488 files changed, 14556 insertions, 6055 deletions

diff --git a/Documentation/DocBook/kgdb.tmpl b/Documentation/DocBook/kgdb.tmpl
index 97618bed4d65..028a8444d95e 100644
--- a/Documentation/DocBook/kgdb.tmpl
+++ b/Documentation/DocBook/kgdb.tmpl
@@ -72,7 +72,7 @@
     kgdb is a source level debugger for linux kernel. It is used along
     with gdb to debug a linux kernel.  The expectation is that gdb can
     be used to "break in" to the kernel to inspect memory, variables
-    and look through a cal stack information similar to what an
+    and look through call stack information similar to what an
     application developer would use gdb for.  It is possible to place
     breakpoints in kernel code and perform some limited execution
     stepping.
@@ -93,8 +93,10 @@
   <chapter id="CompilingAKernel">
     <title>Compiling a kernel</title>
     <para>
-    To enable <symbol>CONFIG_KGDB</symbol>, look under the "Kernel debugging"
-    and then select "KGDB: kernel debugging with remote gdb".
+    To enable <symbol>CONFIG_KGDB</symbol> you should first turn on
+    "Prompt for development and/or incomplete code/drivers"
+    (CONFIG_EXPERIMENTAL) in  "General setup", then under the
+    "Kernel debugging" select "KGDB: kernel debugging with remote gdb".
     </para>
     <para>
     Next you should choose one of more I/O drivers to interconnect debugging
diff --git a/Documentation/hwmon/w83l785ts b/Documentation/hwmon/w83l785ts
index 1841cedc25b2..bd1fa9d4468d 100644
--- a/Documentation/hwmon/w83l785ts
+++ b/Documentation/hwmon/w83l785ts
@@ -33,7 +33,8 @@ Known Issues
 ------------
 
 On some systems (Asus), the BIOS is known to interfere with the driver
-and cause read errors. The driver will retry a given number of times
+and cause read errors. Or maybe the W83L785TS-S chip is simply unreliable,
+we don't really know. The driver will retry a given number of times
 (5 by default) and then give up, returning the old value (or 0 if
 there is no old value). It seems to work well enough so that you should
 not notice anything. Thanks to James Bolt for helping test this feature.
diff --git a/Documentation/kbuild/kconfig-language.txt b/Documentation/kbuild/kconfig-language.txt
index 00b950d1c193..c412c245848f 100644
--- a/Documentation/kbuild/kconfig-language.txt
+++ b/Documentation/kbuild/kconfig-language.txt
@@ -377,27 +377,3 @@ config FOO
 
 limits FOO to module (=m) or disabled (=n).
 
-
-Build limited by a third config symbol which may be =y or =m
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-A common idiom that we see (and sometimes have problems with) is this:
-
-When option C in B (module or subsystem) uses interfaces from A (module
-or subsystem), and both A and B are tristate (could be =y or =m if they
-were independent of each other, but they aren't), then we need to limit
-C such that it cannot be built statically if A is built as a loadable
-module.  (C already depends on B, so there is no dependency issue to
-take care of here.)
-
-If A is linked statically into the kernel image, C can be built
-statically or as loadable module(s).  However, if A is built as loadable
-module(s), then C must be restricted to loadable module(s) also.  This
-can be expressed in kconfig language as:
-
-config C
-        depends on A = y || A = B
-
-or for real examples, use this command in a kernel tree:
-
-$ find . -name Kconfig\* | xargs grep -ns "depends on.*=.*||.*=" | grep -v orig
-
diff --git a/Documentation/kdump/kdump.txt b/Documentation/kdump/kdump.txt
index d0ac72cc19ff..b8e52c0355d3 100644
--- a/Documentation/kdump/kdump.txt
+++ b/Documentation/kdump/kdump.txt
@@ -245,6 +245,8 @@ The syntax is:
     crashkernel=<range1>:<size1>[,<range2>:<size2>,...][@offset]
     range=start-[end]
 
+    'start' is inclusive and 'end' is exclusive.
+
 For example:
 
     crashkernel=512M-2G:64M,2G-:128M
@@ -253,10 +255,11 @@ This would mean:
 
     1) if the RAM is smaller than 512M, then don't reserve anything
        (this is the "rescue" case)
-    2) if the RAM size is between 512M and 2G, then reserve 64M
+    2) if the RAM size is between 512M and 2G (exclusive), then reserve 64M
     3) if the RAM size is larger than 2G, then reserve 128M
 
 
+
 Boot into System Kernel
 =======================
 
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index a3c35446e755..cdd5b934f43e 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1094,9 +1094,6 @@ and is between 256 and 4096 characters. It is defined in the file
         mac5380=        [HW,SCSI] Format:
                         <can_queue>,<cmd_per_lun>,<sg_tablesize>,<hostid>,<use_tags>
 
-        mac53c9x=       [HW,SCSI] Format:
-                        <num_esps>,<disconnect>,<nosync>,<can_queue>,<cmd_per_lun>,<sg_tablesize>,<hostid>,<use_tags>
-
         machvec=        [IA64] Force the use of a particular machine-vector
                         (machvec) in a generic kernel.
                         Example: machvec=hpzx1_swiotlb
@@ -1525,6 +1522,8 @@ and is between 256 and 4096 characters. It is defined in the file
                                 This is normally done in pci_enable_device(),
                                 so this option is a temporary workaround
                                 for broken drivers that don't call it.
+                skip_isa_align  [X86] do not align io start addr, so can
+                                handle more pci cards
                 firmware        [ARM] Do not re-enumerate the bus but instead
                                 just use the configuration from the
                                 bootloader. This is currently used on
diff --git a/Documentation/lguest/lguest.c b/Documentation/lguest/lguest.c
index 4c1fc65a8b3d..3be8ab2a886a 100644
--- a/Documentation/lguest/lguest.c
+++ b/Documentation/lguest/lguest.c
@@ -131,6 +131,9 @@ struct device
         /* Any queues attached to this device */
         struct virtqueue *vq;
 
+        /* Handle status being finalized (ie. feature bits stable). */
+        void (*ready)(struct device *me);
+
         /* Device-specific data. */
         void *priv;
 };
@@ -925,24 +928,40 @@ static void enable_fd(int fd, struct virtqueue *vq)
         write(waker_fd, &vq->dev->fd, sizeof(vq->dev->fd));
 }
 
-/* When the Guest asks us to reset a device, it's is fairly easy. */
-static void reset_device(struct device *dev)
+/* When the Guest tells us they updated the status field, we handle it. */
+static void update_device_status(struct device *dev)
 {
         struct virtqueue *vq;
 
-        verbose("Resetting device %s\n", dev->name);
-        /* Clear the status. */
-        dev->desc->status = 0;
+        /* This is a reset. */
+        if (dev->desc->status == 0) {
+                verbose("Resetting device %s\n", dev->name);
 
-        /* Clear any features they've acked. */
-        memset(get_feature_bits(dev) + dev->desc->feature_len, 0,
-               dev->desc->feature_len);
+                /* Clear any features they've acked. */
+                memset(get_feature_bits(dev) + dev->desc->feature_len, 0,
+                       dev->desc->feature_len);
 
-        /* Zero out the virtqueues. */
-        for (vq = dev->vq; vq; vq = vq->next) {
-                memset(vq->vring.desc, 0,
-                       vring_size(vq->config.num, getpagesize()));
-                vq->last_avail_idx = 0;
+                /* Zero out the virtqueues. */
+                for (vq = dev->vq; vq; vq = vq->next) {
+                        memset(vq->vring.desc, 0,
+                               vring_size(vq->config.num, getpagesize()));
+                        vq->last_avail_idx = 0;
+                }
+        } else if (dev->desc->status & VIRTIO_CONFIG_S_FAILED) {
+                warnx("Device %s configuration FAILED", dev->name);
+        } else if (dev->desc->status & VIRTIO_CONFIG_S_DRIVER_OK) {
+                unsigned int i;
+
+                verbose("Device %s OK: offered", dev->name);
+                for (i = 0; i < dev->desc->feature_len; i++)
+                        verbose(" %08x", get_feature_bits(dev)[i]);
+                verbose(", accepted");
+                for (i = 0; i < dev->desc->feature_len; i++)
+                        verbose(" %08x", get_feature_bits(dev)
+                                [dev->desc->feature_len+i]);
+
+                if (dev->ready)
+                        dev->ready(dev);
         }
 }
 
@@ -954,9 +973,9 @@ static void handle_output(int fd, unsigned long addr)
 
         /* Check each device and virtqueue. */
         for (i = devices.dev; i; i = i->next) {
-                /* Notifications to device descriptors reset the device. */
+                /* Notifications to device descriptors update device status. */
                 if (from_guest_phys(addr) == i->desc) {
-                        reset_device(i);
+                        update_device_status(i);
                         return;
                 }
 
@@ -1170,6 +1189,7 @@ static struct device *new_device(const char *name, u16 type, int fd,
         dev->handle_input = handle_input;
         dev->name = name;
         dev->vq = NULL;
+        dev->ready = NULL;
 
         /* Append to device list.  Prepending to a single-linked list is
          * easier, but the user expects the devices to be arranged on the bus
@@ -1398,7 +1418,7 @@ static bool service_io(struct device *dev)
         struct vblk_info *vblk = dev->priv;
         unsigned int head, out_num, in_num, wlen;
         int ret;
-        struct virtio_blk_inhdr *in;
+        u8 *in;
         struct virtio_blk_outhdr *out;
         struct iovec iov[dev->vq->vring.num];
         off64_t off;
@@ -1416,7 +1436,7 @@ static bool service_io(struct device *dev)
                      head, out_num, in_num);
 
         out = convert(&iov[0], struct virtio_blk_outhdr);
-        in = convert(&iov[out_num+in_num-1], struct virtio_blk_inhdr);
+        in = convert(&iov[out_num+in_num-1], u8);
         off = out->sector * 512;
 
         /* The block device implements "barriers", where the Guest indicates
@@ -1430,7 +1450,7 @@ static bool service_io(struct device *dev)
          * It'd be nice if we supported eject, for example, but we don't. */
         if (out->type & VIRTIO_BLK_T_SCSI_CMD) {
                 fprintf(stderr, "Scsi commands unsupported\n");
-                in->status = VIRTIO_BLK_S_UNSUPP;
+                *in = VIRTIO_BLK_S_UNSUPP;
                 wlen = sizeof(*in);
         } else if (out->type & VIRTIO_BLK_T_OUT) {
                 /* Write */
@@ -1453,7 +1473,7 @@ static bool service_io(struct device *dev)
                         errx(1, "Write past end %llu+%u", off, ret);
                 }
                 wlen = sizeof(*in);
-                in->status = (ret >= 0 ? VIRTIO_BLK_S_OK : VIRTIO_BLK_S_IOERR);
+                *in = (ret >= 0 ? VIRTIO_BLK_S_OK : VIRTIO_BLK_S_IOERR);
         } else {
                 /* Read */
 
@@ -1466,10 +1486,10 @@ static bool service_io(struct device *dev)
                 verbose("READ from sector %llu: %i\n", out->sector, ret);
                 if (ret >= 0) {
                         wlen = sizeof(*in) + ret;
-                        in->status = VIRTIO_BLK_S_OK;
+                        *in = VIRTIO_BLK_S_OK;
                 } else {
                         wlen = sizeof(*in);
-                        in->status = VIRTIO_BLK_S_IOERR;
+                        *in = VIRTIO_BLK_S_IOERR;
                 }
         }
 
diff --git a/Documentation/powerpc/mpc52xx-device-tree-bindings.txt b/Documentation/powerpc/mpc52xx-device-tree-bindings.txt
index cda7a7dffa6d..6f12f1c79c0c 100644
--- a/Documentation/powerpc/mpc52xx-device-tree-bindings.txt
+++ b/Documentation/powerpc/mpc52xx-device-tree-bindings.txt
@@ -237,6 +237,17 @@ Each GPIO controller node should have the empty property gpio-controller and
 according to the bit numbers in the GPIO control registers. The second cell
 is for flags which is currently unsused.
 
+8) FEC nodes
+The FEC node can specify one of the following properties to configure
+the MII link:
+"fsl,7-wire-mode" - An empty property that specifies the link uses 7-wire
+                    mode instead of MII
+"current-speed"   - Specifies that the MII should be configured for a fixed
+                    speed.  This property should contain two cells.  The
+                    first cell specifies the speed in Mbps and the second
+                    should be '0' for half duplex and '1' for full duplex
+"phy-handle"      - Contains a phandle to an Ethernet PHY.
+
 IV - Extra Notes
 ================
 
diff --git a/Documentation/scheduler/sched-design.txt b/Documentation/scheduler/sched-design.txt
deleted file mode 100644
index 1605bf0cba8b..000000000000
--- a/Documentation/scheduler/sched-design.txt
+++ /dev/null
@@ -1,165 +0,0 @@
-                   Goals, Design and Implementation of the
-                      new ultra-scalable O(1) scheduler
-
-
-  This is an edited version of an email Ingo Molnar sent to
-  lkml on 4 Jan 2002.  It describes the goals, design, and
-  implementation of Ingo's new ultra-scalable O(1) scheduler.
-  Last Updated: 18 April 2002.
-
-
-Goal
-====
-
-The main goal of the new scheduler is to keep all the good things we know
-and love about the current Linux scheduler:
-
- - good interactive performance even during high load: if the user
-   types or clicks then the system must react instantly and must execute
-   the user tasks smoothly, even during considerable background load.
-
- - good scheduling/wakeup performance with 1-2 runnable processes.
-
- - fairness: no process should stay without any timeslice for any
-   unreasonable amount of time. No process should get an unjustly high
-   amount of CPU time.
-
- - priorities: less important tasks can be started with lower priority,
-   more important tasks with higher priority.
-
- - SMP efficiency: no CPU should stay idle if there is work to do.
-
- - SMP affinity: processes which run on one CPU should stay affine to
-   that CPU. Processes should not bounce between CPUs too frequently.
-
- - plus additional scheduler features: RT scheduling, CPU binding.
-
-and the goal is also to add a few new things:
-
- - fully O(1) scheduling. Are you tired of the recalculation loop
-   blowing the L1 cache away every now and then? Do you think the goodness
-   loop is taking a bit too long to finish if there are lots of runnable
-   processes? This new scheduler takes no prisoners: wakeup(), schedule(),
-   the timer interrupt are all O(1) algorithms. There is no recalculation
-   loop. There is no goodness loop either.
-
- - 'perfect' SMP scalability. With the new scheduler there is no 'big'
-   runqueue_lock anymore - it's all per-CPU runqueues and locks - two
-   tasks on two separate CPUs can wake up, schedule and context-switch
-   completely in parallel, without any interlocking. All
-   scheduling-relevant data is structured for maximum scalability.
-
- - better SMP affinity. The old scheduler has a particular weakness that
-   causes the random bouncing of tasks between CPUs if/when higher
-   priority/interactive tasks, this was observed and reported by many
-   people. The reason is that the timeslice recalculation loop first needs
-   every currently running task to consume its timeslice. But when this
-   happens on eg. an 8-way system, then this property starves an
-   increasing number of CPUs from executing any process. Once the last
-   task that has a timeslice left has finished using up that timeslice,
-   the recalculation loop is triggered and other CPUs can start executing
-   tasks again - after having idled around for a number of timer ticks.
-   The more CPUs, the worse this effect.
-
-   Furthermore, this same effect causes the bouncing effect as well:
-   whenever there is such a 'timeslice squeeze' of the global runqueue,
-   idle processors start executing tasks which are not affine to that CPU.
-   (because the affine tasks have finished off their timeslices already.)
-
-   The new scheduler solves this problem by distributing timeslices on a
-   per-CPU basis, without having any global synchronization or
-   recalculation.
-
- - batch scheduling. A significant proportion of computing-intensive tasks
-   benefit from batch-scheduling, where timeslices are long and processes
-   are roundrobin scheduled. The new scheduler does such batch-scheduling
-   of the lowest priority tasks - so nice +19 jobs will get
-   'batch-scheduled' automatically. With this scheduler, nice +19 jobs are
-   in essence SCHED_IDLE, from an interactiveness point of view.
-
- - handle extreme loads more smoothly, without breakdown and scheduling
-   storms.
-
- - O(1) RT scheduling. For those RT folks who are paranoid about the
-   O(nr_running) property of the goodness loop and the recalculation loop.
-
- - run fork()ed children before the parent. Andrea has pointed out the
-   advantages of this a few months ago, but patches for this feature
-   do not work with the old scheduler as well as they should,
-   because idle processes often steal the new child before the fork()ing
-   CPU gets to execute it.
-
-
-Design
-======
-
-The core of the new scheduler contains the following mechanisms:
-
- - *two* priority-ordered 'priority arrays' per CPU. There is an 'active'
-   array and an 'expired' array. The active array contains all tasks that
-   are affine to this CPU and have timeslices left. The expired array
-   contains all tasks which have used up their timeslices - but this array
-   is kept sorted as well. The active and expired array is not accessed
-   directly, it's accessed through two pointers in the per-CPU runqueue
-   structure. If all active tasks are used up then we 'switch' the two
-   pointers and from now on the ready-to-go (former-) expired array is the
-   active array - and the empty active array serves as the new collector
-   for expired tasks.
-
- - there is a 64-bit bitmap cache for array indices. Finding the highest
-   priority task is thus a matter of two x86 BSFL bit-search instructions.
-
-the split-array solution enables us to have an arbitrary number of active
-and expired tasks, and the recalculation of timeslices can be done
-immediately when the timeslice expires. Because the arrays are always
-access through the pointers in the runqueue, switching the two arrays can
-be done very quickly.
-
-this is a hybride priority-list approach coupled with roundrobin
-scheduling and the array-switch method of distributing timeslices.
-
- - there is a per-task 'load estimator'.
-
-one of the toughest things to get right is good interactive feel during
-heavy system load. While playing with various scheduler variants i found
-that the best interactive feel is achieved not by 'boosting' interactive
-tasks, but by 'punishing' tasks that want to use more CPU time than there
-is available. This method is also much easier to do in an O(1) fashion.
-
-to establish the actual 'load' the task contributes to the system, a
-complex-looking but pretty accurate method is used: there is a 4-entry
-'history' ringbuffer of the task's activities during the last 4 seconds.
-This ringbuffer is operated without much overhead. The entries tell the
-scheduler a pretty accurate load-history of the task: has it used up more
-CPU time or less during the past N seconds. [the size '4' and the interval
-of 4x 1 seconds was found by lots of experimentation - this part is
-flexible and can be changed in both directions.]
-
-the penalty a task gets for generating more load than the CPU can handle
-is a priority decrease - there is a maximum amount to this penalty
-relative to their static priority, so even fully CPU-bound tasks will
-observe each other's priorities, and will share the CPU accordingly.
-
-the SMP load-balancer can be extended/switched with additional parallel
-computing and cache hierarchy concepts: NUMA scheduling, multi-core CPUs
-can be supported easily by changing the load-balancer. Right now it's
-tuned for my SMP systems.
-
-i skipped the prev->mm == next->mm advantage - no workload i know of shows
-any sensitivity to this. It can be added back by sacrificing O(1)
-schedule() [the current and one-lower priority list can be searched for a
-that->mm == current->mm condition], but costs a fair number of cycles
-during a number of important workloads, so i wanted to avoid this as much
-as possible.
-
-- the SMP idle-task startup code was still racy and the new scheduler
-triggered this. So i streamlined the idle-setup code a bit. We do not call
-into schedule() before all processors have started up fully and all idle
-threads are in place.
-
-- the patch also cleans up a number of aspects of sched.c - moves code
-into other areas of the kernel where it's appropriate, and simplifies
-certain code paths and data constructs. As a result, the new scheduler's
-code is smaller than the old one.
-
-        Ingo
diff --git a/Documentation/scsi/ChangeLog.megaraid_sas b/Documentation/scsi/ChangeLog.megaraid_sas
index 91c81db0ba71..716fcc1cafb5 100644
--- a/Documentation/scsi/ChangeLog.megaraid_sas
+++ b/Documentation/scsi/ChangeLog.megaraid_sas
@@ -1,3 +1,25 @@
+1 Release Date    : Mon. March 10 11:02:31 PDT 2008 -
+                        (emaild-id:megaraidlinux@lsi.com)
+                        Sumant Patro
+                        Bo Yang
+
+2 Current Version : 00.00.03.20-RC1
+3 Older Version   : 00.00.03.16
+
+1. Rollback the sense info implementation
+        Sense buffer ptr data type in the ioctl path is reverted back
+        to u32 * as in previous versions of driver.
+
+2. Fixed the driver frame count.
+        When Driver sent wrong frame count to firmware.  As this
+        particular command is sent to drive, FW is seeing continuous
+        chip resets and so the command will timeout.
+
+3. Add the new controller(1078DE) support to the driver
+        and Increase the max_wait to 60 from 10 in the controller
+        operational status.  With this max_wait increase, driver will
+        make sure the FW will   finish the pending cmd for KDUMP case.
+
 1 Release Date    : Thur. Nov. 07 16:30:43 PST 2007 -
                         (emaild-id:megaraidlinux@lsi.com)
                         Sumant Patro
diff --git a/Documentation/vm/slabinfo.c b/Documentation/vm/slabinfo.c
index d3ce295bffac..e4230ed16ee7 100644
--- a/Documentation/vm/slabinfo.c
+++ b/Documentation/vm/slabinfo.c
@@ -38,7 +38,7 @@ struct slabinfo {
         unsigned long alloc_from_partial, alloc_slab, free_slab, alloc_refill;
         unsigned long cpuslab_flush, deactivate_full, deactivate_empty;
         unsigned long deactivate_to_head, deactivate_to_tail;
-        unsigned long deactivate_remote_frees;
+        unsigned long deactivate_remote_frees, order_fallback;
         int numa[MAX_NODES];
         int numa_partial[MAX_NODES];
 } slabinfo[MAX_SLABS];
@@ -293,7 +293,7 @@ int line = 0;
 void first_line(void)
 {
         if (show_activity)
-                printf("Name                   Objects    Alloc     Free   %%Fast\n");
+                printf("Name                   Objects      Alloc       Free   %%Fast Fallb O\n");
         else
                 printf("Name                   Objects Objsize    Space "
                         "Slabs/Part/Cpu  O/S O %%Fr %%Ef Flg\n");
@@ -573,11 +573,12 @@ void slabcache(struct slabinfo *s)
                 total_alloc = s->alloc_fastpath + s->alloc_slowpath;
                 total_free = s->free_fastpath + s->free_slowpath;
 
-                printf("%-21s %8ld %8ld %8ld %3ld %3ld \n",
+                printf("%-21s %8ld %10ld %10ld %3ld %3ld %5ld %1d\n",
                         s->name, s->objects,
                         total_alloc, total_free,
                         total_alloc ? (s->alloc_fastpath * 100 / total_alloc) : 0,
-                        total_free ? (s->free_fastpath * 100 / total_free) : 0);
+                        total_free ? (s->free_fastpath * 100 / total_free) : 0,
+                        s->order_fallback, s->order);
         }
         else
                 printf("%-21s %8ld %7d %8s %14s %4d %1d %3ld %3ld %s\n",
@@ -1188,6 +1189,7 @@ void read_slab_dir(void)
                         slab->deactivate_to_head = get_obj("deactivate_to_head");
                         slab->deactivate_to_tail = get_obj("deactivate_to_tail");
                         slab->deactivate_remote_frees = get_obj("deactivate_remote_frees");
+                        slab->order_fallback = get_obj("order_fallback");
                         chdir("..");
                         if (slab->name[0] == ':')
                                 alias_targets++;
diff --git a/MAINTAINERS b/MAINTAINERS
index c3a533d5d382..abe27871ad6a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1196,9 +1196,9 @@ S:	Maintained
 
 CPUSETS
 P:      Paul Jackson
-P:      Simon Derr
+P:      Paul Menage
 M:      pj@sgi.com
-M:      simon.derr@bull.net
+M:      menage@google.com
 L:      linux-kernel@vger.kernel.org
 W:      http://www.bullopensource.org/cpuset/
 S:      Supported
@@ -1557,6 +1557,14 @@ M:	raisch@de.ibm.com
 L:      general@lists.openfabrics.org
 S:      Supported
 
+EMBEDDED LINUX
+P:      Paul Gortmaker
+M:      paul.gortmaker@windriver.com
+P       David Woodhouse
+M:      dwmw2@infradead.org
+L:      linux-embedded@vger.kernel.org
+S:      Maintained
+
 EMULEX LPFC FC SCSI DRIVER
 P:      James Smart
 M:      james.smart@emulex.com
@@ -3122,7 +3130,7 @@ PCI SUBSYSTEM
 P:      Jesse Barnes
 M:      jbarnes@virtuousgeek.org
 L:      linux-kernel@vger.kernel.org
-L:      linux-pci@atrey.karlin.mff.cuni.cz
+L:      linux-pci@vger.kernel.org
 T:      git kernel.org:/pub/scm/linux/kernel/git/jbarnes/pci-2.6.git
 S:      Supported
 
@@ -4043,6 +4051,12 @@ L:      linux-usb@vger.kernel.org
 S:      Maintained
 W:      http://www.kroah.com/linux-usb/
 
+USB CYPRESS C67X00 DRIVER
+P:      Peter Korsgaard
+M:      jacmet@sunsite.dk
+L:      linux-usb@vger.kernel.org
+S:      Maintained
+
 USB DAVICOM DM9601 DRIVER
 P:      Peter Korsgaard
 M:      jacmet@sunsite.dk
diff --git a/Makefile b/Makefile
index d3634cd6fe35..4492984efc09 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
-SUBLEVEL = 25
-EXTRAVERSION =
+SUBLEVEL = 26
+EXTRAVERSION = -rc1
 NAME = Funky Weasel is Jiggy wit it
 
 # *DOCUMENTATION*
@@ -794,7 +794,7 @@ endif # ifdef CONFIG_KALLSYMS
 quiet_cmd_vmlinux-modpost = LD      $@
       cmd_vmlinux-modpost = $(LD) $(LDFLAGS) -r -o $@                          \
          $(vmlinux-init) --start-group $(vmlinux-main) --end-group             \
-         $(filter-out $(vmlinux-init) $(vmlinux-main) $(vmlinux-lds) FORCE ,$^)
+         $(filter-out $(vmlinux-init) $(vmlinux-main) FORCE ,$^)
 define rule_vmlinux-modpost
         :
         +$(call cmd,vmlinux-modpost)
@@ -818,7 +818,9 @@ endif
 ifdef CONFIG_KALLSYMS
 .tmp_vmlinux1: vmlinux.o
 endif
-vmlinux.o: $(vmlinux-lds) $(vmlinux-init) $(vmlinux-main) FORCE
+
+modpost-init := $(filter-out init/built-in.o, $(vmlinux-init))
+vmlinux.o: $(modpost-init) $(vmlinux-main) FORCE
         $(call if_changed_rule,vmlinux-modpost)
 
 # The actual objects are generated when descending, 
diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c
index 9fee37e2596f..32ca1b927307 100644
--- a/arch/alpha/kernel/osf_sys.c
+++ b/arch/alpha/kernel/osf_sys.c
@@ -981,27 +981,18 @@ asmlinkage int
 osf_select(int n, fd_set __user *inp, fd_set __user *outp, fd_set __user *exp,
            struct timeval32 __user *tvp)
 {
-        fd_set_bits fds;
-        char *bits;
-        size_t size;
-        long timeout;
-        int ret = -EINVAL;
-        struct fdtable *fdt;
-        int max_fds;
-
-        timeout = MAX_SCHEDULE_TIMEOUT;
+        s64 timeout = MAX_SCHEDULE_TIMEOUT;
         if (tvp) {
                 time_t sec, usec;
 
                 if (!access_ok(VERIFY_READ, tvp, sizeof(*tvp))
                     || __get_user(sec, &tvp->tv_sec)
                     || __get_user(usec, &tvp->tv_usec)) {
-                        ret = -EFAULT;
-                        goto out_nofds;
+                        return -EFAULT;
                 }
 
                 if (sec < 0 || usec < 0)
-                        goto out_nofds;
+                        return -EINVAL;
 
                 if ((unsigned long) sec < MAX_SELECT_SECONDS) {
                         timeout = (usec + 1000000/HZ - 1) / (1000000/HZ);
@@ -1009,60 +1000,8 @@ osf_select(int n, fd_set __user *inp, fd_set __user *outp, fd_set __user *exp,
                 }
         }
 
-        rcu_read_lock();
-        fdt = files_fdtable(current->files);
-        max_fds = fdt->max_fds;
-        rcu_read_unlock();
-        if (n < 0 || n > max_fds)
-                goto out_nofds;
-
-        /*
-         * We need 6 bitmaps (in/out/ex for both incoming and outgoing),
-         * since we used fdset we need to allocate memory in units of
-         * long-words. 
-         */
-        ret = -ENOMEM;
-        size = FDS_BYTES(n);
-        bits = kmalloc(6 * size, GFP_KERNEL);
-        if (!bits)
-                goto out_nofds;
-        fds.in      = (unsigned long *)  bits;
-        fds.out     = (unsigned long *) (bits +   size);
-        fds.ex      = (unsigned long *) (bits + 2*size);
-        fds.res_in  = (unsigned long *) (bits + 3*size);
-        fds.res_out = (unsigned long *) (bits + 4*size);
-        fds.res_ex  = (unsigned long *) (bits + 5*size);
-
-        if ((ret = get_fd_set(n, inp->fds_bits, fds.in)) ||
-            (ret = get_fd_set(n, outp->fds_bits, fds.out)) ||
-            (ret = get_fd_set(n, exp->fds_bits, fds.ex)))
-                goto out;
-        zero_fd_set(n, fds.res_in);
-        zero_fd_set(n, fds.res_out);
-        zero_fd_set(n, fds.res_ex);
-
-        ret = do_select(n, &fds, &timeout);
-
         /* OSF does not copy back the remaining time.  */
-
-        if (ret < 0)
-                goto out;
-        if (!ret) {
-                ret = -ERESTARTNOHAND;
-                if (signal_pending(current))
-                        goto out;
-                ret = 0;
-        }
-
-        if (set_fd_set(n, inp->fds_bits, fds.res_in) ||
-            set_fd_set(n, outp->fds_bits, fds.res_out) ||
-            set_fd_set(n, exp->fds_bits, fds.res_ex))
-                ret = -EFAULT;
-
- out:
-        kfree(bits);
- out_nofds:
-        return ret;
+        return core_sys_select(n, inp, outp, exp, &timeout);
 }
 
 struct rusage32 {
diff --git a/arch/arm/kernel/sys_arm.c b/arch/arm/kernel/sys_arm.c
index 9bd1870d980e..0128687ba0f7 100644
--- a/arch/arm/kernel/sys_arm.c
+++ b/arch/arm/kernel/sys_arm.c
@@ -34,23 +34,6 @@ extern unsigned long do_mremap(unsigned long addr, unsigned long old_len,
                                unsigned long new_len, unsigned long flags,
                                unsigned long new_addr);
 
-/*
- * sys_pipe() is the normal C calling standard for creating
- * a pipe. It's not the way unix traditionally does this, though.
- */
-asmlinkage int sys_pipe(unsigned long __user *fildes)
-{
-        int fd[2];
-        int error;
-
-        error = do_pipe(fd);
-        if (!error) {
-                if (copy_to_user(fildes, fd, 2*sizeof(int)))
-                        error = -EFAULT;
-        }
-        return error;
-}
-
 /* common code for old and new mmaps */
 inline long do_mmap2(
         unsigned long addr, unsigned long len,
diff --git a/arch/avr32/kernel/sys_avr32.c b/arch/avr32/kernel/sys_avr32.c
index 8deb6003ee62..8e8911e55c8f 100644
--- a/arch/avr32/kernel/sys_avr32.c
+++ b/arch/avr32/kernel/sys_avr32.c
@@ -14,19 +14,6 @@
 #include <asm/mman.h>
 #include <asm/uaccess.h>
 
-asmlinkage int sys_pipe(unsigned long __user *filedes)
-{
-        int fd[2];
-        int error;
-
-        error = do_pipe(fd);
-        if (!error) {
-                if (copy_to_user(filedes, fd, sizeof(fd)))
-                        error = -EFAULT;
-        }
-        return error;
-}
-
 asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
                           unsigned long prot, unsigned long flags,
                           unsigned long fd, off_t offset)
diff --git a/arch/blackfin/kernel/sys_bfin.c b/arch/blackfin/kernel/sys_bfin.c
index efb7b25a2633..fce49d7cf001 100644
--- a/arch/blackfin/kernel/sys_bfin.c
+++ b/arch/blackfin/kernel/sys_bfin.c
@@ -45,23 +45,6 @@
 #include <asm/cacheflush.h>
 #include <asm/dma.h>
 
-/*
- * sys_pipe() is the normal C calling standard for creating
- * a pipe. It's not the way unix traditionally does this, though.
- */
-asmlinkage int sys_pipe(unsigned long __user *fildes)
-{
-        int fd[2];
-        int error;
-
-        error = do_pipe(fd);
-        if (!error) {
-                if (copy_to_user(fildes, fd, 2 * sizeof(int)))
-                        error = -EFAULT;
-        }
-        return error;
-}
-
 /* common code for old and new mmaps */
 static inline long
 do_mmap2(unsigned long addr, unsigned long len,
diff --git a/arch/frv/kernel/sys_frv.c b/arch/frv/kernel/sys_frv.c
index 04c6b1677ccf..49b2cf2c38f3 100644
--- a/arch/frv/kernel/sys_frv.c
+++ b/arch/frv/kernel/sys_frv.c
@@ -28,23 +28,6 @@
 #include <asm/setup.h>
 #include <asm/uaccess.h>
 
-/*
- * sys_pipe() is the normal C calling standard for creating
- * a pipe. It's not the way unix traditionally does this, though.
- */
-asmlinkage long sys_pipe(unsigned long __user * fildes)
-{
-        int fd[2];
-        int error;
-
-        error = do_pipe(fd);
-        if (!error) {
-                if (copy_to_user(fildes, fd, 2*sizeof(int)))
-                        error = -EFAULT;
-        }
-        return error;
-}
-
 asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
                           unsigned long prot, unsigned long flags,
                           unsigned long fd, unsigned long pgoff)
diff --git a/arch/frv/mm/Makefile b/arch/frv/mm/Makefile
index fb8b1d860f46..1bca5ab8a6ab 100644
--- a/arch/frv/mm/Makefile
+++ b/arch/frv/mm/Makefile
@@ -6,4 +6,4 @@ obj-y := init.o kmap.o
 
 obj-$(CONFIG_MMU) += \
         pgalloc.o highmem.o fault.o extable.o cache-page.o tlb-flush.o tlb-miss.o \
-        mmu-context.o dma-alloc.o unaligned.o elf-fdpic.o
+        mmu-context.o dma-alloc.o elf-fdpic.o
diff --git a/arch/h8300/kernel/sys_h8300.c b/arch/h8300/kernel/sys_h8300.c
index 00608be6d567..2745656dcc52 100644
--- a/arch/h8300/kernel/sys_h8300.c
+++ b/arch/h8300/kernel/sys_h8300.c
@@ -27,23 +27,6 @@
 #include <asm/traps.h>
 #include <asm/unistd.h>
 
-/*
- * sys_pipe() is the normal C calling standard for creating
- * a pipe. It's not the way unix traditionally does this, though.
- */
-asmlinkage int sys_pipe(unsigned long * fildes)
-{
-        int fd[2];
-        int error;
-
-        error = do_pipe(fd);
-        if (!error) {
-                if (copy_to_user(fildes, fd, 2*sizeof(int)))
-                        error = -EFAULT;
-        }
-        return error;
-}
-
 /* common code for old and new mmaps */
 static inline long do_mmap2(
         unsigned long addr, unsigned long len,
diff --git a/arch/ia64/ia32/ia32_signal.c b/arch/ia64/ia32/ia32_signal.c
index 256a7faeda07..b763ca19ef17 100644
--- a/arch/ia64/ia32/ia32_signal.c
+++ b/arch/ia64/ia32/ia32_signal.c
@@ -463,7 +463,7 @@ sys32_sigsuspend (int history0, int history1, old_sigset_t mask)
 
         current->state = TASK_INTERRUPTIBLE;
         schedule();
-        set_thread_flag(TIF_RESTORE_SIGMASK);
+        set_restore_sigmask();
         return -ERESTARTNOHAND;
 }
 
diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c
index c7467f863c7a..19709a079635 100644
--- a/arch/ia64/kernel/acpi.c
+++ b/arch/ia64/kernel/acpi.c
@@ -966,7 +966,7 @@ acpi_map_iosapics (void)
 fs_initcall(acpi_map_iosapics);
 #endif                          /* CONFIG_ACPI_NUMA */
 
-int acpi_register_ioapic(acpi_handle handle, u64 phys_addr, u32 gsi_base)
+int __ref acpi_register_ioapic(acpi_handle handle, u64 phys_addr, u32 gsi_base)
 {
         int err;
 
diff --git a/arch/ia64/kernel/irq.c b/arch/ia64/kernel/irq.c
index 6dee579f205f..7fd18f54c056 100644
--- a/arch/ia64/kernel/irq.c
+++ b/arch/ia64/kernel/irq.c
@@ -183,10 +183,10 @@ void fixup_irqs(void)
 {
         unsigned int irq;
         extern void ia64_process_pending_intr(void);
-        extern void ia64_disable_timer(void);
         extern volatile int time_keeper_id;
 
-        ia64_disable_timer();
+        /* Mask ITV to disable timer */
+        ia64_set_itv(1 << 16);
 
         /*
          * Find a new timesync master
diff --git a/arch/ia64/kernel/palinfo.c b/arch/ia64/kernel/palinfo.c
index 396004e8cd14..4547a2092af9 100644
--- a/arch/ia64/kernel/palinfo.c
+++ b/arch/ia64/kernel/palinfo.c
@@ -1053,7 +1053,7 @@ static int __cpuinit palinfo_cpu_callback(struct notifier_block *nfb,
         return NOTIFY_OK;
 }
 
-static struct notifier_block palinfo_cpu_notifier __cpuinitdata =
+static struct notifier_block __refdata palinfo_cpu_notifier =
 {
         .notifier_call = palinfo_cpu_callback,
         .priority = 0,
diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c
index 7fbb51e10bbe..c1ad27de2dd2 100644
--- a/arch/ia64/kernel/perfmon.c
+++ b/arch/ia64/kernel/perfmon.c
@@ -867,7 +867,7 @@ pfm_rvfree(void *mem, unsigned long size)
 }
 
 static pfm_context_t *
-pfm_context_alloc(void)
+pfm_context_alloc(int ctx_flags)
 {
         pfm_context_t *ctx;
 
@@ -878,6 +878,46 @@ pfm_context_alloc(void)
         ctx = kzalloc(sizeof(pfm_context_t), GFP_KERNEL);
         if (ctx) {
                 DPRINT(("alloc ctx @%p\n", ctx));
+
+                /*
+                 * init context protection lock
+                 */
+                spin_lock_init(&ctx->ctx_lock);
+
+                /*
+                 * context is unloaded
+                 */
+                ctx->ctx_state = PFM_CTX_UNLOADED;
+
+                /*
+                 * initialization of context's flags
+                 */
+                ctx->ctx_fl_block       = (ctx_flags & PFM_FL_NOTIFY_BLOCK) ? 1 : 0;
+                ctx->ctx_fl_system      = (ctx_flags & PFM_FL_SYSTEM_WIDE) ? 1: 0;
+                ctx->ctx_fl_no_msg      = (ctx_flags & PFM_FL_OVFL_NO_MSG) ? 1: 0;
+                /*
+                 * will move to set properties
+                 * ctx->ctx_fl_excl_idle   = (ctx_flags & PFM_FL_EXCL_IDLE) ? 1: 0;
+                 */
+
+                /*
+                 * init restart semaphore to locked
+                 */
+                init_completion(&ctx->ctx_restart_done);
+
+                /*
+                 * activation is used in SMP only
+                 */
+                ctx->ctx_last_activation = PFM_INVALID_ACTIVATION;
+                SET_LAST_CPU(ctx, -1);
+
+                /*
+                 * initialize notification message queue
+                 */
+                ctx->ctx_msgq_head = ctx->ctx_msgq_tail = 0;
+                init_waitqueue_head(&ctx->ctx_msgq_wait);
+                init_waitqueue_head(&ctx->ctx_zombieq);
+
         }
         return ctx;
 }
@@ -2165,28 +2205,21 @@ static struct dentry_operations pfmfs_dentry_operations = {
 };
 
 
-static int
-pfm_alloc_fd(struct file **cfile)
+static struct file *
+pfm_alloc_file(pfm_context_t *ctx)
 {
-        int fd, ret = 0;
-        struct file *file = NULL;
-        struct inode * inode;
+        struct file *file;
+        struct inode *inode;
+        struct dentry *dentry;
         char name[32];
         struct qstr this;
 
-        fd = get_unused_fd();
-        if (fd < 0) return -ENFILE;
-
-        ret = -ENFILE;
-
-        file = get_empty_filp();
-        if (!file) goto out;
-
         /*
          * allocate a new inode
          */
         inode = new_inode(pfmfs_mnt->mnt_sb);
-        if (!inode) goto out;
+        if (!inode)
+                return ERR_PTR(-ENOMEM);
 
         DPRINT(("new inode ino=%ld @%p\n", inode->i_ino, inode));
 
@@ -2199,59 +2232,28 @@ pfm_alloc_fd(struct file **cfile)
         this.len  = strlen(name);
         this.hash = inode->i_ino;
 
-        ret = -ENOMEM;
-
         /*
          * allocate a new dcache entry
          */
-        file->f_path.dentry = d_alloc(pfmfs_mnt->mnt_sb->s_root, &this);
-        if (!file->f_path.dentry) goto out;
+        dentry = d_alloc(pfmfs_mnt->mnt_sb->s_root, &this);
+        if (!dentry) {
+                iput(inode);
+                return ERR_PTR(-ENOMEM);
+        }
 
-        file->f_path.dentry->d_op = &pfmfs_dentry_operations;
+        dentry->d_op = &pfmfs_dentry_operations;
+        d_add(dentry, inode);
 
-        d_add(file->f_path.dentry, inode);
-        file->f_path.mnt = mntget(pfmfs_mnt);
-        file->f_mapping = inode->i_mapping;
+        file = alloc_file(pfmfs_mnt, dentry, FMODE_READ, &pfm_file_ops);
+        if (!file) {
+                dput(dentry);
+                return ERR_PTR(-ENFILE);
+        }
 
-        file->f_op    = &pfm_file_ops;
-        file->f_mode  = FMODE_READ;
         file->f_flags = O_RDONLY;
-        file->f_pos   = 0;
-
-        /*
-         * may have to delay until context is attached?
-         */
-        fd_install(fd, file);
-
-        /*
-         * the file structure we will use
-         */
-        *cfile = file;
-
-        return fd;
-out:
-        if (file) put_filp(file);
-        put_unused_fd(fd);
-        return ret;
-}
-
-static void
-pfm_free_fd(int fd, struct file *file)
-{
-        struct files_struct *files = current->files;
-        struct fdtable *fdt;
+        file->private_data = ctx;
 
-        /* 
-         * there ie no fd_uninstall(), so we do it here
-         */
-        spin_lock(&files->file_lock);
-        fdt = files_fdtable(files);
-        rcu_assign_pointer(fdt->fd[fd], NULL);
-        spin_unlock(&files->file_lock);
-
-        if (file)
-                put_filp(file);
-        put_unused_fd(fd);
+        return file;
 }
 
 static int
@@ -2475,6 +2477,7 @@ pfm_setup_buffer_fmt(struct task_struct *task, struct file *filp, pfm_context_t
 
         /* link buffer format and context */
         ctx->ctx_buf_fmt = fmt;
+        ctx->ctx_fl_is_sampling = 1; /* assume record() is defined */
 
         /*
          * check if buffer format wants to use perfmon buffer allocation/mapping service
@@ -2669,78 +2672,45 @@ pfm_context_create(pfm_context_t *ctx, void *arg, int count, struct pt_regs *reg
 {
         pfarg_context_t *req = (pfarg_context_t *)arg;
         struct file *filp;
+        struct path path;
         int ctx_flags;
+        int fd;
         int ret;
 
         /* let's check the arguments first */
         ret = pfarg_is_sane(current, req);
-        if (ret < 0) return ret;
+        if (ret < 0)
+                return ret;
 
         ctx_flags = req->ctx_flags;
 
         ret = -ENOMEM;
 
-        ctx = pfm_context_alloc();
-        if (!ctx) goto error;
+        fd = get_unused_fd();
+        if (fd < 0)
+                return fd;
 
-        ret = pfm_alloc_fd(&filp);
-        if (ret < 0) goto error_file;
+        ctx = pfm_context_alloc(ctx_flags);
+        if (!ctx)
+                goto error;
 
-        req->ctx_fd = ctx->ctx_fd = ret;
+        filp = pfm_alloc_file(ctx);
+        if (IS_ERR(filp)) {
+                ret = PTR_ERR(filp);
+                goto error_file;
+        }
 
-        /*
-         * attach context to file
-         */
-        filp->private_data = ctx;
+        req->ctx_fd = ctx->ctx_fd = fd;
 
         /*
          * does the user want to sample?
          */
         if (pfm_uuid_cmp(req->ctx_smpl_buf_id, pfm_null_uuid)) {
                 ret = pfm_setup_buffer_fmt(current, filp, ctx, ctx_flags, 0, req);
-                if (ret) goto buffer_error;
+                if (ret)
+                        goto buffer_error;
         }
 
-        /*
-         * init context protection lock
-         */
-        spin_lock_init(&ctx->ctx_lock);
-
-        /*
-         * context is unloaded
-         */
-        ctx->ctx_state = PFM_CTX_UNLOADED;
-
-        /*
-         * initialization of context's flags
-         */
-        ctx->ctx_fl_block       = (ctx_flags & PFM_FL_NOTIFY_BLOCK) ? 1 : 0;
-        ctx->ctx_fl_system      = (ctx_flags & PFM_FL_SYSTEM_WIDE) ? 1: 0;
-        ctx->ctx_fl_is_sampling = ctx->ctx_buf_fmt ? 1 : 0; /* assume record() is defined */
-        ctx->ctx_fl_no_msg      = (ctx_flags & PFM_FL_OVFL_NO_MSG) ? 1: 0;
-        /*
-         * will move to set properties
-         * ctx->ctx_fl_excl_idle   = (ctx_flags & PFM_FL_EXCL_IDLE) ? 1: 0;
-         */
-
-        /*
-         * init restart semaphore to locked
-         */
-        init_completion(&ctx->ctx_restart_done);
-
-        /*
-         * activation is used in SMP only
-         */
-        ctx->ctx_last_activation = PFM_INVALID_ACTIVATION;
-        SET_LAST_CPU(ctx, -1);
-
-        /*
-         * initialize notification message queue
-         */
-        ctx->ctx_msgq_head = ctx->ctx_msgq_tail = 0;
-        init_waitqueue_head(&ctx->ctx_msgq_wait);
-        init_waitqueue_head(&ctx->ctx_zombieq);
-
         DPRINT(("ctx=%p flags=0x%x system=%d notify_block=%d excl_idle=%d no_msg=%d ctx_fd=%d \n",
                 ctx,
                 ctx_flags,
@@ -2755,10 +2725,14 @@ pfm_context_create(pfm_context_t *ctx, void *arg, int count, struct pt_regs *reg
          */
         pfm_reset_pmu_state(ctx);
 
+        fd_install(fd, filp);
+
         return 0;
 
 buffer_error:
-        pfm_free_fd(ctx->ctx_fd, filp);
+        path = filp->f_path;
+        put_filp(filp);
+        path_put(&path);
 
         if (ctx->ctx_buf_fmt) {
                 pfm_buf_fmt_exit(ctx->ctx_buf_fmt, current, NULL, regs);
@@ -2767,6 +2741,7 @@ error_file:
         pfm_context_free(ctx);
 
 error:
+        put_unused_fd(fd);
         return ret;
 }
 
diff --git a/arch/ia64/kernel/signal.c b/arch/ia64/kernel/signal.c
index 5740296c35af..19c5a78636fc 100644
--- a/arch/ia64/kernel/signal.c
+++ b/arch/ia64/kernel/signal.c
@@ -464,7 +464,7 @@ ia64_do_signal (struct sigscratch *scr, long in_syscall)
         if (!user_mode(&scr->pt))
                 return;
 
-        if (test_thread_flag(TIF_RESTORE_SIGMASK))
+        if (current_thread_info()->status & TS_RESTORE_SIGMASK)
                 oldset = &current->saved_sigmask;
         else
                 oldset = &current->blocked;
@@ -530,12 +530,13 @@ ia64_do_signal (struct sigscratch *scr, long in_syscall)
                  * continue to iterate in this loop so we can deliver the SIGSEGV...
                  */
                 if (handle_signal(signr, &ka, &info, oldset, scr)) {
-                        /* a signal was successfully delivered; the saved
+                        /*
+                         * A signal was successfully delivered; the saved
                          * sigmask will have been stored in the signal frame,
                          * and will be restored by sigreturn, so we can simply
-                         * clear the TIF_RESTORE_SIGMASK flag */
-                        if (test_thread_flag(TIF_RESTORE_SIGMASK))
-                                clear_thread_flag(TIF_RESTORE_SIGMASK);
+                         * clear the TS_RESTORE_SIGMASK flag.
+                         */
+                        current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
                         return;
                 }
         }
@@ -566,8 +567,8 @@ ia64_do_signal (struct sigscratch *scr, long in_syscall)
 
         /* if there's no signal to deliver, we just put the saved sigmask
          * back */
-        if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
-                clear_thread_flag(TIF_RESTORE_SIGMASK);
+        if (current_thread_info()->status & TS_RESTORE_SIGMASK) {
+                current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
                 sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
         }
 }
diff --git a/arch/ia64/kernel/smp.c b/arch/ia64/kernel/smp.c
index 9a9d4c489330..983296f1c813 100644
--- a/arch/ia64/kernel/smp.c
+++ b/arch/ia64/kernel/smp.c
@@ -98,8 +98,33 @@ unlock_ipi_calllock(void)
         spin_unlock_irq(&call_lock);
 }
 
+static inline void
+handle_call_data(void)
+{
+        struct call_data_struct *data;
+        void (*func)(void *info);
+        void *info;
+        int wait;
+
+        /* release the 'pointer lock' */
+        data = (struct call_data_struct *)call_data;
+        func = data->func;
+        info = data->info;
+        wait = data->wait;
+
+        mb();
+        atomic_inc(&data->started);
+        /* At this point the structure may be gone unless wait is true. */
+        (*func)(info);
+
+        /* Notify the sending CPU that the task is done. */
+        mb();
+        if (wait)
+                atomic_inc(&data->finished);
+}
+
 static void
-stop_this_cpu (void)
+stop_this_cpu(void)
 {
         /*
          * Remove this CPU:
@@ -138,44 +163,21 @@ handle_IPI (int irq, void *dev_id)
                         ops &= ~(1 << which);
 
                         switch (which) {
-                              case IPI_CALL_FUNC:
-                              {
-                                      struct call_data_struct *data;
-                                      void (*func)(void *info);
-                                      void *info;
-                                      int wait;
-
-                                      /* release the 'pointer lock' */
-                                      data = (struct call_data_struct *) call_data;
-                                      func = data->func;
-                                      info = data->info;
-                                      wait = data->wait;
-
-                                      mb();
-                                      atomic_inc(&data->started);
-                                      /*
-                                       * At this point the structure may be gone unless
-                                       * wait is true.
-                                       */
-                                      (*func)(info);
-
-                                      /* Notify the sending CPU that the task is done.  */
-                                      mb();
-                                      if (wait)
-                                              atomic_inc(&data->finished);
-                              }
-                              break;
-
-                              case IPI_CPU_STOP:
+                        case IPI_CALL_FUNC:
+                                handle_call_data();
+                                break;
+
+                        case IPI_CPU_STOP:
                                 stop_this_cpu();
                                 break;
 #ifdef CONFIG_KEXEC
-                              case IPI_KDUMP_CPU_STOP:
+                        case IPI_KDUMP_CPU_STOP:
                                 unw_init_running(kdump_cpu_freeze, NULL);
                                 break;
 #endif
-                              default:
-                                printk(KERN_CRIT "Unknown IPI on CPU %d: %lu\n", this_cpu, which);
+                        default:
+                                printk(KERN_CRIT "Unknown IPI on CPU %d: %lu\n",
+                                                this_cpu, which);
                                 break;
                         }
                 } while (ops);
diff --git a/arch/ia64/kernel/time.c b/arch/ia64/kernel/time.c
index 48e15a51782f..8c73643f2d66 100644
--- a/arch/ia64/kernel/time.c
+++ b/arch/ia64/kernel/time.c
@@ -379,11 +379,6 @@ static struct irqaction timer_irqaction = {
         .name =         "timer"
 };
 
-void __devinit ia64_disable_timer(void)
-{
-        ia64_set_itv(1 << 16);
-}
-
 void __init
 time_init (void)
 {
diff --git a/arch/ia64/kernel/topology.c b/arch/ia64/kernel/topology.c
index abb17a613b17..26228e2d01ae 100644
--- a/arch/ia64/kernel/topology.c
+++ b/arch/ia64/kernel/topology.c
@@ -36,9 +36,11 @@ void arch_fix_phys_package_id(int num, u32 slot)
 }
 EXPORT_SYMBOL_GPL(arch_fix_phys_package_id);
 
-int arch_register_cpu(int num)
+
+#ifdef CONFIG_HOTPLUG_CPU
+int __ref arch_register_cpu(int num)
 {
-#if defined (CONFIG_ACPI) && defined (CONFIG_HOTPLUG_CPU)
+#ifdef CONFIG_ACPI
         /*
          * If CPEI can be re-targetted or if this is not
          * CPEI target, then it is hotpluggable
@@ -47,19 +49,21 @@ int arch_register_cpu(int num)
                 sysfs_cpus[num].cpu.hotpluggable = 1;
         map_cpu_to_node(num, node_cpuid[num].nid);
 #endif
-
         return register_cpu(&sysfs_cpus[num].cpu, num);
 }
-
-#ifdef CONFIG_HOTPLUG_CPU
+EXPORT_SYMBOL(arch_register_cpu);
 
 void arch_unregister_cpu(int num)
 {
         unregister_cpu(&sysfs_cpus[num].cpu);
         unmap_cpu_from_node(num, cpu_to_node(num));
 }
-EXPORT_SYMBOL(arch_register_cpu);
 EXPORT_SYMBOL(arch_unregister_cpu);
+#else
+static int __init arch_register_cpu(int num)
+{
+        return register_cpu(&sysfs_cpus[num].cpu, num);
+}
 #endif /*CONFIG_HOTPLUG_CPU*/
 
 
diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c
index 6df073240135..318b81100623 100644
--- a/arch/ia64/kvm/kvm-ia64.c
+++ b/arch/ia64/kvm/kvm-ia64.c
@@ -1,4 +1,3 @@
-
 /*
  * kvm_ia64.c: Basic KVM suppport On Itanium series processors
  *
@@ -431,7 +430,7 @@ int kvm_emulate_halt(struct kvm_vcpu *vcpu)
         if (itc_diff < 0)
                 itc_diff = -itc_diff;
 
-        expires = div64_64(itc_diff, cyc_per_usec);
+        expires = div64_u64(itc_diff, cyc_per_usec);
         kt = ktime_set(0, 1000 * expires);
         vcpu->arch.ht_active = 1;
         hrtimer_start(p_ht, kt, HRTIMER_MODE_ABS);
diff --git a/arch/m32r/Makefile b/arch/m32r/Makefile
index 4072a07ebf8e..469766b24e22 100644
--- a/arch/m32r/Makefile
+++ b/arch/m32r/Makefile
@@ -5,6 +5,8 @@
 # architecture-specific flags and dependencies.
 #
 
+KBUILD_DEFCONFIG := m32700ut.smp_defconfig
+
 LDFLAGS         :=
 OBJCOPYFLAGS    := -O binary -R .note -R .comment -S
 LDFLAGS_vmlinux :=
diff --git a/arch/m32r/defconfig b/arch/m32r/defconfig
deleted file mode 100644
index af3b98179113..000000000000
--- a/arch/m32r/defconfig
+++ /dev/null
@@ -1,863 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc1
-# Wed Aug  1 17:22:35 2007
-#
-CONFIG_M32R=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_NO_IOPORT=y
-CONFIG_NO_DMA=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=15
-# CONFIG_CPUSETS is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-# CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-# CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
-# CONFIG_EPOLL is not set
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# Processor type and features
-#
-# CONFIG_PLAT_MAPPI is not set
-# CONFIG_PLAT_USRV is not set
-CONFIG_PLAT_M32700UT=y
-# CONFIG_PLAT_OPSPUT is not set
-# CONFIG_PLAT_OAKS32R is not set
-# CONFIG_PLAT_MAPPI2 is not set
-# CONFIG_PLAT_MAPPI3 is not set
-# CONFIG_PLAT_M32104UT is not set
-CONFIG_CHIP_M32700=y
-# CONFIG_CHIP_M32102 is not set
-# CONFIG_CHIP_M32104 is not set
-# CONFIG_CHIP_VDEC2 is not set
-# CONFIG_CHIP_OPSP is not set
-CONFIG_MMU=y
-CONFIG_TLB_ENTRIES=32
-CONFIG_ISA_M32R2=y
-CONFIG_ISA_DSP_LEVEL2=y
-CONFIG_ISA_DUAL_ISSUE=y
-CONFIG_BUS_CLOCK=50000000
-CONFIG_TIMER_DIVIDE=128
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-CONFIG_MEMORY_START=0x08000000
-CONFIG_MEMORY_SIZE=0x01000000
-CONFIG_NOHIGHMEM=y
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM_MANUAL=y
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_IRAM_START=0x00f00000
-CONFIG_IRAM_SIZE=0x00080000
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_PREEMPT=y
-CONFIG_SMP=y
-# CONFIG_CHIP_M32700_TS1 is not set
-CONFIG_NR_CPUS=2
-CONFIG_NODES_SHIFT=1
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_ISA is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-# CONFIG_MTD_CHAR is not set
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=m
-CONFIG_MTD_JEDECPROBE=m
-CONFIG_MTD_GEN_PROBE=m
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-# CONFIG_MTD_CFI_NOSWAP is not set
-CONFIG_MTD_CFI_BE_BYTE_SWAP=y
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-# CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CFI_AMDSTD=m
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=m
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-CONFIG_ATA_OVER_ETH=m
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECD=m
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDEPCI_PCIBUS_ORDER is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=m
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_MD is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_SMC91X=y
-# CONFIG_NE2000 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_M32R_SIO=y
-CONFIG_SERIAL_M32R_SIO_CONSOLE=y
-CONFIG_SERIAL_M32R_PLDSIO=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_RTC is not set
-CONFIG_DS1302=y
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-# CONFIG_VIDEO_CPIA is not set
-CONFIG_VIDEO_M32R_AR=m
-CONFIG_VIDEO_M32R_AR_M64278=m
-CONFIG_RADIO_ADAPTERS=y
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-CONFIG_FB_S1D13XXX=y
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-CONFIG_LOGO_M32R_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-CONFIG_MMC=y
-CONFIG_MMC_DEBUG=y
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-
-#
-# MMC/SD Host Controller Drivers
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# Real Time Clock
-#
-# CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-CONFIG_JBD_DEBUG=y
-CONFIG_FS_MBCACHE=y
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_REISERFS_FS_XATTR is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_FRAME_POINTER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_HAS_IOMEM=y
diff --git a/arch/m32r/kernel/vmlinux.lds.S b/arch/m32r/kernel/vmlinux.lds.S
index 41b07854fcc6..15a6f36c06db 100644
--- a/arch/m32r/kernel/vmlinux.lds.S
+++ b/arch/m32r/kernel/vmlinux.lds.S
@@ -60,9 +60,6 @@ SECTIONS
   . = ALIGN(4096);
   __nosave_end = .;
 
-  . = ALIGN(4096);
-  .data.page_aligned : { *(.data.idt) }
-
   . = ALIGN(32);
   .data.cacheline_aligned : { *(.data.cacheline_aligned) }
 
diff --git a/arch/m68k/kernel/sys_m68k.c b/arch/m68k/kernel/sys_m68k.c
index e892f17ba3fa..7f54efaf60bb 100644
--- a/arch/m68k/kernel/sys_m68k.c
+++ b/arch/m68k/kernel/sys_m68k.c
@@ -30,23 +30,6 @@
 #include <asm/page.h>
 #include <asm/unistd.h>
 
-/*
- * sys_pipe() is the normal C calling standard for creating
- * a pipe. It's not the way unix traditionally does this, though.
- */
-asmlinkage int sys_pipe(unsigned long __user * fildes)
-{
-        int fd[2];
-        int error;
-
-        error = do_pipe(fd);
-        if (!error) {
-                if (copy_to_user(fildes, fd, 2*sizeof(int)))
-                        error = -EFAULT;
-        }
-        return error;
-}
-
 /* common code for old and new mmaps */
 static inline long do_mmap2(
         unsigned long addr, unsigned long len,
diff --git a/arch/m68k/kernel/traps.c b/arch/m68k/kernel/traps.c
index fd4858e2dd63..75b8340b254b 100644
--- a/arch/m68k/kernel/traps.c
+++ b/arch/m68k/kernel/traps.c
@@ -468,15 +468,26 @@ static inline void access_error040(struct frame *fp)
                          * (if do_page_fault didn't fix the mapping,
                          * the writeback won't do good)
                          */
+disable_wb:
 #ifdef DEBUG
                         printk(".. disabling wb2\n");
 #endif
                         if (fp->un.fmt7.wb2a == fp->un.fmt7.faddr)
                                 fp->un.fmt7.wb2s &= ~WBV_040;
+                        if (fp->un.fmt7.wb3a == fp->un.fmt7.faddr)
+                                fp->un.fmt7.wb3s &= ~WBV_040;
                 }
-        } else if (send_fault_sig(&fp->ptregs) > 0) {
-                printk("68040 access error, ssw=%x\n", ssw);
-                trap_c(fp);
+        } else {
+                /* In case of a bus error we either kill the process or expect
+                 * the kernel to catch the fault, which then is also responsible
+                 * for cleaning up the mess.
+                 */
+                current->thread.signo = SIGBUS;
+                current->thread.faddr = fp->un.fmt7.faddr;
+                if (send_fault_sig(&fp->ptregs) >= 0)
+                        printk("68040 bus error (ssw=%x, faddr=%lx)\n", ssw,
+                               fp->un.fmt7.faddr);
+                goto disable_wb;
         }
 
         do_040writebacks(fp);
diff --git a/arch/m68k/mac/config.c b/arch/m68k/mac/config.c
index 735a49b4b936..ad3e3bacae39 100644
--- a/arch/m68k/mac/config.c
+++ b/arch/m68k/mac/config.c
@@ -48,9 +48,6 @@
 struct mac_booter_data mac_bi_data;
 int mac_bisize = sizeof mac_bi_data;
 
-struct mac_hw_present mac_hw_present;
-EXPORT_SYMBOL(mac_hw_present);
-
 /* New m68k bootinfo stuff and videobase */
 
 extern int m68k_num_memory;
@@ -817,27 +814,6 @@ void __init mac_identify(void)
                 m68k_ramdisk.addr, m68k_ramdisk.size);
 #endif
 
-        /*
-         * TODO: set the various fields in macintosh_config->hw_present here!
-         */
-        switch (macintosh_config->scsi_type) {
-        case MAC_SCSI_OLD:
-                MACHW_SET(MAC_SCSI_80);
-                break;
-        case MAC_SCSI_QUADRA:
-        case MAC_SCSI_QUADRA2:
-        case MAC_SCSI_QUADRA3:
-                MACHW_SET(MAC_SCSI_96);
-                if ((macintosh_config->ident == MAC_MODEL_Q900) ||
-                    (macintosh_config->ident == MAC_MODEL_Q950))
-                        MACHW_SET(MAC_SCSI_96_2);
-                break;
-        default:
-                printk(KERN_WARNING "config.c: wtf: unknown scsi, using 53c80\n");
-                MACHW_SET(MAC_SCSI_80);
-                break;
-        }
-
         iop_init();
         via_init();
         oss_init();
diff --git a/arch/m68knommu/kernel/asm-offsets.c b/arch/m68knommu/kernel/asm-offsets.c
index fd0c685a7f11..c785d07c02cc 100644
--- a/arch/m68knommu/kernel/asm-offsets.c
+++ b/arch/m68knommu/kernel/asm-offsets.c
@@ -87,6 +87,7 @@ int main(void)
         DEFINE(TI_TASK, offsetof(struct thread_info, task));
         DEFINE(TI_EXECDOMAIN, offsetof(struct thread_info, exec_domain));
         DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
+        DEFINE(TI_PREEMPTCOUNT, offsetof(struct thread_info, preempt_count));
         DEFINE(TI_CPU, offsetof(struct thread_info, cpu));
 
         return 0;
diff --git a/arch/m68knommu/kernel/entry.S b/arch/m68knommu/kernel/entry.S
index 1e7ea6a3e1a1..f4782d2dce8f 100644
--- a/arch/m68knommu/kernel/entry.S
+++ b/arch/m68knommu/kernel/entry.S
@@ -32,6 +32,7 @@
 #include <asm/segment.h>
 #include <asm/asm-offsets.h>
 #include <asm/entry.h>
+#include <asm/unistd.h>
 
 .text
 
@@ -140,3 +141,11 @@ ENTRY(sys_rt_sigreturn)
         RESTORE_SWITCH_STACK
         rts
 
+ENTRY(ret_from_user_signal)
+        moveq #__NR_sigreturn,%d0
+        trap #0
+
+ENTRY(ret_from_user_rt_signal)
+        move #__NR_rt_sigreturn,%d0
+        trap #0
+
diff --git a/arch/m68knommu/kernel/setup.c b/arch/m68knommu/kernel/setup.c
index d6f0200316fe..03f4fe6a2fc0 100644
--- a/arch/m68knommu/kernel/setup.c
+++ b/arch/m68knommu/kernel/setup.c
@@ -162,7 +162,7 @@ void __init setup_arch(char **cmdline_p)
         printk(KERN_INFO "DragonEngine II board support by Georges Menie\n");
 #endif
 #ifdef CONFIG_M5235EVB
-        printk(KERN_INFO "Motorola M5235EVB support (C)2005 Syn-tech Systems, Inc. (Jate Sujjavanich)");
+        printk(KERN_INFO "Motorola M5235EVB support (C)2005 Syn-tech Systems, Inc. (Jate Sujjavanich)\n");
 #endif
 
 #ifdef DEBUG
diff --git a/arch/m68knommu/kernel/signal.c b/arch/m68knommu/kernel/signal.c
index 70371378db86..bbfcae9e52b4 100644
--- a/arch/m68knommu/kernel/signal.c
+++ b/arch/m68knommu/kernel/signal.c
@@ -51,6 +51,8 @@
 
 #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
 
+void ret_from_user_signal(void);
+void ret_from_user_rt_signal(void);
 asmlinkage int do_signal(sigset_t *oldset, struct pt_regs *regs);
 
 /*
@@ -539,10 +541,6 @@ static inline int rt_setup_ucontext(struct ucontext *uc, struct pt_regs *regs)
         return err;
 }
 
-static inline void push_cache (unsigned long vaddr)
-{
-}
-
 static inline void *
 get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size)
 {
@@ -586,16 +584,11 @@ static void setup_frame (int sig, struct k_sigaction *ka,
         err |= copy_to_user (&frame->sc, &context, sizeof(context));
 
         /* Set up to return from userspace.  */
-        err |= __put_user(frame->retcode, &frame->pretcode);
-        /* moveq #,d0; trap #0 */
-        err |= __put_user(0x70004e40 + (__NR_sigreturn << 16),
-                          (long *)(frame->retcode));
+        err |= __put_user((void *) ret_from_user_signal, &frame->pretcode);
 
         if (err)
                 goto give_sigsegv;
 
-        push_cache ((unsigned long) &frame->retcode);
-
         /* Set up registers for signal handler */
         wrusp ((unsigned long) frame);
         regs->pc = (unsigned long) ka->sa.sa_handler;
@@ -655,17 +648,11 @@ static void setup_rt_frame (int sig, struct k_sigaction *ka, siginfo_t *info,
         err |= copy_to_user (&frame->uc.uc_sigmask, set, sizeof(*set));
 
         /* Set up to return from userspace.  */
-        err |= __put_user(frame->retcode, &frame->pretcode);
-        /* moveq #,d0; notb d0; trap #0 */
-        err |= __put_user(0x70004600 + ((__NR_rt_sigreturn ^ 0xff) << 16),
-                          (long *)(frame->retcode + 0));
-        err |= __put_user(0x4e40, (short *)(frame->retcode + 4));
+        err |= __put_user((void *) ret_from_user_rt_signal, &frame->pretcode);
 
         if (err)
                 goto give_sigsegv;
 
-        push_cache ((unsigned long) &frame->retcode);
-
         /* Set up registers for signal handler */
         wrusp ((unsigned long) frame);
         regs->pc = (unsigned long) ka->sa.sa_handler;
diff --git a/arch/m68knommu/kernel/sys_m68k.c b/arch/m68knommu/kernel/sys_m68k.c
index 65f7a95f056e..700281638629 100644
--- a/arch/m68knommu/kernel/sys_m68k.c
+++ b/arch/m68knommu/kernel/sys_m68k.c
@@ -28,23 +28,6 @@
 #include <asm/cacheflush.h>
 #include <asm/unistd.h>
 
-/*
- * sys_pipe() is the normal C calling standard for creating
- * a pipe. It's not the way unix traditionally does this, though.
- */
-asmlinkage int sys_pipe(unsigned long * fildes)
-{
-        int fd[2];
-        int error;
-
-        error = do_pipe(fd);
-        if (!error) {
-                if (copy_to_user(fildes, fd, 2*sizeof(int)))
-                        error = -EFAULT;
-        }
-        return error;
-}
-
 /* common code for old and new mmaps */
 static inline long do_mmap2(
         unsigned long addr, unsigned long len,
diff --git a/arch/m68knommu/kernel/traps.c b/arch/m68knommu/kernel/traps.c
index 437a061d8b94..ec9aea652e79 100644
--- a/arch/m68knommu/kernel/traps.c
+++ b/arch/m68knommu/kernel/traps.c
@@ -28,6 +28,7 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 #include <linux/ptrace.h>
+#include <linux/kallsyms.h>
 
 #include <asm/setup.h>
 #include <asm/fpu.h>
@@ -102,56 +103,47 @@ asmlinkage void buserr_c(struct frame *fp)
         force_sig(SIGSEGV, current);
 }
 
-
 int kstack_depth_to_print = 48;
 
-void show_stack(struct task_struct *task, unsigned long *stack)
+static void __show_stack(struct task_struct *task, unsigned long *stack)
 {
         unsigned long *endstack, addr;
-        extern char _start, _etext;
+        unsigned long *last_stack;
         int i;
 
-        if (!stack) {
-                if (task)
-                        stack = (unsigned long *)task->thread.ksp;
-                else
-                        stack = (unsigned long *)&stack;
-        }
+        if (!stack)
+                stack = (unsigned long *)task->thread.ksp;
 
         addr = (unsigned long) stack;
         endstack = (unsigned long *) PAGE_ALIGN(addr);
 
         printk(KERN_EMERG "Stack from %08lx:", (unsigned long)stack);
         for (i = 0; i < kstack_depth_to_print; i++) {
-                if (stack + 1 > endstack)
+                if (stack + 1 + i > endstack)
                         break;
                 if (i % 8 == 0)
                         printk("\n" KERN_EMERG "       ");
-                printk(" %08lx", *stack++);
+                printk(" %08lx", *(stack + i));
         }
         printk("\n");
 
-        printk(KERN_EMERG "Call Trace:");
-        i = 0;
-        while (stack + 1 <= endstack) {
-                addr = *stack++;
-                /*
-                 * If the address is either in the text segment of the
-                 * kernel, or in the region which contains vmalloc'ed
-                 * memory, it *may* be the address of a calling
-                 * routine; if so, print it so that someone tracing
-                 * down the cause of the crash will be able to figure
-                 * out the call path that was taken.
-                 */
-                if (((addr >= (unsigned long) &_start) &&
-                     (addr <= (unsigned long) &_etext))) {
-                        if (i % 4 == 0)
-                                printk("\n" KERN_EMERG "       ");
-                        printk(" [<%08lx>]", addr);
-                        i++;
-                }
+#ifdef CONFIG_FRAME_POINTER
+        printk(KERN_EMERG "Call Trace:\n");
+
+        last_stack = stack - 1;
+        while (stack <= endstack && stack > last_stack) {
+
+                addr = *(stack + 1);
+                printk(KERN_EMERG " [%08lx] ", addr);
+                print_symbol(KERN_CONT "%s\n", addr);
+
+                last_stack = stack;
+                stack = (unsigned long *)*stack;
         }
         printk("\n");
+#else
+        printk(KERN_EMERG "CONFIG_FRAME_POINTER disabled, no symbolic call trace\n");
+#endif
 }
 
 void bad_super_trap(struct frame *fp)
@@ -298,19 +290,47 @@ asmlinkage void set_esp0(unsigned long ssp)
         current->thread.esp0 = ssp;
 }
 
-
 /*
  * The architecture-independent backtrace generator
  */
 void dump_stack(void)
 {
-        unsigned long stack;
+        /*
+         * We need frame pointers for this little trick, which works as follows:
+         *
+         * +------------+ 0x00
+         * | Next SP    |       -> 0x0c
+         * +------------+ 0x04
+         * | Caller     |
+         * +------------+ 0x08
+         * | Local vars |       -> our stack var
+         * +------------+ 0x0c
+         * | Next SP    |       -> 0x18, that is what we pass to show_stack()
+         * +------------+ 0x10
+         * | Caller     |
+         * +------------+ 0x14
+         * | Local vars |
+         * +------------+ 0x18
+         * | ...        |
+         * +------------+
+         */
 
-        show_stack(current, &stack);
-}
+        unsigned long *stack;
 
+        stack = (unsigned long *)&stack;
+        stack++;
+        __show_stack(current, stack);
+}
 EXPORT_SYMBOL(dump_stack);
 
+void show_stack(struct task_struct *task, unsigned long *stack)
+{
+        if (!stack && !task)
+                dump_stack();
+        else
+                __show_stack(task, stack);
+}
+
 #ifdef CONFIG_M68KFPU_EMU
 asmlinkage void fpemu_signal(int signal, int code, void *addr)
 {
diff --git a/arch/m68knommu/kernel/vmlinux.lds.S b/arch/m68knommu/kernel/vmlinux.lds.S
index b44edb08e212..5592e0bf951f 100644
--- a/arch/m68knommu/kernel/vmlinux.lds.S
+++ b/arch/m68knommu/kernel/vmlinux.lds.S
@@ -64,6 +64,7 @@ SECTIONS {
                 _stext = . ;
                 TEXT_TEXT
                 SCHED_TEXT
+                LOCK_TEXT
                 *(.text.lock)
 
                 . = ALIGN(16);          /* Exception table              */
@@ -73,6 +74,7 @@ SECTIONS {
 
                 *(.rodata) *(.rodata.*)
                 *(__vermagic)           /* Kernel version magic */
+                *(__markers_strings)
                 *(.rodata1)
                 *(.rodata.str1.1)
 
@@ -182,6 +184,7 @@ SECTIONS {
                 *(COMMON)
                 . = ALIGN(4) ;
                 _ebss = . ;
+                _end = . ;
         } > BSS
 
 }
diff --git a/arch/m68knommu/platform/5206e/config.c b/arch/m68knommu/platform/5206e/config.c
index a6692e958f6b..d01a5d2b7557 100644
--- a/arch/m68knommu/platform/5206e/config.c
+++ b/arch/m68knommu/platform/5206e/config.c
@@ -48,7 +48,7 @@ static struct platform_device *m5206e_devices[] __initdata = {
 
 /***************************************************************************/
 
-static void __init m5206_uart_init_line(int line, int irq)
+static void __init m5206e_uart_init_line(int line, int irq)
 {
         if (line == 0) {
                 writel(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR);
diff --git a/arch/m68knommu/platform/5272/config.c b/arch/m68knommu/platform/5272/config.c
index 2aca599a1ca7..230bae691a7f 100644
--- a/arch/m68knommu/platform/5272/config.c
+++ b/arch/m68knommu/platform/5272/config.c
@@ -139,10 +139,6 @@ void __init config_BSP(char *commandp, int size)
         /* Copy command line from FLASH to local buffer... */
         memcpy(commandp, (char *) 0xf0004000, size);
         commandp[size-1] = 0;
-#elif defined(CONFIG_MTD_KeyTechnology)
-        /* Copy command line from FLASH to local buffer... */
-        memcpy(commandp, (char *) 0xffe06000, size);
-        commandp[size-1] = 0;
 #elif defined(CONFIG_CANCam)
         /* Copy command line from FLASH to local buffer... */
         memcpy(commandp, (char *) 0xf0010000, size);
diff --git a/arch/m68knommu/platform/528x/config.c b/arch/m68knommu/platform/528x/config.c
index 036e1b73d944..dfdb5c2ed8e6 100644
--- a/arch/m68knommu/platform/528x/config.c
+++ b/arch/m68knommu/platform/528x/config.c
@@ -26,9 +26,240 @@
 #include <asm/mcfuart.h>
 #include <asm/mcfqspi.h>
 
+#ifdef CONFIG_MTD_PARTITIONS
+#include <linux/mtd/partitions.h>
+#endif
+
 /***************************************************************************/
 
 void coldfire_reset(void);
+static void coldfire_qspi_cs_control(u8 cs, u8 command);
+
+/***************************************************************************/
+
+#if defined(CONFIG_SPI)
+
+#if defined(CONFIG_WILDFIRE)
+#define SPI_NUM_CHIPSELECTS     0x02
+#define SPI_PAR_VAL             0x07  /* Enable DIN, DOUT, CLK */
+#define SPI_CS_MASK             0x18
+
+#define FLASH_BLOCKSIZE         (1024*64)
+#define FLASH_NUMBLOCKS         16
+#define FLASH_TYPE              "m25p80"
+
+#define M25P80_CS               0
+#define MMC_CS                  1
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition stm25p_partitions[] = {
+        /* sflash */
+        [0] = {
+                .name = "stm25p80",
+                .offset = 0x00000000,
+                .size = FLASH_BLOCKSIZE * FLASH_NUMBLOCKS,
+                .mask_flags = 0
+        }
+};
+
+#endif
+
+#elif defined(CONFIG_WILDFIREMOD)
+
+#define SPI_NUM_CHIPSELECTS     0x08
+#define SPI_PAR_VAL             0x07  /* Enable DIN, DOUT, CLK */
+#define SPI_CS_MASK             0x78
+
+#define FLASH_BLOCKSIZE         (1024*64)
+#define FLASH_NUMBLOCKS         64
+#define FLASH_TYPE              "m25p32"
+/* Reserve 1M for the kernel parition */
+#define FLASH_KERNEL_SIZE   (1024 * 1024)
+
+#define M25P80_CS               5
+#define MMC_CS                  6
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition stm25p_partitions[] = {
+        /* sflash */
+        [0] = {
+                .name = "kernel",
+                .offset = FLASH_BLOCKSIZE * FLASH_NUMBLOCKS - FLASH_KERNEL_SIZE,
+                .size = FLASH_KERNEL_SIZE,
+                .mask_flags = 0
+        },
+        [1] = {
+                .name = "image",
+                .offset = 0x00000000,
+                .size = FLASH_BLOCKSIZE * FLASH_NUMBLOCKS - FLASH_KERNEL_SIZE,
+                .mask_flags = 0
+        },
+        [2] = {
+                .name = "all",
+                .offset = 0x00000000,
+                .size = FLASH_BLOCKSIZE * FLASH_NUMBLOCKS,
+                .mask_flags = 0
+        }
+};
+#endif
+
+#else
+#define SPI_NUM_CHIPSELECTS     0x04
+#define SPI_PAR_VAL             0x7F  /* Enable DIN, DOUT, CLK, CS0 - CS4 */
+#endif
+
+#ifdef MMC_CS
+static struct coldfire_spi_chip flash_chip_info = {
+        .mode = SPI_MODE_0,
+        .bits_per_word = 16,
+        .del_cs_to_clk = 17,
+        .del_after_trans = 1,
+        .void_write_data = 0
+};
+
+static struct coldfire_spi_chip mmc_chip_info = {
+        .mode = SPI_MODE_0,
+        .bits_per_word = 16,
+        .del_cs_to_clk = 17,
+        .del_after_trans = 1,
+        .void_write_data = 0xFFFF
+};
+#endif
+
+#ifdef M25P80_CS
+static struct flash_platform_data stm25p80_platform_data = {
+        .name = "ST M25P80 SPI Flash chip",
+#ifdef CONFIG_MTD_PARTITIONS
+        .parts = stm25p_partitions,
+        .nr_parts = sizeof(stm25p_partitions) / sizeof(*stm25p_partitions),
+#endif
+        .type = FLASH_TYPE
+};
+#endif
+
+static struct spi_board_info spi_board_info[] __initdata = {
+#ifdef M25P80_CS
+        {
+                .modalias = "m25p80",
+                .max_speed_hz = 16000000,
+                .bus_num = 1,
+                .chip_select = M25P80_CS,
+                .platform_data = &stm25p80_platform_data,
+                .controller_data = &flash_chip_info
+        },
+#endif
+#ifdef MMC_CS
+        {
+                .modalias = "mmc_spi",
+                .max_speed_hz = 16000000,
+                .bus_num = 1,
+                .chip_select = MMC_CS,
+                .controller_data = &mmc_chip_info
+        }
+#endif
+};
+
+static struct coldfire_spi_master coldfire_master_info = {
+        .bus_num = 1,
+        .num_chipselect = SPI_NUM_CHIPSELECTS,
+        .irq_source = MCF5282_QSPI_IRQ_SOURCE,
+        .irq_vector = MCF5282_QSPI_IRQ_VECTOR,
+        .irq_mask = ((0x01 << MCF5282_QSPI_IRQ_SOURCE) | 0x01),
+        .irq_lp = 0x2B,  /* Level 5 and Priority 3 */
+        .par_val = SPI_PAR_VAL,
+        .cs_control = coldfire_qspi_cs_control,
+};
+
+static struct resource coldfire_spi_resources[] = {
+        [0] = {
+                .name = "qspi-par",
+                .start = MCF5282_QSPI_PAR,
+                .end = MCF5282_QSPI_PAR,
+                .flags = IORESOURCE_MEM
+        },
+
+        [1] = {
+                .name = "qspi-module",
+                .start = MCF5282_QSPI_QMR,
+                .end = MCF5282_QSPI_QMR + 0x18,
+                .flags = IORESOURCE_MEM
+        },
+
+        [2] = {
+                .name = "qspi-int-level",
+                .start = MCF5282_INTC0 + MCFINTC_ICR0 + MCF5282_QSPI_IRQ_SOURCE,
+                .end = MCF5282_INTC0 + MCFINTC_ICR0 + MCF5282_QSPI_IRQ_SOURCE,
+                .flags = IORESOURCE_MEM
+        },
+
+        [3] = {
+                .name = "qspi-int-mask",
+                .start = MCF5282_INTC0 + MCFINTC_IMRL,
+                .end = MCF5282_INTC0 + MCFINTC_IMRL,
+                .flags = IORESOURCE_MEM
+        }
+};
+
+static struct platform_device coldfire_spi = {
+        .name = "spi_coldfire",
+        .id = -1,
+        .resource = coldfire_spi_resources,
+        .num_resources = ARRAY_SIZE(coldfire_spi_resources),
+        .dev = {
+                .platform_data = &coldfire_master_info,
+        }
+};
+
+static void coldfire_qspi_cs_control(u8 cs, u8 command)
+{
+        u8 cs_bit = ((0x01 << cs) << 3) & SPI_CS_MASK;
+
+#if defined(CONFIG_WILDFIRE)
+        u8 cs_mask = ~(((0x01 << cs) << 3) & SPI_CS_MASK);
+#endif
+#if defined(CONFIG_WILDFIREMOD)
+        u8 cs_mask = (cs << 3) & SPI_CS_MASK;
+#endif
+
+        /*
+         * Don't do anything if the chip select is not
+         * one of the port qs pins.
+         */
+        if (command & QSPI_CS_INIT) {
+#if defined(CONFIG_WILDFIRE)
+                MCF5282_GPIO_DDRQS  |= cs_bit;
+                MCF5282_GPIO_PQSPAR &= ~cs_bit;
+#endif
+
+#if defined(CONFIG_WILDFIREMOD)
+                MCF5282_GPIO_DDRQS  |= SPI_CS_MASK;
+                MCF5282_GPIO_PQSPAR &= ~SPI_CS_MASK;
+#endif
+        }
+
+        if (command & QSPI_CS_ASSERT) {
+                MCF5282_GPIO_PORTQS &= ~SPI_CS_MASK;
+                MCF5282_GPIO_PORTQS |= cs_mask;
+        } else if (command & QSPI_CS_DROP) {
+                MCF5282_GPIO_PORTQS |= SPI_CS_MASK;
+        }
+}
+
+static int __init spi_dev_init(void)
+{
+        int retval;
+
+        retval = platform_device_register(&coldfire_spi);
+        if (retval < 0)
+                return retval;
+
+        if (ARRAY_SIZE(spi_board_info))
+                retval = spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
+
+        return retval;
+}
+
+#endif /* CONFIG_SPI */
 
 /***************************************************************************/
 
@@ -111,10 +342,43 @@ void mcf_autovector(unsigned int vec)
 
 /***************************************************************************/
 
+#ifdef CONFIG_WILDFIRE
+void wildfire_halt(void)
+{
+        writeb(0, 0x30000007);
+        writeb(0x2, 0x30000007);
+}
+#endif
+
+#ifdef CONFIG_WILDFIREMOD
+void wildfiremod_halt(void)
+{
+        printk(KERN_INFO "WildFireMod hibernating...\n");
+
+        /* Set portE.5 to Digital IO */
+        MCF5282_GPIO_PEPAR &= ~(1 << (5 * 2));
+
+        /* Make portE.5 an output */
+        MCF5282_GPIO_DDRE |= (1 << 5);
+
+        /* Now toggle portE.5 from low to high */
+        MCF5282_GPIO_PORTE &= ~(1 << 5);
+        MCF5282_GPIO_PORTE |= (1 << 5);
+
+        printk(KERN_EMERG "Failed to hibernate. Halting!\n");
+}
+#endif
+
 void __init config_BSP(char *commandp, int size)
 {
         mcf_disableall();
-        mach_reset = coldfire_reset;
+
+#ifdef CONFIG_WILDFIRE
+        mach_halt = wildfire_halt;
+#endif
+#ifdef CONFIG_WILDFIREMOD
+        mach_halt = wildfiremod_halt;
+#endif
 }
 
 /***************************************************************************/
diff --git a/arch/m68knommu/platform/5307/config.c b/arch/m68knommu/platform/5307/config.c
index 92dc862fa826..11cff6625dcc 100644
--- a/arch/m68knommu/platform/5307/config.c
+++ b/arch/m68knommu/platform/5307/config.c
@@ -124,8 +124,7 @@ void __init config_BSP(char *commandp, int size)
         mcf_setimr(MCFSIM_IMR_MASKALL);
 
 #if defined(CONFIG_NETtel) || defined(CONFIG_eLIA) || \
-      defined(CONFIG_DISKtel) || defined(CONFIG_SECUREEDGEMP3) || \
-      defined(CONFIG_CLEOPATRA)
+    defined(CONFIG_SECUREEDGEMP3) || defined(CONFIG_CLEOPATRA)
         /* Copy command line from FLASH to local buffer... */
         memcpy(commandp, (char *) 0xf0004000, size);
         commandp[size-1] = 0;
diff --git a/arch/m68knommu/platform/coldfire/entry.S b/arch/m68knommu/platform/coldfire/entry.S
index 111b66dc737b..1e3c0dcbd7ac 100644
--- a/arch/m68knommu/platform/coldfire/entry.S
+++ b/arch/m68knommu/platform/coldfire/entry.S
@@ -103,9 +103,26 @@ ret_from_signal:
         addql   #4,%sp
 
 ret_from_exception:
+        move    #0x2700,%sr             /* disable intrs */
         btst    #5,%sp@(PT_SR)          /* check if returning to kernel */
         jeq     Luser_return            /* if so, skip resched, signals */
 
+#ifdef CONFIG_PREEMPT
+        movel   %sp,%d1                 /* get thread_info pointer */
+        andl    #-THREAD_SIZE,%d1       /* at base of kernel stack */
+        movel   %d1,%a0
+        movel   %a0@(TI_FLAGS),%d1      /* get thread_info->flags */
+        andl    #_TIF_NEED_RESCHED,%d1
+        jeq     Lkernel_return
+
+        movel   %a0@(TI_PREEMPTCOUNT),%d1
+        cmpl    #0,%d1
+        jne     Lkernel_return
+
+        pea     Lkernel_return
+        jmp     preempt_schedule_irq    /* preempt the kernel */
+#endif
+
 Lkernel_return:
         moveml  %sp@,%d1-%d5/%a0-%a2
         lea     %sp@(32),%sp            /* space for 8 regs */
@@ -140,6 +157,7 @@ Lreturn:
 
 Lwork_to_do:
         movel   %a0@(TI_FLAGS),%d1      /* get thread_info->flags */
+        move    #0x2000,%sr             /* enable intrs again */
         btst    #TIF_NEED_RESCHED,%d1
         jne     reschedule
 
diff --git a/arch/mips/kernel/binfmt_elfn32.c b/arch/mips/kernel/binfmt_elfn32.c
index 77db3473deab..9fdd8bcdd21e 100644
--- a/arch/mips/kernel/binfmt_elfn32.c
+++ b/arch/mips/kernel/binfmt_elfn32.c
@@ -54,6 +54,7 @@ typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
 #include <linux/module.h>
 #include <linux/elfcore.h>
 #include <linux/compat.h>
+#include <linux/math64.h>
 
 #define elf_prstatus elf_prstatus32
 struct elf_prstatus32
@@ -102,8 +103,8 @@ jiffies_to_compat_timeval(unsigned long jiffies, struct compat_timeval *value)
          * one divide.
          */
         u64 nsec = (u64)jiffies * TICK_NSEC;
-        long rem;
-        value->tv_sec = div_long_long_rem(nsec, NSEC_PER_SEC, &rem);
+        u32 rem;
+        value->tv_sec = div_u64_rem(nsec, NSEC_PER_SEC, &rem);
         value->tv_usec = rem / NSEC_PER_USEC;
 }
 
diff --git a/arch/mips/kernel/binfmt_elfo32.c b/arch/mips/kernel/binfmt_elfo32.c
index 08f4cd781ee3..e1333d7319e2 100644
--- a/arch/mips/kernel/binfmt_elfo32.c
+++ b/arch/mips/kernel/binfmt_elfo32.c
@@ -56,6 +56,7 @@ typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
 #include <linux/module.h>
 #include <linux/elfcore.h>
 #include <linux/compat.h>
+#include <linux/math64.h>
 
 #define elf_prstatus elf_prstatus32
 struct elf_prstatus32
@@ -104,8 +105,8 @@ jiffies_to_compat_timeval(unsigned long jiffies, struct compat_timeval *value)
          * one divide.
          */
         u64 nsec = (u64)jiffies * TICK_NSEC;
-        long rem;
-        value->tv_sec = div_long_long_rem(nsec, NSEC_PER_SEC, &rem);
+        u32 rem;
+        value->tv_sec = div_u64_rem(nsec, NSEC_PER_SEC, &rem);
         value->tv_usec = rem / NSEC_PER_USEC;
 }
 
diff --git a/arch/mips/kernel/irixioctl.c b/arch/mips/kernel/irixioctl.c
index 2bde200d5ad0..b39bdba82e02 100644
--- a/arch/mips/kernel/irixioctl.c
+++ b/arch/mips/kernel/irixioctl.c
@@ -27,33 +27,6 @@ struct irix_termios {
         cc_t c_cc[NCCS];
 };
 
-extern void start_tty(struct tty_struct *tty);
-static struct tty_struct *get_tty(int fd)
-{
-        struct file *filp;
-        struct tty_struct *ttyp = NULL;
-
-        rcu_read_lock();
-        filp = fcheck(fd);
-        if(filp && filp->private_data) {
-                ttyp = (struct tty_struct *) filp->private_data;
-
-                if(ttyp->magic != TTY_MAGIC)
-                        ttyp =NULL;
-        }
-        rcu_read_unlock();
-        return ttyp;
-}
-
-static struct tty_struct *get_real_tty(struct tty_struct *tp)
-{
-        if (tp->driver->type == TTY_DRIVER_TYPE_PTY &&
-           tp->driver->subtype == PTY_TYPE_MASTER)
-                return tp->link;
-        else
-                return tp;
-}
-
 asmlinkage int irix_ioctl(int fd, unsigned long cmd, unsigned long arg)
 {
         struct tty_struct *tp, *rtp;
@@ -146,34 +119,24 @@ asmlinkage int irix_ioctl(int fd, unsigned long cmd, unsigned long arg)
                 error = sys_ioctl(fd, TIOCNOTTY, arg);
                 break;
 
-        case 0x00007416:
+        case 0x00007416: {
+                pid_t pid;
 #ifdef DEBUG_IOCTLS
                 printk("TIOCGSID, %08lx) ", arg);
 #endif
-                tp = get_tty(fd);
-                if(!tp) {
-                        error = -EINVAL;
-                        break;
-                }
-                rtp = get_real_tty(tp);
-#ifdef DEBUG_IOCTLS
-                printk("rtp->session=%d ", rtp->session);
-#endif
-                error = put_user(rtp->session, (unsigned long __user *) arg);
+                old_fs = get_fs(); set_fs(get_ds());
+                error = sys_ioctl(fd, TIOCGSID, (unsigned long)&pid);
+                set_fs(old_fs);
+                if (!error)
+                        error = put_user(pid, (unsigned long __user *) arg);
                 break;
-
+        }
         case 0x746e:
                 /* TIOCSTART, same effect as hitting ^Q */
 #ifdef DEBUG_IOCTLS
                 printk("TIOCSTART, %08lx) ", arg);
 #endif
-                tp = get_tty(fd);
-                if(!tp) {
-                        error = -EINVAL;
-                        break;
-                }
-                rtp = get_real_tty(tp);
-                start_tty(rtp);
+                error = sys_ioctl(fd, TCXONC, TCOON);
                 break;
 
         case 0x20006968:
diff --git a/arch/mips/kernel/kspd.c b/arch/mips/kernel/kspd.c
index 998c4efcce88..ceb62dce1c9c 100644
--- a/arch/mips/kernel/kspd.c
+++ b/arch/mips/kernel/kspd.c
@@ -20,6 +20,7 @@
 #include <linux/sched.h>
 #include <linux/unistd.h>
 #include <linux/file.h>
+#include <linux/fdtable.h>
 #include <linux/fs.h>
 #include <linux/syscalls.h>
 #include <linux/workqueue.h>
diff --git a/arch/mn10300/kernel/sys_mn10300.c b/arch/mn10300/kernel/sys_mn10300.c
index 5f17a1ebc825..bca5a84dc72c 100644
--- a/arch/mn10300/kernel/sys_mn10300.c
+++ b/arch/mn10300/kernel/sys_mn10300.c
@@ -29,23 +29,6 @@
 #define MIN_MAP_ADDR    PAGE_SIZE       /* minimum fixed mmap address */
 
 /*
- * sys_pipe() is the normal C calling standard for creating
- * a pipe. It's not the way Unix traditionally does this, though.
- */
-asmlinkage long sys_pipe(unsigned long __user *fildes)
-{
-        int fd[2];
-        int error;
-
-        error = do_pipe(fd);
-        if (!error) {
-                if (copy_to_user(fildes, fd, 2 * sizeof(int)))
-                        error = -EFAULT;
-        }
-        return error;
-}
-
-/*
  * memory mapping syscall
  */
 asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
diff --git a/arch/parisc/kernel/sys_parisc.c b/arch/parisc/kernel/sys_parisc.c
index 4f589216b39e..71b31957c8f1 100644
--- a/arch/parisc/kernel/sys_parisc.c
+++ b/arch/parisc/kernel/sys_parisc.c
@@ -33,19 +33,6 @@
 #include <linux/utsname.h>
 #include <linux/personality.h>
 
-int sys_pipe(int __user *fildes)
-{
-        int fd[2];
-        int error;
-
-        error = do_pipe(fd);
-        if (!error) {
-                if (copy_to_user(fildes, fd, 2*sizeof(int)))
-                        error = -EFAULT;
-        }
-        return error;
-}
-
 static unsigned long get_unshared_area(unsigned long addr, unsigned long len)
 {
         struct vm_area_struct *vma;
diff --git a/arch/powerpc/boot/dts/mpc8610_hpcd.dts b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
index 1f2f1e0a5571..bba234eb14a9 100644
--- a/arch/powerpc/boot/dts/mpc8610_hpcd.dts
+++ b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
@@ -21,6 +21,7 @@
                 serial1 = &serial1;
                 pci0 = &pci0;
                 pci1 = &pci1;
+                pci2 = &pci2;
         };
 
         cpus {
@@ -105,7 +106,7 @@
                         compatible = "ns16550";
                         reg = <0x4600 0x100>;
                         clock-frequency = <0>;
-                        interrupts = <28 2>;
+                        interrupts = <42 2>;
                         interrupt-parent = <&mpic>;
                 };
 
@@ -322,4 +323,24 @@
                         };
                 };
         };
+
+        pci2: pcie@e0009000 {
+                #address-cells = <3>;
+                #size-cells = <2>;
+                #interrupt-cells = <1>;
+                device_type = "pci";
+                compatible = "fsl,mpc8641-pcie";
+                reg = <0xe0009000 0x00001000>;
+                ranges = <0x02000000 0 0x90000000 0x90000000 0 0x10000000
+                          0x01000000 0 0x00000000 0xe2000000 0 0x00100000>;
+                bus-range = <0 255>;
+                interrupt-map-mask = <0xf800 0 0 7>;
+                interrupt-map = <0x0000 0 0 1 &mpic 4 1
+                                 0x0000 0 0 2 &mpic 5 1
+                                 0x0000 0 0 3 &mpic 6 1
+                                 0x0000 0 0 4 &mpic 7 1>;
+                interrupt-parent = <&mpic>;
+                interrupts = <25 2>;
+                clock-frequency = <33333333>;
+        };
 };
diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig
index 7a64c564f6e6..71d79e428d20 100644
--- a/arch/powerpc/configs/ps3_defconfig
+++ b/arch/powerpc/configs/ps3_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Thu Mar 20 11:07:04 2008
+# Linux kernel version: 2.6.25
+# Mon Apr 28 12:39:10 2008
 #
 CONFIG_PPC64=y
 
@@ -30,6 +30,9 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_HAVE_SETUP_PER_CPU_AREA=y
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_ARCH_HAS_ILOG2_U64=y
@@ -73,8 +76,6 @@ CONFIG_POSIX_MQUEUE=y
 CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
-# CONFIG_USER_SCHED is not set
-# CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -161,7 +162,6 @@ CONFIG_PPC_MULTIPLATFORM=y
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_MAPLE is not set
 # CONFIG_PPC_PASEMI is not set
-# CONFIG_PPC_CELLEB is not set
 CONFIG_PPC_PS3=y
 
 #
@@ -181,6 +181,7 @@ CONFIG_PS3_LPM=m
 CONFIG_PPC_CELL=y
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PPC_IBM_CELL_BLADE is not set
+# CONFIG_PPC_CELLEB is not set
 
 #
 # Cell Broadband Engine options
@@ -205,9 +206,9 @@ CONFIG_SPU_BASE=y
 #
 # Kernel options
 #
-# CONFIG_TICK_ONESHOT is not set
+CONFIG_TICK_ONESHOT=y
 # CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_HIGH_RES_TIMERS=y
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
@@ -221,7 +222,6 @@ CONFIG_PREEMPT_NONE=y
 CONFIG_BINFMT_ELF=y
 CONFIG_COMPAT_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
-CONFIG_FORCE_MAX_ZONEORDER=13
 # CONFIG_IOMMU_VMERGE is not set
 CONFIG_IOMMU_HELPER=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
@@ -255,6 +255,7 @@ CONFIG_BOUNCE=y
 CONFIG_ARCH_MEMORY_PROBE=y
 # CONFIG_PPC_HAS_HASH_64K is not set
 # CONFIG_PPC_64K_PAGES is not set
+CONFIG_FORCE_MAX_ZONEORDER=13
 # CONFIG_SCHED_SMT is not set
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -272,7 +273,9 @@ CONFIG_GENERIC_ISA_DMA=y
 # CONFIG_PCI_SYSCALL is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
+CONFIG_PAGE_OFFSET=0xc000000000000000
 CONFIG_KERNEL_START=0xc000000000000000
+CONFIG_PHYSICAL_START=0x00000000
 
 #
 # Networking
@@ -292,7 +295,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
+CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
@@ -301,6 +304,7 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_IP_PNP_RARP is not set
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
 # CONFIG_ARPD is not set
 # CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
@@ -332,8 +336,10 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=y
 CONFIG_INET6_XFRM_MODE_BEET=y
 # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_IPV6_TUNNEL is not set
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -392,8 +398,6 @@ CONFIG_IEEE80211=m
 CONFIG_IEEE80211_CRYPT_WEP=m
 CONFIG_IEEE80211_CRYPT_CCMP=m
 CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -507,6 +511,7 @@ CONFIG_WLAN_80211=y
 # CONFIG_LIBERTAS is not set
 # CONFIG_USB_ZD1201 is not set
 # CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_HOSTAP is not set
 
 #
@@ -578,6 +583,7 @@ CONFIG_INPUT_JOYSTICK=y
 # CONFIG_JOYSTICK_SPACEBALL is not set
 # CONFIG_JOYSTICK_STINGER is not set
 # CONFIG_JOYSTICK_TWIDJOY is not set
+# CONFIG_JOYSTICK_ZHENHUA is not set
 # CONFIG_JOYSTICK_JOYDUMP is not set
 # CONFIG_JOYSTICK_XPAD is not set
 # CONFIG_INPUT_TABLET is not set
@@ -641,6 +647,7 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
@@ -761,10 +768,6 @@ CONFIG_SND_PS3_DEFAULT_START_DELAY=2000
 # CONFIG_SND_SOC is not set
 
 #
-# SoC Audio support for SuperH
-#
-
-#
 # ALSA SoC audio for Freescale SOCs
 #
 
@@ -849,6 +852,7 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
@@ -893,10 +897,6 @@ CONFIG_USB_MON=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -986,7 +986,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
@@ -1059,9 +1058,10 @@ CONFIG_NLS_ISO8859_1=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
@@ -1071,6 +1071,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -1078,6 +1079,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=2048
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -1093,12 +1095,16 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
 CONFIG_DEBUG_LIST=y
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
@@ -1121,51 +1127,81 @@ CONFIG_IRQSTACKS=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_AEAD=m
 CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_SEQIV=m
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=m
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-CONFIG_CRYPTO_CTR=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_CCM=m
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 CONFIG_CRYPTO_SALSA20=m
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 CONFIG_CRYPTO_LZO=m
 CONFIG_CRYPTO_HW=y
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index be35ffae10f0..1457aa0a08f1 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -386,6 +386,8 @@ static void __init smp_create_idle(unsigned int cpu)
                 panic("failed fork for CPU %u: %li", cpu, PTR_ERR(p));
 #ifdef CONFIG_PPC64
         paca[cpu].__current = p;
+        paca[cpu].kstack = (unsigned long) task_thread_info(p)
+                + THREAD_SIZE - STACK_FRAME_OVERHEAD;
 #endif
         current_set[cpu] = task_thread_info(p);
         task_thread_info(p)->cpu = cpu;
diff --git a/arch/powerpc/kernel/syscalls.c b/arch/powerpc/kernel/syscalls.c
index e722a4eeb5d0..4fe69ca24481 100644
--- a/arch/powerpc/kernel/syscalls.c
+++ b/arch/powerpc/kernel/syscalls.c
@@ -136,23 +136,6 @@ int sys_ipc(uint call, int first, unsigned long second, long third,
         return ret;
 }
 
-/*
- * sys_pipe() is the normal C calling standard for creating
- * a pipe. It's not the way unix traditionally does this, though.
- */
-int sys_pipe(int __user *fildes)
-{
-        int fd[2];
-        int error;
-
-        error = do_pipe(fd);
-        if (!error) {
-                if (copy_to_user(fildes, fd, 2*sizeof(int)))
-                        error = -EFAULT;
-        }
-        return error;
-}
-
 static inline unsigned long do_mmap2(unsigned long addr, size_t len,
                         unsigned long prot, unsigned long flags,
                         unsigned long fd, unsigned long off, int shift)
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index 3b26fbd6bec9..73401e83739a 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -149,7 +149,7 @@ EXPORT_SYMBOL(tb_ticks_per_sec);	/* for cputime_t conversions */
 u64 tb_to_xs;
 unsigned tb_to_us;
 
-#define TICKLEN_SCALE   TICK_LENGTH_SHIFT
+#define TICKLEN_SCALE   NTP_SCALE_SHIFT
 u64 last_tick_len;      /* units are ns / 2^TICKLEN_SCALE */
 u64 ticklen_to_xs;      /* 0.64 fraction */
 
@@ -1007,8 +1007,6 @@ void __init time_init(void)
         vdso_data->stamp_xsec = (u64) xtime.tv_sec * XSEC_PER_SEC;
         vdso_data->tb_to_xs = tb_to_xs;
 
-        time_freq = 0;
-
         write_sequnlock_irqrestore(&xtime_lock, flags);
 
         /* Register the clocksource, if we're not running on iSeries */
diff --git a/arch/powerpc/kvm/booke_guest.c b/arch/powerpc/kvm/booke_guest.c
index 6d9884a6884a..712d89a28c46 100644
--- a/arch/powerpc/kvm/booke_guest.c
+++ b/arch/powerpc/kvm/booke_guest.c
@@ -49,6 +49,7 @@ struct kvm_stats_debugfs_item debugfs_entries[] = {
         { "inst_emu",   VCPU_STAT(emulated_inst_exits) },
         { "dec",        VCPU_STAT(dec_exits) },
         { "ext_intr",   VCPU_STAT(ext_intr_exits) },
+        { "halt_wakeup", VCPU_STAT(halt_wakeup) },
         { NULL }
 };
 
@@ -338,6 +339,11 @@ int kvmppc_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu,
                 }
                 break;
 
+        case BOOKE_INTERRUPT_FP_UNAVAIL:
+                kvmppc_queue_exception(vcpu, exit_nr);
+                r = RESUME_GUEST;
+                break;
+
         case BOOKE_INTERRUPT_DATA_STORAGE:
                 vcpu->arch.dear = vcpu->arch.fault_dear;
                 vcpu->arch.esr = vcpu->arch.fault_esr;
diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c
index bad40bd2d3ac..777e0f34e0ea 100644
--- a/arch/powerpc/kvm/powerpc.c
+++ b/arch/powerpc/kvm/powerpc.c
@@ -36,13 +36,12 @@ gfn_t unalias_gfn(struct kvm *kvm, gfn_t gfn)
 
 int kvm_cpu_has_interrupt(struct kvm_vcpu *v)
 {
-        /* XXX implement me */
-        return 0;
+        return !!(v->arch.pending_exceptions);
 }
 
 int kvm_arch_vcpu_runnable(struct kvm_vcpu *v)
 {
-        return 1;
+        return !(v->arch.msr & MSR_WE);
 }
 
 
@@ -214,6 +213,11 @@ static void kvmppc_decrementer_func(unsigned long data)
         struct kvm_vcpu *vcpu = (struct kvm_vcpu *)data;
 
         kvmppc_queue_exception(vcpu, BOOKE_INTERRUPT_DECREMENTER);
+
+        if (waitqueue_active(&vcpu->wq)) {
+                wake_up_interruptible(&vcpu->wq);
+                vcpu->stat.halt_wakeup++;
+        }
 }
 
 int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu)
@@ -339,6 +343,8 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run)
         int r;
         sigset_t sigsaved;
 
+        vcpu_load(vcpu);
+
         if (vcpu->sigset_active)
                 sigprocmask(SIG_SETMASK, &vcpu->sigset, &sigsaved);
 
@@ -363,12 +369,20 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run)
         if (vcpu->sigset_active)
                 sigprocmask(SIG_SETMASK, &sigsaved, NULL);
 
+        vcpu_put(vcpu);
+
         return r;
 }
 
 int kvm_vcpu_ioctl_interrupt(struct kvm_vcpu *vcpu, struct kvm_interrupt *irq)
 {
         kvmppc_queue_exception(vcpu, BOOKE_INTERRUPT_EXTERNAL);
+
+        if (waitqueue_active(&vcpu->wq)) {
+                wake_up_interruptible(&vcpu->wq);
+                vcpu->stat.halt_wakeup++;
+        }
+
         return 0;
 }
 
diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile
index 4bb023f4c869..f1d2cdc5331b 100644
--- a/arch/powerpc/lib/Makefile
+++ b/arch/powerpc/lib/Makefile
@@ -23,3 +23,4 @@ obj-$(CONFIG_SMP)	+= locks.o
 endif
 
 obj-$(CONFIG_PPC_LIB_RHEAP) += rheap.o
+obj-$(CONFIG_HAS_IOMEM) += devres.o
diff --git a/arch/powerpc/lib/devres.c b/arch/powerpc/lib/devres.c
new file mode 100644
index 000000000000..292115d98ea9
--- /dev/null
+++ b/arch/powerpc/lib/devres.c
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2008 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/device.h>       /* devres_*(), devm_ioremap_release() */
+#include <linux/io.h>           /* ioremap_flags() */
+#include <linux/module.h>       /* EXPORT_SYMBOL() */
+
+/**
+ * devm_ioremap_prot - Managed ioremap_flags()
+ * @dev: Generic device to remap IO address for
+ * @offset: BUS offset to map
+ * @size: Size of map
+ * @flags: Page flags
+ *
+ * Managed ioremap_prot().  Map is automatically unmapped on driver
+ * detach.
+ */
+void __iomem *devm_ioremap_prot(struct device *dev, resource_size_t offset,
+                                 size_t size, unsigned long flags)
+{
+        void __iomem **ptr, *addr;
+
+        ptr = devres_alloc(devm_ioremap_release, sizeof(*ptr), GFP_KERNEL);
+        if (!ptr)
+                return NULL;
+
+        addr = ioremap_flags(offset, size, flags);
+        if (addr) {
+                *ptr = addr;
+                devres_add(dev, ptr);
+        } else
+                devres_free(ptr);
+
+        return addr;
+}
+EXPORT_SYMBOL(devm_ioremap_prot);
diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c
index 906daeda59a8..cf8705e32d60 100644
--- a/arch/powerpc/mm/slb.c
+++ b/arch/powerpc/mm/slb.c
@@ -30,7 +30,7 @@
 #ifdef DEBUG
 #define DBG(fmt...) udbg_printf(fmt)
 #else
-#define DBG(fmt...)
+#define DBG pr_debug
 #endif
 
 extern void slb_allocate_realmode(unsigned long ea);
@@ -44,13 +44,13 @@ static void slb_allocate(unsigned long ea)
         slb_allocate_realmode(ea);
 }
 
+#define slb_esid_mask(ssize)    \
+        (((ssize) == MMU_SEGSIZE_256M)? ESID_MASK: ESID_MASK_1T)
+
 static inline unsigned long mk_esid_data(unsigned long ea, int ssize,
                                          unsigned long slot)
 {
-        unsigned long mask;
-
-        mask = (ssize == MMU_SEGSIZE_256M)? ESID_MASK: ESID_MASK_1T;
-        return (ea & mask) | SLB_ESID_V | slot;
+        return (ea & slb_esid_mask(ssize)) | SLB_ESID_V | slot;
 }
 
 #define slb_vsid_shift(ssize)   \
@@ -279,8 +279,8 @@ void slb_initialize(void)
                 patch_slb_encoding(slb_compare_rr_to_size,
                                    mmu_slb_size);
 
-                DBG("SLB: linear  LLP = %04x\n", linear_llp);
-                DBG("SLB: io      LLP = %04x\n", io_llp);
+                DBG("SLB: linear  LLP = %04lx\n", linear_llp);
+                DBG("SLB: io      LLP = %04lx\n", io_llp);
         }
 
         get_paca()->stab_rr = SLB_NUM_BOLTED;
@@ -301,11 +301,16 @@ void slb_initialize(void)
 
         create_shadowed_slbe(VMALLOC_START, mmu_kernel_ssize, vflags, 1);
 
+        /* For the boot cpu, we're running on the stack in init_thread_union,
+         * which is in the first segment of the linear mapping, and also
+         * get_paca()->kstack hasn't been initialized yet.
+         * For secondary cpus, we need to bolt the kernel stack entry now.
+         */
         slb_shadow_clear(2);
+        if (raw_smp_processor_id() != boot_cpuid &&
+            (get_paca()->kstack & slb_esid_mask(mmu_kernel_ssize)) > PAGE_OFFSET)
+                create_shadowed_slbe(get_paca()->kstack,
+                                     mmu_kernel_ssize, lflags, 2);
 
-        /* We don't bolt the stack for the time being - we're in boot,
-         * so the stack is in the bolted segment.  By the time it goes
-         * elsewhere, we'll call _switch() which will bolt in the new
-         * one. */
         asm volatile("isync":::"memory");
 }
diff --git a/arch/powerpc/platforms/cell/spufs/coredump.c b/arch/powerpc/platforms/cell/spufs/coredump.c
index b962c3ab470c..af116aadba10 100644
--- a/arch/powerpc/platforms/cell/spufs/coredump.c
+++ b/arch/powerpc/platforms/cell/spufs/coredump.c
@@ -22,6 +22,7 @@
 
 #include <linux/elf.h>
 #include <linux/file.h>
+#include <linux/fdtable.h>
 #include <linux/fs.h>
 #include <linux/list.h>
 #include <linux/module.h>
diff --git a/arch/powerpc/platforms/ps3/interrupt.c b/arch/powerpc/platforms/ps3/interrupt.c
index a14e5cdc2fed..e59634f7af96 100644
--- a/arch/powerpc/platforms/ps3/interrupt.c
+++ b/arch/powerpc/platforms/ps3/interrupt.c
@@ -167,8 +167,8 @@ static struct irq_chip ps3_irq_chip = {
  * ps3_private data.
  */
 
-int ps3_virq_setup(enum ps3_cpu_binding cpu, unsigned long outlet,
-        unsigned int *virq)
+static int ps3_virq_setup(enum ps3_cpu_binding cpu, unsigned long outlet,
+                          unsigned int *virq)
 {
         int result;
         struct ps3_private *pd;
@@ -217,7 +217,7 @@ fail_create:
  * Clears chip data and calls irq_dispose_mapping() for the virq.
  */
 
-int ps3_virq_destroy(unsigned int virq)
+static int ps3_virq_destroy(unsigned int virq)
 {
         const struct ps3_private *pd = get_irq_chip_data(virq);
 
diff --git a/arch/powerpc/platforms/pseries/scanlog.c b/arch/powerpc/platforms/pseries/scanlog.c
index bec3803f0618..417eca79df69 100644
--- a/arch/powerpc/platforms/pseries/scanlog.c
+++ b/arch/powerpc/platforms/pseries/scanlog.c
@@ -55,11 +55,6 @@ static ssize_t scanlog_read(struct file *file, char __user *buf,
         dp = PDE(inode);
         data = (unsigned int *)dp->data;
 
-        if (!data) {
-                printk(KERN_ERR "scanlog: read failed no data\n");
-                return -EIO;
-        }
-
         if (count > RTAS_DATA_BUF_SIZE)
                 count = RTAS_DATA_BUF_SIZE;
 
@@ -146,11 +141,6 @@ static int scanlog_open(struct inode * inode, struct file * file)
         struct proc_dir_entry *dp = PDE(inode);
         unsigned int *data = (unsigned int *)dp->data;
 
-        if (!data) {
-                printk(KERN_ERR "scanlog: open failed no data\n");
-                return -EIO;
-        }
-
         if (data[0] != 0) {
                 /* This imperfect test stops a second copy of the
                  * data (or a reset while data is being copied)
@@ -168,10 +158,6 @@ static int scanlog_release(struct inode * inode, struct file * file)
         struct proc_dir_entry *dp = PDE(inode);
         unsigned int *data = (unsigned int *)dp->data;
 
-        if (!data) {
-                printk(KERN_ERR "scanlog: release failed no data\n");
-                return -EIO;
-        }
         data[0] = 0;
 
         return 0;
@@ -200,12 +186,11 @@ static int __init scanlog_init(void)
         if (!data)
                 goto err;
 
-        ent = proc_create("ppc64/rtas/scan-log-dump", S_IRUSR, NULL,
-                          &scanlog_fops);
+        ent = proc_create_data("ppc64/rtas/scan-log-dump", S_IRUSR, NULL,
+                               &scanlog_fops, data);
         if (!ent)
                 goto err;
 
-        ent->data = data;
         proc_ppc64_scan_log_dump = ent;
 
         return 0;
diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c
index 3d920376f58e..a0fa4ebb39c6 100644
--- a/arch/powerpc/sysdev/fsl_rio.c
+++ b/arch/powerpc/sysdev/fsl_rio.c
@@ -176,6 +176,7 @@ struct rio_priv {
 
 /**
  * fsl_rio_doorbell_send - Send a MPC85xx doorbell message
+ * @mport: RapidIO master port info
  * @index: ID of RapidIO interface
  * @destid: Destination ID of target device
  * @data: 16-bit info field of RapidIO doorbell message
@@ -211,6 +212,7 @@ static int fsl_rio_doorbell_send(struct rio_mport *mport,
 
 /**
  * fsl_local_config_read - Generate a MPC85xx local config space read
+ * @mport: RapidIO master port info
  * @index: ID of RapdiIO interface
  * @offset: Offset into configuration space
  * @len: Length (in bytes) of the maintenance transaction
@@ -232,6 +234,7 @@ static int fsl_local_config_read(struct rio_mport *mport,
 
 /**
  * fsl_local_config_write - Generate a MPC85xx local config space write
+ * @mport: RapidIO master port info
  * @index: ID of RapdiIO interface
  * @offset: Offset into configuration space
  * @len: Length (in bytes) of the maintenance transaction
@@ -254,6 +257,7 @@ static int fsl_local_config_write(struct rio_mport *mport,
 
 /**
  * fsl_rio_config_read - Generate a MPC85xx read maintenance transaction
+ * @mport: RapidIO master port info
  * @index: ID of RapdiIO interface
  * @destid: Destination ID of transaction
  * @hopcount: Number of hops to target device
@@ -295,6 +299,7 @@ fsl_rio_config_read(struct rio_mport *mport, int index, u16 destid,
 
 /**
  * fsl_rio_config_write - Generate a MPC85xx write maintenance transaction
+ * @mport: RapidIO master port info
  * @index: ID of RapdiIO interface
  * @destid: Destination ID of transaction
  * @hopcount: Number of hops to target device
@@ -985,8 +990,8 @@ static inline void fsl_rio_info(struct device *dev, u32 ccsr)
 }
 
 /**
- * fsl_rio_setup - Setup MPC85xx RapidIO interface
- * @fsl_rio_setup - Setup Freescale PowerPC RapidIO interface
+ * fsl_rio_setup - Setup Freescale PowerPC RapidIO interface
+ * @dev: of_device pointer
  *
  * Initializes MPC85xx RapidIO hardware interface, configures
  * master port with system-specific info, and registers the
diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index 324c01b70ddd..3a7054e2bb75 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -389,8 +389,8 @@ static int __init gfar_of_init(void)
                         }
 
                         gfar_data.phy_id = *id;
-                        snprintf(gfar_data.bus_id, MII_BUS_ID_SIZE, "%x",
-                                        res.start);
+                        snprintf(gfar_data.bus_id, MII_BUS_ID_SIZE, "%llx",
+                                 (unsigned long long)res.start);
 
                         of_node_put(phy);
                         of_node_put(mdio);
diff --git a/arch/powerpc/sysdev/xilinx_intc.c b/arch/powerpc/sysdev/xilinx_intc.c
index ba8eea2bcce0..b7aefd0d45cb 100644
--- a/arch/powerpc/sysdev/xilinx_intc.c
+++ b/arch/powerpc/sysdev/xilinx_intc.c
@@ -107,7 +107,7 @@ xilinx_intc_init(struct device_node *np)
         }
         regs = ioremap(res.start, 32);
 
-        printk(KERN_INFO "Xilinx intc at 0x%08X mapped to 0x%p\n",
+        printk(KERN_INFO "Xilinx intc at 0x%08LX mapped to 0x%p\n",
                 res.start, regs);
 
         /* Setup interrupt controller */
diff --git a/arch/s390/kernel/sys_s390.c b/arch/s390/kernel/sys_s390.c
index 988d0d64c2c8..5fdb799062b7 100644
--- a/arch/s390/kernel/sys_s390.c
+++ b/arch/s390/kernel/sys_s390.c
@@ -32,23 +32,6 @@
 #include <asm/uaccess.h>
 #include "entry.h"
 
-/*
- * sys_pipe() is the normal C calling standard for creating
- * a pipe. It's not the way Unix traditionally does this, though.
- */
-asmlinkage long sys_pipe(unsigned long __user *fildes)
-{
-        int fd[2];
-        int error;
-
-        error = do_pipe(fd);
-        if (!error) {
-                if (copy_to_user(fildes, fd, 2*sizeof(int)))
-                        error = -EFAULT;
-        }
-        return error;
-}
-
 /* common code for old and new mmaps */
 static inline long do_mmap2(
         unsigned long addr, unsigned long len,
diff --git a/arch/sh/kernel/sys_sh64.c b/arch/sh/kernel/sys_sh64.c
index 578004d71e02..91fb8445a5a0 100644
--- a/arch/sh/kernel/sys_sh64.c
+++ b/arch/sh/kernel/sys_sh64.c
@@ -31,23 +31,6 @@
 #include <asm/unistd.h>
 
 /*
- * sys_pipe() is the normal C calling standard for creating
- * a pipe. It's not the way Unix traditionally does this, though.
- */
-asmlinkage int sys_pipe(unsigned long * fildes)
-{
-        int fd[2];
-        int error;
-
-        error = do_pipe(fd);
-        if (!error) {
-                if (copy_to_user(fildes, fd, 2*sizeof(int)))
-                        error = -EFAULT;
-        }
-        return error;
-}
-
-/*
  * Do a system call from kernel instead of calling sys_execve so we
  * end up with proper pt_regs.
  */
diff --git a/arch/sparc/kernel/setup.c b/arch/sparc/kernel/setup.c
index 3c13137685da..8a55c4f0df84 100644
--- a/arch/sparc/kernel/setup.c
+++ b/arch/sparc/kernel/setup.c
@@ -180,11 +180,9 @@ static void __init boot_flags_init(char *commands)
 
 /* This routine will in the future do all the nasty prom stuff
  * to probe for the mmu type and its parameters, etc. This will
- * also be where SMP things happen plus the Sparc specific memory
- * physical memory probe as on the alpha.
+ * also be where SMP things happen.
  */
 
-extern int prom_probe_memory(void);
 extern void sun4c_probe_vac(void);
 extern char cputypval;
 extern unsigned long start, end;
@@ -268,7 +266,6 @@ void __init setup_arch(char **cmdline_p)
         if (ARCH_SUN4C_SUN4)
                 sun4c_probe_vac();
         load_mmu();
-        (void) prom_probe_memory();
 
         phys_base = 0xffffffffUL;
         highest_paddr = 0UL;
diff --git a/arch/sparc/mm/fault.c b/arch/sparc/mm/fault.c
index e4d9c8e19df5..abd50795a7b6 100644
--- a/arch/sparc/mm/fault.c
+++ b/arch/sparc/mm/fault.c
@@ -47,64 +47,15 @@ int vac_size, vac_linesize, vac_do_hw_vac_flushes;
 int vac_entries_per_context, vac_entries_per_segment;
 int vac_entries_per_page;
 
-/* Nice, simple, prom library does all the sweating for us. ;) */
-int prom_probe_memory (void)
+/* Return how much physical memory we have.  */
+unsigned long probe_memory(void)
 {
-        register struct linux_mlist_v0 *mlist;
-        register unsigned long bytes, base_paddr, tally;
-        register int i;
-
-        i = 0;
-        mlist= *prom_meminfo()->v0_available;
-        bytes = tally = mlist->num_bytes;
-        base_paddr = (unsigned long) mlist->start_adr;
-  
-        sp_banks[0].base_addr = base_paddr;
-        sp_banks[0].num_bytes = bytes;
-
-        while (mlist->theres_more != (void *) 0){
-                i++;
-                mlist = mlist->theres_more;
-                bytes = mlist->num_bytes;
-                tally += bytes;
-                if (i > SPARC_PHYS_BANKS-1) {
-                        printk ("The machine has more banks than "
-                                "this kernel can support\n"
-                                "Increase the SPARC_PHYS_BANKS "
-                                "setting (currently %d)\n",
-                                SPARC_PHYS_BANKS);
-                        i = SPARC_PHYS_BANKS-1;
-                        break;
-                }
-    
-                sp_banks[i].base_addr = (unsigned long) mlist->start_adr;
-                sp_banks[i].num_bytes = mlist->num_bytes;
-        }
-
-        i++;
-        sp_banks[i].base_addr = 0xdeadbeef;
-        sp_banks[i].num_bytes = 0;
-
-        /* Now mask all bank sizes on a page boundary, it is all we can
-         * use anyways.
-         */
-        for(i=0; sp_banks[i].num_bytes != 0; i++)
-                sp_banks[i].num_bytes &= PAGE_MASK;
-
-        return tally;
-}
-
-/* Traverse the memory lists in the prom to see how much physical we
- * have.
- */
-unsigned long
-probe_memory(void)
-{
-        int total;
+        unsigned long total = 0;
+        int i;
 
-        total = prom_probe_memory();
+        for (i = 0; sp_banks[i].num_bytes; i++)
+                total += sp_banks[i].num_bytes;
 
-        /* Oh man, much nicer, keep the dirt in promlib. */
         return total;
 }
 
diff --git a/arch/sparc/prom/init.c b/arch/sparc/prom/init.c
index 50abfb1b880e..2fa3a474e3a2 100644
--- a/arch/sparc/prom/init.c
+++ b/arch/sparc/prom/init.c
@@ -21,8 +21,6 @@ linux_sun4_romvec *sun4_romvec;
 /* The root node of the prom device tree. */
 int prom_root_node;
 
-int prom_stdin, prom_stdout;
-
 /* Pointer to the device tree operations structure. */
 struct linux_nodeops *prom_nodeops;
 
@@ -74,11 +72,6 @@ void __init prom_init(struct linux_romvec *rp)
            (((unsigned long) prom_nodeops) == -1))
                 prom_halt();
 
-        if(prom_vers == PROM_V2 || prom_vers == PROM_V3) {
-                prom_stdout = *romvec->pv_v2bootargs.fd_stdout;
-                prom_stdin  = *romvec->pv_v2bootargs.fd_stdin;
-        }
-        
         prom_meminit();
 
         prom_ranges_init();
diff --git a/arch/sparc/prom/memory.c b/arch/sparc/prom/memory.c
index b0c0f9c4fc14..947f047dc95a 100644
--- a/arch/sparc/prom/memory.c
+++ b/arch/sparc/prom/memory.c
@@ -1,215 +1,100 @@
-/* $Id: memory.c,v 1.15 2000/01/29 01:09:12 anton Exp $
- * memory.c: Prom routine for acquiring various bits of information
+/* memory.c: Prom routine for acquiring various bits of information
  *           about RAM on the machine, both virtual and physical.
  *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1995, 2008 David S. Miller (davem@davemloft.net)
  * Copyright (C) 1997 Michael A. Griffith (grif@acm.org)
  */
 
 #include <linux/kernel.h>
+#include <linux/sort.h>
 #include <linux/init.h>
 
 #include <asm/openprom.h>
 #include <asm/sun4prom.h>
 #include <asm/oplib.h>
+#include <asm/page.h>
 
-/* This routine, for consistency, returns the ram parameters in the
- * V0 prom memory descriptor format.  I choose this format because I
- * think it was the easiest to work with.  I feel the religious
- * arguments now... ;)  Also, I return the linked lists sorted to
- * prevent paging_init() upset stomach as I have not yet written
- * the pepto-bismol kernel module yet.
- */
+static int __init prom_meminit_v0(void)
+{
+        struct linux_mlist_v0 *p;
+        int index;
+
+        index = 0;
+        for (p = *(romvec->pv_v0mem.v0_available); p; p = p->theres_more) {
+                sp_banks[index].base_addr = (unsigned long) p->start_adr;
+                sp_banks[index].num_bytes = p->num_bytes;
+                index++;
+        }
 
-struct linux_prom_registers prom_reg_memlist[64];
-struct linux_prom_registers prom_reg_tmp[64];
+        return index;
+}
 
-struct linux_mlist_v0 prom_phys_total[64];
-struct linux_mlist_v0 prom_prom_taken[64];
-struct linux_mlist_v0 prom_phys_avail[64];
+static int __init prom_meminit_v2(void)
+{
+        struct linux_prom_registers reg[64];
+        int node, size, num_ents, i;
 
-struct linux_mlist_v0 *prom_ptot_ptr = prom_phys_total;
-struct linux_mlist_v0 *prom_ptak_ptr = prom_prom_taken;
-struct linux_mlist_v0 *prom_pavl_ptr = prom_phys_avail;
+        node = prom_searchsiblings(prom_getchild(prom_root_node), "memory");
+        size = prom_getproperty(node, "available", (char *) reg, sizeof(reg));
+        num_ents = size / sizeof(struct linux_prom_registers);
 
-struct linux_mem_v0 prom_memlist;
+        for (i = 0; i < num_ents; i++) {
+                sp_banks[i].base_addr = reg[i].phys_addr;
+                sp_banks[i].num_bytes = reg[i].reg_size;
+        }
 
+        return num_ents;
+}
 
-/* Internal Prom library routine to sort a linux_mlist_v0 memory
- * list.  Used below in initialization.
- */
-static void __init
-prom_sortmemlist(struct linux_mlist_v0 *thislist)
+static int __init prom_meminit_sun4(void)
 {
-        int swapi = 0;
-        int i, mitr, tmpsize;
-        char *tmpaddr;
-        char *lowest;
-
-        for(i=0; thislist[i].theres_more; i++) {
-                lowest = thislist[i].start_adr;
-                for(mitr = i+1; thislist[mitr-1].theres_more; mitr++)
-                        if(thislist[mitr].start_adr < lowest) {
-                                lowest = thislist[mitr].start_adr;
-                                swapi = mitr;
-                        }
-                if(lowest == thislist[i].start_adr) continue;
-                tmpaddr = thislist[swapi].start_adr;
-                tmpsize = thislist[swapi].num_bytes;
-                for(mitr = swapi; mitr > i; mitr--) {
-                        thislist[mitr].start_adr = thislist[mitr-1].start_adr;
-                        thislist[mitr].num_bytes = thislist[mitr-1].num_bytes;
-                }
-                thislist[i].start_adr = tmpaddr;
-                thislist[i].num_bytes = tmpsize;
-        }
+#ifdef CONFIG_SUN4
+        sp_banks[0].base_addr = 0;
+        sp_banks[0].num_bytes = *(sun4_romvec->memoryavail);
+#endif
+        return 1;
+}
+
+static int sp_banks_cmp(const void *a, const void *b)
+{
+        const struct sparc_phys_banks *x = a, *y = b;
 
-        return;
+        if (x->base_addr > y->base_addr)
+                return 1;
+        if (x->base_addr < y->base_addr)
+                return -1;
+        return 0;
 }
 
 /* Initialize the memory lists based upon the prom version. */
 void __init prom_meminit(void)
 {
-        int node = 0;
-        unsigned int iter, num_regs;
-        struct linux_mlist_v0 *mptr;  /* ptr for traversal */
+        int i, num_ents = 0;
 
-        switch(prom_vers) {
+        switch (prom_vers) {
         case PROM_V0:
-                /* Nice, kind of easier to do in this case. */
-                /* First, the total physical descriptors. */
-                for(mptr = (*(romvec->pv_v0mem.v0_totphys)), iter=0;
-                    mptr; mptr=mptr->theres_more, iter++) {
-                        prom_phys_total[iter].start_adr = mptr->start_adr;
-                        prom_phys_total[iter].num_bytes = mptr->num_bytes;
-                        prom_phys_total[iter].theres_more = &prom_phys_total[iter+1];
-                }
-                prom_phys_total[iter-1].theres_more = NULL;
-                /* Second, the total prom taken descriptors. */
-                for(mptr = (*(romvec->pv_v0mem.v0_prommap)), iter=0;
-                    mptr; mptr=mptr->theres_more, iter++) {
-                        prom_prom_taken[iter].start_adr = mptr->start_adr;
-                        prom_prom_taken[iter].num_bytes = mptr->num_bytes;
-                        prom_prom_taken[iter].theres_more = &prom_prom_taken[iter+1];
-                }
-                prom_prom_taken[iter-1].theres_more = NULL;
-                /* Last, the available physical descriptors. */
-                for(mptr = (*(romvec->pv_v0mem.v0_available)), iter=0;
-                    mptr; mptr=mptr->theres_more, iter++) {
-                        prom_phys_avail[iter].start_adr = mptr->start_adr;
-                        prom_phys_avail[iter].num_bytes = mptr->num_bytes;
-                        prom_phys_avail[iter].theres_more = &prom_phys_avail[iter+1];
-                }
-                prom_phys_avail[iter-1].theres_more = NULL;
-                /* Sort all the lists. */
-                prom_sortmemlist(prom_phys_total);
-                prom_sortmemlist(prom_prom_taken);
-                prom_sortmemlist(prom_phys_avail);
+                num_ents = prom_meminit_v0();
                 break;
+
         case PROM_V2:
         case PROM_V3:
-                /* Grrr, have to traverse the prom device tree ;( */
-                node = prom_getchild(prom_root_node);
-                node = prom_searchsiblings(node, "memory");
-                num_regs = prom_getproperty(node, "available",
-                                            (char *) prom_reg_memlist,
-                                            sizeof(prom_reg_memlist));
-                num_regs = (num_regs/sizeof(struct linux_prom_registers));
-                for(iter=0; iter<num_regs; iter++) {
-                        prom_phys_avail[iter].start_adr =
-                                (char *) prom_reg_memlist[iter].phys_addr;
-                        prom_phys_avail[iter].num_bytes =
-                                (unsigned long) prom_reg_memlist[iter].reg_size;
-                        prom_phys_avail[iter].theres_more =
-                                &prom_phys_avail[iter+1];
-                }
-                prom_phys_avail[iter-1].theres_more = NULL;
-
-                num_regs = prom_getproperty(node, "reg",
-                                            (char *) prom_reg_memlist,
-                                            sizeof(prom_reg_memlist));
-                num_regs = (num_regs/sizeof(struct linux_prom_registers));
-                for(iter=0; iter<num_regs; iter++) {
-                        prom_phys_total[iter].start_adr =
-                                (char *) prom_reg_memlist[iter].phys_addr;
-                        prom_phys_total[iter].num_bytes =
-                                (unsigned long) prom_reg_memlist[iter].reg_size;
-                        prom_phys_total[iter].theres_more =
-                                &prom_phys_total[iter+1];
-                }
-                prom_phys_total[iter-1].theres_more = NULL;
-
-                node = prom_getchild(prom_root_node);
-                node = prom_searchsiblings(node, "virtual-memory");
-                num_regs = prom_getproperty(node, "available",
-                                            (char *) prom_reg_memlist,
-                                            sizeof(prom_reg_memlist));
-                num_regs = (num_regs/sizeof(struct linux_prom_registers));
-
-                /* Convert available virtual areas to taken virtual
-                 * areas.  First sort, then convert.
-                 */
-                for(iter=0; iter<num_regs; iter++) {
-                        prom_prom_taken[iter].start_adr =
-                                (char *) prom_reg_memlist[iter].phys_addr;
-                        prom_prom_taken[iter].num_bytes =
-                                (unsigned long) prom_reg_memlist[iter].reg_size;
-                        prom_prom_taken[iter].theres_more =
-                                &prom_prom_taken[iter+1];
-                }
-                prom_prom_taken[iter-1].theres_more = NULL;
-
-                prom_sortmemlist(prom_prom_taken);
-
-                /* Finally, convert. */
-                for(iter=0; iter<num_regs; iter++) {
-                        prom_prom_taken[iter].start_adr =
-                                prom_prom_taken[iter].start_adr +
-                                        prom_prom_taken[iter].num_bytes;
-                        prom_prom_taken[iter].num_bytes =
-                                prom_prom_taken[iter+1].start_adr -
-                                        prom_prom_taken[iter].start_adr;
-                }
-                prom_prom_taken[iter-1].num_bytes =
-                        0xffffffff - (unsigned long) prom_prom_taken[iter-1].start_adr;
-
-                /* Sort the other two lists. */
-                prom_sortmemlist(prom_phys_total);
-                prom_sortmemlist(prom_phys_avail);
+                num_ents = prom_meminit_v2();
                 break;
 
         case PROM_SUN4:
-#ifdef CONFIG_SUN4      
-                /* how simple :) */
-                prom_phys_total[0].start_adr = NULL;
-                prom_phys_total[0].num_bytes = *(sun4_romvec->memorysize);
-                prom_phys_total[0].theres_more = NULL;
-                prom_prom_taken[0].start_adr = NULL; 
-                prom_prom_taken[0].num_bytes = 0x0;
-                prom_prom_taken[0].theres_more = NULL;
-                prom_phys_avail[0].start_adr = NULL;
-                prom_phys_avail[0].num_bytes = *(sun4_romvec->memoryavail);
-                prom_phys_avail[0].theres_more = NULL;
-#endif
+                num_ents = prom_meminit_sun4();
                 break;
 
         default:
                 break;
-        };
-
-        /* Link all the lists into the top-level descriptor. */
-        prom_memlist.v0_totphys=&prom_ptot_ptr;
-        prom_memlist.v0_prommap=&prom_ptak_ptr;
-        prom_memlist.v0_available=&prom_pavl_ptr;
+        }
+        sort(sp_banks, num_ents, sizeof(struct sparc_phys_banks),
+             sp_banks_cmp, NULL);
 
-        return;
-}
+        /* Sentinel.  */
+        sp_banks[num_ents].base_addr = 0xdeadbeef;
+        sp_banks[num_ents].num_bytes = 0;
 
-/* This returns a pointer to our libraries internal v0 format
- * memory descriptor.
- */
-struct linux_mem_v0 *
-prom_meminfo(void)
-{
-        return &prom_memlist;
+        for (i = 0; i < num_ents; i++)
+                sp_banks[i].num_bytes &= PAGE_MASK;
 }
diff --git a/arch/sparc64/kernel/pci.c b/arch/sparc64/kernel/pci.c
index dbf2fc2f4d87..112b09f16f36 100644
--- a/arch/sparc64/kernel/pci.c
+++ b/arch/sparc64/kernel/pci.c
@@ -350,8 +350,7 @@ static void pci_parse_of_addrs(struct of_device *op,
 
 struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm,
                                   struct device_node *node,
-                                  struct pci_bus *bus, int devfn,
-                                  int host_controller)
+                                  struct pci_bus *bus, int devfn)
 {
         struct dev_archdata *sd;
         struct pci_dev *dev;
@@ -390,43 +389,28 @@ struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm,
         dev->devfn = devfn;
         dev->multifunction = 0;         /* maybe a lie? */
 
-        if (host_controller) {
-                if (tlb_type != hypervisor) {
-                        pci_read_config_word(dev, PCI_VENDOR_ID,
-                                             &dev->vendor);
-                        pci_read_config_word(dev, PCI_DEVICE_ID,
-                                             &dev->device);
-                } else {
-                        dev->vendor = PCI_VENDOR_ID_SUN;
-                        dev->device = 0x80f0;
-                }
-                dev->cfg_size = 256;
-                dev->class = PCI_CLASS_BRIDGE_HOST << 8;
-                sprintf(pci_name(dev), "%04x:%02x:%02x.%d", pci_domain_nr(bus),
-                        0x00, PCI_SLOT(devfn), PCI_FUNC(devfn));
-        } else {
-                dev->vendor = of_getintprop_default(node, "vendor-id", 0xffff);
-                dev->device = of_getintprop_default(node, "device-id", 0xffff);
-                dev->subsystem_vendor =
-                        of_getintprop_default(node, "subsystem-vendor-id", 0);
-                dev->subsystem_device =
-                        of_getintprop_default(node, "subsystem-id", 0);
-
-                dev->cfg_size = pci_cfg_space_size(dev);
-
-                /* We can't actually use the firmware value, we have
-                 * to read what is in the register right now.  One
-                 * reason is that in the case of IDE interfaces the
-                 * firmware can sample the value before the the IDE
-                 * interface is programmed into native mode.
-                 */
-                pci_read_config_dword(dev, PCI_CLASS_REVISION, &class);
-                dev->class = class >> 8;
-                dev->revision = class & 0xff;
+        dev->vendor = of_getintprop_default(node, "vendor-id", 0xffff);
+        dev->device = of_getintprop_default(node, "device-id", 0xffff);
+        dev->subsystem_vendor =
+                of_getintprop_default(node, "subsystem-vendor-id", 0);
+        dev->subsystem_device =
+                of_getintprop_default(node, "subsystem-id", 0);
+
+        dev->cfg_size = pci_cfg_space_size(dev);
+
+        /* We can't actually use the firmware value, we have
+         * to read what is in the register right now.  One
+         * reason is that in the case of IDE interfaces the
+         * firmware can sample the value before the the IDE
+         * interface is programmed into native mode.
+         */
+        pci_read_config_dword(dev, PCI_CLASS_REVISION, &class);
+        dev->class = class >> 8;
+        dev->revision = class & 0xff;
+
+        sprintf(pci_name(dev), "%04x:%02x:%02x.%d", pci_domain_nr(bus),
+                dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn));
 
-                sprintf(pci_name(dev), "%04x:%02x:%02x.%d", pci_domain_nr(bus),
-                        dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn));
-        }
         if (ofpci_verbose)
                 printk("    class: 0x%x device name: %s\n",
                        dev->class, pci_name(dev));
@@ -441,26 +425,21 @@ struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm,
         dev->current_state = 4;         /* unknown power state */
         dev->error_state = pci_channel_io_normal;
 
-        if (host_controller) {
+        if (!strcmp(type, "pci") || !strcmp(type, "pciex")) {
+                /* a PCI-PCI bridge */
                 dev->hdr_type = PCI_HEADER_TYPE_BRIDGE;
                 dev->rom_base_reg = PCI_ROM_ADDRESS1;
-                dev->irq = PCI_IRQ_NONE;
+        } else if (!strcmp(type, "cardbus")) {
+                dev->hdr_type = PCI_HEADER_TYPE_CARDBUS;
         } else {
-                if (!strcmp(type, "pci") || !strcmp(type, "pciex")) {
-                        /* a PCI-PCI bridge */
-                        dev->hdr_type = PCI_HEADER_TYPE_BRIDGE;
-                        dev->rom_base_reg = PCI_ROM_ADDRESS1;
-                } else if (!strcmp(type, "cardbus")) {
-                        dev->hdr_type = PCI_HEADER_TYPE_CARDBUS;
-                } else {
-                        dev->hdr_type = PCI_HEADER_TYPE_NORMAL;
-                        dev->rom_base_reg = PCI_ROM_ADDRESS;
+                dev->hdr_type = PCI_HEADER_TYPE_NORMAL;
+                dev->rom_base_reg = PCI_ROM_ADDRESS;
 
-                        dev->irq = sd->op->irqs[0];
-                        if (dev->irq == 0xffffffff)
-                                dev->irq = PCI_IRQ_NONE;
-                }
+                dev->irq = sd->op->irqs[0];
+                if (dev->irq == 0xffffffff)
+                        dev->irq = PCI_IRQ_NONE;
         }
+
         pci_parse_of_addrs(sd->op, node, dev);
 
         if (ofpci_verbose)
@@ -749,7 +728,7 @@ static void __devinit pci_of_scan_bus(struct pci_pbm_info *pbm,
                 prev_devfn = devfn;
 
                 /* create a new pci_dev for this device */
-                dev = of_create_pci_dev(pbm, child, bus, devfn, 0);
+                dev = of_create_pci_dev(pbm, child, bus, devfn);
                 if (!dev)
                         continue;
                 if (ofpci_verbose)
@@ -796,48 +775,9 @@ static void __devinit pci_bus_register_of_sysfs(struct pci_bus *bus)
                 pci_bus_register_of_sysfs(child_bus);
 }
 
-int pci_host_bridge_read_pci_cfg(struct pci_bus *bus_dev,
-                                 unsigned int devfn,
-                                 int where, int size,
-                                 u32 *value)
-{
-        static u8 fake_pci_config[] = {
-                0x8e, 0x10, /* Vendor: 0x108e (Sun) */
-                0xf0, 0x80, /* Device: 0x80f0 (Fire) */
-                0x46, 0x01, /* Command: 0x0146 (SERR, PARITY, MASTER, MEM) */
-                0xa0, 0x22, /* Status: 0x02a0 (DEVSEL_MED, FB2B, 66MHZ) */
-                0x00, 0x00, 0x00, 0x06, /* Class: 0x06000000 host bridge */
-                0x00, /* Cacheline: 0x00 */
-                0x40, /* Latency: 0x40 */
-                0x00, /* Header-Type: 0x00 normal */
-        };
-
-        *value = 0;
-        if (where >= 0 && where < sizeof(fake_pci_config) &&
-            (where + size) >= 0 &&
-            (where + size) < sizeof(fake_pci_config) &&
-            size <= sizeof(u32)) {
-                while (size--) {
-                        *value <<= 8;
-                        *value |= fake_pci_config[where + size];
-                }
-        }
-
-        return PCIBIOS_SUCCESSFUL;
-}
-
-int pci_host_bridge_write_pci_cfg(struct pci_bus *bus_dev,
-                                  unsigned int devfn,
-                                  int where, int size,
-                                  u32 value)
-{
-        return PCIBIOS_SUCCESSFUL;
-}
-
 struct pci_bus * __devinit pci_scan_one_pbm(struct pci_pbm_info *pbm)
 {
         struct device_node *node = pbm->prom_node;
-        struct pci_dev *host_pdev;
         struct pci_bus *bus;
 
         printk("PCI: Scanning PBM %s\n", node->full_name);
@@ -855,10 +795,6 @@ struct pci_bus * __devinit pci_scan_one_pbm(struct pci_pbm_info *pbm)
         bus->resource[0] = &pbm->io_space;
         bus->resource[1] = &pbm->mem_space;
 
-        /* Create the dummy host bridge and link it in.  */
-        host_pdev = of_create_pci_dev(pbm, node, bus, 0x00, 1);
-        bus->self = host_pdev;
-
         pci_of_scan_bus(pbm, node, bus);
         pci_bus_add_devices(bus);
         pci_bus_register_of_sysfs(bus);
diff --git a/arch/sparc64/kernel/pci_common.c b/arch/sparc64/kernel/pci_common.c
index 923e0bcc3bfd..19fa621d6a60 100644
--- a/arch/sparc64/kernel/pci_common.c
+++ b/arch/sparc64/kernel/pci_common.c
@@ -264,9 +264,6 @@ static int sun4v_read_pci_cfg(struct pci_bus *bus_dev, unsigned int devfn,
         unsigned int func = PCI_FUNC(devfn);
         unsigned long ret;
 
-        if (!bus && devfn == 0x00)
-                return pci_host_bridge_read_pci_cfg(bus_dev, devfn, where,
-                                                    size, value);
         if (config_out_of_range(pbm, bus, devfn, where)) {
                 ret = ~0UL;
         } else {
@@ -300,9 +297,6 @@ static int sun4v_write_pci_cfg(struct pci_bus *bus_dev, unsigned int devfn,
         unsigned int func = PCI_FUNC(devfn);
         unsigned long ret;
 
-        if (!bus && devfn == 0x00)
-                return pci_host_bridge_write_pci_cfg(bus_dev, devfn, where,
-                                                     size, value);
         if (config_out_of_range(pbm, bus, devfn, where)) {
                 /* Do nothing. */
         } else {
diff --git a/arch/sparc64/kernel/pci_impl.h b/arch/sparc64/kernel/pci_impl.h
index 218bac4ff79b..c385d126be11 100644
--- a/arch/sparc64/kernel/pci_impl.h
+++ b/arch/sparc64/kernel/pci_impl.h
@@ -167,15 +167,6 @@ extern void pci_get_pbm_props(struct pci_pbm_info *pbm);
 extern struct pci_bus *pci_scan_one_pbm(struct pci_pbm_info *pbm);
 extern void pci_determine_mem_io_space(struct pci_pbm_info *pbm);
 
-extern int pci_host_bridge_read_pci_cfg(struct pci_bus *bus_dev,
-                                        unsigned int devfn,
-                                        int where, int size,
-                                        u32 *value);
-extern int pci_host_bridge_write_pci_cfg(struct pci_bus *bus_dev,
-                                         unsigned int devfn,
-                                         int where, int size,
-                                         u32 value);
-
 /* Error reporting support. */
 extern void pci_scan_for_target_abort(struct pci_pbm_info *, struct pci_bus *);
 extern void pci_scan_for_master_abort(struct pci_pbm_info *, struct pci_bus *);
diff --git a/arch/sparc64/kernel/process.c b/arch/sparc64/kernel/process.c
index 056013749157..500ac6d483a0 100644
--- a/arch/sparc64/kernel/process.c
+++ b/arch/sparc64/kernel/process.c
@@ -591,12 +591,6 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long sp,
         if (clone_flags & CLONE_SETTLS)
                 t->kregs->u_regs[UREG_G7] = regs->u_regs[UREG_I3];
 
-        /* We do not want to accidently trigger system call restart
-         * handling in the new thread.  Therefore, clear out the trap
-         * type, which will make pt_regs_regs_is_syscall() return false.
-         */
-        pt_regs_clear_trap_type(t->kregs);
-
         return 0;
 }
 
diff --git a/arch/sparc64/kernel/signal.c b/arch/sparc64/kernel/signal.c
index f2d88d8f7a42..45d6bf632daa 100644
--- a/arch/sparc64/kernel/signal.c
+++ b/arch/sparc64/kernel/signal.c
@@ -332,6 +332,9 @@ void do_rt_sigreturn(struct pt_regs *regs)
         regs->tpc = tpc;
         regs->tnpc = tnpc;
 
+        /* Prevent syscall restart.  */
+        pt_regs_clear_trap_type(regs);
+
         sigdelsetmask(&set, ~_BLOCKABLE);
         spin_lock_irq(&current->sighand->siglock);
         current->blocked = set;
@@ -515,7 +518,8 @@ static void do_signal(struct pt_regs *regs, unsigned long orig_i0)
         siginfo_t info;
         int signr;
         
-        if (pt_regs_is_syscall(regs)) {
+        if (pt_regs_is_syscall(regs) &&
+            (regs->tstate & (TSTATE_XCARRY | TSTATE_ICARRY))) {
                 pt_regs_clear_trap_type(regs);
                 cookie.restart_syscall = 1;
         } else
diff --git a/arch/sparc64/kernel/signal32.c b/arch/sparc64/kernel/signal32.c
index 91f8d0826db1..9415d2c918c5 100644
--- a/arch/sparc64/kernel/signal32.c
+++ b/arch/sparc64/kernel/signal32.c
@@ -268,6 +268,9 @@ void do_sigreturn32(struct pt_regs *regs)
         regs->tstate &= ~(TSTATE_ICC|TSTATE_XCC);
         regs->tstate |= psr_to_tstate_icc(psr);
 
+        /* Prevent syscall restart.  */
+        pt_regs_clear_trap_type(regs);
+
         err |= __get_user(fpu_save, &sf->fpu_save);
         if (fpu_save)
                 err |= restore_fpu_state32(regs, &sf->fpu_state);
@@ -351,6 +354,9 @@ asmlinkage void do_rt_sigreturn32(struct pt_regs *regs)
         regs->tstate &= ~(TSTATE_ICC|TSTATE_XCC);
         regs->tstate |= psr_to_tstate_icc(psr);
 
+        /* Prevent syscall restart.  */
+        pt_regs_clear_trap_type(regs);
+
         err |= __get_user(fpu_save, &sf->fpu_save);
         if (fpu_save)
                 err |= restore_fpu_state32(regs, &sf->fpu_state);
diff --git a/arch/um/Makefile b/arch/um/Makefile
index dbeab15e7bb7..01b97c19a8ba 100644
--- a/arch/um/Makefile
+++ b/arch/um/Makefile
@@ -77,7 +77,10 @@ include $(srctree)/$(ARCH_DIR)/Makefile-os-$(OS)
 KERNEL_DEFINES = $(strip -Derrno=kernel_errno -Dsigprocmask=kernel_sigprocmask \
                          -Dmktime=kernel_mktime $(ARCH_KERNEL_DEFINES))
 KBUILD_CFLAGS += $(KERNEL_DEFINES)
-KBUILD_CFLAGS += $(call cc-option,-fno-unit-at-a-time,)
+# Disable unit-at-a-time mode on pre-gcc-4.0 compilers, it makes gcc use
+# a lot more stack due to the lack of sharing of stacklots:
+KBUILD_CFLAGS += $(shell if [ $(call cc-version) -lt 0400 ] ; then \
+                        echo $(call cc-option,-fno-unit-at-a-time); fi ;)
 
 PHONY += linux
 
diff --git a/arch/um/kernel/syscall.c b/arch/um/kernel/syscall.c
index 9cffc628a37e..128ee85bc8d9 100644
--- a/arch/um/kernel/syscall.c
+++ b/arch/um/kernel/syscall.c
@@ -73,23 +73,6 @@ long old_mmap(unsigned long addr, unsigned long len,
  out:
         return err;
 }
-/*
- * sys_pipe() is the normal C calling standard for creating
- * a pipe. It's not the way unix traditionally does this, though.
- */
-long sys_pipe(unsigned long __user * fildes)
-{
-        int fd[2];
-        long error;
-
-        error = do_pipe(fd);
-        if (!error) {
-                if (copy_to_user(fildes, fd, sizeof(fd)))
-                        error = -EFAULT;
-        }
-        return error;
-}
-
 
 long sys_uname(struct old_utsname __user * name)
 {
diff --git a/arch/v850/kernel/syscalls.c b/arch/v850/kernel/syscalls.c
index 003db9c8c44a..1a83daf8e24f 100644
--- a/arch/v850/kernel/syscalls.c
+++ b/arch/v850/kernel/syscalls.c
@@ -132,23 +132,6 @@ sys_ipc (uint call, int first, int second, int third, void *ptr, long fifth)
         return ret;
 }
 
-/*
- * sys_pipe() is the normal C calling standard for creating
- * a pipe. It's not the way unix traditionally does this, though.
- */
-int sys_pipe (int *fildes)
-{
-        int fd[2];
-        int error;
-
-        error = do_pipe (fd);
-        if (!error) {
-                if (copy_to_user (fildes, fd, 2*sizeof (int)))
-                        error = -EFAULT;
-        }
-        return error;
-}
-
 static inline unsigned long
 do_mmap2 (unsigned long addr, size_t len,
          unsigned long prot, unsigned long flags,
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index c3f880902d66..bbcafaa160c0 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -18,6 +18,7 @@ config X86_64
 ### Arch settings
 config X86
         def_bool y
+        select HAVE_UNSTABLE_SCHED_CLOCK
         select HAVE_IDE
         select HAVE_OPROFILE
         select HAVE_KPROBES
@@ -1661,6 +1662,7 @@ config GEODE_MFGPT_TIMER
 
 config OLPC
         bool "One Laptop Per Child support"
+        depends on MGEODE_LX
         default n
         help
           Add support for detecting the unique features of the OLPC
diff --git a/arch/x86/boot/compressed/relocs.c b/arch/x86/boot/compressed/relocs.c
index d01ea42187e6..edaadea90aaf 100644
--- a/arch/x86/boot/compressed/relocs.c
+++ b/arch/x86/boot/compressed/relocs.c
@@ -191,7 +191,7 @@ static void read_ehdr(FILE *fp)
                 die("Cannot read ELF header: %s\n",
                         strerror(errno));
         }
-        if (memcmp(ehdr.e_ident, ELFMAG, 4) != 0) {
+        if (memcmp(ehdr.e_ident, ELFMAG, SELFMAG) != 0) {
                 die("No ELF magic\n");
         }
         if (ehdr.e_ident[EI_CLASS] != ELFCLASS32) {
diff --git a/arch/x86/kernel/acpi/Makefile b/arch/x86/kernel/acpi/Makefile
index 7335959b6aff..fd5ca97a2ad5 100644
--- a/arch/x86/kernel/acpi/Makefile
+++ b/arch/x86/kernel/acpi/Makefile
@@ -10,5 +10,5 @@ endif
 $(obj)/wakeup_rm.o:    $(obj)/realmode/wakeup.bin
 
 $(obj)/realmode/wakeup.bin: FORCE
-        $(Q)$(MAKE) $(build)=$(obj)/realmode $@
+        $(Q)$(MAKE) $(build)=$(obj)/realmode
 
diff --git a/arch/x86/kernel/acpi/realmode/Makefile b/arch/x86/kernel/acpi/realmode/Makefile
index 092900854acc..1c31cc0e9def 100644
--- a/arch/x86/kernel/acpi/realmode/Makefile
+++ b/arch/x86/kernel/acpi/realmode/Makefile
@@ -6,7 +6,8 @@
 # for more details.
 #
 
-targets         := wakeup.bin wakeup.elf
+always          := wakeup.bin
+targets         := wakeup.elf wakeup.lds
 
 wakeup-y        += wakeup.o wakemain.o video-mode.o copy.o
 
@@ -48,7 +49,7 @@ LDFLAGS_wakeup.elf	:= -T
 
 CPPFLAGS_wakeup.lds += -P -C
 
-$(obj)/wakeup.elf: $(src)/wakeup.lds $(WAKEUP_OBJS) FORCE
+$(obj)/wakeup.elf: $(obj)/wakeup.lds $(WAKEUP_OBJS) FORCE
         $(call if_changed,ld)
 
 OBJCOPYFLAGS_wakeup.bin := -O binary
diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c
index ddee04043aeb..4bc1be5d5472 100644
--- a/arch/x86/kernel/kvmclock.c
+++ b/arch/x86/kernel/kvmclock.c
@@ -133,6 +133,7 @@ static int kvm_register_clock(void)
         return native_write_msr_safe(MSR_KVM_SYSTEM_TIME, low, high);
 }
 
+#ifdef CONFIG_X86_LOCAL_APIC
 static void kvm_setup_secondary_clock(void)
 {
         /*
@@ -143,6 +144,7 @@ static void kvm_setup_secondary_clock(void)
         /* ok, done with our trickery, call native */
         setup_secondary_APIC_clock();
 }
+#endif
 
 /*
  * After the clock is registered, the host will keep writing to the
@@ -177,7 +179,9 @@ void __init kvmclock_init(void)
                 pv_time_ops.get_wallclock = kvm_get_wallclock;
                 pv_time_ops.set_wallclock = kvm_set_wallclock;
                 pv_time_ops.sched_clock = kvm_clock_read;
+#ifdef CONFIG_X86_LOCAL_APIC
                 pv_apic_ops.setup_secondary_clock = kvm_setup_secondary_clock;
+#endif
                 machine_ops.shutdown  = kvm_shutdown;
 #ifdef CONFIG_KEXEC
                 machine_ops.crash_shutdown  = kvm_crash_shutdown;
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index 3e2c54dc8b29..404683b94e79 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -794,6 +794,11 @@ void __init find_smp_config(void)
                             ACPI-based MP Configuration
    -------------------------------------------------------------------------- */
 
+/*
+ * Keep this outside and initialized to 0, for !CONFIG_ACPI builds:
+ */
+int es7000_plat;
+
 #ifdef CONFIG_ACPI
 
 #ifdef  CONFIG_X86_IO_APIC
@@ -909,8 +914,6 @@ void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi)
         MP_intsrc_info(&intsrc);
 }
 
-int es7000_plat;
-
 void __init mp_config_acpi_legacy_irqs(void)
 {
         struct mpc_config_intsrc intsrc;
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index 07c6d42ab5ff..f6be7d5f82f8 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -149,7 +149,6 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = {
                 .matches = {
                         DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
                         DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 745"),
-                        DMI_MATCH(DMI_BOARD_NAME, "0WF810"),
                 },
         },
         {       /* Handle problems with rebooting on Dell Optiplex 745's DFF*/
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index c0c68c18a788..cc6f5eb20b24 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -95,7 +95,7 @@ void __init setup_per_cpu_areas(void)
 
         /* Copy section for each CPU (we discard the original) */
         size = PERCPU_ENOUGH_ROOM;
-        printk(KERN_INFO "PERCPU: Allocating %lu bytes of per cpu data\n",
+        printk(KERN_INFO "PERCPU: Allocating %zd bytes of per cpu data\n",
                           size);
 
         for_each_possible_cpu(i) {
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 84241a256dc8..6b087ab6cd8f 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -299,7 +299,7 @@ static void __cpuinit smp_callin(void)
 /*
  * Activate a secondary processor.
  */
-void __cpuinit start_secondary(void *unused)
+static void __cpuinit start_secondary(void *unused)
 {
         /*
          * Don't put *anything* before cpu_init(), SMP booting is too
@@ -1306,7 +1306,7 @@ static void remove_siblinginfo(int cpu)
         cpu_clear(cpu, cpu_sibling_setup_map);
 }
 
-int additional_cpus __initdata = -1;
+static int additional_cpus __initdata = -1;
 
 static __init int setup_additional_cpus(char *s)
 {
diff --git a/arch/x86/kernel/sys_i386_32.c b/arch/x86/kernel/sys_i386_32.c
index a86d26f036e1..d2ab52cc1d6b 100644
--- a/arch/x86/kernel/sys_i386_32.c
+++ b/arch/x86/kernel/sys_i386_32.c
@@ -22,23 +22,6 @@
 #include <asm/uaccess.h>
 #include <asm/unistd.h>
 
-/*
- * sys_pipe() is the normal C calling standard for creating
- * a pipe. It's not the way Unix traditionally does this, though.
- */
-asmlinkage int sys_pipe(unsigned long __user * fildes)
-{
-        int fd[2];
-        int error;
-
-        error = do_pipe(fd);
-        if (!error) {
-                if (copy_to_user(fildes, fd, 2*sizeof(int)))
-                        error = -EFAULT;
-        }
-        return error;
-}
-
 asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
                           unsigned long prot, unsigned long flags,
                           unsigned long fd, unsigned long pgoff)
diff --git a/arch/x86/kernel/sys_x86_64.c b/arch/x86/kernel/sys_x86_64.c
index bd802a5e1aa3..3b360ef33817 100644
--- a/arch/x86/kernel/sys_x86_64.c
+++ b/arch/x86/kernel/sys_x86_64.c
@@ -17,23 +17,6 @@
 #include <asm/uaccess.h>
 #include <asm/ia32.h>
 
-/*
- * sys_pipe() is the normal C calling standard for creating
- * a pipe. It's not the way Unix traditionally does this, though.
- */
-asmlinkage long sys_pipe(int __user *fildes)
-{
-        int fd[2];
-        int error;
-
-        error = do_pipe(fd);
-        if (!error) {
-                if (copy_to_user(fildes, fd, 2*sizeof(int)))
-                        error = -EFAULT;
-        }
-        return error;
-}
-
 asmlinkage long sys_mmap(unsigned long addr, unsigned long len, unsigned long prot, unsigned long flags,
         unsigned long fd, unsigned long off)
 {
diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c
index 361e31611276..3324d90038e4 100644
--- a/arch/x86/kvm/i8254.c
+++ b/arch/x86/kvm/i8254.c
@@ -35,7 +35,7 @@
 #include "i8254.h"
 
 #ifndef CONFIG_X86_64
-#define mod_64(x, y) ((x) - (y) * div64_64(x, y))
+#define mod_64(x, y) ((x) - (y) * div64_u64(x, y))
 #else
 #define mod_64(x, y) ((x) % (y))
 #endif
@@ -60,8 +60,8 @@ static u64 muldiv64(u64 a, u32 b, u32 c)
         rl = (u64)u.l.low * (u64)b;
         rh = (u64)u.l.high * (u64)b;
         rh += (rl >> 32);
-        res.l.high = div64_64(rh, c);
-        res.l.low = div64_64(((mod_64(rh, c) << 32) + (rl & 0xffffffff)), c);
+        res.l.high = div64_u64(rh, c);
+        res.l.low = div64_u64(((mod_64(rh, c) << 32) + (rl & 0xffffffff)), c);
         return res.ll;
 }
 
@@ -288,6 +288,8 @@ static void pit_load_count(struct kvm *kvm, int channel, u32 val)
          * mode 1 is one shot, mode 2 is period, otherwise del timer */
         switch (ps->channels[0].mode) {
         case 1:
+        /* FIXME: enhance mode 4 precision */
+        case 4:
                 create_pit_timer(&ps->pit_timer, val, 0);
                 break;
         case 2:
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index 57ac4e4c556a..36809d79788b 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -25,13 +25,13 @@
 #include <linux/hrtimer.h>
 #include <linux/io.h>
 #include <linux/module.h>
+#include <linux/math64.h>
 #include <asm/processor.h>
 #include <asm/msr.h>
 #include <asm/page.h>
 #include <asm/current.h>
 #include <asm/apicdef.h>
 #include <asm/atomic.h>
-#include <asm/div64.h>
 #include "irq.h"
 
 #define PRId64 "d"
@@ -526,8 +526,8 @@ static u32 apic_get_tmcct(struct kvm_lapic *apic)
         } else
                 passed = ktime_sub(now, apic->timer.last_update);
 
-        counter_passed = div64_64(ktime_to_ns(passed),
-                                  (APIC_BUS_CYCLE_NS * apic->timer.divide_count));
+        counter_passed = div64_u64(ktime_to_ns(passed),
+                                   (APIC_BUS_CYCLE_NS * apic->timer.divide_count));
 
         if (counter_passed > tmcct) {
                 if (unlikely(!apic_lvtt_period(apic))) {
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 2ad6f5481671..36c5406b1813 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -79,36 +79,6 @@ static int dbg = 1;
         }
 #endif
 
-#define PT64_PT_BITS 9
-#define PT64_ENT_PER_PAGE (1 << PT64_PT_BITS)
-#define PT32_PT_BITS 10
-#define PT32_ENT_PER_PAGE (1 << PT32_PT_BITS)
-
-#define PT_WRITABLE_SHIFT 1
-
-#define PT_PRESENT_MASK (1ULL << 0)
-#define PT_WRITABLE_MASK (1ULL << PT_WRITABLE_SHIFT)
-#define PT_USER_MASK (1ULL << 2)
-#define PT_PWT_MASK (1ULL << 3)
-#define PT_PCD_MASK (1ULL << 4)
-#define PT_ACCESSED_MASK (1ULL << 5)
-#define PT_DIRTY_MASK (1ULL << 6)
-#define PT_PAGE_SIZE_MASK (1ULL << 7)
-#define PT_PAT_MASK (1ULL << 7)
-#define PT_GLOBAL_MASK (1ULL << 8)
-#define PT64_NX_SHIFT 63
-#define PT64_NX_MASK (1ULL << PT64_NX_SHIFT)
-
-#define PT_PAT_SHIFT 7
-#define PT_DIR_PAT_SHIFT 12
-#define PT_DIR_PAT_MASK (1ULL << PT_DIR_PAT_SHIFT)
-
-#define PT32_DIR_PSE36_SIZE 4
-#define PT32_DIR_PSE36_SHIFT 13
-#define PT32_DIR_PSE36_MASK \
-        (((1ULL << PT32_DIR_PSE36_SIZE) - 1) << PT32_DIR_PSE36_SHIFT)
-
-
 #define PT_FIRST_AVAIL_BITS_SHIFT 9
 #define PT64_SECOND_AVAIL_BITS_SHIFT 52
 
