134 files changed, 183 insertions, 207 deletions
diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
index bf88f71a21f4..aa0e0c51cc08 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -15,8 +15,8 @@
 *  May be copied or modified under the terms of the GNU General Public License
 *  Based in part on the ITE vendor provided SCSI driver.
 *
- *  Documentation available from
+ *  Documentation available from IT8212F_V04.pdf
- *      http://www.ite.com.tw/pc/IT8212F_V04.pdf
+ *      http://www.ite.com.tw/EN/products_more.aspx?CategoryID=3&ID=5,91
 *  Some other documents are NDA.
 *
 *  The ITE8212 isn't exactly a standard IDE controller. It has two
diff --git a/drivers/atm/Kconfig b/drivers/atm/Kconfig
index be7461c9a87e..31c60101a69a 100644
--- a/drivers/atm/Kconfig
+++ b/drivers/atm/Kconfig
@@ -301,7 +301,7 @@ config ATM_IA
          control memory (128K-1KVC, 512K-4KVC), the size of the packet
          memory (128K, 512K, 1M), and the PHY type (Single/Multi mode OC3,
          UTP155, UTP25, DS3 and E3). Go to:
-                <http://www.iphase.com/products/ClassSheet.cfm?ClassID=ATM>
+                <http://www.iphase.com/>
          for more info about the cards. Say Y (or M to compile as a module
          named iphase) here if you have one of these cards.
diff --git a/drivers/char/agp/Kconfig b/drivers/char/agp/Kconfig
index 4b66c69eaf57..c8ad61958e24 100644
--- a/drivers/char/agp/Kconfig
+++ b/drivers/char/agp/Kconfig
@@ -34,7 +34,7 @@ config AGP_ALI
          X on the following ALi chipsets.  The supported chipsets
          include M1541, M1621, M1631, M1632, M1641,M1647,and M1651.
          For the ALi-chipset question, ALi suggests you refer to
-          <http://www.ali.com.tw/eng/support/index.shtml>.
+          <http://www.ali.com.tw/>.
          The M1541 chipset can do AGP 1x and 2x, but note that there is an
          acknowledged incompatibility with Matrox G200 cards. Due to
diff --git a/drivers/char/agp/i460-agp.c b/drivers/char/agp/i460-agp.c
index e763d3312ce7..75b763cb3ea1 100644
--- a/drivers/char/agp/i460-agp.c
+++ b/drivers/char/agp/i460-agp.c
@@ -1,7 +1,7 @@
 /*
 * For documentation on the i460 AGP interface, see Chapter 7 (AGP Subsystem) of
 * the "Intel 460GTX Chipset Software Developer's Manual":
- * http://developer.intel.com/design/itanium/downloads/24870401s.htm
+ * http://www.intel.com/design/archives/itanium/downloads/248704.htm 
 */
 /*
 * 460GX support by Chris Ahna <christopher.j.ahna@intel.com>
diff --git a/drivers/char/apm-emulation.c b/drivers/char/apm-emulation.c
index 033e1505fca9..0848ca90255d 100644
--- a/drivers/char/apm-emulation.c
+++ b/drivers/char/apm-emulation.c
@@ -7,8 +7,8 @@
 *   Intel Corporation, Microsoft Corporation. Advanced Power Management
 *   (APM) BIOS Interface Specification, Revision 1.2, February 1996.
 *
- * [This document is available from Microsoft at:
+ * This document is available from Microsoft at:
- *    http://www.microsoft.com/hwdev/busbios/amp_12.htm]
+ *    http://www.microsoft.com/whdc/archive/amp_12.mspx
 */
 #include <linux/module.h>
 #include <linux/poll.h>
diff --git a/drivers/char/ipmi/ipmi_bt_sm.c b/drivers/char/ipmi/ipmi_bt_sm.c
index 7b98c067190a..3ed20e8abc0d 100644
--- a/drivers/char/ipmi/ipmi_bt_sm.c
+++ b/drivers/char/ipmi/ipmi_bt_sm.c
@@ -2,7 +2,7 @@
 *  ipmi_bt_sm.c
 *
 *  The state machine for an Open IPMI BT sub-driver under ipmi_si.c, part
- *  of the driver architecture at http://sourceforge.net/project/openipmi
+ *  of the driver architecture at http://sourceforge.net/projects/openipmi 
 *
 *  Author:     Rocky Craig <first.last@hp.com>
 *
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index ff68e7c34ce7..2a84379b9104 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -1965,8 +1965,7 @@ static int acpi_gpe_irq_setup(struct smi_info *info)
 /*
 * Defined at
- * http://h21007.www2.hp.com/dspp/files/unprotected/devresource/
+ * http://h21007.www2.hp.com/portal/download/files/unprot/hpspmi.pdf
- * Docs/TechPapers/IA64/hpspmi.pdf
 */
 struct SPMITable {
        s8      Signature[4];
diff --git a/drivers/char/n_r3964.c b/drivers/char/n_r3964.c
index a98290d7a2c5..88dda0c45ee0 100644
--- a/drivers/char/n_r3964.c
+++ b/drivers/char/n_r3964.c
@@ -4,7 +4,6 @@
 * Copyright by 
 * Philips Automation Projects
 * Kassel (Germany)
- * http://www.pap-philips.de
 * -----------------------------------------------------------
 * This software may be used and distributed according to the terms of
 * the GNU General Public License, incorporated herein by reference.
diff --git a/drivers/char/pcmcia/Kconfig b/drivers/char/pcmcia/Kconfig
index ffa0efce0aed..6614416a8623 100644
--- a/drivers/char/pcmcia/Kconfig
+++ b/drivers/char/pcmcia/Kconfig
@@ -28,7 +28,7 @@ config CARDMAN_4000
          This kernel driver requires additional userspace support, either
          by the vendor-provided PC/SC ifd_handler (http://www.omnikey.com/),
-          or via the cm4000 backend of OpenCT (http://www.opensc.com/).
+          or via the cm4000 backend of OpenCT (http://www.opensc-project.org/opensc).
 config CARDMAN_4040
        tristate "Omnikey CardMan 4040 support"
@@ -41,7 +41,7 @@ config CARDMAN_4040
          in I/O space.  To use the kernel driver, you will need either the
          PC/SC ifdhandler provided from the Omnikey homepage
          (http://www.omnikey.com/), or a current development version of OpenCT
-          (http://www.opensc.org/).
+          (http://www.opensc-project.org/opensc).
 config IPWIRELESS
        tristate "IPWireless 3G UMTS PCMCIA card support"
diff --git a/drivers/char/tpm/Kconfig b/drivers/char/tpm/Kconfig
index 4dc338f3d1aa..f6595aba4f0f 100644
--- a/drivers/char/tpm/Kconfig
+++ b/drivers/char/tpm/Kconfig
@@ -58,6 +58,6 @@ config TCG_INFINEON
          To compile this driver as a module, choose M here; the module
          will be called tpm_infineon.
          Further information on this driver and the supported hardware
-          can be found at http://www.prosec.rub.de/tpm
+          can be found at http://www.trust.rub.de/projects/linux-device-driver-infineon-tpm/ 
 endif # TCG_TPM
diff --git a/drivers/char/tpm/tpm_infineon.c b/drivers/char/tpm/tpm_infineon.c
index f58440791e65..76da32e11f18 100644
--- a/drivers/char/tpm/tpm_infineon.c
+++ b/drivers/char/tpm/tpm_infineon.c
@@ -7,7 +7,7 @@
 * Copyright (C) 2005, Marcel Selhorst <m.selhorst@sirrix.com>
 * Sirrix AG - security technologies, http://www.sirrix.com and
 * Applied Data Security Group, Ruhr-University Bochum, Germany
- * Project-Homepage: http://www.prosec.rub.de/tpm
+ * Project-Homepage: http://www.trust.rub.de/projects/linux-device-driver-infineon-tpm/ 
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
diff --git a/drivers/edac/edac_device_sysfs.c b/drivers/edac/edac_device_sysfs.c
index 070968178a24..413f0dfbbf75 100644
--- a/drivers/edac/edac_device_sysfs.c
+++ b/drivers/edac/edac_device_sysfs.c
@@ -1,7 +1,7 @@
 /*
 * file for managing the edac_device class of devices for EDAC
 *
- * (C) 2007 SoftwareBitMaker (http://www.softwarebitmaker.com)
+ * (C) 2007 SoftwareBitMaker 
 *
 * This file may be distributed under the terms of the
 * GNU General Public License.
diff --git a/drivers/edac/i82443bxgx_edac.c b/drivers/edac/i82443bxgx_edac.c
index a2fa1feed724..678405ab04e4 100644
--- a/drivers/edac/i82443bxgx_edac.c
+++ b/drivers/edac/i82443bxgx_edac.c
@@ -12,7 +12,7 @@
 * 440GX fix by Jason Uhlenkott <juhlenko@akamai.com>.
 *
 * Written with reference to 82443BX Host Bridge Datasheet:
- * http://www.intel.com/design/chipsets/440/documentation.htm
+ * http://download.intel.com/design/chipsets/datashts/29063301.pdf 
 * references to this document given in [].
 *
 * This module doesn't support the 440LX, but it may be possible to
diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index a6c670b8ce52..af39bbd7394d 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -74,7 +74,8 @@ config EFI_PCDP
          You must also enable the appropriate drivers (serial, VGA, etc.)
-          See <http://www.dig64.org/specifications/DIG64_HCDPv20_042804.pdf>
+          See DIG64_HCDPv20_042804.pdf available from
+          <http://www.dig64.org/specifications/> 
 config DELL_RBU
        tristate "BIOS update support for DELL systems via sysfs"
diff --git a/drivers/firmware/edd.c b/drivers/firmware/edd.c
index f287fe79edc4..96c25d93eed1 100644
--- a/drivers/firmware/edd.c
+++ b/drivers/firmware/edd.c
@@ -15,7 +15,7 @@
 * made in setup.S, copied to safe structures in setup.c,
 * and presents it in sysfs.
 *
- * Please see http://linux.dell.com/edd30/results.html for
+ * Please see http://linux.dell.com/edd/results.html for
 * the list of BIOSs which have been reported to implement EDD.
 *
 * This program is free software; you can redistribute it and/or modify
diff --git a/drivers/firmware/pcdp.h b/drivers/firmware/pcdp.h
index ce910d68bd19..e5530608e00d 100644
--- a/drivers/firmware/pcdp.h
+++ b/drivers/firmware/pcdp.h
@@ -1,8 +1,8 @@
 /*
 * Definitions for PCDP-defined console devices
 *
- * v1.0a: http://www.dig64.org/specifications/DIG64_HCDPv10a_01.pdf
+ * For DIG64_HCDPv10a_01.pdf and DIG64_PCDPv20.pdf (v1.0a and v2.0 resp.),
- * v2.0:  http://www.dig64.org/specifications/DIG64_PCDPv20.pdf
+ * please see <http://www.dig64.org/specifications/>
 *
 * (c) Copyright 2002, 2004 Hewlett-Packard Development Company, L.P.
 *      Khalid Aziz <khalid.aziz@hp.com>
diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index f1f473ea97d3..045d63e374c3 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -76,7 +76,7 @@ EXPORT_SYMBOL(drm_mode_debug_printmodeline);
 * according to the hdisplay, vdisplay, vrefresh.
 * It is based from the VESA(TM) Coordinated Video Timing Generator by
 * Graham Loveridge April 9, 2003 available at
- * http://www.vesa.org/public/CVT/CVTd6r1.xls
+ * http://www.elo.utfsm.cl/~elo212/docs/CVTd6r1.xls 
 *
 * And it is copied from xf86CVTmode in xserver/hw/xfree86/modes/xf86cvt.c.
