aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--drivers/net/Kconfig8
-rw-r--r--drivers/net/Makefile1
-rw-r--r--drivers/net/tsi108_eth.c1708
-rw-r--r--drivers/net/tsi108_eth.h365
4 files changed, 2082 insertions, 0 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 112d4cd5c66c..05167253b254 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2251,6 +2251,14 @@ config SPIDER_NET
2251 This driver supports the Gigabit Ethernet chips present on the 2251 This driver supports the Gigabit Ethernet chips present on the
2252 Cell Processor-Based Blades from IBM. 2252 Cell Processor-Based Blades from IBM.
2253 2253
2254config TSI108_ETH
2255 tristate "Tundra TSI108 gigabit Ethernet support"
2256 depends on TSI108_BRIDGE
2257 help
2258 This driver supports Tundra TSI108 gigabit Ethernet ports.
2259 To compile this driver as a module, choose M here: the module
2260 will be called tsi108_eth.
2261
2254config GIANFAR 2262config GIANFAR
2255 tristate "Gianfar Ethernet" 2263 tristate "Gianfar Ethernet"
2256 depends on 85xx || 83xx || PPC_86xx 2264 depends on 85xx || 83xx || PPC_86xx
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 7889e4ca1844..789306ca7936 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -108,6 +108,7 @@ obj-$(CONFIG_B44) += b44.o
108obj-$(CONFIG_FORCEDETH) += forcedeth.o 108obj-$(CONFIG_FORCEDETH) += forcedeth.o
109obj-$(CONFIG_NE_H8300) += ne-h8300.o 109obj-$(CONFIG_NE_H8300) += ne-h8300.o
110 110
111obj-$(CONFIG_TSI108_ETH) += tsi108_eth.o
111obj-$(CONFIG_MV643XX_ETH) += mv643xx_eth.o 112obj-$(CONFIG_MV643XX_ETH) += mv643xx_eth.o
112obj-$(CONFIG_QLA3XXX) += qla3xxx.o 113obj-$(CONFIG_QLA3XXX) += qla3xxx.o
113 114
diff --git a/drivers/net/tsi108_eth.c b/drivers/net/tsi108_eth.c
new file mode 100644
index 000000000000..893808ab3742
--- /dev/null
+++ b/drivers/net/tsi108_eth.c
@@ -0,0 +1,1708 @@
1/*******************************************************************************
2
3 Copyright(c) 2006 Tundra Semiconductor Corporation.
4
5 This program is free software; you can redistribute it and/or modify it
6 under the terms of the GNU General Public License as published by the Free
7 Software Foundation; either version 2 of the License, or (at your option)
8 any later version.
9
10 This program is distributed in the hope that it will be useful, but WITHOUT
11 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
13 more details.
14
15 You should have received a copy of the GNU General Public License along with
16 this program; if not, write to the Free Software Foundation, Inc., 59
17 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
18
19*******************************************************************************/
20
21/* This driver is based on the driver code originally developed
22 * for the Intel IOC80314 (ForestLake) Gigabit Ethernet by
23 * scott.wood@timesys.com * Copyright (C) 2003 TimeSys Corporation
24 *
25 * Currently changes from original version are:
26 * - porting to Tsi108-based platform and kernel 2.6 (kong.lai@tundra.com)
27 * - modifications to handle two ports independently and support for
28 * additional PHY devices (alexandre.bounine@tundra.com)
29 * - Get hardware information from platform device. (tie-fei.zang@freescale.com)
30 *
31 */
32
33#include <linux/module.h>
34#include <linux/types.h>
35#include <linux/init.h>
36#include <linux/net.h>
37#include <linux/netdevice.h>
38#include <linux/etherdevice.h>
39#include <linux/skbuff.h>
40#include <linux/slab.h>
41#include <linux/sched.h>
42#include <linux/spinlock.h>
43#include <linux/delay.h>
44#include <linux/crc32.h>
45#include <linux/mii.h>
46#include <linux/device.h>
47#include <linux/pci.h>
48#include <linux/rtnetlink.h>
49#include <linux/timer.h>
50#include <linux/platform_device.h>
51#include <linux/etherdevice.h>
52
53#include <asm/system.h>
54#include <asm/io.h>
55#include <asm/tsi108.h>
56
57#include "tsi108_eth.h"
58
59#define MII_READ_DELAY 10000 /* max link wait time in msec */
60
61#define TSI108_RXRING_LEN 256
62
63/* NOTE: The driver currently does not support receiving packets
64 * larger than the buffer size, so don't decrease this (unless you
65 * want to add such support).
66 */
67#define TSI108_RXBUF_SIZE 1536
68
69#define TSI108_TXRING_LEN 256
70
71#define TSI108_TX_INT_FREQ 64
72
73/* Check the phy status every half a second. */
74#define CHECK_PHY_INTERVAL (HZ/2)
75
76static int tsi108_init_one(struct platform_device *pdev);
77static int tsi108_ether_remove(struct platform_device *pdev);
78
79struct tsi108_prv_data {
80 void __iomem *regs; /* Base of normal regs */
81 void __iomem *phyregs; /* Base of register bank used for PHY access */
82
83 unsigned int phy; /* Index of PHY for this interface */
84 unsigned int irq_num;
85 unsigned int id;
86
87 struct timer_list timer;/* Timer that triggers the check phy function */
88 unsigned int rxtail; /* Next entry in rxring to read */
89 unsigned int rxhead; /* Next entry in rxring to give a new buffer */
90 unsigned int rxfree; /* Number of free, allocated RX buffers */
91
92 unsigned int rxpending; /* Non-zero if there are still descriptors
93 * to be processed from a previous descriptor
94 * interrupt condition that has been cleared */
95
96 unsigned int txtail; /* Next TX descriptor to check status on */
97 unsigned int txhead; /* Next TX descriptor to use */
98
99 /* Number of free TX descriptors. This could be calculated from
100 * rxhead and rxtail if one descriptor were left unused to disambiguate
101 * full and empty conditions, but it's simpler to just keep track
102 * explicitly. */
103
104 unsigned int txfree;
105
106 unsigned int phy_ok; /* The PHY is currently powered on. */
107
108 /* PHY status (duplex is 1 for half, 2 for full,
109 * so that the default 0 indicates that neither has
110 * yet been configured). */
111
112 unsigned int link_up;
113 unsigned int speed;
114 unsigned int duplex;
115
116 tx_desc *txring;
117 rx_desc *rxring;
118 struct sk_buff *txskbs[TSI108_TXRING_LEN];
119 struct sk_buff *rxskbs[TSI108_RXRING_LEN];
120
121 dma_addr_t txdma, rxdma;
122
123 /* txlock nests in misclock and phy_lock */
124
125 spinlock_t txlock, misclock;
126
127 /* stats is used to hold the upper bits of each hardware counter,
128 * and tmpstats is used to hold the full values for returning
129 * to the caller of get_stats(). They must be separate in case
130 * an overflow interrupt occurs before the stats are consumed.
131 */
132
133 struct net_device_stats stats;
134 struct net_device_stats tmpstats;
135
136 /* These stats are kept separate in hardware, thus require individual
137 * fields for handling carry. They are combined in get_stats.
138 */
139
140 unsigned long rx_fcs; /* Add to rx_frame_errors */
141 unsigned long rx_short_fcs; /* Add to rx_frame_errors */
142 unsigned long rx_long_fcs; /* Add to rx_frame_errors */
143 unsigned long rx_underruns; /* Add to rx_length_errors */
144 unsigned long rx_overruns; /* Add to rx_length_errors */
145
146 unsigned long tx_coll_abort; /* Add to tx_aborted_errors/collisions */
147 unsigned long tx_pause_drop; /* Add to tx_aborted_errors */
148
149 unsigned long mc_hash[16];
150 u32 msg_enable; /* debug message level */
151 struct mii_if_info mii_if;
152 unsigned int init_media;
153};
154
155/* Structure for a device driver */
156
157static struct platform_driver tsi_eth_driver = {
158 .probe = tsi108_init_one,
159 .remove = tsi108_ether_remove,
160 .driver = {
161 .name = "tsi-ethernet",
162 },
163};
164
165static void tsi108_timed_checker(unsigned long dev_ptr);
166
167static void dump_eth_one(struct net_device *dev)
168{
169 struct tsi108_prv_data *data = netdev_priv(dev);
170
171 printk("Dumping %s...\n", dev->name);
172 printk("intstat %x intmask %x phy_ok %d"
173 " link %d speed %d duplex %d\n",
174 TSI_READ(TSI108_EC_INTSTAT),
175 TSI_READ(TSI108_EC_INTMASK), data->phy_ok,
176 data->link_up, data->speed, data->duplex);
177
178 printk("TX: head %d, tail %d, free %d, stat %x, estat %x, err %x\n",
179 data->txhead, data->txtail, data->txfree,
180 TSI_READ(TSI108_EC_TXSTAT),
181 TSI_READ(TSI108_EC_TXESTAT),
182 TSI_READ(TSI108_EC_TXERR));
183
184 printk("RX: head %d, tail %d, free %d, stat %x,"
185 " estat %x, err %x, pending %d\n\n",
186 data->rxhead, data->rxtail, data->rxfree,
187 TSI_READ(TSI108_EC_RXSTAT),
188 TSI_READ(TSI108_EC_RXESTAT),
189 TSI_READ(TSI108_EC_RXERR), data->rxpending);
190}
191
192/* Synchronization is needed between the thread and up/down events.
193 * Note that the PHY is accessed through the same registers for both
194 * interfaces, so this can't be made interface-specific.
