4 files changed, 60 insertions, 33 deletions

diff --git a/MAINTAINERS b/MAINTAINERS
index c385456caaf0..16129e67678a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2562,8 +2562,7 @@ S:	Maintained
 F:      Documentation/i2c/
 F:      drivers/i2c/
 F:      include/linux/i2c.h
-F:      include/linux/i2c-dev.h
-F:      include/linux/i2c-id.h
+F:      include/linux/i2c-*.h
 
 I2C-TINY-USB DRIVER
 M:      Till Harbaum <till@harbaum.org>
diff --git a/drivers/i2c/chips/tsl2550.c b/drivers/i2c/chips/tsl2550.c
index aa96bd2d27ea..a0702f36a72f 100644
--- a/drivers/i2c/chips/tsl2550.c
+++ b/drivers/i2c/chips/tsl2550.c
@@ -257,6 +257,7 @@ static DEVICE_ATTR(operating_mode, S_IWUSR | S_IRUGO,
 
 static ssize_t __tsl2550_show_lux(struct i2c_client *client, char *buf)
 {
+        struct tsl2550_data *data = i2c_get_clientdata(client);
         u8 ch0, ch1;
         int ret;
 
@@ -274,6 +275,8 @@ static ssize_t __tsl2550_show_lux(struct i2c_client *client, char *buf)
         ret = tsl2550_calculate_lux(ch0, ch1);
         if (ret < 0)
                 return ret;
+        if (data->operating_mode == 1)
+                ret *= 5;
 
         return sprintf(buf, "%d\n", ret);
 }
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 8d80fceca6a4..296504355142 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -762,6 +762,7 @@ int i2c_del_adapter(struct i2c_adapter *adap)
 {
         int res = 0;
         struct i2c_adapter *found;
+        struct i2c_client *client, *next;
 
         /* First make sure that this adapter was ever added */
         mutex_lock(&core_lock);
@@ -781,6 +782,16 @@ int i2c_del_adapter(struct i2c_adapter *adap)
         if (res)
                 return res;
 
+        /* Remove devices instantiated from sysfs */
+        list_for_each_entry_safe(client, next, &userspace_devices, detected) {
+                if (client->adapter == adap) {
+                        dev_dbg(&adap->dev, "Removing %s at 0x%x\n",
+                                client->name, client->addr);
+                        list_del(&client->detected);
+                        i2c_unregister_device(client);
+                }
+        }
+
         /* Detach any active clients. This can't fail, thus we do not
            checking the returned value. */
         res = device_for_each_child(&adap->dev, NULL, __unregister_client);
diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c
index db39f4a52f53..2cb2736d65aa 100644
--- a/drivers/misc/eeprom/at24.c
+++ b/drivers/misc/eeprom/at24.c
@@ -158,6 +158,7 @@ static ssize_t at24_eeprom_read(struct at24_data *at24, char *buf,
         struct i2c_msg msg[2];
         u8 msgbuf[2];
         struct i2c_client *client;
+        unsigned long timeout, read_time;
         int status, i;
 
         memset(msg, 0, sizeof(msg));
@@ -183,47 +184,60 @@ static ssize_t at24_eeprom_read(struct at24_data *at24, char *buf,
         if (count > io_limit)
                 count = io_limit;
 
-        /* Smaller eeproms can work given some SMBus extension calls */
         if (at24->use_smbus) {
+                /* Smaller eeproms can work given some SMBus extension calls */
                 if (count > I2C_SMBUS_BLOCK_MAX)
                         count = I2C_SMBUS_BLOCK_MAX;
-                status = i2c_smbus_read_i2c_block_data(client, offset,
-                                count, buf);
-                dev_dbg(&client->dev, "smbus read %zu@%d --> %d\n",
-                                count, offset, status);
-                return (status < 0) ? -EIO : status;
+        } else {
+                /*
+                 * When we have a better choice than SMBus calls, use a
+                 * combined I2C message. Write address; then read up to
+                 * io_limit data bytes. Note that read page rollover helps us
+                 * here (unlike writes). msgbuf is u8 and will cast to our
+                 * needs.
+                 */
+                i = 0;
+                if (at24->chip.flags & AT24_FLAG_ADDR16)
+                        msgbuf[i++] = offset >> 8;
+                msgbuf[i++] = offset;
+
+                msg[0].addr = client->addr;
+                msg[0].buf = msgbuf;
+                msg[0].len = i;
+
+                msg[1].addr = client->addr;
+                msg[1].flags = I2C_M_RD;
+                msg[1].buf = buf;
+                msg[1].len = count;
         }
 
         /*
-         * When we have a better choice than SMBus calls, use a combined
-         * I2C message. Write address; then read up to io_limit data bytes.
-         * Note that read page rollover helps us here (unlike writes).
-         * msgbuf is u8 and will cast to our needs.
+         * Reads fail if the previous write didn't complete yet. We may
+         * loop a few times until this one succeeds, waiting at least
+         * long enough for one entire page write to work.
          */
-        i = 0;
-        if (at24->chip.flags & AT24_FLAG_ADDR16)
-                msgbuf[i++] = offset >> 8;
-        msgbuf[i++] = offset;
-
-        msg[0].addr = client->addr;
-        msg[0].buf = msgbuf;
-        msg[0].len = i;
+        timeout = jiffies + msecs_to_jiffies(write_timeout);
+        do {
+                read_time = jiffies;
+                if (at24->use_smbus) {
+                        status = i2c_smbus_read_i2c_block_data(client, offset,
+                                        count, buf);
+                } else {
+                        status = i2c_transfer(client->adapter, msg, 2);
+                        if (status == 2)
+                                status = count;
+                }
+                dev_dbg(&client->dev, "read %zu@%d --> %d (%ld)\n",
+                                count, offset, status, jiffies);
 
-        msg[1].addr = client->addr;
-        msg[1].flags = I2C_M_RD;
-        msg[1].buf = buf;
-        msg[1].len = count;
+                if (status == count)
+                        return count;
 
-        status = i2c_transfer(client->adapter, msg, 2);
-        dev_dbg(&client->dev, "i2c read %zu@%d --> %d\n",
-                        count, offset, status);
+                /* REVISIT: at HZ=100, this is sloooow */
+                msleep(1);
+        } while (time_before(read_time, timeout));
 
-        if (status == 2)
-                return count;
-        else if (status >= 0)
-                return -EIO;
-        else
-                return status;
+        return -ETIMEDOUT;
 }
 
 static ssize_t at24_read(struct at24_data *at24,