 * What I have done is to translate it by using integer calculation.
diff --git a/drivers/hwmon/adm1025.c b/drivers/hwmon/adm1025.c
index 251b63165e2a..60befc0ee65f 100644
--- a/drivers/hwmon/adm1025.c
+++ b/drivers/hwmon/adm1025.c
@@ -12,7 +12,7 @@
 * resolution of about 0.5% of the nominal value). Temperature values are
 * reported with a 1 deg resolution and a 3 deg accuracy. Complete
 * datasheet can be obtained from Analog's website at:
- *   http://www.analog.com/Analog_Root/productPage/productHome/0,2121,ADM1025,00.html
+ *   http://www.onsemi.com/PowerSolutions/product.do?id=ADM1025 
 *
 * This driver also supports the ADM1025A, which differs from the ADM1025
 * only in that it has "open-drain VID inputs while the ADM1025 has
diff --git a/drivers/hwmon/adm1026.c b/drivers/hwmon/adm1026.c
index 65335b268fa9..4bf969c0a32b 100644
--- a/drivers/hwmon/adm1026.c
+++ b/drivers/hwmon/adm1026.c
@@ -6,7 +6,7 @@
    Chip details at:
-    <http://www.analog.com/UploadedFiles/Data_Sheets/779263102ADM1026_a.pdf>
+    <http://www.onsemi.com/PowerSolutions/product.do?id=ADM1026>
    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
diff --git a/drivers/hwmon/f75375s.c b/drivers/hwmon/f75375s.c
index 0f58ecc5334d..3e2e10084ad9 100644
--- a/drivers/hwmon/f75375s.c
+++ b/drivers/hwmon/f75375s.c
@@ -6,10 +6,10 @@
 * Datasheets available at:
 *
 * f75375:
- * http://www.fintek.com.tw/files/productfiles/2005111152950.pdf
+ * http://www.fintek.com.tw/files/productfiles/F75375_V026P.pdf 
 *
 * f75373:
- * http://www.fintek.com.tw/files/productfiles/2005111153128.pdf
+ * http://www.fintek.com.tw/files/productfiles/F75373_V025P.pdf
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
diff --git a/drivers/hwmon/g760a.c b/drivers/hwmon/g760a.c
index 1f63d1a3af5e..1d6a6fa31fb4 100644
--- a/drivers/hwmon/g760a.c
+++ b/drivers/hwmon/g760a.c
@@ -5,7 +5,7 @@
    Copyright (C) 2007  Herbert Valerio Riedel <hvr@gnu.org>
    Complete datasheet is available at GMT's website:
-      http://www.gmt.com.tw/datasheet/g760a.pdf
+      http://www.gmt.com.tw/product/datasheet/EDS-760A.pdf 
    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
diff --git a/drivers/hwmon/hwmon-vid.c b/drivers/hwmon/hwmon-vid.c
index bf0862a803c0..2b2ca1694f95 100644
--- a/drivers/hwmon/hwmon-vid.c
+++ b/drivers/hwmon/hwmon-vid.c
@@ -38,7 +38,7 @@
 * available at http://developer.intel.com/.
 *
 * AMD Athlon 64 and AMD Opteron Processors, AMD Publication 26094,
- * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/26094.PDF
+ * http://support.amd.com/us/Processor_TechDocs/26094.PDF 
 * Table 74. VID Code Voltages
 * This corresponds to an arbitrary VRM code of 24 in the functions below.
 * These CPU models (K8 revision <= E) have 5 VID pins. See also:
diff --git a/drivers/ide/hpt366.c b/drivers/ide/hpt366.c
index 45163693f737..97d98fbf5849 100644
--- a/drivers/ide/hpt366.c
+++ b/drivers/ide/hpt366.c
@@ -12,7 +12,7 @@
 *
 *
 * HighPoint has its own drivers (open source except for the RAID part)
- * available from http://www.highpoint-tech.com/BIOS%20+%20Driver/.
+ * available from http://www.highpoint-tech.com/USA_new/service_support.htm 
 * This may be useful to anyone wanting to work on this driver, however  do not
 * trust  them too much since the code tends to become less and less meaningful
 * as the time passes... :-/
diff --git a/drivers/ide/ht6560b.c b/drivers/ide/ht6560b.c
index d81e49680c3f..808bcdcbf8e1 100644
--- a/drivers/ide/ht6560b.c
+++ b/drivers/ide/ht6560b.c
@@ -10,7 +10,6 @@
 *  Author:    Mikko Ala-Fossi            <maf@iki.fi>
 *             Jan Evert van Grootheest   <j.e.van.grootheest@caiway.nl>
 *
- *  Try:  http://www.maf.iki.fi/~maf/ht6560b/
 */
 #define DRV_NAME        "ht6560b"
diff --git a/drivers/infiniband/Kconfig b/drivers/infiniband/Kconfig
index 89d70de5e235..6e35eccc9caa 100644
--- a/drivers/infiniband/Kconfig
+++ b/drivers/infiniband/Kconfig
@@ -16,7 +16,7 @@ config INFINIBAND_USER_MAD
          Userspace InfiniBand Management Datagram (MAD) support.  This
          is the kernel side of the userspace MAD support, which allows
          userspace processes to send and receive MADs. You will also
-          need libibumad from <http://www.openib.org>.
+          need libibumad from <http://www.openfabrics.org/downloads/management/>.
 config INFINIBAND_USER_ACCESS
        tristate "InfiniBand userspace access (verbs and CM)"
@@ -28,7 +28,7 @@ config INFINIBAND_USER_ACCESS
          to set up connections and directly access InfiniBand
          hardware for fast-path operations.  You will also need
          libibverbs, libibcm and a hardware driver library from
-          <http://www.openib.org>.
+          <http://www.openfabrics.org/git/>.
 config INFINIBAND_USER_MEM
        bool
diff --git a/drivers/infiniband/hw/cxgb3/Kconfig b/drivers/infiniband/hw/cxgb3/Kconfig
index 2acec3fadf69..2b6352b85485 100644
--- a/drivers/infiniband/hw/cxgb3/Kconfig
+++ b/drivers/infiniband/hw/cxgb3/Kconfig
@@ -10,7 +10,7 @@ config INFINIBAND_CXGB3
          our website at <http://www.chelsio.com>.
          For customer support, please visit our customer support page at
-          <http://www.chelsio.com/support.htm>.
+          <http://www.chelsio.com/support.html>.
          Please send feedback to <linux-bugs@chelsio.com>.
diff --git a/drivers/infiniband/hw/cxgb4/Kconfig b/drivers/infiniband/hw/cxgb4/Kconfig
index ccb85eaaad75..6b7e6c543534 100644
--- a/drivers/infiniband/hw/cxgb4/Kconfig
+++ b/drivers/infiniband/hw/cxgb4/Kconfig
@@ -10,7 +10,7 @@ config INFINIBAND_CXGB4
          our website at <http://www.chelsio.com>.
          For customer support, please visit our customer support page at
-          <http://www.chelsio.com/support.htm>.
+          <http://www.chelsio.com/support.html>.
          Please send feedback to <linux-bugs@chelsio.com>.
diff --git a/drivers/infiniband/ulp/iser/Kconfig b/drivers/infiniband/ulp/iser/Kconfig
index b411c51842da..d00af71a2cfc 100644
--- a/drivers/infiniband/ulp/iser/Kconfig
+++ b/drivers/infiniband/ulp/iser/Kconfig
@@ -9,4 +9,4 @@ config INFINIBAND_ISER
          The iSER protocol is defined by IETF.
          See <http://www.ietf.org/rfc/rfc5046.txt>
-          and <http://www.infinibandta.org/members/spec/Annex_iSER.PDF>
+          and <http://members.infinibandta.org/kwspub/spec/Annex_iSER.PDF>
diff --git a/drivers/input/joystick/gamecon.c b/drivers/input/joystick/gamecon.c
index 0ffaf2c77a19..e68e49786483 100644
--- a/drivers/input/joystick/gamecon.c
+++ b/drivers/input/joystick/gamecon.c
@@ -521,9 +521,8 @@ static void gc_multi_process_packet(struct gc *gc)
 * PSX support
 *
 * See documentation at:
- *      http://www.dim.com/~mackys/psxmemcard/ps-eng2.txt
+ *      http://www.geocities.co.jp/Playtown/2004/psx/ps_eng.txt 
 *      http://www.gamesx.com/controldata/psxcont/psxcont.htm
- *      ftp://milano.usal.es/pablo/
 *
 */
diff --git a/drivers/input/misc/cm109.c b/drivers/input/misc/cm109.c
index 2b0eba6619bd..b09c7d127219 100644
--- a/drivers/input/misc/cm109.c
+++ b/drivers/input/misc/cm109.c
@@ -259,7 +259,7 @@ static unsigned short keymap_usbph01(int scancode)
 /*
 * Keymap for ATCom AU-100
- * http://www.atcom.cn/En_products_AU100.html
+ * http://www.atcom.cn/products.html 
 * http://www.packetizer.com/products/au100/
 * http://www.voip-info.org/wiki/view/AU-100
 *
diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig
index c714ca2407f8..bf5fd7f6a313 100644
--- a/drivers/input/mouse/Kconfig
+++ b/drivers/input/mouse/Kconfig
@@ -30,6 +30,7 @@ config MOUSE_PS2
                <http://w1.894.telia.com/~u89404340/touchpad/index.html>
          and a new version of GPM at:
                <http://www.geocities.com/dt_or/gpm/gpm.html>
+                <http://xorg.freedesktop.org/archive/individual/driver/>
          to take advantage of the advanced features of the touchpad.
          If unsure, say Y.
diff --git a/drivers/input/mouse/touchkit_ps2.c b/drivers/input/mouse/touchkit_ps2.c
index 88121c59c3cc..1fd8f5e192f9 100644
--- a/drivers/input/mouse/touchkit_ps2.c
+++ b/drivers/input/mouse/touchkit_ps2.c
@@ -21,8 +21,8 @@
 *
 * Based upon touchkitusb.c
 *
- * Vendor documentation is available in support section of:
+ * Vendor documentation is available at:
- * http://www.egalax.com.tw/
+ * http://home.eeti.com.tw/web20/drivers/Software%20Programming%20Guide_v2.0.pdf 
 */
 #include <linux/kernel.h>
diff --git a/drivers/input/touchscreen/mk712.c b/drivers/input/touchscreen/mk712.c
index efd3aebaba5f..36e57deacd03 100644
--- a/drivers/input/touchscreen/mk712.c
+++ b/drivers/input/touchscreen/mk712.c
@@ -17,7 +17,7 @@
 * found in Gateway AOL Connected Touchpad computers.
 *
 * Documentation for ICS MK712 can be found at:
- *      http://www.icst.com/pdf/mk712.pdf
+ *      http://www.idt.com/products/getDoc.cfm?docID=18713923
 */
 /*
diff --git a/drivers/isdn/i4l/isdn_audio.c b/drivers/isdn/i4l/isdn_audio.c
index 861bdf3421f2..d5013935ac62 100644
--- a/drivers/isdn/i4l/isdn_audio.c
+++ b/drivers/isdn/i4l/isdn_audio.c
@@ -439,7 +439,7 @@ isdn_audio_xlaw2adpcm(adpcm_state * s, int fmt, unsigned char *in,
 /*
 * Goertzel algorithm.
- * See http://ptolemy.eecs.berkeley.edu/~pino/Ptolemy/papers/96/dtmf_ict/
+ * See http://ptolemy.eecs.berkeley.edu/papers/96/dtmf_ict/ 
 * for more info.
 * Result is stored into an sk_buff and queued up for later
 * evaluation.
diff --git a/drivers/macintosh/therm_adt746x.c b/drivers/macintosh/therm_adt746x.c
index c42eeb43042d..f153fc20ad6e 100644
--- a/drivers/macintosh/therm_adt746x.c
+++ b/drivers/macintosh/therm_adt746x.c
@@ -3,9 +3,9 @@
 *
 * Copyright (C) 2003, 2004 Colin Leroy, Rasmus Rohde, Benjamin Herrenschmidt
 *
- * Documentation from
+ * Documentation from 115254175ADT7467_pra.pdf and 3686221171167ADT7460_b.pdf
- * http://www.analog.com/UploadedFiles/Data_Sheets/115254175ADT7467_pra.pdf
+ * http://www.onsemi.com/PowerSolutions/product.do?id=ADT7467
- * http://www.analog.com/UploadedFiles/Data_Sheets/3686221171167ADT7460_b.pdf
+ * http://www.onsemi.com/PowerSolutions/product.do?id=ADT7460
 *
 */
diff --git a/drivers/media/IR/keymaps/rc-manli.c b/drivers/media/IR/keymaps/rc-manli.c
index 1e9fbfa90a1e..0f590b3d01c0 100644
--- a/drivers/media/IR/keymaps/rc-manli.c
+++ b/drivers/media/IR/keymaps/rc-manli.c
@@ -13,7 +13,6 @@
 #include <media/rc-map.h>
 /* Michael Tokarev <mjt@tls.msk.ru>
-   http://www.corpit.ru/mjt/beholdTV/remote_control.jpg
   keytable is used by MANLI MTV00[0x0c] and BeholdTV 40[13] at
   least, and probably other cards too.
