aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/x86/Kconfig10
-rw-r--r--arch/x86/include/asm/geode.h117
-rw-r--r--arch/x86/kernel/Makefile1
-rw-r--r--arch/x86/kernel/geode_32.c174
-rw-r--r--arch/x86/kernel/mfgpt_32.c410
-rw-r--r--drivers/gpio/Kconfig2
-rw-r--r--drivers/misc/Kconfig2
7 files changed, 2 insertions, 714 deletions
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 6ad0985e8d76..3b2a5aca4edb 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -2012,16 +2012,6 @@ config SCx200HR_TIMER
2012 processor goes idle (as is done by the scheduler). The 2012 processor goes idle (as is done by the scheduler). The
2013 other workaround is idle=poll boot option. 2013 other workaround is idle=poll boot option.
2014 2014
2015config GEODE_MFGPT_TIMER
2016 def_bool y
2017 prompt "Geode Multi-Function General Purpose Timer (MFGPT) events"
2018 depends on MGEODE_LX && GENERIC_TIME && GENERIC_CLOCKEVENTS
2019 ---help---
2020 This driver provides a clock event source based on the MFGPT
2021 timer(s) in the CS5535 and CS5536 companion chip for the geode.
2022 MFGPTs have a better resolution and max interval than the
2023 generic PIT, and are suitable for use as high-res timers.
2024
2025config OLPC 2015config OLPC
2026 bool "One Laptop Per Child support" 2016 bool "One Laptop Per Child support"
2027 select GPIOLIB 2017 select GPIOLIB
diff --git a/arch/x86/include/asm/geode.h b/arch/x86/include/asm/geode.h
index ae104da6ad5a..7cd73552a4e8 100644
--- a/arch/x86/include/asm/geode.h
+++ b/arch/x86/include/asm/geode.h
@@ -14,98 +14,6 @@
14#include <linux/io.h> 14#include <linux/io.h>
15#include <linux/cs5535.h> 15#include <linux/cs5535.h>
16 16
17/* Generic southbridge functions */
18
19#define GEODE_DEV_PMS 0
20#define GEODE_DEV_ACPI 1
21#define GEODE_DEV_GPIO 2
22#define GEODE_DEV_MFGPT 3
23
24extern int geode_get_dev_base(unsigned int dev);
25
26/* Useful macros */
27#define geode_pms_base() geode_get_dev_base(GEODE_DEV_PMS)
28#define geode_acpi_base() geode_get_dev_base(GEODE_DEV_ACPI)
29#define geode_gpio_base() geode_get_dev_base(GEODE_DEV_GPIO)
30#define geode_mfgpt_base() geode_get_dev_base(GEODE_DEV_MFGPT)
31
32/* MSRS */
33
34#define MSR_LBAR_SMB 0x5140000B
35#define MSR_LBAR_GPIO 0x5140000C
36#define MSR_LBAR_MFGPT 0x5140000D
37#define MSR_LBAR_ACPI 0x5140000E
38#define MSR_LBAR_PMS 0x5140000F
39
40/* Resource Sizes */
41
42#define LBAR_GPIO_SIZE 0xFF
43#define LBAR_MFGPT_SIZE 0x40
44#define LBAR_ACPI_SIZE 0x40
45#define LBAR_PMS_SIZE 0x80
46
47/* ACPI registers (PMS block) */
48
49/*
50 * PM1_EN is only valid when VSA is enabled for 16 bit reads.
