4 files changed, 489 insertions, 0 deletions

diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index c60dacfaadd2..23334c8bc4c7 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -108,6 +108,12 @@ config SPI_S3C24XX_GPIO
 #
 
 
+config SPI_S3C24XX
+        tristate "Samsung S3C24XX series SPI"
+        depends on SPI_MASTER && ARCH_S3C2410 && EXPERIMENTAL
+        help
+          SPI driver for Samsung S3C24XX series ARM SoCs
+
 #
 # There are lots of SPI device types, with sensors and memory
 # being probably the most widely used ones.
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 4dc82c93bfe6..8f4cb67997b3 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_SPI_BUTTERFLY)		+= spi_butterfly.o
 obj-$(CONFIG_SPI_PXA2XX)                += pxa2xx_spi.o
 obj-$(CONFIG_SPI_MPC83xx)               += spi_mpc83xx.o
 obj-$(CONFIG_SPI_S3C24XX_GPIO)          += spi_s3c24xx_gpio.o
+obj-$(CONFIG_SPI_S3C24XX)               += spi_s3c24xx.o
 #       ... add above this line ...
 
 # SPI protocol drivers (device/link on bus)
diff --git a/drivers/spi/spi_s3c24xx.c b/drivers/spi/spi_s3c24xx.c
new file mode 100644
index 000000000000..9de4b5a04d70
--- /dev/null
+++ b/drivers/spi/spi_s3c24xx.c
@@ -0,0 +1,453 @@
+/* linux/drivers/spi/spi_s3c24xx.c
+ *
+ * Copyright (c) 2006 Ben Dooks
+ * Copyright (c) 2006 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+
+//#define DEBUG
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_bitbang.h>
+
+#include <asm/io.h>
+#include <asm/dma.h>
+#include <asm/hardware.h>
+
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-spi.h>
+#include <asm/arch/spi.h>
+
+struct s3c24xx_spi {
+        /* bitbang has to be first */
+        struct spi_bitbang       bitbang;
+        struct completion        done;
+
+        void __iomem            *regs;
+        int                      irq;
+        int                      len;
+        int                      count;
+
+        /* data buffers */
+        const unsigned char     *tx;
+        unsigned char           *rx;
+
+        struct clk              *clk;
+        struct resource         *ioarea;
+        struct spi_master       *master;
+        struct spi_device       *curdev;
+        struct device           *dev;
+        struct s3c2410_spi_info *pdata;
+};
+
+#define SPCON_DEFAULT (S3C2410_SPCON_MSTR | S3C2410_SPCON_SMOD_INT)
+#define SPPIN_DEFAULT (S3C2410_SPPIN_KEEP)
+
+static inline struct s3c24xx_spi *to_hw(struct spi_device *sdev)
+{
+        return spi_master_get_devdata(sdev->master);
+}
+
+static void s3c24xx_spi_chipsel(struct spi_device *spi, int value)
+{
+        struct s3c24xx_spi *hw = to_hw(spi);
+        unsigned int cspol = spi->mode & SPI_CS_HIGH ? 1 : 0;
+        unsigned int spcon;
+
+        switch (value) {
+        case BITBANG_CS_INACTIVE:
+                if (hw->pdata->set_cs)
+                        hw->pdata->set_cs(hw->pdata, value, cspol);
+                else
+                        s3c2410_gpio_setpin(hw->pdata->pin_cs, cspol ^ 1);
+                break;
+
+        case BITBANG_CS_ACTIVE:
+                spcon = readb(hw->regs + S3C2410_SPCON);
+
+                if (spi->mode & SPI_CPHA)
+                        spcon |= S3C2410_SPCON_CPHA_FMTB;
+                else
+                        spcon &= ~S3C2410_SPCON_CPHA_FMTB;
+
+                if (spi->mode & SPI_CPOL)
+                        spcon |= S3C2410_SPCON_CPOL_HIGH;
+                else
+                        spcon &= ~S3C2410_SPCON_CPOL_HIGH;
+
+                spcon |= S3C2410_SPCON_ENSCK;
+