   The "ascii-art picture" below (in comments, first row
diff --git a/drivers/media/dvb/ttpci/av7110.c b/drivers/media/dvb/ttpci/av7110.c
index a6be529eec5c..f96c4a675c65 100644
--- a/drivers/media/dvb/ttpci/av7110.c
+++ b/drivers/media/dvb/ttpci/av7110.c
@@ -26,7 +26,7 @@
 * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
 *
 *
- * the project's page is at http://www.linuxtv.org/dvb/
+ * the project's page is at http://www.linuxtv.org/ 
 */
@@ -2290,12 +2290,7 @@ static int frontend_init(struct av7110 *av7110)
 /* Budgetpatch note:
 * Original hardware design by Roberto Deza:
 * There is a DVB_Wiki at
- * http://212.227.36.83/linuxtv/wiki/index.php/Main_Page
+ * http://www.linuxtv.org/
- * where is described this 'DVB TT Budget Patch', on Card Modding:
- * http://212.227.36.83/linuxtv/wiki/index.php/DVB_TT_Budget_Patch
- * On the short description there is also a link to a external file,
- * with more details:
- * http://perso.wanadoo.es/jesussolano/Ttf_tsc1.zip
 *
 * New software triggering design by Emard that works on
 * original Roberto Deza's hardware:
diff --git a/drivers/media/dvb/ttpci/av7110_av.c b/drivers/media/dvb/ttpci/av7110_av.c
index 13efba942dac..878da6a19fbc 100644
--- a/drivers/media/dvb/ttpci/av7110_av.c
+++ b/drivers/media/dvb/ttpci/av7110_av.c
@@ -25,7 +25,7 @@
 * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
 *
 *
- * the project's page is at http://www.linuxtv.org/dvb/
+ * the project's page is at http://www.linuxtv.org/ 
 */
 #include <linux/types.h>
diff --git a/drivers/media/dvb/ttpci/av7110_ca.c b/drivers/media/dvb/ttpci/av7110_ca.c
index 4eba35a018e3..7564c2618947 100644
--- a/drivers/media/dvb/ttpci/av7110_ca.c
+++ b/drivers/media/dvb/ttpci/av7110_ca.c
@@ -25,7 +25,7 @@
 * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
 *
 *
- * the project's page is at http://www.linuxtv.org/dvb/
+ * the project's page is at http://www.linuxtv.org/ 
 */
 #include <linux/kernel.h>
diff --git a/drivers/media/dvb/ttpci/av7110_hw.c b/drivers/media/dvb/ttpci/av7110_hw.c
index e162691b515d..f1cbfe526989 100644
--- a/drivers/media/dvb/ttpci/av7110_hw.c
+++ b/drivers/media/dvb/ttpci/av7110_hw.c
@@ -22,7 +22,7 @@
 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
 * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
 *
- * the project's page is at http://www.linuxtv.org/dvb/
+ * the project's page is at http://www.linuxtv.org/ 
 */
 /* for debugging ARM communication: */
diff --git a/drivers/media/dvb/ttpci/av7110_v4l.c b/drivers/media/dvb/ttpci/av7110_v4l.c
index 8986d967d2f4..ac20c5bbfa43 100644
--- a/drivers/media/dvb/ttpci/av7110_v4l.c
+++ b/drivers/media/dvb/ttpci/av7110_v4l.c
@@ -22,7 +22,7 @@
 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
 * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
 *
- * the project's page is at http://www.linuxtv.org/dvb/
+ * the project's page is at http://www.linuxtv.org/ 
 */
 #include <linux/kernel.h>
diff --git a/drivers/media/dvb/ttpci/budget-av.c b/drivers/media/dvb/ttpci/budget-av.c
index 983672aa2450..97afc01f60d0 100644
--- a/drivers/media/dvb/ttpci/budget-av.c
+++ b/drivers/media/dvb/ttpci/budget-av.c
@@ -30,7 +30,7 @@
 * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
 *
 *
- * the project's page is at http://www.linuxtv.org/dvb/
+ * the project's page is at http://www.linuxtv.org/ 
 */
 #include "budget.h"
diff --git a/drivers/media/dvb/ttpci/budget-ci.c b/drivers/media/dvb/ttpci/budget-ci.c
index 13ac9e3ab121..a9c2c326df4b 100644
--- a/drivers/media/dvb/ttpci/budget-ci.c
+++ b/drivers/media/dvb/ttpci/budget-ci.c
@@ -26,7 +26,7 @@
 * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
 *
 *
- * the project's page is at http://www.linuxtv.org/dvb/
+ * the project's page is at http://www.linuxtv.org/ 
 */
 #include <linux/module.h>
diff --git a/drivers/media/dvb/ttpci/budget-core.c b/drivers/media/dvb/ttpci/budget-core.c
index ba18e56d5f11..054661315311 100644
--- a/drivers/media/dvb/ttpci/budget-core.c
+++ b/drivers/media/dvb/ttpci/budget-core.c
@@ -31,7 +31,7 @@
 * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
 *
 *
- * the project's page is at http://www.linuxtv.org/dvb/
+ * the project's page is at http://www.linuxtv.org/ 
 */
diff --git a/drivers/media/dvb/ttpci/budget-patch.c b/drivers/media/dvb/ttpci/budget-patch.c
index 9c92f9ddd223..579835590690 100644
--- a/drivers/media/dvb/ttpci/budget-patch.c
+++ b/drivers/media/dvb/ttpci/budget-patch.c
@@ -27,7 +27,7 @@
 * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
 *
 *
- * the project's page is at http://www.linuxtv.org/dvb/
+ * the project's page is at http://www.linuxtv.org/ 
 */
 #include "av7110.h"
diff --git a/drivers/media/dvb/ttpci/budget.c b/drivers/media/dvb/ttpci/budget.c
index 874a10a9d493..d238fb9371a7 100644
--- a/drivers/media/dvb/ttpci/budget.c
+++ b/drivers/media/dvb/ttpci/budget.c
@@ -31,7 +31,7 @@
 * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
 *
 *
- * the project's page is at http://www.linuxtv.org/dvb/
+ * the project's page is at http://www.linuxtv.org/ 
 */
 #include "budget.h"
diff --git a/drivers/media/radio/radio-maxiradio.c b/drivers/media/radio/radio-maxiradio.c
index 4349213b403b..255d40df4b46 100644
--- a/drivers/media/radio/radio-maxiradio.c
+++ b/drivers/media/radio/radio-maxiradio.c
@@ -13,7 +13,7 @@
 * anybody does please mail me.
 *
 * For the pdf file see:
- * http://www.semiconductors.philips.com/pip/TEA5757H/V1
+ * http://www.nxp.com/acrobat_download2/expired_datasheets/TEA5757_5759_3.pdf 
 *
 *
 * CHANGES:
diff --git a/drivers/media/radio/radio-typhoon.c b/drivers/media/radio/radio-typhoon.c
index 03439282dfce..b1f630527dc1 100644
--- a/drivers/media/radio/radio-typhoon.c
+++ b/drivers/media/radio/radio-typhoon.c
@@ -1,9 +1,6 @@
 /* Typhoon Radio Card driver for radio support
 * (c) 1999 Dr. Henrik Seidel <Henrik.Seidel@gmx.de>
 *
- * Card manufacturer:
- * http://194.18.155.92/idc/prod2.idc?nr=50753&lang=e
- *
 * Notes on the hardware
 *
 * This card has two output sockets, one for speakers and one for line.
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index f6e4d0475351..d000522cb0f4 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -978,7 +978,7 @@ config USB_STKWEBCAM
          Supported devices are typically found in some Asus laptops,
          with USB id 174f:a311 and 05e1:0501. Other Syntek cameras
          may be supported by the stk11xx driver, from which this is
-          derived, see http://stk11xx.sourceforge.net
+          derived, see <http://sourceforge.net/projects/syntekdriver/> 
          To compile this driver as a module, choose M here: the
          module will be called stkwebcam.
diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c
index be35e6965829..9536f1a40dd2 100644
--- a/drivers/media/video/cafe_ccic.c
+++ b/drivers/media/video/cafe_ccic.c
@@ -4,7 +4,7 @@
 * sensor.
 *
 * The data sheet for this device can be found at:
- *    http://www.marvell.com/products/pcconn/88ALP01.jsp
+ *    http://www.marvell.com/products/pc_connectivity/88alp01/ 
 *
 * Copyright 2006 One Laptop Per Child Association, Inc.
 * Copyright 2006-7 Jonathan Corbet <corbet@lwn.net>
diff --git a/drivers/media/video/cx18/cx18-cards.c b/drivers/media/video/cx18/cx18-cards.c
index 6b805afe5d20..fe1090940b01 100644
--- a/drivers/media/video/cx18/cx18-cards.c
+++ b/drivers/media/video/cx18/cx18-cards.c
@@ -39,7 +39,7 @@ static struct cx18_card_tuner_i2c cx18_i2c_std = {
        .tv    = { 0x61, 0x60, I2C_CLIENT_END },
 };
-/* Please add new PCI IDs to: http://pci-ids.ucw.cz/iii
+/* Please add new PCI IDs to: http://pci-ids.ucw.cz/ 
   This keeps the PCI ID database up to date. Note that the entries
   must be added under vendor 0x4444 (Conexant) as subsystem IDs.
   New vendor IDs should still be added to the vendor ID list. */
diff --git a/drivers/media/video/cx23885/cx23885-417.c b/drivers/media/video/cx23885/cx23885-417.c
index abd64e89f60f..53a67824071b 100644
--- a/drivers/media/video/cx23885/cx23885-417.c
+++ b/drivers/media/video/cx23885/cx23885-417.c
@@ -7,7 +7,7 @@
 *    (c) 2008 Steven Toth <stoth@linuxtv.org>
 *      - CX23885/7/8 support
 *
- *  Includes parts from the ivtv driver( http://ivtv.sourceforge.net/),
+ *  Includes parts from the ivtv driver <http://sourceforge.net/projects/ivtv/>
 *
 *  This program is free software; you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx88/cx88-blackbird.c b/drivers/media/video/cx88/cx88-blackbird.c
index e46e1ceef72c..660b2a927feb 100644
--- a/drivers/media/video/cx88/cx88-blackbird.c
+++ b/drivers/media/video/cx88/cx88-blackbird.c
@@ -9,7 +9,7 @@
 *    (c) 2005-2006 Mauro Carvalho Chehab <mchehab@infradead.org>
 *        - video_ioctl2 conversion
 *
- *  Includes parts from the ivtv driver( http://ivtv.sourceforge.net/),
+ *  Includes parts from the ivtv driver <http://sourceforge.net/projects/ivtv/>
 *
 *  This program is free software; you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/ivtv/ivtv-cards.c b/drivers/media/video/ivtv/ivtv-cards.c
index ca1fd3227a93..87afbbee2063 100644
--- a/drivers/media/video/ivtv/ivtv-cards.c
+++ b/drivers/media/video/ivtv/ivtv-cards.c
@@ -65,7 +65,7 @@ static struct ivtv_card_tuner_i2c ivtv_i2c_tda8290 = {
 /********************** card configuration *******************************/
-/* Please add new PCI IDs to: http://pci-ids.ucw.cz/iii
+/* Please add new PCI IDs to: http://pci-ids.ucw.cz/ 
   This keeps the PCI ID database up to date. Note that the entries
   must be added under vendor 0x4444 (Conexant) as subsystem IDs.
   New vendor IDs should still be added to the vendor ID list. */
diff --git a/drivers/media/video/mxb.c b/drivers/media/video/mxb.c
index ef0c8178f255..b1dbcf1d2bcb 100644
--- a/drivers/media/video/mxb.c
+++ b/drivers/media/video/mxb.c
@@ -3,7 +3,7 @@
    Copyright (C) 1998-2006 Michael Hunold <michael@mihu.de>
-    Visit http://www.mihu.de/linux/saa7146/mxb/
+    Visit http://www.themm.net/~mihu/linux/saa7146/mxb.html 
    for further details about this card.
