1 files changed, 118 insertions, 238 deletions

diff --git a/drivers/hwmon/hdaps.c b/drivers/hwmon/hdaps.c
index eaebfc14c933..4c56411f3993 100644
--- a/drivers/hwmon/hdaps.c
+++ b/drivers/hwmon/hdaps.c
@@ -5,10 +5,10 @@
  * Copyright (C) 2005 Jesper Juhl <jesper.juhl@gmail.com>
  *
  * The HardDisk Active Protection System (hdaps) is present in the IBM ThinkPad
- * T41, T42, T43, R51, and X40, at least.  It provides a basic two-axis
- * accelerometer and other data, such as the device's temperature.
+ * T41, T42, T43, R50, R50p, R51, and X40, at least.  It provides a basic
+ * two-axis accelerometer and other data, such as the device's temperature.
  *
- * Based on the document by Mark A. Smith available at
+ * This driver is based on the document by Mark A. Smith available at
  * http://www.almaden.ibm.com/cs/people/marksmith/tpaps.html and a lot of trial
  * and error.
  *
@@ -36,12 +36,7 @@
 #include <asm/io.h>
 
 #define HDAPS_LOW_PORT          0x1600  /* first port used by hdaps */
-#define HDAPS_NR_PORTS          0x30    /* 0x1600 - 0x162f */
-
-#define STATE_FRESH             0x50    /* accelerometer data is fresh */
-
-#define REFRESH_ASYNC           0x00    /* do asynchronous refresh */
-#define REFRESH_SYNC            0x01    /* do synchronous refresh */
+#define HDAPS_NR_PORTS          0x30    /* number of ports: 0x1600 - 0x162f */
 
 #define HDAPS_PORT_STATE        0x1611  /* device state */
 #define HDAPS_PORT_YPOS         0x1612  /* y-axis position */
@@ -53,7 +48,7 @@
 #define HDAPS_PORT_UNKNOWN      0x161c  /* what is this? */
 #define HDAPS_PORT_KMACT        0x161d  /* keyboard or mouse activity */
 
-#define HDAPS_READ_MASK         0xff    /* some reads have the low 8 bits set */
+#define STATE_FRESH             0x50    /* accelerometer data is fresh */
 
 #define KEYBD_MASK              0x20    /* set if keyboard activity */
 #define MOUSE_MASK              0x40    /* set if mouse activity */
@@ -63,12 +58,11 @@
 #define INIT_TIMEOUT_MSECS      4000    /* wait up to 4s for device init ... */
 #define INIT_WAIT_MSECS         200     /* ... in 200ms increments */
 
-static struct platform_device *pdev;
-static struct input_dev hdaps_idev;
+#define HDAPS_POLL_PERIOD       (HZ/20) /* poll for input every 1/20s */
+#define HDAPS_INPUT_FUZZ        4       /* input event threshold */
+
 static struct timer_list hdaps_timer;
-static unsigned int hdaps_mousedev_threshold = 4;
-static unsigned long hdaps_poll_ms = 50;
-static unsigned int hdaps_mousedev;
+static struct platform_device *pdev;
 static unsigned int hdaps_invert;
 static u8 km_activity;
 static int rest_x;
@@ -81,14 +75,14 @@ static DECLARE_MUTEX(hdaps_sem);
  */
 static inline u8 __get_latch(u16 port)
 {
-        return inb(port) & HDAPS_READ_MASK;
+        return inb(port) & 0xff;
 }
 
 /*
- * __check_latch - Check a port latch for a given value.  Callers must hold
- * hdaps_sem.  Returns zero if the port contains the given value.
+ * __check_latch - Check a port latch for a given value.  Returns zero if the
+ * port contains the given value.  Callers must hold hdaps_sem.
  */
-static inline unsigned int __check_latch(u16 port, u8 val)
+static inline int __check_latch(u16 port, u8 val)
 {
         if (__get_latch(port) == val)
                 return 0;
@@ -99,7 +93,7 @@ static inline unsigned int __check_latch(u16 port, u8 val)
  * __wait_latch - Wait up to 100us for a port latch to get a certain value,
  * returning zero if the value is obtained.  Callers must hold hdaps_sem.
  */
-static unsigned int __wait_latch(u16 port, u8 val)
+static int __wait_latch(u16 port, u8 val)
 {
         unsigned int i;
 
