17 files changed, 118 insertions, 51 deletions

diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 47d714d70821..9d3a0775a11d 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -247,3 +247,14 @@ Why:	The interrupt related SA_* flags are replaced by IRQF_* to move them
 Who:    Thomas Gleixner <tglx@linutronix.de>
 
 ---------------------------
+
+What:   i2c-ite and i2c-algo-ite drivers
+When:   September 2006
+Why:    These drivers never compiled since they were added to the kernel
+        tree 5 years ago. This feature removal can be reevaluated if
+        someone shows interest in the drivers, fixes them and takes over
+        maintenance.
+        http://marc.theaimsgroup.com/?l=linux-mips&m=115040510817448
+Who:    Jean Delvare <khali@linux-fr.org>
+
+---------------------------
diff --git a/Documentation/hwmon/abituguru b/Documentation/hwmon/abituguru
index 69cdb527d58f..b2c0d61b39a2 100644
--- a/Documentation/hwmon/abituguru
+++ b/Documentation/hwmon/abituguru
@@ -2,13 +2,36 @@ Kernel driver abituguru
 =======================
 
 Supported chips:
-  * Abit uGuru (Hardware Monitor part only)
+  * Abit uGuru revision 1-3 (Hardware Monitor part only)
     Prefix: 'abituguru'
     Addresses scanned: ISA 0x0E0
     Datasheet: Not available, this driver is based on reverse engineering.
         A "Datasheet" has been written based on the reverse engineering it
         should be available in the same dir as this file under the name
         abituguru-datasheet.
+    Note:
+        The uGuru is a microcontroller with onboard firmware which programs
+        it to behave as a hwmon IC. There are many different revisions of the
+        firmware and thus effectivly many different revisions of the uGuru.
+        Below is an incomplete list with which revisions are used for which
+        Motherboards:
+        uGuru 1.00    ~ 1.24    (AI7, KV8-MAX3, AN7) (1)
+        uGuru 2.0.0.0 ~ 2.0.4.2 (KV8-PRO)
+        uGuru 2.1.0.0 ~ 2.1.2.8 (AS8, AV8, AA8, AG8, AA8XE, AX8)
+        uGuru 2.2.0.0 ~ 2.2.0.6 (AA8 Fatal1ty)
+        uGuru 2.3.0.0 ~ 2.3.0.9 (AN8)
+        uGuru 3.0.0.0 ~ 3.0.1.2 (AW8, AL8, NI8)
+        uGuru 4.xxxxx?          (AT8 32X) (2)
+        1) For revisions 2 and 3 uGuru's the driver can autodetect the
+           sensortype (Volt or Temp) for bank1 sensors, for revision 1 uGuru's
+           this doesnot always work. For these uGuru's the autodection can
+           be overriden with the bank1_types module param. For all 3 known
+           revison 1 motherboards the correct use of this param is:
+           bank1_types=1,1,0,0,0,0,0,2,0,0,0,0,2,0,0,1
+           You may also need to specify the fan_sensors option for these boards
+           fan_sensors=5
+        2) The current version of the abituguru driver is known to NOT work
+           on these Motherboards
 
 Authors:
         Hans de Goede <j.w.r.degoede@hhs.nl>,
@@ -22,6 +45,11 @@ Module Parameters
 * force: bool           Force detection. Note this parameter only causes the
                         detection to be skipped, if the uGuru can't be read
                         the module initialization (insmod) will still fail.
+* bank1_types: int[]    Bank1 sensortype autodetection override:
+                          -1 autodetect (default)
+                           0 volt sensor
+                           1 temp sensor
+                           2 not connected
 * fan_sensors: int      Tell the driver how many fan speed sensors there are
                         on your motherboard. Default: 0 (autodetect).
 * pwms: int             Tell the driver how many fan speed controls (fan
@@ -29,7 +57,7 @@ Module Parameters
 * verbose: int          How verbose should the driver be? (0-3):
                            0 normal output
                            1 + verbose error reporting
-                           2 + sensors type probing info\n"
+                           2 + sensors type probing info (default)
                            3 + retryable error reporting
                         Default: 2 (the driver is still in the testing phase)
 
diff --git a/Documentation/i2c/busses/i2c-sis96x b/Documentation/i2c/busses/i2c-sis96x
index 00a009b977e9..08d7b2dac69a 100644
--- a/Documentation/i2c/busses/i2c-sis96x
+++ b/Documentation/i2c/busses/i2c-sis96x
@@ -42,8 +42,8 @@ I suspect that this driver could be made to work for the following SiS
 chipsets as well: 635, and 635T. If anyone owns a board with those chips
 AND is willing to risk crashing & burning an otherwise well-behaved kernel
 in the name of progress... please contact me at <mhoffman@lightlink.com> or
-via the project's mailing list: <lm-sensors@lm-sensors.org>.  Please
-send bug reports and/or success stories as well.
+via the project's mailing list: <i2c@lm-sensors.org>.  Please send bug
+reports and/or success stories as well.
 
