4 files changed, 283 insertions, 218 deletions

diff --git a/arch/mips/sibyte/Kconfig b/arch/mips/sibyte/Kconfig
index 10cc40304347..bdf24a7b5494 100644
--- a/arch/mips/sibyte/Kconfig
+++ b/arch/mips/sibyte/Kconfig
@@ -8,12 +8,14 @@ config SIBYTE_SB1250
 config SIBYTE_BCM1120
         bool
         select SIBYTE_BCM112X
+        select SIBYTE_HAS_ZBUS_PROFILING
         select SIBYTE_SB1xxx_SOC
 
 config SIBYTE_BCM1125
         bool
         select HW_HAS_PCI
         select SIBYTE_BCM112X
+        select SIBYTE_HAS_ZBUS_PROFILING
         select SIBYTE_SB1xxx_SOC
 
 config SIBYTE_BCM1125H
@@ -21,11 +23,13 @@ config SIBYTE_BCM1125H
         select HW_HAS_PCI
         select SIBYTE_BCM112X
         select SIBYTE_ENABLE_LDT_IF_PCI
+        select SIBYTE_HAS_ZBUS_PROFILING
         select SIBYTE_SB1xxx_SOC
 
 config SIBYTE_BCM112X
         bool
         select SIBYTE_SB1xxx_SOC
+        select SIBYTE_HAS_ZBUS_PROFILING
 
 config SIBYTE_BCM1x80
         bool
@@ -37,6 +41,7 @@ config SIBYTE_BCM1x55
         bool
         select HW_HAS_PCI
         select SIBYTE_SB1xxx_SOC
+        select SIBYTE_HAS_ZBUS_PROFILING
         select SYS_SUPPORTS_SMP
 
 config SIBYTE_SB1xxx_SOC
@@ -164,5 +169,8 @@ config SIBYTE_SB1250_PROF
         depends on SIBYTE_SB1xxx_SOC
 
 config SIBYTE_TBPROF
-        bool "Support for ZBbus profiling"
-        depends on SIBYTE_SB1xxx_SOC
+        tristate "Support for ZBbus profiling"
+        depends on SIBYTE_HAS_ZBUS_PROFILING
+
+config SIBYTE_HAS_ZBUS_PROFILING
+        bool
diff --git a/arch/mips/sibyte/sb1250/bcm1250_tbprof.c b/arch/mips/sibyte/sb1250/bcm1250_tbprof.c
index 212547c57310..ea0ca131a3cf 100644
--- a/arch/mips/sibyte/sb1250/bcm1250_tbprof.c
+++ b/arch/mips/sibyte/sb1250/bcm1250_tbprof.c
@@ -1,6 +1,4 @@
 /*
- * Copyright (C) 2001, 2002, 2003 Broadcom Corporation
- *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * as published by the Free Software Foundation; either version 2
@@ -14,10 +12,16 @@
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ *
+ * Copyright (C) 2001, 2002, 2003 Broadcom Corporation
+ * Copyright (C) 2007 Ralf Baechle <ralf@linux-mips.org>
+ * Copyright (C) 2007 MIPS Technologies, Inc.
+ *    written by Ralf Baechle <ralf@linux-mips.org>
  */
 
-#define SBPROF_TB_DEBUG 0
+#undef DEBUG
 
+#include <linux/device.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
@@ -27,24 +31,98 @@
 #include <linux/vmalloc.h>
 #include <linux/fs.h>
 #include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/smp_lock.h>
+#include <linux/types.h>
 #include <linux/wait.h>
-#include <asm/uaccess.h>
+
 #include <asm/io.h>
 #include <asm/sibyte/sb1250.h>
 #include <asm/sibyte/sb1250_regs.h>
 #include <asm/sibyte/sb1250_scd.h>
 #include <asm/sibyte/sb1250_int.h>
-#include <asm/sibyte/trace_prof.h>
+#include <asm/system.h>
+#include <asm/uaccess.h>
 
