aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/hwmon/Kconfig12
-rw-r--r--drivers/hwmon/Makefile1
-rw-r--r--drivers/hwmon/dme1737.c2080
3 files changed, 2093 insertions, 0 deletions
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 13eea47dceb3..f848e343b6ab 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -442,6 +442,18 @@ config SENSORS_SIS5595
442 This driver can also be built as a module. If so, the module 442 This driver can also be built as a module. If so, the module
443 will be called sis5595. 443 will be called sis5595.
444 444
445config SENSORS_DME1737
446 tristate "SMSC DME1737 and compatibles"
447 depends on I2C && EXPERIMENTAL
448 select HWMON_VID
449 help
450 If you say yes here you get support for the hardware monitoring
451 and fan control features of the SMSC DME1737 (and compatibles
452 like the Asus A8000) Super-I/O chip.
453
454 This driver can also be built as a module. If so, the module
455 will be called dme1737.
456
445config SENSORS_SMSC47M1 457config SENSORS_SMSC47M1
446 tristate "SMSC LPC47M10x and compatibles" 458 tristate "SMSC LPC47M10x and compatibles"
447 help 459 help
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index cfaf338919dd..3618773bf4d6 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -25,6 +25,7 @@ obj-$(CONFIG_SENSORS_APPLESMC) += applesmc.o
25obj-$(CONFIG_SENSORS_AMS) += ams/ 25obj-$(CONFIG_SENSORS_AMS) += ams/
26obj-$(CONFIG_SENSORS_ATXP1) += atxp1.o 26obj-$(CONFIG_SENSORS_ATXP1) += atxp1.o
27obj-$(CONFIG_SENSORS_CORETEMP) += coretemp.o 27obj-$(CONFIG_SENSORS_CORETEMP) += coretemp.o
28obj-$(CONFIG_SENSORS_DME1737) += dme1737.o
28obj-$(CONFIG_SENSORS_DS1621) += ds1621.o 29obj-$(CONFIG_SENSORS_DS1621) += ds1621.o
29obj-$(CONFIG_SENSORS_F71805F) += f71805f.o 30obj-$(CONFIG_SENSORS_F71805F) += f71805f.o
30obj-$(CONFIG_SENSORS_FSCHER) += fscher.o 31obj-$(CONFIG_SENSORS_FSCHER) += fscher.o
diff --git a/drivers/hwmon/dme1737.c b/drivers/hwmon/dme1737.c
new file mode 100644
index 000000000000..be3aaa5d0b91
--- /dev/null
+++ b/drivers/hwmon/dme1737.c
@@ -0,0 +1,2080 @@
1/*
2 * dme1737.c - driver for the SMSC DME1737 and Asus A8000 Super-I/O chips
3 * integrated hardware monitoring features.
4 * Copyright (c) 2007 Juerg Haefliger <juergh@gmail.com>
5 *
6 * This driver is based on the LM85 driver. The hardware monitoring
7 * capabilities of the DME1737 are very similar to the LM85 with some
8 * additional features. Even though the DME1737 is a Super-I/O chip, the
9 * hardware monitoring registers are only accessible via SMBus.
10 *
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License as published by
13 * the Free Software Foundation; either version 2 of the License, or
14 * (at your option) any later version.
15 *
16 * This program is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
20 *
21 * You should have received a copy of the GNU General Public License
22 * along with this program; if not, write to the Free Software
23 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
24 */
25
26#include <linux/module.h>
27#include <linux/init.h>
28#include <linux/slab.h>
29#include <linux/jiffies.h>
30#include <linux/i2c.h>
31#include <linux/hwmon.h>
32#include <linux/hwmon-sysfs.h>
33#include <linux/hwmon-vid.h>
34#include <linux/err.h>
35#include <linux/mutex.h>
36#include <asm/io.h>
37
38/* Module load parameters */
39static int force_start;
40module_param(force_start, bool, 0);
41MODULE_PARM_DESC(force_start, "Force the chip to start monitoring inputs");
42
43/* Addresses to scan */
44static unsigned short normal_i2c[] = {0x2c, 0x2d, 0x2e, I2C_CLIENT_END};
45
46/* Insmod parameters */
47I2C_CLIENT_INSMOD_1(dme1737);
48
49/* ---------------------------------------------------------------------
50 * Registers
51 *
52 * The sensors are defined as follows:
53 *
54 * Voltages Temperatures
55 * -------- ------------
56 * in0 +5VTR (+5V stdby) temp1 Remote diode 1
57 * in1 Vccp (proc core) temp2 Internal temp
58 * in2 VCC (internal +3.3V) temp3 Remote diode 2
59 * in3 +5V
60 * in4 +12V
61 * in5 VTR (+3.3V stby)
62 * in6 Vbat
63 *
64 * --------------------------------------------------------------------- */
65
66/* Voltages (in) numbered 0-6 (ix) */
67#define DME1737_REG_IN(ix) ((ix) < 5 ? 0x20 + (ix) \
68 : 0x94 + (ix))
69#define DME1737_REG_IN_MIN(ix) ((ix) < 5 ? 0x44 + (ix) * 2 \
70 : 0x91 + (ix) * 2)
71#define DME1737_REG_IN_MAX(ix) ((ix) < 5 ? 0x45 + (ix) * 2 \
72 : 0x92 + (ix) * 2)
73
74/* Temperatures (temp) numbered 0-2 (ix) */
75#define DME1737_REG_TEMP(ix) (0x25 + (ix))
76#define DME1737_REG_TEMP_MIN(ix) (0x4e + (ix) * 2)
77#define DME1737_REG_TEMP_MAX(ix) (0x4f + (ix) * 2)
78#define DME1737_REG_TEMP_OFFSET(ix) ((ix) == 0 ? 0x1f \
79 : 0x1c + (ix))
80
81/* Voltage and temperature LSBs
82 * The LSBs (4 bits each) are stored in 5 registers with the following layouts:
83 * IN_TEMP_LSB(0) = [in5, in6]
84 * IN_TEMP_LSB(1) = [temp3, temp1]
85 * IN_TEMP_LSB(2) = [in4, temp2]
86 * IN_TEMP_LSB(3) = [in3, in0]
87 * IN_TEMP_LSB(4) = [in2, in1] */
88#define DME1737_REG_IN_TEMP_LSB(ix) (0x84 + (ix))
89static const u8 DME1737_REG_IN_LSB[] = {3, 4, 4, 3, 2, 0, 0};
90static const u8 DME1737_REG_IN_LSB_SHL[] = {4, 4, 0, 0, 0, 0, 4};
91static const u8 DME1737_REG_TEMP_LSB[] = {1, 2, 1};
92static const u8 DME1737_REG_TEMP_LSB_SHL[] = {4, 4, 0};
93
94/* Fans numbered 0-5 (ix) */
95#define DME1737_REG_FAN(ix) ((ix) < 4 ? 0x28 + (ix) * 2 \
96 : 0xa1 + (ix) * 2)
97#define DME1737_REG_FAN_MIN(ix) ((ix) < 4 ? 0x54 + (ix) * 2 \
98 : 0xa5 + (ix) * 2)
99#define DME1737_REG_FAN_OPT(ix) ((ix) < 4 ? 0x90 + (ix) \
100 : 0xb2 + (ix))
101#define DME1737_REG_FAN_MAX(ix) (0xb4 + (ix)) /* only for fan[4-5] */
102
103/* PWMs numbered 0-2, 4-5 (ix) */
104#define DME1737_REG_PWM(ix) ((ix) < 3 ? 0x30 + (ix) \
105 : 0xa1 + (ix))
106#define DME1737_REG_PWM_CONFIG(ix) (0x5c + (ix)) /* only for pwm[0-2] */
107#define DME1737_REG_PWM_MIN(ix) (0x64 + (ix)) /* only for pwm[0-2] */
108#define DME1737_REG_PWM_FREQ(ix) ((ix) < 3 ? 0x5f + (ix) \
109 : 0xa3 + (ix))
110/* The layout of the ramp rate registers is different from the other pwm
111 * registers. The bits for the 3 PWMs are stored in 2 registers:
112 * PWM_RR(0) = [OFF3, OFF2, OFF1, RES, RR1E, RR1-2, RR1-1, RR1-0]
113 * PWM_RR(1) = [RR2E, RR2-2, RR2-1, RR2-0, RR3E, RR3-2, RR3-1, RR3-0] */
114#define DME1737_REG_PWM_RR(ix) (0x62 + (ix)) /* only for pwm[0-2] */
115
116/* Thermal zones 0-2 */
117#define DME1737_REG_ZONE_LOW(ix) (0x67 + (ix))
118#define DME1737_REG_ZONE_ABS(ix) (0x6a + (ix))
119/* The layout of the hysteresis registers is different from the other zone
120 * registers. The bits for the 3 zones are stored in 2 registers:
121 * ZONE_HYST(0) = [H1-3, H1-2, H1-1, H1-0, H2-3, H2-2, H2-1, H2-0]
122 * ZONE_HYST(1) = [H3-3, H3-2, H3-1, H3-0, RES, RES, RES, RES] */
123#define DME1737_REG_ZONE_HYST(ix) (0x6d + (ix))
124
125/* Alarm registers and bit mapping
126 * The 3 8-bit alarm registers will be concatenated to a single 32-bit
127 * alarm value [0, ALARM3, ALARM2, ALARM1]. */
128#define DME1737_REG_ALARM1 0x41
129#define DME1737_REG_ALARM2 0x42
130#define DME1737_REG_ALARM3 0x83
131static const u8 DME1737_BIT_ALARM_IN[] = {0, 1, 2, 3, 8, 16, 17};
132static const u8 DME1737_BIT_ALARM_TEMP[] = {4, 5, 6};
133static const u8 DME1737_BIT_ALARM_FAN[] = {10, 11, 12, 13, 22, 23};
134
135/* Miscellaneous registers */
136#define DME1737_REG_COMPANY 0x3e
137#define DME1737_REG_VERSTEP 0x3f
138#define DME1737_REG_CONFIG 0x40
139#define DME1737_REG_CONFIG2 0x7f
140#define DME1737_REG_VID 0x43
141#define DME1737_REG_TACH_PWM 0x81
142
143/* ---------------------------------------------------------------------
144 * Misc defines
145 * --------------------------------------------------------------------- */
146
147/* Chip identification */
148#define DME1737_COMPANY_SMSC 0x5c
149#define DME1737_VERSTEP 0x88
150#define DME1737_VERSTEP_MASK 0xf8
151
152/* ---------------------------------------------------------------------
153 * Data structures and manipulation thereof
154 * --------------------------------------------------------------------- */
155
156struct dme1737_data {
157 struct i2c_client client;
158 struct class_device *class_dev;
159
160 struct mutex update_lock;
161 int valid; /* !=0 if following fields are valid */
162 unsigned long last_update; /* in jiffies */
163 unsigned long last_vbat; /* in jiffies */
164
165 u8 vid;
166 u8 pwm_rr_en;
167 u8 has_pwm;
168 u8 has_fan;
169
170 /* Register values */
171 u16 in[7];
172 u8 in_min[7];
173 u8 in_max[7];
174 s16 temp[3];
175 s8 temp_min[3];
176 s8 temp_max[3];
177 s8 temp_offset[3];
178 u8 config;
179 u8 config2;
180 u8 vrm;
181 u16 fan[6];
182 u16 fan_min[6];
