aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--arch/i386/kernel/apic.c1553
-rw-r--r--arch/i386/kernel/io_apic.c2
-rw-r--r--arch/i386/kernel/irq.c22
-rw-r--r--arch/i386/kernel/smpboot.c4
-rw-r--r--include/asm-i386/apic.h2
5 files changed, 816 insertions, 767 deletions
diff --git a/arch/i386/kernel/apic.c b/arch/i386/kernel/apic.c
index f4159e0a7ae9..b56448f214a7 100644
--- a/arch/i386/kernel/apic.c
+++ b/arch/i386/kernel/apic.c
@@ -45,6 +45,13 @@
45#include "io_ports.h" 45#include "io_ports.h"
46 46
47/* 47/*
48 * Sanity check
49 */
50#if (SPURIOUS_APIC_VECTOR & 0x0F) != 0x0F
51# error SPURIOUS_APIC_VECTOR definition error
52#endif
53
54/*
48 * cpu_mask that denotes the CPUs that needs timer interrupt coming in as 55 * cpu_mask that denotes the CPUs that needs timer interrupt coming in as
49 * IPIs in place of local APIC timers 56 * IPIs in place of local APIC timers
50 */ 57 */
@@ -52,121 +59,472 @@ static cpumask_t timer_bcast_ipi;
52 59
53/* 60/*
54 * Knob to control our willingness to enable the local APIC. 61 * Knob to control our willingness to enable the local APIC.
62 *
63 * -1=force-disable, +1=force-enable
55 */ 64 */
56static int enable_local_apic __initdata = 0; /* -1=force-disable, +1=force-enable */ 65static int enable_local_apic __initdata = 0;
66
67/*
68 * Debug level, exported for io_apic.c
69 */
70int apic_verbosity;
71
72static void apic_pm_activate(void);
57 73
58static inline void lapic_disable(void) 74
75/* Using APIC to generate smp_local_timer_interrupt? */
76int using_apic_timer __read_mostly = 0;
77
78/* Local APIC was disabled by the BIOS and enabled by the kernel */
79static int enabled_via_apicbase;
80
81/*
82 * Get the LAPIC version
83 */
84static inline int lapic_get_version(void)
59{ 85{
60 enable_local_apic = -1; 86 return GET_APIC_VERSION(apic_read(APIC_LVR));
61 clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability);
62} 87}
63 88
64static inline void lapic_enable(void) 89/*
90 * Check, if the APIC is integrated or a seperate chip
91 */
92static inline int lapic_is_integrated(void)
65{ 93{
66 enable_local_apic = 1; 94 return APIC_INTEGRATED(lapic_get_version());
67} 95}
68 96
69/* 97/*
70 * Debug level 98 * Check, whether this is a modern or a first generation APIC
71 */ 99 */
72int apic_verbosity;
73
74
75static void apic_pm_activate(void);
76
77static int modern_apic(void) 100static int modern_apic(void)
78{ 101{
79 unsigned int lvr, version;
80 /* AMD systems use old APIC versions, so check the CPU */ 102 /* AMD systems use old APIC versions, so check the CPU */
81 if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD && 103 if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD &&
82 boot_cpu_data.x86 >= 0xf) 104 boot_cpu_data.x86 >= 0xf)
83 return 1; 105 return 1;
84 lvr = apic_read(APIC_LVR); 106 return lapic_get_version() >= 0x14;
85 version = GET_APIC_VERSION(lvr); 107}
86 return version >= 0x14; 108
109/**
110 * enable_NMI_through_LVT0 - enable NMI through local vector table 0
111 */
112void enable_NMI_through_LVT0 (void * dummy)
113{
114 unsigned int v = APIC_DM_NMI;
115
116 /* Level triggered for 82489DX */
117 if (!lapic_is_integrated())
118 v |= APIC_LVT_LEVEL_TRIGGER;
119 apic_write_around(APIC_LVT0, v);
120}
121
122/**
123 * get_physical_broadcast - Get number of physical broadcast IDs
124 */
125int get_physical_broadcast(void)
126{
127 return modern_apic() ? 0xff : 0xf;
128}
129
130/**
131 * lapic_get_maxlvt - get the maximum number of local vector table entries
132 */
133int lapic_get_maxlvt(void)
134{
135 unsigned int v = apic_read(APIC_LVR);
136
137 /* 82489DXs do not report # of LVT entries. */
138 return APIC_INTEGRATED(GET_APIC_VERSION(v)) ? GET_APIC_MAXLVT(v) : 2;
87} 139}
88 140
89/* 141/*
90 * 'what should we do if we get a hw irq event on an illegal vector'. 142 * Local APIC timer
91 * each architecture has to answer this themselves. 143 */
144
145/*
146 * This part sets up the APIC 32 bit clock in LVTT1, with HZ interrupts
147 * per second. We assume that the caller has already set up the local
148 * APIC.
149 *
150 * The APIC timer is not exactly sync with the external timer chip, it
151 * closely follows bus clocks.
152 */
153
154/*
155 * The timer chip is already set up at HZ interrupts per second here,
156 * but we do not accept timer interrupts yet. We only allow the BP
157 * to calibrate.
92 */ 158 */
93void ack_bad_irq(unsigned int irq) 159static unsigned int __devinit get_8254_timer_count(void)
160{
161 unsigned long flags;
162
163 unsigned int count;
164
165 spin_lock_irqsave(&i8253_lock, flags);
166
167 outb_p(0x00, PIT_MODE);
168 count = inb_p(PIT_CH0);
169 count |= inb_p(PIT_CH0) << 8;
170
171 spin_unlock_irqrestore(&i8253_lock, flags);
172
173 return count;
174}
175
176/* next tick in 8254 can be caught by catching timer wraparound */
177static void __devinit wait_8254_wraparound(void)
94{ 178{
95 printk("unexpected IRQ trap at vector %02x\n", irq); 179 unsigned int curr_count, prev_count;
180
181 curr_count = get_8254_timer_count();
182 do {
183 prev_count = curr_count;
184 curr_count = get_8254_timer_count();
185
186 /* workaround for broken Mercury/Neptune */
187 if (prev_count >= curr_count + 0x100)
188 curr_count = get_8254_timer_count();
189
190 } while (prev_count >= curr_count);
191}
192
193/*
194 * Default initialization for 8254 timers. If we use other timers like HPET,
195 * we override this later
196 */
197void (*wait_timer_tick)(void) __devinitdata = wait_8254_wraparound;
198
199/*
200 * This function sets up the local APIC timer, with a timeout of
201 * 'clocks' APIC bus clock. During calibration we actually call
202 * this function twice on the boot CPU, once with a bogus timeout
203 * value, second time for real. The other (noncalibrating) CPUs
204 * call this function only once, with the real, calibrated value.
205 *
206 * We do reads before writes even if unnecessary, to get around the
207 * P5 APIC double write bug.
208 */
209
210#define APIC_DIVISOR 16
211
212static void __setup_APIC_LVTT(unsigned int clocks)
213{
214 unsigned int lvtt_value, tmp_value;
215 int cpu = smp_processor_id();
216
217 lvtt_value = APIC_LVT_TIMER_PERIODIC | LOCAL_TIMER_VECTOR;
218 if (!lapic_is_integrated())
219 lvtt_value |= SET_APIC_TIMER_BASE(APIC_TIMER_BASE_DIV);
220
221 if (cpu_isset(cpu, timer_bcast_ipi))
222 lvtt_value |= APIC_LVT_MASKED;
223
224 apic_write_around(APIC_LVTT, lvtt_value);
225
96 /* 226 /*
97 * Currently unexpected vectors happen only on SMP and APIC. 227 * Divide PICLK by 16
98 * We _must_ ack these because every local APIC has only N
99 * irq slots per priority level, and a 'hanging, unacked' IRQ
100 * holds up an irq slot - in excessive cases (when multiple
101 * unexpected vectors occur) that might lock up the APIC
102 * completely.
103 * But only ack when the APIC is enabled -AK
104 */ 228 */
105 if (cpu_has_apic) 229 tmp_value = apic_read(APIC_TDCR);
106 ack_APIC_irq(); 230 apic_write_around(APIC_TDCR, (tmp_value
231 & ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE))
232 | APIC_TDR_DIV_16);
233
234 apic_write_around(APIC_TMICT, clocks/APIC_DIVISOR);
107} 235}
108 236
109void __init apic_intr_init(void) 237static void __devinit setup_APIC_timer(unsigned int clocks)
110{ 238{
111#ifdef CONFIG_SMP 239 unsigned long flags;
112 smp_intr_init();
113#endif
114 /* self generated IPI for local APIC timer */
115 set_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt);
116 240
117 /* IPI vectors for APIC spurious and error interrupts */ 241 local_irq_save(flags);
118 set_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt);
119 set_intr_gate(ERROR_APIC_VECTOR, error_interrupt);
120 242
121 /* thermal monitor LVT interrupt */ 243 /*
122#ifdef CONFIG_X86_MCE_P4THERMAL 244 * Wait for IRQ0's slice:
123 set_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); 245 */
124#endif 246 wait_timer_tick();
247
248 __setup_APIC_LVTT(clocks);
249
250 local_irq_restore(flags);
125} 251}
126 252
127/* Using APIC to generate smp_local_timer_interrupt? */ 253/*
128int using_apic_timer __read_mostly = 0; 254 * In this function we calibrate APIC bus clocks to the external
255 * timer. Unfortunately we cannot use jiffies and the timer irq
256 * to calibrate, since some later bootup code depends on getting
257 * the first irq? Ugh.
258 *
259 * We want to do the calibration only once since we
260 * want to have local timer irqs syncron. CPUs connected
261 * by the same APIC bus have the very same bus frequency.
262 * And we want to have irqs off anyways, no accidental
263 * APIC irq that way.
264 */
129 265
130static int enabled_via_apicbase; 266static int __init calibrate_APIC_clock(void)
267{
268 unsigned long long t1 = 0, t2 = 0;
269 long tt1, tt2;
270 long result;
271 int i;
272 const int LOOPS = HZ/10;
131 273
132void enable_NMI_through_LVT0 (void * dummy) 274 apic_printk(APIC_VERBOSE, "calibrating APIC timer ...\n");
275
276 /*
277 * Put whatever arbitrary (but long enough) timeout
278 * value into the APIC clock, we just want to get the
279 * counter running for calibration.