    This program is free software; you can redistribute it and/or modify
diff --git a/drivers/media/video/sn9c102/sn9c102_pas202bcb.c b/drivers/media/video/sn9c102/sn9c102_pas202bcb.c
index 2782f94cf6f8..2e86fdc86989 100644
--- a/drivers/media/video/sn9c102/sn9c102_pas202bcb.c
+++ b/drivers/media/video/sn9c102/sn9c102_pas202bcb.c
@@ -4,7 +4,6 @@
 *                                                                         *
 * Copyright (C) 2004 by Carlos Eduardo Medaglia Dyonisio                  *
 *                       <medaglia@undl.org.br>                            *
- *                       http://cadu.homelinux.com:8080/                   *
 *                                                                         *
 * Support for SN9C103, DAC Magnitude, exposure and green gain controls    *
 * added by Luca Risolia <luca.risolia@studio.unibo.it>                    *
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 9df5b759a00b..0c31927c1562 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -112,8 +112,8 @@ config IBM_ASM
          WARNING: This software may not be supported or function
          correctly on your IBM server. Please consult the IBM ServerProven
-          website <http://www.pc.ibm.com/ww/eserver/xseries/serverproven> for
+          website <http://www-03.ibm.com/systems/info/x86servers/serverproven/compat/us/>
-          information on the specific driver level and support statement
+          for information on the specific driver level and support statement
          for your IBM server.
 config PHANTOM
diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
index 3e6c47bdce53..ba29d2f0ffd7 100644
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -418,8 +418,8 @@ struct mtd_info *cfi_cmdset_0002(struct map_info *map, int primary)
                        /*
                         * Valid primary extension versions are: 1.0, 1.1, 1.2, 1.3, 1.4
-                         * see: http://www.amd.com/us-en/assets/content_type/DownloadableAssets/cfi_r20.pdf, page 19
+                         * see: http://cs.ozerki.net/zap/pub/axim-x5/docs/cfi_r20.pdf, page 19 
-                         *      http://www.amd.com/us-en/assets/content_type/DownloadableAssets/cfi_100_20011201.pdf
+                         *      http://www.spansion.com/Support/AppNotes/cfi_100_20011201.pdf
                         *      http://www.spansion.com/Support/Datasheets/s29ws-p_00_a12_e.pdf
                         */
                        if (extp->MajorVersion != '1' ||
diff --git a/drivers/mtd/devices/lart.c b/drivers/mtd/devices/lart.c
index f4359fe7150f..caf604167f03 100644
--- a/drivers/mtd/devices/lart.c
+++ b/drivers/mtd/devices/lart.c
@@ -17,7 +17,7 @@
 *           - January 2000
 *
 *    [2] MTD internal API documentation
- *           - http://www.linux-mtd.infradead.org/tech/
+ *           - http://www.linux-mtd.infradead.org/ 
 *
 * Limitations:
 *
diff --git a/drivers/mtd/ftl.c b/drivers/mtd/ftl.c
index 4d6a64c387ec..037b399df3f1 100644
--- a/drivers/mtd/ftl.c
+++ b/drivers/mtd/ftl.c
@@ -51,7 +51,7 @@
    Use of the FTL format for non-PCMCIA applications may be an
    infringement of these patents.  For additional information,
-    contact M-Systems (http://www.m-sys.com) directly.
+    contact M-Systems directly. M-Systems since acquired by Sandisk. 
 ======================================================================*/
 #include <linux/mtd/blktrans.h>
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 701d942c6795..962212628f6e 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -172,7 +172,7 @@ config MTD_OCTAGON
          This provides a 'mapping' driver which supports the way in which
          the flash chips are connected in the Octagon-5066 Single Board
          Computer. More information on the board is available at
-          <http://www.octagonsystems.com/CPUpages/5066.html>.
+          <http://www.octagonsystems.com/products/5066.aspx>.
 config MTD_VMAX
        tristate "JEDEC Flash device mapped on Tempustech VMAX SBC301"
@@ -284,7 +284,7 @@ config MTD_TQM8XXL
          chips, currently uses AMD one. This 'mapping' driver supports
          that arrangement, allowing the CFI probe and command set driver
          code to communicate with the chips on the TQM8xxL board. More at
-          <http://www.denx.de/embedded-ppc-en.html>.
+          <http://www.denx.de/wiki/PPCEmbedded/>.
 config MTD_RPXLITE
        tristate "CFI Flash device mapped on RPX Lite or CLLF"
diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c
index db1dfc5a1b11..e06c8983978e 100644
--- a/drivers/mtd/nand/cafe_nand.c
+++ b/drivers/mtd/nand/cafe_nand.c
@@ -2,7 +2,7 @@
 * Driver for One Laptop Per Child ‘CAFÉ’ controller, aka Marvell 88ALP01
 *
 * The data sheet for this device can be found at:
- *    http://www.marvell.com/products/pcconn/88ALP01.jsp
+ *    http://wiki.laptop.org/go/Datasheets 
 *
 * Copyright © 2006 Red Hat, Inc.
 * Copyright © 2006 David Woodhouse <dwmw2@infradead.org>
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 5a6895320b48..2a34e214a7f9 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -921,7 +921,7 @@ config SMC91X
          including the SMC91C94 and the SMC91C111. Say Y if you want it
          compiled into the kernel, and read the file
          <file:Documentation/networking/smc9.txt>  and the Ethernet-HOWTO,
-          available from  <http://www.linuxdoc.org/docs.html#howto>.
+          available from  <http://www.tldp.org/docs.html#howto>.
          This driver is also available as a module ( = code which can be
          inserted in and removed from the running kernel whenever you want).
@@ -1021,7 +1021,7 @@ config SMC911X
          including the new LAN9115, LAN9116, LAN9117, and LAN9118.
          Say Y if you want it compiled into the kernel, 
          and read the Ethernet-HOWTO, available from
-          <http://www.linuxdoc.org/docs.html#howto>.
+          <http://www.tldp.org/docs.html#howto>.
          This driver is also available as a module. The module will be 
          called smc911x.  If you want to compile it as a module, say M 
@@ -1503,7 +1503,7 @@ config E100
          For the latest Intel PRO/100 network driver for Linux, see:
-          <http://appsr.intel.com/scripts-df/support_intel.asp>
+          <http://www.intel.com/p/en_US/support/highlights/network/pro100plus>
          More specific information on configuring the driver is in 
          <file:Documentation/networking/e100.txt>.
@@ -1529,9 +1529,8 @@ config FEALNX
        select CRC32
        select MII
        help
-          Say Y here to support the Mysom MTD-800 family of PCI-based Ethernet
+          Say Y here to support the Myson MTD-800 family of PCI-based Ethernet 
-          cards. Specifications and data at
+          cards. <http://www.myson.com.tw/>
-          <http://www.myson.com.hk/mtd/datasheet/>.
 config NATSEMI
        tristate "National Semiconductor DP8381x series PCI Ethernet support"
@@ -1705,7 +1704,7 @@ config SMSC9420
          This is a driver for SMSC's LAN9420 PCI ethernet adapter.
          Say Y if you want it compiled into the kernel,
          and read the Ethernet-HOWTO, available from
-          <http://www.linuxdoc.org/docs.html#howto>.
+          <http://www.tldp.org/docs.html#howto>.
          This driver is also available as a module. The module will be
          called smsc9420.  If you want to compile it as a module, say M
@@ -2540,7 +2539,7 @@ config CHELSIO_T1
          our website at <http://www.chelsio.com>.
          For customer support, please visit our customer support page at
-          <http://www.chelsio.com/support.htm>.
+          <http://www.chelsio.com/support.html>.
          Please send feedback to <linux-bugs@chelsio.com>.
@@ -2572,7 +2571,7 @@ config CHELSIO_T3
          our website at <http://www.chelsio.com>.
          For customer support, please visit our customer support page at
-          <http://www.chelsio.com/support.htm>.
+          <http://www.chelsio.com/support.html>.
          Please send feedback to <linux-bugs@chelsio.com>.
@@ -2597,7 +2596,7 @@ config CHELSIO_T4
          our website at <http://www.chelsio.com>.
          For customer support, please visit our customer support page at
-          <http://www.chelsio.com/support.htm>.
+          <http://www.chelsio.com/support.html>.
          Please send feedback to <linux-bugs@chelsio.com>.
@@ -2620,7 +2619,7 @@ config CHELSIO_T4VF
          our website at <http://www.chelsio.com>.
          For customer support, please visit our customer support page at
-          <http://www.chelsio.com/support.htm>.
+          <http://www.chelsio.com/support.html>.
          Please send feedback to <linux-bugs@chelsio.com>.
diff --git a/drivers/net/appletalk/Kconfig b/drivers/net/appletalk/Kconfig
index 0a0e0cd81a23..f5a89164e779 100644
--- a/drivers/net/appletalk/Kconfig
+++ b/drivers/net/appletalk/Kconfig
@@ -18,7 +18,7 @@ config ATALK
          General information about how to connect Linux, Windows machines and
          Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>.  The
-          NET-3-HOWTO, available from
+          NET3-4-HOWTO, available from
          <http://www.tldp.org/docs.html#howto>, contains valuable
          information as well.
diff --git a/drivers/net/atp.c b/drivers/net/atp.c
index bd2f9d331dac..0eee04426697 100644
--- a/drivers/net/atp.c
+++ b/drivers/net/atp.c
@@ -68,7 +68,7 @@ static int xcvr[NUM_UNITS]; 			/* The data transfer mode. */
        In 1997 Realtek made available the documentation for the second generation
        RTL8012 chip, which has lead to several driver improvements.
-          http://www.realtek.com.tw/cn/cn.html
+          http://www.realtek.com.tw/
                                        Theory of Operation
diff --git a/drivers/net/epic100.c b/drivers/net/epic100.c
index 57c8ac0ef3f1..c6e25716b2c2 100644
--- a/drivers/net/epic100.c
+++ b/drivers/net/epic100.c
@@ -131,8 +131,8 @@ IIIa. Ring buffers
 IVb. References
-http://www.smsc.com/main/tools/discontinued/83c171.pdf
+http://www.smsc.com/media/Downloads_Public/discontinued/83c171.pdf
-http://www.smsc.com/main/tools/discontinued/83c175.pdf
+http://www.smsc.com/media/Downloads_Public/discontinued/83c175.pdf
 http://scyld.com/expert/NWay.html
 http://www.national.com/pf/DP/DP83840A.html
diff --git a/drivers/net/hamradio/Kconfig b/drivers/net/hamradio/Kconfig
index 62d5d5cfd6a6..95dbcfdf131d 100644
--- a/drivers/net/hamradio/Kconfig
+++ b/drivers/net/hamradio/Kconfig
@@ -73,7 +73,7 @@ config DMASCC
          certain parameters, such as channel access timing, clock mode, and
          DMA channel. This is accomplished with a small utility program,
          dmascc_cfg, available at
-          <http://cacofonix.nt.tuwien.ac.at/~oe1kib/Linux/>. Please be sure to
+          <http://www.linux-ax25.org/wiki/Ax25-tools>. Please be sure to
          get at least version 1.27 of dmascc_cfg, as older versions will not
          work with the current driver.
diff --git a/drivers/net/ibmlana.c b/drivers/net/ibmlana.c
index 294ccfb427cf..8de327321c41 100644
--- a/drivers/net/ibmlana.c
+++ b/drivers/net/ibmlana.c
@@ -23,7 +23,7 @@ paper sources:
  'LAN Technical Reference Ethernet Adapter Interface Version 1 Release 1.0
   Document Number SC30-3661-00' by IBM for info on the adapter itself
-  Also see http://www.natsemi.com/
+  Also see http://www.national.com/analog 
 special acknowledgements to:
  - Bob Eager for helping me out with documentation from IBM
diff --git a/drivers/net/irda/donauboe.h b/drivers/net/irda/donauboe.h
index 36c3060411d2..4dc39e5f0156 100644
--- a/drivers/net/irda/donauboe.h
+++ b/drivers/net/irda/donauboe.h
@@ -54,7 +54,7 @@
 /* anyone who has. HOWEVER the chip bears a striking resemblence */
 /* to the IrDA controller in the Toshiba RISC TMPR3922 chip      */
 /* the documentation for this is freely available at             */
-/* http://www.toshiba.com/taec/components/Generic/TMPR3922.shtml */
+/* http://www.madingley.org/james/resources/toshoboe/TMPR3922.pdf */
 /* The mapping between the registers in that document and the    */
 /* Registers in the 701 oboe chip are as follows    */
diff --git a/drivers/net/pci-skeleton.c b/drivers/net/pci-skeleton.c
index 56f3fc45dbaa..627b619742e3 100644
--- a/drivers/net/pci-skeleton.c
+++ b/drivers/net/pci-skeleton.c
@@ -78,7 +78,7 @@ that almost all frames will need to be copied to an alignment buffer.
 IVb. References
-http://www.realtek.com.tw/cn/cn.html
+http://www.realtek.com.tw/
 http://www.scyld.com/expert/NWay.html
 IVc. Errata
diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c
index c683f77c6f42..e09267965aad 100644
--- a/drivers/net/pcmcia/3c574_cs.c
+++ b/drivers/net/pcmcia/3c574_cs.c
@@ -62,7 +62,7 @@ invalid ramWidth is Very Bad.
 V. References
 http://www.scyld.com/expert/NWay.html
-http://www.national.com/pf/DP/DP83840.html
+http://www.national.com/opf/DP/DP83840A.html
 Thanks to Terry Murphy of 3Com for providing development information for
 earlier 3Com products.
diff --git a/drivers/net/sc92031.c b/drivers/net/sc92031.c
index 8c4067af32b0..12fb5607176c 100644
--- a/drivers/net/sc92031.c
+++ b/drivers/net/sc92031.c
@@ -15,7 +15,7 @@
 *  Rewritten for 2.6 by Cesar Eduardo Barros
 *
 *  A datasheet for this chip can be found at
- *  http://www.silan.com.cn/english/products/pdf/SC92031AY.pdf
+ *  http://www.silan.com.cn/english/product/pdf/SC92031AY.pdf 
 */
 /* Note about set_mac_address: I don't know how to change the hardware
diff --git a/drivers/net/tlan.c b/drivers/net/tlan.c
index ccee3eddc5f4..ef000b20d8af 100644
--- a/drivers/net/tlan.c
+++ b/drivers/net/tlan.c
@@ -78,7 +78,7 @@
 *                           - Updated tlan.txt accordingly.