+                /* write new configration */
+
+                writeb(spcon, hw->regs + S3C2410_SPCON);
+
+                if (hw->pdata->set_cs)
+                        hw->pdata->set_cs(hw->pdata, value, cspol);
+                else
+                        s3c2410_gpio_setpin(hw->pdata->pin_cs, cspol);
+
+                break;
+
+        }
+}
+
+static int s3c24xx_spi_setupxfer(struct spi_device *spi,
+                                 struct spi_transfer *t)
+{
+        struct s3c24xx_spi *hw = to_hw(spi);
+        unsigned int bpw;
+        unsigned int hz;
+        unsigned int div;
+
+        bpw = t ? t->bits_per_word : spi->bits_per_word;
+        hz  = t ? t->speed_hz : spi->max_speed_hz;
+
+        if (bpw != 8) {
+                dev_err(&spi->dev, "invalid bits-per-word (%d)\n", bpw);
+                return -EINVAL;
+        }
+
+        div = clk_get_rate(hw->clk) / hz;
+
+        /* is clk = pclk / (2 * (pre+1)), or is it
+         *    clk = (pclk * 2) / ( pre + 1) */
+
+        div = (div / 2) - 1;
+
+        if (div < 0)
+                div = 1;
+
+        if (div > 255)
+                div = 255;
+
+        dev_dbg(&spi->dev, "setting pre-scaler to %d (hz %d)\n", div, hz);
+        writeb(div, hw->regs + S3C2410_SPPRE);
+
+        spin_lock(&hw->bitbang.lock);
+        if (!hw->bitbang.busy) {
+                hw->bitbang.chipselect(spi, BITBANG_CS_INACTIVE);
+                /* need to ndelay for 0.5 clocktick ? */
+        }
+        spin_unlock(&hw->bitbang.lock);
+
+        return 0;
+}
+
+static int s3c24xx_spi_setup(struct spi_device *spi)
+{
+        int ret;
+
+        if (!spi->bits_per_word)
+                spi->bits_per_word = 8;
+
+        if ((spi->mode & SPI_LSB_FIRST) != 0)
+                return -EINVAL;
+
+        ret = s3c24xx_spi_setupxfer(spi, NULL);
+        if (ret < 0) {
+                dev_err(&spi->dev, "setupxfer returned %d\n", ret);
+                return ret;
+        }
+
+        dev_dbg(&spi->dev, "%s: mode %d, %u bpw, %d hz\n",
+                __FUNCTION__, spi->mode, spi->bits_per_word,
+                spi->max_speed_hz);
+
+        return 0;
+}
+
+static inline unsigned int hw_txbyte(struct s3c24xx_spi *hw, int count)
+{
+        return hw->tx ? hw->tx[count] : 0xff;
+}
+
+static int s3c24xx_spi_txrx(struct spi_device *spi, struct spi_transfer *t)
+{
+        struct s3c24xx_spi *hw = to_hw(spi);
+
+        dev_dbg(&spi->dev, "txrx: tx %p, rx %p, len %d\n",
+                t->tx_buf, t->rx_buf, t->len);
+
+        hw->tx = t->tx_buf;
+        hw->rx = t->rx_buf;
+        hw->len = t->len;
+        hw->count = 0;
+
+        /* send the first byte */
+        writeb(hw_txbyte(hw, 0), hw->regs + S3C2410_SPTDAT);
+        wait_for_completion(&hw->done);
+
+        return hw->count;
+}
+
+static irqreturn_t s3c24xx_spi_irq(int irq, void *dev, struct pt_regs *regs)
+{
+        struct s3c24xx_spi *hw = dev;
+        unsigned int spsta = readb(hw->regs + S3C2410_SPSTA);
+        unsigned int count = hw->count;
+
+        if (spsta & S3C2410_SPSTA_DCOL) {
+                dev_dbg(hw->dev, "data-collision\n");
+                complete(&hw->done);
+                goto irq_done;
+        }
+
+        if (!(spsta & S3C2410_SPSTA_READY)) {
+                dev_dbg(hw->dev, "spi not ready for tx?\n");
+                complete(&hw->done);
+                goto irq_done;
+        }
+
+        hw->count++;
+
+        if (hw->rx)
+                hw->rx[count] = readb(hw->regs + S3C2410_SPRDAT);
+
+        count++;
+
+        if (count < hw->len)
