info struct for assembly code access */
-#define TI_TASK         0x00000000
-#define TI_FLAGS        0x00000008
-#define TI_FAULT_CODE   (TI_FLAGS + TI_FLAG_BYTE_FAULT_CODE)
-#define TI_WSTATE       (TI_FLAGS + TI_FLAG_BYTE_WSTATE)
-#define TI_CWP          (TI_FLAGS + TI_FLAG_BYTE_CWP)
-#define TI_CURRENT_DS   (TI_FLAGS + TI_FLAG_BYTE_CURRENT_DS)
-#define TI_FPDEPTH      (TI_FLAGS + TI_FLAG_BYTE_FPDEPTH)
-#define TI_WSAVED       (TI_FLAGS + TI_FLAG_BYTE_WSAVED)
-#define TI_FPSAVED      0x00000010
-#define TI_KSP          0x00000018
-#define TI_FAULT_ADDR   0x00000020
-#define TI_KREGS        0x00000028
-#define TI_EXEC_DOMAIN  0x00000030
-#define TI_PRE_COUNT    0x00000038
-#define TI_NEW_CHILD    0x0000003c
-#define TI_SYS_NOERROR  0x0000003d
-#define TI_CPU          0x0000003e
-#define TI_UTRAPS       0x00000040
-#define TI_REG_WINDOW   0x00000048
-#define TI_RWIN_SPTRS   0x000003c8
-#define TI_GSR          0x00000400
-#define TI_XFSR         0x00000438
-#define TI_USER_CNTD0   0x00000470
-#define TI_USER_CNTD1   0x00000478
-#define TI_KERN_CNTD0   0x00000480
-#define TI_KERN_CNTD1   0x00000488
-#define TI_PCR          0x00000490
-#define TI_RESTART_BLOCK 0x00000498
-#define TI_KUNA_REGS    0x000004c0
-#define TI_KUNA_INSN    0x000004c8
-#define TI_FPREGS       0x00000500
-
-/* We embed this in the uppermost byte of thread_info->flags */
-#define FAULT_CODE_WRITE        0x01    /* Write access, implies D-TLB     */
-#define FAULT_CODE_DTLB         0x02    /* Miss happened in D-TLB          */
-#define FAULT_CODE_ITLB         0x04    /* Miss happened in I-TLB          */
-#define FAULT_CODE_WINFIXUP     0x08    /* Miss happened during spill/fill */
-#define FAULT_CODE_BLKCOMMIT    0x10    /* Use blk-commit ASI in copy_page */
-
-#if PAGE_SHIFT == 13
-#define THREAD_SIZE (2*PAGE_SIZE)
-#define THREAD_SHIFT (PAGE_SHIFT + 1)
-#else /* PAGE_SHIFT == 13 */
-#define THREAD_SIZE PAGE_SIZE
-#define THREAD_SHIFT PAGE_SHIFT
-#endif /* PAGE_SHIFT == 13 */
-
-#define PREEMPT_ACTIVE          0x4000000
-
-/*
- * macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
- */
-#ifndef __ASSEMBLY__
-
-#define INIT_THREAD_INFO(tsk)                           \
-{                                                       \
-        .task           =       &tsk,                   \
-        .flags          = ((unsigned long)ASI_P) << TI_FLAG_CURRENT_DS_SHIFT,   \
-        .exec_domain    =       &default_exec_domain,   \
-        .preempt_count  =       1,                      \
-        .restart_block  = {                             \
-                .fn     =       do_no_restart_syscall,  \
-        },                                              \
-}
-
-#define init_thread_info        (init_thread_union.thread_info)
-#define init_stack              (init_thread_union.stack)
-
-/* how to get the thread information struct from C */
-register struct thread_info *current_thread_info_reg asm("g6");
-#define current_thread_info()   (current_thread_info_reg)
-
-/* thread information allocation */
-#if PAGE_SHIFT == 13
-#define __THREAD_INFO_ORDER     1
-#else /* PAGE_SHIFT == 13 */
-#define __THREAD_INFO_ORDER     0
-#endif /* PAGE_SHIFT == 13 */
-
-#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
-
-#ifdef CONFIG_DEBUG_STACK_USAGE
-#define alloc_thread_info(tsk)                                  \
-({                                                              \
-        struct thread_info *ret;                                \
-                                                                \
-        ret = (struct thread_info *)                            \
-          __get_free_pages(GFP_KERNEL, __THREAD_INFO_ORDER);    \
-        if (ret)                                                \
-                memset(ret, 0, PAGE_SIZE<<__THREAD_INFO_ORDER); \
-        ret;                                                    \
-})
-#else
-#define alloc_thread_info(tsk) \
-        ((struct thread_info *)__get_free_pages(GFP_KERNEL, __THREAD_INFO_ORDER))
-#endif
-
-#define free_thread_info(ti) \
-        free_pages((unsigned long)(ti),__THREAD_INFO_ORDER)
-
-#define __thread_flag_byte_ptr(ti)      \
-        ((unsigned char *)(&((ti)->flags)))
-#define __cur_thread_flag_byte_ptr      __thread_flag_byte_ptr(current_thread_info())
-
-#define get_thread_fault_code()         (__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_FAULT_CODE])
-#define set_thread_fault_code(val)      (__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_FAULT_CODE] = (val))
-#define get_thread_wstate()             (__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_WSTATE])
-#define set_thread_wstate(val)          (__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_WSTATE] = (val))
-#define get_thread_cwp()                (__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_CWP])
-#define set_thread_cwp(val)             (__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_CWP] = (val))
-#define get_thread_current_ds()         (__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_CURRENT_DS])
-#define set_thread_current_ds(val)      (__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_CURRENT_DS] = (val))
-#define get_thread_fpdepth()            (__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_FPDEPTH])
-#define set_thread_fpdepth(val)         (__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_FPDEPTH] = (val))
-#define get_thread_wsaved()             (__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_WSAVED])
-#define set_thread_wsaved(val)          (__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_WSAVED] = (val))
-
-#endif /* !(__ASSEMBLY__) */
-
-/*
- * Thread information flags, only 16 bits are available as we encode
- * other values into the upper 6 bytes.
- *
- * On trap return we need to test several values:
- *
- * user:        need_resched, notify_resume, sigpending, wsaved, perfctr
- * kernel:      fpdepth
- *
- * So to check for work in the kernel case we simply load the fpdepth
- * byte out of the flags and test it.  For the user case we encode the
- * lower 3 bytes of flags as follows:
- *      ----------------------------------------
- *      | wsaved | flags byte 1 | flags byte 2 |
- *      ----------------------------------------
- * This optimizes the user test into:
- *      ldx             [%g6 + TI_FLAGS], REG1
- *      sethi           %hi(_TIF_USER_WORK_MASK), REG2
- *      or              REG2, %lo(_TIF_USER_WORK_MASK), REG2
- *      andcc           REG1, REG2, %g0
- *      be,pt           no_work_to_do
- *       nop
- */
-#define TIF_SYSCALL_TRACE       0       /* syscall trace active */
-/* flags bit 1 is available */
-#define TIF_SIGPENDING          2       /* signal pending */
-#define TIF_NEED_RESCHED        3       /* rescheduling necessary */
-#define TIF_PERFCTR             4       /* performance counters active */
-#define TIF_UNALIGNED           5       /* allowed to do unaligned accesses */
-/* flag bit 6 is available */
-#define TIF_32BIT               7       /* 32-bit binary */
-/* flag bit 8 is available */
-#define TIF_SECCOMP             9       /* secure computing */
-#define TIF_SYSCALL_AUDIT       10      /* syscall auditing active */
-/* flag bit 11 is available */
-/* NOTE: Thread flags >= 12 should be ones we have no interest
- *       in using in assembly, else we can't use the mask as
- *       an immediate value in instructions such as andcc.
- */
-#define TIF_ABI_PENDING         12
-#define TIF_MEMDIE              13
-#define TIF_POLLING_NRFLAG      14
-
-#define _TIF_SYSCALL_TRACE      (1<<TIF_SYSCALL_TRACE)
-#define _TIF_SIGPENDING         (1<<TIF_SIGPENDING)
-#define _TIF_NEED_RESCHED       (1<<TIF_NEED_RESCHED)
-#define _TIF_PERFCTR            (1<<TIF_PERFCTR)
-#define _TIF_UNALIGNED          (1<<TIF_UNALIGNED)
-#define _TIF_32BIT              (1<<TIF_32BIT)
-#define _TIF_SECCOMP            (1<<TIF_SECCOMP)
-#define _TIF_SYSCALL_AUDIT      (1<<TIF_SYSCALL_AUDIT)
-#define _TIF_ABI_PENDING        (1<<TIF_ABI_PENDING)
-#define _TIF_POLLING_NRFLAG     (1<<TIF_POLLING_NRFLAG)
-
-#define _TIF_USER_WORK_MASK     ((0xff << TI_FLAG_WSAVED_SHIFT) | \
-                                 (_TIF_SIGPENDING | \
-                                  _TIF_NEED_RESCHED | _TIF_PERFCTR))
-
-/*
- * Thread-synchronous status.
- *
- * This is different from the flags in that nobody else
- * ever touches our thread-synchronous status, so we don't
- * have to worry about atomic accesses.
- *
- * Note that there are only 8 bits available.
- */
-#define TS_RESTORE_SIGMASK      0x0001  /* restore signal mask in do_signal() */
-
-#ifndef __ASSEMBLY__
-#define HAVE_SET_RESTORE_SIGMASK        1
-static inline void set_restore_sigmask(void)
-{
-        struct thread_info *ti = current_thread_info();
-        ti->status |= TS_RESTORE_SIGMASK;
-        set_bit(TIF_SIGPENDING, &ti->flags);
-}
-#endif  /* !__ASSEMBLY__ */
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_THREAD_INFO_H */
diff --git a/include/asm-sparc/timer.h b/include/asm-sparc/timer.h
deleted file mode 100644
index 475baa05a96e..000000000000
--- a/include/asm-sparc/timer.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_TIMER_H
-#define ___ASM_SPARC_TIMER_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/timer_64.h>
-#else
-#include <asm-sparc/timer_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/timex.h b/include/asm-sparc/timex.h
deleted file mode 100644
index 01d9f199d452..000000000000
--- a/include/asm-sparc/timex.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_TIMEX_H
-#define ___ASM_SPARC_TIMEX_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/timex_64.h>
-#else
-#include <asm-sparc/timex_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/timex_32.h b/include/asm-sparc/timex_32.h
deleted file mode 100644
index 71b45c90ccae..000000000000
--- a/include/asm-sparc/timex_32.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * linux/include/asm-sparc/timex.h
- *
- * sparc architecture timex specifications
- */
-#ifndef _ASMsparc_TIMEX_H
-#define _ASMsparc_TIMEX_H
-
-#define CLOCK_TICK_RATE 1193180 /* Underlying HZ */
-
-/* XXX Maybe do something better at some point... -DaveM */
-typedef unsigned long cycles_t;
-#define get_cycles()    (0)
-
-#endif
diff --git a/include/asm-sparc/timex_64.h b/include/asm-sparc/timex_64.h
deleted file mode 100644
index c622535c4560..000000000000
--- a/include/asm-sparc/timex_64.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * linux/include/asm-sparc64/timex.h
- *
- * sparc64 architecture timex specifications
- */
-#ifndef _ASMsparc64_TIMEX_H
-#define _ASMsparc64_TIMEX_H
-
-#include <asm/timer.h>
-
-#define CLOCK_TICK_RATE 1193180 /* Underlying HZ */
-
-/* Getting on the cycle counter on sparc64. */
-typedef unsigned long cycles_t;
-#define get_cycles()    tick_ops->get_tick()
-
-#define ARCH_HAS_READ_CURRENT_TIMER
-
-#endif
diff --git a/include/asm-sparc/tlb.h b/include/asm-sparc/tlb.h
deleted file mode 100644
index a821057327c4..000000000000
--- a/include/asm-sparc/tlb.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_TLB_H
-#define ___ASM_SPARC_TLB_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/tlb_64.h>
-#else
-#include <asm-sparc/tlb_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/tlbflush.h b/include/asm-sparc/tlbflush.h
deleted file mode 100644
index 6e6bc12227b8..000000000000
--- a/include/asm-sparc/tlbflush.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_TLBFLUSH_H
-#define ___ASM_SPARC_TLBFLUSH_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/tlbflush_64.h>
-#else
-#include <asm-sparc/tlbflush_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/topology.h b/include/asm-sparc/topology.h
deleted file mode 100644
index ed13630f32e2..000000000000
--- a/include/asm-sparc/topology.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_TOPOLOGY_H
-#define ___ASM_SPARC_TOPOLOGY_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/topology_64.h>
-#else
-#include <asm-sparc/topology_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/uaccess.h b/include/asm-sparc/uaccess.h
deleted file mode 100644
index 424facce5238..000000000000
--- a/include/asm-sparc/uaccess.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_UACCESS_H
-#define ___ASM_SPARC_UACCESS_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/uaccess_64.h>
-#else
-#include <asm-sparc/uaccess_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/unistd.h b/include/asm-sparc/unistd.h
deleted file mode 100644
index 3c2609618a09..000000000000
--- a/include/asm-sparc/unistd.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_UNISTD_H
-#define ___ASM_SPARC_UNISTD_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/unistd_64.h>
-#else
-#include <asm-sparc/unistd_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/utrap.h b/include/asm-sparc/utrap.h
deleted file mode 100644
index 9da37babbe5b..000000000000
--- a/include/asm-sparc/utrap.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * include/asm-sparc64/utrap.h
- *
- * Copyright (C) 1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
- */
-
-#ifndef __ASM_SPARC64_UTRAP_H
-#define __ASM_SPARC64_UTRAP_H
-
-#define UT_INSTRUCTION_EXCEPTION                1
-#define UT_INSTRUCTION_ERROR                    2
-#define UT_INSTRUCTION_PROTECTION               3
-#define UT_ILLTRAP_INSTRUCTION                  4
-#define UT_ILLEGAL_INSTRUCTION                  5
-#define UT_PRIVILEGED_OPCODE                    6
-#define UT_FP_DISABLED                          7
-#define UT_FP_EXCEPTION_IEEE_754                8
-#define UT_FP_EXCEPTION_OTHER                   9
-#define UT_TAG_OVERVIEW                         10
-#define UT_DIVISION_BY_ZERO                     11
-#define UT_DATA_EXCEPTION                       12
-#define UT_DATA_ERROR                           13
-#define UT_DATA_PROTECTION                      14
-#define UT_MEM_ADDRESS_NOT_ALIGNED              15
-#define UT_PRIVILEGED_ACTION                    16
-#define UT_ASYNC_DATA_ERROR                     17
-#define UT_TRAP_INSTRUCTION_16                  18
-#define UT_TRAP_INSTRUCTION_17                  19
-#define UT_TRAP_INSTRUCTION_18                  20
-#define UT_TRAP_INSTRUCTION_19                  21
-#define UT_TRAP_INSTRUCTION_20                  22
-#define UT_TRAP_INSTRUCTION_21                  23
-#define UT_TRAP_INSTRUCTION_22                  24
-#define UT_TRAP_INSTRUCTION_23                  25
-#define UT_TRAP_INSTRUCTION_24                  26
-#define UT_TRAP_INSTRUCTION_25                  27
-#define UT_TRAP_INSTRUCTION_26                  28
-#define UT_TRAP_INSTRUCTION_27                  29
-#define UT_TRAP_INSTRUCTION_28                  30
-#define UT_TRAP_INSTRUCTION_29                  31
-#define UT_TRAP_INSTRUCTION_30                  32
-#define UT_TRAP_INSTRUCTION_31                  33
-
-#define UTH_NOCHANGE                            (-1)
-
-#ifndef __ASSEMBLY__
-typedef int utrap_entry_t;
-typedef void *utrap_handler_t;
-#endif /* __ASSEMBLY__ */
-
-#endif /* !(__ASM_SPARC64_PROCESSOR_H) */
diff --git a/include/asm-sparc/vaddrs.h b/include/asm-sparc/vaddrs.h
deleted file mode 100644
index a22fed5a3c6b..000000000000
--- a/include/asm-sparc/vaddrs.h
+++ /dev/null
@@ -1,64 +0,0 @@
-#ifndef _SPARC_VADDRS_H
-#define _SPARC_VADDRS_H
-
-#include <asm/head.h>
-
-/*
- * asm-sparc/vaddrs.h:  Here we define the virtual addresses at
- *                      which important things will be mapped.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- * Copyright (C) 2000 Anton Blanchard (anton@samba.org)
- */
-
-#define SRMMU_MAXMEM            0x0c000000
-
-#define SRMMU_NOCACHE_VADDR     (KERNBASE + SRMMU_MAXMEM)
-                                /* = 0x0fc000000 */
-/* XXX Empiricals - this needs to go away - KMW */
-#define SRMMU_MIN_NOCACHE_PAGES (550)
-#define SRMMU_MAX_NOCACHE_PAGES (1280)
-
-/* The following constant is used in mm/srmmu.c::srmmu_nocache_calcsize()
- * to determine the amount of memory that will be reserved as nocache:
- *
- * 256 pages will be taken as nocache per each
- * SRMMU_NOCACHE_ALCRATIO MB of system memory.
- *
- * limits enforced:     nocache minimum = 256 pages
- *                      nocache maximum = 1280 pages
- */
-#define SRMMU_NOCACHE_ALCRATIO  64      /* 256 pages per 64MB of system RAM */
-
-#define SUN4M_IOBASE_VADDR      0xfd000000 /* Base for mapping pages */
-#define IOBASE_VADDR            0xfe000000
-#define IOBASE_END              0xfe600000
-
-/*
- * On the sun4/4c we need a place
- * to reliably map locked down kernel data.  This includes the
- * task_struct and kernel stack pages of each process plus the
- * scsi buffers during dvma IO transfers, also the floppy buffers
- * during pseudo dma which runs with traps off (no faults allowed).
- * Some quick calculations yield:
- *       NR_TASKS <512> * (3 * PAGE_SIZE) == 0x600000
- * Subtract this from 0xc00000 and you get 0x927C0 of vm left
- * over to map SCSI dvma + floppy pseudo-dma buffers.  So be
- * careful if you change NR_TASKS or else there won't be enough
- * room for it all.
- */
-#define SUN4C_LOCK_VADDR        0xff000000
-#define SUN4C_LOCK_END          0xffc00000
-
-#define KADB_DEBUGGER_BEGVM     0xffc00000 /* Where kern debugger is in virt-mem */
-#define KADB_DEBUGGER_ENDVM     0xffd00000
-#define DEBUG_FIRSTVADDR        KADB_DEBUGGER_BEGVM
-#define DEBUG_LASTVADDR         KADB_DEBUGGER_ENDVM
-
-#define LINUX_OPPROM_BEGVM      0xffd00000
-#define LINUX_OPPROM_ENDVM      0xfff00000
-
-#define DVMA_VADDR              0xfff00000 /* Base area of the DVMA on suns */
-#define DVMA_END                0xfffc0000
-
-#endif /* !(_SPARC_VADDRS_H) */
diff --git a/include/asm-sparc/xor.h b/include/asm-sparc/xor.h
deleted file mode 100644
index 35089a838c3f..000000000000
--- a/include/asm-sparc/xor.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_XOR_H
-#define ___ASM_SPARC_XOR_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/xor_64.h>
-#else
-#include <asm-sparc/xor_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc/xor_32.h b/include/asm-sparc/xor_32.h
deleted file mode 100644
index f34b2cfa8206..000000000000
--- a/include/asm-sparc/xor_32.h
+++ /dev/null
@@ -1,269 +0,0 @@
-/*
- * include/asm-sparc/xor.h
- *
- * Optimized RAID-5 checksumming functions for 32-bit Sparc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * You should have received a copy of the GNU General Public License
- * (for example /usr/src/linux/COPYING); if not, write to the Free
- * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/*
- * High speed xor_block operation for RAID4/5 utilizing the
- * ldd/std SPARC instructions.
- *
- * Copyright (C) 1999 Jakub Jelinek (jj@ultra.linux.cz)
- */
-
-static void
-sparc_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
-{
-        int lines = bytes / (sizeof (long)) / 8;
-
-        do {
-                __asm__ __volatile__(
-                  "ldd [%0 + 0x00], %%g2\n\t"
-                  "ldd [%0 + 0x08], %%g4\n\t"
-                  "ldd [%0 + 0x10], %%o0\n\t"
-                  "ldd [%0 + 0x18], %%o2\n\t"
-                  "ldd [%1 + 0x00], %%o4\n\t"
-                  "ldd [%1 + 0x08], %%l0\n\t"
-                  "ldd [%1 + 0x10], %%l2\n\t"
-                  "ldd [%1 + 0x18], %%l4\n\t"
-                  "xor %%g2, %%o4, %%g2\n\t"
-                  "xor %%g3, %%o5, %%g3\n\t"
-                  "xor %%g4, %%l0, %%g4\n\t"
-                  "xor %%g5, %%l1, %%g5\n\t"
-                  "xor %%o0, %%l2, %%o0\n\t"
-                  "xor %%o1, %%l3, %%o1\n\t"
-                  "xor %%o2, %%l4, %%o2\n\t"
-                  "xor %%o3, %%l5, %%o3\n\t"
-                  "std %%g2, [%0 + 0x00]\n\t"
-                  "std %%g4, [%0 + 0x08]\n\t"
-                  "std %%o0, [%0 + 0x10]\n\t"
-                  "std %%o2, [%0 + 0x18]\n"
-                :
-                : "r" (p1), "r" (p2)
-                : "g2", "g3", "g4", "g5",
-                  "o0", "o1", "o2", "o3", "o4", "o5",
-                  "l0", "l1", "l2", "l3", "l4", "l5");
-                p1 += 8;
-                p2 += 8;
-        } while (--lines > 0);
-}
-
-static void
-sparc_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-        unsigned long *p3)
-{
-        int lines = bytes / (sizeof (long)) / 8;
-
-        do {
-                __asm__ __volatile__(
-                  "ldd [%0 + 0x00], %%g2\n\t"
-                  "ldd [%0 + 0x08], %%g4\n\t"
-                  "ldd [%0 + 0x10], %%o0\n\t"
-                  "ldd [%0 + 0x18], %%o2\n\t"
-                  "ldd [%1 + 0x00], %%o4\n\t"
-                  "ldd [%1 + 0x08], %%l0\n\t"
-                  "ldd [%1 + 0x10], %%l2\n\t"
-                  "ldd [%1 + 0x18], %%l4\n\t"
-                  "xor %%g2, %%o4, %%g2\n\t"
-                  "xor %%g3, %%o5, %%g3\n\t"
-                  "ldd [%2 + 0x00], %%o4\n\t"
-                  "xor %%g4, %%l0, %%g4\n\t"
-                  "xor %%g5, %%l1, %%g5\n\t"
-                  "ldd [%2 + 0x08], %%l0\n\t"
-                  "xor %%o0, %%l2, %%o0\n\t"
-                  "xor %%o1, %%l3, %%o1\n\t"
-                  "ldd [%2 + 0x10], %%l2\n\t"
-                  "xor %%o2, %%l4, %%o2\n\t"
-                  "xor %%o3, %%l5, %%o3\n\t"
-                  "ldd [%2 + 0x18], %%l4\n\t"
-                  "xor %%g2, %%o4, %%g2\n\t"
-                  "xor %%g3, %%o5, %%g3\n\t"
-                  "xor %%g4, %%l0, %%g4\n\t"
-                  "xor %%g5, %%l1, %%g5\n\t"
-                  "xor %%o0, %%l2, %%o0\n\t"
-                  "xor %%o1, %%l3, %%o1\n\t"
-                  "xor %%o2, %%l4, %%o2\n\t"
-                  "xor %%o3, %%l5, %%o3\n\t"
-                  "std %%g2, [%0 + 0x00]\n\t"
-                  "std %%g4, [%0 + 0x08]\n\t"
-                  "std %%o0, [%0 + 0x10]\n\t"
-                  "std %%o2, [%0 + 0x18]\n"
-                :
-                : "r" (p1), "r" (p2), "r" (p3)
-                : "g2", "g3", "g4", "g5",
-                  "o0", "o1", "o2", "o3", "o4", "o5",
-                  "l0", "l1", "l2", "l3", "l4", "l5");
-                p1 += 8;
-                p2 += 8;
-                p3 += 8;
-        } while (--lines > 0);
-}
-
-static void
-sparc_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-        unsigned long *p3, unsigned long *p4)
-{
-        int lines = bytes / (sizeof (long)) / 8;
-
-        do {
-                __asm__ __volatile__(
-                  "ldd [%0 + 0x00], %%g2\n\t"
-                  "ldd [%0 + 0x08], %%g4\n\t"
-                  "ldd [%0 + 0x10], %%o0\n\t"
-                  "ldd [%0 + 0x18], %%o2\n\t"
-                  "ldd [%1 + 0x00], %%o4\n\t"
-                  "ldd [%1 + 0x08], %%l0\n\t"
-                  "ldd [%1 + 0x10], %%l2\n\t"
-                  "ldd [%1 + 0x18], %%l4\n\t"
-                  "xor %%g2, %%o4, %%g2\n\t"
-                  "xor %%g3, %%o5, %%g3\n\t"
-                  "ldd [%2 + 0x00], %%o4\n\t"
-                  "xor %%g4, %%l0, %%g4\n\t"
-                  "xor %%g5, %%l1, %%g5\n\t"
-                  "ldd [%2 + 0x08], %%l0\n\t"
-                  "xor %%o0, %%l2, %%o0\n\t"
-                  "xor %%o1, %%l3, %%o1\n\t"
-                  "ldd [%2 + 0x10], %%l2\n\t"
-                  "xor %%o2, %%l4, %%o2\n\t"
-                  "xor %%o3, %%l5, %%o3\n\t"
-                  "ldd [%2 + 0x18], %%l4\n\t"
-                  "xor %%g2, %%o4, %%g2\n\t"
-                  "xor %%g3, %%o5, %%g3\n\t"
-                  "ldd [%3 + 0x00], %%o4\n\t"
-                  "xor %%g4, %%l0, %%g4\n\t"
-                  "xor %%g5, %%l1, %%g5\n\t"
-                  "ldd [%3 + 0x08], %%l0\n\t"
-                  "xor %%o0, %%l2, %%o0\n\t"
-                  "xor %%o1, %%l3, %%o1\n\t"
-                  "ldd [%3 + 0x10], %%l2\n\t"
-                  "xor %%o2, %%l4, %%o2\n\t"
-                  "xor %%o3, %%l5, %%o3\n\t"
-                  "ldd [%3 + 0x18], %%l4\n\t"
-                  "xor %%g2, %%o4, %%g2\n\t"
-                  "xor %%g3, %%o5, %%g3\n\t"
-                  "xor %%g4, %%l0, %%g4\n\t"
-                  "xor %%g5, %%l1, %%g5\n\t"
-                  "xor %%o0, %%l2, %%o0\n\t"
-                  "xor %%o1, %%l3, %%o1\n\t"
-                  "xor %%o2, %%l4, %%o2\n\t"
-                  "xor %%o3, %%l5, %%o3\n\t"
-                  "std %%g2, [%0 + 0x00]\n\t"
-                  "std %%g4, [%0 + 0x08]\n\t"
-                  "std %%o0, [%0 + 0x10]\n\t"
-                  "std %%o2, [%0 + 0x18]\n"
-                :
-                : "r" (p1), "r" (p2), "r" (p3), "r" (p4)
-                : "g2", "g3", "g4", "g5",
-                  "o0", "o1", "o2", "o3", "o4", "o5",
-                  "l0", "l1", "l2", "l3", "l4", "l5");
-                p1 += 8;
-                p2 += 8;
-                p3 += 8;
-                p4 += 8;
-        } while (--lines > 0);
-}
-
-static void
-sparc_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-        unsigned long *p3, unsigned long *p4, unsigned long *p5)
-{
-        int lines = bytes / (sizeof (long)) / 8;
-
-        do {
-                __asm__ __volatile__(
-                  "ldd [%0 + 0x00], %%g2\n\t"
-                  "ldd [%0 + 0x08], %%g4\n\t"
-                  "ldd [%0 + 0x10], %%o0\n\t"
-                  "ldd [%0 + 0x18], %%o2\n\t"
-                  "ldd [%1 + 0x00], %%o4\n\t"
-                  "ldd [%1 + 0x08], %%l0\n\t"
-                  "ldd [%1 + 0x10], %%l2\n\t"
-                  "ldd [%1 + 0x18], %%l4\n\t"
-                  "xor %%g2, %%o4, %%g2\n\t"
-                  "xor %%g3, %%o5, %%g3\n\t"
-                  "ldd [%2 + 0x00], %%o4\n\t"
-                  "xor %%g4, %%l0, %%g4\n\t"
-                  "xor %%g5, %%l1, %%g5\n\t"
-                  "ldd [%2 + 0x08], %%l0\n\t"
-                  "xor %%o0, %%l2, %%o0\n\t"
-                  "xor %%o1, %%l3, %%o1\n\t"
-                  "ldd [%2 + 0x10], %%l2\n\t"
-                  "xor %%o2, %%l4, %%o2\n\t"
-                  "xor %%o3, %%l5, %%o3\n\t"
-                  "ldd [%2 + 0x18], %%l4\n\t"
-                  "xor %%g2, %%o4, %%g2\n\t"
-                  "xor %%g3, %%o5, %%g3\n\t"
-                  "ldd [%3 + 0x00], %%o4\n\t"
-                  "xor %%g4, %%l0, %%g4\n\t"
-                  "xor %%g5, %%l1, %%g5\n\t"
-                  "ldd [%3 + 0x08], %%l0\n\t"
-                  "xor %%o0, %%l2, %%o0\n\t"
-                  "xor %%o1, %%l3, %%o1\n\t"
-                  "ldd [%3 + 0x10], %%l2\n\t"
-                  "xor %%o2, %%l4, %%o2\n\t"
-                  "xor %%o3, %%l5, %%o3\n\t"
-                  "ldd [%3 + 0x18], %%l4\n\t"
-                  "xor %%g2, %%o4, %%g2\n\t"
-                  "xor %%g3, %%o5, %%g3\n\t"
-                  "ldd [%4 + 0x00], %%o4\n\t"
-                  "xor %%g4, %%l0, %%g4\n\t"
-                  "xor %%g5, %%l1, %%g5\n\t"
-                  "ldd [%4 + 0x08], %%l0\n\t"
-                  "xor %%o0, %%l2, %%o0\n\t"
-                  "xor %%o1, %%l3, %%o1\n\t"
-                  "ldd [%4 + 0x10], %%l2\n\t"
-                  "xor %%o2, %%l4, %%o2\n\t"
-                  "xor %%o3, %%l5, %%o3\n\t"
-                  "ldd [%4 + 0x18], %%l4\n\t"
-                  "xor %%g2, %%o4, %%g2\n\t"
-                  "xor %%g3, %%o5, %%g3\n\t"
-                  "xor %%g4, %%l0, %%g4\n\t"
-                  "xor %%g5, %%l1, %%g5\n\t"
-                  "xor %%o0, %%l2, %%o0\n\t"
-                  "xor %%o1, %%l3, %%o1\n\t"
-                  "xor %%o2, %%l4, %%o2\n\t"
-                  "xor %%o3, %%l5, %%o3\n\t"
-                  "std %%g2, [%0 + 0x00]\n\t"
-                  "std %%g4, [%0 + 0x08]\n\t"
-                  "std %%o0, [%0 + 0x10]\n\t"
-                  "std %%o2, [%0 + 0x18]\n"
-                :
-                : "r" (p1), "r" (p2), "r" (p3), "r" (p4), "r" (p5)
-                : "g2", "g3", "g4", "g5",
-                  "o0", "o1", "o2", "o3", "o4", "o5",
-                  "l0", "l1", "l2", "l3", "l4", "l5");
-                p1 += 8;
-                p2 += 8;
-                p3 += 8;
-                p4 += 8;
-                p5 += 8;
-        } while (--lines > 0);
-}
-
-static struct xor_block_template xor_block_SPARC = {
-        .name   = "SPARC",
-        .do_2   = sparc_2,
-        .do_3   = sparc_3,
-        .do_4   = sparc_4,
-        .do_5   = sparc_5,
-};
-
-/* For grins, also test the generic routines.  */
-#include <asm-generic/xor.h>
-
-#undef XOR_TRY_TEMPLATES
-#define XOR_TRY_TEMPLATES                               \
-        do {                                            \
-                xor_speed(&xor_block_8regs);            \
-                xor_speed(&xor_block_32regs);           \
-                xor_speed(&xor_block_SPARC);            \
-        } while (0)
diff --git a/include/asm-sparc/xor_64.h b/include/asm-sparc/xor_64.h
deleted file mode 100644
index a0233884fc94..000000000000
--- a/include/asm-sparc/xor_64.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * include/asm-sparc64/xor.h
- *
- * High speed xor_block operation for RAID4/5 utilizing the
- * UltraSparc Visual Instruction Set and Niagara block-init
- * twin-load instructions.
- *
- * Copyright (C) 1997, 1999 Jakub Jelinek (jj@ultra.linux.cz)
- * Copyright (C) 2006 David S. Miller <davem@davemloft.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * You should have received a copy of the GNU General Public License
- * (for example /usr/src/linux/COPYING); if not, write to the Free
- * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <asm/spitfire.h>
-
-extern void xor_vis_2(unsigned long, unsigned long *, unsigned long *);
-extern void xor_vis_3(unsigned long, unsigned long *, unsigned long *,
-                      unsigned long *);
-extern void xor_vis_4(unsigned long, unsigned long *, unsigned long *,
-                      unsigned long *, unsigned long *);
-extern void xor_vis_5(unsigned long, unsigned long *, unsigned long *,
-                      unsigned long *, unsigned long *, unsigned long *);
-
-/* XXX Ugh, write cheetah versions... -DaveM */
-
-static struct xor_block_template xor_block_VIS = {
-        .name   = "VIS",
-        .do_2   = xor_vis_2,
-        .do_3   = xor_vis_3,
-        .do_4   = xor_vis_4,
-        .do_5   = xor_vis_5,
-};
-
-extern void xor_niagara_2(unsigned long, unsigned long *, unsigned long *);
-extern void xor_niagara_3(unsigned long, unsigned long *, unsigned long *,
-                          unsigned long *);
-extern void xor_niagara_4(unsigned long, unsigned long *, unsigned long *,
-                          unsigned long *, unsigned long *);
-extern void xor_niagara_5(unsigned long, unsigned long *, unsigned long *,
-                          unsigned long *, unsigned long *, unsigned long *);
-
-static struct xor_block_template xor_block_niagara = {
-        .name   = "Niagara",
-        .do_2   = xor_niagara_2,
-        .do_3   = xor_niagara_3,
-        .do_4   = xor_niagara_4,
-        .do_5   = xor_niagara_5,
-};
-
-#undef XOR_TRY_TEMPLATES
-#define XOR_TRY_TEMPLATES                               \
-        do {                                            \
-                xor_speed(&xor_block_VIS);              \
-                xor_speed(&xor_block_niagara);          \
-        } while (0)
-
-/* For VIS for everything except Niagara.  */
-#define XOR_SELECT_TEMPLATE(FASTEST) \
-        ((tlb_type == hypervisor && \
-          (sun4v_chip_type == SUN4V_CHIP_NIAGARA1 || \
-           sun4v_chip_type == SUN4V_CHIP_NIAGARA2)) ? \
-         &xor_block_niagara : \
-         &xor_block_VIS)
diff --git a/include/asm-sparc64/Kbuild b/include/asm-sparc64/Kbuild
deleted file mode 100644
index 6cdaf9d33b38..000000000000
--- a/include/asm-sparc64/Kbuild
+++ /dev/null
@@ -1 +0,0 @@
-# dummy file to avoid breaking make headers_install
diff --git a/include/asm-sparc64/agp.h b/include/asm-sparc64/agp.h
deleted file mode 100644
index eb8d4b3f5163..000000000000
--- a/include/asm-sparc64/agp.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/agp.h>
diff --git a/include/asm-sparc64/apb.h b/include/asm-sparc64/apb.h
deleted file mode 100644
index 5e236ca6e492..000000000000
--- a/include/asm-sparc64/apb.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/apb.h>
diff --git a/include/asm-sparc64/asi.h b/include/asm-sparc64/asi.h
deleted file mode 100644
index 9b7110c516e8..000000000000
--- a/include/asm-sparc64/asi.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/asi.h>
diff --git a/include/asm-sparc64/atomic.h b/include/asm-sparc64/atomic.h
deleted file mode 100644
index f5126826ba34..000000000000
--- a/include/asm-sparc64/atomic.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/atomic.h>
diff --git a/include/asm-sparc64/auxio.h b/include/asm-sparc64/auxio.h
deleted file mode 100644
index 46c9042f30b4..000000000000
--- a/include/asm-sparc64/auxio.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/auxio.h>
diff --git a/include/asm-sparc64/auxvec.h b/include/asm-sparc64/auxvec.h
deleted file mode 100644
index 1f45c67d7316..000000000000
--- a/include/asm-sparc64/auxvec.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/auxvec.h>
diff --git a/include/asm-sparc64/backoff.h b/include/asm-sparc64/backoff.h
deleted file mode 100644
index 8ee26d947e0e..000000000000
--- a/include/asm-sparc64/backoff.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/backoff.h>
diff --git a/include/asm-sparc64/bbc.h b/include/asm-sparc64/bbc.h
deleted file mode 100644
index 06e8b6306514..000000000000
--- a/include/asm-sparc64/bbc.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/bbc.h>
diff --git a/include/asm-sparc64/bitops.h b/include/asm-sparc64/bitops.h
deleted file mode 100644
index 204404355bdd..000000000000
--- a/include/asm-sparc64/bitops.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/bitops.h>
diff --git a/include/asm-sparc64/bpp.h b/include/asm-sparc64/bpp.h
deleted file mode 100644
index 514eee20272e..000000000000
--- a/include/asm-sparc64/bpp.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/bpp.h>
diff --git a/include/asm-sparc64/bug.h b/include/asm-sparc64/bug.h
deleted file mode 100644
index 3433737c7a67..000000000000
--- a/include/asm-sparc64/bug.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/bug.h>
diff --git a/include/asm-sparc64/bugs.h b/include/asm-sparc64/bugs.h
deleted file mode 100644
index 04ae9e2818cf..000000000000
--- a/include/asm-sparc64/bugs.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/bugs.h>
diff --git a/include/asm-sparc64/byteorder.h b/include/asm-sparc64/byteorder.h
deleted file mode 100644
index f672855bee17..000000000000
--- a/include/asm-sparc64/byteorder.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/byteorder.h>
diff --git a/include/asm-sparc64/cache.h b/include/asm-sparc64/cache.h
deleted file mode 100644
index fa9de5cadbf1..000000000000
--- a/include/asm-sparc64/cache.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/cache.h>
diff --git a/include/asm-sparc64/cacheflush.h b/include/asm-sparc64/cacheflush.h
deleted file mode 100644
index cf5b6b3e8a55..000000000000
--- a/include/asm-sparc64/cacheflush.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/cacheflush.h>
diff --git a/include/asm-sparc64/chafsr.h b/include/asm-sparc64/chafsr.h
deleted file mode 100644
index aaab97562a39..000000000000
--- a/include/asm-sparc64/chafsr.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/chafsr.h>
diff --git a/include/asm-sparc64/checksum.h b/include/asm-sparc64/checksum.h
deleted file mode 100644
index c3966c5e29d8..000000000000
--- a/include/asm-sparc64/checksum.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/checksum.h>
diff --git a/include/asm-sparc64/chmctrl.h b/include/asm-sparc64/chmctrl.h
deleted file mode 100644
index eb757b483b30..000000000000
--- a/include/asm-sparc64/chmctrl.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/chmctrl.h>
diff --git a/include/asm-sparc64/cmt.h b/include/asm-sparc64/cmt.h
deleted file mode 100644
index b19b445cb810..000000000000
--- a/include/asm-sparc64/cmt.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/cmt.h>
diff --git a/include/asm-sparc64/compat.h b/include/asm-sparc64/compat.h
deleted file mode 100644
index 8c155d221952..000000000000
--- a/include/asm-sparc64/compat.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/compat.h>
diff --git a/include/asm-sparc64/compat_signal.h b/include/asm-sparc64/compat_signal.h
deleted file mode 100644
index 7187dcc8cac7..000000000000
--- a/include/asm-sparc64/compat_signal.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/compat_signal.h>
diff --git a/include/asm-sparc64/cpudata.h b/include/asm-sparc64/cpudata.h
deleted file mode 100644
index 3220e134a579..000000000000
--- a/include/asm-sparc64/cpudata.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/cpudata.h>
diff --git a/include/asm-sparc64/cputime.h b/include/asm-sparc64/cputime.h
deleted file mode 100644
index 435f37a92f7c..000000000000
--- a/include/asm-sparc64/cputime.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/cputime.h>
diff --git a/include/asm-sparc64/current.h b/include/asm-sparc64/current.h
deleted file mode 100644
index a7904a7f53a8..000000000000
--- a/include/asm-sparc64/current.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/current.h>
diff --git a/include/asm-sparc64/dcr.h b/include/asm-sparc64/dcr.h
deleted file mode 100644
index d67613b1f5fe..000000000000
--- a/include/asm-sparc64/dcr.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/dcr.h>
diff --git a/include/asm-sparc64/dcu.h b/include/asm-sparc64/dcu.h
deleted file mode 100644
index 28853f4968d1..000000000000
--- a/include/asm-sparc64/dcu.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/dcu.h>
diff --git a/include/asm-sparc64/delay.h b/include/asm-sparc64/delay.h
deleted file mode 100644
index 33dc5589d841..000000000000
--- a/include/asm-sparc64/delay.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/delay.h>
diff --git a/include/asm-sparc64/device.h b/include/asm-sparc64/device.h
deleted file mode 100644
index 4145c47097e2..000000000000
--- a/include/asm-sparc64/device.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/device.h>
diff --git a/include/asm-sparc64/display7seg.h b/include/asm-sparc64/display7seg.h
deleted file mode 100644
index e74f046b41de..000000000000
--- a/include/asm-sparc64/display7seg.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/display7seg.h>
diff --git a/include/asm-sparc64/div64.h b/include/asm-sparc64/div64.h
deleted file mode 100644
index 928c94f99ecf..000000000000
--- a/include/asm-sparc64/div64.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/div64.h>
diff --git a/include/asm-sparc64/dma-mapping.h b/include/asm-sparc64/dma-mapping.h
deleted file mode 100644
index 380b7b63147f..000000000000
--- a/include/asm-sparc64/dma-mapping.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/dma-mapping.h>
diff --git a/include/asm-sparc64/dma.h b/include/asm-sparc64/dma.h
deleted file mode 100644
index 2e36248e6b59..000000000000
--- a/include/asm-sparc64/dma.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/dma.h>
diff --git a/include/asm-sparc64/ebus.h b/include/asm-sparc64/ebus.h
deleted file mode 100644
index d7d476158bd5..000000000000
--- a/include/asm-sparc64/ebus.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/ebus.h>
diff --git a/include/asm-sparc64/elf.h b/include/asm-sparc64/elf.h
deleted file mode 100644
index f256d9472c82..000000000000
--- a/include/asm-sparc64/elf.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/elf.h>
diff --git a/include/asm-sparc64/emergency-restart.h b/include/asm-sparc64/emergency-restart.h
deleted file mode 100644
index 2cac7b644da8..000000000000
--- a/include/asm-sparc64/emergency-restart.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/emergency-restart.h>
diff --git a/include/asm-sparc64/envctrl.h b/include/asm-sparc64/envctrl.h
deleted file mode 100644
index a2cc0ca334ba..000000000000
--- a/include/asm-sparc64/envctrl.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/envctrl.h>
diff --git a/include/asm-sparc64/errno.h b/include/asm-sparc64/errno.h
deleted file mode 100644
index 9701fe01cc53..000000000000
--- a/include/asm-sparc64/errno.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/errno.h>
diff --git a/include/asm-sparc64/estate.h b/include/asm-sparc64/estate.h
deleted file mode 100644
index bedd0ef5f19c..000000000000
--- a/include/asm-sparc64/estate.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/estate.h>
diff --git a/include/asm-sparc64/fb.h b/include/asm-sparc64/fb.h
deleted file mode 100644
index 1c2ac5832f39..000000000000
--- a/include/asm-sparc64/fb.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/fb.h>
diff --git a/include/asm-sparc64/fbio.h b/include/asm-sparc64/fbio.h
deleted file mode 100644
index c17edf8c7bc4..000000000000
--- a/include/asm-sparc64/fbio.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/fbio.h>
diff --git a/include/asm-sparc64/fcntl.h b/include/asm-sparc64/fcntl.h
deleted file mode 100644
index 8b1beae48cd1..000000000000
--- a/include/asm-sparc64/fcntl.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/fcntl.h>
diff --git a/include/asm-sparc64/fhc.h b/include/asm-sparc64/fhc.h
deleted file mode 100644
index 73eb04c19c47..000000000000
--- a/include/asm-sparc64/fhc.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/fhc.h>
diff --git a/include/asm-sparc64/floppy.h b/include/asm-sparc64/floppy.h
deleted file mode 100644
index 214878114436..000000000000
--- a/include/asm-sparc64/floppy.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/floppy.h>
diff --git a/include/asm-sparc64/fpumacro.h b/include/asm-sparc64/fpumacro.h
deleted file mode 100644
index 30d6d0f68bc3..000000000000
--- a/include/asm-sparc64/fpumacro.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/fpumacro.h>
diff --git a/include/asm-sparc64/futex.h b/include/asm-sparc64/futex.h
deleted file mode 100644
index 1ceb0bb2fe53..000000000000
--- a/include/asm-sparc64/futex.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/futex.h>
diff --git a/include/asm-sparc64/hardirq.h b/include/asm-sparc64/hardirq.h
deleted file mode 100644
index 63dca3db11f3..000000000000
--- a/include/asm-sparc64/hardirq.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/hardirq.h>
diff --git a/include/asm-sparc64/head.h b/include/asm-sparc64/head.h
deleted file mode 100644
index 2254c09e53f9..000000000000
--- a/include/asm-sparc64/head.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/head.h>
diff --git a/include/asm-sparc64/hugetlb.h b/include/asm-sparc64/hugetlb.h
deleted file mode 100644
index 21d8f0a9c243..000000000000
--- a/include/asm-sparc64/hugetlb.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/hugetlb.h>
diff --git a/include/asm-sparc64/hvtramp.h b/include/asm-sparc64/hvtramp.h
deleted file mode 100644
index fb46bfe934a7..000000000000
--- a/include/asm-sparc64/hvtramp.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/hvtramp.h>
diff --git a/include/asm-sparc64/hw_irq.h b/include/asm-sparc64/hw_irq.h
deleted file mode 100644
index 16920a291f51..000000000000
--- a/include/asm-sparc64/hw_irq.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/hw_irq.h>
diff --git a/include/asm-sparc64/hypervisor.h b/include/asm-sparc64/hypervisor.h
deleted file mode 100644
index fe7e51a9e429..000000000000
--- a/include/asm-sparc64/hypervisor.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/hypervisor.h>
diff --git a/include/asm-sparc64/ide.h b/include/asm-sparc64/ide.h
deleted file mode 100644
index 7125317a428d..000000000000
--- a/include/asm-sparc64/ide.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/ide.h>
diff --git a/include/asm-sparc64/idprom.h b/include/asm-sparc64/idprom.h
deleted file mode 100644
index c22f9c30bc78..000000000000
--- a/include/asm-sparc64/idprom.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/idprom.h>
diff --git a/include/asm-sparc64/intr_queue.h b/include/asm-sparc64/intr_queue.h
deleted file mode 100644
index f7225015b3db..000000000000
--- a/include/asm-sparc64/intr_queue.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/intr_queue.h>
diff --git a/include/asm-sparc64/io.h b/include/asm-sparc64/io.h
deleted file mode 100644
index 25ff258dfd33..000000000000
--- a/include/asm-sparc64/io.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/io.h>
diff --git a/include/asm-sparc64/ioctl.h b/include/asm-sparc64/ioctl.h
deleted file mode 100644
index 18fc5623ff51..000000000000
--- a/include/asm-sparc64/ioctl.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/ioctl.h>
diff --git a/include/asm-sparc64/ioctls.h b/include/asm-sparc64/ioctls.h
deleted file mode 100644
index dcd5540ec103..000000000000
--- a/include/asm-sparc64/ioctls.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/ioctls.h>
diff --git a/include/asm-sparc64/iommu.h b/include/asm-sparc64/iommu.h
deleted file mode 100644
index 76252bb85e97..000000000000
--- a/include/asm-sparc64/iommu.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/iommu.h>
diff --git a/include/asm-sparc64/ipcbuf.h b/include/asm-sparc64/ipcbuf.h
deleted file mode 100644
index 41dfaf1149b5..000000000000
--- a/include/asm-sparc64/ipcbuf.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/ipcbuf.h>
diff --git a/include/asm-sparc64/irq.h b/include/asm-sparc64/irq.h
deleted file mode 100644
index b2102e65947c..000000000000
--- a/include/asm-sparc64/irq.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/irq.h>
diff --git a/include/asm-sparc64/irq_regs.h b/include/asm-sparc64/irq_regs.h
deleted file mode 100644
index 1e2b8a1e745a..000000000000
--- a/include/asm-sparc64/irq_regs.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/irq_regs.h>
diff --git a/include/asm-sparc64/irqflags.h b/include/asm-sparc64/irqflags.h
deleted file mode 100644
index 27b091fc3fa0..000000000000
--- a/include/asm-sparc64/irqflags.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/irqflags.h>
diff --git a/include/asm-sparc64/kdebug.h b/include/asm-sparc64/kdebug.h
deleted file mode 100644
index 78cfd5d2749b..000000000000
--- a/include/asm-sparc64/kdebug.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/kdebug.h>
diff --git a/include/asm-sparc64/kgdb.h b/include/asm-sparc64/kgdb.h
deleted file mode 100644
index aa6532fd3a13..000000000000
--- a/include/asm-sparc64/kgdb.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/kgdb.h>
diff --git a/include/asm-sparc64/kmap_types.h b/include/asm-sparc64/kmap_types.h
deleted file mode 100644
index 276530cf5395..000000000000
--- a/include/asm-sparc64/kmap_types.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/kmap_types.h>
diff --git a/include/asm-sparc64/kprobes.h b/include/asm-sparc64/kprobes.h
deleted file mode 100644
index c55e43e4d2a4..000000000000
--- a/include/asm-sparc64/kprobes.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/kprobes.h>
diff --git a/include/asm-sparc64/ldc.h b/include/asm-sparc64/ldc.h
deleted file mode 100644
index 40f3f231c457..000000000000
--- a/include/asm-sparc64/ldc.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/ldc.h>
diff --git a/include/asm-sparc64/linkage.h b/include/asm-sparc64/linkage.h
deleted file mode 100644
index 3ea4fd13f193..000000000000
--- a/include/asm-sparc64/linkage.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/linkage.h>
diff --git a/include/asm-sparc64/lmb.h b/include/asm-sparc64/lmb.h
deleted file mode 100644
index 3d04981701e2..000000000000
--- a/include/asm-sparc64/lmb.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/lmb.h>
diff --git a/include/asm-sparc64/local.h b/include/asm-sparc64/local.h
deleted file mode 100644
index c11c530f74d0..000000000000
--- a/include/asm-sparc64/local.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/local.h>
diff --git a/include/asm-sparc64/lsu.h b/include/asm-sparc64/lsu.h
deleted file mode 100644
index 4e3d8b128a58..000000000000
--- a/include/asm-sparc64/lsu.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/lsu.h>
diff --git a/include/asm-sparc64/mc146818rtc.h b/include/asm-sparc64/mc146818rtc.h
deleted file mode 100644
index 97842e6ed1c2..000000000000
--- a/include/asm-sparc64/mc146818rtc.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/mc146818rtc.h>
diff --git a/include/asm-sparc64/mdesc.h b/include/asm-sparc64/mdesc.h
deleted file mode 100644
index 165a19347286..000000000000
--- a/include/asm-sparc64/mdesc.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/mdesc.h>
diff --git a/include/asm-sparc64/mman.h b/include/asm-sparc64/mman.h
deleted file mode 100644
index 17ddb1724f51..000000000000
--- a/include/asm-sparc64/mman.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/mman.h>
diff --git a/include/asm-sparc64/mmu.h b/include/asm-sparc64/mmu.h
deleted file mode 100644
index e677a64d8db1..000000000000
--- a/include/asm-sparc64/mmu.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/mmu.h>
diff --git a/include/asm-sparc64/mmu_context.h b/include/asm-sparc64/mmu_context.h
deleted file mode 100644
index 877fee94bd4e..000000000000
--- a/include/asm-sparc64/mmu_context.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/mmu_context.h>
diff --git a/include/asm-sparc64/mmzone.h b/include/asm-sparc64/mmzone.h
deleted file mode 100644
index 43a710f7892a..000000000000
--- a/include/asm-sparc64/mmzone.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/mmzone.h>
diff --git a/include/asm-sparc64/module.h b/include/asm-sparc64/module.h
deleted file mode 100644
index a9606db55e4a..000000000000
--- a/include/asm-sparc64/module.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/module.h>
diff --git a/include/asm-sparc64/mostek.h b/include/asm-sparc64/mostek.h
deleted file mode 100644
index 95a752f7e875..000000000000
--- a/include/asm-sparc64/mostek.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/mostek.h>
diff --git a/include/asm-sparc64/msgbuf.h b/include/asm-sparc64/msgbuf.h
deleted file mode 100644
index 5b33cc9d9bfb..000000000000
--- a/include/asm-sparc64/msgbuf.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/msgbuf.h>
diff --git a/include/asm-sparc64/mutex.h b/include/asm-sparc64/mutex.h
deleted file mode 100644
index c0c0f8f260d6..000000000000
--- a/include/asm-sparc64/mutex.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/mutex.h>
diff --git a/include/asm-sparc64/ns87303.h b/include/asm-sparc64/ns87303.h
deleted file mode 100644
index 5f369d4df3db..000000000000
--- a/include/asm-sparc64/ns87303.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/ns87303.h>
diff --git a/include/asm-sparc64/of_device.h b/include/asm-sparc64/of_device.h
deleted file mode 100644
index a769fdbe164a..000000000000
--- a/include/asm-sparc64/of_device.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/of_device.h>
diff --git a/include/asm-sparc64/of_platform.h b/include/asm-sparc64/of_platform.h
deleted file mode 100644
index f7c427b8bc61..000000000000
--- a/include/asm-sparc64/of_platform.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/of_platform.h>
diff --git a/include/asm-sparc64/openprom.h b/include/asm-sparc64/openprom.h
deleted file mode 100644
index acf4b234fae3..000000000000
--- a/include/asm-sparc64/openprom.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/openprom.h>
diff --git a/include/asm-sparc64/openpromio.h b/include/asm-sparc64/openpromio.h
deleted file mode 100644
index 122fabda21f1..000000000000
--- a/include/asm-sparc64/openpromio.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/openpromio.h>
diff --git a/include/asm-sparc64/oplib.h b/include/asm-sparc64/oplib.h
deleted file mode 100644
index d93e44e63510..000000000000
--- a/include/asm-sparc64/oplib.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/oplib.h>
diff --git a/include/asm-sparc64/page.h b/include/asm-sparc64/page.h
deleted file mode 100644
index f46c1fb53028..000000000000
--- a/include/asm-sparc64/page.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/page.h>
diff --git a/include/asm-sparc64/param.h b/include/asm-sparc64/param.h
deleted file mode 100644
index 40c6dc110822..000000000000
--- a/include/asm-sparc64/param.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/param.h>
diff --git a/include/asm-sparc64/parport.h b/include/asm-sparc64/parport.h
deleted file mode 100644
index b4e4ca812eb6..000000000000
--- a/include/asm-sparc64/parport.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/parport.h>
diff --git a/include/asm-sparc64/pci.h b/include/asm-sparc64/pci.h
deleted file mode 100644
index da54c4d1f39c..000000000000
--- a/include/asm-sparc64/pci.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/pci.h>
diff --git a/include/asm-sparc64/percpu.h b/include/asm-sparc64/percpu.h
deleted file mode 100644
index 292729bb350f..000000000000
--- a/include/asm-sparc64/percpu.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/percpu.h>
diff --git a/include/asm-sparc64/perfctr.h b/include/asm-sparc64/perfctr.h
deleted file mode 100644
index 52073a9f8e30..000000000000
--- a/include/asm-sparc64/perfctr.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/perfctr.h>
diff --git a/include/asm-sparc64/pgalloc.h b/include/asm-sparc64/pgalloc.h
deleted file mode 100644
index bec31641011c..000000000000
--- a/include/asm-sparc64/pgalloc.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/pgalloc.h>
diff --git a/include/asm-sparc64/pgtable.h b/include/asm-sparc64/pgtable.h
deleted file mode 100644
index 9decbd99aeff..000000000000
--- a/include/asm-sparc64/pgtable.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/pgtable.h>
diff --git a/include/asm-sparc64/pil.h b/include/asm-sparc64/pil.h
deleted file mode 100644
index d805f33f1e0f..000000000000
--- a/include/asm-sparc64/pil.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/pil.h>
diff --git a/include/asm-sparc64/poll.h b/include/asm-sparc64/poll.h
deleted file mode 100644
index 8e2f31b4641a..000000000000
--- a/include/asm-sparc64/poll.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/poll.h>
diff --git a/include/asm-sparc64/posix_types.h b/include/asm-sparc64/posix_types.h
deleted file mode 100644
index 8cee99200232..000000000000
--- a/include/asm-sparc64/posix_types.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/posix_types.h>
diff --git a/include/asm-sparc64/processor.h b/include/asm-sparc64/processor.h
deleted file mode 100644
index 21de6cc182eb..000000000000
--- a/include/asm-sparc64/processor.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/processor.h>
diff --git a/include/asm-sparc64/prom.h b/include/asm-sparc64/prom.h
deleted file mode 100644
index 5fa166ee3ffa..000000000000
--- a/include/asm-sparc64/prom.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/prom.h>
diff --git a/include/asm-sparc64/psrcompat.h b/include/asm-sparc64/psrcompat.h
deleted file mode 100644
index 587846f48358..000000000000
--- a/include/asm-sparc64/psrcompat.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/psrcompat.h>
diff --git a/include/asm-sparc64/pstate.h b/include/asm-sparc64/pstate.h
deleted file mode 100644
index 3ccf0be25360..000000000000
--- a/include/asm-sparc64/pstate.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/pstate.h>
diff --git a/include/asm-sparc64/ptrace.h b/include/asm-sparc64/ptrace.h
deleted file mode 100644
index 1a55b9fb3b0c..000000000000
--- a/include/asm-sparc64/ptrace.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/ptrace.h>
diff --git a/include/asm-sparc64/reboot.h b/include/asm-sparc64/reboot.h
deleted file mode 100644
index 0d72eb811cc8..000000000000
--- a/include/asm-sparc64/reboot.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/reboot.h>
diff --git a/include/asm-sparc64/reg.h b/include/asm-sparc64/reg.h
deleted file mode 100644
index 495bab27da07..000000000000
--- a/include/asm-sparc64/reg.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/reg.h>
diff --git a/include/asm-sparc64/resource.h b/include/asm-sparc64/resource.h
deleted file mode 100644
index 46e3bc0de476..000000000000
--- a/include/asm-sparc64/resource.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/resource.h>
diff --git a/include/asm-sparc64/rtc.h b/include/asm-sparc64/rtc.h
deleted file mode 100644
index e49a9685aead..000000000000
--- a/include/asm-sparc64/rtc.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/rtc.h>
diff --git a/include/asm-sparc64/rwsem-const.h b/include/asm-sparc64/rwsem-const.h
deleted file mode 100644
index 2a1de315c86a..000000000000
--- a/include/asm-sparc64/rwsem-const.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/rwsem-const.h>
diff --git a/include/asm-sparc64/rwsem.h b/include/asm-sparc64/rwsem.h
deleted file mode 100644
index 6943c56ed087..000000000000
--- a/include/asm-sparc64/rwsem.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/rwsem.h>
diff --git a/include/asm-sparc64/sbus.h b/include/asm-sparc64/sbus.h
deleted file mode 100644
index 0cab0e89b874..000000000000
--- a/include/asm-sparc64/sbus.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/sbus.h>
diff --git a/include/asm-sparc64/scatterlist.h b/include/asm-sparc64/scatterlist.h
deleted file mode 100644
index b7fef95953ca..000000000000
--- a/include/asm-sparc64/scatterlist.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/scatterlist.h>
diff --git a/include/asm-sparc64/scratchpad.h b/include/asm-sparc64/scratchpad.h
deleted file mode 100644
index 23675f6a915a..000000000000
--- a/include/asm-sparc64/scratchpad.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/scratchpad.h>
diff --git a/include/asm-sparc64/seccomp.h b/include/asm-sparc64/seccomp.h
deleted file mode 100644
index f22f02a08a61..000000000000
--- a/include/asm-sparc64/seccomp.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/seccomp.h>
diff --git a/include/asm-sparc64/sections.h b/include/asm-sparc64/sections.h
deleted file mode 100644
index 721496f8b2be..000000000000
--- a/include/asm-sparc64/sections.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/sections.h>
diff --git a/include/asm-sparc64/sembuf.h b/include/asm-sparc64/sembuf.h
deleted file mode 100644
index c55b95214136..000000000000
--- a/include/asm-sparc64/sembuf.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/sembuf.h>
diff --git a/include/asm-sparc64/setup.h b/include/asm-sparc64/setup.h
deleted file mode 100644
index 7143d06b2c55..000000000000
--- a/include/asm-sparc64/setup.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/setup.h>
diff --git a/include/asm-sparc64/sfafsr.h b/include/asm-sparc64/sfafsr.h
deleted file mode 100644
index 8036fc377a4d..000000000000
--- a/include/asm-sparc64/sfafsr.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/sfafsr.h>
diff --git a/include/asm-sparc64/sfp-machine.h b/include/asm-sparc64/sfp-machine.h
deleted file mode 100644
index 7bbc4fecdc7d..000000000000
--- a/include/asm-sparc64/sfp-machine.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/sfp-machine.h>
diff --git a/include/asm-sparc64/shmbuf.h b/include/asm-sparc64/shmbuf.h
deleted file mode 100644
index 0c54a2d68681..000000000000
--- a/include/asm-sparc64/shmbuf.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/shmbuf.h>
diff --git a/include/asm-sparc64/shmparam.h b/include/asm-sparc64/shmparam.h
deleted file mode 100644
index 5fa3a9b05e7f..000000000000
--- a/include/asm-sparc64/shmparam.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/shmparam.h>
diff --git a/include/asm-sparc64/sigcontext.h b/include/asm-sparc64/sigcontext.h
deleted file mode 100644
index 5b16dcce44f2..000000000000
--- a/include/asm-sparc64/sigcontext.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/sigcontext.h>
diff --git a/include/asm-sparc64/siginfo.h b/include/asm-sparc64/siginfo.h
deleted file mode 100644
index 8ffd6ebabc7a..000000000000
--- a/include/asm-sparc64/siginfo.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/siginfo.h>
diff --git a/include/asm-sparc64/signal.h b/include/asm-sparc64/signal.h
deleted file mode 100644
index 79705e5d49c3..000000000000
--- a/include/asm-sparc64/signal.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/signal.h>
diff --git a/include/asm-sparc64/smp.h b/include/asm-sparc64/smp.h
deleted file mode 100644
index 5095a2cbea52..000000000000
--- a/include/asm-sparc64/smp.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/smp.h>
diff --git a/include/asm-sparc64/socket.h b/include/asm-sparc64/socket.h
deleted file mode 100644
index 13e0d5d94bb3..000000000000
--- a/include/asm-sparc64/socket.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/socket.h>
diff --git a/include/asm-sparc64/sockios.h b/include/asm-sparc64/sockios.h
deleted file mode 100644
index 2cb4b641482c..000000000000
--- a/include/asm-sparc64/sockios.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/sockios.h>
diff --git a/include/asm-sparc64/sparsemem.h b/include/asm-sparc64/sparsemem.h
deleted file mode 100644
index e681f22a97ae..000000000000
--- a/include/asm-sparc64/sparsemem.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/sparsemem.h>
diff --git a/include/asm-sparc64/spinlock.h b/include/asm-sparc64/spinlock.h
deleted file mode 100644
index 0115b8156eb8..000000000000
--- a/include/asm-sparc64/spinlock.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/spinlock.h>
diff --git a/include/asm-sparc64/spinlock_types.h b/include/asm-sparc64/spinlock_types.h
deleted file mode 100644
index 48d81c8734b5..000000000000
--- a/include/asm-sparc64/spinlock_types.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/spinlock_types.h>
diff --git a/include/asm-sparc64/spitfire.h b/include/asm-sparc64/spitfire.h
deleted file mode 100644
index 4430d2fbb0dc..000000000000
--- a/include/asm-sparc64/spitfire.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/spitfire.h>
diff --git a/include/asm-sparc64/sstate.h b/include/asm-sparc64/sstate.h
deleted file mode 100644
index 97720ce2fd43..000000000000
--- a/include/asm-sparc64/sstate.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/sstate.h>
diff --git a/include/asm-sparc64/stacktrace.h b/include/asm-sparc64/stacktrace.h
deleted file mode 100644
index adc9b92c0ef1..000000000000
--- a/include/asm-sparc64/stacktrace.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/stacktrace.h>
diff --git a/include/asm-sparc64/starfire.h b/include/asm-sparc64/starfire.h
deleted file mode 100644
index db97daa3bed4..000000000000
--- a/include/asm-sparc64/starfire.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/starfire.h>
diff --git a/include/asm-sparc64/stat.h b/include/asm-sparc64/stat.h
deleted file mode 100644
index b108a866256b..000000000000
--- a/include/asm-sparc64/stat.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/stat.h>
diff --git a/include/asm-sparc64/statfs.h b/include/asm-sparc64/statfs.h
deleted file mode 100644
index 5503d6a4c67e..000000000000
--- a/include/asm-sparc64/statfs.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/statfs.h>
diff --git a/include/asm-sparc64/string.h b/include/asm-sparc64/string.h
deleted file mode 100644
index 5018cd8b6ad0..000000000000
--- a/include/asm-sparc64/string.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/string.h>
diff --git a/include/asm-sparc64/sunbpp.h b/include/asm-sparc64/sunbpp.h
deleted file mode 100644
index 9632be290eb5..000000000000
--- a/include/asm-sparc64/sunbpp.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/sunbpp.h>
diff --git a/include/asm-sparc64/syscalls.h b/include/asm-sparc64/syscalls.h
deleted file mode 100644
index 3477b16e30ca..000000000000
--- a/include/asm-sparc64/syscalls.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/syscalls.h>
diff --git a/include/asm-sparc64/system.h b/include/asm-sparc64/system.h
deleted file mode 100644
index be2603c2e527..000000000000
--- a/include/asm-sparc64/system.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/system.h>
diff --git a/include/asm-sparc64/termbits.h b/include/asm-sparc64/termbits.h
deleted file mode 100644
index e03f97592c70..000000000000
--- a/include/asm-sparc64/termbits.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/termbits.h>
diff --git a/include/asm-sparc64/termios.h b/include/asm-sparc64/termios.h
deleted file mode 100644
index 940495eb05cc..000000000000
--- a/include/asm-sparc64/termios.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/termios.h>
diff --git a/include/asm-sparc64/thread_info.h b/include/asm-sparc64/thread_info.h
deleted file mode 100644
index 92bed7913395..000000000000
--- a/include/asm-sparc64/thread_info.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/thread_info.h>
diff --git a/include/asm-sparc64/timer.h b/include/asm-sparc64/timer.h
deleted file mode 100644
index 88026d83cc93..000000000000
--- a/include/asm-sparc64/timer.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/timer.h>
diff --git a/include/asm-sparc64/timex.h b/include/asm-sparc64/timex.h
deleted file mode 100644
index 8dd59ee24b48..000000000000
--- a/include/asm-sparc64/timex.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/timex.h>
diff --git a/include/asm-sparc64/tlb.h b/include/asm-sparc64/tlb.h
deleted file mode 100644
index ae92fce10936..000000000000
--- a/include/asm-sparc64/tlb.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/tlb.h>
diff --git a/include/asm-sparc64/tlbflush.h b/include/asm-sparc64/tlbflush.h
deleted file mode 100644
index a43979a06cd9..000000000000
--- a/include/asm-sparc64/tlbflush.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/tlbflush.h>
diff --git a/include/asm-sparc64/topology.h b/include/asm-sparc64/topology.h
deleted file mode 100644
index 46999b60fbba..000000000000
--- a/include/asm-sparc64/topology.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/topology.h>
diff --git a/include/asm-sparc64/tsb.h b/include/asm-sparc64/tsb.h
deleted file mode 100644
index 3677a302ea3e..000000000000
--- a/include/asm-sparc64/tsb.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/tsb.h>
diff --git a/include/asm-sparc64/ttable.h b/include/asm-sparc64/ttable.h
deleted file mode 100644
index a550f1bf6f9b..000000000000
--- a/include/asm-sparc64/ttable.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/ttable.h>
diff --git a/include/asm-sparc64/types.h b/include/asm-sparc64/types.h
deleted file mode 100644
index cfbfad5043eb..000000000000
--- a/include/asm-sparc64/types.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/types.h>
diff --git a/include/asm-sparc64/uaccess.h b/include/asm-sparc64/uaccess.h
deleted file mode 100644
index 2872d22844f3..000000000000
--- a/include/asm-sparc64/uaccess.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/uaccess.h>
diff --git a/include/asm-sparc64/uctx.h b/include/asm-sparc64/uctx.h
deleted file mode 100644
index 9e1b5794b07f..000000000000
--- a/include/asm-sparc64/uctx.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/uctx.h>
diff --git a/include/asm-sparc64/unaligned.h b/include/asm-sparc64/unaligned.h
deleted file mode 100644
index 19fbf9508acf..000000000000
--- a/include/asm-sparc64/unaligned.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/unaligned.h>
diff --git a/include/asm-sparc64/unistd.h b/include/asm-sparc64/unistd.h
deleted file mode 100644
index ad86e0b7a455..000000000000
--- a/include/asm-sparc64/unistd.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/unistd.h>
diff --git a/include/asm-sparc64/upa.h b/include/asm-sparc64/upa.h
deleted file mode 100644
index aab72930815a..000000000000
--- a/include/asm-sparc64/upa.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/upa.h>
diff --git a/include/asm-sparc64/user.h b/include/asm-sparc64/user.h
deleted file mode 100644
index 29fc6e906c29..000000000000
--- a/include/asm-sparc64/user.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/user.h>
diff --git a/include/asm-sparc64/utrap.h b/include/asm-sparc64/utrap.h
deleted file mode 100644
index b030a41f1895..000000000000
--- a/include/asm-sparc64/utrap.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/utrap.h>
diff --git a/include/asm-sparc64/vga.h b/include/asm-sparc64/vga.h
deleted file mode 100644
index fbf4d58a56f0..000000000000
--- a/include/asm-sparc64/vga.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/vga.h>
diff --git a/include/asm-sparc64/vio.h b/include/asm-sparc64/vio.h
deleted file mode 100644
index 299b26ab81a7..000000000000
--- a/include/asm-sparc64/vio.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/vio.h>
diff --git a/include/asm-sparc64/visasm.h b/include/asm-sparc64/visasm.h
deleted file mode 100644
index 837a12278f4a..000000000000
--- a/include/asm-sparc64/visasm.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/visasm.h>
diff --git a/include/asm-sparc64/watchdog.h b/include/asm-sparc64/watchdog.h
deleted file mode 100644
index b0f2857145f7..000000000000
--- a/include/asm-sparc64/watchdog.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/watchdog.h>
diff --git a/include/asm-sparc64/xor.h b/include/asm-sparc64/xor.h
deleted file mode 100644
index ef187cc07ed5..000000000000
--- a/include/asm-sparc64/xor.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/xor.h>
diff --git a/include/asm-x86/dma-mapping.h b/include/asm-x86/dma-mapping.h
index 0eaa9bf6011f..ad9cd6d49bfc 100644
--- a/include/asm-x86/dma-mapping.h
+++ b/include/asm-x86/dma-mapping.h
@@ -249,25 +249,5 @@ static inline int dma_get_cache_alignment(void)
 