183 u8 fan_max[2];
184 u8 fan_opt[6];
185 u8 pwm[6];
186 u8 pwm_min[3];
187 u8 pwm_config[3];
188 u8 pwm_acz[3];
189 u8 pwm_freq[6];
190 u8 pwm_rr[2];
191 u8 zone_low[3];
192 u8 zone_abs[3];
193 u8 zone_hyst[2];
194 u32 alarms;
195};
196
197/* Nominal voltage values */
198static const int IN_NOMINAL[] = {5000, 2250, 3300, 5000, 12000, 3300, 3300};
199
200/* Voltage input
201 * Voltage inputs have 16 bits resolution, limit values have 8 bits
202 * resolution. */
203static inline int IN_FROM_REG(int reg, int ix, int res)
204{
205 return (reg * IN_NOMINAL[ix] + (3 << (res - 3))) / (3 << (res - 2));
206}
207
208static inline int IN_TO_REG(int val, int ix)
209{
210 return SENSORS_LIMIT((val * 192 + IN_NOMINAL[ix] / 2) /
211 IN_NOMINAL[ix], 0, 255);
212}
213
214/* Temperature input
215 * The register values represent temperatures in 2's complement notation from
216 * -127 degrees C to +127 degrees C. Temp inputs have 16 bits resolution, limit
217 * values have 8 bits resolution. */
218static inline int TEMP_FROM_REG(int reg, int res)
219{
220 return (reg * 1000) >> (res - 8);
221}
222
223static inline int TEMP_TO_REG(int val)
224{
225 return SENSORS_LIMIT((val < 0 ? val - 500 : val + 500) / 1000,
226 -128, 127);
227}
228
229/* Temperature range */
230static const int TEMP_RANGE[] = {2000, 2500, 3333, 4000, 5000, 6666, 8000,
231 10000, 13333, 16000, 20000, 26666, 32000,
232 40000, 53333, 80000};
233
234static inline int TEMP_RANGE_FROM_REG(int reg)
235{
236 return TEMP_RANGE[(reg >> 4) & 0x0f];
237}
238
239static int TEMP_RANGE_TO_REG(int val, int reg)
240{
241 int i;
242
243 for (i = 15; i > 0; i--) {
244 if (val > (TEMP_RANGE[i] + TEMP_RANGE[i - 1] + 1) / 2) {
245 break;
246 }
247 }
248
249 return (reg & 0x0f) | (i << 4);
250}
251
252/* Temperature hysteresis
253 * Register layout:
254 * reg[0] = [H1-3, H1-2, H1-1, H1-0, H2-3, H2-2, H2-1, H2-0]
255 * reg[1] = [H3-3, H3-2, H3-1, H3-0, xxxx, xxxx, xxxx, xxxx] */
256static inline int TEMP_HYST_FROM_REG(int reg, int ix)
257{
258 return (((ix == 1) ? reg : reg >> 4) & 0x0f) * 1000;
259}
260
261static inline int TEMP_HYST_TO_REG(int val, int ix, int reg)
262{
263 int hyst = SENSORS_LIMIT((val + 500) / 1000, 0, 15);
264
265 return (ix == 1) ? (reg & 0xf0) | hyst : (reg & 0x0f) | (hyst << 4);
266}
267
268/* Fan input RPM */
269static inline int FAN_FROM_REG(int reg, int tpc)
270{
271 return (reg == 0 || reg == 0xffff) ? 0 :
272 (tpc == 0) ? 90000 * 60 / reg : tpc * reg;
273}
274
275static inline int FAN_TO_REG(int val, int tpc)
276{
277 return SENSORS_LIMIT((tpc == 0) ? 90000 * 60 / val : val / tpc,
278 0, 0xffff);
279}
280
281/* Fan TPC (tach pulse count)
282 * Converts a register value to a TPC multiplier or returns 0 if the tachometer
283 * is configured in legacy (non-tpc) mode */
284static inline int FAN_TPC_FROM_REG(int reg)
285{
286 return (reg & 0x20) ? 0 : 60 >> (reg & 0x03);
287}
288
289/* Fan type
290 * The type of a fan is expressed in number of pulses-per-revolution that it
291 * emits */
292static inline int FAN_TYPE_FROM_REG(int reg)
293{
294 int edge = (reg >> 1) & 0x03;
295
296 return (edge > 0) ? 1 << (edge - 1) : 0;
297}
298
299static inline int FAN_TYPE_TO_REG(int val, int reg)
300{
301 int edge = (val == 4) ? 3 : val;
302
303 return (reg & 0xf9) | (edge << 1);
304}
305
306/* Fan max RPM */
307static const int FAN_MAX[] = {0x54, 0x38, 0x2a, 0x21, 0x1c, 0x18, 0x15, 0x12,
308 0x11, 0x0f, 0x0e};
309
310static int FAN_MAX_FROM_REG(int reg)
311{
312 int i;
313
314 for (i = 10; i > 0; i--) {
315 if (reg == FAN_MAX[i]) {
316 break;
317 }
318 }
319
320 return 1000 + i * 500;
321}
322
323static int FAN_MAX_TO_REG(int val)
324{
325 int i;
326
327 for (i = 10; i > 0; i--) {
328 if (val > (1000 + (i - 1) * 500)) {
329 break;
330 }
331 }
332
333 return FAN_MAX[i];
334}
335
336/* PWM enable
337 * Register to enable mapping:
338 * 000: 2 fan on zone 1 auto
339 * 001: 2 fan on zone 2 auto
340 * 010: 2 fan on zone 3 auto
341 * 011: 0 fan full on
342 * 100: -1 fan disabled
343 * 101: 2 fan on hottest of zones 2,3 auto
344 * 110: 2 fan on hottest of zones 1,2,3 auto
345 * 111: 1 fan in manual mode */
346static inline int PWM_EN_FROM_REG(int reg)
347{
348 static const int en[] = {2, 2, 2, 0, -1, 2, 2, 1};
349
350 return en[(reg >> 5) & 0x07];
351}
352
353static inline int PWM_EN_TO_REG(int val, int reg)
354{
355 int en = (val == 1) ? 7 : 3;
356
357 return (reg & 0x1f) | ((en & 0x07) << 5);
358}
359
360/* PWM auto channels zone
361 * Register to auto channels zone mapping (ACZ is a bitfield with bit x
362 * corresponding to zone x+1):
363 * 000: 001 fan on zone 1 auto
364 * 001: 010 fan on zone 2 auto
365 * 010: 100 fan on zone 3 auto
366 * 011: 000 fan full on
367 * 100: 000 fan disabled
368 * 101: 110 fan on hottest of zones 2,3 auto
369 * 110: 111 fan on hottest of zones 1,2,3 auto
370 * 111: 000 fan in manual mode */
371static inline int PWM_ACZ_FROM_REG(int reg)
372{
373 static const int acz[] = {1, 2, 4, 0, 0, 6, 7, 0};
374
375 return acz[(reg >> 5) & 0x07];
376}
377
378static inline int PWM_ACZ_TO_REG(int val, int reg)
379{
380 int acz = (val == 4) ? 2 : val - 1;
381
382 return (reg & 0x1f) | ((acz & 0x07) << 5);
383}
384
385/* PWM frequency */
386static const int PWM_FREQ[] = {11, 15, 22, 29, 35, 44, 59, 88,
387 15000, 20000, 30000, 25000, 0, 0, 0, 0};
388
389static inline int PWM_FREQ_FROM_REG(int reg)
390{
391 return PWM_FREQ[reg & 0x0f];
392}
393
394static int PWM_FREQ_TO_REG(int val, int reg)
395{
396 int i;
397
398 /* the first two cases are special - stupid chip design! */
399 if (val > 27500) {
400 i = 10;
401 } else if (val > 22500) {
402 i = 11;
403 } else {
404 for (i = 9; i > 0; i--) {
405 if (val > (PWM_FREQ[i] + PWM_FREQ[i - 1] + 1) / 2) {
406 break;
407 }
408 }
409 }
410
411 return (reg & 0xf0) | i;
412}
413
414/* PWM ramp rate
415 * Register layout:
416 * reg[0] = [OFF3, OFF2, OFF1, RES, RR1-E, RR1-2, RR1-1, RR1-0]
417 * reg[1] = [RR2-E, RR2-2, RR2-1, RR2-0, RR3-E, RR3-2, RR3-1, RR3-0] */
418static const u8 PWM_RR[] = {206, 104, 69, 41, 26, 18, 10, 5};
419
420static inline int PWM_RR_FROM_REG(int reg, int ix)
421{
422 int rr = (ix == 1) ? reg >> 4 : reg;
423
424 return (rr & 0x08) ? PWM_RR[rr & 0x07] : 0;
425}
426
427static int PWM_RR_TO_REG(int val, int ix, int reg)
428{
429 int i;
430
431 for (i = 0; i < 7; i++) {
432 if (val > (PWM_RR[i] + PWM_RR[i + 1] + 1) / 2) {
433 break;
434 }
435 }
436
437 return (ix == 1) ? (reg & 0x8f) | (i << 4) : (reg & 0xf8) | i;
438}
439
440/* PWM ramp rate enable */
441static inline int PWM_RR_EN_FROM_REG(int reg, int ix)
442{
443 return PWM_RR_FROM_REG(reg, ix) ? 1 : 0;
444}
445
446static inline int PWM_RR_EN_TO_REG(int val, int ix, int reg)
447{
448 int en = (ix == 1) ? 0x80 : 0x08;
449
450 return val ? reg | en : reg & ~en;
451}
452
453/* PWM min/off
454 * The PWM min/off bits are part of the PMW ramp rate register 0 (see above for
455 * the register layout). */
456static inline int PWM_OFF_FROM_REG(int reg, int ix)
457{
458 return (reg >> (ix + 5)) & 0x01;
459}
460
461static inline int PWM_OFF_TO_REG(int val, int ix, int reg)
462{
463 return (reg & ~(1 << (ix + 5))) | ((val & 0x01) << (ix + 5));
464}
465
466/* ---------------------------------------------------------------------
467 * Device I/O access
468 * --------------------------------------------------------------------- */
469
470static u8 dme1737_read(struct i2c_client *client, u8 reg)
471{
472 s32 val = i2c_smbus_read_byte_data(client, reg);
473
474 if (val < 0) {
475 dev_warn(&client->dev, "Read from register 0x%02x failed! "
476 "Please report to the driver maintainer.\n", reg);
477 }
478
479 return val;
480}
481
482static s32 dme1737_write(struct i2c_client *client, u8 reg, u8 value)
483{
484 s32 res = i2c_smbus_write_byte_data(client, reg, value);
485
486 if (res < 0) {
487 dev_warn(&client->dev, "Write to register 0x%02x failed! "
488 "Please report to the driver maintainer.\n", reg);
489 }
490
491 return res;
492}
493
494static struct dme1737_data *dme1737_update_device(struct device *dev)
495{
496 struct i2c_client *client = to_i2c_client(dev);
497 struct dme1737_data *data = i2c_get_clientdata(client);
498 int ix;
499 u8 lsb[5];
500
501 mutex_lock(&data->update_lock);
502
503 /* Enable a Vbat monitoring cycle every 10 mins */
504 if (time_after(jiffies, data->last_vbat + 600 * HZ) || !data->valid) {
505 dme1737_write(client, DME1737_REG_CONFIG, dme1737_read(client,
506 DME1737_REG_CONFIG) | 0x10);
507 data->last_vbat = jiffies;
508 }
509
510 /* Sample register contents every 1 sec */
511 if (time_after(jiffies, data->last_update + HZ) || !data->valid) {
512 data->vid = dme1737_read(client, DME1737_REG_VID) & 0x3f;