195 */
196
197static DEFINE_SPINLOCK(phy_lock);
198
199static int tsi108_read_mii(struct tsi108_prv_data *data, int reg)
200{
201 unsigned i;
202
203 TSI_WRITE_PHY(TSI108_MAC_MII_ADDR,
204 (data->phy << TSI108_MAC_MII_ADDR_PHY) |
205 (reg << TSI108_MAC_MII_ADDR_REG));
206 TSI_WRITE_PHY(TSI108_MAC_MII_CMD, 0);
207 TSI_WRITE_PHY(TSI108_MAC_MII_CMD, TSI108_MAC_MII_CMD_READ);
208 for (i = 0; i < 100; i++) {
209 if (!(TSI_READ_PHY(TSI108_MAC_MII_IND) &
210 (TSI108_MAC_MII_IND_NOTVALID | TSI108_MAC_MII_IND_BUSY)))
211 break;
212 udelay(10);
213 }
214
215 if (i == 100)
216 return 0xffff;
217 else
218 return (TSI_READ_PHY(TSI108_MAC_MII_DATAIN));
219}
220
221static void tsi108_write_mii(struct tsi108_prv_data *data,
222 int reg, u16 val)
223{
224 unsigned i = 100;
225 TSI_WRITE_PHY(TSI108_MAC_MII_ADDR,
226 (data->phy << TSI108_MAC_MII_ADDR_PHY) |
227 (reg << TSI108_MAC_MII_ADDR_REG));
228 TSI_WRITE_PHY(TSI108_MAC_MII_DATAOUT, val);
229 while (i--) {
230 if(!(TSI_READ_PHY(TSI108_MAC_MII_IND) &
231 TSI108_MAC_MII_IND_BUSY))
232 break;
233 udelay(10);
234 }
235}
236
237static int tsi108_mdio_read(struct net_device *dev, int addr, int reg)
238{
239 struct tsi108_prv_data *data = netdev_priv(dev);
240 return tsi108_read_mii(data, reg);
241}
242
243static void tsi108_mdio_write(struct net_device *dev, int addr, int reg, int val)
244{
245 struct tsi108_prv_data *data = netdev_priv(dev);
246 tsi108_write_mii(data, reg, val);
247}
248
249static inline void tsi108_write_tbi(struct tsi108_prv_data *data,
250 int reg, u16 val)
251{
252 unsigned i = 1000;
253 TSI_WRITE(TSI108_MAC_MII_ADDR,
254 (0x1e << TSI108_MAC_MII_ADDR_PHY)
255 | (reg << TSI108_MAC_MII_ADDR_REG));
256 TSI_WRITE(TSI108_MAC_MII_DATAOUT, val);
257 while(i--) {
258 if(!(TSI_READ(TSI108_MAC_MII_IND) & TSI108_MAC_MII_IND_BUSY))
259 return;
260 udelay(10);
261 }
262 printk(KERN_ERR "%s function time out \n", __FUNCTION__);
263}
264
265static int mii_speed(struct mii_if_info *mii)
266{
267 int advert, lpa, val, media;
268 int lpa2 = 0;
269 int speed;
270
271 if (!mii_link_ok(mii))
272 return 0;
273
274 val = (*mii->mdio_read) (mii->dev, mii->phy_id, MII_BMSR);
275 if ((val & BMSR_ANEGCOMPLETE) == 0)
276 return 0;
277
278 advert = (*mii->mdio_read) (mii->dev, mii->phy_id, MII_ADVERTISE);
279 lpa = (*mii->mdio_read) (mii->dev, mii->phy_id, MII_LPA);
280 media = mii_nway_result(advert & lpa);
281
282 if (mii->supports_gmii)
283 lpa2 = mii->mdio_read(mii->dev, mii->phy_id, MII_STAT1000);
284
285 speed = lpa2 & (LPA_1000FULL | LPA_1000HALF) ? 1000 :
286 (media & (ADVERTISE_100FULL | ADVERTISE_100HALF) ? 100 : 10);
287 return speed;
288}
289
290static void tsi108_check_phy(struct net_device *dev)
291{
292 struct tsi108_prv_data *data = netdev_priv(dev);
293 u32 mac_cfg2_reg, portctrl_reg;
294 u32 duplex;
295 u32 speed;
296 unsigned long flags;
297
298 /* Do a dummy read, as for some reason the first read
299 * after a link becomes up returns link down, even if
300 * it's been a while since the link came up.
301 */
302
303 spin_lock_irqsave(&phy_lock, flags);
304
305 if (!data->phy_ok)
306 goto out;
307
308 tsi108_read_mii(data, MII_BMSR);
309
310 duplex = mii_check_media(&data->mii_if, netif_msg_link(data), data->init_media);
311 data->init_media = 0;
312
313 if (netif_carrier_ok(dev)) {
314
315 speed = mii_speed(&data->mii_if);
316
317 if ((speed != data->speed) || duplex) {
318
319 mac_cfg2_reg = TSI_READ(TSI108_MAC_CFG2);
320 portctrl_reg = TSI_READ(TSI108_EC_PORTCTRL);
321
322 mac_cfg2_reg &= ~TSI108_MAC_CFG2_IFACE_MASK;
323
324 if (speed == 1000) {
325 mac_cfg2_reg |= TSI108_MAC_CFG2_GIG;
326 portctrl_reg &= ~TSI108_EC_PORTCTRL_NOGIG;
327 } else {
328 mac_cfg2_reg |= TSI108_MAC_CFG2_NOGIG;
329 portctrl_reg |= TSI108_EC_PORTCTRL_NOGIG;
330 }
331
332 data->speed = speed;
333
334 if (data->mii_if.full_duplex) {
335 mac_cfg2_reg |= TSI108_MAC_CFG2_FULLDUPLEX;
336 portctrl_reg &= ~TSI108_EC_PORTCTRL_HALFDUPLEX;
337 data->duplex = 2;
338 } else {
339 mac_cfg2_reg &= ~TSI108_MAC_CFG2_FULLDUPLEX;
340 portctrl_reg |= TSI108_EC_PORTCTRL_HALFDUPLEX;
341 data->duplex = 1;
342 }
343
344 TSI_WRITE(TSI108_MAC_CFG2, mac_cfg2_reg);
345 TSI_WRITE(TSI108_EC_PORTCTRL, portctrl_reg);
346
347 if (data->link_up == 0) {
348 /* The manual says it can take 3-4 usecs for the speed change
349 * to take effect.
350 */
351 udelay(5);
352
353 spin_lock(&data->txlock);
354 if (is_valid_ether_addr(dev->dev_addr) && data->txfree)
355 netif_wake_queue(dev);
356
357 data->link_up = 1;
358 spin_unlock(&data->txlock);
359 }
360 }
361
362 } else {
363 if (data->link_up == 1) {
364 netif_stop_queue(dev);
365 data->link_up = 0;
366 printk(KERN_NOTICE "%s : link is down\n", dev->name);
367 }
368
369 goto out;
370 }
371
372
373out:
374 spin_unlock_irqrestore(&phy_lock, flags);
375}
376
377static inline void
378tsi108_stat_carry_one(int carry, int carry_bit, int carry_shift,
379 unsigned long *upper)
380{
381 if (carry & carry_bit)
382 *upper += carry_shift;
383}
384
385static void tsi108_stat_carry(struct net_device *dev)
386{
387 struct tsi108_prv_data *data = netdev_priv(dev);
388 u32 carry1, carry2;
389
390 spin_lock_irq(&data->misclock);
391
392 carry1 = TSI_READ(TSI108_STAT_CARRY1);
393 carry2 = TSI_READ(TSI108_STAT_CARRY2);
394
395 TSI_WRITE(TSI108_STAT_CARRY1, carry1);
396 TSI_WRITE(TSI108_STAT_CARRY2, carry2);
397
398 tsi108_stat_carry_one(carry1, TSI108_STAT_CARRY1_RXBYTES,
399 TSI108_STAT_RXBYTES_CARRY, &data->stats.rx_bytes);
400
401 tsi108_stat_carry_one(carry1, TSI108_STAT_CARRY1_RXPKTS,
402 TSI108_STAT_RXPKTS_CARRY,
403 &data->stats.rx_packets);
404
405 tsi108_stat_carry_one(carry1, TSI108_STAT_CARRY1_RXFCS,
406 TSI108_STAT_RXFCS_CARRY, &data->rx_fcs);
407
408 tsi108_stat_carry_one(carry1, TSI108_STAT_CARRY1_RXMCAST,
409 TSI108_STAT_RXMCAST_CARRY,
410 &data->stats.multicast);
411
412 tsi108_stat_carry_one(carry1, TSI108_STAT_CARRY1_RXALIGN,
413 TSI108_STAT_RXALIGN_CARRY,
414 &data->stats.rx_frame_errors);
415
416 tsi108_stat_carry_one(carry1, TSI108_STAT_CARRY1_RXLENGTH,
417 TSI108_STAT_RXLENGTH_CARRY,
418 &data->stats.rx_length_errors);
419
420 tsi108_stat_carry_one(carry1, TSI108_STAT_CARRY1_RXRUNT,
421 TSI108_STAT_RXRUNT_CARRY, &data->rx_underruns);
422
423 tsi108_stat_carry_one(carry1, TSI108_STAT_CARRY1_RXJUMBO,
424 TSI108_STAT_RXJUMBO_CARRY, &data->rx_overruns);
425
426 tsi108_stat_carry_one(carry1, TSI108_STAT_CARRY1_RXFRAG,
427 TSI108_STAT_RXFRAG_CARRY, &data->rx_short_fcs);
428
429 tsi108_stat_carry_one(carry1, TSI108_STAT_CARRY1_RXJABBER,
430 TSI108_STAT_RXJABBER_CARRY, &data->rx_long_fcs);
431
432 tsi108_stat_carry_one(carry1, TSI108_STAT_CARRY1_RXDROP,
433 TSI108_STAT_RXDROP_CARRY,
434 &data->stats.rx_missed_errors);
435
436 tsi108_stat_carry_one(carry2, TSI108_STAT_CARRY2_TXBYTES,
437 TSI108_STAT_TXBYTES_CARRY, &data->stats.tx_bytes);
438
439 tsi108_stat_carry_one(carry2, TSI108_STAT_CARRY2_TXPKTS,
440 TSI108_STAT_TXPKTS_CARRY,
441 &data->stats.tx_packets);
442
443 tsi108_stat_carry_one(carry2, TSI108_STAT_CARRY2_TXEXDEF,
444 TSI108_STAT_TXEXDEF_CARRY,
445 &data->stats.tx_aborted_errors);
446
447 tsi108_stat_carry_one(carry2, TSI108_STAT_CARRY2_TXEXCOL,
448 TSI108_STAT_TXEXCOL_CARRY, &data->tx_coll_abort);
449
450 tsi108_stat_carry_one(carry2, TSI108_STAT_CARRY2_TXTCOL,
451 TSI108_STAT_TXTCOL_CARRY,
452 &data->stats.collisions);
453
454 tsi108_stat_carry_one(carry2, TSI108_STAT_CARRY2_TXPAUSE,
455 TSI108_STAT_TXPAUSEDROP_CARRY,
456 &data->tx_pause_drop);
457
458 spin_unlock_irq(&data->misclock);
459}
460
461/* Read a stat counter atomically with respect to carries.
462 * data->misclock must be held.
463 */
464static inline unsigned long
465tsi108_read_stat(struct tsi108_prv_data * data, int reg, int carry_bit,
466 int carry_shift, unsigned long *upper)
467{
468 int carryreg;
469 unsigned long val;
470
471 if (reg < 0xb0)
472 carryreg = TSI108_STAT_CARRY1;
473 else
474 carryreg = TSI108_STAT_CARRY2;
475
476 again:
477 val = TSI_READ(reg) | *upper;
478
479 /* Check to see if it overflowed, but the interrupt hasn't
480 * been serviced yet. If so, handle the carry here, and
481 * try again.
