aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/networking/l2tp.txt169
1 files changed, 169 insertions, 0 deletions
diff --git a/Documentation/networking/l2tp.txt b/Documentation/networking/l2tp.txt
new file mode 100644
index 000000000000..2451f551c505
--- /dev/null
+++ b/Documentation/networking/l2tp.txt
@@ -0,0 +1,169 @@
1This brief document describes how to use the kernel's PPPoL2TP driver
2to provide L2TP functionality. L2TP is a protocol that tunnels one or
3more PPP sessions over a UDP tunnel. It is commonly used for VPNs
4(L2TP/IPSec) and by ISPs to tunnel subscriber PPP sessions over an IP
5network infrastructure.
6
7Design
8======
9
10The PPPoL2TP driver, drivers/net/pppol2tp.c, provides a mechanism by
11which PPP frames carried through an L2TP session are passed through
12the kernel's PPP subsystem. The standard PPP daemon, pppd, handles all
13PPP interaction with the peer. PPP network interfaces are created for
14each local PPP endpoint.
15
16The L2TP protocol http://www.faqs.org/rfcs/rfc2661.html defines L2TP
17control and data frames. L2TP control frames carry messages between
18L2TP clients/servers and are used to setup / teardown tunnels and
19sessions. An L2TP client or server is implemented in userspace and
20will use a regular UDP socket per tunnel. L2TP data frames carry PPP
21frames, which may be PPP control or PPP data. The kernel's PPP
22subsystem arranges for PPP control frames to be delivered to pppd,
23while data frames are forwarded as usual.
24
25Each tunnel and session within a tunnel is assigned a unique tunnel_id
26and session_id. These ids are carried in the L2TP header of every
27control and data packet. The pppol2tp driver uses them to lookup
28internal tunnel and/or session contexts. Zero tunnel / session ids are
29treated specially - zero ids are never assigned to tunnels or sessions
30in the network. In the driver, the tunnel context keeps a pointer to
31the tunnel UDP socket. The session context keeps a pointer to the
32PPPoL2TP socket, as well as other data that lets the driver interface
33to the kernel PPP subsystem.
34
35Note that the pppol2tp kernel driver handles only L2TP data frames;
36L2TP control frames are simply passed up to userspace in the UDP
37tunnel socket. The kernel handles all datapath aspects of the
38protocol, including data packet resequencing (if enabled).
39
40There are a number of requirements on the userspace L2TP daemon in
41order to use the pppol2tp driver.
42
431. Use a UDP socket per tunnel.
44
452. Create a single PPPoL2TP socket per tunnel bound to a special null
46 session id. This is used only for communicating with the driver but
47 must remain open while the tunnel is active. Opening this tunnel
48 management socket causes the driver to mark the tunnel socket as an
49 L2TP UDP encapsulation socket and flags it for use by the
50 referenced tunnel id. This hooks up the UDP receive path via
51 udp_encap_rcv() in net/ipv4/udp.c. PPP data frames are never passed
52 in this special PPPoX socket.
53
543. Create a PPPoL2TP socket per L2TP session. This is typically done
55 by starting pppd with the pppol2tp plugin and appropriate
56 arguments. A PPPoL2TP tunnel management socket (Step 2) must be
57 created before the first PPPoL2TP session socket is created.
58
59When creating PPPoL2TP sockets, the application provides information
60to the driver about the socket in a socket connect() call. Source and
61destination tunnel and session ids are provided, as well as the file
62descriptor of a UDP socket. See struct pppol2tp_addr in
63include/linux/if_ppp.h. Note that zero tunnel / session ids are
64treated specially. When creating the per-tunnel PPPoL2TP management
65socket in Step 2 above, zero source and destination session ids are
66specified, which tells the driver to prepare the supplied UDP file
67descriptor for use as an L2TP tunnel socket.
68
69Userspace may control behavior of the tunnel or session using
70setsockopt and ioctl on the PPPoX socket. The following socket
71options are supported:-
72
73DEBUG - bitmask of debug message categories. See below.
74SENDSEQ - 0 => don't send packets with sequence numbers
75 1 => send packets with sequence numbers
76RECVSEQ - 0 => receive packet sequence numbers are optional
77 1 => drop receive packets without sequence numbers
78LNSMODE - 0 => act as LAC.