513
514 /* In (voltage) registers */
515 for (ix = 0; ix < ARRAY_SIZE(data->in); ix++) {
516 /* Voltage inputs are stored as 16 bit values even
517 * though they have only 12 bits resolution. This is
518 * to make it consistent with the temp inputs. */
519 data->in[ix] = dme1737_read(client,
520 DME1737_REG_IN(ix)) << 8;
521 data->in_min[ix] = dme1737_read(client,
522 DME1737_REG_IN_MIN(ix));
523 data->in_max[ix] = dme1737_read(client,
524 DME1737_REG_IN_MAX(ix));
525 }
526
527 /* Temp registers */
528 for (ix = 0; ix < ARRAY_SIZE(data->temp); ix++) {
529 /* Temp inputs are stored as 16 bit values even
530 * though they have only 12 bits resolution. This is
531 * to take advantage of implicit conversions between
532 * register values (2's complement) and temp values
533 * (signed decimal). */
534 data->temp[ix] = dme1737_read(client,
535 DME1737_REG_TEMP(ix)) << 8;
536 data->temp_min[ix] = dme1737_read(client,
537 DME1737_REG_TEMP_MIN(ix));
538 data->temp_max[ix] = dme1737_read(client,
539 DME1737_REG_TEMP_MAX(ix));
540 data->temp_offset[ix] = dme1737_read(client,
541 DME1737_REG_TEMP_OFFSET(ix));
542 }
543
544 /* In and temp LSB registers
545 * The LSBs are latched when the MSBs are read, so the order in
546 * which the registers are read (MSB first, then LSB) is
547 * important! */
548 for (ix = 0; ix < ARRAY_SIZE(lsb); ix++) {
549 lsb[ix] = dme1737_read(client,
550 DME1737_REG_IN_TEMP_LSB(ix));
551 }
552 for (ix = 0; ix < ARRAY_SIZE(data->in); ix++) {
553 data->in[ix] |= (lsb[DME1737_REG_IN_LSB[ix]] <<
554 DME1737_REG_IN_LSB_SHL[ix]) & 0xf0;
555 }
556 for (ix = 0; ix < ARRAY_SIZE(data->temp); ix++) {
557 data->temp[ix] |= (lsb[DME1737_REG_TEMP_LSB[ix]] <<
558 DME1737_REG_TEMP_LSB_SHL[ix]) & 0xf0;
559 }
560
561 /* Fan registers */
562 for (ix = 0; ix < ARRAY_SIZE(data->fan); ix++) {
563 /* Skip reading registers if optional fans are not
564 * present */
565 if (!(data->has_fan & (1 << ix))) {
566 continue;
567 }
568 data->fan[ix] = dme1737_read(client,
569 DME1737_REG_FAN(ix));
570 data->fan[ix] |= dme1737_read(client,
571 DME1737_REG_FAN(ix) + 1) << 8;
572 data->fan_min[ix] = dme1737_read(client,
573 DME1737_REG_FAN_MIN(ix));
574 data->fan_min[ix] |= dme1737_read(client,
575 DME1737_REG_FAN_MIN(ix) + 1) << 8;
576 data->fan_opt[ix] = dme1737_read(client,
577 DME1737_REG_FAN_OPT(ix));
578 /* fan_max exists only for fan[5-6] */
579 if (ix > 3) {
580 data->fan_max[ix - 4] = dme1737_read(client,
581 DME1737_REG_FAN_MAX(ix));
582 }
583 }
584
585 /* PWM registers */
586 for (ix = 0; ix < ARRAY_SIZE(data->pwm); ix++) {
587 /* Skip reading registers if optional PWMs are not
588 * present */
589 if (!(data->has_pwm & (1 << ix))) {
590 continue;
591 }
592 data->pwm[ix] = dme1737_read(client,
593 DME1737_REG_PWM(ix));
594 data->pwm_freq[ix] = dme1737_read(client,
595 DME1737_REG_PWM_FREQ(ix));
596 /* pwm_config and pwm_min exist only for pwm[1-3] */
597 if (ix < 3) {
598 data->pwm_config[ix] = dme1737_read(client,
599 DME1737_REG_PWM_CONFIG(ix));
600 data->pwm_min[ix] = dme1737_read(client,
601 DME1737_REG_PWM_MIN(ix));
602 }
603 }
604 for (ix = 0; ix < ARRAY_SIZE(data->pwm_rr); ix++) {
605 data->pwm_rr[ix] = dme1737_read(client,
606 DME1737_REG_PWM_RR(ix));
607 }
608
609 /* Thermal zone registers */
610 for (ix = 0; ix < ARRAY_SIZE(data->zone_low); ix++) {
611 data->zone_low[ix] = dme1737_read(client,
612 DME1737_REG_ZONE_LOW(ix));
613 data->zone_abs[ix] = dme1737_read(client,
614 DME1737_REG_ZONE_ABS(ix));
615 }
616 for (ix = 0; ix < ARRAY_SIZE(data->zone_hyst); ix++) {
617 data->zone_hyst[ix] = dme1737_read(client,
618 DME1737_REG_ZONE_HYST(ix));
619 }
620
621 /* Alarm registers */
622 data->alarms = dme1737_read(client,
623 DME1737_REG_ALARM1);
624 /* Bit 7 tells us if the other alarm registers are non-zero and
625 * therefore also need to be read */
626 if (data->alarms & 0x80) {
627 data->alarms |= dme1737_read(client,
628 DME1737_REG_ALARM2) << 8;
629 data->alarms |= dme1737_read(client,
630 DME1737_REG_ALARM3) << 16;
631 }
632
633 data->last_update = jiffies;
634 data->valid = 1;
635 }
636
637 mutex_unlock(&data->update_lock);
638
639 return data;
640}
641
642/* ---------------------------------------------------------------------
643 * Voltage sysfs attributes
644 * ix = [0-5]
645 * --------------------------------------------------------------------- */
646
647#define SYS_IN_INPUT 0
648#define SYS_IN_MIN 1
649#define SYS_IN_MAX 2
650#define SYS_IN_ALARM 3
651
652static ssize_t show_in(struct device *dev, struct device_attribute *attr,
653 char *buf)
654{
655 struct dme1737_data *data = dme1737_update_device(dev);
656 struct sensor_device_attribute_2
657 *sensor_attr_2 = to_sensor_dev_attr_2(attr);
658 int ix = sensor_attr_2->index;
659 int fn = sensor_attr_2->nr;
660 int res;
661
662 switch (fn) {
663 case SYS_IN_INPUT:
664 res = IN_FROM_REG(data->in[ix], ix, 16);
665 break;
666 case SYS_IN_MIN:
667 res = IN_FROM_REG(data->in_min[ix], ix, 8);
668 break;
669 case SYS_IN_MAX:
670 res = IN_FROM_REG(data->in_max[ix], ix, 8);
671 break;
672 case SYS_IN_ALARM:
673 res = (data->alarms >> DME1737_BIT_ALARM_IN[ix]) & 0x01;
674 break;
675 default:
676 res = 0;
677 dev_dbg(dev, "Unknown attr fetch (%d)\n", fn);
678 }
679
680 return sprintf(buf, "%d\n", res);
681}
682
683static ssize_t set_in(struct device *dev, struct device_attribute *attr,
684 const char *buf, size_t count)
685{
686 struct i2c_client *client = to_i2c_client(dev);
687 struct dme1737_data *data = i2c_get_clientdata(client);
688 struct sensor_device_attribute_2
689 *sensor_attr_2 = to_sensor_dev_attr_2(attr);
690 int ix = sensor_attr_2->index;
691 int fn = sensor_attr_2->nr;
692 long val = simple_strtol(buf, NULL, 10);
693
694 mutex_lock(&data->update_lock);
695 switch (fn) {
696 case SYS_IN_MIN:
697 data->in_min[ix] = IN_TO_REG(val, ix);
698 dme1737_write(client, DME1737_REG_IN_MIN(ix),
699 data->in_min[ix]);
700 break;
701 case SYS_IN_MAX:
702 data->in_max[ix] = IN_TO_REG(val, ix);
703 dme1737_write(client, DME1737_REG_IN_MAX(ix),
704 data->in_max[ix]);
705 break;
706 default:
707 dev_dbg(dev, "Unknown attr fetch (%d)\n", fn);
708 }
709 mutex_unlock(&data->update_lock);
710
711 return count;
712}
713
714/* ---------------------------------------------------------------------
715 * Temperature sysfs attributes
716 * ix = [0-2]
717 * --------------------------------------------------------------------- */
718
719#define SYS_TEMP_INPUT 0
720#define SYS_TEMP_MIN 1
721#define SYS_TEMP_MAX 2
722#define SYS_TEMP_OFFSET 3
723#define SYS_TEMP_ALARM 4
724#define SYS_TEMP_FAULT 5
725
726static ssize_t show_temp(struct device *dev, struct device_attribute *attr,
727 char *buf)
728{
729 struct dme1737_data *data = dme1737_update_device(dev);
730 struct sensor_device_attribute_2
731 *sensor_attr_2 = to_sensor_dev_attr_2(attr);
732 int ix = sensor_attr_2->index;
733 int fn = sensor_attr_2->nr;
734 int res;
735
736 switch (fn) {
737 case SYS_TEMP_INPUT:
738 res = TEMP_FROM_REG(data->temp[ix], 16);
739 break;
740 case SYS_TEMP_MIN:
741 res = TEMP_FROM_REG(data->temp_min[ix], 8);
742 break;
743 case SYS_TEMP_MAX:
744 res = TEMP_FROM_REG(data->temp_max[ix], 8);
745 break;
746 case SYS_TEMP_OFFSET:
747 res = TEMP_FROM_REG(data->temp_offset[ix], 8);
748 break;
749 case SYS_TEMP_ALARM:
750 res = (data->alarms >> DME1737_BIT_ALARM_TEMP[ix]) & 0x01;
751 break;
752 case SYS_TEMP_FAULT:
753 res = (data->temp[ix] == 0x0800);
754 break;
755 default:
756 res = 0;
757 dev_dbg(dev, "Unknown attr fetch (%d)\n", fn);
758 }
759
760 return sprintf(buf, "%d\n", res);
761}
762
763static ssize_t set_temp(struct device *dev, struct device_attribute *attr,
764 const char *buf, size_t count)
765{
766 struct i2c_client *client = to_i2c_client(dev);
767 struct dme1737_data *data = i2c_get_clientdata(client);
768 struct sensor_device_attribute_2
769 *sensor_attr_2 = to_sensor_dev_attr_2(attr);
770 int ix = sensor_attr_2->index;
771 int fn = sensor_attr_2->nr;
772 long val = simple_strtol(buf, NULL, 10);
773
774 mutex_lock(&data->update_lock);
775 switch (fn) {
776 case SYS_TEMP_MIN:
777 data->temp_min[ix] = TEMP_TO_REG(val);
778 dme1737_write(client, DME1737_REG_TEMP_MIN(ix),
779 data->temp_min[ix]);
780 break;
781 case SYS_TEMP_MAX:
782 data->temp_max[ix] = TEMP_TO_REG(val);
783 dme1737_write(client, DME1737_REG_TEMP_MAX(ix),
784 data->temp_max[ix]);
785 break;
786 case SYS_TEMP_OFFSET:
787 data->temp_offset[ix] = TEMP_TO_REG(val);
788 dme1737_write(client, DME1737_REG_TEMP_OFFSET(ix),
789 data->temp_offset[ix]);
790 break;
791 default:
792 dev_dbg(dev, "Unknown attr fetch (%d)\n", fn);
793 }
794 mutex_unlock(&data->update_lock);
795
796 return count;
797}
798
