diff options
-rw-r--r-- | arch/ppc/Kconfig | 4 | ||||
-rw-r--r-- | arch/ppc/Makefile | 1 | ||||
-rw-r--r-- | arch/ppc/kernel/Makefile | 1 | ||||
-rw-r--r-- | arch/ppc/kernel/align.c | 8 | ||||
-rw-r--r-- | arch/ppc/kernel/entry.S | 59 | ||||
-rw-r--r-- | arch/ppc/kernel/fpu.S | 133 | ||||
-rw-r--r-- | arch/ppc/kernel/head.S | 163 | ||||
-rw-r--r-- | arch/ppc/kernel/head_44x.S | 6 | ||||
-rw-r--r-- | arch/ppc/kernel/head_booke.h | 7 | ||||
-rw-r--r-- | arch/ppc/kernel/head_fsl_booke.S | 8 | ||||
-rw-r--r-- | arch/ppc/kernel/misc.S | 12 | ||||
-rw-r--r-- | arch/ppc/kernel/traps.c | 2 | ||||
-rw-r--r-- | include/asm-ppc/reg_booke.h | 1 |
13 files changed, 229 insertions, 176 deletions
diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig index 74aa1e92a395..c3d941345e3d 100644 --- a/arch/ppc/Kconfig +++ b/arch/ppc/Kconfig | |||
@@ -53,6 +53,7 @@ choice | |||
53 | 53 | ||
54 | config 6xx | 54 | config 6xx |
55 | bool "6xx/7xx/74xx/52xx/82xx/83xx" | 55 | bool "6xx/7xx/74xx/52xx/82xx/83xx" |
56 | select PPC_FPU | ||
56 | help | 57 | help |
57 | There are four types of PowerPC chips supported. The more common | 58 | There are four types of PowerPC chips supported. The more common |
58 | types (601, 603, 604, 740, 750, 7400), the Motorola embedded | 59 | types (601, 603, 604, 740, 750, 7400), the Motorola embedded |
@@ -86,6 +87,9 @@ config E500 | |||
86 | 87 | ||
87 | endchoice | 88 | endchoice |
88 | 89 | ||
90 | config PPC_FPU | ||
91 | bool | ||
92 | |||
89 | config BOOKE | 93 | config BOOKE |
90 | bool | 94 | bool |
91 | depends on E500 | 95 | depends on E500 |
diff --git a/arch/ppc/Makefile b/arch/ppc/Makefile index 73cbdda5b597..0432a25b4735 100644 --- a/arch/ppc/Makefile +++ b/arch/ppc/Makefile | |||
@@ -53,6 +53,7 @@ head-$(CONFIG_FSL_BOOKE) := arch/ppc/kernel/head_fsl_booke.o | |||
53 | 53 | ||
54 | head-$(CONFIG_6xx) += arch/ppc/kernel/idle_6xx.o | 54 | head-$(CONFIG_6xx) += arch/ppc/kernel/idle_6xx.o |
55 | head-$(CONFIG_POWER4) += arch/ppc/kernel/idle_power4.o | 55 | head-$(CONFIG_POWER4) += arch/ppc/kernel/idle_power4.o |
56 | head-$(CONFIG_PPC_FPU) += arch/ppc/kernel/fpu.o | ||
56 | 57 | ||
57 | core-y += arch/ppc/kernel/ arch/ppc/platforms/ \ | 58 | core-y += arch/ppc/kernel/ arch/ppc/platforms/ \ |
58 | arch/ppc/mm/ arch/ppc/lib/ arch/ppc/syslib/ | 59 | arch/ppc/mm/ arch/ppc/lib/ arch/ppc/syslib/ |
diff --git a/arch/ppc/kernel/Makefile b/arch/ppc/kernel/Makefile index 86bc878cb3ee..b284451802c9 100644 --- a/arch/ppc/kernel/Makefile +++ b/arch/ppc/kernel/Makefile | |||
@@ -9,6 +9,7 @@ extra-$(CONFIG_FSL_BOOKE) := head_fsl_booke.o | |||
9 | extra-$(CONFIG_8xx) := head_8xx.o | 9 | extra-$(CONFIG_8xx) := head_8xx.o |
10 | extra-$(CONFIG_6xx) += idle_6xx.o | 10 | extra-$(CONFIG_6xx) += idle_6xx.o |
11 | extra-$(CONFIG_POWER4) += idle_power4.o | 11 | extra-$(CONFIG_POWER4) += idle_power4.o |
12 | extra-$(CONFIG_PPC_FPU) += fpu.o | ||
12 | extra-y += vmlinux.lds | 13 | extra-y += vmlinux.lds |
13 | 14 | ||
14 | obj-y := entry.o traps.o irq.o idle.o time.o misc.o \ | 15 | obj-y := entry.o traps.o irq.o idle.o time.o misc.o \ |