 #define dma_is_consistent(d, h) (1)
 
-#ifdef CONFIG_X86_32
-#  define ARCH_HAS_DMA_DECLARE_COHERENT_MEMORY
-struct dma_coherent_mem {
-        void            *virt_base;
-        u32             device_base;
-        int             size;
-        int             flags;
-        unsigned long   *bitmap;
-};
-
-extern int
-dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr,
-                            dma_addr_t device_addr, size_t size, int flags);
-
-extern void
-dma_release_declared_memory(struct device *dev);
-
-extern void *
-dma_mark_declared_memory_occupied(struct device *dev,
-                                  dma_addr_t device_addr, size_t size);
-#endif /* CONFIG_X86_32 */
+#include <asm-generic/dma-coherent.h>
 #endif
diff --git a/include/asm-x86/iommu.h b/include/asm-x86/iommu.h
index ecc8061904a9..5f888cc5be49 100644
--- a/include/asm-x86/iommu.h
+++ b/include/asm-x86/iommu.h
@@ -7,6 +7,8 @@ extern struct dma_mapping_ops nommu_dma_ops;
 extern int force_iommu, no_iommu;
 extern int iommu_detected;
 
+extern unsigned long iommu_num_pages(unsigned long addr, unsigned long len);
+
 #ifdef CONFIG_GART_IOMMU
 extern int gart_iommu_aperture;
 extern int gart_iommu_aperture_allowed;
diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index 4c4142c5aa6e..a26f565e8189 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -97,6 +97,7 @@ header-y += ioctl.h
 header-y += ip6_tunnel.h
 header-y += ipmi_msgdefs.h
 header-y += ipsec.h
+header-y += ip_vs.h
 header-y += ipx.h
 header-y += irda.h
 header-y += iso_fs.h
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 88d68081a0f1..e61f22be4d0e 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -655,6 +655,7 @@ extern struct request *blk_get_request(struct request_queue *, int, gfp_t);
 extern void blk_insert_request(struct request_queue *, struct request *, int, void *);
 extern void blk_requeue_request(struct request_queue *, struct request *);
 extern void blk_plug_device(struct request_queue *);
+extern void blk_plug_device_unlocked(struct request_queue *);
 extern int blk_remove_plug(struct request_queue *);
 extern void blk_recount_segments(struct request_queue *, struct bio *);
 extern int scsi_cmd_ioctl(struct file *, struct request_queue *,
diff --git a/include/linux/buffer_head.h b/include/linux/buffer_head.h
index 82aa36c53ea7..50cfe8ceb478 100644
--- a/include/linux/buffer_head.h
+++ b/include/linux/buffer_head.h
@@ -205,6 +205,8 @@ void block_invalidatepage(struct page *page, unsigned long offset);
 int block_write_full_page(struct page *page, get_block_t *get_block,
                                 struct writeback_control *wbc);
 int block_read_full_page(struct page*, get_block_t*);
+int block_is_partially_uptodate(struct page *page, read_descriptor_t *desc,
+                                unsigned long from);
 int block_write_begin(struct file *, struct address_space *,
                                 loff_t, unsigned, unsigned,
                                 struct page **, void **, get_block_t*);
diff --git a/include/linux/connector.h b/include/linux/connector.h
index 96a89d3d6727..5c7f9468f753 100644
--- a/include/linux/connector.h
+++ b/include/linux/connector.h
@@ -38,8 +38,9 @@
 #define CN_W1_VAL                       0x1
 #define CN_IDX_V86D                     0x4
 #define CN_VAL_V86D_UVESAFB             0x1
+#define CN_IDX_BB                       0x5     /* BlackBoard, from the TSP GPL sampling framework */
 
-#define CN_NETLINK_USERS                5
+#define CN_NETLINK_USERS                6
 
 /*
  * Maximum connector's message size.
diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h
index 2270ca5ec631..6fd5668aa572 100644
--- a/include/linux/cpufreq.h
+++ b/include/linux/cpufreq.h
@@ -106,6 +106,7 @@ struct cpufreq_policy {
 #define CPUFREQ_ADJUST          (0)
 #define CPUFREQ_INCOMPATIBLE    (1)
 #define CPUFREQ_NOTIFY          (2)
+#define CPUFREQ_START           (3)
 
 #define CPUFREQ_SHARED_TYPE_NONE (0) /* None */
 #define CPUFREQ_SHARED_TYPE_HW   (1) /* HW does needed coordination */
diff --git a/include/linux/cpumask.h b/include/linux/cpumask.h
index 1b5c98e7fef7..d3219d73f8e6 100644
--- a/include/linux/cpumask.h
+++ b/include/linux/cpumask.h
@@ -62,15 +62,7 @@
  * int next_cpu_nr(cpu, mask)           Next cpu past 'cpu', or nr_cpu_ids
  *
  * cpumask_t cpumask_of_cpu(cpu)        Return cpumask with bit 'cpu' set
- *ifdef CONFIG_HAS_CPUMASK_OF_CPU
- * cpumask_of_cpu_ptr_declare(v)        Declares cpumask_t *v
- * cpumask_of_cpu_ptr_next(v, cpu)      Sets v = &cpumask_of_cpu_map[cpu]
- * cpumask_of_cpu_ptr(v, cpu)           Combines above two operations
- *else
- * cpumask_of_cpu_ptr_declare(v)        Declares cpumask_t _v and *v = &_v
- * cpumask_of_cpu_ptr_next(v, cpu)      Sets _v = cpumask_of_cpu(cpu)
- * cpumask_of_cpu_ptr(v, cpu)           Combines above two operations
- *endif
+ *                                      (can be used as an lvalue)
  * CPU_MASK_ALL                         Initializer - all bits set
  * CPU_MASK_NONE                        Initializer - no bits set
  * unsigned long *cpus_addr(mask)       Array of unsigned long's in mask
@@ -273,37 +265,30 @@ static inline void __cpus_shift_left(cpumask_t *dstp,
         bitmap_shift_left(dstp->bits, srcp->bits, n, nbits);
 }
 
+/*
+ * Special-case data structure for "single bit set only" constant CPU masks.
+ *
+ * We pre-generate all the 64 (or 32) possible bit positions, with enough
+ * padding to the left and the right, and return the constant pointer
+ * appropriately offset.
+ */
+extern const unsigned long
+        cpu_bit_bitmap[BITS_PER_LONG+1][BITS_TO_LONGS(NR_CPUS)];
+
+static inline const cpumask_t *get_cpu_mask(unsigned int cpu)
+{
+        const unsigned long *p = cpu_bit_bitmap[1 + cpu % BITS_PER_LONG];
+        p -= cpu / BITS_PER_LONG;
+        return (const cpumask_t *)p;
+}
+
+/*
+ * In cases where we take the address of the cpumask immediately,
+ * gcc optimizes it out (it's a constant) and there's no huge stack
+ * variable created:
+ */
+#define cpumask_of_cpu(cpu) (*get_cpu_mask(cpu))
 
-#ifdef CONFIG_HAVE_CPUMASK_OF_CPU_MAP
-extern cpumask_t *cpumask_of_cpu_map;
-#define cpumask_of_cpu(cpu)     (cpumask_of_cpu_map[cpu])
-#define cpumask_of_cpu_ptr(v, cpu)                                      \
-                const cpumask_t *v = &cpumask_of_cpu(cpu)
-#define cpumask_of_cpu_ptr_declare(v)                                   \
-                const cpumask_t *v
-#define cpumask_of_cpu_ptr_next(v, cpu)                                 \
-                                        v = &cpumask_of_cpu(cpu)
-#else
-#define cpumask_of_cpu(cpu)                                             \
-({                                                                      \
-        typeof(_unused_cpumask_arg_) m;                                 \
-        if (sizeof(m) == sizeof(unsigned long)) {                       \
-                m.bits[0] = 1UL<<(cpu);                                 \
-        } else {                                                        \
-                cpus_clear(m);                                          \
-                cpu_set((cpu), m);                                      \
-        }                                                               \
-        m;                                                              \
-})
-#define cpumask_of_cpu_ptr(v, cpu)                                      \
-                cpumask_t _##v = cpumask_of_cpu(cpu);                   \
-                const cpumask_t *v = &_##v
-#define cpumask_of_cpu_ptr_declare(v)                                   \
-                cpumask_t _##v;                                         \
-                const cpumask_t *v = &_##v
-#define cpumask_of_cpu_ptr_next(v, cpu)                                 \
-                                        _##v = cpumask_of_cpu(cpu)
-#endif
 
 #define CPU_MASK_LAST_WORD BITMAP_LAST_WORD_MASK(NR_CPUS)
 
diff --git a/include/linux/file.h b/include/linux/file.h
index 27c64bdc68c9..a20259e248a5 100644
--- a/include/linux/file.h
+++ b/include/linux/file.h
@@ -34,8 +34,9 @@ extern struct file *fget(unsigned int fd);
 extern struct file *fget_light(unsigned int fd, int *fput_needed);
 extern void set_close_on_exec(unsigned int fd, int flag);
 extern void put_filp(struct file *);
+extern int alloc_fd(unsigned start, unsigned flags);
 extern int get_unused_fd(void);
-extern int get_unused_fd_flags(int flags);
+#define get_unused_fd_flags(flags) alloc_fd(0, (flags))
 extern void put_unused_fd(unsigned int fd);
 
 extern void fd_install(unsigned int fd, struct file *file);
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 8252b045e624..580b513668fe 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -443,6 +443,27 @@ static inline size_t iov_iter_count(struct iov_iter *i)
         return i->count;
 }
 
+/*
+ * "descriptor" for what we're up to with a read.
+ * This allows us to use the same read code yet
+ * have multiple different users of the data that
+ * we read from a file.
+ *
+ * The simplest case just copies the data to user
+ * mode.
+ */
+typedef struct {
+        size_t written;
+        size_t count;
+        union {
+                char __user *buf;
+                void *data;
+        } arg;
+        int error;
+} read_descriptor_t;
+
+typedef int (*read_actor_t)(read_descriptor_t *, struct page *,
+                unsigned long, unsigned long);
 
 struct address_space_operations {
         int (*writepage)(struct page *page, struct writeback_control *wbc);
@@ -484,6 +505,8 @@ struct address_space_operations {
         int (*migratepage) (struct address_space *,
                         struct page *, struct page *);
         int (*launder_page) (struct page *);
+        int (*is_partially_uptodate) (struct page *, read_descriptor_t *,
+                                        unsigned long);
 };
 
 /*
@@ -1198,27 +1221,6 @@ struct block_device_operations {
         struct module *owner;
 };
 
-/*
- * "descriptor" for what we're up to with a read.
- * This allows us to use the same read code yet
- * have multiple different users of the data that
- * we read from a file.
- *
- * The simplest case just copies the data to user
- * mode.
- */
-typedef struct {
-        size_t written;
-        size_t count;
-        union {
-                char __user * buf;
-                void *data;
-        } arg;
-        int error;
-} read_descriptor_t;
-
-typedef int (*read_actor_t)(read_descriptor_t *, struct page *, unsigned long, unsigned long);
-
 /* These macros are for out of kernel modules to test that
  * the kernel supports the unlocked_ioctl and compat_ioctl
  * fields in struct file_operations. */
diff --git a/include/linux/ioport.h b/include/linux/ioport.h
index 2cd07cc29687..22d2115458c6 100644
--- a/include/linux/ioport.h
+++ b/include/linux/ioport.h
@@ -118,6 +118,10 @@ extern int allocate_resource(struct resource *root, struct resource *new,
 int adjust_resource(struct resource *res, resource_size_t start,
                     resource_size_t size);
 resource_size_t resource_alignment(struct resource *res);
+static inline resource_size_t resource_size(struct resource *res)
+{
+        return res->end - res->start + 1;
+}
 
 /* Convenience shorthand with allocation */
 #define request_region(start,n,name)    __request_region(&ioport_resource, (start), (n), (name))
diff --git a/include/linux/ip_vs.h b/include/linux/ip_vs.h
new file mode 100644
index 000000000000..ec6eb49af2d8
--- /dev/null
+++ b/include/linux/ip_vs.h
@@ -0,0 +1,245 @@
+/*
+ *      IP Virtual Server
+ *      data structure and functionality definitions
+ */
+
+#ifndef _IP_VS_H
+#define _IP_VS_H
+
+#include <linux/types.h>        /* For __beXX types in userland */
+
+#define IP_VS_VERSION_CODE      0x010201
+#define NVERSION(version)                       \
+        (version >> 16) & 0xFF,                 \
+        (version >> 8) & 0xFF,                  \
+        version & 0xFF
+
+/*
+ *      Virtual Service Flags
+ */
+#define IP_VS_SVC_F_PERSISTENT  0x0001          /* persistent port */
+#define IP_VS_SVC_F_HASHED      0x0002          /* hashed entry */
+
+/*
+ *      Destination Server Flags
+ */
+#define IP_VS_DEST_F_AVAILABLE  0x0001          /* server is available */
+#define IP_VS_DEST_F_OVERLOAD   0x0002          /* server is overloaded */
+
+/*
+ *      IPVS sync daemon states
+ */
+#define IP_VS_STATE_NONE        0x0000          /* daemon is stopped */
+#define IP_VS_STATE_MASTER      0x0001          /* started as master */
+#define IP_VS_STATE_BACKUP      0x0002          /* started as backup */
+
+/*
+ *      IPVS socket options
+ */
+#define IP_VS_BASE_CTL          (64+1024+64)            /* base */
+
+#define IP_VS_SO_SET_NONE       IP_VS_BASE_CTL          /* just peek */
+#define IP_VS_SO_SET_INSERT     (IP_VS_BASE_CTL+1)
+#define IP_VS_SO_SET_ADD        (IP_VS_BASE_CTL+2)
+#define IP_VS_SO_SET_EDIT       (IP_VS_BASE_CTL+3)
+#define IP_VS_SO_SET_DEL        (IP_VS_BASE_CTL+4)
+#define IP_VS_SO_SET_FLUSH      (IP_VS_BASE_CTL+5)
+#define IP_VS_SO_SET_LIST       (IP_VS_BASE_CTL+6)
+#define IP_VS_SO_SET_ADDDEST    (IP_VS_BASE_CTL+7)
+#define IP_VS_SO_SET_DELDEST    (IP_VS_BASE_CTL+8)
+#define IP_VS_SO_SET_EDITDEST   (IP_VS_BASE_CTL+9)
+#define IP_VS_SO_SET_TIMEOUT    (IP_VS_BASE_CTL+10)
+#define IP_VS_SO_SET_STARTDAEMON (IP_VS_BASE_CTL+11)
+#define IP_VS_SO_SET_STOPDAEMON (IP_VS_BASE_CTL+12)
+#define IP_VS_SO_SET_RESTORE    (IP_VS_BASE_CTL+13)
+#define IP_VS_SO_SET_SAVE       (IP_VS_BASE_CTL+14)
+#define IP_VS_SO_SET_ZERO       (IP_VS_BASE_CTL+15)
+#define IP_VS_SO_SET_MAX        IP_VS_SO_SET_ZERO
+
+#define IP_VS_SO_GET_VERSION    IP_VS_BASE_CTL
+#define IP_VS_SO_GET_INFO       (IP_VS_BASE_CTL+1)
+#define IP_VS_SO_GET_SERVICES   (IP_VS_BASE_CTL+2)
+#define IP_VS_SO_GET_SERVICE    (IP_VS_BASE_CTL+3)
+#define IP_VS_SO_GET_DESTS      (IP_VS_BASE_CTL+4)
+#define IP_VS_SO_GET_DEST       (IP_VS_BASE_CTL+5)      /* not used now */
+#define IP_VS_SO_GET_TIMEOUT    (IP_VS_BASE_CTL+6)
+#define IP_VS_SO_GET_DAEMON     (IP_VS_BASE_CTL+7)
+#define IP_VS_SO_GET_MAX        IP_VS_SO_GET_DAEMON
+
+
+/*
+ *      IPVS Connection Flags
+ */
+#define IP_VS_CONN_F_FWD_MASK   0x0007          /* mask for the fwd methods */
+#define IP_VS_CONN_F_MASQ       0x0000          /* masquerading/NAT */
+#define IP_VS_CONN_F_LOCALNODE  0x0001          /* local node */
+#define IP_VS_CONN_F_TUNNEL     0x0002          /* tunneling */
+#define IP_VS_CONN_F_DROUTE     0x0003          /* direct routing */
+#define IP_VS_CONN_F_BYPASS     0x0004          /* cache bypass */
+#define IP_VS_CONN_F_SYNC       0x0020          /* entry created by sync */
+#define IP_VS_CONN_F_HASHED     0x0040          /* hashed entry */
+#define IP_VS_CONN_F_NOOUTPUT   0x0080          /* no output packets */
+#define IP_VS_CONN_F_INACTIVE   0x0100          /* not established */
+#define IP_VS_CONN_F_OUT_SEQ    0x0200          /* must do output seq adjust */
+#define IP_VS_CONN_F_IN_SEQ     0x0400          /* must do input seq adjust */
+#define IP_VS_CONN_F_SEQ_MASK   0x0600          /* in/out sequence mask */
+#define IP_VS_CONN_F_NO_CPORT   0x0800          /* no client port set yet */
+#define IP_VS_CONN_F_TEMPLATE   0x1000          /* template, not connection */
+
+#define IP_VS_SCHEDNAME_MAXLEN  16
+#define IP_VS_IFNAME_MAXLEN     16
+
+
+/*
+ *      The struct ip_vs_service_user and struct ip_vs_dest_user are
+ *      used to set IPVS rules through setsockopt.
+ */
+struct ip_vs_service_user {
+        /* virtual service addresses */
+        u_int16_t               protocol;
+        __be32                  addr;           /* virtual ip address */
+        __be16                  port;
+        u_int32_t               fwmark;         /* firwall mark of service */
+
+        /* virtual service options */
+        char                    sched_name[IP_VS_SCHEDNAME_MAXLEN];
+        unsigned                flags;          /* virtual service flags */
+        unsigned                timeout;        /* persistent timeout in sec */
+        __be32                  netmask;        /* persistent netmask */
+};
+
+
+struct ip_vs_dest_user {
+        /* destination server address */
+        __be32                  addr;
+        __be16                  port;
+
+        /* real server options */
+        unsigned                conn_flags;     /* connection flags */
+        int                     weight;         /* destination weight */
+
+        /* thresholds for active connections */
+        u_int32_t               u_threshold;    /* upper threshold */
+        u_int32_t               l_threshold;    /* lower threshold */
+};
+
+
+/*
+ *      IPVS statistics object (for user space)
+ */
+struct ip_vs_stats_user
+{
+        __u32                   conns;          /* connections scheduled */
+        __u32                   inpkts;         /* incoming packets */
+        __u32                   outpkts;        /* outgoing packets */
+        __u64                   inbytes;        /* incoming bytes */
+        __u64                   outbytes;       /* outgoing bytes */
+
+        __u32                   cps;            /* current connection rate */
+        __u32                   inpps;          /* current in packet rate */
+        __u32                   outpps;         /* current out packet rate */
+        __u32                   inbps;          /* current in byte rate */
+        __u32                   outbps;         /* current out byte rate */
+};
+
+
+/* The argument to IP_VS_SO_GET_INFO */
+struct ip_vs_getinfo {
+        /* version number */
+        unsigned int            version;
+
+        /* size of connection hash table */
+        unsigned int            size;
+
+        /* number of virtual services */
+        unsigned int            num_services;
+};
+
+
+/* The argument to IP_VS_SO_GET_SERVICE */
+struct ip_vs_service_entry {
+        /* which service: user fills in these */
+        u_int16_t               protocol;
+        __be32                  addr;           /* virtual address */
+        __be16                  port;
+        u_int32_t               fwmark;         /* firwall mark of service */
+
+        /* service options */
+        char                    sched_name[IP_VS_SCHEDNAME_MAXLEN];
+        unsigned                flags;          /* virtual service flags */
+        unsigned                timeout;        /* persistent timeout */
+        __be32                  netmask;        /* persistent netmask */
+
+        /* number of real servers */
+        unsigned int            num_dests;
+
+        /* statistics */
+        struct ip_vs_stats_user stats;
+};
+
+
+struct ip_vs_dest_entry {
+        __be32                  addr;           /* destination address */
+        __be16                  port;
+        unsigned                conn_flags;     /* connection flags */
+        int                     weight;         /* destination weight */
+
+        u_int32_t               u_threshold;    /* upper threshold */
+        u_int32_t               l_threshold;    /* lower threshold */
+
+        u_int32_t               activeconns;    /* active connections */
+        u_int32_t               inactconns;     /* inactive connections */
+        u_int32_t               persistconns;   /* persistent connections */
+
+        /* statistics */
+        struct ip_vs_stats_user stats;
+};
+
+
+/* The argument to IP_VS_SO_GET_DESTS */
+struct ip_vs_get_dests {
+        /* which service: user fills in these */
+        u_int16_t               protocol;
+        __be32                  addr;           /* virtual address */
+        __be16                  port;
+        u_int32_t               fwmark;         /* firwall mark of service */
+
+        /* number of real servers */
+        unsigned int            num_dests;
+
+        /* the real servers */
+        struct ip_vs_dest_entry entrytable[0];
+};
+
+
+/* The argument to IP_VS_SO_GET_SERVICES */
+struct ip_vs_get_services {
+        /* number of virtual services */
+        unsigned int            num_services;
+
+        /* service table */
+        struct ip_vs_service_entry entrytable[0];
+};
+
+
+/* The argument to IP_VS_SO_GET_TIMEOUT */
+struct ip_vs_timeout_user {
+        int                     tcp_timeout;
+        int                     tcp_fin_timeout;
+        int                     udp_timeout;
+};
+
+
+/* The argument to IP_VS_SO_GET_DAEMON */
+struct ip_vs_daemon_user {
+        /* sync daemon state (master/backup) */
+        int                     state;
+
+        /* multicast interface name */
+        char                    mcast_ifn[IP_VS_IFNAME_MAXLEN];
+
+        /* SyncID we belong to */
+        int                     syncid;
+};
+
+#endif  /* _IP_VS_H */
diff --git a/include/linux/kallsyms.h b/include/linux/kallsyms.h
index 57aefa160a92..b96144887444 100644
--- a/include/linux/kallsyms.h
+++ b/include/linux/kallsyms.h
@@ -108,8 +108,7 @@ static inline void print_fn_descriptor_symbol(const char *fmt, void *addr)
 
 static inline void print_ip_sym(unsigned long ip)
 {
-        printk("[<%p>]", (void *) ip);
-        print_symbol(" %s\n", ip);
+        printk("[<%p>] %pS\n", (void *) ip, (void *) ip);
 }
 
 #endif /*_LINUX_KALLSYMS_H*/
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index fdbbf72ca2eb..aaa998f65c7a 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -75,6 +75,12 @@ extern const char linux_proc_banner[];
  */
 #define upper_32_bits(n) ((u32)(((n) >> 16) >> 16))
 
+/**
+ * lower_32_bits - return bits 0-31 of a number
+ * @n: the number we're accessing
+ */
+#define lower_32_bits(n) ((u32)(n))
+
 #define KERN_EMERG      "<0>"   /* system is unusable                   */
 #define KERN_ALERT      "<1>"   /* action must be taken immediately     */
 #define KERN_CRIT       "<2>"   /* critical conditions                  */
diff --git a/include/linux/maple.h b/include/linux/maple.h
index d31e36ebb436..c853b1066018 100644
--- a/include/linux/maple.h
+++ b/include/linux/maple.h
@@ -2,6 +2,7 @@
 #define __LINUX_MAPLE_H
 
 #include <linux/device.h>
+#include <mach/maple.h>
 
 extern struct bus_type maple_bus_type;
 
@@ -33,6 +34,7 @@ struct mapleq {
         void *sendbuf, *recvbuf, *recvbufdcsp;
         unsigned char length;
         enum maple_code command;
+        struct mutex mutex;
 };
 
 struct maple_devinfo {
@@ -61,8 +63,6 @@ struct maple_device {
 
 struct maple_driver {
         unsigned long function;
-        int (*connect) (struct maple_device * dev);
-        void (*disconnect) (struct maple_device * dev);
         struct device_driver drv;
 };
 
@@ -71,7 +71,9 @@ void maple_getcond_callback(struct maple_device *dev,
                             unsigned long interval,
                             unsigned long function);
 int maple_driver_register(struct device_driver *drv);
-void maple_add_packet(struct mapleq *mq);
+int maple_add_packet_sleeps(struct maple_device *mdev, u32 function,
+        u32 command, u32 length, void *data);
+void maple_clear_dev(struct maple_device *mdev);
 
 #define to_maple_dev(n) container_of(n, struct maple_device, dev)
 #define to_maple_driver(n) container_of(n, struct maple_driver, drv)
diff --git a/include/linux/mfd/core.h b/include/linux/mfd/core.h
index bb3dd0545928..49ef857cdb2d 100644
--- a/include/linux/mfd/core.h
+++ b/include/linux/mfd/core.h
@@ -1,5 +1,3 @@
-#ifndef MFD_CORE_H
-#define MFD_CORE_H
 /*
  * drivers/mfd/mfd-core.h
  *
@@ -13,6 +11,9 @@
  *
  */
 
+#ifndef MFD_CORE_H
+#define MFD_CORE_H
+
 #include <linux/platform_device.h>
 
 /*
@@ -28,7 +29,13 @@ struct mfd_cell {
         int                     (*suspend)(struct platform_device *dev);
         int                     (*resume)(struct platform_device *dev);
 
-        void                    *driver_data; /* driver-specific data */
+        /* driver-specific data for MFD-aware "cell" drivers */
+        void                    *driver_data;
+
+        /* platform_data can be used to either pass data to "generic"
+           driver or as a hook to mfd_cell for the "cell" drivers */
+        void                    *platform_data;
+        size_t                  data_size;
 
         /*
          * This resources can be specified relatievly to the parent device.
@@ -38,18 +45,11 @@ struct mfd_cell {
         const struct resource   *resources;
 };
 
-static inline struct mfd_cell *
-mfd_get_cell(struct platform_device *pdev)
-{
-        return (struct mfd_cell *)pdev->dev.platform_data;
-}
-
-extern int mfd_add_devices(
-                struct platform_device *parent,
-                const struct mfd_cell *cells, int n_devs,
-                struct resource *mem_base,
-                int irq_base);
+extern int mfd_add_devices(struct device *parent, int id,
+                           const struct mfd_cell *cells, int n_devs,
+                           struct resource *mem_base,
+                           int irq_base);
 
-extern void mfd_remove_devices(struct platform_device *parent);
+extern void mfd_remove_devices(struct device *parent);
 
 #endif
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 6e695eaab4ce..335288bff1b7 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -744,6 +744,8 @@ struct zap_details {
 struct page *vm_normal_page(struct vm_area_struct *vma, unsigned long addr,
                 pte_t pte);
 
+int zap_vma_ptes(struct vm_area_struct *vma, unsigned long address,
+                unsigned long size);
 unsigned long zap_page_range(struct vm_area_struct *vma, unsigned long address,
                 unsigned long size, struct zap_details *);
 unsigned long unmap_vmas(struct mmu_gather **tlb,
@@ -1041,7 +1043,6 @@ extern unsigned long absent_pages_in_range(unsigned long start_pfn,
 extern void get_pfn_range_for_nid(unsigned int nid,
                         unsigned long *start_pfn, unsigned long *end_pfn);
 extern unsigned long find_min_pfn_with_active_regions(void);
-extern unsigned long find_max_pfn_with_active_regions(void);
 extern void free_bootmem_with_active_regions(int nid,
                                                 unsigned long max_low_pfn);
 typedef int (*work_fn_t)(unsigned long, unsigned long, void *);
@@ -1104,6 +1105,9 @@ extern struct vm_area_struct *copy_vma(struct vm_area_struct **,
         unsigned long addr, unsigned long len, pgoff_t pgoff);
 extern void exit_mmap(struct mm_struct *);
 
+extern int mm_take_all_locks(struct mm_struct *mm);
+extern void mm_drop_all_locks(struct mm_struct *mm);
+
 #ifdef CONFIG_PROC_FS
 /* From fs/proc/base.c. callers must _not_ hold the mm's exe_file_lock */
 extern void added_exe_file_vma(struct mm_struct *mm);
diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h
index 746f975b58ef..386edbe2cb4e 100644
--- a/include/linux/mm_types.h
+++ b/include/linux/mm_types.h
@@ -10,6 +10,7 @@
 #include <linux/rbtree.h>
 #include <linux/rwsem.h>
 #include <linux/completion.h>
+#include <linux/cpumask.h>
 #include <asm/page.h>
 #include <asm/mmu.h>
 
@@ -253,6 +254,9 @@ struct mm_struct {
         struct file *exe_file;
         unsigned long num_exe_file_vmas;
 #endif
+#ifdef CONFIG_MMU_NOTIFIER
+        struct mmu_notifier_mm *mmu_notifier_mm;
+#endif
 };
 
 #endif /* _LINUX_MM_TYPES_H */
diff --git a/include/linux/mmu_notifier.h b/include/linux/mmu_notifier.h
new file mode 100644
index 000000000000..b77486d152cd
--- /dev/null
+++ b/include/linux/mmu_notifier.h
@@ -0,0 +1,279 @@
+#ifndef _LINUX_MMU_NOTIFIER_H
+#define _LINUX_MMU_NOTIFIER_H
+
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/mm_types.h>
+
+struct mmu_notifier;
+struct mmu_notifier_ops;
+
+#ifdef CONFIG_MMU_NOTIFIER
+
+/*
+ * The mmu notifier_mm structure is allocated and installed in
+ * mm->mmu_notifier_mm inside the mm_take_all_locks() protected
+ * critical section and it's released only when mm_count reaches zero
+ * in mmdrop().
+ */
+struct mmu_notifier_mm {
+        /* all mmu notifiers registerd in this mm are queued in this list */
+        struct hlist_head list;
+        /* to serialize the list modifications and hlist_unhashed */
+        spinlock_t lock;
+};
+
+struct mmu_notifier_ops {
+        /*
+         * Called either by mmu_notifier_unregister or when the mm is
+         * being destroyed by exit_mmap, always before all pages are
+         * freed. This can run concurrently with other mmu notifier
+         * methods (the ones invoked outside the mm context) and it
+         * should tear down all secondary mmu mappings and freeze the
+         * secondary mmu. If this method isn't implemented you've to
+         * be sure that nothing could possibly write to the pages
+         * through the secondary mmu by the time the last thread with
+         * tsk->mm == mm exits.
+         *
+         * As side note: the pages freed after ->release returns could
+         * be immediately reallocated by the gart at an alias physical
+         * address with a different cache model, so if ->release isn't
+         * implemented because all _software_ driven memory accesses
+         * through the secondary mmu are terminated by the time the
+         * last thread of this mm quits, you've also to be sure that
+         * speculative _hardware_ operations can't allocate dirty
+         * cachelines in the cpu that could not be snooped and made
+         * coherent with the other read and write operations happening
+         * through the gart alias address, so leading to memory
+         * corruption.
+         */
+        void (*release)(struct mmu_notifier *mn,
+                        struct mm_struct *mm);
+
+        /*
+         * clear_flush_young is called after the VM is
+         * test-and-clearing the young/accessed bitflag in the
+         * pte. This way the VM will provide proper aging to the
+         * accesses to the page through the secondary MMUs and not
+         * only to the ones through the Linux pte.
+         */
+        int (*clear_flush_young)(struct mmu_notifier *mn,
+                                 struct mm_struct *mm,
+                                 unsigned long address);
+
+        /*
+         * Before this is invoked any secondary MMU is still ok to
+         * read/write to the page previously pointed to by the Linux
+         * pte because the page hasn't been freed yet and it won't be
+         * freed until this returns. If required set_page_dirty has to
+         * be called internally to this method.
+         */
+        void (*invalidate_page)(struct mmu_notifier *mn,
+                                struct mm_struct *mm,
+                                unsigned long address);
+
+        /*
+         * invalidate_range_start() and invalidate_range_end() must be
+         * paired and are called only when the mmap_sem and/or the
+         * locks protecting the reverse maps are held. The subsystem
+         * must guarantee that no additional references are taken to
+         * the pages in the range established between the call to
+         * invalidate_range_start() and the matching call to
+         * invalidate_range_end().
+         *
+         * Invalidation of multiple concurrent ranges may be
+         * optionally permitted by the driver. Either way the
+         * establishment of sptes is forbidden in the range passed to
+         * invalidate_range_begin/end for the whole duration of the
+         * invalidate_range_begin/end critical section.
+         *
+         * invalidate_range_start() is called when all pages in the
+         * range are still mapped and have at least a refcount of one.
+         *
+         * invalidate_range_end() is called when all pages in the
+         * range have been unmapped and the pages have been freed by
+         * the VM.
+         *
+         * The VM will remove the page table entries and potentially
+         * the page between invalidate_range_start() and
+         * invalidate_range_end(). If the page must not be freed
+         * because of pending I/O or other circumstances then the
+         * invalidate_range_start() callback (or the initial mapping
+         * by the driver) must make sure that the refcount is kept
+         * elevated.
+         *
+         * If the driver increases the refcount when the pages are
+         * initially mapped into an address space then either
+         * invalidate_range_start() or invalidate_range_end() may
+         * decrease the refcount. If the refcount is decreased on
+         * invalidate_range_start() then the VM can free pages as page
+         * table entries are removed.  If the refcount is only
+         * droppped on invalidate_range_end() then the driver itself
+         * will drop the last refcount but it must take care to flush
+         * any secondary tlb before doing the final free on the
+         * page. Pages will no longer be referenced by the linux
+         * address space but may still be referenced by sptes until
+         * the last refcount is dropped.
+         */
+        void (*invalidate_range_start)(struct mmu_notifier *mn,
+                                       struct mm_struct *mm,
+                                       unsigned long start, unsigned long end);
+        void (*invalidate_range_end)(struct mmu_notifier *mn,
+                                     struct mm_struct *mm,
+                                     unsigned long start, unsigned long end);
+};
+
+/*
+ * The notifier chains are protected by mmap_sem and/or the reverse map
+ * semaphores. Notifier chains are only changed when all reverse maps and
+ * the mmap_sem locks are taken.
+ *
+ * Therefore notifier chains can only be traversed when either
+ *
+ * 1. mmap_sem is held.
+ * 2. One of the reverse map locks is held (i_mmap_lock or anon_vma->lock).
+ * 3. No other concurrent thread can access the list (release)
+ */
+struct mmu_notifier {
+        struct hlist_node hlist;
+        const struct mmu_notifier_ops *ops;
+};
+
+static inline int mm_has_notifiers(struct mm_struct *mm)
+{
+        return unlikely(mm->mmu_notifier_mm);
+}
+
+extern int mmu_notifier_register(struct mmu_notifier *mn,
+                                 struct mm_struct *mm);
+extern int __mmu_notifier_register(struct mmu_notifier *mn,
+                                   struct mm_struct *mm);
+extern void mmu_notifier_unregister(struct mmu_notifier *mn,
+                                    struct mm_struct *mm);
+extern void __mmu_notifier_mm_destroy(struct mm_struct *mm);
+extern void __mmu_notifier_release(struct mm_struct *mm);
+extern int __mmu_notifier_clear_flush_young(struct mm_struct *mm,
+                                          unsigned long address);
+extern void __mmu_notifier_invalidate_page(struct mm_struct *mm,
+                                          unsigned long address);
+extern void __mmu_notifier_invalidate_range_start(struct mm_struct *mm,
+                                  unsigned long start, unsigned long end);
+extern void __mmu_notifier_invalidate_range_end(struct mm_struct *mm,
+                                  unsigned long start, unsigned long end);
+
+static inline void mmu_notifier_release(struct mm_struct *mm)
+{
+        if (mm_has_notifiers(mm))
+                __mmu_notifier_release(mm);
+}
+
+static inline int mmu_notifier_clear_flush_young(struct mm_struct *mm,
+                                          unsigned long address)
+{
+        if (mm_has_notifiers(mm))
+                return __mmu_notifier_clear_flush_young(mm, address);
+        return 0;
+}
+
+static inline void mmu_notifier_invalidate_page(struct mm_struct *mm,
+                                          unsigned long address)
+{
+        if (mm_has_notifiers(mm))
+                __mmu_notifier_invalidate_page(mm, address);
+}
+
+static inline void mmu_notifier_invalidate_range_start(struct mm_struct *mm,
+                                  unsigned long start, unsigned long end)
+{
+        if (mm_has_notifiers(mm))
+                __mmu_notifier_invalidate_range_start(mm, start, end);
+}
+
+static inline void mmu_notifier_invalidate_range_end(struct mm_struct *mm,
+                                  unsigned long start, unsigned long end)
+{
+        if (mm_has_notifiers(mm))
+                __mmu_notifier_invalidate_range_end(mm, start, end);
+}
+
+static inline void mmu_notifier_mm_init(struct mm_struct *mm)
+{
+        mm->mmu_notifier_mm = NULL;
+}
+
+static inline void mmu_notifier_mm_destroy(struct mm_struct *mm)
+{
+        if (mm_has_notifiers(mm))
+                __mmu_notifier_mm_destroy(mm);
+}
+
+/*
+ * These two macros will sometime replace ptep_clear_flush.
+ * ptep_clear_flush is impleemnted as macro itself, so this also is
+ * implemented as a macro until ptep_clear_flush will converted to an
+ * inline function, to diminish the risk of compilation failure. The
+ * invalidate_page method over time can be moved outside the PT lock
+ * and these two macros can be later removed.
+ */
+#define ptep_clear_flush_notify(__vma, __address, __ptep)               \
+({                                                                      \
+        pte_t __pte;                                                    \
+        struct vm_area_struct *___vma = __vma;                          \
+        unsigned long ___address = __address;                           \
+        __pte = ptep_clear_flush(___vma, ___address, __ptep);           \
+        mmu_notifier_invalidate_page(___vma->vm_mm, ___address);        \
+        __pte;                                                          \
+})
+
+#define ptep_clear_flush_young_notify(__vma, __address, __ptep)         \
+({                                                                      \
+        int __young;                                                    \
+        struct vm_area_struct *___vma = __vma;                          \
+        unsigned long ___address = __address;                           \
+        __young = ptep_clear_flush_young(___vma, ___address, __ptep);   \
+        __young |= mmu_notifier_clear_flush_young(___vma->vm_mm,        \
+                                                  ___address);          \
+        __young;                                                        \
+})
+
+#else /* CONFIG_MMU_NOTIFIER */
+
+static inline void mmu_notifier_release(struct mm_struct *mm)
+{
+}
+
+static inline int mmu_notifier_clear_flush_young(struct mm_struct *mm,
+                                          unsigned long address)
+{
+        return 0;
+}
+
+static inline void mmu_notifier_invalidate_page(struct mm_struct *mm,
+                                          unsigned long address)
+{
+}
+
+static inline void mmu_notifier_invalidate_range_start(struct mm_struct *mm,
+                                  unsigned long start, unsigned long end)
+{
+}
+
+static inline void mmu_notifier_invalidate_range_end(struct mm_struct *mm,
+                                  unsigned long start, unsigned long end)
+{
+}
+
+static inline void mmu_notifier_mm_init(struct mm_struct *mm)
+{
+}
+
+static inline void mmu_notifier_mm_destroy(struct mm_struct *mm)
+{
+}
+
+#define ptep_clear_flush_young_notify ptep_clear_flush_young
+#define ptep_clear_flush_notify ptep_clear_flush
+
+#endif /* CONFIG_MMU_NOTIFIER */
+
+#endif /* _LINUX_MMU_NOTIFIER_H */
diff --git a/include/linux/mount.h b/include/linux/mount.h
index b5efaa2132ab..30a1d63b6fb5 100644
--- a/include/linux/mount.h
+++ b/include/linux/mount.h
@@ -105,7 +105,8 @@ extern struct vfsmount *vfs_kern_mount(struct file_system_type *type,
 
 struct nameidata;
 
-extern int do_add_mount(struct vfsmount *newmnt, struct nameidata *nd,
+struct path;
+extern int do_add_mount(struct vfsmount *newmnt, struct path *path,
                         int mnt_flags, struct list_head *fslist);
 
 extern void mark_mounts_for_expiry(struct list_head *mounts);
diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
index 4ed40caff4e5..922636548558 100644
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -272,7 +272,11 @@ static inline void mtd_erase_callback(struct erase_info *instr)
                         printk(KERN_INFO args);         \
         } while(0)
 #else /* CONFIG_MTD_DEBUG */
-#define DEBUG(n, args...) do { } while(0)
+#define DEBUG(n, args...)                               \
+        do {                                            \
+                if (0)                                  \
+                        printk(KERN_INFO args);         \
+        } while(0)
 
 #endif /* CONFIG_MTD_DEBUG */
 
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 83f678702dff..81774e5facf4 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -177,7 +177,9 @@ typedef enum {
 #define NAND_MUST_PAD(chip) (!(chip->options & NAND_NO_PADDING))
 #define NAND_HAS_CACHEPROG(chip) ((chip->options & NAND_CACHEPRG))
 #define NAND_HAS_COPYBACK(chip) ((chip->options & NAND_COPYBACK))
-#define NAND_SUBPAGE_READ(chip) ((chip->ecc.mode == NAND_ECC_SOFT))
+/* Large page NAND with SOFT_ECC should support subpage reads */
+#define NAND_SUBPAGE_READ(chip) ((chip->ecc.mode == NAND_ECC_SOFT) \
+                                        && (chip->page_shift > 9))
 
 /* Mask to zero out the chip options, which come from the id table */
 #define NAND_CHIPOPTIONS_MSK    (0x0000ffff & ~NAND_NO_AUTOINCR)
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index b4d056ceab96..ee583f642a9f 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -440,6 +440,7 @@ static inline void napi_synchronize(const struct napi_struct *n)
 enum netdev_queue_state_t
 {
         __QUEUE_STATE_XOFF,
+        __QUEUE_STATE_FROZEN,
 };
 
 struct netdev_queue {
@@ -636,7 +637,7 @@ struct net_device
         unsigned int            real_num_tx_queues;
 
         unsigned long           tx_queue_len;   /* Max frames per queue allowed */
-
+        spinlock_t              tx_global_lock;
 /*
  * One part is mostly used on xmit path (device)
  */
@@ -1099,6 +1100,11 @@ static inline int netif_queue_stopped(const struct net_device *dev)
         return netif_tx_queue_stopped(netdev_get_tx_queue(dev, 0));
 }
 
+static inline int netif_tx_queue_frozen(const struct netdev_queue *dev_queue)
+{
+        return test_bit(__QUEUE_STATE_FROZEN, &dev_queue->state);
+}
+
 /**
  *      netif_running - test if up
  *      @dev: network device
@@ -1475,6 +1481,26 @@ static inline void __netif_tx_lock_bh(struct netdev_queue *txq)
         txq->xmit_lock_owner = smp_processor_id();
 }
 
+static inline int __netif_tx_trylock(struct netdev_queue *txq)
+{
+        int ok = spin_trylock(&txq->_xmit_lock);
+        if (likely(ok))
+                txq->xmit_lock_owner = smp_processor_id();
+        return ok;
+}
+
+static inline void __netif_tx_unlock(struct netdev_queue *txq)
+{
+        txq->xmit_lock_owner = -1;
+        spin_unlock(&txq->_xmit_lock);
+}
+
+static inline void __netif_tx_unlock_bh(struct netdev_queue *txq)
+{
+        txq->xmit_lock_owner = -1;
+        spin_unlock_bh(&txq->_xmit_lock);
+}
+
 /**
  *      netif_tx_lock - grab network device transmit lock
  *      @dev: network device
@@ -1484,12 +1510,23 @@ static inline void __netif_tx_lock_bh(struct netdev_queue *txq)
  */
 static inline void netif_tx_lock(struct net_device *dev)
 {
-        int cpu = smp_processor_id();
         unsigned int i;
+        int cpu;
 
+        spin_lock(&dev->tx_global_lock);
+        cpu = smp_processor_id();
         for (i = 0; i < dev->num_tx_queues; i++) {
                 struct netdev_queue *txq = netdev_get_tx_queue(dev, i);
+
+                /* We are the only thread of execution doing a
+                 * freeze, but we have to grab the _xmit_lock in
+                 * order to synchronize with threads which are in
+                 * the ->hard_start_xmit() handler and already
+                 * checked the frozen bit.
+                 */
                 __netif_tx_lock(txq, cpu);
+                set_bit(__QUEUE_STATE_FROZEN, &txq->state);
+                __netif_tx_unlock(txq);
         }
 }
 
@@ -1499,40 +1536,22 @@ static inline void netif_tx_lock_bh(struct net_device *dev)
         netif_tx_lock(dev);
 }
 
-static inline int __netif_tx_trylock(struct netdev_queue *txq)
-{
-        int ok = spin_trylock(&txq->_xmit_lock);
-        if (likely(ok))
-                txq->xmit_lock_owner = smp_processor_id();
-        return ok;
-}
-
-static inline int netif_tx_trylock(struct net_device *dev)
-{
-        return __netif_tx_trylock(netdev_get_tx_queue(dev, 0));
-}
-
-static inline void __netif_tx_unlock(struct netdev_queue *txq)
-{
-        txq->xmit_lock_owner = -1;
-        spin_unlock(&txq->_xmit_lock);
-}
-
-static inline void __netif_tx_unlock_bh(struct netdev_queue *txq)
-{
-        txq->xmit_lock_owner = -1;
-        spin_unlock_bh(&txq->_xmit_lock);
-}
-
 static inline void netif_tx_unlock(struct net_device *dev)
 {
         unsigned int i;
 
         for (i = 0; i < dev->num_tx_queues; i++) {
                 struct netdev_queue *txq = netdev_get_tx_queue(dev, i);
-                __netif_tx_unlock(txq);
-        }
 
+                /* No need to grab the _xmit_lock here.  If the
+                 * queue is not stopped for another reason, we
+                 * force a schedule.
+                 */
+                clear_bit(__QUEUE_STATE_FROZEN, &txq->state);
+                if (!test_bit(__QUEUE_STATE_XOFF, &txq->state))
+                        __netif_schedule(txq->qdisc);
+        }
+        spin_unlock(&dev->tx_global_lock);
 }
 
 static inline void netif_tx_unlock_bh(struct net_device *dev)
@@ -1556,13 +1575,18 @@ static inline void netif_tx_unlock_bh(struct net_device *dev)
 static inline void netif_tx_disable(struct net_device *dev)
 {
         unsigned int i;
+        int cpu;
 
-        netif_tx_lock_bh(dev);
+        local_bh_disable();
+        cpu = smp_processor_id();
         for (i = 0; i < dev->num_tx_queues; i++) {
                 struct netdev_queue *txq = netdev_get_tx_queue(dev, i);
+
+                __netif_tx_lock(txq, cpu);
                 netif_tx_stop_queue(txq);
+                __netif_tx_unlock(txq);
         }
-        netif_tx_unlock_bh(dev);
+        local_bh_enable();
 }
 
 static inline void netif_addr_lock(struct net_device *dev)
diff --git a/include/linux/netfilter/nf_conntrack_tcp.h b/include/linux/netfilter/nf_conntrack_tcp.h
index 22ce29995f13..a049df4f2236 100644
--- a/include/linux/netfilter/nf_conntrack_tcp.h
+++ b/include/linux/netfilter/nf_conntrack_tcp.h
@@ -30,6 +30,9 @@ enum tcp_conntrack {
 /* Be liberal in window checking */
 #define IP_CT_TCP_FLAG_BE_LIBERAL               0x08
 
+/* Has unacknowledged data */
+#define IP_CT_TCP_FLAG_DATA_UNACKNOWLEDGED      0x10
+
 struct nf_ct_tcp_flags {
         u_int8_t flags;
         u_int8_t mask;
diff --git a/include/linux/of.h b/include/linux/of.h
index 59a61bdc98b6..79886ade070f 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -70,5 +70,6 @@ extern int of_n_addr_cells(struct device_node *np);
 extern int of_n_size_cells(struct device_node *np);
 extern const struct of_device_id *of_match_node(
         const struct of_device_id *matches, const struct device_node *node);
+extern int of_modalias_node(struct device_node *node, char *modalias, int len);
 
 #endif /* _LINUX_OF_H */
diff --git a/include/linux/of_spi.h b/include/linux/of_spi.h
new file mode 100644
index 000000000000..5f71ee8c0868
--- /dev/null
+++ b/include/linux/of_spi.h
@@ -0,0 +1,18 @@
+/*
+ * OpenFirmware SPI support routines
+ * Copyright (C) 2008 Secret Lab Technologies Ltd.
+ *
+ * Support routines for deriving SPI device attachments from the device
+ * tree.
+ */
+
+#ifndef __LINUX_OF_SPI_H
+#define __LINUX_OF_SPI_H
+
+#include <linux/of.h>
+#include <linux/spi/spi.h>
+
+extern void of_register_spi_devices(struct spi_master *master,
+                                    struct device_node *np);
+
+#endif /* __LINUX_OF_SPI */
diff --git a/include/linux/page-flags.h b/include/linux/page-flags.h
index 54590a9a103e..25aaccdb2f26 100644
--- a/include/linux/page-flags.h
+++ b/include/linux/page-flags.h
@@ -239,9 +239,6 @@ static inline void __SetPageUptodate(struct page *page)
 {
         smp_wmb();
         __set_bit(PG_uptodate, &(page)->flags);
-#ifdef CONFIG_S390
-        page_clear_dirty(page);
-#endif
 }
 
 static inline void SetPageUptodate(struct page *page)
diff --git a/include/linux/pagemap.h b/include/linux/pagemap.h
index a81d81890422..69ed3cb1197a 100644
--- a/include/linux/pagemap.h
+++ b/include/linux/pagemap.h
@@ -20,6 +20,7 @@
  */
 #define AS_EIO          (__GFP_BITS_SHIFT + 0)  /* IO error on async write */
 #define AS_ENOSPC       (__GFP_BITS_SHIFT + 1)  /* ENOSPC on async write */
+#define AS_MM_ALL_LOCKS (__GFP_BITS_SHIFT + 2)  /* under mm_take_all_locks() */
 
 static inline void mapping_set_error(struct address_space *mapping, int error)
 {
@@ -142,6 +143,29 @@ static inline int page_cache_get_speculative(struct page *page)
         return 1;
 }
 
+/*
+ * Same as above, but add instead of inc (could just be merged)
+ */
+static inline int page_cache_add_speculative(struct page *page, int count)
+{
+        VM_BUG_ON(in_interrupt());
+
+#if !defined(CONFIG_SMP) && defined(CONFIG_CLASSIC_RCU)
+# ifdef CONFIG_PREEMPT
+        VM_BUG_ON(!in_atomic());
+# endif
+        VM_BUG_ON(page_count(page) == 0);
+        atomic_add(count, &page->_count);
+
+#else
+        if (unlikely(!atomic_add_unless(&page->_count, count, 0)))
+                return 0;
+#endif
+        VM_BUG_ON(PageCompound(page) && page != compound_head(page));
+
+        return 1;
+}
+
 static inline int page_freeze_refs(struct page *page, int count)
 {
         return likely(atomic_cmpxchg(&page->_count, count, 0) == count);
diff --git a/include/linux/pci-aspm.h b/include/linux/pci-aspm.h
index a1a1e618e996..91ba0b338b47 100644
--- a/include/linux/pci-aspm.h
+++ b/include/linux/pci-aspm.h
@@ -27,6 +27,7 @@ extern void pcie_aspm_init_link_state(struct pci_dev *pdev);
 extern void pcie_aspm_exit_link_state(struct pci_dev *pdev);
 extern void pcie_aspm_pm_state_change(struct pci_dev *pdev);
 extern void pci_disable_link_state(struct pci_dev *pdev, int state);
+extern void pcie_no_aspm(void);
 #else
 static inline void pcie_aspm_init_link_state(struct pci_dev *pdev)
 {
@@ -40,6 +41,10 @@ static inline void pcie_aspm_pm_state_change(struct pci_dev *pdev)
 static inline void pci_disable_link_state(struct pci_dev *pdev, int state)
 {
 }
+
+static inline void pcie_no_aspm(void)
+{
+}
 #endif
 
 #ifdef CONFIG_PCIEASPM_DEBUG /* this depends on CONFIG_PCIEASPM */
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 1d296d31abe0..825be3878f68 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -124,6 +124,8 @@ enum pci_dev_flags {
          * generation too.
          */
         PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG = (__force pci_dev_flags_t) 1,
+        /* Device configuration is irrevocably lost if disabled into D3 */
+        PCI_DEV_FLAGS_NO_D3 = (__force pci_dev_flags_t) 2,
 };
 
 typedef unsigned short __bitwise pci_bus_flags_t;
diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h
index 19958b929905..450684f7eaac 100644
--- a/include/linux/pci_regs.h
+++ b/include/linux/pci_regs.h
@@ -374,6 +374,7 @@
 #define  PCI_EXP_DEVCAP_ATN_BUT 0x1000  /* Attention Button Present */
 #define  PCI_EXP_DEVCAP_ATN_IND 0x2000  /* Attention Indicator Present */
 #define  PCI_EXP_DEVCAP_PWR_IND 0x4000  /* Power Indicator Present */
+#define  PCI_EXP_DEVCAP_RBER    0x8000  /* Role-Based Error Reporting */
 #define  PCI_EXP_DEVCAP_PWR_VAL 0x3fc0000 /* Slot Power Limit Value */
 #define  PCI_EXP_DEVCAP_PWR_SCL 0xc000000 /* Slot Power Limit Scale */
 #define PCI_EXP_DEVCTL          8       /* Device Control */
diff --git a/include/linux/power_supply.h b/include/linux/power_supply.h
index 68ed19ccf1f7..ea96ead1d39d 100644
--- a/include/linux/power_supply.h
+++ b/include/linux/power_supply.h
@@ -78,6 +78,7 @@ enum power_supply_property {
         POWER_SUPPLY_PROP_CHARGE_EMPTY,
         POWER_SUPPLY_PROP_CHARGE_NOW,
         POWER_SUPPLY_PROP_CHARGE_AVG,
+        POWER_SUPPLY_PROP_CHARGE_COUNTER,
         POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN,
         POWER_SUPPLY_PROP_ENERGY_EMPTY_DESIGN,
         POWER_SUPPLY_PROP_ENERGY_FULL,
diff --git a/include/linux/quotaops.h b/include/linux/quotaops.h
index 742187f7a05c..ca6b9b5c8d52 100644
--- a/include/linux/quotaops.h
+++ b/include/linux/quotaops.h
@@ -43,6 +43,8 @@ int dquot_mark_dquot_dirty(struct dquot *dquot);
 
 int vfs_quota_on(struct super_block *sb, int type, int format_id,
         char *path, int remount);
+int vfs_quota_on_path(struct super_block *sb, int type, int format_id,
+        struct path *path);
 int vfs_quota_on_mount(struct super_block *sb, char *qf_name,
         int format_id, int type);
 int vfs_quota_off(struct super_block *sb, int type, int remount);
diff --git a/include/linux/rculist.h b/include/linux/rculist.h
index b0f39be08b6c..eb4443c7e05b 100644
--- a/include/linux/rculist.h
+++ b/include/linux/rculist.h
@@ -98,6 +98,34 @@ static inline void list_del_rcu(struct list_head *entry)
 }
 
