aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--MAINTAINERS2
-rw-r--r--arch/arm/configs/magician_defconfig6
-rw-r--r--arch/arm/include/asm/sizes.h1
-rw-r--r--arch/arm/mach-at91/include/mach/board.h2
-rw-r--r--arch/arm/mach-omap1/clock.c21
-rw-r--r--arch/arm/mach-pxa/Kconfig9
-rw-r--r--arch/arm/mach-pxa/Makefile1
-rw-r--r--arch/arm/mach-pxa/cm-x2xx.c2
-rw-r--r--arch/arm/mach-pxa/colibri-pxa300.c11
-rw-r--r--arch/arm/mach-pxa/colibri-pxa320.c10
-rw-r--r--arch/arm/mach-pxa/colibri-pxa3xx.c35
-rw-r--r--arch/arm/mach-pxa/csb701.c5
-rw-r--r--arch/arm/mach-pxa/e740.c2
-rw-r--r--arch/arm/mach-pxa/e750.c2
-rw-r--r--arch/arm/mach-pxa/e800.c2
-rw-r--r--arch/arm/mach-pxa/em-x270.c86
-rw-r--r--arch/arm/mach-pxa/include/mach/colibri.h7
-rw-r--r--arch/arm/mach-pxa/include/mach/magician.h4
-rw-r--r--arch/arm/mach-pxa/include/mach/palmld.h1
-rw-r--r--arch/arm/mach-pxa/include/mach/palmt5.h1
-rw-r--r--arch/arm/mach-pxa/include/mach/palmte2.h68
-rw-r--r--arch/arm/mach-pxa/include/mach/palmtx.h2
-rw-r--r--arch/arm/mach-pxa/magician.c84
-rw-r--r--arch/arm/mach-pxa/mioa701.c6
-rw-r--r--arch/arm/mach-pxa/palmld.c36
-rw-r--r--arch/arm/mach-pxa/palmt5.c35
-rw-r--r--arch/arm/mach-pxa/palmte2.c466
-rw-r--r--arch/arm/mach-pxa/palmtx.c35
-rw-r--r--arch/arm/mach-pxa/tosa.c2
-rw-r--r--arch/arm/mm/mmu.c11
-rw-r--r--drivers/usb/host/ohci-at91.c4
31 files changed, 864 insertions, 95 deletions
diff --git a/MAINTAINERS b/MAINTAINERS
index d96e7451891f..1f02d96a5dbf 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -636,7 +636,7 @@ P: Dirk Opfer
636M: dirk@opfer-online.de 636M: dirk@opfer-online.de
637S: Maintained 637S: Maintained
638 638
639ARM/PALMTX,PALMT5,PALMLD SUPPORT 639ARM/PALMTX,PALMT5,PALMLD,PALMTE2 SUPPORT
640P: Marek Vasut 640P: Marek Vasut
641M: marek.vasut@gmail.com 641M: marek.vasut@gmail.com
642W: http://hackndev.com 642W: http://hackndev.com
diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig
index 82428c2f234c..f56837f69ca7 100644
--- a/arch/arm/configs/magician_defconfig
+++ b/arch/arm/configs/magician_defconfig
@@ -1183,7 +1183,11 @@ CONFIG_RTC_INTF_DEV=y
1183CONFIG_RTC_DRV_SA1100=y 1183CONFIG_RTC_DRV_SA1100=y
1184# CONFIG_RTC_DRV_PXA is not set 1184# CONFIG_RTC_DRV_PXA is not set
1185# CONFIG_DMADEVICES is not set 1185# CONFIG_DMADEVICES is not set
1186# CONFIG_REGULATOR is not set 1186CONFIG_REGULATOR=y
1187# CONFIG_REGULATOR_DEBUG is not set
1188# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
1189# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
1190CONFIG_REGULATOR_BQ24022=y
1187# CONFIG_UIO is not set 1191# CONFIG_UIO is not set
1188# CONFIG_STAGING is not set 1192# CONFIG_STAGING is not set
1189 1193
diff --git a/arch/arm/include/asm/sizes.h b/arch/arm/include/asm/sizes.h
index c10d1aa4b487..ada93a8fc2ef 100644
--- a/arch/arm/include/asm/sizes.h
+++ b/arch/arm/include/asm/sizes.h
@@ -32,6 +32,7 @@
32#define SZ_4K 0x00001000 32#define SZ_4K 0x00001000
33#define SZ_8K 0x00002000 33#define SZ_8K 0x00002000
34#define SZ_16K 0x00004000 34#define SZ_16K 0x00004000
35#define SZ_32K 0x00008000
35#define SZ_64K 0x00010000 36#define SZ_64K 0x00010000
36#define SZ_128K 0x00020000 37#define SZ_128K 0x00020000
37#define SZ_256K 0x00040000 38#define SZ_256K 0x00040000
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index 793fe7b25f36..e6afff849b85 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -87,7 +87,7 @@ extern void __init at91_add_device_eth(struct at91_eth_data *data);
87 /* USB Host */ 87 /* USB Host */
88struct at91_usbh_data { 88struct at91_usbh_data {
89 u8 ports; /* number of ports on root hub */ 89 u8 ports; /* number of ports on root hub */
90 u8 vbus_pin[]; /* port power-control pin */ 90 u8 vbus_pin[2]; /* port power-control pin */
91}; 91};
92extern void __init at91_add_device_usbh(struct at91_usbh_data *data); 92extern void __init at91_add_device_usbh(struct at91_usbh_data *data);
93 93
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index dafe4f71d15f..336e51dc6127 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -590,27 +590,28 @@ static void omap1_init_ext_clk(struct clk * clk)
590static int omap1_clk_enable(struct clk *clk) 590static int omap1_clk_enable(struct clk *clk)
591{ 591{
592 int ret = 0; 592 int ret = 0;
593
593 if (clk->usecount++ == 0) { 594 if (clk->usecount++ == 0) {
594 if (likely(clk->parent)) { 595 if (clk->parent) {
595 ret = omap1_clk_enable(clk->parent); 596 ret = omap1_clk_enable(clk->parent);
596 597 if (ret)
597 if (unlikely(ret != 0)) { 598 goto err;
598 clk->usecount--;
599 return ret;
600 }
601 599
602 if (clk->flags & CLOCK_NO_IDLE_PARENT) 600 if (clk->flags & CLOCK_NO_IDLE_PARENT)
603 omap1_clk_deny_idle(clk->parent); 601 omap1_clk_deny_idle(clk->parent);
604 } 602 }
605 603
606 ret = clk->ops->enable(clk); 604 ret = clk->ops->enable(clk);
607 605 if (ret) {
608 if (unlikely(ret != 0) && clk->parent) { 606 if (clk->parent)
609 omap1_clk_disable(clk->parent); 607 omap1_clk_disable(clk->parent);
610 clk->usecount--; 608 goto err;
611 } 609 }
612 } 610 }
611 return ret;
613 612
613err:
614 clk->usecount--;
614 return ret; 615 return ret;
615} 616}
616 617
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 96a2006cb597..3e66d9099eab 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -343,6 +343,15 @@ config ARCH_PXA_PALM
343 bool "PXA based Palm PDAs" 343 bool "PXA based Palm PDAs"
344 select HAVE_PWM 344 select HAVE_PWM
345 345
346config MACH_PALMTE2
347 bool "Palm Tungsten|E2"
348 default y
349 depends on ARCH_PXA_PALM
350 select PXA25x
351 help
352 Say Y here if you intend to run this kernel on a Palm Tungsten|E2
353 handheld computer.
