3 files changed, 797 insertions, 0 deletions

diff --git a/drivers/atm/Kconfig b/drivers/atm/Kconfig
index f197a193633a..191b85e857e0 100644
--- a/drivers/atm/Kconfig
+++ b/drivers/atm/Kconfig
@@ -391,4 +391,10 @@ config ATM_HE_USE_SUNI
           Support for the S/UNI-Ultra and S/UNI-622 found in the ForeRunner
           HE cards.  This driver provides carrier detection some statistics.
 
+config ATM_SOLOS
+        tristate "Solos ADSL2+ PCI Multiport card driver"
+        depends on PCI
+        help
+          Support for the Solos multiport ADSL2+ card.
+
 endif # ATM
diff --git a/drivers/atm/Makefile b/drivers/atm/Makefile
index 0bfb31748ecf..62c3cc1075ae 100644
--- a/drivers/atm/Makefile
+++ b/drivers/atm/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_ATM_IA)		+= iphase.o suni.o
 obj-$(CONFIG_ATM_FORE200E)      += fore_200e.o
 obj-$(CONFIG_ATM_ENI)           += eni.o suni.o
 obj-$(CONFIG_ATM_IDT77252)      += idt77252.o
+obj-$(CONFIG_ATM_SOLOS)         += solos-pci.o
 
 ifeq ($(CONFIG_ATM_NICSTAR_USE_SUNI),y)
   obj-$(CONFIG_ATM_NICSTAR)     += suni.o
diff --git a/drivers/atm/solos-pci.c b/drivers/atm/solos-pci.c
new file mode 100644
index 000000000000..72fc0f799a64
--- /dev/null
+++ b/drivers/atm/solos-pci.c
@@ -0,0 +1,790 @@
+/*
+ * Driver for the Solos PCI ADSL2+ card, designed to support Linux by
+ *  Traverse Technologies -- http://www.traverse.com.au/
+ *  Xrio Limited          -- http://www.xrio.com/
+ *
+ *
+ * Copyright © 2008 Traverse Technologies
+ * Copyright © 2008 Intel Corporation
+ *
+ * Authors: Nathan Williams <nathan@traverse.com.au>
+ *          David Woodhouse <dwmw2@infradead.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#define DEBUG
+#define VERBOSE_DEBUG
+
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/atm.h>
+#include <linux/atmdev.h>
+#include <linux/skbuff.h>
+#include <linux/sysfs.h>
+#include <linux/device.h>
+#include <linux/kobject.h>
+
+#define VERSION "0.04"
+#define PTAG "solos-pci"
+
+#define CONFIG_RAM_SIZE 128
+#define FLAGS_ADDR      0x7C
+#define IRQ_EN_ADDR     0x78
+#define FPGA_VER        0x74
+#define IRQ_CLEAR       0x70
+#define BUG_FLAG        0x6C
+
+#define DATA_RAM_SIZE   32768
+#define BUF_SIZE        4096
+
+#define RX_BUF(card, nr) ((card->buffers) + (nr)*BUF_SIZE*2)
+#define TX_BUF(card, nr) ((card->buffers) + (nr)*BUF_SIZE*2 + BUF_SIZE)
+
+static int debug = 0;
+static int atmdebug = 0;
+
+struct pkt_hdr {
+        __le16 size;
+        __le16 vpi;
+        __le16 vci;
+        __le16 type;
+};
+
+#define PKT_DATA        0
+#define PKT_COMMAND     1
+#define PKT_POPEN       3
+#define PKT_PCLOSE      4
+
+struct solos_card {
+        void __iomem *config_regs;
+        void __iomem *buffers;
+        int nr_ports;
+        struct pci_dev *dev;
+        struct atm_dev *atmdev[4];
+        struct tasklet_struct tlet;
+        spinlock_t tx_lock;
+        spinlock_t tx_queue_lock;
+        spinlock_t cli_queue_lock;
+        struct sk_buff_head tx_queue[4];
+        struct sk_buff_head cli_queue[4];
+};
+
+#define SOLOS_CHAN(atmdev) ((int)(unsigned long)(atmdev)->phy_data)
+
+MODULE_AUTHOR("Traverse Technologies <support@traverse.com.au>");
+MODULE_DESCRIPTION("Solos PCI driver");
+MODULE_VERSION(VERSION);
+MODULE_LICENSE("GPL");
+MODULE_PARM_DESC(debug, "Enable Loopback");
+MODULE_PARM_DESC(atmdebug, "Print ATM data");
+module_param(debug, int, 0444);
+module_param(atmdebug, int, 0444);
+
+static int opens;
+
+static void fpga_queue(struct solos_card *card, int port, struct sk_buff *skb,
+                       struct atm_vcc *vcc);
+static int fpga_tx(struct solos_card *);
+static irqreturn_t solos_irq(int irq, void *dev_id);
+static struct atm_vcc* find_vcc(struct atm_dev *dev, short vpi, int vci);
+static int list_vccs(int vci);
+static int atm_init(struct solos_card *);
+static void atm_remove(struct solos_card *);
+static int send_command(struct solos_card *card, int dev, const char *buf, size_t size);
+static void solos_bh(unsigned long);