280 */
281 __setup_APIC_LVTT(1000000000);
282
283 /*
284 * The timer chip counts down to zero. Let's wait
285 * for a wraparound to start exact measurement:
286 * (the current tick might have been already half done)
287 */
288
289 wait_timer_tick();
290
291 /*
292 * We wrapped around just now. Let's start:
293 */
294 if (cpu_has_tsc)
295 rdtscll(t1);
296 tt1 = apic_read(APIC_TMCCT);
297
298 /*
299 * Let's wait LOOPS wraprounds:
300 */
301 for (i = 0; i < LOOPS; i++)
302 wait_timer_tick();
303
304 tt2 = apic_read(APIC_TMCCT);
305 if (cpu_has_tsc)
306 rdtscll(t2);
307
308 /*
309 * The APIC bus clock counter is 32 bits only, it
310 * might have overflown, but note that we use signed
311 * longs, thus no extra care needed.
312 *
313 * underflown to be exact, as the timer counts down ;)
314 */
315
316 result = (tt1-tt2)*APIC_DIVISOR/LOOPS;
317
318 if (cpu_has_tsc)
319 apic_printk(APIC_VERBOSE, "..... CPU clock speed is "
320 "%ld.%04ld MHz.\n",
321 ((long)(t2-t1)/LOOPS)/(1000000/HZ),
322 ((long)(t2-t1)/LOOPS)%(1000000/HZ));
323
324 apic_printk(APIC_VERBOSE, "..... host bus clock speed is "
325 "%ld.%04ld MHz.\n",
326 result/(1000000/HZ),
327 result%(1000000/HZ));
328
329 return result;
330}
331
332static unsigned int calibration_result;
333
334void __init setup_boot_APIC_clock(void)
133{ 335{
134 unsigned int v, ver; 336 unsigned long flags;
337 apic_printk(APIC_VERBOSE, "Using local APIC timer interrupts.\n");
338 using_apic_timer = 1;
135 339
136 ver = apic_read(APIC_LVR); 340 local_irq_save(flags);
137 ver = GET_APIC_VERSION(ver); 341
138 v = APIC_DM_NMI; /* unmask and set to NMI */ 342 calibration_result = calibrate_APIC_clock();
139 if (!APIC_INTEGRATED(ver)) /* 82489DX */ 343 /*
140 v |= APIC_LVT_LEVEL_TRIGGER; 344 * Now set up the timer for real.
141 apic_write_around(APIC_LVT0, v); 345 */
346 setup_APIC_timer(calibration_result);
347
348 local_irq_restore(flags);
142} 349}
143 350
144int get_physical_broadcast(void) 351void __devinit setup_secondary_APIC_clock(void)
145{ 352{
146 if (modern_apic()) 353 setup_APIC_timer(calibration_result);
147 return 0xff;
148 else
149 return 0xf;
150} 354}
151 355
152int get_maxlvt(void) 356void disable_APIC_timer(void)
153{ 357{
154 unsigned int v, ver, maxlvt; 358 if (using_apic_timer) {
359 unsigned long v;
155 360
156 v = apic_read(APIC_LVR); 361 v = apic_read(APIC_LVTT);
157 ver = GET_APIC_VERSION(v); 362 /*
158 /* 82489DXs do not report # of LVT entries. */ 363 * When an illegal vector value (0-15) is written to an LVT
159 maxlvt = APIC_INTEGRATED(ver) ? GET_APIC_MAXLVT(v) : 2; 364 * entry and delivery mode is Fixed, the APIC may signal an
160 return maxlvt; 365 * illegal vector error, with out regard to whether the mask
366 * bit is set or whether an interrupt is actually seen on
367 * input.
368 *
369 * Boot sequence might call this function when the LVTT has
370 * '0' vector value. So make sure vector field is set to
371 * valid value.
372 */
373 v |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR);
374 apic_write_around(APIC_LVTT, v);
375 }
376}
377
378void enable_APIC_timer(void)
379{
380 int cpu = smp_processor_id();
381
382 if (using_apic_timer && !cpu_isset(cpu, timer_bcast_ipi)) {
383 unsigned long v;
384
385 v = apic_read(APIC_LVTT);
386 apic_write_around(APIC_LVTT, v & ~APIC_LVT_MASKED);
387 }
388}
389
390void switch_APIC_timer_to_ipi(void *cpumask)
391{
392 cpumask_t mask = *(cpumask_t *)cpumask;
393 int cpu = smp_processor_id();
394
395 if (cpu_isset(cpu, mask) &&
396 !cpu_isset(cpu, timer_bcast_ipi)) {
397 disable_APIC_timer();
398 cpu_set(cpu, timer_bcast_ipi);
399 }
400}
401EXPORT_SYMBOL(switch_APIC_timer_to_ipi);
402
403void switch_ipi_to_APIC_timer(void *cpumask)
404{
405 cpumask_t mask = *(cpumask_t *)cpumask;
406 int cpu = smp_processor_id();
407
408 if (cpu_isset(cpu, mask) &&
409 cpu_isset(cpu, timer_bcast_ipi)) {
410 cpu_clear(cpu, timer_bcast_ipi);
411 enable_APIC_timer();
412 }
413}
414EXPORT_SYMBOL(switch_ipi_to_APIC_timer);
415
416/*
417 * Local timer interrupt handler. It does both profiling and
418 * process statistics/rescheduling.
419 */
420inline void smp_local_timer_interrupt(void)
421{
422 profile_tick(CPU_PROFILING);
423#ifdef CONFIG_SMP
424 update_process_times(user_mode_vm(get_irq_regs()));
425#endif
426
427 /*
428 * We take the 'long' return path, and there every subsystem
429 * grabs the apropriate locks (kernel lock/ irq lock).
430 *
431 * we might want to decouple profiling from the 'long path',
432 * and do the profiling totally in assembly.
433 *
434 * Currently this isn't too much of an issue (performance wise),
435 * we can take more than 100K local irqs per second on a 100 MHz P5.
436 */
437}
438
439/*
440 * Local APIC timer interrupt. This is the most natural way for doing
441 * local interrupts, but local timer interrupts can be emulated by
442 * broadcast interrupts too. [in case the hw doesn't support APIC timers]
443 *
444 * [ if a single-CPU system runs an SMP kernel then we call the local
445 * interrupt as well. Thus we cannot inline the local irq ... ]
446 */
447
448fastcall void smp_apic_timer_interrupt(struct pt_regs *regs)
449{
450 struct pt_regs *old_regs = set_irq_regs(regs);
451 int cpu = smp_processor_id();
452
453 /*
454 * the NMI deadlock-detector uses this.
455 */
456 per_cpu(irq_stat, cpu).apic_timer_irqs++;
457
458 /*
459 * NOTE! We'd better ACK the irq immediately,
460 * because timer handling can be slow.
461 */
462 ack_APIC_irq();
463 /*
464 * update_process_times() expects us to have done irq_enter().
465 * Besides, if we don't timer interrupts ignore the global
466 * interrupt lock, which is the WrongThing (tm) to do.
467 */
468 exit_idle();
469 irq_enter();
470 smp_local_timer_interrupt();
471 irq_exit();
472 set_irq_regs(old_regs);
473}
474
475#ifndef CONFIG_SMP
476static void up_apic_timer_interrupt_call(void)
477{
478 int cpu = smp_processor_id();
479
480 /*
481 * the NMI deadlock-detector uses this.
482 */
483 per_cpu(irq_stat, cpu).apic_timer_irqs++;
484
485 smp_local_timer_interrupt();
486}
487#endif
488
489void smp_send_timer_broadcast_ipi(void)
490{
491 cpumask_t mask;
492
493 cpus_and(mask, cpu_online_map, timer_bcast_ipi);
494 if (!cpus_empty(mask)) {
495#ifdef CONFIG_SMP
496 send_IPI_mask(mask, LOCAL_TIMER_VECTOR);
497#else
498 /*
499 * We can directly call the apic timer interrupt handler
500 * in UP case. Minus all irq related functions
501 */
502 up_apic_timer_interrupt_call();
503#endif
504 }
505}
506
507int setup_profiling_timer(unsigned int multiplier)
508{
509 return -EINVAL;
161} 510}
162 511
512/*
513 * Local APIC start and shutdown
514 */
515
516/**
517 * clear_local_APIC - shutdown the local APIC
518 *
519 * This is called, when a CPU is disabled and before rebooting, so the state of
520 * the local APIC has no dangling leftovers. Also used to cleanout any BIOS
521 * leftovers during boot.
522 */
163void clear_local_APIC(void) 523void clear_local_APIC(void)
164{ 524{
165 int maxlvt; 525 int maxlvt = lapic_get_maxlvt();
166 unsigned long v; 526 unsigned long v;
167 527
168 maxlvt = get_maxlvt();
169
170 /* 528 /*
171 * Masking an LVT entry can trigger a local APIC error 529 * Masking an LVT entry can trigger a local APIC error
172 * if the vector is zero. Mask LVTERR first to prevent this. 530 * if the vector is zero. Mask LVTERR first to prevent this.
