25 files changed, 64 insertions, 257 deletions

diff --git a/Documentation/hwmon/ltc4215 b/Documentation/hwmon/ltc4215
index 2e6a21eb656c..c196a1846259 100644
--- a/Documentation/hwmon/ltc4215
+++ b/Documentation/hwmon/ltc4215
@@ -22,12 +22,13 @@ Usage Notes
 -----------
 
 This driver does not probe for LTC4215 devices, due to the fact that some
-of the possible addresses are unfriendly to probing. You will need to use
-the "force" parameter to tell the driver where to find the device.
+of the possible addresses are unfriendly to probing. You will have to
+instantiate the devices explicitly.
 
 Example: the following will load the driver for an LTC4215 at address 0x44
 on I2C bus #0:
-$ modprobe ltc4215 force=0,0x44
+$ modprobe ltc4215
+$ echo ltc4215 0x44 > /sys/bus/i2c/devices/i2c-0/new_device
 
 
 Sysfs entries
diff --git a/Documentation/hwmon/ltc4245 b/Documentation/hwmon/ltc4245
index bae7a3adc5d8..02838a47d862 100644
--- a/Documentation/hwmon/ltc4245
+++ b/Documentation/hwmon/ltc4245
@@ -23,12 +23,13 @@ Usage Notes
 -----------
 
 This driver does not probe for LTC4245 devices, due to the fact that some
-of the possible addresses are unfriendly to probing. You will need to use
-the "force" parameter to tell the driver where to find the device.
+of the possible addresses are unfriendly to probing. You will have to
+instantiate the devices explicitly.
 
 Example: the following will load the driver for an LTC4245 at address 0x23
 on I2C bus #1:
-$ modprobe ltc4245 force=1,0x23
+$ modprobe ltc4245
+$ echo ltc4245 0x23 > /sys/bus/i2c/devices/i2c-1/new_device
 
 
 Sysfs entries
diff --git a/Documentation/i2c/instantiating-devices b/Documentation/i2c/instantiating-devices
index c740b7b41088..e89490270aba 100644
--- a/Documentation/i2c/instantiating-devices
+++ b/Documentation/i2c/instantiating-devices
@@ -188,7 +188,7 @@ segment, the address is sufficient to uniquely identify the device to be
 deleted.
 
 Example:
-# echo eeprom 0x50 > /sys/class/i2c-adapter/i2c-3/new_device
+# echo eeprom 0x50 > /sys/bus/i2c/devices/i2c-3/new_device
 
 While this interface should only be used when in-kernel device declaration
 can't be done, there is a variety of cases where it can be helpful:
diff --git a/Documentation/i2c/chips/eeprom b/Documentation/misc-devices/eeprom
index f7e8104b5764..f7e8104b5764 100644
--- a/Documentation/i2c/chips/eeprom
+++ b/Documentation/misc-devices/eeprom
diff --git a/Documentation/i2c/chips/max6875 b/Documentation/misc-devices/max6875
index 10ca43cd1a72..1e89ee3ccc1b 100644
--- a/Documentation/i2c/chips/max6875
+++ b/Documentation/misc-devices/max6875
@@ -42,10 +42,12 @@ General Remarks
 
 Valid addresses for the MAX6875 are 0x50 and 0x52.
 Valid addresses for the MAX6874 are 0x50, 0x52, 0x54 and 0x56.
-The driver does not probe any address, so you must force the address.
+The driver does not probe any address, so you explicitly instantiate the
+devices.
 
 Example:
-$ modprobe max6875 force=0,0x50
+$ modprobe max6875
+$ echo max6875 0x50 > /sys/bus/i2c/devices/i2c-0/new_device
 
 The MAX6874/MAX6875 ignores address bit 0, so this driver attaches to multiple
 addresses.  For example, for address 0x50, it also reserves 0x51.
diff --git a/Documentation/w1/masters/ds2482 b/Documentation/w1/masters/ds2482
index 9210d6fa5024..299b91c7609f 100644
--- a/Documentation/w1/masters/ds2482
+++ b/Documentation/w1/masters/ds2482
@@ -24,8 +24,8 @@ General Remarks
 
 Valid addresses are 0x18, 0x19, 0x1a, and 0x1b.
 However, the device cannot be detected without writing to the i2c bus, so no
-detection is done.
-You should force the device address.
+detection is done. You should instantiate the device explicitly.
 