+static int print_buffer(struct sk_buff *buf);
+
+static inline void solos_pop(struct atm_vcc *vcc, struct sk_buff *skb)
+{
+        if (vcc->pop)
+                vcc->pop(vcc, skb);
+        else
+                dev_kfree_skb_any(skb);
+}
+
+static ssize_t console_show(struct device *dev, struct device_attribute *attr,
+                            char *buf)
+{
+        struct atm_dev *atmdev = container_of(dev, struct atm_dev, class_dev);
+        struct solos_card *card = atmdev->dev_data;
+        struct sk_buff *skb;
+
+        spin_lock(&card->cli_queue_lock);
+        skb = skb_dequeue(&card->cli_queue[SOLOS_CHAN(atmdev)]);
+        spin_unlock(&card->cli_queue_lock);
+        if(skb == NULL)
+                return sprintf(buf, "No data.\n");
+
+        memcpy(buf, skb->data, skb->len);
+        dev_dbg(&card->dev->dev, "len: %d\n", skb->len);
+
+        kfree_skb(skb);
+        return skb->len;
+}
+
+static int send_command(struct solos_card *card, int dev, const char *buf, size_t size)
+{
+        struct sk_buff *skb;
+        struct pkt_hdr *header;
+
+//      dev_dbg(&card->dev->dev, "size: %d\n", size);
+
+        if (size > (BUF_SIZE - sizeof(*header))) {
+                dev_dbg(&card->dev->dev, "Command is too big.  Dropping request\n");
+                return 0;
+        }
+        skb = alloc_skb(size + sizeof(*header), GFP_ATOMIC);
+        if (!skb) {
+                dev_warn(&card->dev->dev, "Failed to allocate sk_buff in send_command()\n");
+                return 0;
+        }
+
+        header = (void *)skb_put(skb, sizeof(*header));
+
+        header->size = cpu_to_le16(size);
+        header->vpi = cpu_to_le16(0);
+        header->vci = cpu_to_le16(0);
+        header->type = cpu_to_le16(PKT_COMMAND);
+
+        memcpy(skb_put(skb, size), buf, size);
+
+        fpga_queue(card, dev, skb, NULL);
+
+        return 0;
+}
+
+static ssize_t console_store(struct device *dev, struct device_attribute *attr,
+                             const char *buf, size_t count)
+{
+        struct atm_dev *atmdev = container_of(dev, struct atm_dev, class_dev);
+        struct solos_card *card = atmdev->dev_data;
+        int err;
+
+        err = send_command(card, SOLOS_CHAN(atmdev), buf, count);
+
+        return err?:count;
+}
+
+static DEVICE_ATTR(console, 0644, console_show, console_store);
+
+static irqreturn_t solos_irq(int irq, void *dev_id)
+{
+        struct solos_card *card = dev_id;
+        int handled = 1;
+
+        //ACK IRQ
+        iowrite32(0, card->config_regs + IRQ_CLEAR);
+        //Disable IRQs from FPGA
+        iowrite32(0, card->config_regs + IRQ_EN_ADDR);
+
+        /* If we only do it when the device is open, we lose console
+           messages */
+        if (1 || opens)
+                tasklet_schedule(&card->tlet);
+
+        //Enable IRQs from FPGA
+        iowrite32(1, card->config_regs + IRQ_EN_ADDR);
+        return IRQ_RETVAL(handled);
+}
+
+void solos_bh(unsigned long card_arg)
+{
+        struct solos_card *card = (void *)card_arg;
+        int port;
+        uint32_t card_flags;
+        uint32_t tx_mask;
+        uint32_t rx_done = 0;
+
+        card_flags = ioread32(card->config_regs + FLAGS_ADDR);
+
+        /* The TX bits are set if the channel is busy; clear if not. We want to
+           invoke fpga_tx() unless _all_ the bits for active channels are set */
+        tx_mask = (1 << card->nr_ports) - 1;
+        if ((card_flags & tx_mask) != tx_mask)
+                fpga_tx(card);
+
+        for (port = 0; port < card->nr_ports; port++) {
+                if (card_flags & (0x10 << port)) {
+                        struct pkt_hdr header;
+                        struct sk_buff *skb;
+                        struct atm_vcc *vcc;
+                        int size;
+
+                        rx_done |= 0x10 << port;
+
+                        memcpy_fromio(&header, RX_BUF(card, port), sizeof(header));
+
+                        size = le16_to_cpu(header.size);