 /**
+ * hlist_del_init_rcu - deletes entry from hash list with re-initialization
+ * @n: the element to delete from the hash list.
+ *
+ * Note: list_unhashed() on the node return true after this. It is
+ * useful for RCU based read lockfree traversal if the writer side
+ * must know if the list entry is still hashed or already unhashed.
+ *
+ * In particular, it means that we can not poison the forward pointers
+ * that may still be used for walking the hash list and we can only
+ * zero the pprev pointer so list_unhashed() will return true after
+ * this.
+ *
+ * The caller must take whatever precautions are necessary (such as
+ * holding appropriate locks) to avoid racing with another
+ * list-mutation primitive, such as hlist_add_head_rcu() or
+ * hlist_del_rcu(), running on this same list.  However, it is
+ * perfectly legal to run concurrently with the _rcu list-traversal
+ * primitives, such as hlist_for_each_entry_rcu().
+ */
+static inline void hlist_del_init_rcu(struct hlist_node *n)
+{
+        if (!hlist_unhashed(n)) {
+                __hlist_del(n);
+                n->pprev = NULL;
+        }
+}
+
+/**
  * list_replace_rcu - replace old entry by new one
  * @old : the element to be replaced
  * @new : the new element to insert
diff --git a/include/linux/regulator/bq24022.h b/include/linux/regulator/bq24022.h
new file mode 100644
index 000000000000..e84b0a9feda5
--- /dev/null
+++ b/include/linux/regulator/bq24022.h
@@ -0,0 +1,21 @@
+/*
+ * Support for TI bq24022 (bqTINY-II) Dual Input (USB/AC Adpater)
+ * 1-Cell Li-Ion Charger connected via GPIOs.
+ *
+ * Copyright (c) 2008 Philipp Zabel
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+/**
+ * bq24022_mach_info - platform data for bq24022
+ * @gpio_nce: GPIO line connected to the nCE pin, used to enable / disable charging
+ * @gpio_iset2: GPIO line connected to the ISET2 pin, used to limit charging current to 100 mA / 500 mA
+ */
+struct bq24022_mach_info {
+        int gpio_nce;
+        int gpio_iset2;
+};
diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h
new file mode 100644
index 000000000000..afdc4558bb94
--- /dev/null
+++ b/include/linux/regulator/consumer.h
@@ -0,0 +1,284 @@
+/*
+ * consumer.h -- SoC Regulator consumer support.
+ *
+ * Copyright (C) 2007, 2008 Wolfson Microelectronics PLC.
+ *
+ * Author: Liam Girdwood <lg@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Regulator Consumer Interface.
+ *
+ * A Power Management Regulator framework for SoC based devices.
+ * Features:-
+ *   o Voltage and current level control.
+ *   o Operating mode control.
+ *   o Regulator status.
+ *   o sysfs entries for showing client devices and status
+ *
+ * EXPERIMENTAL FEATURES:
+ *   Dynamic Regulator operating Mode Switching (DRMS) - allows regulators
+ *   to use most efficient operating mode depending upon voltage and load and
+ *   is transparent to client drivers.
+ *
+ *   e.g. Devices x,y,z share regulator r. Device x and y draw 20mA each during
+ *   IO and 1mA at idle. Device z draws 100mA when under load and 5mA when
+ *   idling. Regulator r has > 90% efficiency in NORMAL mode at loads > 100mA
+ *   but this drops rapidly to 60% when below 100mA. Regulator r has > 90%
+ *   efficiency in IDLE mode at loads < 10mA. Thus regulator r will operate
+ *   in normal mode for loads > 10mA and in IDLE mode for load <= 10mA.
+ *
+ */
+
+#ifndef __LINUX_REGULATOR_CONSUMER_H_
+#define __LINUX_REGULATOR_CONSUMER_H_
+
+/*
+ * Regulator operating modes.
+ *
+ * Regulators can run in a variety of different operating modes depending on
+ * output load. This allows further system power savings by selecting the
+ * best (and most efficient) regulator mode for a desired load.
+ *
+ * Most drivers will only care about NORMAL. The modes below are generic and
+ * will probably not match the naming convention of your regulator data sheet
+ * but should match the use cases in the datasheet.
+ *
+ * In order of power efficiency (least efficient at top).
+ *
+ *  Mode       Description
+ *  FAST       Regulator can handle fast changes in it's load.
+ *             e.g. useful in CPU voltage & frequency scaling where
+ *             load can quickly increase with CPU frequency increases.
+ *
+ *  NORMAL     Normal regulator power supply mode. Most drivers will
+ *             use this mode.
+ *
+ *  IDLE       Regulator runs in a more efficient mode for light
+ *             loads. Can be used for devices that have a low power
+ *             requirement during periods of inactivity. This mode
+ *             may be more noisy than NORMAL and may not be able
+ *             to handle fast load switching.
+ *
+ *  STANDBY    Regulator runs in the most efficient mode for very
+ *             light loads. Can be used by devices when they are
+ *             in a sleep/standby state. This mode is likely to be
+ *             the most noisy and may not be able to handle fast load
+ *             switching.
+ *
+ * NOTE: Most regulators will only support a subset of these modes. Some
+ * will only just support NORMAL.
+ *
+ * These modes can be OR'ed together to make up a mask of valid register modes.
+ */
+
+#define REGULATOR_MODE_FAST                     0x1
+#define REGULATOR_MODE_NORMAL                   0x2
+#define REGULATOR_MODE_IDLE                     0x4
+#define REGULATOR_MODE_STANDBY                  0x8
+
+/*
+ * Regulator notifier events.
+ *
+ * UNDER_VOLTAGE  Regulator output is under voltage.
+ * OVER_CURRENT   Regulator output current is too high.
+ * REGULATION_OUT Regulator output is out of regulation.
+ * FAIL           Regulator output has failed.
+ * OVER_TEMP      Regulator over temp.
+ * FORCE_DISABLE  Regulator shut down by software.
+ *
+ * NOTE: These events can be OR'ed together when passed into handler.
+ */
+
+#define REGULATOR_EVENT_UNDER_VOLTAGE           0x01
+#define REGULATOR_EVENT_OVER_CURRENT            0x02
+#define REGULATOR_EVENT_REGULATION_OUT          0x04
+#define REGULATOR_EVENT_FAIL                    0x08
+#define REGULATOR_EVENT_OVER_TEMP               0x10
+#define REGULATOR_EVENT_FORCE_DISABLE           0x20
+
+struct regulator;
+
+/**
+ * struct regulator_bulk_data - Data used for bulk regulator operations.
+ *
+ * @supply   The name of the supply.  Initialised by the user before
+ *           using the bulk regulator APIs.
+ * @consumer The regulator consumer for the supply.  This will be managed
+ *           by the bulk API.
+ *
+ * The regulator APIs provide a series of regulator_bulk_() API calls as
+ * a convenience to consumers which require multiple supplies.  This
+ * structure is used to manage data for these calls.
+ */
+struct regulator_bulk_data {
+        const char *supply;
+        struct regulator *consumer;
+};
+
+#if defined(CONFIG_REGULATOR)
+
+/* regulator get and put */
+struct regulator *__must_check regulator_get(struct device *dev,
+                                             const char *id);
+void regulator_put(struct regulator *regulator);
+
+/* regulator output control and status */
+int regulator_enable(struct regulator *regulator);
+int regulator_disable(struct regulator *regulator);
+int regulator_force_disable(struct regulator *regulator);
+int regulator_is_enabled(struct regulator *regulator);
+
+int regulator_bulk_get(struct device *dev, int num_consumers,
+                       struct regulator_bulk_data *consumers);
+int regulator_bulk_enable(int num_consumers,
+                          struct regulator_bulk_data *consumers);
+int regulator_bulk_disable(int num_consumers,
+                           struct regulator_bulk_data *consumers);
+void regulator_bulk_free(int num_consumers,
+                         struct regulator_bulk_data *consumers);
+
+int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV);
+int regulator_get_voltage(struct regulator *regulator);
+int regulator_set_current_limit(struct regulator *regulator,
+                               int min_uA, int max_uA);
+int regulator_get_current_limit(struct regulator *regulator);
+
+int regulator_set_mode(struct regulator *regulator, unsigned int mode);
+unsigned int regulator_get_mode(struct regulator *regulator);
+int regulator_set_optimum_mode(struct regulator *regulator, int load_uA);
+
+/* regulator notifier block */
+int regulator_register_notifier(struct regulator *regulator,
+                              struct notifier_block *nb);
+int regulator_unregister_notifier(struct regulator *regulator,
+                                struct notifier_block *nb);
+
+/* driver data - core doesn't touch */
+void *regulator_get_drvdata(struct regulator *regulator);
+void regulator_set_drvdata(struct regulator *regulator, void *data);
+
+#else
+
+/*
+ * Make sure client drivers will still build on systems with no software
+ * controllable voltage or current regulators.
+ */
+static inline struct regulator *__must_check regulator_get(struct device *dev,
+        const char *id)
+{
+        /* Nothing except the stubbed out regulator API should be
+         * looking at the value except to check if it is an error
+         * value so the actual return value doesn't matter.
+         */
+        return (struct regulator *)id;
+}
+static inline void regulator_put(struct regulator *regulator)
+{
+}
+
+static inline int regulator_enable(struct regulator *regulator)
+{
+        return 0;
+}
+
+static inline int regulator_disable(struct regulator *regulator)
+{
+        return 0;
+}
+
+static inline int regulator_is_enabled(struct regulator *regulator)
+{
+        return 1;
+}
+
+static inline int regulator_bulk_get(struct device *dev,
+                                     int num_consumers,
+                                     struct regulator_bulk_data *consumers)
+{
+        return 0;
+}
+
+static inline int regulator_bulk_enable(int num_consumers,
+                                        struct regulator_bulk_data *consumers)
+{
+        return 0;
+}
+
+static inline int regulator_bulk_disable(int num_consumers,
+                                         struct regulator_bulk_data *consumers)
+{
+        return 0;
+}
+
+static inline void regulator_bulk_free(int num_consumers,
+                                       struct regulator_bulk_data *consumers)
+{
+}
+
+static inline int regulator_set_voltage(struct regulator *regulator,
+                                        int min_uV, int max_uV)
+{
+        return 0;
+}
+
+static inline int regulator_get_voltage(struct regulator *regulator)
+{
+        return 0;
+}
+
+static inline int regulator_set_current_limit(struct regulator *regulator,
+                                             int min_uA, int max_uA)
+{
+        return 0;
+}
+
+static inline int regulator_get_current_limit(struct regulator *regulator)
+{
+        return 0;
+}
+
+static inline int regulator_set_mode(struct regulator *regulator,
+        unsigned int mode)
+{
+        return 0;
+}
+
+static inline unsigned int regulator_get_mode(struct regulator *regulator)
+{
+        return REGULATOR_MODE_NORMAL;
+}
+
+static inline int regulator_set_optimum_mode(struct regulator *regulator,
+                                        int load_uA)
+{
+        return REGULATOR_MODE_NORMAL;
+}
+
+static inline int regulator_register_notifier(struct regulator *regulator,
+                              struct notifier_block *nb)
+{
+        return 0;
+}
+
+static inline int regulator_unregister_notifier(struct regulator *regulator,
+                                struct notifier_block *nb)
+{
+        return 0;
+}
+
+static inline void *regulator_get_drvdata(struct regulator *regulator)
+{
+        return NULL;
+}
+
+static inline void regulator_set_drvdata(struct regulator *regulator,
+        void *data)
+{
+}
+
+#endif
+
+#endif
diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
new file mode 100644
index 000000000000..1d712c7172a2
--- /dev/null
+++ b/include/linux/regulator/driver.h
@@ -0,0 +1,99 @@
+/*
+ * driver.h -- SoC Regulator driver support.
+ *
+ * Copyright (C) 2007, 2008 Wolfson Microelectronics PLC.
+ *
+ * Author: Liam Girdwood <lg@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Regulator Driver Interface.
+ */
+
+#ifndef __LINUX_REGULATOR_DRIVER_H_
+#define __LINUX_REGULATOR_DRIVER_H_
+
+#include <linux/device.h>
+#include <linux/regulator/consumer.h>
+
+struct regulator_constraints;
+struct regulator_dev;
+
+/**
+ * struct regulator_ops - regulator operations.
+ *
+ * This struct describes regulator operations.
+ */
+struct regulator_ops {
+
+        /* get/set regulator voltage */
+        int (*set_voltage) (struct regulator_dev *, int min_uV, int max_uV);
+        int (*get_voltage) (struct regulator_dev *);
+
+        /* get/set regulator current  */
+        int (*set_current_limit) (struct regulator_dev *,
+                                 int min_uA, int max_uA);
+        int (*get_current_limit) (struct regulator_dev *);
+
+        /* enable/disable regulator */
+        int (*enable) (struct regulator_dev *);
+        int (*disable) (struct regulator_dev *);
+        int (*is_enabled) (struct regulator_dev *);
+
+        /* get/set regulator operating mode (defined in regulator.h) */
+        int (*set_mode) (struct regulator_dev *, unsigned int mode);
+        unsigned int (*get_mode) (struct regulator_dev *);
+
+        /* get most efficient regulator operating mode for load */
+        unsigned int (*get_optimum_mode) (struct regulator_dev *, int input_uV,
+                                          int output_uV, int load_uA);
+
+        /* the operations below are for configuration of regulator state when
+         * it's parent PMIC enters a global STANBY/HIBERNATE state */
+
+        /* set regulator suspend voltage */
+        int (*set_suspend_voltage) (struct regulator_dev *, int uV);
+
+        /* enable/disable regulator in suspend state */
+        int (*set_suspend_enable) (struct regulator_dev *);
+        int (*set_suspend_disable) (struct regulator_dev *);
+
+        /* set regulator suspend operating mode (defined in regulator.h) */
+        int (*set_suspend_mode) (struct regulator_dev *, unsigned int mode);
+};
+
+/*
+ * Regulators can either control voltage or current.
+ */
+enum regulator_type {
+        REGULATOR_VOLTAGE,
+        REGULATOR_CURRENT,
+};
+
+/**
+ * struct regulator_desc - Regulator descriptor
+ *
+ */
+struct regulator_desc {
+        const char *name;
+        int id;
+        struct regulator_ops *ops;
+        int irq;
+        enum regulator_type type;
+        struct module *owner;
+};
+
+
+struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc,
+                                          void *reg_data);
+void regulator_unregister(struct regulator_dev *rdev);
+
+int regulator_notifier_call_chain(struct regulator_dev *rdev,
+                                  unsigned long event, void *data);
+
+void *rdev_get_drvdata(struct regulator_dev *rdev);
+int rdev_get_id(struct regulator_dev *rdev);
+
+#endif
diff --git a/include/linux/regulator/fixed.h b/include/linux/regulator/fixed.h
new file mode 100644
index 000000000000..1387a5d2190e
--- /dev/null
+++ b/include/linux/regulator/fixed.h
@@ -0,0 +1,22 @@
+/*
+ * fixed.h
+ *
+ * Copyright 2008 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ */
+
+#ifndef __REGULATOR_FIXED_H
+#define __REGULATOR_FIXED_H
+
+struct fixed_voltage_config {
+        const char *supply_name;
+        int microvolts;
+};
+
+#endif
diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h
new file mode 100644
index 000000000000..11e737dbfcf2
--- /dev/null
+++ b/include/linux/regulator/machine.h
@@ -0,0 +1,104 @@
+/*
+ * machine.h -- SoC Regulator support, machine/board driver API.
+ *
+ * Copyright (C) 2007, 2008 Wolfson Microelectronics PLC.
+ *
+ * Author: Liam Girdwood <lg@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Regulator Machine/Board Interface.
+ */
+
+#ifndef __LINUX_REGULATOR_MACHINE_H_
+#define __LINUX_REGULATOR_MACHINE_H_
+
+#include <linux/regulator/consumer.h>
+#include <linux/suspend.h>
+
+struct regulator;
+
+/*
+ * Regulator operation constraint flags. These flags are used to enable
+ * certain regulator operations and can be OR'ed together.
+ *
+ * VOLTAGE:  Regulator output voltage can be changed by software on this
+ *           board/machine.
+ * CURRENT:  Regulator output current can be changed by software on this
+ *           board/machine.
+ * MODE:     Regulator operating mode can be changed by software on this
+ *           board/machine.
+ * STATUS:   Regulator can be enabled and disabled.
+ * DRMS:     Dynamic Regulator Mode Switching is enabled for this regulator.
+ */
+
+#define REGULATOR_CHANGE_VOLTAGE        0x1
+#define REGULATOR_CHANGE_CURRENT        0x2
+#define REGULATOR_CHANGE_MODE           0x4
+#define REGULATOR_CHANGE_STATUS         0x8
+#define REGULATOR_CHANGE_DRMS           0x10
+
+/**
+ * struct regulator_state - regulator state during low power syatem states
+ *
+ * This describes a regulators state during a system wide low power state.
+ */
+struct regulator_state {
+        int uV; /* suspend voltage */
+        unsigned int mode; /* suspend regulator operating mode */
+        int enabled; /* is regulator enabled in this suspend state */
+};
+
+/**
+ * struct regulation_constraints - regulator operating constraints.
+ *
+ * This struct describes regulator and board/machine specific constraints.
+ */
+struct regulation_constraints {
+
+        char *name;
+
+        /* voltage output range (inclusive) - for voltage control */
+        int min_uV;
+        int max_uV;
+
+        /* current output range (inclusive) - for current control */
+        int min_uA;
+        int max_uA;
+
+        /* valid regulator operating modes for this machine */
+        unsigned int valid_modes_mask;
+
+        /* valid operations for regulator on this machine */
+        unsigned int valid_ops_mask;
+
+        /* regulator input voltage - only if supply is another regulator */
+        int input_uV;
+
+        /* regulator suspend states for global PMIC STANDBY/HIBERNATE */
+        struct regulator_state state_disk;
+        struct regulator_state state_mem;
+        struct regulator_state state_standby;
+        suspend_state_t initial_state; /* suspend state to set at init */
+
+        /* constriant flags */
+        unsigned always_on:1;   /* regulator never off when system is on */
+        unsigned boot_on:1;     /* bootloader/firmware enabled regulator */
+        unsigned apply_uV:1;    /* apply uV constraint iff min == max */
+};
+
+int regulator_set_supply(const char *regulator, const char *regulator_supply);
+
+const char *regulator_get_supply(const char *regulator);
+
+int regulator_set_machine_constraints(const char *regulator,
+        struct regulation_constraints *constraints);
+
+int regulator_set_device_supply(const char *regulator, struct device *dev,
+                                const char *supply);
+
+int regulator_suspend_prepare(suspend_state_t state);
+
+#endif
diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h
index c5f6e54ec6ae..741d1a62cc3f 100644
--- a/include/linux/rfkill.h
+++ b/include/linux/rfkill.h
@@ -68,7 +68,8 @@ enum rfkill_state {
  * @user_claim_unsupported: Whether the hardware supports exclusive
  *      RF-kill control by userspace. Set this before registering.
  * @user_claim: Set when the switch is controlled exlusively by userspace.
- * @mutex: Guards switch state transitions
+ * @mutex: Guards switch state transitions.  It serializes callbacks
+ *      and also protects the state.
  * @data: Pointer to the RF button drivers private data which will be
  *      passed along when toggling radio state.
  * @toggle_radio(): Mandatory handler to control state of the radio.
@@ -89,12 +90,13 @@ struct rfkill {
         const char *name;
         enum rfkill_type type;
 
-        enum rfkill_state state;
         bool user_claim_unsupported;
         bool user_claim;
 
+        /* the mutex serializes callbacks and also protects
+         * the state */
         struct mutex mutex;
-
+        enum rfkill_state state;
         void *data;
         int (*toggle_radio)(void *data, enum rfkill_state state);
         int (*get_state)(void *data, enum rfkill_state *state);
diff --git a/include/linux/rmap.h b/include/linux/rmap.h
index 1383692ac5bd..69407f85e10b 100644
--- a/include/linux/rmap.h
+++ b/include/linux/rmap.h
@@ -26,6 +26,14 @@
  */
 struct anon_vma {
         spinlock_t lock;        /* Serialize access to vma list */
+        /*
+         * NOTE: the LSB of the head.next is set by
+         * mm_take_all_locks() _after_ taking the above lock. So the
+         * head must only be read/written after taking the above lock
+         * to be sure to see a valid next pointer. The LSB bit itself
+         * is serialized by a system wide lock only visible to
+         * mm_take_all_locks() (mm_all_locks_mutex).
+         */
         struct list_head head;  /* List of private "related" vmas */
 };
 
diff --git a/include/linux/serio.h b/include/linux/serio.h
index e72716cca577..25641d9e0ea8 100644
--- a/include/linux/serio.h
+++ b/include/linux/serio.h
@@ -87,11 +87,10 @@ void serio_unregister_port(struct serio *serio);
 void serio_unregister_child_port(struct serio *serio);
 
 int __serio_register_driver(struct serio_driver *drv, struct module *owner, const char *mod_name);
-static inline int serio_register_driver(struct serio_driver *drv)
+static inline int __must_check serio_register_driver(struct serio_driver *drv)
 {
         return __serio_register_driver(drv, THIS_MODULE, KBUILD_MODNAME);
 }
-int serio_register_driver(struct serio_driver *drv);
 void serio_unregister_driver(struct serio_driver *drv);
 
 static inline int serio_write(struct serio *serio, unsigned char data)
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index 7ea44f6621f2..cfcc45b3bef0 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -243,6 +243,7 @@ typedef unsigned char *sk_buff_data_t;
  *      @tc_index: Traffic control index
  *      @tc_verd: traffic control verdict
  *      @ndisc_nodetype: router type (from link layer)
+ *      @do_not_encrypt: set to prevent encryption of this frame
  *      @dma_cookie: a cookie to one of several possible DMA operations
  *              done by skb DMA functions
  *      @secmark: security marking
@@ -316,7 +317,10 @@ struct sk_buff {
 #ifdef CONFIG_IPV6_NDISC_NODETYPE
         __u8                    ndisc_nodetype:2;
 #endif
-        /* 14 bit hole */
+#if defined(CONFIG_MAC80211) || defined(CONFIG_MAC80211_MODULE)
+        __u8                    do_not_encrypt:1;
+#endif
+        /* 0/13/14 bit hole */
 
 #ifdef CONFIG_NET_DMA
         dma_cookie_t            dma_cookie;
diff --git a/include/linux/snmp.h b/include/linux/snmp.h
index 5df62ef1280c..7a6e6bba4a71 100644
--- a/include/linux/snmp.h
+++ b/include/linux/snmp.h
@@ -214,6 +214,8 @@ enum
         LINUX_MIB_TCPDSACKIGNOREDOLD,           /* TCPSACKIgnoredOld */
         LINUX_MIB_TCPDSACKIGNOREDNOUNDO,        /* TCPSACKIgnoredNoUndo */
         LINUX_MIB_TCPSPURIOUSRTOS,              /* TCPSpuriousRTOs */
+        LINUX_MIB_TCPMD5NOTFOUND,               /* TCPMD5NotFound */
+        LINUX_MIB_TCPMD5UNEXPECTED,             /* TCPMD5Unexpected */
         __LINUX_MIB_MAX
 };
 
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index a9cc29d46653..4be01bb44377 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -778,8 +778,20 @@ spi_register_board_info(struct spi_board_info const *info, unsigned n)
  * use spi_new_device() to describe each device.  You can also call
  * spi_unregister_device() to start making that device vanish, but
  * normally that would be handled by spi_unregister_master().
+ *
+ * You can also use spi_alloc_device() and spi_add_device() to use a two
+ * stage registration sequence for each spi_device.  This gives the caller
+ * some more control over the spi_device structure before it is registered,
+ * but requires that caller to initialize fields that would otherwise
+ * be defined using the board info.
  */
 extern struct spi_device *
+spi_alloc_device(struct spi_master *master);
+
+extern int
+spi_add_device(struct spi_device *spi);
+
+extern struct spi_device *
 spi_new_device(struct spi_master *, struct spi_board_info *);
 
 static inline void
diff --git a/include/linux/stop_machine.h b/include/linux/stop_machine.h
index 5bfc553bdb21..f1cb0ba6d715 100644
--- a/include/linux/stop_machine.h
+++ b/include/linux/stop_machine.h
@@ -5,41 +5,43 @@
    (and more).  So the "read" side to such a lock is anything which
    diables preeempt. */
 #include <linux/cpu.h>
+#include <linux/cpumask.h>
 #include <asm/system.h>
 
 #if defined(CONFIG_STOP_MACHINE) && defined(CONFIG_SMP)
+
+/* Deprecated, but useful for transition. */
+#define ALL_CPUS ~0U
+
 /**
- * stop_machine_run: freeze the machine on all CPUs and run this function
+ * stop_machine: freeze the machine on all CPUs and run this function
  * @fn: the function to run
  * @data: the data ptr for the @fn()
- * @cpu: the cpu to run @fn() on (or any, if @cpu == NR_CPUS.
+ * @cpus: the cpus to run the @fn() on (NULL = any online cpu)
  *
- * Description: This causes a thread to be scheduled on every other cpu,
- * each of which disables interrupts, and finally interrupts are disabled
- * on the current CPU.  The result is that noone is holding a spinlock
- * or inside any other preempt-disabled region when @fn() runs.
+ * Description: This causes a thread to be scheduled on every cpu,
+ * each of which disables interrupts.  The result is that noone is
+ * holding a spinlock or inside any other preempt-disabled region when
+ * @fn() runs.
  *
  * This can be thought of as a very heavy write lock, equivalent to
  * grabbing every spinlock in the kernel. */
-int stop_machine_run(int (*fn)(void *), void *data, unsigned int cpu);
+int stop_machine(int (*fn)(void *), void *data, const cpumask_t *cpus);
 
 /**
- * __stop_machine_run: freeze the machine on all CPUs and run this function
+ * __stop_machine: freeze the machine on all CPUs and run this function
  * @fn: the function to run
  * @data: the data ptr for the @fn
- * @cpu: the cpu to run @fn on (or any, if @cpu == NR_CPUS.
+ * @cpus: the cpus to run the @fn() on (NULL = any online cpu)
  *
- * Description: This is a special version of the above, which returns the
- * thread which has run @fn(): kthread_stop will return the return value
- * of @fn().  Used by hotplug cpu.
+ * Description: This is a special version of the above, which assumes cpus
+ * won't come or go while it's being called.  Used by hotplug cpu.
  */
-struct task_struct *__stop_machine_run(int (*fn)(void *), void *data,
-                                       unsigned int cpu);
-
+int __stop_machine(int (*fn)(void *), void *data, const cpumask_t *cpus);
 #else
 
-static inline int stop_machine_run(int (*fn)(void *), void *data,
-                                   unsigned int cpu)
+static inline int stop_machine(int (*fn)(void *), void *data,
+                               const cpumask_t *cpus)
 {
         int ret;
         local_irq_disable();
@@ -48,4 +50,18 @@ static inline int stop_machine_run(int (*fn)(void *), void *data,
         return ret;
 }
 #endif /* CONFIG_SMP */
+
+static inline int __deprecated stop_machine_run(int (*fn)(void *), void *data,
+                                                unsigned int cpu)
+{
+        /* If they don't care which cpu fn runs on, just pick one. */
+        if (cpu == NR_CPUS)
+                return stop_machine(fn, data, NULL);
+        else if (cpu == ~0U)
+                return stop_machine(fn, data, &cpu_possible_map);
+        else {
+                cpumask_t cpus = cpumask_of_cpu(cpu);
+                return stop_machine(fn, data, &cpus);
+        }
+}
 #endif /* _LINUX_STOP_MACHINE */
diff --git a/include/linux/videodev.h b/include/linux/videodev.h
index 9385a566aed8..15a653d41132 100644
--- a/include/linux/videodev.h
+++ b/include/linux/videodev.h
@@ -17,6 +17,21 @@
 
 #if defined(CONFIG_VIDEO_V4L1_COMPAT) || !defined (__KERNEL__)
 
+#define VID_TYPE_CAPTURE        1       /* Can capture */
+#define VID_TYPE_TUNER          2       /* Can tune */
+#define VID_TYPE_TELETEXT       4       /* Does teletext */
+#define VID_TYPE_OVERLAY        8       /* Overlay onto frame buffer */
+#define VID_TYPE_CHROMAKEY      16      /* Overlay by chromakey */
+#define VID_TYPE_CLIPPING       32      /* Can clip */
+#define VID_TYPE_FRAMERAM       64      /* Uses the frame buffer memory */
+#define VID_TYPE_SCALES         128     /* Scalable */
+#define VID_TYPE_MONOCHROME     256     /* Monochrome only */
+#define VID_TYPE_SUBCAPTURE     512     /* Can capture subareas of the image */
+#define VID_TYPE_MPEG_DECODER   1024    /* Can decode MPEG streams */
+#define VID_TYPE_MPEG_ENCODER   2048    /* Can encode MPEG streams */
+#define VID_TYPE_MJPEG_DECODER  4096    /* Can decode MJPEG streams */
+#define VID_TYPE_MJPEG_ENCODER  8192    /* Can encode MJPEG streams */
+
 struct video_capability
 {
         char name[32];
diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h
index 2e66a95e8d32..e466bd54a50e 100644
--- a/include/linux/videodev2.h
+++ b/include/linux/videodev2.h
@@ -71,6 +71,11 @@
  */
 #define VIDEO_MAX_FRAME               32
 
+#ifndef __KERNEL__
+
+/* These defines are V4L1 specific and should not be used with the V4L2 API!
+   They will be removed from this header in the future. */
+
 #define VID_TYPE_CAPTURE        1       /* Can capture */
 #define VID_TYPE_TUNER          2       /* Can tune */
 #define VID_TYPE_TELETEXT       4       /* Does teletext */
@@ -85,14 +90,15 @@
 #define VID_TYPE_MPEG_ENCODER   2048    /* Can encode MPEG streams */
 #define VID_TYPE_MJPEG_DECODER  4096    /* Can decode MJPEG streams */
 #define VID_TYPE_MJPEG_ENCODER  8192    /* Can encode MJPEG streams */
+#endif
 
 /*
  *      M I S C E L L A N E O U S
  */
 
 /*  Four-character-code (FOURCC) */
-#define v4l2_fourcc(a,b,c,d)\
-        (((__u32)(a)<<0)|((__u32)(b)<<8)|((__u32)(c)<<16)|((__u32)(d)<<24))
+#define v4l2_fourcc(a, b, c, d)\
+        ((__u32)(a) | ((__u32)(b) << 8) | ((__u32)(c) << 16) | ((__u32)(d) << 24))
 
 /*
  *      E N U M S
@@ -226,8 +232,7 @@ struct v4l2_fract {
 /*
  *      D R I V E R   C A P A B I L I T I E S
  */
-struct v4l2_capability
-{
+struct v4l2_capability {
         __u8    driver[16];     /* i.e. "bttv" */
         __u8    card[32];       /* i.e. "Hauppauge WinTV" */
         __u8    bus_info[32];   /* "PCI:" + pci_name(pci_dev) */
@@ -259,8 +264,7 @@ struct v4l2_capability
 /*
  *      V I D E O   I M A G E   F O R M A T
  */
-struct v4l2_pix_format
-{
+struct v4l2_pix_format {
         __u32                   width;
         __u32                   height;
         __u32                   pixelformat;
@@ -272,68 +276,69 @@ struct v4l2_pix_format
 };
 
 /*      Pixel format         FOURCC                        depth  Description  */
-#define V4L2_PIX_FMT_RGB332  v4l2_fourcc('R','G','B','1') /*  8  RGB-3-3-2     */
-#define V4L2_PIX_FMT_RGB444  v4l2_fourcc('R','4','4','4') /* 16  xxxxrrrr ggggbbbb */
-#define V4L2_PIX_FMT_RGB555  v4l2_fourcc('R','G','B','O') /* 16  RGB-5-5-5     */
-#define V4L2_PIX_FMT_RGB565  v4l2_fourcc('R','G','B','P') /* 16  RGB-5-6-5     */
-#define V4L2_PIX_FMT_RGB555X v4l2_fourcc('R','G','B','Q') /* 16  RGB-5-5-5 BE  */
-#define V4L2_PIX_FMT_RGB565X v4l2_fourcc('R','G','B','R') /* 16  RGB-5-6-5 BE  */
-#define V4L2_PIX_FMT_BGR24   v4l2_fourcc('B','G','R','3') /* 24  BGR-8-8-8     */
-#define V4L2_PIX_FMT_RGB24   v4l2_fourcc('R','G','B','3') /* 24  RGB-8-8-8     */
-#define V4L2_PIX_FMT_BGR32   v4l2_fourcc('B','G','R','4') /* 32  BGR-8-8-8-8   */
-#define V4L2_PIX_FMT_RGB32   v4l2_fourcc('R','G','B','4') /* 32  RGB-8-8-8-8   */
-#define V4L2_PIX_FMT_GREY    v4l2_fourcc('G','R','E','Y') /*  8  Greyscale     */
-#define V4L2_PIX_FMT_Y16     v4l2_fourcc('Y','1','6',' ') /* 16  Greyscale     */
-#define V4L2_PIX_FMT_PAL8    v4l2_fourcc('P','A','L','8') /*  8  8-bit palette */
-#define V4L2_PIX_FMT_YVU410  v4l2_fourcc('Y','V','U','9') /*  9  YVU 4:1:0     */
-#define V4L2_PIX_FMT_YVU420  v4l2_fourcc('Y','V','1','2') /* 12  YVU 4:2:0     */
-#define V4L2_PIX_FMT_YUYV    v4l2_fourcc('Y','U','Y','V') /* 16  YUV 4:2:2     */
-#define V4L2_PIX_FMT_UYVY    v4l2_fourcc('U','Y','V','Y') /* 16  YUV 4:2:2     */
-#define V4L2_PIX_FMT_YUV422P v4l2_fourcc('4','2','2','P') /* 16  YVU422 planar */
-#define V4L2_PIX_FMT_YUV411P v4l2_fourcc('4','1','1','P') /* 16  YVU411 planar */
-#define V4L2_PIX_FMT_Y41P    v4l2_fourcc('Y','4','1','P') /* 12  YUV 4:1:1     */
-#define V4L2_PIX_FMT_YUV444  v4l2_fourcc('Y','4','4','4') /* 16  xxxxyyyy uuuuvvvv */
-#define V4L2_PIX_FMT_YUV555  v4l2_fourcc('Y','U','V','O') /* 16  YUV-5-5-5     */
-#define V4L2_PIX_FMT_YUV565  v4l2_fourcc('Y','U','V','P') /* 16  YUV-5-6-5     */
-#define V4L2_PIX_FMT_YUV32   v4l2_fourcc('Y','U','V','4') /* 32  YUV-8-8-8-8   */
+#define V4L2_PIX_FMT_RGB332  v4l2_fourcc('R', 'G', 'B', '1') /*  8  RGB-3-3-2     */
+#define V4L2_PIX_FMT_RGB444  v4l2_fourcc('R', '4', '4', '4') /* 16  xxxxrrrr ggggbbbb */
+#define V4L2_PIX_FMT_RGB555  v4l2_fourcc('R', 'G', 'B', 'O') /* 16  RGB-5-5-5     */
+#define V4L2_PIX_FMT_RGB565  v4l2_fourcc('R', 'G', 'B', 'P') /* 16  RGB-5-6-5     */
+#define V4L2_PIX_FMT_RGB555X v4l2_fourcc('R', 'G', 'B', 'Q') /* 16  RGB-5-5-5 BE  */
+#define V4L2_PIX_FMT_RGB565X v4l2_fourcc('R', 'G', 'B', 'R') /* 16  RGB-5-6-5 BE  */
+#define V4L2_PIX_FMT_BGR24   v4l2_fourcc('B', 'G', 'R', '3') /* 24  BGR-8-8-8     */
+#define V4L2_PIX_FMT_RGB24   v4l2_fourcc('R', 'G', 'B', '3') /* 24  RGB-8-8-8     */
+#define V4L2_PIX_FMT_BGR32   v4l2_fourcc('B', 'G', 'R', '4') /* 32  BGR-8-8-8-8   */
+#define V4L2_PIX_FMT_RGB32   v4l2_fourcc('R', 'G', 'B', '4') /* 32  RGB-8-8-8-8   */
+#define V4L2_PIX_FMT_GREY    v4l2_fourcc('G', 'R', 'E', 'Y') /*  8  Greyscale     */
+#define V4L2_PIX_FMT_Y16     v4l2_fourcc('Y', '1', '6', ' ') /* 16  Greyscale     */
+#define V4L2_PIX_FMT_PAL8    v4l2_fourcc('P', 'A', 'L', '8') /*  8  8-bit palette */
+#define V4L2_PIX_FMT_YVU410  v4l2_fourcc('Y', 'V', 'U', '9') /*  9  YVU 4:1:0     */
+#define V4L2_PIX_FMT_YVU420  v4l2_fourcc('Y', 'V', '1', '2') /* 12  YVU 4:2:0     */
+#define V4L2_PIX_FMT_YUYV    v4l2_fourcc('Y', 'U', 'Y', 'V') /* 16  YUV 4:2:2     */
+#define V4L2_PIX_FMT_UYVY    v4l2_fourcc('U', 'Y', 'V', 'Y') /* 16  YUV 4:2:2     */
+#define V4L2_PIX_FMT_YUV422P v4l2_fourcc('4', '2', '2', 'P') /* 16  YVU422 planar */
+#define V4L2_PIX_FMT_YUV411P v4l2_fourcc('4', '1', '1', 'P') /* 16  YVU411 planar */
+#define V4L2_PIX_FMT_Y41P    v4l2_fourcc('Y', '4', '1', 'P') /* 12  YUV 4:1:1     */
+#define V4L2_PIX_FMT_YUV444  v4l2_fourcc('Y', '4', '4', '4') /* 16  xxxxyyyy uuuuvvvv */
+#define V4L2_PIX_FMT_YUV555  v4l2_fourcc('Y', 'U', 'V', 'O') /* 16  YUV-5-5-5     */
+#define V4L2_PIX_FMT_YUV565  v4l2_fourcc('Y', 'U', 'V', 'P') /* 16  YUV-5-6-5     */
+#define V4L2_PIX_FMT_YUV32   v4l2_fourcc('Y', 'U', 'V', '4') /* 32  YUV-8-8-8-8   */
 
 /* two planes -- one Y, one Cr + Cb interleaved  */
-#define V4L2_PIX_FMT_NV12    v4l2_fourcc('N','V','1','2') /* 12  Y/CbCr 4:2:0  */
-#define V4L2_PIX_FMT_NV21    v4l2_fourcc('N','V','2','1') /* 12  Y/CrCb 4:2:0  */
+#define V4L2_PIX_FMT_NV12    v4l2_fourcc('N', 'V', '1', '2') /* 12  Y/CbCr 4:2:0  */
+#define V4L2_PIX_FMT_NV21    v4l2_fourcc('N', 'V', '2', '1') /* 12  Y/CrCb 4:2:0  */
 
 /*  The following formats are not defined in the V4L2 specification */
-#define V4L2_PIX_FMT_YUV410  v4l2_fourcc('Y','U','V','9') /*  9  YUV 4:1:0     */
-#define V4L2_PIX_FMT_YUV420  v4l2_fourcc('Y','U','1','2') /* 12  YUV 4:2:0     */
-#define V4L2_PIX_FMT_YYUV    v4l2_fourcc('Y','Y','U','V') /* 16  YUV 4:2:2     */
-#define V4L2_PIX_FMT_HI240   v4l2_fourcc('H','I','2','4') /*  8  8-bit color   */
-#define V4L2_PIX_FMT_HM12    v4l2_fourcc('H','M','1','2') /*  8  YUV 4:2:0 16x16 macroblocks */
+#define V4L2_PIX_FMT_YUV410  v4l2_fourcc('Y', 'U', 'V', '9') /*  9  YUV 4:1:0     */
+#define V4L2_PIX_FMT_YUV420  v4l2_fourcc('Y', 'U', '1', '2') /* 12  YUV 4:2:0     */
+#define V4L2_PIX_FMT_YYUV    v4l2_fourcc('Y', 'Y', 'U', 'V') /* 16  YUV 4:2:2     */
+#define V4L2_PIX_FMT_HI240   v4l2_fourcc('H', 'I', '2', '4') /*  8  8-bit color   */
+#define V4L2_PIX_FMT_HM12    v4l2_fourcc('H', 'M', '1', '2') /*  8  YUV 4:2:0 16x16 macroblocks */
 
 /* see http://www.siliconimaging.com/RGB%20Bayer.htm */
-#define V4L2_PIX_FMT_SBGGR8  v4l2_fourcc('B','A','8','1') /*  8  BGBG.. GRGR.. */
-#define V4L2_PIX_FMT_SGBRG8  v4l2_fourcc('G','B','R','G') /*  8  GBGB.. RGRG.. */
-#define V4L2_PIX_FMT_SBGGR16 v4l2_fourcc('B','Y','R','2') /* 16  BGBG.. GRGR.. */
+#define V4L2_PIX_FMT_SBGGR8  v4l2_fourcc('B', 'A', '8', '1') /*  8  BGBG.. GRGR.. */
+#define V4L2_PIX_FMT_SGBRG8  v4l2_fourcc('G', 'B', 'R', 'G') /*  8  GBGB.. RGRG.. */
+#define V4L2_PIX_FMT_SBGGR16 v4l2_fourcc('B', 'Y', 'R', '2') /* 16  BGBG.. GRGR.. */
 
 /* compressed formats */
-#define V4L2_PIX_FMT_MJPEG    v4l2_fourcc('M','J','P','G') /* Motion-JPEG   */
-#define V4L2_PIX_FMT_JPEG     v4l2_fourcc('J','P','E','G') /* JFIF JPEG     */
-#define V4L2_PIX_FMT_DV       v4l2_fourcc('d','v','s','d') /* 1394          */
-#define V4L2_PIX_FMT_MPEG     v4l2_fourcc('M','P','E','G') /* MPEG-1/2/4    */
+#define V4L2_PIX_FMT_MJPEG    v4l2_fourcc('M', 'J', 'P', 'G') /* Motion-JPEG   */
+#define V4L2_PIX_FMT_JPEG     v4l2_fourcc('J', 'P', 'E', 'G') /* JFIF JPEG     */
+#define V4L2_PIX_FMT_DV       v4l2_fourcc('d', 'v', 's', 'd') /* 1394          */
+#define V4L2_PIX_FMT_MPEG     v4l2_fourcc('M', 'P', 'E', 'G') /* MPEG-1/2/4    */
 
 /*  Vendor-specific formats   */
-#define V4L2_PIX_FMT_WNVA     v4l2_fourcc('W','N','V','A') /* Winnov hw compress */
-#define V4L2_PIX_FMT_SN9C10X  v4l2_fourcc('S','9','1','0') /* SN9C10x compression */
-#define V4L2_PIX_FMT_PWC1     v4l2_fourcc('P','W','C','1') /* pwc older webcam */
-#define V4L2_PIX_FMT_PWC2     v4l2_fourcc('P','W','C','2') /* pwc newer webcam */
-#define V4L2_PIX_FMT_ET61X251 v4l2_fourcc('E','6','2','5') /* ET61X251 compression */
-#define V4L2_PIX_FMT_SPCA501  v4l2_fourcc('S','5','0','1') /* YUYV per line */
-#define V4L2_PIX_FMT_SPCA561  v4l2_fourcc('S','5','6','1') /* compressed GBRG bayer */
-#define V4L2_PIX_FMT_PAC207   v4l2_fourcc('P','2','0','7') /* compressed BGGR bayer */
+#define V4L2_PIX_FMT_WNVA     v4l2_fourcc('W', 'N', 'V', 'A') /* Winnov hw compress */
+#define V4L2_PIX_FMT_SN9C10X  v4l2_fourcc('S', '9', '1', '0') /* SN9C10x compression */
+#define V4L2_PIX_FMT_PWC1     v4l2_fourcc('P', 'W', 'C', '1') /* pwc older webcam */
+#define V4L2_PIX_FMT_PWC2     v4l2_fourcc('P', 'W', 'C', '2') /* pwc newer webcam */
+#define V4L2_PIX_FMT_ET61X251 v4l2_fourcc('E', '6', '2', '5') /* ET61X251 compression */
+#define V4L2_PIX_FMT_SPCA501  v4l2_fourcc('S', '5', '0', '1') /* YUYV per line */
+#define V4L2_PIX_FMT_SPCA505  v4l2_fourcc('S', '5', '0', '5') /* YYUV per line */
+#define V4L2_PIX_FMT_SPCA508  v4l2_fourcc('S', '5', '0', '8') /* YUVY per line */
+#define V4L2_PIX_FMT_SPCA561  v4l2_fourcc('S', '5', '6', '1') /* compressed GBRG bayer */
+#define V4L2_PIX_FMT_PAC207   v4l2_fourcc('P', '2', '0', '7') /* compressed BGGR bayer */
 
 /*
  *      F O R M A T   E N U M E R A T I O N
  */
-struct v4l2_fmtdesc
-{
+struct v4l2_fmtdesc {
         __u32               index;             /* Format number      */
         enum v4l2_buf_type  type;              /* buffer type        */
         __u32               flags;
@@ -349,21 +354,18 @@ struct v4l2_fmtdesc
 /*
  *      F R A M E   S I Z E   E N U M E R A T I O N
  */
-enum v4l2_frmsizetypes
-{
+enum v4l2_frmsizetypes {
         V4L2_FRMSIZE_TYPE_DISCRETE      = 1,
         V4L2_FRMSIZE_TYPE_CONTINUOUS    = 2,
         V4L2_FRMSIZE_TYPE_STEPWISE      = 3,
 };
 
-struct v4l2_frmsize_discrete
-{
+struct v4l2_frmsize_discrete {
         __u32                   width;          /* Frame width [pixel] */
         __u32                   height;         /* Frame height [pixel] */
 };
 
-struct v4l2_frmsize_stepwise
-{
+struct v4l2_frmsize_stepwise {
         __u32                   min_width;      /* Minimum frame width [pixel] */
         __u32                   max_width;      /* Maximum frame width [pixel] */
         __u32                   step_width;     /* Frame width step size [pixel] */
@@ -372,8 +374,7 @@ struct v4l2_frmsize_stepwise
         __u32                   step_height;    /* Frame height step size [pixel] */
 };
 
-struct v4l2_frmsizeenum
-{
+struct v4l2_frmsizeenum {
         __u32                   index;          /* Frame size number */
         __u32                   pixel_format;   /* Pixel format */
         __u32                   type;           /* Frame size type the device supports. */
@@ -389,22 +390,19 @@ struct v4l2_frmsizeenum
 /*
  *      F R A M E   R A T E   E N U M E R A T I O N
  */
-enum v4l2_frmivaltypes
-{
+enum v4l2_frmivaltypes {
         V4L2_FRMIVAL_TYPE_DISCRETE      = 1,
         V4L2_FRMIVAL_TYPE_CONTINUOUS    = 2,
         V4L2_FRMIVAL_TYPE_STEPWISE      = 3,
 };
 
-struct v4l2_frmival_stepwise
-{
+struct v4l2_frmival_stepwise {
         struct v4l2_fract       min;            /* Minimum frame interval [s] */
         struct v4l2_fract       max;            /* Maximum frame interval [s] */
         struct v4l2_fract       step;           /* Frame interval step size [s] */
 };
 
-struct v4l2_frmivalenum
-{
+struct v4l2_frmivalenum {
         __u32                   index;          /* Frame format index */
         __u32                   pixel_format;   /* Pixel format */
         __u32                   width;          /* Frame width */
@@ -423,8 +421,7 @@ struct v4l2_frmivalenum
 /*
  *      T I M E C O D E
  */
-struct v4l2_timecode
-{
+struct v4l2_timecode {
         __u32   type;
         __u32   flags;
         __u8    frames;
@@ -449,8 +446,7 @@ struct v4l2_timecode
 #define V4L2_TC_USERBITS_8BITCHARS      0x0008
 /* The above is based on SMPTE timecodes */
 
-struct v4l2_jpegcompression
-{
+struct v4l2_jpegcompression {
         int quality;
 
         int  APPn;              /* Number of APP segment to be written,
@@ -482,16 +478,14 @@ struct v4l2_jpegcompression
 /*
  *      M E M O R Y - M A P P I N G   B U F F E R S
  */
-struct v4l2_requestbuffers
-{
+struct v4l2_requestbuffers {
         __u32                   count;
         enum v4l2_buf_type      type;
         enum v4l2_memory        memory;
         __u32                   reserved[2];
 };
 
-struct v4l2_buffer
-{
+struct v4l2_buffer {
         __u32                   index;
         enum v4l2_buf_type      type;
         __u32                   bytesused;
@@ -525,13 +519,12 @@ struct v4l2_buffer
 /*
  *      O V E R L A Y   P R E V I E W
  */
-struct v4l2_framebuffer
-{
+struct v4l2_framebuffer {
         __u32                   capability;
         __u32                   flags;
 /* FIXME: in theory we should pass something like PCI device + memory
  * region + offset instead of some physical address */
-        void*                   base;
+        void                    *base;
         struct v4l2_pix_format  fmt;
 };
 /*  Flags for the 'capability' field. Read only */
@@ -550,14 +543,12 @@ struct v4l2_framebuffer
 #define V4L2_FBUF_FLAG_GLOBAL_ALPHA     0x0010
 #define V4L2_FBUF_FLAG_LOCAL_INV_ALPHA  0x0020
 
-struct v4l2_clip
-{
+struct v4l2_clip {
         struct v4l2_rect        c;
         struct v4l2_clip        __user *next;
 };
 
-struct v4l2_window
-{
+struct v4l2_window {
         struct v4l2_rect        w;
         enum v4l2_field         field;
         __u32                   chromakey;
@@ -570,8 +561,7 @@ struct v4l2_window
 /*
  *      C A P T U R E   P A R A M E T E R S
  */
-struct v4l2_captureparm
-{
+struct v4l2_captureparm {
         __u32              capability;    /*  Supported modes */
         __u32              capturemode;   /*  Current mode */
         struct v4l2_fract  timeperframe;  /*  Time per frame in .1us units */
@@ -584,8 +574,7 @@ struct v4l2_captureparm
 #define V4L2_MODE_HIGHQUALITY   0x0001  /*  High quality imaging mode */
 #define V4L2_CAP_TIMEPERFRAME   0x1000  /*  timeperframe field is supported */
 
-struct v4l2_outputparm
-{
+struct v4l2_outputparm {
         __u32              capability;   /*  Supported modes */
         __u32              outputmode;   /*  Current mode */
         struct v4l2_fract  timeperframe; /*  Time per frame in seconds */
@@ -702,8 +691,7 @@ typedef __u64 v4l2_std_id;
 #define V4L2_STD_ALL            (V4L2_STD_525_60        |\
                                  V4L2_STD_625_50)
 
-struct v4l2_standard
-{
+struct v4l2_standard {
         __u32                index;
         v4l2_std_id          id;
         __u8                 name[24];
@@ -715,8 +703,7 @@ struct v4l2_standard
 /*
  *      V I D E O   I N P U T S
  */
-struct v4l2_input
-{
+struct v4l2_input {
         __u32        index;             /*  Which input */
         __u8         name[32];          /*  Label */
         __u32        type;              /*  Type of input */
@@ -753,8 +740,7 @@ struct v4l2_input
 /*
  *      V I D E O   O U T P U T S
  */
-struct v4l2_output
-{
+struct v4l2_output {
         __u32        index;             /*  Which output */
         __u8         name[32];          /*  Label */
         __u32        type;              /*  Type of output */
@@ -771,14 +757,12 @@ struct v4l2_output
 /*
  *      C O N T R O L S
  */
-struct v4l2_control
-{
+struct v4l2_control {
         __u32                id;
         __s32                value;
 };
 
-struct v4l2_ext_control
-{
+struct v4l2_ext_control {
         __u32 id;
         __u32 reserved2[2];
         union {
@@ -788,8 +772,7 @@ struct v4l2_ext_control
         };
 } __attribute__ ((packed));
 
-struct v4l2_ext_controls
-{
+struct v4l2_ext_controls {
         __u32 ctrl_class;
         __u32 count;
         __u32 error_idx;
@@ -807,8 +790,7 @@ struct v4l2_ext_controls
 #define V4L2_CTRL_DRIVER_PRIV(id) (((id) & 0xffff) >= 0x1000)
 
 /*  Used in the VIDIOC_QUERYCTRL ioctl for querying controls */
-struct v4l2_queryctrl
-{
+struct v4l2_queryctrl {
         __u32                id;
         enum v4l2_ctrl_type  type;
         __u8                 name[32];  /* Whatever */
@@ -821,8 +803,7 @@ struct v4l2_queryctrl
 };
 
 /*  Used in the VIDIOC_QUERYMENU ioctl for querying menu items */
-struct v4l2_querymenu
-{
+struct v4l2_querymenu {
         __u32           id;
         __u32           index;
         __u8            name[32];       /* Whatever */
@@ -1104,8 +1085,7 @@ enum  v4l2_exposure_auto_type {
 /*
  *      T U N I N G
  */
-struct v4l2_tuner
-{
+struct v4l2_tuner {
         __u32                   index;
         __u8                    name[32];
         enum v4l2_tuner_type    type;
@@ -1119,8 +1099,7 @@ struct v4l2_tuner
         __u32                   reserved[4];
 };
 
-struct v4l2_modulator
-{
+struct v4l2_modulator {
         __u32                   index;
         __u8                    name[32];
         __u32                   capability;
@@ -1153,8 +1132,7 @@ struct v4l2_modulator
 #define V4L2_TUNER_MODE_LANG1           0x0003
 #define V4L2_TUNER_MODE_LANG1_LANG2     0x0004
 
-struct v4l2_frequency
-{
+struct v4l2_frequency {
         __u32                 tuner;
         enum v4l2_tuner_type  type;
         __u32                 frequency;
@@ -1172,8 +1150,7 @@ struct v4l2_hw_freq_seek {
 /*
  *      A U D I O
  */
-struct v4l2_audio
-{
+struct v4l2_audio {
         __u32   index;
         __u8    name[32];
         __u32   capability;
@@ -1188,8 +1165,7 @@ struct v4l2_audio
 /*  Flags for the 'mode' field */
 #define V4L2_AUDMODE_AVL                0x00001
 
-struct v4l2_audioout
-{
+struct v4l2_audioout {
         __u32   index;
         __u8    name[32];
         __u32   capability;
@@ -1253,8 +1229,7 @@ struct v4l2_encoder_cmd {
  */
 
 /* Raw VBI */
-struct v4l2_vbi_format
-{
+struct v4l2_vbi_format {
         __u32   sampling_rate;          /* in 1 Hz */
         __u32   offset;
         __u32   samples_per_line;
@@ -1266,8 +1241,8 @@ struct v4l2_vbi_format
 };
 
 /*  VBI flags  */
-#define V4L2_VBI_UNSYNC         (1<< 0)
-#define V4L2_VBI_INTERLACED     (1<< 1)
+#define V4L2_VBI_UNSYNC         (1 << 0)
+#define V4L2_VBI_INTERLACED     (1 << 1)
 
 /* Sliced VBI
  *
@@ -1276,8 +1251,7 @@ struct v4l2_vbi_format
  * notice in the definitive implementation.
  */
 
-struct v4l2_sliced_vbi_format
-{
+struct v4l2_sliced_vbi_format {
         __u16   service_set;
         /* service_lines[0][...] specifies lines 0-23 (1-23 used) of the first field
            service_lines[1][...] specifies lines 0-23 (1-23 used) of the second field
@@ -1301,8 +1275,7 @@ struct v4l2_sliced_vbi_format
 #define V4L2_SLICED_VBI_525             (V4L2_SLICED_CAPTION_525)
 #define V4L2_SLICED_VBI_625             (V4L2_SLICED_TELETEXT_B | V4L2_SLICED_VPS | V4L2_SLICED_WSS_625)
 
-struct v4l2_sliced_vbi_cap
-{
+struct v4l2_sliced_vbi_cap {
         __u16   service_set;
         /* service_lines[0][...] specifies lines 0-23 (1-23 used) of the first field
            service_lines[1][...] specifies lines 0-23 (1-23 used) of the second field
@@ -1313,8 +1286,7 @@ struct v4l2_sliced_vbi_cap
         __u32   reserved[3];    /* must be 0 */
 };
 
-struct v4l2_sliced_vbi_data
-{
+struct v4l2_sliced_vbi_data {
         __u32   id;
         __u32   field;          /* 0: first field, 1: second field */
         __u32   line;           /* 1-23 */
@@ -1328,27 +1300,23 @@ struct v4l2_sliced_vbi_data
 
 /*      Stream data format
  */
-struct v4l2_format
-{
+struct v4l2_format {
         enum v4l2_buf_type type;
-        union
-        {
-                struct v4l2_pix_format          pix;     // V4L2_BUF_TYPE_VIDEO_CAPTURE
-                struct v4l2_window              win;     // V4L2_BUF_TYPE_VIDEO_OVERLAY
-                struct v4l2_vbi_format          vbi;     // V4L2_BUF_TYPE_VBI_CAPTURE
-                struct v4l2_sliced_vbi_format   sliced;  // V4L2_BUF_TYPE_SLICED_VBI_CAPTURE
-                __u8    raw_data[200];                   // user-defined
+        union {
+                struct v4l2_pix_format          pix;     /* V4L2_BUF_TYPE_VIDEO_CAPTURE */
+                struct v4l2_window              win;     /* V4L2_BUF_TYPE_VIDEO_OVERLAY */
+                struct v4l2_vbi_format          vbi;     /* V4L2_BUF_TYPE_VBI_CAPTURE */
+                struct v4l2_sliced_vbi_format   sliced;  /* V4L2_BUF_TYPE_SLICED_VBI_CAPTURE */
+                __u8    raw_data[200];                   /* user-defined */
         } fmt;
 };
 
 
 /*      Stream type-dependent parameters
  */
-struct v4l2_streamparm
-{
+struct v4l2_streamparm {
         enum v4l2_buf_type type;
-        union
-        {
+        union {
                 struct v4l2_captureparm capture;
                 struct v4l2_outputparm  output;
                 __u8    raw_data[200];  /* user-defined */
@@ -1386,92 +1354,86 @@ struct v4l2_chip_ident {
  *      I O C T L   C O D E S   F O R   V I D E O   D E V I C E S
  *
  */
-#define VIDIOC_QUERYCAP         _IOR  ('V',  0, struct v4l2_capability)
-#define VIDIOC_RESERVED         _IO   ('V',  1)
-#define VIDIOC_ENUM_FMT         _IOWR ('V',  2, struct v4l2_fmtdesc)
-#define VIDIOC_G_FMT            _IOWR ('V',  4, struct v4l2_format)
-#define VIDIOC_S_FMT            _IOWR ('V',  5, struct v4l2_format)
-#define VIDIOC_REQBUFS          _IOWR ('V',  8, struct v4l2_requestbuffers)
-#define VIDIOC_QUERYBUF         _IOWR ('V',  9, struct v4l2_buffer)
-#define VIDIOC_G_FBUF           _IOR  ('V', 10, struct v4l2_framebuffer)
-#define VIDIOC_S_FBUF           _IOW  ('V', 11, struct v4l2_framebuffer)
-#define VIDIOC_OVERLAY          _IOW  ('V', 14, int)
-#define VIDIOC_QBUF             _IOWR ('V', 15, struct v4l2_buffer)
-#define VIDIOC_DQBUF            _IOWR ('V', 17, struct v4l2_buffer)
-#define VIDIOC_STREAMON         _IOW  ('V', 18, int)
-#define VIDIOC_STREAMOFF        _IOW  ('V', 19, int)
-#define VIDIOC_G_PARM           _IOWR ('V', 21, struct v4l2_streamparm)
-#define VIDIOC_S_PARM           _IOWR ('V', 22, struct v4l2_streamparm)
-#define VIDIOC_G_STD            _IOR  ('V', 23, v4l2_std_id)
-#define VIDIOC_S_STD            _IOW  ('V', 24, v4l2_std_id)
-#define VIDIOC_ENUMSTD          _IOWR ('V', 25, struct v4l2_standard)
-#define VIDIOC_ENUMINPUT        _IOWR ('V', 26, struct v4l2_input)
-#define VIDIOC_G_CTRL           _IOWR ('V', 27, struct v4l2_control)
-#define VIDIOC_S_CTRL           _IOWR ('V', 28, struct v4l2_control)
-#define VIDIOC_G_TUNER          _IOWR ('V', 29, struct v4l2_tuner)
-#define VIDIOC_S_TUNER          _IOW  ('V', 30, struct v4l2_tuner)
-#define VIDIOC_G_AUDIO          _IOR  ('V', 33, struct v4l2_audio)
-#define VIDIOC_S_AUDIO          _IOW  ('V', 34, struct v4l2_audio)
-#define VIDIOC_QUERYCTRL        _IOWR ('V', 36, struct v4l2_queryctrl)
-#define VIDIOC_QUERYMENU        _IOWR ('V', 37, struct v4l2_querymenu)
-#define VIDIOC_G_INPUT          _IOR  ('V', 38, int)
-#define VIDIOC_S_INPUT          _IOWR ('V', 39, int)
-#define VIDIOC_G_OUTPUT         _IOR  ('V', 46, int)
-#define VIDIOC_S_OUTPUT         _IOWR ('V', 47, int)
-#define VIDIOC_ENUMOUTPUT       _IOWR ('V', 48, struct v4l2_output)
-#define VIDIOC_G_AUDOUT         _IOR  ('V', 49, struct v4l2_audioout)
-#define VIDIOC_S_AUDOUT         _IOW  ('V', 50, struct v4l2_audioout)
-#define VIDIOC_G_MODULATOR      _IOWR ('V', 54, struct v4l2_modulator)
-#define VIDIOC_S_MODULATOR      _IOW  ('V', 55, struct v4l2_modulator)
-#define VIDIOC_G_FREQUENCY      _IOWR ('V', 56, struct v4l2_frequency)
-#define VIDIOC_S_FREQUENCY      _IOW  ('V', 57, struct v4l2_frequency)
-#define VIDIOC_CROPCAP          _IOWR ('V', 58, struct v4l2_cropcap)
-#define VIDIOC_G_CROP           _IOWR ('V', 59, struct v4l2_crop)
-#define VIDIOC_S_CROP           _IOW  ('V', 60, struct v4l2_crop)
-#define VIDIOC_G_JPEGCOMP       _IOR  ('V', 61, struct v4l2_jpegcompression)
-#define VIDIOC_S_JPEGCOMP       _IOW  ('V', 62, struct v4l2_jpegcompression)
-#define VIDIOC_QUERYSTD         _IOR  ('V', 63, v4l2_std_id)
-#define VIDIOC_TRY_FMT          _IOWR ('V', 64, struct v4l2_format)
-#define VIDIOC_ENUMAUDIO        _IOWR ('V', 65, struct v4l2_audio)
-#define VIDIOC_ENUMAUDOUT       _IOWR ('V', 66, struct v4l2_audioout)
-#define VIDIOC_G_PRIORITY       _IOR  ('V', 67, enum v4l2_priority)
-#define VIDIOC_S_PRIORITY       _IOW  ('V', 68, enum v4l2_priority)
-#define VIDIOC_G_SLICED_VBI_CAP _IOWR ('V', 69, struct v4l2_sliced_vbi_cap)
-#define VIDIOC_LOG_STATUS       _IO   ('V', 70)
-#define VIDIOC_G_EXT_CTRLS      _IOWR ('V', 71, struct v4l2_ext_controls)
-#define VIDIOC_S_EXT_CTRLS      _IOWR ('V', 72, struct v4l2_ext_controls)
-#define VIDIOC_TRY_EXT_CTRLS    _IOWR ('V', 73, struct v4l2_ext_controls)
+#define VIDIOC_QUERYCAP          _IOR('V',  0, struct v4l2_capability)
+#define VIDIOC_RESERVED           _IO('V',  1)
+#define VIDIOC_ENUM_FMT         _IOWR('V',  2, struct v4l2_fmtdesc)
+#define VIDIOC_G_FMT            _IOWR('V',  4, struct v4l2_format)
+#define VIDIOC_S_FMT            _IOWR('V',  5, struct v4l2_format)
+#define VIDIOC_REQBUFS          _IOWR('V',  8, struct v4l2_requestbuffers)
+#define VIDIOC_QUERYBUF         _IOWR('V',  9, struct v4l2_buffer)
+#define VIDIOC_G_FBUF            _IOR('V', 10, struct v4l2_framebuffer)
+#define VIDIOC_S_FBUF            _IOW('V', 11, struct v4l2_framebuffer)
+#define VIDIOC_OVERLAY           _IOW('V', 14, int)
+#define VIDIOC_QBUF             _IOWR('V', 15, struct v4l2_buffer)
+#define VIDIOC_DQBUF            _IOWR('V', 17, struct v4l2_buffer)
+#define VIDIOC_STREAMON          _IOW('V', 18, int)
+#define VIDIOC_STREAMOFF         _IOW('V', 19, int)
+#define VIDIOC_G_PARM           _IOWR('V', 21, struct v4l2_streamparm)
+#define VIDIOC_S_PARM           _IOWR('V', 22, struct v4l2_streamparm)
+#define VIDIOC_G_STD             _IOR('V', 23, v4l2_std_id)
+#define VIDIOC_S_STD             _IOW('V', 24, v4l2_std_id)
+#define VIDIOC_ENUMSTD          _IOWR('V', 25, struct v4l2_standard)
+#define VIDIOC_ENUMINPUT        _IOWR('V', 26, struct v4l2_input)
+#define VIDIOC_G_CTRL           _IOWR('V', 27, struct v4l2_control)
+#define VIDIOC_S_CTRL           _IOWR('V', 28, struct v4l2_control)
+#define VIDIOC_G_TUNER          _IOWR('V', 29, struct v4l2_tuner)
+#define VIDIOC_S_TUNER           _IOW('V', 30, struct v4l2_tuner)
+#define VIDIOC_G_AUDIO           _IOR('V', 33, struct v4l2_audio)
+#define VIDIOC_S_AUDIO           _IOW('V', 34, struct v4l2_audio)
+#define VIDIOC_QUERYCTRL        _IOWR('V', 36, struct v4l2_queryctrl)
+#define VIDIOC_QUERYMENU        _IOWR('V', 37, struct v4l2_querymenu)
+#define VIDIOC_G_INPUT           _IOR('V', 38, int)
+#define VIDIOC_S_INPUT          _IOWR('V', 39, int)
+#define VIDIOC_G_OUTPUT          _IOR('V', 46, int)
+#define VIDIOC_S_OUTPUT         _IOWR('V', 47, int)
+#define VIDIOC_ENUMOUTPUT       _IOWR('V', 48, struct v4l2_output)
+#define VIDIOC_G_AUDOUT          _IOR('V', 49, struct v4l2_audioout)
+#define VIDIOC_S_AUDOUT          _IOW('V', 50, struct v4l2_audioout)
+#define VIDIOC_G_MODULATOR      _IOWR('V', 54, struct v4l2_modulator)
+#define VIDIOC_S_MODULATOR       _IOW('V', 55, struct v4l2_modulator)
+#define VIDIOC_G_FREQUENCY      _IOWR('V', 56, struct v4l2_frequency)
+#define VIDIOC_S_FREQUENCY       _IOW('V', 57, struct v4l2_frequency)
+#define VIDIOC_CROPCAP          _IOWR('V', 58, struct v4l2_cropcap)
+#define VIDIOC_G_CROP           _IOWR('V', 59, struct v4l2_crop)
+#define VIDIOC_S_CROP            _IOW('V', 60, struct v4l2_crop)
+#define VIDIOC_G_JPEGCOMP        _IOR('V', 61, struct v4l2_jpegcompression)
+#define VIDIOC_S_JPEGCOMP        _IOW('V', 62, struct v4l2_jpegcompression)
+#define VIDIOC_QUERYSTD          _IOR('V', 63, v4l2_std_id)
+#define VIDIOC_TRY_FMT          _IOWR('V', 64, struct v4l2_format)
+#define VIDIOC_ENUMAUDIO        _IOWR('V', 65, struct v4l2_audio)
+#define VIDIOC_ENUMAUDOUT       _IOWR('V', 66, struct v4l2_audioout)
+#define VIDIOC_G_PRIORITY        _IOR('V', 67, enum v4l2_priority)
+#define VIDIOC_S_PRIORITY        _IOW('V', 68, enum v4l2_priority)
+#define VIDIOC_G_SLICED_VBI_CAP _IOWR('V', 69, struct v4l2_sliced_vbi_cap)
+#define VIDIOC_LOG_STATUS         _IO('V', 70)
+#define VIDIOC_G_EXT_CTRLS      _IOWR('V', 71, struct v4l2_ext_controls)
+#define VIDIOC_S_EXT_CTRLS      _IOWR('V', 72, struct v4l2_ext_controls)
+#define VIDIOC_TRY_EXT_CTRLS    _IOWR('V', 73, struct v4l2_ext_controls)
 #if 1
-#define VIDIOC_ENUM_FRAMESIZES  _IOWR ('V', 74, struct v4l2_frmsizeenum)
-#define VIDIOC_ENUM_FRAMEINTERVALS      _IOWR ('V', 75, struct v4l2_frmivalenum)
-#define VIDIOC_G_ENC_INDEX      _IOR  ('V', 76, struct v4l2_enc_idx)
-#define VIDIOC_ENCODER_CMD      _IOWR ('V', 77, struct v4l2_encoder_cmd)
-#define VIDIOC_TRY_ENCODER_CMD  _IOWR ('V', 78, struct v4l2_encoder_cmd)
+#define VIDIOC_ENUM_FRAMESIZES  _IOWR('V', 74, struct v4l2_frmsizeenum)
+#define VIDIOC_ENUM_FRAMEINTERVALS _IOWR('V', 75, struct v4l2_frmivalenum)
+#define VIDIOC_G_ENC_INDEX       _IOR('V', 76, struct v4l2_enc_idx)
+#define VIDIOC_ENCODER_CMD      _IOWR('V', 77, struct v4l2_encoder_cmd)
+#define VIDIOC_TRY_ENCODER_CMD  _IOWR('V', 78, struct v4l2_encoder_cmd)
 