@@ -154,10 +124,6 @@ static int dbg = 1;
 #define PFERR_USER_MASK (1U << 2)
 #define PFERR_FETCH_MASK (1U << 4)
 
-#define PT64_ROOT_LEVEL 4
-#define PT32_ROOT_LEVEL 2
-#define PT32E_ROOT_LEVEL 3
-
 #define PT_DIRECTORY_LEVEL 2
 #define PT_PAGE_TABLE_LEVEL 1
 
@@ -186,6 +152,12 @@ static struct kmem_cache *mmu_page_header_cache;
 
 static u64 __read_mostly shadow_trap_nonpresent_pte;
 static u64 __read_mostly shadow_notrap_nonpresent_pte;
+static u64 __read_mostly shadow_base_present_pte;
+static u64 __read_mostly shadow_nx_mask;
+static u64 __read_mostly shadow_x_mask; /* mutual exclusive with nx_mask */
+static u64 __read_mostly shadow_user_mask;
+static u64 __read_mostly shadow_accessed_mask;
+static u64 __read_mostly shadow_dirty_mask;
 
 void kvm_mmu_set_nonpresent_ptes(u64 trap_pte, u64 notrap_pte)
 {
@@ -194,6 +166,23 @@ void kvm_mmu_set_nonpresent_ptes(u64 trap_pte, u64 notrap_pte)
 }
 EXPORT_SYMBOL_GPL(kvm_mmu_set_nonpresent_ptes);
 
+void kvm_mmu_set_base_ptes(u64 base_pte)
+{
+        shadow_base_present_pte = base_pte;
+}
+EXPORT_SYMBOL_GPL(kvm_mmu_set_base_ptes);
+
+void kvm_mmu_set_mask_ptes(u64 user_mask, u64 accessed_mask,
+                u64 dirty_mask, u64 nx_mask, u64 x_mask)
+{
+        shadow_user_mask = user_mask;
+        shadow_accessed_mask = accessed_mask;
+        shadow_dirty_mask = dirty_mask;
+        shadow_nx_mask = nx_mask;
+        shadow_x_mask = x_mask;
+}
+EXPORT_SYMBOL_GPL(kvm_mmu_set_mask_ptes);
+
 static int is_write_protection(struct kvm_vcpu *vcpu)
 {
         return vcpu->arch.cr0 & X86_CR0_WP;
@@ -232,7 +221,7 @@ static int is_writeble_pte(unsigned long pte)
 
 static int is_dirty_pte(unsigned long pte)
 {
-        return pte & PT_DIRTY_MASK;
+        return pte & shadow_dirty_mask;
 }
 
 static int is_rmap_pte(u64 pte)
@@ -387,7 +376,6 @@ static void account_shadowed(struct kvm *kvm, gfn_t gfn)
 
         write_count = slot_largepage_idx(gfn, gfn_to_memslot(kvm, gfn));
         *write_count += 1;
-        WARN_ON(*write_count > KVM_PAGES_PER_HPAGE);
 }
 
 static void unaccount_shadowed(struct kvm *kvm, gfn_t gfn)
@@ -547,7 +535,7 @@ static void rmap_remove(struct kvm *kvm, u64 *spte)
                 return;
         sp = page_header(__pa(spte));
         pfn = spte_to_pfn(*spte);
-        if (*spte & PT_ACCESSED_MASK)
+        if (*spte & shadow_accessed_mask)
                 kvm_set_pfn_accessed(pfn);
         if (is_writeble_pte(*spte))
                 kvm_release_pfn_dirty(pfn);
@@ -1073,17 +1061,17 @@ static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *shadow_pte,
          * whether the guest actually used the pte (in order to detect
          * demand paging).
          */
-        spte = PT_PRESENT_MASK | PT_DIRTY_MASK;
+        spte = shadow_base_present_pte | shadow_dirty_mask;
         if (!speculative)
                 pte_access |= PT_ACCESSED_MASK;
         if (!dirty)
                 pte_access &= ~ACC_WRITE_MASK;
-        if (!(pte_access & ACC_EXEC_MASK))
-                spte |= PT64_NX_MASK;
-
-        spte |= PT_PRESENT_MASK;
+        if (pte_access & ACC_EXEC_MASK)
+                spte |= shadow_x_mask;
+        else
+                spte |= shadow_nx_mask;
         if (pte_access & ACC_USER_MASK)
-                spte |= PT_USER_MASK;
+                spte |= shadow_user_mask;
         if (largepage)
                 spte |= PT_PAGE_SIZE_MASK;
 
@@ -1188,8 +1176,9 @@ static int __direct_map(struct kvm_vcpu *vcpu, gpa_t v, int write,
                                 return -ENOMEM;
                         }
 
-                        table[index] = __pa(new_table->spt) | PT_PRESENT_MASK
-                                | PT_WRITABLE_MASK | PT_USER_MASK;
+                        table[index] = __pa(new_table->spt)
+                                | PT_PRESENT_MASK | PT_WRITABLE_MASK
+                                | shadow_user_mask | shadow_x_mask;
                 }
                 table_addr = table[index] & PT64_BASE_ADDR_MASK;
         }
@@ -1244,7 +1233,6 @@ static void mmu_free_roots(struct kvm_vcpu *vcpu)
         if (!VALID_PAGE(vcpu->arch.mmu.root_hpa))
                 return;
         spin_lock(&vcpu->kvm->mmu_lock);
-#ifdef CONFIG_X86_64
         if (vcpu->arch.mmu.shadow_root_level == PT64_ROOT_LEVEL) {
                 hpa_t root = vcpu->arch.mmu.root_hpa;
 
@@ -1256,7 +1244,6 @@ static void mmu_free_roots(struct kvm_vcpu *vcpu)
                 spin_unlock(&vcpu->kvm->mmu_lock);
                 return;
         }
-#endif
         for (i = 0; i < 4; ++i) {
                 hpa_t root = vcpu->arch.mmu.pae_root[i];
 
@@ -1282,7 +1269,6 @@ static void mmu_alloc_roots(struct kvm_vcpu *vcpu)
 
         root_gfn = vcpu->arch.cr3 >> PAGE_SHIFT;
 
-#ifdef CONFIG_X86_64
         if (vcpu->arch.mmu.shadow_root_level == PT64_ROOT_LEVEL) {
                 hpa_t root = vcpu->arch.mmu.root_hpa;
 
@@ -1297,7 +1283,6 @@ static void mmu_alloc_roots(struct kvm_vcpu *vcpu)
                 vcpu->arch.mmu.root_hpa = root;
                 return;
         }
-#endif
         metaphysical = !is_paging(vcpu);
         if (tdp_enabled)
                 metaphysical = 1;
@@ -1377,7 +1362,7 @@ static int tdp_page_fault(struct kvm_vcpu *vcpu, gva_t gpa,
         spin_lock(&vcpu->kvm->mmu_lock);
         kvm_mmu_free_some_pages(vcpu);
         r = __direct_map(vcpu, gpa, error_code & PFERR_WRITE_MASK,
-                         largepage, gfn, pfn, TDP_ROOT_LEVEL);
+                         largepage, gfn, pfn, kvm_x86_ops->get_tdp_level());
         spin_unlock(&vcpu->kvm->mmu_lock);
 
         return r;
@@ -1484,7 +1469,7 @@ static int init_kvm_tdp_mmu(struct kvm_vcpu *vcpu)
         context->page_fault = tdp_page_fault;
         context->free = nonpaging_free;
         context->prefetch_page = nonpaging_prefetch_page;
-        context->shadow_root_level = TDP_ROOT_LEVEL;
+        context->shadow_root_level = kvm_x86_ops->get_tdp_level();
         context->root_hpa = INVALID_PAGE;
 
         if (!is_paging(vcpu)) {
@@ -1633,7 +1618,7 @@ static bool last_updated_pte_accessed(struct kvm_vcpu *vcpu)
 {
         u64 *spte = vcpu->arch.last_pte_updated;
 
-        return !!(spte && (*spte & PT_ACCESSED_MASK));
+        return !!(spte && (*spte & shadow_accessed_mask));
 }
 
 static void mmu_guess_page_from_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa,
diff --git a/arch/x86/kvm/mmu.h b/arch/x86/kvm/mmu.h
index e64e9f56a65e..1730757bbc7a 100644
--- a/arch/x86/kvm/mmu.h
+++ b/arch/x86/kvm/mmu.h
@@ -3,11 +3,38 @@
 
 #include <linux/kvm_host.h>
 
-#ifdef CONFIG_X86_64
-#define TDP_ROOT_LEVEL PT64_ROOT_LEVEL
-#else
-#define TDP_ROOT_LEVEL PT32E_ROOT_LEVEL
-#endif
+#define PT64_PT_BITS 9
+#define PT64_ENT_PER_PAGE (1 << PT64_PT_BITS)
+#define PT32_PT_BITS 10
+#define PT32_ENT_PER_PAGE (1 << PT32_PT_BITS)
+
+#define PT_WRITABLE_SHIFT 1
+
+#define PT_PRESENT_MASK (1ULL << 0)
+#define PT_WRITABLE_MASK (1ULL << PT_WRITABLE_SHIFT)
+#define PT_USER_MASK (1ULL << 2)
+#define PT_PWT_MASK (1ULL << 3)
+#define PT_PCD_MASK (1ULL << 4)
+#define PT_ACCESSED_MASK (1ULL << 5)
+#define PT_DIRTY_MASK (1ULL << 6)
+#define PT_PAGE_SIZE_MASK (1ULL << 7)
+#define PT_PAT_MASK (1ULL << 7)
+#define PT_GLOBAL_MASK (1ULL << 8)
+#define PT64_NX_SHIFT 63
+#define PT64_NX_MASK (1ULL << PT64_NX_SHIFT)
+
+#define PT_PAT_SHIFT 7
+#define PT_DIR_PAT_SHIFT 12
+#define PT_DIR_PAT_MASK (1ULL << PT_DIR_PAT_SHIFT)
+
+#define PT32_DIR_PSE36_SIZE 4
+#define PT32_DIR_PSE36_SHIFT 13
+#define PT32_DIR_PSE36_MASK \
+        (((1ULL << PT32_DIR_PSE36_SIZE) - 1) << PT32_DIR_PSE36_SHIFT)
+
+#define PT64_ROOT_LEVEL 4
+#define PT32_ROOT_LEVEL 2
+#define PT32E_ROOT_LEVEL 3
 
 static inline void kvm_mmu_free_some_pages(struct kvm_vcpu *vcpu)
 {
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 89e0be2c10d0..ab22615eee89 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -1863,6 +1863,15 @@ static bool svm_cpu_has_accelerated_tpr(void)
         return false;
 }
 
+static int get_npt_level(void)
+{
+#ifdef CONFIG_X86_64
+        return PT64_ROOT_LEVEL;
+#else
+        return PT32E_ROOT_LEVEL;
+#endif
+}
+
 static struct kvm_x86_ops svm_x86_ops = {
         .cpu_has_kvm_support = has_svm,
         .disabled_by_bios = is_disabled,
@@ -1920,6 +1929,7 @@ static struct kvm_x86_ops svm_x86_ops = {
         .inject_pending_vectors = do_interrupt_requests,
 
         .set_tss_addr = svm_set_tss_addr,
+        .get_tdp_level = get_npt_level,
 };
 
 static int __init svm_init(void)
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 8e5d6645b90d..bfe4db11989c 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -42,6 +42,9 @@ module_param(enable_vpid, bool, 0);
 static int flexpriority_enabled = 1;
 module_param(flexpriority_enabled, bool, 0);
 
+static int enable_ept = 1;
+module_param(enable_ept, bool, 0);
+
 struct vmcs {
         u32 revision_id;
         u32 abort;
@@ -84,7 +87,7 @@ static inline struct vcpu_vmx *to_vmx(struct kvm_vcpu *vcpu)
         return container_of(vcpu, struct vcpu_vmx, vcpu);
 }
 
-static int init_rmode_tss(struct kvm *kvm);
+static int init_rmode(struct kvm *kvm);
 
 static DEFINE_PER_CPU(struct vmcs *, vmxarea);
 static DEFINE_PER_CPU(struct vmcs *, current_vmcs);
@@ -107,6 +110,11 @@ static struct vmcs_config {
         u32 vmentry_ctrl;
 } vmcs_config;
 
+struct vmx_capability {
+        u32 ept;
+        u32 vpid;
+} vmx_capability;
+
 #define VMX_SEGMENT_FIELD(seg)                                  \
         [VCPU_SREG_##seg] = {                                   \
                 .selector = GUEST_##seg##_SELECTOR,             \
@@ -214,6 +222,32 @@ static inline bool cpu_has_vmx_virtualize_apic_accesses(void)
                     SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES);
 }
 
+static inline int cpu_has_vmx_invept_individual_addr(void)
+{
+        return (!!(vmx_capability.ept & VMX_EPT_EXTENT_INDIVIDUAL_BIT));
+}
+
+static inline int cpu_has_vmx_invept_context(void)
+{
+        return (!!(vmx_capability.ept & VMX_EPT_EXTENT_CONTEXT_BIT));
+}
+
+static inline int cpu_has_vmx_invept_global(void)
+{
+        return (!!(vmx_capability.ept & VMX_EPT_EXTENT_GLOBAL_BIT));
+}
+
+static inline int cpu_has_vmx_ept(void)
+{
+        return (vmcs_config.cpu_based_2nd_exec_ctrl &
+                SECONDARY_EXEC_ENABLE_EPT);
+}
+
+static inline int vm_need_ept(void)
+{
+        return (cpu_has_vmx_ept() && enable_ept);
+}
+
 static inline int vm_need_virtualize_apic_accesses(struct kvm *kvm)
 {
         return ((cpu_has_vmx_virtualize_apic_accesses()) &&
@@ -250,6 +284,18 @@ static inline void __invvpid(int ext, u16 vpid, gva_t gva)
                   : : "a"(&operand), "c"(ext) : "cc", "memory");
 }
 
+static inline void __invept(int ext, u64 eptp, gpa_t gpa)
+{
+        struct {
+                u64 eptp, gpa;
+        } operand = {eptp, gpa};
+
+        asm volatile (ASM_VMX_INVEPT
+                        /* CF==1 or ZF==1 --> rc = -1 */
+                        "; ja 1f ; ud2 ; 1:\n"
+                        : : "a" (&operand), "c" (ext) : "cc", "memory");
+}
+
 static struct kvm_msr_entry *find_msr_entry(struct vcpu_vmx *vmx, u32 msr)
 {
         int i;
@@ -301,6 +347,33 @@ static inline void vpid_sync_vcpu_all(struct vcpu_vmx *vmx)
         __invvpid(VMX_VPID_EXTENT_SINGLE_CONTEXT, vmx->vpid, 0);
 }
 
+static inline void ept_sync_global(void)
+{
+        if (cpu_has_vmx_invept_global())
+                __invept(VMX_EPT_EXTENT_GLOBAL, 0, 0);
+}
+
+static inline void ept_sync_context(u64 eptp)
+{
+        if (vm_need_ept()) {
+                if (cpu_has_vmx_invept_context())
+                        __invept(VMX_EPT_EXTENT_CONTEXT, eptp, 0);
+                else
+                        ept_sync_global();
+        }
+}
+
+static inline void ept_sync_individual_addr(u64 eptp, gpa_t gpa)
+{
+        if (vm_need_ept()) {
+                if (cpu_has_vmx_invept_individual_addr())
+                        __invept(VMX_EPT_EXTENT_INDIVIDUAL_ADDR,
+                                        eptp, gpa);
+                else
+                        ept_sync_context(eptp);
+        }
+}
+
 static unsigned long vmcs_readl(unsigned long field)
 {
         unsigned long value;
@@ -388,6 +461,8 @@ static void update_exception_bitmap(struct kvm_vcpu *vcpu)
                 eb |= 1u << 1;
         if (vcpu->arch.rmode.active)
                 eb = ~0;
+        if (vm_need_ept())
+                eb &= ~(1u << PF_VECTOR); /* bypass_guest_pf = 0 */
         vmcs_write32(EXCEPTION_BITMAP, eb);
 }
 
@@ -985,7 +1060,7 @@ static __init int adjust_vmx_controls(u32 ctl_min, u32 ctl_opt,
 static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf)
 {
         u32 vmx_msr_low, vmx_msr_high;
-        u32 min, opt;
+        u32 min, opt, min2, opt2;
         u32 _pin_based_exec_control = 0;
         u32 _cpu_based_exec_control = 0;
         u32 _cpu_based_2nd_exec_control = 0;
@@ -1003,6 +1078,8 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf)
               CPU_BASED_CR8_LOAD_EXITING |
               CPU_BASED_CR8_STORE_EXITING |
 #endif
+              CPU_BASED_CR3_LOAD_EXITING |
+              CPU_BASED_CR3_STORE_EXITING |
               CPU_BASED_USE_IO_BITMAPS |
               CPU_BASED_MOV_DR_EXITING |
               CPU_BASED_USE_TSC_OFFSETING;
@@ -1018,11 +1095,13 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf)
                                            ~CPU_BASED_CR8_STORE_EXITING;
 #endif
         if (_cpu_based_exec_control & CPU_BASED_ACTIVATE_SECONDARY_CONTROLS) {
-                min = 0;
-                opt = SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES |
+                min2 = 0;
+                opt2 = SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES |
                         SECONDARY_EXEC_WBINVD_EXITING |
-                        SECONDARY_EXEC_ENABLE_VPID;
-                if (adjust_vmx_controls(min, opt, MSR_IA32_VMX_PROCBASED_CTLS2,
+                        SECONDARY_EXEC_ENABLE_VPID |
+                        SECONDARY_EXEC_ENABLE_EPT;
+                if (adjust_vmx_controls(min2, opt2,
+                                        MSR_IA32_VMX_PROCBASED_CTLS2,
                                         &_cpu_based_2nd_exec_control) < 0)
                         return -EIO;
         }
@@ -1031,6 +1110,16 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf)
                                 SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES))
                 _cpu_based_exec_control &= ~CPU_BASED_TPR_SHADOW;
 #endif
+        if (_cpu_based_2nd_exec_control & SECONDARY_EXEC_ENABLE_EPT) {
+                /* CR3 accesses don't need to cause VM Exits when EPT enabled */
+                min &= ~(CPU_BASED_CR3_LOAD_EXITING |
+                         CPU_BASED_CR3_STORE_EXITING);
+                if (adjust_vmx_controls(min, opt, MSR_IA32_VMX_PROCBASED_CTLS,
+                                        &_cpu_based_exec_control) < 0)
+                        return -EIO;
+                rdmsr(MSR_IA32_VMX_EPT_VPID_CAP,
+                      vmx_capability.ept, vmx_capability.vpid);
+        }
 
         min = 0;
 #ifdef CONFIG_X86_64
@@ -1256,7 +1345,7 @@ static void enter_rmode(struct kvm_vcpu *vcpu)
         fix_rmode_seg(VCPU_SREG_FS, &vcpu->arch.rmode.fs);
 
         kvm_mmu_reset_context(vcpu);
-        init_rmode_tss(vcpu->kvm);
+        init_rmode(vcpu->kvm);
 }
 
 #ifdef CONFIG_X86_64
@@ -1304,8 +1393,64 @@ static void vmx_decache_cr4_guest_bits(struct kvm_vcpu *vcpu)
         vcpu->arch.cr4 |= vmcs_readl(GUEST_CR4) & ~KVM_GUEST_CR4_MASK;
 }
 
+static void ept_load_pdptrs(struct kvm_vcpu *vcpu)
+{
+        if (is_paging(vcpu) && is_pae(vcpu) && !is_long_mode(vcpu)) {
+                if (!load_pdptrs(vcpu, vcpu->arch.cr3)) {
+                        printk(KERN_ERR "EPT: Fail to load pdptrs!\n");
+                        return;
+                }
+                vmcs_write64(GUEST_PDPTR0, vcpu->arch.pdptrs[0]);
+                vmcs_write64(GUEST_PDPTR1, vcpu->arch.pdptrs[1]);
+                vmcs_write64(GUEST_PDPTR2, vcpu->arch.pdptrs[2]);
+                vmcs_write64(GUEST_PDPTR3, vcpu->arch.pdptrs[3]);
+        }
+}
+
+static void vmx_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4);
+
+static void ept_update_paging_mode_cr0(unsigned long *hw_cr0,
+                                        unsigned long cr0,
+                                        struct kvm_vcpu *vcpu)
+{
+        if (!(cr0 & X86_CR0_PG)) {
+                /* From paging/starting to nonpaging */
+                vmcs_write32(CPU_BASED_VM_EXEC_CONTROL,
+                             vmcs_config.cpu_based_exec_ctrl |
+                             (CPU_BASED_CR3_LOAD_EXITING |
+                              CPU_BASED_CR3_STORE_EXITING));
+                vcpu->arch.cr0 = cr0;
+                vmx_set_cr4(vcpu, vcpu->arch.cr4);
+                *hw_cr0 |= X86_CR0_PE | X86_CR0_PG;
+                *hw_cr0 &= ~X86_CR0_WP;
+        } else if (!is_paging(vcpu)) {
+                /* From nonpaging to paging */
+                vmcs_write32(CPU_BASED_VM_EXEC_CONTROL,
+                             vmcs_config.cpu_based_exec_ctrl &
+                             ~(CPU_BASED_CR3_LOAD_EXITING |
+                               CPU_BASED_CR3_STORE_EXITING));
+                vcpu->arch.cr0 = cr0;
+                vmx_set_cr4(vcpu, vcpu->arch.cr4);
+                if (!(vcpu->arch.cr0 & X86_CR0_WP))
+                        *hw_cr0 &= ~X86_CR0_WP;
+        }
+}
+
+static void ept_update_paging_mode_cr4(unsigned long *hw_cr4,
+                                        struct kvm_vcpu *vcpu)
+{
+        if (!is_paging(vcpu)) {
+                *hw_cr4 &= ~X86_CR4_PAE;
+                *hw_cr4 |= X86_CR4_PSE;
+        } else if (!(vcpu->arch.cr4 & X86_CR4_PAE))
+                *hw_cr4 &= ~X86_CR4_PAE;
+}
+
 static void vmx_set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0)
 {
+        unsigned long hw_cr0 = (cr0 & ~KVM_GUEST_CR0_MASK) |
+                                KVM_VM_CR0_ALWAYS_ON;
+
         vmx_fpu_deactivate(vcpu);
 
         if (vcpu->arch.rmode.active && (cr0 & X86_CR0_PE))
@@ -1323,29 +1468,61 @@ static void vmx_set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0)
         }
 #endif
 
+        if (vm_need_ept())
+                ept_update_paging_mode_cr0(&hw_cr0, cr0, vcpu);
+
         vmcs_writel(CR0_READ_SHADOW, cr0);
-        vmcs_writel(GUEST_CR0,
-                    (cr0 & ~KVM_GUEST_CR0_MASK) | KVM_VM_CR0_ALWAYS_ON);
+        vmcs_writel(GUEST_CR0, hw_cr0);
         vcpu->arch.cr0 = cr0;
 
         if (!(cr0 & X86_CR0_TS) || !(cr0 & X86_CR0_PE))
                 vmx_fpu_activate(vcpu);
 }
 
+static u64 construct_eptp(unsigned long root_hpa)
+{
+        u64 eptp;
+
+        /* TODO write the value reading from MSR */
+        eptp = VMX_EPT_DEFAULT_MT |
+                VMX_EPT_DEFAULT_GAW << VMX_EPT_GAW_EPTP_SHIFT;
+        eptp |= (root_hpa & PAGE_MASK);
+
+        return eptp;
+}
+
 static void vmx_set_cr3(struct kvm_vcpu *vcpu, unsigned long cr3)
 {
+        unsigned long guest_cr3;
+        u64 eptp;
+
+        guest_cr3 = cr3;
+        if (vm_need_ept()) {
+                eptp = construct_eptp(cr3);
+                vmcs_write64(EPT_POINTER, eptp);
+                ept_sync_context(eptp);
+                ept_load_pdptrs(vcpu);
+                guest_cr3 = is_paging(vcpu) ? vcpu->arch.cr3 :
+                        VMX_EPT_IDENTITY_PAGETABLE_ADDR;
+        }
+
         vmx_flush_tlb(vcpu);
-        vmcs_writel(GUEST_CR3, cr3);
+        vmcs_writel(GUEST_CR3, guest_cr3);
         if (vcpu->arch.cr0 & X86_CR0_PE)
                 vmx_fpu_deactivate(vcpu);
 }
 
 static void vmx_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4)
 {
-        vmcs_writel(CR4_READ_SHADOW, cr4);
-        vmcs_writel(GUEST_CR4, cr4 | (vcpu->arch.rmode.active ?
-                    KVM_RMODE_VM_CR4_ALWAYS_ON : KVM_PMODE_VM_CR4_ALWAYS_ON));
+        unsigned long hw_cr4 = cr4 | (vcpu->arch.rmode.active ?
+                    KVM_RMODE_VM_CR4_ALWAYS_ON : KVM_PMODE_VM_CR4_ALWAYS_ON);
+
         vcpu->arch.cr4 = cr4;
+        if (vm_need_ept())
+                ept_update_paging_mode_cr4(&hw_cr4, vcpu);
+
+        vmcs_writel(CR4_READ_SHADOW, cr4);
+        vmcs_writel(GUEST_CR4, hw_cr4);
 }
 
 static void vmx_set_efer(struct kvm_vcpu *vcpu, u64 efer)
@@ -1530,6 +1707,41 @@ out:
         return ret;
 }
 
+static int init_rmode_identity_map(struct kvm *kvm)
+{
+        int i, r, ret;
+        pfn_t identity_map_pfn;
+        u32 tmp;
+
+        if (!vm_need_ept())
+                return 1;
+        if (unlikely(!kvm->arch.ept_identity_pagetable)) {
+                printk(KERN_ERR "EPT: identity-mapping pagetable "
+                        "haven't been allocated!\n");
+                return 0;
+        }
+        if (likely(kvm->arch.ept_identity_pagetable_done))
+                return 1;
+        ret = 0;
+        identity_map_pfn = VMX_EPT_IDENTITY_PAGETABLE_ADDR >> PAGE_SHIFT;
+        r = kvm_clear_guest_page(kvm, identity_map_pfn, 0, PAGE_SIZE);
+        if (r < 0)
+                goto out;
+        /* Set up identity-mapping pagetable for EPT in real mode */
+        for (i = 0; i < PT32_ENT_PER_PAGE; i++) {
+                tmp = (i << 22) + (_PAGE_PRESENT | _PAGE_RW | _PAGE_USER |
+                        _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_PSE);
+                r = kvm_write_guest_page(kvm, identity_map_pfn,
+                                &tmp, i * sizeof(tmp), sizeof(tmp));
+                if (r < 0)
+                        goto out;
+        }
+        kvm->arch.ept_identity_pagetable_done = true;
+        ret = 1;
+out:
+        return ret;
+}
+
 static void seg_setup(int seg)
 {
         struct kvm_vmx_segment_field *sf = &kvm_vmx_segment_fields[seg];
@@ -1564,6 +1776,31 @@ out:
         return r;
 }
 
+static int alloc_identity_pagetable(struct kvm *kvm)
+{
+        struct kvm_userspace_memory_region kvm_userspace_mem;
+        int r = 0;
+
+        down_write(&kvm->slots_lock);
+        if (kvm->arch.ept_identity_pagetable)
+                goto out;
+        kvm_userspace_mem.slot = IDENTITY_PAGETABLE_PRIVATE_MEMSLOT;
+        kvm_userspace_mem.flags = 0;
+        kvm_userspace_mem.guest_phys_addr = VMX_EPT_IDENTITY_PAGETABLE_ADDR;
+        kvm_userspace_mem.memory_size = PAGE_SIZE;
+        r = __kvm_set_memory_region(kvm, &kvm_userspace_mem, 0);
+        if (r)
+                goto out;
+
+        down_read(&current->mm->mmap_sem);
+        kvm->arch.ept_identity_pagetable = gfn_to_page(kvm,
+                        VMX_EPT_IDENTITY_PAGETABLE_ADDR >> PAGE_SHIFT);
+        up_read(&current->mm->mmap_sem);
+out:
+        up_write(&kvm->slots_lock);
+        return r;
+}
+
 static void allocate_vpid(struct vcpu_vmx *vmx)
 {
         int vpid;
@@ -1638,6 +1875,9 @@ static int vmx_vcpu_setup(struct vcpu_vmx *vmx)
                                 CPU_BASED_CR8_LOAD_EXITING;
 #endif
         }
+        if (!vm_need_ept())
+                exec_control |= CPU_BASED_CR3_STORE_EXITING |
+                                CPU_BASED_CR3_LOAD_EXITING;
         vmcs_write32(CPU_BASED_VM_EXEC_CONTROL, exec_control);
 
         if (cpu_has_secondary_exec_ctrls()) {
@@ -1647,6 +1887,8 @@ static int vmx_vcpu_setup(struct vcpu_vmx *vmx)
                                 ~SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES;
                 if (vmx->vpid == 0)
                         exec_control &= ~SECONDARY_EXEC_ENABLE_VPID;
+                if (!vm_need_ept())
+                        exec_control &= ~SECONDARY_EXEC_ENABLE_EPT;
                 vmcs_write32(SECONDARY_VM_EXEC_CONTROL, exec_control);
         }
 
@@ -1722,6 +1964,15 @@ static int vmx_vcpu_setup(struct vcpu_vmx *vmx)
         return 0;
 }
 
+static int init_rmode(struct kvm *kvm)
+{
+        if (!init_rmode_tss(kvm))
+                return 0;
+        if (!init_rmode_identity_map(kvm))
+                return 0;
+        return 1;
+}
+
 static int vmx_vcpu_reset(struct kvm_vcpu *vcpu)
 {
         struct vcpu_vmx *vmx = to_vmx(vcpu);
@@ -1729,7 +1980,7 @@ static int vmx_vcpu_reset(struct kvm_vcpu *vcpu)
         int ret;
 
         down_read(&vcpu->kvm->slots_lock);
-        if (!init_rmode_tss(vmx->vcpu.kvm)) {
+        if (!init_rmode(vmx->vcpu.kvm)) {
                 ret = -ENOMEM;
                 goto out;
         }
@@ -1994,6 +2245,9 @@ static int handle_exception(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
         if (intr_info & INTR_INFO_DELIVER_CODE_MASK)
                 error_code = vmcs_read32(VM_EXIT_INTR_ERROR_CODE);
         if (is_page_fault(intr_info)) {
+                /* EPT won't cause page fault directly */
+                if (vm_need_ept())
+                        BUG();
                 cr2 = vmcs_readl(EXIT_QUALIFICATION);
                 KVMTRACE_3D(PAGE_FAULT, vcpu, error_code, (u32)cr2,
                             (u32)((u64)cr2 >> 32), handler);
@@ -2323,6 +2577,64 @@ static int handle_task_switch(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
         return kvm_task_switch(vcpu, tss_selector, reason);
 }
 
+static int handle_ept_violation(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+{
+        u64 exit_qualification;
+        enum emulation_result er;
+        gpa_t gpa;
+        unsigned long hva;
+        int gla_validity;
+        int r;
+
+        exit_qualification = vmcs_read64(EXIT_QUALIFICATION);
+
+        if (exit_qualification & (1 << 6)) {
+                printk(KERN_ERR "EPT: GPA exceeds GAW!\n");
+                return -ENOTSUPP;
+        }
+
+        gla_validity = (exit_qualification >> 7) & 0x3;
+        if (gla_validity != 0x3 && gla_validity != 0x1 && gla_validity != 0) {
+                printk(KERN_ERR "EPT: Handling EPT violation failed!\n");
+                printk(KERN_ERR "EPT: GPA: 0x%lx, GVA: 0x%lx\n",
+                        (long unsigned int)vmcs_read64(GUEST_PHYSICAL_ADDRESS),
+                        (long unsigned int)vmcs_read64(GUEST_LINEAR_ADDRESS));
+                printk(KERN_ERR "EPT: Exit qualification is 0x%lx\n",
+                        (long unsigned int)exit_qualification);
+                kvm_run->exit_reason = KVM_EXIT_UNKNOWN;
+                kvm_run->hw.hardware_exit_reason = 0;
+                return -ENOTSUPP;
+        }
+
+        gpa = vmcs_read64(GUEST_PHYSICAL_ADDRESS);
+        hva = gfn_to_hva(vcpu->kvm, gpa >> PAGE_SHIFT);
+        if (!kvm_is_error_hva(hva)) {
+                r = kvm_mmu_page_fault(vcpu, gpa & PAGE_MASK, 0);
+                if (r < 0) {
+                        printk(KERN_ERR "EPT: Not enough memory!\n");
+                        return -ENOMEM;
+                }
+                return 1;
+        } else {
+                /* must be MMIO */
+                er = emulate_instruction(vcpu, kvm_run, 0, 0, 0);
+
+                if (er == EMULATE_FAIL) {
+                        printk(KERN_ERR
+                         "EPT: Fail to handle EPT violation vmexit!er is %d\n",
+                         er);
+                        printk(KERN_ERR "EPT: GPA: 0x%lx, GVA: 0x%lx\n",
+                         (long unsigned int)vmcs_read64(GUEST_PHYSICAL_ADDRESS),
+                         (long unsigned int)vmcs_read64(GUEST_LINEAR_ADDRESS));
+                        printk(KERN_ERR "EPT: Exit qualification is 0x%lx\n",
+                                (long unsigned int)exit_qualification);
+                        return -ENOTSUPP;
+                } else if (er == EMULATE_DO_MMIO)
+                        return 0;
+        }
+        return 1;
+}
+
 /*
  * The exit handlers return 1 if the exit was handled fully and guest execution
  * may resume.  Otherwise they set the kvm_run parameter to indicate what needs
@@ -2346,6 +2658,7 @@ static int (*kvm_vmx_exit_handlers[])(struct kvm_vcpu *vcpu,
         [EXIT_REASON_APIC_ACCESS]             = handle_apic_access,
         [EXIT_REASON_WBINVD]                  = handle_wbinvd,
         [EXIT_REASON_TASK_SWITCH]             = handle_task_switch,
+        [EXIT_REASON_EPT_VIOLATION]           = handle_ept_violation,
 };
 
 static const int kvm_vmx_max_exit_handlers =
@@ -2364,6 +2677,13 @@ static int kvm_handle_exit(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
         KVMTRACE_3D(VMEXIT, vcpu, exit_reason, (u32)vmcs_readl(GUEST_RIP),
                     (u32)((u64)vmcs_readl(GUEST_RIP) >> 32), entryexit);
 
+        /* Access CR3 don't cause VMExit in paging mode, so we need
+         * to sync with guest real CR3. */
+        if (vm_need_ept() && is_paging(vcpu)) {
+                vcpu->arch.cr3 = vmcs_readl(GUEST_CR3);
+                ept_load_pdptrs(vcpu);
+        }
+
         if (unlikely(vmx->fail)) {
                 kvm_run->exit_reason = KVM_EXIT_FAIL_ENTRY;
                 kvm_run->fail_entry.hardware_entry_failure_reason
@@ -2372,7 +2692,8 @@ static int kvm_handle_exit(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
         }
 
         if ((vectoring_info & VECTORING_INFO_VALID_MASK) &&
-                                exit_reason != EXIT_REASON_EXCEPTION_NMI)
+                        (exit_reason != EXIT_REASON_EXCEPTION_NMI &&
+                        exit_reason != EXIT_REASON_EPT_VIOLATION))
                 printk(KERN_WARNING "%s: unexpected, valid vectoring info and "
                        "exit reason is 0x%x\n", __func__, exit_reason);
         if (exit_reason < kvm_vmx_max_exit_handlers
@@ -2674,6 +2995,15 @@ static struct kvm_vcpu *vmx_create_vcpu(struct kvm *kvm, unsigned int id)
                 return ERR_PTR(-ENOMEM);
 
         allocate_vpid(vmx);
+        if (id == 0 && vm_need_ept()) {
+                kvm_mmu_set_base_ptes(VMX_EPT_READABLE_MASK |
+                        VMX_EPT_WRITABLE_MASK |
+                        VMX_EPT_DEFAULT_MT << VMX_EPT_MT_EPTE_SHIFT);
+                kvm_mmu_set_mask_ptes(0ull, VMX_EPT_FAKE_ACCESSED_MASK,
+                                VMX_EPT_FAKE_DIRTY_MASK, 0ull,
+                                VMX_EPT_EXECUTABLE_MASK);
+                kvm_enable_tdp();
+        }
 
         err = kvm_vcpu_init(&vmx->vcpu, kvm, id);
         if (err)
@@ -2706,6 +3036,10 @@ static struct kvm_vcpu *vmx_create_vcpu(struct kvm *kvm, unsigned int id)
                 if (alloc_apic_access_page(kvm) != 0)
                         goto free_vmcs;
 
+        if (vm_need_ept())
+                if (alloc_identity_pagetable(kvm) != 0)
+                        goto free_vmcs;
+
         return &vmx->vcpu;
 
 free_vmcs:
@@ -2735,6 +3069,11 @@ static void __init vmx_check_processor_compat(void *rtn)
         }
 }
 
+static int get_ept_level(void)
+{
+        return VMX_EPT_DEFAULT_GAW + 1;
+}
+
 static struct kvm_x86_ops vmx_x86_ops = {
         .cpu_has_kvm_support = cpu_has_kvm_support,
         .disabled_by_bios = vmx_disabled_by_bios,
@@ -2791,6 +3130,7 @@ static struct kvm_x86_ops vmx_x86_ops = {
         .inject_pending_vectors = do_interrupt_requests,
 
         .set_tss_addr = vmx_set_tss_addr,
+        .get_tdp_level = get_ept_level,
 };
 
 static int __init vmx_init(void)
@@ -2843,9 +3183,14 @@ static int __init vmx_init(void)
         vmx_disable_intercept_for_msr(vmx_msr_bitmap, MSR_IA32_SYSENTER_ESP);
         vmx_disable_intercept_for_msr(vmx_msr_bitmap, MSR_IA32_SYSENTER_EIP);
 
+        if (cpu_has_vmx_ept())
+                bypass_guest_pf = 0;
+
         if (bypass_guest_pf)
                 kvm_mmu_set_nonpresent_ptes(~0xffeull, 0ull);
 
+        ept_sync_global();
+
         return 0;
 
 out2:
diff --git a/arch/x86/kvm/vmx.h b/arch/x86/kvm/vmx.h
index 5dff4606b988..79d94c610dfe 100644
--- a/arch/x86/kvm/vmx.h
+++ b/arch/x86/kvm/vmx.h
@@ -35,6 +35,8 @@
 #define CPU_BASED_MWAIT_EXITING                 0x00000400
 #define CPU_BASED_RDPMC_EXITING                 0x00000800
 #define CPU_BASED_RDTSC_EXITING                 0x00001000
+#define CPU_BASED_CR3_LOAD_EXITING              0x00008000
+#define CPU_BASED_CR3_STORE_EXITING             0x00010000
 #define CPU_BASED_CR8_LOAD_EXITING              0x00080000
 #define CPU_BASED_CR8_STORE_EXITING             0x00100000
 #define CPU_BASED_TPR_SHADOW                    0x00200000
@@ -49,6 +51,7 @@
  * Definitions of Secondary Processor-Based VM-Execution Controls.
  */
 #define SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES 0x00000001
+#define SECONDARY_EXEC_ENABLE_EPT               0x00000002
 #define SECONDARY_EXEC_ENABLE_VPID              0x00000020
 #define SECONDARY_EXEC_WBINVD_EXITING           0x00000040
 
@@ -100,10 +103,22 @@ enum vmcs_field {
         VIRTUAL_APIC_PAGE_ADDR_HIGH     = 0x00002013,
         APIC_ACCESS_ADDR                = 0x00002014,
         APIC_ACCESS_ADDR_HIGH           = 0x00002015,
+        EPT_POINTER                     = 0x0000201a,
+        EPT_POINTER_HIGH                = 0x0000201b,
+        GUEST_PHYSICAL_ADDRESS          = 0x00002400,
+        GUEST_PHYSICAL_ADDRESS_HIGH     = 0x00002401,
         VMCS_LINK_POINTER               = 0x00002800,
         VMCS_LINK_POINTER_HIGH          = 0x00002801,
         GUEST_IA32_DEBUGCTL             = 0x00002802,
         GUEST_IA32_DEBUGCTL_HIGH        = 0x00002803,
+        GUEST_PDPTR0                    = 0x0000280a,
+        GUEST_PDPTR0_HIGH               = 0x0000280b,
+        GUEST_PDPTR1                    = 0x0000280c,
+        GUEST_PDPTR1_HIGH               = 0x0000280d,
+        GUEST_PDPTR2                    = 0x0000280e,
+        GUEST_PDPTR2_HIGH               = 0x0000280f,
+        GUEST_PDPTR3                    = 0x00002810,
+        GUEST_PDPTR3_HIGH               = 0x00002811,
         PIN_BASED_VM_EXEC_CONTROL       = 0x00004000,
         CPU_BASED_VM_EXEC_CONTROL       = 0x00004002,
         EXCEPTION_BITMAP                = 0x00004004,
@@ -226,6 +241,8 @@ enum vmcs_field {
 #define EXIT_REASON_MWAIT_INSTRUCTION   36
 #define EXIT_REASON_TPR_BELOW_THRESHOLD 43
 #define EXIT_REASON_APIC_ACCESS         44
+#define EXIT_REASON_EPT_VIOLATION       48
+#define EXIT_REASON_EPT_MISCONFIG       49
 #define EXIT_REASON_WBINVD              54
 
 /*
@@ -316,15 +333,36 @@ enum vmcs_field {
 #define MSR_IA32_VMX_CR4_FIXED1                 0x489
 #define MSR_IA32_VMX_VMCS_ENUM                  0x48a
 #define MSR_IA32_VMX_PROCBASED_CTLS2            0x48b
+#define MSR_IA32_VMX_EPT_VPID_CAP               0x48c
 
 #define MSR_IA32_FEATURE_CONTROL                0x3a
 #define MSR_IA32_FEATURE_CONTROL_LOCKED         0x1
 #define MSR_IA32_FEATURE_CONTROL_VMXON_ENABLED  0x4
 
 #define APIC_ACCESS_PAGE_PRIVATE_MEMSLOT        9
+#define IDENTITY_PAGETABLE_PRIVATE_MEMSLOT      10
 
 #define VMX_NR_VPIDS                            (1 << 16)
 #define VMX_VPID_EXTENT_SINGLE_CONTEXT          1
 #define VMX_VPID_EXTENT_ALL_CONTEXT             2
 
+#define VMX_EPT_EXTENT_INDIVIDUAL_ADDR          0
+#define VMX_EPT_EXTENT_CONTEXT                  1
+#define VMX_EPT_EXTENT_GLOBAL                   2
+#define VMX_EPT_EXTENT_INDIVIDUAL_BIT           (1ull << 24)
+#define VMX_EPT_EXTENT_CONTEXT_BIT              (1ull << 25)
+#define VMX_EPT_EXTENT_GLOBAL_BIT               (1ull << 26)
+#define VMX_EPT_DEFAULT_GAW                     3
+#define VMX_EPT_MAX_GAW                         0x4
+#define VMX_EPT_MT_EPTE_SHIFT                   3
+#define VMX_EPT_GAW_EPTP_SHIFT                  3
+#define VMX_EPT_DEFAULT_MT                      0x6ull
+#define VMX_EPT_READABLE_MASK                   0x1ull
+#define VMX_EPT_WRITABLE_MASK                   0x2ull
+#define VMX_EPT_EXECUTABLE_MASK                 0x4ull
+#define VMX_EPT_FAKE_ACCESSED_MASK              (1ull << 62)
+#define VMX_EPT_FAKE_DIRTY_MASK                 (1ull << 63)
+
+#define VMX_EPT_IDENTITY_PAGETABLE_ADDR         0xfffbc000ul
+
 #endif
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 0ce556372a4d..21338bdb28ff 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -2417,6 +2417,9 @@ int kvm_arch_init(void *opaque)
 
         kvm_x86_ops = ops;
         kvm_mmu_set_nonpresent_ptes(0ull, 0ull);
+        kvm_mmu_set_base_ptes(PT_PRESENT_MASK);
+        kvm_mmu_set_mask_ptes(PT_USER_MASK, PT_ACCESSED_MASK,
+                        PT_DIRTY_MASK, PT64_NX_MASK, 0);
         return 0;
 
 out:
@@ -3019,6 +3022,8 @@ int kvm_arch_vcpu_ioctl_set_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs)
 
         kvm_x86_ops->decache_regs(vcpu);
 
+        vcpu->arch.exception.pending = false;
+
         vcpu_put(vcpu);
 
         return 0;
@@ -3481,7 +3486,7 @@ int kvm_task_switch(struct kvm_vcpu *vcpu, u16 tss_selector, int reason)
         }
 
         if (reason == TASK_SWITCH_IRET || reason == TASK_SWITCH_JMP) {
-                cseg_desc.type &= ~(1 << 8); //clear the B flag
+                cseg_desc.type &= ~(1 << 1); //clear the B flag
                 save_guest_segment_descriptor(vcpu, tr_seg.selector,
                                               &cseg_desc);
         }
@@ -3507,7 +3512,7 @@ int kvm_task_switch(struct kvm_vcpu *vcpu, u16 tss_selector, int reason)
         }
 
         if (reason != TASK_SWITCH_IRET) {
-                nseg_desc.type |= (1 << 8);
+                nseg_desc.type |= (1 << 1);
                 save_guest_segment_descriptor(vcpu, tss_selector,
                                               &nseg_desc);
         }
@@ -3698,10 +3703,19 @@ void fx_init(struct kvm_vcpu *vcpu)
 {
         unsigned after_mxcsr_mask;
 
+        /*
+         * Touch the fpu the first time in non atomic context as if
+         * this is the first fpu instruction the exception handler
+         * will fire before the instruction returns and it'll have to
+         * allocate ram with GFP_KERNEL.
+         */
+        if (!used_math())
+                fx_save(&vcpu->arch.host_fx_image);
+
         /* Initialize guest FPU by resetting ours and saving into guest's */
         preempt_disable();
         fx_save(&vcpu->arch.host_fx_image);
-        fpu_init();
+        fx_finit();
         fx_save(&vcpu->arch.guest_fx_image);
         fx_restore(&vcpu->arch.host_fx_image);
         preempt_enable();
@@ -3906,6 +3920,8 @@ void kvm_arch_destroy_vm(struct kvm *kvm)
         kvm_free_physmem(kvm);
         if (kvm->arch.apic_access_page)
                 put_page(kvm->arch.apic_access_page);
+        if (kvm->arch.ept_identity_pagetable)
+                put_page(kvm->arch.ept_identity_pagetable);
         kfree(kvm);
 }
 
diff --git a/arch/x86/kvm/x86_emulate.c b/arch/x86/kvm/x86_emulate.c
index 2ca08386f993..f2a696d6a243 100644
--- a/arch/x86/kvm/x86_emulate.c
+++ b/arch/x86/kvm/x86_emulate.c
@@ -1761,6 +1761,7 @@ twobyte_insn:
                 case 6: /* lmsw */
                         realmode_lmsw(ctxt->vcpu, (u16)c->src.val,
                                       &ctxt->eflags);
+                        c->dst.type = OP_NONE;
                         break;
                 case 7: /* invlpg*/
                         emulate_invlpg(ctxt->vcpu, memop);
diff --git a/arch/x86/mm/discontig_32.c b/arch/x86/mm/discontig_32.c
index 18378850e25a..914ccf983687 100644
--- a/arch/x86/mm/discontig_32.c
+++ b/arch/x86/mm/discontig_32.c
@@ -476,29 +476,3 @@ int memory_add_physaddr_to_nid(u64 addr)
 
 EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid);
 #endif
-
-#ifndef CONFIG_HAVE_ARCH_PARSE_SRAT
-/*
- * XXX FIXME: Make SLIT table parsing available to 32-bit NUMA
- *
- * These stub functions are needed to compile 32-bit NUMA when SRAT is
- * not set. There are functions in srat_64.c for parsing this table
- * and it may be possible to make them common functions.
- */
-void acpi_numa_slit_init (struct acpi_table_slit *slit)
-{
-        printk(KERN_INFO "ACPI: No support for parsing SLIT table\n");
-}
-
-void acpi_numa_processor_affinity_init (struct acpi_srat_cpu_affinity *pa)
-{
-}
-
-void acpi_numa_memory_affinity_init (struct acpi_srat_mem_affinity *ma)
-{
-}
-
-void acpi_numa_arch_fixup(void)
-{
-}
-#endif /* CONFIG_HAVE_ARCH_PARSE_SRAT */
diff --git a/arch/x86/pci/Makefile_32 b/arch/x86/pci/Makefile_32
index 7fa519868d70..89ec35d00efd 100644
--- a/arch/x86/pci/Makefile_32
+++ b/arch/x86/pci/Makefile_32
@@ -6,11 +6,19 @@ obj-$(CONFIG_PCI_DIRECT)	+= direct.o
 obj-$(CONFIG_PCI_OLPC)          += olpc.o
 
 pci-y                           := fixup.o
+
+# Do not change the ordering here. There is a nasty init function
+# ordering dependency which breaks when you move acpi.o below
+# legacy/irq.o
 pci-$(CONFIG_ACPI)              += acpi.o
 pci-y                           += legacy.o irq.o
 
-pci-$(CONFIG_X86_VISWS)         += visws.o fixup.o
-pci-$(CONFIG_X86_NUMAQ)         += numa.o irq.o
+# Careful: VISWS and NUMAQ overrule the pci-y above. The colons are
+# therefor correct. This needs a proper fix by distangling the code.
+pci-$(CONFIG_X86_VISWS)         := visws.o fixup.o
+pci-$(CONFIG_X86_NUMAQ)         := numa.o irq.o
+
+# Necessary for NUMAQ as well
 pci-$(CONFIG_NUMA)              += mp_bus_to_node.o
 
 obj-y                           += $(pci-y) common.o early.o
diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
index 1a9c0c6a1a18..d95de2f199cd 100644
--- a/arch/x86/pci/acpi.c
+++ b/arch/x86/pci/acpi.c
@@ -6,45 +6,6 @@
 #include <asm/numa.h>
 #include "pci.h"
 
-static int __devinit can_skip_ioresource_align(const struct dmi_system_id *d)
-{
-        pci_probe |= PCI_CAN_SKIP_ISA_ALIGN;
-        printk(KERN_INFO "PCI: %s detected, can skip ISA alignment\n", d->ident);
-        return 0;
-}
-
-static struct dmi_system_id acpi_pciprobe_dmi_table[] __devinitdata = {
-/*
- * Systems where PCI IO resource ISA alignment can be skipped
- * when the ISA enable bit in the bridge control is not set
- */
-        {
-                .callback = can_skip_ioresource_align,
-                .ident = "IBM System x3800",
-                .matches = {
-                        DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
-                        DMI_MATCH(DMI_PRODUCT_NAME, "x3800"),
-                },
-        },
-        {
-                .callback = can_skip_ioresource_align,
-                .ident = "IBM System x3850",
-                .matches = {
-                        DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
-                        DMI_MATCH(DMI_PRODUCT_NAME, "x3850"),
-                },
-        },
-        {
-                .callback = can_skip_ioresource_align,
-                .ident = "IBM System x3950",
-                .matches = {
-                        DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
-                        DMI_MATCH(DMI_PRODUCT_NAME, "x3950"),
-                },
-        },
-        {}
-};
-
 struct pci_root_info {
         char *name;
         unsigned int res_num;
@@ -196,8 +157,6 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int do
         int pxm;
 #endif
 
-        dmi_check_system(acpi_pciprobe_dmi_table);
-
         if (domain && !pci_domains_supported) {
                 printk(KERN_WARNING "PCI: Multiple domains not supported "
                        "(dom %d, bus %d)\n", domain, busnum);
diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c
index 2a4d751818b7..bfa72a9475b3 100644
--- a/arch/x86/pci/common.c
+++ b/arch/x86/pci/common.c
@@ -90,6 +90,50 @@ static void __devinit pcibios_fixup_device_resources(struct pci_dev *dev)
                 rom_r->start = rom_r->end = rom_r->flags = 0;
 }
 
+static int __devinit can_skip_ioresource_align(const struct dmi_system_id *d)
+{
+        pci_probe |= PCI_CAN_SKIP_ISA_ALIGN;
+        printk(KERN_INFO "PCI: %s detected, can skip ISA alignment\n", d->ident);
+        return 0;
+}
+
+static struct dmi_system_id can_skip_pciprobe_dmi_table[] __devinitdata = {
+/*
+ * Systems where PCI IO resource ISA alignment can be skipped
+ * when the ISA enable bit in the bridge control is not set
+ */
+        {
+                .callback = can_skip_ioresource_align,
+                .ident = "IBM System x3800",
+                .matches = {
+                        DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
+                        DMI_MATCH(DMI_PRODUCT_NAME, "x3800"),
+                },
+        },
+        {
+                .callback = can_skip_ioresource_align,
+                .ident = "IBM System x3850",
+                .matches = {
+                        DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
+                        DMI_MATCH(DMI_PRODUCT_NAME, "x3850"),
+                },
+        },
+        {
+                .callback = can_skip_ioresource_align,
+                .ident = "IBM System x3950",
+                .matches = {
+                        DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
+                        DMI_MATCH(DMI_PRODUCT_NAME, "x3950"),
+                },
+        },
+        {}
+};
+
+void __init dmi_check_skip_isa_align(void)
+{
+        dmi_check_system(can_skip_pciprobe_dmi_table);
+}
+
 /*
  *  Called after each bus is probed, but before its children
  *  are examined.
@@ -318,13 +362,16 @@ static struct dmi_system_id __devinitdata pciprobe_dmi_table[] = {
         {}
 };
 
+void __init dmi_check_pciprobe(void)
+{
+        dmi_check_system(pciprobe_dmi_table);
+}
+
 struct pci_bus * __devinit pcibios_scan_root(int busnum)
 {
         struct pci_bus *bus = NULL;
         struct pci_sysdata *sd;
 
-        dmi_check_system(pciprobe_dmi_table);
-
         while ((bus = pci_find_next_bus(bus)) != NULL) {
                 if (bus->number == busnum) {
                         /* Already scanned */
@@ -462,6 +509,9 @@ char * __devinit  pcibios_setup(char *str)
         } else if (!strcmp(str, "routeirq")) {
                 pci_routeirq = 1;
                 return NULL;
+        } else if (!strcmp(str, "skip_isa_align")) {
+                pci_probe |= PCI_CAN_SKIP_ISA_ALIGN;
+                return NULL;
         }
         return str;
 }
@@ -489,7 +539,7 @@ void pcibios_disable_device (struct pci_dev *dev)
                 pcibios_disable_irq(dev);
 }
 
-struct pci_bus *pci_scan_bus_on_node(int busno, struct pci_ops *ops, int node)
+struct pci_bus * __devinit pci_scan_bus_on_node(int busno, struct pci_ops *ops, int node)
 {
         struct pci_bus *bus = NULL;
         struct pci_sysdata *sd;
@@ -512,7 +562,7 @@ struct pci_bus *pci_scan_bus_on_node(int busno, struct pci_ops *ops, int node)
         return bus;
 }
 
-struct pci_bus *pci_scan_bus_with_sysdata(int busno)
+struct pci_bus * __devinit pci_scan_bus_with_sysdata(int busno)
 {
         return pci_scan_bus_on_node(busno, &pci_root_ops, -1);
 }
diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c
index b60b2abd480c..ff3a6a336342 100644
--- a/arch/x86/pci/fixup.c
+++ b/arch/x86/pci/fixup.c
@@ -502,7 +502,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SIEMENS, 0x0015,
  */
 static void fam10h_pci_cfg_space_size(struct pci_dev *dev)
 {
-        dev->cfg_size = pci_cfg_space_size_ext(dev, 0);
+        dev->cfg_size = pci_cfg_space_size_ext(dev);
 }
 
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1200, fam10h_pci_cfg_space_size);
diff --git a/arch/x86/pci/init.c b/arch/x86/pci/init.c
index dd30c6076b5d..e70b9c57b88e 100644
--- a/arch/x86/pci/init.c
+++ b/arch/x86/pci/init.c
@@ -33,6 +33,10 @@ static __init int pci_access_init(void)
                 printk(KERN_ERR
                 "PCI: Fatal: No config space access function found\n");
 
+        dmi_check_pciprobe();
+
+        dmi_check_skip_isa_align();
+
         return 0;
 }
 arch_initcall(pci_access_init);
diff --git a/arch/x86/pci/pci.h b/arch/x86/pci/pci.h
index c58805a92db5..f3972b12c60a 100644
--- a/arch/x86/pci/pci.h
+++ b/arch/x86/pci/pci.h
@@ -38,6 +38,9 @@ enum pci_bf_sort_state {
         pci_dmi_bf,
 };
 
+extern void __init dmi_check_pciprobe(void);
+extern void __init dmi_check_skip_isa_align(void);
+
 /* pci-i386.c */
 
 extern unsigned int pcibios_max_latency;
diff --git a/arch/x86/vdso/vdso32-setup.c b/arch/x86/vdso/vdso32-setup.c
index 4dceeb1fc5e0..cf058fecfcee 100644
--- a/arch/x86/vdso/vdso32-setup.c
+++ b/arch/x86/vdso/vdso32-setup.c
@@ -162,7 +162,7 @@ static __init void relocate_vdso(Elf32_Ehdr *ehdr)
         Elf32_Shdr *shdr;
         int i;
 
-        BUG_ON(memcmp(ehdr->e_ident, ELFMAG, 4) != 0 ||
+        BUG_ON(memcmp(ehdr->e_ident, ELFMAG, SELFMAG) != 0 ||
                !elf_check_arch_ia32(ehdr) ||
                ehdr->e_type != ET_DYN);
 
diff --git a/arch/x86/video/fbdev.c b/arch/x86/video/fbdev.c
index 4db42bff8c60..69527688f794 100644
--- a/arch/x86/video/fbdev.c
+++ b/arch/x86/video/fbdev.c
@@ -1,5 +1,4 @@
 /*
- *
  * Copyright (C) 2007 Antonino Daplas <adaplas@gmail.com>
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -29,3 +28,4 @@ int fb_is_primary_device(struct fb_info *info)
         return retval;
 }
 EXPORT_SYMBOL(fb_is_primary_device);
+MODULE_LICENSE("GPL");
diff --git a/block/blk-barrier.c b/block/blk-barrier.c
index 66e55288178c..a09ead19f9c5 100644
--- a/block/blk-barrier.c
+++ b/block/blk-barrier.c
@@ -26,8 +26,7 @@ int blk_queue_ordered(struct request_queue *q, unsigned ordered,
 {
         if (ordered & (QUEUE_ORDERED_PREFLUSH | QUEUE_ORDERED_POSTFLUSH) &&
             prepare_flush_fn == NULL) {
-                printk(KERN_ERR "%s: prepare_flush_fn required\n",
-                                                                __FUNCTION__);
+                printk(KERN_ERR "%s: prepare_flush_fn required\n", __func__);
                 return -EINVAL;
         }
 
diff --git a/block/blk-core.c b/block/blk-core.c
index 5d09f8c56024..b754a4a2f9bd 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -136,7 +136,7 @@ static void req_bio_endio(struct request *rq, struct bio *bio,
 
                 if (unlikely(nbytes > bio->bi_size)) {
                         printk(KERN_ERR "%s: want %u bytes done, %u left\n",
-                               __FUNCTION__, nbytes, bio->bi_size);
+                               __func__, nbytes, bio->bi_size);
                         nbytes = bio->bi_size;
                 }
 
@@ -1566,8 +1566,7 @@ static int __end_that_request_first(struct request *req, int error,
                         if (unlikely(bio->bi_idx >= bio->bi_vcnt)) {
                                 blk_dump_rq_flags(req, "__end_that");
                                 printk(KERN_ERR "%s: bio idx %d >= vcnt %d\n",
-                                                __FUNCTION__, bio->bi_idx,
-                                                bio->bi_vcnt);
+                                       __func__, bio->bi_idx, bio->bi_vcnt);
                                 break;
                         }
 
diff --git a/block/blk-settings.c b/block/blk-settings.c
index 6089384ab064..bb93d4c32775 100644
--- a/block/blk-settings.c
+++ b/block/blk-settings.c
@@ -168,8 +168,8 @@ void blk_queue_max_sectors(struct request_queue *q, unsigned int max_sectors)
 {
         if ((max_sectors << 9) < PAGE_CACHE_SIZE) {
                 max_sectors = 1 << (PAGE_CACHE_SHIFT - 9);
-                printk(KERN_INFO "%s: set to minimum %d\n", __FUNCTION__,
-                                                        max_sectors);
+                printk(KERN_INFO "%s: set to minimum %d\n",
+                       __func__, max_sectors);
         }
 
         if (BLK_DEF_MAX_SECTORS > max_sectors)
@@ -196,8 +196,8 @@ void blk_queue_max_phys_segments(struct request_queue *q,
 {
         if (!max_segments) {
                 max_segments = 1;
-                printk(KERN_INFO "%s: set to minimum %d\n", __FUNCTION__,
-                                                        max_segments);
+                printk(KERN_INFO "%s: set to minimum %d\n",
+                       __func__, max_segments);
         }
 
         q->max_phys_segments = max_segments;
@@ -220,8 +220,8 @@ void blk_queue_max_hw_segments(struct request_queue *q,
 {
         if (!max_segments) {
                 max_segments = 1;
-                printk(KERN_INFO "%s: set to minimum %d\n", __FUNCTION__,
-                                                        max_segments);
+                printk(KERN_INFO "%s: set to minimum %d\n",
+                       __func__, max_segments);
         }
 
         q->max_hw_segments = max_segments;
@@ -241,8 +241,8 @@ void blk_queue_max_segment_size(struct request_queue *q, unsigned int max_size)
 {
         if (max_size < PAGE_CACHE_SIZE) {
                 max_size = PAGE_CACHE_SIZE;
-                printk(KERN_INFO "%s: set to minimum %d\n", __FUNCTION__,
-                                                        max_size);
+                printk(KERN_INFO "%s: set to minimum %d\n",
+                       __func__, max_size);
         }
 
         q->max_segment_size = max_size;
@@ -357,8 +357,8 @@ void blk_queue_segment_boundary(struct request_queue *q, unsigned long mask)
 {
         if (mask < PAGE_CACHE_SIZE - 1) {
                 mask = PAGE_CACHE_SIZE - 1;
-                printk(KERN_INFO "%s: set to minimum %lx\n", __FUNCTION__,
-                                                        mask);
+                printk(KERN_INFO "%s: set to minimum %lx\n",
+                       __func__, mask);
         }
 
         q->seg_boundary_mask = mask;
diff --git a/block/blk-tag.c b/block/blk-tag.c
index e176ddbe599e..de64e0429977 100644
--- a/block/blk-tag.c
+++ b/block/blk-tag.c
@@ -112,7 +112,7 @@ init_tag_map(struct request_queue *q, struct blk_queue_tag *tags, int depth)
         if (q && depth > q->nr_requests * 2) {
                 depth = q->nr_requests * 2;
                 printk(KERN_ERR "%s: adjusted depth to %d\n",
-                                __FUNCTION__, depth);
+                       __func__, depth);
         }
 
         tag_index = kzalloc(depth * sizeof(struct request *), GFP_ATOMIC);
@@ -296,13 +296,13 @@ void blk_queue_end_tag(struct request_queue *q, struct request *rq)
 
         if (unlikely(bqt->tag_index[tag] == NULL))
                 printk(KERN_ERR "%s: tag %d is missing\n",
-                       __FUNCTION__, tag);
+                       __func__, tag);
 
         bqt->tag_index[tag] = NULL;
 
         if (unlikely(!test_bit(tag, bqt->tag_map))) {
                 printk(KERN_ERR "%s: attempt to clear non-busy tag (%d)\n",
-                       __FUNCTION__, tag);
+                       __func__, tag);
                 return;
         }
         /*
@@ -340,7 +340,7 @@ int blk_queue_start_tag(struct request_queue *q, struct request *rq)
         if (unlikely((rq->cmd_flags & REQ_QUEUED))) {
                 printk(KERN_ERR
                        "%s: request %p for device [%s] already tagged %d",
-                       __FUNCTION__, rq,
+                       __func__, rq,
                        rq->rq_disk ? rq->rq_disk->disk_name : "?", rq->tag);
                 BUG();
         }
diff --git a/block/bsg.c b/block/bsg.c
index 23ea4fd1a66d..f0b7cd343216 100644
--- a/block/bsg.c
+++ b/block/bsg.c
@@ -57,7 +57,7 @@ enum {
 #undef BSG_DEBUG
 
 #ifdef BSG_DEBUG
-#define dprintk(fmt, args...) printk(KERN_ERR "%s: " fmt, __FUNCTION__, ##args)
+#define dprintk(fmt, args...) printk(KERN_ERR "%s: " fmt, __func__, ##args)
 #else
 #define dprintk(fmt, args...)
 #endif
@@ -174,7 +174,11 @@ unlock:
 static int blk_fill_sgv4_hdr_rq(struct request_queue *q, struct request *rq,
                                 struct sg_io_v4 *hdr, int has_write_perm)
 {
-        memset(rq->cmd, 0, BLK_MAX_CDB); /* ATAPI hates garbage after CDB */
+        if (hdr->request_len > BLK_MAX_CDB) {
+                rq->cmd = kzalloc(hdr->request_len, GFP_KERNEL);
+                if (!rq->cmd)
+                        return -ENOMEM;
+        }
 
         if (copy_from_user(rq->cmd, (void *)(unsigned long)hdr->request,
                            hdr->request_len))
@@ -211,8 +215,6 @@ bsg_validate_sgv4_hdr(struct request_queue *q, struct sg_io_v4 *hdr, int *rw)
 
         if (hdr->guard != 'Q')
                 return -EINVAL;
-        if (hdr->request_len > BLK_MAX_CDB)
-                return -EINVAL;
         if (hdr->dout_xfer_len > (q->max_sectors << 9) ||
             hdr->din_xfer_len > (q->max_sectors << 9))
                 return -EIO;
@@ -302,6 +304,8 @@ bsg_map_hdr(struct bsg_device *bd, struct sg_io_v4 *hdr)
         }
         return rq;
 out:
+        if (rq->cmd != rq->__cmd)
+                kfree(rq->cmd);
         blk_put_request(rq);
         if (next_rq) {
                 blk_rq_unmap_user(next_rq->bio);
@@ -455,6 +459,8 @@ static int blk_complete_sgv4_hdr_rq(struct request *rq, struct sg_io_v4 *hdr,
                 ret = rq->errors;
 
         blk_rq_unmap_user(bio);
+        if (rq->cmd != rq->__cmd)
+                kfree(rq->cmd);
         blk_put_request(rq);
 
         return ret;
diff --git a/block/elevator.c b/block/elevator.c
index ac5310ef8270..980f8ae147b4 100644
--- a/block/elevator.c
+++ b/block/elevator.c
@@ -650,7 +650,7 @@ void elv_insert(struct request_queue *q, struct request *rq, int where)
 
         default:
                 printk(KERN_ERR "%s: bad insertion point %d\n",
-                       __FUNCTION__, where);
+                       __func__, where);
                 BUG();
         }
 
@@ -808,8 +808,7 @@ struct request *elv_next_request(struct request_queue *q)
                         rq->cmd_flags |= REQ_QUIET;
                         end_queued_request(rq, 0);
                 } else {
-                        printk(KERN_ERR "%s: bad return=%d\n", __FUNCTION__,
-                                                                ret);
+                        printk(KERN_ERR "%s: bad return=%d\n", __func__, ret);
                         break;
                 }
         }
diff --git a/block/scsi_ioctl.c b/block/scsi_ioctl.c
index ffa3720e6ca0..78199c08ec92 100644
--- a/block/scsi_ioctl.c
+++ b/block/scsi_ioctl.c
@@ -33,13 +33,12 @@
 #include <scsi/scsi_cmnd.h>
 
 /* Command group 3 is reserved and should never be used.  */
-const unsigned char scsi_command_size[8] =
+const unsigned char scsi_command_size_tbl[8] =
 {
         6, 10, 10, 12,
         16, 12, 10, 10
 };
-
-EXPORT_SYMBOL(scsi_command_size);
+EXPORT_SYMBOL(scsi_command_size_tbl);
 
 #include <scsi/sg.h>
 
diff --git a/crypto/authenc.c b/crypto/authenc.c
index ed8ac5a6fa5f..4b226768752a 100644
--- a/crypto/authenc.c
+++ b/crypto/authenc.c
@@ -217,9 +217,10 @@ static void crypto_authenc_givencrypt_done(struct crypto_async_request *req,
                                            int err)
 {
         if (!err) {
-                struct aead_givcrypt_request *greq = req->data;
+                struct aead_request *areq = req->data;
+                struct skcipher_givcrypt_request *greq = aead_request_ctx(areq);
 
-                err = crypto_authenc_genicv(&greq->areq, greq->giv, 0);
+                err = crypto_authenc_genicv(areq, greq->giv, 0);
         }
 
         aead_request_complete(req->data, err);
diff --git a/crypto/cryptd.c b/crypto/cryptd.c
index 250425263e00..b150de562057 100644
--- a/crypto/cryptd.c
+++ b/crypto/cryptd.c
@@ -190,8 +190,10 @@ static struct crypto_instance *cryptd_alloc_instance(struct crypto_alg *alg,
         int err;
 
         inst = kzalloc(sizeof(*inst) + sizeof(*ctx), GFP_KERNEL);
-        if (IS_ERR(inst))
+        if (!inst) {
+                inst = ERR_PTR(-ENOMEM);
                 goto out;
+        }
 
         err = -ENAMETOOLONG;
         if (snprintf(inst->alg.cra_driver_name, CRYPTO_MAX_ALG_NAME,
diff --git a/crypto/eseqiv.c b/crypto/eseqiv.c
index b14f14e314b6..881d30910434 100644
--- a/crypto/eseqiv.c
+++ b/crypto/eseqiv.c
@@ -136,7 +136,8 @@ static int eseqiv_givencrypt(struct skcipher_givcrypt_request *req)
         }
 
         ablkcipher_request_set_crypt(subreq, reqctx->src, dst,
-                                     req->creq.nbytes, req->creq.info);
+                                     req->creq.nbytes + ivsize,
+                                     req->creq.info);
 
         memcpy(req->creq.info, ctx->salt, ivsize);
 
diff --git a/drivers/base/cpu.c b/drivers/base/cpu.c
index 6fe417429977..e38dfed41d80 100644
--- a/drivers/base/cpu.c
+++ b/drivers/base/cpu.c
@@ -18,7 +18,7 @@ struct sysdev_class cpu_sysdev_class = {
 };
 EXPORT_SYMBOL(cpu_sysdev_class);
 
-static struct sys_device *cpu_sys_devices[NR_CPUS];
+static DEFINE_PER_CPU(struct sys_device *, cpu_sys_devices);
 
 #ifdef CONFIG_HOTPLUG_CPU
 static ssize_t show_online(struct sys_device *dev, char *buf)
@@ -68,7 +68,7 @@ void unregister_cpu(struct cpu *cpu)
         sysdev_remove_file(&cpu->sysdev, &attr_online);
 
         sysdev_unregister(&cpu->sysdev);
-        cpu_sys_devices[logical_cpu] = NULL;
+        per_cpu(cpu_sys_devices, logical_cpu) = NULL;
         return;
 }
 #else /* ... !CONFIG_HOTPLUG_CPU */
@@ -167,7 +167,7 @@ int __cpuinit register_cpu(struct cpu *cpu, int num)
         if (!error && cpu->hotpluggable)
                 register_cpu_control(cpu);
         if (!error)
-                cpu_sys_devices[num] = &cpu->sysdev;
+                per_cpu(cpu_sys_devices, num) = &cpu->sysdev;
         if (!error)
                 register_cpu_under_node(num, cpu_to_node(num));
 
@@ -180,8 +180,8 @@ int __cpuinit register_cpu(struct cpu *cpu, int num)
 
 struct sys_device *get_cpu_sysdev(unsigned cpu)
 {
-        if (cpu < NR_CPUS)
-                return cpu_sys_devices[cpu];
+        if (cpu < nr_cpu_ids && cpu_possible(cpu))
+                return per_cpu(cpu_sys_devices, cpu);
         else
                 return NULL;
 }
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index e539be5750dc..e336b05fe4a7 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -428,13 +428,9 @@ static void __devinit cciss_procinit(int i)
                 proc_cciss = proc_mkdir("driver/cciss", NULL);
         if (!proc_cciss)
                 return;
-        pde = proc_create(hba[i]->devname, S_IWUSR | S_IRUSR | S_IRGRP |
+        pde = proc_create_data(hba[i]->devname, S_IWUSR | S_IRUSR | S_IRGRP |
                                         S_IROTH, proc_cciss,
-                                        &cciss_proc_fops);
-        if (!pde)
-                return;
-
-        pde->data = hba[i];
+                                        &cciss_proc_fops, hba[i]);
 }
 #endif                          /* CONFIG_PROC_FS */
 
diff --git a/drivers/block/ub.c b/drivers/block/ub.c
index e322cce8c12d..3a281ef11ffa 100644
--- a/drivers/block/ub.c
+++ b/drivers/block/ub.c
@@ -205,6 +205,7 @@ struct ub_scsi_cmd {
         unsigned char key, asc, ascq;   /* May be valid if error==-EIO */
 
         int stat_count;                 /* Retries getting status. */
+        unsigned int timeo;             /* jiffies until rq->timeout changes */
 
         unsigned int len;               /* Requested length */
         unsigned int current_sg;
@@ -318,6 +319,7 @@ struct ub_dev {
         int openc;                      /* protected by ub_lock! */
                                         /* kref is too implicit for our taste */
         int reset;                      /* Reset is running */
+        int bad_resid;
         unsigned int tagcnt;
         char name[12];
         struct usb_device *dev;
@@ -764,6 +766,12 @@ static void ub_cmd_build_packet(struct ub_dev *sc, struct ub_lun *lun,
         cmd->cdb_len = rq->cmd_len;
 
         cmd->len = rq->data_len;
+
+        /*
+         * To reapply this to every URB is not as incorrect as it looks.
+         * In return, we avoid any complicated tracking calculations.
+         */
+        cmd->timeo = rq->timeout;
 }
 
 static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
@@ -785,10 +793,6 @@ static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
                         scsi_status = 0;
                 } else {
                         if (cmd->act_len != cmd->len) {
-                                if ((cmd->key == MEDIUM_ERROR ||
-                                     cmd->key == UNIT_ATTENTION) &&
-                                    ub_rw_cmd_retry(sc, lun, urq, cmd) == 0)
-                                        return;
                                 scsi_status = SAM_STAT_CHECK_CONDITION;
                         } else {
                                 scsi_status = 0;
@@ -804,7 +808,10 @@ static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
                         else
                                 scsi_status = DID_ERROR << 16;
                 } else {
-                        if (cmd->error == -EIO) {
+                        if (cmd->error == -EIO &&
+                            (cmd->key == 0 ||
+                             cmd->key == MEDIUM_ERROR ||
+                             cmd->key == UNIT_ATTENTION)) {
                                 if (ub_rw_cmd_retry(sc, lun, urq, cmd) == 0)
                                         return;
                         }
@@ -1259,14 +1266,19 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
                         return;
                 }
 
-                len = le32_to_cpu(bcs->Residue);
-                if (len != cmd->len - cmd->act_len) {
-                        /*
-                         * It is all right to transfer less, the caller has
-                         * to check. But it's not all right if the device
-                         * counts disagree with our counts.
-                         */
-                        goto Bad_End;
+                if (!sc->bad_resid) {
+                        len = le32_to_cpu(bcs->Residue);
+                        if (len != cmd->len - cmd->act_len) {
+                                /*
+                                 * Only start ignoring if this cmd ended well.
+                                 */
+                                if (cmd->len == cmd->act_len) {
+                                        printk(KERN_NOTICE "%s: "
+                                            "bad residual %d of %d, ignoring\n",
+                                            sc->name, len, cmd->len);
+                                        sc->bad_resid = 1;
+                                }
+                        }
                 }
 
                 switch (bcs->Status) {
@@ -1297,8 +1309,7 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
                 ub_state_done(sc, cmd, -EIO);
 
         } else {
-                printk(KERN_WARNING "%s: "
-                    "wrong command state %d\n",
+                printk(KERN_WARNING "%s: wrong command state %d\n",
                     sc->name, cmd->state);
                 ub_state_done(sc, cmd, -EINVAL);
                 return;
@@ -1336,7 +1347,10 @@ static void ub_data_start(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
                 return;
         }
 
-        sc->work_timer.expires = jiffies + UB_DATA_TIMEOUT;
+        if (cmd->timeo)
+                sc->work_timer.expires = jiffies + cmd->timeo;
+        else
+                sc->work_timer.expires = jiffies + UB_DATA_TIMEOUT;
         add_timer(&sc->work_timer);
 
         cmd->state = UB_CMDST_DATA;
@@ -1376,7 +1390,10 @@ static int __ub_state_stat(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
                 return -1;
         }
 
-        sc->work_timer.expires = jiffies + UB_STAT_TIMEOUT;
+        if (cmd->timeo)
+                sc->work_timer.expires = jiffies + cmd->timeo;
+        else
+                sc->work_timer.expires = jiffies + UB_STAT_TIMEOUT;
         add_timer(&sc->work_timer);
         return 0;
 }
@@ -1515,8 +1532,7 @@ static void ub_top_sense_done(struct ub_dev *sc, struct ub_scsi_cmd *scmd)
                 return;
         }
         if (cmd->state != UB_CMDST_SENSE) {
-                printk(KERN_WARNING "%s: "
-                    "sense done with bad cmd state %d\n",
+                printk(KERN_WARNING "%s: sense done with bad cmd state %d\n",
                     sc->name, cmd->state);
                 return;
         }
@@ -1720,7 +1736,7 @@ static int ub_bd_ioctl(struct inode *inode, struct file *filp,
 }
 
 /*
- * This is called once a new disk was seen by the block layer or by ub_probe().
+ * This is called by check_disk_change if we reported a media change.
  * The main onjective here is to discover the features of the media such as
  * the capacity, read-only status, etc. USB storage generally does not
  * need to be spun up, but if we needed it, this would be the place.
@@ -2136,8 +2152,7 @@ static int ub_get_pipes(struct ub_dev *sc, struct usb_device *dev,
         }
 
         if (ep_in == NULL || ep_out == NULL) {
-                printk(KERN_NOTICE "%s: failed endpoint check\n",
-                    sc->name);
+                printk(KERN_NOTICE "%s: failed endpoint check\n", sc->name);
                 return -ENODEV;
         }
 
@@ -2354,7 +2369,7 @@ static void ub_disconnect(struct usb_interface *intf)
         spin_unlock_irqrestore(&ub_lock, flags);
 
         /*
-         * Fence stall clearnings, operations triggered by unlinkings and so on.
+         * Fence stall clearings, operations triggered by unlinkings and so on.
          * We do not attempt to unlink any URBs, because we do not trust the
          * unlink paths in HC drivers. Also, we get -84 upon disconnect anyway.
          */
@@ -2417,7 +2432,7 @@ static void ub_disconnect(struct usb_interface *intf)
         spin_unlock_irqrestore(sc->lock, flags);
 
         /*
-         * There is virtually no chance that other CPU runs times so long
+         * There is virtually no chance that other CPU runs a timeout so long
          * after ub_urb_complete should have called del_timer, but only if HCD
          * didn't forget to deliver a callback on unlink.
          */
diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index 0cfbe8c594a5..84e064ffee52 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -35,7 +35,7 @@ struct virtblk_req
         struct list_head list;
         struct request *req;
         struct virtio_blk_outhdr out_hdr;
-        struct virtio_blk_inhdr in_hdr;
+        u8 status;
 };
 
 static void blk_done(struct virtqueue *vq)
@@ -48,7 +48,7 @@ static void blk_done(struct virtqueue *vq)
         spin_lock_irqsave(&vblk->lock, flags);
         while ((vbr = vblk->vq->vq_ops->get_buf(vblk->vq, &len)) != NULL) {
                 int uptodate;
-                switch (vbr->in_hdr.status) {
+                switch (vbr->status) {
                 case VIRTIO_BLK_S_OK:
                         uptodate = 1;
                         break;
@@ -101,7 +101,7 @@ static bool do_req(struct request_queue *q, struct virtio_blk *vblk,
         sg_init_table(vblk->sg, VIRTIO_MAX_SG);
         sg_set_buf(&vblk->sg[0], &vbr->out_hdr, sizeof(vbr->out_hdr));
         num = blk_rq_map_sg(q, vbr->req, vblk->sg+1);
-        sg_set_buf(&vblk->sg[num+1], &vbr->in_hdr, sizeof(vbr->in_hdr));
+        sg_set_buf(&vblk->sg[num+1], &vbr->status, sizeof(vbr->status));
 
         if (rq_data_dir(vbr->req) == WRITE) {
                 vbr->out_hdr.type |= VIRTIO_BLK_T_OUT;
@@ -157,10 +157,25 @@ static int virtblk_ioctl(struct inode *inode, struct file *filp,
 /* We provide getgeo only to please some old bootloader/partitioning tools */
 static int virtblk_getgeo(struct block_device *bd, struct hd_geometry *geo)
 {
-        /* some standard values, similar to sd */
-        geo->heads = 1 << 6;
-        geo->sectors = 1 << 5;
-        geo->cylinders = get_capacity(bd->bd_disk) >> 11;
+        struct virtio_blk *vblk = bd->bd_disk->private_data;
+        struct virtio_blk_geometry vgeo;
+        int err;
+
+        /* see if the host passed in geometry config */
+        err = virtio_config_val(vblk->vdev, VIRTIO_BLK_F_GEOMETRY,
+                                offsetof(struct virtio_blk_config, geometry),
+                                &vgeo);
+
+        if (!err) {
+                geo->heads = vgeo.heads;
+                geo->sectors = vgeo.sectors;
+                geo->cylinders = vgeo.cylinders;
+        } else {
+                /* some standard values, similar to sd */
+                geo->heads = 1 << 6;
+                geo->sectors = 1 << 5;
+                geo->cylinders = get_capacity(bd->bd_disk) >> 11;
+        }
         return 0;
 }
 
@@ -242,12 +257,12 @@ static int virtblk_probe(struct virtio_device *vdev)
         index++;
 
         /* If barriers are supported, tell block layer that queue is ordered */
-        if (vdev->config->feature(vdev, VIRTIO_BLK_F_BARRIER))
+        if (virtio_has_feature(vdev, VIRTIO_BLK_F_BARRIER))
                 blk_queue_ordered(vblk->disk->queue, QUEUE_ORDERED_TAG, NULL);
 
         /* Host must always specify the capacity. */
-        __virtio_config_val(vdev, offsetof(struct virtio_blk_config, capacity),
-                            &cap);
+        vdev->config->get(vdev, offsetof(struct virtio_blk_config, capacity),
+                          &cap, sizeof(cap));
 
         /* If capacity is too big, truncate with warning. */
         if ((sector_t)cap != cap) {
@@ -289,7 +304,6 @@ out:
 static void virtblk_remove(struct virtio_device *vdev)
 {
         struct virtio_blk *vblk = vdev->priv;
-        int major = vblk->disk->major;
 
         /* Nothing should be pending. */
         BUG_ON(!list_empty(&vblk->reqs));
@@ -299,7 +313,6 @@ static void virtblk_remove(struct virtio_device *vdev)
 
         blk_cleanup_queue(vblk->disk->queue);
         put_disk(vblk->disk);
-        unregister_blkdev(major, "virtblk");
         mempool_destroy(vblk->pool);
         vdev->config->del_vq(vblk->vq);
         kfree(vblk);
@@ -310,7 +323,14 @@ static struct virtio_device_id id_table[] = {
         { 0 },
 };
 
+static unsigned int features[] = {
+        VIRTIO_BLK_F_BARRIER, VIRTIO_BLK_F_SEG_MAX, VIRTIO_BLK_F_SIZE_MAX,
+        VIRTIO_BLK_F_GEOMETRY,
+};
+
 static struct virtio_driver virtio_blk = {
+        .feature_table = features,
+        .feature_table_size = ARRAY_SIZE(features),
         .driver.name =  KBUILD_MODNAME,
         .driver.owner = THIS_MODULE,
         .id_table =     id_table,
diff --git a/drivers/char/i8k.c b/drivers/char/i8k.c
index f49037b744f9..b60d425ce8d1 100644
--- a/drivers/char/i8k.c
+++ b/drivers/char/i8k.c
@@ -77,6 +77,10 @@ static int power_status;
 module_param(power_status, bool, 0600);
 MODULE_PARM_DESC(power_status, "Report power status in /proc/i8k");
 
+static int fan_mult = I8K_FAN_MULT;
+module_param(fan_mult, int, 0);
+MODULE_PARM_DESC(fan_mult, "Factor to multiply fan speed with");
+
 static int i8k_open_fs(struct inode *inode, struct file *file);
 static int i8k_ioctl(struct inode *, struct file *, unsigned int,
                      unsigned long);
@@ -239,7 +243,7 @@ static int i8k_get_fan_speed(int fan)
         struct smm_regs regs = { .eax = I8K_SMM_GET_SPEED, };
 
         regs.ebx = fan & 0xff;
-        return i8k_smm(&regs) ? : (regs.eax & 0xffff) * I8K_FAN_MULT;
+        return i8k_smm(&regs) ? : (regs.eax & 0xffff) * fan_mult;
 }
 
 /*
diff --git a/drivers/char/mmtimer.c b/drivers/char/mmtimer.c
index d83db5d880e0..192961fd7173 100644
--- a/drivers/char/mmtimer.c
+++ b/drivers/char/mmtimer.c
@@ -30,6 +30,8 @@
 #include <linux/miscdevice.h>
 #include <linux/posix-timers.h>
 #include <linux/interrupt.h>
+#include <linux/time.h>
+#include <linux/math64.h>
 
 #include <asm/uaccess.h>
 #include <asm/sn/addrs.h>
@@ -472,8 +474,8 @@ static int sgi_clock_get(clockid_t clockid, struct timespec *tp)
 
         nsec = rtc_time() * sgi_clock_period
                         + sgi_clock_offset.tv_nsec;
-        tp->tv_sec = div_long_long_rem(nsec, NSEC_PER_SEC, &tp->tv_nsec)
-                        + sgi_clock_offset.tv_sec;
+        *tp = ns_to_timespec(nsec);
+        tp->tv_sec += sgi_clock_offset.tv_sec;
         return 0;
 };
 
@@ -481,11 +483,11 @@ static int sgi_clock_set(clockid_t clockid, struct timespec *tp)
 {
 
         u64 nsec;
-        u64 rem;
+        u32 rem;
 
         nsec = rtc_time() * sgi_clock_period;
 
-        sgi_clock_offset.tv_sec = tp->tv_sec - div_long_long_rem(nsec, NSEC_PER_SEC, &rem);
+        sgi_clock_offset.tv_sec = tp->tv_sec - div_u64_rem(nsec, NSEC_PER_SEC, &rem);
 
         if (rem <= tp->tv_nsec)
                 sgi_clock_offset.tv_nsec = tp->tv_sec - rem;
@@ -644,9 +646,6 @@ static int sgi_timer_del(struct k_itimer *timr)
         return 0;
 }
 
-#define timespec_to_ns(x) ((x).tv_nsec + (x).tv_sec * NSEC_PER_SEC)
-#define ns_to_timespec(ts, nsec) (ts).tv_sec = div_long_long_rem(nsec, NSEC_PER_SEC, &(ts).tv_nsec)
-
 /* Assumption: it_lock is already held with irq's disabled */
 static void sgi_timer_get(struct k_itimer *timr, struct itimerspec *cur_setting)
 {
@@ -659,9 +658,8 @@ static void sgi_timer_get(struct k_itimer *timr, struct itimerspec *cur_setting)
                 return;
         }
 
-        ns_to_timespec(cur_setting->it_interval, timr->it.mmtimer.incr * sgi_clock_period);
-        ns_to_timespec(cur_setting->it_value, (timr->it.mmtimer.expires - rtc_time())* sgi_clock_period);
-        return;
+        cur_setting->it_interval = ns_to_timespec(timr->it.mmtimer.incr * sgi_clock_period);
+        cur_setting->it_value = ns_to_timespec((timr->it.mmtimer.expires - rtc_time()) * sgi_clock_period);
 }
 
 
@@ -679,8 +677,8 @@ static int sgi_timer_set(struct k_itimer *timr, int flags,
                 sgi_timer_get(timr, old_setting);
 
         sgi_timer_del(timr);
-        when = timespec_to_ns(new_setting->it_value);
-        period = timespec_to_ns(new_setting->it_interval);
+        when = timespec_to_ns(&new_setting->it_value);
+        period = timespec_to_ns(&new_setting->it_interval);
 
         if (when == 0)
                 /* Clear timer */
@@ -695,7 +693,7 @@ static int sgi_timer_set(struct k_itimer *timr, int flags,
                 unsigned long now;
 
                 getnstimeofday(&n);
-                now = timespec_to_ns(n);
+                now = timespec_to_ns(&n);
                 if (when > now)
                         when -= now;
                 else
diff --git a/drivers/char/serial167.c b/drivers/char/serial167.c
index fd2db07a50fc..3b23270eaa65 100644
--- a/drivers/char/serial167.c
+++ b/drivers/char/serial167.c
@@ -1073,7 +1073,7 @@ static int cy_put_char(struct tty_struct *tty, unsigned char ch)
                 return 0;
 
         if (!info->xmit_buf)
-                return;
+                return 0;
 
         local_irq_save(flags);
         if (info->xmit_cnt >= PAGE_SIZE - 1) {
diff --git a/drivers/char/synclink.c b/drivers/char/synclink.c
index 513b7c2f3e26..ac5080df2565 100644
--- a/drivers/char/synclink.c
+++ b/drivers/char/synclink.c
@@ -2028,13 +2028,13 @@ static void mgsl_change_params(struct mgsl_struct *info)
  */
 static int mgsl_put_char(struct tty_struct *tty, unsigned char ch)
 {
-        struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data;
+        struct mgsl_struct *info = tty->driver_data;
         unsigned long flags;
-        int ret;
+        int ret = 0;
 
-        if ( debug_level >= DEBUG_LEVEL_INFO ) {
-                printk( "%s(%d):mgsl_put_char(%d) on %s\n",
-                        __FILE__,__LINE__,ch,info->device_name);
+        if (debug_level >= DEBUG_LEVEL_INFO) {
+                printk(KERN_DEBUG "%s(%d):mgsl_put_char(%d) on %s\n",
+                        __FILE__, __LINE__, ch, info->device_name);
         }               
         
         if (mgsl_paranoia_check(info, tty->name, "mgsl_put_char"))
@@ -2043,9 +2043,9 @@ static int mgsl_put_char(struct tty_struct *tty, unsigned char ch)
         if (!tty || !info->xmit_buf)
                 return 0;
 
-        spin_lock_irqsave(&info->irq_spinlock,flags);
+        spin_lock_irqsave(&info->irq_spinlock, flags);
         
-        if ( (info->params.mode == MGSL_MODE_ASYNC ) || !info->tx_active ) {
+        if ((info->params.mode == MGSL_MODE_ASYNC ) || !info->tx_active) {
                 if (info->xmit_cnt < SERIAL_XMIT_SIZE - 1) {
                         info->xmit_buf[info->xmit_head++] = ch;
                         info->xmit_head &= SERIAL_XMIT_SIZE-1;
@@ -2053,7 +2053,7 @@ static int mgsl_put_char(struct tty_struct *tty, unsigned char ch)
                         ret = 1;
                 }
         }
-        spin_unlock_irqrestore(&info->irq_spinlock,flags);
+        spin_unlock_irqrestore(&info->irq_spinlock, flags);
         return ret;
         
 }       /* end of mgsl_put_char() */
diff --git a/drivers/char/tty_audit.c b/drivers/char/tty_audit.c
index 6342b0534f4d..3582f43345a8 100644
--- a/drivers/char/tty_audit.c
+++ b/drivers/char/tty_audit.c
@@ -11,6 +11,7 @@
 
 #include <linux/audit.h>
 #include <linux/file.h>
+#include <linux/fdtable.h>
 #include <linux/tty.h>
 
 struct tty_audit_buf {
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index 1d298c2cf930..49c1a2267a55 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -78,6 +78,7 @@
 #include <linux/tty_flip.h>
 #include <linux/devpts_fs.h>
 #include <linux/file.h>
+#include <linux/fdtable.h>
 #include <linux/console.h>
 #include <linux/timer.h>
 #include <linux/ctype.h>
diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.c b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
index dfe6907ae15b..3edf1fc12963 100644
--- a/drivers/char/xilinx_hwicap/xilinx_hwicap.c
+++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
@@ -623,8 +623,8 @@ static int __devinit hwicap_setup(struct device *dev, int id,
 
         if (!request_mem_region(drvdata->mem_start,
                                         drvdata->mem_size, DRIVER_NAME)) {
-                dev_err(dev, "Couldn't lock memory region at %p\n",
-                        (void *)regs_res->start);
+                dev_err(dev, "Couldn't lock memory region at %Lx\n",
+                        regs_res->start);
                 retval = -EBUSY;
                 goto failed1;
         }
@@ -643,7 +643,7 @@ static int __devinit hwicap_setup(struct device *dev, int id,
         mutex_init(&drvdata->sem);
         drvdata->is_open = 0;
 
-        dev_info(dev, "ioremap %lx to %p with size %x\n",
+        dev_info(dev, "ioremap %lx to %p with size %Lx\n",
                  (unsigned long int)drvdata->mem_start,
                         drvdata->base_address, drvdata->mem_size);
 
diff --git a/drivers/edac/edac_core.h b/drivers/edac/edac_core.h
index a9aa845dbe74..b27b13c5eb5a 100644
--- a/drivers/edac/edac_core.h
+++ b/drivers/edac/edac_core.h
@@ -97,7 +97,7 @@ extern int edac_debug_level;
 #define PCI_VEND_DEV(vend, dev) PCI_VENDOR_ID_ ## vend, \
         PCI_DEVICE_ID_ ## vend ## _ ## dev
 
-#define dev_name(dev) (dev)->dev_name
+#define edac_dev_name(dev) (dev)->dev_name
 
 /* memory devices */
 enum dev_type {
diff --git a/drivers/edac/edac_device.c b/drivers/edac/edac_device.c
index 63372fa7ecfe..5fcd3d89c75d 100644
--- a/drivers/edac/edac_device.c
+++ b/drivers/edac/edac_device.c
@@ -333,7 +333,7 @@ static int add_edac_dev_to_global_list(struct edac_device_ctl_info *edac_dev)
 fail0:
         edac_printk(KERN_WARNING, EDAC_MC,
                         "%s (%s) %s %s already assigned %d\n",
-                        rover->dev->bus_id, dev_name(rover),
+                        rover->dev->bus_id, edac_dev_name(rover),
                         rover->mod_name, rover->ctl_name, rover->dev_idx);
         return 1;
 
@@ -538,7 +538,7 @@ int edac_device_add_device(struct edac_device_ctl_info *edac_dev)
                                 "'%s': DEV '%s' (%s)\n",
                                 edac_dev->mod_name,
                                 edac_dev->ctl_name,
-                                dev_name(edac_dev),
+                                edac_dev_name(edac_dev),
                                 edac_op_state_to_string(edac_dev->op_state));
 
         mutex_unlock(&device_ctls_mutex);
@@ -599,7 +599,7 @@ struct edac_device_ctl_info *edac_device_del_device(struct device *dev)
         edac_printk(KERN_INFO, EDAC_MC,
                 "Removed device %d for %s %s: DEV %s\n",
                 edac_dev->dev_idx,
-                edac_dev->mod_name, edac_dev->ctl_name, dev_name(edac_dev));
+                edac_dev->mod_name, edac_dev->ctl_name, edac_dev_name(edac_dev));
 
         return edac_dev;
 }
diff --git a/drivers/edac/edac_mc.c b/drivers/edac/edac_mc.c
index a4cf1645f588..d110392d48f4 100644
--- a/drivers/edac/edac_mc.c
+++ b/drivers/edac/edac_mc.c
@@ -402,7 +402,7 @@ static int add_mc_to_global_list(struct mem_ctl_info *mci)
 fail0:
         edac_printk(KERN_WARNING, EDAC_MC,
                 "%s (%s) %s %s already assigned %d\n", p->dev->bus_id,
-                dev_name(mci), p->mod_name, p->ctl_name, p->mc_idx);
+                edac_dev_name(mci), p->mod_name, p->ctl_name, p->mc_idx);
         return 1;
 
 fail1:
@@ -517,7 +517,7 @@ int edac_mc_add_mc(struct mem_ctl_info *mci)
 
         /* Report action taken */
         edac_mc_printk(mci, KERN_INFO, "Giving out device to '%s' '%s':"
-                " DEV %s\n", mci->mod_name, mci->ctl_name, dev_name(mci));
+                " DEV %s\n", mci->mod_name, mci->ctl_name, edac_dev_name(mci));
 
         mutex_unlock(&mem_ctls_mutex);
         return 0;
@@ -565,7 +565,7 @@ struct mem_ctl_info *edac_mc_del_mc(struct device *dev)
 
         edac_printk(KERN_INFO, EDAC_MC,
                 "Removed device %d for %s %s: DEV %s\n", mci->mc_idx,
-                mci->mod_name, mci->ctl_name, dev_name(mci));
+                mci->mod_name, mci->ctl_name, edac_dev_name(mci));
 
         return mci;
 }
diff --git a/drivers/edac/edac_pci.c b/drivers/edac/edac_pci.c
index 9b24340b52e1..22ec9d5d4312 100644
--- a/drivers/edac/edac_pci.c
+++ b/drivers/edac/edac_pci.c
@@ -150,7 +150,7 @@ static int add_edac_pci_to_global_list(struct edac_pci_ctl_info *pci)
 fail0:
         edac_printk(KERN_WARNING, EDAC_PCI,
                 "%s (%s) %s %s already assigned %d\n",
-                rover->dev->bus_id, dev_name(rover),
+                rover->dev->bus_id, edac_dev_name(rover),
                 rover->mod_name, rover->ctl_name, rover->pci_idx);
         return 1;
 
@@ -360,7 +360,7 @@ int edac_pci_add_device(struct edac_pci_ctl_info *pci, int edac_idx)
                         " DEV '%s' (%s)\n",
                         pci->mod_name,
                         pci->ctl_name,
-                        dev_name(pci), edac_op_state_to_string(pci->op_state));
+                        edac_dev_name(pci), edac_op_state_to_string(pci->op_state));
 
         mutex_unlock(&edac_pci_ctls_mutex);
         return 0;
@@ -415,7 +415,7 @@ struct edac_pci_ctl_info *edac_pci_del_device(struct device *dev)
 
         edac_printk(KERN_INFO, EDAC_PCI,
                 "Removed device %d for %s %s: DEV %s\n",
-                pci->pci_idx, pci->mod_name, pci->ctl_name, dev_name(pci));
+                pci->pci_idx, pci->mod_name, pci->ctl_name, edac_dev_name(pci));
 
         return pci;
 }
diff --git a/drivers/firewire/fw-sbp2.c b/drivers/firewire/fw-sbp2.c
index 2a999373863e..b2458bb8e9ca 100644
--- a/drivers/firewire/fw-sbp2.c
+++ b/drivers/firewire/fw-sbp2.c
@@ -784,7 +784,7 @@ static void sbp2_release_target(struct kref *kref)
                 kfree(lu);
         }
         scsi_remove_host(shost);
-        fw_notify("released %s\n", tgt->bus_id);
+        fw_notify("released %s, target %d:0:0\n", tgt->bus_id, shost->host_no);
 
         fw_unit_put(tgt->unit);
         scsi_host_put(shost);
@@ -1487,7 +1487,7 @@ static int sbp2_scsi_queuecommand(struct scsi_cmnd *cmd, scsi_done_fn_t done)
         if (scsi_sg_count(cmd) && sbp2_map_scatterlist(orb, device, lu) < 0)
                 goto out;
 
-        memcpy(orb->request.command_block, cmd->cmnd, COMMAND_SIZE(*cmd->cmnd));
+        memcpy(orb->request.command_block, cmd->cmnd, cmd->cmd_len);
 
         orb->base.callback = complete_command_orb;
         orb->base.request_bus =
diff --git a/drivers/gpio/pca953x.c b/drivers/gpio/pca953x.c
index 5a99e81d2784..93f916720b13 100644
--- a/drivers/gpio/pca953x.c
+++ b/drivers/gpio/pca953x.c
@@ -30,6 +30,8 @@ static const struct i2c_device_id pca953x_id[] = {
         { "pca9537", 4, },
         { "pca9538", 8, },
         { "pca9539", 16, },
+        { "pca9555", 16, },
+        { "pca9557", 8, },
         /* REVISIT several pca955x parts should work here too */
         { }
 };
@@ -193,7 +195,7 @@ static int __devinit pca953x_probe(struct i2c_client *client,
 {
         struct pca953x_platform_data *pdata;
         struct pca953x_chip *chip;
-        int ret, i;
+        int ret;
 
         pdata = client->dev.platform_data;
         if (pdata == NULL)
diff --git a/drivers/hwmon/adt7473.c b/drivers/hwmon/adt7473.c
index 9587869bdba0..c1009d6f9796 100644
--- a/drivers/hwmon/adt7473.c
+++ b/drivers/hwmon/adt7473.c
@@ -422,18 +422,14 @@ static ssize_t show_volt(struct device *dev, struct device_attribute *devattr,
  * number in the range -128 to 127, or as an unsigned number that must
  * be offset by 64.
  */
-static int decode_temp(struct adt7473_data *data, u8 raw)
+static int decode_temp(u8 twos_complement, u8 raw)
 {
-        if (data->temp_twos_complement)
-                return (s8)raw;
-        return raw - 64;
+        return twos_complement ? (s8)raw : raw - 64;
 }
 
-static u8 encode_temp(struct adt7473_data *data, int cooked)
+static u8 encode_temp(u8 twos_complement, int cooked)
 {
-        if (data->temp_twos_complement)
-                return (cooked & 0xFF);
-        return cooked + 64;
+        return twos_complement ? cooked & 0xFF : cooked + 64;
 }
 
 static ssize_t show_temp_min(struct device *dev,
@@ -442,8 +438,9 @@ static ssize_t show_temp_min(struct device *dev,
 {
         struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
         struct adt7473_data *data = adt7473_update_device(dev);
-        return sprintf(buf, "%d\n",
-                       1000 * decode_temp(data, data->temp_min[attr->index]));
+        return sprintf(buf, "%d\n", 1000 * decode_temp(
+                                                data->temp_twos_complement,
+                                                data->temp_min[attr->index]));
 }
 
 static ssize_t set_temp_min(struct device *dev,
@@ -455,7 +452,7 @@ static ssize_t set_temp_min(struct device *dev,
         struct i2c_client *client = to_i2c_client(dev);
         struct adt7473_data *data = i2c_get_clientdata(client);
         int temp = simple_strtol(buf, NULL, 10) / 1000;
-        temp = encode_temp(data, temp);
+        temp = encode_temp(data->temp_twos_complement, temp);
 
         mutex_lock(&data->lock);
         data->temp_min[attr->index] = temp;
@@ -472,8 +469,9 @@ static ssize_t show_temp_max(struct device *dev,
 {
         struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
         struct adt7473_data *data = adt7473_update_device(dev);
-        return sprintf(buf, "%d\n",
-                       1000 * decode_temp(data, data->temp_max[attr->index]));
+        return sprintf(buf, "%d\n", 1000 * decode_temp(
+                                                data->temp_twos_complement,
+                                                data->temp_max[attr->index]));
 }
 
 static ssize_t set_temp_max(struct device *dev,
@@ -485,7 +483,7 @@ static ssize_t set_temp_max(struct device *dev,
         struct i2c_client *client = to_i2c_client(dev);
         struct adt7473_data *data = i2c_get_clientdata(client);
         int temp = simple_strtol(buf, NULL, 10) / 1000;
-        temp = encode_temp(data, temp);
+        temp = encode_temp(data->temp_twos_complement, temp);
 
         mutex_lock(&data->lock);
         data->temp_max[attr->index] = temp;
@@ -501,8 +499,9 @@ static ssize_t show_temp(struct device *dev, struct device_attribute *devattr,
 {
         struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
         struct adt7473_data *data = adt7473_update_device(dev);
-        return sprintf(buf, "%d\n",
-                       1000 * decode_temp(data, data->temp[attr->index]));
+        return sprintf(buf, "%d\n", 1000 * decode_temp(
+                                                data->temp_twos_complement,
+                                                data->temp[attr->index]));
 }
 
 static ssize_t show_fan_min(struct device *dev,
@@ -671,8 +670,9 @@ static ssize_t show_temp_tmax(struct device *dev,
 {
         struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
         struct adt7473_data *data = adt7473_update_device(dev);
-        return sprintf(buf, "%d\n",
-                       1000 * decode_temp(data, data->temp_tmax[attr->index]));
+        return sprintf(buf, "%d\n", 1000 * decode_temp(
+                                                data->temp_twos_complement,
+                                                data->temp_tmax[attr->index]));
 }
 
 static ssize_t set_temp_tmax(struct device *dev,
@@ -684,7 +684,7 @@ static ssize_t set_temp_tmax(struct device *dev,
         struct i2c_client *client = to_i2c_client(dev);
         struct adt7473_data *data = i2c_get_clientdata(client);
         int temp = simple_strtol(buf, NULL, 10) / 1000;
-        temp = encode_temp(data, temp);
+        temp = encode_temp(data->temp_twos_complement, temp);
 
         mutex_lock(&data->lock);
         data->temp_tmax[attr->index] = temp;
@@ -701,8 +701,9 @@ static ssize_t show_temp_tmin(struct device *dev,
 {
         struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
         struct adt7473_data *data = adt7473_update_device(dev);
-        return sprintf(buf, "%d\n",
-                       1000 * decode_temp(data, data->temp_tmin[attr->index]));
+        return sprintf(buf, "%d\n", 1000 * decode_temp(
+                                                data->temp_twos_complement,
+                                                data->temp_tmin[attr->index]));
 }
 
 static ssize_t set_temp_tmin(struct device *dev,
@@ -714,7 +715,7 @@ static ssize_t set_temp_tmin(struct device *dev,
         struct i2c_client *client = to_i2c_client(dev);
         struct adt7473_data *data = i2c_get_clientdata(client);
         int temp = simple_strtol(buf, NULL, 10) / 1000;
-        temp = encode_temp(data, temp);
+        temp = encode_temp(data->temp_twos_complement, temp);
 
         mutex_lock(&data->lock);
         data->temp_tmin[attr->index] = temp;
diff --git a/drivers/hwmon/asb100.c b/drivers/hwmon/asb100.c
index 84712a22acea..fe2eea4d799b 100644
--- a/drivers/hwmon/asb100.c
+++ b/drivers/hwmon/asb100.c
@@ -953,12 +953,8 @@ static void asb100_write_value(struct i2c_client *client, u16 reg, u16 value)
 static void asb100_init_client(struct i2c_client *client)
 {
         struct asb100_data *data = i2c_get_clientdata(client);
-        int vid = 0;
 
-        vid = asb100_read_value(client, ASB100_REG_VID_FANDIV) & 0x0f;
-        vid |= (asb100_read_value(client, ASB100_REG_CHIPID) & 0x01) << 4;
         data->vrm = vid_which_vrm();
-        vid = vid_from_reg(vid, data->vrm);
 
         /* Start monitoring */
         asb100_write_value(client, ASB100_REG_CONFIG,
diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c
index 115f4090b98e..fa7696905154 100644
--- a/drivers/hwmon/lm75.c
+++ b/drivers/hwmon/lm75.c
@@ -248,7 +248,7 @@ static int lm75_detach_client(struct i2c_client *client)
 
 /* All registers are word-sized, except for the configuration register.
    LM75 uses a high-byte first convention, which is exactly opposite to
-   the usual practice. */
+   the SMBus standard. */
 static int lm75_read_value(struct i2c_client *client, u8 reg)
 {
         if (reg == LM75_REG_CONF)
@@ -257,9 +257,6 @@ static int lm75_read_value(struct i2c_client *client, u8 reg)
                 return swab16(i2c_smbus_read_word_data(client, reg));
 }
 
-/* All registers are word-sized, except for the configuration register.
-   LM75 uses a high-byte first convention, which is exactly opposite to
-   the usual practice. */
 static int lm75_write_value(struct i2c_client *client, u8 reg, u16 value)
 {
         if (reg == LM75_REG_CONF)
diff --git a/drivers/hwmon/smsc47b397.c b/drivers/hwmon/smsc47b397.c
index f61d8f4185b2..eb03544c731c 100644
--- a/drivers/hwmon/smsc47b397.c
+++ b/drivers/hwmon/smsc47b397.c
@@ -335,11 +335,23 @@ exit:
 static int __init smsc47b397_find(unsigned short *addr)
 {
         u8 id, rev;
+        char *name;
 
         superio_enter();
         id = force_id ? force_id : superio_inb(SUPERIO_REG_DEVID);
 
-        if ((id != 0x6f) && (id != 0x81) && (id != 0x85)) {
+        switch(id) {
+        case 0x81:
+                name = "SCH5307-NS";
+                break;
+        case 0x6f:
+                name = "LPC47B397-NC";
+                break;
+        case 0x85:
+        case 0x8c:
+                name = "SCH5317";
+                break;
+        default:
                 superio_exit();
                 return -ENODEV;
         }
@@ -352,8 +364,7 @@ static int __init smsc47b397_find(unsigned short *addr)
 
         printk(KERN_INFO DRVNAME ": found SMSC %s "
                 "(base address 0x%04x, revision %u)\n",
-                id == 0x81 ? "SCH5307-NS" : id == 0x85 ? "SCH5317" :
-               "LPC47B397-NC", *addr, rev);
+                name, *addr, rev);
 
         superio_exit();
         return 0;
diff --git a/drivers/hwmon/w83793.c b/drivers/hwmon/w83793.c
index ee35af93b574..ed3c019b78c7 100644
--- a/drivers/hwmon/w83793.c
+++ b/drivers/hwmon/w83793.c
@@ -1024,10 +1024,9 @@ static struct sensor_device_attribute_2 w83793_vid[] = {
         SENSOR_ATTR_2(cpu0_vid, S_IRUGO, show_vid, NULL, NOT_USED, 0),
         SENSOR_ATTR_2(cpu1_vid, S_IRUGO, show_vid, NULL, NOT_USED, 1),
 };
+static DEVICE_ATTR(vrm, S_IWUSR | S_IRUGO, show_vrm, store_vrm);
 
 static struct sensor_device_attribute_2 sda_single_files[] = {
-        SENSOR_ATTR_2(vrm, S_IWUSR | S_IRUGO, show_vrm, store_vrm,
-                      NOT_USED, NOT_USED),
         SENSOR_ATTR_2(chassis, S_IWUSR | S_IRUGO, show_alarm_beep,
                       store_chassis_clear, ALARM_STATUS, 30),
         SENSOR_ATTR_2(beep_enable, S_IWUSR | S_IRUGO, show_beep_enable,
@@ -1080,6 +1079,7 @@ static int w83793_detach_client(struct i2c_client *client)
 
                 for (i = 0; i < ARRAY_SIZE(w83793_vid); i++)
                         device_remove_file(dev, &w83793_vid[i].dev_attr);
+                device_remove_file(dev, &dev_attr_vrm);
 
                 for (i = 0; i < ARRAY_SIZE(w83793_left_fan); i++)
                         device_remove_file(dev, &w83793_left_fan[i].dev_attr);
@@ -1282,7 +1282,6 @@ static int w83793_detect(struct i2c_adapter *adapter, int address, int kind)
         /* Initialize the chip */
         w83793_init_client(client);
 
-        data->vrm = vid_which_vrm();
         /*
            Only fan 1-5 has their own input pins,
            Pwm 1-3 has their own pins
@@ -1293,7 +1292,9 @@ static int w83793_detect(struct i2c_adapter *adapter, int address, int kind)
         val = w83793_read_value(client, W83793_REG_FANIN_CTRL);
 
         /* check the function of pins 49-56 */
-        if (!(tmp & 0x80)) {
+        if (tmp & 0x80) {
+                data->has_vid |= 0x2;   /* has VIDB */
+        } else {
                 data->has_pwm |= 0x18;  /* pwm 4,5 */
                 if (val & 0x01) {       /* fan 6 */
                         data->has_fan |= 0x20;
@@ -1309,13 +1310,15 @@ static int w83793_detect(struct i2c_adapter *adapter, int address, int kind)
                 }
         }
 
+        /* check the function of pins 37-40 */
+        if (!(tmp & 0x29))
+                data->has_vid |= 0x1;   /* has VIDA */
         if (0x08 == (tmp & 0x0c)) {
                 if (val & 0x08) /* fan 9 */
                         data->has_fan |= 0x100;
                 if (val & 0x10) /* fan 10 */
                         data->has_fan |= 0x200;
         }
-
         if (0x20 == (tmp & 0x30)) {
                 if (val & 0x20) /* fan 11 */
                         data->has_fan |= 0x400;
@@ -1359,13 +1362,6 @@ static int w83793_detect(struct i2c_adapter *adapter, int address, int kind)
         if (tmp & 0x02)
                 data->has_temp |= 0x20;
 
-        /* Detect the VID usage and ignore unused input */
-        tmp = w83793_read_value(client, W83793_REG_MFC);
-        if (!(tmp & 0x29))
-                data->has_vid |= 0x1;   /* has VIDA */
-        if (tmp & 0x80)
-                data->has_vid |= 0x2;   /* has VIDB */
-
         /* Register sysfs hooks */
         for (i = 0; i < ARRAY_SIZE(w83793_sensor_attr_2); i++) {
                 err = device_create_file(dev,
@@ -1381,6 +1377,12 @@ static int w83793_detect(struct i2c_adapter *adapter, int address, int kind)
                 if (err)
                         goto exit_remove;
         }
+        if (data->has_vid) {
+                data->vrm = vid_which_vrm();
+                err = device_create_file(dev, &dev_attr_vrm);
+                if (err)
+                        goto exit_remove;
+        }
 
         for (i = 0; i < ARRAY_SIZE(sda_single_files); i++) {
                 err = device_create_file(dev, &sda_single_files[i].dev_attr);
diff --git a/drivers/hwmon/w83l785ts.c b/drivers/hwmon/w83l785ts.c
index 77f2d482888b..52e268e25dab 100644
--- a/drivers/hwmon/w83l785ts.c
+++ b/drivers/hwmon/w83l785ts.c
@@ -301,8 +301,8 @@ static u8 w83l785ts_read_value(struct i2c_client *client, u8 reg, u8 defval)
                 msleep(i);
         }
 
-        dev_err(&client->dev, "Couldn't read value from register 0x%02x. "
-                "Please report.\n", reg);
+        dev_err(&client->dev, "Couldn't read value from register 0x%02x.\n",
+                reg);
         return defval;
 }
 
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 099a0fe1745b..34b0d4f26b58 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -1347,19 +1347,14 @@ static void ide_init_port(ide_hwif_t *hwif, unsigned int port,
             (d->host_flags & IDE_HFLAG_FORCE_LEGACY_IRQS))
                 hwif->irq = port ? 15 : 14;
 
-        hwif->host_flags = d->host_flags;
+        /* ->host_flags may be set by ->init_iops (or even earlier...) */
+        hwif->host_flags |= d->host_flags;
         hwif->pio_mask = d->pio_mask;
 
         /* ->set_pio_mode for DTC2278 is currently limited to port 0 */
         if (hwif->chipset != ide_dtc2278 || hwif->channel == 0)
                 hwif->port_ops = d->port_ops;
 
-        if ((d->host_flags & IDE_HFLAG_SERIALIZE) ||
-            ((d->host_flags & IDE_HFLAG_SERIALIZE_DMA) && hwif->dma_base)) {
-                if (hwif->mate)
-                        hwif->mate->serialized = hwif->serialized = 1;
-        }
-
         hwif->swdma_mask = d->swdma_mask;
         hwif->mwdma_mask = d->mwdma_mask;
         hwif->ultra_mask = d->udma_mask;
@@ -1381,6 +1376,12 @@ static void ide_init_port(ide_hwif_t *hwif, unsigned int port,
                         hwif->dma_ops = d->dma_ops;
         }
 
+        if ((d->host_flags & IDE_HFLAG_SERIALIZE) ||
+            ((d->host_flags & IDE_HFLAG_SERIALIZE_DMA) && hwif->dma_base)) {
+                if (hwif->mate)
+                        hwif->mate->serialized = hwif->serialized = 1;
+        }
+
         if (d->host_flags & IDE_HFLAG_RQSIZE_256)
                 hwif->rqsize = 256;
 
diff --git a/drivers/ide/legacy/falconide.c b/drivers/ide/legacy/falconide.c
index 83555ca513b5..9e449a0c623f 100644
--- a/drivers/ide/legacy/falconide.c
+++ b/drivers/ide/legacy/falconide.c
@@ -61,7 +61,7 @@ static void falconide_output_data(ide_drive_t *drive, struct request *rq,
         unsigned long data_addr = drive->hwif->io_ports.data_addr;
 
         if (drive->media == ide_disk && rq && rq->cmd_type == REQ_TYPE_FS)
-                return outsw(data_adr, buf, (len + 1) / 2);
+                return outsw(data_addr, buf, (len + 1) / 2);
 
         outsw_swapw(data_addr, buf, (len + 1) / 2);
 }
diff --git a/drivers/ieee1394/nodemgr.c b/drivers/ieee1394/nodemgr.c
index 29d833e71cbf..05710c7c1220 100644
--- a/drivers/ieee1394/nodemgr.c
+++ b/drivers/ieee1394/nodemgr.c
@@ -520,8 +520,11 @@ static ssize_t fw_show_drv_device_ids(struct device_driver *drv, char *buf)
         char *scratch = buf;
 
         driver = container_of(drv, struct hpsb_protocol_driver, driver);
+        id = driver->id_table;
+        if (!id)
+                return 0;
 
-        for (id = driver->id_table; id->match_flags != 0; id++) {
+        for (; id->match_flags != 0; id++) {
                 int need_coma = 0;
 
                 if (id->match_flags & IEEE1394_MATCH_VENDOR_ID) {
diff --git a/drivers/infiniband/hw/cxgb3/cxio_hal.c b/drivers/infiniband/hw/cxgb3/cxio_hal.c
index ed2ee4ba4b7c..5fd8506a8657 100644
--- a/drivers/infiniband/hw/cxgb3/cxio_hal.c
+++ b/drivers/infiniband/hw/cxgb3/cxio_hal.c
@@ -359,9 +359,10 @@ static void insert_recv_cqe(struct t3_wq *wq, struct t3_cq *cq)
         cq->sw_wptr++;
 }
 
-void cxio_flush_rq(struct t3_wq *wq, struct t3_cq *cq, int count)
+int cxio_flush_rq(struct t3_wq *wq, struct t3_cq *cq, int count)
 {
         u32 ptr;
+        int flushed = 0;
 
         PDBG("%s wq %p cq %p\n", __func__, wq, cq);
 
@@ -369,8 +370,11 @@ void cxio_flush_rq(struct t3_wq *wq, struct t3_cq *cq, int count)
         PDBG("%s rq_rptr %u rq_wptr %u skip count %u\n", __func__,
             wq->rq_rptr, wq->rq_wptr, count);
         ptr = wq->rq_rptr + count;
-        while (ptr++ != wq->rq_wptr)
+        while (ptr++ != wq->rq_wptr) {
                 insert_recv_cqe(wq, cq);
+                flushed++;
+        }
+        return flushed;
 }
 
 static void insert_sq_cqe(struct t3_wq *wq, struct t3_cq *cq,
@@ -394,9 +398,10 @@ static void insert_sq_cqe(struct t3_wq *wq, struct t3_cq *cq,
         cq->sw_wptr++;
 }
 
-void cxio_flush_sq(struct t3_wq *wq, struct t3_cq *cq, int count)
+int cxio_flush_sq(struct t3_wq *wq, struct t3_cq *cq, int count)
 {
         __u32 ptr;
+        int flushed = 0;
         struct t3_swsq *sqp = wq->sq + Q_PTR2IDX(wq->sq_rptr, wq->sq_size_log2);
 
         ptr = wq->sq_rptr + count;
@@ -405,7 +410,9 @@ void cxio_flush_sq(struct t3_wq *wq, struct t3_cq *cq, int count)
                 insert_sq_cqe(wq, cq, sqp);
                 sqp++;
                 ptr++;
+                flushed++;
         }
+        return flushed;
 }
 
 /*
diff --git a/drivers/infiniband/hw/cxgb3/cxio_hal.h b/drivers/infiniband/hw/cxgb3/cxio_hal.h
index 2bcff7f5046e..69ab08ebc680 100644
--- a/drivers/infiniband/hw/cxgb3/cxio_hal.h
+++ b/drivers/infiniband/hw/cxgb3/cxio_hal.h
@@ -173,8 +173,8 @@ u32 cxio_hal_get_pdid(struct cxio_hal_resource *rscp);
 void cxio_hal_put_pdid(struct cxio_hal_resource *rscp, u32 pdid);
 int __init cxio_hal_init(void);
 void __exit cxio_hal_exit(void);
-void cxio_flush_rq(struct t3_wq *wq, struct t3_cq *cq, int count);
-void cxio_flush_sq(struct t3_wq *wq, struct t3_cq *cq, int count);
+int cxio_flush_rq(struct t3_wq *wq, struct t3_cq *cq, int count);
+int cxio_flush_sq(struct t3_wq *wq, struct t3_cq *cq, int count);
 void cxio_count_rcqes(struct t3_cq *cq, struct t3_wq *wq, int *count);
 void cxio_count_scqes(struct t3_cq *cq, struct t3_wq *wq, int *count);
 void cxio_flush_hw_cq(struct t3_cq *cq);
diff --git a/drivers/infiniband/hw/cxgb3/iwch_cm.c b/drivers/infiniband/hw/cxgb3/iwch_cm.c
index d44a6df9ad8c..c325c44807e8 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_cm.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_cm.c
@@ -67,10 +67,10 @@ int peer2peer = 0;
 module_param(peer2peer, int, 0644);
 MODULE_PARM_DESC(peer2peer, "Support peer2peer ULPs (default=0)");
 
-static int ep_timeout_secs = 10;
+static int ep_timeout_secs = 60;
 module_param(ep_timeout_secs, int, 0644);
 MODULE_PARM_DESC(ep_timeout_secs, "CM Endpoint operation timeout "
-                                   "in seconds (default=10)");
+                                   "in seconds (default=60)");
 
 static int mpa_rev = 1;
 module_param(mpa_rev, int, 0644);
@@ -1650,8 +1650,8 @@ static int close_con_rpl(struct t3cdev *tdev, struct sk_buff *skb, void *ctx)
                 release = 1;
                 break;
         case ABORTING:
-                break;
         case DEAD:
+                break;
         default:
                 BUG_ON(1);
                 break;
diff --git a/drivers/infiniband/hw/cxgb3/iwch_qp.c b/drivers/infiniband/hw/cxgb3/iwch_qp.c
index 9b4be889c58e..79dbe5beae52 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_qp.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_qp.c
@@ -655,6 +655,7 @@ static void __flush_qp(struct iwch_qp *qhp, unsigned long *flag)
 {
         struct iwch_cq *rchp, *schp;
         int count;
+        int flushed;
 
         rchp = get_chp(qhp->rhp, qhp->attr.rcq);
         schp = get_chp(qhp->rhp, qhp->attr.scq);
@@ -669,20 +670,22 @@ static void __flush_qp(struct iwch_qp *qhp, unsigned long *flag)
         spin_lock(&qhp->lock);
         cxio_flush_hw_cq(&rchp->cq);
         cxio_count_rcqes(&rchp->cq, &qhp->wq, &count);
-        cxio_flush_rq(&qhp->wq, &rchp->cq, count);
+        flushed = cxio_flush_rq(&qhp->wq, &rchp->cq, count);
         spin_unlock(&qhp->lock);
         spin_unlock_irqrestore(&rchp->lock, *flag);
-        (*rchp->ibcq.comp_handler)(&rchp->ibcq, rchp->ibcq.cq_context);
+        if (flushed)
+                (*rchp->ibcq.comp_handler)(&rchp->ibcq, rchp->ibcq.cq_context);
 
         /* locking heirarchy: cq lock first, then qp lock. */
         spin_lock_irqsave(&schp->lock, *flag);
         spin_lock(&qhp->lock);
         cxio_flush_hw_cq(&schp->cq);
         cxio_count_scqes(&schp->cq, &qhp->wq, &count);
-        cxio_flush_sq(&qhp->wq, &schp->cq, count);
+        flushed = cxio_flush_sq(&qhp->wq, &schp->cq, count);
         spin_unlock(&qhp->lock);
         spin_unlock_irqrestore(&schp->lock, *flag);
-        (*schp->ibcq.comp_handler)(&schp->ibcq, schp->ibcq.cq_context);
+        if (flushed)
+                (*schp->ibcq.comp_handler)(&schp->ibcq, schp->ibcq.cq_context);
 
         /* deref */
         if (atomic_dec_and_test(&qhp->refcnt))
@@ -880,7 +883,6 @@ int iwch_modify_qp(struct iwch_dev *rhp, struct iwch_qp *qhp,
                                 ep = qhp->ep;
                                 get_ep(&ep->com);
                         }
-                        flush_qp(qhp, &flag);
                         break;
                 case IWCH_QP_STATE_TERMINATE:
                         qhp->attr.state = IWCH_QP_STATE_TERMINATE;
@@ -911,6 +913,7 @@ int iwch_modify_qp(struct iwch_dev *rhp, struct iwch_qp *qhp,
                 }
                 switch (attrs->next_state) {
                         case IWCH_QP_STATE_IDLE:
+                                flush_qp(qhp, &flag);
                                 qhp->attr.state = IWCH_QP_STATE_IDLE;
                                 qhp->attr.llp_stream_handle = NULL;
                                 put_ep(&qhp->ep->com);
diff --git a/drivers/infiniband/hw/ehca/ehca_hca.c b/drivers/infiniband/hw/ehca/ehca_hca.c
index 2515cbde7e65..bc3b37d2070f 100644
--- a/drivers/infiniband/hw/ehca/ehca_hca.c
+++ b/drivers/infiniband/hw/ehca/ehca_hca.c
@@ -101,7 +101,6 @@ int ehca_query_device(struct ib_device *ibdev, struct ib_device_attr *props)
         props->max_ee          = limit_uint(rblock->max_rd_ee_context);
         props->max_rdd         = limit_uint(rblock->max_rd_domain);
         props->max_fmr         = limit_uint(rblock->max_mr);
-        props->local_ca_ack_delay  = limit_uint(rblock->local_ca_ack_delay);
         props->max_qp_rd_atom  = limit_uint(rblock->max_rr_qp);
         props->max_ee_rd_atom  = limit_uint(rblock->max_rr_ee_context);
         props->max_res_rd_atom = limit_uint(rblock->max_rr_hca);
@@ -115,7 +114,7 @@ int ehca_query_device(struct ib_device *ibdev, struct ib_device_attr *props)
         }
 
         props->max_pkeys           = 16;
-        props->local_ca_ack_delay  = limit_uint(rblock->local_ca_ack_delay);
+        props->local_ca_ack_delay  = min_t(u8, rblock->local_ca_ack_delay, 255);
         props->max_raw_ipv6_qp     = limit_uint(rblock->max_raw_ipv6_qp);
         props->max_raw_ethy_qp     = limit_uint(rblock->max_raw_ethy_qp);
         props->max_mcast_grp       = limit_uint(rblock->max_mcast_grp);
@@ -136,7 +135,7 @@ query_device1:
         return ret;
 }
 
-static int map_mtu(struct ehca_shca *shca, u32 fw_mtu)
+static enum ib_mtu map_mtu(struct ehca_shca *shca, u32 fw_mtu)
 {
         switch (fw_mtu) {
         case 0x1:
@@ -156,7 +155,7 @@ static int map_mtu(struct ehca_shca *shca, u32 fw_mtu)
         }
 }
 
-static int map_number_of_vls(struct ehca_shca *shca, u32 vl_cap)
+static u8 map_number_of_vls(struct ehca_shca *shca, u32 vl_cap)
 {
         switch (vl_cap) {
         case 0x1:
diff --git a/drivers/infiniband/hw/mlx4/cq.c b/drivers/infiniband/hw/mlx4/cq.c
index 2f199c5c4a72..4521319b1406 100644
--- a/drivers/infiniband/hw/mlx4/cq.c
+++ b/drivers/infiniband/hw/mlx4/cq.c
@@ -246,7 +246,7 @@ err_mtt:
         if (context)
                 ib_umem_release(cq->umem);
         else
-                mlx4_ib_free_cq_buf(dev, &cq->buf, entries);
+                mlx4_ib_free_cq_buf(dev, &cq->buf, cq->ibcq.cqe);
 
 err_db:
         if (!context)
@@ -434,7 +434,7 @@ int mlx4_ib_destroy_cq(struct ib_cq *cq)
                 mlx4_ib_db_unmap_user(to_mucontext(cq->uobject->context), &mcq->db);
                 ib_umem_release(mcq->umem);
         } else {
-                mlx4_ib_free_cq_buf(dev, &mcq->buf, cq->cqe + 1);
+                mlx4_ib_free_cq_buf(dev, &mcq->buf, cq->cqe);
                 mlx4_db_free(dev->dev, &mcq->db);
         }
 
diff --git a/drivers/infiniband/ulp/ipoib/ipoib.h b/drivers/infiniband/ulp/ipoib/ipoib.h
index 9044f8803532..ca126fc2b853 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib.h
+++ b/drivers/infiniband/ulp/ipoib/ipoib.h
@@ -334,6 +334,7 @@ struct ipoib_dev_priv {
 #endif
         int     hca_caps;
         struct ipoib_ethtool_st ethtool;
+        struct timer_list poll_timer;
 };
 
 struct ipoib_ah {
@@ -404,6 +405,7 @@ extern struct workqueue_struct *ipoib_workqueue;
 
 int ipoib_poll(struct napi_struct *napi, int budget);
 void ipoib_ib_completion(struct ib_cq *cq, void *dev_ptr);
+void ipoib_send_comp_handler(struct ib_cq *cq, void *dev_ptr);
 
 struct ipoib_ah *ipoib_create_ah(struct net_device *dev,
                                  struct ib_pd *pd, struct ib_ah_attr *attr);
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_ib.c b/drivers/infiniband/ulp/ipoib/ipoib_ib.c
index 97b815c1a3fc..f429bce24c20 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_ib.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_ib.c
@@ -461,6 +461,26 @@ void ipoib_ib_completion(struct ib_cq *cq, void *dev_ptr)
         netif_rx_schedule(dev, &priv->napi);
 }
 
+static void drain_tx_cq(struct net_device *dev)
+{
+        struct ipoib_dev_priv *priv = netdev_priv(dev);
+        unsigned long flags;
+
+        spin_lock_irqsave(&priv->tx_lock, flags);
+        while (poll_tx(priv))
+                ; /* nothing */
+
+        if (netif_queue_stopped(dev))
+                mod_timer(&priv->poll_timer, jiffies + 1);
+
+        spin_unlock_irqrestore(&priv->tx_lock, flags);
+}
+
+void ipoib_send_comp_handler(struct ib_cq *cq, void *dev_ptr)
+{
+        drain_tx_cq((struct net_device *)dev_ptr);
+}
+
 static inline int post_send(struct ipoib_dev_priv *priv,
                             unsigned int wr_id,
                             struct ib_ah *address, u32 qpn,
@@ -555,12 +575,22 @@ void ipoib_send(struct net_device *dev, struct sk_buff *skb,
         else
                 priv->tx_wr.send_flags &= ~IB_SEND_IP_CSUM;
 
+        if (++priv->tx_outstanding == ipoib_sendq_size) {
+                ipoib_dbg(priv, "TX ring full, stopping kernel net queue\n");
+                if (ib_req_notify_cq(priv->send_cq, IB_CQ_NEXT_COMP))
+                        ipoib_warn(priv, "request notify on send CQ failed\n");
+                netif_stop_queue(dev);
+        }
+
         if (unlikely(post_send(priv, priv->tx_head & (ipoib_sendq_size - 1),
                                address->ah, qpn, tx_req, phead, hlen))) {
                 ipoib_warn(priv, "post_send failed\n");
                 ++dev->stats.tx_errors;
+                --priv->tx_outstanding;
                 ipoib_dma_unmap_tx(priv->ca, tx_req);
                 dev_kfree_skb_any(skb);
+                if (netif_queue_stopped(dev))
+                        netif_wake_queue(dev);
         } else {
                 dev->trans_start = jiffies;
 
@@ -568,14 +598,11 @@ void ipoib_send(struct net_device *dev, struct sk_buff *skb,
                 ++priv->tx_head;
                 skb_orphan(skb);
 
-                if (++priv->tx_outstanding == ipoib_sendq_size) {
-                        ipoib_dbg(priv, "TX ring full, stopping kernel net queue\n");
-                        netif_stop_queue(dev);
-                }
         }
 
         if (unlikely(priv->tx_outstanding > MAX_SEND_CQE))
-                poll_tx(priv);
+                while (poll_tx(priv))
+                        ; /* nothing */
 }
 
 static void __ipoib_reap_ah(struct net_device *dev)
@@ -609,6 +636,11 @@ void ipoib_reap_ah(struct work_struct *work)
                                    round_jiffies_relative(HZ));
 }
 
+static void ipoib_ib_tx_timer_func(unsigned long ctx)
+{
+        drain_tx_cq((struct net_device *)ctx);
+}
+
 int ipoib_ib_dev_open(struct net_device *dev)
 {
         struct ipoib_dev_priv *priv = netdev_priv(dev);
@@ -645,6 +677,10 @@ int ipoib_ib_dev_open(struct net_device *dev)
         queue_delayed_work(ipoib_workqueue, &priv->ah_reap_task,
                            round_jiffies_relative(HZ));
 
+        init_timer(&priv->poll_timer);
+        priv->poll_timer.function = ipoib_ib_tx_timer_func;
+        priv->poll_timer.data = (unsigned long)dev;
+
         set_bit(IPOIB_FLAG_INITIALIZED, &priv->flags);
 
         return 0;
@@ -810,6 +846,7 @@ int ipoib_ib_dev_stop(struct net_device *dev, int flush)
         ipoib_dbg(priv, "All sends and receives done.\n");
 
 timeout:
+        del_timer_sync(&priv->poll_timer);
         qp_attr.qp_state = IB_QPS_RESET;
         if (ib_modify_qp(priv->qp, &qp_attr, IB_QP_STATE))
                 ipoib_warn(priv, "Failed to modify QP to RESET state\n");
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_verbs.c b/drivers/infiniband/ulp/ipoib/ipoib_verbs.c
index c1e7ece1fd44..8766d29ce3b7 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_verbs.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_verbs.c
@@ -187,7 +187,8 @@ int ipoib_transport_dev_init(struct net_device *dev, struct ib_device *ca)
                 goto out_free_mr;
         }
 
-        priv->send_cq = ib_create_cq(priv->ca, NULL, NULL, dev, ipoib_sendq_size, 0);
+        priv->send_cq = ib_create_cq(priv->ca, ipoib_send_comp_handler, NULL,
+                                     dev, ipoib_sendq_size, 0);
         if (IS_ERR(priv->send_cq)) {
                 printk(KERN_WARNING "%s: failed to create send CQ\n", ca->name);
                 goto out_free_recv_cq;
diff --git a/drivers/input/serio/hp_sdc.c b/drivers/input/serio/hp_sdc.c
index 02b3ad8c0826..edfedd9a166c 100644
--- a/drivers/input/serio/hp_sdc.c
+++ b/drivers/input/serio/hp_sdc.c
@@ -69,6 +69,7 @@
 #include <linux/time.h>
 #include <linux/slab.h>
 #include <linux/hil.h>
+#include <linux/semaphore.h>
 #include <asm/io.h>
 #include <asm/system.h>
 
diff --git a/drivers/isdn/hysdn/hysdn_procconf.c b/drivers/isdn/hysdn/hysdn_procconf.c
index 877be9922c3d..15906d005b05 100644
--- a/drivers/isdn/hysdn/hysdn_procconf.c
+++ b/drivers/isdn/hysdn/hysdn_procconf.c
@@ -405,7 +405,8 @@ hysdn_procconf_init(void)
                 sprintf(conf_name, "%s%d", PROC_CONF_BASENAME, card->myid);
                 if ((card->procconf = (void *) proc_create(conf_name,
                                                 S_IFREG | S_IRUGO | S_IWUSR,
-                                                hysdn_proc_entry)) != NULL) {
+                                                hysdn_proc_entry,
+                                                &conf_fops)) != NULL) {
                         hysdn_proclog_init(card);       /* init the log file entry */
                 }
                 card = card->next;      /* next entry */
diff --git a/drivers/lguest/lguest_device.c b/drivers/lguest/lguest_device.c
index 2bc9bf7e88e5..8080249957af 100644
--- a/drivers/lguest/lguest_device.c
+++ b/drivers/lguest/lguest_device.c
@@ -85,27 +85,34 @@ static unsigned desc_size(const struct lguest_device_desc *desc)
                 + desc->config_len;
 }
 
-/* This tests (and acknowleges) a feature bit. */
-static bool lg_feature(struct virtio_device *vdev, unsigned fbit)
+/* This gets the device's feature bits. */
+static u32 lg_get_features(struct virtio_device *vdev)
 {
+        unsigned int i;
+        u32 features = 0;
         struct lguest_device_desc *desc = to_lgdev(vdev)->desc;
-        u8 *features;
-
-        /* Obviously if they ask for a feature off the end of our feature
-         * bitmap, it's not set. */
-        if (fbit / 8 > desc->feature_len)
-                return false;
-
-        /* The feature bitmap comes after the virtqueues. */
-        features = lg_features(desc);
-        if (!(features[fbit / 8] & (1 << (fbit % 8))))
-                return false;
-
-        /* We set the matching bit in the other half of the bitmap to tell the
-         * Host we want to use this feature.  We don't use this yet, but we
-         * could in future. */
-        features[desc->feature_len + fbit / 8] |= (1 << (fbit % 8));
-        return true;
+        u8 *in_features = lg_features(desc);
+
+        /* We do this the slow but generic way. */
+        for (i = 0; i < min(desc->feature_len * 8, 32); i++)
+                if (in_features[i / 8] & (1 << (i % 8)))
+                        features |= (1 << i);
+
+        return features;
+}
+
+static void lg_set_features(struct virtio_device *vdev, u32 features)
+{
+        unsigned int i;
+        struct lguest_device_desc *desc = to_lgdev(vdev)->desc;
+        /* Second half of bitmap is features we accept. */
+        u8 *out_features = lg_features(desc) + desc->feature_len;
+
+        memset(out_features, 0, desc->feature_len);
+        for (i = 0; i < min(desc->feature_len * 8, 32); i++) {
+                if (features & (1 << i))
+                        out_features[i / 8] |= (1 << (i % 8));
+        }
 }
 
 /* Once they've found a field, getting a copy of it is easy. */
@@ -137,20 +144,26 @@ static u8 lg_get_status(struct virtio_device *vdev)
         return to_lgdev(vdev)->desc->status;
 }
 
+/* To notify on status updates, we (ab)use the NOTIFY hypercall, with the
+ * descriptor address of the device.  A zero status means "reset". */
+static void set_status(struct virtio_device *vdev, u8 status)
+{
+        unsigned long offset = (void *)to_lgdev(vdev)->desc - lguest_devices;
+
+        /* We set the status. */
+        to_lgdev(vdev)->desc->status = status;
+        hcall(LHCALL_NOTIFY, (max_pfn<<PAGE_SHIFT) + offset, 0, 0);
+}
+
 static void lg_set_status(struct virtio_device *vdev, u8 status)
 {
         BUG_ON(!status);
-        to_lgdev(vdev)->desc->status = status;
+        set_status(vdev, status);
 }
 
-/* To reset the device, we (ab)use the NOTIFY hypercall, with the descriptor
- * address of the device.  The Host will zero the status and all the
- * features. */
 static void lg_reset(struct virtio_device *vdev)
 {
-        unsigned long offset = (void *)to_lgdev(vdev)->desc - lguest_devices;
-
-        hcall(LHCALL_NOTIFY, (max_pfn<<PAGE_SHIFT) + offset, 0, 0);
+        set_status(vdev, 0);
 }
 
 /*
@@ -286,7 +299,8 @@ static void lg_del_vq(struct virtqueue *vq)
 
 /* The ops structure which hooks everything together. */
 static struct virtio_config_ops lguest_config_ops = {
-        .feature = lg_feature,
+        .get_features = lg_get_features,
+        .set_features = lg_set_features,
         .get = lg_get,
         .set = lg_set,
         .get_status = lg_get_status,
diff --git a/drivers/lguest/lguest_user.c b/drivers/lguest/lguest_user.c
index 645e6e040bfb..e73a000473cc 100644
--- a/drivers/lguest/lguest_user.c
+++ b/drivers/lguest/lguest_user.c
@@ -102,7 +102,7 @@ static ssize_t read(struct file *file, char __user *user, size_t size,loff_t*o)
 static int lg_cpu_start(struct lg_cpu *cpu, unsigned id, unsigned long start_ip)
 {
         /* We have a limited number the number of CPUs in the lguest struct. */
-        if (id >= NR_CPUS)
+        if (id >= ARRAY_SIZE(cpu->lg->cpus))
                 return -EINVAL;
 
         /* Set up this CPU's id, and pointer back to the lguest struct. */
@@ -251,8 +251,6 @@ static ssize_t write(struct file *file, const char __user *in,
                 if (!lg || (cpu_id >= lg->nr_cpus))
                         return -EINVAL;
                 cpu = &lg->cpus[cpu_id];
-                if (!cpu)
-                        return -EINVAL;
 
                 /* Once the Guest is dead, you can only read() why it died. */
                 if (lg->dead)
diff --git a/drivers/macintosh/adb.c b/drivers/macintosh/adb.c
index 20978205cd02..b8b9e44f7f4e 100644
--- a/drivers/macintosh/adb.c
+++ b/drivers/macintosh/adb.c
@@ -37,7 +37,7 @@
 #include <linux/device.h>
 #include <linux/kthread.h>
 #include <linux/platform_device.h>
-#include <linux/semaphore.h>
+#include <linux/mutex.h>
 
 #include <asm/uaccess.h>
 #ifdef CONFIG_PPC
@@ -102,7 +102,7 @@ static struct adb_handler {
 } adb_handler[16];
 
 /*
- * The adb_handler_sem mutex protects all accesses to the original_address
+ * The adb_handler_mutex mutex protects all accesses to the original_address
  * and handler_id fields of adb_handler[i] for all i, and changes to the
  * handler field.
  * Accesses to the handler field are protected by the adb_handler_lock
@@ -110,7 +110,7 @@ static struct adb_handler {
  * time adb_unregister returns, we know that the old handler isn't being
  * called.
  */
-static DECLARE_MUTEX(adb_handler_sem);
+static DEFINE_MUTEX(adb_handler_mutex);
 static DEFINE_RWLOCK(adb_handler_lock);
 
 #if 0
@@ -355,7 +355,7 @@ do_adb_reset_bus(void)
                 msleep(500);
         }
 
-        down(&adb_handler_sem);
+        mutex_lock(&adb_handler_mutex);
         write_lock_irq(&adb_handler_lock);
         memset(adb_handler, 0, sizeof(adb_handler));
         write_unlock_irq(&adb_handler_lock);
@@ -376,7 +376,7 @@ do_adb_reset_bus(void)
                 if (adb_controller->autopoll)
                         adb_controller->autopoll(autopoll_devs);
         }
-        up(&adb_handler_sem);
+        mutex_unlock(&adb_handler_mutex);
 
         blocking_notifier_call_chain(&adb_client_list,
                 ADB_MSG_POST_RESET, NULL);
@@ -454,7 +454,7 @@ adb_register(int default_id, int handler_id, struct adb_ids *ids,
 {
         int i;
 
-        down(&adb_handler_sem);
+        mutex_lock(&adb_handler_mutex);
         ids->nids = 0;
         for (i = 1; i < 16; i++) {
                 if ((adb_handler[i].original_address == default_id) &&
@@ -472,7 +472,7 @@ adb_register(int default_id, int handler_id, struct adb_ids *ids,
                         ids->id[ids->nids++] = i;
                 }
         }
-        up(&adb_handler_sem);
+        mutex_unlock(&adb_handler_mutex);
         return ids->nids;
 }
 
@@ -481,7 +481,7 @@ adb_unregister(int index)
 {
         int ret = -ENODEV;
 
-        down(&adb_handler_sem);
+        mutex_lock(&adb_handler_mutex);
         write_lock_irq(&adb_handler_lock);
         if (adb_handler[index].handler) {
                 while(adb_handler[index].busy) {
@@ -493,7 +493,7 @@ adb_unregister(int index)
                 adb_handler[index].handler = NULL;
         }
         write_unlock_irq(&adb_handler_lock);
-        up(&adb_handler_sem);
+        mutex_unlock(&adb_handler_mutex);
         return ret;
 }
 
@@ -557,19 +557,19 @@ adb_try_handler_change(int address, int new_id)
 {
         int ret;
 
-        down(&adb_handler_sem);
+        mutex_lock(&adb_handler_mutex);
         ret = try_handler_change(address, new_id);
-        up(&adb_handler_sem);
+        mutex_unlock(&adb_handler_mutex);
         return ret;
 }
 
 int
 adb_get_infos(int address, int *original_address, int *handler_id)
 {
-        down(&adb_handler_sem);
+        mutex_lock(&adb_handler_mutex);
         *original_address = adb_handler[address].original_address;
         *handler_id = adb_handler[address].handler_id;
-        up(&adb_handler_sem);
+        mutex_unlock(&adb_handler_mutex);
 
         return (*original_address != 0);
 }
@@ -628,10 +628,10 @@ do_adb_query(struct adb_request *req)
         case ADB_QUERY_GETDEVINFO:
                 if (req->nbytes < 3)
                         break;
-                down(&adb_handler_sem);
+                mutex_lock(&adb_handler_mutex);
                 req->reply[0] = adb_handler[req->data[2]].original_address;
                 req->reply[1] = adb_handler[req->data[2]].handler_id;
-                up(&adb_handler_sem);
+                mutex_unlock(&adb_handler_mutex);
                 req->complete = 1;
                 req->reply_len = 2;
                 adb_write_done(req);
diff --git a/drivers/macintosh/therm_pm72.c b/drivers/macintosh/therm_pm72.c
index 1e0a69a5e815..ddfb426a9abd 100644
--- a/drivers/macintosh/therm_pm72.c
+++ b/drivers/macintosh/therm_pm72.c
@@ -122,6 +122,7 @@
 #include <linux/kmod.h>
 #include <linux/i2c.h>
 #include <linux/kthread.h>
+#include <linux/mutex.h>
 #include <asm/prom.h>
 #include <asm/machdep.h>
 #include <asm/io.h>
@@ -169,7 +170,7 @@ static int				rackmac;
 static s32                              dimm_output_clamp;
 static int                              fcu_rpm_shift;
 static int                              fcu_tickle_ticks;
-static DECLARE_MUTEX(driver_lock);
+static DEFINE_MUTEX(driver_lock);
 
 /*
  * We have 3 types of CPU PID control. One is "split" old style control
@@ -729,9 +730,9 @@ static void fetch_cpu_pumps_minmax(void)
 static ssize_t show_##name(struct device *dev, struct device_attribute *attr, char *buf)        \
 {                                                               \
         ssize_t r;                                              \
-        down(&driver_lock);                                     \
+        mutex_lock(&driver_lock);                                       \
         r = sprintf(buf, "%d.%03d", FIX32TOPRINT(data));        \
-        up(&driver_lock);                                       \
+        mutex_unlock(&driver_lock);                                     \
         return r;                                               \
 }
 #define BUILD_SHOW_FUNC_INT(name, data)                         \
@@ -1803,11 +1804,11 @@ static int main_control_loop(void *x)
 {
         DBG("main_control_loop started\n");
 
-        down(&driver_lock);
+        mutex_lock(&driver_lock);
 
         if (start_fcu() < 0) {
                 printk(KERN_ERR "kfand: failed to start FCU\n");
-                up(&driver_lock);
+                mutex_unlock(&driver_lock);
                 goto out;
         }
 
@@ -1822,14 +1823,14 @@ static int main_control_loop(void *x)
 
         fcu_tickle_ticks = FCU_TICKLE_TICKS;
 
-        up(&driver_lock);
+        mutex_unlock(&driver_lock);
 
         while (state == state_attached) {
                 unsigned long elapsed, start;
 
                 start = jiffies;
 
-                down(&driver_lock);
+                mutex_lock(&driver_lock);
 
                 /* Tickle the FCU just in case */
                 if (--fcu_tickle_ticks < 0) {
@@ -1861,7 +1862,7 @@ static int main_control_loop(void *x)
                         do_monitor_slots(&slots_state);
                 else
                         do_monitor_drives(&drives_state);
-                up(&driver_lock);
+                mutex_unlock(&driver_lock);
 
                 if (critical_state == 1) {
                         printk(KERN_WARNING "Temperature control detected a critical condition\n");
@@ -2019,13 +2020,13 @@ static void detach_fcu(void)
  */
 static int therm_pm72_attach(struct i2c_adapter *adapter)
 {
-        down(&driver_lock);
+        mutex_lock(&driver_lock);
 
         /* Check state */
         if (state == state_detached)
                 state = state_attaching;
         if (state != state_attaching) {
-                up(&driver_lock);
+                mutex_unlock(&driver_lock);
                 return 0;
         }
 
@@ -2054,7 +2055,7 @@ static int therm_pm72_attach(struct i2c_adapter *adapter)
                 state = state_attached;
                 start_control_loops();
         }
-        up(&driver_lock);
+        mutex_unlock(&driver_lock);
 
         return 0;
 }
@@ -2065,16 +2066,16 @@ static int therm_pm72_attach(struct i2c_adapter *adapter)
  */
 static int therm_pm72_detach(struct i2c_adapter *adapter)
 {
-        down(&driver_lock);
+        mutex_lock(&driver_lock);
 
         if (state != state_detached)
                 state = state_detaching;
 
         /* Stop control loops if any */
         DBG("stopping control loops\n");
-        up(&driver_lock);
+        mutex_unlock(&driver_lock);
         stop_control_loops();
-        down(&driver_lock);
+        mutex_lock(&driver_lock);
 
         if (u3_0 != NULL && !strcmp(adapter->name, "u3 0")) {
                 DBG("lost U3-0, disposing control loops\n");
@@ -2090,7 +2091,7 @@ static int therm_pm72_detach(struct i2c_adapter *adapter)
         if (u3_0 == NULL && u3_1 == NULL)
                 state = state_detached;
 
-        up(&driver_lock);
+        mutex_unlock(&driver_lock);
 
         return 0;
 }
diff --git a/drivers/macintosh/windfarm_smu_sat.c b/drivers/macintosh/windfarm_smu_sat.c
index 797918d0e59c..7f2be4baaeda 100644
--- a/drivers/macintosh/windfarm_smu_sat.c
+++ b/drivers/macintosh/windfarm_smu_sat.c
@@ -13,7 +13,7 @@
 #include <linux/init.h>
 #include <linux/wait.h>
 #include <linux/i2c.h>
-#include <linux/semaphore.h>
+#include <linux/mutex.h>
 #include <asm/prom.h>
 #include <asm/smu.h>
 #include <asm/pmac_low_i2c.h>
@@ -36,7 +36,7 @@
 struct wf_sat {
         int                     nr;
         atomic_t                refcnt;
-        struct semaphore        mutex;
+        struct mutex            mutex;
         unsigned long           last_read; /* jiffies when cache last updated */
         u8                      cache[16];
         struct i2c_client       i2c;
@@ -163,7 +163,7 @@ static int wf_sat_get(struct wf_sensor *sr, s32 *value)
         if (sat->i2c.adapter == NULL)
                 return -ENODEV;
 
-        down(&sat->mutex);
+        mutex_lock(&sat->mutex);
         if (time_after(jiffies, (sat->last_read + MAX_AGE))) {
                 err = wf_sat_read_cache(sat);
                 if (err)
@@ -182,7 +182,7 @@ static int wf_sat_get(struct wf_sensor *sr, s32 *value)
         err = 0;
 
  fail:
-        up(&sat->mutex);
+        mutex_unlock(&sat->mutex);
         return err;
 }
 
@@ -233,7 +233,7 @@ static void wf_sat_create(struct i2c_adapter *adapter, struct device_node *dev)
         sat->nr = -1;
         sat->node = of_node_get(dev);
         atomic_set(&sat->refcnt, 0);
-        init_MUTEX(&sat->mutex);
+        mutex_init(&sat->mutex);
         sat->i2c.addr = (addr >> 1) & 0x7f;
         sat->i2c.adapter = adapter;
         sat->i2c.driver = &wf_sat_driver;
diff --git a/drivers/misc/kgdbts.c b/drivers/misc/kgdbts.c
index 30a1af857c7a..fa394104339c 100644
--- a/drivers/misc/kgdbts.c
+++ b/drivers/misc/kgdbts.c
@@ -47,6 +47,7 @@
  *       to test the HW NMI watchdog
  * F## = Break at do_fork for ## iterations
  * S## = Break at sys_open for ## iterations
+ * I## = Run the single step test ## iterations
  *
  * NOTE: that the do_fork and sys_open tests are mutually exclusive.
  *
@@ -375,7 +376,7 @@ static void emul_sstep_get(char *arg)
                 break;
         case 1:
                 /* set breakpoint */
-                break_helper("Z0", 0, sstep_addr);
+                break_helper("Z0", NULL, sstep_addr);
                 break;
         case 2:
                 /* Continue */
@@ -383,7 +384,7 @@ static void emul_sstep_get(char *arg)
                 break;
         case 3:
                 /* Clear breakpoint */
-                break_helper("z0", 0, sstep_addr);
+                break_helper("z0", NULL, sstep_addr);
                 break;
         default:
                 eprintk("kgdbts: ERROR failed sstep get emulation\n");
@@ -465,11 +466,11 @@ static struct test_struct sw_breakpoint_test[] = {
         { "?", "S0*" }, /* Clear break points */
         { "kgdbts_break_test", "OK", sw_break, }, /* set sw breakpoint */
         { "c", "T0*", }, /* Continue */
-        { "g", "kgdbts_break_test", 0, check_and_rewind_pc },
+        { "g", "kgdbts_break_test", NULL, check_and_rewind_pc },
         { "write", "OK", write_regs },
         { "kgdbts_break_test", "OK", sw_rem_break }, /*remove breakpoint */
         { "D", "OK" }, /* Detach */
-        { "D", "OK", 0,  got_break }, /* If the test worked we made it here */
+        { "D", "OK", NULL,  got_break }, /* On success we made it here */
         { "", "" },
 };
 
@@ -499,14 +500,14 @@ static struct test_struct singlestep_break_test[] = {
         { "?", "S0*" }, /* Clear break points */
         { "kgdbts_break_test", "OK", sw_break, }, /* set sw breakpoint */
         { "c", "T0*", }, /* Continue */
-        { "g", "kgdbts_break_test", 0, check_and_rewind_pc },
+        { "g", "kgdbts_break_test", NULL, check_and_rewind_pc },
         { "write", "OK", write_regs }, /* Write registers */
         { "kgdbts_break_test", "OK", sw_rem_break }, /*remove breakpoint */
         { "s", "T0*", emul_sstep_get, emul_sstep_put }, /* Single step */
-        { "g", "kgdbts_break_test", 0, check_single_step },
+        { "g", "kgdbts_break_test", NULL, check_single_step },
         { "kgdbts_break_test", "OK", sw_break, }, /* set sw breakpoint */
         { "c", "T0*", }, /* Continue */
-        { "g", "kgdbts_break_test", 0, check_and_rewind_pc },
+        { "g", "kgdbts_break_test", NULL, check_and_rewind_pc },
         { "write", "OK", write_regs }, /* Write registers */
         { "D", "OK" }, /* Remove all breakpoints and continues */
         { "", "" },
@@ -520,14 +521,14 @@ static struct test_struct do_fork_test[] = {
         { "?", "S0*" }, /* Clear break points */
         { "do_fork", "OK", sw_break, }, /* set sw breakpoint */
         { "c", "T0*", }, /* Continue */
-        { "g", "do_fork", 0, check_and_rewind_pc }, /* check location */
+        { "g", "do_fork", NULL, check_and_rewind_pc }, /* check location */
         { "write", "OK", write_regs }, /* Write registers */
         { "do_fork", "OK", sw_rem_break }, /*remove breakpoint */
         { "s", "T0*", emul_sstep_get, emul_sstep_put }, /* Single step */
-        { "g", "do_fork", 0, check_single_step },
+        { "g", "do_fork", NULL, check_single_step },
         { "do_fork", "OK", sw_break, }, /* set sw breakpoint */
         { "7", "T0*", skip_back_repeat_test }, /* Loop based on repeat_test */
-        { "D", "OK", 0, final_ack_set }, /* detach and unregister I/O */
+        { "D", "OK", NULL, final_ack_set }, /* detach and unregister I/O */
         { "", "" },
 };
 
@@ -538,14 +539,14 @@ static struct test_struct sys_open_test[] = {
         { "?", "S0*" }, /* Clear break points */
         { "sys_open", "OK", sw_break, }, /* set sw breakpoint */
         { "c", "T0*", }, /* Continue */
-        { "g", "sys_open", 0, check_and_rewind_pc }, /* check location */
+        { "g", "sys_open", NULL, check_and_rewind_pc }, /* check location */
         { "write", "OK", write_regs }, /* Write registers */
         { "sys_open", "OK", sw_rem_break }, /*remove breakpoint */
         { "s", "T0*", emul_sstep_get, emul_sstep_put }, /* Single step */
-        { "g", "sys_open", 0, check_single_step },
+        { "g", "sys_open", NULL, check_single_step },
         { "sys_open", "OK", sw_break, }, /* set sw breakpoint */
         { "7", "T0*", skip_back_repeat_test }, /* Loop based on repeat_test */
-        { "D", "OK", 0, final_ack_set }, /* detach and unregister I/O */
+        { "D", "OK", NULL, final_ack_set }, /* detach and unregister I/O */
         { "", "" },
 };
 
@@ -556,11 +557,11 @@ static struct test_struct hw_breakpoint_test[] = {
         { "?", "S0*" }, /* Clear break points */
         { "kgdbts_break_test", "OK", hw_break, }, /* set hw breakpoint */
         { "c", "T0*", }, /* Continue */
-        { "g", "kgdbts_break_test", 0, check_and_rewind_pc },
+        { "g", "kgdbts_break_test", NULL, check_and_rewind_pc },
         { "write", "OK", write_regs },
         { "kgdbts_break_test", "OK", hw_rem_break }, /*remove breakpoint */
         { "D", "OK" }, /* Detach */
-        { "D", "OK", 0,  got_break }, /* If the test worked we made it here */
+        { "D", "OK", NULL,  got_break }, /* On success we made it here */
         { "", "" },
 };
 
@@ -570,12 +571,12 @@ static struct test_struct hw_breakpoint_test[] = {
 static struct test_struct hw_write_break_test[] = {
         { "?", "S0*" }, /* Clear break points */
         { "hw_break_val", "OK", hw_write_break, }, /* set hw breakpoint */
-        { "c", "T0*", 0, got_break }, /* Continue */
-        { "g", "silent", 0, check_and_rewind_pc },
+        { "c", "T0*", NULL, got_break }, /* Continue */
+        { "g", "silent", NULL, check_and_rewind_pc },
         { "write", "OK", write_regs },
         { "hw_break_val", "OK", hw_rem_write_break }, /*remove breakpoint */
         { "D", "OK" }, /* Detach */
-        { "D", "OK", 0,  got_break }, /* If the test worked we made it here */
+        { "D", "OK", NULL,  got_break }, /* On success we made it here */
         { "", "" },
 };
 
@@ -585,12 +586,12 @@ static struct test_struct hw_write_break_test[] = {
 static struct test_struct hw_access_break_test[] = {
         { "?", "S0*" }, /* Clear break points */
         { "hw_break_val", "OK", hw_access_break, }, /* set hw breakpoint */
-        { "c", "T0*", 0, got_break }, /* Continue */
-        { "g", "silent", 0, check_and_rewind_pc },
+        { "c", "T0*", NULL, got_break }, /* Continue */
+        { "g", "silent", NULL, check_and_rewind_pc },
         { "write", "OK", write_regs },
         { "hw_break_val", "OK", hw_rem_access_break }, /*remove breakpoint */
         { "D", "OK" }, /* Detach */
-        { "D", "OK", 0,  got_break }, /* If the test worked we made it here */
+        { "D", "OK", NULL,  got_break }, /* On success we made it here */
         { "", "" },
 };
 
@@ -599,9 +600,9 @@ static struct test_struct hw_access_break_test[] = {
  */
 static struct test_struct nmi_sleep_test[] = {
         { "?", "S0*" }, /* Clear break points */
-        { "c", "T0*", 0, got_break }, /* Continue */
+        { "c", "T0*", NULL, got_break }, /* Continue */
         { "D", "OK" }, /* Detach */
-        { "D", "OK", 0,  got_break }, /* If the test worked we made it here */
+        { "D", "OK", NULL,  got_break }, /* On success we made it here */
         { "", "" },
 };
 
@@ -874,18 +875,23 @@ static void kgdbts_run_tests(void)
 {
         char *ptr;
         int fork_test = 0;
-        int sys_open_test = 0;
+        int do_sys_open_test = 0;
+        int sstep_test = 1000;
         int nmi_sleep = 0;
+        int i;
 
         ptr = strstr(config, "F");
         if (ptr)
-                fork_test = simple_strtol(ptr+1, NULL, 10);
+                fork_test = simple_strtol(ptr + 1, NULL, 10);
         ptr = strstr(config, "S");
         if (ptr)
-                sys_open_test = simple_strtol(ptr+1, NULL, 10);
+                do_sys_open_test = simple_strtol(ptr + 1, NULL, 10);
         ptr = strstr(config, "N");
         if (ptr)
                 nmi_sleep = simple_strtol(ptr+1, NULL, 10);
+        ptr = strstr(config, "I");
+        if (ptr)
+                sstep_test = simple_strtol(ptr+1, NULL, 10);
 
         /* required internal KGDB tests */
         v1printk("kgdbts:RUN plant and detach test\n");
@@ -894,8 +900,13 @@ static void kgdbts_run_tests(void)
         run_breakpoint_test(0);
         v1printk("kgdbts:RUN bad memory access test\n");
         run_bad_read_test();
-        v1printk("kgdbts:RUN singlestep breakpoint test\n");
-        run_singlestep_break_test();
+        v1printk("kgdbts:RUN singlestep test %i iterations\n", sstep_test);
+        for (i = 0; i < sstep_test; i++) {
+                run_singlestep_break_test();
+                if (i % 100 == 0)
+                        v1printk("kgdbts:RUN singlestep [%i/%i]\n",
+                                 i, sstep_test);
+        }
 
         /* ===Optional tests=== */
 
@@ -922,7 +933,7 @@ static void kgdbts_run_tests(void)
                 repeat_test = fork_test;
                 printk(KERN_INFO "kgdbts:RUN do_fork for %i breakpoints\n",
                         repeat_test);
-                kthread_run(kgdbts_unreg_thread, 0, "kgdbts_unreg");
+                kthread_run(kgdbts_unreg_thread, NULL, "kgdbts_unreg");
                 run_do_fork_test();
                 return;
         }
@@ -931,11 +942,11 @@ static void kgdbts_run_tests(void)
          * executed because a kernel thread will be spawned at the very
          * end to unregister the debug hooks.
          */
-        if (sys_open_test) {
-                repeat_test = sys_open_test;
+        if (do_sys_open_test) {
+                repeat_test = do_sys_open_test;
                 printk(KERN_INFO "kgdbts:RUN sys_open for %i breakpoints\n",
                         repeat_test);
-                kthread_run(kgdbts_unreg_thread, 0, "kgdbts_unreg");
+                kthread_run(kgdbts_unreg_thread, NULL, "kgdbts_unreg");
                 run_sys_open_test();
                 return;
         }
diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c
index e812df607a5c..fcd1aeccdf93 100644
--- a/drivers/mtd/chips/cfi_cmdset_0001.c
+++ b/drivers/mtd/chips/cfi_cmdset_0001.c
@@ -82,9 +82,8 @@ static struct mtd_info *cfi_intelext_setup (struct mtd_info *);
 static int cfi_intelext_partition_fixup(struct mtd_info *, struct cfi_private **);
 
 static int cfi_intelext_point (struct mtd_info *mtd, loff_t from, size_t len,
-                     size_t *retlen, u_char **mtdbuf);
-static void cfi_intelext_unpoint (struct mtd_info *mtd, u_char *addr, loff_t from,
-                        size_t len);
+                     size_t *retlen, void **virt, resource_size_t *phys);
+static void cfi_intelext_unpoint(struct mtd_info *mtd, loff_t from, size_t len);
 
 static int chip_ready (struct map_info *map, struct flchip *chip, unsigned long adr, int mode);
 static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr, int mode);
@@ -1240,7 +1239,8 @@ static int do_point_onechip (struct map_info *map, struct flchip *chip, loff_t a
         return ret;
 }
 
-static int cfi_intelext_point (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char **mtdbuf)
+static int cfi_intelext_point(struct mtd_info *mtd, loff_t from, size_t len,
+                size_t *retlen, void **virt, resource_size_t *phys)
 {
         struct map_info *map = mtd->priv;
         struct cfi_private *cfi = map->fldrv_priv;
@@ -1257,8 +1257,10 @@ static int cfi_intelext_point (struct mtd_info *mtd, loff_t from, size_t len, si
         chipnum = (from >> cfi->chipshift);
         ofs = from - (chipnum << cfi->chipshift);
 
-        *mtdbuf = (void *)map->virt + cfi->chips[chipnum].start + ofs;
+        *virt = map->virt + cfi->chips[chipnum].start + ofs;
         *retlen = 0;
+        if (phys)
+                *phys = map->phys + cfi->chips[chipnum].start + ofs;
 
         while (len) {
                 unsigned long thislen;
@@ -1291,7 +1293,7 @@ static int cfi_intelext_point (struct mtd_info *mtd, loff_t from, size_t len, si
         return 0;
 }
 
-static void cfi_intelext_unpoint (struct mtd_info *mtd, u_char *addr, loff_t from, size_t len)
+static void cfi_intelext_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
 {
         struct map_info *map = mtd->priv;
         struct cfi_private *cfi = map->fldrv_priv;
diff --git a/drivers/mtd/devices/mtdram.c b/drivers/mtd/devices/mtdram.c
index bf485ff49457..0399be178620 100644
--- a/drivers/mtd/devices/mtdram.c
+++ b/drivers/mtd/devices/mtdram.c
@@ -48,18 +48,21 @@ static int ram_erase(struct mtd_info *mtd, struct erase_info *instr)
 }
 
 static int ram_point(struct mtd_info *mtd, loff_t from, size_t len,
-                size_t *retlen, u_char **mtdbuf)
+                size_t *retlen, void **virt, resource_size_t *phys)
 {
         if (from + len > mtd->size)
                 return -EINVAL;
 