@@ -109,59 +103,42 @@ static unsigned int __wait_latch(u16 port, u8 val)
                 udelay(5);
         }
 
-        return -EINVAL;
+        return -EIO;
 }
 
 /*
- * __device_refresh - Request a refresh from the accelerometer.
- *
- * If sync is REFRESH_SYNC, we perform a synchronous refresh and will wait.
- * Returns zero if successful and nonzero on error.
- *
- * If sync is REFRESH_ASYNC, we merely kick off a new refresh if the device is
- * not up-to-date.  Always returns zero.
- *
- * Callers must hold hdaps_sem.
+ * __device_refresh - request a refresh from the accelerometer.  Does not wait
+ * for refresh to complete.  Callers must hold hdaps_sem.
  */
-static int __device_refresh(unsigned int sync)
+static void __device_refresh(void)
 {
-        u8 state;
-
-        udelay(100);
-
-        state = inb(0x1604);
-        if (state == STATE_FRESH)
-                return 0;
-
-        outb(0x11, 0x1610);
-        outb(0x01, 0x161f);
-        if (sync == REFRESH_ASYNC)
-                return 0;
+        udelay(200);
+        if (inb(0x1604) != STATE_FRESH) {
+                outb(0x11, 0x1610);
+                outb(0x01, 0x161f);
+        }
+}
 
+/*
+ * __device_refresh_sync - request a synchronous refresh from the
+ * accelerometer.  We wait for the refresh to complete.  Returns zero if
+ * successful and nonzero on error.  Callers must hold hdaps_sem.
+ */
+static int __device_refresh_sync(void)
+{
+        __device_refresh();
         return __wait_latch(0x1604, STATE_FRESH);
 }
 
 /*
- * __device_complete - Indicate to the accelerometer that we are done reading
+ * __device_complete - indicate to the accelerometer that we are done reading
  * data, and then initiate an async refresh.  Callers must hold hdaps_sem.
  */
 static inline void __device_complete(void)
 {
         inb(0x161f);
         inb(0x1604);
-        __device_refresh(REFRESH_ASYNC);
-}
-
-static int __hdaps_readb_one(unsigned int port, u8 *val)
-{
-        /* do a sync refresh -- we need to be sure that we read fresh data */
-        if (__device_refresh(REFRESH_SYNC))
-                return -EIO;
-
-        *val = inb(port);
-        __device_complete();
-
-        return 0;
+        __device_refresh();
 }
 
 /*
@@ -174,17 +151,26 @@ static int hdaps_readb_one(unsigned int port, u8 *val)
         int ret;
 
         down(&hdaps_sem);
-        ret = __hdaps_readb_one(port, val);
-        up(&hdaps_sem);
 
+        /* do a sync refresh -- we need to be sure that we read fresh data */
+        ret = __device_refresh_sync();
+        if (ret)
+                goto out;
+
+        *val = inb(port);
+        __device_complete();
+
+out:
+        up(&hdaps_sem);
         return ret;
 }
 
+/* __hdaps_read_pair - internal lockless helper for hdaps_read_pair(). */
 static int __hdaps_read_pair(unsigned int port1, unsigned int port2,
                              int *x, int *y)
 {
         /* do a sync refresh -- we need to be sure that we read fresh data */
-        if (__device_refresh(REFRESH_SYNC))
+        if (__device_refresh_sync())
                 return -EIO;
 
         *y = inw(port2);
@@ -217,11 +203,13 @@ static int hdaps_read_pair(unsigned int port1, unsigned int port2,
         return ret;
 }
 
-/* initialize the accelerometer */
+/*
+ * hdaps_device_init - initialize the accelerometer.  Returns zero on success
+ * and negative error code on failure.  Can sleep.
+ */
 static int hdaps_device_init(void)
 {
-        unsigned int total_msecs = INIT_TIMEOUT_MSECS;
-        int ret = -ENXIO;
+        int total, ret = -ENXIO;
 
         down(&hdaps_sem);
 
@@ -231,8 +219,10 @@ static int hdaps_device_init(void)
                 goto out;
 