diff --git a/arch/ppc/kernel/align.c b/arch/ppc/kernel/align.c index 79c929475037..40d356c66c41 100644 --- a/arch/ppc/kernel/align.c +++ b/arch/ppc/kernel/align.c | |||
@@ -368,16 +368,24 @@ fix_alignment(struct pt_regs *regs) | |||
368 | 368 | ||
369 | /* Single-precision FP load and store require conversions... */ | 369 | /* Single-precision FP load and store require conversions... */ |
370 | case LD+F+S: | 370 | case LD+F+S: |
371 | #ifdef CONFIG_PPC_FPU | ||
371 | preempt_disable(); | 372 | preempt_disable(); |
372 | enable_kernel_fp(); | 373 | enable_kernel_fp(); |
373 | cvt_fd(&data.f, &data.d, ¤t->thread.fpscr); | 374 | cvt_fd(&data.f, &data.d, ¤t->thread.fpscr); |
374 | preempt_enable(); | 375 | preempt_enable(); |
376 | #else | ||
377 | return 0; | ||
378 | #endif | ||
375 | break; | 379 | break; |
376 | case ST+F+S: | 380 | case ST+F+S: |
381 | #ifdef CONFIG_PPC_FPU | ||
377 | preempt_disable(); | 382 | preempt_disable(); |
378 | enable_kernel_fp(); | 383 | enable_kernel_fp(); |
379 | cvt_df(&data.d, &data.f, ¤t->thread.fpscr); | 384 | cvt_df(&data.d, &data.f, ¤t->thread.fpscr); |
380 | preempt_enable(); | 385 | preempt_enable(); |
386 | #else | ||
387 | return 0; | ||
388 | #endif | ||
381 | break; | 389 | break; |
382 | } | 390 | } |
383 | 391 | ||
diff --git a/arch/ppc/kernel/entry.S b/arch/ppc/kernel/entry.S index 035217d6c0f1..5f075dbc4ee7 100644 --- a/arch/ppc/kernel/entry.S +++ b/arch/ppc/kernel/entry.S | |||
@@ -563,6 +563,65 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) | |||
563 | addi r1,r1,INT_FRAME_SIZE | 563 | addi r1,r1,INT_FRAME_SIZE |
564 | blr | 564 | blr |
565 | 565 | ||
566 | .globl fast_exception_return | ||
567 | fast_exception_return: | ||
568 | #if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE)) | ||
569 | andi. r10,r9,MSR_RI /* check for recoverable interrupt */ | ||
570 | beq 1f /* if not, we've got problems */ | ||
571 | #endif | ||
572 | |||
573 | 2: REST_4GPRS(3, r11) | ||
574 | lwz r10,_CCR(r11) | ||
575 | REST_GPR(1, r11) | ||
576 | mtcr r10 | ||
577 | lwz r10,_LINK(r11) | ||
578 | mtlr r10 | ||
579 | REST_GPR(10, r11) | ||
580 | mtspr SPRN_SRR1,r9 | ||
581 | mtspr SPRN_SRR0,r12 | ||
582 | REST_GPR(9, r11) | ||
583 | REST_GPR(12, r11) | ||
584 | lwz r11,GPR11(r11) | ||
585 | SYNC | ||
586 | RFI | ||
587 | |||
588 | #if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE)) | ||
589 | /* check if the exception happened in a restartable section */ | ||
590 | 1: lis r3,exc_exit_restart_end@ha | ||
591 | addi r3,r3,exc_exit_restart_end@l | ||
592 | cmplw r12,r3 | ||
593 | bge 3f | ||
594 | lis r4,exc_exit_restart@ha | ||
595 | addi r4,r4,exc_exit_restart@l | ||
596 | cmplw r12,r4 | ||
597 | blt 3f | ||
598 | lis r3,fee_restarts@ha | ||
599 | tophys(r3,r3) | ||
600 | lwz r5,fee_restarts@l(r3) | ||
601 | addi r5,r5,1 | ||
602 | stw r5,fee_restarts@l(r3) | ||
603 | mr r12,r4 /* restart at exc_exit_restart */ | ||
604 | b 2b | ||
605 | |||
606 | .comm fee_restarts,4 | ||
607 | |||
608 | /* aargh, a nonrecoverable interrupt, panic */ | ||
609 | /* aargh, we don't know which trap this is */ | ||