-#define DEVNAME "bcm1250_tbprof"
+#define SBPROF_TB_MAJOR 240
+
+typedef u64 tb_sample_t[6*256];
+
+enum open_status {
+        SB_CLOSED,
+        SB_OPENING,
+        SB_OPEN
+};
+
+struct sbprof_tb {
+        wait_queue_head_t       tb_sync;
+        wait_queue_head_t       tb_read;
+        struct mutex            lock;
+        enum open_status        open;
+        tb_sample_t             *sbprof_tbbuf;
+        int                     next_tb_sample;
+
+        volatile int            tb_enable;
+        volatile int            tb_armed;
+
+};
 
 static struct sbprof_tb sbp;
 
+#define MAX_SAMPLE_BYTES (24*1024*1024)
+#define MAX_TBSAMPLE_BYTES (12*1024*1024)
+
+#define MAX_SAMPLES (MAX_SAMPLE_BYTES/sizeof(u_int32_t))
+#define TB_SAMPLE_SIZE (sizeof(tb_sample_t))
+#define MAX_TB_SAMPLES (MAX_TBSAMPLE_BYTES/TB_SAMPLE_SIZE)
+
+/* ioctls */
+#define SBPROF_ZBSTART          _IOW('s', 0, int)
+#define SBPROF_ZBSTOP           _IOW('s', 1, int)
+#define SBPROF_ZBWAITFULL       _IOW('s', 2, int)
+
+/*
+ * Routines for using 40-bit SCD cycle counter
+ *
+ * Client responsible for either handling interrupts or making sure
+ * the cycles counter never saturates, e.g., by doing
+ * zclk_timer_init(0) at least every 2^40 - 1 ZCLKs.
+ */
+
+/*
+ * Configures SCD counter 0 to count ZCLKs starting from val;
+ * Configures SCD counters1,2,3 to count nothing.
+ * Must not be called while gathering ZBbus profiles.
+ */
+
+#define zclk_timer_init(val) \
+  __asm__ __volatile__ (".set push;" \
+                        ".set mips64;" \
+                        "la   $8, 0xb00204c0;" /* SCD perf_cnt_cfg */ \
+                        "sd   %0, 0x10($8);"   /* write val to counter0 */ \
+                        "sd   %1, 0($8);"      /* config counter0 for zclks*/ \
+                        ".set pop" \
+                        : /* no outputs */ \
+                                                     /* enable, counter0 */ \
+                        : /* inputs */ "r"(val), "r" ((1ULL << 33) | 1ULL) \
+                        : /* modifies */ "$8" )
+
+
+/* Reads SCD counter 0 and puts result in value
+   unsigned long long val; */
+#define zclk_get(val) \
+  __asm__ __volatile__ (".set push;" \
+                        ".set mips64;" \
+                        "la   $8, 0xb00204c0;" /* SCD perf_cnt_cfg */ \
+                        "ld   %0, 0x10($8);"   /* write val to counter0 */ \
+                        ".set pop" \
+                        : /* outputs */ "=r"(val) \
+                        : /* inputs */ \
+                        : /* modifies */ "$8" )
+
+#define DEVNAME "bcm1250_tbprof"
+
 #define TB_FULL (sbp.next_tb_sample == MAX_TB_SAMPLES)
 
-/************************************************************************
+/*
  * Support for ZBbus sampling using the trace buffer
  *
  * We use the SCD performance counter interrupt, caused by a Zclk counter
@@ -54,30 +132,36 @@ static struct sbprof_tb sbp;
  * overflow.
  *
  * We map the interrupt for trace_buffer_freeze to handle it on CPU 0.
- *
- ************************************************************************/
+ */
 