         /*
-         * The 0x03 value appears to only work on some thinkpads, such as the
-         * T42p.  Others return 0x01.
+         * Most ThinkPads return 0x01.
+         *
+         * Others--namely the R50p, T41p, and T42p--return 0x03.  These laptops
+         * have "inverted" axises.
          *
          * The 0x02 value occurs when the chip has been previously initialized.
          */
@@ -267,24 +257,23 @@ static int hdaps_device_init(void)
         outb(0x01, 0x161f);
         if (__wait_latch(0x161f, 0x00))
                 goto out;
-        if (__device_refresh(REFRESH_SYNC))
+        if (__device_refresh_sync())
                 goto out;
         if (__wait_latch(0x1611, 0x00))
                 goto out;
 
         /* we have done our dance, now let's wait for the applause */
-        while (total_msecs > 0) {
-                u8 ignored;
+        for (total = INIT_TIMEOUT_MSECS; total > 0; total -= INIT_WAIT_MSECS) {
+                int x, y;
 
                 /* a read of the device helps push it into action */
-                __hdaps_readb_one(HDAPS_PORT_UNKNOWN, &ignored);
+                __hdaps_read_pair(HDAPS_PORT_XPOS, HDAPS_PORT_YPOS, &x, &y);
                 if (!__wait_latch(0x1611, 0x02)) {
                         ret = 0;
                         break;
                 }
 
                 msleep(INIT_WAIT_MSECS);
-                total_msecs -= INIT_WAIT_MSECS;
         }
 
 out:
@@ -293,96 +282,6 @@ out:
 }
 
 
-/* Input class stuff */
-
-/*
- * hdaps_calibrate - Zero out our "resting" values. Callers must hold hdaps_sem.
- */
-static void hdaps_calibrate(void)
-{
-        int x, y;
-
-        if (__hdaps_read_pair(HDAPS_PORT_XPOS, HDAPS_PORT_YPOS, &x, &y))
-                return;
-
-        rest_x = x;
-        rest_y = y;
-}
-
-static void hdaps_mousedev_poll(unsigned long unused)
-{
-        int x, y;
-
-        /* Cannot sleep.  Try nonblockingly.  If we fail, try again later. */
-        if (down_trylock(&hdaps_sem)) {
-                mod_timer(&hdaps_timer,jiffies+msecs_to_jiffies(hdaps_poll_ms));
-                return;
-        }
-
-        if (__hdaps_read_pair(HDAPS_PORT_XPOS, HDAPS_PORT_YPOS, &x, &y))
-                goto out;
-
-        x -= rest_x;
-        y -= rest_y;
-        if (abs(x) > hdaps_mousedev_threshold)
-                input_report_rel(&hdaps_idev, REL_X, x);
-        if (abs(y) > hdaps_mousedev_threshold)
-                input_report_rel(&hdaps_idev, REL_Y, y);
-        input_sync(&hdaps_idev);
-
-        mod_timer(&hdaps_timer, jiffies + msecs_to_jiffies(hdaps_poll_ms));
-
-out:
-        up(&hdaps_sem);
-}
-
-/*
- * hdaps_mousedev_enable - enable the input class device.  Can sleep.
- */
-static void hdaps_mousedev_enable(void)
-{
-        down(&hdaps_sem);
-
-        /* calibrate the device before enabling */
-        hdaps_calibrate();
-
-        /* initialize the input class */
-        init_input_dev(&hdaps_idev);
-        hdaps_idev.dev = &pdev->dev;
-        hdaps_idev.evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
-        hdaps_idev.relbit[0] = BIT(REL_X) | BIT(REL_Y);
-        hdaps_idev.keybit[LONG(BTN_LEFT)] = BIT(BTN_LEFT);
-        input_register_device(&hdaps_idev);
-
-        /* start up our timer */
-        init_timer(&hdaps_timer);
-        hdaps_timer.function = hdaps_mousedev_poll;
-        hdaps_timer.expires = jiffies + msecs_to_jiffies(hdaps_poll_ms);
-        add_timer(&hdaps_timer);
-
-        hdaps_mousedev = 1;
-
-        up(&hdaps_sem);
-
-        printk(KERN_INFO "hdaps: input device enabled.\n");
-}
-
-/*
- * hdaps_mousedev_disable - disable the input class device.  Caller must hold
- * hdaps_sem.
- */
-static void hdaps_mousedev_disable(void)
-{
-        down(&hdaps_sem);
-        if (hdaps_mousedev) {
-                hdaps_mousedev = 0;
-                del_timer_sync(&hdaps_timer);
-                input_unregister_device(&hdaps_idev);
-        }
-        up(&hdaps_sem);
-}
-
-
 /* Device model stuff */
 
 static int hdaps_probe(struct device *dev)
@@ -412,6 +311,49 @@ static struct device_driver hdaps_driver = {
         .resume = hdaps_resume
 };
 