+
+                        skb = alloc_skb(size, GFP_ATOMIC);
+                        if (!skb) {
+                                if (net_ratelimit())
+                                        dev_warn(&card->dev->dev, "Failed to allocate sk_buff for RX\n");
+                                continue;
+                        }
+
+                        memcpy_fromio(skb_put(skb, size),
+                                      RX_BUF(card, port) + sizeof(header),
+                                      size);
+
+                        if (atmdebug) {
+                                dev_info(&card->dev->dev, "Received: device %d\n", port);
+                                dev_info(&card->dev->dev, "size: %d VPI: %d VCI: %d\n",
+                                         size, le16_to_cpu(header.vpi),
+                                         le16_to_cpu(header.vci));
+                                print_buffer(skb);
+                        }
+
+                        switch (le16_to_cpu(header.type)) {
+                        case PKT_DATA:
+                                vcc = find_vcc(card->atmdev[port], le16_to_cpu(header.vpi),
+                                               le16_to_cpu(header.vci));
+                                if (!vcc) {
+                                        if (net_ratelimit())
+                                                dev_warn(&card->dev->dev, "Received packet for unknown VCI.VPI %d.%d on port %d\n",
+                                                         le16_to_cpu(header.vci), le16_to_cpu(header.vpi),
+                                                         port);
+                                        continue;
+                                }
+                                atm_charge(vcc, skb->truesize);
+                                vcc->push(vcc, skb);
+                                atomic_inc(&vcc->stats->rx);
+                                break;
+
+                        case PKT_COMMAND:
+                        default: /* FIXME: Not really, surely? */
+                                spin_lock(&card->cli_queue_lock);
+                                if (skb_queue_len(&card->cli_queue[port]) > 10) {
+                                        if (net_ratelimit())
+                                                dev_warn(&card->dev->dev, "Dropping console response on port %d\n",
+                                                         port);
+                                } else
+                                        skb_queue_tail(&card->cli_queue[port], skb);
+                                spin_unlock(&card->cli_queue_lock);
+                                break;
+                        }
+                }
+        }
+        if (rx_done)
+                iowrite32(rx_done, card->config_regs + FLAGS_ADDR);
+
+        return;
+}
+
+static struct atm_vcc *find_vcc(struct atm_dev *dev, short vpi, int vci)
+{
+        struct hlist_head *head;
+        struct atm_vcc *vcc = NULL;
+        struct hlist_node *node;
+        struct sock *s;
+
+        read_lock(&vcc_sklist_lock);
+        head = &vcc_hash[vci & (VCC_HTABLE_SIZE -1)];
+        sk_for_each(s, node, head) {
+                vcc = atm_sk(s);
+                if (vcc->dev == dev && vcc->vci == vci &&
+                    vcc->vpi == vpi && vcc->qos.rxtp.traffic_class != ATM_NONE)
+                        goto out;
+        }
+        vcc = NULL;
+ out:
+        read_unlock(&vcc_sklist_lock);
+        return vcc;
+}
+
+static int list_vccs(int vci)
+{
+        struct hlist_head *head;
+        struct atm_vcc *vcc;
+        struct hlist_node *node;
+        struct sock *s;
+        int num_found = 0;
+        int i;
+
+        read_lock(&vcc_sklist_lock);
+        if (vci != 0){
+                head = &vcc_hash[vci & (VCC_HTABLE_SIZE -1)];
+                sk_for_each(s, node, head) {
+                        num_found ++;
+                        vcc = atm_sk(s);