 /* Experimental, only implemented if CONFIG_VIDEO_ADV_DEBUG is defined */
-#define VIDIOC_DBG_S_REGISTER   _IOW  ('V', 79, struct v4l2_register)
-#define VIDIOC_DBG_G_REGISTER   _IOWR ('V', 80, struct v4l2_register)
+#define VIDIOC_DBG_S_REGISTER    _IOW('V', 79, struct v4l2_register)
+#define VIDIOC_DBG_G_REGISTER   _IOWR('V', 80, struct v4l2_register)
 
-#define VIDIOC_G_CHIP_IDENT     _IOWR ('V', 81, struct v4l2_chip_ident)
+#define VIDIOC_G_CHIP_IDENT     _IOWR('V', 81, struct v4l2_chip_ident)
 #endif
-#define VIDIOC_S_HW_FREQ_SEEK   _IOW  ('V', 82, struct v4l2_hw_freq_seek)
+#define VIDIOC_S_HW_FREQ_SEEK    _IOW('V', 82, struct v4l2_hw_freq_seek)
 
 #ifdef __OLD_VIDIOC_
 /* for compatibility, will go away some day */
-#define VIDIOC_OVERLAY_OLD      _IOWR ('V', 14, int)
-#define VIDIOC_S_PARM_OLD       _IOW  ('V', 22, struct v4l2_streamparm)
-#define VIDIOC_S_CTRL_OLD       _IOW  ('V', 28, struct v4l2_control)
-#define VIDIOC_G_AUDIO_OLD      _IOWR ('V', 33, struct v4l2_audio)
-#define VIDIOC_G_AUDOUT_OLD     _IOWR ('V', 49, struct v4l2_audioout)
-#define VIDIOC_CROPCAP_OLD      _IOR  ('V', 58, struct v4l2_cropcap)
+#define VIDIOC_OVERLAY_OLD      _IOWR('V', 14, int)
+#define VIDIOC_S_PARM_OLD        _IOW('V', 22, struct v4l2_streamparm)
+#define VIDIOC_S_CTRL_OLD        _IOW('V', 28, struct v4l2_control)
+#define VIDIOC_G_AUDIO_OLD      _IOWR('V', 33, struct v4l2_audio)
+#define VIDIOC_G_AUDOUT_OLD     _IOWR('V', 49, struct v4l2_audioout)
+#define VIDIOC_CROPCAP_OLD       _IOR('V', 58, struct v4l2_cropcap)
 #endif
 
 #define BASE_VIDIOC_PRIVATE     192             /* 192-255 are private */
 
 #endif /* __LINUX_VIDEODEV2_H */
-
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
diff --git a/include/linux/videotext.h b/include/linux/videotext.h
index 018f92047ff8..3e68c8d1c7f7 100644
--- a/include/linux/videotext.h
+++ b/include/linux/videotext.h
@@ -45,10 +45,10 @@
 #define VTXIOCCLRCACHE_OLD 0x710b  /* clear cache on VTX-interface (if avail.) */
 #define VTXIOCSETVIRT_OLD  0x710c  /* turn on virtual mode (this disables TV-display) */
 
-/* 
+/*
  *      Definitions for VTXIOCGETINFO
  */
- 
+
 #define SAA5243 0
 #define SAA5246 1
 #define SAA5249 2
@@ -57,10 +57,10 @@
 
 typedef struct {
         int version_major, version_minor;       /* version of driver; if version_major changes, driver */
-                                                /* is not backward compatible!!! CHECK THIS!!! */  
+                                                /* is not backward compatible!!! CHECK THIS!!! */
         int numpages;                           /* number of page-buffers of vtx-chipset */
         int cct_type;                           /* type of vtx-chipset (SAA5243, SAA5246, SAA5248 or
-                                                 * SAA5249) */
+                                                 * SAA5249) */
 }
 vtx_info_t;
 
@@ -81,7 +81,7 @@ vtx_info_t;
 #define PGMASK_HOUR (HR_TEN | HR_UNIT)
 #define PGMASK_MINUTE (MIN_TEN | MIN_UNIT)
 
-typedef struct 
+typedef struct
 {
         int page;       /* number of requested page (hexadecimal) */
         int hour;       /* requested hour (hexadecimal) */
@@ -98,11 +98,11 @@ vtx_pagereq_t;
 /*
  *      Definitions for VTXIOC{GETSTAT,PUTSTAT}
  */
- 
+
 #define VTX_PAGESIZE (40 * 24)
 #define VTX_VIRTUALSIZE (40 * 49)
 
-typedef struct 
+typedef struct
 {
         int pagenum;                    /* number of page (hexadecimal) */
         int hour;                       /* hour (hexadecimal) */
@@ -121,5 +121,5 @@ typedef struct
         unsigned hamming : 1;           /* hamming-error occurred */
 }
 vtx_pageinfo_t;
- 
+
 #endif /* _VTX_H */
diff --git a/include/media/audiochip.h b/include/media/audiochip.h
index db8823d45a7d..e69de29bb2d1 100644
--- a/include/media/audiochip.h
+++ b/include/media/audiochip.h
@@ -1,26 +0,0 @@
-/*
- */
-
-#ifndef AUDIOCHIP_H
-#define AUDIOCHIP_H
-
-enum audiochip {
-        AUDIO_CHIP_NONE,
-        AUDIO_CHIP_UNKNOWN,
-        /* Provided by video chip */
-        AUDIO_CHIP_INTERNAL,
-        /* Provided by tvaudio.c */
-        AUDIO_CHIP_TDA8425,
-        AUDIO_CHIP_TEA6300,
-        AUDIO_CHIP_TEA6420,
-        AUDIO_CHIP_TDA9840,
-        AUDIO_CHIP_TDA985X,
-        AUDIO_CHIP_TDA9874,
-        AUDIO_CHIP_PIC16C54,
-        /* Provided by msp3400.c */
-        AUDIO_CHIP_MSP34XX,
-        /* Provided by wm8775.c */
-        AUDIO_CHIP_WM8775
-};
-
-#endif /* AUDIOCHIP_H */
diff --git a/include/media/saa7146_vv.h b/include/media/saa7146_vv.h
index 89c442eb8849..1d104096619c 100644
--- a/include/media/saa7146_vv.h
+++ b/include/media/saa7146_vv.h
@@ -2,6 +2,7 @@
 #define __SAA7146_VV__
 
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <media/saa7146.h>
 #include <media/videobuf-dma-sg.h>
 
diff --git a/include/media/tveeprom.h b/include/media/tveeprom.h
index 5660ea24996b..a8ad75a9152a 100644
--- a/include/media/tveeprom.h
+++ b/include/media/tveeprom.h
@@ -3,7 +3,12 @@
 
 struct tveeprom {
         u32 has_radio;
-        u32 has_ir;     /* bit 0: IR receiver present, bit 1: IR transmitter (blaster) present. -1 == unknown */
+        /* If has_ir == 0, then it is unknown what the IR capabilities are,
+           otherwise:
+           bit 0: 1 (= IR capabilities are known)
+           bit 1: IR receiver present
+           bit 2: IR transmitter (blaster) present */
+        u32 has_ir;
         u32 has_MAC_address; /* 0: no MAC, 1: MAC present, 2: unknown */
 
         u32 tuner_type;
diff --git a/include/media/v4l2-chip-ident.h b/include/media/v4l2-chip-ident.h
index 2a527742701a..41b509babf3f 100644
--- a/include/media/v4l2-chip-ident.h
+++ b/include/media/v4l2-chip-ident.h
@@ -90,7 +90,10 @@ enum {
         /* module m52790: just ident 52790 */
         V4L2_IDENT_M52790 = 52790,
 
-        /* module msp34xx: reserved range 34000-34999 */
+        /* module msp3400: reserved range 34000-34999 and 44000-44999 */
+        V4L2_IDENT_MSPX4XX  = 34000, /* generic MSPX4XX identifier, only
+                                        use internally (tveeprom.c). */
+
         V4L2_IDENT_MSP3400B = 34002,
         V4L2_IDENT_MSP3410B = 34102,
 
@@ -142,7 +145,7 @@ enum {
         V4L2_IDENT_MSP3457G = 34577,
         V4L2_IDENT_MSP3467G = 34677,
 
-        /* module msp44xx: reserved range 44000-44999 */
+        /* module msp3400: reserved range 34000-34999 and 44000-44999 */
         V4L2_IDENT_MSP4400G = 44007,
         V4L2_IDENT_MSP4410G = 44107,
         V4L2_IDENT_MSP4420G = 44207,
diff --git a/include/media/v4l2-common.h b/include/media/v4l2-common.h
index 020d05758bd8..07d3a9a575d1 100644
--- a/include/media/v4l2-common.h
+++ b/include/media/v4l2-common.h
@@ -28,12 +28,6 @@
 
 #include <media/v4l2-dev.h>
 
-/* v4l debugging and diagnostics */
-
-/* Debug bitmask flags to be used on V4L2 */
-#define V4L2_DEBUG_IOCTL     0x01
-#define V4L2_DEBUG_IOCTL_ARG 0x02
-
 /* Common printk constucts for v4l-i2c drivers. These macros create a unique
    prefix consisting of the driver name, the adapter number and the i2c
    address. */
@@ -61,21 +55,20 @@
                         v4l_client_printk(KERN_DEBUG, client, fmt , ## arg); \
         } while (0)
 
+/* ------------------------------------------------------------------------- */
 
-/* Use this macro for non-I2C drivers. Pass the driver name as the first arg. */
-#define v4l_print_ioctl(name, cmd)               \
-        do {                                     \
-                printk(KERN_DEBUG "%s: ", name); \
-                v4l_printk_ioctl(cmd);           \
-        } while (0)
+/* Priority helper functions */
 
-/* Use this macro in I2C drivers where 'client' is the struct i2c_client
-   pointer */
-#define v4l_i2c_print_ioctl(client, cmd)                   \
-        do {                                               \
-                v4l_client_printk(KERN_DEBUG, client, ""); \
-                v4l_printk_ioctl(cmd);                     \
-        } while (0)
+struct v4l2_prio_state {
+        atomic_t prios[4];
+};
+int v4l2_prio_init(struct v4l2_prio_state *global);
+int v4l2_prio_change(struct v4l2_prio_state *global, enum v4l2_priority *local,
+                     enum v4l2_priority new);
+int v4l2_prio_open(struct v4l2_prio_state *global, enum v4l2_priority *local);
+int v4l2_prio_close(struct v4l2_prio_state *global, enum v4l2_priority *local);
+enum v4l2_priority v4l2_prio_max(struct v4l2_prio_state *global);
+int v4l2_prio_check(struct v4l2_prio_state *global, enum v4l2_priority *local);
 
 /* ------------------------------------------------------------------------- */
 
diff --git a/include/media/v4l2-dev.h b/include/media/v4l2-dev.h
index 33f379b1ecfe..2745e1afc722 100644
--- a/include/media/v4l2-dev.h
+++ b/include/media/v4l2-dev.h
@@ -9,7 +9,6 @@
 #ifndef _V4L2_DEV_H
 #define _V4L2_DEV_H
 
-#define OBSOLETE_OWNER   1 /* to be removed soon */
 #define OBSOLETE_DEVDATA 1 /* to be removed soon */
 
 #include <linux/poll.h>
@@ -17,11 +16,7 @@
 #include <linux/device.h>
 #include <linux/mutex.h>
 #include <linux/compiler.h> /* need __user */
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-#include <linux/videodev.h>
-#else
 #include <linux/videodev2.h>
-#endif
 
 #define VIDEO_MAJOR     81
 /* Minor device allocation */
@@ -39,42 +34,7 @@
 #define VFL_TYPE_RADIO          2
 #define VFL_TYPE_VTX            3
 
-/*  Video standard functions  */
-extern const char *v4l2_norm_to_name(v4l2_std_id id);
-extern int v4l2_video_std_construct(struct v4l2_standard *vs,
-                                    int id, const char *name);
-/* Prints the ioctl in a human-readable format */
-extern void v4l_printk_ioctl(unsigned int cmd);
-
-/* prority handling */
-struct v4l2_prio_state {
-        atomic_t prios[4];
-};
-int v4l2_prio_init(struct v4l2_prio_state *global);
-int v4l2_prio_change(struct v4l2_prio_state *global, enum v4l2_priority *local,
-                     enum v4l2_priority new);
-int v4l2_prio_open(struct v4l2_prio_state *global, enum v4l2_priority *local);
-int v4l2_prio_close(struct v4l2_prio_state *global, enum v4l2_priority *local);
-enum v4l2_priority v4l2_prio_max(struct v4l2_prio_state *global);
-int v4l2_prio_check(struct v4l2_prio_state *global, enum v4l2_priority *local);
-
-/* names for fancy debug output */
-extern const char *v4l2_field_names[];
-extern const char *v4l2_type_names[];
-
-/*  Compatibility layer interface  --  v4l1-compat module */
-typedef int (*v4l2_kioctl)(struct inode *inode, struct file *file,
-                           unsigned int cmd, void *arg);
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-int v4l_compat_translate_ioctl(struct inode *inode, struct file *file,
-                               int cmd, void *arg, v4l2_kioctl driver_ioctl);
-#else
-#define v4l_compat_translate_ioctl(inode,file,cmd,arg,ioctl) -EINVAL
-#endif
-
-/* 32 Bits compatibility layer for 64 bits processors */
-extern long v4l_compat_ioctl32(struct file *file, unsigned int cmd,
-                                unsigned long arg);
+struct v4l2_ioctl_callbacks;
 
 /*
  * Newer version of video_device, handled by videodev2.c
@@ -88,18 +48,17 @@ struct video_device
         const struct file_operations *fops;
 
         /* sysfs */
-        struct device class_dev;        /* v4l device */
-        struct device *dev;             /* device parent */
+        struct device dev;              /* v4l device */
+        struct device *parent;          /* device parent */
 
         /* device info */
         char name[32];
-        int type;       /* v4l1 */
-        int type2;      /* v4l2 */
+        int vfl_type;
         int minor;
-        /* attribute to diferentiate multiple indexs on one physical device */
+        /* attribute to differentiate multiple indices on one physical device */
         int index;
 
-        int debug;      /* Activates debug level*/
+        int debug;                      /* Activates debug level*/
 
         /* Video standard vars */
         v4l2_std_id tvnorms;            /* Supported tv norms */
@@ -109,285 +68,36 @@ struct video_device
         void (*release)(struct video_device *vfd);
 
         /* ioctl callbacks */
+        const struct v4l2_ioctl_ops *ioctl_ops;
 
-        /* VIDIOC_QUERYCAP handler */
-        int (*vidioc_querycap)(struct file *file, void *fh, struct v4l2_capability *cap);
-
-        /* Priority handling */
-        int (*vidioc_g_priority)   (struct file *file, void *fh,
-                                    enum v4l2_priority *p);
-        int (*vidioc_s_priority)   (struct file *file, void *fh,
-                                    enum v4l2_priority p);
-
-        /* VIDIOC_ENUM_FMT handlers */
-        int (*vidioc_enum_fmt_vid_cap)     (struct file *file, void *fh,
-                                            struct v4l2_fmtdesc *f);
-        int (*vidioc_enum_fmt_vid_overlay) (struct file *file, void *fh,
-                                            struct v4l2_fmtdesc *f);
-        int (*vidioc_enum_fmt_vid_out)     (struct file *file, void *fh,
-                                            struct v4l2_fmtdesc *f);
-#if 1
-        /* deprecated, will be removed in 2.6.28 */
-        int (*vidioc_enum_fmt_vbi_cap)     (struct file *file, void *fh,
-                                            struct v4l2_fmtdesc *f);
-#endif
-        int (*vidioc_enum_fmt_type_private)(struct file *file, void *fh,
-                                            struct v4l2_fmtdesc *f);
-
-        /* VIDIOC_G_FMT handlers */
-        int (*vidioc_g_fmt_vid_cap)    (struct file *file, void *fh,
-                                        struct v4l2_format *f);
-        int (*vidioc_g_fmt_vid_overlay)(struct file *file, void *fh,
-                                        struct v4l2_format *f);
-        int (*vidioc_g_fmt_vid_out)    (struct file *file, void *fh,
-                                        struct v4l2_format *f);
-        int (*vidioc_g_fmt_vid_out_overlay)(struct file *file, void *fh,
-                                        struct v4l2_format *f);
-        int (*vidioc_g_fmt_vbi_cap)    (struct file *file, void *fh,
-                                        struct v4l2_format *f);
-        int (*vidioc_g_fmt_vbi_out)    (struct file *file, void *fh,
-                                        struct v4l2_format *f);
-        int (*vidioc_g_fmt_sliced_vbi_cap)(struct file *file, void *fh,
-                                        struct v4l2_format *f);
-        int (*vidioc_g_fmt_sliced_vbi_out)(struct file *file, void *fh,
-                                        struct v4l2_format *f);
-        int (*vidioc_g_fmt_type_private)(struct file *file, void *fh,
-                                        struct v4l2_format *f);
-
-        /* VIDIOC_S_FMT handlers */
-        int (*vidioc_s_fmt_vid_cap)    (struct file *file, void *fh,
-                                        struct v4l2_format *f);
-        int (*vidioc_s_fmt_vid_overlay)(struct file *file, void *fh,
-                                        struct v4l2_format *f);
-        int (*vidioc_s_fmt_vid_out)    (struct file *file, void *fh,
-                                        struct v4l2_format *f);
-        int (*vidioc_s_fmt_vid_out_overlay)(struct file *file, void *fh,
-                                        struct v4l2_format *f);
-        int (*vidioc_s_fmt_vbi_cap)    (struct file *file, void *fh,
-                                        struct v4l2_format *f);
-        int (*vidioc_s_fmt_vbi_out)    (struct file *file, void *fh,
-                                        struct v4l2_format *f);
-        int (*vidioc_s_fmt_sliced_vbi_cap)(struct file *file, void *fh,
-                                        struct v4l2_format *f);
-        int (*vidioc_s_fmt_sliced_vbi_out)(struct file *file, void *fh,
-                                        struct v4l2_format *f);
-        int (*vidioc_s_fmt_type_private)(struct file *file, void *fh,
-                                        struct v4l2_format *f);
-
-        /* VIDIOC_TRY_FMT handlers */
-        int (*vidioc_try_fmt_vid_cap)    (struct file *file, void *fh,
-                                          struct v4l2_format *f);
-        int (*vidioc_try_fmt_vid_overlay)(struct file *file, void *fh,
-                                          struct v4l2_format *f);
-        int (*vidioc_try_fmt_vid_out)    (struct file *file, void *fh,
-                                          struct v4l2_format *f);
-        int (*vidioc_try_fmt_vid_out_overlay)(struct file *file, void *fh,
-                                          struct v4l2_format *f);
-        int (*vidioc_try_fmt_vbi_cap)    (struct file *file, void *fh,
-                                          struct v4l2_format *f);
-        int (*vidioc_try_fmt_vbi_out)    (struct file *file, void *fh,
-                                          struct v4l2_format *f);
-        int (*vidioc_try_fmt_sliced_vbi_cap)(struct file *file, void *fh,
-                                          struct v4l2_format *f);
-        int (*vidioc_try_fmt_sliced_vbi_out)(struct file *file, void *fh,
-                                          struct v4l2_format *f);
-        int (*vidioc_try_fmt_type_private)(struct file *file, void *fh,
-                                          struct v4l2_format *f);
-
-        /* Buffer handlers */
-        int (*vidioc_reqbufs) (struct file *file, void *fh, struct v4l2_requestbuffers *b);
-        int (*vidioc_querybuf)(struct file *file, void *fh, struct v4l2_buffer *b);
-        int (*vidioc_qbuf)    (struct file *file, void *fh, struct v4l2_buffer *b);
-        int (*vidioc_dqbuf)   (struct file *file, void *fh, struct v4l2_buffer *b);
-
-
-        int (*vidioc_overlay) (struct file *file, void *fh, unsigned int i);
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-                        /* buffer type is struct vidio_mbuf * */
-        int (*vidiocgmbuf)  (struct file *file, void *fh, struct video_mbuf *p);
-#endif
-        int (*vidioc_g_fbuf)   (struct file *file, void *fh,
-                                struct v4l2_framebuffer *a);
-        int (*vidioc_s_fbuf)   (struct file *file, void *fh,
-                                struct v4l2_framebuffer *a);
-
-                /* Stream on/off */
-        int (*vidioc_streamon) (struct file *file, void *fh, enum v4l2_buf_type i);
-        int (*vidioc_streamoff)(struct file *file, void *fh, enum v4l2_buf_type i);
-
-                /* Standard handling
-                        ENUMSTD is handled by videodev.c
-                 */
-        int (*vidioc_g_std) (struct file *file, void *fh, v4l2_std_id *norm);
-        int (*vidioc_s_std) (struct file *file, void *fh, v4l2_std_id *norm);
-        int (*vidioc_querystd) (struct file *file, void *fh, v4l2_std_id *a);
-
-                /* Input handling */
-        int (*vidioc_enum_input)(struct file *file, void *fh,
-                                 struct v4l2_input *inp);
-        int (*vidioc_g_input)   (struct file *file, void *fh, unsigned int *i);
-        int (*vidioc_s_input)   (struct file *file, void *fh, unsigned int i);
-
-                /* Output handling */
-        int (*vidioc_enum_output) (struct file *file, void *fh,
-                                  struct v4l2_output *a);
-        int (*vidioc_g_output)   (struct file *file, void *fh, unsigned int *i);
-        int (*vidioc_s_output)   (struct file *file, void *fh, unsigned int i);
-
-                /* Control handling */
-        int (*vidioc_queryctrl)        (struct file *file, void *fh,
-                                        struct v4l2_queryctrl *a);
-        int (*vidioc_g_ctrl)           (struct file *file, void *fh,
-                                        struct v4l2_control *a);
-        int (*vidioc_s_ctrl)           (struct file *file, void *fh,
-                                        struct v4l2_control *a);
-        int (*vidioc_g_ext_ctrls)      (struct file *file, void *fh,
-                                        struct v4l2_ext_controls *a);
-        int (*vidioc_s_ext_ctrls)      (struct file *file, void *fh,
-                                        struct v4l2_ext_controls *a);
-        int (*vidioc_try_ext_ctrls)    (struct file *file, void *fh,
-                                        struct v4l2_ext_controls *a);
-        int (*vidioc_querymenu)        (struct file *file, void *fh,
-                                        struct v4l2_querymenu *a);
-
-        /* Audio ioctls */
-        int (*vidioc_enumaudio)        (struct file *file, void *fh,
-                                        struct v4l2_audio *a);
-        int (*vidioc_g_audio)          (struct file *file, void *fh,
-                                        struct v4l2_audio *a);
-        int (*vidioc_s_audio)          (struct file *file, void *fh,
-                                        struct v4l2_audio *a);
-
-        /* Audio out ioctls */
-        int (*vidioc_enumaudout)       (struct file *file, void *fh,
-                                        struct v4l2_audioout *a);
-        int (*vidioc_g_audout)         (struct file *file, void *fh,
-                                        struct v4l2_audioout *a);
-        int (*vidioc_s_audout)         (struct file *file, void *fh,
-                                        struct v4l2_audioout *a);
-        int (*vidioc_g_modulator)      (struct file *file, void *fh,
-                                        struct v4l2_modulator *a);
-        int (*vidioc_s_modulator)      (struct file *file, void *fh,
-                                        struct v4l2_modulator *a);
-        /* Crop ioctls */
-        int (*vidioc_cropcap)          (struct file *file, void *fh,
-                                        struct v4l2_cropcap *a);
-        int (*vidioc_g_crop)           (struct file *file, void *fh,
-                                        struct v4l2_crop *a);
-        int (*vidioc_s_crop)           (struct file *file, void *fh,
-                                        struct v4l2_crop *a);
-        /* Compression ioctls */
-        int (*vidioc_g_jpegcomp)       (struct file *file, void *fh,
-                                        struct v4l2_jpegcompression *a);
-        int (*vidioc_s_jpegcomp)       (struct file *file, void *fh,
-                                        struct v4l2_jpegcompression *a);
-        int (*vidioc_g_enc_index)      (struct file *file, void *fh,
-                                        struct v4l2_enc_idx *a);
-        int (*vidioc_encoder_cmd)      (struct file *file, void *fh,
-                                        struct v4l2_encoder_cmd *a);
-        int (*vidioc_try_encoder_cmd)  (struct file *file, void *fh,
-                                        struct v4l2_encoder_cmd *a);
-
-        /* Stream type-dependent parameter ioctls */
-        int (*vidioc_g_parm)           (struct file *file, void *fh,
-                                        struct v4l2_streamparm *a);
-        int (*vidioc_s_parm)           (struct file *file, void *fh,
-                                        struct v4l2_streamparm *a);
-
-        /* Tuner ioctls */
-        int (*vidioc_g_tuner)          (struct file *file, void *fh,
-                                        struct v4l2_tuner *a);
-        int (*vidioc_s_tuner)          (struct file *file, void *fh,
-                                        struct v4l2_tuner *a);
-        int (*vidioc_g_frequency)      (struct file *file, void *fh,
-                                        struct v4l2_frequency *a);
-        int (*vidioc_s_frequency)      (struct file *file, void *fh,
-                                        struct v4l2_frequency *a);
-
-        /* Sliced VBI cap */
-        int (*vidioc_g_sliced_vbi_cap) (struct file *file, void *fh,
-                                        struct v4l2_sliced_vbi_cap *a);
-
-        /* Log status ioctl */
-        int (*vidioc_log_status)       (struct file *file, void *fh);
-
-        int (*vidioc_s_hw_freq_seek)   (struct file *file, void *fh,
-                                        struct v4l2_hw_freq_seek *a);
-
-        /* Debugging ioctls */
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-        int (*vidioc_g_register)       (struct file *file, void *fh,
-                                        struct v4l2_register *reg);
-        int (*vidioc_s_register)       (struct file *file, void *fh,
-                                        struct v4l2_register *reg);
-#endif
-        int (*vidioc_g_chip_ident)     (struct file *file, void *fh,
-                                        struct v4l2_chip_ident *chip);
-
-        /* For other private ioctls */
-        int (*vidioc_default)          (struct file *file, void *fh,
-                                        int cmd, void *arg);
-
-
-#ifdef OBSOLETE_OWNER /* to be removed soon */
-/* obsolete -- fops->owner is used instead */
-struct module *owner;
-/* dev->driver_data will be used instead some day.
-        * Use the video_{get|set}_drvdata() helper functions,
-        * so the switch over will be transparent for you.
-        * Or use {pci|usb}_{get|set}_drvdata() directly. */
-void *priv;
+#ifdef OBSOLETE_DEVDATA /* to be removed soon */
+        /* dev->driver_data will be used instead some day.
+         * Use the video_{get|set}_drvdata() helper functions,
+         * so the switch over will be transparent for you.
+         * Or use {pci|usb}_{get|set}_drvdata() directly. */
+        void *priv;
 #endif
 
-        /* for videodev.c intenal usage -- please don't touch */
+        /* for videodev.c internal usage -- please don't touch */
         int users;                     /* video_exclusive_{open|close} ... */
         struct mutex lock;             /* ... helper function uses these   */
 };
 
 /* Class-dev to video-device */
-#define to_video_device(cd) container_of(cd, struct video_device, class_dev)
+#define to_video_device(cd) container_of(cd, struct video_device, dev)
 
 /* Version 2 functions */
 extern int video_register_device(struct video_device *vfd, int type, int nr);
 int video_register_device_index(struct video_device *vfd, int type, int nr,
                                         int index);
 void video_unregister_device(struct video_device *);
-extern int video_ioctl2(struct inode *inode, struct file *file,
-                          unsigned int cmd, unsigned long arg);
 
 /* helper functions to alloc / release struct video_device, the
    later can be used for video_device->release() */
 struct video_device *video_device_alloc(void);
 void video_device_release(struct video_device *vfd);
 
-/* Include support for obsoleted stuff */
-extern int video_usercopy(struct inode *inode, struct file *file,
-                          unsigned int cmd, unsigned long arg,
-                          int (*func)(struct inode *inode, struct file *file,
-                                      unsigned int cmd, void *arg));
-
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-#include <linux/mm.h>
-
-static inline int __must_check
-video_device_create_file(struct video_device *vfd,
-                         struct device_attribute *attr)
-{
-        int ret = device_create_file(&vfd->class_dev, attr);
-        if (ret < 0)
-                printk(KERN_WARNING "%s error: %d\n", __func__, ret);
-        return ret;
-}
-static inline void
-video_device_remove_file(struct video_device *vfd,
-                         struct device_attribute *attr)
-{
-        device_remove_file(&vfd->class_dev, attr);
-}
-
-#endif /* CONFIG_VIDEO_V4L1_COMPAT */
-
-#ifdef OBSOLETE_OWNER /* to be removed soon */
+#ifdef OBSOLETE_DEVDATA /* to be removed soon */
 /* helper functions to access driver private data. */
 static inline void *video_get_drvdata(struct video_device *dev)
 {
@@ -399,9 +109,6 @@ static inline void video_set_drvdata(struct video_device *dev, void *data)
         dev->priv = data;
 }
 
-#endif
-
-#ifdef OBSOLETE_DEVDATA /* to be removed soon */
 /* Obsolete stuff - Still needed for radio devices and obsolete drivers */
 extern struct video_device* video_devdata(struct file*);
 extern int video_exclusive_open(struct inode *inode, struct file *file);
diff --git a/include/media/v4l2-ioctl.h b/include/media/v4l2-ioctl.h
new file mode 100644
index 000000000000..dc6404618555
--- /dev/null
+++ b/include/media/v4l2-ioctl.h
@@ -0,0 +1,301 @@
+/*
+ *
+ *      V 4 L 2   D R I V E R   H E L P E R   A P I
+ *
+ * Moved from videodev2.h
+ *
+ *      Some commonly needed functions for drivers (v4l2-common.o module)
+ */
+#ifndef _V4L2_IOCTL_H
+#define _V4L2_IOCTL_H
+
+#include <linux/poll.h>
+#include <linux/fs.h>
+#include <linux/device.h>
+#include <linux/mutex.h>
+#include <linux/compiler.h> /* need __user */
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
+#include <linux/videodev.h>
+#else
+#include <linux/videodev2.h>
+#endif
+
+struct v4l2_ioctl_ops {
+        /* ioctl callbacks */
+
+        /* VIDIOC_QUERYCAP handler */
+        int (*vidioc_querycap)(struct file *file, void *fh, struct v4l2_capability *cap);
+
+        /* Priority handling */
+        int (*vidioc_g_priority)   (struct file *file, void *fh,
+                                    enum v4l2_priority *p);
+        int (*vidioc_s_priority)   (struct file *file, void *fh,
+                                    enum v4l2_priority p);
+
+        /* VIDIOC_ENUM_FMT handlers */
+        int (*vidioc_enum_fmt_vid_cap)     (struct file *file, void *fh,
+                                            struct v4l2_fmtdesc *f);
+        int (*vidioc_enum_fmt_vid_overlay) (struct file *file, void *fh,
+                                            struct v4l2_fmtdesc *f);
+        int (*vidioc_enum_fmt_vid_out)     (struct file *file, void *fh,
+                                            struct v4l2_fmtdesc *f);
+#if 1
+        /* deprecated, will be removed in 2.6.28 */
+        int (*vidioc_enum_fmt_vbi_cap)     (struct file *file, void *fh,
+                                            struct v4l2_fmtdesc *f);
+#endif
+        int (*vidioc_enum_fmt_type_private)(struct file *file, void *fh,
+                                            struct v4l2_fmtdesc *f);
+
+        /* VIDIOC_G_FMT handlers */
+        int (*vidioc_g_fmt_vid_cap)    (struct file *file, void *fh,
+                                        struct v4l2_format *f);
+        int (*vidioc_g_fmt_vid_overlay)(struct file *file, void *fh,
+                                        struct v4l2_format *f);
+        int (*vidioc_g_fmt_vid_out)    (struct file *file, void *fh,
+                                        struct v4l2_format *f);
+        int (*vidioc_g_fmt_vid_out_overlay)(struct file *file, void *fh,
+                                        struct v4l2_format *f);
+        int (*vidioc_g_fmt_vbi_cap)    (struct file *file, void *fh,
+                                        struct v4l2_format *f);
+        int (*vidioc_g_fmt_vbi_out)    (struct file *file, void *fh,
+                                        struct v4l2_format *f);
+        int (*vidioc_g_fmt_sliced_vbi_cap)(struct file *file, void *fh,
+                                        struct v4l2_format *f);
+        int (*vidioc_g_fmt_sliced_vbi_out)(struct file *file, void *fh,
+                                        struct v4l2_format *f);
+        int (*vidioc_g_fmt_type_private)(struct file *file, void *fh,
+                                        struct v4l2_format *f);
+
+        /* VIDIOC_S_FMT handlers */
+        int (*vidioc_s_fmt_vid_cap)    (struct file *file, void *fh,
+                                        struct v4l2_format *f);
+        int (*vidioc_s_fmt_vid_overlay)(struct file *file, void *fh,
+                                        struct v4l2_format *f);
+        int (*vidioc_s_fmt_vid_out)    (struct file *file, void *fh,
+                                        struct v4l2_format *f);
+        int (*vidioc_s_fmt_vid_out_overlay)(struct file *file, void *fh,
+                                        struct v4l2_format *f);
+        int (*vidioc_s_fmt_vbi_cap)    (struct file *file, void *fh,
+                                        struct v4l2_format *f);
+        int (*vidioc_s_fmt_vbi_out)    (struct file *file, void *fh,
+                                        struct v4l2_format *f);
+        int (*vidioc_s_fmt_sliced_vbi_cap)(struct file *file, void *fh,
+                                        struct v4l2_format *f);
+        int (*vidioc_s_fmt_sliced_vbi_out)(struct file *file, void *fh,
+                                        struct v4l2_format *f);
+        int (*vidioc_s_fmt_type_private)(struct file *file, void *fh,
+                                        struct v4l2_format *f);
+
+        /* VIDIOC_TRY_FMT handlers */
+        int (*vidioc_try_fmt_vid_cap)    (struct file *file, void *fh,
+                                          struct v4l2_format *f);
+        int (*vidioc_try_fmt_vid_overlay)(struct file *file, void *fh,
+                                          struct v4l2_format *f);
+        int (*vidioc_try_fmt_vid_out)    (struct file *file, void *fh,
+                                          struct v4l2_format *f);
+        int (*vidioc_try_fmt_vid_out_overlay)(struct file *file, void *fh,
+                                          struct v4l2_format *f);
+        int (*vidioc_try_fmt_vbi_cap)    (struct file *file, void *fh,
+                                          struct v4l2_format *f);
+        int (*vidioc_try_fmt_vbi_out)    (struct file *file, void *fh,
+                                          struct v4l2_format *f);
+        int (*vidioc_try_fmt_sliced_vbi_cap)(struct file *file, void *fh,
+                                          struct v4l2_format *f);
+        int (*vidioc_try_fmt_sliced_vbi_out)(struct file *file, void *fh,
+                                          struct v4l2_format *f);
+        int (*vidioc_try_fmt_type_private)(struct file *file, void *fh,
+                                          struct v4l2_format *f);
+
+        /* Buffer handlers */
+        int (*vidioc_reqbufs) (struct file *file, void *fh, struct v4l2_requestbuffers *b);
+        int (*vidioc_querybuf)(struct file *file, void *fh, struct v4l2_buffer *b);
+        int (*vidioc_qbuf)    (struct file *file, void *fh, struct v4l2_buffer *b);
+        int (*vidioc_dqbuf)   (struct file *file, void *fh, struct v4l2_buffer *b);
+
+
+        int (*vidioc_overlay) (struct file *file, void *fh, unsigned int i);
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
+                        /* buffer type is struct vidio_mbuf * */
+        int (*vidiocgmbuf)  (struct file *file, void *fh, struct video_mbuf *p);
+#endif
+        int (*vidioc_g_fbuf)   (struct file *file, void *fh,
+                                struct v4l2_framebuffer *a);
+        int (*vidioc_s_fbuf)   (struct file *file, void *fh,
+                                struct v4l2_framebuffer *a);
+
+                /* Stream on/off */
+        int (*vidioc_streamon) (struct file *file, void *fh, enum v4l2_buf_type i);
+        int (*vidioc_streamoff)(struct file *file, void *fh, enum v4l2_buf_type i);
+
+                /* Standard handling
+                        ENUMSTD is handled by videodev.c
+                 */
+        int (*vidioc_g_std) (struct file *file, void *fh, v4l2_std_id *norm);
+        int (*vidioc_s_std) (struct file *file, void *fh, v4l2_std_id *norm);
+        int (*vidioc_querystd) (struct file *file, void *fh, v4l2_std_id *a);
+
+                /* Input handling */
+        int (*vidioc_enum_input)(struct file *file, void *fh,
+                                 struct v4l2_input *inp);
+        int (*vidioc_g_input)   (struct file *file, void *fh, unsigned int *i);
+        int (*vidioc_s_input)   (struct file *file, void *fh, unsigned int i);
+
+                /* Output handling */
+        int (*vidioc_enum_output) (struct file *file, void *fh,
+                                  struct v4l2_output *a);
+        int (*vidioc_g_output)   (struct file *file, void *fh, unsigned int *i);
+        int (*vidioc_s_output)   (struct file *file, void *fh, unsigned int i);
+
+                /* Control handling */
+        int (*vidioc_queryctrl)        (struct file *file, void *fh,
+                                        struct v4l2_queryctrl *a);
+        int (*vidioc_g_ctrl)           (struct file *file, void *fh,
+                                        struct v4l2_control *a);
+        int (*vidioc_s_ctrl)           (struct file *file, void *fh,
+                                        struct v4l2_control *a);
+        int (*vidioc_g_ext_ctrls)      (struct file *file, void *fh,
+                                        struct v4l2_ext_controls *a);
+        int (*vidioc_s_ext_ctrls)      (struct file *file, void *fh,
+                                        struct v4l2_ext_controls *a);
+        int (*vidioc_try_ext_ctrls)    (struct file *file, void *fh,
+                                        struct v4l2_ext_controls *a);
+        int (*vidioc_querymenu)        (struct file *file, void *fh,
+                                        struct v4l2_querymenu *a);
+
+        /* Audio ioctls */
+        int (*vidioc_enumaudio)        (struct file *file, void *fh,
+                                        struct v4l2_audio *a);
+        int (*vidioc_g_audio)          (struct file *file, void *fh,
+                                        struct v4l2_audio *a);
+        int (*vidioc_s_audio)          (struct file *file, void *fh,
+                                        struct v4l2_audio *a);
+
+        /* Audio out ioctls */
+        int (*vidioc_enumaudout)       (struct file *file, void *fh,
+                                        struct v4l2_audioout *a);
+        int (*vidioc_g_audout)         (struct file *file, void *fh,
+                                        struct v4l2_audioout *a);
+        int (*vidioc_s_audout)         (struct file *file, void *fh,
+                                        struct v4l2_audioout *a);
+        int (*vidioc_g_modulator)      (struct file *file, void *fh,
+                                        struct v4l2_modulator *a);
+        int (*vidioc_s_modulator)      (struct file *file, void *fh,
+                                        struct v4l2_modulator *a);
+        /* Crop ioctls */
+        int (*vidioc_cropcap)          (struct file *file, void *fh,
+                                        struct v4l2_cropcap *a);
+        int (*vidioc_g_crop)           (struct file *file, void *fh,
+                                        struct v4l2_crop *a);
+        int (*vidioc_s_crop)           (struct file *file, void *fh,
+                                        struct v4l2_crop *a);
+        /* Compression ioctls */
+        int (*vidioc_g_jpegcomp)       (struct file *file, void *fh,
+                                        struct v4l2_jpegcompression *a);
+        int (*vidioc_s_jpegcomp)       (struct file *file, void *fh,
+                                        struct v4l2_jpegcompression *a);
+        int (*vidioc_g_enc_index)      (struct file *file, void *fh,
+                                        struct v4l2_enc_idx *a);
+        int (*vidioc_encoder_cmd)      (struct file *file, void *fh,
+                                        struct v4l2_encoder_cmd *a);
+        int (*vidioc_try_encoder_cmd)  (struct file *file, void *fh,
+                                        struct v4l2_encoder_cmd *a);
+
+        /* Stream type-dependent parameter ioctls */
+        int (*vidioc_g_parm)           (struct file *file, void *fh,
+                                        struct v4l2_streamparm *a);
+        int (*vidioc_s_parm)           (struct file *file, void *fh,
+                                        struct v4l2_streamparm *a);
+
+        /* Tuner ioctls */
+        int (*vidioc_g_tuner)          (struct file *file, void *fh,
+                                        struct v4l2_tuner *a);
+        int (*vidioc_s_tuner)          (struct file *file, void *fh,
+                                        struct v4l2_tuner *a);
+        int (*vidioc_g_frequency)      (struct file *file, void *fh,
+                                        struct v4l2_frequency *a);
+        int (*vidioc_s_frequency)      (struct file *file, void *fh,
+                                        struct v4l2_frequency *a);
+
+        /* Sliced VBI cap */
+        int (*vidioc_g_sliced_vbi_cap) (struct file *file, void *fh,
+                                        struct v4l2_sliced_vbi_cap *a);
+
+        /* Log status ioctl */
+        int (*vidioc_log_status)       (struct file *file, void *fh);
+
+        int (*vidioc_s_hw_freq_seek)   (struct file *file, void *fh,
+                                        struct v4l2_hw_freq_seek *a);
+
+        /* Debugging ioctls */
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+        int (*vidioc_g_register)       (struct file *file, void *fh,
+                                        struct v4l2_register *reg);
+        int (*vidioc_s_register)       (struct file *file, void *fh,
+                                        struct v4l2_register *reg);
+#endif
+        int (*vidioc_g_chip_ident)     (struct file *file, void *fh,
+                                        struct v4l2_chip_ident *chip);
+
+        /* For other private ioctls */
+        int (*vidioc_default)          (struct file *file, void *fh,
+                                        int cmd, void *arg);
+};
+
+
+/* v4l debugging and diagnostics */
+
+/* Debug bitmask flags to be used on V4L2 */
+#define V4L2_DEBUG_IOCTL     0x01
+#define V4L2_DEBUG_IOCTL_ARG 0x02
+
+/* Use this macro for non-I2C drivers. Pass the driver name as the first arg. */
+#define v4l_print_ioctl(name, cmd)               \
+        do {                                     \
+                printk(KERN_DEBUG "%s: ", name); \
+                v4l_printk_ioctl(cmd);           \
+        } while (0)
+
+/* Use this macro in I2C drivers where 'client' is the struct i2c_client
+   pointer */
+#define v4l_i2c_print_ioctl(client, cmd)                   \
+        do {                                               \
+                v4l_client_printk(KERN_DEBUG, client, ""); \
+                v4l_printk_ioctl(cmd);                     \
+        } while (0)
+
+/*  Video standard functions  */
+extern const char *v4l2_norm_to_name(v4l2_std_id id);
+extern int v4l2_video_std_construct(struct v4l2_standard *vs,
+                                    int id, const char *name);
+/* Prints the ioctl in a human-readable format */
+extern void v4l_printk_ioctl(unsigned int cmd);
+
+/* names for fancy debug output */
+extern const char *v4l2_field_names[];
+extern const char *v4l2_type_names[];
+
+/*  Compatibility layer interface  --  v4l1-compat module */
+typedef int (*v4l2_kioctl)(struct inode *inode, struct file *file,
+                           unsigned int cmd, void *arg);
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
+int v4l_compat_translate_ioctl(struct inode *inode, struct file *file,
+                               int cmd, void *arg, v4l2_kioctl driver_ioctl);
+#else
+#define v4l_compat_translate_ioctl(inode, file, cmd, arg, ioctl) (-EINVAL)
+#endif
+
+/* 32 Bits compatibility layer for 64 bits processors */
+extern long v4l_compat_ioctl32(struct file *file, unsigned int cmd,
+                                unsigned long arg);
+
+extern int video_ioctl2(struct inode *inode, struct file *file,
+                          unsigned int cmd, unsigned long arg);
+
+/* Include support for obsoleted stuff */
+extern int video_usercopy(struct inode *inode, struct file *file,
+                          unsigned int cmd, unsigned long arg,
+                          int (*func)(struct inode *inode, struct file *file,
+                                      unsigned int cmd, void *arg));
+
+#endif /* _V4L2_IOCTL_H */
diff --git a/include/net/ip_vs.h b/include/net/ip_vs.h
index 9a51ebad3f1f..cbb59ebed4ae 100644
--- a/include/net/ip_vs.h
+++ b/include/net/ip_vs.h
@@ -3,254 +3,17 @@
  *      data structure and functionality definitions
  */
 
-#ifndef _IP_VS_H
-#define _IP_VS_H
-
-#include <asm/types.h>          /* For __uXX types */
-#include <linux/types.h>        /* For __beXX types in userland */
-
-#include <linux/sysctl.h>       /* For ctl_path */
-
-#define IP_VS_VERSION_CODE      0x010201
-#define NVERSION(version)                       \
-        (version >> 16) & 0xFF,                 \
-        (version >> 8) & 0xFF,                  \
-        version & 0xFF
-
-/*
- *      Virtual Service Flags
- */
-#define IP_VS_SVC_F_PERSISTENT  0x0001          /* persistent port */
-#define IP_VS_SVC_F_HASHED      0x0002          /* hashed entry */
-
-/*
- *      Destination Server Flags
- */
-#define IP_VS_DEST_F_AVAILABLE  0x0001          /* server is available */
-#define IP_VS_DEST_F_OVERLOAD   0x0002          /* server is overloaded */
-
-/*
- *      IPVS sync daemon states
- */
-#define IP_VS_STATE_NONE        0x0000          /* daemon is stopped */
-#define IP_VS_STATE_MASTER      0x0001          /* started as master */
-#define IP_VS_STATE_BACKUP      0x0002          /* started as backup */
-
-/*
- *      IPVS socket options
- */
-#define IP_VS_BASE_CTL          (64+1024+64)            /* base */
-
-#define IP_VS_SO_SET_NONE       IP_VS_BASE_CTL          /* just peek */
-#define IP_VS_SO_SET_INSERT     (IP_VS_BASE_CTL+1)
-#define IP_VS_SO_SET_ADD        (IP_VS_BASE_CTL+2)
-#define IP_VS_SO_SET_EDIT       (IP_VS_BASE_CTL+3)
-#define IP_VS_SO_SET_DEL        (IP_VS_BASE_CTL+4)
-#define IP_VS_SO_SET_FLUSH      (IP_VS_BASE_CTL+5)
-#define IP_VS_SO_SET_LIST       (IP_VS_BASE_CTL+6)
-#define IP_VS_SO_SET_ADDDEST    (IP_VS_BASE_CTL+7)
-#define IP_VS_SO_SET_DELDEST    (IP_VS_BASE_CTL+8)
-#define IP_VS_SO_SET_EDITDEST   (IP_VS_BASE_CTL+9)
-#define IP_VS_SO_SET_TIMEOUT    (IP_VS_BASE_CTL+10)
-#define IP_VS_SO_SET_STARTDAEMON (IP_VS_BASE_CTL+11)
-#define IP_VS_SO_SET_STOPDAEMON (IP_VS_BASE_CTL+12)
-#define IP_VS_SO_SET_RESTORE    (IP_VS_BASE_CTL+13)
-#define IP_VS_SO_SET_SAVE       (IP_VS_BASE_CTL+14)
-#define IP_VS_SO_SET_ZERO       (IP_VS_BASE_CTL+15)
-#define IP_VS_SO_SET_MAX        IP_VS_SO_SET_ZERO
-
-#define IP_VS_SO_GET_VERSION    IP_VS_BASE_CTL
-#define IP_VS_SO_GET_INFO       (IP_VS_BASE_CTL+1)
-#define IP_VS_SO_GET_SERVICES   (IP_VS_BASE_CTL+2)
-#define IP_VS_SO_GET_SERVICE    (IP_VS_BASE_CTL+3)
-#define IP_VS_SO_GET_DESTS      (IP_VS_BASE_CTL+4)
-#define IP_VS_SO_GET_DEST       (IP_VS_BASE_CTL+5)      /* not used now */
-#define IP_VS_SO_GET_TIMEOUT    (IP_VS_BASE_CTL+6)
-#define IP_VS_SO_GET_DAEMON     (IP_VS_BASE_CTL+7)
-#define IP_VS_SO_GET_MAX        IP_VS_SO_GET_DAEMON
-
-
-/*
- *      IPVS Connection Flags
- */
-#define IP_VS_CONN_F_FWD_MASK   0x0007          /* mask for the fwd methods */
-#define IP_VS_CONN_F_MASQ       0x0000          /* masquerading/NAT */
-#define IP_VS_CONN_F_LOCALNODE  0x0001          /* local node */
-#define IP_VS_CONN_F_TUNNEL     0x0002          /* tunneling */
-#define IP_VS_CONN_F_DROUTE     0x0003          /* direct routing */
-#define IP_VS_CONN_F_BYPASS     0x0004          /* cache bypass */
-#define IP_VS_CONN_F_SYNC       0x0020          /* entry created by sync */
-#define IP_VS_CONN_F_HASHED     0x0040          /* hashed entry */
-#define IP_VS_CONN_F_NOOUTPUT   0x0080          /* no output packets */
-#define IP_VS_CONN_F_INACTIVE   0x0100          /* not established */
-#define IP_VS_CONN_F_OUT_SEQ    0x0200          /* must do output seq adjust */
-#define IP_VS_CONN_F_IN_SEQ     0x0400          /* must do input seq adjust */
-#define IP_VS_CONN_F_SEQ_MASK   0x0600          /* in/out sequence mask */
-#define IP_VS_CONN_F_NO_CPORT   0x0800          /* no client port set yet */
-#define IP_VS_CONN_F_TEMPLATE   0x1000          /* template, not connection */
-
-/* Move it to better place one day, for now keep it unique */
-#define NFC_IPVS_PROPERTY       0x10000
-
-#define IP_VS_SCHEDNAME_MAXLEN  16
-#define IP_VS_IFNAME_MAXLEN     16
-
-
-/*
- *      The struct ip_vs_service_user and struct ip_vs_dest_user are
- *      used to set IPVS rules through setsockopt.
- */
-struct ip_vs_service_user {
-        /* virtual service addresses */
-        u_int16_t               protocol;
-        __be32                  addr;           /* virtual ip address */
-        __be16                  port;
-        u_int32_t               fwmark;         /* firwall mark of service */
-
-        /* virtual service options */
-        char                    sched_name[IP_VS_SCHEDNAME_MAXLEN];
-        unsigned                flags;          /* virtual service flags */
-        unsigned                timeout;        /* persistent timeout in sec */
-        __be32                  netmask;        /* persistent netmask */
-};
-
-
-struct ip_vs_dest_user {
-        /* destination server address */
-        __be32                  addr;
-        __be16                  port;
-
-        /* real server options */
-        unsigned                conn_flags;     /* connection flags */
-        int                     weight;         /* destination weight */
-
-        /* thresholds for active connections */
-        u_int32_t               u_threshold;    /* upper threshold */
-        u_int32_t               l_threshold;    /* lower threshold */
-};
-
-
-/*
- *      IPVS statistics object (for user space)
- */
-struct ip_vs_stats_user
-{
-        __u32                   conns;          /* connections scheduled */
-        __u32                   inpkts;         /* incoming packets */
-        __u32                   outpkts;        /* outgoing packets */
-        __u64                   inbytes;        /* incoming bytes */
-        __u64                   outbytes;       /* outgoing bytes */
-
-        __u32                   cps;            /* current connection rate */
-        __u32                   inpps;          /* current in packet rate */
-        __u32                   outpps;         /* current out packet rate */
-        __u32                   inbps;          /* current in byte rate */
-        __u32                   outbps;         /* current out byte rate */
-};
-
-
-/* The argument to IP_VS_SO_GET_INFO */
-struct ip_vs_getinfo {
-        /* version number */
-        unsigned int            version;
-
-        /* size of connection hash table */
-        unsigned int            size;
-
-        /* number of virtual services */
-        unsigned int            num_services;
-};
-
-
-/* The argument to IP_VS_SO_GET_SERVICE */
-struct ip_vs_service_entry {
-        /* which service: user fills in these */
-        u_int16_t               protocol;
-        __be32                  addr;           /* virtual address */
-        __be16                  port;
-        u_int32_t               fwmark;         /* firwall mark of service */
-
-        /* service options */
-        char                    sched_name[IP_VS_SCHEDNAME_MAXLEN];
-        unsigned                flags;          /* virtual service flags */
-        unsigned                timeout;        /* persistent timeout */
-        __be32                  netmask;        /* persistent netmask */
-
-        /* number of real servers */
-        unsigned int            num_dests;
-
-        /* statistics */
-        struct ip_vs_stats_user stats;
-};
-
-
-struct ip_vs_dest_entry {
-        __be32                  addr;           /* destination address */
-        __be16                  port;
-        unsigned                conn_flags;     /* connection flags */
-        int                     weight;         /* destination weight */
-
-        u_int32_t               u_threshold;    /* upper threshold */
-        u_int32_t               l_threshold;    /* lower threshold */
-
-        u_int32_t               activeconns;    /* active connections */
-        u_int32_t               inactconns;     /* inactive connections */
-        u_int32_t               persistconns;   /* persistent connections */
-
-        /* statistics */
-        struct ip_vs_stats_user stats;
-};
-
-
-/* The argument to IP_VS_SO_GET_DESTS */
-struct ip_vs_get_dests {
-        /* which service: user fills in these */
-        u_int16_t               protocol;
-        __be32                  addr;           /* virtual address */
-        __be16                  port;
-        u_int32_t               fwmark;         /* firwall mark of service */
-
-        /* number of real servers */
-        unsigned int            num_dests;
-
-        /* the real servers */
-        struct ip_vs_dest_entry entrytable[0];
-};
-
-
-/* The argument to IP_VS_SO_GET_SERVICES */
-struct ip_vs_get_services {
-        /* number of virtual services */
-        unsigned int            num_services;
-
-        /* service table */
-        struct ip_vs_service_entry entrytable[0];
-};
-
-
-/* The argument to IP_VS_SO_GET_TIMEOUT */
-struct ip_vs_timeout_user {
-        int                     tcp_timeout;
-        int                     tcp_fin_timeout;
-        int                     udp_timeout;
-};
-
-
-/* The argument to IP_VS_SO_GET_DAEMON */
-struct ip_vs_daemon_user {
-        /* sync daemon state (master/backup) */
-        int                     state;
-
-        /* multicast interface name */
-        char                    mcast_ifn[IP_VS_IFNAME_MAXLEN];
-
-        /* SyncID we belong to */
-        int                     syncid;
-};
+#ifndef _NET_IP_VS_H
+#define _NET_IP_VS_H
 
+#include <linux/ip_vs.h>                /* definitions shared with userland */
 
+/* old ipvsadm versions still include this file directly */
 #ifdef __KERNEL__
 
+#include <asm/types.h>                  /* for __uXX types */
+
+#include <linux/sysctl.h>               /* for ctl_path */
 #include <linux/list.h>                 /* for struct list_head */
 #include <linux/spinlock.h>             /* for struct rwlock_t */
 #include <asm/atomic.h>                 /* for struct atomic_t */
@@ -981,4 +744,4 @@ static inline __wsum ip_vs_check_diff2(__be16 old, __be16 new, __wsum oldsum)
 
 #endif /* __KERNEL__ */
 
-#endif  /* _IP_VS_H */
+#endif  /* _NET_IP_VS_H */
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 4dd3d93e1960..b52721008be8 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -206,8 +206,6 @@ struct ieee80211_bss_conf {
  * These flags are used with the @flags member of &ieee80211_tx_info.
  *
  * @IEEE80211_TX_CTL_REQ_TX_STATUS: request TX status callback for this frame.
- * @IEEE80211_TX_CTL_DO_NOT_ENCRYPT: send this frame without encryption;
- *      e.g., for EAPOL frame
  * @IEEE80211_TX_CTL_USE_RTS_CTS: use RTS-CTS before sending frame
  * @IEEE80211_TX_CTL_USE_CTS_PROTECT: use CTS protection for the frame (e.g.,
  *      for combined 802.11g / 802.11b networks)
@@ -220,7 +218,6 @@ struct ieee80211_bss_conf {
  * @IEEE80211_TX_CTL_SHORT_PREAMBLE: TBD
  * @IEEE80211_TX_CTL_LONG_RETRY_LIMIT: this frame should be send using the
  *      through set_retry_limit configured long retry value
- * @IEEE80211_TX_CTL_EAPOL_FRAME: internal to mac80211
  * @IEEE80211_TX_CTL_SEND_AFTER_DTIM: send this frame after DTIM beacon
  * @IEEE80211_TX_CTL_AMPDU: this frame should be sent as part of an A-MPDU
  * @IEEE80211_TX_CTL_OFDM_HT: this frame can be sent in HT OFDM rates. number
@@ -253,7 +250,6 @@ struct ieee80211_bss_conf {
  */
 enum mac80211_tx_control_flags {
         IEEE80211_TX_CTL_REQ_TX_STATUS          = BIT(0),
-        IEEE80211_TX_CTL_DO_NOT_ENCRYPT         = BIT(1),
         IEEE80211_TX_CTL_USE_RTS_CTS            = BIT(2),
         IEEE80211_TX_CTL_USE_CTS_PROTECT        = BIT(3),
         IEEE80211_TX_CTL_NO_ACK                 = BIT(4),
@@ -263,7 +259,6 @@ enum mac80211_tx_control_flags {
         IEEE80211_TX_CTL_FIRST_FRAGMENT         = BIT(8),
         IEEE80211_TX_CTL_SHORT_PREAMBLE         = BIT(9),
         IEEE80211_TX_CTL_LONG_RETRY_LIMIT       = BIT(10),
-        IEEE80211_TX_CTL_EAPOL_FRAME            = BIT(11),
         IEEE80211_TX_CTL_SEND_AFTER_DTIM        = BIT(12),
         IEEE80211_TX_CTL_AMPDU                  = BIT(13),
         IEEE80211_TX_CTL_OFDM_HT                = BIT(14),
@@ -323,7 +318,6 @@ struct ieee80211_tx_info {
                         struct ieee80211_vif *vif;
                         struct ieee80211_key_conf *hw_key;
                         unsigned long jiffies;
-                        int ifindex;
                         u16 aid;
                         s8 rts_cts_rate_idx, alt_retry_rate_idx;
                         u8 retry_limit;
@@ -746,7 +740,6 @@ enum ieee80211_tkip_key_type {
  *      Measurement, Channel Switch, Quieting, TPC
  */
 enum ieee80211_hw_flags {
-        IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE           = 1<<0,
         IEEE80211_HW_RX_INCLUDES_FCS                    = 1<<1,
         IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING        = 1<<2,
         IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE          = 1<<3,
diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h
index 3030fdc6981d..c1b26fcc0b5c 100644
--- a/include/sound/soc-dapm.h
+++ b/include/sound/soc-dapm.h
@@ -202,6 +202,9 @@ struct snd_soc_dapm_path;
 struct snd_soc_dapm_pin;
 struct snd_soc_dapm_route;
 
+int dapm_reg_event(struct snd_soc_dapm_widget *w,
+                   struct snd_kcontrol *kcontrol, int event);
+
 /* dapm controls */
 int snd_soc_dapm_put_volsw(struct snd_kcontrol *kcontrol,
         struct snd_ctl_elem_value *ucontrol);
diff --git a/init/Kconfig b/init/Kconfig
index 43d6989c275f..7e6dae1ae727 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -522,7 +522,7 @@ config CC_OPTIMIZE_FOR_SIZE
           Enabling this option will pass "-Os" instead of "-O2" to gcc
           resulting in a smaller kernel.
 