-        *mtdbuf = mtd->priv + from;
+        /* can we return a physical address with this driver? */
+        if (phys)
+                return -EINVAL;
+
+        *virt = mtd->priv + from;
         *retlen = len;
         return 0;
 }
 
-static void ram_unpoint(struct mtd_info *mtd, u_char * addr, loff_t from,
-                size_t len)
+static void ram_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
 {
 }
 
diff --git a/drivers/mtd/devices/phram.c b/drivers/mtd/devices/phram.c
index 5f960182da95..c7987b1c5e01 100644
--- a/drivers/mtd/devices/phram.c
+++ b/drivers/mtd/devices/phram.c
@@ -57,20 +57,21 @@ static int phram_erase(struct mtd_info *mtd, struct erase_info *instr)
 }
 
 static int phram_point(struct mtd_info *mtd, loff_t from, size_t len,
-                size_t *retlen, u_char **mtdbuf)
+                size_t *retlen, void **virt, resource_size_t *phys)
 {
-        u_char *start = mtd->priv;
-
         if (from + len > mtd->size)
                 return -EINVAL;
 
-        *mtdbuf = start + from;
+        /* can we return a physical address with this driver? */
+        if (phys)
+                return -EINVAL;
+
+        *virt = mtd->priv + from;
         *retlen = len;
         return 0;
 }
 
-static void phram_unpoint(struct mtd_info *mtd, u_char *addr, loff_t from,
-                size_t len)
+static void phram_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
 {
 }
 
diff --git a/drivers/mtd/devices/pmc551.c b/drivers/mtd/devices/pmc551.c
index 7060a0895ce2..bc9981749064 100644
--- a/drivers/mtd/devices/pmc551.c
+++ b/drivers/mtd/devices/pmc551.c
@@ -134,7 +134,8 @@ static int pmc551_erase(struct mtd_info *mtd, struct erase_info *instr)
         eoff_lo = end & (priv->asize - 1);
         soff_lo = instr->addr & (priv->asize - 1);
 
-        pmc551_point(mtd, instr->addr, instr->len, &retlen, &ptr);
+        pmc551_point(mtd, instr->addr, instr->len, &retlen,
+                     (void **)&ptr, NULL);
 
         if (soff_hi == eoff_hi || mtd->size == priv->asize) {
                 /* The whole thing fits within one access, so just one shot
@@ -154,7 +155,8 @@ static int pmc551_erase(struct mtd_info *mtd, struct erase_info *instr)
                         }
                         soff_hi += priv->asize;
                         pmc551_point(mtd, (priv->base_map0 | soff_hi),
-                                     priv->asize, &retlen, &ptr);
+                                     priv->asize, &retlen,
+                                     (void **)&ptr, NULL);
                 }
                 memset(ptr, 0xff, eoff_lo);
         }
@@ -170,7 +172,7 @@ static int pmc551_erase(struct mtd_info *mtd, struct erase_info *instr)
 }
 
 static int pmc551_point(struct mtd_info *mtd, loff_t from, size_t len,
-                        size_t * retlen, u_char ** mtdbuf)
+                        size_t *retlen, void **virt, resource_size_t *phys)
 {
         struct mypriv *priv = mtd->priv;
         u32 soff_hi;
@@ -188,6 +190,10 @@ static int pmc551_point(struct mtd_info *mtd, loff_t from, size_t len,
                 return -EINVAL;
         }
 
+        /* can we return a physical address with this driver? */
+        if (phys)
+                return -EINVAL;
+
         soff_hi = from & ~(priv->asize - 1);
         soff_lo = from & (priv->asize - 1);
 
@@ -198,13 +204,12 @@ static int pmc551_point(struct mtd_info *mtd, loff_t from, size_t len,
                 priv->curr_map0 = soff_hi;
         }
 
-        *mtdbuf = priv->start + soff_lo;
+        *virt = priv->start + soff_lo;
         *retlen = len;
         return 0;
 }
 
-static void pmc551_unpoint(struct mtd_info *mtd, u_char * addr, loff_t from,
-                           size_t len)
+static void pmc551_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
 {
 #ifdef CONFIG_MTD_PMC551_DEBUG
         printk(KERN_DEBUG "pmc551_unpoint()\n");
@@ -242,7 +247,7 @@ static int pmc551_read(struct mtd_info *mtd, loff_t from, size_t len,
         soff_lo = from & (priv->asize - 1);
         eoff_lo = end & (priv->asize - 1);
 
-        pmc551_point(mtd, from, len, retlen, &ptr);
+        pmc551_point(mtd, from, len, retlen, (void **)&ptr, NULL);
 
         if (soff_hi == eoff_hi) {
                 /* The whole thing fits within one access, so just one shot
@@ -263,7 +268,8 @@ static int pmc551_read(struct mtd_info *mtd, loff_t from, size_t len,
                                 goto out;
                         }
                         soff_hi += priv->asize;
-                        pmc551_point(mtd, soff_hi, priv->asize, retlen, &ptr);
+                        pmc551_point(mtd, soff_hi, priv->asize, retlen,
+                                     (void **)&ptr, NULL);
                 }
                 memcpy(copyto, ptr, eoff_lo);
                 copyto += eoff_lo;
@@ -308,7 +314,7 @@ static int pmc551_write(struct mtd_info *mtd, loff_t to, size_t len,
         soff_lo = to & (priv->asize - 1);
         eoff_lo = end & (priv->asize - 1);
 
-        pmc551_point(mtd, to, len, retlen, &ptr);
+        pmc551_point(mtd, to, len, retlen, (void **)&ptr, NULL);
 
         if (soff_hi == eoff_hi) {
                 /* The whole thing fits within one access, so just one shot
@@ -329,7 +335,8 @@ static int pmc551_write(struct mtd_info *mtd, loff_t to, size_t len,
                                 goto out;
                         }
                         soff_hi += priv->asize;
-                        pmc551_point(mtd, soff_hi, priv->asize, retlen, &ptr);
+                        pmc551_point(mtd, soff_hi, priv->asize, retlen,
+                                     (void **)&ptr, NULL);
                 }
                 memcpy(ptr, copyfrom, eoff_lo);
                 copyfrom += eoff_lo;
diff --git a/drivers/mtd/devices/slram.c b/drivers/mtd/devices/slram.c
index d293add1857c..cb86db746f28 100644
--- a/drivers/mtd/devices/slram.c
+++ b/drivers/mtd/devices/slram.c
@@ -76,8 +76,9 @@ static char *map;
 static slram_mtd_list_t *slram_mtdlist = NULL;
 
 static int slram_erase(struct mtd_info *, struct erase_info *);
-static int slram_point(struct mtd_info *, loff_t, size_t, size_t *, u_char **);
-static void slram_unpoint(struct mtd_info *, u_char *, loff_t,  size_t);
+static int slram_point(struct mtd_info *, loff_t, size_t, size_t *, void **,
+                resource_size_t *);
+static void slram_unpoint(struct mtd_info *, loff_t, size_t);
 static int slram_read(struct mtd_info *, loff_t, size_t, size_t *, u_char *);
 static int slram_write(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
 
@@ -104,19 +105,23 @@ static int slram_erase(struct mtd_info *mtd, struct erase_info *instr)
 }
 
 static int slram_point(struct mtd_info *mtd, loff_t from, size_t len,
-                size_t *retlen, u_char **mtdbuf)
+                size_t *retlen, void **virt, resource_size_t *phys)
 {
         slram_priv_t *priv = mtd->priv;
 
+        /* can we return a physical address with this driver? */
+        if (phys)
+                return -EINVAL;
+
         if (from + len > mtd->size)
                 return -EINVAL;
 
-        *mtdbuf = priv->start + from;
+        *virt = priv->start + from;
         *retlen = len;
         return(0);
 }
 
-static void slram_unpoint(struct mtd_info *mtd, u_char *addr, loff_t from, size_t len)
+static void slram_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
 {
 }
 
diff --git a/drivers/mtd/maps/uclinux.c b/drivers/mtd/maps/uclinux.c
index 14ffb1a9302a..c42f4b83f686 100644
--- a/drivers/mtd/maps/uclinux.c
+++ b/drivers/mtd/maps/uclinux.c
@@ -40,10 +40,12 @@ struct mtd_partition uclinux_romfs[] = {
 /****************************************************************************/
 
 int uclinux_point(struct mtd_info *mtd, loff_t from, size_t len,
-        size_t *retlen, u_char **mtdbuf)
+        size_t *retlen, void **virt, resource_size_t *phys)
 {
         struct map_info *map = mtd->priv;
-        *mtdbuf = (u_char *) (map->virt + ((int) from));
+        *virt = map->virt + from;
+        if (phys)
+                *phys = map->phys + from;
         *retlen = len;
         return(0);
 }
diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
index c66902df3171..07c701169344 100644
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -68,7 +68,7 @@ static int part_read (struct mtd_info *mtd, loff_t from, size_t len,
 }
 
 static int part_point (struct mtd_info *mtd, loff_t from, size_t len,
-                        size_t *retlen, u_char **buf)
+                        size_t *retlen, void **virt, resource_size_t *phys)
 {
         struct mtd_part *part = PART(mtd);
         if (from >= mtd->size)
@@ -76,14 +76,14 @@ static int part_point (struct mtd_info *mtd, loff_t from, size_t len,
         else if (from + len > mtd->size)
                 len = mtd->size - from;
         return part->master->point (part->master, from + part->offset,
-                                    len, retlen, buf);
+                                    len, retlen, virt, phys);
 }
 
-static void part_unpoint (struct mtd_info *mtd, u_char *addr, loff_t from, size_t len)
+static void part_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
 {
         struct mtd_part *part = PART(mtd);
 
-        part->master->unpoint (part->master, addr, from + part->offset, len);
+        part->master->unpoint(part->master, from + part->offset, len);
 }
 
 static int part_read_oob(struct mtd_info *mtd, loff_t from,
diff --git a/drivers/mtd/nand/at91_nand.c b/drivers/mtd/nand/at91_nand.c
index 414ceaecdb3a..0adb287027a2 100644
--- a/drivers/mtd/nand/at91_nand.c
+++ b/drivers/mtd/nand/at91_nand.c
@@ -94,6 +94,24 @@ struct at91_nand_host {
 };
 
 /*
+ * Enable NAND.
+ */
+static void at91_nand_enable(struct at91_nand_host *host)
+{
+        if (host->board->enable_pin)
+                at91_set_gpio_value(host->board->enable_pin, 0);
+}
+
+/*
+ * Disable NAND.
+ */
+static void at91_nand_disable(struct at91_nand_host *host)
+{
+        if (host->board->enable_pin)
+                at91_set_gpio_value(host->board->enable_pin, 1);
+}
+
+/*
  * Hardware specific access to control-lines
  */
 static void at91_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
@@ -101,11 +119,11 @@ static void at91_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
         struct nand_chip *nand_chip = mtd->priv;
         struct at91_nand_host *host = nand_chip->priv;
 
-        if (host->board->enable_pin && (ctrl & NAND_CTRL_CHANGE)) {
+        if (ctrl & NAND_CTRL_CHANGE) {
                 if (ctrl & NAND_NCE)
-                        at91_set_gpio_value(host->board->enable_pin, 0);
+                        at91_nand_enable(host);
                 else
-                        at91_set_gpio_value(host->board->enable_pin, 1);
+                        at91_nand_disable(host);
         }
         if (cmd == NAND_CMD_NONE)
                 return;
@@ -128,24 +146,6 @@ static int at91_nand_device_ready(struct mtd_info *mtd)
 }
 
 /*
- * Enable NAND.
- */
-static void at91_nand_enable(struct at91_nand_host *host)
-{
-        if (host->board->enable_pin)
-                at91_set_gpio_value(host->board->enable_pin, 0);
-}
-
-/*
- * Disable NAND.
- */
-static void at91_nand_disable(struct at91_nand_host *host)
-{
-        if (host->board->enable_pin)
-                at91_set_gpio_value(host->board->enable_pin, 1);
-}
-
-/*
  * write oob for small pages
  */
 static int at91_nand_write_oob_512(struct mtd_info *mtd,
diff --git a/drivers/net/fec.c b/drivers/net/fec.c
index d7a3ea88eddb..32a4f17d35fc 100644
--- a/drivers/net/fec.c
+++ b/drivers/net/fec.c
@@ -67,6 +67,10 @@
 #define FEC_MAX_PORTS   1
 #endif
 
+#if defined(CONFIG_FADS) || defined(CONFIG_RPXCLASSIC) || defined(CONFIG_M5272)
+#define HAVE_mii_link_interrupt
+#endif
+
 /*
  * Define the fixed address of the FEC hardware.
  */
@@ -205,7 +209,10 @@ struct fec_enet_private {
         cbd_t   *cur_rx, *cur_tx;               /* The next free ring entry */
         cbd_t   *dirty_tx;      /* The ring entries to be free()ed. */
         uint    tx_full;
-        spinlock_t lock;
+        /* hold while accessing the HW like ringbuffer for tx/rx but not MAC */
+        spinlock_t hw_lock;
+        /* hold while accessing the mii_list_t() elements */
+        spinlock_t mii_lock;
 
         uint    phy_id;
         uint    phy_id_done;
@@ -309,6 +316,7 @@ fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
         volatile fec_t  *fecp;
         volatile cbd_t  *bdp;
         unsigned short  status;
+        unsigned long flags;
 
         fep = netdev_priv(dev);
         fecp = (volatile fec_t*)dev->base_addr;
@@ -318,6 +326,7 @@ fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
                 return 1;
         }
 
+        spin_lock_irqsave(&fep->hw_lock, flags);
         /* Fill in a Tx ring entry */
         bdp = fep->cur_tx;
 
@@ -328,6 +337,7 @@ fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
                  * This should not happen, since dev->tbusy should be set.
                  */
                 printk("%s: tx queue full!.\n", dev->name);
+                spin_unlock_irqrestore(&fep->hw_lock, flags);
                 return 1;
         }
 #endif
@@ -366,8 +376,6 @@ fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
         flush_dcache_range((unsigned long)skb->data,
                            (unsigned long)skb->data + skb->len);
 
-        spin_lock_irq(&fep->lock);
-
         /* Send it on its way.  Tell FEC it's ready, interrupt when done,
          * it's the last BD of the frame, and to put the CRC on the end.
          */
@@ -396,7 +404,7 @@ fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
         fep->cur_tx = (cbd_t *)bdp;
 
-        spin_unlock_irq(&fep->lock);
+        spin_unlock_irqrestore(&fep->hw_lock, flags);
 
         return 0;
 }
@@ -454,19 +462,20 @@ fec_enet_interrupt(int irq, void * dev_id)
         struct  net_device *dev = dev_id;
         volatile fec_t  *fecp;
         uint    int_events;
-        int handled = 0;
+        irqreturn_t ret = IRQ_NONE;
 
         fecp = (volatile fec_t*)dev->base_addr;
 
         /* Get the interrupt events that caused us to be here.
         */
-        while ((int_events = fecp->fec_ievent) != 0) {
+        do {
+                int_events = fecp->fec_ievent;
                 fecp->fec_ievent = int_events;
 
                 /* Handle receive event in its own function.
                  */
                 if (int_events & FEC_ENET_RXF) {
-                        handled = 1;
+                        ret = IRQ_HANDLED;
                         fec_enet_rx(dev);
                 }
 
@@ -475,17 +484,18 @@ fec_enet_interrupt(int irq, void * dev_id)
                    them as part of the transmit process.
                 */
                 if (int_events & FEC_ENET_TXF) {
-                        handled = 1;
+                        ret = IRQ_HANDLED;
                         fec_enet_tx(dev);
                 }
 
                 if (int_events & FEC_ENET_MII) {
-                        handled = 1;
+                        ret = IRQ_HANDLED;
                         fec_enet_mii(dev);
                 }
 
-        }
-        return IRQ_RETVAL(handled);
+        } while (int_events);
+
+        return ret;
 }
 
 
@@ -498,7 +508,7 @@ fec_enet_tx(struct net_device *dev)
         struct  sk_buff *skb;
 
         fep = netdev_priv(dev);
-        spin_lock(&fep->lock);
+        spin_lock_irq(&fep->hw_lock);
         bdp = fep->dirty_tx;
 
         while (((status = bdp->cbd_sc) & BD_ENET_TX_READY) == 0) {
@@ -557,7 +567,7 @@ fec_enet_tx(struct net_device *dev)
                 }
         }
         fep->dirty_tx = (cbd_t *)bdp;
-        spin_unlock(&fep->lock);
+        spin_unlock_irq(&fep->hw_lock);
 }
 
 
@@ -584,6 +594,8 @@ fec_enet_rx(struct net_device *dev)
         fep = netdev_priv(dev);
         fecp = (volatile fec_t*)dev->base_addr;
 
+        spin_lock_irq(&fep->hw_lock);
+
         /* First, grab all of the stats for the incoming packet.
          * These get messed up if we get called due to a busy condition.
          */
@@ -689,6 +701,8 @@ while (!((status = bdp->cbd_sc) & BD_ENET_RX_EMPTY)) {
          */
         fecp->fec_r_des_active = 0;
 #endif
+
+        spin_unlock_irq(&fep->hw_lock);
 }
 
 
@@ -702,11 +716,11 @@ fec_enet_mii(struct net_device *dev)
         uint            mii_reg;
 
         fep = netdev_priv(dev);
+        spin_lock_irq(&fep->mii_lock);
+
         ep = fep->hwp;
         mii_reg = ep->fec_mii_data;
 
-        spin_lock(&fep->lock);
-
         if ((mip = mii_head) == NULL) {
                 printk("MII and no head!\n");
                 goto unlock;
@@ -723,7 +737,7 @@ fec_enet_mii(struct net_device *dev)
                 ep->fec_mii_data = mip->mii_regval;
 
 unlock:
-        spin_unlock(&fep->lock);
+        spin_unlock_irq(&fep->mii_lock);
 }
 
 static int
@@ -737,12 +751,11 @@ mii_queue(struct net_device *dev, int regval, void (*func)(uint, struct net_devi
         /* Add PHY address to register command.
         */
         fep = netdev_priv(dev);
-        regval |= fep->phy_addr << 23;
+        spin_lock_irqsave(&fep->mii_lock, flags);
 
+        regval |= fep->phy_addr << 23;
         retval = 0;
 
-        spin_lock_irqsave(&fep->lock,flags);
-
         if ((mip = mii_free) != NULL) {
                 mii_free = mip->mii_next;
                 mip->mii_regval = regval;
@@ -759,9 +772,8 @@ mii_queue(struct net_device *dev, int regval, void (*func)(uint, struct net_devi
                 retval = 1;
         }
 
-        spin_unlock_irqrestore(&fep->lock,flags);
-
-        return(retval);
+        spin_unlock_irqrestore(&fep->mii_lock, flags);
+        return retval;
 }
 
 static void mii_do_cmd(struct net_device *dev, const phy_cmd_t *c)
@@ -1222,7 +1234,7 @@ static phy_info_t const * const phy_info[] = {
 };
 
 /* ------------------------------------------------------------------------- */
-#if !defined(CONFIG_M532x)
+#ifdef HAVE_mii_link_interrupt
 #ifdef CONFIG_RPXCLASSIC
 static void
 mii_link_interrupt(void *dev_id);
@@ -1362,18 +1374,8 @@ static void __inline__ fec_request_intrs(struct net_device *dev)
                 unsigned short irq;
         } *idp, id[] = {
                 { "fec(TXF)", 23 },
-                { "fec(TXB)", 24 },
-                { "fec(TXFIFO)", 25 },
-                { "fec(TXCR)", 26 },
                 { "fec(RXF)", 27 },
-                { "fec(RXB)", 28 },
                 { "fec(MII)", 29 },
-                { "fec(LC)", 30 },
-                { "fec(HBERR)", 31 },
-                { "fec(GRA)", 32 },
-                { "fec(EBERR)", 33 },
-                { "fec(BABT)", 34 },
-                { "fec(BABR)", 35 },
                 { NULL },
         };
 
@@ -1533,18 +1535,8 @@ static void __inline__ fec_request_intrs(struct net_device *dev)
                 unsigned short irq;
         } *idp, id[] = {
                 { "fec(TXF)", 23 },
-                { "fec(TXB)", 24 },
-                { "fec(TXFIFO)", 25 },
-                { "fec(TXCR)", 26 },
                 { "fec(RXF)", 27 },
-                { "fec(RXB)", 28 },
                 { "fec(MII)", 29 },
-                { "fec(LC)", 30 },
-                { "fec(HBERR)", 31 },
-                { "fec(GRA)", 32 },
-                { "fec(EBERR)", 33 },
-                { "fec(BABT)", 34 },
-                { "fec(BABR)", 35 },
                 { NULL },
         };
 
@@ -1660,18 +1652,8 @@ static void __inline__ fec_request_intrs(struct net_device *dev)
                 unsigned short irq;
         } *idp, id[] = {
             { "fec(TXF)", 36 },
-            { "fec(TXB)", 37 },
-            { "fec(TXFIFO)", 38 },
-            { "fec(TXCR)", 39 },
             { "fec(RXF)", 40 },
-            { "fec(RXB)", 41 },
             { "fec(MII)", 42 },
-            { "fec(LC)", 43 },
-            { "fec(HBERR)", 44 },
-            { "fec(GRA)", 45 },
-            { "fec(EBERR)", 46 },
-            { "fec(BABT)", 47 },
-            { "fec(BABR)", 48 },
             { NULL },
         };
 
@@ -2126,6 +2108,7 @@ mii_discover_phy(uint mii_reg, struct net_device *dev)
 
 /* This interrupt occurs when the PHY detects a link change.
 */
+#ifdef HAVE_mii_link_interrupt
 #ifdef CONFIG_RPXCLASSIC
 static void
 mii_link_interrupt(void *dev_id)
@@ -2148,6 +2131,7 @@ mii_link_interrupt(int irq, void * dev_id)
 
         return IRQ_HANDLED;
 }
+#endif
 
 static int
 fec_enet_open(struct net_device *dev)
@@ -2243,13 +2227,13 @@ static void set_multicast_list(struct net_device *dev)
                         /* Catch all multicast addresses, so set the
                          * filter to all 1's.
                          */
-                        ep->fec_hash_table_high = 0xffffffff;
-                        ep->fec_hash_table_low = 0xffffffff;
+                        ep->fec_grp_hash_table_high = 0xffffffff;
+                        ep->fec_grp_hash_table_low = 0xffffffff;
                 } else {
                         /* Clear filter and add the addresses in hash register.
                         */
-                        ep->fec_hash_table_high = 0;
-                        ep->fec_hash_table_low = 0;
+                        ep->fec_grp_hash_table_high = 0;
+                        ep->fec_grp_hash_table_low = 0;
 
                         dmi = dev->mc_list;
 
@@ -2280,9 +2264,9 @@ static void set_multicast_list(struct net_device *dev)
                                 hash = (crc >> (32 - HASH_BITS)) & 0x3f;
 
                                 if (hash > 31)
-                                        ep->fec_hash_table_high |= 1 << (hash - 32);
+                                        ep->fec_grp_hash_table_high |= 1 << (hash - 32);
                                 else
-                                        ep->fec_hash_table_low |= 1 << hash;
+                                        ep->fec_grp_hash_table_low |= 1 << hash;
                         }
                 }
         }
@@ -2332,6 +2316,9 @@ int __init fec_enet_init(struct net_device *dev)
                 return -ENOMEM;
         }
 
+        spin_lock_init(&fep->hw_lock);
+        spin_lock_init(&fep->mii_lock);
+
         /* Create an Ethernet device instance.
         */
         fecp = (volatile fec_t *) fec_hw[index];
@@ -2430,11 +2417,15 @@ int __init fec_enet_init(struct net_device *dev)
         */
         fec_request_intrs(dev);
 
-        fecp->fec_hash_table_high = 0;
-        fecp->fec_hash_table_low = 0;
+        fecp->fec_grp_hash_table_high = 0;
+        fecp->fec_grp_hash_table_low = 0;
         fecp->fec_r_buff_size = PKT_MAXBLR_SIZE;
         fecp->fec_ecntrl = 2;
         fecp->fec_r_des_active = 0;
+#ifndef CONFIG_M5272
+        fecp->fec_hash_table_high = 0;
+        fecp->fec_hash_table_low = 0;
+#endif
 
         dev->base_addr = (unsigned long)fecp;
 
@@ -2455,8 +2446,7 @@ int __init fec_enet_init(struct net_device *dev)
 
         /* Clear and enable interrupts */
         fecp->fec_ievent = 0xffc00000;
-        fecp->fec_imask = (FEC_ENET_TXF | FEC_ENET_TXB |
-                FEC_ENET_RXF | FEC_ENET_RXB | FEC_ENET_MII);
+        fecp->fec_imask = (FEC_ENET_TXF | FEC_ENET_RXF | FEC_ENET_MII);
 
         /* Queue up command to detect the PHY and initialize the
          * remainder of the interface.
@@ -2500,8 +2490,8 @@ fec_restart(struct net_device *dev, int duplex)
 
         /* Reset all multicast.
         */
-        fecp->fec_hash_table_high = 0;
-        fecp->fec_hash_table_low = 0;
+        fecp->fec_grp_hash_table_high = 0;
+        fecp->fec_grp_hash_table_low = 0;
 
         /* Set maximum receive buffer size.
         */
@@ -2583,8 +2573,7 @@ fec_restart(struct net_device *dev, int duplex)
 
         /* Enable interrupts we wish to service.
         */
-        fecp->fec_imask = (FEC_ENET_TXF | FEC_ENET_TXB |
-                FEC_ENET_RXF | FEC_ENET_RXB | FEC_ENET_MII);
+        fecp->fec_imask = (FEC_ENET_TXF | FEC_ENET_RXF | FEC_ENET_MII);
 }
 
 static void
@@ -2624,7 +2613,7 @@ fec_stop(struct net_device *dev)
 static int __init fec_enet_module_init(void)
 {
         struct net_device *dev;
-        int i, j, err;
+        int i, err;
         DECLARE_MAC_BUF(mac);
 
         printk("FEC ENET Version 0.2\n");
diff --git a/drivers/net/fec.h b/drivers/net/fec.h
index 1d421606984f..292719daceff 100644
--- a/drivers/net/fec.h
+++ b/drivers/net/fec.h
@@ -88,8 +88,8 @@ typedef struct fec {
         unsigned long   fec_reserved7[158];
         unsigned long   fec_addr_low;           /* Low 32bits MAC address */
         unsigned long   fec_addr_high;          /* High 16bits MAC address */
-        unsigned long   fec_hash_table_high;    /* High 32bits hash table */
-        unsigned long   fec_hash_table_low;     /* Low 32bits hash table */
+        unsigned long   fec_grp_hash_table_high;/* High 32bits hash table */
+        unsigned long   fec_grp_hash_table_low; /* Low 32bits hash table */
         unsigned long   fec_r_des_start;        /* Receive descriptor ring */
         unsigned long   fec_x_des_start;        /* Transmit descriptor ring */
         unsigned long   fec_r_buff_size;        /* Maximum receive buff size */
diff --git a/drivers/net/fec_mpc52xx.c b/drivers/net/fec_mpc52xx.c
index d21b7ab64bd1..5f9c42e7a7f1 100644
--- a/drivers/net/fec_mpc52xx.c
+++ b/drivers/net/fec_mpc52xx.c
@@ -43,6 +43,29 @@
 
 #define DRIVER_NAME "mpc52xx-fec"
 
+#define FEC5200_PHYADDR_NONE    (-1)
+#define FEC5200_PHYADDR_7WIRE   (-2)
+
+/* Private driver data structure */
+struct mpc52xx_fec_priv {
+        int duplex;
+        int speed;
+        int r_irq;
+        int t_irq;
+        struct mpc52xx_fec __iomem *fec;
+        struct bcom_task *rx_dmatsk;
+        struct bcom_task *tx_dmatsk;
+        spinlock_t lock;
+        int msg_enable;
+
+        /* MDIO link details */
+        int phy_addr;
+        unsigned int phy_speed;
+        struct phy_device *phydev;
+        enum phy_state link;
+};
+
+
 static irqreturn_t mpc52xx_fec_interrupt(int, void *);
 static irqreturn_t mpc52xx_fec_rx_interrupt(int, void *);
 static irqreturn_t mpc52xx_fec_tx_interrupt(int, void *);
@@ -223,7 +246,7 @@ static int mpc52xx_fec_phy_start(struct net_device *dev)
         struct mpc52xx_fec_priv *priv = netdev_priv(dev);
         int err;
 
-        if (!priv->has_phy)
+        if (priv->phy_addr < 0)
                 return 0;
 
         err = mpc52xx_fec_init_phy(dev);
@@ -243,7 +266,7 @@ static void mpc52xx_fec_phy_stop(struct net_device *dev)
 {
         struct mpc52xx_fec_priv *priv = netdev_priv(dev);
 
-        if (!priv->has_phy)
+        if (!priv->phydev)
                 return;
 
         phy_disconnect(priv->phydev);
@@ -255,7 +278,7 @@ static void mpc52xx_fec_phy_stop(struct net_device *dev)
 static int mpc52xx_fec_phy_mii_ioctl(struct mpc52xx_fec_priv *priv,
                 struct mii_ioctl_data *mii_data, int cmd)
 {
-        if (!priv->has_phy)
+        if (!priv->phydev)
                 return -ENOTSUPP;
 
         return phy_mii_ioctl(priv->phydev, mii_data, cmd);
@@ -265,7 +288,7 @@ static void mpc52xx_fec_phy_hw_init(struct mpc52xx_fec_priv *priv)
 {
         struct mpc52xx_fec __iomem *fec = priv->fec;
 
-        if (!priv->has_phy)
+        if (priv->phydev)
                 return;
 
         out_be32(&fec->mii_speed, priv->phy_speed);
@@ -704,7 +727,7 @@ static void mpc52xx_fec_start(struct net_device *dev)
         rcntrl = FEC_RX_BUFFER_SIZE << 16;      /* max frame length */
         rcntrl |= FEC_RCNTRL_FCE;
 
-        if (priv->has_phy)
+        if (priv->phy_addr != FEC5200_PHYADDR_7WIRE)
                 rcntrl |= FEC_RCNTRL_MII_MODE;
 
         if (priv->duplex == DUPLEX_FULL)
@@ -864,7 +887,10 @@ mpc52xx_fec_probe(struct of_device *op, const struct of_device_id *match)
         struct net_device *ndev;
         struct mpc52xx_fec_priv *priv = NULL;
         struct resource mem;
-        const phandle *ph;
+        struct device_node *phy_node;
+        const phandle *phy_handle;
+        const u32 *prop;
+        int prop_size;
 
         phys_addr_t rx_fifo;
         phys_addr_t tx_fifo;
@@ -948,26 +974,37 @@ mpc52xx_fec_probe(struct of_device *op, const struct of_device_id *match)
                 mpc52xx_fec_get_paddr(ndev, ndev->dev_addr);
 
         priv->msg_enable = netif_msg_init(debug, MPC52xx_MESSAGES_DEFAULT);
-        priv->duplex = DUPLEX_FULL;
-
-        /* is the phy present in device tree? */
-        ph = of_get_property(op->node, "phy-handle", NULL);
-        if (ph) {
-                const unsigned int *prop;
-                struct device_node *phy_dn;
-                priv->has_phy = 1;
 
-                phy_dn = of_find_node_by_phandle(*ph);
-                prop = of_get_property(phy_dn, "reg", NULL);
-                priv->phy_addr = *prop;
+        /*
+         * Link mode configuration
+         */
 
-                of_node_put(phy_dn);
+        /* Start with safe defaults for link connection */
+        priv->phy_addr = FEC5200_PHYADDR_NONE;
+        priv->speed = 100;
+        priv->duplex = DUPLEX_HALF;
+        priv->phy_speed = ((mpc52xx_find_ipb_freq(op->node) >> 20) / 5) << 1;
+
+        /* the 7-wire property means don't use MII mode */
+        if (of_find_property(op->node, "fsl,7-wire-mode", NULL))
+                priv->phy_addr = FEC5200_PHYADDR_7WIRE;
+
+        /* The current speed preconfigures the speed of the MII link */
+        prop = of_get_property(op->node, "current-speed", &prop_size);
+        if (prop && (prop_size >= sizeof(u32) * 2)) {
+                priv->speed = prop[0];
+                priv->duplex = prop[1] ? DUPLEX_FULL : DUPLEX_HALF;
+        }
 
-                /* Phy speed */
-                priv->phy_speed = ((mpc52xx_find_ipb_freq(op->node) >> 20) / 5) << 1;
-        } else {
-                dev_info(&ndev->dev, "can't find \"phy-handle\" in device"
-                                " tree, using 7-wire mode\n");
+        /* If there is a phy handle, setup link to that phy */
+        phy_handle = of_get_property(op->node, "phy-handle", &prop_size);
+        if (phy_handle && (prop_size >= sizeof(phandle))) {
+                phy_node = of_find_node_by_phandle(*phy_handle);
+                prop = of_get_property(phy_node, "reg", &prop_size);
+                if (prop && (prop_size >= sizeof(u32)))
+                        if ((*prop >= 0) && (*prop < PHY_MAX_ADDR))
+                                priv->phy_addr = *prop;
+                of_node_put(phy_node);
         }
 
         /* Hardware init */
@@ -982,6 +1019,20 @@ mpc52xx_fec_probe(struct of_device *op, const struct of_device_id *match)
         if (rv < 0)
                 goto probe_error;
 
+        /* Now report the link setup */
+        switch (priv->phy_addr) {
+         case FEC5200_PHYADDR_NONE:
+                dev_info(&ndev->dev, "Fixed speed MII link: %i%cD\n",
+                         priv->speed, priv->duplex ? 'F' : 'H');
+                break;
+         case FEC5200_PHYADDR_7WIRE:
+                dev_info(&ndev->dev, "using 7-wire PHY mode\n");
+                break;
+         default:
+                dev_info(&ndev->dev, "Using PHY at MDIO address %i\n",
+                         priv->phy_addr);
+        }
+
         /* We're done ! */
         dev_set_drvdata(&op->dev, ndev);
 
diff --git a/drivers/net/fec_mpc52xx.h b/drivers/net/fec_mpc52xx.h
index 8b1f75397b9a..a227a525bdbb 100644
--- a/drivers/net/fec_mpc52xx.h
+++ b/drivers/net/fec_mpc52xx.h
@@ -26,25 +26,6 @@
 
 #define FEC_WATCHDOG_TIMEOUT    ((400*HZ)/1000)
 
-struct mpc52xx_fec_priv {
-        int duplex;
-        int r_irq;
-        int t_irq;
-        struct mpc52xx_fec __iomem *fec;
-        struct bcom_task *rx_dmatsk;
-        struct bcom_task *tx_dmatsk;
-        spinlock_t lock;
-        int msg_enable;
-
-        int has_phy;
-        unsigned int phy_speed;
-        unsigned int phy_addr;
-        struct phy_device *phydev;
-        enum phy_state link;
-        int speed;
-};
-
-
 /* ======================================================================== */
 /* Hardware register sets & bits                                            */
 /* ======================================================================== */
diff --git a/drivers/net/mlx4/mr.c b/drivers/net/mlx4/mr.c
index cb46446b2691..03a9abcce524 100644
--- a/drivers/net/mlx4/mr.c
+++ b/drivers/net/mlx4/mr.c
@@ -551,7 +551,7 @@ int mlx4_fmr_alloc(struct mlx4_dev *dev, u32 pd, u32 access, int max_pages,
         u64 mtt_seg;
         int err = -ENOMEM;
 
-        if (page_shift < 12 || page_shift >= 32)
+        if (page_shift < (ffs(dev->caps.page_size_cap) - 1) || page_shift >= 32)
                 return -EINVAL;
 
         /* All MTTs must fit in the same page */
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index 555b70c8b863..f926b5ab3d09 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -41,6 +41,9 @@ struct virtnet_info
         struct net_device *dev;
         struct napi_struct napi;
 
+        /* The skb we couldn't send because buffers were full. */
+        struct sk_buff *last_xmit_skb;
+
         /* Number of input buffers, and max we've ever had. */
         unsigned int num, max;
 
@@ -142,10 +145,10 @@ drop:
 static void try_fill_recv(struct virtnet_info *vi)
 {
         struct sk_buff *skb;
-        struct scatterlist sg[1+MAX_SKB_FRAGS];
+        struct scatterlist sg[2+MAX_SKB_FRAGS];
         int num, err;
 
-        sg_init_table(sg, 1+MAX_SKB_FRAGS);
+        sg_init_table(sg, 2+MAX_SKB_FRAGS);
         for (;;) {
                 skb = netdev_alloc_skb(vi->dev, MAX_PACKET_LEN);
                 if (unlikely(!skb))
@@ -221,23 +224,22 @@ static void free_old_xmit_skbs(struct virtnet_info *vi)
         while ((skb = vi->svq->vq_ops->get_buf(vi->svq, &len)) != NULL) {
                 pr_debug("Sent skb %p\n", skb);
                 __skb_unlink(skb, &vi->send);
-                vi->dev->stats.tx_bytes += len;
+                vi->dev->stats.tx_bytes += skb->len;
                 vi->dev->stats.tx_packets++;
                 kfree_skb(skb);
         }
 }
 
-static int start_xmit(struct sk_buff *skb, struct net_device *dev)
+static int xmit_skb(struct virtnet_info *vi, struct sk_buff *skb)
 {
-        struct virtnet_info *vi = netdev_priv(dev);
-        int num, err;
-        struct scatterlist sg[1+MAX_SKB_FRAGS];
+        int num;
+        struct scatterlist sg[2+MAX_SKB_FRAGS];
         struct virtio_net_hdr *hdr;
         const unsigned char *dest = ((struct ethhdr *)skb->data)->h_dest;
 
-        sg_init_table(sg, 1+MAX_SKB_FRAGS);
+        sg_init_table(sg, 2+MAX_SKB_FRAGS);
 
-        pr_debug("%s: xmit %p " MAC_FMT "\n", dev->name, skb,
+        pr_debug("%s: xmit %p " MAC_FMT "\n", vi->dev->name, skb,
                  dest[0], dest[1], dest[2],
                  dest[3], dest[4], dest[5]);
 
@@ -272,30 +274,51 @@ static int start_xmit(struct sk_buff *skb, struct net_device *dev)
 
         vnet_hdr_to_sg(sg, skb);
         num = skb_to_sgvec(skb, sg+1, 0, skb->len) + 1;
-        __skb_queue_head(&vi->send, skb);
+
+        return vi->svq->vq_ops->add_buf(vi->svq, sg, num, 0, skb);
+}
+
+static int start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+        struct virtnet_info *vi = netdev_priv(dev);
 
 again:
         /* Free up any pending old buffers before queueing new ones. */
         free_old_xmit_skbs(vi);
-        err = vi->svq->vq_ops->add_buf(vi->svq, sg, num, 0, skb);
-        if (err) {
-                pr_debug("%s: virtio not prepared to send\n", dev->name);
-                netif_stop_queue(dev);
-
-                /* Activate callback for using skbs: if this returns false it
-                 * means some were used in the meantime. */
-                if (unlikely(!vi->svq->vq_ops->enable_cb(vi->svq))) {
-                        vi->svq->vq_ops->disable_cb(vi->svq);
-                        netif_start_queue(dev);
-                        goto again;
+
+        /* If we has a buffer left over from last time, send it now. */
+        if (vi->last_xmit_skb) {
+                if (xmit_skb(vi, vi->last_xmit_skb) != 0) {
+                        /* Drop this skb: we only queue one. */
+                        vi->dev->stats.tx_dropped++;
+                        kfree_skb(skb);
+                        goto stop_queue;
                 }
-                __skb_unlink(skb, &vi->send);
+                vi->last_xmit_skb = NULL;
+        }
 
-                return NETDEV_TX_BUSY;
+        /* Put new one in send queue and do transmit */
+        __skb_queue_head(&vi->send, skb);
+        if (xmit_skb(vi, skb) != 0) {
+                vi->last_xmit_skb = skb;
+                goto stop_queue;
         }
+done:
         vi->svq->vq_ops->kick(vi->svq);
-
-        return 0;
+        return NETDEV_TX_OK;
+
+stop_queue:
+        pr_debug("%s: virtio not prepared to send\n", dev->name);
+        netif_stop_queue(dev);
+
+        /* Activate callback for using skbs: if this returns false it
+         * means some were used in the meantime. */
+        if (unlikely(!vi->svq->vq_ops->enable_cb(vi->svq))) {
+                vi->svq->vq_ops->disable_cb(vi->svq);
+                netif_start_queue(dev);
+                goto again;
+        }
+        goto done;
 }
 
 #ifdef CONFIG_NET_POLL_CONTROLLER
@@ -355,17 +378,26 @@ static int virtnet_probe(struct virtio_device *vdev)
         SET_NETDEV_DEV(dev, &vdev->dev);
 
         /* Do we support "hardware" checksums? */
-        if (csum && vdev->config->feature(vdev, VIRTIO_NET_F_CSUM)) {
+        if (csum && virtio_has_feature(vdev, VIRTIO_NET_F_CSUM)) {
                 /* This opens up the world of extra features. */
                 dev->features |= NETIF_F_HW_CSUM|NETIF_F_SG|NETIF_F_FRAGLIST;
-                if (gso && vdev->config->feature(vdev, VIRTIO_NET_F_GSO)) {
+                if (gso && virtio_has_feature(vdev, VIRTIO_NET_F_GSO)) {
                         dev->features |= NETIF_F_TSO | NETIF_F_UFO
                                 | NETIF_F_TSO_ECN | NETIF_F_TSO6;
                 }
+                /* Individual feature bits: what can host handle? */
+                if (gso && virtio_has_feature(vdev, VIRTIO_NET_F_HOST_TSO4))
+                        dev->features |= NETIF_F_TSO;
+                if (gso && virtio_has_feature(vdev, VIRTIO_NET_F_HOST_TSO6))
+                        dev->features |= NETIF_F_TSO6;
+                if (gso && virtio_has_feature(vdev, VIRTIO_NET_F_HOST_ECN))
+                        dev->features |= NETIF_F_TSO_ECN;
+                if (gso && virtio_has_feature(vdev, VIRTIO_NET_F_HOST_UFO))
+                        dev->features |= NETIF_F_UFO;
         }
 
         /* Configuration may specify what MAC to use.  Otherwise random. */
-        if (vdev->config->feature(vdev, VIRTIO_NET_F_MAC)) {
+        if (virtio_has_feature(vdev, VIRTIO_NET_F_MAC)) {
                 vdev->config->get(vdev,
                                   offsetof(struct virtio_net_config, mac),
                                   dev->dev_addr, dev->addr_len);
@@ -454,7 +486,15 @@ static struct virtio_device_id id_table[] = {
         { 0 },
 };
 
+static unsigned int features[] = {
+        VIRTIO_NET_F_CSUM, VIRTIO_NET_F_GSO, VIRTIO_NET_F_MAC,
+        VIRTIO_NET_F_HOST_TSO4, VIRTIO_NET_F_HOST_UFO, VIRTIO_NET_F_HOST_TSO6,
+        VIRTIO_NET_F_HOST_ECN,
+};
+
 static struct virtio_driver virtio_net = {
+        .feature_table = features,
+        .feature_table_size = ARRAY_SIZE(features),
         .driver.name =  KBUILD_MODNAME,
         .driver.owner = THIS_MODULE,
         .id_table =     id_table,
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 4a55bf380957..3706ce7972dd 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -842,13 +842,25 @@ static void set_pcie_port_type(struct pci_dev *pdev)
  * reading the dword at 0x100 which must either be 0 or a valid extended
  * capability header.
  */
-int pci_cfg_space_size_ext(struct pci_dev *dev, unsigned check_exp_pcix)
+int pci_cfg_space_size_ext(struct pci_dev *dev)
 {
-        int pos;
         u32 status;
 
-        if (!check_exp_pcix)
-                goto skip;
+        if (pci_read_config_dword(dev, 256, &status) != PCIBIOS_SUCCESSFUL)
+                goto fail;
+        if (status == 0xffffffff)
+                goto fail;
+
+        return PCI_CFG_SPACE_EXP_SIZE;
+
+ fail:
+        return PCI_CFG_SPACE_SIZE;
+}
+
+int pci_cfg_space_size(struct pci_dev *dev)
+{
+        int pos;
+        u32 status;
 
         pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
         if (!pos) {
@@ -861,23 +873,12 @@ int pci_cfg_space_size_ext(struct pci_dev *dev, unsigned check_exp_pcix)
                         goto fail;
         }
 
- skip:
-        if (pci_read_config_dword(dev, 256, &status) != PCIBIOS_SUCCESSFUL)
-                goto fail;
-        if (status == 0xffffffff)
-                goto fail;
-
-        return PCI_CFG_SPACE_EXP_SIZE;
+        return pci_cfg_space_size_ext(dev);
 
  fail:
         return PCI_CFG_SPACE_SIZE;
 }
 
-int pci_cfg_space_size(struct pci_dev *dev)
-{
-        return pci_cfg_space_size_ext(dev, 1);
-}
-
 static void pci_release_bus_bridge_dev(struct device *dev)
 {
         kfree(dev);
diff --git a/drivers/pcmcia/au1000_db1x00.c b/drivers/pcmcia/au1000_db1x00.c
index 74e051535d6c..c78d77fd7e3b 100644
--- a/drivers/pcmcia/au1000_db1x00.c
+++ b/drivers/pcmcia/au1000_db1x00.c
@@ -194,7 +194,7 @@ db1x00_pcmcia_configure_socket(struct au1000_pcmcia_socket *skt, struct socket_s
                                 default:
                                         pwr |= SET_VCC_VPP(0,0,sock);
                                         printk("%s: bad Vcc/Vpp (%d:%d)\n",
-                                                        __FUNCTION__,
+                                                        __func__,
                                                         state->Vcc,
                                                         state->Vpp);
                                         break;
@@ -215,7 +215,7 @@ db1x00_pcmcia_configure_socket(struct au1000_pcmcia_socket *skt, struct socket_s
                                 default:
                                         pwr |= SET_VCC_VPP(0,0,sock);
                                         printk("%s: bad Vcc/Vpp (%d:%d)\n",
-                                                        __FUNCTION__,
+                                                        __func__,
                                                         state->Vcc,
                                                         state->Vpp);
                                         break;
@@ -224,7 +224,7 @@ db1x00_pcmcia_configure_socket(struct au1000_pcmcia_socket *skt, struct socket_s
                 default: /* what's this ? */
                         pwr |= SET_VCC_VPP(0,0,sock);
                         printk(KERN_ERR "%s: bad Vcc %d\n",
-                                        __FUNCTION__, state->Vcc);
+                                        __func__, state->Vcc);
                         break;
         }
 
diff --git a/drivers/pcmcia/au1000_generic.c b/drivers/pcmcia/au1000_generic.c
index b693367d38cd..75e8f8505e47 100644
--- a/drivers/pcmcia/au1000_generic.c
+++ b/drivers/pcmcia/au1000_generic.c
@@ -41,6 +41,7 @@
 #include <linux/notifier.h>
 #include <linux/interrupt.h>
 #include <linux/spinlock.h>
+#include <linux/mutex.h>
 #include <linux/platform_device.h>
 
 #include <asm/io.h>
@@ -71,7 +72,7 @@ extern struct au1000_pcmcia_socket au1000_pcmcia_socket[];
 u32 *pcmcia_base_vaddrs[2];
 extern const unsigned long mips_io_port_base;
 
-DECLARE_MUTEX(pcmcia_sockets_lock);
+static DEFINE_MUTEX(pcmcia_sockets_lock);
 
 static int (*au1x00_pcmcia_hw_init[])(struct device *dev) = {
         au1x_board_init,
@@ -472,7 +473,7 @@ int au1x00_drv_pcmcia_remove(struct device *dev)
         struct skt_dev_info *sinfo = dev_get_drvdata(dev);
         int i;
 
-        down(&pcmcia_sockets_lock);
+        mutex_lock(&pcmcia_sockets_lock);
         dev_set_drvdata(dev, NULL);
 
         for (i = 0; i < sinfo->nskt; i++) {
@@ -488,7 +489,7 @@ int au1x00_drv_pcmcia_remove(struct device *dev)
         }
 
         kfree(sinfo);
-        up(&pcmcia_sockets_lock);
+        mutex_unlock(&pcmcia_sockets_lock);
         return 0;
 }
 
@@ -501,13 +502,13 @@ static int au1x00_drv_pcmcia_probe(struct device *dev)
 {
         int i, ret = -ENODEV;
 
-        down(&pcmcia_sockets_lock);
+        mutex_lock(&pcmcia_sockets_lock);
         for (i=0; i < ARRAY_SIZE(au1x00_pcmcia_hw_init); i++) {
                 ret = au1x00_pcmcia_hw_init[i](dev);
                 if (ret == 0)
                         break;
         }
-        up(&pcmcia_sockets_lock);
+        mutex_unlock(&pcmcia_sockets_lock);
         return ret;
 }
 
diff --git a/drivers/pcmcia/au1000_pb1x00.c b/drivers/pcmcia/au1000_pb1x00.c
index 86c0808d6a05..157e41423a0a 100644
--- a/drivers/pcmcia/au1000_pb1x00.c
+++ b/drivers/pcmcia/au1000_pb1x00.c
@@ -244,7 +244,7 @@ pb1x00_pcmcia_configure_socket(const struct pcmcia_configure *configure)
                                         pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,
                                                         configure->sock);
                                         printk("%s: bad Vcc/Vpp (%d:%d)\n", 
-                                                        __FUNCTION__, 
+                                                        __func__,
                                                         configure->vcc, 
                                                         configure->vpp);
                                         break;
@@ -272,7 +272,7 @@ pb1x00_pcmcia_configure_socket(const struct pcmcia_configure *configure)
                                         pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,
                                                         configure->sock);
                                         printk("%s: bad Vcc/Vpp (%d:%d)\n", 
-                                                        __FUNCTION__, 
+                                                        __func__,
                                                         configure->vcc, 
                                                         configure->vpp);
                                         break;
@@ -300,7 +300,7 @@ pb1x00_pcmcia_configure_socket(const struct pcmcia_configure *configure)
                                         pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,
                                                         configure->sock);
                                         printk("%s: bad Vcc/Vpp (%d:%d)\n", 
-                                                        __FUNCTION__, 
+                                                        __func__,
                                                         configure->vcc, 
                                                         configure->vpp);
                                         break;
@@ -309,7 +309,7 @@ pb1x00_pcmcia_configure_socket(const struct pcmcia_configure *configure)
                 default: /* what's this ? */
                         pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,configure->sock);
                         printk(KERN_ERR "%s: bad Vcc %d\n", 
-                                        __FUNCTION__, configure->vcc);
+                                        __func__, configure->vcc);
                         break;
         }
 
@@ -353,7 +353,7 @@ pb1x00_pcmcia_configure_socket(const struct pcmcia_configure *configure)
                                 default:
                                         pcr |= SET_VCC_VPP(0,0);
                                         printk("%s: bad Vcc/Vpp (%d:%d)\n", 
-                                                        __FUNCTION__, 
+                                                        __func__,
                                                         configure->vcc, 
                                                         configure->vpp);
                                         break;
@@ -374,7 +374,7 @@ pb1x00_pcmcia_configure_socket(const struct pcmcia_configure *configure)
                                 default:
                                         pcr |= SET_VCC_VPP(0,0);
                                         printk("%s: bad Vcc/Vpp (%d:%d)\n", 
-                                                        __FUNCTION__, 
+                                                        __func__,
                                                         configure->vcc, 
                                                         configure->vpp);
                                         break;
@@ -383,7 +383,7 @@ pb1x00_pcmcia_configure_socket(const struct pcmcia_configure *configure)
                 default: /* what's this ? */
                         pcr |= SET_VCC_VPP(0,0);
                         printk(KERN_ERR "%s: bad Vcc %d\n", 
-                                        __FUNCTION__, configure->vcc);
+                                        __func__, configure->vcc);
                         break;
         }
 
diff --git a/drivers/pcmcia/au1000_xxs1500.c b/drivers/pcmcia/au1000_xxs1500.c
index ce9d5c44a7b5..c78ed5347510 100644
--- a/drivers/pcmcia/au1000_xxs1500.c
+++ b/drivers/pcmcia/au1000_xxs1500.c
@@ -56,7 +56,7 @@
 #define PCMCIA_IRQ              AU1000_GPIO_4
 
 #if 0
-#define DEBUG(x,args...)        printk(__FUNCTION__ ": " x,##args)
+#define DEBUG(x, args...)       printk(__func__ ": " x, ##args)
 #else
 #define DEBUG(x,args...)
 #endif
diff --git a/drivers/pcmcia/cardbus.c b/drivers/pcmcia/cardbus.c
index 714baaeb6da1..fb2f38dc92c5 100644
--- a/drivers/pcmcia/cardbus.c
+++ b/drivers/pcmcia/cardbus.c
@@ -209,7 +209,7 @@ static void cardbus_assign_irqs(struct pci_bus *bus, int irq)
         }
 }
 
-int cb_alloc(struct pcmcia_socket * s)
+int __ref cb_alloc(struct pcmcia_socket * s)
 {
         struct pci_bus *bus = s->cb_dev->subordinate;
         struct pci_dev *dev;
diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c
index 5a85871f5ee9..e40775443d04 100644
--- a/drivers/pcmcia/ds.c
+++ b/drivers/pcmcia/ds.c
@@ -1520,7 +1520,7 @@ static void pcmcia_bus_remove_socket(struct device *dev,
 
 
 /* the pcmcia_bus_interface is used to handle pcmcia socket devices */
-static struct class_interface pcmcia_bus_interface = {
+static struct class_interface pcmcia_bus_interface __refdata = {
         .class = &pcmcia_socket_class,
         .add_dev = &pcmcia_bus_add_socket,
         .remove_dev = &pcmcia_bus_remove_socket,
diff --git a/drivers/pcmcia/i82092.c b/drivers/pcmcia/i82092.c
index e54ecc580d9e..e13618656ff7 100644
--- a/drivers/pcmcia/i82092.c
+++ b/drivers/pcmcia/i82092.c
@@ -53,7 +53,7 @@ static int i82092aa_socket_resume (struct pci_dev *dev)
 }
 #endif
 
-static struct pci_driver i82092aa_pci_drv = {
+static struct pci_driver i82092aa_pci_driver = {
         .name           = "i82092aa",
         .id_table       = i82092aa_pci_ids,
         .probe          = i82092aa_pci_probe,
@@ -714,13 +714,13 @@ static int i82092aa_set_mem_map(struct pcmcia_socket *socket, struct pccard_mem_
 
 static int i82092aa_module_init(void)
 {
-        return pci_register_driver(&i82092aa_pci_drv);
+        return pci_register_driver(&i82092aa_pci_driver);
 }
 
 static void i82092aa_module_exit(void)
 {
         enter("i82092aa_module_exit");
-        pci_unregister_driver(&i82092aa_pci_drv);
+        pci_unregister_driver(&i82092aa_pci_driver);
         if (sockets[0].io_base>0)
                          release_region(sockets[0].io_base, 2);
         leave("i82092aa_module_exit");
diff --git a/drivers/pcmcia/omap_cf.c b/drivers/pcmcia/omap_cf.c
index bb6db3a582b2..46314b420765 100644
--- a/drivers/pcmcia/omap_cf.c
+++ b/drivers/pcmcia/omap_cf.c
@@ -153,7 +153,7 @@ omap_cf_set_socket(struct pcmcia_socket *sock, struct socket_state_t *s)
 
 static int omap_cf_ss_suspend(struct pcmcia_socket *s)
 {
-        pr_debug("%s: %s\n", driver_name, __FUNCTION__);
+        pr_debug("%s: %s\n", driver_name, __func__);
         return omap_cf_set_socket(s, &dead_socket);
 }
 
diff --git a/drivers/pcmcia/pd6729.c b/drivers/pcmcia/pd6729.c
index abc10fe49bd8..8bed1dab9039 100644
--- a/drivers/pcmcia/pd6729.c
+++ b/drivers/pcmcia/pd6729.c
@@ -778,7 +778,7 @@ static struct pci_device_id pd6729_pci_ids[] = {
 };
 MODULE_DEVICE_TABLE(pci, pd6729_pci_ids);
 
-static struct pci_driver pd6729_pci_drv = {
+static struct pci_driver pd6729_pci_driver = {
         .name           = "pd6729",
         .id_table       = pd6729_pci_ids,
         .probe          = pd6729_pci_probe,
@@ -791,12 +791,12 @@ static struct pci_driver pd6729_pci_drv = {
 
 static int pd6729_module_init(void)
 {
-        return pci_register_driver(&pd6729_pci_drv);
+        return pci_register_driver(&pd6729_pci_driver);
 }
 
 static void pd6729_module_exit(void)
 {
-        pci_unregister_driver(&pd6729_pci_drv);
+        pci_unregister_driver(&pd6729_pci_driver);
 }
 
 module_init(pd6729_module_init);
diff --git a/drivers/pcmcia/pxa2xx_lubbock.c b/drivers/pcmcia/pxa2xx_lubbock.c
index 4a05802213c8..881ec8a8e389 100644
--- a/drivers/pcmcia/pxa2xx_lubbock.c
+++ b/drivers/pcmcia/pxa2xx_lubbock.c
@@ -87,7 +87,7 @@ lubbock_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
 
                 default:
                         printk(KERN_ERR "%s(): unrecognized Vcc %u\n",
-                               __FUNCTION__, state->Vcc);
+                               __func__, state->Vcc);
                         ret = -1;
                 }
 
@@ -104,7 +104,7 @@ lubbock_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
                                 pa_dwr_set |= GPIO_A0;
                         else {
                                 printk(KERN_ERR "%s(): unrecognized Vpp %u\n",
-                                       __FUNCTION__, state->Vpp);
+                                       __func__, state->Vpp);
                                 ret = -1;
                                 break;
                         }
@@ -128,14 +128,14 @@ lubbock_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
 
                 default:
                         printk(KERN_ERR "%s(): unrecognized Vcc %u\n",
-                               __FUNCTION__, state->Vcc);
+                               __func__, state->Vcc);
                         ret = -1;
                         break;
                 }
 
                 if (state->Vpp != state->Vcc && state->Vpp != 0) {
                         printk(KERN_ERR "%s(): CF slot cannot support Vpp %u\n",
-                               __FUNCTION__, state->Vpp);
+                               __func__, state->Vpp);
                         ret = -1;
                         break;
                 }
diff --git a/drivers/pcmcia/pxa2xx_mainstone.c b/drivers/pcmcia/pxa2xx_mainstone.c
index 6fa5eaaab8af..145b85e0f02c 100644
--- a/drivers/pcmcia/pxa2xx_mainstone.c
+++ b/drivers/pcmcia/pxa2xx_mainstone.c
@@ -99,7 +99,7 @@ static int mst_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
         case 50: power |= MST_PCMCIA_PWR_VCC_50; break;
         default:
                  printk(KERN_ERR "%s(): bad Vcc %u\n",
-                                 __FUNCTION__, state->Vcc);
+                                 __func__, state->Vcc);
                  ret = -1;
         }
 
@@ -111,7 +111,7 @@ static int mst_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
                           power |= MST_PCMCIA_PWR_VPP_VCC;
                   } else {
                           printk(KERN_ERR "%s(): bad Vpp %u\n",
-                                          __FUNCTION__, state->Vpp);
+                                          __func__, state->Vpp);
                           ret = -1;
                   }
         }
diff --git a/drivers/pcmcia/rsrc_nonstatic.c b/drivers/pcmcia/rsrc_nonstatic.c
index a8d100707721..0fcf763b9175 100644
--- a/drivers/pcmcia/rsrc_nonstatic.c
+++ b/drivers/pcmcia/rsrc_nonstatic.c
@@ -1045,7 +1045,7 @@ static void __devexit pccard_sysfs_remove_rsrc(struct device *dev,
                 device_remove_file(dev, *attr);
 }
 
-static struct class_interface pccard_rsrc_interface = {
+static struct class_interface pccard_rsrc_interface __refdata = {
         .class = &pcmcia_socket_class,
         .add_dev = &pccard_sysfs_add_rsrc,
         .remove_dev = __devexit_p(&pccard_sysfs_remove_rsrc),
diff --git a/drivers/pcmcia/sa1100_assabet.c b/drivers/pcmcia/sa1100_assabet.c
index 7c57fdd3c8d7..ce133ce81c10 100644
--- a/drivers/pcmcia/sa1100_assabet.c
+++ b/drivers/pcmcia/sa1100_assabet.c
@@ -66,14 +66,14 @@ assabet_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_stat
 
         case 50:
                 printk(KERN_WARNING "%s(): CS asked for 5V, applying 3.3V...\n",
-                        __FUNCTION__);
+                        __func__);
 
         case 33:  /* Can only apply 3.3V to the CF slot. */
                 mask = ASSABET_BCR_CF_PWR;
                 break;
 
         default:
-                printk(KERN_ERR "%s(): unrecognized Vcc %u\n", __FUNCTION__,
+                printk(KERN_ERR "%s(): unrecognized Vcc %u\n", __func__,
                         state->Vcc);
                 return -1;
         }
diff --git a/drivers/pcmcia/sa1100_badge4.c b/drivers/pcmcia/sa1100_badge4.c
index 62bfc7566ec2..607c3f326eca 100644
--- a/drivers/pcmcia/sa1100_badge4.c
+++ b/drivers/pcmcia/sa1100_badge4.c
@@ -82,14 +82,14 @@ badge4_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_state
         case 0:
                 if ((state->Vcc != 0) &&
                     (state->Vcc != badge4_pcmvcc)) {
-                        complain_about_jumpering(__FUNCTION__, "pcmvcc",
+                        complain_about_jumpering(__func__, "pcmvcc",
                                                  badge4_pcmvcc, state->Vcc);
                         // Apply power regardless of the jumpering.
                         // return -1;
                 }
                 if ((state->Vpp != 0) &&
                     (state->Vpp != badge4_pcmvpp)) {
-                        complain_about_jumpering(__FUNCTION__, "pcmvpp",
+                        complain_about_jumpering(__func__, "pcmvpp",
                                                  badge4_pcmvpp, state->Vpp);
                         return -1;
                 }
@@ -98,7 +98,7 @@ badge4_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_state
         case 1:
                 if ((state->Vcc != 0) &&
                     (state->Vcc != badge4_cfvcc)) {
-                        complain_about_jumpering(__FUNCTION__, "cfvcc",
+                        complain_about_jumpering(__func__, "cfvcc",
                                                  badge4_cfvcc, state->Vcc);
                         return -1;
                 }
@@ -143,7 +143,7 @@ int pcmcia_badge4_init(struct device *dev)
         if (machine_is_badge4()) {
                 printk(KERN_INFO
                        "%s: badge4_pcmvcc=%d, badge4_pcmvpp=%d, badge4_cfvcc=%d\n",
-                       __FUNCTION__,
+                       __func__,
                        badge4_pcmvcc, badge4_pcmvpp, badge4_cfvcc);
 
                 ret = sa11xx_drv_pcmcia_probe(dev, &badge4_pcmcia_ops, 0, 2);
diff --git a/drivers/pcmcia/sa1100_cerf.c b/drivers/pcmcia/sa1100_cerf.c
index 549a1529fe35..7c3951a2675d 100644
--- a/drivers/pcmcia/sa1100_cerf.c
+++ b/drivers/pcmcia/sa1100_cerf.c
@@ -63,7 +63,7 @@ cerf_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
 
         default:
                 printk(KERN_ERR "%s(): unrecognized Vcc %u\n",
-                        __FUNCTION__, state->Vcc);
+                        __func__, state->Vcc);
                 return -1;
         }
 
diff --git a/drivers/pcmcia/sa1100_jornada720.c b/drivers/pcmcia/sa1100_jornada720.c
index 6284c35dabc6..2167e6714d2d 100644
--- a/drivers/pcmcia/sa1100_jornada720.c
+++ b/drivers/pcmcia/sa1100_jornada720.c
@@ -42,7 +42,7 @@ jornada720_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_s
   unsigned int pa_dwr_mask, pa_dwr_set;
   int ret;
 
-printk("%s(): config socket %d vcc %d vpp %d\n", __FUNCTION__,
+printk("%s(): config socket %d vcc %d vpp %d\n", __func__,
         skt->nr, state->Vcc, state->Vpp);
 
   switch (skt->nr) {
@@ -74,7 +74,7 @@ printk("%s(): config socket %d vcc %d vpp %d\n", __FUNCTION__,
 
   if (state->Vpp != state->Vcc && state->Vpp != 0) {
     printk(KERN_ERR "%s(): slot cannot support VPP %u\n",
-           __FUNCTION__, state->Vpp);
+           __func__, state->Vpp);
     return -1;
   }
 
diff --git a/drivers/pcmcia/sa1100_neponset.c b/drivers/pcmcia/sa1100_neponset.c
index 5bc9e9532b9d..687492fcd5b4 100644
--- a/drivers/pcmcia/sa1100_neponset.c
+++ b/drivers/pcmcia/sa1100_neponset.c
@@ -59,7 +59,7 @@ neponset_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_sta
                         ncr_set = NCR_A0VPP;
                 else {
                         printk(KERN_ERR "%s(): unrecognized VPP %u\n",
-                               __FUNCTION__, state->Vpp);
+                               __func__, state->Vpp);
                         return -1;
                 }
                 break;
@@ -71,7 +71,7 @@ neponset_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_sta
 
                 if (state->Vpp != state->Vcc && state->Vpp != 0) {
                         printk(KERN_ERR "%s(): CF slot cannot support VPP %u\n",
-                               __FUNCTION__, state->Vpp);
+                               __func__, state->Vpp);
                         return -1;
                 }
                 break;
diff --git a/drivers/pcmcia/sa1100_shannon.c b/drivers/pcmcia/sa1100_shannon.c
index 9456f5478d09..494912fccc0d 100644
--- a/drivers/pcmcia/sa1100_shannon.c
+++ b/drivers/pcmcia/sa1100_shannon.c
@@ -73,19 +73,19 @@ shannon_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
 {
         switch (state->Vcc) {
         case 0: /* power off */
-                printk(KERN_WARNING "%s(): CS asked for 0V, still applying 3.3V..\n", __FUNCTION__);
+                printk(KERN_WARNING "%s(): CS asked for 0V, still applying 3.3V..\n", __func__);
                 break;
         case 50:
-                printk(KERN_WARNING "%s(): CS asked for 5V, applying 3.3V..\n", __FUNCTION__);
+                printk(KERN_WARNING "%s(): CS asked for 5V, applying 3.3V..\n", __func__);
         case 33:
                 break;
         default:
                 printk(KERN_ERR "%s(): unrecognized Vcc %u\n",
-                       __FUNCTION__, state->Vcc);
+                       __func__, state->Vcc);
                 return -1;
         }
 
-        printk(KERN_WARNING "%s(): Warning, Can't perform reset\n", __FUNCTION__);
+        printk(KERN_WARNING "%s(): Warning, Can't perform reset\n", __func__);
         
         /* Silently ignore Vpp, output enable, speaker enable. */
 
diff --git a/drivers/pcmcia/sa1100_simpad.c b/drivers/pcmcia/sa1100_simpad.c
index 04d6f7f75f78..42567de894b9 100644
--- a/drivers/pcmcia/sa1100_simpad.c
+++ b/drivers/pcmcia/sa1100_simpad.c
@@ -90,7 +90,7 @@ simpad_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
 
         default:
                 printk(KERN_ERR "%s(): unrecognized Vcc %u\n",
-                        __FUNCTION__, state->Vcc);
+                        __func__, state->Vcc);
                 clear_cs3_bit(VCC_3V_EN|VCC_5V_EN|EN0|EN1);
                 local_irq_restore(flags);
                 return -1;
diff --git a/drivers/pcmcia/soc_common.c b/drivers/pcmcia/soc_common.c
index aa7779d89752..420a77540f41 100644
--- a/drivers/pcmcia/soc_common.c
+++ b/drivers/pcmcia/soc_common.c
@@ -37,6 +37,7 @@
 #include <linux/kernel.h>
 #include <linux/timer.h>
 #include <linux/mm.h>
+#include <linux/mutex.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/spinlock.h>
@@ -353,7 +354,7 @@ soc_common_pcmcia_set_io_map(struct pcmcia_socket *sock, struct pccard_io_map *m
                 (map->flags&MAP_PREFETCH)?"PREFETCH ":"");
 
         if (map->map >= MAX_IO_WIN) {
-                printk(KERN_ERR "%s(): map (%d) out of range\n", __FUNCTION__,
+                printk(KERN_ERR "%s(): map (%d) out of range\n", __func__,
                        map->map);
                 return -1;
         }
@@ -578,7 +579,7 @@ EXPORT_SYMBOL(soc_pcmcia_enable_irqs);
 
 
 LIST_HEAD(soc_pcmcia_sockets);
-DECLARE_MUTEX(soc_pcmcia_sockets_lock);
+static DEFINE_MUTEX(soc_pcmcia_sockets_lock);
 
 static const char *skt_names[] = {
         "PCMCIA socket 0",
@@ -601,11 +602,11 @@ soc_pcmcia_notifier(struct notifier_block *nb, unsigned long val, void *data)
         struct cpufreq_freqs *freqs = data;
         int ret = 0;
 
-        down(&soc_pcmcia_sockets_lock);
+        mutex_lock(&soc_pcmcia_sockets_lock);
         list_for_each_entry(skt, &soc_pcmcia_sockets, node)
                 if ( skt->ops->frequency_change )
                         ret += skt->ops->frequency_change(skt, val, freqs);
-        up(&soc_pcmcia_sockets_lock);
+        mutex_unlock(&soc_pcmcia_sockets_lock);
 
         return ret;
 }
@@ -642,7 +643,7 @@ int soc_common_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops
         struct soc_pcmcia_socket *skt;
         int ret, i;
 
-        down(&soc_pcmcia_sockets_lock);
+        mutex_lock(&soc_pcmcia_sockets_lock);
 
         sinfo = kzalloc(SKT_DEV_INFO_SIZE(nr), GFP_KERNEL);
         if (!sinfo) {
@@ -782,7 +783,7 @@ int soc_common_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops
         kfree(sinfo);
 
  out:
-        up(&soc_pcmcia_sockets_lock);
+        mutex_unlock(&soc_pcmcia_sockets_lock);
         return ret;
 }
 
@@ -793,7 +794,7 @@ int soc_common_drv_pcmcia_remove(struct device *dev)
 
         dev_set_drvdata(dev, NULL);
 
-        down(&soc_pcmcia_sockets_lock);
+        mutex_lock(&soc_pcmcia_sockets_lock);
         for (i = 0; i < sinfo->nskt; i++) {
                 struct soc_pcmcia_socket *skt = &sinfo->skt[i];
 
@@ -818,7 +819,7 @@ int soc_common_drv_pcmcia_remove(struct device *dev)
         if (list_empty(&soc_pcmcia_sockets))
                 soc_pcmcia_cpufreq_unregister();
 
-        up(&soc_pcmcia_sockets_lock);
+        mutex_unlock(&soc_pcmcia_sockets_lock);
 
         kfree(sinfo);
 
diff --git a/drivers/pcmcia/soc_common.h b/drivers/pcmcia/soc_common.h
index 6f14126889b3..1edc1da9d353 100644
--- a/drivers/pcmcia/soc_common.h
+++ b/drivers/pcmcia/soc_common.h
@@ -133,7 +133,6 @@ extern void soc_common_pcmcia_get_timing(struct soc_pcmcia_socket *, struct soc_
 
 
 extern struct list_head soc_pcmcia_sockets;
-extern struct semaphore soc_pcmcia_sockets_lock;
 
 extern int soc_common_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops, int first, int nr);
 extern int soc_common_drv_pcmcia_remove(struct device *dev);
diff --git a/drivers/pnp/pnpbios/rsparser.c b/drivers/pnp/pnpbios/rsparser.c
index 2e2c457a0fea..5ff9a4c0447e 100644
--- a/drivers/pnp/pnpbios/rsparser.c
+++ b/drivers/pnp/pnpbios/rsparser.c
@@ -591,7 +591,8 @@ static void pnpbios_encode_irq(struct pnp_dev *dev, unsigned char *p,
         p[1] = map & 0xff;
         p[2] = (map >> 8) & 0xff;
 
-        dev_dbg(&dev->dev, "  encode irq %d\n", res->start);
+        dev_dbg(&dev->dev, "  encode irq %llu\n",
+                (unsigned long long)res->start);
 }
 
 static void pnpbios_encode_dma(struct pnp_dev *dev, unsigned char *p,
@@ -602,7 +603,8 @@ static void pnpbios_encode_dma(struct pnp_dev *dev, unsigned char *p,
         map = 1 << res->start;
         p[1] = map & 0xff;
 
-        dev_dbg(&dev->dev, "  encode dma %d\n", res->start);
+        dev_dbg(&dev->dev, "  encode dma %llu\n",
+                (unsigned long long)res->start);
 }
 
 static void pnpbios_encode_port(struct pnp_dev *dev, unsigned char *p,
diff --git a/drivers/power/pda_power.c b/drivers/power/pda_power.c
index c8aa55b81fd8..82810b7bff9c 100644
--- a/drivers/power/pda_power.c
+++ b/drivers/power/pda_power.c
@@ -209,6 +209,12 @@ static int pda_power_probe(struct platform_device *pdev)
 
         pdata = pdev->dev.platform_data;
 
+        if (pdata->init) {
+                ret = pdata->init(dev);
+                if (ret < 0)
+                        goto init_failed;
+        }
+
         update_status();
         update_charger();
 
@@ -298,6 +304,9 @@ ac_irq_failed:
         if (pdata->is_ac_online)
                 power_supply_unregister(&pda_psy_ac);
 ac_supply_failed:
+        if (pdata->exit)
+                pdata->exit(dev);
+init_failed:
 wrongid:
         return ret;
 }
@@ -318,6 +327,8 @@ static int pda_power_remove(struct platform_device *pdev)
                 power_supply_unregister(&pda_psy_usb);
         if (pdata->is_ac_online)
                 power_supply_unregister(&pda_psy_ac);
+        if (pdata->exit)
+                pdata->exit(dev);
 
         return 0;
 }
diff --git a/drivers/power/pmu_battery.c b/drivers/power/pmu_battery.c
index 60a8cf3a0431..9346a862f1f2 100644
--- a/drivers/power/pmu_battery.c
+++ b/drivers/power/pmu_battery.c
@@ -159,7 +159,7 @@ static int __init pmu_bat_init(void)
                 if (!pbat)
                         break;
 
-                sprintf(pbat->name, "PMU battery %d", i);
+                sprintf(pbat->name, "PMU_battery_%d", i);
                 pbat->bat.name = pbat->name;
                 pbat->bat.properties = pmu_bat_props;
                 pbat->bat.num_properties = ARRAY_SIZE(pmu_bat_props);
diff --git a/drivers/ps3/ps3-lpm.c b/drivers/ps3/ps3-lpm.c
index 6c9592ce4996..85edf945ab86 100644
--- a/drivers/ps3/ps3-lpm.c
+++ b/drivers/ps3/ps3-lpm.c
@@ -22,6 +22,7 @@
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/uaccess.h>
+#include <asm/time.h>
 #include <asm/ps3.h>
 #include <asm/lv1call.h>
 #include <asm/cell-pmu.h>
diff --git a/drivers/ps3/ps3-sys-manager.c b/drivers/ps3/ps3-sys-manager.c
index 7605453b74fd..f17513dd9d4b 100644
--- a/drivers/ps3/ps3-sys-manager.c
+++ b/drivers/ps3/ps3-sys-manager.c
@@ -184,10 +184,7 @@ enum ps3_sys_manager_next_op {
 
 /**
  * enum ps3_sys_manager_wake_source - Next-op wakeup source (bit position mask).
- * @PS3_SM_WAKE_DEFAULT: Disk insert, power button, eject button, IR
- * controller, and bluetooth controller.
- * @PS3_SM_WAKE_RTC:
- * @PS3_SM_WAKE_RTC_ERROR:
+ * @PS3_SM_WAKE_DEFAULT: Disk insert, power button, eject button.
  * @PS3_SM_WAKE_W_O_L: Ether or wireless LAN.
  * @PS3_SM_WAKE_P_O_R: Power on reset.
  *
@@ -200,8 +197,6 @@ enum ps3_sys_manager_next_op {
 enum ps3_sys_manager_wake_source {
         /* version 3 */
         PS3_SM_WAKE_DEFAULT   = 0,
-        PS3_SM_WAKE_RTC       = 0x00000040,
-        PS3_SM_WAKE_RTC_ERROR = 0x00000080,
         PS3_SM_WAKE_W_O_L     = 0x00000400,
         PS3_SM_WAKE_P_O_R     = 0x80000000,
 };
diff --git a/drivers/s390/scsi/zfcp_dbf.c b/drivers/s390/scsi/zfcp_dbf.c
index 37b85c67b11d..c8bad675dbd1 100644
--- a/drivers/s390/scsi/zfcp_dbf.c
+++ b/drivers/s390/scsi/zfcp_dbf.c
@@ -1055,7 +1055,7 @@ static void zfcp_scsi_dbf_event(const char *tag, const char *tag2, int level,
                                 rec->scsi_result = scsi_cmnd->result;
                                 rec->scsi_cmnd = (unsigned long)scsi_cmnd;
                                 rec->scsi_serial = scsi_cmnd->serial_number;
-                                memcpy(rec->scsi_opcode, &scsi_cmnd->cmnd,
+                                memcpy(rec->scsi_opcode, scsi_cmnd->cmnd,
                                         min((int)scsi_cmnd->cmd_len,
                                                 ZFCP_DBF_SCSI_OPCODE));
                                 rec->scsi_retries = scsi_cmnd->retries;
diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c
index 9af2330f07a2..b2ea4ea051f5 100644
--- a/drivers/s390/scsi/zfcp_fsf.c
+++ b/drivers/s390/scsi/zfcp_fsf.c
@@ -4014,7 +4014,7 @@ zfcp_fsf_send_fcp_command_task_handler(struct zfcp_fsf_req *fsf_req)
                 ZFCP_LOG_TRACE("scpnt->result =0x%x, command was:\n",
                                scpnt->result);
                 ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_TRACE,
-                              (void *) &scpnt->cmnd, scpnt->cmd_len);
+                              scpnt->cmnd, scpnt->cmd_len);
 
                 ZFCP_LOG_TRACE("%i bytes sense data provided by FCP\n",
                                fcp_rsp_iu->fcp_sns_len);
diff --git a/drivers/scsi/53c700.c b/drivers/scsi/53c700.c
index f4c4fe90240a..f5a9addb7050 100644
--- a/drivers/scsi/53c700.c
+++ b/drivers/scsi/53c700.c
@@ -599,7 +599,7 @@ NCR_700_scsi_done(struct NCR_700_Host_Parameters *hostdata,
                         (struct NCR_700_command_slot *)SCp->host_scribble;
                 
                 dma_unmap_single(hostdata->dev, slot->pCmd,
-                                 sizeof(SCp->cmnd), DMA_TO_DEVICE);
+                                 MAX_COMMAND_SIZE, DMA_TO_DEVICE);
                 if (slot->flags == NCR_700_FLAG_AUTOSENSE) {
                         char *cmnd = NCR_700_get_sense_cmnd(SCp->device);
 #ifdef NCR_700_DEBUG
@@ -1004,7 +1004,7 @@ process_script_interrupt(__u32 dsps, __u32 dsp, struct scsi_cmnd *SCp,
                                  * here */
                                 NCR_700_unmap(hostdata, SCp, slot);
                                 dma_unmap_single(hostdata->dev, slot->pCmd,
-                                                 sizeof(SCp->cmnd),
+                                                 MAX_COMMAND_SIZE,
                                                  DMA_TO_DEVICE);
 
                                 cmnd[0] = REQUEST_SENSE;
@@ -1901,7 +1901,7 @@ NCR_700_queuecommand(struct scsi_cmnd *SCp, void (*done)(struct scsi_cmnd *))
         }
         slot->resume_offset = 0;
         slot->pCmd = dma_map_single(hostdata->dev, SCp->cmnd,
-                                    sizeof(SCp->cmnd), DMA_TO_DEVICE);
+                                    MAX_COMMAND_SIZE, DMA_TO_DEVICE);
         NCR_700_start_command(SCp);
         return 0;
 }
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 99c57b0c1d54..81ccbd7f9e34 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -504,10 +504,9 @@ config SCSI_AIC7XXX_OLD
 source "drivers/scsi/aic7xxx/Kconfig.aic79xx"
 source "drivers/scsi/aic94xx/Kconfig"
 
-# All the I2O code and drivers do not seem to be 64bit safe.
 config SCSI_DPT_I2O
         tristate "Adaptec I2O RAID support "
-        depends on !64BIT && SCSI && PCI && VIRT_TO_BUS
+        depends on SCSI && PCI && VIRT_TO_BUS
         help
           This driver supports all of Adaptec's I2O based RAID controllers as 
           well as the DPT SmartRaid V cards.  This is an Adaptec maintained
@@ -1680,6 +1679,7 @@ config MAC_SCSI
 config SCSI_MAC_ESP
         tristate "Macintosh NCR53c9[46] SCSI"
         depends on MAC && SCSI
+        select SCSI_SPI_ATTRS
         help
           This is the NCR 53c9x SCSI controller found on most of the 68040
           based Macintoshes.
diff --git a/drivers/scsi/a100u2w.c b/drivers/scsi/a100u2w.c
index 792b2e807bf3..ced3eebe252c 100644
--- a/drivers/scsi/a100u2w.c
+++ b/drivers/scsi/a100u2w.c
@@ -895,7 +895,7 @@ static void inia100_build_scb(struct orc_host * host, struct orc_scb * scb, stru
         } else {
                 scb->tag_msg = 0;       /* No tag support               */
         }
-        memcpy(&scb->cdb[0], &cmd->cmnd, scb->cdb_len);
+        memcpy(scb->cdb, cmd->cmnd, scb->cdb_len);
 }
 
 /**
diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c
index 460d4024c46c..aa4e77c25273 100644
--- a/drivers/scsi/aacraid/aachba.c
+++ b/drivers/scsi/aacraid/aachba.c
@@ -498,6 +498,11 @@ static void _aac_probe_container2(void * context, struct fib * fibptr)
                     (le32_to_cpu(dresp->mnt[0].vol) != CT_NONE) &&
                     (le32_to_cpu(dresp->mnt[0].state) != FSCS_HIDDEN)) {
                         fsa_dev_ptr->valid = 1;
+                        /* sense_key holds the current state of the spin-up */
+                        if (dresp->mnt[0].state & cpu_to_le32(FSCS_NOT_READY))
+                                fsa_dev_ptr->sense_data.sense_key = NOT_READY;
+                        else if (fsa_dev_ptr->sense_data.sense_key == NOT_READY)
+                                fsa_dev_ptr->sense_data.sense_key = NO_SENSE;
                         fsa_dev_ptr->type = le32_to_cpu(dresp->mnt[0].vol);
                         fsa_dev_ptr->size
                           = ((u64)le32_to_cpu(dresp->mnt[0].capacity)) +
@@ -1509,20 +1514,35 @@ static void io_callback(void *context, struct fib * fibptr)
         scsi_dma_unmap(scsicmd);
 
         readreply = (struct aac_read_reply *)fib_data(fibptr);
-        if (le32_to_cpu(readreply->status) == ST_OK)
-                scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
-        else {
+        switch (le32_to_cpu(readreply->status)) {
+        case ST_OK:
+                scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
+                        SAM_STAT_GOOD;
+                dev->fsa_dev[cid].sense_data.sense_key = NO_SENSE;
+                break;
+        case ST_NOT_READY:
+                scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
+                        SAM_STAT_CHECK_CONDITION;
+                set_sense(&dev->fsa_dev[cid].sense_data, NOT_READY,
+                  SENCODE_BECOMING_READY, ASENCODE_BECOMING_READY, 0, 0);
+                memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data,
+                       min_t(size_t, sizeof(dev->fsa_dev[cid].sense_data),
+                             SCSI_SENSE_BUFFERSIZE));
+                break;
+        default:
 #ifdef AAC_DETAILED_STATUS_INFO
                 printk(KERN_WARNING "io_callback: io failed, status = %d\n",
                   le32_to_cpu(readreply->status));
 #endif
-                scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION;
+                scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
+                        SAM_STAT_CHECK_CONDITION;
                 set_sense(&dev->fsa_dev[cid].sense_data,
                   HARDWARE_ERROR, SENCODE_INTERNAL_TARGET_FAILURE,
                   ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0);
                 memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data,
                        min_t(size_t, sizeof(dev->fsa_dev[cid].sense_data),
                              SCSI_SENSE_BUFFERSIZE));
+                break;
         }
         aac_fib_complete(fibptr);
         aac_fib_free(fibptr);
@@ -1863,6 +1883,84 @@ static int aac_synchronize(struct scsi_cmnd *scsicmd)
         return SCSI_MLQUEUE_HOST_BUSY;
 }
 
+static void aac_start_stop_callback(void *context, struct fib *fibptr)
+{
+        struct scsi_cmnd *scsicmd = context;
+
+        if (!aac_valid_context(scsicmd, fibptr))
+                return;
+
+        BUG_ON(fibptr == NULL);
+
+        scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
+
+        aac_fib_complete(fibptr);
+        aac_fib_free(fibptr);
+        scsicmd->scsi_done(scsicmd);
+}
+
+static int aac_start_stop(struct scsi_cmnd *scsicmd)
+{
+        int status;
+        struct fib *cmd_fibcontext;
+        struct aac_power_management *pmcmd;
+        struct scsi_device *sdev = scsicmd->device;
+        struct aac_dev *aac = (struct aac_dev *)sdev->host->hostdata;
+
+        if (!(aac->supplement_adapter_info.SupportedOptions2 &
+              AAC_OPTION_POWER_MANAGEMENT)) {
+                scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
+                                  SAM_STAT_GOOD;
+                scsicmd->scsi_done(scsicmd);
+                return 0;
+        }
+
+        if (aac->in_reset)
+                return SCSI_MLQUEUE_HOST_BUSY;
+
+        /*
+         *      Allocate and initialize a Fib
+         */
+        cmd_fibcontext = aac_fib_alloc(aac);
+        if (!cmd_fibcontext)
+                return SCSI_MLQUEUE_HOST_BUSY;
+
+        aac_fib_init(cmd_fibcontext);
+
+        pmcmd = fib_data(cmd_fibcontext);
+        pmcmd->command = cpu_to_le32(VM_ContainerConfig);
+        pmcmd->type = cpu_to_le32(CT_POWER_MANAGEMENT);
+        /* Eject bit ignored, not relevant */
+        pmcmd->sub = (scsicmd->cmnd[4] & 1) ?
+                cpu_to_le32(CT_PM_START_UNIT) : cpu_to_le32(CT_PM_STOP_UNIT);
+        pmcmd->cid = cpu_to_le32(sdev_id(sdev));
+        pmcmd->parm = (scsicmd->cmnd[1] & 1) ?
+                cpu_to_le32(CT_PM_UNIT_IMMEDIATE) : 0;
+
+        /*
+         *      Now send the Fib to the adapter
+         */
+        status = aac_fib_send(ContainerCommand,
+                  cmd_fibcontext,
+                  sizeof(struct aac_power_management),
+                  FsaNormal,
+                  0, 1,
+                  (fib_callback)aac_start_stop_callback,
+                  (void *)scsicmd);
+
+        /*
+         *      Check that the command queued to the controller
+         */
+        if (status == -EINPROGRESS) {
+                scsicmd->SCp.phase = AAC_OWNER_FIRMWARE;
+                return 0;
+        }
+
+        aac_fib_complete(cmd_fibcontext);
+        aac_fib_free(cmd_fibcontext);
+        return SCSI_MLQUEUE_HOST_BUSY;
+}
+
 /**
  *      aac_scsi_cmd()          -       Process SCSI command
  *      @scsicmd:               SCSI command block
@@ -1899,7 +1997,9 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd)
                          *      If the target container doesn't exist, it may have
                          *      been newly created
                          */
-                        if ((fsa_dev_ptr[cid].valid & 1) == 0) {
+                        if (((fsa_dev_ptr[cid].valid & 1) == 0) ||
+                          (fsa_dev_ptr[cid].sense_data.sense_key ==
+                           NOT_READY)) {
                                 switch (scsicmd->cmnd[0]) {
                                 case SERVICE_ACTION_IN:
                                         if (!(dev->raw_io_interface) ||
@@ -2091,8 +2191,8 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd)
                 scsi_sg_copy_from_buffer(scsicmd, cp, sizeof(cp));
                 /* Do not cache partition table for arrays */
                 scsicmd->device->removable = 1;
-
-                scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
+                scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
+                  SAM_STAT_GOOD;
                 scsicmd->scsi_done(scsicmd);
 
                 return 0;
@@ -2187,15 +2287,32 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd)
          *      These commands are all No-Ops
          */
         case TEST_UNIT_READY:
+                if (fsa_dev_ptr[cid].sense_data.sense_key == NOT_READY) {
+                        scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
+                                SAM_STAT_CHECK_CONDITION;
+                        set_sense(&dev->fsa_dev[cid].sense_data,
+                                  NOT_READY, SENCODE_BECOMING_READY,
+                                  ASENCODE_BECOMING_READY, 0, 0);
+                        memcpy(scsicmd->sense_buffer,
+                               &dev->fsa_dev[cid].sense_data,
+                               min_t(size_t,
+                                     sizeof(dev->fsa_dev[cid].sense_data),
+                                     SCSI_SENSE_BUFFERSIZE));
+                        scsicmd->scsi_done(scsicmd);
+                        return 0;
+                }
+                /* FALLTHRU */
         case RESERVE:
         case RELEASE:
         case REZERO_UNIT:
         case REASSIGN_BLOCKS:
         case SEEK_10:
-        case START_STOP:
                 scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
                 scsicmd->scsi_done(scsicmd);
                 return 0;
+
+        case START_STOP:
+                return aac_start_stop(scsicmd);
         }
 
         switch (scsicmd->cmnd[0])
diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
index 113ca9c8934c..73916adb8f80 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -12,7 +12,7 @@
  *----------------------------------------------------------------------------*/
 
 #ifndef AAC_DRIVER_BUILD
-# define AAC_DRIVER_BUILD 2455
+# define AAC_DRIVER_BUILD 2456
 # define AAC_DRIVER_BRANCH "-ms"
 #endif
 #define MAXIMUM_NUM_CONTAINERS  32
@@ -34,8 +34,8 @@
 #define CONTAINER_TO_ID(cont)           (cont)
 #define CONTAINER_TO_LUN(cont)          (0)
 
-#define aac_phys_to_logical(x)  (x+1)
-#define aac_logical_to_phys(x)  (x?x-1:0)
+#define aac_phys_to_logical(x)  ((x)+1)
+#define aac_logical_to_phys(x)  ((x)?(x)-1:0)
 
 /* #define AAC_DETAILED_STATUS_INFO */
 
@@ -424,6 +424,8 @@ struct aac_init
          */
         __le32  InitFlags;      /* flags for supported features */
 #define INITFLAGS_NEW_COMM_SUPPORTED    0x00000001
+#define INITFLAGS_DRIVER_USES_UTC_TIME  0x00000010
+#define INITFLAGS_DRIVER_SUPPORTS_PM    0x00000020
         __le32  MaxIoCommands;  /* max outstanding commands */
         __le32  MaxIoSize;      /* largest I/O command */
         __le32  MaxFibSize;     /* largest FIB to adapter */
@@ -867,8 +869,10 @@ struct aac_supplement_adapter_info
 };
 #define AAC_FEATURE_FALCON      cpu_to_le32(0x00000010)
 #define AAC_FEATURE_JBOD        cpu_to_le32(0x08000000)
-#define AAC_OPTION_MU_RESET     cpu_to_le32(0x00000001)
-#define AAC_OPTION_IGNORE_RESET cpu_to_le32(0x00000002)
+/* SupportedOptions2 */
+#define AAC_OPTION_MU_RESET             cpu_to_le32(0x00000001)
+#define AAC_OPTION_IGNORE_RESET         cpu_to_le32(0x00000002)
+#define AAC_OPTION_POWER_MANAGEMENT     cpu_to_le32(0x00000004)
 #define AAC_SIS_VERSION_V3      3
 #define AAC_SIS_SLOT_UNKNOWN    0xFF
 
@@ -1148,6 +1152,7 @@ struct aac_dev
 #define         ST_DQUOT        69
 #define         ST_STALE        70
 #define         ST_REMOTE       71
+#define         ST_NOT_READY    72
 #define         ST_BADHANDLE    10001
 #define         ST_NOT_SYNC     10002
 #define         ST_BAD_COOKIE   10003
@@ -1269,6 +1274,18 @@ struct aac_synchronize_reply {
         u8              data[16];
 };
 
+#define CT_POWER_MANAGEMENT     245
+#define CT_PM_START_UNIT        2
+#define CT_PM_STOP_UNIT         3
+#define CT_PM_UNIT_IMMEDIATE    1
+struct aac_power_management {
+        __le32          command;        /* VM_ContainerConfig */
+        __le32          type;           /* CT_POWER_MANAGEMENT */
+        __le32          sub;            /* CT_PM_* */
+        __le32          cid;
+        __le32          parm;           /* CT_PM_sub_* */
+};
+
 #define CT_PAUSE_IO    65
 #define CT_RELEASE_IO  66
 struct aac_pause {
@@ -1536,6 +1553,7 @@ struct aac_mntent {
 #define FSCS_NOTCLEAN   0x0001  /* fsck is necessary before mounting */
 #define FSCS_READONLY   0x0002  /* possible result of broken mirror */
 #define FSCS_HIDDEN     0x0004  /* should be ignored - set during a clear */
+#define FSCS_NOT_READY  0x0008  /* Array spinning up to fulfil request */
 
 struct aac_query_mount {
         __le32          command;
diff --git a/drivers/scsi/aacraid/comminit.c b/drivers/scsi/aacraid/comminit.c
index 294a802450be..cbac06355107 100644
--- a/drivers/scsi/aacraid/comminit.c
+++ b/drivers/scsi/aacraid/comminit.c
@@ -97,6 +97,8 @@ static int aac_alloc_comm(struct aac_dev *dev, void **commaddr, unsigned long co
                 init->InitFlags = cpu_to_le32(INITFLAGS_NEW_COMM_SUPPORTED);
                 dprintk((KERN_WARNING"aacraid: New Comm Interface enabled\n"));
         }
+        init->InitFlags |= cpu_to_le32(INITFLAGS_DRIVER_USES_UTC_TIME |
+                                       INITFLAGS_DRIVER_SUPPORTS_PM);
         init->MaxIoCommands = cpu_to_le32(dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB);
         init->MaxIoSize = cpu_to_le32(dev->scsi_host_ptr->max_sectors << 9);
         init->MaxFibSize = cpu_to_le32(dev->max_fib_size);
diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c
index ef67816a6fe5..289304aab690 100644
--- a/drivers/scsi/aacraid/commsup.c
+++ b/drivers/scsi/aacraid/commsup.c
@@ -515,7 +515,7 @@ int aac_fib_send(u16 command, struct fib *fibptr, unsigned long size,
                                 }
                                 udelay(5);
                         }
-                } else if (down_interruptible(&fibptr->event_wait) == 0) {
+                } else if (down_interruptible(&fibptr->event_wait)) {
                         fibptr->done = 2;
                         up(&fibptr->event_wait);
                 }
@@ -906,15 +906,22 @@ static void aac_handle_aif(struct aac_dev * dev, struct fib * fibptr)
                 case AifEnAddJBOD:
                 case AifEnDeleteJBOD:
                         container = le32_to_cpu(((__le32 *)aifcmd->data)[1]);
-                        if ((container >> 28))
+                        if ((container >> 28)) {
+                                container = (u32)-1;
                                 break;
+                        }
                         channel = (container >> 24) & 0xF;
-                        if (channel >= dev->maximum_num_channels)
+                        if (channel >= dev->maximum_num_channels) {
+                                container = (u32)-1;
                                 break;
+                        }
                         id = container & 0xFFFF;
-                        if (id >= dev->maximum_num_physicals)
+                        if (id >= dev->maximum_num_physicals) {
+                                container = (u32)-1;
                                 break;
+                        }
                         lun = (container >> 16) & 0xFF;
+                        container = (u32)-1;
                         channel = aac_phys_to_logical(channel);
                         device_config_needed =
                           (((__le32 *)aifcmd->data)[0] ==
@@ -933,13 +940,18 @@ static void aac_handle_aif(struct aac_dev * dev, struct fib * fibptr)
                         case EM_DRIVE_REMOVAL:
                                 container = le32_to_cpu(
                                         ((__le32 *)aifcmd->data)[2]);
-                                if ((container >> 28))
+                                if ((container >> 28)) {
+                                        container = (u32)-1;
                                         break;
+                                }
                                 channel = (container >> 24) & 0xF;
-                                if (channel >= dev->maximum_num_channels)
+                                if (channel >= dev->maximum_num_channels) {
+                                        container = (u32)-1;
                                         break;
+                                }
                                 id = container & 0xFFFF;
                                 lun = (container >> 16) & 0xFF;
+                                container = (u32)-1;
                                 if (id >= dev->maximum_num_physicals) {
                                         /* legacy dev_t ? */
                                         if ((0x2000 <= id) || lun || channel ||
@@ -1025,9 +1037,10 @@ static void aac_handle_aif(struct aac_dev * dev, struct fib * fibptr)
                 break;
         }
 
+        container = 0;
+retry_next:
         if (device_config_needed == NOTHING)
-        for (container = 0; container < dev->maximum_num_containers;
-            ++container) {
+        for (; container < dev->maximum_num_containers; ++container) {
                 if ((dev->fsa_dev[container].config_waiting_on == 0) &&
                         (dev->fsa_dev[container].config_needed != NOTHING) &&
                         time_before(jiffies, dev->fsa_dev[container].config_waiting_stamp + AIF_SNIFF_TIMEOUT)) {
@@ -1110,6 +1123,11 @@ static void aac_handle_aif(struct aac_dev * dev, struct fib * fibptr)
         }
         if (device_config_needed == ADD)
                 scsi_add_device(dev->scsi_host_ptr, channel, id, lun);
+        if (channel == CONTAINER_CHANNEL) {
+                container++;
+                device_config_needed = NOTHING;
+                goto retry_next;
+        }
 }
 
 static int _aac_reset_adapter(struct aac_dev *aac, int forced)
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index c109f63f8279..1f7c83607f84 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -401,6 +401,8 @@ static int aac_biosparm(struct scsi_device *sdev, struct block_device *bdev,
 static int aac_slave_configure(struct scsi_device *sdev)
 {
         struct aac_dev *aac = (struct aac_dev *)sdev->host->hostdata;
+        if (aac->jbod && (sdev->type == TYPE_DISK))
+                sdev->removable = 1;
         if ((sdev->type == TYPE_DISK) &&
                         (sdev_channel(sdev) != CONTAINER_CHANNEL) &&
                         (!aac->jbod || sdev->inq_periph_qual) &&
@@ -809,6 +811,12 @@ static ssize_t aac_show_flags(struct device *cdev,
                                 "SAI_READ_CAPACITY_16\n");
         if (dev->jbod)
                 len += snprintf(buf + len, PAGE_SIZE - len, "SUPPORTED_JBOD\n");
+        if (dev->supplement_adapter_info.SupportedOptions2 &
+                AAC_OPTION_POWER_MANAGEMENT)
+                len += snprintf(buf + len, PAGE_SIZE - len,
+                                "SUPPORTED_POWER_MANAGEMENT\n");
+        if (dev->msi)
+                len += snprintf(buf + len, PAGE_SIZE - len, "PCI_HAS_MSI\n");
         return len;
 }
 
@@ -1106,7 +1114,7 @@ static int __devinit aac_probe_one(struct pci_dev *pdev,
         aac->pdev = pdev;
         aac->name = aac_driver_template.name;
         aac->id = shost->unique_id;
-        aac->cardtype =  index;
+        aac->cardtype = index;
         INIT_LIST_HEAD(&aac->entry);
 
         aac->fibs = kmalloc(sizeof(struct fib) * (shost->can_queue + AAC_NUM_MGT_FIB), GFP_KERNEL);
@@ -1146,19 +1154,19 @@ static int __devinit aac_probe_one(struct pci_dev *pdev,
                 goto out_deinit;
 
         /*
-         * Lets override negotiations and drop the maximum SG limit to 34
-         */
+         * Lets override negotiations and drop the maximum SG limit to 34
+         */
         if ((aac_drivers[index].quirks & AAC_QUIRK_34SG) &&
                         (shost->sg_tablesize > 34)) {
                 shost->sg_tablesize = 34;
                 shost->max_sectors = (shost->sg_tablesize * 8) + 112;
-        }
+        }
 
-        if ((aac_drivers[index].quirks & AAC_QUIRK_17SG) &&
+        if ((aac_drivers[index].quirks & AAC_QUIRK_17SG) &&
                         (shost->sg_tablesize > 17)) {
                 shost->sg_tablesize = 17;
                 shost->max_sectors = (shost->sg_tablesize * 8) + 112;
-        }
+        }
 
         error = pci_set_dma_max_seg_size(pdev,
                 (aac->adapter_info.options & AAC_OPT_NEW_COMM) ?
@@ -1174,7 +1182,7 @@ static int __devinit aac_probe_one(struct pci_dev *pdev,
         else
                 aac->printf_enabled = 0;
 
-        /*
+        /*
          * max channel will be the physical channels plus 1 virtual channel
          * all containers are on the virtual channel 0 (CONTAINER_CHANNEL)
          * physical channels are address by their actual physical number+1
diff --git a/drivers/scsi/aic94xx/aic94xx_init.c b/drivers/scsi/aic94xx/aic94xx_init.c
index 90f5e0a6f2e3..2a730c470f62 100644
--- a/drivers/scsi/aic94xx/aic94xx_init.c
+++ b/drivers/scsi/aic94xx/aic94xx_init.c
@@ -529,10 +529,10 @@ static void asd_remove_dev_attrs(struct asd_ha_struct *asd_ha)
 /* The first entry, 0, is used for dynamic ids, the rest for devices
  * we know about.
  */
-static struct asd_pcidev_struct {
+static const struct asd_pcidev_struct {
         const char * name;
         int (*setup)(struct asd_ha_struct *asd_ha);
-} asd_pcidev_data[] = {
+} asd_pcidev_data[] __devinitconst = {
         /* Id 0 is used for dynamic ids. */
         { .name  = "Adaptec AIC-94xx SAS/SATA Host Adapter",
           .setup = asd_aic9410_setup
@@ -735,7 +735,7 @@ static int asd_unregister_sas_ha(struct asd_ha_struct *asd_ha)
 static int __devinit asd_pci_probe(struct pci_dev *dev,
                                    const struct pci_device_id *id)
 {
-        struct asd_pcidev_struct *asd_dev;
+        const struct asd_pcidev_struct *asd_dev;
         unsigned asd_id = (unsigned) id->driver_data;
         struct asd_ha_struct *asd_ha;
         struct Scsi_Host *shost;
diff --git a/drivers/scsi/constants.c b/drivers/scsi/constants.c
index 403a7f2d8f9b..9785d7384199 100644
--- a/drivers/scsi/constants.c
+++ b/drivers/scsi/constants.c
@@ -28,7 +28,6 @@
 #define SERVICE_ACTION_OUT_12 0xa9
 #define SERVICE_ACTION_IN_16 0x9e
 #define SERVICE_ACTION_OUT_16 0x9f
-#define VARIABLE_LENGTH_CMD 0x7f
 
 
 
@@ -210,7 +209,7 @@ static void print_opcode_name(unsigned char * cdbp, int cdb_len)
         cdb0 = cdbp[0];
         switch(cdb0) {
         case VARIABLE_LENGTH_CMD:
-                len = cdbp[7] + 8;
+                len = scsi_varlen_cdb_length(cdbp);
                 if (len < 10) {
                         printk("short variable length command, "
                                "len=%d ext_len=%d", len, cdb_len);
@@ -300,7 +299,7 @@ static void print_opcode_name(unsigned char * cdbp, int cdb_len)
         cdb0 = cdbp[0];
         switch(cdb0) {
         case VARIABLE_LENGTH_CMD:
-                len = cdbp[7] + 8;
+                len = scsi_varlen_cdb_length(cdbp);
                 if (len < 10) {
                         printk("short opcode=0x%x command, len=%d "
                                "ext_len=%d", cdb0, len, cdb_len);
@@ -335,10 +334,7 @@ void __scsi_print_command(unsigned char *cdb)
         int k, len;
 
         print_opcode_name(cdb, 0);
-        if (VARIABLE_LENGTH_CMD == cdb[0])
-                len = cdb[7] + 8;
-        else
-                len = COMMAND_SIZE(cdb[0]);
+        len = scsi_command_size(cdb);
         /* print out all bytes in cdb */
         for (k = 0; k < len; ++k) 
                 printk(" %02x", cdb[k]);
diff --git a/drivers/scsi/dpt/dpti_ioctl.h b/drivers/scsi/dpt/dpti_ioctl.h
index cc784e8f6e9d..f60236721e0d 100644
--- a/drivers/scsi/dpt/dpti_ioctl.h
+++ b/drivers/scsi/dpt/dpti_ioctl.h
@@ -89,7 +89,7 @@ typedef struct {
         int      njobs;            /* # of jobs sent to HA            */
         int      qdepth;           /* Controller queue depth.         */
         int      wakebase;         /* mpx wakeup base index.          */
-        uLONG    SGsize;           /* Scatter/Gather list size.       */
+        uINT     SGsize;           /* Scatter/Gather list size.       */
         unsigned heads;            /* heads for drives on cntlr.      */
         unsigned sectors;          /* sectors for drives on cntlr.    */
         uCHAR    do_drive32;       /* Flag for Above 16 MB Ability    */
@@ -97,8 +97,8 @@ typedef struct {
         char     idPAL[4];         /* 4 Bytes Of The ID Pal           */
         uCHAR    primary;          /* 1 For Primary, 0 For Secondary  */
         uCHAR    eataVersion;      /* EATA Version                    */
-        uLONG    cpLength;         /* EATA Command Packet Length      */
-        uLONG    spLength;         /* EATA Status Packet Length       */
+        uINT     cpLength;         /* EATA Command Packet Length      */
+        uINT     spLength;         /* EATA Status Packet Length       */
         uCHAR    drqNum;           /* DRQ Index (0,5,6,7)             */
         uCHAR    flag1;            /* EATA Flags 1 (Byte 9)           */
         uCHAR    flag2;            /* EATA Flags 2 (Byte 30)          */
@@ -107,23 +107,23 @@ typedef struct {
 typedef struct {
         uSHORT length;          // Remaining length of this
         uSHORT drvrHBAnum;      // Relative HBA # used by the driver
-        uLONG baseAddr;         // Base I/O address
+        uINT baseAddr;          // Base I/O address
         uSHORT blinkState;      // Blink LED state (0=Not in blink LED)
         uCHAR pciBusNum;        // PCI Bus # (Optional)
         uCHAR pciDeviceNum;     // PCI Device # (Optional)
         uSHORT hbaFlags;        // Miscellaneous HBA flags
         uSHORT Interrupt;       // Interrupt set for this device.
 #   if (defined(_DPT_ARC))
-        uLONG baseLength;
+        uINT baseLength;
         ADAPTER_OBJECT *AdapterObject;
         LARGE_INTEGER DmaLogicalAddress;
         PVOID DmaVirtualAddress;
         LARGE_INTEGER ReplyLogicalAddress;
         PVOID ReplyVirtualAddress;
 #   else
-        uLONG reserved1;        // Reserved for future expansion
-        uLONG reserved2;        // Reserved for future expansion
-        uLONG reserved3;        // Reserved for future expansion
+        uINT reserved1;         // Reserved for future expansion
+        uINT reserved2;         // Reserved for future expansion
+        uINT reserved3;         // Reserved for future expansion
 #   endif
 } drvrHBAinfo_S;
 
diff --git a/drivers/scsi/dpt/dptsig.h b/drivers/scsi/dpt/dptsig.h
index 94bc894d1200..72c8992fdf21 100644
--- a/drivers/scsi/dpt/dptsig.h
+++ b/drivers/scsi/dpt/dptsig.h
@@ -33,11 +33,7 @@
 /* to make sure we are talking the same size under all OS's     */
 typedef unsigned char sigBYTE;
 typedef unsigned short sigWORD;
-#if (defined(_MULTI_DATAMODEL) && defined(sun) && !defined(_ILP32))
-typedef uint32_t sigLONG;
-#else
-typedef unsigned long sigLONG;
-#endif
+typedef unsigned int sigINT;
 
 /*
  * use sigWORDLittleEndian for:
@@ -300,7 +296,7 @@ typedef struct dpt_sig {
     sigBYTE dsFiletype;          /* type of file */
     sigBYTE dsFiletypeFlags;     /* flags to specify load type, etc. */
     sigBYTE dsOEM;               /* OEM file was created for */
-    sigLONG dsOS;                /* which Operating systems */
+    sigINT  dsOS;                /* which Operating systems */
     sigWORD dsCapabilities;      /* RAID levels, etc. */
     sigWORD dsDeviceSupp;        /* Types of SCSI devices supported */
     sigWORD dsAdapterSupp;       /* DPT adapter families supported */
diff --git a/drivers/scsi/dpt/sys_info.h b/drivers/scsi/dpt/sys_info.h
index d23b70c8c768..a90c4cb8ea8b 100644
--- a/drivers/scsi/dpt/sys_info.h
+++ b/drivers/scsi/dpt/sys_info.h
@@ -145,8 +145,8 @@
    uCHAR        smartROMRevision;
    uSHORT       flags;                  /* See bit definitions above */
    uSHORT       conventionalMemSize;    /* in KB */
-   uLONG        extendedMemSize;        /* in KB */
-   uLONG        osType;                 /* Same as DPTSIG's definition */
+   uINT         extendedMemSize;        /* in KB */
+   uINT         osType;                 /* Same as DPTSIG's definition */
    uCHAR        osMajorVersion;
    uCHAR        osMinorVersion;         /* The OS version */
    uCHAR        osRevision;
diff --git a/drivers/scsi/dpt_i2o.c b/drivers/scsi/dpt_i2o.c
index ac92ac143b46..0fb5bf4c43ac 100644
--- a/drivers/scsi/dpt_i2o.c
+++ b/drivers/scsi/dpt_i2o.c
@@ -29,11 +29,6 @@
 /*#define DEBUG 1 */
 /*#define UARTDELAY 1 */
 
-/* On the real kernel ADDR32 should always be zero for 2.4. GFP_HIGH allocates
-   high pages. Keep the macro around because of the broken unmerged ia64 tree */
-
-#define ADDR32 (0)
-
 #include <linux/module.h>
 
 MODULE_AUTHOR("Deanna Bonds, with _lots_ of help from Mark Salyzyn");
@@ -108,27 +103,28 @@ static dpt_sig_S DPTI_sig = {
 
 static DEFINE_MUTEX(adpt_configuration_lock);
 
-static struct i2o_sys_tbl *sys_tbl = NULL;
-static int sys_tbl_ind = 0;
-static int sys_tbl_len = 0;
+static struct i2o_sys_tbl *sys_tbl;
+static dma_addr_t sys_tbl_pa;
+static int sys_tbl_ind;
+static int sys_tbl_len;
 
 static adpt_hba* hba_chain = NULL;
 static int hba_count = 0;
 
+static struct class *adpt_sysfs_class;
+
+#ifdef CONFIG_COMPAT
+static long compat_adpt_ioctl(struct file *, unsigned int, unsigned long);
+#endif
+
 static const struct file_operations adpt_fops = {
         .ioctl          = adpt_ioctl,
         .open           = adpt_open,
-        .release        = adpt_close
-};
-
-#ifdef REBOOT_NOTIFIER
-static struct notifier_block adpt_reboot_notifier =
-{
-         adpt_reboot_event,
-         NULL,
-         0
-};
+        .release        = adpt_close,
+#ifdef CONFIG_COMPAT
+        .compat_ioctl   = compat_adpt_ioctl,
 #endif
+};
 
 /* Structures and definitions for synchronous message posting.
  * See adpt_i2o_post_wait() for description
@@ -151,6 +147,21 @@ static DEFINE_SPINLOCK(adpt_post_wait_lock);
  *============================================================================
  */
 
+static inline int dpt_dma64(adpt_hba *pHba)
+{
+        return (sizeof(dma_addr_t) > 4 && (pHba)->dma64);
+}
+
+static inline u32 dma_high(dma_addr_t addr)
+{
+        return upper_32_bits(addr);
+}
+
+static inline u32 dma_low(dma_addr_t addr)
+{
+        return (u32)addr;
+}
+
 static u8 adpt_read_blink_led(adpt_hba* host)
 {
         if (host->FwDebugBLEDflag_P) {
@@ -178,8 +189,6 @@ static int adpt_detect(struct scsi_host_template* sht)
         struct pci_dev *pDev = NULL;
         adpt_hba* pHba;
 
-        adpt_init();
-
         PINFO("Detecting Adaptec I2O RAID controllers...\n");
 
         /* search for all Adatpec I2O RAID cards */
@@ -247,13 +256,29 @@ rebuild_sys_tab:
                 adpt_inquiry(pHba);
         }
 
+        adpt_sysfs_class = class_create(THIS_MODULE, "dpt_i2o");
+        if (IS_ERR(adpt_sysfs_class)) {
+                printk(KERN_WARNING"dpti: unable to create dpt_i2o class\n");
+                adpt_sysfs_class = NULL;
+        }
+
         for (pHba = hba_chain; pHba; pHba = pHba->next) {
-                if( adpt_scsi_register(pHba,sht) < 0){
+                if (adpt_scsi_host_alloc(pHba, sht) < 0){
                         adpt_i2o_delete_hba(pHba);
                         continue;
                 }
                 pHba->initialized = TRUE;
                 pHba->state &= ~DPTI_STATE_RESET;
+                if (adpt_sysfs_class) {
+                        struct device *dev = device_create(adpt_sysfs_class,
+                                NULL, MKDEV(DPTI_I2O_MAJOR, pHba->unit),
+                                "dpti%d", pHba->unit);
+                        if (IS_ERR(dev)) {
+                                printk(KERN_WARNING"dpti%d: unable to "
+                                        "create device in dpt_i2o class\n",
+                                        pHba->unit);
+                        }
+                }
         }
 
         // Register our control device node
@@ -282,7 +307,7 @@ static int adpt_release(struct Scsi_Host *host)
 
 static void adpt_inquiry(adpt_hba* pHba)
 {
-        u32 msg[14]; 
+        u32 msg[17]; 
         u32 *mptr;
         u32 *lenptr;
         int direction;
@@ -290,11 +315,12 @@ static void adpt_inquiry(adpt_hba* pHba)
         u32 len;
         u32 reqlen;
         u8* buf;
+        dma_addr_t addr;
         u8  scb[16];
         s32 rcode;
 
         memset(msg, 0, sizeof(msg));
-        buf = kmalloc(80,GFP_KERNEL|ADDR32);
+        buf = dma_alloc_coherent(&pHba->pDev->dev, 80, &addr, GFP_KERNEL);
         if(!buf){
                 printk(KERN_ERR"%s: Could not allocate buffer\n",pHba->name);
                 return;
@@ -305,7 +331,10 @@ static void adpt_inquiry(adpt_hba* pHba)
         direction = 0x00000000; 
         scsidir  =0x40000000;   // DATA IN  (iop<--dev)
 
-        reqlen = 14;            // SINGLE SGE
+        if (dpt_dma64(pHba))
+                reqlen = 17;            // SINGLE SGE, 64 bit
+        else
+                reqlen = 14;            // SINGLE SGE, 32 bit
         /* Stick the headers on */
         msg[0] = reqlen<<16 | SGL_OFFSET_12;
         msg[1] = (0xff<<24|HOST_TID<<12|ADAPTER_TID);
@@ -338,8 +367,16 @@ static void adpt_inquiry(adpt_hba* pHba)
 
         /* Now fill in the SGList and command */
         *lenptr = len;
-        *mptr++ = 0xD0000000|direction|len;
-        *mptr++ = virt_to_bus(buf);
+        if (dpt_dma64(pHba)) {
+                *mptr++ = (0x7C<<24)+(2<<16)+0x02; /* Enable 64 bit */
+                *mptr++ = 1 << PAGE_SHIFT;
+                *mptr++ = 0xD0000000|direction|len;
+                *mptr++ = dma_low(addr);
+                *mptr++ = dma_high(addr);
+        } else {
+                *mptr++ = 0xD0000000|direction|len;
+                *mptr++ = addr;
+        }
 
         // Send it on it's way
         rcode = adpt_i2o_post_wait(pHba, msg, reqlen<<2, 120);
@@ -347,7 +384,7 @@ static void adpt_inquiry(adpt_hba* pHba)
                 sprintf(pHba->detail, "Adaptec I2O RAID");
                 printk(KERN_INFO "%s: Inquiry Error (%d)\n",pHba->name,rcode);
                 if (rcode != -ETIME && rcode != -EINTR)
-                        kfree(buf);
+                        dma_free_coherent(&pHba->pDev->dev, 80, buf, addr);
         } else {
                 memset(pHba->detail, 0, sizeof(pHba->detail));
                 memcpy(&(pHba->detail), "Vendor: Adaptec ", 16);
@@ -356,7 +393,7 @@ static void adpt_inquiry(adpt_hba* pHba)
                 memcpy(&(pHba->detail[40]), " FW: ", 4);
                 memcpy(&(pHba->detail[44]), (u8*) &buf[32], 4);
                 pHba->detail[48] = '\0';        /* precautionary */
-                kfree(buf);
+                dma_free_coherent(&pHba->pDev->dev, 80, buf, addr);
         }
         adpt_i2o_status_get(pHba);
         return ;
@@ -632,6 +669,91 @@ stop_output:
         return len;
 }
 
+/*
+ *      Turn a struct scsi_cmnd * into a unique 32 bit 'context'.
+ */
+static u32 adpt_cmd_to_context(struct scsi_cmnd *cmd)
+{
+        return (u32)cmd->serial_number;
+}
+
+/*
+ *      Go from a u32 'context' to a struct scsi_cmnd * .
+ *      This could probably be made more efficient.
+ */
+static struct scsi_cmnd *
+        adpt_cmd_from_context(adpt_hba * pHba, u32 context)
+{
+        struct scsi_cmnd * cmd;
+        struct scsi_device * d;
+
+        if (context == 0)
+                return NULL;
+
+        spin_unlock(pHba->host->host_lock);
+        shost_for_each_device(d, pHba->host) {
+                unsigned long flags;
+                spin_lock_irqsave(&d->list_lock, flags);
+                list_for_each_entry(cmd, &d->cmd_list, list) {
+                        if (((u32)cmd->serial_number == context)) {
+                                spin_unlock_irqrestore(&d->list_lock, flags);
+                                scsi_device_put(d);
+                                spin_lock(pHba->host->host_lock);
+                                return cmd;
+                        }
+                }
+                spin_unlock_irqrestore(&d->list_lock, flags);
+        }
+        spin_lock(pHba->host->host_lock);
+
+        return NULL;
+}
+
+/*
+ *      Turn a pointer to ioctl reply data into an u32 'context'
+ */
+static u32 adpt_ioctl_to_context(adpt_hba * pHba, void *reply)
+{
+#if BITS_PER_LONG == 32
+        return (u32)(unsigned long)reply;
+#else
+        ulong flags = 0;
+        u32 nr, i;
+
+        spin_lock_irqsave(pHba->host->host_lock, flags);
+        nr = ARRAY_SIZE(pHba->ioctl_reply_context);
+        for (i = 0; i < nr; i++) {
+                if (pHba->ioctl_reply_context[i] == NULL) {
+                        pHba->ioctl_reply_context[i] = reply;
+                        break;
+                }
+        }
+        spin_unlock_irqrestore(pHba->host->host_lock, flags);
+        if (i >= nr) {
+                kfree (reply);
+                printk(KERN_WARNING"%s: Too many outstanding "
+                                "ioctl commands\n", pHba->name);
+                return (u32)-1;
+        }
+
+        return i;
+#endif
+}
+
+/*
+ *      Go from an u32 'context' to a pointer to ioctl reply data.
+ */
+static void *adpt_ioctl_from_context(adpt_hba *pHba, u32 context)
+{
+#if BITS_PER_LONG == 32
+        return (void *)(unsigned long)context;
+#else
+        void *p = pHba->ioctl_reply_context[context];
+        pHba->ioctl_reply_context[context] = NULL;
+
+        return p;
+#endif
+}
 
 /*===========================================================================
  * Error Handling routines
@@ -660,7 +782,7 @@ static int adpt_abort(struct scsi_cmnd * cmd)
         msg[1] = I2O_CMD_SCSI_ABORT<<24|HOST_TID<<12|dptdevice->tid;
         msg[2] = 0;
         msg[3]= 0; 
-        msg[4] = (u32)cmd;
+        msg[4] = adpt_cmd_to_context(cmd);
         if (pHba->host)
                 spin_lock_irq(pHba->host->host_lock);
         rcode = adpt_i2o_post_wait(pHba, msg, sizeof(msg), FOREVER);
@@ -861,27 +983,6 @@ static void adpt_i2o_sys_shutdown(void)
          printk(KERN_INFO "Adaptec I2O controllers down.\n");
 }
 
-/*
- * reboot/shutdown notification.
- *
- * - Quiesce each IOP in the system
- *
- */
-
-#ifdef REBOOT_NOTIFIER
-static int adpt_reboot_event(struct notifier_block *n, ulong code, void *p)
-{
-
-         if(code != SYS_RESTART && code != SYS_HALT && code != SYS_POWER_OFF)
-                  return NOTIFY_DONE;
-
-         adpt_i2o_sys_shutdown();
-
-         return NOTIFY_DONE;
-}
-#endif
-
-
 static int adpt_install_hba(struct scsi_host_template* sht, struct pci_dev* pDev)
 {
 
@@ -893,6 +994,7 @@ static int adpt_install_hba(struct scsi_host_template* sht, struct pci_dev* pDev
         u32 hba_map1_area_size = 0;
         void __iomem *base_addr_virt = NULL;
         void __iomem *msg_addr_virt = NULL;
+        int dma64 = 0;
 
         int raptorFlag = FALSE;
 
@@ -906,9 +1008,21 @@ static int adpt_install_hba(struct scsi_host_template* sht, struct pci_dev* pDev
         }
 
         pci_set_master(pDev);
-        if (pci_set_dma_mask(pDev, DMA_32BIT_MASK))
+
+        /*
+         *      See if we should enable dma64 mode.
+         */
+        if (sizeof(dma_addr_t) > 4 &&
+            pci_set_dma_mask(pDev, DMA_64BIT_MASK) == 0) {
+                if (dma_get_required_mask(&pDev->dev) > DMA_32BIT_MASK)
+                        dma64 = 1;
+        }
+        if (!dma64 && pci_set_dma_mask(pDev, DMA_32BIT_MASK) != 0)
                 return -EINVAL;
 
+        /* adapter only supports message blocks below 4GB */
+        pci_set_consistent_dma_mask(pDev, DMA_32BIT_MASK);
+
         base_addr0_phys = pci_resource_start(pDev,0);
         hba_map0_area_size = pci_resource_len(pDev,0);
 
@@ -929,6 +1043,25 @@ static int adpt_install_hba(struct scsi_host_template* sht, struct pci_dev* pDev
                 raptorFlag = TRUE;
         }
 
+#if BITS_PER_LONG == 64
+        /*
+         *      The original Adaptec 64 bit driver has this comment here:
+         *      "x86_64 machines need more optimal mappings"
+         *
+         *      I assume some HBAs report ridiculously large mappings
+         *      and we need to limit them on platforms with IOMMUs.
+         */
+        if (raptorFlag == TRUE) {
+                if (hba_map0_area_size > 128)
+                        hba_map0_area_size = 128;
+                if (hba_map1_area_size > 524288)
+                        hba_map1_area_size = 524288;
+        } else {
+                if (hba_map0_area_size > 524288)
+                        hba_map0_area_size = 524288;
+        }
+#endif
+
         base_addr_virt = ioremap(base_addr0_phys,hba_map0_area_size);
         if (!base_addr_virt) {
                 pci_release_regions(pDev);
@@ -991,16 +1124,22 @@ static int adpt_install_hba(struct scsi_host_template* sht, struct pci_dev* pDev
         pHba->state = DPTI_STATE_RESET;
         pHba->pDev = pDev;
         pHba->devices = NULL;
+        pHba->dma64 = dma64;
 
         // Initializing the spinlocks
         spin_lock_init(&pHba->state_lock);
         spin_lock_init(&adpt_post_wait_lock);
 
         if(raptorFlag == 0){
-                printk(KERN_INFO"Adaptec I2O RAID controller %d at %p size=%x irq=%d\n", 
-                        hba_count-1, base_addr_virt, hba_map0_area_size, pDev->irq);
+                printk(KERN_INFO "Adaptec I2O RAID controller"
+                                 " %d at %p size=%x irq=%d%s\n", 
+                        hba_count-1, base_addr_virt,
+                        hba_map0_area_size, pDev->irq,
+                        dma64 ? " (64-bit DMA)" : "");
         } else {
-                printk(KERN_INFO"Adaptec I2O RAID controller %d irq=%d\n",hba_count-1, pDev->irq);
+                printk(KERN_INFO"Adaptec I2O RAID controller %d irq=%d%s\n",
+                        hba_count-1, pDev->irq,
+                        dma64 ? " (64-bit DMA)" : "");
                 printk(KERN_INFO"     BAR0 %p - size= %x\n",base_addr_virt,hba_map0_area_size);
                 printk(KERN_INFO"     BAR1 %p - size= %x\n",msg_addr_virt,hba_map1_area_size);
         }
@@ -1053,10 +1192,26 @@ static void adpt_i2o_delete_hba(adpt_hba* pHba)
         if(pHba->msg_addr_virt != pHba->base_addr_virt){
                 iounmap(pHba->msg_addr_virt);
         }
-        kfree(pHba->hrt);
-        kfree(pHba->lct);
-        kfree(pHba->status_block);
-        kfree(pHba->reply_pool);
+        if(pHba->FwDebugBuffer_P)
+                iounmap(pHba->FwDebugBuffer_P);
+        if(pHba->hrt) {
+                dma_free_coherent(&pHba->pDev->dev,
+                        pHba->hrt->num_entries * pHba->hrt->entry_len << 2,
+                        pHba->hrt, pHba->hrt_pa);
+        }
+        if(pHba->lct) {
+                dma_free_coherent(&pHba->pDev->dev, pHba->lct_size,
+                        pHba->lct, pHba->lct_pa);
+        }
+        if(pHba->status_block) {
+                dma_free_coherent(&pHba->pDev->dev, sizeof(i2o_status_block),
+                        pHba->status_block, pHba->status_block_pa);
+        }
+        if(pHba->reply_pool) {
+                dma_free_coherent(&pHba->pDev->dev,
+                        pHba->reply_fifo_size * REPLY_FRAME_SIZE * 4,
+                        pHba->reply_pool, pHba->reply_pool_pa);
+        }
 
         for(d = pHba->devices; d ; d = next){
                 next = d->next;
@@ -1075,23 +1230,19 @@ static void adpt_i2o_delete_hba(adpt_hba* pHba)
         pci_dev_put(pHba->pDev);
         kfree(pHba);
 
+        if (adpt_sysfs_class)
+                device_destroy(adpt_sysfs_class,
+                                MKDEV(DPTI_I2O_MAJOR, pHba->unit));
+
         if(hba_count <= 0){
                 unregister_chrdev(DPTI_I2O_MAJOR, DPT_DRIVER);   
+                if (adpt_sysfs_class) {
+                        class_destroy(adpt_sysfs_class);
+                        adpt_sysfs_class = NULL;
+                }
         }
 }
 
-
-static int adpt_init(void)
-{
-        printk("Loading Adaptec I2O RAID: Version " DPT_I2O_VERSION "\n");
-#ifdef REBOOT_NOTIFIER
-        register_reboot_notifier(&adpt_reboot_notifier);
-#endif
-
-        return 0;
-}
-
-
 static struct adpt_device* adpt_find_device(adpt_hba* pHba, u32 chan, u32 id, u32 lun)
 {
         struct adpt_device* d;
@@ -1283,6 +1434,7 @@ static s32 adpt_i2o_reset_hba(adpt_hba* pHba)
 {
         u32 msg[8];
         u8* status;
+        dma_addr_t addr;
         u32 m = EMPTY_QUEUE ;
         ulong timeout = jiffies + (TMOUT_IOPRESET*HZ);
 
@@ -1305,12 +1457,13 @@ static s32 adpt_i2o_reset_hba(adpt_hba* pHba)
                 schedule_timeout_uninterruptible(1);
         } while (m == EMPTY_QUEUE);
 
-        status = kzalloc(4, GFP_KERNEL|ADDR32);
+        status = dma_alloc_coherent(&pHba->pDev->dev, 4, &addr, GFP_KERNEL);
         if(status == NULL) {
                 adpt_send_nop(pHba, m);
                 printk(KERN_ERR"IOP reset failed - no free memory.\n");
                 return -ENOMEM;
         }
+        memset(status,0,4);
 
         msg[0]=EIGHT_WORD_MSG_SIZE|SGL_OFFSET_0;
         msg[1]=I2O_CMD_ADAPTER_RESET<<24|HOST_TID<<12|ADAPTER_TID;
@@ -1318,8 +1471,8 @@ static s32 adpt_i2o_reset_hba(adpt_hba* pHba)
         msg[3]=0;
         msg[4]=0;
         msg[5]=0;
-        msg[6]=virt_to_bus(status);
-        msg[7]=0;     
+        msg[6]=dma_low(addr);
+        msg[7]=dma_high(addr);
 
         memcpy_toio(pHba->msg_addr_virt+m, msg, sizeof(msg));
         wmb();
@@ -1329,7 +1482,10 @@ static s32 adpt_i2o_reset_hba(adpt_hba* pHba)
         while(*status == 0){
                 if(time_after(jiffies,timeout)){
                         printk(KERN_WARNING"%s: IOP Reset Timeout\n",pHba->name);
-                        kfree(status);
+                        /* We lose 4 bytes of "status" here, but we cannot
+                           free these because controller may awake and corrupt
+                           those bytes at any time */
+                        /* dma_free_coherent(&pHba->pDev->dev, 4, buf, addr); */
                         return -ETIMEDOUT;
                 }
                 rmb();
@@ -1348,6 +1504,10 @@ static s32 adpt_i2o_reset_hba(adpt_hba* pHba)
                         }
                         if(time_after(jiffies,timeout)){
                                 printk(KERN_ERR "%s:Timeout waiting for IOP Reset.\n",pHba->name);
+                                /* We lose 4 bytes of "status" here, but we
+                                   cannot free these because controller may
+                                   awake and corrupt those bytes at any time */
+                                /* dma_free_coherent(&pHba->pDev->dev, 4, buf, addr); */
                                 return -ETIMEDOUT;
                         }
                         schedule_timeout_uninterruptible(1);
@@ -1364,7 +1524,7 @@ static s32 adpt_i2o_reset_hba(adpt_hba* pHba)
                 PDEBUG("%s: Reset completed.\n", pHba->name);
         }
 
-        kfree(status);
+        dma_free_coherent(&pHba->pDev->dev, 4, status, addr);
 #ifdef UARTDELAY
         // This delay is to allow someone attached to the card through the debug UART to 
         // set up the dump levels that they want before the rest of the initialization sequence
@@ -1636,6 +1796,7 @@ static int adpt_i2o_passthru(adpt_hba* pHba, u32 __user *arg)
         u32 i = 0;
         u32 rcode = 0;
         void *p = NULL;
+        dma_addr_t addr;
         ulong flags = 0;
 
         memset(&msg, 0, MAX_MESSAGE_SIZE*4);
@@ -1668,10 +1829,13 @@ static int adpt_i2o_passthru(adpt_hba* pHba, u32 __user *arg)
         }
         sg_offset = (msg[0]>>4)&0xf;
         msg[2] = 0x40000000; // IOCTL context
-        msg[3] = (u32)reply;
+        msg[3] = adpt_ioctl_to_context(pHba, reply);
+        if (msg[3] == (u32)-1)
+                return -EBUSY;
+
         memset(sg_list,0, sizeof(sg_list[0])*pHba->sg_tablesize);
         if(sg_offset) {
-                // TODO 64bit fix
+                // TODO add 64 bit API
                 struct sg_simple_element *sg =  (struct sg_simple_element*) (msg+sg_offset);
                 sg_count = (size - sg_offset*4) / sizeof(struct sg_simple_element);
                 if (sg_count > pHba->sg_tablesize){
@@ -1690,7 +1854,7 @@ static int adpt_i2o_passthru(adpt_hba* pHba, u32 __user *arg)
                         }
                         sg_size = sg[i].flag_count & 0xffffff;      
                         /* Allocate memory for the transfer */
-                        p = kmalloc(sg_size, GFP_KERNEL|ADDR32);
+                        p = dma_alloc_coherent(&pHba->pDev->dev, sg_size, &addr, GFP_KERNEL);
                         if(!p) {
                                 printk(KERN_DEBUG"%s: Could not allocate SG buffer - size = %d buffer number %d of %d\n",
                                                 pHba->name,sg_size,i,sg_count);
@@ -1700,15 +1864,15 @@ static int adpt_i2o_passthru(adpt_hba* pHba, u32 __user *arg)
                         sg_list[sg_index++] = p; // sglist indexed with input frame, not our internal frame.
                         /* Copy in the user's SG buffer if necessary */
                         if(sg[i].flag_count & 0x04000000 /*I2O_SGL_FLAGS_DIR*/) {
-                                // TODO 64bit fix
-                                if (copy_from_user(p,(void __user *)sg[i].addr_bus, sg_size)) {
+                                // sg_simple_element API is 32 bit
+                                if (copy_from_user(p,(void __user *)(ulong)sg[i].addr_bus, sg_size)) {
                                         printk(KERN_DEBUG"%s: Could not copy SG buf %d FROM user\n",pHba->name,i);
                                         rcode = -EFAULT;
                                         goto cleanup;
                                 }
                         }
-                        //TODO 64bit fix
-                        sg[i].addr_bus = (u32)virt_to_bus(p);
+                        /* sg_simple_element API is 32 bit, but addr < 4GB */
+                        sg[i].addr_bus = addr;
                 }
         }
 
@@ -1736,7 +1900,7 @@ static int adpt_i2o_passthru(adpt_hba* pHba, u32 __user *arg)
         if(sg_offset) {
         /* Copy back the Scatter Gather buffers back to user space */
                 u32 j;
-                // TODO 64bit fix
+                // TODO add 64 bit API
                 struct sg_simple_element* sg;
                 int sg_size;
 
@@ -1756,14 +1920,14 @@ static int adpt_i2o_passthru(adpt_hba* pHba, u32 __user *arg)
                 }
                 sg_count = (size - sg_offset*4) / sizeof(struct sg_simple_element);
 
-                // TODO 64bit fix
+                // TODO add 64 bit API
                 sg       = (struct sg_simple_element*)(msg + sg_offset);
                 for (j = 0; j < sg_count; j++) {
                         /* Copy out the SG list to user's buffer if necessary */
                         if(! (sg[j].flag_count & 0x4000000 /*I2O_SGL_FLAGS_DIR*/)) {
                                 sg_size = sg[j].flag_count & 0xffffff; 
-                                // TODO 64bit fix
-                                if (copy_to_user((void __user *)sg[j].addr_bus,sg_list[j], sg_size)) {
+                                // sg_simple_element API is 32 bit
+                                if (copy_to_user((void __user *)(ulong)sg[j].addr_bus,sg_list[j], sg_size)) {
                                         printk(KERN_WARNING"%s: Could not copy %p TO user %x\n",pHba->name, sg_list[j], sg[j].addr_bus);
                                         rcode = -EFAULT;
                                         goto cleanup;
@@ -1787,12 +1951,17 @@ static int adpt_i2o_passthru(adpt_hba* pHba, u32 __user *arg)
 
 
 cleanup:
-        if (rcode != -ETIME && rcode != -EINTR)
+        if (rcode != -ETIME && rcode != -EINTR) {
+                struct sg_simple_element *sg =
+                                (struct sg_simple_element*) (msg +sg_offset);
                 kfree (reply);
-        while(sg_index) {
-                if(sg_list[--sg_index]) {
-                        if (rcode != -ETIME && rcode != -EINTR)
-                                kfree(sg_list[sg_index]);
+                while(sg_index) {
+                        if(sg_list[--sg_index]) {
+                                dma_free_coherent(&pHba->pDev->dev,
+                                        sg[sg_index].flag_count & 0xffffff,
+                                        sg_list[sg_index],
+                                        sg[sg_index].addr_bus);
+                        }
                 }
         }
         return rcode;
@@ -1978,6 +2147,38 @@ static int adpt_ioctl(struct inode *inode, struct file *file, uint cmd,
         return error;
 }
 
+#ifdef CONFIG_COMPAT
+static long compat_adpt_ioctl(struct file *file,
+                                unsigned int cmd, unsigned long arg)
+{
+        struct inode *inode;
+        long ret;
+ 
+        inode = file->f_dentry->d_inode;
+ 
+        lock_kernel();
+ 
+        switch(cmd) {
+                case DPT_SIGNATURE:
+                case I2OUSRCMD:
+                case DPT_CTRLINFO:
+                case DPT_SYSINFO:
+                case DPT_BLINKLED:
+                case I2ORESETCMD:
+                case I2ORESCANCMD:
+                case (DPT_TARGET_BUSY & 0xFFFF):
+                case DPT_TARGET_BUSY:
+                        ret = adpt_ioctl(inode, file, cmd, arg);
+                        break;
+                default:
+                        ret =  -ENOIOCTLCMD;
+        }
+ 
+        unlock_kernel();
+ 
+        return ret;
+}
+#endif
 
 static irqreturn_t adpt_isr(int irq, void *dev_id)
 {
@@ -2009,7 +2210,16 @@ static irqreturn_t adpt_isr(int irq, void *dev_id)
                                 goto out;
                         }
                 }
-                reply = bus_to_virt(m);
+                if (pHba->reply_pool_pa <= m &&
+                    m < pHba->reply_pool_pa +
+                        (pHba->reply_fifo_size * REPLY_FRAME_SIZE * 4)) {
+                        reply = (u8 *)pHba->reply_pool +
+                                                (m - pHba->reply_pool_pa);
+                } else {
+                        /* Ick, we should *never* be here */
+                        printk(KERN_ERR "dpti: reply frame not from pool\n");
+                        reply = (u8 *)bus_to_virt(m);
+                }
 
                 if (readl(reply) & MSG_FAIL) {
                         u32 old_m = readl(reply+28); 
@@ -2029,7 +2239,7 @@ static irqreturn_t adpt_isr(int irq, void *dev_id)
                 } 
                 context = readl(reply+8);
                 if(context & 0x40000000){ // IOCTL
-                        void *p = (void *)readl(reply+12);
+                        void *p = adpt_ioctl_from_context(pHba, readl(reply+12));
                         if( p != NULL) {
                                 memcpy_fromio(p, reply, REPLY_FRAME_SIZE * 4);
                         }
@@ -2043,15 +2253,17 @@ static irqreturn_t adpt_isr(int irq, void *dev_id)
                                 status = I2O_POST_WAIT_OK;
                         }
                         if(!(context & 0x40000000)) {
-                                cmd = (struct scsi_cmnd*) readl(reply+12); 
+                                cmd = adpt_cmd_from_context(pHba,
+                                                        readl(reply+12));
                                 if(cmd != NULL) {
                                         printk(KERN_WARNING"%s: Apparent SCSI cmd in Post Wait Context - cmd=%p context=%x\n", pHba->name, cmd, context);
                                 }
                         }
                         adpt_i2o_post_wait_complete(context, status);
                 } else { // SCSI message
-                        cmd = (struct scsi_cmnd*) readl(reply+12); 
+                        cmd = adpt_cmd_from_context (pHba, readl(reply+12));
                         if(cmd != NULL){
+                                scsi_dma_unmap(cmd);
                                 if(cmd->serial_number != 0) { // If not timedout
                                         adpt_i2o_to_scsi(reply, cmd);
                                 }
@@ -2072,6 +2284,7 @@ static s32 adpt_scsi_to_i2o(adpt_hba* pHba, struct scsi_cmnd* cmd, struct adpt_d
         int i;
         u32 msg[MAX_MESSAGE_SIZE];
         u32* mptr;
+        u32* lptr;
         u32 *lenptr;
         int direction;
         int scsidir;
@@ -2079,6 +2292,7 @@ static s32 adpt_scsi_to_i2o(adpt_hba* pHba, struct scsi_cmnd* cmd, struct adpt_d
         u32 len;
         u32 reqlen;
         s32 rcode;
+        dma_addr_t addr;
 
         memset(msg, 0 , sizeof(msg));
         len = scsi_bufflen(cmd);
@@ -2118,7 +2332,7 @@ static s32 adpt_scsi_to_i2o(adpt_hba* pHba, struct scsi_cmnd* cmd, struct adpt_d
         // I2O_CMD_SCSI_EXEC
         msg[1] = ((0xff<<24)|(HOST_TID<<12)|d->tid);
         msg[2] = 0;
-        msg[3] = (u32)cmd;      /* We want the SCSI control block back */
+        msg[3] = adpt_cmd_to_context(cmd);  /* Want SCSI control block back */
         // Our cards use the transaction context as the tag for queueing
         // Adaptec/DPT Private stuff 
         msg[4] = I2O_CMD_SCSI_EXEC|(DPT_ORGANIZATION_ID<<16);
@@ -2136,7 +2350,13 @@ static s32 adpt_scsi_to_i2o(adpt_hba* pHba, struct scsi_cmnd* cmd, struct adpt_d
         memcpy(mptr, cmd->cmnd, cmd->cmd_len);
         mptr+=4;
         lenptr=mptr++;          /* Remember me - fill in when we know */
-        reqlen = 14;            // SINGLE SGE
+        if (dpt_dma64(pHba)) {
+                reqlen = 16;            // SINGLE SGE
+                *mptr++ = (0x7C<<24)+(2<<16)+0x02; /* Enable 64 bit */
+                *mptr++ = 1 << PAGE_SHIFT;
+        } else {
+                reqlen = 14;            // SINGLE SGE
+        }
         /* Now fill in the SGList and command */
 
         nseg = scsi_dma_map(cmd);
@@ -2146,12 +2366,16 @@ static s32 adpt_scsi_to_i2o(adpt_hba* pHba, struct scsi_cmnd* cmd, struct adpt_d
 
                 len = 0;
                 scsi_for_each_sg(cmd, sg, nseg, i) {
+                        lptr = mptr;
                         *mptr++ = direction|0x10000000|sg_dma_len(sg);
                         len+=sg_dma_len(sg);
-                        *mptr++ = sg_dma_address(sg);
+                        addr = sg_dma_address(sg);
+                        *mptr++ = dma_low(addr);
+                        if (dpt_dma64(pHba))
+                                *mptr++ = dma_high(addr);
                         /* Make this an end of list */
                         if (i == nseg - 1)
-                                mptr[-2] = direction|0xD0000000|sg_dma_len(sg);
+                                *lptr = direction|0xD0000000|sg_dma_len(sg);
                 }
                 reqlen = mptr - msg;
                 *lenptr = len;
@@ -2177,13 +2401,13 @@ static s32 adpt_scsi_to_i2o(adpt_hba* pHba, struct scsi_cmnd* cmd, struct adpt_d
 }
 
 
-static s32 adpt_scsi_register(adpt_hba* pHba,struct scsi_host_template * sht)
+static s32 adpt_scsi_host_alloc(adpt_hba* pHba, struct scsi_host_template *sht)
 {
-        struct Scsi_Host *host = NULL;
+        struct Scsi_Host *host;
 
-        host = scsi_register(sht, sizeof(adpt_hba*));
+        host = scsi_host_alloc(sht, sizeof(adpt_hba*));
         if (host == NULL) {
-                printk ("%s: scsi_register returned NULL\n",pHba->name);
+                printk("%s: scsi_host_alloc returned NULL\n", pHba->name);
                 return -1;
         }
         host->hostdata[0] = (unsigned long)pHba;
@@ -2200,7 +2424,7 @@ static s32 adpt_scsi_register(adpt_hba* pHba,struct scsi_host_template * sht)
         host->max_lun = 256;
         host->max_channel = pHba->top_scsi_channel + 1;
         host->cmd_per_lun = 1;
-        host->unique_id = (uint) pHba;
+        host->unique_id = (u32)sys_tbl_pa + pHba->unit;
         host->sg_tablesize = pHba->sg_tablesize;
         host->can_queue = pHba->post_fifo_size;
 
@@ -2640,11 +2864,10 @@ static s32 adpt_send_nop(adpt_hba*pHba,u32 m)
 static s32 adpt_i2o_init_outbound_q(adpt_hba* pHba)
 {
         u8 *status;
+        dma_addr_t addr;
         u32 __iomem *msg = NULL;
         int i;
         ulong timeout = jiffies + TMOUT_INITOUTBOUND*HZ;
-        u32* ptr;
-        u32 outbound_frame;  // This had to be a 32 bit address
         u32 m;
 
         do {
@@ -2663,13 +2886,14 @@ static s32 adpt_i2o_init_outbound_q(adpt_hba* pHba)
 
         msg=(u32 __iomem *)(pHba->msg_addr_virt+m);
 
-        status = kzalloc(4, GFP_KERNEL|ADDR32);
+        status = dma_alloc_coherent(&pHba->pDev->dev, 4, &addr, GFP_KERNEL);
         if (!status) {
                 adpt_send_nop(pHba, m);
                 printk(KERN_WARNING"%s: IOP reset failed - no free memory.\n",
                         pHba->name);
                 return -ENOMEM;
         }
+        memset(status, 0, 4);
 
         writel(EIGHT_WORD_MSG_SIZE| SGL_OFFSET_6, &msg[0]);
         writel(I2O_CMD_OUTBOUND_INIT<<24 | HOST_TID<<12 | ADAPTER_TID, &msg[1]);
@@ -2678,7 +2902,7 @@ static s32 adpt_i2o_init_outbound_q(adpt_hba* pHba)
         writel(4096, &msg[4]);          /* Host page frame size */
         writel((REPLY_FRAME_SIZE)<<16|0x80, &msg[5]);   /* Outbound msg frame size and Initcode */
         writel(0xD0000004, &msg[6]);            /* Simple SG LE, EOB */
-        writel(virt_to_bus(status), &msg[7]);
+        writel((u32)addr, &msg[7]);
 
         writel(m, pHba->post_port);
         wmb();
@@ -2693,6 +2917,10 @@ static s32 adpt_i2o_init_outbound_q(adpt_hba* pHba)
                 rmb();
                 if(time_after(jiffies,timeout)){
                         printk(KERN_WARNING"%s: Timeout Initializing\n",pHba->name);
+                        /* We lose 4 bytes of "status" here, but we
+                           cannot free these because controller may
+                           awake and corrupt those bytes at any time */
+                        /* dma_free_coherent(&pHba->pDev->dev, 4, status, addr); */
                         return -ETIMEDOUT;
                 }
                 schedule_timeout_uninterruptible(1);
@@ -2701,25 +2929,30 @@ static s32 adpt_i2o_init_outbound_q(adpt_hba* pHba)
         // If the command was successful, fill the fifo with our reply
         // message packets
         if(*status != 0x04 /*I2O_EXEC_OUTBOUND_INIT_COMPLETE*/) {
-                kfree(status);
+                dma_free_coherent(&pHba->pDev->dev, 4, status, addr);
                 return -2;
         }
-        kfree(status);
+        dma_free_coherent(&pHba->pDev->dev, 4, status, addr);
 
-        kfree(pHba->reply_pool);
+        if(pHba->reply_pool != NULL) {
+                dma_free_coherent(&pHba->pDev->dev,
+                        pHba->reply_fifo_size * REPLY_FRAME_SIZE * 4,
+                        pHba->reply_pool, pHba->reply_pool_pa);
+        }
 
-        pHba->reply_pool = kzalloc(pHba->reply_fifo_size * REPLY_FRAME_SIZE * 4, GFP_KERNEL|ADDR32);
+        pHba->reply_pool = dma_alloc_coherent(&pHba->pDev->dev,
+                                pHba->reply_fifo_size * REPLY_FRAME_SIZE * 4,
+                                &pHba->reply_pool_pa, GFP_KERNEL);
         if (!pHba->reply_pool) {
                 printk(KERN_ERR "%s: Could not allocate reply pool\n", pHba->name);
                 return -ENOMEM;
         }
+        memset(pHba->reply_pool, 0 , pHba->reply_fifo_size * REPLY_FRAME_SIZE * 4);
 
-        ptr = pHba->reply_pool;
         for(i = 0; i < pHba->reply_fifo_size; i++) {
-                outbound_frame = (u32)virt_to_bus(ptr);
-                writel(outbound_frame, pHba->reply_port);
+                writel(pHba->reply_pool_pa + (i * REPLY_FRAME_SIZE * 4),
+                        pHba->reply_port);
                 wmb();
-                ptr +=  REPLY_FRAME_SIZE;
         }
         adpt_i2o_status_get(pHba);
         return 0;
@@ -2743,11 +2976,11 @@ static s32 adpt_i2o_status_get(adpt_hba* pHba)
         u32 m;
         u32 __iomem *msg;
         u8 *status_block=NULL;
-        ulong status_block_bus;
 
         if(pHba->status_block == NULL) {
-                pHba->status_block = (i2o_status_block*)
-                        kmalloc(sizeof(i2o_status_block),GFP_KERNEL|ADDR32);
+                pHba->status_block = dma_alloc_coherent(&pHba->pDev->dev,
+                                        sizeof(i2o_status_block),
+                                        &pHba->status_block_pa, GFP_KERNEL);
                 if(pHba->status_block == NULL) {
                         printk(KERN_ERR
                         "dpti%d: Get Status Block failed; Out of memory. \n", 
@@ -2757,7 +2990,6 @@ static s32 adpt_i2o_status_get(adpt_hba* pHba)
         }
         memset(pHba->status_block, 0, sizeof(i2o_status_block));
         status_block = (u8*)(pHba->status_block);
-        status_block_bus = virt_to_bus(pHba->status_block);
         timeout = jiffies+TMOUT_GETSTATUS*HZ;
         do {
                 rmb();
@@ -2782,8 +3014,8 @@ static s32 adpt_i2o_status_get(adpt_hba* pHba)
         writel(0, &msg[3]);
         writel(0, &msg[4]);
         writel(0, &msg[5]);
-        writel(((u32)status_block_bus)&0xffffffff, &msg[6]);
-        writel(0, &msg[7]);
+        writel( dma_low(pHba->status_block_pa), &msg[6]);
+        writel( dma_high(pHba->status_block_pa), &msg[7]);
         writel(sizeof(i2o_status_block), &msg[8]); // 88 bytes
 
         //post message
@@ -2812,7 +3044,17 @@ static s32 adpt_i2o_status_get(adpt_hba* pHba)
         }
 
         // Calculate the Scatter Gather list size
-        pHba->sg_tablesize = (pHba->status_block->inbound_frame_size * 4 -40)/ sizeof(struct sg_simple_element);
+        if (dpt_dma64(pHba)) {
+                pHba->sg_tablesize
+                  = ((pHba->status_block->inbound_frame_size * 4
+                  - 14 * sizeof(u32))
+                  / (sizeof(struct sg_simple_element) + sizeof(u32)));
+        } else {
+                pHba->sg_tablesize
+                  = ((pHba->status_block->inbound_frame_size * 4
+                  - 12 * sizeof(u32))
+                  / sizeof(struct sg_simple_element));
+        }
         if (pHba->sg_tablesize > SG_LIST_ELEMENTS) {
                 pHba->sg_tablesize = SG_LIST_ELEMENTS;
         }
@@ -2863,7 +3105,9 @@ static int adpt_i2o_lct_get(adpt_hba* pHba)
         }
         do {
                 if (pHba->lct == NULL) {
-                        pHba->lct = kmalloc(pHba->lct_size, GFP_KERNEL|ADDR32);
+                        pHba->lct = dma_alloc_coherent(&pHba->pDev->dev,
+                                        pHba->lct_size, &pHba->lct_pa,
+                                        GFP_KERNEL);
                         if(pHba->lct == NULL) {
                                 printk(KERN_CRIT "%s: Lct Get failed. Out of memory.\n",
                                         pHba->name);
@@ -2879,7 +3123,7 @@ static int adpt_i2o_lct_get(adpt_hba* pHba)
                 msg[4] = 0xFFFFFFFF;    /* All devices */
                 msg[5] = 0x00000000;    /* Report now */
                 msg[6] = 0xD0000000|pHba->lct_size;
-                msg[7] = virt_to_bus(pHba->lct);
+                msg[7] = (u32)pHba->lct_pa;
 
                 if ((ret=adpt_i2o_post_wait(pHba, msg, sizeof(msg), 360))) {
                         printk(KERN_ERR "%s: LCT Get failed (status=%#10x.\n", 
@@ -2890,7 +3134,8 @@ static int adpt_i2o_lct_get(adpt_hba* pHba)
 
                 if ((pHba->lct->table_size << 2) > pHba->lct_size) {
                         pHba->lct_size = pHba->lct->table_size << 2;
-                        kfree(pHba->lct);
+                        dma_free_coherent(&pHba->pDev->dev, pHba->lct_size,
+                                        pHba->lct, pHba->lct_pa);
                         pHba->lct = NULL;
                 }
         } while (pHba->lct == NULL);
@@ -2901,13 +3146,19 @@ static int adpt_i2o_lct_get(adpt_hba* pHba)
         // I2O_DPT_EXEC_IOP_BUFFERS_GROUP_NO;
         if(adpt_i2o_query_scalar(pHba, 0 , 0x8000, -1, buf, sizeof(buf))>=0) {
                 pHba->FwDebugBufferSize = buf[1];
-                pHba->FwDebugBuffer_P    = pHba->base_addr_virt + buf[0];
-                pHba->FwDebugFlags_P     = pHba->FwDebugBuffer_P + FW_DEBUG_FLAGS_OFFSET;
-                pHba->FwDebugBLEDvalue_P = pHba->FwDebugBuffer_P + FW_DEBUG_BLED_OFFSET;
-                pHba->FwDebugBLEDflag_P  = pHba->FwDebugBLEDvalue_P + 1;
-                pHba->FwDebugStrLength_P = pHba->FwDebugBuffer_P + FW_DEBUG_STR_LENGTH_OFFSET;
-                pHba->FwDebugBuffer_P += buf[2]; 
-                pHba->FwDebugFlags = 0;
+                pHba->FwDebugBuffer_P = ioremap(pHba->base_addr_phys + buf[0],
+                                                pHba->FwDebugBufferSize);
+                if (pHba->FwDebugBuffer_P) {
+                        pHba->FwDebugFlags_P     = pHba->FwDebugBuffer_P +
+                                                        FW_DEBUG_FLAGS_OFFSET;
+                        pHba->FwDebugBLEDvalue_P = pHba->FwDebugBuffer_P +
+                                                        FW_DEBUG_BLED_OFFSET;
+                        pHba->FwDebugBLEDflag_P  = pHba->FwDebugBLEDvalue_P + 1;
+                        pHba->FwDebugStrLength_P = pHba->FwDebugBuffer_P +
+                                                FW_DEBUG_STR_LENGTH_OFFSET;
+                        pHba->FwDebugBuffer_P += buf[2]; 
+                        pHba->FwDebugFlags = 0;
+                }
         }
 
         return 0;
@@ -2915,25 +3166,30 @@ static int adpt_i2o_lct_get(adpt_hba* pHba)
 
 static int adpt_i2o_build_sys_table(void)
 {
-        adpt_hba* pHba = NULL;
+        adpt_hba* pHba = hba_chain;
         int count = 0;
 
+        if (sys_tbl)
+                dma_free_coherent(&pHba->pDev->dev, sys_tbl_len,
+                                        sys_tbl, sys_tbl_pa);
+
         sys_tbl_len = sizeof(struct i2o_sys_tbl) +      // Header + IOPs
                                 (hba_count) * sizeof(struct i2o_sys_tbl_entry);
 
-        kfree(sys_tbl);
-
-        sys_tbl = kzalloc(sys_tbl_len, GFP_KERNEL|ADDR32);
+        sys_tbl = dma_alloc_coherent(&pHba->pDev->dev,
+                                sys_tbl_len, &sys_tbl_pa, GFP_KERNEL);
         if (!sys_tbl) {
                 printk(KERN_WARNING "SysTab Set failed. Out of memory.\n");     
                 return -ENOMEM;
         }
+        memset(sys_tbl, 0, sys_tbl_len);
 
         sys_tbl->num_entries = hba_count;
         sys_tbl->version = I2OVERSION;
         sys_tbl->change_ind = sys_tbl_ind++;
 
         for(pHba = hba_chain; pHba; pHba = pHba->next) {
+                u64 addr;
                 // Get updated Status Block so we have the latest information
                 if (adpt_i2o_status_get(pHba)) {
                         sys_tbl->num_entries--;
@@ -2949,8 +3205,9 @@ static int adpt_i2o_build_sys_table(void)
                 sys_tbl->iops[count].frame_size = pHba->status_block->inbound_frame_size;
                 sys_tbl->iops[count].last_changed = sys_tbl_ind - 1; // ??
                 sys_tbl->iops[count].iop_capabilities = pHba->status_block->iop_capabilities;
-                sys_tbl->iops[count].inbound_low = (u32)virt_to_bus(pHba->post_port);
-                sys_tbl->iops[count].inbound_high = (u32)((u64)virt_to_bus(pHba->post_port)>>32);
+                addr = pHba->base_addr_phys + 0x40;
+                sys_tbl->iops[count].inbound_low = dma_low(addr);
+                sys_tbl->iops[count].inbound_high = dma_high(addr);
 
                 count++;
         }
@@ -3086,7 +3343,8 @@ static s32 adpt_i2o_hrt_get(adpt_hba* pHba)
 
         do {
                 if (pHba->hrt == NULL) {
-                        pHba->hrt=kmalloc(size, GFP_KERNEL|ADDR32);
+                        pHba->hrt = dma_alloc_coherent(&pHba->pDev->dev,
+                                        size, &pHba->hrt_pa, GFP_KERNEL);
                         if (pHba->hrt == NULL) {
                                 printk(KERN_CRIT "%s: Hrt Get failed; Out of memory.\n", pHba->name);
                                 return -ENOMEM;
@@ -3098,7 +3356,7 @@ static s32 adpt_i2o_hrt_get(adpt_hba* pHba)
                 msg[2]= 0;
                 msg[3]= 0;
                 msg[4]= (0xD0000000 | size);    /* Simple transaction */
-                msg[5]= virt_to_bus(pHba->hrt);   /* Dump it here */
+                msg[5]= (u32)pHba->hrt_pa;      /* Dump it here */
 
                 if ((ret = adpt_i2o_post_wait(pHba, msg, sizeof(msg),20))) {
                         printk(KERN_ERR "%s: Unable to get HRT (status=%#10x)\n", pHba->name, ret);
@@ -3106,8 +3364,10 @@ static s32 adpt_i2o_hrt_get(adpt_hba* pHba)
                 }
 
                 if (pHba->hrt->num_entries * pHba->hrt->entry_len << 2 > size) {
-                        size = pHba->hrt->num_entries * pHba->hrt->entry_len << 2;
-                        kfree(pHba->hrt);
+                        int newsize = pHba->hrt->num_entries * pHba->hrt->entry_len << 2;
+                        dma_free_coherent(&pHba->pDev->dev, size,
+                                pHba->hrt, pHba->hrt_pa);
+                        size = newsize;
                         pHba->hrt = NULL;
                 }
         } while(pHba->hrt == NULL);
@@ -3121,33 +3381,54 @@ static int adpt_i2o_query_scalar(adpt_hba* pHba, int tid,
                         int group, int field, void *buf, int buflen)
 {
         u16 opblk[] = { 1, 0, I2O_PARAMS_FIELD_GET, group, 1, field };
-        u8 *resblk;
+        u8 *opblk_va;
+        dma_addr_t opblk_pa;
+        u8 *resblk_va;
+        dma_addr_t resblk_pa;
 
         int size;
 
         /* 8 bytes for header */
-        resblk = kmalloc(sizeof(u8) * (8+buflen), GFP_KERNEL|ADDR32);
-        if (resblk == NULL) {
+        resblk_va = dma_alloc_coherent(&pHba->pDev->dev,
+                        sizeof(u8) * (8 + buflen), &resblk_pa, GFP_KERNEL);
+        if (resblk_va == NULL) {
                 printk(KERN_CRIT "%s: query scalar failed; Out of memory.\n", pHba->name);
                 return -ENOMEM;
         }
 
+        opblk_va = dma_alloc_coherent(&pHba->pDev->dev,
+                        sizeof(opblk), &opblk_pa, GFP_KERNEL);
+        if (opblk_va == NULL) {
+                dma_free_coherent(&pHba->pDev->dev, sizeof(u8) * (8+buflen),
+                        resblk_va, resblk_pa);
+                printk(KERN_CRIT "%s: query operatio failed; Out of memory.\n",
+                        pHba->name);
+                return -ENOMEM;
+        }
         if (field == -1)                /* whole group */
                         opblk[4] = -1;
 
+        memcpy(opblk_va, opblk, sizeof(opblk));
         size = adpt_i2o_issue_params(I2O_CMD_UTIL_PARAMS_GET, pHba, tid, 
-                opblk, sizeof(opblk), resblk, sizeof(u8)*(8+buflen));
+                opblk_va, opblk_pa, sizeof(opblk),
+                resblk_va, resblk_pa, sizeof(u8)*(8+buflen));
+        dma_free_coherent(&pHba->pDev->dev, sizeof(opblk), opblk_va, opblk_pa);
         if (size == -ETIME) {
+                dma_free_coherent(&pHba->pDev->dev, sizeof(u8) * (8+buflen),
+                                                        resblk_va, resblk_pa);
                 printk(KERN_WARNING "%s: issue params failed; Timed out.\n", pHba->name);
                 return -ETIME;
         } else if (size == -EINTR) {
+                dma_free_coherent(&pHba->pDev->dev, sizeof(u8) * (8+buflen),
+                                                        resblk_va, resblk_pa);
                 printk(KERN_WARNING "%s: issue params failed; Interrupted.\n", pHba->name);
                 return -EINTR;
         }
                         
-        memcpy(buf, resblk+8, buflen);  /* cut off header */
+        memcpy(buf, resblk_va+8, buflen);  /* cut off header */
 
-        kfree(resblk);
+        dma_free_coherent(&pHba->pDev->dev, sizeof(u8) * (8+buflen),
+                                                resblk_va, resblk_pa);
         if (size < 0)
                 return size;    
 
@@ -3164,10 +3445,11 @@ static int adpt_i2o_query_scalar(adpt_hba* pHba, int tid,
  *      ResultCount, ErrorInfoSize, BlockStatus and BlockSize.
  */
 static int adpt_i2o_issue_params(int cmd, adpt_hba* pHba, int tid, 
-                  void *opblk, int oplen, void *resblk, int reslen)
+                  void *opblk_va,  dma_addr_t opblk_pa, int oplen,
+                void *resblk_va, dma_addr_t resblk_pa, int reslen)
 {
         u32 msg[9]; 
-        u32 *res = (u32 *)resblk;
+        u32 *res = (u32 *)resblk_va;
         int wait_status;
 
         msg[0] = NINE_WORD_MSG_SIZE | SGL_OFFSET_5;
@@ -3176,12 +3458,12 @@ static int adpt_i2o_issue_params(int cmd, adpt_hba* pHba, int tid,
         msg[3] = 0;
         msg[4] = 0;
         msg[5] = 0x54000000 | oplen;    /* OperationBlock */
-        msg[6] = virt_to_bus(opblk);
+        msg[6] = (u32)opblk_pa;
         msg[7] = 0xD0000000 | reslen;   /* ResultBlock */
-        msg[8] = virt_to_bus(resblk);
+        msg[8] = (u32)resblk_pa;
 
         if ((wait_status = adpt_i2o_post_wait(pHba, msg, sizeof(msg), 20))) {
-                printk("adpt_i2o_issue_params: post_wait failed (%p)\n", resblk);
+                printk("adpt_i2o_issue_params: post_wait failed (%p)\n", resblk_va);
                 return wait_status;     /* -DetailedStatus */
         }
 
@@ -3284,7 +3566,7 @@ static int adpt_i2o_systab_send(adpt_hba* pHba)
          * Private i/o space declaration  
          */
         msg[6] = 0x54000000 | sys_tbl_len;
-        msg[7] = virt_to_phys(sys_tbl);
+        msg[7] = (u32)sys_tbl_pa;
         msg[8] = 0x54000000 | 0;
         msg[9] = 0;
         msg[10] = 0xD4000000 | 0;
@@ -3323,11 +3605,10 @@ static static void adpt_delay(int millisec)
 #endif
 
 static struct scsi_host_template driver_template = {
+        .module                 = THIS_MODULE,
         .name                   = "dpt_i2o",
         .proc_name              = "dpt_i2o",
         .proc_info              = adpt_proc_info,
-        .detect                 = adpt_detect,
-        .release                = adpt_release,
         .info                   = adpt_info,
         .queuecommand           = adpt_queue,
         .eh_abort_handler       = adpt_abort,
@@ -3341,5 +3622,48 @@ static struct scsi_host_template driver_template = {
         .cmd_per_lun            = 1,
         .use_clustering         = ENABLE_CLUSTERING,
 };
-#include "scsi_module.c"
+
+static int __init adpt_init(void)
+{
+        int             error;
+        adpt_hba        *pHba, *next;
+
+        printk("Loading Adaptec I2O RAID: Version " DPT_I2O_VERSION "\n");
+
+        error = adpt_detect(&driver_template);
+        if (error < 0)
+                return error;
+        if (hba_chain == NULL)
+                return -ENODEV;
+
+        for (pHba = hba_chain; pHba; pHba = pHba->next) {
+                error = scsi_add_host(pHba->host, &pHba->pDev->dev);
+                if (error)
+                        goto fail;
+                scsi_scan_host(pHba->host);
+        }
+        return 0;
+fail:
+        for (pHba = hba_chain; pHba; pHba = next) {
+                next = pHba->next;
+                scsi_remove_host(pHba->host);
+        }
+        return error;
+}
+
+static void __exit adpt_exit(void)
+{
+        adpt_hba        *pHba, *next;
+
+        for (pHba = hba_chain; pHba; pHba = pHba->next)
+                scsi_remove_host(pHba->host);
+        for (pHba = hba_chain; pHba; pHba = next) {
+                next = pHba->next;
+                adpt_release(pHba->host);
+        }
+}
+
+module_init(adpt_init);
+module_exit(adpt_exit);
+
 MODULE_LICENSE("GPL");
diff --git a/drivers/scsi/dpti.h b/drivers/scsi/dpti.h
index fd79068c5869..924cd5a51676 100644
--- a/drivers/scsi/dpti.h
+++ b/drivers/scsi/dpti.h
@@ -84,7 +84,6 @@ static int adpt_device_reset(struct scsi_cmnd* cmd);
 #define PCI_DPT_DEVICE_ID         (0xA501)      // DPT PCI I2O Device ID
 #define PCI_DPT_RAPTOR_DEVICE_ID  (0xA511)      
 