354
346config MACH_PALMT5 355config MACH_PALMT5
347 bool "Palm Tungsten|T5" 356 bool "Palm Tungsten|T5"
348 default y 357 default y
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index c80e1bac4945..682dbf4e14b0 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -57,6 +57,7 @@ obj-$(CONFIG_MACH_E740) += e740.o
57obj-$(CONFIG_MACH_E750) += e750.o 57obj-$(CONFIG_MACH_E750) += e750.o
58obj-$(CONFIG_MACH_E400) += e400.o 58obj-$(CONFIG_MACH_E400) += e400.o
59obj-$(CONFIG_MACH_E800) += e800.o 59obj-$(CONFIG_MACH_E800) += e800.o
60obj-$(CONFIG_MACH_PALMTE2) += palmte2.o
60obj-$(CONFIG_MACH_PALMT5) += palmt5.o 61obj-$(CONFIG_MACH_PALMT5) += palmt5.o
61obj-$(CONFIG_MACH_PALMTX) += palmtx.o 62obj-$(CONFIG_MACH_PALMTX) += palmtx.o
62obj-$(CONFIG_MACH_PALMLD) += palmld.o 63obj-$(CONFIG_MACH_PALMLD) += palmld.o
diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
index 117b5435f8d5..b50ef39eabfc 100644
--- a/arch/arm/mach-pxa/cm-x2xx.c
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -121,7 +121,7 @@ static inline void cmx2xx_init_dm9000(void) {}
121/* UCB1400 touchscreen controller */ 121/* UCB1400 touchscreen controller */
122#if defined(CONFIG_TOUCHSCREEN_UCB1400) || defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE) 122#if defined(CONFIG_TOUCHSCREEN_UCB1400) || defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
123static struct platform_device cmx2xx_ts_device = { 123static struct platform_device cmx2xx_ts_device = {
124 .name = "ucb1400_ts", 124 .name = "ucb1400_core",
125 .id = -1, 125 .id = -1,
126}; 126};
127 127
diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c
index 10c2eaf93230..7c9c34c19ae2 100644
--- a/arch/arm/mach-pxa/colibri-pxa300.c
+++ b/arch/arm/mach-pxa/colibri-pxa300.c
@@ -15,7 +15,7 @@
15#include <linux/kernel.h> 15#include <linux/kernel.h>
16#include <linux/platform_device.h> 16#include <linux/platform_device.h>
17#include <linux/gpio.h> 17#include <linux/gpio.h>
18#include <net/ax88796.h> 18#include <linux/interrupt.h>
19 19
20#include <asm/mach-types.h> 20#include <asm/mach-types.h>
21#include <asm/sizes.h> 21#include <asm/sizes.h>
@@ -32,12 +32,13 @@
32 32
33#if defined(CONFIG_AX88796) 33#if defined(CONFIG_AX88796)
34#define COLIBRI_ETH_IRQ_GPIO mfp_to_gpio(GPIO26_GPIO) 34#define COLIBRI_ETH_IRQ_GPIO mfp_to_gpio(GPIO26_GPIO)
35
35/* 36/*
36 * Asix AX88796 Ethernet 37 * Asix AX88796 Ethernet
37 */ 38 */
38static struct ax_plat_data colibri_asix_platdata = { 39static struct ax_plat_data colibri_asix_platdata = {
39 .flags = AXFLG_MAC_FROMDEV, 40 .flags = 0, /* defined later */
40 .wordlength = 2 41 .wordlength = 2,
41}; 42};
42 43
43static struct resource colibri_asix_resource[] = { 44static struct resource colibri_asix_resource[] = {
@@ -49,7 +50,7 @@ static struct resource colibri_asix_resource[] = {
49 [1] = { 50 [1] = {
50 .start = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO), 51 .start = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO),
51 .end = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO), 52 .end = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO),
52 .flags = IORESOURCE_IRQ 53 .flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
53 } 54 }
54}; 55};
55 56
@@ -70,8 +71,8 @@ static mfp_cfg_t colibri_pxa300_eth_pin_config[] __initdata = {
70 71
71static void __init colibri_pxa300_init_eth(void) 72static void __init colibri_pxa300_init_eth(void)
72{ 73{
74 colibri_pxa3xx_init_eth(&colibri_asix_platdata);
73 pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa300_eth_pin_config)); 75 pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa300_eth_pin_config));
74 set_irq_type(gpio_to_irq(COLIBRI_ETH_IRQ_GPIO), IRQ_TYPE_EDGE_FALLING);
75 platform_device_register(&asix_device); 76 platform_device_register(&asix_device);
76} 77}
77#else 78#else
diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c
index 55b74a7a6151..a18d37b3c5e6 100644
--- a/arch/arm/mach-pxa/colibri-pxa320.c
+++ b/arch/arm/mach-pxa/colibri-pxa320.c
@@ -15,7 +15,7 @@
15#include <linux/kernel.h> 15#include <linux/kernel.h>
16#include <linux/platform_device.h> 16#include <linux/platform_device.h>
17#include <linux/gpio.h> 17#include <linux/gpio.h>
18#include <net/ax88796.h> 18#include <linux/interrupt.h>
19 19
20#include <asm/mach-types.h> 20#include <asm/mach-types.h>
21#include <asm/sizes.h> 21#include <asm/sizes.h>
@@ -38,8 +38,8 @@
38 * Asix AX88796 Ethernet 38 * Asix AX88796 Ethernet
39 */ 39 */
40static struct ax_plat_data colibri_asix_platdata = { 40static struct ax_plat_data colibri_asix_platdata = {
41 .flags = AXFLG_MAC_FROMDEV, 41 .flags = 0, /* defined later */
42 .wordlength = 2 42 .wordlength = 2,
43}; 43};
44 44
45static struct resource colibri_asix_resource[] = { 45static struct resource colibri_asix_resource[] = {
@@ -51,7 +51,7 @@ static struct resource colibri_asix_resource[] = {
51 [1] = { 51 [1] = {
52 .start = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO), 52 .start = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO),
53 .end = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO), 53 .end = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO),
54 .flags = IORESOURCE_IRQ 54 .flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
55 } 55 }
56}; 56};
57 57
@@ -72,8 +72,8 @@ static mfp_cfg_t colibri_pxa320_eth_pin_config[] __initdata = {
72 72
73static void __init colibri_pxa320_init_eth(void) 73static void __init colibri_pxa320_init_eth(void)
74{ 74{
75 colibri_pxa3xx_init_eth(&colibri_asix_platdata);
75 pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_eth_pin_config)); 76 pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_eth_pin_config));
76 set_irq_type(gpio_to_irq(COLIBRI_ETH_IRQ_GPIO), IRQ_TYPE_EDGE_FALLING);
77 platform_device_register(&asix_device); 77 platform_device_register(&asix_device);
78} 78}
79#else 79#else
diff --git a/arch/arm/mach-pxa/colibri-pxa3xx.c b/arch/arm/mach-pxa/colibri-pxa3xx.c
index 12d0afc54aa5..ea34e34f8cd8 100644
--- a/arch/arm/mach-pxa/colibri-pxa3xx.c
+++ b/arch/arm/mach-pxa/colibri-pxa3xx.c
@@ -14,6 +14,7 @@
14#include <linux/kernel.h> 14#include <linux/kernel.h>
15#include <linux/platform_device.h> 15#include <linux/platform_device.h>
16#include <linux/gpio.h> 16#include <linux/gpio.h>
17#include <linux/etherdevice.h>
17#include <asm/mach-types.h> 18#include <asm/mach-types.h>
18#include <mach/hardware.h> 19#include <mach/hardware.h>
19#include <asm/sizes.h> 20#include <asm/sizes.h>
@@ -28,6 +29,40 @@
28#include "generic.h" 29#include "generic.h"
29#include "devices.h" 30#include "devices.h"
30 31
32#if defined(CONFIG_AX88796)
33#define ETHER_ADDR_LEN 6
34static u8 ether_mac_addr[ETHER_ADDR_LEN];
35
36void __init colibri_pxa3xx_init_eth(struct ax_plat_data *plat_data)
37{
38 int i;
39 u64 serial = ((u64) system_serial_high << 32) | system_serial_low;
40
41 /*
42 * If the bootloader passed in a serial boot tag, which contains a
43 * valid ethernet MAC, pass it to the interface. Toradex ships the
44 * modules with their own bootloader which provides a valid MAC
45 * this way.