-          If unsure, say N.
+          If unsure, say Y.
 
 config SYSCTL
         bool
@@ -802,6 +802,10 @@ config PROC_PAGE_MONITOR
 
 endmenu         # General setup
 
+config HAVE_GENERIC_DMA_COHERENT
+        bool
+        default n
+
 config SLABINFO
         bool
         depends on PROC_FS
diff --git a/init/calibrate.c b/init/calibrate.c
index 7963e3fc51d9..a379c9061199 100644
--- a/init/calibrate.c
+++ b/init/calibrate.c
@@ -170,7 +170,7 @@ void __cpuinit calibrate_delay(void)
                                 loops_per_jiffy &= ~loopbit;
                 }
         }
-        printk(KERN_INFO "%lu.%02lu BogoMIPS (lpj=%lu)\n",
+        printk(KERN_CONT "%lu.%02lu BogoMIPS (lpj=%lu)\n",
                         loops_per_jiffy/(500000/HZ),
                         (loops_per_jiffy/(5000/HZ)) % 100, loops_per_jiffy);
 }
diff --git a/init/main.c b/init/main.c
index 20fdc9884b77..9c3b68b86ca0 100644
--- a/init/main.c
+++ b/init/main.c
@@ -635,10 +635,11 @@ asmlinkage void __init start_kernel(void)
 
 #ifdef CONFIG_BLK_DEV_INITRD
         if (initrd_start && !initrd_below_start_ok &&
-            page_to_pfn(virt_to_page(initrd_start)) < min_low_pfn) {
+            page_to_pfn(virt_to_page((void *)initrd_start)) < min_low_pfn) {
                 printk(KERN_CRIT "initrd overwritten (0x%08lx < 0x%08lx) - "
                     "disabling it.\n",
-                    page_to_pfn(virt_to_page(initrd_start)), min_low_pfn);
+                    page_to_pfn(virt_to_page((void *)initrd_start)),
+                    min_low_pfn);
                 initrd_start = 0;
         }
 #endif
diff --git a/kernel/Makefile b/kernel/Makefile
index 54f69837d35a..4e1d7df7c3e2 100644
--- a/kernel/Makefile
+++ b/kernel/Makefile
@@ -84,6 +84,7 @@ obj-$(CONFIG_TASK_DELAY_ACCT) += delayacct.o
 obj-$(CONFIG_TASKSTATS) += taskstats.o tsacct.o
 obj-$(CONFIG_MARKERS) += marker.o
 obj-$(CONFIG_LATENCYTOP) += latencytop.o
+obj-$(CONFIG_HAVE_GENERIC_DMA_COHERENT) += dma-coherent.o
 obj-$(CONFIG_FTRACE) += trace/
 obj-$(CONFIG_TRACING) += trace/
 obj-$(CONFIG_SMP) += sched_cpupri.o
diff --git a/kernel/audit.c b/kernel/audit.c
index e092f1c0ce30..4414e93d8750 100644
--- a/kernel/audit.c
+++ b/kernel/audit.c
@@ -707,12 +707,14 @@ static int audit_receive_msg(struct sk_buff *skb, struct nlmsghdr *nlh)
                 if (status_get->mask & AUDIT_STATUS_ENABLED) {
                         err = audit_set_enabled(status_get->enabled,
                                                 loginuid, sessionid, sid);
-                        if (err < 0) return err;
+                        if (err < 0)
+                                return err;
                 }
                 if (status_get->mask & AUDIT_STATUS_FAILURE) {
                         err = audit_set_failure(status_get->failure,
                                                 loginuid, sessionid, sid);
-                        if (err < 0) return err;
+                        if (err < 0)
+                                return err;
                 }
                 if (status_get->mask & AUDIT_STATUS_PID) {
                         int new_pid = status_get->pid;
@@ -725,9 +727,12 @@ static int audit_receive_msg(struct sk_buff *skb, struct nlmsghdr *nlh)
                         audit_pid = new_pid;
                         audit_nlk_pid = NETLINK_CB(skb).pid;
                 }
-                if (status_get->mask & AUDIT_STATUS_RATE_LIMIT)
+                if (status_get->mask & AUDIT_STATUS_RATE_LIMIT) {
                         err = audit_set_rate_limit(status_get->rate_limit,
                                                    loginuid, sessionid, sid);
+                        if (err < 0)
+                                return err;
+                }
                 if (status_get->mask & AUDIT_STATUS_BACKLOG_LIMIT)
                         err = audit_set_backlog_limit(status_get->backlog_limit,
                                                       loginuid, sessionid, sid);
@@ -1366,7 +1371,7 @@ int audit_string_contains_control(const char *string, size_t len)
 {
         const unsigned char *p;
         for (p = string; p < (const unsigned char *)string + len && *p; p++) {
-                if (*p == '"' || *p < 0x21 || *p > 0x7f)
+                if (*p == '"' || *p < 0x21 || *p > 0x7e)
                         return 1;
         }
         return 0;
diff --git a/kernel/auditfilter.c b/kernel/auditfilter.c
index 98c50cc671bb..b7d354e2b0ef 100644
--- a/kernel/auditfilter.c
+++ b/kernel/auditfilter.c
@@ -1022,8 +1022,11 @@ static void audit_update_watch(struct audit_parent *parent,
                         struct audit_buffer *ab;
                         ab = audit_log_start(NULL, GFP_KERNEL,
                                 AUDIT_CONFIG_CHANGE);
+                        audit_log_format(ab, "auid=%u ses=%u",
+                                audit_get_loginuid(current),
+                                audit_get_sessionid(current));
                         audit_log_format(ab,
-                                "op=updated rules specifying path=");
+                                " op=updated rules specifying path=");
                         audit_log_untrustedstring(ab, owatch->path);
                         audit_log_format(ab, " with dev=%u ino=%lu\n",
                                  dev, ino);
@@ -1058,7 +1061,10 @@ static void audit_remove_parent_watches(struct audit_parent *parent)
                                 struct audit_buffer *ab;
                                 ab = audit_log_start(NULL, GFP_KERNEL,
                                         AUDIT_CONFIG_CHANGE);
-                                audit_log_format(ab, "op=remove rule path=");
+                                audit_log_format(ab, "auid=%u ses=%u",
+                                        audit_get_loginuid(current),
+                                        audit_get_sessionid(current));
+                                audit_log_format(ab, " op=remove rule path=");
                                 audit_log_untrustedstring(ab, w->path);
                                 if (r->filterkey) {
                                         audit_log_format(ab, " key=");
diff --git a/kernel/auditsc.c b/kernel/auditsc.c
index 4699950e65bd..496c3dd37276 100644
--- a/kernel/auditsc.c
+++ b/kernel/auditsc.c
@@ -610,7 +610,7 @@ static int audit_filter_rules(struct task_struct *tsk,
                 if (!result)
                         return 0;
         }
-        if (rule->filterkey)
+        if (rule->filterkey && ctx)
                 ctx->filterkey = kstrdup(rule->filterkey, GFP_ATOMIC);
         switch (rule->action) {
         case AUDIT_NEVER:    *state = AUDIT_DISABLED;       break;
@@ -2375,7 +2375,7 @@ int __audit_signal_info(int sig, struct task_struct *t)
         struct audit_context *ctx = tsk->audit_context;
 
         if (audit_pid && t->tgid == audit_pid) {
-                if (sig == SIGTERM || sig == SIGHUP || sig == SIGUSR1) {
+                if (sig == SIGTERM || sig == SIGHUP || sig == SIGUSR1 || sig == SIGUSR2) {
                         audit_sig_pid = tsk->pid;
                         if (tsk->loginuid != -1)
                                 audit_sig_uid = tsk->loginuid;
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index 657f8f8d93a5..13932abde159 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -355,6 +355,17 @@ static struct css_set *find_existing_css_set(
         return NULL;
 }
 
+static void free_cg_links(struct list_head *tmp)
+{
+        struct cg_cgroup_link *link;
+        struct cg_cgroup_link *saved_link;
+
+        list_for_each_entry_safe(link, saved_link, tmp, cgrp_link_list) {
+                list_del(&link->cgrp_link_list);
+                kfree(link);
+        }
+}
+
 /*
  * allocate_cg_links() allocates "count" cg_cgroup_link structures
  * and chains them on tmp through their cgrp_link_list fields. Returns 0 on
@@ -363,17 +374,12 @@ static struct css_set *find_existing_css_set(
 static int allocate_cg_links(int count, struct list_head *tmp)
 {
         struct cg_cgroup_link *link;
-        struct cg_cgroup_link *saved_link;
         int i;
         INIT_LIST_HEAD(tmp);
         for (i = 0; i < count; i++) {
                 link = kmalloc(sizeof(*link), GFP_KERNEL);
                 if (!link) {
-                        list_for_each_entry_safe(link, saved_link, tmp,
-                                                 cgrp_link_list) {
-                                list_del(&link->cgrp_link_list);
-                                kfree(link);
-                        }
+                        free_cg_links(tmp);
                         return -ENOMEM;
                 }
                 list_add(&link->cgrp_link_list, tmp);
@@ -381,17 +387,6 @@ static int allocate_cg_links(int count, struct list_head *tmp)
         return 0;
 }
 
-static void free_cg_links(struct list_head *tmp)
-{
-        struct cg_cgroup_link *link;
-        struct cg_cgroup_link *saved_link;
-
-        list_for_each_entry_safe(link, saved_link, tmp, cgrp_link_list) {
-                list_del(&link->cgrp_link_list);
-                kfree(link);
-        }
-}
-
 /*
  * find_css_set() takes an existing cgroup group and a
  * cgroup object, and returns a css_set object that's
@@ -956,7 +951,6 @@ static int cgroup_get_sb(struct file_system_type *fs_type,
         struct super_block *sb;
         struct cgroupfs_root *root;
         struct list_head tmp_cg_links;
-        INIT_LIST_HEAD(&tmp_cg_links);
 
         /* First find the desired set of subsystems */
         ret = parse_cgroupfs_options(data, &opts);
@@ -1424,14 +1418,17 @@ static ssize_t cgroup_write_string(struct cgroup *cgrp, struct cftype *cft,
                 if (buffer == NULL)
                         return -ENOMEM;
         }
-        if (nbytes && copy_from_user(buffer, userbuf, nbytes))
-                return -EFAULT;
+        if (nbytes && copy_from_user(buffer, userbuf, nbytes)) {
+                retval = -EFAULT;
+                goto out;
+        }
 
         buffer[nbytes] = 0;     /* nul-terminate */
         strstrip(buffer);
         retval = cft->write_string(cgrp, cft, buffer);
         if (!retval)
                 retval = nbytes;
+out:
         if (buffer != local_buffer)
                 kfree(buffer);
         return retval;
@@ -2371,7 +2368,7 @@ static int cgroup_mkdir(struct inode *dir, struct dentry *dentry, int mode)
         return cgroup_create(c_parent, dentry, mode | S_IFDIR);
 }
 
-static inline int cgroup_has_css_refs(struct cgroup *cgrp)
+static int cgroup_has_css_refs(struct cgroup *cgrp)
 {
         /* Check the reference count on each subsystem. Since we
          * already established that there are no tasks in the
diff --git a/kernel/cpu.c b/kernel/cpu.c
index 10ba5f1004a5..e202a68d1cc1 100644
--- a/kernel/cpu.c
+++ b/kernel/cpu.c
@@ -216,7 +216,6 @@ static int __ref take_cpu_down(void *_param)
 static int __ref _cpu_down(unsigned int cpu, int tasks_frozen)
 {
         int err, nr_calls = 0;
-        struct task_struct *p;
         cpumask_t old_allowed, tmp;
         void *hcpu = (void *)(long)cpu;
         unsigned long mod = tasks_frozen ? CPU_TASKS_FROZEN : 0;
@@ -249,21 +248,18 @@ static int __ref _cpu_down(unsigned int cpu, int tasks_frozen)
         cpus_setall(tmp);
         cpu_clear(cpu, tmp);
         set_cpus_allowed_ptr(current, &tmp);
+        tmp = cpumask_of_cpu(cpu);
 
-        p = __stop_machine_run(take_cpu_down, &tcd_param, cpu);
-
-        if (IS_ERR(p) || cpu_online(cpu)) {
+        err = __stop_machine(take_cpu_down, &tcd_param, &tmp);
+        if (err) {
                 /* CPU didn't die: tell everyone.  Can't complain. */
                 if (raw_notifier_call_chain(&cpu_chain, CPU_DOWN_FAILED | mod,
                                             hcpu) == NOTIFY_BAD)
                         BUG();
 
-                if (IS_ERR(p)) {
-                        err = PTR_ERR(p);
-                        goto out_allowed;
-                }
-                goto out_thread;
+                goto out_allowed;
         }
+        BUG_ON(cpu_online(cpu));
 
         /* Wait for it to sleep (leaving idle task). */
         while (!idle_cpu(cpu))
@@ -279,8 +275,6 @@ static int __ref _cpu_down(unsigned int cpu, int tasks_frozen)
 
         check_for_tasks(cpu);
 
-out_thread:
-        err = kthread_stop(p);
 out_allowed:
         set_cpus_allowed_ptr(current, &old_allowed);
 out_release:
@@ -461,3 +455,28 @@ out:
 #endif /* CONFIG_PM_SLEEP_SMP */
 
 #endif /* CONFIG_SMP */
+
+/*
+ * cpu_bit_bitmap[] is a special, "compressed" data structure that
+ * represents all NR_CPUS bits binary values of 1<<nr.
+ *
+ * It is used by cpumask_of_cpu() to get a constant address to a CPU
+ * mask value that has a single bit set only.
+ */
+
+/* cpu_bit_bitmap[0] is empty - so we can back into it */
+#define MASK_DECLARE_1(x)       [x+1][0] = 1UL << (x)
+#define MASK_DECLARE_2(x)       MASK_DECLARE_1(x), MASK_DECLARE_1(x+1)
+#define MASK_DECLARE_4(x)       MASK_DECLARE_2(x), MASK_DECLARE_2(x+2)
+#define MASK_DECLARE_8(x)       MASK_DECLARE_4(x), MASK_DECLARE_4(x+4)
+
+const unsigned long cpu_bit_bitmap[BITS_PER_LONG+1][BITS_TO_LONGS(NR_CPUS)] = {
+
+        MASK_DECLARE_8(0),      MASK_DECLARE_8(8),
+        MASK_DECLARE_8(16),     MASK_DECLARE_8(24),
+#if BITS_PER_LONG > 32
+        MASK_DECLARE_8(32),     MASK_DECLARE_8(40),
+        MASK_DECLARE_8(48),     MASK_DECLARE_8(56),
+#endif
+};
+EXPORT_SYMBOL_GPL(cpu_bit_bitmap);
diff --git a/kernel/cpuset.c b/kernel/cpuset.c
index 91cf85b36dd5..d5ab79cf516d 100644
--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -54,7 +54,6 @@
 #include <asm/uaccess.h>
 #include <asm/atomic.h>
 #include <linux/mutex.h>
-#include <linux/kfifo.h>
 #include <linux/workqueue.h>
 #include <linux/cgroup.h>
 
@@ -486,13 +485,38 @@ static int cpusets_overlap(struct cpuset *a, struct cpuset *b)
 static void
 update_domain_attr(struct sched_domain_attr *dattr, struct cpuset *c)
 {
-        if (!dattr)
-                return;
         if (dattr->relax_domain_level < c->relax_domain_level)
                 dattr->relax_domain_level = c->relax_domain_level;
         return;
 }
 
+static void
+update_domain_attr_tree(struct sched_domain_attr *dattr, struct cpuset *c)
+{
+        LIST_HEAD(q);
+
+        list_add(&c->stack_list, &q);
+        while (!list_empty(&q)) {
+                struct cpuset *cp;
+                struct cgroup *cont;
+                struct cpuset *child;
+
+                cp = list_first_entry(&q, struct cpuset, stack_list);
+                list_del(q.next);
+
+                if (cpus_empty(cp->cpus_allowed))
+                        continue;
+
+                if (is_sched_load_balance(cp))
+                        update_domain_attr(dattr, cp);
+
+                list_for_each_entry(cont, &cp->css.cgroup->children, sibling) {
+                        child = cgroup_cs(cont);
+                        list_add_tail(&child->stack_list, &q);
+                }
+        }
+}
+
 /*
  * rebuild_sched_domains()
  *
@@ -532,7 +556,7 @@ update_domain_attr(struct sched_domain_attr *dattr, struct cpuset *c)
  * So the reverse nesting would risk an ABBA deadlock.
  *
  * The three key local variables below are:
- *    q  - a kfifo queue of cpuset pointers, used to implement a
+ *    q  - a linked-list queue of cpuset pointers, used to implement a
  *         top-down scan of all cpusets.  This scan loads a pointer
  *         to each cpuset marked is_sched_load_balance into the
  *         array 'csa'.  For our purposes, rebuilding the schedulers
@@ -567,7 +591,7 @@ update_domain_attr(struct sched_domain_attr *dattr, struct cpuset *c)
 
 void rebuild_sched_domains(void)
 {
-        struct kfifo *q;        /* queue of cpusets to be scanned */
+        LIST_HEAD(q);           /* queue of cpusets to be scanned*/
         struct cpuset *cp;      /* scans q */
         struct cpuset **csa;    /* array of all cpuset ptrs */
         int csn;                /* how many cpuset ptrs in csa so far */
@@ -577,7 +601,6 @@ void rebuild_sched_domains(void)
         int ndoms;              /* number of sched domains in result */
         int nslot;              /* next empty doms[] cpumask_t slot */
 
-        q = NULL;
         csa = NULL;
         doms = NULL;
         dattr = NULL;
@@ -591,35 +614,42 @@ void rebuild_sched_domains(void)
                 dattr = kmalloc(sizeof(struct sched_domain_attr), GFP_KERNEL);
                 if (dattr) {
                         *dattr = SD_ATTR_INIT;
-                        update_domain_attr(dattr, &top_cpuset);
+                        update_domain_attr_tree(dattr, &top_cpuset);
                 }
                 *doms = top_cpuset.cpus_allowed;
                 goto rebuild;
         }
 
-        q = kfifo_alloc(number_of_cpusets * sizeof(cp), GFP_KERNEL, NULL);
-        if (IS_ERR(q))
-                goto done;
         csa = kmalloc(number_of_cpusets * sizeof(cp), GFP_KERNEL);
         if (!csa)
                 goto done;
         csn = 0;
 
-        cp = &top_cpuset;
-        __kfifo_put(q, (void *)&cp, sizeof(cp));
-        while (__kfifo_get(q, (void *)&cp, sizeof(cp))) {
+        list_add(&top_cpuset.stack_list, &q);
+        while (!list_empty(&q)) {
                 struct cgroup *cont;
                 struct cpuset *child;   /* scans child cpusets of cp */
 
+                cp = list_first_entry(&q, struct cpuset, stack_list);
+                list_del(q.next);
+
                 if (cpus_empty(cp->cpus_allowed))
                         continue;
 
-                if (is_sched_load_balance(cp))
+                /*
+                 * All child cpusets contain a subset of the parent's cpus, so
+                 * just skip them, and then we call update_domain_attr_tree()
+                 * to calc relax_domain_level of the corresponding sched
+                 * domain.
+                 */
+                if (is_sched_load_balance(cp)) {
                         csa[csn++] = cp;
+                        continue;
+                }
 
                 list_for_each_entry(cont, &cp->css.cgroup->children, sibling) {
                         child = cgroup_cs(cont);
-                        __kfifo_put(q, (void *)&child, sizeof(cp));
+                        list_add_tail(&child->stack_list, &q);
                 }
         }
 
@@ -686,7 +716,7 @@ restart:
                                         cpus_or(*dp, *dp, b->cpus_allowed);
                                         b->pn = -1;
                                         if (dattr)
-                                                update_domain_attr(dattr
+                                                update_domain_attr_tree(dattr
                                                                    + nslot, b);
                                 }
                         }
@@ -702,8 +732,6 @@ rebuild:
         put_online_cpus();
 
 done:
-        if (q && !IS_ERR(q))
-                kfifo_free(q);
         kfree(csa);
         /* Don't kfree(doms) -- partition_sched_domains() does that. */
         /* Don't kfree(dattr) -- partition_sched_domains() does that. */
@@ -1833,24 +1861,21 @@ static void remove_tasks_in_empty_cpuset(struct cpuset *cs)
  */
 static void scan_for_empty_cpusets(const struct cpuset *root)
 {
+        LIST_HEAD(queue);
         struct cpuset *cp;      /* scans cpusets being updated */
         struct cpuset *child;   /* scans child cpusets of cp */
-        struct list_head queue;
         struct cgroup *cont;
         nodemask_t oldmems;
 
-        INIT_LIST_HEAD(&queue);
-
         list_add_tail((struct list_head *)&root->stack_list, &queue);
 
         while (!list_empty(&queue)) {
-                cp = container_of(queue.next, struct cpuset, stack_list);
+                cp = list_first_entry(&queue, struct cpuset, stack_list);
                 list_del(queue.next);
                 list_for_each_entry(cont, &cp->css.cgroup->children, sibling) {
                         child = cgroup_cs(cont);
                         list_add_tail(&child->stack_list, &queue);
                 }
-                cont = cp->css.cgroup;
 
                 /* Continue past cpusets with all cpus, mems online */
                 if (cpus_subset(cp->cpus_allowed, cpu_online_map) &&
diff --git a/kernel/dma-coherent.c b/kernel/dma-coherent.c
new file mode 100644
index 000000000000..7517115a8cce
--- /dev/null
+++ b/kernel/dma-coherent.c
@@ -0,0 +1,154 @@
+/*
+ * Coherent per-device memory handling.
+ * Borrowed from i386
+ */
+#include <linux/kernel.h>
+#include <linux/dma-mapping.h>
+
+struct dma_coherent_mem {
+        void            *virt_base;
+        u32             device_base;
+        int             size;
+        int             flags;
+        unsigned long   *bitmap;
+};
+
+int dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr,
+                                dma_addr_t device_addr, size_t size, int flags)
+{
+        void __iomem *mem_base = NULL;
+        int pages = size >> PAGE_SHIFT;
+        int bitmap_size = BITS_TO_LONGS(pages) * sizeof(long);
+
+        if ((flags & (DMA_MEMORY_MAP | DMA_MEMORY_IO)) == 0)
+                goto out;
+        if (!size)
+                goto out;
+        if (dev->dma_mem)
+                goto out;
+
+        /* FIXME: this routine just ignores DMA_MEMORY_INCLUDES_CHILDREN */
+
+        mem_base = ioremap(bus_addr, size);
+        if (!mem_base)
+                goto out;
+
+        dev->dma_mem = kzalloc(sizeof(struct dma_coherent_mem), GFP_KERNEL);
+        if (!dev->dma_mem)
+                goto out;
+        dev->dma_mem->bitmap = kzalloc(bitmap_size, GFP_KERNEL);
+        if (!dev->dma_mem->bitmap)
+                goto free1_out;
+
+        dev->dma_mem->virt_base = mem_base;
+        dev->dma_mem->device_base = device_addr;
+        dev->dma_mem->size = pages;
+        dev->dma_mem->flags = flags;
+
+        if (flags & DMA_MEMORY_MAP)
+                return DMA_MEMORY_MAP;
+
+        return DMA_MEMORY_IO;
+
+ free1_out:
+        kfree(dev->dma_mem);
+ out:
+        if (mem_base)
+                iounmap(mem_base);
+        return 0;
+}
+EXPORT_SYMBOL(dma_declare_coherent_memory);
+
+void dma_release_declared_memory(struct device *dev)
+{
+        struct dma_coherent_mem *mem = dev->dma_mem;
+
+        if (!mem)
+                return;
+        dev->dma_mem = NULL;
+        iounmap(mem->virt_base);
+        kfree(mem->bitmap);
+        kfree(mem);
+}
+EXPORT_SYMBOL(dma_release_declared_memory);
+
+void *dma_mark_declared_memory_occupied(struct device *dev,
+                                        dma_addr_t device_addr, size_t size)
+{
+        struct dma_coherent_mem *mem = dev->dma_mem;
+        int pos, err;
+        int pages = (size + (device_addr & ~PAGE_MASK) + PAGE_SIZE - 1);
+
+        pages >>= PAGE_SHIFT;
+
+        if (!mem)
+                return ERR_PTR(-EINVAL);
+
+        pos = (device_addr - mem->device_base) >> PAGE_SHIFT;
+        err = bitmap_allocate_region(mem->bitmap, pos, get_order(pages));
+        if (err != 0)
+                return ERR_PTR(err);
+        return mem->virt_base + (pos << PAGE_SHIFT);
+}
+EXPORT_SYMBOL(dma_mark_declared_memory_occupied);
+
+/**
+ * Try to allocate memory from the per-device coherent area.
+ *
+ * @dev:        device from which we allocate memory
+ * @size:       size of requested memory area
+ * @dma_handle: This will be filled with the correct dma handle
+ * @ret:        This pointer will be filled with the virtual address
+ *              to allocated area.
+ *
+ * This function should be only called from per-arch %dma_alloc_coherent()
+ * to support allocation from per-device coherent memory pools.
+ *
+ * Returns 0 if dma_alloc_coherent should continue with allocating from
+ * generic memory areas, or !0 if dma_alloc_coherent should return %ret.
+ */
+int dma_alloc_from_coherent(struct device *dev, ssize_t size,
+                                       dma_addr_t *dma_handle, void **ret)
+{
+        struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL;
+        int order = get_order(size);
+
+        if (mem) {
+                int page = bitmap_find_free_region(mem->bitmap, mem->size,
+                                                     order);
+                if (page >= 0) {
+                        *dma_handle = mem->device_base + (page << PAGE_SHIFT);
+                        *ret = mem->virt_base + (page << PAGE_SHIFT);
+                        memset(*ret, 0, size);
+                } else if (mem->flags & DMA_MEMORY_EXCLUSIVE)
+                        *ret = NULL;
+        }
+        return (mem != NULL);
+}
+
+/**
+ * Try to free the memory allocated from per-device coherent memory pool.
+ * @dev:        device from which the memory was allocated
+ * @order:      the order of pages allocated
+ * @vaddr:      virtual address of allocated pages
+ *
+ * This checks whether the memory was allocated from the per-device
+ * coherent memory pool and if so, releases that memory.
+ *
+ * Returns 1 if we correctly released the memory, or 0 if
+ * %dma_release_coherent() should proceed with releasing memory from
+ * generic pools.
+ */
+int dma_release_from_coherent(struct device *dev, int order, void *vaddr)
+{
+        struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL;
+
+        if (mem && vaddr >= mem->virt_base && vaddr <
+                   (mem->virt_base + (mem->size << PAGE_SHIFT))) {
+                int page = (vaddr - mem->virt_base) >> PAGE_SHIFT;
+
+                bitmap_release_region(mem->bitmap, page, order);
+                return 1;
+        }
+        return 0;
+}
diff --git a/kernel/fork.c b/kernel/fork.c
index 8214ba7c8bb1..7ce2ebe84796 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -27,6 +27,7 @@
 #include <linux/key.h>
 #include <linux/binfmts.h>
 #include <linux/mman.h>
+#include <linux/mmu_notifier.h>
 #include <linux/fs.h>
 #include <linux/nsproxy.h>
 #include <linux/capability.h>
@@ -414,6 +415,7 @@ static struct mm_struct * mm_init(struct mm_struct * mm, struct task_struct *p)
 
         if (likely(!mm_alloc_pgd(mm))) {
                 mm->def_flags = 0;
+                mmu_notifier_mm_init(mm);
                 return mm;
         }
 
@@ -446,6 +448,7 @@ void __mmdrop(struct mm_struct *mm)
         BUG_ON(mm == &init_mm);
         mm_free_pgd(mm);
         destroy_context(mm);
+        mmu_notifier_mm_destroy(mm);
         free_mm(mm);
 }
 EXPORT_SYMBOL_GPL(__mmdrop);
diff --git a/kernel/kgdb.c b/kernel/kgdb.c
index 3ec23c3ec97f..eaa21fc9ad1d 100644
--- a/kernel/kgdb.c
+++ b/kernel/kgdb.c
@@ -56,12 +56,14 @@
 
 static int kgdb_break_asap;
 
+#define KGDB_MAX_THREAD_QUERY 17
 struct kgdb_state {
         int                     ex_vector;
         int                     signo;
         int                     err_code;
         int                     cpu;
         int                     pass_exception;
+        unsigned long           thr_query;
         unsigned long           threadid;
         long                    kgdb_usethreadid;
         struct pt_regs          *linux_regs;
@@ -166,13 +168,6 @@ early_param("nokgdbroundup", opt_nokgdbroundup);
  * Weak aliases for breakpoint management,
  * can be overriden by architectures when needed:
  */
-int __weak kgdb_validate_break_address(unsigned long addr)
-{
-        char tmp_variable[BREAK_INSTR_SIZE];
-
-        return probe_kernel_read(tmp_variable, (char *)addr, BREAK_INSTR_SIZE);
-}
-
 int __weak kgdb_arch_set_breakpoint(unsigned long addr, char *saved_instr)
 {
         int err;
@@ -191,6 +186,25 @@ int __weak kgdb_arch_remove_breakpoint(unsigned long addr, char *bundle)
                                   (char *)bundle, BREAK_INSTR_SIZE);
 }
 
+int __weak kgdb_validate_break_address(unsigned long addr)
+{
+        char tmp_variable[BREAK_INSTR_SIZE];
+        int err;
+        /* Validate setting the breakpoint and then removing it.  In the
+         * remove fails, the kernel needs to emit a bad message because we
+         * are deep trouble not being able to put things back the way we
+         * found them.
+         */
+        err = kgdb_arch_set_breakpoint(addr, tmp_variable);
+        if (err)
+                return err;
+        err = kgdb_arch_remove_breakpoint(addr, tmp_variable);
+        if (err)
+                printk(KERN_ERR "KGDB: Critical breakpoint error, kernel "
+                   "memory destroyed at: %lx", addr);
+        return err;
+}
+
 unsigned long __weak kgdb_arch_pc(int exception, struct pt_regs *regs)
 {
         return instruction_pointer(regs);
@@ -433,9 +447,14 @@ int kgdb_hex2long(char **ptr, unsigned long *long_val)
 {
         int hex_val;
         int num = 0;
+        int negate = 0;
 
         *long_val = 0;
 
+        if (**ptr == '-') {
+                negate = 1;
+                (*ptr)++;
+        }
         while (**ptr) {
                 hex_val = hex(**ptr);
                 if (hex_val < 0)
@@ -446,6 +465,9 @@ int kgdb_hex2long(char **ptr, unsigned long *long_val)
                 (*ptr)++;
         }
 
+        if (negate)
+                *long_val = -*long_val;
+
         return num;
 }
 
@@ -515,10 +537,16 @@ static void int_to_threadref(unsigned char *id, int value)
 static struct task_struct *getthread(struct pt_regs *regs, int tid)
 {
         /*
-         * Non-positive TIDs are remapped idle tasks:
+         * Non-positive TIDs are remapped to the cpu shadow information
          */
-        if (tid <= 0)
-                return idle_task(-tid);
+        if (tid == 0 || tid == -1)
+                tid = -atomic_read(&kgdb_active) - 2;
+        if (tid < 0) {
+                if (kgdb_info[-tid - 2].task)
+                        return kgdb_info[-tid - 2].task;
+                else
+                        return idle_task(-tid - 2);
+        }
 
         /*
          * find_task_by_pid_ns() does not take the tasklist lock anymore
@@ -725,14 +753,15 @@ setundefined:
 }
 
 /*
- * Remap normal tasks to their real PID, idle tasks to -1 ... -NR_CPUs:
+ * Remap normal tasks to their real PID,
+ * CPU shadow threads are mapped to -CPU - 2
  */
 static inline int shadow_pid(int realpid)
 {
         if (realpid)
                 return realpid;
 
-        return -1-raw_smp_processor_id();
+        return -raw_smp_processor_id() - 2;
 }
 
 static char gdbmsgbuf[BUFMAX + 1];
@@ -826,7 +855,7 @@ static void gdb_cmd_getregs(struct kgdb_state *ks)
                 local_debuggerinfo = kgdb_info[ks->cpu].debuggerinfo;
         } else {
                 local_debuggerinfo = NULL;
-                for (i = 0; i < NR_CPUS; i++) {
+                for_each_online_cpu(i) {
                         /*
                          * Try to find the task on some other
                          * or possibly this node if we do not
@@ -960,10 +989,13 @@ static int gdb_cmd_reboot(struct kgdb_state *ks)
 /* Handle the 'q' query packets */
 static void gdb_cmd_query(struct kgdb_state *ks)
 {
-        struct task_struct *thread;
+        struct task_struct *g;
+        struct task_struct *p;
         unsigned char thref[8];
         char *ptr;
         int i;
+        int cpu;
+        int finished = 0;
 
         switch (remcom_in_buffer[1]) {
         case 's':
@@ -973,22 +1005,34 @@ static void gdb_cmd_query(struct kgdb_state *ks)
                         break;
                 }
 
-                if (remcom_in_buffer[1] == 'f')
-                        ks->threadid = 1;
-
+                i = 0;
                 remcom_out_buffer[0] = 'm';
                 ptr = remcom_out_buffer + 1;
-
-                for (i = 0; i < 17; ks->threadid++) {
-                        thread = getthread(ks->linux_regs, ks->threadid);
-                        if (thread) {
-                                int_to_threadref(thref, ks->threadid);
+                if (remcom_in_buffer[1] == 'f') {
+                        /* Each cpu is a shadow thread */
+                        for_each_online_cpu(cpu) {
+                                ks->thr_query = 0;
+                                int_to_threadref(thref, -cpu - 2);
                                 pack_threadid(ptr, thref);
                                 ptr += BUF_THREAD_ID_SIZE;
                                 *(ptr++) = ',';
                                 i++;
                         }
                 }
+
+                do_each_thread(g, p) {
+                        if (i >= ks->thr_query && !finished) {
+                                int_to_threadref(thref, p->pid);
+                                pack_threadid(ptr, thref);
+                                ptr += BUF_THREAD_ID_SIZE;
+                                *(ptr++) = ',';
+                                ks->thr_query++;
+                                if (ks->thr_query % KGDB_MAX_THREAD_QUERY == 0)
+                                        finished = 1;
+                        }
+                        i++;
+                } while_each_thread(g, p);
+
                 *(--ptr) = '\0';
                 break;
 
@@ -1011,15 +1055,15 @@ static void gdb_cmd_query(struct kgdb_state *ks)
                         error_packet(remcom_out_buffer, -EINVAL);
                         break;
                 }
-                if (ks->threadid > 0) {
+                if ((int)ks->threadid > 0) {
                         kgdb_mem2hex(getthread(ks->linux_regs,
                                         ks->threadid)->comm,
                                         remcom_out_buffer, 16);
                 } else {
                         static char tmpstr[23 + BUF_THREAD_ID_SIZE];
 
-                        sprintf(tmpstr, "Shadow task %d for pid 0",
-                                        (int)(-ks->threadid-1));
+                        sprintf(tmpstr, "shadowCPU%d",
+                                        (int)(-ks->threadid - 2));
                         kgdb_mem2hex(tmpstr, remcom_out_buffer, strlen(tmpstr));
                 }
                 break;
diff --git a/kernel/marker.c b/kernel/marker.c
index 971da5317903..7d1faecd7a51 100644
--- a/kernel/marker.c
+++ b/kernel/marker.c
@@ -126,6 +126,11 @@ void marker_probe_cb(const struct marker *mdata, void *call_private, ...)
                 struct marker_probe_closure *multi;
                 int i;
                 /*
+                 * Read mdata->ptype before mdata->multi.
+                 */
+                smp_rmb();
+                multi = mdata->multi;
+                /*
                  * multi points to an array, therefore accessing the array
                  * depends on reading multi. However, even in this case,
                  * we must insure that the pointer is read _before_ the array
@@ -133,7 +138,6 @@ void marker_probe_cb(const struct marker *mdata, void *call_private, ...)
                  * in the fast path, so put the explicit barrier here.
                  */
                 smp_read_barrier_depends();
-                multi = mdata->multi;
                 for (i = 0; multi[i].func; i++) {
                         va_start(args, call_private);
                         multi[i].func(multi[i].probe_private, call_private,
@@ -175,6 +179,11 @@ void marker_probe_cb_noarg(const struct marker *mdata, void *call_private, ...)
                 struct marker_probe_closure *multi;
                 int i;
                 /*
+                 * Read mdata->ptype before mdata->multi.
+                 */
+                smp_rmb();
+                multi = mdata->multi;
+                /*
                  * multi points to an array, therefore accessing the array
                  * depends on reading multi. However, even in this case,
                  * we must insure that the pointer is read _before_ the array
@@ -182,7 +191,6 @@ void marker_probe_cb_noarg(const struct marker *mdata, void *call_private, ...)
                  * in the fast path, so put the explicit barrier here.
                  */
                 smp_read_barrier_depends();
-                multi = mdata->multi;
                 for (i = 0; multi[i].func; i++)
                         multi[i].func(multi[i].probe_private, call_private,
                                 mdata->format, &args);
diff --git a/kernel/module.c b/kernel/module.c
index d8b5605132a0..61d212120df4 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -325,18 +325,6 @@ static unsigned long find_symbol(const char *name,
         return -ENOENT;
 }
 
-/* lookup symbol in given range of kernel_symbols */
-static const struct kernel_symbol *lookup_symbol(const char *name,
-        const struct kernel_symbol *start,
-        const struct kernel_symbol *stop)
-{
-        const struct kernel_symbol *ks = start;
-        for (; ks < stop; ks++)
-                if (strcmp(ks->name, name) == 0)
-                        return ks;
-        return NULL;
-}
-
 /* Search for module by name: must hold module_mutex. */
 static struct module *find_module(const char *name)
 {
@@ -690,7 +678,7 @@ static int try_stop_module(struct module *mod, int flags, int *forced)
         if (flags & O_NONBLOCK) {
                 struct stopref sref = { mod, flags, forced };
 
-                return stop_machine_run(__try_stop_module, &sref, NR_CPUS);
+                return stop_machine(__try_stop_module, &sref, NULL);
         } else {
                 /* We don't need to stop the machine for this. */
                 mod->state = MODULE_STATE_GOING;
@@ -1428,7 +1416,7 @@ static int __unlink_module(void *_mod)
 static void free_module(struct module *mod)
 {
         /* Delete from various lists */
-        stop_machine_run(__unlink_module, mod, NR_CPUS);
+        stop_machine(__unlink_module, mod, NULL);
         remove_notes_attrs(mod);
         remove_sect_attrs(mod);
         mod_kobject_remove(mod);
@@ -1703,6 +1691,19 @@ static void setup_modinfo(struct module *mod, Elf_Shdr *sechdrs,
 }
 
 #ifdef CONFIG_KALLSYMS
+
+/* lookup symbol in given range of kernel_symbols */
+static const struct kernel_symbol *lookup_symbol(const char *name,
+        const struct kernel_symbol *start,
+        const struct kernel_symbol *stop)
+{
+        const struct kernel_symbol *ks = start;
+        for (; ks < stop; ks++)
+                if (strcmp(ks->name, name) == 0)
+                        return ks;
+        return NULL;
+}
+
 static int is_exported(const char *name, const struct module *mod)
 {
         if (!mod && lookup_symbol(name, __start___ksymtab, __stop___ksymtab))
@@ -2196,7 +2197,7 @@ static struct module *load_module(void __user *umod,
         /* Now sew it into the lists so we can get lockdep and oops
          * info during argument parsing.  Noone should access us, since
          * strong_try_module_get() will fail. */
-        stop_machine_run(__link_module, mod, NR_CPUS);
+        stop_machine(__link_module, mod, NULL);
 
         /* Size of section 0 is 0, so this works well if no params */
         err = parse_args(mod->name, mod->args,
@@ -2230,7 +2231,7 @@ static struct module *load_module(void __user *umod,
         return mod;
 
  unlink:
-        stop_machine_run(__unlink_module, mod, NR_CPUS);
+        stop_machine(__unlink_module, mod, NULL);
         module_arch_cleanup(mod);
  cleanup:
         kobject_del(&mod->mkobj.kobj);
diff --git a/kernel/printk.c b/kernel/printk.c
index a7f7559c5f6c..b51b1567bb55 100644
--- a/kernel/printk.c
+++ b/kernel/printk.c
@@ -1309,14 +1309,14 @@ void tty_write_message(struct tty_struct *tty, char *msg)
 
 #if defined CONFIG_PRINTK
 
-DEFINE_RATELIMIT_STATE(printk_ratelimit_state, 5 * HZ, 10);
 /*
  * printk rate limiting, lifted from the networking subsystem.
  *
- * This enforces a rate limit: not more than one kernel message
- * every printk_ratelimit_jiffies to make a denial-of-service
- * attack impossible.
+ * This enforces a rate limit: not more than 10 kernel messages
+ * every 5s to make a denial-of-service attack impossible.
  */
+DEFINE_RATELIMIT_STATE(printk_ratelimit_state, 5 * HZ, 10);
+
 int printk_ratelimit(void)
 {
         return __ratelimit(&printk_ratelimit_state);
diff --git a/kernel/rcuclassic.c b/kernel/rcuclassic.c
index 6f8696c502f4..aad93cdc9f68 100644
--- a/kernel/rcuclassic.c
+++ b/kernel/rcuclassic.c
@@ -91,8 +91,8 @@ static void force_quiescent_state(struct rcu_data *rdp,
                  * rdp->cpu is the current cpu.
                  *
                  * cpu_online_map is updated by the _cpu_down()
-                 * using stop_machine_run(). Since we're in irqs disabled
-                 * section, stop_machine_run() is not exectuting, hence
+                 * using __stop_machine(). Since we're in irqs disabled
+                 * section, __stop_machine() is not exectuting, hence
                  * the cpu_online_map is stable.
                  *
                  * However,  a cpu might have been offlined _just_ before
diff --git a/kernel/resource.c b/kernel/resource.c
index 74af2d7cb5a1..f5b518eabefe 100644
--- a/kernel/resource.c
+++ b/kernel/resource.c
@@ -490,7 +490,7 @@ resource_size_t resource_alignment(struct resource *res)
 {
         switch (res->flags & (IORESOURCE_SIZEALIGN | IORESOURCE_STARTALIGN)) {
         case IORESOURCE_SIZEALIGN:
-                return res->end - res->start + 1;
+                return resource_size(res);
         case IORESOURCE_STARTALIGN:
                 return res->start;
         default:
diff --git a/kernel/sched.c b/kernel/sched.c
index 0236958addcb..21f7da94662e 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -7671,34 +7671,34 @@ static ssize_t sched_power_savings_store(const char *buf, size_t count, int smt)
 }
 
 #ifdef CONFIG_SCHED_MC
-static ssize_t sched_mc_power_savings_show(struct sys_device *dev,
-                                struct sysdev_attribute *attr, char *page)
+static ssize_t sched_mc_power_savings_show(struct sysdev_class *class,
+                                           char *page)
 {
         return sprintf(page, "%u\n", sched_mc_power_savings);
 }
-static ssize_t sched_mc_power_savings_store(struct sys_device *dev,
-                                            struct sysdev_attribute *attr,
+static ssize_t sched_mc_power_savings_store(struct sysdev_class *class,
                                             const char *buf, size_t count)
 {
         return sched_power_savings_store(buf, count, 0);
 }
-static SYSDEV_ATTR(sched_mc_power_savings, 0644, sched_mc_power_savings_show,
-                   sched_mc_power_savings_store);
+static SYSDEV_CLASS_ATTR(sched_mc_power_savings, 0644,
+                         sched_mc_power_savings_show,
+                         sched_mc_power_savings_store);
 #endif
 
 #ifdef CONFIG_SCHED_SMT
-static ssize_t sched_smt_power_savings_show(struct sys_device *dev,
-                                struct sysdev_attribute *attr, char *page)
+static ssize_t sched_smt_power_savings_show(struct sysdev_class *dev,
+                                            char *page)
 {
         return sprintf(page, "%u\n", sched_smt_power_savings);
 }
-static ssize_t sched_smt_power_savings_store(struct sys_device *dev,
-                                             struct sysdev_attribute *attr,
+static ssize_t sched_smt_power_savings_store(struct sysdev_class *dev,
                                              const char *buf, size_t count)
 {
         return sched_power_savings_store(buf, count, 1);
 }
-static SYSDEV_ATTR(sched_smt_power_savings, 0644, sched_smt_power_savings_show,
+static SYSDEV_CLASS_ATTR(sched_smt_power_savings, 0644,
+                   sched_smt_power_savings_show,
                    sched_smt_power_savings_store);
 #endif
 
diff --git a/kernel/stop_machine.c b/kernel/stop_machine.c
index 738b411ff2d3..e446c7c7d6a9 100644
--- a/kernel/stop_machine.c
+++ b/kernel/stop_machine.c
@@ -1,4 +1,4 @@
-/* Copyright 2005 Rusty Russell rusty@rustcorp.com.au IBM Corporation.
+/* Copyright 2008, 2005 Rusty Russell rusty@rustcorp.com.au IBM Corporation.
  * GPL v2 and any later version.
  */
 #include <linux/cpu.h>
@@ -13,204 +13,178 @@
 #include <asm/atomic.h>
 #include <asm/uaccess.h>
 
-/* Since we effect priority and affinity (both of which are visible
- * to, and settable by outside processes) we do indirection via a
- * kthread. */
-
-/* Thread to stop each CPU in user context. */
+/* This controls the threads on each CPU. */
 enum stopmachine_state {
-        STOPMACHINE_WAIT,
+        /* Dummy starting state for thread. */
+        STOPMACHINE_NONE,
+        /* Awaiting everyone to be scheduled. */
         STOPMACHINE_PREPARE,
+        /* Disable interrupts. */
         STOPMACHINE_DISABLE_IRQ,
+        /* Run the function */
+        STOPMACHINE_RUN,
+        /* Exit */
         STOPMACHINE_EXIT,
 };
+static enum stopmachine_state state;
 
-static enum stopmachine_state stopmachine_state;
-static unsigned int stopmachine_num_threads;
-static atomic_t stopmachine_thread_ack;
-
-static int stopmachine(void *cpu)
-{
-        int irqs_disabled = 0;
-        int prepared = 0;
-        cpumask_of_cpu_ptr(cpumask, (int)(long)cpu);
-
-        set_cpus_allowed_ptr(current, cpumask);
-
-        /* Ack: we are alive */
-        smp_mb(); /* Theoretically the ack = 0 might not be on this CPU yet. */
-        atomic_inc(&stopmachine_thread_ack);
-
-        /* Simple state machine */
-        while (stopmachine_state != STOPMACHINE_EXIT) {
-                if (stopmachine_state == STOPMACHINE_DISABLE_IRQ 
-                    && !irqs_disabled) {
-                        local_irq_disable();
-                        hard_irq_disable();
-                        irqs_disabled = 1;
-                        /* Ack: irqs disabled. */
-                        smp_mb(); /* Must read state first. */
-                        atomic_inc(&stopmachine_thread_ack);
-                } else if (stopmachine_state == STOPMACHINE_PREPARE
-                           && !prepared) {
-                        /* Everyone is in place, hold CPU. */
-                        preempt_disable();
-                        prepared = 1;
-                        smp_mb(); /* Must read state first. */
-                        atomic_inc(&stopmachine_thread_ack);
-                }
-                /* Yield in first stage: migration threads need to
-                 * help our sisters onto their CPUs. */
-                if (!prepared && !irqs_disabled)
-                        yield();
-                cpu_relax();
-        }
-
-        /* Ack: we are exiting. */
-        smp_mb(); /* Must read state first. */
-        atomic_inc(&stopmachine_thread_ack);
-
-        if (irqs_disabled)
-                local_irq_enable();
-        if (prepared)
-                preempt_enable();
+struct stop_machine_data {
+        int (*fn)(void *);
+        void *data;
+        int fnret;
+};
 
-        return 0;
-}
+/* Like num_online_cpus(), but hotplug cpu uses us, so we need this. */
+static unsigned int num_threads;
+static atomic_t thread_ack;
+static struct completion finished;
+static DEFINE_MUTEX(lock);
 
-/* Change the thread state */
-static void stopmachine_set_state(enum stopmachine_state state)
+static void set_state(enum stopmachine_state newstate)
 {
-        atomic_set(&stopmachine_thread_ack, 0);
+        /* Reset ack counter. */
+        atomic_set(&thread_ack, num_threads);
         smp_wmb();
-        stopmachine_state = state;
-        while (atomic_read(&stopmachine_thread_ack) != stopmachine_num_threads)
-                cpu_relax();
+        state = newstate;
 }
 
-static int stop_machine(void)
+/* Last one to ack a state moves to the next state. */
+static void ack_state(void)
 {
-        int i, ret = 0;
-
-        atomic_set(&stopmachine_thread_ack, 0);
-        stopmachine_num_threads = 0;
-        stopmachine_state = STOPMACHINE_WAIT;
-
-        for_each_online_cpu(i) {
-                if (i == raw_smp_processor_id())
-                        continue;
-                ret = kernel_thread(stopmachine, (void *)(long)i,CLONE_KERNEL);
-                if (ret < 0)
-                        break;
-                stopmachine_num_threads++;
-        }
-
-        /* Wait for them all to come to life. */
-        while (atomic_read(&stopmachine_thread_ack) != stopmachine_num_threads) {
-                yield();
-                cpu_relax();
+        if (atomic_dec_and_test(&thread_ack)) {
+                /* If we're the last one to ack the EXIT, we're finished. */
+                if (state == STOPMACHINE_EXIT)
+                        complete(&finished);
+                else
+                        set_state(state + 1);
         }
+}
 
-        /* If some failed, kill them all. */
-        if (ret < 0) {
-                stopmachine_set_state(STOPMACHINE_EXIT);
-                return ret;
-        }
+/* This is the actual thread which stops the CPU.  It exits by itself rather
+ * than waiting for kthread_stop(), because it's easier for hotplug CPU. */
+static int stop_cpu(struct stop_machine_data *smdata)
+{
+        enum stopmachine_state curstate = STOPMACHINE_NONE;
+        int uninitialized_var(ret);
 
-        /* Now they are all started, make them hold the CPUs, ready. */
-        preempt_disable();
-        stopmachine_set_state(STOPMACHINE_PREPARE);
+        /* Simple state machine */
+        do {
+                /* Chill out and ensure we re-read stopmachine_state. */
+                cpu_relax();
+                if (state != curstate) {
+                        curstate = state;
+                        switch (curstate) {
+                        case STOPMACHINE_DISABLE_IRQ:
+                                local_irq_disable();
+                                hard_irq_disable();
+                                break;
+                        case STOPMACHINE_RUN:
+                                /* |= allows error detection if functions on
+                                 * multiple CPUs. */
+                                smdata->fnret |= smdata->fn(smdata->data);
+                                break;
+                        default:
+                                break;
+                        }
+                        ack_state();
+                }
+        } while (curstate != STOPMACHINE_EXIT);
 
-        /* Make them disable irqs. */
-        local_irq_disable();
-        hard_irq_disable();
-        stopmachine_set_state(STOPMACHINE_DISABLE_IRQ);
+        local_irq_enable();
+        do_exit(0);
+}
 
+/* Callback for CPUs which aren't supposed to do anything. */
+static int chill(void *unused)
+{
         return 0;
 }
 
-static void restart_machine(void)
+int __stop_machine(int (*fn)(void *), void *data, const cpumask_t *cpus)
 {
-        stopmachine_set_state(STOPMACHINE_EXIT);
-        local_irq_enable();
-        preempt_enable_no_resched();
-}
+        int i, err;
+        struct stop_machine_data active, idle;
+        struct task_struct **threads;
+
+        active.fn = fn;
+        active.data = data;
+        active.fnret = 0;
+        idle.fn = chill;
+        idle.data = NULL;
+
+        /* This could be too big for stack on large machines. */
+        threads = kcalloc(NR_CPUS, sizeof(threads[0]), GFP_KERNEL);
+        if (!threads)
+                return -ENOMEM;
+
+        /* Set up initial state. */
+        mutex_lock(&lock);
+        init_completion(&finished);
+        num_threads = num_online_cpus();
+        set_state(STOPMACHINE_PREPARE);
 
-struct stop_machine_data {
-        int (*fn)(void *);
-        void *data;
-        struct completion done;
-};
+        for_each_online_cpu(i) {
+                struct stop_machine_data *smdata = &idle;
+                struct sched_param param = { .sched_priority = MAX_RT_PRIO-1 };
 
-static int do_stop(void *_smdata)
-{
-        struct stop_machine_data *smdata = _smdata;
-        int ret;
+                if (!cpus) {
+                        if (i == first_cpu(cpu_online_map))
+                                smdata = &active;
+                } else {
+                        if (cpu_isset(i, *cpus))
+                                smdata = &active;
+                }
 
-        ret = stop_machine();
-        if (ret == 0) {
-                ret = smdata->fn(smdata->data);
-                restart_machine();
-        }
+                threads[i] = kthread_create((void *)stop_cpu, smdata, "kstop%u",
+                                            i);
+                if (IS_ERR(threads[i])) {
+                        err = PTR_ERR(threads[i]);
+                        threads[i] = NULL;
+                        goto kill_threads;
+                }
 
-        /* We're done: you can kthread_stop us now */
-        complete(&smdata->done);
+                /* Place it onto correct cpu. */
+                kthread_bind(threads[i], i);
 
-        /* Wait for kthread_stop */
-        set_current_state(TASK_INTERRUPTIBLE);
-        while (!kthread_should_stop()) {
-                schedule();
-                set_current_state(TASK_INTERRUPTIBLE);
+                /* Make it highest prio. */
+                if (sched_setscheduler_nocheck(threads[i], SCHED_FIFO, &param))
+                        BUG();
         }
-        __set_current_state(TASK_RUNNING);
-        return ret;
-}
 
-struct task_struct *__stop_machine_run(int (*fn)(void *), void *data,
-                                       unsigned int cpu)
-{
-        static DEFINE_MUTEX(stopmachine_mutex);
-        struct stop_machine_data smdata;
-        struct task_struct *p;
+        /* We've created all the threads.  Wake them all: hold this CPU so one
+         * doesn't hit this CPU until we're ready. */
+        get_cpu();
+        for_each_online_cpu(i)
+                wake_up_process(threads[i]);
 
-        smdata.fn = fn;
-        smdata.data = data;
-        init_completion(&smdata.done);
+        /* This will release the thread on our CPU. */
+        put_cpu();
+        wait_for_completion(&finished);
+        mutex_unlock(&lock);
 
-        mutex_lock(&stopmachine_mutex);
+        kfree(threads);
 
-        /* If they don't care which CPU fn runs on, bind to any online one. */
-        if (cpu == NR_CPUS)
-                cpu = raw_smp_processor_id();
+        return active.fnret;
 
-        p = kthread_create(do_stop, &smdata, "kstopmachine");
-        if (!IS_ERR(p)) {
-                struct sched_param param = { .sched_priority = MAX_RT_PRIO-1 };
+kill_threads:
+        for_each_online_cpu(i)
+                if (threads[i])
+                        kthread_stop(threads[i]);
+        mutex_unlock(&lock);
 
-                /* One high-prio thread per cpu.  We'll do this one. */
-                sched_setscheduler_nocheck(p, SCHED_FIFO, &param);
-                kthread_bind(p, cpu);
-                wake_up_process(p);
-                wait_for_completion(&smdata.done);
-        }
-        mutex_unlock(&stopmachine_mutex);
-        return p;
+        kfree(threads);
+        return err;
 }
 
-int stop_machine_run(int (*fn)(void *), void *data, unsigned int cpu)
+int stop_machine(int (*fn)(void *), void *data, const cpumask_t *cpus)
 {
-        struct task_struct *p;
         int ret;
 
         /* No CPUs can come up or down during this. */
         get_online_cpus();
-        p = __stop_machine_run(fn, data, cpu);
-        if (!IS_ERR(p))
-                ret = kthread_stop(p);
-        else
-                ret = PTR_ERR(p);
+        ret = __stop_machine(fn, data, cpus);
         put_online_cpus();
 
         return ret;
 }
-EXPORT_SYMBOL_GPL(stop_machine_run);
+EXPORT_SYMBOL_GPL(stop_machine);
diff --git a/kernel/time/tick-common.c b/kernel/time/tick-common.c
index bf43284d6855..80c4336f4188 100644
--- a/kernel/time/tick-common.c
+++ b/kernel/time/tick-common.c
@@ -196,12 +196,10 @@ static int tick_check_new_device(struct clock_event_device *newdev)
         struct tick_device *td;
         int cpu, ret = NOTIFY_OK;
         unsigned long flags;
-        cpumask_of_cpu_ptr_declare(cpumask);
 
         spin_lock_irqsave(&tick_device_lock, flags);
 
         cpu = smp_processor_id();
-        cpumask_of_cpu_ptr_next(cpumask, cpu);
         if (!cpu_isset(cpu, newdev->cpumask))
                 goto out_bc;
 
@@ -209,7 +207,7 @@ static int tick_check_new_device(struct clock_event_device *newdev)
         curdev = td->evtdev;
 
         /* cpu local device ? */
-        if (!cpus_equal(newdev->cpumask, *cpumask)) {
+        if (!cpus_equal(newdev->cpumask, cpumask_of_cpu(cpu))) {
 
                 /*
                  * If the cpu affinity of the device interrupt can not
@@ -222,7 +220,7 @@ static int tick_check_new_device(struct clock_event_device *newdev)
                  * If we have a cpu local device already, do not replace it
                  * by a non cpu local device
                  */
-                if (curdev && cpus_equal(curdev->cpumask, *cpumask))
+                if (curdev && cpus_equal(curdev->cpumask, cpumask_of_cpu(cpu)))
                         goto out_bc;
         }
 
@@ -254,7 +252,7 @@ static int tick_check_new_device(struct clock_event_device *newdev)
                 curdev = NULL;
         }
         clockevents_exchange_device(curdev, newdev);
-        tick_setup_device(td, newdev, cpu, cpumask);
+        tick_setup_device(td, newdev, cpu, &cpumask_of_cpu(cpu));
         if (newdev->features & CLOCK_EVT_FEAT_ONESHOT)
                 tick_oneshot_notify();
 
diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index 4231a3dc224a..f6e3af31b403 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -587,7 +587,7 @@ static int __ftrace_modify_code(void *data)
 
 static void ftrace_run_update_code(int command)
 {
-        stop_machine_run(__ftrace_modify_code, &command, NR_CPUS);
+        stop_machine(__ftrace_modify_code, &command, NULL);
 }
 
 void ftrace_disable_daemon(void)
@@ -787,7 +787,7 @@ static int ftrace_update_code(void)
             !ftrace_enabled || !ftraced_trigger)
                 return 0;
 
-        stop_machine_run(__ftrace_update_code, NULL, NR_CPUS);
+        stop_machine(__ftrace_update_code, NULL, NULL);
 
         return 1;
 }
@@ -1564,7 +1564,7 @@ static int __init ftrace_dynamic_init(void)
 
         addr = (unsigned long)ftrace_record_ip;
 
-        stop_machine_run(ftrace_dyn_arch_init, &addr, NR_CPUS);
+        stop_machine(ftrace_dyn_arch_init, &addr, NULL);
 
         /* ftrace_dyn_arch_init places the return code in addr */
         if (addr) {
diff --git a/kernel/trace/trace_sysprof.c b/kernel/trace/trace_sysprof.c
index ce2d723c10e1..bb948e52ce20 100644
--- a/kernel/trace/trace_sysprof.c
+++ b/kernel/trace/trace_sysprof.c
@@ -213,9 +213,7 @@ static void start_stack_timers(void)
         int cpu;
 
         for_each_online_cpu(cpu) {
-                cpumask_of_cpu_ptr(new_mask, cpu);
-
-                set_cpus_allowed_ptr(current, new_mask);
+                set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
                 start_stack_timer(cpu);
         }
         set_cpus_allowed_ptr(current, &saved_mask);
diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index ec7e4f62aaff..4a26a1382df0 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -830,10 +830,21 @@ struct workqueue_struct *__create_workqueue_key(const char *name,
                 start_workqueue_thread(cwq, -1);
         } else {
                 cpu_maps_update_begin();
+                /*
+                 * We must place this wq on list even if the code below fails.
+                 * cpu_down(cpu) can remove cpu from cpu_populated_map before
+                 * destroy_workqueue() takes the lock, in that case we leak
+                 * cwq[cpu]->thread.
+                 */
                 spin_lock(&workqueue_lock);
                 list_add(&wq->list, &workqueues);
                 spin_unlock(&workqueue_lock);
-
+                /*
+                 * We must initialize cwqs for each possible cpu even if we
+                 * are going to call destroy_workqueue() finally. Otherwise
+                 * cpu_up() can hit the uninitialized cwq once we drop the
+                 * lock.
+                 */
                 for_each_possible_cpu(cpu) {
                         cwq = init_cpu_workqueue(wq, cpu);
                         if (err || !cpu_online(cpu))
diff --git a/lib/Kconfig.kgdb b/lib/Kconfig.kgdb
index 2cfd2721f7ed..9b5d1d7f2ef7 100644
--- a/lib/Kconfig.kgdb
+++ b/lib/Kconfig.kgdb
@@ -4,14 +4,17 @@ config HAVE_ARCH_KGDB
 
 menuconfig KGDB
         bool "KGDB: kernel debugging with remote gdb"
-        select FRAME_POINTER
         depends on HAVE_ARCH_KGDB
         depends on DEBUG_KERNEL && EXPERIMENTAL
         help
           If you say Y here, it will be possible to remotely debug the
-          kernel using gdb.  Documentation of kernel debugger is available
-          at http://kgdb.sourceforge.net as well as in DocBook form
-          in Documentation/DocBook/.  If unsure, say N.
+          kernel using gdb.  It is recommended but not required, that
+          you also turn on the kernel config option
+          CONFIG_FRAME_POINTER to aid in producing more reliable stack
+          backtraces in the external debugger.  Documentation of
+          kernel debugger is available at http://kgdb.sourceforge.net
+          as well as in DocBook form in Documentation/DocBook/.  If
+          unsure, say N.
 
 if KGDB
 
diff --git a/lib/random32.c b/lib/random32.c
index ca87d86992bd..217d5c4b666d 100644
--- a/lib/random32.c
+++ b/lib/random32.c
@@ -56,23 +56,12 @@ static u32 __random32(struct rnd_state *state)
         return (state->s1 ^ state->s2 ^ state->s3);
 }
 
-static void __set_random32(struct rnd_state *state, unsigned long s)
+/*
+ * Handle minimum values for seeds
+ */
+static inline u32 __seed(u32 x, u32 m)
 {
-        if (s == 0)
-                s = 1;      /* default seed is 1 */
-
-#define LCG(n) (69069 * n)
-        state->s1 = LCG(s);
-        state->s2 = LCG(state->s1);
-        state->s3 = LCG(state->s2);
-
-        /* "warm it up" */
-        __random32(state);
-        __random32(state);
-        __random32(state);
-        __random32(state);
-        __random32(state);
-        __random32(state);
+        return (x < m) ? x + m : x;
 }
 