-//#define REBOOT_NOTIFIER 1
 /* Debugging macro from Linux Device Drivers - Rubini */
 #undef PDEBUG
 #ifdef DEBUG
@@ -229,14 +228,19 @@ typedef struct _adpt_hba {
         u32  post_fifo_size;
         u32  reply_fifo_size;
         u32* reply_pool;
+        dma_addr_t reply_pool_pa;
         u32  sg_tablesize;      // Scatter/Gather List Size.       
         u8  top_scsi_channel;
         u8  top_scsi_id;
         u8  top_scsi_lun;
+        u8  dma64;
 
         i2o_status_block* status_block;
+        dma_addr_t status_block_pa;
         i2o_hrt* hrt;
+        dma_addr_t hrt_pa;
         i2o_lct* lct;
+        dma_addr_t lct_pa;
         uint lct_size;
         struct i2o_device* devices;
         struct adpt_channel channel[MAX_CHANNEL];
@@ -249,6 +253,7 @@ typedef struct _adpt_hba {
         void __iomem *FwDebugBLEDflag_P;// Virtual Addr Of FW Debug BLED
         void __iomem *FwDebugBLEDvalue_P;// Virtual Addr Of FW Debug BLED
         u32 FwDebugFlags;
+        u32 *ioctl_reply_context[4];
 } adpt_hba;
 
 struct sg_simple_element {
@@ -264,9 +269,6 @@ static void adpt_i2o_sys_shutdown(void);
 static int adpt_init(void);
 static int adpt_i2o_build_sys_table(void);
 static irqreturn_t adpt_isr(int irq, void *dev_id);
-#ifdef REBOOT_NOTIFIER
-static int adpt_reboot_event(struct notifier_block *n, ulong code, void *p);
-#endif
 
 static void adpt_i2o_report_hba_unit(adpt_hba* pHba, struct i2o_device *d);
 static int adpt_i2o_query_scalar(adpt_hba* pHba, int tid, 
@@ -275,7 +277,8 @@ static int adpt_i2o_query_scalar(adpt_hba* pHba, int tid,
 static const char *adpt_i2o_get_class_name(int class);
 #endif
 static int adpt_i2o_issue_params(int cmd, adpt_hba* pHba, int tid, 
-                  void *opblk, int oplen, void *resblk, int reslen);
+                  void *opblk, dma_addr_t opblk_pa, int oplen,
+                  void *resblk, dma_addr_t resblk_pa, int reslen);
 static int adpt_i2o_post_wait(adpt_hba* pHba, u32* msg, int len, int timeout);
 static int adpt_i2o_lct_get(adpt_hba* pHba);
 static int adpt_i2o_parse_lct(adpt_hba* pHba);
@@ -289,7 +292,7 @@ static s32 adpt_i2o_init_outbound_q(adpt_hba* pHba);
 static s32 adpt_i2o_hrt_get(adpt_hba* pHba);
 static s32 adpt_scsi_to_i2o(adpt_hba* pHba, struct scsi_cmnd* cmd, struct adpt_device* dptdevice);
 static s32 adpt_i2o_to_scsi(void __iomem *reply, struct scsi_cmnd* cmd);
-static s32 adpt_scsi_register(adpt_hba* pHba,struct scsi_host_template * sht);
+static s32 adpt_scsi_host_alloc(adpt_hba* pHba,struct scsi_host_template * sht);
 static s32 adpt_hba_reset(adpt_hba* pHba);
 static s32 adpt_i2o_reset_hba(adpt_hba* pHba);
 static s32 adpt_rescan(adpt_hba* pHba);
diff --git a/drivers/scsi/gdth.c b/drivers/scsi/gdth.c
index c6d6e7c6559a..8e2e964af668 100644
--- a/drivers/scsi/gdth.c
+++ b/drivers/scsi/gdth.c
@@ -465,7 +465,7 @@ int __gdth_execute(struct scsi_device *sdev, gdth_cmd_str *gdtcmd, char *cmnd,
     scp->request = (struct request *)&wait;
     scp->timeout_per_command = timeout*HZ;
     scp->cmd_len = 12;
-    memcpy(scp->cmnd, cmnd, 12);
+    scp->cmnd = cmnd;
     cmndinfo.priority = IOCTL_PRI;
     cmndinfo.internal_cmd_str = gdtcmd;
     cmndinfo.internal_command = 1;
diff --git a/drivers/scsi/hptiop.c b/drivers/scsi/hptiop.c
index 5b7be1e9841c..aaa48e0c8ed0 100644
--- a/drivers/scsi/hptiop.c
+++ b/drivers/scsi/hptiop.c
@@ -763,9 +763,9 @@ static int hptiop_queuecommand(struct scsi_cmnd *scp,
                         scp,
                         host->host_no, scp->device->channel,
                         scp->device->id, scp->device->lun,
-                        *((u32 *)&scp->cmnd),
-                        *((u32 *)&scp->cmnd + 1),
-                        *((u32 *)&scp->cmnd + 2),
+                        ((u32 *)scp->cmnd)[0],
+                        ((u32 *)scp->cmnd)[1],
+                        ((u32 *)scp->cmnd)[2],
                         _req->index, _req->req_virt);
 
         scp->result = 0;
diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c
index 4a922c57125e..ccfd8aca3765 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.c
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
@@ -686,7 +686,7 @@ static void handle_cmd_rsp(struct srp_event_struct *evt_struct)
         }
         
         if (cmnd) {
-                cmnd->result = rsp->status;
+                cmnd->result |= rsp->status;
                 if (((cmnd->result >> 1) & 0x1f) == CHECK_CONDITION)
                         memcpy(cmnd->sense_buffer,
                                rsp->data,
@@ -730,6 +730,7 @@ static int ibmvscsi_queuecommand(struct scsi_cmnd *cmnd,
         u16 lun = lun_from_dev(cmnd->device);
         u8 out_fmt, in_fmt;
 
+        cmnd->result = (DID_OK << 16);
         evt_struct = get_event_struct(&hostdata->pool);
         if (!evt_struct)
                 return SCSI_MLQUEUE_HOST_BUSY;
@@ -738,7 +739,7 @@ static int ibmvscsi_queuecommand(struct scsi_cmnd *cmnd,
         srp_cmd = &evt_struct->iu.srp.cmd;
         memset(srp_cmd, 0x00, SRP_MAX_IU_LEN);
         srp_cmd->opcode = SRP_CMD;
-        memcpy(srp_cmd->cdb, cmnd->cmnd, sizeof(cmnd->cmnd));
+        memcpy(srp_cmd->cdb, cmnd->cmnd, sizeof(srp_cmd->cdb));
         srp_cmd->lun = ((u64) lun) << 48;
 
         if (!map_data_for_srp_cmd(cmnd, evt_struct, srp_cmd, hostdata->dev)) {
@@ -1347,6 +1348,8 @@ void ibmvscsi_handle_crq(struct viosrp_crq *crq,
 
         del_timer(&evt_struct->timer);
 
+        if (crq->status != VIOSRP_OK && evt_struct->cmnd)
+                evt_struct->cmnd->result = DID_ERROR << 16;
         if (evt_struct->done)
                 evt_struct->done(evt_struct);
         else
diff --git a/drivers/scsi/ibmvscsi/viosrp.h b/drivers/scsi/ibmvscsi/viosrp.h
index 90f1a61283ad..4c4aadb3e405 100644
--- a/drivers/scsi/ibmvscsi/viosrp.h
+++ b/drivers/scsi/ibmvscsi/viosrp.h
@@ -59,6 +59,15 @@ enum viosrp_crq_formats {
         VIOSRP_INLINE_FORMAT = 0x07
 };
 
+enum viosrp_crq_status {
+        VIOSRP_OK = 0x0,
+        VIOSRP_NONRECOVERABLE_ERR = 0x1,
+        VIOSRP_VIOLATES_MAX_XFER = 0x2,
+        VIOSRP_PARTNER_PANIC = 0x3,
+        VIOSRP_DEVICE_BUSY = 0x8,
+        VIOSRP_ADAPTER_FAIL = 0x10
+};
+
 struct viosrp_crq {
         u8 valid;               /* used by RPA */
         u8 format;              /* SCSI vs out-of-band */
diff --git a/drivers/scsi/initio.c b/drivers/scsi/initio.c
index dbae3fdb8506..e3f739776bad 100644
--- a/drivers/scsi/initio.c
+++ b/drivers/scsi/initio.c
@@ -2590,7 +2590,7 @@ static void initio_build_scb(struct initio_host * host, struct scsi_ctrl_blk * c
         cblk->hastat = 0;
         cblk->tastat = 0;
         /* Command the command */
-        memcpy(&cblk->cdb[0], &cmnd->cmnd, cmnd->cmd_len);
+        memcpy(cblk->cdb, cmnd->cmnd, cmnd->cmd_len);
 
         /* Set up tags */
         if (cmnd->device->tagged_supported) {   /* Tag Support                  */
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index de5ae6a65029..999e91ea7451 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -2791,7 +2791,7 @@ static ssize_t ipr_store_adapter_state(struct device *dev,
 
 static struct device_attribute ipr_ioa_state_attr = {
         .attr = {
-                .name =         "state",
+                .name =         "online_state",
                 .mode =         S_IRUGO | S_IWUSR,
         },
         .show = ipr_show_adapter_state,
diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c
index 820f91fb63ba..70a0f11f48b2 100644
--- a/drivers/scsi/megaraid/megaraid_mbox.c
+++ b/drivers/scsi/megaraid/megaraid_mbox.c
@@ -3168,6 +3168,23 @@ megaraid_mbox_support_random_del(adapter_t *adapter)
         uint8_t         raw_mbox[sizeof(mbox_t)];
         int             rval;
 
+        /*
+         * Newer firmware on Dell CERC expect a different
+         * random deletion handling, so disable it.
+         */
+        if (adapter->pdev->vendor == PCI_VENDOR_ID_AMI &&
+            adapter->pdev->device == PCI_DEVICE_ID_AMI_MEGARAID3 &&
+            adapter->pdev->subsystem_vendor == PCI_VENDOR_ID_DELL &&
+            adapter->pdev->subsystem_device == PCI_SUBSYS_ID_CERC_ATA100_4CH &&
+            (adapter->fw_version[0] > '6' ||
+             (adapter->fw_version[0] == '6' &&
+              adapter->fw_version[2] > '6') ||
+             (adapter->fw_version[0] == '6'
+              && adapter->fw_version[2] == '6'
+              && adapter->fw_version[3] > '1'))) {
+                con_log(CL_DLEVEL1, ("megaraid: disable random deletion\n"));
+                return 0;
+        }
 
         mbox = (mbox_t *)raw_mbox;
 
diff --git a/drivers/scsi/megaraid/megaraid_mbox.h b/drivers/scsi/megaraid/megaraid_mbox.h
index 626459d1e902..c1d86d961a92 100644
--- a/drivers/scsi/megaraid/megaraid_mbox.h
+++ b/drivers/scsi/megaraid/megaraid_mbox.h
@@ -88,6 +88,7 @@
 #define PCI_SUBSYS_ID_PERC3_QC                          0x0471
 #define PCI_SUBSYS_ID_PERC3_DC                          0x0493
 #define PCI_SUBSYS_ID_PERC3_SC                          0x0475
+#define PCI_SUBSYS_ID_CERC_ATA100_4CH                   0x0511
 
 
 #define MBOX_MAX_SCSI_CMDS      128     // number of cmds reserved for kernel
diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c
index b937e9cddb23..7d84c8bbcf3f 100644
--- a/drivers/scsi/megaraid/megaraid_sas.c
+++ b/drivers/scsi/megaraid/megaraid_sas.c
@@ -10,7 +10,7 @@
  *         2 of the License, or (at your option) any later version.
  *
  * FILE         : megaraid_sas.c
- * Version      : v00.00.03.16-rc1
+ * Version      : v00.00.03.20-rc1
  *
  * Authors:
  *      (email-id : megaraidlinux@lsi.com)
@@ -2650,12 +2650,13 @@ static void megasas_shutdown_controller(struct megasas_instance *instance,
         return;
 }
 
+#ifdef CONFIG_PM
 /**
  * megasas_suspend -    driver suspend entry point
  * @pdev:               PCI device structure
  * @state:              PCI power state to suspend routine
  */
-static int __devinit
+static int
 megasas_suspend(struct pci_dev *pdev, pm_message_t state)
 {
         struct Scsi_Host *host;
@@ -2687,7 +2688,7 @@ megasas_suspend(struct pci_dev *pdev, pm_message_t state)
  * megasas_resume-      driver resume entry point
  * @pdev:               PCI device structure
  */
-static int __devinit
+static int
 megasas_resume(struct pci_dev *pdev)
 {
         int rval;
@@ -2782,12 +2783,16 @@ fail_ready_state:
 
         return -ENODEV;
 }
+#else
+#define megasas_suspend NULL
+#define megasas_resume  NULL
+#endif
 
 /**
  * megasas_detach_one - PCI hot"un"plug entry point
  * @pdev:               PCI device structure
  */
-static void megasas_detach_one(struct pci_dev *pdev)
+static void __devexit megasas_detach_one(struct pci_dev *pdev)
 {
         int i;
         struct Scsi_Host *host;
diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h
index 3a997eb457bf..b0c41e671702 100644
--- a/drivers/scsi/megaraid/megaraid_sas.h
+++ b/drivers/scsi/megaraid/megaraid_sas.h
@@ -18,9 +18,9 @@
 /*
  * MegaRAID SAS Driver meta data
  */
-#define MEGASAS_VERSION                         "00.00.03.16-rc1"
-#define MEGASAS_RELDATE                         "Nov. 07, 2007"
-#define MEGASAS_EXT_VERSION                     "Thu. Nov. 07 10:09:32 PDT 2007"
+#define MEGASAS_VERSION                 "00.00.03.20-rc1"
+#define MEGASAS_RELDATE                 "March 10, 2008"
+#define MEGASAS_EXT_VERSION             "Mon. March 10 11:02:31 PDT 2008"
 
 /*
  * Device IDs
diff --git a/drivers/scsi/mvsas.c b/drivers/scsi/mvsas.c
index e55b9037adb2..1dd70d7a4947 100644
--- a/drivers/scsi/mvsas.c
+++ b/drivers/scsi/mvsas.c
@@ -2822,7 +2822,9 @@ static void mvs_update_phyinfo(struct mvs_info *mvi, int i,
                 dev_printk(KERN_DEBUG, &pdev->dev,
                         "phy[%d] Get Attached Address 0x%llX ,"
                         " SAS Address 0x%llX\n",
-                        i, phy->att_dev_sas_addr, phy->dev_sas_addr);
+                        i,
+                        (unsigned long long)phy->att_dev_sas_addr,
+                        (unsigned long long)phy->dev_sas_addr);
                 dev_printk(KERN_DEBUG, &pdev->dev,
                         "Rate = %x , type = %d\n",
                         sas_phy->linkrate, phy->phy_type);
diff --git a/drivers/scsi/ncr53c8xx.c b/drivers/scsi/ncr53c8xx.c
index ceab4f73caf1..c57c94c0ffd2 100644
--- a/drivers/scsi/ncr53c8xx.c
+++ b/drivers/scsi/ncr53c8xx.c
@@ -8222,7 +8222,7 @@ static void process_waiting_list(struct ncb *np, int sts)
 #ifdef DEBUG_WAITING_LIST
         if (waiting_list) printk("%s: waiting_list=%lx processing sts=%d\n", ncr_name(np), (u_long) waiting_list, sts);
 #endif
-        while (wcmd = waiting_list) {
+        while ((wcmd = waiting_list) != NULL) {
                 waiting_list = (struct scsi_cmnd *) wcmd->next_wcmd;
                 wcmd->next_wcmd = NULL;
                 if (sts == DID_OK) {
diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c
index 09ab3eac1c1a..fa060932d2b4 100644
--- a/drivers/scsi/qla1280.c
+++ b/drivers/scsi/qla1280.c
@@ -2858,7 +2858,7 @@ qla1280_64bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp)
 
         /* Load SCSI command packet. */
         pkt->cdb_len = cpu_to_le16(CMD_CDBLEN(cmd));
-        memcpy(pkt->scsi_cdb, &(CMD_CDBP(cmd)), CMD_CDBLEN(cmd));
+        memcpy(pkt->scsi_cdb, CMD_CDBP(cmd), CMD_CDBLEN(cmd));
         /* dprintk(1, "Build packet for command[0]=0x%x\n",pkt->scsi_cdb[0]); */
 
         /* Set transfer direction. */
@@ -3127,7 +3127,7 @@ qla1280_32bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp)
 
         /* Load SCSI command packet. */
         pkt->cdb_len = cpu_to_le16(CMD_CDBLEN(cmd));
-        memcpy(pkt->scsi_cdb, &(CMD_CDBP(cmd)), CMD_CDBLEN(cmd));
+        memcpy(pkt->scsi_cdb, CMD_CDBP(cmd), CMD_CDBLEN(cmd));
 
         /*dprintk(1, "Build packet for command[0]=0x%x\n",pkt->scsi_cdb[0]); */
         /* Set transfer direction. */
diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
index 12d69d7c8577..110e776d1a07 100644
--- a/drivers/scsi/scsi.c
+++ b/drivers/scsi/scsi.c
@@ -79,15 +79,6 @@ static void scsi_done(struct scsi_cmnd *cmd);
 #define MIN_RESET_PERIOD (15*HZ)
 
 /*
- * Macro to determine the size of SCSI command. This macro takes vendor
- * unique commands into account. SCSI commands in groups 6 and 7 are
- * vendor unique and we will depend upon the command length being
- * supplied correctly in cmd_len.
- */
-#define CDB_SIZE(cmd)   (((((cmd)->cmnd[0] >> 5) & 7) < 6) ? \
-                                COMMAND_SIZE((cmd)->cmnd[0]) : (cmd)->cmd_len)
-
-/*
  * Note - the initial logging level can be set here to log events at boot time.
  * After the system is up, you may enable logging via the /proc interface.
  */
@@ -469,6 +460,7 @@ int scsi_setup_command_freelist(struct Scsi_Host *shost)
         cmd = scsi_pool_alloc_command(shost->cmd_pool, gfp_mask);
         if (!cmd) {
                 scsi_put_host_cmd_pool(gfp_mask);
+                shost->cmd_pool = NULL;
                 return -ENOMEM;
         }
         list_add(&cmd->list, &shost->free_list);
@@ -481,6 +473,13 @@ int scsi_setup_command_freelist(struct Scsi_Host *shost)
  */
 void scsi_destroy_command_freelist(struct Scsi_Host *shost)
 {
+        /*
+         * If cmd_pool is NULL the free list was not initialized, so
+         * do not attempt to release resources.
+         */
+        if (!shost->cmd_pool)
+                return;
+
         while (!list_empty(&shost->free_list)) {
                 struct scsi_cmnd *cmd;
 
@@ -701,9 +700,11 @@ int scsi_dispatch_cmd(struct scsi_cmnd *cmd)
          * Before we queue this command, check if the command
          * length exceeds what the host adapter can handle.
          */
-        if (CDB_SIZE(cmd) > cmd->device->host->max_cmd_len) {
+        if (cmd->cmd_len > cmd->device->host->max_cmd_len) {
                 SCSI_LOG_MLQUEUE(3,
-                                printk("queuecommand : command too long.\n"));
+                        printk("queuecommand : command too long. "
+                               "cdb_size=%d host->max_cmd_len=%d\n",
+                               cmd->cmd_len, cmd->device->host->max_cmd_len));
                 cmd->result = (DID_ABORT << 16);
 
                 scsi_done(cmd);
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index 1eaba6cd80f4..eaf5a8add1ba 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -626,7 +626,7 @@ static void scsi_abort_eh_cmnd(struct scsi_cmnd *scmd)
  * @scmd:       SCSI command structure to hijack
  * @ses:        structure to save restore information
  * @cmnd:       CDB to send. Can be NULL if no new cmnd is needed
- * @cmnd_size:  size in bytes of @cmnd
+ * @cmnd_size:  size in bytes of @cmnd (must be <= BLK_MAX_CDB)
  * @sense_bytes: size of sense data to copy. or 0 (if != 0 @cmnd is ignored)
  *
  * This function is used to save a scsi command information before re-execution
@@ -648,12 +648,14 @@ void scsi_eh_prep_cmnd(struct scsi_cmnd *scmd, struct scsi_eh_save *ses,
          * command.
          */
         ses->cmd_len = scmd->cmd_len;
-        memcpy(ses->cmnd, scmd->cmnd, sizeof(scmd->cmnd));
+        ses->cmnd = scmd->cmnd;
         ses->data_direction = scmd->sc_data_direction;
         ses->sdb = scmd->sdb;
         ses->next_rq = scmd->request->next_rq;
         ses->result = scmd->result;
 
+        scmd->cmnd = ses->eh_cmnd;
+        memset(scmd->cmnd, 0, BLK_MAX_CDB);
         memset(&scmd->sdb, 0, sizeof(scmd->sdb));
         scmd->request->next_rq = NULL;
 
@@ -665,14 +667,13 @@ void scsi_eh_prep_cmnd(struct scsi_cmnd *scmd, struct scsi_eh_save *ses,
                 scmd->sdb.table.sgl = &ses->sense_sgl;
                 scmd->sc_data_direction = DMA_FROM_DEVICE;
                 scmd->sdb.table.nents = 1;
-                memset(scmd->cmnd, 0, sizeof(scmd->cmnd));
                 scmd->cmnd[0] = REQUEST_SENSE;
                 scmd->cmnd[4] = scmd->sdb.length;
                 scmd->cmd_len = COMMAND_SIZE(scmd->cmnd[0]);
         } else {
                 scmd->sc_data_direction = DMA_NONE;
                 if (cmnd) {
-                        memset(scmd->cmnd, 0, sizeof(scmd->cmnd));
+                        BUG_ON(cmnd_size > BLK_MAX_CDB);
                         memcpy(scmd->cmnd, cmnd, cmnd_size);
                         scmd->cmd_len = COMMAND_SIZE(scmd->cmnd[0]);
                 }
@@ -705,7 +706,7 @@ void scsi_eh_restore_cmnd(struct scsi_cmnd* scmd, struct scsi_eh_save *ses)
          * Restore original data
          */
         scmd->cmd_len = ses->cmd_len;
-        memcpy(scmd->cmnd, ses->cmnd, sizeof(scmd->cmnd));
+        scmd->cmnd = ses->cmnd;
         scmd->sc_data_direction = ses->data_direction;
         scmd->sdb = ses->sdb;
         scmd->request->next_rq = ses->next_rq;
@@ -1775,8 +1776,8 @@ scsi_reset_provider(struct scsi_device *dev, int flag)
         scmd->request = &req;
         memset(&scmd->eh_timeout, 0, sizeof(scmd->eh_timeout));
 
-        memset(&scmd->cmnd, '\0', sizeof(scmd->cmnd));
-    
+        scmd->cmnd = req.cmd;
+
         scmd->scsi_done         = scsi_reset_provider_done_command;
         memset(&scmd->sdb, 0, sizeof(scmd->sdb));
 
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index d545ad1cf47a..a82d2fe80fb5 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -445,7 +445,7 @@ static void scsi_init_cmd_errh(struct scsi_cmnd *cmd)
         scsi_set_resid(cmd, 0);
         memset(cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
         if (cmd->cmd_len == 0)
-                cmd->cmd_len = COMMAND_SIZE(cmd->cmnd[0]);
+                cmd->cmd_len = scsi_command_size(cmd->cmnd);
 }
 
 void scsi_device_unbusy(struct scsi_device *sdev)
@@ -1094,6 +1094,8 @@ static struct scsi_cmnd *scsi_get_cmd_from_req(struct scsi_device *sdev,
         cmd->tag = req->tag;
         cmd->request = req;
 
+        cmd->cmnd = req->cmd;
+
         return cmd;
 }
 
@@ -1131,8 +1133,6 @@ int scsi_setup_blk_pc_cmnd(struct scsi_device *sdev, struct request *req)
                 req->buffer = NULL;
         }
 
-        BUILD_BUG_ON(sizeof(req->cmd) > sizeof(cmd->cmnd));
-        memcpy(cmd->cmnd, req->cmd, sizeof(cmd->cmnd));
         cmd->cmd_len = req->cmd_len;
         if (!req->data_len)
                 cmd->sc_data_direction = DMA_NONE;
@@ -1169,6 +1169,7 @@ int scsi_setup_fs_cmnd(struct scsi_device *sdev, struct request *req)
         if (unlikely(!cmd))
                 return BLKPREP_DEFER;
 
+        memset(cmd->cmnd, 0, BLK_MAX_CDB);
         return scsi_init_io(cmd, GFP_ATOMIC);
 }
 EXPORT_SYMBOL(scsi_setup_fs_cmnd);
diff --git a/drivers/scsi/scsi_tgt_lib.c b/drivers/scsi/scsi_tgt_lib.c
index ee8496aa0336..257e097c39af 100644
--- a/drivers/scsi/scsi_tgt_lib.c
+++ b/drivers/scsi/scsi_tgt_lib.c
@@ -107,6 +107,8 @@ struct scsi_cmnd *scsi_host_get_command(struct Scsi_Host *shost,
         cmd->jiffies_at_alloc = jiffies;
         cmd->request = rq;
 
+        cmd->cmnd = rq->cmd;
+
         rq->special = cmd;
         rq->cmd_type = REQ_TYPE_SPECIAL;
         rq->cmd_flags |= REQ_TYPE_BLOCK_PC;
diff --git a/drivers/scsi/u14-34f.c b/drivers/scsi/u14-34f.c
index 640333b1e75c..329eb8780e74 100644
--- a/drivers/scsi/u14-34f.c
+++ b/drivers/scsi/u14-34f.c
@@ -744,7 +744,8 @@ static int wait_on_busy(unsigned long iobase, unsigned int loop) {
 static int board_inquiry(unsigned int j) {
    struct mscp *cpp;
    dma_addr_t id_dma_addr;
-   unsigned int time, limit = 0;
+   unsigned int limit = 0;
+   unsigned long time;
 
    id_dma_addr = pci_map_single(HD(j)->pdev, HD(j)->board_id,
                     sizeof(HD(j)->board_id), PCI_DMA_BIDIRECTIONAL);
@@ -1392,7 +1393,8 @@ static int u14_34f_eh_abort(struct scsi_cmnd *SCarg) {
 }
 
 static int u14_34f_eh_host_reset(struct scsi_cmnd *SCarg) {
-   unsigned int i, j, time, k, c, limit = 0;
+   unsigned int i, j, k, c, limit = 0;
+   unsigned long time;
    int arg_done = FALSE;
    struct scsi_cmnd *SCpnt;
 
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index ea41f2626458..a1ca9b7bf2d5 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -2271,7 +2271,8 @@ static int serial8250_request_std_resource(struct uart_8250_port *up)
                 }
 
                 if (up->port.flags & UPF_IOREMAP) {
-                        up->port.membase = ioremap(up->port.mapbase, size);
+                        up->port.membase = ioremap_nocache(up->port.mapbase,
+                                                                        size);
                         if (!up->port.membase) {
                                 release_mem_region(up->port.mapbase, size);
                                 ret = -ENOMEM;
diff --git a/drivers/serial/8250_early.c b/drivers/serial/8250_early.c
index cd898704ba4f..f279745e9fef 100644
--- a/drivers/serial/8250_early.c
+++ b/drivers/serial/8250_early.c
@@ -153,7 +153,7 @@ static int __init parse_options(struct early_serial8250_device *device,
                         (void __iomem *)__fix_to_virt(FIX_EARLYCON_MEM_BASE);
                 port->membase += port->mapbase & ~PAGE_MASK;
 #else
-                port->membase = ioremap(port->mapbase, 64);
+                port->membase = ioremap_nocache(port->mapbase, 64);
                 if (!port->membase) {
                         printk(KERN_ERR "%s: Couldn't ioremap 0x%llx\n",
                                 __func__,
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index 6e57382b9137..53fa19cf2f06 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -86,7 +86,7 @@ setup_port(struct serial_private *priv, struct uart_port *port,
                 len =  pci_resource_len(dev, bar);
 
                 if (!priv->remapped_bar[bar])
-                        priv->remapped_bar[bar] = ioremap(base, len);
+                        priv->remapped_bar[bar] = ioremap_nocache(base, len);
                 if (!priv->remapped_bar[bar])
                         return -ENOMEM;
 
@@ -270,7 +270,7 @@ static int pci_plx9050_init(struct pci_dev *dev)
         /*
          * enable/disable interrupts
          */
-        p = ioremap(pci_resource_start(dev, 0), 0x80);
+        p = ioremap_nocache(pci_resource_start(dev, 0), 0x80);
         if (p == NULL)
                 return -ENOMEM;
         writel(irq_config, p + 0x4c);
@@ -294,7 +294,7 @@ static void __devexit pci_plx9050_exit(struct pci_dev *dev)
         /*
          * disable interrupts
          */
-        p = ioremap(pci_resource_start(dev, 0), 0x80);
+        p = ioremap_nocache(pci_resource_start(dev, 0), 0x80);
         if (p != NULL) {
                 writel(0, p + 0x4c);
 
@@ -341,7 +341,8 @@ static int sbs_init(struct pci_dev *dev)
 {
         u8 __iomem *p;
 
-        p = ioremap(pci_resource_start(dev, 0), pci_resource_len(dev, 0));
+        p = ioremap_nocache(pci_resource_start(dev, 0),
+                                                pci_resource_len(dev, 0));
 
         if (p == NULL)
                 return -ENOMEM;
@@ -365,7 +366,8 @@ static void __devexit sbs_exit(struct pci_dev *dev)
 {
         u8 __iomem *p;
 
-        p = ioremap(pci_resource_start(dev, 0), pci_resource_len(dev, 0));
+        p = ioremap_nocache(pci_resource_start(dev, 0),
+                                        pci_resource_len(dev, 0));
         /* FIXME: What if resource_len < OCT_REG_CR_OFF */
         if (p != NULL)
                 writeb(0, p + OCT_REG_CR_OFF);
@@ -419,7 +421,7 @@ static int pci_siig10x_init(struct pci_dev *dev)
                 break;
         }
 
-        p = ioremap(pci_resource_start(dev, 0), 0x80);
+        p = ioremap_nocache(pci_resource_start(dev, 0), 0x80);
         if (p == NULL)
                 return -ENOMEM;
 
diff --git a/drivers/serial/jsm/jsm.h b/drivers/serial/jsm/jsm.h
index 12c934a1f274..8871aaa3dba6 100644
--- a/drivers/serial/jsm/jsm.h
+++ b/drivers/serial/jsm/jsm.h
@@ -373,6 +373,7 @@ struct neo_uart_struct {
 #define PCI_DEVICE_NEO_2DB9PRI_PCI_NAME         "Neo 2 - DB9 Universal PCI - Powered Ring Indicator"
 #define PCI_DEVICE_NEO_2RJ45_PCI_NAME           "Neo 2 - RJ45 Universal PCI"
 #define PCI_DEVICE_NEO_2RJ45PRI_PCI_NAME        "Neo 2 - RJ45 Universal PCI - Powered Ring Indicator"
+#define PCIE_DEVICE_NEO_IBM_PCI_NAME            "Neo 4 - PCI Express - IBM"
 
 /*
  * Our Global Variables.
diff --git a/drivers/serial/jsm/jsm_driver.c b/drivers/serial/jsm/jsm_driver.c
index 6767ee381cd1..338cf8a08b43 100644
--- a/drivers/serial/jsm/jsm_driver.c
+++ b/drivers/serial/jsm/jsm_driver.c
@@ -82,7 +82,10 @@ static int jsm_probe_one(struct pci_dev *pdev, const struct pci_device_id *ent)
         /* store the info for the board we've found */
         brd->boardnum = adapter_count++;
         brd->pci_dev = pdev;
-        brd->maxports = 2;
+        if (pdev->device == PCIE_DEVICE_ID_NEO_4_IBM)
+                brd->maxports = 4;
+        else
+                brd->maxports = 2;
 
         spin_lock_init(&brd->bd_lock);
         spin_lock_init(&brd->bd_intr_lock);
@@ -208,6 +211,7 @@ static struct pci_device_id jsm_pci_tbl[] = {
         { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2DB9PRI), 0, 0, 1 },
         { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2RJ45), 0, 0, 2 },
         { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2RJ45PRI), 0, 0, 3 },
+        { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCIE_DEVICE_ID_NEO_4_IBM), 0, 0, 4 },
         { 0, }
 };
 MODULE_DEVICE_TABLE(pci, jsm_pci_tbl);
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index 7a3625f52a03..efc971d9647b 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -783,7 +783,9 @@ mpc52xx_uart_int_rx_chars(struct uart_port *port)
                 }
         }
 
+        spin_unlock(&port->lock);
         tty_flip_buffer_push(tty);
+        spin_lock(&port->lock);
 
         return psc_ops->raw_rx_rdy(port);
 }
diff --git a/drivers/serial/sunhv.c b/drivers/serial/sunhv.c
index be0fe152891b..145c0281495d 100644
--- a/drivers/serial/sunhv.c
+++ b/drivers/serial/sunhv.c
@@ -392,7 +392,7 @@ static struct uart_ops sunhv_pops = {
 
 static struct uart_driver sunhv_reg = {
         .owner                  = THIS_MODULE,
-        .driver_name            = "serial",
+        .driver_name            = "sunhv",
         .dev_name               = "ttyS",
         .major                  = TTY_MAJOR,
 };
diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c
index 543f93741e6f..9ff5b38f3bee 100644
--- a/drivers/serial/sunsab.c
+++ b/drivers/serial/sunsab.c
@@ -826,7 +826,7 @@ static struct uart_ops sunsab_pops = {
 
 static struct uart_driver sunsab_reg = {
         .owner                  = THIS_MODULE,
-        .driver_name            = "serial",
+        .driver_name            = "sunsab",
         .dev_name               = "ttyS",
         .major                  = TTY_MAJOR,
 };
diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c
index 4e2302d43ab1..03806a935209 100644
--- a/drivers/serial/sunsu.c
+++ b/drivers/serial/sunsu.c
@@ -1173,7 +1173,7 @@ out:
 
 static struct uart_driver sunsu_reg = {
         .owner                  = THIS_MODULE,
-        .driver_name            = "serial",
+        .driver_name            = "sunsu",
         .dev_name               = "ttyS",
         .major                  = TTY_MAJOR,
 };
diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c
index 90a20a152ebf..7e9fa5ef0eb7 100644
--- a/drivers/serial/sunzilog.c
+++ b/drivers/serial/sunzilog.c
@@ -1023,7 +1023,7 @@ static struct uart_sunzilog_port *sunzilog_irq_chain;
 
 static struct uart_driver sunzilog_reg = {
         .owner          =       THIS_MODULE,
-        .driver_name    =       "ttyS",
+        .driver_name    =       "sunzilog",
         .dev_name       =       "ttyS",
         .major          =       TTY_MAJOR,
 };
diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c
index a9ac1fdb3094..7fea3cf4588a 100644
--- a/drivers/spi/spi_bfin5xx.c
+++ b/drivers/spi/spi_bfin5xx.c
@@ -608,6 +608,7 @@ static void pump_transfers(unsigned long data)
         u8 width;
         u16 cr, dma_width, dma_config;
         u32 tranf_success = 1;
+        u8 full_duplex = 0;
 
         /* Get current state information */
         message = drv_data->cur_msg;
@@ -658,6 +659,7 @@ static void pump_transfers(unsigned long data)
         }
 
         if (transfer->rx_buf != NULL) {
+                full_duplex = transfer->tx_buf != NULL;
                 drv_data->rx = transfer->rx_buf;
                 drv_data->rx_end = drv_data->rx + transfer->len;
                 dev_dbg(&drv_data->pdev->dev, "rx_buf is %p, rx_end is %p\n",
@@ -740,7 +742,8 @@ static void pump_transfers(unsigned long data)
          * successful use different way to r/w according to
          * drv_data->cur_chip->enable_dma
          */
-        if (drv_data->cur_chip->enable_dma && drv_data->len > 6) {
+        if (!full_duplex && drv_data->cur_chip->enable_dma
+                                && drv_data->len > 6) {
 
                 disable_dma(drv_data->dma_channel);
                 clear_dma_irqstat(drv_data->dma_channel);
@@ -828,7 +831,7 @@ static void pump_transfers(unsigned long data)
                 /* IO mode write then read */
                 dev_dbg(&drv_data->pdev->dev, "doing IO transfer\n");
 
-                if (drv_data->tx != NULL && drv_data->rx != NULL) {
+                if (full_duplex) {
                         /* full duplex mode */
                         BUG_ON((drv_data->tx_end - drv_data->tx) !=
                                (drv_data->rx_end - drv_data->rx));
diff --git a/drivers/spi/spi_s3c24xx.c b/drivers/spi/spi_s3c24xx.c
index 34bfb7dd7764..0885cc357a37 100644
--- a/drivers/spi/spi_s3c24xx.c
+++ b/drivers/spi/spi_s3c24xx.c
@@ -125,10 +125,10 @@ static int s3c24xx_spi_setupxfer(struct spi_device *spi,
         /* is clk = pclk / (2 * (pre+1)), or is it
          *    clk = (pclk * 2) / ( pre + 1) */
 
-        div = (div / 2) - 1;
+        div /= 2;
 
-        if (div < 0)
-                div = 1;
+        if (div > 0)
+                div -= 1;
 
         if (div > 255)
                 div = 255;
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index 516a6400db43..a419c42e880e 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -17,6 +17,8 @@ obj-$(CONFIG_USB_SL811_HCD)	+= host/
 obj-$(CONFIG_USB_U132_HCD)      += host/
 obj-$(CONFIG_USB_R8A66597_HCD)  += host/
 
+obj-$(CONFIG_USB_C67X00_HCD)    += c67x00/
+
 obj-$(CONFIG_USB_ACM)           += class/
 obj-$(CONFIG_USB_PRINTER)       += class/
 
diff --git a/drivers/usb/atm/Kconfig b/drivers/usb/atm/Kconfig
index 86e64035edb0..be0b8daac9c7 100644
--- a/drivers/usb/atm/Kconfig
+++ b/drivers/usb/atm/Kconfig
@@ -19,7 +19,6 @@ if USB_ATM
 
 config USB_SPEEDTOUCH
         tristate "Speedtouch USB support"
-        depends on USB_ATM
         select FW_LOADER
         help
           Say Y here if you have an SpeedTouch USB or SpeedTouch 330
@@ -32,7 +31,6 @@ config USB_SPEEDTOUCH
 
 config USB_CXACRU
         tristate "Conexant AccessRunner USB support"
-        depends on USB_ATM
         select FW_LOADER
         help
           Say Y here if you have an ADSL USB modem based on the Conexant
@@ -45,7 +43,6 @@ config USB_CXACRU
 
 config USB_UEAGLEATM
         tristate "ADI 930 and eagle USB DSL modem"
-        depends on USB_ATM
         select FW_LOADER
         help
           Say Y here if you have an ADSL USB modem based on the ADI 930
@@ -58,7 +55,6 @@ config USB_UEAGLEATM
 
 config USB_XUSBATM
         tristate "Other USB DSL modem support"
-        depends on USB_ATM
         help
           Say Y here if you have a DSL USB modem not explicitly supported by
           another USB DSL drivers.  In order to use your modem you will need to
diff --git a/drivers/usb/c67x00/Makefile b/drivers/usb/c67x00/Makefile
new file mode 100644
index 000000000000..868bc41b5980
--- /dev/null
+++ b/drivers/usb/c67x00/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for Cypress C67X00 USB Controller
+#
+
+ccflags-$(CONFIG_USB_DEBUG)             += -DDEBUG
+
+obj-$(CONFIG_USB_C67X00_HCD)            += c67x00.o
+
+c67x00-objs := c67x00-drv.o c67x00-ll-hpi.o c67x00-hcd.o c67x00-sched.o
diff --git a/drivers/usb/c67x00/c67x00-drv.c b/drivers/usb/c67x00/c67x00-drv.c
new file mode 100644
index 000000000000..5633bc5c8bf2
--- /dev/null
+++ b/drivers/usb/c67x00/c67x00-drv.c
@@ -0,0 +1,243 @@
+/*
+ * c67x00-drv.c: Cypress C67X00 USB Common infrastructure
+ *
+ * Copyright (C) 2006-2008 Barco N.V.
+ *    Derived from the Cypress cy7c67200/300 ezusb linux driver and
+ *    based on multiple host controller drivers inside the linux kernel.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA  02110-1301  USA.
+ */
+
+/*
+ * This file implements the common infrastructure for using the c67x00.
+ * It is both the link between the platform configuration and subdrivers and
+ * the link between the common hardware parts and the subdrivers (e.g.
+ * interrupt handling).
+ *
+ * The c67x00 has 2 SIE's (serial interface engine) wich can be configured
+ * to be host, device or OTG (with some limitations, E.G. only SIE1 can be OTG).
+ *
+ * Depending on the platform configuration, the SIE's are created and
+ * the corresponding subdriver is initialized (c67x00_probe_sie).
+ */
+
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/list.h>
+#include <linux/usb.h>
+#include <linux/usb/c67x00.h>
+
+#include "c67x00.h"
+#include "c67x00-hcd.h"
+
+static void c67x00_probe_sie(struct c67x00_sie *sie,
+                             struct c67x00_device *dev, int sie_num)
+{
+        spin_lock_init(&sie->lock);
+        sie->dev = dev;
+        sie->sie_num = sie_num;
+        sie->mode = c67x00_sie_config(dev->pdata->sie_config, sie_num);
+
+        switch (sie->mode) {
+        case C67X00_SIE_HOST:
+                c67x00_hcd_probe(sie);
+                break;
+
+        case C67X00_SIE_UNUSED:
+                dev_info(sie_dev(sie),
+                         "Not using SIE %d as requested\n", sie->sie_num);
+                break;
+
+        default:
+                dev_err(sie_dev(sie),
+                        "Unsupported configuration: 0x%x for SIE %d\n",
+                        sie->mode, sie->sie_num);
+                break;
+        }
+}
+
+static void c67x00_remove_sie(struct c67x00_sie *sie)
+{
+        switch (sie->mode) {
+        case C67X00_SIE_HOST:
+                c67x00_hcd_remove(sie);
+                break;
+
+        default:
+                break;
+        }
+}
+
+static irqreturn_t c67x00_irq(int irq, void *__dev)
+{
+        struct c67x00_device *c67x00 = __dev;
+        struct c67x00_sie *sie;
+        u16 msg, int_status;
+        int i, count = 8;
+
+        int_status = c67x00_ll_hpi_status(c67x00);
+        if (!int_status)
+                return IRQ_NONE;
+
+        while (int_status != 0 && (count-- >= 0)) {
+                c67x00_ll_irq(c67x00, int_status);
+                for (i = 0; i < C67X00_SIES; i++) {
+                        sie = &c67x00->sie[i];
+                        msg = 0;
+                        if (int_status & SIEMSG_FLG(i))
+                                msg = c67x00_ll_fetch_siemsg(c67x00, i);
+                        if (sie->irq)
+                                sie->irq(sie, int_status, msg);
+                }
+                int_status = c67x00_ll_hpi_status(c67x00);
+        }
+
+        if (int_status)
+                dev_warn(&c67x00->pdev->dev, "Not all interrupts handled! "
+                         "status = 0x%04x\n", int_status);
+
+        return IRQ_HANDLED;
+}
+
+/* ------------------------------------------------------------------------- */
+
+static int __devinit c67x00_drv_probe(struct platform_device *pdev)
+{
+        struct c67x00_device *c67x00;
+        struct c67x00_platform_data *pdata;
+        struct resource *res, *res2;
+        int ret, i;
+
+        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+        if (!res)
+                return -ENODEV;
+
+        res2 = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+        if (!res2)
+                return -ENODEV;
+
+        pdata = pdev->dev.platform_data;
+        if (!pdata)
+                return -ENODEV;
+
+        c67x00 = kzalloc(sizeof(*c67x00), GFP_KERNEL);
+        if (!c67x00)
+                return -ENOMEM;
+
+        if (!request_mem_region(res->start, res->end - res->start + 1,
+                                pdev->name)) {
+                dev_err(&pdev->dev, "Memory region busy\n");
+                ret = -EBUSY;
+                goto request_mem_failed;
+        }
+        c67x00->hpi.base = ioremap(res->start, res->end - res->start + 1);
+        if (!c67x00->hpi.base) {
+                dev_err(&pdev->dev, "Unable to map HPI registers\n");
+                ret = -EIO;
+                goto map_failed;
+        }
+
+        spin_lock_init(&c67x00->hpi.lock);
+        c67x00->hpi.regstep = pdata->hpi_regstep;
+        c67x00->pdata = pdev->dev.platform_data;
+        c67x00->pdev = pdev;
+
+        c67x00_ll_init(c67x00);
+        c67x00_ll_hpi_reg_init(c67x00);
+
+        ret = request_irq(res2->start, c67x00_irq, 0, pdev->name, c67x00);
+        if (ret) {
+                dev_err(&pdev->dev, "Cannot claim IRQ\n");
+                goto request_irq_failed;
+        }
+
+        ret = c67x00_ll_reset(c67x00);
+        if (ret) {
+                dev_err(&pdev->dev, "Device reset failed\n");
+                goto reset_failed;
+        }
+
+        for (i = 0; i < C67X00_SIES; i++)
+                c67x00_probe_sie(&c67x00->sie[i], c67x00, i);
+
+        platform_set_drvdata(pdev, c67x00);
+
+        return 0;
+
+ reset_failed:
+        free_irq(res2->start, c67x00);
+ request_irq_failed:
+        iounmap(c67x00->hpi.base);
+ map_failed:
+        release_mem_region(res->start, res->end - res->start + 1);
+ request_mem_failed:
+        kfree(c67x00);
+
+        return ret;
+}
+
+static int __devexit c67x00_drv_remove(struct platform_device *pdev)
+{
+        struct c67x00_device *c67x00 = platform_get_drvdata(pdev);
+        struct resource *res;
+        int i;
+
+        for (i = 0; i < C67X00_SIES; i++)
+                c67x00_remove_sie(&c67x00->sie[i]);
+
+        c67x00_ll_release(c67x00);
+
+        res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+        if (res)
+                free_irq(res->start, c67x00);
+
+        iounmap(c67x00->hpi.base);
+
+        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+        if (res)
+                release_mem_region(res->start, res->end - res->start + 1);
+
+        kfree(c67x00);
+
+        return 0;
+}
+
+static struct platform_driver c67x00_driver = {
+        .probe  = c67x00_drv_probe,
+        .remove = __devexit_p(c67x00_drv_remove),
+        .driver = {
+                .owner = THIS_MODULE,
+                .name = "c67x00",
+        },
+};
+MODULE_ALIAS("platform:c67x00");
+
+static int __init c67x00_init(void)
+{
+        return platform_driver_register(&c67x00_driver);
+}
+
+static void __exit c67x00_exit(void)
+{
+        platform_driver_unregister(&c67x00_driver);
+}
+
+module_init(c67x00_init);
+module_exit(c67x00_exit);
+
+MODULE_AUTHOR("Peter Korsgaard, Jan Veldeman, Grant Likely");
+MODULE_DESCRIPTION("Cypress C67X00 USB Controller Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/c67x00/c67x00-hcd.c b/drivers/usb/c67x00/c67x00-hcd.c
new file mode 100644
index 000000000000..a22b887f4e9e
--- /dev/null
+++ b/drivers/usb/c67x00/c67x00-hcd.c
@@ -0,0 +1,412 @@
+/*
+ * c67x00-hcd.c: Cypress C67X00 USB Host Controller Driver
+ *
+ * Copyright (C) 2006-2008 Barco N.V.
+ *    Derived from the Cypress cy7c67200/300 ezusb linux driver and
+ *    based on multiple host controller drivers inside the linux kernel.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA  02110-1301  USA.
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/usb.h>
+
+#include "c67x00.h"
+#include "c67x00-hcd.h"
+
+/* --------------------------------------------------------------------------
+ * Root Hub Support
+ */
+
+static __u8 c67x00_hub_des[] = {
+        0x09,                   /*  __u8  bLength; */
+        0x29,                   /*  __u8  bDescriptorType; Hub-descriptor */
+        0x02,                   /*  __u8  bNbrPorts; */
+        0x00,                   /* __u16  wHubCharacteristics; */
+        0x00,                   /*   (per-port OC, no power switching) */
+        0x32,                   /*  __u8  bPwrOn2pwrGood; 2ms */
+        0x00,                   /*  __u8  bHubContrCurrent; 0 mA */
+        0x00,                   /*  __u8  DeviceRemovable; ** 7 Ports max ** */
+        0xff,                   /*  __u8  PortPwrCtrlMask; ** 7 ports max ** */
+};
+
+static void c67x00_hub_reset_host_port(struct c67x00_sie *sie, int port)
+{
+        struct c67x00_hcd *c67x00 = sie->private_data;
+        unsigned long flags;
+
+        c67x00_ll_husb_reset(sie, port);
+
+        spin_lock_irqsave(&c67x00->lock, flags);
+        c67x00_ll_husb_reset_port(sie, port);
+        spin_unlock_irqrestore(&c67x00->lock, flags);
+
+        c67x00_ll_set_husb_eot(sie->dev, DEFAULT_EOT);
+}
+
+static int c67x00_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+        struct c67x00_hcd *c67x00 = hcd_to_c67x00_hcd(hcd);
+        struct c67x00_sie *sie = c67x00->sie;
+        u16 status;
+        int i;
+
+        *buf = 0;
+        status = c67x00_ll_usb_get_status(sie);
+        for (i = 0; i < C67X00_PORTS; i++)
+                if (status & PORT_CONNECT_CHANGE(i))
+                        *buf |= (1 << i);
+
+        /* bit 0 denotes hub change, b1..n port change */
+        *buf <<= 1;
+
+        return !!*buf;
+}
+
+static int c67x00_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
+                              u16 wIndex, char *buf, u16 wLength)
+{
+        struct c67x00_hcd *c67x00 = hcd_to_c67x00_hcd(hcd);
+        struct c67x00_sie *sie = c67x00->sie;
+        u16 status, usb_status;
+        int len = 0;
+        unsigned int port = wIndex-1;
+        u16 wPortChange, wPortStatus;
+
+        switch (typeReq) {
+
+        case GetHubStatus:
+                *(__le32 *) buf = cpu_to_le32(0);
+                len = 4;                /* hub power */
+                break;
+
+        case GetPortStatus:
+                if (wIndex > C67X00_PORTS)
+                        return -EPIPE;
+
+                status = c67x00_ll_usb_get_status(sie);
+                usb_status = c67x00_ll_get_usb_ctl(sie);
+
+                wPortChange = 0;
+                if (status & PORT_CONNECT_CHANGE(port))
+                        wPortChange |= USB_PORT_STAT_C_CONNECTION;
+
+                wPortStatus = USB_PORT_STAT_POWER;
+                if (!(status & PORT_SE0_STATUS(port)))
+                        wPortStatus |= USB_PORT_STAT_CONNECTION;
+                if (usb_status & LOW_SPEED_PORT(port)) {
+                        wPortStatus |= USB_PORT_STAT_LOW_SPEED;
+                        c67x00->low_speed_ports |= (1 << port);
+                } else
+                        c67x00->low_speed_ports &= ~(1 << port);
+
+                if (usb_status & SOF_EOP_EN(port))
+                        wPortStatus |= USB_PORT_STAT_ENABLE;
+
+                *(__le16 *) buf = cpu_to_le16(wPortStatus);
+                *(__le16 *) (buf + 2) = cpu_to_le16(wPortChange);
+                len = 4;
+                break;
+
+        case SetHubFeature:     /* We don't implement these */
+        case ClearHubFeature:
+                switch (wValue) {
+                case C_HUB_OVER_CURRENT:
+                case C_HUB_LOCAL_POWER:
+                        len = 0;
+                        break;
+
+                default:
+                        return -EPIPE;
+                }
+                break;
+
+        case SetPortFeature:
+                if (wIndex > C67X00_PORTS)
+                        return -EPIPE;
+
+                switch (wValue) {
+                case USB_PORT_FEAT_SUSPEND:
+                        dev_dbg(c67x00_hcd_dev(c67x00),
+                                "SetPortFeature %d (SUSPEND)\n", port);
+                        len = 0;
+                        break;
+
+                case USB_PORT_FEAT_RESET:
+                        c67x00_hub_reset_host_port(sie, port);
+                        len = 0;
+                        break;
+
+                case USB_PORT_FEAT_POWER:
+                        /* Power always enabled */
+                        len = 0;
+                        break;
+
+                default:
+                        dev_dbg(c67x00_hcd_dev(c67x00),
+                                "%s: SetPortFeature %d (0x%04x) Error!\n",
+                                __func__, port, wValue);
+                        return -EPIPE;
+                }
+                break;
+
+        case ClearPortFeature:
+                if (wIndex > C67X00_PORTS)
+                        return -EPIPE;
+
+                switch (wValue) {
+                case USB_PORT_FEAT_ENABLE:
+                        /* Reset the port so that the c67x00 also notices the
+                         * disconnect */
+                        c67x00_hub_reset_host_port(sie, port);
+                        len = 0;
+                        break;
+
+                case USB_PORT_FEAT_C_ENABLE:
+                        dev_dbg(c67x00_hcd_dev(c67x00),
+                                "ClearPortFeature (%d): C_ENABLE\n", port);
+                        len = 0;
+                        break;
+
+                case USB_PORT_FEAT_SUSPEND:
+                        dev_dbg(c67x00_hcd_dev(c67x00),
+                                "ClearPortFeature (%d): SUSPEND\n", port);
+                        len = 0;
+                        break;
+
+                case USB_PORT_FEAT_C_SUSPEND:
+                        dev_dbg(c67x00_hcd_dev(c67x00),
+                                "ClearPortFeature (%d): C_SUSPEND\n", port);
+                        len = 0;
+                        break;
+
+                case USB_PORT_FEAT_POWER:
+                        dev_dbg(c67x00_hcd_dev(c67x00),
+                                "ClearPortFeature (%d): POWER\n", port);
+                        return -EPIPE;
+
+                case USB_PORT_FEAT_C_CONNECTION:
+                        c67x00_ll_usb_clear_status(sie,
+                                                   PORT_CONNECT_CHANGE(port));
+                        len = 0;
+                        break;
+
+                case USB_PORT_FEAT_C_OVER_CURRENT:
+                        dev_dbg(c67x00_hcd_dev(c67x00),
+                                "ClearPortFeature (%d): OVER_CURRENT\n", port);
+                        len = 0;
+                        break;
+
+                case USB_PORT_FEAT_C_RESET:
+                        dev_dbg(c67x00_hcd_dev(c67x00),
+                                "ClearPortFeature (%d): C_RESET\n", port);
+                        len = 0;
+                        break;
+
+                default:
+                        dev_dbg(c67x00_hcd_dev(c67x00),
+                                "%s: ClearPortFeature %d (0x%04x) Error!\n",
+                                __func__, port, wValue);
+                        return -EPIPE;
+                }
+                break;
+
+        case GetHubDescriptor:
+                len = min_t(unsigned int, sizeof(c67x00_hub_des), wLength);
+                memcpy(buf, c67x00_hub_des, len);
+                break;
+
+        default:
+                dev_dbg(c67x00_hcd_dev(c67x00), "%s: unknown\n", __func__);
+                return -EPIPE;
+        }
+
+        return 0;
+}
+
+/* ---------------------------------------------------------------------
+ * Main part of host controller driver
+ */
+
+/**
+ * c67x00_hcd_irq
+ *
+ * This function is called from the interrupt handler in c67x00-drv.c
+ */
+static void c67x00_hcd_irq(struct c67x00_sie *sie, u16 int_status, u16 msg)
+{
+        struct c67x00_hcd *c67x00 = sie->private_data;
+        struct usb_hcd *hcd = c67x00_hcd_to_hcd(c67x00);
+
+        /* Handle sie message flags */
+        if (msg) {
+                if (msg & HUSB_TDListDone)
+                        c67x00_sched_kick(c67x00);
+                else
+                        dev_warn(c67x00_hcd_dev(c67x00),
+                                 "Unknown SIE msg flag(s): 0x%04x\n", msg);
+        }
+
+        if (unlikely(hcd->state == HC_STATE_HALT))
+                return;
+
+        if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))
+                return;
+
+        /* Handle Start of frame events */
+        if (int_status & SOFEOP_FLG(sie->sie_num)) {
+                c67x00_ll_usb_clear_status(sie, SOF_EOP_IRQ_FLG);
+                c67x00_sched_kick(c67x00);
+                set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
+        }
+}
+
+/**
+ * c67x00_hcd_start: Host controller start hook
+ */
+static int c67x00_hcd_start(struct usb_hcd *hcd)
+{
+        hcd->uses_new_polling = 1;
+        hcd->state = HC_STATE_RUNNING;
+        hcd->poll_rh = 1;
+
+        return 0;
+}
+
+/**
+ * c67x00_hcd_stop: Host controller stop hook
+ */
+static void c67x00_hcd_stop(struct usb_hcd *hcd)
+{
+        /* Nothing to do */
+}
+
+static int c67x00_hcd_get_frame(struct usb_hcd *hcd)
+{
+        struct c67x00_hcd *c67x00 = hcd_to_c67x00_hcd(hcd);
+        u16 temp_val;
+
+        dev_dbg(c67x00_hcd_dev(c67x00), "%s\n", __func__);
+        temp_val = c67x00_ll_husb_get_frame(c67x00->sie);
+        temp_val &= HOST_FRAME_MASK;
+        return temp_val ? (temp_val - 1) : HOST_FRAME_MASK;
+}
+
+static struct hc_driver c67x00_hc_driver = {
+        .description    = "c67x00-hcd",
+        .product_desc   = "Cypress C67X00 Host Controller",
+        .hcd_priv_size  = sizeof(struct c67x00_hcd),
+        .flags          = HCD_USB11 | HCD_MEMORY,
+
+        /*
+         * basic lifecycle operations
+         */
+        .start          = c67x00_hcd_start,
+        .stop           = c67x00_hcd_stop,
+
+        /*
+         * managing i/o requests and associated device resources
+         */
+        .urb_enqueue    = c67x00_urb_enqueue,
+        .urb_dequeue    = c67x00_urb_dequeue,
+        .endpoint_disable = c67x00_endpoint_disable,
+
+        /*
+         * scheduling support
+         */
+        .get_frame_number = c67x00_hcd_get_frame,
+
+        /*
+         * root hub support
+         */
+        .hub_status_data = c67x00_hub_status_data,
+        .hub_control    = c67x00_hub_control,
+};
+
+/* ---------------------------------------------------------------------
+ * Setup/Teardown routines
+ */
+
+int c67x00_hcd_probe(struct c67x00_sie *sie)
+{
+        struct c67x00_hcd *c67x00;
+        struct usb_hcd *hcd;
+        unsigned long flags;
+        int retval;
+
+        if (usb_disabled())
+                return -ENODEV;
+
+        hcd = usb_create_hcd(&c67x00_hc_driver, sie_dev(sie), "c67x00_sie");
+        if (!hcd) {
+                retval = -ENOMEM;
+                goto err0;
+        }
+        c67x00 = hcd_to_c67x00_hcd(hcd);
+
+        spin_lock_init(&c67x00->lock);
+        c67x00->sie = sie;
+
+        INIT_LIST_HEAD(&c67x00->list[PIPE_ISOCHRONOUS]);
+        INIT_LIST_HEAD(&c67x00->list[PIPE_INTERRUPT]);
+        INIT_LIST_HEAD(&c67x00->list[PIPE_CONTROL]);
+        INIT_LIST_HEAD(&c67x00->list[PIPE_BULK]);
+        c67x00->urb_count = 0;
+        INIT_LIST_HEAD(&c67x00->td_list);
+        c67x00->td_base_addr = CY_HCD_BUF_ADDR + SIE_TD_OFFSET(sie->sie_num);
+        c67x00->buf_base_addr = CY_HCD_BUF_ADDR + SIE_BUF_OFFSET(sie->sie_num);
+        c67x00->max_frame_bw = MAX_FRAME_BW_STD;
+
+        c67x00_ll_husb_init_host_port(sie);
+
+        init_completion(&c67x00->endpoint_disable);
+        retval = c67x00_sched_start_scheduler(c67x00);
+        if (retval)
+                goto err1;
+
+        retval = usb_add_hcd(hcd, 0, 0);
+        if (retval) {
+                dev_dbg(sie_dev(sie), "%s: usb_add_hcd returned %d\n",
+                        __func__, retval);
+                goto err2;
+        }
+
+        spin_lock_irqsave(&sie->lock, flags);
+        sie->private_data = c67x00;
+        sie->irq = c67x00_hcd_irq;
+        spin_unlock_irqrestore(&sie->lock, flags);
+
+        return retval;
+
+ err2:
+        c67x00_sched_stop_scheduler(c67x00);
+ err1:
+        usb_put_hcd(hcd);
+ err0:
+        return retval;
+}
+
+/* may be called with controller, bus, and devices active */
+void c67x00_hcd_remove(struct c67x00_sie *sie)
+{
+        struct c67x00_hcd *c67x00 = sie->private_data;
+        struct usb_hcd *hcd = c67x00_hcd_to_hcd(c67x00);
+
+        c67x00_sched_stop_scheduler(c67x00);
+        usb_remove_hcd(hcd);
+        usb_put_hcd(hcd);
+}
diff --git a/drivers/usb/c67x00/c67x00-hcd.h b/drivers/usb/c67x00/c67x00-hcd.h
new file mode 100644
index 000000000000..e8c6d94b2514
--- /dev/null
+++ b/drivers/usb/c67x00/c67x00-hcd.h
@@ -0,0 +1,133 @@
+/*
+ * c67x00-hcd.h: Cypress C67X00 USB HCD
+ *
+ * Copyright (C) 2006-2008 Barco N.V.
+ *    Derived from the Cypress cy7c67200/300 ezusb linux driver and
+ *    based on multiple host controller drivers inside the linux kernel.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA  02110-1301  USA.
+ */
+
+#ifndef _USB_C67X00_HCD_H
+#define _USB_C67X00_HCD_H
+
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/usb.h>
+#include "../core/hcd.h"
+#include "c67x00.h"
+
+/*
+ * The following parameters depend on the CPU speed, bus speed, ...
+ * These can be tuned for specific use cases, e.g. if isochronous transfers
+ * are very important, bandwith can be sacrificed to guarantee that the
+ * 1ms deadline will be met.
+ * If bulk transfers are important, the MAX_FRAME_BW can be increased,
+ * but some (or many) isochronous deadlines might not be met.
+ *
+ * The values are specified in bittime.
+ */
+
+/*
+ * The current implementation switches between _STD (default) and _ISO (when
+ * isochronous transfers are scheduled), in order to optimize the throughput
+ * in normal cicrumstances, but also provide good isochronous behaviour.
+ *
+ * Bandwidth is described in bit time so with a 12MHz USB clock and 1ms
+ * frames; there are 12000 bit times per frame.
+ */
+
+#define TOTAL_FRAME_BW          12000
+#define DEFAULT_EOT             2250
+
+#define MAX_FRAME_BW_STD        (TOTAL_FRAME_BW - DEFAULT_EOT)
+#define MAX_FRAME_BW_ISO        2400
+
+/*
+ * Periodic transfers may only use 90% of the full frame, but as
+ * we currently don't even use 90% of the full frame, we may
+ * use the full usable time for periodic transfers.
+ */
+#define MAX_PERIODIC_BW(full_bw)        full_bw
+
+/* -------------------------------------------------------------------------- */
+
+struct c67x00_hcd {
+        spinlock_t lock;
+        struct c67x00_sie *sie;
+        unsigned int low_speed_ports;   /* bitmask of low speed ports */
+        unsigned int urb_count;
+        unsigned int urb_iso_count;
+
+        struct list_head list[4];       /* iso, int, ctrl, bulk */
+#if PIPE_BULK != 3
+#error "Sanity check failed, this code presumes PIPE_... to range from 0 to 3"
+#endif
+
+        /* USB bandwidth allocated to td_list */
+        int bandwidth_allocated;
+        /* USB bandwidth allocated for isoc/int transfer */
+        int periodic_bw_allocated;
+        struct list_head td_list;
+        int max_frame_bw;
+
+        u16 td_base_addr;
+        u16 buf_base_addr;
+        u16 next_td_addr;
+        u16 next_buf_addr;
+
+        struct tasklet_struct tasklet;
+
+        struct completion endpoint_disable;
+
+        u16 current_frame;
+        u16 last_frame;
+};
+
+static inline struct c67x00_hcd *hcd_to_c67x00_hcd(struct usb_hcd *hcd)
+{
+        return (struct c67x00_hcd *)(hcd->hcd_priv);
+}
+
+static inline struct usb_hcd *c67x00_hcd_to_hcd(struct c67x00_hcd *c67x00)
+{
+        return container_of((void *)c67x00, struct usb_hcd, hcd_priv);
+}
+
+/* ---------------------------------------------------------------------
+ * Functions used by c67x00-drv
+ */
+
+int c67x00_hcd_probe(struct c67x00_sie *sie);
+void c67x00_hcd_remove(struct c67x00_sie *sie);
+
+/* ---------------------------------------------------------------------
+ * Transfer Descriptor scheduling functions
+ */
+int c67x00_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags);
+int c67x00_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status);
+void c67x00_endpoint_disable(struct usb_hcd *hcd,
+                             struct usb_host_endpoint *ep);
+
+void c67x00_hcd_msg_received(struct c67x00_sie *sie, u16 msg);
+void c67x00_sched_kick(struct c67x00_hcd *c67x00);
+int c67x00_sched_start_scheduler(struct c67x00_hcd *c67x00);
+void c67x00_sched_stop_scheduler(struct c67x00_hcd *c67x00);
+
+#define c67x00_hcd_dev(x)       (c67x00_hcd_to_hcd(x)->self.controller)
+
+#endif                          /* _USB_C67X00_HCD_H */
diff --git a/drivers/usb/c67x00/c67x00-ll-hpi.c b/drivers/usb/c67x00/c67x00-ll-hpi.c
new file mode 100644
index 000000000000..f3430b372f09
--- /dev/null
+++ b/drivers/usb/c67x00/c67x00-ll-hpi.c
@@ -0,0 +1,480 @@
+/*
+ * c67x00-ll-hpi.c: Cypress C67X00 USB Low level interface using HPI
+ *
+ * Copyright (C) 2006-2008 Barco N.V.
+ *    Derived from the Cypress cy7c67200/300 ezusb linux driver and
+ *    based on multiple host controller drivers inside the linux kernel.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA  02110-1301  USA.
+ */
+
+#include <asm/byteorder.h>
+#include <linux/io.h>
+#include <linux/usb/c67x00.h>
+#include "c67x00.h"
+
+#define COMM_REGS 14
+
+struct c67x00_lcp_int_data {
+        u16 regs[COMM_REGS];
+};
+
+/* -------------------------------------------------------------------------- */
+/* Interface definitions */
+
+#define COMM_ACK                        0x0FED
+#define COMM_NAK                        0xDEAD
+
+#define COMM_RESET                      0xFA50
+#define COMM_EXEC_INT                   0xCE01
+#define COMM_INT_NUM                    0x01C2
+
+/* Registers 0 to COMM_REGS-1 */
+#define COMM_R(x)                       (0x01C4 + 2 * (x))
+
+#define HUSB_SIE_pCurrentTDPtr(x)       ((x) ? 0x01B2 : 0x01B0)
+#define HUSB_SIE_pTDListDone_Sem(x)     ((x) ? 0x01B8 : 0x01B6)
+#define HUSB_pEOT                       0x01B4
+
+/* Software interrupts */
+/* 114, 115: */
+#define HUSB_SIE_INIT_INT(x)            ((x) ? 0x0073 : 0x0072)
+#define HUSB_RESET_INT                  0x0074
+
+#define SUSB_INIT_INT                   0x0071
+#define SUSB_INIT_INT_LOC               (SUSB_INIT_INT * 2)
+
+/* -----------------------------------------------------------------------
+ * HPI implementation
+ *
+ * The c67x00 chip also support control via SPI or HSS serial
+ * interfaces.  However, this driver assumes that register access can
+ * be performed from IRQ context.  While this is a safe assuption with
+ * the HPI interface, it is not true for the serial interfaces.
+ */
+
+/* HPI registers */
+#define HPI_DATA        0
+#define HPI_MAILBOX     1
+#define HPI_ADDR        2
+#define HPI_STATUS      3
+
+static inline u16 hpi_read_reg(struct c67x00_device *dev, int reg)
+{
+        return __raw_readw(dev->hpi.base + reg * dev->hpi.regstep);
+}
+
+static inline void hpi_write_reg(struct c67x00_device *dev, int reg, u16 value)
+{
+        __raw_writew(value, dev->hpi.base + reg * dev->hpi.regstep);
+}
+
+static inline u16 hpi_read_word_nolock(struct c67x00_device *dev, u16 reg)
+{
+        hpi_write_reg(dev, HPI_ADDR, reg);
+        return hpi_read_reg(dev, HPI_DATA);
+}
+
+static u16 hpi_read_word(struct c67x00_device *dev, u16 reg)
+{
+        u16 value;
+        unsigned long flags;
+
+        spin_lock_irqsave(&dev->hpi.lock, flags);
+        value = hpi_read_word_nolock(dev, reg);
+        spin_unlock_irqrestore(&dev->hpi.lock, flags);
+
+        return value;
+}
+
+static void hpi_write_word_nolock(struct c67x00_device *dev, u16 reg, u16 value)
+{
+        hpi_write_reg(dev, HPI_ADDR, reg);
+        hpi_write_reg(dev, HPI_DATA, value);
+}
+
+static void hpi_write_word(struct c67x00_device *dev, u16 reg, u16 value)
+{
+        unsigned long flags;
+
+        spin_lock_irqsave(&dev->hpi.lock, flags);
+        hpi_write_word_nolock(dev, reg, value);
+        spin_unlock_irqrestore(&dev->hpi.lock, flags);
+}
+
+/*
+ * Only data is little endian, addr has cpu endianess
+ */
+static void hpi_write_words_le16(struct c67x00_device *dev, u16 addr,
+                                 u16 *data, u16 count)
+{
+        unsigned long flags;
+        int i;
+
+        spin_lock_irqsave(&dev->hpi.lock, flags);
+
+        hpi_write_reg(dev, HPI_ADDR, addr);
+        for (i = 0; i < count; i++)
+                hpi_write_reg(dev, HPI_DATA, cpu_to_le16(*data++));
+
+        spin_unlock_irqrestore(&dev->hpi.lock, flags);
+}
+
+/*
+ * Only data is little endian, addr has cpu endianess
+ */
+static void hpi_read_words_le16(struct c67x00_device *dev, u16 addr,
+                                u16 *data, u16 count)
+{
+        unsigned long flags;
+        int i;
+
+        spin_lock_irqsave(&dev->hpi.lock, flags);
+        hpi_write_reg(dev, HPI_ADDR, addr);
+        for (i = 0; i < count; i++)
+                *data++ = le16_to_cpu(hpi_read_reg(dev, HPI_DATA));
+
+        spin_unlock_irqrestore(&dev->hpi.lock, flags);
+}
+
+static void hpi_set_bits(struct c67x00_device *dev, u16 reg, u16 mask)
+{
+        u16 value;
+        unsigned long flags;
+
+        spin_lock_irqsave(&dev->hpi.lock, flags);
+        value = hpi_read_word_nolock(dev, reg);
+        hpi_write_word_nolock(dev, reg, value | mask);
+        spin_unlock_irqrestore(&dev->hpi.lock, flags);
+}
+
+static void hpi_clear_bits(struct c67x00_device *dev, u16 reg, u16 mask)
+{
+        u16 value;
+        unsigned long flags;
+
+        spin_lock_irqsave(&dev->hpi.lock, flags);
+        value = hpi_read_word_nolock(dev, reg);
+        hpi_write_word_nolock(dev, reg, value & ~mask);
+        spin_unlock_irqrestore(&dev->hpi.lock, flags);
+}
+
+static u16 hpi_recv_mbox(struct c67x00_device *dev)
+{
+        u16 value;
+        unsigned long flags;
+
+        spin_lock_irqsave(&dev->hpi.lock, flags);
+        value = hpi_read_reg(dev, HPI_MAILBOX);
+        spin_unlock_irqrestore(&dev->hpi.lock, flags);
+
+        return value;
+}
+
+static u16 hpi_send_mbox(struct c67x00_device *dev, u16 value)
+{
+        unsigned long flags;
+
+        spin_lock_irqsave(&dev->hpi.lock, flags);
+        hpi_write_reg(dev, HPI_MAILBOX, value);
+        spin_unlock_irqrestore(&dev->hpi.lock, flags);
+
+        return value;
+}
+
+u16 c67x00_ll_hpi_status(struct c67x00_device *dev)
+{
+        u16 value;
+        unsigned long flags;
+
+        spin_lock_irqsave(&dev->hpi.lock, flags);
+        value = hpi_read_reg(dev, HPI_STATUS);
+        spin_unlock_irqrestore(&dev->hpi.lock, flags);
+
+        return value;
+}
+
+void c67x00_ll_hpi_reg_init(struct c67x00_device *dev)
+{
+        int i;
+
+        hpi_recv_mbox(dev);
+        c67x00_ll_hpi_status(dev);
+        hpi_write_word(dev, HPI_IRQ_ROUTING_REG, 0);
+
+        for (i = 0; i < C67X00_SIES; i++) {
+                hpi_write_word(dev, SIEMSG_REG(i), 0);
+                hpi_read_word(dev, SIEMSG_REG(i));
+        }
+}
+
+void c67x00_ll_hpi_enable_sofeop(struct c67x00_sie *sie)
+{
+        hpi_set_bits(sie->dev, HPI_IRQ_ROUTING_REG,
+                     SOFEOP_TO_HPI_EN(sie->sie_num));
+}
+
+void c67x00_ll_hpi_disable_sofeop(struct c67x00_sie *sie)
+{
+        hpi_clear_bits(sie->dev, HPI_IRQ_ROUTING_REG,
+                       SOFEOP_TO_HPI_EN(sie->sie_num));
+}
+
+/* -------------------------------------------------------------------------- */
+/* Transactions */
+
+static inline u16 ll_recv_msg(struct c67x00_device *dev)
+{
+        u16 res;
+
+        res = wait_for_completion_timeout(&dev->hpi.lcp.msg_received, 5 * HZ);
+        WARN_ON(!res);
+
+        return (res == 0) ? -EIO : 0;
+}
+
+/* -------------------------------------------------------------------------- */
+/* General functions */
+
+u16 c67x00_ll_fetch_siemsg(struct c67x00_device *dev, int sie_num)
+{
+        u16 val;
+
+        val = hpi_read_word(dev, SIEMSG_REG(sie_num));
+        /* clear register to allow next message */
+        hpi_write_word(dev, SIEMSG_REG(sie_num), 0);
+
+        return val;
+}
+
+u16 c67x00_ll_get_usb_ctl(struct c67x00_sie *sie)
+{
+        return hpi_read_word(sie->dev, USB_CTL_REG(sie->sie_num));
+}
+
+/**
+ * c67x00_ll_usb_clear_status - clear the USB status bits
+ */
+void c67x00_ll_usb_clear_status(struct c67x00_sie *sie, u16 bits)
+{
+        hpi_write_word(sie->dev, USB_STAT_REG(sie->sie_num), bits);
+}
+
+u16 c67x00_ll_usb_get_status(struct c67x00_sie *sie)
+{
+        return hpi_read_word(sie->dev, USB_STAT_REG(sie->sie_num));
+}
+
+/* -------------------------------------------------------------------------- */
+
+static int c67x00_comm_exec_int(struct c67x00_device *dev, u16 nr,
+                                struct c67x00_lcp_int_data *data)
+{
+        int i, rc;
+
+        mutex_lock(&dev->hpi.lcp.mutex);
+        hpi_write_word(dev, COMM_INT_NUM, nr);
+        for (i = 0; i < COMM_REGS; i++)
+                hpi_write_word(dev, COMM_R(i), data->regs[i]);
+        hpi_send_mbox(dev, COMM_EXEC_INT);
+        rc = ll_recv_msg(dev);
+        mutex_unlock(&dev->hpi.lcp.mutex);
+
+        return rc;
+}
+
+/* -------------------------------------------------------------------------- */
+/* Host specific functions */
+
+void c67x00_ll_set_husb_eot(struct c67x00_device *dev, u16 value)
+{
+        mutex_lock(&dev->hpi.lcp.mutex);
+        hpi_write_word(dev, HUSB_pEOT, value);
+        mutex_unlock(&dev->hpi.lcp.mutex);
+}
+
+static inline void c67x00_ll_husb_sie_init(struct c67x00_sie *sie)
+{
+        struct c67x00_device *dev = sie->dev;
+        struct c67x00_lcp_int_data data;
+        int rc;
+
+        rc = c67x00_comm_exec_int(dev, HUSB_SIE_INIT_INT(sie->sie_num), &data);
+        BUG_ON(rc); /* No return path for error code; crash spectacularly */
+}
+
+void c67x00_ll_husb_reset(struct c67x00_sie *sie, int port)
+{
+        struct c67x00_device *dev = sie->dev;
+        struct c67x00_lcp_int_data data;
+        int rc;
+
+        data.regs[0] = 50;      /* Reset USB port for 50ms */
+        data.regs[1] = port | (sie->sie_num << 1);
+        rc = c67x00_comm_exec_int(dev, HUSB_RESET_INT, &data);
+        BUG_ON(rc); /* No return path for error code; crash spectacularly */
+}
+
+void c67x00_ll_husb_set_current_td(struct c67x00_sie *sie, u16 addr)
+{
+        hpi_write_word(sie->dev, HUSB_SIE_pCurrentTDPtr(sie->sie_num), addr);
+}
+
+u16 c67x00_ll_husb_get_current_td(struct c67x00_sie *sie)
+{
+        return hpi_read_word(sie->dev, HUSB_SIE_pCurrentTDPtr(sie->sie_num));
+}
+
+u16 c67x00_ll_husb_get_frame(struct c67x00_sie *sie)
+{
+        return hpi_read_word(sie->dev, HOST_FRAME_REG(sie->sie_num));
+}
+
+void c67x00_ll_husb_init_host_port(struct c67x00_sie *sie)
+{
+        /* Set port into host mode */
+        hpi_set_bits(sie->dev, USB_CTL_REG(sie->sie_num), HOST_MODE);
+        c67x00_ll_husb_sie_init(sie);
+        /* Clear interrupts */
+        c67x00_ll_usb_clear_status(sie, HOST_STAT_MASK);
+        /* Check */
+        if (!(hpi_read_word(sie->dev, USB_CTL_REG(sie->sie_num)) & HOST_MODE))
+                dev_warn(sie_dev(sie),
+                         "SIE %d not set to host mode\n", sie->sie_num);
+}
+
+void c67x00_ll_husb_reset_port(struct c67x00_sie *sie, int port)
+{
+        /* Clear connect change */
+        c67x00_ll_usb_clear_status(sie, PORT_CONNECT_CHANGE(port));
+
+        /* Enable interrupts */
+        hpi_set_bits(sie->dev, HPI_IRQ_ROUTING_REG,
+                     SOFEOP_TO_CPU_EN(sie->sie_num));
+        hpi_set_bits(sie->dev, HOST_IRQ_EN_REG(sie->sie_num),
+                     SOF_EOP_IRQ_EN | DONE_IRQ_EN);
+
+        /* Enable pull down transistors */
+        hpi_set_bits(sie->dev, USB_CTL_REG(sie->sie_num), PORT_RES_EN(port));
+}
+
+/* -------------------------------------------------------------------------- */
+
+void c67x00_ll_irq(struct c67x00_device *dev, u16 int_status)
+{
+        if ((int_status & MBX_OUT_FLG) == 0)
+                return;
+
+        dev->hpi.lcp.last_msg = hpi_recv_mbox(dev);
+        complete(&dev->hpi.lcp.msg_received);
+}
+
+/* -------------------------------------------------------------------------- */
+
+int c67x00_ll_reset(struct c67x00_device *dev)
+{
+        int rc;
+
+        mutex_lock(&dev->hpi.lcp.mutex);
+        hpi_send_mbox(dev, COMM_RESET);
+        rc = ll_recv_msg(dev);
+        mutex_unlock(&dev->hpi.lcp.mutex);
+
+        return rc;
+}
+
+/* -------------------------------------------------------------------------- */
+
+/**
+ * c67x00_ll_write_mem_le16 - write into c67x00 memory
+ * Only data is little endian, addr has cpu endianess.
+ */
+void c67x00_ll_write_mem_le16(struct c67x00_device *dev, u16 addr,
+                              void *data, int len)
+{
+        u8 *buf = data;
+
+        /* Sanity check */
+        if (addr + len > 0xffff) {
+                dev_err(&dev->pdev->dev,
+                        "Trying to write beyond writable region!\n");
+                return;
+        }
+
+        if (addr & 0x01) {
+                /* unaligned access */
+                u16 tmp;
+                tmp = hpi_read_word(dev, addr - 1);
+                tmp = (tmp & 0x00ff) | (*buf++ << 8);
+                hpi_write_word(dev, addr - 1, tmp);
+                addr++;
+                len--;
+        }
+
+        hpi_write_words_le16(dev, addr, (u16 *)buf, len / 2);
+        buf += len & ~0x01;
+        addr += len & ~0x01;
+        len &= 0x01;
+
+        if (len) {
+                u16 tmp;
+                tmp = hpi_read_word(dev, addr);
+                tmp = (tmp & 0xff00) | *buf;
+                hpi_write_word(dev, addr, tmp);
+        }
+}
+
+/**
+ * c67x00_ll_read_mem_le16 - read from c67x00 memory
+ * Only data is little endian, addr has cpu endianess.
+ */
+void c67x00_ll_read_mem_le16(struct c67x00_device *dev, u16 addr,
+                             void *data, int len)
+{
+        u8 *buf = data;
+
+        if (addr & 0x01) {
+                /* unaligned access */
+                u16 tmp;
+                tmp = hpi_read_word(dev, addr - 1);
+                *buf++ = (tmp >> 8) & 0x00ff;
+                addr++;
+                len--;
+        }
+
+        hpi_read_words_le16(dev, addr, (u16 *)buf, len / 2);
+        buf += len & ~0x01;
+        addr += len & ~0x01;
+        len &= 0x01;
+
+        if (len) {
+                u16 tmp;
+                tmp = hpi_read_word(dev, addr);
+                *buf = tmp & 0x00ff;
+        }
+}
+
+/* -------------------------------------------------------------------------- */
+
+void c67x00_ll_init(struct c67x00_device *dev)
+{
+        mutex_init(&dev->hpi.lcp.mutex);
+        init_completion(&dev->hpi.lcp.msg_received);
+}
+
+void c67x00_ll_release(struct c67x00_device *dev)
+{
+}
diff --git a/drivers/usb/c67x00/c67x00-sched.c b/drivers/usb/c67x00/c67x00-sched.c
new file mode 100644
index 000000000000..85dfe2965661
--- /dev/null
+++ b/drivers/usb/c67x00/c67x00-sched.c
@@ -0,0 +1,1170 @@
+/*
+ * c67x00-sched.c: Cypress C67X00 USB Host Controller Driver - TD scheduling
+ *
+ * Copyright (C) 2006-2008 Barco N.V.
+ *    Derived from the Cypress cy7c67200/300 ezusb linux driver and
+ *    based on multiple host controller drivers inside the linux kernel.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA  02110-1301  USA.
+ */
+
+#include <linux/kthread.h>
+
+#include "c67x00.h"
+#include "c67x00-hcd.h"
+
+/*
+ * These are the stages for a control urb, they are kept
+ * in both urb->interval and td->privdata.
+ */
+#define SETUP_STAGE             0
+#define DATA_STAGE              1
+#define STATUS_STAGE            2
+
+/* -------------------------------------------------------------------------- */
+
+/**
+ * struct c67x00_ep_data: Host endpoint data structure
+ */
+struct c67x00_ep_data {
+        struct list_head queue;
+        struct list_head node;
+        struct usb_host_endpoint *hep;
+        struct usb_device *dev;
+        u16 next_frame;         /* For int/isoc transactions */
+};
+
+/**
+ * struct c67x00_td
+ *
+ * Hardware parts are little endiannes, SW in CPU endianess.
+ */
+struct c67x00_td {
+        /* HW specific part */
+        __le16 ly_base_addr;    /* Bytes 0-1 */
+        __le16 port_length;     /* Bytes 2-3 */
+        u8 pid_ep;              /* Byte 4 */
+        u8 dev_addr;            /* Byte 5 */
+        u8 ctrl_reg;            /* Byte 6 */
+        u8 status;              /* Byte 7 */
+        u8 retry_cnt;           /* Byte 8 */
+#define TT_OFFSET               2
+#define TT_CONTROL              0
+#define TT_ISOCHRONOUS          1
+#define TT_BULK                 2
+#define TT_INTERRUPT            3
+        u8 residue;             /* Byte 9 */
+        __le16 next_td_addr;    /* Bytes 10-11 */
+        /* SW part */
+        struct list_head td_list;
+        u16 td_addr;
+        void *data;
+        struct urb *urb;
+        unsigned long privdata;
+
+        /* These are needed for handling the toggle bits:
+         * an urb can be dequeued while a td is in progress
+         * after checking the td, the toggle bit might need to
+         * be fixed */
+        struct c67x00_ep_data *ep_data;
+        unsigned int pipe;
+};
+
+struct c67x00_urb_priv {
+        struct list_head hep_node;
+        struct urb *urb;
+        int port;
+        int cnt;                /* packet number for isoc */
+        int status;
+        struct c67x00_ep_data *ep_data;
+};
+
+#define td_udev(td)     ((td)->ep_data->dev)
+
+#define CY_TD_SIZE              12
+
+#define TD_PIDEP_OFFSET         0x04
+#define TD_PIDEPMASK_PID        0xF0
+#define TD_PIDEPMASK_EP         0x0F
+#define TD_PORTLENMASK_DL       0x02FF
+#define TD_PORTLENMASK_PN       0xC000
+
+#define TD_STATUS_OFFSET        0x07
+#define TD_STATUSMASK_ACK       0x01
+#define TD_STATUSMASK_ERR       0x02
+#define TD_STATUSMASK_TMOUT     0x04
+#define TD_STATUSMASK_SEQ       0x08
+#define TD_STATUSMASK_SETUP     0x10
+#define TD_STATUSMASK_OVF       0x20
+#define TD_STATUSMASK_NAK       0x40
+#define TD_STATUSMASK_STALL     0x80
+
+#define TD_ERROR_MASK           (TD_STATUSMASK_ERR | TD_STATUSMASK_TMOUT | \
+                                 TD_STATUSMASK_STALL)
+
+#define TD_RETRYCNT_OFFSET      0x08
+#define TD_RETRYCNTMASK_ACT_FLG 0x10
+#define TD_RETRYCNTMASK_TX_TYPE 0x0C
+#define TD_RETRYCNTMASK_RTY_CNT 0x03
+
+#define TD_RESIDUE_OVERFLOW     0x80
+
+#define TD_PID_IN               0x90
+
+/* Residue: signed 8bits, neg -> OVERFLOW, pos -> UNDERFLOW */
+#define td_residue(td)          ((__s8)(td->residue))
+#define td_ly_base_addr(td)     (__le16_to_cpu((td)->ly_base_addr))
+#define td_port_length(td)      (__le16_to_cpu((td)->port_length))
+#define td_next_td_addr(td)     (__le16_to_cpu((td)->next_td_addr))
+
+#define td_active(td)           ((td)->retry_cnt & TD_RETRYCNTMASK_ACT_FLG)
+#define td_length(td)           (td_port_length(td) & TD_PORTLENMASK_DL)
+
+#define td_sequence_ok(td)      (!td->status || \
+                                 (!(td->status & TD_STATUSMASK_SEQ) ==  \
+                                  !(td->ctrl_reg & SEQ_SEL)))
+
+#define td_acked(td)            (!td->status || \
+                                 (td->status & TD_STATUSMASK_ACK))
+#define td_actual_bytes(td)     (td_length(td) - td_residue(td))
+
+/* -------------------------------------------------------------------------- */
+
+#ifdef DEBUG
+
+/**
+ * dbg_td - Dump the contents of the TD
+ */
+static void dbg_td(struct c67x00_hcd *c67x00, struct c67x00_td *td, char *msg)
+{
+        struct device *dev = c67x00_hcd_dev(c67x00);
+
+        dev_dbg(dev, "### %s at 0x%04x\n", msg, td->td_addr);
+        dev_dbg(dev, "urb:      0x%p\n", td->urb);
+        dev_dbg(dev, "endpoint:   %4d\n", usb_pipeendpoint(td->pipe));
+        dev_dbg(dev, "pipeout:    %4d\n", usb_pipeout(td->pipe));
+        dev_dbg(dev, "ly_base_addr: 0x%04x\n", td_ly_base_addr(td));
+        dev_dbg(dev, "port_length:  0x%04x\n", td_port_length(td));
+        dev_dbg(dev, "pid_ep:         0x%02x\n", td->pid_ep);
+        dev_dbg(dev, "dev_addr:       0x%02x\n", td->dev_addr);
+        dev_dbg(dev, "ctrl_reg:       0x%02x\n", td->ctrl_reg);
+        dev_dbg(dev, "status:         0x%02x\n", td->status);
+        dev_dbg(dev, "retry_cnt:      0x%02x\n", td->retry_cnt);
+        dev_dbg(dev, "residue:        0x%02x\n", td->residue);
+        dev_dbg(dev, "next_td_addr: 0x%04x\n", td_next_td_addr(td));
+        dev_dbg(dev, "data:");
+        print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 16, 1,
+                       td->data, td_length(td), 1);
+}
+#else                           /* DEBUG */
+
+static inline void
+dbg_td(struct c67x00_hcd *c67x00, struct c67x00_td *td, char *msg) { }
+
+#endif                          /* DEBUG */
+
+/* -------------------------------------------------------------------------- */
+/* Helper functions */
+
+static inline u16 c67x00_get_current_frame_number(struct c67x00_hcd *c67x00)
+{
+        return c67x00_ll_husb_get_frame(c67x00->sie) & HOST_FRAME_MASK;
+}
+
+/**
+ * frame_add
+ * Software wraparound for framenumbers.
+ */
+static inline u16 frame_add(u16 a, u16 b)
+{
+        return (a + b) & HOST_FRAME_MASK;
+}
+
+/**
+ * frame_after - is frame a after frame b
+ */
+static inline int frame_after(u16 a, u16 b)
+{
+        return ((HOST_FRAME_MASK + a - b) & HOST_FRAME_MASK) <
+            (HOST_FRAME_MASK / 2);
+}
+
+/**
+ * frame_after_eq - is frame a after or equal to frame b
+ */
+static inline int frame_after_eq(u16 a, u16 b)
+{
+        return ((HOST_FRAME_MASK + 1 + a - b) & HOST_FRAME_MASK) <
+            (HOST_FRAME_MASK / 2);
+}
+
+/* -------------------------------------------------------------------------- */
+
+/**
+ * c67x00_release_urb - remove link from all tds to this urb
+ * Disconnects the urb from it's tds, so that it can be given back.
+ * pre: urb->hcpriv != NULL
+ */
+static void c67x00_release_urb(struct c67x00_hcd *c67x00, struct urb *urb)
+{
+        struct c67x00_td *td;
+        struct c67x00_urb_priv *urbp;
+
+        BUG_ON(!urb);
+
+        c67x00->urb_count--;
+
+        if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
+                c67x00->urb_iso_count--;
+                if (c67x00->urb_iso_count == 0)
+                        c67x00->max_frame_bw = MAX_FRAME_BW_STD;
+        }
+
+        /* TODO this might be not so efficient when we've got many urbs!
+         * Alternatives:
+         *   * only clear when needed
+         *   * keep a list of tds with each urbp
+         */
+        list_for_each_entry(td, &c67x00->td_list, td_list)
+                if (urb == td->urb)
+                        td->urb = NULL;
+
+        urbp = urb->hcpriv;
+        urb->hcpriv = NULL;
+        list_del(&urbp->hep_node);
+        kfree(urbp);
+}
+
+/* -------------------------------------------------------------------------- */
+
+static struct c67x00_ep_data *
+c67x00_ep_data_alloc(struct c67x00_hcd *c67x00, struct urb *urb)
+{
+        struct usb_host_endpoint *hep = urb->ep;
+        struct c67x00_ep_data *ep_data;
+        int type;
+
+        c67x00->current_frame = c67x00_get_current_frame_number(c67x00);
+
+        /* Check if endpoint already has a c67x00_ep_data struct allocated */
+        if (hep->hcpriv) {
+                ep_data = hep->hcpriv;
+                if (frame_after(c67x00->current_frame, ep_data->next_frame))
+                        ep_data->next_frame =
+                            frame_add(c67x00->current_frame, 1);
+                return hep->hcpriv;
+        }
+
+        /* Allocate and initialize a new c67x00 endpoint data structure */
+        ep_data = kzalloc(sizeof(*ep_data), GFP_ATOMIC);
+        if (!ep_data)
+                return NULL;
+
+        INIT_LIST_HEAD(&ep_data->queue);
+        INIT_LIST_HEAD(&ep_data->node);
+        ep_data->hep = hep;
+
+        /* hold a reference to udev as long as this endpoint lives,
+         * this is needed to possibly fix the data toggle */
+        ep_data->dev = usb_get_dev(urb->dev);
+        hep->hcpriv = ep_data;
+
+        /* For ISOC and INT endpoints, start ASAP: */
+        ep_data->next_frame = frame_add(c67x00->current_frame, 1);
+
+        /* Add the endpoint data to one of the pipe lists; must be added
+           in order of endpoint address */
+        type = usb_pipetype(urb->pipe);
+        if (list_empty(&ep_data->node)) {
+                list_add(&ep_data->node, &c67x00->list[type]);
+        } else {
+                struct c67x00_ep_data *prev;
+
+                list_for_each_entry(prev, &c67x00->list[type], node) {
+                        if (prev->hep->desc.bEndpointAddress >
+                            hep->desc.bEndpointAddress) {
+                                list_add(&ep_data->node, prev->node.prev);
+                                break;
+                        }
+                }
+        }
+
+        return ep_data;
+}
+
+static int c67x00_ep_data_free(struct usb_host_endpoint *hep)
+{
+        struct c67x00_ep_data *ep_data = hep->hcpriv;
+
+        if (!ep_data)
+                return 0;
+
+        if (!list_empty(&ep_data->queue))
+                return -EBUSY;
+
+        usb_put_dev(ep_data->dev);
+        list_del(&ep_data->queue);
+        list_del(&ep_data->node);
+
+        kfree(ep_data);
+        hep->hcpriv = NULL;
+
+        return 0;
+}
+
+void c67x00_endpoint_disable(struct usb_hcd *hcd, struct usb_host_endpoint *ep)
+{
+        struct c67x00_hcd *c67x00 = hcd_to_c67x00_hcd(hcd);
+        unsigned long flags;
+
+        if (!list_empty(&ep->urb_list))
+                dev_warn(c67x00_hcd_dev(c67x00), "error: urb list not empty\n");
+
+        spin_lock_irqsave(&c67x00->lock, flags);
+
+        /* loop waiting for all transfers in the endpoint queue to complete */
+        while (c67x00_ep_data_free(ep)) {
+                /* Drop the lock so we can sleep waiting for the hardware */
+                spin_unlock_irqrestore(&c67x00->lock, flags);
+
+                /* it could happen that we reinitialize this completion, while
+                 * somebody was waiting for that completion.  The timeout and
+                 * while loop handle such cases, but this might be improved */
+                INIT_COMPLETION(c67x00->endpoint_disable);
+                c67x00_sched_kick(c67x00);
+                wait_for_completion_timeout(&c67x00->endpoint_disable, 1 * HZ);
+
+                spin_lock_irqsave(&c67x00->lock, flags);
+        }
+
+        spin_unlock_irqrestore(&c67x00->lock, flags);
+}
+
+/* -------------------------------------------------------------------------- */
+
+static inline int get_root_port(struct usb_device *dev)
+{
+        while (dev->parent->parent)
+                dev = dev->parent;
+        return dev->portnum;
+}
+
+int c67x00_urb_enqueue(struct usb_hcd *hcd,
+                       struct urb *urb, gfp_t mem_flags)
+{
+        int ret;
+        unsigned long flags;
+        struct c67x00_urb_priv *urbp;
+        struct c67x00_hcd *c67x00 = hcd_to_c67x00_hcd(hcd);
+        int port = get_root_port(urb->dev)-1;
+
+        spin_lock_irqsave(&c67x00->lock, flags);
+
+        /* Make sure host controller is running */
+        if (!HC_IS_RUNNING(hcd->state)) {
+                ret = -ENODEV;
+                goto err_not_linked;
+        }
+
+        ret = usb_hcd_link_urb_to_ep(hcd, urb);
+        if (ret)
+                goto err_not_linked;
+
+        /* Allocate and initialize urb private data */
+        urbp = kzalloc(sizeof(*urbp), mem_flags);
+        if (!urbp) {
+                ret = -ENOMEM;
+                goto err_urbp;
+        }
+
+        INIT_LIST_HEAD(&urbp->hep_node);
+        urbp->urb = urb;
+        urbp->port = port;
+
+        urbp->ep_data = c67x00_ep_data_alloc(c67x00, urb);
+
+        if (!urbp->ep_data) {
+                ret = -ENOMEM;
+                goto err_epdata;
+        }
+
+        /* TODO claim bandwidth with usb_claim_bandwidth?
+         * also release it somewhere! */
+
+        urb->hcpriv = urbp;
+
+        urb->actual_length = 0; /* Nothing received/transmitted yet */
+
+        switch (usb_pipetype(urb->pipe)) {
+        case PIPE_CONTROL:
+                urb->interval = SETUP_STAGE;
+                break;
+        case PIPE_INTERRUPT:
+                break;
+        case PIPE_BULK:
+                break;
+        case PIPE_ISOCHRONOUS:
+                if (c67x00->urb_iso_count == 0)
+                        c67x00->max_frame_bw = MAX_FRAME_BW_ISO;
+                c67x00->urb_iso_count++;
+                /* Assume always URB_ISO_ASAP, FIXME */
+                if (list_empty(&urbp->ep_data->queue))
+                        urb->start_frame = urbp->ep_data->next_frame;
+                else {
+                        /* Go right after the last one */
+                        struct urb *last_urb;
+
+                        last_urb = list_entry(urbp->ep_data->queue.prev,
+                                              struct c67x00_urb_priv,
+                                              hep_node)->urb;
+                        urb->start_frame =
+                            frame_add(last_urb->start_frame,
+                                      last_urb->number_of_packets *
+                                      last_urb->interval);
+                }
+                urbp->cnt = 0;
+                break;
+        }
+
+        /* Add the URB to the endpoint queue */
+        list_add_tail(&urbp->hep_node, &urbp->ep_data->queue);
+
+        /* If this is the only URB, kick start the controller */
+        if (!c67x00->urb_count++)
+                c67x00_ll_hpi_enable_sofeop(c67x00->sie);
+
+        c67x00_sched_kick(c67x00);
+        spin_unlock_irqrestore(&c67x00->lock, flags);
+
+        return 0;
+
+err_epdata:
+        kfree(urbp);
+err_urbp:
+        usb_hcd_unlink_urb_from_ep(hcd, urb);
+err_not_linked:
+        spin_unlock_irqrestore(&c67x00->lock, flags);
+
+        return ret;
+}
+
+int c67x00_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
+{
+        struct c67x00_hcd *c67x00 = hcd_to_c67x00_hcd(hcd);
+        unsigned long flags;
+        int rc;
+
+        spin_lock_irqsave(&c67x00->lock, flags);
+        rc = usb_hcd_check_unlink_urb(hcd, urb, status);
+        if (rc)
+                goto done;
+
+        c67x00_release_urb(c67x00, urb);
+        usb_hcd_unlink_urb_from_ep(hcd, urb);
+
+        spin_unlock(&c67x00->lock);
+        usb_hcd_giveback_urb(hcd, urb, status);
+        spin_lock(&c67x00->lock);
+
+        spin_unlock_irqrestore(&c67x00->lock, flags);
+
+        return 0;
+
+ done:
+        spin_unlock_irqrestore(&c67x00->lock, flags);
+        return rc;
+}
+
+/* -------------------------------------------------------------------------- */
+
+/*
+ * pre: c67x00 locked, urb unlocked
+ */
+static void
+c67x00_giveback_urb(struct c67x00_hcd *c67x00, struct urb *urb, int status)
+{
+        struct c67x00_urb_priv *urbp;
+
+        if (!urb)
+                return;
+
+        urbp = urb->hcpriv;
+        urbp->status = status;
+
+        list_del_init(&urbp->hep_node);
+
+        c67x00_release_urb(c67x00, urb);
+        usb_hcd_unlink_urb_from_ep(c67x00_hcd_to_hcd(c67x00), urb);
+        spin_unlock(&c67x00->lock);
+        usb_hcd_giveback_urb(c67x00_hcd_to_hcd(c67x00), urb, urbp->status);
+        spin_lock(&c67x00->lock);
+}
+
+/* -------------------------------------------------------------------------- */
+
+static int c67x00_claim_frame_bw(struct c67x00_hcd *c67x00, struct urb *urb,
+                                 int len, int periodic)
+{
+        struct c67x00_urb_priv *urbp = urb->hcpriv;
+        int bit_time;
+
+        /* According to the C67x00 BIOS user manual, page 3-18,19, the
+         * following calculations provide the full speed bit times for
+         * a transaction.
+         *
+         * FS(in)       = 112.5 +  9.36*BC + HOST_DELAY
+         * FS(in,iso)   =  90.5 +  9.36*BC + HOST_DELAY
+         * FS(out)      = 112.5 +  9.36*BC + HOST_DELAY
+         * FS(out,iso)  =  78.4 +  9.36*BC + HOST_DELAY
+         * LS(in)       = 802.4 + 75.78*BC + HOST_DELAY
+         * LS(out)      = 802.6 + 74.67*BC + HOST_DELAY
+         *
+         * HOST_DELAY == 106 for the c67200 and c67300.
+         */
+
+        /* make calculations in 1/100 bit times to maintain resolution */
+        if (urbp->ep_data->dev->speed == USB_SPEED_LOW) {
+                /* Low speed pipe */
+                if (usb_pipein(urb->pipe))
+                        bit_time = 80240 + 7578*len;
+                else
+                        bit_time = 80260 + 7467*len;
+        } else {
+                /* FS pipes */
+                if (usb_pipeisoc(urb->pipe))
+                        bit_time = usb_pipein(urb->pipe) ? 9050 : 7840;
+                else
+                        bit_time = 11250;
+                bit_time += 936*len;
+        }
+
+        /* Scale back down to integer bit times.  Use a host delay of 106.
+         * (this is the only place it is used) */
+        bit_time = ((bit_time+50) / 100) + 106;
+
+        if (unlikely(bit_time + c67x00->bandwidth_allocated >=
+                     c67x00->max_frame_bw))
+                return -EMSGSIZE;
+
+        if (unlikely(c67x00->next_td_addr + CY_TD_SIZE >=
+                     c67x00->td_base_addr + SIE_TD_SIZE))
+                return -EMSGSIZE;
+
+        if (unlikely(c67x00->next_buf_addr + len >=
+                     c67x00->buf_base_addr + SIE_TD_BUF_SIZE))
+                return -EMSGSIZE;
+
+        if (periodic) {
+                if (unlikely(bit_time + c67x00->periodic_bw_allocated >=
+                             MAX_PERIODIC_BW(c67x00->max_frame_bw)))
+                        return -EMSGSIZE;
+                c67x00->periodic_bw_allocated += bit_time;
+        }
+
+        c67x00->bandwidth_allocated += bit_time;
+        return 0;
+}
+
+/* -------------------------------------------------------------------------- */
+
+/**
+ * td_addr and buf_addr must be word aligned
+ */
+static int c67x00_create_td(struct c67x00_hcd *c67x00, struct urb *urb,
+                            void *data, int len, int pid, int toggle,
+                            unsigned long privdata)
+{
+        struct c67x00_td *td;
+        struct c67x00_urb_priv *urbp = urb->hcpriv;
+        const __u8 active_flag = 1, retry_cnt = 1;
+        __u8 cmd = 0;
+        int tt = 0;
+
+        if (c67x00_claim_frame_bw(c67x00, urb, len, usb_pipeisoc(urb->pipe)
+                                  || usb_pipeint(urb->pipe)))
+                return -EMSGSIZE;       /* Not really an error, but expected */
+
+        td = kzalloc(sizeof(*td), GFP_ATOMIC);
+        if (!td)
+                return -ENOMEM;
+
+        td->pipe = urb->pipe;
+        td->ep_data = urbp->ep_data;
+
+        if ((td_udev(td)->speed == USB_SPEED_LOW) &&
+            !(c67x00->low_speed_ports & (1 << urbp->port)))
+                cmd |= PREAMBLE_EN;
+
+        switch (usb_pipetype(td->pipe)) {
+        case PIPE_ISOCHRONOUS:
+                tt = TT_ISOCHRONOUS;
+                cmd |= ISO_EN;
+                break;
+        case PIPE_CONTROL:
+                tt = TT_CONTROL;
+                break;
+        case PIPE_BULK:
+                tt = TT_BULK;
+                break;
+        case PIPE_INTERRUPT:
+                tt = TT_INTERRUPT;
+                break;
+        }
+
+        if (toggle)
+                cmd |= SEQ_SEL;
+
+        cmd |= ARM_EN;
+
+        /* SW part */
+        td->td_addr = c67x00->next_td_addr;
+        c67x00->next_td_addr = c67x00->next_td_addr + CY_TD_SIZE;
+
+        /* HW part */
+        td->ly_base_addr = __cpu_to_le16(c67x00->next_buf_addr);
+        td->port_length = __cpu_to_le16((c67x00->sie->sie_num << 15) |
+                                        (urbp->port << 14) | (len & 0x3FF));
+        td->pid_ep = ((pid & 0xF) << TD_PIDEP_OFFSET) |
+            (usb_pipeendpoint(td->pipe) & 0xF);
+        td->dev_addr = usb_pipedevice(td->pipe) & 0x7F;
+        td->ctrl_reg = cmd;
+        td->status = 0;
+        td->retry_cnt = (tt << TT_OFFSET) | (active_flag << 4) | retry_cnt;
+        td->residue = 0;
+        td->next_td_addr = __cpu_to_le16(c67x00->next_td_addr);
+
+        /* SW part */
+        td->data = data;
+        td->urb = urb;
+        td->privdata = privdata;
+
+        c67x00->next_buf_addr += (len + 1) & ~0x01;     /* properly align */
+
+        list_add_tail(&td->td_list, &c67x00->td_list);
+        return 0;
+}
+
+static inline void c67x00_release_td(struct c67x00_td *td)
+{
+        list_del_init(&td->td_list);
+        kfree(td);
+}
+
+/* -------------------------------------------------------------------------- */
+
+static int c67x00_add_data_urb(struct c67x00_hcd *c67x00, struct urb *urb)
+{
+        int remaining;
+        int toggle;
+        int pid;
+        int ret = 0;
+        int maxps;
+        int need_empty;
+
+        toggle = usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe),
+                               usb_pipeout(urb->pipe));
+        remaining = urb->transfer_buffer_length - urb->actual_length;
+
+        maxps = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe));
+
+        need_empty = (urb->transfer_flags & URB_ZERO_PACKET) &&
+            usb_pipeout(urb->pipe) && !(remaining % maxps);
+
+        while (remaining || need_empty) {
+                int len;
+                char *td_buf;
+
+                len = (remaining > maxps) ? maxps : remaining;
+                if (!len)
+                        need_empty = 0;
+
+                pid = usb_pipeout(urb->pipe) ? USB_PID_OUT : USB_PID_IN;
+                td_buf = urb->transfer_buffer + urb->transfer_buffer_length -
+                    remaining;
+                ret = c67x00_create_td(c67x00, urb, td_buf, len, pid, toggle,
+                                       DATA_STAGE);
+                if (ret)
+                        return ret;     /* td wasn't created */
+
+                toggle ^= 1;
+                remaining -= len;
+                if (usb_pipecontrol(urb->pipe))
+                        break;
+        }
+
+        return 0;
+}
+
+/**
+ * return 0 in case more bandwidth is available, else errorcode
+ */
+static int c67x00_add_ctrl_urb(struct c67x00_hcd *c67x00, struct urb *urb)
+{
+        int ret;
+        int pid;
+
+        switch (urb->interval) {
+        default:
+        case SETUP_STAGE:
+                ret = c67x00_create_td(c67x00, urb, urb->setup_packet,
+                                       8, USB_PID_SETUP, 0, SETUP_STAGE);
+                if (ret)
+                        return ret;
+                urb->interval = SETUP_STAGE;
+                usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe),
+                              usb_pipeout(urb->pipe), 1);
+                break;
+        case DATA_STAGE:
+                if (urb->transfer_buffer_length) {
+                        ret = c67x00_add_data_urb(c67x00, urb);
+                        if (ret)
+                                return ret;
+                        break;
+                }               /* else fallthrough */
+        case STATUS_STAGE:
+                pid = !usb_pipeout(urb->pipe) ? USB_PID_OUT : USB_PID_IN;
+                ret = c67x00_create_td(c67x00, urb, NULL, 0, pid, 1,
+                                       STATUS_STAGE);
+                if (ret)
+                        return ret;
+                break;
+        }
+
+        return 0;
+}
+
+/*
+ * return 0 in case more bandwidth is available, else errorcode
+ */
+static int c67x00_add_int_urb(struct c67x00_hcd *c67x00, struct urb *urb)
+{
+        struct c67x00_urb_priv *urbp = urb->hcpriv;
+
+        if (frame_after_eq(c67x00->current_frame, urbp->ep_data->next_frame)) {
+                urbp->ep_data->next_frame =
+                    frame_add(urbp->ep_data->next_frame, urb->interval);
+                return c67x00_add_data_urb(c67x00, urb);
+        }
+        return 0;
+}
+
+static int c67x00_add_iso_urb(struct c67x00_hcd *c67x00, struct urb *urb)
+{
+        struct c67x00_urb_priv *urbp = urb->hcpriv;
+
+        if (frame_after_eq(c67x00->current_frame, urbp->ep_data->next_frame)) {
+                char *td_buf;
+                int len, pid, ret;
+
+                BUG_ON(urbp->cnt >= urb->number_of_packets);
+
+                td_buf = urb->transfer_buffer +
+                    urb->iso_frame_desc[urbp->cnt].offset;
+                len = urb->iso_frame_desc[urbp->cnt].length;
+                pid = usb_pipeout(urb->pipe) ? USB_PID_OUT : USB_PID_IN;
+
+                ret = c67x00_create_td(c67x00, urb, td_buf, len, pid, 0,
+                                       urbp->cnt);
+                if (ret) {
+                        printk(KERN_DEBUG "create failed: %d\n", ret);
+                        urb->iso_frame_desc[urbp->cnt].actual_length = 0;
+                        urb->iso_frame_desc[urbp->cnt].status = ret;
+                        if (urbp->cnt + 1 == urb->number_of_packets)
+                                c67x00_giveback_urb(c67x00, urb, 0);
+                }
+
+                urbp->ep_data->next_frame =
+                    frame_add(urbp->ep_data->next_frame, urb->interval);
+                urbp->cnt++;
+        }
+        return 0;
+}
+
+/* -------------------------------------------------------------------------- */
+
+static void c67x00_fill_from_list(struct c67x00_hcd *c67x00, int type,
+                                  int (*add)(struct c67x00_hcd *, struct urb *))
+{
+        struct c67x00_ep_data *ep_data;
+        struct urb *urb;
+
+        /* traverse every endpoint on the list */
+        list_for_each_entry(ep_data, &c67x00->list[type], node) {
+                if (!list_empty(&ep_data->queue)) {
+                        /* and add the first urb */
+                        /* isochronous transfer rely on this */
+                        urb = list_entry(ep_data->queue.next,
+                                         struct c67x00_urb_priv,
+                                         hep_node)->urb;
+                        add(c67x00, urb);
+                }
+        }
+}
+
+static void c67x00_fill_frame(struct c67x00_hcd *c67x00)
+{
+        struct c67x00_td *td, *ttd;
+
+        /* Check if we can proceed */
+        if (!list_empty(&c67x00->td_list)) {
+                dev_warn(c67x00_hcd_dev(c67x00),
+                         "TD list not empty! This should not happen!\n");
+                list_for_each_entry_safe(td, ttd, &c67x00->td_list, td_list) {
+                        dbg_td(c67x00, td, "Unprocessed td");
+                        c67x00_release_td(td);
+                }
+        }
+
+        /* Reinitialize variables */
+        c67x00->bandwidth_allocated = 0;
+        c67x00->periodic_bw_allocated = 0;
+
+        c67x00->next_td_addr = c67x00->td_base_addr;
+        c67x00->next_buf_addr = c67x00->buf_base_addr;
+
+        /* Fill the list */
+        c67x00_fill_from_list(c67x00, PIPE_ISOCHRONOUS, c67x00_add_iso_urb);
+        c67x00_fill_from_list(c67x00, PIPE_INTERRUPT, c67x00_add_int_urb);
+        c67x00_fill_from_list(c67x00, PIPE_CONTROL, c67x00_add_ctrl_urb);
+        c67x00_fill_from_list(c67x00, PIPE_BULK, c67x00_add_data_urb);
+}
+
+/* -------------------------------------------------------------------------- */
+
+/**
+ * Get TD from C67X00
+ */
+static inline void
+c67x00_parse_td(struct c67x00_hcd *c67x00, struct c67x00_td *td)
+{
+        c67x00_ll_read_mem_le16(c67x00->sie->dev,
+                                td->td_addr, td, CY_TD_SIZE);
+
+        if (usb_pipein(td->pipe) && td_actual_bytes(td))
+                c67x00_ll_read_mem_le16(c67x00->sie->dev, td_ly_base_addr(td),
+                                        td->data, td_actual_bytes(td));
+}
+
+static int c67x00_td_to_error(struct c67x00_hcd *c67x00, struct c67x00_td *td)
+{
+        if (td->status & TD_STATUSMASK_ERR) {
+                dbg_td(c67x00, td, "ERROR_FLAG");
+                return -EILSEQ;
+        }
+        if (td->status & TD_STATUSMASK_STALL) {
+                /* dbg_td(c67x00, td, "STALL"); */
+                return -EPIPE;
+        }
+        if (td->status & TD_STATUSMASK_TMOUT) {
+                dbg_td(c67x00, td, "TIMEOUT");
+                return -ETIMEDOUT;
+        }
+
+        return 0;
+}
+
+static inline int c67x00_end_of_data(struct c67x00_td *td)
+{
+        int maxps, need_empty, remaining;
+        struct urb *urb = td->urb;
+        int act_bytes;
+
+        act_bytes = td_actual_bytes(td);
+
+        if (unlikely(!act_bytes))
+                return 1;       /* This was an empty packet */
+
+        maxps = usb_maxpacket(td_udev(td), td->pipe, usb_pipeout(td->pipe));
+
+        if (unlikely(act_bytes < maxps))
+                return 1;       /* Smaller then full packet */
+
+        remaining = urb->transfer_buffer_length - urb->actual_length;
+        need_empty = (urb->transfer_flags & URB_ZERO_PACKET) &&
+            usb_pipeout(urb->pipe) && !(remaining % maxps);
+
+        if (unlikely(!remaining && !need_empty))
+                return 1;
+
+        return 0;
+}
+
+/* -------------------------------------------------------------------------- */
+
+/* Remove all td's from the list which come
+ * after last_td and are meant for the same pipe.
+ * This is used when a short packet has occured */
+static inline void c67x00_clear_pipe(struct c67x00_hcd *c67x00,
+                                     struct c67x00_td *last_td)
+{
+        struct c67x00_td *td, *tmp;
+        td = last_td;
+        tmp = last_td;
+        while (td->td_list.next != &c67x00->td_list) {
+                td = list_entry(td->td_list.next, struct c67x00_td, td_list);
+                if (td->pipe == last_td->pipe) {
+                        c67x00_release_td(td);
+                        td = tmp;
+                }
+                tmp = td;
+        }
+}
+
+/* -------------------------------------------------------------------------- */
+
+static void c67x00_handle_successful_td(struct c67x00_hcd *c67x00,
+                                        struct c67x00_td *td)
+{
+        struct urb *urb = td->urb;
+
+        if (!urb)
+                return;
+
+        urb->actual_length += td_actual_bytes(td);
+
+        switch (usb_pipetype(td->pipe)) {
+                /* isochronous tds are handled separately */
+        case PIPE_CONTROL:
+                switch (td->privdata) {
+                case SETUP_STAGE:
+                        urb->interval =
+                            urb->transfer_buffer_length ?
+                            DATA_STAGE : STATUS_STAGE;
+                        /* Don't count setup_packet with normal data: */
+                        urb->actual_length = 0;
+                        break;
+
+                case DATA_STAGE:
+                        if (c67x00_end_of_data(td)) {
+                                urb->interval = STATUS_STAGE;
+                                c67x00_clear_pipe(c67x00, td);
+                        }
+                        break;
+
+                case STATUS_STAGE:
+                        urb->interval = 0;
+                        c67x00_giveback_urb(c67x00, urb, 0);
+                        break;
+                }
+                break;
+
+        case PIPE_INTERRUPT:
+        case PIPE_BULK:
+                if (unlikely(c67x00_end_of_data(td))) {
+                        c67x00_clear_pipe(c67x00, td);
+                        c67x00_giveback_urb(c67x00, urb, 0);
+                }
+                break;
+        }
+}
+
+static void c67x00_handle_isoc(struct c67x00_hcd *c67x00, struct c67x00_td *td)
+{
+        struct urb *urb = td->urb;
+        struct c67x00_urb_priv *urbp;
+        int cnt;
+
+        if (!urb)
+                return;
+
+        urbp = urb->hcpriv;
+        cnt = td->privdata;
+
+        if (td->status & TD_ERROR_MASK)
+                urb->error_count++;
+
+        urb->iso_frame_desc[cnt].actual_length = td_actual_bytes(td);
+        urb->iso_frame_desc[cnt].status = c67x00_td_to_error(c67x00, td);
+        if (cnt + 1 == urb->number_of_packets)  /* Last packet */
+                c67x00_giveback_urb(c67x00, urb, 0);
+}
+
+/* -------------------------------------------------------------------------- */
+
+/**
+ * c67x00_check_td_list - handle tds which have been processed by the c67x00
+ * pre: current_td == 0
+ */
+static inline void c67x00_check_td_list(struct c67x00_hcd *c67x00)
+{
+        struct c67x00_td *td, *tmp;
+        struct urb *urb;
+        int ack_ok;
+        int clear_endpoint;
+
+        list_for_each_entry_safe(td, tmp, &c67x00->td_list, td_list) {
+                /* get the TD */
+                c67x00_parse_td(c67x00, td);
+                urb = td->urb;  /* urb can be NULL! */
+                ack_ok = 0;
+                clear_endpoint = 1;
+
+                /* Handle isochronous transfers separately */
+                if (usb_pipeisoc(td->pipe)) {
+                        clear_endpoint = 0;
+                        c67x00_handle_isoc(c67x00, td);
+                        goto cont;
+                }
+
+                /* When an error occurs, all td's for that pipe go into an
+                 * inactive state. This state matches successful transfers so
+                 * we must make sure not to service them. */
+                if (td->status & TD_ERROR_MASK) {
+                        c67x00_giveback_urb(c67x00, urb,
+                                            c67x00_td_to_error(c67x00, td));
+                        goto cont;
+                }
+
+                if ((td->status & TD_STATUSMASK_NAK) || !td_sequence_ok(td) ||
+                    !td_acked(td))
+                        goto cont;
+
+                /* Sequence ok and acked, don't need to fix toggle */
+                ack_ok = 1;
+
+                if (unlikely(td->status & TD_STATUSMASK_OVF)) {
+                        if (td_residue(td) & TD_RESIDUE_OVERFLOW) {
+                                /* Overflow */
+                                c67x00_giveback_urb(c67x00, urb, -EOVERFLOW);
+                                goto cont;
+                        }
+                }
+
+                clear_endpoint = 0;
+                c67x00_handle_successful_td(c67x00, td);
+
+cont:
+                if (clear_endpoint)
+                        c67x00_clear_pipe(c67x00, td);
+                if (ack_ok)
+                        usb_settoggle(td_udev(td), usb_pipeendpoint(td->pipe),
+                                      usb_pipeout(td->pipe),
+                                      !(td->ctrl_reg & SEQ_SEL));
+                /* next in list could have been removed, due to clear_pipe! */
+                tmp = list_entry(td->td_list.next, typeof(*td), td_list);
+                c67x00_release_td(td);
+        }
+}
+
+/* -------------------------------------------------------------------------- */
+
+static inline int c67x00_all_tds_processed(struct c67x00_hcd *c67x00)
+{
+        /* If all tds are processed, we can check the previous frame (if
+         * there was any) and start our next frame.
+         */
+        return !c67x00_ll_husb_get_current_td(c67x00->sie);
+}
+
+/**
+ * Send td to C67X00
+ */
+static void c67x00_send_td(struct c67x00_hcd *c67x00, struct c67x00_td *td)
+{
+        int len = td_length(td);
+
+        if (len && ((td->pid_ep & TD_PIDEPMASK_PID) != TD_PID_IN))
+                c67x00_ll_write_mem_le16(c67x00->sie->dev, td_ly_base_addr(td),
+                                         td->data, len);
+
+        c67x00_ll_write_mem_le16(c67x00->sie->dev,
+                                 td->td_addr, td, CY_TD_SIZE);
+}
+
+static void c67x00_send_frame(struct c67x00_hcd *c67x00)
+{
+        struct c67x00_td *td;
+
+        if (list_empty(&c67x00->td_list))
+                dev_warn(c67x00_hcd_dev(c67x00),
+                         "%s: td list should not be empty here!\n",
+                         __func__);
+
+        list_for_each_entry(td, &c67x00->td_list, td_list) {
+                if (td->td_list.next == &c67x00->td_list)
+                        td->next_td_addr = 0;   /* Last td in list */
+
+                c67x00_send_td(c67x00, td);
+        }
+
+        c67x00_ll_husb_set_current_td(c67x00->sie, c67x00->td_base_addr);
+}
+
+/* -------------------------------------------------------------------------- */
+
+/**
+ * c67x00_do_work - Schedulers state machine
+ */
+static void c67x00_do_work(struct c67x00_hcd *c67x00)
+{
+        spin_lock(&c67x00->lock);
+        /* Make sure all tds are processed */
+        if (!c67x00_all_tds_processed(c67x00))
+                goto out;
+
+        c67x00_check_td_list(c67x00);
+
+        /* no td's are being processed (current == 0)
+         * and all have been "checked" */
+        complete(&c67x00->endpoint_disable);
+
+        if (!list_empty(&c67x00->td_list))
+                goto out;
+
+        c67x00->current_frame = c67x00_get_current_frame_number(c67x00);
+        if (c67x00->current_frame == c67x00->last_frame)
+                goto out;       /* Don't send tds in same frame */
+        c67x00->last_frame = c67x00->current_frame;
+
+        /* If no urbs are scheduled, our work is done */
+        if (!c67x00->urb_count) {
+                c67x00_ll_hpi_disable_sofeop(c67x00->sie);
+                goto out;
+        }
+
+        c67x00_fill_frame(c67x00);
+        if (!list_empty(&c67x00->td_list))
+                /* TD's have been added to the frame */
+                c67x00_send_frame(c67x00);
+
+ out:
+        spin_unlock(&c67x00->lock);
+}
+
+/* -------------------------------------------------------------------------- */
+
+static void c67x00_sched_tasklet(unsigned long __c67x00)
+{
+        struct c67x00_hcd *c67x00 = (struct c67x00_hcd *)__c67x00;
+        c67x00_do_work(c67x00);
+}
+
+void c67x00_sched_kick(struct c67x00_hcd *c67x00)
+{
+        tasklet_hi_schedule(&c67x00->tasklet);
+}
+
+int c67x00_sched_start_scheduler(struct c67x00_hcd *c67x00)
+{
+        tasklet_init(&c67x00->tasklet, c67x00_sched_tasklet,
+                     (unsigned long)c67x00);
+        return 0;
+}
+
+void c67x00_sched_stop_scheduler(struct c67x00_hcd *c67x00)
+{
+        tasklet_kill(&c67x00->tasklet);
+}
diff --git a/drivers/usb/c67x00/c67x00.h b/drivers/usb/c67x00/c67x00.h
new file mode 100644
index 000000000000..a26e9ded0f32
--- /dev/null
+++ b/drivers/usb/c67x00/c67x00.h
@@ -0,0 +1,294 @@
+/*
+ * c67x00.h: Cypress C67X00 USB register and field definitions
+ *
+ * Copyright (C) 2006-2008 Barco N.V.
+ *    Derived from the Cypress cy7c67200/300 ezusb linux driver and
+ *    based on multiple host controller drivers inside the linux kernel.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA  02110-1301  USA.
+ */
+
+#ifndef _USB_C67X00_H
+#define _USB_C67X00_H
+
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+#include <linux/completion.h>
+#include <linux/mutex.h>
+
+/* ---------------------------------------------------------------------
+ * Cypress C67x00 register definitions
+ */
+
+/* Hardware Revision Register */
+#define HW_REV_REG              0xC004
+
+/* General USB registers */
+/* ===================== */
+
+/* USB Control Register */
+#define USB_CTL_REG(x)          ((x) ? 0xC0AA : 0xC08A)
+
+#define LOW_SPEED_PORT(x)       ((x) ? 0x0800 : 0x0400)
+#define HOST_MODE               0x0200
+#define PORT_RES_EN(x)          ((x) ? 0x0100 : 0x0080)
+#define SOF_EOP_EN(x)           ((x) ? 0x0002 : 0x0001)
+
+/* USB status register - Notice it has different content in hcd/udc mode */
+#define USB_STAT_REG(x)         ((x) ? 0xC0B0 : 0xC090)
+
+#define EP0_IRQ_FLG             0x0001
+#define EP1_IRQ_FLG             0x0002
+#define EP2_IRQ_FLG             0x0004
+#define EP3_IRQ_FLG             0x0008
+#define EP4_IRQ_FLG             0x0010
+#define EP5_IRQ_FLG             0x0020
+#define EP6_IRQ_FLG             0x0040
+#define EP7_IRQ_FLG             0x0080
+#define RESET_IRQ_FLG           0x0100
+#define SOF_EOP_IRQ_FLG         0x0200
+#define ID_IRQ_FLG              0x4000
+#define VBUS_IRQ_FLG            0x8000
+
+/* USB Host only registers */
+/* ======================= */
+
+/* Host n Control Register */
+#define HOST_CTL_REG(x)         ((x) ? 0xC0A0 : 0xC080)
+
+#define PREAMBLE_EN             0x0080  /* Preamble enable */
+#define SEQ_SEL                 0x0040  /* Data Toggle Sequence Bit Select */
+#define ISO_EN                  0x0010  /* Isochronous enable  */
+#define ARM_EN                  0x0001  /* Arm operation */
+
+/* Host n Interrupt Enable Register */
+#define HOST_IRQ_EN_REG(x)      ((x) ? 0xC0AC : 0xC08C)
+
+#define SOF_EOP_IRQ_EN          0x0200  /* SOF/EOP Interrupt Enable  */
+#define SOF_EOP_TMOUT_IRQ_EN    0x0800  /* SOF/EOP Timeout Interrupt Enable  */
+#define ID_IRQ_EN               0x4000  /* ID interrupt enable */
+#define VBUS_IRQ_EN             0x8000  /* VBUS interrupt enable */
+#define DONE_IRQ_EN             0x0001  /* Done Interrupt Enable  */
+
+/* USB status register */
+#define HOST_STAT_MASK          0x02FD
+#define PORT_CONNECT_CHANGE(x)  ((x) ? 0x0020 : 0x0010)
+#define PORT_SE0_STATUS(x)      ((x) ? 0x0008 : 0x0004)
+
+/* Host Frame Register */
+#define HOST_FRAME_REG(x)       ((x) ? 0xC0B6 : 0xC096)
+
+#define HOST_FRAME_MASK         0x07FF
+
+/* USB Peripheral only registers */
+/* ============================= */
+
+/* Device n Port Sel reg */
+#define DEVICE_N_PORT_SEL(x)    ((x) ? 0xC0A4 : 0xC084)
+
+/* Device n Interrupt Enable Register */
+#define DEVICE_N_IRQ_EN_REG(x)  ((x) ? 0xC0AC : 0xC08C)
+
+#define DEVICE_N_ENDPOINT_N_CTL_REG(dev, ep)    ((dev)                  \
+                                                 ? (0x0280 + (ep << 4)) \
+                                                 : (0x0200 + (ep << 4)))
+#define DEVICE_N_ENDPOINT_N_STAT_REG(dev, ep)   ((dev)                  \
+                                                 ? (0x0286 + (ep << 4)) \
+                                                 : (0x0206 + (ep << 4)))
+
+#define DEVICE_N_ADDRESS(dev)   ((dev) ? (0xC0AE) : (0xC08E))
+
+/* HPI registers */
+/* ============= */
+
+/* HPI Status register */
+#define SOFEOP_FLG(x)           (1 << ((x) ? 12 : 10))
+#define SIEMSG_FLG(x)           (1 << (4 + (x)))
+#define RESET_FLG(x)            ((x) ? 0x0200 : 0x0002)
+#define DONE_FLG(x)             (1 << (2 + (x)))
+#define RESUME_FLG(x)           (1 << (6 + (x)))
+#define MBX_OUT_FLG             0x0001  /* Message out available */
+#define MBX_IN_FLG              0x0100
+#define ID_FLG                  0x4000
+#define VBUS_FLG                0x8000
+
+/* Interrupt routing register */
+#define HPI_IRQ_ROUTING_REG     0x0142
+
+#define HPI_SWAP_ENABLE(x)      ((x) ? 0x0100 : 0x0001)
+#define RESET_TO_HPI_ENABLE(x)  ((x) ? 0x0200 : 0x0002)
+#define DONE_TO_HPI_ENABLE(x)   ((x) ? 0x0008 : 0x0004)
+#define RESUME_TO_HPI_ENABLE(x) ((x) ? 0x0080 : 0x0040)
+#define SOFEOP_TO_HPI_EN(x)     ((x) ? 0x2000 : 0x0800)
+#define SOFEOP_TO_CPU_EN(x)     ((x) ? 0x1000 : 0x0400)
+#define ID_TO_HPI_ENABLE        0x4000
+#define VBUS_TO_HPI_ENABLE      0x8000
+
+/* SIE msg registers */
+#define SIEMSG_REG(x)           ((x) ? 0x0148 : 0x0144)
+
+#define HUSB_TDListDone         0x1000
+
+#define SUSB_EP0_MSG            0x0001
+#define SUSB_EP1_MSG            0x0002
+#define SUSB_EP2_MSG            0x0004
+#define SUSB_EP3_MSG            0x0008
+#define SUSB_EP4_MSG            0x0010
+#define SUSB_EP5_MSG            0x0020
+#define SUSB_EP6_MSG            0x0040
+#define SUSB_EP7_MSG            0x0080
+#define SUSB_RST_MSG            0x0100
+#define SUSB_SOF_MSG            0x0200
+#define SUSB_CFG_MSG            0x0400
+#define SUSB_SUS_MSG            0x0800
+#define SUSB_ID_MSG             0x4000
+#define SUSB_VBUS_MSG           0x8000
+
+/* BIOS interrupt routines */
+
+#define SUSBx_RECEIVE_INT(x)    ((x) ? 97 : 81)
+#define SUSBx_SEND_INT(x)       ((x) ? 96 : 80)
+
+#define SUSBx_DEV_DESC_VEC(x)   ((x) ? 0x00D4 : 0x00B4)
+#define SUSBx_CONF_DESC_VEC(x)  ((x) ? 0x00D6 : 0x00B6)
+#define SUSBx_STRING_DESC_VEC(x) ((x) ? 0x00D8 : 0x00B8)
+
+#define CY_HCD_BUF_ADDR         0x500   /* Base address for host */
+#define SIE_TD_SIZE             0x200   /* size of the td list */
+#define SIE_TD_BUF_SIZE         0x400   /* size of the data buffer */
+
+#define SIE_TD_OFFSET(host)     ((host) ? (SIE_TD_SIZE+SIE_TD_BUF_SIZE) : 0)
+#define SIE_BUF_OFFSET(host)    (SIE_TD_OFFSET(host) + SIE_TD_SIZE)
+
+/* Base address of HCD + 2 x TD_SIZE + 2 x TD_BUF_SIZE */
+#define CY_UDC_REQ_HEADER_BASE  0x1100
+/* 8- byte request headers for IN/OUT transfers */
+#define CY_UDC_REQ_HEADER_SIZE  8
+
+#define CY_UDC_REQ_HEADER_ADDR(ep_num)  (CY_UDC_REQ_HEADER_BASE + \
+                                         ((ep_num) * CY_UDC_REQ_HEADER_SIZE))
+#define CY_UDC_DESC_BASE_ADDRESS        (CY_UDC_REQ_HEADER_ADDR(8))
+
+#define CY_UDC_BIOS_REPLACE_BASE        0x1800
+#define CY_UDC_REQ_BUFFER_BASE          0x2000
+#define CY_UDC_REQ_BUFFER_SIZE          0x0400
+#define CY_UDC_REQ_BUFFER_ADDR(ep_num)  (CY_UDC_REQ_BUFFER_BASE + \
+                                         ((ep_num) * CY_UDC_REQ_BUFFER_SIZE))
+
+/* ---------------------------------------------------------------------
+ * Driver data structures
+ */
+
+struct c67x00_device;
+
+/**
+ * struct c67x00_sie - Common data associated with a SIE
+ * @lock: lock to protect this struct and the associated chip registers
+ * @private_data: subdriver dependent data
+ * @irq: subdriver dependent irq handler, set NULL when not used
+ * @dev: link to common driver structure
+ * @sie_num: SIE number on chip, starting from 0
+ * @mode: SIE mode (host/peripheral/otg/not used)
+ */
+struct c67x00_sie {
+        /* Entries to be used by the subdrivers */
+        spinlock_t lock;        /* protect this structure */
+        void *private_data;
+        void (*irq) (struct c67x00_sie *sie, u16 int_status, u16 msg);
+
+        /* Read only: */
+        struct c67x00_device *dev;
+        int sie_num;
+        int mode;
+};
+
+#define sie_dev(s)      (&(s)->dev->pdev->dev)
+
+/**
+ * struct c67x00_lcp
+ */
+struct c67x00_lcp {
+        /* Internal use only */
+        struct mutex mutex;
+        struct completion msg_received;
+        u16 last_msg;
+};
+
+/*
+ * struct c67x00_hpi
+ */
+struct c67x00_hpi {
+        void __iomem *base;
+        int regstep;
+        spinlock_t lock;
+        struct c67x00_lcp lcp;
+};
+
+#define C67X00_SIES     2
+#define C67X00_PORTS    2
+
+/**
+ * struct c67x00_device - Common data associated with a c67x00 instance
+ * @hpi: hpi addresses
+ * @sie: array of sie's on this chip
+ * @pdev: platform device of instance
+ * @pdata: configuration provided by the platform
+ */
+struct c67x00_device {
+        struct c67x00_hpi hpi;
+        struct c67x00_sie sie[C67X00_SIES];
+        struct platform_device *pdev;
+        struct c67x00_platform_data *pdata;
+};
+
+/* ---------------------------------------------------------------------
+ * Low level interface functions
+ */
+
+/* Host Port Interface (HPI) functions */
+u16 c67x00_ll_hpi_status(struct c67x00_device *dev);
+void c67x00_ll_hpi_reg_init(struct c67x00_device *dev);
+void c67x00_ll_hpi_enable_sofeop(struct c67x00_sie *sie);
+void c67x00_ll_hpi_disable_sofeop(struct c67x00_sie *sie);
+
+/* General functions */
+u16 c67x00_ll_fetch_siemsg(struct c67x00_device *dev, int sie_num);
+u16 c67x00_ll_get_usb_ctl(struct c67x00_sie *sie);
+void c67x00_ll_usb_clear_status(struct c67x00_sie *sie, u16 bits);
+u16 c67x00_ll_usb_get_status(struct c67x00_sie *sie);
+void c67x00_ll_write_mem_le16(struct c67x00_device *dev, u16 addr,
+                              void *data, int len);
+void c67x00_ll_read_mem_le16(struct c67x00_device *dev, u16 addr,
+                             void *data, int len);
+
+/* Host specific functions */
+void c67x00_ll_set_husb_eot(struct c67x00_device *dev, u16 value);
+void c67x00_ll_husb_reset(struct c67x00_sie *sie, int port);
+void c67x00_ll_husb_set_current_td(struct c67x00_sie *sie, u16 addr);
+u16 c67x00_ll_husb_get_current_td(struct c67x00_sie *sie);
+u16 c67x00_ll_husb_get_frame(struct c67x00_sie *sie);
+void c67x00_ll_husb_init_host_port(struct c67x00_sie *sie);
+void c67x00_ll_husb_reset_port(struct c67x00_sie *sie, int port);
+
+/* Called by c67x00_irq to handle lcp interrupts */
+void c67x00_ll_irq(struct c67x00_device *dev, u16 int_status);
+
+/* Setup and teardown */
+void c67x00_ll_init(struct c67x00_device *dev);
+void c67x00_ll_release(struct c67x00_device *dev);
+int c67x00_ll_reset(struct c67x00_device *dev);
+
+#endif                          /* _USB_C67X00_H */
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index e819e5359d57..3e69266e1f4d 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -394,7 +394,9 @@ int usb_sg_init(struct usb_sg_request *io, struct usb_device *dev,
         if (!io->urbs)
                 goto nomem;
 
-        urb_flags = URB_NO_TRANSFER_DMA_MAP | URB_NO_INTERRUPT;
+        urb_flags = URB_NO_INTERRUPT;
+        if (dma)
+                urb_flags |= URB_NO_TRANSFER_DMA_MAP;
         if (usb_pipein(pipe))
                 urb_flags |= URB_SHORT_NOT_OK;
 
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index f7b54651dd42..6e784d2db423 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -231,6 +231,26 @@ config SUPERH_BUILT_IN_M66592
            However, this problem is improved if change a value of
            NET_IP_ALIGN to 4.
 
+config USB_GADGET_PXA27X
+        boolean "PXA 27x"
+        depends on ARCH_PXA && PXA27x
+        help
+           Intel's PXA 27x series XScale ARM v5TE processors include
+           an integrated full speed USB 1.1 device controller.
+
+           It has up to 23 endpoints, as well as endpoint zero (for
+           control transfers).
+
+           Say "y" to link the driver statically, or "m" to build a
+           dynamically linked module called "pxa27x_udc" and force all
+           gadget drivers to also be dynamically linked.
+
+config USB_PXA27X
+        tristate
+        depends on USB_GADGET_PXA27X
+        default USB_GADGET
+        select USB_GADGET_SELECTED
+
 config USB_GADGET_GOKU
         boolean "Toshiba TC86C001 'Goku-S'"
         depends on PCI
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index c3aab80b6c76..12357255d740 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_USB_DUMMY_HCD)	+= dummy_hcd.o
 obj-$(CONFIG_USB_NET2280)       += net2280.o
 obj-$(CONFIG_USB_AMD5536UDC)    += amd5536udc.o
 obj-$(CONFIG_USB_PXA2XX)        += pxa2xx_udc.o
+obj-$(CONFIG_USB_PXA27X)        += pxa27x_udc.o
 obj-$(CONFIG_USB_GOKU)          += goku_udc.o
 obj-$(CONFIG_USB_OMAP)          += omap_udc.o
 obj-$(CONFIG_USB_LH7A40X)       += lh7a40x_udc.o
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index bb93bdd76593..8d61ea67a817 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -235,10 +235,6 @@ MODULE_PARM_DESC(host_addr, "Host Ethernet Address");
 #define DEV_CONFIG_CDC
 #endif
 
-#ifdef CONFIG_USB_GADGET_PXA27X
-#define DEV_CONFIG_CDC
-#endif
-
 #ifdef CONFIG_USB_GADGET_S3C2410
 #define DEV_CONFIG_CDC
 #endif
@@ -270,6 +266,10 @@ MODULE_PARM_DESC(host_addr, "Host Ethernet Address");
 #define DEV_CONFIG_SUBSET
 #endif
 
+#ifdef CONFIG_USB_GADGET_PXA27X
+#define DEV_CONFIG_SUBSET
+#endif
+
 #ifdef CONFIG_USB_GADGET_SUPERH
 #define DEV_CONFIG_SUBSET
 #endif
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
index bf3f946fd455..47bb9f09a1aa 100644
--- a/drivers/usb/gadget/file_storage.c
+++ b/drivers/usb/gadget/file_storage.c
@@ -2307,6 +2307,29 @@ static int halt_bulk_in_endpoint(struct fsg_dev *fsg)
         return rc;
 }
 