-$ modprobe ds2482 force=0,0x18
+$ modprobe ds2482
+$ echo ds2482 0x18 > /sys/bus/i2c/devices/i2c-0/new_device
 
diff --git a/drivers/hwmon/ltc4215.c b/drivers/hwmon/ltc4215.c
index 6c9a04136e0a..00d975eb5b83 100644
--- a/drivers/hwmon/ltc4215.c
+++ b/drivers/hwmon/ltc4215.c
@@ -20,11 +20,6 @@
 #include <linux/hwmon.h>
 #include <linux/hwmon-sysfs.h>
 
-static const unsigned short normal_i2c[] = { I2C_CLIENT_END };
-
-/* Insmod parameters */
-I2C_CLIENT_INSMOD_1(ltc4215);
-
 /* Here are names of the chip's registers (a.k.a. commands) */
 enum ltc4215_cmd {
         LTC4215_CONTROL                 = 0x00, /* rw */
@@ -246,9 +241,13 @@ static const struct attribute_group ltc4215_group = {
 static int ltc4215_probe(struct i2c_client *client,
                          const struct i2c_device_id *id)
 {
+        struct i2c_adapter *adapter = client->adapter;
         struct ltc4215_data *data;
         int ret;
 
+        if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+                return -ENODEV;
+
         data = kzalloc(sizeof(*data), GFP_KERNEL);
         if (!data) {
                 ret = -ENOMEM;
@@ -294,56 +293,20 @@ static int ltc4215_remove(struct i2c_client *client)
         return 0;
 }
 
-static int ltc4215_detect(struct i2c_client *client,
-                          int kind,
-                          struct i2c_board_info *info)
-{
-        struct i2c_adapter *adapter = client->adapter;
-
-        if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-                return -ENODEV;
-
-        if (kind < 0) {         /* probed detection - check the chip type */
-                s32 v;          /* 8 bits from the chip, or -ERRNO */
-
-                /*
-                 * Register 0x01 bit b7 is reserved, expect 0
-                 * Register 0x03 bit b6 and b7 are reserved, expect 0
-                 */
-                v = i2c_smbus_read_byte_data(client, LTC4215_ALERT);
-                if (v < 0 || (v & (1 << 7)) != 0)
-                        return -ENODEV;
-
-                v = i2c_smbus_read_byte_data(client, LTC4215_FAULT);
-                if (v < 0 || (v & ((1 << 6) | (1 << 7))) != 0)
-                                return -ENODEV;
-        }
-
-        strlcpy(info->type, "ltc4215", I2C_NAME_SIZE);
-        dev_info(&adapter->dev, "ltc4215 %s at address 0x%02x\n",
-                        kind < 0 ? "probed" : "forced",
-                        client->addr);
-
-        return 0;
-}
-
 static const struct i2c_device_id ltc4215_id[] = {
-        { "ltc4215", ltc4215 },
+        { "ltc4215", 0 },
         { }
 };
 MODULE_DEVICE_TABLE(i2c, ltc4215_id);
 
 /* This is the driver that will be inserted */
 static struct i2c_driver ltc4215_driver = {
-        .class          = I2C_CLASS_HWMON,
         .driver = {
                 .name   = "ltc4215",
         },
         .probe          = ltc4215_probe,
         .remove         = ltc4215_remove,
         .id_table       = ltc4215_id,
-        .detect         = ltc4215_detect,
-        .address_data   = &addr_data,
 };
 
 static int __init ltc4215_init(void)
diff --git a/drivers/hwmon/ltc4245.c b/drivers/hwmon/ltc4245.c
index e38964333612..65c232a9d0c5 100644
--- a/drivers/hwmon/ltc4245.c
+++ b/drivers/hwmon/ltc4245.c
@@ -22,15 +22,6 @@
 #include <linux/hwmon.h>
 #include <linux/hwmon-sysfs.h>
 