51 * When VSA is not enabled, *always* read both PM1_STS and PM1_EN
52 * with a 32 bit read at offset 0x0
53 */
54
55#define PM1_STS 0x00
56#define PM1_EN 0x02
57#define PM1_CNT 0x08
58#define PM2_CNT 0x0C
59#define PM_TMR 0x10
60#define PM_GPE0_STS 0x18
61#define PM_GPE0_EN 0x1C
62
63/* PMC registers (PMS block) */
64
65#define PM_SSD 0x00
66#define PM_SCXA 0x04
67#define PM_SCYA 0x08
68#define PM_OUT_SLPCTL 0x0C
69#define PM_SCLK 0x10
70#define PM_SED 0x1
71#define PM_SCXD 0x18
72#define PM_SCYD 0x1C
73#define PM_IN_SLPCTL 0x20
74#define PM_WKD 0x30
75#define PM_WKXD 0x34
76#define PM_RD 0x38
77#define PM_WKXA 0x3C
78#define PM_FSD 0x40
79#define PM_TSD 0x44
80#define PM_PSD 0x48
81#define PM_NWKD 0x4C
82#define PM_AWKD 0x50
83#define PM_SSC 0x54
84
85static inline u32 geode_gpio(unsigned int nr)
86{
87 BUG_ON(nr > 28);
88 return 1 << nr;
89}
90
91extern void geode_gpio_set(u32, unsigned int);
92extern void geode_gpio_clear(u32, unsigned int);
93extern int geode_gpio_isset(u32, unsigned int);
94extern void geode_gpio_setup_event(unsigned int, int, int);
95extern void geode_gpio_set_irq(unsigned int, unsigned int);
96
97static inline void geode_gpio_event_irq(unsigned int gpio, int pair)
98{
99 geode_gpio_setup_event(gpio, pair, 0);
100}
101
102static inline void geode_gpio_event_pme(unsigned int gpio, int pair)
103{
104 geode_gpio_setup_event(gpio, pair, 1);
105}
106
107/* Specific geode tests */
108
109static inline int is_geode_gx(void) 17static inline int is_geode_gx(void)
110{ 18{
111 return ((boot_cpu_data.x86_vendor == X86_VENDOR_NSC) && 19 return ((boot_cpu_data.x86_vendor == X86_VENDOR_NSC) &&
@@ -125,29 +33,4 @@ static inline int is_geode(void)
125 return (is_geode_gx() || is_geode_lx()); 33 return (is_geode_gx() || is_geode_lx());
126} 34}
127 35
128static inline void geode_mfgpt_write(int timer, u16 reg, u16 value)
129{
130 u32 base = geode_get_dev_base(GEODE_DEV_MFGPT);
131 outw(value, base + reg + (timer * 8));
132}
133
134static inline u16 geode_mfgpt_read(int timer, u16 reg)
135{
136 u32 base = geode_get_dev_base(GEODE_DEV_MFGPT);
137 return inw(base + reg + (timer * 8));
138}
139
140extern int geode_mfgpt_toggle_event(int timer, int cmp, int event, int enable);
141extern int geode_mfgpt_set_irq(int timer, int cmp, int *irq, int enable);
142extern int geode_mfgpt_alloc_timer(int timer, int domain);
143
144#define geode_mfgpt_setup_irq(t, c, i) geode_mfgpt_set_irq((t), (c), (i), 1)
145#define geode_mfgpt_release_irq(t, c, i) geode_mfgpt_set_irq((t), (c), (i), 0)
146
147#ifdef CONFIG_GEODE_MFGPT_TIMER
148extern int __init mfgpt_timer_setup(void);
149#else
150static inline int mfgpt_timer_setup(void) { return 0; }
151#endif
152
153#endif /* _ASM_X86_GEODE_H */ 36#endif /* _ASM_X86_GEODE_H */
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 4f2e66e29ecc..d87f09bc5a52 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -89,7 +89,6 @@ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
89obj-$(CONFIG_HPET_TIMER) += hpet.o 89obj-$(CONFIG_HPET_TIMER) += hpet.o
90 90
91obj-$(CONFIG_K8_NB) += k8.o 91obj-$(CONFIG_K8_NB) += k8.o
92obj-$(CONFIG_MGEODE_LX) += geode_32.o mfgpt_32.o
93obj-$(CONFIG_DEBUG_RODATA_TEST) += test_rodata.o 92obj-$(CONFIG_DEBUG_RODATA_TEST) += test_rodata.o
94obj-$(CONFIG_DEBUG_NX_TEST) += test_nx.o 93obj-$(CONFIG_DEBUG_NX_TEST) += test_nx.o
95 94
diff --git a/arch/x86/kernel/geode_32.c b/arch/x86/kernel/geode_32.c
deleted file mode 100644
index 9dad6ca6cd70..000000000000
--- a/arch/x86/kernel/geode_32.c
+++ /dev/null
@@ -1,174 +0,0 @@
1/*
2 * AMD Geode southbridge support code
3 * Copyright (C) 2006, Advanced Micro Devices, Inc.
4 * Copyright (C) 2007, Andres Salomon <dilinger@debian.org>
5 *
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of version 2 of the GNU General Public License
8 * as published by the Free Software Foundation.