+static int wedge_bulk_in_endpoint(struct fsg_dev *fsg)
+{
+        int     rc;
+
+        DBG(fsg, "bulk-in set wedge\n");
+        rc = usb_ep_set_wedge(fsg->bulk_in);
+        if (rc == -EAGAIN)
+                VDBG(fsg, "delayed bulk-in endpoint wedge\n");
+        while (rc != 0) {
+                if (rc != -EAGAIN) {
+                        WARN(fsg, "usb_ep_set_wedge -> %d\n", rc);
+                        rc = 0;
+                        break;
+                }
+
+                /* Wait for a short time and then try again */
+                if (msleep_interruptible(100) != 0)
+                        return -EINTR;
+                rc = usb_ep_set_wedge(fsg->bulk_in);
+        }
+        return rc;
+}
+
 static int pad_with_zeros(struct fsg_dev *fsg)
 {
         struct fsg_buffhd       *bh = fsg->next_buffhd_to_fill;
@@ -2957,7 +2980,7 @@ static int received_cbw(struct fsg_dev *fsg, struct fsg_buffhd *bh)
                  * We aren't required to halt the OUT endpoint; instead
                  * we can simply accept and discard any data received
                  * until the next reset. */
-                halt_bulk_in_endpoint(fsg);
+                wedge_bulk_in_endpoint(fsg);
                 set_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags);
                 return -EINVAL;
         }
diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c
new file mode 100644
index 000000000000..75eba202f737
--- /dev/null
+++ b/drivers/usb/gadget/pxa27x_udc.c
@@ -0,0 +1,2404 @@
+/*
+ * Handles the Intel 27x USB Device Controller (UDC)
+ *
+ * Inspired by original driver by Frank Becker, David Brownell, and others.
+ * Copyright (C) 2008 Robert Jarzmik
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/version.h>
+#include <linux/errno.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/proc_fs.h>
+#include <linux/clk.h>
+#include <linux/irq.h>
+
+#include <asm/byteorder.h>
+#include <asm/hardware.h>
+
+#include <linux/usb.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+
+#include <asm/arch/udc.h>
+
+#include "pxa27x_udc.h"
+
+/*
+ * This driver handles the USB Device Controller (UDC) in Intel's PXA 27x
+ * series processors.
+ *
+ * Such controller drivers work with a gadget driver.  The gadget driver
+ * returns descriptors, implements configuration and data protocols used
+ * by the host to interact with this device, and allocates endpoints to
+ * the different protocol interfaces.  The controller driver virtualizes
+ * usb hardware so that the gadget drivers will be more portable.
+ *
+ * This UDC hardware wants to implement a bit too much USB protocol. The
+ * biggest issues are:  that the endpoints have to be set up before the
+ * controller can be enabled (minor, and not uncommon); and each endpoint
+ * can only have one configuration, interface and alternative interface
+ * number (major, and very unusual). Once set up, these cannot be changed
+ * without a controller reset.
+ *
+ * The workaround is to setup all combinations necessary for the gadgets which
+ * will work with this driver. This is done in pxa_udc structure, statically.
+ * See pxa_udc, udc_usb_ep versus pxa_ep, and matching function find_pxa_ep.
+ * (You could modify this if needed.  Some drivers have a "fifo_mode" module
+ * parameter to facilitate such changes.)
+ *
+ * The combinations have been tested with these gadgets :
+ *  - zero gadget
+ *  - file storage gadget
+ *  - ether gadget
+ *
+ * The driver doesn't use DMA, only IO access and IRQ callbacks. No use is
+ * made of UDC's double buffering either. USB "On-The-Go" is not implemented.
+ *
+ * All the requests are handled the same way :
+ *  - the drivers tries to handle the request directly to the IO
+ *  - if the IO fifo is not big enough, the remaining is send/received in
+ *    interrupt handling.
+ */
+
+#define DRIVER_VERSION  "2008-04-18"
+#define DRIVER_DESC     "PXA 27x USB Device Controller driver"
+
+static const char driver_name[] = "pxa27x_udc";
+static struct pxa_udc *the_controller;
+
+static void handle_ep(struct pxa_ep *ep);
+
+/*
+ * Debug filesystem
+ */
+#ifdef CONFIG_USB_GADGET_DEBUG_FS
+
+#include <linux/debugfs.h>
+#include <linux/uaccess.h>
+#include <linux/seq_file.h>
+
+static int state_dbg_show(struct seq_file *s, void *p)
+{
+        struct pxa_udc *udc = s->private;
+        int pos = 0, ret;
+        u32 tmp;
+
+        ret = -ENODEV;
+        if (!udc->driver)
+                goto out;
+
+        /* basic device status */
+        pos += seq_printf(s, DRIVER_DESC "\n"
+                         "%s version: %s\nGadget driver: %s\n",
+                         driver_name, DRIVER_VERSION,
+                         udc->driver ? udc->driver->driver.name : "(none)");
+
+        tmp = udc_readl(udc, UDCCR);
+        pos += seq_printf(s,
+                         "udccr=0x%0x(%s%s%s%s%s%s%s%s%s%s), "
+                         "con=%d,inter=%d,altinter=%d\n", tmp,
+                         (tmp & UDCCR_OEN) ? " oen":"",
+                         (tmp & UDCCR_AALTHNP) ? " aalthnp":"",
+                         (tmp & UDCCR_AHNP) ? " rem" : "",
+                         (tmp & UDCCR_BHNP) ? " rstir" : "",
+                         (tmp & UDCCR_DWRE) ? " dwre" : "",
+                         (tmp & UDCCR_SMAC) ? " smac" : "",
+                         (tmp & UDCCR_EMCE) ? " emce" : "",
+                         (tmp & UDCCR_UDR) ? " udr" : "",
+                         (tmp & UDCCR_UDA) ? " uda" : "",
+                         (tmp & UDCCR_UDE) ? " ude" : "",
+                         (tmp & UDCCR_ACN) >> UDCCR_ACN_S,
+                         (tmp & UDCCR_AIN) >> UDCCR_AIN_S,
+                         (tmp & UDCCR_AAISN) >> UDCCR_AAISN_S);
+        /* registers for device and ep0 */
+        pos += seq_printf(s, "udcicr0=0x%08x udcicr1=0x%08x\n",
+                        udc_readl(udc, UDCICR0), udc_readl(udc, UDCICR1));
+        pos += seq_printf(s, "udcisr0=0x%08x udcisr1=0x%08x\n",
+                        udc_readl(udc, UDCISR0), udc_readl(udc, UDCISR1));
+        pos += seq_printf(s, "udcfnr=%d\n", udc_readl(udc, UDCFNR));
+        pos += seq_printf(s, "irqs: reset=%lu, suspend=%lu, resume=%lu, "
+                        "reconfig=%lu\n",
+                        udc->stats.irqs_reset, udc->stats.irqs_suspend,
+                        udc->stats.irqs_resume, udc->stats.irqs_reconfig);
+
+        ret = 0;
+out:
+        return ret;
+}
+
+static int queues_dbg_show(struct seq_file *s, void *p)
+{
+        struct pxa_udc *udc = s->private;
+        struct pxa_ep *ep;
+        struct pxa27x_request *req;
+        int pos = 0, i, maxpkt, ret;
+
+        ret = -ENODEV;
+        if (!udc->driver)
+                goto out;
+
+        /* dump endpoint queues */
+        for (i = 0; i < NR_PXA_ENDPOINTS; i++) {
+                ep = &udc->pxa_ep[i];
+                maxpkt = ep->fifo_size;
+                pos += seq_printf(s,  "%-12s max_pkt=%d %s\n",
+                                EPNAME(ep), maxpkt, "pio");
+
+                if (list_empty(&ep->queue)) {
+                        pos += seq_printf(s, "\t(nothing queued)\n");
+                        continue;
+                }
+
+                list_for_each_entry(req, &ep->queue, queue) {
+                        pos += seq_printf(s,  "\treq %p len %d/%d buf %p\n",
+                                        &req->req, req->req.actual,
+                                        req->req.length, req->req.buf);
+                }
+        }
+
+        ret = 0;
+out:
+        return ret;
+}
+
+static int eps_dbg_show(struct seq_file *s, void *p)
+{
+        struct pxa_udc *udc = s->private;
+        struct pxa_ep *ep;
+        int pos = 0, i, ret;
+        u32 tmp;
+
+        ret = -ENODEV;
+        if (!udc->driver)
+                goto out;
+
+        ep = &udc->pxa_ep[0];
+        tmp = udc_ep_readl(ep, UDCCSR);
+        pos += seq_printf(s, "udccsr0=0x%03x(%s%s%s%s%s%s%s)\n", tmp,
+                         (tmp & UDCCSR0_SA) ? " sa" : "",
+                         (tmp & UDCCSR0_RNE) ? " rne" : "",
+                         (tmp & UDCCSR0_FST) ? " fst" : "",
+                         (tmp & UDCCSR0_SST) ? " sst" : "",
+                         (tmp & UDCCSR0_DME) ? " dme" : "",
+                         (tmp & UDCCSR0_IPR) ? " ipr" : "",
+                         (tmp & UDCCSR0_OPC) ? " opc" : "");
+        for (i = 0; i < NR_PXA_ENDPOINTS; i++) {
+                ep = &udc->pxa_ep[i];
+                tmp = i? udc_ep_readl(ep, UDCCR) : udc_readl(udc, UDCCR);
+                pos += seq_printf(s, "%-12s: "
+                                "IN %lu(%lu reqs), OUT %lu(%lu reqs), "
+                                "irqs=%lu, udccr=0x%08x, udccsr=0x%03x, "
+                                "udcbcr=%d\n",
+                                EPNAME(ep),
+                                ep->stats.in_bytes, ep->stats.in_ops,
+                                ep->stats.out_bytes, ep->stats.out_ops,
+                                ep->stats.irqs,
+                                tmp, udc_ep_readl(ep, UDCCSR),
+                                udc_ep_readl(ep, UDCBCR));
+        }
+
+        ret = 0;
+out:
+        return ret;
+}
+
+static int eps_dbg_open(struct inode *inode, struct file *file)
+{
+        return single_open(file, eps_dbg_show, inode->i_private);
+}
+
+static int queues_dbg_open(struct inode *inode, struct file *file)
+{
+        return single_open(file, queues_dbg_show, inode->i_private);
+}
+
+static int state_dbg_open(struct inode *inode, struct file *file)
+{
+        return single_open(file, state_dbg_show, inode->i_private);
+}
+
+static const struct file_operations state_dbg_fops = {
+        .owner          = THIS_MODULE,
+        .open           = state_dbg_open,
+        .llseek         = seq_lseek,
+        .read           = seq_read,
+        .release        = single_release,
+};
+
+static const struct file_operations queues_dbg_fops = {
+        .owner          = THIS_MODULE,
+        .open           = queues_dbg_open,
+        .llseek         = seq_lseek,
+        .read           = seq_read,
+        .release        = single_release,
+};
+
+static const struct file_operations eps_dbg_fops = {
+        .owner          = THIS_MODULE,
+        .open           = eps_dbg_open,
+        .llseek         = seq_lseek,
+        .read           = seq_read,
+        .release        = single_release,
+};
+
+static void pxa_init_debugfs(struct pxa_udc *udc)
+{
+        struct dentry *root, *state, *queues, *eps;
+
+        root = debugfs_create_dir(udc->gadget.name, NULL);
+        if (IS_ERR(root) || !root)
+                goto err_root;
+
+        state = debugfs_create_file("udcstate", 0400, root, udc,
+                        &state_dbg_fops);
+        if (!state)
+                goto err_state;
+        queues = debugfs_create_file("queues", 0400, root, udc,
+                        &queues_dbg_fops);
+        if (!queues)
+                goto err_queues;
+        eps = debugfs_create_file("epstate", 0400, root, udc,
+                        &eps_dbg_fops);
+        if (!queues)
+                goto err_eps;
+
+        udc->debugfs_root = root;
+        udc->debugfs_state = state;
+        udc->debugfs_queues = queues;
+        udc->debugfs_eps = eps;
+        return;
+err_eps:
+        debugfs_remove(eps);
+err_queues:
+        debugfs_remove(queues);
+err_state:
+        debugfs_remove(root);
+err_root:
+        dev_err(udc->dev, "debugfs is not available\n");
+}
+
+static void pxa_cleanup_debugfs(struct pxa_udc *udc)
+{
+        debugfs_remove(udc->debugfs_eps);
+        debugfs_remove(udc->debugfs_queues);
+        debugfs_remove(udc->debugfs_state);
+        debugfs_remove(udc->debugfs_root);
+        udc->debugfs_eps = NULL;
+        udc->debugfs_queues = NULL;
+        udc->debugfs_state = NULL;
+        udc->debugfs_root = NULL;
+}
+
+#else
+static inline void pxa_init_debugfs(struct pxa_udc *udc)
+{
+}
+
+static inline void pxa_cleanup_debugfs(struct pxa_udc *udc)
+{
+}
+#endif
+
+/**
+ * is_match_usb_pxa - check if usb_ep and pxa_ep match
+ * @udc_usb_ep: usb endpoint
+ * @ep: pxa endpoint
+ * @config: configuration required in pxa_ep
+ * @interface: interface required in pxa_ep
+ * @altsetting: altsetting required in pxa_ep
+ *
+ * Returns 1 if all criteria match between pxa and usb endpoint, 0 otherwise
+ */
+static int is_match_usb_pxa(struct udc_usb_ep *udc_usb_ep, struct pxa_ep *ep,
+                int config, int interface, int altsetting)
+{
+        if (usb_endpoint_num(&udc_usb_ep->desc) != ep->addr)
+                return 0;
+        if (usb_endpoint_dir_in(&udc_usb_ep->desc) != ep->dir_in)
+                return 0;
+        if (usb_endpoint_type(&udc_usb_ep->desc) != ep->type)
+                return 0;
+        if ((ep->config != config) || (ep->interface != interface)
+                        || (ep->alternate != altsetting))
+                return 0;
+        return 1;
+}
+
+/**
+ * find_pxa_ep - find pxa_ep structure matching udc_usb_ep
+ * @udc: pxa udc
+ * @udc_usb_ep: udc_usb_ep structure
+ *
+ * Match udc_usb_ep and all pxa_ep available, to see if one matches.
+ * This is necessary because of the strong pxa hardware restriction requiring
+ * that once pxa endpoints are initialized, their configuration is freezed, and
+ * no change can be made to their address, direction, or in which configuration,
+ * interface or altsetting they are active ... which differs from more usual
+ * models which have endpoints be roughly just addressable fifos, and leave
+ * configuration events up to gadget drivers (like all control messages).
+ *
+ * Note that there is still a blurred point here :
+ *   - we rely on UDCCR register "active interface" and "active altsetting".
+ *     This is a nonsense in regard of USB spec, where multiple interfaces are
+ *     active at the same time.
+ *   - if we knew for sure that the pxa can handle multiple interface at the
+ *     same time, assuming Intel's Developer Guide is wrong, this function
+ *     should be reviewed, and a cache of couples (iface, altsetting) should
+ *     be kept in the pxa_udc structure. In this case this function would match
+ *     against the cache of couples instead of the "last altsetting" set up.
+ *
+ * Returns the matched pxa_ep structure or NULL if none found
+ */
+static struct pxa_ep *find_pxa_ep(struct pxa_udc *udc,
+                struct udc_usb_ep *udc_usb_ep)
+{
+        int i;
+        struct pxa_ep *ep;
+        int cfg = udc->config;
+        int iface = udc->last_interface;
+        int alt = udc->last_alternate;
+
+        if (udc_usb_ep == &udc->udc_usb_ep[0])
+                return &udc->pxa_ep[0];
+
+        for (i = 1; i < NR_PXA_ENDPOINTS; i++) {
+                ep = &udc->pxa_ep[i];
+                if (is_match_usb_pxa(udc_usb_ep, ep, cfg, iface, alt))
+                        return ep;
+        }
+        return NULL;
+}
+
+/**
+ * update_pxa_ep_matches - update pxa_ep cached values in all udc_usb_ep
+ * @udc: pxa udc
+ *
+ * Context: in_interrupt()
+ *
+ * Updates all pxa_ep fields in udc_usb_ep structures, if this field was
+ * previously set up (and is not NULL). The update is necessary is a
+ * configuration change or altsetting change was issued by the USB host.
+ */
+static void update_pxa_ep_matches(struct pxa_udc *udc)
+{
+        int i;
+        struct udc_usb_ep *udc_usb_ep;
+
+        for (i = 1; i < NR_USB_ENDPOINTS; i++) {
+                udc_usb_ep = &udc->udc_usb_ep[i];
+                if (udc_usb_ep->pxa_ep)
+                        udc_usb_ep->pxa_ep = find_pxa_ep(udc, udc_usb_ep);
+        }
+}
+
+/**
+ * pio_irq_enable - Enables irq generation for one endpoint
+ * @ep: udc endpoint
+ */
+static void pio_irq_enable(struct pxa_ep *ep)
+{
+        struct pxa_udc *udc = ep->dev;
+        int index = EPIDX(ep);
+        u32 udcicr0 = udc_readl(udc, UDCICR0);
+        u32 udcicr1 = udc_readl(udc, UDCICR1);
+
+        if (index < 16)
+                udc_writel(udc, UDCICR0, udcicr0 | (3 << (index * 2)));
+        else
+                udc_writel(udc, UDCICR1, udcicr1 | (3 << ((index - 16) * 2)));
+}
+
+/**
+ * pio_irq_disable - Disables irq generation for one endpoint
+ * @ep: udc endpoint
+ * @index: endpoint number
+ */
+static void pio_irq_disable(struct pxa_ep *ep)
+{
+        struct pxa_udc *udc = ep->dev;
+        int index = EPIDX(ep);
+        u32 udcicr0 = udc_readl(udc, UDCICR0);
+        u32 udcicr1 = udc_readl(udc, UDCICR1);
+
+        if (index < 16)
+                udc_writel(udc, UDCICR0, udcicr0 & ~(3 << (index * 2)));
+        else
+                udc_writel(udc, UDCICR1, udcicr1 & ~(3 << ((index - 16) * 2)));
+}
+
+/**
+ * udc_set_mask_UDCCR - set bits in UDCCR
+ * @udc: udc device
+ * @mask: bits to set in UDCCR
+ *
+ * Sets bits in UDCCR, leaving DME and FST bits as they were.
+ */
+static inline void udc_set_mask_UDCCR(struct pxa_udc *udc, int mask)
+{
+        u32 udccr = udc_readl(udc, UDCCR);
+        udc_writel(udc, UDCCR,
+                        (udccr & UDCCR_MASK_BITS) | (mask & UDCCR_MASK_BITS));
+}
+
+/**
+ * udc_clear_mask_UDCCR - clears bits in UDCCR
+ * @udc: udc device
+ * @mask: bit to clear in UDCCR
+ *
+ * Clears bits in UDCCR, leaving DME and FST bits as they were.
+ */
+static inline void udc_clear_mask_UDCCR(struct pxa_udc *udc, int mask)
+{
+        u32 udccr = udc_readl(udc, UDCCR);
+        udc_writel(udc, UDCCR,
+                        (udccr & UDCCR_MASK_BITS) & ~(mask & UDCCR_MASK_BITS));
+}
+
+/**
+ * ep_count_bytes_remain - get how many bytes in udc endpoint
+ * @ep: udc endpoint
+ *
+ * Returns number of bytes in OUT fifos. Broken for IN fifos (-EOPNOTSUPP)
+ */
+static int ep_count_bytes_remain(struct pxa_ep *ep)
+{
+        if (ep->dir_in)
+                return -EOPNOTSUPP;
+        return udc_ep_readl(ep, UDCBCR) & 0x3ff;
+}
+
+/**
+ * ep_is_empty - checks if ep has byte ready for reading
+ * @ep: udc endpoint
+ *
+ * If endpoint is the control endpoint, checks if there are bytes in the
+ * control endpoint fifo. If endpoint is a data endpoint, checks if bytes
+ * are ready for reading on OUT endpoint.
+ *
+ * Returns 0 if ep not empty, 1 if ep empty, -EOPNOTSUPP if IN endpoint
+ */
+static int ep_is_empty(struct pxa_ep *ep)
+{
+        int ret;
+
+        if (!is_ep0(ep) && ep->dir_in)
+                return -EOPNOTSUPP;
+        if (is_ep0(ep))
+                ret = !(udc_ep_readl(ep, UDCCSR) & UDCCSR0_RNE);
+        else
+                ret = !(udc_ep_readl(ep, UDCCSR) & UDCCSR_BNE);
+        return ret;
+}
+
+/**
+ * ep_is_full - checks if ep has place to write bytes
+ * @ep: udc endpoint
+ *
+ * If endpoint is not the control endpoint and is an IN endpoint, checks if
+ * there is place to write bytes into the endpoint.
+ *
+ * Returns 0 if ep not full, 1 if ep full, -EOPNOTSUPP if OUT endpoint
+ */
+static int ep_is_full(struct pxa_ep *ep)
+{
+        if (is_ep0(ep))
+                return (udc_ep_readl(ep, UDCCSR) & UDCCSR0_IPR);
+        if (!ep->dir_in)
+                return -EOPNOTSUPP;
+        return (!(udc_ep_readl(ep, UDCCSR) & UDCCSR_BNF));
+}
+
+/**
+ * epout_has_pkt - checks if OUT endpoint fifo has a packet available
+ * @ep: pxa endpoint
+ *
+ * Returns 1 if a complete packet is available, 0 if not, -EOPNOTSUPP for IN ep.
+ */
+static int epout_has_pkt(struct pxa_ep *ep)
+{
+        if (!is_ep0(ep) && ep->dir_in)
+                return -EOPNOTSUPP;
+        if (is_ep0(ep))
+                return (udc_ep_readl(ep, UDCCSR) & UDCCSR0_OPC);
+        return (udc_ep_readl(ep, UDCCSR) & UDCCSR_PC);
+}
+
+/**
+ * set_ep0state - Set ep0 automata state
+ * @dev: udc device
+ * @state: state
+ */
+static void set_ep0state(struct pxa_udc *udc, int state)
+{
+        struct pxa_ep *ep = &udc->pxa_ep[0];
+        char *old_stname = EP0_STNAME(udc);
+
+        udc->ep0state = state;
+        ep_dbg(ep, "state=%s->%s, udccsr0=0x%03x, udcbcr=%d\n", old_stname,
+                EP0_STNAME(udc), udc_ep_readl(ep, UDCCSR),
+                udc_ep_readl(ep, UDCBCR));
+}
+
+/**
+ * ep0_idle - Put control endpoint into idle state
+ * @dev: udc device
+ */
+static void ep0_idle(struct pxa_udc *dev)
+{
+        set_ep0state(dev, WAIT_FOR_SETUP);
+}
+
+/**
+ * inc_ep_stats_reqs - Update ep stats counts
+ * @ep: physical endpoint
+ * @req: usb request
+ * @is_in: ep direction (USB_DIR_IN or 0)
+ *
+ */
+static void inc_ep_stats_reqs(struct pxa_ep *ep, int is_in)
+{
+        if (is_in)
+                ep->stats.in_ops++;
+        else
+                ep->stats.out_ops++;
+}
+
+/**
+ * inc_ep_stats_bytes - Update ep stats counts
+ * @ep: physical endpoint
+ * @count: bytes transfered on endpoint
+ * @req: usb request
+ * @is_in: ep direction (USB_DIR_IN or 0)
+ */
+static void inc_ep_stats_bytes(struct pxa_ep *ep, int count, int is_in)
+{
+        if (is_in)
+                ep->stats.in_bytes += count;
+        else
+                ep->stats.out_bytes += count;
+}
+
+/**
+ * pxa_ep_setup - Sets up an usb physical endpoint
+ * @ep: pxa27x physical endpoint
+ *
+ * Find the physical pxa27x ep, and setup its UDCCR
+ */
+static __init void pxa_ep_setup(struct pxa_ep *ep)
+{
+        u32 new_udccr;
+
+        new_udccr = ((ep->config << UDCCONR_CN_S) & UDCCONR_CN)
+                | ((ep->interface << UDCCONR_IN_S) & UDCCONR_IN)
+                | ((ep->alternate << UDCCONR_AISN_S) & UDCCONR_AISN)
+                | ((EPADDR(ep) << UDCCONR_EN_S) & UDCCONR_EN)
+                | ((EPXFERTYPE(ep) << UDCCONR_ET_S) & UDCCONR_ET)
+                | ((ep->dir_in) ? UDCCONR_ED : 0)
+                | ((ep->fifo_size << UDCCONR_MPS_S) & UDCCONR_MPS)
+                | UDCCONR_EE;
+
+        udc_ep_writel(ep, UDCCR, new_udccr);
+}
+
+/**
+ * pxa_eps_setup - Sets up all usb physical endpoints
+ * @dev: udc device
+ *
+ * Setup all pxa physical endpoints, except ep0
+ */
+static __init void pxa_eps_setup(struct pxa_udc *dev)
+{
+        unsigned int i;
+
+        dev_dbg(dev->dev, "%s: dev=%p\n", __func__, dev);
+
+        for (i = 1; i < NR_PXA_ENDPOINTS; i++)
+                pxa_ep_setup(&dev->pxa_ep[i]);
+}
+
+/**
+ * pxa_ep_alloc_request - Allocate usb request
+ * @_ep: usb endpoint
+ * @gfp_flags:
+ *
+ * For the pxa27x, these can just wrap kmalloc/kfree.  gadget drivers
+ * must still pass correctly initialized endpoints, since other controller
+ * drivers may care about how it's currently set up (dma issues etc).
+  */
+static struct usb_request *
+pxa_ep_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags)
+{
+        struct pxa27x_request *req;
+
+        req = kzalloc(sizeof *req, gfp_flags);
+        if (!req || !_ep)
+                return NULL;
+
+        INIT_LIST_HEAD(&req->queue);
+        req->in_use = 0;
+        req->udc_usb_ep = container_of(_ep, struct udc_usb_ep, usb_ep);
+
+        return &req->req;
+}
+
+/**
+ * pxa_ep_free_request - Free usb request
+ * @_ep: usb endpoint
+ * @_req: usb request
+ *
+ * Wrapper around kfree to free _req
+ */
+static void pxa_ep_free_request(struct usb_ep *_ep, struct usb_request *_req)
+{
+        struct pxa27x_request *req;
+
+        req = container_of(_req, struct pxa27x_request, req);
+        WARN_ON(!list_empty(&req->queue));
+        kfree(req);
+}
+
+/**
+ * ep_add_request - add a request to the endpoint's queue
+ * @ep: usb endpoint
+ * @req: usb request
+ *
+ * Context: ep->lock held
+ *
+ * Queues the request in the endpoint's queue, and enables the interrupts
+ * on the endpoint.
+ */
+static void ep_add_request(struct pxa_ep *ep, struct pxa27x_request *req)
+{
+        if (unlikely(!req))
+                return;
+        ep_vdbg(ep, "req:%p, lg=%d, udccsr=0x%03x\n", req,
+                req->req.length, udc_ep_readl(ep, UDCCSR));
+
+        req->in_use = 1;
+        list_add_tail(&req->queue, &ep->queue);
+        pio_irq_enable(ep);
+}
+
+/**
+ * ep_del_request - removes a request from the endpoint's queue
+ * @ep: usb endpoint
+ * @req: usb request
+ *
+ * Context: ep->lock held
+ *
+ * Unqueue the request from the endpoint's queue. If there are no more requests
+ * on the endpoint, and if it's not the control endpoint, interrupts are
+ * disabled on the endpoint.
+ */
+static void ep_del_request(struct pxa_ep *ep, struct pxa27x_request *req)
+{
+        if (unlikely(!req))
+                return;
+        ep_vdbg(ep, "req:%p, lg=%d, udccsr=0x%03x\n", req,
+                req->req.length, udc_ep_readl(ep, UDCCSR));
+
+        list_del_init(&req->queue);
+        req->in_use = 0;
+        if (!is_ep0(ep) && list_empty(&ep->queue))
+                pio_irq_disable(ep);
+}
+
+/**
+ * req_done - Complete an usb request
+ * @ep: pxa physical endpoint
+ * @req: pxa request
+ * @status: usb request status sent to gadget API
+ *
+ * Context: ep->lock held
+ *
+ * Retire a pxa27x usb request. Endpoint must be locked.
+ */
+static void req_done(struct pxa_ep *ep, struct pxa27x_request *req, int status)
+{
+        ep_del_request(ep, req);
+        if (likely(req->req.status == -EINPROGRESS))
+                req->req.status = status;
+        else
+                status = req->req.status;
+
+        if (status && status != -ESHUTDOWN)
+                ep_dbg(ep, "complete req %p stat %d len %u/%u\n",
+                        &req->req, status,
+                        req->req.actual, req->req.length);
+
+        req->req.complete(&req->udc_usb_ep->usb_ep, &req->req);
+}
+
+/**
+ * ep_end_out_req - Ends control endpoint in request
+ * @ep: physical endpoint
+ * @req: pxa request
+ *
+ * Context: ep->lock held
+ *
+ * Ends endpoint in request (completes usb request).
+ */
+static void ep_end_out_req(struct pxa_ep *ep, struct pxa27x_request *req)
+{
+        inc_ep_stats_reqs(ep, !USB_DIR_IN);
+        req_done(ep, req, 0);
+}
+
+/**
+ * ep0_end_out_req - Ends control endpoint in request (ends data stage)
+ * @ep: physical endpoint
+ * @req: pxa request
+ *
+ * Context: ep->lock held
+ *
+ * Ends control endpoint in request (completes usb request), and puts
+ * control endpoint into idle state
+ */
+static void ep0_end_out_req(struct pxa_ep *ep, struct pxa27x_request *req)
+{
+        set_ep0state(ep->dev, OUT_STATUS_STAGE);
+        ep_end_out_req(ep, req);
+        ep0_idle(ep->dev);
+}
+
+/**
+ * ep_end_in_req - Ends endpoint out request
+ * @ep: physical endpoint
+ * @req: pxa request
+ *
+ * Context: ep->lock held
+ *
+ * Ends endpoint out request (completes usb request).
+ */
+static void ep_end_in_req(struct pxa_ep *ep, struct pxa27x_request *req)
+{
+        inc_ep_stats_reqs(ep, USB_DIR_IN);
+        req_done(ep, req, 0);
+}
+
+/**
+ * ep0_end_in_req - Ends control endpoint out request (ends data stage)
+ * @ep: physical endpoint
+ * @req: pxa request
+ *
+ * Context: ep->lock held
+ *
+ * Ends control endpoint out request (completes usb request), and puts
+ * control endpoint into status state
+ */
+static void ep0_end_in_req(struct pxa_ep *ep, struct pxa27x_request *req)
+{
+        struct pxa_udc *udc = ep->dev;
+
+        set_ep0state(udc, IN_STATUS_STAGE);
+        ep_end_in_req(ep, req);
+}
+
+/**
+ * nuke - Dequeue all requests
+ * @ep: pxa endpoint
+ * @status: usb request status
+ *
+ * Context: ep->lock held
+ *
+ * Dequeues all requests on an endpoint. As a side effect, interrupts will be
+ * disabled on that endpoint (because no more requests).
+ */
+static void nuke(struct pxa_ep *ep, int status)
+{
+        struct pxa27x_request *req;
+
+        while (!list_empty(&ep->queue)) {
+                req = list_entry(ep->queue.next, struct pxa27x_request, queue);
+                req_done(ep, req, status);
+        }
+}
+
+/**
+ * read_packet - transfer 1 packet from an OUT endpoint into request
+ * @ep: pxa physical endpoint
+ * @req: usb request
+ *
+ * Takes bytes from OUT endpoint and transfers them info the usb request.
+ * If there is less space in request than bytes received in OUT endpoint,
+ * bytes are left in the OUT endpoint.
+ *
+ * Returns how many bytes were actually transfered
+ */
+static int read_packet(struct pxa_ep *ep, struct pxa27x_request *req)
+{
+        u32 *buf;
+        int bytes_ep, bufferspace, count, i;
+
+        bytes_ep = ep_count_bytes_remain(ep);
+        bufferspace = req->req.length - req->req.actual;
+
+        buf = (u32 *)(req->req.buf + req->req.actual);
+        prefetchw(buf);
+
+        if (likely(!ep_is_empty(ep)))
+                count = min(bytes_ep, bufferspace);
+        else /* zlp */
+                count = 0;
+
+        for (i = count; i > 0; i -= 4)
+                *buf++ = udc_ep_readl(ep, UDCDR);
+        req->req.actual += count;
+
+        udc_ep_writel(ep, UDCCSR, UDCCSR_PC);
+
+        return count;
+}
+
+/**
+ * write_packet - transfer 1 packet from request into an IN endpoint
+ * @ep: pxa physical endpoint
+ * @req: usb request
+ * @max: max bytes that fit into endpoint
+ *
+ * Takes bytes from usb request, and transfers them into the physical
+ * endpoint. If there are no bytes to transfer, doesn't write anything
+ * to physical endpoint.
+ *
+ * Returns how many bytes were actually transfered.
+ */
+static int write_packet(struct pxa_ep *ep, struct pxa27x_request *req,
+                        unsigned int max)
+{
+        int length, count, remain, i;
+        u32 *buf;
+        u8 *buf_8;
+
+        buf = (u32 *)(req->req.buf + req->req.actual);
+        prefetch(buf);
+
+        length = min(req->req.length - req->req.actual, max);
+        req->req.actual += length;
+
+        remain = length & 0x3;
+        count = length & ~(0x3);
+        for (i = count; i > 0 ; i -= 4)
+                udc_ep_writel(ep, UDCDR, *buf++);
+
+        buf_8 = (u8 *)buf;
+        for (i = remain; i > 0; i--)
+                udc_ep_writeb(ep, UDCDR, *buf_8++);
+
+        ep_vdbg(ep, "length=%d+%d, udccsr=0x%03x\n", count, remain,
+                udc_ep_readl(ep, UDCCSR));
+
+        return length;
+}
+
+/**
+ * read_fifo - Transfer packets from OUT endpoint into usb request
+ * @ep: pxa physical endpoint
+ * @req: usb request
+ *
+ * Context: callable when in_interrupt()
+ *
+ * Unload as many packets as possible from the fifo we use for usb OUT
+ * transfers and put them into the request. Caller should have made sure
+ * there's at least one packet ready.
+ * Doesn't complete the request, that's the caller's job
+ *
+ * Returns 1 if the request completed, 0 otherwise
+ */
+static int read_fifo(struct pxa_ep *ep, struct pxa27x_request *req)
+{
+        int count, is_short, completed = 0;
+
+        while (epout_has_pkt(ep)) {
+                count = read_packet(ep, req);
+                inc_ep_stats_bytes(ep, count, !USB_DIR_IN);
+
+                is_short = (count < ep->fifo_size);
+                ep_dbg(ep, "read udccsr:%03x, count:%d bytes%s req %p %d/%d\n",
+                        udc_ep_readl(ep, UDCCSR), count, is_short ? "/S" : "",
+                        &req->req, req->req.actual, req->req.length);
+
+                /* completion */
+                if (is_short || req->req.actual == req->req.length) {
+                        completed = 1;
+                        break;
+                }
+                /* finished that packet.  the next one may be waiting... */
+        }
+        return completed;
+}
+
+/**
+ * write_fifo - transfer packets from usb request into an IN endpoint
+ * @ep: pxa physical endpoint
+ * @req: pxa usb request
+ *
+ * Write to an IN endpoint fifo, as many packets as possible.
+ * irqs will use this to write the rest later.
+ * caller guarantees at least one packet buffer is ready (or a zlp).
+ * Doesn't complete the request, that's the caller's job
+ *
+ * Returns 1 if request fully transfered, 0 if partial transfer
+ */
+static int write_fifo(struct pxa_ep *ep, struct pxa27x_request *req)
+{
+        unsigned max;
+        int count, is_short, is_last = 0, completed = 0, totcount = 0;
+        u32 udccsr;
+
+        max = ep->fifo_size;
+        do {
+                is_short = 0;
+
+                udccsr = udc_ep_readl(ep, UDCCSR);
+                if (udccsr & UDCCSR_PC) {
+                        ep_vdbg(ep, "Clearing Transmit Complete, udccsr=%x\n",
+                                udccsr);
+                        udc_ep_writel(ep, UDCCSR, UDCCSR_PC);
+                }
+                if (udccsr & UDCCSR_TRN) {
+                        ep_vdbg(ep, "Clearing Underrun on, udccsr=%x\n",
+                                udccsr);
+                        udc_ep_writel(ep, UDCCSR, UDCCSR_TRN);
+                }
+
+                count = write_packet(ep, req, max);
+                inc_ep_stats_bytes(ep, count, USB_DIR_IN);
+                totcount += count;
+
+                /* last packet is usually short (or a zlp) */
+                if (unlikely(count < max)) {
+                        is_last = 1;
+                        is_short = 1;
+                } else {
+                        if (likely(req->req.length > req->req.actual)
+                                        || req->req.zero)
+                                is_last = 0;
+                        else
+                                is_last = 1;
+                        /* interrupt/iso maxpacket may not fill the fifo */
+                        is_short = unlikely(max < ep->fifo_size);
+                }
+
+                if (is_short)
+                        udc_ep_writel(ep, UDCCSR, UDCCSR_SP);
+
+                /* requests complete when all IN data is in the FIFO */
+                if (is_last) {
+                        completed = 1;
+                        break;
+                }
+        } while (!ep_is_full(ep));
+
+        ep_dbg(ep, "wrote count:%d bytes%s%s, left:%d req=%p\n",
+                        totcount, is_last ? "/L" : "", is_short ? "/S" : "",
+                        req->req.length - req->req.actual, &req->req);
+
+        return completed;
+}
+
+/**
+ * read_ep0_fifo - Transfer packets from control endpoint into usb request
+ * @ep: control endpoint
+ * @req: pxa usb request
+ *
+ * Special ep0 version of the above read_fifo. Reads as many bytes from control
+ * endpoint as can be read, and stores them into usb request (limited by request
+ * maximum length).
+ *
+ * Returns 0 if usb request only partially filled, 1 if fully filled
+ */
+static int read_ep0_fifo(struct pxa_ep *ep, struct pxa27x_request *req)
+{
+        int count, is_short, completed = 0;
+
+        while (epout_has_pkt(ep)) {
+                count = read_packet(ep, req);
+                udc_ep_writel(ep, UDCCSR, UDCCSR0_OPC);
+                inc_ep_stats_bytes(ep, count, !USB_DIR_IN);
+
+                is_short = (count < ep->fifo_size);
+                ep_dbg(ep, "read udccsr:%03x, count:%d bytes%s req %p %d/%d\n",
+                        udc_ep_readl(ep, UDCCSR), count, is_short ? "/S" : "",
+                        &req->req, req->req.actual, req->req.length);
+
+                if (is_short || req->req.actual >= req->req.length) {
+                        completed = 1;
+                        break;
+                }
+        }
+
+        return completed;
+}
+
+/**
+ * write_ep0_fifo - Send a request to control endpoint (ep0 in)
+ * @ep: control endpoint
+ * @req: request
+ *
+ * Context: callable when in_interrupt()
+ *
+ * Sends a request (or a part of the request) to the control endpoint (ep0 in).
+ * If the request doesn't fit, the remaining part will be sent from irq.
+ * The request is considered fully written only if either :
+ *   - last write transfered all remaining bytes, but fifo was not fully filled
+ *   - last write was a 0 length write
+ *
+ * Returns 1 if request fully written, 0 if request only partially sent
+ */
+static int write_ep0_fifo(struct pxa_ep *ep, struct pxa27x_request *req)
+{
+        unsigned        count;
+        int             is_last, is_short;
+
+        count = write_packet(ep, req, EP0_FIFO_SIZE);
+        inc_ep_stats_bytes(ep, count, USB_DIR_IN);
+
+        is_short = (count < EP0_FIFO_SIZE);
+        is_last = ((count == 0) || (count < EP0_FIFO_SIZE));
+
+        /* Sends either a short packet or a 0 length packet */
+        if (unlikely(is_short))
+                udc_ep_writel(ep, UDCCSR, UDCCSR0_IPR);
+
+        ep_dbg(ep, "in %d bytes%s%s, %d left, req=%p, udccsr0=0x%03x\n",
+                count, is_short ? "/S" : "", is_last ? "/L" : "",
+                req->req.length - req->req.actual,
+                &req->req, udc_ep_readl(ep, UDCCSR));
+
+        return is_last;
+}
+
+/**
+ * pxa_ep_queue - Queue a request into an IN endpoint
+ * @_ep: usb endpoint
+ * @_req: usb request
+ * @gfp_flags: flags
+ *
+ * Context: normally called when !in_interrupt, but callable when in_interrupt()
+ * in the special case of ep0 setup :
+ *   (irq->handle_ep0_ctrl_req->gadget_setup->pxa_ep_queue)
+ *
+ * Returns 0 if succedeed, error otherwise
+ */
+static int pxa_ep_queue(struct usb_ep *_ep, struct usb_request *_req,
+                        gfp_t gfp_flags)
+{
+        struct udc_usb_ep       *udc_usb_ep;
+        struct pxa_ep           *ep;
+        struct pxa27x_request   *req;
+        struct pxa_udc          *dev;
+        unsigned long           flags;
+        int                     rc = 0;
+        int                     is_first_req;
+        unsigned                length;
+
+        req = container_of(_req, struct pxa27x_request, req);
+        udc_usb_ep = container_of(_ep, struct udc_usb_ep, usb_ep);
+
+        if (unlikely(!_req || !_req->complete || !_req->buf))
+                return -EINVAL;
+
+        if (unlikely(!_ep))
+                return -EINVAL;
+
+        dev = udc_usb_ep->dev;
+        ep = udc_usb_ep->pxa_ep;
+        if (unlikely(!ep))
+                return -EINVAL;
+
+        dev = ep->dev;
+        if (unlikely(!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)) {
+                ep_dbg(ep, "bogus device state\n");
+                return -ESHUTDOWN;
+        }
+
+        /* iso is always one packet per request, that's the only way
+         * we can report per-packet status.  that also helps with dma.
+         */
+        if (unlikely(EPXFERTYPE_is_ISO(ep)
+                        && req->req.length > ep->fifo_size))
+                return -EMSGSIZE;
+
+        spin_lock_irqsave(&ep->lock, flags);
+
+        is_first_req = list_empty(&ep->queue);
+        ep_dbg(ep, "queue req %p(first=%s), len %d buf %p\n",
+                        _req, is_first_req ? "yes" : "no",
+                        _req->length, _req->buf);
+
+        if (!ep->enabled) {
+                _req->status = -ESHUTDOWN;
+                rc = -ESHUTDOWN;
+                goto out;
+        }
+
+        if (req->in_use) {
+                ep_err(ep, "refusing to queue req %p (already queued)\n", req);
+                goto out;
+        }
+
+        length = _req->length;
+        _req->status = -EINPROGRESS;
+        _req->actual = 0;
+
+        ep_add_request(ep, req);
+
+        if (is_ep0(ep)) {
+                switch (dev->ep0state) {
+                case WAIT_ACK_SET_CONF_INTERF:
+                        if (length == 0) {
+                                ep_end_in_req(ep, req);
+                        } else {
+                                ep_err(ep, "got a request of %d bytes while"
+                                        "in state WATI_ACK_SET_CONF_INTERF\n",
+                                        length);
+                                ep_del_request(ep, req);
+                                rc = -EL2HLT;
+                        }
+                        ep0_idle(ep->dev);
+                        break;
+                case IN_DATA_STAGE:
+                        if (!ep_is_full(ep))
+                                if (write_ep0_fifo(ep, req))
+                                        ep0_end_in_req(ep, req);
+                        break;
+                case OUT_DATA_STAGE:
+                        if ((length == 0) || !epout_has_pkt(ep))
+                                if (read_ep0_fifo(ep, req))
+                                        ep0_end_out_req(ep, req);
+                        break;
+                default:
+                        ep_err(ep, "odd state %s to send me a request\n",
+                                EP0_STNAME(ep->dev));
+                        ep_del_request(ep, req);
+                        rc = -EL2HLT;
+                        break;
+                }
+        } else {
+                handle_ep(ep);
+        }
+
+out:
+        spin_unlock_irqrestore(&ep->lock, flags);
+        return rc;
+}
+
+/**
+ * pxa_ep_dequeue - Dequeue one request
+ * @_ep: usb endpoint
+ * @_req: usb request
+ *
+ * Return 0 if no error, -EINVAL or -ECONNRESET otherwise
+ */
+static int pxa_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
+{
+        struct pxa_ep           *ep;
+        struct udc_usb_ep       *udc_usb_ep;
+        struct pxa27x_request   *req;
+        unsigned long           flags;
+        int                     rc;
+
+        if (!_ep)
+                return -EINVAL;
+        udc_usb_ep = container_of(_ep, struct udc_usb_ep, usb_ep);
+        ep = udc_usb_ep->pxa_ep;
+        if (!ep || is_ep0(ep))
+                return -EINVAL;
+
+        spin_lock_irqsave(&ep->lock, flags);
+
+        /* make sure it's actually queued on this endpoint */
+        list_for_each_entry(req, &ep->queue, queue) {
+                if (&req->req == _req)
+                        break;
+        }
+
+        rc = -EINVAL;
+        if (&req->req != _req)
+                goto out;
+
+        rc = 0;
+        req_done(ep, req, -ECONNRESET);
+out:
+        spin_unlock_irqrestore(&ep->lock, flags);
+        return rc;
+}
+
+/**
+ * pxa_ep_set_halt - Halts operations on one endpoint
+ * @_ep: usb endpoint
+ * @value:
+ *
+ * Returns 0 if no error, -EINVAL, -EROFS, -EAGAIN otherwise
+ */
+static int pxa_ep_set_halt(struct usb_ep *_ep, int value)
+{
+        struct pxa_ep           *ep;
+        struct udc_usb_ep       *udc_usb_ep;
+        unsigned long flags;
+        int rc;
+
+
+        if (!_ep)
+                return -EINVAL;
+        udc_usb_ep = container_of(_ep, struct udc_usb_ep, usb_ep);
+        ep = udc_usb_ep->pxa_ep;
+        if (!ep || is_ep0(ep))
+                return -EINVAL;
+
+        if (value == 0) {
+                /*
+                 * This path (reset toggle+halt) is needed to implement
+                 * SET_INTERFACE on normal hardware.  but it can't be
+                 * done from software on the PXA UDC, and the hardware
+                 * forgets to do it as part of SET_INTERFACE automagic.
+                 */
+                ep_dbg(ep, "only host can clear halt\n");
+                return -EROFS;
+        }
+
+        spin_lock_irqsave(&ep->lock, flags);
+
+        rc = -EAGAIN;
+        if (ep->dir_in  && (ep_is_full(ep) || !list_empty(&ep->queue)))
+                goto out;
+
+        /* FST, FEF bits are the same for control and non control endpoints */
+        rc = 0;
+        udc_ep_writel(ep, UDCCSR, UDCCSR_FST | UDCCSR_FEF);
+        if (is_ep0(ep))
+                set_ep0state(ep->dev, STALL);
+
+out:
+        spin_unlock_irqrestore(&ep->lock, flags);
+        return rc;
+}
+
+/**
+ * pxa_ep_fifo_status - Get how many bytes in physical endpoint
+ * @_ep: usb endpoint
+ *
+ * Returns number of bytes in OUT fifos. Broken for IN fifos.
+ */
+static int pxa_ep_fifo_status(struct usb_ep *_ep)
+{
+        struct pxa_ep           *ep;
+        struct udc_usb_ep       *udc_usb_ep;
+
+        if (!_ep)
+                return -ENODEV;
+        udc_usb_ep = container_of(_ep, struct udc_usb_ep, usb_ep);
+        ep = udc_usb_ep->pxa_ep;
+        if (!ep || is_ep0(ep))
+                return -ENODEV;
+
+        if (ep->dir_in)
+                return -EOPNOTSUPP;
+        if (ep->dev->gadget.speed == USB_SPEED_UNKNOWN || ep_is_empty(ep))
+                return 0;
+        else
+                return ep_count_bytes_remain(ep) + 1;
+}
+
+/**
+ * pxa_ep_fifo_flush - Flushes one endpoint
+ * @_ep: usb endpoint
+ *
+ * Discards all data in one endpoint(IN or OUT), except control endpoint.
+ */
+static void pxa_ep_fifo_flush(struct usb_ep *_ep)
+{
+        struct pxa_ep           *ep;
+        struct udc_usb_ep       *udc_usb_ep;
+        unsigned long           flags;
+
+        if (!_ep)
+                return;
+        udc_usb_ep = container_of(_ep, struct udc_usb_ep, usb_ep);
+        ep = udc_usb_ep->pxa_ep;
+        if (!ep || is_ep0(ep))
+                return;
+
+        spin_lock_irqsave(&ep->lock, flags);
+
+        if (unlikely(!list_empty(&ep->queue)))
+                ep_dbg(ep, "called while queue list not empty\n");
+        ep_dbg(ep, "called\n");
+
+        /* for OUT, just read and discard the FIFO contents. */
+        if (!ep->dir_in) {
+                while (!ep_is_empty(ep))
+                        udc_ep_readl(ep, UDCDR);
+        } else {
+                /* most IN status is the same, but ISO can't stall */
+                udc_ep_writel(ep, UDCCSR,
+                                UDCCSR_PC | UDCCSR_FEF | UDCCSR_TRN
+                                | (EPXFERTYPE_is_ISO(ep) ? 0 : UDCCSR_SST));
+        }
+
+        spin_unlock_irqrestore(&ep->lock, flags);
+
+        return;
+}
+
+/**
+ * pxa_ep_enable - Enables usb endpoint
+ * @_ep: usb endpoint
+ * @desc: usb endpoint descriptor
+ *
+ * Nothing much to do here, as ep configuration is done once and for all
+ * before udc is enabled. After udc enable, no physical endpoint configuration
+ * can be changed.
+ * Function makes sanity checks and flushes the endpoint.
+ */
+static int pxa_ep_enable(struct usb_ep *_ep,
+        const struct usb_endpoint_descriptor *desc)
+{
+        struct pxa_ep           *ep;
+        struct udc_usb_ep       *udc_usb_ep;
+        struct pxa_udc          *udc;
+
+        if (!_ep || !desc)
+                return -EINVAL;
+
+        udc_usb_ep = container_of(_ep, struct udc_usb_ep, usb_ep);
+        if (udc_usb_ep->pxa_ep) {
+                ep = udc_usb_ep->pxa_ep;
+                ep_warn(ep, "usb_ep %s already enabled, doing nothing\n",
+                        _ep->name);
+        } else {
+                ep = find_pxa_ep(udc_usb_ep->dev, udc_usb_ep);
+        }
+
+        if (!ep || is_ep0(ep)) {
+                dev_err(udc_usb_ep->dev->dev,
+                        "unable to match pxa_ep for ep %s\n",
+                        _ep->name);
+                return -EINVAL;
+        }
+
+        if ((desc->bDescriptorType != USB_DT_ENDPOINT)
+                        || (ep->type != usb_endpoint_type(desc))) {
+                ep_err(ep, "type mismatch\n");
+                return -EINVAL;
+        }
+
+        if (ep->fifo_size < le16_to_cpu(desc->wMaxPacketSize)) {
+                ep_err(ep, "bad maxpacket\n");
+                return -ERANGE;
+        }
+
+        udc_usb_ep->pxa_ep = ep;
+        udc = ep->dev;
+
+        if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN) {
+                ep_err(ep, "bogus device state\n");
+                return -ESHUTDOWN;
+        }
+
+        ep->enabled = 1;
+
+        /* flush fifo (mostly for OUT buffers) */
+        pxa_ep_fifo_flush(_ep);
+
+        ep_dbg(ep, "enabled\n");
+        return 0;
+}
+
+/**
+ * pxa_ep_disable - Disable usb endpoint
+ * @_ep: usb endpoint
+ *
+ * Same as for pxa_ep_enable, no physical endpoint configuration can be
+ * changed.
+ * Function flushes the endpoint and related requests.
+ */
+static int pxa_ep_disable(struct usb_ep *_ep)
+{
+        struct pxa_ep           *ep;
+        struct udc_usb_ep       *udc_usb_ep;
+        unsigned long           flags;
+
+        if (!_ep)
+                return -EINVAL;
+
+        udc_usb_ep = container_of(_ep, struct udc_usb_ep, usb_ep);
+        ep = udc_usb_ep->pxa_ep;
+        if (!ep || is_ep0(ep) || !list_empty(&ep->queue))
+                return -EINVAL;
+
+        spin_lock_irqsave(&ep->lock, flags);
+        ep->enabled = 0;
+        nuke(ep, -ESHUTDOWN);
+        spin_unlock_irqrestore(&ep->lock, flags);
+
+        pxa_ep_fifo_flush(_ep);
+        udc_usb_ep->pxa_ep = NULL;
+
+        ep_dbg(ep, "disabled\n");
+        return 0;
+}
+
+static struct usb_ep_ops pxa_ep_ops = {
+        .enable         = pxa_ep_enable,
+        .disable        = pxa_ep_disable,
+
+        .alloc_request  = pxa_ep_alloc_request,
+        .free_request   = pxa_ep_free_request,
+
+        .queue          = pxa_ep_queue,
+        .dequeue        = pxa_ep_dequeue,
+
+        .set_halt       = pxa_ep_set_halt,
+        .fifo_status    = pxa_ep_fifo_status,
+        .fifo_flush     = pxa_ep_fifo_flush,
+};
+
+
+/**
+ * pxa_udc_get_frame - Returns usb frame number
+ * @_gadget: usb gadget
+ */
+static int pxa_udc_get_frame(struct usb_gadget *_gadget)
+{
+        struct pxa_udc *udc = to_gadget_udc(_gadget);
+
+        return (udc_readl(udc, UDCFNR) & 0x7ff);
+}
+
+/**
+ * pxa_udc_wakeup - Force udc device out of suspend
+ * @_gadget: usb gadget
+ *
+ * Returns 0 if succesfull, error code otherwise
+ */
+static int pxa_udc_wakeup(struct usb_gadget *_gadget)
+{
+        struct pxa_udc *udc = to_gadget_udc(_gadget);
+
+        /* host may not have enabled remote wakeup */
+        if ((udc_readl(udc, UDCCR) & UDCCR_DWRE) == 0)
+                return -EHOSTUNREACH;
+        udc_set_mask_UDCCR(udc, UDCCR_UDR);
+        return 0;
+}
+
+static const struct usb_gadget_ops pxa_udc_ops = {
+        .get_frame      = pxa_udc_get_frame,
+        .wakeup         = pxa_udc_wakeup,
+        /* current versions must always be self-powered */
+};
+
+/**
+ * udc_disable - disable udc device controller
+ * @udc: udc device
+ *
+ * Disables the udc device : disables clocks, udc interrupts, control endpoint
+ * interrupts.
+ */
+static void udc_disable(struct pxa_udc *udc)
+{
+        udc_writel(udc, UDCICR0, 0);
+        udc_writel(udc, UDCICR1, 0);
+
+        udc_clear_mask_UDCCR(udc, UDCCR_UDE);
+        clk_disable(udc->clk);
+
+        ep0_idle(udc);
+        udc->gadget.speed = USB_SPEED_UNKNOWN;
+        udc->mach->udc_command(PXA2XX_UDC_CMD_DISCONNECT);
+}
+
+/**
+ * udc_init_data - Initialize udc device data structures
+ * @dev: udc device
+ *
+ * Initializes gadget endpoint list, endpoints locks. No action is taken
+ * on the hardware.
+ */
+static __init void udc_init_data(struct pxa_udc *dev)
+{
+        int i;
+        struct pxa_ep *ep;
+
+        /* device/ep0 records init */
+        INIT_LIST_HEAD(&dev->gadget.ep_list);
+        INIT_LIST_HEAD(&dev->gadget.ep0->ep_list);
+        dev->udc_usb_ep[0].pxa_ep = &dev->pxa_ep[0];
+        ep0_idle(dev);
+        strcpy(dev->dev->bus_id, "");
+
+        /* PXA endpoints init */
+        for (i = 0; i < NR_PXA_ENDPOINTS; i++) {
+                ep = &dev->pxa_ep[i];
+
+                ep->enabled = is_ep0(ep);
+                INIT_LIST_HEAD(&ep->queue);
+                spin_lock_init(&ep->lock);
+        }
+
+        /* USB endpoints init */
+        for (i = 0; i < NR_USB_ENDPOINTS; i++)
+                if (i != 0)
+                        list_add_tail(&dev->udc_usb_ep[i].usb_ep.ep_list,
+                                        &dev->gadget.ep_list);
+}
+
+/**
+ * udc_enable - Enables the udc device
+ * @dev: udc device
+ *
+ * Enables the udc device : enables clocks, udc interrupts, control endpoint
+ * interrupts, sets usb as UDC client and setups endpoints.
+ */
+static void udc_enable(struct pxa_udc *udc)
+{
+        udc_writel(udc, UDCICR0, 0);
+        udc_writel(udc, UDCICR1, 0);
+        udc_writel(udc, UP2OCR, UP2OCR_HXOE);
+        udc_clear_mask_UDCCR(udc, UDCCR_UDE);
+
+        clk_enable(udc->clk);
+
+        ep0_idle(udc);
+        udc->gadget.speed = USB_SPEED_FULL;
+        memset(&udc->stats, 0, sizeof(udc->stats));
+
+        udc_set_mask_UDCCR(udc, UDCCR_UDE);
+        udelay(2);
+        if (udc_readl(udc, UDCCR) & UDCCR_EMCE)
+                dev_err(udc->dev, "Configuration errors, udc disabled\n");
+
+        /*
+         * Caller must be able to sleep in order to cope with startup transients
+         */
+        msleep(100);
+
+        /* enable suspend/resume and reset irqs */
+        udc_writel(udc, UDCICR1,
+                        UDCICR1_IECC | UDCICR1_IERU
+                        | UDCICR1_IESU | UDCICR1_IERS);
+
+        /* enable ep0 irqs */
+        pio_irq_enable(&udc->pxa_ep[0]);
+
+        dev_info(udc->dev, "UDC connecting\n");
+        if (udc->mach->udc_command)
+                udc->mach->udc_command(PXA2XX_UDC_CMD_CONNECT);
+}
+
+/**
+ * usb_gadget_register_driver - Register gadget driver
+ * @driver: gadget driver
+ *
+ * When a driver is successfully registered, it will receive control requests
+ * including set_configuration(), which enables non-control requests.  Then
+ * usb traffic follows until a disconnect is reported.  Then a host may connect
+ * again, or the driver might get unbound.
+ *
+ * Returns 0 if no error, -EINVAL, -ENODEV, -EBUSY otherwise
+ */
+int usb_gadget_register_driver(struct usb_gadget_driver *driver)
+{
+        struct pxa_udc *udc = the_controller;
+        int retval;
+
+        if (!driver || driver->speed != USB_SPEED_FULL || !driver->bind
+                        || !driver->disconnect || !driver->setup)
+                return -EINVAL;
+        if (!udc)
+                return -ENODEV;
+        if (udc->driver)
+                return -EBUSY;
+
+        /* first hook up the driver ... */
+        udc->driver = driver;
+        udc->gadget.dev.driver = &driver->driver;
+
+        retval = device_add(&udc->gadget.dev);
+        if (retval) {
+                dev_err(udc->dev, "device_add error %d\n", retval);
+                goto add_fail;
+        }
+        retval = driver->bind(&udc->gadget);
+        if (retval) {
+                dev_err(udc->dev, "bind to driver %s --> error %d\n",
+                        driver->driver.name, retval);
+                goto bind_fail;
+        }
+        dev_dbg(udc->dev, "registered gadget driver '%s'\n",
+                driver->driver.name);
+
+        udc_enable(udc);
+        return 0;
+
+bind_fail:
+        device_del(&udc->gadget.dev);
+add_fail:
+        udc->driver = NULL;
+        udc->gadget.dev.driver = NULL;
+        return retval;
+}
+EXPORT_SYMBOL(usb_gadget_register_driver);
+
+
+/**
+ * stop_activity - Stops udc endpoints
+ * @udc: udc device
+ * @driver: gadget driver
+ *
+ * Disables all udc endpoints (even control endpoint), report disconnect to
+ * the gadget user.
+ */
+static void stop_activity(struct pxa_udc *udc, struct usb_gadget_driver *driver)
+{
+        int i;
+
+        /* don't disconnect drivers more than once */
+        if (udc->gadget.speed == USB_SPEED_UNKNOWN)
+                driver = NULL;
+        udc->gadget.speed = USB_SPEED_UNKNOWN;
+
+        for (i = 0; i < NR_USB_ENDPOINTS; i++)
+                pxa_ep_disable(&udc->udc_usb_ep[i].usb_ep);
+
+        if (driver)
+                driver->disconnect(&udc->gadget);
+}
+
+/**
+ * usb_gadget_unregister_driver - Unregister the gadget driver
+ * @driver: gadget driver
+ *
+ * Returns 0 if no error, -ENODEV, -EINVAL otherwise
+ */
+int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
+{
+        struct pxa_udc *udc = the_controller;
+
+        if (!udc)
+                return -ENODEV;
+        if (!driver || driver != udc->driver || !driver->unbind)
+                return -EINVAL;
+
+        stop_activity(udc, driver);
+        udc_disable(udc);
+
+        driver->unbind(&udc->gadget);
+        udc->driver = NULL;
+
+        device_del(&udc->gadget.dev);
+
+        dev_info(udc->dev, "unregistered gadget driver '%s'\n",
+                 driver->driver.name);
+        return 0;
+}
+EXPORT_SYMBOL(usb_gadget_unregister_driver);
+
+/**
+ * handle_ep0_ctrl_req - handle control endpoint control request
+ * @udc: udc device
+ * @req: control request
+ */
+static void handle_ep0_ctrl_req(struct pxa_udc *udc,
+                                struct pxa27x_request *req)
+{
+        struct pxa_ep *ep = &udc->pxa_ep[0];
+        union {
+                struct usb_ctrlrequest  r;
+                u32                     word[2];
+        } u;
+        int i;
+        int have_extrabytes = 0;
+
+        nuke(ep, -EPROTO);
+
+        /* read SETUP packet */
+        for (i = 0; i < 2; i++) {
+                if (unlikely(ep_is_empty(ep)))
+                        goto stall;
+                u.word[i] = udc_ep_readl(ep, UDCDR);
+        }
+
+        have_extrabytes = !ep_is_empty(ep);
+        while (!ep_is_empty(ep)) {
+                i = udc_ep_readl(ep, UDCDR);
+                ep_err(ep, "wrong to have extra bytes for setup : 0x%08x\n", i);
+        }
+
+        le16_to_cpus(&u.r.wValue);
+        le16_to_cpus(&u.r.wIndex);
+        le16_to_cpus(&u.r.wLength);
+
+        ep_dbg(ep, "SETUP %02x.%02x v%04x i%04x l%04x\n",
+                u.r.bRequestType, u.r.bRequest,
+                u.r.wValue, u.r.wIndex, u.r.wLength);
+        if (unlikely(have_extrabytes))
+                goto stall;
+
+        if (u.r.bRequestType & USB_DIR_IN)
+                set_ep0state(udc, IN_DATA_STAGE);
+        else
+                set_ep0state(udc, OUT_DATA_STAGE);
+
+        /* Tell UDC to enter Data Stage */
+        udc_ep_writel(ep, UDCCSR, UDCCSR0_SA | UDCCSR0_OPC);
+
+        i = udc->driver->setup(&udc->gadget, &u.r);
+        if (i < 0)
+                goto stall;
+out:
+        return;
+stall:
+        ep_dbg(ep, "protocol STALL, udccsr0=%03x err %d\n",
+                udc_ep_readl(ep, UDCCSR), i);
+        udc_ep_writel(ep, UDCCSR, UDCCSR0_FST | UDCCSR0_FTF);
+        set_ep0state(udc, STALL);
+        goto out;
+}
+
+/**
+ * handle_ep0 - Handle control endpoint data transfers
+ * @udc: udc device
+ * @fifo_irq: 1 if triggered by fifo service type irq
+ * @opc_irq: 1 if triggered by output packet complete type irq
+ *
+ * Context : when in_interrupt() or with ep->lock held
+ *
+ * Tries to transfer all pending request data into the endpoint and/or
+ * transfer all pending data in the endpoint into usb requests.
+ * Handles states of ep0 automata.
+ *
+ * PXA27x hardware handles several standard usb control requests without
+ * driver notification.  The requests fully handled by hardware are :
+ *  SET_ADDRESS, SET_FEATURE, CLEAR_FEATURE, GET_CONFIGURATION, GET_INTERFACE,
+ *  GET_STATUS
+ * The requests handled by hardware, but with irq notification are :
+ *  SYNCH_FRAME, SET_CONFIGURATION, SET_INTERFACE
+ * The remaining standard requests really handled by handle_ep0 are :
+ *  GET_DESCRIPTOR, SET_DESCRIPTOR, specific requests.
+ * Requests standardized outside of USB 2.0 chapter 9 are handled more
+ * uniformly, by gadget drivers.
+ *
+ * The control endpoint state machine is _not_ USB spec compliant, it's even
+ * hardly compliant with Intel PXA270 developers guide.
+ * The key points which inferred this state machine are :
+ *   - on every setup token, bit UDCCSR0_SA is raised and held until cleared by
+ *     software.
+ *   - on every OUT packet received, UDCCSR0_OPC is raised and held until
+ *     cleared by software.
+ *   - clearing UDCCSR0_OPC always flushes ep0. If in setup stage, never do it
+ *     before reading ep0.
+ *   - irq can be called on a "packet complete" event (opc_irq=1), while
+ *     UDCCSR0_OPC is not yet raised (delta can be as big as 100ms
+ *     from experimentation).
+ *   - as UDCCSR0_SA can be activated while in irq handling, and clearing
+ *     UDCCSR0_OPC would flush the setup data, we almost never clear UDCCSR0_OPC
+ *     => we never actually read the "status stage" packet of an IN data stage
+ *     => this is not documented in Intel documentation
+ *   - hardware as no idea of STATUS STAGE, it only handle SETUP STAGE and DATA
+ *     STAGE. The driver add STATUS STAGE to send last zero length packet in
+ *     OUT_STATUS_STAGE.
+ *   - special attention was needed for IN_STATUS_STAGE. If a packet complete
+ *     event is detected, we terminate the status stage without ackowledging the
+ *     packet (not to risk to loose a potential SETUP packet)
+ */
+static void handle_ep0(struct pxa_udc *udc, int fifo_irq, int opc_irq)
+{
+        u32                     udccsr0;
+        struct pxa_ep           *ep = &udc->pxa_ep[0];
+        struct pxa27x_request   *req = NULL;
+        int                     completed = 0;
+
+        udccsr0 = udc_ep_readl(ep, UDCCSR);
+        ep_dbg(ep, "state=%s, req=%p, udccsr0=0x%03x, udcbcr=%d, irq_msk=%x\n",
+                EP0_STNAME(udc), req, udccsr0, udc_ep_readl(ep, UDCBCR),
+                (fifo_irq << 1 | opc_irq));
+
+        if (!list_empty(&ep->queue))
+                req = list_entry(ep->queue.next, struct pxa27x_request, queue);
+
+        if (udccsr0 & UDCCSR0_SST) {
+                ep_dbg(ep, "clearing stall status\n");
+                nuke(ep, -EPIPE);
+                udc_ep_writel(ep, UDCCSR, UDCCSR0_SST);
+                ep0_idle(udc);
+        }
+
+        if (udccsr0 & UDCCSR0_SA) {
+                nuke(ep, 0);
+                set_ep0state(udc, SETUP_STAGE);
+        }
+
+        switch (udc->ep0state) {
+        case WAIT_FOR_SETUP:
+                /*
+                 * Hardware bug : beware, we cannot clear OPC, since we would
+                 * miss a potential OPC irq for a setup packet.
+                 * So, we only do ... nothing, and hope for a next irq with
+                 * UDCCSR0_SA set.
+                 */
+                break;
+        case SETUP_STAGE:
+                udccsr0 &= UDCCSR0_CTRL_REQ_MASK;
+                if (likely(udccsr0 == UDCCSR0_CTRL_REQ_MASK))
+                        handle_ep0_ctrl_req(udc, req);
+                break;
+        case IN_DATA_STAGE:                     /* GET_DESCRIPTOR */
+                if (epout_has_pkt(ep))
+                        udc_ep_writel(ep, UDCCSR, UDCCSR0_OPC);
+                if (req && !ep_is_full(ep))
+                        completed = write_ep0_fifo(ep, req);
+                if (completed)
+                        ep0_end_in_req(ep, req);
+                break;
+        case OUT_DATA_STAGE:                    /* SET_DESCRIPTOR */
+                if (epout_has_pkt(ep) && req)
+                        completed = read_ep0_fifo(ep, req);
+                if (completed)
+                        ep0_end_out_req(ep, req);
+                break;
+        case STALL:
+                udc_ep_writel(ep, UDCCSR, UDCCSR0_FST);
+                break;
+        case IN_STATUS_STAGE:
+                /*
+                 * Hardware bug : beware, we cannot clear OPC, since we would
+                 * miss a potential PC irq for a setup packet.
+                 * So, we only put the ep0 into WAIT_FOR_SETUP state.
+                 */
+                if (opc_irq)
+                        ep0_idle(udc);
+                break;
+        case OUT_STATUS_STAGE:
+        case WAIT_ACK_SET_CONF_INTERF:
+                ep_warn(ep, "should never get in %s state here!!!\n",
+                                EP0_STNAME(ep->dev));
+                ep0_idle(udc);
+                break;
+        }
+}
+
+/**
+ * handle_ep - Handle endpoint data tranfers
+ * @ep: pxa physical endpoint
+ *
+ * Tries to transfer all pending request data into the endpoint and/or
+ * transfer all pending data in the endpoint into usb requests.
+ *
+ * Is always called when in_interrupt() or with ep->lock held.
+ */
+static void handle_ep(struct pxa_ep *ep)
+{
+        struct pxa27x_request   *req;
+        int completed;
+        u32 udccsr;
+        int is_in = ep->dir_in;
+        int loop = 0;
+
+        do {
+                completed = 0;
+                udccsr = udc_ep_readl(ep, UDCCSR);
+                if (likely(!list_empty(&ep->queue)))
+                        req = list_entry(ep->queue.next,
+                                        struct pxa27x_request, queue);
+                else
+                        req = NULL;
+
+                ep_dbg(ep, "req:%p, udccsr 0x%03x loop=%d\n",
+                                req, udccsr, loop++);
+
+                if (unlikely(udccsr & (UDCCSR_SST | UDCCSR_TRN)))
+                        udc_ep_writel(ep, UDCCSR,
+                                        udccsr & (UDCCSR_SST | UDCCSR_TRN));
+                if (!req)
+                        break;
+
+                if (unlikely(is_in)) {
+                        if (likely(!ep_is_full(ep)))
+                                completed = write_fifo(ep, req);
+                        if (completed)
+                                ep_end_in_req(ep, req);
+                } else {
+                        if (likely(epout_has_pkt(ep)))
+                                completed = read_fifo(ep, req);
+                        if (completed)
+                                ep_end_out_req(ep, req);
+                }
+        } while (completed);
+}
+
+/**
+ * pxa27x_change_configuration - Handle SET_CONF usb request notification
+ * @udc: udc device
+ * @config: usb configuration
+ *
+ * Post the request to upper level.
+ * Don't use any pxa specific harware configuration capabilities
+ */
+static void pxa27x_change_configuration(struct pxa_udc *udc, int config)
+{
+        struct usb_ctrlrequest req ;
+
+        dev_dbg(udc->dev, "config=%d\n", config);
+
+        udc->config = config;
+        udc->last_interface = 0;
+        udc->last_alternate = 0;
+
+        req.bRequestType = 0;
+        req.bRequest = USB_REQ_SET_CONFIGURATION;
+        req.wValue = config;
+        req.wIndex = 0;
+        req.wLength = 0;
+
+        set_ep0state(udc, WAIT_ACK_SET_CONF_INTERF);
+        udc->driver->setup(&udc->gadget, &req);
+}
+
+/**
+ * pxa27x_change_interface - Handle SET_INTERF usb request notification
+ * @udc: udc device
+ * @iface: interface number
+ * @alt: alternate setting number
+ *
+ * Post the request to upper level.
+ * Don't use any pxa specific harware configuration capabilities
+ */
+static void pxa27x_change_interface(struct pxa_udc *udc, int iface, int alt)
+{
+        struct usb_ctrlrequest  req;
+
+        dev_dbg(udc->dev, "interface=%d, alternate setting=%d\n", iface, alt);
+
+        udc->last_interface = iface;
+        udc->last_alternate = alt;
+
+        req.bRequestType = USB_RECIP_INTERFACE;
+        req.bRequest = USB_REQ_SET_INTERFACE;
+        req.wValue = alt;
+        req.wIndex = iface;
+        req.wLength = 0;
+
+        set_ep0state(udc, WAIT_ACK_SET_CONF_INTERF);
+        udc->driver->setup(&udc->gadget, &req);
+}
+
+/*
+ * irq_handle_data - Handle data transfer
+ * @irq: irq IRQ number
+ * @udc: dev pxa_udc device structure
+ *
+ * Called from irq handler, transferts data to or from endpoint to queue
+ */
+static void irq_handle_data(int irq, struct pxa_udc *udc)
+{
+        int i;
+        struct pxa_ep *ep;
+        u32 udcisr0 = udc_readl(udc, UDCISR0) & UDCCISR0_EP_MASK;
+        u32 udcisr1 = udc_readl(udc, UDCISR1) & UDCCISR1_EP_MASK;
+
+        if (udcisr0 & UDCISR_INT_MASK) {
+                udc->pxa_ep[0].stats.irqs++;
+                udc_writel(udc, UDCISR0, UDCISR_INT(0, UDCISR_INT_MASK));
+                handle_ep0(udc, !!(udcisr0 & UDCICR_FIFOERR),
+                                !!(udcisr0 & UDCICR_PKTCOMPL));
+        }
+
+        udcisr0 >>= 2;
+        for (i = 1; udcisr0 != 0 && i < 16; udcisr0 >>= 2, i++) {
+                if (!(udcisr0 & UDCISR_INT_MASK))
+                        continue;
+
+                udc_writel(udc, UDCISR0, UDCISR_INT(i, UDCISR_INT_MASK));
+                ep = &udc->pxa_ep[i];
+                ep->stats.irqs++;
+                handle_ep(ep);
+        }
+
+        for (i = 16; udcisr1 != 0 && i < 24; udcisr1 >>= 2, i++) {
+                udc_writel(udc, UDCISR1, UDCISR_INT(i - 16, UDCISR_INT_MASK));
+                if (!(udcisr1 & UDCISR_INT_MASK))
+                        continue;
+
+                ep = &udc->pxa_ep[i];
+                ep->stats.irqs++;
+                handle_ep(ep);
+        }
+
+}
+
+/**
+ * irq_udc_suspend - Handle IRQ "UDC Suspend"
+ * @udc: udc device
+ */
+static void irq_udc_suspend(struct pxa_udc *udc)
+{
+        udc_writel(udc, UDCISR1, UDCISR1_IRSU);
+        udc->stats.irqs_suspend++;
+
+        if (udc->gadget.speed != USB_SPEED_UNKNOWN
+                        && udc->driver && udc->driver->suspend)
+                udc->driver->suspend(&udc->gadget);
+        ep0_idle(udc);
+}
+
+/**
+  * irq_udc_resume - Handle IRQ "UDC Resume"
+  * @udc: udc device
+  */
+static void irq_udc_resume(struct pxa_udc *udc)
+{
+        udc_writel(udc, UDCISR1, UDCISR1_IRRU);
+        udc->stats.irqs_resume++;
+
+        if (udc->gadget.speed != USB_SPEED_UNKNOWN
+                        && udc->driver && udc->driver->resume)
+                udc->driver->resume(&udc->gadget);
+}
+
+/**
+ * irq_udc_reconfig - Handle IRQ "UDC Change Configuration"
+ * @udc: udc device
+ */
+static void irq_udc_reconfig(struct pxa_udc *udc)
+{
+        unsigned config, interface, alternate, config_change;
+        u32 udccr = udc_readl(udc, UDCCR);
+
+        udc_writel(udc, UDCISR1, UDCISR1_IRCC);
+        udc->stats.irqs_reconfig++;
+
+        config = (udccr & UDCCR_ACN) >> UDCCR_ACN_S;
+        config_change = (config != udc->config);
+        pxa27x_change_configuration(udc, config);
+
+        interface = (udccr & UDCCR_AIN) >> UDCCR_AIN_S;
+        alternate = (udccr & UDCCR_AAISN) >> UDCCR_AAISN_S;
+        pxa27x_change_interface(udc, interface, alternate);
+
+        if (config_change)
+                update_pxa_ep_matches(udc);
+        udc_set_mask_UDCCR(udc, UDCCR_SMAC);
+}
+
+/**
+ * irq_udc_reset - Handle IRQ "UDC Reset"
+ * @udc: udc device
+ */
+static void irq_udc_reset(struct pxa_udc *udc)
+{
+        u32 udccr = udc_readl(udc, UDCCR);
+        struct pxa_ep *ep = &udc->pxa_ep[0];
+
+        dev_info(udc->dev, "USB reset\n");
+        udc_writel(udc, UDCISR1, UDCISR1_IRRS);
+        udc->stats.irqs_reset++;
+
+        if ((udccr & UDCCR_UDA) == 0) {
+                dev_dbg(udc->dev, "USB reset start\n");
+                stop_activity(udc, udc->driver);
+        }
+        udc->gadget.speed = USB_SPEED_FULL;
+        memset(&udc->stats, 0, sizeof udc->stats);
+
+        nuke(ep, -EPROTO);
+        udc_ep_writel(ep, UDCCSR, UDCCSR0_FTF | UDCCSR0_OPC);
+        ep0_idle(udc);
+}
+
+/**
+ * pxa_udc_irq - Main irq handler
+ * @irq: irq number
+ * @_dev: udc device
+ *
+ * Handles all udc interrupts
+ */
+static irqreturn_t pxa_udc_irq(int irq, void *_dev)
+{
+        struct pxa_udc *udc = _dev;
+        u32 udcisr0 = udc_readl(udc, UDCISR0);
+        u32 udcisr1 = udc_readl(udc, UDCISR1);
+        u32 udccr = udc_readl(udc, UDCCR);
+        u32 udcisr1_spec;
+
+        dev_vdbg(udc->dev, "Interrupt, UDCISR0:0x%08x, UDCISR1:0x%08x, "
+                 "UDCCR:0x%08x\n", udcisr0, udcisr1, udccr);
+
+        udcisr1_spec = udcisr1 & 0xf8000000;
+        if (unlikely(udcisr1_spec & UDCISR1_IRSU))
+                irq_udc_suspend(udc);
+        if (unlikely(udcisr1_spec & UDCISR1_IRRU))
+                irq_udc_resume(udc);
+        if (unlikely(udcisr1_spec & UDCISR1_IRCC))
+                irq_udc_reconfig(udc);
+        if (unlikely(udcisr1_spec & UDCISR1_IRRS))
+                irq_udc_reset(udc);
+
+        if ((udcisr0 & UDCCISR0_EP_MASK) | (udcisr1 & UDCCISR1_EP_MASK))
+                irq_handle_data(irq, udc);
+
+        return IRQ_HANDLED;
+}
+
+static struct pxa_udc memory = {
+        .gadget = {
+                .ops            = &pxa_udc_ops,
+                .ep0            = &memory.udc_usb_ep[0].usb_ep,
+                .name           = driver_name,
+                .dev = {
+                        .bus_id         = "gadget",
+                },
+        },
+
+        .udc_usb_ep = {
+                USB_EP_CTRL,
+                USB_EP_OUT_BULK(1),
+                USB_EP_IN_BULK(2),
+                USB_EP_IN_ISO(3),
+                USB_EP_OUT_ISO(4),
+                USB_EP_IN_INT(5),
+        },
+
+        .pxa_ep = {
+                PXA_EP_CTRL,
+                /* Endpoints for gadget zero */
+                PXA_EP_OUT_BULK(1, 1, 3, 0, 0),
+                PXA_EP_IN_BULK(2,  2, 3, 0, 0),
+                /* Endpoints for ether gadget, file storage gadget */
+                PXA_EP_OUT_BULK(3, 1, 1, 0, 0),
+                PXA_EP_IN_BULK(4,  2, 1, 0, 0),
+                PXA_EP_IN_ISO(5,   3, 1, 0, 0),
+                PXA_EP_OUT_ISO(6,  4, 1, 0, 0),
+                PXA_EP_IN_INT(7,   5, 1, 0, 0),
+                /* Endpoints for RNDIS, serial */
+                PXA_EP_OUT_BULK(8, 1, 2, 0, 0),
+                PXA_EP_IN_BULK(9,  2, 2, 0, 0),
+                PXA_EP_IN_INT(10,  5, 2, 0, 0),
+                /*
+                 * All the following endpoints are only for completion.  They
+                 * won't never work, as multiple interfaces are really broken on
+                 * the pxa.
+                */
+                PXA_EP_OUT_BULK(11, 1, 2, 1, 0),
+                PXA_EP_IN_BULK(12,  2, 2, 1, 0),
+                /* Endpoint for CDC Ether */
+                PXA_EP_OUT_BULK(13, 1, 1, 1, 1),
+                PXA_EP_IN_BULK(14,  2, 1, 1, 1),
+        }
+};
+
+/**
+ * pxa_udc_probe - probes the udc device
+ * @_dev: platform device
+ *
+ * Perform basic init : allocates udc clock, creates sysfs files, requests
+ * irq.
+ */
+static int __init pxa_udc_probe(struct platform_device *pdev)
+{
+        struct resource *regs;
+        struct pxa_udc *udc = &memory;
+        int retval;
+
+        regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+        if (!regs)
+                return -ENXIO;
+        udc->irq = platform_get_irq(pdev, 0);
+        if (udc->irq < 0)
+                return udc->irq;
+
+        udc->dev = &pdev->dev;
+        udc->mach = pdev->dev.platform_data;
+
+        udc->clk = clk_get(&pdev->dev, "UDCCLK");
+        if (IS_ERR(udc->clk)) {
+                retval = PTR_ERR(udc->clk);
+                goto err_clk;
+        }
+
+        retval = -ENOMEM;
+        udc->regs = ioremap(regs->start, regs->end - regs->start + 1);
+        if (!udc->regs) {
+                dev_err(&pdev->dev, "Unable to map UDC I/O memory\n");
+                goto err_map;
+        }
+
+        device_initialize(&udc->gadget.dev);
+        udc->gadget.dev.parent = &pdev->dev;
+        udc->gadget.dev.dma_mask = NULL;
+
+        the_controller = udc;
+        platform_set_drvdata(pdev, udc);
+        udc_init_data(udc);
+        pxa_eps_setup(udc);
+
+        /* irq setup after old hardware state is cleaned up */
+        retval = request_irq(udc->irq, pxa_udc_irq,
+                        IRQF_SHARED, driver_name, udc);
+        if (retval != 0) {
+                dev_err(udc->dev, "%s: can't get irq %i, err %d\n",
+                        driver_name, IRQ_USB, retval);
+                goto err_irq;
+        }
+
+        pxa_init_debugfs(udc);
+        return 0;
+err_irq:
+        iounmap(udc->regs);
+err_map:
+        clk_put(udc->clk);
+        udc->clk = NULL;
+err_clk:
+        return retval;
+}
+
+/**
+ * pxa_udc_remove - removes the udc device driver
+ * @_dev: platform device
+ */
+static int __exit pxa_udc_remove(struct platform_device *_dev)
+{
+        struct pxa_udc *udc = platform_get_drvdata(_dev);
+
+        usb_gadget_unregister_driver(udc->driver);
+        free_irq(udc->irq, udc);
+        pxa_cleanup_debugfs(udc);
+
+        platform_set_drvdata(_dev, NULL);
+        the_controller = NULL;
+        clk_put(udc->clk);
+
+        return 0;
+}
+
+static void pxa_udc_shutdown(struct platform_device *_dev)
+{
+        struct pxa_udc *udc = platform_get_drvdata(_dev);
+
+        udc_disable(udc);
+}
+
+#ifdef CONFIG_PM
+/**
+ * pxa_udc_suspend - Suspend udc device
+ * @_dev: platform device
+ * @state: suspend state
+ *
+ * Suspends udc : saves configuration registers (UDCCR*), then disables the udc
+ * device.
+ */
+static int pxa_udc_suspend(struct platform_device *_dev, pm_message_t state)
+{
+        int i;
+        struct pxa_udc *udc = platform_get_drvdata(_dev);
+        struct pxa_ep *ep;
+
+        ep = &udc->pxa_ep[0];
+        udc->udccsr0 = udc_ep_readl(ep, UDCCSR);
+        for (i = 1; i < NR_PXA_ENDPOINTS; i++) {
+                ep = &udc->pxa_ep[i];
+                ep->udccsr_value = udc_ep_readl(ep, UDCCSR);
+                ep->udccr_value  = udc_ep_readl(ep, UDCCR);
+                ep_dbg(ep, "udccsr:0x%03x, udccr:0x%x\n",
+                                ep->udccsr_value, ep->udccr_value);
+        }
+
+        udc_disable(udc);
+
+        return 0;
+}
+
+/**
+ * pxa_udc_resume - Resume udc device
+ * @_dev: platform device
+ *
+ * Resumes udc : restores configuration registers (UDCCR*), then enables the udc
+ * device.
+ */
+static int pxa_udc_resume(struct platform_device *_dev)
+{
+        int i;
+        struct pxa_udc *udc = platform_get_drvdata(_dev);
+        struct pxa_ep *ep;
+
+        ep = &udc->pxa_ep[0];
+        udc_ep_writel(ep, UDCCSR, udc->udccsr0 & (UDCCSR0_FST | UDCCSR0_DME));
+        for (i = 1; i < NR_PXA_ENDPOINTS; i++) {
+                ep = &udc->pxa_ep[i];
+                udc_ep_writel(ep, UDCCSR, ep->udccsr_value);
+                udc_ep_writel(ep, UDCCR,  ep->udccr_value);
+                ep_dbg(ep, "udccsr:0x%03x, udccr:0x%x\n",
+                                ep->udccsr_value, ep->udccr_value);
+        }
+
+        udc_enable(udc);
+        /*
+         * We do not handle OTG yet.
+         *
+         * OTGPH bit is set when sleep mode is entered.
+         * it indicates that OTG pad is retaining its state.
+         * Upon exit from sleep mode and before clearing OTGPH,
+         * Software must configure the USB OTG pad, UDC, and UHC
+         * to the state they were in before entering sleep mode.
+         *
+         * Should be : PSSR |= PSSR_OTGPH;
+         */
+
+        return 0;
+}
+#endif
+
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:pxa2xx-udc");
+
+static struct platform_driver udc_driver = {
+        .driver         = {
+                .name   = "pxa2xx-udc",
+                .owner  = THIS_MODULE,
+        },
+        .remove         = __exit_p(pxa_udc_remove),
+        .shutdown       = pxa_udc_shutdown,
+#ifdef CONFIG_PM
+        .suspend        = pxa_udc_suspend,
+        .resume         = pxa_udc_resume
+#endif
+};
+
+static int __init udc_init(void)
+{
+        printk(KERN_INFO "%s: version %s\n", driver_name, DRIVER_VERSION);
+        return platform_driver_probe(&udc_driver, pxa_udc_probe);
+}
+module_init(udc_init);
+
+
+static void __exit udc_exit(void)
+{
+        platform_driver_unregister(&udc_driver);
+}
+module_exit(udc_exit);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Robert Jarzmik");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/gadget/pxa27x_udc.h b/drivers/usb/gadget/pxa27x_udc.h
new file mode 100644
index 000000000000..1d1b7936ee11
--- /dev/null
+++ b/drivers/usb/gadget/pxa27x_udc.h
@@ -0,0 +1,487 @@
+/*
+ * linux/drivers/usb/gadget/pxa27x_udc.h
+ * Intel PXA27x on-chip full speed USB device controller
+ *
+ * Inspired by original driver by Frank Becker, David Brownell, and others.
+ * Copyright (C) 2008 Robert Jarzmik
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __LINUX_USB_GADGET_PXA27X_H
+#define __LINUX_USB_GADGET_PXA27X_H
+
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+
+/*
+ * Register definitions
+ */
+/* Offsets */
+#define UDCCR           0x0000          /* UDC Control Register */
+#define UDCICR0         0x0004          /* UDC Interrupt Control Register0 */
+#define UDCICR1         0x0008          /* UDC Interrupt Control Register1 */
+#define UDCISR0         0x000C          /* UDC Interrupt Status Register 0 */
+#define UDCISR1         0x0010          /* UDC Interrupt Status Register 1 */
+#define UDCFNR          0x0014          /* UDC Frame Number Register */
+#define UDCOTGICR       0x0018          /* UDC On-The-Go interrupt control */
+#define UP2OCR          0x0020          /* USB Port 2 Output Control register */
+#define UP3OCR          0x0024          /* USB Port 3 Output Control register */
+#define UDCCSRn(x)      (0x0100 + ((x)<<2)) /* UDC Control/Status register */
+#define UDCBCRn(x)      (0x0200 + ((x)<<2)) /* UDC Byte Count Register */
+#define UDCDRn(x)       (0x0300 + ((x)<<2)) /* UDC Data Register  */
+#define UDCCRn(x)       (0x0400 + ((x)<<2)) /* UDC Control Register */
+
+#define UDCCR_OEN       (1 << 31)       /* On-the-Go Enable */
+#define UDCCR_AALTHNP   (1 << 30)       /* A-device Alternate Host Negotiation
+                                           Protocol Port Support */
+#define UDCCR_AHNP      (1 << 29)       /* A-device Host Negotiation Protocol
+                                           Support */
+#define UDCCR_BHNP      (1 << 28)       /* B-device Host Negotiation Protocol
+                                           Enable */
+#define UDCCR_DWRE      (1 << 16)       /* Device Remote Wake-up Enable */
+#define UDCCR_ACN       (0x03 << 11)    /* Active UDC configuration Number */
+#define UDCCR_ACN_S     11
+#define UDCCR_AIN       (0x07 << 8)     /* Active UDC interface Number */
+#define UDCCR_AIN_S     8
+#define UDCCR_AAISN     (0x07 << 5)     /* Active UDC Alternate Interface
+                                           Setting Number */
+#define UDCCR_AAISN_S   5
+#define UDCCR_SMAC      (1 << 4)        /* Switch Endpoint Memory to Active
+                                           Configuration */
+#define UDCCR_EMCE      (1 << 3)        /* Endpoint Memory Configuration
+                                           Error */
+#define UDCCR_UDR       (1 << 2)        /* UDC Resume */
+#define UDCCR_UDA       (1 << 1)        /* UDC Active */
+#define UDCCR_UDE       (1 << 0)        /* UDC Enable */
+
+#define UDCICR_INT(n, intr) (((intr) & 0x03) << (((n) & 0x0F) * 2))
+#define UDCICR1_IECC    (1 << 31)       /* IntEn - Configuration Change */
+#define UDCICR1_IESOF   (1 << 30)       /* IntEn - Start of Frame */
+#define UDCICR1_IERU    (1 << 29)       /* IntEn - Resume */
+#define UDCICR1_IESU    (1 << 28)       /* IntEn - Suspend */
+#define UDCICR1_IERS    (1 << 27)       /* IntEn - Reset */
+#define UDCICR_FIFOERR  (1 << 1)        /* FIFO Error interrupt for EP */
+#define UDCICR_PKTCOMPL (1 << 0)        /* Packet Complete interrupt for EP */
+#define UDCICR_INT_MASK (UDCICR_FIFOERR | UDCICR_PKTCOMPL)
+
+#define UDCISR_INT(n, intr) (((intr) & 0x03) << (((n) & 0x0F) * 2))
+#define UDCISR1_IRCC    (1 << 31)       /* IntReq - Configuration Change */
+#define UDCISR1_IRSOF   (1 << 30)       /* IntReq - Start of Frame */
+#define UDCISR1_IRRU    (1 << 29)       /* IntReq - Resume */
+#define UDCISR1_IRSU    (1 << 28)       /* IntReq - Suspend */
+#define UDCISR1_IRRS    (1 << 27)       /* IntReq - Reset */
+#define UDCISR_INT_MASK (UDCICR_FIFOERR | UDCICR_PKTCOMPL)
+
+#define UDCOTGICR_IESF  (1 << 24)       /* OTG SET_FEATURE command recvd */
+#define UDCOTGICR_IEXR  (1 << 17)       /* Extra Transciever Interrupt
+                                           Rising Edge Interrupt Enable */
+#define UDCOTGICR_IEXF  (1 << 16)       /* Extra Transciever Interrupt
+                                           Falling Edge Interrupt Enable */
+#define UDCOTGICR_IEVV40R (1 << 9)      /* OTG Vbus Valid 4.0V Rising Edge
+                                           Interrupt Enable */
+#define UDCOTGICR_IEVV40F (1 << 8)      /* OTG Vbus Valid 4.0V Falling Edge
+                                           Interrupt Enable */
+#define UDCOTGICR_IEVV44R (1 << 7)      /* OTG Vbus Valid 4.4V Rising Edge
+                                           Interrupt Enable */
+#define UDCOTGICR_IEVV44F (1 << 6)      /* OTG Vbus Valid 4.4V Falling Edge
+                                           Interrupt Enable */
+#define UDCOTGICR_IESVR (1 << 5)        /* OTG Session Valid Rising Edge
+                                           Interrupt Enable */
+#define UDCOTGICR_IESVF (1 << 4)        /* OTG Session Valid Falling Edge
+                                           Interrupt Enable */
+#define UDCOTGICR_IESDR (1 << 3)        /* OTG A-Device SRP Detect Rising
+                                           Edge Interrupt Enable */
+#define UDCOTGICR_IESDF (1 << 2)        /* OTG A-Device SRP Detect Falling
+                                           Edge Interrupt Enable */
+#define UDCOTGICR_IEIDR (1 << 1)        /* OTG ID Change Rising Edge
+                                           Interrupt Enable */
+#define UDCOTGICR_IEIDF (1 << 0)        /* OTG ID Change Falling Edge
+                                           Interrupt Enable */
+
+/* Host Port 2 field bits */
+#define UP2OCR_CPVEN    (1 << 0)        /* Charge Pump Vbus Enable */
+#define UP2OCR_CPVPE    (1 << 1)        /* Charge Pump Vbus Pulse Enable */
+                                        /* Transceiver enablers */
+#define UP2OCR_DPPDE    (1 << 2)        /*   D+ Pull Down Enable */
+#define UP2OCR_DMPDE    (1 << 3)        /*   D- Pull Down Enable */
+#define UP2OCR_DPPUE    (1 << 4)        /*   D+ Pull Up Enable */
+#define UP2OCR_DMPUE    (1 << 5)        /*   D- Pull Up Enable */
+#define UP2OCR_DPPUBE   (1 << 6)        /*   D+ Pull Up Bypass Enable */
+#define UP2OCR_DMPUBE   (1 << 7)        /*   D- Pull Up Bypass Enable */
+#define UP2OCR_EXSP     (1 << 8)        /* External Transceiver Speed Control */
+#define UP2OCR_EXSUS    (1 << 9)        /* External Transceiver Speed Enable */
+#define UP2OCR_IDON     (1 << 10)       /* OTG ID Read Enable */
+#define UP2OCR_HXS      (1 << 16)       /* Transceiver Output Select */
+#define UP2OCR_HXOE     (1 << 17)       /* Transceiver Output Enable */
+#define UP2OCR_SEOS     (1 << 24)       /* Single-Ended Output Select */
+
+#define UDCCSR0_SA      (1 << 7)        /* Setup Active */
+#define UDCCSR0_RNE     (1 << 6)        /* Receive FIFO Not Empty */
+#define UDCCSR0_FST     (1 << 5)        /* Force Stall */
+#define UDCCSR0_SST     (1 << 4)        /* Sent Stall */
+#define UDCCSR0_DME     (1 << 3)        /* DMA Enable */
+#define UDCCSR0_FTF     (1 << 2)        /* Flush Transmit FIFO */
+#define UDCCSR0_IPR     (1 << 1)        /* IN Packet Ready */
+#define UDCCSR0_OPC     (1 << 0)        /* OUT Packet Complete */
+
+#define UDCCSR_DPE      (1 << 9)        /* Data Packet Error */
+#define UDCCSR_FEF      (1 << 8)        /* Flush Endpoint FIFO */
+#define UDCCSR_SP       (1 << 7)        /* Short Packet Control/Status */
+#define UDCCSR_BNE      (1 << 6)        /* Buffer Not Empty (IN endpoints) */
+#define UDCCSR_BNF      (1 << 6)        /* Buffer Not Full (OUT endpoints) */
+#define UDCCSR_FST      (1 << 5)        /* Force STALL */
+#define UDCCSR_SST      (1 << 4)        /* Sent STALL */
+#define UDCCSR_DME      (1 << 3)        /* DMA Enable */
+#define UDCCSR_TRN      (1 << 2)        /* Tx/Rx NAK */
+#define UDCCSR_PC       (1 << 1)        /* Packet Complete */
+#define UDCCSR_FS       (1 << 0)        /* FIFO needs service */
+
+#define UDCCONR_CN      (0x03 << 25)    /* Configuration Number */
+#define UDCCONR_CN_S    25
+#define UDCCONR_IN      (0x07 << 22)    /* Interface Number */
+#define UDCCONR_IN_S    22
+#define UDCCONR_AISN    (0x07 << 19)    /* Alternate Interface Number */
+#define UDCCONR_AISN_S  19
+#define UDCCONR_EN      (0x0f << 15)    /* Endpoint Number */
+#define UDCCONR_EN_S    15
+#define UDCCONR_ET      (0x03 << 13)    /* Endpoint Type: */
+#define UDCCONR_ET_S    13
+#define UDCCONR_ET_INT  (0x03 << 13)    /*   Interrupt */
+#define UDCCONR_ET_BULK (0x02 << 13)    /*   Bulk */
+#define UDCCONR_ET_ISO  (0x01 << 13)    /*   Isochronous */
+#define UDCCONR_ET_NU   (0x00 << 13)    /*   Not used */
+#define UDCCONR_ED      (1 << 12)       /* Endpoint Direction */
+#define UDCCONR_MPS     (0x3ff << 2)    /* Maximum Packet Size */
+#define UDCCONR_MPS_S   2
+#define UDCCONR_DE      (1 << 1)        /* Double Buffering Enable */
+#define UDCCONR_EE      (1 << 0)        /* Endpoint Enable */
+
+#define UDCCR_MASK_BITS (UDCCR_OEN | UDCCR_SMAC | UDCCR_UDR | UDCCR_UDE)
+#define UDCCSR_WR_MASK  (UDCCSR_DME | UDCCSR_FST)
+#define UDC_FNR_MASK    (0x7ff)
+#define UDC_BCR_MASK    (0x3ff)
+
+/*
+ * UDCCR = UDC Endpoint Configuration Registers
+ * UDCCSR = UDC Control/Status Register for this EP
+ * UDCBCR = UDC Byte Count Remaining (contents of OUT fifo)
+ * UDCDR = UDC Endpoint Data Register (the fifo)
+ */
+#define ofs_UDCCR(ep)   (UDCCRn(ep->idx))
+#define ofs_UDCCSR(ep)  (UDCCSRn(ep->idx))
+#define ofs_UDCBCR(ep)  (UDCBCRn(ep->idx))
+#define ofs_UDCDR(ep)   (UDCDRn(ep->idx))
+
+/* Register access macros */
+#define udc_ep_readl(ep, reg)   \
+        __raw_readl((ep)->dev->regs + ofs_##reg(ep))
+#define udc_ep_writel(ep, reg, value)   \
+        __raw_writel((value), ep->dev->regs + ofs_##reg(ep))
+#define udc_ep_readb(ep, reg)   \
+        __raw_readb((ep)->dev->regs + ofs_##reg(ep))
+#define udc_ep_writeb(ep, reg, value)   \
+        __raw_writeb((value), ep->dev->regs + ofs_##reg(ep))
+#define udc_readl(dev, reg)     \
+        __raw_readl((dev)->regs + (reg))
+#define udc_writel(udc, reg, value)     \
+        __raw_writel((value), (udc)->regs + (reg))
+
+#define UDCCSR_MASK             (UDCCSR_FST | UDCCSR_DME)
+#define UDCCISR0_EP_MASK        ~0
+#define UDCCISR1_EP_MASK        0xffff
+#define UDCCSR0_CTRL_REQ_MASK   (UDCCSR0_OPC | UDCCSR0_SA | UDCCSR0_RNE)
+
+#define EPIDX(ep)       (ep->idx)
+#define EPADDR(ep)      (ep->addr)
+#define EPXFERTYPE(ep)  (ep->type)
+#define EPNAME(ep)      (ep->name)
+#define is_ep0(ep)      (!ep->idx)
+#define EPXFERTYPE_is_ISO(ep) (EPXFERTYPE(ep) == USB_ENDPOINT_XFER_ISOC)
+
+/*
+ * Endpoint definitions
+ *
+ * Once enabled, pxa endpoint configuration is freezed, and cannot change
+ * unless a reset happens or the udc is disabled.
+ * Therefore, we must define all pxa potential endpoint definitions needed for
+ * all gadget and set them up before the udc is enabled.
+ *
+ * As the architecture chosen is fully static, meaning the pxa endpoint
+ * configurations are set up once and for all, we must provide a way to match
+ * one usb endpoint (usb_ep) to several pxa endpoints. The reason is that gadget
+ * layer autoconf doesn't choose the usb_ep endpoint on (config, interface, alt)
+ * criteria, while the pxa architecture requires that.
+ *
+ * The solution is to define several pxa endpoints matching one usb_ep. Ex:
+ *   - "ep1-in" matches pxa endpoint EPA (which is an IN ep at addr 1, when
+ *     the udc talks on (config=3, interface=0, alt=0)
+ *   - "ep1-in" matches pxa endpoint EPB (which is an IN ep at addr 1, when
+ *     the udc talks on (config=3, interface=0, alt=1)
+ *   - "ep1-in" matches pxa endpoint EPC (which is an IN ep at addr 1, when
+ *     the udc talks on (config=2, interface=0, alt=0)
+ *
+ * We'll define the pxa endpoint by its index (EPA => idx=1, EPB => idx=2, ...)
+ */
+
+/*
+ * Endpoint definition helpers
+ */
+#define USB_EP_DEF(addr, bname, dir, type, maxpkt) \
+{ .usb_ep = { .name = bname, .ops = &pxa_ep_ops, .maxpacket = maxpkt, }, \
+  .desc = {     .bEndpointAddress = addr | (dir ? USB_DIR_IN : 0), \
+                .bmAttributes = type, \
+                .wMaxPacketSize = maxpkt, }, \
+  .dev = &memory \
+}
+#define USB_EP_BULK(addr, bname, dir) \
+  USB_EP_DEF(addr, bname, dir, USB_ENDPOINT_XFER_BULK, BULK_FIFO_SIZE)
+#define USB_EP_ISO(addr, bname, dir) \
+  USB_EP_DEF(addr, bname, dir, USB_ENDPOINT_XFER_ISOC, ISO_FIFO_SIZE)
+#define USB_EP_INT(addr, bname, dir) \
+  USB_EP_DEF(addr, bname, dir, USB_ENDPOINT_XFER_INT, INT_FIFO_SIZE)
+#define USB_EP_IN_BULK(n)       USB_EP_BULK(n, "ep" #n "in-bulk", 1)
+#define USB_EP_OUT_BULK(n)      USB_EP_BULK(n, "ep" #n "out-bulk", 0)
+#define USB_EP_IN_ISO(n)        USB_EP_ISO(n,  "ep" #n "in-iso", 1)
+#define USB_EP_OUT_ISO(n)       USB_EP_ISO(n,  "ep" #n "out-iso", 0)
+#define USB_EP_IN_INT(n)        USB_EP_INT(n,  "ep" #n "in-int", 1)
+#define USB_EP_CTRL             USB_EP_DEF(0,  "ep0", 0, 0, EP0_FIFO_SIZE)
+
+#define PXA_EP_DEF(_idx, _addr, dir, _type, maxpkt, _config, iface, altset) \
+{ \
+        .dev = &memory, \
+        .name = "ep" #_idx, \
+        .idx = _idx, .enabled = 0, \
+        .dir_in = dir, .addr = _addr, \
+        .config = _config, .interface = iface, .alternate = altset, \
+        .type = _type, .fifo_size = maxpkt, \
+}
+#define PXA_EP_BULK(_idx, addr, dir, config, iface, alt) \
+  PXA_EP_DEF(_idx, addr, dir, USB_ENDPOINT_XFER_BULK, BULK_FIFO_SIZE, \
+                config, iface, alt)
+#define PXA_EP_ISO(_idx, addr, dir, config, iface, alt) \
+  PXA_EP_DEF(_idx, addr, dir, USB_ENDPOINT_XFER_ISOC, ISO_FIFO_SIZE, \
+                config, iface, alt)
+#define PXA_EP_INT(_idx, addr, dir, config, iface, alt) \
+  PXA_EP_DEF(_idx, addr, dir, USB_ENDPOINT_XFER_INT, INT_FIFO_SIZE, \
+                config, iface, alt)
+#define PXA_EP_IN_BULK(i, adr, c, f, a)         PXA_EP_BULK(i, adr, 1, c, f, a)
+#define PXA_EP_OUT_BULK(i, adr, c, f, a)        PXA_EP_BULK(i, adr, 0, c, f, a)
+#define PXA_EP_IN_ISO(i, adr, c, f, a)          PXA_EP_ISO(i, adr, 1, c, f, a)
+#define PXA_EP_OUT_ISO(i, adr, c, f, a)         PXA_EP_ISO(i, adr, 0, c, f, a)
+#define PXA_EP_IN_INT(i, adr, c, f, a)          PXA_EP_INT(i, adr, 1, c, f, a)
+#define PXA_EP_CTRL     PXA_EP_DEF(0, 0, 0, 0, EP0_FIFO_SIZE, 0, 0, 0)
+
+struct pxa27x_udc;
+
+struct stats {
+        unsigned long in_ops;
+        unsigned long out_ops;
+        unsigned long in_bytes;
+        unsigned long out_bytes;
+        unsigned long irqs;
+};
+
+/**
+ * struct udc_usb_ep - container of each usb_ep structure
+ * @usb_ep: usb endpoint
+ * @desc: usb descriptor, especially type and address
+ * @dev: udc managing this endpoint
+ * @pxa_ep: matching pxa_ep (cache of find_pxa_ep() call)
+ */
+struct udc_usb_ep {
+        struct usb_ep usb_ep;
+        struct usb_endpoint_descriptor desc;
+        struct pxa_udc *dev;
+        struct pxa_ep *pxa_ep;
+};
+
+/**
+ * struct pxa_ep - pxa endpoint
+ * @dev: udc device
+ * @queue: requests queue
+ * @lock: lock to pxa_ep data (queues and stats)
+ * @enabled: true when endpoint enabled (not stopped by gadget layer)
+ * @idx: endpoint index (1 => epA, 2 => epB, ..., 24 => epX)
+ * @name: endpoint name (for trace/debug purpose)
+ * @dir_in: 1 if IN endpoint, 0 if OUT endpoint
+ * @addr: usb endpoint number
+ * @config: configuration in which this endpoint is active
+ * @interface: interface in which this endpoint is active
+ * @alternate: altsetting in which this endpoitn is active
+ * @fifo_size: max packet size in the endpoint fifo
+ * @type: endpoint type (bulk, iso, int, ...)
+ * @udccsr_value: save register of UDCCSR0 for suspend/resume
+ * @udccr_value: save register of UDCCR for suspend/resume
+ * @stats: endpoint statistics
+ *
+ * The *PROBLEM* is that pxa's endpoint configuration scheme is both misdesigned
+ * (cares about config/interface/altsetting, thus placing needless limits on
+ * device capability) and full of implementation bugs forcing it to be set up
+ * for use more or less like a pxa255.
+ *
+ * As we define the pxa_ep statically, we must guess all needed pxa_ep for all
+ * gadget which may work with this udc driver.
+ */
+struct pxa_ep {
+        struct pxa_udc          *dev;
+
+        struct list_head        queue;
+        spinlock_t              lock;           /* Protects this structure */
+                                                /* (queues, stats) */
+        unsigned                enabled:1;
+
+        unsigned                idx:5;
+        char                    *name;
+
+        /*
+         * Specific pxa endpoint data, needed for hardware initialization
+         */
+        unsigned                dir_in:1;
+        unsigned                addr:3;
+        unsigned                config:2;
+        unsigned                interface:3;
+        unsigned                alternate:3;
+        unsigned                fifo_size;
+        unsigned                type;
+
+#ifdef CONFIG_PM
+        u32                     udccsr_value;
+        u32                     udccr_value;
+#endif
+        struct stats            stats;
+};
+
+/**
+ * struct pxa27x_request - container of each usb_request structure
+ * @req: usb request
+ * @udc_usb_ep: usb endpoint the request was submitted on
+ * @in_use: sanity check if request already queued on an pxa_ep
+ * @queue: linked list of requests, linked on pxa_ep->queue
+ */
+struct pxa27x_request {
+        struct usb_request                      req;
+        struct udc_usb_ep                       *udc_usb_ep;
+        unsigned                                in_use:1;
+        struct list_head                        queue;
+};
+
+enum ep0_state {
+        WAIT_FOR_SETUP,
+        SETUP_STAGE,
+        IN_DATA_STAGE,
+        OUT_DATA_STAGE,
+        IN_STATUS_STAGE,
+        OUT_STATUS_STAGE,
+        STALL,
+        WAIT_ACK_SET_CONF_INTERF
+};
+
+static char *ep0_state_name[] = {
+        "WAIT_FOR_SETUP", "SETUP_STAGE", "IN_DATA_STAGE", "OUT_DATA_STAGE",
+        "IN_STATUS_STAGE", "OUT_STATUS_STAGE", "STALL",
+        "WAIT_ACK_SET_CONF_INTERF"
+};
+#define EP0_STNAME(udc) ep0_state_name[(udc)->ep0state]
+
+#define EP0_FIFO_SIZE   16U
+#define BULK_FIFO_SIZE  64U
+#define ISO_FIFO_SIZE   256U
+#define INT_FIFO_SIZE   16U
+
+struct udc_stats {
+        unsigned long   irqs_reset;
+        unsigned long   irqs_suspend;
+        unsigned long   irqs_resume;
+        unsigned long   irqs_reconfig;
+};
+
+#define NR_USB_ENDPOINTS (1 + 5)        /* ep0 + ep1in-bulk + .. + ep3in-iso */
+#define NR_PXA_ENDPOINTS (1 + 14)       /* ep0 + epA + epB + .. + epX */
+
+/**
+ * struct pxa_udc - udc structure
+ * @regs: mapped IO space
+ * @irq: udc irq
+ * @clk: udc clock
+ * @usb_gadget: udc gadget structure
+ * @driver: bound gadget (zero, g_ether, g_file_storage, ...)
+ * @dev: device
+ * @mach: machine info, used to activate specific GPIO
+ * @ep0state: control endpoint state machine state
+ * @stats: statistics on udc usage
+ * @udc_usb_ep: array of usb endpoints offered by the gadget
+ * @pxa_ep: array of pxa available endpoints
+ * @config: UDC active configuration
+ * @last_interface: UDC interface of the last SET_INTERFACE host request
+ * @last_alternate: UDC altsetting of the last SET_INTERFACE host request
+ * @udccsr0: save of udccsr0 in case of suspend
+ * @debugfs_root: root entry of debug filesystem
+ * @debugfs_state: debugfs entry for "udcstate"
+ * @debugfs_queues: debugfs entry for "queues"
+ * @debugfs_eps: debugfs entry for "epstate"
+ */
+struct pxa_udc {
+        void __iomem                            *regs;
+        int                                     irq;
+        struct clk                              *clk;
+
+        struct usb_gadget                       gadget;
+        struct usb_gadget_driver                *driver;
+        struct device                           *dev;
+        struct pxa2xx_udc_mach_info             *mach;
+
+        enum ep0_state                          ep0state;
+        struct udc_stats                        stats;
+
+        struct udc_usb_ep                       udc_usb_ep[NR_USB_ENDPOINTS];
+        struct pxa_ep                           pxa_ep[NR_PXA_ENDPOINTS];
+
+        unsigned                                config:2;
+        unsigned                                last_interface:3;
+        unsigned                                last_alternate:3;
+
+#ifdef CONFIG_PM
+        unsigned                                udccsr0;
+#endif
+#ifdef CONFIG_USB_GADGET_DEBUG_FS
+        struct dentry                           *debugfs_root;
+        struct dentry                           *debugfs_state;
+        struct dentry                           *debugfs_queues;
+        struct dentry                           *debugfs_eps;
+#endif
+};
+
+static inline struct pxa_udc *to_gadget_udc(struct usb_gadget *gadget)
+{
+        return container_of(gadget, struct pxa_udc, gadget);
+}
+
+/*
+ * Debugging/message support
+ */
+#define ep_dbg(ep, fmt, arg...) \
+        dev_dbg(ep->dev->dev, "%s:%s: " fmt, EPNAME(ep), __func__, ## arg)
+#define ep_vdbg(ep, fmt, arg...) \
+        dev_vdbg(ep->dev->dev, "%s:%s: " fmt, EPNAME(ep), __func__, ## arg)
+#define ep_err(ep, fmt, arg...) \
+        dev_err(ep->dev->dev, "%s:%s: " fmt, EPNAME(ep), __func__, ## arg)
+#define ep_info(ep, fmt, arg...) \
+        dev_info(ep->dev->dev, "%s:%s: " fmt, EPNAME(ep), __func__, ## arg)
+#define ep_warn(ep, fmt, arg...) \
+        dev_warn(ep->dev->dev, "%s:%s:" fmt, EPNAME(ep), __func__, ## arg)
+
+#endif /* __LINUX_USB_GADGET_PXA27X_H */
diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c
index 8d158e5640e3..54cdd6f94034 100644
--- a/drivers/usb/gadget/serial.c
+++ b/drivers/usb/gadget/serial.c
@@ -135,7 +135,10 @@ struct gs_port {
         int                     port_in_use;    /* open/close in progress */
         wait_queue_head_t       port_write_wait;/* waiting to write */
         struct gs_buf           *port_write_buf;
-        struct usb_cdc_line_coding      port_line_coding;
+        struct usb_cdc_line_coding port_line_coding;    /* 8-N-1 etc */
+        u16                     port_handshake_bits;
+#define RS232_RTS       (1 << 1)
+#define RS232_DTE       (1 << 0)
 };
 
 /* the device structure holds info for the USB device */
@@ -199,6 +202,8 @@ static int gs_setup_standard(struct usb_gadget *gadget,
 static int gs_setup_class(struct usb_gadget *gadget,
         const struct usb_ctrlrequest *ctrl);
 static void gs_setup_complete(struct usb_ep *ep, struct usb_request *req);
+static void gs_setup_complete_set_line_coding(struct usb_ep *ep,
+        struct usb_request *req);
 static void gs_disconnect(struct usb_gadget *gadget);
 static int gs_set_config(struct gs_dev *dev, unsigned config);
 static void gs_reset_config(struct gs_dev *dev);
@@ -406,7 +411,7 @@ static struct usb_cdc_acm_descriptor gs_acm_descriptor = {
         .bLength =              sizeof(gs_acm_descriptor),
         .bDescriptorType =      USB_DT_CS_INTERFACE,
         .bDescriptorSubType =   USB_CDC_ACM_TYPE,
-        .bmCapabilities =       0,
+        .bmCapabilities =       (1 << 1),
 };
 
 static const struct usb_cdc_union_desc gs_union_desc = {
@@ -1502,6 +1507,8 @@ static int gs_setup(struct usb_gadget *gadget,
         u16 wValue = le16_to_cpu(ctrl->wValue);
         u16 wLength = le16_to_cpu(ctrl->wLength);
 
+        req->complete = gs_setup_complete;
+
         switch (ctrl->bRequestType & USB_TYPE_MASK) {
         case USB_TYPE_STANDARD:
                 ret = gs_setup_standard(gadget,ctrl);
@@ -1679,18 +1686,14 @@ static int gs_setup_class(struct usb_gadget *gadget,
 
         switch (ctrl->bRequest) {
         case USB_CDC_REQ_SET_LINE_CODING:
-                /* FIXME Submit req to read the data; have its completion
-                 * handler copy that data to port->port_line_coding (iff
-                 * it's valid) and maybe pass it on.  Until then, fail.
-                 */
-                pr_warning("gs_setup: set_line_coding "
-                                "unuspported\n");
+                if (wLength != sizeof(struct usb_cdc_line_coding))
+                        break;
+                ret = wLength;
+                req->complete = gs_setup_complete_set_line_coding;
                 break;
 
         case USB_CDC_REQ_GET_LINE_CODING:
-                port = dev->dev_port[0];        /* ACM only has one port */
-                ret = min(wLength,
-                        (u16)sizeof(struct usb_cdc_line_coding));
+                ret = min_t(int, wLength, sizeof(struct usb_cdc_line_coding));
                 if (port) {
                         spin_lock(&port->port_lock);
                         memcpy(req->buf, &port->port_line_coding, ret);
@@ -1699,15 +1702,27 @@ static int gs_setup_class(struct usb_gadget *gadget,
                 break;
 
         case USB_CDC_REQ_SET_CONTROL_LINE_STATE:
-                /* FIXME Submit req to read the data; have its completion
-                 * handler use that to set the state (iff it's valid) and
-                 * maybe pass it on.  Until then, fail.
-                 */
-                pr_warning("gs_setup: set_control_line_state "
-                                "unuspported\n");
+                if (wLength != 0)
+                        break;
+                ret = 0;
+                if (port) {
+                        /* REVISIT:  we currently just remember this data.
+                         * If we change that, update whatever hardware needs
+                         * updating.
+                         */
+                        spin_lock(&port->port_lock);
+                        port->port_handshake_bits = wValue;
+                        spin_unlock(&port->port_lock);
+                }
                 break;
 
         default:
+                /* NOTE:  strictly speaking, we should accept AT-commands
+                 * using SEND_ENCPSULATED_COMMAND/GET_ENCAPSULATED_RESPONSE.
+                 * But our call management descriptor says we don't handle
+                 * call management, so we should be able to get by without
+                 * handling those "required" commands (except by stalling).
+                 */
                 pr_err("gs_setup: unknown class request, "
                                 "type=%02x, request=%02x, value=%04x, "
                                 "index=%04x, length=%d\n",
@@ -1719,6 +1734,42 @@ static int gs_setup_class(struct usb_gadget *gadget,
         return ret;
 }
 
+static void gs_setup_complete_set_line_coding(struct usb_ep *ep,
+                struct usb_request *req)
+{
+        struct gs_dev *dev = ep->driver_data;
+        struct gs_port *port = dev->dev_port[0]; /* ACM only has one port */
+
+        switch (req->status) {
+        case 0:
+                /* normal completion */
+                if (req->actual != sizeof(port->port_line_coding))
+                        usb_ep_set_halt(ep);
+                else if (port) {
+                        struct usb_cdc_line_coding      *value = req->buf;
+
+                        /* REVISIT:  we currently just remember this data.
+                         * If we change that, (a) validate it first, then
+                         * (b) update whatever hardware needs updating.
+                         */
+                        spin_lock(&port->port_lock);
+                        port->port_line_coding = *value;
+                        spin_unlock(&port->port_lock);
+                }
+                break;
+
+        case -ESHUTDOWN:
+                /* disconnect */
+                gs_free_req(ep, req);
+                break;
+
+        default:
+                /* unexpected */
+                break;
+        }
+        return;
+}
+
 /*
  * gs_setup_complete
  */
@@ -1906,6 +1957,11 @@ static int gs_set_config(struct gs_dev *dev, unsigned config)
                 }
         }
 
+        /* REVISIT the ACM mode should be able to actually *issue* some
+         * notifications, for at least serial state change events if
+         * not also for network connection; say so in bmCapabilities.
+         */
+
         pr_info("gs_set_config: %s configured, %s speed %s config\n",
                 GS_LONG_NAME,
                 gadget->speed == USB_SPEED_HIGH ? "high" : "full",
diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c
index d3d4f4048e6c..fce4924dbbe8 100644
--- a/drivers/usb/gadget/zero.c
+++ b/drivers/usb/gadget/zero.c
@@ -23,9 +23,7 @@
 /*
  * Gadget Zero only needs two bulk endpoints, and is an example of how you
  * can write a hardware-agnostic gadget driver running inside a USB device.
- *
- * Hardware details are visible (see CONFIG_USB_ZERO_* below) but don't
- * affect most of the driver.
+ * Some hardware details are visible, but don't affect most of the driver.
  *
  * Use it with the Linux host/master side "usbtest" driver to get a basic
  * functional test of your device-side usb stack, or with "usb-skeleton".
@@ -37,6 +35,7 @@
  *   buflen=N           default N=4096, buffer size used
  *   qlen=N             default N=32, how many buffers in the loopback queue
  *   loopdefault        default false, list loopback config first
+ *   autoresume=N       default N=0, seconds before triggering remote wakeup
  *
  * Many drivers will only have one configuration, letting them be much
  * simpler if they also don't support high speed operation (like this
@@ -62,13 +61,13 @@
 
 /*-------------------------------------------------------------------------*/
 
-#define DRIVER_VERSION          "Lughnasadh, 2007"
+#define DRIVER_VERSION          "Earth Day 2008"
 
-static const char shortname [] = "zero";
-static const char longname [] = "Gadget Zero";
+static const char shortname[] = "zero";
+static const char longname[] = "Gadget Zero";
 
-static const char source_sink [] = "source and sink data";
-static const char loopback [] = "loop input to output";
+static const char source_sink[] = "source and sink data";
+static const char loopback[] = "loop input to output";
 
 /*-------------------------------------------------------------------------*/
 
@@ -120,16 +119,16 @@ static unsigned buflen = 4096;
 static unsigned qlen = 32;
 static unsigned pattern = 0;
 
-module_param (buflen, uint, S_IRUGO);
-module_param (qlen, uint, S_IRUGO);
-module_param (pattern, uint, S_IRUGO|S_IWUSR);
+module_param(buflen, uint, S_IRUGO);
+module_param(qlen, uint, S_IRUGO);
+module_param(pattern, uint, S_IRUGO|S_IWUSR);
 
 /*
  * if it's nonzero, autoresume says how many seconds to wait
  * before trying to wake up the host after suspend.
  */
 static unsigned autoresume = 0;
-module_param (autoresume, uint, 0);
+module_param(autoresume, uint, 0);
 
 /*
  * Normally the "loopback" configuration is second (index 1) so
@@ -138,8 +137,7 @@ module_param (autoresume, uint, 0);
  * Or controllers (like superh) that only support one config.
  */
 static int loopdefault = 0;
-
-module_param (loopdefault, bool, S_IRUGO|S_IWUSR);
+module_param(loopdefault, bool, S_IRUGO|S_IWUSR);
 
 /*-------------------------------------------------------------------------*/
 
@@ -176,24 +174,22 @@ module_param (loopdefault, bool, S_IRUGO|S_IWUSR);
 #define CONFIG_SOURCE_SINK      3
 #define CONFIG_LOOPBACK         2
 
-static struct usb_device_descriptor
-device_desc = {
+static struct usb_device_descriptor device_desc = {
         .bLength =              sizeof device_desc,
         .bDescriptorType =      USB_DT_DEVICE,
 
-        .bcdUSB =               __constant_cpu_to_le16 (0x0200),
+        .bcdUSB =               __constant_cpu_to_le16(0x0200),
         .bDeviceClass =         USB_CLASS_VENDOR_SPEC,
 
-        .idVendor =             __constant_cpu_to_le16 (DRIVER_VENDOR_NUM),
-        .idProduct =            __constant_cpu_to_le16 (DRIVER_PRODUCT_NUM),
+        .idVendor =             __constant_cpu_to_le16(DRIVER_VENDOR_NUM),
+        .idProduct =            __constant_cpu_to_le16(DRIVER_PRODUCT_NUM),
         .iManufacturer =        STRING_MANUFACTURER,
         .iProduct =             STRING_PRODUCT,
         .iSerialNumber =        STRING_SERIAL,
         .bNumConfigurations =   2,
 };
 
-static struct usb_config_descriptor
-source_sink_config = {
+static struct usb_config_descriptor source_sink_config = {
         .bLength =              sizeof source_sink_config,
         .bDescriptorType =      USB_DT_CONFIG,
 
@@ -205,8 +201,7 @@ source_sink_config = {
         .bMaxPower =            1,      /* self-powered */
 };
 
-static struct usb_config_descriptor
-loopback_config = {
+static struct usb_config_descriptor loopback_config = {
         .bLength =              sizeof loopback_config,
         .bDescriptorType =      USB_DT_CONFIG,
 
@@ -218,8 +213,7 @@ loopback_config = {
         .bMaxPower =            1,      /* self-powered */
 };
 
-static struct usb_otg_descriptor
-otg_descriptor = {
+static struct usb_otg_descriptor otg_descriptor = {
         .bLength =              sizeof otg_descriptor,
         .bDescriptorType =      USB_DT_OTG,
 
@@ -228,8 +222,7 @@ otg_descriptor = {
 
 /* one interface in each configuration */
 
-static const struct usb_interface_descriptor
-source_sink_intf = {
+static const struct usb_interface_descriptor source_sink_intf = {
         .bLength =              sizeof source_sink_intf,
         .bDescriptorType =      USB_DT_INTERFACE,
 
@@ -238,8 +231,7 @@ source_sink_intf = {
         .iInterface =           STRING_SOURCE_SINK,
 };
 
-static const struct usb_interface_descriptor
-loopback_intf = {
+static const struct usb_interface_descriptor loopback_intf = {
         .bLength =              sizeof loopback_intf,
         .bDescriptorType =      USB_DT_INTERFACE,
 
@@ -250,8 +242,7 @@ loopback_intf = {
 
 /* two full speed bulk endpoints; their use is config-dependent */
 
-static struct usb_endpoint_descriptor
-fs_source_desc = {
+static struct usb_endpoint_descriptor fs_source_desc = {
         .bLength =              USB_DT_ENDPOINT_SIZE,
         .bDescriptorType =      USB_DT_ENDPOINT,
 
@@ -259,8 +250,7 @@ fs_source_desc = {
         .bmAttributes =         USB_ENDPOINT_XFER_BULK,
 };
 
-static struct usb_endpoint_descriptor
-fs_sink_desc = {
+static struct usb_endpoint_descriptor fs_sink_desc = {
         .bLength =              USB_DT_ENDPOINT_SIZE,
         .bDescriptorType =      USB_DT_ENDPOINT,
 
@@ -268,7 +258,7 @@ fs_sink_desc = {
         .bmAttributes =         USB_ENDPOINT_XFER_BULK,
 };
 
-static const struct usb_descriptor_header *fs_source_sink_function [] = {
+static const struct usb_descriptor_header *fs_source_sink_function[] = {
         (struct usb_descriptor_header *) &otg_descriptor,
         (struct usb_descriptor_header *) &source_sink_intf,
         (struct usb_descriptor_header *) &fs_sink_desc,
@@ -276,7 +266,7 @@ static const struct usb_descriptor_header *fs_source_sink_function [] = {
         NULL,
 };
 
-static const struct usb_descriptor_header *fs_loopback_function [] = {
+static const struct usb_descriptor_header *fs_loopback_function[] = {
         (struct usb_descriptor_header *) &otg_descriptor,
         (struct usb_descriptor_header *) &loopback_intf,
         (struct usb_descriptor_header *) &fs_sink_desc,
@@ -293,36 +283,33 @@ static const struct usb_descriptor_header *fs_loopback_function [] = {
  * for the config descriptor.
  */
 
-static struct usb_endpoint_descriptor
-hs_source_desc = {
+static struct usb_endpoint_descriptor hs_source_desc = {
         .bLength =              USB_DT_ENDPOINT_SIZE,
         .bDescriptorType =      USB_DT_ENDPOINT,
 
         .bmAttributes =         USB_ENDPOINT_XFER_BULK,
-        .wMaxPacketSize =       __constant_cpu_to_le16 (512),
+        .wMaxPacketSize =       __constant_cpu_to_le16(512),
 };
 
-static struct usb_endpoint_descriptor
-hs_sink_desc = {
+static struct usb_endpoint_descriptor hs_sink_desc = {
         .bLength =              USB_DT_ENDPOINT_SIZE,
         .bDescriptorType =      USB_DT_ENDPOINT,
 
         .bmAttributes =         USB_ENDPOINT_XFER_BULK,
-        .wMaxPacketSize =       __constant_cpu_to_le16 (512),
+        .wMaxPacketSize =       __constant_cpu_to_le16(512),
 };
 
-static struct usb_qualifier_descriptor
-dev_qualifier = {
+static struct usb_qualifier_descriptor dev_qualifier = {
         .bLength =              sizeof dev_qualifier,
         .bDescriptorType =      USB_DT_DEVICE_QUALIFIER,
 
-        .bcdUSB =               __constant_cpu_to_le16 (0x0200),
+        .bcdUSB =               __constant_cpu_to_le16(0x0200),
         .bDeviceClass =         USB_CLASS_VENDOR_SPEC,
 
         .bNumConfigurations =   2,
 };
 
-static const struct usb_descriptor_header *hs_source_sink_function [] = {
+static const struct usb_descriptor_header *hs_source_sink_function[] = {
         (struct usb_descriptor_header *) &otg_descriptor,
         (struct usb_descriptor_header *) &source_sink_intf,
         (struct usb_descriptor_header *) &hs_source_desc,
@@ -330,7 +317,7 @@ static const struct usb_descriptor_header *hs_source_sink_function [] = {
         NULL,
 };
 
-static const struct usb_descriptor_header *hs_loopback_function [] = {
+static const struct usb_descriptor_header *hs_loopback_function[] = {
         (struct usb_descriptor_header *) &otg_descriptor,
         (struct usb_descriptor_header *) &loopback_intf,
         (struct usb_descriptor_header *) &hs_source_desc,
@@ -355,7 +342,7 @@ static char serial[] = "0123456789.0123456789.0123456789";
 
 
 /* static strings, in UTF-8 */
-static struct usb_string                strings [] = {
+static struct usb_string strings[] = {
         { STRING_MANUFACTURER, manufacturer, },
         { STRING_PRODUCT, longname, },
         { STRING_SERIAL, serial, },
@@ -364,7 +351,7 @@ static struct usb_string		strings [] = {
         {  }                    /* end of list */
 };
 
-static struct usb_gadget_strings        stringtab = {
+static struct usb_gadget_strings stringtab = {
         .language       = 0x0409,       /* en-us */
         .strings        = strings,
 };
@@ -387,8 +374,7 @@ static struct usb_gadget_strings	stringtab = {
  * high bandwidth modes at high speed.  (Maybe work like Intel's test
  * device?)
  */
-static int
-config_buf (struct usb_gadget *gadget,
+static int config_buf(struct usb_gadget *gadget,
                 u8 *buf, u8 type, unsigned index)
 {
         int                             is_source_sink;
@@ -419,7 +405,7 @@ config_buf (struct usb_gadget *gadget,
         if (!gadget_is_otg(gadget))
                 function++;
 
-        len = usb_gadget_config_buf (is_source_sink
+        len = usb_gadget_config_buf(is_source_sink
                                         ? &source_sink_config
                                         : &loopback_config,
                         buf, USB_BUFSIZ, function);
@@ -431,27 +417,26 @@ config_buf (struct usb_gadget *gadget,
 
 /*-------------------------------------------------------------------------*/
 
-static struct usb_request *
-alloc_ep_req (struct usb_ep *ep, unsigned length)
+static struct usb_request *alloc_ep_req(struct usb_ep *ep, unsigned length)
 {
         struct usb_request      *req;
 
-        req = usb_ep_alloc_request (ep, GFP_ATOMIC);
+        req = usb_ep_alloc_request(ep, GFP_ATOMIC);
         if (req) {
                 req->length = length;
                 req->buf = kmalloc(length, GFP_ATOMIC);
                 if (!req->buf) {
-                        usb_ep_free_request (ep, req);
+                        usb_ep_free_request(ep, req);
                         req = NULL;
                 }
         }
         return req;
 }
 
-static void free_ep_req (struct usb_ep *ep, struct usb_request *req)
+static void free_ep_req(struct usb_ep *ep, struct usb_request *req)
 {
         kfree(req->buf);
-        usb_ep_free_request (ep, req);
+        usb_ep_free_request(ep, req);
 }
 
 /*-------------------------------------------------------------------------*/
@@ -472,7 +457,7 @@ static void free_ep_req (struct usb_ep *ep, struct usb_request *req)
 /* optionally require specific source/sink data patterns  */
 
 static int
-check_read_data (
+check_read_data(
         struct zero_dev         *dev,
         struct usb_ep           *ep,
         struct usb_request      *req
@@ -498,8 +483,8 @@ check_read_data (
                                 continue;
                         break;
                 }
-                ERROR (dev, "bad OUT byte, buf [%d] = %d\n", i, *buf);
-                usb_ep_set_halt (ep);
+                ERROR(dev, "bad OUT byte, buf[%d] = %d\n", i, *buf);
+                usb_ep_set_halt(ep);
                 return -EINVAL;
         }
         return 0;
@@ -512,7 +497,7 @@ static void reinit_write_data(struct usb_ep *ep, struct usb_request *req)
 
         switch (pattern) {
         case 0:
-                memset (req->buf, 0, req->length);
+                memset(req->buf, 0, req->length);
                 break;
         case 1:
                 for  (i = 0; i < req->length; i++)
@@ -525,7 +510,7 @@ static void reinit_write_data(struct usb_ep *ep, struct usb_request *req)
  * irq delay between end of one request and start of the next.
  * that prevents using hardware dma queues.
  */
-static void source_sink_complete (struct usb_ep *ep, struct usb_request *req)
+static void source_sink_complete(struct usb_ep *ep, struct usb_request *req)
 {
         struct zero_dev *dev = ep->driver_data;
         int             status = req->status;
@@ -534,8 +519,8 @@ static void source_sink_complete (struct usb_ep *ep, struct usb_request *req)
 
         case 0:                         /* normal completion? */
                 if (ep == dev->out_ep) {
-                        check_read_data (dev, ep, req);
-                        memset (req->buf, 0x55, req->length);
+                        check_read_data(dev, ep, req);
+                        memset(req->buf, 0x55, req->length);
                 } else
                         reinit_write_data(ep, req);
                 break;
@@ -544,11 +529,11 @@ static void source_sink_complete (struct usb_ep *ep, struct usb_request *req)
         case -ECONNABORTED:             /* hardware forced ep reset */
         case -ECONNRESET:               /* request dequeued */
         case -ESHUTDOWN:                /* disconnect from host */
-                VDBG (dev, "%s gone (%d), %d/%d\n", ep->name, status,
+                VDBG(dev, "%s gone (%d), %d/%d\n", ep->name, status,
                                 req->actual, req->length);
                 if (ep == dev->out_ep)
-                        check_read_data (dev, ep, req);
-                free_ep_req (ep, req);
+                        check_read_data(dev, ep, req);
+                free_ep_req(ep, req);
                 return;
 
         case -EOVERFLOW:                /* buffer overrun on read means that
@@ -557,18 +542,18 @@ static void source_sink_complete (struct usb_ep *ep, struct usb_request *req)
                                          */
         default:
 #if 1
-                DBG (dev, "%s complete --> %d, %d/%d\n", ep->name,
+                DBG(dev, "%s complete --> %d, %d/%d\n", ep->name,
                                 status, req->actual, req->length);
 #endif
         case -EREMOTEIO:                /* short read */
                 break;
         }
 
-        status = usb_ep_queue (ep, req, GFP_ATOMIC);
+        status = usb_ep_queue(ep, req, GFP_ATOMIC);
         if (status) {
-                ERROR (dev, "kill %s:  resubmit %d bytes --> %d\n",
+                ERROR(dev, "kill %s:  resubmit %d bytes --> %d\n",
                                 ep->name, req->length, status);
-                usb_ep_set_halt (ep);
+                usb_ep_set_halt(ep);
                 /* FIXME recover later ... somehow */
         }
 }
@@ -578,24 +563,24 @@ static struct usb_request *source_sink_start_ep(struct usb_ep *ep)
         struct usb_request      *req;
         int                     status;
 
-        req = alloc_ep_req (ep, buflen);
+        req = alloc_ep_req(ep, buflen);
         if (!req)
                 return NULL;
 
-        memset (req->buf, 0, req->length);
+        memset(req->buf, 0, req->length);
         req->complete = source_sink_complete;
 
-        if (strcmp (ep->name, EP_IN_NAME) == 0)
+        if (strcmp(ep->name, EP_IN_NAME) == 0)
                 reinit_write_data(ep, req);
         else
-                memset (req->buf, 0x55, req->length);
+                memset(req->buf, 0x55, req->length);
 
         status = usb_ep_queue(ep, req, GFP_ATOMIC);
         if (status) {
                 struct zero_dev *dev = ep->driver_data;
 
-                ERROR (dev, "start %s --> %d\n", ep->name, status);
-                free_ep_req (ep, req);
+                ERROR(dev, "start %s --> %d\n", ep->name, status);
+                free_ep_req(ep, req);
                 req = NULL;
         }
 
@@ -608,34 +593,34 @@ static int set_source_sink_config(struct zero_dev *dev)
         struct usb_ep           *ep;
         struct usb_gadget       *gadget = dev->gadget;
 
-        gadget_for_each_ep (ep, gadget) {
+        gadget_for_each_ep(ep, gadget) {
                 const struct usb_endpoint_descriptor    *d;
 
                 /* one endpoint writes (sources) zeroes in (to the host) */
-                if (strcmp (ep->name, EP_IN_NAME) == 0) {
-                        d = ep_desc (gadget, &hs_source_desc, &fs_source_desc);
-                        result = usb_ep_enable (ep, d);
+                if (strcmp(ep->name, EP_IN_NAME) == 0) {
+                        d = ep_desc(gadget, &hs_source_desc, &fs_source_desc);
+                        result = usb_ep_enable(ep, d);
                         if (result == 0) {
                                 ep->driver_data = dev;
                                 if (source_sink_start_ep(ep) != NULL) {
                                         dev->in_ep = ep;
                                         continue;
                                 }
-                                usb_ep_disable (ep);
+                                usb_ep_disable(ep);
                                 result = -EIO;
                         }
 
                 /* one endpoint reads (sinks) anything out (from the host) */
-                } else if (strcmp (ep->name, EP_OUT_NAME) == 0) {
-                        d = ep_desc (gadget, &hs_sink_desc, &fs_sink_desc);
-                        result = usb_ep_enable (ep, d);
+                } else if (strcmp(ep->name, EP_OUT_NAME) == 0) {
+                        d = ep_desc(gadget, &hs_sink_desc, &fs_sink_desc);
+                        result = usb_ep_enable(ep, d);
                         if (result == 0) {
                                 ep->driver_data = dev;
                                 if (source_sink_start_ep(ep) != NULL) {
                                         dev->out_ep = ep;
                                         continue;
                                 }
-                                usb_ep_disable (ep);
+                                usb_ep_disable(ep);
                                 result = -EIO;
                         }
 
@@ -644,11 +629,11 @@ static int set_source_sink_config(struct zero_dev *dev)
                         continue;
 
                 /* stop on error */
-                ERROR (dev, "can't start %s, result %d\n", ep->name, result);
+                ERROR(dev, "can't start %s, result %d\n", ep->name, result);
                 break;
         }
         if (result == 0)
-                DBG (dev, "buflen %d\n", buflen);
+                DBG(dev, "buflen %d\n", buflen);
 
         /* caller is responsible for cleanup on error */
         return result;
@@ -656,7 +641,7 @@ static int set_source_sink_config(struct zero_dev *dev)
 
 /*-------------------------------------------------------------------------*/
 
-static void loopback_complete (struct usb_ep *ep, struct usb_request *req)
+static void loopback_complete(struct usb_ep *ep, struct usb_request *req)
 {
         struct zero_dev *dev = ep->driver_data;
         int             status = req->status;
@@ -668,19 +653,19 @@ static void loopback_complete (struct usb_ep *ep, struct usb_request *req)
                         /* loop this OUT packet back IN to the host */
                         req->zero = (req->actual < req->length);
                         req->length = req->actual;
-                        status = usb_ep_queue (dev->in_ep, req, GFP_ATOMIC);
+                        status = usb_ep_queue(dev->in_ep, req, GFP_ATOMIC);
                         if (status == 0)
                                 return;
 
                         /* "should never get here" */
-                        ERROR (dev, "can't loop %s to %s: %d\n",
+                        ERROR(dev, "can't loop %s to %s: %d\n",
                                 ep->name, dev->in_ep->name,
                                 status);
                 }
 
                 /* queue the buffer for some later OUT packet */
                 req->length = buflen;
-                status = usb_ep_queue (dev->out_ep, req, GFP_ATOMIC);
+                status = usb_ep_queue(dev->out_ep, req, GFP_ATOMIC);
                 if (status == 0)
                         return;
 
@@ -688,7 +673,7 @@ static void loopback_complete (struct usb_ep *ep, struct usb_request *req)
                 /* FALLTHROUGH */
 
         default:
-                ERROR (dev, "%s loop complete --> %d, %d/%d\n", ep->name,
+                ERROR(dev, "%s loop complete --> %d, %d/%d\n", ep->name,
                                 status, req->actual, req->length);
                 /* FALLTHROUGH */
 
@@ -700,7 +685,7 @@ static void loopback_complete (struct usb_ep *ep, struct usb_request *req)
         case -ECONNABORTED:             /* hardware forced ep reset */
         case -ECONNRESET:               /* request dequeued */
         case -ESHUTDOWN:                /* disconnect from host */
-                free_ep_req (ep, req);
+                free_ep_req(ep, req);
                 return;
         }
 }
@@ -711,13 +696,13 @@ static int set_loopback_config(struct zero_dev *dev)
         struct usb_ep           *ep;
         struct usb_gadget       *gadget = dev->gadget;
 
-        gadget_for_each_ep (ep, gadget) {
+        gadget_for_each_ep(ep, gadget) {
                 const struct usb_endpoint_descriptor    *d;
 
                 /* one endpoint writes data back IN to the host */
-                if (strcmp (ep->name, EP_IN_NAME) == 0) {
-                        d = ep_desc (gadget, &hs_source_desc, &fs_source_desc);
-                        result = usb_ep_enable (ep, d);
+                if (strcmp(ep->name, EP_IN_NAME) == 0) {
+                        d = ep_desc(gadget, &hs_source_desc, &fs_source_desc);
+                        result = usb_ep_enable(ep, d);
                         if (result == 0) {
                                 ep->driver_data = dev;
                                 dev->in_ep = ep;
@@ -725,9 +710,9 @@ static int set_loopback_config(struct zero_dev *dev)
                         }
 
                 /* one endpoint just reads OUT packets */
-                } else if (strcmp (ep->name, EP_OUT_NAME) == 0) {
-                        d = ep_desc (gadget, &hs_sink_desc, &fs_sink_desc);
-                        result = usb_ep_enable (ep, d);
+                } else if (strcmp(ep->name, EP_OUT_NAME) == 0) {
+                        d = ep_desc(gadget, &hs_sink_desc, &fs_sink_desc);
+                        result = usb_ep_enable(ep, d);
                         if (result == 0) {
                                 ep->driver_data = dev;
                                 dev->out_ep = ep;
@@ -739,7 +724,7 @@ static int set_loopback_config(struct zero_dev *dev)
                         continue;
 
                 /* stop on error */
-                ERROR (dev, "can't enable %s, result %d\n", ep->name, result);
+                ERROR(dev, "can't enable %s, result %d\n", ep->name, result);
                 break;
         }
 
@@ -753,19 +738,19 @@ static int set_loopback_config(struct zero_dev *dev)
 
                 ep = dev->out_ep;
                 for (i = 0; i < qlen && result == 0; i++) {
-                        req = alloc_ep_req (ep, buflen);
+                        req = alloc_ep_req(ep, buflen);
                         if (req) {
                                 req->complete = loopback_complete;
-                                result = usb_ep_queue (ep, req, GFP_ATOMIC);
+                                result = usb_ep_queue(ep, req, GFP_ATOMIC);
                                 if (result)
-                                        DBG (dev, "%s queue req --> %d\n",
+                                        DBG(dev, "%s queue req --> %d\n",
                                                         ep->name, result);
                         } else
                                 result = -ENOMEM;
                 }
         }
         if (result == 0)
-                DBG (dev, "qlen %d, buflen %d\n", qlen, buflen);
+                DBG(dev, "qlen %d, buflen %d\n", qlen, buflen);
 
         /* caller is responsible for cleanup on error */
         return result;
@@ -773,26 +758,26 @@ static int set_loopback_config(struct zero_dev *dev)
 
 /*-------------------------------------------------------------------------*/
 
-static void zero_reset_config (struct zero_dev *dev)
+static void zero_reset_config(struct zero_dev *dev)
 {
         if (dev->config == 0)
                 return;
 
-        DBG (dev, "reset config\n");
+        DBG(dev, "reset config\n");
 
         /* just disable endpoints, forcing completion of pending i/o.
          * all our completion handlers free their requests in this case.
          */
         if (dev->in_ep) {
-                usb_ep_disable (dev->in_ep);
+                usb_ep_disable(dev->in_ep);
                 dev->in_ep = NULL;
         }
         if (dev->out_ep) {
-                usb_ep_disable (dev->out_ep);
+                usb_ep_disable(dev->out_ep);
                 dev->out_ep = NULL;
         }
         dev->config = 0;
-        del_timer (&dev->resume);
+        del_timer(&dev->resume);
 }
 
 /* change our operational config.  this code must agree with the code
@@ -813,12 +798,12 @@ static int zero_set_config(struct zero_dev *dev, unsigned number)
         if (number == dev->config)
                 return 0;
 
-        if (gadget_is_sa1100 (gadget) && dev->config) {
+        if (gadget_is_sa1100(gadget) && dev->config) {
                 /* tx fifo is full, but we can't clear it...*/
                 ERROR(dev, "can't change configurations\n");
                 return -ESPIPE;
         }
-        zero_reset_config (dev);
+        zero_reset_config(dev);
 
         switch (number) {
         case CONFIG_SOURCE_SINK:
@@ -837,7 +822,7 @@ static int zero_set_config(struct zero_dev *dev, unsigned number)
         if (!result && (!dev->in_ep || !dev->out_ep))
                 result = -ENODEV;
         if (result)
-                zero_reset_config (dev);
+                zero_reset_config(dev);
         else {
                 char *speed;
 
@@ -849,7 +834,7 @@ static int zero_set_config(struct zero_dev *dev, unsigned number)
                 }
 
                 dev->config = number;
-                INFO (dev, "%s speed config #%d: %s\n", speed, number,
+                INFO(dev, "%s speed config #%d: %s\n", speed, number,
                                 (number == CONFIG_SOURCE_SINK)
                                         ? source_sink : loopback);
         }
@@ -858,10 +843,10 @@ static int zero_set_config(struct zero_dev *dev, unsigned number)
 
 /*-------------------------------------------------------------------------*/
 
-static void zero_setup_complete (struct usb_ep *ep, struct usb_request *req)
+static void zero_setup_complete(struct usb_ep *ep, struct usb_request *req)
 {
         if (req->status || req->actual != req->length)
-                DBG ((struct zero_dev *) ep->driver_data,
+                DBG((struct zero_dev *) ep->driver_data,
                                 "setup complete --> %d, %d/%d\n",
                                 req->status, req->actual, req->length);
 }
@@ -874,9 +859,9 @@ static void zero_setup_complete (struct usb_ep *ep, struct usb_request *req)
  * the work is in config-specific setup.
  */
 static int
-zero_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
+zero_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
 {
-        struct zero_dev         *dev = get_gadget_data (gadget);
+        struct zero_dev         *dev = get_gadget_data(gadget);
         struct usb_request      *req = dev->req;
         int                     value = -EOPNOTSUPP;
         u16                     w_index = le16_to_cpu(ctrl->wIndex);
@@ -895,14 +880,14 @@ zero_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
                 switch (w_value >> 8) {
 
                 case USB_DT_DEVICE:
-                        value = min (w_length, (u16) sizeof device_desc);
-                        memcpy (req->buf, &device_desc, value);
+                        value = min(w_length, (u16) sizeof device_desc);
+                        memcpy(req->buf, &device_desc, value);
                         break;
                 case USB_DT_DEVICE_QUALIFIER:
                         if (!gadget_is_dualspeed(gadget))
                                 break;
-                        value = min (w_length, (u16) sizeof dev_qualifier);
-                        memcpy (req->buf, &dev_qualifier, value);
+                        value = min(w_length, (u16) sizeof dev_qualifier);
+                        memcpy(req->buf, &dev_qualifier, value);
                         break;
 
                 case USB_DT_OTHER_SPEED_CONFIG:
@@ -910,11 +895,11 @@ zero_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
                                 break;
                         // FALLTHROUGH
                 case USB_DT_CONFIG:
-                        value = config_buf (gadget, req->buf,
+                        value = config_buf(gadget, req->buf,
                                         w_value >> 8,
                                         w_value & 0xff);
                         if (value >= 0)
-                                value = min (w_length, (u16) value);
+                                value = min(w_length, (u16) value);
                         break;
 
                 case USB_DT_STRING:
@@ -923,10 +908,10 @@ zero_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
                          * add string tables for other languages, using
                          * any UTF-8 characters
                          */
-                        value = usb_gadget_get_string (&stringtab,
+                        value = usb_gadget_get_string(&stringtab,
                                         w_value & 0xff, req->buf);
                         if (value >= 0)
-                                value = min (w_length, (u16) value);
+                                value = min(w_length, (u16) value);
                         break;
                 }
                 break;
@@ -936,20 +921,20 @@ zero_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
                 if (ctrl->bRequestType != 0)
                         goto unknown;
                 if (gadget->a_hnp_support)
-                        DBG (dev, "HNP available\n");
+                        DBG(dev, "HNP available\n");
                 else if (gadget->a_alt_hnp_support)
-                        DBG (dev, "HNP needs a different root port\n");
+                        DBG(dev, "HNP needs a different root port\n");
                 else
-                        VDBG (dev, "HNP inactive\n");
-                spin_lock (&dev->lock);
+                        VDBG(dev, "HNP inactive\n");
+                spin_lock(&dev->lock);
                 value = zero_set_config(dev, w_value);
-                spin_unlock (&dev->lock);
+                spin_unlock(&dev->lock);
                 break;
         case USB_REQ_GET_CONFIGURATION:
                 if (ctrl->bRequestType != USB_DIR_IN)
                         goto unknown;
                 *(u8 *)req->buf = dev->config;
-                value = min (w_length, (u16) 1);
+                value = min(w_length, (u16) 1);
                 break;
 
         /* until we add altsetting support, or other interfaces,
@@ -959,7 +944,7 @@ zero_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
         case USB_REQ_SET_INTERFACE:
                 if (ctrl->bRequestType != USB_RECIP_INTERFACE)
                         goto unknown;
-                spin_lock (&dev->lock);
+                spin_lock(&dev->lock);
                 if (dev->config && w_index == 0 && w_value == 0) {
                         u8              config = dev->config;
 
@@ -970,11 +955,11 @@ zero_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
                          * if we had more than one interface we couldn't
                          * use this "reset the config" shortcut.
                          */
-                        zero_reset_config (dev);
+                        zero_reset_config(dev);
                         zero_set_config(dev, config);
                         value = 0;
                 }
-                spin_unlock (&dev->lock);
+                spin_unlock(&dev->lock);
                 break;
         case USB_REQ_GET_INTERFACE:
                 if (ctrl->bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE))
@@ -986,7 +971,7 @@ zero_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
                         break;
                 }
                 *(u8 *)req->buf = 0;
-                value = min (w_length, (u16) 1);
+                value = min(w_length, (u16) 1);
                 break;
 
         /*
@@ -1018,7 +1003,7 @@ zero_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
 
         default:
 unknown:
-                VDBG (dev,
+                VDBG(dev,
                         "unknown control req%02x.%02x v%04x i%04x l%d\n",
                         ctrl->bRequestType, ctrl->bRequest,
                         w_value, w_index, w_length);
@@ -1028,11 +1013,11 @@ unknown:
         if (value >= 0) {
                 req->length = value;
                 req->zero = value < w_length;
-                value = usb_ep_queue (gadget->ep0, req, GFP_ATOMIC);
+                value = usb_ep_queue(gadget->ep0, req, GFP_ATOMIC);
                 if (value < 0) {
-                        DBG (dev, "ep_queue --> %d\n", value);
+                        DBG(dev, "ep_queue --> %d\n", value);
                         req->status = 0;
-                        zero_setup_complete (gadget->ep0, req);
+                        zero_setup_complete(gadget->ep0, req);
                 }
         }
 
@@ -1040,28 +1025,26 @@ unknown:
         return value;
 }
 
-static void
-zero_disconnect (struct usb_gadget *gadget)
+static void zero_disconnect(struct usb_gadget *gadget)
 {
-        struct zero_dev         *dev = get_gadget_data (gadget);
+        struct zero_dev         *dev = get_gadget_data(gadget);
         unsigned long           flags;
 
-        spin_lock_irqsave (&dev->lock, flags);
-        zero_reset_config (dev);
+        spin_lock_irqsave(&dev->lock, flags);
+        zero_reset_config(dev);
 
         /* a more significant application might have some non-usb
          * activities to quiesce here, saving resources like power
          * or pushing the notification up a network stack.
          */
-        spin_unlock_irqrestore (&dev->lock, flags);
+        spin_unlock_irqrestore(&dev->lock, flags);
 
         /* next we may get setup() calls to enumerate new connections;
          * or an unbind() during shutdown (including removing module).
          */
 }
 
-static void
-zero_autoresume (unsigned long _dev)
+static void zero_autoresume(unsigned long _dev)
 {
         struct zero_dev *dev = (struct zero_dev *) _dev;
         int             status;
@@ -1070,32 +1053,30 @@ zero_autoresume (unsigned long _dev)
          * more significant than just a timer firing...
          */
         if (dev->gadget->speed != USB_SPEED_UNKNOWN) {
-                status = usb_gadget_wakeup (dev->gadget);
-                DBG (dev, "wakeup --> %d\n", status);
+                status = usb_gadget_wakeup(dev->gadget);
+                DBG(dev, "wakeup --> %d\n", status);
         }
 }
 
 /*-------------------------------------------------------------------------*/
 
-static void /* __init_or_exit */
-zero_unbind (struct usb_gadget *gadget)
+static void zero_unbind(struct usb_gadget *gadget)
 {
-        struct zero_dev         *dev = get_gadget_data (gadget);
+        struct zero_dev         *dev = get_gadget_data(gadget);
 
-        DBG (dev, "unbind\n");
+        DBG(dev, "unbind\n");
 
         /* we've already been disconnected ... no i/o is active */
         if (dev->req) {
                 dev->req->length = USB_BUFSIZ;
-                free_ep_req (gadget->ep0, dev->req);
+                free_ep_req(gadget->ep0, dev->req);
         }
-        del_timer_sync (&dev->resume);
-        kfree (dev);
-        set_gadget_data (gadget, NULL);
+        del_timer_sync(&dev->resume);
+        kfree(dev);
+        set_gadget_data(gadget, NULL);
 }
 
-static int __init
-zero_bind (struct usb_gadget *gadget)
+static int __init zero_bind(struct usb_gadget *gadget)
 {
         struct zero_dev         *dev;
         struct usb_ep           *ep;
@@ -1111,8 +1092,8 @@ zero_bind (struct usb_gadget *gadget)
          * autoconfigure on any sane usb controller driver,
          * but there may also be important quirks to address.
          */
-        usb_ep_autoconfig_reset (gadget);
-        ep = usb_ep_autoconfig (gadget, &fs_source_desc);
+        usb_ep_autoconfig_reset(gadget);
+        ep = usb_ep_autoconfig(gadget, &fs_source_desc);
         if (!ep) {
 autoconf_fail:
                 pr_err("%s: can't autoconfigure on %s\n",
@@ -1122,15 +1103,15 @@ autoconf_fail:
         EP_IN_NAME = ep->name;
         ep->driver_data = ep;   /* claim */
 
-        ep = usb_ep_autoconfig (gadget, &fs_sink_desc);
+        ep = usb_ep_autoconfig(gadget, &fs_sink_desc);
         if (!ep)
                 goto autoconf_fail;
         EP_OUT_NAME = ep->name;
         ep->driver_data = ep;   /* claim */
 
-        gcnum = usb_gadget_controller_number (gadget);
+        gcnum = usb_gadget_controller_number(gadget);
         if (gcnum >= 0)
-                device_desc.bcdDevice = cpu_to_le16 (0x0200 + gcnum);
+                device_desc.bcdDevice = cpu_to_le16(0x0200 + gcnum);
         else {
                 /* gadget zero is so simple (for now, no altsettings) that
                  * it SHOULD NOT have problems with bulk-capable hardware.
@@ -1141,7 +1122,7 @@ autoconf_fail:
                  */
                 pr_warning("%s: controller '%s' not recognized\n",
                         shortname, gadget->name);
-                device_desc.bcdDevice = __constant_cpu_to_le16 (0x9999);
+                device_desc.bcdDevice = __constant_cpu_to_le16(0x9999);
         }
 
 
@@ -1149,12 +1130,16 @@ autoconf_fail:
         dev = kzalloc(sizeof(*dev), GFP_KERNEL);
         if (!dev)
                 return -ENOMEM;
-        spin_lock_init (&dev->lock);
+        spin_lock_init(&dev->lock);
         dev->gadget = gadget;
-        set_gadget_data (gadget, dev);
+        set_gadget_data(gadget, dev);
+
+        init_timer(&dev->resume);
+        dev->resume.function = zero_autoresume;
+        dev->resume.data = (unsigned long) dev;
 
         /* preallocate control response and buffer */
-        dev->req = usb_ep_alloc_request (gadget->ep0, GFP_KERNEL);
+        dev->req = usb_ep_alloc_request(gadget->ep0, GFP_KERNEL);
         if (!dev->req)
                 goto enomem;
         dev->req->buf = kmalloc(USB_BUFSIZ, GFP_KERNEL);
@@ -1182,11 +1167,8 @@ autoconf_fail:
                 loopback_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
         }
 
-        usb_gadget_set_selfpowered (gadget);
+        usb_gadget_set_selfpowered(gadget);
 
-        init_timer (&dev->resume);
-        dev->resume.function = zero_autoresume;
-        dev->resume.data = (unsigned long) dev;
         if (autoresume) {
                 source_sink_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
                 loopback_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
@@ -1194,45 +1176,43 @@ autoconf_fail:
 
         gadget->ep0->driver_data = dev;
 
-        INFO (dev, "%s, version: " DRIVER_VERSION "\n", longname);
-        INFO (dev, "using %s, OUT %s IN %s\n", gadget->name,
+        INFO(dev, "%s, version: " DRIVER_VERSION "\n", longname);
+        INFO(dev, "using %s, OUT %s IN %s\n", gadget->name,
                 EP_OUT_NAME, EP_IN_NAME);
 
-        snprintf (manufacturer, sizeof manufacturer, "%s %s with %s",
+        snprintf(manufacturer, sizeof manufacturer, "%s %s with %s",
                 init_utsname()->sysname, init_utsname()->release,
                 gadget->name);
 
         return 0;
 
 enomem:
-        zero_unbind (gadget);
+        zero_unbind(gadget);
         return -ENOMEM;
 }
 
 /*-------------------------------------------------------------------------*/
 
-static void
-zero_suspend (struct usb_gadget *gadget)
+static void zero_suspend(struct usb_gadget *gadget)
 {
-        struct zero_dev         *dev = get_gadget_data (gadget);
+        struct zero_dev         *dev = get_gadget_data(gadget);
 
         if (gadget->speed == USB_SPEED_UNKNOWN)
                 return;
 
         if (autoresume) {
-                mod_timer (&dev->resume, jiffies + (HZ * autoresume));
-                DBG (dev, "suspend, wakeup in %d seconds\n", autoresume);
+                mod_timer(&dev->resume, jiffies + (HZ * autoresume));
+                DBG(dev, "suspend, wakeup in %d seconds\n", autoresume);
         } else
-                DBG (dev, "suspend\n");
+                DBG(dev, "suspend\n");
 }
 
-static void
-zero_resume (struct usb_gadget *gadget)
+static void zero_resume(struct usb_gadget *gadget)
 {
-        struct zero_dev         *dev = get_gadget_data (gadget);
+        struct zero_dev         *dev = get_gadget_data(gadget);
 
-        DBG (dev, "resume\n");
-        del_timer (&dev->resume);
+        DBG(dev, "resume\n");
+        del_timer(&dev->resume);
 }
 
 
@@ -1264,15 +1244,15 @@ MODULE_AUTHOR("David Brownell");
 MODULE_LICENSE("GPL");
 
 
-static int __init init (void)
+static int __init init(void)
 {
-        return usb_gadget_register_driver (&zero_driver);
+        return usb_gadget_register_driver(&zero_driver);
 }
-module_init (init);
+module_init(init);
 
-static void __exit cleanup (void)
+static void __exit cleanup(void)
 {
-        usb_gadget_unregister_driver (&zero_driver);
+        usb_gadget_unregister_driver(&zero_driver);
 }
-module_exit (cleanup);
+module_exit(cleanup);
 
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 0b87480dd713..33b467a8352d 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -4,6 +4,19 @@
 comment "USB Host Controller Drivers"
         depends on USB
 
+config USB_C67X00_HCD
+        tristate "Cypress C67x00 HCD support"
+        depends on USB
+        help
+          The Cypress C67x00 (EZ-Host/EZ-OTG) chips are dual-role
+          host/peripheral/OTG USB controllers.
+
+          Enable this option to support this chip in host controller mode.
+          If unsure, say N.
+
+          To compile this driver as a module, choose M here: the
+          module will be called c67x00.
+
 config USB_EHCI_HCD
         tristate "EHCI HCD (USB 2.0) support"
         depends on USB && USB_ARCH_HAS_EHCI
@@ -95,6 +108,32 @@ config USB_ISP116X_HCD
           To compile this driver as a module, choose M here: the
           module will be called isp116x-hcd.
 
+config USB_ISP1760_HCD
+        tristate "ISP 1760 HCD support"
+        depends on USB && EXPERIMENTAL
+        ---help---
+          The ISP1760 chip is a USB 2.0 host controller.
+
+          This driver does not support isochronous transfers or OTG.
+
+          To compile this driver as a module, choose M here: the
+          module will be called isp1760-hcd.
+
+config USB_ISP1760_PCI
+        bool "Support for the PCI bus"
+        depends on USB_ISP1760_HCD && PCI
+        ---help---
+          Enables support for the device present on the PCI bus.
+          This should only be required if you happen to have the eval kit from
+          NXP and you are going to test it.
+
+config USB_ISP1760_OF
+        bool "Support for the OF platform bus"
+        depends on USB_ISP1760_HCD && OF
+        ---help---
+          Enables support for the device present on the PowerPC
+          OpenFirmware platform bus.
+
 config USB_OHCI_HCD
         tristate "OHCI HCD support"
         depends on USB && USB_ARCH_HAS_OHCI
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index bb8e9d44f371..f1edda2dcfde 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -6,6 +6,8 @@ ifeq ($(CONFIG_USB_DEBUG),y)
         EXTRA_CFLAGS            += -DDEBUG
 endif
 
+isp1760-objs := isp1760-hcd.o isp1760-if.o
+
 obj-$(CONFIG_PCI)               += pci-quirks.o
 