 /**
@@ -107,7 +96,7 @@ void srandom32(u32 entropy)
          */
         for_each_possible_cpu (i) {
                 struct rnd_state *state = &per_cpu(net_rand_state, i);
-                __set_random32(state, state->s1 ^ entropy);
+                state->s1 = __seed(state->s1 ^ entropy, 1);
         }
 }
 EXPORT_SYMBOL(srandom32);
@@ -122,7 +111,19 @@ static int __init random32_init(void)
 
         for_each_possible_cpu(i) {
                 struct rnd_state *state = &per_cpu(net_rand_state,i);
-                __set_random32(state, i + jiffies);
+
+#define LCG(x)  ((x) * 69069)   /* super-duper LCG */
+                state->s1 = __seed(LCG(i + jiffies), 1);
+                state->s2 = __seed(LCG(state->s1), 7);
+                state->s3 = __seed(LCG(state->s2), 15);
+
+                /* "warm it up" */
+                __random32(state);
+                __random32(state);
+                __random32(state);
+                __random32(state);
+                __random32(state);
+                __random32(state);
         }
         return 0;
 }
@@ -135,13 +136,18 @@ core_initcall(random32_init);
 static int __init random32_reseed(void)
 {
         int i;
-        unsigned long seed;
 
         for_each_possible_cpu(i) {
                 struct rnd_state *state = &per_cpu(net_rand_state,i);
+                u32 seeds[3];
+
+                get_random_bytes(&seeds, sizeof(seeds));
+                state->s1 = __seed(seeds[0], 1);
+                state->s2 = __seed(seeds[1], 7);
+                state->s3 = __seed(seeds[2], 15);
 
-                get_random_bytes(&seed, sizeof(seed));
-                __set_random32(state, seed);
+                /* mix it in */
+                __random32(state);
         }
         return 0;
 }
diff --git a/lib/ratelimit.c b/lib/ratelimit.c
index 35136671b215..26187edcc7ea 100644
--- a/lib/ratelimit.c
+++ b/lib/ratelimit.c
@@ -15,7 +15,6 @@
 #include <linux/module.h>
 
 static DEFINE_SPINLOCK(ratelimit_lock);
-static unsigned long flags;
 
 /*
  * __ratelimit - rate limiting
@@ -26,6 +25,8 @@ static unsigned long flags;
  */
 int __ratelimit(struct ratelimit_state *rs)
 {
+        unsigned long flags;
+
         if (!rs->interval)
                 return 1;
 
diff --git a/lib/smp_processor_id.c b/lib/smp_processor_id.c
index c4381d9516f6..0f8fc22ed103 100644
--- a/lib/smp_processor_id.c
+++ b/lib/smp_processor_id.c
@@ -11,7 +11,6 @@ notrace unsigned int debug_smp_processor_id(void)
 {
         unsigned long preempt_count = preempt_count();
         int this_cpu = raw_smp_processor_id();
-        cpumask_of_cpu_ptr_declare(this_mask);
 
         if (likely(preempt_count))
                 goto out;
@@ -23,9 +22,7 @@ notrace unsigned int debug_smp_processor_id(void)
          * Kernel threads bound to a single CPU can safely use
          * smp_processor_id():
          */
-        cpumask_of_cpu_ptr_next(this_mask, this_cpu);
-
-        if (cpus_equal(current->cpus_allowed, *this_mask))
+        if (cpus_equal(current->cpus_allowed, cpumask_of_cpu(this_cpu)))
                 goto out;
 
         /*
diff --git a/mm/Kconfig b/mm/Kconfig
index efee5d379df4..446c6588c753 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -208,3 +208,6 @@ config NR_QUICK
 config VIRT_TO_BUS
         def_bool y
         depends on !ARCH_NO_VIRT_TO_BUS
+
+config MMU_NOTIFIER
+        bool
diff --git a/mm/Makefile b/mm/Makefile
index 06ca2381fef1..da4ccf015aea 100644
--- a/mm/Makefile
+++ b/mm/Makefile
@@ -25,6 +25,7 @@ obj-$(CONFIG_SHMEM) += shmem.o
 obj-$(CONFIG_TMPFS_POSIX_ACL) += shmem_acl.o
 obj-$(CONFIG_TINY_SHMEM) += tiny-shmem.o
 obj-$(CONFIG_SLOB) += slob.o
+obj-$(CONFIG_MMU_NOTIFIER) += mmu_notifier.o
 obj-$(CONFIG_SLAB) += slab.o
 obj-$(CONFIG_SLUB) += slub.o
 obj-$(CONFIG_MEMORY_HOTPLUG) += memory_hotplug.o
diff --git a/mm/filemap.c b/mm/filemap.c
index 5de7633e1dbe..d97d1ad55473 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -1023,8 +1023,17 @@ find_page:
                                         ra, filp, page,
                                         index, last_index - index);
                 }
-                if (!PageUptodate(page))
-                        goto page_not_up_to_date;
+                if (!PageUptodate(page)) {
+                        if (inode->i_blkbits == PAGE_CACHE_SHIFT ||
+                                        !mapping->a_ops->is_partially_uptodate)
+                                goto page_not_up_to_date;
+                        if (TestSetPageLocked(page))
+                                goto page_not_up_to_date;
+                        if (!mapping->a_ops->is_partially_uptodate(page,
+                                                                desc, offset))
+                                goto page_not_up_to_date_locked;
+                        unlock_page(page);
+                }
 page_ok:
                 /*
                  * i_size must be checked after we know the page is Uptodate.
@@ -1094,6 +1103,7 @@ page_not_up_to_date:
                 if (lock_page_killable(page))
                         goto readpage_eio;
 
+page_not_up_to_date_locked:
                 /* Did it get truncated before we got the lock? */
                 if (!page->mapping) {
                         unlock_page(page);
@@ -1869,7 +1879,7 @@ void iov_iter_advance(struct iov_iter *i, size_t bytes)
                  * The !iov->iov_len check ensures we skip over unlikely
                  * zero-length segments (without overruning the iovec).
                  */
-                while (bytes || unlikely(!iov->iov_len && i->count)) {
+                while (bytes || unlikely(i->count && !iov->iov_len)) {
                         int copy;
 
                         copy = min(bytes, iov->iov_len - base);
diff --git a/mm/filemap_xip.c b/mm/filemap_xip.c
index 98a3f31ccd6a..380ab402d711 100644
--- a/mm/filemap_xip.c
+++ b/mm/filemap_xip.c
@@ -13,6 +13,7 @@
 #include <linux/module.h>
 #include <linux/uio.h>
 #include <linux/rmap.h>
+#include <linux/mmu_notifier.h>
 #include <linux/sched.h>
 #include <asm/tlbflush.h>
 #include <asm/io.h>
@@ -188,7 +189,7 @@ __xip_unmap (struct address_space * mapping,
                 if (pte) {
                         /* Nuke the page table entry. */
                         flush_cache_page(vma, address, pte_pfn(*pte));
-                        pteval = ptep_clear_flush(vma, address, pte);
+                        pteval = ptep_clear_flush_notify(vma, address, pte);
                         page_remove_rmap(page, vma);
                         dec_mm_counter(mm, file_rss);
                         BUG_ON(pte_dirty(pteval));
diff --git a/mm/fremap.c b/mm/fremap.c
index 07a9c82ce1a3..7881638e4a12 100644
--- a/mm/fremap.c
+++ b/mm/fremap.c
@@ -15,6 +15,7 @@
 #include <linux/rmap.h>
 #include <linux/module.h>
 #include <linux/syscalls.h>
+#include <linux/mmu_notifier.h>
 
 #include <asm/mmu_context.h>
 #include <asm/cacheflush.h>
@@ -214,7 +215,9 @@ asmlinkage long sys_remap_file_pages(unsigned long start, unsigned long size,
                 spin_unlock(&mapping->i_mmap_lock);
         }
 
+        mmu_notifier_invalidate_range_start(mm, start, start + size);
         err = populate_range(mm, vma, start, size, pgoff);
+        mmu_notifier_invalidate_range_end(mm, start, start + size);
         if (!err && !(flags & MAP_NONBLOCK)) {
                 if (unlikely(has_write_lock)) {
                         downgrade_write(&mm->mmap_sem);
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index 3be79dc18c5c..d237a02eb228 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -9,6 +9,7 @@
 #include <linux/mm.h>
 #include <linux/sysctl.h>
 #include <linux/highmem.h>
+#include <linux/mmu_notifier.h>
 #include <linux/nodemask.h>
 #include <linux/pagemap.h>
 #include <linux/mempolicy.h>
@@ -16,9 +17,10 @@
 #include <linux/mutex.h>
 #include <linux/bootmem.h>
 #include <linux/sysfs.h>
-
+#include <asm/io.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
+#include <asm/io.h>
 
 #include <linux/hugetlb.h>
 #include "internal.h"
@@ -1672,6 +1674,7 @@ void __unmap_hugepage_range(struct vm_area_struct *vma, unsigned long start,
         BUG_ON(start & ~huge_page_mask(h));
         BUG_ON(end & ~huge_page_mask(h));
 
+        mmu_notifier_invalidate_range_start(mm, start, end);
         spin_lock(&mm->page_table_lock);
         for (address = start; address < end; address += sz) {
                 ptep = huge_pte_offset(mm, address);
@@ -1713,6 +1716,7 @@ void __unmap_hugepage_range(struct vm_area_struct *vma, unsigned long start,
         }
         spin_unlock(&mm->page_table_lock);
         flush_tlb_range(vma, start, end);
+        mmu_notifier_invalidate_range_end(mm, start, end);
         list_for_each_entry_safe(page, tmp, &page_list, lru) {
                 list_del(&page->lru);
                 put_page(page);
diff --git a/mm/madvise.c b/mm/madvise.c
index 23a0ec3e0ea0..f9349c18a1b5 100644
--- a/mm/madvise.c
+++ b/mm/madvise.c
@@ -132,10 +132,10 @@ static long madvise_willneed(struct vm_area_struct * vma,
  * Application no longer needs these pages.  If the pages are dirty,
  * it's OK to just throw them away.  The app will be more careful about
  * data it wants to keep.  Be sure to free swap resources too.  The
- * zap_page_range call sets things up for refill_inactive to actually free
+ * zap_page_range call sets things up for shrink_active_list to actually free
  * these pages later if no one else has touched them in the meantime,
  * although we could add these pages to a global reuse list for
- * refill_inactive to pick up before reclaiming other pages.
+ * shrink_active_list to pick up before reclaiming other pages.
  *
  * NB: This interface discards data rather than pushes it out to swap,
  * as some implementations do.  This has performance implications for
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index fba566c51322..7056c3bdb478 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -1168,9 +1168,6 @@ static void mem_cgroup_move_task(struct cgroup_subsys *ss,
         mem = mem_cgroup_from_cont(cont);
         old_mem = mem_cgroup_from_cont(old_cont);
 
-        if (mem == old_mem)
-                goto out;
-
         /*
          * Only thread group leaders are allowed to migrate, the mm_struct is
          * in effect owned by the leader
diff --git a/mm/memory.c b/mm/memory.c
index a8ca04faaea6..0e4eea10c7b0 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -51,6 +51,7 @@
 #include <linux/init.h>
 #include <linux/writeback.h>
 #include <linux/memcontrol.h>
+#include <linux/mmu_notifier.h>
 
 #include <asm/pgalloc.h>
 #include <asm/uaccess.h>
@@ -652,6 +653,7 @@ int copy_page_range(struct mm_struct *dst_mm, struct mm_struct *src_mm,
         unsigned long next;
         unsigned long addr = vma->vm_start;
         unsigned long end = vma->vm_end;
+        int ret;
 
         /*
          * Don't copy ptes where a page fault will fill them correctly.
@@ -667,17 +669,33 @@ int copy_page_range(struct mm_struct *dst_mm, struct mm_struct *src_mm,
         if (is_vm_hugetlb_page(vma))
                 return copy_hugetlb_page_range(dst_mm, src_mm, vma);
 
+        /*
+         * We need to invalidate the secondary MMU mappings only when
+         * there could be a permission downgrade on the ptes of the
+         * parent mm. And a permission downgrade will only happen if
+         * is_cow_mapping() returns true.
+         */
+        if (is_cow_mapping(vma->vm_flags))
+                mmu_notifier_invalidate_range_start(src_mm, addr, end);
+
+        ret = 0;
         dst_pgd = pgd_offset(dst_mm, addr);
         src_pgd = pgd_offset(src_mm, addr);
         do {
                 next = pgd_addr_end(addr, end);
                 if (pgd_none_or_clear_bad(src_pgd))
                         continue;
-                if (copy_pud_range(dst_mm, src_mm, dst_pgd, src_pgd,
-                                                vma, addr, next))
-                        return -ENOMEM;
+                if (unlikely(copy_pud_range(dst_mm, src_mm, dst_pgd, src_pgd,
+                                            vma, addr, next))) {
+                        ret = -ENOMEM;
+                        break;
+                }
         } while (dst_pgd++, src_pgd++, addr = next, addr != end);
-        return 0;
+
+        if (is_cow_mapping(vma->vm_flags))
+                mmu_notifier_invalidate_range_end(src_mm,
+                                                  vma->vm_start, end);
+        return ret;
 }
 
 static unsigned long zap_pte_range(struct mmu_gather *tlb,
@@ -881,7 +899,9 @@ unsigned long unmap_vmas(struct mmu_gather **tlbp,
         unsigned long start = start_addr;
         spinlock_t *i_mmap_lock = details? details->i_mmap_lock: NULL;
         int fullmm = (*tlbp)->fullmm;
+        struct mm_struct *mm = vma->vm_mm;
 
+        mmu_notifier_invalidate_range_start(mm, start_addr, end_addr);
         for ( ; vma && vma->vm_start < end_addr; vma = vma->vm_next) {
                 unsigned long end;
 
@@ -946,6 +966,7 @@ unsigned long unmap_vmas(struct mmu_gather **tlbp,
                 }
         }
 out:
+        mmu_notifier_invalidate_range_end(mm, start_addr, end_addr);
         return start;   /* which is now the end (or restart) address */
 }
 
@@ -972,6 +993,30 @@ unsigned long zap_page_range(struct vm_area_struct *vma, unsigned long address,
                 tlb_finish_mmu(tlb, address, end);
         return end;
 }
+EXPORT_SYMBOL_GPL(zap_page_range);
+
+/**
+ * zap_vma_ptes - remove ptes mapping the vma
+ * @vma: vm_area_struct holding ptes to be zapped
+ * @address: starting address of pages to zap
+ * @size: number of bytes to zap
+ *
+ * This function only unmaps ptes assigned to VM_PFNMAP vmas.
+ *
+ * The entire address range must be fully contained within the vma.
+ *
+ * Returns 0 if successful.
+ */
+int zap_vma_ptes(struct vm_area_struct *vma, unsigned long address,
+                unsigned long size)
+{
+        if (address < vma->vm_start || address + size > vma->vm_end ||
+                        !(vma->vm_flags & VM_PFNMAP))
+                return -1;
+        zap_page_range(vma, address, size, NULL);
+        return 0;
+}
+EXPORT_SYMBOL_GPL(zap_vma_ptes);
 
 /*
  * Do a quick page-table lookup for a single page.
@@ -1066,6 +1111,7 @@ no_page_table:
         }
         return page;
 }
+EXPORT_SYMBOL_GPL(follow_page);
 
 /* Can we do the FOLL_ANON optimization? */
 static inline int use_zero_page(struct vm_area_struct *vma)
@@ -1616,10 +1662,11 @@ int apply_to_page_range(struct mm_struct *mm, unsigned long addr,
 {
         pgd_t *pgd;
         unsigned long next;
-        unsigned long end = addr + size;
+        unsigned long start = addr, end = addr + size;
         int err;
 
         BUG_ON(addr >= end);
+        mmu_notifier_invalidate_range_start(mm, start, end);
         pgd = pgd_offset(mm, addr);
         do {
                 next = pgd_addr_end(addr, end);
@@ -1627,6 +1674,7 @@ int apply_to_page_range(struct mm_struct *mm, unsigned long addr,
                 if (err)
                         break;
         } while (pgd++, addr = next, addr != end);
+        mmu_notifier_invalidate_range_end(mm, start, end);
         return err;
 }
 EXPORT_SYMBOL_GPL(apply_to_page_range);
@@ -1839,7 +1887,7 @@ gotten:
                  * seen in the presence of one thread doing SMC and another
                  * thread doing COW.
                  */
-                ptep_clear_flush(vma, address, page_table);
+                ptep_clear_flush_notify(vma, address, page_table);
                 set_pte_at(mm, address, page_table, entry);
                 update_mmu_cache(vma, address, entry);
                 lru_cache_add_active(new_page);
diff --git a/mm/mmap.c b/mm/mmap.c
index 5e0cc99e9cd5..245c3d69067b 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -26,6 +26,7 @@
 #include <linux/mount.h>
 #include <linux/mempolicy.h>
 #include <linux/rmap.h>
+#include <linux/mmu_notifier.h>
 
 #include <asm/uaccess.h>
 #include <asm/cacheflush.h>
@@ -2061,6 +2062,7 @@ void exit_mmap(struct mm_struct *mm)
 
         /* mm's last user has gone, and its about to be pulled down */
         arch_exit_mmap(mm);
+        mmu_notifier_release(mm);
 
         lru_add_drain();
         flush_cache_mm(mm);
@@ -2268,3 +2270,161 @@ int install_special_mapping(struct mm_struct *mm,
 
         return 0;
 }
+
+static DEFINE_MUTEX(mm_all_locks_mutex);
+
+static void vm_lock_anon_vma(struct anon_vma *anon_vma)
+{
+        if (!test_bit(0, (unsigned long *) &anon_vma->head.next)) {
+                /*
+                 * The LSB of head.next can't change from under us
+                 * because we hold the mm_all_locks_mutex.
+                 */
+                spin_lock(&anon_vma->lock);
+                /*
+                 * We can safely modify head.next after taking the
+                 * anon_vma->lock. If some other vma in this mm shares
+                 * the same anon_vma we won't take it again.
+                 *
+                 * No need of atomic instructions here, head.next
+                 * can't change from under us thanks to the
+                 * anon_vma->lock.
+                 */
+                if (__test_and_set_bit(0, (unsigned long *)
+                                       &anon_vma->head.next))
+                        BUG();
+        }
+}
+
+static void vm_lock_mapping(struct address_space *mapping)
+{
+        if (!test_bit(AS_MM_ALL_LOCKS, &mapping->flags)) {
+                /*
+                 * AS_MM_ALL_LOCKS can't change from under us because
+                 * we hold the mm_all_locks_mutex.
+                 *
+                 * Operations on ->flags have to be atomic because
+                 * even if AS_MM_ALL_LOCKS is stable thanks to the
+                 * mm_all_locks_mutex, there may be other cpus
+                 * changing other bitflags in parallel to us.
+                 */
+                if (test_and_set_bit(AS_MM_ALL_LOCKS, &mapping->flags))
+                        BUG();
+                spin_lock(&mapping->i_mmap_lock);
+        }
+}
+
+/*
+ * This operation locks against the VM for all pte/vma/mm related
+ * operations that could ever happen on a certain mm. This includes
+ * vmtruncate, try_to_unmap, and all page faults.
+ *
+ * The caller must take the mmap_sem in write mode before calling
+ * mm_take_all_locks(). The caller isn't allowed to release the
+ * mmap_sem until mm_drop_all_locks() returns.
+ *
+ * mmap_sem in write mode is required in order to block all operations
+ * that could modify pagetables and free pages without need of
+ * altering the vma layout (for example populate_range() with
+ * nonlinear vmas). It's also needed in write mode to avoid new
+ * anon_vmas to be associated with existing vmas.
+ *
+ * A single task can't take more than one mm_take_all_locks() in a row
+ * or it would deadlock.
+ *
+ * The LSB in anon_vma->head.next and the AS_MM_ALL_LOCKS bitflag in
+ * mapping->flags avoid to take the same lock twice, if more than one
+ * vma in this mm is backed by the same anon_vma or address_space.
+ *
+ * We can take all the locks in random order because the VM code
+ * taking i_mmap_lock or anon_vma->lock outside the mmap_sem never
+ * takes more than one of them in a row. Secondly we're protected
+ * against a concurrent mm_take_all_locks() by the mm_all_locks_mutex.
+ *
+ * mm_take_all_locks() and mm_drop_all_locks are expensive operations
+ * that may have to take thousand of locks.
+ *
+ * mm_take_all_locks() can fail if it's interrupted by signals.
+ */
+int mm_take_all_locks(struct mm_struct *mm)
+{
+        struct vm_area_struct *vma;
+        int ret = -EINTR;
+
+        BUG_ON(down_read_trylock(&mm->mmap_sem));
+
+        mutex_lock(&mm_all_locks_mutex);
+
+        for (vma = mm->mmap; vma; vma = vma->vm_next) {
+                if (signal_pending(current))
+                        goto out_unlock;
+                if (vma->anon_vma)
+                        vm_lock_anon_vma(vma->anon_vma);
+                if (vma->vm_file && vma->vm_file->f_mapping)
+                        vm_lock_mapping(vma->vm_file->f_mapping);
+        }
+        ret = 0;
+
+out_unlock:
+        if (ret)
+                mm_drop_all_locks(mm);
+
+        return ret;
+}
+
+static void vm_unlock_anon_vma(struct anon_vma *anon_vma)
+{
+        if (test_bit(0, (unsigned long *) &anon_vma->head.next)) {
+                /*
+                 * The LSB of head.next can't change to 0 from under
+                 * us because we hold the mm_all_locks_mutex.
+                 *
+                 * We must however clear the bitflag before unlocking
+                 * the vma so the users using the anon_vma->head will
+                 * never see our bitflag.
+                 *
+                 * No need of atomic instructions here, head.next
+                 * can't change from under us until we release the
+                 * anon_vma->lock.
+                 */
+                if (!__test_and_clear_bit(0, (unsigned long *)
+                                          &anon_vma->head.next))
+                        BUG();
+                spin_unlock(&anon_vma->lock);
+        }
+}
+
+static void vm_unlock_mapping(struct address_space *mapping)
+{
+        if (test_bit(AS_MM_ALL_LOCKS, &mapping->flags)) {
+                /*
+                 * AS_MM_ALL_LOCKS can't change to 0 from under us
+                 * because we hold the mm_all_locks_mutex.
+                 */
+                spin_unlock(&mapping->i_mmap_lock);
+                if (!test_and_clear_bit(AS_MM_ALL_LOCKS,
+                                        &mapping->flags))
+                        BUG();
+        }
+}
+
+/*
+ * The mmap_sem cannot be released by the caller until
+ * mm_drop_all_locks() returns.
+ */
+void mm_drop_all_locks(struct mm_struct *mm)
+{
+        struct vm_area_struct *vma;
+
+        BUG_ON(down_read_trylock(&mm->mmap_sem));
+        BUG_ON(!mutex_is_locked(&mm_all_locks_mutex));
+
+        for (vma = mm->mmap; vma; vma = vma->vm_next) {
+                if (vma->anon_vma)
+                        vm_unlock_anon_vma(vma->anon_vma);
+                if (vma->vm_file && vma->vm_file->f_mapping)
+                        vm_unlock_mapping(vma->vm_file->f_mapping);
+        }
+
+        mutex_unlock(&mm_all_locks_mutex);
+}
diff --git a/mm/mmu_notifier.c b/mm/mmu_notifier.c
new file mode 100644
index 000000000000..5f4ef0250bee
--- /dev/null
+++ b/mm/mmu_notifier.c
@@ -0,0 +1,277 @@
+/*
+ *  linux/mm/mmu_notifier.c
+ *
+ *  Copyright (C) 2008  Qumranet, Inc.
+ *  Copyright (C) 2008  SGI
+ *             Christoph Lameter <clameter@sgi.com>
+ *
+ *  This work is licensed under the terms of the GNU GPL, version 2. See
+ *  the COPYING file in the top-level directory.
+ */
+
+#include <linux/rculist.h>
+#include <linux/mmu_notifier.h>
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/err.h>
+#include <linux/rcupdate.h>
+#include <linux/sched.h>
+
+/*
+ * This function can't run concurrently against mmu_notifier_register
+ * because mm->mm_users > 0 during mmu_notifier_register and exit_mmap
+ * runs with mm_users == 0. Other tasks may still invoke mmu notifiers
+ * in parallel despite there being no task using this mm any more,
+ * through the vmas outside of the exit_mmap context, such as with
+ * vmtruncate. This serializes against mmu_notifier_unregister with
+ * the mmu_notifier_mm->lock in addition to RCU and it serializes
+ * against the other mmu notifiers with RCU. struct mmu_notifier_mm
+ * can't go away from under us as exit_mmap holds an mm_count pin
+ * itself.
+ */
+void __mmu_notifier_release(struct mm_struct *mm)
+{
+        struct mmu_notifier *mn;
+
+        spin_lock(&mm->mmu_notifier_mm->lock);
+        while (unlikely(!hlist_empty(&mm->mmu_notifier_mm->list))) {
+                mn = hlist_entry(mm->mmu_notifier_mm->list.first,
+                                 struct mmu_notifier,
+                                 hlist);
+                /*
+                 * We arrived before mmu_notifier_unregister so
+                 * mmu_notifier_unregister will do nothing other than
+                 * to wait ->release to finish and
+                 * mmu_notifier_unregister to return.
+                 */
+                hlist_del_init_rcu(&mn->hlist);
+                /*
+                 * RCU here will block mmu_notifier_unregister until
+                 * ->release returns.
+                 */
+                rcu_read_lock();
+                spin_unlock(&mm->mmu_notifier_mm->lock);
+                /*
+                 * if ->release runs before mmu_notifier_unregister it
+                 * must be handled as it's the only way for the driver
+                 * to flush all existing sptes and stop the driver
+                 * from establishing any more sptes before all the
+                 * pages in the mm are freed.
+                 */
+                if (mn->ops->release)
+                        mn->ops->release(mn, mm);
+                rcu_read_unlock();
+                spin_lock(&mm->mmu_notifier_mm->lock);
+        }
+        spin_unlock(&mm->mmu_notifier_mm->lock);
+
+        /*
+         * synchronize_rcu here prevents mmu_notifier_release to
+         * return to exit_mmap (which would proceed freeing all pages
+         * in the mm) until the ->release method returns, if it was
+         * invoked by mmu_notifier_unregister.
+         *
+         * The mmu_notifier_mm can't go away from under us because one
+         * mm_count is hold by exit_mmap.
+         */
+        synchronize_rcu();
+}
+
+/*
+ * If no young bitflag is supported by the hardware, ->clear_flush_young can
+ * unmap the address and return 1 or 0 depending if the mapping previously
+ * existed or not.
+ */
+int __mmu_notifier_clear_flush_young(struct mm_struct *mm,
+                                        unsigned long address)
+{
+        struct mmu_notifier *mn;
+        struct hlist_node *n;
+        int young = 0;
+
+        rcu_read_lock();
+        hlist_for_each_entry_rcu(mn, n, &mm->mmu_notifier_mm->list, hlist) {
+                if (mn->ops->clear_flush_young)
+                        young |= mn->ops->clear_flush_young(mn, mm, address);
+        }
+        rcu_read_unlock();
+
+        return young;
+}
+
+void __mmu_notifier_invalidate_page(struct mm_struct *mm,
+                                          unsigned long address)
+{
+        struct mmu_notifier *mn;
+        struct hlist_node *n;
+
+        rcu_read_lock();
+        hlist_for_each_entry_rcu(mn, n, &mm->mmu_notifier_mm->list, hlist) {
+                if (mn->ops->invalidate_page)
+                        mn->ops->invalidate_page(mn, mm, address);
+        }
+        rcu_read_unlock();
+}
+
+void __mmu_notifier_invalidate_range_start(struct mm_struct *mm,
+                                  unsigned long start, unsigned long end)
+{
+        struct mmu_notifier *mn;
+        struct hlist_node *n;
+
+        rcu_read_lock();
+        hlist_for_each_entry_rcu(mn, n, &mm->mmu_notifier_mm->list, hlist) {
+                if (mn->ops->invalidate_range_start)
+                        mn->ops->invalidate_range_start(mn, mm, start, end);
+        }
+        rcu_read_unlock();
+}
+
+void __mmu_notifier_invalidate_range_end(struct mm_struct *mm,
+                                  unsigned long start, unsigned long end)
+{
+        struct mmu_notifier *mn;
+        struct hlist_node *n;
+
+        rcu_read_lock();
+        hlist_for_each_entry_rcu(mn, n, &mm->mmu_notifier_mm->list, hlist) {
+                if (mn->ops->invalidate_range_end)
+                        mn->ops->invalidate_range_end(mn, mm, start, end);
+        }
+        rcu_read_unlock();
+}
+
+static int do_mmu_notifier_register(struct mmu_notifier *mn,
+                                    struct mm_struct *mm,
+                                    int take_mmap_sem)
+{
+        struct mmu_notifier_mm *mmu_notifier_mm;
+        int ret;
+
+        BUG_ON(atomic_read(&mm->mm_users) <= 0);
+
+        ret = -ENOMEM;
+        mmu_notifier_mm = kmalloc(sizeof(struct mmu_notifier_mm), GFP_KERNEL);
+        if (unlikely(!mmu_notifier_mm))
+                goto out;
+
+        if (take_mmap_sem)
+                down_write(&mm->mmap_sem);
+        ret = mm_take_all_locks(mm);
+        if (unlikely(ret))
+                goto out_cleanup;
+
+        if (!mm_has_notifiers(mm)) {
+                INIT_HLIST_HEAD(&mmu_notifier_mm->list);
+                spin_lock_init(&mmu_notifier_mm->lock);
+                mm->mmu_notifier_mm = mmu_notifier_mm;
+                mmu_notifier_mm = NULL;
+        }
+        atomic_inc(&mm->mm_count);
+
+        /*
+         * Serialize the update against mmu_notifier_unregister. A
+         * side note: mmu_notifier_release can't run concurrently with
+         * us because we hold the mm_users pin (either implicitly as
+         * current->mm or explicitly with get_task_mm() or similar).
+         * We can't race against any other mmu notifier method either
+         * thanks to mm_take_all_locks().
+         */
+        spin_lock(&mm->mmu_notifier_mm->lock);
+        hlist_add_head(&mn->hlist, &mm->mmu_notifier_mm->list);
+        spin_unlock(&mm->mmu_notifier_mm->lock);
+
+        mm_drop_all_locks(mm);
+out_cleanup:
+        if (take_mmap_sem)
+                up_write(&mm->mmap_sem);
+        /* kfree() does nothing if mmu_notifier_mm is NULL */
+        kfree(mmu_notifier_mm);
+out:
+        BUG_ON(atomic_read(&mm->mm_users) <= 0);
+        return ret;
+}
+
+/*
+ * Must not hold mmap_sem nor any other VM related lock when calling
+ * this registration function. Must also ensure mm_users can't go down
+ * to zero while this runs to avoid races with mmu_notifier_release,
+ * so mm has to be current->mm or the mm should be pinned safely such
+ * as with get_task_mm(). If the mm is not current->mm, the mm_users
+ * pin should be released by calling mmput after mmu_notifier_register
+ * returns. mmu_notifier_unregister must be always called to
+ * unregister the notifier. mm_count is automatically pinned to allow
+ * mmu_notifier_unregister to safely run at any time later, before or
+ * after exit_mmap. ->release will always be called before exit_mmap
+ * frees the pages.
+ */
+int mmu_notifier_register(struct mmu_notifier *mn, struct mm_struct *mm)
+{
+        return do_mmu_notifier_register(mn, mm, 1);
+}
+EXPORT_SYMBOL_GPL(mmu_notifier_register);
+
+/*
+ * Same as mmu_notifier_register but here the caller must hold the
+ * mmap_sem in write mode.
+ */
+int __mmu_notifier_register(struct mmu_notifier *mn, struct mm_struct *mm)
+{
+        return do_mmu_notifier_register(mn, mm, 0);
+}
+EXPORT_SYMBOL_GPL(__mmu_notifier_register);
+
+/* this is called after the last mmu_notifier_unregister() returned */
+void __mmu_notifier_mm_destroy(struct mm_struct *mm)
+{
+        BUG_ON(!hlist_empty(&mm->mmu_notifier_mm->list));
+        kfree(mm->mmu_notifier_mm);
+        mm->mmu_notifier_mm = LIST_POISON1; /* debug */
+}
+
+/*
+ * This releases the mm_count pin automatically and frees the mm
+ * structure if it was the last user of it. It serializes against
+ * running mmu notifiers with RCU and against mmu_notifier_unregister
+ * with the unregister lock + RCU. All sptes must be dropped before
+ * calling mmu_notifier_unregister. ->release or any other notifier
+ * method may be invoked concurrently with mmu_notifier_unregister,
+ * and only after mmu_notifier_unregister returned we're guaranteed
+ * that ->release or any other method can't run anymore.
+ */
+void mmu_notifier_unregister(struct mmu_notifier *mn, struct mm_struct *mm)
+{
+        BUG_ON(atomic_read(&mm->mm_count) <= 0);
+
+        spin_lock(&mm->mmu_notifier_mm->lock);
+        if (!hlist_unhashed(&mn->hlist)) {
+                hlist_del_rcu(&mn->hlist);
+
+                /*
+                 * RCU here will force exit_mmap to wait ->release to finish
+                 * before freeing the pages.
+                 */
+                rcu_read_lock();
+                spin_unlock(&mm->mmu_notifier_mm->lock);
+                /*
+                 * exit_mmap will block in mmu_notifier_release to
+                 * guarantee ->release is called before freeing the
+                 * pages.
+                 */
+                if (mn->ops->release)
+                        mn->ops->release(mn, mm);
+                rcu_read_unlock();
+        } else
+                spin_unlock(&mm->mmu_notifier_mm->lock);
+
+        /*
+         * Wait any running method to finish, of course including
+         * ->release if it was run by mmu_notifier_relase instead of us.
+         */
+        synchronize_rcu();
+
+        BUG_ON(atomic_read(&mm->mm_count) <= 0);
+
+        mmdrop(mm);
+}
+EXPORT_SYMBOL_GPL(mmu_notifier_unregister);
diff --git a/mm/mprotect.c b/mm/mprotect.c
index abd645a3b0a0..fded06f923f4 100644
--- a/mm/mprotect.c
+++ b/mm/mprotect.c
@@ -21,6 +21,7 @@
 #include <linux/syscalls.h>
 #include <linux/swap.h>
 #include <linux/swapops.h>
+#include <linux/mmu_notifier.h>
 #include <asm/uaccess.h>
 #include <asm/pgtable.h>
 #include <asm/cacheflush.h>
@@ -203,10 +204,12 @@ success:
                 dirty_accountable = 1;
         }
 
+        mmu_notifier_invalidate_range_start(mm, start, end);
         if (is_vm_hugetlb_page(vma))
                 hugetlb_change_protection(vma, start, end, vma->vm_page_prot);
         else
                 change_protection(vma, start, end, vma->vm_page_prot, dirty_accountable);
+        mmu_notifier_invalidate_range_end(mm, start, end);
         vm_stat_account(mm, oldflags, vma->vm_file, -nrpages);
         vm_stat_account(mm, newflags, vma->vm_file, nrpages);
         return 0;
diff --git a/mm/mremap.c b/mm/mremap.c
index 08e3c7f2bd15..1a7743923c8c 100644
--- a/mm/mremap.c
+++ b/mm/mremap.c
@@ -18,6 +18,7 @@
 #include <linux/highmem.h>
 #include <linux/security.h>
 #include <linux/syscalls.h>
+#include <linux/mmu_notifier.h>
 
 #include <asm/uaccess.h>
 #include <asm/cacheflush.h>
@@ -74,7 +75,11 @@ static void move_ptes(struct vm_area_struct *vma, pmd_t *old_pmd,
         struct mm_struct *mm = vma->vm_mm;
         pte_t *old_pte, *new_pte, pte;
         spinlock_t *old_ptl, *new_ptl;
+        unsigned long old_start;
 
+        old_start = old_addr;
+        mmu_notifier_invalidate_range_start(vma->vm_mm,
+                                            old_start, old_end);
         if (vma->vm_file) {
                 /*
                  * Subtle point from Rajesh Venkatasubramanian: before
@@ -116,6 +121,7 @@ static void move_ptes(struct vm_area_struct *vma, pmd_t *old_pmd,
         pte_unmap_unlock(old_pte - 1, old_ptl);
         if (mapping)
                 spin_unlock(&mapping->i_mmap_lock);
+        mmu_notifier_invalidate_range_end(vma->vm_mm, old_start, old_end);
 }
 
 #define LATENCY_LIMIT   (64 * PAGE_SIZE)
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 6da667274df5..401d104d2bb6 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -2372,7 +2372,7 @@ static void build_zonelist_cache(pg_data_t *pgdat)
 
 #endif  /* CONFIG_NUMA */
 
-/* return values int ....just for stop_machine_run() */
+/* return values int ....just for stop_machine() */
 static int __build_all_zonelists(void *dummy)
 {
         int nid;
@@ -2397,7 +2397,7 @@ void build_all_zonelists(void)
         } else {
                 /* we have to stop all cpus to guarantee there is no user
                    of zonelist */
-                stop_machine_run(__build_all_zonelists, NULL, NR_CPUS);
+                stop_machine(__build_all_zonelists, NULL, NULL);
                 /* cpuset refresh routine should be here */
         }
         vm_total_pages = nr_free_pagecache_pages();
@@ -3753,23 +3753,6 @@ unsigned long __init find_min_pfn_with_active_regions(void)
         return find_min_pfn_for_node(MAX_NUMNODES);
 }
 
-/**
- * find_max_pfn_with_active_regions - Find the maximum PFN registered
- *
- * It returns the maximum PFN based on information provided via
- * add_active_range().
- */
-unsigned long __init find_max_pfn_with_active_regions(void)
-{
-        int i;
-        unsigned long max_pfn = 0;
-
-        for (i = 0; i < nr_nodemap_entries; i++)
-                max_pfn = max(max_pfn, early_node_map[i].end_pfn);
-
-        return max_pfn;
-}
-
 /*
  * early_calculate_totalpages()
  * Sum pages in active regions for movable zone.
diff --git a/mm/rmap.c b/mm/rmap.c
index 39ae5a9bf382..94a5246a3f98 100644
--- a/mm/rmap.c
+++ b/mm/rmap.c
@@ -49,6 +49,7 @@
 #include <linux/module.h>
 #include <linux/kallsyms.h>
 #include <linux/memcontrol.h>
+#include <linux/mmu_notifier.h>
 
 #include <asm/tlbflush.h>
 
@@ -287,7 +288,7 @@ static int page_referenced_one(struct page *page,
         if (vma->vm_flags & VM_LOCKED) {
                 referenced++;
                 *mapcount = 1;  /* break early from loop */
-        } else if (ptep_clear_flush_young(vma, address, pte))
+        } else if (ptep_clear_flush_young_notify(vma, address, pte))
                 referenced++;
 
         /* Pretend the page is referenced if the task has the
@@ -457,7 +458,7 @@ static int page_mkclean_one(struct page *page, struct vm_area_struct *vma)
                 pte_t entry;
 
                 flush_cache_page(vma, address, pte_pfn(*pte));
-                entry = ptep_clear_flush(vma, address, pte);
+                entry = ptep_clear_flush_notify(vma, address, pte);
                 entry = pte_wrprotect(entry);
                 entry = pte_mkclean(entry);
                 set_pte_at(mm, address, pte, entry);
@@ -666,7 +667,8 @@ void page_remove_rmap(struct page *page, struct vm_area_struct *vma)
                  * Leaving it set also helps swapoff to reinstate ptes
                  * faster for those pages still in swapcache.
                  */
-                if (page_test_dirty(page)) {
+                if ((!PageAnon(page) || PageSwapCache(page)) &&
+                    page_test_dirty(page)) {
                         page_clear_dirty(page);
                         set_page_dirty(page);
                 }
@@ -705,14 +707,14 @@ static int try_to_unmap_one(struct page *page, struct vm_area_struct *vma,
          * skipped over this mm) then we should reactivate it.
          */
         if (!migration && ((vma->vm_flags & VM_LOCKED) ||
-                        (ptep_clear_flush_young(vma, address, pte)))) {
+                        (ptep_clear_flush_young_notify(vma, address, pte)))) {
                 ret = SWAP_FAIL;
                 goto out_unmap;
         }
 
         /* Nuke the page table entry. */
         flush_cache_page(vma, address, page_to_pfn(page));
-        pteval = ptep_clear_flush(vma, address, pte);
+        pteval = ptep_clear_flush_notify(vma, address, pte);
 
         /* Move the dirty bit to the physical page now the pte is gone. */
         if (pte_dirty(pteval))
@@ -837,12 +839,12 @@ static void try_to_unmap_cluster(unsigned long cursor,
                 page = vm_normal_page(vma, address, *pte);
                 BUG_ON(!page || PageAnon(page));
 
-                if (ptep_clear_flush_young(vma, address, pte))
+                if (ptep_clear_flush_young_notify(vma, address, pte))
                         continue;
 
                 /* Nuke the page table entry. */
                 flush_cache_page(vma, address, pte_pfn(*pte));
-                pteval = ptep_clear_flush(vma, address, pte);
+                pteval = ptep_clear_flush_notify(vma, address, pte);
 
                 /* If nonlinear, store the file page offset in the pte. */
                 if (page->index != linear_page_index(vma, address))
diff --git a/mm/shmem.c b/mm/shmem.c
index 952d361774bb..c1e5a3b4f758 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -1513,7 +1513,6 @@ shmem_get_inode(struct super_block *sb, int mode, dev_t dev)
                 inode->i_uid = current->fsuid;
                 inode->i_gid = current->fsgid;
                 inode->i_blocks = 0;
-                inode->i_mapping->a_ops = &shmem_aops;
                 inode->i_mapping->backing_dev_info = &shmem_backing_dev_info;
                 inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME;
                 inode->i_generation = get_seconds();
@@ -1528,6 +1527,7 @@ shmem_get_inode(struct super_block *sb, int mode, dev_t dev)
                         init_special_inode(inode, mode, dev);
                         break;
                 case S_IFREG:
+                        inode->i_mapping->a_ops = &shmem_aops;
                         inode->i_op = &shmem_inode_operations;
                         inode->i_fop = &shmem_file_operations;
                         mpol_shared_policy_init(&info->policy,
@@ -1929,6 +1929,7 @@ static int shmem_symlink(struct inode *dir, struct dentry *dentry, const char *s
                         return error;
                 }
                 unlock_page(page);
+                inode->i_mapping->a_ops = &shmem_aops;
                 inode->i_op = &shmem_symlink_inode_operations;
                 kaddr = kmap_atomic(page, KM_USER0);
                 memcpy(kaddr, symname, len);
diff --git a/mm/swap.c b/mm/swap.c
index dd89234ee51f..7417a2adbe50 100644
--- a/mm/swap.c
+++ b/mm/swap.c
@@ -278,9 +278,10 @@ int lru_add_drain_all(void)
  * Avoid taking zone->lru_lock if possible, but if it is taken, retain it
  * for the remainder of the operation.
  *
- * The locking in this function is against shrink_cache(): we recheck the
- * page count inside the lock to see whether shrink_cache grabbed the page
- * via the LRU.  If it did, give up: shrink_cache will free it.
+ * The locking in this function is against shrink_inactive_list(): we recheck
+ * the page count inside the lock to see whether shrink_inactive_list()
+ * grabbed the page via the LRU.  If it did, give up: shrink_inactive_list()
+ * will free it.
  */
 void release_pages(struct page **pages, int nr, int cold)
 {
diff --git a/mm/swapfile.c b/mm/swapfile.c
index 6beb6251e99d..bb7f79641f9e 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -656,8 +656,8 @@ static int unuse_mm(struct mm_struct *mm,
 
         if (!down_read_trylock(&mm->mmap_sem)) {
                 /*
-                 * Activate page so shrink_cache is unlikely to unmap its
-                 * ptes while lock is dropped, so swapoff can make progress.
+                 * Activate page so shrink_inactive_list is unlikely to unmap
+                 * its ptes while lock is dropped, so swapoff can make progress.
                  */
                 activate_page(page);
                 unlock_page(page);
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 8f71761bc4b7..75be453628bf 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -1408,7 +1408,7 @@ static unsigned long do_try_to_free_pages(struct zonelist *zonelist,
                 if (sc->nr_scanned && priority < DEF_PRIORITY - 2)
                         congestion_wait(WRITE, HZ/10);
         }
-        /* top priority shrink_caches still had more to do? don't OOM, then */
+        /* top priority shrink_zones still had more to do? don't OOM, then */
         if (!sc->all_unreclaimable && scan_global_lru(sc))
                 ret = nr_reclaimed;
 out:
@@ -1979,7 +1979,7 @@ module_init(kswapd_init)
 int zone_reclaim_mode __read_mostly;
 
 #define RECLAIM_OFF 0
-#define RECLAIM_ZONE (1<<0)     /* Run shrink_cache on the zone */
+#define RECLAIM_ZONE (1<<0)     /* Run shrink_inactive_list on the zone */
 #define RECLAIM_WRITE (1<<1)    /* Writeout pages during reclaim */
 #define RECLAIM_SWAP (1<<2)     /* Swap pages out during reclaim */
 
diff --git a/net/Kconfig b/net/Kconfig
index b98668751749..7612cc8c337c 100644
--- a/net/Kconfig
+++ b/net/Kconfig
@@ -2,9 +2,7 @@
 # Network configuration
 #
 
-menu "Networking"
-
-config NET
+menuconfig NET
         bool "Networking support"
         ---help---
           Unless you really know what you are doing, you should say Y here.
@@ -22,7 +20,6 @@ config NET
           recommended to read the NET-HOWTO, available from
           <http://www.tldp.org/docs.html#howto>.
 
-# Make sure that all config symbols are dependent on NET
 if NET
 
 menu "Networking options"
@@ -252,5 +249,3 @@ source "net/rfkill/Kconfig"
 source "net/9p/Kconfig"
 
 endif   # if NET
-endmenu # Networking
-
diff --git a/net/atm/mpc.c b/net/atm/mpc.c
index 4fccaa1e07be..11b16d16661c 100644
--- a/net/atm/mpc.c
+++ b/net/atm/mpc.c
@@ -62,11 +62,13 @@ static void MPOA_cache_impos_rcvd(struct k_message *msg, struct mpoa_client *mpc
 static void set_mpc_ctrl_addr_rcvd(struct k_message *mesg, struct mpoa_client *mpc);
 static void set_mps_mac_addr_rcvd(struct k_message *mesg, struct mpoa_client *mpc);
 
-static uint8_t *copy_macs(struct mpoa_client *mpc, uint8_t *router_mac,
-                          uint8_t *tlvs, uint8_t mps_macs, uint8_t device_type);
+static const uint8_t *copy_macs(struct mpoa_client *mpc,
+                                const uint8_t *router_mac,
+                                const uint8_t *tlvs, uint8_t mps_macs,
+                                uint8_t device_type);
 static void purge_egress_shortcut(struct atm_vcc *vcc, eg_cache_entry *entry);
 
-static void send_set_mps_ctrl_addr(char *addr, struct mpoa_client *mpc);
+static void send_set_mps_ctrl_addr(const char *addr, struct mpoa_client *mpc);
 static void mpoad_close(struct atm_vcc *vcc);
 static int msg_from_mpoad(struct atm_vcc *vcc, struct sk_buff *skb);
 
@@ -351,12 +353,12 @@ static const char *mpoa_device_type_string(char type)
  * lec sees a TLV it uses the pointer to call this function.
  *
  */
-static void lane2_assoc_ind(struct net_device *dev, uint8_t *mac_addr,
-                            uint8_t *tlvs, uint32_t sizeoftlvs)
+static void lane2_assoc_ind(struct net_device *dev, const u8 *mac_addr,
+                            const u8 *tlvs, u32 sizeoftlvs)
 {
         uint32_t type;
         uint8_t length, mpoa_device_type, number_of_mps_macs;
-        uint8_t *end_of_tlvs;
+        const uint8_t *end_of_tlvs;
         struct mpoa_client *mpc;
 
         mpoa_device_type = number_of_mps_macs = 0; /* silence gcc */
@@ -430,8 +432,10 @@ static void lane2_assoc_ind(struct net_device *dev, uint8_t *mac_addr,
  * plus the possible MAC address(es) to mpc->mps_macs.
  * For a freshly allocated MPOA client mpc->mps_macs == 0.
  */
-static uint8_t *copy_macs(struct mpoa_client *mpc, uint8_t *router_mac,
-                          uint8_t *tlvs, uint8_t mps_macs, uint8_t device_type)
+static const uint8_t *copy_macs(struct mpoa_client *mpc,
+                                const uint8_t *router_mac,
+                                const uint8_t *tlvs, uint8_t mps_macs,
+                                uint8_t device_type)
 {
         int num_macs;
         num_macs = (mps_macs > 1) ? mps_macs : 1;
@@ -811,7 +815,7 @@ static int atm_mpoa_mpoad_attach (struct atm_vcc *vcc, int arg)
         return arg;
 }
 
-static void send_set_mps_ctrl_addr(char *addr, struct mpoa_client *mpc)
+static void send_set_mps_ctrl_addr(const char *addr, struct mpoa_client *mpc)
 {
         struct k_message mesg;
 
diff --git a/net/bridge/br_device.c b/net/bridge/br_device.c
index d9449df7cad5..9b58d70b0e7d 100644
--- a/net/bridge/br_device.c
+++ b/net/bridge/br_device.c
@@ -68,10 +68,17 @@ static int br_dev_stop(struct net_device *dev)
 
 static int br_change_mtu(struct net_device *dev, int new_mtu)
 {
-        if (new_mtu < 68 || new_mtu > br_min_mtu(netdev_priv(dev)))
+        struct net_bridge *br = netdev_priv(dev);
+        if (new_mtu < 68 || new_mtu > br_min_mtu(br))
                 return -EINVAL;
 
         dev->mtu = new_mtu;
+
+#ifdef CONFIG_BRIDGE_NETFILTER
+        /* remember the MTU in the rtable for PMTU */
+        br->fake_rtable.u.dst.metrics[RTAX_MTU - 1] = new_mtu;
+#endif
+
         return 0;
 }
 
diff --git a/net/bridge/br_if.c b/net/bridge/br_if.c
index a072ea5ca6f5..63c18aacde8c 100644
--- a/net/bridge/br_if.c
+++ b/net/bridge/br_if.c
@@ -202,6 +202,9 @@ static struct net_device *new_bridge_dev(const char *name)
         br->topology_change = 0;
         br->topology_change_detected = 0;
         br->ageing_time = 300 * HZ;
+
+        br_netfilter_rtable_init(br);
+
         INIT_LIST_HEAD(&br->age_list);
 
         br_stp_timer_init(br);
diff --git a/net/bridge/br_netfilter.c b/net/bridge/br_netfilter.c
index bb90cd7bace3..6e280a8a31ee 100644
--- a/net/bridge/br_netfilter.c
+++ b/net/bridge/br_netfilter.c
@@ -101,33 +101,30 @@ static inline __be16 pppoe_proto(const struct sk_buff *skb)
          pppoe_proto(skb) == htons(PPP_IPV6) && \
          brnf_filter_pppoe_tagged)
 
-/* We need these fake structures to make netfilter happy --
- * lots of places assume that skb->dst != NULL, which isn't
- * all that unreasonable.
- *
+/*
+ * Initialize bogus route table used to keep netfilter happy.
  * Currently, we fill in the PMTU entry because netfilter
  * refragmentation needs it, and the rt_flags entry because
  * ipt_REJECT needs it.  Future netfilter modules might
- * require us to fill additional fields. */
-static struct net_device __fake_net_device = {
-        .hard_header_len        = ETH_HLEN,
-#ifdef CONFIG_NET_NS
-        .nd_net                 = &init_net,
-#endif
-};
+ * require us to fill additional fields.
+ */
+void br_netfilter_rtable_init(struct net_bridge *br)
+{
+        struct rtable *rt = &br->fake_rtable;
 
-static struct rtable __fake_rtable = {
-        .u = {
-                .dst = {
-                        .__refcnt               = ATOMIC_INIT(1),
-                        .dev                    = &__fake_net_device,
-                        .path                   = &__fake_rtable.u.dst,
-                        .metrics                = {[RTAX_MTU - 1] = 1500},
-                        .flags                  = DST_NOXFRM,
-                }
-        },
-        .rt_flags       = 0,
-};
+        atomic_set(&rt->u.dst.__refcnt, 1);
+        rt->u.dst.dev = &br->dev;
+        rt->u.dst.path = &rt->u.dst;
+        rt->u.dst.metrics[RTAX_MTU - 1] = 1500;
+        rt->u.dst.flags = DST_NOXFRM;
+}
+
+static inline struct rtable *bridge_parent_rtable(const struct net_device *dev)
+{
+        struct net_bridge_port *port = rcu_dereference(dev->br_port);
+
+        return port ? &port->br->fake_rtable : NULL;
+}
 
 static inline struct net_device *bridge_parent(const struct net_device *dev)
 {
@@ -226,8 +223,12 @@ static int br_nf_pre_routing_finish_ipv6(struct sk_buff *skb)
         }
         nf_bridge->mask ^= BRNF_NF_BRIDGE_PREROUTING;
 
-        skb->rtable = &__fake_rtable;
-        dst_hold(&__fake_rtable.u.dst);
+        skb->rtable = bridge_parent_rtable(nf_bridge->physindev);
+        if (!skb->rtable) {
+                kfree_skb(skb);
+                return 0;
+        }
+        dst_hold(&skb->rtable->u.dst);
 
         skb->dev = nf_bridge->physindev;
         nf_bridge_push_encap_header(skb);
@@ -391,8 +392,12 @@ bridged_dnat:
                         skb->pkt_type = PACKET_HOST;
                 }
         } else {
-                skb->rtable = &__fake_rtable;
-                dst_hold(&__fake_rtable.u.dst);
+                skb->rtable = bridge_parent_rtable(nf_bridge->physindev);
+                if (!skb->rtable) {
+                        kfree_skb(skb);
+                        return 0;
+                }
+                dst_hold(&skb->rtable->u.dst);
         }
 
         skb->dev = nf_bridge->physindev;
@@ -611,8 +616,8 @@ static unsigned int br_nf_local_in(unsigned int hook, struct sk_buff *skb,
                                    const struct net_device *out,
                                    int (*okfn)(struct sk_buff *))
 {
-        if (skb->rtable == &__fake_rtable) {
-                dst_release(&__fake_rtable.u.dst);
+        if (skb->rtable && skb->rtable == bridge_parent_rtable(in)) {
+                dst_release(&skb->rtable->u.dst);
                 skb->rtable = NULL;
         }
 
diff --git a/net/bridge/br_private.h b/net/bridge/br_private.h
index 815ed38925b2..c3dc18ddc043 100644
--- a/net/bridge/br_private.h
+++ b/net/bridge/br_private.h
@@ -15,6 +15,7 @@
 
 #include <linux/netdevice.h>
 #include <linux/if_bridge.h>
+#include <net/route.h>
 
 #define BR_HASH_BITS 8
 #define BR_HASH_SIZE (1 << BR_HASH_BITS)
@@ -92,6 +93,9 @@ struct net_bridge
         struct hlist_head               hash[BR_HASH_SIZE];
         struct list_head                age_list;
         unsigned long                   feature_mask;
+#ifdef CONFIG_BRIDGE_NETFILTER
+        struct rtable                   fake_rtable;
+#endif
         unsigned long                   flags;
 #define BR_SET_MAC_ADDR         0x00000001
 
@@ -197,9 +201,11 @@ extern int br_ioctl_deviceless_stub(struct net *net, unsigned int cmd, void __us
 #ifdef CONFIG_BRIDGE_NETFILTER
 extern int br_netfilter_init(void);
 extern void br_netfilter_fini(void);
+extern void br_netfilter_rtable_init(struct net_bridge *);
 #else
 #define br_netfilter_init()     (0)
 #define br_netfilter_fini()     do { } while(0)
+#define br_netfilter_rtable_init(x)
 #endif
 
 /* br_stp.c */
diff --git a/net/core/dev.c b/net/core/dev.c
index 8d13a9b9f1df..69320a56a084 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -2100,7 +2100,7 @@ static int ing_filter(struct sk_buff *skb)
         rxq = &dev->rx_queue;
 
         q = rxq->qdisc;
-        if (q) {
+        if (q != &noop_qdisc) {
                 spin_lock(qdisc_lock(q));
                 result = qdisc_enqueue_root(skb, q);
                 spin_unlock(qdisc_lock(q));
@@ -2113,7 +2113,7 @@ static inline struct sk_buff *handle_ing(struct sk_buff *skb,
                                          struct packet_type **pt_prev,
                                          int *ret, struct net_device *orig_dev)
 {
-        if (!skb->dev->rx_queue.qdisc)
+        if (skb->dev->rx_queue.qdisc == &noop_qdisc)
                 goto out;
 
         if (*pt_prev) {
@@ -4200,6 +4200,7 @@ static void netdev_init_queues(struct net_device *dev)
 {
         netdev_init_one_queue(dev, &dev->rx_queue, NULL);
         netdev_for_each_tx_queue(dev, netdev_init_one_queue, NULL);
+        spin_lock_init(&dev->tx_global_lock);
 }
 
 /**
diff --git a/net/core/netpoll.c b/net/core/netpoll.c
index c12720895ecf..6c7af390be0a 100644
--- a/net/core/netpoll.c
+++ b/net/core/netpoll.c
@@ -70,6 +70,7 @@ static void queue_process(struct work_struct *work)
                 local_irq_save(flags);
                 __netif_tx_lock(txq, smp_processor_id());
                 if (netif_tx_queue_stopped(txq) ||
+                    netif_tx_queue_frozen(txq) ||
                     dev->hard_start_xmit(skb, dev) != NETDEV_TX_OK) {
                         skb_queue_head(&npinfo->txq, skb);
                         __netif_tx_unlock(txq);
diff --git a/net/core/pktgen.c b/net/core/pktgen.c
index c7d484f7e1c4..3284605f2ec7 100644
--- a/net/core/pktgen.c
+++ b/net/core/pktgen.c
@@ -3305,6 +3305,7 @@ static __inline__ void pktgen_xmit(struct pktgen_dev *pkt_dev)
 
         txq = netdev_get_tx_queue(odev, queue_map);
         if (netif_tx_queue_stopped(txq) ||
+            netif_tx_queue_frozen(txq) ||
             need_resched()) {
                 idle_start = getCurUs();
 
@@ -3320,7 +3321,8 @@ static __inline__ void pktgen_xmit(struct pktgen_dev *pkt_dev)
 
                 pkt_dev->idle_acc += getCurUs() - idle_start;
 
-                if (netif_tx_queue_stopped(txq)) {
+                if (netif_tx_queue_stopped(txq) ||
+                    netif_tx_queue_frozen(txq)) {
                         pkt_dev->next_tx_us = getCurUs();       /* TODO */
                         pkt_dev->next_tx_ns = 0;
                         goto out;       /* Try the next interface */
@@ -3352,7 +3354,8 @@ static __inline__ void pktgen_xmit(struct pktgen_dev *pkt_dev)
         txq = netdev_get_tx_queue(odev, queue_map);
 
         __netif_tx_lock_bh(txq);
-        if (!netif_tx_queue_stopped(txq)) {
+        if (!netif_tx_queue_stopped(txq) &&
+            !netif_tx_queue_frozen(txq)) {
 
                 atomic_inc(&(pkt_dev->skb->users));
               retry_now:
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index 4e0c92274189..84640172d65d 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -485,6 +485,9 @@ static struct sk_buff *__skb_clone(struct sk_buff *n, struct sk_buff *skb)
         C(head);
         C(data);
         C(truesize);
+#if defined(CONFIG_MAC80211) || defined(CONFIG_MAC80211_MODULE)
+        C(do_not_encrypt);
+#endif
         atomic_set(&n->users, 1);
 
         atomic_inc(&(skb_shinfo(skb)->dataref));
diff --git a/net/dccp/dccp.h b/net/dccp/dccp.h
index 743d85fcd651..1c2e3ec2eb57 100644
--- a/net/dccp/dccp.h
+++ b/net/dccp/dccp.h
@@ -226,7 +226,7 @@ static inline void dccp_csum_outgoing(struct sk_buff *skb)
 
 extern void dccp_v4_send_check(struct sock *sk, int len, struct sk_buff *skb);
 
-extern int  dccp_retransmit_skb(struct sock *sk, struct sk_buff *skb);
+extern int  dccp_retransmit_skb(struct sock *sk);
 
 extern void dccp_send_ack(struct sock *sk);
 extern void dccp_reqsk_send_ack(struct sk_buff *sk, struct request_sock *rsk);
diff --git a/net/dccp/ipv4.c b/net/dccp/ipv4.c
index a835b88237cb..882c5c4de69e 100644
--- a/net/dccp/ipv4.c
+++ b/net/dccp/ipv4.c
@@ -196,8 +196,8 @@ static inline void dccp_do_pmtu_discovery(struct sock *sk,
 static void dccp_v4_err(struct sk_buff *skb, u32 info)
 {
         const struct iphdr *iph = (struct iphdr *)skb->data;
-        const struct dccp_hdr *dh = (struct dccp_hdr *)(skb->data +
-                                                        (iph->ihl << 2));
+        const u8 offset = iph->ihl << 2;
+        const struct dccp_hdr *dh = (struct dccp_hdr *)(skb->data + offset);
         struct dccp_sock *dp;
         struct inet_sock *inet;
         const int type = icmp_hdr(skb)->type;
@@ -207,7 +207,8 @@ static void dccp_v4_err(struct sk_buff *skb, u32 info)
         int err;
         struct net *net = dev_net(skb->dev);
 
-        if (skb->len < (iph->ihl << 2) + 8) {
+        if (skb->len < offset + sizeof(*dh) ||
+            skb->len < offset + __dccp_basic_hdr_len(dh)) {
                 ICMP_INC_STATS_BH(net, ICMP_MIB_INERRORS);
                 return;
         }
@@ -238,7 +239,7 @@ static void dccp_v4_err(struct sk_buff *skb, u32 info)
         dp = dccp_sk(sk);
         seq = dccp_hdr_seq(dh);
         if ((1 << sk->sk_state) & ~(DCCPF_REQUESTING | DCCPF_LISTEN) &&
-            !between48(seq, dp->dccps_swl, dp->dccps_swh)) {
+            !between48(seq, dp->dccps_awl, dp->dccps_awh)) {
                 NET_INC_STATS_BH(net, LINUX_MIB_OUTOFWINDOWICMPS);
                 goto out;
         }
diff --git a/net/dccp/ipv6.c b/net/dccp/ipv6.c
index da509127e00c..5e1ee0da2c40 100644
--- a/net/dccp/ipv6.c
+++ b/net/dccp/ipv6.c
@@ -89,12 +89,19 @@ static void dccp_v6_err(struct sk_buff *skb, struct inet6_skb_parm *opt,
 {
         struct ipv6hdr *hdr = (struct ipv6hdr *)skb->data;
         const struct dccp_hdr *dh = (struct dccp_hdr *)(skb->data + offset);
+        struct dccp_sock *dp;
         struct ipv6_pinfo *np;
         struct sock *sk;
         int err;
         __u64 seq;
         struct net *net = dev_net(skb->dev);
 
+        if (skb->len < offset + sizeof(*dh) ||
+            skb->len < offset + __dccp_basic_hdr_len(dh)) {
+                ICMP6_INC_STATS_BH(__in6_dev_get(skb->dev), ICMP6_MIB_INERRORS);
+                return;
+        }
+
         sk = inet6_lookup(net, &dccp_hashinfo,
                         &hdr->daddr, dh->dccph_dport,
                         &hdr->saddr, dh->dccph_sport, inet6_iif(skb));
@@ -116,6 +123,14 @@ static void dccp_v6_err(struct sk_buff *skb, struct inet6_skb_parm *opt,
         if (sk->sk_state == DCCP_CLOSED)
                 goto out;
 