46 */
47
48 for (i = 0; i < ETHER_ADDR_LEN; i++) {
49 ether_mac_addr[i] = serial & 0xff;
50 serial >>= 8;
51 }
52
53 if (is_valid_ether_addr(ether_mac_addr)) {
54 plat_data->flags |= AXFLG_MAC_FROMPLATFORM;
55 plat_data->mac_addr = ether_mac_addr;
56 printk(KERN_INFO "%s(): taking MAC from serial boot tag\n",
57 __func__);
58 } else {
59 plat_data->flags |= AXFLG_MAC_FROMDEV;
60 printk(KERN_INFO "%s(): no valid serial boot tag found, "
61 "taking MAC from device\n", __func__);
62 }
63}
64#endif
65
31#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE) 66#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
32static int mmc_detect_pin; 67static int mmc_detect_pin;
33 68
diff --git a/arch/arm/mach-pxa/csb701.c b/arch/arm/mach-pxa/csb701.c
index 4a2a2952c374..5a221a49ea4d 100644
--- a/arch/arm/mach-pxa/csb701.c
+++ b/arch/arm/mach-pxa/csb701.c
@@ -5,6 +5,8 @@
5#include <linux/input.h> 5#include <linux/input.h>
6#include <linux/leds.h> 6#include <linux/leds.h>
7 7
8#include <asm/mach-types.h>
9
8static struct gpio_keys_button csb701_buttons[] = { 10static struct gpio_keys_button csb701_buttons[] = {
9 { 11 {
10 .code = 0x7, 12 .code = 0x7,
@@ -54,6 +56,9 @@ static struct platform_device *devices[] __initdata = {
54 56
55static int __init csb701_init(void) 57static int __init csb701_init(void)
56{ 58{
59 if (!machine_is_csb726())
60 return -ENODEV;
61
57 return platform_add_devices(devices, ARRAY_SIZE(devices)); 62 return platform_add_devices(devices, ARRAY_SIZE(devices));
58} 63}
59 64
diff --git a/arch/arm/mach-pxa/e740.c b/arch/arm/mach-pxa/e740.c
index 07500a04fd8c..a36fc17f671d 100644
--- a/arch/arm/mach-pxa/e740.c
+++ b/arch/arm/mach-pxa/e740.c
@@ -29,6 +29,7 @@
29#include <mach/udc.h> 29#include <mach/udc.h>
30#include <mach/irda.h> 30#include <mach/irda.h>
31#include <mach/irqs.h> 31#include <mach/irqs.h>
32#include <mach/audio.h>
32 33
33#include "generic.h" 34#include "generic.h"
34#include "eseries.h" 35#include "eseries.h"
@@ -197,6 +198,7 @@ static void __init e740_init(void)
197 eseries_get_tmio_gpios(); 198 eseries_get_tmio_gpios();
198 platform_add_devices(devices, ARRAY_SIZE(devices)); 199 platform_add_devices(devices, ARRAY_SIZE(devices));
199 pxa_set_udc_info(&e7xx_udc_mach_info); 200 pxa_set_udc_info(&e7xx_udc_mach_info);
201 pxa_set_ac97_info(NULL);
200 e7xx_irda_init(); 202 e7xx_irda_init();
201 pxa_set_ficp_info(&e7xx_ficp_platform_data); 203 pxa_set_ficp_info(&e7xx_ficp_platform_data);
202} 204}
diff --git a/arch/arm/mach-pxa/e750.c b/arch/arm/mach-pxa/e750.c
index 6126c04e02bc..1d00110590e5 100644
--- a/arch/arm/mach-pxa/e750.c
+++ b/arch/arm/mach-pxa/e750.c
@@ -28,6 +28,7 @@
28#include <mach/udc.h> 28#include <mach/udc.h>
29#include <mach/irda.h> 29#include <mach/irda.h>
30#include <mach/irqs.h> 30#include <mach/irqs.h>
31#include <mach/audio.h>
31 32
32#include "generic.h" 33#include "generic.h"
33#include "eseries.h" 34#include "eseries.h"
@@ -198,6 +199,7 @@ static void __init e750_init(void)
198 eseries_get_tmio_gpios(); 199 eseries_get_tmio_gpios();
199 platform_add_devices(devices, ARRAY_SIZE(devices)); 200 platform_add_devices(devices, ARRAY_SIZE(devices));
200 pxa_set_udc_info(&e7xx_udc_mach_info); 201 pxa_set_udc_info(&e7xx_udc_mach_info);
202 pxa_set_ac97_info(NULL);
201 e7xx_irda_init(); 203 e7xx_irda_init();
202 pxa_set_ficp_info(&e7xx_ficp_platform_data); 204 pxa_set_ficp_info(&e7xx_ficp_platform_data);
203} 205}
diff --git a/arch/arm/mach-pxa/e800.c b/arch/arm/mach-pxa/e800.c
index 74ab09812a72..9866c7b9e784 100644
--- a/arch/arm/mach-pxa/e800.c
+++ b/arch/arm/mach-pxa/e800.c
@@ -27,6 +27,7 @@
27#include <mach/eseries-gpio.h> 27#include <mach/eseries-gpio.h>
28#include <mach/udc.h> 28#include <mach/udc.h>
29#include <mach/irqs.h> 29#include <mach/irqs.h>
30#include <mach/audio.h>
30 31
31#include "generic.h" 32#include "generic.h"
32#include "eseries.h" 33#include "eseries.h"
@@ -199,6 +200,7 @@ static void __init e800_init(void)
199 eseries_get_tmio_gpios(); 200 eseries_get_tmio_gpios();
200 platform_add_devices(devices, ARRAY_SIZE(devices)); 201 platform_add_devices(devices, ARRAY_SIZE(devices));
201 pxa_set_udc_info(&e800_udc_mach_info); 202 pxa_set_udc_info(&e800_udc_mach_info);
203 pxa_set_ac97_info(NULL);
202} 204}
203 205
204MACHINE_START(E800, "Toshiba e800") 206MACHINE_START(E800, "Toshiba e800")
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 920dfb8d36da..67611dadb44e 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -25,8 +25,10 @@
25#include <linux/regulator/machine.h> 25#include <linux/regulator/machine.h>
26#include <linux/spi/spi.h> 26#include <linux/spi/spi.h>
27#include <linux/spi/tdo24m.h> 27#include <linux/spi/tdo24m.h>
28#include <linux/spi/libertas_spi.h>
28#include <linux/power_supply.h> 29#include <linux/power_supply.h>
29#include <linux/apm-emulation.h> 30#include <linux/apm-emulation.h>
31#include <linux/delay.h>
30 32
31#include <media/soc_camera.h> 33#include <media/soc_camera.h>
32 34
@@ -62,6 +64,8 @@
62#define GPIO93_CAM_RESET (93) 64#define GPIO93_CAM_RESET (93)
63#define GPIO41_ETHIRQ (41) 65#define GPIO41_ETHIRQ (41)
64#define EM_X270_ETHIRQ IRQ_GPIO(GPIO41_ETHIRQ) 66#define EM_X270_ETHIRQ IRQ_GPIO(GPIO41_ETHIRQ)
67#define GPIO115_WLAN_PWEN (115)
68#define GPIO19_WLAN_STRAP (19)
65 69
66static int mmc_cd; 70static int mmc_cd;
67static int nand_rb; 71static int nand_rb;
@@ -159,8 +163,8 @@ static unsigned long common_pin_config[] = {
159 GPIO57_SSP1_TXD, 163 GPIO57_SSP1_TXD,
160 164
161 /* SSP2 */ 165 /* SSP2 */
162 GPIO19_SSP2_SCLK, 166 GPIO19_GPIO, /* SSP2 clock is used as GPIO for Libertas pin-strap */
163 GPIO14_SSP2_SFRM, 167 GPIO14_GPIO,
164 GPIO89_SSP2_TXD, 168 GPIO89_SSP2_TXD,
165 GPIO88_SSP2_RXD, 169 GPIO88_SSP2_RXD,
166 170
@@ -648,20 +652,86 @@ static struct tdo24m_platform_data em_x270_tdo24m_pdata = {
648 .model = TDO35S, 652 .model = TDO35S,
649}; 653};
650 654
655static struct pxa2xx_spi_master em_x270_spi_2_info = {
656 .num_chipselect = 1,
657 .enable_dma = 1,
658};
659
660static struct pxa2xx_spi_chip em_x270_libertas_chip = {
661 .rx_threshold = 1,
662 .tx_threshold = 1,
663 .timeout = 1000,
664};
665
666static unsigned long em_x270_libertas_pin_config[] = {
667 /* SSP2 */
668 GPIO19_SSP2_SCLK,
669 GPIO14_GPIO,
670 GPIO89_SSP2_TXD,
671 GPIO88_SSP2_RXD,
672};
673
674static int em_x270_libertas_setup(struct spi_device *spi)
675{
676 int err = gpio_request(GPIO115_WLAN_PWEN, "WLAN PWEN");
677 if (err)
678 return err;
679
680 gpio_direction_output(GPIO19_WLAN_STRAP, 1);
681 mdelay(100);
682
683 pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_libertas_pin_config));
684
685 gpio_direction_output(GPIO115_WLAN_PWEN, 0);
686 mdelay(100);
687 gpio_set_value(GPIO115_WLAN_PWEN, 1);
688 mdelay(100);
689
690 spi->bits_per_word = 16;
691 spi_setup(spi);
692
693 return 0;
694}
695
696static int em_x270_libertas_teardown(struct spi_device *spi)
697{
698 gpio_set_value(GPIO115_WLAN_PWEN, 0);
699 gpio_free(GPIO115_WLAN_PWEN);
700
701 return 0;
702}
703
704struct libertas_spi_platform_data em_x270_libertas_pdata = {
705 .use_dummy_writes = 1,
706 .gpio_cs = 14,
707 .setup = em_x270_libertas_setup,
708 .teardown = em_x270_libertas_teardown,
709};
710
651static struct spi_board_info em_x270_spi_devices[] __initdata = { 711static struct spi_board_info em_x270_spi_devices[] __initdata = {
652 { 712 {
653 .modalias = "tdo24m", 713 .modalias = "tdo24m",
654 .max_speed_hz = 1000000, 714 .max_speed_hz = 1000000,