+                writeb(hw_txbyte(hw, count), hw->regs + S3C2410_SPTDAT);
+        else
+                complete(&hw->done);
+
+ irq_done:
+        return IRQ_HANDLED;
+}
+
+static int s3c24xx_spi_probe(struct platform_device *pdev)
+{
+        struct s3c24xx_spi *hw;
+        struct spi_master *master;
+        struct spi_board_info *bi;
+        struct resource *res;
+        int err = 0;
+        int i;
+
+        master = spi_alloc_master(&pdev->dev, sizeof(struct s3c24xx_spi));
+        if (master == NULL) {
+                dev_err(&pdev->dev, "No memory for spi_master\n");
+                err = -ENOMEM;
+                goto err_nomem;
+        }
+
+        hw = spi_master_get_devdata(master);
+        memset(hw, 0, sizeof(struct s3c24xx_spi));
+
+        hw->master = spi_master_get(master);
+        hw->pdata = pdev->dev.platform_data;
+        hw->dev = &pdev->dev;
+
+        if (hw->pdata == NULL) {
+                dev_err(&pdev->dev, "No platform data supplied\n");
+                err = -ENOENT;
+                goto err_no_pdata;
+        }
+
+        platform_set_drvdata(pdev, hw);
+        init_completion(&hw->done);
+
+        /* setup the state for the bitbang driver */
+
+        hw->bitbang.master         = hw->master;
+        hw->bitbang.setup_transfer = s3c24xx_spi_setupxfer;
+        hw->bitbang.chipselect     = s3c24xx_spi_chipsel;
+        hw->bitbang.txrx_bufs      = s3c24xx_spi_txrx;
+        hw->bitbang.master->setup  = s3c24xx_spi_setup;
+
+        dev_dbg(hw->dev, "bitbang at %p\n", &hw->bitbang);
+
+        /* find and map our resources */
+
+        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+        if (res == NULL) {
+                dev_err(&pdev->dev, "Cannot get IORESOURCE_MEM\n");
+                err = -ENOENT;
+                goto err_no_iores;
+        }
+
+        hw->ioarea = request_mem_region(res->start, (res->end - res->start)+1,
+                                        pdev->name);
+
+        if (hw->ioarea == NULL) {
+                dev_err(&pdev->dev, "Cannot reserve region\n");
+                err = -ENXIO;
+                goto err_no_iores;
+        }
+
+        hw->regs = ioremap(res->start, (res->end - res->start)+1);
+        if (hw->regs == NULL) {
+                dev_err(&pdev->dev, "Cannot map IO\n");
+                err = -ENXIO;
+                goto err_no_iomap;
+        }
+
+        hw->irq = platform_get_irq(pdev, 0);
+        if (hw->irq < 0) {
+                dev_err(&pdev->dev, "No IRQ specified\n");
+                err = -ENOENT;
+                goto err_no_irq;
+        }
+
+        err = request_irq(hw->irq, s3c24xx_spi_irq, 0, pdev->name, hw);
+        if (err) {
+                dev_err(&pdev->dev, "Cannot claim IRQ\n");
+                goto err_no_irq;
+        }
+
+        hw->clk = clk_get(&pdev->dev, "spi");
+        if (IS_ERR(hw->clk)) {
+                dev_err(&pdev->dev, "No clock for device\n");
+                err = PTR_ERR(hw->clk);
+                goto err_no_clk;
+        }
+
+        /* for the moment, permanently enable the clock */
+
+        clk_enable(hw->clk);
+
+        /* program defaults into the registers */
+
+        writeb(0xff, hw->regs + S3C2410_SPPRE);
+        writeb(SPPIN_DEFAULT, hw->regs + S3C2410_SPPIN);
+        writeb(SPCON_DEFAULT, hw->regs + S3C2410_SPCON);
+
+        /* setup any gpio we can */
+
+        if (!hw->pdata->set_cs) {
+                s3c2410_gpio_setpin(hw->pdata->pin_cs, 1);
+                s3c2410_gpio_cfgpin(hw->pdata->pin_cs, S3C2410_GPIO_OUTPUT);