-static u_int64_t tb_period;
+static u64 tb_period;
 
 static void arm_tb(void)
 {
-        u_int64_t scdperfcnt;
-        u_int64_t next = (1ULL << 40) - tb_period;
-        u_int64_t tb_options = M_SCD_TRACE_CFG_FREEZE_FULL;
-        /* Generate an SCD_PERFCNT interrupt in TB_PERIOD Zclks to
-           trigger start of trace.  XXX vary sampling period */
+        u64 scdperfcnt;
+        u64 next = (1ULL << 40) - tb_period;
+        u64 tb_options = M_SCD_TRACE_CFG_FREEZE_FULL;
+
+        /*
+         * Generate an SCD_PERFCNT interrupt in TB_PERIOD Zclks to trigger
+         *start of trace.  XXX vary sampling period
+         */
         __raw_writeq(0, IOADDR(A_SCD_PERF_CNT_1));
         scdperfcnt = __raw_readq(IOADDR(A_SCD_PERF_CNT_CFG));
-        /* Unfortunately, in Pass 2 we must clear all counters to knock down
-           a previous interrupt request.  This means that bus profiling
-           requires ALL of the SCD perf counters. */
+
+        /*
+         * Unfortunately, in Pass 2 we must clear all counters to knock down a
+         * previous interrupt request.  This means that bus profiling requires
+         * ALL of the SCD perf counters.
+         */
         __raw_writeq((scdperfcnt & ~M_SPC_CFG_SRC1) |
-                                                // keep counters 0,2,3 as is
-                     M_SPC_CFG_ENABLE |         // enable counting
-                     M_SPC_CFG_CLEAR |          // clear all counters
-                     V_SPC_CFG_SRC1(1),         // counter 1 counts cycles
+                                                /* keep counters 0,2,3 as is */
+                     M_SPC_CFG_ENABLE |         /* enable counting */
+                     M_SPC_CFG_CLEAR |          /* clear all counters */
+                     V_SPC_CFG_SRC1(1),         /* counter 1 counts cycles */
                      IOADDR(A_SCD_PERF_CNT_CFG));
         __raw_writeq(next, IOADDR(A_SCD_PERF_CNT_1));
+
         /* Reset the trace buffer */
         __raw_writeq(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG));
 #if 0 && defined(M_SCD_TRACE_CFG_FORCECNT)
@@ -91,43 +175,45 @@ static void arm_tb(void)
 static irqreturn_t sbprof_tb_intr(int irq, void *dev_id)
 {
         int i;
-        DBG(printk(DEVNAME ": tb_intr\n"));
+
+        pr_debug(DEVNAME ": tb_intr\n");
+
         if (sbp.next_tb_sample < MAX_TB_SAMPLES) {
                 /* XXX should use XKPHYS to make writes bypass L2 */
-                u_int64_t *p = sbp.sbprof_tbbuf[sbp.next_tb_sample++];
+                u64 *p = sbp.sbprof_tbbuf[sbp.next_tb_sample++];
                 /* Read out trace */
                 __raw_writeq(M_SCD_TRACE_CFG_START_READ,
                              IOADDR(A_SCD_TRACE_CFG));
                 __asm__ __volatile__ ("sync" : : : "memory");
                 /* Loop runs backwards because bundles are read out in reverse order */
                 for (i = 256 * 6; i > 0; i -= 6) {
-                        // Subscripts decrease to put bundle in the order
-                        //   t0 lo, t0 hi, t1 lo, t1 hi, t2 lo, t2 hi
+                        /* Subscripts decrease to put bundle in the order */
+                        /*   t0 lo, t0 hi, t1 lo, t1 hi, t2 lo, t2 hi */
                         p[i - 1] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
-                                                                // read t2 hi
+                                                                /* read t2 hi */
                         p[i - 2] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
-                                                                // read t2 lo
+                                                                /* read t2 lo */
                         p[i - 3] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
-                                                                // read t1 hi
+                                                                /* read t1 hi */
                         p[i - 4] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
-                                                                // read t1 lo
+                                                                /* read t1 lo */
                         p[i - 5] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
-                                                                // read t0 hi
+                                                                /* read t0 hi */
                         p[i - 6] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
-                                                                // read t0 lo
+                                                                /* read t0 lo */
                 }
                 if (!sbp.tb_enable) {
-                        DBG(printk(DEVNAME ": tb_intr shutdown\n"));
+                        pr_debug(DEVNAME ": tb_intr shutdown\n");
                         __raw_writeq(M_SCD_TRACE_CFG_RESET,
                                      IOADDR(A_SCD_TRACE_CFG));
                         sbp.tb_armed = 0;
                         wake_up(&sbp.tb_sync);
                 } else {
-                        arm_tb();       // knock down current interrupt and get another one later
+                        arm_tb();       /* knock down current interrupt and get another one later */
                 }
         } else {
                 /* No more trace buffer samples */
-                DBG(printk(DEVNAME ": tb_intr full\n"));
+                pr_debug(DEVNAME ": tb_intr full\n");
                 __raw_writeq(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG));
                 sbp.tb_armed = 0;
                 if (!sbp.tb_enable) {
@@ -135,6 +221,7 @@ static irqreturn_t sbprof_tb_intr(int irq, void *dev_id)
                 }
                 wake_up(&sbp.tb_read);
         }
+
         return IRQ_HANDLED;
 }
 