655 .bus_num = 1, 715 .bus_num = 1,
656 .chip_select = 0, 716 .chip_select = 0,
657 .controller_data = &em_x270_tdo24m_chip, 717 .controller_data = &em_x270_tdo24m_chip,
658 .platform_data = &em_x270_tdo24m_pdata, 718 .platform_data = &em_x270_tdo24m_pdata,
719 },
720 {
721 .modalias = "libertas_spi",
722 .max_speed_hz = 13000000,
723 .bus_num = 2,
724 .irq = IRQ_GPIO(116),
725 .chip_select = 0,
726 .controller_data = &em_x270_libertas_chip,
727 .platform_data = &em_x270_libertas_pdata,
659 }, 728 },
660}; 729};
661 730
662static void __init em_x270_init_spi(void) 731static void __init em_x270_init_spi(void)
663{ 732{
664 pxa2xx_set_spi_info(1, &em_x270_spi_info); 733 pxa2xx_set_spi_info(1, &em_x270_spi_info);
734 pxa2xx_set_spi_info(2, &em_x270_spi_2_info);
665 spi_register_board_info(ARRAY_AND_SIZE(em_x270_spi_devices)); 735 spi_register_board_info(ARRAY_AND_SIZE(em_x270_spi_devices));
666} 736}
667#else 737#else
diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h
index 3f2a01d6a03c..90230c6f9925 100644
--- a/arch/arm/mach-pxa/include/mach/colibri.h
+++ b/arch/arm/mach-pxa/include/mach/colibri.h
@@ -1,5 +1,8 @@
1#ifndef _COLIBRI_H_ 1#ifndef _COLIBRI_H_
2#define _COLIBRI_H_ 2#define _COLIBRI_H_
3
4#include <net/ax88796.h>
5
3/* 6/*
4 * common settings for all modules 7 * common settings for all modules
5 */ 8 */
@@ -16,6 +19,10 @@ extern void colibri_pxa3xx_init_lcd(int bl_pin);
16static inline void colibri_pxa3xx_init_lcd(int) {} 19static inline void colibri_pxa3xx_init_lcd(int) {}
17#endif 20#endif
18 21
22#if defined(CONFIG_AX88796)
23extern void colibri_pxa3xx_init_eth(struct ax_plat_data *plat_data);
24#endif
25
19/* physical memory regions */ 26/* physical memory regions */
20#define COLIBRI_SDRAM_BASE 0xa0000000 /* SDRAM region */ 27#define COLIBRI_SDRAM_BASE 0xa0000000 /* SDRAM region */
21 28
diff --git a/arch/arm/mach-pxa/include/mach/magician.h b/arch/arm/mach-pxa/include/mach/magician.h
index 82a399f3f9f2..20ef37d4a9a7 100644
--- a/arch/arm/mach-pxa/include/mach/magician.h
+++ b/arch/arm/mach-pxa/include/mach/magician.h
@@ -27,7 +27,7 @@
27#define GPIO22_MAGICIAN_VIBRA_EN 22 27#define GPIO22_MAGICIAN_VIBRA_EN 22
28#define GPIO26_MAGICIAN_GSM_POWER 26 28#define GPIO26_MAGICIAN_GSM_POWER 26
29#define GPIO27_MAGICIAN_USBC_PUEN 27 29#define GPIO27_MAGICIAN_USBC_PUEN 27
30#define GPIO30_MAGICIAN_nCHARGE_EN 30 30#define GPIO30_MAGICIAN_BQ24022_nCHARGE_EN 30
31#define GPIO37_MAGICIAN_KEY_HANGUP 37 31#define GPIO37_MAGICIAN_KEY_HANGUP 37
32#define GPIO38_MAGICIAN_KEY_CONTACTS 38 32#define GPIO38_MAGICIAN_KEY_CONTACTS 38
33#define GPIO40_MAGICIAN_GSM_OUT2 40 33#define GPIO40_MAGICIAN_GSM_OUT2 40
@@ -98,7 +98,7 @@
98#define EGPIO_MAGICIAN_UNKNOWN_WAVEDEV_DLL MAGICIAN_EGPIO(2, 2) 98#define EGPIO_MAGICIAN_UNKNOWN_WAVEDEV_DLL MAGICIAN_EGPIO(2, 2)
99#define EGPIO_MAGICIAN_FLASH_VPP MAGICIAN_EGPIO(2, 3) 99#define EGPIO_MAGICIAN_FLASH_VPP MAGICIAN_EGPIO(2, 3)
100#define EGPIO_MAGICIAN_BL_POWER2 MAGICIAN_EGPIO(2, 4) 100#define EGPIO_MAGICIAN_BL_POWER2 MAGICIAN_EGPIO(2, 4)
101#define EGPIO_MAGICIAN_CHARGE_EN MAGICIAN_EGPIO(2, 5) 101#define EGPIO_MAGICIAN_BQ24022_ISET2 MAGICIAN_EGPIO(2, 5)
102#define EGPIO_MAGICIAN_GSM_POWER MAGICIAN_EGPIO(2, 7) 102#define EGPIO_MAGICIAN_GSM_POWER MAGICIAN_EGPIO(2, 7)
103 103
104/* input */ 104/* input */
diff --git a/arch/arm/mach-pxa/include/mach/palmld.h b/arch/arm/mach-pxa/include/mach/palmld.h
index 7c295a48d784..fb13c82ad6dc 100644
--- a/arch/arm/mach-pxa/include/mach/palmld.h
+++ b/arch/arm/mach-pxa/include/mach/palmld.h
@@ -87,6 +87,7 @@
87#define PALMLD_IDE_SIZE 0x00100000 87#define PALMLD_IDE_SIZE 0x00100000
88 88
89#define PALMLD_PHYS_IO_START 0x40000000 89#define PALMLD_PHYS_IO_START 0x40000000
90#define PALMLD_STR_BASE 0xa0200000
90 91
91/* BATTERY */ 92/* BATTERY */
92#define PALMLD_BAT_MAX_VOLTAGE 4000 /* 4.00V maximum voltage */ 93#define PALMLD_BAT_MAX_VOLTAGE 4000 /* 4.00V maximum voltage */
diff --git a/arch/arm/mach-pxa/include/mach/palmt5.h b/arch/arm/mach-pxa/include/mach/palmt5.h
index 94db2881f048..052bfe788ada 100644
--- a/arch/arm/mach-pxa/include/mach/palmt5.h
+++ b/arch/arm/mach-pxa/include/mach/palmt5.h
@@ -59,6 +59,7 @@
59/* Various addresses */ 59/* Various addresses */
60#define PALMT5_PHYS_RAM_START 0xa0000000 60#define PALMT5_PHYS_RAM_START 0xa0000000
61#define PALMT5_PHYS_IO_START 0x40000000 61#define PALMT5_PHYS_IO_START 0x40000000
62#define PALMT5_STR_BASE 0xa0200000
62 63
63/* TOUCHSCREEN */ 64/* TOUCHSCREEN */
64#define AC97_LINK_FRAME 21 65#define AC97_LINK_FRAME 21
diff --git a/arch/arm/mach-pxa/include/mach/palmte2.h b/arch/arm/mach-pxa/include/mach/palmte2.h
new file mode 100644
index 000000000000..12361341f9d8
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/palmte2.h
@@ -0,0 +1,68 @@
1/*
2 * GPIOs and interrupts for Palm Tungsten|E2 Handheld Computer
3 *
4 * Author:
5 * Carlos Eduardo Medaglia Dyonisio <cadu@nerdfeliz.com>
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
10 *
11 */
12
13#ifndef _INCLUDE_PALMTE2_H_
14#define _INCLUDE_PALMTE2_H_
15
16/** HERE ARE GPIOs **/
17
18/* GPIOs */
19#define GPIO_NR_PALMTE2_POWER_DETECT 9
20#define GPIO_NR_PALMTE2_HOTSYNC_BUTTON_N 4
21#define GPIO_NR_PALMTE2_EARPHONE_DETECT 15
22
23/* SD/MMC */
24#define GPIO_NR_PALMTE2_SD_DETECT_N 10
25#define GPIO_NR_PALMTE2_SD_POWER 55
26#define GPIO_NR_PALMTE2_SD_READONLY 51
27
28/* IRDA - disable GPIO connected to SD pin of tranceiver (TFBS4710?) ? */
29#define GPIO_NR_PALMTE2_IR_DISABLE 48
30
31/* USB */
32#define GPIO_NR_PALMTE2_USB_DETECT_N 35
33#define GPIO_NR_PALMTE2_USB_PULLUP 53
34
35/* LCD/BACKLIGHT */
36#define GPIO_NR_PALMTE2_BL_POWER 56
37#define GPIO_NR_PALMTE2_LCD_POWER 37
38
39/* KEYS */
40#define GPIO_NR_PALMTE2_KEY_NOTES 5
41#define GPIO_NR_PALMTE2_KEY_TASKS 7
42#define GPIO_NR_PALMTE2_KEY_CALENDAR 11
43#define GPIO_NR_PALMTE2_KEY_CONTACTS 13
44#define GPIO_NR_PALMTE2_KEY_CENTER 14
45#define GPIO_NR_PALMTE2_KEY_LEFT 19
46#define GPIO_NR_PALMTE2_KEY_RIGHT 20
47#define GPIO_NR_PALMTE2_KEY_DOWN 21
48#define GPIO_NR_PALMTE2_KEY_UP 22
49
50/** HERE ARE INIT VALUES **/
51
52/* BACKLIGHT */
53#define PALMTE2_MAX_INTENSITY 0xFE
54#define PALMTE2_DEFAULT_INTENSITY 0x7E
55#define PALMTE2_LIMIT_MASK 0x7F
56#define PALMTE2_PRESCALER 0x3F
57#define PALMTE2_PERIOD_NS 3500
58
59/* BATTERY */
60#define PALMTE2_BAT_MAX_VOLTAGE 4000 /* 4.00v current voltage */
61#define PALMTE2_BAT_MIN_VOLTAGE 3550 /* 3.55v critical voltage */
62#define PALMTE2_BAT_MAX_CURRENT 0 /* unknokn */
63#define PALMTE2_BAT_MIN_CURRENT 0 /* unknown */
64#define PALMTE2_BAT_MAX_CHARGE 1 /* unknown */
65#define PALMTE2_BAT_MIN_CHARGE 1 /* unknown */
66#define PALMTE2_MAX_LIFE_MINS 360 /* on-life in minutes */
67
68#endif
diff --git a/arch/arm/mach-pxa/include/mach/palmtx.h b/arch/arm/mach-pxa/include/mach/palmtx.h
index 1e8bccbda510..9f7d62fb4cbb 100644
--- a/arch/arm/mach-pxa/include/mach/palmtx.h
+++ b/arch/arm/mach-pxa/include/mach/palmtx.h
@@ -78,6 +78,8 @@
78#define PALMTX_PHYS_RAM_START 0xa0000000 78#define PALMTX_PHYS_RAM_START 0xa0000000
79#define PALMTX_PHYS_IO_START 0x40000000 79#define PALMTX_PHYS_IO_START 0x40000000
80 80
81#define PALMTX_STR_BASE 0xa0200000
82
81#define PALMTX_PHYS_FLASH_START PXA_CS0_PHYS /* ChipSelect 0 */ 83#define PALMTX_PHYS_FLASH_START PXA_CS0_PHYS /* ChipSelect 0 */
82#define PALMTX_PHYS_NAND_START PXA_CS1_PHYS /* ChipSelect 1 */ 84#define PALMTX_PHYS_NAND_START PXA_CS1_PHYS /* ChipSelect 1 */
83 85