@@ -190,7 +548,7 @@ void clear_local_APIC(void)
190 apic_write_around(APIC_LVTPC, v | APIC_LVT_MASKED); 548 apic_write_around(APIC_LVTPC, v | APIC_LVT_MASKED);
191 } 549 }
192 550
193/* lets not touch this if we didn't frob it */ 551 /* lets not touch this if we didn't frob it */
194#ifdef CONFIG_X86_MCE_P4THERMAL 552#ifdef CONFIG_X86_MCE_P4THERMAL
195 if (maxlvt >= 5) { 553 if (maxlvt >= 5) {
196 v = apic_read(APIC_LVTTHMR); 554 v = apic_read(APIC_LVTTHMR);
@@ -212,85 +570,18 @@ void clear_local_APIC(void)
212 if (maxlvt >= 5) 570 if (maxlvt >= 5)
213 apic_write_around(APIC_LVTTHMR, APIC_LVT_MASKED); 571 apic_write_around(APIC_LVTTHMR, APIC_LVT_MASKED);
214#endif 572#endif
215 v = GET_APIC_VERSION(apic_read(APIC_LVR)); 573 /* Integrated APIC (!82489DX) ? */
216 if (APIC_INTEGRATED(v)) { /* !82489DX */ 574 if (lapic_is_integrated()) {
217 if (maxlvt > 3) /* Due to Pentium errata 3AP and 11AP. */ 575 if (maxlvt > 3)
576 /* Clear ESR due to Pentium errata 3AP and 11AP */
218 apic_write(APIC_ESR, 0); 577 apic_write(APIC_ESR, 0);
219 apic_read(APIC_ESR); 578 apic_read(APIC_ESR);
220 } 579 }
221} 580}
222 581
223void __init connect_bsp_APIC(void) 582/**
224{ 583 * disable_local_APIC - clear and disable the local APIC
225 if (pic_mode) { 584 */
226 /*
227 * Do not trust the local APIC being empty at bootup.
228 */
229 clear_local_APIC();
230 /*
231 * PIC mode, enable APIC mode in the IMCR, i.e.
232 * connect BSP's local APIC to INT and NMI lines.
233 */
234 apic_printk(APIC_VERBOSE, "leaving PIC mode, "
235 "enabling APIC mode.\n");
236 outb(0x70, 0x22);
237 outb(0x01, 0x23);
238 }
239 enable_apic_mode();
240}
241
242void disconnect_bsp_APIC(int virt_wire_setup)
243{
244 if (pic_mode) {
245 /*
246 * Put the board back into PIC mode (has an effect
247 * only on certain older boards). Note that APIC
248 * interrupts, including IPIs, won't work beyond
249 * this point! The only exception are INIT IPIs.
250 */
251 apic_printk(APIC_VERBOSE, "disabling APIC mode, "
252 "entering PIC mode.\n");
253 outb(0x70, 0x22);
254 outb(0x00, 0x23);
255 }
256 else {
257 /* Go back to Virtual Wire compatibility mode */
258 unsigned long value;
259
260 /* For the spurious interrupt use vector F, and enable it */
261 value = apic_read(APIC_SPIV);
262 value &= ~APIC_VECTOR_MASK;
263 value |= APIC_SPIV_APIC_ENABLED;
264 value |= 0xf;
265 apic_write_around(APIC_SPIV, value);
266
267 if (!virt_wire_setup) {
268 /* For LVT0 make it edge triggered, active high, external and enabled */
269 value = apic_read(APIC_LVT0);
270 value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING |
271 APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR |
272 APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED );
273 value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING;
274 value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_EXTINT);
275 apic_write_around(APIC_LVT0, value);
276 }
277 else {
278 /* Disable LVT0 */
279 apic_write_around(APIC_LVT0, APIC_LVT_MASKED);
280 }
281
282 /* For LVT1 make it edge triggered, active high, nmi and enabled */
283 value = apic_read(APIC_LVT1);
284 value &= ~(
285 APIC_MODE_MASK | APIC_SEND_PENDING |
286 APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR |
287 APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED);
288 value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING;
289 value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_NMI);
290 apic_write_around(APIC_LVT1, value);
291 }
292}
293
294void disable_local_APIC(void) 585void disable_local_APIC(void)
295{ 586{
296 unsigned long value; 587 unsigned long value;
@@ -305,8 +596,13 @@ void disable_local_APIC(void)
305 value &= ~APIC_SPIV_APIC_ENABLED; 596 value &= ~APIC_SPIV_APIC_ENABLED;
306 apic_write_around(APIC_SPIV, value); 597 apic_write_around(APIC_SPIV, value);
307 598
599 /*
600 * When LAPIC was disabled by the BIOS and enabled by the kernel,
601 * restore the disabled state.
602 */
308 if (enabled_via_apicbase) { 603 if (enabled_via_apicbase) {
309 unsigned int l, h; 604 unsigned int l, h;
605
310 rdmsr(MSR_IA32_APICBASE, l, h); 606 rdmsr(MSR_IA32_APICBASE, l, h);
311 l &= ~MSR_IA32_APICBASE_ENABLE; 607 l &= ~MSR_IA32_APICBASE_ENABLE;
312 wrmsr(MSR_IA32_APICBASE, l, h); 608 wrmsr(MSR_IA32_APICBASE, l, h);
@@ -314,6 +610,28 @@ void disable_local_APIC(void)
314} 610}
315 611
316/* 612/*
613 * If Linux enabled the LAPIC against the BIOS default disable it down before
614 * re-entering the BIOS on shutdown. Otherwise the BIOS may get confused and
615 * not power-off. Additionally clear all LVT entries before disable_local_APIC
616 * for the case where Linux didn't enable the LAPIC.
617 */
618void lapic_shutdown(void)
619{
620 unsigned long flags;
621
622 if (!cpu_has_apic)
623 return;
624
625 local_irq_save(flags);
626 clear_local_APIC();
627
628 if (enabled_via_apicbase)
629 disable_local_APIC();
630
631 local_irq_restore(flags);
632}
633
634/*
317 * This is to verify that we're looking at a real local APIC. 635 * This is to verify that we're looking at a real local APIC.
318 * Check these against your board if the CPUs aren't getting 636 * Check these against your board if the CPUs aren't getting
319 * started for no apparent reason. 637 * started for no apparent reason.
@@ -345,7 +663,7 @@ int __init verify_local_APIC(void)
345 reg1 = GET_APIC_VERSION(reg0); 663 reg1 = GET_APIC_VERSION(reg0);
346 if (reg1 == 0x00 || reg1 == 0xff) 664 if (reg1 == 0x00 || reg1 == 0xff)
347 return 0; 665 return 0;
348 reg1 = get_maxlvt(); 666 reg1 = lapic_get_maxlvt();
349 if (reg1 < 0x02 || reg1 == 0xff) 667 if (reg1 < 0x02 || reg1 == 0xff)
350 return 0; 668 return 0;
351 669
@@ -368,10 +686,15 @@ int __init verify_local_APIC(void)
368 return 1; 686 return 1;
369} 687}
370 688
689/**
690 * sync_Arb_IDs - synchronize APIC bus arbitration IDs
691 */
371void __init sync_Arb_IDs(void) 692void __init sync_Arb_IDs(void)
372{ 693{
373 /* Unsupported on P4 - see Intel Dev. Manual Vol. 3, Ch. 8.6.1 694 /*
374 And not needed on AMD */ 695 * Unsupported on P4 - see Intel Dev. Manual Vol. 3, Ch. 8.6.1 And not
696 * needed on AMD.
697 */
375 if (modern_apic()) 698 if (modern_apic())
376 return; 699 return;
377 /* 700 /*
@@ -384,14 +707,12 @@ void __init sync_Arb_IDs(void)
384 | APIC_DM_INIT); 707 | APIC_DM_INIT);
385} 708}
386 709
387extern void __error_in_apic_c (void);
388
389/* 710/*
390 * An initial setup of the virtual wire mode. 711 * An initial setup of the virtual wire mode.
391 */ 712 */
392void __init init_bsp_APIC(void) 713void __init init_bsp_APIC(void)
393{ 714{
394 unsigned long value, ver; 715 unsigned long value;
395 716
396 /* 717 /*
397 * Don't do the setup now if we have a SMP BIOS as the 718 * Don't do the setup now if we have a SMP BIOS as the
@@ -400,9 +721,6 @@ void __init init_bsp_APIC(void)
400 if (smp_found_config || !cpu_has_apic) 721 if (smp_found_config || !cpu_has_apic)
401 return; 722 return;
402 723
403 value = apic_read(APIC_LVR);
404 ver = GET_APIC_VERSION(value);
405
406 /* 724 /*
407 * Do not trust the local APIC being empty at bootup. 725 * Do not trust the local APIC being empty at bootup.
408 */ 726 */
@@ -414,9 +732,10 @@ void __init init_bsp_APIC(void)
414 value = apic_read(APIC_SPIV); 732 value = apic_read(APIC_SPIV);
415 value &= ~APIC_VECTOR_MASK; 733 value &= ~APIC_VECTOR_MASK;
416 value |= APIC_SPIV_APIC_ENABLED; 734 value |= APIC_SPIV_APIC_ENABLED;
417 735
418 /* This bit is reserved on P4/Xeon and should be cleared */ 736 /* This bit is reserved on P4/Xeon and should be cleared */
419 if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && (boot_cpu_data.x86 == 15)) 737 if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) &&
738 (boot_cpu_data.x86 == 15))
420 value &= ~APIC_SPIV_FOCUS_DISABLED; 739 value &= ~APIC_SPIV_FOCUS_DISABLED;
421 else 740 else
422 value |= APIC_SPIV_FOCUS_DISABLED; 741 value |= APIC_SPIV_FOCUS_DISABLED;
@@ -428,14 +747,17 @@ void __init init_bsp_APIC(void)
428 */ 747 */
429 apic_write_around(APIC_LVT0, APIC_DM_EXTINT); 748 apic_write_around(APIC_LVT0, APIC_DM_EXTINT);
430 value = APIC_DM_NMI; 749 value = APIC_DM_NMI;
431 if (!APIC_INTEGRATED(ver)) /* 82489DX */ 750 if (!lapic_is_integrated()) /* 82489DX */
432 value |= APIC_LVT_LEVEL_TRIGGER; 751 value |= APIC_LVT_LEVEL_TRIGGER;
433 apic_write_around(APIC_LVT1, value); 752 apic_write_around(APIC_LVT1, value);
434} 753}
435 754
755/**
756 * setup_local_APIC - setup the local APIC
757 */
436void __devinit setup_local_APIC(void) 758void __devinit setup_local_APIC(void)
437{ 759{
438 unsigned long oldvalue, value, ver, maxlvt; 760 unsigned long oldvalue, value, maxlvt, integrated;
439 int i, j; 761 int i, j;
440 762
441 /* Pound the ESR really hard over the head with a big hammer - mbligh */ 763 /* Pound the ESR really hard over the head with a big hammer - mbligh */
@@ -446,11 +768,7 @@ void __devinit setup_local_APIC(void)
446 apic_write(APIC_ESR, 0); 768 apic_write(APIC_ESR, 0);
447 } 769 }
448 770
449 value = apic_read(APIC_LVR); 771 integrated = lapic_is_integrated();
450 ver = GET_APIC_VERSION(value);
451
452 if ((SPURIOUS_APIC_VECTOR & 0x0f) != 0x0f)
453 __error_in_apic_c();
454 772
455 /* 773 /*
456 * Double-check whether this APIC is really registered. 774 * Double-check whether this APIC is really registered.
