1 files changed, 15 insertions, 10 deletions

diff --git a/drivers/video/aty/aty128fb.c b/drivers/video/aty/aty128fb.c
index fb2b0f5b23bd..e6e299feb51b 100644
--- a/drivers/video/aty/aty128fb.c
+++ b/drivers/video/aty/aty128fb.c
@@ -2374,6 +2374,8 @@ static void aty128_set_suspend(struct aty128fb_par *par, int suspend)
         /* Set the chip into the appropriate suspend mode (we use D2,
          * D3 would require a complete re-initialisation of the chip,
          * including PCI config registers, clocks, AGP configuration, ...)
+         *
+         * For resume, the core will have already brought us back to D0
          */
         if (suspend) {
                 /* Make sure CRTC2 is reset. Remove that the day we decide to
@@ -2391,17 +2393,9 @@ static void aty128_set_suspend(struct aty128fb_par *par, int suspend)
                 aty_st_le32(BUS_CNTL1, 0x00000010);
                 aty_st_le32(MEM_POWER_MISC, 0x0c830000);
                 mdelay(100);
-                pci_read_config_word(pdev, par->pm_reg+PCI_PM_CTRL, &pwr_command);
+
                 /* Switch PCI power management to D2 */
-                pci_write_config_word(pdev, par->pm_reg+PCI_PM_CTRL,
-                        (pwr_command & ~PCI_PM_CTRL_STATE_MASK) | 2);
-                pci_read_config_word(pdev, par->pm_reg+PCI_PM_CTRL, &pwr_command);
-        } else {
-                /* Switch back PCI power management to D0 */
-                mdelay(100);
-                pci_write_config_word(pdev, par->pm_reg+PCI_PM_CTRL, 0);
-                pci_read_config_word(pdev, par->pm_reg+PCI_PM_CTRL, &pwr_command);
-                mdelay(100);
+                pci_set_power_state(pdev, PCI_D2);
         }
 }
 
@@ -2410,6 +2404,12 @@ static int aty128_pci_suspend(struct pci_dev *pdev, pm_message_t state)
         struct fb_info *info = pci_get_drvdata(pdev);
         struct aty128fb_par *par = info->par;
 
+        /* Because we may change PCI D state ourselves, we need to
+         * first save the config space content so the core can
+         * restore it properly on resume.
+         */
+        pci_save_state(pdev);
+
         /* We don't do anything but D2, for now we return 0, but
          * we may want to change that. How do we know if the BIOS
          * can properly take care of D3 ? Also, with swsusp, we
@@ -2476,6 +2476,11 @@ static int aty128_do_resume(struct pci_dev *pdev)
         if (pdev->dev.power.power_state.event == PM_EVENT_ON)
                 return 0;
 
+        /* PCI state will have been restored by the core, so
+         * we should be in D0 now with our config space fully
+         * restored
+         */
+
         /* Wakeup chip */
         aty128_set_suspend(par, 0);
         par->asleep = 0;