diff options
74 files changed, 21991 insertions, 247 deletions
diff --git a/Documentation/arm/OMAP/DSS b/Documentation/arm/OMAP/DSS new file mode 100644 index 000000000000..0af0e9eed5d6 --- /dev/null +++ b/Documentation/arm/OMAP/DSS | |||
@@ -0,0 +1,317 @@ | |||
1 | OMAP2/3 Display Subsystem | ||
2 | ------------------------- | ||
3 | |||
4 | This is an almost total rewrite of the OMAP FB driver in drivers/video/omap | ||
5 | (let's call it DSS1). The main differences between DSS1 and DSS2 are DSI, | ||
6 | TV-out and multiple display support, but there are lots of small improvements | ||
7 | also. | ||
8 | |||
9 | The DSS2 driver (omapdss module) is in arch/arm/plat-omap/dss/, and the FB, | ||
10 | panel and controller drivers are in drivers/video/omap2/. DSS1 and DSS2 live | ||
11 | currently side by side, you can choose which one to use. | ||
12 | |||
13 | Features | ||
14 | -------- | ||
15 | |||
16 | Working and tested features include: | ||
17 | |||
18 | - MIPI DPI (parallel) output | ||
19 | - MIPI DSI output in command mode | ||
20 | - MIPI DBI (RFBI) output | ||
21 | - SDI output | ||
22 | - TV output | ||
23 | - All pieces can be compiled as a module or inside kernel | ||
24 | - Use DISPC to update any of the outputs | ||
25 | - Use CPU to update RFBI or DSI output | ||
26 | - OMAP DISPC planes | ||
27 | - RGB16, RGB24 packed, RGB24 unpacked | ||
28 | - YUV2, UYVY | ||
29 | - Scaling | ||
30 | - Adjusting DSS FCK to find a good pixel clock | ||
31 | - Use DSI DPLL to create DSS FCK | ||
32 | |||
33 | Tested boards include: | ||
34 | - OMAP3 SDP board | ||
35 | - Beagle board | ||
36 | - N810 | ||
37 | |||
38 | omapdss driver | ||
39 | -------------- | ||
40 | |||
41 | The DSS driver does not itself have any support for Linux framebuffer, V4L or | ||
42 | such like the current ones, but it has an internal kernel API that upper level | ||
43 | drivers can use. | ||
44 | |||
45 | The DSS driver models OMAP's overlays, overlay managers and displays in a | ||
46 | flexible way to enable non-common multi-display configuration. In addition to | ||
47 | modelling the hardware overlays, omapdss supports virtual overlays and overlay | ||
48 | managers. These can be used when updating a display with CPU or system DMA. | ||
49 | |||
50 | Panel and controller drivers | ||
51 | ---------------------------- | ||
52 | |||
53 | The drivers implement panel or controller specific functionality and are not | ||
54 | usually visible to users except through omapfb driver. They register | ||
55 | themselves to the DSS driver. | ||
56 | |||
57 | omapfb driver | ||
58 | ------------- | ||
59 | |||
60 | The omapfb driver implements arbitrary number of standard linux framebuffers. | ||
61 | These framebuffers can be routed flexibly to any overlays, thus allowing very | ||
62 | dynamic display architecture. | ||
63 | |||
64 | The driver exports some omapfb specific ioctls, which are compatible with the | ||
65 | ioctls in the old driver. | ||
66 | |||
67 | The rest of the non standard features are exported via sysfs. Whether the final | ||
68 | implementation will use sysfs, or ioctls, is still open. | ||
69 | |||
70 | V4L2 drivers | ||
71 | ------------ | ||
72 | |||
73 | V4L2 is being implemented in TI. | ||
74 | |||
75 | From omapdss point of view the V4L2 drivers should be similar to framebuffer | ||
76 | driver. | ||
77 | |||
78 | Architecture | ||
79 | -------------------- | ||
80 | |||
81 | Some clarification what the different components do: | ||
82 | |||
83 | - Framebuffer is a memory area inside OMAP's SRAM/SDRAM that contains the | ||
84 | pixel data for the image. Framebuffer has width and height and color | ||
85 | depth. | ||
86 | - Overlay defines where the pixels are read from and where they go on the | ||
87 | screen. The overlay may be smaller than framebuffer, thus displaying only | ||
88 | part of the framebuffer. The position of the overlay may be changed if | ||
89 | the overlay is smaller than the display. | ||
90 | - Overlay manager combines the overlays in to one image and feeds them to | ||
91 | display. | ||
92 | - Display is the actual physical display device. | ||
93 | |||
94 | A framebuffer can be connected to multiple overlays to show the same pixel data | ||
95 | on all of the overlays. Note that in this case the overlay input sizes must be | ||
96 | the same, but, in case of video overlays, the output size can be different. Any | ||
97 | framebuffer can be connected to any overlay. | ||
98 | |||
99 | An overlay can be connected to one overlay manager. Also DISPC overlays can be | ||
100 | connected only to DISPC overlay managers, and virtual overlays can be only | ||
101 | connected to virtual overlays. | ||
102 | |||
103 | An overlay manager can be connected to one display. There are certain | ||
104 | restrictions which kinds of displays an overlay manager can be connected: | ||
105 | |||
106 | - DISPC TV overlay manager can be only connected to TV display. | ||
107 | - Virtual overlay managers can only be connected to DBI or DSI displays. | ||
108 | - DISPC LCD overlay manager can be connected to all displays, except TV | ||
109 | display. | ||
110 | |||
111 | Sysfs | ||
112 | ----- | ||
113 | The sysfs interface is mainly used for testing. I don't think sysfs | ||
114 | interface is the best for this in the final version, but I don't quite know | ||
115 | what would be the best interfaces for these things. | ||
116 | |||
117 | The sysfs interface is divided to two parts: DSS and FB. | ||
118 | |||
119 | /sys/class/graphics/fb? directory: | ||
120 | mirror 0=off, 1=on | ||
121 | rotate Rotation 0-3 for 0, 90, 180, 270 degrees | ||
122 | rotate_type 0 = DMA rotation, 1 = VRFB rotation | ||
123 | overlays List of overlay numbers to which framebuffer pixels go | ||
124 | phys_addr Physical address of the framebuffer | ||
125 | virt_addr Virtual address of the framebuffer | ||
126 | size Size of the framebuffer | ||
127 | |||
128 | /sys/devices/platform/omapdss/overlay? directory: | ||
129 | enabled 0=off, 1=on | ||
130 | input_size width,height (ie. the framebuffer size) | ||
131 | manager Destination overlay manager name | ||
132 | name | ||
133 | output_size width,height | ||
134 | position x,y | ||
135 | screen_width width | ||
136 | global_alpha global alpha 0-255 0=transparent 255=opaque | ||
137 | |||
138 | /sys/devices/platform/omapdss/manager? directory: | ||
139 | display Destination display | ||
140 | name | ||
141 | alpha_blending_enabled 0=off, 1=on | ||
142 | trans_key_enabled 0=off, 1=on | ||
143 | trans_key_type gfx-destination, video-source | ||
144 | trans_key_value transparency color key (RGB24) | ||
145 | default_color default background color (RGB24) | ||
146 | |||
147 | /sys/devices/platform/omapdss/display? directory: | ||
148 | ctrl_name Controller name | ||
149 | mirror 0=off, 1=on | ||
150 | update_mode 0=off, 1=auto, 2=manual | ||
151 | enabled 0=off, 1=on | ||
152 | name | ||
153 | rotate Rotation 0-3 for 0, 90, 180, 270 degrees | ||
154 | timings Display timings (pixclock,xres/hfp/hbp/hsw,yres/vfp/vbp/vsw) | ||
155 | When writing, two special timings are accepted for tv-out: | ||
156 | "pal" and "ntsc" | ||
157 | panel_name | ||
158 | tear_elim Tearing elimination 0=off, 1=on | ||
159 | |||
160 | There are also some debugfs files at <debugfs>/omapdss/ which show information | ||
161 | about clocks and registers. | ||
162 | |||
163 | Examples | ||
164 | -------- | ||
165 | |||
166 | The following definitions have been made for the examples below: | ||
167 | |||
168 | ovl0=/sys/devices/platform/omapdss/overlay0 | ||
169 | ovl1=/sys/devices/platform/omapdss/overlay1 | ||
170 | ovl2=/sys/devices/platform/omapdss/overlay2 | ||
171 | |||
172 | mgr0=/sys/devices/platform/omapdss/manager0 | ||
173 | mgr1=/sys/devices/platform/omapdss/manager1 | ||
174 | |||
175 | lcd=/sys/devices/platform/omapdss/display0 | ||
176 | dvi=/sys/devices/platform/omapdss/display1 | ||
177 | tv=/sys/devices/platform/omapdss/display2 | ||
178 | |||
179 | fb0=/sys/class/graphics/fb0 | ||
180 | fb1=/sys/class/graphics/fb1 | ||
181 | fb2=/sys/class/graphics/fb2 | ||
182 | |||
183 | Default setup on OMAP3 SDP | ||
184 | -------------------------- | ||
185 | |||
186 | Here's the default setup on OMAP3 SDP board. All planes go to LCD. DVI | ||
187 | and TV-out are not in use. The columns from left to right are: | ||
188 | framebuffers, overlays, overlay managers, displays. Framebuffers are | ||
189 | handled by omapfb, and the rest by the DSS. | ||
190 | |||
191 | FB0 --- GFX -\ DVI | ||
192 | FB1 --- VID1 --+- LCD ---- LCD | ||
193 | FB2 --- VID2 -/ TV ----- TV | ||
194 | |||
195 | Example: Switch from LCD to DVI | ||
196 | ---------------------- | ||
197 | |||
198 | w=`cat $dvi/timings | cut -d "," -f 2 | cut -d "/" -f 1` | ||
199 | h=`cat $dvi/timings | cut -d "," -f 3 | cut -d "/" -f 1` | ||
200 | |||
201 | echo "0" > $lcd/enabled | ||
202 | echo "" > $mgr0/display | ||
203 | fbset -fb /dev/fb0 -xres $w -yres $h -vxres $w -vyres $h | ||
204 | # at this point you have to switch the dvi/lcd dip-switch from the omap board | ||
205 | echo "dvi" > $mgr0/display | ||
206 | echo "1" > $dvi/enabled | ||
207 | |||
208 | After this the configuration looks like: | ||
209 | |||
210 | FB0 --- GFX -\ -- DVI | ||
211 | FB1 --- VID1 --+- LCD -/ LCD | ||
212 | FB2 --- VID2 -/ TV ----- TV | ||
213 | |||
214 | Example: Clone GFX overlay to LCD and TV | ||
215 | ------------------------------- | ||
216 | |||
217 | w=`cat $tv/timings | cut -d "," -f 2 | cut -d "/" -f 1` | ||
218 | h=`cat $tv/timings | cut -d "," -f 3 | cut -d "/" -f 1` | ||
219 | |||
220 | echo "0" > $ovl0/enabled | ||
221 | echo "0" > $ovl1/enabled | ||
222 | |||
223 | echo "" > $fb1/overlays | ||
224 | echo "0,1" > $fb0/overlays | ||
225 | |||
226 | echo "$w,$h" > $ovl1/output_size | ||
227 | echo "tv" > $ovl1/manager | ||
228 | |||
229 | echo "1" > $ovl0/enabled | ||
230 | echo "1" > $ovl1/enabled | ||
231 | |||
232 | echo "1" > $tv/enabled | ||
233 | |||
234 | After this the configuration looks like (only relevant parts shown): | ||
235 | |||
236 | FB0 +-- GFX ---- LCD ---- LCD | ||
237 | \- VID1 ---- TV ---- TV | ||
238 | |||
239 | Misc notes | ||
240 | ---------- | ||
241 | |||
242 | OMAP FB allocates the framebuffer memory using the OMAP VRAM allocator. | ||
243 | |||
244 | Using DSI DPLL to generate pixel clock it is possible produce the pixel clock | ||
245 | of 86.5MHz (max possible), and with that you get 1280x1024@57 output from DVI. | ||
246 | |||
247 | Rotation and mirroring currently only supports RGB565 and RGB8888 modes. VRFB | ||
248 | does not support mirroring. | ||
249 | |||
250 | VRFB rotation requires much more memory than non-rotated framebuffer, so you | ||
251 | probably need to increase your vram setting before using VRFB rotation. Also, | ||
252 | many applications may not work with VRFB if they do not pay attention to all | ||
253 | framebuffer parameters. | ||
254 | |||
255 | Kernel boot arguments | ||
256 | --------------------- | ||
257 | |||
258 | vram=<size> | ||
259 | - Amount of total VRAM to preallocate. For example, "10M". omapfb | ||
260 | allocates memory for framebuffers from VRAM. | ||
261 | |||
262 | omapfb.mode=<display>:<mode>[,...] | ||
263 | - Default video mode for specified displays. For example, | ||
264 | "dvi:800x400MR-24@60". See drivers/video/modedb.c. | ||
265 | There are also two special modes: "pal" and "ntsc" that | ||
266 | can be used to tv out. | ||
267 | |||
268 | omapfb.vram=<fbnum>:<size>[@<physaddr>][,...] | ||
269 | - VRAM allocated for a framebuffer. Normally omapfb allocates vram | ||
270 | depending on the display size. With this you can manually allocate | ||
271 | more or define the physical address of each framebuffer. For example, | ||
272 | "1:4M" to allocate 4M for fb1. | ||
273 | |||
274 | omapfb.debug=<y|n> | ||
275 | - Enable debug printing. You have to have OMAPFB debug support enabled | ||
276 | in kernel config. | ||
277 | |||
278 | omapfb.test=<y|n> | ||
279 | - Draw test pattern to framebuffer whenever framebuffer settings change. | ||
280 | You need to have OMAPFB debug support enabled in kernel config. | ||
281 | |||
282 | omapfb.vrfb=<y|n> | ||
283 | - Use VRFB rotation for all framebuffers. | ||
284 | |||
285 | omapfb.rotate=<angle> | ||
286 | - Default rotation applied to all framebuffers. | ||
287 | 0 - 0 degree rotation | ||
288 | 1 - 90 degree rotation | ||
289 | 2 - 180 degree rotation | ||
290 | 3 - 270 degree rotation | ||
291 | |||
292 | omapfb.mirror=<y|n> | ||
293 | - Default mirror for all framebuffers. Only works with DMA rotation. | ||
294 | |||
295 | omapdss.def_disp=<display> | ||
296 | - Name of default display, to which all overlays will be connected. | ||
297 | Common examples are "lcd" or "tv". | ||
298 | |||
299 | omapdss.debug=<y|n> | ||
300 | - Enable debug printing. You have to have DSS debug support enabled in | ||
301 | kernel config. | ||
302 | |||
303 | TODO | ||
304 | ---- | ||
305 | |||
306 | DSS locking | ||
307 | |||
308 | Error checking | ||
309 | - Lots of checks are missing or implemented just as BUG() | ||
310 | |||
311 | System DMA update for DSI | ||
312 | - Can be used for RGB16 and RGB24P modes. Probably not for RGB24U (how | ||
313 | to skip the empty byte?) | ||
314 | |||
315 | OMAP1 support | ||
316 | - Not sure if needed | ||
317 | |||
diff --git a/MAINTAINERS b/MAINTAINERS index d7f8668b7a72..98d5ca10ac04 100644 --- a/MAINTAINERS +++ b/MAINTAINERS | |||
@@ -3903,6 +3903,23 @@ L: linux-omap@vger.kernel.org | |||
3903 | S: Maintained | 3903 | S: Maintained |
3904 | F: drivers/video/omap/ | 3904 | F: drivers/video/omap/ |
3905 | 3905 | ||
3906 | OMAP DISPLAY SUBSYSTEM SUPPORT (DSS2) | ||
3907 | M: Tomi Valkeinen <tomi.valkeinen@nokia.com> | ||
3908 | L: linux-omap@vger.kernel.org | ||
3909 | L: linux-fbdev@vger.kernel.org (moderated for non-subscribers) | ||
3910 | S: Maintained | ||
3911 | F: drivers/video/omap2/dss/ | ||
3912 | F: drivers/video/omap2/vrfb.c | ||
3913 | F: drivers/video/omap2/vram.c | ||
3914 | F: Documentation/arm/OMAP/DSS | ||
3915 | |||
3916 | OMAP FRAMEBUFFER SUPPORT (FOR DSS2) | ||
3917 | M: Tomi Valkeinen <tomi.valkeinen@nokia.com> | ||
3918 | L: linux-omap@vger.kernel.org | ||
3919 | L: linux-fbdev@vger.kernel.org (moderated for non-subscribers) | ||
3920 | S: Maintained | ||
3921 | F: drivers/video/omap2/omapfb/ | ||
3922 | |||
3906 | OMAP MMC SUPPORT | 3923 | OMAP MMC SUPPORT |
3907 | M: Jarkko Lavinen <jarkko.lavinen@nokia.com> | 3924 | M: Jarkko Lavinen <jarkko.lavinen@nokia.com> |
3908 | L: linux-omap@vger.kernel.org | 3925 | L: linux-omap@vger.kernel.org |
diff --git a/arch/arm/configs/omap_3430sdp_defconfig b/arch/arm/configs/omap_3430sdp_defconfig index 84829587d55a..592457cfbbe5 100644 --- a/arch/arm/configs/omap_3430sdp_defconfig +++ b/arch/arm/configs/omap_3430sdp_defconfig | |||
@@ -963,10 +963,32 @@ CONFIG_FB_CFB_IMAGEBLIT=y | |||
963 | # | 963 | # |
964 | # CONFIG_FB_S1D13XXX is not set | 964 | # CONFIG_FB_S1D13XXX is not set |
965 | # CONFIG_FB_VIRTUAL is not set | 965 | # CONFIG_FB_VIRTUAL is not set |
966 | CONFIG_FB_OMAP=y | 966 | # CONFIG_FB_METRONOME is not set |
967 | # CONFIG_FB_OMAP_LCDC_EXTERNAL is not set | 967 | # CONFIG_FB_MB862XX is not set |
968 | # CONFIG_FB_BROADSHEET is not set | ||
969 | # CONFIG_FB_OMAP_LCD_VGA is not set | ||
968 | # CONFIG_FB_OMAP_BOOTLOADER_INIT is not set | 970 | # CONFIG_FB_OMAP_BOOTLOADER_INIT is not set |
969 | CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2 | 971 | CONFIG_OMAP2_VRAM=y |
972 | CONFIG_OMAP2_VRFB=y | ||
973 | CONFIG_OMAP2_DSS=y | ||
974 | CONFIG_OMAP2_VRAM_SIZE=4 | ||
975 | CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y | ||
976 | # CONFIG_OMAP2_DSS_RFBI is not set | ||
977 | CONFIG_OMAP2_DSS_VENC=y | ||
978 | # CONFIG_OMAP2_DSS_SDI is not set | ||
979 | # CONFIG_OMAP2_DSS_DSI is not set | ||
980 | # CONFIG_OMAP2_DSS_FAKE_VSYNC is not set | ||
981 | CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0 | ||
982 | CONFIG_FB_OMAP2=y | ||
983 | CONFIG_FB_OMAP2_DEBUG_SUPPORT=y | ||
984 | # CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set | ||
985 | CONFIG_FB_OMAP2_NUM_FBS=3 | ||
986 | |||
987 | # | ||
988 | # OMAP2/3 Display Device Drivers | ||
989 | # | ||
990 | CONFIG_PANEL_GENERIC=y | ||
991 | CONFIG_PANEL_SHARP_LS037V7DW01=y | ||
970 | # CONFIG_BACKLIGHT_LCD_SUPPORT is not set | 992 | # CONFIG_BACKLIGHT_LCD_SUPPORT is not set |
971 | 993 | ||
972 | # | 994 | # |
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index 5a275bab2dfe..71e1a3fad0ea 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c | |||
@@ -14,6 +14,7 @@ | |||
14 | #include <linux/platform_device.h> | 14 | #include <linux/platform_device.h> |
15 | #include <linux/input.h> | 15 | #include <linux/input.h> |
16 | #include <linux/clk.h> | 16 | #include <linux/clk.h> |
17 | #include <linux/omapfb.h> | ||
17 | 18 | ||
18 | #include <linux/spi/spi.h> | 19 | #include <linux/spi/spi.h> |
19 | #include <linux/spi/ads7846.h> | 20 | #include <linux/spi/ads7846.h> |
@@ -32,7 +33,6 @@ | |||
32 | #include <plat/keypad.h> | 33 | #include <plat/keypad.h> |
33 | #include <plat/common.h> | 34 | #include <plat/common.h> |
34 | #include <plat/dsp_common.h> | 35 | #include <plat/dsp_common.h> |
35 | #include <plat/omapfb.h> | ||
36 | #include <plat/hwa742.h> | 36 | #include <plat/hwa742.h> |
37 | #include <plat/lcd_mipid.h> | 37 | #include <plat/lcd_mipid.h> |
38 | #include <plat/mmc.h> | 38 | #include <plat/mmc.h> |
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 491364e44c7d..5bda9fdbee9e 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c | |||
@@ -37,6 +37,7 @@ | |||
37 | #include <plat/common.h> | 37 | #include <plat/common.h> |
38 | #include <plat/dma.h> | 38 | #include <plat/dma.h> |
39 | #include <plat/gpmc.h> | 39 | #include <plat/gpmc.h> |
40 | #include <plat/display.h> | ||
40 | 41 | ||
41 | #include <plat/control.h> | 42 | #include <plat/control.h> |
42 | #include <plat/gpmc-smc91x.h> | 43 | #include <plat/gpmc-smc91x.h> |
@@ -152,31 +153,152 @@ static struct spi_board_info sdp3430_spi_board_info[] __initdata = { | |||
152 | }, | 153 | }, |
153 | }; | 154 | }; |
154 | 155 | ||
155 | static struct platform_device sdp3430_lcd_device = { | 156 | |
156 | .name = "sdp2430_lcd", | 157 | #define SDP3430_LCD_PANEL_BACKLIGHT_GPIO 8 |
157 | .id = -1, | 158 | #define SDP3430_LCD_PANEL_ENABLE_GPIO 5 |
159 | |||
160 | static unsigned backlight_gpio; | ||
161 | static unsigned enable_gpio; | ||
162 | static int lcd_enabled; | ||
163 | static int dvi_enabled; | ||
164 | |||
165 | static void __init sdp3430_display_init(void) | ||
166 | { | ||
167 | int r; | ||
168 | |||
169 | enable_gpio = SDP3430_LCD_PANEL_ENABLE_GPIO; | ||
170 | backlight_gpio = SDP3430_LCD_PANEL_BACKLIGHT_GPIO; | ||
171 | |||
172 | r = gpio_request(enable_gpio, "LCD reset"); | ||
173 | if (r) { | ||
174 | printk(KERN_ERR "failed to get LCD reset GPIO\n"); | ||
175 | goto err0; | ||
176 | } | ||
177 | |||
178 | r = gpio_request(backlight_gpio, "LCD Backlight"); | ||
179 | if (r) { | ||
180 | printk(KERN_ERR "failed to get LCD backlight GPIO\n"); | ||
181 | goto err1; | ||
182 | } | ||
183 | |||
184 | gpio_direction_output(enable_gpio, 0); | ||
185 | gpio_direction_output(backlight_gpio, 0); | ||
186 | |||
187 | return; | ||
188 | err1: | ||
189 | gpio_free(enable_gpio); | ||
190 | err0: | ||
191 | return; | ||
192 | } | ||
193 | |||
194 | static int sdp3430_panel_enable_lcd(struct omap_dss_device *dssdev) | ||
195 | { | ||
196 | if (dvi_enabled) { | ||
197 | printk(KERN_ERR "cannot enable LCD, DVI is enabled\n"); | ||
198 | return -EINVAL; | ||
199 | } | ||
200 | |||
201 | gpio_direction_output(enable_gpio, 1); | ||
202 | gpio_direction_output(backlight_gpio, 1); | ||
203 | |||
204 | lcd_enabled = 1; | ||
205 | |||
206 | return 0; | ||
207 | } | ||
208 | |||
209 | static void sdp3430_panel_disable_lcd(struct omap_dss_device *dssdev) | ||
210 | { | ||
211 | lcd_enabled = 0; | ||
212 | |||
213 | gpio_direction_output(enable_gpio, 0); | ||
214 | gpio_direction_output(backlight_gpio, 0); | ||
215 | } | ||
216 | |||
217 | static int sdp3430_panel_enable_dvi(struct omap_dss_device *dssdev) | ||
218 | { | ||
219 | if (lcd_enabled) { | ||
220 | printk(KERN_ERR "cannot enable DVI, LCD is enabled\n"); | ||
221 | return -EINVAL; | ||
222 | } | ||
223 | |||
224 | dvi_enabled = 1; | ||
225 | |||
226 | return 0; | ||
227 | } | ||
228 | |||
229 | static void sdp3430_panel_disable_dvi(struct omap_dss_device *dssdev) | ||
230 | { | ||
231 | dvi_enabled = 0; | ||
232 | } | ||
233 | |||
234 | static int sdp3430_panel_enable_tv(struct omap_dss_device *dssdev) | ||
235 | { | ||
236 | return 0; | ||
237 | } | ||
238 | |||
239 | static void sdp3430_panel_disable_tv(struct omap_dss_device *dssdev) | ||
240 | { | ||
241 | } | ||
242 | |||
243 | |||
244 | static struct omap_dss_device sdp3430_lcd_device = { | ||
245 | .name = "lcd", | ||
246 | .driver_name = "sharp_ls_panel", | ||
247 | .type = OMAP_DISPLAY_TYPE_DPI, | ||
248 | .phy.dpi.data_lines = 16, | ||
249 | .platform_enable = sdp3430_panel_enable_lcd, | ||
250 | .platform_disable = sdp3430_panel_disable_lcd, | ||
158 | }; | 251 | }; |
159 | 252 | ||
160 | static struct regulator_consumer_supply sdp3430_vdac_supply = { | 253 | static struct omap_dss_device sdp3430_dvi_device = { |
161 | .supply = "vdac", | 254 | .name = "dvi", |
162 | .dev = &sdp3430_lcd_device.dev, | 255 | .driver_name = "generic_panel", |
256 | .type = OMAP_DISPLAY_TYPE_DPI, | ||
257 | .phy.dpi.data_lines = 24, | ||
258 | .platform_enable = sdp3430_panel_enable_dvi, | ||
259 | .platform_disable = sdp3430_panel_disable_dvi, | ||
163 | }; | 260 | }; |
164 | 261 | ||
165 | static struct regulator_consumer_supply sdp3430_vdvi_supply = { | 262 | static struct omap_dss_device sdp3430_tv_device = { |
166 | .supply = "vdvi", | 263 | .name = "tv", |
167 | .dev = &sdp3430_lcd_device.dev, | 264 | .driver_name = "venc", |
265 | .type = OMAP_DISPLAY_TYPE_VENC, | ||
266 | .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, | ||
267 | .platform_enable = sdp3430_panel_enable_tv, | ||
268 | .platform_disable = sdp3430_panel_disable_tv, | ||
168 | }; | 269 | }; |
169 | 270 | ||
170 | static struct platform_device *sdp3430_devices[] __initdata = { | 271 | |
272 | static struct omap_dss_device *sdp3430_dss_devices[] = { | ||
171 | &sdp3430_lcd_device, | 273 | &sdp3430_lcd_device, |
274 | &sdp3430_dvi_device, | ||
275 | &sdp3430_tv_device, | ||
172 | }; | 276 | }; |
173 | 277 | ||
174 | static struct omap_lcd_config sdp3430_lcd_config __initdata = { | 278 | static struct omap_dss_board_info sdp3430_dss_data = { |
175 | .ctrl_name = "internal", | 279 | .num_devices = ARRAY_SIZE(sdp3430_dss_devices), |
280 | .devices = sdp3430_dss_devices, | ||
281 | .default_device = &sdp3430_lcd_device, | ||
282 | }; | ||
283 | |||
284 | static struct platform_device sdp3430_dss_device = { | ||
285 | .name = "omapdss", | ||
286 | .id = -1, | ||
287 | .dev = { | ||
288 | .platform_data = &sdp3430_dss_data, | ||
289 | }, | ||
290 | }; | ||
291 | |||
292 | static struct regulator_consumer_supply sdp3430_vdda_dac_supply = { | ||
293 | .supply = "vdda_dac", | ||
294 | .dev = &sdp3430_dss_device.dev, | ||
295 | }; | ||
296 | |||
297 | static struct platform_device *sdp3430_devices[] __initdata = { | ||
298 | &sdp3430_dss_device, | ||
176 | }; | 299 | }; |
177 | 300 | ||
178 | static struct omap_board_config_kernel sdp3430_config[] __initdata = { | 301 | static struct omap_board_config_kernel sdp3430_config[] __initdata = { |
179 | { OMAP_TAG_LCD, &sdp3430_lcd_config }, | ||
180 | }; | 302 | }; |
181 | 303 | ||
182 | static void __init omap_3430sdp_init_irq(void) | 304 | static void __init omap_3430sdp_init_irq(void) |
@@ -392,22 +514,34 @@ static struct regulator_init_data sdp3430_vdac = { | |||
392 | | REGULATOR_CHANGE_STATUS, | 514 | | REGULATOR_CHANGE_STATUS, |
393 | }, | 515 | }, |
394 | .num_consumer_supplies = 1, | 516 | .num_consumer_supplies = 1, |
395 | .consumer_supplies = &sdp3430_vdac_supply, | 517 | .consumer_supplies = &sdp3430_vdda_dac_supply, |
396 | }; | 518 | }; |
397 | 519 | ||
398 | /* VPLL2 for digital video outputs */ | 520 | /* VPLL2 for digital video outputs */ |
521 | static struct regulator_consumer_supply sdp3430_vpll2_supplies[] = { | ||
522 | { | ||
523 | .supply = "vdvi", | ||
524 | .dev = &sdp3430_lcd_device.dev, | ||
525 | }, | ||
526 | { | ||
527 | .supply = "vdds_dsi", | ||
528 | .dev = &sdp3430_dss_device.dev, | ||
529 | } | ||
530 | }; | ||
531 | |||
399 | static struct regulator_init_data sdp3430_vpll2 = { | 532 | static struct regulator_init_data sdp3430_vpll2 = { |
400 | .constraints = { | 533 | .constraints = { |
401 | .name = "VDVI", | 534 | .name = "VDVI", |
402 | .min_uV = 1800000, | 535 | .min_uV = 1800000, |
403 | .max_uV = 1800000, | 536 | .max_uV = 1800000, |
537 | .apply_uV = true, | ||
404 | .valid_modes_mask = REGULATOR_MODE_NORMAL | 538 | .valid_modes_mask = REGULATOR_MODE_NORMAL |
405 | | REGULATOR_MODE_STANDBY, | 539 | | REGULATOR_MODE_STANDBY, |
406 | .valid_ops_mask = REGULATOR_CHANGE_MODE | 540 | .valid_ops_mask = REGULATOR_CHANGE_MODE |
407 | | REGULATOR_CHANGE_STATUS, | 541 | | REGULATOR_CHANGE_STATUS, |
408 | }, | 542 | }, |
409 | .num_consumer_supplies = 1, | 543 | .num_consumer_supplies = ARRAY_SIZE(sdp3430_vpll2_supplies), |
410 | .consumer_supplies = &sdp3430_vdvi_supply, | 544 | .consumer_supplies = sdp3430_vpll2_supplies, |
411 | }; | 545 | }; |
412 | 546 | ||
413 | static struct twl4030_codec_audio_data sdp3430_audio = { | 547 | static struct twl4030_codec_audio_data sdp3430_audio = { |
@@ -521,6 +655,7 @@ static void __init omap_3430sdp_init(void) | |||
521 | omap_serial_init(); | 655 | omap_serial_init(); |
522 | usb_musb_init(); | 656 | usb_musb_init(); |
523 | board_smc91x_init(); | 657 | board_smc91x_init(); |
658 | sdp3430_display_init(); | ||
524 | enable_board_wakeup_source(); | 659 | enable_board_wakeup_source(); |
525 | usb_ehci_init(&ehci_pdata); | 660 | usb_ehci_init(&ehci_pdata); |
526 | } | 661 | } |
diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c index e70e7e000eaa..845b478ebeee 100644 --- a/arch/arm/mach-omap2/clock24xx.c +++ b/arch/arm/mach-omap2/clock24xx.c | |||
@@ -116,10 +116,10 @@ static struct omap_clk omap24xx_clks[] = { | |||
116 | CLK(NULL, "mdm_ick", &mdm_ick, CK_243X), | 116 | CLK(NULL, "mdm_ick", &mdm_ick, CK_243X), |
117 | CLK(NULL, "mdm_osc_ck", &mdm_osc_ck, CK_243X), | 117 | CLK(NULL, "mdm_osc_ck", &mdm_osc_ck, CK_243X), |
118 | /* DSS domain clocks */ | 118 | /* DSS domain clocks */ |
119 | CLK("omapfb", "ick", &dss_ick, CK_243X | CK_242X), | 119 | CLK("omapdss", "ick", &dss_ick, CK_243X | CK_242X), |
120 | CLK("omapfb", "dss1_fck", &dss1_fck, CK_243X | CK_242X), | 120 | CLK("omapdss", "dss1_fck", &dss1_fck, CK_243X | CK_242X), |
121 | CLK("omapfb", "dss2_fck", &dss2_fck, CK_243X | CK_242X), | 121 | CLK("omapdss", "dss2_fck", &dss2_fck, CK_243X | CK_242X), |
122 | CLK("omapfb", "tv_fck", &dss_54m_fck, CK_243X | CK_242X), | 122 | CLK("omapdss", "tv_fck", &dss_54m_fck, CK_243X | CK_242X), |
123 | /* L3 domain clocks */ | 123 | /* L3 domain clocks */ |
124 | CLK(NULL, "core_l3_ck", &core_l3_ck, CK_243X | CK_242X), | 124 | CLK(NULL, "core_l3_ck", &core_l3_ck, CK_243X | CK_242X), |
125 | CLK(NULL, "ssi_fck", &ssi_ssr_sst_fck, CK_243X | CK_242X), | 125 | CLK(NULL, "ssi_fck", &ssi_ssr_sst_fck, CK_243X | CK_242X), |
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index 9f2feaf79865..ecbb5cd8eec8 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c | |||
@@ -236,13 +236,13 @@ static struct omap_clk omap34xx_clks[] = { | |||
236 | CLK("omap_rng", "ick", &rng_ick, CK_343X), | 236 | CLK("omap_rng", "ick", &rng_ick, CK_343X), |
237 | CLK(NULL, "sha11_ick", &sha11_ick, CK_343X), | 237 | CLK(NULL, "sha11_ick", &sha11_ick, CK_343X), |
238 | CLK(NULL, "des1_ick", &des1_ick, CK_343X), | 238 | CLK(NULL, "des1_ick", &des1_ick, CK_343X), |
239 | CLK("omapfb", "dss1_fck", &dss1_alwon_fck_3430es1, CK_3430ES1), | 239 | CLK("omapdss", "dss1_fck", &dss1_alwon_fck_3430es1, CK_3430ES1), |
240 | CLK("omapfb", "dss1_fck", &dss1_alwon_fck_3430es2, CK_3430ES2), | 240 | CLK("omapdss", "dss1_fck", &dss1_alwon_fck_3430es2, CK_3430ES2), |
241 | CLK("omapfb", "tv_fck", &dss_tv_fck, CK_343X), | 241 | CLK("omapdss", "tv_fck", &dss_tv_fck, CK_343X), |
242 | CLK("omapfb", "video_fck", &dss_96m_fck, CK_343X), | 242 | CLK("omapdss", "video_fck", &dss_96m_fck, CK_343X), |
243 | CLK("omapfb", "dss2_fck", &dss2_alwon_fck, CK_343X), | 243 | CLK("omapdss", "dss2_fck", &dss2_alwon_fck, CK_343X), |
244 | CLK("omapfb", "ick", &dss_ick_3430es1, CK_3430ES1), | 244 | CLK("omapdss", "ick", &dss_ick_3430es1, CK_3430ES1), |
245 | CLK("omapfb", "ick", &dss_ick_3430es2, CK_3430ES2), | 245 | CLK("omapdss", "ick", &dss_ick_3430es2, CK_3430ES2), |
246 | CLK(NULL, "cam_mclk", &cam_mclk, CK_343X), | 246 | CLK(NULL, "cam_mclk", &cam_mclk, CK_343X), |
247 | CLK(NULL, "cam_ick", &cam_ick, CK_343X), | 247 | CLK(NULL, "cam_ick", &cam_ick, CK_343X), |
248 | CLK(NULL, "csi2_96m_fck", &csi2_96m_fck, CK_343X), | 248 | CLK(NULL, "csi2_96m_fck", &csi2_96m_fck, CK_343X), |
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 59d28b2fd8c5..6a4d8e468703 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c | |||
@@ -22,17 +22,18 @@ | |||
22 | #include <linux/init.h> | 22 | #include <linux/init.h> |
23 | #include <linux/io.h> | 23 | #include <linux/io.h> |
24 | #include <linux/clk.h> | 24 | #include <linux/clk.h> |
25 | #include <linux/omapfb.h> | ||
25 | 26 | ||
26 | #include <asm/tlb.h> | 27 | #include <asm/tlb.h> |
27 | 28 | ||
28 | #include <asm/mach/map.h> | 29 | #include <asm/mach/map.h> |
29 | 30 | ||
30 | #include <plat/mux.h> | 31 | #include <plat/mux.h> |
31 | #include <plat/omapfb.h> | ||
32 | #include <plat/sram.h> | 32 | #include <plat/sram.h> |
33 | #include <plat/sdrc.h> | 33 | #include <plat/sdrc.h> |
34 | #include <plat/gpmc.h> | 34 | #include <plat/gpmc.h> |
35 | #include <plat/serial.h> | 35 | #include <plat/serial.h> |
36 | #include <plat/vram.h> | ||
36 | 37 | ||
37 | #ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once clkdev is ready */ | 38 | #ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once clkdev is ready */ |
38 | #include "clock.h" | 39 | #include "clock.h" |
@@ -264,6 +265,7 @@ void __init omap2_map_common_io(void) | |||
264 | omap2_check_revision(); | 265 | omap2_check_revision(); |
265 | omap_sram_init(); | 266 | omap_sram_init(); |
266 | omapfb_reserve_sdram(); | 267 | omapfb_reserve_sdram(); |
268 | omap_vram_reserve_sdram(); | ||
267 | } | 269 | } |
268 | 270 | ||
269 | /* | 271 | /* |
diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c index 9a592199321c..cbfbd142e946 100644 --- a/arch/arm/mach-omap2/sdrc.c +++ b/arch/arm/mach-omap2/sdrc.c | |||
@@ -160,3 +160,19 @@ void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0, | |||
160 | sdrc_write_reg(l, SDRC_POWER); | 160 | sdrc_write_reg(l, SDRC_POWER); |
161 | omap2_sms_save_context(); | 161 | omap2_sms_save_context(); |
162 | } | 162 | } |
163 | |||
164 | void omap2_sms_write_rot_control(u32 val, unsigned ctx) | ||
165 | { | ||
166 | sms_write_reg(val, SMS_ROT_CONTROL(ctx)); | ||
167 | } | ||
168 | |||
169 | void omap2_sms_write_rot_size(u32 val, unsigned ctx) | ||
170 | { | ||
171 | sms_write_reg(val, SMS_ROT_SIZE(ctx)); | ||
172 | } | ||
173 | |||
174 | void omap2_sms_write_rot_physical_ba(u32 val, unsigned ctx) | ||
175 | { | ||
176 | sms_write_reg(val, SMS_ROT_PHYSICAL_BA(ctx)); | ||
177 | } | ||
178 | |||
diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c index 78a4ce538dbd..d3eea4f47533 100644 --- a/arch/arm/plat-omap/fb.c +++ b/arch/arm/plat-omap/fb.c | |||
@@ -28,13 +28,13 @@ | |||
28 | #include <linux/platform_device.h> | 28 | #include <linux/platform_device.h> |
29 | #include <linux/bootmem.h> | 29 | #include <linux/bootmem.h> |
30 | #include <linux/io.h> | 30 | #include <linux/io.h> |
31 | #include <linux/omapfb.h> | ||
31 | 32 | ||
32 | #include <mach/hardware.h> | 33 | #include <mach/hardware.h> |
33 | #include <asm/mach/map.h> | 34 | #include <asm/mach/map.h> |
34 | 35 | ||
35 | #include <plat/board.h> | 36 | #include <plat/board.h> |
36 | #include <plat/sram.h> | 37 | #include <plat/sram.h> |
37 | #include <plat/omapfb.h> | ||
38 | 38 | ||
39 | #if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE) | 39 | #if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE) |
40 | 40 | ||
@@ -55,6 +55,10 @@ static struct platform_device omap_fb_device = { | |||
55 | .num_resources = 0, | 55 | .num_resources = 0, |
56 | }; | 56 | }; |
57 | 57 | ||
58 | void omapfb_set_platform_data(struct omapfb_platform_data *data) | ||
59 | { | ||
60 | } | ||
61 | |||
58 | static inline int ranges_overlap(unsigned long start1, unsigned long size1, | 62 | static inline int ranges_overlap(unsigned long start1, unsigned long size1, |
59 | unsigned long start2, unsigned long size2) | 63 | unsigned long start2, unsigned long size2) |
60 | { | 64 | { |
@@ -327,7 +331,33 @@ static inline int omap_init_fb(void) | |||
327 | 331 | ||
328 | arch_initcall(omap_init_fb); | 332 | arch_initcall(omap_init_fb); |
329 | 333 | ||
330 | #else | 334 | #elif defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE) |
335 | |||
336 | static u64 omap_fb_dma_mask = ~(u32)0; | ||
337 | static struct omapfb_platform_data omapfb_config; | ||
338 | |||
339 | static struct platform_device omap_fb_device = { | ||
340 | .name = "omapfb", | ||
341 | .id = -1, | ||
342 | .dev = { | ||
343 | .dma_mask = &omap_fb_dma_mask, | ||
344 | .coherent_dma_mask = ~(u32)0, | ||
345 | .platform_data = &omapfb_config, | ||
346 | }, | ||
347 | .num_resources = 0, | ||
348 | }; | ||
349 | |||
350 | void omapfb_set_platform_data(struct omapfb_platform_data *data) | ||
351 | { | ||
352 | omapfb_config = *data; | ||
353 | } | ||
354 | |||
355 | static inline int omap_init_fb(void) | ||
356 | { | ||
357 | return platform_device_register(&omap_fb_device); | ||
358 | } | ||
359 | |||
360 | arch_initcall(omap_init_fb); | ||
331 | 361 | ||
332 | void omapfb_reserve_sdram(void) {} | 362 | void omapfb_reserve_sdram(void) {} |
333 | unsigned long omapfb_reserve_sram(unsigned long sram_pstart, | 363 | unsigned long omapfb_reserve_sram(unsigned long sram_pstart, |
@@ -339,5 +369,20 @@ unsigned long omapfb_reserve_sram(unsigned long sram_pstart, | |||
339 | return 0; | 369 | return 0; |
340 | } | 370 | } |
341 | 371 | ||
372 | #else | ||
373 | |||
374 | void omapfb_set_platform_data(struct omapfb_platform_data *data) | ||
375 | { | ||
376 | } | ||
377 | |||
378 | void omapfb_reserve_sdram(void) {} | ||
379 | unsigned long omapfb_reserve_sram(unsigned long sram_pstart, | ||
380 | unsigned long sram_vstart, | ||
381 | unsigned long sram_size, | ||
382 | unsigned long start_avail, | ||
383 | unsigned long size_avail) | ||
384 | { | ||
385 | return 0; | ||
386 | } | ||
342 | 387 | ||
343 | #endif | 388 | #endif |
diff --git a/arch/arm/plat-omap/include/plat/display.h b/arch/arm/plat-omap/include/plat/display.h new file mode 100644 index 000000000000..c66e464732df --- /dev/null +++ b/arch/arm/plat-omap/include/plat/display.h | |||
@@ -0,0 +1,575 @@ | |||
1 | /* | ||
2 | * linux/include/asm-arm/arch-omap/display.h | ||
3 | * | ||
4 | * Copyright (C) 2008 Nokia Corporation | ||
5 | * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> | ||
6 | * | ||
7 | * This program is free software; you can redistribute it and/or modify it | ||
8 | * under the terms of the GNU General Public License version 2 as published by | ||
9 | * the Free Software Foundation. | ||
10 | * | ||
11 | * This program is distributed in the hope that it will be useful, but WITHOUT | ||
12 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | ||
13 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for | ||
14 | * more details. | ||
15 | * | ||
16 | * You should have received a copy of the GNU General Public License along with | ||
17 | * this program. If not, see <http://www.gnu.org/licenses/>. | ||
18 | */ | ||
19 | |||
20 | #ifndef __ASM_ARCH_OMAP_DISPLAY_H | ||
21 | #define __ASM_ARCH_OMAP_DISPLAY_H | ||
22 | |||
23 | #include <linux/list.h> | ||
24 | #include <linux/kobject.h> | ||
25 | #include <linux/device.h> | ||
26 | #include <asm/atomic.h> | ||
27 | |||
28 | #define DISPC_IRQ_FRAMEDONE (1 << 0) | ||
29 | #define DISPC_IRQ_VSYNC (1 << 1) | ||
30 | #define DISPC_IRQ_EVSYNC_EVEN (1 << 2) | ||
31 | #define DISPC_IRQ_EVSYNC_ODD (1 << 3) | ||
32 | #define DISPC_IRQ_ACBIAS_COUNT_STAT (1 << 4) | ||
33 | #define DISPC_IRQ_PROG_LINE_NUM (1 << 5) | ||
34 | #define DISPC_IRQ_GFX_FIFO_UNDERFLOW (1 << 6) | ||
35 | #define DISPC_IRQ_GFX_END_WIN (1 << 7) | ||
36 | #define DISPC_IRQ_PAL_GAMMA_MASK (1 << 8) | ||
37 | #define DISPC_IRQ_OCP_ERR (1 << 9) | ||
38 | #define DISPC_IRQ_VID1_FIFO_UNDERFLOW (1 << 10) | ||
39 | #define DISPC_IRQ_VID1_END_WIN (1 << 11) | ||
40 | #define DISPC_IRQ_VID2_FIFO_UNDERFLOW (1 << 12) | ||
41 | #define DISPC_IRQ_VID2_END_WIN (1 << 13) | ||
42 | #define DISPC_IRQ_SYNC_LOST (1 << 14) | ||
43 | #define DISPC_IRQ_SYNC_LOST_DIGIT (1 << 15) | ||
44 | #define DISPC_IRQ_WAKEUP (1 << 16) | ||
45 | |||
46 | struct omap_dss_device; | ||
47 | struct omap_overlay_manager; | ||
48 | |||
49 | enum omap_display_type { | ||
50 | OMAP_DISPLAY_TYPE_NONE = 0, | ||
51 | OMAP_DISPLAY_TYPE_DPI = 1 << 0, | ||
52 | OMAP_DISPLAY_TYPE_DBI = 1 << 1, | ||
53 | OMAP_DISPLAY_TYPE_SDI = 1 << 2, | ||
54 | OMAP_DISPLAY_TYPE_DSI = 1 << 3, | ||
55 | OMAP_DISPLAY_TYPE_VENC = 1 << 4, | ||
56 | }; | ||
57 | |||
58 | enum omap_plane { | ||
59 | OMAP_DSS_GFX = 0, | ||
60 | OMAP_DSS_VIDEO1 = 1, | ||
61 | OMAP_DSS_VIDEO2 = 2 | ||
62 | }; | ||
63 | |||
64 | enum omap_channel { | ||
65 | OMAP_DSS_CHANNEL_LCD = 0, | ||
66 | OMAP_DSS_CHANNEL_DIGIT = 1, | ||
67 | }; | ||
68 | |||
69 | enum omap_color_mode { | ||
70 | OMAP_DSS_COLOR_CLUT1 = 1 << 0, /* BITMAP 1 */ | ||
71 | OMAP_DSS_COLOR_CLUT2 = 1 << 1, /* BITMAP 2 */ | ||
72 | OMAP_DSS_COLOR_CLUT4 = 1 << 2, /* BITMAP 4 */ | ||
73 | OMAP_DSS_COLOR_CLUT8 = 1 << 3, /* BITMAP 8 */ | ||
74 | OMAP_DSS_COLOR_RGB12U = 1 << 4, /* RGB12, 16-bit container */ | ||
75 | OMAP_DSS_COLOR_ARGB16 = 1 << 5, /* ARGB16 */ | ||
76 | OMAP_DSS_COLOR_RGB16 = 1 << 6, /* RGB16 */ | ||
77 | OMAP_DSS_COLOR_RGB24U = 1 << 7, /* RGB24, 32-bit container */ | ||
78 | OMAP_DSS_COLOR_RGB24P = 1 << 8, /* RGB24, 24-bit container */ | ||
79 | OMAP_DSS_COLOR_YUV2 = 1 << 9, /* YUV2 4:2:2 co-sited */ | ||
80 | OMAP_DSS_COLOR_UYVY = 1 << 10, /* UYVY 4:2:2 co-sited */ | ||
81 | OMAP_DSS_COLOR_ARGB32 = 1 << 11, /* ARGB32 */ | ||
82 | OMAP_DSS_COLOR_RGBA32 = 1 << 12, /* RGBA32 */ | ||
83 | OMAP_DSS_COLOR_RGBX32 = 1 << 13, /* RGBx32 */ | ||
84 | |||
85 | OMAP_DSS_COLOR_GFX_OMAP2 = | ||
86 | OMAP_DSS_COLOR_CLUT1 | OMAP_DSS_COLOR_CLUT2 | | ||
87 | OMAP_DSS_COLOR_CLUT4 | OMAP_DSS_COLOR_CLUT8 | | ||
88 | OMAP_DSS_COLOR_RGB12U | OMAP_DSS_COLOR_RGB16 | | ||
89 | OMAP_DSS_COLOR_RGB24U | OMAP_DSS_COLOR_RGB24P, | ||
90 | |||
91 | OMAP_DSS_COLOR_VID_OMAP2 = | ||
92 | OMAP_DSS_COLOR_RGB16 | OMAP_DSS_COLOR_RGB24U | | ||
93 | OMAP_DSS_COLOR_RGB24P | OMAP_DSS_COLOR_YUV2 | | ||
94 | OMAP_DSS_COLOR_UYVY, | ||
95 | |||
96 | OMAP_DSS_COLOR_GFX_OMAP3 = | ||
97 | OMAP_DSS_COLOR_CLUT1 | OMAP_DSS_COLOR_CLUT2 | | ||
98 | OMAP_DSS_COLOR_CLUT4 | OMAP_DSS_COLOR_CLUT8 | | ||
99 | OMAP_DSS_COLOR_RGB12U | OMAP_DSS_COLOR_ARGB16 | | ||
100 | OMAP_DSS_COLOR_RGB16 | OMAP_DSS_COLOR_RGB24U | | ||
101 | OMAP_DSS_COLOR_RGB24P | OMAP_DSS_COLOR_ARGB32 | | ||
102 | OMAP_DSS_COLOR_RGBA32 | OMAP_DSS_COLOR_RGBX32, | ||
103 | |||
104 | OMAP_DSS_COLOR_VID1_OMAP3 = | ||
105 | OMAP_DSS_COLOR_RGB12U | OMAP_DSS_COLOR_RGB16 | | ||
106 | OMAP_DSS_COLOR_RGB24U | OMAP_DSS_COLOR_RGB24P | | ||
107 | OMAP_DSS_COLOR_YUV2 | OMAP_DSS_COLOR_UYVY, | ||
108 | |||
109 | OMAP_DSS_COLOR_VID2_OMAP3 = | ||
110 | OMAP_DSS_COLOR_RGB12U | OMAP_DSS_COLOR_ARGB16 | | ||
111 | OMAP_DSS_COLOR_RGB16 | OMAP_DSS_COLOR_RGB24U | | ||
112 | OMAP_DSS_COLOR_RGB24P | OMAP_DSS_COLOR_YUV2 | | ||
113 | OMAP_DSS_COLOR_UYVY | OMAP_DSS_COLOR_ARGB32 | | ||
114 | OMAP_DSS_COLOR_RGBA32 | OMAP_DSS_COLOR_RGBX32, | ||
115 | }; | ||
116 | |||
117 | enum omap_lcd_display_type { | ||
118 | OMAP_DSS_LCD_DISPLAY_STN, | ||
119 | OMAP_DSS_LCD_DISPLAY_TFT, | ||
120 | }; | ||
121 | |||
122 | enum omap_dss_load_mode { | ||
123 | OMAP_DSS_LOAD_CLUT_AND_FRAME = 0, | ||
124 | OMAP_DSS_LOAD_CLUT_ONLY = 1, | ||
125 | OMAP_DSS_LOAD_FRAME_ONLY = 2, | ||
126 | OMAP_DSS_LOAD_CLUT_ONCE_FRAME = 3, | ||
127 | }; | ||
128 | |||
129 | enum omap_dss_trans_key_type { | ||
130 | OMAP_DSS_COLOR_KEY_GFX_DST = 0, | ||
131 | OMAP_DSS_COLOR_KEY_VID_SRC = 1, | ||
132 | }; | ||
133 | |||
134 | enum omap_rfbi_te_mode { | ||
135 | OMAP_DSS_RFBI_TE_MODE_1 = 1, | ||
136 | OMAP_DSS_RFBI_TE_MODE_2 = 2, | ||
137 | }; | ||
138 | |||
139 | enum omap_panel_config { | ||
140 | OMAP_DSS_LCD_IVS = 1<<0, | ||
141 | OMAP_DSS_LCD_IHS = 1<<1, | ||
142 | OMAP_DSS_LCD_IPC = 1<<2, | ||
143 | OMAP_DSS_LCD_IEO = 1<<3, | ||
144 | OMAP_DSS_LCD_RF = 1<<4, | ||
145 | OMAP_DSS_LCD_ONOFF = 1<<5, | ||
146 | |||
147 | OMAP_DSS_LCD_TFT = 1<<20, | ||
148 | }; | ||
149 | |||
150 | enum omap_dss_venc_type { | ||
151 | OMAP_DSS_VENC_TYPE_COMPOSITE, | ||
152 | OMAP_DSS_VENC_TYPE_SVIDEO, | ||
153 | }; | ||
154 | |||
155 | enum omap_display_caps { | ||
156 | OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE = 1 << 0, | ||
157 | OMAP_DSS_DISPLAY_CAP_TEAR_ELIM = 1 << 1, | ||
158 | }; | ||
159 | |||
160 | enum omap_dss_update_mode { | ||
161 | OMAP_DSS_UPDATE_DISABLED = 0, | ||
162 | OMAP_DSS_UPDATE_AUTO, | ||
163 | OMAP_DSS_UPDATE_MANUAL, | ||
164 | }; | ||
165 | |||
166 | enum omap_dss_display_state { | ||
167 | OMAP_DSS_DISPLAY_DISABLED = 0, | ||
168 | OMAP_DSS_DISPLAY_ACTIVE, | ||
169 | OMAP_DSS_DISPLAY_SUSPENDED, | ||
170 | }; | ||
171 | |||
172 | /* XXX perhaps this should be removed */ | ||
173 | enum omap_dss_overlay_managers { | ||
174 | OMAP_DSS_OVL_MGR_LCD, | ||
175 | OMAP_DSS_OVL_MGR_TV, | ||
176 | }; | ||
177 | |||
178 | enum omap_dss_rotation_type { | ||
179 | OMAP_DSS_ROT_DMA = 0, | ||
180 | OMAP_DSS_ROT_VRFB = 1, | ||
181 | }; | ||
182 | |||
183 | /* clockwise rotation angle */ | ||
184 | enum omap_dss_rotation_angle { | ||
185 | OMAP_DSS_ROT_0 = 0, | ||
186 | OMAP_DSS_ROT_90 = 1, | ||
187 | OMAP_DSS_ROT_180 = 2, | ||
188 | OMAP_DSS_ROT_270 = 3, | ||
189 | }; | ||
190 | |||
191 | enum omap_overlay_caps { | ||
192 | OMAP_DSS_OVL_CAP_SCALE = 1 << 0, | ||
193 | OMAP_DSS_OVL_CAP_DISPC = 1 << 1, | ||
194 | }; | ||
195 | |||
196 | enum omap_overlay_manager_caps { | ||
197 | OMAP_DSS_OVL_MGR_CAP_DISPC = 1 << 0, | ||
198 | }; | ||
199 | |||
200 | /* RFBI */ | ||
201 | |||
202 | struct rfbi_timings { | ||
203 | int cs_on_time; | ||
204 | int cs_off_time; | ||
205 | int we_on_time; | ||
206 | int we_off_time; | ||
207 | int re_on_time; | ||
208 | int re_off_time; | ||
209 | int we_cycle_time; | ||
210 | int re_cycle_time; | ||
211 | int cs_pulse_width; | ||
212 | int access_time; | ||
213 | |||
214 | int clk_div; | ||
215 | |||
216 | u32 tim[5]; /* set by rfbi_convert_timings() */ | ||
217 | |||
218 | int converted; | ||
219 | }; | ||
220 | |||
221 | void omap_rfbi_write_command(const void *buf, u32 len); | ||
222 | void omap_rfbi_read_data(void *buf, u32 len); | ||
223 | void omap_rfbi_write_data(const void *buf, u32 len); | ||
224 | void omap_rfbi_write_pixels(const void __iomem *buf, int scr_width, | ||
225 | u16 x, u16 y, | ||
226 | u16 w, u16 h); | ||
227 | int omap_rfbi_enable_te(bool enable, unsigned line); | ||
228 | int omap_rfbi_setup_te(enum omap_rfbi_te_mode mode, | ||
229 | unsigned hs_pulse_time, unsigned vs_pulse_time, | ||
230 | int hs_pol_inv, int vs_pol_inv, int extif_div); | ||
231 | |||
232 | /* DSI */ | ||
233 | void dsi_bus_lock(void); | ||
234 | void dsi_bus_unlock(void); | ||
235 | int dsi_vc_dcs_write(int channel, u8 *data, int len); | ||
236 | int dsi_vc_dcs_write_nosync(int channel, u8 *data, int len); | ||
237 | int dsi_vc_dcs_read(int channel, u8 dcs_cmd, u8 *buf, int buflen); | ||
238 | int dsi_vc_set_max_rx_packet_size(int channel, u16 len); | ||
239 | int dsi_vc_send_null(int channel); | ||
240 | int dsi_vc_send_bta_sync(int channel); | ||
241 | |||
242 | /* Board specific data */ | ||
243 | struct omap_dss_board_info { | ||
244 | int (*get_last_off_on_transaction_id)(struct device *dev); | ||
245 | int num_devices; | ||
246 | struct omap_dss_device **devices; | ||
247 | struct omap_dss_device *default_device; | ||
248 | }; | ||
249 | |||
250 | struct omap_video_timings { | ||
251 | /* Unit: pixels */ | ||
252 | u16 x_res; | ||
253 | /* Unit: pixels */ | ||
254 | u16 y_res; | ||
255 | /* Unit: KHz */ | ||
256 | u32 pixel_clock; | ||
257 | /* Unit: pixel clocks */ | ||
258 | u16 hsw; /* Horizontal synchronization pulse width */ | ||
259 | /* Unit: pixel clocks */ | ||
260 | u16 hfp; /* Horizontal front porch */ | ||
261 | /* Unit: pixel clocks */ | ||
262 | u16 hbp; /* Horizontal back porch */ | ||
263 | /* Unit: line clocks */ | ||
264 | u16 vsw; /* Vertical synchronization pulse width */ | ||
265 | /* Unit: line clocks */ | ||
266 | u16 vfp; /* Vertical front porch */ | ||
267 | /* Unit: line clocks */ | ||
268 | u16 vbp; /* Vertical back porch */ | ||
269 | }; | ||
270 | |||
271 | #ifdef CONFIG_OMAP2_DSS_VENC | ||
272 | /* Hardcoded timings for tv modes. Venc only uses these to | ||
273 | * identify the mode, and does not actually use the configs | ||
274 | * itself. However, the configs should be something that | ||
275 | * a normal monitor can also show */ | ||
276 | const extern struct omap_video_timings omap_dss_pal_timings; | ||
277 | const extern struct omap_video_timings omap_dss_ntsc_timings; | ||
278 | #endif | ||
279 | |||
280 | struct omap_overlay_info { | ||
281 | bool enabled; | ||
282 | |||
283 | u32 paddr; | ||
284 | void __iomem *vaddr; | ||
285 | u16 screen_width; | ||
286 | u16 width; | ||
287 | u16 height; | ||
288 | enum omap_color_mode color_mode; | ||
289 | u8 rotation; | ||
290 | enum omap_dss_rotation_type rotation_type; | ||
291 | bool mirror; | ||
292 | |||
293 | u16 pos_x; | ||
294 | u16 pos_y; | ||
295 | u16 out_width; /* if 0, out_width == width */ | ||
296 | u16 out_height; /* if 0, out_height == height */ | ||
297 | u8 global_alpha; | ||
298 | }; | ||
299 | |||
300 | struct omap_overlay { | ||
301 | struct kobject kobj; | ||
302 | struct list_head list; | ||
303 | |||
304 | /* static fields */ | ||
305 | const char *name; | ||
306 | int id; | ||
307 | enum omap_color_mode supported_modes; | ||
308 | enum omap_overlay_caps caps; | ||
309 | |||
310 | /* dynamic fields */ | ||
311 | struct omap_overlay_manager *manager; | ||
312 | struct omap_overlay_info info; | ||
313 | |||
314 | /* if true, info has been changed, but not applied() yet */ | ||
315 | bool info_dirty; | ||
316 | |||
317 | int (*set_manager)(struct omap_overlay *ovl, | ||
318 | struct omap_overlay_manager *mgr); | ||
319 | int (*unset_manager)(struct omap_overlay *ovl); | ||
320 | |||
321 | int (*set_overlay_info)(struct omap_overlay *ovl, | ||
322 | struct omap_overlay_info *info); | ||
323 | void (*get_overlay_info)(struct omap_overlay *ovl, | ||
324 | struct omap_overlay_info *info); | ||
325 | |||
326 | int (*wait_for_go)(struct omap_overlay *ovl); | ||
327 | }; | ||
328 | |||
329 | struct omap_overlay_manager_info { | ||
330 | u32 default_color; | ||
331 | |||
332 | enum omap_dss_trans_key_type trans_key_type; | ||
333 | u32 trans_key; | ||
334 | bool trans_enabled; | ||
335 | |||
336 | bool alpha_enabled; | ||
337 | }; | ||
338 | |||
339 | struct omap_overlay_manager { | ||
340 | struct kobject kobj; | ||
341 | struct list_head list; | ||
342 | |||
343 | /* static fields */ | ||
344 | const char *name; | ||
345 | int id; | ||
346 | enum omap_overlay_manager_caps caps; | ||
347 | int num_overlays; | ||
348 | struct omap_overlay **overlays; | ||
349 | enum omap_display_type supported_displays; | ||
350 | |||
351 | /* dynamic fields */ | ||
352 | struct omap_dss_device *device; | ||
353 | struct omap_overlay_manager_info info; | ||
354 | |||
355 | bool device_changed; | ||
356 | /* if true, info has been changed but not applied() yet */ | ||
357 | bool info_dirty; | ||
358 | |||
359 | int (*set_device)(struct omap_overlay_manager *mgr, | ||
360 | struct omap_dss_device *dssdev); | ||
361 | int (*unset_device)(struct omap_overlay_manager *mgr); | ||
362 | |||
363 | int (*set_manager_info)(struct omap_overlay_manager *mgr, | ||
364 | struct omap_overlay_manager_info *info); | ||
365 | void (*get_manager_info)(struct omap_overlay_manager *mgr, | ||
366 | struct omap_overlay_manager_info *info); | ||
367 | |||
368 | int (*apply)(struct omap_overlay_manager *mgr); | ||
369 | int (*wait_for_go)(struct omap_overlay_manager *mgr); | ||
370 | }; | ||
371 | |||
372 | struct omap_dss_device { | ||
373 | struct device dev; | ||
374 | |||
375 | enum omap_display_type type; | ||
376 | |||
377 | union { | ||
378 | struct { | ||
379 | u8 data_lines; | ||
380 | } dpi; | ||
381 | |||
382 | struct { | ||
383 | u8 channel; | ||
384 | u8 data_lines; | ||
385 | } rfbi; | ||
386 | |||
387 | struct { | ||
388 | u8 datapairs; | ||
389 | } sdi; | ||
390 | |||
391 | struct { | ||
392 | u8 clk_lane; | ||
393 | u8 clk_pol; | ||
394 | u8 data1_lane; | ||
395 | u8 data1_pol; | ||
396 | u8 data2_lane; | ||
397 | u8 data2_pol; | ||
398 | |||
399 | struct { | ||
400 | u16 regn; | ||
401 | u16 regm; | ||
402 | u16 regm3; | ||
403 | u16 regm4; | ||
404 | |||
405 | u16 lp_clk_div; | ||
406 | |||
407 | u16 lck_div; | ||
408 | u16 pck_div; | ||
409 | } div; | ||
410 | |||
411 | bool ext_te; | ||
412 | u8 ext_te_gpio; | ||
413 | } dsi; | ||
414 | |||
415 | struct { | ||
416 | enum omap_dss_venc_type type; | ||
417 | bool invert_polarity; | ||
418 | } venc; | ||
419 | } phy; | ||
420 | |||
421 | struct { | ||
422 | struct omap_video_timings timings; | ||
423 | |||
424 | int acbi; /* ac-bias pin transitions per interrupt */ | ||
425 | /* Unit: line clocks */ | ||
426 | int acb; /* ac-bias pin frequency */ | ||
427 | |||
428 | enum omap_panel_config config; | ||
429 | |||
430 | u8 recommended_bpp; | ||
431 | |||
432 | struct omap_dss_device *ctrl; | ||
433 | } panel; | ||
434 | |||
435 | struct { | ||
436 | u8 pixel_size; | ||
437 | struct rfbi_timings rfbi_timings; | ||
438 | struct omap_dss_device *panel; | ||
439 | } ctrl; | ||
440 | |||
441 | int reset_gpio; | ||
442 | |||
443 | int max_backlight_level; | ||
444 | |||
445 | const char *name; | ||
446 | |||
447 | /* used to match device to driver */ | ||
448 | const char *driver_name; | ||
449 | |||
450 | void *data; | ||
451 | |||
452 | struct omap_dss_driver *driver; | ||
453 | |||
454 | /* helper variable for driver suspend/resume */ | ||
455 | bool activate_after_resume; | ||
456 | |||
457 | enum omap_display_caps caps; | ||
458 | |||
459 | struct omap_overlay_manager *manager; | ||
460 | |||
461 | enum omap_dss_display_state state; | ||
462 | |||
463 | int (*enable)(struct omap_dss_device *dssdev); | ||
464 | void (*disable)(struct omap_dss_device *dssdev); | ||
465 | |||
466 | int (*suspend)(struct omap_dss_device *dssdev); | ||
467 | int (*resume)(struct omap_dss_device *dssdev); | ||
468 | |||
469 | void (*get_resolution)(struct omap_dss_device *dssdev, | ||
470 | u16 *xres, u16 *yres); | ||
471 | int (*get_recommended_bpp)(struct omap_dss_device *dssdev); | ||
472 | |||
473 | int (*check_timings)(struct omap_dss_device *dssdev, | ||
474 | struct omap_video_timings *timings); | ||
475 | void (*set_timings)(struct omap_dss_device *dssdev, | ||
476 | struct omap_video_timings *timings); | ||
477 | void (*get_timings)(struct omap_dss_device *dssdev, | ||
478 | struct omap_video_timings *timings); | ||
479 | int (*update)(struct omap_dss_device *dssdev, | ||
480 | u16 x, u16 y, u16 w, u16 h); | ||
481 | int (*sync)(struct omap_dss_device *dssdev); | ||
482 | int (*wait_vsync)(struct omap_dss_device *dssdev); | ||
483 | |||
484 | int (*set_update_mode)(struct omap_dss_device *dssdev, | ||
485 | enum omap_dss_update_mode); | ||
486 | enum omap_dss_update_mode (*get_update_mode) | ||
487 | (struct omap_dss_device *dssdev); | ||
488 | |||
489 | int (*enable_te)(struct omap_dss_device *dssdev, bool enable); | ||
490 | int (*get_te)(struct omap_dss_device *dssdev); | ||
491 | |||
492 | u8 (*get_rotate)(struct omap_dss_device *dssdev); | ||
493 | int (*set_rotate)(struct omap_dss_device *dssdev, u8 rotate); | ||
494 | |||
495 | bool (*get_mirror)(struct omap_dss_device *dssdev); | ||
496 | int (*set_mirror)(struct omap_dss_device *dssdev, bool enable); | ||
497 | |||
498 | int (*run_test)(struct omap_dss_device *dssdev, int test); | ||
499 | int (*memory_read)(struct omap_dss_device *dssdev, | ||
500 | void *buf, size_t size, | ||
501 | u16 x, u16 y, u16 w, u16 h); | ||
502 | |||
503 | int (*set_wss)(struct omap_dss_device *dssdev, u32 wss); | ||
504 | u32 (*get_wss)(struct omap_dss_device *dssdev); | ||
505 | |||
506 | /* platform specific */ | ||
507 | int (*platform_enable)(struct omap_dss_device *dssdev); | ||
508 | void (*platform_disable)(struct omap_dss_device *dssdev); | ||
509 | int (*set_backlight)(struct omap_dss_device *dssdev, int level); | ||
510 | int (*get_backlight)(struct omap_dss_device *dssdev); | ||
511 | }; | ||
512 | |||
513 | struct omap_dss_driver { | ||
514 | struct device_driver driver; | ||
515 | |||
516 | int (*probe)(struct omap_dss_device *); | ||
517 | void (*remove)(struct omap_dss_device *); | ||
518 | |||
519 | int (*enable)(struct omap_dss_device *display); | ||
520 | void (*disable)(struct omap_dss_device *display); | ||
521 | int (*suspend)(struct omap_dss_device *display); | ||
522 | int (*resume)(struct omap_dss_device *display); | ||
523 | int (*run_test)(struct omap_dss_device *display, int test); | ||
524 | |||
525 | void (*setup_update)(struct omap_dss_device *dssdev, | ||
526 | u16 x, u16 y, u16 w, u16 h); | ||
527 | |||
528 | int (*enable_te)(struct omap_dss_device *dssdev, bool enable); | ||
529 | int (*wait_for_te)(struct omap_dss_device *dssdev); | ||
530 | |||
531 | u8 (*get_rotate)(struct omap_dss_device *dssdev); | ||
532 | int (*set_rotate)(struct omap_dss_device *dssdev, u8 rotate); | ||
533 | |||
534 | bool (*get_mirror)(struct omap_dss_device *dssdev); | ||
535 | int (*set_mirror)(struct omap_dss_device *dssdev, bool enable); | ||
536 | |||
537 | int (*memory_read)(struct omap_dss_device *dssdev, | ||
538 | void *buf, size_t size, | ||
539 | u16 x, u16 y, u16 w, u16 h); | ||
540 | }; | ||
541 | |||
542 | int omap_dss_register_driver(struct omap_dss_driver *); | ||
543 | void omap_dss_unregister_driver(struct omap_dss_driver *); | ||
544 | |||
545 | int omap_dss_register_device(struct omap_dss_device *); | ||
546 | void omap_dss_unregister_device(struct omap_dss_device *); | ||
547 | |||
548 | void omap_dss_get_device(struct omap_dss_device *dssdev); | ||
549 | void omap_dss_put_device(struct omap_dss_device *dssdev); | ||
550 | #define for_each_dss_dev(d) while ((d = omap_dss_get_next_device(d)) != NULL) | ||
551 | struct omap_dss_device *omap_dss_get_next_device(struct omap_dss_device *from); | ||
552 | struct omap_dss_device *omap_dss_find_device(void *data, | ||
553 | int (*match)(struct omap_dss_device *dssdev, void *data)); | ||
554 | |||
555 | int omap_dss_start_device(struct omap_dss_device *dssdev); | ||
556 | void omap_dss_stop_device(struct omap_dss_device *dssdev); | ||
557 | |||
558 | int omap_dss_get_num_overlay_managers(void); | ||
559 | struct omap_overlay_manager *omap_dss_get_overlay_manager(int num); | ||
560 | |||
561 | int omap_dss_get_num_overlays(void); | ||
562 | struct omap_overlay *omap_dss_get_overlay(int num); | ||
563 | |||
564 | typedef void (*omap_dispc_isr_t) (void *arg, u32 mask); | ||
565 | int omap_dispc_register_isr(omap_dispc_isr_t isr, void *arg, u32 mask); | ||
566 | int omap_dispc_unregister_isr(omap_dispc_isr_t isr, void *arg, u32 mask); | ||
567 | |||
568 | int omap_dispc_wait_for_irq_timeout(u32 irqmask, unsigned long timeout); | ||
569 | int omap_dispc_wait_for_irq_interruptible_timeout(u32 irqmask, | ||
570 | unsigned long timeout); | ||
571 | |||
572 | #define to_dss_driver(x) container_of((x), struct omap_dss_driver, driver) | ||
573 | #define to_dss_device(x) container_of((x), struct omap_dss_device, dev) | ||
574 | |||
575 | #endif | ||
diff --git a/arch/arm/plat-omap/include/plat/sdrc.h b/arch/arm/plat-omap/include/plat/sdrc.h index f704030d2a70..7b76f50564ba 100644 --- a/arch/arm/plat-omap/include/plat/sdrc.h +++ b/arch/arm/plat-omap/include/plat/sdrc.h | |||
@@ -94,7 +94,10 @@ | |||
94 | 94 | ||
95 | /* SMS register offsets - read/write with sms_{read,write}_reg() */ | 95 | /* SMS register offsets - read/write with sms_{read,write}_reg() */ |
96 | 96 | ||
97 | #define SMS_SYSCONFIG 0x010 | 97 | #define SMS_SYSCONFIG 0x010 |
98 | #define SMS_ROT_CONTROL(context) (0x180 + 0x10 * context) | ||
99 | #define SMS_ROT_SIZE(context) (0x184 + 0x10 * context) | ||
100 | #define SMS_ROT_PHYSICAL_BA(context) (0x188 + 0x10 * context) | ||
98 | /* REVISIT: fill in other SMS registers here */ | 101 | /* REVISIT: fill in other SMS registers here */ |
99 | 102 | ||
100 | 103 | ||
@@ -129,6 +132,10 @@ int omap2_sdrc_get_params(unsigned long r, | |||
129 | void omap2_sms_save_context(void); | 132 | void omap2_sms_save_context(void); |
130 | void omap2_sms_restore_context(void); | 133 | void omap2_sms_restore_context(void); |
131 | 134 | ||
135 | void omap2_sms_write_rot_control(u32 val, unsigned ctx); | ||
136 | void omap2_sms_write_rot_size(u32 val, unsigned ctx); | ||
137 | void omap2_sms_write_rot_physical_ba(u32 val, unsigned ctx); | ||
138 | |||
132 | #ifdef CONFIG_ARCH_OMAP2 | 139 | #ifdef CONFIG_ARCH_OMAP2 |
133 | 140 | ||
134 | struct memory_timings { | 141 | struct memory_timings { |
diff --git a/arch/arm/plat-omap/include/plat/vram.h b/arch/arm/plat-omap/include/plat/vram.h new file mode 100644 index 000000000000..edd4987758a6 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/vram.h | |||
@@ -0,0 +1,62 @@ | |||
1 | /* | ||
2 | * VRAM manager for OMAP | ||
3 | * | ||
4 | * Copyright (C) 2009 Nokia Corporation | ||
5 | * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> | ||
6 | * | ||
7 | * This program is free software; you can redistribute it and/or modify | ||
8 | * it under the terms of the GNU General Public License version 2 as | ||
9 | * published by the Free Software Foundation. | ||
10 | * | ||
11 | * This program is distributed in the hope that it will be useful, but | ||
12 | * WITHOUT ANY WARRANTY; without even the implied warranty of | ||
13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | ||
14 | * General Public License for more details. | ||
15 | * | ||
16 | * You should have received a copy of the GNU General Public License along | ||
17 | * with this program; if not, write to the Free Software Foundation, Inc., | ||
18 | * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. | ||
19 | */ | ||
20 | |||
21 | #ifndef __OMAP_VRAM_H__ | ||
22 | #define __OMAP_VRAM_H__ | ||
23 | |||
24 | #include <linux/types.h> | ||
25 | |||
26 | #define OMAP_VRAM_MEMTYPE_SDRAM 0 | ||
27 | #define OMAP_VRAM_MEMTYPE_SRAM 1 | ||
28 | #define OMAP_VRAM_MEMTYPE_MAX 1 | ||
29 | |||
30 | extern int omap_vram_add_region(unsigned long paddr, size_t size); | ||
31 | extern int omap_vram_free(unsigned long paddr, size_t size); | ||
32 | extern int omap_vram_alloc(int mtype, size_t size, unsigned long *paddr); | ||
33 | extern int omap_vram_reserve(unsigned long paddr, size_t size); | ||
34 | extern void omap_vram_get_info(unsigned long *vram, unsigned long *free_vram, | ||
35 | unsigned long *largest_free_block); | ||
36 | |||
37 | #ifdef CONFIG_OMAP2_VRAM | ||
38 | extern void omap_vram_set_sdram_vram(u32 size, u32 start); | ||
39 | extern void omap_vram_set_sram_vram(u32 size, u32 start); | ||
40 | |||
41 | extern void omap_vram_reserve_sdram(void); | ||
42 | extern unsigned long omap_vram_reserve_sram(unsigned long sram_pstart, | ||
43 | unsigned long sram_vstart, | ||
44 | unsigned long sram_size, | ||
45 | unsigned long pstart_avail, | ||
46 | unsigned long size_avail); | ||
47 | #else | ||
48 | static inline void omap_vram_set_sdram_vram(u32 size, u32 start) { } | ||
49 | static inline void omap_vram_set_sram_vram(u32 size, u32 start) { } | ||
50 | |||
51 | static inline void omap_vram_reserve_sdram(void) { } | ||
52 | static inline unsigned long omap_vram_reserve_sram(unsigned long sram_pstart, | ||
53 | unsigned long sram_vstart, | ||
54 | unsigned long sram_size, | ||
55 | unsigned long pstart_avail, | ||
56 | unsigned long size_avail) | ||
57 | { | ||
58 | return 0; | ||
59 | } | ||
60 | #endif | ||
61 | |||
62 | #endif | ||
diff --git a/arch/arm/plat-omap/include/plat/vrfb.h b/arch/arm/plat-omap/include/plat/vrfb.h new file mode 100644 index 000000000000..d8a03ced3b10 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/vrfb.h | |||
@@ -0,0 +1,50 @@ | |||
1 | /* | ||
2 | * VRFB Rotation Engine | ||
3 | * | ||
4 | * Copyright (C) 2009 Nokia Corporation | ||
5 | * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> | ||
6 | * | ||
7 | * This program is free software; you can redistribute it and/or modify | ||
8 | * it under the terms of the GNU General Public License version 2 as | ||
9 | * published by the Free Software Foundation. | ||
10 | * | ||
11 | * This program is distributed in the hope that it will be useful, but | ||
12 | * WITHOUT ANY WARRANTY; without even the implied warranty of | ||
13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | ||
14 | * General Public License for more details. | ||
15 | * | ||
16 | * You should have received a copy of the GNU General Public License along | ||
17 | * with this program; if not, write to the Free Software Foundation, Inc., | ||
18 | * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. | ||
19 | */ | ||
20 | |||
21 | #ifndef __OMAP_VRFB_H__ | ||
22 | #define __OMAP_VRFB_H__ | ||
23 | |||
24 | #define OMAP_VRFB_LINE_LEN 2048 | ||
25 | |||
26 | struct vrfb { | ||
27 | u8 context; | ||
28 | void __iomem *vaddr[4]; | ||
29 | unsigned long paddr[4]; | ||
30 | u16 xres; | ||
31 | u16 yres; | ||
32 | u16 xoffset; | ||
33 | u16 yoffset; | ||
34 | u8 bytespp; | ||
35 | bool yuv_mode; | ||
36 | }; | ||
37 | |||
38 | extern int omap_vrfb_request_ctx(struct vrfb *vrfb); | ||
39 | extern void omap_vrfb_release_ctx(struct vrfb *vrfb); | ||
40 | extern void omap_vrfb_adjust_size(u16 *width, u16 *height, | ||
41 | u8 bytespp); | ||
42 | extern u32 omap_vrfb_min_phys_size(u16 width, u16 height, u8 bytespp); | ||
43 | extern u16 omap_vrfb_max_height(u32 phys_size, u16 width, u8 bytespp); | ||
44 | extern void omap_vrfb_setup(struct vrfb *vrfb, unsigned long paddr, | ||
45 | u16 width, u16 height, | ||
46 | unsigned bytespp, bool yuv_mode); | ||
47 | extern int omap_vrfb_map_angle(struct vrfb *vrfb, u16 height, u8 rot); | ||
48 | extern void omap_vrfb_restore_context(void); | ||
49 | |||
50 | #endif /* __VRFB_H */ | ||
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 3e923668778d..ad2bf07d30b5 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c | |||
@@ -28,6 +28,7 @@ | |||
28 | #include <plat/sram.h> | 28 | #include <plat/sram.h> |
29 | #include <plat/board.h> | 29 | #include <plat/board.h> |
30 | #include <plat/cpu.h> | 30 | #include <plat/cpu.h> |
31 | #include <plat/vram.h> | ||
31 | 32 | ||
32 | #include <plat/control.h> | 33 | #include <plat/control.h> |
33 | 34 | ||
@@ -185,6 +186,13 @@ void __init omap_detect_sram(void) | |||
185 | omap_sram_start + SRAM_BOOTLOADER_SZ, | 186 | omap_sram_start + SRAM_BOOTLOADER_SZ, |
186 | omap_sram_size - SRAM_BOOTLOADER_SZ); | 187 | omap_sram_size - SRAM_BOOTLOADER_SZ); |
187 | omap_sram_size -= reserved; | 188 | omap_sram_size -= reserved; |
189 | |||
190 | reserved = omap_vram_reserve_sram(omap_sram_start, omap_sram_base, | ||
191 | omap_sram_size, | ||
192 | omap_sram_start + SRAM_BOOTLOADER_SZ, | ||
193 | omap_sram_size - SRAM_BOOTLOADER_SZ); | ||
194 | omap_sram_size -= reserved; | ||
195 | |||
188 | omap_sram_ceil = omap_sram_base + omap_sram_size; | 196 | omap_sram_ceil = omap_sram_base + omap_sram_size; |
189 | } | 197 | } |
190 | 198 | ||
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index e9f193e6b27e..bb5fbed89e7f 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig | |||
@@ -2165,6 +2165,7 @@ config FB_BROADSHEET | |||
2165 | a bridge adapter. | 2165 | a bridge adapter. |
2166 | 2166 | ||
2167 | source "drivers/video/omap/Kconfig" | 2167 | source "drivers/video/omap/Kconfig" |
2168 | source "drivers/video/omap2/Kconfig" | ||
2168 | 2169 | ||
2169 | source "drivers/video/backlight/Kconfig" | 2170 | source "drivers/video/backlight/Kconfig" |
2170 | source "drivers/video/display/Kconfig" | 2171 | source "drivers/video/display/Kconfig" |
diff --git a/drivers/video/Makefile b/drivers/video/Makefile index 80232e124889..0f8da331ba0f 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile | |||
@@ -124,6 +124,7 @@ obj-$(CONFIG_FB_SM501) += sm501fb.o | |||
124 | obj-$(CONFIG_FB_XILINX) += xilinxfb.o | 124 | obj-$(CONFIG_FB_XILINX) += xilinxfb.o |
125 | obj-$(CONFIG_FB_SH_MOBILE_LCDC) += sh_mobile_lcdcfb.o | 125 | obj-$(CONFIG_FB_SH_MOBILE_LCDC) += sh_mobile_lcdcfb.o |
126 | obj-$(CONFIG_FB_OMAP) += omap/ | 126 | obj-$(CONFIG_FB_OMAP) += omap/ |
127 | obj-y += omap2/ | ||
127 | obj-$(CONFIG_XEN_FBDEV_FRONTEND) += xen-fbfront.o | 128 | obj-$(CONFIG_XEN_FBDEV_FRONTEND) += xen-fbfront.o |
128 | obj-$(CONFIG_FB_CARMINE) += carminefb.o | 129 | obj-$(CONFIG_FB_CARMINE) += carminefb.o |
129 | obj-$(CONFIG_FB_MB862XX) += mb862xx/ | 130 | obj-$(CONFIG_FB_MB862XX) += mb862xx/ |
diff --git a/drivers/video/omap/Kconfig b/drivers/video/omap/Kconfig index 551e3e9c4cbe..455c6055325d 100644 --- a/drivers/video/omap/Kconfig +++ b/drivers/video/omap/Kconfig | |||
@@ -1,6 +1,7 @@ | |||
1 | config FB_OMAP | 1 | config FB_OMAP |
2 | tristate "OMAP frame buffer support (EXPERIMENTAL)" | 2 | tristate "OMAP frame buffer support (EXPERIMENTAL)" |
3 | depends on FB && ARCH_OMAP | 3 | depends on FB && ARCH_OMAP && (OMAP2_DSS = "n") |
4 | |||
4 | select FB_CFB_FILLRECT | 5 | select FB_CFB_FILLRECT |
5 | select FB_CFB_COPYAREA | 6 | select FB_CFB_COPYAREA |
6 | select FB_CFB_IMAGEBLIT | 7 | select FB_CFB_IMAGEBLIT |
@@ -72,7 +73,7 @@ config FB_OMAP_LCD_MIPID | |||
72 | 73 | ||
73 | config FB_OMAP_BOOTLOADER_INIT | 74 | config FB_OMAP_BOOTLOADER_INIT |
74 | bool "Check bootloader initialization" | 75 | bool "Check bootloader initialization" |
75 | depends on FB_OMAP | 76 | depends on FB_OMAP || FB_OMAP2 |
76 | help | 77 | help |
77 | Say Y here if you want to enable checking if the bootloader has | 78 | Say Y here if you want to enable checking if the bootloader has |
78 | already initialized the display controller. In this case the | 79 | already initialized the display controller. In this case the |
diff --git a/drivers/video/omap/blizzard.c b/drivers/video/omap/blizzard.c index f5d75f22cef9..2ffb34af4c59 100644 --- a/drivers/video/omap/blizzard.c +++ b/drivers/video/omap/blizzard.c | |||
@@ -27,9 +27,9 @@ | |||
27 | #include <linux/clk.h> | 27 | #include <linux/clk.h> |
28 | 28 | ||
29 | #include <plat/dma.h> | 29 | #include <plat/dma.h> |
30 | #include <plat/omapfb.h> | ||
31 | #include <plat/blizzard.h> | 30 | #include <plat/blizzard.h> |
32 | 31 | ||
32 | #include "omapfb.h" | ||
33 | #include "dispc.h" | 33 | #include "dispc.h" |
34 | 34 | ||
35 | #define MODULE_NAME "blizzard" | 35 | #define MODULE_NAME "blizzard" |
diff --git a/drivers/video/omap/dispc.c b/drivers/video/omap/dispc.c index 7c833db4f9b7..c7c6455f1fa8 100644 --- a/drivers/video/omap/dispc.c +++ b/drivers/video/omap/dispc.c | |||
@@ -24,11 +24,12 @@ | |||
24 | #include <linux/vmalloc.h> | 24 | #include <linux/vmalloc.h> |
25 | #include <linux/clk.h> | 25 | #include <linux/clk.h> |
26 | #include <linux/io.h> | 26 | #include <linux/io.h> |
27 | #include <linux/platform_device.h> | ||
27 | 28 | ||
28 | #include <plat/sram.h> | 29 | #include <plat/sram.h> |
29 | #include <plat/omapfb.h> | ||
30 | #include <plat/board.h> | 30 | #include <plat/board.h> |
31 | 31 | ||
32 | #include "omapfb.h" | ||
32 | #include "dispc.h" | 33 | #include "dispc.h" |
33 | 34 | ||
34 | #define MODULE_NAME "dispc" | 35 | #define MODULE_NAME "dispc" |
@@ -188,6 +189,11 @@ static struct { | |||
188 | struct omapfb_color_key color_key; | 189 | struct omapfb_color_key color_key; |
189 | } dispc; | 190 | } dispc; |
190 | 191 | ||
192 | static struct platform_device omapdss_device = { | ||
193 | .name = "omapdss", | ||
194 | .id = -1, | ||
195 | }; | ||
196 | |||
191 | static void enable_lcd_clocks(int enable); | 197 | static void enable_lcd_clocks(int enable); |
192 | 198 | ||
193 | static void inline dispc_write_reg(int idx, u32 val) | 199 | static void inline dispc_write_reg(int idx, u32 val) |
@@ -914,20 +920,20 @@ static irqreturn_t omap_dispc_irq_handler(int irq, void *dev) | |||
914 | 920 | ||
915 | static int get_dss_clocks(void) | 921 | static int get_dss_clocks(void) |
916 | { | 922 | { |
917 | dispc.dss_ick = clk_get(dispc.fbdev->dev, "ick"); | 923 | dispc.dss_ick = clk_get(&omapdss_device.dev, "ick"); |
918 | if (IS_ERR(dispc.dss_ick)) { | 924 | if (IS_ERR(dispc.dss_ick)) { |
919 | dev_err(dispc.fbdev->dev, "can't get ick\n"); | 925 | dev_err(dispc.fbdev->dev, "can't get ick\n"); |
920 | return PTR_ERR(dispc.dss_ick); | 926 | return PTR_ERR(dispc.dss_ick); |
921 | } | 927 | } |
922 | 928 | ||
923 | dispc.dss1_fck = clk_get(dispc.fbdev->dev, "dss1_fck"); | 929 | dispc.dss1_fck = clk_get(&omapdss_device.dev, "dss1_fck"); |
924 | if (IS_ERR(dispc.dss1_fck)) { | 930 | if (IS_ERR(dispc.dss1_fck)) { |
925 | dev_err(dispc.fbdev->dev, "can't get dss1_fck\n"); | 931 | dev_err(dispc.fbdev->dev, "can't get dss1_fck\n"); |
926 | clk_put(dispc.dss_ick); | 932 | clk_put(dispc.dss_ick); |
927 | return PTR_ERR(dispc.dss1_fck); | 933 | return PTR_ERR(dispc.dss1_fck); |
928 | } | 934 | } |
929 | 935 | ||
930 | dispc.dss_54m_fck = clk_get(dispc.fbdev->dev, "tv_fck"); | 936 | dispc.dss_54m_fck = clk_get(&omapdss_device.dev, "tv_fck"); |
931 | if (IS_ERR(dispc.dss_54m_fck)) { | 937 | if (IS_ERR(dispc.dss_54m_fck)) { |
932 | dev_err(dispc.fbdev->dev, "can't get tv_fck\n"); | 938 | dev_err(dispc.fbdev->dev, "can't get tv_fck\n"); |
933 | clk_put(dispc.dss_ick); | 939 | clk_put(dispc.dss_ick); |
@@ -1379,6 +1385,12 @@ static int omap_dispc_init(struct omapfb_device *fbdev, int ext_mode, | |||
1379 | int skip_init = 0; | 1385 | int skip_init = 0; |
1380 | int i; | 1386 | int i; |
1381 | 1387 | ||
1388 | r = platform_device_register(&omapdss_device); | ||
1389 | if (r) { | ||
1390 | dev_err(fbdev->dev, "can't register omapdss device\n"); | ||
1391 | return r; | ||
1392 | } | ||
1393 | |||
1382 | memset(&dispc, 0, sizeof(dispc)); | 1394 | memset(&dispc, 0, sizeof(dispc)); |
1383 | 1395 | ||
1384 | dispc.base = ioremap(DISPC_BASE, SZ_1K); | 1396 | dispc.base = ioremap(DISPC_BASE, SZ_1K); |
@@ -1522,6 +1534,7 @@ static void omap_dispc_cleanup(void) | |||
1522 | free_irq(INT_24XX_DSS_IRQ, dispc.fbdev); | 1534 | free_irq(INT_24XX_DSS_IRQ, dispc.fbdev); |
1523 | put_dss_clocks(); | 1535 | put_dss_clocks(); |
1524 | iounmap(dispc.base); | 1536 | iounmap(dispc.base); |
1537 | platform_device_unregister(&omapdss_device); | ||
1525 | } | 1538 | } |
1526 | 1539 | ||
1527 | const struct lcd_ctrl omap2_int_ctrl = { | 1540 | const struct lcd_ctrl omap2_int_ctrl = { |
diff --git a/drivers/video/omap/hwa742.c b/drivers/video/omap/hwa742.c index 17a975e4c9c9..0016f77cd13f 100644 --- a/drivers/video/omap/hwa742.c +++ b/drivers/video/omap/hwa742.c | |||
@@ -25,10 +25,11 @@ | |||
25 | #include <linux/fb.h> | 25 | #include <linux/fb.h> |
26 | #include <linux/delay.h> | 26 | #include <linux/delay.h> |
27 | #include <linux/clk.h> | 27 | #include <linux/clk.h> |
28 | #include <linux/interrupt.h> | ||
28 | 29 | ||
29 | #include <plat/dma.h> | 30 | #include <plat/dma.h> |
30 | #include <plat/omapfb.h> | ||
31 | #include <plat/hwa742.h> | 31 | #include <plat/hwa742.h> |
32 | #include "omapfb.h" | ||
32 | 33 | ||
33 | #define HWA742_REV_CODE_REG 0x0 | 34 | #define HWA742_REV_CODE_REG 0x0 |
34 | #define HWA742_CONFIG_REG 0x2 | 35 | #define HWA742_CONFIG_REG 0x2 |
diff --git a/drivers/video/omap/lcd_2430sdp.c b/drivers/video/omap/lcd_2430sdp.c index fea7feee0b77..760645d9dbb6 100644 --- a/drivers/video/omap/lcd_2430sdp.c +++ b/drivers/video/omap/lcd_2430sdp.c | |||
@@ -28,9 +28,10 @@ | |||
28 | #include <linux/i2c/twl4030.h> | 28 | #include <linux/i2c/twl4030.h> |
29 | 29 | ||
30 | #include <plat/mux.h> | 30 | #include <plat/mux.h> |
31 | #include <plat/omapfb.h> | ||
32 | #include <asm/mach-types.h> | 31 | #include <asm/mach-types.h> |
33 | 32 | ||
33 | #include "omapfb.h" | ||
34 | |||
34 | #define SDP2430_LCD_PANEL_BACKLIGHT_GPIO 91 | 35 | #define SDP2430_LCD_PANEL_BACKLIGHT_GPIO 91 |
35 | #define SDP2430_LCD_PANEL_ENABLE_GPIO 154 | 36 | #define SDP2430_LCD_PANEL_ENABLE_GPIO 154 |
36 | #define SDP3430_LCD_PANEL_BACKLIGHT_GPIO 24 | 37 | #define SDP3430_LCD_PANEL_BACKLIGHT_GPIO 24 |
diff --git a/drivers/video/omap/lcd_ams_delta.c b/drivers/video/omap/lcd_ams_delta.c index b3973ebd1b0f..567db6ac32c8 100644 --- a/drivers/video/omap/lcd_ams_delta.c +++ b/drivers/video/omap/lcd_ams_delta.c | |||
@@ -27,7 +27,8 @@ | |||
27 | 27 | ||
28 | #include <plat/board-ams-delta.h> | 28 | #include <plat/board-ams-delta.h> |
29 | #include <mach/hardware.h> | 29 | #include <mach/hardware.h> |
30 | #include <plat/omapfb.h> | 30 | |
31 | #include "omapfb.h" | ||
31 | 32 | ||
32 | #define AMS_DELTA_DEFAULT_CONTRAST 112 | 33 | #define AMS_DELTA_DEFAULT_CONTRAST 112 |
33 | 34 | ||
diff --git a/drivers/video/omap/lcd_apollon.c b/drivers/video/omap/lcd_apollon.c index 4c5cefc5153b..2be94eb3bbf5 100644 --- a/drivers/video/omap/lcd_apollon.c +++ b/drivers/video/omap/lcd_apollon.c | |||
@@ -26,7 +26,8 @@ | |||
26 | 26 | ||
27 | #include <mach/gpio.h> | 27 | #include <mach/gpio.h> |
28 | #include <plat/mux.h> | 28 | #include <plat/mux.h> |
29 | #include <plat/omapfb.h> | 29 | |
30 | #include "omapfb.h" | ||
30 | 31 | ||
31 | /* #define USE_35INCH_LCD 1 */ | 32 | /* #define USE_35INCH_LCD 1 */ |
32 | 33 | ||
diff --git a/drivers/video/omap/lcd_h3.c b/drivers/video/omap/lcd_h3.c index 240b4fb10741..8df688748b5a 100644 --- a/drivers/video/omap/lcd_h3.c +++ b/drivers/video/omap/lcd_h3.c | |||
@@ -24,7 +24,7 @@ | |||
24 | #include <linux/i2c/tps65010.h> | 24 | #include <linux/i2c/tps65010.h> |
25 | 25 | ||
26 | #include <mach/gpio.h> | 26 | #include <mach/gpio.h> |
27 | #include <plat/omapfb.h> | 27 | #include "omapfb.h" |
28 | 28 | ||
29 | #define MODULE_NAME "omapfb-lcd_h3" | 29 | #define MODULE_NAME "omapfb-lcd_h3" |
30 | 30 | ||
diff --git a/drivers/video/omap/lcd_h4.c b/drivers/video/omap/lcd_h4.c index 720625da1f4e..03a06a982750 100644 --- a/drivers/video/omap/lcd_h4.c +++ b/drivers/video/omap/lcd_h4.c | |||
@@ -22,7 +22,7 @@ | |||
22 | #include <linux/module.h> | 22 | #include <linux/module.h> |
23 | #include <linux/platform_device.h> | 23 | #include <linux/platform_device.h> |
24 | 24 | ||
25 | #include <plat/omapfb.h> | 25 | #include "omapfb.h" |
26 | 26 | ||
27 | static int h4_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev) | 27 | static int h4_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev) |
28 | { | 28 | { |
diff --git a/drivers/video/omap/lcd_htcherald.c b/drivers/video/omap/lcd_htcherald.c index 2e0c81ea7483..a9007c5d1fad 100644 --- a/drivers/video/omap/lcd_htcherald.c +++ b/drivers/video/omap/lcd_htcherald.c | |||
@@ -29,7 +29,7 @@ | |||
29 | #include <linux/module.h> | 29 | #include <linux/module.h> |
30 | #include <linux/platform_device.h> | 30 | #include <linux/platform_device.h> |
31 | 31 | ||
32 | #include <plat/omapfb.h> | 32 | #include "omapfb.h" |
33 | 33 | ||
34 | static int htcherald_panel_init(struct lcd_panel *panel, | 34 | static int htcherald_panel_init(struct lcd_panel *panel, |
35 | struct omapfb_device *fbdev) | 35 | struct omapfb_device *fbdev) |
diff --git a/drivers/video/omap/lcd_inn1510.c b/drivers/video/omap/lcd_inn1510.c index aafe9b497e2d..3271f1643b26 100644 --- a/drivers/video/omap/lcd_inn1510.c +++ b/drivers/video/omap/lcd_inn1510.c | |||
@@ -24,7 +24,7 @@ | |||
24 | #include <linux/io.h> | 24 | #include <linux/io.h> |
25 | 25 | ||
26 | #include <plat/fpga.h> | 26 | #include <plat/fpga.h> |
27 | #include <plat/omapfb.h> | 27 | #include "omapfb.h" |
28 | 28 | ||
29 | static int innovator1510_panel_init(struct lcd_panel *panel, | 29 | static int innovator1510_panel_init(struct lcd_panel *panel, |
30 | struct omapfb_device *fbdev) | 30 | struct omapfb_device *fbdev) |
diff --git a/drivers/video/omap/lcd_inn1610.c b/drivers/video/omap/lcd_inn1610.c index 0de338264a8a..9fff86f67bde 100644 --- a/drivers/video/omap/lcd_inn1610.c +++ b/drivers/video/omap/lcd_inn1610.c | |||
@@ -23,7 +23,7 @@ | |||
23 | #include <linux/platform_device.h> | 23 | #include <linux/platform_device.h> |
24 | 24 | ||
25 | #include <mach/gpio.h> | 25 | #include <mach/gpio.h> |
26 | #include <plat/omapfb.h> | 26 | #include "omapfb.h" |
27 | 27 | ||
28 | #define MODULE_NAME "omapfb-lcd_h3" | 28 | #define MODULE_NAME "omapfb-lcd_h3" |
29 | 29 | ||
diff --git a/drivers/video/omap/lcd_ldp.c b/drivers/video/omap/lcd_ldp.c index 6a260dfdadc5..5bb7f6f14601 100644 --- a/drivers/video/omap/lcd_ldp.c +++ b/drivers/video/omap/lcd_ldp.c | |||
@@ -28,9 +28,10 @@ | |||
28 | 28 | ||
29 | #include <mach/gpio.h> | 29 | #include <mach/gpio.h> |
30 | #include <plat/mux.h> | 30 | #include <plat/mux.h> |
31 | #include <plat/omapfb.h> | ||
32 | #include <asm/mach-types.h> | 31 | #include <asm/mach-types.h> |
33 | 32 | ||
33 | #include "omapfb.h" | ||
34 | |||
34 | #define LCD_PANEL_BACKLIGHT_GPIO (15 + OMAP_MAX_GPIO_LINES) | 35 | #define LCD_PANEL_BACKLIGHT_GPIO (15 + OMAP_MAX_GPIO_LINES) |
35 | #define LCD_PANEL_ENABLE_GPIO (7 + OMAP_MAX_GPIO_LINES) | 36 | #define LCD_PANEL_ENABLE_GPIO (7 + OMAP_MAX_GPIO_LINES) |
36 | 37 | ||
diff --git a/drivers/video/omap/lcd_mipid.c b/drivers/video/omap/lcd_mipid.c index 8f3e2b4bb4f3..abe1c76a3257 100644 --- a/drivers/video/omap/lcd_mipid.c +++ b/drivers/video/omap/lcd_mipid.c | |||
@@ -23,9 +23,10 @@ | |||
23 | #include <linux/workqueue.h> | 23 | #include <linux/workqueue.h> |
24 | #include <linux/spi/spi.h> | 24 | #include <linux/spi/spi.h> |
25 | 25 | ||
26 | #include <plat/omapfb.h> | ||
27 | #include <plat/lcd_mipid.h> | 26 | #include <plat/lcd_mipid.h> |
28 | 27 | ||
28 | #include "omapfb.h" | ||
29 | |||
29 | #define MIPID_MODULE_NAME "lcd_mipid" | 30 | #define MIPID_MODULE_NAME "lcd_mipid" |
30 | 31 | ||
31 | #define MIPID_CMD_READ_DISP_ID 0x04 | 32 | #define MIPID_CMD_READ_DISP_ID 0x04 |
diff --git a/drivers/video/omap/lcd_omap2evm.c b/drivers/video/omap/lcd_omap2evm.c index e1a38abca3e7..006c2fe7360e 100644 --- a/drivers/video/omap/lcd_omap2evm.c +++ b/drivers/video/omap/lcd_omap2evm.c | |||
@@ -27,9 +27,10 @@ | |||
27 | #include <linux/i2c/twl4030.h> | 27 | #include <linux/i2c/twl4030.h> |
28 | 28 | ||
29 | #include <plat/mux.h> | 29 | #include <plat/mux.h> |
30 | #include <plat/omapfb.h> | ||
31 | #include <asm/mach-types.h> | 30 | #include <asm/mach-types.h> |
32 | 31 | ||
32 | #include "omapfb.h" | ||
33 | |||
33 | #define LCD_PANEL_ENABLE_GPIO 154 | 34 | #define LCD_PANEL_ENABLE_GPIO 154 |
34 | #define LCD_PANEL_LR 128 | 35 | #define LCD_PANEL_LR 128 |
35 | #define LCD_PANEL_UD 129 | 36 | #define LCD_PANEL_UD 129 |
diff --git a/drivers/video/omap/lcd_omap3beagle.c b/drivers/video/omap/lcd_omap3beagle.c index ccec084ed647..fc503d8f3c24 100644 --- a/drivers/video/omap/lcd_omap3beagle.c +++ b/drivers/video/omap/lcd_omap3beagle.c | |||
@@ -26,9 +26,11 @@ | |||
26 | #include <linux/i2c/twl4030.h> | 26 | #include <linux/i2c/twl4030.h> |
27 | 27 | ||
28 | #include <plat/mux.h> | 28 | #include <plat/mux.h> |
29 | #include <plat/omapfb.h> | 29 | #include <plat/mux.h> |
30 | #include <asm/mach-types.h> | 30 | #include <asm/mach-types.h> |
31 | 31 | ||
32 | #include "omapfb.h" | ||
33 | |||
32 | #define LCD_PANEL_ENABLE_GPIO 170 | 34 | #define LCD_PANEL_ENABLE_GPIO 170 |
33 | 35 | ||
34 | static int omap3beagle_panel_init(struct lcd_panel *panel, | 36 | static int omap3beagle_panel_init(struct lcd_panel *panel, |
diff --git a/drivers/video/omap/lcd_omap3evm.c b/drivers/video/omap/lcd_omap3evm.c index 556eb31db24c..ae2edc4081a8 100644 --- a/drivers/video/omap/lcd_omap3evm.c +++ b/drivers/video/omap/lcd_omap3evm.c | |||
@@ -26,9 +26,10 @@ | |||
26 | #include <linux/i2c/twl4030.h> | 26 | #include <linux/i2c/twl4030.h> |
27 | 27 | ||
28 | #include <plat/mux.h> | 28 | #include <plat/mux.h> |
29 | #include <plat/omapfb.h> | ||
30 | #include <asm/mach-types.h> | 29 | #include <asm/mach-types.h> |
31 | 30 | ||
31 | #include "omapfb.h" | ||
32 | |||
32 | #define LCD_PANEL_ENABLE_GPIO 153 | 33 | #define LCD_PANEL_ENABLE_GPIO 153 |
33 | #define LCD_PANEL_LR 2 | 34 | #define LCD_PANEL_LR 2 |
34 | #define LCD_PANEL_UD 3 | 35 | #define LCD_PANEL_UD 3 |
diff --git a/drivers/video/omap/lcd_osk.c b/drivers/video/omap/lcd_osk.c index bb21d7dca39e..b87e8b83f29c 100644 --- a/drivers/video/omap/lcd_osk.c +++ b/drivers/video/omap/lcd_osk.c | |||
@@ -25,7 +25,7 @@ | |||
25 | 25 | ||
26 | #include <mach/gpio.h> | 26 | #include <mach/gpio.h> |
27 | #include <plat/mux.h> | 27 | #include <plat/mux.h> |
28 | #include <plat/omapfb.h> | 28 | #include "omapfb.h" |
29 | 29 | ||
30 | static int osk_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev) | 30 | static int osk_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev) |
31 | { | 31 | { |
diff --git a/drivers/video/omap/lcd_overo.c b/drivers/video/omap/lcd_overo.c index b0f86e514cde..56ee192e9ee2 100644 --- a/drivers/video/omap/lcd_overo.c +++ b/drivers/video/omap/lcd_overo.c | |||
@@ -25,9 +25,10 @@ | |||
25 | 25 | ||
26 | #include <mach/gpio.h> | 26 | #include <mach/gpio.h> |
27 | #include <plat/mux.h> | 27 | #include <plat/mux.h> |
28 | #include <plat/omapfb.h> | ||
29 | #include <asm/mach-types.h> | 28 | #include <asm/mach-types.h> |
30 | 29 | ||
30 | #include "omapfb.h" | ||
31 | |||
31 | #define LCD_ENABLE 144 | 32 | #define LCD_ENABLE 144 |
32 | 33 | ||
33 | static int overo_panel_init(struct lcd_panel *panel, | 34 | static int overo_panel_init(struct lcd_panel *panel, |
diff --git a/drivers/video/omap/lcd_palmte.c b/drivers/video/omap/lcd_palmte.c index d30289603ce8..4cb301750d02 100644 --- a/drivers/video/omap/lcd_palmte.c +++ b/drivers/video/omap/lcd_palmte.c | |||
@@ -24,7 +24,7 @@ | |||
24 | #include <linux/io.h> | 24 | #include <linux/io.h> |
25 | 25 | ||
26 | #include <plat/fpga.h> | 26 | #include <plat/fpga.h> |
27 | #include <plat/omapfb.h> | 27 | #include "omapfb.h" |
28 | 28 | ||
29 | static int palmte_panel_init(struct lcd_panel *panel, | 29 | static int palmte_panel_init(struct lcd_panel *panel, |
30 | struct omapfb_device *fbdev) | 30 | struct omapfb_device *fbdev) |
diff --git a/drivers/video/omap/lcd_palmtt.c b/drivers/video/omap/lcd_palmtt.c index 557424fb6df1..ff0e6d7ab3a2 100644 --- a/drivers/video/omap/lcd_palmtt.c +++ b/drivers/video/omap/lcd_palmtt.c | |||
@@ -30,7 +30,7 @@ GPIO13 - screen blanking | |||
30 | #include <linux/io.h> | 30 | #include <linux/io.h> |
31 | 31 | ||
32 | #include <mach/gpio.h> | 32 | #include <mach/gpio.h> |
33 | #include <plat/omapfb.h> | 33 | #include "omapfb.h" |
34 | 34 | ||
35 | static int palmtt_panel_init(struct lcd_panel *panel, | 35 | static int palmtt_panel_init(struct lcd_panel *panel, |
36 | struct omapfb_device *fbdev) | 36 | struct omapfb_device *fbdev) |
diff --git a/drivers/video/omap/lcd_palmz71.c b/drivers/video/omap/lcd_palmz71.c index 5f4b5b2c1f41..2334e56536bc 100644 --- a/drivers/video/omap/lcd_palmz71.c +++ b/drivers/video/omap/lcd_palmz71.c | |||
@@ -24,7 +24,7 @@ | |||
24 | #include <linux/platform_device.h> | 24 | #include <linux/platform_device.h> |
25 | #include <linux/io.h> | 25 | #include <linux/io.h> |
26 | 26 | ||
27 | #include <plat/omapfb.h> | 27 | #include "omapfb.h" |
28 | 28 | ||
29 | static int palmz71_panel_init(struct lcd_panel *panel, | 29 | static int palmz71_panel_init(struct lcd_panel *panel, |
30 | struct omapfb_device *fbdev) | 30 | struct omapfb_device *fbdev) |
diff --git a/drivers/video/omap/lcdc.c b/drivers/video/omap/lcdc.c index 5f32cafbf74c..b831e1df629e 100644 --- a/drivers/video/omap/lcdc.c +++ b/drivers/video/omap/lcdc.c | |||
@@ -30,10 +30,11 @@ | |||
30 | #include <linux/clk.h> | 30 | #include <linux/clk.h> |
31 | 31 | ||
32 | #include <plat/dma.h> | 32 | #include <plat/dma.h> |
33 | #include <plat/omapfb.h> | ||
34 | 33 | ||
35 | #include <asm/mach-types.h> | 34 | #include <asm/mach-types.h> |
36 | 35 | ||
36 | #include "omapfb.h" | ||
37 | |||
37 | #include "lcdc.h" | 38 | #include "lcdc.h" |
38 | 39 | ||
39 | #define MODULE_NAME "lcdc" | 40 | #define MODULE_NAME "lcdc" |
diff --git a/arch/arm/plat-omap/include/plat/omapfb.h b/drivers/video/omap/omapfb.h index bfef7ab95f17..46e4714014e8 100644 --- a/arch/arm/plat-omap/include/plat/omapfb.h +++ b/drivers/video/omap/omapfb.h | |||
@@ -1,5 +1,5 @@ | |||
1 | /* | 1 | /* |
2 | * File: arch/arm/plat-omap/include/mach/omapfb.h | 2 | * File: drivers/video/omap/omapfb.h |
3 | * | 3 | * |
4 | * Framebuffer driver for TI OMAP boards | 4 | * Framebuffer driver for TI OMAP boards |
5 | * | 5 | * |
@@ -24,151 +24,12 @@ | |||
24 | #ifndef __OMAPFB_H | 24 | #ifndef __OMAPFB_H |
25 | #define __OMAPFB_H | 25 | #define __OMAPFB_H |
26 | 26 | ||
27 | #include <asm/ioctl.h> | ||
28 | #include <asm/types.h> | ||
29 | |||
30 | /* IOCTL commands. */ | ||
31 | |||
32 | #define OMAP_IOW(num, dtype) _IOW('O', num, dtype) | ||
33 | #define OMAP_IOR(num, dtype) _IOR('O', num, dtype) | ||
34 | #define OMAP_IOWR(num, dtype) _IOWR('O', num, dtype) | ||
35 | #define OMAP_IO(num) _IO('O', num) | ||
36 | |||
37 | #define OMAPFB_MIRROR OMAP_IOW(31, int) | ||
38 | #define OMAPFB_SYNC_GFX OMAP_IO(37) | ||
39 | #define OMAPFB_VSYNC OMAP_IO(38) | ||
40 | #define OMAPFB_SET_UPDATE_MODE OMAP_IOW(40, int) | ||
41 | #define OMAPFB_GET_CAPS OMAP_IOR(42, struct omapfb_caps) | ||
42 | #define OMAPFB_GET_UPDATE_MODE OMAP_IOW(43, int) | ||
43 | #define OMAPFB_LCD_TEST OMAP_IOW(45, int) | ||
44 | #define OMAPFB_CTRL_TEST OMAP_IOW(46, int) | ||
45 | #define OMAPFB_UPDATE_WINDOW_OLD OMAP_IOW(47, struct omapfb_update_window_old) | ||
46 | #define OMAPFB_SET_COLOR_KEY OMAP_IOW(50, struct omapfb_color_key) | ||
47 | #define OMAPFB_GET_COLOR_KEY OMAP_IOW(51, struct omapfb_color_key) | ||
48 | #define OMAPFB_SETUP_PLANE OMAP_IOW(52, struct omapfb_plane_info) | ||
49 | #define OMAPFB_QUERY_PLANE OMAP_IOW(53, struct omapfb_plane_info) | ||
50 | #define OMAPFB_UPDATE_WINDOW OMAP_IOW(54, struct omapfb_update_window) | ||
51 | #define OMAPFB_SETUP_MEM OMAP_IOW(55, struct omapfb_mem_info) | ||
52 | #define OMAPFB_QUERY_MEM OMAP_IOW(56, struct omapfb_mem_info) | ||
53 | |||
54 | #define OMAPFB_CAPS_GENERIC_MASK 0x00000fff | ||
55 | #define OMAPFB_CAPS_LCDC_MASK 0x00fff000 | ||
56 | #define OMAPFB_CAPS_PANEL_MASK 0xff000000 | ||
57 | |||
58 | #define OMAPFB_CAPS_MANUAL_UPDATE 0x00001000 | ||
59 | #define OMAPFB_CAPS_TEARSYNC 0x00002000 | ||
60 | #define OMAPFB_CAPS_PLANE_RELOCATE_MEM 0x00004000 | ||
61 | #define OMAPFB_CAPS_PLANE_SCALE 0x00008000 | ||
62 | #define OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE 0x00010000 | ||
63 | #define OMAPFB_CAPS_WINDOW_SCALE 0x00020000 | ||
64 | #define OMAPFB_CAPS_WINDOW_OVERLAY 0x00040000 | ||
65 | #define OMAPFB_CAPS_WINDOW_ROTATE 0x00080000 | ||
66 | #define OMAPFB_CAPS_SET_BACKLIGHT 0x01000000 | ||
67 | |||
68 | /* Values from DSP must map to lower 16-bits */ | ||
69 | #define OMAPFB_FORMAT_MASK 0x00ff | ||
70 | #define OMAPFB_FORMAT_FLAG_DOUBLE 0x0100 | ||
71 | #define OMAPFB_FORMAT_FLAG_TEARSYNC 0x0200 | ||
72 | #define OMAPFB_FORMAT_FLAG_FORCE_VSYNC 0x0400 | ||
73 | #define OMAPFB_FORMAT_FLAG_ENABLE_OVERLAY 0x0800 | ||
74 | #define OMAPFB_FORMAT_FLAG_DISABLE_OVERLAY 0x1000 | ||
75 | |||
76 | #define OMAPFB_EVENT_READY 1 | ||
77 | #define OMAPFB_EVENT_DISABLED 2 | ||
78 | |||
79 | #define OMAPFB_MEMTYPE_SDRAM 0 | ||
80 | #define OMAPFB_MEMTYPE_SRAM 1 | ||
81 | #define OMAPFB_MEMTYPE_MAX 1 | ||
82 | |||
83 | enum omapfb_color_format { | ||
84 | OMAPFB_COLOR_RGB565 = 0, | ||
85 | OMAPFB_COLOR_YUV422, | ||
86 | OMAPFB_COLOR_YUV420, | ||
87 | OMAPFB_COLOR_CLUT_8BPP, | ||
88 | OMAPFB_COLOR_CLUT_4BPP, | ||
89 | OMAPFB_COLOR_CLUT_2BPP, | ||
90 | OMAPFB_COLOR_CLUT_1BPP, | ||
91 | OMAPFB_COLOR_RGB444, | ||
92 | OMAPFB_COLOR_YUY422, | ||
93 | }; | ||
94 | |||
95 | struct omapfb_update_window { | ||
96 | __u32 x, y; | ||
97 | __u32 width, height; | ||
98 | __u32 format; | ||
99 | __u32 out_x, out_y; | ||
100 | __u32 out_width, out_height; | ||
101 | __u32 reserved[8]; | ||
102 | }; | ||
103 | |||
104 | struct omapfb_update_window_old { | ||
105 | __u32 x, y; | ||
106 | __u32 width, height; | ||
107 | __u32 format; | ||
108 | }; | ||
109 | |||
110 | enum omapfb_plane { | ||
111 | OMAPFB_PLANE_GFX = 0, | ||
112 | OMAPFB_PLANE_VID1, | ||
113 | OMAPFB_PLANE_VID2, | ||
114 | }; | ||
115 | |||
116 | enum omapfb_channel_out { | ||
117 | OMAPFB_CHANNEL_OUT_LCD = 0, | ||
118 | OMAPFB_CHANNEL_OUT_DIGIT, | ||
119 | }; | ||
120 | |||
121 | struct omapfb_plane_info { | ||
122 | __u32 pos_x; | ||
123 | __u32 pos_y; | ||
124 | __u8 enabled; | ||
125 | __u8 channel_out; | ||
126 | __u8 mirror; | ||
127 | __u8 reserved1; | ||
128 | __u32 out_width; | ||
129 | __u32 out_height; | ||
130 | __u32 reserved2[12]; | ||
131 | }; | ||
132 | |||
133 | struct omapfb_mem_info { | ||
134 | __u32 size; | ||
135 | __u8 type; | ||
136 | __u8 reserved[3]; | ||
137 | }; | ||
138 | |||
139 | struct omapfb_caps { | ||
140 | __u32 ctrl; | ||
141 | __u32 plane_color; | ||
142 | __u32 wnd_color; | ||
143 | }; | ||
144 | |||
145 | enum omapfb_color_key_type { | ||
146 | OMAPFB_COLOR_KEY_DISABLED = 0, | ||
147 | OMAPFB_COLOR_KEY_GFX_DST, | ||
148 | OMAPFB_COLOR_KEY_VID_SRC, | ||
149 | }; | ||
150 | |||
151 | struct omapfb_color_key { | ||
152 | __u8 channel_out; | ||
153 | __u32 background; | ||
154 | __u32 trans_key; | ||
155 | __u8 key_type; | ||
156 | }; | ||
157 | |||
158 | enum omapfb_update_mode { | ||
159 | OMAPFB_UPDATE_DISABLED = 0, | ||
160 | OMAPFB_AUTO_UPDATE, | ||
161 | OMAPFB_MANUAL_UPDATE | ||
162 | }; | ||
163 | |||
164 | #ifdef __KERNEL__ | ||
165 | |||
166 | #include <linux/completion.h> | ||
167 | #include <linux/interrupt.h> | ||
168 | #include <linux/fb.h> | 27 | #include <linux/fb.h> |
169 | #include <linux/mutex.h> | 28 | #include <linux/mutex.h> |
29 | #include <linux/omapfb.h> | ||
170 | 30 | ||
171 | #include <plat/board.h> | 31 | #define OMAPFB_EVENT_READY 1 |
32 | #define OMAPFB_EVENT_DISABLED 2 | ||
172 | 33 | ||
173 | #define OMAP_LCDC_INV_VSYNC 0x0001 | 34 | #define OMAP_LCDC_INV_VSYNC 0x0001 |
174 | #define OMAP_LCDC_INV_HSYNC 0x0002 | 35 | #define OMAP_LCDC_INV_HSYNC 0x0002 |
@@ -184,12 +45,6 @@ enum omapfb_update_mode { | |||
184 | #define OMAPFB_PLANE_XRES_MIN 8 | 45 | #define OMAPFB_PLANE_XRES_MIN 8 |
185 | #define OMAPFB_PLANE_YRES_MIN 8 | 46 | #define OMAPFB_PLANE_YRES_MIN 8 |
186 | 47 | ||
187 | #ifdef CONFIG_ARCH_OMAP1 | ||
188 | #define OMAPFB_PLANE_NUM 1 | ||
189 | #else | ||
190 | #define OMAPFB_PLANE_NUM 3 | ||
191 | #endif | ||
192 | |||
193 | struct omapfb_device; | 48 | struct omapfb_device; |
194 | 49 | ||
195 | struct lcd_panel { | 50 | struct lcd_panel { |
@@ -256,7 +111,7 @@ struct lcd_ctrl_extif { | |||
256 | void (*read_data) (void *buf, unsigned int len); | 111 | void (*read_data) (void *buf, unsigned int len); |
257 | void (*write_data) (const void *buf, unsigned int len); | 112 | void (*write_data) (const void *buf, unsigned int len); |
258 | void (*transfer_area) (int width, int height, | 113 | void (*transfer_area) (int width, int height, |
259 | void (callback)(void * data), void *data); | 114 | void (callback)(void *data), void *data); |
260 | int (*setup_tearsync) (unsigned pin_cnt, | 115 | int (*setup_tearsync) (unsigned pin_cnt, |
261 | unsigned hs_pulse_time, unsigned vs_pulse_time, | 116 | unsigned hs_pulse_time, unsigned vs_pulse_time, |
262 | int hs_pol_inv, int vs_pol_inv, int div); | 117 | int hs_pol_inv, int vs_pol_inv, int div); |
@@ -275,20 +130,6 @@ typedef int (*omapfb_notifier_callback_t)(struct notifier_block *, | |||
275 | unsigned long event, | 130 | unsigned long event, |
276 | void *fbi); | 131 | void *fbi); |
277 | 132 | ||
278 | struct omapfb_mem_region { | ||
279 | u32 paddr; | ||
280 | void __iomem *vaddr; | ||
281 | unsigned long size; | ||
282 | u8 type; /* OMAPFB_PLANE_MEM_* */ | ||
283 | unsigned alloc:1; /* allocated by the driver */ | ||
284 | unsigned map:1; /* kernel mapped by the driver */ | ||
285 | }; | ||
286 | |||
287 | struct omapfb_mem_desc { | ||
288 | int region_cnt; | ||
289 | struct omapfb_mem_region region[OMAPFB_PLANE_NUM]; | ||
290 | }; | ||
291 | |||
292 | struct lcd_ctrl { | 133 | struct lcd_ctrl { |
293 | const char *name; | 134 | const char *name; |
294 | void *data; | 135 | void *data; |
@@ -331,9 +172,9 @@ struct lcd_ctrl { | |||
331 | }; | 172 | }; |
332 | 173 | ||
333 | enum omapfb_state { | 174 | enum omapfb_state { |
334 | OMAPFB_DISABLED = 0, | 175 | OMAPFB_DISABLED = 0, |
335 | OMAPFB_SUSPENDED= 99, | 176 | OMAPFB_SUSPENDED = 99, |
336 | OMAPFB_ACTIVE = 100 | 177 | OMAPFB_ACTIVE = 100 |
337 | }; | 178 | }; |
338 | 179 | ||
339 | struct omapfb_plane_struct { | 180 | struct omapfb_plane_struct { |
@@ -345,8 +186,8 @@ struct omapfb_plane_struct { | |||
345 | 186 | ||
346 | struct omapfb_device { | 187 | struct omapfb_device { |
347 | int state; | 188 | int state; |
348 | int ext_lcdc; /* Using external | 189 | int ext_lcdc; /* Using external |
349 | LCD controller */ | 190 | LCD controller */ |
350 | struct mutex rqueue_mutex; | 191 | struct mutex rqueue_mutex; |
351 | 192 | ||
352 | int palette_size; | 193 | int palette_size; |
@@ -364,19 +205,12 @@ struct omapfb_device { | |||
364 | struct fb_info *fb_info[OMAPFB_PLANE_NUM]; | 205 | struct fb_info *fb_info[OMAPFB_PLANE_NUM]; |
365 | }; | 206 | }; |
366 | 207 | ||
367 | struct omapfb_platform_data { | ||
368 | struct omap_lcd_config lcd; | ||
369 | struct omapfb_mem_desc mem_desc; | ||
370 | void *ctrl_platform_data; | ||
371 | }; | ||
372 | |||
373 | #ifdef CONFIG_ARCH_OMAP1 | 208 | #ifdef CONFIG_ARCH_OMAP1 |
374 | extern struct lcd_ctrl omap1_lcd_ctrl; | 209 | extern struct lcd_ctrl omap1_lcd_ctrl; |
375 | #else | 210 | #else |
376 | extern struct lcd_ctrl omap2_disp_ctrl; | 211 | extern struct lcd_ctrl omap2_disp_ctrl; |
377 | #endif | 212 | #endif |
378 | 213 | ||
379 | extern void omapfb_reserve_sdram(void); | ||
380 | extern void omapfb_register_panel(struct lcd_panel *panel); | 214 | extern void omapfb_register_panel(struct lcd_panel *panel); |
381 | extern void omapfb_write_first_pixel(struct omapfb_device *fbdev, u16 pixval); | 215 | extern void omapfb_write_first_pixel(struct omapfb_device *fbdev, u16 pixval); |
382 | extern void omapfb_notify_clients(struct omapfb_device *fbdev, | 216 | extern void omapfb_notify_clients(struct omapfb_device *fbdev, |
@@ -390,9 +224,4 @@ extern int omapfb_update_window_async(struct fb_info *fbi, | |||
390 | void (*callback)(void *), | 224 | void (*callback)(void *), |
391 | void *callback_data); | 225 | void *callback_data); |
392 | 226 | ||
393 | /* in arch/arm/plat-omap/fb.c */ | ||
394 | extern void omapfb_set_ctrl_platform_data(void *pdata); | ||
395 | |||
396 | #endif /* __KERNEL__ */ | ||
397 | |||
398 | #endif /* __OMAPFB_H */ | 227 | #endif /* __OMAPFB_H */ |
diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/omap/omapfb_main.c index f900a43db8d7..c7f59a5ccdbc 100644 --- a/drivers/video/omap/omapfb_main.c +++ b/drivers/video/omap/omapfb_main.c | |||
@@ -29,8 +29,8 @@ | |||
29 | #include <linux/uaccess.h> | 29 | #include <linux/uaccess.h> |
30 | 30 | ||
31 | #include <plat/dma.h> | 31 | #include <plat/dma.h> |
32 | #include <plat/omapfb.h> | ||
33 | 32 | ||
33 | #include "omapfb.h" | ||
34 | #include "lcdc.h" | 34 | #include "lcdc.h" |
35 | #include "dispc.h" | 35 | #include "dispc.h" |
36 | 36 | ||
diff --git a/drivers/video/omap/rfbi.c b/drivers/video/omap/rfbi.c index c90fa39486b4..fed7b1bda19c 100644 --- a/drivers/video/omap/rfbi.c +++ b/drivers/video/omap/rfbi.c | |||