610 | /* but the 601 doesn't implement the RI bit, so assume it's OK */ | ||
611 | 3: | ||
612 | BEGIN_FTR_SECTION | ||
613 | b 2b | ||
614 | END_FTR_SECTION_IFSET(CPU_FTR_601) | ||
615 | li r10,-1 | ||
616 | stw r10,TRAP(r11) | ||
617 | addi r3,r1,STACK_FRAME_OVERHEAD | ||
618 | lis r10,MSR_KERNEL@h | ||
619 | ori r10,r10,MSR_KERNEL@l | ||
620 | bl transfer_to_handler_full | ||
621 | .long nonrecoverable_exception | ||
622 | .long ret_from_except | ||
623 | #endif | ||
624 | |||
566 | .globl sigreturn_exit | 625 | .globl sigreturn_exit |
567 | sigreturn_exit: | 626 | sigreturn_exit: |
568 | subi r1,r3,STACK_FRAME_OVERHEAD | 627 | subi r1,r3,STACK_FRAME_OVERHEAD |
diff --git a/arch/ppc/kernel/fpu.S b/arch/ppc/kernel/fpu.S new file mode 100644 index 000000000000..6189b26f640f --- /dev/null +++ b/arch/ppc/kernel/fpu.S | |||
@@ -0,0 +1,133 @@ | |||
1 | /* | ||
2 | * FPU support code, moved here from head.S so that it can be used | ||
3 | * by chips which use other head-whatever.S files. | ||
4 | * | ||
5 | * This program is free software; you can redistribute it and/or | ||
6 | * modify it under the terms of the GNU General Public License | ||
7 | * as published by the Free Software Foundation; either version | ||
8 | * 2 of the License, or (at your option) any later version. | ||
9 | * | ||
10 | */ | ||
11 | |||
12 | #include <linux/config.h> | ||
13 | #include <asm/processor.h> | ||
14 | #include <asm/page.h> | ||
15 | #include <asm/mmu.h> | ||
16 | #include <asm/pgtable.h> | ||
17 | #include <asm/cputable.h> | ||
18 | #include <asm/cache.h> | ||
19 | #include <asm/thread_info.h> | ||
20 | #include <asm/ppc_asm.h> | ||
21 | #include <asm/offsets.h> | ||
22 | |||
23 | /* | ||
24 | * This task wants to use the FPU now. | ||
25 | * On UP, disable FP for the task which had the FPU previously, | ||
26 | * and save its floating-point registers in its thread_struct. | ||
27 | * Load up this task's FP registers from its thread_struct, | ||
28 | * enable the FPU for the current task and return to the task. | ||
29 | */ | ||
30 | .globl load_up_fpu | ||
31 | load_up_fpu: | ||
32 | mfmsr r5 | ||
33 | ori r5,r5,MSR_FP | ||
34 | #ifdef CONFIG_PPC64BRIDGE | ||
35 | clrldi r5,r5,1 /* turn off 64-bit mode */ | ||
36 | #endif /* CONFIG_PPC64BRIDGE */ | ||
37 | SYNC | ||
38 | MTMSRD(r5) /* enable use of fpu now */ | ||
39 | isync | ||
40 | /* | ||
41 | * For SMP, we don't do lazy FPU switching because it just gets too | ||
42 | * horrendously complex, especially when a task switches from one CPU | ||
43 | * to another. Instead we call giveup_fpu in switch_to. | ||
44 | */ | ||
45 | #ifndef CONFIG_SMP | ||
46 | tophys(r6,0) /* get __pa constant */ | ||
47 | addis r3,r6,last_task_used_math@ha | ||
48 | lwz r4,last_task_used_math@l(r3) | ||
49 | cmpwi 0,r4,0 | ||
50 | beq 1f | ||
51 | add r4,r4,r6 | ||
52 | addi r4,r4,THREAD /* want last_task_used_math->thread */ | ||
53 | SAVE_32FPRS(0, r4) | ||
54 | mffs fr0 | ||
55 | stfd fr0,THREAD_FPSCR-4(r4) | ||
56 | lwz r5,PT_REGS(r4) | ||
57 | add r5,r5,r6 | ||
58 | lwz r4,_MSR-STACK_FRAME_OVERHEAD(r5) | ||
59 | li r10,MSR_FP|MSR_FE0|MSR_FE1 | ||