-/* Valid addresses are 0x20 - 0x3f
- *
- * For now, we do not probe, since some of these addresses
- * are known to be unfriendly to probing */
-static const unsigned short normal_i2c[] = { I2C_CLIENT_END };
-
-/* Insmod parameters */
-I2C_CLIENT_INSMOD_1(ltc4245);
-
 /* Here are names of the chip's registers (a.k.a. commands) */
 enum ltc4245_cmd {
         LTC4245_STATUS                  = 0x00, /* readonly */
@@ -369,9 +360,13 @@ static const struct attribute_group ltc4245_group = {
 static int ltc4245_probe(struct i2c_client *client,
                          const struct i2c_device_id *id)
 {
+        struct i2c_adapter *adapter = client->adapter;
         struct ltc4245_data *data;
         int ret;
 
+        if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+                return -ENODEV;
+
         data = kzalloc(sizeof(*data), GFP_KERNEL);
         if (!data) {
                 ret = -ENOMEM;
@@ -418,136 +413,20 @@ static int ltc4245_remove(struct i2c_client *client)
         return 0;
 }
 
-/* Check that some bits in a control register appear at all possible
- * locations without changing value
- *
- * @client: the i2c client to use
- * @reg: the register to read
- * @bits: the bits to check (0xff checks all bits,
- *                           0x03 checks only the last two bits)
- *
- * return -ERRNO if the register read failed
- * return -ENODEV if the register value doesn't stay constant at all
- * possible addresses
- *
- * return 0 for success
- */
-static int ltc4245_check_control_reg(struct i2c_client *client, u8 reg, u8 bits)
-{
-        int i;
-        s32 v, voff1, voff2;
-
-        /* Read register and check for error */
-        v = i2c_smbus_read_byte_data(client, reg);
-        if (v < 0)
-                return v;
-
-        v &= bits;
-
-        for (i = 0x00; i < 0xff; i += 0x20) {
-
-                voff1 = i2c_smbus_read_byte_data(client, reg + i);
-                if (voff1 < 0)
-                        return voff1;
-
-                voff2 = i2c_smbus_read_byte_data(client, reg + i + 0x08);
-                if (voff2 < 0)
-                        return voff2;
-
-                voff1 &= bits;
-                voff2 &= bits;
-
-                if (v != voff1 || v != voff2)
-                        return -ENODEV;
-        }
-
-        return 0;
-}
-
-static int ltc4245_detect(struct i2c_client *client,
-                          int kind,
-                          struct i2c_board_info *info)
-{
-        struct i2c_adapter *adapter = client->adapter;
-
-        if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-                return -ENODEV;
-
-        if (kind < 0) {         /* probed detection - check the chip type */
-                s32 v;          /* 8 bits from the chip, or -ERRNO */
-
-                /* Chip registers 0x00-0x07 are control registers
-                 * Chip registers 0x10-0x1f are data registers
-                 *
-                 * Address bits b7-b5 are ignored. This makes the chip "repeat"
-                 * in steps of 0x20. Any control registers should appear with
-                 * the same values across all duplicated addresses.
-                 *
-                 * Register 0x02 bit b2 is reserved, expect 0
-                 * Register 0x07 bits b7 to b4 are reserved, expect 0
-                 *
-                 * Registers 0x01, 0x02 are control registers and should not
-                 * change on their own.
-                 *
-                 * Register 0x06 bits b6 and b7 are control bits, and should
-                 * not change on their own.
-                 *
-                 * Register 0x07 bits b3 to b0 are control bits, and should
-                 * not change on their own.
-                 */
-
-                /* read register 0x02 reserved bit, expect 0 */
-                v = i2c_smbus_read_byte_data(client, LTC4245_CONTROL);
-                if (v < 0 || (v & 0x04) != 0)
-                        return -ENODEV;
-
-                /* read register 0x07 reserved bits, expect 0 */
-                v = i2c_smbus_read_byte_data(client, LTC4245_ADCADR);
-                if (v < 0 || (v & 0xf0) != 0)
-                        return -ENODEV;
-
-                /* check that the alert register appears at all locations */
-                if (ltc4245_check_control_reg(client, LTC4245_ALERT, 0xff))
-                        return -ENODEV;
-
-                /* check that the control register appears at all locations */
-                if (ltc4245_check_control_reg(client, LTC4245_CONTROL, 0xff))
-                        return -ENODEV;
-
-                /* check that register 0x06 bits b6 and b7 stay constant */
-                if (ltc4245_check_control_reg(client, LTC4245_GPIO, 0xc0))
-                        return -ENODEV;
-
-                /* check that register 0x07 bits b3-b0 stay constant */
-                if (ltc4245_check_control_reg(client, LTC4245_ADCADR, 0x0f))
-                        return -ENODEV;
-        }
-
-        strlcpy(info->type, "ltc4245", I2C_NAME_SIZE);
-        dev_info(&adapter->dev, "ltc4245 %s at address 0x%02x\n",
-                        kind < 0 ? "probed" : "forced",
-                        client->addr);
-
-        return 0;
-}
-
 static const struct i2c_device_id ltc4245_id[] = {
-        { "ltc4245", ltc4245 },
+        { "ltc4245", 0 },
         { }
 };
 MODULE_DEVICE_TABLE(i2c, ltc4245_id);
 