 *                           - Adjusted minimum/maximum frame length.
 *                           - There is now a TLAN website up at
- *                             http://tlan.kernel.dk
+ *                             http://hp.sourceforge.net/ 
 *
 *      v1.7 April 07, 2000  - Started to implement custom ioctls. Driver now
 *                             reports PHY information when used with Donald
diff --git a/drivers/net/tokenring/tms380tr.c b/drivers/net/tokenring/tms380tr.c
index 435ef7d5470f..ccc16d6f5266 100644
--- a/drivers/net/tokenring/tms380tr.c
+++ b/drivers/net/tokenring/tms380tr.c
@@ -5,7 +5,7 @@
 *  Originally sktr.c: Written 1997 by Christoph Goos
 *
 *  A fine result of the Linux Systems Network Architecture Project.
- *  http://www.linux-sna.org
+ *  http://www.vanheusden.com/sna/ 
 *
 *  This software may be used and distributed according to the terms
 *  of the GNU General Public License, incorporated herein by reference.
diff --git a/drivers/net/tulip/Kconfig b/drivers/net/tulip/Kconfig
index 516713fa0a05..14c02e12139f 100644
--- a/drivers/net/tulip/Kconfig
+++ b/drivers/net/tulip/Kconfig
@@ -151,7 +151,7 @@ config ULI526X
        select CRC32
        ---help---
          This driver is for ULi M5261/M5263 10/100M Ethernet Controller
-          (<http://www.uli.com.tw/>).
+          (<http://www.nvidia.com/page/uli_drivers.html>).
          To compile this driver as a module, choose M here. The module will
          be called uli526x.
diff --git a/drivers/net/usb/plusb.c b/drivers/net/usb/plusb.c
index 08555f8b15f4..08ad269f6b4e 100644
--- a/drivers/net/usb/plusb.c
+++ b/drivers/net/usb/plusb.c
@@ -32,7 +32,7 @@
 /*
- * Prolific PL-2301/PL-2302 driver ... http://www.prolifictech.com
+ * Prolific PL-2301/PL-2302 driver ... http://www.prolific.com.tw/ 
 *
 * The protocol and handshaking used here should be bug-compatible
 * with the Linux 2.2 "plusb" driver, by Deti Fliegl.
diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
index d08ce6a264cb..423eb26386c8 100644
--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
@@ -409,7 +409,7 @@ config CYCLADES_SYNC
        tristate "Cyclom 2X(tm) cards (EXPERIMENTAL)"
        depends on WAN_ROUTER_DRIVERS && (PCI || ISA)
        ---help---
-          Cyclom 2X from Cyclades Corporation <http://www.cyclades.com/> is an
+          Cyclom 2X from Cyclades Corporation <http://www.avocent.com/> is an
          intelligent multiprotocol WAN adapter with data transfer rates up to
          512 Kbps. These cards support the X.25 and SNA related protocols.
diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h
index ea6362a8988d..97659a077af8 100644
--- a/drivers/net/wireless/ath/ath5k/ath5k.h
+++ b/drivers/net/wireless/ath/ath5k/ath5k.h
@@ -351,7 +351,7 @@ struct ath5k_srev_name {
 /*
 * Some of this information is based on Documentation from:
 *
- * http://madwifi.org/wiki/ChipsetFeatures/SuperAG
+ * http://madwifi-project.org/wiki/ChipsetFeatures/SuperAG 
 *
 * Modulation for Atheros' eXtended Range - range enhancing extension that is
 * supposed to double the distance an Atheros client device can keep a
diff --git a/drivers/net/wireless/ath/ath5k/reg.h b/drivers/net/wireless/ath/ath5k/reg.h
index 55b4ac6d236f..69a9b34ed456 100644
--- a/drivers/net/wireless/ath/ath5k/reg.h
+++ b/drivers/net/wireless/ath/ath5k/reg.h
@@ -26,7 +26,6 @@
 * Atheros presentations and papers like these:
 *
 * 5210 - http://nova.stanford.edu/~bbaas/ps/isscc2002_slides.pdf
- *        http://www.it.iitb.ac.in/~janak/wifire/01222734.pdf
 *
 * 5211 - http://www.hotchips.org/archives/hc14/3_Tue/16_mcfarland.pdf
 *
diff --git a/drivers/net/wireless/p54/Kconfig b/drivers/net/wireless/p54/Kconfig
index b0342a520bf1..8e823796cb94 100644
--- a/drivers/net/wireless/p54/Kconfig
+++ b/drivers/net/wireless/p54/Kconfig
@@ -8,7 +8,7 @@ config P54_COMMON
          also need to be enabled in order to support any devices.
          These devices require softmac firmware which can be found at
-          http://prism54.org/
+          <http://wireless.kernel.org/en/users/Drivers/p54>
          If you choose to build a module, it'll be called p54common.
@@ -20,7 +20,7 @@ config P54_USB
          This driver is for USB isl38xx based wireless cards.
          These devices require softmac firmware which can be found at
-          http://prism54.org/
+          <http://wireless.kernel.org/en/users/Drivers/p54>
          If you choose to build a module, it'll be called p54usb.
@@ -34,7 +34,7 @@ config P54_PCI
          supported by the fullmac driver/firmware.
          This driver requires softmac firmware which can be found at
-          http://prism54.org/
+          <http://wireless.kernel.org/en/users/Drivers/p54>
          If you choose to build a module, it'll be called p54pci.
diff --git a/drivers/net/wireless/prism54/islpci_hotplug.c b/drivers/net/wireless/prism54/islpci_hotplug.c
index dc14420a9adc..b5e64d71b7a6 100644
--- a/drivers/net/wireless/prism54/islpci_hotplug.c
+++ b/drivers/net/wireless/prism54/islpci_hotplug.c
@@ -38,7 +38,7 @@ module_param(init_pcitm, int, 0);
 /* In this order: vendor, device, subvendor, subdevice, class, class_mask,
 * driver_data
 * If you have an update for this please contact prism54-devel@prism54.org
- * The latest list can be found at http://prism54.org/supported_cards.php */
+ * The latest list can be found at http://wireless.kernel.org/en/users/Drivers/p54 */
 static DEFINE_PCI_DEVICE_TABLE(prism54_id_tbl) = {
        /* Intersil PRISM Duette/Prism GT Wireless LAN adapter */
        {
diff --git a/drivers/parisc/README.dino b/drivers/parisc/README.dino
index 097324f34bbe..1627426996c1 100644
--- a/drivers/parisc/README.dino
+++ b/drivers/parisc/README.dino
@@ -10,8 +10,7 @@
 ** PCI bus. HP-supplied graphics cards that utilize the PCI bus are
 ** not affected."
 **
-** REVISIT: "go/pci_defect" link below is stale.
+** http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?locale=en_US&prodTypeId=12454&prodSeriesId=44443
-**      HP Internal can use <http://hpfcdma.fc.hp.com:80/Dino/>
 **
 **      Product         First Good Serial Number
 **  C200/C240 (US)      US67350000
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 89ed181cd90c..dcc333f2cb6a 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -206,6 +206,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 	PCI_DEVICE_ID_INTEL_82439TX, 	quir
 *      VIA Apollo KT133 needs PCI latency patch
 *      Made according to a windows driver based patch by George E. Breese
 *      see PCI Latency Adjust on http://www.viahardware.com/download/viatweak.shtm
+ *      and http://www.georgebreese.com/net/software/#PCI
 *      Also see http://www.au-ja.org/review-kt133a-1-en.phtml for
 *      the info on which Mr Breese based his work.
 *
@@ -996,7 +997,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TOSHIBA,	0x605,	quirk_transparent_bridge)
 /*
 * Common misconfiguration of the MediaGX/Geode PCI master that will
 * reduce PCI bandwidth from 70MB/s to 25MB/s.  See the GXM/GXLV/GX1
- * datasheets found at http://www.national.com/ds/GX for info on what
+ * datasheets found at http://www.national.com/analog for info on what
 * these bits do.  <christer@weinigel.se>
 */
 static void quirk_mediagx_master(struct pci_dev *dev)
diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c
index 414d9a6f9a32..91a722518289 100644
--- a/drivers/pcmcia/yenta_socket.c
+++ b/drivers/pcmcia/yenta_socket.c
@@ -1073,7 +1073,7 @@ static void yenta_config_init(struct yenta_socket *socket)
 * invisible during PCI scans because of a misconfigured subordinate number
 * of the parent brige - some BIOSes seem to be too lazy to set it right.
 * Does the fixup carefully by checking how far it can go without conflicts.
- * See http\://bugzilla.kernel.org/show_bug.cgi?id=2944 for more information.
+ * See http://bugzilla.kernel.org/show_bug.cgi?id=2944 for more information.
 */
 static void yenta_fixup_parent_bridge(struct pci_bus *cardbus_bridge)
 {
diff --git a/drivers/pnp/pnpbios/proc.c b/drivers/pnp/pnpbios/proc.c
index 2d8ac43f78e8..bc89f392a629 100644
--- a/drivers/pnp/pnpbios/proc.c
+++ b/drivers/pnp/pnpbios/proc.c
@@ -11,7 +11,6 @@
 *
 * The .../escd file is utilized by the lsescd utility written by
 * Gunther Mayer.
- *     http://home.t-online.de/home/gunther.mayer/lsescd
 *
 * The .../legacy_device_resources file is not used yet.
 *
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 158284f05732..85da296a49be 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -116,7 +116,7 @@ config CHR_DEV_OSST
          <http://www.tldp.org/docs.html#howto>  and
          <file:Documentation/scsi/osst.txt>  in the kernel source.
          More info on the OnStream driver may be found on
-          <http://linux1.onstream.nl/test/>
+          <http://sourceforge.net/projects/osst/>
          Please also have a look at the standard st docu, as most of it
          applies to osst as well.
@@ -156,9 +156,9 @@ config CHR_DEV_SG
          directly, so you need some additional software which knows how to
          talk to these devices using the SCSI protocol:
-          For scanners, look at SANE (<http://www.mostang.com/sane/>). For CD
+          For scanners, look at SANE (<http://www.sane-project.org/>). For CD
          writer software look at Cdrtools
-          (<http://www.fokus.gmd.de/research/cc/glone/employees/joerg.schilling/private/cdrecord.html>)
+          (<http://cdrecord.berlios.de/private/cdrecord.html>)
          and for burning a "disk at once": CDRDAO
          (<http://cdrdao.sourceforge.net/>). Cdparanoia is a high
          quality digital reader of audio CDs (<http://www.xiph.org/paranoia/>).
@@ -942,6 +942,7 @@ config SCSI_IPS
        ---help---
          This is support for the IBM ServeRAID hardware RAID controllers.
          See <http://www.developer.ibm.com/welcome/netfinity/serveraid.html>
+          and <http://www-947.ibm.com/support/entry/portal/docdisplay?brand=5000008&lndocid=SERV-RAID>
          for more information.  If this driver does not work correctly
          without modification please contact the author by email at
          <ipslinux@adaptec.com>.
@@ -1601,7 +1602,7 @@ config SCSI_DEBUG
          host adapter with one dummy SCSI disk. Each dummy disk uses kernel
          RAM as storage (i.e. it is a ramdisk). To save space when multiple
          dummy disks are simulated, they share the same kernel RAM for 
-          their storage. See <http://www.torque.net/sg/sdebug.html> for more
+          their storage. See <http://sg.danny.cz/sg/sdebug26.html> for more
          information. This driver is primarily of use to those testing the
          SCSI and block subsystems. If unsure, say N.
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 24110f6f61e0..131c95f5476a 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -924,7 +924,7 @@ static int broken_efr(struct uart_8250_port *up)
        /*
         * Exar ST16C2550 "A2" devices incorrectly detect as
         * having an EFR, and report an ID of 0x0201.  See
-         * http://www.exar.com/info.php?pdf=dan180_oct2004.pdf
+         * http://linux.derkeiler.com/Mailing-Lists/Kernel/2004-11/4812.html 
         */
        if (autoconfig_read_divisor_id(up) == 0x0201 && size_fifo(up) == 16)
                return 1;
diff --git a/drivers/serial/bfin_sport_uart.c b/drivers/serial/bfin_sport_uart.c
index e57fb3d228e2..81987a7b9aa3 100644
--- a/drivers/serial/bfin_sport_uart.c
+++ b/drivers/serial/bfin_sport_uart.c
@@ -10,7 +10,7 @@
 /*
 * This driver and the hardware supported are in term of EE-191 of ADI.
- * http://www.analog.com/UploadedFiles/Application_Notes/399447663EE191.pdf
+ * http://www.analog.com/static/imported-files/application_notes/EE191.pdf 
 * This application note describe how to implement a UART on a Sharc DSP,
 * but this driver is implemented on Blackfin Processor.