60 | andc r4,r4,r10 /* disable FP for previous task */ | ||
61 | stw r4,_MSR-STACK_FRAME_OVERHEAD(r5) | ||
62 | 1: | ||
63 | #endif /* CONFIG_SMP */ | ||
64 | /* enable use of FP after return */ | ||
65 | mfspr r5,SPRN_SPRG3 /* current task's THREAD (phys) */ | ||
66 | lwz r4,THREAD_FPEXC_MODE(r5) | ||
67 | ori r9,r9,MSR_FP /* enable FP for current */ | ||
68 | or r9,r9,r4 | ||
69 | lfd fr0,THREAD_FPSCR-4(r5) | ||
70 | mtfsf 0xff,fr0 | ||
71 | REST_32FPRS(0, r5) | ||
72 | #ifndef CONFIG_SMP | ||
73 | subi r4,r5,THREAD | ||
74 | sub r4,r4,r6 | ||
75 | stw r4,last_task_used_math@l(r3) | ||
76 | #endif /* CONFIG_SMP */ | ||
77 | /* restore registers and return */ | ||
78 | /* we haven't used ctr or xer or lr */ | ||
79 | b fast_exception_return | ||
80 | |||
81 | /* | ||
82 | * FP unavailable trap from kernel - print a message, but let | ||
83 | * the task use FP in the kernel until it returns to user mode. | ||
84 | */ | ||
85 | .globl KernelFP | ||
86 | KernelFP: | ||
87 | lwz r3,_MSR(r1) | ||
88 | ori r3,r3,MSR_FP | ||
89 | stw r3,_MSR(r1) /* enable use of FP after return */ | ||
90 | lis r3,86f@h | ||
91 | ori r3,r3,86f@l | ||
92 | mr r4,r2 /* current */ | ||
93 | lwz r5,_NIP(r1) | ||
94 | bl printk | ||
95 | b ret_from_except | ||
96 | 86: .string "floating point used in kernel (task=%p, pc=%x)\n" | ||
97 | .align 4,0 | ||
98 | |||
99 | /* | ||
100 | * giveup_fpu(tsk) | ||
101 | * Disable FP for the task given as the argument, | ||
102 | * and save the floating-point registers in its thread_struct. | ||
103 | * Enables the FPU for use in the kernel on return. | ||
104 | */ | ||
105 | .globl giveup_fpu | ||
106 | giveup_fpu: | ||
107 | mfmsr r5 | ||
108 | ori r5,r5,MSR_FP | ||
109 | SYNC_601 | ||
110 | ISYNC_601 | ||
111 | MTMSRD(r5) /* enable use of fpu now */ | ||
112 | SYNC_601 | ||
113 | isync | ||
114 | cmpwi 0,r3,0 | ||
115 | beqlr- /* if no previous owner, done */ | ||
116 | addi r3,r3,THREAD /* want THREAD of task */ | ||
117 | lwz r5,PT_REGS(r3) | ||
118 | cmpwi 0,r5,0 | ||
119 | SAVE_32FPRS(0, r3) | ||
120 | mffs fr0 | ||
121 | stfd fr0,THREAD_FPSCR-4(r3) | ||
122 | beq 1f | ||
123 | lwz r4,_MSR-STACK_FRAME_OVERHEAD(r5) | ||
124 | li r3,MSR_FP|MSR_FE0|MSR_FE1 | ||
125 | andc r4,r4,r3 /* disable FP for previous task */ | ||
126 | stw r4,_MSR-STACK_FRAME_OVERHEAD(r5) | ||
127 | 1: | ||
128 | #ifndef CONFIG_SMP | ||
129 | li r5,0 | ||
130 | lis r4,last_task_used_math@ha | ||
131 | stw r5,last_task_used_math@l(r4) | ||
132 | #endif /* CONFIG_SMP */ | ||
133 | blr | ||
diff --git a/arch/ppc/kernel/head.S b/arch/ppc/kernel/head.S index 1a89a71e0acc..a931d773715f 100644 --- a/arch/ppc/kernel/head.S +++ b/arch/ppc/kernel/head.S | |||
@@ -775,133 +775,6 @@ InstructionSegment: | |||
775 | EXC_XFER_STD(0x480, UnknownException) | 775 | EXC_XFER_STD(0x480, UnknownException) |
776 | #endif /* CONFIG_PPC64BRIDGE */ | 776 | #endif /* CONFIG_PPC64BRIDGE */ |
777 | 777 | ||
778 | /* | ||
779 | * This task wants to use the FPU now. | ||
780 | * On UP, disable FP for the task which had the FPU previously, | ||
781 | * and save its floating-point registers in its thread_struct. | ||