+                        printk(KERN_DEBUG "Device: %d Vpi: %d Vci: %d\n",
+                               vcc->dev->number,
+                               vcc->vpi,
+                               vcc->vci);
+                }
+        } else {
+                for(i=0; i<32; i++){
+                        head = &vcc_hash[i];
+                        sk_for_each(s, node, head) {
+                                num_found ++;
+                                vcc = atm_sk(s);
+                                printk(KERN_DEBUG "Device: %d Vpi: %d Vci: %d\n",
+                                       vcc->dev->number,
+                                       vcc->vpi,
+                                       vcc->vci);
+                        }
+                }
+        }
+        read_unlock(&vcc_sklist_lock);
+        return num_found;
+}
+
+
+static int popen(struct atm_vcc *vcc)
+{
+        struct solos_card *card = vcc->dev->dev_data;
+        struct sk_buff *skb;
+        struct pkt_hdr *header;
+
+        skb = alloc_skb(sizeof(*header), GFP_ATOMIC);
+        if (!skb && net_ratelimit()) {
+                dev_warn(&card->dev->dev, "Failed to allocate sk_buff in popen()\n");
+                return -ENOMEM;
+        }
+        header = (void *)skb_put(skb, sizeof(*header));
+
+        header->size = cpu_to_le16(sizeof(*header));
+        header->vpi = cpu_to_le16(vcc->vpi);
+        header->vci = cpu_to_le16(vcc->vci);
+        header->type = cpu_to_le16(PKT_POPEN);
+
+        fpga_queue(card, SOLOS_CHAN(vcc->dev), skb, NULL);
+
+//      dev_dbg(&card->dev->dev, "Open for vpi %d and vci %d on interface %d\n", vcc->vpi, vcc->vci, SOLOS_CHAN(vcc->dev));
+        set_bit(ATM_VF_ADDR, &vcc->flags); // accept the vpi / vci
+        set_bit(ATM_VF_READY, &vcc->flags);
+        list_vccs(0);
+
+        if (!opens)
+                iowrite32(1, card->config_regs + IRQ_EN_ADDR);
+
+        opens++; //count open PVCs
+
+        return 0;
+}
+
+static void pclose(struct atm_vcc *vcc)
+{
+        struct solos_card *card = vcc->dev->dev_data;
+        struct sk_buff *skb;
+        struct pkt_hdr *header;
+
+        skb = alloc_skb(sizeof(*header), GFP_ATOMIC);
+        if (!skb) {
+                dev_warn(&card->dev->dev, "Failed to allocate sk_buff in pclose()\n");
+                return;
+        }
+        header = (void *)skb_put(skb, sizeof(*header));
+
+        header->size = cpu_to_le16(sizeof(*header));
+        header->vpi = cpu_to_le16(vcc->vpi);
+        header->vci = cpu_to_le16(vcc->vci);
+        header->type = cpu_to_le16(PKT_PCLOSE);
+
+        fpga_queue(card, SOLOS_CHAN(vcc->dev), skb, NULL);
+
+//      dev_dbg(&card->dev->dev, "Close for vpi %d and vci %d on interface %d\n", vcc->vpi, vcc->vci, SOLOS_CHAN(vcc->dev));
+        if (!--opens)
+                iowrite32(0, card->config_regs + IRQ_EN_ADDR);
+
+        clear_bit(ATM_VF_ADDR, &vcc->flags);
+        clear_bit(ATM_VF_READY, &vcc->flags);
+
+        return;
+}
+
+static int print_buffer(struct sk_buff *buf)
+{
+        int len,i;
+        char msg[500];
+        char item[10];
+
+        len = buf->len;
+        for (i = 0; i < len; i++){
+                if(i % 8 == 0)
+                        sprintf(msg, "%02X: ", i);
+
+                sprintf(item,"%02X ",*(buf->data + i));
+                strcat(msg, item);
+                if(i % 8 == 7) {
+                        sprintf(item, "\n");
+                        strcat(msg, item);
+                        printk(KERN_DEBUG "%s", msg);
+                }
+        }
+        if (i % 8 != 0) {
+                sprintf(item, "\n");
+                strcat(msg, item);
+                printk(KERN_DEBUG "%s", msg);
+        }
+        printk(KERN_DEBUG "\n");
+
+        return 0;
+}
+
+static void fpga_queue(struct solos_card *card, int port, struct sk_buff *skb,
+                       struct atm_vcc *vcc)
+{
+        int old_len;
+
+        *(void **)skb->cb = vcc;
+
+        spin_lock(&card->tx_queue_lock);