 /* This is the driver that will be inserted */
 static struct i2c_driver ltc4245_driver = {
-        .class          = I2C_CLASS_HWMON,
         .driver = {
                 .name   = "ltc4245",
         },
         .probe          = ltc4245_probe,
         .remove         = ltc4245_remove,
         .id_table       = ltc4245_id,
-        .detect         = ltc4245_detect,
-        .address_data   = &addr_data,
 };
 
 static int __init ltc4245_init(void)
diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c
index f7d6fe9c49ba..8f0b90ef8c76 100644
--- a/drivers/i2c/busses/i2c-amd756.c
+++ b/drivers/i2c/busses/i2c-amd756.c
@@ -364,7 +364,7 @@ static int __devinit amd756_probe(struct pci_dev *pdev,
         error = acpi_check_region(amd756_ioport, SMB_IOSIZE,
                                   amd756_driver.name);
         if (error)
-                return error;
+                return -ENODEV;
 
         if (!request_region(amd756_ioport, SMB_IOSIZE, amd756_driver.name)) {
                 dev_err(&pdev->dev, "SMB region 0x%x already in use!\n",
diff --git a/drivers/i2c/busses/i2c-amd8111.c b/drivers/i2c/busses/i2c-amd8111.c
index a7c59908c457..5b4ad86ca166 100644
--- a/drivers/i2c/busses/i2c-amd8111.c
+++ b/drivers/i2c/busses/i2c-amd8111.c
@@ -376,8 +376,10 @@ static int __devinit amd8111_probe(struct pci_dev *dev,
         smbus->size = pci_resource_len(dev, 0);
 
         error = acpi_check_resource_conflict(&dev->resource[0]);
-        if (error)
+        if (error) {
+                error = -ENODEV;
                 goto out_kfree;
+        }
 
         if (!request_region(smbus->base, smbus->size, amd8111_driver.name)) {
                 error = -EBUSY;
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 9d2c5adf5d4f..55edcfe5b851 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -732,8 +732,10 @@ static int __devinit i801_probe(struct pci_dev *dev, const struct pci_device_id
         }
 
         err = acpi_check_resource_conflict(&dev->resource[SMBBAR]);
-        if (err)
+        if (err) {
+                err = -ENODEV;
                 goto exit;
+        }
 