782 | * Load up this task's FP registers from its thread_struct, | ||
783 | * enable the FPU for the current task and return to the task. | ||
784 | */ | ||
785 | load_up_fpu: | ||
786 | mfmsr r5 | ||
787 | ori r5,r5,MSR_FP | ||
788 | #ifdef CONFIG_PPC64BRIDGE | ||
789 | clrldi r5,r5,1 /* turn off 64-bit mode */ | ||
790 | #endif /* CONFIG_PPC64BRIDGE */ | ||
791 | SYNC | ||
792 | MTMSRD(r5) /* enable use of fpu now */ | ||
793 | isync | ||
794 | /* | ||
795 | * For SMP, we don't do lazy FPU switching because it just gets too | ||
796 | * horrendously complex, especially when a task switches from one CPU | ||
797 | * to another. Instead we call giveup_fpu in switch_to. | ||
798 | */ | ||
799 | #ifndef CONFIG_SMP | ||
800 | tophys(r6,0) /* get __pa constant */ | ||
801 | addis r3,r6,last_task_used_math@ha | ||
802 | lwz r4,last_task_used_math@l(r3) | ||
803 | cmpwi 0,r4,0 | ||
804 | beq 1f | ||
805 | add r4,r4,r6 | ||
806 | addi r4,r4,THREAD /* want last_task_used_math->thread */ | ||
807 | SAVE_32FPRS(0, r4) | ||
808 | mffs fr0 | ||
809 | stfd fr0,THREAD_FPSCR-4(r4) | ||
810 | lwz r5,PT_REGS(r4) | ||
811 | add r5,r5,r6 | ||
812 | lwz r4,_MSR-STACK_FRAME_OVERHEAD(r5) | ||
813 | li r10,MSR_FP|MSR_FE0|MSR_FE1 | ||
814 | andc r4,r4,r10 /* disable FP for previous task */ | ||
815 | stw r4,_MSR-STACK_FRAME_OVERHEAD(r5) | ||
816 | 1: | ||
817 | #endif /* CONFIG_SMP */ | ||
818 | /* enable use of FP after return */ | ||
819 | mfspr r5,SPRN_SPRG3 /* current task's THREAD (phys) */ | ||
820 | lwz r4,THREAD_FPEXC_MODE(r5) | ||
821 | ori r9,r9,MSR_FP /* enable FP for current */ | ||
822 | or r9,r9,r4 | ||
823 | lfd fr0,THREAD_FPSCR-4(r5) | ||
824 | mtfsf 0xff,fr0 | ||
825 | REST_32FPRS(0, r5) | ||
826 | #ifndef CONFIG_SMP | ||
827 | subi r4,r5,THREAD | ||
828 | sub r4,r4,r6 | ||
829 | stw r4,last_task_used_math@l(r3) | ||
830 | #endif /* CONFIG_SMP */ | ||
831 | /* restore registers and return */ | ||
832 | /* we haven't used ctr or xer or lr */ | ||
833 | /* fall through to fast_exception_return */ | ||
834 | |||
835 | .globl fast_exception_return | ||
836 | fast_exception_return: | ||
837 | andi. r10,r9,MSR_RI /* check for recoverable interrupt */ | ||
838 | beq 1f /* if not, we've got problems */ | ||
839 | 2: REST_4GPRS(3, r11) | ||
840 | lwz r10,_CCR(r11) | ||
841 | REST_GPR(1, r11) | ||
842 | mtcr r10 | ||
843 | lwz r10,_LINK(r11) | ||
844 | mtlr r10 | ||
845 | REST_GPR(10, r11) | ||
846 | mtspr SPRN_SRR1,r9 | ||
847 | mtspr SPRN_SRR0,r12 | ||
848 | REST_GPR(9, r11) | ||
849 | REST_GPR(12, r11) | ||
850 | lwz r11,GPR11(r11) | ||
851 | SYNC | ||
852 | RFI | ||
853 | |||
854 | /* check if the exception happened in a restartable section */ | ||
855 | 1: lis r3,exc_exit_restart_end@ha | ||
856 | addi r3,r3,exc_exit_restart_end@l | ||
857 | cmplw r12,r3 | ||
858 | bge 3f | ||
859 | lis r4,exc_exit_restart@ha | ||
860 | addi r4,r4,exc_exit_restart@l | ||
861 | cmplw r12,r4 | ||
862 | blt 3f | ||
863 | lis r3,fee_restarts@ha | ||
864 | tophys(r3,r3) | ||
865 | lwz r5,fee_restarts@l(r3) | ||
866 | addi r5,r5,1 | ||
867 | stw r5,fee_restarts@l(r3) | ||