+/* Input class stuff */
+
+static struct input_dev hdaps_idev = {
+        .name = "hdaps",
+        .evbit = { BIT(EV_ABS) },
+        .absbit = { BIT(ABS_X) | BIT(ABS_Y) },
+        .absmin  = { [ABS_X] = -256, [ABS_Y] = -256 },
+        .absmax  = { [ABS_X] = 256, [ABS_Y] = 256 },
+        .absfuzz = { [ABS_X] = HDAPS_INPUT_FUZZ, [ABS_Y] = HDAPS_INPUT_FUZZ },
+        .absflat = { [ABS_X] = HDAPS_INPUT_FUZZ, [ABS_Y] = HDAPS_INPUT_FUZZ },
+};
+
+/*
+ * hdaps_calibrate - Set our "resting" values.  Callers must hold hdaps_sem.
+ */
+static void hdaps_calibrate(void)
+{
+        __hdaps_read_pair(HDAPS_PORT_XPOS, HDAPS_PORT_YPOS, &rest_x, &rest_y);
+}
+
+static void hdaps_mousedev_poll(unsigned long unused)
+{
+        int x, y;
+
+        /* Cannot sleep.  Try nonblockingly.  If we fail, try again later. */
+        if (down_trylock(&hdaps_sem)) {
+                mod_timer(&hdaps_timer,jiffies + HDAPS_POLL_PERIOD);
+                return;
+        }
+
+        if (__hdaps_read_pair(HDAPS_PORT_XPOS, HDAPS_PORT_YPOS, &x, &y))
+                goto out;
+
+        input_report_abs(&hdaps_idev, ABS_X, x - rest_x);
+        input_report_abs(&hdaps_idev, ABS_Y, y - rest_y);
+        input_sync(&hdaps_idev);
+
+        mod_timer(&hdaps_timer, jiffies + HDAPS_POLL_PERIOD);
+
+out:
+        up(&hdaps_sem);
+}
+
 
 /* Sysfs Files */
 
@@ -517,69 +459,6 @@ static ssize_t hdaps_invert_store(struct device *dev,
         return count;
 }
 
-static ssize_t hdaps_mousedev_show(struct device *dev,
-                                   struct device_attribute *attr, char *buf)
-{
-        return sprintf(buf, "%d\n", hdaps_mousedev);
-}
-
-static ssize_t hdaps_mousedev_store(struct device *dev,
-                                    struct device_attribute *attr,
-                                    const char *buf, size_t count)
-{
-        int enable;
-
-        if (sscanf(buf, "%d", &enable) != 1)
-                return -EINVAL;
-
-        if (enable == 1)
-                hdaps_mousedev_enable();
-        else if (enable == 0)
-                hdaps_mousedev_disable();
-        else
-                return -EINVAL;
-
-        return count;
-}
-
-static ssize_t hdaps_poll_show(struct device *dev,
-                               struct device_attribute *attr, char *buf)
-{
-        return sprintf(buf, "%lu\n", hdaps_poll_ms);
-}
-
-static ssize_t hdaps_poll_store(struct device *dev,
-                                struct device_attribute *attr,
-                                const char *buf, size_t count)
-{
-        unsigned int poll;
-
-        if (sscanf(buf, "%u", &poll) != 1 || poll == 0)
-                return -EINVAL;
-        hdaps_poll_ms = poll;
-
-        return count;
-}
-
-static ssize_t hdaps_threshold_show(struct device *dev,
-                                    struct device_attribute *attr, char *buf)
-{
-        return sprintf(buf, "%u\n", hdaps_mousedev_threshold);
-}
-
-static ssize_t hdaps_threshold_store(struct device *dev,
-                                     struct device_attribute *attr,
-                                     const char *buf, size_t count)
-{
-        unsigned int threshold;
-
-        if (sscanf(buf, "%u", &threshold) != 1 || threshold == 0)
-                return -EINVAL;
-        hdaps_mousedev_threshold = threshold;
-
-        return count;
-}
-
 static DEVICE_ATTR(position, 0444, hdaps_position_show, NULL);
 static DEVICE_ATTR(variance, 0444, hdaps_variance_show, NULL);
 static DEVICE_ATTR(temp1, 0444, hdaps_temp1_show, NULL);
@@ -588,10 +467,6 @@ static DEVICE_ATTR(keyboard_activity, 0444, hdaps_keyboard_activity_show, NULL);
 static DEVICE_ATTR(mouse_activity, 0444, hdaps_mouse_activity_show, NULL);
 static DEVICE_ATTR(calibrate, 0644, hdaps_calibrate_show,hdaps_calibrate_store);
 static DEVICE_ATTR(invert, 0644, hdaps_invert_show, hdaps_invert_store);
-static DEVICE_ATTR(mousedev, 0644, hdaps_mousedev_show, hdaps_mousedev_store);
-static DEVICE_ATTR(mousedev_poll_ms, 0644, hdaps_poll_show, hdaps_poll_store);
-static DEVICE_ATTR(mousedev_threshold, 0644, hdaps_threshold_show,
-                   hdaps_threshold_store);
 