@@ -521,13 +839,10 @@ void __devinit setup_local_APIC(void)
521 * like LRU than MRU (the short-term load is more even across CPUs). 839 * like LRU than MRU (the short-term load is more even across CPUs).
522 * See also the comment in end_level_ioapic_irq(). --macro 840 * See also the comment in end_level_ioapic_irq(). --macro
523 */ 841 */
524#if 1 842
525 /* Enable focus processor (bit==0) */ 843 /* Enable focus processor (bit==0) */
526 value &= ~APIC_SPIV_FOCUS_DISABLED; 844 value &= ~APIC_SPIV_FOCUS_DISABLED;
527#else 845
528 /* Disable focus processor (bit==1) */
529 value |= APIC_SPIV_FOCUS_DISABLED;
530#endif
531 /* 846 /*
532 * Set spurious IRQ vector 847 * Set spurious IRQ vector
533 */ 848 */
@@ -563,17 +878,18 @@ void __devinit setup_local_APIC(void)
563 value = APIC_DM_NMI; 878 value = APIC_DM_NMI;
564 else 879 else
565 value = APIC_DM_NMI | APIC_LVT_MASKED; 880 value = APIC_DM_NMI | APIC_LVT_MASKED;
566 if (!APIC_INTEGRATED(ver)) /* 82489DX */ 881 if (!integrated) /* 82489DX */
567 value |= APIC_LVT_LEVEL_TRIGGER; 882 value |= APIC_LVT_LEVEL_TRIGGER;
568 apic_write_around(APIC_LVT1, value); 883 apic_write_around(APIC_LVT1, value);
569 884
570 if (APIC_INTEGRATED(ver) && !esr_disable) { /* !82489DX */ 885 if (integrated && !esr_disable) { /* !82489DX */
571 maxlvt = get_maxlvt(); 886 maxlvt = lapic_get_maxlvt();
572 if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */ 887 if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */
573 apic_write(APIC_ESR, 0); 888 apic_write(APIC_ESR, 0);
574 oldvalue = apic_read(APIC_ESR); 889 oldvalue = apic_read(APIC_ESR);
575 890
576 value = ERROR_APIC_VECTOR; // enables sending errors 891 /* enables sending errors */
892 value = ERROR_APIC_VECTOR;
577 apic_write_around(APIC_LVTERR, value); 893 apic_write_around(APIC_LVTERR, value);
578 /* 894 /*
579 * spec says clear errors after enabling vector. 895 * spec says clear errors after enabling vector.
@@ -586,16 +902,16 @@ void __devinit setup_local_APIC(void)
586 "vector: 0x%08lx after: 0x%08lx\n", 902 "vector: 0x%08lx after: 0x%08lx\n",
587 oldvalue, value); 903 oldvalue, value);
588 } else { 904 } else {
589 if (esr_disable) 905 if (esr_disable)
590 /* 906 /*
591 * Something untraceble is creating bad interrupts on 907 * Something untraceble is creating bad interrupts on
592 * secondary quads ... for the moment, just leave the 908 * secondary quads ... for the moment, just leave the
593 * ESR disabled - we can't do anything useful with the 909 * ESR disabled - we can't do anything useful with the
594 * errors anyway - mbligh 910 * errors anyway - mbligh
595 */ 911 */
596 printk("Leaving ESR disabled.\n"); 912 printk(KERN_INFO "Leaving ESR disabled.\n");
597 else 913 else
598 printk("No ESR for 82489DX.\n"); 914 printk(KERN_INFO "No ESR for 82489DX.\n");
599 } 915 }
600 916
601 setup_apic_nmi_watchdog(NULL); 917 setup_apic_nmi_watchdog(NULL);
@@ -603,190 +919,8 @@ void __devinit setup_local_APIC(void)
603} 919}
604 920
605/* 921/*
606 * If Linux enabled the LAPIC against the BIOS default 922 * Detect and initialize APIC
607 * disable it down before re-entering the BIOS on shutdown.
608 * Otherwise the BIOS may get confused and not power-off.
609 * Additionally clear all LVT entries before disable_local_APIC
610 * for the case where Linux didn't enable the LAPIC.
611 */
612void lapic_shutdown(void)
613{
614 unsigned long flags;
615
616 if (!cpu_has_apic)
617 return;
618
619 local_irq_save(flags);
620 clear_local_APIC();
621
622 if (enabled_via_apicbase)
623 disable_local_APIC();
624
625 local_irq_restore(flags);
626}
627
628#ifdef CONFIG_PM
629
630static struct {
631 int active;
632 /* r/w apic fields */
633 unsigned int apic_id;
634 unsigned int apic_taskpri;
635 unsigned int apic_ldr;
636 unsigned int apic_dfr;
637 unsigned int apic_spiv;
638 unsigned int apic_lvtt;
639 unsigned int apic_lvtpc;
640 unsigned int apic_lvt0;
641 unsigned int apic_lvt1;
642 unsigned int apic_lvterr;
643 unsigned int apic_tmict;
644 unsigned int apic_tdcr;
645 unsigned int apic_thmr;
646} apic_pm_state;
647
648static int lapic_suspend(struct sys_device *dev, pm_message_t state)
649{
650 unsigned long flags;
651 int maxlvt;
652
653 if (!apic_pm_state.active)
654 return 0;
655
656 maxlvt = get_maxlvt();
657
658 apic_pm_state.apic_id = apic_read(APIC_ID);
659 apic_pm_state.apic_taskpri = apic_read(APIC_TASKPRI);
660 apic_pm_state.apic_ldr = apic_read(APIC_LDR);
661 apic_pm_state.apic_dfr = apic_read(APIC_DFR);
662 apic_pm_state.apic_spiv = apic_read(APIC_SPIV);
663 apic_pm_state.apic_lvtt = apic_read(APIC_LVTT);
664 if (maxlvt >= 4)
665 apic_pm_state.apic_lvtpc = apic_read(APIC_LVTPC);
666 apic_pm_state.apic_lvt0 = apic_read(APIC_LVT0);
667 apic_pm_state.apic_lvt1 = apic_read(APIC_LVT1);
668 apic_pm_state.apic_lvterr = apic_read(APIC_LVTERR);
669 apic_pm_state.apic_tmict = apic_read(APIC_TMICT);
670 apic_pm_state.apic_tdcr = apic_read(APIC_TDCR);
671#ifdef CONFIG_X86_MCE_P4THERMAL
672 if (maxlvt >= 5)
673 apic_pm_state.apic_thmr = apic_read(APIC_LVTTHMR);
674#endif
675
676 local_irq_save(flags);
677 disable_local_APIC();
678 local_irq_restore(flags);
679 return 0;
680}
681
682static int lapic_resume(struct sys_device *dev)
683{
684 unsigned int l, h;
685 unsigned long flags;
686 int maxlvt;
687
688 if (!apic_pm_state.active)
689 return 0;
690
691 maxlvt = get_maxlvt();
692
693 local_irq_save(flags);
694
695 /*
696 * Make sure the APICBASE points to the right address
697 *
698 * FIXME! This will be wrong if we ever support suspend on
699 * SMP! We'll need to do this as part of the CPU restore!
700 */
701 rdmsr(MSR_IA32_APICBASE, l, h);
702 l &= ~MSR_IA32_APICBASE_BASE;
703 l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr;
704 wrmsr(MSR_IA32_APICBASE, l, h);
705
706 apic_write(APIC_LVTERR, ERROR_APIC_VECTOR | APIC_LVT_MASKED);
707 apic_write(APIC_ID, apic_pm_state.apic_id);
708 apic_write(APIC_DFR, apic_pm_state.apic_dfr);
709 apic_write(APIC_LDR, apic_pm_state.apic_ldr);
710 apic_write(APIC_TASKPRI, apic_pm_state.apic_taskpri);
711 apic_write(APIC_SPIV, apic_pm_state.apic_spiv);
712 apic_write(APIC_LVT0, apic_pm_state.apic_lvt0);
713 apic_write(APIC_LVT1, apic_pm_state.apic_lvt1);
714#ifdef CONFIG_X86_MCE_P4THERMAL
715 if (maxlvt >= 5)
716 apic_write(APIC_LVTTHMR, apic_pm_state.apic_thmr);
717#endif
718 if (maxlvt >= 4)
719 apic_write(APIC_LVTPC, apic_pm_state.apic_lvtpc);
720 apic_write(APIC_LVTT, apic_pm_state.apic_lvtt);
721 apic_write(APIC_TDCR, apic_pm_state.apic_tdcr);
722 apic_write(APIC_TMICT, apic_pm_state.apic_tmict);
723 apic_write(APIC_ESR, 0);
724 apic_read(APIC_ESR);
725 apic_write(APIC_LVTERR, apic_pm_state.apic_lvterr);
726 apic_write(APIC_ESR, 0);
727 apic_read(APIC_ESR);
728 local_irq_restore(flags);
729 return 0;
730}
731
732/*
733 * This device has no shutdown method - fully functioning local APICs
734 * are needed on every CPU up until machine_halt/restart/poweroff.