868 | mr r12,r4 /* restart at exc_exit_restart */ | ||
869 | b 2b | ||
870 | |||
871 | .comm fee_restarts,4 | ||
872 | |||
873 | /* aargh, a nonrecoverable interrupt, panic */ | ||
874 | /* aargh, we don't know which trap this is */ | ||
875 | /* but the 601 doesn't implement the RI bit, so assume it's OK */ | ||
876 | 3: | ||
877 | BEGIN_FTR_SECTION | ||
878 | b 2b | ||
879 | END_FTR_SECTION_IFSET(CPU_FTR_601) | ||
880 | li r10,-1 | ||
881 | stw r10,TRAP(r11) | ||
882 | addi r3,r1,STACK_FRAME_OVERHEAD | ||
883 | li r10,MSR_KERNEL | ||
884 | bl transfer_to_handler_full | ||
885 | .long nonrecoverable_exception | ||
886 | .long ret_from_except | ||
887 | |||
888 | /* | ||
889 | * FP unavailable trap from kernel - print a message, but let | ||
890 | * the task use FP in the kernel until it returns to user mode. | ||
891 | */ | ||
892 | KernelFP: | ||
893 | lwz r3,_MSR(r1) | ||
894 | ori r3,r3,MSR_FP | ||
895 | stw r3,_MSR(r1) /* enable use of FP after return */ | ||
896 | lis r3,86f@h | ||
897 | ori r3,r3,86f@l | ||
898 | mr r4,r2 /* current */ | ||
899 | lwz r5,_NIP(r1) | ||
900 | bl printk | ||
901 | b ret_from_except | ||
902 | 86: .string "floating point used in kernel (task=%p, pc=%x)\n" | ||
903 | .align 4,0 | ||
904 | |||
905 | #ifdef CONFIG_ALTIVEC | 778 | #ifdef CONFIG_ALTIVEC |
906 | /* Note that the AltiVec support is closely modeled after the FP | 779 | /* Note that the AltiVec support is closely modeled after the FP |
907 | * support. Changes to one are likely to be applicable to the | 780 | * support. Changes to one are likely to be applicable to the |
@@ -1016,42 +889,6 @@ giveup_altivec: | |||
1016 | #endif /* CONFIG_ALTIVEC */ | 889 | #endif /* CONFIG_ALTIVEC */ |
1017 | 890 | ||
1018 | /* | 891 | /* |
1019 | * giveup_fpu(tsk) | ||
1020 | * Disable FP for the task given as the argument, | ||
1021 | * and save the floating-point registers in its thread_struct. | ||
1022 | * Enables the FPU for use in the kernel on return. | ||
1023 | */ | ||
1024 | .globl giveup_fpu | ||
1025 | giveup_fpu: | ||
1026 | mfmsr r5 | ||
1027 | ori r5,r5,MSR_FP | ||
1028 | SYNC_601 | ||
1029 | ISYNC_601 | ||
1030 | MTMSRD(r5) /* enable use of fpu now */ | ||
1031 | SYNC_601 | ||
1032 | isync | ||
1033 | cmpwi 0,r3,0 | ||
1034 | beqlr- /* if no previous owner, done */ | ||
1035 | addi r3,r3,THREAD /* want THREAD of task */ | ||
1036 | lwz r5,PT_REGS(r3) | ||
1037 | cmpwi 0,r5,0 | ||
1038 | SAVE_32FPRS(0, r3) | ||
1039 | mffs fr0 | ||
1040 | stfd fr0,THREAD_FPSCR-4(r3) | ||
1041 | beq 1f | ||
1042 | lwz r4,_MSR-STACK_FRAME_OVERHEAD(r5) | ||
1043 | li r3,MSR_FP|MSR_FE0|MSR_FE1 | ||
1044 | andc r4,r4,r3 /* disable FP for previous task */ | ||
1045 | stw r4,_MSR-STACK_FRAME_OVERHEAD(r5) | ||
1046 | 1: | ||
1047 | #ifndef CONFIG_SMP | ||
1048 | li r5,0 | ||
1049 | lis r4,last_task_used_math@ha | ||
1050 | stw r5,last_task_used_math@l(r4) | ||
1051 | #endif /* CONFIG_SMP */ | ||
1052 | blr | ||
1053 | |||
1054 | /* | ||
1055 | * This code is jumped to from the startup code to copy | 892 | * This code is jumped to from the startup code to copy |