@@ -144,23 +231,30 @@ static irqreturn_t sbprof_pc_intr(int irq, void *dev_id)
         return IRQ_NONE;
 }
 
-int sbprof_zbprof_start(struct file *filp)
+/*
+ * Requires: Already called zclk_timer_init with a value that won't
+ *           saturate 40 bits.  No subsequent use of SCD performance counters
+ *           or trace buffer.
+ */
+
+static int sbprof_zbprof_start(struct file *filp)
 {
-        u_int64_t scdperfcnt;
+        u64 scdperfcnt;
+        int err;
 
-        if (sbp.tb_enable)
+        if (xchg(&sbp.tb_enable, 1))
                 return -EBUSY;
 
-        DBG(printk(DEVNAME ": starting\n"));
+        pr_debug(DEVNAME ": starting\n");
 
-        sbp.tb_enable = 1;
         sbp.next_tb_sample = 0;
         filp->f_pos = 0;
 
-        if (request_irq
-            (K_INT_TRACE_FREEZE, sbprof_tb_intr, 0, DEVNAME " trace freeze", &sbp)) {
+        err = request_irq(K_INT_TRACE_FREEZE, sbprof_tb_intr, 0,
+                        DEVNAME " trace freeze", &sbp);
+        if (err)
                 return -EBUSY;
-        }
+
         /* Make sure there isn't a perf-cnt interrupt waiting */
         scdperfcnt = __raw_readq(IOADDR(A_SCD_PERF_CNT_CFG));
         /* Disable and clear counters, override SRC_1 */
@@ -168,18 +262,21 @@ int sbprof_zbprof_start(struct file *filp)
                      M_SPC_CFG_ENABLE | M_SPC_CFG_CLEAR | V_SPC_CFG_SRC1(1),
                      IOADDR(A_SCD_PERF_CNT_CFG));
 
-        /* We grab this interrupt to prevent others from trying to use
-           it, even though we don't want to service the interrupts
-           (they only feed into the trace-on-interrupt mechanism) */
-        if (request_irq
-            (K_INT_PERF_CNT, sbprof_pc_intr, 0, DEVNAME " scd perfcnt", &sbp)) {
-                free_irq(K_INT_TRACE_FREEZE, &sbp);
-                return -EBUSY;
-        }
-
-        /* I need the core to mask these, but the interrupt mapper to
-           pass them through.  I am exploiting my knowledge that
-           cp0_status masks out IP[5]. krw */
+        /*
+         * We grab this interrupt to prevent others from trying to use it, even
+         * though we don't want to service the interrupts (they only feed into
+         * the trace-on-interrupt mechanism)
+         */
+        err = request_irq(K_INT_PERF_CNT, sbprof_pc_intr, 0,
+                        DEVNAME " scd perfcnt", &sbp);
+        if (err)
+                goto out_free_irq;
+
+        /*
+         * I need the core to mask these, but the interrupt mapper to pass them
+         * through.  I am exploiting my knowledge that cp0_status masks out
+         * IP[5]. krw
+         */
         __raw_writeq(K_INT_MAP_I3,
                      IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MAP_BASE) +
                             (K_INT_PERF_CNT << 3)));
@@ -201,7 +298,7 @@ int sbprof_zbprof_start(struct file *filp)
         __raw_writeq(0, IOADDR(A_ADDR_TRAP_CFG_3));
 