 * Transmit Frame Sync is not used by this driver to transfer data out.
diff --git a/drivers/serial/bfin_sport_uart.h b/drivers/serial/bfin_sport_uart.h
index 9ce253e381d2..6d06ce1d5675 100644
--- a/drivers/serial/bfin_sport_uart.h
+++ b/drivers/serial/bfin_sport_uart.h
@@ -10,7 +10,7 @@
 /*
 * This driver and the hardware supported are in term of EE-191 of ADI.
- * http://www.analog.com/UploadedFiles/Application_Notes/399447663EE191.pdf
+ * http://www.analog.com/static/imported-files/application_notes/EE191.pdf 
 * This application note describe how to implement a UART on a Sharc DSP,
 * but this driver is implemented on Blackfin Processor.
 * Transmit Frame Sync is not used by this driver to transfer data out.
diff --git a/drivers/serial/uartlite.c b/drivers/serial/uartlite.c
index caf085d3a76a..c761b2223129 100644
--- a/drivers/serial/uartlite.c
+++ b/drivers/serial/uartlite.c
@@ -44,7 +44,7 @@ MODULE_DEVICE_TABLE(of, ulite_of_match);
 * Register definitions
 *
 * For register details see datasheet:
- * http://www.xilinx.com/bvdocs/ipcenter/data_sheet/opb_uartlite.pdf
+ * http://www.xilinx.com/support/documentation/ip_documentation/opb_uartlite.pdf 
 */
 #define ULITE_RX                0x00
diff --git a/drivers/staging/asus_oled/README b/drivers/staging/asus_oled/README
index 96b9717f168f..0d82a6d5fa58 100644
--- a/drivers/staging/asus_oled/README
+++ b/drivers/staging/asus_oled/README
@@ -2,7 +2,7 @@
    Driver for Asus OLED display present in some Asus laptops.
    The code of this driver is based on 'asusoled' program taken from
-    https://launchpad.net/asusoled/. I just wanted to have a simple
+    <http://lapsus.berlios.de/asus_oled.html>. I just wanted to have a simple
    kernel driver for controlling this device, but I didn't know how
    to do that. Now I know ;) Also, that program can not be used
    with usbhid loaded, which means no USB mouse/keyboard while
diff --git a/drivers/staging/asus_oled/asus_oled.c b/drivers/staging/asus_oled/asus_oled.c
index 5b279fb30f3f..8c95d8c2a4f4 100644
--- a/drivers/staging/asus_oled/asus_oled.c
+++ b/drivers/staging/asus_oled/asus_oled.c
@@ -24,7 +24,7 @@
 *
 *
 *  Asus OLED support is based on asusoled program taken from
- *  https://launchpad.net/asusoled/.
+ *  <http://lapsus.berlios.de/asus_oled.html>.
 *
 *
 */
diff --git a/drivers/staging/comedi/drivers/cb_pcimdas.c b/drivers/staging/comedi/drivers/cb_pcimdas.c
index ced346a7cae3..78b1410ba4f6 100644
--- a/drivers/staging/comedi/drivers/cb_pcimdas.c
+++ b/drivers/staging/comedi/drivers/cb_pcimdas.c
@@ -37,7 +37,7 @@ Configuration Options:
 Developed from cb_pcidas and skel by Richard Bytheway (mocelet@sucs.org).
 Only supports DIO, AO and simple AI in it's present form.
 No interrupts, multi channel or FIFO AI, although the card looks like it could support this.
-See http://www.measurementcomputing.com/PDFManuals/pcim-das1602_16.pdf for more details.
+See http://www.mccdaq.com/PDFs/Manuals/pcim-das1602-16.pdf for more details.
 */
 #include "../comedidev.h"
diff --git a/drivers/staging/comedi/drivers/daqboard2000.c b/drivers/staging/comedi/drivers/daqboard2000.c
index 6af6c8323d56..82be77daa7d7 100644
--- a/drivers/staging/comedi/drivers/daqboard2000.c
+++ b/drivers/staging/comedi/drivers/daqboard2000.c
@@ -50,8 +50,8 @@ Configuration options:
   With some help from our swedish distributor, we got the Windows sourcecode
   for the card, and here are the findings so far.
-   1. A good document that describes the PCI interface chip is found at:
+   1. A good document that describes the PCI interface chip is 9080db-106.pdf
-      http://plx.plxtech.com/download/9080/databook/9080db-106.pdf
+      available from http://www.plxtech.com/products/io/pci9080 
   2. The initialization done so far is:
        a. program the FPGA (windows code sans a lot of error messages)
diff --git a/drivers/staging/comedi/drivers/ni_labpc.c b/drivers/staging/comedi/drivers/ni_labpc.c
index 3acf7e62bec4..1411dd8f4e7c 100644
--- a/drivers/staging/comedi/drivers/ni_labpc.c
+++ b/drivers/staging/comedi/drivers/ni_labpc.c
@@ -37,7 +37,7 @@ boards has not
 yet been added to the driver, mainly due to the fact that
 I don't know the device id numbers.  If you have one
 of these boards,
-please file a bug report at https://bugs.comedi.org/
+please file a bug report at http://comedi.org/ 
 so I can get the necessary information from you.
 The 1200 series boards have onboard calibration dacs for correcting
diff --git a/drivers/staging/comedi/drivers/ni_mio_common.c b/drivers/staging/comedi/drivers/ni_mio_common.c
index bd16f913af23..986ef6712989 100644
--- a/drivers/staging/comedi/drivers/ni_mio_common.c
+++ b/drivers/staging/comedi/drivers/ni_mio_common.c
@@ -34,7 +34,7 @@
           340747b.pdf  AT-MIO E series Register Level Programmer Manual
           341079b.pdf  PCI E Series RLPM
           340934b.pdf  DAQ-STC reference manual
-        67xx and 611x registers (from http://www.ni.com/pdf/daq/us)
+        67xx and 611x registers (from ftp://ftp.ni.com/support/daq/mhddk/documentation/)
        release_ni611x.pdf
        release_ni67xx.pdf
        Other possibly relevant info:
diff --git a/drivers/staging/comedi/drivers/plx9080.h b/drivers/staging/comedi/drivers/plx9080.h
index 485d63f99293..0d254a1b78a7 100644
--- a/drivers/staging/comedi/drivers/plx9080.h
+++ b/drivers/staging/comedi/drivers/plx9080.h
@@ -13,7 +13,7 @@
 *
 ********************************************************************
 *
- * Copyright (C) 1999 RG Studio s.c., http://www.rgstudio.com.pl/
+ * Copyright (C) 1999 RG Studio s.c.
 * Written by Krzysztof Halasa <khc@rgstudio.com.pl>
 *
 * Portions (C) SBE Inc., used by permission.
diff --git a/drivers/staging/comedi/drivers/rtd520.c b/drivers/staging/comedi/drivers/rtd520.c
index 0367d2b9e2fa..a49a7c566d37 100644
--- a/drivers/staging/comedi/drivers/rtd520.c
+++ b/drivers/staging/comedi/drivers/rtd520.c
@@ -59,7 +59,7 @@ Configuration options:
    Data sheet: http://www.rtdusa.com/pdf/dm7520.pdf
    Example source: http://www.rtdusa.com/examples/dm/dm7520.zip
    Call them and ask for the register level manual.
-    PCI chip: http://www.plxtech.com/products/toolbox/9080.htm
+    PCI chip: http://www.plxtech.com/products/io/pci9080 
    Notes:
    This board is memory mapped.  There is some IO stuff, but it isn't needed.
diff --git a/drivers/staging/quickstart/quickstart.c b/drivers/staging/quickstart/quickstart.c
index 66122479d529..ba8f670ec0a7 100644
--- a/drivers/staging/quickstart/quickstart.c
+++ b/drivers/staging/quickstart/quickstart.c
@@ -5,8 +5,7 @@
 *  Copyright (C) 2007-2010 Angelo Arrifano <miknix@gmail.com>
 *
 *  Information gathered from disassebled dsdt and from here:
- *  "http://download.microsoft.com/download/9/c/5/
+ *  <http://www.microsoft.com/whdc/system/platform/firmware/DirAppLaunch.mspx> 
- *  9c5b2167-8017-4bae-9fde-d599bac8184a/DirAppLaunch_Vista.doc"
 *
 *  This program is free software; you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/uio/Kconfig b/drivers/uio/Kconfig
index 1da73ecd9799..bb440792a1b7 100644
--- a/drivers/uio/Kconfig
+++ b/drivers/uio/Kconfig
@@ -17,9 +17,9 @@ config UIO_CIF
        depends on PCI
        help
          Driver for Hilscher CIF DeviceNet and Profibus cards.  This
-          driver requires a userspace component that handles all of the
+          driver requires a userspace component called cif that handles
-          heavy lifting and can be found at:
+          all of the heavy lifting and can be found at:
-                http://www.osadl.org/projects/downloads/UIO/user/cif-*
+                <http://www.osadl.org/projects/downloads/UIO/user/>
          To compile this driver as a module, choose M here: the module
          will be called uio_cif.
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index 916b2b6d765f..b71e309116a3 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -176,7 +176,7 @@ config USB_SERIAL_VISOR
        help
          Say Y here if you want to connect to your HandSpring Visor, Palm
          m500 or m505 through its USB docking station. See
-          <http://usbvisor.sourceforge.net/> for more information on using this
+          <http://usbvisor.sourceforge.net/index.php3> for more information on using this
          driver.
          To compile this driver as a module, choose M here: the
@@ -289,7 +289,7 @@ config USB_SERIAL_KEYSPAN
          and was developed with their support.  You must also include
          firmware to support your particular device(s).
-          See <http://misc.nu/hugh/keyspan.html> for more information.
+          See <http://blemings.org/hugh/keyspan.html> for more information.
          To compile this driver as a module, choose M here: the
          module will be called keyspan.
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 6e612c52e763..732ff2a2fa36 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -46,7 +46,7 @@
 #define FTDI_USINT_RS232_PID    0xb812  /* Navigator RS232 and CONFIG lines */
 /* OOCDlink by Joern Kaipf <joernk@web.de>
- * (http://www.joernonline.de/dw/doku.php?id=start&idx=projects:oocdlink) */
+ * (http://www.joernonline.de/) */
 #define FTDI_OOCDLINK_PID       0xbaf8  /* Amontec JTAGkey */
 /* Luminary Micro Stellaris Boards, VID = FTDI_VID */
@@ -320,7 +320,7 @@
 #define FTDI_PIEGROUP_PID       0xF208  /* Product Id */
 /* ACT Solutions HomePro ZWave interface
-   (http://www.act-solutions.com/HomePro.htm) */
+   (http://www.act-solutions.com/HomePro-Product-Matrix.html) */
 #define FTDI_ACTZWAVE_PID       0xF2D0
 /*
@@ -351,7 +351,7 @@
 #define FTDI_SUUNTO_SPORTS_PID  0xF680  /* Suunto Sports instrument */
 /* USB-UIRT - An infrared receiver and transmitter using the 8U232AM chip */
-/* http://home.earthlink.net/~jrhees/USBUIRT/index.htm */
+/* http://www.usbuirt.com/ */
 #define FTDI_USB_UIRT_PID       0xF850  /* Product Id */
 /* CCS Inc. ICDU/ICDU40 product ID -
@@ -380,7 +380,7 @@
 */
 #define FTDI_HE_TIRA1_PID       0xFA78  /* Tira-1 IR transceiver */
-/* Inside Accesso contactless reader (http://www.insidefr.com) */
+/* Inside Accesso contactless reader (http://www.insidecontactless.com/) */
 #define INSIDE_ACCESSO          0xFAD0
 /*
@@ -619,14 +619,14 @@
 /*
 * JETI SPECTROMETER SPECBOS 1201
- * http://www.jeti.com/products/sys/scb/scb1201.php
+ * http://www.jeti.com/cms/index.php/instruments/other-instruments/specbos-2101
 */
 #define JETI_VID                0x0c6c
 #define JETI_SPC1201_PID        0x04b2
 /*
 * FTDI USB UART chips used in construction projects from the
- * Elektor Electronics magazine (http://elektor-electronics.co.uk)
+ * Elektor Electronics magazine (http://www.elektor.com/)
 */
 #define ELEKTOR_VID             0x0C7D
 #define ELEKTOR_FT323R_PID      0x0005  /* RFID-Reader, issue 09-2006 */
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index 297163c3c610..0791778a66f3 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -9,7 +9,7 @@
  the Free Software Foundation; either version 2 of the License, or
  (at your option) any later version.
-  See http://misc.nu/hugh/keyspan.html for more information.
+  See http://blemings.org/hugh/keyspan.html for more information.
  Code in this driver inspired by and in a number of places taken
  from Brian Warner's original Keyspan-PDA driver.
diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h
index bf3297ddd186..2d8baf6ac472 100644
--- a/drivers/usb/serial/keyspan.h
+++ b/drivers/usb/serial/keyspan.h
@@ -9,7 +9,7 @@
  the Free Software Foundation; either version 2 of the License, or
  (at your option) any later version.