9 */
10
11#include <linux/kernel.h>
12#include <linux/module.h>
13#include <linux/ioport.h>
14#include <linux/io.h>
15#include <asm/msr.h>
16#include <asm/geode.h>
17
18static struct {
19 char *name;
20 u32 msr;
21 int size;
22 u32 base;
23} lbars[] = {
24 { "geode-pms", MSR_LBAR_PMS, LBAR_PMS_SIZE, 0 },
25 { "geode-acpi", MSR_LBAR_ACPI, LBAR_ACPI_SIZE, 0 },
26 { "geode-gpio", MSR_LBAR_GPIO, LBAR_GPIO_SIZE, 0 },
27 { "geode-mfgpt", MSR_LBAR_MFGPT, LBAR_MFGPT_SIZE, 0 }
28};
29
30static void __init init_lbars(void)
31{
32 u32 lo, hi;
33 int i;
34
35 for (i = 0; i < ARRAY_SIZE(lbars); i++) {
36 rdmsr(lbars[i].msr, lo, hi);
37 if (hi & 0x01)
38 lbars[i].base = lo & 0x0000ffff;
39
40 if (lbars[i].base == 0)
41 printk(KERN_ERR "geode: Couldn't initialize '%s'\n",
42 lbars[i].name);
43 }
44}
45
46int geode_get_dev_base(unsigned int dev)
47{
48 BUG_ON(dev >= ARRAY_SIZE(lbars));
49 return lbars[dev].base;
50}
51EXPORT_SYMBOL_GPL(geode_get_dev_base);
52
53/* === GPIO API === */
54
55void geode_gpio_set(u32 gpio, unsigned int reg)
56{
57 u32 base = geode_get_dev_base(GEODE_DEV_GPIO);
58
59 if (!base)
60 return;
61
62 /* low bank register */
63 if (gpio & 0xFFFF)
64 outl(gpio & 0xFFFF, base + reg);
65 /* high bank register */
66 gpio >>= 16;
67 if (gpio)
68 outl(gpio, base + 0x80 + reg);
69}
70EXPORT_SYMBOL_GPL(geode_gpio_set);
71
72void geode_gpio_clear(u32 gpio, unsigned int reg)
73{
74 u32 base = geode_get_dev_base(GEODE_DEV_GPIO);
75
76 if (!base)
77 return;
78
79 /* low bank register */
80 if (gpio & 0xFFFF)
81 outl((gpio & 0xFFFF) << 16, base + reg);
82 /* high bank register */
83 gpio &= (0xFFFF << 16);
84 if (gpio)
85 outl(gpio, base + 0x80 + reg);
86}
87EXPORT_SYMBOL_GPL(geode_gpio_clear);
88
89int geode_gpio_isset(u32 gpio, unsigned int reg)
90{
91 u32 base = geode_get_dev_base(GEODE_DEV_GPIO);
92 u32 val;
93
94 if (!base)
95 return 0;
96
97 /* low bank register */
98 if (gpio & 0xFFFF) {
99 val = inl(base + reg) & (gpio & 0xFFFF);
100 if ((gpio & 0xFFFF) == val)
101 return 1;
102 }
103 /* high bank register */
104 gpio >>= 16;
105 if (gpio) {
106 val = inl(base + 0x80 + reg) & gpio;
107 if (gpio == val)
108 return 1;
109 }
110 return 0;
111}
112EXPORT_SYMBOL_GPL(geode_gpio_isset);
113
114void geode_gpio_set_irq(unsigned int group, unsigned int irq)
115{
116 u32 lo, hi;
117
118 if (group > 7 || irq > 15)
119 return;
120
121 rdmsr(MSR_PIC_ZSEL_HIGH, lo, hi);
122
123 lo &= ~(0xF << (group * 4));
124 lo |= (irq & 0xF) << (group * 4);
125
126 wrmsr(MSR_PIC_ZSEL_HIGH, lo, hi);
127}
128EXPORT_SYMBOL_GPL(geode_gpio_set_irq);
129
130void geode_gpio_setup_event(unsigned int gpio, int pair, int pme)
131{
132 u32 base = geode_get_dev_base(GEODE_DEV_GPIO);
133 u32 offset, shift, val;
134
135 if (gpio >= 24)
136 offset = GPIO_MAP_W;
137 else if (gpio >= 16)
138 offset = GPIO_MAP_Z;
139 else if (gpio >= 8)
140 offset = GPIO_MAP_Y;
141 else
142 offset = GPIO_MAP_X;
143
144 shift = (gpio % 8) * 4;
145
146 val = inl(base + offset);
147
148 /* Clear whatever was there before */
149 val &= ~(0xF << shift);
150
151 /* And set the new value */
152