482 */
483
484 if (unlikely(TSI_READ(carryreg) & carry_bit)) {
485 *upper += carry_shift;
486 TSI_WRITE(carryreg, carry_bit);
487 goto again;
488 }
489
490 return val;
491}
492
493static struct net_device_stats *tsi108_get_stats(struct net_device *dev)
494{
495 unsigned long excol;
496
497 struct tsi108_prv_data *data = netdev_priv(dev);
498 spin_lock_irq(&data->misclock);
499
500 data->tmpstats.rx_packets =
501 tsi108_read_stat(data, TSI108_STAT_RXPKTS,
502 TSI108_STAT_CARRY1_RXPKTS,
503 TSI108_STAT_RXPKTS_CARRY, &data->stats.rx_packets);
504
505 data->tmpstats.tx_packets =
506 tsi108_read_stat(data, TSI108_STAT_TXPKTS,
507 TSI108_STAT_CARRY2_TXPKTS,
508 TSI108_STAT_TXPKTS_CARRY, &data->stats.tx_packets);
509
510 data->tmpstats.rx_bytes =
511 tsi108_read_stat(data, TSI108_STAT_RXBYTES,
512 TSI108_STAT_CARRY1_RXBYTES,
513 TSI108_STAT_RXBYTES_CARRY, &data->stats.rx_bytes);
514
515 data->tmpstats.tx_bytes =
516 tsi108_read_stat(data, TSI108_STAT_TXBYTES,
517 TSI108_STAT_CARRY2_TXBYTES,
518 TSI108_STAT_TXBYTES_CARRY, &data->stats.tx_bytes);
519
520 data->tmpstats.multicast =
521 tsi108_read_stat(data, TSI108_STAT_RXMCAST,
522 TSI108_STAT_CARRY1_RXMCAST,
523 TSI108_STAT_RXMCAST_CARRY, &data->stats.multicast);
524
525 excol = tsi108_read_stat(data, TSI108_STAT_TXEXCOL,
526 TSI108_STAT_CARRY2_TXEXCOL,
527 TSI108_STAT_TXEXCOL_CARRY,
528 &data->tx_coll_abort);
529
530 data->tmpstats.collisions =
531 tsi108_read_stat(data, TSI108_STAT_TXTCOL,
532 TSI108_STAT_CARRY2_TXTCOL,
533 TSI108_STAT_TXTCOL_CARRY, &data->stats.collisions);
534
535 data->tmpstats.collisions += excol;
536
537 data->tmpstats.rx_length_errors =
538 tsi108_read_stat(data, TSI108_STAT_RXLENGTH,
539 TSI108_STAT_CARRY1_RXLENGTH,
540 TSI108_STAT_RXLENGTH_CARRY,
541 &data->stats.rx_length_errors);
542
543 data->tmpstats.rx_length_errors +=
544 tsi108_read_stat(data, TSI108_STAT_RXRUNT,
545 TSI108_STAT_CARRY1_RXRUNT,
546 TSI108_STAT_RXRUNT_CARRY, &data->rx_underruns);
547
548 data->tmpstats.rx_length_errors +=
549 tsi108_read_stat(data, TSI108_STAT_RXJUMBO,
550 TSI108_STAT_CARRY1_RXJUMBO,
551 TSI108_STAT_RXJUMBO_CARRY, &data->rx_overruns);
552
553 data->tmpstats.rx_frame_errors =
554 tsi108_read_stat(data, TSI108_STAT_RXALIGN,
555 TSI108_STAT_CARRY1_RXALIGN,
556 TSI108_STAT_RXALIGN_CARRY,
557 &data->stats.rx_frame_errors);
558
559 data->tmpstats.rx_frame_errors +=
560 tsi108_read_stat(data, TSI108_STAT_RXFCS,
561 TSI108_STAT_CARRY1_RXFCS, TSI108_STAT_RXFCS_CARRY,
562 &data->rx_fcs);
563
564 data->tmpstats.rx_frame_errors +=
565 tsi108_read_stat(data, TSI108_STAT_RXFRAG,
566 TSI108_STAT_CARRY1_RXFRAG,
567 TSI108_STAT_RXFRAG_CARRY, &data->rx_short_fcs);
568
569 data->tmpstats.rx_missed_errors =
570 tsi108_read_stat(data, TSI108_STAT_RXDROP,
571 TSI108_STAT_CARRY1_RXDROP,
572 TSI108_STAT_RXDROP_CARRY,
573 &data->stats.rx_missed_errors);
574
575 /* These three are maintained by software. */
576 data->tmpstats.rx_fifo_errors = data->stats.rx_fifo_errors;
577 data->tmpstats.rx_crc_errors = data->stats.rx_crc_errors;
578
579 data->tmpstats.tx_aborted_errors =
580 tsi108_read_stat(data, TSI108_STAT_TXEXDEF,
581 TSI108_STAT_CARRY2_TXEXDEF,
582 TSI108_STAT_TXEXDEF_CARRY,
583 &data->stats.tx_aborted_errors);
584
585 data->tmpstats.tx_aborted_errors +=
586 tsi108_read_stat(data, TSI108_STAT_TXPAUSEDROP,
587 TSI108_STAT_CARRY2_TXPAUSE,
588 TSI108_STAT_TXPAUSEDROP_CARRY,
589 &data->tx_pause_drop);
590
591 data->tmpstats.tx_aborted_errors += excol;
592
593 data->tmpstats.tx_errors = data->tmpstats.tx_aborted_errors;
594 data->tmpstats.rx_errors = data->tmpstats.rx_length_errors +
595 data->tmpstats.rx_crc_errors +
596 data->tmpstats.rx_frame_errors +
597 data->tmpstats.rx_fifo_errors + data->tmpstats.rx_missed_errors;
598
599 spin_unlock_irq(&data->misclock);
600 return &data->tmpstats;
601}
602
603static void tsi108_restart_rx(struct tsi108_prv_data * data, struct net_device *dev)
604{
605 TSI_WRITE(TSI108_EC_RXQ_PTRHIGH,
606 TSI108_EC_RXQ_PTRHIGH_VALID);
607
608 TSI_WRITE(TSI108_EC_RXCTRL, TSI108_EC_RXCTRL_GO
609 | TSI108_EC_RXCTRL_QUEUE0);
610}
611
612static void tsi108_restart_tx(struct tsi108_prv_data * data)
613{
614 TSI_WRITE(TSI108_EC_TXQ_PTRHIGH,
615 TSI108_EC_TXQ_PTRHIGH_VALID);
616
617 TSI_WRITE(TSI108_EC_TXCTRL, TSI108_EC_TXCTRL_IDLEINT |
618 TSI108_EC_TXCTRL_GO | TSI108_EC_TXCTRL_QUEUE0);
619}
620
621/* txlock must be held by caller, with IRQs disabled, and
622 * with permission to re-enable them when the lock is dropped.
623 */
624static void tsi108_complete_tx(struct net_device *dev)
625{
626 struct tsi108_prv_data *data = netdev_priv(dev);
627 int tx;
628 struct sk_buff *skb;
629 int release = 0;
630
631 while (!data->txfree || data->txhead != data->txtail) {
632 tx = data->txtail;
633
634 if (data->txring[tx].misc & TSI108_TX_OWN)
635 break;
636
637 skb = data->txskbs[tx];
638
639 if (!(data->txring[tx].misc & TSI108_TX_OK))
640 printk("%s: bad tx packet, misc %x\n",
641 dev->name, data->txring[tx].misc);
642
643 data->txtail = (data->txtail + 1) % TSI108_TXRING_LEN;
644 data->txfree++;
645
646 if (data->txring[tx].misc & TSI108_TX_EOF) {
647 dev_kfree_skb_any(skb);
648 release++;
649 }
650 }
651
652 if (release) {
653 if (is_valid_ether_addr(dev->dev_addr) && data->link_up)
654 netif_wake_queue(dev);
655 }
656}
657
658static int tsi108_send_packet(struct sk_buff * skb, struct net_device *dev)
659{
660 struct tsi108_prv_data *data = netdev_priv(dev);
661 int frags = skb_shinfo(skb)->nr_frags + 1;
662 int i;
663
664 if (!data->phy_ok && net_ratelimit())
665 printk(KERN_ERR "%s: Transmit while PHY is down!\n", dev->name);
666
667 if (!data->link_up) {
668 printk(KERN_ERR "%s: Transmit while link is down!\n",
669 dev->name);
670 netif_stop_queue(dev);
671 return NETDEV_TX_BUSY;
672 }
673
674 if (data->txfree < MAX_SKB_FRAGS + 1) {
675 netif_stop_queue(dev);
676
677 if (net_ratelimit())
678 printk(KERN_ERR "%s: Transmit with full tx ring!\n",
679 dev->name);
680 return NETDEV_TX_BUSY;
681 }
682
683 if (data->txfree - frags < MAX_SKB_FRAGS + 1) {
684 netif_stop_queue(dev);
685 }
686
687 spin_lock_irq(&data->txlock);
688
689 for (i = 0; i < frags; i++) {
690 int misc = 0;
691 int tx = data->txhead;
692
693 /* This is done to mark every TSI108_TX_INT_FREQ tx buffers with
694 * the interrupt bit. TX descriptor-complete interrupts are
695 * enabled when the queue fills up, and masked when there is
696 * still free space. This way, when saturating the outbound
697 * link, the tx interrupts are kept to a reasonable level.
698 * When the queue is not full, reclamation of skbs still occurs
699 * as new packets are transmitted, or on a queue-empty
700 * interrupt.
701 */
702
703 if ((tx % TSI108_TX_INT_FREQ == 0) &&
704 ((TSI108_TXRING_LEN - data->txfree) >= TSI108_TX_INT_FREQ))
705 misc = TSI108_TX_INT;
706
707 data->txskbs[tx] = skb;
708
709 if (i == 0) {
710 data->txring[tx].buf0 = dma_map_single(NULL, skb->data,
711 skb->len - skb->data_len, DMA_TO_DEVICE);
712 data->txring[tx].len = skb->len - skb->data_len;
713 misc |= TSI108_TX_SOF;
714 } else {
715 skb_frag_t *frag = &skb_shinfo(skb)->frags[i - 1];
716
717 data->txring[tx].buf0 =
718 dma_map_page(NULL, frag->page, frag->page_offset,
719 frag->size, DMA_TO_DEVICE);
720 data->txring[tx].len = frag->size;
721 }
722
723 if (i == frags - 1)
724 misc |= TSI108_TX_EOF;
725
726 if (netif_msg_pktdata(data)) {
727 int i;
728 printk("%s: Tx Frame contents (%d)\n", dev->name,
729 skb->len);
730 for (i = 0; i < skb->len; i++)
731 printk(" %2.2x", skb->data[i]);
732 printk(".\n");
733 }
734 data->txring[tx].misc = misc | TSI108_TX_OWN;
735
736 data->txhead = (data->txhead + 1) % TSI108_TXRING_LEN;
737 data->txfree--;
738 }
739
740 tsi108_complete_tx(dev);
741
742 /* This must be done after the check for completed tx descriptors,
743 * so that the tail pointer is correct.
744 */
745
746 if (!(TSI_READ(TSI108_EC_TXSTAT) & TSI108_EC_TXSTAT_QUEUE0))
747 tsi108_restart_tx(data);
748
749 spin_unlock_irq(&data->txlock);
750 return NETDEV_TX_OK;
751}
752
753static int tsi108_complete_rx(struct net_device *dev, int budget)
754{
755 struct tsi108_prv_data *data = netdev_priv(dev);
756 int done = 0;
757
758 while (data->rxfree && done != budget) {
759 int rx = data->rxtail;
760 struct sk_buff *skb;
761
762 if (data->rxring[rx].misc & TSI108_RX_OWN)
763 break;
764
765 skb = data->rxskbs[rx];
766 data->rxtail = (data->rxtail + 1) % TSI108_RXRING_LEN;
767 data->rxfree--;
768 done++;
769
770 if (data->rxring[rx].misc & TSI108_RX_BAD) {
771 spin_lock_irq(&data->misclock);
772
773 if (data->rxring[rx].misc & TSI108_RX_CRC)
774 data->stats.rx_crc_errors++;
775 if (data->rxring[rx].misc & TSI108_RX_OVER)
776 data->stats.rx_fifo_errors++;
777
778 spin_unlock_irq(&data->misclock);
779
780 dev_kfree_skb_any(skb);
781 continue;
782 }
783 if (netif_msg_pktdata(data)) {
784 int i;
785 printk("%s: Rx Frame contents (%d)\n",
786 dev->name, data->rxring[rx].len);
787 for (i = 0; i < data->rxring[rx].len; i++)
788 printk(" %2.2x", skb->data[i]);
789 printk(".\n");
790 }
791
792 skb->dev = dev;
793 skb_put(skb, data->rxring[rx].len);
794 skb->protocol = eth_type_trans(skb, dev);
795 netif_receive_skb(skb);
796 dev->last_rx = jiffies;
797 }
798
799 return done;
800}
801
802static int tsi108_refill_rx(struct net_device *dev, int budget)
803{
804 struct tsi108_prv_data *data = netdev_priv(dev);
805 int done = 0;
806
807 while (data->rxfree != TSI108_RXRING_LEN && done != budget) {
808 int rx = data->rxhead;
809 struct sk_buff *skb;
810
811 data->rxskbs[rx] = skb = dev_alloc_skb(TSI108_RXBUF_SIZE + 2);
812 if (!skb)
813 break;
814
815 skb_reserve(skb, 2); /* Align the data on a 4-byte boundary. */
816
817 data->rxring[rx].buf0 = dma_map_single(NULL, skb->data,
818 TSI108_RX_SKB_SIZE,
819 DMA_FROM_DEVICE);
820
821 /* Sometimes the hardware sets blen to zero after packet
822 * reception, even though the manual says that it's only ever
823 * modified by the driver.