735 */
736
737static struct sysdev_class lapic_sysclass = {
738 set_kset_name("lapic"),
739 .resume = lapic_resume,
740 .suspend = lapic_suspend,
741};
742
743static struct sys_device device_lapic = {
744 .id = 0,
745 .cls = &lapic_sysclass,
746};
747
748static void __devinit apic_pm_activate(void)
749{
750 apic_pm_state.active = 1;
751}
752
753static int __init init_lapic_sysfs(void)
754{
755 int error;
756
757 if (!cpu_has_apic)
758 return 0;
759 /* XXX: remove suspend/resume procs if !apic_pm_state.active? */
760
761 error = sysdev_class_register(&lapic_sysclass);
762 if (!error)
763 error = sysdev_register(&device_lapic);
764 return error;
765}
766device_initcall(init_lapic_sysfs);
767
768#else /* CONFIG_PM */
769
770static void apic_pm_activate(void) { }
771
772#endif /* CONFIG_PM */
773
774/*
775 * Detect and enable local APICs on non-SMP boards.
776 * Original code written by Keir Fraser.
777 */ 923 */
778
779static int __init apic_set_verbosity(char *str)
780{
781 if (strcmp("debug", str) == 0)
782 apic_verbosity = APIC_DEBUG;
783 else if (strcmp("verbose", str) == 0)
784 apic_verbosity = APIC_VERBOSE;
785 return 1;
786}
787
788__setup("apic=", apic_set_verbosity);
789
790static int __init detect_init_APIC (void) 924static int __init detect_init_APIC (void)
791{ 925{
792 u32 h, l, features; 926 u32 h, l, features;
@@ -798,7 +932,7 @@ static int __init detect_init_APIC (void)
798 switch (boot_cpu_data.x86_vendor) { 932 switch (boot_cpu_data.x86_vendor) {
799 case X86_VENDOR_AMD: 933 case X86_VENDOR_AMD:
800 if ((boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model > 1) || 934 if ((boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model > 1) ||
801 (boot_cpu_data.x86 == 15)) 935 (boot_cpu_data.x86 == 15))
802 break; 936 break;
803 goto no_apic; 937 goto no_apic;
804 case X86_VENDOR_INTEL: 938 case X86_VENDOR_INTEL:
@@ -812,23 +946,23 @@ static int __init detect_init_APIC (void)
812 946
813 if (!cpu_has_apic) { 947 if (!cpu_has_apic) {
814 /* 948 /*
815 * Over-ride BIOS and try to enable the local 949 * Over-ride BIOS and try to enable the local APIC only if
816 * APIC only if "lapic" specified. 950 * "lapic" specified.
817 */ 951 */
818 if (enable_local_apic <= 0) { 952 if (enable_local_apic <= 0) {
819 printk("Local APIC disabled by BIOS -- " 953 printk(KERN_INFO "Local APIC disabled by BIOS -- "
820 "you can enable it with \"lapic\"\n"); 954 "you can enable it with \"lapic\"\n");
821 return -1; 955 return -1;
822 } 956 }
823 /* 957 /*
824 * Some BIOSes disable the local APIC in the 958 * Some BIOSes disable the local APIC in the APIC_BASE
825 * APIC_BASE MSR. This can only be done in 959 * MSR. This can only be done in software for Intel P6 or later
826 * software for Intel P6 or later and AMD K7 960 * and AMD K7 (Model > 1) or later.
827 * (Model > 1) or later.
828 */ 961 */
829 rdmsr(MSR_IA32_APICBASE, l, h); 962 rdmsr(MSR_IA32_APICBASE, l, h);
830 if (!(l & MSR_IA32_APICBASE_ENABLE)) { 963 if (!(l & MSR_IA32_APICBASE_ENABLE)) {
831 printk("Local APIC disabled by BIOS -- reenabling.\n"); 964 printk(KERN_INFO
965 "Local APIC disabled by BIOS -- reenabling.\n");
832 l &= ~MSR_IA32_APICBASE_BASE; 966 l &= ~MSR_IA32_APICBASE_BASE;
833 l |= MSR_IA32_APICBASE_ENABLE | APIC_DEFAULT_PHYS_BASE; 967 l |= MSR_IA32_APICBASE_ENABLE | APIC_DEFAULT_PHYS_BASE;
834 wrmsr(MSR_IA32_APICBASE, l, h); 968 wrmsr(MSR_IA32_APICBASE, l, h);
@@ -841,7 +975,7 @@ static int __init detect_init_APIC (void)
841 */ 975 */
842 features = cpuid_edx(1); 976 features = cpuid_edx(1);
843 if (!(features & (1 << X86_FEATURE_APIC))) { 977 if (!(features & (1 << X86_FEATURE_APIC))) {
844 printk("Could not enable APIC!\n"); 978 printk(KERN_WARNING "Could not enable APIC!\n");
845 return -1; 979 return -1;
846 } 980 }
847 set_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability); 981 set_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability);
@@ -855,17 +989,20 @@ static int __init detect_init_APIC (void)
855 if (nmi_watchdog != NMI_NONE) 989 if (nmi_watchdog != NMI_NONE)
856 nmi_watchdog = NMI_LOCAL_APIC; 990 nmi_watchdog = NMI_LOCAL_APIC;
857 991
858 printk("Found and enabled local APIC!\n"); 992 printk(KERN_INFO "Found and enabled local APIC!\n");
859 993
860 apic_pm_activate(); 994 apic_pm_activate();
861 995
862 return 0; 996 return 0;
863 997
864no_apic: 998no_apic:
865 printk("No local APIC present or hardware disabled\n"); 999 printk(KERN_INFO "No local APIC present or hardware disabled\n");
866 return -1; 1000 return -1;
867} 1001}
868 1002
1003/**
1004 * init_apic_mappings - initialize APIC mappings
1005 */
869void __init init_apic_mappings(void) 1006void __init init_apic_mappings(void)
870{ 1007{
871 unsigned long apic_phys; 1008 unsigned long apic_phys;
@@ -925,381 +1062,88 @@ fake_ioapic_page:
925} 1062}
926 1063
927/* 1064/*
928 * This part sets up the APIC 32 bit clock in LVTT1, with HZ interrupts 1065 * This initializes the IO-APIC and APIC hardware if this is
929 * per second. We assume that the caller has already set up the local 1066 * a UP kernel.
930 * APIC.
931 *
932 * The APIC timer is not exactly sync with the external timer chip, it
933 * closely follows bus clocks.
934 */
935
936/*
937 * The timer chip is already set up at HZ interrupts per second here,
938 * but we do not accept timer interrupts yet. We only allow the BP
939 * to calibrate.
940 */
941static unsigned int __devinit get_8254_timer_count(void)
942{
943 unsigned long flags;
944
945 unsigned int count;
946
947 spin_lock_irqsave(&i8253_lock, flags);
948
949 outb_p(0x00, PIT_MODE);
950 count = inb_p(PIT_CH0);
951 count |= inb_p(PIT_CH0) << 8;
952
953 spin_unlock_irqrestore(&i8253_lock, flags);
954
955 return count;
956}
957
958/* next tick in 8254 can be caught by catching timer wraparound */
959static void __devinit wait_8254_wraparound(void)
960{
961 unsigned int curr_count, prev_count;
962
963 curr_count = get_8254_timer_count();
964 do {
965 prev_count = curr_count;
966 curr_count = get_8254_timer_count();
967
968 /* workaround for broken Mercury/Neptune */
969 if (prev_count >= curr_count + 0x100)
970 curr_count = get_8254_timer_count();
971
972 } while (prev_count >= curr_count);
973}
974
975/*
976 * Default initialization for 8254 timers. If we use other timers like HPET,
977 * we override this later
978 */
979void (*wait_timer_tick)(void) __devinitdata = wait_8254_wraparound;
980
981/*
982 * This function sets up the local APIC timer, with a timeout of
983 * 'clocks' APIC bus clock. During calibration we actually call
984 * this function twice on the boot CPU, once with a bogus timeout
985 * value, second time for real. The other (noncalibrating) CPUs
986 * call this function only once, with the real, calibrated value.
987 *
988 * We do reads before writes even if unnecessary, to get around the
989 * P5 APIC double write bug.
990 */ 1067 */
991 1068int __init APIC_init_uniprocessor (void)
992#define APIC_DIVISOR 16
993
994static void __setup_APIC_LVTT(unsigned int clocks)
995{ 1069{
996 unsigned int lvtt_value, tmp_value, ver; 1070 if (enable_local_apic < 0)
997 int cpu = smp_processor_id(); 1071 clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability);
998
999 ver = GET_APIC_VERSION(apic_read(APIC_LVR));
1000 lvtt_value = APIC_LVT_TIMER_PERIODIC | LOCAL_TIMER_VECTOR;
1001 if (!APIC_INTEGRATED(ver))
1002 lvtt_value |= SET_APIC_TIMER_BASE(APIC_TIMER_BASE_DIV);
1003
1004 if (cpu_isset(cpu, timer_bcast_ipi))
1005 lvtt_value |= APIC_LVT_MASKED;
1006 1072
1007 apic_write_around(APIC_LVTT, lvtt_value); 1073 if (!smp_found_config && !cpu_has_apic)
1074 return -1;
1008 1075
1009 /* 1076 /*
1010 * Divide PICLK by 16 1077 * Complain if the BIOS pretends there is one.
1011 */ 1078 */
1012 tmp_value = apic_read(APIC_TDCR); 1079 if (!cpu_has_apic &&
1013 apic_write_around(APIC_TDCR, (tmp_value 1080 APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid])) {
1014 & ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE)) 1081 printk(KERN_ERR "BIOS bug, local APIC #%d not detected!...\n",
1015 | APIC_TDR_DIV_16); 1082 boot_cpu_physical_apicid);
1016 1083 clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability);
1017 apic_write_around(APIC_TMICT, clocks/APIC_DIVISOR); 1084 return -1;
1018} 1085 }
1019 1086
1020static void __devinit setup_APIC_timer(unsigned int clocks) 1087 verify_local_APIC();
1021{
1022 unsigned long flags;
1023 1088
1024 local_irq_save(flags); 1089 connect_bsp_APIC();
1025 1090
1026 /* 1091 /*
1027 * Wait for IRQ0's slice: 1092 * Hack: In case of kdump, after a crash, kernel might be booting
1093 * on a cpu with non-zero lapic id. But boot_cpu_physical_apicid
1094 * might be zero if read from MP tables. Get it from LAPIC.