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index deeea1c2782b..c899bbd94dc0 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -25,6 +25,8 @@
25#include <linux/mtd/physmap.h> 25#include <linux/mtd/physmap.h>
26#include <linux/pda_power.h> 26#include <linux/pda_power.h>
27#include <linux/pwm_backlight.h> 27#include <linux/pwm_backlight.h>
28#include <linux/regulator/bq24022.h>
29#include <linux/regulator/machine.h>
28#include <linux/usb/gpio_vbus.h> 30#include <linux/usb/gpio_vbus.h>
29 31
30#include <mach/hardware.h> 32#include <mach/hardware.h>
@@ -552,33 +554,7 @@ static struct platform_device gpio_vbus = {
552 554
553static int power_supply_init(struct device *dev) 555static int power_supply_init(struct device *dev)
554{ 556{
555 int ret; 557 return gpio_request(EGPIO_MAGICIAN_CABLE_STATE_AC, "CABLE_STATE_AC");
556
557 ret = gpio_request(EGPIO_MAGICIAN_CABLE_STATE_AC, "CABLE_STATE_AC");
558 if (ret)
559 goto err_cs_ac;
560 ret = gpio_request(EGPIO_MAGICIAN_CABLE_STATE_USB, "CABLE_STATE_USB");
561 if (ret)
562 goto err_cs_usb;
563 ret = gpio_request(EGPIO_MAGICIAN_CHARGE_EN, "CHARGE_EN");
564 if (ret)
565 goto err_chg_en;
566 ret = gpio_request(GPIO30_MAGICIAN_nCHARGE_EN, "nCHARGE_EN");
567 if (!ret)
568 ret = gpio_direction_output(GPIO30_MAGICIAN_nCHARGE_EN, 0);
569 if (ret)
570 goto err_nchg_en;
571
572 return 0;
573
574err_nchg_en:
575 gpio_free(EGPIO_MAGICIAN_CHARGE_EN);
576err_chg_en:
577 gpio_free(EGPIO_MAGICIAN_CABLE_STATE_USB);
578err_cs_usb:
579 gpio_free(EGPIO_MAGICIAN_CABLE_STATE_AC);
580err_cs_ac:
581 return ret;
582} 558}
583 559
584static int magician_is_ac_online(void) 560static int magician_is_ac_online(void)
@@ -586,22 +562,8 @@ static int magician_is_ac_online(void)
586 return gpio_get_value(EGPIO_MAGICIAN_CABLE_STATE_AC); 562 return gpio_get_value(EGPIO_MAGICIAN_CABLE_STATE_AC);
587} 563}
588 564
589static int magician_is_usb_online(void)
590{
591 return gpio_get_value(EGPIO_MAGICIAN_CABLE_STATE_USB);
592}
593
594static void magician_set_charge(int flags)
595{
596 gpio_set_value(GPIO30_MAGICIAN_nCHARGE_EN, !flags);
597 gpio_set_value(EGPIO_MAGICIAN_CHARGE_EN, flags);
598}
599
600static void power_supply_exit(struct device *dev) 565static void power_supply_exit(struct device *dev)
601{ 566{
602 gpio_free(GPIO30_MAGICIAN_nCHARGE_EN);
603 gpio_free(EGPIO_MAGICIAN_CHARGE_EN);
604 gpio_free(EGPIO_MAGICIAN_CABLE_STATE_USB);
605 gpio_free(EGPIO_MAGICIAN_CABLE_STATE_AC); 567 gpio_free(EGPIO_MAGICIAN_CABLE_STATE_AC);
606} 568}
607 569
@@ -612,8 +574,6 @@ static char *magician_supplicants[] = {
612static struct pda_power_pdata power_supply_info = { 574static struct pda_power_pdata power_supply_info = {
613 .init = power_supply_init, 575 .init = power_supply_init,
614 .is_ac_online = magician_is_ac_online, 576 .is_ac_online = magician_is_ac_online,
615 .is_usb_online = magician_is_usb_online,
616 .set_charge = magician_set_charge,
617 .exit = power_supply_exit, 577 .exit = power_supply_exit,
618 .supplied_to = magician_supplicants, 578 .supplied_to = magician_supplicants,
619 .num_supplicants = ARRAY_SIZE(magician_supplicants), 579 .num_supplicants = ARRAY_SIZE(magician_supplicants),
@@ -646,6 +606,43 @@ static struct platform_device power_supply = {
646 .num_resources = ARRAY_SIZE(power_supply_resources), 606 .num_resources = ARRAY_SIZE(power_supply_resources),
647}; 607};
648 608
609/*
610 * Battery charger
611 */
612
613static struct regulator_consumer_supply bq24022_consumers[] = {
614 {
615 .dev = &gpio_vbus.dev,
616 .supply = "vbus_draw",
617 },
618 {
619 .dev = &power_supply.dev,
620 .supply = "ac_draw",
621 },
622};
623
624static struct regulator_init_data bq24022_init_data = {
625 .constraints = {
626 .max_uA = 500000,
627 .valid_ops_mask = REGULATOR_CHANGE_CURRENT,
628 },
629 .num_consumer_supplies = ARRAY_SIZE(bq24022_consumers),
630 .consumer_supplies = bq24022_consumers,
631};
632
633static struct bq24022_mach_info bq24022_info = {
634 .gpio_nce = GPIO30_MAGICIAN_BQ24022_nCHARGE_EN,
635 .gpio_iset2 = EGPIO_MAGICIAN_BQ24022_ISET2,
636 .init_data = &bq24022_init_data,
637};
638
639static struct platform_device bq24022 = {
640 .name = "bq24022",
641 .id = -1,
642 .dev = {
643 .platform_data = &bq24022_info,
644 },
645};
649 646
650/* 647/*
651 * MMC/SD 648 * MMC/SD
@@ -756,6 +753,7 @@ static struct platform_device *devices[] __initdata = {
756 &egpio, 753 &egpio,
757 &backlight, 754 &backlight,
758 &pasic3, 755 &pasic3,
756 &bq24022,
759 &gpio_vbus, 757 &gpio_vbus,
760 &power_supply, 758 &power_supply,
761 &strataflash, 759 &strataflash,
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index 97c93a7a285c..9203b069b35c 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -50,6 +50,7 @@
50#include <mach/pxa27x-udc.h> 50#include <mach/pxa27x-udc.h>
51#include <mach/i2c.h> 51#include <mach/i2c.h>
52#include <mach/camera.h> 52#include <mach/camera.h>
53#include <mach/audio.h>
53#include <media/soc_camera.h> 54#include <media/soc_camera.h>
54 55
55#include <mach/mioa701.h> 56#include <mach/mioa701.h>
@@ -763,8 +764,6 @@ MIO_PARENT_DEV(mioa701_backlight, "pwm-backlight", &pxa27x_device_pwm0.dev,
763 &mioa701_backlight_data); 764 &mioa701_backlight_data);
764MIO_SIMPLE_DEV(mioa701_led, "leds-gpio", &gpio_led_info) 765MIO_SIMPLE_DEV(mioa701_led, "leds-gpio", &gpio_led_info)
765MIO_SIMPLE_DEV(pxa2xx_pcm, "pxa2xx-pcm", NULL) 766MIO_SIMPLE_DEV(pxa2xx_pcm, "pxa2xx-pcm", NULL)
766MIO_SIMPLE_DEV(pxa2xx_ac97, "pxa2xx-ac97", NULL)
767MIO_PARENT_DEV(mio_wm9713_codec, "wm9713-codec", &pxa2xx_ac97.dev, NULL)
768MIO_SIMPLE_DEV(mioa701_sound, "mioa701-wm9713", NULL) 767MIO_SIMPLE_DEV(mioa701_sound, "mioa701-wm9713", NULL)
769MIO_SIMPLE_DEV(mioa701_board, "mioa701-board", NULL) 768MIO_SIMPLE_DEV(mioa701_board, "mioa701-board", NULL)
770MIO_SIMPLE_DEV(gpio_vbus, "gpio-vbus", &gpio_vbus_data); 769MIO_SIMPLE_DEV(gpio_vbus, "gpio-vbus", &gpio_vbus_data);
@@ -774,8 +773,6 @@ static struct platform_device *devices[] __initdata = {
774 &mioa701_backlight, 773 &mioa701_backlight,
775 &mioa701_led, 774 &mioa701_led,
776 &pxa2xx_pcm, 775 &pxa2xx_pcm,
777 &pxa2xx_ac97,
778 &mio_wm9713_codec,
779 &mioa701_sound, 776 &mioa701_sound,
780 &power_dev, 777 &power_dev,
781 &strataflash, 778 &strataflash,
@@ -818,6 +815,7 @@ static void __init mioa701_machine_init(void)
818 pxa_set_keypad_info(&mioa701_keypad_info); 815 pxa_set_keypad_info(&mioa701_keypad_info);
819 wm97xx_bat_set_pdata(&mioa701_battery_data); 816 wm97xx_bat_set_pdata(&mioa701_battery_data);
820 pxa_set_udc_info(&mioa701_udc_info); 817 pxa_set_udc_info(&mioa701_udc_info);
818 pxa_set_ac97_info(NULL);
821 pm_power_off = mioa701_poweroff; 819 pm_power_off = mioa701_poweroff;
822 arm_pm_restart = mioa701_restart; 820 arm_pm_restart = mioa701_restart;
823 platform_add_devices(devices, ARRAY_SIZE(devices)); 821 platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index 8587477a9bb7..ecf5910e39d7 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -24,6 +24,7 @@
24#include <linux/gpio.h> 24#include <linux/gpio.h>
25#include <linux/wm97xx_batt.h> 25#include <linux/wm97xx_batt.h>
26#include <linux/power_supply.h> 26#include <linux/power_supply.h>
27#include <linux/sysdev.h>
27 28
28#include <asm/mach-types.h> 29#include <asm/mach-types.h>
29#include <asm/mach/arch.h> 30#include <asm/mach/arch.h>
@@ -68,10 +69,10 @@ static unsigned long palmld_pin_config[] __initdata = {
68 GPIO47_FICP_TXD, 69 GPIO47_FICP_TXD,
69 70
70 /* MATRIX KEYPAD */ 71 /* MATRIX KEYPAD */
71 GPIO100_KP_MKIN_0, 72 GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