         /* Initialize Trace Event 0-7 */
-        //                              when interrupt
+        /*                              when interrupt */
         __raw_writeq(M_SCD_TREVT_INTERRUPT, IOADDR(A_SCD_TRACE_EVENT_0));
         __raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_1));
         __raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_2));
@@ -212,10 +309,10 @@ int sbprof_zbprof_start(struct file *filp)
         __raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_7));
 
         /* Initialize Trace Sequence 0-7 */
-        //                                   Start on event 0 (interrupt)
+        /*                                   Start on event 0 (interrupt) */
         __raw_writeq(V_SCD_TRSEQ_FUNC_START | 0x0fff,
                      IOADDR(A_SCD_TRACE_SEQUENCE_0));
-        //                        dsamp when d used | asamp when a used
+        /*                        dsamp when d used | asamp when a used */
         __raw_writeq(M_SCD_TRSEQ_ASAMPLE | M_SCD_TRSEQ_DSAMPLE |
                      K_SCD_TRSEQ_TRIGGER_ALL,
                      IOADDR(A_SCD_TRACE_SEQUENCE_1));
@@ -232,33 +329,41 @@ int sbprof_zbprof_start(struct file *filp)
 
         arm_tb();
 
-        DBG(printk(DEVNAME ": done starting\n"));
+        pr_debug(DEVNAME ": done starting\n");
 
         return 0;
+
+out_free_irq:
+        free_irq(K_INT_TRACE_FREEZE, &sbp);
+
+        return err;
 }
 
-int sbprof_zbprof_stop(void)
+static int sbprof_zbprof_stop(void)
 {
-        DEFINE_WAIT(wait);
-        DBG(printk(DEVNAME ": stopping\n"));
+        int err;
+
+        pr_debug(DEVNAME ": stopping\n");
 
         if (sbp.tb_enable) {
+                /*
+                 * XXXKW there is a window here where the intr handler may run,
+                 * see the disable, and do the wake_up before this sleep
+                 * happens.
+                 */
+                pr_debug(DEVNAME ": wait for disarm\n");
+                err = wait_event_interruptible(sbp.tb_sync, !sbp.tb_armed);
+                pr_debug(DEVNAME ": disarm complete, stat %d\n", err);
+
+                if (err)
+                        return err;
+
                 sbp.tb_enable = 0;
-                /* XXXKW there is a window here where the intr handler
-                   may run, see the disable, and do the wake_up before
-                   this sleep happens. */
-                if (sbp.tb_armed) {
-                        DBG(printk(DEVNAME ": wait for disarm\n"));
-                        prepare_to_wait(&sbp.tb_sync, &wait, TASK_INTERRUPTIBLE);
-                        schedule();
-                        finish_wait(&sbp.tb_sync, &wait);
-                        DBG(printk(DEVNAME ": disarm complete\n"));
-                }
                 free_irq(K_INT_TRACE_FREEZE, &sbp);
                 free_irq(K_INT_PERF_CNT, &sbp);
         }
 