+        }
+
+        /* register our spi controller */
+
+        err = spi_bitbang_start(&hw->bitbang);
+        if (err) {
+                dev_err(&pdev->dev, "Failed to register SPI master\n");
+                goto err_register;
+        }
+
+        dev_dbg(hw->dev, "shutdown=%d\n", hw->bitbang.shutdown);
+
+        /* register all the devices associated */
+
+        bi = &hw->pdata->board_info[0];
+        for (i = 0; i < hw->pdata->board_size; i++, bi++) {
+                dev_info(hw->dev, "registering %s\n", bi->modalias);
+
+                bi->controller_data = hw;
+                spi_new_device(master, bi);
+        }
+
+        return 0;
+
+ err_register:
+        clk_disable(hw->clk);
+        clk_put(hw->clk);
+
+ err_no_clk:
+        free_irq(hw->irq, hw);
+
+ err_no_irq:
+        iounmap(hw->regs);
+
+ err_no_iomap:
+        release_resource(hw->ioarea);
+        kfree(hw->ioarea);
+
+ err_no_iores:
+ err_no_pdata:
+        spi_master_put(hw->master);;
+
+ err_nomem:
+        return err;
+}
+
+static int s3c24xx_spi_remove(struct platform_device *dev)
+{
+        struct s3c24xx_spi *hw = platform_get_drvdata(dev);
+
+        platform_set_drvdata(dev, NULL);
+
+        spi_unregister_master(hw->master);
+
+        clk_disable(hw->clk);
+        clk_put(hw->clk);
+
+        free_irq(hw->irq, hw);
+        iounmap(hw->regs);
+
+        release_resource(hw->ioarea);
+        kfree(hw->ioarea);
+
+        spi_master_put(hw->master);
+        return 0;
+}
+
+
+#ifdef CONFIG_PM
+
+static int s3c24xx_spi_suspend(struct platform_device *pdev, pm_message_t msg)
+{
+        struct s3c24xx_spi *hw = platform_get_drvdata(dev);
+
+        clk_disable(hw->clk);
+        return 0;
+}
+
+static int s3c24xx_spi_resume(struct platform_device *pdev)
+{
+        struct s3c24xx_spi *hw = platform_get_drvdata(dev);
+
+        clk_enable(hw->clk);
+        return 0;
+}
+
+#else
+#define s3c24xx_spi_suspend NULL
+#define s3c24xx_spi_resume  NULL
+#endif
+
+static struct platform_driver s3c24xx_spidrv = {
+        .probe          = s3c24xx_spi_probe,
+        .remove         = s3c24xx_spi_remove,
+        .suspend        = s3c24xx_spi_suspend,
+        .resume         = s3c24xx_spi_resume,
+        .driver         = {
+                .name   = "s3c2410-spi",
+                .owner  = THIS_MODULE,
+        },
+};
+
+static int __init s3c24xx_spi_init(void)
+{
+        return platform_driver_register(&s3c24xx_spidrv);
+}
+
+static void __exit s3c24xx_spi_exit(void)
+{
+        platform_driver_unregister(&s3c24xx_spidrv);
+}
+
+module_init(s3c24xx_spi_init);
+module_exit(s3c24xx_spi_exit);
+
+MODULE_DESCRIPTION("S3C24XX SPI Driver");
+MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
+MODULE_LICENSE("GPL");
diff --git a/include/asm-arm/arch-s3c2410/spi.h b/include/asm-arm/arch-s3c2410/spi.h
new file mode 100644
index 000000000000..4029a1a1ab40
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/spi.h
@@ -0,0 +1,29 @@
+/* linux/include/asm-arm/arch-s3c2410/spi.h
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - SPI Controller platform_device info
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_SPI_H
+#define __ASM_ARCH_SPI_H __FILE__
+
+struct s3c2410_spi_info;
+struct spi_board_info;
+
+struct s3c2410_spi_info {
+        unsigned long            pin_cs;        /* simple gpio cs */
+
+        unsigned long            board_size;
+        struct spi_board_info   *board_info;
+
+        void (*set_cs)(struct s3c2410_spi_info *spi, int cs, int pol);
+};
+
+
+#endif /* __ASM_ARCH_SPI_H */