@@ -27,8 +27,7 @@ | |||
27 | #include <linux/clk.h> | 27 | #include <linux/clk.h> |
28 | #include <linux/io.h> | 28 | #include <linux/io.h> |
29 | 29 | ||
30 | #include <plat/omapfb.h> | 30 | #include "omapfb.h" |
31 | |||
32 | #include "dispc.h" | 31 | #include "dispc.h" |
33 | 32 | ||
34 | /* To work around an RFBI transfer rate limitation */ | 33 | /* To work around an RFBI transfer rate limitation */ |
diff --git a/drivers/video/omap/sossi.c b/drivers/video/omap/sossi.c index 79dc84f09713..8fb7c708f563 100644 --- a/drivers/video/omap/sossi.c +++ b/drivers/video/omap/sossi.c | |||
@@ -23,10 +23,11 @@ | |||
23 | #include <linux/clk.h> | 23 | #include <linux/clk.h> |
24 | #include <linux/irq.h> | 24 | #include <linux/irq.h> |
25 | #include <linux/io.h> | 25 | #include <linux/io.h> |
26 | #include <linux/interrupt.h> | ||
26 | 27 | ||
27 | #include <plat/dma.h> | 28 | #include <plat/dma.h> |
28 | #include <plat/omapfb.h> | ||
29 | 29 | ||
30 | #include "omapfb.h" | ||
30 | #include "lcdc.h" | 31 | #include "lcdc.h" |
31 | 32 | ||
32 | #define MODULE_NAME "omapfb-sossi" | 33 | #define MODULE_NAME "omapfb-sossi" |
diff --git a/drivers/video/omap2/Kconfig b/drivers/video/omap2/Kconfig new file mode 100644 index 000000000000..d877c361abda --- /dev/null +++ b/drivers/video/omap2/Kconfig | |||
@@ -0,0 +1,9 @@ | |||
1 | config OMAP2_VRAM | ||
2 | bool | ||
3 | |||
4 | config OMAP2_VRFB | ||
5 | bool | ||
6 | |||
7 | source "drivers/video/omap2/dss/Kconfig" | ||
8 | source "drivers/video/omap2/omapfb/Kconfig" | ||
9 | source "drivers/video/omap2/displays/Kconfig" | ||
diff --git a/drivers/video/omap2/Makefile b/drivers/video/omap2/Makefile new file mode 100644 index 000000000000..d853d05dad31 --- /dev/null +++ b/drivers/video/omap2/Makefile | |||
@@ -0,0 +1,6 @@ | |||
1 | obj-$(CONFIG_OMAP2_VRAM) += vram.o | ||
2 | obj-$(CONFIG_OMAP2_VRFB) += vrfb.o | ||
3 | |||
4 | obj-y += dss/ | ||
5 | obj-y += omapfb/ | ||
6 | obj-y += displays/ | ||
diff --git a/drivers/video/omap2/displays/Kconfig b/drivers/video/omap2/displays/Kconfig new file mode 100644 index 000000000000..b12a59c9c50a --- /dev/null +++ b/drivers/video/omap2/displays/Kconfig | |||
@@ -0,0 +1,22 @@ | |||
1 | menu "OMAP2/3 Display Device Drivers" | ||
2 | depends on OMAP2_DSS | ||
3 | |||
4 | config PANEL_GENERIC | ||
5 | tristate "Generic Panel" | ||
6 | help | ||
7 | Generic panel driver. | ||
8 | Used for DVI output for Beagle and OMAP3 SDP. | ||
9 | |||
10 | config PANEL_SHARP_LS037V7DW01 | ||
11 | tristate "Sharp LS037V7DW01 LCD Panel" | ||
12 | depends on OMAP2_DSS | ||
13 | help | ||
14 | LCD Panel used in TI's SDP3430 and EVM boards | ||
15 | |||
16 | config PANEL_TAAL | ||
17 | tristate "Taal DSI Panel" | ||
18 | depends on OMAP2_DSS_DSI | ||
19 | help | ||
20 | Taal DSI command mode panel from TPO. | ||
21 | |||
22 | endmenu | ||
diff --git a/drivers/video/omap2/displays/Makefile b/drivers/video/omap2/displays/Makefile new file mode 100644 index 000000000000..955646440b3a --- /dev/null +++ b/drivers/video/omap2/displays/Makefile | |||
@@ -0,0 +1,4 @@ | |||
1 | obj-$(CONFIG_PANEL_GENERIC) += panel-generic.o | ||
2 | obj-$(CONFIG_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o | ||
3 | |||
4 | obj-$(CONFIG_PANEL_TAAL) += panel-taal.o | ||
diff --git a/drivers/video/omap2/displays/panel-generic.c b/drivers/video/omap2/displays/panel-generic.c new file mode 100644 index 000000000000..eb48d1afd800 --- /dev/null +++ b/drivers/video/omap2/displays/panel-generic.c | |||
@@ -0,0 +1,104 @@ | |||
1 | /* | ||
2 | * Generic panel support | ||
3 | * | ||
4 | * Copyright (C) 2008 Nokia Corporation | ||
5 | * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> | ||
6 | * | ||
7 | * This program is free software; you can redistribute it and/or modify it | ||
8 | * under the terms of the GNU General Public License version 2 as published by | ||
9 | * the Free Software Foundation. | ||
10 | * | ||
11 | * This program is distributed in the hope that it will be useful, but WITHOUT | ||
12 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | ||
13 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for | ||
14 | * more details. | ||
15 | * | ||
16 | * You should have received a copy of the GNU General Public License along with | ||
17 | * this program. If not, see <http://www.gnu.org/licenses/>. | ||
18 | */ | ||
19 | |||
20 | #include <linux/module.h> | ||
21 | #include <linux/delay.h> | ||
22 | |||
23 | #include <plat/display.h> | ||
24 | |||
25 | static struct omap_video_timings generic_panel_timings = { | ||
26 | /* 640 x 480 @ 60 Hz Reduced blanking VESA CVT 0.31M3-R */ | ||
27 | .x_res = 640, | ||
28 | .y_res = 480, | ||
29 | .pixel_clock = 23500, | ||
30 | .hfp = 48, | ||
31 | .hsw = 32, | ||
32 | .hbp = 80, | ||
33 | .vfp = 3, | ||
34 | .vsw = 4, | ||
35 | .vbp = 7, | ||
36 | }; | ||
37 | |||
38 | static int generic_panel_probe(struct omap_dss_device *dssdev) | ||
39 | { | ||
40 | dssdev->panel.config = OMAP_DSS_LCD_TFT; | ||
41 | dssdev->panel.timings = generic_panel_timings; | ||
42 | |||
43 | return 0; | ||
44 | } | ||
45 | |||
46 | static void generic_panel_remove(struct omap_dss_device *dssdev) | ||
47 | { | ||
48 | } | ||
49 | |||
50 | static int generic_panel_enable(struct omap_dss_device *dssdev) | ||
51 | { | ||
52 | int r = 0; | ||
53 | |||
54 | if (dssdev->platform_enable) | ||
55 | r = dssdev->platform_enable(dssdev); | ||
56 | |||
57 | return r; | ||
58 | } | ||
59 | |||
60 | static void generic_panel_disable(struct omap_dss_device *dssdev) | ||
61 | { | ||
62 | if (dssdev->platform_disable) | ||
63 | dssdev->platform_disable(dssdev); | ||
64 | } | ||
65 | |||
66 | static int generic_panel_suspend(struct omap_dss_device *dssdev) | ||
67 | { | ||
68 | generic_panel_disable(dssdev); | ||
69 | return 0; | ||
70 | } | ||
71 | |||
72 | static int generic_panel_resume(struct omap_dss_device *dssdev) | ||
73 | { | ||
74 | return generic_panel_enable(dssdev); | ||
75 | } | ||
76 | |||
77 | static struct omap_dss_driver generic_driver = { | ||
78 | .probe = generic_panel_probe, | ||
79 | .remove = generic_panel_remove, | ||
80 | |||
81 | .enable = generic_panel_enable, | ||
82 | .disable = generic_panel_disable, | ||
83 | .suspend = generic_panel_suspend, | ||
84 | .resume = generic_panel_resume, | ||
85 | |||
86 | .driver = { | ||
87 | .name = "generic_panel", | ||
88 | .owner = THIS_MODULE, | ||
89 | }, | ||
90 | }; | ||
91 | |||
92 | static int __init generic_panel_drv_init(void) | ||
93 | { | ||
94 | return omap_dss_register_driver(&generic_driver); | ||
95 | } | ||
96 | |||
97 | static void __exit generic_panel_drv_exit(void) | ||
98 | { | ||
99 | omap_dss_unregister_driver(&generic_driver); | ||
100 | } | ||
101 | |||
102 | module_init(generic_panel_drv_init); | ||
103 | module_exit(generic_panel_drv_exit); | ||
104 | MODULE_LICENSE("GPL"); | ||
diff --git a/drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c b/drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c new file mode 100644 index 000000000000..bbe880bbe795 --- /dev/null +++ b/drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c | |||
@@ -0,0 +1,153 @@ | |||
1 | /* | ||
2 | * LCD panel driver for Sharp LS037V7DW01 | ||
3 | * | ||
4 | * Copyright (C) 2008 Nokia Corporation | ||
5 | * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> | ||
6 | * | ||
7 | * This program is free software; you can redistribute it and/or modify it | ||
8 | * under the terms of the GNU General Public License version 2 as published by | ||
9 | * the Free Software Foundation. | ||
10 | * | ||
11 | * This program is distributed in the hope that it will be useful, but WITHOUT | ||
12 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | ||
13 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for | ||
14 | * more details. | ||
15 | * | ||
16 | * You should have received a copy of the GNU General Public License along with | ||
17 | * this program. If not, see <http://www.gnu.org/licenses/>. | ||
18 | */ | ||
19 | |||
20 | #include <linux/module.h> | ||
21 | #include <linux/delay.h> | ||
22 | #include <linux/device.h> | ||
23 | #include <linux/regulator/consumer.h> | ||
24 | #include <linux/err.h> | ||
25 | |||
26 | #include <plat/display.h> | ||
27 | |||
28 | struct sharp_data { | ||
29 | /* XXX This regulator should actually be in SDP board file, not here, | ||
30 | * as it doesn't actually power the LCD, but something else that | ||
31 | * affects the output to LCD (I think. Somebody clarify). It doesn't do | ||
32 | * harm here, as SDP is the only board using this currently */ | ||
33 | struct regulator *vdvi_reg; | ||
34 | }; | ||
35 | |||
36 | static struct omap_video_timings sharp_ls_timings = { | ||
37 | .x_res = 480, | ||
38 | .y_res = 640, | ||
39 | |||
40 | .pixel_clock = 19200, | ||
41 | |||
42 | .hsw = 2, | ||
43 | .hfp = 1, | ||
44 | .hbp = 28, | ||
45 | |||
46 | .vsw = 1, | ||
47 | .vfp = 1, | ||
48 | .vbp = 1, | ||
49 | }; | ||
50 | |||
51 | static int sharp_ls_panel_probe(struct omap_dss_device *dssdev) | ||
52 | { | ||
53 | struct sharp_data *sd; | ||
54 | |||
55 | dssdev->panel.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS | | ||
56 | OMAP_DSS_LCD_IHS; | ||
57 | dssdev->panel.acb = 0x28; | ||
58 | dssdev->panel.timings = sharp_ls_timings; | ||
59 | |||
60 | sd = kzalloc(sizeof(*sd), GFP_KERNEL); | ||
61 | if (!sd) | ||
62 | return -ENOMEM; | ||
63 | |||
64 | dev_set_drvdata(&dssdev->dev, sd); | ||
65 | |||
66 | sd->vdvi_reg = regulator_get(&dssdev->dev, "vdvi"); | ||
67 | if (IS_ERR(sd->vdvi_reg)) { | ||
68 | kfree(sd); | ||
69 | pr_err("failed to get VDVI regulator\n"); | ||
70 | return PTR_ERR(sd->vdvi_reg); | ||
71 | } | ||
72 | |||
73 | return 0; | ||
74 | } | ||
75 | |||
76 | static void sharp_ls_panel_remove(struct omap_dss_device *dssdev) | ||
77 | { | ||
78 | struct sharp_data *sd = dev_get_drvdata(&dssdev->dev); | ||
79 | |||
80 | regulator_put(sd->vdvi_reg); | ||
81 | |||
82 | kfree(sd); | ||
83 | } | ||
84 | |||
85 | static int sharp_ls_panel_enable(struct omap_dss_device *dssdev) | ||
86 | { | ||
87 | struct sharp_data *sd = dev_get_drvdata(&dssdev->dev); | ||
88 | int r = 0; | ||
89 | |||
90 | /* wait couple of vsyncs until enabling the LCD */ | ||
91 | msleep(50); | ||
92 | |||
93 | regulator_enable(sd->vdvi_reg); | ||
94 | |||
95 | if (dssdev->platform_enable) | ||
96 | r = dssdev->platform_enable(dssdev); | ||
97 | |||
98 | return r; | ||
99 | } | ||
100 | |||
101 | static void sharp_ls_panel_disable(struct omap_dss_device *dssdev) | ||
102 | { | ||
103 | struct sharp_data *sd = dev_get_drvdata(&dssdev->dev); | ||
104 | |||
105 | if (dssdev->platform_disable) | ||
106 | dssdev->platform_disable(dssdev); | ||
107 | |||
108 | regulator_disable(sd->vdvi_reg); | ||
109 | |||
110 | /* wait at least 5 vsyncs after disabling the LCD */ | ||
111 | |||
112 | msleep(100); | ||
113 | } | ||
114 | |||
115 | static int sharp_ls_panel_suspend(struct omap_dss_device *dssdev) | ||
116 | { | ||
117 | sharp_ls_panel_disable(dssdev); | ||
118 | return 0; | ||
119 | } | ||
120 | |||
121 | static int sharp_ls_panel_resume(struct omap_dss_device *dssdev) | ||
122 | { | ||
123 | return sharp_ls_panel_enable(dssdev); | ||
124 | } | ||
125 | |||
126 | static struct omap_dss_driver sharp_ls_driver = { | ||
127 | .probe = sharp_ls_panel_probe, | ||
128 | .remove = sharp_ls_panel_remove, | ||
129 | |||
130 | .enable = sharp_ls_panel_enable, | ||
131 | .disable = sharp_ls_panel_disable, | ||
132 | .suspend = sharp_ls_panel_suspend, | ||
133 | .resume = sharp_ls_panel_resume, | ||
134 | |||
135 | .driver = { | ||
136 | .name = "sharp_ls_panel", | ||
137 | .owner = THIS_MODULE, | ||
138 | }, | ||
139 | }; | ||
140 | |||
141 | static int __init sharp_ls_panel_drv_init(void) | ||
142 | { | ||
143 | return omap_dss_register_driver(&sharp_ls_driver); | ||
144 | } | ||
145 | |||
146 | static void __exit sharp_ls_panel_drv_exit(void) | ||
147 | { | ||
148 | omap_dss_unregister_driver(&sharp_ls_driver); | ||
149 | } | ||
150 | |||
151 | module_init(sharp_ls_panel_drv_init); | ||
152 | module_exit(sharp_ls_panel_drv_exit); | ||
153 | MODULE_LICENSE("GPL"); | ||
diff --git a/drivers/video/omap2/displays/panel-taal.c b/drivers/video/omap2/displays/panel-taal.c new file mode 100644 index 000000000000..1f01dfc5e52e --- /dev/null +++ b/drivers/video/omap2/displays/panel-taal.c | |||
@@ -0,0 +1,1003 @@ | |||
1 | /* | ||
2 | * Taal DSI command mode panel | ||
3 | * | ||
4 | * Copyright (C) 2009 Nokia Corporation | ||
5 | * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> | ||
6 | * | ||
7 | * This program is free software; you can redistribute it and/or modify it | ||
8 | * under the terms of the GNU General Public License version 2 as published by | ||
9 | * the Free Software Foundation. | ||
10 | * | ||
11 | * This program is distributed in the hope that it will be useful, but WITHOUT | ||
12 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | ||
13 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for | ||
14 | * more details. | ||
15 | * | ||
16 | * You should have received a copy of the GNU General Public License along with | ||
17 | * this program. If not, see <http://www.gnu.org/licenses/>. | ||
18 | */ | ||
19 | |||
20 | /*#define DEBUG*/ | ||
21 | |||
22 | #include <linux/module.h> | ||
23 | #include <linux/delay.h> | ||
24 | #include <linux/err.h> | ||
25 | #include <linux/jiffies.h> | ||
26 | #include <linux/sched.h> | ||
27 | #include <linux/backlight.h> | ||
28 | #include <linux/fb.h> | ||
29 | #include <linux/interrupt.h> | ||
30 | #include <linux/gpio.h> | ||
31 | #include <linux/completion.h> | ||
32 | #include <linux/workqueue.h> | ||
33 | |||
34 | #include <plat/display.h> | ||
35 | |||
36 | /* DSI Virtual channel. Hardcoded for now. */ | ||
37 | #define TCH 0 | ||
38 | |||
39 | #define DCS_READ_NUM_ERRORS 0x05 | ||
40 | #define DCS_READ_POWER_MODE 0x0a | ||
41 | #define DCS_READ_MADCTL 0x0b | ||
42 | #define DCS_READ_PIXEL_FORMAT 0x0c | ||
43 | #define DCS_RDDSDR 0x0f | ||
44 | #define DCS_SLEEP_IN 0x10 | ||
45 | #define DCS_SLEEP_OUT 0x11 | ||
46 | #define DCS_DISPLAY_OFF 0x28 | ||
47 | #define DCS_DISPLAY_ON 0x29 | ||
48 | #define DCS_COLUMN_ADDR 0x2a | ||
49 | #define DCS_PAGE_ADDR 0x2b | ||
50 | #define DCS_MEMORY_WRITE 0x2c | ||
51 | #define DCS_TEAR_OFF 0x34 | ||
52 | #define DCS_TEAR_ON 0x35 | ||
53 | #define DCS_MEM_ACC_CTRL 0x36 | ||
54 | #define DCS_PIXEL_FORMAT 0x3a | ||
55 | #define DCS_BRIGHTNESS 0x51 | ||
56 | #define DCS_CTRL_DISPLAY 0x53 | ||
57 | #define DCS_WRITE_CABC 0x55 | ||
58 | #define DCS_READ_CABC 0x56 | ||
59 | #define DCS_GET_ID1 0xda | ||
60 | #define DCS_GET_ID2 0xdb | ||
61 | #define DCS_GET_ID3 0xdc | ||
62 | |||
63 | /* #define TAAL_USE_ESD_CHECK */ | ||
64 | #define TAAL_ESD_CHECK_PERIOD msecs_to_jiffies(5000) | ||
65 | |||
66 | struct taal_data { | ||
67 | struct backlight_device *bldev; | ||
68 | |||
69 | unsigned long hw_guard_end; /* next value of jiffies when we can | ||
70 | * issue the next sleep in/out command | ||
71 | */ | ||
72 | unsigned long hw_guard_wait; /* max guard time in jiffies */ | ||
73 | |||
74 | struct omap_dss_device *dssdev; | ||
75 | |||
76 | bool enabled; | ||
77 | u8 rotate; | ||
78 | bool mirror; | ||
79 | |||
80 | bool te_enabled; | ||
81 | bool use_ext_te; | ||
82 | struct completion te_completion; | ||
83 | |||
84 | bool use_dsi_bl; | ||
85 | |||
86 | bool cabc_broken; | ||
87 | unsigned cabc_mode; | ||
88 | |||
89 | bool intro_printed; | ||
90 | |||
91 | struct workqueue_struct *esd_wq; | ||
92 | struct delayed_work esd_work; | ||
93 | }; | ||
94 | |||
95 | static void taal_esd_work(struct work_struct *work); | ||
96 | |||
97 | static void hw_guard_start(struct taal_data *td, int guard_msec) | ||
98 | { | ||
99 | td->hw_guard_wait = msecs_to_jiffies(guard_msec); | ||
100 | td->hw_guard_end = jiffies + td->hw_guard_wait; | ||
101 | } | ||
102 | |||
103 | static void hw_guard_wait(struct taal_data *td) | ||
104 | { | ||
105 | unsigned long wait = td->hw_guard_end - jiffies; | ||
106 | |||
107 | if ((long)wait > 0 && wait <= td->hw_guard_wait) { | ||
108 | set_current_state(TASK_UNINTERRUPTIBLE); | ||
109 | schedule_timeout(wait); | ||
110 | } | ||
111 | } | ||
112 | |||
113 | static int taal_dcs_read_1(u8 dcs_cmd, u8 *data) | ||
114 | { | ||
115 | int r; | ||
116 | u8 buf[1]; | ||
117 | |||
118 | r = dsi_vc_dcs_read(TCH, dcs_cmd, buf, 1); | ||
119 | |||
120 | if (r < 0) | ||
121 | return r; | ||
122 | |||
123 | *data = buf[0]; | ||
124 | |||
125 | return 0; | ||
126 | } | ||
127 | |||
128 | static int taal_dcs_write_0(u8 dcs_cmd) | ||
129 | { | ||
130 | return dsi_vc_dcs_write(TCH, &dcs_cmd, 1); | ||
131 | } | ||
132 | |||
133 | static int taal_dcs_write_1(u8 dcs_cmd, u8 param) | ||
134 | { | ||
135 | u8 buf[2]; | ||
136 | buf[0] = dcs_cmd; | ||
137 | buf[1] = param; | ||
138 | return dsi_vc_dcs_write(TCH, buf, 2); | ||
139 | } | ||
140 | |||
141 | static int taal_sleep_in(struct taal_data *td) | ||
142 | |||
143 | { | ||
144 | u8 cmd; | ||
145 | int r; | ||
146 | |||
147 | hw_guard_wait(td); | ||
148 | |||
149 | cmd = DCS_SLEEP_IN; | ||
150 | r = dsi_vc_dcs_write_nosync(TCH, &cmd, 1); | ||
151 | if (r) | ||
152 | return r; | ||
153 | |||
154 | hw_guard_start(td, 120); | ||
155 | |||
156 | msleep(5); | ||
157 | |||
158 | return 0; | ||
159 | } | ||
160 | |||
161 | static int taal_sleep_out(struct taal_data *td) | ||
162 | { | ||
163 | int r; | ||
164 | |||
165 | hw_guard_wait(td); | ||
166 | |||
167 | r = taal_dcs_write_0(DCS_SLEEP_OUT); | ||
168 | if (r) | ||
169 | return r; | ||
170 | |||
171 | hw_guard_start(td, 120); | ||
172 | |||
173 | msleep(5); | ||
174 | |||
175 | return 0; | ||
176 | } | ||
177 | |||
178 | static int taal_get_id(u8 *id1, u8 *id2, u8 *id3) | ||
179 | { | ||
180 | int r; | ||
181 | |||
182 | r = taal_dcs_read_1(DCS_GET_ID1, id1); | ||
183 | if (r) | ||
184 | return r; | ||
185 | r = taal_dcs_read_1(DCS_GET_ID2, id2); | ||
186 | if (r) | ||
187 | return r; | ||
188 | r = taal_dcs_read_1(DCS_GET_ID3, id3); | ||
189 | if (r) | ||
190 | return r; | ||
191 | |||
192 | return 0; | ||
193 | } | ||
194 | |||
195 | static int taal_set_addr_mode(u8 rotate, bool mirror) | ||
196 | { | ||
197 | int r; | ||
198 | u8 mode; | ||
199 | int b5, b6, b7; | ||
200 | |||
201 | r = taal_dcs_read_1(DCS_READ_MADCTL, &mode); | ||
202 | if (r) | ||
203 | return r; | ||
204 | |||
205 | switch (rotate) { | ||
206 | default: | ||
207 | case 0: | ||
208 | b7 = 0; | ||
209 | b6 = 0; | ||
210 | b5 = 0; | ||
211 | break; | ||
212 | case 1: | ||
213 | b7 = 0; | ||
214 | b6 = 1; | ||
215 | b5 = 1; | ||
216 | break; | ||
217 | case 2: | ||
218 | b7 = 1; | ||
219 | b6 = 1; | ||
220 | b5 = 0; | ||
221 | break; | ||
222 | case 3: | ||
223 | b7 = 1; | ||
224 | b6 = 0; | ||
225 | b5 = 1; | ||
226 | break; | ||
227 | } | ||
228 | |||
229 | if (mirror) | ||
230 | b6 = !b6; | ||
231 | |||
232 | mode &= ~((1<<7) | (1<<6) | (1<<5)); | ||
233 | mode |= (b7 << 7) | (b6 << 6) | (b5 << 5); | ||
234 | |||
235 | return taal_dcs_write_1(DCS_MEM_ACC_CTRL, mode); | ||
236 | } | ||
237 | |||
238 | static int taal_set_update_window(u16 x, u16 y, u16 w, u16 h) | ||
239 | { | ||
240 | int r; | ||
241 | u16 x1 = x; | ||
242 | u16 x2 = x + w - 1; | ||
243 | u16 y1 = y; | ||
244 | u16 y2 = y + h - 1; | ||
245 | |||
246 | u8 buf[5]; | ||
247 | buf[0] = DCS_COLUMN_ADDR; | ||
248 | buf[1] = (x1 >> 8) & 0xff; | ||
249 | buf[2] = (x1 >> 0) & 0xff; | ||
250 | buf[3] = (x2 >> 8) & 0xff; | ||
251 | buf[4] = (x2 >> 0) & 0xff; | ||
252 | |||
253 | r = dsi_vc_dcs_write_nosync(TCH, buf, sizeof(buf)); | ||
254 | if (r) | ||
255 | return r; | ||
256 | |||
257 | buf[0] = DCS_PAGE_ADDR; | ||
258 | buf[1] = (y1 >> 8) & 0xff; | ||
259 | buf[2] = (y1 >> 0) & 0xff; | ||
260 | buf[3] = (y2 >> 8) & 0xff; | ||
261 | buf[4] = (y2 >> 0) & 0xff; | ||
262 | |||
263 | r = dsi_vc_dcs_write_nosync(TCH, buf, sizeof(buf)); | ||
264 | if (r) | ||
265 | return r; | ||
266 | |||
267 | dsi_vc_send_bta_sync(TCH); | ||
268 | |||
269 | return r; | ||
270 | } | ||
271 | |||
272 | static int taal_bl_update_status(struct backlight_device *dev) | ||
273 | { | ||
274 | struct omap_dss_device *dssdev = dev_get_drvdata(&dev->dev); | ||
275 | struct taal_data *td = dev_get_drvdata(&dssdev->dev); | ||
276 | int r; | ||
277 | int level; | ||
278 | |||
279 | if (dev->props.fb_blank == FB_BLANK_UNBLANK && | ||
280 | dev->props.power == FB_BLANK_UNBLANK) | ||
281 | level = dev->props.brightness; | ||
282 | else | ||
283 | level = 0; | ||
284 | |||
285 | dev_dbg(&dssdev->dev, "update brightness to %d\n", level); | ||
286 | |||
287 | if (td->use_dsi_bl) { | ||
288 | if (td->enabled) { | ||
289 | dsi_bus_lock(); | ||
290 | r = taal_dcs_write_1(DCS_BRIGHTNESS, level); | ||
291 | dsi_bus_unlock(); | ||
292 | if (r) | ||
293 | return r; | ||
294 | } | ||
295 | } else { | ||
296 | if (!dssdev->set_backlight) | ||
297 | return -EINVAL; | ||
298 | |||
299 | r = dssdev->set_backlight(dssdev, level); | ||
300 | if (r) | ||
301 | return r; | ||
302 | } | ||
303 | |||
304 | return 0; | ||
305 | } | ||
306 | |||
307 | static int taal_bl_get_intensity(struct backlight_device *dev) | ||
308 | { | ||
309 | if (dev->props.fb_blank == FB_BLANK_UNBLANK && | ||
310 | dev->props.power == FB_BLANK_UNBLANK) | ||
311 | return dev->props.brightness; | ||
312 | |||
313 | return 0; | ||
314 | } | ||
315 | |||
316 | static struct backlight_ops taal_bl_ops = { | ||
317 | .get_brightness = taal_bl_get_intensity, | ||
318 | .update_status = taal_bl_update_status, | ||
319 | }; | ||
320 | |||
321 | static void taal_get_timings(struct omap_dss_device *dssdev, | ||
322 | struct omap_video_timings *timings) | ||
323 | { | ||
324 | *timings = dssdev->panel.timings; | ||
325 | } | ||
326 | |||
327 | static void taal_get_resolution(struct omap_dss_device *dssdev, | ||
328 | u16 *xres, u16 *yres) | ||
329 | { | ||
330 | struct taal_data *td = dev_get_drvdata(&dssdev->dev); | ||
331 | |||
332 | if (td->rotate == 0 || td->rotate == 2) { | ||
333 | *xres = dssdev->panel.timings.x_res; | ||
334 | *yres = dssdev->panel.timings.y_res; | ||
335 | } else { | ||
336 | *yres = dssdev->panel.timings.x_res; | ||
337 | *xres = dssdev->panel.timings.y_res; | ||
338 | } | ||
339 | } | ||
340 | |||
341 | static irqreturn_t taal_te_isr(int irq, void *data) | ||
342 | { | ||
343 | struct omap_dss_device *dssdev = data; | ||
344 | struct taal_data *td = dev_get_drvdata(&dssdev->dev); | ||
345 | |||
346 | complete_all(&td->te_completion); | ||
347 | |||
348 | return IRQ_HANDLED; | ||
349 | } | ||
350 | |||
351 | static ssize_t taal_num_errors_show(struct device *dev, | ||
352 | struct device_attribute *attr, char *buf) | ||
353 | { | ||
354 | struct omap_dss_device *dssdev = to_dss_device(dev); | ||
355 | struct taal_data *td = dev_get_drvdata(&dssdev->dev); | ||
356 | u8 errors; | ||
357 | int r; | ||
358 | |||
359 | if (td->enabled) { | ||
360 | dsi_bus_lock(); | ||
361 | r = taal_dcs_read_1(DCS_READ_NUM_ERRORS, &errors); | ||
362 | dsi_bus_unlock(); | ||
363 | } else { | ||
364 | r = -ENODEV; | ||
365 | } | ||
366 | |||
367 | if (r) | ||
368 | return r; | ||
369 | |||
370 | return snprintf(buf, PAGE_SIZE, "%d\n", errors); | ||
371 | } | ||
372 | |||
373 | static ssize_t taal_hw_revision_show(struct device *dev, | ||
374 | struct device_attribute *attr, char *buf) | ||
375 | { | ||
376 | struct omap_dss_device *dssdev = to_dss_device(dev); | ||
377 | struct taal_data *td = dev_get_drvdata(&dssdev->dev); | ||
378 | u8 id1, id2, id3; | ||
379 | int r; | ||
380 | |||
381 | if (td->enabled) { | ||
382 | dsi_bus_lock(); | ||
383 | r = taal_get_id(&id1, &id2, &id3); | ||
384 | dsi_bus_unlock(); | ||
385 | } else { | ||
386 | r = -ENODEV; | ||
387 | } | ||
388 | |||
389 | if (r) | ||
390 | return r; | ||
391 | |||
392 | return snprintf(buf, PAGE_SIZE, "%02x.%02x.%02x\n", id1, id2, id3); | ||
393 | } | ||
394 | |||
395 | static const char *cabc_modes[] = { | ||
396 | "off", /* used also always when CABC is not supported */ | ||
397 | "ui", | ||
398 | "still-image", | ||
399 | "moving-image", | ||
400 | }; | ||
401 | |||
402 | static ssize_t show_cabc_mode(struct device *dev, | ||
403 | struct device_attribute *attr, | ||
404 | char *buf) | ||
405 | { | ||
406 | struct omap_dss_device *dssdev = to_dss_device(dev); | ||
407 | struct taal_data *td = dev_get_drvdata(&dssdev->dev); | ||
408 | const char *mode_str; | ||
409 | int mode; | ||
410 | int len; | ||
411 | |||
412 | mode = td->cabc_mode; | ||
413 | |||
414 | mode_str = "unknown"; | ||
415 | if (mode >= 0 && mode < ARRAY_SIZE(cabc_modes)) | ||
416 | mode_str = cabc_modes[mode]; | ||
417 | len = snprintf(buf, PAGE_SIZE, "%s\n", mode_str); | ||
418 | |||
419 | return len < PAGE_SIZE - 1 ? len : PAGE_SIZE - 1; | ||
420 | } | ||
421 | |||
422 | static ssize_t store_cabc_mode(struct device *dev, | ||
423 | struct device_attribute *attr, | ||
424 | const char *buf, size_t count) | ||
425 | { | ||
426 | struct omap_dss_device *dssdev = to_dss_device(dev); | ||
427 | struct taal_data *td = dev_get_drvdata(&dssdev->dev); | ||
428 | int i; | ||
429 | |||
430 | for (i = 0; i < ARRAY_SIZE(cabc_modes); i++) { | ||
431 | if (sysfs_streq(cabc_modes[i], buf)) | ||
432 | break; | ||
433 | } | ||
434 | |||
435 | if (i == ARRAY_SIZE(cabc_modes)) | ||
436 | return -EINVAL; | ||
437 | |||
438 | if (td->enabled) { | ||
439 | dsi_bus_lock(); | ||
440 | if (!td->cabc_broken) | ||
441 | taal_dcs_write_1(DCS_WRITE_CABC, i); | ||
442 | dsi_bus_unlock(); | ||
443 | } | ||
444 | |||
445 | td->cabc_mode = i; | ||
446 | |||
447 | return count; | ||
448 | } | ||
449 | |||
450 | static ssize_t show_cabc_available_modes(struct device *dev, | ||
451 | struct device_attribute *attr, | ||
452 | char *buf) | ||
453 | { | ||
454 | int len; | ||
455 | int i; | ||
456 | |||
457 | for (i = 0, len = 0; | ||
458 | len < PAGE_SIZE && i < ARRAY_SIZE(cabc_modes); i++) | ||
459 | len += snprintf(&buf[len], PAGE_SIZE - len, "%s%s%s", | ||
460 | i ? " " : "", cabc_modes[i], | ||
461 | i == ARRAY_SIZE(cabc_modes) - 1 ? "\n" : ""); | ||
462 | |||
463 | return len < PAGE_SIZE ? len : PAGE_SIZE - 1; | ||
464 | } | ||
465 | |||
466 | static DEVICE_ATTR(num_dsi_errors, S_IRUGO, taal_num_errors_show, NULL); | ||
467 | static DEVICE_ATTR(hw_revision, S_IRUGO, taal_hw_revision_show, NULL); | ||
468 | static DEVICE_ATTR(cabc_mode, S_IRUGO | S_IWUSR, | ||
469 | show_cabc_mode, store_cabc_mode); | ||
470 | static DEVICE_ATTR(cabc_available_modes, S_IRUGO, | ||
471 | show_cabc_available_modes, NULL); | ||
472 | |||
473 | static struct attribute *taal_attrs[] = { | ||
474 | &dev_attr_num_dsi_errors.attr, | ||
475 | &dev_attr_hw_revision.attr, | ||
476 | &dev_attr_cabc_mode.attr, | ||
477 | &dev_attr_cabc_available_modes.attr, | ||
478 | NULL, | ||
479 | }; | ||
480 | |||
481 | static struct attribute_group taal_attr_group = { | ||
482 | .attrs = taal_attrs, | ||
483 | }; | ||
484 | |||
485 | static int taal_probe(struct omap_dss_device *dssdev) | ||
486 | { | ||
487 | struct taal_data *td; | ||
488 | struct backlight_device *bldev; | ||
489 | int r; | ||
490 | |||
491 | const struct omap_video_timings taal_panel_timings = { | ||
492 | .x_res = 864, | ||
493 | .y_res = 480, | ||
494 | }; | ||
495 | |||
496 | dev_dbg(&dssdev->dev, "probe\n"); | ||
497 | |||
498 | dssdev->panel.config = OMAP_DSS_LCD_TFT; | ||
499 | dssdev->panel.timings = taal_panel_timings; | ||
500 | dssdev->ctrl.pixel_size = 24; | ||
501 | |||
502 | td = kzalloc(sizeof(*td), GFP_KERNEL); | ||
503 | if (!td) { | ||
504 | r = -ENOMEM; | ||
505 | goto err0; | ||
506 | } | ||
507 | td->dssdev = dssdev; | ||
508 | |||
509 | td->esd_wq = create_singlethread_workqueue("taal_esd"); | ||
510 | if (td->esd_wq == NULL) { | ||
511 | dev_err(&dssdev->dev, "can't create ESD workqueue\n"); | ||
512 | r = -ENOMEM; | ||
513 | goto err2; | ||
514 | } | ||
515 | INIT_DELAYED_WORK_DEFERRABLE(&td->esd_work, taal_esd_work); | ||
516 | |||
517 | dev_set_drvdata(&dssdev->dev, td); | ||
518 | |||
519 | dssdev->get_timings = taal_get_timings; | ||
520 | dssdev->get_resolution = taal_get_resolution; | ||
521 | |||
522 | /* if no platform set_backlight() defined, presume DSI backlight | ||
523 | * control */ | ||
524 | if (!dssdev->set_backlight) | ||
525 | td->use_dsi_bl = true; | ||
526 | |||
527 | bldev = backlight_device_register("taal", &dssdev->dev, dssdev, | ||
528 | &taal_bl_ops); | ||
529 | if (IS_ERR(bldev)) { | ||
530 | r = PTR_ERR(bldev); | ||
531 | goto err1; | ||
532 | } | ||
533 | |||
534 | td->bldev = bldev; | ||
535 | |||
536 | bldev->props.fb_blank = FB_BLANK_UNBLANK; | ||
537 | bldev->props.power = FB_BLANK_UNBLANK; | ||
538 | if (td->use_dsi_bl) { | ||
539 | bldev->props.max_brightness = 255; | ||
540 | bldev->props.brightness = 255; | ||
541 | } else { | ||
542 | bldev->props.max_brightness = 127; | ||
543 | bldev->props.brightness = 127; | ||
544 | } | ||
545 | |||
546 | taal_bl_update_status(bldev); | ||
547 | |||
548 | if (dssdev->phy.dsi.ext_te) { | ||
549 | int gpio = dssdev->phy.dsi.ext_te_gpio; | ||
550 | |||
551 | r = gpio_request(gpio, "taal irq"); | ||
552 | if (r) { | ||
553 | dev_err(&dssdev->dev, "GPIO request failed\n"); | ||
554 | goto err3; | ||
555 | } | ||
556 | |||
557 | gpio_direction_input(gpio); | ||
558 | |||
559 | r = request_irq(gpio_to_irq(gpio), taal_te_isr, | ||
560 | IRQF_DISABLED | IRQF_TRIGGER_RISING, | ||
561 | "taal vsync", dssdev); | ||
562 | |||
563 | if (r) { | ||
564 | dev_err(&dssdev->dev, "IRQ request failed\n"); | ||
565 | gpio_free(gpio); | ||
566 | goto err3; | ||
567 | } | ||
568 | |||
569 | init_completion(&td->te_completion); | ||
570 | |||
571 | td->use_ext_te = true; | ||
572 | } | ||
573 | |||
574 | r = sysfs_create_group(&dssdev->dev.kobj, &taal_attr_group); | ||
575 | if (r) { | ||
576 | dev_err(&dssdev->dev, "failed to create sysfs files\n"); | ||
577 | goto err4; | ||
578 | } | ||
579 | |||
580 | return 0; | ||
581 | err4: | ||
582 | if (td->use_ext_te) { | ||
583 | int gpio = dssdev->phy.dsi.ext_te_gpio; | ||
584 | free_irq(gpio_to_irq(gpio), dssdev); | ||
585 | gpio_free(gpio); | ||
586 | } | ||
587 | err3: | ||
588 | backlight_device_unregister(bldev); | ||
589 | err2: | ||
590 | cancel_delayed_work_sync(&td->esd_work); | ||
591 | destroy_workqueue(td->esd_wq); | ||
592 | err1: | ||
593 | kfree(td); | ||
594 | err0: | ||
595 | return r; | ||
596 | } | ||
597 | |||
598 | static void taal_remove(struct omap_dss_device *dssdev) | ||
599 | { | ||
600 | struct taal_data *td = dev_get_drvdata(&dssdev->dev); | ||
601 | struct backlight_device *bldev; | ||
602 | |||
603 | dev_dbg(&dssdev->dev, "remove\n"); | ||
604 | |||
605 | sysfs_remove_group(&dssdev->dev.kobj, &taal_attr_group); | ||
606 | |||
607 | if (td->use_ext_te) { | ||
608 | int gpio = dssdev->phy.dsi.ext_te_gpio; | ||
609 | free_irq(gpio_to_irq(gpio), dssdev); | ||
610 | gpio_free(gpio); | ||
611 | } | ||
612 | |||
613 | bldev = td->bldev; | ||
614 | bldev->props.power = FB_BLANK_POWERDOWN; | ||
615 | taal_bl_update_status(bldev); | ||
616 | backlight_device_unregister(bldev); | ||
617 | |||
618 | cancel_delayed_work_sync(&td->esd_work); | ||
619 | destroy_workqueue(td->esd_wq); | ||
620 | |||
621 | kfree(td); | ||
622 | } | ||
623 | |||
624 | static int taal_enable(struct omap_dss_device *dssdev) | ||
625 | { | ||
626 | struct taal_data *td = dev_get_drvdata(&dssdev->dev); | ||
627 | u8 id1, id2, id3; | ||
628 | int r; | ||
629 | |||
630 | dev_dbg(&dssdev->dev, "enable\n"); | ||
631 | |||
632 | if (dssdev->platform_enable) { | ||
633 | r = dssdev->platform_enable(dssdev); | ||
634 | if (r) | ||
635 | return r; | ||
636 | } | ||
637 | |||
638 | /* it seems we have to wait a bit until taal is ready */ | ||
639 | msleep(5); | ||
640 | |||
641 | r = taal_sleep_out(td); | ||
642 | if (r) | ||
643 | goto err; | ||
644 | |||
645 | r = taal_get_id(&id1, &id2, &id3); | ||
646 | if (r) | ||
647 | goto err; | ||
648 | |||
649 | /* on early revisions CABC is broken */ | ||
650 | if (id2 == 0x00 || id2 == 0xff || id2 == 0x81) | ||
651 | td->cabc_broken = true; | ||
652 | |||
653 | taal_dcs_write_1(DCS_BRIGHTNESS, 0xff); | ||
654 | taal_dcs_write_1(DCS_CTRL_DISPLAY, (1<<2) | (1<<5)); /* BL | BCTRL */ | ||
655 | |||
656 | taal_dcs_write_1(DCS_PIXEL_FORMAT, 0x7); /* 24bit/pixel */ | ||
657 | |||
658 | taal_set_addr_mode(td->rotate, td->mirror); | ||
659 | if (!td->cabc_broken) | ||
660 | taal_dcs_write_1(DCS_WRITE_CABC, td->cabc_mode); | ||
661 | |||
662 | taal_dcs_write_0(DCS_DISPLAY_ON); | ||
663 | |||
664 | #ifdef TAAL_USE_ESD_CHECK | ||
665 | queue_delayed_work(td->esd_wq, &td->esd_work, TAAL_ESD_CHECK_PERIOD); | ||
666 | #endif | ||
667 | |||
668 | td->enabled = 1; | ||
669 | |||
670 | if (!td->intro_printed) { | ||
671 | dev_info(&dssdev->dev, "revision %02x.%02x.%02x\n", | ||
672 | id1, id2, id3); | ||
673 | if (td->cabc_broken) | ||
674 | dev_info(&dssdev->dev, | ||
675 | "old Taal version, CABC disabled\n"); | ||
676 | td->intro_printed = true; | ||
677 | } | ||
678 | |||
679 | return 0; | ||
680 | err: | ||
681 | if (dssdev->platform_disable) | ||
682 | dssdev->platform_disable(dssdev); | ||
683 | |||
684 | return r; | ||
685 | } | ||
686 | |||
687 | static void taal_disable(struct omap_dss_device *dssdev) | ||
688 | { | ||
689 | struct taal_data *td = dev_get_drvdata(&dssdev->dev); | ||
690 | |||
691 | dev_dbg(&dssdev->dev, "disable\n"); | ||
692 | |||
693 | cancel_delayed_work(&td->esd_work); | ||
694 | |||
695 | taal_dcs_write_0(DCS_DISPLAY_OFF); | ||
696 | taal_sleep_in(td); | ||
697 | |||
698 | /* wait a bit so that the message goes through */ | ||
699 | msleep(10); | ||
700 | |||
701 | if (dssdev->platform_disable) | ||
702 | dssdev->platform_disable(dssdev); | ||
703 | |||
704 | td->enabled = 0; | ||
705 | } | ||
706 | |||
707 | static int taal_suspend(struct omap_dss_device *dssdev) | ||
708 | { | ||
709 | struct taal_data *td = dev_get_drvdata(&dssdev->dev); | ||
710 | struct backlight_device *bldev = td->bldev; | ||
711 | |||
712 | bldev->props.power = FB_BLANK_POWERDOWN; | ||
713 | taal_bl_update_status(bldev); | ||
714 | |||
715 | return 0; | ||
716 | } | ||
717 | |||
718 | static int taal_resume(struct omap_dss_device *dssdev) | ||
719 | { | ||
720 | struct taal_data *td = dev_get_drvdata(&dssdev->dev); | ||
721 | struct backlight_device *bldev = td->bldev; | ||
722 | |||
723 | bldev->props.power = FB_BLANK_UNBLANK; | ||
724 | taal_bl_update_status(bldev); | ||
725 | |||
726 | return 0; | ||
727 | } | ||
728 | |||
729 | static void taal_setup_update(struct omap_dss_device *dssdev, | ||
730 | u16 x, u16 y, u16 w, u16 h) | ||
731 | { | ||
732 | taal_set_update_window(x, y, w, h); | ||
733 | } | ||
734 | |||
735 | static int taal_enable_te(struct omap_dss_device *dssdev, bool enable) | ||
736 | { | ||
737 | struct taal_data *td = dev_get_drvdata(&dssdev->dev); | ||
738 | int r; | ||
739 | |||
740 | td->te_enabled = enable; | ||
741 | |||
742 | if (enable) | ||
743 | r = taal_dcs_write_1(DCS_TEAR_ON, 0); | ||
744 | else | ||
745 | r = taal_dcs_write_0(DCS_TEAR_OFF); | ||
746 | |||
747 | return r; | ||
748 | } | ||
749 | |||
750 | static int taal_wait_te(struct omap_dss_device *dssdev) | ||
751 | { | ||
752 | struct taal_data *td = dev_get_drvdata(&dssdev->dev); | ||
753 | long wait = msecs_to_jiffies(500); | ||
754 | |||
755 | if (!td->use_ext_te || !td->te_enabled) | ||
756 | return 0; | ||
757 | |||
758 | INIT_COMPLETION(td->te_completion); | ||
759 | wait = wait_for_completion_timeout(&td->te_completion, wait); | ||
760 | if (wait == 0) { | ||
761 | dev_err(&dssdev->dev, "timeout waiting TE\n"); | ||
762 | return -ETIME; | ||
763 | } | ||
764 | |||
765 | return 0; | ||
766 | } | ||
767 | |||
768 | static int taal_rotate(struct omap_dss_device *dssdev, u8 rotate) | ||
769 | { | ||
770 | struct taal_data *td = dev_get_drvdata(&dssdev->dev); | ||
771 | int r; | ||
772 | |||
773 | dev_dbg(&dssdev->dev, "rotate %d\n", rotate); | ||
774 | |||
775 | if (td->enabled) { | ||
776 | r = taal_set_addr_mode(rotate, td->mirror); | ||
777 | |||
778 | if (r) | ||
779 | return r; | ||
780 | } | ||
781 | |||
782 | td->rotate = rotate; | ||
783 | |||
784 | return 0; | ||
785 | } | ||
786 | |||
787 | static u8 taal_get_rotate(struct omap_dss_device *dssdev) | ||
788 | { | ||
789 | struct taal_data *td = dev_get_drvdata(&dssdev->dev); | ||
790 | return td->rotate; | ||
791 | } | ||
792 | |||
793 | static int taal_mirror(struct omap_dss_device *dssdev, bool enable) | ||
794 | { | ||
795 | struct taal_data *td = dev_get_drvdata(&dssdev->dev); | ||
796 | int r; | ||
797 | |||
798 | dev_dbg(&dssdev->dev, "mirror %d\n", enable); | ||
799 | |||
800 | if (td->enabled) { | ||
801 | r = taal_set_addr_mode(td->rotate, enable); | ||
802 | |||
803 | if (r) | ||
804 | return r; | ||
805 | } | ||
806 | |||
807 | td->mirror = enable; | ||
808 | |||
809 | return 0; | ||
810 | } | ||
811 | |||
812 | static bool taal_get_mirror(struct omap_dss_device *dssdev) | ||
813 | { | ||
814 | struct taal_data *td = dev_get_drvdata(&dssdev->dev); | ||
815 | return td->mirror; | ||
816 | } | ||
817 | |||
818 | static int taal_run_test(struct omap_dss_device *dssdev, int test_num) | ||
819 | { | ||
820 | u8 id1, id2, id3; | ||
821 | int r; | ||
822 | |||
823 | r = taal_dcs_read_1(DCS_GET_ID1, &id1); | ||
824 | if (r) | ||
825 | return r; | ||
826 | r = taal_dcs_read_1(DCS_GET_ID2, &id2); | ||
827 | if (r) | ||
828 | return r; | ||
829 | r = taal_dcs_read_1(DCS_GET_ID3, &id3); | ||
830 | if (r) | ||
831 | return r; | ||
832 | |||
833 | return 0; | ||
834 | } | ||
835 | |||
836 | static int taal_memory_read(struct omap_dss_device *dssdev, | ||
837 | void *buf, size_t size, | ||
838 | u16 x, u16 y, u16 w, u16 h) | ||
839 | { | ||
840 | int r; | ||
841 | int first = 1; | ||
842 | int plen; | ||
843 | unsigned buf_used = 0; | ||
844 | |||
845 | if (size < w * h * 3) | ||
846 | return -ENOMEM; | ||
847 | |||
848 | size = min(w * h * 3, | ||
849 | dssdev->panel.timings.x_res * | ||
850 | dssdev->panel.timings.y_res * 3); | ||
851 | |||
852 | /* plen 1 or 2 goes into short packet. until checksum error is fixed, | ||
853 | * use short packets. plen 32 works, but bigger packets seem to cause | ||
854 | * an error. */ | ||
855 | if (size % 2) | ||
856 | plen = 1; | ||
857 | else | ||
858 | plen = 2; | ||
859 | |||
860 | taal_setup_update(dssdev, x, y, w, h); | ||
861 | |||
862 | r = dsi_vc_set_max_rx_packet_size(TCH, plen); | ||
863 | if (r) | ||
864 | return r; | ||
865 | |||
866 | while (buf_used < size) { | ||
867 | u8 dcs_cmd = first ? 0x2e : 0x3e; | ||
868 | first = 0; | ||
869 | |||
870 | r = dsi_vc_dcs_read(TCH, dcs_cmd, | ||
871 | buf + buf_used, size - buf_used); | ||
872 | |||
873 | if (r < 0) { | ||
874 | dev_err(&dssdev->dev, "read error\n"); | ||
875 | goto err; | ||
876 | } | ||
877 | |||
878 | buf_used += r; | ||
879 | |||
880 | if (r < plen) { | ||
881 | dev_err(&dssdev->dev, "short read\n"); | ||
882 | break; | ||
883 | } | ||
884 | |||
885 | if (signal_pending(current)) { | ||
886 | dev_err(&dssdev->dev, "signal pending, " | ||
887 | "aborting memory read\n"); | ||
888 | r = -ERESTARTSYS; | ||
889 | goto err; | ||
890 | } | ||
891 | } | ||
892 | |||
893 | r = buf_used; | ||
894 | |||
895 | err: | ||
896 | dsi_vc_set_max_rx_packet_size(TCH, 1); | ||
897 | |||
898 | return r; | ||
899 | } | ||
900 | |||
901 | static void taal_esd_work(struct work_struct *work) | ||
902 | { | ||
903 | struct taal_data *td = container_of(work, struct taal_data, | ||
904 | esd_work.work); | ||
905 | struct omap_dss_device *dssdev = td->dssdev; | ||
906 | u8 state1, state2; | ||
907 | int r; | ||
908 | |||
909 | if (!td->enabled) | ||
910 | return; | ||
911 | |||
912 | dsi_bus_lock(); | ||
913 | |||
914 | r = taal_dcs_read_1(DCS_RDDSDR, &state1); | ||
915 | if (r) { | ||
916 | dev_err(&dssdev->dev, "failed to read Taal status\n"); | ||
917 | goto err; | ||
918 | } | ||
919 | |||
920 | /* Run self diagnostics */ | ||
921 | r = taal_sleep_out(td); | ||
922 | if (r) { | ||
923 | dev_err(&dssdev->dev, "failed to run Taal self-diagnostics\n"); | ||
924 | goto err; | ||
925 | } | ||
926 | |||
927 | r = taal_dcs_read_1(DCS_RDDSDR, &state2); | ||
928 | if (r) { | ||
929 | dev_err(&dssdev->dev, "failed to read Taal status\n"); | ||
930 | goto err; | ||
931 | } | ||
932 | |||
933 | /* Each sleep out command will trigger a self diagnostic and flip | ||
934 | * Bit6 if the test passes. | ||
935 | */ | ||
936 | if (!((state1 ^ state2) & (1 << 6))) { | ||
937 | dev_err(&dssdev->dev, "LCD self diagnostics failed\n"); | ||
938 | goto err; | ||
939 | } | ||
940 | /* Self-diagnostics result is also shown on TE GPIO line. We need | ||
941 | * to re-enable TE after self diagnostics */ | ||
942 | if (td->use_ext_te && td->te_enabled) | ||
943 | taal_enable_te(dssdev, true); | ||
944 | |||
945 | dsi_bus_unlock(); | ||
946 | |||
947 | queue_delayed_work(td->esd_wq, &td->esd_work, TAAL_ESD_CHECK_PERIOD); | ||
948 | |||
949 | return; | ||
950 | err: | ||
951 | dev_err(&dssdev->dev, "performing LCD reset\n"); | ||
952 | |||
953 | taal_disable(dssdev); | ||
954 | taal_enable(dssdev); | ||
955 | |||
956 | dsi_bus_unlock(); | ||
957 | |||
958 | queue_delayed_work(td->esd_wq, &td->esd_work, TAAL_ESD_CHECK_PERIOD); | ||
959 | } | ||
960 | |||
961 | static struct omap_dss_driver taal_driver = { | ||
962 | .probe = taal_probe, | ||
963 | .remove = taal_remove, | ||
964 | |||
965 | .enable = taal_enable, | ||
966 | .disable = taal_disable, | ||
967 | .suspend = taal_suspend, | ||
968 | .resume = taal_resume, | ||
969 | |||
970 | .setup_update = taal_setup_update, | ||
971 | .enable_te = taal_enable_te, | ||
972 | .wait_for_te = taal_wait_te, | ||
973 | .set_rotate = taal_rotate, | ||
974 | .get_rotate = taal_get_rotate, | ||
975 | .set_mirror = taal_mirror, | ||
976 | .get_mirror = taal_get_mirror, | ||
977 | .run_test = taal_run_test, | ||
978 | .memory_read = taal_memory_read, | ||
979 | |||
980 | .driver = { | ||
981 | .name = "taal", | ||
982 | .owner = THIS_MODULE, | ||
983 | }, | ||
984 | }; | ||
985 | |||
986 | static int __init taal_init(void) | ||
987 | { | ||
988 | omap_dss_register_driver(&taal_driver); | ||
989 | |||
990 | return 0; | ||
991 | } | ||
992 | |||
993 | static void __exit taal_exit(void) | ||
994 | { | ||
995 | omap_dss_unregister_driver(&taal_driver); | ||
996 | } | ||
997 | |||
998 | module_init(taal_init); | ||
999 | module_exit(taal_exit); | ||
1000 | |||
1001 | MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@nokia.com>"); | ||
1002 | MODULE_DESCRIPTION("Taal Driver"); | ||
1003 | MODULE_LICENSE("GPL"); | ||
diff --git a/drivers/video/omap2/dss/Kconfig b/drivers/video/omap2/dss/Kconfig new file mode 100644 index 000000000000..71d8dec30635 --- /dev/null +++ b/drivers/video/omap2/dss/Kconfig | |||
@@ -0,0 +1,89 @@ | |||
1 | menuconfig OMAP2_DSS | ||
2 | tristate "OMAP2/3 Display Subsystem support (EXPERIMENTAL)" | ||
3 | depends on ARCH_OMAP2 || ARCH_OMAP3 | ||
4 | help | ||
5 | OMAP2/3 Display Subsystem support. | ||
6 | |||
7 | if OMAP2_DSS | ||
8 | |||
9 | config OMAP2_VRAM_SIZE | ||
10 | int "VRAM size (MB)" | ||
11 | range 0 32 | ||
12 | default 0 | ||
13 | help | ||
14 | The amount of SDRAM to reserve at boot time for video RAM use. | ||
15 | This VRAM will be used by omapfb and other drivers that need | ||
16 | large continuous RAM area for video use. | ||
17 | |||
18 | You can also set this with "vram=<bytes>" kernel argument, or | ||
19 | in the board file. | ||
20 | |||
21 | config OMAP2_DSS_DEBUG_SUPPORT | ||
22 | bool "Debug support" | ||
23 | default y | ||
24 | help | ||
25 | This enables debug messages. You need to enable printing | ||
26 | with 'debug' module parameter. | ||
27 | |||
28 | config OMAP2_DSS_RFBI | ||
29 | bool "RFBI support" | ||
30 | default n | ||
31 | help | ||
32 | MIPI DBI, or RFBI (Remote Framebuffer Interface), support. | ||
33 | |||
34 | config OMAP2_DSS_VENC | ||
35 | bool "VENC support" | ||
36 | default y | ||
37 | help | ||
38 | OMAP Video Encoder support. | ||
39 | |||
40 | config OMAP2_DSS_SDI | ||
41 | bool "SDI support" | ||
42 | depends on ARCH_OMAP3 | ||
43 | default n | ||
44 | help | ||
45 | SDI (Serial Display Interface) support. | ||
46 | |||
47 | config OMAP2_DSS_DSI | ||
48 | bool "DSI support" | ||
49 | depends on ARCH_OMAP3 | ||
50 | default n | ||
51 | help | ||
52 | MIPI DSI support. | ||
53 | |||
54 | config OMAP2_DSS_USE_DSI_PLL | ||
55 | bool "Use DSI PLL for PCLK (EXPERIMENTAL)" | ||
56 | default n | ||
57 | depends on OMAP2_DSS_DSI | ||
58 | help | ||
59 | Use DSI PLL to generate pixel clock. Currently only for DPI output. | ||
60 | DSI PLL can be used to generate higher and more precise pixel clocks. | ||
61 | |||
62 | config OMAP2_DSS_FAKE_VSYNC | ||
63 | bool "Fake VSYNC irq from manual update displays" | ||
64 | default n | ||
65 | help | ||
66 | If this is selected, DSI will generate a fake DISPC VSYNC interrupt | ||
67 | when DSI has sent a frame. This is only needed with DSI or RFBI | ||
68 | displays using manual mode, and you want VSYNC to, for example, | ||
69 | time animation. | ||
70 | |||
71 | config OMAP2_DSS_MIN_FCK_PER_PCK | ||
72 | int "Minimum FCK/PCK ratio (for scaling)" | ||
73 | range 0 32 | ||
74 | default 0 | ||
75 | help | ||
76 | This can be used to adjust the minimum FCK/PCK ratio. | ||
77 | |||
78 | With this you can make sure that DISPC FCK is at least | ||
79 | n x PCK. Video plane scaling requires higher FCK than | ||
80 | normally. | ||
81 | |||
82 | If this is set to 0, there's no extra constraint on the | ||
83 | DISPC FCK. However, the FCK will at minimum be | ||
84 | 2xPCK (if active matrix) or 3xPCK (if passive matrix). | ||
85 | |||
86 | Max FCK is 173MHz, so this doesn't work if your PCK | ||
87 | is very high. | ||
88 | |||
89 | endif | ||
diff --git a/drivers/video/omap2/dss/Makefile b/drivers/video/omap2/dss/Makefile new file mode 100644 index 000000000000..980c72c2db98 --- /dev/null +++ b/drivers/video/omap2/dss/Makefile | |||
@@ -0,0 +1,6 @@ | |||
1 | obj-$(CONFIG_OMAP2_DSS) += omapdss.o | ||
2 | omapdss-y := core.o dss.o dispc.o dpi.o display.o manager.o overlay.o | ||
3 | omapdss-$(CONFIG_OMAP2_DSS_RFBI) += rfbi.o | ||
4 | omapdss-$(CONFIG_OMAP2_DSS_VENC) += venc.o | ||
5 | omapdss-$(CONFIG_OMAP2_DSS_SDI) += sdi.o | ||
6 | omapdss-$(CONFIG_OMAP2_DSS_DSI) += dsi.o | ||
diff --git a/drivers/video/omap2/dss/core.c b/drivers/video/omap2/dss/core.c new file mode 100644 index 000000000000..29497a0c9a91 --- /dev/null +++ b/drivers/video/omap2/dss/core.c | |||
@@ -0,0 +1,919 @@ | |||
1 | /* | ||
2 | * linux/drivers/video/omap2/dss/core.c | ||
3 | * | ||
4 | * Copyright (C) 2009 Nokia Corporation | ||
5 | * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> | ||
6 | * | ||
7 | * Some code and ideas taken from drivers/video/omap/ driver | ||
8 | * by Imre Deak. | ||
9 | * | ||
10 | * This program is free software; you can redistribute it and/or modify it | ||
11 | * under the terms of the GNU General Public License version 2 as published by | ||
12 | * the Free Software Foundation. | ||
13 | * | ||
14 | * This program is distributed in the hope that it will be useful, but WITHOUT | ||
15 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | ||
16 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for | ||
17 | * more details. | ||
18 | * | ||
19 | * You should have received a copy of the GNU General Public License along with | ||
20 | * this program. If not, see <http://www.gnu.org/licenses/>. | ||
21 | */ | ||
22 | |||
23 | #define DSS_SUBSYS_NAME "CORE" | ||
24 | |||
25 | #include <linux/kernel.h> | ||
26 | #include <linux/module.h> | ||
27 | #include <linux/clk.h> | ||
28 | #include <linux/err.h> | ||
29 | #include <linux/platform_device.h> | ||
30 | #include <linux/seq_file.h> | ||
31 | #include <linux/debugfs.h> | ||
32 | #include <linux/io.h> | ||
33 | #include <linux/device.h> | ||
34 | |||
35 | #include <plat/display.h> | ||
36 | #include <plat/clock.h> | ||
37 | |||
38 | #include "dss.h" | ||
39 | |||
40 | static struct { | ||
41 | struct platform_device *pdev; | ||
42 | int ctx_id; | ||
43 | |||
44 | struct clk *dss_ick; | ||
45 | struct clk *dss1_fck; | ||
46 | struct clk *dss2_fck; | ||
47 | struct clk *dss_54m_fck; | ||
48 | struct clk *dss_96m_fck; | ||
49 | unsigned num_clks_enabled; | ||
50 | } core; | ||
51 | |||
52 | static void dss_clk_enable_all_no_ctx(void); | ||
53 | static void dss_clk_disable_all_no_ctx(void); | ||
54 | static void dss_clk_enable_no_ctx(enum dss_clock clks); | ||
55 | static void dss_clk_disable_no_ctx(enum dss_clock clks); | ||
56 | |||
57 | static char *def_disp_name; | ||
58 | module_param_named(def_disp, def_disp_name, charp, 0); | ||
59 | MODULE_PARM_DESC(def_disp_name, "default display name"); | ||
60 | |||
61 | #ifdef DEBUG | ||
62 | unsigned int dss_debug; | ||
63 | module_param_named(debug, dss_debug, bool, 0644); | ||
64 | #endif | ||
65 | |||
66 | /* CONTEXT */ | ||
67 | static int dss_get_ctx_id(void) | ||
68 | { | ||
69 | struct omap_dss_board_info *pdata = core.pdev->dev.platform_data; | ||
70 | int r; | ||
71 | |||
72 | if (!pdata->get_last_off_on_transaction_id) | ||
73 | return 0; | ||
74 | r = pdata->get_last_off_on_transaction_id(&core.pdev->dev); | ||
75 | if (r < 0) { | ||
76 | dev_err(&core.pdev->dev, "getting transaction ID failed, " | ||
77 | "will force context restore\n"); | ||
78 | r = -1; | ||
79 | } | ||
80 | return r; | ||
81 | } | ||
82 | |||
83 | int dss_need_ctx_restore(void) | ||
84 | { | ||
85 | int id = dss_get_ctx_id(); | ||
86 | |||
87 | if (id < 0 || id != core.ctx_id) { | ||
88 | DSSDBG("ctx id %d -> id %d\n", | ||
89 | core.ctx_id, id); | ||
90 | core.ctx_id = id; | ||
91 | return 1; | ||
92 | } else { | ||
93 | return 0; | ||
94 | } | ||
95 | } | ||
96 | |||
97 | static void save_all_ctx(void) | ||
98 | { | ||
99 | DSSDBG("save context\n"); | ||
100 | |||
101 | dss_clk_enable_no_ctx(DSS_CLK_ICK | DSS_CLK_FCK1); | ||
102 | |||
103 | dss_save_context(); | ||
104 | dispc_save_context(); | ||
105 | #ifdef CONFIG_OMAP2_DSS_DSI | ||
106 | dsi_save_context(); | ||
107 | #endif | ||
108 | |||
109 | dss_clk_disable_no_ctx(DSS_CLK_ICK | DSS_CLK_FCK1); | ||
110 | } | ||
111 | |||
112 | static void restore_all_ctx(void) | ||
113 | { | ||
114 | DSSDBG("restore context\n"); | ||
115 | |||
116 | dss_clk_enable_all_no_ctx(); | ||
117 | |||
118 | dss_restore_context(); | ||
119 | dispc_restore_context(); | ||
120 | #ifdef CONFIG_OMAP2_DSS_DSI | ||
121 | dsi_restore_context(); | ||
122 | #endif | ||
123 | |||
124 | dss_clk_disable_all_no_ctx(); | ||
125 | } | ||
126 | |||
127 | /* CLOCKS */ | ||
128 | static void core_dump_clocks(struct seq_file *s) | ||
129 | { | ||
130 | int i; | ||
131 | struct clk *clocks[5] = { | ||
132 | core.dss_ick, | ||
133 | core.dss1_fck, | ||
134 | core.dss2_fck, | ||
135 | core.dss_54m_fck, | ||
136 | core.dss_96m_fck | ||
137 | }; | ||
138 | |||
139 | seq_printf(s, "- CORE -\n"); | ||
140 | |||
141 | seq_printf(s, "internal clk count\t\t%u\n", core.num_clks_enabled); | ||
142 | |||
143 | for (i = 0; i < 5; i++) { | ||
144 | if (!clocks[i]) | ||
145 | continue; | ||
146 | seq_printf(s, "%-15s\t%lu\t%d\n", | ||
147 | clocks[i]->name, | ||
148 | clk_get_rate(clocks[i]), | ||
149 | clocks[i]->usecount); | ||
150 | } | ||
151 | } | ||
152 | |||
153 | static int dss_get_clock(struct clk **clock, const char *clk_name) | ||
154 | { | ||
155 | struct clk *clk; | ||
156 | |||
157 | clk = clk_get(&core.pdev->dev, clk_name); | ||
158 | |||
159 | if (IS_ERR(clk)) { | ||
160 | DSSERR("can't get clock %s", clk_name); | ||
161 | return PTR_ERR(clk); | ||
162 | } | ||
163 | |||
164 | *clock = clk; | ||
165 | |||
166 | DSSDBG("clk %s, rate %ld\n", clk_name, clk_get_rate(clk)); | ||
167 | |||
168 | return 0; | ||
169 | } | ||
170 | |||
171 | static int dss_get_clocks(void) | ||
172 | { | ||
173 | int r; | ||
174 | |||
175 | core.dss_ick = NULL; | ||
176 | core.dss1_fck = NULL; | ||
177 | core.dss2_fck = NULL; | ||
178 | core.dss_54m_fck = NULL; | ||
179 | core.dss_96m_fck = NULL; | ||
180 | |||
181 | r = dss_get_clock(&core.dss_ick, "ick"); | ||
182 | if (r) | ||
183 | goto err; | ||
184 | |||
185 | r = dss_get_clock(&core.dss1_fck, "dss1_fck"); | ||
186 | if (r) | ||
187 | goto err; | ||
188 | |||
189 | r = dss_get_clock(&core.dss2_fck, "dss2_fck"); | ||
190 | if (r) | ||
191 | goto err; | ||
192 | |||
193 | r = dss_get_clock(&core.dss_54m_fck, "tv_fck"); | ||
194 | if (r) | ||
195 | goto err; | ||
196 | |||
197 | r = dss_get_clock(&core.dss_96m_fck, "video_fck"); | ||
198 | if (r) | ||
199 | goto err; | ||
200 | |||
201 | return 0; | ||
202 | |||
203 | err: | ||
204 | if (core.dss_ick) | ||
205 | clk_put(core.dss_ick); | ||
206 | if (core.dss1_fck) | ||
207 | clk_put(core.dss1_fck); | ||
208 | if (core.dss2_fck) | ||
209 | clk_put(core.dss2_fck); | ||
210 | if (core.dss_54m_fck) | ||
211 | clk_put(core.dss_54m_fck); | ||
212 | if (core.dss_96m_fck) | ||
213 | clk_put(core.dss_96m_fck); | ||
214 | |||
215 | return r; | ||
216 | } | ||
217 | |||
218 | static void dss_put_clocks(void) | ||
219 | { | ||
220 | if (core.dss_96m_fck) | ||
221 | clk_put(core.dss_96m_fck); | ||
222 | clk_put(core.dss_54m_fck); | ||
223 | clk_put(core.dss1_fck); | ||
224 | clk_put(core.dss2_fck); | ||
225 | clk_put(core.dss_ick); | ||
226 | } | ||
227 | |||
228 | unsigned long dss_clk_get_rate(enum dss_clock clk) | ||
229 | { | ||
230 | switch (clk) { | ||
231 | case DSS_CLK_ICK: | ||
232 | return clk_get_rate(core.dss_ick); | ||
233 | case DSS_CLK_FCK1: | ||
234 | return clk_get_rate(core.dss1_fck); | ||
235 | case DSS_CLK_FCK2: | ||
236 | return clk_get_rate(core.dss2_fck); | ||
237 | case DSS_CLK_54M: | ||
238 | return clk_get_rate(core.dss_54m_fck); | ||
239 | case DSS_CLK_96M: | ||
240 | return clk_get_rate(core.dss_96m_fck); | ||
241 | } | ||
242 | |||
243 | BUG(); | ||
244 | return 0; | ||
245 | } | ||
246 | |||
247 | static unsigned count_clk_bits(enum dss_clock clks) | ||
248 | { | ||
249 | unsigned num_clks = 0; | ||
250 | |||
251 | if (clks & DSS_CLK_ICK) | ||
252 | ++num_clks; | ||
253 | if (clks & DSS_CLK_FCK1) | ||
254 | ++num_clks; | ||
255 | if (clks & DSS_CLK_FCK2) | ||
256 | ++num_clks; | ||
257 | if (clks & DSS_CLK_54M) | ||
258 | ++num_clks; | ||
259 | if (clks & DSS_CLK_96M) | ||
260 | ++num_clks; | ||
261 | |||
262 | return num_clks; | ||
263 | } | ||
264 | |||
265 | static void dss_clk_enable_no_ctx(enum dss_clock clks) | ||
266 | { | ||
267 | unsigned num_clks = count_clk_bits(clks); | ||
268 | |||
269 | if (clks & DSS_CLK_ICK) | ||
270 | clk_enable(core.dss_ick); | ||
271 | if (clks & DSS_CLK_FCK1) | ||
272 | clk_enable(core.dss1_fck); | ||
273 | if (clks & DSS_CLK_FCK2) | ||
274 | clk_enable(core.dss2_fck); | ||
275 | if (clks & DSS_CLK_54M) | ||
276 | clk_enable(core.dss_54m_fck); | ||
277 | if (clks & DSS_CLK_96M) | ||
278 | clk_enable(core.dss_96m_fck); | ||
279 | |||
280 | core.num_clks_enabled += num_clks; | ||
281 | } | ||
282 | |||
283 | void dss_clk_enable(enum dss_clock clks) | ||
284 | { | ||
285 | dss_clk_enable_no_ctx(clks); | ||
286 | |||
287 | if (cpu_is_omap34xx() && dss_need_ctx_restore()) | ||
288 | restore_all_ctx(); | ||
289 | } | ||
290 | |||
291 | static void dss_clk_disable_no_ctx(enum dss_clock clks) | ||
292 | { | ||
293 | unsigned num_clks = count_clk_bits(clks); | ||
294 | |||
295 | if (clks & DSS_CLK_ICK) | ||
296 | clk_disable(core.dss_ick); | ||
297 | if (clks & DSS_CLK_FCK1) | ||
298 | clk_disable(core.dss1_fck); | ||
299 | if (clks & DSS_CLK_FCK2) | ||
300 | clk_disable(core.dss2_fck); | ||
301 | if (clks & DSS_CLK_54M) | ||
302 | clk_disable(core.dss_54m_fck); | ||
303 | if (clks & DSS_CLK_96M) | ||
304 | clk_disable(core.dss_96m_fck); | ||
305 | |||
306 | core.num_clks_enabled -= num_clks; | ||
307 | } | ||
308 | |||
309 | void dss_clk_disable(enum dss_clock clks) | ||
310 | { | ||
311 | if (cpu_is_omap34xx()) { | ||
312 | unsigned num_clks = count_clk_bits(clks); | ||
313 | |||
314 | BUG_ON(core.num_clks_enabled < num_clks); | ||
315 | |||
316 | if (core.num_clks_enabled == num_clks) | ||
317 | save_all_ctx(); | ||
318 | } | ||
319 | |||
320 | dss_clk_disable_no_ctx(clks); | ||
321 | } | ||
322 | |||
323 | static void dss_clk_enable_all_no_ctx(void) | ||
324 | { | ||
325 | enum dss_clock clks; | ||
326 | |||
327 | clks = DSS_CLK_ICK | DSS_CLK_FCK1 | DSS_CLK_FCK2 | DSS_CLK_54M; | ||
328 | if (cpu_is_omap34xx()) | ||
329 | clks |= DSS_CLK_96M; | ||
330 | dss_clk_enable_no_ctx(clks); | ||
331 | } | ||
332 | |||
333 | static void dss_clk_disable_all_no_ctx(void) | ||
334 | { | ||
335 | enum dss_clock clks; | ||
336 | |||
337 | clks = DSS_CLK_ICK | DSS_CLK_FCK1 | DSS_CLK_FCK2 | DSS_CLK_54M; | ||
338 | if (cpu_is_omap34xx()) | ||
339 | clks |= DSS_CLK_96M; | ||
340 | dss_clk_disable_no_ctx(clks); | ||
341 | } | ||
342 | |||
343 | static void dss_clk_disable_all(void) | ||
344 | { | ||
345 | enum dss_clock clks; | ||
346 | |||
347 | clks = DSS_CLK_ICK | DSS_CLK_FCK1 | DSS_CLK_FCK2 | DSS_CLK_54M; | ||
348 | if (cpu_is_omap34xx()) | ||
349 | clks |= DSS_CLK_96M; | ||
350 | dss_clk_disable(clks); | ||
351 | } | ||
352 | |||
353 | /* DEBUGFS */ | ||
354 | #if defined(CONFIG_DEBUG_FS) && defined(CONFIG_OMAP2_DSS_DEBUG_SUPPORT) | ||
355 | static void dss_debug_dump_clocks(struct seq_file *s) | ||
356 | { | ||
357 | core_dump_clocks(s); | ||
358 | dss_dump_clocks(s); | ||
359 | dispc_dump_clocks(s); | ||
360 | #ifdef CONFIG_OMAP2_DSS_DSI | ||
361 | dsi_dump_clocks(s); | ||
362 | #endif | ||
363 | } | ||
364 | |||
365 | static int dss_debug_show(struct seq_file *s, void *unused) | ||
366 | { | ||
367 | void (*func)(struct seq_file *) = s->private; | ||
368 | func(s); | ||
369 | return 0; | ||
370 | } | ||
371 | |||
372 | static int dss_debug_open(struct inode *inode, struct file *file) | ||
373 | { | ||
374 | return single_open(file, dss_debug_show, inode->i_private); | ||
375 | } | ||
376 | |||
377 | static const struct file_operations dss_debug_fops = { | ||
378 | .open = dss_debug_open, | ||
379 | .read = seq_read, | ||
380 | .llseek = seq_lseek, | ||
381 | .release = single_release, | ||
382 | }; | ||
383 | |||
384 | static struct dentry *dss_debugfs_dir; | ||
385 | |||
386 | static int dss_initialize_debugfs(void) | ||
387 | { | ||
388 | dss_debugfs_dir = debugfs_create_dir("omapdss", NULL); | ||
389 | if (IS_ERR(dss_debugfs_dir)) { | ||
390 | int err = PTR_ERR(dss_debugfs_dir); | ||
391 | dss_debugfs_dir = NULL; | ||
392 | return err; | ||
393 | } | ||
394 | |||
395 | debugfs_create_file("clk", S_IRUGO, dss_debugfs_dir, | ||
396 | &dss_debug_dump_clocks, &dss_debug_fops); | ||
397 | |||
398 | debugfs_create_file("dss", S_IRUGO, dss_debugfs_dir, | ||
399 | &dss_dump_regs, &dss_debug_fops); | ||
400 | debugfs_create_file("dispc", S_IRUGO, dss_debugfs_dir, | ||
401 | &dispc_dump_regs, &dss_debug_fops); | ||
402 | #ifdef CONFIG_OMAP2_DSS_RFBI | ||
403 | debugfs_create_file("rfbi", S_IRUGO, dss_debugfs_dir, | ||
404 | &rfbi_dump_regs, &dss_debug_fops); | ||
405 | #endif | ||
406 | #ifdef CONFIG_OMAP2_DSS_DSI | ||
407 | debugfs_create_file("dsi", S_IRUGO, dss_debugfs_dir, | ||
408 | &dsi_dump_regs, &dss_debug_fops); | ||
409 | #endif | ||
410 | #ifdef CONFIG_OMAP2_DSS_VENC | ||
411 | debugfs_create_file("venc", S_IRUGO, dss_debugfs_dir, | ||
412 | &venc_dump_regs, &dss_debug_fops); | ||
413 | #endif | ||
414 | return 0; | ||
415 | } | ||
416 | |||
417 | static void dss_uninitialize_debugfs(void) | ||
418 | { | ||
419 | if (dss_debugfs_dir) | ||
420 | debugfs_remove_recursive(dss_debugfs_dir); | ||
421 | } | ||
422 | #endif /* CONFIG_DEBUG_FS && CONFIG_OMAP2_DSS_DEBUG_SUPPORT */ | ||
423 | |||
424 | /* PLATFORM DEVICE */ | ||
425 | static int omap_dss_probe(struct platform_device *pdev) | ||
426 | { | ||
427 | struct omap_dss_board_info *pdata = pdev->dev.platform_data; | ||
428 | int skip_init = 0; | ||
429 | int r; | ||
430 | int i; | ||
431 | |||
432 | core.pdev = pdev; | ||
433 | |||
434 | dss_init_overlay_managers(pdev); | ||
435 | dss_init_overlays(pdev); | ||
436 | |||
437 | r = dss_get_clocks(); | ||
438 | if (r) | ||
439 | goto fail0; | ||
440 | |||
441 | dss_clk_enable_all_no_ctx(); | ||
442 | |||
443 | core.ctx_id = dss_get_ctx_id(); | ||
444 | DSSDBG("initial ctx id %u\n", core.ctx_id); | ||
445 | |||
446 | #ifdef CONFIG_FB_OMAP_BOOTLOADER_INIT | ||
447 | /* DISPC_CONTROL */ | ||
448 | if (omap_readl(0x48050440) & 1) /* LCD enabled? */ | ||
449 | skip_init = 1; | ||
450 | #endif | ||
451 | |||
452 | r = dss_init(skip_init); | ||
453 | if (r) { | ||
454 | DSSERR("Failed to initialize DSS\n"); | ||
455 | goto fail0; | ||
456 | } | ||
457 | |||
458 | #ifdef CONFIG_OMAP2_DSS_RFBI | ||
459 | r = rfbi_init(); | ||
460 | if (r) { | ||
461 | DSSERR("Failed to initialize rfbi\n"); | ||
462 | goto fail0; | ||
463 | } | ||
464 | #endif | ||
465 | |||
466 | r = dpi_init(); | ||
467 | if (r) { | ||
468 | DSSERR("Failed to initialize dpi\n"); | ||
469 | goto fail0; | ||
470 | } | ||
471 | |||
472 | r = dispc_init(); | ||
473 | if (r) { | ||
474 | DSSERR("Failed to initialize dispc\n"); | ||
475 | goto fail0; | ||
476 | } | ||
477 | #ifdef CONFIG_OMAP2_DSS_VENC | ||
478 | r = venc_init(pdev); | ||
479 | if (r) { | ||
480 | DSSERR("Failed to initialize venc\n"); | ||
481 | goto fail0; | ||
482 | } | ||
483 | #endif | ||
484 | if (cpu_is_omap34xx()) { | ||
485 | #ifdef CONFIG_OMAP2_DSS_SDI | ||
486 | r = sdi_init(skip_init); | ||
487 | if (r) { | ||
488 | DSSERR("Failed to initialize SDI\n"); | ||
489 | goto fail0; | ||
490 | } | ||
491 | #endif | ||
492 | #ifdef CONFIG_OMAP2_DSS_DSI | ||
493 | r = dsi_init(pdev); | ||
494 | if (r) { | ||
495 | DSSERR("Failed to initialize DSI\n"); | ||
496 | goto fail0; | ||
497 | } | ||
498 | #endif | ||
499 | } | ||
500 | |||
501 | #if defined(CONFIG_DEBUG_FS) && defined(CONFIG_OMAP2_DSS_DEBUG_SUPPORT) | ||
502 | r = dss_initialize_debugfs(); | ||
503 | if (r) | ||
504 | goto fail0; | ||
505 | #endif | ||
506 | |||
507 | for (i = 0; i < pdata->num_devices; ++i) { | ||
508 | struct omap_dss_device *dssdev = pdata->devices[i]; | ||
509 | |||
510 | r = omap_dss_register_device(dssdev); | ||
511 | if (r) | ||
512 | DSSERR("device reg failed %d\n", i); | ||
513 | |||
514 | if (def_disp_name && strcmp(def_disp_name, dssdev->name) == 0) | ||
515 | pdata->default_device = dssdev; | ||
516 | } | ||
517 | |||
518 | dss_clk_disable_all(); | ||
519 | |||
520 | return 0; | ||
521 | |||
522 | /* XXX fail correctly */ | ||
523 | fail0: | ||
524 | return r; | ||
525 | } | ||
526 | |||
527 | static int omap_dss_remove(struct platform_device *pdev) | ||
528 | { | ||
529 | struct omap_dss_board_info *pdata = pdev->dev.platform_data; | ||
530 | int i; | ||
531 | int c; | ||
532 | |||
533 | #if defined(CONFIG_DEBUG_FS) && defined(CONFIG_OMAP2_DSS_DEBUG_SUPPORT) | ||
534 | dss_uninitialize_debugfs(); | ||
535 | #endif | ||
536 | |||
537 | #ifdef CONFIG_OMAP2_DSS_VENC | ||
538 | venc_exit(); | ||
539 | #endif | ||
540 | dispc_exit(); | ||
541 | dpi_exit(); | ||
542 | #ifdef CONFIG_OMAP2_DSS_RFBI | ||
543 | rfbi_exit(); | ||
544 | #endif | ||
545 | if (cpu_is_omap34xx()) { | ||
546 | #ifdef CONFIG_OMAP2_DSS_DSI | ||
547 | dsi_exit(); | ||
548 | #endif | ||
549 | #ifdef CONFIG_OMAP2_DSS_SDI | ||
550 | sdi_exit(); | ||
551 | #endif | ||
552 | } | ||
553 | |||
554 | dss_exit(); | ||
555 | |||
556 | /* these should be removed at some point */ | ||
557 | c = core.dss_ick->usecount; | ||
558 | if (c > 0) { | ||
559 | DSSERR("warning: dss_ick usecount %d, disabling\n", c); | ||
560 | while (c-- > 0) | ||
561 | clk_disable(core.dss_ick); | ||
562 | } | ||
563 | |||
564 | c = core.dss1_fck->usecount; | ||
565 | if (c > 0) { | ||
566 | DSSERR("warning: dss1_fck usecount %d, disabling\n", c); | ||
567 | while (c-- > 0) | ||
568 | clk_disable(core.dss1_fck); | ||
569 | } | ||
570 | |||
571 | c = core.dss2_fck->usecount; | ||
572 | if (c > 0) { | ||
573 | DSSERR("warning: dss2_fck usecount %d, disabling\n", c); | ||
574 | while (c-- > 0) | ||
575 | clk_disable(core.dss2_fck); | ||
576 | } | ||
577 | |||
578 | c = core.dss_54m_fck->usecount; | ||
579 | if (c > 0) { | ||
580 | DSSERR("warning: dss_54m_fck usecount %d, disabling\n", c); | ||
581 | while (c-- > 0) | ||
582 | clk_disable(core.dss_54m_fck); | ||
583 | } | ||
584 | |||
585 | if (core.dss_96m_fck) { | ||
586 | c = core.dss_96m_fck->usecount; | ||
587 | if (c > 0) { | ||
588 | DSSERR("warning: dss_96m_fck usecount %d, disabling\n", | ||
589 | c); | ||
590 | while (c-- > 0) | ||
591 | clk_disable(core.dss_96m_fck); | ||
592 | } | ||
593 | } | ||
594 | |||
595 | dss_put_clocks(); | ||
596 | |||
597 | dss_uninit_overlays(pdev); | ||
598 | dss_uninit_overlay_managers(pdev); | ||
599 | |||
600 | for (i = 0; i < pdata->num_devices; ++i) | ||
601 | omap_dss_unregister_device(pdata->devices[i]); | ||
602 | |||
603 | return 0; | ||
604 | } | ||
605 | |||
606 | static void omap_dss_shutdown(struct platform_device *pdev) | ||
607 | { | ||
608 | DSSDBG("shutdown\n"); | ||
609 | dss_disable_all_devices(); | ||
610 | } | ||
611 | |||
612 | static int omap_dss_suspend(struct platform_device *pdev, pm_message_t state) | ||
613 | { | ||
614 | DSSDBG("suspend %d\n", state.event); | ||
615 | |||
616 | return dss_suspend_all_devices(); | ||
617 | } | ||
618 | |||
619 | static int omap_dss_resume(struct platform_device *pdev) | ||
620 | { | ||
621 | DSSDBG("resume\n"); | ||
622 | |||
623 | return dss_resume_all_devices(); | ||
624 | } | ||
625 | |||
626 | static struct platform_driver omap_dss_driver = { | ||
627 | .probe = omap_dss_probe, | ||
628 | .remove = omap_dss_remove, | ||
629 | .shutdown = omap_dss_shutdown, | ||
630 | .suspend = omap_dss_suspend, | ||
631 | .resume = omap_dss_resume, | ||
632 | .driver = { | ||
633 | .name = "omapdss", | ||
634 | .owner = THIS_MODULE, | ||
635 | }, | ||
636 | }; | ||
637 | |||
638 | /* BUS */ | ||
639 | static int dss_bus_match(struct device *dev, struct device_driver *driver) | ||
640 | { | ||
641 | struct omap_dss_device *dssdev = to_dss_device(dev); | ||
642 | |||
643 | DSSDBG("bus_match. dev %s/%s, drv %s\n", | ||
644 | dev_name(dev), dssdev->driver_name, driver->name); | ||
645 | |||
646 | return strcmp(dssdev->driver_name, driver->name) == 0; | ||
647 | } | ||
648 | |||
649 | static ssize_t device_name_show(struct device *dev, | ||
650 | struct device_attribute *attr, char *buf) | ||
651 | { | ||
652 | struct omap_dss_device *dssdev = to_dss_device(dev); | ||
653 | return snprintf(buf, PAGE_SIZE, "%s\n", | ||
654 | dssdev->name ? | ||
655 | dssdev->name : ""); | ||
656 | } | ||
657 | |||
658 | static struct device_attribute default_dev_attrs[] = { | ||
659 | __ATTR(name, S_IRUGO, device_name_show, NULL), | ||
660 | __ATTR_NULL, | ||
661 | }; | ||
662 | |||
663 | static ssize_t driver_name_show(struct device_driver *drv, char *buf) | ||
664 | { | ||
665 | struct omap_dss_driver *dssdrv = to_dss_driver(drv); | ||
666 | return snprintf(buf, PAGE_SIZE, "%s\n", | ||
667 | dssdrv->driver.name ? | ||
668 | dssdrv->driver.name : ""); | ||
669 | } | ||
670 | static struct driver_attribute default_drv_attrs[] = { | ||
671 | __ATTR(name, S_IRUGO, driver_name_show, NULL), | ||
672 | __ATTR_NULL, | ||
673 | }; | ||
674 | |||
675 | static struct bus_type dss_bus_type = { | ||
676 | .name = "omapdss", | ||
677 | .match = dss_bus_match, | ||
678 | .dev_attrs = default_dev_attrs, | ||
679 | .drv_attrs = default_drv_attrs, | ||
680 | }; | ||
681 | |||
682 | static void dss_bus_release(struct device *dev) | ||
683 | { | ||
684 | DSSDBG("bus_release\n"); | ||
685 | } | ||
686 | |||
687 | static struct device dss_bus = { | ||
688 | .release = dss_bus_release, | ||
689 | }; | ||
690 | |||
691 | struct bus_type *dss_get_bus(void) | ||
692 | { | ||
693 | return &dss_bus_type; | ||
694 | } | ||
695 | |||
696 | /* DRIVER */ | ||
697 | static int dss_driver_probe(struct device *dev) | ||
698 | { | ||
699 | int r; | ||
700 | struct omap_dss_driver *dssdrv = to_dss_driver(dev->driver); | ||
701 | struct omap_dss_device *dssdev = to_dss_device(dev); | ||
702 | struct omap_dss_board_info *pdata = core.pdev->dev.platform_data; | ||
703 | bool force; | ||
704 | |||
705 | DSSDBG("driver_probe: dev %s/%s, drv %s\n", | ||
706 | dev_name(dev), dssdev->driver_name, | ||
707 | dssdrv->driver.name); | ||
708 | |||
709 | dss_init_device(core.pdev, dssdev); | ||
710 | |||
711 | /* skip this if the device is behind a ctrl */ | ||
712 | if (!dssdev->panel.ctrl) { | ||
713 | force = pdata->default_device == dssdev; | ||
714 | dss_recheck_connections(dssdev, force); | ||
715 | } | ||
716 | |||
717 | r = dssdrv->probe(dssdev); | ||
718 | |||
719 | if (r) { | ||
720 | DSSERR("driver probe failed: %d\n", r); | ||
721 | return r; | ||
722 | } | ||
723 | |||
724 | DSSDBG("probe done for device %s\n", dev_name(dev)); | ||
725 | |||
726 | dssdev->driver = dssdrv; | ||
727 | |||
728 | return 0; | ||
729 | } | ||
730 | |||
731 | static int dss_driver_remove(struct device *dev) | ||
732 | { | ||
733 | struct omap_dss_driver *dssdrv = to_dss_driver(dev->driver); | ||
734 | struct omap_dss_device *dssdev = to_dss_device(dev); | ||
735 | |||
736 | DSSDBG("driver_remove: dev %s/%s\n", dev_name(dev), | ||
737 | dssdev->driver_name); | ||
738 | |||
739 | dssdrv->remove(dssdev); | ||
740 | |||
741 | dss_uninit_device(core.pdev, dssdev); | ||
742 | |||
743 | dssdev->driver = NULL; | ||
744 | |||
745 | return 0; | ||
746 | } | ||
747 | |||
748 | int omap_dss_register_driver(struct omap_dss_driver *dssdriver) | ||
749 | { | ||
750 | dssdriver->driver.bus = &dss_bus_type; | ||
751 | dssdriver->driver.probe = dss_driver_probe; | ||
752 | dssdriver->driver.remove = dss_driver_remove; | ||
753 | return driver_register(&dssdriver->driver); | ||
754 | } | ||
755 | EXPORT_SYMBOL(omap_dss_register_driver); | ||
756 | |||
757 | void omap_dss_unregister_driver(struct omap_dss_driver *dssdriver) | ||
758 | { | ||
759 | driver_unregister(&dssdriver->driver); | ||
760 | } | ||
761 | EXPORT_SYMBOL(omap_dss_unregister_driver); | ||
762 | |||
763 | /* DEVICE */ | ||
764 | static void reset_device(struct device *dev, int check) | ||
765 | { | ||
766 | u8 *dev_p = (u8 *)dev; | ||
767 | u8 *dev_end = dev_p + sizeof(*dev); | ||
768 | void *saved_pdata; | ||
769 | |||
770 | saved_pdata = dev->platform_data; | ||
771 | if (check) { | ||
772 | /* | ||
773 | * Check if there is any other setting than platform_data | ||
774 | * in struct device; warn that these will be reset by our | ||
775 | * init. | ||
776 | */ | ||
777 | dev->platform_data = NULL; | ||
778 | while (dev_p < dev_end) { | ||
779 | if (*dev_p) { | ||
780 | WARN("%s: struct device fields will be " | ||
781 | "discarded\n", | ||
782 | __func__); | ||
783 | break; | ||
784 | } | ||
785 | dev_p++; | ||
786 | } | ||
787 | } | ||
788 | memset(dev, 0, sizeof(*dev)); | ||
789 | dev->platform_data = saved_pdata; | ||
790 | } | ||
791 | |||
792 | |||
793 | static void omap_dss_dev_release(struct device *dev) | ||
794 | { | ||
795 | reset_device(dev, 0); | ||
796 | } | ||
797 | |||
798 | int omap_dss_register_device(struct omap_dss_device *dssdev) | ||
799 | { | ||
800 | static int dev_num; | ||
801 | static int panel_num; | ||
802 | int r; | ||
803 | |||
804 | WARN_ON(!dssdev->driver_name); | ||
805 | |||
806 | reset_device(&dssdev->dev, 1); | ||
807 | dssdev->dev.bus = &dss_bus_type; | ||
808 | dssdev->dev.parent = &dss_bus; | ||
809 | dssdev->dev.release = omap_dss_dev_release; | ||
810 | dev_set_name(&dssdev->dev, "display%d", dev_num++); | ||
811 | r = device_register(&dssdev->dev); | ||
812 | if (r) | ||
813 | return r; | ||
814 | |||
815 | if (dssdev->ctrl.panel) { | ||
816 | struct omap_dss_device *panel = dssdev->ctrl.panel; | ||
817 | |||
818 | panel->panel.ctrl = dssdev; | ||
819 | |||
820 | reset_device(&panel->dev, 1); | ||
821 | panel->dev.bus = &dss_bus_type; | ||
822 | panel->dev.parent = &dssdev->dev; | ||
823 | panel->dev.release = omap_dss_dev_release; | ||
824 | dev_set_name(&panel->dev, "panel%d", panel_num++); | ||
825 | r = device_register(&panel->dev); | ||
826 | if (r) | ||
827 | return r; | ||
828 | } | ||
829 | |||
830 | return 0; | ||
831 | } | ||
832 | |||
833 | void omap_dss_unregister_device(struct omap_dss_device *dssdev) | ||
834 | { | ||
835 | device_unregister(&dssdev->dev); | ||
836 | |||
837 | if (dssdev->ctrl.panel) { | ||
838 | struct omap_dss_device *panel = dssdev->ctrl.panel; | ||
839 | device_unregister(&panel->dev); | ||
840 | } | ||
841 | } | ||
842 | |||
843 | /* BUS */ | ||
844 | static int omap_dss_bus_register(void) | ||
845 | { | ||
846 | int r; | ||
847 | |||
848 | r = bus_register(&dss_bus_type); | ||
849 | if (r) { | ||
850 | DSSERR("bus register failed\n"); | ||
851 | return r; | ||
852 | } | ||
853 | |||
854 | dev_set_name(&dss_bus, "omapdss"); | ||
855 | r = device_register(&dss_bus); | ||
856 | if (r) { | ||
857 | DSSERR("bus driver register failed\n"); | ||
858 | bus_unregister(&dss_bus_type); | ||
859 | return r; | ||
860 | } | ||
861 | |||
862 | return 0; | ||
863 | } | ||
864 | |||
865 | /* INIT */ | ||
866 | |||
867 | #ifdef CONFIG_OMAP2_DSS_MODULE | ||
868 | static void omap_dss_bus_unregister(void) | ||
869 | { | ||
870 | device_unregister(&dss_bus); | ||
871 | |||
872 | bus_unregister(&dss_bus_type); | ||
873 | } | ||
874 | |||
875 | static int __init omap_dss_init(void) | ||
876 | { | ||
877 | int r; | ||
878 | |||
879 | r = omap_dss_bus_register(); | ||
880 | if (r) | ||
881 | return r; | ||
882 | |||
883 | r = platform_driver_register(&omap_dss_driver); | ||
884 | if (r) { | ||
885 | omap_dss_bus_unregister(); | ||
886 | return r; | ||
887 | } | ||
888 | |||
889 | return 0; | ||
890 | } | ||
891 | |||
892 | static void __exit omap_dss_exit(void) | ||
893 | { | ||
894 | platform_driver_unregister(&omap_dss_driver); | ||
895 | |||
896 | omap_dss_bus_unregister(); | ||
897 | } | ||
898 | |||
899 | module_init(omap_dss_init); | ||
900 | module_exit(omap_dss_exit); | ||
901 | #else | ||
902 | static int __init omap_dss_init(void) | ||
903 | { | ||
904 | return omap_dss_bus_register(); | ||
905 | } | ||
906 | |||
907 | static int __init omap_dss_init2(void) | ||
908 | { | ||
909 | return platform_driver_register(&omap_dss_driver); | ||
910 | } | ||
911 | |||
912 | core_initcall(omap_dss_init); | ||
913 | device_initcall(omap_dss_init2); | ||
914 | #endif | ||
915 | |||
916 | MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@nokia.com>"); | ||
917 | MODULE_DESCRIPTION("OMAP2/3 Display Subsystem"); | ||
918 | MODULE_LICENSE("GPL v2"); | ||
919 | |||
diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c new file mode 100644 index 000000000000..6dabf4b2f005 --- /dev/null +++ b/drivers/video/omap2/dss/dispc.c | |||
@@ -0,0 +1,3091 @@ | |||
1 | /* | ||
2 | * linux/drivers/video/omap2/dss/dispc.c | ||
3 | * | ||
4 | * Copyright (C) 2009 Nokia Corporation | ||
5 | * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> | ||
6 | * | ||
7 | * Some code and ideas taken from drivers/video/omap/ driver | ||
8 | * by Imre Deak. | ||
9 | * | ||
10 | * This program is free software; you can redistribute it and/or modify it | ||
11 | * under the terms of the GNU General Public License version 2 as published by | ||
12 | * the Free Software Foundation. | ||
13 | * | ||
14 | * This program is distributed in the hope that it will be useful, but WITHOUT | ||
15 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | ||
16 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for | ||
17 | * more details. | ||
18 | * | ||
19 | * You should have received a copy of the GNU General Public License along with | ||
20 | * this program. If not, see <http://www.gnu.org/licenses/>. | ||
21 | */ | ||
22 | |||
23 | #define DSS_SUBSYS_NAME "DISPC" | ||
24 | |||
25 | #include <linux/kernel.h> | ||
26 | #include <linux/dma-mapping.h> | ||
27 | #include <linux/vmalloc.h> | ||
28 | #include <linux/clk.h> | ||
29 | #include <linux/io.h> | ||
30 | #include <linux/jiffies.h> | ||
31 | #include <linux/seq_file.h> | ||
32 | #include <linux/delay.h> | ||
33 | #include <linux/workqueue.h> | ||
34 | |||
35 | #include <plat/sram.h> | ||
36 | #include <plat/clock.h> | ||
37 | |||
38 | #include <plat/display.h> | ||
39 | |||
40 | #include "dss.h" | ||
41 | |||
42 | /* DISPC */ | ||
43 | #define DISPC_BASE 0x48050400 | ||
44 | |||
45 | #define DISPC_SZ_REGS SZ_1K | ||
46 | |||
47 | struct dispc_reg { u16 idx; }; | ||
48 | |||
49 | #define DISPC_REG(idx) ((const struct dispc_reg) { idx }) | ||
50 | |||
51 | /* DISPC common */ | ||
52 | #define DISPC_REVISION DISPC_REG(0x0000) | ||
53 | #define DISPC_SYSCONFIG DISPC_REG(0x0010) | ||
54 | #define DISPC_SYSSTATUS DISPC_REG(0x0014) | ||
55 | #define DISPC_IRQSTATUS DISPC_REG(0x0018) | ||
56 | #define DISPC_IRQENABLE DISPC_REG(0x001C) | ||
57 | #define DISPC_CONTROL DISPC_REG(0x0040) | ||
58 | #define DISPC_CONFIG DISPC_REG(0x0044) | ||
59 | #define DISPC_CAPABLE DISPC_REG(0x0048) | ||
60 | #define DISPC_DEFAULT_COLOR0 DISPC_REG(0x004C) | ||
61 | #define DISPC_DEFAULT_COLOR1 DISPC_REG(0x0050) | ||
62 | #define DISPC_TRANS_COLOR0 DISPC_REG(0x0054) | ||
63 | #define DISPC_TRANS_COLOR1 DISPC_REG(0x0058) | ||
64 | #define DISPC_LINE_STATUS DISPC_REG(0x005C) | ||
65 | #define DISPC_LINE_NUMBER DISPC_REG(0x0060) | ||
66 | #define DISPC_TIMING_H DISPC_REG(0x0064) | ||
67 | #define DISPC_TIMING_V DISPC_REG(0x0068) | ||
68 | #define DISPC_POL_FREQ DISPC_REG(0x006C) | ||
69 | #define DISPC_DIVISOR DISPC_REG(0x0070) | ||
70 | #define DISPC_GLOBAL_ALPHA DISPC_REG(0x0074) | ||
71 | #define DISPC_SIZE_DIG DISPC_REG(0x0078) | ||
72 | #define DISPC_SIZE_LCD DISPC_REG(0x007C) | ||
73 | |||
74 | /* DISPC GFX plane */ | ||
75 | #define DISPC_GFX_BA0 DISPC_REG(0x0080) | ||
76 | #define DISPC_GFX_BA1 DISPC_REG(0x0084) | ||
77 | #define DISPC_GFX_POSITION DISPC_REG(0x0088) | ||
78 | #define DISPC_GFX_SIZE DISPC_REG(0x008C) | ||
79 | #define DISPC_GFX_ATTRIBUTES DISPC_REG(0x00A0) | ||
80 | #define DISPC_GFX_FIFO_THRESHOLD DISPC_REG(0x00A4) | ||
81 | #define DISPC_GFX_FIFO_SIZE_STATUS DISPC_REG(0x00A8) | ||
82 | #define DISPC_GFX_ROW_INC DISPC_REG(0x00AC) | ||
83 | #define DISPC_GFX_PIXEL_INC DISPC_REG(0x00B0) | ||
84 | #define DISPC_GFX_WINDOW_SKIP DISPC_REG(0x00B4) | ||
85 | #define DISPC_GFX_TABLE_BA DISPC_REG(0x00B8) | ||
86 | |||
87 | #define DISPC_DATA_CYCLE1 DISPC_REG(0x01D4) | ||
88 | #define DISPC_DATA_CYCLE2 DISPC_REG(0x01D8) | ||
89 | #define DISPC_DATA_CYCLE3 DISPC_REG(0x01DC) | ||
90 | |||
91 | #define DISPC_CPR_COEF_R DISPC_REG(0x0220) | ||
92 | #define DISPC_CPR_COEF_G DISPC_REG(0x0224) | ||
93 | #define DISPC_CPR_COEF_B DISPC_REG(0x0228) | ||
94 | |||
95 | #define DISPC_GFX_PRELOAD DISPC_REG(0x022C) | ||
96 | |||
97 | /* DISPC Video plane, n = 0 for VID1 and n = 1 for VID2 */ | ||
98 | #define DISPC_VID_REG(n, idx) DISPC_REG(0x00BC + (n)*0x90 + idx) | ||
99 | |||
100 | #define DISPC_VID_BA0(n) DISPC_VID_REG(n, 0x0000) | ||
101 | #define DISPC_VID_BA1(n) DISPC_VID_REG(n, 0x0004) | ||
102 | #define DISPC_VID_POSITION(n) DISPC_VID_REG(n, 0x0008) | ||
103 | #define DISPC_VID_SIZE(n) DISPC_VID_REG(n, 0x000C) | ||
104 | #define DISPC_VID_ATTRIBUTES(n) DISPC_VID_REG(n, 0x0010) | ||
105 | #define DISPC_VID_FIFO_THRESHOLD(n) DISPC_VID_REG(n, 0x0014) | ||
106 | #define DISPC_VID_FIFO_SIZE_STATUS(n) DISPC_VID_REG(n, 0x0018) | ||
107 | #define DISPC_VID_ROW_INC(n) DISPC_VID_REG(n, 0x001C) | ||
108 | #define DISPC_VID_PIXEL_INC(n) DISPC_VID_REG(n, 0x0020) | ||
109 | #define DISPC_VID_FIR(n) DISPC_VID_REG(n, 0x0024) | ||
110 | #define DISPC_VID_PICTURE_SIZE(n) DISPC_VID_REG(n, 0x0028) | ||
111 | #define DISPC_VID_ACCU0(n) DISPC_VID_REG(n, 0x002C) | ||
112 | #define DISPC_VID_ACCU1(n) DISPC_VID_REG(n, 0x0030) | ||
113 | |||
114 | /* coef index i = {0, 1, 2, 3, 4, 5, 6, 7} */ | ||
115 | #define DISPC_VID_FIR_COEF_H(n, i) DISPC_REG(0x00F0 + (n)*0x90 + (i)*0x8) | ||
116 | /* coef index i = {0, 1, 2, 3, 4, 5, 6, 7} */ | ||
117 | #define DISPC_VID_FIR_COEF_HV(n, i) DISPC_REG(0x00F4 + (n)*0x90 + (i)*0x8) | ||
118 | /* coef index i = {0, 1, 2, 3, 4} */ | ||
119 | #define DISPC_VID_CONV_COEF(n, i) DISPC_REG(0x0130 + (n)*0x90 + (i)*0x4) | ||
120 | /* coef index i = {0, 1, 2, 3, 4, 5, 6, 7} */ | ||
121 | #define DISPC_VID_FIR_COEF_V(n, i) DISPC_REG(0x01E0 + (n)*0x20 + (i)*0x4) | ||
122 | |||
123 | #define DISPC_VID_PRELOAD(n) DISPC_REG(0x230 + (n)*0x04) | ||
124 | |||
125 | |||
126 | #define DISPC_IRQ_MASK_ERROR (DISPC_IRQ_GFX_FIFO_UNDERFLOW | \ | ||
127 | DISPC_IRQ_OCP_ERR | \ | ||
128 | DISPC_IRQ_VID1_FIFO_UNDERFLOW | \ | ||
129 | DISPC_IRQ_VID2_FIFO_UNDERFLOW | \ | ||
130 | DISPC_IRQ_SYNC_LOST | \ | ||
131 | DISPC_IRQ_SYNC_LOST_DIGIT) | ||
132 | |||
133 | #define DISPC_MAX_NR_ISRS 8 | ||
134 | |||
135 | struct omap_dispc_isr_data { | ||
136 | omap_dispc_isr_t isr; | ||
137 | void *arg; | ||
138 | u32 mask; | ||
139 | }; | ||
140 | |||
141 | #define REG_GET(idx, start, end) \ | ||
142 | FLD_GET(dispc_read_reg(idx), start, end) | ||
143 | |||
144 | #define REG_FLD_MOD(idx, val, start, end) \ | ||
145 | dispc_write_reg(idx, FLD_MOD(dispc_read_reg(idx), val, start, end)) | ||
146 | |||
147 | static const struct dispc_reg dispc_reg_att[] = { DISPC_GFX_ATTRIBUTES, | ||
148 | DISPC_VID_ATTRIBUTES(0), | ||
149 | DISPC_VID_ATTRIBUTES(1) }; | ||
150 | |||
151 | static struct { | ||
152 | void __iomem *base; | ||
153 | |||
154 | u32 fifo_size[3]; | ||
155 | |||
156 | spinlock_t irq_lock; | ||
157 | u32 irq_error_mask; | ||
158 | struct omap_dispc_isr_data registered_isr[DISPC_MAX_NR_ISRS]; | ||
159 | u32 error_irqs; | ||
160 | struct work_struct error_work; | ||
161 | |||
162 | u32 ctx[DISPC_SZ_REGS / sizeof(u32)]; | ||
163 | } dispc; | ||
164 | |||
165 | static void _omap_dispc_set_irqs(void); | ||
166 | |||
167 | static inline void dispc_write_reg(const struct dispc_reg idx, u32 val) | ||
168 | { | ||
169 | __raw_writel(val, dispc.base + idx.idx); | ||
170 | } | ||
171 | |||
172 | static inline u32 dispc_read_reg(const struct dispc_reg idx) | ||
173 | { | ||
174 | return __raw_readl(dispc.base + idx.idx); | ||
175 | } | ||
176 | |||
177 | #define SR(reg) \ | ||
178 | dispc.ctx[(DISPC_##reg).idx / sizeof(u32)] = dispc_read_reg(DISPC_##reg) | ||
179 | #define RR(reg) \ | ||
180 | dispc_write_reg(DISPC_##reg, dispc.ctx[(DISPC_##reg).idx / sizeof(u32)]) | ||
181 | |||
182 | void dispc_save_context(void) | ||
183 | { | ||
184 | if (cpu_is_omap24xx()) | ||
185 | return; | ||
186 | |||
187 | SR(SYSCONFIG); | ||
188 | SR(IRQENABLE); | ||
189 | SR(CONTROL); | ||
190 | SR(CONFIG); | ||
191 | SR(DEFAULT_COLOR0); | ||
192 | SR(DEFAULT_COLOR1); | ||
193 | SR(TRANS_COLOR0); | ||
194 | SR(TRANS_COLOR1); | ||
195 | SR(LINE_NUMBER); | ||
196 | SR(TIMING_H); | ||
197 | SR(TIMING_V); | ||
198 | SR(POL_FREQ); | ||
199 | SR(DIVISOR); | ||
200 | SR(GLOBAL_ALPHA); | ||
201 | SR(SIZE_DIG); | ||
202 | SR(SIZE_LCD); | ||
203 | |||
204 | SR(GFX_BA0); | ||
205 | SR(GFX_BA1); | ||
206 | SR(GFX_POSITION); | ||
207 | SR(GFX_SIZE); | ||
208 | SR(GFX_ATTRIBUTES); | ||
209 | SR(GFX_FIFO_THRESHOLD); | ||
210 | SR(GFX_ROW_INC); | ||
211 | SR(GFX_PIXEL_INC); | ||
212 | SR(GFX_WINDOW_SKIP); | ||
213 | SR(GFX_TABLE_BA); | ||
214 | |||
215 | SR(DATA_CYCLE1); | ||
216 | SR(DATA_CYCLE2); | ||
217 | SR(DATA_CYCLE3); | ||
218 | |||
219 | SR(CPR_COEF_R); | ||
220 | SR(CPR_COEF_G); | ||
221 | SR(CPR_COEF_B); | ||
222 | |||
223 | SR(GFX_PRELOAD); | ||
224 | |||
225 | /* VID1 */ | ||
226 | SR(VID_BA0(0)); | ||
227 | SR(VID_BA1(0)); | ||
228 | SR(VID_POSITION(0)); | ||
229 | SR(VID_SIZE(0)); | ||
230 | SR(VID_ATTRIBUTES(0)); | ||
231 | SR(VID_FIFO_THRESHOLD(0)); | ||
232 | SR(VID_ROW_INC(0)); | ||
233 | SR(VID_PIXEL_INC(0)); | ||
234 | SR(VID_FIR(0)); | ||
235 | SR(VID_PICTURE_SIZE(0)); | ||
236 | SR(VID_ACCU0(0)); | ||
237 | SR(VID_ACCU1(0)); | ||
238 | |||
239 | SR(VID_FIR_COEF_H(0, 0)); | ||
240 | SR(VID_FIR_COEF_H(0, 1)); | ||
241 | SR(VID_FIR_COEF_H(0, 2)); | ||
242 | SR(VID_FIR_COEF_H(0, 3)); | ||
243 | SR(VID_FIR_COEF_H(0, 4)); | ||
244 | SR(VID_FIR_COEF_H(0, 5)); | ||
245 | SR(VID_FIR_COEF_H(0, 6)); | ||
246 | SR(VID_FIR_COEF_H(0, 7)); | ||
247 | |||
248 | SR(VID_FIR_COEF_HV(0, 0)); | ||
249 | SR(VID_FIR_COEF_HV(0, 1)); | ||
250 | SR(VID_FIR_COEF_HV(0, 2)); | ||
251 | SR(VID_FIR_COEF_HV(0, 3)); | ||
252 | SR(VID_FIR_COEF_HV(0, 4)); | ||
253 | SR(VID_FIR_COEF_HV(0, 5)); | ||
254 | SR(VID_FIR_COEF_HV(0, 6)); | ||
255 | SR(VID_FIR_COEF_HV(0, 7)); | ||
256 | |||
257 | SR(VID_CONV_COEF(0, 0)); | ||
258 | SR(VID_CONV_COEF(0, 1)); | ||
259 | SR(VID_CONV_COEF(0, 2)); | ||
260 | SR(VID_CONV_COEF(0, 3)); | ||
261 | SR(VID_CONV_COEF(0, 4)); | ||
262 | |||
263 | SR(VID_FIR_COEF_V(0, 0)); | ||
264 | SR(VID_FIR_COEF_V(0, 1)); | ||
265 | SR(VID_FIR_COEF_V(0, 2)); | ||
266 | SR(VID_FIR_COEF_V(0, 3)); | ||
267 | SR(VID_FIR_COEF_V(0, 4)); | ||
268 | SR(VID_FIR_COEF_V(0, 5)); | ||
269 | SR(VID_FIR_COEF_V(0, 6)); | ||
270 | SR(VID_FIR_COEF_V(0, 7)); | ||
271 | |||
272 | SR(VID_PRELOAD(0)); | ||
273 | |||
274 | /* VID2 */ | ||
275 | SR(VID_BA0(1)); | ||
276 | SR(VID_BA1(1)); | ||
277 | SR(VID_POSITION(1)); | ||
278 | SR(VID_SIZE(1)); | ||
279 | SR(VID_ATTRIBUTES(1)); | ||
280 | SR(VID_FIFO_THRESHOLD(1)); | ||
281 | SR(VID_ROW_INC(1)); | ||
282 | SR(VID_PIXEL_INC(1)); | ||
283 | SR(VID_FIR(1)); | ||
284 | SR(VID_PICTURE_SIZE(1)); | ||
285 | SR(VID_ACCU0(1)); | ||
286 | SR(VID_ACCU1(1)); | ||
287 | |||
288 | SR(VID_FIR_COEF_H(1, 0)); | ||
289 | SR(VID_FIR_COEF_H(1, 1)); | ||
290 | SR(VID_FIR_COEF_H(1, 2)); | ||
291 | SR(VID_FIR_COEF_H(1, 3)); | ||
292 | SR(VID_FIR_COEF_H(1, 4)); | ||
293 | SR(VID_FIR_COEF_H(1, 5)); | ||
294 | SR(VID_FIR_COEF_H(1, 6)); | ||
295 | SR(VID_FIR_COEF_H(1, 7)); | ||
296 | |||
297 | SR(VID_FIR_COEF_HV(1, 0)); | ||
298 | SR(VID_FIR_COEF_HV(1, 1)); | ||
299 | SR(VID_FIR_COEF_HV(1, 2)); | ||
300 | SR(VID_FIR_COEF_HV(1, 3)); | ||
301 | SR(VID_FIR_COEF_HV(1, 4)); | ||
302 | SR(VID_FIR_COEF_HV(1, 5)); | ||
303 | SR(VID_FIR_COEF_HV(1, 6)); | ||
304 | SR(VID_FIR_COEF_HV(1, 7)); | ||
305 | |||
306 | SR(VID_CONV_COEF(1, 0)); | ||
307 | SR(VID_CONV_COEF(1, 1)); | ||
308 | SR(VID_CONV_COEF(1, 2)); | ||
309 | SR(VID_CONV_COEF(1, 3)); | ||
310 | SR(VID_CONV_COEF(1, 4)); | ||
311 | |||
312 | SR(VID_FIR_COEF_V(1, 0)); | ||
313 | SR(VID_FIR_COEF_V(1, 1)); | ||
314 | SR(VID_FIR_COEF_V(1, 2)); | ||
315 | SR(VID_FIR_COEF_V(1, 3)); | ||
316 | SR(VID_FIR_COEF_V(1, 4)); | ||
317 | SR(VID_FIR_COEF_V(1, 5)); | ||
318 | SR(VID_FIR_COEF_V(1, 6)); | ||
319 | SR(VID_FIR_COEF_V(1, 7)); | ||
320 | |||
321 | SR(VID_PRELOAD(1)); | ||
322 | } | ||
323 | |||
324 | void dispc_restore_context(void) | ||
325 | { | ||
326 | RR(SYSCONFIG); | ||
327 | RR(IRQENABLE); | ||
328 | /*RR(CONTROL);*/ | ||
329 | RR(CONFIG); | ||
330 | RR(DEFAULT_COLOR0); | ||
331 | RR(DEFAULT_COLOR1); | ||
332 | RR(TRANS_COLOR0); | ||
333 | RR(TRANS_COLOR1); | ||
334 | RR(LINE_NUMBER); | ||
335 | RR(TIMING_H); | ||
336 | RR(TIMING_V); | ||
337 | RR(POL_FREQ); | ||
338 | RR(DIVISOR); | ||
339 | RR(GLOBAL_ALPHA); | ||
340 | RR(SIZE_DIG); | ||
341 | RR(SIZE_LCD); | ||
342 | |||
343 | RR(GFX_BA0); | ||
344 | RR(GFX_BA1); | ||
345 | RR(GFX_POSITION); | ||
346 | RR(GFX_SIZE); | ||
347 | RR(GFX_ATTRIBUTES); | ||
348 | RR(GFX_FIFO_THRESHOLD); | ||
349 | RR(GFX_ROW_INC); | ||
350 | RR(GFX_PIXEL_INC); | ||
351 | RR(GFX_WINDOW_SKIP); | ||
352 | RR(GFX_TABLE_BA); | ||
353 | |||
354 | RR(DATA_CYCLE1); | ||
355 | RR(DATA_CYCLE2); | ||
356 | RR(DATA_CYCLE3); | ||
357 | |||
358 | RR(CPR_COEF_R); | ||
359 | RR(CPR_COEF_G); | ||
360 | RR(CPR_COEF_B); | ||
361 | |||
362 | RR(GFX_PRELOAD); | ||
363 | |||
364 | /* VID1 */ | ||
365 | RR(VID_BA0(0)); | ||
366 | RR(VID_BA1(0)); | ||
367 | RR(VID_POSITION(0)); | ||
368 | RR(VID_SIZE(0)); | ||
369 | RR(VID_ATTRIBUTES(0)); | ||
370 | RR(VID_FIFO_THRESHOLD(0)); | ||
371 | RR(VID_ROW_INC(0)); | ||
372 | RR(VID_PIXEL_INC(0)); | ||
373 | RR(VID_FIR(0)); | ||
374 | RR(VID_PICTURE_SIZE(0)); | ||
375 | RR(VID_ACCU0(0)); | ||
376 | RR(VID_ACCU1(0)); | ||
377 | |||
378 | RR(VID_FIR_COEF_H(0, 0)); | ||
379 | RR(VID_FIR_COEF_H(0, 1)); | ||
380 | RR(VID_FIR_COEF_H(0, 2)); | ||
381 | RR(VID_FIR_COEF_H(0, 3)); | ||
382 | RR(VID_FIR_COEF_H(0, 4)); | ||
383 | RR(VID_FIR_COEF_H(0, 5)); | ||
384 | RR(VID_FIR_COEF_H(0, 6)); | ||
385 | RR(VID_FIR_COEF_H(0, 7)); | ||
386 | |||
387 | RR(VID_FIR_COEF_HV(0, 0)); | ||
388 | RR(VID_FIR_COEF_HV(0, 1)); | ||
389 | RR(VID_FIR_COEF_HV(0, 2)); | ||
390 | RR(VID_FIR_COEF_HV(0, 3)); | ||
391 | RR(VID_FIR_COEF_HV(0, 4)); | ||
392 | RR(VID_FIR_COEF_HV(0, 5)); | ||
393 | RR(VID_FIR_COEF_HV(0, 6)); | ||
394 | RR(VID_FIR_COEF_HV(0, 7)); | ||
395 | |||
396 | RR(VID_CONV_COEF(0, 0)); | ||
397 | RR(VID_CONV_COEF(0, 1)); | ||
398 | RR(VID_CONV_COEF(0, 2)); | ||
399 | RR(VID_CONV_COEF(0, 3)); | ||
400 | RR(VID_CONV_COEF(0, 4)); | ||
401 | |||
402 | RR(VID_FIR_COEF_V(0, 0)); | ||
403 | RR(VID_FIR_COEF_V(0, 1)); | ||
404 | RR(VID_FIR_COEF_V(0, 2)); | ||
405 | RR(VID_FIR_COEF_V(0, 3)); | ||
406 | RR(VID_FIR_COEF_V(0, 4)); | ||
407 | RR(VID_FIR_COEF_V(0, 5)); | ||
408 | RR(VID_FIR_COEF_V(0, 6)); | ||
409 | RR(VID_FIR_COEF_V(0, 7)); | ||
410 | |||
411 | RR(VID_PRELOAD(0)); | ||
412 | |||
413 | /* VID2 */ | ||
414 | RR(VID_BA0(1)); | ||
415 | RR(VID_BA1(1)); | ||
416 | RR(VID_POSITION(1)); | ||
417 | RR(VID_SIZE(1)); | ||
418 | RR(VID_ATTRIBUTES(1)); | ||
419 | RR(VID_FIFO_THRESHOLD(1)); | ||
420 | RR(VID_ROW_INC(1)); | ||
421 | RR(VID_PIXEL_INC(1)); | ||
422 | RR(VID_FIR(1)); | ||
423 | RR(VID_PICTURE_SIZE(1)); | ||
424 | RR(VID_ACCU0(1)); | ||
425 | RR(VID_ACCU1(1)); | ||
426 | |||
427 | RR(VID_FIR_COEF_H(1, 0)); | ||
428 | RR(VID_FIR_COEF_H(1, 1)); | ||
429 | RR(VID_FIR_COEF_H(1, 2)); | ||
430 | RR(VID_FIR_COEF_H(1, 3)); | ||
431 | RR(VID_FIR_COEF_H(1, 4)); | ||
432 | RR(VID_FIR_COEF_H(1, 5)); | ||
433 | RR(VID_FIR_COEF_H(1, 6)); | ||
434 | RR(VID_FIR_COEF_H(1, 7)); | ||
435 | |||
436 | RR(VID_FIR_COEF_HV(1, 0)); | ||
437 | RR(VID_FIR_COEF_HV(1, 1)); | ||
438 | RR(VID_FIR_COEF_HV(1, 2)); | ||
439 | RR(VID_FIR_COEF_HV(1, 3)); | ||
440 | RR(VID_FIR_COEF_HV(1, 4)); | ||
441 | RR(VID_FIR_COEF_HV(1, 5)); | ||
442 | RR(VID_FIR_COEF_HV(1, 6)); | ||
443 | RR(VID_FIR_COEF_HV(1, 7)); | ||
444 | |||
445 | RR(VID_CONV_COEF(1, 0)); | ||
446 | RR(VID_CONV_COEF(1, 1)); | ||
447 | RR(VID_CONV_COEF(1, 2)); | ||
448 | RR(VID_CONV_COEF(1, 3)); | ||
449 | RR(VID_CONV_COEF(1, 4)); | ||
450 | |||
451 | RR(VID_FIR_COEF_V(1, 0)); | ||
452 | RR(VID_FIR_COEF_V(1, 1)); | ||
453 | RR(VID_FIR_COEF_V(1, 2)); | ||
454 | RR(VID_FIR_COEF_V(1, 3)); | ||
455 | RR(VID_FIR_COEF_V(1, 4)); | ||
456 | RR(VID_FIR_COEF_V(1, 5)); | ||
457 | RR(VID_FIR_COEF_V(1, 6)); | ||
458 | RR(VID_FIR_COEF_V(1, 7)); | ||
459 | |||
460 | RR(VID_PRELOAD(1)); | ||
461 | |||
462 | /* enable last, because LCD & DIGIT enable are here */ | ||
463 | RR(CONTROL); | ||
464 | } | ||
465 | |||
466 | #undef SR | ||
467 | #undef RR | ||
468 | |||
469 | static inline void enable_clocks(bool enable) | ||
470 | { | ||
471 | if (enable) | ||
472 | dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); | ||
473 | else | ||
474 | dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); | ||
475 | } | ||
476 | |||
477 | bool dispc_go_busy(enum omap_channel channel) | ||
478 | { | ||
479 | int bit; | ||
480 | |||
481 | if (channel == OMAP_DSS_CHANNEL_LCD) | ||
482 | bit = 5; /* GOLCD */ | ||
483 | else | ||
484 | bit = 6; /* GODIGIT */ | ||
485 | |||
486 | return REG_GET(DISPC_CONTROL, bit, bit) == 1; | ||
487 | } | ||
488 | |||
489 | void dispc_go(enum omap_channel channel) | ||
490 | { | ||
491 | int bit; | ||
492 | |||
493 | enable_clocks(1); | ||
494 | |||
495 | if (channel == OMAP_DSS_CHANNEL_LCD) | ||
496 | bit = 0; /* LCDENABLE */ | ||
497 | else | ||
498 | bit = 1; /* DIGITALENABLE */ | ||
499 | |||
500 | /* if the channel is not enabled, we don't need GO */ | ||
501 | if (REG_GET(DISPC_CONTROL, bit, bit) == 0) | ||
502 | goto end; | ||
503 | |||
504 | if (channel == OMAP_DSS_CHANNEL_LCD) | ||
505 | bit = 5; /* GOLCD */ | ||
506 | else | ||
507 | bit = 6; /* GODIGIT */ | ||
508 | |||
509 | if (REG_GET(DISPC_CONTROL, bit, bit) == 1) { | ||
510 | DSSERR("GO bit not down for channel %d\n", channel); | ||
511 | goto end; | ||
512 | } | ||
513 | |||
514 | DSSDBG("GO %s\n", channel == OMAP_DSS_CHANNEL_LCD ? "LCD" : "DIGIT"); | ||
515 | |||
516 | REG_FLD_MOD(DISPC_CONTROL, 1, bit, bit); | ||
517 | end: | ||
518 | enable_clocks(0); | ||
519 | } | ||
520 | |||
521 | static void _dispc_write_firh_reg(enum omap_plane plane, int reg, u32 value) | ||
522 | { | ||
523 | BUG_ON(plane == OMAP_DSS_GFX); | ||
524 | |||
525 | dispc_write_reg(DISPC_VID_FIR_COEF_H(plane-1, reg), value); | ||
526 | } | ||
527 | |||
528 | static void _dispc_write_firhv_reg(enum omap_plane plane, int reg, u32 value) | ||
529 | { | ||
530 | BUG_ON(plane == OMAP_DSS_GFX); | ||
531 | |||
532 | dispc_write_reg(DISPC_VID_FIR_COEF_HV(plane-1, reg), value); | ||
533 | } | ||
534 | |||
535 | static void _dispc_write_firv_reg(enum omap_plane plane, int reg, u32 value) | ||
536 | { | ||
537 | BUG_ON(plane == OMAP_DSS_GFX); | ||
538 | |||
539 | dispc_write_reg(DISPC_VID_FIR_COEF_V(plane-1, reg), value); | ||
540 | } | ||
541 | |||
542 | static void _dispc_set_scale_coef(enum omap_plane plane, int hscaleup, | ||
543 | int vscaleup, int five_taps) | ||
544 | { | ||
545 | /* Coefficients for horizontal up-sampling */ | ||
546 | static const u32 coef_hup[8] = { | ||
547 | 0x00800000, | ||
548 | 0x0D7CF800, | ||
549 | 0x1E70F5FF, | ||
550 | 0x335FF5FE, | ||
551 | 0xF74949F7, | ||
552 | 0xF55F33FB, | ||
553 | 0xF5701EFE, | ||
554 | 0xF87C0DFF, | ||
555 | }; | ||
556 | |||
557 | /* Coefficients for horizontal down-sampling */ | ||
558 | static const u32 coef_hdown[8] = { | ||
559 | 0x24382400, | ||
560 | 0x28371FFE, | ||
561 | 0x2C361BFB, | ||
562 | 0x303516F9, | ||
563 | 0x11343311, | ||
564 | 0x1635300C, | ||
565 | 0x1B362C08, | ||
566 | 0x1F372804, | ||
567 | }; | ||
568 | |||
569 | /* Coefficients for horizontal and vertical up-sampling */ | ||
570 | static const u32 coef_hvup[2][8] = { | ||
571 | { | ||
572 | 0x00800000, | ||
573 | 0x037B02FF, | ||
574 | 0x0C6F05FE, | ||
575 | 0x205907FB, | ||
576 | 0x00404000, | ||
577 | 0x075920FE, | ||
578 | 0x056F0CFF, | ||
579 | 0x027B0300, | ||
580 | }, | ||
581 | { | ||
582 | 0x00800000, | ||
583 | 0x0D7CF8FF, | ||
584 | 0x1E70F5FE, | ||
585 | 0x335FF5FB, | ||
586 | 0xF7404000, | ||
587 | 0xF55F33FE, | ||
588 | 0xF5701EFF, | ||
589 | 0xF87C0D00, | ||
590 | }, | ||
591 | }; | ||
592 | |||
593 | /* Coefficients for horizontal and vertical down-sampling */ | ||
594 | static const u32 coef_hvdown[2][8] = { | ||
595 | { | ||
596 | 0x24382400, | ||
597 | 0x28391F04, | ||
598 | 0x2D381B08, | ||
599 | 0x3237170C, | ||
600 | 0x123737F7, | ||
601 | 0x173732F9, | ||
602 | 0x1B382DFB, | ||
603 | 0x1F3928FE, | ||
604 | }, | ||
605 | { | ||
606 | 0x24382400, | ||
607 | 0x28371F04, | ||
608 | 0x2C361B08, | ||
609 | 0x3035160C, | ||
610 | 0x113433F7, | ||
611 | 0x163530F9, | ||
612 | 0x1B362CFB, | ||
613 | 0x1F3728FE, | ||
614 | }, | ||
615 | }; | ||
616 | |||
617 | /* Coefficients for vertical up-sampling */ | ||
618 | static const u32 coef_vup[8] = { | ||
619 | 0x00000000, | ||
620 | 0x0000FF00, | ||
621 | 0x0000FEFF, | ||
622 | 0x0000FBFE, | ||
623 | 0x000000F7, | ||
624 | 0x0000FEFB, | ||
625 | 0x0000FFFE, | ||
626 | 0x000000FF, | ||
627 | }; | ||
628 | |||
629 | |||
630 | /* Coefficients for vertical down-sampling */ | ||
631 | static const u32 coef_vdown[8] = { | ||
632 | 0x00000000, | ||
633 | 0x000004FE, | ||
634 | 0x000008FB, | ||
635 | 0x00000CF9, | ||
636 | 0x0000F711, | ||
637 | 0x0000F90C, | ||
638 | 0x0000FB08, | ||
639 | 0x0000FE04, | ||
640 | }; | ||
641 | |||
642 | const u32 *h_coef; | ||
643 | const u32 *hv_coef; | ||
644 | const u32 *hv_coef_mod; | ||
645 | const u32 *v_coef; | ||
646 | int i; | ||
647 | |||
648 | if (hscaleup) | ||
649 | h_coef = coef_hup; | ||
650 | else | ||
651 | h_coef = coef_hdown; | ||
652 | |||
653 | if (vscaleup) { | ||
654 | hv_coef = coef_hvup[five_taps]; | ||
655 | v_coef = coef_vup; | ||
656 | |||
657 | if (hscaleup) | ||
658 | hv_coef_mod = NULL; | ||
659 | else | ||
660 | hv_coef_mod = coef_hvdown[five_taps]; | ||
661 | } else { | ||
662 | hv_coef = coef_hvdown[five_taps]; | ||
663 | v_coef = coef_vdown; | ||
664 | |||
665 | if (hscaleup) | ||
666 | hv_coef_mod = coef_hvup[five_taps]; | ||
667 | else | ||
668 | hv_coef_mod = NULL; | ||
669 | } | ||
670 | |||
671 | for (i = 0; i < 8; i++) { | ||
672 | u32 h, hv; | ||
673 | |||
674 | h = h_coef[i]; | ||
675 | |||