 obj-$(CONFIG_USB_EHCI_HCD)      += ehci-hcd.o
@@ -16,4 +18,4 @@ obj-$(CONFIG_USB_SL811_HCD)	+= sl811-hcd.o
 obj-$(CONFIG_USB_SL811_CS)      += sl811_cs.o
 obj-$(CONFIG_USB_U132_HCD)      += u132-hcd.o
 obj-$(CONFIG_USB_R8A66597_HCD)  += r8a66597-hcd.o
-
+obj-$(CONFIG_USB_ISP1760_HCD)   += isp1760.o
diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c
new file mode 100644
index 000000000000..4ba96c1e060c
--- /dev/null
+++ b/drivers/usb/host/isp1760-hcd.c
@@ -0,0 +1,2231 @@
+/*
+ * Driver for the NXP ISP1760 chip
+ *
+ * However, the code might contain some bugs. What doesn't work for sure is:
+ * - ISO
+ * - OTG
+ e The interrupt line is configured as active low, level.
+ *
+ * (c) 2007 Sebastian Siewior <bigeasy@linutronix.de>
+ *
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/usb.h>
+#include <linux/debugfs.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
+#include <asm/unaligned.h>
+
+#include "../core/hcd.h"
+#include "isp1760-hcd.h"
+
+static struct kmem_cache *qtd_cachep;
+static struct kmem_cache *qh_cachep;
+
+struct isp1760_hcd {
+        u32 hcs_params;
+        spinlock_t              lock;
+        struct inter_packet_info atl_ints[32];
+        struct inter_packet_info int_ints[32];
+        struct memory_chunk memory_pool[BLOCKS];
+
+        /* periodic schedule support */
+#define DEFAULT_I_TDPS          1024
+        unsigned                periodic_size;
+        unsigned                i_thresh;
+        unsigned long           reset_done;
+        unsigned long           next_statechange;
+};
+
+static inline struct isp1760_hcd *hcd_to_priv(struct usb_hcd *hcd)
+{
+        return (struct isp1760_hcd *) (hcd->hcd_priv);
+}
+static inline struct usb_hcd *priv_to_hcd(struct isp1760_hcd *priv)
+{
+        return container_of((void *) priv, struct usb_hcd, hcd_priv);
+}
+
+/* Section 2.2 Host Controller Capability Registers */
+#define HC_LENGTH(p)            (((p)>>00)&0x00ff)      /* bits 7:0 */
+#define HC_VERSION(p)           (((p)>>16)&0xffff)      /* bits 31:16 */
+#define HCS_INDICATOR(p)        ((p)&(1 << 16)) /* true: has port indicators */
+#define HCS_PPC(p)              ((p)&(1 << 4))  /* true: port power control */
+#define HCS_N_PORTS(p)          (((p)>>0)&0xf)  /* bits 3:0, ports on HC */
+#define HCC_ISOC_CACHE(p)       ((p)&(1 << 7))  /* true: can cache isoc frame */
+#define HCC_ISOC_THRES(p)       (((p)>>4)&0x7)  /* bits 6:4, uframes cached */
+
+/* Section 2.3 Host Controller Operational Registers */
+#define CMD_LRESET      (1<<7)          /* partial reset (no ports, etc) */
+#define CMD_RESET       (1<<1)          /* reset HC not bus */
+#define CMD_RUN         (1<<0)          /* start/stop HC */
+#define STS_PCD         (1<<2)          /* port change detect */
+#define FLAG_CF         (1<<0)          /* true: we'll support "high speed" */
+
+#define PORT_OWNER      (1<<13)         /* true: companion hc owns this port */
+#define PORT_POWER      (1<<12)         /* true: has power (see PPC) */
+#define PORT_USB11(x) (((x) & (3 << 10)) == (1 << 10))  /* USB 1.1 device */
+#define PORT_RESET      (1<<8)          /* reset port */
+#define PORT_SUSPEND    (1<<7)          /* suspend port */
+#define PORT_RESUME     (1<<6)          /* resume it */
+#define PORT_PE         (1<<2)          /* port enable */
+#define PORT_CSC        (1<<1)          /* connect status change */
+#define PORT_CONNECT    (1<<0)          /* device connected */
+#define PORT_RWC_BITS   (PORT_CSC)
+
+struct isp1760_qtd {
+        struct isp1760_qtd *hw_next;
+        u8 packet_type;
+        u8 toggle;
+
+        void *data_buffer;
+        /* the rest is HCD-private */
+        struct list_head qtd_list;
+        struct urb *urb;
+        size_t length;
+
+        /* isp special*/
+        u32 status;
+#define URB_COMPLETE_NOTIFY     (1 << 0)
+#define URB_ENQUEUED            (1 << 1)
+#define URB_TYPE_ATL            (1 << 2)
+#define URB_TYPE_INT            (1 << 3)
+};
+
+struct isp1760_qh {
+        /* first part defined by EHCI spec */
+        struct list_head qtd_list;
+        struct isp1760_hcd *priv;
+
+        /* periodic schedule info */
+        unsigned short period;          /* polling interval */
+        struct usb_device *dev;
+
+        u32 toggle;
+        u32 ping;
+};
+
+#define ehci_port_speed(priv, portsc) (1 << USB_PORT_FEAT_HIGHSPEED)
+
+static unsigned int isp1760_readl(__u32 __iomem *regs)
+{
+        return readl(regs);
+}
+
+static void isp1760_writel(const unsigned int val, __u32 __iomem *regs)
+{
+        writel(val, regs);
+}
+
+/*
+ * The next two copy via MMIO data to/from the device. memcpy_{to|from}io()
+ * doesn't quite work because some people have to enforce 32-bit access
+ */
+static void priv_read_copy(struct isp1760_hcd *priv, u32 *src,
+                __u32 __iomem *dst, u32 offset, u32 len)
+{
+        struct usb_hcd *hcd = priv_to_hcd(priv);
+        u32 val;
+        u8 *buff8;
+
+        if (!src) {
+                printk(KERN_ERR "ERROR: buffer: %p len: %d\n", src, len);
+                return;
+        }
+        isp1760_writel(offset,  hcd->regs + HC_MEMORY_REG);
+        /* XXX
+         * 90nsec delay, the spec says something how this could be avoided.
+         */
+        mdelay(1);
+
+        while (len >= 4) {
+                *src = __raw_readl(dst);
+                len -= 4;
+                src++;
+                dst++;
+        }
+
+        if (!len)
+                return;
+
+        /* in case we have 3, 2 or 1 by left. The dst buffer may not be fully
+         * allocated.
+         */
+        val = isp1760_readl(dst);
+
+        buff8 = (u8 *)src;
+        while (len) {
+
+                *buff8 = val;
+                val >>= 8;
+                len--;
+                buff8++;
+        }
+}
+
+static void priv_write_copy(const struct isp1760_hcd *priv, const u32 *src,
+                __u32 __iomem *dst, u32 len)
+{
+        while (len >= 4) {
+                __raw_writel(*src, dst);
+                len -= 4;
+                src++;
+                dst++;
+        }
+
+        if (!len)
+                return;
+        /* in case we have 3, 2 or 1 by left. The buffer is allocated and the
+         * extra bytes should not be read by the HW
+         */
+
+        __raw_writel(*src, dst);
+}
+
+/* memory management of the 60kb on the chip from 0x1000 to 0xffff */
+static void init_memory(struct isp1760_hcd *priv)
+{
+        int i;
+        u32 payload;
+
+        payload = 0x1000;
+        for (i = 0; i < BLOCK_1_NUM; i++) {
+                priv->memory_pool[i].start = payload;
+                priv->memory_pool[i].size = BLOCK_1_SIZE;
+                priv->memory_pool[i].free = 1;
+                payload += priv->memory_pool[i].size;
+        }
+
+
+        for (i = BLOCK_1_NUM; i < BLOCK_1_NUM + BLOCK_2_NUM; i++) {
+                priv->memory_pool[i].start = payload;
+                priv->memory_pool[i].size = BLOCK_2_SIZE;
+                priv->memory_pool[i].free = 1;
+                payload += priv->memory_pool[i].size;
+        }
+
+
+        for (i = BLOCK_1_NUM + BLOCK_2_NUM; i < BLOCKS; i++) {
+                priv->memory_pool[i].start = payload;
+                priv->memory_pool[i].size = BLOCK_3_SIZE;
+                priv->memory_pool[i].free = 1;
+                payload += priv->memory_pool[i].size;
+        }
+
+        BUG_ON(payload - priv->memory_pool[i - 1].size > PAYLOAD_SIZE);
+}
+
+static u32 alloc_mem(struct isp1760_hcd *priv, u32 size)
+{
+        int i;
+
+        if (!size)
+                return ISP1760_NULL_POINTER;
+
+        for (i = 0; i < BLOCKS; i++) {
+                if (priv->memory_pool[i].size >= size &&
+                                priv->memory_pool[i].free) {
+
+                        priv->memory_pool[i].free = 0;
+                        return priv->memory_pool[i].start;
+                }
+        }
+
+        printk(KERN_ERR "ISP1760 MEM: can not allocate %d bytes of memory\n",
+                        size);
+        printk(KERN_ERR "Current memory map:\n");
+        for (i = 0; i < BLOCKS; i++) {
+                printk(KERN_ERR "Pool %2d size %4d status: %d\n",
+                                i, priv->memory_pool[i].size,
+                                priv->memory_pool[i].free);
+        }
+        /* XXX maybe -ENOMEM could be possible */
+        BUG();
+        return 0;
+}
+
+static void free_mem(struct isp1760_hcd *priv, u32 mem)
+{
+        int i;
+
+        if (mem == ISP1760_NULL_POINTER)
+                return;
+
+        for (i = 0; i < BLOCKS; i++) {
+                if (priv->memory_pool[i].start == mem) {
+
+                        BUG_ON(priv->memory_pool[i].free);
+
+                        priv->memory_pool[i].free = 1;
+                        return ;
+                }
+        }
+
+        printk(KERN_ERR "Trying to free not-here-allocated memory :%08x\n",
+                        mem);
+        BUG();
+}
+
+static void isp1760_init_regs(struct usb_hcd *hcd)
+{
+        isp1760_writel(0, hcd->regs + HC_BUFFER_STATUS_REG);
+        isp1760_writel(NO_TRANSFER_ACTIVE, hcd->regs +
+                        HC_ATL_PTD_SKIPMAP_REG);
+        isp1760_writel(NO_TRANSFER_ACTIVE, hcd->regs +
+                        HC_INT_PTD_SKIPMAP_REG);
+        isp1760_writel(NO_TRANSFER_ACTIVE, hcd->regs +
+                        HC_ISO_PTD_SKIPMAP_REG);
+
+        isp1760_writel(~NO_TRANSFER_ACTIVE, hcd->regs +
+                        HC_ATL_PTD_DONEMAP_REG);
+        isp1760_writel(~NO_TRANSFER_ACTIVE, hcd->regs +
+                        HC_INT_PTD_DONEMAP_REG);
+        isp1760_writel(~NO_TRANSFER_ACTIVE, hcd->regs +
+                        HC_ISO_PTD_DONEMAP_REG);
+}
+
+static int handshake(struct isp1760_hcd *priv, void __iomem *ptr,
+                      u32 mask, u32 done, int usec)
+{
+        u32 result;
+
+        do {
+                result = isp1760_readl(ptr);
+                if (result == ~0)
+                        return -ENODEV;
+                result &= mask;
+                if (result == done)
+                        return 0;
+                udelay(1);
+                usec--;
+        } while (usec > 0);
+        return -ETIMEDOUT;
+}
+
+/* reset a non-running (STS_HALT == 1) controller */
+static int ehci_reset(struct isp1760_hcd *priv)
+{
+        int retval;
+        struct usb_hcd *hcd = priv_to_hcd(priv);
+        u32 command = isp1760_readl(hcd->regs + HC_USBCMD);
+
+        command |= CMD_RESET;
+        isp1760_writel(command, hcd->regs + HC_USBCMD);
+        hcd->state = HC_STATE_HALT;
+        priv->next_statechange = jiffies;
+        retval = handshake(priv, hcd->regs + HC_USBCMD,
+                            CMD_RESET, 0, 250 * 1000);
+        return retval;
+}
+
+static void qh_destroy(struct isp1760_qh *qh)
+{
+        BUG_ON(!list_empty(&qh->qtd_list));
+        kmem_cache_free(qh_cachep, qh);
+}
+
+static struct isp1760_qh *isp1760_qh_alloc(struct isp1760_hcd *priv,
+                gfp_t flags)
+{
+        struct isp1760_qh *qh;
+
+        qh = kmem_cache_zalloc(qh_cachep, flags);
+        if (!qh)
+                return qh;
+
+        INIT_LIST_HEAD(&qh->qtd_list);
+        qh->priv = priv;
+        return qh;
+}
+
+/* magic numbers that can affect system performance */
+#define EHCI_TUNE_CERR          3       /* 0-3 qtd retries; 0 == don't stop */
+#define EHCI_TUNE_RL_HS         4       /* nak throttle; see 4.9 */
+#define EHCI_TUNE_RL_TT         0
+#define EHCI_TUNE_MULT_HS       1       /* 1-3 transactions/uframe; 4.10.3 */
+#define EHCI_TUNE_MULT_TT       1
+#define EHCI_TUNE_FLS           2       /* (small) 256 frame schedule */
+
+/* one-time init, only for memory state */
+static int priv_init(struct usb_hcd *hcd)
+{
+        struct isp1760_hcd              *priv = hcd_to_priv(hcd);
+        u32                     hcc_params;
+
+        spin_lock_init(&priv->lock);
+
+        /*
+         * hw default: 1K periodic list heads, one per frame.
+         * periodic_size can shrink by USBCMD update if hcc_params allows.
+         */
+        priv->periodic_size = DEFAULT_I_TDPS;
+
+        /* controllers may cache some of the periodic schedule ... */
+        hcc_params = isp1760_readl(hcd->regs + HC_HCCPARAMS);
+        /* full frame cache */
+        if (HCC_ISOC_CACHE(hcc_params))
+                priv->i_thresh = 8;
+        else /* N microframes cached */
+                priv->i_thresh = 2 + HCC_ISOC_THRES(hcc_params);
+
+        return 0;
+}
+
+static int isp1760_hc_setup(struct usb_hcd *hcd)
+{
+        struct isp1760_hcd *priv = hcd_to_priv(hcd);
+        int result;
+        u32 scratch;
+
+        isp1760_writel(0xdeadbabe, hcd->regs + HC_SCRATCH_REG);
+        scratch = isp1760_readl(hcd->regs + HC_SCRATCH_REG);
+        if (scratch != 0xdeadbabe) {
+                printk(KERN_ERR "ISP1760: Scratch test failed.\n");
+                return -ENODEV;
+        }
+
+        /* pre reset */
+        isp1760_init_regs(hcd);
+
+        /* reset */
+        isp1760_writel(SW_RESET_RESET_ALL, hcd->regs + HC_RESET_REG);
+        mdelay(100);
+
+        isp1760_writel(SW_RESET_RESET_HC, hcd->regs + HC_RESET_REG);
+        mdelay(100);
+
+        result = ehci_reset(priv);
+        if (result)
+                return result;
+
+        /* Step 11 passed */
+
+        isp1760_writel(INTERRUPT_ENABLE_MASK, hcd->regs + HC_INTERRUPT_REG);
+        isp1760_writel(INTERRUPT_ENABLE_MASK, hcd->regs + HC_INTERRUPT_ENABLE);
+
+        /* ATL reset */
+        scratch = isp1760_readl(hcd->regs + HC_HW_MODE_CTRL);
+        isp1760_writel(scratch | ALL_ATX_RESET, hcd->regs + HC_HW_MODE_CTRL);
+        mdelay(10);
+        isp1760_writel(scratch, hcd->regs + HC_HW_MODE_CTRL);
+
+        isp1760_writel(PORT1_POWER | PORT1_INIT2, hcd->regs + HC_PORT1_CTRL);
+        mdelay(10);
+
+        priv->hcs_params = isp1760_readl(hcd->regs + HC_HCSPARAMS);
+
+        return priv_init(hcd);
+}
+
+static void isp1760_init_maps(struct usb_hcd *hcd)
+{
+        /*set last maps, for iso its only 1, else 32 tds bitmap*/
+        isp1760_writel(0x80000000, hcd->regs + HC_ATL_PTD_LASTPTD_REG);
+        isp1760_writel(0x80000000, hcd->regs + HC_INT_PTD_LASTPTD_REG);
+        isp1760_writel(0x00000001, hcd->regs + HC_ISO_PTD_LASTPTD_REG);
+}
+
+static void isp1760_enable_interrupts(struct usb_hcd *hcd)
+{
+        isp1760_writel(0, hcd->regs + HC_ATL_IRQ_MASK_AND_REG);
+        isp1760_writel(0, hcd->regs + HC_ATL_IRQ_MASK_OR_REG);
+        isp1760_writel(0, hcd->regs + HC_INT_IRQ_MASK_AND_REG);
+        isp1760_writel(0, hcd->regs + HC_INT_IRQ_MASK_OR_REG);
+        isp1760_writel(0, hcd->regs + HC_ISO_IRQ_MASK_AND_REG);
+        isp1760_writel(0xffffffff, hcd->regs + HC_ISO_IRQ_MASK_OR_REG);
+        /* step 23 passed */
+}
+
+static int isp1760_run(struct usb_hcd *hcd)
+{
+        struct isp1760_hcd *priv = hcd_to_priv(hcd);
+        int retval;
+        u32 temp;
+        u32 command;
+        u32 chipid;
+
+        hcd->uses_new_polling = 1;
+        hcd->poll_rh = 0;
+
+        hcd->state = HC_STATE_RUNNING;
+        isp1760_enable_interrupts(hcd);
+        temp = isp1760_readl(hcd->regs + HC_HW_MODE_CTRL);
+        temp |= FINAL_HW_CONFIG;
+        isp1760_writel(temp, hcd->regs + HC_HW_MODE_CTRL);
+
+        command = isp1760_readl(hcd->regs + HC_USBCMD);
+        command &= ~(CMD_LRESET|CMD_RESET);
+        command |= CMD_RUN;
+        isp1760_writel(command, hcd->regs + HC_USBCMD);
+
+        retval = handshake(priv, hcd->regs + HC_USBCMD, CMD_RUN, CMD_RUN,
+                        250 * 1000);
+        if (retval)
+                return retval;
+
+        /*
+         * XXX
+         * Spec says to write FLAG_CF as last config action, priv code grabs
+         * the semaphore while doing so.
+         */
+        down_write(&ehci_cf_port_reset_rwsem);
+        isp1760_writel(FLAG_CF, hcd->regs + HC_CONFIGFLAG);
+
+        retval = handshake(priv, hcd->regs + HC_CONFIGFLAG, FLAG_CF, FLAG_CF,
+                        250 * 1000);
+        up_write(&ehci_cf_port_reset_rwsem);
+        if (retval)
+                return retval;
+
+        chipid = isp1760_readl(hcd->regs + HC_CHIP_ID_REG);
+        isp1760_info(priv, "USB ISP %04x HW rev. %d started\n", chipid & 0xffff,
+                        chipid >> 16);
+
+        /* PTD Register Init Part 2, Step 28 */
+        /* enable INTs */
+        isp1760_init_maps(hcd);
+
+        /* GRR this is run-once init(), being done every time the HC starts.
+         * So long as they're part of class devices, we can't do it init()
+         * since the class device isn't created that early.
+         */
+        return 0;
+}
+
+static u32 base_to_chip(u32 base)
+{
+        return ((base - 0x400) >> 3);
+}
+
+static void transform_into_atl(struct isp1760_hcd *priv, struct isp1760_qh *qh,
+                        struct isp1760_qtd *qtd, struct urb *urb,
+                        u32 payload, struct ptd *ptd)
+{
+        u32 dw0;
+        u32 dw1;
+        u32 dw2;
+        u32 dw3;
+        u32 maxpacket;
+        u32 multi;
+        u32 pid_code;
+        u32 rl = RL_COUNTER;
+        u32 nak = NAK_COUNTER;
+
+        /* according to 3.6.2, max packet len can not be > 0x400 */
+        maxpacket = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe));
+        multi =  1 + ((maxpacket >> 11) & 0x3);
+        maxpacket &= 0x7ff;
+
+        /* DW0 */
+        dw0 = PTD_VALID;
+        dw0 |= PTD_LENGTH(qtd->length);
+        dw0 |= PTD_MAXPACKET(maxpacket);
+        dw0 |= PTD_ENDPOINT(usb_pipeendpoint(urb->pipe));
+        dw1 = usb_pipeendpoint(urb->pipe) >> 1;
+
+        /* DW1 */
+        dw1 |= PTD_DEVICE_ADDR(usb_pipedevice(urb->pipe));
+
+        pid_code = qtd->packet_type;
+        dw1 |= PTD_PID_TOKEN(pid_code);
+
+        if (usb_pipebulk(urb->pipe))
+                dw1 |= PTD_TRANS_BULK;
+        else if  (usb_pipeint(urb->pipe))
+                dw1 |= PTD_TRANS_INT;
+
+        if (urb->dev->speed != USB_SPEED_HIGH) {
+                /* split transaction */
+
+                dw1 |= PTD_TRANS_SPLIT;
+                if (urb->dev->speed == USB_SPEED_LOW)
+                        dw1 |= PTD_SE_USB_LOSPEED;
+
+                dw1 |= PTD_PORT_NUM(urb->dev->ttport);
+                dw1 |= PTD_HUB_NUM(urb->dev->tt->hub->devnum);
+
+                /* SE bit for Split INT transfers */
+                if (usb_pipeint(urb->pipe) &&
+                                (urb->dev->speed == USB_SPEED_LOW))
+                        dw1 |= 2 << 16;
+
+                dw3 = 0;
+                rl = 0;
+                nak = 0;
+        } else {
+                dw0 |= PTD_MULTI(multi);
+                if (usb_pipecontrol(urb->pipe) || usb_pipebulk(urb->pipe))
+                        dw3 = qh->ping;
+                else
+                        dw3 = 0;
+        }
+        /* DW2 */
+        dw2 = 0;
+        dw2 |= PTD_DATA_START_ADDR(base_to_chip(payload));
+        dw2 |= PTD_RL_CNT(rl);
+        dw3 |= PTD_NAC_CNT(nak);
+
+        /* DW3 */
+        if (usb_pipecontrol(urb->pipe))
+                dw3 |= PTD_DATA_TOGGLE(qtd->toggle);
+        else
+                dw3 |= qh->toggle;
+
+
+        dw3 |= PTD_ACTIVE;
+        /* Cerr */
+        dw3 |= PTD_CERR(ERR_COUNTER);
+
+        memset(ptd, 0, sizeof(*ptd));
+
+        ptd->dw0 = cpu_to_le32(dw0);
+        ptd->dw1 = cpu_to_le32(dw1);
+        ptd->dw2 = cpu_to_le32(dw2);
+        ptd->dw3 = cpu_to_le32(dw3);
+}
+
+static void transform_add_int(struct isp1760_hcd *priv, struct isp1760_qh *qh,
+                        struct isp1760_qtd *qtd, struct urb *urb,
+                        u32 payload, struct ptd *ptd)
+{
+        u32 maxpacket;
+        u32 multi;
+        u32 numberofusofs;
+        u32 i;
+        u32 usofmask, usof;
+        u32 period;
+
+        maxpacket = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe));
+        multi =  1 + ((maxpacket >> 11) & 0x3);
+        maxpacket &= 0x7ff;
+        /* length of the data per uframe */
+        maxpacket = multi * maxpacket;
+
+        numberofusofs = urb->transfer_buffer_length / maxpacket;
+        if (urb->transfer_buffer_length % maxpacket)
+                numberofusofs += 1;
+
+        usofmask = 1;
+        usof = 0;
+        for (i = 0; i < numberofusofs; i++) {
+                usof |= usofmask;
+                usofmask <<= 1;
+        }
+
+        if (urb->dev->speed != USB_SPEED_HIGH) {
+                /* split */
+                ptd->dw5 = __constant_cpu_to_le32(0x1c);
+
+                if (qh->period >= 32)
+                        period = qh->period / 2;
+                else
+                        period = qh->period;
+
+        } else {
+
+                if (qh->period >= 8)
+                        period = qh->period/8;
+                else
+                        period = qh->period;
+
+                if (period >= 32)
+                        period  = 16;
+
+                if (qh->period >= 8) {
+                        /* millisecond period */
+                        period = (period << 3);
+                } else {
+                        /* usof based tranmsfers */
+                        /* minimum 4 usofs */
+                        usof = 0x11;
+                }
+        }
+
+        ptd->dw2 |= cpu_to_le32(period);
+        ptd->dw4 = cpu_to_le32(usof);
+}
+
+static void transform_into_int(struct isp1760_hcd *priv, struct isp1760_qh *qh,
+                        struct isp1760_qtd *qtd, struct urb *urb,
+                        u32 payload, struct ptd *ptd)
+{
+        transform_into_atl(priv, qh, qtd, urb, payload, ptd);
+        transform_add_int(priv, qh, qtd, urb,  payload, ptd);
+}
+
+static int qtd_fill(struct isp1760_qtd *qtd, void *databuffer, size_t len,
+                u32 token)
+{
+        int count;
+
+        qtd->data_buffer = databuffer;
+        qtd->packet_type = GET_QTD_TOKEN_TYPE(token);
+        qtd->toggle = GET_DATA_TOGGLE(token);
+
+        if (len > HC_ATL_PL_SIZE)
+                count = HC_ATL_PL_SIZE;
+        else
+                count = len;
+
+        qtd->length = count;
+        return count;
+}
+
+static int check_error(struct ptd *ptd)
+{
+        int error = 0;
+        u32 dw3;
+
+        dw3 = le32_to_cpu(ptd->dw3);
+        if (dw3 & DW3_HALT_BIT)
+                error = -EPIPE;
+
+        if (dw3 & DW3_ERROR_BIT) {
+                printk(KERN_ERR "error bit is set in DW3\n");
+                error = -EPIPE;
+        }
+
+        if (dw3 & DW3_QTD_ACTIVE) {
+                printk(KERN_ERR "transfer active bit is set DW3\n");
+                printk(KERN_ERR "nak counter: %d, rl: %d\n", (dw3 >> 19) & 0xf,
+                                (le32_to_cpu(ptd->dw2) >> 25) & 0xf);
+        }
+
+        return error;
+}
+
+static void check_int_err_status(u32 dw4)
+{
+        u32 i;
+
+        dw4 >>= 8;
+
+        for (i = 0; i < 8; i++) {
+                switch (dw4 & 0x7) {
+                case INT_UNDERRUN:
+                        printk(KERN_ERR "ERROR: under run , %d\n", i);
+                        break;
+
+                case INT_EXACT:
+                        printk(KERN_ERR "ERROR: transaction error, %d\n", i);
+                        break;
+
+                case INT_BABBLE:
+                        printk(KERN_ERR "ERROR: babble error, %d\n", i);
+                        break;
+                }
+                dw4 >>= 3;
+        }
+}
+
+static void enqueue_one_qtd(struct isp1760_qtd *qtd, struct isp1760_hcd *priv,
+                u32 payload)
+{
+        u32 token;
+        struct usb_hcd *hcd = priv_to_hcd(priv);
+
+        token = qtd->packet_type;
+
+        if (qtd->length && (qtd->length <= HC_ATL_PL_SIZE)) {
+                switch (token) {
+                case IN_PID:
+                        break;
+                case OUT_PID:
+                case SETUP_PID:
+                        priv_write_copy(priv, qtd->data_buffer,
+                                        hcd->regs + payload,
+                                        qtd->length);
+                }
+        }
+}
+
+static void enqueue_one_atl_qtd(u32 atl_regs, u32 payload,
+                struct isp1760_hcd *priv, struct isp1760_qh *qh,
+                struct urb *urb, u32 slot, struct isp1760_qtd *qtd)
+{
+        struct ptd ptd;
+        struct usb_hcd *hcd = priv_to_hcd(priv);
+
+        transform_into_atl(priv, qh, qtd, urb, payload, &ptd);
+        priv_write_copy(priv, (u32 *)&ptd, hcd->regs + atl_regs, sizeof(ptd));
+        enqueue_one_qtd(qtd, priv, payload);
+
+        priv->atl_ints[slot].urb = urb;
+        priv->atl_ints[slot].qh = qh;
+        priv->atl_ints[slot].qtd = qtd;
+        priv->atl_ints[slot].data_buffer = qtd->data_buffer;
+        priv->atl_ints[slot].payload = payload;
+        qtd->status |= URB_ENQUEUED | URB_TYPE_ATL;
+        qtd->status |= slot << 16;
+}
+
+static void enqueue_one_int_qtd(u32 int_regs, u32 payload,
+                struct isp1760_hcd *priv, struct isp1760_qh *qh,
+                struct urb *urb, u32 slot,  struct isp1760_qtd *qtd)
+{
+        struct ptd ptd;
+        struct usb_hcd *hcd = priv_to_hcd(priv);
+
+        transform_into_int(priv, qh, qtd, urb, payload, &ptd);
+        priv_write_copy(priv, (u32 *)&ptd, hcd->regs + int_regs, sizeof(ptd));
+        enqueue_one_qtd(qtd, priv, payload);
+
+        priv->int_ints[slot].urb = urb;
+        priv->int_ints[slot].qh = qh;
+        priv->int_ints[slot].qtd = qtd;
+        priv->int_ints[slot].data_buffer = qtd->data_buffer;
+        priv->int_ints[slot].payload = payload;
+        qtd->status |= URB_ENQUEUED | URB_TYPE_INT;
+        qtd->status |= slot << 16;
+}
+
+void enqueue_an_ATL_packet(struct usb_hcd *hcd, struct isp1760_qh *qh,
+                struct isp1760_qtd *qtd)
+{
+        struct isp1760_hcd *priv = hcd_to_priv(hcd);
+        u32 skip_map, or_map;
+        u32 queue_entry;
+        u32 slot;
+        u32 atl_regs, payload;
+        u32 buffstatus;
+
+        skip_map = isp1760_readl(hcd->regs + HC_ATL_PTD_SKIPMAP_REG);
+
+        BUG_ON(!skip_map);
+        slot = __ffs(skip_map);
+        queue_entry = 1 << slot;
+
+        atl_regs = ATL_REGS_OFFSET + slot * sizeof(struct ptd);
+
+        payload = alloc_mem(priv, qtd->length);
+
+        enqueue_one_atl_qtd(atl_regs, payload, priv, qh, qtd->urb, slot, qtd);
+
+        or_map = isp1760_readl(hcd->regs + HC_ATL_IRQ_MASK_OR_REG);
+        or_map |= queue_entry;
+        isp1760_writel(or_map, hcd->regs + HC_ATL_IRQ_MASK_OR_REG);
+
+        skip_map &= ~queue_entry;
+        isp1760_writel(skip_map, hcd->regs + HC_ATL_PTD_SKIPMAP_REG);
+
+        buffstatus = isp1760_readl(hcd->regs + HC_BUFFER_STATUS_REG);
+        buffstatus |= ATL_BUFFER;
+        isp1760_writel(buffstatus, hcd->regs + HC_BUFFER_STATUS_REG);
+}
+
+void enqueue_an_INT_packet(struct usb_hcd *hcd, struct isp1760_qh *qh,
+                struct isp1760_qtd *qtd)
+{
+        struct isp1760_hcd *priv = hcd_to_priv(hcd);
+        u32 skip_map, or_map;
+        u32 queue_entry;
+        u32 slot;
+        u32 int_regs, payload;
+        u32 buffstatus;
+
+        skip_map = isp1760_readl(hcd->regs + HC_INT_PTD_SKIPMAP_REG);
+
+        BUG_ON(!skip_map);
+        slot = __ffs(skip_map);
+        queue_entry = 1 << slot;
+
+        int_regs = INT_REGS_OFFSET + slot * sizeof(struct ptd);
+
+        payload = alloc_mem(priv, qtd->length);
+
+        enqueue_one_int_qtd(int_regs, payload, priv, qh, qtd->urb, slot, qtd);
+
+        or_map = isp1760_readl(hcd->regs + HC_INT_IRQ_MASK_OR_REG);
+        or_map |= queue_entry;
+        isp1760_writel(or_map, hcd->regs + HC_INT_IRQ_MASK_OR_REG);
+
+        skip_map &= ~queue_entry;
+        isp1760_writel(skip_map, hcd->regs + HC_INT_PTD_SKIPMAP_REG);
+
+        buffstatus = isp1760_readl(hcd->regs + HC_BUFFER_STATUS_REG);
+        buffstatus |= INT_BUFFER;
+        isp1760_writel(buffstatus, hcd->regs + HC_BUFFER_STATUS_REG);
+}
+
+static void isp1760_urb_done(struct isp1760_hcd *priv, struct urb *urb, int status)
+__releases(priv->lock)
+__acquires(priv->lock)
+{
+        if (!urb->unlinked) {
+                if (status == -EINPROGRESS)
+                        status = 0;
+        }
+
+        /* complete() can reenter this HCD */
+        usb_hcd_unlink_urb_from_ep(priv_to_hcd(priv), urb);
+        spin_unlock(&priv->lock);
+        usb_hcd_giveback_urb(priv_to_hcd(priv), urb, status);
+        spin_lock(&priv->lock);
+}
+
+static void isp1760_qtd_free(struct isp1760_qtd *qtd)
+{
+        kmem_cache_free(qtd_cachep, qtd);
+}
+
+static struct isp1760_qtd *clean_this_qtd(struct isp1760_qtd *qtd)
+{
+        struct isp1760_qtd *tmp_qtd;
+
+        tmp_qtd = qtd->hw_next;
+        list_del(&qtd->qtd_list);
+        isp1760_qtd_free(qtd);
+        return tmp_qtd;
+}
+
+/*
+ * Remove this QTD from the QH list and free its memory. If this QTD
+ * isn't the last one than remove also his successor(s).
+ * Returns the QTD which is part of an new URB and should be enqueued.
+ */
+static struct isp1760_qtd *clean_up_qtdlist(struct isp1760_qtd *qtd)
+{
+        struct isp1760_qtd *tmp_qtd;
+        int last_one;
+
+        do {
+                tmp_qtd = qtd->hw_next;
+                last_one = qtd->status & URB_COMPLETE_NOTIFY;
+                list_del(&qtd->qtd_list);
+                isp1760_qtd_free(qtd);
+                qtd = tmp_qtd;
+        } while (!last_one && qtd);
+
+        return qtd;
+}
+
+static void do_atl_int(struct usb_hcd *usb_hcd)
+{
+        struct isp1760_hcd *priv = hcd_to_priv(usb_hcd);
+        u32 done_map, skip_map;
+        struct ptd ptd;
+        struct urb *urb = NULL;
+        u32 atl_regs_base;
+        u32 atl_regs;
+        u32 queue_entry;
+        u32 payload;
+        u32 length;
+        u32 or_map;
+        u32 status = -EINVAL;
+        int error;
+        struct isp1760_qtd *qtd;
+        struct isp1760_qh *qh;
+        u32 rl;
+        u32 nakcount;
+
+        done_map = isp1760_readl(usb_hcd->regs +
+                        HC_ATL_PTD_DONEMAP_REG);
+        skip_map = isp1760_readl(usb_hcd->regs +
+                        HC_ATL_PTD_SKIPMAP_REG);
+
+        or_map = isp1760_readl(usb_hcd->regs + HC_ATL_IRQ_MASK_OR_REG);
+        or_map &= ~done_map;
+        isp1760_writel(or_map, usb_hcd->regs + HC_ATL_IRQ_MASK_OR_REG);
+
+        atl_regs_base = ATL_REGS_OFFSET;
+        while (done_map) {
+                u32 dw1;
+                u32 dw2;
+                u32 dw3;
+
+                status = 0;
+
+                queue_entry = __ffs(done_map);
+                done_map &= ~(1 << queue_entry);
+                skip_map |= 1 << queue_entry;
+
+                atl_regs = atl_regs_base + queue_entry * sizeof(struct ptd);
+
+                urb = priv->atl_ints[queue_entry].urb;
+                qtd = priv->atl_ints[queue_entry].qtd;
+                qh = priv->atl_ints[queue_entry].qh;
+                payload = priv->atl_ints[queue_entry].payload;
+
+                if (!qh) {
+                        printk(KERN_ERR "qh is 0\n");
+                        continue;
+                }
+                priv_read_copy(priv, (u32 *)&ptd, usb_hcd->regs + atl_regs,
+                                atl_regs, sizeof(ptd));
+
+                dw1 = le32_to_cpu(ptd.dw1);
+                dw2 = le32_to_cpu(ptd.dw2);
+                dw3 = le32_to_cpu(ptd.dw3);
+                rl = (dw2 >> 25) & 0x0f;
+                nakcount = (dw3 >> 19) & 0xf;
+
+                /* Transfer Error, *but* active and no HALT -> reload */
+                if ((dw3 & DW3_ERROR_BIT) && (dw3 & DW3_QTD_ACTIVE) &&
+                                !(dw3 & DW3_HALT_BIT)) {
+
+                        /* according to ppriv code, we have to
+                         * reload this one if trasfered bytes != requested bytes
+                         * else act like everything went smooth..
+                         * XXX This just doesn't feel right and hasn't
+                         * triggered so far.
+                         */
+
+                        length = PTD_XFERRED_LENGTH(dw3);
+                        printk(KERN_ERR "Should reload now.... transfered %d "
+                                        "of %zu\n", length, qtd->length);
+                        BUG();
+                }
+
+                if (!nakcount && (dw3 & DW3_QTD_ACTIVE)) {
+                        u32 buffstatus;
+
+                        /* XXX
+                         * NAKs are handled in HW by the chip. Usually if the
+                         * device is not able to send data fast enough.
+                         * This did not trigger for a long time now.
+                         */
+                        printk(KERN_ERR "Reloading ptd %p/%p... qh %p readed: "
+                                        "%d of %d done: %08x cur: %08x\n", qtd,
+                                        urb, qh, PTD_XFERRED_LENGTH(dw3),
+                                        qtd->length, done_map,
+                                        (1 << queue_entry));
+
+                        /* RL counter = ERR counter */
+                        dw3 &= ~(0xf << 19);
+                        dw3 |= rl << 19;
+                        dw3 &= ~(3 << (55 - 32));
+                        dw3 |= ERR_COUNTER << (55 - 32);
+
+                        /*
+                         * It is not needed to write skip map back because it
+                         * is unchanged. Just make sure that this entry is
+                         * unskipped once it gets written to the HW.
+                         */
+                        skip_map &= ~(1 << queue_entry);
+                        or_map = isp1760_readl(usb_hcd->regs +
+                                        HC_ATL_IRQ_MASK_OR_REG);
+                        or_map |= 1 << queue_entry;
+                        isp1760_writel(or_map, usb_hcd->regs +
+                                        HC_ATL_IRQ_MASK_OR_REG);
+
+                        ptd.dw3 = cpu_to_le32(dw3);
+                        priv_write_copy(priv, (u32 *)&ptd, usb_hcd->regs +
+                                        atl_regs, sizeof(ptd));
+
+                        ptd.dw0 |= __constant_cpu_to_le32(PTD_VALID);
+                        priv_write_copy(priv, (u32 *)&ptd, usb_hcd->regs +
+                                        atl_regs, sizeof(ptd));
+
+                        buffstatus = isp1760_readl(usb_hcd->regs +
+                                        HC_BUFFER_STATUS_REG);
+                        buffstatus |= ATL_BUFFER;
+                        isp1760_writel(buffstatus, usb_hcd->regs +
+                                        HC_BUFFER_STATUS_REG);
+                        continue;
+                }
+
+                error = check_error(&ptd);
+                if (error) {
+                        status = error;
+                        priv->atl_ints[queue_entry].qh->toggle = 0;
+                        priv->atl_ints[queue_entry].qh->ping = 0;
+                        urb->status = -EPIPE;
+
+#if 0
+                        printk(KERN_ERR "Error in %s().\n", __func__);
+                        printk(KERN_ERR "IN dw0: %08x dw1: %08x dw2: %08x "
+                                        "dw3: %08x dw4: %08x dw5: %08x dw6: "
+                                        "%08x dw7: %08x\n",
+                                        ptd.dw0, ptd.dw1, ptd.dw2, ptd.dw3,
+                                        ptd.dw4, ptd.dw5, ptd.dw6, ptd.dw7);
+#endif
+                } else {
+                        if (usb_pipetype(urb->pipe) == PIPE_BULK) {
+                                priv->atl_ints[queue_entry].qh->toggle = dw3 &
+                                        (1 << 25);
+                                priv->atl_ints[queue_entry].qh->ping = dw3 &
+                                        (1 << 26);
+                        }
+                }
+
+                length = PTD_XFERRED_LENGTH(dw3);
+                if (length) {
+                        switch (DW1_GET_PID(dw1)) {
+                        case IN_PID:
+                                priv_read_copy(priv,
+                                        priv->atl_ints[queue_entry].data_buffer,
+                                        usb_hcd->regs + payload, payload,
+                                        length);
+
+                        case OUT_PID:
+
+                                urb->actual_length += length;
+
+                        case SETUP_PID:
+                                break;
+                        }
+                }
+
+                priv->atl_ints[queue_entry].data_buffer = NULL;
+                priv->atl_ints[queue_entry].urb = NULL;
+                priv->atl_ints[queue_entry].qtd = NULL;
+                priv->atl_ints[queue_entry].qh = NULL;
+
+                free_mem(priv, payload);
+
+                isp1760_writel(skip_map, usb_hcd->regs +
+                                HC_ATL_PTD_SKIPMAP_REG);
+
+                if (urb->status == -EPIPE) {
+                        /* HALT was received */
+
+                        qtd = clean_up_qtdlist(qtd);
+                        isp1760_urb_done(priv, urb, urb->status);
+
+                } else if (usb_pipebulk(urb->pipe) && (length < qtd->length)) {
+                        /* short BULK received */
+
+                        printk(KERN_ERR "short bulk, %d instead %d\n", length,
+                                        qtd->length);
+                        if (urb->transfer_flags & URB_SHORT_NOT_OK) {
+                                urb->status = -EREMOTEIO;
+                                printk(KERN_ERR "not okey\n");
+                        }
+
+                        if (urb->status == -EINPROGRESS)
+                                urb->status = 0;
+
+                        qtd = clean_up_qtdlist(qtd);
+
+                        isp1760_urb_done(priv, urb, urb->status);
+
+                } else if (qtd->status & URB_COMPLETE_NOTIFY) {
+                        /* that was the last qtd of that URB */
+
+                        if (urb->status == -EINPROGRESS)
+                                urb->status = 0;
+
+                        qtd = clean_this_qtd(qtd);
+                        isp1760_urb_done(priv, urb, urb->status);
+
+                } else {
+                        /* next QTD of this URB */
+
+                        qtd = clean_this_qtd(qtd);
+                        BUG_ON(!qtd);
+                }
+
+                if (qtd)
+                        enqueue_an_ATL_packet(usb_hcd, qh, qtd);
+
+                skip_map = isp1760_readl(usb_hcd->regs +
+                                HC_ATL_PTD_SKIPMAP_REG);
+        }
+}
+
+static void do_intl_int(struct usb_hcd *usb_hcd)
+{
+        struct isp1760_hcd *priv = hcd_to_priv(usb_hcd);
+        u32 done_map, skip_map;
+        struct ptd ptd;
+        struct urb *urb = NULL;
+        u32 int_regs;
+        u32 int_regs_base;
+        u32 payload;
+        u32 length;
+        u32 or_map;
+        int error;
+        u32 queue_entry;
+        struct isp1760_qtd *qtd;
+        struct isp1760_qh *qh;
+
+        done_map = isp1760_readl(usb_hcd->regs +
+                        HC_INT_PTD_DONEMAP_REG);
+        skip_map = isp1760_readl(usb_hcd->regs +
+                        HC_INT_PTD_SKIPMAP_REG);
+
+        or_map = isp1760_readl(usb_hcd->regs + HC_INT_IRQ_MASK_OR_REG);
+        or_map &= ~done_map;
+        isp1760_writel(or_map, usb_hcd->regs + HC_INT_IRQ_MASK_OR_REG);
+
+        int_regs_base = INT_REGS_OFFSET;
+
+        while (done_map) {
+                u32 dw1;
+                u32 dw3;
+
+                queue_entry = __ffs(done_map);
+                done_map &= ~(1 << queue_entry);
+                skip_map |= 1 << queue_entry;
+
+                int_regs = int_regs_base + queue_entry * sizeof(struct ptd);
+                urb = priv->int_ints[queue_entry].urb;
+                qtd = priv->int_ints[queue_entry].qtd;
+                qh = priv->int_ints[queue_entry].qh;
+                payload = priv->int_ints[queue_entry].payload;
+
+                if (!qh) {
+                        printk(KERN_ERR "(INT) qh is 0\n");
+                        continue;
+                }
+
+                priv_read_copy(priv, (u32 *)&ptd, usb_hcd->regs + int_regs,
+                                int_regs, sizeof(ptd));
+                dw1 = le32_to_cpu(ptd.dw1);
+                dw3 = le32_to_cpu(ptd.dw3);
+                check_int_err_status(le32_to_cpu(ptd.dw4));
+
+                error = check_error(&ptd);
+                if (error) {
+#if 0
+                        printk(KERN_ERR "Error in %s().\n", __func__);
+                        printk(KERN_ERR "IN dw0: %08x dw1: %08x dw2: %08x "
+                                        "dw3: %08x dw4: %08x dw5: %08x dw6: "
+                                        "%08x dw7: %08x\n",
+                                        ptd.dw0, ptd.dw1, ptd.dw2, ptd.dw3,
+                                        ptd.dw4, ptd.dw5, ptd.dw6, ptd.dw7);
+#endif
+                        urb->status = -EPIPE;
+                        priv->int_ints[queue_entry].qh->toggle = 0;
+                        priv->int_ints[queue_entry].qh->ping = 0;
+
+                } else {
+                        priv->int_ints[queue_entry].qh->toggle =
+                                dw3 & (1 << 25);
+                        priv->int_ints[queue_entry].qh->ping = dw3 & (1 << 26);
+                }
+
+                if (urb->dev->speed != USB_SPEED_HIGH)
+                        length = PTD_XFERRED_LENGTH_LO(dw3);
+                else
+                        length = PTD_XFERRED_LENGTH(dw3);
+
+                if (length) {
+                        switch (DW1_GET_PID(dw1)) {
+                        case IN_PID:
+                                priv_read_copy(priv,
+                                        priv->int_ints[queue_entry].data_buffer,
+                                        usb_hcd->regs + payload , payload,
+                                        length);
+                        case OUT_PID:
+
+                                urb->actual_length += length;
+
+                        case SETUP_PID:
+                                break;
+                        }
+                }
+
+                priv->int_ints[queue_entry].data_buffer = NULL;
+                priv->int_ints[queue_entry].urb = NULL;
+                priv->int_ints[queue_entry].qtd = NULL;
+                priv->int_ints[queue_entry].qh = NULL;
+
+                isp1760_writel(skip_map, usb_hcd->regs +
+                                HC_INT_PTD_SKIPMAP_REG);
+                free_mem(priv, payload);
+
+                if (urb->status == -EPIPE) {
+                        /* HALT received */
+
+                         qtd = clean_up_qtdlist(qtd);
+                         isp1760_urb_done(priv, urb, urb->status);
+
+                } else if (qtd->status & URB_COMPLETE_NOTIFY) {
+
+                        if (urb->status == -EINPROGRESS)
+                                urb->status = 0;
+
+                        qtd = clean_this_qtd(qtd);
+                        isp1760_urb_done(priv, urb, urb->status);
+
+                } else {
+                        /* next QTD of this URB */
+
+                        qtd = clean_this_qtd(qtd);
+                        BUG_ON(!qtd);
+                }
+
+                if (qtd)
+                        enqueue_an_INT_packet(usb_hcd, qh, qtd);
+
+                skip_map = isp1760_readl(usb_hcd->regs +
+                                HC_INT_PTD_SKIPMAP_REG);
+        }
+}
+
+#define max_packet(wMaxPacketSize) ((wMaxPacketSize) & 0x07ff)
+static struct isp1760_qh *qh_make(struct isp1760_hcd *priv, struct urb *urb,
+                gfp_t flags)
+{
+        struct isp1760_qh *qh;
+        int is_input, type;
+
+        qh = isp1760_qh_alloc(priv, flags);
+        if (!qh)
+                return qh;
+
+        /*
+         * init endpoint/device data for this QH
+         */
+        is_input = usb_pipein(urb->pipe);
+        type = usb_pipetype(urb->pipe);
+
+        if (type == PIPE_INTERRUPT) {
+
+                if (urb->dev->speed == USB_SPEED_HIGH) {
+
+                        qh->period = urb->interval >> 3;
+                        if (qh->period == 0 && urb->interval != 1) {
+                                /* NOTE interval 2 or 4 uframes could work.
+                                 * But interval 1 scheduling is simpler, and
+                                 * includes high bandwidth.
+                                 */
+                                printk(KERN_ERR "intr period %d uframes, NYET!",
+                                                urb->interval);
+                                qh_destroy(qh);
+                                return NULL;
+                        }
+                } else {
+                        qh->period = urb->interval;
+                }
+        }
+
+        /* support for tt scheduling, and access to toggles */
+        qh->dev = urb->dev;
+
+        if (!usb_pipecontrol(urb->pipe))
+                usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), !is_input,
+                                1);
+        return qh;
+}
+
+/*
+ * For control/bulk/interrupt, return QH with these TDs appended.
+ * Allocates and initializes the QH if necessary.
+ * Returns null if it can't allocate a QH it needs to.
+ * If the QH has TDs (urbs) already, that's great.
+ */
+static struct isp1760_qh *qh_append_tds(struct isp1760_hcd *priv,
+                struct urb *urb, struct list_head *qtd_list, int epnum,
+                void **ptr)
+{
+        struct isp1760_qh *qh;
+        struct isp1760_qtd *qtd;
+        struct isp1760_qtd *prev_qtd;
+
+        qh = (struct isp1760_qh *)*ptr;
+        if (!qh) {
+                /* can't sleep here, we have priv->lock... */
+                qh = qh_make(priv, urb, GFP_ATOMIC);
+                if (!qh)
+                        return qh;
+                *ptr = qh;
+        }
+
+        qtd = list_entry(qtd_list->next, struct isp1760_qtd,
+                        qtd_list);
+        if (!list_empty(&qh->qtd_list))
+                prev_qtd = list_entry(qh->qtd_list.prev,
+                                struct isp1760_qtd, qtd_list);
+        else
+                prev_qtd = NULL;
+
+        list_splice(qtd_list, qh->qtd_list.prev);
+        if (prev_qtd) {
+                BUG_ON(prev_qtd->hw_next);
+                prev_qtd->hw_next = qtd;
+        }
+
+        urb->hcpriv = qh;
+        return qh;
+}
+
+static void qtd_list_free(struct isp1760_hcd *priv, struct urb *urb,
+                struct list_head *qtd_list)
+{
+        struct list_head *entry, *temp;
+
+        list_for_each_safe(entry, temp, qtd_list) {
+                struct isp1760_qtd      *qtd;
+
+                qtd = list_entry(entry, struct isp1760_qtd, qtd_list);
+                list_del(&qtd->qtd_list);
+                isp1760_qtd_free(qtd);
+        }
+}
+
+static int isp1760_prepare_enqueue(struct isp1760_hcd *priv, struct urb *urb,
+                struct list_head *qtd_list, gfp_t mem_flags, packet_enqueue *p)
+{
+        struct isp1760_qtd         *qtd;
+        int                     epnum;
+        unsigned long           flags;
+        struct isp1760_qh          *qh = NULL;
+        int                     rc;
+        int qh_busy;
+
+        qtd = list_entry(qtd_list->next, struct isp1760_qtd, qtd_list);
+        epnum = urb->ep->desc.bEndpointAddress;
+
+        spin_lock_irqsave(&priv->lock, flags);
+        if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &priv_to_hcd(priv)->flags)) {
+                rc = -ESHUTDOWN;
+                goto done;
+        }
+        rc = usb_hcd_link_urb_to_ep(priv_to_hcd(priv), urb);
+        if (rc)
+                goto done;
+
+        qh = urb->ep->hcpriv;
+        if (qh)
+                qh_busy = !list_empty(&qh->qtd_list);
+        else
+                qh_busy = 0;
+
+        qh = qh_append_tds(priv, urb, qtd_list, epnum, &urb->ep->hcpriv);
+        if (!qh) {
+                usb_hcd_unlink_urb_from_ep(priv_to_hcd(priv), urb);
+                rc = -ENOMEM;
+                goto done;
+        }
+
+        if (!qh_busy)
+                p(priv_to_hcd(priv), qh, qtd);
+
+done:
+        spin_unlock_irqrestore(&priv->lock, flags);
+        if (!qh)
+                qtd_list_free(priv, urb, qtd_list);
+        return rc;
+}
+
+static struct isp1760_qtd *isp1760_qtd_alloc(struct isp1760_hcd *priv,
+                gfp_t flags)
+{
+        struct isp1760_qtd *qtd;
+
+        qtd = kmem_cache_zalloc(qtd_cachep, flags);
+        if (qtd)
+                INIT_LIST_HEAD(&qtd->qtd_list);
+
+        return qtd;
+}
+
+/*
+ * create a list of filled qtds for this URB; won't link into qh.
+ */
+static struct list_head *qh_urb_transaction(struct isp1760_hcd *priv,
+                struct urb *urb, struct list_head *head, gfp_t flags)
+{
+        struct isp1760_qtd *qtd, *qtd_prev;
+        void *buf;
+        int len, maxpacket;
+        int is_input;
+        u32 token;
+
+        /*
+         * URBs map to sequences of QTDs:  one logical transaction
+         */
+        qtd = isp1760_qtd_alloc(priv, flags);
+        if (!qtd)
+                return NULL;
+
+        list_add_tail(&qtd->qtd_list, head);
+        qtd->urb = urb;
+        urb->status = -EINPROGRESS;
+
+        token = 0;
+        /* for split transactions, SplitXState initialized to zero */
+
+        len = urb->transfer_buffer_length;
+        is_input = usb_pipein(urb->pipe);
+        if (usb_pipecontrol(urb->pipe)) {
+                /* SETUP pid */
+                qtd_fill(qtd, urb->setup_packet,
+                                sizeof(struct usb_ctrlrequest),
+                                token | SETUP_PID);
+
+                /* ... and always at least one more pid */
+                token ^= DATA_TOGGLE;
+                qtd_prev = qtd;
+                qtd = isp1760_qtd_alloc(priv, flags);
+                if (!qtd)
+                        goto cleanup;
+                qtd->urb = urb;
+                qtd_prev->hw_next = qtd;
+                list_add_tail(&qtd->qtd_list, head);
+
+                /* for zero length DATA stages, STATUS is always IN */
+                if (len == 0)
+                        token |= IN_PID;
+        }
+
+        /*
+         * data transfer stage:  buffer setup
+         */
+        buf = urb->transfer_buffer;
+
+        if (is_input)
+                token |= IN_PID;
+        else
+                token |= OUT_PID;
+
+        maxpacket = max_packet(usb_maxpacket(urb->dev, urb->pipe, !is_input));
+
+        /*
+         * buffer gets wrapped in one or more qtds;
+         * last one may be "short" (including zero len)
+         * and may serve as a control status ack
+         */
+        for (;;) {
+                int this_qtd_len;
+
+                if (!buf && len) {
+                        /* XXX This looks like usb storage / SCSI bug */
+                        printk(KERN_ERR "buf is null, dma is %08lx len is %d\n",
+                                        (long unsigned)urb->transfer_dma, len);
+                        WARN_ON(1);
+                }
+
+                this_qtd_len = qtd_fill(qtd, buf, len, token);
+                len -= this_qtd_len;
+                buf += this_qtd_len;
+
+                /* qh makes control packets use qtd toggle; maybe switch it */
+                if ((maxpacket & (this_qtd_len + (maxpacket - 1))) == 0)
+                        token ^= DATA_TOGGLE;
+
+                if (len <= 0)
+                        break;
+
+                qtd_prev = qtd;
+                qtd = isp1760_qtd_alloc(priv, flags);
+                if (!qtd)
+                        goto cleanup;
+                qtd->urb = urb;
+                qtd_prev->hw_next = qtd;
+                list_add_tail(&qtd->qtd_list, head);
+        }
+
+        /*
+         * control requests may need a terminating data "status" ack;
+         * bulk ones may need a terminating short packet (zero length).
+         */
+        if (urb->transfer_buffer_length != 0) {
+                int one_more = 0;
+
+                if (usb_pipecontrol(urb->pipe)) {
+                        one_more = 1;
+                        /* "in" <--> "out"  */
+                        token ^= IN_PID;
+                        /* force DATA1 */
+                        token |= DATA_TOGGLE;
+                } else if (usb_pipebulk(urb->pipe)
+                                && (urb->transfer_flags & URB_ZERO_PACKET)
+                                && !(urb->transfer_buffer_length % maxpacket)) {
+                        one_more = 1;
+                }
+                if (one_more) {
+                        qtd_prev = qtd;
+                        qtd = isp1760_qtd_alloc(priv, flags);
+                        if (!qtd)
+                                goto cleanup;
+                        qtd->urb = urb;
+                        qtd_prev->hw_next = qtd;
+                        list_add_tail(&qtd->qtd_list, head);
+
+                        /* never any data in such packets */
+                        qtd_fill(qtd, NULL, 0, token);
+                }
+        }
+
+        qtd->status = URB_COMPLETE_NOTIFY;
+        return head;
+
+cleanup:
+        qtd_list_free(priv, urb, head);
+        return NULL;
+}
+
+static int isp1760_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
+                gfp_t mem_flags)
+{
+        struct isp1760_hcd *priv = hcd_to_priv(hcd);
+        struct list_head qtd_list;
+        packet_enqueue *pe;
+
+        INIT_LIST_HEAD(&qtd_list);
+
+        switch (usb_pipetype(urb->pipe)) {
+        case PIPE_CONTROL:
+        case PIPE_BULK:
+
+                if (!qh_urb_transaction(priv, urb, &qtd_list, mem_flags))
+                        return -ENOMEM;
+                pe =  enqueue_an_ATL_packet;
+                break;
+
+        case PIPE_INTERRUPT:
+                if (!qh_urb_transaction(priv, urb, &qtd_list, mem_flags))
+                        return -ENOMEM;
+                pe = enqueue_an_INT_packet;
+                break;
+
+        case PIPE_ISOCHRONOUS:
+                printk(KERN_ERR "PIPE_ISOCHRONOUS ain't supported\n");
+        default:
+                return -EPIPE;
+        }
+
+        isp1760_prepare_enqueue(priv, urb, &qtd_list, mem_flags, pe);
+        return 0;
+}
+
+static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb,
+                int status)
+{
+        struct isp1760_hcd *priv = hcd_to_priv(hcd);
+        struct inter_packet_info *ints;
+        u32 i;
+        u32 reg_base, or_reg, skip_reg;
+        int flags;
+        struct ptd ptd;
+
+        switch (usb_pipetype(urb->pipe)) {
+        case PIPE_ISOCHRONOUS:
+                return -EPIPE;
+                break;
+
+        case PIPE_INTERRUPT:
+                ints = priv->int_ints;
+                reg_base = INT_REGS_OFFSET;
+                or_reg = HC_INT_IRQ_MASK_OR_REG;
+                skip_reg = HC_INT_PTD_SKIPMAP_REG;
+                break;
+
+        default:
+                ints = priv->atl_ints;
+                reg_base = ATL_REGS_OFFSET;
+                or_reg = HC_ATL_IRQ_MASK_OR_REG;
+                skip_reg = HC_ATL_PTD_SKIPMAP_REG;
+                break;
+        }
+
+        memset(&ptd, 0, sizeof(ptd));
+        spin_lock_irqsave(&priv->lock, flags);
+
+        for (i = 0; i < 32; i++) {
+                if (ints->urb == urb) {
+                        u32 skip_map;
+                        u32 or_map;
+                        struct isp1760_qtd *qtd;
+
+                        skip_map = isp1760_readl(hcd->regs + skip_reg);
+                        skip_map |= 1 << i;
+                        isp1760_writel(skip_map, hcd->regs + skip_reg);
+
+                        or_map = isp1760_readl(hcd->regs + or_reg);
+                        or_map &= ~(1 << i);
+                        isp1760_writel(or_map, hcd->regs + or_reg);
+
+                        priv_write_copy(priv, (u32 *)&ptd, hcd->regs + reg_base
+                                        + i * sizeof(ptd), sizeof(ptd));
+                        qtd = ints->qtd;
+
+                        clean_up_qtdlist(qtd);
+
+                        free_mem(priv, ints->payload);
+
+                        ints->urb = NULL;
+                        ints->qh = NULL;
+                        ints->qtd = NULL;
+                        ints->data_buffer = NULL;
+                        ints->payload = 0;
+
+                        isp1760_urb_done(priv, urb, status);
+                        break;
+                }
+                ints++;
+        }
+
+        spin_unlock_irqrestore(&priv->lock, flags);
+        return 0;
+}
+
+static irqreturn_t isp1760_irq(struct usb_hcd *usb_hcd)
+{
+        struct isp1760_hcd *priv = hcd_to_priv(usb_hcd);
+        u32 imask;
+        irqreturn_t irqret = IRQ_NONE;
+
+        spin_lock(&priv->lock);
+
+        if (!(usb_hcd->state & HC_STATE_RUNNING))
+                goto leave;
+
+        imask = isp1760_readl(usb_hcd->regs + HC_INTERRUPT_REG);
+        if (unlikely(!imask))
+                goto leave;
+
+        isp1760_writel(imask, usb_hcd->regs + HC_INTERRUPT_REG);
+        if (imask & HC_ATL_INT)
+                do_atl_int(usb_hcd);
+
+        if (imask & HC_INTL_INT)
+                do_intl_int(usb_hcd);
+
+        irqret = IRQ_HANDLED;
+leave:
+        spin_unlock(&priv->lock);
+        return irqret;
+}
+
+static int isp1760_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+        struct isp1760_hcd *priv = hcd_to_priv(hcd);
+        u32 temp, status = 0;
+        u32 mask;
+        int retval = 1;
+        unsigned long flags;
+
+        /* if !USB_SUSPEND, root hub timers won't get shut down ... */
+        if (!HC_IS_RUNNING(hcd->state))
+                return 0;
+
+        /* init status to no-changes */
+        buf[0] = 0;
+        mask = PORT_CSC;
+
+        spin_lock_irqsave(&priv->lock, flags);
+        temp = isp1760_readl(hcd->regs + HC_PORTSC1);
+
+        if (temp & PORT_OWNER) {
+                if (temp & PORT_CSC) {
+                        temp &= ~PORT_CSC;
+                        isp1760_writel(temp, hcd->regs + HC_PORTSC1);
+                        goto done;
+                }
+        }
+
+        /*
+         * Return status information even for ports with OWNER set.
+         * Otherwise khubd wouldn't see the disconnect event when a
+         * high-speed device is switched over to the companion
+         * controller by the user.
+         */
+
+        if ((temp & mask) != 0
+                        || ((temp & PORT_RESUME) != 0
+                                && time_after_eq(jiffies,
+                                        priv->reset_done))) {
+                buf [0] |= 1 << (0 + 1);
+                status = STS_PCD;
+        }
+        /* FIXME autosuspend idle root hubs */
+done:
+        spin_unlock_irqrestore(&priv->lock, flags);
+        return status ? retval : 0;
+}
+
+static void isp1760_hub_descriptor(struct isp1760_hcd *priv,
+                struct usb_hub_descriptor *desc)
+{
+        int ports = HCS_N_PORTS(priv->hcs_params);
+        u16 temp;
+
+        desc->bDescriptorType = 0x29;
+        /* priv 1.0, 2.3.9 says 20ms max */
+        desc->bPwrOn2PwrGood = 10;
+        desc->bHubContrCurrent = 0;
+
+        desc->bNbrPorts = ports;
+        temp = 1 + (ports / 8);
+        desc->bDescLength = 7 + 2 * temp;
+
+        /* two bitmaps:  ports removable, and usb 1.0 legacy PortPwrCtrlMask */
+        memset(&desc->bitmap[0], 0, temp);
+        memset(&desc->bitmap[temp], 0xff, temp);
+
+        /* per-port overcurrent reporting */
+        temp = 0x0008;
+        if (HCS_PPC(priv->hcs_params))
+                /* per-port power control */
+                temp |= 0x0001;
+        else
+                /* no power switching */
+                temp |= 0x0002;
+        desc->wHubCharacteristics = cpu_to_le16(temp);
+}
+
+#define PORT_WAKE_BITS  (PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E)
+
+static int check_reset_complete(struct isp1760_hcd *priv, int index,
+                u32 __iomem *status_reg, int port_status)
+{
+        if (!(port_status & PORT_CONNECT))
+                return port_status;
+
+        /* if reset finished and it's still not enabled -- handoff */
+        if (!(port_status & PORT_PE)) {
+
+                printk(KERN_ERR "port %d full speed --> companion\n",
+                        index + 1);
+
+                port_status |= PORT_OWNER;
+                port_status &= ~PORT_RWC_BITS;
+                isp1760_writel(port_status, status_reg);
+
+        } else
+                printk(KERN_ERR "port %d high speed\n", index + 1);
+
+        return port_status;
+}
+
+static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq,
+                u16 wValue, u16 wIndex, char *buf, u16 wLength)
+{
+        struct isp1760_hcd *priv = hcd_to_priv(hcd);
+        int ports = HCS_N_PORTS(priv->hcs_params);
+        u32 __iomem *status_reg = hcd->regs + HC_PORTSC1;
+        u32 temp, status;
+        unsigned long flags;
+        int retval = 0;
+        unsigned selector;
+
+        /*
+         * FIXME:  support SetPortFeatures USB_PORT_FEAT_INDICATOR.
+         * HCS_INDICATOR may say we can change LEDs to off/amber/green.
+         * (track current state ourselves) ... blink for diagnostics,
+         * power, "this is the one", etc.  EHCI spec supports this.
+         */
+
+        spin_lock_irqsave(&priv->lock, flags);
+        switch (typeReq) {
+        case ClearHubFeature:
+                switch (wValue) {
+                case C_HUB_LOCAL_POWER:
+                case C_HUB_OVER_CURRENT:
+                        /* no hub-wide feature/status flags */
+                        break;
+                default:
+                        goto error;
+                }
+                break;
+        case ClearPortFeature:
+                if (!wIndex || wIndex > ports)
+                        goto error;
+                wIndex--;
+                temp = isp1760_readl(status_reg);
+
+                /*
+                 * Even if OWNER is set, so the port is owned by the
+                 * companion controller, khubd needs to be able to clear
+                 * the port-change status bits (especially
+                 * USB_PORT_FEAT_C_CONNECTION).
+                 */
+
+                switch (wValue) {
+                case USB_PORT_FEAT_ENABLE:
+                        isp1760_writel(temp & ~PORT_PE, status_reg);
+                        break;
+                case USB_PORT_FEAT_C_ENABLE:
+                        /* XXX error? */
+                        break;
+                case USB_PORT_FEAT_SUSPEND:
+                        if (temp & PORT_RESET)
+                                goto error;
+
+                        if (temp & PORT_SUSPEND) {
+                                if ((temp & PORT_PE) == 0)
+                                        goto error;
+                                /* resume signaling for 20 msec */
+                                temp &= ~(PORT_RWC_BITS);
+                                isp1760_writel(temp | PORT_RESUME,
+                                                status_reg);
+                                priv->reset_done = jiffies +
+                                        msecs_to_jiffies(20);
+                        }
+                        break;
+                case USB_PORT_FEAT_C_SUSPEND:
+                        /* we auto-clear this feature */
+                        break;
+                case USB_PORT_FEAT_POWER:
+                        if (HCS_PPC(priv->hcs_params))
+                                isp1760_writel(temp & ~PORT_POWER, status_reg);
+                        break;
+                case USB_PORT_FEAT_C_CONNECTION:
+                        isp1760_writel(temp | PORT_CSC,
+                                        status_reg);
+                        break;
+                case USB_PORT_FEAT_C_OVER_CURRENT:
+                        /* XXX error ?*/
+                        break;
+                case USB_PORT_FEAT_C_RESET:
+                        /* GetPortStatus clears reset */
+                        break;
+                default:
+                        goto error;
+                }
+                isp1760_readl(hcd->regs + HC_USBCMD);
+                break;
+        case GetHubDescriptor:
+                isp1760_hub_descriptor(priv, (struct usb_hub_descriptor *)
+                        buf);
+                break;
+        case GetHubStatus:
+                /* no hub-wide feature/status flags */
+                memset(buf, 0, 4);
+                break;
+        case GetPortStatus:
+                if (!wIndex || wIndex > ports)
+                        goto error;
+                wIndex--;
+                status = 0;
+                temp = isp1760_readl(status_reg);
+
+                /* wPortChange bits */
+                if (temp & PORT_CSC)
+                        status |= 1 << USB_PORT_FEAT_C_CONNECTION;
+
+
+                /* whoever resumes must GetPortStatus to complete it!! */
+                if (temp & PORT_RESUME) {
+                        printk(KERN_ERR "Port resume should be skipped.\n");
+
+                        /* Remote Wakeup received? */
+                        if (!priv->reset_done) {
+                                /* resume signaling for 20 msec */
+                                priv->reset_done = jiffies
+                                                + msecs_to_jiffies(20);
+                                /* check the port again */
+                                mod_timer(&priv_to_hcd(priv)->rh_timer,
+                                                priv->reset_done);
+                        }
+
+                        /* resume completed? */
+                        else if (time_after_eq(jiffies,
+                                        priv->reset_done)) {
+                                status |= 1 << USB_PORT_FEAT_C_SUSPEND;
+                                priv->reset_done = 0;
+
+                                /* stop resume signaling */
+                                temp = isp1760_readl(status_reg);
+                                isp1760_writel(
+                                        temp & ~(PORT_RWC_BITS | PORT_RESUME),
+                                        status_reg);
+                                retval = handshake(priv, status_reg,
+                                           PORT_RESUME, 0, 2000 /* 2msec */);
+                                if (retval != 0) {
+                                        isp1760_err(priv,
+                                                "port %d resume error %d\n",
+                                                wIndex + 1, retval);
+                                        goto error;
+                                }
+                                temp &= ~(PORT_SUSPEND|PORT_RESUME|(3<<10));
+                        }
+                }
+
+                /* whoever resets must GetPortStatus to complete it!! */
+                if ((temp & PORT_RESET)
+                                && time_after_eq(jiffies,
+                                        priv->reset_done)) {
+                        status |= 1 << USB_PORT_FEAT_C_RESET;
+                        priv->reset_done = 0;
+
+                        /* force reset to complete */
+                        isp1760_writel(temp & ~PORT_RESET,
+                                        status_reg);
+                        /* REVISIT:  some hardware needs 550+ usec to clear
+                         * this bit; seems too long to spin routinely...
+                         */
+                        retval = handshake(priv, status_reg,
+                                        PORT_RESET, 0, 750);
+                        if (retval != 0) {
+                                isp1760_err(priv, "port %d reset error %d\n",
+                                                wIndex + 1, retval);
+                                goto error;
+                        }
+
+                        /* see what we found out */
+                        temp = check_reset_complete(priv, wIndex, status_reg,
+                                        isp1760_readl(status_reg));
+                }
+                /*
+                 * Even if OWNER is set, there's no harm letting khubd
+                 * see the wPortStatus values (they should all be 0 except
+                 * for PORT_POWER anyway).
+                 */
+
+                if (temp & PORT_OWNER)
+                        printk(KERN_ERR "Warning: PORT_OWNER is set\n");
+
+                if (temp & PORT_CONNECT) {
+                        status |= 1 << USB_PORT_FEAT_CONNECTION;
+                        /* status may be from integrated TT */
+                        status |= ehci_port_speed(priv, temp);
+                }
+                if (temp & PORT_PE)
+                        status |= 1 << USB_PORT_FEAT_ENABLE;
+                if (temp & (PORT_SUSPEND|PORT_RESUME))
+                        status |= 1 << USB_PORT_FEAT_SUSPEND;
+                if (temp & PORT_RESET)
+                        status |= 1 << USB_PORT_FEAT_RESET;
+                if (temp & PORT_POWER)
+                        status |= 1 << USB_PORT_FEAT_POWER;
+
+                put_unaligned(cpu_to_le32(status), (__le32 *) buf);
+                break;
+        case SetHubFeature:
+                switch (wValue) {
+                case C_HUB_LOCAL_POWER:
+                case C_HUB_OVER_CURRENT:
+                        /* no hub-wide feature/status flags */
+                        break;
+                default:
+                        goto error;
+                }
+                break;
+        case SetPortFeature:
+                selector = wIndex >> 8;
+                wIndex &= 0xff;
+                if (!wIndex || wIndex > ports)
+                        goto error;
+                wIndex--;
+                temp = isp1760_readl(status_reg);
+                if (temp & PORT_OWNER)
+                        break;
+
+/*              temp &= ~PORT_RWC_BITS; */
+                switch (wValue) {
+                case USB_PORT_FEAT_ENABLE:
+                        isp1760_writel(temp | PORT_PE, status_reg);
+                        break;
+
+                case USB_PORT_FEAT_SUSPEND:
+                        if ((temp & PORT_PE) == 0
+                                        || (temp & PORT_RESET) != 0)
+                                goto error;
+
+                        isp1760_writel(temp | PORT_SUSPEND, status_reg);
+                        break;
+                case USB_PORT_FEAT_POWER:
+                        if (HCS_PPC(priv->hcs_params))
+                                isp1760_writel(temp | PORT_POWER,
+                                                status_reg);
+                        break;
+                case USB_PORT_FEAT_RESET:
+                        if (temp & PORT_RESUME)
+                                goto error;
+                        /* line status bits may report this as low speed,
+                         * which can be fine if this root hub has a
+                         * transaction translator built in.
+                         */
+                        if ((temp & (PORT_PE|PORT_CONNECT)) == PORT_CONNECT
+                                        && PORT_USB11(temp)) {
+                                temp |= PORT_OWNER;
+                        } else {
+                                temp |= PORT_RESET;
+                                temp &= ~PORT_PE;
+
+                                /*
+                                 * caller must wait, then call GetPortStatus
+                                 * usb 2.0 spec says 50 ms resets on root
+                                 */
+                                priv->reset_done = jiffies +
+                                        msecs_to_jiffies(50);
+                        }
+                        isp1760_writel(temp, status_reg);
+                        break;
+                default:
+                        goto error;
+                }
+                isp1760_readl(hcd->regs + HC_USBCMD);
+                break;
+
+        default:
+error:
+                /* "stall" on error */
+                retval = -EPIPE;
+        }
+        spin_unlock_irqrestore(&priv->lock, flags);
+        return retval;
+}
+
+static void isp1760_endpoint_disable(struct usb_hcd *usb_hcd,
+                struct usb_host_endpoint *ep)
+{
+        struct isp1760_hcd *priv = hcd_to_priv(usb_hcd);
+        struct isp1760_qh *qh;
+        struct isp1760_qtd *qtd;
+        u32 flags;
+
+        spin_lock_irqsave(&priv->lock, flags);
+        qh = ep->hcpriv;
+        if (!qh)
+                goto out;
+
+        ep->hcpriv = NULL;
+        do {
+                /* more than entry might get removed */
+                if (list_empty(&qh->qtd_list))
+                        break;
+
+                qtd = list_first_entry(&qh->qtd_list, struct isp1760_qtd,
+                                qtd_list);
+
+                if (qtd->status & URB_ENQUEUED) {
+
+                        spin_unlock_irqrestore(&priv->lock, flags);
+                        isp1760_urb_dequeue(usb_hcd, qtd->urb, -ECONNRESET);
+                        spin_lock_irqsave(&priv->lock, flags);
+                } else {
+                        struct urb *urb;
+
+                        urb = qtd->urb;
+                        clean_up_qtdlist(qtd);
+                        isp1760_urb_done(priv, urb, -ECONNRESET);
+                }
+        } while (1);
+
+        qh_destroy(qh);
+        /* remove requests and leak them.
+         * ATL are pretty fast done, INT could take a while...
+         * The latter shoule be removed
+         */
+out:
+        spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static int isp1760_get_frame(struct usb_hcd *hcd)
+{
+        struct isp1760_hcd *priv = hcd_to_priv(hcd);
+        u32 fr;
+
+        fr = isp1760_readl(hcd->regs + HC_FRINDEX);
+        return (fr >> 3) % priv->periodic_size;
+}
+
+static void isp1760_stop(struct usb_hcd *hcd)
+{
+        struct isp1760_hcd *priv = hcd_to_priv(hcd);
+
+        isp1760_hub_control(hcd, ClearPortFeature, USB_PORT_FEAT_POWER, 1,
+                        NULL, 0);
+        mdelay(20);
+
+        spin_lock_irq(&priv->lock);
+        ehci_reset(priv);
+        /* Disable IRQ */
+        isp1760_writel(HW_DATA_BUS_32BIT, hcd->regs + HC_HW_MODE_CTRL);
+        spin_unlock_irq(&priv->lock);
+
+        isp1760_writel(0, hcd->regs + HC_CONFIGFLAG);
+}
+
+static void isp1760_shutdown(struct usb_hcd *hcd)
+{
+        u32 command;
+
+        isp1760_stop(hcd);
+        isp1760_writel(HW_DATA_BUS_32BIT, hcd->regs + HC_HW_MODE_CTRL);
+
+        command = isp1760_readl(hcd->regs + HC_USBCMD);
+        command &= ~CMD_RUN;
+        isp1760_writel(command, hcd->regs + HC_USBCMD);
+}
+
+static const struct hc_driver isp1760_hc_driver = {
+        .description            = "isp1760-hcd",
+        .product_desc           = "NXP ISP1760 USB Host Controller",
+        .hcd_priv_size          = sizeof(struct isp1760_hcd),
+        .irq                    = isp1760_irq,
+        .flags                  = HCD_MEMORY | HCD_USB2,
+        .reset                  = isp1760_hc_setup,
+        .start                  = isp1760_run,
+        .stop                   = isp1760_stop,
+        .shutdown               = isp1760_shutdown,
+        .urb_enqueue            = isp1760_urb_enqueue,
+        .urb_dequeue            = isp1760_urb_dequeue,
+        .endpoint_disable       = isp1760_endpoint_disable,
+        .get_frame_number       = isp1760_get_frame,
+        .hub_status_data        = isp1760_hub_status_data,
+        .hub_control            = isp1760_hub_control,
+};
+
+int __init init_kmem_once(void)
+{
+        qtd_cachep = kmem_cache_create("isp1760_qtd",
+                        sizeof(struct isp1760_qtd), 0, SLAB_TEMPORARY |
+                        SLAB_MEM_SPREAD, NULL);
+
+        if (!qtd_cachep)
+                return -ENOMEM;
+
+        qh_cachep = kmem_cache_create("isp1760_qh", sizeof(struct isp1760_qh),
+                        0, SLAB_TEMPORARY | SLAB_MEM_SPREAD, NULL);
+
+        if (!qh_cachep) {
+                kmem_cache_destroy(qtd_cachep);
+                return -ENOMEM;
+        }
+
+        return 0;
+}
+
+void deinit_kmem_cache(void)
+{
+        kmem_cache_destroy(qtd_cachep);
+        kmem_cache_destroy(qh_cachep);
+}
+
+struct usb_hcd *isp1760_register(u64 res_start, u64 res_len, int irq,
+                u64 irqflags, struct device *dev, const char *busname)
+{
+        struct usb_hcd *hcd;
+        struct isp1760_hcd *priv;
+        int ret;
+
+        if (usb_disabled())
+                return ERR_PTR(-ENODEV);
+
+        /* prevent usb-core allocating DMA pages */
+        dev->dma_mask = NULL;
+
+        hcd = usb_create_hcd(&isp1760_hc_driver, dev, dev->bus_id);
+        if (!hcd)
+                return ERR_PTR(-ENOMEM);
+
+        priv = hcd_to_priv(hcd);
+        init_memory(priv);
+        hcd->regs = ioremap(res_start, res_len);
+        if (!hcd->regs) {
+                ret = -EIO;
+                goto err_put;
+        }
+
+        ret = usb_add_hcd(hcd, irq, irqflags);
+        if (ret)
+                goto err_unmap;
+
+        hcd->irq = irq;
+        hcd->rsrc_start = res_start;
+        hcd->rsrc_len = res_len;
+
+        return hcd;
+
+err_unmap:
+         iounmap(hcd->regs);
+
+err_put:
+         usb_put_hcd(hcd);
+
+         return ERR_PTR(ret);
+}
+
+MODULE_DESCRIPTION("Driver for the ISP1760 USB-controller from NXP");
+MODULE_AUTHOR("Sebastian Siewior <bigeasy@linuxtronix.de>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/host/isp1760-hcd.h b/drivers/usb/host/isp1760-hcd.h
new file mode 100644
index 000000000000..3d86d0f6b147
--- /dev/null
+++ b/drivers/usb/host/isp1760-hcd.h
@@ -0,0 +1,206 @@
+#ifndef _ISP1760_HCD_H_
+#define _ISP1760_HCD_H_
+
+/* exports for if */
+struct usb_hcd *isp1760_register(u64 res_start, u64 res_len, int irq,
+                u64 irqflags, struct device *dev, const char *busname);
+int init_kmem_once(void);
+void deinit_kmem_cache(void);
+
+/* EHCI capability registers */
+#define HC_CAPLENGTH            0x00
+#define HC_HCSPARAMS            0x04
+#define HC_HCCPARAMS            0x08
+
+/* EHCI operational registers */
+#define HC_USBCMD               0x20
+#define HC_USBSTS               0x24
+#define HC_FRINDEX              0x2c
+#define HC_CONFIGFLAG           0x60
+#define HC_PORTSC1              0x64
+#define HC_ISO_PTD_DONEMAP_REG  0x130
+#define HC_ISO_PTD_SKIPMAP_REG  0x134
+#define HC_ISO_PTD_LASTPTD_REG  0x138
+#define HC_INT_PTD_DONEMAP_REG  0x140
+#define HC_INT_PTD_SKIPMAP_REG  0x144
+#define HC_INT_PTD_LASTPTD_REG  0x148
+#define HC_ATL_PTD_DONEMAP_REG  0x150
+#define HC_ATL_PTD_SKIPMAP_REG  0x154
+#define HC_ATL_PTD_LASTPTD_REG  0x158
+
+/* Configuration Register */
+#define HC_HW_MODE_CTRL         0x300
+#define ALL_ATX_RESET           (1 << 31)
+#define HW_DATA_BUS_32BIT       (1 << 8)
+#define HW_DACK_POL_HIGH        (1 << 6)
+#define HW_DREQ_POL_HIGH        (1 << 5)
+#define HW_INTR_HIGH_ACT        (1 << 2)
+#define HW_INTR_EDGE_TRIG       (1 << 1)
+#define HW_GLOBAL_INTR_EN       (1 << 0)
+
+#define HC_CHIP_ID_REG          0x304
+#define HC_SCRATCH_REG          0x308
+
+#define HC_RESET_REG            0x30c
+#define SW_RESET_RESET_HC       (1 << 1)
+#define SW_RESET_RESET_ALL      (1 << 0)
+
+#define HC_BUFFER_STATUS_REG    0x334
+#define ATL_BUFFER              0x1
+#define INT_BUFFER              0x2
+#define ISO_BUFFER              0x4
+#define BUFFER_MAP              0x7
+
+#define HC_MEMORY_REG           0x33c
+#define HC_PORT1_CTRL           0x374
+#define PORT1_POWER             (3 << 3)
+#define PORT1_INIT1             (1 << 7)
+#define PORT1_INIT2             (1 << 23)
+
+/* Interrupt Register */
+#define HC_INTERRUPT_REG        0x310
+
+#define HC_INTERRUPT_ENABLE     0x314
+#define INTERRUPT_ENABLE_MASK   (HC_INTL_INT | HC_ATL_INT | HC_EOT_INT)
+#define FINAL_HW_CONFIG (HW_GLOBAL_INTR_EN | HW_DATA_BUS_32BIT)
+
+#define HC_ISO_INT              (1 << 9)
+#define HC_ATL_INT              (1 << 8)
+#define HC_INTL_INT             (1 << 7)
+#define HC_EOT_INT              (1 << 3)
+#define HC_SOT_INT              (1 << 1)
+
+#define HC_ISO_IRQ_MASK_OR_REG  0x318
+#define HC_INT_IRQ_MASK_OR_REG  0x31C
+#define HC_ATL_IRQ_MASK_OR_REG  0x320
+#define HC_ISO_IRQ_MASK_AND_REG 0x324
+#define HC_INT_IRQ_MASK_AND_REG 0x328
+#define HC_ATL_IRQ_MASK_AND_REG 0x32C
+
+/* Register sets */
+#define HC_BEGIN_OF_ATL         0x0c00
+#define HC_BEGIN_OF_INT         0x0800
+#define HC_BEGIN_OF_ISO         0x0400
+#define HC_BEGIN_OF_PAYLOAD     0x1000
+
+/* urb state*/
+#define DELETE_URB              (0x0008)
+#define NO_TRANSFER_ACTIVE      (0xffffffff)
+
+#define ATL_REGS_OFFSET         (0xc00)
+#define INT_REGS_OFFSET         (0x800)
+
+/* Philips Transfer Descriptor (PTD) */
+struct ptd {
+        __le32 dw0;
+        __le32 dw1;
+        __le32 dw2;
+        __le32 dw3;
+        __le32 dw4;
+        __le32 dw5;
+        __le32 dw6;
+        __le32 dw7;
+};
+
+struct inter_packet_info {
+        void *data_buffer;
+        u32 payload;
+#define PTD_FIRE_NEXT           (1 << 0)
+#define PTD_URB_FINISHED        (1 << 1)
+        struct urb *urb;
+        struct isp1760_qh *qh;
+        struct isp1760_qtd *qtd;
+};
+
+
+typedef void (packet_enqueue)(struct usb_hcd *hcd, struct isp1760_qh *qh,
+                struct isp1760_qtd *qtd);
+
+#define isp1760_info(priv, fmt, args...) \
+        dev_info(priv_to_hcd(priv)->self.controller, fmt, ##args)
+
+#define isp1760_err(priv, fmt, args...) \
+        dev_err(priv_to_hcd(priv)->self.controller, fmt, ##args)
+
+/* chip memory management */
+struct memory_chunk {
+        unsigned int start;
+        unsigned int size;
+        unsigned int free;
+};
+
+/*
+ * 60kb divided in:
+ * - 32 blocks @ 256  bytes
+ * - 20 blocks @ 1024 bytes
+ * -  4 blocks @ 8192 bytes
+ */
+
+#define BLOCK_1_NUM 32
+#define BLOCK_2_NUM 20
+#define BLOCK_3_NUM 4
+
+#define BLOCK_1_SIZE 256
+#define BLOCK_2_SIZE 1024
+#define BLOCK_3_SIZE 8192
+#define BLOCKS (BLOCK_1_NUM + BLOCK_2_NUM + BLOCK_3_NUM)
+#define PAYLOAD_SIZE 0xf000
+
+/* I saw if some reloads if the pointer was negative */
+#define ISP1760_NULL_POINTER    (0x400)
+
+/* ATL */
+/* DW0 */
+#define PTD_VALID                       1
+#define PTD_LENGTH(x)                   (((u32) x) << 3)
+#define PTD_MAXPACKET(x)                (((u32) x) << 18)
+#define PTD_MULTI(x)                    (((u32) x) << 29)
+#define PTD_ENDPOINT(x)                 (((u32) x) << 31)
+/* DW1 */
+#define PTD_DEVICE_ADDR(x)              (((u32) x) << 3)
+#define PTD_PID_TOKEN(x)                (((u32) x) << 10)
+#define PTD_TRANS_BULK                  ((u32) 2 << 12)
+#define PTD_TRANS_INT                   ((u32) 3 << 12)
+#define PTD_TRANS_SPLIT                 ((u32) 1 << 14)
+#define PTD_SE_USB_LOSPEED              ((u32) 2 << 16)
+#define PTD_PORT_NUM(x)                 (((u32) x) << 18)
+#define PTD_HUB_NUM(x)                  (((u32) x) << 25)
+#define PTD_PING(x)                     (((u32) x) << 26)
+/* DW2 */
+#define PTD_RL_CNT(x)                   (((u32) x) << 25)
+#define PTD_DATA_START_ADDR(x)          (((u32) x) << 8)
+#define BASE_ADDR                       0x1000
+/* DW3 */
+#define PTD_CERR(x)                     (((u32) x) << 23)
+#define PTD_NAC_CNT(x)                  (((u32) x) << 19)
+#define PTD_ACTIVE                      ((u32) 1 << 31)
+#define PTD_DATA_TOGGLE(x)              (((u32) x) << 25)
+
+#define DW3_HALT_BIT                    (1 << 30)
+#define DW3_ERROR_BIT                   (1 << 28)
+#define DW3_QTD_ACTIVE                  (1 << 31)
+
+#define INT_UNDERRUN                    (1 << 2)
+#define INT_BABBLE                      (1 << 1)
+#define INT_EXACT                       (1 << 0)
+
+#define DW1_GET_PID(x)                  (((x) >> 10) & 0x3)
+#define PTD_XFERRED_LENGTH(x)           ((x) & 0x7fff)
+#define PTD_XFERRED_LENGTH_LO(x)        ((x) & 0x7ff)
+
+#define SETUP_PID       (2)
+#define IN_PID          (1)
+#define OUT_PID         (0)
+#define GET_QTD_TOKEN_TYPE(x)   ((x) & 0x3)
+
+#define DATA_TOGGLE             (1 << 31)
+#define GET_DATA_TOGGLE(x)      ((x) >> 31)
+
+/* Errata 1 */
+#define RL_COUNTER      (0)
+#define NAK_COUNTER     (0)
+#define ERR_COUNTER     (2)
+
+#define HC_ATL_PL_SIZE  (8192)
+
+#endif
diff --git a/drivers/usb/host/isp1760-if.c b/drivers/usb/host/isp1760-if.c
new file mode 100644
index 000000000000..73fb2a38f1e4
--- /dev/null
+++ b/drivers/usb/host/isp1760-if.c
@@ -0,0 +1,298 @@
+/*
+ * Glue code for the ISP1760 driver and bus
+ * Currently there is support for
+ * - OpenFirmware
+ * - PCI
+ *
+ * (c) 2007 Sebastian Siewior <bigeasy@linutronix.de>
+ *
+ */
+
+#include <linux/usb.h>
+#include <linux/io.h>
+
+#include "../core/hcd.h"
+#include "isp1760-hcd.h"
+
+#ifdef CONFIG_USB_ISP1760_OF
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#endif
+
+#ifdef CONFIG_USB_ISP1760_PCI
+#include <linux/pci.h>
+#endif
+
+#ifdef CONFIG_USB_ISP1760_OF
+static int of_isp1760_probe(struct of_device *dev,
+                const struct of_device_id *match)
+{
+        struct usb_hcd *hcd;
+        struct device_node *dp = dev->node;
+        struct resource *res;
+        struct resource memory;
+        struct of_irq oirq;
+        int virq;
+        u64 res_len;
+        int ret;
+
+        ret = of_address_to_resource(dp, 0, &memory);
+        if (ret)
+                return -ENXIO;
+
+        res = request_mem_region(memory.start, memory.end - memory.start + 1,
+                        dev->dev.bus_id);
+        if (!res)
+                return -EBUSY;
+
+        res_len = memory.end - memory.start + 1;
+
+        if (of_irq_map_one(dp, 0, &oirq)) {
+                ret = -ENODEV;
+                goto release_reg;
+        }
+
+        virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
+                        oirq.size);
+
+        hcd = isp1760_register(memory.start, res_len, virq,
+                IRQF_SHARED | IRQF_DISABLED, &dev->dev, dev->dev.bus_id);
+        if (IS_ERR(hcd)) {
+                ret = PTR_ERR(hcd);
+                goto release_reg;
+        }
+
+        dev_set_drvdata(&dev->dev, hcd);
+        return ret;
+
+release_reg:
+        release_mem_region(memory.start, memory.end - memory.start + 1);
+        return ret;
+}
+
+static int of_isp1760_remove(struct of_device *dev)
+{
+        struct usb_hcd *hcd = dev_get_drvdata(&dev->dev);
+
+        dev_set_drvdata(&dev->dev, NULL);
+
+        usb_remove_hcd(hcd);
+        iounmap(hcd->regs);
+        release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+        usb_put_hcd(hcd);
+        return 0;
+}
+
+static struct of_device_id of_isp1760_match[] = {
+        {
+                .compatible = "nxp,usb-isp1760",
+        },
+        { },
+};
+MODULE_DEVICE_TABLE(of, of_isp1760_match);
+
+static struct of_platform_driver isp1760_of_driver = {
+        .name           = "nxp-isp1760",
+        .match_table    = of_isp1760_match,
+        .probe          = of_isp1760_probe,
+        .remove         = of_isp1760_remove,
+};
+#endif
+
+#ifdef CONFIG_USB_ISP1760_PCI
+static u32 nxp_pci_io_base;
+static u32 iolength;
+static u32 pci_mem_phy0;
+static u32 length;
+static u8 *chip_addr;
+static u8 *iobase;
+
+static int __devinit isp1761_pci_probe(struct pci_dev *dev,
+                const struct pci_device_id *id)
+{
+        u8 latency, limit;
+        __u32 reg_data;
+        int retry_count;
+        int length;
+        int status = 1;
+        struct usb_hcd *hcd;
+
+        if (usb_disabled())
+                return -ENODEV;
+
+        if (pci_enable_device(dev) < 0)
+                return -ENODEV;
+
+        if (!dev->irq)
+                return -ENODEV;
+
+        /* Grab the PLX PCI mem maped port start address we need  */
+        nxp_pci_io_base = pci_resource_start(dev, 0);
+        iolength = pci_resource_len(dev, 0);
+
+        if (!request_mem_region(nxp_pci_io_base, iolength, "ISP1761 IO MEM")) {
+                printk(KERN_ERR "request region #1\n");
+                return -EBUSY;
+        }
+
+        iobase = ioremap_nocache(nxp_pci_io_base, iolength);
+        if (!iobase) {
+                printk(KERN_ERR "ioremap #1\n");
+                release_mem_region(nxp_pci_io_base, iolength);
+                return -ENOMEM;
+        }
+        /* Grab the PLX PCI shared memory of the ISP 1761 we need  */
+        pci_mem_phy0 = pci_resource_start(dev, 3);
+        length = pci_resource_len(dev, 3);
+
+        if (length < 0xffff) {
+                printk(KERN_ERR "memory length for this resource is less than "
+                                "required\n");
+                release_mem_region(nxp_pci_io_base, iolength);
+                iounmap(iobase);
+                return  -ENOMEM;
+        }
+
+        if (!request_mem_region(pci_mem_phy0, length, "ISP-PCI")) {
+                printk(KERN_ERR "host controller already in use\n");
+                release_mem_region(nxp_pci_io_base, iolength);
+                iounmap(iobase);
+                return -EBUSY;
+        }
+
+        /* bad pci latencies can contribute to overruns */
+        pci_read_config_byte(dev, PCI_LATENCY_TIMER, &latency);
+        if (latency) {
+                pci_read_config_byte(dev, PCI_MAX_LAT, &limit);
+                if (limit && limit < latency)
+                        pci_write_config_byte(dev, PCI_LATENCY_TIMER, limit);
+        }
+
+        /* Try to check whether we can access Scratch Register of
+         * Host Controller or not. The initial PCI access is retried until
+         * local init for the PCI bridge is completed
+         */
+        retry_count = 20;
+        reg_data = 0;
+        while ((reg_data != 0xFACE) && retry_count) {
+                /*by default host is in 16bit mode, so
+                 * io operations at this stage must be 16 bit
+                 * */
+                writel(0xface, chip_addr + HC_SCRATCH_REG);
+                udelay(100);
+                reg_data = readl(chip_addr + HC_SCRATCH_REG);
+                retry_count--;
+        }
+
+        /* Host Controller presence is detected by writing to scratch register
+         * and reading back and checking the contents are same or not
+         */
+        if (reg_data != 0xFACE) {
+                err("scratch register mismatch %x", reg_data);
+                goto clean;
+        }
+
+        pci_set_master(dev);
+
+        status = readl(iobase + 0x68);
+        status |= 0x900;
+        writel(status, iobase + 0x68);
+
+        dev->dev.dma_mask = NULL;
+        hcd = isp1760_register(pci_mem_phy0, length, dev->irq,
+                IRQF_SHARED | IRQF_DISABLED, &dev->dev, dev->dev.bus_id);
+        pci_set_drvdata(dev, hcd);
+        if (!hcd)
+                return 0;
+clean:
+        status = -ENODEV;
+        iounmap(iobase);
+        release_mem_region(pci_mem_phy0, length);
+        release_mem_region(nxp_pci_io_base, iolength);
+        return status;
+}
+static void isp1761_pci_remove(struct pci_dev *dev)
+{
+        struct usb_hcd *hcd;
+
+        hcd = pci_get_drvdata(dev);
+
+        usb_remove_hcd(hcd);
+        iounmap(hcd->regs);
+        release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+        usb_put_hcd(hcd);
+
+        pci_disable_device(dev);
+
+        iounmap(iobase);
+        iounmap(chip_addr);
+
+        release_mem_region(nxp_pci_io_base, iolength);
+        release_mem_region(pci_mem_phy0, length);
+}
+
+static void isp1761_pci_shutdown(struct pci_dev *dev)
+{
+        printk(KERN_ERR "ips1761_pci_shutdown\n");
+}
+
+static const struct pci_device_id isp1760_plx [] = { {
+        /* handle any USB 2.0 EHCI controller */
+        PCI_DEVICE_CLASS(((PCI_CLASS_BRIDGE_OTHER << 8) | (0x06 << 16)), ~0),
+                .driver_data = 0,
+},
+{ /* end: all zeroes */ }
+};
+MODULE_DEVICE_TABLE(pci, isp1760_plx);
+
+static struct pci_driver isp1761_pci_driver = {
+        .name =         "isp1760",
+        .id_table =     isp1760_plx,
+        .probe =        isp1761_pci_probe,
+        .remove =       isp1761_pci_remove,
+        .shutdown =     isp1761_pci_shutdown,
+};
+#endif
+
+static int __init isp1760_init(void)
+{
+        int ret;
+
+        init_kmem_once();
+
+#ifdef CONFIG_USB_ISP1760_OF
+        ret = of_register_platform_driver(&isp1760_of_driver);
+        if (ret) {
+                deinit_kmem_cache();
+                return ret;
+        }
+#endif
+#ifdef CONFIG_USB_ISP1760_PCI
+        ret = pci_register_driver(&isp1761_pci_driver);
+        if (ret)
+                goto unreg_of;
+#endif
+        return ret;
+
+#ifdef CONFIG_USB_ISP1760_PCI
+unreg_of:
+#endif
+#ifdef CONFIG_USB_ISP1760_OF
+        of_unregister_platform_driver(&isp1760_of_driver);
+#endif
+        deinit_kmem_cache();
+        return ret;
+}
+module_init(isp1760_init);
+
+static void __exit isp1760_exit(void)
+{
+#ifdef CONFIG_USB_ISP1760_OF
+        of_unregister_platform_driver(&isp1760_of_driver);
+#endif
+#ifdef CONFIG_USB_ISP1760_PCI
+        pci_unregister_driver(&isp1761_pci_driver);
+#endif
+        deinit_kmem_cache();
+}
+module_exit(isp1760_exit);
diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c
index 17dc2eccda83..79a78029f896 100644
--- a/drivers/usb/host/ohci-hub.c
+++ b/drivers/usb/host/ohci-hub.c
@@ -613,7 +613,7 @@ static void start_hnp(struct ohci_hcd *ohci);
 static inline int root_port_reset (struct ohci_hcd *ohci, unsigned port)
 {
         __hc32 __iomem *portstat = &ohci->regs->roothub.portstatus [port];
-        u32     temp;
+        u32     temp = 0;
         u16     now = ohci_readl(ohci, &ohci->regs->fmnumber);
         u16     reset_done = now + PORT_RESET_MSEC;
         int     limit_1 = DIV_ROUND_UP(PORT_RESET_MSEC, PORT_RESET_HW_MSEC);
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index d3e0d8aa3980..3a7bfe7a8874 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -234,7 +234,7 @@ static int resume_detect_interrupts_are_broken(struct uhci_hcd *uhci)
         return 0;
 }
 
-static int remote_wakeup_is_broken(struct uhci_hcd *uhci)
+static int global_suspend_mode_is_broken(struct uhci_hcd *uhci)
 {
         int port;
         const char *sys_info;
@@ -261,27 +261,60 @@ __releases(uhci->lock)
 __acquires(uhci->lock)
 {
         int auto_stop;
-        int int_enable, egsm_enable;
+        int int_enable, egsm_enable, wakeup_enable;
         struct usb_device *rhdev = uhci_to_hcd(uhci)->self.root_hub;
 
         auto_stop = (new_state == UHCI_RH_AUTO_STOPPED);
         dev_dbg(&rhdev->dev, "%s%s\n", __func__,
                         (auto_stop ? " (auto-stop)" : ""));
 
-        /* Enable resume-detect interrupts if they work.
-         * Then enter Global Suspend mode if _it_ works, still configured.
+        /* Start off by assuming Resume-Detect interrupts and EGSM work
+         * and that remote wakeups should be enabled.
          */
         egsm_enable = USBCMD_EGSM;
-        uhci->working_RD = 1;
+        uhci->RD_enable = 1;
         int_enable = USBINTR_RESUME;
-        if (remote_wakeup_is_broken(uhci))
-                egsm_enable = 0;
-        if (resume_detect_interrupts_are_broken(uhci) || !egsm_enable ||
+        wakeup_enable = 1;
+
+        /* In auto-stop mode wakeups must always be detected, but
+         * Resume-Detect interrupts may be prohibited.  (In the absence
+         * of CONFIG_PM, they are always disallowed.)
+         */
+        if (auto_stop) {
+                if (!device_may_wakeup(&rhdev->dev))
+                        int_enable = 0;
+
+        /* In bus-suspend mode wakeups may be disabled, but if they are
+         * allowed then so are Resume-Detect interrupts.
+         */
+        } else {
 #ifdef CONFIG_PM
-                        (!auto_stop && !rhdev->do_remote_wakeup) ||
+                if (!rhdev->do_remote_wakeup)
+                        wakeup_enable = 0;
 #endif
-                        (auto_stop && !device_may_wakeup(&rhdev->dev)))
-                uhci->working_RD = int_enable = 0;
+        }
+
+        /* EGSM causes the root hub to echo a 'K' signal (resume) out any
+         * port which requests a remote wakeup.  According to the USB spec,
+         * every hub is supposed to do this.  But if we are ignoring
+         * remote-wakeup requests anyway then there's no point to it.
+         * We also shouldn't enable EGSM if it's broken.
+         */
+        if (!wakeup_enable || global_suspend_mode_is_broken(uhci))
+                egsm_enable = 0;
+
+        /* If we're ignoring wakeup events then there's no reason to
+         * enable Resume-Detect interrupts.  We also shouldn't enable
+         * them if they are broken or disallowed.
+         *
+         * This logic may lead us to enabling RD but not EGSM.  The UHCI
+         * spec foolishly says that RD works only when EGSM is on, but
+         * there's no harm in enabling it anyway -- perhaps some chips
+         * will implement it!
+         */
+        if (!wakeup_enable || resume_detect_interrupts_are_broken(uhci) ||
+                        !int_enable)
+                uhci->RD_enable = int_enable = 0;
 
         outw(int_enable, uhci->io_addr + USBINTR);
         outw(egsm_enable | USBCMD_CF, uhci->io_addr + USBCMD);
@@ -308,7 +341,11 @@ __acquires(uhci->lock)
 
         uhci->rh_state = new_state;
         uhci->is_stopped = UHCI_IS_STOPPED;
-        uhci_to_hcd(uhci)->poll_rh = !int_enable;
+
+        /* If interrupts don't work and remote wakeup is enabled then
+         * the suspended root hub needs to be polled.
+         */
+        uhci_to_hcd(uhci)->poll_rh = (!int_enable && wakeup_enable);
 
         uhci_scan_schedule(uhci);
         uhci_fsbr_off(uhci);
@@ -344,9 +381,12 @@ __acquires(uhci->lock)
          * for 20 ms.
          */
         if (uhci->rh_state == UHCI_RH_SUSPENDED) {
+                unsigned egsm;
+
+                /* Keep EGSM on if it was set before */
+                egsm = inw(uhci->io_addr + USBCMD) & USBCMD_EGSM;
                 uhci->rh_state = UHCI_RH_RESUMING;
-                outw(USBCMD_FGR | USBCMD_EGSM | USBCMD_CF,
-                                uhci->io_addr + USBCMD);
+                outw(USBCMD_FGR | USBCMD_CF | egsm, uhci->io_addr + USBCMD);
                 spin_unlock_irq(&uhci->lock);
                 msleep(20);
                 spin_lock_irq(&uhci->lock);
@@ -801,8 +841,10 @@ static int uhci_pci_resume(struct usb_hcd *hcd)
 
         spin_unlock_irq(&uhci->lock);
 
-        if (!uhci->working_RD) {
-                /* Suspended root hub needs to be polled */
+        /* If interrupts don't work and remote wakeup is enabled then
+         * the suspended root hub needs to be polled.
+         */
+        if (!uhci->RD_enable && hcd->self.root_hub->do_remote_wakeup) {
                 hcd->poll_rh = 1;
                 usb_hcd_poll_rh_status(hcd);
         }
diff --git a/drivers/usb/host/uhci-hcd.h b/drivers/usb/host/uhci-hcd.h
index 340d6ed3e6e9..7d01c5677f92 100644
--- a/drivers/usb/host/uhci-hcd.h
+++ b/drivers/usb/host/uhci-hcd.h
@@ -400,8 +400,9 @@ struct uhci_hcd {
         unsigned int scan_in_progress:1;        /* Schedule scan is running */
         unsigned int need_rescan:1;             /* Redo the schedule scan */
         unsigned int dead:1;                    /* Controller has died */
-        unsigned int working_RD:1;              /* Suspended root hub doesn't
-                                                   need to be polled */
+        unsigned int RD_enable:1;               /* Suspended root hub with
+                                                   Resume-Detect interrupts
+                                                   enabled */
         unsigned int is_initialized:1;          /* Data structure is usable */
         unsigned int fsbr_is_on:1;              /* FSBR is turned on */
         unsigned int fsbr_is_wanted:1;          /* Does any URB want FSBR? */
diff --git a/drivers/usb/misc/ldusb.c b/drivers/usb/misc/ldusb.c
index 11580e81e2c6..7aafd53fbcab 100644
--- a/drivers/usb/misc/ldusb.c
+++ b/drivers/usb/misc/ldusb.c
@@ -148,7 +148,7 @@ MODULE_PARM_DESC(min_interrupt_out_interval, "Minimum interrupt out interval in
 
 /* Structure to hold all of our device specific stuff */
 struct ld_usb {
-        struct semaphore        sem;            /* locks this structure */
+        struct mutex            mutex;          /* locks this structure */
         struct usb_interface*   intf;           /* save off the usb interface pointer */
 
         int                     open_count;     /* number of times this port has been opened */
@@ -319,7 +319,7 @@ static int ld_usb_open(struct inode *inode, struct file *file)
                 return -ENODEV;
 
         /* lock this device */
-        if (down_interruptible(&dev->sem))
+        if (mutex_lock_interruptible(&dev->mutex))
                 return -ERESTARTSYS;
 
         /* allow opening only once */
@@ -358,7 +358,7 @@ static int ld_usb_open(struct inode *inode, struct file *file)
         file->private_data = dev;
 
 unlock_exit:
-        up(&dev->sem);
+        mutex_unlock(&dev->mutex);
 
         return retval;
 }
@@ -378,7 +378,7 @@ static int ld_usb_release(struct inode *inode, struct file *file)
                 goto exit;
         }
 
-        if (down_interruptible(&dev->sem)) {
+        if (mutex_lock_interruptible(&dev->mutex)) {
                 retval = -ERESTARTSYS;
                 goto exit;
         }
@@ -389,7 +389,7 @@ static int ld_usb_release(struct inode *inode, struct file *file)
         }
         if (dev->intf == NULL) {
                 /* the device was unplugged before the file was released */
-                up(&dev->sem);
+                mutex_unlock(&dev->mutex);
                 /* unlock here as ld_usb_delete frees dev */
                 ld_usb_delete(dev);
                 goto exit;
@@ -402,7 +402,7 @@ static int ld_usb_release(struct inode *inode, struct file *file)
         dev->open_count = 0;
 
 unlock_exit:
-        up(&dev->sem);
+        mutex_unlock(&dev->mutex);
 
 exit:
         return retval;
@@ -448,7 +448,7 @@ static ssize_t ld_usb_read(struct file *file, char __user *buffer, size_t count,
                 goto exit;
 
         /* lock this object */
-        if (down_interruptible(&dev->sem)) {
+        if (mutex_lock_interruptible(&dev->mutex)) {
                 retval = -ERESTARTSYS;
                 goto exit;
         }
@@ -505,7 +505,7 @@ static ssize_t ld_usb_read(struct file *file, char __user *buffer, size_t count,
 
 unlock_exit:
         /* unlock the device */
-        up(&dev->sem);
+        mutex_unlock(&dev->mutex);
 
 exit:
         return retval;
@@ -528,7 +528,7 @@ static ssize_t ld_usb_write(struct file *file, const char __user *buffer,
                 goto exit;
 
         /* lock this object */
-        if (down_interruptible(&dev->sem)) {
+        if (mutex_lock_interruptible(&dev->mutex)) {
                 retval = -ERESTARTSYS;
                 goto exit;
         }
@@ -602,7 +602,7 @@ static ssize_t ld_usb_write(struct file *file, const char __user *buffer,
 
 unlock_exit:
         /* unlock the device */
-        up(&dev->sem);
+        mutex_unlock(&dev->mutex);
 
 exit:
         return retval;
@@ -651,7 +651,7 @@ static int ld_usb_probe(struct usb_interface *intf, const struct usb_device_id *
                 dev_err(&intf->dev, "Out of memory\n");
                 goto exit;
         }
-        init_MUTEX(&dev->sem);
+        mutex_init(&dev->mutex);
         spin_lock_init(&dev->rbsl);
         dev->intf = intf;
         init_waitqueue_head(&dev->read_wait);
@@ -765,15 +765,15 @@ static void ld_usb_disconnect(struct usb_interface *intf)
         /* give back our minor */
         usb_deregister_dev(intf, &ld_usb_class);
 
-        down(&dev->sem);
+        mutex_lock(&dev->mutex);
 
         /* if the device is not opened, then we clean up right now */
         if (!dev->open_count) {
-                up(&dev->sem);
+                mutex_unlock(&dev->mutex);
                 ld_usb_delete(dev);
         } else {
                 dev->intf = NULL;
-                up(&dev->sem);
+                mutex_unlock(&dev->mutex);
         }
 
         dev_info(&intf->dev, "LD USB Device #%d now disconnected\n",
diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
index a51983854ca0..742be3c35947 100644
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -79,30 +79,10 @@ static struct usb_device *testdev_to_usbdev (struct usbtest_dev *test)
 /* set up all urbs so they can be used with either bulk or interrupt */
 #define INTERRUPT_RATE          1       /* msec/transfer */
 
-#define xprintk(tdev,level,fmt,args...) \
-        dev_printk(level ,  &(tdev)->intf->dev ,  fmt ,  ## args)
-
-#ifdef DEBUG
-#define DBG(dev,fmt,args...) \
-        xprintk(dev , KERN_DEBUG , fmt , ## args)
-#else
-#define DBG(dev,fmt,args...) \
-        do { } while (0)
-#endif /* DEBUG */
-
-#ifdef VERBOSE
-#define VDBG DBG
-#else
-#define VDBG(dev,fmt,args...) \
-        do { } while (0)
-#endif  /* VERBOSE */
-
-#define ERROR(dev,fmt,args...) \
-        xprintk(dev , KERN_ERR , fmt , ## args)
-#define WARN(dev,fmt,args...) \
-        xprintk(dev , KERN_WARNING , fmt , ## args)
-#define INFO(dev,fmt,args...) \
-        xprintk(dev , KERN_INFO , fmt , ## args)
+#define ERROR(tdev, fmt, args...) \
+        dev_err(&(tdev)->intf->dev , fmt , ## args)
+#define WARN(tdev, fmt, args...) \
+        dev_warn(&(tdev)->intf->dev , fmt , ## args)
 
 /*-------------------------------------------------------------------------*/
 
@@ -236,7 +216,7 @@ static struct urb *simple_alloc_urb (
 
 static unsigned pattern = 0;
 module_param (pattern, uint, S_IRUGO);
-// MODULE_PARM_DESC (pattern, "i/o pattern (0 == zeroes)");
+MODULE_PARM_DESC(pattern, "i/o pattern (0 == zeroes)");
 
 static inline void simple_fill_buf (struct urb *urb)
 {
@@ -257,7 +237,7 @@ static inline void simple_fill_buf (struct urb *urb)
         }
 }
 
-static inline int simple_check_buf (struct urb *urb)
+static inline int simple_check_buf(struct usbtest_dev *tdev, struct urb *urb)
 {
         unsigned        i;
         u8              expected;
@@ -285,7 +265,7 @@ static inline int simple_check_buf (struct urb *urb)
                 }
                 if (*buf == expected)
                         continue;
-                dbg ("buf[%d] = %d (not %d)", i, *buf, expected);
+                ERROR(tdev, "buf[%d] = %d (not %d)\n", i, *buf, expected);
                 return -EINVAL;
         }
         return 0;
@@ -299,6 +279,7 @@ static void simple_free_urb (struct urb *urb)
 }
 
 static int simple_io (
+        struct usbtest_dev      *tdev,
         struct urb              *urb,
         int                     iterations,
         int                     vary,
@@ -324,7 +305,7 @@ static int simple_io (
                 retval = urb->status;
                 urb->dev = udev;
                 if (retval == 0 && usb_pipein (urb->pipe))
-                        retval = simple_check_buf (urb);
+                        retval = simple_check_buf(tdev, urb);
 
                 if (vary) {
                         int     len = urb->transfer_buffer_length;
@@ -341,7 +322,7 @@ static int simple_io (
         urb->transfer_buffer_length = max;
 
         if (expected != retval)
-                dev_dbg (&udev->dev,
+                dev_err(&udev->dev,
                         "%s failed, iterations left %d, status %d (not %d)\n",
                                 label, iterations, retval, expected);
         return retval;
@@ -357,7 +338,7 @@ static int simple_io (
 static void free_sglist (struct scatterlist *sg, int nents)
 {
         unsigned                i;
-        
+
         if (!sg)
                 return;
         for (i = 0; i < nents; i++) {
@@ -415,7 +396,7 @@ alloc_sglist (int nents, int max, int vary)
 }
 
 static int perform_sglist (
-        struct usb_device       *udev,
+        struct usbtest_dev      *tdev,
         unsigned                iterations,
         int                     pipe,
         struct usb_sg_request   *req,
@@ -423,6 +404,7 @@ static int perform_sglist (
         int                     nents
 )
 {
+        struct usb_device       *udev = testdev_to_usbdev(tdev);
         int                     retval = 0;
 
         while (retval == 0 && iterations-- > 0) {
@@ -431,7 +413,7 @@ static int perform_sglist (
                                         ? (INTERRUPT_RATE << 3)
                                         : INTERRUPT_RATE,
                                 sg, nents, 0, GFP_KERNEL);
-                
+
                 if (retval)
                         break;
                 usb_sg_wait (req);
@@ -446,7 +428,8 @@ static int perform_sglist (
         // failure if retval is as we expected ...
 
         if (retval)
-                dbg ("perform_sglist failed, iterations left %d, status %d",
+                ERROR(tdev, "perform_sglist failed, "
+                                "iterations left %d, status %d\n",
                                 iterations, retval);
         return retval;
 }
@@ -505,28 +488,28 @@ static int set_altsetting (struct usbtest_dev *dev, int alternate)
                         alternate);
 }
 
-static int is_good_config (char *buf, int len)
+static int is_good_config(struct usbtest_dev *tdev, int len)
 {
         struct usb_config_descriptor    *config;
-        
+
         if (len < sizeof *config)
                 return 0;
-        config = (struct usb_config_descriptor *) buf;
+        config = (struct usb_config_descriptor *) tdev->buf;
 
         switch (config->bDescriptorType) {
         case USB_DT_CONFIG:
         case USB_DT_OTHER_SPEED_CONFIG:
                 if (config->bLength != 9) {
-                        dbg ("bogus config descriptor length");
+                        ERROR(tdev, "bogus config descriptor length\n");
                         return 0;
                 }
                 /* this bit 'must be 1' but often isn't */
                 if (!realworld && !(config->bmAttributes & 0x80)) {
-                        dbg ("high bit of config attributes not set");
+                        ERROR(tdev, "high bit of config attributes not set\n");
                         return 0;
                 }
                 if (config->bmAttributes & 0x1f) {      /* reserved == 0 */
-                        dbg ("reserved config bits set");
+                        ERROR(tdev, "reserved config bits set\n");
                         return 0;
                 }
                 break;
@@ -538,7 +521,7 @@ static int is_good_config (char *buf, int len)
                 return 1;
         if (le16_to_cpu(config->wTotalLength) >= TBUF_SIZE)             /* max partial read */
                 return 1;
-        dbg ("bogus config descriptor read size");
+        ERROR(tdev, "bogus config descriptor read size\n");
         return 0;
 }
 
@@ -571,7 +554,7 @@ static int ch9_postconfig (struct usbtest_dev *dev)
                 /* 9.2.3 constrains the range here */
                 alt = iface->altsetting [i].desc.bAlternateSetting;
                 if (alt < 0 || alt >= iface->num_altsetting) {
-                        dev_dbg (&iface->dev,
+                        dev_err(&iface->dev,
                                         "invalid alt [%d].bAltSetting = %d\n",
                                         i, alt);
                 }
@@ -583,7 +566,7 @@ static int ch9_postconfig (struct usbtest_dev *dev)
                 /* [9.4.10] set_interface */
                 retval = set_altsetting (dev, alt);
                 if (retval) {
-                        dev_dbg (&iface->dev, "can't set_interface = %d, %d\n",
+                        dev_err(&iface->dev, "can't set_interface = %d, %d\n",
                                         alt, retval);
                         return retval;
                 }
@@ -591,7 +574,7 @@ static int ch9_postconfig (struct usbtest_dev *dev)
                 /* [9.4.4] get_interface always works */
                 retval = get_altsetting (dev);
                 if (retval != alt) {
-                        dev_dbg (&iface->dev, "get alt should be %d, was %d\n",
+                        dev_err(&iface->dev, "get alt should be %d, was %d\n",
                                         alt, retval);
                         return (retval < 0) ? retval : -EDOM;
                 }
@@ -611,7 +594,7 @@ static int ch9_postconfig (struct usbtest_dev *dev)
                                 USB_DIR_IN | USB_RECIP_DEVICE,
                                 0, 0, dev->buf, 1, USB_CTRL_GET_TIMEOUT);
                 if (retval != 1 || dev->buf [0] != expected) {
-                        dev_dbg (&iface->dev, "get config --> %d %d (1 %d)\n",
+                        dev_err(&iface->dev, "get config --> %d %d (1 %d)\n",
                                 retval, dev->buf[0], expected);
                         return (retval < 0) ? retval : -EDOM;
                 }
@@ -621,7 +604,7 @@ static int ch9_postconfig (struct usbtest_dev *dev)
         retval = usb_get_descriptor (udev, USB_DT_DEVICE, 0,
                         dev->buf, sizeof udev->descriptor);
         if (retval != sizeof udev->descriptor) {
-                dev_dbg (&iface->dev, "dev descriptor --> %d\n", retval);
+                dev_err(&iface->dev, "dev descriptor --> %d\n", retval);
                 return (retval < 0) ? retval : -EDOM;
         }
 
@@ -629,8 +612,8 @@ static int ch9_postconfig (struct usbtest_dev *dev)
         for (i = 0; i < udev->descriptor.bNumConfigurations; i++) {
                 retval = usb_get_descriptor (udev, USB_DT_CONFIG, i,
                                 dev->buf, TBUF_SIZE);
-                if (!is_good_config (dev->buf, retval)) {
-                        dev_dbg (&iface->dev,
+                if (!is_good_config(dev, retval)) {
+                        dev_err(&iface->dev,
                                         "config [%d] descriptor --> %d\n",
                                         i, retval);
                         return (retval < 0) ? retval : -EDOM;
@@ -650,14 +633,14 @@ static int ch9_postconfig (struct usbtest_dev *dev)
                                 sizeof (struct usb_qualifier_descriptor));
                 if (retval == -EPIPE) {
                         if (udev->speed == USB_SPEED_HIGH) {
-                                dev_dbg (&iface->dev,
+                                dev_err(&iface->dev,
                                                 "hs dev qualifier --> %d\n",
                                                 retval);
                                 return (retval < 0) ? retval : -EDOM;
                         }
                         /* usb2.0 but not high-speed capable; fine */
                 } else if (retval != sizeof (struct usb_qualifier_descriptor)) {
-                        dev_dbg (&iface->dev, "dev qualifier --> %d\n", retval);
+                        dev_err(&iface->dev, "dev qualifier --> %d\n", retval);
                         return (retval < 0) ? retval : -EDOM;
                 } else
                         d = (struct usb_qualifier_descriptor *) dev->buf;
@@ -669,8 +652,8 @@ static int ch9_postconfig (struct usbtest_dev *dev)
                                 retval = usb_get_descriptor (udev,
                                         USB_DT_OTHER_SPEED_CONFIG, i,
                                         dev->buf, TBUF_SIZE);
-                                if (!is_good_config (dev->buf, retval)) {
-                                        dev_dbg (&iface->dev,
+                                if (!is_good_config(dev, retval)) {
+                                        dev_err(&iface->dev,
                                                 "other speed config --> %d\n",
                                                 retval);
                                         return (retval < 0) ? retval : -EDOM;
@@ -683,7 +666,7 @@ static int ch9_postconfig (struct usbtest_dev *dev)
         /* [9.4.5] get_status always works */
         retval = usb_get_status (udev, USB_RECIP_DEVICE, 0, dev->buf);
         if (retval != 2) {
-                dev_dbg (&iface->dev, "get dev status --> %d\n", retval);
+                dev_err(&iface->dev, "get dev status --> %d\n", retval);
                 return (retval < 0) ? retval : -EDOM;
         }
 
@@ -693,11 +676,11 @@ static int ch9_postconfig (struct usbtest_dev *dev)
         retval = usb_get_status (udev, USB_RECIP_INTERFACE,
                         iface->altsetting [0].desc.bInterfaceNumber, dev->buf);
         if (retval != 2) {
-                dev_dbg (&iface->dev, "get interface status --> %d\n", retval);
+                dev_err(&iface->dev, "get interface status --> %d\n", retval);
                 return (retval < 0) ? retval : -EDOM;
         }
         // FIXME get status for each endpoint in the interface
-        
+
         return 0;
 }
 
@@ -752,8 +735,9 @@ static void ctrl_complete (struct urb *urb)
          */
         if (subcase->number > 0) {
                 if ((subcase->number - ctx->last) != 1) {
-                        dbg ("subcase %d completed out of order, last %d",
-                                        subcase->number, ctx->last);
+                        ERROR(ctx->dev,
+                                "subcase %d completed out of order, last %d\n",
+                                subcase->number, ctx->last);
                         status = -EDOM;
                         ctx->last = subcase->number;
                         goto error;
@@ -777,7 +761,7 @@ static void ctrl_complete (struct urb *urb)
                 else if (subcase->number == 12 && status == -EPIPE)
                         status = 0;
                 else
-                        dbg ("subtest %d error, status %d",
+                        ERROR(ctx->dev, "subtest %d error, status %d\n",
                                         subcase->number, status);
         }
 
@@ -788,9 +772,12 @@ error:
                         int             i;
 
                         ctx->status = status;
-                        info ("control queue %02x.%02x, err %d, %d left",
+                        ERROR(ctx->dev, "control queue %02x.%02x, err %d, "
+                                        "%d left, subcase %d, len %d/%d\n",
                                         reqp->bRequestType, reqp->bRequest,
-                                        status, ctx->count);
+                                        status, ctx->count, subcase->number,
+                                        urb->actual_length,
+                                        urb->transfer_buffer_length);
 
                         /* FIXME this "unlink everything" exit route should
                          * be a separate test case.
@@ -799,7 +786,8 @@ error:
                         /* unlink whatever's still pending */
                         for (i = 1; i < ctx->param->sglen; i++) {
                                 struct urb      *u = ctx->urb [
-        (i + subcase->number) % ctx->param->sglen];
+                                                (i + subcase->number)
+                                                % ctx->param->sglen];
 
                                 if (u == urb || !u->dev)
                                         continue;
@@ -812,7 +800,8 @@ error:
                                 case -EIDRM:
                                         continue;
                                 default:
-                                        dbg ("urb unlink --> %d", status);
+                                        ERROR(ctx->dev, "urb unlink --> %d\n",
+                                                        status);
                                 }
                         }
                         status = ctx->status;
@@ -822,14 +811,15 @@ error:
         /* resubmit if we need to, else mark this as done */
         if ((status == 0) && (ctx->pending < ctx->count)) {
                 if ((status = usb_submit_urb (urb, GFP_ATOMIC)) != 0) {
-                        dbg ("can't resubmit ctrl %02x.%02x, err %d",
+                        ERROR(ctx->dev,
+                                "can't resubmit ctrl %02x.%02x, err %d\n",
                                 reqp->bRequestType, reqp->bRequest, status);
                         urb->dev = NULL;
                 } else
                         ctx->pending++;
         } else
                 urb->dev = NULL;
-        
+
         /* signal completion when nothing's queued */
         if (ctx->pending == 0)
                 complete (&ctx->complete);
@@ -918,11 +908,11 @@ test_ctrl_queue (struct usbtest_dev *dev, struct usbtest_param *param)
                         req.wValue = cpu_to_le16 (USB_DT_INTERFACE << 8);
                         // interface == 0
                         len = sizeof (struct usb_interface_descriptor);
-                        expected = EPIPE;
+                        expected = -EPIPE;
                         break;
                 // NOTE: two consecutive stalls in the queue here.
                 // that tests fault recovery a bit more aggressively.
-                case 8:         // clear endpoint halt (USUALLY STALLS)
+                case 8:         // clear endpoint halt (MAY STALL)
                         req.bRequest = USB_REQ_CLEAR_FEATURE;
                         req.bRequestType = USB_RECIP_ENDPOINT;
                         // wValue 0 == ep halt
@@ -965,7 +955,7 @@ test_ctrl_queue (struct usbtest_dev *dev, struct usbtest_param *param)
                         break;
                 case 14:        // short read; try to fill the last packet
                         req.wValue = cpu_to_le16 ((USB_DT_DEVICE << 8) | 0);
-                        // device descriptor size == 18 bytes 
+                        /* device descriptor size == 18 bytes */
                         len = udev->descriptor.bMaxPacketSize0;
                         switch (len) {
                         case 8:         len = 24; break;
@@ -974,7 +964,7 @@ test_ctrl_queue (struct usbtest_dev *dev, struct usbtest_param *param)
                         expected = -EREMOTEIO;
                         break;
                 default:
-                        err ("bogus number of ctrl queue testcases!");
+                        ERROR(dev, "bogus number of ctrl queue testcases!\n");
                         context.status = -EINVAL;
                         goto cleanup;
                 }
@@ -1003,7 +993,7 @@ test_ctrl_queue (struct usbtest_dev *dev, struct usbtest_param *param)
         for (i = 0; i < param->sglen; i++) {
                 context.status = usb_submit_urb (urb [i], GFP_ATOMIC);
                 if (context.status != 0) {
-                        dbg ("can't submit urb[%d], status %d",
+                        ERROR(dev, "can't submit urb[%d], status %d\n",
                                         i, context.status);
                         context.count = context.pending;
                         break;
@@ -1070,7 +1060,7 @@ static int unlink1 (struct usbtest_dev *dev, int pipe, int size, int async)
          * due to errors, or is just NAKing requests.
          */
         if ((retval = usb_submit_urb (urb, GFP_KERNEL)) != 0) {
-                dev_dbg (&dev->intf->dev, "submit fail %d\n", retval);
+                dev_err(&dev->intf->dev, "submit fail %d\n", retval);
                 return retval;
         }
 
@@ -1087,13 +1077,13 @@ retry:
                          * "normal" drivers would prevent resubmission, but
                          * since we're testing unlink paths, we can't.
                          */
-                        dev_dbg (&dev->intf->dev, "unlink retry\n");
+                        ERROR(dev,  "unlink retry\n");
                         goto retry;
                 }
         } else
                 usb_kill_urb (urb);
         if (!(retval == 0 || retval == -EINPROGRESS)) {
-                dev_dbg (&dev->intf->dev, "unlink fail %d\n", retval);
+                dev_err(&dev->intf->dev, "unlink fail %d\n", retval);
                 return retval;
         }
 
@@ -1121,7 +1111,7 @@ static int unlink_simple (struct usbtest_dev *dev, int pipe, int len)
 
 /*-------------------------------------------------------------------------*/
 
-static int verify_not_halted (int ep, struct urb *urb)
+static int verify_not_halted(struct usbtest_dev *tdev, int ep, struct urb *urb)
 {
         int     retval;
         u16     status;
@@ -1129,20 +1119,21 @@ static int verify_not_halted (int ep, struct urb *urb)
         /* shouldn't look or act halted */
         retval = usb_get_status (urb->dev, USB_RECIP_ENDPOINT, ep, &status);
         if (retval < 0) {
-                dbg ("ep %02x couldn't get no-halt status, %d", ep, retval);
+                ERROR(tdev, "ep %02x couldn't get no-halt status, %d\n",
+                                ep, retval);
                 return retval;
         }
         if (status != 0) {
-                dbg ("ep %02x bogus status: %04x != 0", ep, status);
+                ERROR(tdev, "ep %02x bogus status: %04x != 0\n", ep, status);
                 return -EINVAL;
         }
-        retval = simple_io (urb, 1, 0, 0, __func__);
+        retval = simple_io(tdev, urb, 1, 0, 0, __func__);
         if (retval != 0)
                 return -EINVAL;
         return 0;
 }
 
-static int verify_halted (int ep, struct urb *urb)
+static int verify_halted(struct usbtest_dev *tdev, int ep, struct urb *urb)
 {
         int     retval;
         u16     status;
@@ -1150,29 +1141,30 @@ static int verify_halted (int ep, struct urb *urb)
         /* should look and act halted */
         retval = usb_get_status (urb->dev, USB_RECIP_ENDPOINT, ep, &status);
         if (retval < 0) {
-                dbg ("ep %02x couldn't get halt status, %d", ep, retval);
+                ERROR(tdev, "ep %02x couldn't get halt status, %d\n",
+                                ep, retval);
                 return retval;
         }
         le16_to_cpus(&status);
         if (status != 1) {
-                dbg ("ep %02x bogus status: %04x != 1", ep, status);
+                ERROR(tdev, "ep %02x bogus status: %04x != 1\n", ep, status);
                 return -EINVAL;
         }
-        retval = simple_io (urb, 1, 0, -EPIPE, __func__);
+        retval = simple_io(tdev, urb, 1, 0, -EPIPE, __func__);
         if (retval != -EPIPE)
                 return -EINVAL;
-        retval = simple_io (urb, 1, 0, -EPIPE, "verify_still_halted");
+        retval = simple_io(tdev, urb, 1, 0, -EPIPE, "verify_still_halted");
         if (retval != -EPIPE)
                 return -EINVAL;
         return 0;
 }
 
-static int test_halt (int ep, struct urb *urb)
+static int test_halt(struct usbtest_dev *tdev, int ep, struct urb *urb)
 {
         int     retval;
 
         /* shouldn't look or act halted now */
-        retval = verify_not_halted (ep, urb);
+        retval = verify_not_halted(tdev, ep, urb);
         if (retval < 0)
                 return retval;
 
@@ -1182,20 +1174,20 @@ static int test_halt (int ep, struct urb *urb)
                         USB_ENDPOINT_HALT, ep,
                         NULL, 0, USB_CTRL_SET_TIMEOUT);
         if (retval < 0) {
-                dbg ("ep %02x couldn't set halt, %d", ep, retval);
+                ERROR(tdev, "ep %02x couldn't set halt, %d\n", ep, retval);
                 return retval;
         }
-        retval = verify_halted (ep, urb);
+        retval = verify_halted(tdev, ep, urb);
         if (retval < 0)
                 return retval;
 
         /* clear halt (tests API + protocol), verify it worked */
         retval = usb_clear_halt (urb->dev, urb->pipe);
         if (retval < 0) {
-                dbg ("ep %02x couldn't clear halt, %d", ep, retval);
+                ERROR(tdev, "ep %02x couldn't clear halt, %d\n", ep, retval);
                 return retval;
         }
-        retval = verify_not_halted (ep, urb);
+        retval = verify_not_halted(tdev, ep, urb);
         if (retval < 0)
                 return retval;
 
@@ -1217,7 +1209,7 @@ static int halt_simple (struct usbtest_dev *dev)
         if (dev->in_pipe) {
                 ep = usb_pipeendpoint (dev->in_pipe) | USB_DIR_IN;
                 urb->pipe = dev->in_pipe;
-                retval = test_halt (ep, urb);
+                retval = test_halt(dev, ep, urb);
                 if (retval < 0)
                         goto done;
         }
@@ -1225,7 +1217,7 @@ static int halt_simple (struct usbtest_dev *dev)
         if (dev->out_pipe) {
                 ep = usb_pipeendpoint (dev->out_pipe);
                 urb->pipe = dev->out_pipe;
-                retval = test_halt (ep, urb);
+                retval = test_halt(dev, ep, urb);
         }
 done:
         simple_free_urb (urb);
@@ -1275,7 +1267,7 @@ static int ctrl_out (struct usbtest_dev *dev,
                 if (retval != len) {
                         what = "write";
                         if (retval >= 0) {
-                                INFO(dev, "ctrl_out, wlen %d (expected %d)\n",
+                                ERROR(dev, "ctrl_out, wlen %d (expected %d)\n",
                                                 retval, len);
                                 retval = -EBADMSG;
                         }
@@ -1289,7 +1281,7 @@ static int ctrl_out (struct usbtest_dev *dev,
                 if (retval != len) {
                         what = "read";
                         if (retval >= 0) {
-                                INFO(dev, "ctrl_out, rlen %d (expected %d)\n",
+                                ERROR(dev, "ctrl_out, rlen %d (expected %d)\n",
                                                 retval, len);
                                 retval = -EBADMSG;
                         }
@@ -1299,7 +1291,7 @@ static int ctrl_out (struct usbtest_dev *dev,
                 /* fail if we can't verify */
                 for (j = 0; j < len; j++) {
                         if (buf [j] != (u8) (i + j)) {
-                                INFO (dev, "ctrl_out, byte %d is %d not %d\n",
+                                ERROR(dev, "ctrl_out, byte %d is %d not %d\n",
                                         j, buf [j], (u8) i + j);
                                 retval = -EBADMSG;
                                 break;
@@ -1321,7 +1313,7 @@ static int ctrl_out (struct usbtest_dev *dev,
         }
 
         if (retval < 0)
-                INFO (dev, "ctrl_out %s failed, code %d, count %d\n",
+                ERROR (dev, "ctrl_out %s failed, code %d, count %d\n",
                         what, retval, i);
 
         kfree (buf);
@@ -1366,7 +1358,7 @@ static void iso_callback (struct urb *urb)
                 case 0:
                         goto done;
                 default:
-                        dev_dbg (&ctx->dev->intf->dev,
+                        dev_err(&ctx->dev->intf->dev,
                                         "iso resubmit err %d\n",
                                         status);
                         /* FALLTHROUGH */
@@ -1381,7 +1373,7 @@ static void iso_callback (struct urb *urb)
         ctx->pending--;
         if (ctx->pending == 0) {
                 if (ctx->errors)
-                        dev_dbg (&ctx->dev->intf->dev,
+                        dev_err(&ctx->dev->intf->dev,
                                 "iso test, %lu errors out of %lu\n",
                                 ctx->errors, ctx->packet_count);
                 complete (&ctx->done);
@@ -1458,7 +1450,7 @@ test_iso_queue (struct usbtest_dev *dev, struct usbtest_param *param,
 
         memset (urbs, 0, sizeof urbs);
         udev = testdev_to_usbdev (dev);
-        dev_dbg (&dev->intf->dev,
+        dev_info(&dev->intf->dev,
                 "... iso period %d %sframes, wMaxPacket %04x\n",
                 1 << (desc->bInterval - 1),
                 (udev->speed == USB_SPEED_HIGH) ? "micro" : "",
@@ -1475,7 +1467,7 @@ test_iso_queue (struct usbtest_dev *dev, struct usbtest_param *param,
                 urbs [i]->context = &context;
         }
         packets *= param->iterations;
-        dev_dbg (&dev->intf->dev,
+        dev_info(&dev->intf->dev,
                 "... total %lu msec (%lu packets)\n",
                 (packets * (1 << (desc->bInterval - 1)))
                         / ((udev->speed == USB_SPEED_HIGH) ? 8 : 1),
@@ -1537,6 +1529,13 @@ fail:
  * except indirectly by consuming USB bandwidth and CPU resources for test
  * threads and request completion.  But the only way to know that for sure
  * is to test when HC queues are in use by many devices.
+ *
+ * WARNING:  Because usbfs grabs udev->dev.sem before calling this ioctl(),
+ * it locks out usbcore in certain code paths.  Notably, if you disconnect
+ * the device-under-test, khubd will wait block forever waiting for the
+ * ioctl to complete ... so that usb_disconnect() can abort the pending
+ * urbs and then call usbtest_disconnect().  To abort a test, you're best
+ * off just killing the userspace task and waiting for it to exit.
  */
 
 static int
@@ -1575,7 +1574,7 @@ usbtest_ioctl (struct usb_interface *intf, unsigned int code, void *buf)
          * altsettings; force a default so most tests don't need to check.
          */
         if (dev->info->alt >= 0) {
-                int     res;
+                int     res;
 
                 if (intf->altsetting->desc.bInterfaceNumber) {
                         mutex_unlock(&dev->lock);
@@ -1604,7 +1603,7 @@ usbtest_ioctl (struct usb_interface *intf, unsigned int code, void *buf)
         switch (param->test_num) {
 
         case 0:
-                dev_dbg (&intf->dev, "TEST 0:  NOP\n");
+                dev_info(&intf->dev, "TEST 0:  NOP\n");
                 retval = 0;
                 break;
 
@@ -1612,7 +1611,7 @@ usbtest_ioctl (struct usb_interface *intf, unsigned int code, void *buf)
         case 1:
                 if (dev->out_pipe == 0)
                         break;
-                dev_dbg (&intf->dev,
+                dev_info(&intf->dev,
                                 "TEST 1:  write %d bytes %u times\n",
                                 param->length, param->iterations);
                 urb = simple_alloc_urb (udev, dev->out_pipe, param->length);
@@ -1621,13 +1620,13 @@ usbtest_ioctl (struct usb_interface *intf, unsigned int code, void *buf)
                         break;
                 }
                 // FIRMWARE:  bulk sink (maybe accepts short writes)
-                retval = simple_io (urb, param->iterations, 0, 0, "test1");
+                retval = simple_io(dev, urb, param->iterations, 0, 0, "test1");
                 simple_free_urb (urb);
                 break;
         case 2:
                 if (dev->in_pipe == 0)
                         break;
-                dev_dbg (&intf->dev,
+                dev_info(&intf->dev,
                                 "TEST 2:  read %d bytes %u times\n",
                                 param->length, param->iterations);
                 urb = simple_alloc_urb (udev, dev->in_pipe, param->length);
@@ -1636,13 +1635,13 @@ usbtest_ioctl (struct usb_interface *intf, unsigned int code, void *buf)
                         break;
                 }
                 // FIRMWARE:  bulk source (maybe generates short writes)
-                retval = simple_io (urb, param->iterations, 0, 0, "test2");
+                retval = simple_io(dev, urb, param->iterations, 0, 0, "test2");
                 simple_free_urb (urb);
                 break;
         case 3:
                 if (dev->out_pipe == 0 || param->vary == 0)
                         break;
-                dev_dbg (&intf->dev,
+                dev_info(&intf->dev,
                                 "TEST 3:  write/%d 0..%d bytes %u times\n",
                                 param->vary, param->length, param->iterations);
                 urb = simple_alloc_urb (udev, dev->out_pipe, param->length);
@@ -1651,14 +1650,14 @@ usbtest_ioctl (struct usb_interface *intf, unsigned int code, void *buf)
                         break;
                 }
                 // FIRMWARE:  bulk sink (maybe accepts short writes)
-                retval = simple_io (urb, param->iterations, param->vary,
+                retval = simple_io(dev, urb, param->iterations, param->vary,
                                         0, "test3");
                 simple_free_urb (urb);
                 break;
         case 4:
                 if (dev->in_pipe == 0 || param->vary == 0)
                         break;
-                dev_dbg (&intf->dev,
+                dev_info(&intf->dev,
                                 "TEST 4:  read/%d 0..%d bytes %u times\n",
                                 param->vary, param->length, param->iterations);
                 urb = simple_alloc_urb (udev, dev->in_pipe, param->length);
@@ -1667,7 +1666,7 @@ usbtest_ioctl (struct usb_interface *intf, unsigned int code, void *buf)
                         break;
                 }
                 // FIRMWARE:  bulk source (maybe generates short writes)
-                retval = simple_io (urb, param->iterations, param->vary,
+                retval = simple_io(dev, urb, param->iterations, param->vary,
                                         0, "test4");
                 simple_free_urb (urb);
                 break;
@@ -1676,7 +1675,7 @@ usbtest_ioctl (struct usb_interface *intf, unsigned int code, void *buf)
         case 5:
                 if (dev->out_pipe == 0 || param->sglen == 0)
                         break;
-                dev_dbg (&intf->dev,
+                dev_info(&intf->dev,
                         "TEST 5:  write %d sglists %d entries of %d bytes\n",
                                 param->iterations,
                                 param->sglen, param->length);
@@ -1686,7 +1685,7 @@ usbtest_ioctl (struct usb_interface *intf, unsigned int code, void *buf)
                         break;
                 }
                 // FIRMWARE:  bulk sink (maybe accepts short writes)
-                retval = perform_sglist (udev, param->iterations, dev->out_pipe,
+                retval = perform_sglist(dev, param->iterations, dev->out_pipe,
                                 &req, sg, param->sglen);
                 free_sglist (sg, param->sglen);
                 break;
@@ -1694,7 +1693,7 @@ usbtest_ioctl (struct usb_interface *intf, unsigned int code, void *buf)
         case 6:
                 if (dev->in_pipe == 0 || param->sglen == 0)
                         break;
-                dev_dbg (&intf->dev,
+                dev_info(&intf->dev,
                         "TEST 6:  read %d sglists %d entries of %d bytes\n",
                                 param->iterations,
                                 param->sglen, param->length);
@@ -1704,14 +1703,14 @@ usbtest_ioctl (struct usb_interface *intf, unsigned int code, void *buf)
                         break;
                 }
                 // FIRMWARE:  bulk source (maybe generates short writes)
-                retval = perform_sglist (udev, param->iterations, dev->in_pipe,
+                retval = perform_sglist(dev, param->iterations, dev->in_pipe,
                                 &req, sg, param->sglen);
                 free_sglist (sg, param->sglen);
                 break;
         case 7:
                 if (dev->out_pipe == 0 || param->sglen == 0 || param->vary == 0)
                         break;
-                dev_dbg (&intf->dev,
+                dev_info(&intf->dev,
                         "TEST 7:  write/%d %d sglists %d entries 0..%d bytes\n",
                                 param->vary, param->iterations,
                                 param->sglen, param->length);
@@ -1721,14 +1720,14 @@ usbtest_ioctl (struct usb_interface *intf, unsigned int code, void *buf)
                         break;
                 }
                 // FIRMWARE:  bulk sink (maybe accepts short writes)
-                retval = perform_sglist (udev, param->iterations, dev->out_pipe,
+                retval = perform_sglist(dev, param->iterations, dev->out_pipe,
                                 &req, sg, param->sglen);
                 free_sglist (sg, param->sglen);
                 break;
         case 8:
                 if (dev->in_pipe == 0 || param->sglen == 0 || param->vary == 0)
                         break;
-                dev_dbg (&intf->dev,
+                dev_info(&intf->dev,
                         "TEST 8:  read/%d %d sglists %d entries 0..%d bytes\n",
                                 param->vary, param->iterations,
                                 param->sglen, param->length);
@@ -1738,7 +1737,7 @@ usbtest_ioctl (struct usb_interface *intf, unsigned int code, void *buf)
                         break;
                 }
                 // FIRMWARE:  bulk source (maybe generates short writes)
-                retval = perform_sglist (udev, param->iterations, dev->in_pipe,
+                retval = perform_sglist(dev, param->iterations, dev->in_pipe,
                                 &req, sg, param->sglen);
                 free_sglist (sg, param->sglen);
                 break;
@@ -1746,13 +1745,14 @@ usbtest_ioctl (struct usb_interface *intf, unsigned int code, void *buf)
         /* non-queued sanity tests for control (chapter 9 subset) */
         case 9:
                 retval = 0;
-                dev_dbg (&intf->dev,
+                dev_info(&intf->dev,
                         "TEST 9:  ch9 (subset) control tests, %d times\n",
                                 param->iterations);
                 for (i = param->iterations; retval == 0 && i--; /* NOP */)
                         retval = ch9_postconfig (dev);
                 if (retval)
-                        dbg ("ch9 subset failed, iterations left %d", i);
+                        dev_err(&intf->dev, "ch9 subset failed, "
+                                        "iterations left %d\n", i);
                 break;
 
         /* queued control messaging */
@@ -1760,7 +1760,7 @@ usbtest_ioctl (struct usb_interface *intf, unsigned int code, void *buf)
                 if (param->sglen == 0)
                         break;
                 retval = 0;
-                dev_dbg (&intf->dev,
+                dev_info(&intf->dev,
                                 "TEST 10:  queue %d control calls, %d times\n",
                                 param->sglen,
                                 param->iterations);
@@ -1772,26 +1772,26 @@ usbtest_ioctl (struct usb_interface *intf, unsigned int code, void *buf)
                 if (dev->in_pipe == 0 || !param->length)
                         break;
                 retval = 0;
-                dev_dbg (&intf->dev, "TEST 11:  unlink %d reads of %d\n",
+                dev_info(&intf->dev, "TEST 11:  unlink %d reads of %d\n",
                                 param->iterations, param->length);
                 for (i = param->iterations; retval == 0 && i--; /* NOP */)
                         retval = unlink_simple (dev, dev->in_pipe,
                                                 param->length);
                 if (retval)
-                        dev_dbg (&intf->dev, "unlink reads failed %d, "
+                        dev_err(&intf->dev, "unlink reads failed %d, "
                                 "iterations left %d\n", retval, i);
                 break;
         case 12:
                 if (dev->out_pipe == 0 || !param->length)
                         break;
                 retval = 0;
-                dev_dbg (&intf->dev, "TEST 12:  unlink %d writes of %d\n",
+                dev_info(&intf->dev, "TEST 12:  unlink %d writes of %d\n",
                                 param->iterations, param->length);
                 for (i = param->iterations; retval == 0 && i--; /* NOP */)
                         retval = unlink_simple (dev, dev->out_pipe,
                                                 param->length);
                 if (retval)
-                        dev_dbg (&intf->dev, "unlink writes failed %d, "
+                        dev_err(&intf->dev, "unlink writes failed %d, "
                                 "iterations left %d\n", retval, i);
                 break;
 
@@ -1800,24 +1800,24 @@ usbtest_ioctl (struct usb_interface *intf, unsigned int code, void *buf)
                 if (dev->out_pipe == 0 && dev->in_pipe == 0)
                         break;
                 retval = 0;
-                dev_dbg (&intf->dev, "TEST 13:  set/clear %d halts\n",
+                dev_info(&intf->dev, "TEST 13:  set/clear %d halts\n",
                                 param->iterations);
                 for (i = param->iterations; retval == 0 && i--; /* NOP */)
                         retval = halt_simple (dev);
-                
+
                 if (retval)
-                        DBG (dev, "halts failed, iterations left %d\n", i);
+                        ERROR(dev, "halts failed, iterations left %d\n", i);
                 break;
 
         /* control write tests */
         case 14:
                 if (!dev->info->ctrl_out)
                         break;
-                dev_dbg (&intf->dev, "TEST 14:  %d ep0out, %d..%d vary %d\n",
+                dev_info(&intf->dev, "TEST 14:  %d ep0out, %d..%d vary %d\n",
                                 param->iterations,
                                 realworld ? 1 : 0, param->length,
                                 param->vary);
-                retval = ctrl_out (dev, param->iterations, 
+                retval = ctrl_out(dev, param->iterations,
                                 param->length, param->vary);
                 break;
 
@@ -1825,7 +1825,7 @@ usbtest_ioctl (struct usb_interface *intf, unsigned int code, void *buf)
         case 15:
                 if (dev->out_iso_pipe == 0 || param->sglen == 0)
                         break;
-                dev_dbg (&intf->dev, 
+                dev_info(&intf->dev,
                         "TEST 15:  write %d iso, %d entries of %d bytes\n",
                                 param->iterations,
                                 param->sglen, param->length);
@@ -1838,7 +1838,7 @@ usbtest_ioctl (struct usb_interface *intf, unsigned int code, void *buf)
         case 16:
                 if (dev->in_iso_pipe == 0 || param->sglen == 0)
                         break;
-                dev_dbg (&intf->dev,
+                dev_info(&intf->dev,
                         "TEST 16:  read %d iso, %d entries of %d bytes\n",
                                 param->iterations,
                                 param->sglen, param->length);
@@ -1898,7 +1898,8 @@ usbtest_probe (struct usb_interface *intf, const struct usb_device_id *id)
                         return -ENODEV;
                 if (product && le16_to_cpu(udev->descriptor.idProduct) != (u16)product)
                         return -ENODEV;
-                dbg ("matched module params, vend=0x%04x prod=0x%04x",
+                dev_info(&intf->dev, "matched module params, "
+                                        "vend=0x%04x prod=0x%04x\n",
                                 le16_to_cpu(udev->descriptor.idVendor),
                                 le16_to_cpu(udev->descriptor.idProduct));
         }
@@ -1940,7 +1941,8 @@ usbtest_probe (struct usb_interface *intf, const struct usb_device_id *id)
 
                         status = get_endpoints (dev, intf);
                         if (status < 0) {
-                                dbg ("couldn't get endpoints, %d\n", status);
+                                WARN(dev, "couldn't get endpoints, %d\n",
+                                                status);
                                 return status;
                         }
                         /* may find bulk or ISO pipes */
@@ -2082,21 +2084,9 @@ static struct usbtest_info generic_info = {
 };
 #endif
 
-// FIXME remove this 
-static struct usbtest_info hact_info = {
-        .name           = "FX2/hact",
-        //.ep_in                = 6,
-        .ep_out         = 2,
-        .alt            = -1,
-};
-
 
 static struct usb_device_id id_table [] = {
 
-        { USB_DEVICE (0x0547, 0x1002),
-                .driver_info = (unsigned long) &hact_info,
-                },
-
         /*-------------------------------------------------------------*/
 
         /* EZ-USB devices which download firmware to replace (or in our
@@ -2185,7 +2175,7 @@ static int __init usbtest_init (void)
 {
 #ifdef GENERIC
         if (vendor)
-                dbg ("params: vend=0x%04x prod=0x%04x", vendor, product);
+                pr_debug("params: vend=0x%04x prod=0x%04x\n", vendor, product);
 #endif
         return usb_register (&usbtest_driver);
 }
diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c
index 9b1bb347dc2d..db6f97a93c02 100644
--- a/drivers/usb/serial/aircable.c
+++ b/drivers/usb/serial/aircable.c
@@ -147,7 +147,7 @@ static void serial_buf_free(struct circ_buf *cb)
  */
 static int serial_buf_data_avail(struct circ_buf *cb)
 {
-        return CIRC_CNT(cb->head,cb->tail,AIRCABLE_BUF_SIZE);
+        return CIRC_CNT(cb->head, cb->tail, AIRCABLE_BUF_SIZE);
 }
 
 /*
@@ -171,7 +171,7 @@ static int serial_buf_put(struct circ_buf *cb, const char *buf, int count)
                 cb->head = (cb->head + c) & (AIRCABLE_BUF_SIZE-1);
                 buf += c;
                 count -= c;
-                ret= c;
+                ret = c;
         }
         return ret;
 }
@@ -197,7 +197,7 @@ static int serial_buf_get(struct circ_buf *cb, char *buf, int count)
                 cb->tail = (cb->tail + c) & (AIRCABLE_BUF_SIZE-1);
                 buf += c;
                 count -= c;
-                ret= c;
+                ret = c;
         }
         return ret;
 }
@@ -208,7 +208,7 @@ static void aircable_send(struct usb_serial_port *port)
 {
         int count, result;
         struct aircable_private *priv = usb_get_serial_port_data(port);
-        unsigned char* buf;
+        unsigned char *buf;
         __le16 *dbuf;
         dbg("%s - port %d", __func__, port->number);
         if (port->write_urb_busy)
@@ -229,7 +229,8 @@ static void aircable_send(struct usb_serial_port *port)
         buf[1] = TX_HEADER_1;
         dbuf = (__le16 *)&buf[2];
         *dbuf = cpu_to_le16((u16)count);
-        serial_buf_get(priv->tx_buf,buf + HCI_HEADER_LENGTH, MAX_HCI_FRAMESIZE);
+        serial_buf_get(priv->tx_buf, buf + HCI_HEADER_LENGTH,
+                                                        MAX_HCI_FRAMESIZE);
 
         memcpy(port->write_urb->transfer_buffer, buf,
                count + HCI_HEADER_LENGTH);
@@ -261,7 +262,7 @@ static void aircable_read(struct work_struct *work)
         struct tty_struct *tty;
         unsigned char *data;
         int count;
-        if (priv->rx_flags & THROTTLED){
+        if (priv->rx_flags & THROTTLED) {
                 if (priv->rx_flags & ACTUALLY_THROTTLED)
                         schedule_work(&priv->rx_work);
                 return;
@@ -282,10 +283,10 @@ static void aircable_read(struct work_struct *work)
         count = min(64, serial_buf_data_avail(priv->rx_buf));
 
         if (count <= 0)
-                return; //We have finished sending everything.
+                return; /* We have finished sending everything. */
 
         tty_prepare_flip_string(tty, &data, count);
-        if (!data){
+        if (!data) {
                 err("%s- kzalloc(%d) failed.", __func__, count);
                 return;
         }
@@ -304,9 +305,10 @@ static void aircable_read(struct work_struct *work)
 static int aircable_probe(struct usb_serial *serial,
                           const struct usb_device_id *id)
 {
-        struct usb_host_interface *iface_desc = serial->interface->cur_altsetting;
+        struct usb_host_interface *iface_desc = serial->interface->
+                                                                cur_altsetting;
         struct usb_endpoint_descriptor *endpoint;
-        int num_bulk_out=0;
+        int num_bulk_out = 0;
         int i;
 
         for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) {
@@ -325,13 +327,13 @@ static int aircable_probe(struct usb_serial *serial,
         return 0;
 }
 
-static int aircable_attach (struct usb_serial *serial)
+static int aircable_attach(struct usb_serial *serial)
 {
         struct usb_serial_port *port = serial->port[0];
         struct aircable_private *priv;
 
         priv = kzalloc(sizeof(struct aircable_private), GFP_KERNEL);
-        if (!priv){
+        if (!priv) {
                 err("%s- kmalloc(%Zd) failed.", __func__,
                         sizeof(struct aircable_private));
                 return -ENOMEM;
@@ -392,7 +394,7 @@ static int aircable_write(struct usb_serial_port *port,
 
         usb_serial_debug_data(debug, &port->dev, __func__, count, source);
 
-        if (!count){
+        if (!count) {
                 dbg("%s - write request of 0 bytes", __func__);
                 return count;
         }
@@ -418,31 +420,31 @@ static void aircable_write_bulk_callback(struct urb *urb)
 
         /* This has been taken from cypress_m8.c cypress_write_int_callback */
         switch (status) {
-                case 0:
-                        /* success */
-                        break;
-                case -ECONNRESET:
-                case -ENOENT:
-                case -ESHUTDOWN:
-                        /* this urb is terminated, clean up */
-                        dbg("%s - urb shutting down with status: %d",
-                            __func__, status);
-                        port->write_urb_busy = 0;
+        case 0:
+                /* success */
+                break;
+        case -ECONNRESET:
+        case -ENOENT:
+        case -ESHUTDOWN:
+                /* this urb is terminated, clean up */
+                dbg("%s - urb shutting down with status: %d",
+                    __func__, status);
+                port->write_urb_busy = 0;
+                return;
+        default:
+                /* error in the urb, so we have to resubmit it */
+                dbg("%s - Overflow in write", __func__);
+                dbg("%s - nonzero write bulk status received: %d",
+                    __func__, status);
+                port->write_urb->transfer_buffer_length = 1;
+                port->write_urb->dev = port->serial->dev;
+                result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
+                if (result)
+                        dev_err(&urb->dev->dev,
+                            "%s - failed resubmitting write urb, error %d\n",
+                                                        __func__, result);
+                else
                         return;
-                default:
-                        /* error in the urb, so we have to resubmit it */
-                        dbg("%s - Overflow in write", __func__);
-                        dbg("%s - nonzero write bulk status received: %d",
-                            __func__, status);
-                        port->write_urb->transfer_buffer_length = 1;
-                        port->write_urb->dev = port->serial->dev;
-                        result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
-                        if (result)
-                                dev_err(&urb->dev->dev,
-                                        "%s - failed resubmitting write urb, error %d\n",
-                                        __func__, result);
-                        else
-                                return;
         }
 
         port->write_urb_busy = 0;
@@ -472,11 +474,11 @@ static void aircable_read_bulk_callback(struct urb *urb)
                         dbg("%s - caught -EPROTO, resubmitting the urb",
                             __func__);
                         usb_fill_bulk_urb(port->read_urb, port->serial->dev,
-                                          usb_rcvbulkpipe(port->serial->dev,
-                                                          port->bulk_in_endpointAddress),
-                                          port->read_urb->transfer_buffer,
-                                          port->read_urb->transfer_buffer_length,
-                                          aircable_read_bulk_callback, port);
+                                usb_rcvbulkpipe(port->serial->dev,
+                                        port->bulk_in_endpointAddress),
+                                port->read_urb->transfer_buffer,
+                                port->read_urb->transfer_buffer_length,
+                                aircable_read_bulk_callback, port);
 
                         result = usb_submit_urb(urb, GFP_ATOMIC);
                         if (result)
@@ -490,7 +492,7 @@ static void aircable_read_bulk_callback(struct urb *urb)
         }
 
         usb_serial_debug_data(debug, &port->dev, __func__,
-                                urb->actual_length,urb->transfer_buffer);
+                                urb->actual_length, urb->transfer_buffer);
 
         tty = port->tty;
         if (tty && urb->actual_length) {
@@ -507,9 +509,9 @@ static void aircable_read_bulk_callback(struct urb *urb)
                         no_packages = urb->actual_length / (HCI_COMPLETE_FRAME);
 
                         if (urb->actual_length % HCI_COMPLETE_FRAME != 0)
-                                no_packages+=1;
+                                no_packages++;
 
-                        for (i = 0; i < no_packages ;i++) {
+                        for (i = 0; i < no_packages; i++) {
                                 if (remaining > (HCI_COMPLETE_FRAME))
                                         package_length = HCI_COMPLETE_FRAME;
                                 else
@@ -529,7 +531,7 @@ static void aircable_read_bulk_callback(struct urb *urb)
         if (port->open_count) {
                 usb_fill_bulk_urb(port->read_urb, port->serial->dev,
                                   usb_rcvbulkpipe(port->serial->dev,
-                                                  port->bulk_in_endpointAddress),
+                                          port->bulk_in_endpointAddress),
                                   port->read_urb->transfer_buffer,
                                   port->read_urb->transfer_buffer_length,
                                   aircable_read_bulk_callback, port);
@@ -602,7 +604,7 @@ static struct usb_serial_driver aircable_device = {
         .unthrottle =           aircable_unthrottle,
 };
 
-static int __init aircable_init (void)
+static int __init aircable_init(void)
 {
         int retval;
         retval = usb_serial_register(&aircable_device);
@@ -619,7 +621,7 @@ failed_usb_register:
         return retval;
 }
 
-static void __exit aircable_exit (void)
+static void __exit aircable_exit(void)
 {
         usb_deregister(&aircable_driver);
         usb_serial_deregister(&aircable_device);
diff --git a/drivers/usb/serial/airprime.c b/drivers/usb/serial/airprime.c
index 725b6b94c274..0798c14ce787 100644
--- a/drivers/usb/serial/airprime.c
+++ b/drivers/usb/serial/airprime.c
@@ -68,8 +68,9 @@ static int airprime_send_setup(struct usb_serial_port *port)
                         val |= 0x02;
 
                 return usb_control_msg(serial->dev,
-                                usb_rcvctrlpipe(serial->dev, 0),
-                                0x22,0x21,val,0,NULL,0,USB_CTRL_SET_TIMEOUT);
+                                        usb_rcvctrlpipe(serial->dev, 0),
+                                        0x22, 0x21, val, 0, NULL, 0,
+                                        USB_CTRL_SET_TIMEOUT);
         }
 
         return 0;
@@ -90,17 +91,19 @@ static void airprime_read_bulk_callback(struct urb *urb)
                     __func__, status);
                 return;
         }
-        usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data);
+        usb_serial_debug_data(debug, &port->dev, __func__,
+                                                urb->actual_length, data);
 
         tty = port->tty;
         if (tty && urb->actual_length) {
-                tty_insert_flip_string (tty, data, urb->actual_length);
-                tty_flip_buffer_push (tty);
+                tty_insert_flip_string(tty, data, urb->actual_length);
+                tty_flip_buffer_push(tty);
         }
 
-        result = usb_submit_urb (urb, GFP_ATOMIC);
+        result = usb_submit_urb(urb, GFP_ATOMIC);
         if (result)
-                dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n",
+                dev_err(&port->dev,
+                        "%s - failed resubmitting read urb, error %d\n",
                         __func__, result);
         return;
 }
@@ -115,7 +118,7 @@ static void airprime_write_bulk_callback(struct urb *urb)
         dbg("%s - port %d", __func__, port->number);
 
         /* free up the transfer buffer, as usb_free_urb() does not do this */
-        kfree (urb->transfer_buffer);
+        kfree(urb->transfer_buffer);
 
         if (status)
                 dbg("%s - nonzero write bulk status received: %d",
@@ -171,7 +174,7 @@ static int airprime_open(struct usb_serial_port *port, struct file *filp)
                 }
                 usb_fill_bulk_urb(urb, serial->dev,
                                   usb_rcvbulkpipe(serial->dev,
-                                                  port->bulk_out_endpointAddress),
+                                          port->bulk_out_endpointAddress),
                                   buffer, buffer_size,
                                   airprime_read_bulk_callback, port);
                 result = usb_submit_urb(urb, GFP_KERNEL);
@@ -183,7 +186,8 @@ static int airprime_open(struct usb_serial_port *port, struct file *filp)
                                 __func__, i, port->number, result);
                         goto errout;
                 }
-                /* remember this urb so we can kill it when the port is closed */
+                /* remember this urb so we can kill it when the
+                   port is closed */
                 priv->read_urbp[i] = urb;
         }
 
@@ -192,22 +196,22 @@ static int airprime_open(struct usb_serial_port *port, struct file *filp)
         goto out;
 
  errout:
-        /* some error happened, cancel any submitted urbs and clean up anything that
-           got allocated successfully */
+        /* some error happened, cancel any submitted urbs and clean up
+           anything that got allocated successfully */
 
         while (i-- != 0) {
                 urb = priv->read_urbp[i];
                 buffer = urb->transfer_buffer;
-                usb_kill_urb (urb);
-                usb_free_urb (urb);
-                kfree (buffer);
+                usb_kill_urb(urb);
+                usb_free_urb(urb);
+                kfree(buffer);
         }
 
  out:
         return result;
 }
 
-static void airprime_close(struct usb_serial_port *port, struct file * filp)
+static void airprime_close(struct usb_serial_port *port, struct file *filp)
 {
         struct airprime_private *priv = usb_get_serial_port_data(port);
         int i;
@@ -220,16 +224,16 @@ static void airprime_close(struct usb_serial_port *port, struct file * filp)
         mutex_lock(&port->serial->disc_mutex);
         if (!port->serial->disconnected)
                 airprime_send_setup(port);
-        mutex_lock(&port->serial->disc_mutex);
+        mutex_unlock(&port->serial->disc_mutex);
 
         for (i = 0; i < NUM_READ_URBS; ++i) {
-                usb_kill_urb (priv->read_urbp[i]);
-                kfree (priv->read_urbp[i]->transfer_buffer);
-                usb_free_urb (priv->read_urbp[i]);
+                usb_kill_urb(priv->read_urbp[i]);
+                kfree(priv->read_urbp[i]->transfer_buffer);
+                usb_free_urb(priv->read_urbp[i]);
         }
 
         /* free up private structure */
-        kfree (priv);
+        kfree(priv);
         usb_set_serial_port_data(port, NULL);
 }
 
@@ -259,10 +263,10 @@ static int airprime_write(struct usb_serial_port *port,
         urb = usb_alloc_urb(0, GFP_ATOMIC);
         if (!urb) {
                 dev_err(&port->dev, "no more free urbs\n");
-                kfree (buffer);
+                kfree(buffer);
                 return -ENOMEM;
         }
-        memcpy (buffer, buf, count);
+        memcpy(buffer, buf, count);
 
         usb_serial_debug_data(debug, &port->dev, __func__, count, buffer);
 
@@ -279,7 +283,7 @@ static int airprime_write(struct usb_serial_port *port,
                         "%s - usb_submit_urb(write bulk) failed with status = %d\n",
                         __func__, status);
                 count = status;
-                kfree (buffer);
+                kfree(buffer);
         } else {
                 spin_lock_irqsave(&priv->lock, flags);
                 ++priv->outstanding_urbs;
@@ -287,7 +291,7 @@ static int airprime_write(struct usb_serial_port *port,
         }
         /* we are done with this urb, so let the host driver
          * really free it when it is finished with it */
-        usb_free_urb (urb);
+        usb_free_urb(urb);
         return count;
 }
 
@@ -315,8 +319,10 @@ static int __init airprime_init(void)
 {
         int retval;
 
-        airprime_device.num_ports =
-                (endpoints > 0 && endpoints <= MAX_BULK_EPS) ? endpoints : NUM_BULK_EPS;
+        airprime_device.num_ports = endpoints;
+        if (endpoints < 0 || endpoints >= MAX_BULK_EPS)
+                airprime_device.num_ports = NUM_BULK_EPS;
+
         retval = usb_serial_register(&airprime_device);
         if (retval)
                 return retval;
@@ -341,6 +347,7 @@ MODULE_LICENSE("GPL");
 module_param(debug, bool, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(debug, "Debug enabled");
 module_param(buffer_size, int, 0);
-MODULE_PARM_DESC(buffer_size, "Size of the transfer buffers in bytes (default 4096)");
+MODULE_PARM_DESC(buffer_size,
+                "Size of the transfer buffers in bytes (default 4096)");
 module_param(endpoints, int, 0);
 MODULE_PARM_DESC(endpoints, "Number of bulk EPs to configure (default 3)");
diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index 599ab2e548a7..77895c8f8f31 100644
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -24,7 +24,7 @@
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
 #include <linux/serial.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 
 
 static int debug;
@@ -246,29 +246,29 @@ static void ark3116_set_termios(struct usb_serial_port *port,
         baud = tty_get_baud_rate(port->tty);
 
         switch (baud) {
-                case 75:
-                case 150:
-                case 300:
-                case 600:
-                case 1200:
-                case 1800:
-                case 2400:
-                case 4800:
-                case 9600:
-                case 19200:
-                case 38400:
-                case 57600:
-                case 115200:
-                case 230400:
-                case 460800:
-                        /* Report the resulting rate back to the caller */
-                        tty_encode_baud_rate(port->tty, baud, baud);
-                        break;
-                /* set 9600 as default (if given baudrate is invalid for example) */
-                default:
-                        tty_encode_baud_rate(port->tty, 9600, 9600);
-                case 0:
-                        baud = 9600;
+        case 75:
+        case 150:
+        case 300:
+        case 600:
+        case 1200:
+        case 1800:
+        case 2400:
+        case 4800:
+        case 9600:
+        case 19200:
+        case 38400:
+        case 57600:
+        case 115200:
+        case 230400:
+        case 460800:
+                /* Report the resulting rate back to the caller */
+                tty_encode_baud_rate(port->tty, baud, baud);
+                break;
+        /* set 9600 as default (if given baudrate is invalid for example) */
+        default:
+                tty_encode_baud_rate(port->tty, 9600, 9600);
+        case 0:
+                baud = 9600;
         }
 
         /*
@@ -380,19 +380,19 @@ static int ark3116_ioctl(struct usb_serial_port *port, struct file *file,
         switch (cmd) {
         case TIOCGSERIAL:
                 /* XXX: Some of these values are probably wrong. */
-                memset(&serstruct, 0, sizeof (serstruct));
+                memset(&serstruct, 0, sizeof(serstruct));
                 serstruct.type = PORT_16654;
                 serstruct.line = port->serial->minor;
                 serstruct.port = port->number;
                 serstruct.custom_divisor = 0;
                 serstruct.baud_base = 460800;
 
-                if (copy_to_user(user_arg, &serstruct, sizeof (serstruct)))
+                if (copy_to_user(user_arg, &serstruct, sizeof(serstruct)))
                         return -EFAULT;
 
                 return 0;
         case TIOCSSERIAL:
-                if (copy_from_user(&serstruct, user_arg, sizeof (serstruct)))
+                if (copy_from_user(&serstruct, user_arg, sizeof(serstruct)))
                         return -EFAULT;
                 return 0;
         default:
diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index d947d955bceb..ba28fdc9ccd2 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -130,7 +130,7 @@ static int ch341_get_status(struct usb_device *dev)
                 return -ENOMEM;
 
         r = ch341_control_in(dev, 0x95, 0x0706, 0, buffer, size);
-        if ( r < 0)
+        if (r < 0)
                 goto out;
 
         /* Not having the datasheet for the CH341, we ignore the bytes returned
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index c7329f43d9c9..5b349ece7247 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -133,6 +133,14 @@ static struct ftdi_sio_quirk ftdi_HE_TIRA1_quirk = {
 static struct usb_device_id id_table_combined [] = {
         { USB_DEVICE(FTDI_VID, FTDI_AMC232_PID) },
         { USB_DEVICE(FTDI_VID, FTDI_CANUSB_PID) },
+        { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_0_PID) },
+        { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_1_PID) },
+        { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_2_PID) },
+        { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_3_PID) },
+        { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_4_PID) },
+        { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_5_PID) },
+        { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_6_PID) },
+        { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_7_PID) },
         { USB_DEVICE(FTDI_VID, FTDI_ACTZWAVE_PID) },
         { USB_DEVICE(FTDI_VID, FTDI_IRTRANS_PID) },
         { USB_DEVICE(FTDI_VID, FTDI_IPLUS_PID) },
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 6da539ede0ee..504edf8c3a3f 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -40,6 +40,17 @@
 /* AlphaMicro Components AMC-232USB01 device */
 #define FTDI_AMC232_PID 0xFF00 /* Product Id */
 
+/* SCS HF Radio Modems PID's (http://www.scs-ptc.com) */
+/* the VID is the standard ftdi vid (FTDI_VID) */
+#define FTDI_SCS_DEVICE_0_PID 0xD010    /* SCS PTC-IIusb */
+#define FTDI_SCS_DEVICE_1_PID 0xD011    /* SCS Tracker / DSP TNC */
+#define FTDI_SCS_DEVICE_2_PID 0xD012
+#define FTDI_SCS_DEVICE_3_PID 0xD013
+#define FTDI_SCS_DEVICE_4_PID 0xD014
+#define FTDI_SCS_DEVICE_5_PID 0xD015
+#define FTDI_SCS_DEVICE_6_PID 0xD016
+#define FTDI_SCS_DEVICE_7_PID 0xD017
+
 /* ACT Solutions HomePro ZWave interface (http://www.act-solutions.com/HomePro.htm) */
 #define FTDI_ACTZWAVE_PID       0xF2D0
 
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 6bcb82d3911a..78f2f6db494d 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -1713,7 +1713,7 @@ static int mos7840_tiocmset(struct usb_serial_port *port, struct file *file,
 {
         struct moschip_port *mos7840_port;
         unsigned int mcr;
-        unsigned int status;
+        int status;
 
         dbg("%s - port %d", __func__, port->number);
 
@@ -1740,11 +1740,10 @@ static int mos7840_tiocmset(struct usb_serial_port *port, struct file *file,
 
         mos7840_port->shadowMCR = mcr;
 
-        status = 0;
         status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, mcr);
         if (status < 0) {
                 dbg("setting MODEM_CONTROL_REGISTER Failed\n");
-                return -1;
+                return status;
         }
 
         return 0;
diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig
index 0f6d234d699b..3d9249632ae1 100644
--- a/drivers/usb/storage/Kconfig
+++ b/drivers/usb/storage/Kconfig
@@ -123,7 +123,8 @@ config USB_STORAGE_ALAUDA
 
 config USB_STORAGE_ONETOUCH
         bool "Support OneTouch Button on Maxtor Hard Drives"
-        depends on USB_STORAGE && INPUT_EVDEV
+        depends on USB_STORAGE
+        depends on INPUT=y || INPUT=USB_STORAGE
         help
           Say Y here to include additional code to support the Maxtor OneTouch
           USB hard drive's onetouch button.
diff --git a/drivers/usb/storage/cypress_atacb.c b/drivers/usb/storage/cypress_atacb.c
index d88824b3511c..898e67d30e56 100644
--- a/drivers/usb/storage/cypress_atacb.c
+++ b/drivers/usb/storage/cypress_atacb.c
@@ -46,7 +46,7 @@ void cypress_atacb_passthrough(struct scsi_cmnd *srb, struct us_data *us)
         }
 
         memcpy(save_cmnd, srb->cmnd, sizeof(save_cmnd));
-        memset(srb->cmnd, 0, sizeof(srb->cmnd));
+        memset(srb->cmnd, 0, MAX_COMMAND_SIZE);
 
         /* check if we support the command */
         if (save_cmnd[1] >> 5) /* MULTIPLE_COUNT */
diff --git a/drivers/usb/storage/isd200.c b/drivers/usb/storage/isd200.c
index 971d13dd5e65..3addcd8f827b 100644
--- a/drivers/usb/storage/isd200.c
+++ b/drivers/usb/storage/isd200.c
@@ -292,6 +292,7 @@ struct isd200_info {
 
         /* maximum number of LUNs supported */
         unsigned char MaxLUNs;
+        unsigned char cmnd[BLK_MAX_CDB];
         struct scsi_cmnd srb;
         struct scatterlist sg;
 };
@@ -450,6 +451,7 @@ static int isd200_action( struct us_data *us, int action,
 
         memset(&ata, 0, sizeof(ata));
         memset(&srb_dev, 0, sizeof(srb_dev));
+        srb->cmnd = info->cmnd;
         srb->device = &srb_dev;
         ++srb->serial_number;
 
diff --git a/drivers/usb/storage/libusual.c b/drivers/usb/storage/libusual.c
index a28d49122e7a..d617e8ae6b00 100644
--- a/drivers/usb/storage/libusual.c
+++ b/drivers/usb/storage/libusual.c
@@ -135,7 +135,7 @@ static int usu_probe(struct usb_interface *intf,
         stat[type].fls |= USU_MOD_FL_THREAD;
         spin_unlock_irqrestore(&usu_lock, flags);
 
-        task = kthread_run(usu_probe_thread, (void*)type, "libusual_%d", type);
+        task = kthread_run(usu_probe_thread, (void*)type, "libusual_%ld", type);
         if (IS_ERR(task)) {
                 rc = PTR_ERR(task);
                 printk(KERN_WARNING "libusual: "
diff --git a/drivers/usb/storage/onetouch.c b/drivers/usb/storage/onetouch.c
index dfd42fe9e5f0..98b89ea9e312 100644
--- a/drivers/usb/storage/onetouch.c
+++ b/drivers/usb/storage/onetouch.c
@@ -38,7 +38,7 @@
 #include "onetouch.h"
 #include "debug.h"
 
-void onetouch_release_input(void *onetouch_);
+static void onetouch_release_input(void *onetouch_);
 
 struct usb_onetouch {
         char name[128];
@@ -223,7 +223,7 @@ int onetouch_connect_input(struct us_data *ss)
         return error;
 }
 
-void onetouch_release_input(void *onetouch_)
+static void onetouch_release_input(void *onetouch_)
 {
         struct usb_onetouch *onetouch = (struct usb_onetouch *) onetouch_;
 
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 732bf52a775e..a0ed889230aa 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -44,7 +44,8 @@
  *        running with this patch.
  * Send your submission to either Phil Dibowitz <phil@ipom.com> or
  * Alan Stern <stern@rowland.harvard.edu>, and don't forget to CC: the
- * USB development list <linux-usb-devel@lists.sourceforge.net>.
+ * USB development list <linux-usb@vger.kernel.org> and the USB storage list
+ * <usb-storage@lists.one-eyed-alien.net>
  */
 
 /* patch submitted by Vivian Bregier <Vivian.Bregier@imag.fr>
@@ -557,6 +558,13 @@ UNUSUAL_DEV(  0x04e6, 0x1010, 0x0000, 0x9999,
                 US_FL_SINGLE_LUN),
 #endif
 
+/* Reported by Dmitry Khlystov <adminimus@gmail.com> */
+UNUSUAL_DEV(  0x04e8, 0x507c, 0x0220, 0x0220,
+                "Samsung",
+                "YP-U3",
+                US_SC_DEVICE, US_PR_DEVICE, NULL,
+                US_FL_MAX_SECTORS_64),
+
 /* Reported by Bob Sass <rls@vectordb.com> -- only rev 1.33 tested */
 UNUSUAL_DEV(  0x050d, 0x0115, 0x0133, 0x0133,
                 "Belkin",
@@ -1200,6 +1208,17 @@ UNUSUAL_DEV(  0x084d, 0x0011, 0x0110, 0x0110,
                 US_SC_DEVICE, US_PR_DEVICE, NULL,
                 US_FL_BULK32),
 
+/* Andrew Lunn <andrew@lunn.ch>
+ * PanDigital Digital Picture Frame. Does not like ALLOW_MEDIUM_REMOVAL
+ * on LUN 4.
+ * Note: Vend:Prod clash with "Ltd Maxell WS30 Slim Digital Camera"
+*/
+UNUSUAL_DEV(  0x0851, 0x1543, 0x0200, 0x0200,
+                "PanDigital",
+                "Photo Frame",
+                US_SC_DEVICE, US_PR_DEVICE, NULL,
+                US_FL_NOT_LOCKABLE),
+
 /* Submitted by Jan De Luyck <lkml@kcore.org> */
 UNUSUAL_DEV(  0x08bd, 0x1100, 0x0000, 0x0000,
                 "CITIZEN",
@@ -1342,6 +1361,13 @@ UNUSUAL_DEV( 0x0d96, 0x410a, 0x0001, 0xffff,
                 US_SC_DEVICE, US_PR_DEVICE, NULL,
                 US_FL_FIX_INQUIRY),
 
+/* Reported by Rohan Hart <rohan.hart17@gmail.com> */
+UNUSUAL_DEV(  0x2770, 0x915d, 0x0010, 0x0010,
+                "INTOVA",
+                "Pixtreme",
+                US_SC_DEVICE, US_PR_DEVICE, NULL,
+                US_FL_FIX_CAPACITY ),
+
 /*
  * Entry for Jenoptik JD 5200z3
  *
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index a856effad3bd..e268aacb773a 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -539,7 +539,8 @@ static int get_device_info(struct us_data *us, const struct usb_device_id *id)
                                 " has %s in unusual_devs.h (kernel"
                                 " %s)\n"
                                 "   Please send a copy of this message to "
-                                "<linux-usb-devel@lists.sourceforge.net>\n",
+                                "<linux-usb@vger.kernel.org> and "
+                                "<usb-storage@lists.one-eyed-alien.net>\n",
                                 le16_to_cpu(ddesc->idVendor),
                                 le16_to_cpu(ddesc->idProduct),
                                 le16_to_cpu(ddesc->bcdDevice),
diff --git a/drivers/virtio/virtio.c b/drivers/virtio/virtio.c
index b535483bc556..13866789b356 100644
--- a/drivers/virtio/virtio.c
+++ b/drivers/virtio/virtio.c
@@ -80,19 +80,51 @@ static void add_status(struct virtio_device *dev, unsigned status)
         dev->config->set_status(dev, dev->config->get_status(dev) | status);
 }
 
+void virtio_check_driver_offered_feature(const struct virtio_device *vdev,
+                                         unsigned int fbit)
+{
+        unsigned int i;
+        struct virtio_driver *drv = container_of(vdev->dev.driver,
+                                                 struct virtio_driver, driver);
+
+        for (i = 0; i < drv->feature_table_size; i++)
+                if (drv->feature_table[i] == fbit)
+                        return;
+        BUG();
+}
+EXPORT_SYMBOL_GPL(virtio_check_driver_offered_feature);
+
 static int virtio_dev_probe(struct device *_d)
 {
-        int err;
+        int err, i;
         struct virtio_device *dev = container_of(_d,struct virtio_device,dev);
         struct virtio_driver *drv = container_of(dev->dev.driver,
                                                  struct virtio_driver, driver);
+        u32 device_features;
 
+        /* We have a driver! */
         add_status(dev, VIRTIO_CONFIG_S_DRIVER);
+
+        /* Figure out what features the device supports. */
+        device_features = dev->config->get_features(dev);
+
+        /* Features supported by both device and driver into dev->features. */
+        memset(dev->features, 0, sizeof(dev->features));
+        for (i = 0; i < drv->feature_table_size; i++) {
+                unsigned int f = drv->feature_table[i];
+                BUG_ON(f >= 32);
+                if (device_features & (1 << f))
+                        set_bit(f, dev->features);
+        }
+
         err = drv->probe(dev);
         if (err)
                 add_status(dev, VIRTIO_CONFIG_S_FAILED);
-        else
+        else {
                 add_status(dev, VIRTIO_CONFIG_S_DRIVER_OK);
+                /* They should never have set feature bits beyond 32 */
+                dev->config->set_features(dev, dev->features[0]);
+        }
         return err;
 }
 
@@ -114,6 +146,8 @@ static int virtio_dev_remove(struct device *_d)
 
 int register_virtio_driver(struct virtio_driver *driver)
 {
+        /* Catch this early. */
+        BUG_ON(driver->feature_table_size && !driver->feature_table);
         driver->driver.bus = &virtio_bus;
         driver->driver.probe = virtio_dev_probe;
         driver->driver.remove = virtio_dev_remove;
diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c
index 0b3efc31ee6d..bfef604160d1 100644
--- a/drivers/virtio/virtio_balloon.c
+++ b/drivers/virtio/virtio_balloon.c
@@ -155,9 +155,9 @@ static void virtballoon_changed(struct virtio_device *vdev)
 static inline s64 towards_target(struct virtio_balloon *vb)
 {
         u32 v;
-        __virtio_config_val(vb->vdev,
-                            offsetof(struct virtio_balloon_config, num_pages),
-                            &v);
+        vb->vdev->config->get(vb->vdev,
+                              offsetof(struct virtio_balloon_config, num_pages),
+                              &v, sizeof(v));
         return v - vb->num_pages;
 }
 
@@ -227,7 +227,7 @@ static int virtballoon_probe(struct virtio_device *vdev)
         }
 
         vb->tell_host_first
-                = vdev->config->feature(vdev, VIRTIO_BALLOON_F_MUST_TELL_HOST);
+                = virtio_has_feature(vdev, VIRTIO_BALLOON_F_MUST_TELL_HOST);
 
         return 0;
 
@@ -259,7 +259,11 @@ static void virtballoon_remove(struct virtio_device *vdev)
         kfree(vb);
 }
 
+static unsigned int features[] = { VIRTIO_BALLOON_F_MUST_TELL_HOST };
+
 static struct virtio_driver virtio_balloon = {
+        .feature_table = features,
+        .feature_table_size = ARRAY_SIZE(features),
         .driver.name =  KBUILD_MODNAME,
         .driver.owner = THIS_MODULE,
         .id_table =     id_table,
diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c
index c0df924766a7..27e9fc9117cd 100644
--- a/drivers/virtio/virtio_pci.c
+++ b/drivers/virtio/virtio_pci.c
@@ -87,23 +87,22 @@ static struct virtio_pci_device *to_vp_device(struct virtio_device *vdev)
         return container_of(vdev, struct virtio_pci_device, vdev);
 }
 
-/* virtio config->feature() implementation */
-static bool vp_feature(struct virtio_device *vdev, unsigned bit)
+/* virtio config->get_features() implementation */
+static u32 vp_get_features(struct virtio_device *vdev)
+{
+        struct virtio_pci_device *vp_dev = to_vp_device(vdev);
+
+        /* When someone needs more than 32 feature bits, we'll need to
+         * steal a bit to indicate that the rest are somewhere else. */
+        return ioread32(vp_dev->ioaddr + VIRTIO_PCI_HOST_FEATURES);
+}
+
+/* virtio config->set_features() implementation */
+static void vp_set_features(struct virtio_device *vdev, u32 features)
 {
         struct virtio_pci_device *vp_dev = to_vp_device(vdev);
-        u32 mask;
-
-        /* Since this function is supposed to have the side effect of
-         * enabling a queried feature, we simulate that by doing a read
-         * from the host feature bitmask and then writing to the guest
-         * feature bitmask */
-        mask = ioread32(vp_dev->ioaddr + VIRTIO_PCI_HOST_FEATURES);
-        if (mask & (1 << bit)) {
-                mask |= (1 << bit);
-                iowrite32(mask, vp_dev->ioaddr + VIRTIO_PCI_GUEST_FEATURES);
-        }
 
-        return !!(mask & (1 << bit));
+        iowrite32(features, vp_dev->ioaddr + VIRTIO_PCI_GUEST_FEATURES);
 }
 
 /* virtio config->get() implementation */
@@ -145,14 +144,14 @@ static void vp_set_status(struct virtio_device *vdev, u8 status)
         struct virtio_pci_device *vp_dev = to_vp_device(vdev);
         /* We should never be setting status to 0. */
         BUG_ON(status == 0);
-        return iowrite8(status, vp_dev->ioaddr + VIRTIO_PCI_STATUS);
+        iowrite8(status, vp_dev->ioaddr + VIRTIO_PCI_STATUS);
 }
 
 static void vp_reset(struct virtio_device *vdev)
 {
         struct virtio_pci_device *vp_dev = to_vp_device(vdev);
         /* 0 status means a reset. */
-        return iowrite8(0, vp_dev->ioaddr + VIRTIO_PCI_STATUS);
+        iowrite8(0, vp_dev->ioaddr + VIRTIO_PCI_STATUS);
 }
 
 /* the notify function used when creating a virt queue */
@@ -293,7 +292,6 @@ static void vp_del_vq(struct virtqueue *vq)
 }
 
 static struct virtio_config_ops virtio_pci_config_ops = {
-        .feature        = vp_feature,
         .get            = vp_get,
         .set            = vp_set,
         .get_status     = vp_get_status,
@@ -301,6 +299,8 @@ static struct virtio_config_ops virtio_pci_config_ops = {
         .reset          = vp_reset,
         .find_vq        = vp_find_vq,
         .del_vq         = vp_del_vq,
+        .get_features   = vp_get_features,
+        .set_features   = vp_set_features,
 };
 
 /* the PCI probing function */
diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c
index c2fa5c630813..937a49d6772c 100644
--- a/drivers/virtio/virtio_ring.c
+++ b/drivers/virtio/virtio_ring.c
@@ -184,6 +184,11 @@ static void *vring_get_buf(struct virtqueue *_vq, unsigned int *len)
 
         START_USE(vq);
 
+        if (unlikely(vq->broken)) {
+                END_USE(vq);
+                return NULL;
+        }
+
         if (!more_used(vq)) {
                 pr_debug("No more buffers in queue\n");
                 END_USE(vq);
diff --git a/fs/anon_inodes.c b/fs/anon_inodes.c
index f42be069e085..977ef208c051 100644
--- a/fs/anon_inodes.c
+++ b/fs/anon_inodes.c
@@ -57,9 +57,6 @@ static struct dentry_operations anon_inodefs_dentry_operations = {
  *                    anonymous inode, and a dentry that describe the "class"
  *                    of the file
  *
- * @pfd:     [out]   pointer to the file descriptor
- * @dpinode: [out]   pointer to the inode
- * @pfile:   [out]   pointer to the file struct
  * @name:    [in]    name of the "class" of the new file
  * @fops     [in]    file operations for the new file
  * @priv     [in]    private data for the new file (will be file's private_data)
@@ -68,10 +65,9 @@ static struct dentry_operations anon_inodefs_dentry_operations = {
  * that do not need to have a full-fledged inode in order to operate correctly.
  * All the files created with anon_inode_getfd() will share a single inode,
  * hence saving memory and avoiding code duplication for the file/inode/dentry
- * setup.
+ * setup.  Returns new descriptor or -error.
  */
-int anon_inode_getfd(int *pfd, struct inode **pinode, struct file **pfile,
-                     const char *name, const struct file_operations *fops,
+int anon_inode_getfd(const char *name, const struct file_operations *fops,
                      void *priv)
 {
         struct qstr this;
@@ -125,10 +121,7 @@ int anon_inode_getfd(int *pfd, struct inode **pinode, struct file **pfile,
 
         fd_install(fd, file);
 
-        *pfd = fd;
-        *pinode = anon_inode_inode;
-        *pfile = file;
-        return 0;
+        return fd;
 
 err_dput:
         dput(dentry);
diff --git a/fs/autofs4/expire.c b/fs/autofs4/expire.c
index d96e5c14a9ca..894fee54d4d8 100644
--- a/fs/autofs4/expire.c
+++ b/fs/autofs4/expire.c
@@ -73,8 +73,8 @@ static int autofs4_mount_busy(struct vfsmount *mnt, struct dentry *dentry)
         status = 0;
 done:
         DPRINTK("returning = %d", status);
-        mntput(mnt);
         dput(dentry);
+        mntput(mnt);
         return status;
 }
 
@@ -333,7 +333,7 @@ static struct dentry *autofs4_expire_indirect(struct super_block *sb,
                         /* Can we expire this guy */
                         if (autofs4_can_expire(dentry, timeout, do_now)) {
                                 expired = dentry;
-                                break;
+                                goto found;
                         }
                         goto next;
                 }
@@ -352,7 +352,7 @@ static struct dentry *autofs4_expire_indirect(struct super_block *sb,
                                 inf->flags |= AUTOFS_INF_EXPIRING;
                                 spin_unlock(&sbi->fs_lock);
                                 expired = dentry;
-                                break;
+                                goto found;
                         }
                         spin_unlock(&sbi->fs_lock);
                 /*
@@ -363,7 +363,7 @@ static struct dentry *autofs4_expire_indirect(struct super_block *sb,
                         expired = autofs4_check_leaves(mnt, dentry, timeout, do_now);
                         if (expired) {
                                 dput(dentry);
-                                break;
+                                goto found;
                         }
                 }
 next:
@@ -371,18 +371,16 @@ next:
                 spin_lock(&dcache_lock);
                 next = next->next;
         }
-
-        if (expired) {
-                DPRINTK("returning %p %.*s",
-                        expired, (int)expired->d_name.len, expired->d_name.name);
-                spin_lock(&dcache_lock);
-                list_move(&expired->d_parent->d_subdirs, &expired->d_u.d_child);
-                spin_unlock(&dcache_lock);
-                return expired;
-        }
         spin_unlock(&dcache_lock);
-
         return NULL;
+
+found:
+        DPRINTK("returning %p %.*s",
+                expired, (int)expired->d_name.len, expired->d_name.name);
+        spin_lock(&dcache_lock);
+        list_move(&expired->d_parent->d_subdirs, &expired->d_u.d_child);
+        spin_unlock(&dcache_lock);
+        return expired;
 }
 
 /* Perform an expiry operation */
diff --git a/fs/autofs4/root.c b/fs/autofs4/root.c
index aa4c5ff8a40d..edf5b6bddb52 100644
--- a/fs/autofs4/root.c
+++ b/fs/autofs4/root.c
@@ -146,17 +146,17 @@ static int autofs4_dir_open(struct inode *inode, struct file *file)
 
         if (d_mountpoint(dentry)) {
                 struct file *fp = NULL;
-                struct vfsmount *fp_mnt = mntget(mnt);
-                struct dentry *fp_dentry = dget(dentry);
+                struct path fp_path = { .dentry = dentry, .mnt = mnt };
 
-                if (!autofs4_follow_mount(&fp_mnt, &fp_dentry)) {
-                        dput(fp_dentry);
-                        mntput(fp_mnt);
+                path_get(&fp_path);
+
+                if (!autofs4_follow_mount(&fp_path.mnt, &fp_path.dentry)) {
+                        path_put(&fp_path);
                         dcache_dir_close(inode, file);
                         goto out;
                 }
 
-                fp = dentry_open(fp_dentry, fp_mnt, file->f_flags);
+                fp = dentry_open(fp_path.dentry, fp_path.mnt, file->f_flags);
                 status = PTR_ERR(fp);
                 if (IS_ERR(fp)) {
                         dcache_dir_close(inode, file);
@@ -242,7 +242,8 @@ static int try_to_fill_dentry(struct dentry *dentry, int flags)
 {
         struct autofs_sb_info *sbi = autofs4_sbi(dentry->d_sb);
         struct autofs_info *ino = autofs4_dentry_ino(dentry);
-        int status = 0;
+        struct dentry *new;
+        int status;
 
         /* Block on any pending expiry here; invalidate the dentry
            when expiration is done to trigger mount request with a new
@@ -318,7 +319,28 @@ static int try_to_fill_dentry(struct dentry *dentry, int flags)
         spin_lock(&dentry->d_lock);
         dentry->d_flags &= ~DCACHE_AUTOFS_PENDING;
         spin_unlock(&dentry->d_lock);
-        return status;
+
+        /*
+         * The dentry that is passed in from lookup may not be the one
+         * we end up using, as mkdir can create a new one.  If this
+         * happens, and another process tries the lookup at the same time,
+         * it will set the PENDING flag on this new dentry, but add itself
+         * to our waitq.  Then, if after the lookup succeeds, the first
+         * process that requested the mount performs another lookup of the
+         * same directory, it will show up as still pending!  So, we need
+         * to redo the lookup here and clear pending on that dentry.
+         */
+        if (d_unhashed(dentry)) {
+                new = d_lookup(dentry->d_parent, &dentry->d_name);
+                if (new) {
+                        spin_lock(&new->d_lock);
+                        new->d_flags &= ~DCACHE_AUTOFS_PENDING;
+                        spin_unlock(&new->d_lock);
+                        dput(new);
+                }
+        }
+
+        return 0;
 }
 
 /* For autofs direct mounts the follow link triggers the mount */
diff --git a/fs/autofs4/waitq.c b/fs/autofs4/waitq.c
index 1fe28e4754c2..75e5955c3f6d 100644
--- a/fs/autofs4/waitq.c
+++ b/fs/autofs4/waitq.c
@@ -171,7 +171,7 @@ static int autofs4_getpath(struct autofs_sb_info *sbi,
         for (tmp = dentry ; tmp != root ; tmp = tmp->d_parent)
                 len += tmp->d_name.len + 1;
 
-        if (--len > NAME_MAX) {
+        if (!len || --len > NAME_MAX) {
                 spin_unlock(&dcache_lock);
                 return 0;
         }
diff --git a/fs/compat.c b/fs/compat.c
index 139dc93c092d..332a869d2c53 100644
--- a/fs/compat.c
+++ b/fs/compat.c
@@ -24,6 +24,7 @@
 #include <linux/fcntl.h>
 #include <linux/namei.h>
 #include <linux/file.h>
+#include <linux/fdtable.h>
 #include <linux/vfs.h>
 #include <linux/ioctl.h>
 #include <linux/init.h>
diff --git a/fs/dnotify.c b/fs/dnotify.c
index eaecc4cfe540..676073b8dda5 100644
--- a/fs/dnotify.c
+++ b/fs/dnotify.c
@@ -20,7 +20,7 @@
 #include <linux/init.h>
 #include <linux/spinlock.h>
 #include <linux/slab.h>
-#include <linux/file.h>
+#include <linux/fdtable.h>
 
 int dir_notify_enable __read_mostly = 1;
 
diff --git a/fs/eventfd.c b/fs/eventfd.c
index a9f130cd50ac..343942deeec1 100644
--- a/fs/eventfd.c
+++ b/fs/eventfd.c
@@ -200,10 +200,8 @@ struct file *eventfd_fget(int fd)
 
 asmlinkage long sys_eventfd(unsigned int count)
 {
-        int error, fd;
+        int fd;
         struct eventfd_ctx *ctx;
-        struct file *file;
-        struct inode *inode;
 
         ctx = kmalloc(sizeof(*ctx), GFP_KERNEL);
         if (!ctx)
@@ -216,12 +214,9 @@ asmlinkage long sys_eventfd(unsigned int count)
          * When we call this, the initialization must be complete, since
          * anon_inode_getfd() will install the fd.
          */
-        error = anon_inode_getfd(&fd, &inode, &file, "[eventfd]",
-                                 &eventfd_fops, ctx);
-        if (!error)
-                return fd;
-
-        kfree(ctx);
-        return error;
+        fd = anon_inode_getfd("[eventfd]", &eventfd_fops, ctx);
+        if (fd < 0)
+                kfree(ctx);
+        return fd;
 }
 
diff --git a/fs/eventpoll.c b/fs/eventpoll.c
index 221086fef174..990c01d2d66b 100644
--- a/fs/eventpoll.c
+++ b/fs/eventpoll.c
@@ -1050,8 +1050,6 @@ asmlinkage long sys_epoll_create(int size)
 {
         int error, fd = -1;
         struct eventpoll *ep;
-        struct inode *inode;
-        struct file *file;
 