 
 TO DOs
diff --git a/MAINTAINERS b/MAINTAINERS
index 491e034f3475..5276d52c3fc5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -274,7 +274,7 @@ S:	Maintained
 ALI1563 I2C DRIVER
 P:      Rudolf Marek
 M:      r.marek@sh.cvut.cz
-L:      lm-sensors@lm-sensors.org
+L:      i2c@lm-sensors.org
 S:      Maintained
 
 ALPHA PORT
@@ -1249,7 +1249,7 @@ S:	Maintained
 I2C SUBSYSTEM
 P:      Jean Delvare
 M:      khali@linux-fr.org
-L:      lm-sensors@lm-sensors.org
+L:      i2c@lm-sensors.org
 W:      http://www.lm-sensors.nu/
 T:      quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
 S:      Maintained
@@ -2093,7 +2093,7 @@ S:      Maintained
 OPENCORES I2C BUS DRIVER
 P:      Peter Korsgaard
 M:      jacmet@sunsite.dk
-L:      lm-sensors@lm-sensors.org
+L:      i2c@lm-sensors.org
 S:      Maintained
 
 ORACLE CLUSTER FILESYSTEM 2 (OCFS2)
@@ -3132,7 +3132,7 @@ S:	Maintained
 VIAPRO SMBUS DRIVER
 P:      Jean Delvare
 M:      khali@linux-fr.org
-L:      lm-sensors@lm-sensors.org
+L:      i2c@lm-sensors.org
 S:      Maintained
 
 UCLINUX (AND M68KNOMMU)
@@ -3182,6 +3182,12 @@ P:	Evgeniy Polyakov
 M:      johnpol@2ka.mipt.ru
 S:      Maintained
 
+W83791D HARDWARE MONITORING DRIVER
+P:      Charles Spirakis
+M:      bezaur@gmail.com
+L:      lm-sensors@lm-sensors.org
+S:      Maintained
+
 W83L51xD SD/MMC CARD INTERFACE DRIVER
 P:      Pierre Ossman
 M:      drzeus-wbsd@drzeus.cx
diff --git a/drivers/hwmon/abituguru.c b/drivers/hwmon/abituguru.c
index 59122cc0a50a..cc15c4f2e9ec 100644
--- a/drivers/hwmon/abituguru.c
+++ b/drivers/hwmon/abituguru.c
@@ -142,6 +142,14 @@ static const u8 abituguru_pwm_max[5] = { 0, 255, 255, 75, 75 };
 static int force;
 module_param(force, bool, 0);
 MODULE_PARM_DESC(force, "Set to one to force detection.");
+static int bank1_types[ABIT_UGURU_MAX_BANK1_SENSORS] = { -1, -1, -1, -1, -1,
+        -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 };
+module_param_array(bank1_types, int, NULL, 0);
+MODULE_PARM_DESC(bank1_types, "Bank1 sensortype autodetection override:\n"
+        "   -1 autodetect\n"
+        "    0 volt sensor\n"
+        "    1 temp sensor\n"
+        "    2 not connected");
 static int fan_sensors;
 module_param(fan_sensors, int, 0);
 MODULE_PARM_DESC(fan_sensors, "Number of fan sensors on the uGuru "
@@ -397,6 +405,15 @@ abituguru_detect_bank1_sensor_type(struct abituguru_data *data,
         u8 val, buf[3];
         int ret = ABIT_UGURU_NC;
 
+        /* If overriden by the user return the user selected type */
+        if (bank1_types[sensor_addr] >= ABIT_UGURU_IN_SENSOR &&
+                        bank1_types[sensor_addr] <= ABIT_UGURU_NC) {
+                ABIT_UGURU_DEBUG(2, "assuming sensor type %d for bank1 sensor "
+                        "%d because of \"bank1_types\" module param\n",
+                        bank1_types[sensor_addr], (int)sensor_addr);
+                return bank1_types[sensor_addr];
+        }
+
         /* First read the sensor and the current settings */
         if (abituguru_read(data, ABIT_UGURU_SENSOR_BANK1, sensor_addr, &val,
                         1, ABIT_UGURU_MAX_RETRIES) != 1)
@@ -514,7 +531,7 @@ abituguru_detect_no_bank2_sensors(struct abituguru_data *data)
 {
         int i;
 