79 1 => act as LNS.
80REORDERTO - reorder timeout (in millisecs). If 0, don't try to reorder.
81
82Only the DEBUG option is supported by the special tunnel management
83PPPoX socket.
84
85In addition to the standard PPP ioctls, a PPPIOCGL2TPSTATS is provided
86to retrieve tunnel and session statistics from the kernel using the
87PPPoX socket of the appropriate tunnel or session.
88
89Debugging
90=========
91
92The driver supports a flexible debug scheme where kernel trace
93messages may be optionally enabled per tunnel and per session. Care is
94needed when debugging a live system since the messages are not
95rate-limited and a busy system could be swamped. Userspace uses
96setsockopt on the PPPoX socket to set a debug mask.
97
98The following debug mask bits are available:
99
100PPPOL2TP_MSG_DEBUG verbose debug (if compiled in)
101PPPOL2TP_MSG_CONTROL userspace - kernel interface
102PPPOL2TP_MSG_SEQ sequence numbers handling
103PPPOL2TP_MSG_DATA data packets
104
105Sample Userspace Code
106=====================
107
1081. Create tunnel management PPPoX socket
109
110 kernel_fd = socket(AF_PPPOX, SOCK_DGRAM, PX_PROTO_OL2TP);
111 if (kernel_fd >= 0) {
112 struct sockaddr_pppol2tp sax;
113 struct sockaddr_in const *peer_addr;
114
115 peer_addr = l2tp_tunnel_get_peer_addr(tunnel);
116 memset(&sax, 0, sizeof(sax));
117 sax.sa_family = AF_PPPOX;
118 sax.sa_protocol = PX_PROTO_OL2TP;
119 sax.pppol2tp.fd = udp_fd; /* fd of tunnel UDP socket */
120 sax.pppol2tp.addr.sin_addr.s_addr = peer_addr->sin_addr.s_addr;
121 sax.pppol2tp.addr.sin_port = peer_addr->sin_port;
122 sax.pppol2tp.addr.sin_family = AF_INET;
123 sax.pppol2tp.s_tunnel = tunnel_id;
124 sax.pppol2tp.s_session = 0; /* special case: mgmt socket */
125 sax.pppol2tp.d_tunnel = 0;
126 sax.pppol2tp.d_session = 0; /* special case: mgmt socket */
127
128 if(connect(kernel_fd, (struct sockaddr *)&sax, sizeof(sax) ) < 0 ) {
129 perror("connect failed");
130 result = -errno;
131 goto err;
132 }
133 }
134
1352. Create session PPPoX data socket
136
137 struct sockaddr_pppol2tp sax;
138 int fd;
139
140 /* Note, the target socket must be bound already, else it will not be ready */
141 sax.sa_family = AF_PPPOX;
142 sax.sa_protocol = PX_PROTO_OL2TP;
143 sax.pppol2tp.fd = tunnel_fd;
144 sax.pppol2tp.addr.sin_addr.s_addr = addr->sin_addr.s_addr;
145 sax.pppol2tp.addr.sin_port = addr->sin_port;
146 sax.pppol2tp.addr.sin_family = AF_INET;
147 sax.pppol2tp.s_tunnel = tunnel_id;
148 sax.pppol2tp.s_session = session_id;
149 sax.pppol2tp.d_tunnel = peer_tunnel_id;
150 sax.pppol2tp.d_session = peer_session_id;
151
152 /* session_fd is the fd of the session's PPPoL2TP socket.
153 * tunnel_fd is the fd of the tunnel UDP socket.
154 */
155 fd = connect(session_fd, (struct sockaddr *)&sax, sizeof(sax));
156 if (fd < 0 ) {
157 return -errno;
158 }
159 return 0;
160
161Miscellanous
162============
163
164The PPPoL2TP driver was developed as part of the OpenL2TP project by
165Katalix Systems Ltd. OpenL2TP is a full-featured L2TP client / server,
166designed from the ground up to have the L2TP datapath in the
167kernel. The project also implemented the pppol2tp plugin for pppd
168which allows pppd to use the kernel driver. Details can be found at
169http://openl2tp.sourceforge.net.