676 | hv = hv_coef[i]; | ||
677 | |||
678 | if (hv_coef_mod) { | ||
679 | hv &= 0xffffff00; | ||
680 | hv |= (hv_coef_mod[i] & 0xff); | ||
681 | } | ||
682 | |||
683 | _dispc_write_firh_reg(plane, i, h); | ||
684 | _dispc_write_firhv_reg(plane, i, hv); | ||
685 | } | ||
686 | |||
687 | if (!five_taps) | ||
688 | return; | ||
689 | |||
690 | for (i = 0; i < 8; i++) { | ||
691 | u32 v; | ||
692 | v = v_coef[i]; | ||
693 | _dispc_write_firv_reg(plane, i, v); | ||
694 | } | ||
695 | } | ||
696 | |||
697 | static void _dispc_setup_color_conv_coef(void) | ||
698 | { | ||
699 | const struct color_conv_coef { | ||
700 | int ry, rcr, rcb, gy, gcr, gcb, by, bcr, bcb; | ||
701 | int full_range; | ||
702 | } ctbl_bt601_5 = { | ||
703 | 298, 409, 0, 298, -208, -100, 298, 0, 517, 0, | ||
704 | }; | ||
705 | |||
706 | const struct color_conv_coef *ct; | ||
707 | |||
708 | #define CVAL(x, y) (FLD_VAL(x, 26, 16) | FLD_VAL(y, 10, 0)) | ||
709 | |||
710 | ct = &ctbl_bt601_5; | ||
711 | |||
712 | dispc_write_reg(DISPC_VID_CONV_COEF(0, 0), CVAL(ct->rcr, ct->ry)); | ||
713 | dispc_write_reg(DISPC_VID_CONV_COEF(0, 1), CVAL(ct->gy, ct->rcb)); | ||
714 | dispc_write_reg(DISPC_VID_CONV_COEF(0, 2), CVAL(ct->gcb, ct->gcr)); | ||
715 | dispc_write_reg(DISPC_VID_CONV_COEF(0, 3), CVAL(ct->bcr, ct->by)); | ||
716 | dispc_write_reg(DISPC_VID_CONV_COEF(0, 4), CVAL(0, ct->bcb)); | ||
717 | |||
718 | dispc_write_reg(DISPC_VID_CONV_COEF(1, 0), CVAL(ct->rcr, ct->ry)); | ||
719 | dispc_write_reg(DISPC_VID_CONV_COEF(1, 1), CVAL(ct->gy, ct->rcb)); | ||
720 | dispc_write_reg(DISPC_VID_CONV_COEF(1, 2), CVAL(ct->gcb, ct->gcr)); | ||
721 | dispc_write_reg(DISPC_VID_CONV_COEF(1, 3), CVAL(ct->bcr, ct->by)); | ||
722 | dispc_write_reg(DISPC_VID_CONV_COEF(1, 4), CVAL(0, ct->bcb)); | ||
723 | |||
724 | #undef CVAL | ||
725 | |||
726 | REG_FLD_MOD(DISPC_VID_ATTRIBUTES(0), ct->full_range, 11, 11); | ||
727 | REG_FLD_MOD(DISPC_VID_ATTRIBUTES(1), ct->full_range, 11, 11); | ||
728 | } | ||
729 | |||
730 | |||
731 | static void _dispc_set_plane_ba0(enum omap_plane plane, u32 paddr) | ||
732 | { | ||
733 | const struct dispc_reg ba0_reg[] = { DISPC_GFX_BA0, | ||
734 | DISPC_VID_BA0(0), | ||
735 | DISPC_VID_BA0(1) }; | ||
736 | |||
737 | dispc_write_reg(ba0_reg[plane], paddr); | ||
738 | } | ||
739 | |||
740 | static void _dispc_set_plane_ba1(enum omap_plane plane, u32 paddr) | ||
741 | { | ||
742 | const struct dispc_reg ba1_reg[] = { DISPC_GFX_BA1, | ||
743 | DISPC_VID_BA1(0), | ||
744 | DISPC_VID_BA1(1) }; | ||
745 | |||
746 | dispc_write_reg(ba1_reg[plane], paddr); | ||
747 | } | ||
748 | |||
749 | static void _dispc_set_plane_pos(enum omap_plane plane, int x, int y) | ||
750 | { | ||
751 | const struct dispc_reg pos_reg[] = { DISPC_GFX_POSITION, | ||
752 | DISPC_VID_POSITION(0), | ||
753 | DISPC_VID_POSITION(1) }; | ||
754 | |||
755 | u32 val = FLD_VAL(y, 26, 16) | FLD_VAL(x, 10, 0); | ||
756 | dispc_write_reg(pos_reg[plane], val); | ||
757 | } | ||
758 | |||
759 | static void _dispc_set_pic_size(enum omap_plane plane, int width, int height) | ||
760 | { | ||
761 | const struct dispc_reg siz_reg[] = { DISPC_GFX_SIZE, | ||
762 | DISPC_VID_PICTURE_SIZE(0), | ||
763 | DISPC_VID_PICTURE_SIZE(1) }; | ||
764 | u32 val = FLD_VAL(height - 1, 26, 16) | FLD_VAL(width - 1, 10, 0); | ||
765 | dispc_write_reg(siz_reg[plane], val); | ||
766 | } | ||
767 | |||
768 | static void _dispc_set_vid_size(enum omap_plane plane, int width, int height) | ||
769 | { | ||
770 | u32 val; | ||
771 | const struct dispc_reg vsi_reg[] = { DISPC_VID_SIZE(0), | ||
772 | DISPC_VID_SIZE(1) }; | ||
773 | |||
774 | BUG_ON(plane == OMAP_DSS_GFX); | ||
775 | |||
776 | val = FLD_VAL(height - 1, 26, 16) | FLD_VAL(width - 1, 10, 0); | ||
777 | dispc_write_reg(vsi_reg[plane-1], val); | ||
778 | } | ||
779 | |||
780 | static void _dispc_setup_global_alpha(enum omap_plane plane, u8 global_alpha) | ||
781 | { | ||
782 | |||
783 | BUG_ON(plane == OMAP_DSS_VIDEO1); | ||
784 | |||
785 | if (cpu_is_omap24xx()) | ||
786 | return; | ||
787 | |||
788 | if (plane == OMAP_DSS_GFX) | ||
789 | REG_FLD_MOD(DISPC_GLOBAL_ALPHA, global_alpha, 7, 0); | ||
790 | else if (plane == OMAP_DSS_VIDEO2) | ||
791 | REG_FLD_MOD(DISPC_GLOBAL_ALPHA, global_alpha, 23, 16); | ||
792 | } | ||
793 | |||
794 | static void _dispc_set_pix_inc(enum omap_plane plane, s32 inc) | ||
795 | { | ||
796 | const struct dispc_reg ri_reg[] = { DISPC_GFX_PIXEL_INC, | ||
797 | DISPC_VID_PIXEL_INC(0), | ||
798 | DISPC_VID_PIXEL_INC(1) }; | ||
799 | |||
800 | dispc_write_reg(ri_reg[plane], inc); | ||
801 | } | ||
802 | |||
803 | static void _dispc_set_row_inc(enum omap_plane plane, s32 inc) | ||
804 | { | ||
805 | const struct dispc_reg ri_reg[] = { DISPC_GFX_ROW_INC, | ||
806 | DISPC_VID_ROW_INC(0), | ||
807 | DISPC_VID_ROW_INC(1) }; | ||
808 | |||
809 | dispc_write_reg(ri_reg[plane], inc); | ||
810 | } | ||
811 | |||
812 | static void _dispc_set_color_mode(enum omap_plane plane, | ||
813 | enum omap_color_mode color_mode) | ||
814 | { | ||
815 | u32 m = 0; | ||
816 | |||
817 | switch (color_mode) { | ||
818 | case OMAP_DSS_COLOR_CLUT1: | ||
819 | m = 0x0; break; | ||
820 | case OMAP_DSS_COLOR_CLUT2: | ||
821 | m = 0x1; break; | ||
822 | case OMAP_DSS_COLOR_CLUT4: | ||
823 | m = 0x2; break; | ||
824 | case OMAP_DSS_COLOR_CLUT8: | ||
825 | m = 0x3; break; | ||
826 | case OMAP_DSS_COLOR_RGB12U: | ||
827 | m = 0x4; break; | ||
828 | case OMAP_DSS_COLOR_ARGB16: | ||
829 | m = 0x5; break; | ||
830 | case OMAP_DSS_COLOR_RGB16: | ||
831 | m = 0x6; break; | ||
832 | case OMAP_DSS_COLOR_RGB24U: | ||
833 | m = 0x8; break; | ||
834 | case OMAP_DSS_COLOR_RGB24P: | ||
835 | m = 0x9; break; | ||
836 | case OMAP_DSS_COLOR_YUV2: | ||
837 | m = 0xa; break; | ||
838 | case OMAP_DSS_COLOR_UYVY: | ||
839 | m = 0xb; break; | ||
840 | case OMAP_DSS_COLOR_ARGB32: | ||
841 | m = 0xc; break; | ||
842 | case OMAP_DSS_COLOR_RGBA32: | ||
843 | m = 0xd; break; | ||
844 | case OMAP_DSS_COLOR_RGBX32: | ||
845 | m = 0xe; break; | ||
846 | default: | ||
847 | BUG(); break; | ||
848 | } | ||
849 | |||
850 | REG_FLD_MOD(dispc_reg_att[plane], m, 4, 1); | ||
851 | } | ||
852 | |||
853 | static void _dispc_set_channel_out(enum omap_plane plane, | ||
854 | enum omap_channel channel) | ||
855 | { | ||
856 | int shift; | ||
857 | u32 val; | ||
858 | |||
859 | switch (plane) { | ||
860 | case OMAP_DSS_GFX: | ||
861 | shift = 8; | ||
862 | break; | ||
863 | case OMAP_DSS_VIDEO1: | ||
864 | case OMAP_DSS_VIDEO2: | ||
865 | shift = 16; | ||
866 | break; | ||
867 | default: | ||
868 | BUG(); | ||
869 | return; | ||
870 | } | ||
871 | |||
872 | val = dispc_read_reg(dispc_reg_att[plane]); | ||
873 | val = FLD_MOD(val, channel, shift, shift); | ||
874 | dispc_write_reg(dispc_reg_att[plane], val); | ||
875 | } | ||
876 | |||
877 | void dispc_set_burst_size(enum omap_plane plane, | ||
878 | enum omap_burst_size burst_size) | ||
879 | { | ||
880 | int shift; | ||
881 | u32 val; | ||
882 | |||
883 | enable_clocks(1); | ||
884 | |||
885 | switch (plane) { | ||
886 | case OMAP_DSS_GFX: | ||
887 | shift = 6; | ||
888 | break; | ||
889 | case OMAP_DSS_VIDEO1: | ||
890 | case OMAP_DSS_VIDEO2: | ||
891 | shift = 14; | ||
892 | break; | ||
893 | default: | ||
894 | BUG(); | ||
895 | return; | ||
896 | } | ||
897 | |||
898 | val = dispc_read_reg(dispc_reg_att[plane]); | ||
899 | val = FLD_MOD(val, burst_size, shift+1, shift); | ||
900 | dispc_write_reg(dispc_reg_att[plane], val); | ||
901 | |||
902 | enable_clocks(0); | ||
903 | } | ||
904 | |||
905 | static void _dispc_set_vid_color_conv(enum omap_plane plane, bool enable) | ||
906 | { | ||
907 | u32 val; | ||
908 | |||
909 | BUG_ON(plane == OMAP_DSS_GFX); | ||
910 | |||
911 | val = dispc_read_reg(dispc_reg_att[plane]); | ||
912 | val = FLD_MOD(val, enable, 9, 9); | ||
913 | dispc_write_reg(dispc_reg_att[plane], val); | ||
914 | } | ||
915 | |||
916 | void dispc_enable_replication(enum omap_plane plane, bool enable) | ||
917 | { | ||
918 | int bit; | ||
919 | |||
920 | if (plane == OMAP_DSS_GFX) | ||
921 | bit = 5; | ||
922 | else | ||
923 | bit = 10; | ||
924 | |||
925 | enable_clocks(1); | ||
926 | REG_FLD_MOD(dispc_reg_att[plane], enable, bit, bit); | ||
927 | enable_clocks(0); | ||
928 | } | ||
929 | |||
930 | void dispc_set_lcd_size(u16 width, u16 height) | ||
931 | { | ||
932 | u32 val; | ||
933 | BUG_ON((width > (1 << 11)) || (height > (1 << 11))); | ||
934 | val = FLD_VAL(height - 1, 26, 16) | FLD_VAL(width - 1, 10, 0); | ||
935 | enable_clocks(1); | ||
936 | dispc_write_reg(DISPC_SIZE_LCD, val); | ||
937 | enable_clocks(0); | ||
938 | } | ||
939 | |||
940 | void dispc_set_digit_size(u16 width, u16 height) | ||
941 | { | ||
942 | u32 val; | ||
943 | BUG_ON((width > (1 << 11)) || (height > (1 << 11))); | ||
944 | val = FLD_VAL(height - 1, 26, 16) | FLD_VAL(width - 1, 10, 0); | ||
945 | enable_clocks(1); | ||
946 | dispc_write_reg(DISPC_SIZE_DIG, val); | ||
947 | enable_clocks(0); | ||
948 | } | ||
949 | |||
950 | static void dispc_read_plane_fifo_sizes(void) | ||
951 | { | ||
952 | const struct dispc_reg fsz_reg[] = { DISPC_GFX_FIFO_SIZE_STATUS, | ||
953 | DISPC_VID_FIFO_SIZE_STATUS(0), | ||
954 | DISPC_VID_FIFO_SIZE_STATUS(1) }; | ||
955 | u32 size; | ||
956 | int plane; | ||
957 | |||
958 | enable_clocks(1); | ||
959 | |||
960 | for (plane = 0; plane < ARRAY_SIZE(dispc.fifo_size); ++plane) { | ||
961 | if (cpu_is_omap24xx()) | ||
962 | size = FLD_GET(dispc_read_reg(fsz_reg[plane]), 8, 0); | ||
963 | else if (cpu_is_omap34xx()) | ||
964 | size = FLD_GET(dispc_read_reg(fsz_reg[plane]), 10, 0); | ||
965 | else | ||
966 | BUG(); | ||
967 | |||
968 | dispc.fifo_size[plane] = size; | ||
969 | } | ||
970 | |||
971 | enable_clocks(0); | ||
972 | } | ||
973 | |||
974 | u32 dispc_get_plane_fifo_size(enum omap_plane plane) | ||
975 | { | ||
976 | return dispc.fifo_size[plane]; | ||
977 | } | ||
978 | |||
979 | void dispc_setup_plane_fifo(enum omap_plane plane, u32 low, u32 high) | ||
980 | { | ||
981 | const struct dispc_reg ftrs_reg[] = { DISPC_GFX_FIFO_THRESHOLD, | ||
982 | DISPC_VID_FIFO_THRESHOLD(0), | ||
983 | DISPC_VID_FIFO_THRESHOLD(1) }; | ||
984 | enable_clocks(1); | ||
985 | |||
986 | DSSDBG("fifo(%d) low/high old %u/%u, new %u/%u\n", | ||
987 | plane, | ||
988 | REG_GET(ftrs_reg[plane], 11, 0), | ||
989 | REG_GET(ftrs_reg[plane], 27, 16), | ||
990 | low, high); | ||
991 | |||
992 | if (cpu_is_omap24xx()) | ||
993 | dispc_write_reg(ftrs_reg[plane], | ||
994 | FLD_VAL(high, 24, 16) | FLD_VAL(low, 8, 0)); | ||
995 | else | ||
996 | dispc_write_reg(ftrs_reg[plane], | ||
997 | FLD_VAL(high, 27, 16) | FLD_VAL(low, 11, 0)); | ||
998 | |||
999 | enable_clocks(0); | ||
1000 | } | ||
1001 | |||
1002 | void dispc_enable_fifomerge(bool enable) | ||
1003 | { | ||
1004 | enable_clocks(1); | ||
1005 | |||
1006 | DSSDBG("FIFO merge %s\n", enable ? "enabled" : "disabled"); | ||
1007 | REG_FLD_MOD(DISPC_CONFIG, enable ? 1 : 0, 14, 14); | ||
1008 | |||
1009 | enable_clocks(0); | ||
1010 | } | ||
1011 | |||
1012 | static void _dispc_set_fir(enum omap_plane plane, int hinc, int vinc) | ||
1013 | { | ||
1014 | u32 val; | ||
1015 | const struct dispc_reg fir_reg[] = { DISPC_VID_FIR(0), | ||
1016 | DISPC_VID_FIR(1) }; | ||
1017 | |||
1018 | BUG_ON(plane == OMAP_DSS_GFX); | ||
1019 | |||
1020 | if (cpu_is_omap24xx()) | ||
1021 | val = FLD_VAL(vinc, 27, 16) | FLD_VAL(hinc, 11, 0); | ||
1022 | else | ||
1023 | val = FLD_VAL(vinc, 28, 16) | FLD_VAL(hinc, 12, 0); | ||
1024 | dispc_write_reg(fir_reg[plane-1], val); | ||
1025 | } | ||
1026 | |||
1027 | static void _dispc_set_vid_accu0(enum omap_plane plane, int haccu, int vaccu) | ||
1028 | { | ||
1029 | u32 val; | ||
1030 | const struct dispc_reg ac0_reg[] = { DISPC_VID_ACCU0(0), | ||
1031 | DISPC_VID_ACCU0(1) }; | ||
1032 | |||
1033 | BUG_ON(plane == OMAP_DSS_GFX); | ||
1034 | |||
1035 | val = FLD_VAL(vaccu, 25, 16) | FLD_VAL(haccu, 9, 0); | ||
1036 | dispc_write_reg(ac0_reg[plane-1], val); | ||
1037 | } | ||
1038 | |||
1039 | static void _dispc_set_vid_accu1(enum omap_plane plane, int haccu, int vaccu) | ||
1040 | { | ||
1041 | u32 val; | ||
1042 | const struct dispc_reg ac1_reg[] = { DISPC_VID_ACCU1(0), | ||
1043 | DISPC_VID_ACCU1(1) }; | ||
1044 | |||
1045 | BUG_ON(plane == OMAP_DSS_GFX); | ||
1046 | |||
1047 | val = FLD_VAL(vaccu, 25, 16) | FLD_VAL(haccu, 9, 0); | ||
1048 | dispc_write_reg(ac1_reg[plane-1], val); | ||
1049 | } | ||
1050 | |||
1051 | |||
1052 | static void _dispc_set_scaling(enum omap_plane plane, | ||
1053 | u16 orig_width, u16 orig_height, | ||
1054 | u16 out_width, u16 out_height, | ||
1055 | bool ilace, bool five_taps, | ||
1056 | bool fieldmode) | ||
1057 | { | ||
1058 | int fir_hinc; | ||
1059 | int fir_vinc; | ||
1060 | int hscaleup, vscaleup; | ||
1061 | int accu0 = 0; | ||
1062 | int accu1 = 0; | ||
1063 | u32 l; | ||
1064 | |||
1065 | BUG_ON(plane == OMAP_DSS_GFX); | ||
1066 | |||
1067 | hscaleup = orig_width <= out_width; | ||
1068 | vscaleup = orig_height <= out_height; | ||
1069 | |||
1070 | _dispc_set_scale_coef(plane, hscaleup, vscaleup, five_taps); | ||
1071 | |||
1072 | if (!orig_width || orig_width == out_width) | ||
1073 | fir_hinc = 0; | ||
1074 | else | ||
1075 | fir_hinc = 1024 * orig_width / out_width; | ||
1076 | |||
1077 | if (!orig_height || orig_height == out_height) | ||
1078 | fir_vinc = 0; | ||
1079 | else | ||
1080 | fir_vinc = 1024 * orig_height / out_height; | ||
1081 | |||
1082 | _dispc_set_fir(plane, fir_hinc, fir_vinc); | ||
1083 | |||
1084 | l = dispc_read_reg(dispc_reg_att[plane]); | ||
1085 | l &= ~((0x0f << 5) | (0x3 << 21)); | ||
1086 | |||
1087 | l |= fir_hinc ? (1 << 5) : 0; | ||
1088 | l |= fir_vinc ? (1 << 6) : 0; | ||
1089 | |||
1090 | l |= hscaleup ? 0 : (1 << 7); | ||
1091 | l |= vscaleup ? 0 : (1 << 8); | ||
1092 | |||
1093 | l |= five_taps ? (1 << 21) : 0; | ||
1094 | l |= five_taps ? (1 << 22) : 0; | ||
1095 | |||
1096 | dispc_write_reg(dispc_reg_att[plane], l); | ||
1097 | |||
1098 | /* | ||
1099 | * field 0 = even field = bottom field | ||
1100 | * field 1 = odd field = top field | ||
1101 | */ | ||
1102 | if (ilace && !fieldmode) { | ||
1103 | accu1 = 0; | ||
1104 | accu0 = (fir_vinc / 2) & 0x3ff; | ||
1105 | if (accu0 >= 1024/2) { | ||
1106 | accu1 = 1024/2; | ||
1107 | accu0 -= accu1; | ||
1108 | } | ||
1109 | } | ||
1110 | |||
1111 | _dispc_set_vid_accu0(plane, 0, accu0); | ||
1112 | _dispc_set_vid_accu1(plane, 0, accu1); | ||
1113 | } | ||
1114 | |||
1115 | static void _dispc_set_rotation_attrs(enum omap_plane plane, u8 rotation, | ||
1116 | bool mirroring, enum omap_color_mode color_mode) | ||
1117 | { | ||
1118 | if (color_mode == OMAP_DSS_COLOR_YUV2 || | ||
1119 | color_mode == OMAP_DSS_COLOR_UYVY) { | ||
1120 | int vidrot = 0; | ||
1121 | |||
1122 | if (mirroring) { | ||
1123 | switch (rotation) { | ||
1124 | case OMAP_DSS_ROT_0: | ||
1125 | vidrot = 2; | ||
1126 | break; | ||
1127 | case OMAP_DSS_ROT_90: | ||
1128 | vidrot = 1; | ||
1129 | break; | ||
1130 | case OMAP_DSS_ROT_180: | ||
1131 | vidrot = 0; | ||
1132 | break; | ||
1133 | case OMAP_DSS_ROT_270: | ||
1134 | vidrot = 3; | ||
1135 | break; | ||
1136 | } | ||
1137 | } else { | ||
1138 | switch (rotation) { | ||
1139 | case OMAP_DSS_ROT_0: | ||
1140 | vidrot = 0; | ||
1141 | break; | ||
1142 | case OMAP_DSS_ROT_90: | ||
1143 | vidrot = 1; | ||
1144 | break; | ||
1145 | case OMAP_DSS_ROT_180: | ||
1146 | vidrot = 2; | ||
1147 | break; | ||
1148 | case OMAP_DSS_ROT_270: | ||
1149 | vidrot = 3; | ||
1150 | break; | ||
1151 | } | ||
1152 | } | ||
1153 | |||
1154 | REG_FLD_MOD(dispc_reg_att[plane], vidrot, 13, 12); | ||
1155 | |||
1156 | if (rotation == OMAP_DSS_ROT_90 || rotation == OMAP_DSS_ROT_270) | ||
1157 | REG_FLD_MOD(dispc_reg_att[plane], 0x1, 18, 18); | ||
1158 | else | ||
1159 | REG_FLD_MOD(dispc_reg_att[plane], 0x0, 18, 18); | ||
1160 | } else { | ||
1161 | REG_FLD_MOD(dispc_reg_att[plane], 0, 13, 12); | ||
1162 | REG_FLD_MOD(dispc_reg_att[plane], 0, 18, 18); | ||
1163 | } | ||
1164 | } | ||
1165 | |||
1166 | static int color_mode_to_bpp(enum omap_color_mode color_mode) | ||
1167 | { | ||
1168 | switch (color_mode) { | ||
1169 | case OMAP_DSS_COLOR_CLUT1: | ||
1170 | return 1; | ||
1171 | case OMAP_DSS_COLOR_CLUT2: | ||
1172 | return 2; | ||
1173 | case OMAP_DSS_COLOR_CLUT4: | ||
1174 | return 4; | ||
1175 | case OMAP_DSS_COLOR_CLUT8: | ||
1176 | return 8; | ||
1177 | case OMAP_DSS_COLOR_RGB12U: | ||
1178 | case OMAP_DSS_COLOR_RGB16: | ||
1179 | case OMAP_DSS_COLOR_ARGB16: | ||
1180 | case OMAP_DSS_COLOR_YUV2: | ||
1181 | case OMAP_DSS_COLOR_UYVY: | ||
1182 | return 16; | ||
1183 | case OMAP_DSS_COLOR_RGB24P: | ||
1184 | return 24; | ||
1185 | case OMAP_DSS_COLOR_RGB24U: | ||
1186 | case OMAP_DSS_COLOR_ARGB32: | ||
1187 | case OMAP_DSS_COLOR_RGBA32: | ||
1188 | case OMAP_DSS_COLOR_RGBX32: | ||
1189 | return 32; | ||
1190 | default: | ||
1191 | BUG(); | ||
1192 | } | ||
1193 | } | ||
1194 | |||
1195 | static s32 pixinc(int pixels, u8 ps) | ||
1196 | { | ||
1197 | if (pixels == 1) | ||
1198 | return 1; | ||
1199 | else if (pixels > 1) | ||
1200 | return 1 + (pixels - 1) * ps; | ||
1201 | else if (pixels < 0) | ||
1202 | return 1 - (-pixels + 1) * ps; | ||
1203 | else | ||
1204 | BUG(); | ||
1205 | } | ||
1206 | |||
1207 | static void calc_vrfb_rotation_offset(u8 rotation, bool mirror, | ||
1208 | u16 screen_width, | ||
1209 | u16 width, u16 height, | ||
1210 | enum omap_color_mode color_mode, bool fieldmode, | ||
1211 | unsigned int field_offset, | ||
1212 | unsigned *offset0, unsigned *offset1, | ||
1213 | s32 *row_inc, s32 *pix_inc) | ||
1214 | { | ||
1215 | u8 ps; | ||
1216 | |||
1217 | /* FIXME CLUT formats */ | ||
1218 | switch (color_mode) { | ||
1219 | case OMAP_DSS_COLOR_CLUT1: | ||
1220 | case OMAP_DSS_COLOR_CLUT2: | ||
1221 | case OMAP_DSS_COLOR_CLUT4: | ||
1222 | case OMAP_DSS_COLOR_CLUT8: | ||
1223 | BUG(); | ||
1224 | return; | ||
1225 | case OMAP_DSS_COLOR_YUV2: | ||
1226 | case OMAP_DSS_COLOR_UYVY: | ||
1227 | ps = 4; | ||
1228 | break; | ||
1229 | default: | ||
1230 | ps = color_mode_to_bpp(color_mode) / 8; | ||
1231 | break; | ||
1232 | } | ||
1233 | |||
1234 | DSSDBG("calc_rot(%d): scrw %d, %dx%d\n", rotation, screen_width, | ||
1235 | width, height); | ||
1236 | |||
1237 | /* | ||
1238 | * field 0 = even field = bottom field | ||
1239 | * field 1 = odd field = top field | ||
1240 | */ | ||
1241 | switch (rotation + mirror * 4) { | ||
1242 | case OMAP_DSS_ROT_0: | ||
1243 | case OMAP_DSS_ROT_180: | ||
1244 | /* | ||
1245 | * If the pixel format is YUV or UYVY divide the width | ||
1246 | * of the image by 2 for 0 and 180 degree rotation. | ||
1247 | */ | ||
1248 | if (color_mode == OMAP_DSS_COLOR_YUV2 || | ||
1249 | color_mode == OMAP_DSS_COLOR_UYVY) | ||
1250 | width = width >> 1; | ||
1251 | case OMAP_DSS_ROT_90: | ||
1252 | case OMAP_DSS_ROT_270: | ||
1253 | *offset1 = 0; | ||
1254 | if (field_offset) | ||
1255 | *offset0 = field_offset * screen_width * ps; | ||
1256 | else | ||
1257 | *offset0 = 0; | ||
1258 | |||
1259 | *row_inc = pixinc(1 + (screen_width - width) + | ||
1260 | (fieldmode ? screen_width : 0), | ||
1261 | ps); | ||
1262 | *pix_inc = pixinc(1, ps); | ||
1263 | break; | ||
1264 | |||
1265 | case OMAP_DSS_ROT_0 + 4: | ||
1266 | case OMAP_DSS_ROT_180 + 4: | ||
1267 | /* If the pixel format is YUV or UYVY divide the width | ||
1268 | * of the image by 2 for 0 degree and 180 degree | ||
1269 | */ | ||
1270 | if (color_mode == OMAP_DSS_COLOR_YUV2 || | ||
1271 | color_mode == OMAP_DSS_COLOR_UYVY) | ||
1272 | width = width >> 1; | ||
1273 | case OMAP_DSS_ROT_90 + 4: | ||
1274 | case OMAP_DSS_ROT_270 + 4: | ||
1275 | *offset1 = 0; | ||
1276 | if (field_offset) | ||
1277 | *offset0 = field_offset * screen_width * ps; | ||
1278 | else | ||
1279 | *offset0 = 0; | ||
1280 | *row_inc = pixinc(1 - (screen_width + width) - | ||
1281 | (fieldmode ? screen_width : 0), | ||
1282 | ps); | ||
1283 | *pix_inc = pixinc(1, ps); | ||
1284 | break; | ||
1285 | |||
1286 | default: | ||
1287 | BUG(); | ||
1288 | } | ||
1289 | } | ||
1290 | |||
1291 | static void calc_dma_rotation_offset(u8 rotation, bool mirror, | ||
1292 | u16 screen_width, | ||
1293 | u16 width, u16 height, | ||
1294 | enum omap_color_mode color_mode, bool fieldmode, | ||
1295 | unsigned int field_offset, | ||
1296 | unsigned *offset0, unsigned *offset1, | ||
1297 | s32 *row_inc, s32 *pix_inc) | ||
1298 | { | ||
1299 | u8 ps; | ||
1300 | u16 fbw, fbh; | ||
1301 | |||
1302 | /* FIXME CLUT formats */ | ||
1303 | switch (color_mode) { | ||
1304 | case OMAP_DSS_COLOR_CLUT1: | ||
1305 | case OMAP_DSS_COLOR_CLUT2: | ||
1306 | case OMAP_DSS_COLOR_CLUT4: | ||
1307 | case OMAP_DSS_COLOR_CLUT8: | ||
1308 | BUG(); | ||
1309 | return; | ||
1310 | default: | ||
1311 | ps = color_mode_to_bpp(color_mode) / 8; | ||
1312 | break; | ||
1313 | } | ||
1314 | |||
1315 | DSSDBG("calc_rot(%d): scrw %d, %dx%d\n", rotation, screen_width, | ||
1316 | width, height); | ||
1317 | |||
1318 | /* width & height are overlay sizes, convert to fb sizes */ | ||
1319 | |||
1320 | if (rotation == OMAP_DSS_ROT_0 || rotation == OMAP_DSS_ROT_180) { | ||
1321 | fbw = width; | ||
1322 | fbh = height; | ||
1323 | } else { | ||
1324 | fbw = height; | ||
1325 | fbh = width; | ||
1326 | } | ||
1327 | |||
1328 | /* | ||
1329 | * field 0 = even field = bottom field | ||
1330 | * field 1 = odd field = top field | ||
1331 | */ | ||
1332 | switch (rotation + mirror * 4) { | ||
1333 | case OMAP_DSS_ROT_0: | ||
1334 | *offset1 = 0; | ||
1335 | if (field_offset) | ||
1336 | *offset0 = *offset1 + field_offset * screen_width * ps; | ||
1337 | else | ||
1338 | *offset0 = *offset1; | ||
1339 | *row_inc = pixinc(1 + (screen_width - fbw) + | ||
1340 | (fieldmode ? screen_width : 0), | ||
1341 | ps); | ||
1342 | *pix_inc = pixinc(1, ps); | ||
1343 | break; | ||
1344 | case OMAP_DSS_ROT_90: | ||
1345 | *offset1 = screen_width * (fbh - 1) * ps; | ||
1346 | if (field_offset) | ||
1347 | *offset0 = *offset1 + field_offset * ps; | ||
1348 | else | ||
1349 | *offset0 = *offset1; | ||
1350 | *row_inc = pixinc(screen_width * (fbh - 1) + 1 + | ||
1351 | (fieldmode ? 1 : 0), ps); | ||
1352 | *pix_inc = pixinc(-screen_width, ps); | ||
1353 | break; | ||
1354 | case OMAP_DSS_ROT_180: | ||
1355 | *offset1 = (screen_width * (fbh - 1) + fbw - 1) * ps; | ||
1356 | if (field_offset) | ||
1357 | *offset0 = *offset1 - field_offset * screen_width * ps; | ||
1358 | else | ||
1359 | *offset0 = *offset1; | ||
1360 | *row_inc = pixinc(-1 - | ||
1361 | (screen_width - fbw) - | ||
1362 | (fieldmode ? screen_width : 0), | ||
1363 | ps); | ||
1364 | *pix_inc = pixinc(-1, ps); | ||
1365 | break; | ||
1366 | case OMAP_DSS_ROT_270: | ||
1367 | *offset1 = (fbw - 1) * ps; | ||
1368 | if (field_offset) | ||
1369 | *offset0 = *offset1 - field_offset * ps; | ||
1370 | else | ||
1371 | *offset0 = *offset1; | ||
1372 | *row_inc = pixinc(-screen_width * (fbh - 1) - 1 - | ||
1373 | (fieldmode ? 1 : 0), ps); | ||
1374 | *pix_inc = pixinc(screen_width, ps); | ||
1375 | break; | ||
1376 | |||
1377 | /* mirroring */ | ||
1378 | case OMAP_DSS_ROT_0 + 4: | ||
1379 | *offset1 = (fbw - 1) * ps; | ||
1380 | if (field_offset) | ||
1381 | *offset0 = *offset1 + field_offset * screen_width * ps; | ||
1382 | else | ||
1383 | *offset0 = *offset1; | ||
1384 | *row_inc = pixinc(screen_width * 2 - 1 + | ||
1385 | (fieldmode ? screen_width : 0), | ||
1386 | ps); | ||
1387 | *pix_inc = pixinc(-1, ps); | ||
1388 | break; | ||
1389 | |||
1390 | case OMAP_DSS_ROT_90 + 4: | ||
1391 | *offset1 = 0; | ||
1392 | if (field_offset) | ||
1393 | *offset0 = *offset1 + field_offset * ps; | ||
1394 | else | ||
1395 | *offset0 = *offset1; | ||
1396 | *row_inc = pixinc(-screen_width * (fbh - 1) + 1 + | ||
1397 | (fieldmode ? 1 : 0), | ||
1398 | ps); | ||
1399 | *pix_inc = pixinc(screen_width, ps); | ||
1400 | break; | ||
1401 | |||
1402 | case OMAP_DSS_ROT_180 + 4: | ||
1403 | *offset1 = screen_width * (fbh - 1) * ps; | ||
1404 | if (field_offset) | ||
1405 | *offset0 = *offset1 - field_offset * screen_width * ps; | ||
1406 | else | ||
1407 | *offset0 = *offset1; | ||
1408 | *row_inc = pixinc(1 - screen_width * 2 - | ||
1409 | (fieldmode ? screen_width : 0), | ||
1410 | ps); | ||
1411 | *pix_inc = pixinc(1, ps); | ||
1412 | break; | ||
1413 | |||
1414 | case OMAP_DSS_ROT_270 + 4: | ||
1415 | *offset1 = (screen_width * (fbh - 1) + fbw - 1) * ps; | ||
1416 | if (field_offset) | ||
1417 | *offset0 = *offset1 - field_offset * ps; | ||
1418 | else | ||
1419 | *offset0 = *offset1; | ||
1420 | *row_inc = pixinc(screen_width * (fbh - 1) - 1 - | ||
1421 | (fieldmode ? 1 : 0), | ||
1422 | ps); | ||
1423 | *pix_inc = pixinc(-screen_width, ps); | ||
1424 | break; | ||
1425 | |||
1426 | default: | ||
1427 | BUG(); | ||
1428 | } | ||
1429 | } | ||
1430 | |||
1431 | static unsigned long calc_fclk_five_taps(u16 width, u16 height, | ||
1432 | u16 out_width, u16 out_height, enum omap_color_mode color_mode) | ||
1433 | { | ||
1434 | u32 fclk = 0; | ||
1435 | /* FIXME venc pclk? */ | ||
1436 | u64 tmp, pclk = dispc_pclk_rate(); | ||
1437 | |||
1438 | if (height > out_height) { | ||
1439 | /* FIXME get real display PPL */ | ||
1440 | unsigned int ppl = 800; | ||
1441 | |||
1442 | tmp = pclk * height * out_width; | ||
1443 | do_div(tmp, 2 * out_height * ppl); | ||
1444 | fclk = tmp; | ||
1445 | |||
1446 | if (height > 2 * out_height && ppl != out_width) { | ||
1447 | tmp = pclk * (height - 2 * out_height) * out_width; | ||
1448 | do_div(tmp, 2 * out_height * (ppl - out_width)); | ||
1449 | fclk = max(fclk, (u32) tmp); | ||
1450 | } | ||
1451 | } | ||
1452 | |||
1453 | if (width > out_width) { | ||
1454 | tmp = pclk * width; | ||
1455 | do_div(tmp, out_width); | ||
1456 | fclk = max(fclk, (u32) tmp); | ||
1457 | |||
1458 | if (color_mode == OMAP_DSS_COLOR_RGB24U) | ||
1459 | fclk <<= 1; | ||
1460 | } | ||
1461 | |||
1462 | return fclk; | ||
1463 | } | ||
1464 | |||
1465 | static unsigned long calc_fclk(u16 width, u16 height, | ||
1466 | u16 out_width, u16 out_height) | ||
1467 | { | ||
1468 | unsigned int hf, vf; | ||
1469 | |||
1470 | /* | ||
1471 | * FIXME how to determine the 'A' factor | ||
1472 | * for the no downscaling case ? | ||
1473 | */ | ||
1474 | |||
1475 | if (width > 3 * out_width) | ||
1476 | hf = 4; | ||
1477 | else if (width > 2 * out_width) | ||
1478 | hf = 3; | ||
1479 | else if (width > out_width) | ||
1480 | hf = 2; | ||
1481 | else | ||
1482 | hf = 1; | ||
1483 | |||
1484 | if (height > out_height) | ||
1485 | vf = 2; | ||
1486 | else | ||
1487 | vf = 1; | ||
1488 | |||
1489 | /* FIXME venc pclk? */ | ||
1490 | return dispc_pclk_rate() * vf * hf; | ||
1491 | } | ||
1492 | |||
1493 | void dispc_set_channel_out(enum omap_plane plane, enum omap_channel channel_out) | ||
1494 | { | ||
1495 | enable_clocks(1); | ||
1496 | _dispc_set_channel_out(plane, channel_out); | ||
1497 | enable_clocks(0); | ||
1498 | } | ||
1499 | |||
1500 | static int _dispc_setup_plane(enum omap_plane plane, | ||
1501 | u32 paddr, u16 screen_width, | ||
1502 | u16 pos_x, u16 pos_y, | ||
1503 | u16 width, u16 height, | ||
1504 | u16 out_width, u16 out_height, | ||
1505 | enum omap_color_mode color_mode, | ||
1506 | bool ilace, | ||
1507 | enum omap_dss_rotation_type rotation_type, | ||
1508 | u8 rotation, int mirror, | ||
1509 | u8 global_alpha) | ||
1510 | { | ||
1511 | const int maxdownscale = cpu_is_omap34xx() ? 4 : 2; | ||
1512 | bool five_taps = 0; | ||
1513 | bool fieldmode = 0; | ||
1514 | int cconv = 0; | ||
1515 | unsigned offset0, offset1; | ||
1516 | s32 row_inc; | ||
1517 | s32 pix_inc; | ||
1518 | u16 frame_height = height; | ||
1519 | unsigned int field_offset = 0; | ||
1520 | |||
1521 | if (paddr == 0) | ||
1522 | return -EINVAL; | ||
1523 | |||
1524 | if (ilace && height == out_height) | ||
1525 | fieldmode = 1; | ||
1526 | |||
1527 | if (ilace) { | ||
1528 | if (fieldmode) | ||
1529 | height /= 2; | ||
1530 | pos_y /= 2; | ||
1531 | out_height /= 2; | ||
1532 | |||
1533 | DSSDBG("adjusting for ilace: height %d, pos_y %d, " | ||
1534 | "out_height %d\n", | ||
1535 | height, pos_y, out_height); | ||
1536 | } | ||
1537 | |||
1538 | if (plane == OMAP_DSS_GFX) { | ||
1539 | if (width != out_width || height != out_height) | ||
1540 | return -EINVAL; | ||
1541 | |||
1542 | switch (color_mode) { | ||
1543 | case OMAP_DSS_COLOR_ARGB16: | ||
1544 | case OMAP_DSS_COLOR_ARGB32: | ||
1545 | case OMAP_DSS_COLOR_RGBA32: | ||
1546 | case OMAP_DSS_COLOR_RGBX32: | ||
1547 | if (cpu_is_omap24xx()) | ||
1548 | return -EINVAL; | ||
1549 | /* fall through */ | ||
1550 | case OMAP_DSS_COLOR_RGB12U: | ||
1551 | case OMAP_DSS_COLOR_RGB16: | ||
1552 | case OMAP_DSS_COLOR_RGB24P: | ||
1553 | case OMAP_DSS_COLOR_RGB24U: | ||
1554 | break; | ||
1555 | |||
1556 | default: | ||
1557 | return -EINVAL; | ||
1558 | } | ||
1559 | } else { | ||
1560 | /* video plane */ | ||
1561 | |||
1562 | unsigned long fclk = 0; | ||
1563 | |||
1564 | if (out_width < width / maxdownscale || | ||
1565 | out_width > width * 8) | ||
1566 | return -EINVAL; | ||
1567 | |||
1568 | if (out_height < height / maxdownscale || | ||
1569 | out_height > height * 8) | ||
1570 | return -EINVAL; | ||
1571 | |||
1572 | switch (color_mode) { | ||
1573 | case OMAP_DSS_COLOR_RGBX32: | ||
1574 | case OMAP_DSS_COLOR_RGB12U: | ||
1575 | if (cpu_is_omap24xx()) | ||
1576 | return -EINVAL; | ||
1577 | /* fall through */ | ||
1578 | case OMAP_DSS_COLOR_RGB16: | ||
1579 | case OMAP_DSS_COLOR_RGB24P: | ||
1580 | case OMAP_DSS_COLOR_RGB24U: | ||
1581 | break; | ||
1582 | |||
1583 | case OMAP_DSS_COLOR_ARGB16: | ||
1584 | case OMAP_DSS_COLOR_ARGB32: | ||
1585 | case OMAP_DSS_COLOR_RGBA32: | ||
1586 | if (cpu_is_omap24xx()) | ||
1587 | return -EINVAL; | ||
1588 | if (plane == OMAP_DSS_VIDEO1) | ||
1589 | return -EINVAL; | ||
1590 | break; | ||
1591 | |||
1592 | case OMAP_DSS_COLOR_YUV2: | ||
1593 | case OMAP_DSS_COLOR_UYVY: | ||
1594 | cconv = 1; | ||
1595 | break; | ||
1596 | |||
1597 | default: | ||
1598 | return -EINVAL; | ||
1599 | } | ||
1600 | |||
1601 | /* Must use 5-tap filter? */ | ||
1602 | five_taps = height > out_height * 2; | ||
1603 | |||
1604 | if (!five_taps) { | ||
1605 | fclk = calc_fclk(width, height, | ||
1606 | out_width, out_height); | ||
1607 | |||
1608 | /* Try 5-tap filter if 3-tap fclk is too high */ | ||
1609 | if (cpu_is_omap34xx() && height > out_height && | ||
1610 | fclk > dispc_fclk_rate()) | ||
1611 | five_taps = true; | ||
1612 | } | ||
1613 | |||
1614 | if (width > (2048 >> five_taps)) { | ||
1615 | DSSERR("failed to set up scaling, fclk too low\n"); | ||
1616 | return -EINVAL; | ||
1617 | } | ||
1618 | |||
1619 | if (five_taps) | ||
1620 | fclk = calc_fclk_five_taps(width, height, | ||
1621 | out_width, out_height, color_mode); | ||
1622 | |||
1623 | DSSDBG("required fclk rate = %lu Hz\n", fclk); | ||
1624 | DSSDBG("current fclk rate = %lu Hz\n", dispc_fclk_rate()); | ||
1625 | |||
1626 | if (fclk > dispc_fclk_rate()) { | ||
1627 | DSSERR("failed to set up scaling, " | ||
1628 | "required fclk rate = %lu Hz, " | ||
1629 | "current fclk rate = %lu Hz\n", | ||
1630 | fclk, dispc_fclk_rate()); | ||
1631 | return -EINVAL; | ||
1632 | } | ||
1633 | } | ||
1634 | |||
1635 | if (ilace && !fieldmode) { | ||
1636 | /* | ||
1637 | * when downscaling the bottom field may have to start several | ||
1638 | * source lines below the top field. Unfortunately ACCUI | ||
1639 | * registers will only hold the fractional part of the offset | ||
1640 | * so the integer part must be added to the base address of the | ||
1641 | * bottom field. | ||
1642 | */ | ||
1643 | if (!height || height == out_height) | ||
1644 | field_offset = 0; | ||
1645 | else | ||
1646 | field_offset = height / out_height / 2; | ||
1647 | } | ||
1648 | |||
1649 | /* Fields are independent but interleaved in memory. */ | ||
1650 | if (fieldmode) | ||
1651 | field_offset = 1; | ||
1652 | |||
1653 | if (rotation_type == OMAP_DSS_ROT_DMA) | ||
1654 | calc_dma_rotation_offset(rotation, mirror, | ||
1655 | screen_width, width, frame_height, color_mode, | ||
1656 | fieldmode, field_offset, | ||
1657 | &offset0, &offset1, &row_inc, &pix_inc); | ||
1658 | else | ||
1659 | calc_vrfb_rotation_offset(rotation, mirror, | ||
1660 | screen_width, width, frame_height, color_mode, | ||
1661 | fieldmode, field_offset, | ||
1662 | &offset0, &offset1, &row_inc, &pix_inc); | ||
1663 | |||
1664 | DSSDBG("offset0 %u, offset1 %u, row_inc %d, pix_inc %d\n", | ||
1665 | offset0, offset1, row_inc, pix_inc); | ||
1666 | |||
1667 | _dispc_set_color_mode(plane, color_mode); | ||
1668 | |||
1669 | _dispc_set_plane_ba0(plane, paddr + offset0); | ||
1670 | _dispc_set_plane_ba1(plane, paddr + offset1); | ||
1671 | |||
1672 | _dispc_set_row_inc(plane, row_inc); | ||
1673 | _dispc_set_pix_inc(plane, pix_inc); | ||
1674 | |||
1675 | DSSDBG("%d,%d %dx%d -> %dx%d\n", pos_x, pos_y, width, height, | ||
1676 | out_width, out_height); | ||
1677 | |||
1678 | _dispc_set_plane_pos(plane, pos_x, pos_y); | ||
1679 | |||
1680 | _dispc_set_pic_size(plane, width, height); | ||
1681 | |||
1682 | if (plane != OMAP_DSS_GFX) { | ||
1683 | _dispc_set_scaling(plane, width, height, | ||
1684 | out_width, out_height, | ||
1685 | ilace, five_taps, fieldmode); | ||
1686 | _dispc_set_vid_size(plane, out_width, out_height); | ||
1687 | _dispc_set_vid_color_conv(plane, cconv); | ||
1688 | } | ||
1689 | |||
1690 | _dispc_set_rotation_attrs(plane, rotation, mirror, color_mode); | ||
1691 | |||
1692 | if (plane != OMAP_DSS_VIDEO1) | ||
1693 | _dispc_setup_global_alpha(plane, global_alpha); | ||
1694 | |||
1695 | return 0; | ||
1696 | } | ||
1697 | |||
1698 | static void _dispc_enable_plane(enum omap_plane plane, bool enable) | ||
1699 | { | ||
1700 | REG_FLD_MOD(dispc_reg_att[plane], enable ? 1 : 0, 0, 0); | ||
1701 | } | ||
1702 | |||
1703 | static void dispc_disable_isr(void *data, u32 mask) | ||
1704 | { | ||
1705 | struct completion *compl = data; | ||
1706 | complete(compl); | ||
1707 | } | ||
1708 | |||
1709 | static void _enable_lcd_out(bool enable) | ||
1710 | { | ||
1711 | REG_FLD_MOD(DISPC_CONTROL, enable ? 1 : 0, 0, 0); | ||
1712 | } | ||
1713 | |||
1714 | void dispc_enable_lcd_out(bool enable) | ||
1715 | { | ||
1716 | struct completion frame_done_completion; | ||
1717 | bool is_on; | ||
1718 | int r; | ||
1719 | |||
1720 | enable_clocks(1); | ||
1721 | |||
1722 | /* When we disable LCD output, we need to wait until frame is done. | ||
1723 | * Otherwise the DSS is still working, and turning off the clocks | ||
1724 | * prevents DSS from going to OFF mode */ | ||
1725 | is_on = REG_GET(DISPC_CONTROL, 0, 0); | ||
1726 | |||
1727 | if (!enable && is_on) { | ||
1728 | init_completion(&frame_done_completion); | ||
1729 | |||
1730 | r = omap_dispc_register_isr(dispc_disable_isr, | ||
1731 | &frame_done_completion, | ||
1732 | DISPC_IRQ_FRAMEDONE); | ||
1733 | |||
1734 | if (r) | ||
1735 | DSSERR("failed to register FRAMEDONE isr\n"); | ||
1736 | } | ||
1737 | |||
1738 | _enable_lcd_out(enable); | ||
1739 | |||
1740 | if (!enable && is_on) { | ||
1741 | if (!wait_for_completion_timeout(&frame_done_completion, | ||
1742 | msecs_to_jiffies(100))) | ||
1743 | DSSERR("timeout waiting for FRAME DONE\n"); | ||
1744 | |||
1745 | r = omap_dispc_unregister_isr(dispc_disable_isr, | ||
1746 | &frame_done_completion, | ||
1747 | DISPC_IRQ_FRAMEDONE); | ||
1748 | |||
1749 | if (r) | ||
1750 | DSSERR("failed to unregister FRAMEDONE isr\n"); | ||
1751 | } | ||
1752 | |||
1753 | enable_clocks(0); | ||
1754 | } | ||
1755 | |||
1756 | static void _enable_digit_out(bool enable) | ||
1757 | { | ||
1758 | REG_FLD_MOD(DISPC_CONTROL, enable ? 1 : 0, 1, 1); | ||
1759 | } | ||
1760 | |||
1761 | void dispc_enable_digit_out(bool enable) | ||
1762 | { | ||
1763 | struct completion frame_done_completion; | ||
1764 | int r; | ||
1765 | |||
1766 | enable_clocks(1); | ||
1767 | |||
1768 | if (REG_GET(DISPC_CONTROL, 1, 1) == enable) { | ||
1769 | enable_clocks(0); | ||
1770 | return; | ||
1771 | } | ||
1772 | |||
1773 | if (enable) { | ||
1774 | unsigned long flags; | ||
1775 | /* When we enable digit output, we'll get an extra digit | ||
1776 | * sync lost interrupt, that we need to ignore */ | ||
1777 | spin_lock_irqsave(&dispc.irq_lock, flags); | ||
1778 | dispc.irq_error_mask &= ~DISPC_IRQ_SYNC_LOST_DIGIT; | ||
1779 | _omap_dispc_set_irqs(); | ||
1780 | spin_unlock_irqrestore(&dispc.irq_lock, flags); | ||
1781 | } | ||
1782 | |||
1783 | /* When we disable digit output, we need to wait until fields are done. | ||
1784 | * Otherwise the DSS is still working, and turning off the clocks | ||
1785 | * prevents DSS from going to OFF mode. And when enabling, we need to | ||
1786 | * wait for the extra sync losts */ | ||
1787 | init_completion(&frame_done_completion); | ||
1788 | |||
1789 | r = omap_dispc_register_isr(dispc_disable_isr, &frame_done_completion, | ||
1790 | DISPC_IRQ_EVSYNC_EVEN | DISPC_IRQ_EVSYNC_ODD); | ||
1791 | if (r) | ||
1792 | DSSERR("failed to register EVSYNC isr\n"); | ||
1793 | |||
1794 | _enable_digit_out(enable); | ||
1795 | |||
1796 | /* XXX I understand from TRM that we should only wait for the | ||
1797 | * current field to complete. But it seems we have to wait | ||
1798 | * for both fields */ | ||
1799 | if (!wait_for_completion_timeout(&frame_done_completion, | ||
1800 | msecs_to_jiffies(100))) | ||
1801 | DSSERR("timeout waiting for EVSYNC\n"); | ||
1802 | |||
1803 | if (!wait_for_completion_timeout(&frame_done_completion, | ||
1804 | msecs_to_jiffies(100))) | ||
1805 | DSSERR("timeout waiting for EVSYNC\n"); | ||
1806 | |||
1807 | r = omap_dispc_unregister_isr(dispc_disable_isr, | ||
1808 | &frame_done_completion, | ||
1809 | DISPC_IRQ_EVSYNC_EVEN | DISPC_IRQ_EVSYNC_ODD); | ||
1810 | if (r) | ||
1811 | DSSERR("failed to unregister EVSYNC isr\n"); | ||
1812 | |||
1813 | if (enable) { | ||
1814 | unsigned long flags; | ||
1815 | spin_lock_irqsave(&dispc.irq_lock, flags); | ||
1816 | dispc.irq_error_mask = DISPC_IRQ_MASK_ERROR; | ||
1817 | dispc_write_reg(DISPC_IRQSTATUS, DISPC_IRQ_SYNC_LOST_DIGIT); | ||
1818 | _omap_dispc_set_irqs(); | ||
1819 | spin_unlock_irqrestore(&dispc.irq_lock, flags); | ||
1820 | } | ||
1821 | |||
1822 | enable_clocks(0); | ||
1823 | } | ||
1824 | |||
1825 | void dispc_lcd_enable_signal_polarity(bool act_high) | ||
1826 | { | ||
1827 | enable_clocks(1); | ||
1828 | REG_FLD_MOD(DISPC_CONTROL, act_high ? 1 : 0, 29, 29); | ||
1829 | enable_clocks(0); | ||
1830 | } | ||
1831 | |||
1832 | void dispc_lcd_enable_signal(bool enable) | ||
1833 | { | ||
1834 | enable_clocks(1); | ||
1835 | REG_FLD_MOD(DISPC_CONTROL, enable ? 1 : 0, 28, 28); | ||
1836 | enable_clocks(0); | ||
1837 | } | ||
1838 | |||
1839 | void dispc_pck_free_enable(bool enable) | ||
1840 | { | ||
1841 | enable_clocks(1); | ||
1842 | REG_FLD_MOD(DISPC_CONTROL, enable ? 1 : 0, 27, 27); | ||
1843 | enable_clocks(0); | ||
1844 | } | ||
1845 | |||
1846 | void dispc_enable_fifohandcheck(bool enable) | ||
1847 | { | ||
1848 | enable_clocks(1); | ||
1849 | REG_FLD_MOD(DISPC_CONFIG, enable ? 1 : 0, 16, 16); | ||
1850 | enable_clocks(0); | ||
1851 | } | ||
1852 | |||
1853 | |||
1854 | void dispc_set_lcd_display_type(enum omap_lcd_display_type type) | ||
1855 | { | ||
1856 | int mode; | ||
1857 | |||
1858 | switch (type) { | ||
1859 | case OMAP_DSS_LCD_DISPLAY_STN: | ||
1860 | mode = 0; | ||
1861 | break; | ||
1862 | |||
1863 | case OMAP_DSS_LCD_DISPLAY_TFT: | ||
1864 | mode = 1; | ||
1865 | break; | ||
1866 | |||
1867 | default: | ||
1868 | BUG(); | ||
1869 | return; | ||
1870 | } | ||
1871 | |||
1872 | enable_clocks(1); | ||
1873 | REG_FLD_MOD(DISPC_CONTROL, mode, 3, 3); | ||
1874 | enable_clocks(0); | ||
1875 | } | ||
1876 | |||
1877 | void dispc_set_loadmode(enum omap_dss_load_mode mode) | ||
1878 | { | ||
1879 | enable_clocks(1); | ||
1880 | REG_FLD_MOD(DISPC_CONFIG, mode, 2, 1); | ||
1881 | enable_clocks(0); | ||
1882 | } | ||
1883 | |||
1884 | |||
1885 | void dispc_set_default_color(enum omap_channel channel, u32 color) | ||
1886 | { | ||
1887 | const struct dispc_reg def_reg[] = { DISPC_DEFAULT_COLOR0, | ||
1888 | DISPC_DEFAULT_COLOR1 }; | ||
1889 | |||
1890 | enable_clocks(1); | ||
1891 | dispc_write_reg(def_reg[channel], color); | ||
1892 | enable_clocks(0); | ||
1893 | } | ||
1894 | |||
1895 | u32 dispc_get_default_color(enum omap_channel channel) | ||
1896 | { | ||
1897 | const struct dispc_reg def_reg[] = { DISPC_DEFAULT_COLOR0, | ||
1898 | DISPC_DEFAULT_COLOR1 }; | ||
1899 | u32 l; | ||
1900 | |||
1901 | BUG_ON(channel != OMAP_DSS_CHANNEL_DIGIT && | ||
1902 | channel != OMAP_DSS_CHANNEL_LCD); | ||
1903 | |||
1904 | enable_clocks(1); | ||
1905 | l = dispc_read_reg(def_reg[channel]); | ||
1906 | enable_clocks(0); | ||
1907 | |||
1908 | return l; | ||
1909 | } | ||
1910 | |||
1911 | void dispc_set_trans_key(enum omap_channel ch, | ||
1912 | enum omap_dss_trans_key_type type, | ||
1913 | u32 trans_key) | ||
1914 | { | ||
1915 | const struct dispc_reg tr_reg[] = { | ||
1916 | DISPC_TRANS_COLOR0, DISPC_TRANS_COLOR1 }; | ||
1917 | |||
1918 | enable_clocks(1); | ||
1919 | if (ch == OMAP_DSS_CHANNEL_LCD) | ||
1920 | REG_FLD_MOD(DISPC_CONFIG, type, 11, 11); | ||
1921 | else /* OMAP_DSS_CHANNEL_DIGIT */ | ||
1922 | REG_FLD_MOD(DISPC_CONFIG, type, 13, 13); | ||
1923 | |||
1924 | dispc_write_reg(tr_reg[ch], trans_key); | ||
1925 | enable_clocks(0); | ||
1926 | } | ||
1927 | |||
1928 | void dispc_get_trans_key(enum omap_channel ch, | ||
1929 | enum omap_dss_trans_key_type *type, | ||
1930 | u32 *trans_key) | ||
1931 | { | ||
1932 | const struct dispc_reg tr_reg[] = { | ||
1933 | DISPC_TRANS_COLOR0, DISPC_TRANS_COLOR1 }; | ||
1934 | |||
1935 | enable_clocks(1); | ||
1936 | if (type) { | ||
1937 | if (ch == OMAP_DSS_CHANNEL_LCD) | ||
1938 | *type = REG_GET(DISPC_CONFIG, 11, 11); | ||
1939 | else if (ch == OMAP_DSS_CHANNEL_DIGIT) | ||
1940 | *type = REG_GET(DISPC_CONFIG, 13, 13); | ||
1941 | else | ||
1942 | BUG(); | ||
1943 | } | ||
1944 | |||
1945 | if (trans_key) | ||
1946 | *trans_key = dispc_read_reg(tr_reg[ch]); | ||
1947 | enable_clocks(0); | ||
1948 | } | ||
1949 | |||
1950 | void dispc_enable_trans_key(enum omap_channel ch, bool enable) | ||
1951 | { | ||
1952 | enable_clocks(1); | ||
1953 | if (ch == OMAP_DSS_CHANNEL_LCD) | ||
1954 | REG_FLD_MOD(DISPC_CONFIG, enable, 10, 10); | ||
1955 | else /* OMAP_DSS_CHANNEL_DIGIT */ | ||
1956 | REG_FLD_MOD(DISPC_CONFIG, enable, 12, 12); | ||
1957 | enable_clocks(0); | ||
1958 | } | ||
1959 | void dispc_enable_alpha_blending(enum omap_channel ch, bool enable) | ||
1960 | { | ||
1961 | if (cpu_is_omap24xx()) | ||
1962 | return; | ||
1963 | |||
1964 | enable_clocks(1); | ||
1965 | if (ch == OMAP_DSS_CHANNEL_LCD) | ||
1966 | REG_FLD_MOD(DISPC_CONFIG, enable, 18, 18); | ||
1967 | else /* OMAP_DSS_CHANNEL_DIGIT */ | ||
1968 | REG_FLD_MOD(DISPC_CONFIG, enable, 19, 19); | ||
1969 | enable_clocks(0); | ||
1970 | } | ||
1971 | bool dispc_alpha_blending_enabled(enum omap_channel ch) | ||
1972 | { | ||
1973 | bool enabled; | ||
1974 | |||
1975 | if (cpu_is_omap24xx()) | ||
1976 | return false; | ||
1977 | |||
1978 | enable_clocks(1); | ||
1979 | if (ch == OMAP_DSS_CHANNEL_LCD) | ||
1980 | enabled = REG_GET(DISPC_CONFIG, 18, 18); | ||
1981 | else if (ch == OMAP_DSS_CHANNEL_DIGIT) | ||
1982 | enabled = REG_GET(DISPC_CONFIG, 18, 18); | ||
1983 | else | ||
1984 | BUG(); | ||
1985 | enable_clocks(0); | ||
1986 | |||
1987 | return enabled; | ||
1988 | |||
1989 | } | ||
1990 | |||
1991 | |||
1992 | bool dispc_trans_key_enabled(enum omap_channel ch) | ||
1993 | { | ||
1994 | bool enabled; | ||
1995 | |||
1996 | enable_clocks(1); | ||
1997 | if (ch == OMAP_DSS_CHANNEL_LCD) | ||
1998 | enabled = REG_GET(DISPC_CONFIG, 10, 10); | ||
1999 | else if (ch == OMAP_DSS_CHANNEL_DIGIT) | ||
2000 | enabled = REG_GET(DISPC_CONFIG, 12, 12); | ||
2001 | else | ||
2002 | BUG(); | ||
2003 | enable_clocks(0); | ||
2004 | |||
2005 | return enabled; | ||
2006 | } | ||
2007 | |||
2008 | |||
2009 | void dispc_set_tft_data_lines(u8 data_lines) | ||
2010 | { | ||
2011 | int code; | ||
2012 | |||
2013 | switch (data_lines) { | ||
2014 | case 12: | ||
2015 | code = 0; | ||
2016 | break; | ||
2017 | case 16: | ||
2018 | code = 1; | ||
2019 | break; | ||
2020 | case 18: | ||
2021 | code = 2; | ||
2022 | break; | ||
2023 | case 24: | ||
2024 | code = 3; | ||
2025 | break; | ||
2026 | default: | ||
2027 | BUG(); | ||
2028 | return; | ||
2029 | } | ||
2030 | |||
2031 | enable_clocks(1); | ||
2032 | REG_FLD_MOD(DISPC_CONTROL, code, 9, 8); | ||
2033 | enable_clocks(0); | ||
2034 | } | ||
2035 | |||
2036 | void dispc_set_parallel_interface_mode(enum omap_parallel_interface_mode mode) | ||
2037 | { | ||
2038 | u32 l; | ||
2039 | int stallmode; | ||
2040 | int gpout0 = 1; | ||
2041 | int gpout1; | ||
2042 | |||
2043 | switch (mode) { | ||
2044 | case OMAP_DSS_PARALLELMODE_BYPASS: | ||
2045 | stallmode = 0; | ||
2046 | gpout1 = 1; | ||
2047 | break; | ||
2048 | |||
2049 | case OMAP_DSS_PARALLELMODE_RFBI: | ||
2050 | stallmode = 1; | ||
2051 | gpout1 = 0; | ||
2052 | break; | ||
2053 | |||
2054 | case OMAP_DSS_PARALLELMODE_DSI: | ||
2055 | stallmode = 1; | ||
2056 | gpout1 = 1; | ||
2057 | break; | ||
2058 | |||
2059 | default: | ||
2060 | BUG(); | ||
2061 | return; | ||
2062 | } | ||
2063 | |||
2064 | enable_clocks(1); | ||
2065 | |||
2066 | l = dispc_read_reg(DISPC_CONTROL); | ||
2067 | |||
2068 | l = FLD_MOD(l, stallmode, 11, 11); | ||
2069 | l = FLD_MOD(l, gpout0, 15, 15); | ||
2070 | l = FLD_MOD(l, gpout1, 16, 16); | ||
2071 | |||
2072 | dispc_write_reg(DISPC_CONTROL, l); | ||
2073 | |||
2074 | enable_clocks(0); | ||
2075 | } | ||
2076 | |||
2077 | static bool _dispc_lcd_timings_ok(int hsw, int hfp, int hbp, | ||
2078 | int vsw, int vfp, int vbp) | ||
2079 | { | ||
2080 | if (cpu_is_omap24xx() || omap_rev() < OMAP3430_REV_ES3_0) { | ||
2081 | if (hsw < 1 || hsw > 64 || | ||
2082 | hfp < 1 || hfp > 256 || | ||
2083 | hbp < 1 || hbp > 256 || | ||
2084 | vsw < 1 || vsw > 64 || | ||
2085 | vfp < 0 || vfp > 255 || | ||
2086 | vbp < 0 || vbp > 255) | ||
2087 | return false; | ||
2088 | } else { | ||
2089 | if (hsw < 1 || hsw > 256 || | ||
2090 | hfp < 1 || hfp > 4096 || | ||
2091 | hbp < 1 || hbp > 4096 || | ||
2092 | vsw < 1 || vsw > 256 || | ||
2093 | vfp < 0 || vfp > 4095 || | ||
2094 | vbp < 0 || vbp > 4095) | ||
2095 | return false; | ||
2096 | } | ||
2097 | |||
2098 | return true; | ||
2099 | } | ||
2100 | |||
2101 | bool dispc_lcd_timings_ok(struct omap_video_timings *timings) | ||
2102 | { | ||
2103 | return _dispc_lcd_timings_ok(timings->hsw, timings->hfp, | ||
2104 | timings->hbp, timings->vsw, | ||
2105 | timings->vfp, timings->vbp); | ||
2106 | } | ||
2107 | |||
2108 | static void _dispc_set_lcd_timings(int hsw, int hfp, int hbp, | ||
2109 | int vsw, int vfp, int vbp) | ||
2110 | { | ||
2111 | u32 timing_h, timing_v; | ||
2112 | |||
2113 | if (cpu_is_omap24xx() || omap_rev() < OMAP3430_REV_ES3_0) { | ||
2114 | timing_h = FLD_VAL(hsw-1, 5, 0) | FLD_VAL(hfp-1, 15, 8) | | ||
2115 | FLD_VAL(hbp-1, 27, 20); | ||
2116 | |||
2117 | timing_v = FLD_VAL(vsw-1, 5, 0) | FLD_VAL(vfp, 15, 8) | | ||
2118 | FLD_VAL(vbp, 27, 20); | ||
2119 | } else { | ||
2120 | timing_h = FLD_VAL(hsw-1, 7, 0) | FLD_VAL(hfp-1, 19, 8) | | ||
2121 | FLD_VAL(hbp-1, 31, 20); | ||
2122 | |||
2123 | timing_v = FLD_VAL(vsw-1, 7, 0) | FLD_VAL(vfp, 19, 8) | | ||
2124 | FLD_VAL(vbp, 31, 20); | ||
2125 | } | ||
2126 | |||
2127 | enable_clocks(1); | ||
2128 | dispc_write_reg(DISPC_TIMING_H, timing_h); | ||
2129 | dispc_write_reg(DISPC_TIMING_V, timing_v); | ||
2130 | enable_clocks(0); | ||
2131 | } | ||
2132 | |||
2133 | /* change name to mode? */ | ||
2134 | void dispc_set_lcd_timings(struct omap_video_timings *timings) | ||
2135 | { | ||
2136 | unsigned xtot, ytot; | ||
2137 | unsigned long ht, vt; | ||
2138 | |||
2139 | if (!_dispc_lcd_timings_ok(timings->hsw, timings->hfp, | ||
2140 | timings->hbp, timings->vsw, | ||
2141 | timings->vfp, timings->vbp)) | ||
2142 | BUG(); | ||
2143 | |||
2144 | _dispc_set_lcd_timings(timings->hsw, timings->hfp, timings->hbp, | ||
2145 | timings->vsw, timings->vfp, timings->vbp); | ||
2146 | |||
2147 | dispc_set_lcd_size(timings->x_res, timings->y_res); | ||
2148 | |||
2149 | xtot = timings->x_res + timings->hfp + timings->hsw + timings->hbp; | ||
2150 | ytot = timings->y_res + timings->vfp + timings->vsw + timings->vbp; | ||
2151 | |||
2152 | ht = (timings->pixel_clock * 1000) / xtot; | ||
2153 | vt = (timings->pixel_clock * 1000) / xtot / ytot; | ||
2154 | |||
2155 | DSSDBG("xres %u yres %u\n", timings->x_res, timings->y_res); | ||
2156 | DSSDBG("pck %u\n", timings->pixel_clock); | ||
2157 | DSSDBG("hsw %d hfp %d hbp %d vsw %d vfp %d vbp %d\n", | ||
2158 | timings->hsw, timings->hfp, timings->hbp, | ||
2159 | timings->vsw, timings->vfp, timings->vbp); | ||
2160 | |||
2161 | DSSDBG("hsync %luHz, vsync %luHz\n", ht, vt); | ||
2162 | } | ||
2163 | |||
2164 | static void dispc_set_lcd_divisor(u16 lck_div, u16 pck_div) | ||
2165 | { | ||
2166 | BUG_ON(lck_div < 1); | ||
2167 | BUG_ON(pck_div < 2); | ||
2168 | |||
2169 | enable_clocks(1); | ||
2170 | dispc_write_reg(DISPC_DIVISOR, | ||
2171 | FLD_VAL(lck_div, 23, 16) | FLD_VAL(pck_div, 7, 0)); | ||
2172 | enable_clocks(0); | ||
2173 | } | ||
2174 | |||
2175 | static void dispc_get_lcd_divisor(int *lck_div, int *pck_div) | ||
2176 | { | ||
2177 | u32 l; | ||
2178 | l = dispc_read_reg(DISPC_DIVISOR); | ||
2179 | *lck_div = FLD_GET(l, 23, 16); | ||
2180 | *pck_div = FLD_GET(l, 7, 0); | ||
2181 | } | ||
2182 | |||
2183 | unsigned long dispc_fclk_rate(void) | ||
2184 | { | ||
2185 | unsigned long r = 0; | ||
2186 | |||
2187 | if (dss_get_dispc_clk_source() == 0) | ||
2188 | r = dss_clk_get_rate(DSS_CLK_FCK1); | ||
2189 | else | ||
2190 | #ifdef CONFIG_OMAP2_DSS_DSI | ||
2191 | r = dsi_get_dsi1_pll_rate(); | ||
2192 | #else | ||
2193 | BUG(); | ||
2194 | #endif | ||
2195 | return r; | ||
2196 | } | ||
2197 | |||
2198 | unsigned long dispc_lclk_rate(void) | ||
2199 | { | ||
2200 | int lcd; | ||
2201 | unsigned long r; | ||
2202 | u32 l; | ||
2203 | |||
2204 | l = dispc_read_reg(DISPC_DIVISOR); | ||
2205 | |||
2206 | lcd = FLD_GET(l, 23, 16); | ||
2207 | |||
2208 | r = dispc_fclk_rate(); | ||
2209 | |||
2210 | return r / lcd; | ||
2211 | } | ||
2212 | |||
2213 | unsigned long dispc_pclk_rate(void) | ||
2214 | { | ||
2215 | int lcd, pcd; | ||
2216 | unsigned long r; | ||
2217 | u32 l; | ||
2218 | |||
2219 | l = dispc_read_reg(DISPC_DIVISOR); | ||
2220 | |||
2221 | lcd = FLD_GET(l, 23, 16); | ||
2222 | pcd = FLD_GET(l, 7, 0); | ||
2223 | |||
2224 | r = dispc_fclk_rate(); | ||
2225 | |||
2226 | return r / lcd / pcd; | ||
2227 | } | ||
2228 | |||
2229 | void dispc_dump_clocks(struct seq_file *s) | ||
2230 | { | ||
2231 | int lcd, pcd; | ||
2232 | |||
2233 | enable_clocks(1); | ||
2234 | |||
2235 | dispc_get_lcd_divisor(&lcd, &pcd); | ||
2236 | |||
2237 | seq_printf(s, "- DISPC -\n"); | ||
2238 | |||
2239 | seq_printf(s, "dispc fclk source = %s\n", | ||
2240 | dss_get_dispc_clk_source() == 0 ? | ||
2241 | "dss1_alwon_fclk" : "dsi1_pll_fclk"); | ||
2242 | |||
2243 | seq_printf(s, "fck\t\t%-16lu\n", dispc_fclk_rate()); | ||
2244 | seq_printf(s, "lck\t\t%-16lulck div\t%u\n", dispc_lclk_rate(), lcd); | ||
2245 | seq_printf(s, "pck\t\t%-16lupck div\t%u\n", dispc_pclk_rate(), pcd); | ||
2246 | |||
2247 | enable_clocks(0); | ||
2248 | } | ||
2249 | |||
2250 | void dispc_dump_regs(struct seq_file *s) | ||
2251 | { | ||
2252 | #define DUMPREG(r) seq_printf(s, "%-35s %08x\n", #r, dispc_read_reg(r)) | ||
2253 | |||
2254 | dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); | ||
2255 | |||
2256 | DUMPREG(DISPC_REVISION); | ||
2257 | DUMPREG(DISPC_SYSCONFIG); | ||
2258 | DUMPREG(DISPC_SYSSTATUS); | ||
2259 | DUMPREG(DISPC_IRQSTATUS); | ||
2260 | DUMPREG(DISPC_IRQENABLE); | ||
2261 | DUMPREG(DISPC_CONTROL); | ||
2262 | DUMPREG(DISPC_CONFIG); | ||
2263 | DUMPREG(DISPC_CAPABLE); | ||
2264 | DUMPREG(DISPC_DEFAULT_COLOR0); | ||
2265 | DUMPREG(DISPC_DEFAULT_COLOR1); | ||
2266 | DUMPREG(DISPC_TRANS_COLOR0); | ||
2267 | DUMPREG(DISPC_TRANS_COLOR1); | ||
2268 | DUMPREG(DISPC_LINE_STATUS); | ||
2269 | DUMPREG(DISPC_LINE_NUMBER); | ||
2270 | DUMPREG(DISPC_TIMING_H); | ||
2271 | DUMPREG(DISPC_TIMING_V); | ||
2272 | DUMPREG(DISPC_POL_FREQ); | ||
2273 | DUMPREG(DISPC_DIVISOR); | ||
2274 | DUMPREG(DISPC_GLOBAL_ALPHA); | ||
2275 | DUMPREG(DISPC_SIZE_DIG); | ||
2276 | DUMPREG(DISPC_SIZE_LCD); | ||
2277 | |||
2278 | DUMPREG(DISPC_GFX_BA0); | ||
2279 | DUMPREG(DISPC_GFX_BA1); | ||
2280 | DUMPREG(DISPC_GFX_POSITION); | ||
2281 | DUMPREG(DISPC_GFX_SIZE); | ||
2282 | DUMPREG(DISPC_GFX_ATTRIBUTES); | ||
2283 | DUMPREG(DISPC_GFX_FIFO_THRESHOLD); | ||
2284 | DUMPREG(DISPC_GFX_FIFO_SIZE_STATUS); | ||
2285 | DUMPREG(DISPC_GFX_ROW_INC); | ||
2286 | DUMPREG(DISPC_GFX_PIXEL_INC); | ||
2287 | DUMPREG(DISPC_GFX_WINDOW_SKIP); | ||
2288 | DUMPREG(DISPC_GFX_TABLE_BA); | ||
2289 | |||
2290 | DUMPREG(DISPC_DATA_CYCLE1); | ||
2291 | DUMPREG(DISPC_DATA_CYCLE2); | ||
2292 | DUMPREG(DISPC_DATA_CYCLE3); | ||
2293 | |||
2294 | DUMPREG(DISPC_CPR_COEF_R); | ||
2295 | DUMPREG(DISPC_CPR_COEF_G); | ||
2296 | DUMPREG(DISPC_CPR_COEF_B); | ||
2297 | |||
2298 | DUMPREG(DISPC_GFX_PRELOAD); | ||
2299 | |||
2300 | DUMPREG(DISPC_VID_BA0(0)); | ||
2301 | DUMPREG(DISPC_VID_BA1(0)); | ||
2302 | DUMPREG(DISPC_VID_POSITION(0)); | ||
2303 | DUMPREG(DISPC_VID_SIZE(0)); | ||
2304 | DUMPREG(DISPC_VID_ATTRIBUTES(0)); | ||
2305 | DUMPREG(DISPC_VID_FIFO_THRESHOLD(0)); | ||
2306 | DUMPREG(DISPC_VID_FIFO_SIZE_STATUS(0)); | ||
2307 | DUMPREG(DISPC_VID_ROW_INC(0)); | ||
2308 | DUMPREG(DISPC_VID_PIXEL_INC(0)); | ||
2309 | DUMPREG(DISPC_VID_FIR(0)); | ||
2310 | DUMPREG(DISPC_VID_PICTURE_SIZE(0)); | ||
2311 | DUMPREG(DISPC_VID_ACCU0(0)); | ||
2312 | DUMPREG(DISPC_VID_ACCU1(0)); | ||
2313 | |||
2314 | DUMPREG(DISPC_VID_BA0(1)); | ||
2315 | DUMPREG(DISPC_VID_BA1(1)); | ||
2316 | DUMPREG(DISPC_VID_POSITION(1)); | ||
2317 | DUMPREG(DISPC_VID_SIZE(1)); | ||
2318 | DUMPREG(DISPC_VID_ATTRIBUTES(1)); | ||
2319 | DUMPREG(DISPC_VID_FIFO_THRESHOLD(1)); | ||
2320 | DUMPREG(DISPC_VID_FIFO_SIZE_STATUS(1)); | ||
2321 | DUMPREG(DISPC_VID_ROW_INC(1)); | ||
2322 | DUMPREG(DISPC_VID_PIXEL_INC(1)); | ||
2323 | DUMPREG(DISPC_VID_FIR(1)); | ||
2324 | DUMPREG(DISPC_VID_PICTURE_SIZE(1)); | ||
2325 | DUMPREG(DISPC_VID_ACCU0(1)); | ||
2326 | DUMPREG(DISPC_VID_ACCU1(1)); | ||
2327 | |||
2328 | DUMPREG(DISPC_VID_FIR_COEF_H(0, 0)); | ||
2329 | DUMPREG(DISPC_VID_FIR_COEF_H(0, 1)); | ||
2330 | DUMPREG(DISPC_VID_FIR_COEF_H(0, 2)); | ||
2331 | DUMPREG(DISPC_VID_FIR_COEF_H(0, 3)); | ||
2332 | DUMPREG(DISPC_VID_FIR_COEF_H(0, 4)); | ||
2333 | DUMPREG(DISPC_VID_FIR_COEF_H(0, 5)); | ||
2334 | DUMPREG(DISPC_VID_FIR_COEF_H(0, 6)); | ||
2335 | DUMPREG(DISPC_VID_FIR_COEF_H(0, 7)); | ||
2336 | DUMPREG(DISPC_VID_FIR_COEF_HV(0, 0)); | ||
2337 | DUMPREG(DISPC_VID_FIR_COEF_HV(0, 1)); | ||
2338 | DUMPREG(DISPC_VID_FIR_COEF_HV(0, 2)); | ||
2339 | DUMPREG(DISPC_VID_FIR_COEF_HV(0, 3)); | ||
2340 | DUMPREG(DISPC_VID_FIR_COEF_HV(0, 4)); | ||
2341 | DUMPREG(DISPC_VID_FIR_COEF_HV(0, 5)); | ||
2342 | DUMPREG(DISPC_VID_FIR_COEF_HV(0, 6)); | ||
2343 | DUMPREG(DISPC_VID_FIR_COEF_HV(0, 7)); | ||
2344 | DUMPREG(DISPC_VID_CONV_COEF(0, 0)); | ||
2345 | DUMPREG(DISPC_VID_CONV_COEF(0, 1)); | ||
2346 | DUMPREG(DISPC_VID_CONV_COEF(0, 2)); | ||
2347 | DUMPREG(DISPC_VID_CONV_COEF(0, 3)); | ||
2348 | DUMPREG(DISPC_VID_CONV_COEF(0, 4)); | ||
2349 | DUMPREG(DISPC_VID_FIR_COEF_V(0, 0)); | ||
2350 | DUMPREG(DISPC_VID_FIR_COEF_V(0, 1)); | ||
2351 | DUMPREG(DISPC_VID_FIR_COEF_V(0, 2)); | ||
2352 | DUMPREG(DISPC_VID_FIR_COEF_V(0, 3)); | ||
2353 | DUMPREG(DISPC_VID_FIR_COEF_V(0, 4)); | ||
2354 | DUMPREG(DISPC_VID_FIR_COEF_V(0, 5)); | ||
2355 | DUMPREG(DISPC_VID_FIR_COEF_V(0, 6)); | ||
2356 | DUMPREG(DISPC_VID_FIR_COEF_V(0, 7)); | ||
2357 | |||
2358 | DUMPREG(DISPC_VID_FIR_COEF_H(1, 0)); | ||
2359 | DUMPREG(DISPC_VID_FIR_COEF_H(1, 1)); | ||
2360 | DUMPREG(DISPC_VID_FIR_COEF_H(1, 2)); | ||
2361 | DUMPREG(DISPC_VID_FIR_COEF_H(1, 3)); | ||
2362 | DUMPREG(DISPC_VID_FIR_COEF_H(1, 4)); | ||
2363 | DUMPREG(DISPC_VID_FIR_COEF_H(1, 5)); | ||
2364 | DUMPREG(DISPC_VID_FIR_COEF_H(1, 6)); | ||
2365 | DUMPREG(DISPC_VID_FIR_COEF_H(1, 7)); | ||
2366 | DUMPREG(DISPC_VID_FIR_COEF_HV(1, 0)); | ||
2367 | DUMPREG(DISPC_VID_FIR_COEF_HV(1, 1)); | ||
2368 | DUMPREG(DISPC_VID_FIR_COEF_HV(1, 2)); | ||
2369 | DUMPREG(DISPC_VID_FIR_COEF_HV(1, 3)); | ||
2370 | DUMPREG(DISPC_VID_FIR_COEF_HV(1, 4)); | ||
2371 | DUMPREG(DISPC_VID_FIR_COEF_HV(1, 5)); | ||
2372 | DUMPREG(DISPC_VID_FIR_COEF_HV(1, 6)); | ||
2373 | DUMPREG(DISPC_VID_FIR_COEF_HV(1, 7)); | ||
2374 | DUMPREG(DISPC_VID_CONV_COEF(1, 0)); | ||
2375 | DUMPREG(DISPC_VID_CONV_COEF(1, 1)); | ||
2376 | DUMPREG(DISPC_VID_CONV_COEF(1, 2)); | ||
2377 | DUMPREG(DISPC_VID_CONV_COEF(1, 3)); | ||
2378 | DUMPREG(DISPC_VID_CONV_COEF(1, 4)); | ||
2379 | DUMPREG(DISPC_VID_FIR_COEF_V(1, 0)); | ||
2380 | DUMPREG(DISPC_VID_FIR_COEF_V(1, 1)); | ||
2381 | DUMPREG(DISPC_VID_FIR_COEF_V(1, 2)); | ||
2382 | DUMPREG(DISPC_VID_FIR_COEF_V(1, 3)); | ||
2383 | DUMPREG(DISPC_VID_FIR_COEF_V(1, 4)); | ||
2384 | DUMPREG(DISPC_VID_FIR_COEF_V(1, 5)); | ||
2385 | DUMPREG(DISPC_VID_FIR_COEF_V(1, 6)); | ||
2386 | DUMPREG(DISPC_VID_FIR_COEF_V(1, 7)); | ||
2387 | |||
2388 | DUMPREG(DISPC_VID_PRELOAD(0)); | ||
2389 | DUMPREG(DISPC_VID_PRELOAD(1)); | ||
2390 | |||
2391 | dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); | ||
2392 | #undef DUMPREG | ||
2393 | } | ||
2394 | |||
2395 | static void _dispc_set_pol_freq(bool onoff, bool rf, bool ieo, bool ipc, | ||
2396 | bool ihs, bool ivs, u8 acbi, u8 acb) | ||
2397 | { | ||
2398 | u32 l = 0; | ||
2399 | |||
2400 | DSSDBG("onoff %d rf %d ieo %d ipc %d ihs %d ivs %d acbi %d acb %d\n", | ||
2401 | onoff, rf, ieo, ipc, ihs, ivs, acbi, acb); | ||
2402 | |||
2403 | l |= FLD_VAL(onoff, 17, 17); | ||
2404 | l |= FLD_VAL(rf, 16, 16); | ||
2405 | l |= FLD_VAL(ieo, 15, 15); | ||
2406 | l |= FLD_VAL(ipc, 14, 14); | ||
2407 | l |= FLD_VAL(ihs, 13, 13); | ||
2408 | l |= FLD_VAL(ivs, 12, 12); | ||
2409 | l |= FLD_VAL(acbi, 11, 8); | ||
2410 | l |= FLD_VAL(acb, 7, 0); | ||
2411 | |||
2412 | enable_clocks(1); | ||
2413 | dispc_write_reg(DISPC_POL_FREQ, l); | ||
2414 | enable_clocks(0); | ||
2415 | } | ||
2416 | |||
2417 | void dispc_set_pol_freq(enum omap_panel_config config, u8 acbi, u8 acb) | ||
2418 | { | ||
2419 | _dispc_set_pol_freq((config & OMAP_DSS_LCD_ONOFF) != 0, | ||
2420 | (config & OMAP_DSS_LCD_RF) != 0, | ||
2421 | (config & OMAP_DSS_LCD_IEO) != 0, | ||
2422 | (config & OMAP_DSS_LCD_IPC) != 0, | ||
2423 | (config & OMAP_DSS_LCD_IHS) != 0, | ||
2424 | (config & OMAP_DSS_LCD_IVS) != 0, | ||
2425 | acbi, acb); | ||
2426 | } | ||
2427 | |||
2428 | /* with fck as input clock rate, find dispc dividers that produce req_pck */ | ||
2429 | void dispc_find_clk_divs(bool is_tft, unsigned long req_pck, unsigned long fck, | ||
2430 | struct dispc_clock_info *cinfo) | ||
2431 | { | ||
2432 | u16 pcd_min = is_tft ? 2 : 3; | ||
2433 | unsigned long best_pck; | ||
2434 | u16 best_ld, cur_ld; | ||
2435 | u16 best_pd, cur_pd; | ||
2436 | |||
2437 | best_pck = 0; | ||
2438 | best_ld = 0; | ||
2439 | best_pd = 0; | ||
2440 | |||
2441 | for (cur_ld = 1; cur_ld <= 255; ++cur_ld) { | ||
2442 | unsigned long lck = fck / cur_ld; | ||
2443 | |||
2444 | for (cur_pd = pcd_min; cur_pd <= 255; ++cur_pd) { | ||
2445 | unsigned long pck = lck / cur_pd; | ||
2446 | long old_delta = abs(best_pck - req_pck); | ||
2447 | long new_delta = abs(pck - req_pck); | ||
2448 | |||
2449 | if (best_pck == 0 || new_delta < old_delta) { | ||
2450 | best_pck = pck; | ||
2451 | best_ld = cur_ld; | ||
2452 | best_pd = cur_pd; | ||
2453 | |||
2454 | if (pck == req_pck) | ||
2455 | goto found; | ||
2456 | } | ||
2457 | |||
2458 | if (pck < req_pck) | ||
2459 | break; | ||
2460 | } | ||
2461 | |||
2462 | if (lck / pcd_min < req_pck) | ||
2463 | break; | ||
2464 | } | ||
2465 | |||
2466 | found: | ||
2467 | cinfo->lck_div = best_ld; | ||
2468 | cinfo->pck_div = best_pd; | ||
2469 | cinfo->lck = fck / cinfo->lck_div; | ||
2470 | cinfo->pck = cinfo->lck / cinfo->pck_div; | ||
2471 | } | ||
2472 | |||
2473 | /* calculate clock rates using dividers in cinfo */ | ||
2474 | int dispc_calc_clock_rates(unsigned long dispc_fclk_rate, | ||
2475 | struct dispc_clock_info *cinfo) | ||
2476 | { | ||
2477 | if (cinfo->lck_div > 255 || cinfo->lck_div == 0) | ||
2478 | return -EINVAL; | ||
2479 | if (cinfo->pck_div < 2 || cinfo->pck_div > 255) | ||
2480 | return -EINVAL; | ||
2481 | |||
2482 | cinfo->lck = dispc_fclk_rate / cinfo->lck_div; | ||
2483 | cinfo->pck = cinfo->lck / cinfo->pck_div; | ||
2484 | |||
2485 | return 0; | ||
2486 | } | ||
2487 | |||
2488 | int dispc_set_clock_div(struct dispc_clock_info *cinfo) | ||
2489 | { | ||
2490 | DSSDBG("lck = %lu (%u)\n", cinfo->lck, cinfo->lck_div); | ||
2491 | DSSDBG("pck = %lu (%u)\n", cinfo->pck, cinfo->pck_div); | ||
2492 | |||
2493 | dispc_set_lcd_divisor(cinfo->lck_div, cinfo->pck_div); | ||
2494 | |||
2495 | return 0; | ||
2496 | } | ||
2497 | |||
2498 | int dispc_get_clock_div(struct dispc_clock_info *cinfo) | ||
2499 | { | ||
2500 | unsigned long fck; | ||
2501 | |||
2502 | fck = dispc_fclk_rate(); | ||
2503 | |||
2504 | cinfo->lck_div = REG_GET(DISPC_DIVISOR, 23, 16); | ||
2505 | cinfo->pck_div = REG_GET(DISPC_DIVISOR, 7, 0); | ||
2506 | |||
2507 | cinfo->lck = fck / cinfo->lck_div; | ||
2508 | cinfo->pck = cinfo->lck / cinfo->pck_div; | ||
2509 | |||
2510 | return 0; | ||
2511 | } | ||
2512 | |||
2513 | /* dispc.irq_lock has to be locked by the caller */ | ||
2514 | static void _omap_dispc_set_irqs(void) | ||
2515 | { | ||
2516 | u32 mask; | ||
2517 | u32 old_mask; | ||
2518 | int i; | ||
2519 | struct omap_dispc_isr_data *isr_data; | ||
2520 | |||
2521 | mask = dispc.irq_error_mask; | ||
2522 | |||
2523 | for (i = 0; i < DISPC_MAX_NR_ISRS; i++) { | ||
2524 | isr_data = &dispc.registered_isr[i]; | ||
2525 | |||
2526 | if (isr_data->isr == NULL) | ||
2527 | continue; | ||
2528 | |||
2529 | mask |= isr_data->mask; | ||
2530 | } | ||
2531 | |||
2532 | enable_clocks(1); | ||
2533 | |||
2534 | old_mask = dispc_read_reg(DISPC_IRQENABLE); | ||
2535 | /* clear the irqstatus for newly enabled irqs */ | ||
2536 | dispc_write_reg(DISPC_IRQSTATUS, (mask ^ old_mask) & mask); | ||
2537 | |||
2538 | dispc_write_reg(DISPC_IRQENABLE, mask); | ||
2539 | |||
2540 | enable_clocks(0); | ||
2541 | } | ||
2542 | |||
2543 | int omap_dispc_register_isr(omap_dispc_isr_t isr, void *arg, u32 mask) | ||
2544 | { | ||
2545 | int i; | ||
2546 | int ret; | ||
2547 | unsigned long flags; | ||
2548 | struct omap_dispc_isr_data *isr_data; | ||
2549 | |||
2550 | if (isr == NULL) | ||
2551 | return -EINVAL; | ||
2552 | |||
2553 | spin_lock_irqsave(&dispc.irq_lock, flags); | ||
2554 | |||
2555 | /* check for duplicate entry */ | ||
2556 | for (i = 0; i < DISPC_MAX_NR_ISRS; i++) { | ||
2557 | isr_data = &dispc.registered_isr[i]; | ||
2558 | if (isr_data->isr == isr && isr_data->arg == arg && | ||
2559 | isr_data->mask == mask) { | ||
2560 | ret = -EINVAL; | ||
2561 | goto err; | ||
2562 | } | ||
2563 | } | ||
2564 | |||
2565 | isr_data = NULL; | ||
2566 | ret = -EBUSY; | ||
2567 | |||
2568 | for (i = 0; i < DISPC_MAX_NR_ISRS; i++) { | ||
2569 | isr_data = &dispc.registered_isr[i]; | ||
2570 | |||
2571 | if (isr_data->isr != NULL) | ||
2572 | continue; | ||
2573 | |||
2574 | isr_data->isr = isr; | ||
2575 | isr_data->arg = arg; | ||
2576 | isr_data->mask = mask; | ||
2577 | ret = 0; | ||
2578 | |||
2579 | break; | ||
2580 | } | ||
2581 | |||
2582 | _omap_dispc_set_irqs(); | ||
2583 | |||
2584 | spin_unlock_irqrestore(&dispc.irq_lock, flags); | ||
2585 | |||
2586 | return 0; | ||
2587 | err: | ||
2588 | spin_unlock_irqrestore(&dispc.irq_lock, flags); | ||
2589 | |||
2590 | return ret; | ||
2591 | } | ||
2592 | EXPORT_SYMBOL(omap_dispc_register_isr); | ||
2593 | |||
2594 | int omap_dispc_unregister_isr(omap_dispc_isr_t isr, void *arg, u32 mask) | ||
2595 | { | ||
2596 | int i; | ||
2597 | unsigned long flags; | ||
2598 | int ret = -EINVAL; | ||
2599 | struct omap_dispc_isr_data *isr_data; | ||
2600 | |||
2601 | spin_lock_irqsave(&dispc.irq_lock, flags); | ||
2602 | |||
2603 | for (i = 0; i < DISPC_MAX_NR_ISRS; i++) { | ||
2604 | isr_data = &dispc.registered_isr[i]; | ||
2605 | if (isr_data->isr != isr || isr_data->arg != arg || | ||
2606 | isr_data->mask != mask) | ||
2607 | continue; | ||
2608 | |||
2609 | /* found the correct isr */ | ||
2610 | |||
2611 | isr_data->isr = NULL; | ||
2612 | isr_data->arg = NULL; | ||
2613 | isr_data->mask = 0; | ||
2614 | |||
2615 | ret = 0; | ||
2616 | break; | ||
2617 | } | ||
2618 | |||
2619 | if (ret == 0) | ||
2620 | _omap_dispc_set_irqs(); | ||
2621 | |||
2622 | spin_unlock_irqrestore(&dispc.irq_lock, flags); | ||
2623 | |||
2624 | return ret; | ||
2625 | } | ||
2626 | EXPORT_SYMBOL(omap_dispc_unregister_isr); | ||
2627 | |||
2628 | #ifdef DEBUG | ||
2629 | static void print_irq_status(u32 status) | ||
2630 | { | ||
2631 | if ((status & dispc.irq_error_mask) == 0) | ||
2632 | return; | ||
2633 | |||
2634 | printk(KERN_DEBUG "DISPC IRQ: 0x%x: ", status); | ||
2635 | |||
2636 | #define PIS(x) \ | ||
2637 | if (status & DISPC_IRQ_##x) \ | ||
2638 | printk(#x " "); | ||
2639 | PIS(GFX_FIFO_UNDERFLOW); | ||
2640 | PIS(OCP_ERR); | ||
2641 | PIS(VID1_FIFO_UNDERFLOW); | ||
2642 | PIS(VID2_FIFO_UNDERFLOW); | ||
2643 | PIS(SYNC_LOST); | ||
2644 | PIS(SYNC_LOST_DIGIT); | ||
2645 | #undef PIS | ||
2646 | |||
2647 | printk("\n"); | ||
2648 | } | ||
2649 | #endif | ||
2650 | |||
2651 | /* Called from dss.c. Note that we don't touch clocks here, | ||
2652 | * but we presume they are on because we got an IRQ. However, | ||
2653 | * an irq handler may turn the clocks off, so we may not have | ||
2654 | * clock later in the function. */ | ||
2655 | void dispc_irq_handler(void) | ||
2656 | { | ||
2657 | int i; | ||
2658 | u32 irqstatus; | ||
2659 | u32 handledirqs = 0; | ||
2660 | u32 unhandled_errors; | ||
2661 | struct omap_dispc_isr_data *isr_data; | ||
2662 | struct omap_dispc_isr_data registered_isr[DISPC_MAX_NR_ISRS]; | ||
2663 | |||
2664 | spin_lock(&dispc.irq_lock); | ||
2665 | |||
2666 | irqstatus = dispc_read_reg(DISPC_IRQSTATUS); | ||
2667 | |||
2668 | #ifdef DEBUG | ||
2669 | if (dss_debug) | ||
2670 | print_irq_status(irqstatus); | ||
2671 | #endif | ||
2672 | /* Ack the interrupt. Do it here before clocks are possibly turned | ||
2673 | * off */ | ||
2674 | dispc_write_reg(DISPC_IRQSTATUS, irqstatus); | ||
2675 | /* flush posted write */ | ||
2676 | dispc_read_reg(DISPC_IRQSTATUS); | ||
2677 | |||
2678 | /* make a copy and unlock, so that isrs can unregister | ||
2679 | * themselves */ | ||
2680 | memcpy(registered_isr, dispc.registered_isr, | ||
2681 | sizeof(registered_isr)); | ||
2682 | |||
2683 | spin_unlock(&dispc.irq_lock); | ||
2684 | |||
2685 | for (i = 0; i < DISPC_MAX_NR_ISRS; i++) { | ||
2686 | isr_data = ®istered_isr[i]; | ||
2687 | |||
2688 | if (!isr_data->isr) | ||
2689 | continue; | ||
2690 | |||
2691 | if (isr_data->mask & irqstatus) { | ||
2692 | isr_data->isr(isr_data->arg, irqstatus); | ||
2693 | handledirqs |= isr_data->mask; | ||
2694 | } | ||
2695 | } | ||
2696 | |||
2697 | spin_lock(&dispc.irq_lock); | ||
2698 | |||
2699 | unhandled_errors = irqstatus & ~handledirqs & dispc.irq_error_mask; | ||
2700 | |||
2701 | if (unhandled_errors) { | ||
2702 | dispc.error_irqs |= unhandled_errors; | ||
2703 | |||
2704 | dispc.irq_error_mask &= ~unhandled_errors; | ||
2705 | _omap_dispc_set_irqs(); | ||
2706 | |||
2707 | schedule_work(&dispc.error_work); | ||
2708 | } | ||
2709 | |||
2710 | spin_unlock(&dispc.irq_lock); | ||
2711 | } | ||
2712 | |||
2713 | static void dispc_error_worker(struct work_struct *work) | ||
2714 | { | ||
2715 | int i; | ||
2716 | u32 errors; | ||
2717 | unsigned long flags; | ||
2718 | |||
2719 | spin_lock_irqsave(&dispc.irq_lock, flags); | ||
2720 | errors = dispc.error_irqs; | ||
2721 | dispc.error_irqs = 0; | ||
2722 | spin_unlock_irqrestore(&dispc.irq_lock, flags); | ||
2723 | |||
2724 | if (errors & DISPC_IRQ_GFX_FIFO_UNDERFLOW) { | ||
2725 | DSSERR("GFX_FIFO_UNDERFLOW, disabling GFX\n"); | ||
2726 | for (i = 0; i < omap_dss_get_num_overlays(); ++i) { | ||
2727 | struct omap_overlay *ovl; | ||
2728 | ovl = omap_dss_get_overlay(i); | ||
2729 | |||
2730 | if (!(ovl->caps & OMAP_DSS_OVL_CAP_DISPC)) | ||
2731 | continue; | ||
2732 | |||
2733 | if (ovl->id == 0) { | ||
2734 | dispc_enable_plane(ovl->id, 0); | ||
2735 | dispc_go(ovl->manager->id); | ||
2736 | mdelay(50); | ||
2737 | break; | ||
2738 | } | ||
2739 | } | ||
2740 | } | ||
2741 | |||
2742 | if (errors & DISPC_IRQ_VID1_FIFO_UNDERFLOW) { | ||
2743 | DSSERR("VID1_FIFO_UNDERFLOW, disabling VID1\n"); | ||
2744 | for (i = 0; i < omap_dss_get_num_overlays(); ++i) { | ||
2745 | struct omap_overlay *ovl; | ||
2746 | ovl = omap_dss_get_overlay(i); | ||
2747 | |||
2748 | if (!(ovl->caps & OMAP_DSS_OVL_CAP_DISPC)) | ||
2749 | continue; | ||
2750 | |||
2751 | if (ovl->id == 1) { | ||
2752 | dispc_enable_plane(ovl->id, 0); | ||
2753 | dispc_go(ovl->manager->id); | ||
2754 | mdelay(50); | ||
2755 | break; | ||
2756 | } | ||
2757 | } | ||
2758 | } | ||
2759 | |||
2760 | if (errors & DISPC_IRQ_VID2_FIFO_UNDERFLOW) { | ||
2761 | DSSERR("VID2_FIFO_UNDERFLOW, disabling VID2\n"); | ||
2762 | for (i = 0; i < omap_dss_get_num_overlays(); ++i) { | ||
2763 | struct omap_overlay *ovl; | ||
2764 | ovl = omap_dss_get_overlay(i); | ||
2765 | |||
2766 | if (!(ovl->caps & OMAP_DSS_OVL_CAP_DISPC)) | ||
2767 | continue; | ||
2768 | |||
2769 | if (ovl->id == 2) { | ||
2770 | dispc_enable_plane(ovl->id, 0); | ||
2771 | dispc_go(ovl->manager->id); | ||
2772 | mdelay(50); | ||
2773 | break; | ||
2774 | } | ||
2775 | } | ||
2776 | } | ||
2777 | |||
2778 | if (errors & DISPC_IRQ_SYNC_LOST) { | ||
2779 | struct omap_overlay_manager *manager = NULL; | ||
2780 | bool enable = false; | ||
2781 | |||
2782 | DSSERR("SYNC_LOST, disabling LCD\n"); | ||
2783 | |||
2784 | for (i = 0; i < omap_dss_get_num_overlay_managers(); ++i) { | ||
2785 | struct omap_overlay_manager *mgr; | ||
2786 | mgr = omap_dss_get_overlay_manager(i); | ||
2787 | |||
2788 | if (mgr->id == OMAP_DSS_CHANNEL_LCD) { | ||
2789 | manager = mgr; | ||
2790 | enable = mgr->device->state == | ||
2791 | OMAP_DSS_DISPLAY_ACTIVE; | ||
2792 | mgr->device->disable(mgr->device); | ||
2793 | break; | ||
2794 | } | ||
2795 | } | ||
2796 | |||
2797 | if (manager) { | ||
2798 | for (i = 0; i < omap_dss_get_num_overlays(); ++i) { | ||
2799 | struct omap_overlay *ovl; | ||
2800 | ovl = omap_dss_get_overlay(i); | ||
2801 | |||
2802 | if (!(ovl->caps & OMAP_DSS_OVL_CAP_DISPC)) | ||
2803 | continue; | ||
2804 | |||
2805 | if (ovl->id != 0 && ovl->manager == manager) | ||
2806 | dispc_enable_plane(ovl->id, 0); | ||
2807 | } | ||
2808 | |||
2809 | dispc_go(manager->id); | ||
2810 | mdelay(50); | ||
2811 | if (enable) | ||
2812 | manager->device->enable(manager->device); | ||
2813 | } | ||
2814 | } | ||
2815 | |||
2816 | if (errors & DISPC_IRQ_SYNC_LOST_DIGIT) { | ||
2817 | struct omap_overlay_manager *manager = NULL; | ||
2818 | bool enable = false; | ||
2819 | |||
2820 | DSSERR("SYNC_LOST_DIGIT, disabling TV\n"); | ||
2821 | |||
2822 | for (i = 0; i < omap_dss_get_num_overlay_managers(); ++i) { | ||
2823 | struct omap_overlay_manager *mgr; | ||
2824 | mgr = omap_dss_get_overlay_manager(i); | ||
2825 | |||
2826 | if (mgr->id == OMAP_DSS_CHANNEL_DIGIT) { | ||
2827 | manager = mgr; | ||
2828 | enable = mgr->device->state == | ||
2829 | OMAP_DSS_DISPLAY_ACTIVE; | ||
2830 | mgr->device->disable(mgr->device); | ||
2831 | break; | ||
2832 | } | ||
2833 | } | ||
2834 | |||
2835 | if (manager) { | ||
2836 | for (i = 0; i < omap_dss_get_num_overlays(); ++i) { | ||
2837 | struct omap_overlay *ovl; | ||
2838 | ovl = omap_dss_get_overlay(i); | ||
2839 | |||
2840 | if (!(ovl->caps & OMAP_DSS_OVL_CAP_DISPC)) | ||
2841 | continue; | ||
2842 | |||
2843 | if (ovl->id != 0 && ovl->manager == manager) | ||
2844 | dispc_enable_plane(ovl->id, 0); | ||
2845 | } | ||
2846 | |||
2847 | dispc_go(manager->id); | ||
2848 | mdelay(50); | ||
2849 | if (enable) | ||
2850 | manager->device->enable(manager->device); | ||
2851 | } | ||
2852 | } | ||
2853 | |||
2854 | if (errors & DISPC_IRQ_OCP_ERR) { | ||
2855 | DSSERR("OCP_ERR\n"); | ||
2856 | for (i = 0; i < omap_dss_get_num_overlay_managers(); ++i) { | ||
2857 | struct omap_overlay_manager *mgr; | ||
2858 | mgr = omap_dss_get_overlay_manager(i); | ||
2859 | |||
2860 | if (mgr->caps & OMAP_DSS_OVL_CAP_DISPC) | ||
2861 | mgr->device->disable(mgr->device); | ||
2862 | } | ||
2863 | } | ||
2864 | |||
2865 | spin_lock_irqsave(&dispc.irq_lock, flags); | ||
2866 | dispc.irq_error_mask |= errors; | ||
2867 | _omap_dispc_set_irqs(); | ||
2868 | spin_unlock_irqrestore(&dispc.irq_lock, flags); | ||
2869 | } | ||
2870 | |||
2871 | int omap_dispc_wait_for_irq_timeout(u32 irqmask, unsigned long timeout) | ||
2872 | { | ||
2873 | void dispc_irq_wait_handler(void *data, u32 mask) | ||
2874 | { | ||
2875 | complete((struct completion *)data); | ||
2876 | } | ||
2877 | |||
2878 | int r; | ||
2879 | DECLARE_COMPLETION_ONSTACK(completion); | ||
2880 | |||
2881 | r = omap_dispc_register_isr(dispc_irq_wait_handler, &completion, | ||
2882 | irqmask); | ||
2883 | |||
2884 | if (r) | ||
2885 | return r; | ||
2886 | |||
2887 | timeout = wait_for_completion_timeout(&completion, timeout); | ||
2888 | |||
2889 | omap_dispc_unregister_isr(dispc_irq_wait_handler, &completion, irqmask); | ||
2890 | |||
2891 | if (timeout == 0) | ||
2892 | return -ETIMEDOUT; | ||
2893 | |||
2894 | if (timeout == -ERESTARTSYS) | ||
2895 | return -ERESTARTSYS; | ||
2896 | |||
2897 | return 0; | ||
2898 | } | ||
2899 | |||
2900 | int omap_dispc_wait_for_irq_interruptible_timeout(u32 irqmask, | ||
2901 | unsigned long timeout) | ||
2902 | { | ||
2903 | void dispc_irq_wait_handler(void *data, u32 mask) | ||
2904 | { | ||
2905 | complete((struct completion *)data); | ||
2906 | } | ||
2907 | |||
2908 | int r; | ||
2909 | DECLARE_COMPLETION_ONSTACK(completion); | ||
2910 | |||
2911 | r = omap_dispc_register_isr(dispc_irq_wait_handler, &completion, | ||
2912 | irqmask); | ||
2913 | |||
2914 | if (r) | ||
2915 | return r; | ||
2916 | |||
2917 | timeout = wait_for_completion_interruptible_timeout(&completion, | ||
2918 | timeout); | ||
2919 | |||
2920 | omap_dispc_unregister_isr(dispc_irq_wait_handler, &completion, irqmask); | ||
2921 | |||
2922 | if (timeout == 0) | ||
2923 | return -ETIMEDOUT; | ||
2924 | |||
2925 | if (timeout == -ERESTARTSYS) | ||
2926 | return -ERESTARTSYS; | ||
2927 | |||
2928 | return 0; | ||
2929 | } | ||
2930 | |||
2931 | #ifdef CONFIG_OMAP2_DSS_FAKE_VSYNC | ||
2932 | void dispc_fake_vsync_irq(void) | ||
2933 | { | ||
2934 | u32 irqstatus = DISPC_IRQ_VSYNC; | ||
2935 | int i; | ||
2936 | |||
2937 | local_irq_disable(); | ||
2938 | |||
2939 | for (i = 0; i < DISPC_MAX_NR_ISRS; i++) { | ||
2940 | struct omap_dispc_isr_data *isr_data; | ||
2941 | isr_data = &dispc.registered_isr[i]; | ||
2942 | |||
2943 | if (!isr_data->isr) | ||
2944 | continue; | ||
2945 | |||
2946 | if (isr_data->mask & irqstatus) | ||
2947 | isr_data->isr(isr_data->arg, irqstatus); | ||
2948 | } | ||
2949 | |||
2950 | local_irq_enable(); | ||
2951 | } | ||
2952 | #endif | ||
2953 | |||
2954 | static void _omap_dispc_initialize_irq(void) | ||
2955 | { | ||
2956 | unsigned long flags; | ||
2957 | |||
2958 | spin_lock_irqsave(&dispc.irq_lock, flags); | ||
2959 | |||
2960 | memset(dispc.registered_isr, 0, sizeof(dispc.registered_isr)); | ||
2961 | |||
2962 | dispc.irq_error_mask = DISPC_IRQ_MASK_ERROR; | ||
2963 | |||
2964 | /* there's SYNC_LOST_DIGIT waiting after enabling the DSS, | ||
2965 | * so clear it */ | ||
2966 | dispc_write_reg(DISPC_IRQSTATUS, dispc_read_reg(DISPC_IRQSTATUS)); | ||
2967 | |||
2968 | _omap_dispc_set_irqs(); | ||
2969 | |||
2970 | spin_unlock_irqrestore(&dispc.irq_lock, flags); | ||
2971 | } | ||
2972 | |||
2973 | void dispc_enable_sidle(void) | ||
2974 | { | ||
2975 | REG_FLD_MOD(DISPC_SYSCONFIG, 2, 4, 3); /* SIDLEMODE: smart idle */ | ||
2976 | } | ||
2977 | |||
2978 | void dispc_disable_sidle(void) | ||
2979 | { | ||
2980 | REG_FLD_MOD(DISPC_SYSCONFIG, 1, 4, 3); /* SIDLEMODE: no idle */ | ||
2981 | } | ||
2982 | |||
2983 | static void _omap_dispc_initial_config(void) | ||
2984 | { | ||
2985 | u32 l; | ||
2986 | |||
2987 | l = dispc_read_reg(DISPC_SYSCONFIG); | ||
2988 | l = FLD_MOD(l, 2, 13, 12); /* MIDLEMODE: smart standby */ | ||
2989 | l = FLD_MOD(l, 2, 4, 3); /* SIDLEMODE: smart idle */ | ||
2990 | l = FLD_MOD(l, 1, 2, 2); /* ENWAKEUP */ | ||
2991 | l = FLD_MOD(l, 1, 0, 0); /* AUTOIDLE */ | ||
2992 | dispc_write_reg(DISPC_SYSCONFIG, l); | ||
2993 | |||
2994 | /* FUNCGATED */ | ||
2995 | REG_FLD_MOD(DISPC_CONFIG, 1, 9, 9); | ||
2996 | |||
2997 | /* L3 firewall setting: enable access to OCM RAM */ | ||
2998 | /* XXX this should be somewhere in plat-omap */ | ||
2999 | if (cpu_is_omap24xx()) | ||
3000 | __raw_writel(0x402000b0, OMAP2_L3_IO_ADDRESS(0x680050a0)); | ||
3001 | |||
3002 | _dispc_setup_color_conv_coef(); | ||
3003 | |||
3004 | dispc_set_loadmode(OMAP_DSS_LOAD_FRAME_ONLY); | ||
3005 | |||
3006 | dispc_read_plane_fifo_sizes(); | ||
3007 | } | ||
3008 | |||
3009 | int dispc_init(void) | ||
3010 | { | ||
3011 | u32 rev; | ||
3012 | |||
3013 | spin_lock_init(&dispc.irq_lock); | ||
3014 | |||
3015 | INIT_WORK(&dispc.error_work, dispc_error_worker); | ||
3016 | |||
3017 | dispc.base = ioremap(DISPC_BASE, DISPC_SZ_REGS); | ||
3018 | if (!dispc.base) { | ||
3019 | DSSERR("can't ioremap DISPC\n"); | ||
3020 | return -ENOMEM; | ||
3021 | } | ||
3022 | |||
3023 | enable_clocks(1); | ||
3024 | |||
3025 | _omap_dispc_initial_config(); | ||
3026 | |||
3027 | _omap_dispc_initialize_irq(); | ||
3028 | |||
3029 | dispc_save_context(); | ||
3030 | |||
3031 | rev = dispc_read_reg(DISPC_REVISION); | ||
3032 | printk(KERN_INFO "OMAP DISPC rev %d.%d\n", | ||
3033 | FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0)); | ||
3034 | |||
3035 | enable_clocks(0); | ||
3036 | |||
3037 | return 0; | ||
3038 | } | ||
3039 | |||
3040 | void dispc_exit(void) | ||
3041 | { | ||
3042 | iounmap(dispc.base); | ||
3043 | } | ||
3044 | |||
3045 | int dispc_enable_plane(enum omap_plane plane, bool enable) | ||
3046 | { | ||
3047 | DSSDBG("dispc_enable_plane %d, %d\n", plane, enable); | ||
3048 | |||
3049 | enable_clocks(1); | ||
3050 | _dispc_enable_plane(plane, enable); | ||
3051 | enable_clocks(0); | ||
3052 | |||
3053 | return 0; | ||
3054 | } | ||
3055 | |||
3056 | int dispc_setup_plane(enum omap_plane plane, | ||
3057 | u32 paddr, u16 screen_width, | ||
3058 | u16 pos_x, u16 pos_y, | ||
3059 | u16 width, u16 height, | ||
3060 | u16 out_width, u16 out_height, | ||
3061 | enum omap_color_mode color_mode, | ||
3062 | bool ilace, | ||
3063 | enum omap_dss_rotation_type rotation_type, | ||
3064 | u8 rotation, bool mirror, u8 global_alpha) | ||
3065 | { | ||
3066 | int r = 0; | ||
3067 | |||
3068 | DSSDBG("dispc_setup_plane %d, pa %x, sw %d, %d,%d, %dx%d -> " | ||
3069 | "%dx%d, ilace %d, cmode %x, rot %d, mir %d\n", | ||
3070 | plane, paddr, screen_width, pos_x, pos_y, | ||
3071 | width, height, | ||
3072 | out_width, out_height, | ||
3073 | ilace, color_mode, | ||
3074 | rotation, mirror); | ||
3075 | |||
3076 | enable_clocks(1); | ||
3077 | |||
3078 | r = _dispc_setup_plane(plane, | ||
3079 | paddr, screen_width, | ||
3080 | pos_x, pos_y, | ||
3081 | width, height, | ||
3082 | out_width, out_height, | ||
3083 | color_mode, ilace, | ||
3084 | rotation_type, | ||
3085 | rotation, mirror, | ||
3086 | global_alpha); | ||
3087 | |||
3088 | enable_clocks(0); | ||
3089 | |||
3090 | return r; | ||
3091 | } | ||
diff --git a/drivers/video/omap2/dss/display.c b/drivers/video/omap2/dss/display.c new file mode 100644 index 000000000000..3b92b84b9560 --- /dev/null +++ b/drivers/video/omap2/dss/display.c | |||
@@ -0,0 +1,671 @@ | |||
1 | /* | ||
2 | * linux/drivers/video/omap2/dss/display.c | ||
3 | * | ||
4 | * Copyright (C) 2009 Nokia Corporation | ||
5 | * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> | ||
6 | * | ||
7 | * Some code and ideas taken from drivers/video/omap/ driver | ||
8 | * by Imre Deak. | ||
9 | * | ||
10 | * This program is free software; you can redistribute it and/or modify it | ||
11 | * under the terms of the GNU General Public License version 2 as published by | ||
12 | * the Free Software Foundation. | ||
13 | * | ||
14 | * This program is distributed in the hope that it will be useful, but WITHOUT | ||
15 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | ||
16 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for | ||
17 | * more details. | ||
18 | * | ||
19 | * You should have received a copy of the GNU General Public License along with | ||
20 | * this program. If not, see <http://www.gnu.org/licenses/>. | ||
21 | */ | ||
22 | |||
23 | #define DSS_SUBSYS_NAME "DISPLAY" | ||
24 | |||
25 | #include <linux/kernel.h> | ||
26 | #include <linux/module.h> | ||
27 | #include <linux/jiffies.h> | ||
28 | #include <linux/list.h> | ||
29 | #include <linux/platform_device.h> | ||
30 | |||
31 | #include <plat/display.h> | ||
32 | #include "dss.h" | ||
33 | |||
34 | static LIST_HEAD(display_list); | ||
35 | |||
36 | static ssize_t display_enabled_show(struct device *dev, | ||
37 | struct device_attribute *attr, char *buf) | ||
38 | { | ||
39 | struct omap_dss_device *dssdev = to_dss_device(dev); | ||
40 | bool enabled = dssdev->state != OMAP_DSS_DISPLAY_DISABLED; | ||
41 | |||
42 | return snprintf(buf, PAGE_SIZE, "%d\n", enabled); | ||
43 | } | ||
44 | |||
45 | static ssize_t display_enabled_store(struct device *dev, | ||
46 | struct device_attribute *attr, | ||
47 | const char *buf, size_t size) | ||
48 | { | ||
49 | struct omap_dss_device *dssdev = to_dss_device(dev); | ||
50 | bool enabled, r; | ||
51 | |||
52 | enabled = simple_strtoul(buf, NULL, 10); | ||
53 | |||
54 | if (enabled != (dssdev->state != OMAP_DSS_DISPLAY_DISABLED)) { | ||
55 | if (enabled) { | ||
56 | r = dssdev->enable(dssdev); | ||
57 | if (r) | ||
58 | return r; | ||
59 | } else { | ||
60 | dssdev->disable(dssdev); | ||
61 | } | ||
62 | } | ||
63 | |||
64 | return size; | ||
65 | } | ||
66 | |||
67 | static ssize_t display_upd_mode_show(struct device *dev, | ||
68 | struct device_attribute *attr, char *buf) | ||
69 | { | ||
70 | struct omap_dss_device *dssdev = to_dss_device(dev); | ||
71 | enum omap_dss_update_mode mode = OMAP_DSS_UPDATE_AUTO; | ||
72 | if (dssdev->get_update_mode) | ||
73 | mode = dssdev->get_update_mode(dssdev); | ||
74 | return snprintf(buf, PAGE_SIZE, "%d\n", mode); | ||
75 | } | ||
76 | |||
77 | static ssize_t display_upd_mode_store(struct device *dev, | ||
78 | struct device_attribute *attr, | ||
79 | const char *buf, size_t size) | ||
80 | { | ||
81 | struct omap_dss_device *dssdev = to_dss_device(dev); | ||
82 | int val, r; | ||
83 | enum omap_dss_update_mode mode; | ||
84 | |||
85 | val = simple_strtoul(buf, NULL, 10); | ||
86 | |||
87 | switch (val) { | ||
88 | case OMAP_DSS_UPDATE_DISABLED: | ||
89 | case OMAP_DSS_UPDATE_AUTO: | ||
90 | case OMAP_DSS_UPDATE_MANUAL: | ||
91 | mode = (enum omap_dss_update_mode)val; | ||
92 | break; | ||
93 | default: | ||
94 | return -EINVAL; | ||
95 | } | ||
96 | |||
97 | r = dssdev->set_update_mode(dssdev, mode); | ||
98 | if (r) | ||
99 | return r; | ||
100 | |||
101 | return size; | ||
102 | } | ||
103 | |||
104 | static ssize_t display_tear_show(struct device *dev, | ||
105 | struct device_attribute *attr, char *buf) | ||
106 | { | ||
107 | struct omap_dss_device *dssdev = to_dss_device(dev); | ||
108 | return snprintf(buf, PAGE_SIZE, "%d\n", | ||
109 | dssdev->get_te ? dssdev->get_te(dssdev) : 0); | ||
110 | } | ||
111 | |||
112 | static ssize_t display_tear_store(struct device *dev, | ||
113 | struct device_attribute *attr, const char *buf, size_t size) | ||
114 | { | ||
115 | struct omap_dss_device *dssdev = to_dss_device(dev); | ||
116 | unsigned long te; | ||
117 | int r; | ||
118 | |||
119 | if (!dssdev->enable_te || !dssdev->get_te) | ||
120 | return -ENOENT; | ||
121 | |||
122 | te = simple_strtoul(buf, NULL, 0); | ||
123 | |||
124 | r = dssdev->enable_te(dssdev, te); | ||
125 | if (r) | ||
126 | return r; | ||
127 | |||
128 | return size; | ||
129 | } | ||
130 | |||
131 | static ssize_t display_timings_show(struct device *dev, | ||
132 | struct device_attribute *attr, char *buf) | ||
133 | { | ||
134 | struct omap_dss_device *dssdev = to_dss_device(dev); | ||
135 | struct omap_video_timings t; | ||
136 | |||
137 | if (!dssdev->get_timings) | ||
138 | return -ENOENT; | ||
139 | |||
140 | dssdev->get_timings(dssdev, &t); | ||
141 | |||
142 | return snprintf(buf, PAGE_SIZE, "%u,%u/%u/%u/%u,%u/%u/%u/%u\n", | ||
143 | t.pixel_clock, | ||
144 | t.x_res, t.hfp, t.hbp, t.hsw, | ||
145 | t.y_res, t.vfp, t.vbp, t.vsw); | ||
146 | } | ||
147 | |||
148 | static ssize_t display_timings_store(struct device *dev, | ||
149 | struct device_attribute *attr, const char *buf, size_t size) | ||
150 | { | ||
151 | struct omap_dss_device *dssdev = to_dss_device(dev); | ||
152 | struct omap_video_timings t; | ||
153 | int r, found; | ||
154 | |||
155 | if (!dssdev->set_timings || !dssdev->check_timings) | ||
156 | return -ENOENT; | ||
157 | |||
158 | found = 0; | ||
159 | #ifdef CONFIG_OMAP2_DSS_VENC | ||
160 | if (strncmp("pal", buf, 3) == 0) { | ||
161 | t = omap_dss_pal_timings; | ||
162 | found = 1; | ||
163 | } else if (strncmp("ntsc", buf, 4) == 0) { | ||
164 | t = omap_dss_ntsc_timings; | ||
165 | found = 1; | ||
166 | } | ||
167 | #endif | ||
168 | if (!found && sscanf(buf, "%u,%hu/%hu/%hu/%hu,%hu/%hu/%hu/%hu", | ||
169 | &t.pixel_clock, | ||
170 | &t.x_res, &t.hfp, &t.hbp, &t.hsw, | ||
171 | &t.y_res, &t.vfp, &t.vbp, &t.vsw) != 9) | ||
172 | return -EINVAL; | ||
173 | |||
174 | r = dssdev->check_timings(dssdev, &t); | ||
175 | if (r) | ||
176 | return r; | ||
177 | |||
178 | dssdev->set_timings(dssdev, &t); | ||
179 | |||
180 | return size; | ||
181 | } | ||
182 | |||
183 | static ssize_t display_rotate_show(struct device *dev, | ||
184 | struct device_attribute *attr, char *buf) | ||
185 | { | ||
186 | struct omap_dss_device *dssdev = to_dss_device(dev); | ||
187 | int rotate; | ||
188 | if (!dssdev->get_rotate) | ||
189 | return -ENOENT; | ||
190 | rotate = dssdev->get_rotate(dssdev); | ||
191 | return snprintf(buf, PAGE_SIZE, "%u\n", rotate); | ||
192 | } | ||
193 | |||
194 | static ssize_t display_rotate_store(struct device *dev, | ||
195 | struct device_attribute *attr, const char *buf, size_t size) | ||
196 | { | ||
197 | struct omap_dss_device *dssdev = to_dss_device(dev); | ||
198 | unsigned long rot; | ||
199 | int r; | ||
200 | |||
201 | if (!dssdev->set_rotate || !dssdev->get_rotate) | ||
202 | return -ENOENT; | ||
203 | |||
204 | rot = simple_strtoul(buf, NULL, 0); | ||
205 | |||
206 | r = dssdev->set_rotate(dssdev, rot); | ||
207 | if (r) | ||
208 | return r; | ||
209 | |||
210 | return size; | ||
211 | } | ||
212 | |||
213 | static ssize_t display_mirror_show(struct device *dev, | ||
214 | struct device_attribute *attr, char *buf) | ||
215 | { | ||
216 | struct omap_dss_device *dssdev = to_dss_device(dev); | ||
217 | int mirror; | ||
218 | if (!dssdev->get_mirror) | ||
219 | return -ENOENT; | ||
220 | mirror = dssdev->get_mirror(dssdev); | ||
221 | return snprintf(buf, PAGE_SIZE, "%u\n", mirror); | ||
222 | } | ||
223 | |||
224 | static ssize_t display_mirror_store(struct device *dev, | ||
225 | struct device_attribute *attr, const char *buf, size_t size) | ||
226 | { | ||
227 | struct omap_dss_device *dssdev = to_dss_device(dev); | ||
228 | unsigned long mirror; | ||
229 | int r; | ||
230 | |||
231 | if (!dssdev->set_mirror || !dssdev->get_mirror) | ||
232 | return -ENOENT; | ||
233 | |||
234 | mirror = simple_strtoul(buf, NULL, 0); | ||
235 | |||
236 | r = dssdev->set_mirror(dssdev, mirror); | ||
237 | if (r) | ||
238 | return r; | ||
239 | |||
240 | return size; | ||
241 | } | ||
242 | |||
243 | static ssize_t display_wss_show(struct device *dev, | ||
244 | struct device_attribute *attr, char *buf) | ||
245 | { | ||
246 | struct omap_dss_device *dssdev = to_dss_device(dev); | ||
247 | unsigned int wss; | ||
248 | |||
249 | if (!dssdev->get_wss) | ||
250 | return -ENOENT; | ||
251 | |||
252 | wss = dssdev->get_wss(dssdev); | ||
253 | |||
254 | return snprintf(buf, PAGE_SIZE, "0x%05x\n", wss); | ||
255 | } | ||
256 | |||
257 | static ssize_t display_wss_store(struct device *dev, | ||
258 | struct device_attribute *attr, const char *buf, size_t size) | ||
259 | { | ||
260 | struct omap_dss_device *dssdev = to_dss_device(dev); | ||
261 | unsigned long wss; | ||
262 | int r; | ||
263 | |||
264 | if (!dssdev->get_wss || !dssdev->set_wss) | ||
265 | return -ENOENT; | ||
266 | |||
267 | if (strict_strtoul(buf, 0, &wss)) | ||
268 | return -EINVAL; | ||
269 | |||
270 | if (wss > 0xfffff) | ||
271 | return -EINVAL; | ||
272 | |||
273 | r = dssdev->set_wss(dssdev, wss); | ||
274 | if (r) | ||
275 | return r; | ||
276 | |||
277 | return size; | ||
278 | } | ||
279 | |||
280 | static DEVICE_ATTR(enabled, S_IRUGO|S_IWUSR, | ||
281 | display_enabled_show, display_enabled_store); | ||
282 | static DEVICE_ATTR(update_mode, S_IRUGO|S_IWUSR, | ||
283 | display_upd_mode_show, display_upd_mode_store); | ||
284 | static DEVICE_ATTR(tear_elim, S_IRUGO|S_IWUSR, | ||
285 | display_tear_show, display_tear_store); | ||
286 | static DEVICE_ATTR(timings, S_IRUGO|S_IWUSR, | ||
287 | display_timings_show, display_timings_store); | ||
288 | static DEVICE_ATTR(rotate, S_IRUGO|S_IWUSR, | ||
289 | display_rotate_show, display_rotate_store); | ||
290 | static DEVICE_ATTR(mirror, S_IRUGO|S_IWUSR, | ||
291 | display_mirror_show, display_mirror_store); | ||
292 | static DEVICE_ATTR(wss, S_IRUGO|S_IWUSR, | ||
293 | display_wss_show, display_wss_store); | ||
294 | |||
295 | static struct device_attribute *display_sysfs_attrs[] = { | ||
296 | &dev_attr_enabled, | ||
297 | &dev_attr_update_mode, | ||
298 | &dev_attr_tear_elim, | ||
299 | &dev_attr_timings, | ||
300 | &dev_attr_rotate, | ||
301 | &dev_attr_mirror, | ||
302 | &dev_attr_wss, | ||
303 | NULL | ||
304 | }; | ||
305 | |||
306 | static void default_get_resolution(struct omap_dss_device *dssdev, | ||
307 | u16 *xres, u16 *yres) | ||
308 | { | ||
309 | *xres = dssdev->panel.timings.x_res; | ||
310 | *yres = dssdev->panel.timings.y_res; | ||
311 | } | ||
312 | |||
313 | void default_get_overlay_fifo_thresholds(enum omap_plane plane, | ||
314 | u32 fifo_size, enum omap_burst_size *burst_size, | ||
315 | u32 *fifo_low, u32 *fifo_high) | ||
316 | { | ||
317 | unsigned burst_size_bytes; | ||
318 | |||
319 | *burst_size = OMAP_DSS_BURST_16x32; | ||
320 | burst_size_bytes = 16 * 32 / 8; | ||
321 | |||
322 | *fifo_high = fifo_size - 1; | ||
323 | *fifo_low = fifo_size - burst_size_bytes; | ||
324 | } | ||
325 | |||
326 | static int default_wait_vsync(struct omap_dss_device *dssdev) | ||
327 | { | ||
328 | unsigned long timeout = msecs_to_jiffies(500); | ||
329 | u32 irq; | ||
330 | |||
331 | if (dssdev->type == OMAP_DISPLAY_TYPE_VENC) | ||
332 | irq = DISPC_IRQ_EVSYNC_ODD; | ||
333 | else | ||
334 | irq = DISPC_IRQ_VSYNC; | ||
335 | |||
336 | return omap_dispc_wait_for_irq_interruptible_timeout(irq, timeout); | ||
337 | } | ||
338 | |||
339 | static int default_get_recommended_bpp(struct omap_dss_device *dssdev) | ||
340 | { | ||
341 | if (dssdev->panel.recommended_bpp) | ||
342 | return dssdev->panel.recommended_bpp; | ||
343 | |||
344 | switch (dssdev->type) { | ||
345 | case OMAP_DISPLAY_TYPE_DPI: | ||
346 | if (dssdev->phy.dpi.data_lines == 24) | ||
347 | return 24; | ||
348 | else | ||
349 | return 16; | ||
350 | |||
351 | case OMAP_DISPLAY_TYPE_DBI: | ||
352 | case OMAP_DISPLAY_TYPE_DSI: | ||
353 | if (dssdev->ctrl.pixel_size == 24) | ||
354 | return 24; | ||
355 | else | ||
356 | return 16; | ||
357 | case OMAP_DISPLAY_TYPE_VENC: | ||
358 | case OMAP_DISPLAY_TYPE_SDI: | ||
359 | return 24; | ||
360 | return 24; | ||
361 | default: | ||
362 | BUG(); | ||
363 | } | ||
364 | } | ||
365 | |||
366 | /* Checks if replication logic should be used. Only use for active matrix, | ||
367 | * when overlay is in RGB12U or RGB16 mode, and LCD interface is | ||
368 | * 18bpp or 24bpp */ | ||
369 | bool dss_use_replication(struct omap_dss_device *dssdev, | ||
370 | enum omap_color_mode mode) | ||
371 | { | ||
372 | int bpp; | ||
373 | |||
374 | if (mode != OMAP_DSS_COLOR_RGB12U && mode != OMAP_DSS_COLOR_RGB16) | ||
375 | return false; | ||
376 | |||
377 | if (dssdev->type == OMAP_DISPLAY_TYPE_DPI && | ||
378 | (dssdev->panel.config & OMAP_DSS_LCD_TFT) == 0) | ||
379 | return false; | ||
380 | |||
381 | switch (dssdev->type) { | ||
382 | case OMAP_DISPLAY_TYPE_DPI: | ||
383 | bpp = dssdev->phy.dpi.data_lines; | ||
384 | break; | ||
385 | case OMAP_DISPLAY_TYPE_VENC: | ||
386 | case OMAP_DISPLAY_TYPE_SDI: | ||
387 | bpp = 24; | ||
388 | break; | ||
389 | case OMAP_DISPLAY_TYPE_DBI: | ||
390 | case OMAP_DISPLAY_TYPE_DSI: | ||
391 | bpp = dssdev->ctrl.pixel_size; | ||
392 | break; | ||
393 | default: | ||
394 | BUG(); | ||
395 | } | ||
396 | |||
397 | return bpp > 16; | ||
398 | } | ||
399 | |||
400 | void dss_init_device(struct platform_device *pdev, | ||
401 | struct omap_dss_device *dssdev) | ||
402 | { | ||
403 | struct device_attribute *attr; | ||
404 | int i; | ||
405 | int r; | ||
406 | |||
407 | switch (dssdev->type) { | ||
408 | case OMAP_DISPLAY_TYPE_DPI: | ||
409 | #ifdef CONFIG_OMAP2_DSS_RFBI | ||
410 | case OMAP_DISPLAY_TYPE_DBI: | ||
411 | #endif | ||
412 | #ifdef CONFIG_OMAP2_DSS_SDI | ||
413 | case OMAP_DISPLAY_TYPE_SDI: | ||
414 | #endif | ||
415 | #ifdef CONFIG_OMAP2_DSS_DSI | ||
416 | case OMAP_DISPLAY_TYPE_DSI: | ||
417 | #endif | ||
418 | #ifdef CONFIG_OMAP2_DSS_VENC | ||
419 | case OMAP_DISPLAY_TYPE_VENC: | ||
420 | #endif | ||
421 | break; | ||
422 | default: | ||
423 | DSSERR("Support for display '%s' not compiled in.\n", | ||
424 | dssdev->name); | ||
425 | return; | ||
426 | } | ||
427 | |||
428 | dssdev->get_resolution = default_get_resolution; | ||
429 | dssdev->get_recommended_bpp = default_get_recommended_bpp; | ||
430 | dssdev->wait_vsync = default_wait_vsync; | ||
431 | |||
432 | switch (dssdev->type) { | ||
433 | case OMAP_DISPLAY_TYPE_DPI: | ||
434 | r = dpi_init_display(dssdev); | ||
435 | break; | ||
436 | #ifdef CONFIG_OMAP2_DSS_RFBI | ||
437 | case OMAP_DISPLAY_TYPE_DBI: | ||
438 | r = rfbi_init_display(dssdev); | ||
439 | break; | ||
440 | #endif | ||
441 | #ifdef CONFIG_OMAP2_DSS_VENC | ||
442 | case OMAP_DISPLAY_TYPE_VENC: | ||
443 | r = venc_init_display(dssdev); | ||
444 | break; | ||
445 | #endif | ||
446 | #ifdef CONFIG_OMAP2_DSS_SDI | ||
447 | case OMAP_DISPLAY_TYPE_SDI: | ||
448 | r = sdi_init_display(dssdev); | ||
449 | break; | ||
450 | #endif | ||
451 | #ifdef CONFIG_OMAP2_DSS_DSI | ||
452 | case OMAP_DISPLAY_TYPE_DSI: | ||
453 | r = dsi_init_display(dssdev); | ||
454 | break; | ||
455 | #endif | ||
456 | default: | ||
457 | BUG(); | ||
458 | } | ||
459 | |||
460 | if (r) { | ||
461 | DSSERR("failed to init display %s\n", dssdev->name); | ||
462 | return; | ||
463 | } | ||
464 | |||
465 | /* create device sysfs files */ | ||
466 | i = 0; | ||
467 | while ((attr = display_sysfs_attrs[i++]) != NULL) { | ||
468 | r = device_create_file(&dssdev->dev, attr); | ||
469 | if (r) | ||
470 | DSSERR("failed to create sysfs file\n"); | ||
471 | } | ||
472 | |||
473 | /* create display? sysfs links */ | ||
474 | r = sysfs_create_link(&pdev->dev.kobj, &dssdev->dev.kobj, | ||
475 | dev_name(&dssdev->dev)); | ||
476 | if (r) | ||
477 | DSSERR("failed to create sysfs display link\n"); | ||
478 | } | ||
479 | |||
480 | void dss_uninit_device(struct platform_device *pdev, | ||
481 | struct omap_dss_device *dssdev) | ||
482 | { | ||
483 | struct device_attribute *attr; | ||
484 | int i = 0; | ||
485 | |||
486 | sysfs_remove_link(&pdev->dev.kobj, dev_name(&dssdev->dev)); | ||
487 | |||
488 | while ((attr = display_sysfs_attrs[i++]) != NULL) | ||
489 | device_remove_file(&dssdev->dev, attr); | ||
490 | |||
491 | if (dssdev->manager) | ||
492 | dssdev->manager->unset_device(dssdev->manager); | ||
493 | } | ||
494 | |||
495 | static int dss_suspend_device(struct device *dev, void *data) | ||
496 | { | ||
497 | int r; | ||
498 | struct omap_dss_device *dssdev = to_dss_device(dev); | ||
499 | |||