824 */
825
826 data->rxring[rx].blen = TSI108_RX_SKB_SIZE;
827 data->rxring[rx].misc = TSI108_RX_OWN | TSI108_RX_INT;
828
829 data->rxhead = (data->rxhead + 1) % TSI108_RXRING_LEN;
830 data->rxfree++;
831 done++;
832 }
833
834 if (done != 0 && !(TSI_READ(TSI108_EC_RXSTAT) &
835 TSI108_EC_RXSTAT_QUEUE0))
836 tsi108_restart_rx(data, dev);
837
838 return done;
839}
840
841static int tsi108_poll(struct net_device *dev, int *budget)
842{
843 struct tsi108_prv_data *data = netdev_priv(dev);
844 u32 estat = TSI_READ(TSI108_EC_RXESTAT);
845 u32 intstat = TSI_READ(TSI108_EC_INTSTAT);
846 int total_budget = min(*budget, dev->quota);
847 int num_received = 0, num_filled = 0, budget_used;
848
849 intstat &= TSI108_INT_RXQUEUE0 | TSI108_INT_RXTHRESH |
850 TSI108_INT_RXOVERRUN | TSI108_INT_RXERROR | TSI108_INT_RXWAIT;
851
852 TSI_WRITE(TSI108_EC_RXESTAT, estat);
853 TSI_WRITE(TSI108_EC_INTSTAT, intstat);
854
855 if (data->rxpending || (estat & TSI108_EC_RXESTAT_Q0_DESCINT))
856 num_received = tsi108_complete_rx(dev, total_budget);
857
858 /* This should normally fill no more slots than the number of
859 * packets received in tsi108_complete_rx(). The exception
860 * is when we previously ran out of memory for RX SKBs. In that
861 * case, it's helpful to obey the budget, not only so that the
862 * CPU isn't hogged, but so that memory (which may still be low)
863 * is not hogged by one device.
864 *
865 * A work unit is considered to be two SKBs to allow us to catch
866 * up when the ring has shrunk due to out-of-memory but we're
867 * still removing the full budget's worth of packets each time.
868 */
869
870 if (data->rxfree < TSI108_RXRING_LEN)
871 num_filled = tsi108_refill_rx(dev, total_budget * 2);
872
873 if (intstat & TSI108_INT_RXERROR) {
874 u32 err = TSI_READ(TSI108_EC_RXERR);
875 TSI_WRITE(TSI108_EC_RXERR, err);
876
877 if (err) {
878 if (net_ratelimit())
879 printk(KERN_DEBUG "%s: RX error %x\n",
880 dev->name, err);
881
882 if (!(TSI_READ(TSI108_EC_RXSTAT) &
883 TSI108_EC_RXSTAT_QUEUE0))
884 tsi108_restart_rx(data, dev);
885 }
886 }
887
888 if (intstat & TSI108_INT_RXOVERRUN) {
889 spin_lock_irq(&data->misclock);
890 data->stats.rx_fifo_errors++;
891 spin_unlock_irq(&data->misclock);
892 }
893
894 budget_used = max(num_received, num_filled / 2);
895
896 *budget -= budget_used;
897 dev->quota -= budget_used;
898
899 if (budget_used != total_budget) {
900 data->rxpending = 0;
901 netif_rx_complete(dev);
902
903 TSI_WRITE(TSI108_EC_INTMASK,
904 TSI_READ(TSI108_EC_INTMASK)
905 & ~(TSI108_INT_RXQUEUE0
906 | TSI108_INT_RXTHRESH |
907 TSI108_INT_RXOVERRUN |
908 TSI108_INT_RXERROR |
909 TSI108_INT_RXWAIT));
910
911 /* IRQs are level-triggered, so no need to re-check */
912 return 0;
913 } else {
914 data->rxpending = 1;
915 }
916
917 return 1;
918}
919
920static void tsi108_rx_int(struct net_device *dev)
921{
922 struct tsi108_prv_data *data = netdev_priv(dev);
923
924 /* A race could cause dev to already be scheduled, so it's not an
925 * error if that happens (and interrupts shouldn't be re-masked,
926 * because that can cause harmful races, if poll has already
927 * unmasked them but not cleared LINK_STATE_SCHED).
928 *
929 * This can happen if this code races with tsi108_poll(), which masks
930 * the interrupts after tsi108_irq_one() read the mask, but before
931 * netif_rx_schedule is called. It could also happen due to calls
932 * from tsi108_check_rxring().
933 */
934
935 if (netif_rx_schedule_prep(dev)) {
936 /* Mask, rather than ack, the receive interrupts. The ack
937 * will happen in tsi108_poll().
938 */
939
940 TSI_WRITE(TSI108_EC_INTMASK,
941 TSI_READ(TSI108_EC_INTMASK) |
942 TSI108_INT_RXQUEUE0
943 | TSI108_INT_RXTHRESH |
944 TSI108_INT_RXOVERRUN | TSI108_INT_RXERROR |
945 TSI108_INT_RXWAIT);
946 __netif_rx_schedule(dev);
947 } else {
948 if (!netif_running(dev)) {
949 /* This can happen if an interrupt occurs while the
950 * interface is being brought down, as the START
951 * bit is cleared before the stop function is called.
952 *
953 * In this case, the interrupts must be masked, or
954 * they will continue indefinitely.
955 *
956 * There's a race here if the interface is brought down
957 * and then up in rapid succession, as the device could
958 * be made running after the above check and before
959 * the masking below. This will only happen if the IRQ
960 * thread has a lower priority than the task brining
961 * up the interface. Fixing this race would likely
962 * require changes in generic code.
963 */
964
965 TSI_WRITE(TSI108_EC_INTMASK,
966 TSI_READ
967 (TSI108_EC_INTMASK) |
968 TSI108_INT_RXQUEUE0 |
969 TSI108_INT_RXTHRESH |
970 TSI108_INT_RXOVERRUN |
971 TSI108_INT_RXERROR |
972 TSI108_INT_RXWAIT);
973 }
974 }
975}
976
977/* If the RX ring has run out of memory, try periodically
978 * to allocate some more, as otherwise poll would never
979 * get called (apart from the initial end-of-queue condition).
980 *
981 * This is called once per second (by default) from the thread.
982 */
983
984static void tsi108_check_rxring(struct net_device *dev)
985{
986 struct tsi108_prv_data *data = netdev_priv(dev);
987
988 /* A poll is scheduled, as opposed to caling tsi108_refill_rx
989 * directly, so as to keep the receive path single-threaded
990 * (and thus not needing a lock).
991 */
992
993 if (netif_running(dev) && data->rxfree < TSI108_RXRING_LEN / 4)
994 tsi108_rx_int(dev);
995}
996
997static void tsi108_tx_int(struct net_device *dev)
998{
999 struct tsi108_prv_data *data = netdev_priv(dev);
1000 u32 estat = TSI_READ(TSI108_EC_TXESTAT);
1001
1002 TSI_WRITE(TSI108_EC_TXESTAT, estat);
1003 TSI_WRITE(TSI108_EC_INTSTAT, TSI108_INT_TXQUEUE0 |
1004 TSI108_INT_TXIDLE | TSI108_INT_TXERROR);
1005 if (estat & TSI108_EC_TXESTAT_Q0_ERR) {
1006 u32 err = TSI_READ(TSI108_EC_TXERR);
1007 TSI_WRITE(TSI108_EC_TXERR, err);
1008
1009 if (err && net_ratelimit())
1010 printk(KERN_ERR "%s: TX error %x\n", dev->name, err);
1011 }
1012
1013 if (estat & (TSI108_EC_TXESTAT_Q0_DESCINT | TSI108_EC_TXESTAT_Q0_EOQ)) {
1014 spin_lock(&data->txlock);
1015 tsi108_complete_tx(dev);
1016 spin_unlock(&data->txlock);
1017 }
1018}
1019
1020
1021static irqreturn_t tsi108_irq(int irq, void *dev_id)
1022{
1023 struct net_device *dev = dev_id;
1024 struct tsi108_prv_data *data = netdev_priv(dev);
1025 u32 stat = TSI_READ(TSI108_EC_INTSTAT);
1026
1027 if (!(stat & TSI108_INT_ANY))
1028 return IRQ_NONE; /* Not our interrupt */
1029
1030 stat &= ~TSI_READ(TSI108_EC_INTMASK);
1031
1032 if (stat & (TSI108_INT_TXQUEUE0 | TSI108_INT_TXIDLE |
1033 TSI108_INT_TXERROR))
1034 tsi108_tx_int(dev);
1035 if (stat & (TSI108_INT_RXQUEUE0 | TSI108_INT_RXTHRESH |
1036 TSI108_INT_RXWAIT | TSI108_INT_RXOVERRUN |
1037 TSI108_INT_RXERROR))
1038 tsi108_rx_int(dev);
1039
1040 if (stat & TSI108_INT_SFN) {
1041 if (net_ratelimit())
1042 printk(KERN_DEBUG "%s: SFN error\n", dev->name);
1043 TSI_WRITE(TSI108_EC_INTSTAT, TSI108_INT_SFN);
1044 }
1045
1046 if (stat & TSI108_INT_STATCARRY) {
1047 tsi108_stat_carry(dev);
1048 TSI_WRITE(TSI108_EC_INTSTAT, TSI108_INT_STATCARRY);
1049 }
1050
1051 return IRQ_HANDLED;
1052}
1053
1054static void tsi108_stop_ethernet(struct net_device *dev)
1055{
1056 struct tsi108_prv_data *data = netdev_priv(dev);
1057 int i = 1000;
1058 /* Disable all TX and RX queues ... */
1059 TSI_WRITE(TSI108_EC_TXCTRL, 0);
1060 TSI_WRITE(TSI108_EC_RXCTRL, 0);
1061
1062 /* ...and wait for them to become idle */
1063 while(i--) {
1064 if(!(TSI_READ(TSI108_EC_TXSTAT) & TSI108_EC_TXSTAT_ACTIVE))
1065 break;
1066 udelay(10);
1067 }
1068 i = 1000;
1069 while(i--){
1070 if(!(TSI_READ(TSI108_EC_RXSTAT) & TSI108_EC_RXSTAT_ACTIVE))
1071 return;
1072 udelay(10);
1073 }
1074 printk(KERN_ERR "%s function time out \n", __FUNCTION__);
1075}
1076
1077static void tsi108_reset_ether(struct tsi108_prv_data * data)
1078{
1079 TSI_WRITE(TSI108_MAC_CFG1, TSI108_MAC_CFG1_SOFTRST);
1080 udelay(100);
1081 TSI_WRITE(TSI108_MAC_CFG1, 0);
1082
1083 TSI_WRITE(TSI108_EC_PORTCTRL, TSI108_EC_PORTCTRL_STATRST);
1084 udelay(100);
1085 TSI_WRITE(TSI108_EC_PORTCTRL,
1086 TSI_READ(TSI108_EC_PORTCTRL) &
1087 ~TSI108_EC_PORTCTRL_STATRST);
1088
1089 TSI_WRITE(TSI108_EC_TXCFG, TSI108_EC_TXCFG_RST);
1090 udelay(100);
1091 TSI_WRITE(TSI108_EC_TXCFG,
1092 TSI_READ(TSI108_EC_TXCFG) &
1093 ~TSI108_EC_TXCFG_RST);
1094
1095 TSI_WRITE(TSI108_EC_RXCFG, TSI108_EC_RXCFG_RST);
1096 udelay(100);
1097 TSI_WRITE(TSI108_EC_RXCFG,
1098 TSI_READ(TSI108_EC_RXCFG) &
1099 ~TSI108_EC_RXCFG_RST);
1100
1101 TSI_WRITE(TSI108_MAC_MII_MGMT_CFG,
1102 TSI_READ(TSI108_MAC_MII_MGMT_CFG) |
1103 TSI108_MAC_MII_MGMT_RST);
1104 udelay(100);
1105 TSI_WRITE(TSI108_MAC_MII_MGMT_CFG,
1106 (TSI_READ(TSI108_MAC_MII_MGMT_CFG) &
1107 ~(TSI108_MAC_MII_MGMT_RST |
1108 TSI108_MAC_MII_MGMT_CLK)) | 0x07);
1109}
1110
1111static int tsi108_get_mac(struct net_device *dev)
1112{
1113 struct tsi108_prv_data *data = netdev_priv(dev);
1114 u32 word1 = TSI_READ(TSI108_MAC_ADDR1);
1115 u32 word2 = TSI_READ(TSI108_MAC_ADDR2);
1116
1117 /* Note that the octets are reversed from what the manual says,
1118 * producing an even weirder ordering...