1028 */ 1095 */
1029 wait_timer_tick(); 1096#ifdef CONFIG_CRASH_DUMP
1097 boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID));
1098#endif
1099 phys_cpu_present_map = physid_mask_of_physid(boot_cpu_physical_apicid);
1030 1100
1031 __setup_APIC_LVTT(clocks); 1101 setup_local_APIC();
1032 1102
1033 local_irq_restore(flags); 1103#ifdef CONFIG_X86_IO_APIC
1104 if (smp_found_config)
1105 if (!skip_ioapic_setup && nr_ioapics)
1106 setup_IO_APIC();
1107#endif
1108 setup_boot_clock();
1109
1110 return 0;
1034} 1111}
1035 1112
1036/* 1113/*
1037 * In this function we calibrate APIC bus clocks to the external 1114 * APIC command line parameters
1038 * timer. Unfortunately we cannot use jiffies and the timer irq
1039 * to calibrate, since some later bootup code depends on getting
1040 * the first irq? Ugh.
1041 *
1042 * We want to do the calibration only once since we
1043 * want to have local timer irqs syncron. CPUs connected
1044 * by the same APIC bus have the very same bus frequency.
1045 * And we want to have irqs off anyways, no accidental
1046 * APIC irq that way.
1047 */ 1115 */
1048 1116static int __init parse_lapic(char *arg)
1049static int __init calibrate_APIC_clock(void)
1050{
1051 unsigned long long t1 = 0, t2 = 0;
1052 long tt1, tt2;
1053 long result;
1054 int i;
1055 const int LOOPS = HZ/10;
1056
1057 apic_printk(APIC_VERBOSE, "calibrating APIC timer ...\n");
1058
1059 /*
1060 * Put whatever arbitrary (but long enough) timeout
1061 * value into the APIC clock, we just want to get the
1062 * counter running for calibration.
1063 */
1064 __setup_APIC_LVTT(1000000000);
1065
1066 /*
1067 * The timer chip counts down to zero. Let's wait
1068 * for a wraparound to start exact measurement:
1069 * (the current tick might have been already half done)
1070 */
1071
1072 wait_timer_tick();
1073
1074 /*
1075 * We wrapped around just now. Let's start:
1076 */
1077 if (cpu_has_tsc)
1078 rdtscll(t1);
1079 tt1 = apic_read(APIC_TMCCT);
1080
1081 /*
1082 * Let's wait LOOPS wraprounds:
1083 */
1084 for (i = 0; i < LOOPS; i++)
1085 wait_timer_tick();
1086
1087 tt2 = apic_read(APIC_TMCCT);
1088 if (cpu_has_tsc)
1089 rdtscll(t2);
1090
1091 /*
1092 * The APIC bus clock counter is 32 bits only, it
1093 * might have overflown, but note that we use signed
1094 * longs, thus no extra care needed.
1095 *
1096 * underflown to be exact, as the timer counts down ;)
1097 */
1098
1099 result = (tt1-tt2)*APIC_DIVISOR/LOOPS;
1100
1101 if (cpu_has_tsc)
1102 apic_printk(APIC_VERBOSE, "..... CPU clock speed is "
1103 "%ld.%04ld MHz.\n",
1104 ((long)(t2-t1)/LOOPS)/(1000000/HZ),
1105 ((long)(t2-t1)/LOOPS)%(1000000/HZ));
1106
1107 apic_printk(APIC_VERBOSE, "..... host bus clock speed is "
1108 "%ld.%04ld MHz.\n",
1109 result/(1000000/HZ),
1110 result%(1000000/HZ));
1111
1112 return result;
1113}
1114
1115static unsigned int calibration_result;
1116
1117void __init setup_boot_APIC_clock(void)
1118{
1119 unsigned long flags;
1120 apic_printk(APIC_VERBOSE, "Using local APIC timer interrupts.\n");
1121 using_apic_timer = 1;
1122
1123 local_irq_save(flags);
1124
1125 calibration_result = calibrate_APIC_clock();
1126 /*
1127 * Now set up the timer for real.
1128 */
1129 setup_APIC_timer(calibration_result);
1130
1131 local_irq_restore(flags);
1132}
1133
1134void __devinit setup_secondary_APIC_clock(void)
1135{
1136 setup_APIC_timer(calibration_result);
1137}
1138
1139void disable_APIC_timer(void)
1140{
1141 if (using_apic_timer) {
1142 unsigned long v;
1143
1144 v = apic_read(APIC_LVTT);
1145 /*
1146 * When an illegal vector value (0-15) is written to an LVT
1147 * entry and delivery mode is Fixed, the APIC may signal an
1148 * illegal vector error, with out regard to whether the mask
1149 * bit is set or whether an interrupt is actually seen on input.
1150 *
1151 * Boot sequence might call this function when the LVTT has
1152 * '0' vector value. So make sure vector field is set to
1153 * valid value.
1154 */
1155 v |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR);
1156 apic_write_around(APIC_LVTT, v);
1157 }
1158}
1159
1160void enable_APIC_timer(void)
1161{ 1117{
1162 int cpu = smp_processor_id(); 1118 enable_local_apic = 1;
1163 1119 return 0;
1164 if (using_apic_timer &&
1165 !cpu_isset(cpu, timer_bcast_ipi)) {
1166 unsigned long v;
1167
1168 v = apic_read(APIC_LVTT);
1169 apic_write_around(APIC_LVTT, v & ~APIC_LVT_MASKED);
1170 }
1171} 1120}
1121early_param("lapic", parse_lapic);
1172 1122
1173void switch_APIC_timer_to_ipi(void *cpumask) 1123static int __init parse_nolapic(char *arg)
1174{ 1124{
1175 cpumask_t mask = *(cpumask_t *)cpumask; 1125 enable_local_apic = -1;
1176 int cpu = smp_processor_id(); 1126 clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability);
1177 1127 return 0;
1178 if (cpu_isset(cpu, mask) &&
1179 !cpu_isset(cpu, timer_bcast_ipi)) {
1180 disable_APIC_timer();
1181 cpu_set(cpu, timer_bcast_ipi);
1182 }
1183} 1128}
1184EXPORT_SYMBOL(switch_APIC_timer_to_ipi); 1129early_param("nolapic", parse_nolapic);
1185 1130
1186void switch_ipi_to_APIC_timer(void *cpumask) 1131static int __init apic_set_verbosity(char *str)
1187{ 1132{
1188 cpumask_t mask = *(cpumask_t *)cpumask; 1133 if (strcmp("debug", str) == 0)
1189 int cpu = smp_processor_id(); 1134 apic_verbosity = APIC_DEBUG;
1190 1135 else if (strcmp("verbose", str) == 0)
1191 if (cpu_isset(cpu, mask) && 1136 apic_verbosity = APIC_VERBOSE;
1192 cpu_isset(cpu, timer_bcast_ipi)) { 1137 return 1;
1193 cpu_clear(cpu, timer_bcast_ipi);
1194 enable_APIC_timer();
1195 }
1196} 1138}
1197EXPORT_SYMBOL(switch_ipi_to_APIC_timer);
1198 1139
1199#undef APIC_DIVISOR 1140__setup("apic=", apic_set_verbosity);
1200
1201/*
1202 * Local timer interrupt handler. It does both profiling and
1203 * process statistics/rescheduling.
1204 *
1205 * We do profiling in every local tick, statistics/rescheduling
1206 * happen only every 'profiling multiplier' ticks. The default
1207 * multiplier is 1 and it can be changed by writing the new multiplier
1208 * value into /proc/profile.
1209 */
1210
1211inline void smp_local_timer_interrupt(void)
1212{
1213 profile_tick(CPU_PROFILING);
1214#ifdef CONFIG_SMP
1215 update_process_times(user_mode_vm(get_irq_regs()));
1216#endif
1217 1141
1218 /*
1219 * We take the 'long' return path, and there every subsystem
1220 * grabs the apropriate locks (kernel lock/ irq lock).
1221 *
1222 * we might want to decouple profiling from the 'long path',
1223 * and do the profiling totally in assembly.
1224 *
1225 * Currently this isn't too much of an issue (performance wise),
1226 * we can take more than 100K local irqs per second on a 100 MHz P5.
1227 */
1228}
1229 1142
1230/* 1143/*
1231 * Local APIC timer interrupt. This is the most natural way for doing 1144 * Local APIC interrupts
1232 * local interrupts, but local timer interrupts can be emulated by
1233 * broadcast interrupts too. [in case the hw doesn't support APIC timers]
1234 *
1235 * [ if a single-CPU system runs an SMP kernel then we call the local
1236 * interrupt as well. Thus we cannot inline the local irq ... ]
1237 */ 1145 */
1238 1146
1239fastcall void smp_apic_timer_interrupt(struct pt_regs *regs)
1240{
1241 struct pt_regs *old_regs = set_irq_regs(regs);
1242 int cpu = smp_processor_id();
1243
1244 /*
1245 * the NMI deadlock-detector uses this.
1246 */
1247 per_cpu(irq_stat, cpu).apic_timer_irqs++;
1248
1249 /*
1250 * NOTE! We'd better ACK the irq immediately,
1251 * because timer handling can be slow.
1252 */
1253 ack_APIC_irq();
1254 /*
1255 * update_process_times() expects us to have done irq_enter().
1256 * Besides, if we don't timer interrupts ignore the global
1257 * interrupt lock, which is the WrongThing (tm) to do.
1258 */
1259 exit_idle();
1260 irq_enter();
1261 smp_local_timer_interrupt();
1262 irq_exit();
1263 set_irq_regs(old_regs);
1264}
1265
1266#ifndef CONFIG_SMP
1267static void up_apic_timer_interrupt_call(void)
1268{
1269 int cpu = smp_processor_id();
1270
1271 /*
1272 * the NMI deadlock-detector uses this.