         DNPRINTK(3, (KERN_INFO "[%p] eventpoll: sys_epoll_create(%d)\n",
                      current, size));
@@ -1061,29 +1059,24 @@ asmlinkage long sys_epoll_create(int size)
          * structure ( "struct eventpoll" ).
          */
         error = -EINVAL;
-        if (size <= 0 || (error = ep_alloc(&ep)) != 0)
+        if (size <= 0 || (error = ep_alloc(&ep)) < 0) {
+                fd = error;
                 goto error_return;
+        }
 
         /*
          * Creates all the items needed to setup an eventpoll file. That is,
-         * a file structure, and inode and a free file descriptor.
+         * a file structure and a free file descriptor.
          */
-        error = anon_inode_getfd(&fd, &inode, &file, "[eventpoll]",
-                                 &eventpoll_fops, ep);
-        if (error)
-                goto error_free;
+        fd = anon_inode_getfd("[eventpoll]", &eventpoll_fops, ep);
+        if (fd < 0)
+                ep_free(ep);
 
+error_return:
         DNPRINTK(3, (KERN_INFO "[%p] eventpoll: sys_epoll_create(%d) = %d\n",
                      current, size, fd));
 
         return fd;
-
-error_free:
-        ep_free(ep);
-error_return:
-        DNPRINTK(3, (KERN_INFO "[%p] eventpoll: sys_epoll_create(%d) = %d\n",
-                     current, size, error));
-        return error;
 }
 
 /*
diff --git a/fs/exec.c b/fs/exec.c
index 9f9f931ef949..aeaa9791d8be 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -24,6 +24,7 @@
 
 #include <linux/slab.h>
 #include <linux/file.h>
+#include <linux/fdtable.h>
 #include <linux/mman.h>
 #include <linux/a.out.h>
 #include <linux/stat.h>
diff --git a/fs/fcntl.c b/fs/fcntl.c
index 3f3ac630ccde..bfd776509a72 100644
--- a/fs/fcntl.c
+++ b/fs/fcntl.c
@@ -9,6 +9,7 @@
 #include <linux/mm.h>
 #include <linux/fs.h>
 #include <linux/file.h>
+#include <linux/fdtable.h>
 #include <linux/capability.h>
 #include <linux/dnotify.h>
 #include <linux/smp_lock.h>
diff --git a/fs/file.c b/fs/file.c
index 5110acb1c9ef..4c6f0ea12c41 100644
--- a/fs/file.c
+++ b/fs/file.c
@@ -12,6 +12,7 @@
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
 #include <linux/file.h>
+#include <linux/fdtable.h>
 #include <linux/bitops.h>
 #include <linux/interrupt.h>
 #include <linux/spinlock.h>
@@ -149,8 +150,16 @@ static struct fdtable * alloc_fdtable(unsigned int nr)
         nr /= (1024 / sizeof(struct file *));
         nr = roundup_pow_of_two(nr + 1);
         nr *= (1024 / sizeof(struct file *));
-        if (nr > sysctl_nr_open)
-                nr = sysctl_nr_open;
+        /*
+         * Note that this can drive nr *below* what we had passed if sysctl_nr_open
+         * had been set lower between the check in expand_files() and here.  Deal
+         * with that in caller, it's cheaper that way.
+         *
+         * We make sure that nr remains a multiple of BITS_PER_LONG - otherwise
+         * bitmaps handling below becomes unpleasant, to put it mildly...
+         */
+        if (unlikely(nr > sysctl_nr_open))
+                nr = ((sysctl_nr_open - 1) | (BITS_PER_LONG - 1)) + 1;
 
         fdt = kmalloc(sizeof(struct fdtable), GFP_KERNEL);
         if (!fdt)
@@ -199,6 +208,16 @@ static int expand_fdtable(struct files_struct *files, int nr)
         if (!new_fdt)
                 return -ENOMEM;
         /*
+         * extremely unlikely race - sysctl_nr_open decreased between the check in
+         * caller and alloc_fdtable().  Cheaper to catch it here...
+         */
+        if (unlikely(new_fdt->max_fds <= nr)) {
+                free_fdarr(new_fdt);
+                free_fdset(new_fdt);
+                kfree(new_fdt);
+                return -EMFILE;
+        }
+        /*
          * Check again since another task may have expanded the fd table while
          * we dropped the lock
          */
diff --git a/fs/file_table.c b/fs/file_table.c
index 7a0a9b872251..83084225b4c3 100644
--- a/fs/file_table.c
+++ b/fs/file_table.c
@@ -8,6 +8,7 @@
 #include <linux/string.h>
 #include <linux/slab.h>
 #include <linux/file.h>
+#include <linux/fdtable.h>
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/fs.h>
diff --git a/fs/fuse/file.c b/fs/fuse/file.c
index 9ced35b00686..f28cf8b46f80 100644
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -934,7 +934,7 @@ static int fuse_get_user_pages(struct fuse_req *req, const char __user *buf,
 
         nbytes = min(nbytes, (unsigned) FUSE_MAX_PAGES_PER_REQ << PAGE_SHIFT);
         npages = (nbytes + offset + PAGE_SIZE - 1) >> PAGE_SHIFT;
-        npages = min(max(npages, 1), FUSE_MAX_PAGES_PER_REQ);
+        npages = clamp(npages, 1, FUSE_MAX_PAGES_PER_REQ);
         down_read(&current->mm->mmap_sem);
         npages = get_user_pages(current, current->mm, user_addr, npages, write,
                                 0, req->pages, NULL);
diff --git a/fs/jffs2/build.c b/fs/jffs2/build.c
index d58f845ccb85..c5e1450d79f9 100644
--- a/fs/jffs2/build.c
+++ b/fs/jffs2/build.c
@@ -46,7 +46,7 @@ next_inode(int *i, struct jffs2_inode_cache *ic, struct jffs2_sb_info *c)
 
 
 static void jffs2_build_inode_pass1(struct jffs2_sb_info *c,
-                                        struct jffs2_inode_cache *ic)
+                                    struct jffs2_inode_cache *ic)
 {
         struct jffs2_full_dirent *fd;
 
@@ -68,11 +68,17 @@ static void jffs2_build_inode_pass1(struct jffs2_sb_info *c,
                         continue;
                 }
 
-                if (child_ic->nlink++ && fd->type == DT_DIR) {
-                        JFFS2_ERROR("child dir \"%s\" (ino #%u) of dir ino #%u appears to be a hard link\n",
-                                fd->name, fd->ino, ic->ino);
-                        /* TODO: What do we do about it? */
-                }
+                if (fd->type == DT_DIR) {
+                        if (child_ic->pino_nlink) {
+                                JFFS2_ERROR("child dir \"%s\" (ino #%u) of dir ino #%u appears to be a hard link\n",
+                                            fd->name, fd->ino, ic->ino);
+                                /* TODO: What do we do about it? */
+                        } else {
+                                child_ic->pino_nlink = ic->ino;
+                        }
+                } else
+                        child_ic->pino_nlink++;
+
                 dbg_fsbuild("increased nlink for child \"%s\" (ino #%u)\n", fd->name, fd->ino);
                 /* Can't free scan_dents so far. We might need them in pass 2 */
         }
@@ -125,7 +131,7 @@ static int jffs2_build_filesystem(struct jffs2_sb_info *c)
         dbg_fsbuild("pass 2 starting\n");
 
         for_each_inode(i, c, ic) {
-                if (ic->nlink)
+                if (ic->pino_nlink)
                         continue;
 
                 jffs2_build_remove_unlinked_inode(c, ic, &dead_fds);
@@ -232,16 +238,19 @@ static void jffs2_build_remove_unlinked_inode(struct jffs2_sb_info *c,
                         /* Reduce nlink of the child. If it's now zero, stick it on the
                            dead_fds list to be cleaned up later. Else just free the fd */
 
-                        child_ic->nlink--;
+                        if (fd->type == DT_DIR)
+                                child_ic->pino_nlink = 0;
+                        else
+                                child_ic->pino_nlink--;
 
-                        if (!child_ic->nlink) {
-                                dbg_fsbuild("inode #%u (\"%s\") has now got zero nlink, adding to dead_fds list.\n",
+                        if (!child_ic->pino_nlink) {
+                                dbg_fsbuild("inode #%u (\"%s\") now has no links; adding to dead_fds list.\n",
                                           fd->ino, fd->name);
                                 fd->next = *dead_fds;
                                 *dead_fds = fd;
                         } else {
                                 dbg_fsbuild("inode #%u (\"%s\") has now got nlink %d. Ignoring.\n",
-                                          fd->ino, fd->name, child_ic->nlink);
+                                          fd->ino, fd->name, child_ic->pino_nlink);
                                 jffs2_free_full_dirent(fd);
                         }
                 }
diff --git a/fs/jffs2/dir.c b/fs/jffs2/dir.c
index c63e7a96af0d..c0c141f6fde1 100644
--- a/fs/jffs2/dir.c
+++ b/fs/jffs2/dir.c
@@ -208,6 +208,13 @@ static int jffs2_create(struct inode *dir_i, struct dentry *dentry, int mode,
         f = JFFS2_INODE_INFO(inode);
         dir_f = JFFS2_INODE_INFO(dir_i);
 
+        /* jffs2_do_create() will want to lock it, _after_ reserving
+           space and taking c-alloc_sem. If we keep it locked here,
+           lockdep gets unhappy (although it's a false positive;
+           nothing else will be looking at this inode yet so there's
+           no chance of AB-BA deadlock involving its f->sem). */
+        mutex_unlock(&f->sem);
+
         ret = jffs2_do_create(c, dir_f, f, ri,
                               dentry->d_name.name, dentry->d_name.len);
         if (ret)
@@ -219,7 +226,8 @@ static int jffs2_create(struct inode *dir_i, struct dentry *dentry, int mode,
         d_instantiate(dentry, inode);
 
         D1(printk(KERN_DEBUG "jffs2_create: Created ino #%lu with mode %o, nlink %d(%d). nrpages %ld\n",
-                  inode->i_ino, inode->i_mode, inode->i_nlink, f->inocache->nlink, inode->i_mapping->nrpages));
+                  inode->i_ino, inode->i_mode, inode->i_nlink,
+                  f->inocache->pino_nlink, inode->i_mapping->nrpages));
         return 0;
 
  fail:
@@ -243,7 +251,7 @@ static int jffs2_unlink(struct inode *dir_i, struct dentry *dentry)
         ret = jffs2_do_unlink(c, dir_f, dentry->d_name.name,
                               dentry->d_name.len, dead_f, now);
         if (dead_f->inocache)
-                dentry->d_inode->i_nlink = dead_f->inocache->nlink;
+                dentry->d_inode->i_nlink = dead_f->inocache->pino_nlink;
         if (!ret)
                 dir_i->i_mtime = dir_i->i_ctime = ITIME(now);
         return ret;
@@ -276,7 +284,7 @@ static int jffs2_link (struct dentry *old_dentry, struct inode *dir_i, struct de
 
         if (!ret) {
                 mutex_lock(&f->sem);
-                old_dentry->d_inode->i_nlink = ++f->inocache->nlink;
+                old_dentry->d_inode->i_nlink = ++f->inocache->pino_nlink;
                 mutex_unlock(&f->sem);
                 d_instantiate(dentry, old_dentry->d_inode);
                 dir_i->i_mtime = dir_i->i_ctime = ITIME(now);
@@ -493,11 +501,14 @@ static int jffs2_mkdir (struct inode *dir_i, struct dentry *dentry, int mode)
 
         inode->i_op = &jffs2_dir_inode_operations;
         inode->i_fop = &jffs2_dir_operations;
-        /* Directories get nlink 2 at start */
-        inode->i_nlink = 2;
 
         f = JFFS2_INODE_INFO(inode);
 
+        /* Directories get nlink 2 at start */
+        inode->i_nlink = 2;
+        /* but ic->pino_nlink is the parent ino# */
+        f->inocache->pino_nlink = dir_i->i_ino;
+
         ri->data_crc = cpu_to_je32(0);
         ri->node_crc = cpu_to_je32(crc32(0, ri, sizeof(*ri)-8));
 
@@ -594,17 +605,25 @@ static int jffs2_mkdir (struct inode *dir_i, struct dentry *dentry, int mode)
 
 static int jffs2_rmdir (struct inode *dir_i, struct dentry *dentry)
 {
+        struct jffs2_sb_info *c = JFFS2_SB_INFO(dir_i->i_sb);
+        struct jffs2_inode_info *dir_f = JFFS2_INODE_INFO(dir_i);
         struct jffs2_inode_info *f = JFFS2_INODE_INFO(dentry->d_inode);
         struct jffs2_full_dirent *fd;
         int ret;
+        uint32_t now = get_seconds();
 
         for (fd = f->dents ; fd; fd = fd->next) {
                 if (fd->ino)
                         return -ENOTEMPTY;
         }
-        ret = jffs2_unlink(dir_i, dentry);
-        if (!ret)
+
+        ret = jffs2_do_unlink(c, dir_f, dentry->d_name.name,
+                              dentry->d_name.len, f, now);
+        if (!ret) {
+                dir_i->i_mtime = dir_i->i_ctime = ITIME(now);
+                clear_nlink(dentry->d_inode);
                 drop_nlink(dir_i);
+        }
         return ret;
 }
 
@@ -817,7 +836,10 @@ static int jffs2_rename (struct inode *old_dir_i, struct dentry *old_dentry,
                    inode which didn't exist. */
                 if (victim_f->inocache) {
                         mutex_lock(&victim_f->sem);
-                        victim_f->inocache->nlink--;
+                        if (S_ISDIR(new_dentry->d_inode->i_mode))
+                                victim_f->inocache->pino_nlink = 0;
+                        else
+                                victim_f->inocache->pino_nlink--;
                         mutex_unlock(&victim_f->sem);
                 }
         }
@@ -838,8 +860,8 @@ static int jffs2_rename (struct inode *old_dir_i, struct dentry *old_dentry,
                 struct jffs2_inode_info *f = JFFS2_INODE_INFO(old_dentry->d_inode);
                 mutex_lock(&f->sem);
                 inc_nlink(old_dentry->d_inode);
-                if (f->inocache)
-                        f->inocache->nlink++;
+                if (f->inocache && !S_ISDIR(old_dentry->d_inode->i_mode))
+                        f->inocache->pino_nlink++;
                 mutex_unlock(&f->sem);
 
                 printk(KERN_NOTICE "jffs2_rename(): Link succeeded, unlink failed (err %d). You now have a hard link\n", ret);
diff --git a/fs/jffs2/erase.c b/fs/jffs2/erase.c
index 25a640e566d3..dddb2a6c9e2c 100644
--- a/fs/jffs2/erase.c
+++ b/fs/jffs2/erase.c
@@ -294,7 +294,7 @@ static inline void jffs2_remove_node_refs_from_ino_list(struct jffs2_sb_info *c,
                         break;
 #endif
                 default:
-                        if (ic->nodes == (void *)ic && ic->nlink == 0)
+                        if (ic->nodes == (void *)ic && ic->pino_nlink == 0)
                                 jffs2_del_ino_cache(c, ic);
         }
 }
@@ -332,7 +332,8 @@ static int jffs2_block_check_erase(struct jffs2_sb_info *c, struct jffs2_erasebl
         if (c->mtd->point) {
                 unsigned long *wordebuf;
 
-                ret = c->mtd->point(c->mtd, jeb->offset, c->sector_size, &retlen, (unsigned char **)&ebuf);
+                ret = c->mtd->point(c->mtd, jeb->offset, c->sector_size,
+                                    &retlen, &ebuf, NULL);
                 if (ret) {
                         D1(printk(KERN_DEBUG "MTD point failed %d\n", ret));
                         goto do_flash_read;
@@ -340,7 +341,7 @@ static int jffs2_block_check_erase(struct jffs2_sb_info *c, struct jffs2_erasebl
                 if (retlen < c->sector_size) {
                         /* Don't muck about if it won't let us point to the whole erase sector */
                         D1(printk(KERN_DEBUG "MTD point returned len too short: 0x%zx\n", retlen));
-                        c->mtd->unpoint(c->mtd, ebuf, jeb->offset, retlen);
+                        c->mtd->unpoint(c->mtd, jeb->offset, retlen);
                         goto do_flash_read;
                 }
                 wordebuf = ebuf-sizeof(*wordebuf);
@@ -349,7 +350,7 @@ static int jffs2_block_check_erase(struct jffs2_sb_info *c, struct jffs2_erasebl
                    if (*++wordebuf != ~0)
                            break;
                 } while(--retlen);
-                c->mtd->unpoint(c->mtd, ebuf, jeb->offset, c->sector_size);
+                c->mtd->unpoint(c->mtd, jeb->offset, c->sector_size);
                 if (retlen) {
                         printk(KERN_WARNING "Newly-erased block contained word 0x%lx at offset 0x%08tx\n",
                                *wordebuf, jeb->offset + c->sector_size-retlen*sizeof(*wordebuf));
diff --git a/fs/jffs2/fs.c b/fs/jffs2/fs.c
index 3eb1c84b0a33..086c43830221 100644
--- a/fs/jffs2/fs.c
+++ b/fs/jffs2/fs.c
@@ -273,7 +273,7 @@ struct inode *jffs2_iget(struct super_block *sb, unsigned long ino)
         inode->i_mtime = ITIME(je32_to_cpu(latest_node.mtime));
         inode->i_ctime = ITIME(je32_to_cpu(latest_node.ctime));
 
-        inode->i_nlink = f->inocache->nlink;
+        inode->i_nlink = f->inocache->pino_nlink;
 
         inode->i_blocks = (inode->i_size + 511) >> 9;
 
@@ -286,13 +286,12 @@ struct inode *jffs2_iget(struct super_block *sb, unsigned long ino)
         case S_IFDIR:
         {
                 struct jffs2_full_dirent *fd;
+                inode->i_nlink = 2; /* parent and '.' */
 
                 for (fd=f->dents; fd; fd = fd->next) {
                         if (fd->type == DT_DIR && fd->ino)
                                 inc_nlink(inode);
                 }
-                /* and '..' */
-                inc_nlink(inode);
                 /* Root dir gets i_nlink 3 for some reason */
                 if (inode->i_ino == 1)
                         inc_nlink(inode);
@@ -586,11 +585,12 @@ void jffs2_gc_release_inode(struct jffs2_sb_info *c,
 }
 
 struct jffs2_inode_info *jffs2_gc_fetch_inode(struct jffs2_sb_info *c,
-                                                     int inum, int nlink)
+                                              int inum, int unlinked)
 {
         struct inode *inode;
         struct jffs2_inode_cache *ic;
-        if (!nlink) {
+
+        if (unlinked) {
                 /* The inode has zero nlink but its nodes weren't yet marked
                    obsolete. This has to be because we're still waiting for
                    the final (close() and) iput() to happen.
@@ -638,8 +638,8 @@ struct jffs2_inode_info *jffs2_gc_fetch_inode(struct jffs2_sb_info *c,
                         return ERR_CAST(inode);
         }
         if (is_bad_inode(inode)) {
-                printk(KERN_NOTICE "Eep. read_inode() failed for ino #%u. nlink %d\n",
-                       inum, nlink);
+                printk(KERN_NOTICE "Eep. read_inode() failed for ino #%u. unlinked %d\n",
+                       inum, unlinked);
                 /* NB. This will happen again. We need to do something appropriate here. */
                 iput(inode);
                 return ERR_PTR(-EIO);
diff --git a/fs/jffs2/gc.c b/fs/jffs2/gc.c
index bad005664e30..090c556ffed2 100644
--- a/fs/jffs2/gc.c
+++ b/fs/jffs2/gc.c
@@ -161,8 +161,8 @@ int jffs2_garbage_collect_pass(struct jffs2_sb_info *c)
                         continue;
                 }
 
-                if (!ic->nlink) {
-                        D1(printk(KERN_DEBUG "Skipping check of ino #%d with nlink zero\n",
+                if (!ic->pino_nlink) {
+                        D1(printk(KERN_DEBUG "Skipping check of ino #%d with nlink/pino zero\n",
                                   ic->ino));
                         spin_unlock(&c->inocache_lock);
                         jffs2_xattr_delete_inode(c, ic);
@@ -398,10 +398,10 @@ int jffs2_garbage_collect_pass(struct jffs2_sb_info *c)
            it's vaguely possible. */
 
         inum = ic->ino;
-        nlink = ic->nlink;
+        nlink = ic->pino_nlink;
         spin_unlock(&c->inocache_lock);
 
-        f = jffs2_gc_fetch_inode(c, inum, nlink);
+        f = jffs2_gc_fetch_inode(c, inum, !nlink);
         if (IS_ERR(f)) {
                 ret = PTR_ERR(f);
                 goto release_sem;
diff --git a/fs/jffs2/nodelist.h b/fs/jffs2/nodelist.h
index 8219df6eb6d8..1750445556c3 100644
--- a/fs/jffs2/nodelist.h
+++ b/fs/jffs2/nodelist.h
@@ -177,7 +177,10 @@ struct jffs2_inode_cache {
 #ifdef CONFIG_JFFS2_FS_XATTR
         struct jffs2_xattr_ref *xref;
 #endif
-        int nlink;
+        uint32_t pino_nlink;    /* Directories store parent inode
+                                   here; other inodes store nlink.
+                                   Zero always means that it's
+                                   completely unlinked. */
 };
 
 /* Inode states for 'state' above. We need the 'GC' state to prevent
diff --git a/fs/jffs2/nodemgmt.c b/fs/jffs2/nodemgmt.c
index 9df8f3ef20df..a9bf9603c1ba 100644
--- a/fs/jffs2/nodemgmt.c
+++ b/fs/jffs2/nodemgmt.c
@@ -709,7 +709,7 @@ void jffs2_mark_node_obsolete(struct jffs2_sb_info *c, struct jffs2_raw_node_ref
                                 break;
 #endif
                         default:
-                                if (ic->nodes == (void *)ic && ic->nlink == 0)
+                                if (ic->nodes == (void *)ic && ic->pino_nlink == 0)
                                         jffs2_del_ino_cache(c, ic);
                                 break;
                 }
diff --git a/fs/jffs2/os-linux.h b/fs/jffs2/os-linux.h
index 1b10d2594092..2cc866cf134f 100644
--- a/fs/jffs2/os-linux.h
+++ b/fs/jffs2/os-linux.h
@@ -187,7 +187,7 @@ int jffs2_do_fill_super(struct super_block *sb, void *data, int silent);
 void jffs2_gc_release_inode(struct jffs2_sb_info *c,
                             struct jffs2_inode_info *f);
 struct jffs2_inode_info *jffs2_gc_fetch_inode(struct jffs2_sb_info *c,
-                                              int inum, int nlink);
+                                              int inum, int unlinked);
 
 unsigned char *jffs2_gc_fetch_page(struct jffs2_sb_info *c,
                                    struct jffs2_inode_info *f,
diff --git a/fs/jffs2/readinode.c b/fs/jffs2/readinode.c
index 4cb4d76de07f..6ca08ad887c0 100644
--- a/fs/jffs2/readinode.c
+++ b/fs/jffs2/readinode.c
@@ -63,10 +63,11 @@ static int check_node_data(struct jffs2_sb_info *c, struct jffs2_tmp_dnode_info
         /* TODO: instead, incapsulate point() stuff to jffs2_flash_read(),
          * adding and jffs2_flash_read_end() interface. */
         if (c->mtd->point) {
-                err = c->mtd->point(c->mtd, ofs, len, &retlen, &buffer);
+                err = c->mtd->point(c->mtd, ofs, len, &retlen,
+                                    (void **)&buffer, NULL);
                 if (!err && retlen < len) {
                         JFFS2_WARNING("MTD point returned len too short: %zu instead of %u.\n", retlen, tn->csize);
-                        c->mtd->unpoint(c->mtd, buffer, ofs, retlen);
+                        c->mtd->unpoint(c->mtd, ofs, retlen);
                 } else if (err)
                         JFFS2_WARNING("MTD point failed: error code %d.\n", err);
                 else
@@ -100,7 +101,7 @@ static int check_node_data(struct jffs2_sb_info *c, struct jffs2_tmp_dnode_info
                 kfree(buffer);
 #ifndef __ECOS
         else
-                c->mtd->unpoint(c->mtd, buffer, ofs, len);
+                c->mtd->unpoint(c->mtd, ofs, len);
 #endif
 
         if (crc != tn->data_crc) {
@@ -136,7 +137,7 @@ free_out:
                 kfree(buffer);
 #ifndef __ECOS
         else
-                c->mtd->unpoint(c->mtd, buffer, ofs, len);
+                c->mtd->unpoint(c->mtd, ofs, len);
 #endif
         return err;
 }
@@ -1123,7 +1124,8 @@ static int jffs2_do_read_inode_internal(struct jffs2_sb_info *c,
         size_t retlen;
         int ret;
 
-        dbg_readinode("ino #%u nlink is %d\n", f->inocache->ino, f->inocache->nlink);
+        dbg_readinode("ino #%u pino/nlink is %d\n", f->inocache->ino,
+                      f->inocache->pino_nlink);
 
         memset(&rii, 0, sizeof(rii));
 
@@ -1358,7 +1360,7 @@ int jffs2_do_read_inode(struct jffs2_sb_info *c, struct jffs2_inode_info *f,
                 }
                 dbg_readinode("creating inocache for root inode\n");
                 memset(f->inocache, 0, sizeof(struct jffs2_inode_cache));
-                f->inocache->ino = f->inocache->nlink = 1;
+                f->inocache->ino = f->inocache->pino_nlink = 1;
                 f->inocache->nodes = (struct jffs2_raw_node_ref *)f->inocache;
                 f->inocache->state = INO_STATE_READING;
                 jffs2_add_ino_cache(c, f->inocache);
@@ -1401,7 +1403,7 @@ void jffs2_do_clear_inode(struct jffs2_sb_info *c, struct jffs2_inode_info *f)
         jffs2_clear_acl(f);
         jffs2_xattr_delete_inode(c, f->inocache);
         mutex_lock(&f->sem);
-        deleted = f->inocache && !f->inocache->nlink;
+        deleted = f->inocache && !f->inocache->pino_nlink;
 
         if (f->inocache && f->inocache->state != INO_STATE_CHECKING)
                 jffs2_set_inocache_state(c, f->inocache, INO_STATE_CLEARING);
diff --git a/fs/jffs2/scan.c b/fs/jffs2/scan.c
index 272872d27fd5..1d437de1e9a8 100644
--- a/fs/jffs2/scan.c
+++ b/fs/jffs2/scan.c
@@ -97,11 +97,12 @@ int jffs2_scan_medium(struct jffs2_sb_info *c)
         size_t pointlen;
 
         if (c->mtd->point) {
-                ret = c->mtd->point (c->mtd, 0, c->mtd->size, &pointlen, &flashbuf);
+                ret = c->mtd->point(c->mtd, 0, c->mtd->size, &pointlen,
+                                    (void **)&flashbuf, NULL);
                 if (!ret && pointlen < c->mtd->size) {
                         /* Don't muck about if it won't let us point to the whole flash */
                         D1(printk(KERN_DEBUG "MTD point returned len too short: 0x%zx\n", pointlen));
-                        c->mtd->unpoint(c->mtd, flashbuf, 0, pointlen);
+                        c->mtd->unpoint(c->mtd, 0, pointlen);
                         flashbuf = NULL;
                 }
                 if (ret)
@@ -267,7 +268,7 @@ int jffs2_scan_medium(struct jffs2_sb_info *c)
                 kfree(flashbuf);
 #ifndef __ECOS
         else
-                c->mtd->unpoint(c->mtd, flashbuf, 0, c->mtd->size);
+                c->mtd->unpoint(c->mtd, 0, c->mtd->size);
 #endif
         if (s)
                 kfree(s);
@@ -940,7 +941,7 @@ struct jffs2_inode_cache *jffs2_scan_make_ino_cache(struct jffs2_sb_info *c, uin
         ic->nodes = (void *)ic;
         jffs2_add_ino_cache(c, ic);
         if (ino == 1)
-                ic->nlink = 1;
+                ic->pino_nlink = 1;
         return ic;
 }
 
diff --git a/fs/jffs2/super.c b/fs/jffs2/super.c
index f3353df178e7..7da69eae49e4 100644
--- a/fs/jffs2/super.c
+++ b/fs/jffs2/super.c
@@ -31,11 +31,12 @@ static struct kmem_cache *jffs2_inode_cachep;
 
 static struct inode *jffs2_alloc_inode(struct super_block *sb)
 {
-        struct jffs2_inode_info *ei;
-        ei = (struct jffs2_inode_info *)kmem_cache_alloc(jffs2_inode_cachep, GFP_KERNEL);
-        if (!ei)
+        struct jffs2_inode_info *f;
+
+        f = kmem_cache_alloc(jffs2_inode_cachep, GFP_KERNEL);
+        if (!f)
                 return NULL;
-        return &ei->vfs_inode;
+        return &f->vfs_inode;
 }
 
 static void jffs2_destroy_inode(struct inode *inode)
@@ -45,10 +46,10 @@ static void jffs2_destroy_inode(struct inode *inode)
 
 static void jffs2_i_init_once(struct kmem_cache *cachep, void *foo)
 {
-        struct jffs2_inode_info *ei = (struct jffs2_inode_info *) foo;
+        struct jffs2_inode_info *f = foo;
 
-        mutex_init(&ei->sem);
-        inode_init_once(&ei->vfs_inode);
+        mutex_init(&f->sem);
+        inode_init_once(&f->vfs_inode);
 }
 
 static int jffs2_sync_fs(struct super_block *sb, int wait)
diff --git a/fs/jffs2/wbuf.c b/fs/jffs2/wbuf.c
index 8de52b607678..0e78b00035e4 100644
--- a/fs/jffs2/wbuf.c
+++ b/fs/jffs2/wbuf.c
@@ -494,7 +494,7 @@ static void jffs2_wbuf_recover(struct jffs2_sb_info *c)
                                 /* If it's an in-core inode, then we have to adjust any
                                    full_dirent or full_dnode structure to point to the
                                    new version instead of the old */
-                                f = jffs2_gc_fetch_inode(c, ic->ino, ic->nlink);
+                                f = jffs2_gc_fetch_inode(c, ic->ino, !ic->pino_nlink);
                                 if (IS_ERR(f)) {
                                         /* Should never happen; it _must_ be present */
                                         JFFS2_ERROR("Failed to iget() ino #%u, err %ld\n",
diff --git a/fs/jffs2/write.c b/fs/jffs2/write.c
index 665fce9797d3..ca29440e9435 100644
--- a/fs/jffs2/write.c
+++ b/fs/jffs2/write.c
@@ -19,7 +19,8 @@
 #include "compr.h"
 
 
-int jffs2_do_new_inode(struct jffs2_sb_info *c, struct jffs2_inode_info *f, uint32_t mode, struct jffs2_raw_inode *ri)
+int jffs2_do_new_inode(struct jffs2_sb_info *c, struct jffs2_inode_info *f,
+                       uint32_t mode, struct jffs2_raw_inode *ri)
 {
         struct jffs2_inode_cache *ic;
 
@@ -31,7 +32,7 @@ int jffs2_do_new_inode(struct jffs2_sb_info *c, struct jffs2_inode_info *f, uint
         memset(ic, 0, sizeof(*ic));
 
         f->inocache = ic;
-        f->inocache->nlink = 1;
+        f->inocache->pino_nlink = 1; /* Will be overwritten shortly for directories */
         f->inocache->nodes = (struct jffs2_raw_node_ref *)f->inocache;
         f->inocache->state = INO_STATE_PRESENT;
 
@@ -438,10 +439,10 @@ int jffs2_do_create(struct jffs2_sb_info *c, struct jffs2_inode_info *dir_f, str
         ret = jffs2_reserve_space(c, sizeof(*ri), &alloclen, ALLOC_NORMAL,
                                 JFFS2_SUMMARY_INODE_SIZE);
         D1(printk(KERN_DEBUG "jffs2_do_create(): reserved 0x%x bytes\n", alloclen));
-        if (ret) {
-                mutex_unlock(&f->sem);
+        if (ret)
                 return ret;
-        }
+
+        mutex_lock(&f->sem);
 
         ri->data_crc = cpu_to_je32(0);
         ri->node_crc = cpu_to_je32(crc32(0, ri, sizeof(*ri)-8));
@@ -635,9 +636,9 @@ int jffs2_do_unlink(struct jffs2_sb_info *c, struct jffs2_inode_info *dir_f,
                                         jffs2_mark_node_obsolete(c, fd->raw);
                                 jffs2_free_full_dirent(fd);
                         }
-                }
-
-                dead_f->inocache->nlink--;
+                        dead_f->inocache->pino_nlink = 0;
+                } else
+                        dead_f->inocache->pino_nlink--;
                 /* NB: Caller must set inode nlink if appropriate */
                 mutex_unlock(&dead_f->sem);
         }
diff --git a/fs/jffs2/xattr.c b/fs/jffs2/xattr.c
index 574cb7532d6c..082e844ab2db 100644
--- a/fs/jffs2/xattr.c
+++ b/fs/jffs2/xattr.c
@@ -592,7 +592,7 @@ void jffs2_xattr_delete_inode(struct jffs2_sb_info *c, struct jffs2_inode_cache
            When an inode with XATTR is removed, those XATTRs must be removed. */
         struct jffs2_xattr_ref *ref, *_ref;
 
-        if (!ic || ic->nlink > 0)
+        if (!ic || ic->pino_nlink > 0)
                 return;
 
         down_write(&c->xattr_sem);
@@ -829,7 +829,7 @@ void jffs2_build_xattr_subsystem(struct jffs2_sb_info *c)
                            ref->xd and ref->ic are not valid yet. */
                         xd = jffs2_find_xattr_datum(c, ref->xid);
                         ic = jffs2_get_ino_cache(c, ref->ino);
-                        if (!xd || !ic || !ic->nlink) {
+                        if (!xd || !ic || !ic->pino_nlink) {
                                 dbg_xattr("xref(ino=%u, xid=%u, xseqno=%u) is orphan.\n",
                                           ref->ino, ref->xid, ref->xseqno);
                                 ref->xseqno |= XREF_DELETE_MARKER;
diff --git a/fs/locks.c b/fs/locks.c
index 44d9a6a7ec50..663c069b59b3 100644
--- a/fs/locks.c
+++ b/fs/locks.c
@@ -116,6 +116,7 @@
 
 #include <linux/capability.h>
 #include <linux/file.h>
+#include <linux/fdtable.h>
 #include <linux/fs.h>
 #include <linux/init.h>
 #include <linux/module.h>
diff --git a/fs/ocfs2/cluster/sys.c b/fs/ocfs2/cluster/sys.c
index 98429fd68499..bc702dab5d1f 100644
--- a/fs/ocfs2/cluster/sys.c
+++ b/fs/ocfs2/cluster/sys.c
@@ -65,7 +65,7 @@ int o2cb_sys_init(void)
 {
         int ret;
 
-        o2cb_kset = kset_create_and_add("o2cb", NULL, NULL);
+        o2cb_kset = kset_create_and_add("o2cb", NULL, fs_kobj);
         if (!o2cb_kset)
                 return -ENOMEM;
 
diff --git a/fs/ocfs2/dlm/dlmdebug.c b/fs/ocfs2/dlm/dlmdebug.c
index 5f6d858770a2..1b81dcba175d 100644
--- a/fs/ocfs2/dlm/dlmdebug.c
+++ b/fs/ocfs2/dlm/dlmdebug.c
@@ -44,7 +44,8 @@
 #define MLOG_MASK_PREFIX ML_DLM
 #include "cluster/masklog.h"
 
-int stringify_lockname(const char *lockname, int locklen, char *buf, int len);
+static int stringify_lockname(const char *lockname, int locklen, char *buf,
+                              int len);
 
 void dlm_print_one_lock_resource(struct dlm_lock_resource *res)
 {
@@ -251,7 +252,8 @@ EXPORT_SYMBOL_GPL(dlm_errname);
  *
  * For more on lockname formats, please refer to dlmglue.c and ocfs2_lockid.h.
  */
-int stringify_lockname(const char *lockname, int locklen, char *buf, int len)
+static int stringify_lockname(const char *lockname, int locklen, char *buf,
+                              int len)
 {
         int out = 0;
         __be64 inode_blkno_be;
@@ -368,7 +370,7 @@ static void dlm_debug_free(struct kref *kref)
         kfree(dc);
 }
 
-void dlm_debug_put(struct dlm_debug_ctxt *dc)
+static void dlm_debug_put(struct dlm_debug_ctxt *dc)
 {
         if (dc)
                 kref_put(&dc->debug_refcnt, dlm_debug_free);
diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c
index 9154c82d3258..57e0d30cde98 100644
--- a/fs/ocfs2/file.c
+++ b/fs/ocfs2/file.c
@@ -1048,6 +1048,10 @@ int ocfs2_setattr(struct dentry *dentry, struct iattr *attr)
         mlog_entry("(0x%p, '%.*s')\n", dentry,
                    dentry->d_name.len, dentry->d_name.name);
 
+        /* ensuring we don't even attempt to truncate a symlink */
+        if (S_ISLNK(inode->i_mode))
+                attr->ia_valid &= ~ATTR_SIZE;
+
         if (attr->ia_valid & ATTR_MODE)
                 mlog(0, "mode change: %d\n", attr->ia_mode);
         if (attr->ia_valid & ATTR_UID)
diff --git a/fs/ocfs2/localalloc.c b/fs/ocfs2/localalloc.c
index ce0dc147602a..be774bdc8b36 100644
--- a/fs/ocfs2/localalloc.c
+++ b/fs/ocfs2/localalloc.c
@@ -260,7 +260,7 @@ void ocfs2_shutdown_local_alloc(struct ocfs2_super *osb)
         bh = osb->local_alloc_bh;
         alloc = (struct ocfs2_dinode *) bh->b_data;
 
-        alloc_copy = kmalloc(bh->b_size, GFP_KERNEL);
+        alloc_copy = kmalloc(bh->b_size, GFP_NOFS);
         if (!alloc_copy) {
                 status = -ENOMEM;
                 goto out_commit;
@@ -931,7 +931,7 @@ static int ocfs2_local_alloc_slide_window(struct ocfs2_super *osb,
          * local alloc shutdown won't try to double free main bitmap
          * bits. Make a copy so the sync function knows which bits to
          * free. */
-        alloc_copy = kmalloc(osb->local_alloc_bh->b_size, GFP_KERNEL);
+        alloc_copy = kmalloc(osb->local_alloc_bh->b_size, GFP_NOFS);
         if (!alloc_copy) {
                 status = -ENOMEM;
                 mlog_errno(status);
diff --git a/fs/ocfs2/stack_o2cb.c b/fs/ocfs2/stack_o2cb.c
index ac1d74c63bf5..bbd1667aa7d3 100644
--- a/fs/ocfs2/stack_o2cb.c
+++ b/fs/ocfs2/stack_o2cb.c
@@ -385,7 +385,7 @@ static int o2cb_cluster_this_node(unsigned int *node)
         return 0;
 }
 
-struct ocfs2_stack_operations o2cb_stack_ops = {
+static struct ocfs2_stack_operations o2cb_stack_ops = {
         .connect        = o2cb_cluster_connect,
         .disconnect     = o2cb_cluster_disconnect,
         .hangup         = o2cb_cluster_hangup,
diff --git a/fs/ocfs2/stack_user.c b/fs/ocfs2/stack_user.c
index 7428663f9cbb..b503772cd0ec 100644
--- a/fs/ocfs2/stack_user.c
+++ b/fs/ocfs2/stack_user.c
@@ -635,7 +635,7 @@ static const struct file_operations ocfs2_control_fops = {
         .owner   = THIS_MODULE,
 };
 
-struct miscdevice ocfs2_control_device = {
+static struct miscdevice ocfs2_control_device = {
         .minor          = MISC_DYNAMIC_MINOR,
         .name           = "ocfs2_control",
         .fops           = &ocfs2_control_fops,
diff --git a/fs/ocfs2/symlink.c b/fs/ocfs2/symlink.c
index 7134007ba22f..ba9dbb51d25b 100644
--- a/fs/ocfs2/symlink.c
+++ b/fs/ocfs2/symlink.c
@@ -167,9 +167,11 @@ const struct inode_operations ocfs2_symlink_inode_operations = {
         .readlink       = page_readlink,
         .follow_link    = ocfs2_follow_link,
         .getattr        = ocfs2_getattr,
+        .setattr        = ocfs2_setattr,
 };
 const struct inode_operations ocfs2_fast_symlink_inode_operations = {
         .readlink       = ocfs2_readlink,
         .follow_link    = ocfs2_follow_link,
         .getattr        = ocfs2_getattr,
+        .setattr        = ocfs2_setattr,
 };
diff --git a/fs/open.c b/fs/open.c
index 7af1f05d5978..a1450086e92f 100644
--- a/fs/open.c
+++ b/fs/open.c
@@ -7,6 +7,7 @@
 #include <linux/string.h>
 #include <linux/mm.h>
 #include <linux/file.h>
+#include <linux/fdtable.h>
 #include <linux/quotaops.h>
 #include <linux/fsnotify.h>
 #include <linux/module.h>
diff --git a/fs/pipe.c b/fs/pipe.c
index f73492b6817e..3499f9ff6316 100644
--- a/fs/pipe.c
+++ b/fs/pipe.c
@@ -1076,6 +1076,23 @@ int do_pipe(int *fd)
 }
 
 /*
+ * sys_pipe() is the normal C calling standard for creating
+ * a pipe. It's not the way Unix traditionally does this, though.
+ */
+asmlinkage long __weak sys_pipe(int __user *fildes)
+{
+        int fd[2];
+        int error;
+
+        error = do_pipe(fd);
+        if (!error) {
+                if (copy_to_user(fildes, fd, sizeof(fd)))
+                        error = -EFAULT;
+        }
+        return error;
+}
+
+/*
  * pipefs should _never_ be mounted by userland - too much of security hassle,
  * no real gain from having the whole whorehouse mounted. So we don't need
  * any operations on the root directory. However, we need a non-trivial
diff --git a/fs/proc/array.c b/fs/proc/array.c
index c135cbdd9127..dca997a93bff 100644
--- a/fs/proc/array.c
+++ b/fs/proc/array.c
@@ -73,6 +73,7 @@
 #include <linux/signal.h>
 #include <linux/highmem.h>
 #include <linux/file.h>
+#include <linux/fdtable.h>
 #include <linux/times.h>
 #include <linux/cpuset.h>
 #include <linux/rcupdate.h>
diff --git a/fs/proc/base.c b/fs/proc/base.c
index fcf02f2deeba..808cbdc193d3 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -56,6 +56,7 @@
 #include <linux/init.h>
 #include <linux/capability.h>
 #include <linux/file.h>
+#include <linux/fdtable.h>
 #include <linux/string.h>
 #include <linux/seq_file.h>
 #include <linux/namei.h>
diff --git a/fs/proc/task_nommu.c b/fs/proc/task_nommu.c
index 4b733f108455..4b4f9cc2f186 100644
--- a/fs/proc/task_nommu.c
+++ b/fs/proc/task_nommu.c
@@ -1,6 +1,7 @@
 
 #include <linux/mm.h>
 #include <linux/file.h>
+#include <linux/fdtable.h>
 #include <linux/mount.h>
 #include <linux/ptrace.h>
 #include <linux/seq_file.h>
diff --git a/fs/select.c b/fs/select.c
index 2c292146e246..8dda969614a9 100644
--- a/fs/select.c
+++ b/fs/select.c
@@ -21,6 +21,7 @@
 #include <linux/poll.h>
 #include <linux/personality.h> /* for STICKY_TIMEOUTS */
 #include <linux/file.h>
+#include <linux/fdtable.h>
 #include <linux/fs.h>
 #include <linux/rcupdate.h>
 
@@ -298,7 +299,7 @@ int do_select(int n, fd_set_bits *fds, s64 *timeout)
 #define MAX_SELECT_SECONDS \
         ((unsigned long) (MAX_SCHEDULE_TIMEOUT / HZ)-1)
 
-static int core_sys_select(int n, fd_set __user *inp, fd_set __user *outp,
+int core_sys_select(int n, fd_set __user *inp, fd_set __user *outp,
                            fd_set __user *exp, s64 *timeout)
 {
         fd_set_bits fds;
diff --git a/fs/signalfd.c b/fs/signalfd.c
index 8ead0db35933..619725644c75 100644
--- a/fs/signalfd.c
+++ b/fs/signalfd.c
@@ -207,11 +207,8 @@ static const struct file_operations signalfd_fops = {
 
 asmlinkage long sys_signalfd(int ufd, sigset_t __user *user_mask, size_t sizemask)
 {
-        int error;
         sigset_t sigmask;
         struct signalfd_ctx *ctx;
-        struct file *file;
-        struct inode *inode;
 
         if (sizemask != sizeof(sigset_t) ||
             copy_from_user(&sigmask, user_mask, sizeof(sigmask)))
@@ -230,12 +227,11 @@ asmlinkage long sys_signalfd(int ufd, sigset_t __user *user_mask, size_t sizemas
                  * When we call this, the initialization must be complete, since
                  * anon_inode_getfd() will install the fd.
                  */
-                error = anon_inode_getfd(&ufd, &inode, &file, "[signalfd]",
-                                         &signalfd_fops, ctx);
-                if (error)
-                        goto err_fdalloc;
+                ufd = anon_inode_getfd("[signalfd]", &signalfd_fops, ctx);
+                if (ufd < 0)
+                        kfree(ctx);
         } else {
-                file = fget(ufd);
+                struct file *file = fget(ufd);
                 if (!file)
                         return -EBADF;
                 ctx = file->private_data;
@@ -252,9 +248,4 @@ asmlinkage long sys_signalfd(int ufd, sigset_t __user *user_mask, size_t sizemas
         }
 
         return ufd;
-
-err_fdalloc:
-        kfree(ctx);
-        return error;
 }
-
diff --git a/fs/timerfd.c b/fs/timerfd.c
index 5400524e9cb1..d87d354ec424 100644
--- a/fs/timerfd.c
+++ b/fs/timerfd.c
@@ -181,10 +181,8 @@ static struct file *timerfd_fget(int fd)
 
 asmlinkage long sys_timerfd_create(int clockid, int flags)
 {
-        int error, ufd;
+        int ufd;
         struct timerfd_ctx *ctx;
-        struct file *file;
-        struct inode *inode;
 
         if (flags)
                 return -EINVAL;
@@ -200,12 +198,9 @@ asmlinkage long sys_timerfd_create(int clockid, int flags)
         ctx->clockid = clockid;
         hrtimer_init(&ctx->tmr, clockid, HRTIMER_MODE_ABS);
 
-        error = anon_inode_getfd(&ufd, &inode, &file, "[timerfd]",
-                                 &timerfd_fops, ctx);
-        if (error) {
+        ufd = anon_inode_getfd("[timerfd]", &timerfd_fops, ctx);
+        if (ufd < 0)
                 kfree(ctx);
-                return error;
-        }
 
         return ufd;
 }
diff --git a/fs/utimes.c b/fs/utimes.c
index a2bef77dc9c9..af059d5cb485 100644
--- a/fs/utimes.c
+++ b/fs/utimes.c
@@ -40,9 +40,14 @@ asmlinkage long sys_utime(char __user *filename, struct utimbuf __user *times)
 
 #endif
 
+static bool nsec_special(long nsec)
+{
+        return nsec == UTIME_OMIT || nsec == UTIME_NOW;
+}
+
 static bool nsec_valid(long nsec)
 {
-        if (nsec == UTIME_OMIT || nsec == UTIME_NOW)
+        if (nsec_special(nsec))
                 return true;
 
         return nsec >= 0 && nsec <= 999999999;
@@ -119,7 +124,15 @@ long do_utimes(int dfd, char __user *filename, struct timespec *times, int flags
                         newattrs.ia_mtime.tv_nsec = times[1].tv_nsec;
                         newattrs.ia_valid |= ATTR_MTIME_SET;
                 }
-        } else {
+        }
+
+        /*
+         * If times is NULL or both times are either UTIME_OMIT or
+         * UTIME_NOW, then need to check permissions, because
+         * inode_change_ok() won't do it.
+         */
+        if (!times || (nsec_special(times[0].tv_nsec) &&
+                       nsec_special(times[1].tv_nsec))) {
                 error = -EACCES;
                 if (IS_IMMUTABLE(inode))
                         goto mnt_drop_write_and_out;
diff --git a/include/asm-alpha/types.h b/include/asm-alpha/types.h
index f5716139ec89..c1541353ccef 100644
--- a/include/asm-alpha/types.h
+++ b/include/asm-alpha/types.h
@@ -8,28 +8,12 @@
  * not a major issue.  However, for interoperability, libraries still
  * need to be careful to avoid a name clashes.
  */
+#include <asm-generic/int-l64.h>
 
 #ifndef __ASSEMBLY__
 
 typedef unsigned int umode_t;
 
-/*
- * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
- * header files exported to user space
- */
-
-typedef __signed__ char __s8;
-typedef unsigned char __u8;
-
-typedef __signed__ short __s16;
-typedef unsigned short __u16;
-
-typedef __signed__ int __s32;
-typedef unsigned int __u32;
-
-typedef __signed__ long __s64;
-typedef unsigned long __u64;
-
 #endif /* __ASSEMBLY__ */
 
 /*
@@ -41,18 +25,6 @@ typedef unsigned long __u64;
 
 #ifndef __ASSEMBLY__
 
-typedef signed char s8;
-typedef unsigned char u8;
-
-typedef signed short s16;
-typedef unsigned short u16;
-
-typedef signed int s32;
-typedef unsigned int u32;
-
-typedef signed long s64;
-typedef unsigned long u64;
-
 typedef u64 dma_addr_t;
 typedef u64 dma64_addr_t;
 
diff --git a/include/asm-arm/div64.h b/include/asm-arm/div64.h
index 0b5f881c3d85..5001390be958 100644
--- a/include/asm-arm/div64.h
+++ b/include/asm-arm/div64.h
@@ -224,6 +224,4 @@
 
 #endif
 
-extern uint64_t div64_64(uint64_t dividend, uint64_t divisor);
-
 #endif
diff --git a/include/asm-arm/types.h b/include/asm-arm/types.h
index 3141451a9bd6..345df01534a4 100644
--- a/include/asm-arm/types.h
+++ b/include/asm-arm/types.h
@@ -1,29 +1,12 @@
 #ifndef __ASM_ARM_TYPES_H
 #define __ASM_ARM_TYPES_H
 
+#include <asm-generic/int-ll64.h>
+
 #ifndef __ASSEMBLY__
 
 typedef unsigned short umode_t;
 
-/*
- * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
- * header files exported to user space
- */
-
-typedef __signed__ char __s8;
-typedef unsigned char __u8;
-
-typedef __signed__ short __s16;
-typedef unsigned short __u16;
-
-typedef __signed__ int __s32;
-typedef unsigned int __u32;
-
-#if defined(__GNUC__)
-__extension__ typedef __signed__ long long __s64;
-__extension__ typedef unsigned long long __u64;
-#endif
-
 #endif /* __ASSEMBLY__ */
 
 /*
@@ -35,18 +18,6 @@ __extension__ typedef unsigned long long __u64;
 
 #ifndef __ASSEMBLY__
 
-typedef signed char s8;
-typedef unsigned char u8;
-
-typedef signed short s16;
-typedef unsigned short u16;
-
-typedef signed int s32;
-typedef unsigned int u32;
-
-typedef signed long long s64;
-typedef unsigned long long u64;
-
 /* Dma addresses are 32-bits wide.  */
 
 typedef u32 dma_addr_t;
diff --git a/include/asm-avr32/types.h b/include/asm-avr32/types.h
index 8999a3819403..9cefda6f534a 100644
--- a/include/asm-avr32/types.h
+++ b/include/asm-avr32/types.h
@@ -8,28 +8,12 @@
 #ifndef __ASM_AVR32_TYPES_H
 #define __ASM_AVR32_TYPES_H
 
+#include <asm-generic/int-ll64.h>
+
 #ifndef __ASSEMBLY__
 
 typedef unsigned short umode_t;
 
-/*
- * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
- * header files exported to user space
- */
-typedef __signed__ char __s8;
-typedef unsigned char __u8;
-
-typedef __signed__ short __s16;
-typedef unsigned short __u16;
-
-typedef __signed__ int __s32;
-typedef unsigned int __u32;
-
-#if defined(__GNUC__)
-__extension__ typedef __signed__ long long __s64;
-__extension__ typedef unsigned long long __u64;
-#endif
-
 #endif /* __ASSEMBLY__ */
 
 /*
@@ -41,18 +25,6 @@ __extension__ typedef unsigned long long __u64;
 
 #ifndef __ASSEMBLY__
 
-typedef signed char s8;
-typedef unsigned char u8;
-
-typedef signed short s16;
-typedef unsigned short u16;
-
-typedef signed int s32;
-typedef unsigned int u32;
-
-typedef signed long long s64;
-typedef unsigned long long u64;
-
 /* Dma addresses are 32-bits wide.  */
 
 typedef u32 dma_addr_t;
diff --git a/include/asm-blackfin/types.h b/include/asm-blackfin/types.h
index 9785a6d531c6..8441cbc2bf9e 100644
--- a/include/asm-blackfin/types.h
+++ b/include/asm-blackfin/types.h
@@ -8,30 +8,12 @@
  * not a major issue.  However, for interoperability, libraries still
  * need to be careful to avoid a name clashes.
  */
+#include <asm-generic/int-ll64.h>
+
 #ifndef __ASSEMBLY__
 
 typedef unsigned short umode_t;
 
-/*
- * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
- * header files exported to user space
- */
-
-typedef __signed__ char __s8;
-typedef unsigned char __u8;
-
-typedef __signed__ short __s16;
-typedef unsigned short __u16;
-
-typedef __signed__ int __s32;
-typedef unsigned int __u32;
-
-/* HK0617   -- Changes to unsigned long temporarily */
-#if defined(__GNUC__)
-__extension__ typedef __signed__ long long __s64;
-__extension__ typedef unsigned long long __u64;
-#endif
-
 #endif                          /* __ASSEMBLY__ */
 /*
  * These aren't exported outside the kernel to avoid name space clashes
@@ -42,18 +24,6 @@ __extension__ typedef unsigned long long __u64;
 
 #ifndef __ASSEMBLY__
 
-typedef signed char s8;
-typedef unsigned char u8;
-
-typedef signed short s16;
-typedef unsigned short u16;
-
-typedef signed int s32;
-typedef unsigned int u32;
-
-typedef signed long long s64;
-typedef unsigned long long u64;
-
 /* Dma addresses are 32-bits wide.  */
 
 typedef u32 dma_addr_t;
diff --git a/include/asm-cris/types.h b/include/asm-cris/types.h
index 5a21c42bc6c5..5790262cbe8a 100644
--- a/include/asm-cris/types.h
+++ b/include/asm-cris/types.h
@@ -1,29 +1,12 @@
 #ifndef _ETRAX_TYPES_H
 #define _ETRAX_TYPES_H
 
+#include <asm-generic/int-ll64.h>
+
 #ifndef __ASSEMBLY__
 
 typedef unsigned short umode_t;
 
-/*
- * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
- * header files exported to user space
- */
-
-typedef __signed__ char __s8;
-typedef unsigned char __u8;
-
-typedef __signed__ short __s16;
-typedef unsigned short __u16;
-
-typedef __signed__ int __s32;
-typedef unsigned int __u32;
-
-#if defined(__GNUC__)
-__extension__ typedef __signed__ long long __s64;
-__extension__ typedef unsigned long long __u64;
-#endif
-
 #endif /* __ASSEMBLY__ */
 
 /*
@@ -35,18 +18,6 @@ __extension__ typedef unsigned long long __u64;
 
 #ifndef __ASSEMBLY__
 
-typedef signed char s8;
-typedef unsigned char u8;
-
-typedef signed short s16;
-typedef unsigned short u16;
-
-typedef signed int s32;
-typedef unsigned int u32;
-
-typedef signed long long s64;
-typedef unsigned long long u64;
-
 /* Dma addresses are 32-bits wide, just like our other addresses.  */
  
 typedef u32 dma_addr_t;
diff --git a/include/asm-frv/types.h b/include/asm-frv/types.h
index 767e5ed71c4b..613bf1e962f0 100644
--- a/include/asm-frv/types.h
+++ b/include/asm-frv/types.h
@@ -12,29 +12,12 @@
 #ifndef _ASM_TYPES_H
 #define _ASM_TYPES_H
 
+#include <asm-generic/int-ll64.h>
+
 #ifndef __ASSEMBLY__
 
 typedef unsigned short umode_t;
 
-/*
- * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
- * header files exported to user space
- */
-
-typedef __signed__ char __s8;
-typedef unsigned char __u8;
-
-typedef __signed__ short __s16;
-typedef unsigned short __u16;
-
-typedef __signed__ int __s32;
-typedef unsigned int __u32;
-
-#if defined(__GNUC__)
-__extension__ typedef __signed__ long long __s64;
-__extension__ typedef unsigned long long __u64;
-#endif
-
 #endif /* __ASSEMBLY__ */
 
 /*
@@ -46,19 +29,6 @@ __extension__ typedef unsigned long long __u64;
 
 #ifndef __ASSEMBLY__
 
-
-typedef signed char s8;
-typedef unsigned char u8;
-
-typedef signed short s16;
-typedef unsigned short u16;
-
-typedef signed int s32;
-typedef unsigned int u32;
-
-typedef signed long long s64;
-typedef unsigned long long u64;
-
 /* Dma addresses are 32-bits wide.  */
 
 typedef u32 dma_addr_t;
diff --git a/include/asm-frv/unaligned.h b/include/asm-frv/unaligned.h
index 64ccc736f2d8..839a2fbffa0f 100644
--- a/include/asm-frv/unaligned.h
+++ b/include/asm-frv/unaligned.h
@@ -9,8 +9,8 @@
  * 2 of the License, or (at your option) any later version.
  */
 
-#ifndef _ASM_FRV_UNALIGNED_H
-#define _ASM_FRV_UNALIGNED_H
+#ifndef _ASM_UNALIGNED_H
+#define _ASM_UNALIGNED_H
 
 #include <linux/unaligned/le_byteshift.h>
 #include <linux/unaligned/be_byteshift.h>
@@ -19,4 +19,4 @@
 #define get_unaligned   __get_unaligned_be
 #define put_unaligned   __put_unaligned_be
 
-#endif /* _ASM_FRV_UNALIGNED_H */
+#endif /* _ASM_UNALIGNED_H */
diff --git a/include/asm-generic/Kbuild b/include/asm-generic/Kbuild
index c18110ee30f1..4c9932a2503f 100644
--- a/include/asm-generic/Kbuild
+++ b/include/asm-generic/Kbuild
@@ -7,5 +7,7 @@ header-y += poll.h
 header-y += signal.h
 header-y += statfs.h
 
+unifdef-y += int-l64.h
+unifdef-y += int-ll64.h
 unifdef-y += resource.h
 unifdef-y += siginfo.h
diff --git a/include/asm-generic/div64.h b/include/asm-generic/div64.h
index a4a49370793c..8f4e3193342e 100644
--- a/include/asm-generic/div64.h
+++ b/include/asm-generic/div64.h
@@ -30,11 +30,6 @@
         __rem;                                                  \
  })
 
-static inline uint64_t div64_64(uint64_t dividend, uint64_t divisor)
-{
-        return dividend / divisor;
-}
-
 #elif BITS_PER_LONG == 32
 
 extern uint32_t __div64_32(uint64_t *dividend, uint32_t divisor);
@@ -54,8 +49,6 @@ extern uint32_t __div64_32(uint64_t *dividend, uint32_t divisor);
         __rem;                                          \
  })
 
-extern uint64_t div64_64(uint64_t dividend, uint64_t divisor);
-
 #else /* BITS_PER_LONG == ?? */
 
 # error do_div() does not yet support the C64
diff --git a/include/asm-generic/int-l64.h b/include/asm-generic/int-l64.h
new file mode 100644
index 000000000000..2af9b75d77db
--- /dev/null
+++ b/include/asm-generic/int-l64.h
@@ -0,0 +1,71 @@
+/*
+ * asm-generic/int-l64.h
+ *
+ * Integer declarations for architectures which use "long"
+ * for 64-bit types.
+ */
+
+#ifndef _ASM_GENERIC_INT_L64_H
+#define _ASM_GENERIC_INT_L64_H
+
+#ifndef __ASSEMBLY__
+/*
+ * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
+ * header files exported to user space
+ */
+
+typedef __signed__ char __s8;
+typedef unsigned char __u8;
+
+typedef __signed__ short __s16;
+typedef unsigned short __u16;
+
+typedef __signed__ int __s32;
+typedef unsigned int __u32;
+
+typedef __signed__ long __s64;
+typedef unsigned long __u64;
+
+#endif /* __ASSEMBLY__ */
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+
+typedef signed char s8;
+typedef unsigned char u8;
+
+typedef signed short s16;
+typedef unsigned short u16;
+
+typedef signed int s32;
+typedef unsigned int u32;
+
+typedef signed long s64;
+typedef unsigned long u64;
+
+#define S8_C(x)  x
+#define U8_C(x)  x ## U
+#define S16_C(x) x
+#define U16_C(x) x ## U
+#define S32_C(x) x
+#define U32_C(x) x ## U
+#define S64_C(x) x ## L
+#define U64_C(x) x ## UL
+
+#else /* __ASSEMBLY__ */
+
+#define S8_C(x)  x
+#define U8_C(x)  x
+#define S16_C(x) x
+#define U16_C(x) x
+#define S32_C(x) x
+#define U32_C(x) x
+#define S64_C(x) x
+#define U64_C(x) x
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_GENERIC_INT_L64_H */
diff --git a/include/asm-generic/int-ll64.h b/include/asm-generic/int-ll64.h
new file mode 100644
index 000000000000..260948905e4e
--- /dev/null
+++ b/include/asm-generic/int-ll64.h
@@ -0,0 +1,76 @@
+/*
+ * asm-generic/int-ll64.h
+ *
+ * Integer declarations for architectures which use "long long"
+ * for 64-bit types.
+ */
+
+#ifndef _ASM_GENERIC_INT_LL64_H
+#define _ASM_GENERIC_INT_LL64_H
+
+#ifndef __ASSEMBLY__
+/*
+ * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
+ * header files exported to user space
+ */
+
+typedef __signed__ char __s8;
+typedef unsigned char __u8;
+
+typedef __signed__ short __s16;
+typedef unsigned short __u16;
+
+typedef __signed__ int __s32;
+typedef unsigned int __u32;
+
+#ifdef __GNUC__
+__extension__ typedef __signed__ long long __s64;
+__extension__ typedef unsigned long long __u64;
+#elif defined(__STDC_VERSION__) && __STDC_VERSION__ >= 199901L
+typedef __signed__ long long __s64;
+typedef unsigned long long __u64;
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+
+typedef signed char s8;
+typedef unsigned char u8;
+
+typedef signed short s16;
+typedef unsigned short u16;
+
+typedef signed int s32;
+typedef unsigned int u32;
+
+typedef signed long long s64;
+typedef unsigned long long u64;
+
+#define S8_C(x)  x
+#define U8_C(x)  x ## U
+#define S16_C(x) x
+#define U16_C(x) x ## U
+#define S32_C(x) x
+#define U32_C(x) x ## U
+#define S64_C(x) x ## LL
+#define U64_C(x) x ## ULL
+
+#else /* __ASSEMBLY__ */
+
+#define S8_C(x)  x
+#define U8_C(x)  x
+#define S16_C(x) x
+#define U16_C(x) x
+#define S32_C(x) x
+#define U32_C(x) x
+#define S64_C(x) x
+#define U64_C(x) x
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_GENERIC_INT_LL64_H */
diff --git a/include/asm-h8300/types.h b/include/asm-h8300/types.h
index 56566e2a09fd..12875190b156 100644
--- a/include/asm-h8300/types.h
+++ b/include/asm-h8300/types.h
@@ -1,6 +1,8 @@
 #ifndef _H8300_TYPES_H
 #define _H8300_TYPES_H
 
+#include <asm-generic/int-ll64.h>
+
 #if !defined(__ASSEMBLY__)
 
 /*
@@ -14,41 +16,10 @@
 typedef unsigned short umode_t;
 
 /*
- * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
- * header files exported to user space
- */
-
-typedef __signed__ char __s8;
-typedef unsigned char __u8;
-
-typedef __signed__ short __s16;
-typedef unsigned short __u16;
-
-typedef __signed__ int __s32;
-typedef unsigned int __u32;
-
-#if defined(__GNUC__)
-__extension__ typedef __signed__ long long __s64;
-__extension__ typedef unsigned long long __u64;
-#endif
-
-/*
  * These aren't exported outside the kernel to avoid name space clashes
  */
 #ifdef __KERNEL__
 
-typedef signed char s8;
-typedef unsigned char u8;
-
-typedef signed short s16;
-typedef unsigned short u16;
-
-typedef signed int s32;
-typedef unsigned int u32;
-
-typedef signed long long s64;
-typedef unsigned long long u64;
-
 #define BITS_PER_LONG 32
 
 /* Dma addresses are 32-bits wide.  */
diff --git a/include/asm-ia64/cpu.h b/include/asm-ia64/cpu.h
index e87fa3210a2b..fcca30b9f110 100644
--- a/include/asm-ia64/cpu.h
+++ b/include/asm-ia64/cpu.h
@@ -14,8 +14,8 @@ DECLARE_PER_CPU(struct ia64_cpu, cpu_devices);
 
 DECLARE_PER_CPU(int, cpu_state);
 
-extern int arch_register_cpu(int num);
 #ifdef CONFIG_HOTPLUG_CPU
+extern int arch_register_cpu(int num);
 extern void arch_unregister_cpu(int);
 #endif
 
diff --git a/include/asm-ia64/dmi.h b/include/asm-ia64/dmi.h
index f3efaa229525..00eb1b130b63 100644
--- a/include/asm-ia64/dmi.h
+++ b/include/asm-ia64/dmi.h
@@ -3,4 +3,9 @@
 
 #include <asm/io.h>
 
+/* Use normal IO mappings for DMI */
+#define dmi_ioremap ioremap
+#define dmi_iounmap(x,l) iounmap(x)
+#define dmi_alloc(l) kmalloc(l, GFP_ATOMIC)
+
 #endif
diff --git a/include/asm-ia64/io.h b/include/asm-ia64/io.h
index 4ebed77aa472..260a85ac9d6a 100644
--- a/include/asm-ia64/io.h
+++ b/include/asm-ia64/io.h
@@ -423,11 +423,6 @@ extern void __iomem * ioremap(unsigned long offset, unsigned long size);
 extern void __iomem * ioremap_nocache (unsigned long offset, unsigned long size);
 extern void iounmap (volatile void __iomem *addr);
 
-/* Use normal IO mappings for DMI */
-#define dmi_ioremap ioremap
-#define dmi_iounmap(x,l) iounmap(x)
-#define dmi_alloc(l) kmalloc(l, GFP_ATOMIC)
-
 /*
  * String version of IO memory access ops:
  */
diff --git a/include/asm-ia64/thread_info.h b/include/asm-ia64/thread_info.h
index f30e05583869..2422ac61658a 100644
--- a/include/asm-ia64/thread_info.h
+++ b/include/asm-ia64/thread_info.h
@@ -108,13 +108,11 @@ extern void tsk_clear_notify_resume(struct task_struct *tsk);
 #define TIF_DB_DISABLED         19      /* debug trap disabled for fsyscall */
 #define TIF_FREEZE              20      /* is freezing for suspend */
 #define TIF_RESTORE_RSE         21      /* user RBS is newer than kernel RBS */
-#define TIF_RESTORE_SIGMASK     22      /* restore signal mask in do_signal() */
 
 #define _TIF_SYSCALL_TRACE      (1 << TIF_SYSCALL_TRACE)
 #define _TIF_SYSCALL_AUDIT      (1 << TIF_SYSCALL_AUDIT)
 #define _TIF_SINGLESTEP         (1 << TIF_SINGLESTEP)
 #define _TIF_SYSCALL_TRACEAUDIT (_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP)
-#define _TIF_RESTORE_SIGMASK    (1 << TIF_RESTORE_SIGMASK)
 #define _TIF_NOTIFY_RESUME      (1 << TIF_NOTIFY_RESUME)
 #define _TIF_SIGPENDING         (1 << TIF_SIGPENDING)
 #define _TIF_NEED_RESCHED       (1 << TIF_NEED_RESCHED)
@@ -131,7 +129,18 @@ extern void tsk_clear_notify_resume(struct task_struct *tsk);
 #define TIF_WORK_MASK           (TIF_ALLWORK_MASK&~(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT))
 
 #define TS_POLLING              1       /* true if in idle loop and not sleeping */
+#define TS_RESTORE_SIGMASK      2       /* restore signal mask in do_signal() */
 
 #define tsk_is_polling(t) (task_thread_info(t)->status & TS_POLLING)
 
+#ifndef __ASSEMBLY__
+#define HAVE_SET_RESTORE_SIGMASK        1
+static inline void set_restore_sigmask(void)
+{
+        struct thread_info *ti = current_thread_info();
+        ti->status |= TS_RESTORE_SIGMASK;
+        set_bit(TIF_SIGPENDING, &ti->flags);
+}
+#endif  /* !__ASSEMBLY__ */
+
 #endif /* _ASM_IA64_THREAD_INFO_H */
diff --git a/include/asm-ia64/types.h b/include/asm-ia64/types.h
index 902850d12424..e36b3716e718 100644
--- a/include/asm-ia64/types.h
+++ b/include/asm-ia64/types.h
@@ -13,6 +13,8 @@
  *      David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
  */
 
+#include <asm-generic/int-l64.h>
+
 #ifdef __ASSEMBLY__
 # define __IA64_UL(x)           (x)
 # define __IA64_UL_CONST(x)     x
@@ -28,39 +30,10 @@
 typedef unsigned int umode_t;
 
 /*
- * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
- * header files exported to user space
- */
-
-typedef __signed__ char __s8;
-typedef unsigned char __u8;
-
-typedef __signed__ short __s16;
-typedef unsigned short __u16;
-
-typedef __signed__ int __s32;
-typedef unsigned int __u32;
-
-typedef __signed__ long __s64;
-typedef unsigned long __u64;
-
-/*
  * These aren't exported outside the kernel to avoid name space clashes
  */
 # ifdef __KERNEL__
 
-typedef __s8 s8;
-typedef __u8 u8;
-
-typedef __s16 s16;
-typedef __u16 u16;
-
-typedef __s32 s32;
-typedef __u32 u32;
-
-typedef __s64 s64;
-typedef __u64 u64;
-
 #define BITS_PER_LONG 64
 
 /* DMA addresses are 64-bits wide, in general.  */
diff --git a/include/asm-m32r/types.h b/include/asm-m32r/types.h
index b64c16639a7b..bc9f7fff0ac3 100644
--- a/include/asm-m32r/types.h
+++ b/include/asm-m32r/types.h
@@ -1,28 +1,12 @@
 #ifndef _ASM_M32R_TYPES_H
 #define _ASM_M32R_TYPES_H
 
+#include <asm-generic/int-ll64.h>
+
 #ifndef __ASSEMBLY__
 
 typedef unsigned short umode_t;
 
-/*
- * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
- * header files exported to user space
- */
-
-typedef __signed__ char __s8;
-typedef unsigned char __u8;
-
-typedef __signed__ short __s16;
-typedef unsigned short __u16;
-
-typedef __signed__ int __s32;
-typedef unsigned int __u32;
-
-#if defined(__GNUC__)
-__extension__ typedef __signed__ long long __s64;
-__extension__ typedef unsigned long long __u64;
-#endif
 #endif /* __ASSEMBLY__ */
 
 /*
@@ -34,18 +18,6 @@ __extension__ typedef unsigned long long __u64;
 
 #ifndef __ASSEMBLY__
 
-typedef signed char s8;
-typedef unsigned char u8;
-
-typedef signed short s16;
-typedef unsigned short u16;
-
-typedef signed int s32;
-typedef unsigned int u32;
-
-typedef signed long long s64;
-typedef unsigned long long u64;
-
 /* DMA addresses are 32-bits wide.  */
 
 typedef u32 dma_addr_t;
diff --git a/include/asm-m68k/div64.h b/include/asm-m68k/div64.h
index 33caad1628d4..8243c931b5c0 100644
--- a/include/asm-m68k/div64.h
+++ b/include/asm-m68k/div64.h
@@ -25,5 +25,4 @@
         __rem;                                                  \
 })
 
-extern uint64_t div64_64(uint64_t dividend, uint64_t divisor);
 #endif /* _M68K_DIV64_H */
diff --git a/include/asm-m68k/machw.h b/include/asm-m68k/machw.h
index d2e0e25d5c90..35624998291c 100644
--- a/include/asm-m68k/machw.h
+++ b/include/asm-m68k/machw.h
@@ -66,36 +66,6 @@ struct MAC_SCC
 # define mac_scc ((*(volatile struct SCC*)MAC_SCC_BAS))
 #endif
 
-/* hardware stuff */
-
-#define MACHW_DECLARE(name)     unsigned name : 1
-#define MACHW_SET(name)         (mac_hw_present.name = 1)
-#define MACHW_PRESENT(name)     (mac_hw_present.name)
-
-struct mac_hw_present {
-  /* video hardware */
-  /* sound hardware */
-  /* disk storage interfaces */
-  MACHW_DECLARE(MAC_SCSI_80);     /* Directly mapped NCR5380 */
-  MACHW_DECLARE(MAC_SCSI_96);     /* 53c9[46] */
-  MACHW_DECLARE(MAC_SCSI_96_2);   /* 2nd 53c9[46] Q900 and Q950 */
-  MACHW_DECLARE(IDE);             /* IDE Interface */
-  /* other I/O hardware */
-  MACHW_DECLARE(SCC);             /* Serial Communications Contr. */
-  /* DMA */
-  MACHW_DECLARE(SCSI_DMA);        /* DMA for the NCR5380 */
-  /* real time clocks */
-  MACHW_DECLARE(RTC_CLK);         /* clock chip */
-  /* supporting hardware */
-  MACHW_DECLARE(VIA1);            /* Versatile Interface Ad. 1 */
-  MACHW_DECLARE(VIA2);            /* Versatile Interface Ad. 2 */
-  MACHW_DECLARE(RBV);             /* Versatile Interface Ad. 2+ */
-  /* NUBUS */
-  MACHW_DECLARE(NUBUS);           /* NUBUS */
-};
-
-extern struct mac_hw_present mac_hw_present;
-
 #endif /* __ASSEMBLY__ */
 
 #endif /* linux/machw.h */
diff --git a/include/asm-m68k/types.h b/include/asm-m68k/types.h
index c35c09d93b66..6441cb5f8e7c 100644
--- a/include/asm-m68k/types.h
+++ b/include/asm-m68k/types.h
@@ -8,30 +8,12 @@
  * not a major issue.  However, for interoperability, libraries still
  * need to be careful to avoid a name clashes.
  */
+#include <asm-generic/int-ll64.h>
 
 #ifndef __ASSEMBLY__
 
 typedef unsigned short umode_t;
 
-/*
- * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
- * header files exported to user space
- */
-
-typedef __signed__ char __s8;
-typedef unsigned char __u8;
-
-typedef __signed__ short __s16;
-typedef unsigned short __u16;
-
-typedef __signed__ int __s32;
-typedef unsigned int __u32;
-
-#if defined(__GNUC__)
-__extension__ typedef __signed__ long long __s64;
-__extension__ typedef unsigned long long __u64;
-#endif
-
 #endif /* __ASSEMBLY__ */
 
 /*
@@ -43,18 +25,6 @@ __extension__ typedef unsigned long long __u64;
 
 #ifndef __ASSEMBLY__
 
-typedef signed char s8;
-typedef unsigned char u8;
-
-typedef signed short s16;
-typedef unsigned short u16;
-
-typedef signed int s32;
-typedef unsigned int u32;
-
-typedef signed long long s64;
-typedef unsigned long long u64;
-
 /* DMA addresses are always 32-bits wide */
 
 typedef u32 dma_addr_t;
diff --git a/include/asm-m68knommu/dma.h b/include/asm-m68knommu/dma.h
index 3f20419c633a..939a02056217 100644
--- a/include/asm-m68knommu/dma.h
+++ b/include/asm-m68knommu/dma.h
@@ -35,7 +35,8 @@
 /*
  * Set number of channels of DMA on ColdFire for different implementations.
  */
-#if defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407)
+#if defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407) || \
+        defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
 #define MAX_M68K_DMA_CHANNELS 4
 #elif defined(CONFIG_M5272)
 #define MAX_M68K_DMA_CHANNELS 1
diff --git a/include/asm-m68knommu/param.h b/include/asm-m68knommu/param.h
index 96c451018324..6044397adb64 100644
--- a/include/asm-m68knommu/param.h
+++ b/include/asm-m68knommu/param.h
@@ -1,13 +1,16 @@
 #ifndef _M68KNOMMU_PARAM_H
 #define _M68KNOMMU_PARAM_H
 
-#define HZ CONFIG_HZ
-
 #ifdef __KERNEL__
+#define HZ CONFIG_HZ
 #define USER_HZ         HZ
 #define CLOCKS_PER_SEC  (USER_HZ)
 #endif
 
+#ifndef HZ
+#define HZ      100
+#endif
+
 #define EXEC_PAGESIZE   4096
 
 #ifndef NOGROUP
diff --git a/include/asm-mips/div64.h b/include/asm-mips/div64.h
index 716371bd0980..d1d699105c11 100644
--- a/include/asm-mips/div64.h
+++ b/include/asm-mips/div64.h
@@ -82,7 +82,6 @@
         (n) = __quot; \
         __mod; })
 
-extern uint64_t div64_64(uint64_t dividend, uint64_t divisor);
 #endif /* (_MIPS_SZLONG == 32) */
 
 #if (_MIPS_SZLONG == 64)
@@ -106,11 +105,6 @@ extern uint64_t div64_64(uint64_t dividend, uint64_t divisor);
         (n) = __quot; \
         __mod; })
 
-static inline uint64_t div64_64(uint64_t dividend, uint64_t divisor)
-{
-        return dividend / divisor;
-}
-
 #endif /* (_MIPS_SZLONG == 64) */
 
 #endif /* _ASM_DIV64_H */
diff --git a/include/asm-mips/types.h b/include/asm-mips/types.h
index 2dd147f519d1..bcbb8d675af5 100644
--- a/include/asm-mips/types.h
+++ b/include/asm-mips/types.h
@@ -9,37 +9,15 @@
 #ifndef _ASM_TYPES_H
 #define _ASM_TYPES_H
 
-#ifndef __ASSEMBLY__
-
-typedef unsigned short umode_t;
-
-/*
- * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
- * header files exported to user space
- */
-
-typedef __signed__ char __s8;
-typedef unsigned char __u8;
-
-typedef __signed__ short __s16;
-typedef unsigned short __u16;
-
-typedef __signed__ int __s32;
-typedef unsigned int __u32;
-
-#if (_MIPS_SZLONG == 64)
-
-typedef __signed__ long __s64;
-typedef unsigned long __u64;
-
+#if _MIPS_SZLONG == 64
+# include <asm-generic/int-l64.h>
 #else
-
-#if defined(__GNUC__)
-__extension__ typedef __signed__ long long __s64;
-__extension__ typedef unsigned long long __u64;
+# include <asm-generic/int-ll64.h>
 #endif
 
-#endif
+#ifndef __ASSEMBLY__
+
+typedef unsigned short umode_t;
 
 #endif /* __ASSEMBLY__ */
 
@@ -52,30 +30,6 @@ __extension__ typedef unsigned long long __u64;
 
 #ifndef __ASSEMBLY__
 
-
-typedef __signed char s8;
-typedef unsigned char u8;
-
-typedef __signed short s16;
-typedef unsigned short u16;
-
-typedef __signed int s32;
-typedef unsigned int u32;
-
-#if (_MIPS_SZLONG == 64)
-
-typedef __signed__ long s64;
-typedef unsigned long u64;
-
-#else
-
-#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
-typedef __signed__ long long s64;
-typedef unsigned long long u64;
-#endif
-
-#endif
-
 #if (defined(CONFIG_HIGHMEM) && defined(CONFIG_64BIT_PHYS_ADDR)) \
     || defined(CONFIG_64BIT)
 typedef u64 dma_addr_t;
diff --git a/include/asm-mn10300/div64.h b/include/asm-mn10300/div64.h
index bf9c515a998c..3a8329b3e869 100644
--- a/include/asm-mn10300/div64.h
+++ b/include/asm-mn10300/div64.h
@@ -97,7 +97,4 @@ signed __muldiv64s(signed val, signed mult, signed div)
         return result;
 }
 
-extern __attribute__((const))
-uint64_t div64_64(uint64_t dividend, uint64_t divisor);
-
 #endif /* _ASM_DIV64 */
diff --git a/include/asm-mn10300/types.h b/include/asm-mn10300/types.h
index d40ea7628bfc..7b9f01042fd4 100644
--- a/include/asm-mn10300/types.h
+++ b/include/asm-mn10300/types.h
@@ -11,29 +11,12 @@
 #ifndef _ASM_TYPES_H
 #define _ASM_TYPES_H
 
+#include <asm-generic/int-ll64.h>
+
 #ifndef __ASSEMBLY__
 
 typedef unsigned short umode_t;
 
-/*
- * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
- * header files exported to user space
- */
-
-typedef __signed__ char __s8;
-typedef unsigned char __u8;
-
-typedef __signed__ short __s16;
-typedef unsigned short __u16;
-
-typedef __signed__ int __s32;
-typedef unsigned int __u32;
-
-#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
-typedef __signed__ long long __s64;
-typedef unsigned long long __u64;
-#endif
-
 #endif /* __ASSEMBLY__ */
 
 /*
@@ -45,18 +28,6 @@ typedef unsigned long long __u64;
 
 #ifndef __ASSEMBLY__
 
-typedef signed char s8;
-typedef unsigned char u8;
-
-typedef signed short s16;
-typedef unsigned short u16;
-
-typedef signed int s32;
-typedef unsigned int u32;
-
-typedef signed long long s64;
-typedef unsigned long long u64;
-
 /* Dma addresses are 32-bits wide.  */
 typedef u32 dma_addr_t;
 
diff --git a/include/asm-parisc/types.h b/include/asm-parisc/types.h
index 56c84802da59..7f5a39bfb4ce 100644
--- a/include/asm-parisc/types.h
+++ b/include/asm-parisc/types.h
@@ -1,29 +1,12 @@
 #ifndef _PARISC_TYPES_H
 #define _PARISC_TYPES_H
 
+#include <asm-generic/int-ll64.h>
+
 #ifndef __ASSEMBLY__
 
 typedef unsigned short umode_t;
 
-/*
- * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
- * header files exported to user space
- */
-
-typedef __signed__ char __s8;
-typedef unsigned char __u8;
-
-typedef __signed__ short __s16;
-typedef unsigned short __u16;
-
-typedef __signed__ int __s32;
-typedef unsigned int __u32;
-
-#if defined(__GNUC__)
-__extension__ typedef __signed__ long long __s64;
-__extension__ typedef unsigned long long __u64;
-#endif
-
 #endif /* __ASSEMBLY__ */
 
 /*
@@ -41,18 +24,6 @@ __extension__ typedef unsigned long long __u64;
 
 #ifndef __ASSEMBLY__
 
-typedef signed char s8;
-typedef unsigned char u8;
-
-typedef signed short s16;
-typedef unsigned short u16;
-
-typedef signed int s32;
-typedef unsigned int u32;
-
-typedef signed long long s64;
-typedef unsigned long long u64;
-
 /* Dma addresses are 32-bits wide.  */
 
 typedef u32 dma_addr_t;
diff --git a/include/asm-powerpc/io.h b/include/asm-powerpc/io.h
index afae0697e8ce..e0062d73db1c 100644
--- a/include/asm-powerpc/io.h
+++ b/include/asm-powerpc/io.h
@@ -2,7 +2,7 @@
 #define _ASM_POWERPC_IO_H
 #ifdef __KERNEL__
 
-/* 
+/*
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * as published by the Free Software Foundation; either version
@@ -18,6 +18,9 @@ extern int check_legacy_ioport(unsigned long base_port);
 #define _PNPWRP         0xa79
 #define PNPBIOS_BASE    0xf000
 
+#include <linux/device.h>
+#include <linux/io.h>
+
 #include <linux/compiler.h>
 #include <asm/page.h>
 #include <asm/byteorder.h>
@@ -744,6 +747,9 @@ static inline void * bus_to_virt(unsigned long address)
 
 #define clrsetbits_8(addr, clear, set) clrsetbits(8, addr, clear, set)
 
+void __iomem *devm_ioremap_prot(struct device *dev, resource_size_t offset,
+                                size_t size, unsigned long flags);
+
 #endif /* __KERNEL__ */
 
 #endif /* _ASM_POWERPC_IO_H */
diff --git a/include/asm-powerpc/kvm_host.h b/include/asm-powerpc/kvm_host.h
index 04ffbb8e0a35..81a69d711017 100644
--- a/include/asm-powerpc/kvm_host.h
+++ b/include/asm-powerpc/kvm_host.h
@@ -59,6 +59,7 @@ struct kvm_vcpu_stat {
         u32 emulated_inst_exits;
         u32 dec_exits;
         u32 ext_intr_exits;
+        u32 halt_wakeup;
 };
 
 struct tlbe {
diff --git a/include/asm-powerpc/kvm_ppc.h b/include/asm-powerpc/kvm_ppc.h
index 7ac820308a7e..b35a7e3ef978 100644
--- a/include/asm-powerpc/kvm_ppc.h
+++ b/include/asm-powerpc/kvm_ppc.h
@@ -77,12 +77,17 @@ static inline void kvmppc_clear_exception(struct kvm_vcpu *vcpu, int exception)
         clear_bit(priority, &vcpu->arch.pending_exceptions);
 }
 
+/* Helper function for "full" MSR writes. No need to call this if only EE is
+ * changing. */
 static inline void kvmppc_set_msr(struct kvm_vcpu *vcpu, u32 new_msr)
 {
         if ((new_msr & MSR_PR) != (vcpu->arch.msr & MSR_PR))
                 kvmppc_mmu_priv_switch(vcpu, new_msr & MSR_PR);
 
         vcpu->arch.msr = new_msr;
+
+        if (vcpu->arch.msr & MSR_WE)
+                kvm_vcpu_block(vcpu);
 }
 
 #endif /* __POWERPC_KVM_PPC_H__ */
diff --git a/include/asm-powerpc/ps3.h b/include/asm-powerpc/ps3.h
index 9e8ed6824e15..81ffe3b3c1ce 100644
--- a/include/asm-powerpc/ps3.h
+++ b/include/asm-powerpc/ps3.h
@@ -178,9 +178,6 @@ enum ps3_cpu_binding {
         PS3_BINDING_CPU_1 = 1,
 };
 
-int ps3_virq_setup(enum ps3_cpu_binding cpu, unsigned long outlet,
-        unsigned int *virq);
-int ps3_virq_destroy(unsigned int virq);
 int ps3_irq_plug_setup(enum ps3_cpu_binding cpu, unsigned long outlet,
         unsigned int *virq);
 int ps3_irq_plug_destroy(unsigned int virq);
diff --git a/include/asm-powerpc/syscalls.h b/include/asm-powerpc/syscalls.h
index b3ca41fc8bb1..2b8a458f990a 100644
--- a/include/asm-powerpc/syscalls.h
+++ b/include/asm-powerpc/syscalls.h
@@ -30,7 +30,7 @@ asmlinkage int sys_fork(unsigned long p1, unsigned long p2,
 asmlinkage int sys_vfork(unsigned long p1, unsigned long p2,
                 unsigned long p3, unsigned long p4, unsigned long p5,
                 unsigned long p6, struct pt_regs *regs);
-asmlinkage int sys_pipe(int __user *fildes);
+asmlinkage long sys_pipe(int __user *fildes);
 asmlinkage long sys_rt_sigaction(int sig,
                 const struct sigaction __user *act,
                 struct sigaction __user *oact, size_t sigsetsize);
diff --git a/include/asm-powerpc/types.h b/include/asm-powerpc/types.h
index c243a6ac60e5..d3374bc865ba 100644
--- a/include/asm-powerpc/types.h
+++ b/include/asm-powerpc/types.h
@@ -1,6 +1,12 @@
 #ifndef _ASM_POWERPC_TYPES_H
 #define _ASM_POWERPC_TYPES_H
 
+#ifdef __powerpc64__
+# include <asm-generic/int-l64.h>
+#else
+# include <asm-generic/int-ll64.h>
+#endif
+
 #ifndef __ASSEMBLY__
 
 /*
@@ -22,30 +28,6 @@ typedef unsigned int umode_t;
 typedef unsigned short umode_t;
 #endif
 
-/*
- * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
- * header files exported to user space
- */
-
-typedef __signed__ char __s8;
-typedef unsigned char __u8;
-
-typedef __signed__ short __s16;
-typedef unsigned short __u16;
-
-typedef __signed__ int __s32;
-typedef unsigned int __u32;
-
-#ifdef __powerpc64__
-typedef __signed__ long __s64;
-typedef unsigned long __u64;
-#else
-#if defined(__GNUC__)
-__extension__ typedef __signed__ long long __s64;
-__extension__ typedef unsigned long long __u64;
-#endif
-#endif /* __powerpc64__ */
-
 typedef struct {
         __u32 u[4];
 } __attribute__((aligned(16))) __vector128;
@@ -64,24 +46,6 @@ typedef struct {
 
 #ifndef __ASSEMBLY__
 
-
-typedef signed char s8;
-typedef unsigned char u8;
-
-typedef signed short s16;
-typedef unsigned short u16;
-
-typedef signed int s32;
-typedef unsigned int u32;
-
-#ifdef __powerpc64__
-typedef signed long s64;
-typedef unsigned long u64;
-#else
-typedef signed long long s64;
-typedef unsigned long long u64;
-#endif
-
 typedef __vector128 vector128;
 
 /* Physical address used by some IO functions */
diff --git a/include/asm-s390/types.h b/include/asm-s390/types.h
index 2c5879ae90ca..78dda038dd47 100644
--- a/include/asm-s390/types.h
+++ b/include/asm-s390/types.h
@@ -9,34 +9,16 @@
 #ifndef _S390_TYPES_H
 #define _S390_TYPES_H
 
+#ifndef __s390x__
+# include <asm-generic/int-l64.h>
+#else
+# include <asm-generic/int-ll64.h>
+#endif
+
 #ifndef __ASSEMBLY__
 
 typedef unsigned short umode_t;
 
-/*
- * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
- * header files exported to user space
- */
-
-typedef __signed__ char __s8;
-typedef unsigned char __u8;
-
-typedef __signed__ short __s16;
-typedef unsigned short __u16;
-
-typedef __signed__ int __s32;
-typedef unsigned int __u32;
-
-#ifndef __s390x__
-#if defined(__GNUC__)
-__extension__ typedef __signed__ long long __s64;
-__extension__ typedef unsigned long long __u64;
-#endif
-#else /* __s390x__ */
-typedef __signed__ long __s64;
-typedef unsigned long __u64;
-#endif
-
 /* A address type so that arithmetic can be done on it & it can be upgraded to
    64 bit when necessary 
 */
@@ -58,24 +40,6 @@ typedef __signed__ long saddr_t;
 
 #ifndef __ASSEMBLY__
 
-
-typedef signed char s8;
-typedef unsigned char u8;
-
-typedef signed short s16;
-typedef unsigned short u16;
-
-typedef signed int s32;
-typedef unsigned int u32;
-
-#ifndef __s390x__
-typedef signed long long s64;
-typedef unsigned long long u64;
-#else /* __s390x__ */
-typedef signed long s64;
-typedef unsigned  long u64;
-#endif /* __s390x__ */
-
 typedef u32 dma_addr_t;
 
 #ifndef __s390x__
diff --git a/include/asm-sh/types.h b/include/asm-sh/types.h
index a6e1d4126e67..beea4e6f8dfd 100644
--- a/include/asm-sh/types.h
+++ b/include/asm-sh/types.h
@@ -1,29 +1,12 @@
 #ifndef __ASM_SH_TYPES_H
 #define __ASM_SH_TYPES_H
 
+#include <asm-generic/int-ll64.h>
+
 #ifndef __ASSEMBLY__
 
 typedef unsigned short umode_t;
 
-/*
- * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
- * header files exported to user space
- */
-
-typedef __signed__ char __s8;
-typedef unsigned char __u8;
-
-typedef __signed__ short __s16;
-typedef unsigned short __u16;
-
-typedef __signed__ int __s32;
-typedef unsigned int __u32;
-
-#if defined(__GNUC__)
-__extension__ typedef __signed__ long long __s64;
-__extension__ typedef unsigned long long __u64;
-#endif
-
 #endif /* __ASSEMBLY__ */
 
 /*
@@ -35,19 +18,6 @@ __extension__ typedef unsigned long long __u64;
 
 #ifndef __ASSEMBLY__
 
-
-typedef __signed__ char s8;
-typedef unsigned char u8;
-
-typedef __signed__ short s16;
-typedef unsigned short u16;
-
-typedef __signed__ int s32;
-typedef unsigned int u32;
-
-typedef __signed__ long long s64;
-typedef unsigned long long u64;
-
 /* Dma addresses are 32-bits wide.  */
 
 typedef u32 dma_addr_t;
diff --git a/include/asm-sparc/oplib.h b/include/asm-sparc/oplib.h
index 17ba82ee220a..7becc846544a 100644
--- a/include/asm-sparc/oplib.h
+++ b/include/asm-sparc/oplib.h
@@ -34,9 +34,6 @@ extern unsigned int prom_rev, prom_prev;
  */
 extern int prom_root_node;
 
-/* PROM stdin and stdout */
-extern int prom_stdin, prom_stdout;
-
 /* Pointer to prom structure containing the device tree traversal
  * and usage utility functions.  Only prom-lib should use these,
  * users use the interface defined by the library only!
@@ -84,20 +81,6 @@ extern int prom_devclose(int device_handle);
 extern void prom_seek(int device_handle, unsigned int seek_hival,
                       unsigned int seek_lowval);
 
-/* Machine memory configuration routine. */
-
-/* This function returns a V0 format memory descriptor table, it has three
- * entries.  One for the total amount of physical ram on the machine, one
- * for the amount of physical ram available, and one describing the virtual
- * areas which are allocated by the prom.  So, in a sense the physical
- * available is a calculation of the total physical minus the physical mapped
- * by the prom with virtual mappings.
- *
- * These lists are returned pre-sorted, this should make your life easier
- * since the prom itself is way too lazy to do such nice things.
- */
-extern struct linux_mem_v0 *prom_meminfo(void);
-
 /* Miscellaneous routines, don't really fit in any category per se. */
 
 /* Reboot the machine with the command line passed. */
diff --git a/include/asm-sparc/page.h b/include/asm-sparc/page.h
index 39ccf2da297c..1625a8c3e0d2 100644
--- a/include/asm-sparc/page.h
+++ b/include/asm-sparc/page.h
@@ -38,12 +38,11 @@
 
 /* The following structure is used to hold the physical
  * memory configuration of the machine.  This is filled in
- * probe_memory() and is later used by mem_init() to set up
- * mem_map[].  We statically allocate SPARC_PHYS_BANKS of
+ * prom_meminit() and is later used by mem_init() to set up
+ * mem_map[].  We statically allocate SPARC_PHYS_BANKS+1 of
  * these structs, this is arbitrary.  The entry after the
  * last valid one has num_bytes==0.
  */
-
 struct sparc_phys_banks {
   unsigned long base_addr;
   unsigned long num_bytes;
diff --git a/include/asm-sparc/types.h b/include/asm-sparc/types.h
index 42fc6ed98156..1b08ef860a66 100644
--- a/include/asm-sparc/types.h
+++ b/include/asm-sparc/types.h
@@ -3,34 +3,18 @@
 #define _SPARC_TYPES_H
 
 /*
- * _xx is ok: it doesn't pollute the POSIX namespace. Use these in the
- * header files exported to user space.
- */
-
-/*
  * This file is never included by application software unless
  * explicitly requested (e.g., via linux/types.h) in which case the
  * application is Linux specific so (user-) name space pollution is
  * not a major issue.  However, for interoperability, libraries still
  * need to be careful to avoid a name clashes.
  */
+#include <asm-generic/int-ll64.h>
 
 #ifndef __ASSEMBLY__
 
 typedef unsigned short umode_t;
 
-typedef __signed__ char __s8;
-typedef unsigned char __u8;
-
-typedef __signed__ short __s16;
-typedef unsigned short __u16;
-
-typedef __signed__ int __s32;
-typedef unsigned int __u32;
-
-typedef __signed__ long long __s64;
-typedef unsigned long long __u64;
-
 #endif /* __ASSEMBLY__ */
 
 #ifdef __KERNEL__
@@ -39,18 +23,6 @@ typedef unsigned long long __u64;
 
 #ifndef __ASSEMBLY__
 
-typedef __signed__ char s8;
-typedef unsigned char u8;
-
-typedef __signed__ short s16;
-typedef unsigned short u16;
-
-typedef __signed__ int s32;
-typedef unsigned int u32;
-
-typedef __signed__ long long s64;
-typedef unsigned long long u64;
-
 typedef u32 dma_addr_t;
 typedef u32 dma64_addr_t;
 
diff --git a/include/asm-sparc64/types.h b/include/asm-sparc64/types.h
index d0ee7f105838..5dbe04f4044a 100644
--- a/include/asm-sparc64/types.h
+++ b/include/asm-sparc64/types.h
@@ -9,28 +9,12 @@
  * not a major issue.  However, for interoperability, libraries still
  * need to be careful to avoid a name clashes.
  */
+#include <asm-generic/int-l64.h>
 
 #ifndef __ASSEMBLY__
 
 typedef unsigned short umode_t;
 
-/*
- * _xx is ok: it doesn't pollute the POSIX namespace. Use these in the
- * header files exported to user space.
- */
-
-typedef __signed__ char __s8;
-typedef unsigned char __u8;
-
-typedef __signed__ short __s16;
-typedef unsigned short __u16;
-
-typedef __signed__ int __s32;
-typedef unsigned int __u32;
-
-typedef __signed__ long __s64;
-typedef unsigned long __u64;
-
 #endif /* __ASSEMBLY__ */
 
 #ifdef __KERNEL__
@@ -39,18 +23,6 @@ typedef unsigned long __u64;
 
 #ifndef __ASSEMBLY__
 
-typedef __signed__ char s8;
-typedef unsigned char u8;
-
-typedef __signed__ short s16;
-typedef unsigned short u16;
-
-typedef __signed__ int s32;
-typedef unsigned int u32;
-
-typedef __signed__ long s64;
-typedef unsigned long u64;
-
 /* Dma addresses come in generic and 64-bit flavours.  */
 
 typedef u32 dma_addr_t;
diff --git a/include/asm-um/div64.h b/include/asm-um/div64.h
index 7b73b2cd5b34..1e17f7409cab 100644
--- a/include/asm-um/div64.h
+++ b/include/asm-um/div64.h
@@ -3,5 +3,4 @@
 
 #include "asm/arch/div64.h"
 
-extern uint64_t div64_64(uint64_t dividend, uint64_t divisor);
 #endif
diff --git a/include/asm-v850/types.h b/include/asm-v850/types.h
index 284bda882112..89f735ee41dd 100644
--- a/include/asm-v850/types.h
+++ b/include/asm-v850/types.h
@@ -10,28 +10,10 @@
  * not a major issue.  However, for interoperability, libraries still
  * need to be careful to avoid a name clashes.
  */
+#include <asm-generic/int-ll64.h>
 
 typedef unsigned short umode_t;
 
-/*
- * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
- * header files exported to user space
- */
-
-typedef __signed__ char __s8;
-typedef unsigned char __u8;
-
-typedef __signed__ short __s16;
-typedef unsigned short __u16;
-
-typedef __signed__ int __s32;
-typedef unsigned int __u32;
-
-#if defined(__GNUC__)
-__extension__ typedef __signed__ long long __s64;
-__extension__ typedef unsigned long long __u64;
-#endif
-
 #endif /* !__ASSEMBLY__ */
 
 /*
@@ -43,18 +25,6 @@ __extension__ typedef unsigned long long __u64;
 
 #ifndef __ASSEMBLY__
 
-typedef signed char s8;
-typedef unsigned char u8;
-
-typedef signed short s16;
-typedef unsigned short u16;
-
-typedef signed int s32;
-typedef unsigned int u32;
-
-typedef signed long long s64;
-typedef unsigned long long u64;
-
 /* Dma addresses are 32-bits wide.  */
 
 typedef u32 dma_addr_t;
diff --git a/include/asm-x86/bootparam.h b/include/asm-x86/bootparam.h
index e8659909e5f6..f62f4733606b 100644
--- a/include/asm-x86/bootparam.h
+++ b/include/asm-x86/bootparam.h
@@ -14,10 +14,10 @@
 
 /* extensible setup data list node */
 struct setup_data {
-        u64 next;
-        u32 type;
-        u32 len;
-        u8 data[0];
+        __u64 next;
+        __u32 type;
+        __u32 len;
+        __u8 data[0];
 };
 
 struct setup_header {
diff --git a/include/asm-x86/div64.h b/include/asm-x86/div64.h
index 0dbf8bf3ef0a..9a2d644c08ef 100644
--- a/include/asm-x86/div64.h
+++ b/include/asm-x86/div64.h
@@ -33,25 +33,25 @@
         __mod;                                                  \
 })
 
-/*
- * (long)X = ((long long)divs) / (long)div
- * (long)rem = ((long long)divs) % (long)div
- *
- * Warning, this will do an exception if X overflows.
- */
-#define div_long_long_rem(a, b, c) div_ll_X_l_rem(a, b, c)
-
-static inline long div_ll_X_l_rem(long long divs, long div, long *rem)
+static inline u64 div_u64_rem(u64 dividend, u32 divisor, u32 *remainder)
 {
-        long dum2;
-        asm("divl %2":"=a"(dum2), "=d"(*rem)
-            : "rm"(div), "A"(divs));
-
-        return dum2;
-
+        union {
+                u64 v64;
+                u32 v32[2];
+        } d = { dividend };
+        u32 upper;
+
+        upper = d.v32[1];
+        d.v32[1] = 0;
+        if (upper >= divisor) {
+                d.v32[1] = upper / divisor;
+                upper %= divisor;
+        }
+        asm ("divl %2" : "=a" (d.v32[0]), "=d" (*remainder) :
+                "rm" (divisor), "0" (d.v32[0]), "1" (upper));
+        return d.v64;
 }
-
-extern uint64_t div64_64(uint64_t dividend, uint64_t divisor);
+#define div_u64_rem     div_u64_rem
 
 #else
 # include <asm-generic/div64.h>
diff --git a/include/asm-x86/dmi.h b/include/asm-x86/dmi.h
index 1241e6ad1935..4edf7514a750 100644
--- a/include/asm-x86/dmi.h
+++ b/include/asm-x86/dmi.h
@@ -27,6 +27,7 @@ static inline void *dmi_alloc(unsigned len)
 
 #endif
 
+/* Use early IO mappings for DMI because it's initialized early */
 #define dmi_ioremap early_ioremap
 #define dmi_iounmap early_iounmap
 
diff --git a/include/asm-x86/io_32.h b/include/asm-x86/io_32.h
index 6e73467a4fb1..049e81e797a0 100644
--- a/include/asm-x86/io_32.h
+++ b/include/asm-x86/io_32.h
@@ -133,11 +133,6 @@ extern void *early_ioremap(unsigned long offset, unsigned long size);
 extern void early_iounmap(void *addr, unsigned long size);
 extern void __iomem *fix_ioremap(unsigned idx, unsigned long phys);
 
-/* Use early IO mappings for DMI because it's initialized early */
-#define dmi_ioremap early_ioremap
-#define dmi_iounmap early_iounmap
-#define dmi_alloc alloc_bootmem
-
 /*
  * ISA I/O bus memory addresses are 1:1 with the physical address.
  */
diff --git a/include/asm-x86/kvm_host.h b/include/asm-x86/kvm_host.h
index 9d963cd6533c..1d8cd01fa514 100644
--- a/include/asm-x86/kvm_host.h
+++ b/include/asm-x86/kvm_host.h
@@ -314,6 +314,9 @@ struct kvm_arch{
         struct page *apic_access_page;
 
         gpa_t wall_clock;
+
+        struct page *ept_identity_pagetable;
+        bool ept_identity_pagetable_done;
 };
 
 struct kvm_vm_stat {
@@ -422,6 +425,7 @@ struct kvm_x86_ops {
                                        struct kvm_run *run);
 
         int (*set_tss_addr)(struct kvm *kvm, unsigned int addr);
+        int (*get_tdp_level)(void);
 };
 
 extern struct kvm_x86_ops *kvm_x86_ops;
@@ -433,6 +437,9 @@ void kvm_mmu_destroy(struct kvm_vcpu *vcpu);
 int kvm_mmu_create(struct kvm_vcpu *vcpu);
 int kvm_mmu_setup(struct kvm_vcpu *vcpu);
 void kvm_mmu_set_nonpresent_ptes(u64 trap_pte, u64 notrap_pte);
+void kvm_mmu_set_base_ptes(u64 base_pte);
+void kvm_mmu_set_mask_ptes(u64 user_mask, u64 accessed_mask,
+                u64 dirty_mask, u64 nx_mask, u64 x_mask);
 
 int kvm_mmu_reset_context(struct kvm_vcpu *vcpu);
 void kvm_mmu_slot_remove_write_access(struct kvm *kvm, int slot);
@@ -620,7 +627,7 @@ static inline void fx_restore(struct i387_fxsave_struct *image)
         asm("fxrstor (%0)":: "r" (image));
 }
 
-static inline void fpu_init(void)
+static inline void fx_finit(void)
 {
         asm("finit");
 }
@@ -644,6 +651,7 @@ static inline void kvm_inject_gp(struct kvm_vcpu *vcpu, u32 error_code)
 #define ASM_VMX_VMWRITE_RSP_RDX   ".byte 0x0f, 0x79, 0xd4"
 #define ASM_VMX_VMXOFF            ".byte 0x0f, 0x01, 0xc4"
 #define ASM_VMX_VMXON_RAX         ".byte 0xf3, 0x0f, 0xc7, 0x30"
+#define ASM_VMX_INVEPT            ".byte 0x66, 0x0f, 0x38, 0x80, 0x08"
 #define ASM_VMX_INVVPID           ".byte 0x66, 0x0f, 0x38, 0x81, 0x08"
 
 #define MSR_IA32_TIME_STAMP_COUNTER             0x010
diff --git a/include/asm-x86/types.h b/include/asm-x86/types.h
index 63733f315688..1ac80cd9acf8 100644
--- a/include/asm-x86/types.h
+++ b/include/asm-x86/types.h
@@ -1,34 +1,12 @@
 #ifndef _ASM_X86_TYPES_H
 #define _ASM_X86_TYPES_H
 
+#include <asm-generic/int-ll64.h>
+
 #ifndef __ASSEMBLY__
 
 typedef unsigned short umode_t;
 
-/*
- * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
- * header files exported to user space
- */
-
-typedef __signed__ char __s8;
-typedef unsigned char __u8;
-
-typedef __signed__ short __s16;
-typedef unsigned short __u16;
-
-typedef __signed__ int __s32;
-typedef unsigned int __u32;
-
-#ifdef __i386__
-# ifdef __GNUC__
-__extension__ typedef __signed__ long long __s64;
-__extension__ typedef unsigned long long __u64;
-# endif
-#else
-typedef __signed__ long long __s64;
-typedef unsigned long long __u64;
-#endif
-
 #endif /* __ASSEMBLY__ */
 
 /*
@@ -44,18 +22,6 @@ typedef unsigned long long __u64;
 
 #ifndef __ASSEMBLY__
 
-typedef signed char s8;
-typedef unsigned char u8;
-
-typedef signed short s16;
-typedef unsigned short u16;
-
-typedef signed int s32;
-typedef unsigned int u32;
-
-typedef signed long long s64;
-typedef unsigned long long u64;
-
 typedef u64 dma64_addr_t;
 #if defined(CONFIG_X86_64) || defined(CONFIG_HIGHMEM64G)
 /* DMA addresses come in 32-bit and 64-bit flavours. */
diff --git a/include/asm-xtensa/types.h b/include/asm-xtensa/types.h
index b27d841a8eb7..c89569a8da0c 100644
--- a/include/asm-xtensa/types.h
+++ b/include/asm-xtensa/types.h
@@ -11,6 +11,7 @@
 #ifndef _XTENSA_TYPES_H
 #define _XTENSA_TYPES_H
 
+#include <asm-generic/int-ll64.h>
 
 #ifdef __ASSEMBLY__
 # define __XTENSA_UL(x)         (x)
@@ -25,42 +26,10 @@
 typedef unsigned short umode_t;
 
 /*
- * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
- * header files exported to user space
- */
-
-typedef __signed__ char __s8;
-typedef unsigned char __u8;
-
-typedef __signed__ short __s16;
-typedef unsigned short __u16;
-
-typedef __signed__ int __s32;
-typedef unsigned int __u32;
-
-#if defined(__GNUC__)
-__extension__ typedef __signed__ long long __s64;
-__extension__ typedef unsigned long long __u64;
-#endif
-
-/*
  * These aren't exported outside the kernel to avoid name space clashes
  */
 #ifdef __KERNEL__
 
-typedef __signed__ char s8;
-typedef unsigned char u8;
-
-typedef __signed__ short s16;
-typedef unsigned short u16;
-
-typedef __signed__ int s32;
-typedef unsigned int u32;
-
-typedef __signed__ long long s64;
-typedef unsigned long long u64;
-
-
 #define BITS_PER_LONG 32
 
 /* Dma addresses are 32-bits wide.  */
diff --git a/include/crypto/scatterwalk.h b/include/crypto/scatterwalk.h
index 224658b8d806..833d208c25d6 100644
--- a/include/crypto/scatterwalk.h
+++ b/include/crypto/scatterwalk.h
@@ -57,10 +57,14 @@ static inline void scatterwalk_sg_chain(struct scatterlist *sg1, int num,
                                         struct scatterlist *sg2)
 {
         sg_set_page(&sg1[num - 1], (void *)sg2, 0, 0);
+        sg1[num - 1].page_link &= ~0x02;
 }
 
 static inline struct scatterlist *scatterwalk_sg_next(struct scatterlist *sg)
 {
+        if (sg_is_last(sg))
+                return NULL;
+
         return (++sg)->length ? sg : (void *)sg_page(sg);
 }
 
diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index 78fade0a1e35..b7d81b2a9041 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -346,6 +346,11 @@ unifdef-y += videodev.h
 unifdef-y += virtio_config.h
 unifdef-y += virtio_blk.h
 unifdef-y += virtio_net.h
+unifdef-y += virtio_9p.h
+unifdef-y += virtio_balloon.h
+unifdef-y += virtio_console.h
+unifdef-y += virtio_pci.h
+unifdef-y += virtio_ring.h
 unifdef-y += vt.h
 unifdef-y += wait.h
 unifdef-y += wanrouter.h
diff --git a/include/linux/anon_inodes.h b/include/linux/anon_inodes.h
index b2e1ba325b9a..6129e58ca7c9 100644
--- a/include/linux/anon_inodes.h
+++ b/include/linux/anon_inodes.h
@@ -8,8 +8,7 @@
 #ifndef _LINUX_ANON_INODES_H
 #define _LINUX_ANON_INODES_H
 
-int anon_inode_getfd(int *pfd, struct inode **pinode, struct file **pfile,
-                     const char *name, const struct file_operations *fops,
+int anon_inode_getfd(const char *name, const struct file_operations *fops,
                      void *priv);
 
 #endif /* _LINUX_ANON_INODES_H */
diff --git a/include/linux/calc64.h b/include/linux/calc64.h
deleted file mode 100644
index ebf4b8f38d88..000000000000
--- a/include/linux/calc64.h
+++ /dev/null
@@ -1,49 +0,0 @@
-#ifndef _LINUX_CALC64_H
-#define _LINUX_CALC64_H
-
-#include <linux/types.h>
-#include <asm/div64.h>
-
-/*
- * This is a generic macro which is used when the architecture
- * specific div64.h does not provide a optimized one.
- *
- * The 64bit dividend is divided by the divisor (data type long), the
- * result is returned and the remainder stored in the variable
- * referenced by remainder (data type long *). In contrast to the
- * do_div macro the dividend is kept intact.
- */
-#ifndef div_long_long_rem
-#define div_long_long_rem(dividend, divisor, remainder) \
-        do_div_llr((dividend), divisor, remainder)
-
-static inline unsigned long do_div_llr(const long long dividend,
-                                       const long divisor, long *remainder)
-{
-        u64 result = dividend;
-
-        *(remainder) = do_div(result, divisor);
-        return (unsigned long) result;
-}
-#endif
-
-/*
- * Sign aware variation of the above. On some architectures a
- * negative dividend leads to an divide overflow exception, which
- * is avoided by the sign check.
- */
-static inline long div_long_long_rem_signed(const long long dividend,
-                                            const long divisor, long *remainder)
-{
-        long res;
-
-        if (unlikely(dividend < 0)) {
-                res = -div_long_long_rem(-dividend, divisor, remainder);
-                *remainder = -(*remainder);
-        } else
-                res = div_long_long_rem(dividend, divisor, remainder);
-
-        return res;
-}
-
-#endif
diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h
index 35094479ca55..55e434feec99 100644
--- a/include/linux/clocksource.h
+++ b/include/linux/clocksource.h
@@ -93,6 +93,8 @@ struct clocksource {
 #endif
 };
 
+extern struct clocksource *clock;       /* current clocksource */
+
 /*
  * Clock source flags bits::
  */
diff --git a/include/linux/compat.h b/include/linux/compat.h
index 8fa7857e153b..cf8d11cad5ae 100644
--- a/include/linux/compat.h
+++ b/include/linux/compat.h
@@ -65,10 +65,11 @@ struct compat_timex {
         compat_long_t calcnt;
         compat_long_t errcnt;
         compat_long_t stbcnt;
+        compat_int_t tai;
 
         compat_int_t :32; compat_int_t :32; compat_int_t :32; compat_int_t :32;
         compat_int_t :32; compat_int_t :32; compat_int_t :32; compat_int_t :32;
-        compat_int_t :32; compat_int_t :32; compat_int_t :32; compat_int_t :32;
+        compat_int_t :32; compat_int_t :32; compat_int_t :32;
 };
 
 #define _COMPAT_NSIG_WORDS      (_COMPAT_NSIG / _COMPAT_NSIG_BPW)
diff --git a/include/linux/device.h b/include/linux/device.h
index 832fb0eb2933..8c23e3dfe3ac 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -380,6 +380,12 @@ struct device {
 /* Get the wakeup routines, which depend on struct device */
 #include <linux/pm_wakeup.h>
 
+static inline const char *dev_name(struct device *dev)
+{
+        /* will be changed into kobject_name(&dev->kobj) in the near future */
+        return dev->bus_id;
+}
+
 #ifdef CONFIG_NUMA
 static inline int dev_to_node(struct device *dev)
 {
@@ -478,7 +484,7 @@ extern void sysdev_shutdown(void);
 extern const char *dev_driver_string(struct device *dev);
 #define dev_printk(level, dev, format, arg...)  \
         printk(level "%s %s: " format , dev_driver_string(dev) , \
-               (dev)->bus_id , ## arg)
+               dev_name(dev) , ## arg)
 
 #define dev_emerg(dev, format, arg...)          \
         dev_printk(KERN_EMERG , dev , format , ## arg)
diff --git a/include/linux/fdtable.h b/include/linux/fdtable.h
new file mode 100644
index 000000000000..a118f3c0b240
--- /dev/null
+++ b/include/linux/fdtable.h
@@ -0,0 +1,99 @@
+/*
+ * descriptor table internals; you almost certainly want file.h instead.
+ */
+
+#ifndef __LINUX_FDTABLE_H
+#define __LINUX_FDTABLE_H
+
+#include <asm/atomic.h>
+#include <linux/posix_types.h>
+#include <linux/compiler.h>
+#include <linux/spinlock.h>
+#include <linux/rcupdate.h>
+#include <linux/types.h>
+
+/*
+ * The default fd array needs to be at least BITS_PER_LONG,
+ * as this is the granularity returned by copy_fdset().
+ */
+#define NR_OPEN_DEFAULT BITS_PER_LONG
+
+/*
+ * The embedded_fd_set is a small fd_set,
+ * suitable for most tasks (which open <= BITS_PER_LONG files)
+ */
+struct embedded_fd_set {
+        unsigned long fds_bits[1];
+};
+
+struct fdtable {
+        unsigned int max_fds;
+        struct file ** fd;      /* current fd array */
+        fd_set *close_on_exec;
+        fd_set *open_fds;
+        struct rcu_head rcu;
+        struct fdtable *next;
+};
+
+/*
+ * Open file table structure
+ */
+struct files_struct {
+  /*
+   * read mostly part
+   */
+        atomic_t count;
+        struct fdtable *fdt;
+        struct fdtable fdtab;
+  /*
+   * written part on a separate cache line in SMP
+   */
+        spinlock_t file_lock ____cacheline_aligned_in_smp;
+        int next_fd;
+        struct embedded_fd_set close_on_exec_init;
+        struct embedded_fd_set open_fds_init;
+        struct file * fd_array[NR_OPEN_DEFAULT];
+};
+
+#define files_fdtable(files) (rcu_dereference((files)->fdt))
+
+extern struct kmem_cache *filp_cachep;
+
+struct file_operations;
+struct vfsmount;
+struct dentry;
+
+extern int expand_files(struct files_struct *, int nr);
+extern void free_fdtable_rcu(struct rcu_head *rcu);
+extern void __init files_defer_init(void);
+
+static inline void free_fdtable(struct fdtable *fdt)
+{
+        call_rcu(&fdt->rcu, free_fdtable_rcu);
+}
+
+static inline struct file * fcheck_files(struct files_struct *files, unsigned int fd)
+{
+        struct file * file = NULL;
+        struct fdtable *fdt = files_fdtable(files);
+
+        if (fd < fdt->max_fds)
+                file = rcu_dereference(fdt->fd[fd]);
+        return file;
+}
+
+/*
+ * Check whether the specified fd has an open file.
+ */
+#define fcheck(fd)      fcheck_files(current->files, fd)
+
+struct task_struct;
+
+struct files_struct *get_files_struct(struct task_struct *);
+void put_files_struct(struct files_struct *fs);
+void reset_files_struct(struct files_struct *);
+int unshare_files(struct files_struct **);
+
+extern struct kmem_cache *files_cachep;
+
+#endif /* __LINUX_FDTABLE_H */
diff --git a/include/linux/file.h b/include/linux/file.h
index 69baf5a4f0a5..27c64bdc68c9 100644
--- a/include/linux/file.h
+++ b/include/linux/file.h
@@ -5,59 +5,11 @@
 #ifndef __LINUX_FILE_H
 #define __LINUX_FILE_H
 
-#include <asm/atomic.h>
-#include <linux/posix_types.h>
 #include <linux/compiler.h>
-#include <linux/spinlock.h>
-#include <linux/rcupdate.h>
 #include <linux/types.h>
+#include <linux/posix_types.h>
 
-/*
- * The default fd array needs to be at least BITS_PER_LONG,
- * as this is the granularity returned by copy_fdset().
- */
-#define NR_OPEN_DEFAULT BITS_PER_LONG
-
-/*
- * The embedded_fd_set is a small fd_set,
- * suitable for most tasks (which open <= BITS_PER_LONG files)
- */
-struct embedded_fd_set {
-        unsigned long fds_bits[1];
-};
-
-struct fdtable {
-        unsigned int max_fds;
-        struct file ** fd;      /* current fd array */
-        fd_set *close_on_exec;
-        fd_set *open_fds;
-        struct rcu_head rcu;
-        struct fdtable *next;
-};
-
-/*
- * Open file table structure
- */
-struct files_struct {
-  /*
-   * read mostly part
-   */
-        atomic_t count;
-        struct fdtable *fdt;
-        struct fdtable fdtab;
-  /*
-   * written part on a separate cache line in SMP
-   */
-        spinlock_t file_lock ____cacheline_aligned_in_smp;
-        int next_fd;
-        struct embedded_fd_set close_on_exec_init;
-        struct embedded_fd_set open_fds_init;
-        struct file * fd_array[NR_OPEN_DEFAULT];
-};
-
-#define files_fdtable(files) (rcu_dereference((files)->fdt))
-
-extern struct kmem_cache *filp_cachep;
+struct file;
 
 extern void __fput(struct file *);
 extern void fput(struct file *);
@@ -85,41 +37,7 @@ extern void put_filp(struct file *);
 extern int get_unused_fd(void);
 extern int get_unused_fd_flags(int flags);
 extern void put_unused_fd(unsigned int fd);
-struct kmem_cache;
-
-extern int expand_files(struct files_struct *, int nr);
-extern void free_fdtable_rcu(struct rcu_head *rcu);
-extern void __init files_defer_init(void);
-
-static inline void free_fdtable(struct fdtable *fdt)
-{
-        call_rcu(&fdt->rcu, free_fdtable_rcu);
-}
-
-static inline struct file * fcheck_files(struct files_struct *files, unsigned int fd)
-{
-        struct file * file = NULL;
-        struct fdtable *fdt = files_fdtable(files);
-
-        if (fd < fdt->max_fds)
-                file = rcu_dereference(fdt->fd[fd]);
-        return file;
-}
-
-/*
- * Check whether the specified fd has an open file.
- */
-#define fcheck(fd)      fcheck_files(current->files, fd)
 
 extern void fd_install(unsigned int fd, struct file *file);
 
-struct task_struct;
-
-struct files_struct *get_files_struct(struct task_struct *);
-void put_files_struct(struct files_struct *fs);
-void reset_files_struct(struct files_struct *);
-int unshare_files(struct files_struct **);
-
-extern struct kmem_cache *files_cachep;
-
 #endif /* __LINUX_FILE_H */
diff --git a/include/linux/hrtimer.h b/include/linux/hrtimer.h
index 31a4d653389f..6d93dce61cbb 100644
--- a/include/linux/hrtimer.h
+++ b/include/linux/hrtimer.h
@@ -316,6 +316,15 @@ static inline int hrtimer_is_queued(struct hrtimer *timer)
                 (HRTIMER_STATE_ENQUEUED | HRTIMER_STATE_PENDING);
 }
 
+/*
+ * Helper function to check, whether the timer is running the callback
+ * function
+ */
+static inline int hrtimer_callback_running(struct hrtimer *timer)
+{
+        return timer->state & HRTIMER_STATE_CALLBACK;
+}
+
 /* Forward a hrtimer so it expires after now: */
 extern u64
 hrtimer_forward(struct hrtimer *timer, ktime_t now, ktime_t interval);
diff --git a/include/linux/init_task.h b/include/linux/init_task.h
index bf6b8a61f8db..b24c2875aa05 100644
--- a/include/linux/init_task.h
+++ b/include/linux/init_task.h
@@ -1,7 +1,7 @@
 #ifndef _LINUX__INIT_TASK_H
 #define _LINUX__INIT_TASK_H
 
-#include <linux/file.h>
+#include <linux/fdtable.h>
 #include <linux/rcupdate.h>
 #include <linux/irqflags.h>
 #include <linux/utsname.h>
diff --git a/include/linux/io.h b/include/linux/io.h
index 3a03a3604cce..6c7f0ba0d5fa 100644
--- a/include/linux/io.h
+++ b/include/linux/io.h
@@ -65,5 +65,6 @@ void __iomem *devm_ioremap_nocache(struct device *dev, resource_size_t offset,
 void devm_iounmap(struct device *dev, void __iomem *addr);
 int check_signature(const volatile void __iomem *io_addr,
                         const unsigned char *signature, int length);
+void devm_ioremap_release(struct device *dev, void *res);
 
 #endif /* _LINUX_IO_H */
diff --git a/include/linux/irq.h b/include/linux/irq.h
index 1883a85625dd..552e0ec269c9 100644
--- a/include/linux/irq.h
+++ b/include/linux/irq.h
@@ -61,6 +61,7 @@ typedef	void (*irq_flow_handler_t)(unsigned int irq,
 #define IRQ_WAKEUP              0x00100000      /* IRQ triggers system wakeup */
 #define IRQ_MOVE_PENDING        0x00200000      /* need to re-target IRQ destination */
 #define IRQ_NO_BALANCING        0x00400000      /* IRQ is excluded from balancing */
+#define IRQ_SPURIOUS_DISABLED   0x00800000      /* IRQ was disabled by the spurious trap */
 
 #ifdef CONFIG_IRQ_PER_CPU
 # define CHECK_IRQ_PER_CPU(var) ((var) & IRQ_PER_CPU)
diff --git a/include/linux/jiffies.h b/include/linux/jiffies.h
index 33ef710dac24..abb6ac639e8e 100644
--- a/include/linux/jiffies.h
+++ b/include/linux/jiffies.h
@@ -1,7 +1,7 @@
 #ifndef _LINUX_JIFFIES_H
 #define _LINUX_JIFFIES_H
 
-#include <linux/calc64.h>
+#include <linux/math64.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/time.h>
diff --git a/include/linux/kgdb.h b/include/linux/kgdb.h
index 9757b1a6d9dc..6adcc297e354 100644
--- a/include/linux/kgdb.h
+++ b/include/linux/kgdb.h
@@ -261,10 +261,12 @@ struct kgdb_io {
 
 extern struct kgdb_arch         arch_kgdb_ops;
 
+extern unsigned long __weak kgdb_arch_pc(int exception, struct pt_regs *regs);
+
 extern int kgdb_register_io_module(struct kgdb_io *local_kgdb_io_ops);
 extern void kgdb_unregister_io_module(struct kgdb_io *local_kgdb_io_ops);
 
-extern int kgdb_hex2long(char **ptr, long *long_val);
+extern int kgdb_hex2long(char **ptr, unsigned long *long_val);
 extern int kgdb_mem2hex(char *mem, char *buf, int count);
 extern int kgdb_hex2mem(char *buf, char *mem, int count);
 
diff --git a/include/linux/math64.h b/include/linux/math64.h
new file mode 100644
index 000000000000..c1a5f81501ff
--- /dev/null
+++ b/include/linux/math64.h
@@ -0,0 +1,84 @@
+#ifndef _LINUX_MATH64_H
+#define _LINUX_MATH64_H
+
+#include <linux/types.h>
+#include <asm/div64.h>
+
+#if BITS_PER_LONG == 64
+
+/**
+ * div_u64_rem - unsigned 64bit divide with 32bit divisor with remainder
+ *
+ * This is commonly provided by 32bit archs to provide an optimized 64bit
+ * divide.
+ */
+static inline u64 div_u64_rem(u64 dividend, u32 divisor, u32 *remainder)
+{
+        *remainder = dividend % divisor;
+        return dividend / divisor;
+}
+
+/**
+ * div_s64_rem - signed 64bit divide with 32bit divisor with remainder
+ */
+static inline s64 div_s64_rem(s64 dividend, s32 divisor, s32 *remainder)
+{
+        *remainder = dividend % divisor;
+        return dividend / divisor;
+}
+
+/**
+ * div64_u64 - unsigned 64bit divide with 64bit divisor
+ */
+static inline u64 div64_u64(u64 dividend, u64 divisor)
+{
+        return dividend / divisor;
+}
+
+#elif BITS_PER_LONG == 32
+
+#ifndef div_u64_rem
+static inline u64 div_u64_rem(u64 dividend, u32 divisor, u32 *remainder)
+{
+        *remainder = do_div(dividend, divisor);
+        return dividend;
+}
+#endif
+
+#ifndef div_s64_rem
+extern s64 div_s64_rem(s64 dividend, s32 divisor, s32 *remainder);
+#endif
+
+#ifndef div64_u64
+extern u64 div64_u64(u64 dividend, u64 divisor);
+#endif
+
+#endif /* BITS_PER_LONG */
+
+/**
+ * div_u64 - unsigned 64bit divide with 32bit divisor
+ *
+ * This is the most common 64bit divide and should be used if possible,
+ * as many 32bit archs can optimize this variant better than a full 64bit
+ * divide.
+ */
+#ifndef div_u64
+static inline u64 div_u64(u64 dividend, u32 divisor)
+{
+        u32 remainder;
+        return div_u64_rem(dividend, divisor, &remainder);
+}
+#endif
+
+/**
+ * div_s64 - signed 64bit divide with 32bit divisor
+ */
+#ifndef div_s64
+static inline s64 div_s64(s64 dividend, s32 divisor)
+{
+        s32 remainder;
+        return div_s64_rem(dividend, divisor, &remainder);
+}
+#endif
+
+#endif /* _LINUX_MATH64_H */
diff --git a/include/linux/module.h b/include/linux/module.h
index 819c4e889bf1..3e03b1acbc94 100644
--- a/include/linux/module.h
+++ b/include/linux/module.h
@@ -190,7 +190,7 @@ void *__symbol_get_gpl(const char *symbol);
         extern typeof(sym) sym;                                 \
         __CRC_SYMBOL(sym, sec)                                  \
         static const char __kstrtab_##sym[]                     \
-        __attribute__((section("__ksymtab_strings")))           \
+        __attribute__((section("__ksymtab_strings"), aligned(1))) \
         = MODULE_SYMBOL_PREFIX #sym;                            \
         static const struct kernel_symbol __ksymtab_##sym       \
         __used                                                  \
@@ -229,23 +229,6 @@ enum module_state
         MODULE_STATE_GOING,
 };
 
-/* Similar stuff for section attributes. */
-struct module_sect_attr
-{
-        struct module_attribute mattr;
-        char *name;
-        unsigned long address;
-};
-
-struct module_sect_attrs
-{
-        struct attribute_group grp;
-        int nsections;
-        struct module_sect_attr attrs[0];
-};
-
-struct module_param_attrs;
-
 struct module
 {
         enum module_state state;
diff --git a/include/linux/mtd/jedec.h b/include/linux/mtd/jedec.h
deleted file mode 100644
index 9006feb218b9..000000000000
--- a/include/linux/mtd/jedec.h
+++ /dev/null
@@ -1,66 +0,0 @@
-
-/* JEDEC Flash Interface.
- * This is an older type of interface for self programming flash. It is
- * commonly use in older AMD chips and is obsolete compared with CFI.
- * It is called JEDEC because the JEDEC association distributes the ID codes
- * for the chips.
- *
- * See the AMD flash databook for information on how to operate the interface.
- *
- * $Id: jedec.h,v 1.4 2005/11/07 11:14:54 gleixner Exp $
- */
-
-#ifndef __LINUX_MTD_JEDEC_H__
-#define __LINUX_MTD_JEDEC_H__
-
-#include <linux/types.h>
-
-#define MAX_JEDEC_CHIPS 16
-
-// Listing of all supported chips and their information
-struct JEDECTable
-{
-   __u16 jedec;
-   char *name;
-   unsigned long size;
-   unsigned long sectorsize;
-   __u32 capabilities;
-};
-
-// JEDEC being 0 is the end of the chip array
-struct jedec_flash_chip
-{
-   __u16 jedec;
-   unsigned long size;
-   unsigned long sectorsize;
-
-   // *(__u8*)(base + (adder << addrshift)) = data << datashift
-   // Address size = size << addrshift
-   unsigned long base;           // Byte 0 of the flash, will be unaligned
-   unsigned int datashift;       // Useful for 32bit/16bit accesses
-   unsigned int addrshift;
-   unsigned long offset;         // linerized start. base==offset for unbanked, uninterleaved flash
-
-   __u32 capabilities;
-
-   // These markers are filled in by the flash_chip_scan function
-   unsigned long start;
-   unsigned long length;
-};
-
-struct jedec_private
-{
-   unsigned long size;         // Total size of all the devices
-
-   /* Bank handling. If sum(bank_fill) == size then this is linear flash.
-      Otherwise the mapping has holes in it. bank_fill may be used to
-      find the holes, but in the common symetric case
-      bank_fill[0] == bank_fill[*], thus addresses may be computed
-      mathmatically. bank_fill must be powers of two */
-   unsigned is_banked;
-   unsigned long bank_fill[MAX_JEDEC_CHIPS];
-
-   struct jedec_flash_chip chips[MAX_JEDEC_CHIPS];
-};
-
-#endif
diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
index 0a13bb35f044..245f9098e171 100644
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -143,10 +143,12 @@ struct mtd_info {
         int (*erase) (struct mtd_info *mtd, struct erase_info *instr);
 
         /* This stuff for eXecute-In-Place */
-        int (*point) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char **mtdbuf);
+        /* phys is optional and may be set to NULL */
+        int (*point) (struct mtd_info *mtd, loff_t from, size_t len,
+                        size_t *retlen, void **virt, resource_size_t *phys);
 
         /* We probably shouldn't allow XIP if the unpoint isn't a NULL */
-        void (*unpoint) (struct mtd_info *mtd, u_char * addr, loff_t from, size_t len);
+        void (*unpoint) (struct mtd_info *mtd, loff_t from, size_t len);
 
 
         int (*read) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
diff --git a/include/linux/mtd/pmc551.h b/include/linux/mtd/pmc551.h
index a7f6d20ad407..5cc070c24d88 100644
--- a/include/linux/mtd/pmc551.h
+++ b/include/linux/mtd/pmc551.h
@@ -36,8 +36,9 @@ struct mypriv {
  * Function Prototypes
  */
 static int pmc551_erase(struct mtd_info *, struct erase_info *);
-static void pmc551_unpoint(struct mtd_info *, u_char *, loff_t, size_t);
-static int pmc551_point (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char **mtdbuf);
+static void pmc551_unpoint(struct mtd_info *, loff_t, size_t);
+static int pmc551_point(struct mtd_info *mtd, loff_t from, size_t len,
+                size_t *retlen, void **virt, resource_size_t *phys);
 static int pmc551_read(struct mtd_info *, loff_t, size_t, size_t *, u_char *);
 static int pmc551_write(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
 
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 96acd0dae241..509159bcd4e7 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -44,6 +44,7 @@
 #include <linux/mod_devicetable.h>
 
 #include <linux/types.h>
+#include <linux/init.h>
 #include <linux/ioport.h>
 #include <linux/list.h>
 #include <linux/compiler.h>
@@ -474,7 +475,7 @@ extern struct pci_bus *pci_find_bus(int domain, int busnr);
 void pci_bus_add_devices(struct pci_bus *bus);
 struct pci_bus *pci_scan_bus_parented(struct device *parent, int bus,
                                       struct pci_ops *ops, void *sysdata);
-static inline struct pci_bus *pci_scan_bus(int bus, struct pci_ops *ops,
+static inline struct pci_bus * __devinit pci_scan_bus(int bus, struct pci_ops *ops,
                                            void *sysdata)
 {
         struct pci_bus *root_bus;
@@ -666,7 +667,7 @@ int pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max,
 
 void pci_walk_bus(struct pci_bus *top, void (*cb)(struct pci_dev *, void *),
                   void *userdata);
-int pci_cfg_space_size_ext(struct pci_dev *dev, unsigned check_exp_pcix);
+int pci_cfg_space_size_ext(struct pci_dev *dev);
 int pci_cfg_space_size(struct pci_dev *dev);
 unsigned char pci_bus_max_busnr(struct pci_bus *bus);
 
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index e5a53daf17f1..cf6dbd759395 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1429,6 +1429,7 @@
 #define PCI_DEVICE_ID_NEO_2DB9PRI       0x00C9
 #define PCI_DEVICE_ID_NEO_2RJ45         0x00CA
 #define PCI_DEVICE_ID_NEO_2RJ45PRI      0x00CB
+#define PCIE_DEVICE_ID_NEO_4_IBM        0x00F4
 
 #define PCI_VENDOR_ID_XIRCOM            0x115d
 #define PCI_DEVICE_ID_XIRCOM_RBM56G     0x0101
diff --git a/include/linux/pda_power.h b/include/linux/pda_power.h
index 225beb136807..cb7d10f30763 100644
--- a/include/linux/pda_power.h
+++ b/include/linux/pda_power.h
@@ -16,10 +16,14 @@
 #define PDA_POWER_CHARGE_AC  (1 << 0)
 #define PDA_POWER_CHARGE_USB (1 << 1)
 
+struct device;
+
 struct pda_power_pdata {
+        int (*init)(struct device *dev);
         int (*is_ac_online)(void);
         int (*is_usb_online)(void);
         void (*set_charge)(int flags);
+        void (*exit)(struct device *dev);
 
         char **supplied_to;
         size_t num_supplicants;
diff --git a/include/linux/poll.h b/include/linux/poll.h
index 16d813b364ef..ef453828877a 100644
--- a/include/linux/poll.h
+++ b/include/linux/poll.h
@@ -117,6 +117,8 @@ void zero_fd_set(unsigned long nr, unsigned long *fdset)
 extern int do_select(int n, fd_set_bits *fds, s64 *timeout);
 extern int do_sys_poll(struct pollfd __user * ufds, unsigned int nfds,
                        s64 *timeout);
+extern int core_sys_select(int n, fd_set __user *inp, fd_set __user *outp,
+                           fd_set __user *exp, s64 *timeout);
 
 #endif /* KERNEL */
 
diff --git a/include/linux/quota.h b/include/linux/quota.h
index 52e49dce6584..dcddfb200947 100644
--- a/include/linux/quota.h
+++ b/include/linux/quota.h
@@ -347,6 +347,9 @@ struct quota_info {
         ((type) == USRQUOTA ? (sb_dqopt(sb)->flags & DQUOT_USR_SUSPENDED) : \
                               (sb_dqopt(sb)->flags & DQUOT_GRP_SUSPENDED))
 
+#define sb_any_quota_suspended(sb) (sb_has_quota_suspended(sb, USRQUOTA) | \
+                                  sb_has_quota_suspended(sb, GRPQUOTA))
+
 int register_quota_format(struct quota_format_type *fmt);
 void unregister_quota_format(struct quota_format_type *fmt);
 
diff --git a/include/linux/rio.h b/include/linux/rio.h
index c1c99c9643d3..dc0c75556c63 100644
--- a/include/linux/rio.h
+++ b/include/linux/rio.h
@@ -161,6 +161,8 @@ enum rio_phy_type {
  * @ops: configuration space functions
  * @id: Port ID, unique among all ports
  * @index: Port index, unique among all port interfaces of the same type
+ * @sys_size: RapidIO common transport system size
+ * @phy_type: RapidIO phy type
  * @name: Port name string
  * @priv: Master port private data
  */
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 03c238088aee..0c35b0343a76 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -158,6 +158,8 @@ print_cfs_rq(struct seq_file *m, int cpu, struct cfs_rq *cfs_rq)
 }
 #endif
 
+extern unsigned long long time_sync_thresh;
+
 /*
  * Task state bitmask. NOTE! These bits are also
  * encoded in fs/proc/array.c: get_task_state().
@@ -1551,6 +1553,35 @@ static inline int set_cpus_allowed(struct task_struct *p, cpumask_t new_mask)
 
 extern unsigned long long sched_clock(void);
 
+#ifndef CONFIG_HAVE_UNSTABLE_SCHED_CLOCK
+static inline void sched_clock_init(void)
+{
+}
+
+static inline u64 sched_clock_cpu(int cpu)
+{
+        return sched_clock();
+}
+
+static inline void sched_clock_tick(void)
+{
+}
+
+static inline void sched_clock_idle_sleep_event(void)
+{
+}
+
+static inline void sched_clock_idle_wakeup_event(u64 delta_ns)
+{
+}
+#else
+extern void sched_clock_init(void);
+extern u64 sched_clock_cpu(int cpu);
+extern void sched_clock_tick(void);
+extern void sched_clock_idle_sleep_event(void);
+extern void sched_clock_idle_wakeup_event(u64 delta_ns);
+#endif
+
 /*
  * For kernel-internal use: high-speed (but slightly incorrect) per-cpu
  * clock constructed from sched_clock():
@@ -1977,6 +2008,11 @@ static inline void clear_tsk_need_resched(struct task_struct *tsk)
         clear_tsk_thread_flag(tsk,TIF_NEED_RESCHED);
 }
 
+static inline int test_tsk_need_resched(struct task_struct *tsk)
+{
+        return unlikely(test_tsk_thread_flag(tsk,TIF_NEED_RESCHED));
+}
+
 static inline int signal_pending(struct task_struct *p)
 {
         return unlikely(test_tsk_thread_flag(p,TIF_SIGPENDING));
@@ -1991,7 +2027,7 @@ static inline int fatal_signal_pending(struct task_struct *p)
 
 static inline int need_resched(void)
 {
-        return unlikely(test_thread_flag(TIF_NEED_RESCHED));
+        return unlikely(test_tsk_need_resched(current));
 }
 
 /*
diff --git a/include/linux/string.h b/include/linux/string.h
index c5d3fcad7b57..efdc44593b52 100644
--- a/include/linux/string.h
+++ b/include/linux/string.h
@@ -109,5 +109,7 @@ extern void *kmemdup(const void *src, size_t len, gfp_t gfp);
 extern char **argv_split(gfp_t gfp, const char *str, int *argcp);
 extern void argv_free(char **argv);
 
+extern bool sysfs_streq(const char *s1, const char *s2);
+
 #endif
 #endif /* _LINUX_STRING_H_ */
diff --git a/include/linux/timex.h b/include/linux/timex.h
index 8ea3e71ba7fa..fc6035d29d56 100644
--- a/include/linux/timex.h
+++ b/include/linux/timex.h
@@ -58,6 +58,8 @@
 
 #include <asm/param.h>
 
+#define NTP_API         4       /* NTP API version */
+
 /*
  * SHIFT_KG and SHIFT_KF establish the damping of the PLL and are chosen
  * for a slightly underdamped convergence characteristic. SHIFT_KH
@@ -74,24 +76,22 @@
 #define MAXTC           10      /* maximum time constant (shift) */
 
 /*
- * The SHIFT_UPDATE define establishes the decimal point of the
- * time_offset variable which represents the current offset with
- * respect to standard time.
- *
  * SHIFT_USEC defines the scaling (shift) of the time_freq and
  * time_tolerance variables, which represent the current frequency
  * offset and maximum frequency tolerance.
  */
-#define SHIFT_UPDATE (SHIFT_HZ + 1) /* time offset scale (shift) */
 #define SHIFT_USEC 16           /* frequency offset scale (shift) */
-#define SHIFT_NSEC 12           /* kernel frequency offset scale */
-
-#define MAXPHASE 512000L        /* max phase error (us) */
-#define MAXFREQ (512L << SHIFT_USEC)  /* max frequency error (ppm) */
-#define MAXFREQ_NSEC (512000L << SHIFT_NSEC) /* max frequency error (ppb) */
+#define PPM_SCALE (NSEC_PER_USEC << (NTP_SCALE_SHIFT - SHIFT_USEC))
+#define PPM_SCALE_INV_SHIFT 20
+#define PPM_SCALE_INV ((1ll << (PPM_SCALE_INV_SHIFT + NTP_SCALE_SHIFT)) / \
+                       PPM_SCALE + 1)
+
+#define MAXPHASE 500000000l     /* max phase error (ns) */
+#define MAXFREQ 500000          /* max frequency error (ns/s) */
+#define MAXFREQ_SCALED ((s64)MAXFREQ << NTP_SCALE_SHIFT)
 #define MINSEC 256              /* min interval between updates (s) */
 #define MAXSEC 2048             /* max interval between updates (s) */
-#define NTP_PHASE_LIMIT (MAXPHASE << 5) /* beyond max. dispersion */
+#define NTP_PHASE_LIMIT ((MAXPHASE / NSEC_PER_USEC) << 5) /* beyond max. dispersion */
 
 /*
  * syscall interface - used (mainly by NTP daemon)
@@ -121,9 +121,11 @@ struct timex {
         long errcnt;            /* calibration errors (ro) */
         long stbcnt;            /* stability limit exceeded (ro) */
 
+        int tai;                /* TAI offset (ro) */
+
         int  :32; int  :32; int  :32; int  :32;
         int  :32; int  :32; int  :32; int  :32;
-        int  :32; int  :32; int  :32; int  :32;
+        int  :32; int  :32; int  :32;
 };
 
 /*
@@ -135,6 +137,9 @@ struct timex {
 #define ADJ_ESTERROR            0x0008  /* estimated time error */
 #define ADJ_STATUS              0x0010  /* clock status */
 #define ADJ_TIMECONST           0x0020  /* pll time constant */
+#define ADJ_TAI                 0x0080  /* set TAI offset */
+#define ADJ_MICRO               0x1000  /* select microsecond resolution */
+#define ADJ_NANO                0x2000  /* select nanosecond resolution */
 #define ADJ_TICK                0x4000  /* tick value */
 #define ADJ_OFFSET_SINGLESHOT   0x8001  /* old-fashioned adjtime */
 #define ADJ_OFFSET_SS_READ      0xa001  /* read-only adjtime */
@@ -146,8 +151,6 @@ struct timex {
 #define MOD_ESTERROR    ADJ_ESTERROR
 #define MOD_STATUS      ADJ_STATUS
 #define MOD_TIMECONST   ADJ_TIMECONST
-#define MOD_CLKB        ADJ_TICK
-#define MOD_CLKA        ADJ_OFFSET_SINGLESHOT /* 0x8000 in original */
 
 
 /*
@@ -169,9 +172,13 @@ struct timex {
 #define STA_PPSERROR    0x0800  /* PPS signal calibration error (ro) */
 
 #define STA_CLOCKERR    0x1000  /* clock hardware fault (ro) */
+#define STA_NANO        0x2000  /* resolution (0 = us, 1 = ns) (ro) */
+#define STA_MODE        0x4000  /* mode (0 = PLL, 1 = FLL) (ro) */
+#define STA_CLK         0x8000  /* clock source (0 = A, 1 = B) (ro) */
 
+/* read-only bits */
 #define STA_RONLY (STA_PPSSIGNAL | STA_PPSJITTER | STA_PPSWANDER | \
-    STA_PPSERROR | STA_CLOCKERR) /* read-only bits */
+        STA_PPSERROR | STA_CLOCKERR | STA_NANO | STA_MODE | STA_CLK)
 
 /*
  * Clock states (time_state)
@@ -203,10 +210,9 @@ extern int time_status;		/* clock synchronization status bits */
 extern long time_maxerror;      /* maximum error */
 extern long time_esterror;      /* estimated error */
 
-extern long time_freq;          /* frequency offset (scaled ppm) */
-
 extern long time_adjust;        /* The amount of adjtime left */
 
+extern void ntp_init(void);
 extern void ntp_clear(void);
 
 /**
@@ -225,7 +231,7 @@ static inline int ntp_synced(void)
         __x < 0 ? -(-__x >> __s) : __x >> __s;  \
 })
 
-#define TICK_LENGTH_SHIFT       32
+#define NTP_SCALE_SHIFT         32
 
 #ifdef CONFIG_NO_HZ
 #define NTP_INTERVAL_FREQ  (2)
@@ -234,8 +240,8 @@ static inline int ntp_synced(void)
 #endif
 #define NTP_INTERVAL_LENGTH (NSEC_PER_SEC/NTP_INTERVAL_FREQ)
 
-/* Returns how long ticks are at present, in ns / 2^(SHIFT_SCALE-10). */
-extern u64 current_tick_length(void);
+/* Returns how long ticks are at present, in ns / 2^NTP_SCALE_SHIFT. */
+extern u64 tick_length;
 
 extern void second_overflow(void);
 extern void update_ntp_one_tick(void);
diff --git a/include/linux/usb/c67x00.h b/include/linux/usb/c67x00.h
new file mode 100644
index 000000000000..83c6b45470ca
--- /dev/null
+++ b/include/linux/usb/c67x00.h
@@ -0,0 +1,48 @@
+/*
+ * usb_c67x00.h: platform definitions for the Cypress C67X00 USB chip
+ *
+ * Copyright (C) 2006-2008 Barco N.V.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA  02110-1301  USA.
+ */
+
+#ifndef _LINUX_USB_C67X00_H
+#define _LINUX_USB_C67X00_H
+
+/* SIE configuration */
+#define C67X00_SIE_UNUSED       0
+#define C67X00_SIE_HOST         1
+#define C67X00_SIE_PERIPHERAL_A 2       /* peripheral on A port */
+#define C67X00_SIE_PERIPHERAL_B 3       /* peripheral on B port */
+
+#define c67x00_sie_config(config, n)  (((config)>>(4*(n)))&0x3)
+
+#define C67X00_SIE1_UNUSED              (C67X00_SIE_UNUSED              << 0)
+#define C67X00_SIE1_HOST                (C67X00_SIE_HOST                << 0)
+#define C67X00_SIE1_PERIPHERAL_A        (C67X00_SIE_PERIPHERAL_A        << 0)
+#define C67X00_SIE1_PERIPHERAL_B        (C67X00_SIE_PERIPHERAL_B        << 0)
+
+#define C67X00_SIE2_UNUSED              (C67X00_SIE_UNUSED              << 4)
+#define C67X00_SIE2_HOST                (C67X00_SIE_HOST                << 4)
+#define C67X00_SIE2_PERIPHERAL_A        (C67X00_SIE_PERIPHERAL_A        << 4)
+#define C67X00_SIE2_PERIPHERAL_B        (C67X00_SIE_PERIPHERAL_B        << 4)
+
+struct c67x00_platform_data {
+        int sie_config;                 /* SIEs config (C67X00_SIEx_*) */
+        unsigned long hpi_regstep;      /* Step between HPI registers  */
+};
+
+#endif /* _LINUX_USB_C67X00_H */
diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h
index 7e0d3084f76c..73a2f4eb1f7a 100644
--- a/include/linux/usb/ch9.h
+++ b/include/linux/usb/ch9.h
@@ -455,7 +455,7 @@ struct usb_encryption_descriptor {
 
 /*-------------------------------------------------------------------------*/
 
-/* USB_DT_BOS:  group of wireless capabilities */
+/* USB_DT_BOS:  group of device-level capabilities */
 struct usb_bos_descriptor {
         __u8  bLength;
         __u8  bDescriptorType;
@@ -501,6 +501,16 @@ struct usb_wireless_cap_descriptor {	/* Ultra Wide Band */
         __u8  bReserved;
 } __attribute__((packed));
 
+#define USB_CAP_TYPE_EXT                2
+
+struct usb_ext_cap_descriptor {         /* Link Power Management */
+        __u8  bLength;
+        __u8  bDescriptorType;
+        __u8  bDevCapabilityType;
+        __u8  bmAttributes;
+#define USB_LPM_SUPPORT                 (1 << 1)        /* supports LPM */
+} __attribute__((packed));
+
 /*-------------------------------------------------------------------------*/
 
 /* USB_DT_WIRELESS_ENDPOINT_COMP:  companion descriptor associated with
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index d8128f7102c9..cf468fbdbf8e 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -114,6 +114,8 @@ struct usb_ep_ops {
         int (*dequeue) (struct usb_ep *ep, struct usb_request *req);
 
         int (*set_halt) (struct usb_ep *ep, int value);
+        int (*set_wedge) (struct usb_ep *ep);
+
         int (*fifo_status) (struct usb_ep *ep);
         void (*fifo_flush) (struct usb_ep *ep);
 };
@@ -349,6 +351,25 @@ static inline int usb_ep_clear_halt(struct usb_ep *ep)
 }
 
 /**
+ * usb_ep_set_wedge - sets the halt feature and ignores clear requests
+ * @ep: the endpoint being wedged
+ *
+ * Use this to stall an endpoint and ignore CLEAR_FEATURE(HALT_ENDPOINT)
+ * requests. If the gadget driver clears the halt status, it will
+ * automatically unwedge the endpoint.
+ *
+ * Returns zero on success, else negative errno.
+ */
+static inline int
+usb_ep_set_wedge(struct usb_ep *ep)
+{
+        if (ep->ops->set_wedge)
+                return ep->ops->set_wedge(ep);
+        else
+                return ep->ops->set_halt(ep, 1);
+}
+
+/**
  * usb_ep_fifo_status - returns number of bytes in fifo, or error
  * @ep: the endpoint whose fifo status is being checked.
  *
diff --git a/include/linux/virtio.h b/include/linux/virtio.h
index e7d10845b3c1..06005fa9e982 100644
--- a/include/linux/virtio.h
+++ b/include/linux/virtio.h
@@ -76,6 +76,7 @@ struct virtqueue_ops {
  * @dev: underlying device.
  * @id: the device type identification (used to match it with a driver).
  * @config: the configuration ops for this device.
+ * @features: the features supported by both driver and device.
  * @priv: private pointer for the driver's use.
  */
 struct virtio_device
@@ -84,6 +85,8 @@ struct virtio_device
         struct device dev;
         struct virtio_device_id id;
         struct virtio_config_ops *config;
+        /* Note that this is a Linux set_bit-style bitmap. */
+        unsigned long features[1];
         void *priv;
 };
 
@@ -94,6 +97,8 @@ void unregister_virtio_device(struct virtio_device *dev);
  * virtio_driver - operations for a virtio I/O driver
  * @driver: underlying device driver (populate name and owner).
  * @id_table: the ids serviced by this driver.
+ * @feature_table: an array of feature numbers supported by this device.
+ * @feature_table_size: number of entries in the feature table array.
  * @probe: the function to call when a device is found.  Returns a token for
  *    remove, or PTR_ERR().
  * @remove: the function when a device is removed.
@@ -103,6 +108,8 @@ void unregister_virtio_device(struct virtio_device *dev);
 struct virtio_driver {
         struct device_driver driver;
         const struct virtio_device_id *id_table;
+        const unsigned int *feature_table;
+        unsigned int feature_table_size;
         int (*probe)(struct virtio_device *dev);
         void (*remove)(struct virtio_device *dev);
         void (*config_changed)(struct virtio_device *dev);
diff --git a/include/linux/virtio_blk.h b/include/linux/virtio_blk.h
index bca0b10d7947..d4695a3356d0 100644
--- a/include/linux/virtio_blk.h
+++ b/include/linux/virtio_blk.h
@@ -9,6 +9,7 @@
 #define VIRTIO_BLK_F_BARRIER    0       /* Does host support barriers? */
 #define VIRTIO_BLK_F_SIZE_MAX   1       /* Indicates maximum segment size */
 #define VIRTIO_BLK_F_SEG_MAX    2       /* Indicates maximum # of segments */
+#define VIRTIO_BLK_F_GEOMETRY   4       /* Legacy geometry available  */
 
 struct virtio_blk_config
 {
@@ -18,6 +19,12 @@ struct virtio_blk_config
         __le32 size_max;
         /* The maximum number of segments (if VIRTIO_BLK_F_SEG_MAX) */
         __le32 seg_max;
+        /* geometry the device (if VIRTIO_BLK_F_GEOMETRY) */
+        struct virtio_blk_geometry {
+                __le16 cylinders;
+                __u8 heads;
+                __u8 sectors;
+        } geometry;
 } __attribute__((packed));
 
 /* These two define direction. */
@@ -41,13 +48,8 @@ struct virtio_blk_outhdr
         __u64 sector;
 };
 
+/* And this is the final byte of the write scatter-gather list. */
 #define VIRTIO_BLK_S_OK         0
 #define VIRTIO_BLK_S_IOERR      1
 #define VIRTIO_BLK_S_UNSUPP     2
-
-/* This is the first element of the write scatter-gather list */
-struct virtio_blk_inhdr
-{
-        unsigned char status;
-};
 #endif /* _LINUX_VIRTIO_BLK_H */
diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h
index d581b2914b34..50db245c81ad 100644
--- a/include/linux/virtio_config.h
+++ b/include/linux/virtio_config.h
@@ -16,27 +16,20 @@
 #define VIRTIO_CONFIG_S_FAILED          0x80
 
 #ifdef __KERNEL__
-struct virtio_device;
+#include <linux/virtio.h>
 
 /**
  * virtio_config_ops - operations for configuring a virtio device
- * @feature: search for a feature in this config
- *      vdev: the virtio_device
- *      bit: the feature bit
- *      Returns true if the feature is supported.  Acknowledges the feature
- *      so the host can see it.
  * @get: read the value of a configuration field
  *      vdev: the virtio_device
  *      offset: the offset of the configuration field
  *      buf: the buffer to write the field value into.
  *      len: the length of the buffer
- *      Note that contents are conventionally little-endian.
  * @set: write the value of a configuration field
  *      vdev: the virtio_device
  *      offset: the offset of the configuration field
  *      buf: the buffer to read the field value from.
  *      len: the length of the buffer
- *      Note that contents are conventionally little-endian.
  * @get_status: read the status byte
  *      vdev: the virtio_device
  *      Returns the status byte
@@ -52,10 +45,15 @@ struct virtio_device;
  *      callback: the virqtueue callback
  *      Returns the new virtqueue or ERR_PTR() (eg. -ENOENT).
  * @del_vq: free a virtqueue found by find_vq().
+ * @get_features: get the array of feature bits for this device.
+ *      vdev: the virtio_device
+ *      Returns the first 32 feature bits (all we currently need).
+ * @set_features: confirm what device features we'll be using.
+ *      vdev: the virtio_device
+ *      feature: the first 32 feature bits
  */
 struct virtio_config_ops
 {
-        bool (*feature)(struct virtio_device *vdev, unsigned bit);
         void (*get)(struct virtio_device *vdev, unsigned offset,
                     void *buf, unsigned len);
         void (*set)(struct virtio_device *vdev, unsigned offset,
@@ -67,43 +65,52 @@ struct virtio_config_ops
                                      unsigned index,
                                      void (*callback)(struct virtqueue *));
         void (*del_vq)(struct virtqueue *vq);
+        u32 (*get_features)(struct virtio_device *vdev);
+        void (*set_features)(struct virtio_device *vdev, u32 features);
 };
 
+/* If driver didn't advertise the feature, it will never appear. */
+void virtio_check_driver_offered_feature(const struct virtio_device *vdev,
+                                         unsigned int fbit);
+
 /**
- * virtio_config_val - look for a feature and get a single virtio config.
- * @vdev: the virtio device
+ * virtio_has_feature - helper to determine if this device has this feature.
+ * @vdev: the device
  * @fbit: the feature bit
- * @offset: the type to search for.
- * @val: a pointer to the value to fill in.
- *
- * The return value is -ENOENT if the feature doesn't exist.  Otherwise
- * the value is endian-corrected and returned in v. */
-#define virtio_config_val(vdev, fbit, offset, v) ({                     \
-        int _err;                                                       \
-        if ((vdev)->config->feature((vdev), (fbit))) {                  \
-                __virtio_config_val((vdev), (offset), (v));             \
-                _err = 0;                                               \
-        } else                                                          \
-                _err = -ENOENT;                                         \
-        _err;                                                           \
-})
+ */
+static inline bool virtio_has_feature(const struct virtio_device *vdev,
+                                      unsigned int fbit)
+{
+        /* Did you forget to fix assumptions on max features? */
+        if (__builtin_constant_p(fbit))
+                BUILD_BUG_ON(fbit >= 32);
+
+        virtio_check_driver_offered_feature(vdev, fbit);
+        return test_bit(fbit, vdev->features);
+}
 
 /**
- * __virtio_config_val - get a single virtio config without feature check.
+ * virtio_config_val - look for a feature and get a virtio config entry.
  * @vdev: the virtio device
+ * @fbit: the feature bit
  * @offset: the type to search for.
  * @val: a pointer to the value to fill in.
  *
- * The value is endian-corrected and returned in v. */
-#define __virtio_config_val(vdev, offset, v) do {                       \
-        BUILD_BUG_ON(sizeof(*(v)) != 1 && sizeof(*(v)) != 2             \
-                     && sizeof(*(v)) != 4 && sizeof(*(v)) != 8);        \
-        (vdev)->config->get((vdev), (offset), (v), sizeof(*(v)));       \
-        switch (sizeof(*(v))) {                                         \
-        case 2: le16_to_cpus((__u16 *) v); break;                       \
-        case 4: le32_to_cpus((__u32 *) v); break;                       \
-        case 8: le64_to_cpus((__u64 *) v); break;                       \
-        }                                                               \
-} while(0)
+ * The return value is -ENOENT if the feature doesn't exist.  Otherwise
+ * the config value is copied into whatever is pointed to by v. */
+#define virtio_config_val(vdev, fbit, offset, v) \
+        virtio_config_buf((vdev), (fbit), (offset), (v), sizeof(v))
+
+static inline int virtio_config_buf(struct virtio_device *vdev,
+                                    unsigned int fbit,
+                                    unsigned int offset,
+                                    void *buf, unsigned len)
+{
+        if (!virtio_has_feature(vdev, fbit))
+                return -ENOENT;
+
+        vdev->config->get(vdev, offset, buf, len);
+        return 0;
+}
 #endif /* __KERNEL__ */
 #endif /* _LINUX_VIRTIO_CONFIG_H */
diff --git a/include/linux/virtio_net.h b/include/linux/virtio_net.h
index 1ea3351df609..9405aa6cdf26 100644
--- a/include/linux/virtio_net.h
+++ b/include/linux/virtio_net.h
@@ -6,9 +6,18 @@
 #define VIRTIO_ID_NET   1
 
 /* The feature bitmap for virtio net */
-#define VIRTIO_NET_F_CSUM       0       /* Can handle pkts w/ partial csum */
+#define VIRTIO_NET_F_CSUM       0       /* Host handles pkts w/ partial csum */
+#define VIRTIO_NET_F_GUEST_CSUM 1       /* Guest handles pkts w/ partial csum */
 #define VIRTIO_NET_F_MAC        5       /* Host has given MAC address. */
-#define VIRTIO_NET_F_GSO        6       /* Can handle pkts w/ any GSO type */
+#define VIRTIO_NET_F_GSO        6       /* Host handles pkts w/ any GSO type */
+#define VIRTIO_NET_F_GUEST_TSO4 7       /* Guest can handle TSOv4 in. */
+#define VIRTIO_NET_F_GUEST_TSO6 8       /* Guest can handle TSOv6 in. */
+#define VIRTIO_NET_F_GUEST_ECN  9       /* Guest can handle TSO[6] w/ ECN in. */
+#define VIRTIO_NET_F_GUEST_UFO  10      /* Guest can handle UFO in. */
+#define VIRTIO_NET_F_HOST_TSO4  11      /* Host can handle TSOv4 in. */
+#define VIRTIO_NET_F_HOST_TSO6  12      /* Host can handle TSOv6 in. */
+#define VIRTIO_NET_F_HOST_ECN   13      /* Host can handle TSO[6] w/ ECN in. */
+#define VIRTIO_NET_F_HOST_UFO   14      /* Host can handle UFO in. */
 
 struct virtio_net_config
 {
diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h
index 1f74bcd603fe..32742c4563de 100644
--- a/include/scsi/scsi.h
+++ b/include/scsi/scsi.h
@@ -30,13 +30,6 @@
 #endif
 
 /*
- *      SCSI command lengths
- */
-
-extern const unsigned char scsi_command_size[8];
-#define COMMAND_SIZE(opcode) scsi_command_size[((opcode) >> 5) & 7]
-
-/*
  * Special value for scanning to specify scanning or rescanning of all
  * possible channels, (target) ids, or luns on a given shost.
  */
@@ -109,6 +102,7 @@ extern const unsigned char scsi_command_size[8];
 #define MODE_SENSE_10         0x5a
 #define PERSISTENT_RESERVE_IN 0x5e
 #define PERSISTENT_RESERVE_OUT 0x5f
+#define VARIABLE_LENGTH_CMD   0x7f
 #define REPORT_LUNS           0xa0
 #define MAINTENANCE_IN        0xa3
 #define MOVE_MEDIUM           0xa5
@@ -136,6 +130,38 @@ extern const unsigned char scsi_command_size[8];
 #define ATA_12                0xa1      /* 12-byte pass-thru */
 
 /*
+ *      SCSI command lengths
+ */
+
+#define SCSI_MAX_VARLEN_CDB_SIZE 260
+
+/* defined in T10 SCSI Primary Commands-2 (SPC2) */
+struct scsi_varlen_cdb_hdr {
+        u8 opcode;        /* opcode always == VARIABLE_LENGTH_CMD */
+        u8 control;
+        u8 misc[5];
+        u8 additional_cdb_length;         /* total cdb length - 8 */
+        __be16 service_action;
+        /* service specific data follows */
+};
+
+static inline unsigned
+scsi_varlen_cdb_length(const void *hdr)
+{
+        return ((struct scsi_varlen_cdb_hdr *)hdr)->additional_cdb_length + 8;
+}
+
+extern const unsigned char scsi_command_size_tbl[8];
+#define COMMAND_SIZE(opcode) scsi_command_size_tbl[((opcode) >> 5) & 7]
+
+static inline unsigned
+scsi_command_size(const unsigned char *cmnd)
+{
+        return (cmnd[0] == VARIABLE_LENGTH_CMD) ?
+                scsi_varlen_cdb_length(cmnd) : COMMAND_SIZE(cmnd[0]);
+}
+
+/*
  *  SCSI Architecture Model (SAM) Status codes. Taken from SAM-3 draft
  *  T10/1561-D Revision 4 Draft dated 7th November 2002.
  */
diff --git a/include/scsi/scsi_cmnd.h b/include/scsi/scsi_cmnd.h
index 8d20e60a94b7..3e46dfae8194 100644
--- a/include/scsi/scsi_cmnd.h
+++ b/include/scsi/scsi_cmnd.h
@@ -7,10 +7,28 @@
 #include <linux/types.h>
 #include <linux/timer.h>
 #include <linux/scatterlist.h>
+#include <linux/blkdev.h>
 
 struct Scsi_Host;
 struct scsi_device;
 
+/*
+ * MAX_COMMAND_SIZE is:
+ * The longest fixed-length SCSI CDB as per the SCSI standard.
+ * fixed-length means: commands that their size can be determined
+ * by their opcode and the CDB does not carry a length specifier, (unlike
+ * the VARIABLE_LENGTH_CMD(0x7f) command). This is actually not exactly
+ * true and the SCSI standard also defines extended commands and
+ * vendor specific commands that can be bigger than 16 bytes. The kernel
+ * will support these using the same infrastructure used for VARLEN CDB's.
+ * So in effect MAX_COMMAND_SIZE means the maximum size command scsi-ml
+ * supports without specifying a cmd_len by ULD's
+ */
+#define MAX_COMMAND_SIZE 16
+#if (MAX_COMMAND_SIZE > BLK_MAX_CDB)
+# error MAX_COMMAND_SIZE can not be bigger than BLK_MAX_CDB
+#endif
+
 struct scsi_data_buffer {
         struct sg_table table;
         unsigned length;
@@ -60,12 +78,11 @@ struct scsi_cmnd {
         int allowed;
         int timeout_per_command;
 
-        unsigned char cmd_len;
+        unsigned short cmd_len;
         enum dma_data_direction sc_data_direction;
 
         /* These elements define the operation we are about to perform */
-#define MAX_COMMAND_SIZE        16
-        unsigned char cmnd[MAX_COMMAND_SIZE];
+        unsigned char *cmnd;
 
         struct timer_list eh_timeout;   /* Used to time out the command. */
 
diff --git a/include/scsi/scsi_eh.h b/include/scsi/scsi_eh.h
index d3a133b4a072..2a9add21267d 100644
--- a/include/scsi/scsi_eh.h
+++ b/include/scsi/scsi_eh.h
@@ -75,11 +75,11 @@ struct scsi_eh_save {
         int result;
         enum dma_data_direction data_direction;
         unsigned char cmd_len;
-        unsigned char cmnd[MAX_COMMAND_SIZE];
+        unsigned char *cmnd;
         struct scsi_data_buffer sdb;
         struct request *next_rq;
-
         /* new command support */
+        unsigned char eh_cmnd[BLK_MAX_CDB];
         struct scatterlist sense_sgl;
 };
 
diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h
index d967d6dc7a28..1834fdfe82a7 100644
--- a/include/scsi/scsi_host.h
+++ b/include/scsi/scsi_host.h
@@ -573,13 +573,11 @@ struct Scsi_Host {
         /*
          * The maximum length of SCSI commands that this host can accept.
          * Probably 12 for most host adapters, but could be 16 for others.
+         * or 260 if the driver supports variable length cdbs.
          * For drivers that don't set this field, a value of 12 is
-         * assumed.  I am leaving this as a number rather than a bit
-         * because you never know what subsequent SCSI standards might do
-         * (i.e. could there be a 20 byte or a 24-byte command a few years
-         * down the road?).  
+         * assumed.
          */
-        unsigned char max_cmd_len;
+        unsigned short max_cmd_len;
 
         int this_id;
         int can_queue;
diff --git a/init/Kconfig b/init/Kconfig
index 3e7b257fc05f..4c33316743f5 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -316,9 +316,16 @@ config CPUSETS
 
           Say N if unsure.
 