1119 */
1120 if (word2 == 0 && word1 == 0) {
1121 dev->dev_addr[0] = 0x00;
1122 dev->dev_addr[1] = 0x06;
1123 dev->dev_addr[2] = 0xd2;
1124 dev->dev_addr[3] = 0x00;
1125 dev->dev_addr[4] = 0x00;
1126 if (0x8 == data->phy)
1127 dev->dev_addr[5] = 0x01;
1128 else
1129 dev->dev_addr[5] = 0x02;
1130
1131 word2 = (dev->dev_addr[0] << 16) | (dev->dev_addr[1] << 24);
1132
1133 word1 = (dev->dev_addr[2] << 0) | (dev->dev_addr[3] << 8) |
1134 (dev->dev_addr[4] << 16) | (dev->dev_addr[5] << 24);
1135
1136 TSI_WRITE(TSI108_MAC_ADDR1, word1);
1137 TSI_WRITE(TSI108_MAC_ADDR2, word2);
1138 } else {
1139 dev->dev_addr[0] = (word2 >> 16) & 0xff;
1140 dev->dev_addr[1] = (word2 >> 24) & 0xff;
1141 dev->dev_addr[2] = (word1 >> 0) & 0xff;
1142 dev->dev_addr[3] = (word1 >> 8) & 0xff;
1143 dev->dev_addr[4] = (word1 >> 16) & 0xff;
1144 dev->dev_addr[5] = (word1 >> 24) & 0xff;
1145 }
1146
1147 if (!is_valid_ether_addr(dev->dev_addr)) {
1148 printk("KERN_ERR: word1: %08x, word2: %08x\n", word1, word2);
1149 return -EINVAL;
1150 }
1151
1152 return 0;
1153}
1154
1155static int tsi108_set_mac(struct net_device *dev, void *addr)
1156{
1157 struct tsi108_prv_data *data = netdev_priv(dev);
1158 u32 word1, word2;
1159 int i;
1160
1161 if (!is_valid_ether_addr(addr))
1162 return -EINVAL;
1163
1164 for (i = 0; i < 6; i++)
1165 /* +2 is for the offset of the HW addr type */
1166 dev->dev_addr[i] = ((unsigned char *)addr)[i + 2];
1167
1168 word2 = (dev->dev_addr[0] << 16) | (dev->dev_addr[1] << 24);
1169
1170 word1 = (dev->dev_addr[2] << 0) | (dev->dev_addr[3] << 8) |
1171 (dev->dev_addr[4] << 16) | (dev->dev_addr[5] << 24);
1172
1173 spin_lock_irq(&data->misclock);
1174 TSI_WRITE(TSI108_MAC_ADDR1, word1);
1175 TSI_WRITE(TSI108_MAC_ADDR2, word2);
1176 spin_lock(&data->txlock);
1177
1178 if (data->txfree && data->link_up)
1179 netif_wake_queue(dev);
1180
1181 spin_unlock(&data->txlock);
1182 spin_unlock_irq(&data->misclock);
1183 return 0;
1184}
1185
1186/* Protected by dev->xmit_lock. */
1187static void tsi108_set_rx_mode(struct net_device *dev)
1188{
1189 struct tsi108_prv_data *data = netdev_priv(dev);
1190 u32 rxcfg = TSI_READ(TSI108_EC_RXCFG);
1191
1192 if (dev->flags & IFF_PROMISC) {
1193 rxcfg &= ~(TSI108_EC_RXCFG_UC_HASH | TSI108_EC_RXCFG_MC_HASH);
1194 rxcfg |= TSI108_EC_RXCFG_UFE | TSI108_EC_RXCFG_MFE;
1195 goto out;
1196 }
1197
1198 rxcfg &= ~(TSI108_EC_RXCFG_UFE | TSI108_EC_RXCFG_MFE);
1199
1200 if (dev->flags & IFF_ALLMULTI || dev->mc_count) {
1201 int i;
1202 struct dev_mc_list *mc = dev->mc_list;
1203 rxcfg |= TSI108_EC_RXCFG_MFE | TSI108_EC_RXCFG_MC_HASH;
1204
1205 memset(data->mc_hash, 0, sizeof(data->mc_hash));
1206
1207 while (mc) {
1208 u32 hash, crc;
1209
1210 if (mc->dmi_addrlen == 6) {
1211 crc = ether_crc(6, mc->dmi_addr);
1212 hash = crc >> 23;
1213
1214 __set_bit(hash, &data->mc_hash[0]);
1215 } else {
1216 printk(KERN_ERR
1217 "%s: got multicast address of length %d "
1218 "instead of 6.\n", dev->name,
1219 mc->dmi_addrlen);
1220 }
1221
1222 mc = mc->next;
1223 }
1224
1225 TSI_WRITE(TSI108_EC_HASHADDR,
1226 TSI108_EC_HASHADDR_AUTOINC |
1227 TSI108_EC_HASHADDR_MCAST);
1228
1229 for (i = 0; i < 16; i++) {
1230 /* The manual says that the hardware may drop
1231 * back-to-back writes to the data register.
1232 */
1233 udelay(1);
1234 TSI_WRITE(TSI108_EC_HASHDATA,
1235 data->mc_hash[i]);
1236 }
1237 }
1238
1239 out:
1240 TSI_WRITE(TSI108_EC_RXCFG, rxcfg);
1241}
1242
1243static void tsi108_init_phy(struct net_device *dev)
1244{
1245 struct tsi108_prv_data *data = netdev_priv(dev);
1246 u32 i = 0;
1247 u16 phyval = 0;
1248 unsigned long flags;
1249
1250 spin_lock_irqsave(&phy_lock, flags);
1251
1252 tsi108_write_mii(data, MII_BMCR, BMCR_RESET);
1253 while (i--){
1254 if(!(tsi108_read_mii(data, MII_BMCR) & BMCR_RESET))
1255 break;
1256 udelay(10);
1257 }
1258 if (i == 0)
1259 printk(KERN_ERR "%s function time out \n", __FUNCTION__);
1260
1261#if (TSI108_PHY_TYPE == PHY_BCM54XX) /* Broadcom BCM54xx PHY */
1262 tsi108_write_mii(data, 0x09, 0x0300);
1263 tsi108_write_mii(data, 0x10, 0x1020);
1264 tsi108_write_mii(data, 0x1c, 0x8c00);
1265#endif
1266
1267 tsi108_write_mii(data,
1268 MII_BMCR,
1269 BMCR_ANENABLE | BMCR_ANRESTART);
1270 while (tsi108_read_mii(data, MII_BMCR) & BMCR_ANRESTART)
1271 cpu_relax();
1272
1273 /* Set G/MII mode and receive clock select in TBI control #2. The
1274 * second port won't work if this isn't done, even though we don't
1275 * use TBI mode.
1276 */
1277
1278 tsi108_write_tbi(data, 0x11, 0x30);
1279
1280 /* FIXME: It seems to take more than 2 back-to-back reads to the
1281 * PHY_STAT register before the link up status bit is set.
1282 */
1283
1284 data->link_up = 1;
1285
1286 while (!((phyval = tsi108_read_mii(data, MII_BMSR)) &
1287 BMSR_LSTATUS)) {
1288 if (i++ > (MII_READ_DELAY / 10)) {
1289 data->link_up = 0;
1290 break;
1291 }
1292 spin_unlock_irqrestore(&phy_lock, flags);
1293 msleep(10);
1294 spin_lock_irqsave(&phy_lock, flags);
1295 }
1296
1297 printk(KERN_DEBUG "PHY_STAT reg contains %08x\n", phyval);
1298 data->phy_ok = 1;
1299 data->init_media = 1;
1300 spin_unlock_irqrestore(&phy_lock, flags);
1301}
1302
1303static void tsi108_kill_phy(struct net_device *dev)
1304{
1305 struct tsi108_prv_data *data = netdev_priv(dev);
1306 unsigned long flags;
1307
1308 spin_lock_irqsave(&phy_lock, flags);
1309 tsi108_write_mii(data, MII_BMCR, BMCR_PDOWN);
1310 data->phy_ok = 0;
1311 spin_unlock_irqrestore(&phy_lock, flags);
1312}
1313
1314static int tsi108_open(struct net_device *dev)
1315{
1316 int i;
1317 struct tsi108_prv_data *data = netdev_priv(dev);
1318 unsigned int rxring_size = TSI108_RXRING_LEN * sizeof(rx_desc);
1319 unsigned int txring_size = TSI108_TXRING_LEN * sizeof(tx_desc);
1320
1321 i = request_irq(data->irq_num, tsi108_irq, 0, dev->name, dev);
1322 if (i != 0) {
1323 printk(KERN_ERR "tsi108_eth%d: Could not allocate IRQ%d.\n",
1324 data->id, data->irq_num);
1325 return i;
1326 } else {
1327 dev->irq = data->irq_num;
1328 printk(KERN_NOTICE
1329 "tsi108_open : Port %d Assigned IRQ %d to %s\n",
1330 data->id, dev->irq, dev->name);
1331 }
1332
1333 data->rxring = dma_alloc_coherent(NULL, rxring_size,
1334 &data->rxdma, GFP_KERNEL);
1335
1336 if (!data->rxring) {
1337 printk(KERN_DEBUG
1338 "TSI108_ETH: failed to allocate memory for rxring!\n");
1339 return -ENOMEM;
1340 } else {
1341 memset(data->rxring, 0, rxring_size);
1342 }
1343
1344 data->txring = dma_alloc_coherent(NULL, txring_size,
1345 &data->txdma, GFP_KERNEL);
1346
1347 if (!data->txring) {
1348 printk(KERN_DEBUG
1349 "TSI108_ETH: failed to allocate memory for txring!\n");
1350 pci_free_consistent(0, rxring_size, data->rxring, data->rxdma);
1351 return -ENOMEM;
1352 } else {
1353 memset(data->txring, 0, txring_size);
1354 }
1355
1356 for (i = 0; i < TSI108_RXRING_LEN; i++) {
1357 data->rxring[i].next0 = data->rxdma + (i + 1) * sizeof(rx_desc);
1358 data->rxring[i].blen = TSI108_RXBUF_SIZE;
1359 data->rxring[i].vlan = 0;
1360 }
1361
1362 data->rxring[TSI108_RXRING_LEN - 1].next0 = data->rxdma;
1363
1364 data->rxtail = 0;
1365 data->rxhead = 0;
1366
1367 for (i = 0; i < TSI108_RXRING_LEN; i++) {
1368 struct sk_buff *skb = dev_alloc_skb(TSI108_RXBUF_SIZE + NET_IP_ALIGN);
1369
1370 if (!skb) {
1371 /* Bah. No memory for now, but maybe we'll get
1372 * some more later.