-        DBG(printk(DEVNAME ": done stopping\n"));
+        pr_debug(DEVNAME ": done stopping\n");
 
         return 0;
 }
@@ -268,42 +373,45 @@ static int sbprof_tb_open(struct inode *inode, struct file *filp)
         int minor;
 
         minor = iminor(inode);
-        if (minor != 0) {
+        if (minor != 0)
                 return -ENODEV;
-        }
-        if (sbp.open) {
+
+        if (xchg(&sbp.open, SB_OPENING) != SB_CLOSED)
                 return -EBUSY;
-        }
 
         memset(&sbp, 0, sizeof(struct sbprof_tb));
+
         sbp.sbprof_tbbuf = vmalloc(MAX_TBSAMPLE_BYTES);
-        if (!sbp.sbprof_tbbuf) {
+        if (!sbp.sbprof_tbbuf)
                 return -ENOMEM;
-        }
+
         memset(sbp.sbprof_tbbuf, 0, MAX_TBSAMPLE_BYTES);
         init_waitqueue_head(&sbp.tb_sync);
         init_waitqueue_head(&sbp.tb_read);
-        sbp.open = 1;
+        mutex_init(&sbp.lock);
+
+        sbp.open = SB_OPEN;
 
         return 0;
 }
 
 static int sbprof_tb_release(struct inode *inode, struct file *filp)
 {
-        int minor;
+        int minor = iminor(inode);
 
-        minor = iminor(inode);
-        if (minor != 0 || !sbp.open) {
+        if (minor != 0 || !sbp.open)
                 return -ENODEV;
-        }
 
-        if (sbp.tb_armed || sbp.tb_enable) {
+        mutex_lock(&sbp.lock);
+
+        if (sbp.tb_armed || sbp.tb_enable)
                 sbprof_zbprof_stop();
-        }
 
         vfree(sbp.sbprof_tbbuf);
         sbp.open = 0;
 
+        mutex_unlock(&sbp.lock);
+
         return 0;
 }
 
@@ -311,21 +419,35 @@ static ssize_t sbprof_tb_read(struct file *filp, char *buf,
                               size_t size, loff_t *offp)
 {
         int cur_sample, sample_off, cur_count, sample_left;
-        char *src;
-        int   count   =  0;
-        char *dest    =  buf;
         long  cur_off = *offp;
+        char *dest    =  buf;
+        int   count   =  0;
+        char *src;
+
+        if (!access_ok(VERIFY_WRITE, buf, size))
+                return -EFAULT;
+
+        mutex_lock(&sbp.lock);
 
         count = 0;
         cur_sample = cur_off / TB_SAMPLE_SIZE;
         sample_off = cur_off % TB_SAMPLE_SIZE;
         sample_left = TB_SAMPLE_SIZE - sample_off;
+
         while (size && (cur_sample < sbp.next_tb_sample)) {
+                int err;
+
                 cur_count = size < sample_left ? size : sample_left;
                 src = (char *)(((long)sbp.sbprof_tbbuf[cur_sample])+sample_off);
-                copy_to_user(dest, src, cur_count);
-                DBG(printk(DEVNAME ": read from sample %d, %d bytes\n",
-                           cur_sample, cur_count));
+                err = __copy_to_user(dest, src, cur_count);
+                if (err) {
+                        *offp = cur_off + cur_count - err;
+                        mutex_unlock(&sbp.lock);
+                        return err;
+                }
+
+                pr_debug(DEVNAME ": read from sample %d, %d bytes\n",
+                         cur_sample, cur_count);
                 size -= cur_count;
                 sample_left -= cur_count;
                 if (!sample_left) {
@@ -339,37 +461,43 @@ static ssize_t sbprof_tb_read(struct file *filp, char *buf,
                 dest += cur_count;
                 count += cur_count;
         }
+
         *offp = cur_off;
+        mutex_unlock(&sbp.lock);
 
         return count;
 }
 
-static long sbprof_tb_ioctl(struct file *filp,
-                            unsigned int command,
-                            unsigned long arg)
+static long sbprof_tb_ioctl(struct file *filp, unsigned int command,
+        unsigned long arg)
 {
         int error = 0;
 