500 | if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE) { | ||
501 | dssdev->activate_after_resume = false; | ||
502 | return 0; | ||
503 | } | ||
504 | |||
505 | if (!dssdev->suspend) { | ||
506 | DSSERR("display '%s' doesn't implement suspend\n", | ||
507 | dssdev->name); | ||
508 | return -ENOSYS; | ||
509 | } | ||
510 | |||
511 | r = dssdev->suspend(dssdev); | ||
512 | if (r) | ||
513 | return r; | ||
514 | |||
515 | dssdev->activate_after_resume = true; | ||
516 | |||
517 | return 0; | ||
518 | } | ||
519 | |||
520 | int dss_suspend_all_devices(void) | ||
521 | { | ||
522 | int r; | ||
523 | struct bus_type *bus = dss_get_bus(); | ||
524 | |||
525 | r = bus_for_each_dev(bus, NULL, NULL, dss_suspend_device); | ||
526 | if (r) { | ||
527 | /* resume all displays that were suspended */ | ||
528 | dss_resume_all_devices(); | ||
529 | return r; | ||
530 | } | ||
531 | |||
532 | return 0; | ||
533 | } | ||
534 | |||
535 | static int dss_resume_device(struct device *dev, void *data) | ||
536 | { | ||
537 | int r; | ||
538 | struct omap_dss_device *dssdev = to_dss_device(dev); | ||
539 | |||
540 | if (dssdev->activate_after_resume && dssdev->resume) { | ||
541 | r = dssdev->resume(dssdev); | ||
542 | if (r) | ||
543 | return r; | ||
544 | } | ||
545 | |||
546 | dssdev->activate_after_resume = false; | ||
547 | |||
548 | return 0; | ||
549 | } | ||
550 | |||
551 | int dss_resume_all_devices(void) | ||
552 | { | ||
553 | struct bus_type *bus = dss_get_bus(); | ||
554 | |||
555 | return bus_for_each_dev(bus, NULL, NULL, dss_resume_device); | ||
556 | } | ||
557 | |||
558 | static int dss_disable_device(struct device *dev, void *data) | ||
559 | { | ||
560 | struct omap_dss_device *dssdev = to_dss_device(dev); | ||
561 | dssdev->disable(dssdev); | ||
562 | return 0; | ||
563 | } | ||
564 | |||
565 | void dss_disable_all_devices(void) | ||
566 | { | ||
567 | struct bus_type *bus = dss_get_bus(); | ||
568 | bus_for_each_dev(bus, NULL, NULL, dss_disable_device); | ||
569 | } | ||
570 | |||
571 | |||
572 | void omap_dss_get_device(struct omap_dss_device *dssdev) | ||
573 | { | ||
574 | get_device(&dssdev->dev); | ||
575 | } | ||
576 | EXPORT_SYMBOL(omap_dss_get_device); | ||
577 | |||
578 | void omap_dss_put_device(struct omap_dss_device *dssdev) | ||
579 | { | ||
580 | put_device(&dssdev->dev); | ||
581 | } | ||
582 | EXPORT_SYMBOL(omap_dss_put_device); | ||
583 | |||
584 | /* ref count of the found device is incremented. ref count | ||
585 | * of from-device is decremented. */ | ||
586 | struct omap_dss_device *omap_dss_get_next_device(struct omap_dss_device *from) | ||
587 | { | ||
588 | struct device *dev; | ||
589 | struct device *dev_start = NULL; | ||
590 | struct omap_dss_device *dssdev = NULL; | ||
591 | |||
592 | int match(struct device *dev, void *data) | ||
593 | { | ||
594 | /* skip panels connected to controllers */ | ||
595 | if (to_dss_device(dev)->panel.ctrl) | ||
596 | return 0; | ||
597 | |||
598 | return 1; | ||
599 | } | ||
600 | |||
601 | if (from) | ||
602 | dev_start = &from->dev; | ||
603 | dev = bus_find_device(dss_get_bus(), dev_start, NULL, match); | ||
604 | if (dev) | ||
605 | dssdev = to_dss_device(dev); | ||
606 | if (from) | ||
607 | put_device(&from->dev); | ||
608 | |||
609 | return dssdev; | ||
610 | } | ||
611 | EXPORT_SYMBOL(omap_dss_get_next_device); | ||
612 | |||
613 | struct omap_dss_device *omap_dss_find_device(void *data, | ||
614 | int (*match)(struct omap_dss_device *dssdev, void *data)) | ||
615 | { | ||
616 | struct omap_dss_device *dssdev = NULL; | ||
617 | |||
618 | while ((dssdev = omap_dss_get_next_device(dssdev)) != NULL) { | ||
619 | if (match(dssdev, data)) | ||
620 | return dssdev; | ||
621 | } | ||
622 | |||
623 | return NULL; | ||
624 | } | ||
625 | EXPORT_SYMBOL(omap_dss_find_device); | ||
626 | |||
627 | int omap_dss_start_device(struct omap_dss_device *dssdev) | ||
628 | { | ||
629 | int r; | ||
630 | |||
631 | if (!dssdev->driver) { | ||
632 | DSSDBG("no driver\n"); | ||
633 | r = -ENODEV; | ||
634 | goto err0; | ||
635 | } | ||
636 | |||
637 | if (dssdev->ctrl.panel && !dssdev->ctrl.panel->driver) { | ||
638 | DSSDBG("no panel driver\n"); | ||
639 | r = -ENODEV; | ||
640 | goto err0; | ||
641 | } | ||
642 | |||
643 | if (!try_module_get(dssdev->dev.driver->owner)) { | ||
644 | r = -ENODEV; | ||
645 | goto err0; | ||
646 | } | ||
647 | |||
648 | if (dssdev->ctrl.panel) { | ||
649 | if (!try_module_get(dssdev->ctrl.panel->dev.driver->owner)) { | ||
650 | r = -ENODEV; | ||
651 | goto err1; | ||
652 | } | ||
653 | } | ||
654 | |||
655 | return 0; | ||
656 | err1: | ||
657 | module_put(dssdev->dev.driver->owner); | ||
658 | err0: | ||
659 | return r; | ||
660 | } | ||
661 | EXPORT_SYMBOL(omap_dss_start_device); | ||
662 | |||
663 | void omap_dss_stop_device(struct omap_dss_device *dssdev) | ||
664 | { | ||
665 | if (dssdev->ctrl.panel) | ||
666 | module_put(dssdev->ctrl.panel->dev.driver->owner); | ||
667 | |||
668 | module_put(dssdev->dev.driver->owner); | ||
669 | } | ||
670 | EXPORT_SYMBOL(omap_dss_stop_device); | ||
671 | |||
diff --git a/drivers/video/omap2/dss/dpi.c b/drivers/video/omap2/dss/dpi.c new file mode 100644 index 000000000000..2d71031baa25 --- /dev/null +++ b/drivers/video/omap2/dss/dpi.c | |||
@@ -0,0 +1,399 @@ | |||
1 | /* | ||
2 | * linux/drivers/video/omap2/dss/dpi.c | ||
3 | * | ||
4 | * Copyright (C) 2009 Nokia Corporation | ||
5 | * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> | ||
6 | * | ||
7 | * Some code and ideas taken from drivers/video/omap/ driver | ||
8 | * by Imre Deak. | ||
9 | * | ||
10 | * This program is free software; you can redistribute it and/or modify it | ||
11 | * under the terms of the GNU General Public License version 2 as published by | ||
12 | * the Free Software Foundation. | ||
13 | * | ||
14 | * This program is distributed in the hope that it will be useful, but WITHOUT | ||
15 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | ||
16 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for | ||
17 | * more details. | ||
18 | * | ||
19 | * You should have received a copy of the GNU General Public License along with | ||
20 | * this program. If not, see <http://www.gnu.org/licenses/>. | ||
21 | */ | ||
22 | |||
23 | #define DSS_SUBSYS_NAME "DPI" | ||
24 | |||
25 | #include <linux/kernel.h> | ||
26 | #include <linux/clk.h> | ||
27 | #include <linux/delay.h> | ||
28 | #include <linux/errno.h> | ||
29 | |||
30 | #include <plat/display.h> | ||
31 | #include <plat/cpu.h> | ||
32 | |||
33 | #include "dss.h" | ||
34 | |||
35 | static struct { | ||
36 | int update_enabled; | ||
37 | } dpi; | ||
38 | |||
39 | #ifdef CONFIG_OMAP2_DSS_USE_DSI_PLL | ||
40 | static int dpi_set_dsi_clk(bool is_tft, unsigned long pck_req, | ||
41 | unsigned long *fck, int *lck_div, int *pck_div) | ||
42 | { | ||
43 | struct dsi_clock_info dsi_cinfo; | ||
44 | struct dispc_clock_info dispc_cinfo; | ||
45 | int r; | ||
46 | |||
47 | r = dsi_pll_calc_clock_div_pck(is_tft, pck_req, &dsi_cinfo, | ||
48 | &dispc_cinfo); | ||
49 | if (r) | ||
50 | return r; | ||
51 | |||
52 | r = dsi_pll_set_clock_div(&dsi_cinfo); | ||
53 | if (r) | ||
54 | return r; | ||
55 | |||
56 | dss_select_clk_source(0, 1); | ||
57 | |||
58 | r = dispc_set_clock_div(&dispc_cinfo); | ||
59 | if (r) | ||
60 | return r; | ||
61 | |||
62 | *fck = dsi_cinfo.dsi1_pll_fclk; | ||
63 | *lck_div = dispc_cinfo.lck_div; | ||
64 | *pck_div = dispc_cinfo.pck_div; | ||
65 | |||
66 | return 0; | ||
67 | } | ||
68 | #else | ||
69 | static int dpi_set_dispc_clk(bool is_tft, unsigned long pck_req, | ||
70 | unsigned long *fck, int *lck_div, int *pck_div) | ||
71 | { | ||
72 | struct dss_clock_info dss_cinfo; | ||
73 | struct dispc_clock_info dispc_cinfo; | ||
74 | int r; | ||
75 | |||
76 | r = dss_calc_clock_div(is_tft, pck_req, &dss_cinfo, &dispc_cinfo); | ||
77 | if (r) | ||
78 | return r; | ||
79 | |||
80 | r = dss_set_clock_div(&dss_cinfo); | ||
81 | if (r) | ||
82 | return r; | ||
83 | |||
84 | r = dispc_set_clock_div(&dispc_cinfo); | ||
85 | if (r) | ||
86 | return r; | ||
87 | |||
88 | *fck = dss_cinfo.fck; | ||
89 | *lck_div = dispc_cinfo.lck_div; | ||
90 | *pck_div = dispc_cinfo.pck_div; | ||
91 | |||
92 | return 0; | ||
93 | } | ||
94 | #endif | ||
95 | |||
96 | static int dpi_set_mode(struct omap_dss_device *dssdev) | ||
97 | { | ||
98 | struct omap_video_timings *t = &dssdev->panel.timings; | ||
99 | int lck_div, pck_div; | ||
100 | unsigned long fck; | ||
101 | unsigned long pck; | ||
102 | bool is_tft; | ||
103 | int r = 0; | ||
104 | |||
105 | dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); | ||
106 | |||
107 | dispc_set_pol_freq(dssdev->panel.config, dssdev->panel.acbi, | ||
108 | dssdev->panel.acb); | ||
109 | |||
110 | is_tft = (dssdev->panel.config & OMAP_DSS_LCD_TFT) != 0; | ||
111 | |||
112 | #ifdef CONFIG_OMAP2_DSS_USE_DSI_PLL | ||
113 | r = dpi_set_dsi_clk(is_tft, t->pixel_clock * 1000, | ||
114 | &fck, &lck_div, &pck_div); | ||
115 | #else | ||
116 | r = dpi_set_dispc_clk(is_tft, t->pixel_clock * 1000, | ||
117 | &fck, &lck_div, &pck_div); | ||
118 | #endif | ||
119 | if (r) | ||
120 | goto err0; | ||
121 | |||
122 | pck = fck / lck_div / pck_div / 1000; | ||
123 | |||
124 | if (pck != t->pixel_clock) { | ||
125 | DSSWARN("Could not find exact pixel clock. " | ||
126 | "Requested %d kHz, got %lu kHz\n", | ||
127 | t->pixel_clock, pck); | ||
128 | |||
129 | t->pixel_clock = pck; | ||
130 | } | ||
131 | |||
132 | dispc_set_lcd_timings(t); | ||
133 | |||
134 | err0: | ||
135 | dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); | ||
136 | return r; | ||
137 | } | ||
138 | |||
139 | static int dpi_basic_init(struct omap_dss_device *dssdev) | ||
140 | { | ||
141 | bool is_tft; | ||
142 | |||
143 | is_tft = (dssdev->panel.config & OMAP_DSS_LCD_TFT) != 0; | ||
144 | |||
145 | dispc_set_parallel_interface_mode(OMAP_DSS_PARALLELMODE_BYPASS); | ||
146 | dispc_set_lcd_display_type(is_tft ? OMAP_DSS_LCD_DISPLAY_TFT : | ||
147 | OMAP_DSS_LCD_DISPLAY_STN); | ||
148 | dispc_set_tft_data_lines(dssdev->phy.dpi.data_lines); | ||
149 | |||
150 | return 0; | ||
151 | } | ||
152 | |||
153 | static int dpi_display_enable(struct omap_dss_device *dssdev) | ||
154 | { | ||
155 | int r; | ||
156 | |||
157 | r = omap_dss_start_device(dssdev); | ||
158 | if (r) { | ||
159 | DSSERR("failed to start device\n"); | ||
160 | goto err0; | ||
161 | } | ||
162 | |||
163 | if (dssdev->state != OMAP_DSS_DISPLAY_DISABLED) { | ||
164 | DSSERR("display already enabled\n"); | ||
165 | r = -EINVAL; | ||
166 | goto err1; | ||
167 | } | ||
168 | |||
169 | dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); | ||
170 | |||
171 | r = dpi_basic_init(dssdev); | ||
172 | if (r) | ||
173 | goto err2; | ||
174 | |||
175 | #ifdef CONFIG_OMAP2_DSS_USE_DSI_PLL | ||
176 | dss_clk_enable(DSS_CLK_FCK2); | ||
177 | r = dsi_pll_init(dssdev, 0, 1); | ||
178 | if (r) | ||
179 | goto err3; | ||
180 | #endif | ||
181 | r = dpi_set_mode(dssdev); | ||
182 | if (r) | ||
183 | goto err4; | ||
184 | |||
185 | mdelay(2); | ||
186 | |||
187 | dispc_enable_lcd_out(1); | ||
188 | |||
189 | r = dssdev->driver->enable(dssdev); | ||
190 | if (r) | ||
191 | goto err5; | ||
192 | |||
193 | dssdev->state = OMAP_DSS_DISPLAY_ACTIVE; | ||
194 | |||
195 | return 0; | ||
196 | |||
197 | err5: | ||
198 | dispc_enable_lcd_out(0); | ||
199 | err4: | ||
200 | #ifdef CONFIG_OMAP2_DSS_USE_DSI_PLL | ||
201 | dsi_pll_uninit(); | ||
202 | err3: | ||
203 | dss_clk_disable(DSS_CLK_FCK2); | ||
204 | #endif | ||
205 | err2: | ||
206 | dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); | ||
207 | err1: | ||
208 | omap_dss_stop_device(dssdev); | ||
209 | err0: | ||
210 | return r; | ||
211 | } | ||
212 | |||
213 | static int dpi_display_resume(struct omap_dss_device *dssdev); | ||
214 | |||
215 | static void dpi_display_disable(struct omap_dss_device *dssdev) | ||
216 | { | ||
217 | if (dssdev->state == OMAP_DSS_DISPLAY_DISABLED) | ||
218 | return; | ||
219 | |||
220 | if (dssdev->state == OMAP_DSS_DISPLAY_SUSPENDED) | ||
221 | dpi_display_resume(dssdev); | ||
222 | |||
223 | dssdev->driver->disable(dssdev); | ||
224 | |||
225 | dispc_enable_lcd_out(0); | ||
226 | |||
227 | #ifdef CONFIG_OMAP2_DSS_USE_DSI_PLL | ||
228 | dss_select_clk_source(0, 0); | ||
229 | dsi_pll_uninit(); | ||
230 | dss_clk_disable(DSS_CLK_FCK2); | ||
231 | #endif | ||
232 | |||
233 | dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); | ||
234 | |||
235 | dssdev->state = OMAP_DSS_DISPLAY_DISABLED; | ||
236 | |||
237 | omap_dss_stop_device(dssdev); | ||
238 | } | ||
239 | |||
240 | static int dpi_display_suspend(struct omap_dss_device *dssdev) | ||
241 | { | ||
242 | if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE) | ||
243 | return -EINVAL; | ||
244 | |||
245 | DSSDBG("dpi_display_suspend\n"); | ||
246 | |||
247 | if (dssdev->driver->suspend) | ||
248 | dssdev->driver->suspend(dssdev); | ||
249 | |||
250 | dispc_enable_lcd_out(0); | ||
251 | |||
252 | dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); | ||
253 | |||
254 | dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED; | ||
255 | |||
256 | return 0; | ||
257 | } | ||
258 | |||
259 | static int dpi_display_resume(struct omap_dss_device *dssdev) | ||
260 | { | ||
261 | if (dssdev->state != OMAP_DSS_DISPLAY_SUSPENDED) | ||
262 | return -EINVAL; | ||
263 | |||
264 | DSSDBG("dpi_display_resume\n"); | ||
265 | |||
266 | dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); | ||
267 | |||
268 | dispc_enable_lcd_out(1); | ||
269 | |||
270 | if (dssdev->driver->resume) | ||
271 | dssdev->driver->resume(dssdev); | ||
272 | |||
273 | dssdev->state = OMAP_DSS_DISPLAY_ACTIVE; | ||
274 | |||
275 | return 0; | ||
276 | } | ||
277 | |||
278 | static void dpi_set_timings(struct omap_dss_device *dssdev, | ||
279 | struct omap_video_timings *timings) | ||
280 | { | ||
281 | DSSDBG("dpi_set_timings\n"); | ||
282 | dssdev->panel.timings = *timings; | ||
283 | if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE) { | ||
284 | dpi_set_mode(dssdev); | ||
285 | dispc_go(OMAP_DSS_CHANNEL_LCD); | ||
286 | } | ||
287 | } | ||
288 | |||
289 | static int dpi_check_timings(struct omap_dss_device *dssdev, | ||
290 | struct omap_video_timings *timings) | ||
291 | { | ||
292 | bool is_tft; | ||
293 | int r; | ||
294 | int lck_div, pck_div; | ||
295 | unsigned long fck; | ||
296 | unsigned long pck; | ||
297 | |||
298 | if (!dispc_lcd_timings_ok(timings)) | ||
299 | return -EINVAL; | ||
300 | |||
301 | if (timings->pixel_clock == 0) | ||
302 | return -EINVAL; | ||
303 | |||
304 | is_tft = (dssdev->panel.config & OMAP_DSS_LCD_TFT) != 0; | ||
305 | |||
306 | #ifdef CONFIG_OMAP2_DSS_USE_DSI_PLL | ||
307 | { | ||
308 | struct dsi_clock_info dsi_cinfo; | ||
309 | struct dispc_clock_info dispc_cinfo; | ||
310 | r = dsi_pll_calc_clock_div_pck(is_tft, | ||
311 | timings->pixel_clock * 1000, | ||
312 | &dsi_cinfo, &dispc_cinfo); | ||
313 | |||
314 | if (r) | ||
315 | return r; | ||
316 | |||
317 | fck = dsi_cinfo.dsi1_pll_fclk; | ||
318 | lck_div = dispc_cinfo.lck_div; | ||
319 | pck_div = dispc_cinfo.pck_div; | ||
320 | } | ||
321 | #else | ||
322 | { | ||
323 | struct dss_clock_info dss_cinfo; | ||
324 | struct dispc_clock_info dispc_cinfo; | ||
325 | r = dss_calc_clock_div(is_tft, timings->pixel_clock * 1000, | ||
326 | &dss_cinfo, &dispc_cinfo); | ||
327 | |||
328 | if (r) | ||
329 | return r; | ||
330 | |||
331 | fck = dss_cinfo.fck; | ||
332 | lck_div = dispc_cinfo.lck_div; | ||
333 | pck_div = dispc_cinfo.pck_div; | ||
334 | } | ||
335 | #endif | ||
336 | |||
337 | pck = fck / lck_div / pck_div / 1000; | ||
338 | |||
339 | timings->pixel_clock = pck; | ||
340 | |||
341 | return 0; | ||
342 | } | ||
343 | |||
344 | static void dpi_get_timings(struct omap_dss_device *dssdev, | ||
345 | struct omap_video_timings *timings) | ||
346 | { | ||
347 | *timings = dssdev->panel.timings; | ||
348 | } | ||
349 | |||
350 | static int dpi_display_set_update_mode(struct omap_dss_device *dssdev, | ||
351 | enum omap_dss_update_mode mode) | ||
352 | { | ||
353 | if (mode == OMAP_DSS_UPDATE_MANUAL) | ||
354 | return -EINVAL; | ||
355 | |||
356 | if (mode == OMAP_DSS_UPDATE_DISABLED) { | ||
357 | dispc_enable_lcd_out(0); | ||
358 | dpi.update_enabled = 0; | ||
359 | } else { | ||
360 | dispc_enable_lcd_out(1); | ||
361 | dpi.update_enabled = 1; | ||
362 | } | ||
363 | |||
364 | return 0; | ||
365 | } | ||
366 | |||
367 | static enum omap_dss_update_mode dpi_display_get_update_mode( | ||
368 | struct omap_dss_device *dssdev) | ||
369 | { | ||
370 | return dpi.update_enabled ? OMAP_DSS_UPDATE_AUTO : | ||
371 | OMAP_DSS_UPDATE_DISABLED; | ||
372 | } | ||
373 | |||
374 | int dpi_init_display(struct omap_dss_device *dssdev) | ||
375 | { | ||
376 | DSSDBG("init_display\n"); | ||
377 | |||
378 | dssdev->enable = dpi_display_enable; | ||
379 | dssdev->disable = dpi_display_disable; | ||
380 | dssdev->suspend = dpi_display_suspend; | ||
381 | dssdev->resume = dpi_display_resume; | ||
382 | dssdev->set_timings = dpi_set_timings; | ||
383 | dssdev->check_timings = dpi_check_timings; | ||
384 | dssdev->get_timings = dpi_get_timings; | ||
385 | dssdev->set_update_mode = dpi_display_set_update_mode; | ||
386 | dssdev->get_update_mode = dpi_display_get_update_mode; | ||
387 | |||
388 | return 0; | ||
389 | } | ||
390 | |||
391 | int dpi_init(void) | ||
392 | { | ||
393 | return 0; | ||
394 | } | ||
395 | |||
396 | void dpi_exit(void) | ||
397 | { | ||
398 | } | ||
399 | |||
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c new file mode 100644 index 000000000000..5936487b5def --- /dev/null +++ b/drivers/video/omap2/dss/dsi.c | |||
@@ -0,0 +1,3710 @@ | |||
1 | /* | ||
2 | * linux/drivers/video/omap2/dss/dsi.c | ||
3 | * | ||
4 | * Copyright (C) 2009 Nokia Corporation | ||
5 | * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> | ||
6 | * | ||
7 | * This program is free software; you can redistribute it and/or modify it | ||
8 | * under the terms of the GNU General Public License version 2 as published by | ||
9 | * the Free Software Foundation. | ||
10 | * | ||
11 | * This program is distributed in the hope that it will be useful, but WITHOUT | ||
12 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | ||
13 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for | ||
14 | * more details. | ||
15 | * | ||
16 | * You should have received a copy of the GNU General Public License along with | ||
17 | * this program. If not, see <http://www.gnu.org/licenses/>. | ||
18 | */ | ||
19 | |||
20 | #define DSS_SUBSYS_NAME "DSI" | ||
21 | |||
22 | #include <linux/kernel.h> | ||
23 | #include <linux/io.h> | ||
24 | #include <linux/clk.h> | ||
25 | #include <linux/device.h> | ||
26 | #include <linux/err.h> | ||
27 | #include <linux/interrupt.h> | ||
28 | #include <linux/delay.h> | ||
29 | #include <linux/mutex.h> | ||
30 | #include <linux/seq_file.h> | ||
31 | #include <linux/platform_device.h> | ||
32 | #include <linux/regulator/consumer.h> | ||
33 | #include <linux/kthread.h> | ||
34 | #include <linux/wait.h> | ||
35 | |||
36 | #include <plat/display.h> | ||
37 | #include <plat/clock.h> | ||
38 | |||
39 | #include "dss.h" | ||
40 | |||
41 | /*#define VERBOSE_IRQ*/ | ||
42 | #define DSI_CATCH_MISSING_TE | ||
43 | |||
44 | #define DSI_BASE 0x4804FC00 | ||
45 | |||
46 | struct dsi_reg { u16 idx; }; | ||
47 | |||
48 | #define DSI_REG(idx) ((const struct dsi_reg) { idx }) | ||
49 | |||
50 | #define DSI_SZ_REGS SZ_1K | ||
51 | /* DSI Protocol Engine */ | ||
52 | |||
53 | #define DSI_REVISION DSI_REG(0x0000) | ||
54 | #define DSI_SYSCONFIG DSI_REG(0x0010) | ||
55 | #define DSI_SYSSTATUS DSI_REG(0x0014) | ||
56 | #define DSI_IRQSTATUS DSI_REG(0x0018) | ||
57 | #define DSI_IRQENABLE DSI_REG(0x001C) | ||
58 | #define DSI_CTRL DSI_REG(0x0040) | ||
59 | #define DSI_COMPLEXIO_CFG1 DSI_REG(0x0048) | ||
60 | #define DSI_COMPLEXIO_IRQ_STATUS DSI_REG(0x004C) | ||
61 | #define DSI_COMPLEXIO_IRQ_ENABLE DSI_REG(0x0050) | ||
62 | #define DSI_CLK_CTRL DSI_REG(0x0054) | ||
63 | #define DSI_TIMING1 DSI_REG(0x0058) | ||
64 | #define DSI_TIMING2 DSI_REG(0x005C) | ||
65 | #define DSI_VM_TIMING1 DSI_REG(0x0060) | ||
66 | #define DSI_VM_TIMING2 DSI_REG(0x0064) | ||
67 | #define DSI_VM_TIMING3 DSI_REG(0x0068) | ||
68 | #define DSI_CLK_TIMING DSI_REG(0x006C) | ||
69 | #define DSI_TX_FIFO_VC_SIZE DSI_REG(0x0070) | ||
70 | #define DSI_RX_FIFO_VC_SIZE DSI_REG(0x0074) | ||
71 | #define DSI_COMPLEXIO_CFG2 DSI_REG(0x0078) | ||
72 | #define DSI_RX_FIFO_VC_FULLNESS DSI_REG(0x007C) | ||
73 | #define DSI_VM_TIMING4 DSI_REG(0x0080) | ||
74 | #define DSI_TX_FIFO_VC_EMPTINESS DSI_REG(0x0084) | ||
75 | #define DSI_VM_TIMING5 DSI_REG(0x0088) | ||
76 | #define DSI_VM_TIMING6 DSI_REG(0x008C) | ||
77 | #define DSI_VM_TIMING7 DSI_REG(0x0090) | ||
78 | #define DSI_STOPCLK_TIMING DSI_REG(0x0094) | ||
79 | #define DSI_VC_CTRL(n) DSI_REG(0x0100 + (n * 0x20)) | ||
80 | #define DSI_VC_TE(n) DSI_REG(0x0104 + (n * 0x20)) | ||
81 | #define DSI_VC_LONG_PACKET_HEADER(n) DSI_REG(0x0108 + (n * 0x20)) | ||
82 | #define DSI_VC_LONG_PACKET_PAYLOAD(n) DSI_REG(0x010C + (n * 0x20)) | ||
83 | #define DSI_VC_SHORT_PACKET_HEADER(n) DSI_REG(0x0110 + (n * 0x20)) | ||
84 | #define DSI_VC_IRQSTATUS(n) DSI_REG(0x0118 + (n * 0x20)) | ||
85 | #define DSI_VC_IRQENABLE(n) DSI_REG(0x011C + (n * 0x20)) | ||
86 | |||
87 | /* DSIPHY_SCP */ | ||
88 | |||
89 | #define DSI_DSIPHY_CFG0 DSI_REG(0x200 + 0x0000) | ||
90 | #define DSI_DSIPHY_CFG1 DSI_REG(0x200 + 0x0004) | ||
91 | #define DSI_DSIPHY_CFG2 DSI_REG(0x200 + 0x0008) | ||
92 | #define DSI_DSIPHY_CFG5 DSI_REG(0x200 + 0x0014) | ||
93 | |||
94 | /* DSI_PLL_CTRL_SCP */ | ||
95 | |||
96 | #define DSI_PLL_CONTROL DSI_REG(0x300 + 0x0000) | ||
97 | #define DSI_PLL_STATUS DSI_REG(0x300 + 0x0004) | ||
98 | #define DSI_PLL_GO DSI_REG(0x300 + 0x0008) | ||
99 | #define DSI_PLL_CONFIGURATION1 DSI_REG(0x300 + 0x000C) | ||
100 | #define DSI_PLL_CONFIGURATION2 DSI_REG(0x300 + 0x0010) | ||
101 | |||
102 | #define REG_GET(idx, start, end) \ | ||
103 | FLD_GET(dsi_read_reg(idx), start, end) | ||
104 | |||
105 | #define REG_FLD_MOD(idx, val, start, end) \ | ||
106 | dsi_write_reg(idx, FLD_MOD(dsi_read_reg(idx), val, start, end)) | ||
107 | |||
108 | /* Global interrupts */ | ||
109 | #define DSI_IRQ_VC0 (1 << 0) | ||
110 | #define DSI_IRQ_VC1 (1 << 1) | ||
111 | #define DSI_IRQ_VC2 (1 << 2) | ||
112 | #define DSI_IRQ_VC3 (1 << 3) | ||
113 | #define DSI_IRQ_WAKEUP (1 << 4) | ||
114 | #define DSI_IRQ_RESYNC (1 << 5) | ||
115 | #define DSI_IRQ_PLL_LOCK (1 << 7) | ||
116 | #define DSI_IRQ_PLL_UNLOCK (1 << 8) | ||
117 | #define DSI_IRQ_PLL_RECALL (1 << 9) | ||
118 | #define DSI_IRQ_COMPLEXIO_ERR (1 << 10) | ||
119 | #define DSI_IRQ_HS_TX_TIMEOUT (1 << 14) | ||
120 | #define DSI_IRQ_LP_RX_TIMEOUT (1 << 15) | ||
121 | #define DSI_IRQ_TE_TRIGGER (1 << 16) | ||
122 | #define DSI_IRQ_ACK_TRIGGER (1 << 17) | ||
123 | #define DSI_IRQ_SYNC_LOST (1 << 18) | ||
124 | #define DSI_IRQ_LDO_POWER_GOOD (1 << 19) | ||
125 | #define DSI_IRQ_TA_TIMEOUT (1 << 20) | ||
126 | #define DSI_IRQ_ERROR_MASK \ | ||
127 | (DSI_IRQ_HS_TX_TIMEOUT | DSI_IRQ_LP_RX_TIMEOUT | DSI_IRQ_SYNC_LOST | \ | ||
128 | DSI_IRQ_TA_TIMEOUT) | ||
129 | #define DSI_IRQ_CHANNEL_MASK 0xf | ||
130 | |||
131 | /* Virtual channel interrupts */ | ||
132 | #define DSI_VC_IRQ_CS (1 << 0) | ||
133 | #define DSI_VC_IRQ_ECC_CORR (1 << 1) | ||
134 | #define DSI_VC_IRQ_PACKET_SENT (1 << 2) | ||
135 | #define DSI_VC_IRQ_FIFO_TX_OVF (1 << 3) | ||
136 | #define DSI_VC_IRQ_FIFO_RX_OVF (1 << 4) | ||
137 | #define DSI_VC_IRQ_BTA (1 << 5) | ||
138 | #define DSI_VC_IRQ_ECC_NO_CORR (1 << 6) | ||
139 | #define DSI_VC_IRQ_FIFO_TX_UDF (1 << 7) | ||
140 | #define DSI_VC_IRQ_PP_BUSY_CHANGE (1 << 8) | ||
141 | #define DSI_VC_IRQ_ERROR_MASK \ | ||
142 | (DSI_VC_IRQ_CS | DSI_VC_IRQ_ECC_CORR | DSI_VC_IRQ_FIFO_TX_OVF | \ | ||
143 | DSI_VC_IRQ_FIFO_RX_OVF | DSI_VC_IRQ_ECC_NO_CORR | \ | ||
144 | DSI_VC_IRQ_FIFO_TX_UDF) | ||
145 | |||
146 | /* ComplexIO interrupts */ | ||
147 | #define DSI_CIO_IRQ_ERRSYNCESC1 (1 << 0) | ||
148 | #define DSI_CIO_IRQ_ERRSYNCESC2 (1 << 1) | ||
149 | #define DSI_CIO_IRQ_ERRSYNCESC3 (1 << 2) | ||
150 | #define DSI_CIO_IRQ_ERRESC1 (1 << 5) | ||
151 | #define DSI_CIO_IRQ_ERRESC2 (1 << 6) | ||
152 | #define DSI_CIO_IRQ_ERRESC3 (1 << 7) | ||
153 | #define DSI_CIO_IRQ_ERRCONTROL1 (1 << 10) | ||
154 | #define DSI_CIO_IRQ_ERRCONTROL2 (1 << 11) | ||
155 | #define DSI_CIO_IRQ_ERRCONTROL3 (1 << 12) | ||
156 | #define DSI_CIO_IRQ_STATEULPS1 (1 << 15) | ||
157 | #define DSI_CIO_IRQ_STATEULPS2 (1 << 16) | ||
158 | #define DSI_CIO_IRQ_STATEULPS3 (1 << 17) | ||
159 | #define DSI_CIO_IRQ_ERRCONTENTIONLP0_1 (1 << 20) | ||
160 | #define DSI_CIO_IRQ_ERRCONTENTIONLP1_1 (1 << 21) | ||
161 | #define DSI_CIO_IRQ_ERRCONTENTIONLP0_2 (1 << 22) | ||
162 | #define DSI_CIO_IRQ_ERRCONTENTIONLP1_2 (1 << 23) | ||
163 | #define DSI_CIO_IRQ_ERRCONTENTIONLP0_3 (1 << 24) | ||
164 | #define DSI_CIO_IRQ_ERRCONTENTIONLP1_3 (1 << 25) | ||
165 | #define DSI_CIO_IRQ_ULPSACTIVENOT_ALL0 (1 << 30) | ||
166 | #define DSI_CIO_IRQ_ULPSACTIVENOT_ALL1 (1 << 31) | ||
167 | |||
168 | #define DSI_DT_DCS_SHORT_WRITE_0 0x05 | ||
169 | #define DSI_DT_DCS_SHORT_WRITE_1 0x15 | ||
170 | #define DSI_DT_DCS_READ 0x06 | ||
171 | #define DSI_DT_SET_MAX_RET_PKG_SIZE 0x37 | ||
172 | #define DSI_DT_NULL_PACKET 0x09 | ||
173 | #define DSI_DT_DCS_LONG_WRITE 0x39 | ||
174 | |||
175 | #define DSI_DT_RX_ACK_WITH_ERR 0x02 | ||
176 | #define DSI_DT_RX_DCS_LONG_READ 0x1c | ||
177 | #define DSI_DT_RX_SHORT_READ_1 0x21 | ||
178 | #define DSI_DT_RX_SHORT_READ_2 0x22 | ||
179 | |||
180 | #define FINT_MAX 2100000 | ||
181 | #define FINT_MIN 750000 | ||
182 | #define REGN_MAX (1 << 7) | ||
183 | #define REGM_MAX ((1 << 11) - 1) | ||
184 | #define REGM3_MAX (1 << 4) | ||
185 | #define REGM4_MAX (1 << 4) | ||
186 | #define LP_DIV_MAX ((1 << 13) - 1) | ||
187 | |||
188 | enum fifo_size { | ||
189 | DSI_FIFO_SIZE_0 = 0, | ||
190 | DSI_FIFO_SIZE_32 = 1, | ||
191 | DSI_FIFO_SIZE_64 = 2, | ||
192 | DSI_FIFO_SIZE_96 = 3, | ||
193 | DSI_FIFO_SIZE_128 = 4, | ||
194 | }; | ||
195 | |||
196 | enum dsi_vc_mode { | ||
197 | DSI_VC_MODE_L4 = 0, | ||
198 | DSI_VC_MODE_VP, | ||
199 | }; | ||
200 | |||
201 | struct dsi_update_region { | ||
202 | bool dirty; | ||
203 | u16 x, y, w, h; | ||
204 | struct omap_dss_device *device; | ||
205 | }; | ||
206 | |||
207 | static struct | ||
208 | { | ||
209 | void __iomem *base; | ||
210 | |||
211 | struct dsi_clock_info current_cinfo; | ||
212 | |||
213 | struct regulator *vdds_dsi_reg; | ||
214 | |||
215 | struct { | ||
216 | enum dsi_vc_mode mode; | ||
217 | struct omap_dss_device *dssdev; | ||
218 | enum fifo_size fifo_size; | ||
219 | int dest_per; /* destination peripheral 0-3 */ | ||
220 | } vc[4]; | ||
221 | |||
222 | struct mutex lock; | ||
223 | struct mutex bus_lock; | ||
224 | |||
225 | unsigned pll_locked; | ||
226 | |||
227 | struct completion bta_completion; | ||
228 | |||
229 | struct task_struct *thread; | ||
230 | wait_queue_head_t waitqueue; | ||
231 | |||
232 | spinlock_t update_lock; | ||
233 | bool framedone_received; | ||
234 | struct dsi_update_region update_region; | ||
235 | struct dsi_update_region active_update_region; | ||
236 | struct completion update_completion; | ||
237 | |||
238 | enum omap_dss_update_mode user_update_mode; | ||
239 | enum omap_dss_update_mode update_mode; | ||
240 | bool te_enabled; | ||
241 | bool use_ext_te; | ||
242 | |||
243 | #ifdef DSI_CATCH_MISSING_TE | ||
244 | struct timer_list te_timer; | ||
245 | #endif | ||
246 | |||
247 | unsigned long cache_req_pck; | ||
248 | unsigned long cache_clk_freq; | ||
249 | struct dsi_clock_info cache_cinfo; | ||
250 | |||
251 | u32 errors; | ||
252 | spinlock_t errors_lock; | ||
253 | #ifdef DEBUG | ||
254 | ktime_t perf_setup_time; | ||
255 | ktime_t perf_start_time; | ||
256 | ktime_t perf_start_time_auto; | ||
257 | int perf_measure_frames; | ||
258 | #endif | ||
259 | int debug_read; | ||
260 | int debug_write; | ||
261 | } dsi; | ||
262 | |||
263 | #ifdef DEBUG | ||
264 | static unsigned int dsi_perf; | ||
265 | module_param_named(dsi_perf, dsi_perf, bool, 0644); | ||
266 | #endif | ||
267 | |||
268 | static inline void dsi_write_reg(const struct dsi_reg idx, u32 val) | ||
269 | { | ||
270 | __raw_writel(val, dsi.base + idx.idx); | ||
271 | } | ||
272 | |||
273 | static inline u32 dsi_read_reg(const struct dsi_reg idx) | ||
274 | { | ||
275 | return __raw_readl(dsi.base + idx.idx); | ||
276 | } | ||
277 | |||
278 | |||
279 | void dsi_save_context(void) | ||
280 | { | ||
281 | } | ||
282 | |||
283 | void dsi_restore_context(void) | ||
284 | { | ||
285 | } | ||
286 | |||
287 | void dsi_bus_lock(void) | ||
288 | { | ||
289 | mutex_lock(&dsi.bus_lock); | ||
290 | } | ||
291 | EXPORT_SYMBOL(dsi_bus_lock); | ||
292 | |||
293 | void dsi_bus_unlock(void) | ||
294 | { | ||
295 | mutex_unlock(&dsi.bus_lock); | ||
296 | } | ||
297 | EXPORT_SYMBOL(dsi_bus_unlock); | ||
298 | |||
299 | static inline int wait_for_bit_change(const struct dsi_reg idx, int bitnum, | ||
300 | int value) | ||
301 | { | ||
302 | int t = 100000; | ||
303 | |||
304 | while (REG_GET(idx, bitnum, bitnum) != value) { | ||
305 | if (--t == 0) | ||
306 | return !value; | ||
307 | } | ||
308 | |||
309 | return value; | ||
310 | } | ||
311 | |||
312 | #ifdef DEBUG | ||
313 | static void dsi_perf_mark_setup(void) | ||
314 | { | ||
315 | dsi.perf_setup_time = ktime_get(); | ||
316 | } | ||
317 | |||
318 | static void dsi_perf_mark_start(void) | ||
319 | { | ||
320 | dsi.perf_start_time = ktime_get(); | ||
321 | } | ||
322 | |||
323 | static void dsi_perf_mark_start_auto(void) | ||
324 | { | ||
325 | dsi.perf_measure_frames = 0; | ||
326 | dsi.perf_start_time_auto = ktime_get(); | ||
327 | } | ||
328 | |||
329 | static void dsi_perf_show(const char *name) | ||
330 | { | ||
331 | ktime_t t, setup_time, trans_time; | ||
332 | u32 total_bytes; | ||
333 | u32 setup_us, trans_us, total_us; | ||
334 | |||
335 | if (!dsi_perf) | ||
336 | return; | ||
337 | |||
338 | if (dsi.update_mode == OMAP_DSS_UPDATE_DISABLED) | ||
339 | return; | ||
340 | |||
341 | t = ktime_get(); | ||
342 | |||
343 | setup_time = ktime_sub(dsi.perf_start_time, dsi.perf_setup_time); | ||
344 | setup_us = (u32)ktime_to_us(setup_time); | ||
345 | if (setup_us == 0) | ||
346 | setup_us = 1; | ||
347 | |||
348 | trans_time = ktime_sub(t, dsi.perf_start_time); | ||
349 | trans_us = (u32)ktime_to_us(trans_time); | ||
350 | if (trans_us == 0) | ||
351 | trans_us = 1; | ||
352 | |||
353 | total_us = setup_us + trans_us; | ||
354 | |||
355 | total_bytes = dsi.active_update_region.w * | ||
356 | dsi.active_update_region.h * | ||
357 | dsi.active_update_region.device->ctrl.pixel_size / 8; | ||
358 | |||
359 | if (dsi.update_mode == OMAP_DSS_UPDATE_AUTO) { | ||
360 | static u32 s_total_trans_us, s_total_setup_us; | ||
361 | static u32 s_min_trans_us = 0xffffffff, s_min_setup_us; | ||
362 | static u32 s_max_trans_us, s_max_setup_us; | ||
363 | const int numframes = 100; | ||
364 | ktime_t total_time_auto; | ||
365 | u32 total_time_auto_us; | ||
366 | |||
367 | dsi.perf_measure_frames++; | ||
368 | |||
369 | if (setup_us < s_min_setup_us) | ||
370 | s_min_setup_us = setup_us; | ||
371 | |||
372 | if (setup_us > s_max_setup_us) | ||
373 | s_max_setup_us = setup_us; | ||
374 | |||
375 | s_total_setup_us += setup_us; | ||
376 | |||
377 | if (trans_us < s_min_trans_us) | ||
378 | s_min_trans_us = trans_us; | ||
379 | |||
380 | if (trans_us > s_max_trans_us) | ||
381 | s_max_trans_us = trans_us; | ||
382 | |||
383 | s_total_trans_us += trans_us; | ||
384 | |||
385 | if (dsi.perf_measure_frames < numframes) | ||
386 | return; | ||
387 | |||
388 | total_time_auto = ktime_sub(t, dsi.perf_start_time_auto); | ||
389 | total_time_auto_us = (u32)ktime_to_us(total_time_auto); | ||
390 | |||
391 | printk(KERN_INFO "DSI(%s): %u fps, setup %u/%u/%u, " | ||
392 | "trans %u/%u/%u\n", | ||
393 | name, | ||
394 | 1000 * 1000 * numframes / total_time_auto_us, | ||
395 | s_min_setup_us, | ||
396 | s_max_setup_us, | ||
397 | s_total_setup_us / numframes, | ||
398 | s_min_trans_us, | ||
399 | s_max_trans_us, | ||
400 | s_total_trans_us / numframes); | ||
401 | |||
402 | s_total_setup_us = 0; | ||
403 | s_min_setup_us = 0xffffffff; | ||
404 | s_max_setup_us = 0; | ||
405 | s_total_trans_us = 0; | ||
406 | s_min_trans_us = 0xffffffff; | ||
407 | s_max_trans_us = 0; | ||
408 | dsi_perf_mark_start_auto(); | ||
409 | } else { | ||
410 | printk(KERN_INFO "DSI(%s): %u us + %u us = %u us (%uHz), " | ||
411 | "%u bytes, %u kbytes/sec\n", | ||
412 | name, | ||
413 | setup_us, | ||
414 | trans_us, | ||
415 | total_us, | ||
416 | 1000*1000 / total_us, | ||
417 | total_bytes, | ||
418 | total_bytes * 1000 / total_us); | ||
419 | } | ||
420 | } | ||
421 | #else | ||
422 | #define dsi_perf_mark_setup() | ||
423 | #define dsi_perf_mark_start() | ||
424 | #define dsi_perf_mark_start_auto() | ||
425 | #define dsi_perf_show(x) | ||
426 | #endif | ||
427 | |||
428 | static void print_irq_status(u32 status) | ||
429 | { | ||
430 | #ifndef VERBOSE_IRQ | ||
431 | if ((status & ~DSI_IRQ_CHANNEL_MASK) == 0) | ||
432 | return; | ||
433 | #endif | ||
434 | printk(KERN_DEBUG "DSI IRQ: 0x%x: ", status); | ||
435 | |||
436 | #define PIS(x) \ | ||
437 | if (status & DSI_IRQ_##x) \ | ||
438 | printk(#x " "); | ||
439 | #ifdef VERBOSE_IRQ | ||
440 | PIS(VC0); | ||
441 | PIS(VC1); | ||
442 | PIS(VC2); | ||
443 | PIS(VC3); | ||
444 | #endif | ||
445 | PIS(WAKEUP); | ||
446 | PIS(RESYNC); | ||
447 | PIS(PLL_LOCK); | ||
448 | PIS(PLL_UNLOCK); | ||
449 | PIS(PLL_RECALL); | ||
450 | PIS(COMPLEXIO_ERR); | ||
451 | PIS(HS_TX_TIMEOUT); | ||
452 | PIS(LP_RX_TIMEOUT); | ||
453 | PIS(TE_TRIGGER); | ||
454 | PIS(ACK_TRIGGER); | ||
455 | PIS(SYNC_LOST); | ||
456 | PIS(LDO_POWER_GOOD); | ||
457 | PIS(TA_TIMEOUT); | ||
458 | #undef PIS | ||
459 | |||
460 | printk("\n"); | ||
461 | } | ||
462 | |||
463 | static void print_irq_status_vc(int channel, u32 status) | ||
464 | { | ||
465 | #ifndef VERBOSE_IRQ | ||
466 | if ((status & ~DSI_VC_IRQ_PACKET_SENT) == 0) | ||
467 | return; | ||
468 | #endif | ||
469 | printk(KERN_DEBUG "DSI VC(%d) IRQ 0x%x: ", channel, status); | ||
470 | |||
471 | #define PIS(x) \ | ||
472 | if (status & DSI_VC_IRQ_##x) \ | ||
473 | printk(#x " "); | ||
474 | PIS(CS); | ||
475 | PIS(ECC_CORR); | ||
476 | #ifdef VERBOSE_IRQ | ||
477 | PIS(PACKET_SENT); | ||
478 | #endif | ||
479 | PIS(FIFO_TX_OVF); | ||
480 | PIS(FIFO_RX_OVF); | ||
481 | PIS(BTA); | ||
482 | PIS(ECC_NO_CORR); | ||
483 | PIS(FIFO_TX_UDF); | ||
484 | PIS(PP_BUSY_CHANGE); | ||
485 | #undef PIS | ||
486 | printk("\n"); | ||
487 | } | ||
488 | |||
489 | static void print_irq_status_cio(u32 status) | ||
490 | { | ||
491 | printk(KERN_DEBUG "DSI CIO IRQ 0x%x: ", status); | ||
492 | |||
493 | #define PIS(x) \ | ||
494 | if (status & DSI_CIO_IRQ_##x) \ | ||
495 | printk(#x " "); | ||
496 | PIS(ERRSYNCESC1); | ||
497 | PIS(ERRSYNCESC2); | ||
498 | PIS(ERRSYNCESC3); | ||
499 | PIS(ERRESC1); | ||
500 | PIS(ERRESC2); | ||
501 | PIS(ERRESC3); | ||
502 | PIS(ERRCONTROL1); | ||
503 | PIS(ERRCONTROL2); | ||
504 | PIS(ERRCONTROL3); | ||
505 | PIS(STATEULPS1); | ||
506 | PIS(STATEULPS2); | ||
507 | PIS(STATEULPS3); | ||
508 | PIS(ERRCONTENTIONLP0_1); | ||
509 | PIS(ERRCONTENTIONLP1_1); | ||
510 | PIS(ERRCONTENTIONLP0_2); | ||
511 | PIS(ERRCONTENTIONLP1_2); | ||
512 | PIS(ERRCONTENTIONLP0_3); | ||
513 | PIS(ERRCONTENTIONLP1_3); | ||
514 | PIS(ULPSACTIVENOT_ALL0); | ||
515 | PIS(ULPSACTIVENOT_ALL1); | ||
516 | #undef PIS | ||
517 | |||
518 | printk("\n"); | ||
519 | } | ||
520 | |||
521 | static int debug_irq; | ||
522 | |||
523 | /* called from dss */ | ||
524 | void dsi_irq_handler(void) | ||
525 | { | ||
526 | u32 irqstatus, vcstatus, ciostatus; | ||
527 | int i; | ||
528 | |||
529 | irqstatus = dsi_read_reg(DSI_IRQSTATUS); | ||
530 | |||
531 | if (irqstatus & DSI_IRQ_ERROR_MASK) { | ||
532 | DSSERR("DSI error, irqstatus %x\n", irqstatus); | ||
533 | print_irq_status(irqstatus); | ||
534 | spin_lock(&dsi.errors_lock); | ||
535 | dsi.errors |= irqstatus & DSI_IRQ_ERROR_MASK; | ||
536 | spin_unlock(&dsi.errors_lock); | ||
537 | } else if (debug_irq) { | ||
538 | print_irq_status(irqstatus); | ||
539 | } | ||
540 | |||
541 | #ifdef DSI_CATCH_MISSING_TE | ||
542 | if (irqstatus & DSI_IRQ_TE_TRIGGER) | ||
543 | del_timer(&dsi.te_timer); | ||
544 | #endif | ||
545 | |||
546 | for (i = 0; i < 4; ++i) { | ||
547 | if ((irqstatus & (1<<i)) == 0) | ||
548 | continue; | ||
549 | |||
550 | vcstatus = dsi_read_reg(DSI_VC_IRQSTATUS(i)); | ||
551 | |||
552 | if (vcstatus & DSI_VC_IRQ_BTA) | ||
553 | complete(&dsi.bta_completion); | ||
554 | |||
555 | if (vcstatus & DSI_VC_IRQ_ERROR_MASK) { | ||
556 | DSSERR("DSI VC(%d) error, vc irqstatus %x\n", | ||
557 | i, vcstatus); | ||
558 | print_irq_status_vc(i, vcstatus); | ||
559 | } else if (debug_irq) { | ||
560 | print_irq_status_vc(i, vcstatus); | ||
561 | } | ||
562 | |||
563 | dsi_write_reg(DSI_VC_IRQSTATUS(i), vcstatus); | ||
564 | /* flush posted write */ | ||
565 | dsi_read_reg(DSI_VC_IRQSTATUS(i)); | ||
566 | } | ||
567 | |||
568 | if (irqstatus & DSI_IRQ_COMPLEXIO_ERR) { | ||
569 | ciostatus = dsi_read_reg(DSI_COMPLEXIO_IRQ_STATUS); | ||
570 | |||
571 | dsi_write_reg(DSI_COMPLEXIO_IRQ_STATUS, ciostatus); | ||
572 | /* flush posted write */ | ||
573 | dsi_read_reg(DSI_COMPLEXIO_IRQ_STATUS); | ||
574 | |||
575 | DSSERR("DSI CIO error, cio irqstatus %x\n", ciostatus); | ||
576 | print_irq_status_cio(ciostatus); | ||
577 | } | ||
578 | |||
579 | dsi_write_reg(DSI_IRQSTATUS, irqstatus & ~DSI_IRQ_CHANNEL_MASK); | ||
580 | /* flush posted write */ | ||
581 | dsi_read_reg(DSI_IRQSTATUS); | ||
582 | } | ||
583 | |||
584 | |||
585 | static void _dsi_initialize_irq(void) | ||
586 | { | ||
587 | u32 l; | ||
588 | int i; | ||
589 | |||
590 | /* disable all interrupts */ | ||
591 | dsi_write_reg(DSI_IRQENABLE, 0); | ||
592 | for (i = 0; i < 4; ++i) | ||
593 | dsi_write_reg(DSI_VC_IRQENABLE(i), 0); | ||
594 | dsi_write_reg(DSI_COMPLEXIO_IRQ_ENABLE, 0); | ||
595 | |||
596 | /* clear interrupt status */ | ||
597 | l = dsi_read_reg(DSI_IRQSTATUS); | ||
598 | dsi_write_reg(DSI_IRQSTATUS, l & ~DSI_IRQ_CHANNEL_MASK); | ||
599 | |||
600 | for (i = 0; i < 4; ++i) { | ||
601 | l = dsi_read_reg(DSI_VC_IRQSTATUS(i)); | ||
602 | dsi_write_reg(DSI_VC_IRQSTATUS(i), l); | ||
603 | } | ||
604 | |||
605 | l = dsi_read_reg(DSI_COMPLEXIO_IRQ_STATUS); | ||
606 | dsi_write_reg(DSI_COMPLEXIO_IRQ_STATUS, l); | ||
607 | |||
608 | /* enable error irqs */ | ||
609 | l = DSI_IRQ_ERROR_MASK; | ||
610 | #ifdef DSI_CATCH_MISSING_TE | ||
611 | l |= DSI_IRQ_TE_TRIGGER; | ||
612 | #endif | ||
613 | dsi_write_reg(DSI_IRQENABLE, l); | ||
614 | |||
615 | l = DSI_VC_IRQ_ERROR_MASK; | ||
616 | for (i = 0; i < 4; ++i) | ||
617 | dsi_write_reg(DSI_VC_IRQENABLE(i), l); | ||
618 | |||
619 | /* XXX zonda responds incorrectly, causing control error: | ||
620 | Exit from LP-ESC mode to LP11 uses wrong transition states on the | ||
621 | data lines LP0 and LN0. */ | ||
622 | dsi_write_reg(DSI_COMPLEXIO_IRQ_ENABLE, | ||
623 | -1 & (~DSI_CIO_IRQ_ERRCONTROL2)); | ||
624 | } | ||
625 | |||
626 | static u32 dsi_get_errors(void) | ||
627 | { | ||
628 | unsigned long flags; | ||
629 | u32 e; | ||
630 | spin_lock_irqsave(&dsi.errors_lock, flags); | ||
631 | e = dsi.errors; | ||
632 | dsi.errors = 0; | ||
633 | spin_unlock_irqrestore(&dsi.errors_lock, flags); | ||
634 | return e; | ||
635 | } | ||
636 | |||
637 | static void dsi_vc_enable_bta_irq(int channel) | ||
638 | { | ||
639 | u32 l; | ||
640 | |||
641 | dsi_write_reg(DSI_VC_IRQSTATUS(channel), DSI_VC_IRQ_BTA); | ||
642 | |||
643 | l = dsi_read_reg(DSI_VC_IRQENABLE(channel)); | ||
644 | l |= DSI_VC_IRQ_BTA; | ||
645 | dsi_write_reg(DSI_VC_IRQENABLE(channel), l); | ||
646 | } | ||
647 | |||
648 | static void dsi_vc_disable_bta_irq(int channel) | ||
649 | { | ||
650 | u32 l; | ||
651 | |||
652 | l = dsi_read_reg(DSI_VC_IRQENABLE(channel)); | ||
653 | l &= ~DSI_VC_IRQ_BTA; | ||
654 | dsi_write_reg(DSI_VC_IRQENABLE(channel), l); | ||
655 | } | ||
656 | |||
657 | /* DSI func clock. this could also be DSI2_PLL_FCLK */ | ||
658 | static inline void enable_clocks(bool enable) | ||
659 | { | ||
660 | if (enable) | ||
661 | dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); | ||
662 | else | ||
663 | dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); | ||
664 | } | ||
665 | |||
666 | /* source clock for DSI PLL. this could also be PCLKFREE */ | ||
667 | static inline void dsi_enable_pll_clock(bool enable) | ||
668 | { | ||
669 | if (enable) | ||
670 | dss_clk_enable(DSS_CLK_FCK2); | ||
671 | else | ||
672 | dss_clk_disable(DSS_CLK_FCK2); | ||
673 | |||
674 | if (enable && dsi.pll_locked) { | ||
675 | if (wait_for_bit_change(DSI_PLL_STATUS, 1, 1) != 1) | ||
676 | DSSERR("cannot lock PLL when enabling clocks\n"); | ||
677 | } | ||
678 | } | ||
679 | |||
680 | #ifdef DEBUG | ||
681 | static void _dsi_print_reset_status(void) | ||
682 | { | ||
683 | u32 l; | ||
684 | |||
685 | if (!dss_debug) | ||
686 | return; | ||
687 | |||
688 | /* A dummy read using the SCP interface to any DSIPHY register is | ||
689 | * required after DSIPHY reset to complete the reset of the DSI complex | ||
690 | * I/O. */ | ||
691 | l = dsi_read_reg(DSI_DSIPHY_CFG5); | ||
692 | |||
693 | printk(KERN_DEBUG "DSI resets: "); | ||
694 | |||
695 | l = dsi_read_reg(DSI_PLL_STATUS); | ||
696 | printk("PLL (%d) ", FLD_GET(l, 0, 0)); | ||
697 | |||
698 | l = dsi_read_reg(DSI_COMPLEXIO_CFG1); | ||
699 | printk("CIO (%d) ", FLD_GET(l, 29, 29)); | ||
700 | |||
701 | l = dsi_read_reg(DSI_DSIPHY_CFG5); | ||
702 | printk("PHY (%x, %d, %d, %d)\n", | ||
703 | FLD_GET(l, 28, 26), | ||
704 | FLD_GET(l, 29, 29), | ||
705 | FLD_GET(l, 30, 30), | ||
706 | FLD_GET(l, 31, 31)); | ||
707 | } | ||
708 | #else | ||
709 | #define _dsi_print_reset_status() | ||
710 | #endif | ||
711 | |||
712 | static inline int dsi_if_enable(bool enable) | ||
713 | { | ||
714 | DSSDBG("dsi_if_enable(%d)\n", enable); | ||
715 | |||
716 | enable = enable ? 1 : 0; | ||
717 | REG_FLD_MOD(DSI_CTRL, enable, 0, 0); /* IF_EN */ | ||
718 | |||
719 | if (wait_for_bit_change(DSI_CTRL, 0, enable) != enable) { | ||
720 | DSSERR("Failed to set dsi_if_enable to %d\n", enable); | ||
721 | return -EIO; | ||
722 | } | ||
723 | |||
724 | return 0; | ||
725 | } | ||
726 | |||
727 | unsigned long dsi_get_dsi1_pll_rate(void) | ||
728 | { | ||
729 | return dsi.current_cinfo.dsi1_pll_fclk; | ||
730 | } | ||
731 | |||
732 | static unsigned long dsi_get_dsi2_pll_rate(void) | ||
733 | { | ||
734 | return dsi.current_cinfo.dsi2_pll_fclk; | ||
735 | } | ||
736 | |||
737 | static unsigned long dsi_get_txbyteclkhs(void) | ||
738 | { | ||
739 | return dsi.current_cinfo.clkin4ddr / 16; | ||
740 | } | ||
741 | |||
742 | static unsigned long dsi_fclk_rate(void) | ||
743 | { | ||
744 | unsigned long r; | ||
745 | |||
746 | if (dss_get_dsi_clk_source() == 0) { | ||
747 | /* DSI FCLK source is DSS1_ALWON_FCK, which is dss1_fck */ | ||
748 | r = dss_clk_get_rate(DSS_CLK_FCK1); | ||
749 | } else { | ||
750 | /* DSI FCLK source is DSI2_PLL_FCLK */ | ||
751 | r = dsi_get_dsi2_pll_rate(); | ||
752 | } | ||
753 | |||
754 | return r; | ||
755 | } | ||
756 | |||
757 | static int dsi_set_lp_clk_divisor(struct omap_dss_device *dssdev) | ||
758 | { | ||
759 | unsigned long dsi_fclk; | ||
760 | unsigned lp_clk_div; | ||
761 | unsigned long lp_clk; | ||
762 | |||
763 | lp_clk_div = dssdev->phy.dsi.div.lp_clk_div; | ||
764 | |||
765 | if (lp_clk_div == 0 || lp_clk_div > LP_DIV_MAX) | ||
766 | return -EINVAL; | ||
767 | |||
768 | dsi_fclk = dsi_fclk_rate(); | ||
769 | |||
770 | lp_clk = dsi_fclk / 2 / lp_clk_div; | ||
771 | |||
772 | DSSDBG("LP_CLK_DIV %u, LP_CLK %lu\n", lp_clk_div, lp_clk); | ||
773 | dsi.current_cinfo.lp_clk = lp_clk; | ||
774 | dsi.current_cinfo.lp_clk_div = lp_clk_div; | ||
775 | |||
776 | REG_FLD_MOD(DSI_CLK_CTRL, lp_clk_div, 12, 0); /* LP_CLK_DIVISOR */ | ||
777 | |||
778 | REG_FLD_MOD(DSI_CLK_CTRL, dsi_fclk > 30000000 ? 1 : 0, | ||
779 | 21, 21); /* LP_RX_SYNCHRO_ENABLE */ | ||
780 | |||
781 | return 0; | ||
782 | } | ||
783 | |||
784 | |||
785 | enum dsi_pll_power_state { | ||
786 | DSI_PLL_POWER_OFF = 0x0, | ||
787 | DSI_PLL_POWER_ON_HSCLK = 0x1, | ||
788 | DSI_PLL_POWER_ON_ALL = 0x2, | ||
789 | DSI_PLL_POWER_ON_DIV = 0x3, | ||
790 | }; | ||
791 | |||
792 | static int dsi_pll_power(enum dsi_pll_power_state state) | ||
793 | { | ||
794 | int t = 0; | ||
795 | |||
796 | REG_FLD_MOD(DSI_CLK_CTRL, state, 31, 30); /* PLL_PWR_CMD */ | ||
797 | |||
798 | /* PLL_PWR_STATUS */ | ||
799 | while (FLD_GET(dsi_read_reg(DSI_CLK_CTRL), 29, 28) != state) { | ||
800 | udelay(1); | ||
801 | if (t++ > 1000) { | ||
802 | DSSERR("Failed to set DSI PLL power mode to %d\n", | ||
803 | state); | ||
804 | return -ENODEV; | ||
805 | } | ||
806 | } | ||
807 | |||
808 | return 0; | ||
809 | } | ||
810 | |||
811 | /* calculate clock rates using dividers in cinfo */ | ||
812 | static int dsi_calc_clock_rates(struct dsi_clock_info *cinfo) | ||
813 | { | ||
814 | if (cinfo->regn == 0 || cinfo->regn > REGN_MAX) | ||
815 | return -EINVAL; | ||
816 | |||
817 | if (cinfo->regm == 0 || cinfo->regm > REGM_MAX) | ||
818 | return -EINVAL; | ||
819 | |||
820 | if (cinfo->regm3 > REGM3_MAX) | ||
821 | return -EINVAL; | ||
822 | |||
823 | if (cinfo->regm4 > REGM4_MAX) | ||
824 | return -EINVAL; | ||
825 | |||
826 | if (cinfo->use_dss2_fck) { | ||
827 | cinfo->clkin = dss_clk_get_rate(DSS_CLK_FCK2); | ||
828 | /* XXX it is unclear if highfreq should be used | ||
829 | * with DSS2_FCK source also */ | ||
830 | cinfo->highfreq = 0; | ||
831 | } else { | ||
832 | cinfo->clkin = dispc_pclk_rate(); | ||
833 | |||
834 | if (cinfo->clkin < 32000000) | ||
835 | cinfo->highfreq = 0; | ||
836 | else | ||
837 | cinfo->highfreq = 1; | ||
838 | } | ||
839 | |||
840 | cinfo->fint = cinfo->clkin / (cinfo->regn * (cinfo->highfreq ? 2 : 1)); | ||
841 | |||
842 | if (cinfo->fint > FINT_MAX || cinfo->fint < FINT_MIN) | ||
843 | return -EINVAL; | ||
844 | |||
845 | cinfo->clkin4ddr = 2 * cinfo->regm * cinfo->fint; | ||
846 | |||
847 | if (cinfo->clkin4ddr > 1800 * 1000 * 1000) | ||
848 | return -EINVAL; | ||
849 | |||
850 | if (cinfo->regm3 > 0) | ||
851 | cinfo->dsi1_pll_fclk = cinfo->clkin4ddr / cinfo->regm3; | ||
852 | else | ||
853 | cinfo->dsi1_pll_fclk = 0; | ||
854 | |||
855 | if (cinfo->regm4 > 0) | ||
856 | cinfo->dsi2_pll_fclk = cinfo->clkin4ddr / cinfo->regm4; | ||
857 | else | ||
858 | cinfo->dsi2_pll_fclk = 0; | ||
859 | |||
860 | return 0; | ||
861 | } | ||
862 | |||
863 | int dsi_pll_calc_clock_div_pck(bool is_tft, unsigned long req_pck, | ||
864 | struct dsi_clock_info *dsi_cinfo, | ||
865 | struct dispc_clock_info *dispc_cinfo) | ||
866 | { | ||
867 | struct dsi_clock_info cur, best; | ||
868 | struct dispc_clock_info best_dispc; | ||
869 | int min_fck_per_pck; | ||
870 | int match = 0; | ||
871 | unsigned long dss_clk_fck2; | ||
872 | |||
873 | dss_clk_fck2 = dss_clk_get_rate(DSS_CLK_FCK2); | ||
874 | |||
875 | if (req_pck == dsi.cache_req_pck && | ||
876 | dsi.cache_cinfo.clkin == dss_clk_fck2) { | ||
877 | DSSDBG("DSI clock info found from cache\n"); | ||
878 | *dsi_cinfo = dsi.cache_cinfo; | ||
879 | dispc_find_clk_divs(is_tft, req_pck, dsi_cinfo->dsi1_pll_fclk, | ||
880 | dispc_cinfo); | ||
881 | return 0; | ||
882 | } | ||
883 | |||
884 | min_fck_per_pck = CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK; | ||
885 | |||
886 | if (min_fck_per_pck && | ||
887 | req_pck * min_fck_per_pck > DISPC_MAX_FCK) { | ||
888 | DSSERR("Requested pixel clock not possible with the current " | ||
889 | "OMAP2_DSS_MIN_FCK_PER_PCK setting. Turning " | ||
890 | "the constraint off.\n"); | ||
891 | min_fck_per_pck = 0; | ||
892 | } | ||
893 | |||
894 | DSSDBG("dsi_pll_calc\n"); | ||
895 | |||
896 | retry: | ||
897 | memset(&best, 0, sizeof(best)); | ||
898 | memset(&best_dispc, 0, sizeof(best_dispc)); | ||
899 | |||
900 | memset(&cur, 0, sizeof(cur)); | ||
901 | cur.clkin = dss_clk_fck2; | ||
902 | cur.use_dss2_fck = 1; | ||
903 | cur.highfreq = 0; | ||
904 | |||
905 | /* no highfreq: 0.75MHz < Fint = clkin / regn < 2.1MHz */ | ||
906 | /* highfreq: 0.75MHz < Fint = clkin / (2*regn) < 2.1MHz */ | ||
907 | /* To reduce PLL lock time, keep Fint high (around 2 MHz) */ | ||
908 | for (cur.regn = 1; cur.regn < REGN_MAX; ++cur.regn) { | ||
909 | if (cur.highfreq == 0) | ||
910 | cur.fint = cur.clkin / cur.regn; | ||
911 | else | ||
912 | cur.fint = cur.clkin / (2 * cur.regn); | ||
913 | |||
914 | if (cur.fint > FINT_MAX || cur.fint < FINT_MIN) | ||
915 | continue; | ||
916 | |||
917 | /* DSIPHY(MHz) = (2 * regm / regn) * (clkin / (highfreq + 1)) */ | ||
918 | for (cur.regm = 1; cur.regm < REGM_MAX; ++cur.regm) { | ||
919 | unsigned long a, b; | ||
920 | |||
921 | a = 2 * cur.regm * (cur.clkin/1000); | ||
922 | b = cur.regn * (cur.highfreq + 1); | ||
923 | cur.clkin4ddr = a / b * 1000; | ||
924 | |||
925 | if (cur.clkin4ddr > 1800 * 1000 * 1000) | ||
926 | break; | ||
927 | |||
928 | /* DSI1_PLL_FCLK(MHz) = DSIPHY(MHz) / regm3 < 173MHz */ | ||
929 | for (cur.regm3 = 1; cur.regm3 < REGM3_MAX; | ||
930 | ++cur.regm3) { | ||
931 | struct dispc_clock_info cur_dispc; | ||
932 | cur.dsi1_pll_fclk = cur.clkin4ddr / cur.regm3; | ||
933 | |||
934 | /* this will narrow down the search a bit, | ||
935 | * but still give pixclocks below what was | ||
936 | * requested */ | ||
937 | if (cur.dsi1_pll_fclk < req_pck) | ||
938 | break; | ||
939 | |||
940 | if (cur.dsi1_pll_fclk > DISPC_MAX_FCK) | ||
941 | continue; | ||
942 | |||
943 | if (min_fck_per_pck && | ||
944 | cur.dsi1_pll_fclk < | ||
945 | req_pck * min_fck_per_pck) | ||
946 | continue; | ||
947 | |||
948 | match = 1; | ||
949 | |||
950 | dispc_find_clk_divs(is_tft, req_pck, | ||
951 | cur.dsi1_pll_fclk, | ||
952 | &cur_dispc); | ||
953 | |||
954 | if (abs(cur_dispc.pck - req_pck) < | ||
955 | abs(best_dispc.pck - req_pck)) { | ||
956 | best = cur; | ||
957 | best_dispc = cur_dispc; | ||
958 | |||
959 | if (cur_dispc.pck == req_pck) | ||
960 | goto found; | ||
961 | } | ||
962 | } | ||
963 | } | ||
964 | } | ||
965 | found: | ||
966 | if (!match) { | ||
967 | if (min_fck_per_pck) { | ||
968 | DSSERR("Could not find suitable clock settings.\n" | ||
969 | "Turning FCK/PCK constraint off and" | ||
970 | "trying again.\n"); | ||
971 | min_fck_per_pck = 0; | ||
972 | goto retry; | ||
973 | } | ||
974 | |||
975 | DSSERR("Could not find suitable clock settings.\n"); | ||
976 | |||
977 | return -EINVAL; | ||
978 | } | ||
979 | |||
980 | /* DSI2_PLL_FCLK (regm4) is not used */ | ||
981 | best.regm4 = 0; | ||
982 | best.dsi2_pll_fclk = 0; | ||
983 | |||
984 | if (dsi_cinfo) | ||
985 | *dsi_cinfo = best; | ||
986 | if (dispc_cinfo) | ||
987 | *dispc_cinfo = best_dispc; | ||
988 | |||
989 | dsi.cache_req_pck = req_pck; | ||
990 | dsi.cache_clk_freq = 0; | ||
991 | dsi.cache_cinfo = best; | ||
992 | |||
993 | return 0; | ||
994 | } | ||
995 | |||
996 | int dsi_pll_set_clock_div(struct dsi_clock_info *cinfo) | ||
997 | { | ||
998 | int r = 0; | ||
999 | u32 l; | ||
1000 | int f; | ||
1001 | |||
1002 | DSSDBGF(); | ||
1003 | |||
1004 | dsi.current_cinfo.fint = cinfo->fint; | ||
1005 | dsi.current_cinfo.clkin4ddr = cinfo->clkin4ddr; | ||
1006 | dsi.current_cinfo.dsi1_pll_fclk = cinfo->dsi1_pll_fclk; | ||
1007 | dsi.current_cinfo.dsi2_pll_fclk = cinfo->dsi2_pll_fclk; | ||
1008 | |||
1009 | dsi.current_cinfo.regn = cinfo->regn; | ||
1010 | dsi.current_cinfo.regm = cinfo->regm; | ||
1011 | dsi.current_cinfo.regm3 = cinfo->regm3; | ||
1012 | dsi.current_cinfo.regm4 = cinfo->regm4; | ||
1013 | |||
1014 | DSSDBG("DSI Fint %ld\n", cinfo->fint); | ||
1015 | |||
1016 | DSSDBG("clkin (%s) rate %ld, highfreq %d\n", | ||
1017 | cinfo->use_dss2_fck ? "dss2_fck" : "pclkfree", | ||
1018 | cinfo->clkin, | ||
1019 | cinfo->highfreq); | ||
1020 | |||
1021 | /* DSIPHY == CLKIN4DDR */ | ||
1022 | DSSDBG("CLKIN4DDR = 2 * %d / %d * %lu / %d = %lu\n", | ||
1023 | cinfo->regm, | ||
1024 | cinfo->regn, | ||
1025 | cinfo->clkin, | ||
1026 | cinfo->highfreq + 1, | ||
1027 | cinfo->clkin4ddr); | ||
1028 | |||
1029 | DSSDBG("Data rate on 1 DSI lane %ld Mbps\n", | ||
1030 | cinfo->clkin4ddr / 1000 / 1000 / 2); | ||
1031 | |||
1032 | DSSDBG("Clock lane freq %ld Hz\n", cinfo->clkin4ddr / 4); | ||
1033 | |||
1034 | DSSDBG("regm3 = %d, dsi1_pll_fclk = %lu\n", | ||
1035 | cinfo->regm3, cinfo->dsi1_pll_fclk); | ||
1036 | DSSDBG("regm4 = %d, dsi2_pll_fclk = %lu\n", | ||
1037 | cinfo->regm4, cinfo->dsi2_pll_fclk); | ||
1038 | |||
1039 | REG_FLD_MOD(DSI_PLL_CONTROL, 0, 0, 0); /* DSI_PLL_AUTOMODE = manual */ | ||
1040 | |||
1041 | l = dsi_read_reg(DSI_PLL_CONFIGURATION1); | ||
1042 | l = FLD_MOD(l, 1, 0, 0); /* DSI_PLL_STOPMODE */ | ||
1043 | l = FLD_MOD(l, cinfo->regn - 1, 7, 1); /* DSI_PLL_REGN */ | ||
1044 | l = FLD_MOD(l, cinfo->regm, 18, 8); /* DSI_PLL_REGM */ | ||
1045 | l = FLD_MOD(l, cinfo->regm3 > 0 ? cinfo->regm3 - 1 : 0, | ||
1046 | 22, 19); /* DSI_CLOCK_DIV */ | ||
1047 | l = FLD_MOD(l, cinfo->regm4 > 0 ? cinfo->regm4 - 1 : 0, | ||
1048 | 26, 23); /* DSIPROTO_CLOCK_DIV */ | ||
1049 | dsi_write_reg(DSI_PLL_CONFIGURATION1, l); | ||
1050 | |||
1051 | BUG_ON(cinfo->fint < 750000 || cinfo->fint > 2100000); | ||
1052 | if (cinfo->fint < 1000000) | ||
1053 | f = 0x3; | ||
1054 | else if (cinfo->fint < 1250000) | ||
1055 | f = 0x4; | ||
1056 | else if (cinfo->fint < 1500000) | ||
1057 | f = 0x5; | ||
1058 | else if (cinfo->fint < 1750000) | ||
1059 | f = 0x6; | ||
1060 | else | ||
1061 | f = 0x7; | ||
1062 | |||
1063 | l = dsi_read_reg(DSI_PLL_CONFIGURATION2); | ||
1064 | l = FLD_MOD(l, f, 4, 1); /* DSI_PLL_FREQSEL */ | ||
1065 | l = FLD_MOD(l, cinfo->use_dss2_fck ? 0 : 1, | ||
1066 | 11, 11); /* DSI_PLL_CLKSEL */ | ||
1067 | l = FLD_MOD(l, cinfo->highfreq, | ||
1068 | 12, 12); /* DSI_PLL_HIGHFREQ */ | ||
1069 | l = FLD_MOD(l, 1, 13, 13); /* DSI_PLL_REFEN */ | ||
1070 | l = FLD_MOD(l, 0, 14, 14); /* DSIPHY_CLKINEN */ | ||
1071 | l = FLD_MOD(l, 1, 20, 20); /* DSI_HSDIVBYPASS */ | ||
1072 | dsi_write_reg(DSI_PLL_CONFIGURATION2, l); | ||
1073 | |||
1074 | REG_FLD_MOD(DSI_PLL_GO, 1, 0, 0); /* DSI_PLL_GO */ | ||
1075 | |||
1076 | if (wait_for_bit_change(DSI_PLL_GO, 0, 0) != 0) { | ||
1077 | DSSERR("dsi pll go bit not going down.\n"); | ||
1078 | r = -EIO; | ||
1079 | goto err; | ||
1080 | } | ||
1081 | |||
1082 | if (wait_for_bit_change(DSI_PLL_STATUS, 1, 1) != 1) { | ||
1083 | DSSERR("cannot lock PLL\n"); | ||
1084 | r = -EIO; | ||
1085 | goto err; | ||
1086 | } | ||
1087 | |||
1088 | dsi.pll_locked = 1; | ||
1089 | |||
1090 | l = dsi_read_reg(DSI_PLL_CONFIGURATION2); | ||
1091 | l = FLD_MOD(l, 0, 0, 0); /* DSI_PLL_IDLE */ | ||
1092 | l = FLD_MOD(l, 0, 5, 5); /* DSI_PLL_PLLLPMODE */ | ||
1093 | l = FLD_MOD(l, 0, 6, 6); /* DSI_PLL_LOWCURRSTBY */ | ||
1094 | l = FLD_MOD(l, 0, 7, 7); /* DSI_PLL_TIGHTPHASELOCK */ | ||
1095 | l = FLD_MOD(l, 0, 8, 8); /* DSI_PLL_DRIFTGUARDEN */ | ||
1096 | l = FLD_MOD(l, 0, 10, 9); /* DSI_PLL_LOCKSEL */ | ||
1097 | l = FLD_MOD(l, 1, 13, 13); /* DSI_PLL_REFEN */ | ||
1098 | l = FLD_MOD(l, 1, 14, 14); /* DSIPHY_CLKINEN */ | ||
1099 | l = FLD_MOD(l, 0, 15, 15); /* DSI_BYPASSEN */ | ||
1100 | l = FLD_MOD(l, 1, 16, 16); /* DSS_CLOCK_EN */ | ||
1101 | l = FLD_MOD(l, 0, 17, 17); /* DSS_CLOCK_PWDN */ | ||
1102 | l = FLD_MOD(l, 1, 18, 18); /* DSI_PROTO_CLOCK_EN */ | ||
1103 | l = FLD_MOD(l, 0, 19, 19); /* DSI_PROTO_CLOCK_PWDN */ | ||
1104 | l = FLD_MOD(l, 0, 20, 20); /* DSI_HSDIVBYPASS */ | ||
1105 | dsi_write_reg(DSI_PLL_CONFIGURATION2, l); | ||
1106 | |||
1107 | DSSDBG("PLL config done\n"); | ||
1108 | err: | ||
1109 | return r; | ||
1110 | } | ||
1111 | |||
1112 | int dsi_pll_init(struct omap_dss_device *dssdev, bool enable_hsclk, | ||
1113 | bool enable_hsdiv) | ||
1114 | { | ||
1115 | int r = 0; | ||
1116 | enum dsi_pll_power_state pwstate; | ||
1117 | |||
1118 | DSSDBG("PLL init\n"); | ||
1119 | |||
1120 | enable_clocks(1); | ||
1121 | dsi_enable_pll_clock(1); | ||
1122 | |||
1123 | r = regulator_enable(dsi.vdds_dsi_reg); | ||
1124 | if (r) | ||
1125 | goto err0; | ||
1126 | |||
1127 | /* XXX PLL does not come out of reset without this... */ | ||
1128 | dispc_pck_free_enable(1); | ||
1129 | |||
1130 | if (wait_for_bit_change(DSI_PLL_STATUS, 0, 1) != 1) { | ||
1131 | DSSERR("PLL not coming out of reset.\n"); | ||
1132 | r = -ENODEV; | ||
1133 | goto err1; | ||
1134 | } | ||
1135 | |||
1136 | /* XXX ... but if left on, we get problems when planes do not | ||
1137 | * fill the whole display. No idea about this */ | ||
1138 | dispc_pck_free_enable(0); | ||
1139 | |||
1140 | if (enable_hsclk && enable_hsdiv) | ||
1141 | pwstate = DSI_PLL_POWER_ON_ALL; | ||
1142 | else if (enable_hsclk) | ||
1143 | pwstate = DSI_PLL_POWER_ON_HSCLK; | ||
1144 | else if (enable_hsdiv) | ||
1145 | pwstate = DSI_PLL_POWER_ON_DIV; | ||
1146 | else | ||
1147 | pwstate = DSI_PLL_POWER_OFF; | ||
1148 | |||
1149 | r = dsi_pll_power(pwstate); | ||
1150 | |||
1151 | if (r) | ||
1152 | goto err1; | ||
1153 | |||
1154 | DSSDBG("PLL init done\n"); | ||
1155 | |||
1156 | return 0; | ||
1157 | err1: | ||
1158 | regulator_disable(dsi.vdds_dsi_reg); | ||
1159 | err0: | ||
1160 | enable_clocks(0); | ||
1161 | dsi_enable_pll_clock(0); | ||
1162 | return r; | ||
1163 | } | ||
1164 | |||
1165 | void dsi_pll_uninit(void) | ||
1166 | { | ||
1167 | enable_clocks(0); | ||
1168 | dsi_enable_pll_clock(0); | ||
1169 | |||
1170 | dsi.pll_locked = 0; | ||
1171 | dsi_pll_power(DSI_PLL_POWER_OFF); | ||
1172 | regulator_disable(dsi.vdds_dsi_reg); | ||
1173 | DSSDBG("PLL uninit done\n"); | ||
1174 | } | ||
1175 | |||
1176 | void dsi_dump_clocks(struct seq_file *s) | ||
1177 | { | ||
1178 | int clksel; | ||
1179 | struct dsi_clock_info *cinfo = &dsi.current_cinfo; | ||
1180 | |||
1181 | enable_clocks(1); | ||
1182 | |||
1183 | clksel = REG_GET(DSI_PLL_CONFIGURATION2, 11, 11); | ||
1184 | |||
1185 | seq_printf(s, "- DSI PLL -\n"); | ||
1186 | |||
1187 | seq_printf(s, "dsi pll source = %s\n", | ||
1188 | clksel == 0 ? | ||
1189 | "dss2_alwon_fclk" : "pclkfree"); | ||
1190 | |||
1191 | seq_printf(s, "Fint\t\t%-16luregn %u\n", cinfo->fint, cinfo->regn); | ||
1192 | |||
1193 | seq_printf(s, "CLKIN4DDR\t%-16luregm %u\n", | ||
1194 | cinfo->clkin4ddr, cinfo->regm); | ||
1195 | |||
1196 | seq_printf(s, "dsi1_pll_fck\t%-16luregm3 %u\t(%s)\n", | ||
1197 | cinfo->dsi1_pll_fclk, | ||
1198 | cinfo->regm3, | ||
1199 | dss_get_dispc_clk_source() == 0 ? "off" : "on"); | ||
1200 | |||
1201 | seq_printf(s, "dsi2_pll_fck\t%-16luregm4 %u\t(%s)\n", | ||
1202 | cinfo->dsi2_pll_fclk, | ||
1203 | cinfo->regm4, | ||
1204 | dss_get_dsi_clk_source() == 0 ? "off" : "on"); | ||
1205 | |||
1206 | seq_printf(s, "- DSI -\n"); | ||
1207 | |||
1208 | seq_printf(s, "dsi fclk source = %s\n", | ||
1209 | dss_get_dsi_clk_source() == 0 ? | ||
1210 | "dss1_alwon_fclk" : "dsi2_pll_fclk"); | ||
1211 | |||
1212 | seq_printf(s, "DSI_FCLK\t%lu\n", dsi_fclk_rate()); | ||
1213 | |||
1214 | seq_printf(s, "DDR_CLK\t\t%lu\n", | ||
1215 | cinfo->clkin4ddr / 4); | ||
1216 | |||
1217 | seq_printf(s, "TxByteClkHS\t%lu\n", dsi_get_txbyteclkhs()); | ||
1218 | |||
1219 | seq_printf(s, "LP_CLK\t\t%lu\n", cinfo->lp_clk); | ||
1220 | |||
1221 | seq_printf(s, "VP_CLK\t\t%lu\n" | ||
1222 | "VP_PCLK\t\t%lu\n", | ||
1223 | dispc_lclk_rate(), | ||
1224 | dispc_pclk_rate()); | ||
1225 | |||
1226 | enable_clocks(0); | ||
1227 | } | ||
1228 | |||
1229 | void dsi_dump_regs(struct seq_file *s) | ||
1230 | { | ||
1231 | #define DUMPREG(r) seq_printf(s, "%-35s %08x\n", #r, dsi_read_reg(r)) | ||
1232 | |||
1233 | dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); | ||
1234 | |||
1235 | DUMPREG(DSI_REVISION); | ||
1236 | DUMPREG(DSI_SYSCONFIG); | ||
1237 | DUMPREG(DSI_SYSSTATUS); | ||
1238 | DUMPREG(DSI_IRQSTATUS); | ||
1239 | DUMPREG(DSI_IRQENABLE); | ||
1240 | DUMPREG(DSI_CTRL); | ||
1241 | DUMPREG(DSI_COMPLEXIO_CFG1); | ||
1242 | DUMPREG(DSI_COMPLEXIO_IRQ_STATUS); | ||
1243 | DUMPREG(DSI_COMPLEXIO_IRQ_ENABLE); | ||
1244 | DUMPREG(DSI_CLK_CTRL); | ||
1245 | DUMPREG(DSI_TIMING1); | ||
1246 | DUMPREG(DSI_TIMING2); | ||
1247 | DUMPREG(DSI_VM_TIMING1); | ||
1248 | DUMPREG(DSI_VM_TIMING2); | ||
1249 | DUMPREG(DSI_VM_TIMING3); | ||
1250 | DUMPREG(DSI_CLK_TIMING); | ||
1251 | DUMPREG(DSI_TX_FIFO_VC_SIZE); | ||
1252 | DUMPREG(DSI_RX_FIFO_VC_SIZE); | ||
1253 | DUMPREG(DSI_COMPLEXIO_CFG2); | ||
1254 | DUMPREG(DSI_RX_FIFO_VC_FULLNESS); | ||
1255 | DUMPREG(DSI_VM_TIMING4); | ||
1256 | DUMPREG(DSI_TX_FIFO_VC_EMPTINESS); | ||
1257 | DUMPREG(DSI_VM_TIMING5); | ||
1258 | DUMPREG(DSI_VM_TIMING6); | ||
1259 | DUMPREG(DSI_VM_TIMING7); | ||
1260 | DUMPREG(DSI_STOPCLK_TIMING); | ||
1261 | |||
1262 | DUMPREG(DSI_VC_CTRL(0)); | ||
1263 | DUMPREG(DSI_VC_TE(0)); | ||
1264 | DUMPREG(DSI_VC_LONG_PACKET_HEADER(0)); | ||
1265 | DUMPREG(DSI_VC_LONG_PACKET_PAYLOAD(0)); | ||
1266 | DUMPREG(DSI_VC_SHORT_PACKET_HEADER(0)); | ||
1267 | DUMPREG(DSI_VC_IRQSTATUS(0)); | ||
1268 | DUMPREG(DSI_VC_IRQENABLE(0)); | ||
1269 | |||
1270 | DUMPREG(DSI_VC_CTRL(1)); | ||
1271 | DUMPREG(DSI_VC_TE(1)); | ||
1272 | DUMPREG(DSI_VC_LONG_PACKET_HEADER(1)); | ||
1273 | DUMPREG(DSI_VC_LONG_PACKET_PAYLOAD(1)); | ||
1274 | DUMPREG(DSI_VC_SHORT_PACKET_HEADER(1)); | ||
1275 | DUMPREG(DSI_VC_IRQSTATUS(1)); | ||
1276 | DUMPREG(DSI_VC_IRQENABLE(1)); | ||
1277 | |||
1278 | DUMPREG(DSI_VC_CTRL(2)); | ||
1279 | DUMPREG(DSI_VC_TE(2)); | ||
1280 | DUMPREG(DSI_VC_LONG_PACKET_HEADER(2)); | ||
1281 | DUMPREG(DSI_VC_LONG_PACKET_PAYLOAD(2)); | ||
1282 | DUMPREG(DSI_VC_SHORT_PACKET_HEADER(2)); | ||
1283 | DUMPREG(DSI_VC_IRQSTATUS(2)); | ||
1284 | DUMPREG(DSI_VC_IRQENABLE(2)); | ||
1285 | |||
1286 | DUMPREG(DSI_VC_CTRL(3)); | ||
1287 | DUMPREG(DSI_VC_TE(3)); | ||
1288 | DUMPREG(DSI_VC_LONG_PACKET_HEADER(3)); | ||
1289 | DUMPREG(DSI_VC_LONG_PACKET_PAYLOAD(3)); | ||
1290 | DUMPREG(DSI_VC_SHORT_PACKET_HEADER(3)); | ||
1291 | DUMPREG(DSI_VC_IRQSTATUS(3)); | ||
1292 | DUMPREG(DSI_VC_IRQENABLE(3)); | ||
1293 | |||
1294 | DUMPREG(DSI_DSIPHY_CFG0); | ||
1295 | DUMPREG(DSI_DSIPHY_CFG1); | ||
1296 | DUMPREG(DSI_DSIPHY_CFG2); | ||
1297 | DUMPREG(DSI_DSIPHY_CFG5); | ||
1298 | |||
1299 | DUMPREG(DSI_PLL_CONTROL); | ||
1300 | DUMPREG(DSI_PLL_STATUS); | ||
1301 | DUMPREG(DSI_PLL_GO); | ||
1302 | DUMPREG(DSI_PLL_CONFIGURATION1); | ||
1303 | DUMPREG(DSI_PLL_CONFIGURATION2); | ||
1304 | |||
1305 | dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); | ||
1306 | #undef DUMPREG | ||
1307 | } | ||
1308 | |||
1309 | enum dsi_complexio_power_state { | ||
1310 | DSI_COMPLEXIO_POWER_OFF = 0x0, | ||
1311 | DSI_COMPLEXIO_POWER_ON = 0x1, | ||
1312 | DSI_COMPLEXIO_POWER_ULPS = 0x2, | ||
1313 | }; | ||
1314 | |||
1315 | static int dsi_complexio_power(enum dsi_complexio_power_state state) | ||
1316 | { | ||
1317 | int t = 0; | ||
1318 | |||
1319 | /* PWR_CMD */ | ||
1320 | REG_FLD_MOD(DSI_COMPLEXIO_CFG1, state, 28, 27); | ||
1321 | |||
1322 | /* PWR_STATUS */ | ||
1323 | while (FLD_GET(dsi_read_reg(DSI_COMPLEXIO_CFG1), 26, 25) != state) { | ||
1324 | udelay(1); | ||
1325 | if (t++ > 1000) { | ||
1326 | DSSERR("failed to set complexio power state to " | ||
1327 | "%d\n", state); | ||
1328 | return -ENODEV; | ||
1329 | } | ||
1330 | } | ||
1331 | |||
1332 | return 0; | ||
1333 | } | ||
1334 | |||
1335 | static void dsi_complexio_config(struct omap_dss_device *dssdev) | ||
1336 | { | ||
1337 | u32 r; | ||
1338 | |||
1339 | int clk_lane = dssdev->phy.dsi.clk_lane; | ||
1340 | int data1_lane = dssdev->phy.dsi.data1_lane; | ||
1341 | int data2_lane = dssdev->phy.dsi.data2_lane; | ||
1342 | int clk_pol = dssdev->phy.dsi.clk_pol; | ||
1343 | int data1_pol = dssdev->phy.dsi.data1_pol; | ||
1344 | int data2_pol = dssdev->phy.dsi.data2_pol; | ||
1345 | |||
1346 | r = dsi_read_reg(DSI_COMPLEXIO_CFG1); | ||
1347 | r = FLD_MOD(r, clk_lane, 2, 0); | ||
1348 | r = FLD_MOD(r, clk_pol, 3, 3); | ||
1349 | r = FLD_MOD(r, data1_lane, 6, 4); | ||
1350 | r = FLD_MOD(r, data1_pol, 7, 7); | ||
1351 | r = FLD_MOD(r, data2_lane, 10, 8); | ||
1352 | r = FLD_MOD(r, data2_pol, 11, 11); | ||
1353 | dsi_write_reg(DSI_COMPLEXIO_CFG1, r); | ||
1354 | |||
1355 | /* The configuration of the DSI complex I/O (number of data lanes, | ||
1356 | position, differential order) should not be changed while | ||
1357 | DSS.DSI_CLK_CRTRL[20] LP_CLK_ENABLE bit is set to 1. In order for | ||
1358 | the hardware to take into account a new configuration of the complex | ||
1359 | I/O (done in DSS.DSI_COMPLEXIO_CFG1 register), it is recommended to | ||
1360 | follow this sequence: First set the DSS.DSI_CTRL[0] IF_EN bit to 1, | ||
1361 | then reset the DSS.DSI_CTRL[0] IF_EN to 0, then set | ||
1362 | DSS.DSI_CLK_CTRL[20] LP_CLK_ENABLE to 1 and finally set again the | ||
1363 | DSS.DSI_CTRL[0] IF_EN bit to 1. If the sequence is not followed, the | ||
1364 | DSI complex I/O configuration is unknown. */ | ||
1365 | |||
1366 | /* | ||
1367 | REG_FLD_MOD(DSI_CTRL, 1, 0, 0); | ||
1368 | REG_FLD_MOD(DSI_CTRL, 0, 0, 0); | ||
1369 | REG_FLD_MOD(DSI_CLK_CTRL, 1, 20, 20); | ||
1370 | REG_FLD_MOD(DSI_CTRL, 1, 0, 0); | ||
1371 | */ | ||
1372 | } | ||
1373 | |||
1374 | static inline unsigned ns2ddr(unsigned ns) | ||
1375 | { | ||
1376 | /* convert time in ns to ddr ticks, rounding up */ | ||
1377 | unsigned long ddr_clk = dsi.current_cinfo.clkin4ddr / 4; | ||
1378 | return (ns * (ddr_clk / 1000 / 1000) + 999) / 1000; | ||
1379 | } | ||
1380 | |||
1381 | static inline unsigned ddr2ns(unsigned ddr) | ||
1382 | { | ||
1383 | unsigned long ddr_clk = dsi.current_cinfo.clkin4ddr / 4; | ||
1384 | return ddr * 1000 * 1000 / (ddr_clk / 1000); | ||
1385 | } | ||
1386 | |||
1387 | static void dsi_complexio_timings(void) | ||
1388 | { | ||
1389 | u32 r; | ||
1390 | u32 ths_prepare, ths_prepare_ths_zero, ths_trail, ths_exit; | ||
1391 | u32 tlpx_half, tclk_trail, tclk_zero; | ||
1392 | u32 tclk_prepare; | ||
1393 | |||
1394 | /* calculate timings */ | ||
1395 | |||
1396 | /* 1 * DDR_CLK = 2 * UI */ | ||
1397 | |||
1398 | /* min 40ns + 4*UI max 85ns + 6*UI */ | ||
1399 | ths_prepare = ns2ddr(70) + 2; | ||
1400 | |||
1401 | /* min 145ns + 10*UI */ | ||
1402 | ths_prepare_ths_zero = ns2ddr(175) + 2; | ||
1403 | |||
1404 | /* min max(8*UI, 60ns+4*UI) */ | ||
1405 | ths_trail = ns2ddr(60) + 5; | ||
1406 | |||
1407 | /* min 100ns */ | ||
1408 | ths_exit = ns2ddr(145); | ||
1409 | |||
1410 | /* tlpx min 50n */ | ||
1411 | tlpx_half = ns2ddr(25); | ||
1412 | |||
1413 | /* min 60ns */ | ||
1414 | tclk_trail = ns2ddr(60) + 2; | ||
1415 | |||
1416 | /* min 38ns, max 95ns */ | ||
1417 | tclk_prepare = ns2ddr(65); | ||
1418 | |||
1419 | /* min tclk-prepare + tclk-zero = 300ns */ | ||
1420 | tclk_zero = ns2ddr(260); | ||
1421 | |||
1422 | DSSDBG("ths_prepare %u (%uns), ths_prepare_ths_zero %u (%uns)\n", | ||
1423 | ths_prepare, ddr2ns(ths_prepare), | ||
1424 | ths_prepare_ths_zero, ddr2ns(ths_prepare_ths_zero)); | ||
1425 | DSSDBG("ths_trail %u (%uns), ths_exit %u (%uns)\n", | ||
1426 | ths_trail, ddr2ns(ths_trail), | ||
1427 | ths_exit, ddr2ns(ths_exit)); | ||
1428 | |||
1429 | DSSDBG("tlpx_half %u (%uns), tclk_trail %u (%uns), " | ||
1430 | "tclk_zero %u (%uns)\n", | ||
1431 | tlpx_half, ddr2ns(tlpx_half), | ||
1432 | tclk_trail, ddr2ns(tclk_trail), | ||
1433 | tclk_zero, ddr2ns(tclk_zero)); | ||
1434 | DSSDBG("tclk_prepare %u (%uns)\n", | ||
1435 | tclk_prepare, ddr2ns(tclk_prepare)); | ||
1436 | |||
1437 | /* program timings */ | ||
1438 | |||
1439 | r = dsi_read_reg(DSI_DSIPHY_CFG0); | ||
1440 | r = FLD_MOD(r, ths_prepare, 31, 24); | ||
1441 | r = FLD_MOD(r, ths_prepare_ths_zero, 23, 16); | ||
1442 | r = FLD_MOD(r, ths_trail, 15, 8); | ||
1443 | r = FLD_MOD(r, ths_exit, 7, 0); | ||
1444 | dsi_write_reg(DSI_DSIPHY_CFG0, r); | ||
1445 | |||
1446 | r = dsi_read_reg(DSI_DSIPHY_CFG1); | ||
1447 | r = FLD_MOD(r, tlpx_half, 22, 16); | ||
1448 | r = FLD_MOD(r, tclk_trail, 15, 8); | ||
1449 | r = FLD_MOD(r, tclk_zero, 7, 0); | ||
1450 | dsi_write_reg(DSI_DSIPHY_CFG1, r); | ||
1451 | |||
1452 | r = dsi_read_reg(DSI_DSIPHY_CFG2); | ||
1453 | r = FLD_MOD(r, tclk_prepare, 7, 0); | ||
1454 | dsi_write_reg(DSI_DSIPHY_CFG2, r); | ||
1455 | } | ||
1456 | |||
1457 | |||
1458 | static int dsi_complexio_init(struct omap_dss_device *dssdev) | ||
1459 | { | ||
1460 | int r = 0; | ||
1461 | |||
1462 | DSSDBG("dsi_complexio_init\n"); | ||
1463 | |||
1464 | /* CIO_CLK_ICG, enable L3 clk to CIO */ | ||
1465 | REG_FLD_MOD(DSI_CLK_CTRL, 1, 14, 14); | ||
1466 | |||
1467 | /* A dummy read using the SCP interface to any DSIPHY register is | ||
1468 | * required after DSIPHY reset to complete the reset of the DSI complex | ||
1469 | * I/O. */ | ||
1470 | dsi_read_reg(DSI_DSIPHY_CFG5); | ||
1471 | |||
1472 | if (wait_for_bit_change(DSI_DSIPHY_CFG5, 30, 1) != 1) { | ||
1473 | DSSERR("ComplexIO PHY not coming out of reset.\n"); | ||
1474 | r = -ENODEV; | ||
1475 | goto err; | ||
1476 | } | ||
1477 | |||
1478 | dsi_complexio_config(dssdev); | ||
1479 | |||
1480 | r = dsi_complexio_power(DSI_COMPLEXIO_POWER_ON); | ||
1481 | |||
1482 | if (r) | ||
1483 | goto err; | ||
1484 | |||
1485 | if (wait_for_bit_change(DSI_COMPLEXIO_CFG1, 29, 1) != 1) { | ||
1486 | DSSERR("ComplexIO not coming out of reset.\n"); | ||
1487 | r = -ENODEV; | ||
1488 | goto err; | ||
1489 | } | ||
1490 | |||
1491 | if (wait_for_bit_change(DSI_COMPLEXIO_CFG1, 21, 1) != 1) { | ||
1492 | DSSERR("ComplexIO LDO power down.\n"); | ||
1493 | r = -ENODEV; | ||
1494 | goto err; | ||
1495 | } | ||
1496 | |||
1497 | dsi_complexio_timings(); | ||
1498 | |||
1499 | /* | ||
1500 | The configuration of the DSI complex I/O (number of data lanes, | ||
1501 | position, differential order) should not be changed while | ||
1502 | DSS.DSI_CLK_CRTRL[20] LP_CLK_ENABLE bit is set to 1. For the | ||
1503 | hardware to recognize a new configuration of the complex I/O (done | ||
1504 | in DSS.DSI_COMPLEXIO_CFG1 register), it is recommended to follow | ||
1505 | this sequence: First set the DSS.DSI_CTRL[0] IF_EN bit to 1, next | ||
1506 | reset the DSS.DSI_CTRL[0] IF_EN to 0, then set DSS.DSI_CLK_CTRL[20] | ||
1507 | LP_CLK_ENABLE to 1, and finally, set again the DSS.DSI_CTRL[0] IF_EN | ||
1508 | bit to 1. If the sequence is not followed, the DSi complex I/O | ||
1509 | configuration is undetermined. | ||
1510 | */ | ||
1511 | dsi_if_enable(1); | ||
1512 | dsi_if_enable(0); | ||
1513 | REG_FLD_MOD(DSI_CLK_CTRL, 1, 20, 20); /* LP_CLK_ENABLE */ | ||
1514 | dsi_if_enable(1); | ||
1515 | dsi_if_enable(0); | ||
1516 | |||
1517 | DSSDBG("CIO init done\n"); | ||
1518 | err: | ||
1519 | return r; | ||
1520 | } | ||
1521 | |||
1522 | static void dsi_complexio_uninit(void) | ||
1523 | { | ||
1524 | dsi_complexio_power(DSI_COMPLEXIO_POWER_OFF); | ||
1525 | } | ||
1526 | |||
1527 | static int _dsi_wait_reset(void) | ||
1528 | { | ||
1529 | int i = 0; | ||
1530 | |||
1531 | while (REG_GET(DSI_SYSSTATUS, 0, 0) == 0) { | ||
1532 | if (i++ > 5) { | ||
1533 | DSSERR("soft reset failed\n"); | ||
1534 | return -ENODEV; | ||
1535 | } | ||
1536 | udelay(1); | ||
1537 | } | ||
1538 | |||
1539 | return 0; | ||
1540 | } | ||
1541 | |||
1542 | static int _dsi_reset(void) | ||
1543 | { | ||
1544 | /* Soft reset */ | ||
1545 | REG_FLD_MOD(DSI_SYSCONFIG, 1, 1, 1); | ||
1546 | return _dsi_wait_reset(); | ||
1547 | } | ||
1548 | |||
1549 | static void dsi_reset_tx_fifo(int channel) | ||
1550 | { | ||
1551 | u32 mask; | ||
1552 | u32 l; | ||
1553 | |||
1554 | /* set fifosize of the channel to 0, then return the old size */ | ||
1555 | l = dsi_read_reg(DSI_TX_FIFO_VC_SIZE); | ||
1556 | |||
1557 | mask = FLD_MASK((8 * channel) + 7, (8 * channel) + 4); | ||
1558 | dsi_write_reg(DSI_TX_FIFO_VC_SIZE, l & ~mask); | ||
1559 | |||
1560 | dsi_write_reg(DSI_TX_FIFO_VC_SIZE, l); | ||
1561 | } | ||
1562 | |||
1563 | static void dsi_config_tx_fifo(enum fifo_size size1, enum fifo_size size2, | ||
1564 | enum fifo_size size3, enum fifo_size size4) | ||
1565 | { | ||
1566 | u32 r = 0; | ||
1567 | int add = 0; | ||
1568 | int i; | ||
1569 | |||
1570 | dsi.vc[0].fifo_size = size1; | ||
1571 | dsi.vc[1].fifo_size = size2; | ||
1572 | dsi.vc[2].fifo_size = size3; | ||
1573 | dsi.vc[3].fifo_size = size4; | ||
1574 | |||
1575 | for (i = 0; i < 4; i++) { | ||
1576 | u8 v; | ||
1577 | int size = dsi.vc[i].fifo_size; | ||
1578 | |||
1579 | if (add + size > 4) { | ||
1580 | DSSERR("Illegal FIFO configuration\n"); | ||
1581 | BUG(); | ||
1582 | } | ||
1583 | |||
1584 | v = FLD_VAL(add, 2, 0) | FLD_VAL(size, 7, 4); | ||
1585 | r |= v << (8 * i); | ||
1586 | /*DSSDBG("TX FIFO vc %d: size %d, add %d\n", i, size, add); */ | ||
1587 | add += size; | ||
1588 | } | ||
1589 | |||
1590 | dsi_write_reg(DSI_TX_FIFO_VC_SIZE, r); | ||
1591 | } | ||
1592 | |||
1593 | static void dsi_config_rx_fifo(enum fifo_size size1, enum fifo_size size2, | ||
1594 | enum fifo_size size3, enum fifo_size size4) | ||
1595 | { | ||
1596 | u32 r = 0; | ||
1597 | int add = 0; | ||
1598 | int i; | ||
1599 | |||
1600 | dsi.vc[0].fifo_size = size1; | ||
1601 | dsi.vc[1].fifo_size = size2; | ||
1602 | dsi.vc[2].fifo_size = size3; | ||
1603 | dsi.vc[3].fifo_size = size4; | ||
1604 | |||
1605 | for (i = 0; i < 4; i++) { | ||
1606 | u8 v; | ||
1607 | int size = dsi.vc[i].fifo_size; | ||
1608 | |||
1609 | if (add + size > 4) { | ||
1610 | DSSERR("Illegal FIFO configuration\n"); | ||
1611 | BUG(); | ||
1612 | } | ||
1613 | |||
1614 | v = FLD_VAL(add, 2, 0) | FLD_VAL(size, 7, 4); | ||
1615 | r |= v << (8 * i); | ||
1616 | /*DSSDBG("RX FIFO vc %d: size %d, add %d\n", i, size, add); */ | ||
1617 | add += size; | ||
1618 | } | ||
1619 | |||
1620 | dsi_write_reg(DSI_RX_FIFO_VC_SIZE, r); | ||
1621 | } | ||
1622 | |||
1623 | static int dsi_force_tx_stop_mode_io(void) | ||
1624 | { | ||
1625 | u32 r; | ||
1626 | |||
1627 | r = dsi_read_reg(DSI_TIMING1); | ||
1628 | r = FLD_MOD(r, 1, 15, 15); /* FORCE_TX_STOP_MODE_IO */ | ||
1629 | dsi_write_reg(DSI_TIMING1, r); | ||
1630 | |||
1631 | if (wait_for_bit_change(DSI_TIMING1, 15, 0) != 0) { | ||
1632 | DSSERR("TX_STOP bit not going down\n"); | ||
1633 | return -EIO; | ||
1634 | } | ||
1635 | |||
1636 | return 0; | ||
1637 | } | ||
1638 | |||
1639 | static void dsi_vc_print_status(int channel) | ||
1640 | { | ||
1641 | u32 r; | ||
1642 | |||
1643 | r = dsi_read_reg(DSI_VC_CTRL(channel)); | ||
1644 | DSSDBG("vc %d: TX_FIFO_NOT_EMPTY %d, BTA_EN %d, VC_BUSY %d, " | ||
1645 | "TX_FIFO_FULL %d, RX_FIFO_NOT_EMPTY %d, ", | ||
1646 | channel, | ||
1647 | FLD_GET(r, 5, 5), | ||
1648 | FLD_GET(r, 6, 6), | ||
1649 | FLD_GET(r, 15, 15), | ||
1650 | FLD_GET(r, 16, 16), | ||
1651 | FLD_GET(r, 20, 20)); | ||
1652 | |||
1653 | r = dsi_read_reg(DSI_TX_FIFO_VC_EMPTINESS); | ||
1654 | DSSDBG("EMPTINESS %d\n", (r >> (8 * channel)) & 0xff); | ||
1655 | } | ||
1656 | |||
1657 | static int dsi_vc_enable(int channel, bool enable) | ||
1658 | { | ||
1659 | if (dsi.update_mode != OMAP_DSS_UPDATE_AUTO) | ||
1660 | DSSDBG("dsi_vc_enable channel %d, enable %d\n", | ||
1661 | channel, enable); | ||
1662 | |||
1663 | enable = enable ? 1 : 0; | ||
1664 | |||
1665 | REG_FLD_MOD(DSI_VC_CTRL(channel), enable, 0, 0); | ||
1666 | |||
1667 | if (wait_for_bit_change(DSI_VC_CTRL(channel), 0, enable) != enable) { | ||
1668 | DSSERR("Failed to set dsi_vc_enable to %d\n", enable); | ||
1669 | return -EIO; | ||
1670 | } | ||
1671 | |||
1672 | return 0; | ||
1673 | } | ||
1674 | |||
1675 | static void dsi_vc_initial_config(int channel) | ||
1676 | { | ||
1677 | u32 r; | ||
1678 | |||
1679 | DSSDBGF("%d", channel); | ||
1680 | |||
1681 | r = dsi_read_reg(DSI_VC_CTRL(channel)); | ||
1682 | |||
1683 | if (FLD_GET(r, 15, 15)) /* VC_BUSY */ | ||
1684 | DSSERR("VC(%d) busy when trying to configure it!\n", | ||
1685 | channel); | ||
1686 | |||
1687 | r = FLD_MOD(r, 0, 1, 1); /* SOURCE, 0 = L4 */ | ||
1688 | r = FLD_MOD(r, 0, 2, 2); /* BTA_SHORT_EN */ | ||
1689 | r = FLD_MOD(r, 0, 3, 3); /* BTA_LONG_EN */ | ||
1690 | r = FLD_MOD(r, 0, 4, 4); /* MODE, 0 = command */ | ||
1691 | r = FLD_MOD(r, 1, 7, 7); /* CS_TX_EN */ | ||
1692 | r = FLD_MOD(r, 1, 8, 8); /* ECC_TX_EN */ | ||
1693 | r = FLD_MOD(r, 0, 9, 9); /* MODE_SPEED, high speed on/off */ | ||
1694 | |||
1695 | r = FLD_MOD(r, 4, 29, 27); /* DMA_RX_REQ_NB = no dma */ | ||
1696 | r = FLD_MOD(r, 4, 23, 21); /* DMA_TX_REQ_NB = no dma */ | ||
1697 | |||
1698 | dsi_write_reg(DSI_VC_CTRL(channel), r); | ||
1699 | |||
1700 | dsi.vc[channel].mode = DSI_VC_MODE_L4; | ||
1701 | } | ||
1702 | |||
1703 | static void dsi_vc_config_l4(int channel) | ||
1704 | { | ||
1705 | if (dsi.vc[channel].mode == DSI_VC_MODE_L4) | ||
1706 | return; | ||
1707 | |||
1708 | DSSDBGF("%d", channel); | ||
1709 | |||
1710 | dsi_vc_enable(channel, 0); | ||
1711 | |||
1712 | if (REG_GET(DSI_VC_CTRL(channel), 15, 15)) /* VC_BUSY */ | ||
1713 | DSSERR("vc(%d) busy when trying to config for L4\n", channel); | ||
1714 | |||
1715 | REG_FLD_MOD(DSI_VC_CTRL(channel), 0, 1, 1); /* SOURCE, 0 = L4 */ | ||
1716 | |||
1717 | dsi_vc_enable(channel, 1); | ||
1718 | |||
1719 | dsi.vc[channel].mode = DSI_VC_MODE_L4; | ||
1720 | } | ||
1721 | |||
1722 | static void dsi_vc_config_vp(int channel) | ||
1723 | { | ||
1724 | if (dsi.vc[channel].mode == DSI_VC_MODE_VP) | ||
1725 | return; | ||
1726 | |||
1727 | DSSDBGF("%d", channel); | ||
1728 | |||
1729 | dsi_vc_enable(channel, 0); | ||
1730 | |||
1731 | if (REG_GET(DSI_VC_CTRL(channel), 15, 15)) /* VC_BUSY */ | ||
1732 | DSSERR("vc(%d) busy when trying to config for VP\n", channel); | ||
1733 | |||
1734 | REG_FLD_MOD(DSI_VC_CTRL(channel), 1, 1, 1); /* SOURCE, 1 = video port */ | ||
1735 | |||
1736 | dsi_vc_enable(channel, 1); | ||
1737 | |||
1738 | dsi.vc[channel].mode = DSI_VC_MODE_VP; | ||
1739 | } | ||
1740 | |||
1741 | |||
1742 | static void dsi_vc_enable_hs(int channel, bool enable) | ||
1743 | { | ||
1744 | DSSDBG("dsi_vc_enable_hs(%d, %d)\n", channel, enable); | ||
1745 | |||
1746 | dsi_vc_enable(channel, 0); | ||
1747 | dsi_if_enable(0); | ||
1748 | |||
1749 | REG_FLD_MOD(DSI_VC_CTRL(channel), enable, 9, 9); | ||
1750 | |||
1751 | dsi_vc_enable(channel, 1); | ||
1752 | dsi_if_enable(1); | ||
1753 | |||
1754 | dsi_force_tx_stop_mode_io(); | ||
1755 | } | ||
1756 | |||
1757 | static void dsi_vc_flush_long_data(int channel) | ||
1758 | { | ||
1759 | while (REG_GET(DSI_VC_CTRL(channel), 20, 20)) { | ||
1760 | u32 val; | ||
1761 | val = dsi_read_reg(DSI_VC_SHORT_PACKET_HEADER(channel)); | ||
1762 | DSSDBG("\t\tb1 %#02x b2 %#02x b3 %#02x b4 %#02x\n", | ||
1763 | (val >> 0) & 0xff, | ||
1764 | (val >> 8) & 0xff, | ||
1765 | (val >> 16) & 0xff, | ||
1766 | (val >> 24) & 0xff); | ||
1767 | } | ||
1768 | } | ||
1769 | |||
1770 | static void dsi_show_rx_ack_with_err(u16 err) | ||
1771 | { | ||
1772 | DSSERR("\tACK with ERROR (%#x):\n", err); | ||
1773 | if (err & (1 << 0)) | ||
1774 | DSSERR("\t\tSoT Error\n"); | ||
1775 | if (err & (1 << 1)) | ||
1776 | DSSERR("\t\tSoT Sync Error\n"); | ||
1777 | if (err & (1 << 2)) | ||
1778 | DSSERR("\t\tEoT Sync Error\n"); | ||
1779 | if (err & (1 << 3)) | ||
1780 | DSSERR("\t\tEscape Mode Entry Command Error\n"); | ||
1781 | if (err & (1 << 4)) | ||
1782 | DSSERR("\t\tLP Transmit Sync Error\n"); | ||
1783 | if (err & (1 << 5)) | ||
1784 | DSSERR("\t\tHS Receive Timeout Error\n"); | ||
1785 | if (err & (1 << 6)) | ||
1786 | DSSERR("\t\tFalse Control Error\n"); | ||
1787 | if (err & (1 << 7)) | ||
1788 | DSSERR("\t\t(reserved7)\n"); | ||
1789 | if (err & (1 << 8)) | ||
1790 | DSSERR("\t\tECC Error, single-bit (corrected)\n"); | ||
1791 | if (err & (1 << 9)) | ||
1792 | DSSERR("\t\tECC Error, multi-bit (not corrected)\n"); | ||
1793 | if (err & (1 << 10)) | ||
1794 | DSSERR("\t\tChecksum Error\n"); | ||
1795 | if (err & (1 << 11)) | ||
1796 | DSSERR("\t\tData type not recognized\n"); | ||
1797 | if (err & (1 << 12)) | ||
1798 | DSSERR("\t\tInvalid VC ID\n"); | ||
1799 | if (err & (1 << 13)) | ||
1800 | DSSERR("\t\tInvalid Transmission Length\n"); | ||
1801 | if (err & (1 << 14)) | ||
1802 | DSSERR("\t\t(reserved14)\n"); | ||
1803 | if (err & (1 << 15)) | ||
1804 | DSSERR("\t\tDSI Protocol Violation\n"); | ||
1805 | } | ||
1806 | |||
1807 | static u16 dsi_vc_flush_receive_data(int channel) | ||
1808 | { | ||
1809 | /* RX_FIFO_NOT_EMPTY */ | ||
1810 | while (REG_GET(DSI_VC_CTRL(channel), 20, 20)) { | ||
1811 | u32 val; | ||
1812 | u8 dt; | ||
1813 | val = dsi_read_reg(DSI_VC_SHORT_PACKET_HEADER(channel)); | ||
1814 | DSSDBG("\trawval %#08x\n", val); | ||
1815 | dt = FLD_GET(val, 5, 0); | ||
1816 | if (dt == DSI_DT_RX_ACK_WITH_ERR) { | ||
1817 | u16 err = FLD_GET(val, 23, 8); | ||
1818 | dsi_show_rx_ack_with_err(err); | ||
1819 | } else if (dt == DSI_DT_RX_SHORT_READ_1) { | ||
1820 | DSSDBG("\tDCS short response, 1 byte: %#x\n", | ||
1821 | FLD_GET(val, 23, 8)); | ||
1822 | } else if (dt == DSI_DT_RX_SHORT_READ_2) { | ||
1823 | DSSDBG("\tDCS short response, 2 byte: %#x\n", | ||
1824 | FLD_GET(val, 23, 8)); | ||
1825 | } else if (dt == DSI_DT_RX_DCS_LONG_READ) { | ||
1826 | DSSDBG("\tDCS long response, len %d\n", | ||
1827 | FLD_GET(val, 23, 8)); | ||
1828 | dsi_vc_flush_long_data(channel); | ||
1829 | } else { | ||
1830 | DSSERR("\tunknown datatype 0x%02x\n", dt); | ||
1831 | } | ||
1832 | } | ||
1833 | return 0; | ||
1834 | } | ||
1835 | |||
1836 | static int dsi_vc_send_bta(int channel) | ||
1837 | { | ||
1838 | if (dsi.update_mode != OMAP_DSS_UPDATE_AUTO && | ||
1839 | (dsi.debug_write || dsi.debug_read)) | ||
1840 | DSSDBG("dsi_vc_send_bta %d\n", channel); | ||
1841 | |||
1842 | WARN_ON(!mutex_is_locked(&dsi.bus_lock)); | ||
1843 | |||
1844 | if (REG_GET(DSI_VC_CTRL(channel), 20, 20)) { /* RX_FIFO_NOT_EMPTY */ | ||
1845 | DSSERR("rx fifo not empty when sending BTA, dumping data:\n"); | ||
1846 | dsi_vc_flush_receive_data(channel); | ||
1847 | } | ||
1848 | |||
1849 | REG_FLD_MOD(DSI_VC_CTRL(channel), 1, 6, 6); /* BTA_EN */ | ||
1850 | |||
1851 | return 0; | ||
1852 | } | ||
1853 | |||
1854 | int dsi_vc_send_bta_sync(int channel) | ||
1855 | { | ||
1856 | int r = 0; | ||
1857 | u32 err; | ||
1858 | |||
1859 | INIT_COMPLETION(dsi.bta_completion); | ||
1860 | |||
1861 | dsi_vc_enable_bta_irq(channel); | ||
1862 | |||
1863 | r = dsi_vc_send_bta(channel); | ||
1864 | if (r) | ||
1865 | goto err; | ||
1866 | |||
1867 | if (wait_for_completion_timeout(&dsi.bta_completion, | ||
1868 | msecs_to_jiffies(500)) == 0) { | ||
1869 | DSSERR("Failed to receive BTA\n"); | ||
1870 | r = -EIO; | ||
1871 | goto err; | ||
1872 | } | ||
1873 | |||
1874 | err = dsi_get_errors(); | ||
1875 | if (err) { | ||
1876 | DSSERR("Error while sending BTA: %x\n", err); | ||
1877 | r = -EIO; | ||
1878 | goto err; | ||
1879 | } | ||
1880 | err: | ||
1881 | dsi_vc_disable_bta_irq(channel); | ||
1882 | |||
1883 | return r; | ||
1884 | } | ||
1885 | EXPORT_SYMBOL(dsi_vc_send_bta_sync); | ||
1886 | |||
1887 | static inline void dsi_vc_write_long_header(int channel, u8 data_type, | ||
1888 | u16 len, u8 ecc) | ||
1889 | { | ||
1890 | u32 val; | ||
1891 | u8 data_id; | ||
1892 | |||
1893 | WARN_ON(!mutex_is_locked(&dsi.bus_lock)); | ||
1894 | |||
1895 | /*data_id = data_type | channel << 6; */ | ||
1896 | data_id = data_type | dsi.vc[channel].dest_per << 6; | ||
1897 | |||
1898 | val = FLD_VAL(data_id, 7, 0) | FLD_VAL(len, 23, 8) | | ||
1899 | FLD_VAL(ecc, 31, 24); | ||
1900 | |||
1901 | dsi_write_reg(DSI_VC_LONG_PACKET_HEADER(channel), val); | ||
1902 | } | ||
1903 | |||
1904 | static inline void dsi_vc_write_long_payload(int channel, | ||
1905 | u8 b1, u8 b2, u8 b3, u8 b4) | ||
1906 | { | ||
1907 | u32 val; | ||
1908 | |||
1909 | val = b4 << 24 | b3 << 16 | b2 << 8 | b1 << 0; | ||
1910 | |||
1911 | /* DSSDBG("\twriting %02x, %02x, %02x, %02x (%#010x)\n", | ||
1912 | b1, b2, b3, b4, val); */ | ||
1913 | |||
1914 | dsi_write_reg(DSI_VC_LONG_PACKET_PAYLOAD(channel), val); | ||
1915 | } | ||
1916 | |||
1917 | static int dsi_vc_send_long(int channel, u8 data_type, u8 *data, u16 len, | ||
1918 | u8 ecc) | ||
1919 | { | ||
1920 | /*u32 val; */ | ||
1921 | int i; | ||
1922 | u8 *p; | ||
1923 | int r = 0; | ||
1924 | u8 b1, b2, b3, b4; | ||
1925 | |||
1926 | if (dsi.debug_write) | ||
1927 | DSSDBG("dsi_vc_send_long, %d bytes\n", len); | ||
1928 | |||
1929 | /* len + header */ | ||
1930 | if (dsi.vc[channel].fifo_size * 32 * 4 < len + 4) { | ||
1931 | DSSERR("unable to send long packet: packet too long.\n"); | ||
1932 | return -EINVAL; | ||
1933 | } | ||
1934 | |||
1935 | dsi_vc_config_l4(channel); | ||
1936 | |||
1937 | dsi_vc_write_long_header(channel, data_type, len, ecc); | ||
1938 | |||
1939 | /*dsi_vc_print_status(0); */ | ||
1940 | |||
1941 | p = data; | ||
1942 | for (i = 0; i < len >> 2; i++) { | ||
1943 | if (dsi.debug_write) | ||
1944 | DSSDBG("\tsending full packet %d\n", i); | ||
1945 | /*dsi_vc_print_status(0); */ | ||
1946 | |||
1947 | b1 = *p++; | ||
1948 | b2 = *p++; | ||
1949 | b3 = *p++; | ||
1950 | b4 = *p++; | ||
1951 | |||
1952 | dsi_vc_write_long_payload(channel, b1, b2, b3, b4); | ||
1953 | } | ||
1954 | |||
1955 | i = len % 4; | ||
1956 | if (i) { | ||
1957 | b1 = 0; b2 = 0; b3 = 0; | ||
1958 | |||
1959 | if (dsi.debug_write) | ||
1960 | DSSDBG("\tsending remainder bytes %d\n", i); | ||
1961 | |||
1962 | switch (i) { | ||
1963 | case 3: | ||
1964 | b1 = *p++; | ||
1965 | b2 = *p++; | ||
1966 | b3 = *p++; | ||
1967 | break; | ||
1968 | case 2: | ||
1969 | b1 = *p++; | ||
1970 | b2 = *p++; | ||
1971 | break; | ||
1972 | case 1: | ||
1973 | b1 = *p++; | ||
1974 | break; | ||
1975 | } | ||
1976 | |||
1977 | dsi_vc_write_long_payload(channel, b1, b2, b3, 0); | ||
1978 | } | ||
1979 | |||
1980 | return r; | ||
1981 | } | ||
1982 | |||
1983 | static int dsi_vc_send_short(int channel, u8 data_type, u16 data, u8 ecc) | ||
1984 | { | ||
1985 | u32 r; | ||
1986 | u8 data_id; | ||
1987 | |||
1988 | WARN_ON(!mutex_is_locked(&dsi.bus_lock)); | ||
1989 | |||
1990 | if (dsi.debug_write) | ||
1991 | DSSDBG("dsi_vc_send_short(ch%d, dt %#x, b1 %#x, b2 %#x)\n", | ||
1992 | channel, | ||
1993 | data_type, data & 0xff, (data >> 8) & 0xff); | ||
1994 | |||
1995 | dsi_vc_config_l4(channel); | ||
1996 | |||
1997 | if (FLD_GET(dsi_read_reg(DSI_VC_CTRL(channel)), 16, 16)) { | ||
1998 | DSSERR("ERROR FIFO FULL, aborting transfer\n"); | ||
1999 | return -EINVAL; | ||
2000 | } | ||
2001 | |||
2002 | data_id = data_type | channel << 6; | ||
2003 | |||
2004 | r = (data_id << 0) | (data << 8) | (ecc << 24); | ||
2005 | |||
2006 | dsi_write_reg(DSI_VC_SHORT_PACKET_HEADER(channel), r); | ||
2007 | |||
2008 | return 0; | ||
2009 | } | ||
2010 | |||
2011 | int dsi_vc_send_null(int channel) | ||
2012 | { | ||
2013 | u8 nullpkg[] = {0, 0, 0, 0}; | ||
2014 | return dsi_vc_send_long(0, DSI_DT_NULL_PACKET, nullpkg, 4, 0); | ||
2015 | } | ||
2016 | EXPORT_SYMBOL(dsi_vc_send_null); | ||
2017 | |||
2018 | int dsi_vc_dcs_write_nosync(int channel, u8 *data, int len) | ||
2019 | { | ||
2020 | int r; | ||
2021 | |||
2022 | BUG_ON(len == 0); | ||
2023 | |||
2024 | if (len == 1) { | ||
2025 | r = dsi_vc_send_short(channel, DSI_DT_DCS_SHORT_WRITE_0, | ||
2026 | data[0], 0); | ||
2027 | } else if (len == 2) { | ||
2028 | r = dsi_vc_send_short(channel, DSI_DT_DCS_SHORT_WRITE_1, | ||
2029 | data[0] | (data[1] << 8), 0); | ||
2030 | } else { | ||
2031 | /* 0x39 = DCS Long Write */ | ||
2032 | r = dsi_vc_send_long(channel, DSI_DT_DCS_LONG_WRITE, | ||
2033 | data, len, 0); | ||
2034 | } | ||
2035 | |||
2036 | return r; | ||
2037 | } | ||
2038 | EXPORT_SYMBOL(dsi_vc_dcs_write_nosync); | ||
2039 | |||
2040 | int dsi_vc_dcs_write(int channel, u8 *data, int len) | ||
2041 | { | ||
2042 | int r; | ||
2043 | |||
2044 | r = dsi_vc_dcs_write_nosync(channel, data, len); | ||
2045 | if (r) | ||
2046 | return r; | ||
2047 | |||
2048 | r = dsi_vc_send_bta_sync(channel); | ||
2049 | |||
2050 | return r; | ||
2051 | } | ||
2052 | EXPORT_SYMBOL(dsi_vc_dcs_write); | ||
2053 | |||
2054 | int dsi_vc_dcs_read(int channel, u8 dcs_cmd, u8 *buf, int buflen) | ||
2055 | { | ||
2056 | u32 val; | ||
2057 | u8 dt; | ||
2058 | int r; | ||
2059 | |||
2060 | if (dsi.debug_read) | ||
2061 | DSSDBG("dsi_vc_dcs_read(ch%d, dcs_cmd %u)\n", channel, dcs_cmd); | ||
2062 | |||
2063 | r = dsi_vc_send_short(channel, DSI_DT_DCS_READ, dcs_cmd, 0); | ||
2064 | if (r) | ||
2065 | return r; | ||
2066 | |||
2067 | r = dsi_vc_send_bta_sync(channel); | ||
2068 | if (r) | ||
2069 | return r; | ||
2070 | |||
2071 | /* RX_FIFO_NOT_EMPTY */ | ||
2072 | if (REG_GET(DSI_VC_CTRL(channel), 20, 20) == 0) { | ||
2073 | DSSERR("RX fifo empty when trying to read.\n"); | ||
2074 | return -EIO; | ||
2075 | } | ||
2076 | |||
2077 | val = dsi_read_reg(DSI_VC_SHORT_PACKET_HEADER(channel)); | ||
2078 | if (dsi.debug_read) | ||
2079 | DSSDBG("\theader: %08x\n", val); | ||
2080 | dt = FLD_GET(val, 5, 0); | ||
2081 | if (dt == DSI_DT_RX_ACK_WITH_ERR) { | ||
2082 | u16 err = FLD_GET(val, 23, 8); | ||
2083 | dsi_show_rx_ack_with_err(err); | ||
2084 | return -EIO; | ||
2085 | |||
2086 | } else if (dt == DSI_DT_RX_SHORT_READ_1) { | ||
2087 | u8 data = FLD_GET(val, 15, 8); | ||
2088 | if (dsi.debug_read) | ||
2089 | DSSDBG("\tDCS short response, 1 byte: %02x\n", data); | ||
2090 | |||
2091 | if (buflen < 1) | ||
2092 | return -EIO; | ||
2093 | |||
2094 | buf[0] = data; | ||
2095 | |||
2096 | return 1; | ||
2097 | } else if (dt == DSI_DT_RX_SHORT_READ_2) { | ||
2098 | u16 data = FLD_GET(val, 23, 8); | ||
2099 | if (dsi.debug_read) | ||
2100 | DSSDBG("\tDCS short response, 2 byte: %04x\n", data); | ||
2101 | |||
2102 | if (buflen < 2) | ||
2103 | return -EIO; | ||
2104 | |||
2105 | buf[0] = data & 0xff; | ||
2106 | buf[1] = (data >> 8) & 0xff; | ||
2107 | |||
2108 | return 2; | ||
2109 | } else if (dt == DSI_DT_RX_DCS_LONG_READ) { | ||
2110 | int w; | ||
2111 | int len = FLD_GET(val, 23, 8); | ||
2112 | if (dsi.debug_read) | ||
2113 | DSSDBG("\tDCS long response, len %d\n", len); | ||
2114 | |||
2115 | if (len > buflen) | ||
2116 | return -EIO; | ||
2117 | |||
2118 | /* two byte checksum ends the packet, not included in len */ | ||
2119 | for (w = 0; w < len + 2;) { | ||
2120 | int b; | ||
2121 | val = dsi_read_reg(DSI_VC_SHORT_PACKET_HEADER(channel)); | ||
2122 | if (dsi.debug_read) | ||
2123 | DSSDBG("\t\t%02x %02x %02x %02x\n", | ||
2124 | (val >> 0) & 0xff, | ||
2125 | (val >> 8) & 0xff, | ||
2126 | (val >> 16) & 0xff, | ||
2127 | (val >> 24) & 0xff); | ||
2128 | |||
2129 | for (b = 0; b < 4; ++b) { | ||
2130 | if (w < len) | ||
2131 | buf[w] = (val >> (b * 8)) & 0xff; | ||
2132 | /* we discard the 2 byte checksum */ | ||
2133 | ++w; | ||
2134 | } | ||
2135 | } | ||
2136 | |||
2137 | return len; | ||
2138 | |||
2139 | } else { | ||
2140 | DSSERR("\tunknown datatype 0x%02x\n", dt); | ||
2141 | return -EIO; | ||
2142 | } | ||
2143 | } | ||
2144 | EXPORT_SYMBOL(dsi_vc_dcs_read); | ||
2145 | |||
2146 | |||
2147 | int dsi_vc_set_max_rx_packet_size(int channel, u16 len) | ||
2148 | { | ||
2149 | int r; | ||
2150 | r = dsi_vc_send_short(channel, DSI_DT_SET_MAX_RET_PKG_SIZE, | ||
2151 | len, 0); | ||
2152 | |||
2153 | if (r) | ||
2154 | return r; | ||
2155 | |||
2156 | r = dsi_vc_send_bta_sync(channel); | ||
2157 | |||
2158 | return r; | ||
2159 | } | ||
2160 | EXPORT_SYMBOL(dsi_vc_set_max_rx_packet_size); | ||
2161 | |||
2162 | static void dsi_set_lp_rx_timeout(unsigned long ns) | ||
2163 | { | ||
2164 | u32 r; | ||
2165 | unsigned x4, x16; | ||
2166 | unsigned long fck; | ||
2167 | unsigned long ticks; | ||
2168 | |||
2169 | /* ticks in DSI_FCK */ | ||
2170 | |||
2171 | fck = dsi_fclk_rate(); | ||
2172 | ticks = (fck / 1000 / 1000) * ns / 1000; | ||
2173 | x4 = 0; | ||
2174 | x16 = 0; | ||
2175 | |||
2176 | if (ticks > 0x1fff) { | ||
2177 | ticks = (fck / 1000 / 1000) * ns / 1000 / 4; | ||
2178 | x4 = 1; | ||
2179 | x16 = 0; | ||
2180 | } | ||
2181 | |||
2182 | if (ticks > 0x1fff) { | ||
2183 | ticks = (fck / 1000 / 1000) * ns / 1000 / 16; | ||
2184 | x4 = 0; | ||
2185 | x16 = 1; | ||
2186 | } | ||
2187 | |||
2188 | if (ticks > 0x1fff) { | ||
2189 | ticks = (fck / 1000 / 1000) * ns / 1000 / (4 * 16); | ||
2190 | x4 = 1; | ||
2191 | x16 = 1; | ||
2192 | } | ||
2193 | |||
2194 | if (ticks > 0x1fff) { | ||
2195 | DSSWARN("LP_TX_TO over limit, setting it to max\n"); | ||
2196 | ticks = 0x1fff; | ||
2197 | x4 = 1; | ||
2198 | x16 = 1; | ||
2199 | } | ||
2200 | |||
2201 | r = dsi_read_reg(DSI_TIMING2); | ||
2202 | r = FLD_MOD(r, 1, 15, 15); /* LP_RX_TO */ | ||
2203 | r = FLD_MOD(r, x16, 14, 14); /* LP_RX_TO_X16 */ | ||
2204 | r = FLD_MOD(r, x4, 13, 13); /* LP_RX_TO_X4 */ | ||
2205 | r = FLD_MOD(r, ticks, 12, 0); /* LP_RX_COUNTER */ | ||
2206 | dsi_write_reg(DSI_TIMING2, r); | ||
2207 | |||
2208 | DSSDBG("LP_RX_TO %lu ns (%#lx ticks%s%s)\n", | ||
2209 | (ticks * (x16 ? 16 : 1) * (x4 ? 4 : 1) * 1000) / | ||
2210 | (fck / 1000 / 1000), | ||
2211 | ticks, x4 ? " x4" : "", x16 ? " x16" : ""); | ||
2212 | } | ||
2213 | |||
2214 | static void dsi_set_ta_timeout(unsigned long ns) | ||
2215 | { | ||
2216 | u32 r; | ||
2217 | unsigned x8, x16; | ||
2218 | unsigned long fck; | ||
2219 | unsigned long ticks; | ||
2220 | |||
2221 | /* ticks in DSI_FCK */ | ||
2222 | fck = dsi_fclk_rate(); | ||
2223 | ticks = (fck / 1000 / 1000) * ns / 1000; | ||
2224 | x8 = 0; | ||
2225 | x16 = 0; | ||
2226 | |||
2227 | if (ticks > 0x1fff) { | ||
2228 | ticks = (fck / 1000 / 1000) * ns / 1000 / 8; | ||
2229 | x8 = 1; | ||
2230 | x16 = 0; | ||
2231 | } | ||
2232 | |||
2233 | if (ticks > 0x1fff) { | ||
2234 | ticks = (fck / 1000 / 1000) * ns / 1000 / 16; | ||
2235 | x8 = 0; | ||
2236 | x16 = 1; | ||
2237 | } | ||
2238 | |||
2239 | if (ticks > 0x1fff) { | ||
2240 | ticks = (fck / 1000 / 1000) * ns / 1000 / (8 * 16); | ||
2241 | x8 = 1; | ||
2242 | x16 = 1; | ||
2243 | } | ||
2244 | |||
2245 | if (ticks > 0x1fff) { | ||
2246 | DSSWARN("TA_TO over limit, setting it to max\n"); | ||
2247 | ticks = 0x1fff; | ||
2248 | x8 = 1; | ||
2249 | x16 = 1; | ||
2250 | } | ||
2251 | |||
2252 | r = dsi_read_reg(DSI_TIMING1); | ||
2253 | r = FLD_MOD(r, 1, 31, 31); /* TA_TO */ | ||
2254 | r = FLD_MOD(r, x16, 30, 30); /* TA_TO_X16 */ | ||
2255 | r = FLD_MOD(r, x8, 29, 29); /* TA_TO_X8 */ | ||
2256 | r = FLD_MOD(r, ticks, 28, 16); /* TA_TO_COUNTER */ | ||
2257 | dsi_write_reg(DSI_TIMING1, r); | ||
2258 | |||
2259 | DSSDBG("TA_TO %lu ns (%#lx ticks%s%s)\n", | ||
2260 | (ticks * (x16 ? 16 : 1) * (x8 ? 8 : 1) * 1000) / | ||
2261 | (fck / 1000 / 1000), | ||
2262 | ticks, x8 ? " x8" : "", x16 ? " x16" : ""); | ||
2263 | } | ||
2264 | |||
2265 | static void dsi_set_stop_state_counter(unsigned long ns) | ||
2266 | { | ||
2267 | u32 r; | ||
2268 | unsigned x4, x16; | ||
2269 | unsigned long fck; | ||
2270 | unsigned long ticks; | ||
2271 | |||
2272 | /* ticks in DSI_FCK */ | ||
2273 | |||
2274 | fck = dsi_fclk_rate(); | ||
2275 | ticks = (fck / 1000 / 1000) * ns / 1000; | ||
2276 | x4 = 0; | ||
2277 | x16 = 0; | ||
2278 | |||
2279 | if (ticks > 0x1fff) { | ||
2280 | ticks = (fck / 1000 / 1000) * ns / 1000 / 4; | ||
2281 | x4 = 1; | ||
2282 | x16 = 0; | ||
2283 | } | ||
2284 | |||
2285 | if (ticks > 0x1fff) { | ||
2286 | ticks = (fck / 1000 / 1000) * ns / 1000 / 16; | ||
2287 | x4 = 0; | ||
2288 | x16 = 1; | ||
2289 | } | ||
2290 | |||
2291 | if (ticks > 0x1fff) { | ||
2292 | ticks = (fck / 1000 / 1000) * ns / 1000 / (4 * 16); | ||
2293 | x4 = 1; | ||
2294 | x16 = 1; | ||
2295 | } | ||
2296 | |||
2297 | if (ticks > 0x1fff) { | ||
2298 | DSSWARN("STOP_STATE_COUNTER_IO over limit, " | ||
2299 | "setting it to max\n"); | ||
2300 | ticks = 0x1fff; | ||
2301 | x4 = 1; | ||
2302 | x16 = 1; | ||
2303 | } | ||
2304 | |||
2305 | r = dsi_read_reg(DSI_TIMING1); | ||
2306 | r = FLD_MOD(r, 1, 15, 15); /* FORCE_TX_STOP_MODE_IO */ | ||
2307 | r = FLD_MOD(r, x16, 14, 14); /* STOP_STATE_X16_IO */ | ||
2308 | r = FLD_MOD(r, x4, 13, 13); /* STOP_STATE_X4_IO */ | ||
2309 | r = FLD_MOD(r, ticks, 12, 0); /* STOP_STATE_COUNTER_IO */ | ||
2310 | dsi_write_reg(DSI_TIMING1, r); | ||
2311 | |||
2312 | DSSDBG("STOP_STATE_COUNTER %lu ns (%#lx ticks%s%s)\n", | ||
2313 | (ticks * (x16 ? 16 : 1) * (x4 ? 4 : 1) * 1000) / | ||
2314 | (fck / 1000 / 1000), | ||
2315 | ticks, x4 ? " x4" : "", x16 ? " x16" : ""); | ||
2316 | } | ||
2317 | |||
2318 | static void dsi_set_hs_tx_timeout(unsigned long ns) | ||
2319 | { | ||
2320 | u32 r; | ||
2321 | unsigned x4, x16; | ||
2322 | unsigned long fck; | ||
2323 | unsigned long ticks; | ||
2324 | |||
2325 | /* ticks in TxByteClkHS */ | ||
2326 | |||
2327 | fck = dsi_get_txbyteclkhs(); | ||
2328 | ticks = (fck / 1000 / 1000) * ns / 1000; | ||
2329 | x4 = 0; | ||
2330 | x16 = 0; | ||