1056 | * the kernel image to physical address 0. | 893 | * the kernel image to physical address 0. |
1057 | */ | 894 | */ |
diff --git a/arch/ppc/kernel/head_44x.S b/arch/ppc/kernel/head_44x.S index 9ed8165a3d6c..9b6a8e513657 100644 --- a/arch/ppc/kernel/head_44x.S +++ b/arch/ppc/kernel/head_44x.S | |||
@@ -426,7 +426,11 @@ interrupt_base: | |||
426 | PROGRAM_EXCEPTION | 426 | PROGRAM_EXCEPTION |
427 | 427 | ||
428 | /* Floating Point Unavailable Interrupt */ | 428 | /* Floating Point Unavailable Interrupt */ |
429 | #ifdef CONFIG_PPC_FPU | ||
430 | FP_UNAVAILABLE_EXCEPTION | ||
431 | #else | ||
429 | EXCEPTION(0x2010, FloatingPointUnavailable, UnknownException, EXC_XFER_EE) | 432 | EXCEPTION(0x2010, FloatingPointUnavailable, UnknownException, EXC_XFER_EE) |
433 | #endif | ||
430 | 434 | ||
431 | /* System Call Interrupt */ | 435 | /* System Call Interrupt */ |
432 | START_EXCEPTION(SystemCall) | 436 | START_EXCEPTION(SystemCall) |
@@ -686,8 +690,10 @@ _GLOBAL(giveup_altivec) | |||
686 | * | 690 | * |
687 | * The 44x core does not have an FPU. | 691 | * The 44x core does not have an FPU. |
688 | */ | 692 | */ |
693 | #ifndef CONFIG_PPC_FPU | ||
689 | _GLOBAL(giveup_fpu) | 694 | _GLOBAL(giveup_fpu) |
690 | blr | 695 | blr |
696 | #endif | ||
691 | 697 | ||
692 | /* | 698 | /* |
693 | * extern void abort(void) | 699 | * extern void abort(void) |
diff --git a/arch/ppc/kernel/head_booke.h b/arch/ppc/kernel/head_booke.h index 884dac916bce..f213d12eec08 100644 --- a/arch/ppc/kernel/head_booke.h +++ b/arch/ppc/kernel/head_booke.h | |||
@@ -337,4 +337,11 @@ label: | |||
337 | addi r3,r1,STACK_FRAME_OVERHEAD; \ | 337 | addi r3,r1,STACK_FRAME_OVERHEAD; \ |
338 | EXC_XFER_LITE(0x0900, timer_interrupt) | 338 | EXC_XFER_LITE(0x0900, timer_interrupt) |
339 | 339 | ||
340 | #define FP_UNAVAILABLE_EXCEPTION \ | ||
341 | START_EXCEPTION(FloatingPointUnavailable) \ | ||
342 | NORMAL_EXCEPTION_PROLOG; \ | ||
343 | bne load_up_fpu; /* if from user, just load it up */ \ | ||
344 | addi r3,r1,STACK_FRAME_OVERHEAD; \ | ||
345 | EXC_XFER_EE_LITE(0x800, KernelFP) | ||
346 | |||
340 | #endif /* __HEAD_BOOKE_H__ */ | 347 | #endif /* __HEAD_BOOKE_H__ */ |
diff --git a/arch/ppc/kernel/head_fsl_booke.S b/arch/ppc/kernel/head_fsl_booke.S index d64bf61d2b1f..f22ddce36135 100644 --- a/arch/ppc/kernel/head_fsl_booke.S +++ b/arch/ppc/kernel/head_fsl_booke.S | |||
@@ -504,7 +504,11 @@ interrupt_base: | |||
504 | PROGRAM_EXCEPTION | 504 | PROGRAM_EXCEPTION |
505 | 505 | ||
506 | /* Floating Point Unavailable Interrupt */ | 506 | /* Floating Point Unavailable Interrupt */ |
507 | #ifdef CONFIG_PPC_FPU | ||
508 | FP_UNAVAILABLE_EXCEPTION | ||
509 | #else | ||
507 | EXCEPTION(0x0800, FloatingPointUnavailable, UnknownException, EXC_XFER_EE) | 510 | EXCEPTION(0x0800, FloatingPointUnavailable, UnknownException, EXC_XFER_EE) |
511 | #endif | ||
508 | 512 | ||
509 | /* System Call Interrupt */ | 513 | /* System Call Interrupt */ |
510 | START_EXCEPTION(SystemCall) | 514 | START_EXCEPTION(SystemCall) |
@@ -916,10 +920,12 @@ _GLOBAL(giveup_spe) | |||
916 | /* | 920 | /* |
917 | * extern void giveup_fpu(struct task_struct *prev) | 921 | * extern void giveup_fpu(struct task_struct *prev) |