+        dp = dccp_sk(sk);
+        seq = dccp_hdr_seq(dh);
+        if ((1 << sk->sk_state) & ~(DCCPF_REQUESTING | DCCPF_LISTEN) &&
+            !between48(seq, dp->dccps_awl, dp->dccps_awh)) {
+                NET_INC_STATS_BH(net, LINUX_MIB_OUTOFWINDOWICMPS);
+                goto out;
+        }
+
         np = inet6_sk(sk);
 
         if (type == ICMPV6_PKT_TOOBIG) {
@@ -168,7 +183,6 @@ static void dccp_v6_err(struct sk_buff *skb, struct inet6_skb_parm *opt,
 
         icmpv6_err_convert(type, code, &err);
 
-        seq = dccp_hdr_seq(dh);
         /* Might be for an request_sock */
         switch (sk->sk_state) {
                 struct request_sock *req, **prev;
diff --git a/net/dccp/output.c b/net/dccp/output.c
index fe20068c5d8e..d06945c7d3df 100644
--- a/net/dccp/output.c
+++ b/net/dccp/output.c
@@ -53,8 +53,11 @@ static int dccp_transmit_skb(struct sock *sk, struct sk_buff *skb)
                                           dccp_packet_hdr_len(dcb->dccpd_type);
                 int err, set_ack = 1;
                 u64 ackno = dp->dccps_gsr;
-
-                dccp_inc_seqno(&dp->dccps_gss);
+                /*
+                 * Increment GSS here already in case the option code needs it.
+                 * Update GSS for real only if option processing below succeeds.
+                 */
+                dcb->dccpd_seq = ADD48(dp->dccps_gss, 1);
 
                 switch (dcb->dccpd_type) {
                 case DCCP_PKT_DATA:
@@ -66,6 +69,9 @@ static int dccp_transmit_skb(struct sock *sk, struct sk_buff *skb)
 
                 case DCCP_PKT_REQUEST:
                         set_ack = 0;
+                        /* Use ISS on the first (non-retransmitted) Request. */
+                        if (icsk->icsk_retransmits == 0)
+                                dcb->dccpd_seq = dp->dccps_iss;
                         /* fall through */
 
                 case DCCP_PKT_SYNC:
@@ -84,8 +90,6 @@ static int dccp_transmit_skb(struct sock *sk, struct sk_buff *skb)
                         break;
                 }
 
-                dcb->dccpd_seq = dp->dccps_gss;
-
                 if (dccp_insert_options(sk, skb)) {
                         kfree_skb(skb);
                         return -EPROTO;
@@ -103,7 +107,7 @@ static int dccp_transmit_skb(struct sock *sk, struct sk_buff *skb)
                 /* XXX For now we're using only 48 bits sequence numbers */
                 dh->dccph_x     = 1;
 
-                dp->dccps_awh = dp->dccps_gss;
+                dccp_update_gss(sk, dcb->dccpd_seq);
                 dccp_hdr_set_seq(dh, dp->dccps_gss);
                 if (set_ack)
                         dccp_hdr_set_ack(dccp_hdr_ack_bits(skb), ackno);
@@ -112,6 +116,11 @@ static int dccp_transmit_skb(struct sock *sk, struct sk_buff *skb)
                 case DCCP_PKT_REQUEST:
                         dccp_hdr_request(skb)->dccph_req_service =
                                                         dp->dccps_service;
+                        /*
+                         * Limit Ack window to ISS <= P.ackno <= GSS, so that
+                         * only Responses to Requests we sent are considered.
+                         */
+                        dp->dccps_awl = dp->dccps_iss;
                         break;
                 case DCCP_PKT_RESET:
                         dccp_hdr_reset(skb)->dccph_reset_code =
@@ -284,14 +293,26 @@ void dccp_write_xmit(struct sock *sk, int block)
         }
 }
 
-int dccp_retransmit_skb(struct sock *sk, struct sk_buff *skb)
+/**
+ * dccp_retransmit_skb  -  Retransmit Request, Close, or CloseReq packets
+ * There are only four retransmittable packet types in DCCP:
+ * - Request  in client-REQUEST  state (sec. 8.1.1),
+ * - CloseReq in server-CLOSEREQ state (sec. 8.3),
+ * - Close    in   node-CLOSING  state (sec. 8.3),
+ * - Acks in client-PARTOPEN state (sec. 8.1.5, handled by dccp_delack_timer()).
+ * This function expects sk->sk_send_head to contain the original skb.
+ */
+int dccp_retransmit_skb(struct sock *sk)
 {
+        WARN_ON(sk->sk_send_head == NULL);
+
         if (inet_csk(sk)->icsk_af_ops->rebuild_header(sk) != 0)
                 return -EHOSTUNREACH; /* Routing failure or similar. */
 
-        return dccp_transmit_skb(sk, (skb_cloned(skb) ?
-                                      pskb_copy(skb, GFP_ATOMIC):
-                                      skb_clone(skb, GFP_ATOMIC)));
+        /* this count is used to distinguish original and retransmitted skb */
+        inet_csk(sk)->icsk_retransmits++;
+
+        return dccp_transmit_skb(sk, skb_clone(sk->sk_send_head, GFP_ATOMIC));
 }
 
 struct sk_buff *dccp_make_response(struct sock *sk, struct dst_entry *dst,
@@ -437,19 +458,7 @@ static inline void dccp_connect_init(struct sock *sk)
 
         dccp_sync_mss(sk, dst_mtu(dst));
 
-        /*
-         * SWL and AWL are initially adjusted so that they are not less than
-         * the initial Sequence Numbers received and sent, respectively:
-         *      SWL := max(GSR + 1 - floor(W/4), ISR),
-         *      AWL := max(GSS - W' + 1, ISS).
-         * These adjustments MUST be applied only at the beginning of the
-         * connection.
-         */
-        dccp_update_gss(sk, dp->dccps_iss);
-        dccp_set_seqno(&dp->dccps_awl, max48(dp->dccps_awl, dp->dccps_iss));
-
-        /* S.GAR - greatest valid acknowledgement number received on a non-Sync;
-         *         initialized to S.ISS (sec. 8.5)                            */
+        /* Initialise GAR as per 8.5; AWL/AWH are set in dccp_transmit_skb() */
         dp->dccps_gar = dp->dccps_iss;
 
         icsk->icsk_retransmits = 0;
diff --git a/net/dccp/timer.c b/net/dccp/timer.c
index 6a5b961b6f5c..54b3c7e9e016 100644
--- a/net/dccp/timer.c
+++ b/net/dccp/timer.c
@@ -99,21 +99,11 @@ static void dccp_retransmit_timer(struct sock *sk)
         }
 
         /*
-         * sk->sk_send_head has to have one skb with
-         * DCCP_SKB_CB(skb)->dccpd_type set to one of the retransmittable DCCP
-         * packet types. The only packets eligible for retransmission are:
-         *      -- Requests in client-REQUEST  state (sec. 8.1.1)
-         *      -- Acks     in client-PARTOPEN state (sec. 8.1.5)
-         *      -- CloseReq in server-CLOSEREQ state (sec. 8.3)
-         *      -- Close    in   node-CLOSING  state (sec. 8.3)                */
-        WARN_ON(sk->sk_send_head == NULL);
-
-        /*
          * More than than 4MSL (8 minutes) has passed, a RESET(aborted) was
          * sent, no need to retransmit, this sock is dead.
          */
         if (dccp_write_timeout(sk))
-                goto out;
+                return;
 
         /*
          * We want to know the number of packets retransmitted, not the
@@ -122,30 +112,28 @@ static void dccp_retransmit_timer(struct sock *sk)
         if (icsk->icsk_retransmits == 0)
                 DCCP_INC_STATS_BH(DCCP_MIB_TIMEOUTS);
 
-        if (dccp_retransmit_skb(sk, sk->sk_send_head) < 0) {
+        if (dccp_retransmit_skb(sk) != 0) {
                 /*
                  * Retransmission failed because of local congestion,
                  * do not backoff.
                  */
-                if (icsk->icsk_retransmits == 0)
+                if (--icsk->icsk_retransmits == 0)
                         icsk->icsk_retransmits = 1;
                 inet_csk_reset_xmit_timer(sk, ICSK_TIME_RETRANS,
                                           min(icsk->icsk_rto,
                                               TCP_RESOURCE_PROBE_INTERVAL),
                                           DCCP_RTO_MAX);
-                goto out;
+                return;
         }
 
 backoff:
         icsk->icsk_backoff++;
-        icsk->icsk_retransmits++;
 
         icsk->icsk_rto = min(icsk->icsk_rto << 1, DCCP_RTO_MAX);
         inet_csk_reset_xmit_timer(sk, ICSK_TIME_RETRANS, icsk->icsk_rto,
                                   DCCP_RTO_MAX);
         if (icsk->icsk_retransmits > sysctl_dccp_retries1)
                 __sk_dst_reset(sk);
-out:;
 }
 
 static void dccp_write_timer(unsigned long data)
diff --git a/net/ipv4/ipcomp.c b/net/ipv4/ipcomp.c
index a42b64d040c4..38ccb6dfb02e 100644
--- a/net/ipv4/ipcomp.c
+++ b/net/ipv4/ipcomp.c
@@ -104,9 +104,7 @@ out:
 
 static int ipcomp4_init_state(struct xfrm_state *x)
 {
-        int err;
-        struct ipcomp_data *ipcd;
-        struct xfrm_algo_desc *calg_desc;
+        int err = -EINVAL;
 
         x->props.header_len = 0;
         switch (x->props.mode) {
diff --git a/net/ipv4/netfilter/ipt_CLUSTERIP.c b/net/ipv4/netfilter/ipt_CLUSTERIP.c
index 1819ad7ab910..fafe8ebb4c55 100644
--- a/net/ipv4/netfilter/ipt_CLUSTERIP.c
+++ b/net/ipv4/netfilter/ipt_CLUSTERIP.c
@@ -475,11 +475,10 @@ static void arp_print(struct arp_payload *payload)
 #define HBUFFERLEN 30
         char hbuffer[HBUFFERLEN];
         int j,k;
-        const char hexbuf[]= "0123456789abcdef";
 
         for (k=0, j=0; k < HBUFFERLEN-3 && j < ETH_ALEN; j++) {
-                hbuffer[k++]=hexbuf[(payload->src_hw[j]>>4)&15];
-                hbuffer[k++]=hexbuf[payload->src_hw[j]&15];
+                hbuffer[k++] = hex_asc_hi(payload->src_hw[j]);
+                hbuffer[k++] = hex_asc_lo(payload->src_hw[j]);
                 hbuffer[k++]=':';
         }
         hbuffer[--k]='\0';
diff --git a/net/ipv4/netfilter/ipt_recent.c b/net/ipv4/netfilter/ipt_recent.c
index 21cb053f5d7d..3974d7cae5c0 100644
--- a/net/ipv4/netfilter/ipt_recent.c
+++ b/net/ipv4/netfilter/ipt_recent.c
@@ -305,10 +305,10 @@ static void recent_mt_destroy(const struct xt_match *match, void *matchinfo)
                 spin_lock_bh(&recent_lock);
                 list_del(&t->list);
                 spin_unlock_bh(&recent_lock);
-                recent_table_flush(t);
 #ifdef CONFIG_PROC_FS
                 remove_proc_entry(t->name, proc_dir);
 #endif
+                recent_table_flush(t);
                 kfree(t);
         }
         mutex_unlock(&recent_mutex);
diff --git a/net/ipv4/proc.c b/net/ipv4/proc.c
index 834356ea99df..8f5a403f6f6b 100644
--- a/net/ipv4/proc.c
+++ b/net/ipv4/proc.c
@@ -232,6 +232,8 @@ static const struct snmp_mib snmp4_net_list[] = {
         SNMP_MIB_ITEM("TCPDSACKIgnoredOld", LINUX_MIB_TCPDSACKIGNOREDOLD),
         SNMP_MIB_ITEM("TCPDSACKIgnoredNoUndo", LINUX_MIB_TCPDSACKIGNOREDNOUNDO),
         SNMP_MIB_ITEM("TCPSpuriousRTOs", LINUX_MIB_TCPSPURIOUSRTOS),
+        SNMP_MIB_ITEM("TCPMD5NotFound", LINUX_MIB_TCPMD5NOTFOUND),
+        SNMP_MIB_ITEM("TCPMD5Unexpected", LINUX_MIB_TCPMD5UNEXPECTED),
         SNMP_MIB_SENTINEL
 };
 
diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index 380d6474cf66..1bfa078ddbd0 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -3216,14 +3216,18 @@ int __init ip_rt_init(void)
         return rc;
 }
 
+#ifdef CONFIG_SYSCTL
 /*
  * We really need to sanitize the damn ipv4 init order, then all
  * this nonsense will go away.
  */
 void __init ip_static_sysctl_init(void)
 {
+#ifdef CONFIG_SYSCTL
         register_sysctl_paths(ipv4_route_path, ipv4_route_table);
+#endif
 }
+#endif
 
 EXPORT_SYMBOL(__ip_select_ident);
 EXPORT_SYMBOL(ip_route_input);
diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c
index a2b06d0cc26b..91a8cfddf1c4 100644
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -655,8 +655,8 @@ static void tcp_v4_send_ack(struct sk_buff *skb, u32 seq, u32 ack,
                 rep.th.doff = arg.iov[0].iov_len/4;
 
                 tcp_v4_md5_hash_hdr((__u8 *) &rep.opt[offset],
-                                    key, ip_hdr(skb)->daddr,
-                                    ip_hdr(skb)->saddr, &rep.th);
+                                    key, ip_hdr(skb)->saddr,
+                                    ip_hdr(skb)->daddr, &rep.th);
         }
 #endif
         arg.csum = csum_tcpudp_nofold(ip_hdr(skb)->daddr,
@@ -1116,18 +1116,12 @@ static int tcp_v4_inbound_md5_hash(struct sock *sk, struct sk_buff *skb)
                 return 0;
 
         if (hash_expected && !hash_location) {
-                LIMIT_NETDEBUG(KERN_INFO "MD5 Hash expected but NOT found "
-                               "(" NIPQUAD_FMT ", %d)->(" NIPQUAD_FMT ", %d)\n",
-                               NIPQUAD(iph->saddr), ntohs(th->source),
-                               NIPQUAD(iph->daddr), ntohs(th->dest));
+                NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_TCPMD5NOTFOUND);
                 return 1;
         }
 
         if (!hash_expected && hash_location) {
-                LIMIT_NETDEBUG(KERN_INFO "MD5 Hash NOT expected but found "
-                               "(" NIPQUAD_FMT ", %d)->(" NIPQUAD_FMT ", %d)\n",
-                               NIPQUAD(iph->saddr), ntohs(th->source),
-                               NIPQUAD(iph->daddr), ntohs(th->dest));
+                NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_TCPMD5UNEXPECTED);
                 return 1;
         }
 
diff --git a/net/ipv6/datagram.c b/net/ipv6/datagram.c
index f7b535dec860..410046a8cc91 100644
--- a/net/ipv6/datagram.c
+++ b/net/ipv6/datagram.c
@@ -732,7 +732,7 @@ int datagram_send_ctl(struct net *net,
                         LIMIT_NETDEBUG(KERN_DEBUG "invalid cmsg type: %d\n",
                                        cmsg->cmsg_type);
                         err = -EINVAL;
-                        break;
+                        goto exit_f;
                 }
         }
 
diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c
index 6811901e6b1e..a027003d69a4 100644
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -236,6 +236,10 @@ int ip6_xmit(struct sock *sk, struct sk_buff *skb, struct flowi *fl,
         skb_reset_network_header(skb);
         hdr = ipv6_hdr(skb);
 
+        /* Allow local fragmentation. */
+        if (ipfragok)
+                skb->local_df = 1;
+
         /*
          *      Fill in the IPv6 header
          */
diff --git a/net/ipv6/ipcomp6.c b/net/ipv6/ipcomp6.c
index 0cfcea42153a..4545e4306862 100644
--- a/net/ipv6/ipcomp6.c
+++ b/net/ipv6/ipcomp6.c
@@ -134,9 +134,7 @@ out:
 
 static int ipcomp6_init_state(struct xfrm_state *x)
 {
-        int err;
-        struct ipcomp_data *ipcd;
-        struct xfrm_algo_desc *calg_desc;
+        int err = -EINVAL;
 
         x->props.header_len = 0;
         switch (x->props.mode) {
diff --git a/net/ipv6/proc.c b/net/ipv6/proc.c
index f82f6074cf85..0179b66864f1 100644
--- a/net/ipv6/proc.c
+++ b/net/ipv6/proc.c
@@ -286,7 +286,6 @@ proc_net_fail:
 
 void ipv6_misc_proc_exit(void)
 {
-        proc_net_remove(&init_net, "sockstat6");
         proc_net_remove(&init_net, "dev_snmp6");
         proc_net_remove(&init_net, "snmp6");
         unregister_pernet_subsys(&ipv6_proc_ops);
diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c
index cff778b23a7f..78185a409212 100644
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -748,7 +748,7 @@ static int tcp_v6_md5_hash_pseudoheader(struct tcp_md5sig_pool *hp,
         ipv6_addr_copy(&bp->saddr, saddr);
         ipv6_addr_copy(&bp->daddr, daddr);
         bp->protocol = cpu_to_be32(IPPROTO_TCP);
-        bp->len = cpu_to_be16(nbytes);
+        bp->len = cpu_to_be32(nbytes);
 
         sg_init_one(&sg, bp, sizeof(*bp));
         return crypto_hash_update(&hp->md5_desc, &sg, sizeof(*bp));
@@ -849,28 +849,17 @@ static int tcp_v6_inbound_md5_hash (struct sock *sk, struct sk_buff *skb)
         hash_expected = tcp_v6_md5_do_lookup(sk, &ip6h->saddr);
         hash_location = tcp_parse_md5sig_option(th);
 
-        /* do we have a hash as expected? */
-        if (!hash_expected) {
-                if (!hash_location)
-                        return 0;
-                if (net_ratelimit()) {
-                        printk(KERN_INFO "MD5 Hash NOT expected but found "
-                               "(" NIP6_FMT ", %u)->"
-                               "(" NIP6_FMT ", %u)\n",
-                               NIP6(ip6h->saddr), ntohs(th->source),
-                               NIP6(ip6h->daddr), ntohs(th->dest));
-                }
+        /* We've parsed the options - do we have a hash? */
+        if (!hash_expected && !hash_location)
+                return 0;
+
+        if (hash_expected && !hash_location) {
+                NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_TCPMD5NOTFOUND);
                 return 1;
         }
 
-        if (!hash_location) {
-                if (net_ratelimit()) {
-                        printk(KERN_INFO "MD5 Hash expected but NOT found "
-                               "(" NIP6_FMT ", %u)->"
-                               "(" NIP6_FMT ", %u)\n",
-                               NIP6(ip6h->saddr), ntohs(th->source),
-                               NIP6(ip6h->daddr), ntohs(th->dest));
-                }
+        if (!hash_expected && hash_location) {
+                NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_TCPMD5UNEXPECTED);
                 return 1;
         }
 
@@ -1105,8 +1094,8 @@ static void tcp_v6_send_ack(struct sk_buff *skb, u32 seq, u32 ack, u32 win, u32
                 *topt++ = htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
                                 (TCPOPT_MD5SIG << 8) | TCPOLEN_MD5SIG);
                 tcp_v6_md5_hash_hdr((__u8 *)topt, key,
-                                    &ipv6_hdr(skb)->daddr,
-                                    &ipv6_hdr(skb)->saddr, t1);
+                                    &ipv6_hdr(skb)->saddr,
+                                    &ipv6_hdr(skb)->daddr, t1);
         }
 #endif
 
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 8e7ba0e62cf5..297c257864c7 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -81,6 +81,7 @@ static int ieee80211_change_iface(struct wiphy *wiphy, int ifindex,
                                   enum nl80211_iftype type, u32 *flags,
                                   struct vif_params *params)
 {
+        struct ieee80211_local *local = wiphy_priv(wiphy);
         struct net_device *dev;
         enum ieee80211_if_types itype;
         struct ieee80211_sub_if_data *sdata;
@@ -95,6 +96,9 @@ static int ieee80211_change_iface(struct wiphy *wiphy, int ifindex,
         if (itype == IEEE80211_IF_TYPE_INVALID)
                 return -EINVAL;
 
+        if (dev == local->mdev)
+                return -EOPNOTSUPP;
+
         sdata = IEEE80211_DEV_TO_SUB_IF(dev);
 
         ret = ieee80211_if_change_type(sdata, itype);
@@ -117,12 +121,16 @@ static int ieee80211_add_key(struct wiphy *wiphy, struct net_device *dev,
                              u8 key_idx, u8 *mac_addr,
                              struct key_params *params)
 {
+        struct ieee80211_local *local = wiphy_priv(wiphy);
         struct ieee80211_sub_if_data *sdata;
         struct sta_info *sta = NULL;
         enum ieee80211_key_alg alg;
         struct ieee80211_key *key;
         int err;
 
+        if (dev == local->mdev)
+                return -EOPNOTSUPP;
+
         sdata = IEEE80211_DEV_TO_SUB_IF(dev);
 
         switch (params->cipher) {
@@ -167,10 +175,14 @@ static int ieee80211_add_key(struct wiphy *wiphy, struct net_device *dev,
 static int ieee80211_del_key(struct wiphy *wiphy, struct net_device *dev,
                              u8 key_idx, u8 *mac_addr)
 {
+        struct ieee80211_local *local = wiphy_priv(wiphy);
         struct ieee80211_sub_if_data *sdata;
         struct sta_info *sta;
         int ret;
 
+        if (dev == local->mdev)
+                return -EOPNOTSUPP;
+
         sdata = IEEE80211_DEV_TO_SUB_IF(dev);
 
         rcu_read_lock();
@@ -211,7 +223,8 @@ static int ieee80211_get_key(struct wiphy *wiphy, struct net_device *dev,
                              void (*callback)(void *cookie,
                                               struct key_params *params))
 {
-        struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+        struct ieee80211_local *local = wiphy_priv(wiphy);
+        struct ieee80211_sub_if_data *sdata;
         struct sta_info *sta = NULL;
         u8 seq[6] = {0};
         struct key_params params;
@@ -220,6 +233,11 @@ static int ieee80211_get_key(struct wiphy *wiphy, struct net_device *dev,
         u16 iv16;
         int err = -ENOENT;
 
+        if (dev == local->mdev)
+                return -EOPNOTSUPP;
+
+        sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
         rcu_read_lock();
 
         if (mac_addr) {
@@ -293,8 +311,12 @@ static int ieee80211_config_default_key(struct wiphy *wiphy,
                                         struct net_device *dev,
                                         u8 key_idx)
 {
+        struct ieee80211_local *local = wiphy_priv(wiphy);
         struct ieee80211_sub_if_data *sdata;
 
+        if (dev == local->mdev)
+                return -EOPNOTSUPP;
+
         rcu_read_lock();
 
         sdata = IEEE80211_DEV_TO_SUB_IF(dev);
@@ -475,9 +497,15 @@ static int ieee80211_config_beacon(struct ieee80211_sub_if_data *sdata,
 static int ieee80211_add_beacon(struct wiphy *wiphy, struct net_device *dev,
                                 struct beacon_parameters *params)
 {
-        struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+        struct ieee80211_local *local = wiphy_priv(wiphy);
+        struct ieee80211_sub_if_data *sdata;
         struct beacon_data *old;
 
+        if (dev == local->mdev)
+                return -EOPNOTSUPP;
+
+        sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
         if (sdata->vif.type != IEEE80211_IF_TYPE_AP)
                 return -EINVAL;
 
@@ -492,9 +520,15 @@ static int ieee80211_add_beacon(struct wiphy *wiphy, struct net_device *dev,
 static int ieee80211_set_beacon(struct wiphy *wiphy, struct net_device *dev,
                                 struct beacon_parameters *params)
 {
-        struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+        struct ieee80211_local *local = wiphy_priv(wiphy);
+        struct ieee80211_sub_if_data *sdata;
         struct beacon_data *old;
 
+        if (dev == local->mdev)
+                return -EOPNOTSUPP;
+
+        sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
         if (sdata->vif.type != IEEE80211_IF_TYPE_AP)
                 return -EINVAL;
 
@@ -508,9 +542,15 @@ static int ieee80211_set_beacon(struct wiphy *wiphy, struct net_device *dev,
 
 static int ieee80211_del_beacon(struct wiphy *wiphy, struct net_device *dev)
 {
-        struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+        struct ieee80211_local *local = wiphy_priv(wiphy);
+        struct ieee80211_sub_if_data *sdata;
         struct beacon_data *old;
 
+        if (dev == local->mdev)
+                return -EOPNOTSUPP;
+
+        sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
         if (sdata->vif.type != IEEE80211_IF_TYPE_AP)
                 return -EINVAL;
 
@@ -646,11 +686,14 @@ static void sta_apply_parameters(struct ieee80211_local *local,
 static int ieee80211_add_station(struct wiphy *wiphy, struct net_device *dev,
                                  u8 *mac, struct station_parameters *params)
 {
-        struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+        struct ieee80211_local *local = wiphy_priv(wiphy);
         struct sta_info *sta;
         struct ieee80211_sub_if_data *sdata;
         int err;
 
+        if (dev == local->mdev || params->vlan == local->mdev)
+                return -EOPNOTSUPP;
+
         /* Prevent a race with changing the rate control algorithm */
         if (!netif_running(dev))
                 return -ENETDOWN;
@@ -701,10 +744,15 @@ static int ieee80211_add_station(struct wiphy *wiphy, struct net_device *dev,
 static int ieee80211_del_station(struct wiphy *wiphy, struct net_device *dev,
                                  u8 *mac)
 {
-        struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
-        struct ieee80211_local *local = sdata->local;
+        struct ieee80211_local *local = wiphy_priv(wiphy);
+        struct ieee80211_sub_if_data *sdata;
         struct sta_info *sta;
 
+        if (dev == local->mdev)
+                return -EOPNOTSUPP;
+
+        sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
         if (mac) {
                 rcu_read_lock();
 
@@ -730,10 +778,13 @@ static int ieee80211_change_station(struct wiphy *wiphy,
                                     u8 *mac,
                                     struct station_parameters *params)
 {
-        struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+        struct ieee80211_local *local = wiphy_priv(wiphy);
         struct sta_info *sta;
         struct ieee80211_sub_if_data *vlansdata;
 
+        if (dev == local->mdev || params->vlan == local->mdev)
+                return -EOPNOTSUPP;
+
         rcu_read_lock();
 
         /* XXX: get sta belonging to dev */
@@ -752,7 +803,7 @@ static int ieee80211_change_station(struct wiphy *wiphy,
                         return -EINVAL;
                 }
 
-                sta->sdata = IEEE80211_DEV_TO_SUB_IF(params->vlan);
+                sta->sdata = vlansdata;
                 ieee80211_send_layer2_update(sta);
         }
 
@@ -767,15 +818,20 @@ static int ieee80211_change_station(struct wiphy *wiphy,
 static int ieee80211_add_mpath(struct wiphy *wiphy, struct net_device *dev,
                                  u8 *dst, u8 *next_hop)
 {
-        struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
-        struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+        struct ieee80211_local *local = wiphy_priv(wiphy);
+        struct ieee80211_sub_if_data *sdata;
         struct mesh_path *mpath;
         struct sta_info *sta;
         int err;
 
+        if (dev == local->mdev)
+                return -EOPNOTSUPP;
+
         if (!netif_running(dev))
                 return -ENETDOWN;
 
+        sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
         if (sdata->vif.type != IEEE80211_IF_TYPE_MESH_POINT)
                 return -ENOTSUPP;
 
@@ -817,14 +873,19 @@ static int ieee80211_change_mpath(struct wiphy *wiphy,
                                     struct net_device *dev,
                                     u8 *dst, u8 *next_hop)
 {
-        struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
-        struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+        struct ieee80211_local *local = wiphy_priv(wiphy);
+        struct ieee80211_sub_if_data *sdata;
         struct mesh_path *mpath;
         struct sta_info *sta;
 
+        if (dev == local->mdev)
+                return -EOPNOTSUPP;
+
         if (!netif_running(dev))
                 return -ENETDOWN;
 
+        sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
         if (sdata->vif.type != IEEE80211_IF_TYPE_MESH_POINT)
                 return -ENOTSUPP;
 
@@ -891,9 +952,15 @@ static int ieee80211_get_mpath(struct wiphy *wiphy, struct net_device *dev,
                                u8 *dst, u8 *next_hop, struct mpath_info *pinfo)
 
 {
-        struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+        struct ieee80211_local *local = wiphy_priv(wiphy);
+        struct ieee80211_sub_if_data *sdata;
         struct mesh_path *mpath;
 
+        if (dev == local->mdev)
+                return -EOPNOTSUPP;
+
+        sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
         if (sdata->vif.type != IEEE80211_IF_TYPE_MESH_POINT)
                 return -ENOTSUPP;
 
@@ -913,9 +980,15 @@ static int ieee80211_dump_mpath(struct wiphy *wiphy, struct net_device *dev,
                                  int idx, u8 *dst, u8 *next_hop,
                                  struct mpath_info *pinfo)
 {
-        struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+        struct ieee80211_local *local = wiphy_priv(wiphy);
+        struct ieee80211_sub_if_data *sdata;
         struct mesh_path *mpath;
 
+        if (dev == local->mdev)
+                return -EOPNOTSUPP;
+
+        sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
         if (sdata->vif.type != IEEE80211_IF_TYPE_MESH_POINT)
                 return -ENOTSUPP;
 
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index f1a83d450ea0..a4c5b90de769 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -1233,18 +1233,12 @@ static void ieee80211_tasklet_handler(unsigned long data)
 /* Remove added headers (e.g., QoS control), encryption header/MIC, etc. to
  * make a prepared TX frame (one that has been given to hw) to look like brand
  * new IEEE 802.11 frame that is ready to go through TX processing again.
- * Also, tx_packet_data in cb is restored from tx_control. */
+ */
 static void ieee80211_remove_tx_extra(struct ieee80211_local *local,
                                       struct ieee80211_key *key,
                                       struct sk_buff *skb)
 {
         int hdrlen, iv_len, mic_len;
-        struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
-
-        info->flags &=  IEEE80211_TX_CTL_REQ_TX_STATUS |
-                        IEEE80211_TX_CTL_DO_NOT_ENCRYPT |
-                        IEEE80211_TX_CTL_REQUEUE |
-                        IEEE80211_TX_CTL_EAPOL_FRAME;
 
         hdrlen = ieee80211_get_hdrlen_from_skb(skb);
 
@@ -1731,8 +1725,8 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
         result = ieee80211_wep_init(local);
 
         if (result < 0) {
-                printk(KERN_DEBUG "%s: Failed to initialize wep\n",
-                       wiphy_name(local->hw.wiphy));
+                printk(KERN_DEBUG "%s: Failed to initialize wep: %d\n",
+                       wiphy_name(local->hw.wiphy), result);
                 goto fail_wep;
         }
 
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index d7c371e36bf0..acb04133a95d 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -606,7 +606,6 @@ void ieee80211_sta_tx(struct net_device *dev, struct sk_buff *skb,
                       int encrypt)
 {
         struct ieee80211_sub_if_data *sdata;
-        struct ieee80211_tx_info *info;
 
         sdata = IEEE80211_DEV_TO_SUB_IF(dev);
         skb->dev = sdata->local->mdev;
@@ -614,11 +613,8 @@ void ieee80211_sta_tx(struct net_device *dev, struct sk_buff *skb,
         skb_set_network_header(skb, 0);
         skb_set_transport_header(skb, 0);
 
-        info = IEEE80211_SKB_CB(skb);
-        memset(info, 0, sizeof(struct ieee80211_tx_info));
-        info->control.ifindex = sdata->dev->ifindex;
-        if (!encrypt)
-                info->flags |= IEEE80211_TX_CTL_DO_NOT_ENCRYPT;
+        skb->iif = sdata->dev->ifindex;
+        skb->do_not_encrypt = !encrypt;
 
         dev_queue_xmit(skb);
 }
@@ -3303,6 +3299,7 @@ void ieee80211_start_mesh(struct net_device *dev)
         ifsta = &sdata->u.sta;
         ifsta->state = IEEE80211_MESH_UP;
         ieee80211_sta_timer((unsigned long)sdata);
+        ieee80211_if_config(sdata, IEEE80211_IFCC_BEACON);
 }
 #endif
 
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 0fbadd8b983c..69019e943873 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -305,7 +305,7 @@ static void purge_old_ps_buffers(struct ieee80211_local *local)
         rcu_read_unlock();
 
         local->total_ps_buffered = total;
-#ifdef MAC80211_VERBOSE_PS_DEBUG
+#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
         printk(KERN_DEBUG "%s: PS buffers full - purged %d frames\n",
                wiphy_name(local->hw.wiphy), purged);
 #endif
@@ -342,7 +342,7 @@ ieee80211_tx_h_multicast_ps_buf(struct ieee80211_tx_data *tx)
                         purge_old_ps_buffers(tx->local);
                 if (skb_queue_len(&tx->sdata->bss->ps_bc_buf) >=
                     AP_MAX_BC_BUFFER) {
-#ifdef MAC80211_VERBOSE_PS_DEBUG
+#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
                         if (net_ratelimit()) {
                                 printk(KERN_DEBUG "%s: BC TX buffer full - "
                                        "dropping the oldest frame\n",
@@ -389,7 +389,7 @@ ieee80211_tx_h_unicast_ps_buf(struct ieee80211_tx_data *tx)
                         purge_old_ps_buffers(tx->local);
                 if (skb_queue_len(&sta->ps_tx_buf) >= STA_MAX_TX_BUFFER) {
                         struct sk_buff *old = skb_dequeue(&sta->ps_tx_buf);
-#ifdef MAC80211_VERBOSE_PS_DEBUG
+#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
                         if (net_ratelimit()) {
                                 printk(KERN_DEBUG "%s: STA %s TX "
                                        "buffer full - dropping oldest frame\n",
@@ -439,14 +439,14 @@ ieee80211_tx_h_select_key(struct ieee80211_tx_data *tx)
         struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb);
         u16 fc = tx->fc;
 
-        if (unlikely(info->flags & IEEE80211_TX_CTL_DO_NOT_ENCRYPT))
+        if (unlikely(tx->skb->do_not_encrypt))
                 tx->key = NULL;
         else if (tx->sta && (key = rcu_dereference(tx->sta->key)))
                 tx->key = key;
         else if ((key = rcu_dereference(tx->sdata->default_key)))
                 tx->key = key;
         else if (tx->sdata->drop_unencrypted &&
-                 !(info->flags & IEEE80211_TX_CTL_EAPOL_FRAME) &&
+                 (tx->skb->protocol != cpu_to_be16(ETH_P_PAE)) &&
                  !(info->flags & IEEE80211_TX_CTL_INJECTED)) {
                 I802_DEBUG_INC(tx->local->tx_handlers_drop_unencrypted);
                 return TX_DROP;
@@ -476,7 +476,7 @@ ieee80211_tx_h_select_key(struct ieee80211_tx_data *tx)
         }
 
         if (!tx->key || !(tx->key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE))
-                info->flags |= IEEE80211_TX_CTL_DO_NOT_ENCRYPT;
+                tx->skb->do_not_encrypt = 1;
 
         return TX_CONTINUE;
 }
@@ -732,6 +732,7 @@ ieee80211_tx_h_fragment(struct ieee80211_tx_data *tx)
                 memcpy(skb_put(frag, copylen), pos, copylen);
                 memcpy(frag->cb, first->cb, sizeof(frag->cb));
                 skb_copy_queue_mapping(frag, first);
+                frag->do_not_encrypt = first->do_not_encrypt;
 
                 pos += copylen;
                 left -= copylen;
@@ -852,7 +853,7 @@ __ieee80211_parse_tx_radiotap(struct ieee80211_tx_data *tx,
 
         sband = tx->local->hw.wiphy->bands[tx->channel->band];
 
-        info->flags |= IEEE80211_TX_CTL_DO_NOT_ENCRYPT;
+        skb->do_not_encrypt = 1;
         info->flags |= IEEE80211_TX_CTL_INJECTED;
         tx->flags &= ~IEEE80211_TX_FRAGMENTED;
 
@@ -925,8 +926,7 @@ __ieee80211_parse_tx_radiotap(struct ieee80211_tx_data *tx,
                                 skb_trim(skb, skb->len - FCS_LEN);
                         }
                         if (*iterator.this_arg & IEEE80211_RADIOTAP_F_WEP)
-                                info->flags &=
-                                        ~IEEE80211_TX_CTL_DO_NOT_ENCRYPT;
+                                tx->skb->do_not_encrypt = 0;
                         if (*iterator.this_arg & IEEE80211_RADIOTAP_F_FRAG)
                                 tx->flags |= IEEE80211_TX_FRAGMENTED;
                         break;
@@ -1042,10 +1042,9 @@ static int ieee80211_tx_prepare(struct ieee80211_tx_data *tx,
                                 struct sk_buff *skb,
                                 struct net_device *mdev)
 {
-        struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
         struct net_device *dev;
 
-        dev = dev_get_by_index(&init_net, info->control.ifindex);
+        dev = dev_get_by_index(&init_net, skb->iif);
         if (unlikely(dev && !is_ieee80211_device(dev, mdev))) {
                 dev_put(dev);
                 dev = NULL;
@@ -1306,8 +1305,8 @@ int ieee80211_master_start_xmit(struct sk_buff *skb,
         bool may_encrypt;
         int ret;
 
-        if (info->control.ifindex)
-                odev = dev_get_by_index(&init_net, info->control.ifindex);
+        if (skb->iif)
+                odev = dev_get_by_index(&init_net, skb->iif);
         if (unlikely(odev && !is_ieee80211_device(odev, dev))) {
                 dev_put(odev);
                 odev = NULL;
@@ -1321,9 +1320,13 @@ int ieee80211_master_start_xmit(struct sk_buff *skb,
                 return 0;
         }
 
+        memset(info, 0, sizeof(*info));
+
+        info->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS;
+
         osdata = IEEE80211_DEV_TO_SUB_IF(odev);
 
-        may_encrypt = !(info->flags & IEEE80211_TX_CTL_DO_NOT_ENCRYPT);
+        may_encrypt = !skb->do_not_encrypt;
 
         headroom = osdata->local->tx_headroom;
         if (may_encrypt)
@@ -1348,7 +1351,6 @@ int ieee80211_monitor_start_xmit(struct sk_buff *skb,
                                  struct net_device *dev)
 {
         struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
-        struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
         struct ieee80211_radiotap_header *prthdr =
                 (struct ieee80211_radiotap_header *)skb->data;
         u16 len_rthdr;
@@ -1371,11 +1373,11 @@ int ieee80211_monitor_start_xmit(struct sk_buff *skb,
         skb->dev = local->mdev;
 
         /* needed because we set skb device to master */
-        info->control.ifindex = dev->ifindex;
+        skb->iif = dev->ifindex;
 
-        info->flags |= IEEE80211_TX_CTL_DO_NOT_ENCRYPT;
-        /* Interfaces should always request a status report */
-        info->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS;
+        /* sometimes we do encrypt injected frames, will be fixed
+         * up in radiotap parser if not wanted */
+        skb->do_not_encrypt = 0;
 
         /*
          * fix up the pointers accounting for the radiotap
@@ -1419,7 +1421,6 @@ int ieee80211_subif_start_xmit(struct sk_buff *skb,
                                struct net_device *dev)
 {
         struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
-        struct ieee80211_tx_info *info;
         struct ieee80211_sub_if_data *sdata;
         int ret = 1, head_need;
         u16 ethertype, hdrlen,  meshhdrlen = 0;
@@ -1645,14 +1646,7 @@ int ieee80211_subif_start_xmit(struct sk_buff *skb,
         nh_pos += hdrlen;
         h_pos += hdrlen;
 
-        info = IEEE80211_SKB_CB(skb);
-        memset(info, 0, sizeof(*info));
-        info->control.ifindex = dev->ifindex;
-        if (ethertype == ETH_P_PAE)
-                info->flags |= IEEE80211_TX_CTL_EAPOL_FRAME;
-
-        /* Interfaces should always request a status report */
-        info->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS;
+        skb->iif = dev->ifindex;
 
         skb->dev = local->mdev;
         dev->stats.tx_packets++;
@@ -1922,6 +1916,8 @@ struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw,
 
         info = IEEE80211_SKB_CB(skb);
 
+        skb->do_not_encrypt = 1;
+
         info->band = band;
         rate_control_get_rate(local->mdev, sband, skb, &rsel);
 
@@ -1931,7 +1927,7 @@ struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw,
                                "no rate found\n",
                                wiphy_name(local->hw.wiphy));
                 }
-                dev_kfree_skb(skb);
+                dev_kfree_skb_any(skb);
                 skb = NULL;
                 goto out;
         }
@@ -1940,7 +1936,6 @@ struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw,
         info->tx_rate_idx = rsel.rate_idx;
 
         info->flags |= IEEE80211_TX_CTL_NO_ACK;
-        info->flags |= IEEE80211_TX_CTL_DO_NOT_ENCRYPT;
         info->flags |= IEEE80211_TX_CTL_CLEAR_PS_FILT;
         info->flags |= IEEE80211_TX_CTL_ASSIGN_SEQ;
         if (sdata->bss_conf.use_short_preamble &&
diff --git a/net/mac80211/wep.c b/net/mac80211/wep.c
index 872d2fcd1a5b..5c2bf0a3d4db 100644
--- a/net/mac80211/wep.c
+++ b/net/mac80211/wep.c
@@ -31,13 +31,13 @@ int ieee80211_wep_init(struct ieee80211_local *local)
         local->wep_tx_tfm = crypto_alloc_blkcipher("ecb(arc4)", 0,
                                                 CRYPTO_ALG_ASYNC);
         if (IS_ERR(local->wep_tx_tfm))
-                return -ENOMEM;
+                return PTR_ERR(local->wep_tx_tfm);
 
         local->wep_rx_tfm = crypto_alloc_blkcipher("ecb(arc4)", 0,
                                                 CRYPTO_ALG_ASYNC);
         if (IS_ERR(local->wep_rx_tfm)) {
                 crypto_free_blkcipher(local->wep_tx_tfm);
-                return -ENOMEM;
+                return PTR_ERR(local->wep_rx_tfm);
         }
 
         return 0;
diff --git a/net/mac80211/wme.c b/net/mac80211/wme.c
index 07edda0b8a5c..28437f0001db 100644
--- a/net/mac80211/wme.c
+++ b/net/mac80211/wme.c
@@ -188,6 +188,9 @@ int ieee80211_ht_agg_queue_add(struct ieee80211_local *local,
 {
         int i;
 
+        /* XXX: currently broken due to cb/requeue use */
+        return -EPERM;
+
         /* prepare the filter and save it for the SW queue
          * matching the received HW queue */
 
diff --git a/net/netfilter/nf_conntrack_proto_tcp.c b/net/netfilter/nf_conntrack_proto_tcp.c
index 420a10d8eb1e..6f61261888ef 100644
--- a/net/netfilter/nf_conntrack_proto_tcp.c
+++ b/net/netfilter/nf_conntrack_proto_tcp.c
@@ -67,7 +67,8 @@ static const char *const tcp_conntrack_names[] = {
 /* RFC1122 says the R2 limit should be at least 100 seconds.
    Linux uses 15 packets as limit, which corresponds
    to ~13-30min depending on RTO. */
-static unsigned int nf_ct_tcp_timeout_max_retrans __read_mostly =   5 MINS;
+static unsigned int nf_ct_tcp_timeout_max_retrans __read_mostly    =   5 MINS;
+static unsigned int nf_ct_tcp_timeout_unacknowledged __read_mostly =   5 MINS;
 
 static unsigned int tcp_timeouts[TCP_CONNTRACK_MAX] __read_mostly = {
         [TCP_CONNTRACK_SYN_SENT]        = 2 MINS,
@@ -625,8 +626,10 @@ static bool tcp_in_window(const struct nf_conn *ct,
                 swin = win + (sack - ack);
                 if (sender->td_maxwin < swin)
                         sender->td_maxwin = swin;
-                if (after(end, sender->td_end))
+                if (after(end, sender->td_end)) {
                         sender->td_end = end;
+                        sender->flags |= IP_CT_TCP_FLAG_DATA_UNACKNOWLEDGED;
+                }
                 /*
                  * Update receiver data.
                  */
@@ -637,6 +640,8 @@ static bool tcp_in_window(const struct nf_conn *ct,
                         if (win == 0)
                                 receiver->td_maxend++;
                 }
+                if (ack == receiver->td_end)
+                        receiver->flags &= ~IP_CT_TCP_FLAG_DATA_UNACKNOWLEDGED;
 
                 /*
                  * Check retransmissions.
@@ -951,9 +956,16 @@ static int tcp_packet(struct nf_conn *ct,
         if (old_state != new_state
             && new_state == TCP_CONNTRACK_FIN_WAIT)
                 ct->proto.tcp.seen[dir].flags |= IP_CT_TCP_FLAG_CLOSE_INIT;
-        timeout = ct->proto.tcp.retrans >= nf_ct_tcp_max_retrans
-                  && tcp_timeouts[new_state] > nf_ct_tcp_timeout_max_retrans
-                  ? nf_ct_tcp_timeout_max_retrans : tcp_timeouts[new_state];
+
+        if (ct->proto.tcp.retrans >= nf_ct_tcp_max_retrans &&
+            tcp_timeouts[new_state] > nf_ct_tcp_timeout_max_retrans)
+                timeout = nf_ct_tcp_timeout_max_retrans;
+        else if ((ct->proto.tcp.seen[0].flags | ct->proto.tcp.seen[1].flags) &
+                 IP_CT_TCP_FLAG_DATA_UNACKNOWLEDGED &&
+                 tcp_timeouts[new_state] > nf_ct_tcp_timeout_unacknowledged)
+                timeout = nf_ct_tcp_timeout_unacknowledged;
+        else
+                timeout = tcp_timeouts[new_state];
         write_unlock_bh(&tcp_lock);
 
         nf_conntrack_event_cache(IPCT_PROTOINFO_VOLATILE, skb);
@@ -1236,6 +1248,13 @@ static struct ctl_table tcp_sysctl_table[] = {
                 .proc_handler   = &proc_dointvec_jiffies,
         },
         {
+                .procname       = "nf_conntrack_tcp_timeout_unacknowledged",
+                .data           = &nf_ct_tcp_timeout_unacknowledged,
+                .maxlen         = sizeof(unsigned int),
+                .mode           = 0644,
+                .proc_handler   = &proc_dointvec_jiffies,
+        },
+        {
                 .ctl_name       = NET_NF_CONNTRACK_TCP_LOOSE,
                 .procname       = "nf_conntrack_tcp_loose",
                 .data           = &nf_ct_tcp_loose,
diff --git a/net/netfilter/xt_hashlimit.c b/net/netfilter/xt_hashlimit.c
index 6809af542a2c..d9418a267812 100644
--- a/net/netfilter/xt_hashlimit.c
+++ b/net/netfilter/xt_hashlimit.c
@@ -367,9 +367,7 @@ static void htable_gc(unsigned long htlong)
 
 static void htable_destroy(struct xt_hashlimit_htable *hinfo)
 {
-        /* remove timer, if it is pending */
-        if (timer_pending(&hinfo->timer))
-                del_timer(&hinfo->timer);
+        del_timer_sync(&hinfo->timer);
 
         /* remove proc entry */
         remove_proc_entry(hinfo->pde->name,
diff --git a/net/rfkill/rfkill.c b/net/rfkill/rfkill.c
index 7a560b785097..c6f2f388cb72 100644
--- a/net/rfkill/rfkill.c
+++ b/net/rfkill/rfkill.c
@@ -130,7 +130,6 @@ static void update_rfkill_state(struct rfkill *rfkill)
 
 /**
  * rfkill_toggle_radio - wrapper for toggle_radio hook
- *
  * @rfkill: the rfkill struct to use
  * @force: calls toggle_radio even if cache says it is not needed,
  *      and also makes sure notifications of the state will be
@@ -141,8 +140,8 @@ static void update_rfkill_state(struct rfkill *rfkill)
  * calls and handling all the red tape such as issuing notifications
  * if the call is successful.
  *
- * Note that @force cannot override a (possibly cached) state of
- * RFKILL_STATE_HARD_BLOCKED.  Any device making use of
+ * Note that the @force parameter cannot override a (possibly cached)
+ * state of RFKILL_STATE_HARD_BLOCKED.  Any device making use of
  * RFKILL_STATE_HARD_BLOCKED implements either get_state() or
  * rfkill_force_state(), so the cache either is bypassed or valid.
  *
@@ -150,7 +149,7 @@ static void update_rfkill_state(struct rfkill *rfkill)
  * even if the radio is in RFKILL_STATE_HARD_BLOCKED state, so as to
  * give the driver a hint that it should double-BLOCK the transmitter.
  *
- * Caller must have aquired rfkill_mutex.
+ * Caller must have acquired rfkill->mutex.
  */
 static int rfkill_toggle_radio(struct rfkill *rfkill,
                                 enum rfkill_state state,
@@ -200,12 +199,12 @@ static int rfkill_toggle_radio(struct rfkill *rfkill,
 
 /**
  * rfkill_switch_all - Toggle state of all switches of given type
- * @type: type of interfaces to be affeceted
+ * @type: type of interfaces to be affected
  * @state: the new state
  *
- * This function toggles state of all switches of given type unless
- * a specific switch is claimed by userspace in which case it is
- * left alone.
+ * This function toggles the state of all switches of given type,
+ * unless a specific switch is claimed by userspace (in which case,
+ * that switch is left alone).
  */
 void rfkill_switch_all(enum rfkill_type type, enum rfkill_state state)
 {
@@ -216,8 +215,11 @@ void rfkill_switch_all(enum rfkill_type type, enum rfkill_state state)
         rfkill_states[type] = state;
 
         list_for_each_entry(rfkill, &rfkill_list, node) {
-                if ((!rfkill->user_claim) && (rfkill->type == type))
+                if ((!rfkill->user_claim) && (rfkill->type == type)) {
+                        mutex_lock(&rfkill->mutex);
                         rfkill_toggle_radio(rfkill, state, 0);
+                        mutex_unlock(&rfkill->mutex);
+                }
         }
 
         mutex_unlock(&rfkill_mutex);
@@ -228,7 +230,7 @@ EXPORT_SYMBOL(rfkill_switch_all);
  * rfkill_epo - emergency power off all transmitters
  *
  * This kicks all rfkill devices to RFKILL_STATE_SOFT_BLOCKED, ignoring
- * everything in its path but rfkill_mutex.
+ * everything in its path but rfkill_mutex and rfkill->mutex.
  */
 void rfkill_epo(void)
 {
@@ -236,7 +238,9 @@ void rfkill_epo(void)
 
         mutex_lock(&rfkill_mutex);
         list_for_each_entry(rfkill, &rfkill_list, node) {
+                mutex_lock(&rfkill->mutex);
                 rfkill_toggle_radio(rfkill, RFKILL_STATE_SOFT_BLOCKED, 1);
+                mutex_unlock(&rfkill->mutex);
         }
         mutex_unlock(&rfkill_mutex);
 }
@@ -252,7 +256,12 @@ EXPORT_SYMBOL_GPL(rfkill_epo);
  * a notification by the firmware/hardware of the current *real*
  * state of the radio rfkill switch.
  *
- * It may not be called from an atomic context.
+ * Devices which are subject to external changes on their rfkill
+ * state (such as those caused by a hardware rfkill line) MUST
+ * have their driver arrange to call rfkill_force_state() as soon
+ * as possible after such a change.
+ *
+ * This function may not be called from an atomic context.
  */
 int rfkill_force_state(struct rfkill *rfkill, enum rfkill_state state)
 {
@@ -367,6 +376,9 @@ static ssize_t rfkill_claim_store(struct device *dev,
         if (!capable(CAP_NET_ADMIN))
                 return -EPERM;
 
+        if (rfkill->user_claim_unsupported)
+                return -EOPNOTSUPP;
+
         /*
          * Take the global lock to make sure the kernel is not in
          * the middle of rfkill_switch_all
@@ -375,19 +387,17 @@ static ssize_t rfkill_claim_store(struct device *dev,
         if (error)
                 return error;
 
-        if (rfkill->user_claim_unsupported) {
-                error = -EOPNOTSUPP;
-                goto out_unlock;
-        }
         if (rfkill->user_claim != claim) {
-                if (!claim)
+                if (!claim) {
+                        mutex_lock(&rfkill->mutex);
                         rfkill_toggle_radio(rfkill,
                                             rfkill_states[rfkill->type],
                                             0);
+                        mutex_unlock(&rfkill->mutex);
+                }
                 rfkill->user_claim = claim;
         }
 
-out_unlock:
         mutex_unlock(&rfkill_mutex);
 
         return error ? error : count;
@@ -516,8 +526,11 @@ static void rfkill_remove_switch(struct rfkill *rfkill)
 {
         mutex_lock(&rfkill_mutex);
         list_del_init(&rfkill->node);
-        rfkill_toggle_radio(rfkill, RFKILL_STATE_SOFT_BLOCKED, 1);
         mutex_unlock(&rfkill_mutex);
+
+        mutex_lock(&rfkill->mutex);
+        rfkill_toggle_radio(rfkill, RFKILL_STATE_SOFT_BLOCKED, 1);
+        mutex_unlock(&rfkill->mutex);
 }
 
 /**
@@ -526,9 +539,10 @@ static void rfkill_remove_switch(struct rfkill *rfkill)
  * @type: type of the switch (RFKILL_TYPE_*)
  *
  * This function should be called by the network driver when it needs
- * rfkill structure. Once the structure is allocated the driver shoud
- * finish its initialization by setting name, private data, enable_radio
+ * rfkill structure.  Once the structure is allocated the driver should
+ * finish its initialization by setting the name, private data, enable_radio
  * and disable_radio methods and then register it with rfkill_register().
+ *
  * NOTE: If registration fails the structure shoudl be freed by calling
  * rfkill_free() otherwise rfkill_unregister() should be used.
  */
@@ -560,7 +574,7 @@ EXPORT_SYMBOL(rfkill_allocate);
  * rfkill_free - Mark rfkill structure for deletion
  * @rfkill: rfkill structure to be destroyed
  *
- * Decrements reference count of rfkill structure so it is destroyed.
+ * Decrements reference count of the rfkill structure so it is destroyed.
  * Note that rfkill_free() should _not_ be called after rfkill_unregister().
  */
 void rfkill_free(struct rfkill *rfkill)
@@ -585,8 +599,10 @@ static void rfkill_led_trigger_register(struct rfkill *rfkill)
 static void rfkill_led_trigger_unregister(struct rfkill *rfkill)
 {
 #ifdef CONFIG_RFKILL_LEDS
-        if (rfkill->led_trigger.name)
+        if (rfkill->led_trigger.name) {
                 led_trigger_unregister(&rfkill->led_trigger);
+                rfkill->led_trigger.name = NULL;
+        }
 #endif
 }
 
@@ -622,8 +638,8 @@ int rfkill_register(struct rfkill *rfkill)
 
         error = device_add(dev);
         if (error) {
-                rfkill_led_trigger_unregister(rfkill);
                 rfkill_remove_switch(rfkill);
+                rfkill_led_trigger_unregister(rfkill);
                 return error;
         }
 
diff --git a/net/sched/sch_api.c b/net/sched/sch_api.c
index b0601642e227..4840aff47256 100644
--- a/net/sched/sch_api.c
+++ b/net/sched/sch_api.c
@@ -572,44 +572,21 @@ static u32 qdisc_alloc_handle(struct net_device *dev)
 static struct Qdisc *dev_graft_qdisc(struct netdev_queue *dev_queue,
                                      struct Qdisc *qdisc)
 {
+        struct Qdisc *oqdisc = dev_queue->qdisc_sleeping;
         spinlock_t *root_lock;
-        struct Qdisc *oqdisc;
-        int ingress;
-
-        ingress = 0;
-        if (qdisc && qdisc->flags&TCQ_F_INGRESS)
-                ingress = 1;
-
-        if (ingress) {
-                oqdisc = dev_queue->qdisc;
-        } else {
-                oqdisc = dev_queue->qdisc_sleeping;
-        }
 
         root_lock = qdisc_root_lock(oqdisc);
         spin_lock_bh(root_lock);
 
-        if (ingress) {
-                /* Prune old scheduler */
-                if (oqdisc && atomic_read(&oqdisc->refcnt) <= 1) {
-                        /* delete */
-                        qdisc_reset(oqdisc);
-                        dev_queue->qdisc = NULL;
-                } else {  /* new */
-                        dev_queue->qdisc = qdisc;
-                }
+        /* Prune old scheduler */
+        if (oqdisc && atomic_read(&oqdisc->refcnt) <= 1)
+                qdisc_reset(oqdisc);
 
-        } else {
-                /* Prune old scheduler */
-                if (oqdisc && atomic_read(&oqdisc->refcnt) <= 1)
-                        qdisc_reset(oqdisc);
-
-                /* ... and graft new one */
-                if (qdisc == NULL)
-                        qdisc = &noop_qdisc;
-                dev_queue->qdisc_sleeping = qdisc;
-                dev_queue->qdisc = &noop_qdisc;
-        }
+        /* ... and graft new one */
+        if (qdisc == NULL)
+                qdisc = &noop_qdisc;
+        dev_queue->qdisc_sleeping = qdisc;
+        dev_queue->qdisc = &noop_qdisc;
 
         spin_unlock_bh(root_lock);
 
@@ -678,7 +655,8 @@ static int qdisc_graft(struct net_device *dev, struct Qdisc *parent,
 
                 ingress = 0;
                 num_q = dev->num_tx_queues;
-                if (q && q->flags & TCQ_F_INGRESS) {
+                if ((q && q->flags & TCQ_F_INGRESS) ||
+                    (new && new->flags & TCQ_F_INGRESS)) {
                         num_q = 1;
                         ingress = 1;
                 }
@@ -692,13 +670,10 @@ static int qdisc_graft(struct net_device *dev, struct Qdisc *parent,
                         if (!ingress)
                                 dev_queue = netdev_get_tx_queue(dev, i);
 
-                        if (ingress) {
-                                old = dev_graft_qdisc(dev_queue, q);
-                        } else {
-                                old = dev_graft_qdisc(dev_queue, new);
-                                if (new && i > 0)
-                                        atomic_inc(&new->refcnt);
-                        }
+                        old = dev_graft_qdisc(dev_queue, new);
+                        if (new && i > 0)
+                                atomic_inc(&new->refcnt);
+
                         notify_and_destroy(skb, n, classid, old, new);
                 }
 
@@ -817,7 +792,7 @@ qdisc_create(struct net_device *dev, struct netdev_queue *dev_queue,
                                 goto err_out3;
                         }
                 }
-                if (parent)
+                if (parent && !(sch->flags & TCQ_F_INGRESS))
                         list_add_tail(&sch->list, &dev_queue->qdisc->list);
 
                 return sch;
diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c
index fd2a6cadb115..9c9cd4d94890 100644
--- a/net/sched/sch_generic.c
+++ b/net/sched/sch_generic.c
@@ -135,7 +135,8 @@ static inline int qdisc_restart(struct Qdisc *q)
         txq = netdev_get_tx_queue(dev, skb_get_queue_mapping(skb));
 
         HARD_TX_LOCK(dev, txq, smp_processor_id());
-        if (!netif_subqueue_stopped(dev, skb))
+        if (!netif_tx_queue_stopped(txq) &&
+            !netif_tx_queue_frozen(txq))
                 ret = dev_hard_start_xmit(skb, dev, txq);
         HARD_TX_UNLOCK(dev, txq);
 
@@ -162,7 +163,8 @@ static inline int qdisc_restart(struct Qdisc *q)
                 break;
         }
 
-        if (ret && netif_tx_queue_stopped(txq))
+        if (ret && (netif_tx_queue_stopped(txq) ||
+                    netif_tx_queue_frozen(txq)))
                 ret = 0;
 
         return ret;
@@ -596,7 +598,7 @@ static void transition_one_qdisc(struct net_device *dev,
         int *need_watchdog_p = _need_watchdog;
 
         rcu_assign_pointer(dev_queue->qdisc, new_qdisc);
-        if (new_qdisc != &noqueue_qdisc)
+        if (need_watchdog_p && new_qdisc != &noqueue_qdisc)
                 *need_watchdog_p = 1;
 }
 
@@ -619,6 +621,7 @@ void dev_activate(struct net_device *dev)
 
         need_watchdog = 0;
         netdev_for_each_tx_queue(dev, transition_one_qdisc, &need_watchdog);
+        transition_one_qdisc(dev, &dev->rx_queue, NULL);
 
         if (need_watchdog) {
                 dev->trans_start = jiffies;
@@ -677,6 +680,7 @@ void dev_deactivate(struct net_device *dev)
         bool running;
 
         netdev_for_each_tx_queue(dev, dev_deactivate_queue, &noop_qdisc);
+        dev_deactivate_queue(dev, &dev->rx_queue, &noop_qdisc);
 
         dev_watchdog_down(dev);
 
@@ -718,7 +722,7 @@ static void dev_init_scheduler_queue(struct net_device *dev,
 void dev_init_scheduler(struct net_device *dev)
 {
         netdev_for_each_tx_queue(dev, dev_init_scheduler_queue, &noop_qdisc);
-        dev_init_scheduler_queue(dev, &dev->rx_queue, NULL);
+        dev_init_scheduler_queue(dev, &dev->rx_queue, &noop_qdisc);
 
         setup_timer(&dev->watchdog_timer, dev_watchdog, (unsigned long)dev);
 }
@@ -745,6 +749,6 @@ static void shutdown_scheduler_queue(struct net_device *dev,
 void dev_shutdown(struct net_device *dev)
 {
         netdev_for_each_tx_queue(dev, shutdown_scheduler_queue, &noop_qdisc);
-        shutdown_scheduler_queue(dev, &dev->rx_queue, NULL);
+        shutdown_scheduler_queue(dev, &dev->rx_queue, &noop_qdisc);
         WARN_ON(timer_pending(&dev->watchdog_timer));
 }
diff --git a/net/sched/sch_teql.c b/net/sched/sch_teql.c
index 537223642b6e..2c35c678563b 100644
--- a/net/sched/sch_teql.c
+++ b/net/sched/sch_teql.c
@@ -305,10 +305,11 @@ restart:
 
                 switch (teql_resolve(skb, skb_res, slave)) {
                 case 0:
-                        if (netif_tx_trylock(slave)) {
-                                if (!__netif_subqueue_stopped(slave, subq) &&
+                        if (__netif_tx_trylock(slave_txq)) {
+                                if (!netif_tx_queue_stopped(slave_txq) &&
+                                    !netif_tx_queue_frozen(slave_txq) &&
                                     slave->hard_start_xmit(skb, slave) == 0) {
-                                        netif_tx_unlock(slave);
+                                        __netif_tx_unlock(slave_txq);
                                         master->slaves = NEXT_SLAVE(q);
                                         netif_wake_queue(dev);
                                         master->stats.tx_packets++;
@@ -316,7 +317,7 @@ restart:
                                                 qdisc_pkt_len(skb);
                                         return 0;
                                 }
-                                netif_tx_unlock(slave);
+                                __netif_tx_unlock(slave_txq);
                         }
                         if (netif_queue_stopped(dev))
                                 busy = 1;
diff --git a/net/sunrpc/svc.c b/net/sunrpc/svc.c
index 835d27413083..5a32cb7c4bb4 100644
--- a/net/sunrpc/svc.c
+++ b/net/sunrpc/svc.c
@@ -310,8 +310,7 @@ svc_pool_map_set_cpumask(struct task_struct *task, unsigned int pidx)
         switch (m->mode) {
         case SVC_POOL_PERCPU:
         {
-                cpumask_of_cpu_ptr(cpumask, node);
-                set_cpus_allowed_ptr(task, cpumask);
+                set_cpus_allowed_ptr(task, &cpumask_of_cpu(node));
                 break;
         }
         case SVC_POOL_PERNODE:
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index b7fefffd2d0d..59eb2cf42e5f 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -29,16 +29,16 @@ static struct genl_family nl80211_fam = {
 };
 