2331 | |||
2332 | if (ticks > 0x1fff) { | ||
2333 | ticks = (fck / 1000 / 1000) * ns / 1000 / 4; | ||
2334 | x4 = 1; | ||
2335 | x16 = 0; | ||
2336 | } | ||
2337 | |||
2338 | if (ticks > 0x1fff) { | ||
2339 | ticks = (fck / 1000 / 1000) * ns / 1000 / 16; | ||
2340 | x4 = 0; | ||
2341 | x16 = 1; | ||
2342 | } | ||
2343 | |||
2344 | if (ticks > 0x1fff) { | ||
2345 | ticks = (fck / 1000 / 1000) * ns / 1000 / (4 * 16); | ||
2346 | x4 = 1; | ||
2347 | x16 = 1; | ||
2348 | } | ||
2349 | |||
2350 | if (ticks > 0x1fff) { | ||
2351 | DSSWARN("HS_TX_TO over limit, setting it to max\n"); | ||
2352 | ticks = 0x1fff; | ||
2353 | x4 = 1; | ||
2354 | x16 = 1; | ||
2355 | } | ||
2356 | |||
2357 | r = dsi_read_reg(DSI_TIMING2); | ||
2358 | r = FLD_MOD(r, 1, 31, 31); /* HS_TX_TO */ | ||
2359 | r = FLD_MOD(r, x16, 30, 30); /* HS_TX_TO_X16 */ | ||
2360 | r = FLD_MOD(r, x4, 29, 29); /* HS_TX_TO_X8 (4 really) */ | ||
2361 | r = FLD_MOD(r, ticks, 28, 16); /* HS_TX_TO_COUNTER */ | ||
2362 | dsi_write_reg(DSI_TIMING2, r); | ||
2363 | |||
2364 | DSSDBG("HS_TX_TO %lu ns (%#lx ticks%s%s)\n", | ||
2365 | (ticks * (x16 ? 16 : 1) * (x4 ? 4 : 1) * 1000) / | ||
2366 | (fck / 1000 / 1000), | ||
2367 | ticks, x4 ? " x4" : "", x16 ? " x16" : ""); | ||
2368 | } | ||
2369 | static int dsi_proto_config(struct omap_dss_device *dssdev) | ||
2370 | { | ||
2371 | u32 r; | ||
2372 | int buswidth = 0; | ||
2373 | |||
2374 | dsi_config_tx_fifo(DSI_FIFO_SIZE_128, | ||
2375 | DSI_FIFO_SIZE_0, | ||
2376 | DSI_FIFO_SIZE_0, | ||
2377 | DSI_FIFO_SIZE_0); | ||
2378 | |||
2379 | dsi_config_rx_fifo(DSI_FIFO_SIZE_128, | ||
2380 | DSI_FIFO_SIZE_0, | ||
2381 | DSI_FIFO_SIZE_0, | ||
2382 | DSI_FIFO_SIZE_0); | ||
2383 | |||
2384 | /* XXX what values for the timeouts? */ | ||
2385 | dsi_set_stop_state_counter(1000); | ||
2386 | dsi_set_ta_timeout(6400000); | ||
2387 | dsi_set_lp_rx_timeout(48000); | ||
2388 | dsi_set_hs_tx_timeout(1000000); | ||
2389 | |||
2390 | switch (dssdev->ctrl.pixel_size) { | ||
2391 | case 16: | ||
2392 | buswidth = 0; | ||
2393 | break; | ||
2394 | case 18: | ||
2395 | buswidth = 1; | ||
2396 | break; | ||
2397 | case 24: | ||
2398 | buswidth = 2; | ||
2399 | break; | ||
2400 | default: | ||
2401 | BUG(); | ||
2402 | } | ||
2403 | |||
2404 | r = dsi_read_reg(DSI_CTRL); | ||
2405 | r = FLD_MOD(r, 1, 1, 1); /* CS_RX_EN */ | ||
2406 | r = FLD_MOD(r, 1, 2, 2); /* ECC_RX_EN */ | ||
2407 | r = FLD_MOD(r, 1, 3, 3); /* TX_FIFO_ARBITRATION */ | ||
2408 | r = FLD_MOD(r, 1, 4, 4); /* VP_CLK_RATIO, always 1, see errata*/ | ||
2409 | r = FLD_MOD(r, buswidth, 7, 6); /* VP_DATA_BUS_WIDTH */ | ||
2410 | r = FLD_MOD(r, 0, 8, 8); /* VP_CLK_POL */ | ||
2411 | r = FLD_MOD(r, 2, 13, 12); /* LINE_BUFFER, 2 lines */ | ||
2412 | r = FLD_MOD(r, 1, 14, 14); /* TRIGGER_RESET_MODE */ | ||
2413 | r = FLD_MOD(r, 1, 19, 19); /* EOT_ENABLE */ | ||
2414 | r = FLD_MOD(r, 1, 24, 24); /* DCS_CMD_ENABLE */ | ||
2415 | r = FLD_MOD(r, 0, 25, 25); /* DCS_CMD_CODE, 1=start, 0=continue */ | ||
2416 | |||
2417 | dsi_write_reg(DSI_CTRL, r); | ||
2418 | |||
2419 | dsi_vc_initial_config(0); | ||
2420 | |||
2421 | /* set all vc targets to peripheral 0 */ | ||
2422 | dsi.vc[0].dest_per = 0; | ||
2423 | dsi.vc[1].dest_per = 0; | ||
2424 | dsi.vc[2].dest_per = 0; | ||
2425 | dsi.vc[3].dest_per = 0; | ||
2426 | |||
2427 | return 0; | ||
2428 | } | ||
2429 | |||
2430 | static void dsi_proto_timings(struct omap_dss_device *dssdev) | ||
2431 | { | ||
2432 | unsigned tlpx, tclk_zero, tclk_prepare, tclk_trail; | ||
2433 | unsigned tclk_pre, tclk_post; | ||
2434 | unsigned ths_prepare, ths_prepare_ths_zero, ths_zero; | ||
2435 | unsigned ths_trail, ths_exit; | ||
2436 | unsigned ddr_clk_pre, ddr_clk_post; | ||
2437 | unsigned enter_hs_mode_lat, exit_hs_mode_lat; | ||
2438 | unsigned ths_eot; | ||
2439 | u32 r; | ||
2440 | |||
2441 | r = dsi_read_reg(DSI_DSIPHY_CFG0); | ||
2442 | ths_prepare = FLD_GET(r, 31, 24); | ||
2443 | ths_prepare_ths_zero = FLD_GET(r, 23, 16); | ||
2444 | ths_zero = ths_prepare_ths_zero - ths_prepare; | ||
2445 | ths_trail = FLD_GET(r, 15, 8); | ||
2446 | ths_exit = FLD_GET(r, 7, 0); | ||
2447 | |||
2448 | r = dsi_read_reg(DSI_DSIPHY_CFG1); | ||
2449 | tlpx = FLD_GET(r, 22, 16) * 2; | ||
2450 | tclk_trail = FLD_GET(r, 15, 8); | ||
2451 | tclk_zero = FLD_GET(r, 7, 0); | ||
2452 | |||
2453 | r = dsi_read_reg(DSI_DSIPHY_CFG2); | ||
2454 | tclk_prepare = FLD_GET(r, 7, 0); | ||
2455 | |||
2456 | /* min 8*UI */ | ||
2457 | tclk_pre = 20; | ||
2458 | /* min 60ns + 52*UI */ | ||
2459 | tclk_post = ns2ddr(60) + 26; | ||
2460 | |||
2461 | /* ths_eot is 2 for 2 datalanes and 4 for 1 datalane */ | ||
2462 | if (dssdev->phy.dsi.data1_lane != 0 && | ||
2463 | dssdev->phy.dsi.data2_lane != 0) | ||
2464 | ths_eot = 2; | ||
2465 | else | ||
2466 | ths_eot = 4; | ||
2467 | |||
2468 | ddr_clk_pre = DIV_ROUND_UP(tclk_pre + tlpx + tclk_zero + tclk_prepare, | ||
2469 | 4); | ||
2470 | ddr_clk_post = DIV_ROUND_UP(tclk_post + ths_trail, 4) + ths_eot; | ||
2471 | |||
2472 | BUG_ON(ddr_clk_pre == 0 || ddr_clk_pre > 255); | ||
2473 | BUG_ON(ddr_clk_post == 0 || ddr_clk_post > 255); | ||
2474 | |||
2475 | r = dsi_read_reg(DSI_CLK_TIMING); | ||
2476 | r = FLD_MOD(r, ddr_clk_pre, 15, 8); | ||
2477 | r = FLD_MOD(r, ddr_clk_post, 7, 0); | ||
2478 | dsi_write_reg(DSI_CLK_TIMING, r); | ||
2479 | |||
2480 | DSSDBG("ddr_clk_pre %u, ddr_clk_post %u\n", | ||
2481 | ddr_clk_pre, | ||
2482 | ddr_clk_post); | ||
2483 | |||
2484 | enter_hs_mode_lat = 1 + DIV_ROUND_UP(tlpx, 4) + | ||
2485 | DIV_ROUND_UP(ths_prepare, 4) + | ||
2486 | DIV_ROUND_UP(ths_zero + 3, 4); | ||
2487 | |||
2488 | exit_hs_mode_lat = DIV_ROUND_UP(ths_trail + ths_exit, 4) + 1 + ths_eot; | ||
2489 | |||
2490 | r = FLD_VAL(enter_hs_mode_lat, 31, 16) | | ||
2491 | FLD_VAL(exit_hs_mode_lat, 15, 0); | ||
2492 | dsi_write_reg(DSI_VM_TIMING7, r); | ||
2493 | |||
2494 | DSSDBG("enter_hs_mode_lat %u, exit_hs_mode_lat %u\n", | ||
2495 | enter_hs_mode_lat, exit_hs_mode_lat); | ||
2496 | } | ||
2497 | |||
2498 | |||
2499 | #define DSI_DECL_VARS \ | ||
2500 | int __dsi_cb = 0; u32 __dsi_cv = 0; | ||
2501 | |||
2502 | #define DSI_FLUSH(ch) \ | ||
2503 | if (__dsi_cb > 0) { \ | ||
2504 | /*DSSDBG("sending long packet %#010x\n", __dsi_cv);*/ \ | ||
2505 | dsi_write_reg(DSI_VC_LONG_PACKET_PAYLOAD(ch), __dsi_cv); \ | ||
2506 | __dsi_cb = __dsi_cv = 0; \ | ||
2507 | } | ||
2508 | |||
2509 | #define DSI_PUSH(ch, data) \ | ||
2510 | do { \ | ||
2511 | __dsi_cv |= (data) << (__dsi_cb * 8); \ | ||
2512 | /*DSSDBG("cv = %#010x, cb = %d\n", __dsi_cv, __dsi_cb);*/ \ | ||
2513 | if (++__dsi_cb > 3) \ | ||
2514 | DSI_FLUSH(ch); \ | ||
2515 | } while (0) | ||
2516 | |||
2517 | static int dsi_update_screen_l4(struct omap_dss_device *dssdev, | ||
2518 | int x, int y, int w, int h) | ||
2519 | { | ||
2520 | /* Note: supports only 24bit colors in 32bit container */ | ||
2521 | int first = 1; | ||
2522 | int fifo_stalls = 0; | ||
2523 | int max_dsi_packet_size; | ||
2524 | int max_data_per_packet; | ||
2525 | int max_pixels_per_packet; | ||
2526 | int pixels_left; | ||
2527 | int bytespp = dssdev->ctrl.pixel_size / 8; | ||
2528 | int scr_width; | ||
2529 | u32 __iomem *data; | ||
2530 | int start_offset; | ||
2531 | int horiz_inc; | ||
2532 | int current_x; | ||
2533 | struct omap_overlay *ovl; | ||
2534 | |||
2535 | debug_irq = 0; | ||
2536 | |||
2537 | DSSDBG("dsi_update_screen_l4 (%d,%d %dx%d)\n", | ||
2538 | x, y, w, h); | ||
2539 | |||
2540 | ovl = dssdev->manager->overlays[0]; | ||
2541 | |||
2542 | if (ovl->info.color_mode != OMAP_DSS_COLOR_RGB24U) | ||
2543 | return -EINVAL; | ||
2544 | |||
2545 | if (dssdev->ctrl.pixel_size != 24) | ||
2546 | return -EINVAL; | ||
2547 | |||
2548 | scr_width = ovl->info.screen_width; | ||
2549 | data = ovl->info.vaddr; | ||
2550 | |||
2551 | start_offset = scr_width * y + x; | ||
2552 | horiz_inc = scr_width - w; | ||
2553 | current_x = x; | ||
2554 | |||
2555 | /* We need header(4) + DCSCMD(1) + pixels(numpix*bytespp) bytes | ||
2556 | * in fifo */ | ||
2557 | |||
2558 | /* When using CPU, max long packet size is TX buffer size */ | ||
2559 | max_dsi_packet_size = dsi.vc[0].fifo_size * 32 * 4; | ||
2560 | |||
2561 | /* we seem to get better perf if we divide the tx fifo to half, | ||
2562 | and while the other half is being sent, we fill the other half | ||
2563 | max_dsi_packet_size /= 2; */ | ||
2564 | |||
2565 | max_data_per_packet = max_dsi_packet_size - 4 - 1; | ||
2566 | |||
2567 | max_pixels_per_packet = max_data_per_packet / bytespp; | ||
2568 | |||
2569 | DSSDBG("max_pixels_per_packet %d\n", max_pixels_per_packet); | ||
2570 | |||
2571 | pixels_left = w * h; | ||
2572 | |||
2573 | DSSDBG("total pixels %d\n", pixels_left); | ||
2574 | |||
2575 | data += start_offset; | ||
2576 | |||
2577 | while (pixels_left > 0) { | ||
2578 | /* 0x2c = write_memory_start */ | ||
2579 | /* 0x3c = write_memory_continue */ | ||
2580 | u8 dcs_cmd = first ? 0x2c : 0x3c; | ||
2581 | int pixels; | ||
2582 | DSI_DECL_VARS; | ||
2583 | first = 0; | ||
2584 | |||
2585 | #if 1 | ||
2586 | /* using fifo not empty */ | ||
2587 | /* TX_FIFO_NOT_EMPTY */ | ||
2588 | while (FLD_GET(dsi_read_reg(DSI_VC_CTRL(0)), 5, 5)) { | ||
2589 | udelay(1); | ||
2590 | fifo_stalls++; | ||
2591 | if (fifo_stalls > 0xfffff) { | ||
2592 | DSSERR("fifo stalls overflow, pixels left %d\n", | ||
2593 | pixels_left); | ||
2594 | dsi_if_enable(0); | ||
2595 | return -EIO; | ||
2596 | } | ||
2597 | } | ||
2598 | #elif 1 | ||
2599 | /* using fifo emptiness */ | ||
2600 | while ((REG_GET(DSI_TX_FIFO_VC_EMPTINESS, 7, 0)+1)*4 < | ||
2601 | max_dsi_packet_size) { | ||
2602 | fifo_stalls++; | ||
2603 | if (fifo_stalls > 0xfffff) { | ||
2604 | DSSERR("fifo stalls overflow, pixels left %d\n", | ||
2605 | pixels_left); | ||
2606 | dsi_if_enable(0); | ||
2607 | return -EIO; | ||
2608 | } | ||
2609 | } | ||
2610 | #else | ||
2611 | while ((REG_GET(DSI_TX_FIFO_VC_EMPTINESS, 7, 0)+1)*4 == 0) { | ||
2612 | fifo_stalls++; | ||
2613 | if (fifo_stalls > 0xfffff) { | ||
2614 | DSSERR("fifo stalls overflow, pixels left %d\n", | ||
2615 | pixels_left); | ||
2616 | dsi_if_enable(0); | ||
2617 | return -EIO; | ||
2618 | } | ||
2619 | } | ||
2620 | #endif | ||
2621 | pixels = min(max_pixels_per_packet, pixels_left); | ||
2622 | |||
2623 | pixels_left -= pixels; | ||
2624 | |||
2625 | dsi_vc_write_long_header(0, DSI_DT_DCS_LONG_WRITE, | ||
2626 | 1 + pixels * bytespp, 0); | ||
2627 | |||
2628 | DSI_PUSH(0, dcs_cmd); | ||
2629 | |||
2630 | while (pixels-- > 0) { | ||
2631 | u32 pix = __raw_readl(data++); | ||
2632 | |||
2633 | DSI_PUSH(0, (pix >> 16) & 0xff); | ||
2634 | DSI_PUSH(0, (pix >> 8) & 0xff); | ||
2635 | DSI_PUSH(0, (pix >> 0) & 0xff); | ||
2636 | |||
2637 | current_x++; | ||
2638 | if (current_x == x+w) { | ||
2639 | current_x = x; | ||
2640 | data += horiz_inc; | ||
2641 | } | ||
2642 | } | ||
2643 | |||
2644 | DSI_FLUSH(0); | ||
2645 | } | ||
2646 | |||
2647 | return 0; | ||
2648 | } | ||
2649 | |||
2650 | static void dsi_update_screen_dispc(struct omap_dss_device *dssdev, | ||
2651 | u16 x, u16 y, u16 w, u16 h) | ||
2652 | { | ||
2653 | unsigned bytespp; | ||
2654 | unsigned bytespl; | ||
2655 | unsigned bytespf; | ||
2656 | unsigned total_len; | ||
2657 | unsigned packet_payload; | ||
2658 | unsigned packet_len; | ||
2659 | u32 l; | ||
2660 | bool use_te_trigger; | ||
2661 | const unsigned channel = 0; | ||
2662 | /* line buffer is 1024 x 24bits */ | ||
2663 | /* XXX: for some reason using full buffer size causes considerable TX | ||
2664 | * slowdown with update sizes that fill the whole buffer */ | ||
2665 | const unsigned line_buf_size = 1023 * 3; | ||
2666 | |||
2667 | use_te_trigger = dsi.te_enabled && !dsi.use_ext_te; | ||
2668 | |||
2669 | if (dsi.update_mode != OMAP_DSS_UPDATE_AUTO) | ||
2670 | DSSDBG("dsi_update_screen_dispc(%d,%d %dx%d)\n", | ||
2671 | x, y, w, h); | ||
2672 | |||
2673 | bytespp = dssdev->ctrl.pixel_size / 8; | ||
2674 | bytespl = w * bytespp; | ||
2675 | bytespf = bytespl * h; | ||
2676 | |||
2677 | /* NOTE: packet_payload has to be equal to N * bytespl, where N is | ||
2678 | * number of lines in a packet. See errata about VP_CLK_RATIO */ | ||
2679 | |||
2680 | if (bytespf < line_buf_size) | ||
2681 | packet_payload = bytespf; | ||
2682 | else | ||
2683 | packet_payload = (line_buf_size) / bytespl * bytespl; | ||
2684 | |||
2685 | packet_len = packet_payload + 1; /* 1 byte for DCS cmd */ | ||
2686 | total_len = (bytespf / packet_payload) * packet_len; | ||
2687 | |||
2688 | if (bytespf % packet_payload) | ||
2689 | total_len += (bytespf % packet_payload) + 1; | ||
2690 | |||
2691 | if (0) | ||
2692 | dsi_vc_print_status(1); | ||
2693 | |||
2694 | l = FLD_VAL(total_len, 23, 0); /* TE_SIZE */ | ||
2695 | dsi_write_reg(DSI_VC_TE(channel), l); | ||
2696 | |||
2697 | dsi_vc_write_long_header(channel, DSI_DT_DCS_LONG_WRITE, packet_len, 0); | ||
2698 | |||
2699 | if (use_te_trigger) | ||
2700 | l = FLD_MOD(l, 1, 30, 30); /* TE_EN */ | ||
2701 | else | ||
2702 | l = FLD_MOD(l, 1, 31, 31); /* TE_START */ | ||
2703 | dsi_write_reg(DSI_VC_TE(channel), l); | ||
2704 | |||
2705 | /* We put SIDLEMODE to no-idle for the duration of the transfer, | ||
2706 | * because DSS interrupts are not capable of waking up the CPU and the | ||
2707 | * framedone interrupt could be delayed for quite a long time. I think | ||
2708 | * the same goes for any DSS interrupts, but for some reason I have not | ||
2709 | * seen the problem anywhere else than here. | ||
2710 | */ | ||
2711 | dispc_disable_sidle(); | ||
2712 | |||
2713 | dss_start_update(dssdev); | ||
2714 | |||
2715 | if (use_te_trigger) { | ||
2716 | /* disable LP_RX_TO, so that we can receive TE. Time to wait | ||
2717 | * for TE is longer than the timer allows */ | ||
2718 | REG_FLD_MOD(DSI_TIMING2, 0, 15, 15); /* LP_RX_TO */ | ||
2719 | |||
2720 | dsi_vc_send_bta(channel); | ||
2721 | |||
2722 | #ifdef DSI_CATCH_MISSING_TE | ||
2723 | mod_timer(&dsi.te_timer, jiffies + msecs_to_jiffies(250)); | ||
2724 | #endif | ||
2725 | } | ||
2726 | } | ||
2727 | |||
2728 | #ifdef DSI_CATCH_MISSING_TE | ||
2729 | static void dsi_te_timeout(unsigned long arg) | ||
2730 | { | ||
2731 | DSSERR("TE not received for 250ms!\n"); | ||
2732 | } | ||
2733 | #endif | ||
2734 | |||
2735 | static void dsi_framedone_irq_callback(void *data, u32 mask) | ||
2736 | { | ||
2737 | /* Note: We get FRAMEDONE when DISPC has finished sending pixels and | ||
2738 | * turns itself off. However, DSI still has the pixels in its buffers, | ||
2739 | * and is sending the data. | ||
2740 | */ | ||
2741 | |||
2742 | /* SIDLEMODE back to smart-idle */ | ||
2743 | dispc_enable_sidle(); | ||
2744 | |||
2745 | dsi.framedone_received = true; | ||
2746 | wake_up(&dsi.waitqueue); | ||
2747 | } | ||
2748 | |||
2749 | static void dsi_set_update_region(struct omap_dss_device *dssdev, | ||
2750 | u16 x, u16 y, u16 w, u16 h) | ||
2751 | { | ||
2752 | spin_lock(&dsi.update_lock); | ||
2753 | if (dsi.update_region.dirty) { | ||
2754 | dsi.update_region.x = min(x, dsi.update_region.x); | ||
2755 | dsi.update_region.y = min(y, dsi.update_region.y); | ||
2756 | dsi.update_region.w = max(w, dsi.update_region.w); | ||
2757 | dsi.update_region.h = max(h, dsi.update_region.h); | ||
2758 | } else { | ||
2759 | dsi.update_region.x = x; | ||
2760 | dsi.update_region.y = y; | ||
2761 | dsi.update_region.w = w; | ||
2762 | dsi.update_region.h = h; | ||
2763 | } | ||
2764 | |||
2765 | dsi.update_region.device = dssdev; | ||
2766 | dsi.update_region.dirty = true; | ||
2767 | |||
2768 | spin_unlock(&dsi.update_lock); | ||
2769 | |||
2770 | } | ||
2771 | |||
2772 | static int dsi_set_update_mode(struct omap_dss_device *dssdev, | ||
2773 | enum omap_dss_update_mode mode) | ||
2774 | { | ||
2775 | int r = 0; | ||
2776 | int i; | ||
2777 | |||
2778 | WARN_ON(!mutex_is_locked(&dsi.bus_lock)); | ||
2779 | |||
2780 | if (dsi.update_mode != mode) { | ||
2781 | dsi.update_mode = mode; | ||
2782 | |||
2783 | /* Mark the overlays dirty, and do apply(), so that we get the | ||
2784 | * overlays configured properly after update mode change. */ | ||
2785 | for (i = 0; i < omap_dss_get_num_overlays(); ++i) { | ||
2786 | struct omap_overlay *ovl; | ||
2787 | ovl = omap_dss_get_overlay(i); | ||
2788 | if (ovl->manager == dssdev->manager) | ||
2789 | ovl->info_dirty = true; | ||
2790 | } | ||
2791 | |||
2792 | r = dssdev->manager->apply(dssdev->manager); | ||
2793 | |||
2794 | if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE && | ||
2795 | mode == OMAP_DSS_UPDATE_AUTO) { | ||
2796 | u16 w, h; | ||
2797 | |||
2798 | DSSDBG("starting auto update\n"); | ||
2799 | |||
2800 | dssdev->get_resolution(dssdev, &w, &h); | ||
2801 | |||
2802 | dsi_set_update_region(dssdev, 0, 0, w, h); | ||
2803 | |||
2804 | dsi_perf_mark_start_auto(); | ||
2805 | |||
2806 | wake_up(&dsi.waitqueue); | ||
2807 | } | ||
2808 | } | ||
2809 | |||
2810 | return r; | ||
2811 | } | ||
2812 | |||
2813 | static int dsi_set_te(struct omap_dss_device *dssdev, bool enable) | ||
2814 | { | ||
2815 | int r; | ||
2816 | r = dssdev->driver->enable_te(dssdev, enable); | ||
2817 | /* XXX for some reason, DSI TE breaks if we don't wait here. | ||
2818 | * Panel bug? Needs more studying */ | ||
2819 | msleep(100); | ||
2820 | return r; | ||
2821 | } | ||
2822 | |||
2823 | static void dsi_handle_framedone(void) | ||
2824 | { | ||
2825 | int r; | ||
2826 | const int channel = 0; | ||
2827 | bool use_te_trigger; | ||
2828 | |||
2829 | use_te_trigger = dsi.te_enabled && !dsi.use_ext_te; | ||
2830 | |||
2831 | if (dsi.update_mode != OMAP_DSS_UPDATE_AUTO) | ||
2832 | DSSDBG("FRAMEDONE\n"); | ||
2833 | |||
2834 | if (use_te_trigger) { | ||
2835 | /* enable LP_RX_TO again after the TE */ | ||
2836 | REG_FLD_MOD(DSI_TIMING2, 1, 15, 15); /* LP_RX_TO */ | ||
2837 | } | ||
2838 | |||
2839 | /* Send BTA after the frame. We need this for the TE to work, as TE | ||
2840 | * trigger is only sent for BTAs without preceding packet. Thus we need | ||
2841 | * to BTA after the pixel packets so that next BTA will cause TE | ||
2842 | * trigger. | ||
2843 | * | ||
2844 | * This is not needed when TE is not in use, but we do it anyway to | ||
2845 | * make sure that the transfer has been completed. It would be more | ||
2846 | * optimal, but more complex, to wait only just before starting next | ||
2847 | * transfer. */ | ||
2848 | r = dsi_vc_send_bta_sync(channel); | ||
2849 | if (r) | ||
2850 | DSSERR("BTA after framedone failed\n"); | ||
2851 | |||
2852 | /* RX_FIFO_NOT_EMPTY */ | ||
2853 | if (REG_GET(DSI_VC_CTRL(channel), 20, 20)) { | ||
2854 | DSSERR("Received error during frame transfer:\n"); | ||
2855 | dsi_vc_flush_receive_data(0); | ||
2856 | } | ||
2857 | |||
2858 | #ifdef CONFIG_OMAP2_DSS_FAKE_VSYNC | ||
2859 | dispc_fake_vsync_irq(); | ||
2860 | #endif | ||
2861 | } | ||
2862 | |||
2863 | static int dsi_update_thread(void *data) | ||
2864 | { | ||
2865 | unsigned long timeout; | ||
2866 | struct omap_dss_device *device; | ||
2867 | u16 x, y, w, h; | ||
2868 | |||
2869 | while (1) { | ||
2870 | bool sched; | ||
2871 | |||
2872 | wait_event_interruptible(dsi.waitqueue, | ||
2873 | dsi.update_mode == OMAP_DSS_UPDATE_AUTO || | ||
2874 | (dsi.update_mode == OMAP_DSS_UPDATE_MANUAL && | ||
2875 | dsi.update_region.dirty == true) || | ||
2876 | kthread_should_stop()); | ||
2877 | |||
2878 | if (kthread_should_stop()) | ||
2879 | break; | ||
2880 | |||
2881 | dsi_bus_lock(); | ||
2882 | |||
2883 | if (dsi.update_mode == OMAP_DSS_UPDATE_DISABLED || | ||
2884 | kthread_should_stop()) { | ||
2885 | dsi_bus_unlock(); | ||
2886 | break; | ||
2887 | } | ||
2888 | |||
2889 | dsi_perf_mark_setup(); | ||
2890 | |||
2891 | if (dsi.update_region.dirty) { | ||
2892 | spin_lock(&dsi.update_lock); | ||
2893 | dsi.active_update_region = dsi.update_region; | ||
2894 | dsi.update_region.dirty = false; | ||
2895 | spin_unlock(&dsi.update_lock); | ||
2896 | } | ||
2897 | |||
2898 | device = dsi.active_update_region.device; | ||
2899 | x = dsi.active_update_region.x; | ||
2900 | y = dsi.active_update_region.y; | ||
2901 | w = dsi.active_update_region.w; | ||
2902 | h = dsi.active_update_region.h; | ||
2903 | |||
2904 | if (device->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) { | ||
2905 | |||
2906 | if (dsi.update_mode == OMAP_DSS_UPDATE_MANUAL) | ||
2907 | dss_setup_partial_planes(device, | ||
2908 | &x, &y, &w, &h); | ||
2909 | |||
2910 | dispc_set_lcd_size(w, h); | ||
2911 | } | ||
2912 | |||
2913 | if (dsi.active_update_region.dirty) { | ||
2914 | dsi.active_update_region.dirty = false; | ||
2915 | /* XXX TODO we don't need to send the coords, if they | ||
2916 | * are the same that are already programmed to the | ||
2917 | * panel. That should speed up manual update a bit */ | ||
2918 | device->driver->setup_update(device, x, y, w, h); | ||
2919 | } | ||
2920 | |||
2921 | dsi_perf_mark_start(); | ||
2922 | |||
2923 | if (device->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) { | ||
2924 | dsi_vc_config_vp(0); | ||
2925 | |||
2926 | if (dsi.te_enabled && dsi.use_ext_te) | ||
2927 | device->driver->wait_for_te(device); | ||
2928 | |||
2929 | dsi.framedone_received = false; | ||
2930 | |||
2931 | dsi_update_screen_dispc(device, x, y, w, h); | ||
2932 | |||
2933 | /* wait for framedone */ | ||
2934 | timeout = msecs_to_jiffies(1000); | ||
2935 | wait_event_timeout(dsi.waitqueue, | ||
2936 | dsi.framedone_received == true, | ||
2937 | timeout); | ||
2938 | |||
2939 | if (!dsi.framedone_received) { | ||
2940 | DSSERR("framedone timeout\n"); | ||
2941 | DSSERR("failed update %d,%d %dx%d\n", | ||
2942 | x, y, w, h); | ||
2943 | |||
2944 | dispc_enable_sidle(); | ||
2945 | dispc_enable_lcd_out(0); | ||
2946 | |||
2947 | dsi_reset_tx_fifo(0); | ||
2948 | } else { | ||
2949 | dsi_handle_framedone(); | ||
2950 | dsi_perf_show("DISPC"); | ||
2951 | } | ||
2952 | } else { | ||
2953 | dsi_update_screen_l4(device, x, y, w, h); | ||
2954 | dsi_perf_show("L4"); | ||
2955 | } | ||
2956 | |||
2957 | sched = atomic_read(&dsi.bus_lock.count) < 0; | ||
2958 | |||
2959 | complete_all(&dsi.update_completion); | ||
2960 | |||
2961 | dsi_bus_unlock(); | ||
2962 | |||
2963 | /* XXX We need to give others chance to get the bus lock. Is | ||
2964 | * there a better way for this? */ | ||
2965 | if (dsi.update_mode == OMAP_DSS_UPDATE_AUTO && sched) | ||
2966 | schedule_timeout_interruptible(1); | ||
2967 | } | ||
2968 | |||
2969 | DSSDBG("update thread exiting\n"); | ||
2970 | |||
2971 | return 0; | ||
2972 | } | ||
2973 | |||
2974 | |||
2975 | |||
2976 | /* Display funcs */ | ||
2977 | |||
2978 | static int dsi_display_init_dispc(struct omap_dss_device *dssdev) | ||
2979 | { | ||
2980 | int r; | ||
2981 | |||
2982 | r = omap_dispc_register_isr(dsi_framedone_irq_callback, NULL, | ||
2983 | DISPC_IRQ_FRAMEDONE); | ||
2984 | if (r) { | ||
2985 | DSSERR("can't get FRAMEDONE irq\n"); | ||
2986 | return r; | ||
2987 | } | ||
2988 | |||
2989 | dispc_set_lcd_display_type(OMAP_DSS_LCD_DISPLAY_TFT); | ||
2990 | |||
2991 | dispc_set_parallel_interface_mode(OMAP_DSS_PARALLELMODE_DSI); | ||
2992 | dispc_enable_fifohandcheck(1); | ||
2993 | |||
2994 | dispc_set_tft_data_lines(dssdev->ctrl.pixel_size); | ||
2995 | |||
2996 | { | ||
2997 | struct omap_video_timings timings = { | ||
2998 | .hsw = 1, | ||
2999 | .hfp = 1, | ||
3000 | .hbp = 1, | ||
3001 | .vsw = 1, | ||
3002 | .vfp = 0, | ||
3003 | .vbp = 0, | ||
3004 | }; | ||
3005 | |||
3006 | dispc_set_lcd_timings(&timings); | ||
3007 | } | ||
3008 | |||
3009 | return 0; | ||
3010 | } | ||
3011 | |||
3012 | static void dsi_display_uninit_dispc(struct omap_dss_device *dssdev) | ||
3013 | { | ||
3014 | omap_dispc_unregister_isr(dsi_framedone_irq_callback, NULL, | ||
3015 | DISPC_IRQ_FRAMEDONE); | ||
3016 | } | ||
3017 | |||
3018 | static int dsi_configure_dsi_clocks(struct omap_dss_device *dssdev) | ||
3019 | { | ||
3020 | struct dsi_clock_info cinfo; | ||
3021 | int r; | ||
3022 | |||
3023 | /* we always use DSS2_FCK as input clock */ | ||
3024 | cinfo.use_dss2_fck = true; | ||
3025 | cinfo.regn = dssdev->phy.dsi.div.regn; | ||
3026 | cinfo.regm = dssdev->phy.dsi.div.regm; | ||
3027 | cinfo.regm3 = dssdev->phy.dsi.div.regm3; | ||
3028 | cinfo.regm4 = dssdev->phy.dsi.div.regm4; | ||
3029 | r = dsi_calc_clock_rates(&cinfo); | ||
3030 | if (r) | ||
3031 | return r; | ||
3032 | |||
3033 | r = dsi_pll_set_clock_div(&cinfo); | ||
3034 | if (r) { | ||
3035 | DSSERR("Failed to set dsi clocks\n"); | ||
3036 | return r; | ||
3037 | } | ||
3038 | |||
3039 | return 0; | ||
3040 | } | ||
3041 | |||
3042 | static int dsi_configure_dispc_clocks(struct omap_dss_device *dssdev) | ||
3043 | { | ||
3044 | struct dispc_clock_info dispc_cinfo; | ||
3045 | int r; | ||
3046 | unsigned long long fck; | ||
3047 | |||
3048 | fck = dsi_get_dsi1_pll_rate(); | ||
3049 | |||
3050 | dispc_cinfo.lck_div = dssdev->phy.dsi.div.lck_div; | ||
3051 | dispc_cinfo.pck_div = dssdev->phy.dsi.div.pck_div; | ||
3052 | |||
3053 | r = dispc_calc_clock_rates(fck, &dispc_cinfo); | ||
3054 | if (r) { | ||
3055 | DSSERR("Failed to calc dispc clocks\n"); | ||
3056 | return r; | ||
3057 | } | ||
3058 | |||
3059 | r = dispc_set_clock_div(&dispc_cinfo); | ||
3060 | if (r) { | ||
3061 | DSSERR("Failed to set dispc clocks\n"); | ||
3062 | return r; | ||
3063 | } | ||
3064 | |||
3065 | return 0; | ||
3066 | } | ||
3067 | |||
3068 | static int dsi_display_init_dsi(struct omap_dss_device *dssdev) | ||
3069 | { | ||
3070 | int r; | ||
3071 | |||
3072 | _dsi_print_reset_status(); | ||
3073 | |||
3074 | r = dsi_pll_init(dssdev, true, true); | ||
3075 | if (r) | ||
3076 | goto err0; | ||
3077 | |||
3078 | r = dsi_configure_dsi_clocks(dssdev); | ||
3079 | if (r) | ||
3080 | goto err1; | ||
3081 | |||
3082 | dss_select_clk_source(true, true); | ||
3083 | |||
3084 | DSSDBG("PLL OK\n"); | ||
3085 | |||
3086 | r = dsi_configure_dispc_clocks(dssdev); | ||
3087 | if (r) | ||
3088 | goto err2; | ||
3089 | |||
3090 | r = dsi_complexio_init(dssdev); | ||
3091 | if (r) | ||
3092 | goto err2; | ||
3093 | |||
3094 | _dsi_print_reset_status(); | ||
3095 | |||
3096 | dsi_proto_timings(dssdev); | ||
3097 | dsi_set_lp_clk_divisor(dssdev); | ||
3098 | |||
3099 | if (1) | ||
3100 | _dsi_print_reset_status(); | ||
3101 | |||
3102 | r = dsi_proto_config(dssdev); | ||
3103 | if (r) | ||
3104 | goto err3; | ||
3105 | |||
3106 | /* enable interface */ | ||
3107 | dsi_vc_enable(0, 1); | ||
3108 | dsi_if_enable(1); | ||
3109 | dsi_force_tx_stop_mode_io(); | ||
3110 | |||
3111 | if (dssdev->driver->enable) { | ||
3112 | r = dssdev->driver->enable(dssdev); | ||
3113 | if (r) | ||
3114 | goto err4; | ||
3115 | } | ||
3116 | |||
3117 | /* enable high-speed after initial config */ | ||
3118 | dsi_vc_enable_hs(0, 1); | ||
3119 | |||
3120 | return 0; | ||
3121 | err4: | ||
3122 | dsi_if_enable(0); | ||
3123 | err3: | ||
3124 | dsi_complexio_uninit(); | ||
3125 | err2: | ||
3126 | dss_select_clk_source(false, false); | ||
3127 | err1: | ||
3128 | dsi_pll_uninit(); | ||
3129 | err0: | ||
3130 | return r; | ||
3131 | } | ||
3132 | |||
3133 | static void dsi_display_uninit_dsi(struct omap_dss_device *dssdev) | ||
3134 | { | ||
3135 | if (dssdev->driver->disable) | ||
3136 | dssdev->driver->disable(dssdev); | ||
3137 | |||
3138 | dss_select_clk_source(false, false); | ||
3139 | dsi_complexio_uninit(); | ||
3140 | dsi_pll_uninit(); | ||
3141 | } | ||
3142 | |||
3143 | static int dsi_core_init(void) | ||
3144 | { | ||
3145 | /* Autoidle */ | ||
3146 | REG_FLD_MOD(DSI_SYSCONFIG, 1, 0, 0); | ||
3147 | |||
3148 | /* ENWAKEUP */ | ||
3149 | REG_FLD_MOD(DSI_SYSCONFIG, 1, 2, 2); | ||
3150 | |||
3151 | /* SIDLEMODE smart-idle */ | ||
3152 | REG_FLD_MOD(DSI_SYSCONFIG, 2, 4, 3); | ||
3153 | |||
3154 | _dsi_initialize_irq(); | ||
3155 | |||
3156 | return 0; | ||
3157 | } | ||
3158 | |||
3159 | static int dsi_display_enable(struct omap_dss_device *dssdev) | ||
3160 | { | ||
3161 | int r = 0; | ||
3162 | |||
3163 | DSSDBG("dsi_display_enable\n"); | ||
3164 | |||
3165 | mutex_lock(&dsi.lock); | ||
3166 | dsi_bus_lock(); | ||
3167 | |||
3168 | r = omap_dss_start_device(dssdev); | ||
3169 | if (r) { | ||
3170 | DSSERR("failed to start device\n"); | ||
3171 | goto err0; | ||
3172 | } | ||
3173 | |||
3174 | if (dssdev->state != OMAP_DSS_DISPLAY_DISABLED) { | ||
3175 | DSSERR("dssdev already enabled\n"); | ||
3176 | r = -EINVAL; | ||
3177 | goto err1; | ||
3178 | } | ||
3179 | |||
3180 | enable_clocks(1); | ||
3181 | dsi_enable_pll_clock(1); | ||
3182 | |||
3183 | r = _dsi_reset(); | ||
3184 | if (r) | ||
3185 | goto err2; | ||
3186 | |||
3187 | dsi_core_init(); | ||
3188 | |||
3189 | r = dsi_display_init_dispc(dssdev); | ||
3190 | if (r) | ||
3191 | goto err2; | ||
3192 | |||
3193 | r = dsi_display_init_dsi(dssdev); | ||
3194 | if (r) | ||
3195 | goto err3; | ||
3196 | |||
3197 | dssdev->state = OMAP_DSS_DISPLAY_ACTIVE; | ||
3198 | |||
3199 | dsi.use_ext_te = dssdev->phy.dsi.ext_te; | ||
3200 | r = dsi_set_te(dssdev, dsi.te_enabled); | ||
3201 | if (r) | ||
3202 | goto err4; | ||
3203 | |||
3204 | dsi_set_update_mode(dssdev, dsi.user_update_mode); | ||
3205 | |||
3206 | dsi_bus_unlock(); | ||
3207 | mutex_unlock(&dsi.lock); | ||
3208 | |||
3209 | return 0; | ||
3210 | |||
3211 | err4: | ||
3212 | |||
3213 | dsi_display_uninit_dsi(dssdev); | ||
3214 | err3: | ||
3215 | dsi_display_uninit_dispc(dssdev); | ||
3216 | err2: | ||
3217 | enable_clocks(0); | ||
3218 | dsi_enable_pll_clock(0); | ||
3219 | err1: | ||
3220 | omap_dss_stop_device(dssdev); | ||
3221 | err0: | ||
3222 | dsi_bus_unlock(); | ||
3223 | mutex_unlock(&dsi.lock); | ||
3224 | DSSDBG("dsi_display_enable FAILED\n"); | ||
3225 | return r; | ||
3226 | } | ||
3227 | |||
3228 | static void dsi_display_disable(struct omap_dss_device *dssdev) | ||
3229 | { | ||
3230 | DSSDBG("dsi_display_disable\n"); | ||
3231 | |||
3232 | mutex_lock(&dsi.lock); | ||
3233 | dsi_bus_lock(); | ||
3234 | |||
3235 | if (dssdev->state == OMAP_DSS_DISPLAY_DISABLED || | ||
3236 | dssdev->state == OMAP_DSS_DISPLAY_SUSPENDED) | ||
3237 | goto end; | ||
3238 | |||
3239 | dsi.update_mode = OMAP_DSS_UPDATE_DISABLED; | ||
3240 | dssdev->state = OMAP_DSS_DISPLAY_DISABLED; | ||
3241 | |||
3242 | dsi_display_uninit_dispc(dssdev); | ||
3243 | |||
3244 | dsi_display_uninit_dsi(dssdev); | ||
3245 | |||
3246 | enable_clocks(0); | ||
3247 | dsi_enable_pll_clock(0); | ||
3248 | |||
3249 | omap_dss_stop_device(dssdev); | ||
3250 | end: | ||
3251 | dsi_bus_unlock(); | ||
3252 | mutex_unlock(&dsi.lock); | ||
3253 | } | ||
3254 | |||
3255 | static int dsi_display_suspend(struct omap_dss_device *dssdev) | ||
3256 | { | ||
3257 | DSSDBG("dsi_display_suspend\n"); | ||
3258 | |||
3259 | mutex_lock(&dsi.lock); | ||
3260 | dsi_bus_lock(); | ||
3261 | |||
3262 | if (dssdev->state == OMAP_DSS_DISPLAY_DISABLED || | ||
3263 | dssdev->state == OMAP_DSS_DISPLAY_SUSPENDED) | ||
3264 | goto end; | ||
3265 | |||
3266 | dsi.update_mode = OMAP_DSS_UPDATE_DISABLED; | ||
3267 | dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED; | ||
3268 | |||
3269 | dsi_display_uninit_dispc(dssdev); | ||
3270 | |||
3271 | dsi_display_uninit_dsi(dssdev); | ||
3272 | |||
3273 | enable_clocks(0); | ||
3274 | dsi_enable_pll_clock(0); | ||
3275 | end: | ||
3276 | dsi_bus_unlock(); | ||
3277 | mutex_unlock(&dsi.lock); | ||
3278 | |||
3279 | return 0; | ||
3280 | } | ||
3281 | |||
3282 | static int dsi_display_resume(struct omap_dss_device *dssdev) | ||
3283 | { | ||
3284 | int r; | ||
3285 | |||
3286 | DSSDBG("dsi_display_resume\n"); | ||
3287 | |||
3288 | mutex_lock(&dsi.lock); | ||
3289 | dsi_bus_lock(); | ||
3290 | |||
3291 | if (dssdev->state != OMAP_DSS_DISPLAY_SUSPENDED) { | ||
3292 | DSSERR("dssdev not suspended\n"); | ||
3293 | r = -EINVAL; | ||
3294 | goto err0; | ||
3295 | } | ||
3296 | |||
3297 | enable_clocks(1); | ||
3298 | dsi_enable_pll_clock(1); | ||
3299 | |||
3300 | r = _dsi_reset(); | ||
3301 | if (r) | ||
3302 | goto err1; | ||
3303 | |||
3304 | dsi_core_init(); | ||
3305 | |||
3306 | r = dsi_display_init_dispc(dssdev); | ||
3307 | if (r) | ||
3308 | goto err1; | ||
3309 | |||
3310 | r = dsi_display_init_dsi(dssdev); | ||
3311 | if (r) | ||
3312 | goto err2; | ||
3313 | |||
3314 | dssdev->state = OMAP_DSS_DISPLAY_ACTIVE; | ||
3315 | |||
3316 | r = dsi_set_te(dssdev, dsi.te_enabled); | ||
3317 | if (r) | ||
3318 | goto err2; | ||
3319 | |||
3320 | dsi_set_update_mode(dssdev, dsi.user_update_mode); | ||
3321 | |||
3322 | dsi_bus_unlock(); | ||
3323 | mutex_unlock(&dsi.lock); | ||
3324 | |||
3325 | return 0; | ||
3326 | |||
3327 | err2: | ||
3328 | dsi_display_uninit_dispc(dssdev); | ||
3329 | err1: | ||
3330 | enable_clocks(0); | ||
3331 | dsi_enable_pll_clock(0); | ||
3332 | err0: | ||
3333 | dsi_bus_unlock(); | ||
3334 | mutex_unlock(&dsi.lock); | ||
3335 | DSSDBG("dsi_display_resume FAILED\n"); | ||
3336 | return r; | ||
3337 | } | ||
3338 | |||
3339 | static int dsi_display_update(struct omap_dss_device *dssdev, | ||
3340 | u16 x, u16 y, u16 w, u16 h) | ||
3341 | { | ||
3342 | int r = 0; | ||
3343 | u16 dw, dh; | ||
3344 | |||
3345 | DSSDBG("dsi_display_update(%d,%d %dx%d)\n", x, y, w, h); | ||
3346 | |||
3347 | mutex_lock(&dsi.lock); | ||
3348 | |||
3349 | if (dsi.update_mode != OMAP_DSS_UPDATE_MANUAL) | ||
3350 | goto end; | ||
3351 | |||
3352 | if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE) | ||
3353 | goto end; | ||
3354 | |||
3355 | dssdev->get_resolution(dssdev, &dw, &dh); | ||
3356 | |||
3357 | if (x > dw || y > dh) | ||
3358 | goto end; | ||
3359 | |||
3360 | if (x + w > dw) | ||
3361 | w = dw - x; | ||
3362 | |||
3363 | if (y + h > dh) | ||
3364 | h = dh - y; | ||
3365 | |||
3366 | if (w == 0 || h == 0) | ||
3367 | goto end; | ||
3368 | |||
3369 | if (w == 1) { | ||
3370 | r = -EINVAL; | ||
3371 | goto end; | ||
3372 | } | ||
3373 | |||
3374 | dsi_set_update_region(dssdev, x, y, w, h); | ||
3375 | |||
3376 | wake_up(&dsi.waitqueue); | ||
3377 | |||
3378 | end: | ||
3379 | mutex_unlock(&dsi.lock); | ||
3380 | |||
3381 | return r; | ||
3382 | } | ||
3383 | |||
3384 | static int dsi_display_sync(struct omap_dss_device *dssdev) | ||
3385 | { | ||
3386 | bool wait; | ||
3387 | |||
3388 | DSSDBG("dsi_display_sync()\n"); | ||
3389 | |||
3390 | mutex_lock(&dsi.lock); | ||
3391 | dsi_bus_lock(); | ||
3392 | |||
3393 | if (dsi.update_mode == OMAP_DSS_UPDATE_MANUAL && | ||
3394 | dsi.update_region.dirty) { | ||
3395 | INIT_COMPLETION(dsi.update_completion); | ||
3396 | wait = true; | ||
3397 | } else { | ||
3398 | wait = false; | ||
3399 | } | ||
3400 | |||
3401 | dsi_bus_unlock(); | ||
3402 | mutex_unlock(&dsi.lock); | ||
3403 | |||
3404 | if (wait) | ||
3405 | wait_for_completion_interruptible(&dsi.update_completion); | ||
3406 | |||
3407 | DSSDBG("dsi_display_sync() done\n"); | ||
3408 | return 0; | ||
3409 | } | ||
3410 | |||
3411 | static int dsi_display_set_update_mode(struct omap_dss_device *dssdev, | ||
3412 | enum omap_dss_update_mode mode) | ||
3413 | { | ||
3414 | int r = 0; | ||
3415 | |||
3416 | DSSDBGF("%d", mode); | ||
3417 | |||
3418 | mutex_lock(&dsi.lock); | ||
3419 | dsi_bus_lock(); | ||
3420 | |||
3421 | dsi.user_update_mode = mode; | ||
3422 | r = dsi_set_update_mode(dssdev, mode); | ||
3423 | |||
3424 | dsi_bus_unlock(); | ||
3425 | mutex_unlock(&dsi.lock); | ||
3426 | |||
3427 | return r; | ||
3428 | } | ||
3429 | |||
3430 | static enum omap_dss_update_mode dsi_display_get_update_mode( | ||
3431 | struct omap_dss_device *dssdev) | ||
3432 | { | ||
3433 | return dsi.update_mode; | ||
3434 | } | ||
3435 | |||
3436 | |||
3437 | static int dsi_display_enable_te(struct omap_dss_device *dssdev, bool enable) | ||
3438 | { | ||
3439 | int r = 0; | ||
3440 | |||
3441 | DSSDBGF("%d", enable); | ||
3442 | |||
3443 | if (!dssdev->driver->enable_te) | ||
3444 | return -ENOENT; | ||
3445 | |||
3446 | dsi_bus_lock(); | ||
3447 | |||
3448 | dsi.te_enabled = enable; | ||
3449 | |||
3450 | if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE) | ||
3451 | goto end; | ||
3452 | |||
3453 | r = dsi_set_te(dssdev, enable); | ||
3454 | end: | ||
3455 | dsi_bus_unlock(); | ||
3456 | |||
3457 | return r; | ||
3458 | } | ||
3459 | |||
3460 | static int dsi_display_get_te(struct omap_dss_device *dssdev) | ||
3461 | { | ||
3462 | return dsi.te_enabled; | ||
3463 | } | ||
3464 | |||
3465 | static int dsi_display_set_rotate(struct omap_dss_device *dssdev, u8 rotate) | ||
3466 | { | ||
3467 | |||
3468 | DSSDBGF("%d", rotate); | ||
3469 | |||
3470 | if (!dssdev->driver->set_rotate || !dssdev->driver->get_rotate) | ||
3471 | return -EINVAL; | ||
3472 | |||
3473 | dsi_bus_lock(); | ||
3474 | dssdev->driver->set_rotate(dssdev, rotate); | ||
3475 | if (dsi.update_mode == OMAP_DSS_UPDATE_AUTO) { | ||
3476 | u16 w, h; | ||
3477 | /* the display dimensions may have changed, so set a new | ||
3478 | * update region */ | ||
3479 | dssdev->get_resolution(dssdev, &w, &h); | ||
3480 | dsi_set_update_region(dssdev, 0, 0, w, h); | ||
3481 | } | ||
3482 | dsi_bus_unlock(); | ||
3483 | |||
3484 | return 0; | ||
3485 | } | ||
3486 | |||
3487 | static u8 dsi_display_get_rotate(struct omap_dss_device *dssdev) | ||
3488 | { | ||
3489 | if (!dssdev->driver->set_rotate || !dssdev->driver->get_rotate) | ||
3490 | return 0; | ||
3491 | |||
3492 | return dssdev->driver->get_rotate(dssdev); | ||
3493 | } | ||
3494 | |||
3495 | static int dsi_display_set_mirror(struct omap_dss_device *dssdev, bool mirror) | ||
3496 | { | ||
3497 | DSSDBGF("%d", mirror); | ||
3498 | |||
3499 | if (!dssdev->driver->set_mirror || !dssdev->driver->get_mirror) | ||
3500 | return -EINVAL; | ||
3501 | |||
3502 | dsi_bus_lock(); | ||
3503 | dssdev->driver->set_mirror(dssdev, mirror); | ||
3504 | dsi_bus_unlock(); | ||
3505 | |||
3506 | return 0; | ||
3507 | } | ||
3508 | |||
3509 | static bool dsi_display_get_mirror(struct omap_dss_device *dssdev) | ||
3510 | { | ||
3511 | if (!dssdev->driver->set_mirror || !dssdev->driver->get_mirror) | ||
3512 | return 0; | ||
3513 | |||
3514 | return dssdev->driver->get_mirror(dssdev); | ||
3515 | } | ||
3516 | |||
3517 | static int dsi_display_run_test(struct omap_dss_device *dssdev, int test_num) | ||
3518 | { | ||
3519 | int r; | ||
3520 | |||
3521 | if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE) | ||
3522 | return -EIO; | ||
3523 | |||
3524 | DSSDBGF("%d", test_num); | ||
3525 | |||
3526 | dsi_bus_lock(); | ||
3527 | |||
3528 | /* run test first in low speed mode */ | ||
3529 | dsi_vc_enable_hs(0, 0); | ||
3530 | |||
3531 | if (dssdev->driver->run_test) { | ||
3532 | r = dssdev->driver->run_test(dssdev, test_num); | ||
3533 | if (r) | ||
3534 | goto end; | ||
3535 | } | ||
3536 | |||
3537 | /* then in high speed */ | ||
3538 | dsi_vc_enable_hs(0, 1); | ||
3539 | |||
3540 | if (dssdev->driver->run_test) { | ||
3541 | r = dssdev->driver->run_test(dssdev, test_num); | ||
3542 | if (r) | ||
3543 | goto end; | ||
3544 | } | ||
3545 | |||
3546 | end: | ||
3547 | dsi_vc_enable_hs(0, 1); | ||
3548 | |||
3549 | dsi_bus_unlock(); | ||
3550 | |||
3551 | return r; | ||
3552 | } | ||
3553 | |||
3554 | static int dsi_display_memory_read(struct omap_dss_device *dssdev, | ||
3555 | void *buf, size_t size, | ||
3556 | u16 x, u16 y, u16 w, u16 h) | ||
3557 | { | ||
3558 | int r; | ||
3559 | |||
3560 | DSSDBGF(""); | ||
3561 | |||
3562 | if (!dssdev->driver->memory_read) | ||
3563 | return -EINVAL; | ||
3564 | |||
3565 | if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE) | ||
3566 | return -EIO; | ||
3567 | |||
3568 | dsi_bus_lock(); | ||
3569 | |||
3570 | r = dssdev->driver->memory_read(dssdev, buf, size, | ||
3571 | x, y, w, h); | ||
3572 | |||
3573 | /* Memory read usually changes the update area. This will | ||
3574 | * force the next update to re-set the update area */ | ||
3575 | dsi.active_update_region.dirty = true; | ||
3576 | |||
3577 | dsi_bus_unlock(); | ||
3578 | |||
3579 | return r; | ||
3580 | } | ||
3581 | |||
3582 | void dsi_get_overlay_fifo_thresholds(enum omap_plane plane, | ||
3583 | u32 fifo_size, enum omap_burst_size *burst_size, | ||
3584 | u32 *fifo_low, u32 *fifo_high) | ||
3585 | { | ||
3586 | unsigned burst_size_bytes; | ||
3587 | |||
3588 | *burst_size = OMAP_DSS_BURST_16x32; | ||
3589 | burst_size_bytes = 16 * 32 / 8; | ||
3590 | |||
3591 | *fifo_high = fifo_size - burst_size_bytes; | ||
3592 | *fifo_low = fifo_size - burst_size_bytes * 8; | ||
3593 | } | ||
3594 | |||
3595 | int dsi_init_display(struct omap_dss_device *dssdev) | ||
3596 | { | ||
3597 | DSSDBG("DSI init\n"); | ||
3598 | |||
3599 | dssdev->enable = dsi_display_enable; | ||
3600 | dssdev->disable = dsi_display_disable; | ||
3601 | dssdev->suspend = dsi_display_suspend; | ||
3602 | dssdev->resume = dsi_display_resume; | ||
3603 | dssdev->update = dsi_display_update; | ||
3604 | dssdev->sync = dsi_display_sync; | ||
3605 | dssdev->set_update_mode = dsi_display_set_update_mode; | ||
3606 | dssdev->get_update_mode = dsi_display_get_update_mode; | ||
3607 | dssdev->enable_te = dsi_display_enable_te; | ||
3608 | dssdev->get_te = dsi_display_get_te; | ||
3609 | |||
3610 | dssdev->get_rotate = dsi_display_get_rotate; | ||
3611 | dssdev->set_rotate = dsi_display_set_rotate; | ||
3612 | |||
3613 | dssdev->get_mirror = dsi_display_get_mirror; | ||
3614 | dssdev->set_mirror = dsi_display_set_mirror; | ||
3615 | |||
3616 | dssdev->run_test = dsi_display_run_test; | ||
3617 | dssdev->memory_read = dsi_display_memory_read; | ||
3618 | |||
3619 | /* XXX these should be figured out dynamically */ | ||
3620 | dssdev->caps = OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE | | ||
3621 | OMAP_DSS_DISPLAY_CAP_TEAR_ELIM; | ||
3622 | |||
3623 | dsi.vc[0].dssdev = dssdev; | ||
3624 | dsi.vc[1].dssdev = dssdev; | ||
3625 | |||
3626 | return 0; | ||
3627 | } | ||
3628 | |||
3629 | int dsi_init(struct platform_device *pdev) | ||
3630 | { | ||
3631 | u32 rev; | ||
3632 | int r; | ||
3633 | struct sched_param param = { | ||
3634 | .sched_priority = MAX_USER_RT_PRIO-1 | ||
3635 | }; | ||
3636 | |||
3637 | spin_lock_init(&dsi.errors_lock); | ||
3638 | dsi.errors = 0; | ||
3639 | |||
3640 | init_completion(&dsi.bta_completion); | ||
3641 | init_completion(&dsi.update_completion); | ||
3642 | |||
3643 | dsi.thread = kthread_create(dsi_update_thread, NULL, "dsi"); | ||
3644 | if (IS_ERR(dsi.thread)) { | ||
3645 | DSSERR("cannot create kthread\n"); | ||
3646 | r = PTR_ERR(dsi.thread); | ||
3647 | goto err0; | ||
3648 | } | ||
3649 | sched_setscheduler(dsi.thread, SCHED_FIFO, ¶m); | ||
3650 | |||
3651 | init_waitqueue_head(&dsi.waitqueue); | ||
3652 | spin_lock_init(&dsi.update_lock); | ||
3653 | |||
3654 | mutex_init(&dsi.lock); | ||
3655 | mutex_init(&dsi.bus_lock); | ||
3656 | |||
3657 | #ifdef DSI_CATCH_MISSING_TE | ||
3658 | init_timer(&dsi.te_timer); | ||
3659 | dsi.te_timer.function = dsi_te_timeout; | ||
3660 | dsi.te_timer.data = 0; | ||
3661 | #endif | ||
3662 | |||
3663 | dsi.update_mode = OMAP_DSS_UPDATE_DISABLED; | ||
3664 | dsi.user_update_mode = OMAP_DSS_UPDATE_DISABLED; | ||
3665 | |||
3666 | dsi.base = ioremap(DSI_BASE, DSI_SZ_REGS); | ||
3667 | if (!dsi.base) { | ||
3668 | DSSERR("can't ioremap DSI\n"); | ||
3669 | r = -ENOMEM; | ||
3670 | goto err1; | ||
3671 | } | ||
3672 | |||
3673 | dsi.vdds_dsi_reg = regulator_get(&pdev->dev, "vdds_dsi"); | ||
3674 | if (IS_ERR(dsi.vdds_dsi_reg)) { | ||
3675 | iounmap(dsi.base); | ||
3676 | DSSERR("can't get VDDS_DSI regulator\n"); | ||
3677 | r = PTR_ERR(dsi.vdds_dsi_reg); | ||
3678 | goto err2; | ||
3679 | } | ||
3680 | |||
3681 | enable_clocks(1); | ||
3682 | |||
3683 | rev = dsi_read_reg(DSI_REVISION); | ||
3684 | printk(KERN_INFO "OMAP DSI rev %d.%d\n", | ||
3685 | FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0)); | ||
3686 | |||
3687 | enable_clocks(0); | ||
3688 | |||
3689 | wake_up_process(dsi.thread); | ||
3690 | |||
3691 | return 0; | ||
3692 | err2: | ||
3693 | iounmap(dsi.base); | ||
3694 | err1: | ||
3695 | kthread_stop(dsi.thread); | ||
3696 | err0: | ||
3697 | return r; | ||
3698 | } | ||
3699 | |||
3700 | void dsi_exit(void) | ||
3701 | { | ||
3702 | kthread_stop(dsi.thread); | ||
3703 | |||
3704 | regulator_put(dsi.vdds_dsi_reg); | ||
3705 | |||
3706 | iounmap(dsi.base); | ||
3707 | |||
3708 | DSSDBG("omap_dsi_exit\n"); | ||
3709 | } | ||
3710 | |||
diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c new file mode 100644 index 000000000000..9b05ee65a15d --- /dev/null +++ b/drivers/video/omap2/dss/dss.c | |||
@@ -0,0 +1,596 @@ | |||
1 | /* | ||
2 | * linux/drivers/video/omap2/dss/dss.c | ||
3 | * | ||
4 | * Copyright (C) 2009 Nokia Corporation | ||
5 | * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> | ||
6 | * | ||
7 | * Some code and ideas taken from drivers/video/omap/ driver | ||
8 | * by Imre Deak. | ||
9 | * | ||
10 | * This program is free software; you can redistribute it and/or modify it | ||
11 | * under the terms of the GNU General Public License version 2 as published by | ||
12 | * the Free Software Foundation. | ||
13 | * | ||
14 | * This program is distributed in the hope that it will be useful, but WITHOUT | ||
15 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | ||
16 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for | ||
17 | * more details. | ||
18 | * | ||
19 | * You should have received a copy of the GNU General Public License along with | ||
20 | * this program. If not, see <http://www.gnu.org/licenses/>. | ||
21 | */ | ||
22 | |||
23 | #define DSS_SUBSYS_NAME "DSS" | ||
24 | |||
25 | #include <linux/kernel.h> | ||
26 | #include <linux/io.h> | ||
27 | #include <linux/err.h> | ||
28 | #include <linux/delay.h> | ||
29 | #include <linux/interrupt.h> | ||
30 | #include <linux/seq_file.h> | ||
31 | #include <linux/clk.h> | ||
32 | |||
33 | #include <plat/display.h> | ||
34 | #include "dss.h" | ||
35 | |||
36 | #define DSS_BASE 0x48050000 | ||
37 | |||
38 | #define DSS_SZ_REGS SZ_512 | ||
39 | |||
40 | struct dss_reg { | ||
41 | u16 idx; | ||
42 | }; | ||
43 | |||
44 | #define DSS_REG(idx) ((const struct dss_reg) { idx }) | ||
45 | |||
46 | #define DSS_REVISION DSS_REG(0x0000) | ||
47 | #define DSS_SYSCONFIG DSS_REG(0x0010) | ||
48 | #define DSS_SYSSTATUS DSS_REG(0x0014) | ||
49 | #define DSS_IRQSTATUS DSS_REG(0x0018) | ||
50 | #define DSS_CONTROL DSS_REG(0x0040) | ||
51 | #define DSS_SDI_CONTROL DSS_REG(0x0044) | ||
52 | #define DSS_PLL_CONTROL DSS_REG(0x0048) | ||
53 | #define DSS_SDI_STATUS DSS_REG(0x005C) | ||
54 | |||
55 | #define REG_GET(idx, start, end) \ | ||
56 | FLD_GET(dss_read_reg(idx), start, end) | ||
57 | |||
58 | #define REG_FLD_MOD(idx, val, start, end) \ | ||
59 | dss_write_reg(idx, FLD_MOD(dss_read_reg(idx), val, start, end)) | ||
60 | |||
61 | static struct { | ||
62 | void __iomem *base; | ||
63 | |||
64 | struct clk *dpll4_m4_ck; | ||
65 | |||
66 | unsigned long cache_req_pck; | ||
67 | unsigned long cache_prate; | ||
68 | struct dss_clock_info cache_dss_cinfo; | ||
69 | struct dispc_clock_info cache_dispc_cinfo; | ||
70 | |||
71 | u32 ctx[DSS_SZ_REGS / sizeof(u32)]; | ||
72 | } dss; | ||
73 | |||
74 | static int _omap_dss_wait_reset(void); | ||
75 | |||
76 | static inline void dss_write_reg(const struct dss_reg idx, u32 val) | ||
77 | { | ||
78 | __raw_writel(val, dss.base + idx.idx); | ||
79 | } | ||
80 | |||
81 | static inline u32 dss_read_reg(const struct dss_reg idx) | ||
82 | { | ||
83 | return __raw_readl(dss.base + idx.idx); | ||
84 | } | ||
85 | |||
86 | #define SR(reg) \ | ||
87 | dss.ctx[(DSS_##reg).idx / sizeof(u32)] = dss_read_reg(DSS_##reg) | ||
88 | #define RR(reg) \ | ||
89 | dss_write_reg(DSS_##reg, dss.ctx[(DSS_##reg).idx / sizeof(u32)]) | ||
90 | |||
91 | void dss_save_context(void) | ||
92 | { | ||
93 | if (cpu_is_omap24xx()) | ||
94 | return; | ||
95 | |||
96 | SR(SYSCONFIG); | ||
97 | SR(CONTROL); | ||
98 | |||
99 | #ifdef CONFIG_OMAP2_DSS_SDI | ||
100 | SR(SDI_CONTROL); | ||
101 | SR(PLL_CONTROL); | ||
102 | #endif | ||
103 | } | ||
104 | |||
105 | void dss_restore_context(void) | ||
106 | { | ||
107 | if (_omap_dss_wait_reset()) | ||
108 | DSSERR("DSS not coming out of reset after sleep\n"); | ||
109 | |||
110 | RR(SYSCONFIG); | ||
111 | RR(CONTROL); | ||
112 | |||
113 | #ifdef CONFIG_OMAP2_DSS_SDI | ||
114 | RR(SDI_CONTROL); | ||
115 | RR(PLL_CONTROL); | ||
116 | #endif | ||
117 | } | ||
118 | |||
119 | #undef SR | ||
120 | #undef RR | ||
121 | |||
122 | void dss_sdi_init(u8 datapairs) | ||
123 | { | ||
124 | u32 l; | ||
125 | |||
126 | BUG_ON(datapairs > 3 || datapairs < 1); | ||
127 | |||
128 | l = dss_read_reg(DSS_SDI_CONTROL); | ||
129 | l = FLD_MOD(l, 0xf, 19, 15); /* SDI_PDIV */ | ||
130 | l = FLD_MOD(l, datapairs-1, 3, 2); /* SDI_PRSEL */ | ||
131 | l = FLD_MOD(l, 2, 1, 0); /* SDI_BWSEL */ | ||
132 | dss_write_reg(DSS_SDI_CONTROL, l); | ||
133 | |||
134 | l = dss_read_reg(DSS_PLL_CONTROL); | ||
135 | l = FLD_MOD(l, 0x7, 25, 22); /* SDI_PLL_FREQSEL */ | ||
136 | l = FLD_MOD(l, 0xb, 16, 11); /* SDI_PLL_REGN */ | ||
137 | l = FLD_MOD(l, 0xb4, 10, 1); /* SDI_PLL_REGM */ | ||
138 | dss_write_reg(DSS_PLL_CONTROL, l); | ||
139 | } | ||
140 | |||
141 | int dss_sdi_enable(void) | ||
142 | { | ||
143 | unsigned long timeout; | ||
144 | |||
145 | dispc_pck_free_enable(1); | ||
146 | |||
147 | /* Reset SDI PLL */ | ||
148 | REG_FLD_MOD(DSS_PLL_CONTROL, 1, 18, 18); /* SDI_PLL_SYSRESET */ | ||
149 | udelay(1); /* wait 2x PCLK */ | ||
150 | |||
151 | /* Lock SDI PLL */ | ||
152 | REG_FLD_MOD(DSS_PLL_CONTROL, 1, 28, 28); /* SDI_PLL_GOBIT */ | ||
153 | |||
154 | /* Waiting for PLL lock request to complete */ | ||
155 | timeout = jiffies + msecs_to_jiffies(500); | ||
156 | while (dss_read_reg(DSS_SDI_STATUS) & (1 << 6)) { | ||
157 | if (time_after_eq(jiffies, timeout)) { | ||
158 | DSSERR("PLL lock request timed out\n"); | ||
159 | goto err1; | ||
160 | } | ||
161 | } | ||
162 | |||
163 | /* Clearing PLL_GO bit */ | ||
164 | REG_FLD_MOD(DSS_PLL_CONTROL, 0, 28, 28); | ||
165 | |||
166 | /* Waiting for PLL to lock */ | ||
167 | timeout = jiffies + msecs_to_jiffies(500); | ||
168 | while (!(dss_read_reg(DSS_SDI_STATUS) & (1 << 5))) { | ||
169 | if (time_after_eq(jiffies, timeout)) { | ||
170 | DSSERR("PLL lock timed out\n"); | ||
171 | goto err1; | ||
172 | } | ||
173 | } | ||
174 | |||
175 | dispc_lcd_enable_signal(1); | ||
176 | |||
177 | /* Waiting for SDI reset to complete */ | ||
178 | timeout = jiffies + msecs_to_jiffies(500); | ||
179 | while (!(dss_read_reg(DSS_SDI_STATUS) & (1 << 2))) { | ||
180 | if (time_after_eq(jiffies, timeout)) { | ||
181 | DSSERR("SDI reset timed out\n"); | ||
182 | goto err2; | ||
183 | } | ||
184 | } | ||
185 | |||
186 | return 0; | ||
187 | |||
188 | err2: | ||
189 | dispc_lcd_enable_signal(0); | ||
190 | err1: | ||
191 | /* Reset SDI PLL */ | ||
192 | REG_FLD_MOD(DSS_PLL_CONTROL, 0, 18, 18); /* SDI_PLL_SYSRESET */ | ||
193 | |||
194 | dispc_pck_free_enable(0); | ||
195 | |||
196 | return -ETIMEDOUT; | ||
197 | } | ||
198 | |||
199 | void dss_sdi_disable(void) | ||
200 | { | ||
201 | dispc_lcd_enable_signal(0); | ||
202 | |||
203 | dispc_pck_free_enable(0); | ||
204 | |||
205 | /* Reset SDI PLL */ | ||
206 | REG_FLD_MOD(DSS_PLL_CONTROL, 0, 18, 18); /* SDI_PLL_SYSRESET */ | ||
207 | } | ||
208 | |||
209 | void dss_dump_clocks(struct seq_file *s) | ||
210 | { | ||
211 | unsigned long dpll4_ck_rate; | ||
212 | unsigned long dpll4_m4_ck_rate; | ||
213 | |||
214 | dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); | ||
215 | |||
216 | dpll4_ck_rate = clk_get_rate(clk_get_parent(dss.dpll4_m4_ck)); | ||
217 | dpll4_m4_ck_rate = clk_get_rate(dss.dpll4_m4_ck); | ||
218 | |||
219 | seq_printf(s, "- DSS -\n"); | ||
220 | |||
221 | seq_printf(s, "dpll4_ck %lu\n", dpll4_ck_rate); | ||
222 | |||
223 | seq_printf(s, "dss1_alwon_fclk = %lu / %lu * 2 = %lu\n", | ||
224 | dpll4_ck_rate, | ||
225 | dpll4_ck_rate / dpll4_m4_ck_rate, | ||
226 | dss_clk_get_rate(DSS_CLK_FCK1)); | ||
227 | |||
228 | dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); | ||
229 | } | ||
230 | |||
231 | void dss_dump_regs(struct seq_file *s) | ||
232 | { | ||
233 | #define DUMPREG(r) seq_printf(s, "%-35s %08x\n", #r, dss_read_reg(r)) | ||
234 | |||
235 | dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); | ||
236 | |||
237 | DUMPREG(DSS_REVISION); | ||
238 | DUMPREG(DSS_SYSCONFIG); | ||
239 | DUMPREG(DSS_SYSSTATUS); | ||
240 | DUMPREG(DSS_IRQSTATUS); | ||
241 | DUMPREG(DSS_CONTROL); | ||
242 | DUMPREG(DSS_SDI_CONTROL); | ||
243 | DUMPREG(DSS_PLL_CONTROL); | ||
244 | DUMPREG(DSS_SDI_STATUS); | ||
245 | |||
246 | dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); | ||
247 | #undef DUMPREG | ||
248 | } | ||
249 | |||
250 | void dss_select_clk_source(bool dsi, bool dispc) | ||
251 | { | ||
252 | u32 r; | ||
253 | r = dss_read_reg(DSS_CONTROL); | ||
254 | r = FLD_MOD(r, dsi, 1, 1); /* DSI_CLK_SWITCH */ | ||
255 | r = FLD_MOD(r, dispc, 0, 0); /* DISPC_CLK_SWITCH */ | ||
256 | dss_write_reg(DSS_CONTROL, r); | ||
257 | } | ||
258 | |||
259 | int dss_get_dsi_clk_source(void) | ||
260 | { | ||
261 | return FLD_GET(dss_read_reg(DSS_CONTROL), 1, 1); | ||
262 | } | ||
263 | |||
264 | int dss_get_dispc_clk_source(void) | ||
265 | { | ||
266 | return FLD_GET(dss_read_reg(DSS_CONTROL), 0, 0); | ||
267 | } | ||
268 | |||
269 | /* calculate clock rates using dividers in cinfo */ | ||
270 | int dss_calc_clock_rates(struct dss_clock_info *cinfo) | ||
271 | { | ||
272 | unsigned long prate; | ||
273 | |||
274 | if (cinfo->fck_div > 16 || cinfo->fck_div == 0) | ||
275 | return -EINVAL; | ||
276 | |||
277 | prate = clk_get_rate(clk_get_parent(dss.dpll4_m4_ck)); | ||
278 | |||
279 | cinfo->fck = prate / cinfo->fck_div; | ||
280 | |||
281 | return 0; | ||
282 | } | ||
283 | |||
284 | int dss_set_clock_div(struct dss_clock_info *cinfo) | ||
285 | { | ||
286 | unsigned long prate; | ||
287 | int r; | ||
288 | |||
289 | if (cpu_is_omap34xx()) { | ||
290 | prate = clk_get_rate(clk_get_parent(dss.dpll4_m4_ck)); | ||
291 | DSSDBG("dpll4_m4 = %ld\n", prate); | ||
292 | |||
293 | r = clk_set_rate(dss.dpll4_m4_ck, prate / cinfo->fck_div); | ||
294 | if (r) | ||
295 | return r; | ||
296 | } | ||
297 | |||
298 | DSSDBG("fck = %ld (%d)\n", cinfo->fck, cinfo->fck_div); | ||
299 | |||
300 | return 0; | ||
301 | } | ||
302 | |||
303 | int dss_get_clock_div(struct dss_clock_info *cinfo) | ||
304 | { | ||
305 | cinfo->fck = dss_clk_get_rate(DSS_CLK_FCK1); | ||
306 | |||
307 | if (cpu_is_omap34xx()) { | ||
308 | unsigned long prate; | ||
309 | prate = clk_get_rate(clk_get_parent(dss.dpll4_m4_ck)); | ||
310 | cinfo->fck_div = prate / (cinfo->fck / 2); | ||
311 | } else { | ||
312 | cinfo->fck_div = 0; | ||
313 | } | ||
314 | |||
315 | return 0; | ||
316 | } | ||
317 | |||
318 | unsigned long dss_get_dpll4_rate(void) | ||
319 | { | ||
320 | if (cpu_is_omap34xx()) | ||
321 | return clk_get_rate(clk_get_parent(dss.dpll4_m4_ck)); | ||
322 | else | ||
323 | return 0; | ||
324 | } | ||
325 | |||
326 | int dss_calc_clock_div(bool is_tft, unsigned long req_pck, | ||
327 | struct dss_clock_info *dss_cinfo, | ||
328 | struct dispc_clock_info *dispc_cinfo) | ||
329 | { | ||
330 | unsigned long prate; | ||
331 | struct dss_clock_info best_dss; | ||
332 | struct dispc_clock_info best_dispc; | ||
333 | |||
334 | unsigned long fck; | ||
335 | |||
336 | u16 fck_div; | ||
337 | |||
338 | int match = 0; | ||
339 | int min_fck_per_pck; | ||
340 | |||
341 | prate = dss_get_dpll4_rate(); | ||
342 | |||
343 | fck = dss_clk_get_rate(DSS_CLK_FCK1); | ||
344 | if (req_pck == dss.cache_req_pck && | ||
345 | ((cpu_is_omap34xx() && prate == dss.cache_prate) || | ||
346 | dss.cache_dss_cinfo.fck == fck)) { | ||
347 | DSSDBG("dispc clock info found from cache.\n"); | ||
348 | *dss_cinfo = dss.cache_dss_cinfo; | ||
349 | *dispc_cinfo = dss.cache_dispc_cinfo; | ||
350 | return 0; | ||
351 | } | ||
352 | |||
353 | min_fck_per_pck = CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK; | ||
354 | |||
355 | if (min_fck_per_pck && | ||
356 | req_pck * min_fck_per_pck > DISPC_MAX_FCK) { | ||
357 | DSSERR("Requested pixel clock not possible with the current " | ||
358 | "OMAP2_DSS_MIN_FCK_PER_PCK setting. Turning " | ||
359 | "the constraint off.\n"); | ||
360 | min_fck_per_pck = 0; | ||
361 | } | ||
362 | |||
363 | retry: | ||
364 | memset(&best_dss, 0, sizeof(best_dss)); | ||
365 | memset(&best_dispc, 0, sizeof(best_dispc)); | ||
366 | |||
367 | if (cpu_is_omap24xx()) { | ||
368 | struct dispc_clock_info cur_dispc; | ||
369 | /* XXX can we change the clock on omap2? */ | ||
370 | fck = dss_clk_get_rate(DSS_CLK_FCK1); | ||
371 | fck_div = 1; | ||
372 | |||
373 | dispc_find_clk_divs(is_tft, req_pck, fck, &cur_dispc); | ||
374 | match = 1; | ||
375 | |||
376 | best_dss.fck = fck; | ||
377 | best_dss.fck_div = fck_div; | ||
378 | |||
379 | best_dispc = cur_dispc; | ||
380 | |||
381 | goto found; | ||
382 | } else if (cpu_is_omap34xx()) { | ||
383 | for (fck_div = 16; fck_div > 0; --fck_div) { | ||
384 | struct dispc_clock_info cur_dispc; | ||
385 | |||
386 | fck = prate / fck_div * 2; | ||
387 | |||
388 | if (fck > DISPC_MAX_FCK) | ||
389 | continue; | ||
390 | |||
391 | if (min_fck_per_pck && | ||
392 | fck < req_pck * min_fck_per_pck) | ||
393 | continue; | ||
394 | |||
395 | match = 1; | ||
396 | |||
397 | dispc_find_clk_divs(is_tft, req_pck, fck, &cur_dispc); | ||
398 | |||
399 | if (abs(cur_dispc.pck - req_pck) < | ||
400 | abs(best_dispc.pck - req_pck)) { | ||
401 | |||
402 | best_dss.fck = fck; | ||
403 | best_dss.fck_div = fck_div; | ||
404 | |||
405 | best_dispc = cur_dispc; | ||
406 | |||
407 | if (cur_dispc.pck == req_pck) | ||
408 | goto found; | ||
409 | } | ||
410 | } | ||
411 | } else { | ||
412 | BUG(); | ||
413 | } | ||
414 | |||
415 | found: | ||
416 | if (!match) { | ||
417 | if (min_fck_per_pck) { | ||
418 | DSSERR("Could not find suitable clock settings.\n" | ||
419 | "Turning FCK/PCK constraint off and" | ||
420 | "trying again.\n"); | ||
421 | min_fck_per_pck = 0; | ||
422 | goto retry; | ||
423 | } | ||
424 | |||
425 | DSSERR("Could not find suitable clock settings.\n"); | ||
426 | |||
427 | return -EINVAL; | ||
428 | } | ||
429 | |||
430 | if (dss_cinfo) | ||
431 | *dss_cinfo = best_dss; | ||
432 | if (dispc_cinfo) | ||
433 | *dispc_cinfo = best_dispc; | ||
434 | |||
435 | dss.cache_req_pck = req_pck; | ||
436 | dss.cache_prate = prate; | ||
437 | dss.cache_dss_cinfo = best_dss; | ||
438 | dss.cache_dispc_cinfo = best_dispc; | ||
439 | |||
440 | return 0; | ||
441 | } | ||
442 | |||
443 | |||
444 | |||
445 | static irqreturn_t dss_irq_handler_omap2(int irq, void *arg) | ||
446 | { | ||
447 | dispc_irq_handler(); | ||
448 | |||
449 | return IRQ_HANDLED; | ||
450 | } | ||
451 | |||
452 | static irqreturn_t dss_irq_handler_omap3(int irq, void *arg) | ||
453 | { | ||
454 | u32 irqstatus; | ||
455 | |||
456 | irqstatus = dss_read_reg(DSS_IRQSTATUS); | ||
457 | |||
458 | if (irqstatus & (1<<0)) /* DISPC_IRQ */ | ||
459 | dispc_irq_handler(); | ||
460 | #ifdef CONFIG_OMAP2_DSS_DSI | ||
461 | if (irqstatus & (1<<1)) /* DSI_IRQ */ | ||
462 | dsi_irq_handler(); | ||
463 | #endif | ||
464 | |||
465 | return IRQ_HANDLED; | ||
466 | } | ||
467 | |||
468 | static int _omap_dss_wait_reset(void) | ||
469 | { | ||
470 | unsigned timeout = 1000; | ||
471 | |||
472 | while (REG_GET(DSS_SYSSTATUS, 0, 0) == 0) { | ||
473 | udelay(1); | ||
474 | if (!--timeout) { | ||
475 | DSSERR("soft reset failed\n"); | ||
476 | return -ENODEV; | ||
477 | } | ||
478 | } | ||
479 | |||
480 | return 0; | ||
481 | } | ||
482 | |||
483 | static int _omap_dss_reset(void) | ||
484 | { | ||
485 | /* Soft reset */ | ||
486 | REG_FLD_MOD(DSS_SYSCONFIG, 1, 1, 1); | ||
487 | return _omap_dss_wait_reset(); | ||
488 | } | ||
489 | |||
490 | void dss_set_venc_output(enum omap_dss_venc_type type) | ||
491 | { | ||
492 | int l = 0; | ||
493 | |||
494 | if (type == OMAP_DSS_VENC_TYPE_COMPOSITE) | ||
495 | l = 0; | ||
496 | else if (type == OMAP_DSS_VENC_TYPE_SVIDEO) | ||
497 | l = 1; | ||
498 | else | ||
499 | BUG(); | ||
500 | |||
501 | /* venc out selection. 0 = comp, 1 = svideo */ | ||
502 | REG_FLD_MOD(DSS_CONTROL, l, 6, 6); | ||
503 | } | ||
504 | |||
505 | void dss_set_dac_pwrdn_bgz(bool enable) | ||
506 | { | ||
507 | REG_FLD_MOD(DSS_CONTROL, enable, 5, 5); /* DAC Power-Down Control */ | ||
508 | } | ||
509 | |||
510 | int dss_init(bool skip_init) | ||
511 | { | ||
512 | int r; | ||
513 | u32 rev; | ||
514 | |||
515 | dss.base = ioremap(DSS_BASE, DSS_SZ_REGS); | ||
516 | if (!dss.base) { | ||
517 | DSSERR("can't ioremap DSS\n"); | ||
518 | r = -ENOMEM; | ||
519 | goto fail0; | ||
520 | } | ||
521 | |||
522 | if (!skip_init) { | ||
523 | /* disable LCD and DIGIT output. This seems to fix the synclost | ||
524 | * problem that we get, if the bootloader starts the DSS and | ||
525 | * the kernel resets it */ | ||
526 | omap_writel(omap_readl(0x48050440) & ~0x3, 0x48050440); | ||
527 | |||
528 | /* We need to wait here a bit, otherwise we sometimes start to | ||
529 | * get synclost errors, and after that only power cycle will | ||
530 | * restore DSS functionality. I have no idea why this happens. | ||
531 | * And we have to wait _before_ resetting the DSS, but after | ||
532 | * enabling clocks. | ||
533 | */ | ||
534 | msleep(50); | ||
535 | |||
536 | _omap_dss_reset(); | ||
537 | } | ||
538 | |||
539 | /* autoidle */ | ||
540 | REG_FLD_MOD(DSS_SYSCONFIG, 1, 0, 0); | ||
541 | |||
542 | /* Select DPLL */ | ||
543 | REG_FLD_MOD(DSS_CONTROL, 0, 0, 0); | ||
544 | |||
545 | #ifdef CONFIG_OMAP2_DSS_VENC | ||
546 | REG_FLD_MOD(DSS_CONTROL, 1, 4, 4); /* venc dac demen */ | ||
547 | REG_FLD_MOD(DSS_CONTROL, 1, 3, 3); /* venc clock 4x enable */ | ||
548 | REG_FLD_MOD(DSS_CONTROL, 0, 2, 2); /* venc clock mode = normal */ | ||
549 | #endif | ||
550 | |||
551 | r = request_irq(INT_24XX_DSS_IRQ, | ||
552 | cpu_is_omap24xx() | ||
553 | ? dss_irq_handler_omap2 | ||
554 | : dss_irq_handler_omap3, | ||
555 | 0, "OMAP DSS", NULL); | ||
556 | |||
557 | if (r < 0) { | ||
558 | DSSERR("omap2 dss: request_irq failed\n"); | ||
559 | goto fail1; | ||
560 | } | ||
561 | |||
562 | if (cpu_is_omap34xx()) { | ||
563 | dss.dpll4_m4_ck = clk_get(NULL, "dpll4_m4_ck"); | ||
564 | if (IS_ERR(dss.dpll4_m4_ck)) { | ||
565 | DSSERR("Failed to get dpll4_m4_ck\n"); | ||
566 | r = PTR_ERR(dss.dpll4_m4_ck); | ||
567 | goto fail2; | ||
568 | } | ||
569 | } | ||
570 | |||
571 | dss_save_context(); | ||
572 | |||
573 | rev = dss_read_reg(DSS_REVISION); | ||
574 | printk(KERN_INFO "OMAP DSS rev %d.%d\n", | ||
575 | FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0)); | ||
576 | |||
577 | return 0; | ||
578 | |||
579 | fail2: | ||
580 | free_irq(INT_24XX_DSS_IRQ, NULL); | ||
581 | fail1: | ||
582 | iounmap(dss.base); | ||
583 | fail0: | ||
584 | return r; | ||
585 | } | ||
586 | |||
587 | void dss_exit(void) | ||
588 | { | ||
589 | if (cpu_is_omap34xx()) | ||
590 | clk_put(dss.dpll4_m4_ck); | ||
591 | |||
592 | free_irq(INT_24XX_DSS_IRQ, NULL); | ||
593 | |||
594 | iounmap(dss.base); | ||
595 | } | ||
596 | |||
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h new file mode 100644 index 000000000000..8da5ac42151b --- /dev/null +++ b/drivers/video/omap2/dss/dss.h | |||
@@ -0,0 +1,370 @@ | |||
1 | /* | ||
2 | * linux/drivers/video/omap2/dss/dss.h | ||
3 | * | ||
4 | * Copyright (C) 2009 Nokia Corporation | ||
5 | * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> | ||
6 | * | ||
7 | * Some code and ideas taken from drivers/video/omap/ driver | ||
8 | * by Imre Deak. | ||
9 | * | ||
10 | * This program is free software; you can redistribute it and/or modify it | ||
11 | * under the terms of the GNU General Public License version 2 as published by | ||
12 | * the Free Software Foundation. | ||
13 | * | ||
14 | * This program is distributed in the hope that it will be useful, but WITHOUT | ||
15 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | ||
16 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for | ||
17 | * more details. | ||
18 | * | ||
19 | * You should have received a copy of the GNU General Public License along with | ||
20 | * this program. If not, see <http://www.gnu.org/licenses/>. | ||
21 | */ | ||
22 | |||
23 | #ifndef __OMAP2_DSS_H | ||
24 | #define __OMAP2_DSS_H | ||
25 | |||
26 | #ifdef CONFIG_OMAP2_DSS_DEBUG_SUPPORT | ||
27 | #define DEBUG | ||
28 | #endif | ||
29 | |||
30 | #ifdef DEBUG | ||
31 | extern unsigned int dss_debug; | ||
32 | #ifdef DSS_SUBSYS_NAME | ||
33 | #define DSSDBG(format, ...) \ | ||
34 | if (dss_debug) \ | ||
35 | printk(KERN_DEBUG "omapdss " DSS_SUBSYS_NAME ": " format, \ | ||
36 | ## __VA_ARGS__) | ||
37 | #else | ||
38 | #define DSSDBG(format, ...) \ | ||
39 | if (dss_debug) \ | ||
40 | printk(KERN_DEBUG "omapdss: " format, ## __VA_ARGS__) | ||
41 | #endif | ||
42 | |||
43 | #ifdef DSS_SUBSYS_NAME | ||
44 | #define DSSDBGF(format, ...) \ | ||
45 | if (dss_debug) \ | ||
46 | printk(KERN_DEBUG "omapdss " DSS_SUBSYS_NAME \ | ||
47 | ": %s(" format ")\n", \ | ||
48 | __func__, \ | ||
49 | ## __VA_ARGS__) | ||
50 | #else | ||
51 | #define DSSDBGF(format, ...) \ | ||
52 | if (dss_debug) \ | ||
53 | printk(KERN_DEBUG "omapdss: " \ | ||
54 | ": %s(" format ")\n", \ | ||
55 | __func__, \ | ||
56 | ## __VA_ARGS__) | ||
57 | #endif | ||
58 | |||
59 | #else /* DEBUG */ | ||
60 | #define DSSDBG(format, ...) | ||
61 | #define DSSDBGF(format, ...) | ||
62 | #endif | ||
63 | |||
64 | |||
65 | #ifdef DSS_SUBSYS_NAME | ||
66 | #define DSSERR(format, ...) \ | ||
67 | printk(KERN_ERR "omapdss " DSS_SUBSYS_NAME " error: " format, \ | ||
68 | ## __VA_ARGS__) | ||
69 | #else | ||
70 | #define DSSERR(format, ...) \ | ||
71 | printk(KERN_ERR "omapdss error: " format, ## __VA_ARGS__) | ||
72 | #endif | ||
73 | |||
74 | #ifdef DSS_SUBSYS_NAME | ||
75 | #define DSSINFO(format, ...) \ | ||
76 | printk(KERN_INFO "omapdss " DSS_SUBSYS_NAME ": " format, \ | ||
77 | ## __VA_ARGS__) | ||
78 | #else | ||
79 | #define DSSINFO(format, ...) \ | ||
80 | printk(KERN_INFO "omapdss: " format, ## __VA_ARGS__) | ||
81 | #endif | ||
82 | |||
83 | #ifdef DSS_SUBSYS_NAME | ||
84 | #define DSSWARN(format, ...) \ | ||
85 | printk(KERN_WARNING "omapdss " DSS_SUBSYS_NAME ": " format, \ | ||
86 | ## __VA_ARGS__) | ||
87 | #else | ||
88 | #define DSSWARN(format, ...) \ | ||
89 | printk(KERN_WARNING "omapdss: " format, ## __VA_ARGS__) | ||
90 | #endif | ||
91 | |||
92 | /* OMAP TRM gives bitfields as start:end, where start is the higher bit | ||
93 | number. For example 7:0 */ | ||
94 | #define FLD_MASK(start, end) (((1 << ((start) - (end) + 1)) - 1) << (end)) | ||
95 | #define FLD_VAL(val, start, end) (((val) << (end)) & FLD_MASK(start, end)) | ||
96 | #define FLD_GET(val, start, end) (((val) & FLD_MASK(start, end)) >> (end)) | ||
97 | #define FLD_MOD(orig, val, start, end) \ | ||
98 | (((orig) & ~FLD_MASK(start, end)) | FLD_VAL(val, start, end)) | ||
99 | |||
100 | #define DISPC_MAX_FCK 173000000 | ||
101 | |||
102 | enum omap_burst_size { | ||
103 | OMAP_DSS_BURST_4x32 = 0, | ||
104 | OMAP_DSS_BURST_8x32 = 1, | ||
105 | OMAP_DSS_BURST_16x32 = 2, | ||
106 | }; | ||
107 | |||
108 | enum omap_parallel_interface_mode { | ||
109 | OMAP_DSS_PARALLELMODE_BYPASS, /* MIPI DPI */ | ||
110 | OMAP_DSS_PARALLELMODE_RFBI, /* MIPI DBI */ | ||
111 | OMAP_DSS_PARALLELMODE_DSI, | ||
112 | }; | ||
113 | |||
114 | enum dss_clock { | ||
115 | DSS_CLK_ICK = 1 << 0, | ||
116 | DSS_CLK_FCK1 = 1 << 1, | ||
117 | DSS_CLK_FCK2 = 1 << 2, | ||
118 | DSS_CLK_54M = 1 << 3, | ||
119 | DSS_CLK_96M = 1 << 4, | ||
120 | }; | ||
121 | |||
122 | struct dss_clock_info { | ||
123 | /* rates that we get with dividers below */ | ||
124 | unsigned long fck; | ||
125 | |||
126 | /* dividers */ | ||
127 | u16 fck_div; | ||
128 | }; | ||
129 | |||
130 | struct dispc_clock_info { | ||
131 | /* rates that we get with dividers below */ | ||
132 | unsigned long lck; | ||
133 | unsigned long pck; | ||
134 | |||
135 | /* dividers */ | ||
136 | u16 lck_div; | ||
137 | u16 pck_div; | ||
138 | }; | ||
139 | |||
140 | struct dsi_clock_info { | ||
141 | /* rates that we get with dividers below */ | ||
142 | unsigned long fint; | ||
143 | unsigned long clkin4ddr; | ||
144 | unsigned long clkin; | ||
145 | unsigned long dsi1_pll_fclk; | ||
146 | unsigned long dsi2_pll_fclk; | ||
147 | |||
148 | unsigned long lp_clk; | ||
149 | |||
150 | /* dividers */ | ||
151 | u16 regn; | ||
152 | u16 regm; | ||
153 | u16 regm3; | ||
154 | u16 regm4; | ||
155 | |||
156 | u16 lp_clk_div; | ||
157 | |||
158 | u8 highfreq; | ||
159 | bool use_dss2_fck; | ||
160 | }; | ||
161 | |||
162 | struct seq_file; | ||
163 | struct platform_device; | ||
164 | |||
165 | /* core */ | ||
166 | void dss_clk_enable(enum dss_clock clks); | ||
167 | void dss_clk_disable(enum dss_clock clks); | ||
168 | unsigned long dss_clk_get_rate(enum dss_clock clk); | ||
169 | int dss_need_ctx_restore(void); | ||
170 | void dss_dump_clocks(struct seq_file *s); | ||
171 | struct bus_type *dss_get_bus(void); | ||
172 | |||
173 | /* display */ | ||
174 | int dss_suspend_all_devices(void); | ||
175 | int dss_resume_all_devices(void); | ||
176 | void dss_disable_all_devices(void); | ||
177 | |||
178 | void dss_init_device(struct platform_device *pdev, | ||
179 | struct omap_dss_device *dssdev); | ||
180 | void dss_uninit_device(struct platform_device *pdev, | ||
181 | struct omap_dss_device *dssdev); | ||
182 | bool dss_use_replication(struct omap_dss_device *dssdev, | ||
183 | enum omap_color_mode mode); | ||
184 | void default_get_overlay_fifo_thresholds(enum omap_plane plane, | ||
185 | u32 fifo_size, enum omap_burst_size *burst_size, | ||
186 | u32 *fifo_low, u32 *fifo_high); | ||
187 | |||
188 | /* manager */ | ||
189 | int dss_init_overlay_managers(struct platform_device *pdev); | ||
190 | void dss_uninit_overlay_managers(struct platform_device *pdev); | ||
191 | int dss_mgr_wait_for_go_ovl(struct omap_overlay *ovl); | ||
192 | void dss_setup_partial_planes(struct omap_dss_device *dssdev, | ||
193 | u16 *x, u16 *y, u16 *w, u16 *h); | ||
194 | void dss_start_update(struct omap_dss_device *dssdev); | ||
195 | |||
196 | /* overlay */ | ||
197 | void dss_init_overlays(struct platform_device *pdev); | ||
198 | void dss_uninit_overlays(struct platform_device *pdev); | ||
199 | int dss_check_overlay(struct omap_overlay *ovl, struct omap_dss_device *dssdev); | ||
200 | void dss_overlay_setup_dispc_manager(struct omap_overlay_manager *mgr); | ||
201 | #ifdef L4_EXAMPLE | ||
202 | void dss_overlay_setup_l4_manager(struct omap_overlay_manager *mgr); | ||
203 | #endif | ||
204 | void dss_recheck_connections(struct omap_dss_device *dssdev, bool force); | ||
205 | |||
206 | /* DSS */ | ||
207 | int dss_init(bool skip_init); | ||
208 | void dss_exit(void); | ||
209 | |||
210 | void dss_save_context(void); | ||
211 | void dss_restore_context(void); | ||
212 | |||
213 | void dss_dump_regs(struct seq_file *s); | ||
214 | |||
215 | void dss_sdi_init(u8 datapairs); | ||
216 | int dss_sdi_enable(void); | ||
217 | void dss_sdi_disable(void); | ||
218 | |||
219 | void dss_select_clk_source(bool dsi, bool dispc); | ||
220 | int dss_get_dsi_clk_source(void); | ||
221 | int dss_get_dispc_clk_source(void); | ||
222 | void dss_set_venc_output(enum omap_dss_venc_type type); | ||
223 | void dss_set_dac_pwrdn_bgz(bool enable); | ||
224 | |||
225 | unsigned long dss_get_dpll4_rate(void); | ||
226 | int dss_calc_clock_rates(struct dss_clock_info *cinfo); | ||
227 | int dss_set_clock_div(struct dss_clock_info *cinfo); | ||
228 | int dss_get_clock_div(struct dss_clock_info *cinfo); | ||
229 | int dss_calc_clock_div(bool is_tft, unsigned long req_pck, | ||
230 | struct dss_clock_info *dss_cinfo, | ||
231 | struct dispc_clock_info *dispc_cinfo); | ||
232 | |||
233 | /* SDI */ | ||
234 | int sdi_init(bool skip_init); | ||
235 | void sdi_exit(void); | ||
236 | int sdi_init_display(struct omap_dss_device *display); | ||
237 | |||
238 | /* DSI */ | ||
239 | int dsi_init(struct platform_device *pdev); | ||
240 | void dsi_exit(void); | ||
241 | |||
242 | void dsi_dump_clocks(struct seq_file *s); | ||
243 | void dsi_dump_regs(struct seq_file *s); | ||
244 | |||
245 | void dsi_save_context(void); | ||
246 | void dsi_restore_context(void); | ||
247 | |||
248 | int dsi_init_display(struct omap_dss_device *display); | ||
249 | void dsi_irq_handler(void); | ||
250 | unsigned long dsi_get_dsi1_pll_rate(void); | ||
251 | int dsi_pll_set_clock_div(struct dsi_clock_info *cinfo); | ||
252 | int dsi_pll_calc_clock_div_pck(bool is_tft, unsigned long req_pck, | ||
253 | struct dsi_clock_info *cinfo, | ||
254 | struct dispc_clock_info *dispc_cinfo); | ||
255 | int dsi_pll_init(struct omap_dss_device *dssdev, bool enable_hsclk, | ||
256 | bool enable_hsdiv); | ||
257 | void dsi_pll_uninit(void); | ||
258 | void dsi_get_overlay_fifo_thresholds(enum omap_plane plane, | ||
259 | u32 fifo_size, enum omap_burst_size *burst_size, | ||
260 | u32 *fifo_low, u32 *fifo_high); | ||
261 | |||
262 | /* DPI */ | ||
263 | int dpi_init(void); | ||
264 | void dpi_exit(void); | ||
265 | int dpi_init_display(struct omap_dss_device *dssdev); | ||
266 | |||
267 | /* DISPC */ | ||
268 | int dispc_init(void); | ||
269 | void dispc_exit(void); | ||
270 | void dispc_dump_clocks(struct seq_file *s); | ||
271 | void dispc_dump_regs(struct seq_file *s); | ||
272 | void dispc_irq_handler(void); | ||
273 | void dispc_fake_vsync_irq(void); | ||
274 | |||
275 | void dispc_save_context(void); | ||
276 | void dispc_restore_context(void); | ||
277 | |||
278 | void dispc_enable_sidle(void); | ||
279 | void dispc_disable_sidle(void); | ||
280 | |||
281 | void dispc_lcd_enable_signal_polarity(bool act_high); | ||
282 | void dispc_lcd_enable_signal(bool enable); | ||
283 | void dispc_pck_free_enable(bool enable); | ||
284 | void dispc_enable_fifohandcheck(bool enable); | ||
285 | |||
286 | void dispc_set_lcd_size(u16 width, u16 height); | ||
287 | void dispc_set_digit_size(u16 width, u16 height); | ||
288 | u32 dispc_get_plane_fifo_size(enum omap_plane plane); | ||
289 | void dispc_setup_plane_fifo(enum omap_plane plane, u32 low, u32 high); | ||
290 | void dispc_enable_fifomerge(bool enable); | ||
291 | void dispc_set_burst_size(enum omap_plane plane, | ||
292 | enum omap_burst_size burst_size); | ||
293 | |||
294 | void dispc_set_plane_ba0(enum omap_plane plane, u32 paddr); | ||
295 | void dispc_set_plane_ba1(enum omap_plane plane, u32 paddr); | ||
296 | void dispc_set_plane_pos(enum omap_plane plane, u16 x, u16 y); | ||
297 | void dispc_set_plane_size(enum omap_plane plane, u16 width, u16 height); | ||
298 | void dispc_set_channel_out(enum omap_plane plane, | ||
299 | enum omap_channel channel_out); | ||
300 | |||
301 | int dispc_setup_plane(enum omap_plane plane, | ||
302 | u32 paddr, u16 screen_width, | ||
303 | u16 pos_x, u16 pos_y, | ||
304 | u16 width, u16 height, | ||
305 | u16 out_width, u16 out_height, | ||
306 | enum omap_color_mode color_mode, | ||
307 | bool ilace, | ||
308 | enum omap_dss_rotation_type rotation_type, | ||
309 | u8 rotation, bool mirror, | ||
310 | u8 global_alpha); | ||
311 | |||
312 | bool dispc_go_busy(enum omap_channel channel); | ||
313 | void dispc_go(enum omap_channel channel); | ||
314 | void dispc_enable_lcd_out(bool enable); | ||
315 | void dispc_enable_digit_out(bool enable); | ||
316 | int dispc_enable_plane(enum omap_plane plane, bool enable); | ||
317 | void dispc_enable_replication(enum omap_plane plane, bool enable); | ||
318 | |||
319 | void dispc_set_parallel_interface_mode(enum omap_parallel_interface_mode mode); | ||
320 | void dispc_set_tft_data_lines(u8 data_lines); | ||
321 | void dispc_set_lcd_display_type(enum omap_lcd_display_type type); | ||
322 | void dispc_set_loadmode(enum omap_dss_load_mode mode); | ||
323 | |||
324 | void dispc_set_default_color(enum omap_channel channel, u32 color); | ||
325 | u32 dispc_get_default_color(enum omap_channel channel); | ||
326 | void dispc_set_trans_key(enum omap_channel ch, | ||
327 | enum omap_dss_trans_key_type type, | ||
328 | u32 trans_key); | ||
329 | void dispc_get_trans_key(enum omap_channel ch, | ||
330 | enum omap_dss_trans_key_type *type, | ||
331 | u32 *trans_key); | ||
332 | void dispc_enable_trans_key(enum omap_channel ch, bool enable); | ||
333 | void dispc_enable_alpha_blending(enum omap_channel ch, bool enable); | ||
334 | bool dispc_trans_key_enabled(enum omap_channel ch); | ||
335 | bool dispc_alpha_blending_enabled(enum omap_channel ch); | ||
336 | |||
337 | bool dispc_lcd_timings_ok(struct omap_video_timings *timings); | ||
338 | void dispc_set_lcd_timings(struct omap_video_timings *timings); | ||
339 | unsigned long dispc_fclk_rate(void); | ||
340 | unsigned long dispc_lclk_rate(void); | ||
341 | unsigned long dispc_pclk_rate(void); | ||
342 | void dispc_set_pol_freq(enum omap_panel_config config, u8 acbi, u8 acb); | ||
343 | void dispc_find_clk_divs(bool is_tft, unsigned long req_pck, unsigned long fck, | ||
344 | struct dispc_clock_info *cinfo); | ||
345 | int dispc_calc_clock_rates(unsigned long dispc_fclk_rate, | ||
346 | struct dispc_clock_info *cinfo); | ||
347 | int dispc_set_clock_div(struct dispc_clock_info *cinfo); | ||
348 | int dispc_get_clock_div(struct dispc_clock_info *cinfo); | ||
349 | |||
350 | |||
351 | /* VENC */ | ||
352 | int venc_init(struct platform_device *pdev); | ||
353 | void venc_exit(void); | ||
354 | void venc_dump_regs(struct seq_file *s); | ||
355 | int venc_init_display(struct omap_dss_device *display); | ||
356 | |||
357 | /* RFBI */ | ||
358 | int rfbi_init(void); | ||
359 | void rfbi_exit(void); | ||
360 | void rfbi_dump_regs(struct seq_file *s); | ||
361 | |||
362 | int rfbi_configure(int rfbi_module, int bpp, int lines); | ||
363 | void rfbi_enable_rfbi(bool enable); | ||
364 | void rfbi_transfer_area(u16 width, u16 height, | ||
365 | void (callback)(void *data), void *data); | ||
366 | void rfbi_set_timings(int rfbi_module, struct rfbi_timings *t); | ||
367 | unsigned long rfbi_get_max_tx_rate(void); | ||
368 | int rfbi_init_display(struct omap_dss_device *display); | ||
369 | |||
370 | #endif | ||
diff --git a/drivers/video/omap2/dss/manager.c b/drivers/video/omap2/dss/manager.c new file mode 100644 index 000000000000..27d9c465c851 --- /dev/null +++ b/drivers/video/omap2/dss/manager.c | |||
@@ -0,0 +1,1487 @@ | |||
1 | /* | ||
2 | * linux/drivers/video/omap2/dss/manager.c | ||
3 | * | ||
4 | * Copyright (C) 2009 Nokia Corporation | ||
5 | * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> | ||
6 | * | ||
7 | * Some code and ideas taken from drivers/video/omap/ driver | ||
8 | * by Imre Deak. | ||
9 | * | ||
10 | * This program is free software; you can redistribute it and/or modify it | ||
11 | * under the terms of the GNU General Public License version 2 as published by | ||
12 | * the Free Software Foundation. | ||
13 | * | ||
14 | * This program is distributed in the hope that it will be useful, but WITHOUT | ||
15 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | ||
16 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for | ||
17 | * more details. | ||
18 | * | ||
19 | * You should have received a copy of the GNU General Public License along with | ||
20 | * this program. If not, see <http://www.gnu.org/licenses/>. | ||
21 | */ | ||
22 | |||
23 | #define DSS_SUBSYS_NAME "MANAGER" | ||
24 | |||
25 | #include <linux/kernel.h> | ||
26 | #include <linux/module.h> | ||
27 | #include <linux/platform_device.h> | ||
28 | #include <linux/spinlock.h> | ||
29 | #include <linux/jiffies.h> | ||
30 | |||
31 | #include <plat/display.h> | ||
32 | #include <plat/cpu.h> | ||
33 | |||
34 | #include "dss.h" | ||
35 | |||
36 | static int num_managers; | ||
37 | static struct list_head manager_list; | ||
38 | |||
39 | static ssize_t manager_name_show(struct omap_overlay_manager *mgr, char *buf) | ||
40 | { | ||
41 | return snprintf(buf, PAGE_SIZE, "%s\n", mgr->name); | ||
42 | } | ||
43 | |||
44 | static ssize_t manager_display_show(struct omap_overlay_manager *mgr, char *buf) | ||
45 | { | ||
46 | return snprintf(buf, PAGE_SIZE, "%s\n", | ||
47 | mgr->device ? mgr->device->name : "<none>"); | ||
48 | } | ||
49 | |||
50 | static ssize_t manager_display_store(struct omap_overlay_manager *mgr, | ||
51 | const char *buf, size_t size) | ||
52 | { | ||
53 | int r = 0; | ||
54 | size_t len = size; | ||
55 | struct omap_dss_device *dssdev = NULL; | ||
56 | |||
57 | int match(struct omap_dss_device *dssdev, void *data) | ||
58 | { | ||
59 | const char *str = data; | ||
60 | return sysfs_streq(dssdev->name, str); | ||
61 | } | ||
62 | |||
63 | if (buf[size-1] == '\n') | ||
64 | --len; | ||
65 | |||
66 | if (len > 0) | ||
67 | dssdev = omap_dss_find_device((void *)buf, match); | ||
68 | |||
69 | if (len > 0 && dssdev == NULL) | ||
70 | return -EINVAL; | ||
71 | |||
72 | if (dssdev) | ||
73 | DSSDBG("display %s found\n", dssdev->name); | ||
74 | |||
75 | if (mgr->device) { | ||
76 | r = mgr->unset_device(mgr); | ||
77 | if (r) { | ||
78 | DSSERR("failed to unset display\n"); | ||
79 | goto put_device; | ||
80 | } | ||
81 | } | ||
82 | |||
83 | if (dssdev) { | ||
84 | r = mgr->set_device(mgr, dssdev); | ||
85 | if (r) { | ||
86 | DSSERR("failed to set manager\n"); | ||
87 | goto put_device; | ||
88 | } | ||
89 | |||
90 | r = mgr->apply(mgr); | ||
91 | if (r) { | ||
92 | DSSERR("failed to apply dispc config\n"); | ||
93 | goto put_device; | ||
94 | } | ||
95 | } | ||
96 | |||
97 | put_device: | ||
98 | if (dssdev) | ||
99 | omap_dss_put_device(dssdev); | ||
100 | |||
101 | return r ? r : size; | ||
102 | } | ||
103 | |||
104 | static ssize_t manager_default_color_show(struct omap_overlay_manager *mgr, | ||
105 | char *buf) | ||
106 | { | ||
107 | return snprintf(buf, PAGE_SIZE, "%d\n", mgr->info.default_color); | ||
108 | } | ||
109 | |||
110 | static ssize_t manager_default_color_store(struct omap_overlay_manager *mgr, | ||
111 | const char *buf, size_t size) | ||
112 | { | ||
113 | struct omap_overlay_manager_info info; | ||
114 | u32 color; | ||
115 | int r; | ||
116 | |||
117 | if (sscanf(buf, "%d", &color) != 1) | ||
118 | return -EINVAL; | ||
119 | |||
120 | mgr->get_manager_info(mgr, &info); | ||
121 | |||
122 | info.default_color = color; | ||
123 | |||
124 | r = mgr->set_manager_info(mgr, &info); | ||
125 | if (r) | ||
126 | return r; | ||
127 | |||
128 | r = mgr->apply(mgr); | ||
129 | if (r) | ||
130 | return r; | ||
131 | |||
132 | return size; | ||
133 | } | ||
134 | |||
135 | static const char *trans_key_type_str[] = { | ||
136 | "gfx-destination", | ||
137 | "video-source", | ||
138 | }; | ||
139 | |||
140 | static ssize_t manager_trans_key_type_show(struct omap_overlay_manager *mgr, | ||
141 | char *buf) | ||
142 | { | ||
143 | enum omap_dss_trans_key_type key_type; | ||
144 | |||
145 | key_type = mgr->info.trans_key_type; | ||
146 | BUG_ON(key_type >= ARRAY_SIZE(trans_key_type_str)); | ||
147 | |||
148 | return snprintf(buf, PAGE_SIZE, "%s\n", trans_key_type_str[key_type]); | ||
149 | } | ||
150 | |||
151 | static ssize_t manager_trans_key_type_store(struct omap_overlay_manager *mgr, | ||
152 | const char *buf, size_t size) | ||
153 | { | ||
154 | enum omap_dss_trans_key_type key_type; | ||
155 | struct omap_overlay_manager_info info; | ||
156 | int r; | ||
157 | |||
158 | for (key_type = OMAP_DSS_COLOR_KEY_GFX_DST; | ||
159 | key_type < ARRAY_SIZE(trans_key_type_str); key_type++) { | ||
160 | if (sysfs_streq(buf, trans_key_type_str[key_type])) | ||
161 | break; | ||
162 | } | ||
163 | |||
164 | if (key_type == ARRAY_SIZE(trans_key_type_str)) | ||
165 | return -EINVAL; | ||
166 | |||
167 | mgr->get_manager_info(mgr, &info); | ||
168 | |||
169 | info.trans_key_type = key_type; | ||
170 | |||
171 | r = mgr->set_manager_info(mgr, &info); | ||
172 | if (r) | ||
173 | return r; | ||
174 | |||
175 | r = mgr->apply(mgr); | ||
176 | if (r) | ||
177 | return r; | ||
178 | |||
179 | return size; | ||
180 | } | ||
181 | |||
182 | static ssize_t manager_trans_key_value_show(struct omap_overlay_manager *mgr, | ||
183 | char *buf) | ||
184 | { | ||
185 | return snprintf(buf, PAGE_SIZE, "%d\n", mgr->info.trans_key); | ||
186 | } | ||
187 | |||
188 | static ssize_t manager_trans_key_value_store(struct omap_overlay_manager *mgr, | ||
189 | const char *buf, size_t size) | ||
190 | { | ||
191 | struct omap_overlay_manager_info info; | ||
192 | u32 key_value; | ||
193 | int r; | ||
194 | |||
195 | if (sscanf(buf, "%d", &key_value) != 1) | ||
196 | return -EINVAL; | ||
197 | |||
198 | mgr->get_manager_info(mgr, &info); | ||
199 | |||
200 | info.trans_key = key_value; | ||
201 | |||
202 | r = mgr->set_manager_info(mgr, &info); | ||
203 | if (r) | ||
204 | return r; | ||
205 | |||
206 | r = mgr->apply(mgr); | ||
207 | if (r) | ||
208 | return r; | ||
209 | |||
210 | return size; | ||
211 | } | ||
212 | |||
213 | static ssize_t manager_trans_key_enabled_show(struct omap_overlay_manager *mgr, | ||
214 | char *buf) | ||
215 | { | ||
216 | return snprintf(buf, PAGE_SIZE, "%d\n", mgr->info.trans_enabled); | ||
217 | } | ||
218 | |||
219 | static ssize_t manager_trans_key_enabled_store(struct omap_overlay_manager *mgr, | ||
220 | const char *buf, size_t size) | ||
221 | { | ||
222 | struct omap_overlay_manager_info info; | ||
223 | int enable; | ||
224 | int r; | ||
225 | |||
226 | if (sscanf(buf, "%d", &enable) != 1) | ||
227 | return -EINVAL; | ||
228 | |||
229 | mgr->get_manager_info(mgr, &info); | ||
230 | |||
231 | info.trans_enabled = enable ? true : false; | ||
232 | |||
233 | r = mgr->set_manager_info(mgr, &info); | ||
234 | if (r) | ||
235 | return r; | ||
236 | |||
237 | r = mgr->apply(mgr); | ||
238 | if (r) | ||
239 | return r; | ||
240 | |||
241 | return size; | ||
242 | } | ||
243 | |||
244 | static ssize_t manager_alpha_blending_enabled_show( | ||
245 | struct omap_overlay_manager *mgr, char *buf) | ||
246 | { | ||
247 | return snprintf(buf, PAGE_SIZE, "%d\n", mgr->info.alpha_enabled); | ||
248 | } | ||
249 | |||
250 | static ssize_t manager_alpha_blending_enabled_store( | ||
251 | struct omap_overlay_manager *mgr, | ||
252 | const char *buf, size_t size) | ||
253 | { | ||
254 | struct omap_overlay_manager_info info; | ||
255 | int enable; | ||
256 | int r; | ||
257 | |||
258 | if (sscanf(buf, "%d", &enable) != 1) | ||
259 | return -EINVAL; | ||
260 | |||
261 | mgr->get_manager_info(mgr, &info); | ||
262 | |||
263 | info.alpha_enabled = enable ? true : false; | ||
264 | |||
265 | r = mgr->set_manager_info(mgr, &info); | ||
266 | if (r) | ||
267 | return r; | ||
268 | |||
269 | r = mgr->apply(mgr); | ||
270 | if (r) | ||
271 | return r; | ||
272 | |||
273 | return size; | ||
274 | } | ||
275 | |||
276 | struct manager_attribute { | ||
277 | struct attribute attr; | ||
278 | ssize_t (*show)(struct omap_overlay_manager *, char *); | ||
279 | ssize_t (*store)(struct omap_overlay_manager *, const char *, size_t); | ||
280 | }; | ||
281 | |||
282 | #define MANAGER_ATTR(_name, _mode, _show, _store) \ | ||
283 | struct manager_attribute manager_attr_##_name = \ | ||
284 | __ATTR(_name, _mode, _show, _store) | ||
285 | |||
286 | static MANAGER_ATTR(name, S_IRUGO, manager_name_show, NULL); | ||
287 | static MANAGER_ATTR(display, S_IRUGO|S_IWUSR, | ||
288 | manager_display_show, manager_display_store); | ||
289 | static MANAGER_ATTR(default_color, S_IRUGO|S_IWUSR, | ||
290 | manager_default_color_show, manager_default_color_store); | ||
291 | static MANAGER_ATTR(trans_key_type, S_IRUGO|S_IWUSR, | ||
292 | manager_trans_key_type_show, manager_trans_key_type_store); | ||
293 | static MANAGER_ATTR(trans_key_value, S_IRUGO|S_IWUSR, | ||
294 | manager_trans_key_value_show, manager_trans_key_value_store); | ||
295 | static MANAGER_ATTR(trans_key_enabled, S_IRUGO|S_IWUSR, | ||
296 | manager_trans_key_enabled_show, | ||
297 | manager_trans_key_enabled_store); | ||
298 | static MANAGER_ATTR(alpha_blending_enabled, S_IRUGO|S_IWUSR, | ||
299 | manager_alpha_blending_enabled_show, | ||
300 | manager_alpha_blending_enabled_store); | ||
301 | |||
302 | |||
303 | static struct attribute *manager_sysfs_attrs[] = { | ||
304 | &manager_attr_name.attr, | ||
305 | &manager_attr_display.attr, | ||
306 | &manager_attr_default_color.attr, | ||
307 | &manager_attr_trans_key_type.attr, | ||
308 | &manager_attr_trans_key_value.attr, | ||
309 | &manager_attr_trans_key_enabled.attr, | ||
310 | &manager_attr_alpha_blending_enabled.attr, | ||
311 | NULL | ||
312 | }; | ||
313 | |||
314 | static ssize_t manager_attr_show(struct kobject *kobj, struct attribute *attr, | ||
315 | char *buf) | ||
316 | { | ||
317 | struct omap_overlay_manager *manager; | ||
318 | struct manager_attribute *manager_attr; | ||
319 | |||
320 | manager = container_of(kobj, struct omap_overlay_manager, kobj); | ||
321 | manager_attr = container_of(attr, struct manager_attribute, attr); | ||
322 | |||
323 | if (!manager_attr->show) | ||
324 | return -ENOENT; | ||
325 | |||
326 | return manager_attr->show(manager, buf); | ||
327 | } | ||
328 | |||
329 | static ssize_t manager_attr_store(struct kobject *kobj, struct attribute *attr, | ||
330 | const char *buf, size_t size) | ||
331 | { | ||
332 | struct omap_overlay_manager *manager; | ||
333 | struct manager_attribute *manager_attr; | ||
334 | |||
335 | manager = container_of(kobj, struct omap_overlay_manager, kobj); | ||
336 | manager_attr = container_of(attr, struct manager_attribute, attr); | ||
337 | |||
338 | if (!manager_attr->store) | ||
339 | return -ENOENT; | ||
340 | |||
341 | return manager_attr->store(manager, buf, size); | ||
342 | } | ||
343 | |||
344 | static struct sysfs_ops manager_sysfs_ops = { | ||
345 | .show = manager_attr_show, | ||
346 | .store = manager_attr_store, | ||
347 | }; | ||
348 | |||
349 | static struct kobj_type manager_ktype = { | ||
350 | .sysfs_ops = &manager_sysfs_ops, | ||
351 | .default_attrs = manager_sysfs_attrs, | ||
352 | }; | ||
353 | |||
354 | /* | ||
355 | * We have 4 levels of cache for the dispc settings. First two are in SW and | ||
356 | * the latter two in HW. | ||
357 | * | ||
358 | * +--------------------+ | ||
359 | * |overlay/manager_info| | ||
360 | * +--------------------+ | ||
361 | * v | ||
362 | * apply() | ||
363 | * v | ||
364 | * +--------------------+ | ||
365 | * | dss_cache | | ||
366 | * +--------------------+ | ||
367 | * v | ||
368 | * configure() | ||
369 | * v | ||
370 | * +--------------------+ | ||
371 | * | shadow registers | | ||
372 | * +--------------------+ | ||
373 | * v | ||
374 | * VFP or lcd/digit_enable | ||
375 | * v | ||
376 | * +--------------------+ | ||
377 | * | registers | | ||
378 | * +--------------------+ | ||
379 | */ | ||
380 | |||
381 | struct overlay_cache_data { | ||
382 | /* If true, cache changed, but not written to shadow registers. Set | ||
383 | * in apply(), cleared when registers written. */ | ||
384 | bool dirty; | ||
385 | /* If true, shadow registers contain changed values not yet in real | ||
386 | * registers. Set when writing to shadow registers, cleared at | ||
387 | * VSYNC/EVSYNC */ | ||
388 | bool shadow_dirty; | ||
389 | |||
390 | bool enabled; | ||
391 | |||
392 | u32 paddr; | ||
393 | void __iomem *vaddr; | ||
394 | u16 screen_width; | ||
395 | u16 width; | ||
396 | u16 height; | ||
397 | enum omap_color_mode color_mode; | ||
398 | u8 rotation; | ||
399 | enum omap_dss_rotation_type rotation_type; | ||
400 | bool mirror; | ||
401 | |||
402 | u16 pos_x; | ||
403 | u16 pos_y; | ||
404 | u16 out_width; /* if 0, out_width == width */ | ||
405 | u16 out_height; /* if 0, out_height == height */ | ||
406 | u8 global_alpha; | ||
407 | |||
408 | enum omap_channel channel; | ||
409 | bool replication; | ||
410 | bool ilace; | ||
411 | |||
412 | enum omap_burst_size burst_size; | ||
413 | u32 fifo_low; | ||
414 | u32 fifo_high; | ||
415 | |||
416 | bool manual_update; | ||
417 | }; | ||
418 | |||
419 | struct manager_cache_data { | ||
420 | /* If true, cache changed, but not written to shadow registers. Set | ||
421 | * in apply(), cleared when registers written. */ | ||
422 | bool dirty; | ||
423 | /* If true, shadow registers contain changed values not yet in real | ||
424 | * registers. Set when writing to shadow registers, cleared at | ||
425 | * VSYNC/EVSYNC */ | ||
426 | bool shadow_dirty; | ||
427 | |||
428 | u32 default_color; | ||
429 | |||
430 | enum omap_dss_trans_key_type trans_key_type; | ||
431 | u32 trans_key; | ||
432 | bool trans_enabled; | ||
433 | |||
434 | bool alpha_enabled; | ||
435 | |||
436 | bool manual_upd_display; | ||
437 | bool manual_update; | ||
438 | bool do_manual_update; | ||
439 | |||
440 | /* manual update region */ | ||
441 | u16 x, y, w, h; | ||
442 | }; | ||
443 | |||
444 | static struct { | ||
445 | spinlock_t lock; | ||
446 | struct overlay_cache_data overlay_cache[3]; | ||
447 | struct manager_cache_data manager_cache[2]; | ||
448 | |||
449 | bool irq_enabled; | ||
450 | } dss_cache; | ||
451 | |||
452 | |||
453 | |||
454 | static int omap_dss_set_device(struct omap_overlay_manager *mgr, | ||
455 | struct omap_dss_device *dssdev) | ||
456 | { | ||
457 | int i; | ||
458 | int r; | ||
459 | |||
460 | if (dssdev->manager) { | ||
461 | DSSERR("display '%s' already has a manager '%s'\n", | ||
462 | dssdev->name, dssdev->manager->name); | ||
463 | return -EINVAL; | ||
464 | } | ||
465 | |||
466 | if ((mgr->supported_displays & dssdev->type) == 0) { | ||
467 | DSSERR("display '%s' does not support manager '%s'\n", | ||
468 | dssdev->name, mgr->name); | ||
469 | return -EINVAL; | ||
470 | } | ||
471 | |||
472 | for (i = 0; i < mgr->num_overlays; i++) { | ||
473 | struct omap_overlay *ovl = mgr->overlays[i]; | ||
474 | |||
475 | if (ovl->manager != mgr || !ovl->info.enabled) | ||
476 | continue; | ||
477 | |||
478 | r = dss_check_overlay(ovl, dssdev); | ||
479 | if (r) | ||
480 | return r; | ||
481 | } | ||
482 | |||
483 | dssdev->manager = mgr; | ||
484 | mgr->device = dssdev; | ||
485 | mgr->device_changed = true; | ||
486 | |||
487 | return 0; | ||
488 | } | ||
489 | |||
490 | static int omap_dss_unset_device(struct omap_overlay_manager *mgr) | ||
491 | { | ||
492 | if (!mgr->device) { | ||
493 | DSSERR("failed to unset display, display not set.\n"); | ||
494 | return -EINVAL; | ||
495 | } | ||
496 | |||
497 | mgr->device->manager = NULL; | ||
498 | mgr->device = NULL; | ||
499 | mgr->device_changed = true; | ||
500 | |||
501 | return 0; | ||
502 | } | ||
503 | |||
504 | static int dss_mgr_wait_for_go(struct omap_overlay_manager *mgr) | ||
505 | { | ||
506 | unsigned long timeout = msecs_to_jiffies(500); | ||
507 | struct manager_cache_data *mc; | ||
508 | enum omap_channel channel; | ||
509 | u32 irq; | ||
510 | int r; | ||
511 | int i; | ||
512 | |||
513 | if (!mgr->device) | ||
514 | return 0; | ||
515 | |||
516 | if (mgr->device->type == OMAP_DISPLAY_TYPE_VENC) { | ||
517 | irq = DISPC_IRQ_EVSYNC_ODD | DISPC_IRQ_EVSYNC_EVEN; | ||
518 | channel = OMAP_DSS_CHANNEL_DIGIT; | ||
519 | } else { | ||
520 | if (mgr->device->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE) { | ||
521 | enum omap_dss_update_mode mode; | ||
522 | mode = mgr->device->get_update_mode(mgr->device); | ||
523 | if (mode != OMAP_DSS_UPDATE_AUTO) | ||
524 | return 0; | ||
525 | |||
526 | irq = DISPC_IRQ_FRAMEDONE; | ||
527 | } else { | ||
528 | irq = DISPC_IRQ_VSYNC; | ||
529 | } | ||
530 | channel = OMAP_DSS_CHANNEL_LCD; | ||
531 | } | ||
532 | |||
533 | mc = &dss_cache.manager_cache[mgr->id]; | ||
534 | i = 0; | ||
535 | while (1) { | ||
536 | unsigned long flags; | ||
537 | bool shadow_dirty, dirty; | ||
538 | |||
539 | spin_lock_irqsave(&dss_cache.lock, flags); | ||
540 | dirty = mc->dirty; | ||
541 | shadow_dirty = mc->shadow_dirty; | ||
542 | spin_unlock_irqrestore(&dss_cache.lock, flags); | ||
543 | |||
544 | if (!dirty && !shadow_dirty) { | ||
545 | r = 0; | ||
546 | break; | ||
547 | } | ||
548 | |||
549 | /* 4 iterations is the worst case: | ||
550 | * 1 - initial iteration, dirty = true (between VFP and VSYNC) | ||
551 | * 2 - first VSYNC, dirty = true | ||
552 | * 3 - dirty = false, shadow_dirty = true | ||
553 | * 4 - shadow_dirty = false */ | ||
554 | if (i++ == 3) { | ||
555 | DSSERR("mgr(%d)->wait_for_go() not finishing\n", | ||
556 | mgr->id); | ||
557 | r = 0; | ||
558 | break; | ||
559 | } | ||
560 | |||
561 | r = omap_dispc_wait_for_irq_interruptible_timeout(irq, timeout); | ||
562 | if (r == -ERESTARTSYS) | ||
563 | break; | ||
564 | |||
565 | if (r) { | ||
566 | DSSERR("mgr(%d)->wait_for_go() timeout\n", mgr->id); | ||