1373 * For now, we'll live with the smaller ring.
1374 */
1375 printk(KERN_WARNING
1376 "%s: Could only allocate %d receive skb(s).\n",
1377 dev->name, i);
1378 data->rxhead = i;
1379 break;
1380 }
1381
1382 data->rxskbs[i] = skb;
1383 /* Align the payload on a 4-byte boundary */
1384 skb_reserve(skb, 2);
1385 data->rxskbs[i] = skb;
1386 data->rxring[i].buf0 = virt_to_phys(data->rxskbs[i]->data);
1387 data->rxring[i].misc = TSI108_RX_OWN | TSI108_RX_INT;
1388 }
1389
1390 data->rxfree = i;
1391 TSI_WRITE(TSI108_EC_RXQ_PTRLOW, data->rxdma);
1392
1393 for (i = 0; i < TSI108_TXRING_LEN; i++) {
1394 data->txring[i].next0 = data->txdma + (i + 1) * sizeof(tx_desc);
1395 data->txring[i].misc = 0;
1396 }
1397
1398 data->txring[TSI108_TXRING_LEN - 1].next0 = data->txdma;
1399 data->txtail = 0;
1400 data->txhead = 0;
1401 data->txfree = TSI108_TXRING_LEN;
1402 TSI_WRITE(TSI108_EC_TXQ_PTRLOW, data->txdma);
1403 tsi108_init_phy(dev);
1404
1405 setup_timer(&data->timer, tsi108_timed_checker, (unsigned long)dev);
1406 mod_timer(&data->timer, jiffies + 1);
1407
1408 tsi108_restart_rx(data, dev);
1409
1410 TSI_WRITE(TSI108_EC_INTSTAT, ~0);
1411
1412 TSI_WRITE(TSI108_EC_INTMASK,
1413 ~(TSI108_INT_TXQUEUE0 | TSI108_INT_RXERROR |
1414 TSI108_INT_RXTHRESH | TSI108_INT_RXQUEUE0 |
1415 TSI108_INT_RXOVERRUN | TSI108_INT_RXWAIT |
1416 TSI108_INT_SFN | TSI108_INT_STATCARRY));
1417
1418 TSI_WRITE(TSI108_MAC_CFG1,
1419 TSI108_MAC_CFG1_RXEN | TSI108_MAC_CFG1_TXEN);
1420 netif_start_queue(dev);
1421 return 0;
1422}
1423
1424static int tsi108_close(struct net_device *dev)
1425{
1426 struct tsi108_prv_data *data = netdev_priv(dev);
1427
1428 netif_stop_queue(dev);
1429
1430 del_timer_sync(&data->timer);
1431
1432 tsi108_stop_ethernet(dev);
1433 tsi108_kill_phy(dev);
1434 TSI_WRITE(TSI108_EC_INTMASK, ~0);
1435 TSI_WRITE(TSI108_MAC_CFG1, 0);
1436
1437 /* Check for any pending TX packets, and drop them. */
1438
1439 while (!data->txfree || data->txhead != data->txtail) {
1440 int tx = data->txtail;
1441 struct sk_buff *skb;
1442 skb = data->txskbs[tx];
1443 data->txtail = (data->txtail + 1) % TSI108_TXRING_LEN;
1444 data->txfree++;
1445 dev_kfree_skb(skb);
1446 }
1447
1448 synchronize_irq(data->irq_num);
1449 free_irq(data->irq_num, dev);
1450
1451 /* Discard the RX ring. */
1452
1453 while (data->rxfree) {
1454 int rx = data->rxtail;
1455 struct sk_buff *skb;
1456
1457 skb = data->rxskbs[rx];
1458 data->rxtail = (data->rxtail + 1) % TSI108_RXRING_LEN;
1459 data->rxfree--;
1460 dev_kfree_skb(skb);
1461 }
1462
1463 dma_free_coherent(0,
1464 TSI108_RXRING_LEN * sizeof(rx_desc),
1465 data->rxring, data->rxdma);
1466 dma_free_coherent(0,
1467 TSI108_TXRING_LEN * sizeof(tx_desc),
1468 data->txring, data->txdma);
1469
1470 return 0;
1471}
1472
1473static void tsi108_init_mac(struct net_device *dev)
1474{
1475 struct tsi108_prv_data *data = netdev_priv(dev);
1476
1477 TSI_WRITE(TSI108_MAC_CFG2, TSI108_MAC_CFG2_DFLT_PREAMBLE |
1478 TSI108_MAC_CFG2_PADCRC);
1479
1480 TSI_WRITE(TSI108_EC_TXTHRESH,
1481 (192 << TSI108_EC_TXTHRESH_STARTFILL) |
1482 (192 << TSI108_EC_TXTHRESH_STOPFILL));
1483
1484 TSI_WRITE(TSI108_STAT_CARRYMASK1,
1485 ~(TSI108_STAT_CARRY1_RXBYTES |
1486 TSI108_STAT_CARRY1_RXPKTS |
1487 TSI108_STAT_CARRY1_RXFCS |
1488 TSI108_STAT_CARRY1_RXMCAST |
1489 TSI108_STAT_CARRY1_RXALIGN |
1490 TSI108_STAT_CARRY1_RXLENGTH |
1491 TSI108_STAT_CARRY1_RXRUNT |
1492 TSI108_STAT_CARRY1_RXJUMBO |
1493 TSI108_STAT_CARRY1_RXFRAG |
1494 TSI108_STAT_CARRY1_RXJABBER |
1495 TSI108_STAT_CARRY1_RXDROP));
1496
1497 TSI_WRITE(TSI108_STAT_CARRYMASK2,
1498 ~(TSI108_STAT_CARRY2_TXBYTES |
1499 TSI108_STAT_CARRY2_TXPKTS |
1500 TSI108_STAT_CARRY2_TXEXDEF |
1501 TSI108_STAT_CARRY2_TXEXCOL |
1502 TSI108_STAT_CARRY2_TXTCOL |
1503 TSI108_STAT_CARRY2_TXPAUSE));
1504
1505 TSI_WRITE(TSI108_EC_PORTCTRL, TSI108_EC_PORTCTRL_STATEN);
1506 TSI_WRITE(TSI108_MAC_CFG1, 0);
1507
1508 TSI_WRITE(TSI108_EC_RXCFG,
1509 TSI108_EC_RXCFG_SE | TSI108_EC_RXCFG_BFE);
1510
1511 TSI_WRITE(TSI108_EC_TXQ_CFG, TSI108_EC_TXQ_CFG_DESC_INT |
1512 TSI108_EC_TXQ_CFG_EOQ_OWN_INT |
1513 TSI108_EC_TXQ_CFG_WSWP | (TSI108_PBM_PORT <<
1514 TSI108_EC_TXQ_CFG_SFNPORT));
1515
1516 TSI_WRITE(TSI108_EC_RXQ_CFG, TSI108_EC_RXQ_CFG_DESC_INT |
1517 TSI108_EC_RXQ_CFG_EOQ_OWN_INT |
1518 TSI108_EC_RXQ_CFG_WSWP | (TSI108_PBM_PORT <<
1519 TSI108_EC_RXQ_CFG_SFNPORT));
1520
1521 TSI_WRITE(TSI108_EC_TXQ_BUFCFG,
1522 TSI108_EC_TXQ_BUFCFG_BURST256 |
1523 TSI108_EC_TXQ_BUFCFG_BSWP | (TSI108_PBM_PORT <<
1524 TSI108_EC_TXQ_BUFCFG_SFNPORT));
1525
1526 TSI_WRITE(TSI108_EC_RXQ_BUFCFG,
1527 TSI108_EC_RXQ_BUFCFG_BURST256 |
1528 TSI108_EC_RXQ_BUFCFG_BSWP | (TSI108_PBM_PORT <<
1529 TSI108_EC_RXQ_BUFCFG_SFNPORT));
1530
1531 TSI_WRITE(TSI108_EC_INTMASK, ~0);
1532}
1533
1534static int tsi108_do_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
1535{
1536 struct tsi108_prv_data *data = netdev_priv(dev);
1537 return generic_mii_ioctl(&data->mii_if, if_mii(rq), cmd, NULL);
1538}
1539
1540static int
1541tsi108_init_one(struct platform_device *pdev)
1542{
1543 struct net_device *dev = NULL;
1544 struct tsi108_prv_data *data = NULL;
1545 hw_info *einfo;
1546 int err = 0;
1547
1548 einfo = pdev->dev.platform_data;
1549
1550 if (NULL == einfo) {
1551 printk(KERN_ERR "tsi-eth %d: Missing additional data!\n",
1552 pdev->id);
1553 return -ENODEV;
1554 }
1555
1556 /* Create an ethernet device instance */
1557
1558 dev = alloc_etherdev(sizeof(struct tsi108_prv_data));
1559 if (!dev) {
1560 printk("tsi108_eth: Could not allocate a device structure\n");
1561 return -ENOMEM;
1562 }
1563
1564 printk("tsi108_eth%d: probe...\n", pdev->id);
1565 data = netdev_priv(dev);
1566
1567 pr_debug("tsi108_eth%d:regs:phyresgs:phy:irq_num=0x%x:0x%x:0x%x:0x%x\n",
1568 pdev->id, einfo->regs, einfo->phyregs,
1569 einfo->phy, einfo->irq_num);
1570
1571 data->regs = ioremap(einfo->regs, 0x400);
1572 if (NULL == data->regs) {
1573 err = -ENOMEM;
1574 goto regs_fail;
1575 }
1576
1577 data->phyregs = ioremap(einfo->phyregs, 0x400);
1578 if (NULL == data->phyregs) {
1579 err = -ENOMEM;
1580 goto regs_fail;
1581 }
1582/* MII setup */
1583 data->mii_if.dev = dev;
1584 data->mii_if.mdio_read = tsi108_mdio_read;
1585 data->mii_if.mdio_write = tsi108_mdio_write;
1586 data->mii_if.phy_id = einfo->phy;
1587 data->mii_if.phy_id_mask = 0x1f;
1588 data->mii_if.reg_num_mask = 0x1f;
1589 data->mii_if.supports_gmii = mii_check_gmii_support(&data->mii_if);
1590
1591 data->phy = einfo->phy;
1592 data->irq_num = einfo->irq_num;
1593 data->id = pdev->id;
1594 dev->open = tsi108_open;
1595 dev->stop = tsi108_close;
1596 dev->hard_start_xmit = tsi108_send_packet;
1597 dev->set_mac_address = tsi108_set_mac;
1598 dev->set_multicast_list = tsi108_set_rx_mode;
1599 dev->get_stats = tsi108_get_stats;
1600 dev->poll = tsi108_poll;
1601 dev->do_ioctl = tsi108_do_ioctl;
1602 dev->weight = 64; /* 64 is more suitable for GigE interface - klai */
1603
1604 /* Apparently, the Linux networking code won't use scatter-gather
1605 * if the hardware doesn't do checksums. However, it's faster
1606 * to checksum in place and use SG, as (among other reasons)
1607 * the cache won't be dirtied (which then has to be flushed
1608 * before DMA). The checksumming is done by the driver (via
1609 * a new function skb_csum_dev() in net/core/skbuff.c).