-        lock_kernel();
         switch (command) {
         case SBPROF_ZBSTART:
+                mutex_lock(&sbp.lock);
                 error = sbprof_zbprof_start(filp);
+                mutex_unlock(&sbp.lock);
                 break;
+
         case SBPROF_ZBSTOP:
+                mutex_lock(&sbp.lock);
                 error = sbprof_zbprof_stop();
+                mutex_unlock(&sbp.lock);
                 break;
+
         case SBPROF_ZBWAITFULL:
-                DEFINE_WAIT(wait);
-                prepare_to_wait(&sbp.tb_read, &wait, TASK_INTERRUPTIBLE);
-                schedule();
-                finish_wait(&sbp.tb_read, &wait);
-                /* XXXKW check if interrupted? */
-                return put_user(TB_FULL, (int *) arg);
+                error = wait_event_interruptible(sbp.tb_read, TB_FULL);
+                if (error)
+                        break;
+
+                error = put_user(TB_FULL, (int *) arg);
+                break;
+
         default:
                 error = -EINVAL;
                 break;
         }
-        unlock_kernel();
 
         return error;
 }
@@ -384,23 +512,60 @@ static const struct file_operations sbprof_tb_fops = {
         .mmap           = NULL,
 };
 
+static struct class *tb_class;
+static struct device *tb_dev;
+
 static int __init sbprof_tb_init(void)
 {
+        struct device *dev;
+        struct class *tbc;
+        int err;
+
         if (register_chrdev(SBPROF_TB_MAJOR, DEVNAME, &sbprof_tb_fops)) {
                 printk(KERN_WARNING DEVNAME ": initialization failed (dev %d)\n",
                        SBPROF_TB_MAJOR);
                 return -EIO;
         }
+
+        tbc = class_create(THIS_MODULE, "sb_tracebuffer");
+        if (IS_ERR(tbc)) {
+                err = PTR_ERR(tbc);
+                goto out_chrdev;
+        }
+
+        tb_class = tbc;
+
+        dev = device_create(tbc, NULL, MKDEV(SBPROF_TB_MAJOR, 0), "tb");
+        if (IS_ERR(dev)) {
+                err = PTR_ERR(dev);
+                goto out_class;
+        }
+        tb_dev = dev;
+
         sbp.open = 0;
         tb_period = zbbus_mhz * 10000LL;
-        printk(KERN_INFO DEVNAME ": initialized - tb_period = %lld\n", tb_period);
+        pr_info(DEVNAME ": initialized - tb_period = %lld\n", tb_period);
+
         return 0;
+
+out_class:
+        class_destroy(tb_class);
+out_chrdev:
+        unregister_chrdev(SBPROF_TB_MAJOR, DEVNAME);
+
+        return err;
 }
 
 static void __exit sbprof_tb_cleanup(void)
 {
+        device_destroy(tb_class, MKDEV(SBPROF_TB_MAJOR, 0));
         unregister_chrdev(SBPROF_TB_MAJOR, DEVNAME);
+        class_destroy(tb_class);
 }
 
 module_init(sbprof_tb_init);
 module_exit(sbprof_tb_cleanup);
+
+MODULE_ALIAS_CHARDEV_MAJOR(SBPROF_TB_MAJOR);
+MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>");
+MODULE_LICENSE("GPL");
diff --git a/arch/mips/sibyte/sb1250/setup.c b/arch/mips/sibyte/sb1250/setup.c
index 1cb042eab720..87188f0f6fbe 100644
--- a/arch/mips/sibyte/sb1250/setup.c
+++ b/arch/mips/sibyte/sb1250/setup.c
@@ -16,6 +16,7 @@
  * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
  */
 #include <linux/init.h>
+#include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/reboot.h>
 #include <linux/string.h>
@@ -32,6 +33,7 @@ unsigned int soc_pass;
 unsigned int soc_type;
 unsigned int periph_rev;
 unsigned int zbbus_mhz;
+EXPORT_SYMBOL(zbbus_mhz);
 