567 | break; | ||
568 | } | ||
569 | } | ||
570 | |||
571 | return r; | ||
572 | } | ||
573 | |||
574 | int dss_mgr_wait_for_go_ovl(struct omap_overlay *ovl) | ||
575 | { | ||
576 | unsigned long timeout = msecs_to_jiffies(500); | ||
577 | enum omap_channel channel; | ||
578 | struct overlay_cache_data *oc; | ||
579 | struct omap_dss_device *dssdev; | ||
580 | u32 irq; | ||
581 | int r; | ||
582 | int i; | ||
583 | |||
584 | if (!ovl->manager || !ovl->manager->device) | ||
585 | return 0; | ||
586 | |||
587 | dssdev = ovl->manager->device; | ||
588 | |||
589 | if (dssdev->type == OMAP_DISPLAY_TYPE_VENC) { | ||
590 | irq = DISPC_IRQ_EVSYNC_ODD | DISPC_IRQ_EVSYNC_EVEN; | ||
591 | channel = OMAP_DSS_CHANNEL_DIGIT; | ||
592 | } else { | ||
593 | if (dssdev->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE) { | ||
594 | enum omap_dss_update_mode mode; | ||
595 | mode = dssdev->get_update_mode(dssdev); | ||
596 | if (mode != OMAP_DSS_UPDATE_AUTO) | ||
597 | return 0; | ||
598 | |||
599 | irq = DISPC_IRQ_FRAMEDONE; | ||
600 | } else { | ||
601 | irq = DISPC_IRQ_VSYNC; | ||
602 | } | ||
603 | channel = OMAP_DSS_CHANNEL_LCD; | ||
604 | } | ||
605 | |||
606 | oc = &dss_cache.overlay_cache[ovl->id]; | ||
607 | i = 0; | ||
608 | while (1) { | ||
609 | unsigned long flags; | ||
610 | bool shadow_dirty, dirty; | ||
611 | |||
612 | spin_lock_irqsave(&dss_cache.lock, flags); | ||
613 | dirty = oc->dirty; | ||
614 | shadow_dirty = oc->shadow_dirty; | ||
615 | spin_unlock_irqrestore(&dss_cache.lock, flags); | ||
616 | |||
617 | if (!dirty && !shadow_dirty) { | ||
618 | r = 0; | ||
619 | break; | ||
620 | } | ||
621 | |||
622 | /* 4 iterations is the worst case: | ||
623 | * 1 - initial iteration, dirty = true (between VFP and VSYNC) | ||
624 | * 2 - first VSYNC, dirty = true | ||
625 | * 3 - dirty = false, shadow_dirty = true | ||
626 | * 4 - shadow_dirty = false */ | ||
627 | if (i++ == 3) { | ||
628 | DSSERR("ovl(%d)->wait_for_go() not finishing\n", | ||
629 | ovl->id); | ||
630 | r = 0; | ||
631 | break; | ||
632 | } | ||
633 | |||
634 | r = omap_dispc_wait_for_irq_interruptible_timeout(irq, timeout); | ||
635 | if (r == -ERESTARTSYS) | ||
636 | break; | ||
637 | |||
638 | if (r) { | ||
639 | DSSERR("ovl(%d)->wait_for_go() timeout\n", ovl->id); | ||
640 | break; | ||
641 | } | ||
642 | } | ||
643 | |||
644 | return r; | ||
645 | } | ||
646 | |||
647 | static int overlay_enabled(struct omap_overlay *ovl) | ||
648 | { | ||
649 | return ovl->info.enabled && ovl->manager && ovl->manager->device; | ||
650 | } | ||
651 | |||
652 | /* Is rect1 a subset of rect2? */ | ||
653 | static bool rectangle_subset(int x1, int y1, int w1, int h1, | ||
654 | int x2, int y2, int w2, int h2) | ||
655 | { | ||
656 | if (x1 < x2 || y1 < y2) | ||
657 | return false; | ||
658 | |||
659 | if (x1 + w1 > x2 + w2) | ||
660 | return false; | ||
661 | |||
662 | if (y1 + h1 > y2 + h2) | ||
663 | return false; | ||
664 | |||
665 | return true; | ||
666 | } | ||
667 | |||
668 | /* Do rect1 and rect2 overlap? */ | ||
669 | static bool rectangle_intersects(int x1, int y1, int w1, int h1, | ||
670 | int x2, int y2, int w2, int h2) | ||
671 | { | ||
672 | if (x1 >= x2 + w2) | ||
673 | return false; | ||
674 | |||
675 | if (x2 >= x1 + w1) | ||
676 | return false; | ||
677 | |||
678 | if (y1 >= y2 + h2) | ||
679 | return false; | ||
680 | |||
681 | if (y2 >= y1 + h1) | ||
682 | return false; | ||
683 | |||
684 | return true; | ||
685 | } | ||
686 | |||
687 | static bool dispc_is_overlay_scaled(struct overlay_cache_data *oc) | ||
688 | { | ||
689 | if (oc->out_width != 0 && oc->width != oc->out_width) | ||
690 | return true; | ||
691 | |||
692 | if (oc->out_height != 0 && oc->height != oc->out_height) | ||
693 | return true; | ||
694 | |||
695 | return false; | ||
696 | } | ||
697 | |||
698 | static int configure_overlay(enum omap_plane plane) | ||
699 | { | ||
700 | struct overlay_cache_data *c; | ||
701 | struct manager_cache_data *mc; | ||
702 | u16 outw, outh; | ||
703 | u16 x, y, w, h; | ||
704 | u32 paddr; | ||
705 | int r; | ||
706 | |||
707 | DSSDBGF("%d", plane); | ||
708 | |||
709 | c = &dss_cache.overlay_cache[plane]; | ||
710 | |||
711 | if (!c->enabled) { | ||
712 | dispc_enable_plane(plane, 0); | ||
713 | return 0; | ||
714 | } | ||
715 | |||
716 | mc = &dss_cache.manager_cache[c->channel]; | ||
717 | |||
718 | x = c->pos_x; | ||
719 | y = c->pos_y; | ||
720 | w = c->width; | ||
721 | h = c->height; | ||
722 | outw = c->out_width == 0 ? c->width : c->out_width; | ||
723 | outh = c->out_height == 0 ? c->height : c->out_height; | ||
724 | paddr = c->paddr; | ||
725 | |||
726 | if (c->manual_update && mc->do_manual_update) { | ||
727 | unsigned bpp; | ||
728 | /* If the overlay is outside the update region, disable it */ | ||
729 | if (!rectangle_intersects(mc->x, mc->y, mc->w, mc->h, | ||
730 | x, y, outw, outh)) { | ||
731 | dispc_enable_plane(plane, 0); | ||
732 | return 0; | ||
733 | } | ||
734 | |||
735 | switch (c->color_mode) { | ||
736 | case OMAP_DSS_COLOR_RGB16: | ||
737 | case OMAP_DSS_COLOR_ARGB16: | ||
738 | case OMAP_DSS_COLOR_YUV2: | ||
739 | case OMAP_DSS_COLOR_UYVY: | ||
740 | bpp = 16; | ||
741 | break; | ||
742 | |||
743 | case OMAP_DSS_COLOR_RGB24P: | ||
744 | bpp = 24; | ||
745 | break; | ||
746 | |||
747 | case OMAP_DSS_COLOR_RGB24U: | ||
748 | case OMAP_DSS_COLOR_ARGB32: | ||
749 | case OMAP_DSS_COLOR_RGBA32: | ||
750 | case OMAP_DSS_COLOR_RGBX32: | ||
751 | bpp = 32; | ||
752 | break; | ||
753 | |||
754 | default: | ||
755 | BUG(); | ||
756 | } | ||
757 | |||
758 | if (dispc_is_overlay_scaled(c)) { | ||
759 | /* If the overlay is scaled, the update area has | ||
760 | * already been enlarged to cover the whole overlay. We | ||
761 | * only need to adjust x/y here */ | ||
762 | x = c->pos_x - mc->x; | ||
763 | y = c->pos_y - mc->y; | ||
764 | } else { | ||
765 | if (mc->x > c->pos_x) { | ||
766 | x = 0; | ||
767 | w -= (mc->x - c->pos_x); | ||
768 | paddr += (mc->x - c->pos_x) * bpp / 8; | ||
769 | } else { | ||
770 | x = c->pos_x - mc->x; | ||
771 | } | ||
772 | |||
773 | if (mc->y > c->pos_y) { | ||
774 | y = 0; | ||
775 | h -= (mc->y - c->pos_y); | ||
776 | paddr += (mc->y - c->pos_y) * c->screen_width * | ||
777 | bpp / 8; | ||
778 | } else { | ||
779 | y = c->pos_y - mc->y; | ||
780 | } | ||
781 | |||
782 | if (mc->w < (x+w)) | ||
783 | w -= (x+w) - (mc->w); | ||
784 | |||
785 | if (mc->h < (y+h)) | ||
786 | h -= (y+h) - (mc->h); | ||
787 | |||
788 | outw = w; | ||
789 | outh = h; | ||
790 | } | ||
791 | } | ||
792 | |||
793 | r = dispc_setup_plane(plane, | ||
794 | paddr, | ||
795 | c->screen_width, | ||
796 | x, y, | ||
797 | w, h, | ||
798 | outw, outh, | ||
799 | c->color_mode, | ||
800 | c->ilace, | ||
801 | c->rotation_type, | ||
802 | c->rotation, | ||
803 | c->mirror, | ||
804 | c->global_alpha); | ||
805 | |||
806 | if (r) { | ||
807 | /* this shouldn't happen */ | ||
808 | DSSERR("dispc_setup_plane failed for ovl %d\n", plane); | ||
809 | dispc_enable_plane(plane, 0); | ||
810 | return r; | ||
811 | } | ||
812 | |||
813 | dispc_enable_replication(plane, c->replication); | ||
814 | |||
815 | dispc_set_burst_size(plane, c->burst_size); | ||
816 | dispc_setup_plane_fifo(plane, c->fifo_low, c->fifo_high); | ||
817 | |||
818 | dispc_enable_plane(plane, 1); | ||
819 | |||
820 | return 0; | ||
821 | } | ||
822 | |||
823 | static void configure_manager(enum omap_channel channel) | ||
824 | { | ||
825 | struct manager_cache_data *c; | ||
826 | |||
827 | DSSDBGF("%d", channel); | ||
828 | |||
829 | c = &dss_cache.manager_cache[channel]; | ||
830 | |||
831 | dispc_set_trans_key(channel, c->trans_key_type, c->trans_key); | ||
832 | dispc_enable_trans_key(channel, c->trans_enabled); | ||
833 | dispc_enable_alpha_blending(channel, c->alpha_enabled); | ||
834 | } | ||
835 | |||
836 | /* configure_dispc() tries to write values from cache to shadow registers. | ||
837 | * It writes only to those managers/overlays that are not busy. | ||
838 | * returns 0 if everything could be written to shadow registers. | ||
839 | * returns 1 if not everything could be written to shadow registers. */ | ||
840 | static int configure_dispc(void) | ||
841 | { | ||
842 | struct overlay_cache_data *oc; | ||
843 | struct manager_cache_data *mc; | ||
844 | const int num_ovls = ARRAY_SIZE(dss_cache.overlay_cache); | ||
845 | const int num_mgrs = ARRAY_SIZE(dss_cache.manager_cache); | ||
846 | int i; | ||
847 | int r; | ||
848 | bool mgr_busy[2]; | ||
849 | bool mgr_go[2]; | ||
850 | bool busy; | ||
851 | |||
852 | r = 0; | ||
853 | busy = false; | ||
854 | |||
855 | mgr_busy[0] = dispc_go_busy(0); | ||
856 | mgr_busy[1] = dispc_go_busy(1); | ||
857 | mgr_go[0] = false; | ||
858 | mgr_go[1] = false; | ||
859 | |||
860 | /* Commit overlay settings */ | ||
861 | for (i = 0; i < num_ovls; ++i) { | ||
862 | oc = &dss_cache.overlay_cache[i]; | ||
863 | mc = &dss_cache.manager_cache[oc->channel]; | ||
864 | |||
865 | if (!oc->dirty) | ||
866 | continue; | ||
867 | |||
868 | if (oc->manual_update && !mc->do_manual_update) | ||
869 | continue; | ||
870 | |||
871 | if (mgr_busy[oc->channel]) { | ||
872 | busy = true; | ||
873 | continue; | ||
874 | } | ||
875 | |||
876 | r = configure_overlay(i); | ||
877 | if (r) | ||
878 | DSSERR("configure_overlay %d failed\n", i); | ||
879 | |||
880 | oc->dirty = false; | ||
881 | oc->shadow_dirty = true; | ||
882 | mgr_go[oc->channel] = true; | ||
883 | } | ||
884 | |||
885 | /* Commit manager settings */ | ||
886 | for (i = 0; i < num_mgrs; ++i) { | ||
887 | mc = &dss_cache.manager_cache[i]; | ||
888 | |||
889 | if (!mc->dirty) | ||
890 | continue; | ||
891 | |||
892 | if (mc->manual_update && !mc->do_manual_update) | ||
893 | continue; | ||
894 | |||
895 | if (mgr_busy[i]) { | ||
896 | busy = true; | ||
897 | continue; | ||
898 | } | ||
899 | |||
900 | configure_manager(i); | ||
901 | mc->dirty = false; | ||
902 | mc->shadow_dirty = true; | ||
903 | mgr_go[i] = true; | ||
904 | } | ||
905 | |||
906 | /* set GO */ | ||
907 | for (i = 0; i < num_mgrs; ++i) { | ||
908 | mc = &dss_cache.manager_cache[i]; | ||
909 | |||
910 | if (!mgr_go[i]) | ||
911 | continue; | ||
912 | |||
913 | /* We don't need GO with manual update display. LCD iface will | ||
914 | * always be turned off after frame, and new settings will be | ||
915 | * taken in to use at next update */ | ||
916 | if (!mc->manual_upd_display) | ||
917 | dispc_go(i); | ||
918 | } | ||
919 | |||
920 | if (busy) | ||
921 | r = 1; | ||
922 | else | ||
923 | r = 0; | ||
924 | |||
925 | return r; | ||
926 | } | ||
927 | |||
928 | /* Configure dispc for partial update. Return possibly modified update | ||
929 | * area */ | ||
930 | void dss_setup_partial_planes(struct omap_dss_device *dssdev, | ||
931 | u16 *xi, u16 *yi, u16 *wi, u16 *hi) | ||
932 | { | ||
933 | struct overlay_cache_data *oc; | ||
934 | struct manager_cache_data *mc; | ||
935 | const int num_ovls = ARRAY_SIZE(dss_cache.overlay_cache); | ||
936 | struct omap_overlay_manager *mgr; | ||
937 | int i; | ||
938 | u16 x, y, w, h; | ||
939 | unsigned long flags; | ||
940 | |||
941 | x = *xi; | ||
942 | y = *yi; | ||
943 | w = *wi; | ||
944 | h = *hi; | ||
945 | |||
946 | DSSDBG("dispc_setup_partial_planes %d,%d %dx%d\n", | ||
947 | *xi, *yi, *wi, *hi); | ||
948 | |||
949 | mgr = dssdev->manager; | ||
950 | |||
951 | if (!mgr) { | ||
952 | DSSDBG("no manager\n"); | ||
953 | return; | ||
954 | } | ||
955 | |||
956 | spin_lock_irqsave(&dss_cache.lock, flags); | ||
957 | |||
958 | /* We need to show the whole overlay if it is scaled. So look for | ||
959 | * those, and make the update area larger if found. | ||
960 | * Also mark the overlay cache dirty */ | ||
961 | for (i = 0; i < num_ovls; ++i) { | ||
962 | unsigned x1, y1, x2, y2; | ||
963 | unsigned outw, outh; | ||
964 | |||
965 | oc = &dss_cache.overlay_cache[i]; | ||
966 | |||
967 | if (oc->channel != mgr->id) | ||
968 | continue; | ||
969 | |||
970 | oc->dirty = true; | ||
971 | |||
972 | if (!oc->enabled) | ||
973 | continue; | ||
974 | |||
975 | if (!dispc_is_overlay_scaled(oc)) | ||
976 | continue; | ||
977 | |||
978 | outw = oc->out_width == 0 ? oc->width : oc->out_width; | ||
979 | outh = oc->out_height == 0 ? oc->height : oc->out_height; | ||
980 | |||
981 | /* is the overlay outside the update region? */ | ||
982 | if (!rectangle_intersects(x, y, w, h, | ||
983 | oc->pos_x, oc->pos_y, | ||
984 | outw, outh)) | ||
985 | continue; | ||
986 | |||
987 | /* if the overlay totally inside the update region? */ | ||
988 | if (rectangle_subset(oc->pos_x, oc->pos_y, outw, outh, | ||
989 | x, y, w, h)) | ||
990 | continue; | ||
991 | |||
992 | if (x > oc->pos_x) | ||
993 | x1 = oc->pos_x; | ||
994 | else | ||
995 | x1 = x; | ||
996 | |||
997 | if (y > oc->pos_y) | ||
998 | y1 = oc->pos_y; | ||
999 | else | ||
1000 | y1 = y; | ||
1001 | |||
1002 | if ((x + w) < (oc->pos_x + outw)) | ||
1003 | x2 = oc->pos_x + outw; | ||
1004 | else | ||
1005 | x2 = x + w; | ||
1006 | |||
1007 | if ((y + h) < (oc->pos_y + outh)) | ||
1008 | y2 = oc->pos_y + outh; | ||
1009 | else | ||
1010 | y2 = y + h; | ||
1011 | |||
1012 | x = x1; | ||
1013 | y = y1; | ||
1014 | w = x2 - x1; | ||
1015 | h = y2 - y1; | ||
1016 | |||
1017 | DSSDBG("changing upd area due to ovl(%d) scaling %d,%d %dx%d\n", | ||
1018 | i, x, y, w, h); | ||
1019 | } | ||
1020 | |||
1021 | mc = &dss_cache.manager_cache[mgr->id]; | ||
1022 | mc->do_manual_update = true; | ||
1023 | mc->x = x; | ||
1024 | mc->y = y; | ||
1025 | mc->w = w; | ||
1026 | mc->h = h; | ||
1027 | |||
1028 | configure_dispc(); | ||
1029 | |||
1030 | mc->do_manual_update = false; | ||
1031 | |||
1032 | spin_unlock_irqrestore(&dss_cache.lock, flags); | ||
1033 | |||
1034 | *xi = x; | ||
1035 | *yi = y; | ||
1036 | *wi = w; | ||
1037 | *hi = h; | ||
1038 | } | ||
1039 | |||
1040 | void dss_start_update(struct omap_dss_device *dssdev) | ||
1041 | { | ||
1042 | struct manager_cache_data *mc; | ||
1043 | struct overlay_cache_data *oc; | ||
1044 | const int num_ovls = ARRAY_SIZE(dss_cache.overlay_cache); | ||
1045 | const int num_mgrs = ARRAY_SIZE(dss_cache.manager_cache); | ||
1046 | struct omap_overlay_manager *mgr; | ||
1047 | int i; | ||
1048 | |||
1049 | mgr = dssdev->manager; | ||
1050 | |||
1051 | for (i = 0; i < num_ovls; ++i) { | ||
1052 | oc = &dss_cache.overlay_cache[i]; | ||
1053 | if (oc->channel != mgr->id) | ||
1054 | continue; | ||
1055 | |||
1056 | oc->shadow_dirty = false; | ||
1057 | } | ||
1058 | |||
1059 | for (i = 0; i < num_mgrs; ++i) { | ||
1060 | mc = &dss_cache.manager_cache[i]; | ||
1061 | if (mgr->id != i) | ||
1062 | continue; | ||
1063 | |||
1064 | mc->shadow_dirty = false; | ||
1065 | } | ||
1066 | |||
1067 | dispc_enable_lcd_out(1); | ||
1068 | } | ||
1069 | |||
1070 | static void dss_apply_irq_handler(void *data, u32 mask) | ||
1071 | { | ||
1072 | struct manager_cache_data *mc; | ||
1073 | struct overlay_cache_data *oc; | ||
1074 | const int num_ovls = ARRAY_SIZE(dss_cache.overlay_cache); | ||
1075 | const int num_mgrs = ARRAY_SIZE(dss_cache.manager_cache); | ||
1076 | int i, r; | ||
1077 | bool mgr_busy[2]; | ||
1078 | |||
1079 | mgr_busy[0] = dispc_go_busy(0); | ||
1080 | mgr_busy[1] = dispc_go_busy(1); | ||
1081 | |||
1082 | spin_lock(&dss_cache.lock); | ||
1083 | |||
1084 | for (i = 0; i < num_ovls; ++i) { | ||
1085 | oc = &dss_cache.overlay_cache[i]; | ||
1086 | if (!mgr_busy[oc->channel]) | ||
1087 | oc->shadow_dirty = false; | ||
1088 | } | ||
1089 | |||
1090 | for (i = 0; i < num_mgrs; ++i) { | ||
1091 | mc = &dss_cache.manager_cache[i]; | ||
1092 | if (!mgr_busy[i]) | ||
1093 | mc->shadow_dirty = false; | ||
1094 | } | ||
1095 | |||
1096 | r = configure_dispc(); | ||
1097 | if (r == 1) | ||
1098 | goto end; | ||
1099 | |||
1100 | /* re-read busy flags */ | ||
1101 | mgr_busy[0] = dispc_go_busy(0); | ||
1102 | mgr_busy[1] = dispc_go_busy(1); | ||
1103 | |||
1104 | /* keep running as long as there are busy managers, so that | ||
1105 | * we can collect overlay-applied information */ | ||
1106 | for (i = 0; i < num_mgrs; ++i) { | ||
1107 | if (mgr_busy[i]) | ||
1108 | goto end; | ||
1109 | } | ||
1110 | |||
1111 | omap_dispc_unregister_isr(dss_apply_irq_handler, NULL, | ||
1112 | DISPC_IRQ_VSYNC | DISPC_IRQ_EVSYNC_ODD | | ||
1113 | DISPC_IRQ_EVSYNC_EVEN); | ||
1114 | dss_cache.irq_enabled = false; | ||
1115 | |||
1116 | end: | ||
1117 | spin_unlock(&dss_cache.lock); | ||
1118 | } | ||
1119 | |||
1120 | static int omap_dss_mgr_apply(struct omap_overlay_manager *mgr) | ||
1121 | { | ||
1122 | struct overlay_cache_data *oc; | ||
1123 | struct manager_cache_data *mc; | ||
1124 | int i; | ||
1125 | struct omap_overlay *ovl; | ||
1126 | int num_planes_enabled = 0; | ||
1127 | bool use_fifomerge; | ||
1128 | unsigned long flags; | ||
1129 | int r; | ||
1130 | |||
1131 | DSSDBG("omap_dss_mgr_apply(%s)\n", mgr->name); | ||
1132 | |||
1133 | spin_lock_irqsave(&dss_cache.lock, flags); | ||
1134 | |||
1135 | /* Configure overlays */ | ||
1136 | for (i = 0; i < omap_dss_get_num_overlays(); ++i) { | ||
1137 | struct omap_dss_device *dssdev; | ||
1138 | |||
1139 | ovl = omap_dss_get_overlay(i); | ||
1140 | |||
1141 | if (!(ovl->caps & OMAP_DSS_OVL_CAP_DISPC)) | ||
1142 | continue; | ||
1143 | |||
1144 | oc = &dss_cache.overlay_cache[ovl->id]; | ||
1145 | |||
1146 | if (!overlay_enabled(ovl)) { | ||
1147 | if (oc->enabled) { | ||
1148 | oc->enabled = false; | ||
1149 | oc->dirty = true; | ||
1150 | } | ||
1151 | continue; | ||
1152 | } | ||
1153 | |||
1154 | if (!ovl->info_dirty) { | ||
1155 | if (oc->enabled) | ||
1156 | ++num_planes_enabled; | ||
1157 | continue; | ||
1158 | } | ||
1159 | |||
1160 | dssdev = ovl->manager->device; | ||
1161 | |||
1162 | if (dss_check_overlay(ovl, dssdev)) { | ||
1163 | if (oc->enabled) { | ||
1164 | oc->enabled = false; | ||
1165 | oc->dirty = true; | ||
1166 | } | ||
1167 | continue; | ||
1168 | } | ||
1169 | |||
1170 | ovl->info_dirty = false; | ||
1171 | oc->dirty = true; | ||
1172 | |||
1173 | oc->paddr = ovl->info.paddr; | ||
1174 | oc->vaddr = ovl->info.vaddr; | ||
1175 | oc->screen_width = ovl->info.screen_width; | ||
1176 | oc->width = ovl->info.width; | ||
1177 | oc->height = ovl->info.height; | ||
1178 | oc->color_mode = ovl->info.color_mode; | ||
1179 | oc->rotation = ovl->info.rotation; | ||
1180 | oc->rotation_type = ovl->info.rotation_type; | ||
1181 | oc->mirror = ovl->info.mirror; | ||
1182 | oc->pos_x = ovl->info.pos_x; | ||
1183 | oc->pos_y = ovl->info.pos_y; | ||
1184 | oc->out_width = ovl->info.out_width; | ||
1185 | oc->out_height = ovl->info.out_height; | ||
1186 | oc->global_alpha = ovl->info.global_alpha; | ||
1187 | |||
1188 | oc->replication = | ||
1189 | dss_use_replication(dssdev, ovl->info.color_mode); | ||
1190 | |||
1191 | oc->ilace = dssdev->type == OMAP_DISPLAY_TYPE_VENC; | ||
1192 | |||
1193 | oc->channel = ovl->manager->id; | ||
1194 | |||
1195 | oc->enabled = true; | ||
1196 | |||
1197 | oc->manual_update = | ||
1198 | dssdev->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE && | ||
1199 | dssdev->get_update_mode(dssdev) != OMAP_DSS_UPDATE_AUTO; | ||
1200 | |||
1201 | ++num_planes_enabled; | ||
1202 | } | ||
1203 | |||
1204 | /* Configure managers */ | ||
1205 | list_for_each_entry(mgr, &manager_list, list) { | ||
1206 | struct omap_dss_device *dssdev; | ||
1207 | |||
1208 | if (!(mgr->caps & OMAP_DSS_OVL_MGR_CAP_DISPC)) | ||
1209 | continue; | ||
1210 | |||
1211 | mc = &dss_cache.manager_cache[mgr->id]; | ||
1212 | |||
1213 | if (mgr->device_changed) { | ||
1214 | mgr->device_changed = false; | ||
1215 | mgr->info_dirty = true; | ||
1216 | } | ||
1217 | |||
1218 | if (!mgr->info_dirty) | ||
1219 | continue; | ||
1220 | |||
1221 | if (!mgr->device) | ||
1222 | continue; | ||
1223 | |||
1224 | dssdev = mgr->device; | ||
1225 | |||
1226 | mgr->info_dirty = false; | ||
1227 | mc->dirty = true; | ||
1228 | |||
1229 | mc->default_color = mgr->info.default_color; | ||
1230 | mc->trans_key_type = mgr->info.trans_key_type; | ||
1231 | mc->trans_key = mgr->info.trans_key; | ||
1232 | mc->trans_enabled = mgr->info.trans_enabled; | ||
1233 | mc->alpha_enabled = mgr->info.alpha_enabled; | ||
1234 | |||
1235 | mc->manual_upd_display = | ||
1236 | dssdev->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE; | ||
1237 | |||
1238 | mc->manual_update = | ||
1239 | dssdev->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE && | ||
1240 | dssdev->get_update_mode(dssdev) != OMAP_DSS_UPDATE_AUTO; | ||
1241 | } | ||
1242 | |||
1243 | /* XXX TODO: Try to get fifomerge working. The problem is that it | ||
1244 | * affects both managers, not individually but at the same time. This | ||
1245 | * means the change has to be well synchronized. I guess the proper way | ||
1246 | * is to have a two step process for fifo merge: | ||
1247 | * fifomerge enable: | ||
1248 | * 1. disable other planes, leaving one plane enabled | ||
1249 | * 2. wait until the planes are disabled on HW | ||
1250 | * 3. config merged fifo thresholds, enable fifomerge | ||
1251 | * fifomerge disable: | ||
1252 | * 1. config unmerged fifo thresholds, disable fifomerge | ||
1253 | * 2. wait until fifo changes are in HW | ||
1254 | * 3. enable planes | ||
1255 | */ | ||
1256 | use_fifomerge = false; | ||
1257 | |||
1258 | /* Configure overlay fifos */ | ||
1259 | for (i = 0; i < omap_dss_get_num_overlays(); ++i) { | ||
1260 | struct omap_dss_device *dssdev; | ||
1261 | u32 size; | ||
1262 | |||
1263 | ovl = omap_dss_get_overlay(i); | ||
1264 | |||
1265 | if (!(ovl->caps & OMAP_DSS_OVL_CAP_DISPC)) | ||
1266 | continue; | ||
1267 | |||
1268 | oc = &dss_cache.overlay_cache[ovl->id]; | ||
1269 | |||
1270 | if (!oc->enabled) | ||
1271 | continue; | ||
1272 | |||
1273 | dssdev = ovl->manager->device; | ||
1274 | |||
1275 | size = dispc_get_plane_fifo_size(ovl->id); | ||
1276 | if (use_fifomerge) | ||
1277 | size *= 3; | ||
1278 | |||
1279 | switch (dssdev->type) { | ||
1280 | case OMAP_DISPLAY_TYPE_DPI: | ||
1281 | case OMAP_DISPLAY_TYPE_DBI: | ||
1282 | case OMAP_DISPLAY_TYPE_SDI: | ||
1283 | case OMAP_DISPLAY_TYPE_VENC: | ||
1284 | default_get_overlay_fifo_thresholds(ovl->id, size, | ||
1285 | &oc->burst_size, &oc->fifo_low, | ||
1286 | &oc->fifo_high); | ||
1287 | break; | ||
1288 | #ifdef CONFIG_OMAP2_DSS_DSI | ||
1289 | case OMAP_DISPLAY_TYPE_DSI: | ||
1290 | dsi_get_overlay_fifo_thresholds(ovl->id, size, | ||
1291 | &oc->burst_size, &oc->fifo_low, | ||
1292 | &oc->fifo_high); | ||
1293 | break; | ||
1294 | #endif | ||
1295 | default: | ||
1296 | BUG(); | ||
1297 | } | ||
1298 | } | ||
1299 | |||
1300 | r = 0; | ||
1301 | dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); | ||
1302 | if (!dss_cache.irq_enabled) { | ||
1303 | r = omap_dispc_register_isr(dss_apply_irq_handler, NULL, | ||
1304 | DISPC_IRQ_VSYNC | DISPC_IRQ_EVSYNC_ODD | | ||
1305 | DISPC_IRQ_EVSYNC_EVEN); | ||
1306 | dss_cache.irq_enabled = true; | ||
1307 | } | ||
1308 | configure_dispc(); | ||
1309 | dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); | ||
1310 | |||
1311 | spin_unlock_irqrestore(&dss_cache.lock, flags); | ||
1312 | |||
1313 | return r; | ||
1314 | } | ||
1315 | |||
1316 | static int dss_check_manager(struct omap_overlay_manager *mgr) | ||
1317 | { | ||
1318 | /* OMAP supports only graphics source transparency color key and alpha | ||
1319 | * blending simultaneously. See TRM 15.4.2.4.2.2 Alpha Mode */ | ||
1320 | |||
1321 | if (mgr->info.alpha_enabled && mgr->info.trans_enabled && | ||
1322 | mgr->info.trans_key_type != OMAP_DSS_COLOR_KEY_GFX_DST) | ||
1323 | return -EINVAL; | ||
1324 | |||
1325 | return 0; | ||
1326 | } | ||
1327 | |||
1328 | static int omap_dss_mgr_set_info(struct omap_overlay_manager *mgr, | ||
1329 | struct omap_overlay_manager_info *info) | ||
1330 | { | ||
1331 | int r; | ||
1332 | struct omap_overlay_manager_info old_info; | ||
1333 | |||
1334 | old_info = mgr->info; | ||
1335 | mgr->info = *info; | ||
1336 | |||
1337 | r = dss_check_manager(mgr); | ||
1338 | if (r) { | ||
1339 | mgr->info = old_info; | ||
1340 | return r; | ||
1341 | } | ||
1342 | |||
1343 | mgr->info_dirty = true; | ||
1344 | |||
1345 | return 0; | ||
1346 | } | ||
1347 | |||
1348 | static void omap_dss_mgr_get_info(struct omap_overlay_manager *mgr, | ||
1349 | struct omap_overlay_manager_info *info) | ||
1350 | { | ||
1351 | *info = mgr->info; | ||
1352 | } | ||
1353 | |||
1354 | static void omap_dss_add_overlay_manager(struct omap_overlay_manager *manager) | ||
1355 | { | ||
1356 | ++num_managers; | ||
1357 | list_add_tail(&manager->list, &manager_list); | ||
1358 | } | ||
1359 | |||
1360 | int dss_init_overlay_managers(struct platform_device *pdev) | ||
1361 | { | ||
1362 | int i, r; | ||
1363 | |||
1364 | spin_lock_init(&dss_cache.lock); | ||
1365 | |||
1366 | INIT_LIST_HEAD(&manager_list); | ||
1367 | |||
1368 | num_managers = 0; | ||
1369 | |||
1370 | for (i = 0; i < 2; ++i) { | ||
1371 | struct omap_overlay_manager *mgr; | ||
1372 | mgr = kzalloc(sizeof(*mgr), GFP_KERNEL); | ||
1373 | |||
1374 | BUG_ON(mgr == NULL); | ||
1375 | |||
1376 | switch (i) { | ||
1377 | case 0: | ||
1378 | mgr->name = "lcd"; | ||
1379 | mgr->id = OMAP_DSS_CHANNEL_LCD; | ||
1380 | mgr->supported_displays = | ||
1381 | OMAP_DISPLAY_TYPE_DPI | OMAP_DISPLAY_TYPE_DBI | | ||
1382 | OMAP_DISPLAY_TYPE_SDI | OMAP_DISPLAY_TYPE_DSI; | ||
1383 | break; | ||
1384 | case 1: | ||
1385 | mgr->name = "tv"; | ||
1386 | mgr->id = OMAP_DSS_CHANNEL_DIGIT; | ||
1387 | mgr->supported_displays = OMAP_DISPLAY_TYPE_VENC; | ||
1388 | break; | ||
1389 | } | ||
1390 | |||
1391 | mgr->set_device = &omap_dss_set_device; | ||
1392 | mgr->unset_device = &omap_dss_unset_device; | ||
1393 | mgr->apply = &omap_dss_mgr_apply; | ||
1394 | mgr->set_manager_info = &omap_dss_mgr_set_info; | ||
1395 | mgr->get_manager_info = &omap_dss_mgr_get_info; | ||
1396 | mgr->wait_for_go = &dss_mgr_wait_for_go; | ||
1397 | |||
1398 | mgr->caps = OMAP_DSS_OVL_MGR_CAP_DISPC; | ||
1399 | |||
1400 | dss_overlay_setup_dispc_manager(mgr); | ||
1401 | |||
1402 | omap_dss_add_overlay_manager(mgr); | ||
1403 | |||
1404 | r = kobject_init_and_add(&mgr->kobj, &manager_ktype, | ||
1405 | &pdev->dev.kobj, "manager%d", i); | ||
1406 | |||
1407 | if (r) { | ||
1408 | DSSERR("failed to create sysfs file\n"); | ||
1409 | continue; | ||
1410 | } | ||
1411 | } | ||
1412 | |||
1413 | #ifdef L4_EXAMPLE | ||
1414 | { | ||
1415 | int omap_dss_mgr_apply_l4(struct omap_overlay_manager *mgr) | ||
1416 | { | ||
1417 | DSSDBG("omap_dss_mgr_apply_l4(%s)\n", mgr->name); | ||
1418 | |||
1419 | return 0; | ||
1420 | } | ||
1421 | |||
1422 | struct omap_overlay_manager *mgr; | ||
1423 | mgr = kzalloc(sizeof(*mgr), GFP_KERNEL); | ||
1424 | |||
1425 | BUG_ON(mgr == NULL); | ||
1426 | |||
1427 | mgr->name = "l4"; | ||
1428 | mgr->supported_displays = | ||
1429 | OMAP_DISPLAY_TYPE_DBI | OMAP_DISPLAY_TYPE_DSI; | ||
1430 | |||
1431 | mgr->set_device = &omap_dss_set_device; | ||
1432 | mgr->unset_device = &omap_dss_unset_device; | ||
1433 | mgr->apply = &omap_dss_mgr_apply_l4; | ||
1434 | mgr->set_manager_info = &omap_dss_mgr_set_info; | ||
1435 | mgr->get_manager_info = &omap_dss_mgr_get_info; | ||
1436 | |||
1437 | dss_overlay_setup_l4_manager(mgr); | ||
1438 | |||
1439 | omap_dss_add_overlay_manager(mgr); | ||
1440 | |||
1441 | r = kobject_init_and_add(&mgr->kobj, &manager_ktype, | ||
1442 | &pdev->dev.kobj, "managerl4"); | ||
1443 | |||
1444 | if (r) | ||
1445 | DSSERR("failed to create sysfs file\n"); | ||
1446 | } | ||
1447 | #endif | ||
1448 | |||
1449 | return 0; | ||
1450 | } | ||
1451 | |||
1452 | void dss_uninit_overlay_managers(struct platform_device *pdev) | ||
1453 | { | ||
1454 | struct omap_overlay_manager *mgr; | ||
1455 | |||
1456 | while (!list_empty(&manager_list)) { | ||
1457 | mgr = list_first_entry(&manager_list, | ||
1458 | struct omap_overlay_manager, list); | ||
1459 | list_del(&mgr->list); | ||
1460 | kobject_del(&mgr->kobj); | ||
1461 | kobject_put(&mgr->kobj); | ||
1462 | kfree(mgr); | ||
1463 | } | ||
1464 | |||
1465 | num_managers = 0; | ||
1466 | } | ||
1467 | |||
1468 | int omap_dss_get_num_overlay_managers(void) | ||
1469 | { | ||
1470 | return num_managers; | ||
1471 | } | ||
1472 | EXPORT_SYMBOL(omap_dss_get_num_overlay_managers); | ||
1473 | |||
1474 | struct omap_overlay_manager *omap_dss_get_overlay_manager(int num) | ||
1475 | { | ||
1476 | int i = 0; | ||
1477 | struct omap_overlay_manager *mgr; | ||
1478 | |||
1479 | list_for_each_entry(mgr, &manager_list, list) { | ||
1480 | if (i++ == num) | ||
1481 | return mgr; | ||
1482 | } | ||
1483 | |||
1484 | return NULL; | ||
1485 | } | ||
1486 | EXPORT_SYMBOL(omap_dss_get_overlay_manager); | ||
1487 | |||
diff --git a/drivers/video/omap2/dss/overlay.c b/drivers/video/omap2/dss/overlay.c new file mode 100644 index 000000000000..b7f9a7339842 --- /dev/null +++ b/drivers/video/omap2/dss/overlay.c | |||
@@ -0,0 +1,680 @@ | |||
1 | /* | ||
2 | * linux/drivers/video/omap2/dss/overlay.c | ||
3 | * | ||
4 | * Copyright (C) 2009 Nokia Corporation | ||
5 | * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> | ||
6 | * | ||
7 | * Some code and ideas taken from drivers/video/omap/ driver | ||
8 | * by Imre Deak. | ||
9 | * | ||
10 | * This program is free software; you can redistribute it and/or modify it | ||
11 | * under the terms of the GNU General Public License version 2 as published by | ||
12 | * the Free Software Foundation. | ||
13 | * | ||
14 | * This program is distributed in the hope that it will be useful, but WITHOUT | ||
15 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | ||
16 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for | ||
17 | * more details. | ||
18 | * | ||
19 | * You should have received a copy of the GNU General Public License along with | ||
20 | * this program. If not, see <http://www.gnu.org/licenses/>. | ||
21 | */ | ||
22 | |||
23 | #define DSS_SUBSYS_NAME "OVERLAY" | ||
24 | |||
25 | #include <linux/kernel.h> | ||
26 | #include <linux/module.h> | ||
27 | #include <linux/err.h> | ||
28 | #include <linux/sysfs.h> | ||
29 | #include <linux/kobject.h> | ||
30 | #include <linux/platform_device.h> | ||
31 | #include <linux/delay.h> | ||
32 | |||
33 | #include <plat/display.h> | ||
34 | #include <plat/cpu.h> | ||
35 | |||
36 | #include "dss.h" | ||
37 | |||
38 | static int num_overlays; | ||
39 | static struct list_head overlay_list; | ||
40 | |||
41 | static ssize_t overlay_name_show(struct omap_overlay *ovl, char *buf) | ||
42 | { | ||
43 | return snprintf(buf, PAGE_SIZE, "%s\n", ovl->name); | ||
44 | } | ||
45 | |||
46 | static ssize_t overlay_manager_show(struct omap_overlay *ovl, char *buf) | ||
47 | { | ||
48 | return snprintf(buf, PAGE_SIZE, "%s\n", | ||
49 | ovl->manager ? ovl->manager->name : "<none>"); | ||
50 | } | ||
51 | |||
52 | static ssize_t overlay_manager_store(struct omap_overlay *ovl, const char *buf, | ||
53 | size_t size) | ||
54 | { | ||
55 | int i, r; | ||
56 | struct omap_overlay_manager *mgr = NULL; | ||
57 | struct omap_overlay_manager *old_mgr; | ||
58 | int len = size; | ||
59 | |||
60 | if (buf[size-1] == '\n') | ||
61 | --len; | ||
62 | |||
63 | if (len > 0) { | ||
64 | for (i = 0; i < omap_dss_get_num_overlay_managers(); ++i) { | ||
65 | mgr = omap_dss_get_overlay_manager(i); | ||
66 | |||
67 | if (strncmp(buf, mgr->name, len) == 0) | ||
68 | break; | ||
69 | |||
70 | mgr = NULL; | ||
71 | } | ||
72 | } | ||
73 | |||
74 | if (len > 0 && mgr == NULL) | ||
75 | return -EINVAL; | ||
76 | |||
77 | if (mgr) | ||
78 | DSSDBG("manager %s found\n", mgr->name); | ||
79 | |||
80 | if (mgr == ovl->manager) | ||
81 | return size; | ||
82 | |||
83 | old_mgr = ovl->manager; | ||
84 | |||
85 | /* detach old manager */ | ||
86 | if (old_mgr) { | ||
87 | r = ovl->unset_manager(ovl); | ||
88 | if (r) { | ||
89 | DSSERR("detach failed\n"); | ||
90 | return r; | ||
91 | } | ||
92 | |||
93 | r = old_mgr->apply(old_mgr); | ||
94 | if (r) | ||
95 | return r; | ||
96 | } | ||
97 | |||
98 | if (mgr) { | ||
99 | r = ovl->set_manager(ovl, mgr); | ||
100 | if (r) { | ||
101 | DSSERR("Failed to attach overlay\n"); | ||
102 | return r; | ||
103 | } | ||
104 | |||
105 | r = mgr->apply(mgr); | ||
106 | if (r) | ||
107 | return r; | ||
108 | } | ||
109 | |||
110 | return size; | ||
111 | } | ||
112 | |||
113 | static ssize_t overlay_input_size_show(struct omap_overlay *ovl, char *buf) | ||
114 | { | ||
115 | return snprintf(buf, PAGE_SIZE, "%d,%d\n", | ||
116 | ovl->info.width, ovl->info.height); | ||
117 | } | ||
118 | |||
119 | static ssize_t overlay_screen_width_show(struct omap_overlay *ovl, char *buf) | ||
120 | { | ||
121 | return snprintf(buf, PAGE_SIZE, "%d\n", ovl->info.screen_width); | ||
122 | } | ||
123 | |||
124 | static ssize_t overlay_position_show(struct omap_overlay *ovl, char *buf) | ||
125 | { | ||
126 | return snprintf(buf, PAGE_SIZE, "%d,%d\n", | ||
127 | ovl->info.pos_x, ovl->info.pos_y); | ||
128 | } | ||
129 | |||
130 | static ssize_t overlay_position_store(struct omap_overlay *ovl, | ||
131 | const char *buf, size_t size) | ||
132 | { | ||
133 | int r; | ||
134 | char *last; | ||
135 | struct omap_overlay_info info; | ||
136 | |||
137 | ovl->get_overlay_info(ovl, &info); | ||
138 | |||
139 | info.pos_x = simple_strtoul(buf, &last, 10); | ||
140 | ++last; | ||
141 | if (last - buf >= size) | ||
142 | return -EINVAL; | ||
143 | |||
144 | info.pos_y = simple_strtoul(last, &last, 10); | ||
145 | |||
146 | r = ovl->set_overlay_info(ovl, &info); | ||
147 | if (r) | ||
148 | return r; | ||
149 | |||
150 | if (ovl->manager) { | ||
151 | r = ovl->manager->apply(ovl->manager); | ||
152 | if (r) | ||
153 | return r; | ||
154 | } | ||
155 | |||
156 | return size; | ||
157 | } | ||
158 | |||
159 | static ssize_t overlay_output_size_show(struct omap_overlay *ovl, char *buf) | ||
160 | { | ||
161 | return snprintf(buf, PAGE_SIZE, "%d,%d\n", | ||
162 | ovl->info.out_width, ovl->info.out_height); | ||
163 | } | ||
164 | |||
165 | static ssize_t overlay_output_size_store(struct omap_overlay *ovl, | ||
166 | const char *buf, size_t size) | ||
167 | { | ||
168 | int r; | ||
169 | char *last; | ||
170 | struct omap_overlay_info info; | ||
171 | |||
172 | ovl->get_overlay_info(ovl, &info); | ||
173 | |||
174 | info.out_width = simple_strtoul(buf, &last, 10); | ||
175 | ++last; | ||
176 | if (last - buf >= size) | ||
177 | return -EINVAL; | ||
178 | |||
179 | info.out_height = simple_strtoul(last, &last, 10); | ||
180 | |||
181 | r = ovl->set_overlay_info(ovl, &info); | ||
182 | if (r) | ||
183 | return r; | ||
184 | |||
185 | if (ovl->manager) { | ||
186 | r = ovl->manager->apply(ovl->manager); | ||
187 | if (r) | ||
188 | return r; | ||
189 | } | ||
190 | |||
191 | return size; | ||
192 | } | ||
193 | |||
194 | static ssize_t overlay_enabled_show(struct omap_overlay *ovl, char *buf) | ||
195 | { | ||
196 | return snprintf(buf, PAGE_SIZE, "%d\n", ovl->info.enabled); | ||
197 | } | ||
198 | |||
199 | static ssize_t overlay_enabled_store(struct omap_overlay *ovl, const char *buf, | ||
200 | size_t size) | ||
201 | { | ||
202 | int r; | ||
203 | struct omap_overlay_info info; | ||
204 | |||
205 | ovl->get_overlay_info(ovl, &info); | ||
206 | |||
207 | info.enabled = simple_strtoul(buf, NULL, 10); | ||
208 | |||
209 | r = ovl->set_overlay_info(ovl, &info); | ||
210 | if (r) | ||
211 | return r; | ||
212 | |||
213 | if (ovl->manager) { | ||
214 | r = ovl->manager->apply(ovl->manager); | ||
215 | if (r) | ||
216 | return r; | ||
217 | } | ||
218 | |||
219 | return size; | ||
220 | } | ||
221 | |||
222 | static ssize_t overlay_global_alpha_show(struct omap_overlay *ovl, char *buf) | ||
223 | { | ||
224 | return snprintf(buf, PAGE_SIZE, "%d\n", | ||
225 | ovl->info.global_alpha); | ||
226 | } | ||
227 | |||
228 | static ssize_t overlay_global_alpha_store(struct omap_overlay *ovl, | ||
229 | const char *buf, size_t size) | ||
230 | { | ||
231 | int r; | ||
232 | struct omap_overlay_info info; | ||
233 | |||
234 | ovl->get_overlay_info(ovl, &info); | ||
235 | |||
236 | /* Video1 plane does not support global alpha | ||
237 | * to always make it 255 completely opaque | ||
238 | */ | ||
239 | if (ovl->id == OMAP_DSS_VIDEO1) | ||
240 | info.global_alpha = 255; | ||
241 | else | ||
242 | info.global_alpha = simple_strtoul(buf, NULL, 10); | ||
243 | |||
244 | r = ovl->set_overlay_info(ovl, &info); | ||
245 | if (r) | ||
246 | return r; | ||
247 | |||
248 | if (ovl->manager) { | ||
249 | r = ovl->manager->apply(ovl->manager); | ||
250 | if (r) | ||
251 | return r; | ||
252 | } | ||
253 | |||
254 | return size; | ||
255 | } | ||
256 | |||
257 | struct overlay_attribute { | ||
258 | struct attribute attr; | ||
259 | ssize_t (*show)(struct omap_overlay *, char *); | ||
260 | ssize_t (*store)(struct omap_overlay *, const char *, size_t); | ||
261 | }; | ||
262 | |||
263 | #define OVERLAY_ATTR(_name, _mode, _show, _store) \ | ||
264 | struct overlay_attribute overlay_attr_##_name = \ | ||
265 | __ATTR(_name, _mode, _show, _store) | ||
266 | |||
267 | static OVERLAY_ATTR(name, S_IRUGO, overlay_name_show, NULL); | ||
268 | static OVERLAY_ATTR(manager, S_IRUGO|S_IWUSR, | ||
269 | overlay_manager_show, overlay_manager_store); | ||
270 | static OVERLAY_ATTR(input_size, S_IRUGO, overlay_input_size_show, NULL); | ||
271 | static OVERLAY_ATTR(screen_width, S_IRUGO, overlay_screen_width_show, NULL); | ||
272 | static OVERLAY_ATTR(position, S_IRUGO|S_IWUSR, | ||
273 | overlay_position_show, overlay_position_store); | ||
274 | static OVERLAY_ATTR(output_size, S_IRUGO|S_IWUSR, | ||
275 | overlay_output_size_show, overlay_output_size_store); | ||
276 | static OVERLAY_ATTR(enabled, S_IRUGO|S_IWUSR, | ||
277 | overlay_enabled_show, overlay_enabled_store); | ||
278 | static OVERLAY_ATTR(global_alpha, S_IRUGO|S_IWUSR, | ||
279 | overlay_global_alpha_show, overlay_global_alpha_store); | ||
280 | |||
281 | static struct attribute *overlay_sysfs_attrs[] = { | ||
282 | &overlay_attr_name.attr, | ||
283 | &overlay_attr_manager.attr, | ||
284 | &overlay_attr_input_size.attr, | ||
285 | &overlay_attr_screen_width.attr, | ||
286 | &overlay_attr_position.attr, | ||
287 | &overlay_attr_output_size.attr, | ||
288 | &overlay_attr_enabled.attr, | ||
289 | &overlay_attr_global_alpha.attr, | ||
290 | NULL | ||
291 | }; | ||
292 | |||
293 | static ssize_t overlay_attr_show(struct kobject *kobj, struct attribute *attr, | ||
294 | char *buf) | ||
295 | { | ||
296 | struct omap_overlay *overlay; | ||
297 | struct overlay_attribute *overlay_attr; | ||
298 | |||
299 | overlay = container_of(kobj, struct omap_overlay, kobj); | ||
300 | overlay_attr = container_of(attr, struct overlay_attribute, attr); | ||
301 | |||
302 | if (!overlay_attr->show) | ||
303 | return -ENOENT; | ||
304 | |||
305 | return overlay_attr->show(overlay, buf); | ||
306 | } | ||
307 | |||
308 | static ssize_t overlay_attr_store(struct kobject *kobj, struct attribute *attr, | ||
309 | const char *buf, size_t size) | ||
310 | { | ||
311 | struct omap_overlay *overlay; | ||
312 | struct overlay_attribute *overlay_attr; | ||
313 | |||
314 | overlay = container_of(kobj, struct omap_overlay, kobj); | ||
315 | overlay_attr = container_of(attr, struct overlay_attribute, attr); | ||
316 | |||
317 | if (!overlay_attr->store) | ||
318 | return -ENOENT; | ||
319 | |||
320 | return overlay_attr->store(overlay, buf, size); | ||
321 | } | ||
322 | |||
323 | static struct sysfs_ops overlay_sysfs_ops = { | ||
324 | .show = overlay_attr_show, | ||
325 | .store = overlay_attr_store, | ||
326 | }; | ||
327 | |||
328 | static struct kobj_type overlay_ktype = { | ||
329 | .sysfs_ops = &overlay_sysfs_ops, | ||
330 | .default_attrs = overlay_sysfs_attrs, | ||
331 | }; | ||
332 | |||
333 | /* Check if overlay parameters are compatible with display */ | ||
334 | int dss_check_overlay(struct omap_overlay *ovl, struct omap_dss_device *dssdev) | ||
335 | { | ||
336 | struct omap_overlay_info *info; | ||
337 | u16 outw, outh; | ||
338 | u16 dw, dh; | ||
339 | |||
340 | if (!dssdev) | ||
341 | return 0; | ||
342 | |||
343 | if (!ovl->info.enabled) | ||
344 | return 0; | ||
345 | |||
346 | info = &ovl->info; | ||
347 | |||
348 | if (info->paddr == 0) { | ||
349 | DSSDBG("check_overlay failed: paddr 0\n"); | ||
350 | return -EINVAL; | ||
351 | } | ||
352 | |||
353 | dssdev->get_resolution(dssdev, &dw, &dh); | ||
354 | |||
355 | DSSDBG("check_overlay %d: (%d,%d %dx%d -> %dx%d) disp (%dx%d)\n", | ||
356 | ovl->id, | ||
357 | info->pos_x, info->pos_y, | ||
358 | info->width, info->height, | ||
359 | info->out_width, info->out_height, | ||
360 | dw, dh); | ||
361 | |||
362 | if ((ovl->caps & OMAP_DSS_OVL_CAP_SCALE) == 0) { | ||
363 | outw = info->width; | ||
364 | outh = info->height; | ||
365 | } else { | ||
366 | if (info->out_width == 0) | ||
367 | outw = info->width; | ||
368 | else | ||
369 | outw = info->out_width; | ||
370 | |||
371 | if (info->out_height == 0) | ||
372 | outh = info->height; | ||
373 | else | ||
374 | outh = info->out_height; | ||
375 | } | ||
376 | |||
377 | if (dw < info->pos_x + outw) { | ||
378 | DSSDBG("check_overlay failed 1: %d < %d + %d\n", | ||
379 | dw, info->pos_x, outw); | ||
380 | return -EINVAL; | ||
381 | } | ||
382 | |||
383 | if (dh < info->pos_y + outh) { | ||
384 | DSSDBG("check_overlay failed 2: %d < %d + %d\n", | ||
385 | dh, info->pos_y, outh); | ||
386 | return -EINVAL; | ||
387 | } | ||
388 | |||
389 | if ((ovl->supported_modes & info->color_mode) == 0) { | ||
390 | DSSERR("overlay doesn't support mode %d\n", info->color_mode); | ||
391 | return -EINVAL; | ||
392 | } | ||
393 | |||
394 | return 0; | ||
395 | } | ||
396 | |||
397 | static int dss_ovl_set_overlay_info(struct omap_overlay *ovl, | ||
398 | struct omap_overlay_info *info) | ||
399 | { | ||
400 | int r; | ||
401 | struct omap_overlay_info old_info; | ||
402 | |||
403 | old_info = ovl->info; | ||
404 | ovl->info = *info; | ||
405 | |||
406 | if (ovl->manager) { | ||
407 | r = dss_check_overlay(ovl, ovl->manager->device); | ||
408 | if (r) { | ||
409 | ovl->info = old_info; | ||
410 | return r; | ||
411 | } | ||
412 | } | ||
413 | |||
414 | ovl->info_dirty = true; | ||
415 | |||
416 | return 0; | ||
417 | } | ||
418 | |||
419 | static void dss_ovl_get_overlay_info(struct omap_overlay *ovl, | ||
420 | struct omap_overlay_info *info) | ||
421 | { | ||
422 | *info = ovl->info; | ||
423 | } | ||
424 | |||
425 | static int dss_ovl_wait_for_go(struct omap_overlay *ovl) | ||
426 | { | ||
427 | return dss_mgr_wait_for_go_ovl(ovl); | ||
428 | } | ||
429 | |||
430 | static int omap_dss_set_manager(struct omap_overlay *ovl, | ||
431 | struct omap_overlay_manager *mgr) | ||
432 | { | ||
433 | if (!mgr) | ||
434 | return -EINVAL; | ||
435 | |||
436 | if (ovl->manager) { | ||
437 | DSSERR("overlay '%s' already has a manager '%s'\n", | ||
438 | ovl->name, ovl->manager->name); | ||
439 | return -EINVAL; | ||
440 | } | ||
441 | |||
442 | if (ovl->info.enabled) { | ||
443 | DSSERR("overlay has to be disabled to change the manager\n"); | ||
444 | return -EINVAL; | ||
445 | } | ||
446 | |||
447 | ovl->manager = mgr; | ||
448 | |||
449 | dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); | ||
450 | /* XXX: on manual update display, in auto update mode, a bug happens | ||
451 | * here. When an overlay is first enabled on LCD, then it's disabled, | ||
452 | * and the manager is changed to TV, we sometimes get SYNC_LOST_DIGIT | ||
453 | * errors. Waiting before changing the channel_out fixes it. I'm | ||
454 | * guessing that the overlay is still somehow being used for the LCD, | ||
455 | * but I don't understand how or why. */ | ||
456 | msleep(40); | ||
457 | dispc_set_channel_out(ovl->id, mgr->id); | ||
458 | dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); | ||
459 | |||
460 | return 0; | ||
461 | } | ||
462 | |||
463 | static int omap_dss_unset_manager(struct omap_overlay *ovl) | ||
464 | { | ||
465 | int r; | ||
466 | |||
467 | if (!ovl->manager) { | ||
468 | DSSERR("failed to detach overlay: manager not set\n"); | ||
469 | return -EINVAL; | ||
470 | } | ||
471 | |||
472 | if (ovl->info.enabled) { | ||
473 | DSSERR("overlay has to be disabled to unset the manager\n"); | ||
474 | return -EINVAL; | ||
475 | } | ||
476 | |||
477 | r = ovl->wait_for_go(ovl); | ||
478 | if (r) | ||
479 | return r; | ||
480 | |||
481 | ovl->manager = NULL; | ||
482 | |||
483 | return 0; | ||
484 | } | ||
485 | |||
486 | int omap_dss_get_num_overlays(void) | ||
487 | { | ||
488 | return num_overlays; | ||
489 | } | ||
490 | EXPORT_SYMBOL(omap_dss_get_num_overlays); | ||
491 | |||
492 | struct omap_overlay *omap_dss_get_overlay(int num) | ||
493 | { | ||
494 | int i = 0; | ||
495 | struct omap_overlay *ovl; | ||
496 | |||
497 | list_for_each_entry(ovl, &overlay_list, list) { | ||
498 | if (i++ == num) | ||
499 | return ovl; | ||
500 | } | ||
501 | |||
502 | return NULL; | ||
503 | } | ||
504 | EXPORT_SYMBOL(omap_dss_get_overlay); | ||
505 | |||
506 | static void omap_dss_add_overlay(struct omap_overlay *overlay) | ||
507 | { | ||
508 | ++num_overlays; | ||
509 | list_add_tail(&overlay->list, &overlay_list); | ||
510 | } | ||
511 | |||
512 | static struct omap_overlay *dispc_overlays[3]; | ||
513 | |||
514 | void dss_overlay_setup_dispc_manager(struct omap_overlay_manager *mgr) | ||
515 | { | ||
516 | mgr->num_overlays = 3; | ||
517 | mgr->overlays = dispc_overlays; | ||
518 | } | ||
519 | |||
520 | #ifdef L4_EXAMPLE | ||
521 | static struct omap_overlay *l4_overlays[1]; | ||
522 | void dss_overlay_setup_l4_manager(struct omap_overlay_manager *mgr) | ||
523 | { | ||
524 | mgr->num_overlays = 1; | ||
525 | mgr->overlays = l4_overlays; | ||
526 | } | ||
527 | #endif | ||
528 | |||
529 | void dss_init_overlays(struct platform_device *pdev) | ||
530 | { | ||
531 | int i, r; | ||
532 | |||
533 | INIT_LIST_HEAD(&overlay_list); | ||
534 | |||
535 | num_overlays = 0; | ||
536 | |||
537 | for (i = 0; i < 3; ++i) { | ||
538 | struct omap_overlay *ovl; | ||
539 | ovl = kzalloc(sizeof(*ovl), GFP_KERNEL); | ||
540 | |||
541 | BUG_ON(ovl == NULL); | ||
542 | |||
543 | switch (i) { | ||
544 | case 0: | ||
545 | ovl->name = "gfx"; | ||
546 | ovl->id = OMAP_DSS_GFX; | ||
547 | ovl->supported_modes = cpu_is_omap34xx() ? | ||
548 | OMAP_DSS_COLOR_GFX_OMAP3 : | ||
549 | OMAP_DSS_COLOR_GFX_OMAP2; | ||
550 | ovl->caps = OMAP_DSS_OVL_CAP_DISPC; | ||
551 | ovl->info.global_alpha = 255; | ||
552 | break; | ||
553 | case 1: | ||
554 | ovl->name = "vid1"; | ||
555 | ovl->id = OMAP_DSS_VIDEO1; | ||
556 | ovl->supported_modes = cpu_is_omap34xx() ? | ||
557 | OMAP_DSS_COLOR_VID1_OMAP3 : | ||
558 | OMAP_DSS_COLOR_VID_OMAP2; | ||
559 | ovl->caps = OMAP_DSS_OVL_CAP_SCALE | | ||
560 | OMAP_DSS_OVL_CAP_DISPC; | ||
561 | ovl->info.global_alpha = 255; | ||
562 | break; | ||
563 | case 2: | ||
564 | ovl->name = "vid2"; | ||
565 | ovl->id = OMAP_DSS_VIDEO2; | ||
566 | ovl->supported_modes = cpu_is_omap34xx() ? | ||
567 | OMAP_DSS_COLOR_VID2_OMAP3 : | ||
568 | OMAP_DSS_COLOR_VID_OMAP2; | ||
569 | ovl->caps = OMAP_DSS_OVL_CAP_SCALE | | ||
570 | OMAP_DSS_OVL_CAP_DISPC; | ||
571 | ovl->info.global_alpha = 255; | ||
572 | break; | ||
573 | } | ||
574 | |||
575 | ovl->set_manager = &omap_dss_set_manager; | ||
576 | ovl->unset_manager = &omap_dss_unset_manager; | ||
577 | ovl->set_overlay_info = &dss_ovl_set_overlay_info; | ||
578 | ovl->get_overlay_info = &dss_ovl_get_overlay_info; | ||
579 | ovl->wait_for_go = &dss_ovl_wait_for_go; | ||
580 | |||
581 | omap_dss_add_overlay(ovl); | ||
582 | |||
583 | r = kobject_init_and_add(&ovl->kobj, &overlay_ktype, | ||
584 | &pdev->dev.kobj, "overlay%d", i); | ||
585 | |||
586 | if (r) { | ||
587 | DSSERR("failed to create sysfs file\n"); | ||
588 | continue; | ||
589 | } | ||
590 | |||
591 | dispc_overlays[i] = ovl; | ||
592 | } | ||
593 | |||
594 | #ifdef L4_EXAMPLE | ||
595 | { | ||
596 | struct omap_overlay *ovl; | ||
597 | ovl = kzalloc(sizeof(*ovl), GFP_KERNEL); | ||
598 | |||
599 | BUG_ON(ovl == NULL); | ||
600 | |||
601 | ovl->name = "l4"; | ||
602 | ovl->supported_modes = OMAP_DSS_COLOR_RGB24U; | ||
603 | |||
604 | ovl->set_manager = &omap_dss_set_manager; | ||
605 | ovl->unset_manager = &omap_dss_unset_manager; | ||
606 | ovl->set_overlay_info = &dss_ovl_set_overlay_info; | ||
607 | ovl->get_overlay_info = &dss_ovl_get_overlay_info; | ||
608 | |||
609 | omap_dss_add_overlay(ovl); | ||
610 | |||
611 | r = kobject_init_and_add(&ovl->kobj, &overlay_ktype, | ||
612 | &pdev->dev.kobj, "overlayl4"); | ||
613 | |||
614 | if (r) | ||
615 | DSSERR("failed to create sysfs file\n"); | ||
616 | |||
617 | l4_overlays[0] = ovl; | ||
618 | } | ||
619 | #endif | ||
620 | } | ||
621 | |||
622 | /* connect overlays to the new device, if not already connected. if force | ||
623 | * selected, connect always. */ | ||
624 | void dss_recheck_connections(struct omap_dss_device *dssdev, bool force) | ||
625 | { | ||
626 | int i; | ||
627 | struct omap_overlay_manager *lcd_mgr; | ||
628 | struct omap_overlay_manager *tv_mgr; | ||
629 | struct omap_overlay_manager *mgr = NULL; | ||
630 | |||
631 | lcd_mgr = omap_dss_get_overlay_manager(OMAP_DSS_OVL_MGR_LCD); | ||
632 | tv_mgr = omap_dss_get_overlay_manager(OMAP_DSS_OVL_MGR_TV); | ||
633 | |||
634 | if (dssdev->type != OMAP_DISPLAY_TYPE_VENC) { | ||
635 | if (!lcd_mgr->device || force) { | ||
636 | if (lcd_mgr->device) | ||
637 | lcd_mgr->unset_device(lcd_mgr); | ||
638 | lcd_mgr->set_device(lcd_mgr, dssdev); | ||
639 | mgr = lcd_mgr; | ||
640 | } | ||
641 | } | ||
642 | |||
643 | if (dssdev->type == OMAP_DISPLAY_TYPE_VENC) { | ||
644 | if (!tv_mgr->device || force) { | ||
645 | if (tv_mgr->device) | ||
646 | tv_mgr->unset_device(tv_mgr); | ||
647 | tv_mgr->set_device(tv_mgr, dssdev); | ||
648 | mgr = tv_mgr; | ||
649 | } | ||
650 | } | ||
651 | |||
652 | if (mgr) { | ||
653 | for (i = 0; i < 3; i++) { | ||
654 | struct omap_overlay *ovl; | ||
655 | ovl = omap_dss_get_overlay(i); | ||
656 | if (!ovl->manager || force) { | ||
657 | if (ovl->manager) | ||
658 | omap_dss_unset_manager(ovl); | ||
659 | omap_dss_set_manager(ovl, mgr); | ||
660 | } | ||
661 | } | ||
662 | } | ||
663 | } | ||
664 | |||
665 | void dss_uninit_overlays(struct platform_device *pdev) | ||
666 | { | ||
667 | struct omap_overlay *ovl; | ||
668 | |||
669 | while (!list_empty(&overlay_list)) { | ||
670 | ovl = list_first_entry(&overlay_list, | ||
671 | struct omap_overlay, list); | ||
672 | list_del(&ovl->list); | ||
673 | kobject_del(&ovl->kobj); | ||
674 | kobject_put(&ovl->kobj); | ||
675 | kfree(ovl); | ||
676 | } | ||
677 | |||
678 | num_overlays = 0; | ||
679 | } | ||
680 | |||
diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c new file mode 100644 index 000000000000..d0b3006ad8a5 --- /dev/null +++ b/drivers/video/omap2/dss/rfbi.c | |||
@@ -0,0 +1,1309 @@ | |||
1 | /* | ||
2 | * linux/drivers/video/omap2/dss/rfbi.c | ||
3 | * | ||
4 | * Copyright (C) 2009 Nokia Corporation | ||
5 | * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> | ||
6 | * | ||
7 | * Some code and ideas taken from drivers/video/omap/ driver | ||
8 | * by Imre Deak. | ||
9 | * | ||
10 | * This program is free software; you can redistribute it and/or modify it | ||
11 | * under the terms of the GNU General Public License version 2 as published by | ||
12 | * the Free Software Foundation. | ||
13 | * | ||
14 | * This program is distributed in the hope that it will be useful, but WITHOUT | ||
15 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | ||
16 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for | ||
17 | * more details. | ||
18 | * | ||
19 | * You should have received a copy of the GNU General Public License along with | ||
20 | * this program. If not, see <http://www.gnu.org/licenses/>. | ||
21 | */ | ||
22 | |||
23 | #define DSS_SUBSYS_NAME "RFBI" | ||
24 | |||
25 | #include <linux/kernel.h> | ||
26 | #include <linux/dma-mapping.h> | ||
27 | #include <linux/vmalloc.h> | ||
28 | #include <linux/clk.h> | ||
29 | #include <linux/io.h> | ||
30 | #include <linux/delay.h> | ||
31 | #include <linux/kfifo.h> | ||
32 | #include <linux/ktime.h> | ||
33 | #include <linux/hrtimer.h> | ||
34 | #include <linux/seq_file.h> | ||
35 | |||
36 | #include <plat/display.h> | ||
37 | #include "dss.h" | ||
38 | |||
39 | /*#define MEASURE_PERF*/ | ||
40 | |||
41 | #define RFBI_BASE 0x48050800 | ||
42 | |||
43 | struct rfbi_reg { u16 idx; }; | ||
44 | |||
45 | #define RFBI_REG(idx) ((const struct rfbi_reg) { idx }) | ||
46 | |||
47 | #define RFBI_REVISION RFBI_REG(0x0000) | ||
48 | #define RFBI_SYSCONFIG RFBI_REG(0x0010) | ||
49 | #define RFBI_SYSSTATUS RFBI_REG(0x0014) | ||
50 | #define RFBI_CONTROL RFBI_REG(0x0040) | ||
51 | #define RFBI_PIXEL_CNT RFBI_REG(0x0044) | ||
52 | #define RFBI_LINE_NUMBER RFBI_REG(0x0048) | ||
53 | #define RFBI_CMD RFBI_REG(0x004c) | ||
54 | #define RFBI_PARAM RFBI_REG(0x0050) | ||
55 | #define RFBI_DATA RFBI_REG(0x0054) | ||
56 | #define RFBI_READ RFBI_REG(0x0058) | ||
57 | #define RFBI_STATUS RFBI_REG(0x005c) | ||
58 | |||
59 | #define RFBI_CONFIG(n) RFBI_REG(0x0060 + (n)*0x18) | ||
60 | #define RFBI_ONOFF_TIME(n) RFBI_REG(0x0064 + (n)*0x18) | ||
61 | #define RFBI_CYCLE_TIME(n) RFBI_REG(0x0068 + (n)*0x18) | ||
62 | #define RFBI_DATA_CYCLE1(n) RFBI_REG(0x006c + (n)*0x18) | ||
63 | #define RFBI_DATA_CYCLE2(n) RFBI_REG(0x0070 + (n)*0x18) | ||
64 | #define RFBI_DATA_CYCLE3(n) RFBI_REG(0x0074 + (n)*0x18) | ||
65 | |||
66 | #define RFBI_VSYNC_WIDTH RFBI_REG(0x0090) | ||
67 | #define RFBI_HSYNC_WIDTH RFBI_REG(0x0094) | ||
68 | |||
69 | #define RFBI_CMD_FIFO_LEN_BYTES (16 * sizeof(struct update_param)) | ||
70 | |||
71 | #define REG_FLD_MOD(idx, val, start, end) \ | ||
72 | rfbi_write_reg(idx, FLD_MOD(rfbi_read_reg(idx), val, start, end)) | ||
73 | |||
74 | /* To work around an RFBI transfer rate limitation */ | ||
75 | #define OMAP_RFBI_RATE_LIMIT 1 | ||
76 | |||
77 | enum omap_rfbi_cycleformat { | ||
78 | OMAP_DSS_RFBI_CYCLEFORMAT_1_1 = 0, | ||
79 | OMAP_DSS_RFBI_CYCLEFORMAT_2_1 = 1, | ||
80 | OMAP_DSS_RFBI_CYCLEFORMAT_3_1 = 2, | ||
81 | OMAP_DSS_RFBI_CYCLEFORMAT_3_2 = 3, | ||
82 | }; | ||
83 | |||
84 | enum omap_rfbi_datatype { | ||
85 | OMAP_DSS_RFBI_DATATYPE_12 = 0, | ||
86 | OMAP_DSS_RFBI_DATATYPE_16 = 1, | ||
87 | OMAP_DSS_RFBI_DATATYPE_18 = 2, | ||
88 | OMAP_DSS_RFBI_DATATYPE_24 = 3, | ||
89 | }; | ||
90 | |||
91 | enum omap_rfbi_parallelmode { | ||
92 | OMAP_DSS_RFBI_PARALLELMODE_8 = 0, | ||
93 | OMAP_DSS_RFBI_PARALLELMODE_9 = 1, | ||
94 | OMAP_DSS_RFBI_PARALLELMODE_12 = 2, | ||
95 | OMAP_DSS_RFBI_PARALLELMODE_16 = 3, | ||
96 | }; | ||
97 | |||
98 | enum update_cmd { | ||
99 | RFBI_CMD_UPDATE = 0, | ||
100 | RFBI_CMD_SYNC = 1, | ||
101 | }; | ||
102 | |||
103 | static int rfbi_convert_timings(struct rfbi_timings *t); | ||
104 | static void rfbi_get_clk_info(u32 *clk_period, u32 *max_clk_div); | ||
105 | static void process_cmd_fifo(void); | ||
106 | |||
107 | static struct { | ||
108 | void __iomem *base; | ||
109 | |||
110 | unsigned long l4_khz; | ||
111 | |||
112 | enum omap_rfbi_datatype datatype; | ||
113 | enum omap_rfbi_parallelmode parallelmode; | ||
114 | |||
115 | enum omap_rfbi_te_mode te_mode; | ||
116 | int te_enabled; | ||
117 | |||
118 | void (*framedone_callback)(void *data); | ||
119 | void *framedone_callback_data; | ||
120 | |||
121 | struct omap_dss_device *dssdev[2]; | ||
122 | |||
123 | struct kfifo *cmd_fifo; | ||
124 | spinlock_t cmd_lock; | ||
125 | struct completion cmd_done; | ||
126 | atomic_t cmd_fifo_full; | ||
127 | atomic_t cmd_pending; | ||
128 | #ifdef MEASURE_PERF | ||
129 | unsigned perf_bytes; | ||
130 | ktime_t perf_setup_time; | ||
131 | ktime_t perf_start_time; | ||
132 | #endif | ||
133 | } rfbi; | ||
134 | |||
135 | struct update_region { | ||
136 | u16 x; | ||
137 | u16 y; | ||
138 | u16 w; | ||
139 | u16 h; | ||
140 | }; | ||
141 | |||
142 | struct update_param { | ||
143 | u8 rfbi_module; | ||
144 | u8 cmd; | ||
145 | |||
146 | union { | ||
147 | struct update_region r; | ||
148 | struct completion *sync; | ||
149 | } par; | ||
150 | }; | ||
151 | |||
152 | static inline void rfbi_write_reg(const struct rfbi_reg idx, u32 val) | ||
153 | { | ||
154 | __raw_writel(val, rfbi.base + idx.idx); | ||
155 | } | ||
156 | |||
157 | static inline u32 rfbi_read_reg(const struct rfbi_reg idx) | ||
158 | { | ||
159 | return __raw_readl(rfbi.base + idx.idx); | ||
160 | } | ||
161 | |||
162 | static void rfbi_enable_clocks(bool enable) | ||
163 | { | ||
164 | if (enable) | ||
165 | dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); | ||
166 | else | ||
167 | dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); | ||
168 | } | ||
169 | |||
170 | void omap_rfbi_write_command(const void *buf, u32 len) | ||
171 | { | ||
172 | rfbi_enable_clocks(1); | ||
173 | switch (rfbi.parallelmode) { | ||
174 | case OMAP_DSS_RFBI_PARALLELMODE_8: | ||
175 | { | ||
176 | const u8 *b = buf; | ||
177 | for (; len; len--) | ||
178 | rfbi_write_reg(RFBI_CMD, *b++); | ||
179 | break; | ||
180 | } | ||
181 | |||
182 | case OMAP_DSS_RFBI_PARALLELMODE_16: | ||
183 | { | ||
184 | const u16 *w = buf; | ||
185 | BUG_ON(len & 1); | ||
186 | for (; len; len -= 2) | ||
187 | rfbi_write_reg(RFBI_CMD, *w++); | ||
188 | break; | ||
189 | } | ||
190 | |||
191 | case OMAP_DSS_RFBI_PARALLELMODE_9: | ||
192 | case OMAP_DSS_RFBI_PARALLELMODE_12: | ||
193 | default: | ||
194 | BUG(); | ||
195 | } | ||
196 | rfbi_enable_clocks(0); | ||
197 | } | ||
198 | EXPORT_SYMBOL(omap_rfbi_write_command); | ||
199 | |||
200 | void omap_rfbi_read_data(void *buf, u32 len) | ||
201 | { | ||
202 | rfbi_enable_clocks(1); | ||
203 | switch (rfbi.parallelmode) { | ||
204 | case OMAP_DSS_RFBI_PARALLELMODE_8: | ||
205 | { | ||
206 | u8 *b = buf; | ||
207 | for (; len; len--) { | ||
208 | rfbi_write_reg(RFBI_READ, 0); | ||
209 | *b++ = rfbi_read_reg(RFBI_READ); | ||
210 | } | ||
211 | break; | ||
212 | } | ||
213 | |||
214 | case OMAP_DSS_RFBI_PARALLELMODE_16: | ||
215 | { | ||
216 | u16 *w = buf; | ||
217 | BUG_ON(len & ~1); | ||
218 | for (; len; len -= 2) { | ||
219 | rfbi_write_reg(RFBI_READ, 0); | ||
220 | *w++ = rfbi_read_reg(RFBI_READ); | ||
221 | } | ||
222 | break; | ||
223 | } | ||
224 | |||
225 | case OMAP_DSS_RFBI_PARALLELMODE_9: | ||
226 | case OMAP_DSS_RFBI_PARALLELMODE_12: | ||
227 | default: | ||
228 | BUG(); | ||
229 | } | ||
230 | rfbi_enable_clocks(0); | ||
231 | } | ||
232 | EXPORT_SYMBOL(omap_rfbi_read_data); | ||
233 | |||
234 | void omap_rfbi_write_data(const void *buf, u32 len) | ||
235 | { | ||
236 | rfbi_enable_clocks(1); | ||
237 | switch (rfbi.parallelmode) { | ||
238 | case OMAP_DSS_RFBI_PARALLELMODE_8: | ||
239 | { | ||
240 | const u8 *b = buf; | ||
241 | for (; len; len--) | ||
242 | rfbi_write_reg(RFBI_PARAM, *b++); | ||
243 | break; | ||
244 | } | ||
245 | |||
246 | case OMAP_DSS_RFBI_PARALLELMODE_16: | ||
247 | { | ||
248 | const u16 *w = buf; | ||
249 | BUG_ON(len & 1); | ||
250 | for (; len; len -= 2) | ||
251 | rfbi_write_reg(RFBI_PARAM, *w++); | ||
252 | break; | ||
253 | } | ||
254 | |||
255 | case OMAP_DSS_RFBI_PARALLELMODE_9: | ||
256 | case OMAP_DSS_RFBI_PARALLELMODE_12: | ||
257 | default: | ||
258 | BUG(); | ||
259 | |||
260 | } | ||
261 | rfbi_enable_clocks(0); | ||
262 | } | ||
263 | EXPORT_SYMBOL(omap_rfbi_write_data); | ||
264 | |||
265 | void omap_rfbi_write_pixels(const void __iomem *buf, int scr_width, | ||
266 | u16 x, u16 y, | ||
267 | u16 w, u16 h) | ||
268 | { | ||
269 | int start_offset = scr_width * y + x; | ||
270 | int horiz_offset = scr_width - w; | ||
271 | int i; | ||
272 | |||
273 | rfbi_enable_clocks(1); | ||
274 | |||
275 | if (rfbi.datatype == OMAP_DSS_RFBI_DATATYPE_16 && | ||
276 | rfbi.parallelmode == OMAP_DSS_RFBI_PARALLELMODE_8) { | ||
277 | const u16 __iomem *pd = buf; | ||
278 | pd += start_offset; | ||
279 | |||
280 | for (; h; --h) { | ||
281 | for (i = 0; i < w; ++i) { | ||
282 | const u8 __iomem *b = (const u8 __iomem *)pd; | ||
283 | rfbi_write_reg(RFBI_PARAM, __raw_readb(b+1)); | ||
284 | rfbi_write_reg(RFBI_PARAM, __raw_readb(b+0)); | ||
285 | ++pd; | ||
286 | } | ||
287 | pd += horiz_offset; | ||
288 | } | ||
289 | } else if (rfbi.datatype == OMAP_DSS_RFBI_DATATYPE_24 && | ||
290 | rfbi.parallelmode == OMAP_DSS_RFBI_PARALLELMODE_8) { | ||
291 | const u32 __iomem *pd = buf; | ||
292 | pd += start_offset; | ||
293 | |||
294 | for (; h; --h) { | ||
295 | for (i = 0; i < w; ++i) { | ||
296 | const u8 __iomem *b = (const u8 __iomem *)pd; | ||
297 | rfbi_write_reg(RFBI_PARAM, __raw_readb(b+2)); | ||
298 | rfbi_write_reg(RFBI_PARAM, __raw_readb(b+1)); | ||
299 | rfbi_write_reg(RFBI_PARAM, __raw_readb(b+0)); | ||
300 | ++pd; | ||
301 | } | ||
302 | pd += horiz_offset; | ||
303 | } | ||
304 | } else if (rfbi.datatype == OMAP_DSS_RFBI_DATATYPE_16 && | ||
305 | rfbi.parallelmode == OMAP_DSS_RFBI_PARALLELMODE_16) { | ||
306 | const u16 __iomem *pd = buf; | ||
307 | pd += start_offset; | ||
308 | |||
309 | for (; h; --h) { | ||
310 | for (i = 0; i < w; ++i) { | ||
311 | rfbi_write_reg(RFBI_PARAM, __raw_readw(pd)); | ||
312 | ++pd; | ||
313 | } | ||
314 | pd += horiz_offset; | ||
315 | } | ||
316 | } else { | ||
317 | BUG(); | ||
318 | } | ||
319 | |||
320 | rfbi_enable_clocks(0); | ||
321 | } | ||
322 | EXPORT_SYMBOL(omap_rfbi_write_pixels); | ||
323 | |||
324 | #ifdef MEASURE_PERF | ||
325 | static void perf_mark_setup(void) | ||
326 | { | ||
327 | rfbi.perf_setup_time = ktime_get(); | ||
328 | } | ||
329 | |||
330 | static void perf_mark_start(void) | ||
331 | { | ||
332 | rfbi.perf_start_time = ktime_get(); | ||
333 | } | ||
334 | |||
335 | static void perf_show(const char *name) | ||
336 | { | ||
337 | ktime_t t, setup_time, trans_time; | ||
338 | u32 total_bytes; | ||
339 | u32 setup_us, trans_us, total_us; | ||
340 | |||
341 | t = ktime_get(); | ||
342 | |||
343 | setup_time = ktime_sub(rfbi.perf_start_time, rfbi.perf_setup_time); | ||
344 | setup_us = (u32)ktime_to_us(setup_time); | ||
345 | if (setup_us == 0) | ||
346 | setup_us = 1; | ||
347 | |||
348 | trans_time = ktime_sub(t, rfbi.perf_start_time); | ||
349 | trans_us = (u32)ktime_to_us(trans_time); | ||
350 | if (trans_us == 0) | ||
351 | trans_us = 1; | ||
352 | |||
353 | total_us = setup_us + trans_us; | ||
354 | |||
355 | total_bytes = rfbi.perf_bytes; | ||
356 | |||
357 | DSSINFO("%s update %u us + %u us = %u us (%uHz), %u bytes, " | ||
358 | "%u kbytes/sec\n", | ||
359 | name, | ||
360 | setup_us, | ||
361 | trans_us, | ||
362 | total_us, | ||
363 | 1000*1000 / total_us, | ||
364 | total_bytes, | ||
365 | total_bytes * 1000 / total_us); | ||
366 | } | ||
367 | #else | ||
368 | #define perf_mark_setup() | ||
369 | #define perf_mark_start() | ||
370 | #define perf_show(x) | ||
371 | #endif | ||
372 | |||
373 | void rfbi_transfer_area(u16 width, u16 height, | ||
374 | void (callback)(void *data), void *data) | ||
375 | { | ||
376 | u32 l; | ||
377 | |||
378 | /*BUG_ON(callback == 0);*/ | ||
379 | BUG_ON(rfbi.framedone_callback != NULL); | ||
380 | |||
381 | DSSDBG("rfbi_transfer_area %dx%d\n", width, height); | ||
382 | |||
383 | dispc_set_lcd_size(width, height); | ||
384 | |||
385 | dispc_enable_lcd_out(1); | ||
386 | |||
387 | rfbi.framedone_callback = callback; | ||
388 | rfbi.framedone_callback_data = data; | ||
389 | |||
390 | rfbi_enable_clocks(1); | ||
391 | |||
392 | rfbi_write_reg(RFBI_PIXEL_CNT, width * height); | ||
393 | |||
394 | l = rfbi_read_reg(RFBI_CONTROL); | ||
395 | l = FLD_MOD(l, 1, 0, 0); /* enable */ | ||
396 | if (!rfbi.te_enabled) | ||
397 | l = FLD_MOD(l, 1, 4, 4); /* ITE */ | ||
398 | |||
399 | perf_mark_start(); | ||
400 | |||
401 | rfbi_write_reg(RFBI_CONTROL, l); | ||
402 | } | ||
403 | |||
404 | static void framedone_callback(void *data, u32 mask) | ||
405 | { | ||
406 | void (*callback)(void *data); | ||
407 | |||
408 | DSSDBG("FRAMEDONE\n"); | ||
409 | |||
410 | perf_show("DISPC"); | ||
411 | |||
412 | REG_FLD_MOD(RFBI_CONTROL, 0, 0, 0); | ||
413 | |||
414 | rfbi_enable_clocks(0); | ||
415 | |||
416 | callback = rfbi.framedone_callback; | ||
417 | rfbi.framedone_callback = NULL; | ||
418 | |||
419 | /*callback(rfbi.framedone_callback_data);*/ | ||
420 | |||
421 | atomic_set(&rfbi.cmd_pending, 0); | ||
422 | |||
423 | process_cmd_fifo(); | ||
424 | } | ||
425 | |||
426 | #if 1 /* VERBOSE */ | ||
427 | static void rfbi_print_timings(void) | ||
428 | { | ||
429 | u32 l; | ||
430 | u32 time; | ||
431 | |||
432 | l = rfbi_read_reg(RFBI_CONFIG(0)); | ||
433 | time = 1000000000 / rfbi.l4_khz; | ||
434 | if (l & (1 << 4)) | ||
435 | time *= 2; | ||
436 | |||
437 | DSSDBG("Tick time %u ps\n", time); | ||
438 | l = rfbi_read_reg(RFBI_ONOFF_TIME(0)); | ||
439 | DSSDBG("CSONTIME %d, CSOFFTIME %d, WEONTIME %d, WEOFFTIME %d, " | ||
440 | "REONTIME %d, REOFFTIME %d\n", | ||
441 | l & 0x0f, (l >> 4) & 0x3f, (l >> 10) & 0x0f, (l >> 14) & 0x3f, | ||
442 | (l >> 20) & 0x0f, (l >> 24) & 0x3f); | ||
443 | |||
444 | l = rfbi_read_reg(RFBI_CYCLE_TIME(0)); | ||
445 | DSSDBG("WECYCLETIME %d, RECYCLETIME %d, CSPULSEWIDTH %d, " | ||
446 | "ACCESSTIME %d\n", | ||
447 | (l & 0x3f), (l >> 6) & 0x3f, (l >> 12) & 0x3f, | ||
448 | (l >> 22) & 0x3f); | ||
449 | } | ||
450 | #else | ||
451 | static void rfbi_print_timings(void) {} | ||
452 | #endif | ||
453 | |||
454 | |||
455 | |||
456 | |||
457 | static u32 extif_clk_period; | ||
458 | |||
459 | static inline unsigned long round_to_extif_ticks(unsigned long ps, int div) | ||
460 | { | ||
461 | int bus_tick = extif_clk_period * div; | ||
462 | return (ps + bus_tick - 1) / bus_tick * bus_tick; | ||
463 | } | ||
464 | |||
465 | static int calc_reg_timing(struct rfbi_timings *t, int div) | ||
466 | { | ||
467 | t->clk_div = div; | ||
468 | |||
469 | t->cs_on_time = round_to_extif_ticks(t->cs_on_time, div); | ||
470 | |||
471 | t->we_on_time = round_to_extif_ticks(t->we_on_time, div); | ||
472 | t->we_off_time = round_to_extif_ticks(t->we_off_time, div); | ||
473 | t->we_cycle_time = round_to_extif_ticks(t->we_cycle_time, div); | ||
474 | |||
475 | t->re_on_time = round_to_extif_ticks(t->re_on_time, div); | ||
476 | t->re_off_time = round_to_extif_ticks(t->re_off_time, div); | ||
477 | t->re_cycle_time = round_to_extif_ticks(t->re_cycle_time, div); | ||
478 | |||
479 | t->access_time = round_to_extif_ticks(t->access_time, div); | ||
480 | t->cs_off_time = round_to_extif_ticks(t->cs_off_time, div); | ||
481 | t->cs_pulse_width = round_to_extif_ticks(t->cs_pulse_width, div); | ||
482 | |||
483 | DSSDBG("[reg]cson %d csoff %d reon %d reoff %d\n", | ||
484 | t->cs_on_time, t->cs_off_time, t->re_on_time, t->re_off_time); | ||
485 | DSSDBG("[reg]weon %d weoff %d recyc %d wecyc %d\n", | ||
486 | t->we_on_time, t->we_off_time, t->re_cycle_time, | ||
487 | t->we_cycle_time); | ||
488 | DSSDBG("[reg]rdaccess %d cspulse %d\n", | ||
489 | t->access_time, t->cs_pulse_width); | ||
490 | |||
491 | return rfbi_convert_timings(t); | ||
492 | } | ||
493 | |||
494 | static int calc_extif_timings(struct rfbi_timings *t) | ||
495 | { | ||
496 | u32 max_clk_div; | ||
497 | int div; | ||
498 | |||
499 | rfbi_get_clk_info(&extif_clk_period, &max_clk_div); | ||
500 | for (div = 1; div <= max_clk_div; div++) { | ||
501 | if (calc_reg_timing(t, div) == 0) | ||
502 | break; | ||
503 | } | ||
504 | |||
505 | if (div <= max_clk_div) | ||
506 | return 0; | ||
507 | |||
508 | DSSERR("can't setup timings\n"); | ||
509 | return -1; | ||
510 | } | ||
511 | |||
512 | |||
513 | void rfbi_set_timings(int rfbi_module, struct rfbi_timings *t) | ||
514 | { | ||
515 | int r; | ||
516 | |||
517 | if (!t->converted) { | ||
518 | r = calc_extif_timings(t); | ||
519 | if (r < 0) | ||
520 | DSSERR("Failed to calc timings\n"); | ||
521 | } | ||
522 | |||
523 | BUG_ON(!t->converted); | ||
524 | |||
525 | rfbi_enable_clocks(1); | ||
526 | rfbi_write_reg(RFBI_ONOFF_TIME(rfbi_module), t->tim[0]); | ||
527 | rfbi_write_reg(RFBI_CYCLE_TIME(rfbi_module), t->tim[1]); | ||
528 | |||
529 | /* TIMEGRANULARITY */ | ||
530 | REG_FLD_MOD(RFBI_CONFIG(rfbi_module), | ||
531 | (t->tim[2] ? 1 : 0), 4, 4); | ||
532 | |||
533 | rfbi_print_timings(); | ||
534 | rfbi_enable_clocks(0); | ||
535 | } | ||
536 | |||
537 | static int ps_to_rfbi_ticks(int time, int div) | ||
538 | { | ||
539 | unsigned long tick_ps; | ||
540 | int ret; | ||
541 | |||
542 | /* Calculate in picosecs to yield more exact results */ | ||
543 | tick_ps = 1000000000 / (rfbi.l4_khz) * div; | ||
544 | |||
545 | ret = (time + tick_ps - 1) / tick_ps; | ||
546 | |||
547 | return ret; | ||
548 | } | ||
549 | |||
550 | #ifdef OMAP_RFBI_RATE_LIMIT | ||
551 | unsigned long rfbi_get_max_tx_rate(void) | ||
552 | { | ||
553 | unsigned long l4_rate, dss1_rate; | ||
554 | int min_l4_ticks = 0; | ||
555 | int i; | ||
556 | |||
557 | /* According to TI this can't be calculated so make the | ||
558 | * adjustments for a couple of known frequencies and warn for | ||
559 | * others. | ||
560 | */ | ||
561 | static const struct { | ||
562 | unsigned long l4_clk; /* HZ */ | ||
563 | unsigned long dss1_clk; /* HZ */ | ||
564 | unsigned long min_l4_ticks; | ||
565 | } ftab[] = { | ||
566 | { 55, 132, 7, }, /* 7.86 MPix/s */ | ||
567 | { 110, 110, 12, }, /* 9.16 MPix/s */ | ||
568 | { 110, 132, 10, }, /* 11 Mpix/s */ | ||
569 | { 120, 120, 10, }, /* 12 Mpix/s */ | ||
570 | { 133, 133, 10, }, /* 13.3 Mpix/s */ | ||
571 | }; | ||
572 | |||
573 | l4_rate = rfbi.l4_khz / 1000; | ||
574 | dss1_rate = dss_clk_get_rate(DSS_CLK_FCK1) / 1000000; | ||
575 | |||
576 | for (i = 0; i < ARRAY_SIZE(ftab); i++) { | ||
577 | /* Use a window instead of an exact match, to account | ||
578 | * for different DPLL multiplier / divider pairs. | ||
579 | */ | ||
580 | if (abs(ftab[i].l4_clk - l4_rate) < 3 && | ||
581 | abs(ftab[i].dss1_clk - dss1_rate) < 3) { | ||
582 | min_l4_ticks = ftab[i].min_l4_ticks; | ||
583 | break; | ||
584 | } | ||
585 | } | ||
586 | if (i == ARRAY_SIZE(ftab)) { | ||
587 | /* Can't be sure, return anyway the maximum not | ||
588 | * rate-limited. This might cause a problem only for the | ||
589 | * tearing synchronisation. | ||
590 | */ | ||
591 | DSSERR("can't determine maximum RFBI transfer rate\n"); | ||
592 | return rfbi.l4_khz * 1000; | ||
593 | } | ||
594 | return rfbi.l4_khz * 1000 / min_l4_ticks; | ||
595 | } | ||
596 | #else | ||
597 | int rfbi_get_max_tx_rate(void) | ||
598 | { | ||
599 | return rfbi.l4_khz * 1000; | ||
600 | } | ||
601 | #endif | ||
602 | |||
603 | static void rfbi_get_clk_info(u32 *clk_period, u32 *max_clk_div) | ||
604 | { | ||
605 | *clk_period = 1000000000 / rfbi.l4_khz; | ||
606 | *max_clk_div = 2; | ||
607 | } | ||
608 | |||
609 | static int rfbi_convert_timings(struct rfbi_timings *t) | ||
610 | { | ||
611 | u32 l; | ||
612 | int reon, reoff, weon, weoff, cson, csoff, cs_pulse; | ||
613 | int actim, recyc, wecyc; | ||
614 | int div = t->clk_div; | ||
615 | |||
616 | if (div <= 0 || div > 2) | ||
617 | return -1; | ||
618 | |||
619 | /* Make sure that after conversion it still holds that: | ||
620 | * weoff > weon, reoff > reon, recyc >= reoff, wecyc >= weoff, | ||
621 | * csoff > cson, csoff >= max(weoff, reoff), actim > reon | ||
622 | */ | ||
623 | weon = ps_to_rfbi_ticks(t->we_on_time, div); | ||
624 | weoff = ps_to_rfbi_ticks(t->we_off_time, div); | ||
625 | if (weoff <= weon) | ||
626 | weoff = weon + 1; | ||
627 | if (weon > 0x0f) | ||
628 | return -1; | ||
629 | if (weoff > 0x3f) | ||
630 | return -1; | ||
631 | |||
632 | reon = ps_to_rfbi_ticks(t->re_on_time, div); | ||
633 | reoff = ps_to_rfbi_ticks(t->re_off_time, div); | ||
634 | if (reoff <= reon) | ||
635 | reoff = reon + 1; | ||
636 | if (reon > 0x0f) | ||
637 | return -1; | ||
638 | if (reoff > 0x3f) | ||
639 | return -1; | ||
640 | |||
641 | cson = ps_to_rfbi_ticks(t->cs_on_time, div); | ||
642 | csoff = ps_to_rfbi_ticks(t->cs_off_time, div); | ||
643 | if (csoff <= cson) | ||
644 | csoff = cson + 1; | ||
645 | if (csoff < max(weoff, reoff)) | ||
646 | csoff = max(weoff, reoff); | ||
647 | if (cson > 0x0f) | ||
648 | return -1; | ||
649 | if (csoff > 0x3f) | ||
650 | return -1; | ||
651 | |||
652 | l = cson; | ||
653 | l |= csoff << 4; | ||
654 | l |= weon << 10; | ||
655 | l |= weoff << 14; | ||
656 | l |= reon << 20; | ||
657 | l |= reoff << 24; | ||
658 | |||
659 | t->tim[0] = l; | ||
660 | |||
661 | actim = ps_to_rfbi_ticks(t->access_time, div); | ||
662 | if (actim <= reon) | ||
663 | actim = reon + 1; | ||
664 | if (actim > 0x3f) | ||
665 | return -1; | ||
666 | |||
667 | wecyc = ps_to_rfbi_ticks(t->we_cycle_time, div); | ||
668 | if (wecyc < weoff) | ||
669 | wecyc = weoff; | ||
670 | if (wecyc > 0x3f) | ||
671 | return -1; | ||
672 | |||
673 | recyc = ps_to_rfbi_ticks(t->re_cycle_time, div); | ||
674 | if (recyc < reoff) | ||
675 | recyc = reoff; | ||
676 | if (recyc > 0x3f) | ||
677 | return -1; | ||
678 | |||
679 | cs_pulse = ps_to_rfbi_ticks(t->cs_pulse_width, div); | ||
680 | if (cs_pulse > 0x3f) | ||
681 | return -1; | ||
682 | |||
683 | l = wecyc; | ||
684 | l |= recyc << 6; | ||
685 | l |= cs_pulse << 12; | ||
686 | l |= actim << 22; | ||
687 | |||
688 | t->tim[1] = l; | ||
689 | |||
690 | t->tim[2] = div - 1; | ||
691 | |||
692 | t->converted = 1; | ||
693 | |||
694 | return 0; | ||
695 | } | ||
696 | |||
697 | /* xxx FIX module selection missing */ | ||
698 | int omap_rfbi_setup_te(enum omap_rfbi_te_mode mode, | ||
699 | unsigned hs_pulse_time, unsigned vs_pulse_time, | ||
700 | int hs_pol_inv, int vs_pol_inv, int extif_div) | ||
701 | { | ||
702 | int hs, vs; | ||
703 | int min; | ||
704 | u32 l; | ||
705 | |||
706 | hs = ps_to_rfbi_ticks(hs_pulse_time, 1); | ||
707 | vs = ps_to_rfbi_ticks(vs_pulse_time, 1); | ||
708 | if (hs < 2) | ||
709 | return -EDOM; | ||
710 | if (mode == OMAP_DSS_RFBI_TE_MODE_2) | ||
711 | min = 2; | ||
712 | else /* OMAP_DSS_RFBI_TE_MODE_1 */ | ||
713 | min = 4; | ||
714 | if (vs < min) | ||
715 | return -EDOM; | ||
716 | if (vs == hs) | ||
717 | return -EINVAL; | ||
718 | rfbi.te_mode = mode; | ||
719 | DSSDBG("setup_te: mode %d hs %d vs %d hs_inv %d vs_inv %d\n", | ||
720 | mode, hs, vs, hs_pol_inv, vs_pol_inv); | ||
721 | |||
722 | rfbi_enable_clocks(1); | ||
723 | rfbi_write_reg(RFBI_HSYNC_WIDTH, hs); | ||
724 | rfbi_write_reg(RFBI_VSYNC_WIDTH, vs); | ||
725 | |||
726 | l = rfbi_read_reg(RFBI_CONFIG(0)); | ||
727 | if (hs_pol_inv) | ||
728 | l &= ~(1 << 21); | ||
729 | else | ||
730 | l |= 1 << 21; | ||
731 | if (vs_pol_inv) | ||
732 | l &= ~(1 << 20); | ||
733 | else | ||
734 | l |= 1 << 20; | ||
735 | rfbi_enable_clocks(0); | ||
736 | |||
737 | return 0; | ||
738 | } | ||
739 | EXPORT_SYMBOL(omap_rfbi_setup_te); | ||
740 | |||
741 | /* xxx FIX module selection missing */ | ||
742 | int omap_rfbi_enable_te(bool enable, unsigned line) | ||
743 | { | ||
744 | u32 l; | ||
745 | |||
746 | DSSDBG("te %d line %d mode %d\n", enable, line, rfbi.te_mode); | ||
747 | if (line > (1 << 11) - 1) | ||
748 | return -EINVAL; | ||
749 | |||
750 | rfbi_enable_clocks(1); | ||
751 | l = rfbi_read_reg(RFBI_CONFIG(0)); | ||
752 | l &= ~(0x3 << 2); | ||
753 | if (enable) { | ||
754 | rfbi.te_enabled = 1; | ||
755 | l |= rfbi.te_mode << 2; | ||
756 | } else | ||
757 | rfbi.te_enabled = 0; | ||
758 | rfbi_write_reg(RFBI_CONFIG(0), l); | ||
759 | rfbi_write_reg(RFBI_LINE_NUMBER, line); | ||
760 | rfbi_enable_clocks(0); | ||
761 | |||
762 | return 0; | ||
763 | } | ||
764 | EXPORT_SYMBOL(omap_rfbi_enable_te); | ||
765 | |||
766 | #if 0 | ||
767 | static void rfbi_enable_config(int enable1, int enable2) | ||
768 | { | ||
769 | u32 l; | ||
770 | int cs = 0; | ||
771 | |||
772 | if (enable1) | ||
773 | cs |= 1<<0; | ||
774 | if (enable2) | ||
775 | cs |= 1<<1; | ||
776 | |||
777 | rfbi_enable_clocks(1); | ||
778 | |||
779 | l = rfbi_read_reg(RFBI_CONTROL); | ||
780 | |||
781 | l = FLD_MOD(l, cs, 3, 2); | ||
782 | l = FLD_MOD(l, 0, 1, 1); | ||
783 | |||
784 | rfbi_write_reg(RFBI_CONTROL, l); | ||
785 | |||
786 | |||
787 | l = rfbi_read_reg(RFBI_CONFIG(0)); | ||
788 | l = FLD_MOD(l, 0, 3, 2); /* TRIGGERMODE: ITE */ | ||
789 | /*l |= FLD_VAL(2, 8, 7); */ /* L4FORMAT, 2pix/L4 */ | ||
790 | /*l |= FLD_VAL(0, 8, 7); */ /* L4FORMAT, 1pix/L4 */ | ||
791 | |||
792 | l = FLD_MOD(l, 0, 16, 16); /* A0POLARITY */ | ||
793 | l = FLD_MOD(l, 1, 20, 20); /* TE_VSYNC_POLARITY */ | ||
794 | l = FLD_MOD(l, 1, 21, 21); /* HSYNCPOLARITY */ | ||
795 | |||
796 | l = FLD_MOD(l, OMAP_DSS_RFBI_PARALLELMODE_8, 1, 0); | ||
797 | rfbi_write_reg(RFBI_CONFIG(0), l); | ||
798 | |||
799 | rfbi_enable_clocks(0); | ||
800 | } | ||
801 | #endif | ||
802 | |||
803 | int rfbi_configure(int rfbi_module, int bpp, int lines) | ||
804 | { | ||
805 | u32 l; | ||
806 | int cycle1 = 0, cycle2 = 0, cycle3 = 0; | ||
807 | enum omap_rfbi_cycleformat cycleformat; | ||
808 | enum omap_rfbi_datatype datatype; | ||
809 | enum omap_rfbi_parallelmode parallelmode; | ||
810 | |||
811 | switch (bpp) { | ||
812 | case 12: | ||
813 | datatype = OMAP_DSS_RFBI_DATATYPE_12; | ||
814 | break; | ||
815 | case 16: | ||
816 | datatype = OMAP_DSS_RFBI_DATATYPE_16; | ||
817 | break; | ||
818 | case 18: | ||
819 | datatype = OMAP_DSS_RFBI_DATATYPE_18; | ||
820 | break; | ||
821 | case 24: | ||
822 | datatype = OMAP_DSS_RFBI_DATATYPE_24; | ||
823 | break; | ||
824 | default: | ||
825 | BUG(); | ||
826 | return 1; | ||
827 | } | ||
828 | rfbi.datatype = datatype; | ||
829 | |||
830 | switch (lines) { | ||
831 | case 8: | ||
832 | parallelmode = OMAP_DSS_RFBI_PARALLELMODE_8; | ||
833 | break; | ||
834 | case 9: | ||
835 | parallelmode = OMAP_DSS_RFBI_PARALLELMODE_9; | ||
836 | break; | ||
837 | case 12: | ||
838 | parallelmode = OMAP_DSS_RFBI_PARALLELMODE_12; | ||
839 | break; | ||
840 | case 16: | ||
841 | parallelmode = OMAP_DSS_RFBI_PARALLELMODE_16; | ||
842 | break; | ||
843 | default: | ||
844 | BUG(); | ||
845 | return 1; | ||
846 | } | ||
847 | rfbi.parallelmode = parallelmode; | ||
848 | |||
849 | if ((bpp % lines) == 0) { | ||
850 | switch (bpp / lines) { | ||
851 | case 1: | ||
852 | cycleformat = OMAP_DSS_RFBI_CYCLEFORMAT_1_1; | ||
853 | break; | ||
854 | case 2: | ||
855 | cycleformat = OMAP_DSS_RFBI_CYCLEFORMAT_2_1; | ||
856 | break; | ||
857 | case 3: | ||
858 | cycleformat = OMAP_DSS_RFBI_CYCLEFORMAT_3_1; | ||
859 | break; | ||
860 | default: | ||
861 | BUG(); | ||
862 | return 1; | ||
863 | } | ||
864 | } else if ((2 * bpp % lines) == 0) { | ||
865 | if ((2 * bpp / lines) == 3) | ||
866 | cycleformat = OMAP_DSS_RFBI_CYCLEFORMAT_3_2; | ||
867 | else { | ||
868 | BUG(); | ||
869 | return 1; | ||
870 | } | ||
871 | } else { | ||
872 | BUG(); | ||
873 | return 1; | ||
874 | } | ||
875 | |||
876 | switch (cycleformat) { | ||
877 | case OMAP_DSS_RFBI_CYCLEFORMAT_1_1: | ||
878 | cycle1 = lines; | ||
879 | break; | ||
880 | |||
881 | case OMAP_DSS_RFBI_CYCLEFORMAT_2_1: | ||
882 | cycle1 = lines; | ||
883 | cycle2 = lines; | ||
884 | break; | ||
885 | |||
886 | case OMAP_DSS_RFBI_CYCLEFORMAT_3_1: | ||
887 | cycle1 = lines; | ||
888 | cycle2 = lines; | ||
889 | cycle3 = lines; | ||
890 | break; | ||
891 | |||
892 | case OMAP_DSS_RFBI_CYCLEFORMAT_3_2: | ||
893 | cycle1 = lines; | ||
894 | cycle2 = (lines / 2) | ((lines / 2) << 16); | ||
895 | cycle3 = (lines << 16); | ||
896 | break; | ||
897 | } | ||
898 | |||
899 | rfbi_enable_clocks(1); | ||
900 | |||
901 | REG_FLD_MOD(RFBI_CONTROL, 0, 3, 2); /* clear CS */ | ||
902 | |||
903 | l = 0; | ||
904 | l |= FLD_VAL(parallelmode, 1, 0); | ||
905 | l |= FLD_VAL(0, 3, 2); /* TRIGGERMODE: ITE */ | ||
906 | l |= FLD_VAL(0, 4, 4); /* TIMEGRANULARITY */ | ||
907 | l |= FLD_VAL(datatype, 6, 5); | ||
908 | /* l |= FLD_VAL(2, 8, 7); */ /* L4FORMAT, 2pix/L4 */ | ||
909 | l |= FLD_VAL(0, 8, 7); /* L4FORMAT, 1pix/L4 */ | ||
910 | l |= FLD_VAL(cycleformat, 10, 9); | ||
911 | l |= FLD_VAL(0, 12, 11); /* UNUSEDBITS */ | ||
912 | l |= FLD_VAL(0, 16, 16); /* A0POLARITY */ | ||
913 | l |= FLD_VAL(0, 17, 17); /* REPOLARITY */ | ||
914 | l |= FLD_VAL(0, 18, 18); /* WEPOLARITY */ | ||
915 | l |= FLD_VAL(0, 19, 19); /* CSPOLARITY */ | ||
916 | l |= FLD_VAL(1, 20, 20); /* TE_VSYNC_POLARITY */ | ||
917 | l |= FLD_VAL(1, 21, 21); /* HSYNCPOLARITY */ | ||
918 | rfbi_write_reg(RFBI_CONFIG(rfbi_module), l); | ||
919 | |||
920 | rfbi_write_reg(RFBI_DATA_CYCLE1(rfbi_module), cycle1); | ||
921 | rfbi_write_reg(RFBI_DATA_CYCLE2(rfbi_module), cycle2); | ||
922 | rfbi_write_reg(RFBI_DATA_CYCLE3(rfbi_module), cycle3); | ||
923 | |||
924 | |||
925 | l = rfbi_read_reg(RFBI_CONTROL); | ||
926 | l = FLD_MOD(l, rfbi_module+1, 3, 2); /* Select CSx */ | ||
927 | l = FLD_MOD(l, 0, 1, 1); /* clear bypass */ | ||
928 | rfbi_write_reg(RFBI_CONTROL, l); | ||
929 | |||
930 | |||
931 | DSSDBG("RFBI config: bpp %d, lines %d, cycles: 0x%x 0x%x 0x%x\n", | ||
932 | bpp, lines, cycle1, cycle2, cycle3); | ||
933 | |||
934 | rfbi_enable_clocks(0); | ||
935 | |||
936 | return 0; | ||
937 | } | ||
938 | EXPORT_SYMBOL(rfbi_configure); | ||
939 | |||
940 | static int rfbi_find_display(struct omap_dss_device *dssdev) | ||
941 | { | ||
942 | if (dssdev == rfbi.dssdev[0]) | ||
943 | return 0; | ||
944 | |||
945 | if (dssdev == rfbi.dssdev[1]) | ||
946 | return 1; | ||
947 | |||
948 | BUG(); | ||
949 | return -1; | ||
950 | } | ||
951 | |||
952 | |||
953 | static void signal_fifo_waiters(void) | ||
954 | { | ||
955 | if (atomic_read(&rfbi.cmd_fifo_full) > 0) { | ||
956 | /* DSSDBG("SIGNALING: Fifo not full for waiter!\n"); */ | ||
957 | complete(&rfbi.cmd_done); | ||
958 | atomic_dec(&rfbi.cmd_fifo_full); | ||
959 | } | ||
960 | } | ||
961 | |||
962 | /* returns 1 for async op, and 0 for sync op */ | ||
963 | static int do_update(struct omap_dss_device *dssdev, struct update_region *upd) | ||
964 | { | ||
965 | u16 x = upd->x; | ||
966 | u16 y = upd->y; | ||
967 | u16 w = upd->w; | ||
968 | u16 h = upd->h; | ||
969 | |||
970 | perf_mark_setup(); | ||
971 | |||
972 | if (dssdev->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) { | ||
973 | /*dssdev->driver->enable_te(dssdev, 1); */ | ||
974 | dss_setup_partial_planes(dssdev, &x, &y, &w, &h); | ||
975 | } | ||
976 | |||
977 | #ifdef MEASURE_PERF | ||
978 | rfbi.perf_bytes = w * h * 2; /* XXX always 16bit */ | ||
979 | #endif | ||
980 | |||
981 | dssdev->driver->setup_update(dssdev, x, y, w, h); | ||
982 | |||
983 | if (dssdev->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) { | ||
984 | rfbi_transfer_area(w, h, NULL, NULL); | ||
985 | return 1; | ||
986 | } else { | ||
987 | struct omap_overlay *ovl; | ||
988 | void __iomem *addr; | ||
989 | int scr_width; | ||
990 | |||
991 | ovl = dssdev->manager->overlays[0]; | ||
992 | scr_width = ovl->info.screen_width; | ||
993 | addr = ovl->info.vaddr; | ||
994 | |||
995 | omap_rfbi_write_pixels(addr, scr_width, x, y, w, h); | ||
996 | |||
997 | perf_show("L4"); | ||
998 | |||
999 | return 0; | ||
1000 | } | ||
1001 | } | ||
1002 | |||
1003 | static void process_cmd_fifo(void) | ||
1004 | { | ||
1005 | int len; | ||
1006 | struct update_param p; | ||
1007 | struct omap_dss_device *dssdev; | ||
1008 | unsigned long flags; | ||
1009 | |||
1010 | if (atomic_inc_return(&rfbi.cmd_pending) != 1) | ||
1011 | return; | ||
1012 | |||
1013 | while (true) { | ||
1014 | spin_lock_irqsave(rfbi.cmd_fifo->lock, flags); | ||
1015 | |||
1016 | len = __kfifo_get(rfbi.cmd_fifo, (unsigned char *)&p, | ||
1017 | sizeof(struct update_param)); | ||
1018 | if (len == 0) { | ||
1019 | DSSDBG("nothing more in fifo\n"); | ||
1020 | atomic_set(&rfbi.cmd_pending, 0); | ||
1021 | spin_unlock_irqrestore(rfbi.cmd_fifo->lock, flags); | ||
1022 | break; | ||
1023 | } | ||
1024 | |||
1025 | /* DSSDBG("fifo full %d\n", rfbi.cmd_fifo_full.counter);*/ | ||
1026 | |||
1027 | spin_unlock_irqrestore(rfbi.cmd_fifo->lock, flags); | ||
1028 | |||
1029 | BUG_ON(len != sizeof(struct update_param)); | ||
1030 | BUG_ON(p.rfbi_module > 1); | ||
1031 | |||
1032 | dssdev = rfbi.dssdev[p.rfbi_module]; | ||
1033 | |||
1034 | if (p.cmd == RFBI_CMD_UPDATE) { | ||
1035 | if (do_update(dssdev, &p.par.r)) | ||
1036 | break; /* async op */ | ||
1037 | } else if (p.cmd == RFBI_CMD_SYNC) { | ||
1038 | DSSDBG("Signaling SYNC done!\n"); | ||
1039 | complete(p.par.sync); | ||
1040 | } else | ||
1041 | BUG(); | ||
1042 | } | ||
1043 | |||
1044 | signal_fifo_waiters(); | ||
1045 | } | ||
1046 | |||
1047 | static void rfbi_push_cmd(struct update_param *p) | ||
1048 | { | ||
1049 | int ret; | ||
1050 | |||
1051 | while (1) { | ||
1052 | unsigned long flags; | ||
1053 | int available; | ||
1054 | |||
1055 | spin_lock_irqsave(rfbi.cmd_fifo->lock, flags); | ||
1056 | available = RFBI_CMD_FIFO_LEN_BYTES - | ||
1057 | __kfifo_len(rfbi.cmd_fifo); | ||
1058 | |||
1059 | /* DSSDBG("%d bytes left in fifo\n", available); */ | ||
1060 | if (available < sizeof(struct update_param)) { | ||
1061 | DSSDBG("Going to wait because FIFO FULL..\n"); | ||
1062 | spin_unlock_irqrestore(rfbi.cmd_fifo->lock, flags); | ||
1063 | atomic_inc(&rfbi.cmd_fifo_full); | ||
1064 | wait_for_completion(&rfbi.cmd_done); | ||
1065 | /*DSSDBG("Woke up because fifo not full anymore\n");*/ | ||
1066 | continue; | ||
1067 | } | ||
1068 | |||
1069 | ret = __kfifo_put(rfbi.cmd_fifo, (unsigned char *)p, | ||
1070 | sizeof(struct update_param)); | ||
1071 | /* DSSDBG("pushed %d bytes\n", ret);*/ | ||
1072 | |||
1073 | spin_unlock_irqrestore(rfbi.cmd_fifo->lock, flags); | ||
1074 | |||
1075 | BUG_ON(ret != sizeof(struct update_param)); | ||
1076 | |||
1077 | break; | ||
1078 | } | ||
1079 | } | ||
1080 | |||
1081 | static void rfbi_push_update(int rfbi_module, int x, int y, int w, int h) | ||
1082 | { | ||
1083 | struct update_param p; | ||
1084 | |||
1085 | p.rfbi_module = rfbi_module; | ||
1086 | p.cmd = RFBI_CMD_UPDATE; | ||
1087 | |||
1088 | p.par.r.x = x; | ||
1089 | p.par.r.y = y; | ||
1090 | p.par.r.w = w; | ||
1091 | p.par.r.h = h; | ||
1092 | |||
1093 | DSSDBG("RFBI pushed %d,%d %dx%d\n", x, y, w, h); | ||
1094 | |||
1095 | rfbi_push_cmd(&p); | ||
1096 | |||
1097 | process_cmd_fifo(); | ||
1098 | } | ||
1099 | |||
1100 | static void rfbi_push_sync(int rfbi_module, struct completion *sync_comp) | ||
1101 | { | ||
1102 | struct update_param p; | ||
1103 | |||
1104 | p.rfbi_module = rfbi_module; | ||
1105 | p.cmd = RFBI_CMD_SYNC; | ||
1106 | p.par.sync = sync_comp; | ||
1107 | |||
1108 | rfbi_push_cmd(&p); | ||
1109 | |||
1110 | DSSDBG("RFBI sync pushed to cmd fifo\n"); | ||
1111 | |||
1112 | process_cmd_fifo(); | ||
1113 | } | ||
1114 | |||
1115 | void rfbi_dump_regs(struct seq_file *s) | ||
1116 | { | ||
1117 | #define DUMPREG(r) seq_printf(s, "%-35s %08x\n", #r, rfbi_read_reg(r)) | ||
1118 | |||
1119 | dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); | ||
1120 | |||
1121 | DUMPREG(RFBI_REVISION); | ||
1122 | DUMPREG(RFBI_SYSCONFIG); | ||
1123 | DUMPREG(RFBI_SYSSTATUS); | ||
1124 | DUMPREG(RFBI_CONTROL); | ||
1125 | DUMPREG(RFBI_PIXEL_CNT); | ||
1126 | DUMPREG(RFBI_LINE_NUMBER); | ||
1127 | DUMPREG(RFBI_CMD); | ||
1128 | DUMPREG(RFBI_PARAM); | ||
1129 | DUMPREG(RFBI_DATA); | ||
1130 | DUMPREG(RFBI_READ); | ||
1131 | DUMPREG(RFBI_STATUS); | ||
1132 | |||
1133 | DUMPREG(RFBI_CONFIG(0)); | ||
1134 | DUMPREG(RFBI_ONOFF_TIME(0)); | ||
1135 | DUMPREG(RFBI_CYCLE_TIME(0)); | ||
1136 | DUMPREG(RFBI_DATA_CYCLE1(0)); | ||
1137 | DUMPREG(RFBI_DATA_CYCLE2(0)); | ||
1138 | DUMPREG(RFBI_DATA_CYCLE3(0)); | ||
1139 | |||
1140 | DUMPREG(RFBI_CONFIG(1)); | ||
1141 | DUMPREG(RFBI_ONOFF_TIME(1)); | ||
1142 | DUMPREG(RFBI_CYCLE_TIME(1)); | ||
1143 | DUMPREG(RFBI_DATA_CYCLE1(1)); | ||
1144 | DUMPREG(RFBI_DATA_CYCLE2(1)); | ||
1145 | DUMPREG(RFBI_DATA_CYCLE3(1)); | ||
1146 | |||
1147 | DUMPREG(RFBI_VSYNC_WIDTH); | ||
1148 | DUMPREG(RFBI_HSYNC_WIDTH); | ||
1149 | |||
1150 | dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); | ||
1151 | #undef DUMPREG | ||
1152 | } | ||
1153 | |||
1154 | int rfbi_init(void) | ||
1155 | { | ||
1156 | u32 rev; | ||
1157 | u32 l; | ||
1158 | |||
1159 | spin_lock_init(&rfbi.cmd_lock); | ||
1160 | rfbi.cmd_fifo = kfifo_alloc(RFBI_CMD_FIFO_LEN_BYTES, GFP_KERNEL, | ||
1161 | &rfbi.cmd_lock); | ||
1162 | if (IS_ERR(rfbi.cmd_fifo)) | ||
1163 | return -ENOMEM; | ||
1164 | |||
1165 | init_completion(&rfbi.cmd_done); | ||
1166 | atomic_set(&rfbi.cmd_fifo_full, 0); | ||
1167 | atomic_set(&rfbi.cmd_pending, 0); | ||
1168 | |||
1169 | rfbi.base = ioremap(RFBI_BASE, SZ_256); | ||
1170 | if (!rfbi.base) { | ||
1171 | DSSERR("can't ioremap RFBI\n"); | ||
1172 | return -ENOMEM; | ||
1173 | } | ||
1174 | |||
1175 | rfbi_enable_clocks(1); | ||
1176 | |||
1177 | msleep(10); | ||
1178 | |||
1179 | rfbi.l4_khz = dss_clk_get_rate(DSS_CLK_ICK) / 1000; | ||
1180 | |||
1181 | /* Enable autoidle and smart-idle */ | ||
1182 | l = rfbi_read_reg(RFBI_SYSCONFIG); | ||
1183 | l |= (1 << 0) | (2 << 3); | ||
1184 | rfbi_write_reg(RFBI_SYSCONFIG, l); | ||
1185 | |||
1186 | rev = rfbi_read_reg(RFBI_REVISION); | ||
1187 | printk(KERN_INFO "OMAP RFBI rev %d.%d\n", | ||
1188 | FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0)); | ||
1189 | |||
1190 | rfbi_enable_clocks(0); | ||
1191 | |||
1192 | return 0; | ||
1193 | } | ||
1194 | |||
1195 | void rfbi_exit(void) | ||
1196 | { | ||
1197 | DSSDBG("rfbi_exit\n"); | ||
1198 | |||
1199 | kfifo_free(rfbi.cmd_fifo); | ||
1200 | |||
1201 | iounmap(rfbi.base); | ||
1202 | } | ||
1203 | |||
1204 | /* struct omap_display support */ | ||
1205 | static int rfbi_display_update(struct omap_dss_device *dssdev, | ||
1206 | u16 x, u16 y, u16 w, u16 h) | ||
1207 | { | ||
1208 | int rfbi_module; | ||
1209 | |||
1210 | if (w == 0 || h == 0) | ||
1211 | return 0; | ||
1212 | |||
1213 | rfbi_module = rfbi_find_display(dssdev); | ||
1214 | |||
1215 | rfbi_push_update(rfbi_module, x, y, w, h); | ||
1216 | |||
1217 | return 0; | ||
1218 | } | ||
1219 | |||
1220 | static int rfbi_display_sync(struct omap_dss_device *dssdev) | ||
1221 | { | ||
1222 | struct completion sync_comp; | ||
1223 | int rfbi_module; | ||
1224 | |||
1225 | rfbi_module = rfbi_find_display(dssdev); | ||
1226 | |||
1227 | init_completion(&sync_comp); | ||
1228 | rfbi_push_sync(rfbi_module, &sync_comp); | ||
1229 | DSSDBG("Waiting for SYNC to happen...\n"); | ||
1230 | wait_for_completion(&sync_comp); | ||
1231 | DSSDBG("Released from SYNC\n"); | ||
1232 | return 0; | ||
1233 | } | ||
1234 | |||
1235 | static int rfbi_display_enable_te(struct omap_dss_device *dssdev, bool enable) | ||
1236 | { | ||
1237 | dssdev->driver->enable_te(dssdev, enable); | ||
1238 | return 0; | ||
1239 | } | ||
1240 | |||
1241 | static int rfbi_display_enable(struct omap_dss_device *dssdev) | ||
1242 | { | ||
1243 | int r; | ||
1244 | |||
1245 | r = omap_dss_start_device(dssdev); | ||
1246 | if (r) { | ||
1247 | DSSERR("failed to start device\n"); | ||
1248 | goto err0; | ||
1249 | } | ||
1250 | |||
1251 | r = omap_dispc_register_isr(framedone_callback, NULL, | ||
1252 | DISPC_IRQ_FRAMEDONE); | ||
1253 | if (r) { | ||
1254 | DSSERR("can't get FRAMEDONE irq\n"); | ||
1255 | goto err1; | ||
1256 | } | ||
1257 | |||
1258 | dispc_set_lcd_display_type(OMAP_DSS_LCD_DISPLAY_TFT); | ||
1259 | |||
1260 | dispc_set_parallel_interface_mode(OMAP_DSS_PARALLELMODE_RFBI); | ||
1261 | |||
1262 | dispc_set_tft_data_lines(dssdev->ctrl.pixel_size); | ||
1263 | |||
1264 | rfbi_configure(dssdev->phy.rfbi.channel, | ||
1265 | dssdev->ctrl.pixel_size, | ||
1266 | dssdev->phy.rfbi.data_lines); | ||
1267 | |||
1268 | rfbi_set_timings(dssdev->phy.rfbi.channel, | ||
1269 | &dssdev->ctrl.rfbi_timings); | ||
1270 | |||
1271 | |||
1272 | if (dssdev->driver->enable) { | ||
1273 | r = dssdev->driver->enable(dssdev); | ||
1274 | if (r) | ||
1275 | goto err2; | ||
1276 | } | ||
1277 | |||
1278 | return 0; | ||
1279 | err2: | ||
1280 | omap_dispc_unregister_isr(framedone_callback, NULL, | ||
1281 | DISPC_IRQ_FRAMEDONE); | ||
1282 | err1: | ||
1283 | omap_dss_stop_device(dssdev); | ||
1284 | err0: | ||
1285 | return r; | ||
1286 | } | ||
1287 | |||
1288 | static void rfbi_display_disable(struct omap_dss_device *dssdev) | ||
1289 | { | ||
1290 | dssdev->driver->disable(dssdev); | ||
1291 | omap_dispc_unregister_isr(framedone_callback, NULL, | ||
1292 | DISPC_IRQ_FRAMEDONE); | ||
1293 | omap_dss_stop_device(dssdev); | ||
1294 | } | ||
1295 | |||
1296 | int rfbi_init_display(struct omap_dss_device *dssdev) | ||
1297 | { | ||
1298 | dssdev->enable = rfbi_display_enable; | ||
1299 | dssdev->disable = rfbi_display_disable; | ||
1300 | dssdev->update = rfbi_display_update; | ||
1301 | dssdev->sync = rfbi_display_sync; | ||
1302 | dssdev->enable_te = rfbi_display_enable_te; | ||
1303 | |||
1304 | rfbi.dssdev[dssdev->phy.rfbi.channel] = dssdev; | ||
1305 | |||
1306 | dssdev->caps = OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE; | ||
1307 | |||
1308 | return 0; | ||
1309 | } | ||
diff --git a/drivers/video/omap2/dss/sdi.c b/drivers/video/omap2/dss/sdi.c new file mode 100644 index 000000000000..c24f307d3da1 --- /dev/null +++ b/drivers/video/omap2/dss/sdi.c | |||
@@ -0,0 +1,277 @@ | |||
1 | /* | ||
2 | * linux/drivers/video/omap2/dss/sdi.c | ||
3 | * | ||
4 | * Copyright (C) 2009 Nokia Corporation | ||
5 | * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> | ||
6 | * | ||
7 | * This program is free software; you can redistribute it and/or modify it | ||
8 | * under the terms of the GNU General Public License version 2 as published by | ||
9 | * the Free Software Foundation. | ||
10 | * | ||
11 | * This program is distributed in the hope that it will be useful, but WITHOUT | ||
12 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | ||
13 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for | ||
14 | * more details. | ||
15 | * | ||
16 | * You should have received a copy of the GNU General Public License along with | ||
17 | * this program. If not, see <http://www.gnu.org/licenses/>. | ||
18 | */ | ||
19 | |||
20 | #define DSS_SUBSYS_NAME "SDI" | ||
21 | |||
22 | #include <linux/kernel.h> | ||
23 | #include <linux/clk.h> | ||
24 | #include <linux/delay.h> | ||
25 | #include <linux/err.h> | ||
26 | |||
27 | #include <plat/display.h> | ||
28 | #include "dss.h" | ||
29 | |||
30 | static struct { | ||
31 | bool skip_init; | ||
32 | bool update_enabled; | ||
33 | } sdi; | ||
34 | |||
35 | static void sdi_basic_init(void) | ||
36 | { | ||
37 | dispc_set_parallel_interface_mode(OMAP_DSS_PARALLELMODE_BYPASS); | ||
38 | |||
39 | dispc_set_lcd_display_type(OMAP_DSS_LCD_DISPLAY_TFT); | ||
40 | dispc_set_tft_data_lines(24); | ||
41 | dispc_lcd_enable_signal_polarity(1); | ||
42 | } | ||
43 | |||
44 | static int sdi_display_enable(struct omap_dss_device *dssdev) | ||
45 | { | ||
46 | struct omap_video_timings *t = &dssdev->panel.timings; | ||
47 | struct dss_clock_info dss_cinfo; | ||
48 | struct dispc_clock_info dispc_cinfo; | ||
49 | u16 lck_div, pck_div; | ||
50 | unsigned long fck; | ||
51 | unsigned long pck; | ||
52 | int r; | ||
53 | |||
54 | r = omap_dss_start_device(dssdev); | ||
55 | if (r) { | ||
56 | DSSERR("failed to start device\n"); | ||
57 | goto err0; | ||
58 | } | ||
59 | |||
60 | if (dssdev->state != OMAP_DSS_DISPLAY_DISABLED) { | ||
61 | DSSERR("dssdev already enabled\n"); | ||
62 | r = -EINVAL; | ||
63 | goto err1; | ||
64 | } | ||
65 | |||
66 | /* In case of skip_init sdi_init has already enabled the clocks */ | ||
67 | if (!sdi.skip_init) | ||
68 | dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); | ||
69 | |||
70 | sdi_basic_init(); | ||
71 | |||
72 | /* 15.5.9.1.2 */ | ||
73 | dssdev->panel.config |= OMAP_DSS_LCD_RF | OMAP_DSS_LCD_ONOFF; | ||
74 | |||
75 | dispc_set_pol_freq(dssdev->panel.config, dssdev->panel.acbi, | ||
76 | dssdev->panel.acb); | ||
77 | |||
78 | if (!sdi.skip_init) { | ||
79 | r = dss_calc_clock_div(1, t->pixel_clock * 1000, | ||
80 | &dss_cinfo, &dispc_cinfo); | ||
81 | } else { | ||
82 | r = dss_get_clock_div(&dss_cinfo); | ||
83 | r = dispc_get_clock_div(&dispc_cinfo); | ||
84 | } | ||
85 | |||
86 | if (r) | ||
87 | goto err2; | ||
88 | |||
89 | fck = dss_cinfo.fck; | ||
90 | lck_div = dispc_cinfo.lck_div; | ||
91 | pck_div = dispc_cinfo.pck_div; | ||
92 | |||
93 | pck = fck / lck_div / pck_div / 1000; | ||
94 | |||
95 | if (pck != t->pixel_clock) { | ||
96 | DSSWARN("Could not find exact pixel clock. Requested %d kHz, " | ||
97 | "got %lu kHz\n", | ||
98 | t->pixel_clock, pck); | ||
99 | |||
100 | t->pixel_clock = pck; | ||
101 | } | ||
102 | |||
103 | |||
104 | dispc_set_lcd_timings(t); | ||
105 | |||
106 | r = dss_set_clock_div(&dss_cinfo); | ||
107 | if (r) | ||
108 | goto err2; | ||
109 | |||
110 | r = dispc_set_clock_div(&dispc_cinfo); | ||
111 | if (r) | ||
112 | goto err2; | ||