799/* ---------------------------------------------------------------------
800 * Zone sysfs attributes
801 * ix = [0-2]
802 * --------------------------------------------------------------------- */
803
804#define SYS_ZONE_AUTO_CHANNELS_TEMP 0
805#define SYS_ZONE_AUTO_POINT1_TEMP_HYST 1
806#define SYS_ZONE_AUTO_POINT1_TEMP 2
807#define SYS_ZONE_AUTO_POINT2_TEMP 3
808#define SYS_ZONE_AUTO_POINT3_TEMP 4
809
810static ssize_t show_zone(struct device *dev, struct device_attribute *attr,
811 char *buf)
812{
813 struct dme1737_data *data = dme1737_update_device(dev);
814 struct sensor_device_attribute_2
815 *sensor_attr_2 = to_sensor_dev_attr_2(attr);
816 int ix = sensor_attr_2->index;
817 int fn = sensor_attr_2->nr;
818 int res;
819
820 switch (fn) {
821 case SYS_ZONE_AUTO_CHANNELS_TEMP:
822 /* check config2 for non-standard temp-to-zone mapping */
823 if ((ix == 1) && (data->config2 & 0x02)) {
824 res = 4;
825 } else {
826 res = 1 << ix;
827 }
828 break;
829 case SYS_ZONE_AUTO_POINT1_TEMP_HYST:
830 res = TEMP_FROM_REG(data->zone_low[ix], 8) -
831 TEMP_HYST_FROM_REG(data->zone_hyst[ix == 2], ix);
832 break;
833 case SYS_ZONE_AUTO_POINT1_TEMP:
834 res = TEMP_FROM_REG(data->zone_low[ix], 8);
835 break;
836 case SYS_ZONE_AUTO_POINT2_TEMP:
837 /* pwm_freq holds the temp range bits in the upper nibble */
838 res = TEMP_FROM_REG(data->zone_low[ix], 8) +
839 TEMP_RANGE_FROM_REG(data->pwm_freq[ix]);
840 break;
841 case SYS_ZONE_AUTO_POINT3_TEMP:
842 res = TEMP_FROM_REG(data->zone_abs[ix], 8);
843 break;
844 default:
845 res = 0;
846 dev_dbg(dev, "Unknown attr fetch (%d)\n", fn);
847 }
848
849 return sprintf(buf, "%d\n", res);
850}
851
852static ssize_t set_zone(struct device *dev, struct device_attribute *attr,
853 const char *buf, size_t count)
854{
855 struct i2c_client *client = to_i2c_client(dev);
856 struct dme1737_data *data = i2c_get_clientdata(client);
857 struct sensor_device_attribute_2
858 *sensor_attr_2 = to_sensor_dev_attr_2(attr);
859 int ix = sensor_attr_2->index;
860 int fn = sensor_attr_2->nr;
861 long val = simple_strtol(buf, NULL, 10);
862
863 mutex_lock(&data->update_lock);
864 switch (fn) {
865 case SYS_ZONE_AUTO_POINT1_TEMP_HYST:
866 /* Refresh the cache */
867 data->zone_low[ix] = dme1737_read(client,
868 DME1737_REG_ZONE_LOW(ix));
869 /* Modify the temp hyst value */
870 data->zone_hyst[ix == 2] = TEMP_HYST_TO_REG(
871 TEMP_FROM_REG(data->zone_low[ix], 8) -
872 val, ix, dme1737_read(client,
873 DME1737_REG_ZONE_HYST(ix == 2)));
874 dme1737_write(client, DME1737_REG_ZONE_HYST(ix == 2),
875 data->zone_hyst[ix == 2]);
876 break;
877 case SYS_ZONE_AUTO_POINT1_TEMP:
878 data->zone_low[ix] = TEMP_TO_REG(val);
879 dme1737_write(client, DME1737_REG_ZONE_LOW(ix),
880 data->zone_low[ix]);
881 break;
882 case SYS_ZONE_AUTO_POINT2_TEMP:
883 /* Refresh the cache */
884 data->zone_low[ix] = dme1737_read(client,
885 DME1737_REG_ZONE_LOW(ix));
886 /* Modify the temp range value (which is stored in the upper
887 * nibble of the pwm_freq register) */
888 data->pwm_freq[ix] = TEMP_RANGE_TO_REG(val -
889 TEMP_FROM_REG(data->zone_low[ix], 8),
890 dme1737_read(client,
891 DME1737_REG_PWM_FREQ(ix)));
892 dme1737_write(client, DME1737_REG_PWM_FREQ(ix),
893 data->pwm_freq[ix]);
894 break;
895 case SYS_ZONE_AUTO_POINT3_TEMP:
896 data->zone_abs[ix] = TEMP_TO_REG(val);
897 dme1737_write(client, DME1737_REG_ZONE_ABS(ix),
898 data->zone_abs[ix]);
899 break;
900 default:
901 dev_dbg(dev, "Unknown attr fetch (%d)\n", fn);
902 }
903 mutex_unlock(&data->update_lock);
904
905 return count;
906}
907
908/* ---------------------------------------------------------------------
909 * Fan sysfs attributes
910 * ix = [0-5]
911 * --------------------------------------------------------------------- */
912
913#define SYS_FAN_INPUT 0
914#define SYS_FAN_MIN 1
915#define SYS_FAN_MAX 2
916#define SYS_FAN_ALARM 3
917#define SYS_FAN_TYPE 4
918
919static ssize_t show_fan(struct device *dev, struct device_attribute *attr,
920 char *buf)
921{
922 struct dme1737_data *data = dme1737_update_device(dev);
923 struct sensor_device_attribute_2
924 *sensor_attr_2 = to_sensor_dev_attr_2(attr);
925 int ix = sensor_attr_2->index;
926 int fn = sensor_attr_2->nr;
927 int res;
928
929 switch (fn) {
930 case SYS_FAN_INPUT:
931 res = FAN_FROM_REG(data->fan[ix],
932 ix < 4 ? 0 :
933 FAN_TPC_FROM_REG(data->fan_opt[ix]));
934 break;
935 case SYS_FAN_MIN:
936 res = FAN_FROM_REG(data->fan_min[ix],
937 ix < 4 ? 0 :
938 FAN_TPC_FROM_REG(data->fan_opt[ix]));
939 break;
940 case SYS_FAN_MAX:
941 /* only valid for fan[5-6] */
942 res = FAN_MAX_FROM_REG(data->fan_max[ix - 4]);
943 break;
944 case SYS_FAN_ALARM:
945 res = (data->alarms >> DME1737_BIT_ALARM_FAN[ix]) & 0x01;
946 break;
947 case SYS_FAN_TYPE:
948 /* only valid for fan[1-4] */
949 res = FAN_TYPE_FROM_REG(data->fan_opt[ix]);
950 break;
951 default:
952 res = 0;
953 dev_dbg(dev, "Unknown attr fetch (%d)\n", fn);
954 }
955
956 return sprintf(buf, "%d\n", res);
957}
958
959static ssize_t set_fan(struct device *dev, struct device_attribute *attr,
960 const char *buf, size_t count)
961{
962 struct i2c_client *client = to_i2c_client(dev);
963 struct dme1737_data *data = i2c_get_clientdata(client);
964 struct sensor_device_attribute_2
965 *sensor_attr_2 = to_sensor_dev_attr_2(attr);
966 int ix = sensor_attr_2->index;
967 int fn = sensor_attr_2->nr;
968 long val = simple_strtol(buf, NULL, 10);
969
970 mutex_lock(&data->update_lock);
971 switch (fn) {
972 case SYS_FAN_MIN:
973 if (ix < 4) {
974 data->fan_min[ix] = FAN_TO_REG(val, 0);
975 } else {
976 /* Refresh the cache */
977 data->fan_opt[ix] = dme1737_read(client,
978 DME1737_REG_FAN_OPT(ix));
979 /* Modify the fan min value */
980 data->fan_min[ix] = FAN_TO_REG(val,
981 FAN_TPC_FROM_REG(data->fan_opt[ix]));
982 }
983 dme1737_write(client, DME1737_REG_FAN_MIN(ix),
984 data->fan_min[ix] & 0xff);
985 dme1737_write(client, DME1737_REG_FAN_MIN(ix) + 1,
986 data->fan_min[ix] >> 8);
987 break;
988 case SYS_FAN_MAX:
989 /* Only valid for fan[5-6] */
990 data->fan_max[ix - 4] = FAN_MAX_TO_REG(val);
991 dme1737_write(client, DME1737_REG_FAN_MAX(ix),
992 data->fan_max[ix - 4]);
993 break;
994 case SYS_FAN_TYPE:
995 /* Only valid for fan[1-4] */
996 if (!(val == 1 || val == 2 || val == 4)) {
997 count = -EINVAL;
998 dev_warn(&client->dev, "Fan type value %ld not "
999 "supported. Choose one of 1, 2, or 4.\n",
1000 val);
1001 goto exit;
1002 }
1003 data->fan_opt[ix] = FAN_TYPE_TO_REG(val, dme1737_read(client,
1004 DME1737_REG_FAN_OPT(ix)));
1005 dme1737_write(client, DME1737_REG_FAN_OPT(ix),
1006 data->fan_opt[ix]);
1007 break;
1008 default:
1009 dev_dbg(dev, "Unknown attr fetch (%d)\n", fn);
1010 }
1011exit:
1012 mutex_unlock(&data->update_lock);
1013
1014 return count;
1015}
1016
1017/* ---------------------------------------------------------------------
1018 * PWM sysfs attributes
1019 * ix = [0-4]
1020 * --------------------------------------------------------------------- */
1021
1022#define SYS_PWM 0
1023#define SYS_PWM_FREQ 1
1024#define SYS_PWM_ENABLE 2
1025#define SYS_PWM_RAMP_RATE 3
1026#define SYS_PWM_AUTO_CHANNELS_ZONE 4
1027#define SYS_PWM_AUTO_PWM_MIN 5
1028#define SYS_PWM_AUTO_POINT1_PWM 6
1029#define SYS_PWM_AUTO_POINT2_PWM 7
1030
1031static ssize_t show_pwm(struct device *dev, struct device_attribute *attr,
1032 char *buf)
1033{
1034 struct dme1737_data *data = dme1737_update_device(dev);
1035 struct sensor_device_attribute_2
1036 *sensor_attr_2 = to_sensor_dev_attr_2(attr);
1037 int ix = sensor_attr_2->index;
1038 int fn = sensor_attr_2->nr;
1039 int res;
1040
1041 switch (fn) {
1042 case SYS_PWM:
1043 if (PWM_EN_FROM_REG(data->pwm_config[ix]) == 0) {
1044 res = 255;
1045 } else {
1046 res = data->pwm[ix];
1047 }
1048 break;
1049 case SYS_PWM_FREQ:
1050 res = PWM_FREQ_FROM_REG(data->pwm_freq[ix]);
1051 break;
1052 case SYS_PWM_ENABLE:
1053 if (ix > 3) {
1054 res = 1; /* pwm[5-6] hard-wired to manual mode */
1055 } else {
1056 res = PWM_EN_FROM_REG(data->pwm_config[ix]);
1057 }
1058 break;
1059 case SYS_PWM_RAMP_RATE:
1060 /* Only valid for pwm[1-3] */
1061 res = PWM_RR_FROM_REG(data->pwm_rr[ix > 0], ix);
1062 break;
1063 case SYS_PWM_AUTO_CHANNELS_ZONE:
1064 /* Only valid for pwm[1-3] */
1065 if (PWM_EN_FROM_REG(data->pwm_config[ix]) == 2) {
1066 res = PWM_ACZ_FROM_REG(data->pwm_config[ix]);
1067 } else {
1068 res = data->pwm_acz[ix];
1069 }
1070 break;
1071 case SYS_PWM_AUTO_PWM_MIN:
1072 /* Only valid for pwm[1-3] */
1073 if (PWM_OFF_FROM_REG(data->pwm_rr[0], ix)) {
1074 res = data->pwm_min[ix];
1075 } else {
1076 res = 0;
1077 }
1078 break;
1079 case SYS_PWM_AUTO_POINT1_PWM:
1080 /* Only valid for pwm[1-3] */
1081 res = data->pwm_min[ix];