 /* internal helper: get drv and dev */
-static int get_drv_dev_by_info_ifindex(struct genl_info *info,
+static int get_drv_dev_by_info_ifindex(struct nlattr **attrs,
                                        struct cfg80211_registered_device **drv,
                                        struct net_device **dev)
 {
         int ifindex;
 
-        if (!info->attrs[NL80211_ATTR_IFINDEX])
+        if (!attrs[NL80211_ATTR_IFINDEX])
                 return -EINVAL;
 
-        ifindex = nla_get_u32(info->attrs[NL80211_ATTR_IFINDEX]);
+        ifindex = nla_get_u32(attrs[NL80211_ATTR_IFINDEX]);
         *dev = dev_get_by_index(&init_net, ifindex);
         if (!*dev)
                 return -ENODEV;
@@ -291,21 +291,31 @@ static int nl80211_dump_interface(struct sk_buff *skb, struct netlink_callback *
 
         mutex_lock(&cfg80211_drv_mutex);
         list_for_each_entry(dev, &cfg80211_drv_list, list) {
-                if (++wp_idx < wp_start)
+                if (wp_idx < wp_start) {
+                        wp_idx++;
                         continue;
+                }
                 if_idx = 0;
 
                 mutex_lock(&dev->devlist_mtx);
                 list_for_each_entry(wdev, &dev->netdev_list, list) {
-                        if (++if_idx < if_start)
+                        if (if_idx < if_start) {
+                                if_idx++;
                                 continue;
+                        }
                         if (nl80211_send_iface(skb, NETLINK_CB(cb->skb).pid,
                                                cb->nlh->nlmsg_seq, NLM_F_MULTI,
-                                               wdev->netdev) < 0)
-                                break;
+                                               wdev->netdev) < 0) {
+                                mutex_unlock(&dev->devlist_mtx);
+                                goto out;
+                        }
+                        if_idx++;
                 }
                 mutex_unlock(&dev->devlist_mtx);
+
+                wp_idx++;
         }
+ out:
         mutex_unlock(&cfg80211_drv_mutex);
 
         cb->args[0] = wp_idx;
@@ -321,7 +331,7 @@ static int nl80211_get_interface(struct sk_buff *skb, struct genl_info *info)
         struct net_device *netdev;
         int err;
 
-        err = get_drv_dev_by_info_ifindex(info, &dev, &netdev);
+        err = get_drv_dev_by_info_ifindex(info->attrs, &dev, &netdev);
         if (err)
                 return err;
 
@@ -392,7 +402,7 @@ static int nl80211_set_interface(struct sk_buff *skb, struct genl_info *info)
         } else
                 return -EINVAL;
 
-        err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+        err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
         if (err)
                 return err;
         ifindex = dev->ifindex;
@@ -477,7 +487,7 @@ static int nl80211_del_interface(struct sk_buff *skb, struct genl_info *info)
         int ifindex, err;
         struct net_device *dev;
 
-        err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+        err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
         if (err)
                 return err;
         ifindex = dev->ifindex;
@@ -545,7 +555,7 @@ static int nl80211_get_key(struct sk_buff *skb, struct genl_info *info)
         if (info->attrs[NL80211_ATTR_MAC])
                 mac_addr = nla_data(info->attrs[NL80211_ATTR_MAC]);
 
-        err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+        err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
         if (err)
                 return err;
 
@@ -618,7 +628,7 @@ static int nl80211_set_key(struct sk_buff *skb, struct genl_info *info)
         if (!info->attrs[NL80211_ATTR_KEY_DEFAULT])
                 return -EINVAL;
 
-        err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+        err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
         if (err)
                 return err;
 
@@ -699,7 +709,7 @@ static int nl80211_new_key(struct sk_buff *skb, struct genl_info *info)
                 return -EINVAL;
         }
 
-        err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+        err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
         if (err)
                 return err;
 
@@ -735,7 +745,7 @@ static int nl80211_del_key(struct sk_buff *skb, struct genl_info *info)
         if (info->attrs[NL80211_ATTR_MAC])
                 mac_addr = nla_data(info->attrs[NL80211_ATTR_MAC]);
 
-        err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+        err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
         if (err)
                 return err;
 
@@ -764,7 +774,7 @@ static int nl80211_addset_beacon(struct sk_buff *skb, struct genl_info *info)
         struct beacon_parameters params;
         int haveinfo = 0;
 
-        err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+        err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
         if (err)
                 return err;
 
@@ -843,7 +853,7 @@ static int nl80211_del_beacon(struct sk_buff *skb, struct genl_info *info)
         int err;
         struct net_device *dev;
 
-        err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+        err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
         if (err)
                 return err;
 
@@ -937,67 +947,78 @@ static int nl80211_send_station(struct sk_buff *msg, u32 pid, u32 seq,
 }
 
 static int nl80211_dump_station(struct sk_buff *skb,
-                struct netlink_callback *cb)
+                                struct netlink_callback *cb)
 {
-        int wp_idx = 0;
-        int if_idx = 0;
-        int sta_idx = cb->args[2];
-        int wp_start = cb->args[0];
-        int if_start = cb->args[1];
         struct station_info sinfo;
         struct cfg80211_registered_device *dev;
-        struct wireless_dev *wdev;
+        struct net_device *netdev;
         u8 mac_addr[ETH_ALEN];
+        int ifidx = cb->args[0];
+        int sta_idx = cb->args[1];
         int err;
-        int exit = 0;
 
-        /* TODO: filter by device */
-        mutex_lock(&cfg80211_drv_mutex);
-        list_for_each_entry(dev, &cfg80211_drv_list, list) {
-                if (exit)
+        if (!ifidx) {
+                err = nlmsg_parse(cb->nlh, GENL_HDRLEN + nl80211_fam.hdrsize,
+                                  nl80211_fam.attrbuf, nl80211_fam.maxattr,
+                                  nl80211_policy);
+                if (err)
+                        return err;
+
+                if (!nl80211_fam.attrbuf[NL80211_ATTR_IFINDEX])
+                        return -EINVAL;
+
+                ifidx = nla_get_u32(nl80211_fam.attrbuf[NL80211_ATTR_IFINDEX]);
+                if (!ifidx)
+                        return -EINVAL;
+        }
+
+        netdev = dev_get_by_index(&init_net, ifidx);
+        if (!netdev)
+                return -ENODEV;
+
+        dev = cfg80211_get_dev_from_ifindex(ifidx);
+        if (IS_ERR(dev)) {
+                err = PTR_ERR(dev);
+                goto out_put_netdev;
+        }
+
+        if (!dev->ops->dump_station) {
+                err = -ENOSYS;
+                goto out_err;
+        }
+
+        rtnl_lock();
+
+        while (1) {
+                err = dev->ops->dump_station(&dev->wiphy, netdev, sta_idx,
+                                             mac_addr, &sinfo);
+                if (err == -ENOENT)
                         break;
-                if (++wp_idx < wp_start)
-                        continue;
-                if_idx = 0;
+                if (err)
+                        goto out_err_rtnl;
 
-                mutex_lock(&dev->devlist_mtx);
-                list_for_each_entry(wdev, &dev->netdev_list, list) {
-                        if (exit)
-                                break;
-                        if (++if_idx < if_start)
-                                continue;
-                        if (!dev->ops->dump_station)
-                                continue;
+                if (nl80211_send_station(skb,
+                                NETLINK_CB(cb->skb).pid,
+                                cb->nlh->nlmsg_seq, NLM_F_MULTI,
+                                netdev, mac_addr,
+                                &sinfo) < 0)
+                        goto out;
 
-                        for (;; ++sta_idx) {
-                                rtnl_lock();
-                                err = dev->ops->dump_station(&dev->wiphy,
-                                                wdev->netdev, sta_idx, mac_addr,
-                                                &sinfo);
-                                rtnl_unlock();
-                                if (err) {
-                                        sta_idx = 0;
-                                        break;
-                                }
-                                if (nl80211_send_station(skb,
-                                                NETLINK_CB(cb->skb).pid,
-                                                cb->nlh->nlmsg_seq, NLM_F_MULTI,
-                                                wdev->netdev, mac_addr,
-                                                &sinfo) < 0) {
-                                        exit = 1;
-                                        break;
-                                }
-                        }
-                }
-                mutex_unlock(&dev->devlist_mtx);
+                sta_idx++;
         }
-        mutex_unlock(&cfg80211_drv_mutex);
 
-        cb->args[0] = wp_idx;
-        cb->args[1] = if_idx;
-        cb->args[2] = sta_idx;
 
-        return skb->len;
+ out:
+        cb->args[1] = sta_idx;
+        err = skb->len;
+ out_err_rtnl:
+        rtnl_unlock();
+ out_err:
+        cfg80211_put_dev(dev);
+ out_put_netdev:
+        dev_put(netdev);
+
+        return err;
 }
 
 static int nl80211_get_station(struct sk_buff *skb, struct genl_info *info)
@@ -1016,7 +1037,7 @@ static int nl80211_get_station(struct sk_buff *skb, struct genl_info *info)
 
         mac_addr = nla_data(info->attrs[NL80211_ATTR_MAC]);
 
-        err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+        err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
         if (err)
                 return err;
 
@@ -1112,7 +1133,7 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info)
                 params.plink_action =
                     nla_get_u8(info->attrs[NL80211_ATTR_STA_PLINK_ACTION]);
 
-        err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+        err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
         if (err)
                 return err;
 
@@ -1172,7 +1193,7 @@ static int nl80211_new_station(struct sk_buff *skb, struct genl_info *info)
                                 &params.station_flags))
                 return -EINVAL;
 
-        err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+        err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
         if (err)
                 return err;
 
@@ -1207,7 +1228,7 @@ static int nl80211_del_station(struct sk_buff *skb, struct genl_info *info)
         if (info->attrs[NL80211_ATTR_MAC])
                 mac_addr = nla_data(info->attrs[NL80211_ATTR_MAC]);
 
-        err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+        err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
         if (err)
                 return err;
 
@@ -1277,68 +1298,78 @@ static int nl80211_send_mpath(struct sk_buff *msg, u32 pid, u32 seq,
 }
 
 static int nl80211_dump_mpath(struct sk_buff *skb,
-                struct netlink_callback *cb)
+                              struct netlink_callback *cb)
 {
-        int wp_idx = 0;
-        int if_idx = 0;
-        int sta_idx = cb->args[2];
-        int wp_start = cb->args[0];
-        int if_start = cb->args[1];
         struct mpath_info pinfo;
         struct cfg80211_registered_device *dev;
-        struct wireless_dev *wdev;
+        struct net_device *netdev;
         u8 dst[ETH_ALEN];
         u8 next_hop[ETH_ALEN];
+        int ifidx = cb->args[0];
+        int path_idx = cb->args[1];
         int err;
-        int exit = 0;
 
-        /* TODO: filter by device */
-        mutex_lock(&cfg80211_drv_mutex);
-        list_for_each_entry(dev, &cfg80211_drv_list, list) {
-                if (exit)
+        if (!ifidx) {
+                err = nlmsg_parse(cb->nlh, GENL_HDRLEN + nl80211_fam.hdrsize,
+                                  nl80211_fam.attrbuf, nl80211_fam.maxattr,
+                                  nl80211_policy);
+                if (err)
+                        return err;
+
+                if (!nl80211_fam.attrbuf[NL80211_ATTR_IFINDEX])
+                        return -EINVAL;
+
+                ifidx = nla_get_u32(nl80211_fam.attrbuf[NL80211_ATTR_IFINDEX]);
+                if (!ifidx)
+                        return -EINVAL;
+        }
+
+        netdev = dev_get_by_index(&init_net, ifidx);
+        if (!netdev)
+                return -ENODEV;
+
+        dev = cfg80211_get_dev_from_ifindex(ifidx);
+        if (IS_ERR(dev)) {
+                err = PTR_ERR(dev);
+                goto out_put_netdev;
+        }
+
+        if (!dev->ops->dump_mpath) {
+                err = -ENOSYS;
+                goto out_err;
+        }
+
+        rtnl_lock();
+
+        while (1) {
+                err = dev->ops->dump_mpath(&dev->wiphy, netdev, path_idx,
+                                           dst, next_hop, &pinfo);
+                if (err == -ENOENT)
                         break;
-                if (++wp_idx < wp_start)
-                        continue;
-                if_idx = 0;
+                if (err)
+                        goto out_err_rtnl;
 
-                mutex_lock(&dev->devlist_mtx);
-                list_for_each_entry(wdev, &dev->netdev_list, list) {
-                        if (exit)
-                                break;
-                        if (++if_idx < if_start)
-                                continue;
-                        if (!dev->ops->dump_mpath)
-                                continue;
+                if (nl80211_send_mpath(skb, NETLINK_CB(cb->skb).pid,
+                                       cb->nlh->nlmsg_seq, NLM_F_MULTI,
+                                       netdev, dst, next_hop,
+                                       &pinfo) < 0)
+                        goto out;
 
-                        for (;; ++sta_idx) {
-                                rtnl_lock();
-                                err = dev->ops->dump_mpath(&dev->wiphy,
-                                                wdev->netdev, sta_idx, dst,
-                                                next_hop, &pinfo);
-                                rtnl_unlock();
-                                if (err) {
-                                        sta_idx = 0;
-                                        break;
-                                }
-                                if (nl80211_send_mpath(skb,
-                                                NETLINK_CB(cb->skb).pid,
-                                                cb->nlh->nlmsg_seq, NLM_F_MULTI,
-                                                wdev->netdev, dst, next_hop,
-                                                &pinfo) < 0) {
-                                        exit = 1;
-                                        break;
-                                }
-                        }
-                }
-                mutex_unlock(&dev->devlist_mtx);
+                path_idx++;
         }
-        mutex_unlock(&cfg80211_drv_mutex);
 
-        cb->args[0] = wp_idx;
-        cb->args[1] = if_idx;
-        cb->args[2] = sta_idx;
 
-        return skb->len;
+ out:
+        cb->args[1] = path_idx;
+        err = skb->len;
+ out_err_rtnl:
+        rtnl_unlock();
+ out_err:
+        cfg80211_put_dev(dev);
+ out_put_netdev:
+        dev_put(netdev);
+
+        return err;
 }
 
 static int nl80211_get_mpath(struct sk_buff *skb, struct genl_info *info)
@@ -1358,7 +1389,7 @@ static int nl80211_get_mpath(struct sk_buff *skb, struct genl_info *info)
 
         dst = nla_data(info->attrs[NL80211_ATTR_MAC]);
 
-        err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+        err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
         if (err)
                 return err;
 
@@ -1411,7 +1442,7 @@ static int nl80211_set_mpath(struct sk_buff *skb, struct genl_info *info)
         dst = nla_data(info->attrs[NL80211_ATTR_MAC]);
         next_hop = nla_data(info->attrs[NL80211_ATTR_MPATH_NEXT_HOP]);
 
-        err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+        err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
         if (err)
                 return err;
 
@@ -1446,7 +1477,7 @@ static int nl80211_new_mpath(struct sk_buff *skb, struct genl_info *info)
         dst = nla_data(info->attrs[NL80211_ATTR_MAC]);
         next_hop = nla_data(info->attrs[NL80211_ATTR_MPATH_NEXT_HOP]);
 
-        err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+        err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
         if (err)
                 return err;
 
@@ -1475,7 +1506,7 @@ static int nl80211_del_mpath(struct sk_buff *skb, struct genl_info *info)
         if (info->attrs[NL80211_ATTR_MAC])
                 dst = nla_data(info->attrs[NL80211_ATTR_MAC]);
 
-        err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+        err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
         if (err)
                 return err;
 
diff --git a/scripts/genksyms/genksyms.c b/scripts/genksyms/genksyms.c
index 4f8a3007e457..c249274e005a 100644
--- a/scripts/genksyms/genksyms.c
+++ b/scripts/genksyms/genksyms.c
@@ -545,6 +545,8 @@ int main(int argc, char **argv)
                         }
                         fputs(sym->name, dumpfile);
                         putc(' ', dumpfile);
+                        if (sym->is_extern)
+                                fputs("extern ", dumpfile);
                         print_list(dumpfile, sym->defn);
                         putc('\n', dumpfile);
 
diff --git a/scripts/genksyms/lex.c_shipped b/scripts/genksyms/lex.c_shipped
index 2a176988d468..2ac23bcca5b5 100644
--- a/scripts/genksyms/lex.c_shipped
+++ b/scripts/genksyms/lex.c_shipped
@@ -6,10 +6,19 @@
 
 /* A lexical scanner generated by flex */
 
+/* %not-for-header */
+
+/* %if-c-only */
+/* %if-not-reentrant */
+
+/* %endif */
+/* %endif */
+/* %ok-for-header */
+
 #define FLEX_SCANNER
 #define YY_FLEX_MAJOR_VERSION 2
 #define YY_FLEX_MINOR_VERSION 5
-#define YY_FLEX_SUBMINOR_VERSION 33
+#define YY_FLEX_SUBMINOR_VERSION 35
 #if YY_FLEX_SUBMINOR_VERSION > 0
 #define FLEX_BETA
 #endif
@@ -47,7 +56,7 @@
 
 /* C99 systems have <inttypes.h>. Non-C99 systems may or may not. */
 
-#if __STDC_VERSION__ >= 199901L
+#if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L
 
 /* C99 says to define __STDC_LIMIT_MACROS before including stdint.h,
  * if you want the limit (max/min) macros for int types. 
@@ -70,7 +79,6 @@ typedef int flex_int32_t;
 typedef unsigned char flex_uint8_t; 
 typedef unsigned short int flex_uint16_t;
 typedef unsigned int flex_uint32_t;
-#endif /* ! C99 */
 
 /* Limits of integral types. */
 #ifndef INT8_MIN
@@ -101,6 +109,8 @@ typedef unsigned int flex_uint32_t;
 #define UINT32_MAX             (4294967295U)
 #endif
 
+#endif /* ! C99 */
+
 #endif /* ! FLEXINT_H */
 
 /* %endif */
@@ -115,11 +125,12 @@ typedef unsigned int flex_uint32_t;
 
 #else   /* ! __cplusplus */
 
-#if __STDC__
+/* C99 requires __STDC__ to be defined as 1. */
+#if defined (__STDC__)
 
 #define YY_USE_CONST
 
-#endif  /* __STDC__ */
+#endif  /* defined (__STDC__) */
 #endif  /* ! __cplusplus */
 
 #ifdef YY_USE_CONST
@@ -218,14 +229,9 @@ extern FILE *yyin, *yyout;
 
 #define unput(c) yyunput( c, (yytext_ptr)  )
 
-/* The following is because we cannot portably get our hands on size_t
- * (without autoconf's help, which isn't available because we want
- * flex-generated scanners to compile on their own).
- */
-
 #ifndef YY_TYPEDEF_YY_SIZE_T
 #define YY_TYPEDEF_YY_SIZE_T
-typedef unsigned int yy_size_t;
+typedef size_t yy_size_t;
 #endif
 
 #ifndef YY_STRUCT_YY_BUFFER_STATE
@@ -401,7 +407,7 @@ void yyfree (void *  );
 /* %% [1.0] yytext/yyin/yyout/yy_state_type/yylineno etc. def's & init go here */
 /* Begin user sect3 */
 
-#define yywrap() 1
+#define yywrap(n) 1
 #define YY_SKIP_YYWRAP
 
 #define FLEX_DEBUG
@@ -613,8 +619,8 @@ int yy_flex_debug = 1;
 
 static yyconst flex_int16_t yy_rule_linenum[13] =
     {   0,
-       69,   70,   71,   74,   77,   78,   79,   85,   86,   87,
-       89,   92
+       71,   72,   73,   76,   79,   80,   81,   87,   88,   89,
+       91,   94
     } ;
 
 /* The intent behind this definition is that it'll catch
@@ -665,7 +671,8 @@ char *yytext;
    quite so pedantic.  */
 
 /* We don't do multiple input files.  */
-#line 669 "scripts/genksyms/lex.c"
+#define YY_NO_INPUT 1
+#line 676 "scripts/genksyms/lex.c"
 
 #define INITIAL 0
 #define V2_TOKENS 1
@@ -695,9 +702,39 @@ static int yy_init_globals (void );
 /* %endif */
 /* %if-reentrant */
 /* %endif */
+/* %endif End reentrant structures and macros. */
+
+/* Accessor methods to globals.
+   These are made visible to non-reentrant scanners for convenience. */
+
+int yylex_destroy (void );
+
+int yyget_debug (void );
+
+void yyset_debug (int debug_flag  );
+
+YY_EXTRA_TYPE yyget_extra (void );
+
+void yyset_extra (YY_EXTRA_TYPE user_defined  );
+
+FILE *yyget_in (void );
+
+void yyset_in  (FILE * in_str  );
+
+FILE *yyget_out (void );
+
+void yyset_out  (FILE * out_str  );
+
+int yyget_leng (void );
+
+char *yyget_text (void );
+
+int yyget_lineno (void );
+
+void yyset_lineno (int line_number  );
+
 /* %if-bison-bridge */
 /* %endif */
-/* %endif End reentrant structures and macros. */
 
 /* Macros after this point can all be overridden by user definitions in
  * section 1.
@@ -756,7 +793,7 @@ static int input (void );
 /* This used to be an fputs(), but since the string might contain NUL's,
  * we now use fwrite().
  */
-#define ECHO (void) fwrite( yytext, yyleng, 1, yyout )
+#define ECHO fwrite( yytext, yyleng, 1, yyout )
 /* %endif */
 /* %if-c++-only C++ definition */
 /* %endif */
@@ -881,12 +918,12 @@ YY_DECL
         register int yy_act;
     
 /* %% [7.0] user's declarations go here */
-#line 65 "scripts/genksyms/lex.l"
+#line 67 "scripts/genksyms/lex.l"
 
 
 
  /* Keep track of our location in the original source files.  */
-#line 890 "scripts/genksyms/lex.c"
+#line 927 "scripts/genksyms/lex.c"
 
         if ( !(yy_init) )
                 {
@@ -1004,42 +1041,42 @@ do_action:	/* This label is used only to access EOF actions. */
 case 1:
 /* rule 1 can match eol */
 YY_RULE_SETUP
-#line 69 "scripts/genksyms/lex.l"
+#line 71 "scripts/genksyms/lex.l"
 return FILENAME;
         YY_BREAK
 case 2:
 /* rule 2 can match eol */
 YY_RULE_SETUP
-#line 70 "scripts/genksyms/lex.l"
+#line 72 "scripts/genksyms/lex.l"
 cur_line++;
         YY_BREAK
 case 3:
 /* rule 3 can match eol */
 YY_RULE_SETUP
-#line 71 "scripts/genksyms/lex.l"
+#line 73 "scripts/genksyms/lex.l"
 cur_line++;
         YY_BREAK
 /* Ignore all other whitespace.  */
 case 4:
 YY_RULE_SETUP
-#line 74 "scripts/genksyms/lex.l"
+#line 76 "scripts/genksyms/lex.l"
 ;
         YY_BREAK
 case 5:
 /* rule 5 can match eol */
 YY_RULE_SETUP
-#line 77 "scripts/genksyms/lex.l"
+#line 79 "scripts/genksyms/lex.l"
 return STRING;
         YY_BREAK
 case 6:
 /* rule 6 can match eol */
 YY_RULE_SETUP
-#line 78 "scripts/genksyms/lex.l"
+#line 80 "scripts/genksyms/lex.l"
 return CHAR;
         YY_BREAK
 case 7:
 YY_RULE_SETUP
-#line 79 "scripts/genksyms/lex.l"
+#line 81 "scripts/genksyms/lex.l"
 return IDENT;
         YY_BREAK
 /* The Pedant requires that the other C multi-character tokens be
@@ -1048,36 +1085,36 @@ return IDENT;
     around them properly.  */
 case 8:
 YY_RULE_SETUP
-#line 85 "scripts/genksyms/lex.l"
+#line 87 "scripts/genksyms/lex.l"
 return OTHER;
         YY_BREAK
 case 9:
 YY_RULE_SETUP
-#line 86 "scripts/genksyms/lex.l"
+#line 88 "scripts/genksyms/lex.l"
 return INT;
         YY_BREAK
 case 10:
 YY_RULE_SETUP
-#line 87 "scripts/genksyms/lex.l"
+#line 89 "scripts/genksyms/lex.l"
 return REAL;
         YY_BREAK
 case 11:
 YY_RULE_SETUP
-#line 89 "scripts/genksyms/lex.l"
+#line 91 "scripts/genksyms/lex.l"
 return DOTS;
         YY_BREAK
 /* All other tokens are single characters.  */
 case 12:
 YY_RULE_SETUP
-#line 92 "scripts/genksyms/lex.l"
+#line 94 "scripts/genksyms/lex.l"
 return yytext[0];
         YY_BREAK
 case 13:
 YY_RULE_SETUP
-#line 95 "scripts/genksyms/lex.l"
+#line 97 "scripts/genksyms/lex.l"
 ECHO;
         YY_BREAK
-#line 1081 "scripts/genksyms/lex.c"
+#line 1118 "scripts/genksyms/lex.c"
 case YY_STATE_EOF(INITIAL):
 case YY_STATE_EOF(V2_TOKENS):
         yyterminate();
@@ -1346,6 +1383,14 @@ static int yy_get_next_buffer (void)
         else
                 ret_val = EOB_ACT_CONTINUE_SCAN;
 
+        if ((yy_size_t) ((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) {
+                /* Extend the array by 50%, plus the number we really need. */
+                yy_size_t new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1);
+                YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) yyrealloc((void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf,new_size  );
+                if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf )
+                        YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" );
+        }
+
         (yy_n_chars) += number_to_move;
         YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR;
         YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR;
@@ -1851,7 +1896,9 @@ static void yyensure_buffer_stack (void)
                 (yy_buffer_stack) = (struct yy_buffer_state**)yyalloc
                                                                 (num_to_alloc * sizeof(struct yy_buffer_state*)
                                                                 );
-                
+                if ( ! (yy_buffer_stack) )
+                        YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" );
+                                                                  
                 memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*));
                                 
                 (yy_buffer_stack_max) = num_to_alloc;
@@ -1869,6 +1916,8 @@ static void yyensure_buffer_stack (void)
                                                                 ((yy_buffer_stack),
                                                                 num_to_alloc * sizeof(struct yy_buffer_state*)
                                                                 );
+                if ( ! (yy_buffer_stack) )
+                        YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" );
 
                 /* zero only the new slots.*/
                 memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*));
@@ -2092,7 +2141,7 @@ void yyset_debug (int  bdebug )
 /* %if-reentrant */
 /* %if-bison-bridge */
 /* %endif */
-/* %endif */
+/* %endif if-c-only */
 
 /* %if-c-only */
 static int yy_init_globals (void)
@@ -2124,13 +2173,9 @@ static int yy_init_globals (void)
 }
 /* %endif */
 
-/* %if-c-or-c++ */
-/* %if-c-only */
+/* %if-c-only SNIP! this currently causes conflicts with the c++ scanner */
 /* yylex_destroy is for both reentrant and non-reentrant scanners. */
 int yylex_destroy  (void)
-/* %endif */
-/* %if-c++-only */
-/* %endif */
 {
     
     /* Pop the buffer stack, destroying each element. */
@@ -2144,11 +2189,6 @@ int yylex_destroy  (void)
         yyfree((yy_buffer_stack) );
         (yy_buffer_stack) = NULL;
 
-/* %if-c++-only */
-/* %endif */
-
-/* %if-c-only */
-
     /* Reset the globals. This is important in a non-reentrant scanner so the next time
      * yylex() is called, initialization will occur. */
     yy_init_globals( );
@@ -2156,7 +2196,6 @@ int yylex_destroy  (void)
 /* %if-reentrant */
 /* %endif */
     return 0;
-/* %endif */
 }
 /* %endif */
 
@@ -2213,7 +2252,7 @@ void yyfree (void * ptr )
 
 /* %ok-for-header */
 
-#line 95 "scripts/genksyms/lex.l"
+#line 97 "scripts/genksyms/lex.l"
 
 
 
diff --git a/scripts/genksyms/lex.l b/scripts/genksyms/lex.l
index 5e544a06678b..fe50ff9dacd0 100644
--- a/scripts/genksyms/lex.l
+++ b/scripts/genksyms/lex.l
@@ -62,6 +62,8 @@ MC_TOKEN		([~%^&*+=|<>/-]=)|(&&)|("||")|(->)|(<<)|(>>)
 /* We don't do multiple input files.  */
 %option noyywrap
 
+%option noinput
+
 %%
 
 
diff --git a/scripts/genksyms/parse.c_shipped b/scripts/genksyms/parse.c_shipped
index 3e6079f36b9f..eaee44e66a43 100644
--- a/scripts/genksyms/parse.c_shipped
+++ b/scripts/genksyms/parse.c_shipped
@@ -504,7 +504,7 @@ static const yytype_uint16 yyprhs[] =
      239,   242,   245,   247,   248,   250,   252,   257,   262,   265,
      269,   273,   277,   278,   280,   283,   287,   291,   292,   294,
      296,   299,   303,   306,   307,   309,   311,   315,   318,   321,
-     323,   326,   327,   329,   332,   333,   335
+     323,   326,   327,   330,   333,   334,   336
 };
 
 /* YYRHS -- A `-1'-separated list of the rules' RHS.  */
@@ -542,9 +542,9 @@ static const yytype_int8 yyrhs[] =
       -1,    -1,    89,    -1,    90,    -1,    89,    90,    -1,    64,
       91,    44,    -1,     1,    44,    -1,    -1,    92,    -1,    93,
       -1,    92,    46,    93,    -1,    76,    95,    -1,    37,    94,
-      -1,    94,    -1,    52,    34,    -1,    -1,    31,    -1,    30,
-      44,    -1,    -1,    30,    -1,    29,    47,    37,    49,    44,
-      -1
+      -1,    94,    -1,    52,    34,    -1,    -1,    95,    31,    -1,
+      30,    44,    -1,    -1,    30,    -1,    29,    47,    37,    49,
+      44,    -1
 };
 
 /* YYRLINE[YYN] -- source line where rule number YYN was defined.  */
@@ -647,7 +647,7 @@ static const yytype_uint8 yyr2[] =
        2,     2,     1,     0,     1,     1,     4,     4,     2,     3,
        3,     3,     0,     1,     2,     3,     3,     0,     1,     1,
        2,     3,     2,     0,     1,     1,     3,     2,     2,     1,
-       2,     0,     1,     2,     0,     1,     5
+       2,     0,     2,     2,     0,     1,     5
 };
 
 /* YYDEFACT[STATE-NAME] -- Default rule to reduce with in state
@@ -667,9 +667,9 @@ static const yytype_uint8 yydefact[] =
        0,    66,   125,   101,   121,    71,     0,     7,   112,   106,
       76,    77,     0,     0,     0,   121,    75,     0,   114,   115,
      119,   105,     0,   110,   124,     0,    36,     0,    73,    72,
-      61,    20,   122,   102,     0,    93,     0,    84,    87,    88,
-     118,     0,    76,     0,   120,    74,   117,    80,     0,   111,
-       0,    35,   126,     0,    21,   103,    70,    94,    56,     0,
+      61,    20,   102,     0,    93,     0,    84,    87,    88,   118,
+       0,    76,     0,   120,    74,   117,    80,     0,   111,     0,
+      35,   126,   122,     0,    21,   103,    70,    94,    56,     0,
       93,    90,    92,    69,    83,     0,    82,    81,     0,     0,
      116,   104,     0,    95,     0,    91,    98,     0,    85,    89,
       79,    78,   100,    99,     0,     0,    97,    96
@@ -680,44 +680,44 @@ static const yytype_int16 yydefgoto[] =
 {
       -1,     1,     2,     3,    35,    72,    55,    36,    64,    65,
       66,    75,    38,    39,    40,    41,    42,    67,    86,    87,
-      43,   114,    69,   105,   106,   126,   127,   128,   129,   151,
+      43,   114,    69,   105,   106,   125,   126,   127,   128,   151,
      152,    44,   144,   145,    54,    76,    77,    78,   107,   108,
-     109,   110,   123,    45,    94,    46
+     109,   110,   122,    45,    94,    46
 };
 
 /* YYPACT[STATE-NUM] -- Index in YYTABLE of the portion describing
    STATE-NUM.  */
-#define YYPACT_NINF -135
+#define YYPACT_NINF -134
 static const yytype_int16 yypact[] =
 {
-    -135,    11,  -135,   312,  -135,  -135,    24,  -135,  -135,  -135,
-    -135,  -135,   -23,  -135,    -2,  -135,  -135,  -135,  -135,  -135,
-    -135,  -135,  -135,  -135,   -17,  -135,   -11,  -135,  -135,  -135,
-      -3,    16,    26,  -135,  -135,  -135,  -135,    34,   482,  -135,
-    -135,  -135,  -135,  -135,  -135,  -135,  -135,  -135,  -135,  -135,
-      -8,  -135,    22,    97,  -135,   482,    22,  -135,   482,    56,
-    -135,  -135,    12,    10,    50,    49,  -135,    34,   -13,    15,
-    -135,  -135,   482,  -135,    47,   -25,    51,   145,  -135,  -135,
-      34,  -135,   356,    52,    71,    77,  -135,    10,  -135,  -135,
-      34,  -135,  -135,  -135,    68,  -135,   193,  -135,  -135,  -135,
-      48,  -135,     6,    93,    37,    68,    18,    85,    84,  -135,
-    -135,  -135,    87,  -135,   102,    86,  -135,    89,  -135,  -135,
-    -135,  -135,  -135,    90,    88,   401,    94,   100,   101,  -135,
-    -135,    99,  -135,   108,  -135,  -135,  -135,  -135,   230,  -135,
-     -25,  -135,  -135,   105,  -135,  -135,  -135,  -135,  -135,     9,
-      42,  -135,    28,  -135,  -135,   445,  -135,  -135,   119,   125,
-    -135,  -135,   126,  -135,   128,  -135,  -135,   267,  -135,  -135,
-    -135,  -135,  -135,  -135,   129,   130,  -135,  -135
+    -134,    16,  -134,   312,  -134,  -134,    20,  -134,  -134,  -134,
+    -134,  -134,   -18,  -134,    -3,  -134,  -134,  -134,  -134,  -134,
+    -134,  -134,  -134,  -134,   -26,  -134,   -25,  -134,  -134,  -134,
+      -7,     5,    27,  -134,  -134,  -134,  -134,    46,   482,  -134,
+    -134,  -134,  -134,  -134,  -134,  -134,  -134,  -134,  -134,  -134,
+      -8,  -134,    30,    97,  -134,   482,    30,  -134,   482,     7,
+    -134,  -134,    12,    10,    42,    55,  -134,    46,   -15,    15,
+    -134,  -134,   482,  -134,    25,    26,    47,   145,  -134,  -134,
+      46,  -134,   356,    39,    71,    77,  -134,    10,  -134,  -134,
+      46,  -134,  -134,  -134,  -134,  -134,   193,  -134,  -134,  -134,
+      75,  -134,     6,    95,    43,  -134,    28,    86,    85,  -134,
+    -134,  -134,    88,  -134,   103,    87,  -134,    91,  -134,  -134,
+    -134,  -134,   -23,    90,   401,    94,   101,   102,  -134,  -134,
+      98,  -134,   108,  -134,  -134,   109,  -134,   230,  -134,    26,
+    -134,  -134,  -134,   134,  -134,  -134,  -134,  -134,  -134,     9,
+      48,  -134,    35,  -134,  -134,   445,  -134,  -134,   125,   126,
+    -134,  -134,   128,  -134,   129,  -134,  -134,   267,  -134,  -134,
+    -134,  -134,  -134,  -134,   130,   131,  -134,  -134
 };
 
 /* YYPGOTO[NTERM-NUM].  */
 static const yytype_int16 yypgoto[] =
 {
-    -135,  -135,   179,  -135,  -135,  -135,  -135,   -47,  -135,  -135,
-      91,     0,   -58,   -37,  -135,  -135,  -135,   -73,  -135,  -135,
-     -48,   -32,  -135,   -38,  -135,  -134,  -135,  -135,    29,   -63,
-    -135,  -135,  -135,  -135,   -20,  -135,  -135,   106,  -135,  -135,
-      45,    95,    82,  -135,  -135,  -135
+    -134,  -134,   180,  -134,  -134,  -134,  -134,   -33,  -134,  -134,
+      93,     0,   -58,   -37,  -134,  -134,  -134,   -73,  -134,  -134,
+     -54,   -32,  -134,   -81,  -134,  -133,  -134,  -134,    29,   -50,
+    -134,  -134,  -134,  -134,   -20,  -134,  -134,   110,  -134,  -134,
+      49,    96,    80,  -134,  -134,  -134
 };
 
 /* YYTABLE[YYPACT[STATE-NUM]].  What to do in state STATE-NUM.  If
@@ -727,26 +727,26 @@ static const yytype_int16 yypgoto[] =
 #define YYTABLE_NINF -109
 static const yytype_int16 yytable[] =
 {
-      82,    70,   104,    37,   159,    68,    57,   131,    79,    49,
-     162,     4,   100,    84,    50,    88,   101,    92,    10,    93,
-      52,    51,   102,    63,    71,    97,    56,   103,    20,   104,
-      85,   104,    73,   175,    53,    91,    81,    29,   125,   120,
-      53,    33,   -93,   132,    58,    70,   147,   101,    95,    61,
-     163,   137,   150,   102,    63,    80,   149,    63,   -93,    62,
-      63,   166,    96,    59,   133,   138,   135,   104,    47,    48,
-      60,    61,    80,    53,   132,   167,   150,   150,   101,   147,
-     125,    62,    63,   163,   102,    63,   164,   165,    70,   149,
-      63,    98,    99,    83,    89,    90,   111,   125,    74,   122,
-     103,   117,     7,     8,     9,    10,    11,    12,    13,   125,
+      82,    70,   104,    37,   159,    68,    57,   130,   142,    88,
+     162,    52,    56,    84,    49,    92,     4,    93,    10,    50,
+      51,   132,    79,   134,    71,    53,    53,   143,    20,   104,
+      85,   104,    73,   120,   175,    91,    81,    29,   124,    97,
+      58,    33,   -93,   131,    83,    70,   147,   101,    95,    61,
+     163,   150,    59,   102,    63,    80,   149,    63,   -93,    62,
+      63,   136,    96,   100,    47,    48,   104,   101,   166,    98,
+      99,    60,    80,   102,    63,   137,   150,   150,   103,   124,
+     131,    53,   167,    61,   101,   147,    89,    70,   117,   163,
+     102,    63,   111,    62,    63,   149,    63,   124,    74,   164,
+     165,    90,     7,     8,     9,    10,    11,    12,    13,   124,
       15,    16,    17,    18,    19,    20,    21,    22,    23,    24,
-     118,    26,    27,    28,    29,    30,   119,   134,    33,   139,
-     140,    98,    92,   142,   -22,   141,   154,   146,    34,   161,
-     143,   -22,  -107,   153,   -22,   -22,   112,   155,   156,   -22,
+     118,    26,    27,    28,    29,    30,   119,   103,    33,   133,
+     138,   139,    98,    92,   -22,   141,   140,   154,    34,   146,
+     142,   -22,  -107,   153,   -22,   -22,   112,   156,   155,   -22,
        7,     8,     9,    10,    11,    12,    13,   157,    15,    16,
-      17,    18,    19,    20,    21,    22,    23,    24,   170,    26,
-      27,    28,    29,    30,   171,   172,    33,   173,   176,   177,
-       5,   121,   -22,   113,   169,   160,    34,   136,     0,   -22,
-    -108,     0,   -22,   -22,   124,   130,     0,   -22,     7,     8,
+      17,    18,    19,    20,    21,    22,    23,    24,   161,    26,
+      27,    28,    29,    30,   170,   171,    33,   172,   173,   176,
+     177,     5,   -22,   121,   169,   135,    34,   113,   160,   -22,
+    -108,     0,   -22,   -22,   123,     0,   129,   -22,     7,     8,
        9,    10,    11,    12,    13,     0,    15,    16,    17,    18,
       19,    20,    21,    22,    23,    24,     0,    26,    27,    28,
       29,    30,     0,     0,    33,     0,     0,     0,     0,   -86,
@@ -784,26 +784,26 @@ static const yytype_int16 yytable[] =
 
 static const yytype_int16 yycheck[] =
 {
-      58,    38,    75,     3,   138,    37,    26,     1,    55,    32,
-       1,     0,    37,     1,    37,    63,    41,    30,     8,    32,
-      37,    23,    47,    48,    32,    72,    37,    52,    18,   102,
-      62,   104,    52,   167,    51,    67,    56,    27,    96,    87,
-      51,    31,    33,    37,    47,    82,    37,    41,    33,    37,
-      41,    33,   125,    47,    48,    55,    47,    48,    49,    47,
-      48,    33,    47,    47,   102,    47,   104,   140,    44,    45,
-      44,    37,    72,    51,    37,    47,   149,   150,    41,    37,
-     138,    47,    48,    41,    47,    48,   149,   150,   125,    47,
-      48,    44,    45,    37,    44,    46,    45,   155,     1,    31,
-      52,    49,     5,     6,     7,     8,     9,    10,    11,   167,
+      58,    38,    75,     3,   137,    37,    26,     1,    31,    63,
+       1,    37,    37,     1,    32,    30,     0,    32,     8,    37,
+      23,   102,    55,   104,    32,    51,    51,    50,    18,   102,
+      62,   104,    52,    87,   167,    67,    56,    27,    96,    72,
+      47,    31,    33,    37,    37,    82,    37,    41,    33,    37,
+      41,   124,    47,    47,    48,    55,    47,    48,    49,    47,
+      48,    33,    47,    37,    44,    45,   139,    41,    33,    44,
+      45,    44,    72,    47,    48,    47,   149,   150,    52,   137,
+      37,    51,    47,    37,    41,    37,    44,   124,    49,    41,
+      47,    48,    45,    47,    48,    47,    48,   155,     1,   149,
+     150,    46,     5,     6,     7,     8,     9,    10,    11,   167,
       13,    14,    15,    16,    17,    18,    19,    20,    21,    22,
-      49,    24,    25,    26,    27,    28,    49,    34,    31,    44,
-      46,    44,    30,    44,    37,    49,    36,    49,    41,    34,
-      50,    44,    45,    49,    47,    48,     1,    46,    49,    52,
+      49,    24,    25,    26,    27,    28,    49,    52,    31,    34,
+      44,    46,    44,    30,    37,    44,    49,    36,    41,    49,
+      31,    44,    45,    49,    47,    48,     1,    49,    46,    52,
        5,     6,     7,     8,     9,    10,    11,    49,    13,    14,
-      15,    16,    17,    18,    19,    20,    21,    22,    49,    24,
+      15,    16,    17,    18,    19,    20,    21,    22,    34,    24,
       25,    26,    27,    28,    49,    49,    31,    49,    49,    49,
-       1,    90,    37,    77,   155,   140,    41,   105,    -1,    44,
-      45,    -1,    47,    48,     1,   100,    -1,    52,     5,     6,
+      49,     1,    37,    90,   155,   105,    41,    77,   139,    44,
+      45,    -1,    47,    48,     1,    -1,   100,    52,     5,     6,
        7,     8,     9,    10,    11,    -1,    13,    14,    15,    16,
       17,    18,    19,    20,    21,    22,    -1,    24,    25,    26,
       27,    28,    -1,    -1,    31,    -1,    -1,    -1,    -1,    36,
@@ -855,9 +855,9 @@ static const yytype_uint8 yystos[] =
       46,    74,    30,    32,    97,    33,    47,    60,    44,    45,
       37,    41,    47,    52,    70,    76,    77,    91,    92,    93,
       94,    45,     1,    90,    74,    48,    49,    49,    49,    49,
-      73,    63,    31,    95,     1,    65,    78,    79,    80,    81,
-      94,     1,    37,    76,    34,    76,    95,    33,    47,    44,
-      46,    49,    44,    50,    85,    86,    49,    37,    41,    47,
+      73,    63,    95,     1,    65,    78,    79,    80,    81,    94,
+       1,    37,    76,    34,    76,    95,    33,    47,    44,    46,
+      49,    44,    31,    50,    85,    86,    49,    37,    41,    47,
       70,    82,    83,    49,    36,    46,    49,    49,     1,    78,
       93,    34,     1,    41,    82,    82,    33,    47,    36,    81,
       49,    49,    49,    49,     1,    78,    49,    49
diff --git a/scripts/genksyms/parse.y b/scripts/genksyms/parse.y
index 408cdf82b271..10d7dc724b6d 100644
--- a/scripts/genksyms/parse.y
+++ b/scripts/genksyms/parse.y
@@ -446,7 +446,7 @@ member_bitfield_declarator:
 
 attribute_opt:
         /* empty */                                     { $$ = NULL; }
-        | ATTRIBUTE_PHRASE
+        | attribute_opt ATTRIBUTE_PHRASE
         ;
 
 asm_definition:
diff --git a/scripts/kconfig/lex.zconf.c_shipped b/scripts/kconfig/lex.zconf.c_shipped
index 6a61cee4a32c..7342ce0a7780 100644
--- a/scripts/kconfig/lex.zconf.c_shipped
+++ b/scripts/kconfig/lex.zconf.c_shipped
@@ -5,10 +5,29 @@
 
 /* A lexical scanner generated by flex */
 
+#define yy_create_buffer zconf_create_buffer
+#define yy_delete_buffer zconf_delete_buffer
+#define yy_flex_debug zconf_flex_debug
+#define yy_init_buffer zconf_init_buffer
+#define yy_flush_buffer zconf_flush_buffer
+#define yy_load_buffer_state zconf_load_buffer_state
+#define yy_switch_to_buffer zconf_switch_to_buffer
+#define yyin zconfin
+#define yyleng zconfleng
+#define yylex zconflex
+#define yylineno zconflineno
+#define yyout zconfout
+#define yyrestart zconfrestart
+#define yytext zconftext
+#define yywrap zconfwrap
+#define yyalloc zconfalloc
+#define yyrealloc zconfrealloc
+#define yyfree zconffree
+
 #define FLEX_SCANNER
 #define YY_FLEX_MAJOR_VERSION 2
 #define YY_FLEX_MINOR_VERSION 5
-#define YY_FLEX_SUBMINOR_VERSION 33
+#define YY_FLEX_SUBMINOR_VERSION 35
 #if YY_FLEX_SUBMINOR_VERSION > 0
 #define FLEX_BETA
 #endif
@@ -30,7 +49,7 @@
 
 /* C99 systems have <inttypes.h>. Non-C99 systems may or may not. */
 
-#if __STDC_VERSION__ >= 199901L
+#if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L
 
 /* C99 says to define __STDC_LIMIT_MACROS before including stdint.h,
  * if you want the limit (max/min) macros for int types. 
@@ -53,7 +72,6 @@ typedef int flex_int32_t;
 typedef unsigned char flex_uint8_t; 
 typedef unsigned short int flex_uint16_t;
 typedef unsigned int flex_uint32_t;
-#endif /* ! C99 */
 
 /* Limits of integral types. */
 #ifndef INT8_MIN
@@ -84,6 +102,8 @@ typedef unsigned int flex_uint32_t;
 #define UINT32_MAX             (4294967295U)
 #endif
 
+#endif /* ! C99 */
+
 #endif /* ! FLEXINT_H */
 
 #ifdef __cplusplus
@@ -93,11 +113,12 @@ typedef unsigned int flex_uint32_t;
 
 #else   /* ! __cplusplus */
 
-#if __STDC__
+/* C99 requires __STDC__ to be defined as 1. */
+#if defined (__STDC__)
 
 #define YY_USE_CONST
 
-#endif  /* __STDC__ */
+#endif  /* defined (__STDC__) */
 #endif  /* ! __cplusplus */
 
 #ifdef YY_USE_CONST
@@ -177,14 +198,9 @@ extern FILE *zconfin, *zconfout;
 
 #define unput(c) yyunput( c, (yytext_ptr)  )
 
-/* The following is because we cannot portably get our hands on size_t
- * (without autoconf's help, which isn't available because we want
- * flex-generated scanners to compile on their own).
- */
-
 #ifndef YY_TYPEDEF_YY_SIZE_T
 #define YY_TYPEDEF_YY_SIZE_T
-typedef unsigned int yy_size_t;
+typedef size_t yy_size_t;
 #endif
 
 #ifndef YY_STRUCT_YY_BUFFER_STATE
@@ -335,7 +351,7 @@ void zconffree (void *  );
 
 /* Begin user sect3 */
 
-#define zconfwrap() 1
+#define zconfwrap(n) 1
 #define YY_SKIP_YYWRAP
 
 typedef unsigned char YY_CHAR;
@@ -748,6 +764,7 @@ int zconf_flex_debug = 0;
 #define YY_MORE_ADJ 0
 #define YY_RESTORE_YY_MORE_OFFSET
 char *zconftext;
+#define YY_NO_INPUT 1
 
 /*
  * Copyright (C) 2002 Roman Zippel <zippel@linux-m68k.org>
@@ -834,6 +851,35 @@ void alloc_string(const char *str, int size)
 
 static int yy_init_globals (void );
 
+/* Accessor methods to globals.
+   These are made visible to non-reentrant scanners for convenience. */
+
+int zconflex_destroy (void );
+
+int zconfget_debug (void );
+
+void zconfset_debug (int debug_flag  );
+
+YY_EXTRA_TYPE zconfget_extra (void );
+
+void zconfset_extra (YY_EXTRA_TYPE user_defined  );
+
+FILE *zconfget_in (void );
+
+void zconfset_in  (FILE * in_str  );
+
+FILE *zconfget_out (void );
+
+void zconfset_out  (FILE * out_str  );
+
+int zconfget_leng (void );
+
+char *zconfget_text (void );
+
+int zconfget_lineno (void );
+
+void zconfset_lineno (int line_number  );
+
 /* Macros after this point can all be overridden by user definitions in
  * section 1.
  */
@@ -876,7 +922,7 @@ static int input (void );
 /* This used to be an fputs(), but since the string might contain NUL's,
  * we now use fwrite().
  */
-#define ECHO (void) fwrite( zconftext, zconfleng, 1, zconfout )
+#define ECHO fwrite( zconftext, zconfleng, 1, zconfout )
 #endif
 
 /* Gets input and stuffs it into "buf".  number of characters read, or YY_NULL,
@@ -1540,6 +1586,14 @@ static int yy_get_next_buffer (void)
         else
                 ret_val = EOB_ACT_CONTINUE_SCAN;
 
+        if ((yy_size_t) ((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) {
+                /* Extend the array by 50%, plus the number we really need. */
+                yy_size_t new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1);
+                YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) zconfrealloc((void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf,new_size  );
+                if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf )
+                        YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" );
+        }
+
         (yy_n_chars) += number_to_move;
         YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR;
         YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR;
@@ -1926,7 +1980,9 @@ static void zconfensure_buffer_stack (void)
                 (yy_buffer_stack) = (struct yy_buffer_state**)zconfalloc
                                                                 (num_to_alloc * sizeof(struct yy_buffer_state*)
                                                                 );
-                
+                if ( ! (yy_buffer_stack) )
+                        YY_FATAL_ERROR( "out of dynamic memory in zconfensure_buffer_stack()" );
+                                                                  
                 memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*));
                                 
                 (yy_buffer_stack_max) = num_to_alloc;
@@ -1944,6 +2000,8 @@ static void zconfensure_buffer_stack (void)
                                                                 ((yy_buffer_stack),
                                                                 num_to_alloc * sizeof(struct yy_buffer_state*)
                                                                 );
+                if ( ! (yy_buffer_stack) )
+                        YY_FATAL_ERROR( "out of dynamic memory in zconfensure_buffer_stack()" );
 
                 /* zero only the new slots.*/
                 memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*));
diff --git a/scripts/kconfig/zconf.l b/scripts/kconfig/zconf.l
index 4cea5c85cd0a..5164ef7ce499 100644
--- a/scripts/kconfig/zconf.l
+++ b/scripts/kconfig/zconf.l
@@ -1,5 +1,6 @@
 %option backup nostdinit noyywrap never-interactive full ecs
 %option 8bit backup nodefault perf-report perf-report
+%option noinput
 %x COMMAND HELP STRING PARAM
 %{
 /*
diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c
index 8f038e6d5f98..418cd7dbbc93 100644
--- a/scripts/mod/modpost.c
+++ b/scripts/mod/modpost.c
@@ -1468,7 +1468,7 @@ static void section_rel(const char *modname, struct elf_info *elf,
  * marked __initdata will be discarded when the module has been intialized.
  * Likewise for modules used built-in the sections marked __exit
  * are discarded because __exit marked function are supposed to be called
- * only when a moduel is unloaded which never happes for built-in modules.
+ * only when a module is unloaded which never happens for built-in modules.
  * The check_sec_ref() function traverses all relocation records
  * to find all references to a section that reference a section that will
  * be discarded and warns about it.
diff --git a/scripts/ver_linux b/scripts/ver_linux
index 7ac0e309be09..dbb3037f1346 100755
--- a/scripts/ver_linux
+++ b/scripts/ver_linux
@@ -4,7 +4,6 @@
 # /bin /sbin /usr/bin /usr/sbin /usr/local/bin, but it may
 # differ on your system.
 #
-PATH=/sbin:/usr/sbin:/bin:/usr/bin:/usr/local/sbin:$PATH
 echo 'If some fields are empty or look unusual you may have an old version.'
 echo 'Compare to the current minimal requirements in Documentation/Changes.'
 echo ' '
diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index 40d06c533f89..3ae9bec5a508 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -998,8 +998,12 @@ static int selinux_sb_show_options(struct seq_file *m, struct super_block *sb)
         int rc;
 
         rc = selinux_get_mnt_opts(sb, &opts);
-        if (rc)
+        if (rc) {
+                /* before policy load we may get EINVAL, don't show anything */
+                if (rc == -EINVAL)
+                        rc = 0;
                 return rc;
+        }
 
         selinux_write_opts(m, &opts);
 
diff --git a/sound/i2c/other/tea575x-tuner.c b/sound/i2c/other/tea575x-tuner.c
index 87e3aefeddc3..83e90057270e 100644
--- a/sound/i2c/other/tea575x-tuner.c
+++ b/sound/i2c/other/tea575x-tuner.c
@@ -189,9 +189,7 @@ void snd_tea575x_init(struct snd_tea575x *tea)
         }
 
         memset(&tea->vd, 0, sizeof(tea->vd));
-        tea->vd.owner = tea->card->module;
         strcpy(tea->vd.name, tea->tea5759 ? "TEA5759 radio" : "TEA5757 radio");
-        tea->vd.type = VID_TYPE_TUNER;
         tea->vd.release = snd_tea575x_release;
         video_set_drvdata(&tea->vd, tea);
         tea->vd.fops = &tea->fops;
diff --git a/sound/sh/aica.c b/sound/sh/aica.c
index 9ca113326143..54df8baf916f 100644
--- a/sound/sh/aica.c
+++ b/sound/sh/aica.c
@@ -42,7 +42,7 @@
 #include <sound/info.h>
 #include <asm/io.h>
 #include <asm/dma.h>
-#include <asm/dreamcast/sysasic.h>
+#include <mach/sysasic.h>
 #include "aica.h"
 
 MODULE_AUTHOR("Adrian McMenamin <adrian@mcmen.demon.co.uk>");
diff --git a/sound/soc/fsl/fsl_dma.c b/sound/soc/fsl/fsl_dma.c
index da2bc5902864..7ceea2bba1f5 100644
--- a/sound/soc/fsl/fsl_dma.c
+++ b/sound/soc/fsl/fsl_dma.c
@@ -132,12 +132,17 @@ struct fsl_dma_private {
  * Since each link descriptor has a 32-bit byte count field, we set
  * period_bytes_max to the largest 32-bit number.  We also have no maximum
  * number of periods.
+ *
+ * Note that we specify SNDRV_PCM_INFO_JOINT_DUPLEX here, but only because a
+ * limitation in the SSI driver requires the sample rates for playback and
+ * capture to be the same.
  */
 static const struct snd_pcm_hardware fsl_dma_hardware = {
 
         .info                   = SNDRV_PCM_INFO_INTERLEAVED |
                                   SNDRV_PCM_INFO_MMAP |
-                                  SNDRV_PCM_INFO_MMAP_VALID,
+                                  SNDRV_PCM_INFO_MMAP_VALID |
+                                  SNDRV_PCM_INFO_JOINT_DUPLEX,
         .formats                = FSLDMA_PCM_FORMATS,
         .rates                  = FSLDMA_PCM_RATES,
         .rate_min               = 5512,
diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
index 71bff33f5528..157a7895ffa1 100644
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -67,6 +67,8 @@
  * @ssi: pointer to the SSI's registers
  * @ssi_phys: physical address of the SSI registers
  * @irq: IRQ of this SSI
+ * @first_stream: pointer to the stream that was opened first
+ * @second_stream: pointer to second stream
  * @dev: struct device pointer
  * @playback: the number of playback streams opened
  * @capture: the number of capture streams opened
@@ -79,6 +81,8 @@ struct fsl_ssi_private {
         struct ccsr_ssi __iomem *ssi;
         dma_addr_t ssi_phys;
         unsigned int irq;
+        struct snd_pcm_substream *first_stream;
+        struct snd_pcm_substream *second_stream;
         struct device *dev;
         unsigned int playback;
         unsigned int capture;
@@ -342,6 +346,49 @@ static int fsl_ssi_startup(struct snd_pcm_substream *substream)
                  */
         }
 
+        if (!ssi_private->first_stream)
+                ssi_private->first_stream = substream;
+        else {
+                /* This is the second stream open, so we need to impose sample
+                 * rate and maybe sample size constraints.  Note that this can
+                 * cause a race condition if the second stream is opened before
+                 * the first stream is fully initialized.
+                 *
+                 * We provide some protection by checking to make sure the first
+                 * stream is initialized, but it's not perfect.  ALSA sometimes
+                 * re-initializes the driver with a different sample rate or
+                 * size.  If the second stream is opened before the first stream
+                 * has received its final parameters, then the second stream may
+                 * be constrained to the wrong sample rate or size.
+                 *
+                 * FIXME: This code does not handle opening and closing streams
+                 * repeatedly.  If you open two streams and then close the first
+                 * one, you may not be able to open another stream until you
+                 * close the second one as well.
+                 */
+                struct snd_pcm_runtime *first_runtime =
+                        ssi_private->first_stream->runtime;
+
+                if (!first_runtime->rate || !first_runtime->sample_bits) {
+                        dev_err(substream->pcm->card->dev,
+                                "set sample rate and size in %s stream first\n",
+                                substream->stream == SNDRV_PCM_STREAM_PLAYBACK
+                                ? "capture" : "playback");
+                        return -EAGAIN;
+                }
+
+                snd_pcm_hw_constraint_minmax(substream->runtime,
+                        SNDRV_PCM_HW_PARAM_RATE,
+                        first_runtime->rate, first_runtime->rate);
+
+                snd_pcm_hw_constraint_minmax(substream->runtime,
+                        SNDRV_PCM_HW_PARAM_SAMPLE_BITS,
+                        first_runtime->sample_bits,
+                        first_runtime->sample_bits);
+
+                ssi_private->second_stream = substream;
+        }
+
         if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
                 ssi_private->playback++;
 
@@ -371,18 +418,16 @@ static int fsl_ssi_prepare(struct snd_pcm_substream *substream)
         struct fsl_ssi_private *ssi_private = rtd->dai->cpu_dai->private_data;
 
         struct ccsr_ssi __iomem *ssi = ssi_private->ssi;
-        u32 wl;
 
-        wl = CCSR_SSI_SxCCR_WL(snd_pcm_format_width(runtime->format));
+        if (substream == ssi_private->first_stream) {
+                u32 wl;
 
-        clrbits32(&ssi->scr, CCSR_SSI_SCR_SSIEN);
+                /* The SSI should always be disabled at this points (SSIEN=0) */
+                wl = CCSR_SSI_SxCCR_WL(snd_pcm_format_width(runtime->format));
 
-        if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+                /* In synchronous mode, the SSI uses STCCR for capture */
                 clrsetbits_be32(&ssi->stccr, CCSR_SSI_SxCCR_WL_MASK, wl);
-        else
-                clrsetbits_be32(&ssi->srccr, CCSR_SSI_SxCCR_WL_MASK, wl);
-
-        setbits32(&ssi->scr, CCSR_SSI_SCR_SSIEN);
+        }
 
         return 0;
 }
@@ -407,9 +452,13 @@ static int fsl_ssi_trigger(struct snd_pcm_substream *substream, int cmd)
         case SNDRV_PCM_TRIGGER_RESUME:
         case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
                 if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
-                        setbits32(&ssi->scr, CCSR_SSI_SCR_TE);
+                        clrbits32(&ssi->scr, CCSR_SSI_SCR_SSIEN);
+                        setbits32(&ssi->scr,
+                                CCSR_SSI_SCR_SSIEN | CCSR_SSI_SCR_TE);
                 } else {
-                        setbits32(&ssi->scr, CCSR_SSI_SCR_RE);
+                        clrbits32(&ssi->scr, CCSR_SSI_SCR_SSIEN);
+                        setbits32(&ssi->scr,
+                                CCSR_SSI_SCR_SSIEN | CCSR_SSI_SCR_RE);
 
                         /*
                          * I think we need this delay to allow time for the SSI
@@ -452,6 +501,11 @@ static void fsl_ssi_shutdown(struct snd_pcm_substream *substream)
         if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
                 ssi_private->capture--;
 
+        if (ssi_private->first_stream == substream)
+                ssi_private->first_stream = ssi_private->second_stream;
+
+        ssi_private->second_stream = NULL;
+
         /*
          * If this is the last active substream, disable the SSI and release
          * the IRQ.
diff --git a/sound/soc/pxa/poodle.c b/sound/soc/pxa/poodle.c
index 65a4e9a8c39e..d968cf71b569 100644
--- a/sound/soc/pxa/poodle.c
+++ b/sound/soc/pxa/poodle.c
@@ -85,17 +85,13 @@ static int poodle_startup(struct snd_pcm_substream *substream)
 }
 
 /* we need to unmute the HP at shutdown as the mute burns power on poodle */
-static int poodle_shutdown(struct snd_pcm_substream *substream)
+static void poodle_shutdown(struct snd_pcm_substream *substream)
 {
-        struct snd_soc_pcm_runtime *rtd = substream->private_data;
-        struct snd_soc_codec *codec = rtd->socdev->codec;
-
         /* set = unmute headphone */
         locomo_gpio_write(&poodle_locomo_device.dev,
                 POODLE_LOCOMO_GPIO_MUTE_L, 1);
         locomo_gpio_write(&poodle_locomo_device.dev,
                 POODLE_LOCOMO_GPIO_MUTE_R, 1);
-        return 0;
 }
 
 static int poodle_hw_params(struct snd_pcm_substream *substream,
@@ -232,7 +228,7 @@ static const struct soc_enum poodle_enum[] = {
         SOC_ENUM_SINGLE_EXT(2, spk_function),
 };
 
-static const snd_kcontrol_new_t wm8731_poodle_controls[] = {
+static const struct snd_kcontrol_new wm8731_poodle_controls[] = {
         SOC_ENUM_EXT("Jack Function", poodle_enum[0], poodle_get_jack,
                 poodle_set_jack),
         SOC_ENUM_EXT("Speaker Function", poodle_enum[1], poodle_get_spk,
diff --git a/sound/soc/pxa/tosa.c b/sound/soc/pxa/tosa.c
index fe6cca9c9e76..22971a0f040e 100644
--- a/sound/soc/pxa/tosa.c
+++ b/sound/soc/pxa/tosa.c
@@ -33,7 +33,6 @@
 #include <asm/arch/pxa-regs.h>
 #include <asm/arch/hardware.h>
 #include <asm/arch/audio.h>
-#include <asm/arch/tosa.h>
 
 #include "../codecs/wm9712.h"
 #include "pxa2xx-pcm.h"
diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c
index 820347c9ae4b..f9d100bc8479 100644
--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -470,6 +470,7 @@ int dapm_reg_event(struct snd_soc_dapm_widget *w,
 
         return 0;
 }
+EXPORT_SYMBOL_GPL(dapm_reg_event);
 
 /*
  * Scan each dapm widget for complete audio path.