153 val |= ((pair & 7) << shift);
154
155 /* Set the PME bit if this is a PME event */
156
157 if (pme)
158 val |= (1 << (shift + 3));
159
160 outl(val, base + offset);
161}
162EXPORT_SYMBOL_GPL(geode_gpio_setup_event);
163
164static int __init geode_southbridge_init(void)
165{
166 if (!is_geode())
167 return -ENODEV;
168
169 init_lbars();
170 (void) mfgpt_timer_setup();
171 return 0;
172}
173
174postcore_initcall(geode_southbridge_init);
diff --git a/arch/x86/kernel/mfgpt_32.c b/arch/x86/kernel/mfgpt_32.c
deleted file mode 100644
index 2a62d843f015..000000000000
--- a/arch/x86/kernel/mfgpt_32.c
+++ /dev/null
@@ -1,410 +0,0 @@
1/*
2 * Driver/API for AMD Geode Multi-Function General Purpose Timers (MFGPT)
3 *
4 * Copyright (C) 2006, Advanced Micro Devices, Inc.
5 * Copyright (C) 2007, Andres Salomon <dilinger@debian.org>
6 *
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of version 2 of the GNU General Public License
9 * as published by the Free Software Foundation.
10 *
11 * The MFGPTs are documented in AMD Geode CS5536 Companion Device Data Book.
12 */
13
14/*
15 * We are using the 32.768kHz input clock - it's the only one that has the
16 * ranges we find desirable. The following table lists the suitable
17 * divisors and the associated Hz, minimum interval and the maximum interval:
18 *
19 * Divisor Hz Min Delta (s) Max Delta (s)
20 * 1 32768 .00048828125 2.000
21 * 2 16384 .0009765625 4.000
22 * 4 8192 .001953125 8.000
23 * 8 4096 .00390625 16.000
24 * 16 2048 .0078125 32.000
25 * 32 1024 .015625 64.000
26 * 64 512 .03125 128.000
27 * 128 256 .0625 256.000
28 * 256 128 .125 512.000
29 */
30
31#include <linux/kernel.h>
32#include <linux/interrupt.h>
33#include <linux/module.h>
34#include <asm/geode.h>
35
36#define MFGPT_DEFAULT_IRQ 7
37
38static struct mfgpt_timer_t {
39 unsigned int avail:1;
40} mfgpt_timers[MFGPT_MAX_TIMERS];
41
42/* Selected from the table above */
43
44#define MFGPT_DIVISOR 16
45#define MFGPT_SCALE 4 /* divisor = 2^(scale) */
46#define MFGPT_HZ (32768 / MFGPT_DIVISOR)
47#define MFGPT_PERIODIC (MFGPT_HZ / HZ)
48
49/* Allow for disabling of MFGPTs */
50static int disable;
51static int __init mfgpt_disable(char *s)
52{
53 disable = 1;
54 return 1;
55}
56__setup("nomfgpt", mfgpt_disable);
57
58/* Reset the MFGPT timers. This is required by some broken BIOSes which already
59 * do the same and leave the system in an unstable state. TinyBIOS 0.98 is
60 * affected at least (0.99 is OK with MFGPT workaround left to off).
61 */
62static int __init mfgpt_fix(char *s)
63{
64 u32 val, dummy;
65
66 /* The following udocumented bit resets the MFGPT timers */
67 val = 0xFF; dummy = 0;
68 wrmsr(MSR_MFGPT_SETUP, val, dummy);
69 return 1;
70}
71__setup("mfgptfix", mfgpt_fix);
72
73/*
74 * Check whether any MFGPTs are available for the kernel to use. In most
75 * cases, firmware that uses AMD's VSA code will claim all timers during
76 * bootup; we certainly don't want to take them if they're already in use.
77 * In other cases (such as with VSAless OpenFirmware), the system firmware
78 * leaves timers available for us to use.