1082 break;
1083 case SYS_PWM_AUTO_POINT2_PWM:
1084 /* Only valid for pwm[1-3] */
1085 res = 255; /* hard-wired */
1086 break;
1087 default:
1088 res = 0;
1089 dev_dbg(dev, "Unknown attr fetch (%d)\n", fn);
1090 }
1091
1092 return sprintf(buf, "%d\n", res);
1093}
1094
1095static struct attribute *dme1737_attr_pwm[];
1096static void dme1737_chmod_file(struct i2c_client*, struct attribute*, mode_t);
1097
1098static ssize_t set_pwm(struct device *dev, struct device_attribute *attr,
1099 const char *buf, size_t count)
1100{
1101 struct i2c_client *client = to_i2c_client(dev);
1102 struct dme1737_data *data = i2c_get_clientdata(client);
1103 struct sensor_device_attribute_2
1104 *sensor_attr_2 = to_sensor_dev_attr_2(attr);
1105 int ix = sensor_attr_2->index;
1106 int fn = sensor_attr_2->nr;
1107 long val = simple_strtol(buf, NULL, 10);
1108
1109 mutex_lock(&data->update_lock);
1110 switch (fn) {
1111 case SYS_PWM:
1112 data->pwm[ix] = SENSORS_LIMIT(val, 0, 255);
1113 dme1737_write(client, DME1737_REG_PWM(ix), data->pwm[ix]);
1114 break;
1115 case SYS_PWM_FREQ:
1116 data->pwm_freq[ix] = PWM_FREQ_TO_REG(val, dme1737_read(client,
1117 DME1737_REG_PWM_FREQ(ix)));
1118 dme1737_write(client, DME1737_REG_PWM_FREQ(ix),
1119 data->pwm_freq[ix]);
1120 break;
1121 case SYS_PWM_ENABLE:
1122 /* Only valid for pwm[1-3] */
1123 if (val < 0 || val > 2) {
1124 count = -EINVAL;
1125 dev_warn(&client->dev, "PWM enable %ld not "
1126 "supported. Choose one of 0, 1, or 2.\n",
1127 val);
1128 goto exit;
1129 }
1130 /* Refresh the cache */
1131 data->pwm_config[ix] = dme1737_read(client,
1132 DME1737_REG_PWM_CONFIG(ix));
1133 if (val == PWM_EN_FROM_REG(data->pwm_config[ix])) {
1134 /* Bail out if no change */
1135 goto exit;
1136 }
1137 /* Do some housekeeping if we are currently in auto mode */
1138 if (PWM_EN_FROM_REG(data->pwm_config[ix]) == 2) {
1139 /* Save the current zone channel assignment */
1140 data->pwm_acz[ix] = PWM_ACZ_FROM_REG(
1141 data->pwm_config[ix]);
1142 /* Save the current ramp rate state and disable it */
1143 data->pwm_rr[ix > 0] = dme1737_read(client,
1144 DME1737_REG_PWM_RR(ix > 0));
1145 data->pwm_rr_en &= ~(1 << ix);
1146 if (PWM_RR_EN_FROM_REG(data->pwm_rr[ix > 0], ix)) {
1147 data->pwm_rr_en |= (1 << ix);
1148 data->pwm_rr[ix > 0] = PWM_RR_EN_TO_REG(0, ix,
1149 data->pwm_rr[ix > 0]);
1150 dme1737_write(client,
1151 DME1737_REG_PWM_RR(ix > 0),
1152 data->pwm_rr[ix > 0]);
1153 }
1154 }
1155 /* Set the new PWM mode */
1156 switch (val) {
1157 case 0:
1158 /* Change permissions of pwm[ix] to read-only */
1159 dme1737_chmod_file(client, dme1737_attr_pwm[ix],
1160 S_IRUGO);
1161 /* Turn fan fully on */
1162 data->pwm_config[ix] = PWM_EN_TO_REG(0,
1163 data->pwm_config[ix]);
1164 dme1737_write(client, DME1737_REG_PWM_CONFIG(ix),
1165 data->pwm_config[ix]);
1166 break;
1167 case 1:
1168 /* Turn on manual mode */
1169 data->pwm_config[ix] = PWM_EN_TO_REG(1,
1170 data->pwm_config[ix]);
1171 dme1737_write(client, DME1737_REG_PWM_CONFIG(ix),
1172 data->pwm_config[ix]);
1173 /* Change permissions of pwm[ix] to read-writeable */
1174 dme1737_chmod_file(client, dme1737_attr_pwm[ix],
1175 S_IRUGO | S_IWUSR);
1176 break;
1177 case 2:
1178 /* Change permissions of pwm[ix] to read-only */
1179 dme1737_chmod_file(client, dme1737_attr_pwm[ix],
1180 S_IRUGO);
1181 /* Turn on auto mode using the saved zone channel
1182 * assignment */
1183 data->pwm_config[ix] = PWM_ACZ_TO_REG(
1184 data->pwm_acz[ix],
1185 data->pwm_config[ix]);
1186 dme1737_write(client, DME1737_REG_PWM_CONFIG(ix),
1187 data->pwm_config[ix]);
1188 /* Enable PWM ramp rate if previously enabled */
1189 if (data->pwm_rr_en & (1 << ix)) {
1190 data->pwm_rr[ix > 0] = PWM_RR_EN_TO_REG(1, ix,
1191 dme1737_read(client,
1192 DME1737_REG_PWM_RR(ix > 0)));
1193 dme1737_write(client,
1194 DME1737_REG_PWM_RR(ix > 0),
1195 data->pwm_rr[ix > 0]);
1196 }
1197 break;
1198 }
1199 break;
1200 case SYS_PWM_RAMP_RATE:
1201 /* Only valid for pwm[1-3] */
1202 /* Refresh the cache */
1203 data->pwm_config[ix] = dme1737_read(client,
1204 DME1737_REG_PWM_CONFIG(ix));
1205 data->pwm_rr[ix > 0] = dme1737_read(client,
1206 DME1737_REG_PWM_RR(ix > 0));
1207 /* Set the ramp rate value */
1208 if (val > 0) {
1209 data->pwm_rr[ix > 0] = PWM_RR_TO_REG(val, ix,
1210 data->pwm_rr[ix > 0]);
1211 }
1212 /* Enable/disable the feature only if the associated PWM
1213 * output is in automatic mode. */
1214 if (PWM_EN_FROM_REG(data->pwm_config[ix]) == 2) {
1215 data->pwm_rr[ix > 0] = PWM_RR_EN_TO_REG(val > 0, ix,
1216 data->pwm_rr[ix > 0]);
1217 }
1218 dme1737_write(client, DME1737_REG_PWM_RR(ix > 0),
1219 data->pwm_rr[ix > 0]);
1220 break;
1221 case SYS_PWM_AUTO_CHANNELS_ZONE:
1222 /* Only valid for pwm[1-3] */
1223 if (!(val == 1 || val == 2 || val == 4 ||
1224 val == 6 || val == 7)) {
1225 count = -EINVAL;
1226 dev_warn(&client->dev, "PWM auto channels zone %ld "
1227 "not supported. Choose one of 1, 2, 4, 6, "
1228 "or 7.\n", val);
1229 goto exit;
1230 }
1231 /* Refresh the cache */
1232 data->pwm_config[ix] = dme1737_read(client,
1233 DME1737_REG_PWM_CONFIG(ix));
1234 if (PWM_EN_FROM_REG(data->pwm_config[ix]) == 2) {
1235 /* PWM is already in auto mode so update the temp
1236 * channel assignment */
1237 data->pwm_config[ix] = PWM_ACZ_TO_REG(val,
1238 data->pwm_config[ix]);
1239 dme1737_write(client, DME1737_REG_PWM_CONFIG(ix),
1240 data->pwm_config[ix]);
1241 } else {
1242 /* PWM is not in auto mode so we save the temp
1243 * channel assignment for later use */
1244 data->pwm_acz[ix] = val;
1245 }
1246 break;
1247 case SYS_PWM_AUTO_PWM_MIN:
1248 /* Only valid for pwm[1-3] */
1249 /* Refresh the cache */
1250 data->pwm_min[ix] = dme1737_read(client,
1251 DME1737_REG_PWM_MIN(ix));
1252 /* There are only 2 values supported for the auto_pwm_min
1253 * value: 0 or auto_point1_pwm. So if the temperature drops
1254 * below the auto_point1_temp_hyst value, the fan either turns
1255 * off or runs at auto_point1_pwm duty-cycle. */
1256 if (val > ((data->pwm_min[ix] + 1) / 2)) {
1257 data->pwm_rr[0] = PWM_OFF_TO_REG(1, ix,
1258 dme1737_read(client,
1259 DME1737_REG_PWM_RR(0)));
1260
1261 } else {
1262 data->pwm_rr[0] = PWM_OFF_TO_REG(0, ix,
1263 dme1737_read(client,
1264 DME1737_REG_PWM_RR(0)));
1265
1266 }
1267 dme1737_write(client, DME1737_REG_PWM_RR(0),
1268 data->pwm_rr[0]);
1269 break;
1270 case SYS_PWM_AUTO_POINT1_PWM:
1271 /* Only valid for pwm[1-3] */
1272 data->pwm_min[ix] = SENSORS_LIMIT(val, 0, 255);
1273 dme1737_write(client, DME1737_REG_PWM_MIN(ix),
1274 data->pwm_min[ix]);
1275 break;
1276 default:
1277 dev_dbg(dev, "Unknown attr fetch (%d)\n", fn);
1278 }
1279exit:
1280 mutex_unlock(&data->update_lock);
1281
1282 return count;
1283}
1284
1285/* ---------------------------------------------------------------------
1286 * Miscellaneous sysfs attributes
1287 * --------------------------------------------------------------------- */
1288
1289static ssize_t show_vrm(struct device *dev, struct device_attribute *attr,
1290 char *buf)
1291{
1292 struct i2c_client *client = to_i2c_client(dev);
1293 struct dme1737_data *data = i2c_get_clientdata(client);
1294
1295 return sprintf(buf, "%d\n", data->vrm);
1296}
1297
1298static ssize_t set_vrm(struct device *dev, struct device_attribute *attr,
1299 const char *buf, size_t count)
1300{
1301 struct i2c_client *client = to_i2c_client(dev);
1302 struct dme1737_data *data = i2c_get_clientdata(client);
1303 long val = simple_strtol(buf, NULL, 10);
1304
1305 data->vrm = val;
1306 return count;
1307}
1308
1309static ssize_t show_vid(struct device *dev, struct device_attribute *attr,
1310 char *buf)
1311{
1312 struct dme1737_data *data = dme1737_update_device(dev);
1313
1314 return sprintf(buf, "%d\n", vid_from_reg(data->vid, data->vrm));
1315}
1316
1317/* ---------------------------------------------------------------------
1318 * Sysfs device attribute defines and structs
1319 * --------------------------------------------------------------------- */
1320
1321/* Voltages 0-6 */
1322
1323#define SENSOR_DEVICE_ATTR_IN(ix) \
1324static SENSOR_DEVICE_ATTR_2(in##ix##_input, S_IRUGO, \
1325 show_in, NULL, SYS_IN_INPUT, ix); \
1326static SENSOR_DEVICE_ATTR_2(in##ix##_min, S_IRUGO | S_IWUSR, \
1327 show_in, set_in, SYS_IN_MIN, ix); \
1328static SENSOR_DEVICE_ATTR_2(in##ix##_max, S_IRUGO | S_IWUSR, \
1329 show_in, set_in, SYS_IN_MAX, ix); \
1330static SENSOR_DEVICE_ATTR_2(in##ix##_alarm, S_IRUGO, \
1331 show_in, NULL, SYS_IN_ALARM, ix)
1332
1333SENSOR_DEVICE_ATTR_IN(0);
1334SENSOR_DEVICE_ATTR_IN(1);
1335SENSOR_DEVICE_ATTR_IN(2);
1336SENSOR_DEVICE_ATTR_IN(3);
1337SENSOR_DEVICE_ATTR_IN(4);
1338SENSOR_DEVICE_ATTR_IN(5);
1339SENSOR_DEVICE_ATTR_IN(6);