         err = pci_request_region(dev, SMBBAR, i801_driver.name);
         if (err) {
diff --git a/drivers/i2c/busses/i2c-isch.c b/drivers/i2c/busses/i2c-isch.c
index 9f6b8e0f8632..dba6eb053e2f 100644
--- a/drivers/i2c/busses/i2c-isch.c
+++ b/drivers/i2c/busses/i2c-isch.c
@@ -281,7 +281,7 @@ static int __devinit sch_probe(struct pci_dev *dev,
                 return -ENODEV;
         }
         if (acpi_check_region(sch_smba, SMBIOSIZE, sch_driver.name))
-                return -EBUSY;
+                return -ENODEV;
         if (!request_region(sch_smba, SMBIOSIZE, sch_driver.name)) {
                 dev_err(&dev->dev, "SMBus region 0x%x already in use!\n",
                         sch_smba);
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index a782c7a08f9e..d26a972aacaa 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -169,7 +169,7 @@ static int __devinit piix4_setup(struct pci_dev *PIIX4_dev,
         }
 
         if (acpi_check_region(piix4_smba, SMBIOSIZE, piix4_driver.name))
-                return -EBUSY;
+                return -ENODEV;
 
         if (!request_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) {
                 dev_err(&PIIX4_dev->dev, "SMBus region 0x%x already in use!\n",
@@ -260,7 +260,7 @@ static int __devinit piix4_setup_sb800(struct pci_dev *PIIX4_dev,
 
         piix4_smba = ((smba_en_hi << 8) | smba_en_lo) & 0xffe0;
         if (acpi_check_region(piix4_smba, SMBIOSIZE, piix4_driver.name))
-                return -EBUSY;
+                return -ENODEV;
 
         if (!request_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) {
                 dev_err(&PIIX4_dev->dev, "SMBus region 0x%x already in use!\n",
diff --git a/drivers/i2c/busses/i2c-sis96x.c b/drivers/i2c/busses/i2c-sis96x.c
index 8295885b2fdb..1649963b00dc 100644
--- a/drivers/i2c/busses/i2c-sis96x.c
+++ b/drivers/i2c/busses/i2c-sis96x.c
@@ -280,7 +280,7 @@ static int __devinit sis96x_probe(struct pci_dev *dev,
 
         retval = acpi_check_resource_conflict(&dev->resource[SIS96x_BAR]);
         if (retval)
-                return retval;
+                return -ENODEV;
 
         /* Everything is happy, let's grab the memory and set things up. */
         if (!request_region(sis96x_smbus_base, SMB_IOSIZE,
diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c
index 54d810a4d00f..e4b1543015af 100644
--- a/drivers/i2c/busses/i2c-viapro.c
+++ b/drivers/i2c/busses/i2c-viapro.c
@@ -365,7 +365,7 @@ static int __devinit vt596_probe(struct pci_dev *pdev,
 found:
         error = acpi_check_region(vt596_smba, 8, vt596_driver.name);
         if (error)
-                return error;
+                return -ENODEV;
 
         if (!request_region(vt596_smba, 8, vt596_driver.name)) {
                 dev_err(&pdev->dev, "SMBus region 0x%x already in use!\n",
diff --git a/drivers/leds/leds-pca9532.c b/drivers/leds/leds-pca9532.c
index 708a8017c21d..adc561eb59d2 100644
--- a/drivers/leds/leds-pca9532.c
+++ b/drivers/leds/leds-pca9532.c
@@ -19,9 +19,6 @@
 #include <linux/workqueue.h>
 #include <linux/leds-pca9532.h>
 
-static const unsigned short normal_i2c[] = { /*0x60,*/ I2C_CLIENT_END};
-I2C_CLIENT_INSMOD_1(pca9532);
-
 #define PCA9532_REG_PSC(i) (0x2+(i)*2)
 #define PCA9532_REG_PWM(i) (0x3+(i)*2)
 #define PCA9532_REG_LS0  0x6
diff --git a/drivers/macintosh/therm_adt746x.c b/drivers/macintosh/therm_adt746x.c
index fde377c60cca..556f0feaa4df 100644
--- a/drivers/macintosh/therm_adt746x.c
+++ b/drivers/macintosh/therm_adt746x.c
@@ -124,6 +124,8 @@ read_reg(struct thermostat* th, int reg)
         return data;
 }
 