72 GPIO101_KP_MKIN_1, 73 GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
73 GPIO102_KP_MKIN_2, 74 GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
74 GPIO97_KP_MKIN_3, 75 GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
75 GPIO103_KP_MKOUT_0, 76 GPIO103_KP_MKOUT_0,
76 GPIO104_KP_MKOUT_1, 77 GPIO104_KP_MKOUT_1,
77 GPIO105_KP_MKOUT_2, 78 GPIO105_KP_MKOUT_2,
@@ -507,6 +508,33 @@ static struct pxafb_mach_info palmld_lcd_screen = {
507}; 508};
508 509
509/****************************************************************************** 510/******************************************************************************
511 * Power management - standby
512 ******************************************************************************/
513#ifdef CONFIG_PM
514static u32 *addr __initdata;
515static u32 resume[3] __initdata = {
516 0xe3a00101, /* mov r0, #0x40000000 */
517 0xe380060f, /* orr r0, r0, #0x00f00000 */
518 0xe590f008, /* ldr pc, [r0, #0x08] */
519};
520
521static int __init palmld_pm_init(void)
522{
523 int i;
524
525 /* this is where the bootloader jumps */
526 addr = phys_to_virt(PALMLD_STR_BASE);
527
528 for (i = 0; i < 3; i++)
529 addr[i] = resume[i];
530
531 return 0;
532}
533
534device_initcall(palmld_pm_init);
535#endif
536
537/******************************************************************************
510 * Machine init 538 * Machine init
511 ******************************************************************************/ 539 ******************************************************************************/
512static struct platform_device *devices[] __initdata = { 540static struct platform_device *devices[] __initdata = {
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index 9521c7b33492..0680f1a575a3 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -75,10 +75,10 @@ static unsigned long palmt5_pin_config[] __initdata = {
75 GPIO95_GPIO, /* usb power */ 75 GPIO95_GPIO, /* usb power */
76 76
77 /* MATRIX KEYPAD */ 77 /* MATRIX KEYPAD */
78 GPIO100_KP_MKIN_0, 78 GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
79 GPIO101_KP_MKIN_1, 79 GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
80 GPIO102_KP_MKIN_2, 80 GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
81 GPIO97_KP_MKIN_3, 81 GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
82 GPIO103_KP_MKOUT_0, 82 GPIO103_KP_MKOUT_0,
83 GPIO104_KP_MKOUT_1, 83 GPIO104_KP_MKOUT_1,
84 GPIO105_KP_MKOUT_2, 84 GPIO105_KP_MKOUT_2,
@@ -450,6 +450,33 @@ static struct pxafb_mach_info palmt5_lcd_screen = {
450}; 450};
451 451
452/****************************************************************************** 452/******************************************************************************
453 * Power management - standby
454 ******************************************************************************/
455#ifdef CONFIG_PM
456static u32 *addr __initdata;
457static u32 resume[3] __initdata = {
458 0xe3a00101, /* mov r0, #0x40000000 */
459 0xe380060f, /* orr r0, r0, #0x00f00000 */
460 0xe590f008, /* ldr pc, [r0, #0x08] */
461};
462
463static int __init palmt5_pm_init(void)
464{
465 int i;
466
467 /* this is where the bootloader jumps */
468 addr = phys_to_virt(PALMT5_STR_BASE);
469
470 for (i = 0; i < 3; i++)
471 addr[i] = resume[i];
472
473 return 0;
474}
475
476device_initcall(palmt5_pm_init);
477#endif
478
479/******************************************************************************
453 * Machine init 480 * Machine init
454 ******************************************************************************/ 481 ******************************************************************************/
455static struct platform_device *devices[] __initdata = { 482static struct platform_device *devices[] __initdata = {
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
new file mode 100644
index 000000000000..43fcf2e86887
--- /dev/null
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -0,0 +1,466 @@
1/*
2 * Hardware definitions for Palm Tungsten|E2
3 *
4 * Author:
5 * Carlos Eduardo Medaglia Dyonisio <cadu@nerdfeliz.com>
6 *
7 * Rewrite for mainline:
8 * Marek Vasut <marek.vasut@gmail.com>
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
13 *
14 * (find more info at www.hackndev.com)
15 *
16 */
17
18#include <linux/platform_device.h>
19#include <linux/delay.h>
20#include <linux/irq.h>
21#include <linux/gpio_keys.h>
22#include <linux/input.h>
23#include <linux/pda_power.h>
24#include <linux/pwm_backlight.h>
25#include <linux/gpio.h>
26#include <linux/wm97xx_batt.h>
27#include <linux/power_supply.h>
28
29#include <asm/mach-types.h>
30#include <asm/mach/arch.h>
31#include <asm/mach/map.h>
32
33#include <mach/audio.h>
34#include <mach/palmte2.h>
35#include <mach/mmc.h>
36#include <mach/pxafb.h>
37#include <mach/mfp-pxa25x.h>
38#include <mach/irda.h>
39#include <mach/udc.h>
40
41#include "generic.h"
42#include "devices.h"
43
44/******************************************************************************
45 * Pin configuration
46 ******************************************************************************/
47static unsigned long palmte2_pin_config[] __initdata = {
48 /* MMC */
49 GPIO6_MMC_CLK,
50 GPIO8_MMC_CS0,
51 GPIO10_GPIO, /* SD detect */
52 GPIO55_GPIO, /* SD power */
53 GPIO51_GPIO, /* SD r/o switch */
54
55 /* AC97 */
56 GPIO28_AC97_BITCLK,
57 GPIO29_AC97_SDATA_IN_0,
58 GPIO30_AC97_SDATA_OUT,
59 GPIO31_AC97_SYNC,
60
61 /* PWM */
62 GPIO16_PWM0_OUT,
63
64 /* USB */
65 GPIO15_GPIO, /* usb detect */
66 GPIO53_GPIO, /* usb power */
67
68 /* IrDA */
69 GPIO48_GPIO, /* ir disable */
70 GPIO46_FICP_RXD,
71 GPIO47_FICP_TXD,
72
73 /* LCD */
74 GPIO58_LCD_LDD_0,
75 GPIO59_LCD_LDD_1,
76 GPIO60_LCD_LDD_2,
77 GPIO61_LCD_LDD_3,
78 GPIO62_LCD_LDD_4,
79 GPIO63_LCD_LDD_5,
80 GPIO64_LCD_LDD_6,
81 GPIO65_LCD_LDD_7,
82 GPIO66_LCD_LDD_8,
83 GPIO67_LCD_LDD_9,
84 GPIO68_LCD_LDD_10,
85 GPIO69_LCD_LDD_11,
86 GPIO70_LCD_LDD_12,
87 GPIO71_LCD_LDD_13,
88 GPIO72_LCD_LDD_14,
89 GPIO73_LCD_LDD_15,
90 GPIO74_LCD_FCLK,
91 GPIO75_LCD_LCLK,
92 GPIO76_LCD_PCLK,
93 GPIO77_LCD_BIAS,
94
95 /* GPIO KEYS */
96 GPIO5_GPIO, /* notes */
97 GPIO7_GPIO, /* tasks */
98 GPIO11_GPIO, /* calendar */
99 GPIO13_GPIO, /* contacts */
100 GPIO14_GPIO, /* center */
101 GPIO19_GPIO, /* left */
102 GPIO20_GPIO, /* right */
103 GPIO21_GPIO, /* down */
104 GPIO22_GPIO, /* up */
105
106 /* MISC */
107 GPIO1_RST, /* reset */
108 GPIO4_GPIO, /* Hotsync button */
109 GPIO9_GPIO, /* power detect */
110 GPIO37_GPIO, /* LCD power */
111 GPIO56_GPIO, /* Backlight power */
112};
113
114/******************************************************************************
115 * SD/MMC card controller
116 ******************************************************************************/
117static int palmte2_mci_init(struct device *dev,
118 irq_handler_t palmte2_detect_int, void *data)
119{
120 int err = 0;
121
122 /* Setup an interrupt for detecting card insert/remove events */
123 err = gpio_request(GPIO_NR_PALMTE2_SD_DETECT_N, "SD IRQ");
124 if (err)
125 goto err;
126 err = gpio_direction_input(GPIO_NR_PALMTE2_SD_DETECT_N);
127 if (err)
128 goto err2;
129 err = request_irq(gpio_to_irq(GPIO_NR_PALMTE2_SD_DETECT_N),
130 palmte2_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
131 IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
132 "SD/MMC card detect", data);
133 if (err) {
134 printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
135 __func__);