79 */
80
81
82static int timers = -1;
83
84static void geode_mfgpt_detect(void)
85{
86 int i;
87 u16 val;
88
89 timers = 0;
90
91 if (disable) {
92 printk(KERN_INFO "geode-mfgpt: MFGPT support is disabled\n");
93 goto done;
94 }
95
96 if (!geode_get_dev_base(GEODE_DEV_MFGPT)) {
97 printk(KERN_INFO "geode-mfgpt: MFGPT LBAR is not set up\n");
98 goto done;
99 }
100
101 for (i = 0; i < MFGPT_MAX_TIMERS; i++) {
102 val = geode_mfgpt_read(i, MFGPT_REG_SETUP);
103 if (!(val & MFGPT_SETUP_SETUP)) {
104 mfgpt_timers[i].avail = 1;
105 timers++;
106 }
107 }
108
109done:
110 printk(KERN_INFO "geode-mfgpt: %d MFGPT timers available.\n", timers);
111}
112
113int geode_mfgpt_toggle_event(int timer, int cmp, int event, int enable)
114{
115 u32 msr, mask, value, dummy;
116 int shift = (cmp == MFGPT_CMP1) ? 0 : 8;
117
118 if (timer < 0 || timer >= MFGPT_MAX_TIMERS)
119 return -EIO;
120
121 /*
122 * The register maps for these are described in sections 6.17.1.x of
123 * the AMD Geode CS5536 Companion Device Data Book.
124 */
125 switch (event) {
126 case MFGPT_EVENT_RESET:
127 /*
128 * XXX: According to the docs, we cannot reset timers above
129 * 6; that is, resets for 7 and 8 will be ignored. Is this
130 * a problem? -dilinger
131 */
132 msr = MSR_MFGPT_NR;
133 mask = 1 << (timer + 24);
134 break;
135
136 case MFGPT_EVENT_NMI:
137 msr = MSR_MFGPT_NR;
138 mask = 1 << (timer + shift);
139 break;
140
141 case MFGPT_EVENT_IRQ:
142 msr = MSR_MFGPT_IRQ;
143 mask = 1 << (timer + shift);
144 break;
145
146 default:
147 return -EIO;
148 }
149
150 rdmsr(msr, value, dummy);
151
152 if (enable)
153 value |= mask;
154 else
155 value &= ~mask;
156
157 wrmsr(msr, value, dummy);
158 return 0;
159}
160EXPORT_SYMBOL_GPL(geode_mfgpt_toggle_event);
161
162int geode_mfgpt_set_irq(int timer, int cmp, int *irq, int enable)
163{
164 u32 zsel, lpc, dummy;
165 int shift;
166
167 if (timer < 0 || timer >= MFGPT_MAX_TIMERS)
168 return -EIO;
169
170 /*
171 * Unfortunately, MFGPTs come in pairs sharing their IRQ lines. If VSA
172 * is using the same CMP of the timer's Siamese twin, the IRQ is set to
173 * 2, and we mustn't use nor change it.
174 * XXX: Likewise, 2 Linux drivers might clash if the 2nd overwrites the
175 * IRQ of the 1st. This can only happen if forcing an IRQ, calling this
176 * with *irq==0 is safe. Currently there _are_ no 2 drivers.
177 */
178 rdmsr(MSR_PIC_ZSEL_LOW, zsel, dummy);
179 shift = ((cmp == MFGPT_CMP1 ? 0 : 4) + timer % 4) * 4;
180 if (((zsel >> shift) & 0xF) == 2)
181 return -EIO;
182
183 /* Choose IRQ: if none supplied, keep IRQ already set or use default */
184 if (!*irq)
185 *irq = (zsel >> shift) & 0xF;
186 if (!*irq)
187 *irq = MFGPT_DEFAULT_IRQ;
188
189 /* Can't use IRQ if it's 0 (=disabled), 2, or routed to LPC */
190 if (*irq < 1 || *irq == 2 || *irq > 15)
191 return -EIO;
192 rdmsr(MSR_PIC_IRQM_LPC, lpc, dummy);
193 if (lpc & (1 << *irq))
194 return -EIO;
195
196 /* All chosen and checked - go for it */
197 if (geode_mfgpt_toggle_event(timer, cmp, MFGPT_EVENT_IRQ, enable))
198 return -EIO;
199 if (enable) {
200 zsel = (zsel & ~(0xF << shift)) | (*irq << shift);
201 wrmsr(MSR_PIC_ZSEL_LOW, zsel, dummy);
202 }
203
204 return 0;
205}
206
207static int mfgpt_get(int timer)
208{
209 mfgpt_timers[timer].avail = 0;
210 printk(KERN_INFO "geode-mfgpt: Registered timer %d\n", timer);
211 return timer;
212}
213
214int geode_mfgpt_alloc_timer(int timer, int domain)
215{