+        old_len = skb_queue_len(&card->tx_queue[port]);
+        skb_queue_tail(&card->tx_queue[port], skb);
+        spin_unlock(&card->tx_queue_lock);
+
+        /* If TX might need to be started, do so */
+        if (!old_len)
+                fpga_tx(card);
+}
+
+static int fpga_tx(struct solos_card *card)
+{
+        uint32_t tx_pending;
+        uint32_t tx_started = 0;
+        struct sk_buff *skb;
+        struct atm_vcc *vcc;
+        unsigned char port;
+        unsigned long flags;
+
+        spin_lock_irqsave(&card->tx_lock, flags);
+
+        tx_pending = ioread32(card->config_regs + FLAGS_ADDR);
+
+        dev_vdbg(&card->dev->dev, "TX Flags are %X\n", tx_pending);
+
+        for (port = 0; port < card->nr_ports; port++) {
+                if (!(tx_pending & (1 << port))) {
+
+                        spin_lock(&card->tx_queue_lock);
+                        skb = skb_dequeue(&card->tx_queue[port]);
+                        spin_unlock(&card->tx_queue_lock);
+
+                        if (!skb)
+                                continue;
+
+                        if (atmdebug) {
+                                dev_info(&card->dev->dev, "Transmitted: port %d\n",
+                                         port);
+                                print_buffer(skb);
+                        }
+                        memcpy_toio(TX_BUF(card, port), skb->data, skb->len);
+
+                        vcc = *(void **)skb->cb;
+
+                        if (vcc) {
+                                atomic_inc(&vcc->stats->tx);
+                                solos_pop(vcc, skb);
+                        } else
+                                dev_kfree_skb_irq(skb);
+
+                        tx_started |= 1 << port; //Set TX full flag
+                }
+        }
+        if (tx_started)
+                iowrite32(tx_started, card->config_regs + FLAGS_ADDR);
+
+        spin_unlock_irqrestore(&card->tx_lock, flags);
+        return 0;
+}
+
+static int psend(struct atm_vcc *vcc, struct sk_buff *skb)
+{
+        struct solos_card *card = vcc->dev->dev_data;
+        struct sk_buff *skb2 = NULL;
+        struct pkt_hdr *header;
+
+        //dev_dbg(&card->dev->dev, "psend called.\n");
+        //dev_dbg(&card->dev->dev, "dev,vpi,vci = %d,%d,%d\n",SOLOS_CHAN(vcc->dev),vcc->vpi,vcc->vci);
+
+        if (debug) {
+                skb2 = atm_alloc_charge(vcc, skb->len, GFP_ATOMIC);
+                if (skb2) {
+                        memcpy(skb2->data, skb->data, skb->len);
+                        skb_put(skb2, skb->len);
+                        vcc->push(vcc, skb2);
+                        atomic_inc(&vcc->stats->rx);
+                }
+                atomic_inc(&vcc->stats->tx);
+                solos_pop(vcc, skb);
+                return 0;
+        }
+
+        if (skb->len > (BUF_SIZE - sizeof(*header))) {
+                dev_warn(&card->dev->dev, "Length of PDU is too large. Dropping PDU.\n");
+                solos_pop(vcc, skb);
+                return 0;
+        }
+
+        if (!skb_clone_writable(skb, sizeof(*header))) {
+                int expand_by = 0;
+                int ret;
+
+                if (skb_headroom(skb) < sizeof(*header))
+                        expand_by = sizeof(*header) - skb_headroom(skb);
+
+                ret = pskb_expand_head(skb, expand_by, 0, GFP_ATOMIC);
+                if (ret) {
+                        solos_pop(vcc, skb);
+                        return ret;
+                }
+        }
+
+        header = (void *)skb_push(skb, sizeof(*header));
+
+        header->size = cpu_to_le16(skb->len);
+        header->vpi = cpu_to_le16(vcc->vpi);
+        header->vci = cpu_to_le16(vcc->vci);
+        header->type = cpu_to_le16(PKT_DATA);
+
+        fpga_queue(card, SOLOS_CHAN(vcc->dev), skb, vcc);
+
+        return 0;
+}
+
+static struct atmdev_ops fpga_ops = {
+        .open =         popen,
+        .close =        pclose,
+        .ioctl =        NULL,
+        .getsockopt =   NULL,