+static struct i2c_driver thermostat_driver;
+
 static int
 attach_thermostat(struct i2c_adapter *adapter)
 {
@@ -148,7 +150,7 @@ attach_thermostat(struct i2c_adapter *adapter)
          * Let i2c-core delete that device on driver removal.
          * This is safe because i2c-core holds the core_lock mutex for us.
          */
-        list_add_tail(&client->detected, &client->driver->clients);
+        list_add_tail(&client->detected, &thermostat_driver.clients);
         return 0;
 }
 
diff --git a/drivers/macintosh/therm_pm72.c b/drivers/macintosh/therm_pm72.c
index a028598af2d3..ea32c7e5a9af 100644
--- a/drivers/macintosh/therm_pm72.c
+++ b/drivers/macintosh/therm_pm72.c
@@ -286,6 +286,8 @@ struct fcu_fan_table	fcu_fans[] = {
         },
 };
 
+static struct i2c_driver therm_pm72_driver;
+
 /*
  * Utility function to create an i2c_client structure and
  * attach it to one of u3 adapters
@@ -318,7 +320,7 @@ static struct i2c_client *attach_i2c_chip(int id, const char *name)
          * Let i2c-core delete that device on driver removal.
          * This is safe because i2c-core holds the core_lock mutex for us.
          */
-        list_add_tail(&clt->detected, &clt->driver->clients);
+        list_add_tail(&clt->detected, &therm_pm72_driver.clients);
         return clt;
 }
 
diff --git a/drivers/macintosh/windfarm_lm75_sensor.c b/drivers/macintosh/windfarm_lm75_sensor.c
index 529886c7a826..ed6426a10773 100644
--- a/drivers/macintosh/windfarm_lm75_sensor.c
+++ b/drivers/macintosh/windfarm_lm75_sensor.c
@@ -115,6 +115,8 @@ static int wf_lm75_probe(struct i2c_client *client,
         return rc;
 }
 
+static struct i2c_driver wf_lm75_driver;
+
 static struct i2c_client *wf_lm75_create(struct i2c_adapter *adapter,
                                              u8 addr, int ds1775,
                                              const char *loc)
@@ -157,7 +159,7 @@ static struct i2c_client *wf_lm75_create(struct i2c_adapter *adapter,
          * Let i2c-core delete that device on driver removal.
          * This is safe because i2c-core holds the core_lock mutex for us.
          */
-        list_add_tail(&client->detected, &client->driver->clients);
+        list_add_tail(&client->detected, &wf_lm75_driver.clients);
         return client;
  fail:
         return NULL;
diff --git a/drivers/macintosh/windfarm_max6690_sensor.c b/drivers/macintosh/windfarm_max6690_sensor.c
index e2a55ecda2b2..a67b349319e9 100644
--- a/drivers/macintosh/windfarm_max6690_sensor.c
+++ b/drivers/macintosh/windfarm_max6690_sensor.c
@@ -88,6 +88,8 @@ static int wf_max6690_probe(struct i2c_client *client,
         return rc;
 }
 
+static struct i2c_driver wf_max6690_driver;
+
 static struct i2c_client *wf_max6690_create(struct i2c_adapter *adapter,
                                             u8 addr, const char *loc)
 {
@@ -119,7 +121,7 @@ static struct i2c_client *wf_max6690_create(struct i2c_adapter *adapter,
          * Let i2c-core delete that device on driver removal.
          * This is safe because i2c-core holds the core_lock mutex for us.
          */
-        list_add_tail(&client->detected, &client->driver->clients);
+        list_add_tail(&client->detected, &wf_max6690_driver.clients);
         return client;
 
  fail:
diff --git a/drivers/macintosh/windfarm_smu_sat.c b/drivers/macintosh/windfarm_smu_sat.c
index 5da729e58f99..e20330a28959 100644
--- a/drivers/macintosh/windfarm_smu_sat.c
+++ b/drivers/macintosh/windfarm_smu_sat.c
@@ -194,6 +194,8 @@ static struct wf_sensor_ops wf_sat_ops = {
         .owner          = THIS_MODULE,
 };
 