-        if (fan_sensors) {
+        if (fan_sensors > 0 && fan_sensors <= ABIT_UGURU_MAX_BANK2_SENSORS) {
                 data->bank2_sensors = fan_sensors;
                 ABIT_UGURU_DEBUG(2, "assuming %d fan sensors because of "
                         "\"fan_sensors\" module param\n",
@@ -568,7 +585,7 @@ abituguru_detect_no_pwms(struct abituguru_data *data)
 {
         int i, j;
 
-        if (pwms) {
+        if (pwms > 0 && pwms <= ABIT_UGURU_MAX_PWMS) {
                 data->pwms = pwms;
                 ABIT_UGURU_DEBUG(2, "assuming %d PWM outputs because of "
                         "\"pwms\" module param\n", (int)data->pwms);
diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c
index df05df1a0ef6..ab230c033f99 100644
--- a/drivers/i2c/algos/i2c-algo-bit.c
+++ b/drivers/i2c/algos/i2c-algo-bit.c
@@ -372,7 +372,6 @@ static inline int readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msg)
 
         while (count > 0) {
                 inval = i2c_inb(i2c_adap);
-/*printk("%#02x ",inval); if ( ! (count % 16) ) printk("\n"); */
                 if (inval>=0) {
                         *temp = inval;
                         rdcount++;
@@ -544,8 +543,7 @@ int i2c_bit_add_bus(struct i2c_adapter *adap)
         adap->timeout = 100;    /* default values, should       */
         adap->retries = 3;      /* be replaced by defines       */
 
-        i2c_add_adapter(adap);
-        return 0;
+        return i2c_add_adapter(adap);
 }
 
 
diff --git a/drivers/i2c/algos/i2c-algo-ite.c b/drivers/i2c/algos/i2c-algo-ite.c
index 2db7bfc85225..70d8eefb5efc 100644
--- a/drivers/i2c/algos/i2c-algo-ite.c
+++ b/drivers/i2c/algos/i2c-algo-ite.c
@@ -742,10 +742,8 @@ int i2c_iic_add_bus(struct i2c_adapter *adap)
         adap->retries = 3;              /* be replaced by defines       */
         adap->flags = 0;
 
-        i2c_add_adapter(adap);
         iic_init(iic_adap);
-
-        return 0;
+        return i2c_add_adapter(adap);
 }
 
 
diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c
index 82946acab4c7..b88a6fcf7bd0 100644
--- a/drivers/i2c/algos/i2c-algo-pca.c
+++ b/drivers/i2c/algos/i2c-algo-pca.c
@@ -374,10 +374,10 @@ int i2c_pca_add_bus(struct i2c_adapter *adap)
         adap->timeout = 100;            /* default values, should       */
         adap->retries = 3;              /* be replaced by defines       */
 
-        rval = pca_init(pca_adap);
+        if ((rval = pca_init(pca_adap)))
+                return rval;
 
-        if (!rval)
-                i2c_add_adapter(adap);
+        rval = i2c_add_adapter(adap);
 
         return rval;
 }
diff --git a/drivers/i2c/algos/i2c-algo-pcf.c b/drivers/i2c/algos/i2c-algo-pcf.c
index 6e498df1f717..5b24930adb5a 100644
--- a/drivers/i2c/algos/i2c-algo-pcf.c
+++ b/drivers/i2c/algos/i2c-algo-pcf.c
@@ -479,9 +479,11 @@ int i2c_pcf_add_bus(struct i2c_adapter *adap)
         adap->timeout = 100;            /* default values, should       */
         adap->retries = 3;              /* be replaced by defines       */
 
-        rval = pcf_init_8584(pcf_adap);
-        if (!rval)
-                i2c_add_adapter(adap);
+        if ((rval = pcf_init_8584(pcf_adap)))
+                return rval;
+
+        rval = i2c_add_adapter(adap);
+
         return rval;
 }
 
diff --git a/drivers/i2c/algos/i2c-algo-sibyte.c b/drivers/i2c/algos/i2c-algo-sibyte.c
index 3df3f09995c2..32d41c6fac0f 100644
--- a/drivers/i2c/algos/i2c-algo-sibyte.c
+++ b/drivers/i2c/algos/i2c-algo-sibyte.c
@@ -173,9 +173,7 @@ int i2c_sibyte_add_bus(struct i2c_adapter *i2c_adap, int speed)
                 printk("\n");
         }
 