 static char *soc_str;
 static char *pass_str;
diff --git a/include/asm-mips/sibyte/trace_prof.h b/include/asm-mips/sibyte/trace_prof.h
deleted file mode 100644
index 557792075e9a..000000000000
--- a/include/asm-mips/sibyte/trace_prof.h
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * Copyright (C) 2001 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- */
-
-#ifndef __ASM_SIBYTE_TRACE_PROF_H
-#define __ASM_SIBYTE_TRACE_PROF_H
-
-#undef DBG
-#if SBPROF_TB_DEBUG
-#define DBG(a) a
-#else
-#define DBG(a)
-#endif
-
-#define SBPROF_TB_MAJOR 240
-#define DEVNAME "bcm1250_tbprof"
-
-typedef u_int64_t tb_sample_t[6*256];
-
-struct sbprof_tb {
-        int          open;
-        tb_sample_t *sbprof_tbbuf;
-        int          next_tb_sample;
-
-        volatile int tb_enable;
-        volatile int tb_armed;
-
-        wait_queue_head_t tb_sync;
-        wait_queue_head_t tb_read;
-};
-
-#define MAX_SAMPLE_BYTES (24*1024*1024)
-#define MAX_TBSAMPLE_BYTES (12*1024*1024)
-
-#define MAX_SAMPLES (MAX_SAMPLE_BYTES/sizeof(u_int32_t))
-#define TB_SAMPLE_SIZE (sizeof(tb_sample_t))
-#define MAX_TB_SAMPLES (MAX_TBSAMPLE_BYTES/TB_SAMPLE_SIZE)
-
-/* IOCTLs */
-#define SBPROF_ZBSTART          _IOW('s', 0, int)
-#define SBPROF_ZBSTOP           _IOW('s', 1, int)
-#define SBPROF_ZBWAITFULL       _IOW('s', 2, int)
-
-/***************************************************************************
- * Routines for gathering ZBbus profiles using trace buffer
- ***************************************************************************/
-
-/* Requires: Already called zclk_timer_init with a value that won't
-             saturate 40 bits.  No subsequent use of SCD performance counters
-             or trace buffer.
-   Effect:   Starts gathering random ZBbus profiles using trace buffer. */
-extern int sbprof_zbprof_start(struct file *filp);
-
-/* Effect: Stops collection of ZBbus profiles */
-extern int sbprof_zbprof_stop(void);
-
-
-/***************************************************************************
- * Routines for using 40-bit SCD cycle counter
- *
- * Client responsible for either handling interrupts or making sure
- * the cycles counter never saturates, e.g., by doing
- * zclk_timer_init(0) at least every 2^40 - 1 ZCLKs.
- ***************************************************************************/
-
-/* Configures SCD counter 0 to count ZCLKs starting from val;
-   Configures SCD counters1,2,3 to count nothing.
-   Must not be called while gathering ZBbus profiles.
-
-unsigned long long val; */
-#define zclk_timer_init(val) \
-  __asm__ __volatile__ (".set push;" \
-                        ".set mips64;" \
-                        "la   $8, 0xb00204c0;" /* SCD perf_cnt_cfg */ \
-                        "sd   %0, 0x10($8);"   /* write val to counter0 */ \
-                        "sd   %1, 0($8);"      /* config counter0 for zclks*/ \
-                        ".set pop" \
-                        : /* no outputs */ \
-                                                     /* enable, counter0 */ \
-                        : /* inputs */ "r"(val), "r" ((1ULL << 33) | 1ULL) \
-                        : /* modifies */ "$8" )
-
-
-/* Reads SCD counter 0 and puts result in value
-   unsigned long long val; */
-#define zclk_get(val) \
-  __asm__ __volatile__ (".set push;" \
-                        ".set mips64;" \
-                        "la   $8, 0xb00204c0;" /* SCD perf_cnt_cfg */ \
-                        "ld   %0, 0x10($8);"   /* write val to counter0 */ \
-                        ".set pop" \
-                        : /* outputs */ "=r"(val) \
-                        : /* inputs */ \
-                        : /* modifies */ "$8" )
-
-#endif /* __ASM_SIBYTE_TRACE_PROF_H */