216 int i;
217
218 if (timers == -1) {
219 /* timers haven't been detected yet */
220 geode_mfgpt_detect();
221 }
222
223 if (!timers)
224 return -1;
225
226 if (timer >= MFGPT_MAX_TIMERS)
227 return -1;
228
229 if (timer < 0) {
230 /* Try to find an available timer */
231 for (i = 0; i < MFGPT_MAX_TIMERS; i++) {
232 if (mfgpt_timers[i].avail)
233 return mfgpt_get(i);
234
235 if (i == 5 && domain == MFGPT_DOMAIN_WORKING)
236 break;
237 }
238 } else {
239 /* If they requested a specific timer, try to honor that */
240 if (mfgpt_timers[timer].avail)
241 return mfgpt_get(timer);
242 }
243
244 /* No timers available - too bad */
245 return -1;
246}
247EXPORT_SYMBOL_GPL(geode_mfgpt_alloc_timer);
248
249
250#ifdef CONFIG_GEODE_MFGPT_TIMER
251
252/*
253 * The MFPGT timers on the CS5536 provide us with suitable timers to use
254 * as clock event sources - not as good as a HPET or APIC, but certainly
255 * better than the PIT. This isn't a general purpose MFGPT driver, but
256 * a simplified one designed specifically to act as a clock event source.
257 * For full details about the MFGPT, please consult the CS5536 data sheet.
258 */
259
260#include <linux/clocksource.h>
261#include <linux/clockchips.h>
262
263static unsigned int mfgpt_tick_mode = CLOCK_EVT_MODE_SHUTDOWN;
264static u16 mfgpt_event_clock;
265
266static int irq;
267static int __init mfgpt_setup(char *str)
268{
269 get_option(&str, &irq);
270 return 1;
271}
272__setup("mfgpt_irq=", mfgpt_setup);
273
274static void mfgpt_disable_timer(u16 clock)
275{
276 /* avoid races by clearing CMP1 and CMP2 unconditionally */
277 geode_mfgpt_write(clock, MFGPT_REG_SETUP, (u16) ~MFGPT_SETUP_CNTEN |
278 MFGPT_SETUP_CMP1 | MFGPT_SETUP_CMP2);
279}
280
281static int mfgpt_next_event(unsigned long, struct clock_event_device *);
282static void mfgpt_set_mode(enum clock_event_mode, struct clock_event_device *);
283
284static struct clock_event_device mfgpt_clockevent = {
285 .name = "mfgpt-timer",
286 .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
287 .set_mode = mfgpt_set_mode,
288 .set_next_event = mfgpt_next_event,
289 .rating = 250,
290 .cpumask = cpu_all_mask,
291 .shift = 32
292};
293
294static void mfgpt_start_timer(u16 delta)
295{
296 geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_CMP2, (u16) delta);
297 geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_COUNTER, 0);
298
299 geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_SETUP,
300 MFGPT_SETUP_CNTEN | MFGPT_SETUP_CMP2);
301}
302
303static void mfgpt_set_mode(enum clock_event_mode mode,
304 struct clock_event_device *evt)
305{
306 mfgpt_disable_timer(mfgpt_event_clock);
307
308 if (mode == CLOCK_EVT_MODE_PERIODIC)
309 mfgpt_start_timer(MFGPT_PERIODIC);
310
311 mfgpt_tick_mode = mode;
312}
313
314static int mfgpt_next_event(unsigned long delta, struct clock_event_device *evt)
315{
316 mfgpt_start_timer(delta);
317 return 0;
318}
319
320static irqreturn_t mfgpt_tick(int irq, void *dev_id)
321{
322 u16 val = geode_mfgpt_read(mfgpt_event_clock, MFGPT_REG_SETUP);
323
324 /* See if the interrupt was for us */
325 if (!(val & (MFGPT_SETUP_SETUP | MFGPT_SETUP_CMP2 | MFGPT_SETUP_CMP1)))
326 return IRQ_NONE;
327
328 /* Turn off the clock (and clear the event) */
329 mfgpt_disable_timer(mfgpt_event_clock);
330
331 if (mfgpt_tick_mode == CLOCK_EVT_MODE_SHUTDOWN)
332 return IRQ_HANDLED;
333
334 /* Clear the counter */
335 geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_COUNTER, 0);