-        i2c_add_adapter(i2c_adap);
-
-        return 0;
+        return i2c_add_adapter(i2c_adap);
 }
 
 
diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c
index aca7e1668605..48c56939c861 100644
--- a/drivers/i2c/busses/i2c-iop3xx.c
+++ b/drivers/i2c/busses/i2c-iop3xx.c
@@ -21,6 +21,9 @@
  * - Make it work with IXP46x chips
  * - Cleanup function names, coding style, etc
  *
+ * - writing to slave address causes latchup on iop331.
+ *      fix: driver refuses to address self.
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, version 2.
@@ -73,12 +76,6 @@ iop3xx_i2c_reset(struct i2c_algo_iop3xx_data *iop3xx_adap)
 } 
 
 static void 
-iop3xx_i2c_set_slave_addr(struct i2c_algo_iop3xx_data *iop3xx_adap)
-{
-        __raw_writel(MYSAR, iop3xx_adap->ioaddr + SAR_OFFSET);
-}
-
-static void 
 iop3xx_i2c_enable(struct i2c_algo_iop3xx_data *iop3xx_adap)
 {
         u32 cr = IOP3XX_ICR_GCD | IOP3XX_ICR_SCLEN | IOP3XX_ICR_UE;
@@ -248,6 +245,13 @@ iop3xx_i2c_send_target_addr(struct i2c_algo_iop3xx_data *iop3xx_adap,
         int status;
         int rc;
 
+        /* avoid writing to my slave address (hangs on 80331),
+         * forbidden in Intel developer manual
+         */
+        if (msg->addr == MYSAR) {
+                return -EBUSY;
+        }
+
         __raw_writel(iic_cook_addr(msg), iop3xx_adap->ioaddr + DBR_OFFSET);
         
         cr &= ~(IOP3XX_ICR_MSTOP | IOP3XX_ICR_NACK);
@@ -498,7 +502,6 @@ iop3xx_i2c_probe(struct platform_device *pdev)
         spin_lock_init(&adapter_data->lock);
 
         iop3xx_i2c_reset(adapter_data);
-        iop3xx_i2c_set_slave_addr(adapter_data);
         iop3xx_i2c_enable(adapter_data);
 
         platform_set_drvdata(pdev, new_adapter);
diff --git a/drivers/i2c/busses/i2c-iop3xx.h b/drivers/i2c/busses/i2c-iop3xx.h
index e46ebaea7b1e..8485861f6a36 100644
--- a/drivers/i2c/busses/i2c-iop3xx.h
+++ b/drivers/i2c/busses/i2c-iop3xx.h
@@ -80,7 +80,7 @@
 #define IOP3XX_GPOD_I2C0        0x00c0  /* clear these bits to enable ch0 */
 #define IOP3XX_GPOD_I2C1        0x0030  /* clear these bits to enable ch1 */
 
-#define MYSAR                   0x02    /* SWAG a suitable slave address */
+#define MYSAR                   0       /* default slave address */
 
 #define I2C_ERR                 321
 #define I2C_ERR_BERR            (I2C_ERR+0)
diff --git a/drivers/i2c/busses/i2c-powermac.c b/drivers/i2c/busses/i2c-powermac.c
index 2a0b3be7cdd0..53bb43593863 100644
--- a/drivers/i2c/busses/i2c-powermac.c
+++ b/drivers/i2c/busses/i2c-powermac.c
@@ -148,8 +148,6 @@ static int i2c_powermac_master_xfer(	struct i2c_adapter *adap,
         int                     read;
         int                     addrdir;
 