+static struct i2c_driver wf_sat_driver;
+
 static void wf_sat_create(struct i2c_adapter *adapter, struct device_node *dev)
 {
         struct i2c_board_info info;
@@ -222,7 +224,7 @@ static void wf_sat_create(struct i2c_adapter *adapter, struct device_node *dev)
          * Let i2c-core delete that device on driver removal.
          * This is safe because i2c-core holds the core_lock mutex for us.
          */
-        list_add_tail(&client->detected, &client->driver->clients);
+        list_add_tail(&client->detected, &wf_sat_driver.clients);
 }
 
 static int wf_sat_probe(struct i2c_client *client,
diff --git a/drivers/mfd/ab3100-core.c b/drivers/mfd/ab3100-core.c
index 5447da16a170..613481028272 100644
--- a/drivers/mfd/ab3100-core.c
+++ b/drivers/mfd/ab3100-core.c
@@ -57,8 +57,6 @@
  * The AB3100 is usually assigned address 0x48 (7-bit)
  * The chip is defined in the platform i2c_board_data section.
  */
-static unsigned short normal_i2c[] = { 0x48, I2C_CLIENT_END };
-I2C_CLIENT_INSMOD_1(ab3100);
 
 u8 ab3100_get_chip_type(struct ab3100 *ab3100)
 {
@@ -966,7 +964,7 @@ static int __exit ab3100_remove(struct i2c_client *client)
 }
 
 static const struct i2c_device_id ab3100_id[] = {
-        { "ab3100", ab3100 },
+        { "ab3100", 0 },
         { }
 };
 MODULE_DEVICE_TABLE(i2c, ab3100_id);
diff --git a/drivers/misc/eeprom/max6875.c b/drivers/misc/eeprom/max6875.c
index 3c0c58eed347..5a6b2bce8ad5 100644
--- a/drivers/misc/eeprom/max6875.c
+++ b/drivers/misc/eeprom/max6875.c
@@ -33,12 +33,6 @@
 #include <linux/i2c.h>
 #include <linux/mutex.h>
 
-/* Do not scan - the MAX6875 access method will write to some EEPROM chips */
-static const unsigned short normal_i2c[] = { I2C_CLIENT_END };
-
-/* Insmod parameters */
-I2C_CLIENT_INSMOD_1(max6875);
-
 /* The MAX6875 can only read/write 16 bytes at a time */
 #define SLICE_SIZE                      16
 #define SLICE_BITS                      4
@@ -146,31 +140,21 @@ static struct bin_attribute user_eeprom_attr = {
         .read = max6875_read,
 };
 
-/* Return 0 if detection is successful, -ENODEV otherwise */
-static int max6875_detect(struct i2c_client *client, int kind,
-                          struct i2c_board_info *info)
+static int max6875_probe(struct i2c_client *client,
+                         const struct i2c_device_id *id)
 {
         struct i2c_adapter *adapter = client->adapter;
+        struct max6875_data *data;
+        int err;
 
         if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WRITE_BYTE_DATA
                                      | I2C_FUNC_SMBUS_READ_BYTE))
                 return -ENODEV;
 
-        /* Only check even addresses */
+        /* Only bind to even addresses */
         if (client->addr & 1)
                 return -ENODEV;
 
-        strlcpy(info->type, "max6875", I2C_NAME_SIZE);
-
-        return 0;
-}
-
-static int max6875_probe(struct i2c_client *client,
-                         const struct i2c_device_id *id)
-{
-        struct max6875_data *data;
-        int err;
-
         if (!(data = kzalloc(sizeof(struct max6875_data), GFP_KERNEL)))
                 return -ENOMEM;
 