-  See http://misc.nu/hugh/keyspan.html for more information.
+  See http://blemings.org/hugh/keyspan.html for more information.
  
  Code in this driver inspired by and in a number of places taken
  from Brian Warner's original Keyspan-PDA driver.
diff --git a/drivers/usb/serial/mct_u232.h b/drivers/usb/serial/mct_u232.h
index 3a3f5e6b8f96..d325bb8cb583 100644
--- a/drivers/usb/serial/mct_u232.h
+++ b/drivers/usb/serial/mct_u232.h
@@ -10,10 +10,9 @@
 *
 * This driver is for the device MCT USB-RS232 Converter (25 pin, Model No.
 * U232-P25) from Magic Control Technology Corp. (there is also a 9 pin
- * Model No. U232-P9). See http://www.mct.com.tw/p_u232.html for further
+ * Model No. U232-P9). See http://www.mct.com.tw/products/product_us232.html 
- * information. The properties of this device are listed at the end of this
+ * for further information. The properties of this device are listed at the end 
- * file. This device is available from various distributors. I know Hana,
+ * of this file. This device was used in the Dlink DSB-S25.
- * http://www.hana.de and D-Link, http://www.dlink.com/products/usb/dsbs25.
 *
 * All of the information about the device was acquired by using SniffUSB
 * on Windows98. The technical details of the reverse engineering are
@@ -458,7 +457,7 @@ static int mct_u232_calculate_baud_rate(struct usb_serial *serial,
 * embedded UART.  Exhaustive documentation for these is available at:
 *
 *   http://www.semiconductors.philips.com/pip/p87c52ubaa
- *   http://www.semiconductors.philips.com/pip/pdiusbd12
+ *   http://www.nxp.com/acrobat_download/various/PDIUSBD12_PROGRAMMING_GUIDE.pdf
 *
 * Thanks to Julian Highfield for the pointer to the Philips database.
 *
diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig
index 8a372bac0e43..b356e1565db6 100644
--- a/drivers/usb/storage/Kconfig
+++ b/drivers/usb/storage/Kconfig
@@ -36,7 +36,7 @@ config USB_STORAGE_DATAFAB
        depends on USB_STORAGE
        help
          Support for certain Datafab CompactFlash readers.
-          Datafab has a web page at <http://www.datafabusa.com/>.
+          Datafab has a web page at <http://www.datafab.com/>.
          If this driver is compiled as a module, it will be named ums-datafab.
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index a9ca72f301bf..d4979f3f77fb 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -49,7 +49,7 @@ menuconfig FB
          You need an utility program called fbset to make full use of frame
          buffer devices. Please read <file:Documentation/fb/framebuffer.txt>
          and the Framebuffer-HOWTO at
-          <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.2.html> for more
+          <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.3.html> for more
          information.
          Say Y here and to the driver for your graphics board below if you
@@ -955,7 +955,7 @@ config FB_EPSON1355
          Build in support for the SED1355 Epson Research Embedded RAMDAC
          LCD/CRT Controller (since redesignated as the S1D13505) as a
          framebuffer.  Product specs at
-          <http://www.erd.epson.com/vdc/html/products.htm>.
+          <http://vdc.epson.com/>.
 config FB_S1D13XXX
        tristate "Epson S1D13XXX framebuffer support"
@@ -966,7 +966,7 @@ config FB_S1D13XXX
        help
          Support for S1D13XXX framebuffer device family (currently only
          working with S1D13806). Product specs at
-          <http://www.erd.epson.com/vdc/html/legacy_13xxx.htm>
+          <http://vdc.epson.com/>
 config FB_ATMEL
        tristate "AT91/AT32 LCD Controller support"
@@ -1323,7 +1323,7 @@ config FB_RADEON
          don't need to choose this to run the Radeon in plain VGA mode.
          There is a product page at
-          http://apps.ati.com/ATIcompare/
+          http://products.amd.com/en-us/GraphicCardResult.aspx
 config FB_RADEON_I2C
        bool "DDC/I2C for ATI Radeon support"
@@ -1395,7 +1395,7 @@ config FB_ATY_CT
          Say Y here to support use of ATI's 64-bit Rage boards (or other
          boards based on the Mach64 CT, VT, GT, and LT chipsets) as a
          framebuffer device.  The ATI product support page for these boards
-          is at <http://support.ati.com/products/pc/mach64/>.
+          is at <http://support.ati.com/products/pc/mach64/mach64.html>.
 config FB_ATY_GENERIC_LCD
        bool "Mach64 generic LCD support (EXPERIMENTAL)"
diff --git a/drivers/video/arcfb.c b/drivers/video/arcfb.c
index f3d7440f0072..3ec4923c2d84 100644
--- a/drivers/video/arcfb.c
+++ b/drivers/video/arcfb.c
@@ -2,7 +2,6 @@
 * linux/drivers/video/arcfb.c -- FB driver for Arc monochrome LCD board
 *
 * Copyright (C) 2005, Jaya Kumar <jayalk@intworks.biz>
- * http://www.intworks.biz/arclcd
 *
 * This file is subject to the terms and conditions of the GNU General Public
 * License. See the file COPYING in the main directory of this archive for
diff --git a/drivers/video/epson1355fb.c b/drivers/video/epson1355fb.c
index db9713b49ce9..a268cbf1cbea 100644
--- a/drivers/video/epson1355fb.c
+++ b/drivers/video/epson1355fb.c
@@ -4,7 +4,7 @@
 * Epson Research S1D13505 Embedded RAMDAC LCD/CRT Controller
 *   (previously known as SED1355)
 *
- * Cf. http://www.erd.epson.com/vdc/html/S1D13505.html
+ * Cf. http://vdc.epson.com/
 *
 *
 * Copyright (C) Hewlett-Packard Company.  All rights reserved.
diff --git a/drivers/video/fbcvt.c b/drivers/video/fbcvt.c
index 7293eaccd81b..7cb715dfc0e1 100644
--- a/drivers/video/fbcvt.c
+++ b/drivers/video/fbcvt.c
@@ -5,7 +5,7 @@
 *
 *      Based from the VESA(TM) Coordinated Video Timing Generator by
 *      Graham Loveridge April 9, 2003 available at
- *      http://www.vesa.org/public/CVT/CVTd6r1.xls
+ *      http://www.elo.utfsm.cl/~elo212/docs/CVTd6r1.xls
 *
 * This file is subject to the terms and conditions of the GNU General Public
 * License.  See the file COPYING in the main directory of this archive
diff --git a/drivers/video/metronomefb.c b/drivers/video/metronomefb.c
index 9b3d6e4584cc..63ed3b72b01c 100644
--- a/drivers/video/metronomefb.c
+++ b/drivers/video/metronomefb.c
@@ -10,7 +10,7 @@
 * Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoeven.
 *
 * This work was made possible by help and equipment support from E-Ink
- * Corporation. http://support.eink.com/community
+ * Corporation. http://www.eink.com/
 *
 * This driver is written to be used with the Metronome display controller.
 * It is intended to be architecture independent. A board specific driver
diff --git a/firmware/keyspan_pda/keyspan_pda.S b/firmware/keyspan_pda/keyspan_pda.S
index 418fe69aa5e0..f3acc197a5ef 100644
--- a/firmware/keyspan_pda/keyspan_pda.S
+++ b/firmware/keyspan_pda/keyspan_pda.S
@@ -74,7 +74,7 @@
 *  recognizes the new device ID and glues it to the real serial driver code.
 *
 * USEFUL DOCS:
- *  EzUSB Technical Reference Manual: <http://www.anchorchips.com>
+ *  EzUSB Technical Reference Manual: <http://www.cypress.com/>
 *  8051 manuals: everywhere, but try www.dalsemi.com because the EzUSB is
 *   basically the Dallas enhanced 8051 code. Remember that the EzUSB IO ports
 *   use totally different registers!
diff --git a/firmware/keyspan_pda/xircom_pgs.S b/firmware/keyspan_pda/xircom_pgs.S
index 05d99dd63776..0b79bbf0ae15 100644
--- a/firmware/keyspan_pda/xircom_pgs.S
+++ b/firmware/keyspan_pda/xircom_pgs.S
@@ -74,7 +74,7 @@
 *  recognizes the new device ID and glues it to the real serial driver code.
 *
 * USEFUL DOCS:
- *  EzUSB Technical Reference Manual: <http://www.anchorchips.com>
+ *  EzUSB Technical Reference Manual: <http://www.cypress.com/>
 *  8051 manuals: everywhere, but try www.dalsemi.com because the EzUSB is
 *   basically the Dallas enhanced 8051 code. Remember that the EzUSB IO ports
 *   use totally different registers!
diff --git a/fs/hostfs/hostfs.h b/fs/hostfs/hostfs.h
index 6bbd75c5589b..7c232c1487ee 100644
--- a/fs/hostfs/hostfs.h
+++ b/fs/hostfs/hostfs.h
@@ -28,12 +28,7 @@
 * #define ATTR_KILL_SUID       2048
 * #define ATTR_KILL_SGID       4096
 *
- * and this is because they were added in 2.5 development in this patch:
+ * and this is because they were added in 2.5 development.
- *
- * http://linux.bkbits.net:8080/linux-2.5/
- * cset@3caf4a12k4XgDzK7wyK-TGpSZ9u2Ww?nav=index.html
- * |src/.|src/include|src/include/linux|related/include/linux/fs.h
- *
 * Actually, they are not needed by most ->setattr() methods - they are set by
 * callers of notify_change() to notify that the setuid/setgid bits must be
 * dropped.
diff --git a/fs/partitions/ldm.c b/fs/partitions/ldm.c
index 648c9d8f3357..e55fefcb0dcc 100644
--- a/fs/partitions/ldm.c
+++ b/fs/partitions/ldm.c
@@ -5,7 +5,7 @@
 * Copyright (c) 2001-2007 Anton Altaparmakov
 * Copyright (C) 2001,2002 Jakob Kemi <jakob.kemi@telia.com>
 *
- * Documentation is available at http://www.linux-ntfs.org/content/view/19/37/
+ * Documentation is available at http://www.linux-ntfs.org/doku.php?id=downloads 
 *
 * This program is free software; you can redistribute it and/or modify it under
 * the terms of the GNU General Public License as published by the Free Software
diff --git a/fs/partitions/ldm.h b/fs/partitions/ldm.h
index d1fb50b28d86..374242c0971a 100644
--- a/fs/partitions/ldm.h
+++ b/fs/partitions/ldm.h
@@ -5,7 +5,7 @@
 * Copyright (c) 2001-2007 Anton Altaparmakov
 * Copyright (C) 2001,2002 Jakob Kemi <jakob.kemi@telia.com>
 *
- * Documentation is available at http://www.linux-ntfs.org/content/view/19/37/
+ * Documentation is available at http://www.linux-ntfs.org/doku.php?id=downloads 
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License as published by the Free
diff --git a/fs/reiserfs/Kconfig b/fs/reiserfs/Kconfig
index 513f431038f9..7cd46666ba2c 100644
--- a/fs/reiserfs/Kconfig
+++ b/fs/reiserfs/Kconfig
@@ -10,7 +10,8 @@ config REISERFS_FS
          In general, ReiserFS is as fast as ext2, but is very efficient with
          large directories and small files.  Additional patches are needed
-          for NFS and quotas, please see <http://www.namesys.com/> for links.
+          for NFS and quotas, please see 
+          <https://reiser4.wiki.kernel.org/index.php/Main_Page> for links.
          It is more easily extended to have features currently found in
          database and keyword search systems than block allocation based file
@@ -18,7 +19,8 @@ config REISERFS_FS
          plugins consistent with our motto ``It takes more than a license to
          make source code open.''
-          Read <http://www.namesys.com/> to learn more about reiserfs.
+          Read <https://reiser4.wiki.kernel.org/index.php/Main_Page> 
+          to learn more about reiserfs.
          Sponsored by Threshold Networks, Emusic.com, and Bigstorage.com.
diff --git a/fs/reiserfs/README b/fs/reiserfs/README
index 14e8c9d460e5..e2f7a264e3ff 100644
--- a/fs/reiserfs/README
+++ b/fs/reiserfs/README
@@ -43,7 +43,7 @@ to address the fair crediting issue in the next GPL version.)
 [END LICENSING]
 Reiserfs is a file system based on balanced tree algorithms, which is
-described at http://devlinux.com/namesys.