113 | |||
114 | if (!sdi.skip_init) { | ||
115 | dss_sdi_init(dssdev->phy.sdi.datapairs); | ||
116 | r = dss_sdi_enable(); | ||
117 | if (r) | ||
118 | goto err1; | ||
119 | mdelay(2); | ||
120 | } | ||
121 | |||
122 | dispc_enable_lcd_out(1); | ||
123 | |||
124 | if (dssdev->driver->enable) { | ||
125 | r = dssdev->driver->enable(dssdev); | ||
126 | if (r) | ||
127 | goto err3; | ||
128 | } | ||
129 | |||
130 | dssdev->state = OMAP_DSS_DISPLAY_ACTIVE; | ||
131 | |||
132 | sdi.skip_init = 0; | ||
133 | |||
134 | return 0; | ||
135 | err3: | ||
136 | dispc_enable_lcd_out(0); | ||
137 | err2: | ||
138 | dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); | ||
139 | err1: | ||
140 | omap_dss_stop_device(dssdev); | ||
141 | err0: | ||
142 | return r; | ||
143 | } | ||
144 | |||
145 | static int sdi_display_resume(struct omap_dss_device *dssdev); | ||
146 | |||
147 | static void sdi_display_disable(struct omap_dss_device *dssdev) | ||
148 | { | ||
149 | if (dssdev->state == OMAP_DSS_DISPLAY_DISABLED) | ||
150 | return; | ||
151 | |||
152 | if (dssdev->state == OMAP_DSS_DISPLAY_SUSPENDED) | ||
153 | if (sdi_display_resume(dssdev)) | ||
154 | return; | ||
155 | |||
156 | if (dssdev->driver->disable) | ||
157 | dssdev->driver->disable(dssdev); | ||
158 | |||
159 | dispc_enable_lcd_out(0); | ||
160 | |||
161 | dss_sdi_disable(); | ||
162 | |||
163 | dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); | ||
164 | |||
165 | dssdev->state = OMAP_DSS_DISPLAY_DISABLED; | ||
166 | |||
167 | omap_dss_stop_device(dssdev); | ||
168 | } | ||
169 | |||
170 | static int sdi_display_suspend(struct omap_dss_device *dssdev) | ||
171 | { | ||
172 | if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE) | ||
173 | return -EINVAL; | ||
174 | |||
175 | if (dssdev->driver->suspend) | ||
176 | dssdev->driver->suspend(dssdev); | ||
177 | |||
178 | dispc_enable_lcd_out(0); | ||
179 | |||
180 | dss_sdi_disable(); | ||
181 | |||
182 | dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); | ||
183 | |||
184 | dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED; | ||
185 | |||
186 | return 0; | ||
187 | } | ||
188 | |||
189 | static int sdi_display_resume(struct omap_dss_device *dssdev) | ||
190 | { | ||
191 | int r; | ||
192 | |||
193 | if (dssdev->state != OMAP_DSS_DISPLAY_SUSPENDED) | ||
194 | return -EINVAL; | ||
195 | |||
196 | dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); | ||
197 | |||
198 | r = dss_sdi_enable(); | ||
199 | if (r) | ||
200 | goto err; | ||
201 | mdelay(2); | ||
202 | |||
203 | dispc_enable_lcd_out(1); | ||
204 | |||
205 | if (dssdev->driver->resume) | ||
206 | dssdev->driver->resume(dssdev); | ||
207 | |||
208 | dssdev->state = OMAP_DSS_DISPLAY_ACTIVE; | ||
209 | |||
210 | return 0; | ||
211 | err: | ||
212 | dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); | ||
213 | return r; | ||
214 | } | ||
215 | |||
216 | static int sdi_display_set_update_mode(struct omap_dss_device *dssdev, | ||
217 | enum omap_dss_update_mode mode) | ||
218 | { | ||
219 | if (mode == OMAP_DSS_UPDATE_MANUAL) | ||
220 | return -EINVAL; | ||
221 | |||
222 | if (mode == OMAP_DSS_UPDATE_DISABLED) { | ||
223 | dispc_enable_lcd_out(0); | ||
224 | sdi.update_enabled = 0; | ||
225 | } else { | ||
226 | dispc_enable_lcd_out(1); | ||
227 | sdi.update_enabled = 1; | ||
228 | } | ||
229 | |||
230 | return 0; | ||
231 | } | ||
232 | |||
233 | static enum omap_dss_update_mode sdi_display_get_update_mode( | ||
234 | struct omap_dss_device *dssdev) | ||
235 | { | ||
236 | return sdi.update_enabled ? OMAP_DSS_UPDATE_AUTO : | ||
237 | OMAP_DSS_UPDATE_DISABLED; | ||
238 | } | ||
239 | |||
240 | static void sdi_get_timings(struct omap_dss_device *dssdev, | ||
241 | struct omap_video_timings *timings) | ||
242 | { | ||
243 | *timings = dssdev->panel.timings; | ||
244 | } | ||
245 | |||
246 | int sdi_init_display(struct omap_dss_device *dssdev) | ||
247 | { | ||
248 | DSSDBG("SDI init\n"); | ||
249 | |||
250 | dssdev->enable = sdi_display_enable; | ||
251 | dssdev->disable = sdi_display_disable; | ||
252 | dssdev->suspend = sdi_display_suspend; | ||
253 | dssdev->resume = sdi_display_resume; | ||
254 | dssdev->set_update_mode = sdi_display_set_update_mode; | ||
255 | dssdev->get_update_mode = sdi_display_get_update_mode; | ||
256 | dssdev->get_timings = sdi_get_timings; | ||
257 | |||
258 | return 0; | ||
259 | } | ||
260 | |||
261 | int sdi_init(bool skip_init) | ||
262 | { | ||
263 | /* we store this for first display enable, then clear it */ | ||
264 | sdi.skip_init = skip_init; | ||
265 | |||
266 | /* | ||
267 | * Enable clocks already here, otherwise there would be a toggle | ||
268 | * of them until sdi_display_enable is called. | ||
269 | */ | ||
270 | if (skip_init) | ||
271 | dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); | ||
272 | return 0; | ||
273 | } | ||
274 | |||
275 | void sdi_exit(void) | ||
276 | { | ||
277 | } | ||
diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c new file mode 100644 index 000000000000..749a5a0f5be4 --- /dev/null +++ b/drivers/video/omap2/dss/venc.c | |||
@@ -0,0 +1,797 @@ | |||
1 | /* | ||
2 | * linux/drivers/video/omap2/dss/venc.c | ||
3 | * | ||
4 | * Copyright (C) 2009 Nokia Corporation | ||
5 | * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> | ||
6 | * | ||
7 | * VENC settings from TI's DSS driver | ||
8 | * | ||
9 | * This program is free software; you can redistribute it and/or modify it | ||
10 | * under the terms of the GNU General Public License version 2 as published by | ||
11 | * the Free Software Foundation. | ||
12 | * | ||
13 | * This program is distributed in the hope that it will be useful, but WITHOUT | ||
14 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | ||
15 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for | ||
16 | * more details. | ||
17 | * | ||
18 | * You should have received a copy of the GNU General Public License along with | ||
19 | * this program. If not, see <http://www.gnu.org/licenses/>. | ||
20 | */ | ||
21 | |||
22 | #define DSS_SUBSYS_NAME "VENC" | ||
23 | |||
24 | #include <linux/kernel.h> | ||
25 | #include <linux/module.h> | ||
26 | #include <linux/clk.h> | ||
27 | #include <linux/err.h> | ||
28 | #include <linux/io.h> | ||
29 | #include <linux/mutex.h> | ||
30 | #include <linux/completion.h> | ||
31 | #include <linux/delay.h> | ||
32 | #include <linux/string.h> | ||
33 | #include <linux/seq_file.h> | ||
34 | #include <linux/platform_device.h> | ||
35 | #include <linux/regulator/consumer.h> | ||
36 | |||
37 | #include <plat/display.h> | ||
38 | #include <plat/cpu.h> | ||
39 | |||
40 | #include "dss.h" | ||
41 | |||
42 | #define VENC_BASE 0x48050C00 | ||
43 | |||
44 | /* Venc registers */ | ||
45 | #define VENC_REV_ID 0x00 | ||
46 | #define VENC_STATUS 0x04 | ||
47 | #define VENC_F_CONTROL 0x08 | ||
48 | #define VENC_VIDOUT_CTRL 0x10 | ||
49 | #define VENC_SYNC_CTRL 0x14 | ||
50 | #define VENC_LLEN 0x1C | ||
51 | #define VENC_FLENS 0x20 | ||
52 | #define VENC_HFLTR_CTRL 0x24 | ||
53 | #define VENC_CC_CARR_WSS_CARR 0x28 | ||
54 | #define VENC_C_PHASE 0x2C | ||
55 | #define VENC_GAIN_U 0x30 | ||
56 | #define VENC_GAIN_V 0x34 | ||
57 | #define VENC_GAIN_Y 0x38 | ||
58 | #define VENC_BLACK_LEVEL 0x3C | ||
59 | #define VENC_BLANK_LEVEL 0x40 | ||
60 | #define VENC_X_COLOR 0x44 | ||
61 | #define VENC_M_CONTROL 0x48 | ||
62 | #define VENC_BSTAMP_WSS_DATA 0x4C | ||
63 | #define VENC_S_CARR 0x50 | ||
64 | #define VENC_LINE21 0x54 | ||
65 | #define VENC_LN_SEL 0x58 | ||
66 | #define VENC_L21__WC_CTL 0x5C | ||
67 | #define VENC_HTRIGGER_VTRIGGER 0x60 | ||
68 | #define VENC_SAVID__EAVID 0x64 | ||
69 | #define VENC_FLEN__FAL 0x68 | ||
70 | #define VENC_LAL__PHASE_RESET 0x6C | ||
71 | #define VENC_HS_INT_START_STOP_X 0x70 | ||
72 | #define VENC_HS_EXT_START_STOP_X 0x74 | ||
73 | #define VENC_VS_INT_START_X 0x78 | ||
74 | #define VENC_VS_INT_STOP_X__VS_INT_START_Y 0x7C | ||
75 | #define VENC_VS_INT_STOP_Y__VS_EXT_START_X 0x80 | ||
76 | #define VENC_VS_EXT_STOP_X__VS_EXT_START_Y 0x84 | ||
77 | #define VENC_VS_EXT_STOP_Y 0x88 | ||
78 | #define VENC_AVID_START_STOP_X 0x90 | ||
79 | #define VENC_AVID_START_STOP_Y 0x94 | ||
80 | #define VENC_FID_INT_START_X__FID_INT_START_Y 0xA0 | ||
81 | #define VENC_FID_INT_OFFSET_Y__FID_EXT_START_X 0xA4 | ||
82 | #define VENC_FID_EXT_START_Y__FID_EXT_OFFSET_Y 0xA8 | ||
83 | #define VENC_TVDETGP_INT_START_STOP_X 0xB0 | ||
84 | #define VENC_TVDETGP_INT_START_STOP_Y 0xB4 | ||
85 | #define VENC_GEN_CTRL 0xB8 | ||
86 | #define VENC_OUTPUT_CONTROL 0xC4 | ||
87 | #define VENC_OUTPUT_TEST 0xC8 | ||
88 | #define VENC_DAC_B__DAC_C 0xC8 | ||
89 | |||
90 | struct venc_config { | ||
91 | u32 f_control; | ||
92 | u32 vidout_ctrl; | ||
93 | u32 sync_ctrl; | ||
94 | u32 llen; | ||
95 | u32 flens; | ||
96 | u32 hfltr_ctrl; | ||
97 | u32 cc_carr_wss_carr; | ||
98 | u32 c_phase; | ||
99 | u32 gain_u; | ||
100 | u32 gain_v; | ||
101 | u32 gain_y; | ||
102 | u32 black_level; | ||
103 | u32 blank_level; | ||
104 | u32 x_color; | ||
105 | u32 m_control; | ||
106 | u32 bstamp_wss_data; | ||
107 | u32 s_carr; | ||
108 | u32 line21; | ||
109 | u32 ln_sel; | ||
110 | u32 l21__wc_ctl; | ||
111 | u32 htrigger_vtrigger; | ||
112 | u32 savid__eavid; | ||
113 | u32 flen__fal; | ||
114 | u32 lal__phase_reset; | ||
115 | u32 hs_int_start_stop_x; | ||
116 | u32 hs_ext_start_stop_x; | ||
117 | u32 vs_int_start_x; | ||
118 | u32 vs_int_stop_x__vs_int_start_y; | ||
119 | u32 vs_int_stop_y__vs_ext_start_x; | ||
120 | u32 vs_ext_stop_x__vs_ext_start_y; | ||
121 | u32 vs_ext_stop_y; | ||
122 | u32 avid_start_stop_x; | ||
123 | u32 avid_start_stop_y; | ||
124 | u32 fid_int_start_x__fid_int_start_y; | ||
125 | u32 fid_int_offset_y__fid_ext_start_x; | ||
126 | u32 fid_ext_start_y__fid_ext_offset_y; | ||
127 | u32 tvdetgp_int_start_stop_x; | ||
128 | u32 tvdetgp_int_start_stop_y; | ||
129 | u32 gen_ctrl; | ||
130 | }; | ||
131 | |||
132 | /* from TRM */ | ||
133 | static const struct venc_config venc_config_pal_trm = { | ||
134 | .f_control = 0, | ||
135 | .vidout_ctrl = 1, | ||
136 | .sync_ctrl = 0x40, | ||
137 | .llen = 0x35F, /* 863 */ | ||
138 | .flens = 0x270, /* 624 */ | ||
139 | .hfltr_ctrl = 0, | ||
140 | .cc_carr_wss_carr = 0x2F7225ED, | ||
141 | .c_phase = 0, | ||
142 | .gain_u = 0x111, | ||
143 | .gain_v = 0x181, | ||
144 | .gain_y = 0x140, | ||
145 | .black_level = 0x3B, | ||
146 | .blank_level = 0x3B, | ||
147 | .x_color = 0x7, | ||
148 | .m_control = 0x2, | ||
149 | .bstamp_wss_data = 0x3F, | ||
150 | .s_carr = 0x2A098ACB, | ||
151 | .line21 = 0, | ||
152 | .ln_sel = 0x01290015, | ||
153 | .l21__wc_ctl = 0x0000F603, | ||
154 | .htrigger_vtrigger = 0, | ||
155 | |||
156 | .savid__eavid = 0x06A70108, | ||
157 | .flen__fal = 0x00180270, | ||
158 | .lal__phase_reset = 0x00040135, | ||
159 | .hs_int_start_stop_x = 0x00880358, | ||
160 | .hs_ext_start_stop_x = 0x000F035F, | ||
161 | .vs_int_start_x = 0x01A70000, | ||
162 | .vs_int_stop_x__vs_int_start_y = 0x000001A7, | ||
163 | .vs_int_stop_y__vs_ext_start_x = 0x01AF0000, | ||
164 | .vs_ext_stop_x__vs_ext_start_y = 0x000101AF, | ||
165 | .vs_ext_stop_y = 0x00000025, | ||
166 | .avid_start_stop_x = 0x03530083, | ||
167 | .avid_start_stop_y = 0x026C002E, | ||
168 | .fid_int_start_x__fid_int_start_y = 0x0001008A, | ||
169 | .fid_int_offset_y__fid_ext_start_x = 0x002E0138, | ||
170 | .fid_ext_start_y__fid_ext_offset_y = 0x01380001, | ||
171 | |||
172 | .tvdetgp_int_start_stop_x = 0x00140001, | ||
173 | .tvdetgp_int_start_stop_y = 0x00010001, | ||
174 | .gen_ctrl = 0x00FF0000, | ||
175 | }; | ||
176 | |||
177 | /* from TRM */ | ||
178 | static const struct venc_config venc_config_ntsc_trm = { | ||
179 | .f_control = 0, | ||
180 | .vidout_ctrl = 1, | ||
181 | .sync_ctrl = 0x8040, | ||
182 | .llen = 0x359, | ||
183 | .flens = 0x20C, | ||
184 | .hfltr_ctrl = 0, | ||
185 | .cc_carr_wss_carr = 0x043F2631, | ||
186 | .c_phase = 0, | ||
187 | .gain_u = 0x102, | ||
188 | .gain_v = 0x16C, | ||
189 | .gain_y = 0x12F, | ||
190 | .black_level = 0x43, | ||
191 | .blank_level = 0x38, | ||
192 | .x_color = 0x7, | ||
193 | .m_control = 0x1, | ||
194 | .bstamp_wss_data = 0x38, | ||
195 | .s_carr = 0x21F07C1F, | ||
196 | .line21 = 0, | ||
197 | .ln_sel = 0x01310011, | ||
198 | .l21__wc_ctl = 0x0000F003, | ||
199 | .htrigger_vtrigger = 0, | ||
200 | |||
201 | .savid__eavid = 0x069300F4, | ||
202 | .flen__fal = 0x0016020C, | ||
203 | .lal__phase_reset = 0x00060107, | ||
204 | .hs_int_start_stop_x = 0x008E0350, | ||
205 | .hs_ext_start_stop_x = 0x000F0359, | ||
206 | .vs_int_start_x = 0x01A00000, | ||
207 | .vs_int_stop_x__vs_int_start_y = 0x020701A0, | ||
208 | .vs_int_stop_y__vs_ext_start_x = 0x01AC0024, | ||
209 | .vs_ext_stop_x__vs_ext_start_y = 0x020D01AC, | ||
210 | .vs_ext_stop_y = 0x00000006, | ||
211 | .avid_start_stop_x = 0x03480078, | ||
212 | .avid_start_stop_y = 0x02060024, | ||
213 | .fid_int_start_x__fid_int_start_y = 0x0001008A, | ||
214 | .fid_int_offset_y__fid_ext_start_x = 0x01AC0106, | ||
215 | .fid_ext_start_y__fid_ext_offset_y = 0x01060006, | ||
216 | |||
217 | .tvdetgp_int_start_stop_x = 0x00140001, | ||
218 | .tvdetgp_int_start_stop_y = 0x00010001, | ||
219 | .gen_ctrl = 0x00F90000, | ||
220 | }; | ||
221 | |||
222 | static const struct venc_config venc_config_pal_bdghi = { | ||
223 | .f_control = 0, | ||
224 | .vidout_ctrl = 0, | ||
225 | .sync_ctrl = 0, | ||
226 | .hfltr_ctrl = 0, | ||
227 | .x_color = 0, | ||
228 | .line21 = 0, | ||
229 | .ln_sel = 21, | ||
230 | .htrigger_vtrigger = 0, | ||
231 | .tvdetgp_int_start_stop_x = 0x00140001, | ||
232 | .tvdetgp_int_start_stop_y = 0x00010001, | ||
233 | .gen_ctrl = 0x00FB0000, | ||
234 | |||
235 | .llen = 864-1, | ||
236 | .flens = 625-1, | ||
237 | .cc_carr_wss_carr = 0x2F7625ED, | ||
238 | .c_phase = 0xDF, | ||
239 | .gain_u = 0x111, | ||
240 | .gain_v = 0x181, | ||
241 | .gain_y = 0x140, | ||
242 | .black_level = 0x3e, | ||
243 | .blank_level = 0x3e, | ||
244 | .m_control = 0<<2 | 1<<1, | ||
245 | .bstamp_wss_data = 0x42, | ||
246 | .s_carr = 0x2a098acb, | ||
247 | .l21__wc_ctl = 0<<13 | 0x16<<8 | 0<<0, | ||
248 | .savid__eavid = 0x06A70108, | ||
249 | .flen__fal = 23<<16 | 624<<0, | ||
250 | .lal__phase_reset = 2<<17 | 310<<0, | ||
251 | .hs_int_start_stop_x = 0x00920358, | ||
252 | .hs_ext_start_stop_x = 0x000F035F, | ||
253 | .vs_int_start_x = 0x1a7<<16, | ||
254 | .vs_int_stop_x__vs_int_start_y = 0x000601A7, | ||
255 | .vs_int_stop_y__vs_ext_start_x = 0x01AF0036, | ||
256 | .vs_ext_stop_x__vs_ext_start_y = 0x27101af, | ||
257 | .vs_ext_stop_y = 0x05, | ||
258 | .avid_start_stop_x = 0x03530082, | ||
259 | .avid_start_stop_y = 0x0270002E, | ||
260 | .fid_int_start_x__fid_int_start_y = 0x0005008A, | ||
261 | .fid_int_offset_y__fid_ext_start_x = 0x002E0138, | ||
262 | .fid_ext_start_y__fid_ext_offset_y = 0x01380005, | ||
263 | }; | ||
264 | |||
265 | const struct omap_video_timings omap_dss_pal_timings = { | ||
266 | .x_res = 720, | ||
267 | .y_res = 574, | ||
268 | .pixel_clock = 13500, | ||
269 | .hsw = 64, | ||
270 | .hfp = 12, | ||
271 | .hbp = 68, | ||
272 | .vsw = 5, | ||
273 | .vfp = 5, | ||
274 | .vbp = 41, | ||
275 | }; | ||
276 | EXPORT_SYMBOL(omap_dss_pal_timings); | ||
277 | |||
278 | const struct omap_video_timings omap_dss_ntsc_timings = { | ||
279 | .x_res = 720, | ||
280 | .y_res = 482, | ||
281 | .pixel_clock = 13500, | ||
282 | .hsw = 64, | ||
283 | .hfp = 16, | ||
284 | .hbp = 58, | ||
285 | .vsw = 6, | ||
286 | .vfp = 6, | ||
287 | .vbp = 31, | ||
288 | }; | ||
289 | EXPORT_SYMBOL(omap_dss_ntsc_timings); | ||
290 | |||
291 | static struct { | ||
292 | void __iomem *base; | ||
293 | struct mutex venc_lock; | ||
294 | u32 wss_data; | ||
295 | struct regulator *vdda_dac_reg; | ||
296 | } venc; | ||
297 | |||
298 | static inline void venc_write_reg(int idx, u32 val) | ||
299 | { | ||
300 | __raw_writel(val, venc.base + idx); | ||
301 | } | ||
302 | |||
303 | static inline u32 venc_read_reg(int idx) | ||
304 | { | ||
305 | u32 l = __raw_readl(venc.base + idx); | ||
306 | return l; | ||
307 | } | ||
308 | |||
309 | static void venc_write_config(const struct venc_config *config) | ||
310 | { | ||
311 | DSSDBG("write venc conf\n"); | ||
312 | |||
313 | venc_write_reg(VENC_LLEN, config->llen); | ||
314 | venc_write_reg(VENC_FLENS, config->flens); | ||
315 | venc_write_reg(VENC_CC_CARR_WSS_CARR, config->cc_carr_wss_carr); | ||
316 | venc_write_reg(VENC_C_PHASE, config->c_phase); | ||
317 | venc_write_reg(VENC_GAIN_U, config->gain_u); | ||
318 | venc_write_reg(VENC_GAIN_V, config->gain_v); | ||
319 | venc_write_reg(VENC_GAIN_Y, config->gain_y); | ||
320 | venc_write_reg(VENC_BLACK_LEVEL, config->black_level); | ||
321 | venc_write_reg(VENC_BLANK_LEVEL, config->blank_level); | ||
322 | venc_write_reg(VENC_M_CONTROL, config->m_control); | ||
323 | venc_write_reg(VENC_BSTAMP_WSS_DATA, config->bstamp_wss_data | | ||
324 | venc.wss_data); | ||
325 | venc_write_reg(VENC_S_CARR, config->s_carr); | ||
326 | venc_write_reg(VENC_L21__WC_CTL, config->l21__wc_ctl); | ||
327 | venc_write_reg(VENC_SAVID__EAVID, config->savid__eavid); | ||
328 | venc_write_reg(VENC_FLEN__FAL, config->flen__fal); | ||
329 | venc_write_reg(VENC_LAL__PHASE_RESET, config->lal__phase_reset); | ||
330 | venc_write_reg(VENC_HS_INT_START_STOP_X, config->hs_int_start_stop_x); | ||
331 | venc_write_reg(VENC_HS_EXT_START_STOP_X, config->hs_ext_start_stop_x); | ||
332 | venc_write_reg(VENC_VS_INT_START_X, config->vs_int_start_x); | ||
333 | venc_write_reg(VENC_VS_INT_STOP_X__VS_INT_START_Y, | ||
334 | config->vs_int_stop_x__vs_int_start_y); | ||
335 | venc_write_reg(VENC_VS_INT_STOP_Y__VS_EXT_START_X, | ||
336 | config->vs_int_stop_y__vs_ext_start_x); | ||
337 | venc_write_reg(VENC_VS_EXT_STOP_X__VS_EXT_START_Y, | ||
338 | config->vs_ext_stop_x__vs_ext_start_y); | ||
339 | venc_write_reg(VENC_VS_EXT_STOP_Y, config->vs_ext_stop_y); | ||
340 | venc_write_reg(VENC_AVID_START_STOP_X, config->avid_start_stop_x); | ||
341 | venc_write_reg(VENC_AVID_START_STOP_Y, config->avid_start_stop_y); | ||
342 | venc_write_reg(VENC_FID_INT_START_X__FID_INT_START_Y, | ||
343 | config->fid_int_start_x__fid_int_start_y); | ||
344 | venc_write_reg(VENC_FID_INT_OFFSET_Y__FID_EXT_START_X, | ||
345 | config->fid_int_offset_y__fid_ext_start_x); | ||
346 | venc_write_reg(VENC_FID_EXT_START_Y__FID_EXT_OFFSET_Y, | ||
347 | config->fid_ext_start_y__fid_ext_offset_y); | ||
348 | |||
349 | venc_write_reg(VENC_DAC_B__DAC_C, venc_read_reg(VENC_DAC_B__DAC_C)); | ||
350 | venc_write_reg(VENC_VIDOUT_CTRL, config->vidout_ctrl); | ||
351 | venc_write_reg(VENC_HFLTR_CTRL, config->hfltr_ctrl); | ||
352 | venc_write_reg(VENC_X_COLOR, config->x_color); | ||
353 | venc_write_reg(VENC_LINE21, config->line21); | ||
354 | venc_write_reg(VENC_LN_SEL, config->ln_sel); | ||
355 | venc_write_reg(VENC_HTRIGGER_VTRIGGER, config->htrigger_vtrigger); | ||
356 | venc_write_reg(VENC_TVDETGP_INT_START_STOP_X, | ||
357 | config->tvdetgp_int_start_stop_x); | ||
358 | venc_write_reg(VENC_TVDETGP_INT_START_STOP_Y, | ||
359 | config->tvdetgp_int_start_stop_y); | ||
360 | venc_write_reg(VENC_GEN_CTRL, config->gen_ctrl); | ||
361 | venc_write_reg(VENC_F_CONTROL, config->f_control); | ||
362 | venc_write_reg(VENC_SYNC_CTRL, config->sync_ctrl); | ||
363 | } | ||
364 | |||
365 | static void venc_reset(void) | ||
366 | { | ||
367 | int t = 1000; | ||
368 | |||
369 | venc_write_reg(VENC_F_CONTROL, 1<<8); | ||
370 | while (venc_read_reg(VENC_F_CONTROL) & (1<<8)) { | ||
371 | if (--t == 0) { | ||
372 | DSSERR("Failed to reset venc\n"); | ||
373 | return; | ||
374 | } | ||
375 | } | ||
376 | |||
377 | /* the magical sleep that makes things work */ | ||
378 | msleep(20); | ||
379 | } | ||
380 | |||
381 | static void venc_enable_clocks(int enable) | ||
382 | { | ||
383 | if (enable) | ||
384 | dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1 | DSS_CLK_54M | | ||
385 | DSS_CLK_96M); | ||
386 | else | ||
387 | dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1 | DSS_CLK_54M | | ||
388 | DSS_CLK_96M); | ||
389 | } | ||
390 | |||
391 | static const struct venc_config *venc_timings_to_config( | ||
392 | struct omap_video_timings *timings) | ||
393 | { | ||
394 | if (memcmp(&omap_dss_pal_timings, timings, sizeof(*timings)) == 0) | ||
395 | return &venc_config_pal_trm; | ||
396 | |||
397 | if (memcmp(&omap_dss_ntsc_timings, timings, sizeof(*timings)) == 0) | ||
398 | return &venc_config_ntsc_trm; | ||
399 | |||
400 | BUG(); | ||
401 | } | ||
402 | |||
403 | |||
404 | |||
405 | |||
406 | |||
407 | /* driver */ | ||
408 | static int venc_panel_probe(struct omap_dss_device *dssdev) | ||
409 | { | ||
410 | dssdev->panel.timings = omap_dss_pal_timings; | ||
411 | |||
412 | return 0; | ||
413 | } | ||
414 | |||
415 | static void venc_panel_remove(struct omap_dss_device *dssdev) | ||
416 | { | ||
417 | } | ||
418 | |||
419 | static int venc_panel_enable(struct omap_dss_device *dssdev) | ||
420 | { | ||
421 | int r = 0; | ||
422 | |||
423 | /* wait couple of vsyncs until enabling the LCD */ | ||
424 | msleep(50); | ||
425 | |||
426 | if (dssdev->platform_enable) | ||
427 | r = dssdev->platform_enable(dssdev); | ||
428 | |||
429 | return r; | ||
430 | } | ||
431 | |||
432 | static void venc_panel_disable(struct omap_dss_device *dssdev) | ||
433 | { | ||
434 | if (dssdev->platform_disable) | ||
435 | dssdev->platform_disable(dssdev); | ||
436 | |||
437 | /* wait at least 5 vsyncs after disabling the LCD */ | ||
438 | |||
439 | msleep(100); | ||
440 | } | ||
441 | |||
442 | static int venc_panel_suspend(struct omap_dss_device *dssdev) | ||
443 | { | ||
444 | venc_panel_disable(dssdev); | ||
445 | return 0; | ||
446 | } | ||
447 | |||
448 | static int venc_panel_resume(struct omap_dss_device *dssdev) | ||
449 | { | ||
450 | return venc_panel_enable(dssdev); | ||
451 | } | ||
452 | |||
453 | static struct omap_dss_driver venc_driver = { | ||
454 | .probe = venc_panel_probe, | ||
455 | .remove = venc_panel_remove, | ||
456 | |||
457 | .enable = venc_panel_enable, | ||
458 | .disable = venc_panel_disable, | ||
459 | .suspend = venc_panel_suspend, | ||
460 | .resume = venc_panel_resume, | ||
461 | |||
462 | .driver = { | ||
463 | .name = "venc", | ||
464 | .owner = THIS_MODULE, | ||
465 | }, | ||
466 | }; | ||
467 | /* driver end */ | ||
468 | |||
469 | |||
470 | |||
471 | int venc_init(struct platform_device *pdev) | ||
472 | { | ||
473 | u8 rev_id; | ||
474 | |||
475 | mutex_init(&venc.venc_lock); | ||
476 | |||
477 | venc.wss_data = 0; | ||
478 | |||
479 | venc.base = ioremap(VENC_BASE, SZ_1K); | ||
480 | if (!venc.base) { | ||
481 | DSSERR("can't ioremap VENC\n"); | ||
482 | return -ENOMEM; | ||
483 | } | ||
484 | |||
485 | venc.vdda_dac_reg = regulator_get(&pdev->dev, "vdda_dac"); | ||
486 | if (IS_ERR(venc.vdda_dac_reg)) { | ||
487 | iounmap(venc.base); | ||
488 | DSSERR("can't get VDDA_DAC regulator\n"); | ||
489 | return PTR_ERR(venc.vdda_dac_reg); | ||
490 | } | ||
491 | |||
492 | venc_enable_clocks(1); | ||
493 | |||
494 | rev_id = (u8)(venc_read_reg(VENC_REV_ID) & 0xff); | ||
495 | printk(KERN_INFO "OMAP VENC rev %d\n", rev_id); | ||
496 | |||
497 | venc_enable_clocks(0); | ||
498 | |||
499 | return omap_dss_register_driver(&venc_driver); | ||
500 | } | ||
501 | |||
502 | void venc_exit(void) | ||
503 | { | ||
504 | omap_dss_unregister_driver(&venc_driver); | ||
505 | |||
506 | regulator_put(venc.vdda_dac_reg); | ||
507 | |||
508 | iounmap(venc.base); | ||
509 | } | ||
510 | |||
511 | static void venc_power_on(struct omap_dss_device *dssdev) | ||
512 | { | ||
513 | u32 l; | ||
514 | |||
515 | venc_enable_clocks(1); | ||
516 | |||
517 | venc_reset(); | ||
518 | venc_write_config(venc_timings_to_config(&dssdev->panel.timings)); | ||
519 | |||
520 | dss_set_venc_output(dssdev->phy.venc.type); | ||
521 | dss_set_dac_pwrdn_bgz(1); | ||
522 | |||
523 | l = 0; | ||
524 | |||
525 | if (dssdev->phy.venc.type == OMAP_DSS_VENC_TYPE_COMPOSITE) | ||
526 | l |= 1 << 1; | ||
527 | else /* S-Video */ | ||
528 | l |= (1 << 0) | (1 << 2); | ||
529 | |||
530 | if (dssdev->phy.venc.invert_polarity == false) | ||
531 | l |= 1 << 3; | ||
532 | |||
533 | venc_write_reg(VENC_OUTPUT_CONTROL, l); | ||
534 | |||
535 | dispc_set_digit_size(dssdev->panel.timings.x_res, | ||
536 | dssdev->panel.timings.y_res/2); | ||
537 | |||
538 | regulator_enable(venc.vdda_dac_reg); | ||
539 | |||
540 | if (dssdev->platform_enable) | ||
541 | dssdev->platform_enable(dssdev); | ||
542 | |||
543 | dispc_enable_digit_out(1); | ||
544 | } | ||
545 | |||
546 | static void venc_power_off(struct omap_dss_device *dssdev) | ||
547 | { | ||
548 | venc_write_reg(VENC_OUTPUT_CONTROL, 0); | ||
549 | dss_set_dac_pwrdn_bgz(0); | ||
550 | |||
551 | dispc_enable_digit_out(0); | ||
552 | |||
553 | if (dssdev->platform_disable) | ||
554 | dssdev->platform_disable(dssdev); | ||
555 | |||
556 | regulator_disable(venc.vdda_dac_reg); | ||
557 | |||
558 | venc_enable_clocks(0); | ||
559 | } | ||
560 | |||
561 | static int venc_enable_display(struct omap_dss_device *dssdev) | ||
562 | { | ||
563 | int r = 0; | ||
564 | |||
565 | DSSDBG("venc_enable_display\n"); | ||
566 | |||
567 | mutex_lock(&venc.venc_lock); | ||
568 | |||
569 | if (dssdev->state != OMAP_DSS_DISPLAY_DISABLED) { | ||
570 | r = -EINVAL; | ||
571 | goto err; | ||
572 | } | ||
573 | |||
574 | venc_power_on(dssdev); | ||
575 | |||
576 | venc.wss_data = 0; | ||
577 | |||
578 | dssdev->state = OMAP_DSS_DISPLAY_ACTIVE; | ||
579 | err: | ||
580 | mutex_unlock(&venc.venc_lock); | ||
581 | |||
582 | return r; | ||
583 | } | ||
584 | |||
585 | static void venc_disable_display(struct omap_dss_device *dssdev) | ||
586 | { | ||
587 | DSSDBG("venc_disable_display\n"); | ||
588 | |||
589 | mutex_lock(&venc.venc_lock); | ||
590 | |||
591 | if (dssdev->state == OMAP_DSS_DISPLAY_DISABLED) | ||
592 | goto end; | ||
593 | |||
594 | if (dssdev->state == OMAP_DSS_DISPLAY_SUSPENDED) { | ||
595 | /* suspended is the same as disabled with venc */ | ||
596 | dssdev->state = OMAP_DSS_DISPLAY_DISABLED; | ||
597 | goto end; | ||
598 | } | ||
599 | |||
600 | venc_power_off(dssdev); | ||
601 | |||
602 | dssdev->state = OMAP_DSS_DISPLAY_DISABLED; | ||
603 | end: | ||
604 | mutex_unlock(&venc.venc_lock); | ||
605 | } | ||
606 | |||
607 | static int venc_display_suspend(struct omap_dss_device *dssdev) | ||
608 | { | ||
609 | int r = 0; | ||
610 | |||
611 | DSSDBG("venc_display_suspend\n"); | ||
612 | |||
613 | mutex_lock(&venc.venc_lock); | ||
614 | |||
615 | if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE) { | ||
616 | r = -EINVAL; | ||
617 | goto err; | ||
618 | } | ||
619 | |||
620 | venc_power_off(dssdev); | ||
621 | |||
622 | dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED; | ||
623 | err: | ||
624 | mutex_unlock(&venc.venc_lock); | ||
625 | |||
626 | return r; | ||
627 | } | ||
628 | |||
629 | static int venc_display_resume(struct omap_dss_device *dssdev) | ||
630 | { | ||
631 | int r = 0; | ||
632 | |||
633 | DSSDBG("venc_display_resume\n"); | ||
634 | |||
635 | mutex_lock(&venc.venc_lock); | ||
636 | |||
637 | if (dssdev->state != OMAP_DSS_DISPLAY_SUSPENDED) { | ||
638 | r = -EINVAL; | ||
639 | goto err; | ||
640 | } | ||
641 | |||
642 | venc_power_on(dssdev); | ||
643 | |||
644 | dssdev->state = OMAP_DSS_DISPLAY_ACTIVE; | ||
645 | err: | ||
646 | mutex_unlock(&venc.venc_lock); | ||
647 | |||
648 | return r; | ||
649 | } | ||
650 | |||
651 | static void venc_get_timings(struct omap_dss_device *dssdev, | ||
652 | struct omap_video_timings *timings) | ||
653 | { | ||
654 | *timings = dssdev->panel.timings; | ||
655 | } | ||
656 | |||
657 | static void venc_set_timings(struct omap_dss_device *dssdev, | ||
658 | struct omap_video_timings *timings) | ||
659 | { | ||
660 | DSSDBG("venc_set_timings\n"); | ||
661 | |||
662 | /* Reset WSS data when the TV standard changes. */ | ||
663 | if (memcmp(&dssdev->panel.timings, timings, sizeof(*timings))) | ||
664 | venc.wss_data = 0; | ||
665 | |||
666 | dssdev->panel.timings = *timings; | ||
667 | if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE) { | ||
668 | /* turn the venc off and on to get new timings to use */ | ||
669 | venc_disable_display(dssdev); | ||
670 | venc_enable_display(dssdev); | ||
671 | } | ||
672 | } | ||
673 | |||
674 | static int venc_check_timings(struct omap_dss_device *dssdev, | ||
675 | struct omap_video_timings *timings) | ||
676 | { | ||
677 | DSSDBG("venc_check_timings\n"); | ||
678 | |||
679 | if (memcmp(&omap_dss_pal_timings, timings, sizeof(*timings)) == 0) | ||
680 | return 0; | ||
681 | |||
682 | if (memcmp(&omap_dss_ntsc_timings, timings, sizeof(*timings)) == 0) | ||
683 | return 0; | ||
684 | |||
685 | return -EINVAL; | ||
686 | } | ||
687 | |||
688 | static u32 venc_get_wss(struct omap_dss_device *dssdev) | ||
689 | { | ||
690 | /* Invert due to VENC_L21_WC_CTL:INV=1 */ | ||
691 | return (venc.wss_data >> 8) ^ 0xfffff; | ||
692 | } | ||
693 | |||
694 | static int venc_set_wss(struct omap_dss_device *dssdev, u32 wss) | ||
695 | { | ||
696 | const struct venc_config *config; | ||
697 | |||
698 | DSSDBG("venc_set_wss\n"); | ||
699 | |||
700 | mutex_lock(&venc.venc_lock); | ||
701 | |||
702 | config = venc_timings_to_config(&dssdev->panel.timings); | ||
703 | |||
704 | /* Invert due to VENC_L21_WC_CTL:INV=1 */ | ||
705 | venc.wss_data = (wss ^ 0xfffff) << 8; | ||
706 | |||
707 | venc_enable_clocks(1); | ||
708 | |||
709 | venc_write_reg(VENC_BSTAMP_WSS_DATA, config->bstamp_wss_data | | ||
710 | venc.wss_data); | ||
711 | |||
712 | venc_enable_clocks(0); | ||
713 | |||
714 | mutex_unlock(&venc.venc_lock); | ||
715 | |||
716 | return 0; | ||
717 | } | ||
718 | |||
719 | static enum omap_dss_update_mode venc_display_get_update_mode( | ||
720 | struct omap_dss_device *dssdev) | ||
721 | { | ||
722 | if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE) | ||
723 | return OMAP_DSS_UPDATE_AUTO; | ||
724 | else | ||
725 | return OMAP_DSS_UPDATE_DISABLED; | ||
726 | } | ||
727 | |||
728 | int venc_init_display(struct omap_dss_device *dssdev) | ||
729 | { | ||
730 | DSSDBG("init_display\n"); | ||
731 | |||
732 | dssdev->enable = venc_enable_display; | ||
733 | dssdev->disable = venc_disable_display; | ||
734 | dssdev->suspend = venc_display_suspend; | ||
735 | dssdev->resume = venc_display_resume; | ||
736 | dssdev->get_timings = venc_get_timings; | ||
737 | dssdev->set_timings = venc_set_timings; | ||
738 | dssdev->check_timings = venc_check_timings; | ||
739 | dssdev->get_wss = venc_get_wss; | ||
740 | dssdev->set_wss = venc_set_wss; | ||
741 | dssdev->get_update_mode = venc_display_get_update_mode; | ||
742 | |||
743 | return 0; | ||
744 | } | ||
745 | |||
746 | void venc_dump_regs(struct seq_file *s) | ||
747 | { | ||
748 | #define DUMPREG(r) seq_printf(s, "%-35s %08x\n", #r, venc_read_reg(r)) | ||
749 | |||
750 | venc_enable_clocks(1); | ||
751 | |||
752 | DUMPREG(VENC_F_CONTROL); | ||
753 | DUMPREG(VENC_VIDOUT_CTRL); | ||
754 | DUMPREG(VENC_SYNC_CTRL); | ||
755 | DUMPREG(VENC_LLEN); | ||
756 | DUMPREG(VENC_FLENS); | ||
757 | DUMPREG(VENC_HFLTR_CTRL); | ||
758 | DUMPREG(VENC_CC_CARR_WSS_CARR); | ||
759 | DUMPREG(VENC_C_PHASE); | ||
760 | DUMPREG(VENC_GAIN_U); | ||
761 | DUMPREG(VENC_GAIN_V); | ||
762 | DUMPREG(VENC_GAIN_Y); | ||
763 | DUMPREG(VENC_BLACK_LEVEL); | ||
764 | DUMPREG(VENC_BLANK_LEVEL); | ||
765 | DUMPREG(VENC_X_COLOR); | ||
766 | DUMPREG(VENC_M_CONTROL); | ||
767 | DUMPREG(VENC_BSTAMP_WSS_DATA); | ||
768 | DUMPREG(VENC_S_CARR); | ||
769 | DUMPREG(VENC_LINE21); | ||
770 | DUMPREG(VENC_LN_SEL); | ||
771 | DUMPREG(VENC_L21__WC_CTL); | ||
772 | DUMPREG(VENC_HTRIGGER_VTRIGGER); | ||
773 | DUMPREG(VENC_SAVID__EAVID); | ||
774 | DUMPREG(VENC_FLEN__FAL); | ||
775 | DUMPREG(VENC_LAL__PHASE_RESET); | ||
776 | DUMPREG(VENC_HS_INT_START_STOP_X); | ||
777 | DUMPREG(VENC_HS_EXT_START_STOP_X); | ||
778 | DUMPREG(VENC_VS_INT_START_X); | ||
779 | DUMPREG(VENC_VS_INT_STOP_X__VS_INT_START_Y); | ||
780 | DUMPREG(VENC_VS_INT_STOP_Y__VS_EXT_START_X); | ||
781 | DUMPREG(VENC_VS_EXT_STOP_X__VS_EXT_START_Y); | ||
782 | DUMPREG(VENC_VS_EXT_STOP_Y); | ||
783 | DUMPREG(VENC_AVID_START_STOP_X); | ||
784 | DUMPREG(VENC_AVID_START_STOP_Y); | ||
785 | DUMPREG(VENC_FID_INT_START_X__FID_INT_START_Y); | ||
786 | DUMPREG(VENC_FID_INT_OFFSET_Y__FID_EXT_START_X); | ||
787 | DUMPREG(VENC_FID_EXT_START_Y__FID_EXT_OFFSET_Y); | ||
788 | DUMPREG(VENC_TVDETGP_INT_START_STOP_X); | ||
789 | DUMPREG(VENC_TVDETGP_INT_START_STOP_Y); | ||
790 | DUMPREG(VENC_GEN_CTRL); | ||
791 | DUMPREG(VENC_OUTPUT_CONTROL); | ||
792 | DUMPREG(VENC_OUTPUT_TEST); | ||
793 | |||
794 | venc_enable_clocks(0); | ||
795 | |||
796 | #undef DUMPREG | ||
797 | } | ||
diff --git a/drivers/video/omap2/omapfb/Kconfig b/drivers/video/omap2/omapfb/Kconfig new file mode 100644 index 000000000000..bb694cc52a50 --- /dev/null +++ b/drivers/video/omap2/omapfb/Kconfig | |||
@@ -0,0 +1,37 @@ | |||
1 | menuconfig FB_OMAP2 | ||
2 | tristate "OMAP2/3 frame buffer support (EXPERIMENTAL)" | ||
3 | depends on FB && OMAP2_DSS | ||
4 | |||
5 | select OMAP2_VRAM | ||
6 | select OMAP2_VRFB | ||
7 | select FB_CFB_FILLRECT | ||
8 | select FB_CFB_COPYAREA | ||
9 | select FB_CFB_IMAGEBLIT | ||
10 | help | ||
11 | Frame buffer driver for OMAP2/3 based boards. | ||
12 | |||
13 | config FB_OMAP2_DEBUG_SUPPORT | ||
14 | bool "Debug support for OMAP2/3 FB" | ||
15 | default y | ||
16 | depends on FB_OMAP2 | ||
17 | help | ||
18 | Support for debug output. You have to enable the actual printing | ||
19 | with debug module parameter. | ||
20 | |||
21 | config FB_OMAP2_FORCE_AUTO_UPDATE | ||
22 | bool "Force main display to automatic update mode" | ||
23 | depends on FB_OMAP2 | ||
24 | help | ||
25 | Forces main display to automatic update mode (if possible), | ||
26 | and also enables tearsync (if possible). By default | ||
27 | displays that support manual update are started in manual | ||
28 | update mode. | ||
29 | |||
30 | config FB_OMAP2_NUM_FBS | ||
31 | int "Number of framebuffers" | ||
32 | range 1 10 | ||
33 | default 3 | ||
34 | depends on FB_OMAP2 | ||
35 | help | ||
36 | Select the number of framebuffers created. OMAP2/3 has 3 overlays | ||
37 | so normally this would be 3. | ||
diff --git a/drivers/video/omap2/omapfb/Makefile b/drivers/video/omap2/omapfb/Makefile new file mode 100644 index 000000000000..51c2e00d9bf8 --- /dev/null +++ b/drivers/video/omap2/omapfb/Makefile | |||
@@ -0,0 +1,2 @@ | |||
1 | obj-$(CONFIG_FB_OMAP2) += omapfb.o | ||
2 | omapfb-y := omapfb-main.o omapfb-sysfs.o omapfb-ioctl.o | ||
diff --git a/drivers/video/omap2/omapfb/omapfb-ioctl.c b/drivers/video/omap2/omapfb/omapfb-ioctl.c new file mode 100644 index 000000000000..4c4bafdfaa43 --- /dev/null +++ b/drivers/video/omap2/omapfb/omapfb-ioctl.c | |||
@@ -0,0 +1,755 @@ | |||
1 | /* | ||
2 | * linux/drivers/video/omap2/omapfb-ioctl.c | ||
3 | * | ||
4 | * Copyright (C) 2008 Nokia Corporation | ||
5 | * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> | ||
6 | * | ||
7 | * Some code and ideas taken from drivers/video/omap/ driver | ||
8 | * by Imre Deak. | ||
9 | * | ||
10 | * This program is free software; you can redistribute it and/or modify it | ||
11 | * under the terms of the GNU General Public License version 2 as published by | ||
12 | * the Free Software Foundation. | ||
13 | * | ||
14 | * This program is distributed in the hope that it will be useful, but WITHOUT | ||
15 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | ||
16 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for | ||
17 | * more details. | ||
18 | * | ||
19 | * You should have received a copy of the GNU General Public License along with | ||
20 | * this program. If not, see <http://www.gnu.org/licenses/>. | ||
21 | */ | ||
22 | |||
23 | #include <linux/fb.h> | ||
24 | #include <linux/device.h> | ||
25 | #include <linux/uaccess.h> | ||
26 | #include <linux/platform_device.h> | ||
27 | #include <linux/mm.h> | ||
28 | #include <linux/omapfb.h> | ||
29 | #include <linux/vmalloc.h> | ||
30 | |||
31 | #include <plat/display.h> | ||
32 | #include <plat/vrfb.h> | ||
33 | #include <plat/vram.h> | ||
34 | |||
35 | #include "omapfb.h" | ||
36 | |||
37 | static int omapfb_setup_plane(struct fb_info *fbi, struct omapfb_plane_info *pi) | ||
38 | { | ||
39 | struct omapfb_info *ofbi = FB2OFB(fbi); | ||
40 | struct omapfb2_device *fbdev = ofbi->fbdev; | ||
41 | struct omap_overlay *ovl; | ||
42 | struct omap_overlay_info info; | ||
43 | int r = 0; | ||
44 | |||
45 | DBG("omapfb_setup_plane\n"); | ||
46 | |||
47 | if (ofbi->num_overlays != 1) { | ||
48 | r = -EINVAL; | ||
49 | goto out; | ||
50 | } | ||
51 | |||
52 | /* XXX uses only the first overlay */ | ||
53 | ovl = ofbi->overlays[0]; | ||
54 | |||
55 | if (pi->enabled && !ofbi->region.size) { | ||
56 | /* | ||
57 | * This plane's memory was freed, can't enable it | ||
58 | * until it's reallocated. | ||
59 | */ | ||
60 | r = -EINVAL; | ||
61 | goto out; | ||
62 | } | ||
63 | |||
64 | ovl->get_overlay_info(ovl, &info); | ||
65 | |||
66 | info.pos_x = pi->pos_x; | ||
67 | info.pos_y = pi->pos_y; | ||
68 | info.out_width = pi->out_width; | ||
69 | info.out_height = pi->out_height; | ||
70 | info.enabled = pi->enabled; | ||
71 | |||
72 | r = ovl->set_overlay_info(ovl, &info); | ||
73 | if (r) | ||
74 | goto out; | ||
75 | |||
76 | if (ovl->manager) { | ||
77 | r = ovl->manager->apply(ovl->manager); | ||
78 | if (r) | ||
79 | goto out; | ||
80 | } | ||
81 | |||
82 | out: | ||
83 | if (r) | ||
84 | dev_err(fbdev->dev, "setup_plane failed\n"); | ||
85 | return r; | ||
86 | } | ||
87 | |||
88 | static int omapfb_query_plane(struct fb_info *fbi, struct omapfb_plane_info *pi) | ||
89 | { | ||
90 | struct omapfb_info *ofbi = FB2OFB(fbi); | ||
91 | |||
92 | if (ofbi->num_overlays != 1) { | ||
93 | memset(pi, 0, sizeof(*pi)); | ||
94 | } else { | ||
95 | struct omap_overlay_info *ovli; | ||
96 | struct omap_overlay *ovl; | ||
97 | |||
98 | ovl = ofbi->overlays[0]; | ||
99 | ovli = &ovl->info; | ||
100 | |||
101 | pi->pos_x = ovli->pos_x; | ||
102 | pi->pos_y = ovli->pos_y; | ||
103 | pi->enabled = ovli->enabled; | ||
104 | pi->channel_out = 0; /* xxx */ | ||
105 | pi->mirror = 0; | ||
106 | pi->out_width = ovli->out_width; | ||
107 | pi->out_height = ovli->out_height; | ||
108 | } | ||
109 | |||
110 | return 0; | ||
111 | } | ||
112 | |||
113 | static int omapfb_setup_mem(struct fb_info *fbi, struct omapfb_mem_info *mi) | ||
114 | { | ||
115 | struct omapfb_info *ofbi = FB2OFB(fbi); | ||
116 | struct omapfb2_device *fbdev = ofbi->fbdev; | ||
117 | struct omapfb2_mem_region *rg; | ||
118 | int r, i; | ||
119 | size_t size; | ||
120 | |||
121 | if (mi->type > OMAPFB_MEMTYPE_MAX) | ||
122 | return -EINVAL; | ||
123 | |||
124 | size = PAGE_ALIGN(mi->size); | ||
125 | |||
126 | rg = &ofbi->region; | ||
127 | |||
128 | for (i = 0; i < ofbi->num_overlays; i++) { | ||
129 | if (ofbi->overlays[i]->info.enabled) | ||
130 | return -EBUSY; | ||
131 | } | ||
132 | |||
133 | if (rg->size != size || rg->type != mi->type) { | ||
134 | r = omapfb_realloc_fbmem(fbi, size, mi->type); | ||
135 | if (r) { | ||
136 | dev_err(fbdev->dev, "realloc fbmem failed\n"); | ||
137 | return r; | ||
138 | } | ||
139 | } | ||
140 | |||
141 | return 0; | ||
142 | } | ||
143 | |||
144 | static int omapfb_query_mem(struct fb_info *fbi, struct omapfb_mem_info *mi) | ||
145 | { | ||
146 | struct omapfb_info *ofbi = FB2OFB(fbi); | ||
147 | struct omapfb2_mem_region *rg; | ||
148 | |||
149 | rg = &ofbi->region; | ||
150 | memset(mi, 0, sizeof(*mi)); | ||
151 | |||
152 | mi->size = rg->size; | ||
153 | mi->type = rg->type; | ||
154 | |||
155 | return 0; | ||
156 | } | ||
157 | |||
158 | static int omapfb_update_window_nolock(struct fb_info *fbi, | ||
159 | u32 x, u32 y, u32 w, u32 h) | ||
160 | { | ||
161 | struct omap_dss_device *display = fb2display(fbi); | ||
162 | u16 dw, dh; | ||
163 | |||
164 | if (!display) | ||
165 | return 0; | ||
166 | |||
167 | if (w == 0 || h == 0) | ||
168 | return 0; | ||
169 | |||
170 | display->get_resolution(display, &dw, &dh); | ||
171 | |||
172 | if (x + w > dw || y + h > dh) | ||
173 | return -EINVAL; | ||
174 | |||
175 | return display->update(display, x, y, w, h); | ||
176 | } | ||
177 | |||
178 | /* This function is exported for SGX driver use */ | ||
179 | int omapfb_update_window(struct fb_info *fbi, | ||
180 | u32 x, u32 y, u32 w, u32 h) | ||
181 | { | ||
182 | struct omapfb_info *ofbi = FB2OFB(fbi); | ||
183 | struct omapfb2_device *fbdev = ofbi->fbdev; | ||
184 | int r; | ||
185 | |||
186 | omapfb_lock(fbdev); | ||
187 | lock_fb_info(fbi); | ||
188 | |||
189 | r = omapfb_update_window_nolock(fbi, x, y, w, h); | ||
190 | |||
191 | unlock_fb_info(fbi); | ||
192 | omapfb_unlock(fbdev); | ||
193 | |||
194 | return r; | ||
195 | } | ||
196 | EXPORT_SYMBOL(omapfb_update_window); | ||
197 | |||
198 | static int omapfb_set_update_mode(struct fb_info *fbi, | ||
199 | enum omapfb_update_mode mode) | ||
200 | { | ||
201 | struct omap_dss_device *display = fb2display(fbi); | ||
202 | enum omap_dss_update_mode um; | ||
203 | int r; | ||
204 | |||
205 | if (!display || !display->set_update_mode) | ||
206 | return -EINVAL; | ||
207 | |||
208 | switch (mode) { | ||
209 | case OMAPFB_UPDATE_DISABLED: | ||
210 | um = OMAP_DSS_UPDATE_DISABLED; | ||
211 | break; | ||
212 | |||
213 | case OMAPFB_AUTO_UPDATE: | ||
214 | um = OMAP_DSS_UPDATE_AUTO; | ||
215 | break; | ||
216 | |||
217 | case OMAPFB_MANUAL_UPDATE: | ||
218 | um = OMAP_DSS_UPDATE_MANUAL; | ||
219 | break; | ||
220 | |||
221 | default: | ||
222 | return -EINVAL; | ||
223 | } | ||
224 | |||
225 | r = display->set_update_mode(display, um); | ||
226 | |||
227 | return r; | ||
228 | } | ||
229 | |||
230 | static int omapfb_get_update_mode(struct fb_info *fbi, | ||
231 | enum omapfb_update_mode *mode) | ||
232 | { | ||
233 | struct omap_dss_device *display = fb2display(fbi); | ||
234 | enum omap_dss_update_mode m; | ||
235 | |||
236 | if (!display || !display->get_update_mode) | ||
237 | return -EINVAL; | ||
238 | |||
239 | m = display->get_update_mode(display); | ||
240 | |||
241 | switch (m) { | ||
242 | case OMAP_DSS_UPDATE_DISABLED: | ||
243 | *mode = OMAPFB_UPDATE_DISABLED; | ||
244 | break; | ||
245 | case OMAP_DSS_UPDATE_AUTO: | ||
246 | *mode = OMAPFB_AUTO_UPDATE; | ||
247 | break; | ||
248 | case OMAP_DSS_UPDATE_MANUAL: | ||
249 | *mode = OMAPFB_MANUAL_UPDATE; | ||
250 | break; | ||
251 | default: | ||
252 | BUG(); | ||
253 | } | ||
254 | |||
255 | return 0; | ||
256 | } | ||
257 | |||
258 | /* XXX this color key handling is a hack... */ | ||
259 | static struct omapfb_color_key omapfb_color_keys[2]; | ||
260 | |||
261 | static int _omapfb_set_color_key(struct omap_overlay_manager *mgr, | ||
262 | struct omapfb_color_key *ck) | ||
263 | { | ||
264 | struct omap_overlay_manager_info info; | ||
265 | enum omap_dss_trans_key_type kt; | ||
266 | int r; | ||
267 | |||
268 | mgr->get_manager_info(mgr, &info); | ||
269 | |||
270 | if (ck->key_type == OMAPFB_COLOR_KEY_DISABLED) { | ||
271 | info.trans_enabled = false; | ||
272 | omapfb_color_keys[mgr->id] = *ck; | ||
273 | |||
274 | r = mgr->set_manager_info(mgr, &info); | ||
275 | if (r) | ||
276 | return r; | ||
277 | |||
278 | r = mgr->apply(mgr); | ||
279 | |||
280 | return r; | ||
281 | } | ||
282 | |||
283 | switch (ck->key_type) { | ||
284 | case OMAPFB_COLOR_KEY_GFX_DST: | ||
285 | kt = OMAP_DSS_COLOR_KEY_GFX_DST; | ||
286 | break; | ||
287 | case OMAPFB_COLOR_KEY_VID_SRC: | ||
288 | kt = OMAP_DSS_COLOR_KEY_VID_SRC; | ||
289 | break; | ||
290 | default: | ||
291 | return -EINVAL; | ||
292 | } | ||
293 | |||
294 | info.default_color = ck->background; | ||
295 | info.trans_key = ck->trans_key; | ||
296 | info.trans_key_type = kt; | ||
297 | info.trans_enabled = true; | ||
298 | |||
299 | omapfb_color_keys[mgr->id] = *ck; | ||
300 | |||
301 | r = mgr->set_manager_info(mgr, &info); | ||
302 | if (r) | ||
303 | return r; | ||
304 | |||
305 | r = mgr->apply(mgr); | ||
306 | |||
307 | return r; | ||
308 | } | ||
309 | |||
310 | static int omapfb_set_color_key(struct fb_info *fbi, | ||
311 | struct omapfb_color_key *ck) | ||
312 | { | ||
313 | struct omapfb_info *ofbi = FB2OFB(fbi); | ||
314 | struct omapfb2_device *fbdev = ofbi->fbdev; | ||
315 | int r; | ||
316 | int i; | ||
317 | struct omap_overlay_manager *mgr = NULL; | ||
318 | |||
319 | omapfb_lock(fbdev); | ||
320 | |||
321 | for (i = 0; i < ofbi->num_overlays; i++) { | ||
322 | if (ofbi->overlays[i]->manager) { | ||
323 | mgr = ofbi->overlays[i]->manager; | ||
324 | break; | ||
325 | } | ||
326 | } | ||
327 | |||
328 | if (!mgr) { | ||
329 | r = -EINVAL; | ||
330 | goto err; | ||
331 | } | ||
332 | |||
333 | r = _omapfb_set_color_key(mgr, ck); | ||
334 | err: | ||
335 | omapfb_unlock(fbdev); | ||
336 | |||
337 | return r; | ||
338 | } | ||
339 | |||
340 | static int omapfb_get_color_key(struct fb_info *fbi, | ||
341 | struct omapfb_color_key *ck) | ||
342 | { | ||
343 | struct omapfb_info *ofbi = FB2OFB(fbi); | ||
344 | struct omapfb2_device *fbdev = ofbi->fbdev; | ||
345 | struct omap_overlay_manager *mgr = NULL; | ||
346 | int r = 0; | ||
347 | int i; | ||
348 | |||
349 | omapfb_lock(fbdev); | ||
350 | |||
351 | for (i = 0; i < ofbi->num_overlays; i++) { | ||
352 | if (ofbi->overlays[i]->manager) { | ||
353 | mgr = ofbi->overlays[i]->manager; | ||
354 | break; | ||
355 | } | ||
356 | } | ||
357 | |||
358 | if (!mgr) { | ||
359 | r = -EINVAL; | ||
360 | goto err; | ||
361 | } | ||
362 | |||
363 | *ck = omapfb_color_keys[mgr->id]; | ||
364 | err: | ||
365 | omapfb_unlock(fbdev); | ||
366 | |||
367 | return r; | ||
368 | } | ||
369 | |||
370 | static int omapfb_memory_read(struct fb_info *fbi, | ||
371 | struct omapfb_memory_read *mr) | ||
372 | { | ||
373 | struct omap_dss_device *display = fb2display(fbi); | ||
374 | void *buf; | ||
375 | int r; | ||
376 | |||
377 | if (!display || !display->memory_read) | ||
378 | return -ENOENT; | ||
379 | |||
380 | if (!access_ok(VERIFY_WRITE, mr->buffer, mr->buffer_size)) | ||
381 | return -EFAULT; | ||
382 | |||
383 | if (mr->w * mr->h * 3 > mr->buffer_size) | ||
384 | return -EINVAL; | ||
385 | |||
386 | buf = vmalloc(mr->buffer_size); | ||
387 | if (!buf) { | ||
388 | DBG("vmalloc failed\n"); | ||
389 | return -ENOMEM; | ||
390 | } | ||
391 | |||
392 | r = display->memory_read(display, buf, mr->buffer_size, | ||
393 | mr->x, mr->y, mr->w, mr->h); | ||
394 | |||
395 | if (r > 0) { | ||
396 | if (copy_to_user(mr->buffer, buf, mr->buffer_size)) | ||
397 | r = -EFAULT; | ||
398 | } | ||
399 | |||
400 | vfree(buf); | ||
401 | |||
402 | return r; | ||
403 | } | ||
404 | |||
405 | static int omapfb_get_ovl_colormode(struct omapfb2_device *fbdev, | ||
406 | struct omapfb_ovl_colormode *mode) | ||
407 | { | ||
408 | int ovl_idx = mode->overlay_idx; | ||
409 | int mode_idx = mode->mode_idx; | ||
410 | struct omap_overlay *ovl; | ||
411 | enum omap_color_mode supported_modes; | ||
412 | struct fb_var_screeninfo var; | ||
413 | int i; | ||
414 | |||
415 | if (ovl_idx >= fbdev->num_overlays) | ||
416 | return -ENODEV; | ||
417 | ovl = fbdev->overlays[ovl_idx]; | ||
418 | supported_modes = ovl->supported_modes; | ||
419 | |||
420 | mode_idx = mode->mode_idx; | ||
421 | |||
422 | for (i = 0; i < sizeof(supported_modes) * 8; i++) { | ||
423 | if (!(supported_modes & (1 << i))) | ||
424 | continue; | ||
425 | /* | ||
426 | * It's possible that the FB doesn't support a mode | ||
427 | * that is supported by the overlay, so call the | ||
428 | * following here. | ||
429 | */ | ||
430 | if (dss_mode_to_fb_mode(1 << i, &var) < 0) | ||
431 | continue; | ||
432 | |||
433 | mode_idx--; | ||
434 | if (mode_idx < 0) | ||
435 | break; | ||
436 | } | ||
437 | |||
438 | if (i == sizeof(supported_modes) * 8) | ||
439 | return -ENOENT; | ||
440 | |||
441 | mode->bits_per_pixel = var.bits_per_pixel; | ||
442 | mode->nonstd = var.nonstd; | ||
443 | mode->red = var.red; | ||
444 | mode->green = var.green; | ||
445 | mode->blue = var.blue; | ||
446 | mode->transp = var.transp; | ||
447 | |||
448 | return 0; | ||
449 | } | ||
450 | |||
451 | static int omapfb_wait_for_go(struct fb_info *fbi) | ||
452 | { | ||
453 | struct omapfb_info *ofbi = FB2OFB(fbi); | ||
454 | int r = 0; | ||
455 | int i; | ||
456 | |||
457 | for (i = 0; i < ofbi->num_overlays; ++i) { | ||
458 | struct omap_overlay *ovl = ofbi->overlays[i]; | ||
459 | r = ovl->wait_for_go(ovl); | ||
460 | if (r) | ||
461 | break; | ||
462 | } | ||
463 | |||
464 | return r; | ||
465 | } | ||
466 | |||
467 | int omapfb_ioctl(struct fb_info *fbi, unsigned int cmd, unsigned long arg) | ||
468 | { | ||
469 | struct omapfb_info *ofbi = FB2OFB(fbi); | ||
470 | struct omapfb2_device *fbdev = ofbi->fbdev; | ||
471 | struct omap_dss_device *display = fb2display(fbi); | ||
472 | |||
473 | union { | ||
474 | struct omapfb_update_window_old uwnd_o; | ||
475 | struct omapfb_update_window uwnd; | ||
476 | struct omapfb_plane_info plane_info; | ||
477 | struct omapfb_caps caps; | ||
478 | struct omapfb_mem_info mem_info; | ||
479 | struct omapfb_color_key color_key; | ||
480 | struct omapfb_ovl_colormode ovl_colormode; | ||
481 | enum omapfb_update_mode update_mode; | ||
482 | int test_num; | ||
483 | struct omapfb_memory_read memory_read; | ||
484 | struct omapfb_vram_info vram_info; | ||
485 | struct omapfb_tearsync_info tearsync_info; | ||
486 | } p; | ||
487 | |||
488 | int r = 0; | ||
489 | |||
490 | switch (cmd) { | ||
491 | case OMAPFB_SYNC_GFX: | ||
492 | DBG("ioctl SYNC_GFX\n"); | ||
493 | if (!display || !display->sync) { | ||
494 | /* DSS1 never returns an error here, so we neither */ | ||
495 | /*r = -EINVAL;*/ | ||
496 | break; | ||
497 | } | ||
498 | |||
499 | r = display->sync(display); | ||
500 | break; | ||
501 | |||
502 | case OMAPFB_UPDATE_WINDOW_OLD: | ||
503 | DBG("ioctl UPDATE_WINDOW_OLD\n"); | ||
504 | if (!display || !display->update) { | ||
505 | r = -EINVAL; | ||
506 | break; | ||
507 | } | ||
508 | |||
509 | if (copy_from_user(&p.uwnd_o, | ||
510 | (void __user *)arg, | ||
511 | sizeof(p.uwnd_o))) { | ||
512 | r = -EFAULT; | ||
513 | break; | ||
514 | } | ||
515 | |||
516 | r = omapfb_update_window_nolock(fbi, p.uwnd_o.x, p.uwnd_o.y, | ||
517 | p.uwnd_o.width, p.uwnd_o.height); | ||
518 | break; | ||
519 | |||
520 | case OMAPFB_UPDATE_WINDOW: | ||
521 | DBG("ioctl UPDATE_WINDOW\n"); | ||
522 | if (!display || !display->update) { | ||
523 | r = -EINVAL; | ||
524 | break; | ||
525 | } | ||
526 | |||
527 | if (copy_from_user(&p.uwnd, (void __user *)arg, | ||
528 | sizeof(p.uwnd))) { | ||
529 | r = -EFAULT; | ||
530 | break; | ||
531 | } | ||
532 | |||
533 | r = omapfb_update_window_nolock(fbi, p.uwnd.x, p.uwnd.y, | ||
534 | p.uwnd.width, p.uwnd.height); | ||
535 | break; | ||
536 | |||
537 | case OMAPFB_SETUP_PLANE: | ||
538 | DBG("ioctl SETUP_PLANE\n"); | ||
539 | if (copy_from_user(&p.plane_info, (void __user *)arg, | ||
540 | sizeof(p.plane_info))) | ||
541 | r = -EFAULT; | ||
542 | else | ||
543 | r = omapfb_setup_plane(fbi, &p.plane_info); | ||
544 | break; | ||
545 | |||
546 | case OMAPFB_QUERY_PLANE: | ||
547 | DBG("ioctl QUERY_PLANE\n"); | ||
548 | r = omapfb_query_plane(fbi, &p.plane_info); | ||
549 | if (r < 0) | ||
550 | break; | ||
551 | if (copy_to_user((void __user *)arg, &p.plane_info, | ||
552 | sizeof(p.plane_info))) | ||
553 | r = -EFAULT; | ||
554 | break; | ||
555 | |||
556 | case OMAPFB_SETUP_MEM: | ||
557 | DBG("ioctl SETUP_MEM\n"); | ||
558 | if (copy_from_user(&p.mem_info, (void __user *)arg, | ||
559 | sizeof(p.mem_info))) | ||
560 | r = -EFAULT; | ||
561 | else | ||
562 | r = omapfb_setup_mem(fbi, &p.mem_info); | ||
563 | break; | ||
564 | |||
565 | case OMAPFB_QUERY_MEM: | ||
566 | DBG("ioctl QUERY_MEM\n"); | ||
567 | r = omapfb_query_mem(fbi, &p.mem_info); | ||
568 | if (r < 0) | ||
569 | break; | ||
570 | if (copy_to_user((void __user *)arg, &p.mem_info, | ||
571 | sizeof(p.mem_info))) | ||
572 | r = -EFAULT; | ||
573 | break; | ||
574 | |||
575 | case OMAPFB_GET_CAPS: | ||
576 | DBG("ioctl GET_CAPS\n"); | ||
577 | if (!display) { | ||
578 | r = -EINVAL; | ||
579 | break; | ||
580 | } | ||
581 | |||
582 | memset(&p.caps, 0, sizeof(p.caps)); | ||
583 | if (display->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE) | ||
584 | p.caps.ctrl |= OMAPFB_CAPS_MANUAL_UPDATE; | ||
585 | if (display->caps & OMAP_DSS_DISPLAY_CAP_TEAR_ELIM) | ||
586 | p.caps.ctrl |= OMAPFB_CAPS_TEARSYNC; | ||
587 | |||
588 | if (copy_to_user((void __user *)arg, &p.caps, sizeof(p.caps))) | ||
589 | r = -EFAULT; | ||
590 | break; | ||
591 | |||
592 | case OMAPFB_GET_OVERLAY_COLORMODE: | ||
593 | DBG("ioctl GET_OVERLAY_COLORMODE\n"); | ||
594 | if (copy_from_user(&p.ovl_colormode, (void __user *)arg, | ||
595 | sizeof(p.ovl_colormode))) { | ||
596 | r = -EFAULT; | ||
597 | break; | ||
598 | } | ||
599 | r = omapfb_get_ovl_colormode(fbdev, &p.ovl_colormode); | ||
600 | if (r < 0) | ||
601 | break; | ||
602 | if (copy_to_user((void __user *)arg, &p.ovl_colormode, | ||
603 | sizeof(p.ovl_colormode))) | ||
604 | r = -EFAULT; | ||
605 | break; | ||
606 | |||
607 | case OMAPFB_SET_UPDATE_MODE: | ||
608 | DBG("ioctl SET_UPDATE_MODE\n"); | ||
609 | if (get_user(p.update_mode, (int __user *)arg)) | ||
610 | r = -EFAULT; | ||
611 | else | ||
612 | r = omapfb_set_update_mode(fbi, p.update_mode); | ||
613 | break; | ||
614 | |||
615 | case OMAPFB_GET_UPDATE_MODE: | ||
616 | DBG("ioctl GET_UPDATE_MODE\n"); | ||
617 | r = omapfb_get_update_mode(fbi, &p.update_mode); | ||
618 | if (r) | ||
619 | break; | ||
620 | if (put_user(p.update_mode, | ||
621 | (enum omapfb_update_mode __user *)arg)) | ||
622 | r = -EFAULT; | ||
623 | break; | ||
624 | |||
625 | case OMAPFB_SET_COLOR_KEY: | ||
626 | DBG("ioctl SET_COLOR_KEY\n"); | ||
627 | if (copy_from_user(&p.color_key, (void __user *)arg, | ||
628 | sizeof(p.color_key))) | ||
629 | r = -EFAULT; | ||
630 | else | ||
631 | r = omapfb_set_color_key(fbi, &p.color_key); | ||
632 | break; | ||
633 | |||
634 | case OMAPFB_GET_COLOR_KEY: | ||
635 | DBG("ioctl GET_COLOR_KEY\n"); | ||
636 | r = omapfb_get_color_key(fbi, &p.color_key); | ||
637 | if (r) | ||
638 | break; | ||
639 | if (copy_to_user((void __user *)arg, &p.color_key, | ||
640 | sizeof(p.color_key))) | ||
641 | r = -EFAULT; | ||
642 | break; | ||
643 | |||
644 | case OMAPFB_WAITFORVSYNC: | ||
645 | DBG("ioctl WAITFORVSYNC\n"); | ||
646 | if (!display) { | ||
647 | r = -EINVAL; | ||
648 | break; | ||
649 | } | ||
650 | |||
651 | r = display->wait_vsync(display); | ||
652 | break; | ||
653 | |||
654 | case OMAPFB_WAITFORGO: | ||
655 | DBG("ioctl WAITFORGO\n"); | ||
656 | if (!display) { | ||
657 | r = -EINVAL; | ||
658 | break; | ||
659 | } | ||
660 | |||
661 | r = omapfb_wait_for_go(fbi); | ||
662 | break; | ||
663 | |||
664 | /* LCD and CTRL tests do the same thing for backward | ||
665 | * compatibility */ | ||
666 | case OMAPFB_LCD_TEST: | ||
667 | DBG("ioctl LCD_TEST\n"); | ||
668 | if (get_user(p.test_num, (int __user *)arg)) { | ||
669 | r = -EFAULT; | ||
670 | break; | ||
671 | } | ||
672 | if (!display || !display->run_test) { | ||
673 | r = -EINVAL; | ||
674 | break; | ||
675 | } | ||
676 | |||
677 | r = display->run_test(display, p.test_num); | ||
678 | |||
679 | break; | ||
680 | |||
681 | case OMAPFB_CTRL_TEST: | ||
682 | DBG("ioctl CTRL_TEST\n"); | ||
683 | if (get_user(p.test_num, (int __user *)arg)) { | ||
684 | r = -EFAULT; | ||
685 | break; | ||
686 | } | ||
687 | if (!display || !display->run_test) { | ||
688 | r = -EINVAL; | ||
689 | break; | ||
690 | } | ||
691 | |||
692 | r = display->run_test(display, p.test_num); | ||
693 | |||
694 | break; | ||
695 | |||
696 | case OMAPFB_MEMORY_READ: | ||
697 | DBG("ioctl MEMORY_READ\n"); | ||
698 | |||
699 | if (copy_from_user(&p.memory_read, (void __user *)arg, | ||
700 | sizeof(p.memory_read))) { | ||
701 | r = -EFAULT; | ||
702 | break; | ||
703 | } | ||
704 | |||
705 | r = omapfb_memory_read(fbi, &p.memory_read); | ||
706 | |||
707 | break; | ||
708 | |||
709 | case OMAPFB_GET_VRAM_INFO: { | ||
710 | unsigned long vram, free, largest; | ||
711 | |||
712 | DBG("ioctl GET_VRAM_INFO\n"); | ||
713 | |||
714 | omap_vram_get_info(&vram, &free, &largest); | ||
715 | p.vram_info.total = vram; | ||
716 | p.vram_info.free = free; | ||
717 | p.vram_info.largest_free_block = largest; | ||
718 | |||
719 | if (copy_to_user((void __user *)arg, &p.vram_info, | ||
720 | sizeof(p.vram_info))) | ||
721 | r = -EFAULT; | ||
722 | break; | ||
723 | } | ||
724 | |||
725 | case OMAPFB_SET_TEARSYNC: { | ||
726 | DBG("ioctl SET_TEARSYNC\n"); | ||
727 | |||
728 | if (copy_from_user(&p.tearsync_info, (void __user *)arg, | ||
729 | sizeof(p.tearsync_info))) { | ||
730 | r = -EFAULT; | ||
731 | break; | ||
732 | } | ||
733 | |||
734 | if (!display->enable_te) { | ||
735 | r = -ENODEV; | ||
736 | break; | ||
737 | } | ||
738 | |||
739 | r = display->enable_te(display, !!p.tearsync_info.enabled); | ||
740 | |||
741 | break; | ||
742 | } | ||
743 | |||
744 | default: | ||
745 | dev_err(fbdev->dev, "Unknown ioctl 0x%x\n", cmd); | ||
746 | r = -EINVAL; | ||
747 | } | ||
748 | |||
749 | if (r < 0) | ||
750 | DBG("ioctl failed: %d\n", r); | ||
751 | |||
752 | return r; | ||
753 | } | ||
754 | |||
755 | |||
diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c new file mode 100644 index 000000000000..ef299839858a --- /dev/null +++ b/drivers/video/omap2/omapfb/omapfb-main.c | |||
@@ -0,0 +1,2261 @@ | |||
1 | /* | ||
2 | * linux/drivers/video/omap2/omapfb-main.c | ||
3 | * | ||
4 | * Copyright (C) 2008 Nokia Corporation | ||
5 | * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> | ||
6 | * | ||
7 | * Some code and ideas taken from drivers/video/omap/ driver | ||
8 | * by Imre Deak. | ||
9 | * | ||
10 | * This program is free software; you can redistribute it and/or modify it | ||
11 | * under the terms of the GNU General Public License version 2 as published by | ||
12 | * the Free Software Foundation. | ||
13 | * | ||
14 | * This program is distributed in the hope that it will be useful, but WITHOUT | ||
15 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | ||
16 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for | ||
17 | * more details. | ||
18 | * | ||
19 | * You should have received a copy of the GNU General Public License along with | ||
20 | * this program. If not, see <http://www.gnu.org/licenses/>. | ||
21 | */ | ||
22 | |||
23 | #include <linux/module.h> | ||
24 | #include <linux/delay.h> | ||
25 | #include <linux/fb.h> | ||
26 | #include <linux/dma-mapping.h> | ||
27 | #include <linux/vmalloc.h> | ||
28 | #include <linux/device.h> | ||
29 | #include <linux/platform_device.h> | ||
30 | #include <linux/omapfb.h> | ||
31 | |||
32 | #include <plat/display.h> | ||
33 | #include <plat/vram.h> | ||
34 | #include <plat/vrfb.h> | ||
35 | |||
36 | #include "omapfb.h" | ||
37 | |||
38 | #define MODULE_NAME "omapfb" | ||
39 | |||
40 | #define OMAPFB_PLANE_XRES_MIN 8 | ||
41 | #define OMAPFB_PLANE_YRES_MIN 8 | ||
42 | |||
43 | static char *def_mode; | ||
44 | static char *def_vram; | ||
45 | static int def_vrfb; | ||
46 | static int def_rotate; | ||
47 | static int def_mirror; | ||
48 | |||
49 | #ifdef DEBUG | ||
50 | unsigned int omapfb_debug; | ||
51 | module_param_named(debug, omapfb_debug, bool, 0644); | ||
52 | static unsigned int omapfb_test_pattern; | ||
53 | module_param_named(test, omapfb_test_pattern, bool, 0644); | ||
54 | #endif | ||
55 | |||
56 | static int omapfb_fb_init(struct omapfb2_device *fbdev, struct fb_info *fbi); | ||
57 | |||
58 | #ifdef DEBUG | ||
59 | static void draw_pixel(struct fb_info *fbi, int x, int y, unsigned color) | ||
60 | { | ||
61 | struct fb_var_screeninfo *var = &fbi->var; | ||
62 | struct fb_fix_screeninfo *fix = &fbi->fix; | ||
63 | void __iomem *addr = fbi->screen_base; | ||
64 | const unsigned bytespp = var->bits_per_pixel >> 3; | ||
65 | const unsigned line_len = fix->line_length / bytespp; | ||
66 | |||
67 | int r = (color >> 16) & 0xff; | ||
68 | int g = (color >> 8) & 0xff; | ||
69 | int b = (color >> 0) & 0xff; | ||
70 | |||
71 | if (var->bits_per_pixel == 16) { | ||
72 | u16 __iomem *p = (u16 __iomem *)addr; | ||
73 | p += y * line_len + x; | ||
74 | |||
75 | r = r * 32 / 256; | ||
76 | g = g * 64 / 256; | ||
77 | b = b * 32 / 256; | ||
78 | |||
79 | __raw_writew((r << 11) | (g << 5) | (b << 0), p); | ||
80 | } else if (var->bits_per_pixel == 24) { | ||
81 | u8 __iomem *p = (u8 __iomem *)addr; | ||
82 | p += (y * line_len + x) * 3; | ||
83 | |||
84 | __raw_writeb(b, p + 0); | ||
85 | __raw_writeb(g, p + 1); | ||
86 | __raw_writeb(r, p + 2); | ||
87 | } else if (var->bits_per_pixel == 32) { | ||
88 | u32 __iomem *p = (u32 __iomem *)addr; | ||
89 | p += y * line_len + x; | ||
90 | __raw_writel(color, p); | ||
91 | } | ||
92 | } | ||
93 | |||
94 | static void fill_fb(struct fb_info *fbi) | ||
95 | { | ||
96 | struct fb_var_screeninfo *var = &fbi->var; | ||
97 | const short w = var->xres_virtual; | ||
98 | const short h = var->yres_virtual; | ||
99 | void __iomem *addr = fbi->screen_base; | ||
100 | int y, x; | ||
101 | |||
102 | if (!addr) | ||
103 | return; | ||
104 | |||
105 | DBG("fill_fb %dx%d, line_len %d bytes\n", w, h, fbi->fix.line_length); | ||
106 | |||
107 | for (y = 0; y < h; y++) { | ||
108 | for (x = 0; x < w; x++) { | ||
109 | if (x < 20 && y < 20) | ||
110 | draw_pixel(fbi, x, y, 0xffffff); | ||
111 | else if (x < 20 && (y > 20 && y < h - 20)) | ||
112 | draw_pixel(fbi, x, y, 0xff); | ||
113 | else if (y < 20 && (x > 20 && x < w - 20)) | ||
114 | draw_pixel(fbi, x, y, 0xff00); | ||
115 | else if (x > w - 20 && (y > 20 && y < h - 20)) | ||
116 | draw_pixel(fbi, x, y, 0xff0000); | ||
117 | else if (y > h - 20 && (x > 20 && x < w - 20)) | ||
118 | draw_pixel(fbi, x, y, 0xffff00); | ||
119 | else if (x == 20 || x == w - 20 || | ||
120 | y == 20 || y == h - 20) | ||
121 | draw_pixel(fbi, x, y, 0xffffff); | ||
122 | else if (x == y || w - x == h - y) | ||
123 | draw_pixel(fbi, x, y, 0xff00ff); | ||
124 | else if (w - x == y || x == h - y) | ||
125 | draw_pixel(fbi, x, y, 0x00ffff); | ||
126 | else if (x > 20 && y > 20 && x < w - 20 && y < h - 20) { | ||
127 | int t = x * 3 / w; | ||
128 | unsigned r = 0, g = 0, b = 0; | ||
129 | unsigned c; | ||
130 | if (var->bits_per_pixel == 16) { | ||
131 | if (t == 0) | ||
132 | b = (y % 32) * 256 / 32; | ||
133 | else if (t == 1) | ||
134 | g = (y % 64) * 256 / 64; | ||
135 | else if (t == 2) | ||
136 | r = (y % 32) * 256 / 32; | ||
137 | } else { | ||
138 | if (t == 0) | ||
139 | b = (y % 256); | ||
140 | else if (t == 1) | ||
141 | g = (y % 256); | ||
142 | else if (t == 2) | ||
143 | r = (y % 256); | ||
144 | } | ||
145 | c = (r << 16) | (g << 8) | (b << 0); | ||
146 | draw_pixel(fbi, x, y, c); | ||
147 | } else { | ||
148 | draw_pixel(fbi, x, y, 0); | ||
149 | } | ||
150 | } | ||
151 | } | ||
152 | } | ||
153 | #endif | ||
154 | |||
155 | static unsigned omapfb_get_vrfb_offset(struct omapfb_info *ofbi, int rot) | ||
156 | { | ||
157 | struct vrfb *vrfb = &ofbi->region.vrfb; | ||
158 | unsigned offset; | ||
159 | |||
160 | switch (rot) { | ||
161 | case FB_ROTATE_UR: | ||
162 | offset = 0; | ||
163 | break; | ||
164 | case FB_ROTATE_CW: | ||
165 | offset = vrfb->yoffset; | ||
166 | break; | ||
167 | case FB_ROTATE_UD: | ||
168 | offset = vrfb->yoffset * OMAP_VRFB_LINE_LEN + vrfb->xoffset; | ||
169 | break; | ||
170 | case FB_ROTATE_CCW: | ||
171 | offset = vrfb->xoffset * OMAP_VRFB_LINE_LEN; | ||
172 | break; | ||
173 | default: | ||
174 | BUG(); | ||
175 | } | ||
176 | |||
177 | offset *= vrfb->bytespp; | ||
178 | |||
179 | return offset; | ||
180 | } | ||
181 | |||
182 | static u32 omapfb_get_region_rot_paddr(struct omapfb_info *ofbi, int rot) | ||
183 | { | ||
184 | if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) { | ||
185 | return ofbi->region.vrfb.paddr[rot] | ||
186 | + omapfb_get_vrfb_offset(ofbi, rot); | ||
187 | } else { | ||
188 | return ofbi->region.paddr; | ||
189 | } | ||
190 | } | ||
191 | |||
192 | static u32 omapfb_get_region_paddr(struct omapfb_info *ofbi) | ||
193 | { | ||
194 | if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) | ||
195 | return ofbi->region.vrfb.paddr[0]; | ||
196 | else | ||
197 | return ofbi->region.paddr; | ||
198 | } | ||
199 | |||
200 | static void __iomem *omapfb_get_region_vaddr(struct omapfb_info *ofbi) | ||
201 | { | ||
202 | if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) | ||
203 | return ofbi->region.vrfb.vaddr[0]; | ||
204 | else | ||
205 | return ofbi->region.vaddr; | ||
206 | } | ||
207 | |||
208 | static struct omapfb_colormode omapfb_colormodes[] = { | ||
209 | { | ||
210 | .dssmode = OMAP_DSS_COLOR_UYVY, | ||
211 | .bits_per_pixel = 16, | ||
212 | .nonstd = OMAPFB_COLOR_YUV422, | ||
213 | }, { | ||
214 | .dssmode = OMAP_DSS_COLOR_YUV2, | ||
215 | .bits_per_pixel = 16, | ||
216 | .nonstd = OMAPFB_COLOR_YUY422, | ||
217 | }, { | ||
218 | .dssmode = OMAP_DSS_COLOR_ARGB16, | ||
219 | .bits_per_pixel = 16, | ||
220 | .red = { .length = 4, .offset = 8, .msb_right = 0 }, | ||
221 | .green = { .length = 4, .offset = 4, .msb_right = 0 }, | ||
222 | .blue = { .length = 4, .offset = 0, .msb_right = 0 }, | ||
223 | .transp = { .length = 4, .offset = 12, .msb_right = 0 }, | ||
224 | }, { | ||
225 | .dssmode = OMAP_DSS_COLOR_RGB16, | ||
226 | .bits_per_pixel = 16, | ||
227 | .red = { .length = 5, .offset = 11, .msb_right = 0 }, | ||
228 | .green = { .length = 6, .offset = 5, .msb_right = 0 }, | ||
229 | .blue = { .length = 5, .offset = 0, .msb_right = 0 }, | ||
230 | .transp = { .length = 0, .offset = 0, .msb_right = 0 }, | ||
231 | }, { | ||
232 | .dssmode = OMAP_DSS_COLOR_RGB24P, | ||
233 | .bits_per_pixel = 24, | ||
234 | .red = { .length = 8, .offset = 16, .msb_right = 0 }, | ||
235 | .green = { .length = 8, .offset = 8, .msb_right = 0 }, | ||
236 | .blue = { .length = 8, .offset = 0, .msb_right = 0 }, | ||
237 | .transp = { .length = 0, .offset = 0, .msb_right = 0 }, | ||
238 | }, { | ||
239 | .dssmode = OMAP_DSS_COLOR_RGB24U, | ||
240 | .bits_per_pixel = 32, | ||
241 | .red = { .length = 8, .offset = 16, .msb_right = 0 }, | ||
242 | .green = { .length = 8, .offset = 8, .msb_right = 0 }, | ||
243 | .blue = { .length = 8, .offset = 0, .msb_right = 0 }, | ||
244 | .transp = { .length = 0, .offset = 0, .msb_right = 0 }, | ||
245 | }, { | ||
246 | .dssmode = OMAP_DSS_COLOR_ARGB32, | ||
247 | .bits_per_pixel = 32, | ||
248 | .red = { .length = 8, .offset = 16, .msb_right = 0 }, | ||
249 | .green = { .length = 8, .offset = 8, .msb_right = 0 }, | ||
250 | .blue = { .length = 8, .offset = 0, .msb_right = 0 }, | ||
251 | .transp = { .length = 8, .offset = 24, .msb_right = 0 }, | ||
252 | }, { | ||
253 | .dssmode = OMAP_DSS_COLOR_RGBA32, | ||
254 | .bits_per_pixel = 32, | ||
255 | .red = { .length = 8, .offset = 24, .msb_right = 0 }, | ||
256 | .green = { .length = 8, .offset = 16, .msb_right = 0 }, | ||
257 | .blue = { .length = 8, .offset = 8, .msb_right = 0 }, | ||
258 | .transp = { .length = 8, .offset = 0, .msb_right = 0 }, | ||
259 | }, { | ||
260 | .dssmode = OMAP_DSS_COLOR_RGBX32, | ||
261 | .bits_per_pixel = 32, | ||
262 | .red = { .length = 8, .offset = 24, .msb_right = 0 }, | ||
263 | .green = { .length = 8, .offset = 16, .msb_right = 0 }, | ||
264 | .blue = { .length = 8, .offset = 8, .msb_right = 0 }, | ||
265 | .transp = { .length = 0, .offset = 0, .msb_right = 0 }, | ||
266 | }, | ||
267 | }; | ||
268 | |||
269 | static bool cmp_var_to_colormode(struct fb_var_screeninfo *var, | ||
270 | struct omapfb_colormode *color) | ||
271 | { | ||
272 | bool cmp_component(struct fb_bitfield *f1, struct fb_bitfield *f2) | ||
273 | { | ||
274 | return f1->length == f2->length && | ||
275 | f1->offset == f2->offset && | ||
276 | f1->msb_right == f2->msb_right; | ||
277 | } | ||
278 | |||
279 | if (var->bits_per_pixel == 0 || | ||
280 | var->red.length == 0 || | ||
281 | var->blue.length == 0 || | ||
282 | var->green.length == 0) | ||
283 | return 0; | ||
284 | |||
285 | return var->bits_per_pixel == color->bits_per_pixel && | ||
286 | cmp_component(&var->red, &color->red) && | ||
287 | cmp_component(&var->green, &color->green) && | ||
288 | cmp_component(&var->blue, &color->blue) && | ||
289 | cmp_component(&var->transp, &color->transp); | ||
290 | } | ||
291 | |||
292 | static void assign_colormode_to_var(struct fb_var_screeninfo *var, | ||
293 | struct omapfb_colormode *color) | ||
294 | { | ||
295 | var->bits_per_pixel = color->bits_per_pixel; | ||
296 | var->nonstd = color->nonstd; | ||
297 | var->red = color->red; | ||
298 | var->green = color->green; | ||
299 | var->blue = color->blue; | ||
300 | var->transp = color->transp; | ||
301 | } | ||
302 | |||
303 | static int fb_mode_to_dss_mode(struct fb_var_screeninfo *var, | ||
304 | enum omap_color_mode *mode) | ||
305 | { | ||
306 | enum omap_color_mode dssmode; | ||
307 | int i; | ||
308 | |||
309 | /* first match with nonstd field */ | ||
310 | if (var->nonstd) { | ||
311 | for (i = 0; i < ARRAY_SIZE(omapfb_colormodes); ++i) { | ||
312 | struct omapfb_colormode *m = &omapfb_colormodes[i]; | ||
313 | if (var->nonstd == m->nonstd) { | ||
314 | assign_colormode_to_var(var, m); | ||
315 | *mode = m->dssmode; | ||
316 | return 0; | ||
317 | } | ||
318 | } | ||
319 | |||
320 | return -EINVAL; | ||
321 | } | ||
322 | |||
323 | /* then try exact match of bpp and colors */ | ||
324 | for (i = 0; i < ARRAY_SIZE(omapfb_colormodes); ++i) { | ||
325 | struct omapfb_colormode *m = &omapfb_colormodes[i]; | ||
326 | if (cmp_var_to_colormode(var, m)) { | ||
327 | assign_colormode_to_var(var, m); | ||
328 | *mode = m->dssmode; | ||
329 | return 0; | ||
330 | } | ||
331 | } | ||
332 | |||
333 | /* match with bpp if user has not filled color fields | ||
334 | * properly */ | ||
335 | switch (var->bits_per_pixel) { | ||
336 | case 1: | ||
337 | dssmode = OMAP_DSS_COLOR_CLUT1; | ||
338 | break; | ||
339 | case 2: | ||
340 | dssmode = OMAP_DSS_COLOR_CLUT2; | ||
341 | break; | ||
342 | case 4: | ||
343 | dssmode = OMAP_DSS_COLOR_CLUT4; | ||
344 | break; | ||
345 | case 8: | ||
346 | dssmode = OMAP_DSS_COLOR_CLUT8; | ||
347 | break; | ||
348 | case 12: | ||
349 | dssmode = OMAP_DSS_COLOR_RGB12U; | ||
350 | break; | ||
351 | case 16: | ||
352 | dssmode = OMAP_DSS_COLOR_RGB16; | ||
353 | break; | ||
354 | case 24: | ||
355 | dssmode = OMAP_DSS_COLOR_RGB24P; | ||
356 | break; | ||
357 | case 32: | ||
358 | dssmode = OMAP_DSS_COLOR_RGB24U; | ||
359 | break; | ||
360 | default: | ||
361 | return -EINVAL; | ||
362 | } | ||
363 | |||
364 | for (i = 0; i < ARRAY_SIZE(omapfb_colormodes); ++i) { | ||
365 | struct omapfb_colormode *m = &omapfb_colormodes[i]; | ||
366 | if (dssmode == m->dssmode) { | ||
367 | assign_colormode_to_var(var, m); | ||
368 | *mode = m->dssmode; | ||
369 | return 0; | ||
370 | } | ||
371 | } | ||
372 | |||
373 | return -EINVAL; | ||
374 | } | ||
375 | |||
376 | static int check_fb_res_bounds(struct fb_var_screeninfo *var) | ||
377 | { | ||
378 | int xres_min = OMAPFB_PLANE_XRES_MIN; | ||
379 | int xres_max = 2048; | ||
380 | int yres_min = OMAPFB_PLANE_YRES_MIN; | ||
381 | int yres_max = 2048; | ||
382 | |||
383 | /* XXX: some applications seem to set virtual res to 0. */ | ||
384 | if (var->xres_virtual == 0) | ||
385 | var->xres_virtual = var->xres; | ||
386 | |||
387 | if (var->yres_virtual == 0) | ||
388 | var->yres_virtual = var->yres; | ||
389 | |||
390 | if (var->xres_virtual < xres_min || var->yres_virtual < yres_min) | ||
391 | return -EINVAL; | ||
392 | |||
393 | if (var->xres < xres_min) | ||
394 | var->xres = xres_min; | ||
395 | if (var->yres < yres_min) | ||
396 | var->yres = yres_min; | ||
397 | if (var->xres > xres_max) | ||
398 | var->xres = xres_max; | ||
399 | if (var->yres > yres_max) | ||
400 | var->yres = yres_max; | ||
401 | |||
402 | if (var->xres > var->xres_virtual) | ||
403 | var->xres = var->xres_virtual; | ||
404 | if (var->yres > var->yres_virtual) | ||
405 | var->yres = var->yres_virtual; | ||
406 | |||
407 | return 0; | ||
408 | } | ||
409 | |||
410 | static void shrink_height(unsigned long max_frame_size, | ||
411 | struct fb_var_screeninfo *var) | ||
412 | { | ||
413 | DBG("can't fit FB into memory, reducing y\n"); | ||
414 | var->yres_virtual = max_frame_size / | ||
415 | (var->xres_virtual * var->bits_per_pixel >> 3); | ||
416 | |||
417 | if (var->yres_virtual < OMAPFB_PLANE_YRES_MIN) | ||
418 | var->yres_virtual = OMAPFB_PLANE_YRES_MIN; | ||
419 | |||
420 | if (var->yres > var->yres_virtual) | ||
421 | var->yres = var->yres_virtual; | ||
422 | } | ||
423 | |||
424 | static void shrink_width(unsigned long max_frame_size, | ||
425 | struct fb_var_screeninfo *var) | ||
426 | { | ||
427 | DBG("can't fit FB into memory, reducing x\n"); | ||
428 | var->xres_virtual = max_frame_size / var->yres_virtual / | ||
429 | (var->bits_per_pixel >> 3); | ||
430 | |||
431 | if (var->xres_virtual < OMAPFB_PLANE_XRES_MIN) | ||
432 | var->xres_virtual = OMAPFB_PLANE_XRES_MIN; | ||
433 | |||
434 | if (var->xres > var->xres_virtual) | ||
435 | var->xres = var->xres_virtual; | ||
436 | } | ||
437 | |||
438 | static int check_vrfb_fb_size(unsigned long region_size, | ||
439 | const struct fb_var_screeninfo *var) | ||
440 | { | ||
441 | unsigned long min_phys_size = omap_vrfb_min_phys_size(var->xres_virtual, | ||
442 | var->yres_virtual, var->bits_per_pixel >> 3); | ||
443 | |||
444 | return min_phys_size > region_size ? -EINVAL : 0; | ||
445 | } | ||
446 | |||
447 | static int check_fb_size(const struct omapfb_info *ofbi, | ||
448 | struct fb_var_screeninfo *var) | ||
449 | { | ||
450 | unsigned long max_frame_size = ofbi->region.size; | ||
451 | int bytespp = var->bits_per_pixel >> 3; | ||
452 | unsigned long line_size = var->xres_virtual * bytespp; | ||
453 | |||
454 | if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) { | ||
455 | /* One needs to check for both VRFB and OMAPFB limitations. */ | ||
456 | if (check_vrfb_fb_size(max_frame_size, var)) | ||
457 | shrink_height(omap_vrfb_max_height( | ||
458 | max_frame_size, var->xres_virtual, bytespp) * | ||
459 | line_size, var); | ||
460 | |||
461 | if (check_vrfb_fb_size(max_frame_size, var)) { | ||
462 | DBG("cannot fit FB to memory\n"); | ||
463 | return -EINVAL; | ||
464 | } | ||
465 | |||
466 | return 0; | ||
467 | } | ||
468 | |||
469 | DBG("max frame size %lu, line size %lu\n", max_frame_size, line_size); | ||
470 | |||
471 | if (line_size * var->yres_virtual > max_frame_size) | ||
472 | shrink_height(max_frame_size, var); | ||
473 | |||
474 | if (line_size * var->yres_virtual > max_frame_size) { | ||
475 | shrink_width(max_frame_size, var); | ||
476 | line_size = var->xres_virtual * bytespp; | ||
477 | } | ||
478 | |||
479 | if (line_size * var->yres_virtual > max_frame_size) { | ||
480 | DBG("cannot fit FB to memory\n"); | ||
481 | return -EINVAL; | ||
482 | } | ||
483 | |||
484 | return 0; | ||
485 | } | ||
486 | |||
487 | /* | ||
488 | * Consider if VRFB assisted rotation is in use and if the virtual space for | ||
489 | * the zero degree view needs to be mapped. The need for mapping also acts as | ||
490 | * the trigger for setting up the hardware on the context in question. This | ||
491 | * ensures that one does not attempt to access the virtual view before the | ||
492 | * hardware is serving the address translations. | ||
493 | */ | ||
494 | static int setup_vrfb_rotation(struct fb_info *fbi) | ||
495 | { | ||
496 | struct omapfb_info *ofbi = FB2OFB(fbi); | ||
497 | struct omapfb2_mem_region *rg = &ofbi->region; | ||
498 | struct vrfb *vrfb = &rg->vrfb; | ||
499 | struct fb_var_screeninfo *var = &fbi->var; | ||
500 | struct fb_fix_screeninfo *fix = &fbi->fix; | ||
501 | unsigned bytespp; | ||
502 | bool yuv_mode; | ||
503 | enum omap_color_mode mode; | ||
504 | int r; | ||
505 | bool reconf; | ||
506 | |||
507 | if (!rg->size || ofbi->rotation_type != OMAP_DSS_ROT_VRFB) | ||
508 | return 0; | ||
509 | |||
510 | DBG("setup_vrfb_rotation\n"); | ||
511 | |||
512 | r = fb_mode_to_dss_mode(var, &mode); | ||
513 | if (r) | ||
514 | return r; | ||
515 | |||
516 | bytespp = var->bits_per_pixel >> 3; | ||
517 | |||
518 | yuv_mode = mode == OMAP_DSS_COLOR_YUV2 || mode == OMAP_DSS_COLOR_UYVY; | ||
519 | |||
520 | /* We need to reconfigure VRFB if the resolution changes, if yuv mode | ||
521 | * is enabled/disabled, or if bytes per pixel changes */ | ||
522 | |||
523 | /* XXX we shouldn't allow this when framebuffer is mmapped */ | ||
524 | |||
525 | reconf = false; | ||
526 | |||
527 | if (yuv_mode != vrfb->yuv_mode) | ||
528 | reconf = true; | ||
529 | else if (bytespp != vrfb->bytespp) | ||
530 | reconf = true; | ||
531 | else if (vrfb->xres != var->xres_virtual || | ||
532 | vrfb->yres != var->yres_virtual) | ||
533 | reconf = true; | ||
534 | |||
535 | if (vrfb->vaddr[0] && reconf) { | ||
536 | fbi->screen_base = NULL; | ||
537 | fix->smem_start = 0; | ||
538 | fix->smem_len = 0; | ||
539 | iounmap(vrfb->vaddr[0]); | ||
540 | vrfb->vaddr[0] = NULL; | ||
541 | DBG("setup_vrfb_rotation: reset fb\n"); | ||
542 | } | ||
543 | |||
544 | if (vrfb->vaddr[0]) | ||
545 | return 0; | ||
546 | |||
547 | omap_vrfb_setup(&rg->vrfb, rg->paddr, | ||
548 | var->xres_virtual, | ||
549 | var->yres_virtual, | ||
550 | bytespp, yuv_mode); | ||
551 | |||
552 | /* Now one can ioremap the 0 angle view */ | ||
553 | r = omap_vrfb_map_angle(vrfb, var->yres_virtual, 0); | ||
554 | if (r) | ||
555 | return r; | ||
556 | |||
557 | /* used by open/write in fbmem.c */ | ||
558 | fbi->screen_base = ofbi->region.vrfb.vaddr[0]; | ||
559 | |||
560 | fix->smem_start = ofbi->region.vrfb.paddr[0]; | ||
561 | |||
562 | switch (var->nonstd) { | ||
563 | case OMAPFB_COLOR_YUV422: | ||
564 | case OMAPFB_COLOR_YUY422: | ||
565 | fix->line_length = | ||
566 | (OMAP_VRFB_LINE_LEN * var->bits_per_pixel) >> 2; | ||
567 | break; | ||
568 | default: | ||
569 | fix->line_length = | ||
570 | (OMAP_VRFB_LINE_LEN * var->bits_per_pixel) >> 3; | ||
571 | break; | ||
572 | } | ||
573 | |||
574 | fix->smem_len = var->yres_virtual * fix->line_length; | ||
575 | |||
576 | return 0; | ||
577 | } | ||
578 | |||
579 | int dss_mode_to_fb_mode(enum omap_color_mode dssmode, | ||
580 | struct fb_var_screeninfo *var) | ||
581 | { | ||
582 | int i; | ||
583 | |||
584 | for (i = 0; i < ARRAY_SIZE(omapfb_colormodes); ++i) { | ||
585 | struct omapfb_colormode *mode = &omapfb_colormodes[i]; | ||
586 | if (dssmode == mode->dssmode) { | ||
587 | assign_colormode_to_var(var, mode); | ||
588 | return 0; | ||
589 | } | ||
590 | } | ||
591 | return -ENOENT; | ||
592 | } | ||
593 | |||
594 | void set_fb_fix(struct fb_info *fbi) | ||
595 | { | ||
596 | struct fb_fix_screeninfo *fix = &fbi->fix; | ||
597 | struct fb_var_screeninfo *var = &fbi->var; | ||
598 | struct omapfb_info *ofbi = FB2OFB(fbi); | ||
599 | struct omapfb2_mem_region *rg = &ofbi->region; | ||
600 | |||
601 | DBG("set_fb_fix\n"); | ||
602 | |||
603 | /* used by open/write in fbmem.c */ | ||
604 | fbi->screen_base = (char __iomem *)omapfb_get_region_vaddr(ofbi); | ||
605 | |||
606 | /* used by mmap in fbmem.c */ | ||
607 | if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) { | ||
608 | switch (var->nonstd) { | ||
609 | case OMAPFB_COLOR_YUV422: | ||
610 | case OMAPFB_COLOR_YUY422: | ||
611 | fix->line_length = | ||
612 | (OMAP_VRFB_LINE_LEN * var->bits_per_pixel) >> 2; | ||
613 | break; | ||
614 | default: | ||
615 | fix->line_length = | ||
616 | (OMAP_VRFB_LINE_LEN * var->bits_per_pixel) >> 3; | ||
617 | break; | ||
618 | } | ||
619 | |||
620 | fix->smem_len = var->yres_virtual * fix->line_length; | ||
621 | } else { | ||
622 | fix->line_length = | ||
623 | (var->xres_virtual * var->bits_per_pixel) >> 3; | ||
624 | fix->smem_len = rg->size; | ||
625 | } | ||
626 | |||
627 | fix->smem_start = omapfb_get_region_paddr(ofbi); | ||
628 | |||
629 | fix->type = FB_TYPE_PACKED_PIXELS; | ||
630 | |||
631 | if (var->nonstd) | ||
632 | fix->visual = FB_VISUAL_PSEUDOCOLOR; | ||
633 | else { | ||
634 | switch (var->bits_per_pixel) { | ||
635 | case 32: | ||
636 | case 24: | ||
637 | case 16: | ||
638 | case 12: | ||
639 | fix->visual = FB_VISUAL_TRUECOLOR; | ||
640 | /* 12bpp is stored in 16 bits */ | ||
641 | break; | ||
642 | case 1: | ||
643 | case 2: | ||
644 | case 4: | ||
645 | case 8: | ||
646 | fix->visual = FB_VISUAL_PSEUDOCOLOR; | ||
647 | break; | ||
648 | } | ||
649 | } | ||
650 | |||
651 | fix->accel = FB_ACCEL_NONE; | ||
652 | |||
653 | fix->xpanstep = 1; | ||
654 | fix->ypanstep = 1; | ||
655 | } | ||
656 | |||
657 | /* check new var and possibly modify it to be ok */ | ||
658 | int check_fb_var(struct fb_info *fbi, struct fb_var_screeninfo *var) | ||
659 | { | ||
660 | struct omapfb_info *ofbi = FB2OFB(fbi); | ||
661 | struct omap_dss_device *display = fb2display(fbi); | ||
662 | enum omap_color_mode mode = 0; | ||
663 | int i; | ||
664 | int r; | ||
665 | |||
666 | DBG("check_fb_var %d\n", ofbi->id); | ||
667 | |||
668 | if (ofbi->region.size == 0) | ||
669 | return 0; | ||
670 | |||
671 | r = fb_mode_to_dss_mode(var, &mode); | ||
672 | if (r) { | ||
673 | DBG("cannot convert var to omap dss mode\n"); | ||
674 | return r; | ||
675 | } | ||
676 | |||
677 | for (i = 0; i < ofbi->num_overlays; ++i) { | ||
678 | if ((ofbi->overlays[i]->supported_modes & mode) == 0) { | ||
679 | DBG("invalid mode\n"); | ||
680 | return -EINVAL; | ||
681 | } | ||
682 | } | ||
683 | |||
684 | if (var->rotate < 0 || var->rotate > 3) | ||
685 | return -EINVAL; | ||
686 | |||
687 | if (check_fb_res_bounds(var)) | ||
688 | return -EINVAL; | ||
689 | |||
690 | if (check_fb_size(ofbi, var)) | ||
691 | return -EINVAL; | ||
692 | |||
693 | if (var->xres + var->xoffset > var->xres_virtual) | ||
694 | var->xoffset = var->xres_virtual - var->xres; | ||
695 | if (var->yres + var->yoffset > var->yres_virtual) | ||
696 | var->yoffset = var->yres_virtual - var->yres; | ||
697 | |||
698 | DBG("xres = %d, yres = %d, vxres = %d, vyres = %d\n", | ||
699 | var->xres, var->yres, | ||
700 | var->xres_virtual, var->yres_virtual); | ||
701 | |||
702 | var->height = -1; | ||
703 | var->width = -1; | ||
704 | var->grayscale = 0; | ||
705 | |||
706 | if (display && display->get_timings) { | ||
707 | struct omap_video_timings timings; | ||
708 | display->get_timings(display, &timings); | ||
709 | |||
710 | /* pixclock in ps, the rest in pixclock */ | ||
711 | var->pixclock = timings.pixel_clock != 0 ? | ||
712 | KHZ2PICOS(timings.pixel_clock) : | ||
713 | 0; | ||
714 | var->left_margin = timings.hfp; | ||
715 | var->right_margin = timings.hbp; | ||
716 | var->upper_margin = timings.vfp; | ||
717 | var->lower_margin = timings.vbp; | ||
718 | var->hsync_len = timings.hsw; | ||
719 | var->vsync_len = timings.vsw; | ||
720 | } else { | ||
721 | var->pixclock = 0; | ||
722 | var->left_margin = 0; | ||
723 | var->right_margin = 0; | ||
724 | var->upper_margin = 0; | ||
725 | var->lower_margin = 0; | ||
726 | var->hsync_len = 0; | ||
727 | var->vsync_len = 0; | ||
728 | } | ||
729 | |||
730 | /* TODO: get these from panel->config */ | ||
731 | var->vmode = FB_VMODE_NONINTERLACED; | ||
732 | var->sync = 0; | ||
733 | |||
734 | return 0; | ||
735 | } | ||
736 | |||
737 | /* | ||
738 | * --------------------------------------------------------------------------- | ||
739 | * fbdev framework callbacks | ||
740 | * --------------------------------------------------------------------------- | ||
741 | */ | ||
742 | static int omapfb_open(struct fb_info *fbi, int user) | ||
743 | { | ||
744 | return 0; | ||
745 | } | ||
746 | |||
747 | static int omapfb_release(struct fb_info *fbi, int user) | ||
748 | { | ||
749 | #if 0 | ||
750 | struct omapfb_info *ofbi = FB2OFB(fbi); | ||
751 | struct omapfb2_device *fbdev = ofbi->fbdev; | ||
752 | struct omap_dss_device *display = fb2display(fbi); | ||
753 | |||
754 | DBG("Closing fb with plane index %d\n", ofbi->id); | ||
755 | |||
756 | omapfb_lock(fbdev); | ||
757 | |||
758 | if (display && display->get_update_mode && display->update) { | ||
759 | /* XXX this update should be removed, I think. But it's | ||
760 | * good for debugging */ | ||
761 | if (display->get_update_mode(display) == | ||
762 | OMAP_DSS_UPDATE_MANUAL) { | ||
763 | u16 w, h; | ||
764 | |||
765 | if (display->sync) | ||
766 | display->sync(display); | ||
767 | |||
768 | display->get_resolution(display, &w, &h); | ||
769 | display->update(display, 0, 0, w, h); | ||
770 | } | ||
771 | } | ||
772 | |||
773 | if (display && display->sync) | ||
774 | display->sync(display); | ||
775 | |||
776 | omapfb_unlock(fbdev); | ||
777 | #endif | ||
778 | return 0; | ||
779 | } | ||
780 | |||
781 | static unsigned calc_rotation_offset_dma(struct fb_var_screeninfo *var, | ||
782 | struct fb_fix_screeninfo *fix, int rotation) | ||
783 | { | ||
784 | unsigned offset; | ||
785 | |||
786 | offset = var->yoffset * fix->line_length + | ||
787 | var->xoffset * (var->bits_per_pixel >> 3); | ||
788 | |||
789 | return offset; | ||
790 | } | ||
791 | |||
792 | static unsigned calc_rotation_offset_vrfb(struct fb_var_screeninfo *var, | ||
793 | struct fb_fix_screeninfo *fix, int rotation) | ||
794 | { | ||
795 | unsigned offset; | ||
796 | |||
797 | if (rotation == FB_ROTATE_UD) | ||
798 | offset = (var->yres_virtual - var->yres) * | ||
799 | fix->line_length; | ||
800 | else if (rotation == FB_ROTATE_CW) | ||
801 | offset = (var->yres_virtual - var->yres) * | ||
802 | (var->bits_per_pixel >> 3); | ||
803 | else | ||
804 | offset = 0; | ||
805 | |||
806 | if (rotation == FB_ROTATE_UR) | ||
807 | offset += var->yoffset * fix->line_length + | ||
808 | var->xoffset * (var->bits_per_pixel >> 3); | ||
809 | else if (rotation == FB_ROTATE_UD) | ||
810 | offset -= var->yoffset * fix->line_length + | ||
811 | var->xoffset * (var->bits_per_pixel >> 3); | ||
812 | else if (rotation == FB_ROTATE_CW) | ||
813 | offset -= var->xoffset * fix->line_length + | ||
814 | var->yoffset * (var->bits_per_pixel >> 3); | ||
815 | else if (rotation == FB_ROTATE_CCW) | ||
816 | offset += var->xoffset * fix->line_length + | ||
817 | var->yoffset * (var->bits_per_pixel >> 3); | ||
818 | |||
819 | return offset; | ||
820 | } | ||
821 | |||
822 | |||
823 | /* setup overlay according to the fb */ | ||
824 | static int omapfb_setup_overlay(struct fb_info *fbi, struct omap_overlay *ovl, | ||
825 | u16 posx, u16 posy, u16 outw, u16 outh) | ||
826 | { | ||
827 | int r = 0; | ||
828 | struct omapfb_info *ofbi = FB2OFB(fbi); | ||
829 | struct fb_var_screeninfo *var = &fbi->var; | ||
830 | struct fb_fix_screeninfo *fix = &fbi->fix; | ||
831 | enum omap_color_mode mode = 0; | ||
832 | int offset; | ||
833 | u32 data_start_p; | ||
834 | void __iomem *data_start_v; | ||
835 | struct omap_overlay_info info; | ||
836 | int xres, yres; | ||
837 | int screen_width; | ||
838 | int mirror; | ||
839 | int rotation = var->rotate; | ||
840 | int i; | ||
841 | |||
842 | for (i = 0; i < ofbi->num_overlays; i++) { | ||
843 | if (ovl != ofbi->overlays[i]) | ||
844 | continue; | ||
845 | |||
846 | rotation = (rotation + ofbi->rotation[i]) % 4; | ||
847 | break; | ||
848 | } | ||
849 | |||
850 | DBG("setup_overlay %d, posx %d, posy %d, outw %d, outh %d\n", ofbi->id, | ||
851 | posx, posy, outw, outh); | ||
852 | |||
853 | if (rotation == FB_ROTATE_CW || rotation == FB_ROTATE_CCW) { | ||
854 | xres = var->yres; | ||
855 | yres = var->xres; | ||
856 | } else { | ||
857 | xres = var->xres; | ||
858 | yres = var->yres; | ||
859 | } | ||
860 | |||
861 | |||
862 | if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) { | ||
863 | data_start_p = omapfb_get_region_rot_paddr(ofbi, rotation); | ||
864 | data_start_v = NULL; | ||
865 | } else { | ||
866 | data_start_p = omapfb_get_region_paddr(ofbi); | ||
867 | data_start_v = omapfb_get_region_vaddr(ofbi); | ||
868 | } | ||
869 | |||
870 | if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) | ||
871 | offset = calc_rotation_offset_vrfb(var, fix, rotation); | ||
872 | else | ||
873 | offset = calc_rotation_offset_dma(var, fix, rotation); | ||
874 | |||
875 | data_start_p += offset; | ||
876 | data_start_v += offset; | ||
877 | |||
878 | if (offset) | ||
879 | DBG("offset %d, %d = %d\n", | ||
880 | var->xoffset, var->yoffset, offset); | ||
881 | |||
882 | DBG("paddr %x, vaddr %p\n", data_start_p, data_start_v); | ||
883 | |||
884 | r = fb_mode_to_dss_mode(var, &mode); | ||
885 | if (r) { | ||
886 | DBG("fb_mode_to_dss_mode failed"); | ||
887 | goto err; | ||
888 | } | ||
889 | |||
890 | switch (var->nonstd) { | ||
891 | case OMAPFB_COLOR_YUV422: | ||
892 | case OMAPFB_COLOR_YUY422: | ||
893 | if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) { | ||
894 | screen_width = fix->line_length | ||
895 | / (var->bits_per_pixel >> 2); | ||
896 | break; | ||
897 | } | ||
898 | default: | ||
899 | screen_width = fix->line_length / (var->bits_per_pixel >> 3); | ||
900 | break; | ||
901 | } | ||
902 | |||
903 | ovl->get_overlay_info(ovl, &info); | ||
904 | |||
905 | if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) | ||
906 | mirror = 0; | ||
907 | else | ||
908 | mirror = ofbi->mirror; | ||
909 | |||
910 | info.paddr = data_start_p; | ||
911 | info.vaddr = data_start_v; | ||
912 | info.screen_width = screen_width; | ||
913 | info.width = xres; | ||
914 | info.height = yres; | ||
915 | info.color_mode = mode; | ||
916 | info.rotation_type = ofbi->rotation_type; | ||
917 | info.rotation = rotation; | ||
918 | info.mirror = mirror; | ||
919 | |||
920 | info.pos_x = posx; | ||
921 | info.pos_y = posy; | ||
922 | info.out_width = outw; | ||
923 | info.out_height = outh; | ||
924 | |||
925 | r = ovl->set_overlay_info(ovl, &info); | ||
926 | if (r) { | ||
927 | DBG("ovl->setup_overlay_info failed\n"); | ||
928 | goto err; | ||
929 | } | ||
930 | |||
931 | return 0; | ||
932 | |||
933 | err: | ||
934 | DBG("setup_overlay failed\n"); | ||
935 | return r; | ||
936 | } | ||
937 | |||
938 | /* apply var to the overlay */ | ||
939 | int omapfb_apply_changes(struct fb_info *fbi, int init) | ||
940 | { | ||
941 | int r = 0; | ||
942 | struct omapfb_info *ofbi = FB2OFB(fbi); | ||
943 | struct fb_var_screeninfo *var = &fbi->var; | ||
944 | struct omap_overlay *ovl; | ||
945 | u16 posx, posy; | ||
946 | u16 outw, outh; | ||
947 | int i; | ||
948 | |||
949 | #ifdef DEBUG | ||
950 | if (omapfb_test_pattern) | ||
951 | fill_fb(fbi); | ||
952 | #endif | ||
953 | |||
954 | for (i = 0; i < ofbi->num_overlays; i++) { | ||
955 | ovl = ofbi->overlays[i]; | ||
956 | |||
957 | DBG("apply_changes, fb %d, ovl %d\n", ofbi->id, ovl->id); | ||
958 | |||
959 | if (ofbi->region.size == 0) { | ||
960 | /* the fb is not available. disable the overlay */ | ||
961 | omapfb_overlay_enable(ovl, 0); | ||
962 | if (!init && ovl->manager) | ||
963 | ovl->manager->apply(ovl->manager); | ||
964 | continue; | ||
965 | } | ||
966 | |||
967 | if (init || (ovl->caps & OMAP_DSS_OVL_CAP_SCALE) == 0) { | ||
968 | int rotation = (var->rotate + ofbi->rotation[i]) % 4; | ||
969 | if (rotation == FB_ROTATE_CW || | ||
970 | rotation == FB_ROTATE_CCW) { | ||
971 | outw = var->yres; | ||
972 | outh = var->xres; | ||
973 | } else { | ||
974 | outw = var->xres; | ||
975 | outh = var->yres; | ||
976 | } | ||
977 | } else { | ||
978 | outw = ovl->info.out_width; | ||
979 | outh = ovl->info.out_height; | ||
980 | } | ||
981 | |||
982 | if (init) { | ||
983 | posx = 0; | ||
984 | posy = 0; | ||
985 | } else { | ||
986 | posx = ovl->info.pos_x; | ||
987 | posy = ovl->info.pos_y; | ||
988 | } | ||
989 | |||
990 | r = omapfb_setup_overlay(fbi, ovl, posx, posy, outw, outh); | ||
991 | if (r) | ||
992 | goto err; | ||
993 | |||
994 | if (!init && ovl->manager) | ||
995 | ovl->manager->apply(ovl->manager); | ||
996 | } | ||
997 | return 0; | ||
998 | err: | ||
999 | DBG("apply_changes failed\n"); | ||
1000 | return r; | ||
1001 | } | ||
1002 | |||
1003 | /* checks var and eventually tweaks it to something supported, | ||
1004 | * DO NOT MODIFY PAR */ | ||
1005 | static int omapfb_check_var(struct fb_var_screeninfo *var, struct fb_info *fbi) | ||
1006 | { | ||
1007 | int r; | ||
1008 | |||
1009 | DBG("check_var(%d)\n", FB2OFB(fbi)->id); | ||
1010 | |||
1011 | r = check_fb_var(fbi, var); | ||
1012 | |||
1013 | return r; | ||
1014 | } | ||
1015 | |||
1016 | /* set the video mode according to info->var */ | ||
1017 | static int omapfb_set_par(struct fb_info *fbi) | ||
1018 | { | ||
1019 | int r; | ||
1020 | |||
1021 | DBG("set_par(%d)\n", FB2OFB(fbi)->id); | ||
1022 | |||
1023 | set_fb_fix(fbi); | ||
1024 | |||
1025 | r = setup_vrfb_rotation(fbi); | ||
1026 | if (r) | ||
1027 | return r; | ||
1028 | |||
1029 | r = omapfb_apply_changes(fbi, 0); | ||
1030 | |||
1031 | return r; | ||
1032 | } | ||
1033 | |||
1034 | static int omapfb_pan_display(struct fb_var_screeninfo *var, | ||
1035 | struct fb_info *fbi) | ||
1036 | { | ||
1037 | struct fb_var_screeninfo new_var; | ||
1038 | int r; | ||
1039 | |||
1040 | DBG("pan_display(%d)\n", FB2OFB(fbi)->id); | ||
1041 | |||
1042 | if (var->xoffset == fbi->var.xoffset && | ||
1043 | var->yoffset == fbi->var.yoffset) | ||
1044 | return 0; | ||
1045 | |||
1046 | new_var = fbi->var; | ||
1047 | new_var.xoffset = var->xoffset; | ||
1048 | new_var.yoffset = var->yoffset; | ||
1049 | |||
1050 | fbi->var = new_var; | ||
1051 | |||
1052 | r = omapfb_apply_changes(fbi, 0); | ||
1053 | |||
1054 | return r; | ||
1055 | } | ||
1056 | |||
1057 | static void mmap_user_open(struct vm_area_struct *vma) | ||
1058 | { | ||
1059 | struct omapfb_info *ofbi = (struct omapfb_info *)vma->vm_private_data; | ||
1060 | |||
1061 | atomic_inc(&ofbi->map_count); | ||
1062 | } | ||
1063 | |||
1064 | static void mmap_user_close(struct vm_area_struct *vma) | ||
1065 | { | ||
1066 | struct omapfb_info *ofbi = (struct omapfb_info *)vma->vm_private_data; | ||
1067 | |||
1068 | atomic_dec(&ofbi->map_count); | ||
1069 | } | ||
1070 | |||
1071 | static struct vm_operations_struct mmap_user_ops = { | ||
1072 | .open = mmap_user_open, | ||
1073 | .close = mmap_user_close, | ||
1074 | }; | ||
1075 | |||
1076 | static int omapfb_mmap(struct fb_info *fbi, struct vm_area_struct *vma) | ||
1077 | { | ||
1078 | struct omapfb_info *ofbi = FB2OFB(fbi); | ||
1079 | struct fb_fix_screeninfo *fix = &fbi->fix; | ||
1080 | unsigned long off; | ||
1081 | unsigned long start; | ||
1082 | u32 len; | ||
1083 | |||
1084 | if (vma->vm_end - vma->vm_start == 0) | ||
1085 | return 0; | ||
1086 | if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT)) | ||
1087 | return -EINVAL; | ||
1088 | off = vma->vm_pgoff << PAGE_SHIFT; | ||
1089 | |||
1090 | start = omapfb_get_region_paddr(ofbi); | ||
1091 | len = fix->smem_len; | ||
1092 | if (off >= len) | ||
1093 | return -EINVAL; | ||
1094 | if ((vma->vm_end - vma->vm_start + off) > len) | ||
1095 | return -EINVAL; | ||
1096 | |||
1097 | off += start; | ||
1098 | |||
1099 | DBG("user mmap region start %lx, len %d, off %lx\n", start, len, off); | ||
1100 | |||
1101 | vma->vm_pgoff = off >> PAGE_SHIFT; | ||
1102 | vma->vm_flags |= VM_IO | VM_RESERVED; | ||
1103 | vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot); | ||
1104 | vma->vm_ops = &mmap_user_ops; | ||
1105 | vma->vm_private_data = ofbi; | ||
1106 | if (io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT, | ||
1107 | vma->vm_end - vma->vm_start, vma->vm_page_prot)) | ||
1108 | return -EAGAIN; | ||
1109 | /* vm_ops.open won't be called for mmap itself. */ | ||
1110 | atomic_inc(&ofbi->map_count); | ||
1111 | return 0; | ||
1112 | } | ||
1113 | |||
1114 | /* Store a single color palette entry into a pseudo palette or the hardware | ||
1115 | * palette if one is available. For now we support only 16bpp and thus store | ||
1116 | * the entry only to the pseudo palette. | ||
1117 | */ | ||
1118 | static int _setcolreg(struct fb_info *fbi, u_int regno, u_int red, u_int green, | ||
1119 | u_int blue, u_int transp, int update_hw_pal) | ||
1120 | { | ||
1121 | /*struct omapfb_info *ofbi = FB2OFB(fbi);*/ | ||
1122 | /*struct omapfb2_device *fbdev = ofbi->fbdev;*/ | ||
1123 | struct fb_var_screeninfo *var = &fbi->var; | ||
1124 | int r = 0; | ||
1125 | |||
1126 | enum omapfb_color_format mode = OMAPFB_COLOR_RGB24U; /* XXX */ | ||
1127 | |||
1128 | /*switch (plane->color_mode) {*/ | ||
1129 | switch (mode) { | ||
1130 | case OMAPFB_COLOR_YUV422: | ||
1131 | case OMAPFB_COLOR_YUV420: | ||
1132 | case OMAPFB_COLOR_YUY422: | ||
1133 | r = -EINVAL; | ||
1134 | break; | ||
1135 | case OMAPFB_COLOR_CLUT_8BPP: | ||
1136 | case OMAPFB_COLOR_CLUT_4BPP: | ||