1273 */
1274 per_cpu(irq_stat, cpu).apic_timer_irqs++;
1275
1276 smp_local_timer_interrupt();
1277}
1278#endif
1279
1280void smp_send_timer_broadcast_ipi(void)
1281{
1282 cpumask_t mask;
1283
1284 cpus_and(mask, cpu_online_map, timer_bcast_ipi);
1285 if (!cpus_empty(mask)) {
1286#ifdef CONFIG_SMP
1287 send_IPI_mask(mask, LOCAL_TIMER_VECTOR);
1288#else
1289 /*
1290 * We can directly call the apic timer interrupt handler
1291 * in UP case. Minus all irq related functions
1292 */
1293 up_apic_timer_interrupt_call();
1294#endif
1295 }
1296}
1297
1298int setup_profiling_timer(unsigned int multiplier)
1299{
1300 return -EINVAL;
1301}
1302
1303/* 1147/*
1304 * This interrupt should _never_ happen with our APIC/SMP architecture 1148 * This interrupt should _never_ happen with our APIC/SMP architecture
1305 */ 1149 */
@@ -1319,15 +1163,14 @@ fastcall void smp_spurious_interrupt(struct pt_regs *regs)
1319 ack_APIC_irq(); 1163 ack_APIC_irq();
1320 1164
1321 /* see sw-dev-man vol 3, chapter 7.4.13.5 */ 1165 /* see sw-dev-man vol 3, chapter 7.4.13.5 */
1322 printk(KERN_INFO "spurious APIC interrupt on CPU#%d, should never happen.\n", 1166 printk(KERN_INFO "spurious APIC interrupt on CPU#%d, "
1323 smp_processor_id()); 1167 "should never happen.\n", smp_processor_id());
1324 irq_exit(); 1168 irq_exit();
1325} 1169}
1326 1170
1327/* 1171/*
1328 * This interrupt should never happen with our APIC/SMP architecture 1172 * This interrupt should never happen with our APIC/SMP architecture
1329 */ 1173 */
1330
1331fastcall void smp_error_interrupt(struct pt_regs *regs) 1174fastcall void smp_error_interrupt(struct pt_regs *regs)
1332{ 1175{
1333 unsigned long v, v1; 1176 unsigned long v, v1;
@@ -1352,69 +1195,261 @@ fastcall void smp_error_interrupt(struct pt_regs *regs)
1352 7: Illegal register address 1195 7: Illegal register address
1353 */ 1196 */
1354 printk (KERN_DEBUG "APIC error on CPU%d: %02lx(%02lx)\n", 1197 printk (KERN_DEBUG "APIC error on CPU%d: %02lx(%02lx)\n",
1355 smp_processor_id(), v , v1); 1198 smp_processor_id(), v , v1);
1356 irq_exit(); 1199 irq_exit();
1357} 1200}
1358 1201
1359/* 1202/*
1360 * This initializes the IO-APIC and APIC hardware if this is 1203 * Initialize APIC interrupts
1361 * a UP kernel.
1362 */ 1204 */
1363int __init APIC_init_uniprocessor (void) 1205void __init apic_intr_init(void)
1364{ 1206{
1365 if (enable_local_apic < 0) 1207#ifdef CONFIG_SMP
1366 clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability); 1208 smp_intr_init();
1209#endif
1210 /* self generated IPI for local APIC timer */
1211 set_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt);
1367 1212
1368 if (!smp_found_config && !cpu_has_apic) 1213 /* IPI vectors for APIC spurious and error interrupts */
1369 return -1; 1214 set_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt);
1215 set_intr_gate(ERROR_APIC_VECTOR, error_interrupt);
1370 1216
1371 /* 1217 /* thermal monitor LVT interrupt */
1372 * Complain if the BIOS pretends there is one. 1218#ifdef CONFIG_X86_MCE_P4THERMAL
1373 */ 1219 set_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
1374 if (!cpu_has_apic && APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid])) { 1220#endif
1375 printk(KERN_ERR "BIOS bug, local APIC #%d not detected!...\n", 1221}
1376 boot_cpu_physical_apicid); 1222
1377 clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability); 1223/**
1378 return -1; 1224 * connect_bsp_APIC - attach the APIC to the interrupt system
1225 */
1226void __init connect_bsp_APIC(void)
1227{
1228 if (pic_mode) {
1229 /*
1230 * Do not trust the local APIC being empty at bootup.
1231 */
1232 clear_local_APIC();
1233 /*
1234 * PIC mode, enable APIC mode in the IMCR, i.e. connect BSP's
1235 * local APIC to INT and NMI lines.
1236 */
1237 apic_printk(APIC_VERBOSE, "leaving PIC mode, "
1238 "enabling APIC mode.\n");
1239 outb(0x70, 0x22);
1240 outb(0x01, 0x23);
1379 } 1241 }
1242 enable_apic_mode();
1243}
1380 1244
1381 verify_local_APIC(); 1245/**
1246 * disconnect_bsp_APIC - detach the APIC from the interrupt system
1247 * @virt_wire_setup: indicates, whether virtual wire mode is selected
1248 *
1249 * Virtual wire mode is necessary to deliver legacy interrupts even when the
1250 * APIC is disabled.
1251 */
1252void disconnect_bsp_APIC(int virt_wire_setup)
1253{
1254 if (pic_mode) {
1255 /*
1256 * Put the board back into PIC mode (has an effect only on
1257 * certain older boards). Note that APIC interrupts, including
1258 * IPIs, won't work beyond this point! The only exception are
1259 * INIT IPIs.
1260 */
1261 apic_printk(APIC_VERBOSE, "disabling APIC mode, "
1262 "entering PIC mode.\n");
1263 outb(0x70, 0x22);
1264 outb(0x00, 0x23);
1265 } else {
1266 /* Go back to Virtual Wire compatibility mode */
1267 unsigned long value;
1382 1268
1383 connect_bsp_APIC(); 1269 /* For the spurious interrupt use vector F, and enable it */
1270 value = apic_read(APIC_SPIV);
1271 value &= ~APIC_VECTOR_MASK;
1272 value |= APIC_SPIV_APIC_ENABLED;
1273 value |= 0xf;
1274 apic_write_around(APIC_SPIV, value);
1384 1275
1385 /* 1276 if (!virt_wire_setup) {
1386 * Hack: In case of kdump, after a crash, kernel might be booting 1277 /*
1387 * on a cpu with non-zero lapic id. But boot_cpu_physical_apicid 1278 * For LVT0 make it edge triggered, active high,
1388 * might be zero if read from MP tables. Get it from LAPIC. 1279 * external and enabled
1389 */ 1280 */
1390#ifdef CONFIG_CRASH_DUMP 1281 value = apic_read(APIC_LVT0);
1391 boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID)); 1282 value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING |
1392#endif 1283 APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR |
1393 phys_cpu_present_map = physid_mask_of_physid(boot_cpu_physical_apicid); 1284 APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED );
1285 value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING;
1286 value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_EXTINT);
1287 apic_write_around(APIC_LVT0, value);
1288 } else {
1289 /* Disable LVT0 */
1290 apic_write_around(APIC_LVT0, APIC_LVT_MASKED);
1291 }
1394 1292
1395 setup_local_APIC(); 1293 /*
1294 * For LVT1 make it edge triggered, active high, nmi and
1295 * enabled
1296 */
1297 value = apic_read(APIC_LVT1);
1298 value &= ~(
1299 APIC_MODE_MASK | APIC_SEND_PENDING |
1300 APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR |
1301 APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED);
1302 value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING;
1303 value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_NMI);
1304 apic_write_around(APIC_LVT1, value);
1305 }
1306}
1396 1307
1397#ifdef CONFIG_X86_IO_APIC 1308/*
1398 if (smp_found_config) 1309 * Power management
1399 if (!skip_ioapic_setup && nr_ioapics) 1310 */
1400 setup_IO_APIC(); 1311#ifdef CONFIG_PM
1312
1313static struct {
1314 int active;
1315 /* r/w apic fields */
1316 unsigned int apic_id;
1317 unsigned int apic_taskpri;
1318 unsigned int apic_ldr;
1319 unsigned int apic_dfr;
1320 unsigned int apic_spiv;
1321 unsigned int apic_lvtt;
1322 unsigned int apic_lvtpc;
1323 unsigned int apic_lvt0;
1324 unsigned int apic_lvt1;
1325 unsigned int apic_lvterr;
1326 unsigned int apic_tmict;
1327 unsigned int apic_tdcr;
1328 unsigned int apic_thmr;
1329} apic_pm_state;
1330
1331static int lapic_suspend(struct sys_device *dev, pm_message_t state)
1332{
1333 unsigned long flags;
1334 int maxlvt;
1335
1336 if (!apic_pm_state.active)
1337 return 0;
1338
1339 maxlvt = lapic_get_maxlvt();
1340
1341 apic_pm_state.apic_id = apic_read(APIC_ID);
1342 apic_pm_state.apic_taskpri = apic_read(APIC_TASKPRI);
1343 apic_pm_state.apic_ldr = apic_read(APIC_LDR);
1344 apic_pm_state.apic_dfr = apic_read(APIC_DFR);
1345 apic_pm_state.apic_spiv = apic_read(APIC_SPIV);
1346 apic_pm_state.apic_lvtt = apic_read(APIC_LVTT);
1347 if (maxlvt >= 4)
1348 apic_pm_state.apic_lvtpc = apic_read(APIC_LVTPC);
1349 apic_pm_state.apic_lvt0 = apic_read(APIC_LVT0);
1350 apic_pm_state.apic_lvt1 = apic_read(APIC_LVT1);
1351 apic_pm_state.apic_lvterr = apic_read(APIC_LVTERR);
1352 apic_pm_state.apic_tmict = apic_read(APIC_TMICT);
1353 apic_pm_state.apic_tdcr = apic_read(APIC_TDCR);
1354#ifdef CONFIG_X86_MCE_P4THERMAL
1355 if (maxlvt >= 5)
1356 apic_pm_state.apic_thmr = apic_read(APIC_LVTTHMR);
1401#endif 1357#endif
1402 setup_boot_clock();
1403 1358
1359 local_irq_save(flags);
1360 disable_local_APIC();
1361 local_irq_restore(flags);
1404 return 0; 1362 return 0;
1405} 1363}
1406 1364
1407static int __init parse_lapic(char *arg) 1365static int lapic_resume(struct sys_device *dev)
1408{ 1366{
1409 lapic_enable(); 1367 unsigned int l, h;
1368 unsigned long flags;
1369 int maxlvt;
1370
1371 if (!apic_pm_state.active)
1372 return 0;
1373
1374 maxlvt = lapic_get_maxlvt();
1375
1376 local_irq_save(flags);
1377
1378 /*
1379 * Make sure the APICBASE points to the right address
1380 *
1381 * FIXME! This will be wrong if we ever support suspend on
1382 * SMP! We'll need to do this as part of the CPU restore!