@@ -222,9 +206,6 @@ static struct i2c_driver max6875_driver = {
         .probe          = max6875_probe,
         .remove         = max6875_remove,
         .id_table       = max6875_id,
-
-        .detect         = max6875_detect,
-        .address_data   = &addr_data,
 };
 
 static int __init max6875_init(void)
diff --git a/drivers/staging/iio/light/tsl2561.c b/drivers/staging/iio/light/tsl2561.c
index ea8a5efc19bc..fc2107f4c049 100644
--- a/drivers/staging/iio/light/tsl2561.c
+++ b/drivers/staging/iio/light/tsl2561.c
@@ -239,10 +239,6 @@ static int __devexit tsl2561_remove(struct i2c_client *client)
         return tsl2561_powerdown(client);
 }
 
-static unsigned short normal_i2c[] = { 0x29, 0x39, 0x49, I2C_CLIENT_END };
-
-I2C_CLIENT_INSMOD;
-
 static const struct i2c_device_id tsl2561_id[] = {
         { "tsl2561", 0 },
         { }
diff --git a/drivers/w1/masters/ds2482.c b/drivers/w1/masters/ds2482.c
index df52cb355f7d..406caa6a71cb 100644
--- a/drivers/w1/masters/ds2482.c
+++ b/drivers/w1/masters/ds2482.c
@@ -24,19 +24,6 @@
 #include "../w1_int.h"
 
 /**
- * Address is selected using 2 pins, resulting in 4 possible addresses.
- *  0x18, 0x19, 0x1a, 0x1b
- * However, the chip cannot be detected without doing an i2c write,
- * so use the force module parameter.
- */
-static const unsigned short normal_i2c[] = { I2C_CLIENT_END };
-
-/**
- * Insmod parameters
- */
-I2C_CLIENT_INSMOD_1(ds2482);
-
-/**
  * The DS2482 registers - there are 3 registers that are addressed by a read
  * pointer. The read pointer is set by the last command executed.
  *
@@ -96,8 +83,6 @@ static const u8 ds2482_chan_rd[8] =
 
 static int ds2482_probe(struct i2c_client *client,
                         const struct i2c_device_id *id);
-static int ds2482_detect(struct i2c_client *client, int kind,
-                         struct i2c_board_info *info);
 static int ds2482_remove(struct i2c_client *client);
 
 
@@ -117,8 +102,6 @@ static struct i2c_driver ds2482_driver = {
         .probe          = ds2482_probe,
         .remove         = ds2482_remove,
         .id_table       = ds2482_id,
-        .detect         = ds2482_detect,
-        .address_data   = &addr_data,
 };
 
 /*
@@ -425,19 +408,6 @@ static u8 ds2482_w1_reset_bus(void *data)
 }
 
 
-static int ds2482_detect(struct i2c_client *client, int kind,
-                         struct i2c_board_info *info)
-{
-        if (!i2c_check_functionality(client->adapter,
-                                     I2C_FUNC_SMBUS_WRITE_BYTE_DATA |
-                                     I2C_FUNC_SMBUS_BYTE))
-                return -ENODEV;
-
-        strlcpy(info->type, "ds2482", I2C_NAME_SIZE);
-
-        return 0;
-}
-
 static int ds2482_probe(struct i2c_client *client,
                         const struct i2c_device_id *id)
 {
@@ -446,6 +416,11 @@ static int ds2482_probe(struct i2c_client *client,
         int temp1;
         int idx;
 
+        if (!i2c_check_functionality(client->adapter,
+                                     I2C_FUNC_SMBUS_WRITE_BYTE_DATA |
+                                     I2C_FUNC_SMBUS_BYTE))
+                return -ENODEV;
+
         if (!(data = kzalloc(sizeof(struct ds2482_data), GFP_KERNEL))) {
                 err = -ENOMEM;
                 goto exit;