1610 */
1611
1612 dev->features = NETIF_F_HIGHDMA;
1613 SET_MODULE_OWNER(dev);
1614
1615 spin_lock_init(&data->txlock);
1616 spin_lock_init(&data->misclock);
1617
1618 tsi108_reset_ether(data);
1619 tsi108_kill_phy(dev);
1620
1621 if ((err = tsi108_get_mac(dev)) != 0) {
1622 printk(KERN_ERR "%s: Invalid MAC address. Please correct.\n",
1623 dev->name);
1624 goto register_fail;
1625 }
1626
1627 tsi108_init_mac(dev);
1628 err = register_netdev(dev);
1629 if (err) {
1630 printk(KERN_ERR "%s: Cannot register net device, aborting.\n",
1631 dev->name);
1632 goto register_fail;
1633 }
1634
1635 printk(KERN_INFO "%s: Tsi108 Gigabit Ethernet, MAC: "
1636 "%02x:%02x:%02x:%02x:%02x:%02x\n", dev->name,
1637 dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
1638 dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5]);
1639#ifdef DEBUG
1640 data->msg_enable = DEBUG;
1641 dump_eth_one(dev);
1642#endif
1643
1644 return 0;
1645
1646register_fail:
1647 iounmap(data->regs);
1648 iounmap(data->phyregs);
1649
1650regs_fail:
1651 free_netdev(dev);
1652 return err;
1653}
1654
1655/* There's no way to either get interrupts from the PHY when
1656 * something changes, or to have the Tsi108 automatically communicate
1657 * with the PHY to reconfigure itself.
1658 *
1659 * Thus, we have to do it using a timer.
1660 */
1661
1662static void tsi108_timed_checker(unsigned long dev_ptr)
1663{
1664 struct net_device *dev = (struct net_device *)dev_ptr;
1665 struct tsi108_prv_data *data = netdev_priv(dev);
1666
1667 tsi108_check_phy(dev);
1668 tsi108_check_rxring(dev);
1669 mod_timer(&data->timer, jiffies + CHECK_PHY_INTERVAL);
1670}
1671
1672static int tsi108_ether_init(void)
1673{
1674 int ret;
1675 ret = platform_driver_register (&tsi_eth_driver);
1676 if (ret < 0){
1677 printk("tsi108_ether_init: error initializing ethernet "
1678 "device\n");
1679 return ret;
1680 }
1681 return 0;
1682}
1683
1684static int tsi108_ether_remove(struct platform_device *pdev)
1685{
1686 struct net_device *dev = platform_get_drvdata(pdev);
1687 struct tsi108_prv_data *priv = netdev_priv(dev);
1688
1689 unregister_netdev(dev);
1690 tsi108_stop_ethernet(dev);
1691 platform_set_drvdata(pdev, NULL);
1692 iounmap(priv->regs);
1693 iounmap(priv->phyregs);
1694 free_netdev(dev);
1695
1696 return 0;
1697}
1698static void tsi108_ether_exit(void)
1699{
1700 platform_driver_unregister(&tsi_eth_driver);
1701}
1702
1703module_init(tsi108_ether_init);
1704module_exit(tsi108_ether_exit);
1705
1706MODULE_AUTHOR("Tundra Semiconductor Corporation");
1707MODULE_DESCRIPTION("Tsi108 Gigabit Ethernet driver");
1708MODULE_LICENSE("GPL");
diff --git a/drivers/net/tsi108_eth.h b/drivers/net/tsi108_eth.h
new file mode 100644
index 000000000000..77a769df228a
--- /dev/null
+++ b/drivers/net/tsi108_eth.h
@@ -0,0 +1,365 @@
1/*
2 * (C) Copyright 2005 Tundra Semiconductor Corp.
3 * Kong Lai, <kong.lai@tundra.com).
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 */
23
24/*
25 * net/tsi108_eth.h - definitions for Tsi108 GIGE network controller.
26 */
27
28#ifndef __TSI108_ETH_H
29#define __TSI108_ETH_H
30
31#include <linux/types.h>
32
33#define TSI_WRITE(offset, val) \
34 out_be32((data->regs + (offset)), val)
35
36#define TSI_READ(offset) \
37 in_be32((data->regs + (offset)))
38
39#define TSI_WRITE_PHY(offset, val) \
40 out_be32((data->phyregs + (offset)), val)
41
42#define TSI_READ_PHY(offset) \
43 in_be32((data->phyregs + (offset)))
44
45/*
46 * PHY Configuration Options
47 *
48 * NOTE: Enable set of definitions corresponding to your board type
49 */
50#define PHY_MV88E 1 /* Marvel 88Exxxx PHY */
51#define PHY_BCM54XX 2 /* Broardcom BCM54xx PHY */
52#define TSI108_PHY_TYPE PHY_MV88E
53
54/*
55 * TSI108 GIGE port registers
56 */
57
58#define TSI108_ETH_PORT_NUM 2
59#define TSI108_PBM_PORT 2
60#define TSI108_SDRAM_PORT 4
61
62#define TSI108_MAC_CFG1 (0x000)
63#define TSI108_MAC_CFG1_SOFTRST (1 << 31)
64#define TSI108_MAC_CFG1_LOOPBACK (1 << 8)
65#define TSI108_MAC_CFG1_RXEN (1 << 2)
66#define TSI108_MAC_CFG1_TXEN (1 << 0)
67
68#define TSI108_MAC_CFG2 (0x004)
69#define TSI108_MAC_CFG2_DFLT_PREAMBLE (7 << 12)
70#define TSI108_MAC_CFG2_IFACE_MASK (3 << 8)
71#define TSI108_MAC_CFG2_NOGIG (1 << 8)
72#define TSI108_MAC_CFG2_GIG (2 << 8)
73#define TSI108_MAC_CFG2_PADCRC (1 << 2)
74#define TSI108_MAC_CFG2_FULLDUPLEX (1 << 0)
75
76#define TSI108_MAC_MII_MGMT_CFG (0x020)
77#define TSI108_MAC_MII_MGMT_CLK (7 << 0)
78#define TSI108_MAC_MII_MGMT_RST (1 << 31)
79
80#define TSI108_MAC_MII_CMD (0x024)
81#define TSI108_MAC_MII_CMD_READ (1 << 0)
82
83#define TSI108_MAC_MII_ADDR (0x028)
84#define TSI108_MAC_MII_ADDR_REG 0
85#define TSI108_MAC_MII_ADDR_PHY 8
86
87#define TSI108_MAC_MII_DATAOUT (0x02c)
88#define TSI108_MAC_MII_DATAIN (0x030)
89
90#define TSI108_MAC_MII_IND (0x034)
91#define TSI108_MAC_MII_IND_NOTVALID (1 << 2)
92#define TSI108_MAC_MII_IND_SCANNING (1 << 1)
93#define TSI108_MAC_MII_IND_BUSY (1 << 0)
94
95#define TSI108_MAC_IFCTRL (0x038)
96#define TSI108_MAC_IFCTRL_PHYMODE (1 << 24)
97
98#define TSI108_MAC_ADDR1 (0x040)
99#define TSI108_MAC_ADDR2 (0x044)
100
101#define TSI108_STAT_RXBYTES (0x06c)
102#define TSI108_STAT_RXBYTES_CARRY (1 << 24)
103
104#define TSI108_STAT_RXPKTS (0x070)
105#define TSI108_STAT_RXPKTS_CARRY (1 << 18)
106
107#define TSI108_STAT_RXFCS (0x074)
108#define TSI108_STAT_RXFCS_CARRY (1 << 12)
109
110#define TSI108_STAT_RXMCAST (0x078)
111#define TSI108_STAT_RXMCAST_CARRY (1 << 18)
112
113#define TSI108_STAT_RXALIGN (0x08c)
114#define TSI108_STAT_RXALIGN_CARRY (1 << 12)
115
116#define TSI108_STAT_RXLENGTH (0x090)
117#define TSI108_STAT_RXLENGTH_CARRY (1 << 12)
118
119#define TSI108_STAT_RXRUNT (0x09c)
120#define TSI108_STAT_RXRUNT_CARRY (1 << 12)
121
122#define TSI108_STAT_RXJUMBO (0x0a0)
123#define TSI108_STAT_RXJUMBO_CARRY (1 << 12)
124
125#define TSI108_STAT_RXFRAG (0x0a4)
126#define TSI108_STAT_RXFRAG_CARRY (1 << 12)
127
128#define TSI108_STAT_RXJABBER (0x0a8)
129#define TSI108_STAT_RXJABBER_CARRY (1 << 12)
130
131#define TSI108_STAT_RXDROP (0x0ac)
132#define TSI108_STAT_RXDROP_CARRY (1 << 12)
133
134#define TSI108_STAT_TXBYTES (0x0b0)
135#define TSI108_STAT_TXBYTES_CARRY (1 << 24)
136
137#define TSI108_STAT_TXPKTS (0x0b4)
138#define TSI108_STAT_TXPKTS_CARRY (1 << 18)
139
140#define TSI108_STAT_TXEXDEF (0x0c8)
141#define TSI108_STAT_TXEXDEF_CARRY (1 << 12)
142
143#define TSI108_STAT_TXEXCOL (0x0d8)
144#define TSI108_STAT_TXEXCOL_CARRY (1 << 12)
145
146#define TSI108_STAT_TXTCOL (0x0dc)
147#define TSI108_STAT_TXTCOL_CARRY (1 << 13)
148
149#define TSI108_STAT_TXPAUSEDROP (0x0e4)
150#define TSI108_STAT_TXPAUSEDROP_CARRY (1 << 12)
151
152#define TSI108_STAT_CARRY1 (0x100)
153#define TSI108_STAT_CARRY1_RXBYTES (1 << 16)
154#define TSI108_STAT_CARRY1_RXPKTS (1 << 15)
155#define TSI108_STAT_CARRY1_RXFCS (1 << 14)
156#define TSI108_STAT_CARRY1_RXMCAST (1 << 13)
157#define TSI108_STAT_CARRY1_RXALIGN (1 << 8)
158#define TSI108_STAT_CARRY1_RXLENGTH (1 << 7)
159#define TSI108_STAT_CARRY1_RXRUNT (1 << 4)
160#define TSI108_STAT_CARRY1_RXJUMBO (1 << 3)
161#define TSI108_STAT_CARRY1_RXFRAG (1 << 2)
162#define TSI108_STAT_CARRY1_RXJABBER (1 << 1)
163#define TSI108_STAT_CARRY1_RXDROP (1 << 0)
164
165#define TSI108_STAT_CARRY2 (0x104)
166#define TSI108_STAT_CARRY2_TXBYTES (1 << 13)
167#define TSI108_STAT_CARRY2_TXPKTS (1 << 12)
168#define TSI108_STAT_CARRY2_TXEXDEF (1 << 7)
169#define TSI108_STAT_CARRY2_TXEXCOL (1 << 3)
170#define TSI108_STAT_CARRY2_TXTCOL (1 << 2)
171#define TSI108_STAT_CARRY2_TXPAUSE (1 << 0)
172
173#define TSI108_STAT_CARRYMASK1 (0x108)
174#define TSI108_STAT_CARRYMASK2 (0x10c)
175
176#define TSI108_EC_PORTCTRL (0x200)
177#define TSI108_EC_PORTCTRL_STATRST (1 << 31)
178#define TSI108_EC_PORTCTRL_STATEN (1 << 28)