918 | * | 922 | * |
919 | * The e500 core does not have an FPU. | 923 | * Not all FSL Book-E cores have an FPU |
920 | */ | 924 | */ |
925 | #ifndef CONFIG_PPC_FPU | ||
921 | _GLOBAL(giveup_fpu) | 926 | _GLOBAL(giveup_fpu) |
922 | blr | 927 | blr |
928 | #endif | ||
923 | 929 | ||
924 | /* | 930 | /* |
925 | * extern void abort(void) | 931 | * extern void abort(void) |
diff --git a/arch/ppc/kernel/misc.S b/arch/ppc/kernel/misc.S index 73f7c23b0dd4..e4f1615ec13f 100644 --- a/arch/ppc/kernel/misc.S +++ b/arch/ppc/kernel/misc.S | |||
@@ -1096,17 +1096,7 @@ _GLOBAL(_get_SP) | |||
1096 | * and exceptions as if the cpu had performed the load or store. | 1096 | * and exceptions as if the cpu had performed the load or store. |
1097 | */ | 1097 | */ |
1098 | 1098 | ||
1099 | #if defined(CONFIG_4xx) || defined(CONFIG_E500) | 1099 | #ifdef CONFIG_PPC_FPU |
1100 | _GLOBAL(cvt_fd) | ||
1101 | lfs 0,0(r3) | ||
1102 | stfd 0,0(r4) | ||
1103 | blr | ||
1104 | |||
1105 | _GLOBAL(cvt_df) | ||
1106 | lfd 0,0(r3) | ||
1107 | stfs 0,0(r4) | ||
1108 | blr | ||
1109 | #else | ||
1110 | _GLOBAL(cvt_fd) | 1100 | _GLOBAL(cvt_fd) |
1111 | lfd 0,-4(r5) /* load up fpscr value */ | 1101 | lfd 0,-4(r5) /* load up fpscr value */ |
1112 | mtfsf 0xff,0 | 1102 | mtfsf 0xff,0 |
diff --git a/arch/ppc/kernel/traps.c b/arch/ppc/kernel/traps.c index 361865c4bc84..f8e7e324a173 100644 --- a/arch/ppc/kernel/traps.c +++ b/arch/ppc/kernel/traps.c | |||
@@ -176,7 +176,7 @@ static inline int check_io_access(struct pt_regs *regs) | |||
176 | #else | 176 | #else |
177 | #define get_mc_reason(regs) (mfspr(SPRN_MCSR)) | 177 | #define get_mc_reason(regs) (mfspr(SPRN_MCSR)) |
178 | #endif | 178 | #endif |
179 | #define REASON_FP 0 | 179 | #define REASON_FP ESR_FP |
180 | #define REASON_ILLEGAL ESR_PIL | 180 | #define REASON_ILLEGAL ESR_PIL |
181 | #define REASON_PRIVILEGED ESR_PPR | 181 | #define REASON_PRIVILEGED ESR_PPR |
182 | #define REASON_TRAP ESR_PTR | 182 | #define REASON_TRAP ESR_PTR |
diff --git a/include/asm-ppc/reg_booke.h b/include/asm-ppc/reg_booke.h index e70c25f3c339..45c5e6f2b7ab 100644 --- a/include/asm-ppc/reg_booke.h +++ b/include/asm-ppc/reg_booke.h | |||
@@ -305,6 +305,7 @@ do { \ | |||
305 | #define ESR_PIL 0x08000000 /* Program Exception - Illegal */ | 305 | #define ESR_PIL 0x08000000 /* Program Exception - Illegal */ |
306 | #define ESR_PPR 0x04000000 /* Program Exception - Priveleged */ | 306 | #define ESR_PPR 0x04000000 /* Program Exception - Priveleged */ |
307 | #define ESR_PTR 0x02000000 /* Program Exception - Trap */ | 307 | #define ESR_PTR 0x02000000 /* Program Exception - Trap */ |
308 | #define ESR_FP 0x01000000 /* Floating Point Operation */ | ||
308 | #define ESR_DST 0x00800000 /* Storage Exception - Data miss */ | 309 | #define ESR_DST 0x00800000 /* Storage Exception - Data miss */ |
309 | #define ESR_DIZ 0x00400000 /* Storage Exception - Zone fault */ | 310 | #define ESR_DIZ 0x00400000 /* Storage Exception - Zone fault */ |
310 | #define ESR_ST 0x00800000 /* Store Operation */ | 311 | #define ESR_ST 0x00800000 /* Store Operation */ |