-        if (num != 1)
-                return -EINVAL;
         if (msgs->flags & I2C_M_TEN)
                 return -EINVAL;
         read = (msgs->flags & I2C_M_RD) != 0;
@@ -166,7 +164,7 @@ static int i2c_powermac_master_xfer(	struct i2c_adapter *adap,
         rc = pmac_i2c_xfer(bus, addrdir, 0, 0, msgs->buf, msgs->len);
  bail:
         pmac_i2c_close(bus);
-        return rc < 0 ? rc : msgs->len;
+        return rc < 0 ? rc : 1;
 }
 
 static u32 i2c_powermac_func(struct i2c_adapter * adapter)
diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c
index 22a3eda04166..ced309ff056f 100644
--- a/drivers/i2c/busses/scx200_acb.c
+++ b/drivers/i2c/busses/scx200_acb.c
@@ -184,21 +184,21 @@ static void scx200_acb_machine(struct scx200_acb_iface *iface, u8 status)
                 break;
 
         case state_read:
-                /* Set ACK if receiving the last byte */
-                if (iface->len == 1)
+                /* Set ACK if _next_ byte will be the last one */
+                if (iface->len == 2)
                         outb(inb(ACBCTL1) | ACBCTL1_ACK, ACBCTL1);
                 else
                         outb(inb(ACBCTL1) & ~ACBCTL1_ACK, ACBCTL1);
 
-                *iface->ptr++ = inb(ACBSDA);
-                --iface->len;
-
-                if (iface->len == 0) {
+                if (iface->len == 1) {
                         iface->result = 0;
                         iface->state = state_idle;
                         outb(inb(ACBCTL1) | ACBCTL1_STOP, ACBCTL1);
                 }
 
+                *iface->ptr++ = inb(ACBSDA);
+                --iface->len;
+
                 break;
 
         case state_write:
@@ -307,8 +307,12 @@ static s32 scx200_acb_smbus_xfer(struct i2c_adapter *adapter,
                 buffer = (u8 *)&cur_word;
                 break;
 
-        case I2C_SMBUS_BLOCK_DATA:
+        case I2C_SMBUS_I2C_BLOCK_DATA:
+                if (rw == I2C_SMBUS_READ)
+                        data->block[0] = I2C_SMBUS_BLOCK_MAX; /* For now */
                 len = data->block[0];
+                if (len == 0 || len > I2C_SMBUS_BLOCK_MAX)
+                        return -EINVAL;
                 buffer = &data->block[1];
                 break;
 
@@ -372,7 +376,7 @@ static u32 scx200_acb_func(struct i2c_adapter *adapter)
 {
         return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
                I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
-               I2C_FUNC_SMBUS_BLOCK_DATA;
+               I2C_FUNC_SMBUS_I2C_BLOCK;
 }
 
 /* For now, we only handle combined mode (smbus) */
diff --git a/drivers/i2c/chips/pca9539.c b/drivers/i2c/chips/pca9539.c
index 54b6e6a4beed..cb22280cdd27 100644
--- a/drivers/i2c/chips/pca9539.c
+++ b/drivers/i2c/chips/pca9539.c
@@ -134,11 +134,13 @@ static int pca9539_detect(struct i2c_adapter *adapter, int address, int kind)
         new_client->driver = &pca9539_driver;
         new_client->flags = 0;
 
-        /* Detection: the pca9539 only has 8 registers (0-7).
-           A read of 7 should succeed, but a read of 8 should fail. */
-        if ((i2c_smbus_read_byte_data(new_client, 7) < 0) ||
-            (i2c_smbus_read_byte_data(new_client, 8) >= 0))
-                goto exit_kfree;
+        if (kind < 0) {
+                /* Detection: the pca9539 only has 8 registers (0-7).
+                   A read of 7 should succeed, but a read of 8 should fail. */
+                if ((i2c_smbus_read_byte_data(new_client, 7) < 0) ||
+                    (i2c_smbus_read_byte_data(new_client, 8) >= 0))
+                        goto exit_kfree;
+        }
 
         strlcpy(new_client->name, "pca9539", I2C_NAME_SIZE);
 
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index a45155f799d4..9cb277d6aa48 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -756,9 +756,9 @@ int i2c_probe(struct i2c_adapter *adapter,
                                         "parameter for adapter %d, "
                                         "addr 0x%02x\n", adap_id,
                                         address_data->ignore[j + 1]);
+                                ignore = 1;
+                                break;
                         }
-                        ignore = 1;
-                        break;
                 }
                 if (ignore)
                         continue;
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index 526ddc8eecfb..eb0628a7ecc6 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -193,6 +193,8 @@ struct i2c_algorithm {
            to NULL. If an adapter algorithm can do SMBus access, set 
            smbus_xfer. If set to NULL, the SMBus protocol is simulated
            using common I2C messages */
+        /* master_xfer should return the number of messages successfully
+           processed, or a negative value on error */
         int (*master_xfer)(struct i2c_adapter *adap,struct i2c_msg *msgs, 
                            int num);
         int (*smbus_xfer) (struct i2c_adapter *adap, u16 addr,