1340
1341/* Temperatures 1-3 */
1342
1343#define SENSOR_DEVICE_ATTR_TEMP(ix) \
1344static SENSOR_DEVICE_ATTR_2(temp##ix##_input, S_IRUGO, \
1345 show_temp, NULL, SYS_TEMP_INPUT, ix-1); \
1346static SENSOR_DEVICE_ATTR_2(temp##ix##_min, S_IRUGO | S_IWUSR, \
1347 show_temp, set_temp, SYS_TEMP_MIN, ix-1); \
1348static SENSOR_DEVICE_ATTR_2(temp##ix##_max, S_IRUGO | S_IWUSR, \
1349 show_temp, set_temp, SYS_TEMP_MAX, ix-1); \
1350static SENSOR_DEVICE_ATTR_2(temp##ix##_offset, S_IRUGO, \
1351 show_temp, set_temp, SYS_TEMP_OFFSET, ix-1); \
1352static SENSOR_DEVICE_ATTR_2(temp##ix##_alarm, S_IRUGO, \
1353 show_temp, NULL, SYS_TEMP_ALARM, ix-1); \
1354static SENSOR_DEVICE_ATTR_2(temp##ix##_fault, S_IRUGO, \
1355 show_temp, NULL, SYS_TEMP_FAULT, ix-1)
1356
1357SENSOR_DEVICE_ATTR_TEMP(1);
1358SENSOR_DEVICE_ATTR_TEMP(2);
1359SENSOR_DEVICE_ATTR_TEMP(3);
1360
1361/* Zones 1-3 */
1362
1363#define SENSOR_DEVICE_ATTR_ZONE(ix) \
1364static SENSOR_DEVICE_ATTR_2(zone##ix##_auto_channels_temp, S_IRUGO, \
1365 show_zone, NULL, SYS_ZONE_AUTO_CHANNELS_TEMP, ix-1); \
1366static SENSOR_DEVICE_ATTR_2(zone##ix##_auto_point1_temp_hyst, S_IRUGO, \
1367 show_zone, set_zone, SYS_ZONE_AUTO_POINT1_TEMP_HYST, ix-1); \
1368static SENSOR_DEVICE_ATTR_2(zone##ix##_auto_point1_temp, S_IRUGO, \
1369 show_zone, set_zone, SYS_ZONE_AUTO_POINT1_TEMP, ix-1); \
1370static SENSOR_DEVICE_ATTR_2(zone##ix##_auto_point2_temp, S_IRUGO, \
1371 show_zone, set_zone, SYS_ZONE_AUTO_POINT2_TEMP, ix-1); \
1372static SENSOR_DEVICE_ATTR_2(zone##ix##_auto_point3_temp, S_IRUGO, \
1373 show_zone, set_zone, SYS_ZONE_AUTO_POINT3_TEMP, ix-1)
1374
1375SENSOR_DEVICE_ATTR_ZONE(1);
1376SENSOR_DEVICE_ATTR_ZONE(2);
1377SENSOR_DEVICE_ATTR_ZONE(3);
1378
1379/* Fans 1-4 */
1380
1381#define SENSOR_DEVICE_ATTR_FAN_1TO4(ix) \
1382static SENSOR_DEVICE_ATTR_2(fan##ix##_input, S_IRUGO, \
1383 show_fan, NULL, SYS_FAN_INPUT, ix-1); \
1384static SENSOR_DEVICE_ATTR_2(fan##ix##_min, S_IRUGO | S_IWUSR, \
1385 show_fan, set_fan, SYS_FAN_MIN, ix-1); \
1386static SENSOR_DEVICE_ATTR_2(fan##ix##_alarm, S_IRUGO, \
1387 show_fan, NULL, SYS_FAN_ALARM, ix-1); \
1388static SENSOR_DEVICE_ATTR_2(fan##ix##_type, S_IRUGO | S_IWUSR, \
1389 show_fan, set_fan, SYS_FAN_TYPE, ix-1)
1390
1391SENSOR_DEVICE_ATTR_FAN_1TO4(1);
1392SENSOR_DEVICE_ATTR_FAN_1TO4(2);
1393SENSOR_DEVICE_ATTR_FAN_1TO4(3);
1394SENSOR_DEVICE_ATTR_FAN_1TO4(4);
1395
1396/* Fans 5-6 */
1397
1398#define SENSOR_DEVICE_ATTR_FAN_5TO6(ix) \
1399static SENSOR_DEVICE_ATTR_2(fan##ix##_input, S_IRUGO, \
1400 show_fan, NULL, SYS_FAN_INPUT, ix-1); \
1401static SENSOR_DEVICE_ATTR_2(fan##ix##_min, S_IRUGO | S_IWUSR, \
1402 show_fan, set_fan, SYS_FAN_MIN, ix-1); \
1403static SENSOR_DEVICE_ATTR_2(fan##ix##_alarm, S_IRUGO, \
1404 show_fan, NULL, SYS_FAN_ALARM, ix-1); \
1405static SENSOR_DEVICE_ATTR_2(fan##ix##_max, S_IRUGO | S_IWUSR, \
1406 show_fan, set_fan, SYS_FAN_MAX, ix-1)
1407
1408SENSOR_DEVICE_ATTR_FAN_5TO6(5);
1409SENSOR_DEVICE_ATTR_FAN_5TO6(6);
1410
1411/* PWMs 1-3 */
1412
1413#define SENSOR_DEVICE_ATTR_PWM_1TO3(ix) \
1414static SENSOR_DEVICE_ATTR_2(pwm##ix, S_IRUGO, \
1415 show_pwm, set_pwm, SYS_PWM, ix-1); \
1416static SENSOR_DEVICE_ATTR_2(pwm##ix##_freq, S_IRUGO, \
1417 show_pwm, set_pwm, SYS_PWM_FREQ, ix-1); \
1418static SENSOR_DEVICE_ATTR_2(pwm##ix##_enable, S_IRUGO, \
1419 show_pwm, set_pwm, SYS_PWM_ENABLE, ix-1); \
1420static SENSOR_DEVICE_ATTR_2(pwm##ix##_ramp_rate, S_IRUGO, \
1421 show_pwm, set_pwm, SYS_PWM_RAMP_RATE, ix-1); \
1422static SENSOR_DEVICE_ATTR_2(pwm##ix##_auto_channels_zone, S_IRUGO, \
1423 show_pwm, set_pwm, SYS_PWM_AUTO_CHANNELS_ZONE, ix-1); \
1424static SENSOR_DEVICE_ATTR_2(pwm##ix##_auto_pwm_min, S_IRUGO, \
1425 show_pwm, set_pwm, SYS_PWM_AUTO_PWM_MIN, ix-1); \
1426static SENSOR_DEVICE_ATTR_2(pwm##ix##_auto_point1_pwm, S_IRUGO, \
1427 show_pwm, set_pwm, SYS_PWM_AUTO_POINT1_PWM, ix-1); \
1428static SENSOR_DEVICE_ATTR_2(pwm##ix##_auto_point2_pwm, S_IRUGO, \
1429 show_pwm, NULL, SYS_PWM_AUTO_POINT2_PWM, ix-1)
1430
1431SENSOR_DEVICE_ATTR_PWM_1TO3(1);
1432SENSOR_DEVICE_ATTR_PWM_1TO3(2);
1433SENSOR_DEVICE_ATTR_PWM_1TO3(3);
1434
1435/* PWMs 5-6 */
1436
1437#define SENSOR_DEVICE_ATTR_PWM_5TO6(ix) \
1438static SENSOR_DEVICE_ATTR_2(pwm##ix, S_IRUGO | S_IWUSR, \
1439 show_pwm, set_pwm, SYS_PWM, ix-1); \
1440static SENSOR_DEVICE_ATTR_2(pwm##ix##_freq, S_IRUGO | S_IWUSR, \
1441 show_pwm, set_pwm, SYS_PWM_FREQ, ix-1); \
1442static SENSOR_DEVICE_ATTR_2(pwm##ix##_enable, S_IRUGO, \
1443 show_pwm, NULL, SYS_PWM_ENABLE, ix-1)
1444
1445SENSOR_DEVICE_ATTR_PWM_5TO6(5);
1446SENSOR_DEVICE_ATTR_PWM_5TO6(6);
1447
1448/* Misc */
1449
1450static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm, set_vrm);
1451static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL);
1452
1453#define SENSOR_DEV_ATTR_IN(ix) \
1454&sensor_dev_attr_in##ix##_input.dev_attr.attr, \
1455&sensor_dev_attr_in##ix##_min.dev_attr.attr, \
1456&sensor_dev_attr_in##ix##_max.dev_attr.attr, \
1457&sensor_dev_attr_in##ix##_alarm.dev_attr.attr
1458
1459/* These attributes are read-writeable only if the chip is *not* locked */
1460#define SENSOR_DEV_ATTR_TEMP_LOCK(ix) \
1461&sensor_dev_attr_temp##ix##_offset.dev_attr.attr
1462
1463#define SENSOR_DEV_ATTR_TEMP(ix) \
1464SENSOR_DEV_ATTR_TEMP_LOCK(ix), \
1465&sensor_dev_attr_temp##ix##_input.dev_attr.attr, \
1466&sensor_dev_attr_temp##ix##_min.dev_attr.attr, \
1467&sensor_dev_attr_temp##ix##_max.dev_attr.attr, \
1468&sensor_dev_attr_temp##ix##_alarm.dev_attr.attr, \
1469&sensor_dev_attr_temp##ix##_fault.dev_attr.attr
1470
1471/* These attributes are read-writeable only if the chip is *not* locked */
1472#define SENSOR_DEV_ATTR_ZONE_LOCK(ix) \
1473&sensor_dev_attr_zone##ix##_auto_point1_temp_hyst.dev_attr.attr, \
1474&sensor_dev_attr_zone##ix##_auto_point1_temp.dev_attr.attr, \
1475&sensor_dev_attr_zone##ix##_auto_point2_temp.dev_attr.attr, \
1476&sensor_dev_attr_zone##ix##_auto_point3_temp.dev_attr.attr
1477
1478#define SENSOR_DEV_ATTR_ZONE(ix) \
1479SENSOR_DEV_ATTR_ZONE_LOCK(ix), \
1480&sensor_dev_attr_zone##ix##_auto_channels_temp.dev_attr.attr
1481
1482#define SENSOR_DEV_ATTR_FAN_1TO4(ix) \
1483&sensor_dev_attr_fan##ix##_input.dev_attr.attr, \
1484&sensor_dev_attr_fan##ix##_min.dev_attr.attr, \
1485&sensor_dev_attr_fan##ix##_alarm.dev_attr.attr, \
1486&sensor_dev_attr_fan##ix##_type.dev_attr.attr
1487
1488#define SENSOR_DEV_ATTR_FAN_5TO6(ix) \
1489&sensor_dev_attr_fan##ix##_input.dev_attr.attr, \
1490&sensor_dev_attr_fan##ix##_min.dev_attr.attr, \
1491&sensor_dev_attr_fan##ix##_alarm.dev_attr.attr, \
1492&sensor_dev_attr_fan##ix##_max.dev_attr.attr
1493
1494/* These attributes are read-writeable only if the chip is *not* locked */
1495#define SENSOR_DEV_ATTR_PWM_1TO3_LOCK(ix) \
1496&sensor_dev_attr_pwm##ix##_freq.dev_attr.attr, \
1497&sensor_dev_attr_pwm##ix##_enable.dev_attr.attr, \
1498&sensor_dev_attr_pwm##ix##_ramp_rate.dev_attr.attr, \
1499&sensor_dev_attr_pwm##ix##_auto_channels_zone.dev_attr.attr, \
1500&sensor_dev_attr_pwm##ix##_auto_pwm_min.dev_attr.attr, \
1501&sensor_dev_attr_pwm##ix##_auto_point1_pwm.dev_attr.attr
1502
1503#define SENSOR_DEV_ATTR_PWM_1TO3(ix) \
1504SENSOR_DEV_ATTR_PWM_1TO3_LOCK(ix), \
1505&sensor_dev_attr_pwm##ix.dev_attr.attr, \
1506&sensor_dev_attr_pwm##ix##_auto_point2_pwm.dev_attr.attr
1507
1508/* These attributes are read-writeable only if the chip is *not* locked */
1509#define SENSOR_DEV_ATTR_PWM_5TO6_LOCK(ix) \
1510&sensor_dev_attr_pwm##ix.dev_attr.attr, \
1511&sensor_dev_attr_pwm##ix##_freq.dev_attr.attr
1512
1513#define SENSOR_DEV_ATTR_PWM_5TO6(ix) \
1514SENSOR_DEV_ATTR_PWM_5TO6_LOCK(ix), \
1515&sensor_dev_attr_pwm##ix##_enable.dev_attr.attr
1516
1517/* This struct holds all the attributes that are always present and need to be
1518 * created unconditionally. The attributes that need modification of their
1519 * permissions are created read-only and write permissions are added or removed
1520 * on the fly when required */
1521static struct attribute *dme1737_attr[] ={
1522 /* Voltages */
1523 SENSOR_DEV_ATTR_IN(0),
1524 SENSOR_DEV_ATTR_IN(1),
1525 SENSOR_DEV_ATTR_IN(2),
1526 SENSOR_DEV_ATTR_IN(3),
1527 SENSOR_DEV_ATTR_IN(4),
1528 SENSOR_DEV_ATTR_IN(5),
1529 SENSOR_DEV_ATTR_IN(6),
1530 /* Temperatures */
1531 SENSOR_DEV_ATTR_TEMP(1),
1532 SENSOR_DEV_ATTR_TEMP(2),
1533 SENSOR_DEV_ATTR_TEMP(3),
1534 /* Zones */
1535 SENSOR_DEV_ATTR_ZONE(1),
1536 SENSOR_DEV_ATTR_ZONE(2),
1537 SENSOR_DEV_ATTR_ZONE(3),
1538 /* Misc */
1539 &dev_attr_vrm.attr,
1540 &dev_attr_cpu0_vid.attr,
1541 NULL
1542};
1543
1544static const struct attribute_group dme1737_group = {
1545 .attrs = dme1737_attr,
1546};
1547
1548/* The following structs hold the PWM attributes, some of which are optional.