336
337 /* Restart the clock in periodic mode */
338
339 if (mfgpt_tick_mode == CLOCK_EVT_MODE_PERIODIC) {
340 geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_SETUP,
341 MFGPT_SETUP_CNTEN | MFGPT_SETUP_CMP2);
342 }
343
344 mfgpt_clockevent.event_handler(&mfgpt_clockevent);
345 return IRQ_HANDLED;
346}
347
348static struct irqaction mfgptirq = {
349 .handler = mfgpt_tick,
350 .flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_TIMER,
351 .name = "mfgpt-timer"
352};
353
354int __init mfgpt_timer_setup(void)
355{
356 int timer, ret;
357 u16 val;
358
359 timer = geode_mfgpt_alloc_timer(MFGPT_TIMER_ANY, MFGPT_DOMAIN_WORKING);
360 if (timer < 0) {
361 printk(KERN_ERR
362 "mfgpt-timer: Could not allocate a MFPGT timer\n");
363 return -ENODEV;
364 }
365
366 mfgpt_event_clock = timer;
367
368 /* Set up the IRQ on the MFGPT side */
369 if (geode_mfgpt_setup_irq(mfgpt_event_clock, MFGPT_CMP2, &irq)) {
370 printk(KERN_ERR "mfgpt-timer: Could not set up IRQ %d\n", irq);
371 return -EIO;
372 }
373
374 /* And register it with the kernel */
375 ret = setup_irq(irq, &mfgptirq);
376
377 if (ret) {
378 printk(KERN_ERR
379 "mfgpt-timer: Unable to set up the interrupt.\n");
380 goto err;
381 }
382
383 /* Set the clock scale and enable the event mode for CMP2 */
384 val = MFGPT_SCALE | (3 << 8);
385
386 geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_SETUP, val);
387
388 /* Set up the clock event */
389 mfgpt_clockevent.mult = div_sc(MFGPT_HZ, NSEC_PER_SEC,
390 mfgpt_clockevent.shift);
391 mfgpt_clockevent.min_delta_ns = clockevent_delta2ns(0xF,
392 &mfgpt_clockevent);
393 mfgpt_clockevent.max_delta_ns = clockevent_delta2ns(0xFFFE,
394 &mfgpt_clockevent);
395
396 printk(KERN_INFO
397 "mfgpt-timer: Registering MFGPT timer %d as a clock event, using IRQ %d\n",
398 timer, irq);
399 clockevents_register_device(&mfgpt_clockevent);
400
401 return 0;
402
403err:
404 geode_mfgpt_release_irq(mfgpt_event_clock, MFGPT_CMP2, &irq);
405 printk(KERN_ERR
406 "mfgpt-timer: Unable to set up the MFGPT clock source\n");
407 return -EIO;
408}
409
410#endif
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index df4b82d1348e..57ca339924ef 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -176,7 +176,7 @@ comment "PCI GPIO expanders:"
176 176
177config GPIO_CS5535 177config GPIO_CS5535
178 tristate "AMD CS5535/CS5536 GPIO support" 178 tristate "AMD CS5535/CS5536 GPIO support"
179 depends on PCI && !CS5535_GPIO && !MGEODE_LX 179 depends on PCI && !CS5535_GPIO
180 help 180 help
181 The AMD CS5535 and CS5536 southbridges support 28 GPIO pins that 181 The AMD CS5535 and CS5536 southbridges support 28 GPIO pins that
182 can be used for quite a number of things. The CS5535/6 is found on 182 can be used for quite a number of things. The CS5535/6 is found on
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index d6d6d846f0d6..59f4ba1b7034 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -189,7 +189,7 @@ config SGI_XP
189 189
190config CS5535_MFGPT 190config CS5535_MFGPT
191 tristate "CS5535/CS5536 Geode Multi-Function General Purpose Timer (MFGPT) support" 191 tristate "CS5535/CS5536 Geode Multi-Function General Purpose Timer (MFGPT) support"
192 depends on PCI && !MGEODE_LX 192 depends on PCI
193 depends on X86 193 depends on X86
194 default n 194 default n
195 help 195 help
generated by cgit v1.2.2 (git 2.25.0) at 2025-01-01 22:07:38 -0500