 static struct attribute *hdaps_attributes[] = {
         &dev_attr_position.attr,
@@ -601,9 +476,6 @@ static struct attribute *hdaps_attributes[] = {
         &dev_attr_keyboard_activity.attr,
         &dev_attr_mouse_activity.attr,
         &dev_attr_calibrate.attr,
-        &dev_attr_mousedev.attr,
-        &dev_attr_mousedev_threshold.attr,
-        &dev_attr_mousedev_poll_ms.attr,
         &dev_attr_invert.attr,
         NULL,
 };
@@ -619,7 +491,7 @@ static struct attribute_group hdaps_attribute_group = {
  * XXX: We should be able to return nonzero and halt the detection process.
  * But there is a bug in dmi_check_system() where a nonzero return from the
  * first match will result in a return of failure from dmi_check_system().
- * I fixed this; the patch is in 2.6-mm.  Once in Linus's tree we can make
+ * I fixed this; the patch is 2.6-git.  Once in a released tree, we can make
  * hdaps_dmi_match_invert() return hdaps_dmi_match(), which in turn returns 1.
  */
 static int hdaps_dmi_match(struct dmi_system_id *id)
@@ -668,6 +540,7 @@ static int __init hdaps_init(void)
                 HDAPS_DMI_MATCH_NORMAL("ThinkPad T42"),
                 HDAPS_DMI_MATCH_NORMAL("ThinkPad T43"),
                 HDAPS_DMI_MATCH_NORMAL("ThinkPad X40"),
+                HDAPS_DMI_MATCH_NORMAL("ThinkPad X41 Tablet"),
                 { .ident = NULL }
         };
 
@@ -696,8 +569,18 @@ static int __init hdaps_init(void)
         if (ret)
                 goto out_device;
 
-        if (hdaps_mousedev)
-                hdaps_mousedev_enable();
+        /* initial calibrate for the input device */
+        hdaps_calibrate();
+
+        /* initialize the input class */
+        hdaps_idev.dev = &pdev->dev;
+        input_register_device(&hdaps_idev);
+
+        /* start up our timer for the input device */
+        init_timer(&hdaps_timer);
+        hdaps_timer.function = hdaps_mousedev_poll;
+        hdaps_timer.expires = jiffies + HDAPS_POLL_PERIOD;
+        add_timer(&hdaps_timer);
 
         printk(KERN_INFO "hdaps: driver successfully loaded.\n");
         return 0;
@@ -715,8 +598,8 @@ out:
 
 static void __exit hdaps_exit(void)
 {
-        hdaps_mousedev_disable();
-
+        del_timer_sync(&hdaps_timer);
+        input_unregister_device(&hdaps_idev);
         sysfs_remove_group(&pdev->dev.kobj, &hdaps_attribute_group);
         platform_device_unregister(pdev);
         driver_unregister(&hdaps_driver);
@@ -728,9 +611,6 @@ static void __exit hdaps_exit(void)
 module_init(hdaps_init);
 module_exit(hdaps_exit);
 
-module_param_named(mousedev, hdaps_mousedev, bool, 0);
-MODULE_PARM_DESC(mousedev, "enable the input class device");
-
 module_param_named(invert, hdaps_invert, bool, 0);
 MODULE_PARM_DESC(invert, "invert data along each axis");