1549 * Their creation depends on the chip configuration which is determined during
1550 * module load. */
1551static struct attribute *dme1737_attr_pwm1[] = {
1552 SENSOR_DEV_ATTR_PWM_1TO3(1),
1553 NULL
1554};
1555static struct attribute *dme1737_attr_pwm2[] = {
1556 SENSOR_DEV_ATTR_PWM_1TO3(2),
1557 NULL
1558};
1559static struct attribute *dme1737_attr_pwm3[] = {
1560 SENSOR_DEV_ATTR_PWM_1TO3(3),
1561 NULL
1562};
1563static struct attribute *dme1737_attr_pwm5[] = {
1564 SENSOR_DEV_ATTR_PWM_5TO6(5),
1565 NULL
1566};
1567static struct attribute *dme1737_attr_pwm6[] = {
1568 SENSOR_DEV_ATTR_PWM_5TO6(6),
1569 NULL
1570};
1571
1572static const struct attribute_group dme1737_pwm_group[] = {
1573 { .attrs = dme1737_attr_pwm1 },
1574 { .attrs = dme1737_attr_pwm2 },
1575 { .attrs = dme1737_attr_pwm3 },
1576 { .attrs = NULL },
1577 { .attrs = dme1737_attr_pwm5 },
1578 { .attrs = dme1737_attr_pwm6 },
1579};
1580
1581/* The following structs hold the fan attributes, some of which are optional.
1582 * Their creation depends on the chip configuration which is determined during
1583 * module load. */
1584static struct attribute *dme1737_attr_fan1[] = {
1585 SENSOR_DEV_ATTR_FAN_1TO4(1),
1586 NULL
1587};
1588static struct attribute *dme1737_attr_fan2[] = {
1589 SENSOR_DEV_ATTR_FAN_1TO4(2),
1590 NULL
1591};
1592static struct attribute *dme1737_attr_fan3[] = {
1593 SENSOR_DEV_ATTR_FAN_1TO4(3),
1594 NULL
1595};
1596static struct attribute *dme1737_attr_fan4[] = {
1597 SENSOR_DEV_ATTR_FAN_1TO4(4),
1598 NULL
1599};
1600static struct attribute *dme1737_attr_fan5[] = {
1601 SENSOR_DEV_ATTR_FAN_5TO6(5),
1602 NULL
1603};
1604static struct attribute *dme1737_attr_fan6[] = {
1605 SENSOR_DEV_ATTR_FAN_5TO6(6),
1606 NULL
1607};
1608
1609static const struct attribute_group dme1737_fan_group[] = {
1610 { .attrs = dme1737_attr_fan1 },
1611 { .attrs = dme1737_attr_fan2 },
1612 { .attrs = dme1737_attr_fan3 },
1613 { .attrs = dme1737_attr_fan4 },
1614 { .attrs = dme1737_attr_fan5 },
1615 { .attrs = dme1737_attr_fan6 },
1616};
1617
1618/* The permissions of all of the following attributes are changed to read-
1619 * writeable if the chip is *not* locked. Otherwise they stay read-only. */
1620static struct attribute *dme1737_attr_lock[] = {
1621 /* Temperatures */
1622 SENSOR_DEV_ATTR_TEMP_LOCK(1),
1623 SENSOR_DEV_ATTR_TEMP_LOCK(2),
1624 SENSOR_DEV_ATTR_TEMP_LOCK(3),
1625 /* Zones */
1626 SENSOR_DEV_ATTR_ZONE_LOCK(1),
1627 SENSOR_DEV_ATTR_ZONE_LOCK(2),
1628 SENSOR_DEV_ATTR_ZONE_LOCK(3),
1629 NULL
1630};
1631
1632static const struct attribute_group dme1737_lock_group = {
1633 .attrs = dme1737_attr_lock,
1634};
1635
1636/* The permissions of the following PWM attributes are changed to read-
1637 * writeable if the chip is *not* locked and the respective PWM is available.
1638 * Otherwise they stay read-only. */
1639static struct attribute *dme1737_attr_pwm1_lock[] = {
1640 SENSOR_DEV_ATTR_PWM_1TO3_LOCK(1),
1641 NULL
1642};
1643static struct attribute *dme1737_attr_pwm2_lock[] = {
1644 SENSOR_DEV_ATTR_PWM_1TO3_LOCK(2),
1645 NULL
1646};
1647static struct attribute *dme1737_attr_pwm3_lock[] = {
1648 SENSOR_DEV_ATTR_PWM_1TO3_LOCK(3),
1649 NULL
1650};
1651static struct attribute *dme1737_attr_pwm5_lock[] = {
1652 SENSOR_DEV_ATTR_PWM_5TO6_LOCK(5),
1653 NULL
1654};
1655static struct attribute *dme1737_attr_pwm6_lock[] = {
1656 SENSOR_DEV_ATTR_PWM_5TO6_LOCK(6),
1657 NULL
1658};
1659
1660static const struct attribute_group dme1737_pwm_lock_group[] = {
1661 { .attrs = dme1737_attr_pwm1_lock },
1662 { .attrs = dme1737_attr_pwm2_lock },
1663 { .attrs = dme1737_attr_pwm3_lock },
1664 { .attrs = NULL },
1665 { .attrs = dme1737_attr_pwm5_lock },
1666 { .attrs = dme1737_attr_pwm6_lock },
1667};
1668
1669/* Pwm[1-3] are read-writeable if the associated pwm is in manual mode and the
1670 * chip is not locked. Otherwise they are read-only. */
1671static struct attribute *dme1737_attr_pwm[] = {
1672 &sensor_dev_attr_pwm1.dev_attr.attr,
1673 &sensor_dev_attr_pwm2.dev_attr.attr,
1674 &sensor_dev_attr_pwm3.dev_attr.attr,
1675};
1676
1677/* ---------------------------------------------------------------------
1678 * Super-IO functions
1679 * --------------------------------------------------------------------- */
1680
1681static inline int dme1737_sio_inb(int sio_cip, int reg)
1682{
1683 outb(reg, sio_cip);
1684 return inb(sio_cip + 1);
1685}
1686
1687static inline void dme1737_sio_outb(int sio_cip, int reg, int val)
1688{
1689 outb(reg, sio_cip);
1690 outb(val, sio_cip + 1);
1691}
1692
1693static int dme1737_sio_get_features(int sio_cip, struct i2c_client *client)
1694{
1695 struct dme1737_data *data = i2c_get_clientdata(client);
1696 int err = 0, reg;
1697 u16 addr;
1698
1699 /* Enter configuration mode */
1700 outb(0x55, sio_cip);
1701
1702 /* Check device ID
1703 * The DME1737 can return either 0x78 or 0x77 as its device ID. */
1704 reg = dme1737_sio_inb(sio_cip, 0x20);
1705 if (!(reg == 0x77 || reg == 0x78)) {
1706 err = -ENODEV;
1707 goto exit;
1708 }
1709
1710 /* Select logical device A (runtime registers) */
1711 dme1737_sio_outb(sio_cip, 0x07, 0x0a);
1712
1713 /* Get the base address of the runtime registers */
1714 if (!(addr = (dme1737_sio_inb(sio_cip, 0x60) << 8) |
1715 dme1737_sio_inb(sio_cip, 0x61))) {
1716 err = -ENODEV;
1717 goto exit;
1718 }
1719
1720 /* Read the runtime registers to determine which optional features
1721 * are enabled and available. Bits [3:2] of registers 0x43-0x46 are set
1722 * to '10' if the respective feature is enabled. */
1723 if ((inb(addr + 0x43) & 0x0c) == 0x08) { /* fan6 */
1724 data->has_fan |= (1 << 5);
1725 }
1726 if ((inb(addr + 0x44) & 0x0c) == 0x08) { /* pwm6 */
1727 data->has_pwm |= (1 << 5);
1728 }
1729 if ((inb(addr + 0x45) & 0x0c) == 0x08) { /* fan5 */
1730 data->has_fan |= (1 << 4);
1731 }
1732 if ((inb(addr + 0x46) & 0x0c) == 0x08) { /* pwm5 */
1733 data->has_pwm |= (1 << 4);
1734 }
1735
1736exit:
1737 /* Exit configuration mode */
1738 outb(0xaa, sio_cip);
1739
1740 return err;
1741}
1742
1743/* ---------------------------------------------------------------------
1744 * Device detection, registration and initialization
1745 * --------------------------------------------------------------------- */
1746
1747static struct i2c_driver dme1737_driver;
1748
1749static void dme1737_chmod_file(struct i2c_client *client,
1750 struct attribute *attr, mode_t mode)
1751{
1752 if (sysfs_chmod_file(&client->dev.kobj, attr, mode)) {
1753 dev_warn(&client->dev, "Failed to change permissions of %s.\n",
1754 attr->name);
1755 }
1756}
1757
1758static void dme1737_chmod_group(struct i2c_client *client,
1759 const struct attribute_group *group,
1760 mode_t mode)
1761{
1762 struct attribute **attr;
1763
1764 for (attr = group->attrs; *attr; attr++) {
1765 dme1737_chmod_file(client, *attr, mode);
1766 }
1767}
1768
1769static int dme1737_init_client(struct i2c_client *client)
1770{
1771 struct dme1737_data *data = i2c_get_clientdata(client);
1772 int ix;
1773 u8 reg;
1774
1775 data->config = dme1737_read(client, DME1737_REG_CONFIG);
1776 /* Inform if part is not monitoring/started */
1777 if (!(data->config & 0x01)) {
1778 if (!force_start) {
1779 dev_err(&client->dev, "Device is not monitoring. "
1780 "Use the force_start load parameter to "
1781 "override.\n");
1782 return -EFAULT;
1783 }
1784
1785 /* Force monitoring */
1786 data->config |= 0x01;
1787 dme1737_write(client, DME1737_REG_CONFIG, data->config);
1788 }
1789 /* Inform if part is not ready */
1790 if (!(data->config & 0x04)) {
1791 dev_err(&client->dev, "Device is not ready.\n");
1792 return -EFAULT;
1793 }
1794
1795 data->config2 = dme1737_read(client, DME1737_REG_CONFIG2);
1796 /* Check if optional fan3 input is enabled */
1797 if (data->config2 & 0x04) {
1798 data->has_fan |= (1 << 2);
1799 }
1800
1801 /* Fan4 and pwm3 are only available if the client's I2C address
1802 * is the default 0x2e. Otherwise the I/Os associated with these
1803 * functions are used for addr enable/select. */
1804 if (client->addr == 0x2e) {
1805 data->has_fan |= (1 << 3);
1806 data->has_pwm |= (1 << 2);
1807 }
1808
1809 /* Determine if the optional fan[5-6] and/or pwm[5-6] are enabled.