136 goto err2;
137 }
138
139 err = gpio_request(GPIO_NR_PALMTE2_SD_POWER, "SD_POWER");
140 if (err)
141 goto err3;
142 err = gpio_direction_output(GPIO_NR_PALMTE2_SD_POWER, 0);
143 if (err)
144 goto err4;
145
146 err = gpio_request(GPIO_NR_PALMTE2_SD_READONLY, "SD_READONLY");
147 if (err)
148 goto err4;
149 err = gpio_direction_input(GPIO_NR_PALMTE2_SD_READONLY);
150 if (err)
151 goto err5;
152
153 printk(KERN_DEBUG "%s: irq registered\n", __func__);
154
155 return 0;
156
157err5:
158 gpio_free(GPIO_NR_PALMTE2_SD_READONLY);
159err4:
160 gpio_free(GPIO_NR_PALMTE2_SD_POWER);
161err3:
162 free_irq(gpio_to_irq(GPIO_NR_PALMTE2_SD_DETECT_N), data);
163err2:
164 gpio_free(GPIO_NR_PALMTE2_SD_DETECT_N);
165err:
166 return err;
167}
168
169static void palmte2_mci_exit(struct device *dev, void *data)
170{
171 gpio_free(GPIO_NR_PALMTE2_SD_READONLY);
172 gpio_free(GPIO_NR_PALMTE2_SD_POWER);
173 free_irq(gpio_to_irq(GPIO_NR_PALMTE2_SD_DETECT_N), data);
174 gpio_free(GPIO_NR_PALMTE2_SD_DETECT_N);
175}
176
177static void palmte2_mci_power(struct device *dev, unsigned int vdd)
178{
179 struct pxamci_platform_data *p_d = dev->platform_data;
180 gpio_set_value(GPIO_NR_PALMTE2_SD_POWER, p_d->ocr_mask & (1 << vdd));
181}
182
183static int palmte2_mci_get_ro(struct device *dev)
184{
185 return gpio_get_value(GPIO_NR_PALMTE2_SD_READONLY);
186}
187
188static struct pxamci_platform_data palmte2_mci_platform_data = {
189 .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
190 .setpower = palmte2_mci_power,
191 .get_ro = palmte2_mci_get_ro,
192 .init = palmte2_mci_init,
193 .exit = palmte2_mci_exit,
194};
195
196/******************************************************************************
197 * GPIO keys
198 ******************************************************************************/
199static struct gpio_keys_button palmte2_pxa_buttons[] = {
200 {KEY_F1, GPIO_NR_PALMTE2_KEY_CONTACTS, 1, "Contacts" },
201 {KEY_F2, GPIO_NR_PALMTE2_KEY_CALENDAR, 1, "Calendar" },
202 {KEY_F3, GPIO_NR_PALMTE2_KEY_TASKS, 1, "Tasks" },
203 {KEY_F4, GPIO_NR_PALMTE2_KEY_NOTES, 1, "Notes" },
204 {KEY_ENTER, GPIO_NR_PALMTE2_KEY_CENTER, 1, "Center" },
205 {KEY_LEFT, GPIO_NR_PALMTE2_KEY_LEFT, 1, "Left" },
206 {KEY_RIGHT, GPIO_NR_PALMTE2_KEY_RIGHT, 1, "Right" },
207 {KEY_DOWN, GPIO_NR_PALMTE2_KEY_DOWN, 1, "Down" },
208 {KEY_UP, GPIO_NR_PALMTE2_KEY_UP, 1, "Up" },
209};
210
211static struct gpio_keys_platform_data palmte2_pxa_keys_data = {
212 .buttons = palmte2_pxa_buttons,
213 .nbuttons = ARRAY_SIZE(palmte2_pxa_buttons),
214};
215
216static struct platform_device palmte2_pxa_keys = {
217 .name = "gpio-keys",
218 .id = -1,
219 .dev = {
220 .platform_data = &palmte2_pxa_keys_data,
221 },
222};
223
224/******************************************************************************
225 * Backlight
226 ******************************************************************************/
227static int palmte2_backlight_init(struct device *dev)
228{
229 int ret;
230
231 ret = gpio_request(GPIO_NR_PALMTE2_BL_POWER, "BL POWER");
232 if (ret)
233 goto err;
234 ret = gpio_direction_output(GPIO_NR_PALMTE2_BL_POWER, 0);
235 if (ret)
236 goto err2;
237 ret = gpio_request(GPIO_NR_PALMTE2_LCD_POWER, "LCD POWER");
238 if (ret)
239 goto err2;
240 ret = gpio_direction_output(GPIO_NR_PALMTE2_LCD_POWER, 0);
241 if (ret)
242 goto err3;
243
244 return 0;
245err3:
246 gpio_free(GPIO_NR_PALMTE2_LCD_POWER);
247err2:
248 gpio_free(GPIO_NR_PALMTE2_BL_POWER);
249err:
250 return ret;
251}
252
253static int palmte2_backlight_notify(int brightness)
254{
255 gpio_set_value(GPIO_NR_PALMTE2_BL_POWER, brightness);
256 gpio_set_value(GPIO_NR_PALMTE2_LCD_POWER, brightness);
257 return brightness;
258}
259
260static void palmte2_backlight_exit(struct device *dev)
261{
262 gpio_free(GPIO_NR_PALMTE2_BL_POWER);
263 gpio_free(GPIO_NR_PALMTE2_LCD_POWER);
264}
265
266static struct platform_pwm_backlight_data palmte2_backlight_data = {
267 .pwm_id = 0,
268 .max_brightness = PALMTE2_MAX_INTENSITY,
269 .dft_brightness = PALMTE2_MAX_INTENSITY,
270 .pwm_period_ns = PALMTE2_PERIOD_NS,
271 .init = palmte2_backlight_init,
272 .notify = palmte2_backlight_notify,
273 .exit = palmte2_backlight_exit,
274};
275
276static struct platform_device palmte2_backlight = {
277 .name = "pwm-backlight",
278 .dev = {
279 .parent = &pxa25x_device_pwm0.dev,
280 .platform_data = &palmte2_backlight_data,
281 },
282};
283
284/******************************************************************************
285 * IrDA
286 ******************************************************************************/
287static int palmte2_irda_startup(struct device *dev)
288{
289 int err;
290 err = gpio_request(GPIO_NR_PALMTE2_IR_DISABLE, "IR DISABLE");
291 if (err)
292 goto err;
293 err = gpio_direction_output(GPIO_NR_PALMTE2_IR_DISABLE, 1);
294 if (err)
295 gpio_free(GPIO_NR_PALMTE2_IR_DISABLE);
296err:
297 return err;
298}
299
300static void palmte2_irda_shutdown(struct device *dev)
301{
302 gpio_free(GPIO_NR_PALMTE2_IR_DISABLE);
303}
304
305static void palmte2_irda_transceiver_mode(struct device *dev, int mode)
306{
307 gpio_set_value(GPIO_NR_PALMTE2_IR_DISABLE, mode & IR_OFF);
308 pxa2xx_transceiver_mode(dev, mode);
309}
310
311static struct pxaficp_platform_data palmte2_ficp_platform_data = {
312 .startup = palmte2_irda_startup,
313 .shutdown = palmte2_irda_shutdown,
314 .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF,
315 .transceiver_mode = palmte2_irda_transceiver_mode,
316};
317
318/******************************************************************************
319 * UDC
320 ******************************************************************************/
321static struct pxa2xx_udc_mach_info palmte2_udc_info __initdata = {
322 .gpio_vbus = GPIO_NR_PALMTE2_USB_DETECT_N,
323 .gpio_vbus_inverted = 1,
324 .gpio_pullup = GPIO_NR_PALMTE2_USB_PULLUP,
325 .gpio_pullup_inverted = 0,
326};
327
328/******************************************************************************
329 * Power supply
330 ******************************************************************************/
331static int power_supply_init(struct device *dev)
332{
333 int ret;
334
335 ret = gpio_request(GPIO_NR_PALMTE2_POWER_DETECT, "CABLE_STATE_AC");
336 if (ret)
337 goto err1;
338 ret = gpio_direction_input(GPIO_NR_PALMTE2_POWER_DETECT);
339 if (ret)
340 goto err2;
341
342 return 0;
343
344err2:
345 gpio_free(GPIO_NR_PALMTE2_POWER_DETECT);
346err1:
347 return ret;
348}
349
350static int palmte2_is_ac_online(void)
351{
352 return gpio_get_value(GPIO_NR_PALMTE2_POWER_DETECT);
353}
354
355static void power_supply_exit(struct device *dev)
356{
357 gpio_free(GPIO_NR_PALMTE2_POWER_DETECT);
358}
359
360static char *palmte2_supplicants[] = {
361 "main-battery",
362};
363
364static struct pda_power_pdata power_supply_info = {
365 .init = power_supply_init,
366 .is_ac_online = palmte2_is_ac_online,
367 .exit = power_supply_exit,
368 .supplied_to = palmte2_supplicants,
369 .num_supplicants = ARRAY_SIZE(palmte2_supplicants),
370};
371
372static struct platform_device power_supply = {
373 .name = "pda-power",
374 .id = -1,
375 .dev = {
376 .platform_data = &power_supply_info,
377 },
378};
379
380/******************************************************************************
381 * WM97xx battery
382 ******************************************************************************/
383static struct wm97xx_batt_info wm97xx_batt_pdata = {
384 .batt_aux = WM97XX_AUX_ID3,
385 .temp_aux = WM97XX_AUX_ID2,