+described at https://reiser4.wiki.kernel.org/index.php/Main_Page 
 Stop reading here.  Go there, then return.
diff --git a/include/crypto/gf128mul.h b/include/crypto/gf128mul.h
index 4086b8ebfafe..da2530e34b26 100644
--- a/include/crypto/gf128mul.h
+++ b/include/crypto/gf128mul.h
@@ -54,8 +54,8 @@
 /* Comment by Rik:
 *
- * For some background on GF(2^128) see for example: http://-
+ * For some background on GF(2^128) see for example: 
- * csrc.nist.gov/CryptoToolkit/modes/proposedmodes/gcm/gcm-revised-spec.pdf
+ * http://csrc.nist.gov/groups/ST/toolkit/BCM/documents/proposedmodes/gcm/gcm-revised-spec.pdf 
 *
 * The elements of GF(2^128) := GF(2)[X]/(X^128-X^7-X^2-X^1-1) can
 * be mapped to computer memory in a variety of ways. Let's examine
diff --git a/include/linux/fdreg.h b/include/linux/fdreg.h
index c2eeb63b72db..61ce64169004 100644
--- a/include/linux/fdreg.h
+++ b/include/linux/fdreg.h
@@ -89,7 +89,7 @@
 /* the following commands are new in the 82078. They are not used in the
 * floppy driver, except the first three. These commands may be useful for apps
 * which use the FDRAWCMD interface. For doc, get the 82078 spec sheets at
- * http://www-techdoc.intel.com/docs/periph/fd_contr/datasheets/ */
+ * http://www.intel.com/design/archives/periphrl/docs/29046803.htm */
 #define FD_PARTID               0x18    /* part id ("extended" version cmd) */
 #define FD_SAVE                 0x2e    /* save fdc regs for later restore */
diff --git a/include/linux/if_infiniband.h b/include/linux/if_infiniband.h
index 3e659ec7dfdd..7d958475d4ac 100644
--- a/include/linux/if_infiniband.h
+++ b/include/linux/if_infiniband.h
@@ -5,7 +5,7 @@
 * <http://www.fsf.org/copyleft/gpl.html>, or the OpenIB.org BSD
 * license, available in the LICENSE.TXT file accompanying this
 * software.  These details are also available at
- * <http://openib.org/license.html>.
+ * <http://www.openfabrics.org/software_license.htm>.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
diff --git a/include/linux/n_r3964.h b/include/linux/n_r3964.h
index de24af79ebd3..54b8e0d8d916 100644
--- a/include/linux/n_r3964.h
+++ b/include/linux/n_r3964.h
@@ -4,7 +4,6 @@
 * Copyright by
 * Philips Automation Projects
 * Kassel (Germany)
- * http://www.pap-philips.de
 * -----------------------------------------------------------
 * This software may be used and distributed according to the terms of
 * the GNU General Public License, incorporated herein by reference.
diff --git a/net/ax25/Kconfig b/net/ax25/Kconfig
index 2a72aa96a568..705e53ef4af0 100644
--- a/net/ax25/Kconfig
+++ b/net/ax25/Kconfig
@@ -7,7 +7,7 @@ menuconfig HAMRADIO
        bool "Amateur Radio support"
        help
          If you want to connect your Linux box to an amateur radio, answer Y
-          here. You want to read <http://www.tapr.org/tapr/html/pkthome.html>
+          here. You want to read <http://www.tapr.org/>
          and more specifically about AX.25 on Linux
          <http://www.linux-ax25.org/>.
@@ -42,7 +42,7 @@ config AX25
          check out the file <file:Documentation/networking/ax25.txt> in the
          kernel source. More information about digital amateur radio in
          general is on the WWW at
-          <http://www.tapr.org/tapr/html/pkthome.html>.
+          <http://www.tapr.org/>.
          To compile this driver as a module, choose M here: the
          module will be called ax25.
@@ -89,7 +89,7 @@ config NETROM
          <http://www.linux-ax25.org>. You also might want to check out the
          file <file:Documentation/networking/ax25.txt>. More information about
          digital amateur radio in general is on the WWW at
-          <http://www.tapr.org/tapr/html/pkthome.html>.
+          <http://www.tapr.org/>.
          To compile this driver as a module, choose M here: the
          module will be called netrom.
@@ -108,7 +108,7 @@ config ROSE
          <http://www.linux-ax25.org>.  You also might want to check out the
          file <file:Documentation/networking/ax25.txt>. More information about
          digital amateur radio in general is on the WWW at
-          <http://www.tapr.org/tapr/html/pkthome.html>.
+          <http://www.tapr.org/>.
          To compile this driver as a module, choose M here: the
          module will be called rose.
diff --git a/net/ipv4/Kconfig b/net/ipv4/Kconfig
index 7c3a7d191249..1cc7ef270d54 100644
--- a/net/ipv4/Kconfig
+++ b/net/ipv4/Kconfig
@@ -84,7 +84,7 @@ config IP_FIB_TRIE
          An experimental study of compression methods for dynamic tries
          Stefan Nilsson and Matti Tikkanen. Algorithmica, 33(1):19-33, 2002.
-          http://www.nada.kth.se/~snilsson/public/papers/dyntrie2/
+          <http://www.csc.kth.se/~snilsson/software/dyntrie2/>
 endchoice
@@ -555,7 +555,7 @@ config TCP_CONG_VENO
        distinguishing to circumvent the difficult judgment of the packet loss
        type. TCP Veno cuts down less congestion window in response to random
        loss packets.
-        See http://www.ntu.edu.sg/home5/ZHOU0022/papers/CPFu03a.pdf
+        See <http://ieeexplore.ieee.org/xpl/freeabs_all.jsp?arnumber=1177186> 
 config TCP_CONG_YEAH
        tristate "YeAH TCP"
diff --git a/net/ipv4/cipso_ipv4.c b/net/ipv4/cipso_ipv4.c
index 3a92a76ae41d..094e150c6260 100644
--- a/net/ipv4/cipso_ipv4.c
+++ b/net/ipv4/cipso_ipv4.c
@@ -9,7 +9,7 @@
 *
 * The CIPSO draft specification can be found in the kernel's Documentation
 * directory as well as the following URL:
- *   http://netlabel.sourceforge.net/files/draft-ietf-cipso-ipsecurity-01.txt
+ *   http://tools.ietf.org/id/draft-ietf-cipso-ipsecurity-01.txt
 * The FIPS-188 specification can be found at the following URL:
 *   http://www.itl.nist.gov/fipspubs/fip188.htm
 *
diff --git a/net/ipv4/fib_trie.c b/net/ipv4/fib_trie.c
index 79d057a939ba..2230ae3bf20e 100644
--- a/net/ipv4/fib_trie.c
+++ b/net/ipv4/fib_trie.c
@@ -16,7 +16,7 @@
 *
 * An experimental study of compression methods for dynamic tries
 * Stefan Nilsson and Matti Tikkanen. Algorithmica, 33(1):19-33, 2002.
- * http://www.nada.kth.se/~snilsson/public/papers/dyntrie2/
+ * http://www.csc.kth.se/~snilsson/software/dyntrie2/
 *
 *
 * IP-address lookup using LC-tries. Stefan Nilsson and Gunnar Karlsson
diff --git a/net/ipv4/netfilter/Kconfig b/net/ipv4/netfilter/Kconfig
index 1833bdbf9805..d048275a62cb 100644
--- a/net/ipv4/netfilter/Kconfig
+++ b/net/ipv4/netfilter/Kconfig
@@ -147,7 +147,7 @@ config IP_NF_TARGET_ULOG
          which can only be viewed through syslog.
          The appropriate userspace logging daemon (ulogd) may be obtained from
-          <http://www.gnumonks.org/projects/ulogd/>
+          <http://www.netfilter.org/projects/ulogd/index.html>
          To compile it as a module, choose M here.  If unsure, say N.
diff --git a/net/ipv4/tcp_illinois.c b/net/ipv4/tcp_illinois.c
index 1eba160b72dc..00ca688d8964 100644
--- a/net/ipv4/tcp_illinois.c
+++ b/net/ipv4/tcp_illinois.c
@@ -6,7 +6,7 @@
 * The algorithm is described in:
 * "TCP-Illinois: A Loss and Delay-Based Congestion Control Algorithm
 *  for High-Speed Networks"
- * http://www.ews.uiuc.edu/~shaoliu/papersandslides/liubassri06perf.pdf
+ * http://www.ifp.illinois.edu/~srikant/Papers/liubassri06perf.pdf
 *
 * Implemented from description in paper and ns-2 simulation.
 * Copyright (C) 2007 Stephen Hemminger <shemminger@linux-foundation.org>
diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index e663b78a2ef6..bccce3424a63 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -428,10 +428,10 @@ EXPORT_SYMBOL(tcp_initialize_rcv_mss);
 *
 * The algorithm for RTT estimation w/o timestamps is based on
 * Dynamic Right-Sizing (DRS) by Wu Feng and Mike Fisk of LANL.
- * <http://www.lanl.gov/radiant/website/pubs/drs/lacsi2001.ps>
+ * <http://public.lanl.gov/radiant/pubs.html#DRS>
 *
 * More detail on this code can be found at
- * <http://www.psc.edu/~jheffner/senior_thesis.ps>,
+ * <http://staff.psc.edu/jheffner/>,
 * though this reference is out of date.  A new paper
 * is pending.
 */
diff --git a/net/ipv4/tcp_veno.c b/net/ipv4/tcp_veno.c
index b612acf76183..38bc0b52d745 100644
--- a/net/ipv4/tcp_veno.c
+++ b/net/ipv4/tcp_veno.c
@@ -6,7 +6,7 @@
 *    "TCP Veno: TCP Enhancement for Transmission over Wireless Access Networks."
 *    IEEE Journal on Selected Areas in Communication,
 *    Feb. 2003.
- *      See http://www.ntu.edu.sg/home5/ZHOU0022/papers/CPFu03a.pdf
+ *      See http://www.ie.cuhk.edu.hk/fileadmin/staff_upload/soung/Journal/J3.pdf
 */
 #include <linux/mm.h>
diff --git a/net/netfilter/nf_conntrack_proto_tcp.c b/net/netfilter/nf_conntrack_proto_tcp.c
index c4c885dca3bd..3fb2b73b24dc 100644
--- a/net/netfilter/nf_conntrack_proto_tcp.c
+++ b/net/netfilter/nf_conntrack_proto_tcp.c
@@ -329,8 +329,8 @@ static unsigned int get_conntrack_index(const struct tcphdr *tcph)
 /* TCP connection tracking based on 'Real Stateful TCP Packet Filtering
   in IP Filter' by Guido van Rooij.
-   http://www.nluug.nl/events/sane2000/papers.html
+   http://www.sane.nl/events/sane2000/papers.html
-   http://www.iae.nl/users/guido/papers/tcp_filtering.ps.gz
+   http://www.darkart.com/mirrors/www.obfuscation.org/ipf/
   The boundaries and the conditions are changed according to RFC793:
   the packet must intersect the window (i.e. segments may be
diff --git a/sound/oss/ac97_codec.c b/sound/oss/ac97_codec.c
index 456a1b4d7832..854c303264dc 100644
--- a/sound/oss/ac97_codec.c
+++ b/sound/oss/ac97_codec.c
@@ -21,11 +21,8 @@
 *
 **************************************************************************
 *
- * The Intel Audio Codec '97 specification is available at the Intel
+ * The Intel Audio Codec '97 specification is available at:
- * audio homepage: http://developer.intel.com/ial/scalableplatforms/audio/
+ * http://download.intel.com/support/motherboards/desktop/sb/ac97_r23.pdf
- *
- * The specification itself is currently available at:
- * ftp://download.intel.com/ial/scalableplatforms/ac97r22.pdf
 *
 **************************************************************************
 *
diff --git a/sound/pci/ens1370.c b/sound/pci/ens1370.c
index c7fba5379813..537cfba829a5 100644
--- a/sound/pci/ens1370.c
+++ b/sound/pci/ens1370.c
@@ -22,7 +22,7 @@
 /* Power-Management-Code ( CONFIG_PM )
 * for ens1371 only ( FIXME )
 * derived from cs4281.c, atiixp.c and via82xx.c
- * using http://www.alsa-project.org/~iwai/writing-an-alsa-driver/c1540.htm
+ * using http://www.alsa-project.org/~tiwai/writing-an-alsa-driver/ 
 * by Kurt J. Bosch
 */
diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c
index 6433e65c9507..a2999d678918 100644
--- a/sound/pci/intel8x0.c
+++ b/sound/pci/intel8x0.c
@@ -716,7 +716,7 @@ static void snd_intel8x0_setup_periods(struct intel8x0 *chip, struct ichdev *ich
 * Intel 82443MX running a 100MHz processor system bus has a hardware bug,
 * which aborts PCI busmaster for audio transfer.  A workaround is to set
 * the pages as non-cached.  For details, see the errata in
- *      http://www.intel.com/design/chipsets/specupdt/245051.htm
+ *      http://download.intel.com/design/chipsets/specupdt/24505108.pdf
 */
 static void fill_nocache(void *buf, int size, int nocache)
 {