1383 */
1384 rdmsr(MSR_IA32_APICBASE, l, h);
1385 l &= ~MSR_IA32_APICBASE_BASE;
1386 l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr;
1387 wrmsr(MSR_IA32_APICBASE, l, h);
1388
1389 apic_write(APIC_LVTERR, ERROR_APIC_VECTOR | APIC_LVT_MASKED);
1390 apic_write(APIC_ID, apic_pm_state.apic_id);
1391 apic_write(APIC_DFR, apic_pm_state.apic_dfr);
1392 apic_write(APIC_LDR, apic_pm_state.apic_ldr);
1393 apic_write(APIC_TASKPRI, apic_pm_state.apic_taskpri);
1394 apic_write(APIC_SPIV, apic_pm_state.apic_spiv);
1395 apic_write(APIC_LVT0, apic_pm_state.apic_lvt0);
1396 apic_write(APIC_LVT1, apic_pm_state.apic_lvt1);
1397#ifdef CONFIG_X86_MCE_P4THERMAL
1398 if (maxlvt >= 5)
1399 apic_write(APIC_LVTTHMR, apic_pm_state.apic_thmr);
1400#endif
1401 if (maxlvt >= 4)
1402 apic_write(APIC_LVTPC, apic_pm_state.apic_lvtpc);
1403 apic_write(APIC_LVTT, apic_pm_state.apic_lvtt);
1404 apic_write(APIC_TDCR, apic_pm_state.apic_tdcr);
1405 apic_write(APIC_TMICT, apic_pm_state.apic_tmict);
1406 apic_write(APIC_ESR, 0);
1407 apic_read(APIC_ESR);
1408 apic_write(APIC_LVTERR, apic_pm_state.apic_lvterr);
1409 apic_write(APIC_ESR, 0);
1410 apic_read(APIC_ESR);
1411 local_irq_restore(flags);
1410 return 0; 1412 return 0;
1411} 1413}
1412early_param("lapic", parse_lapic);
1413 1414
1414static int __init parse_nolapic(char *arg) 1415/*
1416 * This device has no shutdown method - fully functioning local APICs
1417 * are needed on every CPU up until machine_halt/restart/poweroff.
1418 */
1419
1420static struct sysdev_class lapic_sysclass = {
1421 set_kset_name("lapic"),
1422 .resume = lapic_resume,
1423 .suspend = lapic_suspend,
1424};
1425
1426static struct sys_device device_lapic = {
1427 .id = 0,
1428 .cls = &lapic_sysclass,
1429};
1430
1431static void __devinit apic_pm_activate(void)
1415{ 1432{
1416 lapic_disable(); 1433 apic_pm_state.active = 1;
1417 return 0;
1418} 1434}
1419early_param("nolapic", parse_nolapic);
1420 1435
1436static int __init init_lapic_sysfs(void)
1437{
1438 int error;
1439
1440 if (!cpu_has_apic)
1441 return 0;
1442 /* XXX: remove suspend/resume procs if !apic_pm_state.active? */
1443
1444 error = sysdev_class_register(&lapic_sysclass);
1445 if (!error)
1446 error = sysdev_register(&device_lapic);
1447 return error;
1448}
1449device_initcall(init_lapic_sysfs);
1450
1451#else /* CONFIG_PM */
1452
1453static void apic_pm_activate(void) { }
1454
1455#endif /* CONFIG_PM */
diff --git a/arch/i386/kernel/io_apic.c b/arch/i386/kernel/io_apic.c
index c76be1110922..f003a4ce0a93 100644
--- a/arch/i386/kernel/io_apic.c
+++ b/arch/i386/kernel/io_apic.c
@@ -1588,7 +1588,7 @@ void /*__init*/ print_local_APIC(void * dummy)
1588 v = apic_read(APIC_LVR); 1588 v = apic_read(APIC_LVR);
1589 printk(KERN_INFO "... APIC VERSION: %08x\n", v); 1589 printk(KERN_INFO "... APIC VERSION: %08x\n", v);
1590 ver = GET_APIC_VERSION(v); 1590 ver = GET_APIC_VERSION(v);
1591 maxlvt = get_maxlvt(); 1591 maxlvt = lapic_get_maxlvt();
1592 1592
1593 v = apic_read(APIC_TASKPRI); 1593 v = apic_read(APIC_TASKPRI);
1594 printk(KERN_DEBUG "... APIC TASKPRI: %08x (%02x)\n", v, v & APIC_TPRI_MASK); 1594 printk(KERN_DEBUG "... APIC TASKPRI: %08x (%02x)\n", v, v & APIC_TPRI_MASK);
diff --git a/arch/i386/kernel/irq.c b/arch/i386/kernel/irq.c
index 5785d84103a6..0f2ca590bf23 100644
--- a/arch/i386/kernel/irq.c
+++ b/arch/i386/kernel/irq.c
@@ -10,7 +10,6 @@
10 * io_apic.c.) 10 * io_apic.c.)
11 */ 11 */
12 12
13#include <asm/uaccess.h>
14#include <linux/module.h> 13#include <linux/module.h>
15#include <linux/seq_file.h> 14#include <linux/seq_file.h>
16#include <linux/interrupt.h> 15#include <linux/interrupt.h>
@@ -21,19 +20,34 @@
21 20
22#include <asm/idle.h> 21#include <asm/idle.h>
23 22
23#include <asm/apic.h>
24#include <asm/uaccess.h>
25
24DEFINE_PER_CPU(irq_cpustat_t, irq_stat) ____cacheline_internodealigned_in_smp; 26DEFINE_PER_CPU(irq_cpustat_t, irq_stat) ____cacheline_internodealigned_in_smp;
25EXPORT_PER_CPU_SYMBOL(irq_stat); 27EXPORT_PER_CPU_SYMBOL(irq_stat);
26 28
27#ifndef CONFIG_X86_LOCAL_APIC
28/* 29/*
29 * 'what should we do if we get a hw irq event on an illegal vector'. 30 * 'what should we do if we get a hw irq event on an illegal vector'.
30 * each architecture has to answer this themselves. 31 * each architecture has to answer this themselves.
31 */ 32 */
32void ack_bad_irq(unsigned int irq) 33void ack_bad_irq(unsigned int irq)
33{ 34{
34 printk("unexpected IRQ trap at vector %02x\n", irq); 35 printk(KERN_ERR "unexpected IRQ trap at vector %02x\n", irq);
35} 36
37#ifdef CONFIG_X86_LOCAL_APIC
38 /*
39 * Currently unexpected vectors happen only on SMP and APIC.
40 * We _must_ ack these because every local APIC has only N
41 * irq slots per priority level, and a 'hanging, unacked' IRQ
42 * holds up an irq slot - in excessive cases (when multiple
43 * unexpected vectors occur) that might lock up the APIC
44 * completely.
45 * But only ack when the APIC is enabled -AK
46 */
47 if (cpu_has_apic)
48 ack_APIC_irq();
36#endif 49#endif
50}
37 51
38#ifdef CONFIG_4KSTACKS 52#ifdef CONFIG_4KSTACKS
39/* 53/*
diff --git a/arch/i386/kernel/smpboot.c b/arch/i386/kernel/smpboot.c
index 6ddffe8aabb2..6cdd941fc2f2 100644
--- a/arch/i386/kernel/smpboot.c
+++ b/arch/i386/kernel/smpboot.c
@@ -600,7 +600,7 @@ wakeup_secondary_cpu(int logical_apicid, unsigned long start_eip)
600 /* 600 /*
601 * Due to the Pentium erratum 3AP. 601 * Due to the Pentium erratum 3AP.
602 */ 602 */
603 maxlvt = get_maxlvt(); 603 maxlvt = lapic_get_maxlvt();
604 if (maxlvt > 3) { 604 if (maxlvt > 3) {
605 apic_read_around(APIC_SPIV); 605 apic_read_around(APIC_SPIV);
606 apic_write(APIC_ESR, 0); 606 apic_write(APIC_ESR, 0);
@@ -697,7 +697,7 @@ wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip)
697 */ 697 */
698 Dprintk("#startup loops: %d.\n", num_starts); 698 Dprintk("#startup loops: %d.\n", num_starts);
699 699
700 maxlvt = get_maxlvt(); 700 maxlvt = lapic_get_maxlvt();
701 701
702 for (j = 1; j <= num_starts; j++) { 702 for (j = 1; j <= num_starts; j++) {
703 Dprintk("Sending STARTUP #%d.\n",j); 703 Dprintk("Sending STARTUP #%d.\n",j);
diff --git a/include/asm-i386/apic.h b/include/asm-i386/apic.h
index 3a61206fd108..ccf64fa7b935 100644
--- a/include/asm-i386/apic.h
+++ b/include/asm-i386/apic.h
@@ -97,7 +97,7 @@ static inline void ack_APIC_irq(void)
97 97
98extern void (*wait_timer_tick)(void); 98extern void (*wait_timer_tick)(void);
99 99
100extern int get_maxlvt(void); 100extern int lapic_get_maxlvt(void);
101extern void clear_local_APIC(void); 101extern void clear_local_APIC(void);
102extern void connect_bsp_APIC (void); 102extern void connect_bsp_APIC (void);
103extern void disconnect_bsp_APIC (int virt_wire_setup); 103extern void disconnect_bsp_APIC (int virt_wire_setup);