386 .charge_gpio = -1,
387 .max_voltage = PALMTE2_BAT_MAX_VOLTAGE,
388 .min_voltage = PALMTE2_BAT_MIN_VOLTAGE,
389 .batt_mult = 1000,
390 .batt_div = 414,
391 .temp_mult = 1,
392 .temp_div = 1,
393 .batt_tech = POWER_SUPPLY_TECHNOLOGY_LIPO,
394 .batt_name = "main-batt",
395};
396
397/******************************************************************************
398 * Framebuffer
399 ******************************************************************************/
400static struct pxafb_mode_info palmte2_lcd_modes[] = {
401{
402 .pixclock = 77757,
403 .xres = 320,
404 .yres = 320,
405 .bpp = 16,
406
407 .left_margin = 28,
408 .right_margin = 7,
409 .upper_margin = 7,
410 .lower_margin = 5,
411
412 .hsync_len = 4,
413 .vsync_len = 1,
414},
415};
416
417static struct pxafb_mach_info palmte2_lcd_screen = {
418 .modes = palmte2_lcd_modes,
419 .num_modes = ARRAY_SIZE(palmte2_lcd_modes),
420 .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
421};
422
423/******************************************************************************
424 * Machine init
425 ******************************************************************************/
426static struct platform_device *devices[] __initdata = {
427#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
428 &palmte2_pxa_keys,
429#endif
430 &palmte2_backlight,
431 &power_supply,
432};
433
434/* setup udc GPIOs initial state */
435static void __init palmte2_udc_init(void)
436{
437 if (!gpio_request(GPIO_NR_PALMTE2_USB_PULLUP, "UDC Vbus")) {
438 gpio_direction_output(GPIO_NR_PALMTE2_USB_PULLUP, 1);
439 gpio_free(GPIO_NR_PALMTE2_USB_PULLUP);
440 }
441}
442
443static void __init palmte2_init(void)
444{
445 pxa2xx_mfp_config(ARRAY_AND_SIZE(palmte2_pin_config));
446
447 set_pxa_fb_info(&palmte2_lcd_screen);
448 pxa_set_mci_info(&palmte2_mci_platform_data);
449 palmte2_udc_init();
450 pxa_set_udc_info(&palmte2_udc_info);
451 pxa_set_ac97_info(NULL);
452 pxa_set_ficp_info(&palmte2_ficp_platform_data);
453 wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
454
455 platform_add_devices(devices, ARRAY_SIZE(devices));
456}
457
458MACHINE_START(PALMTE2, "Palm Tungsten|E2")
459 .phys_io = 0x40000000,
460 .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
461 .boot_params = 0xa0000100,
462 .map_io = pxa_map_io,
463 .init_irq = pxa25x_init_irq,
464 .timer = &pxa_timer,
465 .init_machine = palmte2_init
466MACHINE_END
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index b490c0924619..59d0c1cba556 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -93,10 +93,10 @@ static unsigned long palmtx_pin_config[] __initdata = {
93 GPIO116_GPIO, /* wifi ready */ 93 GPIO116_GPIO, /* wifi ready */
94 94
95 /* MATRIX KEYPAD */ 95 /* MATRIX KEYPAD */
96 GPIO100_KP_MKIN_0, 96 GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
97 GPIO101_KP_MKIN_1, 97 GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
98 GPIO102_KP_MKIN_2, 98 GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
99 GPIO97_KP_MKIN_3, 99 GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
100 GPIO103_KP_MKOUT_0, 100 GPIO103_KP_MKOUT_0,
101 GPIO104_KP_MKOUT_1, 101 GPIO104_KP_MKOUT_1,
102 GPIO105_KP_MKOUT_2, 102 GPIO105_KP_MKOUT_2,
@@ -459,6 +459,33 @@ static struct pxafb_mach_info palmtx_lcd_screen = {
459}; 459};
460 460
461/****************************************************************************** 461/******************************************************************************
462 * Power management - standby
463 ******************************************************************************/
464#ifdef CONFIG_PM
465static u32 *addr __initdata;
466static u32 resume[3] __initdata = {
467 0xe3a00101, /* mov r0, #0x40000000 */
468 0xe380060f, /* orr r0, r0, #0x00f00000 */
469 0xe590f008, /* ldr pc, [r0, #0x08] */
470};
471
472static int __init palmtx_pm_init(void)
473{
474 int i;
475
476 /* this is where the bootloader jumps */
477 addr = phys_to_virt(PALMTX_STR_BASE);
478
479 for (i = 0; i < 3; i++)
480 addr[i] = resume[i];
481
482 return 0;
483}
484
485device_initcall(palmtx_pm_init);
486#endif
487
488/******************************************************************************
462 * Machine init 489 * Machine init
463 ******************************************************************************/ 490 ******************************************************************************/
464static struct platform_device *devices[] __initdata = { 491static struct platform_device *devices[] __initdata = {
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 6e8ade6ae339..afac5b6d3d78 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -45,6 +45,7 @@
45#include <mach/udc.h> 45#include <mach/udc.h>
46#include <mach/tosa_bt.h> 46#include <mach/tosa_bt.h>
47#include <mach/pxa2xx_spi.h> 47#include <mach/pxa2xx_spi.h>
48#include <mach/audio.h>
48 49
49#include <asm/mach/arch.h> 50#include <asm/mach/arch.h>
50#include <mach/tosa.h> 51#include <mach/tosa.h>
@@ -914,6 +915,7 @@ static void __init tosa_init(void)
914 pxa_set_udc_info(&udc_info); 915 pxa_set_udc_info(&udc_info);
915 pxa_set_ficp_info(&tosa_ficp_platform_data); 916 pxa_set_ficp_info(&tosa_ficp_platform_data);
916 pxa_set_i2c_info(NULL); 917 pxa_set_i2c_info(NULL);
918 pxa_set_ac97_info(NULL);
917 platform_scoop_config = &tosa_pcmcia_config; 919 platform_scoop_config = &tosa_pcmcia_config;
918 920
919 pxa2xx_set_spi_info(2, &pxa_ssp_master_info); 921 pxa2xx_set_spi_info(2, &pxa_ssp_master_info);
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index b438fc4fb77b..e6344ece00ce 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -828,6 +828,17 @@ void __init reserve_node_zero(pg_data_t *pgdat)
828 BOOTMEM_DEFAULT); 828 BOOTMEM_DEFAULT);
829 } 829 }
830 830
831 if (machine_is_palmld() || machine_is_palmtx()) {
832 reserve_bootmem_node(pgdat, 0xa0000000, 0x1000,
833 BOOTMEM_EXCLUSIVE);
834 reserve_bootmem_node(pgdat, 0xa0200000, 0x1000,
835 BOOTMEM_EXCLUSIVE);
836 }
837
838 if (machine_is_palmt5())
839 reserve_bootmem_node(pgdat, 0xa0200000, 0x1000,
840 BOOTMEM_EXCLUSIVE);
841
831#ifdef CONFIG_SA1111 842#ifdef CONFIG_SA1111
832 /* 843 /*
833 * Because of the SA1111 DMA bug, we want to preserve our 844 * Because of the SA1111 DMA bug, we want to preserve our
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index 4ed228a89943..bb5e6f671578 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -280,7 +280,7 @@ static int ohci_hcd_at91_drv_probe(struct platform_device *pdev)
280 * are always powered while this driver is active, and use 280 * are always powered while this driver is active, and use
281 * active-low power switches. 281 * active-low power switches.
282 */ 282 */
283 for (i = 0; i < pdata->ports; i++) { 283 for (i = 0; i < ARRAY_SIZE(pdata->vbus_pin); i++) {
284 if (pdata->vbus_pin[i] <= 0) 284 if (pdata->vbus_pin[i] <= 0)
285 continue; 285 continue;
286 gpio_request(pdata->vbus_pin[i], "ohci_vbus"); 286 gpio_request(pdata->vbus_pin[i], "ohci_vbus");
@@ -298,7 +298,7 @@ static int ohci_hcd_at91_drv_remove(struct platform_device *pdev)
298 int i; 298 int i;
299 299
300 if (pdata) { 300 if (pdata) {
301 for (i = 0; i < pdata->ports; i++) { 301 for (i = 0; i < ARRAY_SIZE(pdata->vbus_pin); i++) {
302 if (pdata->vbus_pin[i] <= 0) 302 if (pdata->vbus_pin[i] <= 0)
303 continue; 303 continue;
304 gpio_direction_output(pdata->vbus_pin[i], 1); 304 gpio_direction_output(pdata->vbus_pin[i], 1);
generated by cgit v1.2.2 (git 2.25.0) at 2025-11-14 03:58:48 -0500