179#define TSI108_EC_PORTCTRL_NOGIG (1 << 18)
180#define TSI108_EC_PORTCTRL_HALFDUPLEX (1 << 16)
181
182#define TSI108_EC_INTSTAT (0x204)
183#define TSI108_EC_INTMASK (0x208)
184
185#define TSI108_INT_ANY (1 << 31)
186#define TSI108_INT_SFN (1 << 30)
187#define TSI108_INT_RXIDLE (1 << 29)
188#define TSI108_INT_RXABORT (1 << 28)
189#define TSI108_INT_RXERROR (1 << 27)
190#define TSI108_INT_RXOVERRUN (1 << 26)
191#define TSI108_INT_RXTHRESH (1 << 25)
192#define TSI108_INT_RXWAIT (1 << 24)
193#define TSI108_INT_RXQUEUE0 (1 << 16)
194#define TSI108_INT_STATCARRY (1 << 15)
195#define TSI108_INT_TXIDLE (1 << 13)
196#define TSI108_INT_TXABORT (1 << 12)
197#define TSI108_INT_TXERROR (1 << 11)
198#define TSI108_INT_TXUNDERRUN (1 << 10)
199#define TSI108_INT_TXTHRESH (1 << 9)
200#define TSI108_INT_TXWAIT (1 << 8)
201#define TSI108_INT_TXQUEUE0 (1 << 0)
202
203#define TSI108_EC_TXCFG (0x220)
204#define TSI108_EC_TXCFG_RST (1 << 31)
205
206#define TSI108_EC_TXCTRL (0x224)
207#define TSI108_EC_TXCTRL_IDLEINT (1 << 31)
208#define TSI108_EC_TXCTRL_ABORT (1 << 30)
209#define TSI108_EC_TXCTRL_GO (1 << 15)
210#define TSI108_EC_TXCTRL_QUEUE0 (1 << 0)
211
212#define TSI108_EC_TXSTAT (0x228)
213#define TSI108_EC_TXSTAT_ACTIVE (1 << 15)
214#define TSI108_EC_TXSTAT_QUEUE0 (1 << 0)
215
216#define TSI108_EC_TXESTAT (0x22c)
217#define TSI108_EC_TXESTAT_Q0_ERR (1 << 24)
218#define TSI108_EC_TXESTAT_Q0_DESCINT (1 << 16)
219#define TSI108_EC_TXESTAT_Q0_EOF (1 << 8)
220#define TSI108_EC_TXESTAT_Q0_EOQ (1 << 0)
221
222#define TSI108_EC_TXERR (0x278)
223
224#define TSI108_EC_TXQ_CFG (0x280)
225#define TSI108_EC_TXQ_CFG_DESC_INT (1 << 20)
226#define TSI108_EC_TXQ_CFG_EOQ_OWN_INT (1 << 19)
227#define TSI108_EC_TXQ_CFG_WSWP (1 << 11)
228#define TSI108_EC_TXQ_CFG_BSWP (1 << 10)
229#define TSI108_EC_TXQ_CFG_SFNPORT 0
230
231#define TSI108_EC_TXQ_BUFCFG (0x284)
232#define TSI108_EC_TXQ_BUFCFG_BURST8 (0 << 8)
233#define TSI108_EC_TXQ_BUFCFG_BURST32 (1 << 8)
234#define TSI108_EC_TXQ_BUFCFG_BURST128 (2 << 8)
235#define TSI108_EC_TXQ_BUFCFG_BURST256 (3 << 8)
236#define TSI108_EC_TXQ_BUFCFG_WSWP (1 << 11)
237#define TSI108_EC_TXQ_BUFCFG_BSWP (1 << 10)
238#define TSI108_EC_TXQ_BUFCFG_SFNPORT 0
239
240#define TSI108_EC_TXQ_PTRLOW (0x288)
241
242#define TSI108_EC_TXQ_PTRHIGH (0x28c)
243#define TSI108_EC_TXQ_PTRHIGH_VALID (1 << 31)
244
245#define TSI108_EC_TXTHRESH (0x230)
246#define TSI108_EC_TXTHRESH_STARTFILL 0
247#define TSI108_EC_TXTHRESH_STOPFILL 16
248
249#define TSI108_EC_RXCFG (0x320)
250#define TSI108_EC_RXCFG_RST (1 << 31)
251
252#define TSI108_EC_RXSTAT (0x328)
253#define TSI108_EC_RXSTAT_ACTIVE (1 << 15)
254#define TSI108_EC_RXSTAT_QUEUE0 (1 << 0)
255
256#define TSI108_EC_RXESTAT (0x32c)
257#define TSI108_EC_RXESTAT_Q0_ERR (1 << 24)
258#define TSI108_EC_RXESTAT_Q0_DESCINT (1 << 16)
259#define TSI108_EC_RXESTAT_Q0_EOF (1 << 8)
260#define TSI108_EC_RXESTAT_Q0_EOQ (1 << 0)
261
262#define TSI108_EC_HASHADDR (0x360)
263#define TSI108_EC_HASHADDR_AUTOINC (1 << 31)
264#define TSI108_EC_HASHADDR_DO1STREAD (1 << 30)
265#define TSI108_EC_HASHADDR_UNICAST (0 << 4)
266#define TSI108_EC_HASHADDR_MCAST (1 << 4)
267
268#define TSI108_EC_HASHDATA (0x364)
269
270#define TSI108_EC_RXQ_PTRLOW (0x388)
271
272#define TSI108_EC_RXQ_PTRHIGH (0x38c)
273#define TSI108_EC_RXQ_PTRHIGH_VALID (1 << 31)
274
275/* Station Enable -- accept packets destined for us */
276#define TSI108_EC_RXCFG_SE (1 << 13)
277/* Unicast Frame Enable -- for packets not destined for us */
278#define TSI108_EC_RXCFG_UFE (1 << 12)
279/* Multicast Frame Enable */
280#define TSI108_EC_RXCFG_MFE (1 << 11)
281/* Broadcast Frame Enable */
282#define TSI108_EC_RXCFG_BFE (1 << 10)
283#define TSI108_EC_RXCFG_UC_HASH (1 << 9)
284#define TSI108_EC_RXCFG_MC_HASH (1 << 8)
285
286#define TSI108_EC_RXQ_CFG (0x380)
287#define TSI108_EC_RXQ_CFG_DESC_INT (1 << 20)
288#define TSI108_EC_RXQ_CFG_EOQ_OWN_INT (1 << 19)
289#define TSI108_EC_RXQ_CFG_WSWP (1 << 11)
290#define TSI108_EC_RXQ_CFG_BSWP (1 << 10)
291#define TSI108_EC_RXQ_CFG_SFNPORT 0
292
293#define TSI108_EC_RXQ_BUFCFG (0x384)
294#define TSI108_EC_RXQ_BUFCFG_BURST8 (0 << 8)
295#define TSI108_EC_RXQ_BUFCFG_BURST32 (1 << 8)
296#define TSI108_EC_RXQ_BUFCFG_BURST128 (2 << 8)
297#define TSI108_EC_RXQ_BUFCFG_BURST256 (3 << 8)
298#define TSI108_EC_RXQ_BUFCFG_WSWP (1 << 11)
299#define TSI108_EC_RXQ_BUFCFG_BSWP (1 << 10)
300#define TSI108_EC_RXQ_BUFCFG_SFNPORT 0
301
302#define TSI108_EC_RXCTRL (0x324)
303#define TSI108_EC_RXCTRL_ABORT (1 << 30)
304#define TSI108_EC_RXCTRL_GO (1 << 15)
305#define TSI108_EC_RXCTRL_QUEUE0 (1 << 0)
306
307#define TSI108_EC_RXERR (0x378)
308
309#define TSI108_TX_EOF (1 << 0) /* End of frame; last fragment of packet */
310#define TSI108_TX_SOF (1 << 1) /* Start of frame; first frag. of packet */
311#define TSI108_TX_VLAN (1 << 2) /* Per-frame VLAN: enables VLAN override */
312#define TSI108_TX_HUGE (1 << 3) /* Huge frame enable */
313#define TSI108_TX_PAD (1 << 4) /* Pad the packet if too short */
314#define TSI108_TX_CRC (1 << 5) /* Generate CRC for this packet */
315#define TSI108_TX_INT (1 << 14) /* Generate an IRQ after frag. processed */
316#define TSI108_TX_RETRY (0xf << 16) /* 4 bit field indicating num. of retries */
317#define TSI108_TX_COL (1 << 20) /* Set if a collision occured */
318#define TSI108_TX_LCOL (1 << 24) /* Set if a late collision occured */
319#define TSI108_TX_UNDER (1 << 25) /* Set if a FIFO underrun occured */
320#define TSI108_TX_RLIM (1 << 26) /* Set if the retry limit was reached */
321#define TSI108_TX_OK (1 << 30) /* Set if the frame TX was successful */
322#define TSI108_TX_OWN (1 << 31) /* Set if the device owns the descriptor */
323
324/* Note: the descriptor layouts assume big-endian byte order. */
325typedef struct {
326 u32 buf0;
327 u32 buf1; /* Base address of buffer */
328 u32 next0; /* Address of next descriptor, if any */
329 u32 next1;
330 u16 vlan; /* VLAN, if override enabled for this packet */
331 u16 len; /* Length of buffer in bytes */
332 u32 misc; /* See TSI108_TX_* above */
333 u32 reserved0; /*reserved0 and reserved1 are added to make the desc */
334 u32 reserved1; /* 32-byte aligned */
335} __attribute__ ((aligned(32))) tx_desc;
336
337#define TSI108_RX_EOF (1 << 0) /* End of frame; last fragment of packet */
338#define TSI108_RX_SOF (1 << 1) /* Start of frame; first frag. of packet */
339#define TSI108_RX_VLAN (1 << 2) /* Set on SOF if packet has a VLAN */
340#define TSI108_RX_FTYPE (1 << 3) /* Length/Type field is type, not length */
341#define TSI108_RX_RUNT (1 << 4)/* Packet is less than minimum size */
342#define TSI108_RX_HASH (1 << 7)/* Hash table match */
343#define TSI108_RX_BAD (1 << 8) /* Bad frame */
344#define TSI108_RX_OVER (1 << 9) /* FIFO overrun occured */
345#define TSI108_RX_TRUNC (1 << 11) /* Packet truncated due to excess length */
346#define TSI108_RX_CRC (1 << 12) /* Packet had a CRC error */
347#define TSI108_RX_INT (1 << 13) /* Generate an IRQ after frag. processed */
348#define TSI108_RX_OWN (1 << 15) /* Set if the device owns the descriptor */
349
350#define TSI108_RX_SKB_SIZE 1536 /* The RX skb length */
351
352typedef struct {
353 u32 buf0; /* Base address of buffer */
354 u32 buf1; /* Base address of buffer */
355 u32 next0; /* Address of next descriptor, if any */
356 u32 next1; /* Address of next descriptor, if any */
357 u16 vlan; /* VLAN of received packet, first frag only */
358 u16 len; /* Length of received fragment in bytes */
359 u16 blen; /* Length of buffer in bytes */
360 u16 misc; /* See TSI108_RX_* above */
361 u32 reserved0; /* reserved0 and reserved1 are added to make the desc */
362 u32 reserved1; /* 32-byte aligned */
363} __attribute__ ((aligned(32))) rx_desc;
364
365#endif /* __TSI108_ETH_H */