1137 | case OMAPFB_COLOR_CLUT_2BPP: | ||
1138 | case OMAPFB_COLOR_CLUT_1BPP: | ||
1139 | /* | ||
1140 | if (fbdev->ctrl->setcolreg) | ||
1141 | r = fbdev->ctrl->setcolreg(regno, red, green, blue, | ||
1142 | transp, update_hw_pal); | ||
1143 | */ | ||
1144 | /* Fallthrough */ | ||
1145 | r = -EINVAL; | ||
1146 | break; | ||
1147 | case OMAPFB_COLOR_RGB565: | ||
1148 | case OMAPFB_COLOR_RGB444: | ||
1149 | case OMAPFB_COLOR_RGB24P: | ||
1150 | case OMAPFB_COLOR_RGB24U: | ||
1151 | if (r != 0) | ||
1152 | break; | ||
1153 | |||
1154 | if (regno < 0) { | ||
1155 | r = -EINVAL; | ||
1156 | break; | ||
1157 | } | ||
1158 | |||
1159 | if (regno < 16) { | ||
1160 | u16 pal; | ||
1161 | pal = ((red >> (16 - var->red.length)) << | ||
1162 | var->red.offset) | | ||
1163 | ((green >> (16 - var->green.length)) << | ||
1164 | var->green.offset) | | ||
1165 | (blue >> (16 - var->blue.length)); | ||
1166 | ((u32 *)(fbi->pseudo_palette))[regno] = pal; | ||
1167 | } | ||
1168 | break; | ||
1169 | default: | ||
1170 | BUG(); | ||
1171 | } | ||
1172 | return r; | ||
1173 | } | ||
1174 | |||
1175 | static int omapfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, | ||
1176 | u_int transp, struct fb_info *info) | ||
1177 | { | ||
1178 | DBG("setcolreg\n"); | ||
1179 | |||
1180 | return _setcolreg(info, regno, red, green, blue, transp, 1); | ||
1181 | } | ||
1182 | |||
1183 | static int omapfb_setcmap(struct fb_cmap *cmap, struct fb_info *info) | ||
1184 | { | ||
1185 | int count, index, r; | ||
1186 | u16 *red, *green, *blue, *transp; | ||
1187 | u16 trans = 0xffff; | ||
1188 | |||
1189 | DBG("setcmap\n"); | ||
1190 | |||
1191 | red = cmap->red; | ||
1192 | green = cmap->green; | ||
1193 | blue = cmap->blue; | ||
1194 | transp = cmap->transp; | ||
1195 | index = cmap->start; | ||
1196 | |||
1197 | for (count = 0; count < cmap->len; count++) { | ||
1198 | if (transp) | ||
1199 | trans = *transp++; | ||
1200 | r = _setcolreg(info, index++, *red++, *green++, *blue++, trans, | ||
1201 | count == cmap->len - 1); | ||
1202 | if (r != 0) | ||
1203 | return r; | ||
1204 | } | ||
1205 | |||
1206 | return 0; | ||
1207 | } | ||
1208 | |||
1209 | static int omapfb_blank(int blank, struct fb_info *fbi) | ||
1210 | { | ||
1211 | struct omapfb_info *ofbi = FB2OFB(fbi); | ||
1212 | struct omapfb2_device *fbdev = ofbi->fbdev; | ||
1213 | struct omap_dss_device *display = fb2display(fbi); | ||
1214 | int do_update = 0; | ||
1215 | int r = 0; | ||
1216 | |||
1217 | omapfb_lock(fbdev); | ||
1218 | |||
1219 | switch (blank) { | ||
1220 | case FB_BLANK_UNBLANK: | ||
1221 | if (display->state != OMAP_DSS_DISPLAY_SUSPENDED) | ||
1222 | goto exit; | ||
1223 | |||
1224 | if (display->resume) | ||
1225 | r = display->resume(display); | ||
1226 | |||
1227 | if (r == 0 && display->get_update_mode && | ||
1228 | display->get_update_mode(display) == | ||
1229 | OMAP_DSS_UPDATE_MANUAL) | ||
1230 | do_update = 1; | ||
1231 | |||
1232 | break; | ||
1233 | |||
1234 | case FB_BLANK_NORMAL: | ||
1235 | /* FB_BLANK_NORMAL could be implemented. | ||
1236 | * Needs DSS additions. */ | ||
1237 | case FB_BLANK_VSYNC_SUSPEND: | ||
1238 | case FB_BLANK_HSYNC_SUSPEND: | ||
1239 | case FB_BLANK_POWERDOWN: | ||
1240 | if (display->state != OMAP_DSS_DISPLAY_ACTIVE) | ||
1241 | goto exit; | ||
1242 | |||
1243 | if (display->suspend) | ||
1244 | r = display->suspend(display); | ||
1245 | |||
1246 | break; | ||
1247 | |||
1248 | default: | ||
1249 | r = -EINVAL; | ||
1250 | } | ||
1251 | |||
1252 | exit: | ||
1253 | omapfb_unlock(fbdev); | ||
1254 | |||
1255 | if (r == 0 && do_update && display->update) { | ||
1256 | u16 w, h; | ||
1257 | display->get_resolution(display, &w, &h); | ||
1258 | |||
1259 | r = display->update(display, 0, 0, w, h); | ||
1260 | } | ||
1261 | |||
1262 | return r; | ||
1263 | } | ||
1264 | |||
1265 | #if 0 | ||
1266 | /* XXX fb_read and fb_write are needed for VRFB */ | ||
1267 | ssize_t omapfb_write(struct fb_info *info, const char __user *buf, | ||
1268 | size_t count, loff_t *ppos) | ||
1269 | { | ||
1270 | DBG("omapfb_write %d, %lu\n", count, (unsigned long)*ppos); | ||
1271 | /* XXX needed for VRFB */ | ||
1272 | return count; | ||
1273 | } | ||
1274 | #endif | ||
1275 | |||
1276 | static struct fb_ops omapfb_ops = { | ||
1277 | .owner = THIS_MODULE, | ||
1278 | .fb_open = omapfb_open, | ||
1279 | .fb_release = omapfb_release, | ||
1280 | .fb_fillrect = cfb_fillrect, | ||
1281 | .fb_copyarea = cfb_copyarea, | ||
1282 | .fb_imageblit = cfb_imageblit, | ||
1283 | .fb_blank = omapfb_blank, | ||
1284 | .fb_ioctl = omapfb_ioctl, | ||
1285 | .fb_check_var = omapfb_check_var, | ||
1286 | .fb_set_par = omapfb_set_par, | ||
1287 | .fb_pan_display = omapfb_pan_display, | ||
1288 | .fb_mmap = omapfb_mmap, | ||
1289 | .fb_setcolreg = omapfb_setcolreg, | ||
1290 | .fb_setcmap = omapfb_setcmap, | ||
1291 | /*.fb_write = omapfb_write,*/ | ||
1292 | }; | ||
1293 | |||
1294 | static void omapfb_free_fbmem(struct fb_info *fbi) | ||
1295 | { | ||
1296 | struct omapfb_info *ofbi = FB2OFB(fbi); | ||
1297 | struct omapfb2_device *fbdev = ofbi->fbdev; | ||
1298 | struct omapfb2_mem_region *rg; | ||
1299 | |||
1300 | rg = &ofbi->region; | ||
1301 | |||
1302 | if (rg->paddr) | ||
1303 | if (omap_vram_free(rg->paddr, rg->size)) | ||
1304 | dev_err(fbdev->dev, "VRAM FREE failed\n"); | ||
1305 | |||
1306 | if (rg->vaddr) | ||
1307 | iounmap(rg->vaddr); | ||
1308 | |||
1309 | if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) { | ||
1310 | /* unmap the 0 angle rotation */ | ||
1311 | if (rg->vrfb.vaddr[0]) { | ||
1312 | iounmap(rg->vrfb.vaddr[0]); | ||
1313 | omap_vrfb_release_ctx(&rg->vrfb); | ||
1314 | } | ||
1315 | } | ||
1316 | |||
1317 | rg->vaddr = NULL; | ||
1318 | rg->paddr = 0; | ||
1319 | rg->alloc = 0; | ||
1320 | rg->size = 0; | ||
1321 | } | ||
1322 | |||
1323 | static void clear_fb_info(struct fb_info *fbi) | ||
1324 | { | ||
1325 | memset(&fbi->var, 0, sizeof(fbi->var)); | ||
1326 | memset(&fbi->fix, 0, sizeof(fbi->fix)); | ||
1327 | strlcpy(fbi->fix.id, MODULE_NAME, sizeof(fbi->fix.id)); | ||
1328 | } | ||
1329 | |||
1330 | static int omapfb_free_all_fbmem(struct omapfb2_device *fbdev) | ||
1331 | { | ||
1332 | int i; | ||
1333 | |||
1334 | DBG("free all fbmem\n"); | ||
1335 | |||
1336 | for (i = 0; i < fbdev->num_fbs; i++) { | ||
1337 | struct fb_info *fbi = fbdev->fbs[i]; | ||
1338 | omapfb_free_fbmem(fbi); | ||
1339 | clear_fb_info(fbi); | ||
1340 | } | ||
1341 | |||
1342 | return 0; | ||
1343 | } | ||
1344 | |||
1345 | static int omapfb_alloc_fbmem(struct fb_info *fbi, unsigned long size, | ||
1346 | unsigned long paddr) | ||
1347 | { | ||
1348 | struct omapfb_info *ofbi = FB2OFB(fbi); | ||
1349 | struct omapfb2_device *fbdev = ofbi->fbdev; | ||
1350 | struct omapfb2_mem_region *rg; | ||
1351 | void __iomem *vaddr; | ||
1352 | int r; | ||
1353 | |||
1354 | rg = &ofbi->region; | ||
1355 | memset(rg, 0, sizeof(*rg)); | ||
1356 | |||
1357 | size = PAGE_ALIGN(size); | ||
1358 | |||
1359 | if (!paddr) { | ||
1360 | DBG("allocating %lu bytes for fb %d\n", size, ofbi->id); | ||
1361 | r = omap_vram_alloc(OMAP_VRAM_MEMTYPE_SDRAM, size, &paddr); | ||
1362 | } else { | ||
1363 | DBG("reserving %lu bytes at %lx for fb %d\n", size, paddr, | ||
1364 | ofbi->id); | ||
1365 | r = omap_vram_reserve(paddr, size); | ||
1366 | } | ||
1367 | |||
1368 | if (r) { | ||
1369 | dev_err(fbdev->dev, "failed to allocate framebuffer\n"); | ||
1370 | return -ENOMEM; | ||
1371 | } | ||
1372 | |||
1373 | if (ofbi->rotation_type != OMAP_DSS_ROT_VRFB) { | ||
1374 | vaddr = ioremap_wc(paddr, size); | ||
1375 | |||
1376 | if (!vaddr) { | ||
1377 | dev_err(fbdev->dev, "failed to ioremap framebuffer\n"); | ||
1378 | omap_vram_free(paddr, size); | ||
1379 | return -ENOMEM; | ||
1380 | } | ||
1381 | |||
1382 | DBG("allocated VRAM paddr %lx, vaddr %p\n", paddr, vaddr); | ||
1383 | } else { | ||
1384 | r = omap_vrfb_request_ctx(&rg->vrfb); | ||
1385 | if (r) { | ||
1386 | dev_err(fbdev->dev, "vrfb create ctx failed\n"); | ||
1387 | return r; | ||
1388 | } | ||
1389 | |||
1390 | vaddr = NULL; | ||
1391 | } | ||
1392 | |||
1393 | rg->paddr = paddr; | ||
1394 | rg->vaddr = vaddr; | ||
1395 | rg->size = size; | ||
1396 | rg->alloc = 1; | ||
1397 | |||
1398 | return 0; | ||
1399 | } | ||
1400 | |||
1401 | /* allocate fbmem using display resolution as reference */ | ||
1402 | static int omapfb_alloc_fbmem_display(struct fb_info *fbi, unsigned long size, | ||
1403 | unsigned long paddr) | ||
1404 | { | ||
1405 | struct omapfb_info *ofbi = FB2OFB(fbi); | ||
1406 | struct omap_dss_device *display; | ||
1407 | int bytespp; | ||
1408 | |||
1409 | display = fb2display(fbi); | ||
1410 | |||
1411 | if (!display) | ||
1412 | return 0; | ||
1413 | |||
1414 | switch (display->get_recommended_bpp(display)) { | ||
1415 | case 16: | ||
1416 | bytespp = 2; | ||
1417 | break; | ||
1418 | case 24: | ||
1419 | bytespp = 4; | ||
1420 | break; | ||
1421 | default: | ||
1422 | bytespp = 4; | ||
1423 | break; | ||
1424 | } | ||
1425 | |||
1426 | if (!size) { | ||
1427 | u16 w, h; | ||
1428 | |||
1429 | display->get_resolution(display, &w, &h); | ||
1430 | |||
1431 | if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) { | ||
1432 | size = max(omap_vrfb_min_phys_size(w, h, bytespp), | ||
1433 | omap_vrfb_min_phys_size(h, w, bytespp)); | ||
1434 | |||
1435 | DBG("adjusting fb mem size for VRFB, %u -> %lu\n", | ||
1436 | w * h * bytespp, size); | ||
1437 | } else { | ||
1438 | size = w * h * bytespp; | ||
1439 | } | ||
1440 | } | ||
1441 | |||
1442 | if (!size) | ||
1443 | return 0; | ||
1444 | |||
1445 | return omapfb_alloc_fbmem(fbi, size, paddr); | ||
1446 | } | ||
1447 | |||
1448 | static enum omap_color_mode fb_format_to_dss_mode(enum omapfb_color_format fmt) | ||
1449 | { | ||
1450 | enum omap_color_mode mode; | ||
1451 | |||
1452 | switch (fmt) { | ||
1453 | case OMAPFB_COLOR_RGB565: | ||
1454 | mode = OMAP_DSS_COLOR_RGB16; | ||
1455 | break; | ||
1456 | case OMAPFB_COLOR_YUV422: | ||
1457 | mode = OMAP_DSS_COLOR_YUV2; | ||
1458 | break; | ||
1459 | case OMAPFB_COLOR_CLUT_8BPP: | ||
1460 | mode = OMAP_DSS_COLOR_CLUT8; | ||
1461 | break; | ||
1462 | case OMAPFB_COLOR_CLUT_4BPP: | ||
1463 | mode = OMAP_DSS_COLOR_CLUT4; | ||
1464 | break; | ||
1465 | case OMAPFB_COLOR_CLUT_2BPP: | ||
1466 | mode = OMAP_DSS_COLOR_CLUT2; | ||
1467 | break; | ||
1468 | case OMAPFB_COLOR_CLUT_1BPP: | ||
1469 | mode = OMAP_DSS_COLOR_CLUT1; | ||
1470 | break; | ||
1471 | case OMAPFB_COLOR_RGB444: | ||
1472 | mode = OMAP_DSS_COLOR_RGB12U; | ||
1473 | break; | ||
1474 | case OMAPFB_COLOR_YUY422: | ||
1475 | mode = OMAP_DSS_COLOR_UYVY; | ||
1476 | break; | ||
1477 | case OMAPFB_COLOR_ARGB16: | ||
1478 | mode = OMAP_DSS_COLOR_ARGB16; | ||
1479 | break; | ||
1480 | case OMAPFB_COLOR_RGB24U: | ||
1481 | mode = OMAP_DSS_COLOR_RGB24U; | ||
1482 | break; | ||
1483 | case OMAPFB_COLOR_RGB24P: | ||
1484 | mode = OMAP_DSS_COLOR_RGB24P; | ||
1485 | break; | ||
1486 | case OMAPFB_COLOR_ARGB32: | ||
1487 | mode = OMAP_DSS_COLOR_ARGB32; | ||
1488 | break; | ||
1489 | case OMAPFB_COLOR_RGBA32: | ||
1490 | mode = OMAP_DSS_COLOR_RGBA32; | ||
1491 | break; | ||
1492 | case OMAPFB_COLOR_RGBX32: | ||
1493 | mode = OMAP_DSS_COLOR_RGBX32; | ||
1494 | break; | ||
1495 | default: | ||
1496 | mode = -EINVAL; | ||
1497 | } | ||
1498 | |||
1499 | return mode; | ||
1500 | } | ||
1501 | |||
1502 | static int omapfb_parse_vram_param(const char *param, int max_entries, | ||
1503 | unsigned long *sizes, unsigned long *paddrs) | ||
1504 | { | ||
1505 | int fbnum; | ||
1506 | unsigned long size; | ||
1507 | unsigned long paddr = 0; | ||
1508 | char *p, *start; | ||
1509 | |||
1510 | start = (char *)param; | ||
1511 | |||
1512 | while (1) { | ||
1513 | p = start; | ||
1514 | |||
1515 | fbnum = simple_strtoul(p, &p, 10); | ||
1516 | |||
1517 | if (p == param) | ||
1518 | return -EINVAL; | ||
1519 | |||
1520 | if (*p != ':') | ||
1521 | return -EINVAL; | ||
1522 | |||
1523 | if (fbnum >= max_entries) | ||
1524 | return -EINVAL; | ||
1525 | |||
1526 | size = memparse(p + 1, &p); | ||
1527 | |||
1528 | if (!size) | ||
1529 | return -EINVAL; | ||
1530 | |||
1531 | paddr = 0; | ||
1532 | |||
1533 | if (*p == '@') { | ||
1534 | paddr = simple_strtoul(p + 1, &p, 16); | ||
1535 | |||
1536 | if (!paddr) | ||
1537 | return -EINVAL; | ||
1538 | |||
1539 | } | ||
1540 | |||
1541 | paddrs[fbnum] = paddr; | ||
1542 | sizes[fbnum] = size; | ||
1543 | |||
1544 | if (*p == 0) | ||
1545 | break; | ||
1546 | |||
1547 | if (*p != ',') | ||
1548 | return -EINVAL; | ||
1549 | |||
1550 | ++p; | ||
1551 | |||
1552 | start = p; | ||
1553 | } | ||
1554 | |||
1555 | return 0; | ||
1556 | } | ||
1557 | |||
1558 | static int omapfb_allocate_all_fbs(struct omapfb2_device *fbdev) | ||
1559 | { | ||
1560 | int i, r; | ||
1561 | unsigned long vram_sizes[10]; | ||
1562 | unsigned long vram_paddrs[10]; | ||
1563 | |||
1564 | memset(&vram_sizes, 0, sizeof(vram_sizes)); | ||
1565 | memset(&vram_paddrs, 0, sizeof(vram_paddrs)); | ||
1566 | |||
1567 | if (def_vram && omapfb_parse_vram_param(def_vram, 10, | ||
1568 | vram_sizes, vram_paddrs)) { | ||
1569 | dev_err(fbdev->dev, "failed to parse vram parameter\n"); | ||
1570 | |||
1571 | memset(&vram_sizes, 0, sizeof(vram_sizes)); | ||
1572 | memset(&vram_paddrs, 0, sizeof(vram_paddrs)); | ||
1573 | } | ||
1574 | |||
1575 | if (fbdev->dev->platform_data) { | ||
1576 | struct omapfb_platform_data *opd; | ||
1577 | opd = fbdev->dev->platform_data; | ||
1578 | for (i = 0; i < opd->mem_desc.region_cnt; ++i) { | ||
1579 | if (!vram_sizes[i]) { | ||
1580 | unsigned long size; | ||
1581 | unsigned long paddr; | ||
1582 | |||
1583 | size = opd->mem_desc.region[i].size; | ||
1584 | paddr = opd->mem_desc.region[i].paddr; | ||
1585 | |||
1586 | vram_sizes[i] = size; | ||
1587 | vram_paddrs[i] = paddr; | ||
1588 | } | ||
1589 | } | ||
1590 | } | ||
1591 | |||
1592 | for (i = 0; i < fbdev->num_fbs; i++) { | ||
1593 | /* allocate memory automatically only for fb0, or if | ||
1594 | * excplicitly defined with vram or plat data option */ | ||
1595 | if (i == 0 || vram_sizes[i] != 0) { | ||
1596 | r = omapfb_alloc_fbmem_display(fbdev->fbs[i], | ||
1597 | vram_sizes[i], vram_paddrs[i]); | ||
1598 | |||
1599 | if (r) | ||
1600 | return r; | ||
1601 | } | ||
1602 | } | ||
1603 | |||
1604 | for (i = 0; i < fbdev->num_fbs; i++) { | ||
1605 | struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[i]); | ||
1606 | struct omapfb2_mem_region *rg; | ||
1607 | rg = &ofbi->region; | ||
1608 | |||
1609 | DBG("region%d phys %08x virt %p size=%lu\n", | ||
1610 | i, | ||
1611 | rg->paddr, | ||
1612 | rg->vaddr, | ||
1613 | rg->size); | ||
1614 | } | ||
1615 | |||
1616 | return 0; | ||
1617 | } | ||
1618 | |||
1619 | int omapfb_realloc_fbmem(struct fb_info *fbi, unsigned long size, int type) | ||
1620 | { | ||
1621 | struct omapfb_info *ofbi = FB2OFB(fbi); | ||
1622 | struct omapfb2_device *fbdev = ofbi->fbdev; | ||
1623 | struct omap_dss_device *display = fb2display(fbi); | ||
1624 | struct omapfb2_mem_region *rg = &ofbi->region; | ||
1625 | unsigned long old_size = rg->size; | ||
1626 | unsigned long old_paddr = rg->paddr; | ||
1627 | int old_type = rg->type; | ||
1628 | int r; | ||
1629 | |||
1630 | if (type > OMAPFB_MEMTYPE_MAX) | ||
1631 | return -EINVAL; | ||
1632 | |||
1633 | size = PAGE_ALIGN(size); | ||
1634 | |||
1635 | if (old_size == size && old_type == type) | ||
1636 | return 0; | ||
1637 | |||
1638 | if (display && display->sync) | ||
1639 | display->sync(display); | ||
1640 | |||
1641 | omapfb_free_fbmem(fbi); | ||
1642 | |||
1643 | if (size == 0) { | ||
1644 | clear_fb_info(fbi); | ||
1645 | return 0; | ||
1646 | } | ||
1647 | |||
1648 | r = omapfb_alloc_fbmem(fbi, size, 0); | ||
1649 | |||
1650 | if (r) { | ||
1651 | if (old_size) | ||
1652 | omapfb_alloc_fbmem(fbi, old_size, old_paddr); | ||
1653 | |||
1654 | if (rg->size == 0) | ||
1655 | clear_fb_info(fbi); | ||
1656 | |||
1657 | return r; | ||
1658 | } | ||
1659 | |||
1660 | if (old_size == size) | ||
1661 | return 0; | ||
1662 | |||
1663 | if (old_size == 0) { | ||
1664 | DBG("initializing fb %d\n", ofbi->id); | ||
1665 | r = omapfb_fb_init(fbdev, fbi); | ||
1666 | if (r) { | ||
1667 | DBG("omapfb_fb_init failed\n"); | ||
1668 | goto err; | ||
1669 | } | ||
1670 | r = omapfb_apply_changes(fbi, 1); | ||
1671 | if (r) { | ||
1672 | DBG("omapfb_apply_changes failed\n"); | ||
1673 | goto err; | ||
1674 | } | ||
1675 | } else { | ||
1676 | struct fb_var_screeninfo new_var; | ||
1677 | memcpy(&new_var, &fbi->var, sizeof(new_var)); | ||
1678 | r = check_fb_var(fbi, &new_var); | ||
1679 | if (r) | ||
1680 | goto err; | ||
1681 | memcpy(&fbi->var, &new_var, sizeof(fbi->var)); | ||
1682 | set_fb_fix(fbi); | ||
1683 | r = setup_vrfb_rotation(fbi); | ||
1684 | if (r) | ||
1685 | goto err; | ||
1686 | } | ||
1687 | |||
1688 | return 0; | ||
1689 | err: | ||
1690 | omapfb_free_fbmem(fbi); | ||
1691 | clear_fb_info(fbi); | ||
1692 | return r; | ||
1693 | } | ||
1694 | |||
1695 | /* initialize fb_info, var, fix to something sane based on the display */ | ||
1696 | static int omapfb_fb_init(struct omapfb2_device *fbdev, struct fb_info *fbi) | ||
1697 | { | ||
1698 | struct fb_var_screeninfo *var = &fbi->var; | ||
1699 | struct omap_dss_device *display = fb2display(fbi); | ||
1700 | struct omapfb_info *ofbi = FB2OFB(fbi); | ||
1701 | int r = 0; | ||
1702 | |||
1703 | fbi->fbops = &omapfb_ops; | ||
1704 | fbi->flags = FBINFO_FLAG_DEFAULT; | ||
1705 | fbi->pseudo_palette = fbdev->pseudo_palette; | ||
1706 | |||
1707 | if (ofbi->region.size == 0) { | ||
1708 | clear_fb_info(fbi); | ||
1709 | return 0; | ||
1710 | } | ||
1711 | |||
1712 | var->nonstd = 0; | ||
1713 | var->bits_per_pixel = 0; | ||
1714 | |||
1715 | var->rotate = def_rotate; | ||
1716 | |||
1717 | /* | ||
1718 | * Check if there is a default color format set in the board file, | ||
1719 | * and use this format instead the default deducted from the | ||
1720 | * display bpp. | ||
1721 | */ | ||
1722 | if (fbdev->dev->platform_data) { | ||
1723 | struct omapfb_platform_data *opd; | ||
1724 | int id = ofbi->id; | ||
1725 | |||
1726 | opd = fbdev->dev->platform_data; | ||
1727 | if (opd->mem_desc.region[id].format_used) { | ||
1728 | enum omap_color_mode mode; | ||
1729 | enum omapfb_color_format format; | ||
1730 | |||
1731 | format = opd->mem_desc.region[id].format; | ||
1732 | mode = fb_format_to_dss_mode(format); | ||
1733 | if (mode < 0) { | ||
1734 | r = mode; | ||
1735 | goto err; | ||
1736 | } | ||
1737 | r = dss_mode_to_fb_mode(mode, var); | ||
1738 | if (r < 0) | ||
1739 | goto err; | ||
1740 | } | ||
1741 | } | ||
1742 | |||
1743 | if (display) { | ||
1744 | u16 w, h; | ||
1745 | int rotation = (var->rotate + ofbi->rotation[0]) % 4; | ||
1746 | |||
1747 | display->get_resolution(display, &w, &h); | ||
1748 | |||
1749 | if (rotation == FB_ROTATE_CW || | ||
1750 | rotation == FB_ROTATE_CCW) { | ||
1751 | var->xres = h; | ||
1752 | var->yres = w; | ||
1753 | } else { | ||
1754 | var->xres = w; | ||
1755 | var->yres = h; | ||
1756 | } | ||
1757 | |||
1758 | var->xres_virtual = var->xres; | ||
1759 | var->yres_virtual = var->yres; | ||
1760 | |||
1761 | if (!var->bits_per_pixel) { | ||
1762 | switch (display->get_recommended_bpp(display)) { | ||
1763 | case 16: | ||
1764 | var->bits_per_pixel = 16; | ||
1765 | break; | ||
1766 | case 24: | ||
1767 | var->bits_per_pixel = 32; | ||
1768 | break; | ||
1769 | default: | ||
1770 | dev_err(fbdev->dev, "illegal display " | ||
1771 | "bpp\n"); | ||
1772 | return -EINVAL; | ||
1773 | } | ||
1774 | } | ||
1775 | } else { | ||
1776 | /* if there's no display, let's just guess some basic values */ | ||
1777 | var->xres = 320; | ||
1778 | var->yres = 240; | ||
1779 | var->xres_virtual = var->xres; | ||
1780 | var->yres_virtual = var->yres; | ||
1781 | if (!var->bits_per_pixel) | ||
1782 | var->bits_per_pixel = 16; | ||
1783 | } | ||
1784 | |||
1785 | r = check_fb_var(fbi, var); | ||
1786 | if (r) | ||
1787 | goto err; | ||
1788 | |||
1789 | set_fb_fix(fbi); | ||
1790 | r = setup_vrfb_rotation(fbi); | ||
1791 | if (r) | ||
1792 | goto err; | ||
1793 | |||
1794 | r = fb_alloc_cmap(&fbi->cmap, 256, 0); | ||
1795 | if (r) | ||
1796 | dev_err(fbdev->dev, "unable to allocate color map memory\n"); | ||
1797 | |||
1798 | err: | ||
1799 | return r; | ||
1800 | } | ||
1801 | |||
1802 | static void fbinfo_cleanup(struct omapfb2_device *fbdev, struct fb_info *fbi) | ||
1803 | { | ||
1804 | fb_dealloc_cmap(&fbi->cmap); | ||
1805 | } | ||
1806 | |||
1807 | |||
1808 | static void omapfb_free_resources(struct omapfb2_device *fbdev) | ||
1809 | { | ||
1810 | int i; | ||
1811 | |||
1812 | DBG("free_resources\n"); | ||
1813 | |||
1814 | if (fbdev == NULL) | ||
1815 | return; | ||
1816 | |||
1817 | for (i = 0; i < fbdev->num_fbs; i++) | ||
1818 | unregister_framebuffer(fbdev->fbs[i]); | ||
1819 | |||
1820 | /* free the reserved fbmem */ | ||
1821 | omapfb_free_all_fbmem(fbdev); | ||
1822 | |||
1823 | for (i = 0; i < fbdev->num_fbs; i++) { | ||
1824 | fbinfo_cleanup(fbdev, fbdev->fbs[i]); | ||
1825 | framebuffer_release(fbdev->fbs[i]); | ||
1826 | } | ||
1827 | |||
1828 | for (i = 0; i < fbdev->num_displays; i++) { | ||
1829 | if (fbdev->displays[i]->state != OMAP_DSS_DISPLAY_DISABLED) | ||
1830 | fbdev->displays[i]->disable(fbdev->displays[i]); | ||
1831 | |||
1832 | omap_dss_put_device(fbdev->displays[i]); | ||
1833 | } | ||
1834 | |||
1835 | dev_set_drvdata(fbdev->dev, NULL); | ||
1836 | kfree(fbdev); | ||
1837 | } | ||
1838 | |||
1839 | static int omapfb_create_framebuffers(struct omapfb2_device *fbdev) | ||
1840 | { | ||
1841 | int r, i; | ||
1842 | |||
1843 | fbdev->num_fbs = 0; | ||
1844 | |||
1845 | DBG("create %d framebuffers\n", CONFIG_FB_OMAP2_NUM_FBS); | ||
1846 | |||
1847 | /* allocate fb_infos */ | ||
1848 | for (i = 0; i < CONFIG_FB_OMAP2_NUM_FBS; i++) { | ||
1849 | struct fb_info *fbi; | ||
1850 | struct omapfb_info *ofbi; | ||
1851 | |||
1852 | fbi = framebuffer_alloc(sizeof(struct omapfb_info), | ||
1853 | fbdev->dev); | ||
1854 | |||
1855 | if (fbi == NULL) { | ||
1856 | dev_err(fbdev->dev, | ||
1857 | "unable to allocate memory for plane info\n"); | ||
1858 | return -ENOMEM; | ||
1859 | } | ||
1860 | |||
1861 | clear_fb_info(fbi); | ||
1862 | |||
1863 | fbdev->fbs[i] = fbi; | ||
1864 | |||
1865 | ofbi = FB2OFB(fbi); | ||
1866 | ofbi->fbdev = fbdev; | ||
1867 | ofbi->id = i; | ||
1868 | |||
1869 | /* assign these early, so that fb alloc can use them */ | ||
1870 | ofbi->rotation_type = def_vrfb ? OMAP_DSS_ROT_VRFB : | ||
1871 | OMAP_DSS_ROT_DMA; | ||
1872 | ofbi->mirror = def_mirror; | ||
1873 | |||
1874 | fbdev->num_fbs++; | ||
1875 | } | ||
1876 | |||
1877 | DBG("fb_infos allocated\n"); | ||
1878 | |||
1879 | /* assign overlays for the fbs */ | ||
1880 | for (i = 0; i < min(fbdev->num_fbs, fbdev->num_overlays); i++) { | ||
1881 | struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[i]); | ||
1882 | |||
1883 | ofbi->overlays[0] = fbdev->overlays[i]; | ||
1884 | ofbi->num_overlays = 1; | ||
1885 | } | ||
1886 | |||
1887 | /* allocate fb memories */ | ||
1888 | r = omapfb_allocate_all_fbs(fbdev); | ||
1889 | if (r) { | ||
1890 | dev_err(fbdev->dev, "failed to allocate fbmem\n"); | ||
1891 | return r; | ||
1892 | } | ||
1893 | |||
1894 | DBG("fbmems allocated\n"); | ||
1895 | |||
1896 | /* setup fb_infos */ | ||
1897 | for (i = 0; i < fbdev->num_fbs; i++) { | ||
1898 | r = omapfb_fb_init(fbdev, fbdev->fbs[i]); | ||
1899 | if (r) { | ||
1900 | dev_err(fbdev->dev, "failed to setup fb_info\n"); | ||
1901 | return r; | ||
1902 | } | ||
1903 | } | ||
1904 | |||
1905 | DBG("fb_infos initialized\n"); | ||
1906 | |||
1907 | for (i = 0; i < fbdev->num_fbs; i++) { | ||
1908 | r = register_framebuffer(fbdev->fbs[i]); | ||
1909 | if (r != 0) { | ||
1910 | dev_err(fbdev->dev, | ||
1911 | "registering framebuffer %d failed\n", i); | ||
1912 | return r; | ||
1913 | } | ||
1914 | } | ||
1915 | |||
1916 | DBG("framebuffers registered\n"); | ||
1917 | |||
1918 | for (i = 0; i < fbdev->num_fbs; i++) { | ||
1919 | r = omapfb_apply_changes(fbdev->fbs[i], 1); | ||
1920 | if (r) { | ||
1921 | dev_err(fbdev->dev, "failed to change mode\n"); | ||
1922 | return r; | ||
1923 | } | ||
1924 | } | ||
1925 | |||
1926 | DBG("create sysfs for fbs\n"); | ||
1927 | r = omapfb_create_sysfs(fbdev); | ||
1928 | if (r) { | ||
1929 | dev_err(fbdev->dev, "failed to create sysfs entries\n"); | ||
1930 | return r; | ||
1931 | } | ||
1932 | |||
1933 | /* Enable fb0 */ | ||
1934 | if (fbdev->num_fbs > 0) { | ||
1935 | struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[0]); | ||
1936 | |||
1937 | if (ofbi->num_overlays > 0) { | ||
1938 | struct omap_overlay *ovl = ofbi->overlays[0]; | ||
1939 | |||
1940 | r = omapfb_overlay_enable(ovl, 1); | ||
1941 | |||
1942 | if (r) { | ||
1943 | dev_err(fbdev->dev, | ||
1944 | "failed to enable overlay\n"); | ||
1945 | return r; | ||
1946 | } | ||
1947 | } | ||
1948 | } | ||
1949 | |||
1950 | DBG("create_framebuffers done\n"); | ||
1951 | |||
1952 | return 0; | ||
1953 | } | ||
1954 | |||
1955 | static int omapfb_mode_to_timings(const char *mode_str, | ||
1956 | struct omap_video_timings *timings, u8 *bpp) | ||
1957 | { | ||
1958 | struct fb_info fbi; | ||
1959 | struct fb_var_screeninfo var; | ||
1960 | struct fb_ops fbops; | ||
1961 | int r; | ||
1962 | |||
1963 | #ifdef CONFIG_OMAP2_DSS_VENC | ||
1964 | if (strcmp(mode_str, "pal") == 0) { | ||
1965 | *timings = omap_dss_pal_timings; | ||
1966 | *bpp = 0; | ||
1967 | return 0; | ||
1968 | } else if (strcmp(mode_str, "ntsc") == 0) { | ||
1969 | *timings = omap_dss_ntsc_timings; | ||
1970 | *bpp = 0; | ||
1971 | return 0; | ||
1972 | } | ||
1973 | #endif | ||
1974 | |||
1975 | /* this is quite a hack, but I wanted to use the modedb and for | ||
1976 | * that we need fb_info and var, so we create dummy ones */ | ||
1977 | |||
1978 | memset(&fbi, 0, sizeof(fbi)); | ||
1979 | memset(&var, 0, sizeof(var)); | ||
1980 | memset(&fbops, 0, sizeof(fbops)); | ||
1981 | fbi.fbops = &fbops; | ||
1982 | |||
1983 | r = fb_find_mode(&var, &fbi, mode_str, NULL, 0, NULL, 24); | ||
1984 | |||
1985 | if (r != 0) { | ||
1986 | timings->pixel_clock = PICOS2KHZ(var.pixclock); | ||
1987 | timings->hfp = var.left_margin; | ||
1988 | timings->hbp = var.right_margin; | ||
1989 | timings->vfp = var.upper_margin; | ||
1990 | timings->vbp = var.lower_margin; | ||
1991 | timings->hsw = var.hsync_len; | ||
1992 | timings->vsw = var.vsync_len; | ||
1993 | timings->x_res = var.xres; | ||
1994 | timings->y_res = var.yres; | ||
1995 | |||
1996 | switch (var.bits_per_pixel) { | ||
1997 | case 16: | ||
1998 | *bpp = 16; | ||
1999 | break; | ||
2000 | case 24: | ||
2001 | case 32: | ||
2002 | default: | ||
2003 | *bpp = 24; | ||
2004 | break; | ||
2005 | } | ||
2006 | |||
2007 | return 0; | ||
2008 | } else { | ||
2009 | return -EINVAL; | ||
2010 | } | ||
2011 | } | ||
2012 | |||
2013 | static int omapfb_set_def_mode(struct omap_dss_device *display, char *mode_str) | ||
2014 | { | ||
2015 | int r; | ||
2016 | u8 bpp; | ||
2017 | struct omap_video_timings timings; | ||
2018 | |||
2019 | r = omapfb_mode_to_timings(mode_str, &timings, &bpp); | ||
2020 | if (r) | ||
2021 | return r; | ||
2022 | |||
2023 | display->panel.recommended_bpp = bpp; | ||
2024 | |||
2025 | if (!display->check_timings || !display->set_timings) | ||
2026 | return -EINVAL; | ||
2027 | |||
2028 | r = display->check_timings(display, &timings); | ||
2029 | if (r) | ||
2030 | return r; | ||
2031 | |||
2032 | display->set_timings(display, &timings); | ||
2033 | |||
2034 | return 0; | ||
2035 | } | ||
2036 | |||
2037 | static int omapfb_parse_def_modes(struct omapfb2_device *fbdev) | ||
2038 | { | ||
2039 | char *str, *options, *this_opt; | ||
2040 | int r = 0; | ||
2041 | |||
2042 | str = kmalloc(strlen(def_mode) + 1, GFP_KERNEL); | ||
2043 | strcpy(str, def_mode); | ||
2044 | options = str; | ||
2045 | |||
2046 | while (!r && (this_opt = strsep(&options, ",")) != NULL) { | ||
2047 | char *p, *display_str, *mode_str; | ||
2048 | struct omap_dss_device *display; | ||
2049 | int i; | ||
2050 | |||
2051 | p = strchr(this_opt, ':'); | ||
2052 | if (!p) { | ||
2053 | r = -EINVAL; | ||
2054 | break; | ||
2055 | } | ||
2056 | |||
2057 | *p = 0; | ||
2058 | display_str = this_opt; | ||
2059 | mode_str = p + 1; | ||
2060 | |||
2061 | display = NULL; | ||
2062 | for (i = 0; i < fbdev->num_displays; ++i) { | ||
2063 | if (strcmp(fbdev->displays[i]->name, | ||
2064 | display_str) == 0) { | ||
2065 | display = fbdev->displays[i]; | ||
2066 | break; | ||
2067 | } | ||
2068 | } | ||
2069 | |||
2070 | if (!display) { | ||
2071 | r = -EINVAL; | ||
2072 | break; | ||
2073 | } | ||
2074 | |||
2075 | r = omapfb_set_def_mode(display, mode_str); | ||
2076 | if (r) | ||
2077 | break; | ||
2078 | } | ||
2079 | |||
2080 | kfree(str); | ||
2081 | |||
2082 | return r; | ||
2083 | } | ||
2084 | |||
2085 | static int omapfb_probe(struct platform_device *pdev) | ||
2086 | { | ||
2087 | struct omapfb2_device *fbdev = NULL; | ||
2088 | int r = 0; | ||
2089 | int i; | ||
2090 | struct omap_overlay *ovl; | ||
2091 | struct omap_dss_device *def_display; | ||
2092 | struct omap_dss_device *dssdev; | ||
2093 | |||
2094 | DBG("omapfb_probe\n"); | ||
2095 | |||
2096 | if (pdev->num_resources != 0) { | ||
2097 | dev_err(&pdev->dev, "probed for an unknown device\n"); | ||
2098 | r = -ENODEV; | ||
2099 | goto err0; | ||
2100 | } | ||
2101 | |||
2102 | fbdev = kzalloc(sizeof(struct omapfb2_device), GFP_KERNEL); | ||
2103 | if (fbdev == NULL) { | ||
2104 | r = -ENOMEM; | ||
2105 | goto err0; | ||
2106 | } | ||
2107 | |||
2108 | mutex_init(&fbdev->mtx); | ||
2109 | |||
2110 | fbdev->dev = &pdev->dev; | ||
2111 | platform_set_drvdata(pdev, fbdev); | ||
2112 | |||
2113 | fbdev->num_displays = 0; | ||
2114 | dssdev = NULL; | ||
2115 | for_each_dss_dev(dssdev) { | ||
2116 | omap_dss_get_device(dssdev); | ||
2117 | fbdev->displays[fbdev->num_displays++] = dssdev; | ||
2118 | } | ||
2119 | |||
2120 | if (fbdev->num_displays == 0) { | ||
2121 | dev_err(&pdev->dev, "no displays\n"); | ||
2122 | r = -EINVAL; | ||
2123 | goto cleanup; | ||
2124 | } | ||
2125 | |||
2126 | fbdev->num_overlays = omap_dss_get_num_overlays(); | ||
2127 | for (i = 0; i < fbdev->num_overlays; i++) | ||
2128 | fbdev->overlays[i] = omap_dss_get_overlay(i); | ||
2129 | |||
2130 | fbdev->num_managers = omap_dss_get_num_overlay_managers(); | ||
2131 | for (i = 0; i < fbdev->num_managers; i++) | ||
2132 | fbdev->managers[i] = omap_dss_get_overlay_manager(i); | ||
2133 | |||
2134 | if (def_mode && strlen(def_mode) > 0) { | ||
2135 | if (omapfb_parse_def_modes(fbdev)) | ||
2136 | dev_warn(&pdev->dev, "cannot parse default modes\n"); | ||
2137 | } | ||
2138 | |||
2139 | r = omapfb_create_framebuffers(fbdev); | ||
2140 | if (r) | ||
2141 | goto cleanup; | ||
2142 | |||
2143 | for (i = 0; i < fbdev->num_managers; i++) { | ||
2144 | struct omap_overlay_manager *mgr; | ||
2145 | mgr = fbdev->managers[i]; | ||
2146 | r = mgr->apply(mgr); | ||
2147 | if (r) | ||
2148 | dev_warn(fbdev->dev, "failed to apply dispc config\n"); | ||
2149 | } | ||
2150 | |||
2151 | DBG("mgr->apply'ed\n"); | ||
2152 | |||
2153 | /* gfx overlay should be the default one. find a display | ||
2154 | * connected to that, and use it as default display */ | ||
2155 | ovl = omap_dss_get_overlay(0); | ||
2156 | if (ovl->manager && ovl->manager->device) { | ||
2157 | def_display = ovl->manager->device; | ||
2158 | } else { | ||
2159 | dev_warn(&pdev->dev, "cannot find default display\n"); | ||
2160 | def_display = NULL; | ||
2161 | } | ||
2162 | |||
2163 | if (def_display) { | ||
2164 | #ifndef CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE | ||
2165 | u16 w, h; | ||
2166 | #endif | ||
2167 | r = def_display->enable(def_display); | ||
2168 | if (r) | ||
2169 | dev_warn(fbdev->dev, "Failed to enable display '%s'\n", | ||
2170 | def_display->name); | ||
2171 | |||
2172 | /* set the update mode */ | ||
2173 | if (def_display->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE) { | ||
2174 | #ifdef CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE | ||
2175 | if (def_display->enable_te) | ||
2176 | def_display->enable_te(def_display, 1); | ||
2177 | if (def_display->set_update_mode) | ||
2178 | def_display->set_update_mode(def_display, | ||
2179 | OMAP_DSS_UPDATE_AUTO); | ||
2180 | #else /* MANUAL_UPDATE */ | ||
2181 | if (def_display->enable_te) | ||
2182 | def_display->enable_te(def_display, 0); | ||
2183 | if (def_display->set_update_mode) | ||
2184 | def_display->set_update_mode(def_display, | ||
2185 | OMAP_DSS_UPDATE_MANUAL); | ||
2186 | |||
2187 | def_display->get_resolution(def_display, &w, &h); | ||
2188 | def_display->update(def_display, 0, 0, w, h); | ||
2189 | #endif | ||
2190 | } else { | ||
2191 | if (def_display->set_update_mode) | ||
2192 | def_display->set_update_mode(def_display, | ||
2193 | OMAP_DSS_UPDATE_AUTO); | ||
2194 | } | ||
2195 | } | ||
2196 | |||
2197 | return 0; | ||
2198 | |||
2199 | cleanup: | ||
2200 | omapfb_free_resources(fbdev); | ||
2201 | err0: | ||
2202 | dev_err(&pdev->dev, "failed to setup omapfb\n"); | ||
2203 | return r; | ||
2204 | } | ||
2205 | |||
2206 | static int omapfb_remove(struct platform_device *pdev) | ||
2207 | { | ||
2208 | struct omapfb2_device *fbdev = platform_get_drvdata(pdev); | ||
2209 | |||
2210 | /* FIXME: wait till completion of pending events */ | ||
2211 | |||
2212 | omapfb_remove_sysfs(fbdev); | ||
2213 | |||
2214 | omapfb_free_resources(fbdev); | ||
2215 | |||
2216 | return 0; | ||
2217 | } | ||
2218 | |||
2219 | static struct platform_driver omapfb_driver = { | ||
2220 | .probe = omapfb_probe, | ||
2221 | .remove = omapfb_remove, | ||
2222 | .driver = { | ||
2223 | .name = "omapfb", | ||
2224 | .owner = THIS_MODULE, | ||
2225 | }, | ||
2226 | }; | ||
2227 | |||
2228 | static int __init omapfb_init(void) | ||
2229 | { | ||
2230 | DBG("omapfb_init\n"); | ||
2231 | |||
2232 | if (platform_driver_register(&omapfb_driver)) { | ||
2233 | printk(KERN_ERR "failed to register omapfb driver\n"); | ||
2234 | return -ENODEV; | ||
2235 | } | ||
2236 | |||
2237 | return 0; | ||
2238 | } | ||
2239 | |||
2240 | static void __exit omapfb_exit(void) | ||
2241 | { | ||
2242 | DBG("omapfb_exit\n"); | ||
2243 | platform_driver_unregister(&omapfb_driver); | ||
2244 | } | ||
2245 | |||
2246 | module_param_named(mode, def_mode, charp, 0); | ||
2247 | module_param_named(vram, def_vram, charp, 0); | ||
2248 | module_param_named(rotate, def_rotate, int, 0); | ||
2249 | module_param_named(vrfb, def_vrfb, bool, 0); | ||
2250 | module_param_named(mirror, def_mirror, bool, 0); | ||
2251 | |||
2252 | /* late_initcall to let panel/ctrl drivers loaded first. | ||
2253 | * I guess better option would be a more dynamic approach, | ||
2254 | * so that omapfb reacts to new panels when they are loaded */ | ||
2255 | late_initcall(omapfb_init); | ||
2256 | /*module_init(omapfb_init);*/ | ||
2257 | module_exit(omapfb_exit); | ||
2258 | |||
2259 | MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@nokia.com>"); | ||
2260 | MODULE_DESCRIPTION("OMAP2/3 Framebuffer"); | ||
2261 | MODULE_LICENSE("GPL v2"); | ||
diff --git a/drivers/video/omap2/omapfb/omapfb-sysfs.c b/drivers/video/omap2/omapfb/omapfb-sysfs.c new file mode 100644 index 000000000000..62bb88f5c192 --- /dev/null +++ b/drivers/video/omap2/omapfb/omapfb-sysfs.c | |||
@@ -0,0 +1,507 @@ | |||
1 | /* | ||
2 | * linux/drivers/video/omap2/omapfb-sysfs.c | ||
3 | * | ||
4 | * Copyright (C) 2008 Nokia Corporation | ||
5 | * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> | ||
6 | * | ||
7 | * Some code and ideas taken from drivers/video/omap/ driver | ||
8 | * by Imre Deak. | ||
9 | * | ||
10 | * This program is free software; you can redistribute it and/or modify it | ||
11 | * under the terms of the GNU General Public License version 2 as published by | ||
12 | * the Free Software Foundation. | ||
13 | * | ||
14 | * This program is distributed in the hope that it will be useful, but WITHOUT | ||
15 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | ||
16 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for | ||
17 | * more details. | ||
18 | * | ||
19 | * You should have received a copy of the GNU General Public License along with | ||
20 | * this program. If not, see <http://www.gnu.org/licenses/>. | ||
21 | */ | ||
22 | |||
23 | #include <linux/fb.h> | ||
24 | #include <linux/sysfs.h> | ||
25 | #include <linux/device.h> | ||
26 | #include <linux/uaccess.h> | ||
27 | #include <linux/platform_device.h> | ||
28 | #include <linux/kernel.h> | ||
29 | #include <linux/mm.h> | ||
30 | #include <linux/omapfb.h> | ||
31 | |||
32 | #include <plat/display.h> | ||
33 | #include <plat/vrfb.h> | ||
34 | |||
35 | #include "omapfb.h" | ||
36 | |||
37 | static ssize_t show_rotate_type(struct device *dev, | ||
38 | struct device_attribute *attr, char *buf) | ||
39 | { | ||
40 | struct fb_info *fbi = dev_get_drvdata(dev); | ||
41 | struct omapfb_info *ofbi = FB2OFB(fbi); | ||
42 | |||
43 | return snprintf(buf, PAGE_SIZE, "%d\n", ofbi->rotation_type); | ||
44 | } | ||
45 | |||
46 | static ssize_t store_rotate_type(struct device *dev, | ||
47 | struct device_attribute *attr, | ||
48 | const char *buf, size_t count) | ||
49 | { | ||
50 | struct fb_info *fbi = dev_get_drvdata(dev); | ||
51 | struct omapfb_info *ofbi = FB2OFB(fbi); | ||
52 | enum omap_dss_rotation_type rot_type; | ||
53 | int r; | ||
54 | |||
55 | rot_type = simple_strtoul(buf, NULL, 0); | ||
56 | |||
57 | if (rot_type != OMAP_DSS_ROT_DMA && rot_type != OMAP_DSS_ROT_VRFB) | ||
58 | return -EINVAL; | ||
59 | |||
60 | lock_fb_info(fbi); | ||
61 | |||
62 | r = 0; | ||
63 | if (rot_type == ofbi->rotation_type) | ||
64 | goto out; | ||
65 | |||
66 | if (ofbi->region.size) { | ||
67 | r = -EBUSY; | ||
68 | goto out; | ||
69 | } | ||
70 | |||
71 | ofbi->rotation_type = rot_type; | ||
72 | |||
73 | /* | ||
74 | * Since the VRAM for this FB is not allocated at the moment we don't | ||
75 | * need to do any further parameter checking at this point. | ||
76 | */ | ||
77 | out: | ||
78 | unlock_fb_info(fbi); | ||
79 | |||
80 | return r ? r : count; | ||
81 | } | ||
82 | |||
83 | |||
84 | static ssize_t show_mirror(struct device *dev, | ||
85 | struct device_attribute *attr, char *buf) | ||
86 | { | ||
87 | struct fb_info *fbi = dev_get_drvdata(dev); | ||
88 | struct omapfb_info *ofbi = FB2OFB(fbi); | ||
89 | |||
90 | return snprintf(buf, PAGE_SIZE, "%d\n", ofbi->mirror); | ||
91 | } | ||
92 | |||
93 | static ssize_t store_mirror(struct device *dev, | ||
94 | struct device_attribute *attr, | ||
95 | const char *buf, size_t count) | ||
96 | { | ||
97 | struct fb_info *fbi = dev_get_drvdata(dev); | ||
98 | struct omapfb_info *ofbi = FB2OFB(fbi); | ||
99 | bool mirror; | ||
100 | int r; | ||
101 | struct fb_var_screeninfo new_var; | ||
102 | |||
103 | mirror = simple_strtoul(buf, NULL, 0); | ||
104 | |||
105 | if (mirror != 0 && mirror != 1) | ||
106 | return -EINVAL; | ||
107 | |||
108 | lock_fb_info(fbi); | ||
109 | |||
110 | ofbi->mirror = mirror; | ||
111 | |||
112 | memcpy(&new_var, &fbi->var, sizeof(new_var)); | ||
113 | r = check_fb_var(fbi, &new_var); | ||
114 | if (r) | ||
115 | goto out; | ||
116 | memcpy(&fbi->var, &new_var, sizeof(fbi->var)); | ||
117 | |||
118 | set_fb_fix(fbi); | ||
119 | |||
120 | r = omapfb_apply_changes(fbi, 0); | ||
121 | if (r) | ||
122 | goto out; | ||
123 | |||
124 | r = count; | ||
125 | out: | ||
126 | unlock_fb_info(fbi); | ||
127 | |||
128 | return r; | ||
129 | } | ||
130 | |||
131 | static ssize_t show_overlays(struct device *dev, | ||
132 | struct device_attribute *attr, char *buf) | ||
133 | { | ||
134 | struct fb_info *fbi = dev_get_drvdata(dev); | ||
135 | struct omapfb_info *ofbi = FB2OFB(fbi); | ||
136 | struct omapfb2_device *fbdev = ofbi->fbdev; | ||
137 | ssize_t l = 0; | ||
138 | int t; | ||
139 | |||
140 | omapfb_lock(fbdev); | ||
141 | lock_fb_info(fbi); | ||
142 | |||
143 | for (t = 0; t < ofbi->num_overlays; t++) { | ||
144 | struct omap_overlay *ovl = ofbi->overlays[t]; | ||
145 | int ovlnum; | ||
146 | |||
147 | for (ovlnum = 0; ovlnum < fbdev->num_overlays; ++ovlnum) | ||
148 | if (ovl == fbdev->overlays[ovlnum]) | ||
149 | break; | ||
150 | |||
151 | l += snprintf(buf + l, PAGE_SIZE - l, "%s%d", | ||
152 | t == 0 ? "" : ",", ovlnum); | ||
153 | } | ||
154 | |||
155 | l += snprintf(buf + l, PAGE_SIZE - l, "\n"); | ||
156 | |||
157 | unlock_fb_info(fbi); | ||
158 | omapfb_unlock(fbdev); | ||
159 | |||
160 | return l; | ||
161 | } | ||
162 | |||
163 | static struct omapfb_info *get_overlay_fb(struct omapfb2_device *fbdev, | ||
164 | struct omap_overlay *ovl) | ||
165 | { | ||
166 | int i, t; | ||
167 | |||
168 | for (i = 0; i < fbdev->num_fbs; i++) { | ||
169 | struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[i]); | ||
170 | |||
171 | for (t = 0; t < ofbi->num_overlays; t++) { | ||
172 | if (ofbi->overlays[t] == ovl) | ||
173 | return ofbi; | ||
174 | } | ||
175 | } | ||
176 | |||
177 | return NULL; | ||
178 | } | ||
179 | |||
180 | static ssize_t store_overlays(struct device *dev, struct device_attribute *attr, | ||
181 | const char *buf, size_t count) | ||
182 | { | ||
183 | struct fb_info *fbi = dev_get_drvdata(dev); | ||
184 | struct omapfb_info *ofbi = FB2OFB(fbi); | ||
185 | struct omapfb2_device *fbdev = ofbi->fbdev; | ||
186 | struct omap_overlay *ovls[OMAPFB_MAX_OVL_PER_FB]; | ||
187 | struct omap_overlay *ovl; | ||
188 | int num_ovls, r, i; | ||
189 | int len; | ||
190 | bool added = false; | ||
191 | |||
192 | num_ovls = 0; | ||
193 | |||
194 | len = strlen(buf); | ||
195 | if (buf[len - 1] == '\n') | ||
196 | len = len - 1; | ||
197 | |||
198 | omapfb_lock(fbdev); | ||
199 | lock_fb_info(fbi); | ||
200 | |||
201 | if (len > 0) { | ||
202 | char *p = (char *)buf; | ||
203 | int ovlnum; | ||
204 | |||
205 | while (p < buf + len) { | ||
206 | int found; | ||
207 | if (num_ovls == OMAPFB_MAX_OVL_PER_FB) { | ||
208 | r = -EINVAL; | ||
209 | goto out; | ||
210 | } | ||
211 | |||
212 | ovlnum = simple_strtoul(p, &p, 0); | ||
213 | if (ovlnum > fbdev->num_overlays) { | ||
214 | r = -EINVAL; | ||
215 | goto out; | ||
216 | } | ||
217 | |||
218 | found = 0; | ||
219 | for (i = 0; i < num_ovls; ++i) { | ||
220 | if (ovls[i] == fbdev->overlays[ovlnum]) { | ||
221 | found = 1; | ||
222 | break; | ||
223 | } | ||
224 | } | ||
225 | |||
226 | if (!found) | ||
227 | ovls[num_ovls++] = fbdev->overlays[ovlnum]; | ||
228 | |||
229 | p++; | ||
230 | } | ||
231 | } | ||
232 | |||
233 | for (i = 0; i < num_ovls; ++i) { | ||
234 | struct omapfb_info *ofbi2 = get_overlay_fb(fbdev, ovls[i]); | ||
235 | if (ofbi2 && ofbi2 != ofbi) { | ||
236 | dev_err(fbdev->dev, "overlay already in use\n"); | ||
237 | r = -EINVAL; | ||
238 | goto out; | ||
239 | } | ||
240 | } | ||
241 | |||
242 | /* detach unused overlays */ | ||
243 | for (i = 0; i < ofbi->num_overlays; ++i) { | ||
244 | int t, found; | ||
245 | |||
246 | ovl = ofbi->overlays[i]; | ||
247 | |||
248 | found = 0; | ||
249 | |||
250 | for (t = 0; t < num_ovls; ++t) { | ||
251 | if (ovl == ovls[t]) { | ||
252 | found = 1; | ||
253 | break; | ||
254 | } | ||
255 | } | ||
256 | |||
257 | if (found) | ||
258 | continue; | ||
259 | |||
260 | DBG("detaching %d\n", ofbi->overlays[i]->id); | ||
261 | |||
262 | omapfb_overlay_enable(ovl, 0); | ||
263 | |||
264 | if (ovl->manager) | ||
265 | ovl->manager->apply(ovl->manager); | ||
266 | |||
267 | for (t = i + 1; t < ofbi->num_overlays; t++) { | ||
268 | ofbi->rotation[t-1] = ofbi->rotation[t]; | ||
269 | ofbi->overlays[t-1] = ofbi->overlays[t]; | ||
270 | } | ||
271 | |||
272 | ofbi->num_overlays--; | ||
273 | i--; | ||
274 | } | ||
275 | |||
276 | for (i = 0; i < num_ovls; ++i) { | ||
277 | int t, found; | ||
278 | |||
279 | ovl = ovls[i]; | ||
280 | |||
281 | found = 0; | ||
282 | |||
283 | for (t = 0; t < ofbi->num_overlays; ++t) { | ||
284 | if (ovl == ofbi->overlays[t]) { | ||
285 | found = 1; | ||
286 | break; | ||
287 | } | ||
288 | } | ||
289 | |||
290 | if (found) | ||
291 | continue; | ||
292 | ofbi->rotation[ofbi->num_overlays] = 0; | ||
293 | ofbi->overlays[ofbi->num_overlays++] = ovl; | ||
294 | |||
295 | added = true; | ||
296 | } | ||
297 | |||
298 | if (added) { | ||
299 | r = omapfb_apply_changes(fbi, 0); | ||
300 | if (r) | ||
301 | goto out; | ||
302 | } | ||
303 | |||
304 | r = count; | ||
305 | out: | ||
306 | unlock_fb_info(fbi); | ||
307 | omapfb_unlock(fbdev); | ||
308 | |||
309 | return r; | ||
310 | } | ||
311 | |||
312 | static ssize_t show_overlays_rotate(struct device *dev, | ||
313 | struct device_attribute *attr, char *buf) | ||
314 | { | ||
315 | struct fb_info *fbi = dev_get_drvdata(dev); | ||
316 | struct omapfb_info *ofbi = FB2OFB(fbi); | ||
317 | ssize_t l = 0; | ||
318 | int t; | ||
319 | |||
320 | lock_fb_info(fbi); | ||
321 | |||
322 | for (t = 0; t < ofbi->num_overlays; t++) { | ||
323 | l += snprintf(buf + l, PAGE_SIZE - l, "%s%d", | ||
324 | t == 0 ? "" : ",", ofbi->rotation[t]); | ||
325 | } | ||
326 | |||
327 | l += snprintf(buf + l, PAGE_SIZE - l, "\n"); | ||
328 | |||
329 | unlock_fb_info(fbi); | ||
330 | |||
331 | return l; | ||
332 | } | ||
333 | |||
334 | static ssize_t store_overlays_rotate(struct device *dev, | ||
335 | struct device_attribute *attr, const char *buf, size_t count) | ||
336 | { | ||
337 | struct fb_info *fbi = dev_get_drvdata(dev); | ||
338 | struct omapfb_info *ofbi = FB2OFB(fbi); | ||
339 | int num_ovls = 0, r, i; | ||
340 | int len; | ||
341 | bool changed = false; | ||
342 | u8 rotation[OMAPFB_MAX_OVL_PER_FB]; | ||
343 | |||
344 | len = strlen(buf); | ||
345 | if (buf[len - 1] == '\n') | ||
346 | len = len - 1; | ||
347 | |||
348 | lock_fb_info(fbi); | ||
349 | |||
350 | if (len > 0) { | ||
351 | char *p = (char *)buf; | ||
352 | |||
353 | while (p < buf + len) { | ||
354 | int rot; | ||
355 | |||
356 | if (num_ovls == ofbi->num_overlays) { | ||
357 | r = -EINVAL; | ||
358 | goto out; | ||
359 | } | ||
360 | |||
361 | rot = simple_strtoul(p, &p, 0); | ||
362 | if (rot < 0 || rot > 3) { | ||
363 | r = -EINVAL; | ||
364 | goto out; | ||
365 | } | ||
366 | |||
367 | if (ofbi->rotation[num_ovls] != rot) | ||
368 | changed = true; | ||
369 | |||
370 | rotation[num_ovls++] = rot; | ||
371 | |||
372 | p++; | ||
373 | } | ||
374 | } | ||
375 | |||
376 | if (num_ovls != ofbi->num_overlays) { | ||
377 | r = -EINVAL; | ||
378 | goto out; | ||
379 | } | ||
380 | |||
381 | if (changed) { | ||
382 | for (i = 0; i < num_ovls; ++i) | ||
383 | ofbi->rotation[i] = rotation[i]; | ||
384 | |||
385 | r = omapfb_apply_changes(fbi, 0); | ||
386 | if (r) | ||
387 | goto out; | ||
388 | |||
389 | /* FIXME error handling? */ | ||
390 | } | ||
391 | |||
392 | r = count; | ||
393 | out: | ||
394 | unlock_fb_info(fbi); | ||
395 | |||
396 | return r; | ||
397 | } | ||
398 | |||
399 | static ssize_t show_size(struct device *dev, | ||
400 | struct device_attribute *attr, char *buf) | ||
401 | { | ||
402 | struct fb_info *fbi = dev_get_drvdata(dev); | ||
403 | struct omapfb_info *ofbi = FB2OFB(fbi); | ||
404 | |||
405 | return snprintf(buf, PAGE_SIZE, "%lu\n", ofbi->region.size); | ||
406 | } | ||
407 | |||
408 | static ssize_t store_size(struct device *dev, struct device_attribute *attr, | ||
409 | const char *buf, size_t count) | ||
410 | { | ||
411 | struct fb_info *fbi = dev_get_drvdata(dev); | ||
412 | struct omapfb_info *ofbi = FB2OFB(fbi); | ||
413 | unsigned long size; | ||
414 | int r; | ||
415 | int i; | ||
416 | |||
417 | size = PAGE_ALIGN(simple_strtoul(buf, NULL, 0)); | ||
418 | |||
419 | lock_fb_info(fbi); | ||
420 | |||
421 | for (i = 0; i < ofbi->num_overlays; i++) { | ||
422 | if (ofbi->overlays[i]->info.enabled) { | ||
423 | r = -EBUSY; | ||
424 | goto out; | ||
425 | } | ||
426 | } | ||
427 | |||
428 | if (size != ofbi->region.size) { | ||
429 | r = omapfb_realloc_fbmem(fbi, size, ofbi->region.type); | ||
430 | if (r) { | ||
431 | dev_err(dev, "realloc fbmem failed\n"); | ||
432 | goto out; | ||
433 | } | ||
434 | } | ||
435 | |||
436 | r = count; | ||
437 | out: | ||
438 | unlock_fb_info(fbi); | ||
439 | |||
440 | return r; | ||
441 | } | ||
442 | |||
443 | static ssize_t show_phys(struct device *dev, | ||
444 | struct device_attribute *attr, char *buf) | ||
445 | { | ||
446 | struct fb_info *fbi = dev_get_drvdata(dev); | ||
447 | struct omapfb_info *ofbi = FB2OFB(fbi); | ||
448 | |||
449 | return snprintf(buf, PAGE_SIZE, "%0x\n", ofbi->region.paddr); | ||
450 | } | ||
451 | |||
452 | static ssize_t show_virt(struct device *dev, | ||
453 | struct device_attribute *attr, char *buf) | ||
454 | { | ||
455 | struct fb_info *fbi = dev_get_drvdata(dev); | ||
456 | struct omapfb_info *ofbi = FB2OFB(fbi); | ||
457 | |||
458 | return snprintf(buf, PAGE_SIZE, "%p\n", ofbi->region.vaddr); | ||
459 | } | ||
460 | |||
461 | static struct device_attribute omapfb_attrs[] = { | ||
462 | __ATTR(rotate_type, S_IRUGO | S_IWUSR, show_rotate_type, | ||
463 | store_rotate_type), | ||
464 | __ATTR(mirror, S_IRUGO | S_IWUSR, show_mirror, store_mirror), | ||
465 | __ATTR(size, S_IRUGO | S_IWUSR, show_size, store_size), | ||
466 | __ATTR(overlays, S_IRUGO | S_IWUSR, show_overlays, store_overlays), | ||
467 | __ATTR(overlays_rotate, S_IRUGO | S_IWUSR, show_overlays_rotate, | ||
468 | store_overlays_rotate), | ||
469 | __ATTR(phys_addr, S_IRUGO, show_phys, NULL), | ||
470 | __ATTR(virt_addr, S_IRUGO, show_virt, NULL), | ||
471 | }; | ||
472 | |||
473 | int omapfb_create_sysfs(struct omapfb2_device *fbdev) | ||
474 | { | ||
475 | int i; | ||
476 | int r; | ||
477 | |||
478 | DBG("create sysfs for fbs\n"); | ||
479 | for (i = 0; i < fbdev->num_fbs; i++) { | ||
480 | int t; | ||
481 | for (t = 0; t < ARRAY_SIZE(omapfb_attrs); t++) { | ||
482 | r = device_create_file(fbdev->fbs[i]->dev, | ||
483 | &omapfb_attrs[t]); | ||
484 | |||
485 | if (r) { | ||
486 | dev_err(fbdev->dev, "failed to create sysfs " | ||
487 | "file\n"); | ||
488 | return r; | ||
489 | } | ||
490 | } | ||
491 | } | ||
492 | |||
493 | return 0; | ||
494 | } | ||
495 | |||
496 | void omapfb_remove_sysfs(struct omapfb2_device *fbdev) | ||
497 | { | ||
498 | int i, t; | ||
499 | |||
500 | DBG("remove sysfs for fbs\n"); | ||
501 | for (i = 0; i < fbdev->num_fbs; i++) { | ||
502 | for (t = 0; t < ARRAY_SIZE(omapfb_attrs); t++) | ||
503 | device_remove_file(fbdev->fbs[i]->dev, | ||
504 | &omapfb_attrs[t]); | ||
505 | } | ||
506 | } | ||
507 | |||
diff --git a/drivers/video/omap2/omapfb/omapfb.h b/drivers/video/omap2/omapfb/omapfb.h new file mode 100644 index 000000000000..f7c9c739e5ef --- /dev/null +++ b/drivers/video/omap2/omapfb/omapfb.h | |||
@@ -0,0 +1,146 @@ | |||
1 | /* | ||
2 | * linux/drivers/video/omap2/omapfb.h | ||
3 | * | ||
4 | * Copyright (C) 2008 Nokia Corporation | ||
5 | * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> | ||
6 | * | ||
7 | * Some code and ideas taken from drivers/video/omap/ driver | ||
8 | * by Imre Deak. | ||
9 | * | ||
10 | * This program is free software; you can redistribute it and/or modify it | ||
11 | * under the terms of the GNU General Public License version 2 as published by | ||
12 | * the Free Software Foundation. | ||
13 | * | ||
14 | * This program is distributed in the hope that it will be useful, but WITHOUT | ||
15 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | ||
16 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for | ||
17 | * more details. | ||
18 | * | ||
19 | * You should have received a copy of the GNU General Public License along with | ||
20 | * this program. If not, see <http://www.gnu.org/licenses/>. | ||
21 | */ | ||
22 | |||
23 | #ifndef __DRIVERS_VIDEO_OMAP2_OMAPFB_H__ | ||
24 | #define __DRIVERS_VIDEO_OMAP2_OMAPFB_H__ | ||
25 | |||
26 | #ifdef CONFIG_FB_OMAP2_DEBUG_SUPPORT | ||
27 | #define DEBUG | ||
28 | #endif | ||
29 | |||
30 | #include <plat/display.h> | ||
31 | |||
32 | #ifdef DEBUG | ||
33 | extern unsigned int omapfb_debug; | ||
34 | #define DBG(format, ...) \ | ||
35 | if (omapfb_debug) \ | ||
36 | printk(KERN_DEBUG "OMAPFB: " format, ## __VA_ARGS__) | ||
37 | #else | ||
38 | #define DBG(format, ...) | ||
39 | #endif | ||
40 | |||
41 | #define FB2OFB(fb_info) ((struct omapfb_info *)(fb_info->par)) | ||
42 | |||
43 | /* max number of overlays to which a framebuffer data can be direct */ | ||
44 | #define OMAPFB_MAX_OVL_PER_FB 3 | ||
45 | |||
46 | struct omapfb2_mem_region { | ||
47 | u32 paddr; | ||
48 | void __iomem *vaddr; | ||
49 | struct vrfb vrfb; | ||
50 | unsigned long size; | ||
51 | u8 type; /* OMAPFB_PLANE_MEM_* */ | ||
52 | bool alloc; /* allocated by the driver */ | ||
53 | bool map; /* kernel mapped by the driver */ | ||
54 | }; | ||
55 | |||
56 | /* appended to fb_info */ | ||
57 | struct omapfb_info { | ||
58 | int id; | ||
59 | struct omapfb2_mem_region region; | ||
60 | atomic_t map_count; | ||
61 | int num_overlays; | ||
62 | struct omap_overlay *overlays[OMAPFB_MAX_OVL_PER_FB]; | ||
63 | struct omapfb2_device *fbdev; | ||
64 | enum omap_dss_rotation_type rotation_type; | ||
65 | u8 rotation[OMAPFB_MAX_OVL_PER_FB]; | ||
66 | bool mirror; | ||
67 | }; | ||
68 | |||
69 | struct omapfb2_device { | ||
70 | struct device *dev; | ||
71 | struct mutex mtx; | ||
72 | |||
73 | u32 pseudo_palette[17]; | ||
74 | |||
75 | int state; | ||
76 | |||
77 | unsigned num_fbs; | ||
78 | struct fb_info *fbs[10]; | ||
79 | |||
80 | unsigned num_displays; | ||
81 | struct omap_dss_device *displays[10]; | ||
82 | unsigned num_overlays; | ||
83 | struct omap_overlay *overlays[10]; | ||
84 | unsigned num_managers; | ||
85 | struct omap_overlay_manager *managers[10]; | ||
86 | }; | ||
87 | |||
88 | struct omapfb_colormode { | ||
89 | enum omap_color_mode dssmode; | ||
90 | u32 bits_per_pixel; | ||
91 | u32 nonstd; | ||
92 | struct fb_bitfield red; | ||
93 | struct fb_bitfield green; | ||
94 | struct fb_bitfield blue; | ||
95 | struct fb_bitfield transp; | ||
96 | }; | ||
97 | |||
98 | void set_fb_fix(struct fb_info *fbi); | ||
99 | int check_fb_var(struct fb_info *fbi, struct fb_var_screeninfo *var); | ||
100 | int omapfb_realloc_fbmem(struct fb_info *fbi, unsigned long size, int type); | ||
101 | int omapfb_apply_changes(struct fb_info *fbi, int init); | ||
102 | |||
103 | int omapfb_create_sysfs(struct omapfb2_device *fbdev); | ||
104 | void omapfb_remove_sysfs(struct omapfb2_device *fbdev); | ||
105 | |||
106 | int omapfb_ioctl(struct fb_info *fbi, unsigned int cmd, unsigned long arg); | ||
107 | |||
108 | int dss_mode_to_fb_mode(enum omap_color_mode dssmode, | ||
109 | struct fb_var_screeninfo *var); | ||
110 | |||
111 | /* find the display connected to this fb, if any */ | ||
112 | static inline struct omap_dss_device *fb2display(struct fb_info *fbi) | ||
113 | { | ||
114 | struct omapfb_info *ofbi = FB2OFB(fbi); | ||
115 | int i; | ||
116 | |||
117 | /* XXX: returns the display connected to first attached overlay */ | ||
118 | for (i = 0; i < ofbi->num_overlays; i++) { | ||
119 | if (ofbi->overlays[i]->manager) | ||
120 | return ofbi->overlays[i]->manager->device; | ||
121 | } | ||
122 | |||
123 | return NULL; | ||
124 | } | ||
125 | |||
126 | static inline void omapfb_lock(struct omapfb2_device *fbdev) | ||
127 | { | ||
128 | mutex_lock(&fbdev->mtx); | ||
129 | } | ||
130 | |||
131 | static inline void omapfb_unlock(struct omapfb2_device *fbdev) | ||
132 | { | ||
133 | mutex_unlock(&fbdev->mtx); | ||
134 | } | ||
135 | |||
136 | static inline int omapfb_overlay_enable(struct omap_overlay *ovl, | ||
137 | int enable) | ||
138 | { | ||
139 | struct omap_overlay_info info; | ||
140 | |||
141 | ovl->get_overlay_info(ovl, &info); | ||
142 | info.enabled = enable; | ||
143 | return ovl->set_overlay_info(ovl, &info); | ||
144 | } | ||
145 | |||
146 | #endif | ||
diff --git a/drivers/video/omap2/vram.c b/drivers/video/omap2/vram.c new file mode 100644 index 000000000000..55a4de5e5d10 --- /dev/null +++ b/drivers/video/omap2/vram.c | |||
@@ -0,0 +1,655 @@ | |||
1 | /* | ||
2 | * VRAM manager for OMAP | ||
3 | * | ||
4 | * Copyright (C) 2009 Nokia Corporation | ||
5 | * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> | ||
6 | * | ||
7 | * This program is free software; you can redistribute it and/or modify | ||
8 | * it under the terms of the GNU General Public License version 2 as | ||
9 | * published by the Free Software Foundation. | ||
10 | * | ||
11 | * This program is distributed in the hope that it will be useful, but | ||
12 | * WITHOUT ANY WARRANTY; without even the implied warranty of | ||
13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | ||
14 | * General Public License for more details. | ||
15 | * | ||
16 | * You should have received a copy of the GNU General Public License along | ||
17 | * with this program; if not, write to the Free Software Foundation, Inc., | ||
18 | * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. | ||
19 | */ | ||
20 | |||
21 | /*#define DEBUG*/ | ||
22 | |||
23 | #include <linux/kernel.h> | ||
24 | #include <linux/mm.h> | ||
25 | #include <linux/list.h> | ||
26 | #include <linux/seq_file.h> | ||
27 | #include <linux/bootmem.h> | ||
28 | #include <linux/completion.h> | ||
29 | #include <linux/debugfs.h> | ||
30 | #include <linux/jiffies.h> | ||
31 | #include <linux/module.h> | ||
32 | |||
33 | #include <asm/setup.h> | ||
34 | |||
35 | #include <plat/sram.h> | ||
36 | #include <plat/vram.h> | ||
37 | #include <plat/dma.h> | ||
38 | |||
39 | #ifdef DEBUG | ||
40 | #define DBG(format, ...) pr_debug("VRAM: " format, ## __VA_ARGS__) | ||
41 | #else | ||
42 | #define DBG(format, ...) | ||
43 | #endif | ||
44 | |||
45 | #define OMAP2_SRAM_START 0x40200000 | ||
46 | /* Maximum size, in reality this is smaller if SRAM is partially locked. */ | ||
47 | #define OMAP2_SRAM_SIZE 0xa0000 /* 640k */ | ||
48 | |||
49 | /* postponed regions are used to temporarily store region information at boot | ||
50 | * time when we cannot yet allocate the region list */ | ||
51 | #define MAX_POSTPONED_REGIONS 10 | ||
52 | |||
53 | static bool vram_initialized; | ||
54 | static int postponed_cnt; | ||
55 | static struct { | ||
56 | unsigned long paddr; | ||
57 | size_t size; | ||
58 | } postponed_regions[MAX_POSTPONED_REGIONS]; | ||
59 | |||
60 | struct vram_alloc { | ||
61 | struct list_head list; | ||
62 | unsigned long paddr; | ||
63 | unsigned pages; | ||
64 | }; | ||
65 | |||
66 | struct vram_region { | ||
67 | struct list_head list; | ||
68 | struct list_head alloc_list; | ||
69 | unsigned long paddr; | ||
70 | unsigned pages; | ||
71 | }; | ||
72 | |||
73 | static DEFINE_MUTEX(region_mutex); | ||
74 | static LIST_HEAD(region_list); | ||
75 | |||
76 | static inline int region_mem_type(unsigned long paddr) | ||
77 | { | ||
78 | if (paddr >= OMAP2_SRAM_START && | ||
79 | paddr < OMAP2_SRAM_START + OMAP2_SRAM_SIZE) | ||
80 | return OMAP_VRAM_MEMTYPE_SRAM; | ||
81 | else | ||
82 | return OMAP_VRAM_MEMTYPE_SDRAM; | ||
83 | } | ||
84 | |||
85 | static struct vram_region *omap_vram_create_region(unsigned long paddr, | ||
86 | unsigned pages) | ||
87 | { | ||
88 | struct vram_region *rm; | ||
89 | |||
90 | rm = kzalloc(sizeof(*rm), GFP_KERNEL); | ||
91 | |||
92 | if (rm) { | ||
93 | INIT_LIST_HEAD(&rm->alloc_list); | ||
94 | rm->paddr = paddr; | ||
95 | rm->pages = pages; | ||
96 | } | ||
97 | |||
98 | return rm; | ||
99 | } | ||
100 | |||
101 | #if 0 | ||
102 | static void omap_vram_free_region(struct vram_region *vr) | ||
103 | { | ||
104 | list_del(&vr->list); | ||
105 | kfree(vr); | ||
106 | } | ||
107 | #endif | ||
108 | |||
109 | static struct vram_alloc *omap_vram_create_allocation(struct vram_region *vr, | ||
110 | unsigned long paddr, unsigned pages) | ||
111 | { | ||
112 | struct vram_alloc *va; | ||
113 | struct vram_alloc *new; | ||
114 | |||
115 | new = kzalloc(sizeof(*va), GFP_KERNEL); | ||
116 | |||
117 | if (!new) | ||
118 | return NULL; | ||
119 | |||
120 | new->paddr = paddr; | ||
121 | new->pages = pages; | ||
122 | |||
123 | list_for_each_entry(va, &vr->alloc_list, list) { | ||
124 | if (va->paddr > new->paddr) | ||
125 | break; | ||
126 | } | ||
127 | |||
128 | list_add_tail(&new->list, &va->list); | ||
129 | |||
130 | return new; | ||
131 | } | ||
132 | |||
133 | static void omap_vram_free_allocation(struct vram_alloc *va) | ||
134 | { | ||
135 | list_del(&va->list); | ||
136 | kfree(va); | ||
137 | } | ||
138 | |||
139 | int omap_vram_add_region(unsigned long paddr, size_t size) | ||
140 | { | ||
141 | struct vram_region *rm; | ||
142 | unsigned pages; | ||
143 | |||
144 | if (vram_initialized) { | ||
145 | DBG("adding region paddr %08lx size %d\n", | ||
146 | paddr, size); | ||
147 | |||
148 | size &= PAGE_MASK; | ||
149 | pages = size >> PAGE_SHIFT; | ||
150 | |||
151 | rm = omap_vram_create_region(paddr, pages); | ||
152 | if (rm == NULL) | ||
153 | return -ENOMEM; | ||
154 | |||
155 | list_add(&rm->list, ®ion_list); | ||
156 | } else { | ||
157 | if (postponed_cnt == MAX_POSTPONED_REGIONS) | ||
158 | return -ENOMEM; | ||
159 | |||
160 | postponed_regions[postponed_cnt].paddr = paddr; | ||
161 | postponed_regions[postponed_cnt].size = size; | ||
162 | |||
163 | ++postponed_cnt; | ||
164 | } | ||
165 | return 0; | ||
166 | } | ||
167 | |||
168 | int omap_vram_free(unsigned long paddr, size_t size) | ||
169 | { | ||
170 | struct vram_region *rm; | ||
171 | struct vram_alloc *alloc; | ||
172 | unsigned start, end; | ||
173 | |||
174 | DBG("free mem paddr %08lx size %d\n", paddr, size); | ||
175 | |||
176 | size = PAGE_ALIGN(size); | ||
177 | |||
178 | mutex_lock(®ion_mutex); | ||
179 | |||
180 | list_for_each_entry(rm, ®ion_list, list) { | ||
181 | list_for_each_entry(alloc, &rm->alloc_list, list) { | ||
182 | start = alloc->paddr; | ||
183 | end = alloc->paddr + (alloc->pages >> PAGE_SHIFT); | ||
184 | |||
185 | if (start >= paddr && end < paddr + size) | ||
186 | goto found; | ||
187 | } | ||
188 | } | ||
189 | |||
190 | mutex_unlock(®ion_mutex); | ||
191 | return -EINVAL; | ||
192 | |||
193 | found: | ||
194 | omap_vram_free_allocation(alloc); | ||
195 | |||
196 | mutex_unlock(®ion_mutex); | ||
197 | return 0; | ||
198 | } | ||
199 | EXPORT_SYMBOL(omap_vram_free); | ||
200 | |||
201 | static int _omap_vram_reserve(unsigned long paddr, unsigned pages) | ||
202 | { | ||
203 | struct vram_region *rm; | ||
204 | struct vram_alloc *alloc; | ||
205 | size_t size; | ||
206 | |||
207 | size = pages << PAGE_SHIFT; | ||
208 | |||
209 | list_for_each_entry(rm, ®ion_list, list) { | ||
210 | unsigned long start, end; | ||
211 | |||
212 | DBG("checking region %lx %d\n", rm->paddr, rm->pages); | ||
213 | |||
214 | if (region_mem_type(rm->paddr) != region_mem_type(paddr)) | ||
215 | continue; | ||
216 | |||
217 | start = rm->paddr; | ||
218 | end = start + (rm->pages << PAGE_SHIFT) - 1; | ||
219 | if (start > paddr || end < paddr + size - 1) | ||
220 | continue; | ||
221 | |||
222 | DBG("block ok, checking allocs\n"); | ||
223 | |||
224 | list_for_each_entry(alloc, &rm->alloc_list, list) { | ||
225 | end = alloc->paddr - 1; | ||
226 | |||
227 | if (start <= paddr && end >= paddr + size - 1) | ||
228 | goto found; | ||
229 | |||
230 | start = alloc->paddr + (alloc->pages << PAGE_SHIFT); | ||
231 | } | ||
232 | |||
233 | end = rm->paddr + (rm->pages << PAGE_SHIFT) - 1; | ||
234 | |||
235 | if (!(start <= paddr && end >= paddr + size - 1)) | ||
236 | continue; | ||
237 | found: | ||
238 | DBG("found area start %lx, end %lx\n", start, end); | ||
239 | |||
240 | if (omap_vram_create_allocation(rm, paddr, pages) == NULL) | ||
241 | return -ENOMEM; | ||
242 | |||
243 | return 0; | ||
244 | } | ||
245 | |||
246 | return -ENOMEM; | ||
247 | } | ||
248 | |||
249 | int omap_vram_reserve(unsigned long paddr, size_t size) | ||
250 | { | ||
251 | unsigned pages; | ||
252 | int r; | ||
253 | |||
254 | DBG("reserve mem paddr %08lx size %d\n", paddr, size); | ||
255 | |||
256 | size = PAGE_ALIGN(size); | ||
257 | pages = size >> PAGE_SHIFT; | ||
258 | |||
259 | mutex_lock(®ion_mutex); | ||
260 | |||
261 | r = _omap_vram_reserve(paddr, pages); | ||
262 | |||
263 | mutex_unlock(®ion_mutex); | ||
264 | |||
265 | return r; | ||
266 | } | ||
267 | EXPORT_SYMBOL(omap_vram_reserve); | ||
268 | |||
269 | static void _omap_vram_dma_cb(int lch, u16 ch_status, void *data) | ||
270 | { | ||
271 | struct completion *compl = data; | ||
272 | complete(compl); | ||
273 | } | ||
274 | |||
275 | static int _omap_vram_clear(u32 paddr, unsigned pages) | ||
276 | { | ||
277 | struct completion compl; | ||
278 | unsigned elem_count; | ||
279 | unsigned frame_count; | ||
280 | int r; | ||
281 | int lch; | ||
282 | |||
283 | init_completion(&compl); | ||
284 | |||
285 | r = omap_request_dma(OMAP_DMA_NO_DEVICE, "VRAM DMA", | ||
286 | _omap_vram_dma_cb, | ||
287 | &compl, &lch); | ||
288 | if (r) { | ||
289 | pr_err("VRAM: request_dma failed for memory clear\n"); | ||
290 | return -EBUSY; | ||
291 | } | ||
292 | |||
293 | elem_count = pages * PAGE_SIZE / 4; | ||
294 | frame_count = 1; | ||
295 | |||
296 | omap_set_dma_transfer_params(lch, OMAP_DMA_DATA_TYPE_S32, | ||
297 | elem_count, frame_count, | ||
298 | OMAP_DMA_SYNC_ELEMENT, | ||
299 | 0, 0); | ||
300 | |||
301 | omap_set_dma_dest_params(lch, 0, OMAP_DMA_AMODE_POST_INC, | ||
302 | paddr, 0, 0); | ||
303 | |||
304 | omap_set_dma_color_mode(lch, OMAP_DMA_CONSTANT_FILL, 0x000000); | ||
305 | |||
306 | omap_start_dma(lch); | ||
307 | |||
308 | if (wait_for_completion_timeout(&compl, msecs_to_jiffies(1000)) == 0) { | ||
309 | omap_stop_dma(lch); | ||
310 | pr_err("VRAM: dma timeout while clearing memory\n"); | ||
311 | r = -EIO; | ||
312 | goto err; | ||
313 | } | ||
314 | |||
315 | r = 0; | ||
316 | err: | ||
317 | omap_free_dma(lch); | ||
318 | |||
319 | return r; | ||
320 | } | ||
321 | |||
322 | static int _omap_vram_alloc(int mtype, unsigned pages, unsigned long *paddr) | ||
323 | { | ||
324 | struct vram_region *rm; | ||
325 | struct vram_alloc *alloc; | ||
326 | |||
327 | list_for_each_entry(rm, ®ion_list, list) { | ||
328 | unsigned long start, end; | ||
329 | |||
330 | DBG("checking region %lx %d\n", rm->paddr, rm->pages); | ||
331 | |||
332 | if (region_mem_type(rm->paddr) != mtype) | ||
333 | continue; | ||
334 | |||
335 | start = rm->paddr; | ||
336 | |||
337 | list_for_each_entry(alloc, &rm->alloc_list, list) { | ||
338 | end = alloc->paddr; | ||
339 | |||
340 | if (end - start >= pages << PAGE_SHIFT) | ||
341 | goto found; | ||
342 | |||
343 | start = alloc->paddr + (alloc->pages << PAGE_SHIFT); | ||
344 | } | ||
345 | |||
346 | end = rm->paddr + (rm->pages << PAGE_SHIFT); | ||
347 | found: | ||
348 | if (end - start < pages << PAGE_SHIFT) | ||
349 | continue; | ||
350 | |||
351 | DBG("found %lx, end %lx\n", start, end); | ||
352 | |||
353 | alloc = omap_vram_create_allocation(rm, start, pages); | ||
354 | if (alloc == NULL) | ||
355 | return -ENOMEM; | ||
356 | |||
357 | *paddr = start; | ||
358 | |||
359 | _omap_vram_clear(start, pages); | ||
360 | |||
361 | return 0; | ||
362 | } | ||
363 | |||
364 | return -ENOMEM; | ||
365 | } | ||
366 | |||
367 | int omap_vram_alloc(int mtype, size_t size, unsigned long *paddr) | ||
368 | { | ||
369 | unsigned pages; | ||
370 | int r; | ||
371 | |||
372 | BUG_ON(mtype > OMAP_VRAM_MEMTYPE_MAX || !size); | ||
373 | |||
374 | DBG("alloc mem type %d size %d\n", mtype, size); | ||
375 | |||
376 | size = PAGE_ALIGN(size); | ||
377 | pages = size >> PAGE_SHIFT; | ||
378 | |||
379 | mutex_lock(®ion_mutex); | ||
380 | |||
381 | r = _omap_vram_alloc(mtype, pages, paddr); | ||
382 | |||
383 | mutex_unlock(®ion_mutex); | ||
384 | |||
385 | return r; | ||
386 | } | ||
387 | EXPORT_SYMBOL(omap_vram_alloc); | ||
388 | |||
389 | void omap_vram_get_info(unsigned long *vram, | ||
390 | unsigned long *free_vram, | ||
391 | unsigned long *largest_free_block) | ||
392 | { | ||
393 | struct vram_region *vr; | ||
394 | struct vram_alloc *va; | ||
395 | |||
396 | *vram = 0; | ||
397 | *free_vram = 0; | ||
398 | *largest_free_block = 0; | ||
399 | |||
400 | mutex_lock(®ion_mutex); | ||
401 | |||
402 | list_for_each_entry(vr, ®ion_list, list) { | ||
403 | unsigned free; | ||
404 | unsigned long pa; | ||
405 | |||
406 | pa = vr->paddr; | ||
407 | *vram += vr->pages << PAGE_SHIFT; | ||
408 | |||
409 | list_for_each_entry(va, &vr->alloc_list, list) { | ||
410 | free = va->paddr - pa; | ||
411 | *free_vram += free; | ||
412 | if (free > *largest_free_block) | ||
413 | *largest_free_block = free; | ||
414 | pa = va->paddr + (va->pages << PAGE_SHIFT); | ||
415 | } | ||
416 | |||
417 | free = vr->paddr + (vr->pages << PAGE_SHIFT) - pa; | ||
418 | *free_vram += free; | ||
419 | if (free > *largest_free_block) | ||
420 | *largest_free_block = free; | ||
421 | } | ||
422 | |||
423 | mutex_unlock(®ion_mutex); | ||
424 | } | ||
425 | EXPORT_SYMBOL(omap_vram_get_info); | ||
426 | |||
427 | #if defined(CONFIG_DEBUG_FS) | ||
428 | static int vram_debug_show(struct seq_file *s, void *unused) | ||
429 | { | ||
430 | struct vram_region *vr; | ||
431 | struct vram_alloc *va; | ||
432 | unsigned size; | ||
433 | |||
434 | mutex_lock(®ion_mutex); | ||
435 | |||
436 | list_for_each_entry(vr, ®ion_list, list) { | ||
437 | size = vr->pages << PAGE_SHIFT; | ||
438 | seq_printf(s, "%08lx-%08lx (%d bytes)\n", | ||
439 | vr->paddr, vr->paddr + size - 1, | ||
440 | size); | ||
441 | |||
442 | list_for_each_entry(va, &vr->alloc_list, list) { | ||
443 | size = va->pages << PAGE_SHIFT; | ||
444 | seq_printf(s, " %08lx-%08lx (%d bytes)\n", | ||
445 | va->paddr, va->paddr + size - 1, | ||
446 | size); | ||
447 | } | ||
448 | } | ||
449 | |||
450 | mutex_unlock(®ion_mutex); | ||
451 | |||
452 | return 0; | ||
453 | } | ||
454 | |||
455 | static int vram_debug_open(struct inode *inode, struct file *file) | ||
456 | { | ||
457 | return single_open(file, vram_debug_show, inode->i_private); | ||
458 | } | ||
459 | |||
460 | static const struct file_operations vram_debug_fops = { | ||
461 | .open = vram_debug_open, | ||
462 | .read = seq_read, | ||
463 | .llseek = seq_lseek, | ||
464 | .release = single_release, | ||
465 | }; | ||
466 | |||
467 | static int __init omap_vram_create_debugfs(void) | ||
468 | { | ||
469 | struct dentry *d; | ||
470 | |||
471 | d = debugfs_create_file("vram", S_IRUGO, NULL, | ||
472 | NULL, &vram_debug_fops); | ||
473 | if (IS_ERR(d)) | ||
474 | return PTR_ERR(d); | ||
475 | |||
476 | return 0; | ||
477 | } | ||
478 | #endif | ||
479 | |||
480 | static __init int omap_vram_init(void) | ||
481 | { | ||
482 | int i; | ||
483 | |||
484 | vram_initialized = 1; | ||
485 | |||
486 | for (i = 0; i < postponed_cnt; i++) | ||
487 | omap_vram_add_region(postponed_regions[i].paddr, | ||
488 | postponed_regions[i].size); | ||
489 | |||
490 | #ifdef CONFIG_DEBUG_FS | ||
491 | if (omap_vram_create_debugfs()) | ||
492 | pr_err("VRAM: Failed to create debugfs file\n"); | ||
493 | #endif | ||
494 | |||
495 | return 0; | ||
496 | } | ||
497 | |||
498 | arch_initcall(omap_vram_init); | ||
499 | |||
500 | /* boottime vram alloc stuff */ | ||
501 | |||
502 | /* set from board file */ | ||
503 | static u32 omap_vram_sram_start __initdata; | ||
504 | static u32 omap_vram_sram_size __initdata; | ||
505 | |||
506 | /* set from board file */ | ||
507 | static u32 omap_vram_sdram_start __initdata; | ||
508 | static u32 omap_vram_sdram_size __initdata; | ||
509 | |||
510 | /* set from kernel cmdline */ | ||
511 | static u32 omap_vram_def_sdram_size __initdata; | ||
512 | static u32 omap_vram_def_sdram_start __initdata; | ||
513 | |||
514 | static void __init omap_vram_early_vram(char **p) | ||
515 | { | ||
516 | omap_vram_def_sdram_size = memparse(*p, p); | ||
517 | if (**p == ',') | ||
518 | omap_vram_def_sdram_start = simple_strtoul((*p) + 1, p, 16); | ||
519 | } | ||
520 | __early_param("vram=", omap_vram_early_vram); | ||
521 | |||
522 | /* | ||
523 | * Called from map_io. We need to call to this early enough so that we | ||
524 | * can reserve the fixed SDRAM regions before VM could get hold of them. | ||
525 | */ | ||
526 | void __init omap_vram_reserve_sdram(void) | ||
527 | { | ||
528 | struct bootmem_data *bdata; | ||
529 | unsigned long sdram_start, sdram_size; | ||
530 | u32 paddr; | ||
531 | u32 size = 0; | ||
532 | |||
533 | /* cmdline arg overrides the board file definition */ | ||
534 | if (omap_vram_def_sdram_size) { | ||
535 | size = omap_vram_def_sdram_size; | ||
536 | paddr = omap_vram_def_sdram_start; | ||
537 | } | ||
538 | |||
539 | if (!size) { | ||
540 | size = omap_vram_sdram_size; | ||
541 | paddr = omap_vram_sdram_start; | ||
542 | } | ||
543 | |||
544 | #ifdef CONFIG_OMAP2_VRAM_SIZE | ||
545 | if (!size) { | ||
546 | size = CONFIG_OMAP2_VRAM_SIZE * 1024 * 1024; | ||
547 | paddr = 0; | ||
548 | } | ||
549 | #endif | ||
550 | |||
551 | if (!size) | ||
552 | return; | ||
553 | |||
554 | size = PAGE_ALIGN(size); | ||
555 | |||
556 | bdata = NODE_DATA(0)->bdata; | ||
557 | sdram_start = bdata->node_min_pfn << PAGE_SHIFT; | ||
558 | sdram_size = (bdata->node_low_pfn << PAGE_SHIFT) - sdram_start; | ||
559 | |||
560 | if (paddr) { | ||
561 | if ((paddr & ~PAGE_MASK) || paddr < sdram_start || | ||
562 | paddr + size > sdram_start + sdram_size) { | ||
563 | pr_err("Illegal SDRAM region for VRAM\n"); | ||
564 | return; | ||
565 | } | ||
566 | |||
567 | if (reserve_bootmem(paddr, size, BOOTMEM_EXCLUSIVE) < 0) { | ||
568 | pr_err("FB: failed to reserve VRAM\n"); | ||
569 | return; | ||
570 | } | ||
571 | } else { | ||
572 | if (size > sdram_size) { | ||
573 | pr_err("Illegal SDRAM size for VRAM\n"); | ||
574 | return; | ||
575 | } | ||
576 | |||
577 | paddr = virt_to_phys(alloc_bootmem_pages(size)); | ||
578 | BUG_ON(paddr & ~PAGE_MASK); | ||
579 | } | ||
580 | |||
581 | omap_vram_add_region(paddr, size); | ||
582 | |||
583 | pr_info("Reserving %u bytes SDRAM for VRAM\n", size); | ||
584 | } | ||
585 | |||
586 | /* | ||
587 | * Called at sram init time, before anything is pushed to the SRAM stack. | ||
588 | * Because of the stack scheme, we will allocate everything from the | ||
589 | * start of the lowest address region to the end of SRAM. This will also | ||
590 | * include padding for page alignment and possible holes between regions. | ||
591 | * | ||
592 | * As opposed to the SDRAM case, we'll also do any dynamic allocations at | ||
593 | * this point, since the driver built as a module would have problem with | ||
594 | * freeing / reallocating the regions. | ||
595 | */ | ||
596 | unsigned long __init omap_vram_reserve_sram(unsigned long sram_pstart, | ||
597 | unsigned long sram_vstart, | ||
598 | unsigned long sram_size, | ||
599 | unsigned long pstart_avail, | ||
600 | unsigned long size_avail) | ||
601 | { | ||
602 | unsigned long pend_avail; | ||
603 | unsigned long reserved; | ||
604 | u32 paddr; | ||
605 | u32 size; | ||
606 | |||
607 | paddr = omap_vram_sram_start; | ||
608 | size = omap_vram_sram_size; | ||
609 | |||
610 | if (!size) | ||
611 | return 0; | ||
612 | |||
613 | reserved = 0; | ||
614 | pend_avail = pstart_avail + size_avail; | ||
615 | |||
616 | if (!paddr) { | ||
617 | /* Dynamic allocation */ | ||
618 | if ((size_avail & PAGE_MASK) < size) { | ||
619 | pr_err("Not enough SRAM for VRAM\n"); | ||
620 | return 0; | ||
621 | } | ||
622 | size_avail = (size_avail - size) & PAGE_MASK; | ||
623 | paddr = pstart_avail + size_avail; | ||
624 | } | ||
625 | |||
626 | if (paddr < sram_pstart || | ||
627 | paddr + size > sram_pstart + sram_size) { | ||
628 | pr_err("Illegal SRAM region for VRAM\n"); | ||
629 | return 0; | ||
630 | } | ||
631 | |||
632 | /* Reserve everything above the start of the region. */ | ||
633 | if (pend_avail - paddr > reserved) | ||
634 | reserved = pend_avail - paddr; | ||
635 | size_avail = pend_avail - reserved - pstart_avail; | ||
636 | |||
637 | omap_vram_add_region(paddr, size); | ||
638 | |||
639 | if (reserved) | ||
640 | pr_info("Reserving %lu bytes SRAM for VRAM\n", reserved); | ||
641 | |||
642 | return reserved; | ||
643 | } | ||
644 | |||
645 | void __init omap_vram_set_sdram_vram(u32 size, u32 start) | ||
646 | { | ||
647 | omap_vram_sdram_start = start; | ||
648 | omap_vram_sdram_size = size; | ||
649 | } | ||
650 | |||
651 | void __init omap_vram_set_sram_vram(u32 size, u32 start) | ||
652 | { | ||
653 | omap_vram_sram_start = start; | ||
654 | omap_vram_sram_size = size; | ||
655 | } | ||
diff --git a/drivers/video/omap2/vrfb.c b/drivers/video/omap2/vrfb.c new file mode 100644 index 000000000000..fd2271600370 --- /dev/null +++ b/drivers/video/omap2/vrfb.c | |||
@@ -0,0 +1,315 @@ | |||
1 | /* | ||
2 | * VRFB Rotation Engine | ||
3 | * | ||
4 | * Copyright (C) 2009 Nokia Corporation | ||
5 | * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> | ||
6 | * | ||
7 | * This program is free software; you can redistribute it and/or modify | ||
8 | * it under the terms of the GNU General Public License version 2 as | ||
9 | * published by the Free Software Foundation. | ||
10 | * | ||
11 | * This program is distributed in the hope that it will be useful, but | ||
12 | * WITHOUT ANY WARRANTY; without even the implied warranty of | ||
13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | ||
14 | * General Public License for more details. | ||
15 | * | ||
16 | * You should have received a copy of the GNU General Public License along | ||
17 | * with this program; if not, write to the Free Software Foundation, Inc., | ||
18 | * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. | ||
19 | */ | ||
20 | |||
21 | /*#define DEBUG*/ | ||
22 | |||
23 | #include <linux/kernel.h> | ||
24 | #include <linux/module.h> | ||
25 | #include <linux/ioport.h> | ||
26 | #include <linux/io.h> | ||
27 | #include <linux/bitops.h> | ||
28 | #include <linux/mutex.h> | ||
29 | |||
30 | #include <mach/io.h> | ||
31 | #include <plat/vrfb.h> | ||
32 | #include <plat/sdrc.h> | ||
33 | |||
34 | #ifdef DEBUG | ||
35 | #define DBG(format, ...) pr_debug("VRFB: " format, ## __VA_ARGS__) | ||
36 | #else | ||
37 | #define DBG(format, ...) | ||
38 | #endif | ||
39 | |||
40 | #define SMS_ROT_VIRT_BASE(context, rot) \ | ||
41 | (((context >= 4) ? 0xD0000000 : 0x70000000) \ | ||
42 | + (0x4000000 * (context)) \ | ||
43 | + (0x1000000 * (rot))) | ||
44 | |||
45 | #define OMAP_VRFB_SIZE (2048 * 2048 * 4) | ||
46 | |||
47 | #define VRFB_PAGE_WIDTH_EXP 5 /* Assuming SDRAM pagesize= 1024 */ | ||
48 | #define VRFB_PAGE_HEIGHT_EXP 5 /* 1024 = 2^5 * 2^5 */ | ||
49 | #define VRFB_PAGE_WIDTH (1 << VRFB_PAGE_WIDTH_EXP) | ||
50 | #define VRFB_PAGE_HEIGHT (1 << VRFB_PAGE_HEIGHT_EXP) | ||
51 | #define SMS_IMAGEHEIGHT_OFFSET 16 | ||
52 | #define SMS_IMAGEWIDTH_OFFSET 0 | ||
53 | #define SMS_PH_OFFSET 8 | ||
54 | #define SMS_PW_OFFSET 4 | ||
55 | #define SMS_PS_OFFSET 0 | ||
56 | |||
57 | #define VRFB_NUM_CTXS 12 | ||
58 | /* bitmap of reserved contexts */ | ||
59 | static unsigned long ctx_map; | ||
60 | |||
61 | static DEFINE_MUTEX(ctx_lock); | ||
62 | |||
63 | /* | ||
64 | * Access to this happens from client drivers or the PM core after wake-up. | ||
65 | * For the first case we require locking at the driver level, for the second | ||
66 | * we don't need locking, since no drivers will run until after the wake-up | ||
67 | * has finished. | ||
68 | */ | ||
69 | static struct { | ||
70 | u32 physical_ba; | ||
71 | u32 control; | ||
72 | u32 size; | ||
73 | } vrfb_hw_context[VRFB_NUM_CTXS]; | ||
74 | |||
75 | static inline void restore_hw_context(int ctx) | ||
76 | { | ||
77 | omap2_sms_write_rot_control(vrfb_hw_context[ctx].control, ctx); | ||
78 | omap2_sms_write_rot_size(vrfb_hw_context[ctx].size, ctx); | ||
79 | omap2_sms_write_rot_physical_ba(vrfb_hw_context[ctx].physical_ba, ctx); | ||
80 | } | ||
81 | |||
82 | static u32 get_image_width_roundup(u16 width, u8 bytespp) | ||
83 | { | ||
84 | unsigned long stride = width * bytespp; | ||
85 | unsigned long ceil_pages_per_stride = (stride / VRFB_PAGE_WIDTH) + | ||
86 | (stride % VRFB_PAGE_WIDTH != 0); | ||
87 | |||
88 | return ceil_pages_per_stride * VRFB_PAGE_WIDTH / bytespp; | ||
89 | } | ||
90 | |||
91 | /* | ||
92 | * This the extra space needed in the VRFB physical area for VRFB to safely wrap | ||
93 | * any memory accesses to the invisible part of the virtual view to the physical | ||
94 | * area. | ||
95 | */ | ||
96 | static inline u32 get_extra_physical_size(u16 image_width_roundup, u8 bytespp) | ||
97 | { | ||
98 | return (OMAP_VRFB_LINE_LEN - image_width_roundup) * VRFB_PAGE_HEIGHT * | ||
99 | bytespp; | ||
100 | } | ||
101 | |||
102 | void omap_vrfb_restore_context(void) | ||
103 | { | ||
104 | int i; | ||
105 | unsigned long map = ctx_map; | ||
106 | |||
107 | for (i = ffs(map); i; i = ffs(map)) { | ||
108 | /* i=1..32 */ | ||
109 | i--; | ||
110 | map &= ~(1 << i); | ||
111 | restore_hw_context(i); | ||
112 | } | ||
113 | } | ||
114 | |||
115 | void omap_vrfb_adjust_size(u16 *width, u16 *height, | ||
116 | u8 bytespp) | ||
117 | { | ||
118 | *width = ALIGN(*width * bytespp, VRFB_PAGE_WIDTH) / bytespp; | ||
119 | *height = ALIGN(*height, VRFB_PAGE_HEIGHT); | ||
120 | } | ||
121 | EXPORT_SYMBOL(omap_vrfb_adjust_size); | ||
122 | |||
123 | u32 omap_vrfb_min_phys_size(u16 width, u16 height, u8 bytespp) | ||
124 | { | ||
125 | unsigned long image_width_roundup = get_image_width_roundup(width, | ||
126 | bytespp); | ||
127 | |||
128 | if (image_width_roundup > OMAP_VRFB_LINE_LEN) | ||
129 | return 0; | ||
130 | |||
131 | return (width * height * bytespp) + get_extra_physical_size( | ||
132 | image_width_roundup, bytespp); | ||
133 | } | ||
134 | EXPORT_SYMBOL(omap_vrfb_min_phys_size); | ||
135 | |||
136 | u16 omap_vrfb_max_height(u32 phys_size, u16 width, u8 bytespp) | ||
137 | { | ||
138 | unsigned long image_width_roundup = get_image_width_roundup(width, | ||
139 | bytespp); | ||
140 | unsigned long height; | ||
141 | unsigned long extra; | ||
142 | |||
143 | if (image_width_roundup > OMAP_VRFB_LINE_LEN) | ||
144 | return 0; | ||
145 | |||
146 | extra = get_extra_physical_size(image_width_roundup, bytespp); | ||
147 | |||
148 | if (phys_size < extra) | ||
149 | return 0; | ||
150 | |||
151 | height = (phys_size - extra) / (width * bytespp); | ||
152 | |||
153 | /* Virtual views provided by VRFB are limited to 2048x2048. */ | ||
154 | return min_t(unsigned long, height, 2048); | ||
155 | } | ||
156 | EXPORT_SYMBOL(omap_vrfb_max_height); | ||
157 | |||
158 | void omap_vrfb_setup(struct vrfb *vrfb, unsigned long paddr, | ||
159 | u16 width, u16 height, | ||
160 | unsigned bytespp, bool yuv_mode) | ||
161 | { | ||
162 | unsigned pixel_size_exp; | ||
163 | u16 vrfb_width; | ||
164 | u16 vrfb_height; | ||
165 | u8 ctx = vrfb->context; | ||
166 | u32 size; | ||
167 | u32 control; | ||
168 | |||
169 | DBG("omapfb_set_vrfb(%d, %lx, %dx%d, %d, %d)\n", ctx, paddr, | ||
170 | width, height, bytespp, yuv_mode); | ||
171 | |||
172 | /* For YUV2 and UYVY modes VRFB needs to handle pixels a bit | ||
173 | * differently. See TRM. */ | ||
174 | if (yuv_mode) { | ||
175 | bytespp *= 2; | ||
176 | width /= 2; | ||
177 | } | ||
178 | |||
179 | if (bytespp == 4) | ||
180 | pixel_size_exp = 2; | ||
181 | else if (bytespp == 2) | ||
182 | pixel_size_exp = 1; | ||
183 | else | ||
184 | BUG(); | ||
185 | |||
186 | vrfb_width = ALIGN(width * bytespp, VRFB_PAGE_WIDTH) / bytespp; | ||
187 | vrfb_height = ALIGN(height, VRFB_PAGE_HEIGHT); | ||
188 | |||
189 | DBG("vrfb w %u, h %u bytespp %d\n", vrfb_width, vrfb_height, bytespp); | ||
190 | |||
191 | size = vrfb_width << SMS_IMAGEWIDTH_OFFSET; | ||
192 | size |= vrfb_height << SMS_IMAGEHEIGHT_OFFSET; | ||
193 | |||
194 | control = pixel_size_exp << SMS_PS_OFFSET; | ||
195 | control |= VRFB_PAGE_WIDTH_EXP << SMS_PW_OFFSET; | ||
196 | control |= VRFB_PAGE_HEIGHT_EXP << SMS_PH_OFFSET; | ||
197 | |||
198 | vrfb_hw_context[ctx].physical_ba = paddr; | ||
199 | vrfb_hw_context[ctx].size = size; | ||
200 | vrfb_hw_context[ctx].control = control; | ||
201 | |||
202 | omap2_sms_write_rot_physical_ba(paddr, ctx); | ||
203 | omap2_sms_write_rot_size(size, ctx); | ||
204 | omap2_sms_write_rot_control(control, ctx); | ||
205 | |||
206 | DBG("vrfb offset pixels %d, %d\n", | ||
207 | vrfb_width - width, vrfb_height - height); | ||
208 | |||
209 | vrfb->xres = width; | ||
210 | vrfb->yres = height; | ||
211 | vrfb->xoffset = vrfb_width - width; | ||
212 | vrfb->yoffset = vrfb_height - height; | ||
213 | vrfb->bytespp = bytespp; | ||
214 | vrfb->yuv_mode = yuv_mode; | ||
215 | } | ||
216 | EXPORT_SYMBOL(omap_vrfb_setup); | ||
217 | |||
218 | int omap_vrfb_map_angle(struct vrfb *vrfb, u16 height, u8 rot) | ||
219 | { | ||
220 | unsigned long size = height * OMAP_VRFB_LINE_LEN * vrfb->bytespp; | ||
221 | |||
222 | vrfb->vaddr[rot] = ioremap_wc(vrfb->paddr[rot], size); | ||
223 | |||
224 | if (!vrfb->vaddr[rot]) { | ||
225 | printk(KERN_ERR "vrfb: ioremap failed\n"); | ||
226 | return -ENOMEM; | ||
227 | } | ||
228 | |||
229 | DBG("ioremapped vrfb area %d of size %lu into %p\n", rot, size, | ||
230 | vrfb->vaddr[rot]); | ||
231 | |||
232 | return 0; | ||
233 | } | ||
234 | EXPORT_SYMBOL(omap_vrfb_map_angle); | ||
235 | |||
236 | void omap_vrfb_release_ctx(struct vrfb *vrfb) | ||
237 | { | ||
238 | int rot; | ||
239 | int ctx = vrfb->context; | ||
240 | |||
241 | if (ctx == 0xff) | ||
242 | return; | ||
243 | |||
244 | DBG("release ctx %d\n", ctx); | ||
245 | |||
246 | mutex_lock(&ctx_lock); | ||
247 | |||
248 | BUG_ON(!(ctx_map & (1 << ctx))); | ||
249 | |||
250 | clear_bit(ctx, &ctx_map); | ||
251 | |||
252 | for (rot = 0; rot < 4; ++rot) { | ||
253 | if (vrfb->paddr[rot]) { | ||
254 | release_mem_region(vrfb->paddr[rot], OMAP_VRFB_SIZE); | ||
255 | vrfb->paddr[rot] = 0; | ||
256 | } | ||
257 | } | ||
258 | |||
259 | vrfb->context = 0xff; | ||
260 | |||
261 | mutex_unlock(&ctx_lock); | ||
262 | } | ||
263 | EXPORT_SYMBOL(omap_vrfb_release_ctx); | ||
264 | |||
265 | int omap_vrfb_request_ctx(struct vrfb *vrfb) | ||
266 | { | ||
267 | int rot; | ||
268 | u32 paddr; | ||
269 | u8 ctx; | ||
270 | int r; | ||
271 | |||
272 | DBG("request ctx\n"); | ||
273 | |||
274 | mutex_lock(&ctx_lock); | ||
275 | |||
276 | for (ctx = 0; ctx < VRFB_NUM_CTXS; ++ctx) | ||
277 | if ((ctx_map & (1 << ctx)) == 0) | ||
278 | break; | ||
279 | |||
280 | if (ctx == VRFB_NUM_CTXS) { | ||
281 | pr_err("vrfb: no free contexts\n"); | ||
282 | r = -EBUSY; | ||
283 | goto out; | ||
284 | } | ||
285 | |||
286 | DBG("found free ctx %d\n", ctx); | ||
287 | |||
288 | set_bit(ctx, &ctx_map); | ||
289 | |||
290 | memset(vrfb, 0, sizeof(*vrfb)); | ||
291 | |||
292 | vrfb->context = ctx; | ||
293 | |||
294 | for (rot = 0; rot < 4; ++rot) { | ||
295 | paddr = SMS_ROT_VIRT_BASE(ctx, rot); | ||
296 | if (!request_mem_region(paddr, OMAP_VRFB_SIZE, "vrfb")) { | ||
297 | pr_err("vrfb: failed to reserve VRFB " | ||
298 | "area for ctx %d, rotation %d\n", | ||
299 | ctx, rot * 90); | ||
300 | omap_vrfb_release_ctx(vrfb); | ||
301 | r = -ENOMEM; | ||
302 | goto out; | ||
303 | } | ||
304 | |||
305 | vrfb->paddr[rot] = paddr; | ||
306 | |||
307 | DBG("VRFB %d/%d: %lx\n", ctx, rot*90, vrfb->paddr[rot]); | ||
308 | } | ||
309 | |||
310 | r = 0; | ||
311 | out: | ||
312 | mutex_unlock(&ctx_lock); | ||
313 | return r; | ||
314 | } | ||
315 | EXPORT_SYMBOL(omap_vrfb_request_ctx); | ||
diff --git a/include/linux/omapfb.h b/include/linux/omapfb.h new file mode 100644 index 000000000000..f46c40ac6d45 --- /dev/null +++ b/include/linux/omapfb.h | |||
@@ -0,0 +1,251 @@ | |||
1 | /* | ||
2 | * File: include/linux/omapfb.h | ||
3 | * | ||
4 | * Framebuffer driver for TI OMAP boards | ||
5 | * | ||
6 | * Copyright (C) 2004 Nokia Corporation | ||
7 | * Author: Imre Deak <imre.deak@nokia.com> | ||
8 | * | ||
9 | * This program is free software; you can redistribute it and/or modify it | ||
10 | * under the terms of the GNU General Public License as published by the | ||
11 | * Free Software Foundation; either version 2 of the License, or (at your | ||
12 | * option) any later version. | ||
13 | * | ||
14 | * This program is distributed in the hope that it will be useful, but | ||
15 | * WITHOUT ANY WARRANTY; without even the implied warranty of | ||
16 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | ||
17 | * General Public License for more details. | ||
18 | * | ||
19 | * You should have received a copy of the GNU General Public License along | ||
20 | * with this program; if not, write to the Free Software Foundation, Inc., | ||
21 | * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. | ||
22 | */ | ||
23 | |||
24 | #ifndef __LINUX_OMAPFB_H__ | ||
25 | #define __LINUX_OMAPFB_H__ | ||
26 | |||
27 | #include <linux/fb.h> | ||
28 | #include <linux/ioctl.h> | ||
29 | #include <linux/types.h> | ||
30 | |||
31 | /* IOCTL commands. */ | ||
32 | |||
33 | #define OMAP_IOW(num, dtype) _IOW('O', num, dtype) | ||
34 | #define OMAP_IOR(num, dtype) _IOR('O', num, dtype) | ||
35 | #define OMAP_IOWR(num, dtype) _IOWR('O', num, dtype) | ||
36 | #define OMAP_IO(num) _IO('O', num) | ||
37 | |||
38 | #define OMAPFB_MIRROR OMAP_IOW(31, int) | ||
39 | #define OMAPFB_SYNC_GFX OMAP_IO(37) | ||
40 | #define OMAPFB_VSYNC OMAP_IO(38) | ||
41 | #define OMAPFB_SET_UPDATE_MODE OMAP_IOW(40, int) | ||
42 | #define OMAPFB_GET_CAPS OMAP_IOR(42, struct omapfb_caps) | ||
43 | #define OMAPFB_GET_UPDATE_MODE OMAP_IOW(43, int) | ||
44 | #define OMAPFB_LCD_TEST OMAP_IOW(45, int) | ||
45 | #define OMAPFB_CTRL_TEST OMAP_IOW(46, int) | ||
46 | #define OMAPFB_UPDATE_WINDOW_OLD OMAP_IOW(47, struct omapfb_update_window_old) | ||
47 | #define OMAPFB_SET_COLOR_KEY OMAP_IOW(50, struct omapfb_color_key) | ||
48 | #define OMAPFB_GET_COLOR_KEY OMAP_IOW(51, struct omapfb_color_key) | ||
49 | #define OMAPFB_SETUP_PLANE OMAP_IOW(52, struct omapfb_plane_info) | ||
50 | #define OMAPFB_QUERY_PLANE OMAP_IOW(53, struct omapfb_plane_info) | ||
51 | #define OMAPFB_UPDATE_WINDOW OMAP_IOW(54, struct omapfb_update_window) | ||
52 | #define OMAPFB_SETUP_MEM OMAP_IOW(55, struct omapfb_mem_info) | ||
53 | #define OMAPFB_QUERY_MEM OMAP_IOW(56, struct omapfb_mem_info) | ||
54 | #define OMAPFB_WAITFORVSYNC OMAP_IO(57) | ||
55 | #define OMAPFB_MEMORY_READ OMAP_IOR(58, struct omapfb_memory_read) | ||
56 | #define OMAPFB_GET_OVERLAY_COLORMODE OMAP_IOR(59, struct omapfb_ovl_colormode) | ||
57 | #define OMAPFB_WAITFORGO OMAP_IO(60) | ||
58 | #define OMAPFB_GET_VRAM_INFO OMAP_IOR(61, struct omapfb_vram_info) | ||
59 | #define OMAPFB_SET_TEARSYNC OMAP_IOW(62, struct omapfb_tearsync_info) | ||
60 | |||
61 | #define OMAPFB_CAPS_GENERIC_MASK 0x00000fff | ||
62 | #define OMAPFB_CAPS_LCDC_MASK 0x00fff000 | ||
63 | #define OMAPFB_CAPS_PANEL_MASK 0xff000000 | ||
64 | |||
65 | #define OMAPFB_CAPS_MANUAL_UPDATE 0x00001000 | ||
66 | #define OMAPFB_CAPS_TEARSYNC 0x00002000 | ||
67 | #define OMAPFB_CAPS_PLANE_RELOCATE_MEM 0x00004000 | ||
68 | #define OMAPFB_CAPS_PLANE_SCALE 0x00008000 | ||
69 | #define OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE 0x00010000 | ||
70 | #define OMAPFB_CAPS_WINDOW_SCALE 0x00020000 | ||
71 | #define OMAPFB_CAPS_WINDOW_OVERLAY 0x00040000 | ||
72 | #define OMAPFB_CAPS_WINDOW_ROTATE 0x00080000 | ||
73 | #define OMAPFB_CAPS_SET_BACKLIGHT 0x01000000 | ||
74 | |||
75 | /* Values from DSP must map to lower 16-bits */ | ||
76 | #define OMAPFB_FORMAT_MASK 0x00ff | ||
77 | #define OMAPFB_FORMAT_FLAG_DOUBLE 0x0100 | ||
78 | #define OMAPFB_FORMAT_FLAG_TEARSYNC 0x0200 | ||
79 | #define OMAPFB_FORMAT_FLAG_FORCE_VSYNC 0x0400 | ||
80 | #define OMAPFB_FORMAT_FLAG_ENABLE_OVERLAY 0x0800 | ||
81 | #define OMAPFB_FORMAT_FLAG_DISABLE_OVERLAY 0x1000 | ||
82 | |||
83 | #define OMAPFB_MEMTYPE_SDRAM 0 | ||
84 | #define OMAPFB_MEMTYPE_SRAM 1 | ||
85 | #define OMAPFB_MEMTYPE_MAX 1 | ||
86 | |||
87 | enum omapfb_color_format { | ||
88 | OMAPFB_COLOR_RGB565 = 0, | ||
89 | OMAPFB_COLOR_YUV422, | ||
90 | OMAPFB_COLOR_YUV420, | ||
91 | OMAPFB_COLOR_CLUT_8BPP, | ||
92 | OMAPFB_COLOR_CLUT_4BPP, | ||
93 | OMAPFB_COLOR_CLUT_2BPP, | ||
94 | OMAPFB_COLOR_CLUT_1BPP, | ||
95 | OMAPFB_COLOR_RGB444, | ||
96 | OMAPFB_COLOR_YUY422, | ||
97 | |||
98 | OMAPFB_COLOR_ARGB16, | ||
99 | OMAPFB_COLOR_RGB24U, /* RGB24, 32-bit container */ | ||
100 | OMAPFB_COLOR_RGB24P, /* RGB24, 24-bit container */ | ||
101 | OMAPFB_COLOR_ARGB32, | ||
102 | OMAPFB_COLOR_RGBA32, | ||
103 | OMAPFB_COLOR_RGBX32, | ||
104 | }; | ||
105 | |||
106 | struct omapfb_update_window { | ||
107 | __u32 x, y; | ||
108 | __u32 width, height; | ||
109 | __u32 format; | ||
110 | __u32 out_x, out_y; | ||
111 | __u32 out_width, out_height; | ||
112 | __u32 reserved[8]; | ||
113 | }; | ||
114 | |||
115 | struct omapfb_update_window_old { | ||
116 | __u32 x, y; | ||
117 | __u32 width, height; | ||
118 | __u32 format; | ||
119 | }; | ||
120 | |||
121 | enum omapfb_plane { | ||
122 | OMAPFB_PLANE_GFX = 0, | ||
123 | OMAPFB_PLANE_VID1, | ||
124 | OMAPFB_PLANE_VID2, | ||
125 | }; | ||
126 | |||
127 | enum omapfb_channel_out { | ||
128 | OMAPFB_CHANNEL_OUT_LCD = 0, | ||
129 | OMAPFB_CHANNEL_OUT_DIGIT, | ||
130 | }; | ||
131 | |||
132 | struct omapfb_plane_info { | ||
133 | __u32 pos_x; | ||
134 | __u32 pos_y; | ||
135 | __u8 enabled; | ||
136 | __u8 channel_out; | ||
137 | __u8 mirror; | ||
138 | __u8 reserved1; | ||
139 | __u32 out_width; | ||
140 | __u32 out_height; | ||
141 | __u32 reserved2[12]; | ||
142 | }; | ||
143 | |||
144 | struct omapfb_mem_info { | ||
145 | __u32 size; | ||
146 | __u8 type; | ||
147 | __u8 reserved[3]; | ||
148 | }; | ||
149 | |||
150 | struct omapfb_caps { | ||
151 | __u32 ctrl; | ||
152 | __u32 plane_color; | ||
153 | __u32 wnd_color; | ||
154 | }; | ||
155 | |||
156 | enum omapfb_color_key_type { | ||
157 | OMAPFB_COLOR_KEY_DISABLED = 0, | ||
158 | OMAPFB_COLOR_KEY_GFX_DST, | ||
159 | OMAPFB_COLOR_KEY_VID_SRC, | ||
160 | }; | ||
161 | |||
162 | struct omapfb_color_key { | ||
163 | __u8 channel_out; | ||
164 | __u32 background; | ||
165 | __u32 trans_key; | ||
166 | __u8 key_type; | ||
167 | }; | ||
168 | |||
169 | enum omapfb_update_mode { | ||
170 | OMAPFB_UPDATE_DISABLED = 0, | ||
171 | OMAPFB_AUTO_UPDATE, | ||
172 | OMAPFB_MANUAL_UPDATE | ||
173 | }; | ||
174 | |||
175 | struct omapfb_memory_read { | ||
176 | __u16 x; | ||
177 | __u16 y; | ||
178 | __u16 w; | ||
179 | __u16 h; | ||
180 | size_t buffer_size; | ||
181 | void __user *buffer; | ||
182 | }; | ||
183 | |||
184 | struct omapfb_ovl_colormode { | ||
185 | __u8 overlay_idx; | ||
186 | __u8 mode_idx; | ||
187 | __u32 bits_per_pixel; | ||
188 | __u32 nonstd; | ||
189 | struct fb_bitfield red; | ||
190 | struct fb_bitfield green; | ||
191 | struct fb_bitfield blue; | ||
192 | struct fb_bitfield transp; | ||
193 | }; | ||
194 | |||
195 | struct omapfb_vram_info { | ||
196 | __u32 total; | ||
197 | __u32 free; | ||
198 | __u32 largest_free_block; | ||
199 | __u32 reserved[5]; | ||
200 | }; | ||
201 | |||
202 | struct omapfb_tearsync_info { | ||
203 | __u8 enabled; | ||
204 | __u8 reserved1[3]; | ||
205 | __u16 line; | ||
206 | __u16 reserved2; | ||
207 | }; | ||
208 | |||
209 | #ifdef __KERNEL__ | ||
210 | |||
211 | #include <plat/board.h> | ||
212 | |||
213 | #ifdef CONFIG_ARCH_OMAP1 | ||
214 | #define OMAPFB_PLANE_NUM 1 | ||
215 | #else | ||
216 | #define OMAPFB_PLANE_NUM 3 | ||
217 | #endif | ||
218 | |||
219 | struct omapfb_mem_region { | ||
220 | u32 paddr; | ||
221 | void __iomem *vaddr; | ||
222 | unsigned long size; | ||
223 | u8 type; /* OMAPFB_PLANE_MEM_* */ | ||
224 | enum omapfb_color_format format;/* OMAPFB_COLOR_* */ | ||
225 | unsigned format_used:1; /* Must be set when format is set. | ||
226 | * Needed b/c of the badly chosen 0 | ||
227 | * base for OMAPFB_COLOR_* values | ||
228 | */ | ||
229 | unsigned alloc:1; /* allocated by the driver */ | ||
230 | unsigned map:1; /* kernel mapped by the driver */ | ||
231 | }; | ||
232 | |||
233 | struct omapfb_mem_desc { | ||
234 | int region_cnt; | ||
235 | struct omapfb_mem_region region[OMAPFB_PLANE_NUM]; | ||
236 | }; | ||
237 | |||
238 | struct omapfb_platform_data { | ||
239 | struct omap_lcd_config lcd; | ||
240 | struct omapfb_mem_desc mem_desc; | ||
241 | void *ctrl_platform_data; | ||
242 | }; | ||
243 | |||
244 | /* in arch/arm/plat-omap/fb.c */ | ||
245 | extern void omapfb_set_platform_data(struct omapfb_platform_data *data); | ||
246 | extern void omapfb_set_ctrl_platform_data(void *pdata); | ||
247 | extern void omapfb_reserve_sdram(void); | ||
248 | |||
249 | #endif | ||
250 | |||
251 | #endif /* __OMAPFB_H */ | ||