+#
+# Architectures with an unreliable sched_clock() should select this:
+#
+config HAVE_UNSTABLE_SCHED_CLOCK
+        bool
+
 config GROUP_SCHED
         bool "Group CPU scheduler"
-        default y
+        depends on EXPERIMENTAL
+        default n
         help
           This feature lets CPU scheduler recognize task groups and control CPU
           bandwidth allocation to such task groups.
@@ -326,7 +333,7 @@ config GROUP_SCHED
 config FAIR_GROUP_SCHED
         bool "Group scheduling for SCHED_OTHER"
         depends on GROUP_SCHED
-        default y
+        default GROUP_SCHED
 
 config RT_GROUP_SCHED
         bool "Group scheduling for SCHED_RR/FIFO"
@@ -720,7 +727,7 @@ config VM_EVENT_COUNTERS
 config SLUB_DEBUG
         default y
         bool "Enable SLUB debugging support" if EMBEDDED
-        depends on SLUB
+        depends on SLUB && SYSFS
         help
           SLUB has extensive debug support features. Disabling these can
           result in significant savings in code size. This also disables
@@ -825,6 +832,15 @@ menuconfig MODULES
 
           If unsure, say Y.
 
+config MODULE_FORCE_LOAD
+        bool "Forced module loading"
+        depends on MODULES
+        default n
+        help
+          This option allows loading of modules even if that would set the
+          'F' (forced) taint, due to lack of version info.  Which is
+          usually a really bad idea.
+
 config MODULE_UNLOAD
         bool "Module unloading"
         depends on MODULES
diff --git a/init/main.c b/init/main.c
index a87d4ca5c36c..ddada7acf363 100644
--- a/init/main.c
+++ b/init/main.c
@@ -602,6 +602,7 @@ asmlinkage void __init start_kernel(void)
         softirq_init();
         timekeeping_init();
         time_init();
+        sched_clock_init();
         profile_init();
         if (!irqs_disabled())
                 printk("start_kernel(): bug: interrupts were enabled early\n");
diff --git a/ipc/mqueue.c b/ipc/mqueue.c
index 94fd3b08fb77..b3b69fd51330 100644
--- a/ipc/mqueue.c
+++ b/ipc/mqueue.c
@@ -673,7 +673,7 @@ asmlinkage long sys_mq_open(const char __user *u_name, int oflag, mode_t mode,
         if (IS_ERR(name = getname(u_name)))
                 return PTR_ERR(name);
 
-        fd = get_unused_fd();
+        fd = get_unused_fd_flags(O_CLOEXEC);
         if (fd < 0)
                 goto out_putname;
 
@@ -709,7 +709,6 @@ asmlinkage long sys_mq_open(const char __user *u_name, int oflag, mode_t mode,
                 goto out_putfd;
         }
 
-        set_close_on_exec(fd, 1);
         fd_install(fd, filp);
         goto out_upsem;
 
diff --git a/kernel/Makefile b/kernel/Makefile
index 188c43223f52..1c9938addb9d 100644
--- a/kernel/Makefile
+++ b/kernel/Makefile
@@ -9,7 +9,7 @@ obj-y     = sched.o fork.o exec_domain.o panic.o printk.o profile.o \
             rcupdate.o extable.o params.o posix-timers.o \
             kthread.o wait.o kfifo.o sys_ni.o posix-cpu-timers.o mutex.o \
             hrtimer.o rwsem.o nsproxy.o srcu.o semaphore.o \
-            notifier.o ksysfs.o pm_qos_params.o
+            notifier.o ksysfs.o pm_qos_params.o sched_clock.o
 
 obj-$(CONFIG_SYSCTL_SYSCALL_CHECK) += sysctl_check.o
 obj-$(CONFIG_STACKTRACE) += stacktrace.o
diff --git a/kernel/compat.c b/kernel/compat.c
index 4a856a3643bb..32c254a8ab9a 100644
--- a/kernel/compat.c
+++ b/kernel/compat.c
@@ -955,7 +955,8 @@ asmlinkage long compat_sys_adjtimex(struct compat_timex __user *utp)
                         __put_user(txc.jitcnt, &utp->jitcnt) ||
                         __put_user(txc.calcnt, &utp->calcnt) ||
                         __put_user(txc.errcnt, &utp->errcnt) ||
-                        __put_user(txc.stbcnt, &utp->stbcnt))
+                        __put_user(txc.stbcnt, &utp->stbcnt) ||
+                        __put_user(txc.tai, &utp->tai))
                 ret = -EFAULT;
 
         return ret;
diff --git a/kernel/exit.c b/kernel/exit.c
index d3ad54677f9c..1510f78a0ffa 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -19,6 +19,7 @@
 #include <linux/acct.h>
 #include <linux/tsacct_kern.h>
 #include <linux/file.h>
+#include <linux/fdtable.h>
 #include <linux/binfmts.h>
 #include <linux/nsproxy.h>
 #include <linux/pid_namespace.h>
diff --git a/kernel/fork.c b/kernel/fork.c
index 2bb675af4de3..933e60ebccae 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -22,6 +22,7 @@
 #include <linux/mempolicy.h>
 #include <linux/sem.h>
 #include <linux/file.h>
+#include <linux/fdtable.h>
 #include <linux/key.h>
 #include <linux/binfmts.h>
 #include <linux/mman.h>
diff --git a/kernel/futex.c b/kernel/futex.c
index 98092c9817f4..449def8074fe 100644
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -104,10 +104,6 @@ struct futex_q {
         /* Key which the futex is hashed on: */
         union futex_key key;
 
-        /* For fd, sigio sent using these: */
-        int fd;
-        struct file *filp;
-
         /* Optional priority inheritance state: */
         struct futex_pi_state *pi_state;
         struct task_struct *task;
@@ -126,9 +122,6 @@ struct futex_hash_bucket {
 
 static struct futex_hash_bucket futex_queues[1<<FUTEX_HASHBITS];
 
-/* Futex-fs vfsmount entry: */
-static struct vfsmount *futex_mnt;
-
 /*
  * Take mm->mmap_sem, when futex is shared
  */
@@ -610,8 +603,6 @@ lookup_pi_state(u32 uval, struct futex_hash_bucket *hb,
 static void wake_futex(struct futex_q *q)
 {
         plist_del(&q->list, &q->list.plist);
-        if (q->filp)
-                send_sigio(&q->filp->f_owner, q->fd, POLL_IN);
         /*
          * The lock in wake_up_all() is a crucial memory barrier after the
          * plist_del() and also before assigning to q->lock_ptr.
@@ -988,14 +979,10 @@ out:
 }
 
 /* The key must be already stored in q->key. */
-static inline struct futex_hash_bucket *
-queue_lock(struct futex_q *q, int fd, struct file *filp)
+static inline struct futex_hash_bucket *queue_lock(struct futex_q *q)
 {
         struct futex_hash_bucket *hb;
 
-        q->fd = fd;
-        q->filp = filp;
-
         init_waitqueue_head(&q->waiters);
 
         get_futex_key_refs(&q->key);
@@ -1006,7 +993,7 @@ queue_lock(struct futex_q *q, int fd, struct file *filp)
         return hb;
 }
 
-static inline void __queue_me(struct futex_q *q, struct futex_hash_bucket *hb)
+static inline void queue_me(struct futex_q *q, struct futex_hash_bucket *hb)
 {
         int prio;
 
@@ -1041,15 +1028,6 @@ queue_unlock(struct futex_q *q, struct futex_hash_bucket *hb)
  * exactly once.  They are called with the hashed spinlock held.
  */
 
-/* The key must be already stored in q->key. */
-static void queue_me(struct futex_q *q, int fd, struct file *filp)
-{
-        struct futex_hash_bucket *hb;
-
-        hb = queue_lock(q, fd, filp);
-        __queue_me(q, hb);
-}
-
 /* Return 1 if we were still queued (ie. 0 means we were woken) */
 static int unqueue_me(struct futex_q *q)
 {
@@ -1194,7 +1172,7 @@ static int futex_wait(u32 __user *uaddr, struct rw_semaphore *fshared,
         if (unlikely(ret != 0))
                 goto out_release_sem;
 
-        hb = queue_lock(&q, -1, NULL);
+        hb = queue_lock(&q);
 
         /*
          * Access the page AFTER the futex is queued.
@@ -1238,7 +1216,7 @@ static int futex_wait(u32 __user *uaddr, struct rw_semaphore *fshared,
                 goto out_unlock_release_sem;
 
         /* Only actually queue if *uaddr contained val.  */
-        __queue_me(&q, hb);
+        queue_me(&q, hb);
 
         /*
          * Now the futex is queued and we have checked the data, we
@@ -1386,7 +1364,7 @@ static int futex_lock_pi(u32 __user *uaddr, struct rw_semaphore *fshared,
                 goto out_release_sem;
 
  retry_unlocked:
-        hb = queue_lock(&q, -1, NULL);
+        hb = queue_lock(&q);
 
  retry_locked:
         ret = lock_taken = 0;
@@ -1499,7 +1477,7 @@ static int futex_lock_pi(u32 __user *uaddr, struct rw_semaphore *fshared,
         /*
          * Only actually queue now that the atomic ops are done:
          */
-        __queue_me(&q, hb);
+        queue_me(&q, hb);
 
         /*
          * Now the futex is queued and we have checked the data, we
@@ -1746,121 +1724,6 @@ pi_faulted:
         return ret;
 }
 
-static int futex_close(struct inode *inode, struct file *filp)
-{
-        struct futex_q *q = filp->private_data;
-
-        unqueue_me(q);
-        kfree(q);
-
-        return 0;
-}
-
-/* This is one-shot: once it's gone off you need a new fd */
-static unsigned int futex_poll(struct file *filp,
-                               struct poll_table_struct *wait)
-{
-        struct futex_q *q = filp->private_data;
-        int ret = 0;
-
-        poll_wait(filp, &q->waiters, wait);
-
-        /*
-         * plist_node_empty() is safe here without any lock.
-         * q->lock_ptr != 0 is not safe, because of ordering against wakeup.
-         */
-        if (plist_node_empty(&q->list))
-                ret = POLLIN | POLLRDNORM;
-
-        return ret;
-}
-
-static const struct file_operations futex_fops = {
-        .release        = futex_close,
-        .poll           = futex_poll,
-};
-
-/*
- * Signal allows caller to avoid the race which would occur if they
- * set the sigio stuff up afterwards.
- */
-static int futex_fd(u32 __user *uaddr, int signal)
-{
-        struct futex_q *q;
-        struct file *filp;
-        int ret, err;
-        struct rw_semaphore *fshared;
-        static unsigned long printk_interval;
-
-        if (printk_timed_ratelimit(&printk_interval, 60 * 60 * 1000)) {
-                printk(KERN_WARNING "Process `%s' used FUTEX_FD, which "
-                       "will be removed from the kernel in June 2007\n",
-                       current->comm);
-        }
-
-        ret = -EINVAL;
-        if (!valid_signal(signal))
-                goto out;
-
-        ret = get_unused_fd();
-        if (ret < 0)
-                goto out;
-        filp = get_empty_filp();
-        if (!filp) {
-                put_unused_fd(ret);
-                ret = -ENFILE;
-                goto out;
-        }
-        filp->f_op = &futex_fops;
-        filp->f_path.mnt = mntget(futex_mnt);
-        filp->f_path.dentry = dget(futex_mnt->mnt_root);
-        filp->f_mapping = filp->f_path.dentry->d_inode->i_mapping;
-
-        if (signal) {
-                err = __f_setown(filp, task_pid(current), PIDTYPE_PID, 1);
-                if (err < 0) {
-                        goto error;
-                }
-                filp->f_owner.signum = signal;
-        }
-
-        q = kmalloc(sizeof(*q), GFP_KERNEL);
-        if (!q) {
-                err = -ENOMEM;
-                goto error;
-        }
-        q->pi_state = NULL;
-
-        fshared = &current->mm->mmap_sem;
-        down_read(fshared);
-        err = get_futex_key(uaddr, fshared, &q->key);
-
-        if (unlikely(err != 0)) {
-                up_read(fshared);
-                kfree(q);
-                goto error;
-        }
-
-        /*
-         * queue_me() must be called before releasing mmap_sem, because
-         * key->shared.inode needs to be referenced while holding it.
-         */
-        filp->private_data = q;
-
-        queue_me(q, ret, filp);
-        up_read(fshared);
-
-        /* Now we map fd to filp, so userspace can access it */
-        fd_install(ret, filp);
-out:
-        return ret;
-error:
-        put_unused_fd(ret);
-        put_filp(filp);
-        ret = err;
-        goto out;
-}
-
 /*
  * Support for robust futexes: the kernel cleans up held futexes at
  * thread exit time.
@@ -2092,10 +1955,6 @@ long do_futex(u32 __user *uaddr, int op, u32 val, ktime_t *timeout,
         case FUTEX_WAKE_BITSET:
                 ret = futex_wake(uaddr, fshared, val, val3);
                 break;
-        case FUTEX_FD:
-                /* non-zero val means F_SETOWN(getpid()) & F_SETSIG(val) */
-                ret = futex_fd(uaddr, val);
-                break;
         case FUTEX_REQUEUE:
                 ret = futex_requeue(uaddr, fshared, uaddr2, val, val2, NULL);
                 break;
@@ -2156,19 +2015,6 @@ asmlinkage long sys_futex(u32 __user *uaddr, int op, u32 val,
         return do_futex(uaddr, op, val, tp, uaddr2, val2, val3);
 }
 
-static int futexfs_get_sb(struct file_system_type *fs_type,
-                          int flags, const char *dev_name, void *data,
-                          struct vfsmount *mnt)
-{
-        return get_sb_pseudo(fs_type, "futex", NULL, FUTEXFS_SUPER_MAGIC, mnt);
-}
-
-static struct file_system_type futex_fs_type = {
-        .name           = "futexfs",
-        .get_sb         = futexfs_get_sb,
-        .kill_sb        = kill_anon_super,
-};
-
 static int __init futex_init(void)
 {
         u32 curval;
@@ -2193,16 +2039,6 @@ static int __init futex_init(void)
                 spin_lock_init(&futex_queues[i].lock);
         }
 
-        i = register_filesystem(&futex_fs_type);
-        if (i)
-                return i;
-
-        futex_mnt = kern_mount(&futex_fs_type);
-        if (IS_ERR(futex_mnt)) {
-                unregister_filesystem(&futex_fs_type);
-                return PTR_ERR(futex_mnt);
-        }
-
         return 0;
 }
 __initcall(futex_init);
diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c
index 9af1d6a8095e..421be5fe5cc7 100644
--- a/kernel/hrtimer.c
+++ b/kernel/hrtimer.c
@@ -154,15 +154,6 @@ static void hrtimer_get_softirq_time(struct hrtimer_cpu_base *base)
 }
 
 /*
- * Helper function to check, whether the timer is running the callback
- * function
- */
-static inline int hrtimer_callback_running(struct hrtimer *timer)
-{
-        return timer->state & HRTIMER_STATE_CALLBACK;
-}
-
-/*
  * Functions and macros which are different for UP/SMP systems are kept in a
  * single place
  */
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index 46e4ad1723f0..46d6611a33bb 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -150,6 +150,26 @@ void disable_irq(unsigned int irq)
 }
 EXPORT_SYMBOL(disable_irq);
 
+static void __enable_irq(struct irq_desc *desc, unsigned int irq)
+{
+        switch (desc->depth) {
+        case 0:
+                printk(KERN_WARNING "Unbalanced enable for IRQ %d\n", irq);
+                WARN_ON(1);
+                break;
+        case 1: {
+                unsigned int status = desc->status & ~IRQ_DISABLED;
+
+                /* Prevent probing on this irq: */
+                desc->status = status | IRQ_NOPROBE;
+                check_irq_resend(desc, irq);
+                /* fall-through */
+        }
+        default:
+                desc->depth--;
+        }
+}
+
 /**
  *      enable_irq - enable handling of an irq
  *      @irq: Interrupt to enable
@@ -169,22 +189,7 @@ void enable_irq(unsigned int irq)
                 return;
 
         spin_lock_irqsave(&desc->lock, flags);
-        switch (desc->depth) {
-        case 0:
-                printk(KERN_WARNING "Unbalanced enable for IRQ %d\n", irq);
-                WARN_ON(1);
-                break;
-        case 1: {
-                unsigned int status = desc->status & ~IRQ_DISABLED;
-
-                /* Prevent probing on this irq: */
-                desc->status = status | IRQ_NOPROBE;
-                check_irq_resend(desc, irq);
-                /* fall-through */
-        }
-        default:
-                desc->depth--;
-        }
+        __enable_irq(desc, irq);
         spin_unlock_irqrestore(&desc->lock, flags);
 }
 EXPORT_SYMBOL(enable_irq);
@@ -365,7 +370,7 @@ int setup_irq(unsigned int irq, struct irqaction *new)
                         compat_irq_chip_set_default_handler(desc);
 
                 desc->status &= ~(IRQ_AUTODETECT | IRQ_WAITING |
-                                  IRQ_INPROGRESS);
+                                  IRQ_INPROGRESS | IRQ_SPURIOUS_DISABLED);
 
                 if (!(desc->status & IRQ_NOAUTOEN)) {
                         desc->depth = 0;
@@ -381,6 +386,16 @@ int setup_irq(unsigned int irq, struct irqaction *new)
         /* Reset broken irq detection when installing new handler */
         desc->irq_count = 0;
         desc->irqs_unhandled = 0;
+
+        /*
+         * Check whether we disabled the irq via the spurious handler
+         * before. Reenable it and give it another chance.
+         */
+        if (shared && (desc->status & IRQ_SPURIOUS_DISABLED)) {
+                desc->status &= ~IRQ_SPURIOUS_DISABLED;
+                __enable_irq(desc, irq);
+        }
+
         spin_unlock_irqrestore(&desc->lock, flags);
 
         new->irq = irq;
diff --git a/kernel/irq/spurious.c b/kernel/irq/spurious.c
index 088dabbf2d6a..c66d3f10e853 100644
--- a/kernel/irq/spurious.c
+++ b/kernel/irq/spurious.c
@@ -209,8 +209,8 @@ void note_interrupt(unsigned int irq, struct irq_desc *desc,
                  * Now kill the IRQ
                  */
                 printk(KERN_EMERG "Disabling IRQ #%d\n", irq);
-                desc->status |= IRQ_DISABLED;
-                desc->depth = 1;
+                desc->status |= IRQ_DISABLED | IRQ_SPURIOUS_DISABLED;
+                desc->depth++;
                 desc->chip->disable(irq);
         }
         desc->irqs_unhandled = 0;
diff --git a/kernel/kexec.c b/kernel/kexec.c
index cb85c79989b4..1c5fcacbcf33 100644
--- a/kernel/kexec.c
+++ b/kernel/kexec.c
@@ -1217,7 +1217,7 @@ static int __init parse_crashkernel_mem(char 			*cmdline,
                 }
 
                 /* match ? */
-                if (system_ram >= start && system_ram <= end) {
+                if (system_ram >= start && system_ram < end) {
                         *crash_size = size;
                         break;
                 }
diff --git a/kernel/kgdb.c b/kernel/kgdb.c
index 1bd0ec1c80b2..39e31a036f5b 100644
--- a/kernel/kgdb.c
+++ b/kernel/kgdb.c
@@ -61,7 +61,7 @@ struct kgdb_state {
         int                     err_code;
         int                     cpu;
         int                     pass_exception;
-        long                    threadid;
+        unsigned long           threadid;
         long                    kgdb_usethreadid;
         struct pt_regs          *linux_regs;
 };
@@ -146,7 +146,7 @@ atomic_t			kgdb_cpu_doing_single_step = ATOMIC_INIT(-1);
  * the other CPUs might interfere with your debugging context, so
  * use this with care:
  */
-int                             kgdb_do_roundup = 1;
+static int kgdb_do_roundup = 1;
 
 static int __init opt_nokgdbroundup(char *str)
 {
@@ -438,7 +438,7 @@ int kgdb_hex2mem(char *buf, char *mem, int count)
  * While we find nice hex chars, build a long_val.
  * Return number of chars processed.
  */
-int kgdb_hex2long(char **ptr, long *long_val)
+int kgdb_hex2long(char **ptr, unsigned long *long_val)
 {
         int hex_val;
         int num = 0;
@@ -709,7 +709,7 @@ int kgdb_isremovedbreak(unsigned long addr)
         return 0;
 }
 
-int remove_all_break(void)
+static int remove_all_break(void)
 {
         unsigned long addr;
         int error;
diff --git a/kernel/kmod.c b/kernel/kmod.c
index e2764047ec03..8df97d3dfda8 100644
--- a/kernel/kmod.c
+++ b/kernel/kmod.c
@@ -27,6 +27,7 @@
 #include <linux/mnt_namespace.h>
 #include <linux/completion.h>
 #include <linux/file.h>
+#include <linux/fdtable.h>
 #include <linux/workqueue.h>
 #include <linux/security.h>
 #include <linux/mount.h>
diff --git a/kernel/module.c b/kernel/module.c
index 8d6cccc6c3cf..8e4528c9909f 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -164,131 +164,140 @@ static const struct kernel_symbol *lookup_symbol(const char *name,
         return NULL;
 }
 
-static void printk_unused_warning(const char *name)
+static bool always_ok(bool gplok, bool warn, const char *name)
 {
-        printk(KERN_WARNING "Symbol %s is marked as UNUSED, "
-                "however this module is using it.\n", name);
-        printk(KERN_WARNING "This symbol will go away in the future.\n");
-        printk(KERN_WARNING "Please evalute if this is the right api to use, "
-                "and if it really is, submit a report the linux kernel "
-                "mailinglist together with submitting your code for "
-                "inclusion.\n");
+        return true;
 }
 
-/* Find a symbol, return value, crc and module which owns it */
-static unsigned long __find_symbol(const char *name,
-                                   struct module **owner,
-                                   const unsigned long **crc,
-                                   int gplok)
+static bool printk_unused_warning(bool gplok, bool warn, const char *name)
 {
-        struct module *mod;
-        const struct kernel_symbol *ks;
-
-        /* Core kernel first. */
-        *owner = NULL;
-        ks = lookup_symbol(name, __start___ksymtab, __stop___ksymtab);
-        if (ks) {
-                *crc = symversion(__start___kcrctab, (ks - __start___ksymtab));
-                return ks->value;
-        }
-        if (gplok) {
-                ks = lookup_symbol(name, __start___ksymtab_gpl,
-                                         __stop___ksymtab_gpl);
-                if (ks) {
-                        *crc = symversion(__start___kcrctab_gpl,
-                                          (ks - __start___ksymtab_gpl));
-                        return ks->value;
-                }
+        if (warn) {
+                printk(KERN_WARNING "Symbol %s is marked as UNUSED, "
+                       "however this module is using it.\n", name);
+                printk(KERN_WARNING
+                       "This symbol will go away in the future.\n");
+                printk(KERN_WARNING
+                       "Please evalute if this is the right api to use and if "
+                       "it really is, submit a report the linux kernel "
+                       "mailinglist together with submitting your code for "
+                       "inclusion.\n");
         }
-        ks = lookup_symbol(name, __start___ksymtab_gpl_future,
-                                 __stop___ksymtab_gpl_future);
-        if (ks) {
-                if (!gplok) {
-                        printk(KERN_WARNING "Symbol %s is being used "
-                               "by a non-GPL module, which will not "
-                               "be allowed in the future\n", name);
-                        printk(KERN_WARNING "Please see the file "
-                               "Documentation/feature-removal-schedule.txt "
-                               "in the kernel source tree for more "
-                               "details.\n");
-                }
-                *crc = symversion(__start___kcrctab_gpl_future,
-                                  (ks - __start___ksymtab_gpl_future));
-                return ks->value;
+        return true;
+}
+
+static bool gpl_only_unused_warning(bool gplok, bool warn, const char *name)
+{
+        if (!gplok)
+                return false;
+        return printk_unused_warning(gplok, warn, name);
+}
+
+static bool gpl_only(bool gplok, bool warn, const char *name)
+{
+        return gplok;
+}
+
+static bool warn_if_not_gpl(bool gplok, bool warn, const char *name)
+{
+        if (!gplok && warn) {
+                printk(KERN_WARNING "Symbol %s is being used "
+                       "by a non-GPL module, which will not "
+                       "be allowed in the future\n", name);
+                printk(KERN_WARNING "Please see the file "
+                       "Documentation/feature-removal-schedule.txt "
+                       "in the kernel source tree for more details.\n");
         }
+        return true;
+}
 
-        ks = lookup_symbol(name, __start___ksymtab_unused,
-                                 __stop___ksymtab_unused);
-        if (ks) {
-                printk_unused_warning(name);
-                *crc = symversion(__start___kcrctab_unused,
-                                  (ks - __start___ksymtab_unused));
-                return ks->value;
+struct symsearch {
+        const struct kernel_symbol *start, *stop;
+        const unsigned long *crcs;
+        bool (*check)(bool gplok, bool warn, const char *name);
+};
+
+/* Look through this array of symbol tables for a symbol match which
+ * passes the check function. */
+static const struct kernel_symbol *search_symarrays(const struct symsearch *arr,
+                                                    unsigned int num,
+                                                    const char *name,
+                                                    bool gplok,
+                                                    bool warn,
+                                                    const unsigned long **crc)
+{
+        unsigned int i;
+        const struct kernel_symbol *ks;
+
+        for (i = 0; i < num; i++) {
+                ks = lookup_symbol(name, arr[i].start, arr[i].stop);
+                if (!ks || !arr[i].check(gplok, warn, name))
+                        continue;
+
+                if (crc)
+                        *crc = symversion(arr[i].crcs, ks - arr[i].start);
+                return ks;
         }
+        return NULL;
+}
 
-        if (gplok)
-                ks = lookup_symbol(name, __start___ksymtab_unused_gpl,
-                                 __stop___ksymtab_unused_gpl);
+/* Find a symbol, return value, (optional) crc and (optional) module
+ * which owns it */
+static unsigned long find_symbol(const char *name,
+                                 struct module **owner,
+                                 const unsigned long **crc,
+                                 bool gplok,
+                                 bool warn)
+{
+        struct module *mod;
+        const struct kernel_symbol *ks;
+        const struct symsearch arr[] = {
+                { __start___ksymtab, __stop___ksymtab, __start___kcrctab,
+                  always_ok },
+                { __start___ksymtab_gpl, __stop___ksymtab_gpl,
+                  __start___kcrctab_gpl, gpl_only },
+                { __start___ksymtab_gpl_future, __stop___ksymtab_gpl_future,
+                  __start___kcrctab_gpl_future, warn_if_not_gpl },
+                { __start___ksymtab_unused, __stop___ksymtab_unused,
+                  __start___kcrctab_unused, printk_unused_warning },
+                { __start___ksymtab_unused_gpl, __stop___ksymtab_unused_gpl,
+                  __start___kcrctab_unused_gpl, gpl_only_unused_warning },
+        };
+
+        /* Core kernel first. */
+        ks = search_symarrays(arr, ARRAY_SIZE(arr), name, gplok, warn, crc);
         if (ks) {
-                printk_unused_warning(name);
-                *crc = symversion(__start___kcrctab_unused_gpl,
-                                  (ks - __start___ksymtab_unused_gpl));
+                if (owner)
+                        *owner = NULL;
                 return ks->value;
         }
 
         /* Now try modules. */
         list_for_each_entry(mod, &modules, list) {
-                *owner = mod;
-                ks = lookup_symbol(name, mod->syms, mod->syms + mod->num_syms);
+                struct symsearch arr[] = {
+                        { mod->syms, mod->syms + mod->num_syms, mod->crcs,
+                          always_ok },
+                        { mod->gpl_syms, mod->gpl_syms + mod->num_gpl_syms,
+                          mod->gpl_crcs, gpl_only },
+                        { mod->gpl_future_syms,
+                          mod->gpl_future_syms + mod->num_gpl_future_syms,
+                          mod->gpl_future_crcs, warn_if_not_gpl },
+                        { mod->unused_syms,
+                          mod->unused_syms + mod->num_unused_syms,
+                          mod->unused_crcs, printk_unused_warning },
+                        { mod->unused_gpl_syms,
+                          mod->unused_gpl_syms + mod->num_unused_gpl_syms,
+                          mod->unused_gpl_crcs, gpl_only_unused_warning },
+                };
+
+                ks = search_symarrays(arr, ARRAY_SIZE(arr),
+                                      name, gplok, warn, crc);
                 if (ks) {
-                        *crc = symversion(mod->crcs, (ks - mod->syms));
-                        return ks->value;
-                }
-
-                if (gplok) {
-                        ks = lookup_symbol(name, mod->gpl_syms,
-                                           mod->gpl_syms + mod->num_gpl_syms);
-                        if (ks) {
-                                *crc = symversion(mod->gpl_crcs,
-                                                  (ks - mod->gpl_syms));
-                                return ks->value;
-                        }
-                }
-                ks = lookup_symbol(name, mod->unused_syms, mod->unused_syms + mod->num_unused_syms);
-                if (ks) {
-                        printk_unused_warning(name);
-                        *crc = symversion(mod->unused_crcs, (ks - mod->unused_syms));
-                        return ks->value;
-                }
-
-                if (gplok) {
-                        ks = lookup_symbol(name, mod->unused_gpl_syms,
-                                           mod->unused_gpl_syms + mod->num_unused_gpl_syms);
-                        if (ks) {
-                                printk_unused_warning(name);
-                                *crc = symversion(mod->unused_gpl_crcs,
-                                                  (ks - mod->unused_gpl_syms));
-                                return ks->value;
-                        }
-                }
-                ks = lookup_symbol(name, mod->gpl_future_syms,
-                                   (mod->gpl_future_syms +
-                                    mod->num_gpl_future_syms));
-                if (ks) {
-                        if (!gplok) {
-                                printk(KERN_WARNING "Symbol %s is being used "
-                                       "by a non-GPL module, which will not "
-                                       "be allowed in the future\n", name);
-                                printk(KERN_WARNING "Please see the file "
-                                       "Documentation/feature-removal-schedule.txt "
-                                       "in the kernel source tree for more "
-                                       "details.\n");
-                        }
-                        *crc = symversion(mod->gpl_future_crcs,
-                                          (ks - mod->gpl_future_syms));
+                        if (owner)
+                                *owner = mod;
                         return ks->value;
                 }
         }
+
         DEBUGP("Failed to find symbol %s\n", name);
         return -ENOENT;
 }
@@ -736,12 +745,13 @@ sys_delete_module(const char __user *name_user, unsigned int flags)
         if (!forced && module_refcount(mod) != 0)
                 wait_for_zero_refcount(mod);
 
+        mutex_unlock(&module_mutex);
         /* Final destruction now noone is using it. */
-        if (mod->exit != NULL) {
-                mutex_unlock(&module_mutex);
+        if (mod->exit != NULL)
                 mod->exit();
-                mutex_lock(&module_mutex);
-        }
+        blocking_notifier_call_chain(&module_notify_list,
+                                     MODULE_STATE_GOING, mod);
+        mutex_lock(&module_mutex);
         /* Store the name of the last unloaded module for diagnostic purposes */
         strlcpy(last_unloaded_module, mod->name, sizeof(last_unloaded_module));
         free_module(mod);
@@ -777,10 +787,9 @@ static void print_unload_info(struct seq_file *m, struct module *mod)
 void __symbol_put(const char *symbol)
 {
         struct module *owner;
-        const unsigned long *crc;
 
         preempt_disable();
-        if (IS_ERR_VALUE(__find_symbol(symbol, &owner, &crc, 1)))
+        if (IS_ERR_VALUE(find_symbol(symbol, &owner, NULL, true, false)))
                 BUG();
         module_put(owner);
         preempt_enable();
@@ -881,6 +890,19 @@ static struct module_attribute *modinfo_attrs[] = {
 
 static const char vermagic[] = VERMAGIC_STRING;
 
+static int try_to_force_load(struct module *mod, const char *symname)
+{
+#ifdef CONFIG_MODULE_FORCE_LOAD
+        if (!(tainted & TAINT_FORCED_MODULE))
+                printk("%s: no version for \"%s\" found: kernel tainted.\n",
+                       mod->name, symname);
+        add_taint_module(mod, TAINT_FORCED_MODULE);
+        return 0;
+#else
+        return -ENOEXEC;
+#endif
+}
+
 #ifdef CONFIG_MODVERSIONS
 static int check_version(Elf_Shdr *sechdrs,
                          unsigned int versindex,
@@ -905,18 +927,18 @@ static int check_version(Elf_Shdr *sechdrs,
 
                 if (versions[i].crc == *crc)
                         return 1;
-                printk("%s: disagrees about version of symbol %s\n",
-                       mod->name, symname);
                 DEBUGP("Found checksum %lX vs module %lX\n",
                        *crc, versions[i].crc);
-                return 0;
+                goto bad_version;
         }
-        /* Not in module's version table.  OK, but that taints the kernel. */
-        if (!(tainted & TAINT_FORCED_MODULE))
-                printk("%s: no version for \"%s\" found: kernel tainted.\n",
-                       mod->name, symname);
-        add_taint_module(mod, TAINT_FORCED_MODULE);
-        return 1;
+
+        if (!try_to_force_load(mod, symname))
+                return 1;
+
+bad_version:
+        printk("%s: disagrees about version of symbol %s\n",
+               mod->name, symname);
+        return 0;
 }
 
 static inline int check_modstruct_version(Elf_Shdr *sechdrs,
@@ -924,13 +946,10 @@ static inline int check_modstruct_version(Elf_Shdr *sechdrs,
                                           struct module *mod)
 {
         const unsigned long *crc;
-        struct module *owner;
 
-        if (IS_ERR_VALUE(__find_symbol("struct_module",
-                                                &owner, &crc, 1)))
+        if (IS_ERR_VALUE(find_symbol("struct_module", NULL, &crc, true, false)))
                 BUG();
-        return check_version(sechdrs, versindex, "struct_module", mod,
-                             crc);
+        return check_version(sechdrs, versindex, "struct_module", mod, crc);
 }
 
 /* First part is kernel version, which we ignore. */
@@ -974,8 +993,8 @@ static unsigned long resolve_symbol(Elf_Shdr *sechdrs,
         unsigned long ret;
         const unsigned long *crc;
 
-        ret = __find_symbol(name, &owner, &crc,
-                        !(mod->taints & TAINT_PROPRIETARY_MODULE));
+        ret = find_symbol(name, &owner, &crc,
+                          !(mod->taints & TAINT_PROPRIETARY_MODULE), true);
         if (!IS_ERR_VALUE(ret)) {
                 /* use_module can fail due to OOM,
                    or module initialization or unloading */
@@ -991,6 +1010,20 @@ static unsigned long resolve_symbol(Elf_Shdr *sechdrs,
  * J. Corbet <corbet@lwn.net>
  */
 #if defined(CONFIG_KALLSYMS) && defined(CONFIG_SYSFS)
+struct module_sect_attr
+{
+        struct module_attribute mattr;
+        char *name;
+        unsigned long address;
+};
+
+struct module_sect_attrs
+{
+        struct attribute_group grp;
+        unsigned int nsections;
+        struct module_sect_attr attrs[0];
+};
+
 static ssize_t module_sect_show(struct module_attribute *mattr,
                                 struct module *mod, char *buf)
 {
@@ -1001,7 +1034,7 @@ static ssize_t module_sect_show(struct module_attribute *mattr,
 
 static void free_sect_attrs(struct module_sect_attrs *sect_attrs)
 {
-        int section;
+        unsigned int section;
 
         for (section = 0; section < sect_attrs->nsections; section++)
                 kfree(sect_attrs->attrs[section].name);
@@ -1362,10 +1395,9 @@ void *__symbol_get(const char *symbol)
 {
         struct module *owner;
         unsigned long value;
-        const unsigned long *crc;
 
         preempt_disable();
-        value = __find_symbol(symbol, &owner, &crc, 1);
+        value = find_symbol(symbol, &owner, NULL, true, true);
         if (IS_ERR_VALUE(value))
                 value = 0;
         else if (strong_try_module_get(owner))
@@ -1382,33 +1414,33 @@ EXPORT_SYMBOL_GPL(__symbol_get);
  */
 static int verify_export_symbols(struct module *mod)
 {
-        const char *name = NULL;
-        unsigned long i, ret = 0;
+        unsigned int i;
         struct module *owner;
-        const unsigned long *crc;
-
-        for (i = 0; i < mod->num_syms; i++)
-                if (!IS_ERR_VALUE(__find_symbol(mod->syms[i].name,
-                                                        &owner, &crc, 1))) {
-                        name = mod->syms[i].name;
-                        ret = -ENOEXEC;
-                        goto dup;
-                }
+        const struct kernel_symbol *s;
+        struct {
+                const struct kernel_symbol *sym;
+                unsigned int num;
+        } arr[] = {
+                { mod->syms, mod->num_syms },
+                { mod->gpl_syms, mod->num_gpl_syms },
+                { mod->gpl_future_syms, mod->num_gpl_future_syms },
+                { mod->unused_syms, mod->num_unused_syms },
+                { mod->unused_gpl_syms, mod->num_unused_gpl_syms },
+        };
 
-        for (i = 0; i < mod->num_gpl_syms; i++)
-                if (!IS_ERR_VALUE(__find_symbol(mod->gpl_syms[i].name,
-                                                        &owner, &crc, 1))) {
-                        name = mod->gpl_syms[i].name;
-                        ret = -ENOEXEC;
-                        goto dup;
+        for (i = 0; i < ARRAY_SIZE(arr); i++) {
+                for (s = arr[i].sym; s < arr[i].sym + arr[i].num; s++) {
+                        if (!IS_ERR_VALUE(find_symbol(s->name, &owner,
+                                                      NULL, true, false))) {
+                                printk(KERN_ERR
+                                       "%s: exports duplicate symbol %s"
+                                       " (owned by %s)\n",
+                                       mod->name, s->name, module_name(owner));
+                                return -ENOEXEC;
+                        }
                 }
-
-dup:
-        if (ret)
-                printk(KERN_ERR "%s: exports duplicate symbol %s (owned by %s)\n",
-                        mod->name, name, module_name(owner));
-
-        return ret;
+        }
+        return 0;
 }
 
 /* Change all symbols so that st_value encodes the pointer directly. */
@@ -1814,8 +1846,9 @@ static struct module *load_module(void __user *umod,
         unwindex = find_sec(hdr, sechdrs, secstrings, ARCH_UNWIND_SECTION_NAME);
 #endif
 
-        /* Don't keep modinfo section */
+        /* Don't keep modinfo and version sections. */
         sechdrs[infoindex].sh_flags &= ~(unsigned long)SHF_ALLOC;
+        sechdrs[versindex].sh_flags &= ~(unsigned long)SHF_ALLOC;
 #ifdef CONFIG_KALLSYMS
         /* Keep symbol and string tables for decoding later. */
         sechdrs[symindex].sh_flags |= SHF_ALLOC;
@@ -1833,9 +1866,9 @@ static struct module *load_module(void __user *umod,
         modmagic = get_modinfo(sechdrs, infoindex, "vermagic");
         /* This is allowed: modprobe --force will invalidate it. */
         if (!modmagic) {
-                add_taint_module(mod, TAINT_FORCED_MODULE);
-                printk(KERN_WARNING "%s: no version magic, tainting kernel.\n",
-                       mod->name);
+                err = try_to_force_load(mod, "magic");
+                if (err)
+                        goto free_hdr;
         } else if (!same_magic(modmagic, vermagic)) {
                 printk(KERN_ERR "%s: version magic '%s' should be '%s'\n",
                        mod->name, modmagic, vermagic);
@@ -1977,7 +2010,8 @@ static struct module *load_module(void __user *umod,
                 mod->unused_crcs = (void *)sechdrs[unusedcrcindex].sh_addr;
         mod->unused_gpl_syms = (void *)sechdrs[unusedgplindex].sh_addr;
         if (unusedgplcrcindex)
-                mod->unused_crcs = (void *)sechdrs[unusedgplcrcindex].sh_addr;
+                mod->unused_gpl_crcs
+                        = (void *)sechdrs[unusedgplcrcindex].sh_addr;
 
 #ifdef CONFIG_MODVERSIONS
         if ((mod->num_syms && !crcindex) ||
@@ -1985,9 +2019,10 @@ static struct module *load_module(void __user *umod,
             (mod->num_gpl_future_syms && !gplfuturecrcindex) ||
             (mod->num_unused_syms && !unusedcrcindex) ||
             (mod->num_unused_gpl_syms && !unusedgplcrcindex)) {
-                printk(KERN_WARNING "%s: No versions for exported symbols."
-                       " Tainting kernel.\n", mod->name);
-                add_taint_module(mod, TAINT_FORCED_MODULE);
+                printk(KERN_WARNING "%s: No versions for exported symbols.\n", mod->name);
+                err = try_to_force_load(mod, "nocrc");
+                if (err)
+                        goto cleanup;
         }
 #endif
         markersindex = find_sec(hdr, sechdrs, secstrings, "__markers");
@@ -2171,6 +2206,8 @@ sys_init_module(void __user *umod,
                 mod->state = MODULE_STATE_GOING;
                 synchronize_sched();
                 module_put(mod);
+                blocking_notifier_call_chain(&module_notify_list,
+                                             MODULE_STATE_GOING, mod);
                 mutex_lock(&module_mutex);
                 free_module(mod);
                 mutex_unlock(&module_mutex);
diff --git a/kernel/posix-cpu-timers.c b/kernel/posix-cpu-timers.c
index ae5c6c147c4b..f1525ad06cb3 100644
--- a/kernel/posix-cpu-timers.c
+++ b/kernel/posix-cpu-timers.c
@@ -4,8 +4,9 @@
 
 #include <linux/sched.h>
 #include <linux/posix-timers.h>
-#include <asm/uaccess.h>
 #include <linux/errno.h>
+#include <linux/math64.h>
+#include <asm/uaccess.h>
 
 static int check_clock(const clockid_t which_clock)
 {
@@ -47,12 +48,10 @@ static void sample_to_timespec(const clockid_t which_clock,
                                union cpu_time_count cpu,
                                struct timespec *tp)
 {
-        if (CPUCLOCK_WHICH(which_clock) == CPUCLOCK_SCHED) {
-                tp->tv_sec = div_long_long_rem(cpu.sched,
-                                               NSEC_PER_SEC, &tp->tv_nsec);
-        } else {
+        if (CPUCLOCK_WHICH(which_clock) == CPUCLOCK_SCHED)
+                *tp = ns_to_timespec(cpu.sched);
+        else
                 cputime_to_timespec(cpu.cpu, tp);
-        }
 }
 
 static inline int cpu_time_before(const clockid_t which_clock,
diff --git a/kernel/ptrace.c b/kernel/ptrace.c
index dcc199c43a12..6c19e94fd0a5 100644
--- a/kernel/ptrace.c
+++ b/kernel/ptrace.c
@@ -534,7 +534,6 @@ struct task_struct *ptrace_get_task_struct(pid_t pid)
 #define arch_ptrace_attach(child)       do { } while (0)
 #endif
 
-#ifndef __ARCH_SYS_PTRACE
 asmlinkage long sys_ptrace(long request, long pid, long addr, long data)
 {
         struct task_struct *child;
@@ -582,7 +581,6 @@ asmlinkage long sys_ptrace(long request, long pid, long addr, long data)
         unlock_kernel();
         return ret;
 }
-#endif /* __ARCH_SYS_PTRACE */
 
 int generic_ptrace_peekdata(struct task_struct *tsk, long addr, long data)
 {
diff --git a/kernel/sched.c b/kernel/sched.c
index e2f7f5acc807..58fb8af15776 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -75,16 +75,6 @@
 #include <asm/irq_regs.h>
 
 /*
- * Scheduler clock - returns current time in nanosec units.
- * This is default implementation.
- * Architectures and sub-architectures can override this.
- */
-unsigned long long __attribute__((weak)) sched_clock(void)
-{
-        return (unsigned long long)jiffies * (NSEC_PER_SEC / HZ);
-}
-
-/*
  * Convert user-nice values [ -20 ... 0 ... 19 ]
  * to static priority [ MAX_RT_PRIO..MAX_PRIO-1 ],
  * and back.
@@ -242,6 +232,12 @@ static void destroy_rt_bandwidth(struct rt_bandwidth *rt_b)
 }
 #endif
 
+/*
+ * sched_domains_mutex serializes calls to arch_init_sched_domains,
+ * detach_destroy_domains and partition_sched_domains.
+ */
+static DEFINE_MUTEX(sched_domains_mutex);
+
 #ifdef CONFIG_GROUP_SCHED
 
 #include <linux/cgroup.h>
@@ -308,9 +304,6 @@ static DEFINE_PER_CPU(struct rt_rq, init_rt_rq) ____cacheline_aligned_in_smp;
  */
 static DEFINE_SPINLOCK(task_group_lock);
 
-/* doms_cur_mutex serializes access to doms_cur[] array */
-static DEFINE_MUTEX(doms_cur_mutex);
-
 #ifdef CONFIG_FAIR_GROUP_SCHED
 #ifdef CONFIG_USER_SCHED
 # define INIT_TASK_GROUP_LOAD   (2*NICE_0_LOAD)
@@ -318,7 +311,13 @@ static DEFINE_MUTEX(doms_cur_mutex);
 # define INIT_TASK_GROUP_LOAD   NICE_0_LOAD
 #endif
 
+/*
+ * A weight of 0, 1 or ULONG_MAX can cause arithmetics problems.
+ * (The default weight is 1024 - so there's no practical
+ *  limitation from this.)
+ */
 #define MIN_SHARES      2
+#define MAX_SHARES      (ULONG_MAX - 1)
 
 static int init_task_group_load = INIT_TASK_GROUP_LOAD;
 #endif
@@ -358,21 +357,9 @@ static inline void set_task_rq(struct task_struct *p, unsigned int cpu)
 #endif
 }
 
-static inline void lock_doms_cur(void)
-{
-        mutex_lock(&doms_cur_mutex);
-}
-
-static inline void unlock_doms_cur(void)
-{
-        mutex_unlock(&doms_cur_mutex);
-}
-
 #else
 
 static inline void set_task_rq(struct task_struct *p, unsigned int cpu) { }
-static inline void lock_doms_cur(void) { }
-static inline void unlock_doms_cur(void) { }
 
 #endif  /* CONFIG_GROUP_SCHED */
 
@@ -560,13 +547,7 @@ struct rq {
         unsigned long next_balance;
         struct mm_struct *prev_mm;
 
-        u64 clock, prev_clock_raw;
-        s64 clock_max_delta;
-
-        unsigned int clock_warps, clock_overflows, clock_underflows;
-        u64 idle_clock;
-        unsigned int clock_deep_idle_events;
-        u64 tick_timestamp;
+        u64 clock;
 
         atomic_t nr_iowait;
 
@@ -631,82 +612,6 @@ static inline int cpu_of(struct rq *rq)
 #endif
 }
 
-#ifdef CONFIG_NO_HZ
-static inline bool nohz_on(int cpu)
-{
-        return tick_get_tick_sched(cpu)->nohz_mode != NOHZ_MODE_INACTIVE;
-}
-
-static inline u64 max_skipped_ticks(struct rq *rq)
-{
-        return nohz_on(cpu_of(rq)) ? jiffies - rq->last_tick_seen + 2 : 1;
-}
-
-static inline void update_last_tick_seen(struct rq *rq)
-{
-        rq->last_tick_seen = jiffies;
-}
-#else
-static inline u64 max_skipped_ticks(struct rq *rq)
-{
-        return 1;
-}
-
-static inline void update_last_tick_seen(struct rq *rq)
-{
-}
-#endif
-
-/*
- * Update the per-runqueue clock, as finegrained as the platform can give
- * us, but without assuming monotonicity, etc.:
- */
-static void __update_rq_clock(struct rq *rq)
-{
-        u64 prev_raw = rq->prev_clock_raw;
-        u64 now = sched_clock();
-        s64 delta = now - prev_raw;
-        u64 clock = rq->clock;
-
-#ifdef CONFIG_SCHED_DEBUG
-        WARN_ON_ONCE(cpu_of(rq) != smp_processor_id());
-#endif
-        /*
-         * Protect against sched_clock() occasionally going backwards:
-         */
-        if (unlikely(delta < 0)) {
-                clock++;
-                rq->clock_warps++;
-        } else {
-                /*
-                 * Catch too large forward jumps too:
-                 */
-                u64 max_jump = max_skipped_ticks(rq) * TICK_NSEC;
-                u64 max_time = rq->tick_timestamp + max_jump;
-
-                if (unlikely(clock + delta > max_time)) {
-                        if (clock < max_time)
-                                clock = max_time;
-                        else
-                                clock++;
-                        rq->clock_overflows++;
-                } else {
-                        if (unlikely(delta > rq->clock_max_delta))
-                                rq->clock_max_delta = delta;
-                        clock += delta;
-                }
-        }
-
-        rq->prev_clock_raw = now;
-        rq->clock = clock;
-}
-
-static void update_rq_clock(struct rq *rq)
-{
-        if (likely(smp_processor_id() == cpu_of(rq)))
-                __update_rq_clock(rq);
-}
-
 /*
  * The domain tree (rq->sd) is protected by RCU's quiescent state transition.
  * See detach_destroy_domains: synchronize_sched for details.
@@ -722,6 +627,11 @@ static void update_rq_clock(struct rq *rq)
 #define task_rq(p)              cpu_rq(task_cpu(p))
 #define cpu_curr(cpu)           (cpu_rq(cpu)->curr)
 
+static inline void update_rq_clock(struct rq *rq)
+{
+        rq->clock = sched_clock_cpu(cpu_of(rq));
+}
+
 /*
  * Tunables that become constants when CONFIG_SCHED_DEBUG is off:
  */
@@ -757,14 +667,14 @@ const_debug unsigned int sysctl_sched_features =
 #define SCHED_FEAT(name, enabled)       \
         #name ,
 
-__read_mostly char *sched_feat_names[] = {
+static __read_mostly char *sched_feat_names[] = {
 #include "sched_features.h"
         NULL
 };
 
 #undef SCHED_FEAT
 
-int sched_feat_open(struct inode *inode, struct file *filp)
+static int sched_feat_open(struct inode *inode, struct file *filp)
 {
         filp->private_data = inode->i_private;
         return 0;
@@ -899,7 +809,7 @@ static inline u64 global_rt_runtime(void)
         return (u64)sysctl_sched_rt_runtime * NSEC_PER_USEC;
 }
 
-static const unsigned long long time_sync_thresh = 100000;
+unsigned long long time_sync_thresh = 100000;
 
 static DEFINE_PER_CPU(unsigned long long, time_offset);
 static DEFINE_PER_CPU(unsigned long long, prev_cpu_time);
@@ -913,11 +823,14 @@ static DEFINE_PER_CPU(unsigned long long, prev_cpu_time);
 static DEFINE_SPINLOCK(time_sync_lock);
 static unsigned long long prev_global_time;
 
-static unsigned long long __sync_cpu_clock(cycles_t time, int cpu)
+static unsigned long long __sync_cpu_clock(unsigned long long time, int cpu)
 {
-        unsigned long flags;
-
-        spin_lock_irqsave(&time_sync_lock, flags);
+        /*
+         * We want this inlined, to not get tracer function calls
+         * in this critical section:
+         */
+        spin_acquire(&time_sync_lock.dep_map, 0, 0, _THIS_IP_);
+        __raw_spin_lock(&time_sync_lock.raw_lock);
 
         if (time < prev_global_time) {
                 per_cpu(time_offset, cpu) += prev_global_time - time;
@@ -926,7 +839,8 @@ static unsigned long long __sync_cpu_clock(cycles_t time, int cpu)
                 prev_global_time = time;
         }
 
-        spin_unlock_irqrestore(&time_sync_lock, flags);
+        __raw_spin_unlock(&time_sync_lock.raw_lock);
+        spin_release(&time_sync_lock.dep_map, 1, _THIS_IP_);
 
         return time;
 }
@@ -934,8 +848,6 @@ static unsigned long long __sync_cpu_clock(cycles_t time, int cpu)
 static unsigned long long __cpu_clock(int cpu)
 {
         unsigned long long now;
-        unsigned long flags;
-        struct rq *rq;
 
         /*
          * Only call sched_clock() if the scheduler has already been
@@ -944,11 +856,7 @@ static unsigned long long __cpu_clock(int cpu)
         if (unlikely(!scheduler_running))
                 return 0;
 
-        local_irq_save(flags);
-        rq = cpu_rq(cpu);
-        update_rq_clock(rq);
-        now = rq->clock;
-        local_irq_restore(flags);
+        now = sched_clock_cpu(cpu);
 
         return now;
 }
@@ -960,13 +868,18 @@ static unsigned long long __cpu_clock(int cpu)
 unsigned long long cpu_clock(int cpu)
 {
         unsigned long long prev_cpu_time, time, delta_time;
+        unsigned long flags;
 
+        local_irq_save(flags);
         prev_cpu_time = per_cpu(prev_cpu_time, cpu);
         time = __cpu_clock(cpu) + per_cpu(time_offset, cpu);
         delta_time = time-prev_cpu_time;
 
-        if (unlikely(delta_time > time_sync_thresh))
+        if (unlikely(delta_time > time_sync_thresh)) {
                 time = __sync_cpu_clock(time, cpu);
+                per_cpu(prev_cpu_time, cpu) = time;
+        }
+        local_irq_restore(flags);
 
         return time;
 }
@@ -1117,43 +1030,6 @@ static struct rq *this_rq_lock(void)
         return rq;
 }
 
-/*
- * We are going deep-idle (irqs are disabled):
- */
-void sched_clock_idle_sleep_event(void)
-{
-        struct rq *rq = cpu_rq(smp_processor_id());
-
-        spin_lock(&rq->lock);
-        __update_rq_clock(rq);
-        spin_unlock(&rq->lock);
-        rq->clock_deep_idle_events++;
-}
-EXPORT_SYMBOL_GPL(sched_clock_idle_sleep_event);
-
-/*
- * We just idled delta nanoseconds (called with irqs disabled):
- */
-void sched_clock_idle_wakeup_event(u64 delta_ns)
-{
-        struct rq *rq = cpu_rq(smp_processor_id());
-        u64 now = sched_clock();
-
-        rq->idle_clock += delta_ns;
-        /*
-         * Override the previous timestamp and ignore all
-         * sched_clock() deltas that occured while we idled,
-         * and use the PM-provided delta_ns to advance the
-         * rq clock:
-         */
-        spin_lock(&rq->lock);
-        rq->prev_clock_raw = now;
-        rq->clock += delta_ns;
-        spin_unlock(&rq->lock);
-        touch_softlockup_watchdog();
-}
-EXPORT_SYMBOL_GPL(sched_clock_idle_wakeup_event);
-
 static void __resched_task(struct task_struct *p, int tif_bit);
 
 static inline void resched_task(struct task_struct *p)
@@ -1189,6 +1065,7 @@ static inline void resched_rq(struct rq *rq)
 enum {
         HRTICK_SET,             /* re-programm hrtick_timer */
         HRTICK_RESET,           /* not a new slice */
+        HRTICK_BLOCK,           /* stop hrtick operations */
 };
 
 /*
@@ -1200,6 +1077,8 @@ static inline int hrtick_enabled(struct rq *rq)
 {
         if (!sched_feat(HRTICK))
                 return 0;
+        if (unlikely(test_bit(HRTICK_BLOCK, &rq->hrtick_flags)))
+                return 0;
         return hrtimer_is_hres_active(&rq->hrtick_timer);
 }
 
@@ -1275,14 +1154,70 @@ static enum hrtimer_restart hrtick(struct hrtimer *timer)
         WARN_ON_ONCE(cpu_of(rq) != smp_processor_id());
 
         spin_lock(&rq->lock);
-        __update_rq_clock(rq);
+        update_rq_clock(rq);
         rq->curr->sched_class->task_tick(rq, rq->curr, 1);
         spin_unlock(&rq->lock);
 
         return HRTIMER_NORESTART;
 }
 
-static inline void init_rq_hrtick(struct rq *rq)
+static void hotplug_hrtick_disable(int cpu)
+{
+        struct rq *rq = cpu_rq(cpu);
+        unsigned long flags;
+
+        spin_lock_irqsave(&rq->lock, flags);
+        rq->hrtick_flags = 0;
+        __set_bit(HRTICK_BLOCK, &rq->hrtick_flags);
+        spin_unlock_irqrestore(&rq->lock, flags);
+
+        hrtick_clear(rq);
+}
+
+static void hotplug_hrtick_enable(int cpu)
+{
+        struct rq *rq = cpu_rq(cpu);
+        unsigned long flags;
+
+        spin_lock_irqsave(&rq->lock, flags);
+        __clear_bit(HRTICK_BLOCK, &rq->hrtick_flags);
+        spin_unlock_irqrestore(&rq->lock, flags);
+}
+
+static int
+hotplug_hrtick(struct notifier_block *nfb, unsigned long action, void *hcpu)
+{
+        int cpu = (int)(long)hcpu;
+
+        switch (action) {
+        case CPU_UP_CANCELED:
+        case CPU_UP_CANCELED_FROZEN:
+        case CPU_DOWN_PREPARE:
+        case CPU_DOWN_PREPARE_FROZEN:
+        case CPU_DEAD:
+        case CPU_DEAD_FROZEN:
+                hotplug_hrtick_disable(cpu);
+                return NOTIFY_OK;
+
+        case CPU_UP_PREPARE:
+        case CPU_UP_PREPARE_FROZEN:
+        case CPU_DOWN_FAILED:
+        case CPU_DOWN_FAILED_FROZEN:
+        case CPU_ONLINE:
+        case CPU_ONLINE_FROZEN:
+                hotplug_hrtick_enable(cpu);
+                return NOTIFY_OK;
+        }
+
+        return NOTIFY_DONE;
+}
+
+static void init_hrtick(void)
+{
+        hotcpu_notifier(hotplug_hrtick, 0);
+}
+
+static void init_rq_hrtick(struct rq *rq)
 {
         rq->hrtick_flags = 0;
         hrtimer_init(&rq->hrtick_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
@@ -1319,6 +1254,10 @@ static inline void init_rq_hrtick(struct rq *rq)
 void hrtick_resched(void)
 {
 }
+
+static inline void init_hrtick(void)
+{
+}
 #endif
 
 /*
@@ -1438,8 +1377,8 @@ calc_delta_mine(unsigned long delta_exec, unsigned long weight,
 {
         u64 tmp;
 
-        if (unlikely(!lw->inv_weight))
-                lw->inv_weight = (WMULT_CONST-lw->weight/2) / (lw->weight+1);
+        if (!lw->inv_weight)
+                lw->inv_weight = 1 + (WMULT_CONST-lw->weight/2)/(lw->weight+1);
 
         tmp = (u64)delta_exec * weight;
         /*
@@ -1748,6 +1687,8 @@ __update_group_shares_cpu(struct task_group *tg, struct sched_domain *sd,
 
         if (shares < MIN_SHARES)
                 shares = MIN_SHARES;
+        else if (shares > MAX_SHARES)
+                shares = MAX_SHARES;
 
         __set_se_shares(tg->se[tcpu], shares);
 }
@@ -4339,8 +4280,10 @@ void account_system_time(struct task_struct *p, int hardirq_offset,
         struct rq *rq = this_rq();
         cputime64_t tmp;
 
-        if ((p->flags & PF_VCPU) && (irq_count() - hardirq_offset == 0))
-                return account_guest_time(p, cputime);
+        if ((p->flags & PF_VCPU) && (irq_count() - hardirq_offset == 0)) {
+                account_guest_time(p, cputime);
+                return;
+        }
 
         p->stime = cputime_add(p->stime, cputime);
 
@@ -4404,19 +4347,11 @@ void scheduler_tick(void)
         int cpu = smp_processor_id();
         struct rq *rq = cpu_rq(cpu);
         struct task_struct *curr = rq->curr;
-        u64 next_tick = rq->tick_timestamp + TICK_NSEC;
+
+        sched_clock_tick();
 
         spin_lock(&rq->lock);
-        __update_rq_clock(rq);
-        /*
-         * Let rq->clock advance by at least TICK_NSEC:
-         */
-        if (unlikely(rq->clock < next_tick)) {
-                rq->clock = next_tick;
-                rq->clock_underflows++;
-        }
-        rq->tick_timestamp = rq->clock;
-        update_last_tick_seen(rq);
+        update_rq_clock(rq);
         update_cpu_load(rq);
         curr->sched_class->task_tick(rq, curr, 0);
         spin_unlock(&rq->lock);
@@ -4570,7 +4505,7 @@ need_resched_nonpreemptible:
          * Do the rq-clock update outside the rq lock:
          */
         local_irq_disable();
-        __update_rq_clock(rq);
+        update_rq_clock(rq);
         spin_lock(&rq->lock);
         clear_tsk_need_resched(prev);
 
@@ -4595,9 +4530,9 @@ need_resched_nonpreemptible:
         prev->sched_class->put_prev_task(rq, prev);
         next = pick_next_task(rq, prev);
 
-        sched_info_switch(prev, next);
-
         if (likely(prev != next)) {
+                sched_info_switch(prev, next);
+
                 rq->nr_switches++;
                 rq->curr = next;
                 ++*switch_count;
@@ -7755,7 +7690,7 @@ void partition_sched_domains(int ndoms_new, cpumask_t *doms_new,
 {
         int i, j;
 
-        lock_doms_cur();
+        mutex_lock(&sched_domains_mutex);
 
         /* always unregister in case we don't destroy any domains */
         unregister_sched_domain_sysctl();
@@ -7804,7 +7739,7 @@ match2:
 
         register_sched_domain_sysctl();
 
-        unlock_doms_cur();
+        mutex_unlock(&sched_domains_mutex);
 }
 
 #if defined(CONFIG_SCHED_MC) || defined(CONFIG_SCHED_SMT)
@@ -7813,8 +7748,10 @@ int arch_reinit_sched_domains(void)
         int err;
 
         get_online_cpus();
+        mutex_lock(&sched_domains_mutex);
         detach_destroy_domains(&cpu_online_map);
         err = arch_init_sched_domains(&cpu_online_map);
+        mutex_unlock(&sched_domains_mutex);
         put_online_cpus();
 
         return err;
@@ -7932,13 +7869,16 @@ void __init sched_init_smp(void)
         BUG_ON(sched_group_nodes_bycpu == NULL);
 #endif
         get_online_cpus();
+        mutex_lock(&sched_domains_mutex);
         arch_init_sched_domains(&cpu_online_map);
         cpus_andnot(non_isolated_cpus, cpu_possible_map, cpu_isolated_map);
         if (cpus_empty(non_isolated_cpus))
                 cpu_set(smp_processor_id(), non_isolated_cpus);
+        mutex_unlock(&sched_domains_mutex);
         put_online_cpus();
         /* XXX: Theoretical race here - CPU may be hotplugged now */
         hotcpu_notifier(update_sched_domains, 0);
+        init_hrtick();
 
         /* Move init over to a non-isolated CPU */
         if (set_cpus_allowed_ptr(current, &non_isolated_cpus) < 0)
@@ -8025,7 +7965,7 @@ static void init_tg_cfs_entry(struct task_group *tg, struct cfs_rq *cfs_rq,
 
         se->my_q = cfs_rq;
         se->load.weight = tg->shares;
-        se->load.inv_weight = div64_64(1ULL<<32, se->load.weight);
+        se->load.inv_weight = 0;
         se->parent = parent;
 }
 #endif
@@ -8149,8 +8089,6 @@ void __init sched_init(void)
                 spin_lock_init(&rq->lock);
                 lockdep_set_class(&rq->lock, &rq->rq_lock_key);
                 rq->nr_running = 0;
-                rq->clock = 1;
-                update_last_tick_seen(rq);
                 init_cfs_rq(&rq->cfs, rq);
                 init_rt_rq(&rq->rt, rq);
 #ifdef CONFIG_FAIR_GROUP_SCHED
@@ -8294,6 +8232,7 @@ EXPORT_SYMBOL(__might_sleep);
 static void normalize_task(struct rq *rq, struct task_struct *p)
 {
         int on_rq;
+
         update_rq_clock(rq);
         on_rq = p->se.on_rq;
         if (on_rq)
@@ -8325,7 +8264,6 @@ void normalize_rt_tasks(void)
                 p->se.sleep_start               = 0;
                 p->se.block_start               = 0;
 #endif
-                task_rq(p)->clock               = 0;
 
                 if (!rt_task(p)) {
                         /*
@@ -8692,7 +8630,7 @@ static void __set_se_shares(struct sched_entity *se, unsigned long shares)
                 dequeue_entity(cfs_rq, se, 0);
 
         se->load.weight = shares;
-        se->load.inv_weight = div64_64((1ULL<<32), shares);
+        se->load.inv_weight = 0;
 
         if (on_rq)
                 enqueue_entity(cfs_rq, se, 0);
@@ -8722,13 +8660,10 @@ int sched_group_set_shares(struct task_group *tg, unsigned long shares)
         if (!tg->se[0])
                 return -EINVAL;
 
-        /*
-         * A weight of 0 or 1 can cause arithmetics problems.
-         * (The default weight is 1024 - so there's no practical
-         *  limitation from this.)
-         */
         if (shares < MIN_SHARES)
                 shares = MIN_SHARES;
+        else if (shares > MAX_SHARES)
+                shares = MAX_SHARES;
 
         mutex_lock(&shares_mutex);
         if (tg->shares == shares)
@@ -8753,7 +8688,7 @@ int sched_group_set_shares(struct task_group *tg, unsigned long shares)
                  * force a rebalance
                  */
                 cfs_rq_set_shares(tg->cfs_rq[i], 0);
-                set_se_shares(tg->se[i], shares/nr_cpu_ids);
+                set_se_shares(tg->se[i], shares);
         }
 
         /*
@@ -8787,7 +8722,7 @@ static unsigned long to_ratio(u64 period, u64 runtime)
         if (runtime == RUNTIME_INF)
                 return 1ULL << 16;
 
-        return div64_64(runtime << 16, period);
+        return div64_u64(runtime << 16, period);
 }
 
 #ifdef CONFIG_CGROUP_SCHED
diff --git a/kernel/sched_clock.c b/kernel/sched_clock.c
new file mode 100644
index 000000000000..9c597e37f7de
--- /dev/null
+++ b/kernel/sched_clock.c
@@ -0,0 +1,236 @@
+/*
+ * sched_clock for unstable cpu clocks
+ *
+ *  Copyright (C) 2008 Red Hat, Inc., Peter Zijlstra <pzijlstr@redhat.com>
+ *
+ * Based on code by:
+ *   Ingo Molnar <mingo@redhat.com>
+ *   Guillaume Chazarain <guichaz@gmail.com>
+ *
+ * Create a semi stable clock from a mixture of other events, including:
+ *  - gtod
+ *  - jiffies
+ *  - sched_clock()
+ *  - explicit idle events
+ *
+ * We use gtod as base and the unstable clock deltas. The deltas are filtered,
+ * making it monotonic and keeping it within an expected window.  This window
+ * is set up using jiffies.
+ *
+ * Furthermore, explicit sleep and wakeup hooks allow us to account for time
+ * that is otherwise invisible (TSC gets stopped).
+ *
+ * The clock: sched_clock_cpu() is monotonic per cpu, and should be somewhat
+ * consistent between cpus (never more than 1 jiffies difference).
+ */
+#include <linux/sched.h>
+#include <linux/percpu.h>
+#include <linux/spinlock.h>
+#include <linux/ktime.h>
+#include <linux/module.h>
+
+
+#ifdef CONFIG_HAVE_UNSTABLE_SCHED_CLOCK
+
+struct sched_clock_data {
+        /*
+         * Raw spinlock - this is a special case: this might be called
+         * from within instrumentation code so we dont want to do any
+         * instrumentation ourselves.
+         */
+        raw_spinlock_t          lock;
+
+        unsigned long           prev_jiffies;
+        u64                     prev_raw;
+        u64                     tick_raw;
+        u64                     tick_gtod;
+        u64                     clock;
+};
+
+static DEFINE_PER_CPU_SHARED_ALIGNED(struct sched_clock_data, sched_clock_data);
+
+static inline struct sched_clock_data *this_scd(void)
+{
+        return &__get_cpu_var(sched_clock_data);
+}
+
+static inline struct sched_clock_data *cpu_sdc(int cpu)
+{
+        return &per_cpu(sched_clock_data, cpu);
+}
+
+void sched_clock_init(void)
+{
+        u64 ktime_now = ktime_to_ns(ktime_get());
+        u64 now = 0;
+        int cpu;
+
+        for_each_possible_cpu(cpu) {
+                struct sched_clock_data *scd = cpu_sdc(cpu);
+
+                scd->lock = (raw_spinlock_t)__RAW_SPIN_LOCK_UNLOCKED;
+                scd->prev_jiffies = jiffies;
+                scd->prev_raw = now;
+                scd->tick_raw = now;
+                scd->tick_gtod = ktime_now;
+                scd->clock = ktime_now;
+        }
+}
+
+/*
+ * update the percpu scd from the raw @now value
+ *
+ *  - filter out backward motion
+ *  - use jiffies to generate a min,max window to clip the raw values
+ */
+static void __update_sched_clock(struct sched_clock_data *scd, u64 now)
+{
+        unsigned long now_jiffies = jiffies;
+        long delta_jiffies = now_jiffies - scd->prev_jiffies;
+        u64 clock = scd->clock;
+        u64 min_clock, max_clock;
+        s64 delta = now - scd->prev_raw;
+
+        WARN_ON_ONCE(!irqs_disabled());
+        min_clock = scd->tick_gtod + delta_jiffies * TICK_NSEC;
+
+        if (unlikely(delta < 0)) {
+                clock++;
+                goto out;
+        }
+
+        max_clock = min_clock + TICK_NSEC;
+
+        if (unlikely(clock + delta > max_clock)) {
+                if (clock < max_clock)
+                        clock = max_clock;
+                else
+                        clock++;
+        } else {
+                clock += delta;
+        }
+
+ out:
+        if (unlikely(clock < min_clock))
+                clock = min_clock;
+
+        scd->prev_raw = now;
+        scd->prev_jiffies = now_jiffies;
+        scd->clock = clock;
+}
+
+static void lock_double_clock(struct sched_clock_data *data1,
+                                struct sched_clock_data *data2)
+{
+        if (data1 < data2) {
+                __raw_spin_lock(&data1->lock);
+                __raw_spin_lock(&data2->lock);
+        } else {
+                __raw_spin_lock(&data2->lock);
+                __raw_spin_lock(&data1->lock);
+        }
+}
+
+u64 sched_clock_cpu(int cpu)
+{
+        struct sched_clock_data *scd = cpu_sdc(cpu);
+        u64 now, clock;
+
+        WARN_ON_ONCE(!irqs_disabled());
+        now = sched_clock();
+
+        if (cpu != raw_smp_processor_id()) {
+                /*
+                 * in order to update a remote cpu's clock based on our
+                 * unstable raw time rebase it against:
+                 *   tick_raw           (offset between raw counters)
+                 *   tick_gotd          (tick offset between cpus)
+                 */
+                struct sched_clock_data *my_scd = this_scd();
+
+                lock_double_clock(scd, my_scd);
+
+                now -= my_scd->tick_raw;
+                now += scd->tick_raw;
+
+                now -= my_scd->tick_gtod;
+                now += scd->tick_gtod;
+
+                __raw_spin_unlock(&my_scd->lock);
+        } else {
+                __raw_spin_lock(&scd->lock);
+        }
+
+        __update_sched_clock(scd, now);
+        clock = scd->clock;
+
+        __raw_spin_unlock(&scd->lock);
+
+        return clock;
+}
+
+void sched_clock_tick(void)
+{
+        struct sched_clock_data *scd = this_scd();
+        u64 now, now_gtod;
+
+        WARN_ON_ONCE(!irqs_disabled());
+
+        now = sched_clock();
+        now_gtod = ktime_to_ns(ktime_get());
+
+        __raw_spin_lock(&scd->lock);
+        __update_sched_clock(scd, now);
+        /*
+         * update tick_gtod after __update_sched_clock() because that will
+         * already observe 1 new jiffy; adding a new tick_gtod to that would
+         * increase the clock 2 jiffies.
+         */
+        scd->tick_raw = now;
+        scd->tick_gtod = now_gtod;
+        __raw_spin_unlock(&scd->lock);
+}
+
+/*
+ * We are going deep-idle (irqs are disabled):
+ */
+void sched_clock_idle_sleep_event(void)
+{
+        sched_clock_cpu(smp_processor_id());
+}
+EXPORT_SYMBOL_GPL(sched_clock_idle_sleep_event);
+
+/*
+ * We just idled delta nanoseconds (called with irqs disabled):
+ */
+void sched_clock_idle_wakeup_event(u64 delta_ns)
+{
+        struct sched_clock_data *scd = this_scd();
+        u64 now = sched_clock();
+
+        /*
+         * Override the previous timestamp and ignore all
+         * sched_clock() deltas that occured while we idled,
+         * and use the PM-provided delta_ns to advance the
+         * rq clock:
+         */
+        __raw_spin_lock(&scd->lock);
+        scd->prev_raw = now;
+        scd->clock += delta_ns;
+        __raw_spin_unlock(&scd->lock);
+
+        touch_softlockup_watchdog();
+}
+EXPORT_SYMBOL_GPL(sched_clock_idle_wakeup_event);
+
+#endif
+
+/*
+ * Scheduler clock - returns current time in nanosec units.
+ * This is default implementation.
+ * Architectures and sub-architectures can override this.
+ */
+unsigned long long __attribute__((weak)) sched_clock(void)
+{
+        return (unsigned long long)jiffies * (NSEC_PER_SEC / HZ);
+}
diff --git a/kernel/sched_debug.c b/kernel/sched_debug.c
index 8a9498e7c831..5f06118fbc31 100644
--- a/kernel/sched_debug.c
+++ b/kernel/sched_debug.c
@@ -204,13 +204,6 @@ static void print_cpu(struct seq_file *m, int cpu)
         PN(next_balance);
         P(curr->pid);
         PN(clock);
-        PN(idle_clock);
-        PN(prev_clock_raw);
-        P(clock_warps);
-        P(clock_overflows);
-        P(clock_underflows);
-        P(clock_deep_idle_events);
-        PN(clock_max_delta);
         P(cpu_load[0]);
         P(cpu_load[1]);
         P(cpu_load[2]);
@@ -357,8 +350,8 @@ void proc_sched_show_task(struct task_struct *p, struct seq_file *m)
 
                 avg_per_cpu = p->se.sum_exec_runtime;
                 if (p->se.nr_migrations) {
-                        avg_per_cpu = div64_64(avg_per_cpu,
-                                               p->se.nr_migrations);
+                        avg_per_cpu = div64_u64(avg_per_cpu,
+                                                p->se.nr_migrations);
                 } else {
                         avg_per_cpu = -1LL;
                 }
diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c
index 89fa32b4edf2..c863663d204d 100644
--- a/kernel/sched_fair.c
+++ b/kernel/sched_fair.c
@@ -682,6 +682,7 @@ enqueue_entity(struct cfs_rq *cfs_rq, struct sched_entity *se, int wakeup)
          * Update run-time statistics of the 'current'.
          */
         update_curr(cfs_rq);
+        account_entity_enqueue(cfs_rq, se);
 
         if (wakeup) {
                 place_entity(cfs_rq, se, 0);
@@ -692,7 +693,6 @@ enqueue_entity(struct cfs_rq *cfs_rq, struct sched_entity *se, int wakeup)
         check_spread(cfs_rq, se);
         if (se != cfs_rq->curr)
                 __enqueue_entity(cfs_rq, se);
-        account_entity_enqueue(cfs_rq, se);
 }
 
 static void update_avg(u64 *avg, u64 sample)
@@ -841,8 +841,10 @@ entity_tick(struct cfs_rq *cfs_rq, struct sched_entity *curr, int queued)
          * queued ticks are scheduled to match the slice, so don't bother
          * validating it and just reschedule.
          */
-        if (queued)
-                return resched_task(rq_of(cfs_rq)->curr);
+        if (queued) {
+                resched_task(rq_of(cfs_rq)->curr);
+                return;
+        }
         /*
          * don't let the period tick interfere with the hrtick preemption
          */
@@ -957,7 +959,7 @@ static void yield_task_fair(struct rq *rq)
                 return;
 
         if (likely(!sysctl_sched_compat_yield) && curr->policy != SCHED_BATCH) {
-                __update_rq_clock(rq);
+                update_rq_clock(rq);
                 /*
                  * Update run-time statistics of the 'current'.
                  */
@@ -1007,7 +1009,7 @@ static int wake_idle(int cpu, struct task_struct *p)
          * sibling runqueue info. This will avoid the checks and cache miss
          * penalities associated with that.
          */
-        if (idle_cpu(cpu) || cpu_rq(cpu)->nr_running > 1)
+        if (idle_cpu(cpu) || cpu_rq(cpu)->cfs.nr_running > 1)
                 return cpu;
 
         for_each_domain(cpu, sd) {
@@ -1611,30 +1613,6 @@ static const struct sched_class fair_sched_class = {
 };
 
 #ifdef CONFIG_SCHED_DEBUG
-static void
-print_cfs_rq_tasks(struct seq_file *m, struct cfs_rq *cfs_rq, int depth)
-{
-        struct sched_entity *se;
-
-        if (!cfs_rq)
-                return;
-
-        list_for_each_entry_rcu(se, &cfs_rq->tasks, group_node) {
-                int i;
-
-                for (i = depth; i; i--)
-                        seq_puts(m, "  ");
-
-                seq_printf(m, "%lu %s %lu\n",
-                                se->load.weight,
-                                entity_is_task(se) ? "T" : "G",
-                                calc_delta_weight(SCHED_LOAD_SCALE, se)
-                                );
-                if (!entity_is_task(se))
-                        print_cfs_rq_tasks(m, group_cfs_rq(se), depth + 1);
-        }
-}
-
 static void print_cfs_stats(struct seq_file *m, int cpu)
 {
         struct cfs_rq *cfs_rq;
@@ -1642,9 +1620,6 @@ static void print_cfs_stats(struct seq_file *m, int cpu)
         rcu_read_lock();
         for_each_leaf_cfs_rq(cpu_rq(cpu), cfs_rq)
                 print_cfs_rq(m, cpu, cfs_rq);
-
-        seq_printf(m, "\nWeight tree:\n");
-        print_cfs_rq_tasks(m, &cpu_rq(cpu)->cfs, 1);
         rcu_read_unlock();
 }
 #endif
diff --git a/kernel/sched_idletask.c b/kernel/sched_idletask.c
index 2bcafa375633..3a4f92dbbe66 100644
--- a/kernel/sched_idletask.c
+++ b/kernel/sched_idletask.c
@@ -99,7 +99,7 @@ static void prio_changed_idle(struct rq *rq, struct task_struct *p,
 /*
  * Simple, special scheduling class for the per-CPU idle tasks:
  */
-const struct sched_class idle_sched_class = {
+static const struct sched_class idle_sched_class = {
         /* .next is NULL */
         /* no enqueue/yield_task for idle tasks */
 
diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c
index c2730a5a4f05..060e87b0cb1c 100644
--- a/kernel/sched_rt.c
+++ b/kernel/sched_rt.c
@@ -1098,11 +1098,14 @@ static void post_schedule_rt(struct rq *rq)
         }
 }
 
-
+/*
+ * If we are not running and we are not going to reschedule soon, we should
+ * try to push tasks away now
+ */
 static void task_wake_up_rt(struct rq *rq, struct task_struct *p)
 {
         if (!task_running(rq, p) &&
-            (p->prio >= rq->rt.highest_prio) &&
+            !test_tsk_need_resched(rq->curr) &&
             rq->rt.overloaded)
                 push_rt_tasks(rq);
 }
@@ -1309,7 +1312,7 @@ static void set_curr_task_rt(struct rq *rq)
         p->se.exec_start = rq->clock;
 }
 
-const struct sched_class rt_sched_class = {
+static const struct sched_class rt_sched_class = {
         .next                   = &fair_sched_class,
         .enqueue_task           = enqueue_task_rt,
         .dequeue_task           = dequeue_task_rt,
diff --git a/kernel/softirq.c b/kernel/softirq.c
index 3c44956ee7e2..36e061740047 100644
--- a/kernel/softirq.c
+++ b/kernel/softirq.c
@@ -589,16 +589,20 @@ static void takeover_tasklets(unsigned int cpu)
         local_irq_disable();
 
         /* Find end, append list for that CPU. */
-        *__get_cpu_var(tasklet_vec).tail = per_cpu(tasklet_vec, cpu).head;
-        __get_cpu_var(tasklet_vec).tail = per_cpu(tasklet_vec, cpu).tail;
-        per_cpu(tasklet_vec, cpu).head = NULL;
-        per_cpu(tasklet_vec, cpu).tail = &per_cpu(tasklet_vec, cpu).head;
+        if (&per_cpu(tasklet_vec, cpu).head != per_cpu(tasklet_vec, cpu).tail) {
+                *(__get_cpu_var(tasklet_vec).tail) = per_cpu(tasklet_vec, cpu).head;
+                __get_cpu_var(tasklet_vec).tail = per_cpu(tasklet_vec, cpu).tail;
+                per_cpu(tasklet_vec, cpu).head = NULL;
+                per_cpu(tasklet_vec, cpu).tail = &per_cpu(tasklet_vec, cpu).head;
+        }
         raise_softirq_irqoff(TASKLET_SOFTIRQ);
 
-        *__get_cpu_var(tasklet_hi_vec).tail = per_cpu(tasklet_hi_vec, cpu).head;
-        __get_cpu_var(tasklet_hi_vec).tail = per_cpu(tasklet_hi_vec, cpu).tail;
-        per_cpu(tasklet_hi_vec, cpu).head = NULL;
-        per_cpu(tasklet_hi_vec, cpu).tail = &per_cpu(tasklet_hi_vec, cpu).head;
+        if (&per_cpu(tasklet_hi_vec, cpu).head != per_cpu(tasklet_hi_vec, cpu).tail) {
+                *__get_cpu_var(tasklet_hi_vec).tail = per_cpu(tasklet_hi_vec, cpu).head;
+                __get_cpu_var(tasklet_hi_vec).tail = per_cpu(tasklet_hi_vec, cpu).tail;
+                per_cpu(tasklet_hi_vec, cpu).head = NULL;
+                per_cpu(tasklet_hi_vec, cpu).tail = &per_cpu(tasklet_hi_vec, cpu).head;
+        }
         raise_softirq_irqoff(HI_SOFTIRQ);
 
         local_irq_enable();
diff --git a/kernel/time.c b/kernel/time.c
index 86729042e4cd..6a08660b4fac 100644
--- a/kernel/time.c
+++ b/kernel/time.c
@@ -36,6 +36,7 @@
 #include <linux/security.h>
 #include <linux/fs.h>
 #include <linux/slab.h>
+#include <linux/math64.h>
 
 #include <asm/uaccess.h>
 #include <asm/unistd.h>
@@ -245,7 +246,7 @@ unsigned int inline jiffies_to_msecs(const unsigned long j)
         return (j + (HZ / MSEC_PER_SEC) - 1)/(HZ / MSEC_PER_SEC);
 #else
 # if BITS_PER_LONG == 32
-        return ((u64)HZ_TO_MSEC_MUL32 * j) >> HZ_TO_MSEC_SHR32;
+        return (HZ_TO_MSEC_MUL32 * j) >> HZ_TO_MSEC_SHR32;
 # else
         return (j * HZ_TO_MSEC_NUM) / HZ_TO_MSEC_DEN;
 # endif
@@ -261,7 +262,7 @@ unsigned int inline jiffies_to_usecs(const unsigned long j)
         return (j + (HZ / USEC_PER_SEC) - 1)/(HZ / USEC_PER_SEC);
 #else
 # if BITS_PER_LONG == 32
-        return ((u64)HZ_TO_USEC_MUL32 * j) >> HZ_TO_USEC_SHR32;
+        return (HZ_TO_USEC_MUL32 * j) >> HZ_TO_USEC_SHR32;
 # else
         return (j * HZ_TO_USEC_NUM) / HZ_TO_USEC_DEN;
 # endif
@@ -391,13 +392,17 @@ EXPORT_SYMBOL(set_normalized_timespec);
 struct timespec ns_to_timespec(const s64 nsec)
 {
         struct timespec ts;
+        s32 rem;
 
         if (!nsec)
                 return (struct timespec) {0, 0};
 
-        ts.tv_sec = div_long_long_rem_signed(nsec, NSEC_PER_SEC, &ts.tv_nsec);
-        if (unlikely(nsec < 0))
-                set_normalized_timespec(&ts, ts.tv_sec, ts.tv_nsec);
+        ts.tv_sec = div_s64_rem(nsec, NSEC_PER_SEC, &rem);
+        if (unlikely(rem < 0)) {
+                ts.tv_sec--;
+                rem += NSEC_PER_SEC;
+        }
+        ts.tv_nsec = rem;
 
         return ts;
 }
@@ -471,7 +476,7 @@ unsigned long msecs_to_jiffies(const unsigned int m)
         if (HZ > MSEC_PER_SEC && m > jiffies_to_msecs(MAX_JIFFY_OFFSET))
                 return MAX_JIFFY_OFFSET;
 
-        return ((u64)MSEC_TO_HZ_MUL32 * m + MSEC_TO_HZ_ADJ32)
+        return (MSEC_TO_HZ_MUL32 * m + MSEC_TO_HZ_ADJ32)
                 >> MSEC_TO_HZ_SHR32;
 #endif
 }
@@ -486,7 +491,7 @@ unsigned long usecs_to_jiffies(const unsigned int u)
 #elif HZ > USEC_PER_SEC && !(HZ % USEC_PER_SEC)
         return u * (HZ / USEC_PER_SEC);
 #else
-        return ((u64)USEC_TO_HZ_MUL32 * u + USEC_TO_HZ_ADJ32)
+        return (USEC_TO_HZ_MUL32 * u + USEC_TO_HZ_ADJ32)
                 >> USEC_TO_HZ_SHR32;
 #endif
 }
@@ -527,8 +532,10 @@ jiffies_to_timespec(const unsigned long jiffies, struct timespec *value)
          * Convert jiffies to nanoseconds and separate with
          * one divide.
          */
-        u64 nsec = (u64)jiffies * TICK_NSEC;
-        value->tv_sec = div_long_long_rem(nsec, NSEC_PER_SEC, &value->tv_nsec);
+        u32 rem;
+        value->tv_sec = div_u64_rem((u64)jiffies * TICK_NSEC,
+                                    NSEC_PER_SEC, &rem);
+        value->tv_nsec = rem;
 }
 EXPORT_SYMBOL(jiffies_to_timespec);
 
@@ -566,12 +573,11 @@ void jiffies_to_timeval(const unsigned long jiffies, struct timeval *value)
          * Convert jiffies to nanoseconds and separate with
          * one divide.
          */
-        u64 nsec = (u64)jiffies * TICK_NSEC;
-        long tv_usec;
+        u32 rem;
 
-        value->tv_sec = div_long_long_rem(nsec, NSEC_PER_SEC, &tv_usec);
-        tv_usec /= NSEC_PER_USEC;
-        value->tv_usec = tv_usec;
+        value->tv_sec = div_u64_rem((u64)jiffies * TICK_NSEC,
+                                    NSEC_PER_SEC, &rem);
+        value->tv_usec = rem / NSEC_PER_USEC;
 }
 EXPORT_SYMBOL(jiffies_to_timeval);
 
@@ -587,9 +593,7 @@ clock_t jiffies_to_clock_t(long x)
         return x / (HZ / USER_HZ);
 # endif
 #else
-        u64 tmp = (u64)x * TICK_NSEC;
-        do_div(tmp, (NSEC_PER_SEC / USER_HZ));
-        return (long)tmp;
+        return div_u64((u64)x * TICK_NSEC, NSEC_PER_SEC / USER_HZ);
 #endif
 }
 EXPORT_SYMBOL(jiffies_to_clock_t);
@@ -601,16 +605,12 @@ unsigned long clock_t_to_jiffies(unsigned long x)
                 return ~0UL;
         return x * (HZ / USER_HZ);
 #else
-        u64 jif;
-
         /* Don't worry about loss of precision here .. */
         if (x >= ~0UL / HZ * USER_HZ)
                 return ~0UL;
 
         /* .. but do try to contain it here */
-        jif = x * (u64) HZ;
-        do_div(jif, USER_HZ);
-        return jif;
+        return div_u64((u64)x * HZ, USER_HZ);
 #endif
 }
 EXPORT_SYMBOL(clock_t_to_jiffies);
@@ -619,10 +619,9 @@ u64 jiffies_64_to_clock_t(u64 x)
 {
 #if (TICK_NSEC % (NSEC_PER_SEC / USER_HZ)) == 0
 # if HZ < USER_HZ
-        x *= USER_HZ;
-        do_div(x, HZ);
+        x = div_u64(x * USER_HZ, HZ);
 # elif HZ > USER_HZ
-        do_div(x, HZ / USER_HZ);
+        x = div_u64(x, HZ / USER_HZ);
 # else
         /* Nothing to do */
 # endif
@@ -632,8 +631,7 @@ u64 jiffies_64_to_clock_t(u64 x)
          * but even this doesn't overflow in hundreds of years
          * in 64 bits, so..
          */
-        x *= TICK_NSEC;
-        do_div(x, (NSEC_PER_SEC / USER_HZ));
+        x = div_u64(x * TICK_NSEC, (NSEC_PER_SEC / USER_HZ));
 #endif
         return x;
 }
@@ -642,21 +640,17 @@ EXPORT_SYMBOL(jiffies_64_to_clock_t);
 u64 nsec_to_clock_t(u64 x)
 {
 #if (NSEC_PER_SEC % USER_HZ) == 0
-        do_div(x, (NSEC_PER_SEC / USER_HZ));
+        return div_u64(x, NSEC_PER_SEC / USER_HZ);
 #elif (USER_HZ % 512) == 0
-        x *= USER_HZ/512;
-        do_div(x, (NSEC_PER_SEC / 512));
+        return div_u64(x * USER_HZ / 512, NSEC_PER_SEC / 512);
 #else
         /*
          * max relative error 5.7e-8 (1.8s per year) for USER_HZ <= 1024,
          * overflow after 64.99 years.
          * exact for HZ=60, 72, 90, 120, 144, 180, 300, 600, 900, ...
          */
-        x *= 9;
-        do_div(x, (unsigned long)((9ull * NSEC_PER_SEC + (USER_HZ/2)) /
-                                  USER_HZ));
+        return div_u64(x * 9, (9ull * NSEC_PER_SEC + (USER_HZ / 2)) / USER_HZ);
 #endif
-        return x;
 }
 
 #if (BITS_PER_LONG < 64)
diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c
index 73961f35fdc8..dadde5361f32 100644
--- a/kernel/time/clocksource.c
+++ b/kernel/time/clocksource.c
@@ -471,10 +471,10 @@ sysfs_show_available_clocksources(struct sys_device *dev, char *buf)
 /*
  * Sysfs setup bits:
  */
-static SYSDEV_ATTR(current_clocksource, 0600, sysfs_show_current_clocksources,
+static SYSDEV_ATTR(current_clocksource, 0644, sysfs_show_current_clocksources,
                    sysfs_override_clocksource);
 
-static SYSDEV_ATTR(available_clocksource, 0600,
+static SYSDEV_ATTR(available_clocksource, 0444,
                    sysfs_show_available_clocksources, NULL);
 
 static struct sysdev_class clocksource_sysclass = {
diff --git a/kernel/time/ntp.c b/kernel/time/ntp.c
index 5fd9b9469770..5125ddd8196b 100644
--- a/kernel/time/ntp.c
+++ b/kernel/time/ntp.c
@@ -15,7 +15,8 @@
 #include <linux/jiffies.h>
 #include <linux/hrtimer.h>
 #include <linux/capability.h>
-#include <asm/div64.h>
+#include <linux/math64.h>
+#include <linux/clocksource.h>
 #include <asm/timex.h>
 
 /*
@@ -23,11 +24,14 @@
  */
 unsigned long tick_usec = TICK_USEC;            /* USER_HZ period (usec) */
 unsigned long tick_nsec;                        /* ACTHZ period (nsec) */
-static u64 tick_length, tick_length_base;
+u64 tick_length;
+static u64 tick_length_base;
+
+static struct hrtimer leap_timer;
 
 #define MAX_TICKADJ             500             /* microsecs */
 #define MAX_TICKADJ_SCALED      (((u64)(MAX_TICKADJ * NSEC_PER_USEC) << \
-                                  TICK_LENGTH_SHIFT) / NTP_INTERVAL_FREQ)
+                                  NTP_SCALE_SHIFT) / NTP_INTERVAL_FREQ)
 
 /*
  * phase-lock loop variables
@@ -35,11 +39,12 @@ static u64 tick_length, tick_length_base;
 /* TIME_ERROR prevents overwriting the CMOS clock */
 static int time_state = TIME_OK;        /* clock synchronization status */
 int time_status = STA_UNSYNC;           /* clock status bits            */
-static s64 time_offset;         /* time adjustment (ns)         */
+static long time_tai;                   /* TAI offset (s)               */
+static s64 time_offset;                 /* time adjustment (ns)         */
 static long time_constant = 2;          /* pll time constant            */
 long time_maxerror = NTP_PHASE_LIMIT;   /* maximum error (us)           */
 long time_esterror = NTP_PHASE_LIMIT;   /* estimated error (us)         */
-long time_freq;                         /* frequency offset (scaled ppm)*/
+static s64 time_freq;                   /* frequency offset (scaled ns/s)*/
 static long time_reftime;               /* time at last adjustment (s)  */
 long time_adjust;
 static long ntp_tick_adj;
@@ -47,16 +52,56 @@ static long ntp_tick_adj;
 static void ntp_update_frequency(void)
 {
         u64 second_length = (u64)(tick_usec * NSEC_PER_USEC * USER_HZ)
-                                << TICK_LENGTH_SHIFT;
-        second_length += (s64)ntp_tick_adj << TICK_LENGTH_SHIFT;
-        second_length += (s64)time_freq << (TICK_LENGTH_SHIFT - SHIFT_NSEC);
+                                << NTP_SCALE_SHIFT;
+        second_length += (s64)ntp_tick_adj << NTP_SCALE_SHIFT;
+        second_length += time_freq;
 
         tick_length_base = second_length;
 
-        do_div(second_length, HZ);
-        tick_nsec = second_length >> TICK_LENGTH_SHIFT;
+        tick_nsec = div_u64(second_length, HZ) >> NTP_SCALE_SHIFT;
+        tick_length_base = div_u64(tick_length_base, NTP_INTERVAL_FREQ);
+}
+
+static void ntp_update_offset(long offset)
+{
+        long mtemp;
+        s64 freq_adj;
+
+        if (!(time_status & STA_PLL))
+                return;
 
-        do_div(tick_length_base, NTP_INTERVAL_FREQ);
+        if (!(time_status & STA_NANO))
+                offset *= NSEC_PER_USEC;
+
+        /*
+         * Scale the phase adjustment and
+         * clamp to the operating range.
+         */
+        offset = min(offset, MAXPHASE);
+        offset = max(offset, -MAXPHASE);
+
+        /*
+         * Select how the frequency is to be controlled
+         * and in which mode (PLL or FLL).
+         */
+        if (time_status & STA_FREQHOLD || time_reftime == 0)
+                time_reftime = xtime.tv_sec;
+        mtemp = xtime.tv_sec - time_reftime;
+        time_reftime = xtime.tv_sec;
+
+        freq_adj = (s64)offset * mtemp;
+        freq_adj <<= NTP_SCALE_SHIFT - 2 * (SHIFT_PLL + 2 + time_constant);
+        time_status &= ~STA_MODE;
+        if (mtemp >= MINSEC && (time_status & STA_FLL || mtemp > MAXSEC)) {
+                freq_adj += div_s64((s64)offset << (NTP_SCALE_SHIFT - SHIFT_FLL),
+                                    mtemp);
+                time_status |= STA_MODE;
+        }
+        freq_adj += time_freq;
+        freq_adj = min(freq_adj, MAXFREQ_SCALED);
+        time_freq = max(freq_adj, -MAXFREQ_SCALED);
+
+        time_offset = div_s64((s64)offset << NTP_SCALE_SHIFT, NTP_INTERVAL_FREQ);
 }
 
 /**
@@ -78,62 +123,70 @@ void ntp_clear(void)
 }
 
 /*
- * this routine handles the overflow of the microsecond field
- *
- * The tricky bits of code to handle the accurate clock support
- * were provided by Dave Mills (Mills@UDEL.EDU) of NTP fame.
- * They were originally developed for SUN and DEC kernels.
- * All the kudos should go to Dave for this stuff.
+ * Leap second processing. If in leap-insert state at the end of the
+ * day, the system clock is set back one second; if in leap-delete
+ * state, the system clock is set ahead one second.
  */
-void second_overflow(void)
+static enum hrtimer_restart ntp_leap_second(struct hrtimer *timer)
 {
-        long time_adj;
+        enum hrtimer_restart res = HRTIMER_NORESTART;
 
-        /* Bump the maxerror field */
-        time_maxerror += MAXFREQ >> SHIFT_USEC;
-        if (time_maxerror > NTP_PHASE_LIMIT) {
-                time_maxerror = NTP_PHASE_LIMIT;
-                time_status |= STA_UNSYNC;
-        }
+        write_seqlock_irq(&xtime_lock);
 
-        /*
-         * Leap second processing. If in leap-insert state at the end of the
-         * day, the system clock is set back one second; if in leap-delete
-         * state, the system clock is set ahead one second. The microtime()
-         * routine or external clock driver will insure that reported time is
-         * always monotonic. The ugly divides should be replaced.
-         */
         switch (time_state) {
         case TIME_OK:
-                if (time_status & STA_INS)
-                        time_state = TIME_INS;
-                else if (time_status & STA_DEL)
-                        time_state = TIME_DEL;
                 break;
         case TIME_INS:
-                if (xtime.tv_sec % 86400 == 0) {
-                        xtime.tv_sec--;
-                        wall_to_monotonic.tv_sec++;
-                        time_state = TIME_OOP;
-                        printk(KERN_NOTICE "Clock: inserting leap second "
-                                        "23:59:60 UTC\n");
-                }
+                xtime.tv_sec--;
+                wall_to_monotonic.tv_sec++;
+                time_state = TIME_OOP;
+                printk(KERN_NOTICE "Clock: "
+                       "inserting leap second 23:59:60 UTC\n");
+                leap_timer.expires = ktime_add_ns(leap_timer.expires,
+                                                  NSEC_PER_SEC);
+                res = HRTIMER_RESTART;
                 break;
         case TIME_DEL:
-                if ((xtime.tv_sec + 1) % 86400 == 0) {
-                        xtime.tv_sec++;
-                        wall_to_monotonic.tv_sec--;
-                        time_state = TIME_WAIT;
-                        printk(KERN_NOTICE "Clock: deleting leap second "
-                                        "23:59:59 UTC\n");
-                }
+                xtime.tv_sec++;
+                time_tai--;
+                wall_to_monotonic.tv_sec--;
+                time_state = TIME_WAIT;
+                printk(KERN_NOTICE "Clock: "
+                       "deleting leap second 23:59:59 UTC\n");
                 break;
         case TIME_OOP:
+                time_tai++;
                 time_state = TIME_WAIT;
-                break;
+                /* fall through */
         case TIME_WAIT:
                 if (!(time_status & (STA_INS | STA_DEL)))
-                time_state = TIME_OK;
+                        time_state = TIME_OK;
+                break;
+        }
+        update_vsyscall(&xtime, clock);
+
+        write_sequnlock_irq(&xtime_lock);
+
+        return res;
+}
+
+/*
+ * this routine handles the overflow of the microsecond field
+ *
+ * The tricky bits of code to handle the accurate clock support
+ * were provided by Dave Mills (Mills@UDEL.EDU) of NTP fame.
+ * They were originally developed for SUN and DEC kernels.
+ * All the kudos should go to Dave for this stuff.
+ */
+void second_overflow(void)
+{
+        s64 time_adj;
+
+        /* Bump the maxerror field */
+        time_maxerror += MAXFREQ / NSEC_PER_USEC;
+        if (time_maxerror > NTP_PHASE_LIMIT) {
+                time_maxerror = NTP_PHASE_LIMIT;
+                time_status |= STA_UNSYNC;
         }
 
         /*
@@ -143,7 +196,7 @@ void second_overflow(void)
         tick_length = tick_length_base;
         time_adj = shift_right(time_offset, SHIFT_PLL + time_constant);
         time_offset -= time_adj;
-        tick_length += (s64)time_adj << (TICK_LENGTH_SHIFT - SHIFT_UPDATE);
+        tick_length += time_adj;
 
         if (unlikely(time_adjust)) {
                 if (time_adjust > MAX_TICKADJ) {
@@ -154,25 +207,12 @@ void second_overflow(void)
                         tick_length -= MAX_TICKADJ_SCALED;
                 } else {
                         tick_length += (s64)(time_adjust * NSEC_PER_USEC /
-                                        NTP_INTERVAL_FREQ) << TICK_LENGTH_SHIFT;
+                                        NTP_INTERVAL_FREQ) << NTP_SCALE_SHIFT;
                         time_adjust = 0;
                 }
         }
 }
 
-/*
- * Return how long ticks are at the moment, that is, how much time
- * update_wall_time_one_tick will add to xtime next time we call it
- * (assuming no calls to do_adjtimex in the meantime).
- * The return value is in fixed-point nanoseconds shifted by the
- * specified number of bits to the right of the binary point.
- * This function has no side-effects.
- */
-u64 current_tick_length(void)
-{
-        return tick_length;
-}
-
 #ifdef CONFIG_GENERIC_CMOS_UPDATE
 
 /* Disable the cmos update - used by virtualization and embedded */
@@ -236,8 +276,8 @@ static inline void notify_cmos_timer(void) { }
  */
 int do_adjtimex(struct timex *txc)
 {
-        long mtemp, save_adjust, rem;
-        s64 freq_adj, temp64;
+        struct timespec ts;
+        long save_adjust, sec;
         int result;
 
         /* In order to modify anything, you gotta be super-user! */
@@ -247,147 +287,132 @@ int do_adjtimex(struct timex *txc)
         /* Now we validate the data before disabling interrupts */
 
         if ((txc->modes & ADJ_OFFSET_SINGLESHOT) == ADJ_OFFSET_SINGLESHOT) {
-          /* singleshot must not be used with any other mode bits */
-                if (txc->modes != ADJ_OFFSET_SINGLESHOT &&
-                                        txc->modes != ADJ_OFFSET_SS_READ)
+                /* singleshot must not be used with any other mode bits */
+                if (txc->modes & ~ADJ_OFFSET_SS_READ)
                         return -EINVAL;
         }
 
-        if (txc->modes != ADJ_OFFSET_SINGLESHOT && (txc->modes & ADJ_OFFSET))
-          /* adjustment Offset limited to +- .512 seconds */
-                if (txc->offset <= - MAXPHASE || txc->offset >= MAXPHASE )
-                        return -EINVAL;
-
         /* if the quartz is off by more than 10% something is VERY wrong ! */
         if (txc->modes & ADJ_TICK)
                 if (txc->tick <  900000/USER_HZ ||
                     txc->tick > 1100000/USER_HZ)
                         return -EINVAL;
 
+        if (time_state != TIME_OK && txc->modes & ADJ_STATUS)
+                hrtimer_cancel(&leap_timer);
+        getnstimeofday(&ts);
+
         write_seqlock_irq(&xtime_lock);
-        result = time_state;    /* mostly `TIME_OK' */
 
         /* Save for later - semantics of adjtime is to return old value */
         save_adjust = time_adjust;
 
-#if 0   /* STA_CLOCKERR is never set yet */
-        time_status &= ~STA_CLOCKERR;           /* reset STA_CLOCKERR */
-#endif
         /* If there are input parameters, then process them */
-        if (txc->modes)
-        {
-            if (txc->modes & ADJ_STATUS)        /* only set allowed bits */
-                time_status =  (txc->status & ~STA_RONLY) |
-                              (time_status & STA_RONLY);
-
-            if (txc->modes & ADJ_FREQUENCY) {   /* p. 22 */
-                if (txc->freq > MAXFREQ || txc->freq < -MAXFREQ) {
-                    result = -EINVAL;
-                    goto leave;
-                }
-                time_freq = ((s64)txc->freq * NSEC_PER_USEC)
-                                >> (SHIFT_USEC - SHIFT_NSEC);
-            }
-
-            if (txc->modes & ADJ_MAXERROR) {
-                if (txc->maxerror < 0 || txc->maxerror >= NTP_PHASE_LIMIT) {
-                    result = -EINVAL;
-                    goto leave;
+        if (txc->modes) {
+                if (txc->modes & ADJ_STATUS) {
+                        if ((time_status & STA_PLL) &&
+                            !(txc->status & STA_PLL)) {
+                                time_state = TIME_OK;
+                                time_status = STA_UNSYNC;
+                        }
+                        /* only set allowed bits */
+                        time_status &= STA_RONLY;
+                        time_status |= txc->status & ~STA_RONLY;
+
+                        switch (time_state) {
+                        case TIME_OK:
+                        start_timer:
+                                sec = ts.tv_sec;
+                                if (time_status & STA_INS) {
+                                        time_state = TIME_INS;
+                                        sec += 86400 - sec % 86400;
+                                        hrtimer_start(&leap_timer, ktime_set(sec, 0), HRTIMER_MODE_ABS);
+                                } else if (time_status & STA_DEL) {
+                                        time_state = TIME_DEL;
+                                        sec += 86400 - (sec + 1) % 86400;
+                                        hrtimer_start(&leap_timer, ktime_set(sec, 0), HRTIMER_MODE_ABS);
+                                }
+                                break;
+                        case TIME_INS:
+                        case TIME_DEL:
+                                time_state = TIME_OK;
+                                goto start_timer;
+                                break;
+                        case TIME_WAIT:
+                                if (!(time_status & (STA_INS | STA_DEL)))
+                                        time_state = TIME_OK;
+                                break;
+                        case TIME_OOP:
+                                hrtimer_restart(&leap_timer);
+                                break;
+                        }
                 }
-                time_maxerror = txc->maxerror;
-            }
 
-            if (txc->modes & ADJ_ESTERROR) {
-                if (txc->esterror < 0 || txc->esterror >= NTP_PHASE_LIMIT) {
-                    result = -EINVAL;
-                    goto leave;
+                if (txc->modes & ADJ_NANO)
+                        time_status |= STA_NANO;
+                if (txc->modes & ADJ_MICRO)
+                        time_status &= ~STA_NANO;
+
+                if (txc->modes & ADJ_FREQUENCY) {
+                        time_freq = (s64)txc->freq * PPM_SCALE;
+                        time_freq = min(time_freq, MAXFREQ_SCALED);
+                        time_freq = max(time_freq, -MAXFREQ_SCALED);
                 }
-                time_esterror = txc->esterror;
-            }
 
-            if (txc->modes & ADJ_TIMECONST) {   /* p. 24 */
-                if (txc->constant < 0) {        /* NTP v4 uses values > 6 */
-                    result = -EINVAL;
-                    goto leave;
+                if (txc->modes & ADJ_MAXERROR)
+                        time_maxerror = txc->maxerror;
+                if (txc->modes & ADJ_ESTERROR)
+                        time_esterror = txc->esterror;
+
+                if (txc->modes & ADJ_TIMECONST) {
+                        time_constant = txc->constant;
+                        if (!(time_status & STA_NANO))
+                                time_constant += 4;
+                        time_constant = min(time_constant, (long)MAXTC);
+                        time_constant = max(time_constant, 0l);
                 }
-                time_constant = min(txc->constant + 4, (long)MAXTC);
-            }
 
-            if (txc->modes & ADJ_OFFSET) {      /* values checked earlier */
-                if (txc->modes == ADJ_OFFSET_SINGLESHOT) {
-                    /* adjtime() is independent from ntp_adjtime() */
-                    time_adjust = txc->offset;
+                if (txc->modes & ADJ_TAI && txc->constant > 0)
+                        time_tai = txc->constant;
+
+                if (txc->modes & ADJ_OFFSET) {
+                        if (txc->modes == ADJ_OFFSET_SINGLESHOT)
+                                /* adjtime() is independent from ntp_adjtime() */
+                                time_adjust = txc->offset;
+                        else
+                                ntp_update_offset(txc->offset);
                 }
-                else if (time_status & STA_PLL) {
-                    time_offset = txc->offset * NSEC_PER_USEC;
-
-                    /*
-                     * Scale the phase adjustment and
-                     * clamp to the operating range.
-                     */
-                    time_offset = min(time_offset, (s64)MAXPHASE * NSEC_PER_USEC);
-                    time_offset = max(time_offset, (s64)-MAXPHASE * NSEC_PER_USEC);
-
-                    /*
-                     * Select whether the frequency is to be controlled
-                     * and in which mode (PLL or FLL). Clamp to the operating
-                     * range. Ugly multiply/divide should be replaced someday.
-                     */
-
-                    if (time_status & STA_FREQHOLD || time_reftime == 0)
-                        time_reftime = xtime.tv_sec;
-                    mtemp = xtime.tv_sec - time_reftime;
-                    time_reftime = xtime.tv_sec;
-
-                    freq_adj = time_offset * mtemp;
-                    freq_adj = shift_right(freq_adj, time_constant * 2 +
-                                           (SHIFT_PLL + 2) * 2 - SHIFT_NSEC);
-                    if (mtemp >= MINSEC && (time_status & STA_FLL || mtemp > MAXSEC)) {
-                        u64 utemp64;
-                        temp64 = time_offset << (SHIFT_NSEC - SHIFT_FLL);
-                        if (time_offset < 0) {
-                            utemp64 = -temp64;
-                            do_div(utemp64, mtemp);
-                            freq_adj -= utemp64;
-                        } else {
-                            utemp64 = temp64;
-                            do_div(utemp64, mtemp);
-                            freq_adj += utemp64;
-                        }
-                    }
-                    freq_adj += time_freq;
-                    freq_adj = min(freq_adj, (s64)MAXFREQ_NSEC);
-                    time_freq = max(freq_adj, (s64)-MAXFREQ_NSEC);
-                    time_offset = div_long_long_rem_signed(time_offset,
-                                                           NTP_INTERVAL_FREQ,
-                                                           &rem);
-                    time_offset <<= SHIFT_UPDATE;
-                } /* STA_PLL */
-            } /* txc->modes & ADJ_OFFSET */
-            if (txc->modes & ADJ_TICK)
-                tick_usec = txc->tick;
-
-            if (txc->modes & (ADJ_TICK|ADJ_FREQUENCY|ADJ_OFFSET))
-                    ntp_update_frequency();
-        } /* txc->modes */
-leave:  if ((time_status & (STA_UNSYNC|STA_CLOCKERR)) != 0)
+                if (txc->modes & ADJ_TICK)
+                        tick_usec = txc->tick;
+
+                if (txc->modes & (ADJ_TICK|ADJ_FREQUENCY|ADJ_OFFSET))
+                        ntp_update_frequency();
+        }
+
+        result = time_state;    /* mostly `TIME_OK' */
+        if (time_status & (STA_UNSYNC|STA_CLOCKERR))
                 result = TIME_ERROR;
 
         if ((txc->modes == ADJ_OFFSET_SINGLESHOT) ||
-                        (txc->modes == ADJ_OFFSET_SS_READ))
+            (txc->modes == ADJ_OFFSET_SS_READ))
                 txc->offset = save_adjust;
-        else
-                txc->offset = ((long)shift_right(time_offset, SHIFT_UPDATE)) *
-                                NTP_INTERVAL_FREQ / 1000;
-        txc->freq          = (time_freq / NSEC_PER_USEC) <<
-                                (SHIFT_USEC - SHIFT_NSEC);
+        else {
+                txc->offset = shift_right(time_offset * NTP_INTERVAL_FREQ,
+                                          NTP_SCALE_SHIFT);
+                if (!(time_status & STA_NANO))
+                        txc->offset /= NSEC_PER_USEC;
+        }
+        txc->freq          = shift_right((s32)(time_freq >> PPM_SCALE_INV_SHIFT) *
+                                         (s64)PPM_SCALE_INV,
+                                         NTP_SCALE_SHIFT);
         txc->maxerror      = time_maxerror;
         txc->esterror      = time_esterror;
         txc->status        = time_status;
         txc->constant      = time_constant;
         txc->precision     = 1;
-        txc->tolerance     = MAXFREQ;
+        txc->tolerance     = MAXFREQ_SCALED / PPM_SCALE;
         txc->tick          = tick_usec;
+        txc->tai           = time_tai;
 
         /* PPS is not implemented, so these are zero */
         txc->ppsfreq       = 0;
@@ -399,9 +424,15 @@ leave:	if ((time_status & (STA_UNSYNC|STA_CLOCKERR)) != 0)
         txc->errcnt        = 0;
         txc->stbcnt        = 0;
         write_sequnlock_irq(&xtime_lock);
-        do_gettimeofday(&txc->time);
+
+        txc->time.tv_sec = ts.tv_sec;
+        txc->time.tv_usec = ts.tv_nsec;
+        if (!(time_status & STA_NANO))
+                txc->time.tv_usec /= NSEC_PER_USEC;
+
         notify_cmos_timer();
-        return(result);
+
+        return result;
 }
 
 static int __init ntp_tick_adj_setup(char *str)
@@ -411,3 +442,10 @@ static int __init ntp_tick_adj_setup(char *str)
 }
 
 __setup("ntp_tick_adj=", ntp_tick_adj_setup);
+
+void __init ntp_init(void)
+{
+        ntp_clear();
+        hrtimer_init(&leap_timer, CLOCK_REALTIME, HRTIMER_MODE_ABS);
+        leap_timer.function = ntp_leap_second;
+}
diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index 2d6087c7cf98..e91c29f961c9 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -53,7 +53,7 @@ void update_xtime_cache(u64 nsec)
         timespec_add_ns(&xtime_cache, nsec);
 }
 
-static struct clocksource *clock; /* pointer to current clocksource */
+struct clocksource *clock;
 
 
 #ifdef CONFIG_GENERIC_TIME
@@ -246,7 +246,7 @@ void __init timekeeping_init(void)
 
         write_seqlock_irqsave(&xtime_lock, flags);
 
-        ntp_clear();
+        ntp_init();
 
         clock = clocksource_get_next();
         clocksource_calculate_interval(clock, NTP_INTERVAL_LENGTH);
@@ -371,7 +371,7 @@ static __always_inline int clocksource_bigadjust(s64 error, s64 *interval,
          * here.  This is tuned so that an error of about 1 msec is adjusted
          * within about 1 sec (or 2^20 nsec in 2^SHIFT_HZ ticks).
          */
-        error2 = clock->error >> (TICK_LENGTH_SHIFT + 22 - 2 * SHIFT_HZ);
+        error2 = clock->error >> (NTP_SCALE_SHIFT + 22 - 2 * SHIFT_HZ);
         error2 = abs(error2);
         for (look_ahead = 0; error2 > 0; look_ahead++)
                 error2 >>= 2;
@@ -380,8 +380,7 @@ static __always_inline int clocksource_bigadjust(s64 error, s64 *interval,
          * Now calculate the error in (1 << look_ahead) ticks, but first
          * remove the single look ahead already included in the error.
          */
-        tick_error = current_tick_length() >>
-                (TICK_LENGTH_SHIFT - clock->shift + 1);
+        tick_error = tick_length >> (NTP_SCALE_SHIFT - clock->shift + 1);
         tick_error -= clock->xtime_interval >> 1;
         error = ((error - tick_error) >> look_ahead) + tick_error;
 
@@ -412,7 +411,7 @@ static void clocksource_adjust(s64 offset)
         s64 error, interval = clock->cycle_interval;
         int adj;
 
-        error = clock->error >> (TICK_LENGTH_SHIFT - clock->shift - 1);
+        error = clock->error >> (NTP_SCALE_SHIFT - clock->shift - 1);
         if (error > interval) {
                 error >>= 2;
                 if (likely(error <= interval))
@@ -434,7 +433,7 @@ static void clocksource_adjust(s64 offset)
         clock->xtime_interval += interval;
         clock->xtime_nsec -= offset;
         clock->error -= (interval - offset) <<
-                        (TICK_LENGTH_SHIFT - clock->shift);
+                        (NTP_SCALE_SHIFT - clock->shift);
 }
 
 /**
@@ -473,8 +472,8 @@ void update_wall_time(void)
                 }
 
                 /* accumulate error between NTP and clock interval */
-                clock->error += current_tick_length();
-                clock->error -= clock->xtime_interval << (TICK_LENGTH_SHIFT - clock->shift);
+                clock->error += tick_length;
+                clock->error -= clock->xtime_interval << (NTP_SCALE_SHIFT - clock->shift);
         }
 
         /* correct the clock when NTP error is too big */
diff --git a/kernel/timeconst.pl b/kernel/timeconst.pl
index 41468035473c..eb51d76e058a 100644
--- a/kernel/timeconst.pl
+++ b/kernel/timeconst.pl
@@ -1,7 +1,7 @@
 #!/usr/bin/perl
 # -----------------------------------------------------------------------
 #
-#   Copyright 2007 rPath, Inc. - All Rights Reserved
+#   Copyright 2007-2008 rPath, Inc. - All Rights Reserved
 #
 #   This file is part of the Linux kernel, and is made available under
 #   the terms of the GNU General Public License version 2 or (at your
@@ -20,198 +20,138 @@
 %canned_values = (
         24 => [
                 '0xa6aaaaab','0x2aaaaaa',26,
-                '0xa6aaaaaaaaaaaaab','0x2aaaaaaaaaaaaaa',58,
                 125,3,
                 '0xc49ba5e4','0x1fbe76c8b4',37,
-                '0xc49ba5e353f7ceda','0x1fbe76c8b439581062',69,
                 3,125,
                 '0xa2c2aaab','0xaaaa',16,
-                '0xa2c2aaaaaaaaaaab','0xaaaaaaaaaaaa',48,
                 125000,3,
                 '0xc9539b89','0x7fffbce4217d',47,
-                '0xc9539b8887229e91','0x7fffbce4217d2849cb25',79,
                 3,125000,
         ], 32 => [
                 '0xfa000000','0x6000000',27,
-                '0xfa00000000000000','0x600000000000000',59,
                 125,4,
                 '0x83126e98','0xfdf3b645a',36,
-                '0x83126e978d4fdf3c','0xfdf3b645a1cac0831',68,
                 4,125,
                 '0xf4240000','0x0',17,
-                '0xf424000000000000','0x0',49,
                 31250,1,
                 '0x8637bd06','0x3fff79c842fa',46,
-                '0x8637bd05af6c69b6','0x3fff79c842fa5093964a',78,
                 1,31250,
         ], 48 => [
                 '0xa6aaaaab','0x6aaaaaa',27,
-                '0xa6aaaaaaaaaaaaab','0x6aaaaaaaaaaaaaa',59,
                 125,6,
                 '0xc49ba5e4','0xfdf3b645a',36,
-                '0xc49ba5e353f7ceda','0xfdf3b645a1cac0831',68,
                 6,125,
                 '0xa2c2aaab','0x15555',17,
-                '0xa2c2aaaaaaaaaaab','0x1555555555555',49,
                 62500,3,
                 '0xc9539b89','0x3fffbce4217d',46,
-                '0xc9539b8887229e91','0x3fffbce4217d2849cb25',78,
                 3,62500,
         ], 64 => [
                 '0xfa000000','0xe000000',28,
-                '0xfa00000000000000','0xe00000000000000',60,
                 125,8,
                 '0x83126e98','0x7ef9db22d',35,
-                '0x83126e978d4fdf3c','0x7ef9db22d0e560418',67,
                 8,125,
                 '0xf4240000','0x0',18,
-                '0xf424000000000000','0x0',50,
                 15625,1,
                 '0x8637bd06','0x1fff79c842fa',45,
-                '0x8637bd05af6c69b6','0x1fff79c842fa5093964a',77,
                 1,15625,
         ], 100 => [
                 '0xa0000000','0x0',28,
-                '0xa000000000000000','0x0',60,
                 10,1,
                 '0xcccccccd','0x733333333',35,
-                '0xcccccccccccccccd','0x73333333333333333',67,
                 1,10,
                 '0x9c400000','0x0',18,
-                '0x9c40000000000000','0x0',50,
                 10000,1,
                 '0xd1b71759','0x1fff2e48e8a7',45,
-                '0xd1b71758e219652c','0x1fff2e48e8a71de69ad4',77,
                 1,10000,
         ], 122 => [
                 '0x8325c53f','0xfbcda3a',28,
-                '0x8325c53ef368eb05','0xfbcda3ac10c9714',60,
                 500,61,
                 '0xf9db22d1','0x7fbe76c8b',35,
-                '0xf9db22d0e560418a','0x7fbe76c8b43958106',67,
                 61,500,
                 '0x8012e2a0','0x3ef36',18,
-                '0x8012e29f79b47583','0x3ef368eb04325',50,
                 500000,61,
                 '0xffda4053','0x1ffffbce4217',45,
-                '0xffda4052d666a983','0x1ffffbce4217d2849cb2',77,
                 61,500000,
         ], 128 => [
                 '0xfa000000','0x1e000000',29,
-                '0xfa00000000000000','0x1e00000000000000',61,
                 125,16,
                 '0x83126e98','0x3f7ced916',34,
-                '0x83126e978d4fdf3c','0x3f7ced916872b020c',66,
                 16,125,
                 '0xf4240000','0x40000',19,
-                '0xf424000000000000','0x4000000000000',51,
                 15625,2,
                 '0x8637bd06','0xfffbce4217d',44,
-                '0x8637bd05af6c69b6','0xfffbce4217d2849cb25',76,
                 2,15625,
         ], 200 => [
                 '0xa0000000','0x0',29,
-                '0xa000000000000000','0x0',61,
                 5,1,
                 '0xcccccccd','0x333333333',34,
-                '0xcccccccccccccccd','0x33333333333333333',66,
                 1,5,
                 '0x9c400000','0x0',19,
-                '0x9c40000000000000','0x0',51,
                 5000,1,
                 '0xd1b71759','0xfff2e48e8a7',44,
-                '0xd1b71758e219652c','0xfff2e48e8a71de69ad4',76,
                 1,5000,
         ], 250 => [
                 '0x80000000','0x0',29,
-                '0x8000000000000000','0x0',61,
                 4,1,
                 '0x80000000','0x180000000',33,
-                '0x8000000000000000','0x18000000000000000',65,
                 1,4,
                 '0xfa000000','0x0',20,
-                '0xfa00000000000000','0x0',52,
                 4000,1,
                 '0x83126e98','0x7ff7ced9168',43,
-                '0x83126e978d4fdf3c','0x7ff7ced916872b020c4',75,
                 1,4000,
         ], 256 => [
                 '0xfa000000','0x3e000000',30,
-                '0xfa00000000000000','0x3e00000000000000',62,
                 125,32,
                 '0x83126e98','0x1fbe76c8b',33,
-                '0x83126e978d4fdf3c','0x1fbe76c8b43958106',65,
                 32,125,
                 '0xf4240000','0xc0000',20,
-                '0xf424000000000000','0xc000000000000',52,
                 15625,4,
                 '0x8637bd06','0x7ffde7210be',43,
-                '0x8637bd05af6c69b6','0x7ffde7210be9424e592',75,
                 4,15625,
         ], 300 => [
                 '0xd5555556','0x2aaaaaaa',30,
-                '0xd555555555555556','0x2aaaaaaaaaaaaaaa',62,
                 10,3,
                 '0x9999999a','0x1cccccccc',33,
-                '0x999999999999999a','0x1cccccccccccccccc',65,
                 3,10,
                 '0xd0555556','0xaaaaa',20,
-                '0xd055555555555556','0xaaaaaaaaaaaaa',52,
                 10000,3,
                 '0x9d495183','0x7ffcb923a29',43,
-                '0x9d495182a9930be1','0x7ffcb923a29c779a6b5',75,
                 3,10000,
         ], 512 => [
                 '0xfa000000','0x7e000000',31,
-                '0xfa00000000000000','0x7e00000000000000',63,
                 125,64,
                 '0x83126e98','0xfdf3b645',32,
-                '0x83126e978d4fdf3c','0xfdf3b645a1cac083',64,
                 64,125,
                 '0xf4240000','0x1c0000',21,
-                '0xf424000000000000','0x1c000000000000',53,
                 15625,8,
                 '0x8637bd06','0x3ffef39085f',42,
-                '0x8637bd05af6c69b6','0x3ffef39085f4a1272c9',74,
                 8,15625,
         ], 1000 => [
                 '0x80000000','0x0',31,
-                '0x8000000000000000','0x0',63,
                 1,1,
                 '0x80000000','0x0',31,
-                '0x8000000000000000','0x0',63,
                 1,1,
                 '0xfa000000','0x0',22,
-                '0xfa00000000000000','0x0',54,
                 1000,1,
                 '0x83126e98','0x1ff7ced9168',41,
-                '0x83126e978d4fdf3c','0x1ff7ced916872b020c4',73,
                 1,1000,
         ], 1024 => [
                 '0xfa000000','0xfe000000',32,
-                '0xfa00000000000000','0xfe00000000000000',64,
                 125,128,
                 '0x83126e98','0x7ef9db22',31,
-                '0x83126e978d4fdf3c','0x7ef9db22d0e56041',63,
                 128,125,
                 '0xf4240000','0x3c0000',22,
-                '0xf424000000000000','0x3c000000000000',54,
                 15625,16,
                 '0x8637bd06','0x1fff79c842f',41,
-                '0x8637bd05af6c69b6','0x1fff79c842fa5093964',73,
                 16,15625,
         ], 1200 => [
                 '0xd5555556','0xd5555555',32,
-                '0xd555555555555556','0xd555555555555555',64,
                 5,6,
                 '0x9999999a','0x66666666',31,
-                '0x999999999999999a','0x6666666666666666',63,
                 6,5,
                 '0xd0555556','0x2aaaaa',22,
-                '0xd055555555555556','0x2aaaaaaaaaaaaa',54,
                 2500,3,
                 '0x9d495183','0x1ffcb923a29',41,
-                '0x9d495182a9930be1','0x1ffcb923a29c779a6b5',73,
                 3,2500,
         ]
 );
@@ -264,6 +204,15 @@ sub fmuls($$$) {
         return 0;
 }
 
+# Generate a hex value if the result fits in 64 bits;
+# otherwise skip.
+sub bignum_hex($) {
+        my($x) = @_;
+        my $s = $x->as_hex();
+
+        return (length($s) > 18) ? undef : $s;
+}
+
 # Provides mul, adj, and shr factors for a specific
 # (bit, time, hz) combination
 sub muladj($$$) {
@@ -271,7 +220,7 @@ sub muladj($$$) {
         my $s = fmuls($b, $t, $hz);
         my $m = fmul($s, $t, $hz);
         my $a = fadj($s, $t, $hz);
-        return ($m->as_hex(), $a->as_hex(), $s);
+        return (bignum_hex($m), bignum_hex($a), $s);
 }
 
 # Provides numerator, denominator values
@@ -288,12 +237,10 @@ sub conversions($$) {
 
         # HZ_TO_xx
         push(@val, muladj(32, $t, $hz));
-        push(@val, muladj(64, $t, $hz));
         push(@val, numden($t, $hz));
 
         # xx_TO_HZ
         push(@val, muladj(32, $hz, $t));
-        push(@val, muladj(64, $hz, $t));
         push(@val, numden($hz, $t));
 
         return @val;
@@ -318,6 +265,19 @@ sub compute_values($) {
         return @val;
 }
 
+sub outputval($$)
+{
+        my($name, $val) = @_;
+        my $csuf;
+
+        if (defined($val)) {
+            if ($name !~ /SHR/) {
+                $val = "U64_C($val)";
+            }
+            printf "#define %-23s %s\n", $name.$csuf, $val.$csuf;
+        }
+}
+
 sub output($@)
 {
         my($hz, @val) = @_;
@@ -331,6 +291,7 @@ sub output($@)
         print "\n";
 
         print "#include <linux/param.h>\n";
+        print "#include <linux/types.h>\n";
 
         print "\n";
         print "#if HZ != $hz\n";
@@ -340,15 +301,13 @@ sub output($@)
 
         foreach $pfx ('HZ_TO_MSEC','MSEC_TO_HZ',
                       'HZ_TO_USEC','USEC_TO_HZ') {
-                foreach $bit (32, 64) {
+                foreach $bit (32) {
                         foreach $suf ('MUL', 'ADJ', 'SHR') {
-                                printf "#define %-23s %s\n",
-                                        "${pfx}_$suf$bit", shift(@val);
+                                outputval("${pfx}_$suf$bit", shift(@val));
                         }
                 }
                 foreach $suf ('NUM', 'DEN') {
-                        printf "#define %-23s %s\n",
-                                "${pfx}_$suf", shift(@val);
+                        outputval("${pfx}_$suf", shift(@val));
                 }
         }
 
@@ -356,6 +315,23 @@ sub output($@)
         print "#endif /* KERNEL_TIMECONST_H */\n";
 }
 
+# Pretty-print Perl values
+sub perlvals(@) {
+        my $v;
+        my @l = ();
+
+        foreach $v (@_) {
+                if (!defined($v)) {
+                        push(@l, 'undef');
+                } elsif ($v =~ /^0x/) {
+                        push(@l, "\'".$v."\'");
+                } else {
+                        push(@l, $v.'');
+                }
+        }
+        return join(',', @l);
+}
+
 ($hz) = @ARGV;
 
 # Use this to generate the %canned_values structure
@@ -373,15 +349,15 @@ if ($hz eq '--can') {
                 print "$pf$hz => [\n";
                 while (scalar(@values)) {
                         my $bit;
-                        foreach $bit (32, 64) {
+                        foreach $bit (32) {
                                 my $m = shift(@values);
                                 my $a = shift(@values);
                                 my $s = shift(@values);
-                                print "\t\t\'",$m,"\',\'",$a,"\',",$s,",\n";
+                                print "\t\t", perlvals($m,$a,$s), ",\n";
                         }
                         my $n = shift(@values);
                         my $d = shift(@values);
-                        print "\t\t",$n,',',$d,",\n";
+                        print "\t\t", perlvals($n,$d), ",\n";
                 }
                 print "\t]";
                 $pf = ', ';
diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index 721093a22561..29fc39f1029c 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -195,7 +195,6 @@ static void delayed_work_timer_fn(unsigned long __data)
 int queue_delayed_work(struct workqueue_struct *wq,
                         struct delayed_work *dwork, unsigned long delay)
 {
-        timer_stats_timer_set_start_info(&dwork->timer);
         if (delay == 0)
                 return queue_work(wq, &dwork->work);
 
@@ -219,11 +218,12 @@ int queue_delayed_work_on(int cpu, struct workqueue_struct *wq,
         struct timer_list *timer = &dwork->timer;
         struct work_struct *work = &dwork->work;
 
-        timer_stats_timer_set_start_info(&dwork->timer);
         if (!test_and_set_bit(WORK_STRUCT_PENDING, work_data_bits(work))) {
                 BUG_ON(timer_pending(timer));
                 BUG_ON(!list_empty(&work->entry));
 
+                timer_stats_timer_set_start_info(&dwork->timer);
+
                 /* This stores cwq for the moment, for the timer_fn */
                 set_wq_data(work, wq_per_cpu(wq, raw_smp_processor_id()));
                 timer->expires = jiffies + delay;
@@ -564,7 +564,6 @@ EXPORT_SYMBOL(schedule_work);
 int schedule_delayed_work(struct delayed_work *dwork,
                                         unsigned long delay)
 {
-        timer_stats_timer_set_start_info(&dwork->timer);
         return queue_delayed_work(keventd_wq, dwork, delay);
 }
 EXPORT_SYMBOL(schedule_delayed_work);
@@ -581,7 +580,6 @@ EXPORT_SYMBOL(schedule_delayed_work);
 int schedule_delayed_work_on(int cpu,
                         struct delayed_work *dwork, unsigned long delay)
 {
-        timer_stats_timer_set_start_info(&dwork->timer);
         return queue_delayed_work_on(cpu, keventd_wq, dwork, delay);
 }
 EXPORT_SYMBOL(schedule_delayed_work_on);
diff --git a/lib/Kconfig.kgdb b/lib/Kconfig.kgdb
index f2e01ac5ab09..a5d4b1dac2a5 100644
--- a/lib/Kconfig.kgdb
+++ b/lib/Kconfig.kgdb
@@ -1,4 +1,10 @@
 
+config HAVE_ARCH_KGDB_SHADOW_INFO
+        bool
+
+config HAVE_ARCH_KGDB
+        bool
+
 menuconfig KGDB
         bool "KGDB: kernel debugging with remote gdb"
         select FRAME_POINTER
@@ -10,15 +16,10 @@ menuconfig KGDB
           at http://kgdb.sourceforge.net as well as in DocBook form
           in Documentation/DocBook/.  If unsure, say N.
 
-config HAVE_ARCH_KGDB_SHADOW_INFO
-        bool
-
-config HAVE_ARCH_KGDB
-        bool
+if KGDB
 
 config KGDB_SERIAL_CONSOLE
         tristate "KGDB: use kgdb over the serial console"
-        depends on KGDB
         select CONSOLE_POLL
         select MAGIC_SYSRQ
         default y
@@ -28,7 +29,6 @@ config KGDB_SERIAL_CONSOLE
 
 config KGDB_TESTS
         bool "KGDB: internal test suite"
-        depends on KGDB
         default n
         help
           This is a kgdb I/O module specifically designed to test
@@ -56,3 +56,5 @@ config KGDB_TESTS_BOOT_STRING
           boot.  See the drivers/misc/kgdbts.c for detailed
           information about other strings you could use beyond the
           default of V1F100.
+
+endif # KGDB
diff --git a/lib/devres.c b/lib/devres.c
index 26c87c49d776..72c8909006da 100644
--- a/lib/devres.c
+++ b/lib/devres.c
@@ -2,7 +2,7 @@
 #include <linux/io.h>
 #include <linux/module.h>
 
-static void devm_ioremap_release(struct device *dev, void *res)
+void devm_ioremap_release(struct device *dev, void *res)
 {
         iounmap(*(void __iomem **)res);
 }
diff --git a/lib/div64.c b/lib/div64.c
index b71cf93c529a..bb5bd0c0f030 100644
--- a/lib/div64.c
+++ b/lib/div64.c
@@ -16,9 +16,8 @@
  * assembly versions such as arch/ppc/lib/div64.S and arch/sh/lib/div64.S.
  */
 
-#include <linux/types.h>
 #include <linux/module.h>
-#include <asm/div64.h>
+#include <linux/math64.h>
 
 /* Not needed on 64bit architectures */
 #if BITS_PER_LONG == 32
@@ -58,10 +57,31 @@ uint32_t __attribute__((weak)) __div64_32(uint64_t *n, uint32_t base)
 
 EXPORT_SYMBOL(__div64_32);
 
+#ifndef div_s64_rem
+s64 div_s64_rem(s64 dividend, s32 divisor, s32 *remainder)
+{
+        u64 quotient;
+
+        if (dividend < 0) {
+                quotient = div_u64_rem(-dividend, abs(divisor), (u32 *)remainder);
+                *remainder = -*remainder;
+                if (divisor > 0)
+                        quotient = -quotient;
+        } else {
+                quotient = div_u64_rem(dividend, abs(divisor), (u32 *)remainder);
+                if (divisor < 0)
+                        quotient = -quotient;
+        }
+        return quotient;
+}
+EXPORT_SYMBOL(div_s64_rem);
+#endif
+
 /* 64bit divisor, dividend and result. dynamic precision */
-uint64_t div64_64(uint64_t dividend, uint64_t divisor)
+#ifndef div64_u64
+u64 div64_u64(u64 dividend, u64 divisor)
 {
-        uint32_t high, d;
+        u32 high, d;
 
         high = divisor >> 32;
         if (high) {
@@ -72,10 +92,9 @@ uint64_t div64_64(uint64_t dividend, uint64_t divisor)
         } else
                 d = divisor;
 
-        do_div(dividend, d);
-
-        return dividend;
+        return div_u64(dividend, d);
 }
-EXPORT_SYMBOL(div64_64);
+EXPORT_SYMBOL(div64_u64);
+#endif
 
 #endif /* BITS_PER_LONG == 32 */
diff --git a/lib/idr.c b/lib/idr.c
index 8368c81fcb7d..7a02e173f027 100644
--- a/lib/idr.c
+++ b/lib/idr.c
@@ -385,8 +385,8 @@ void idr_remove(struct idr *idp, int id)
         while (idp->id_free_cnt >= IDR_FREE_MAX) {
                 p = alloc_layer(idp);
                 kmem_cache_free(idr_layer_cache, p);
-                return;
         }
+        return;
 }
 EXPORT_SYMBOL(idr_remove);
 
diff --git a/lib/string.c b/lib/string.c
index 5efafed3d6b6..b19b87af65a3 100644
--- a/lib/string.c
+++ b/lib/string.c
@@ -493,6 +493,33 @@ char *strsep(char **s, const char *ct)
 EXPORT_SYMBOL(strsep);
 #endif
 
+/**
+ * sysfs_streq - return true if strings are equal, modulo trailing newline
+ * @s1: one string
+ * @s2: another string
+ *
+ * This routine returns true iff two strings are equal, treating both
+ * NUL and newline-then-NUL as equivalent string terminations.  It's
+ * geared for use with sysfs input strings, which generally terminate
+ * with newlines but are compared against values without newlines.
+ */
+bool sysfs_streq(const char *s1, const char *s2)
+{
+        while (*s1 && *s1 == *s2) {
+                s1++;
+                s2++;
+        }
+
+        if (*s1 == *s2)
+                return true;
+        if (!*s1 && *s2 == '\n' && !s2[1])
+                return true;
+        if (*s1 == '\n' && !s1[1] && !*s2)
+                return true;
+        return false;
+}
+EXPORT_SYMBOL(sysfs_streq);
+
 #ifndef __HAVE_ARCH_MEMSET
 /**
  * memset - Fill a region of memory with the given value
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index 33add96cd5fb..e46451e1d9b7 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -48,6 +48,8 @@ enum mem_cgroup_stat_index {
          */
         MEM_CGROUP_STAT_CACHE,     /* # of pages charged as cache */
         MEM_CGROUP_STAT_RSS,       /* # of pages charged as rss */
+        MEM_CGROUP_STAT_PGPGIN_COUNT,   /* # of pages paged in */
+        MEM_CGROUP_STAT_PGPGOUT_COUNT,  /* # of pages paged out */
 
         MEM_CGROUP_STAT_NSTATS,
 };
@@ -199,6 +201,13 @@ static void mem_cgroup_charge_statistics(struct mem_cgroup *mem, int flags,
                 __mem_cgroup_stat_add_safe(stat, MEM_CGROUP_STAT_CACHE, val);
         else
                 __mem_cgroup_stat_add_safe(stat, MEM_CGROUP_STAT_RSS, val);
+
+        if (charge)
+                __mem_cgroup_stat_add_safe(stat,
+                                MEM_CGROUP_STAT_PGPGIN_COUNT, 1);
+        else
+                __mem_cgroup_stat_add_safe(stat,
+                                MEM_CGROUP_STAT_PGPGOUT_COUNT, 1);
 }
 
 static struct mem_cgroup_per_zone *
@@ -884,6 +893,8 @@ static const struct mem_cgroup_stat_desc {
 } mem_cgroup_stat_desc[] = {
         [MEM_CGROUP_STAT_CACHE] = { "cache", PAGE_SIZE, },
         [MEM_CGROUP_STAT_RSS] = { "rss", PAGE_SIZE, },
+        [MEM_CGROUP_STAT_PGPGIN_COUNT] = {"pgpgin", 1, },
+        [MEM_CGROUP_STAT_PGPGOUT_COUNT] = {"pgpgout", 1, },
 };
 
 static int mem_control_stat_show(struct cgroup *cont, struct cftype *cft,
diff --git a/mm/slub.c b/mm/slub.c
index 70db2897c1ea..d379b782fc83 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -22,6 +22,7 @@
 #include <linux/debugobjects.h>
 #include <linux/kallsyms.h>
 #include <linux/memory.h>
+#include <linux/math64.h>
 
 /*
  * Lock order:
@@ -216,7 +217,7 @@ struct track {
 
 enum track_item { TRACK_ALLOC, TRACK_FREE };
 
-#if defined(CONFIG_SYSFS) && defined(CONFIG_SLUB_DEBUG)
+#ifdef CONFIG_SLUB_DEBUG
 static int sysfs_slab_add(struct kmem_cache *);
 static int sysfs_slab_alias(struct kmem_cache *, const char *);
 static void sysfs_slab_remove(struct kmem_cache *);
@@ -813,7 +814,8 @@ static int on_freelist(struct kmem_cache *s, struct page *page, void *search)
         return search == NULL;
 }
 
-static void trace(struct kmem_cache *s, struct page *page, void *object, int alloc)
+static void trace(struct kmem_cache *s, struct page *page, void *object,
+                                                                int alloc)
 {
         if (s->flags & SLAB_TRACE) {
                 printk(KERN_INFO "TRACE %s %s 0x%p inuse=%d fp=0x%p\n",
@@ -1266,8 +1268,7 @@ static void add_partial(struct kmem_cache_node *n,
         spin_unlock(&n->list_lock);
 }
 
-static void remove_partial(struct kmem_cache *s,
-                                                struct page *page)
+static void remove_partial(struct kmem_cache *s, struct page *page)
 {
         struct kmem_cache_node *n = get_node(s, page_to_nid(page));
 
@@ -1282,7 +1283,8 @@ static void remove_partial(struct kmem_cache *s,
  *
  * Must hold list_lock.
  */
-static inline int lock_and_freeze_slab(struct kmem_cache_node *n, struct page *page)
+static inline int lock_and_freeze_slab(struct kmem_cache_node *n,
+                                                        struct page *page)
 {
         if (slab_trylock(page)) {
                 list_del(&page->lru);
@@ -1419,8 +1421,8 @@ static void unfreeze_slab(struct kmem_cache *s, struct page *page, int tail)
                          * so that the others get filled first. That way the
                          * size of the partial list stays small.
                          *
-                         * kmem_cache_shrink can reclaim any empty slabs from the
-                         * partial list.
+                         * kmem_cache_shrink can reclaim any empty slabs from
+                         * the partial list.
                          */
                         add_partial(n, page, 1);
                         slab_unlock(page);
@@ -2908,7 +2910,7 @@ static int slab_mem_going_online_callback(void *arg)
                 return 0;
 
         /*
-         * We are bringing a node online. No memory is availabe yet. We must
+         * We are bringing a node online. No memory is available yet. We must
          * allocate a kmem_cache_node structure in order to bring the node
          * online.
          */
@@ -3245,7 +3247,7 @@ void *__kmalloc_node_track_caller(size_t size, gfp_t gfpflags,
         return slab_alloc(s, gfpflags, node, caller);
 }
 
-#if (defined(CONFIG_SYSFS) && defined(CONFIG_SLUB_DEBUG)) || defined(CONFIG_SLABINFO)
+#ifdef CONFIG_SLUB_DEBUG
 static unsigned long count_partial(struct kmem_cache_node *n,
                                         int (*get_count)(struct page *))
 {
@@ -3274,9 +3276,7 @@ static int count_free(struct page *page)
 {
         return page->objects - page->inuse;
 }
-#endif
 
-#if defined(CONFIG_SYSFS) && defined(CONFIG_SLUB_DEBUG)
 static int validate_slab(struct kmem_cache *s, struct page *page,
                                                 unsigned long *map)
 {
@@ -3621,12 +3621,10 @@ static int list_locations(struct kmem_cache *s, char *buf,
                         len += sprintf(buf + len, "<not-available>");
 
                 if (l->sum_time != l->min_time) {
-                        unsigned long remainder;
-
                         len += sprintf(buf + len, " age=%ld/%ld/%ld",
-                        l->min_time,
-                        div_long_long_rem(l->sum_time, l->count, &remainder),
-                        l->max_time);
+                                l->min_time,
+                                (long)div_u64(l->sum_time, l->count),
+                                l->max_time);
                 } else
                         len += sprintf(buf + len, " age=%ld",
                                 l->min_time);
@@ -3813,7 +3811,12 @@ SLAB_ATTR_RO(objs_per_slab);
 static ssize_t order_store(struct kmem_cache *s,
                                 const char *buf, size_t length)
 {
-        int order = simple_strtoul(buf, NULL, 10);
+        unsigned long order;
+        int err;
+
+        err = strict_strtoul(buf, 10, &order);
+        if (err)
+                return err;
 
         if (order > slub_max_order || order < slub_min_order)
                 return -EINVAL;
@@ -4066,10 +4069,16 @@ static ssize_t remote_node_defrag_ratio_show(struct kmem_cache *s, char *buf)
 static ssize_t remote_node_defrag_ratio_store(struct kmem_cache *s,
                                 const char *buf, size_t length)
 {
-        int n = simple_strtoul(buf, NULL, 10);
+        unsigned long ratio;
+        int err;
+
+        err = strict_strtoul(buf, 10, &ratio);
+        if (err)
+                return err;
+
+        if (ratio < 100)
+                s->remote_node_defrag_ratio = ratio * 10;
 
-        if (n < 100)
-                s->remote_node_defrag_ratio = n * 10;
         return length;
 }
 SLAB_ATTR(remote_node_defrag_ratio);
@@ -4426,8 +4435,8 @@ __initcall(slab_sysfs_init);
  */
 #ifdef CONFIG_SLABINFO
 
-ssize_t slabinfo_write(struct file *file, const char __user * buffer,
-                       size_t count, loff_t *ppos)
+ssize_t slabinfo_write(struct file *file, const char __user *buffer,
+                       size_t count, loff_t *ppos)
 {
         return -EINVAL;
 }
diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index 2a39cf128aba..6e45b0f3d125 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -547,6 +547,7 @@ void *__vmalloc_area(struct vm_struct *area, gfp_t gfp_mask, pgprot_t prot)
  *      @gfp_mask:      flags for the page level allocator
  *      @prot:          protection mask for the allocated pages
  *      @node:          node to use for allocation or -1
+ *      @caller:        caller's return address
  *
  *      Allocate enough pages to cover @size from the page level
  *      allocator with @gfp_mask flags.  Map them into contiguous
diff --git a/net/can/bcm.c b/net/can/bcm.c
index 74fd2d33aff4..d9a3a9d13bed 100644
--- a/net/can/bcm.c
+++ b/net/can/bcm.c
@@ -412,12 +412,6 @@ static void bcm_rx_changed(struct bcm_op *op, struct can_frame *data)
         bcm_send_to_user(op, &head, data, 1);
 }
 
-/* TODO: move to linux/hrtimer.h */
-static inline int hrtimer_callback_running(struct hrtimer *timer)
-{
-        return timer->state & HRTIMER_STATE_CALLBACK;
-}
-
 /*
  * bcm_rx_update_and_send - process a detected relevant receive content change
  *                          1. update the last received data
diff --git a/net/ipv4/tcp_cubic.c b/net/ipv4/tcp_cubic.c
index eb5b9854c8c7..4a1221e5e8ee 100644
--- a/net/ipv4/tcp_cubic.c
+++ b/net/ipv4/tcp_cubic.c
@@ -15,8 +15,8 @@
 
 #include <linux/mm.h>
 #include <linux/module.h>
+#include <linux/math64.h>
 #include <net/tcp.h>
-#include <asm/div64.h>
 
 #define BICTCP_BETA_SCALE    1024       /* Scale factor beta calculation
                                          * max_cwnd = snd_cwnd * beta
@@ -128,7 +128,7 @@ static u32 cubic_root(u64 a)
          * x    = ( 2 * x  +  a / x  ) / 3
          *  k+1          k         k
          */
-        x = (2 * x + (u32)div64_64(a, (u64)x * (u64)(x - 1)));
+        x = (2 * x + (u32)div64_u64(a, (u64)x * (u64)(x - 1)));
         x = ((x * 341) >> 10);
         return x;
 }
diff --git a/net/netfilter/xt_connbytes.c b/net/netfilter/xt_connbytes.c
index b15e7e2fa143..d7e8983cd37f 100644
--- a/net/netfilter/xt_connbytes.c
+++ b/net/netfilter/xt_connbytes.c
@@ -4,12 +4,11 @@
 #include <linux/module.h>
 #include <linux/bitops.h>
 #include <linux/skbuff.h>
+#include <linux/math64.h>
 #include <linux/netfilter/x_tables.h>
 #include <linux/netfilter/xt_connbytes.h>
 #include <net/netfilter/nf_conntrack.h>
 
-#include <asm/div64.h>
-
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Harald Welte <laforge@netfilter.org>");
 MODULE_DESCRIPTION("Xtables: Number of packets/bytes per connection matching");
@@ -82,7 +81,7 @@ connbytes_mt(const struct sk_buff *skb, const struct net_device *in,
                         break;
                 }
                 if (pkts != 0)
-                        what = div64_64(bytes, pkts);
+                        what = div64_u64(bytes, pkts);
                 break;
         }
 
diff --git a/scripts/kconfig/lkc.h b/scripts/kconfig/lkc.h
index 4bc68f20a73c..96521cb087ec 100644
--- a/scripts/kconfig/lkc.h
+++ b/scripts/kconfig/lkc.h
@@ -11,9 +11,9 @@
 #ifndef KBUILD_NO_NLS
 # include <libintl.h>
 #else
-# define gettext(Msgid) ((const char *) (Msgid))
-# define textdomain(Domainname) ((const char *) (Domainname))
-# define bindtextdomain(Domainname, Dirname) ((const char *) (Dirname))
+static inline const char *gettext(const char *txt) { return txt; }
+static inline void textdomain(const char *domainname) {}
+static inline void bindtextdomain(const char *name, const char *dir) {}
 #endif
 
 #ifdef __cplusplus
diff --git a/scripts/kconfig/lxdialog/check-lxdialog.sh b/scripts/kconfig/lxdialog/check-lxdialog.sh
index 62e1e02126e6..5552154cbedb 100644
--- a/scripts/kconfig/lxdialog/check-lxdialog.sh
+++ b/scripts/kconfig/lxdialog/check-lxdialog.sh
@@ -36,8 +36,10 @@ trap "rm -f $tmp" 0 1 2 3 15
 
 # Check if we can link to ncurses
 check() {
-        echo -e " #include CURSES_LOC \n main() {}" |
-            $cc -xc - -o $tmp 2> /dev/null
+        $cc -xc - -o $tmp 2>/dev/null <<'EOF'
+#include CURSES_LOC
+main() {}
+EOF
         if [ $? != 0 ]; then
             echo " *** Unable to find the ncurses libraries or the"       1>&2
             echo " *** required header files."                            1>&2
diff --git a/scripts/kconfig/mconf.c b/scripts/kconfig/mconf.c
index 734cf4f3131e..6841e95c0989 100644
--- a/scripts/kconfig/mconf.c
+++ b/scripts/kconfig/mconf.c
@@ -773,7 +773,7 @@ static void conf_string(struct menu *menu)
 
         while (1) {
                 int res;
-                char *heading;
+                const char *heading;
 
                 switch (sym_get_type(menu->sym)) {
                 case S_INT:
@@ -925,3 +925,4 @@ int main(int ac, char **av)
 
         return 0;
 }
+
diff --git a/scripts/mod/file2alias.c b/scripts/mod/file2alias.c
index e04c4218cb52..cea4a790e1e9 100644
--- a/scripts/mod/file2alias.c
+++ b/scripts/mod/file2alias.c
@@ -51,6 +51,15 @@ do {                                                            \
                 sprintf(str + strlen(str), "*");                \
 } while(0)
 
+/* Always end in a wildcard, for future extension */
+static inline void add_wildcard(char *str)
+{
+        int len = strlen(str);
+
+        if (str[len - 1] != '*')
+                strcat(str + len, "*");
+}
+
 unsigned int cross_build = 0;
 /**
  * Check that sizeof(device_id type) are consistent with size of section
@@ -133,9 +142,7 @@ static void do_usb_entry(struct usb_device_id *id,
             id->match_flags&USB_DEVICE_ID_MATCH_INT_PROTOCOL,
             id->bInterfaceProtocol);
 
-        /* Always end in a wildcard, for future extension */
-        if (alias[strlen(alias)-1] != '*')
-                strcat(alias, "*");
+        add_wildcard(alias);
         buf_printf(&mod->dev_table_buf,
                    "MODULE_ALIAS(\"%s\");\n", alias);
 }
@@ -219,6 +226,7 @@ static int do_ieee1394_entry(const char *filename,
         ADD(alias, "ver", id->match_flags & IEEE1394_MATCH_VERSION,
             id->version);
 
+        add_wildcard(alias);
         return 1;
 }
 
@@ -261,6 +269,7 @@ static int do_pci_entry(const char *filename,
         ADD(alias, "bc", baseclass_mask == 0xFF, baseclass);
         ADD(alias, "sc", subclass_mask == 0xFF, subclass);
         ADD(alias, "i", interface_mask == 0xFF, interface);
+        add_wildcard(alias);
         return 1;
 }
 
@@ -283,6 +292,7 @@ static int do_ccw_entry(const char *filename,
             id->dev_type);
         ADD(alias, "dm", id->match_flags&CCW_DEVICE_ID_MATCH_DEVICE_MODEL,
             id->dev_model);
+        add_wildcard(alias);
         return 1;
 }
 
@@ -290,7 +300,7 @@ static int do_ccw_entry(const char *filename,
 static int do_ap_entry(const char *filename,
                        struct ap_device_id *id, char *alias)
 {
-        sprintf(alias, "ap:t%02X", id->dev_type);
+        sprintf(alias, "ap:t%02X*", id->dev_type);
         return 1;
 }
 
@@ -309,6 +319,7 @@ static int do_serio_entry(const char *filename,
         ADD(alias, "id", id->id != SERIO_ANY, id->id);
         ADD(alias, "ex", id->extra != SERIO_ANY, id->extra);
 
+        add_wildcard(alias);
         return 1;
 }
 
@@ -316,7 +327,7 @@ static int do_serio_entry(const char *filename,
 static int do_acpi_entry(const char *filename,
                         struct acpi_device_id *id, char *alias)
 {
-        sprintf(alias, "acpi*:%s:", id->id);
+        sprintf(alias, "acpi*:%s:*", id->id);
         return 1;
 }
 
@@ -324,7 +335,7 @@ static int do_acpi_entry(const char *filename,
 static int do_pnp_entry(const char *filename,
                         struct pnp_device_id *id, char *alias)
 {
-        sprintf(alias, "pnp:d%s", id->id);
+        sprintf(alias, "pnp:d%s*", id->id);
         return 1;
 }
 
@@ -409,6 +420,7 @@ static int do_pcmcia_entry(const char *filename,
        ADD(alias, "pc", id->match_flags & PCMCIA_DEV_ID_MATCH_PROD_ID3, id->prod_id_hash[2]);
        ADD(alias, "pd", id->match_flags & PCMCIA_DEV_ID_MATCH_PROD_ID4, id->prod_id_hash[3]);
 
+        add_wildcard(alias);
        return 1;
 }
 
@@ -432,6 +444,7 @@ static int do_of_entry (const char *filename, struct of_device_id *of, char *ali
         if (isspace (*tmp))
             *tmp = '_';
 
+    add_wildcard(alias);
     return 1;
 }
 
@@ -448,6 +461,7 @@ static int do_vio_entry(const char *filename, struct vio_device_id *vio,
                 if (isspace (*tmp))
                         *tmp = '_';
 
+        add_wildcard(alias);
         return 1;
 }
 
@@ -511,6 +525,8 @@ static int do_eisa_entry(const char *filename, struct eisa_device_id *eisa,
 {
         if (eisa->sig[0])
                 sprintf(alias, EISA_DEVICE_MODALIAS_FMT "*", eisa->sig);
+        else
+                strcat(alias, "*");
         return 1;
 }
 
@@ -529,6 +545,7 @@ static int do_parisc_entry(const char *filename, struct parisc_device_id *id,
         ADD(alias, "rev", id->hversion_rev != PA_HVERSION_REV_ANY_ID, id->hversion_rev);
         ADD(alias, "sv", id->sversion != PA_SVERSION_ANY_ID, id->sversion);
 
+        add_wildcard(alias);
         return 1;
 }
 
@@ -544,6 +561,7 @@ static int do_sdio_entry(const char *filename,
         ADD(alias, "c", id->class != (__u8)SDIO_ANY_ID, id->class);
         ADD(alias, "v", id->vendor != (__u16)SDIO_ANY_ID, id->vendor);
         ADD(alias, "d", id->device != (__u16)SDIO_ANY_ID, id->device);
+        add_wildcard(alias);
         return 1;
 }
 
@@ -559,6 +577,7 @@ static int do_ssb_entry(const char *filename,
         ADD(alias, "v", id->vendor != SSB_ANY_VENDOR, id->vendor);
         ADD(alias, "id", id->coreid != SSB_ANY_ID, id->coreid);
         ADD(alias, "rev", id->revision != SSB_ANY_REV, id->revision);
+        add_wildcard(alias);
         return 1;
 }
 
@@ -573,6 +592,7 @@ static int do_virtio_entry(const char *filename, struct virtio_device_id *id,
         ADD(alias, "d", 1, id->device);
         ADD(alias, "v", id->vendor != VIRTIO_DEV_ANY_ID, id->vendor);
 
+        add_wildcard(alias);
         return 1;
 }
 
@@ -612,9 +632,6 @@ static void do_table(void *symval, unsigned long size,
 
         for (i = 0; i < size; i += id_size) {
                 if (do_entry(mod->name, symval+i, alias)) {
-                        /* Always end in a wildcard, for future extension */
-                        if (alias[strlen(alias)-1] != '*')
-                                strcat(alias, "*");
                         buf_printf(&mod->dev_table_buf,
                                    "MODULE_ALIAS(\"%s\");\n", alias);
                 }
diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index 1b50a6ebc55f..1c864c0efe2b 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -39,6 +39,7 @@
 #include <linux/spinlock.h>
 #include <linux/syscalls.h>
 #include <linux/file.h>
+#include <linux/fdtable.h>
 #include <linux/namei.h>
 #include <linux/mount.h>
 #include <linux/ext2_fs.h>
diff --git a/sound/drivers/pcsp/pcsp.c b/sound/drivers/pcsp/pcsp.c
index 59203511e77d..54a1f9036c66 100644
--- a/sound/drivers/pcsp/pcsp.c
+++ b/sound/drivers/pcsp/pcsp.c
@@ -194,6 +194,7 @@ static void pcsp_stop_beep(struct snd_pcsp *chip)
         spin_unlock_irq(&chip->substream_lock);
 }
 
+#ifdef CONFIG_PM
 static int pcsp_suspend(struct platform_device *dev, pm_message_t state)
 {
         struct snd_pcsp *chip = platform_get_drvdata(dev);
@@ -201,6 +202,9 @@ static int pcsp_suspend(struct platform_device *dev, pm_message_t state)
         snd_pcm_suspend_all(chip->pcm);
         return 0;
 }
+#else
+#define pcsp_suspend NULL
+#endif  /* CONFIG_PM */
 
 static void pcsp_shutdown(struct platform_device *dev)
 {
diff --git a/sound/pci/Kconfig b/sound/pci/Kconfig
index 581debf37dcb..7e4742109572 100644
--- a/sound/pci/Kconfig
+++ b/sound/pci/Kconfig
@@ -515,19 +515,16 @@ config SND_FM801
 config SND_FM801_TEA575X_BOOL
         bool "ForteMedia FM801 + TEA5757 tuner"
         depends on SND_FM801
+        depends on VIDEO_V4L1=y || VIDEO_V4L1=SND_FM801
         help
           Say Y here to include support for soundcards based on the ForteMedia
           FM801 chip with a TEA5757 tuner connected to GPIO1-3 pins (Media
           Forte SF256-PCS-02) into the snd-fm801 driver.
 
-          This will enable support for the old V4L1 API.
-
 config SND_FM801_TEA575X
         tristate
         depends on SND_FM801_TEA575X_BOOL
         default SND_FM801
-        select VIDEO_V4L1
-        select VIDEO_DEV
 
 config SND_HDA_INTEL
         tristate "Intel HD Audio"
diff --git a/sound/pci/ac97/ac97_patch.c b/sound/pci/ac97/ac97_patch.c
index 39198e505b12..2da89810ca10 100644
--- a/sound/pci/ac97/ac97_patch.c
+++ b/sound/pci/ac97/ac97_patch.c
@@ -3446,6 +3446,7 @@ static const struct snd_kcontrol_new snd_ac97_controls_vt1617a[] = {
 int patch_vt1617a(struct snd_ac97 * ac97)
 {
         int err = 0;
+        int val;
 
         /* we choose to not fail out at this point, but we tell the
            caller when we return */
@@ -3456,7 +3457,13 @@ int patch_vt1617a(struct snd_ac97 * ac97)
         /* bring analog power consumption to normal by turning off the
          * headphone amplifier, like WinXP driver for EPIA SP
          */
-        snd_ac97_write_cache(ac97, 0x5c, 0x20);
+        /* We need to check the bit before writing it.
+         * On some (many?) hardwares, setting bit actually clears it!
+         */
+        val = snd_ac97_read(ac97, 0x5c);
+        if (!(val & 0x20))
+                snd_ac97_write_cache(ac97, 0x5c, 0x20);
+
         ac97->ext_id |= AC97_EI_SPDIF;  /* force the detection of spdif */
         ac97->rates[AC97_RATES_SPDIF] = SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000;
         ac97->build_ops = &patch_vt1616_ops;
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index d9783a4263e0..6d4df45e81e0 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -11902,7 +11902,10 @@ static void alc861_auto_set_output_and_unmute(struct hda_codec *codec,
                                               hda_nid_t nid,
                                               int pin_type, int dac_idx)
 {
-        alc_set_pin_output(codec, nid, pin_type);
+        snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
+                            pin_type);
+        snd_hda_codec_write(codec, dac_idx, 0, AC_VERB_SET_AMP_GAIN_MUTE,
+                            AMP_OUT_UNMUTE);
 }
 
 static void alc861_auto_init_multi_out(struct hda_codec *codec)
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index b3a15d616873..393f7fd2b1be 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -4289,6 +4289,8 @@ struct hda_codec_preset snd_hda_preset_sigmatel[] = {
         { .id = 0x83847635, .name = "STAC9250D", .patch = patch_stac925x },
         { .id = 0x83847636, .name = "STAC9251", .patch = patch_stac925x },
         { .id = 0x83847637, .name = "STAC9250D", .patch = patch_stac925x },
+        { .id = 0x83847645, .name = "92HD206X", .patch = patch_stac927x },
+        { .id = 0x83847646, .name = "92HD206D", .patch = patch_stac927x },
         /* The following does not take into account .id=0x83847661 when subsys =
          * 104D0C00 which is STAC9225s. Because of this, some SZ Notebooks are
          * currently not fully supported.
diff --git a/sound/soc/s3c24xx/s3c24xx-i2s.c b/sound/soc/s3c24xx/s3c24xx-i2s.c
index 4ebcd6a8bf28..1ed6afd45459 100644
--- a/sound/soc/s3c24xx/s3c24xx-i2s.c
+++ b/sound/soc/s3c24xx/s3c24xx-i2s.c
@@ -224,6 +224,7 @@ static int s3c24xx_i2s_set_fmt(struct snd_soc_cpu_dai *cpu_dai,
                 iismod |= S3C2410_IISMOD_SLAVE;
                 break;
         case SND_SOC_DAIFMT_CBS_CFS:
+                iismod &= ~S3C2410_IISMOD_SLAVE;
                 break;
         default:
                 return -EINVAL;
@@ -234,6 +235,7 @@ static int s3c24xx_i2s_set_fmt(struct snd_soc_cpu_dai *cpu_dai,
                 iismod |= S3C2410_IISMOD_MSB;
                 break;
         case SND_SOC_DAIFMT_I2S:
+                iismod &= ~S3C2410_IISMOD_MSB;
                 break;
         default:
                 return -EINVAL;
diff --git a/sound/soc/s3c24xx/s3c24xx-pcm.c b/sound/soc/s3c24xx/s3c24xx-pcm.c
index 6c70a81c730c..7806ae614617 100644
--- a/sound/soc/s3c24xx/s3c24xx-pcm.c
+++ b/sound/soc/s3c24xx/s3c24xx-pcm.c
@@ -171,7 +171,7 @@ static int s3c24xx_pcm_hw_params(struct snd_pcm_substream *substream,
                 ret = s3c2410_dma_request(prtd->params->channel,
                                           prtd->params->client, NULL);
 
-                if (ret) {
+                if (ret < 0) {
                         DBG(KERN_ERR "failed to get dma channel\n");
                         return ret;
                 }
diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c
index c82cf15730a1..f7ba099049ea 100644
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -522,6 +522,7 @@ unsigned long gfn_to_hva(struct kvm *kvm, gfn_t gfn)
                 return bad_hva();
         return (slot->userspace_addr + (gfn - slot->base_gfn) * PAGE_SIZE);
 }
+EXPORT_SYMBOL_GPL(gfn_to_hva);
 
 /*
  * Requires current->mm->mmap_sem to be held
@@ -834,16 +835,9 @@ static const struct file_operations kvm_vcpu_fops = {
  */
 static int create_vcpu_fd(struct kvm_vcpu *vcpu)
 {
-        int fd, r;
-        struct inode *inode;
-        struct file *file;
-
-        r = anon_inode_getfd(&fd, &inode, &file,
-                             "kvm-vcpu", &kvm_vcpu_fops, vcpu);
-        if (r) {
+        int fd = anon_inode_getfd("kvm-vcpu", &kvm_vcpu_fops, vcpu);
+        if (fd < 0)
                 kvm_put_kvm(vcpu->kvm);
-                return r;
-        }
         return fd;
 }
 
@@ -1168,19 +1162,15 @@ static const struct file_operations kvm_vm_fops = {
 
 static int kvm_dev_ioctl_create_vm(void)
 {
-        int fd, r;
-        struct inode *inode;
-        struct file *file;
+        int fd;
         struct kvm *kvm;
 
         kvm = kvm_create_vm();
         if (IS_ERR(kvm))
                 return PTR_ERR(kvm);
-        r = anon_inode_getfd(&fd, &inode, &file, "kvm-vm", &kvm_vm_fops, kvm);
-        if (r) {
+        fd = anon_inode_getfd("kvm-vm", &kvm_vm_fops, kvm);
+        if (fd < 0)
                 kvm_put_kvm(kvm);
-                return r;
-        }
 
         return fd;
 }