1810 * For this, we need to query the runtime registers through the
1811 * Super-IO LPC interface. Try both config ports 0x2e and 0x4e. */
1812 if (dme1737_sio_get_features(0x2e, client) &&
1813 dme1737_sio_get_features(0x4e, client)) {
1814 dev_warn(&client->dev, "Failed to query Super-IO for optional "
1815 "features.\n");
1816 }
1817
1818 /* Fan1, fan2, pwm1, and pwm2 are always present */
1819 data->has_fan |= 0x03;
1820 data->has_pwm |= 0x03;
1821
1822 dev_info(&client->dev, "Optional features: pwm3=%s, pwm5=%s, pwm6=%s, "
1823 "fan3=%s, fan4=%s, fan5=%s, fan6=%s.\n",
1824 (data->has_pwm & (1 << 2)) ? "yes" : "no",
1825 (data->has_pwm & (1 << 4)) ? "yes" : "no",
1826 (data->has_pwm & (1 << 5)) ? "yes" : "no",
1827 (data->has_fan & (1 << 2)) ? "yes" : "no",
1828 (data->has_fan & (1 << 3)) ? "yes" : "no",
1829 (data->has_fan & (1 << 4)) ? "yes" : "no",
1830 (data->has_fan & (1 << 5)) ? "yes" : "no");
1831
1832 reg = dme1737_read(client, DME1737_REG_TACH_PWM);
1833 /* Inform if fan-to-pwm mapping differs from the default */
1834 if (reg != 0xa4) {
1835 dev_warn(&client->dev, "Non-standard fan to pwm mapping: "
1836 "fan1->pwm%d, fan2->pwm%d, fan3->pwm%d, "
1837 "fan4->pwm%d. Please report to the driver "
1838 "maintainer.\n",
1839 (reg & 0x03) + 1, ((reg >> 2) & 0x03) + 1,
1840 ((reg >> 4) & 0x03) + 1, ((reg >> 6) & 0x03) + 1);
1841 }
1842
1843 /* Switch pwm[1-3] to manual mode if they are currently disabled and
1844 * set the duty-cycles to 0% (which is identical to the PWMs being
1845 * disabled). */
1846 if (!(data->config & 0x02)) {
1847 for (ix = 0; ix < 3; ix++) {
1848 data->pwm_config[ix] = dme1737_read(client,
1849 DME1737_REG_PWM_CONFIG(ix));
1850 if ((data->has_pwm & (1 << ix)) &&
1851 (PWM_EN_FROM_REG(data->pwm_config[ix]) == -1)) {
1852 dev_info(&client->dev, "Switching pwm%d to "
1853 "manual mode.\n", ix + 1);
1854 data->pwm_config[ix] = PWM_EN_TO_REG(1,
1855 data->pwm_config[ix]);
1856 dme1737_write(client, DME1737_REG_PWM(ix), 0);
1857 dme1737_write(client,
1858 DME1737_REG_PWM_CONFIG(ix),
1859 data->pwm_config[ix]);
1860 }
1861 }
1862 }
1863
1864 /* Initialize the default PWM auto channels zone (acz) assignments */
1865 data->pwm_acz[0] = 1; /* pwm1 -> zone1 */
1866 data->pwm_acz[1] = 2; /* pwm2 -> zone2 */
1867 data->pwm_acz[2] = 4; /* pwm3 -> zone3 */
1868
1869 /* Set VRM */
1870 data->vrm = vid_which_vrm();
1871
1872 return 0;
1873}
1874
1875static int dme1737_detect(struct i2c_adapter *adapter, int address,
1876 int kind)
1877{
1878 u8 company, verstep = 0;
1879 struct i2c_client *client;
1880 struct dme1737_data *data;
1881 int ix, err = 0;
1882 const char *name;
1883
1884 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
1885 goto exit;
1886 }
1887
1888 if (!(data = kzalloc(sizeof(struct dme1737_data), GFP_KERNEL))) {
1889 err = -ENOMEM;
1890 goto exit;
1891 }
1892
1893 client = &data->client;
1894 i2c_set_clientdata(client, data);
1895 client->addr = address;
1896 client->adapter = adapter;
1897 client->driver = &dme1737_driver;
1898
1899 /* A negative kind means that the driver was loaded with no force
1900 * parameter (default), so we must identify the chip. */
1901 if (kind < 0) {
1902 company = dme1737_read(client, DME1737_REG_COMPANY);
1903 verstep = dme1737_read(client, DME1737_REG_VERSTEP);
1904
1905 if (!((company == DME1737_COMPANY_SMSC) &&
1906 ((verstep & DME1737_VERSTEP_MASK) == DME1737_VERSTEP))) {
1907 err = -ENODEV;
1908 goto exit_kfree;
1909 }
1910 }
1911
1912 kind = dme1737;
1913 name = "dme1737";
1914
1915 /* Fill in the remaining client fields and put it into the global
1916 * list */
1917 strlcpy(client->name, name, I2C_NAME_SIZE);
1918 mutex_init(&data->update_lock);
1919
1920 /* Tell the I2C layer a new client has arrived */
1921 if ((err = i2c_attach_client(client))) {
1922 goto exit_kfree;
1923 }
1924
1925 /* Initialize the DME1737 chip */
1926 if ((err = dme1737_init_client(client))) {
1927 goto exit_detach;
1928 }
1929
1930 /* Create standard sysfs attributes */
1931 if ((err = sysfs_create_group(&client->dev.kobj, &dme1737_group))) {
1932 goto exit_detach;
1933 }
1934
1935 /* Create fan sysfs attributes */
1936 for (ix = 0; ix < ARRAY_SIZE(dme1737_fan_group); ix++) {
1937 if (data->has_fan & (1 << ix)) {
1938 if ((err = sysfs_create_group(&client->dev.kobj,
1939 &dme1737_fan_group[ix]))) {
1940 goto exit_remove;
1941 }
1942 }
1943 }
1944
1945 /* Create PWM sysfs attributes */
1946 for (ix = 0; ix < ARRAY_SIZE(dme1737_pwm_group); ix++) {
1947 if (data->has_pwm & (1 << ix)) {
1948 if ((err = sysfs_create_group(&client->dev.kobj,
1949 &dme1737_pwm_group[ix]))) {
1950 goto exit_remove;
1951 }
1952 }
1953 }
1954
1955 /* Inform if the device is locked. Otherwise change the permissions of
1956 * selected attributes from read-only to read-writeable. */
1957 if (data->config & 0x02) {
1958 dev_info(&client->dev, "Device is locked. Some attributes "
1959 "will be read-only.\n");
1960 } else {
1961 /* Change permissions of standard attributes */
1962 dme1737_chmod_group(client, &dme1737_lock_group,
1963 S_IRUGO | S_IWUSR);
1964
1965 /* Change permissions of PWM attributes */
1966 for (ix = 0; ix < ARRAY_SIZE(dme1737_pwm_lock_group); ix++) {
1967 if (data->has_pwm & (1 << ix)) {
1968 dme1737_chmod_group(client,
1969 &dme1737_pwm_lock_group[ix],
1970 S_IRUGO | S_IWUSR);
1971 }
1972 }
1973
1974 /* Change permissions of pwm[1-3] if in manual mode */
1975 for (ix = 0; ix < 3; ix++) {
1976 if ((data->has_pwm & (1 << ix)) &&
1977 (PWM_EN_FROM_REG(data->pwm_config[ix]) == 1)) {
1978 dme1737_chmod_file(client,
1979 dme1737_attr_pwm[ix],
1980 S_IRUGO | S_IWUSR);
1981 }
1982 }
1983 }
1984
1985 /* Register device */
1986 data->class_dev = hwmon_device_register(&client->dev);
1987 if (IS_ERR(data->class_dev)) {
1988 err = PTR_ERR(data->class_dev);
1989 goto exit_remove;
1990 }
1991
1992 dev_info(&adapter->dev, "Found a DME1737 chip at 0x%02x "
1993 "(rev 0x%02x)\n", client->addr, verstep);
1994
1995 return 0;
1996
1997exit_remove:
1998 for (ix = 0; ix < ARRAY_SIZE(dme1737_fan_group); ix++) {
1999 if (data->has_fan & (1 << ix)) {
2000 sysfs_remove_group(&client->dev.kobj,
2001 &dme1737_fan_group[ix]);
2002 }
2003 }
2004 for (ix = 0; ix < ARRAY_SIZE(dme1737_pwm_group); ix++) {
2005 if (data->has_pwm & (1 << ix)) {
2006 sysfs_remove_group(&client->dev.kobj,
2007 &dme1737_pwm_group[ix]);
2008 }
2009 }
2010 sysfs_remove_group(&client->dev.kobj, &dme1737_group);
2011exit_detach:
2012 i2c_detach_client(client);
2013exit_kfree:
2014 kfree(data);
2015exit:
2016 return err;
2017}
2018
2019static int dme1737_attach_adapter(struct i2c_adapter *adapter)
2020{
2021 if (!(adapter->class & I2C_CLASS_HWMON)) {
2022 return 0;
2023 }
2024
2025 return i2c_probe(adapter, &addr_data, dme1737_detect);
2026}
2027
2028static int dme1737_detach_client(struct i2c_client *client)
2029{
2030 struct dme1737_data *data = i2c_get_clientdata(client);
2031 int ix, err;
2032
2033 hwmon_device_unregister(data->class_dev);
2034
2035 for (ix = 0; ix < ARRAY_SIZE(dme1737_fan_group); ix++) {
2036 if (data->has_fan & (1 << ix)) {
2037 sysfs_remove_group(&client->dev.kobj,
2038 &dme1737_fan_group[ix]);
2039 }
2040 }
2041 for (ix = 0; ix < ARRAY_SIZE(dme1737_pwm_group); ix++) {
2042 if (data->has_pwm & (1 << ix)) {
2043 sysfs_remove_group(&client->dev.kobj,
2044 &dme1737_pwm_group[ix]);
2045 }
2046 }
2047 sysfs_remove_group(&client->dev.kobj, &dme1737_group);
2048
2049 if ((err = i2c_detach_client(client))) {
2050 return err;
2051 }
2052
2053 kfree(data);
2054 return 0;
2055}
2056
2057static struct i2c_driver dme1737_driver = {
2058 .driver = {
2059 .name = "dme1737",
2060 },
2061 .attach_adapter = dme1737_attach_adapter,
2062 .detach_client = dme1737_detach_client,
2063};
2064
2065static int __init dme1737_init(void)
2066{
2067 return i2c_add_driver(&dme1737_driver);
2068}
2069
2070static void __exit dme1737_exit(void)
2071{
2072 i2c_del_driver(&dme1737_driver);
2073}
2074
2075MODULE_AUTHOR("Juerg Haefliger <juergh@gmail.com>");
2076MODULE_DESCRIPTION("DME1737 sensors");
2077MODULE_LICENSE("GPL");
2078
2079module_init(dme1737_init);
2080module_exit(dme1737_exit);
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-08 21:31:14 -0500