+        .setsockopt =   NULL,
+        .send =         psend,
+        .send_oam =     NULL,
+        .phy_put =      NULL,
+        .phy_get =      NULL,
+        .change_qos =   NULL,
+        .proc_read =    NULL,
+        .owner =        THIS_MODULE
+};
+
+static int fpga_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+        int err, i;
+        uint16_t fpga_ver;
+        uint8_t major_ver, minor_ver;
+        uint32_t data32;
+        struct solos_card *card;
+
+        if (debug)
+                return 0;
+
+        card = kzalloc(sizeof(*card), GFP_KERNEL);
+        if (!card)
+                return -ENOMEM;
+
+        card->dev = dev;
+
+        err = pci_enable_device(dev);
+        if (err) {
+                dev_warn(&dev->dev,  "Failed to enable PCI device\n");
+                goto out;
+        }
+
+        err = pci_request_regions(dev, "solos");
+        if (err) {
+                dev_warn(&dev->dev, "Failed to request regions\n");
+                goto out;
+        }
+
+        card->config_regs = pci_iomap(dev, 0, CONFIG_RAM_SIZE);
+        if (!card->config_regs) {
+                dev_warn(&dev->dev, "Failed to ioremap config registers\n");
+                goto out_release_regions;
+        }
+        card->buffers = pci_iomap(dev, 1, DATA_RAM_SIZE);
+        if (!card->buffers) {
+                dev_warn(&dev->dev, "Failed to ioremap data buffers\n");
+                goto out_unmap_config;
+        }
+
+//      for(i=0;i<64 ;i+=4){
+//              data32=ioread32(card->buffers + i);
+//              dev_dbg(&card->dev->dev, "%08lX\n",(unsigned long)data32);
+//      }
+
+        //Fill Config Mem with zeros
+        for(i = 0; i < 128; i += 4)
+                iowrite32(0, card->config_regs + i);
+
+        //Set RX empty flags
+        iowrite32(0xF0, card->config_regs + FLAGS_ADDR);
+
+        data32 = ioread32(card->config_regs + FPGA_VER);
+        fpga_ver = (data32 & 0x0000FFFF);
+        major_ver = ((data32 & 0xFF000000) >> 24);
+        minor_ver = ((data32 & 0x00FF0000) >> 16);
+        dev_info(&dev->dev, "Solos FPGA Version %d.%02d svn-%d\n",
+                 major_ver, minor_ver, fpga_ver);
+
+        card->nr_ports = 2; /* FIXME: Detect daughterboard */
+
+        err = atm_init(card);
+        if (err)
+                goto out_unmap_both;
+
+        pci_set_drvdata(dev, card);
+        tasklet_init(&card->tlet, solos_bh, (unsigned long)card);
+        spin_lock_init(&card->tx_lock);
+        spin_lock_init(&card->tx_queue_lock);
+        spin_lock_init(&card->cli_queue_lock);
+/*
+        // Set Loopback mode
+        data32 = 0x00010000;
+        iowrite32(data32,card->config_regs + FLAGS_ADDR);
+*/
+/*
+        // Fill Buffers with zeros
+        for (i = 0; i < BUF_SIZE * 8; i += 4)
+                iowrite32(0, card->buffers + i);
+*/
+/*
+        for(i = 0; i < (BUF_SIZE * 1); i += 4)
+                iowrite32(0x12345678, card->buffers + i + (0*BUF_SIZE));
+        for(i = 0; i < (BUF_SIZE * 1); i += 4)
+                iowrite32(0xabcdef98, card->buffers + i + (1*BUF_SIZE));
+
+        // Read Config Memory
+        printk(KERN_DEBUG "Reading Config MEM\n");
+        i = 0;
+        for(i = 0; i < 16; i++) {
+                data32=ioread32(card->buffers + i*(BUF_SIZE/2));
+                printk(KERN_ALERT "Addr: %lX Data: %08lX\n",
+                       (unsigned long)(addr_start + i*(BUF_SIZE/2)),
+                       (unsigned long)data32);
+        }
+*/
+        //dev_dbg(&card->dev->dev, "Requesting IRQ: %d\n",dev->irq);
+        err = request_irq(dev->irq, solos_irq, IRQF_DISABLED|IRQF_SHARED,
+                          "solos-pci", card);
+        if (err)
+                dev_dbg(&card->dev->dev, "Failed to request interrupt IRQ: %d\n", dev->irq);
+
+        // Enable IRQs
+        iowrite32(1, card->config_regs + IRQ_EN_ADDR);
+
+        return 0;
+
+ out_unmap_both:
+        pci_iounmap(dev, card->config_regs);
+ out_unmap_config:
+        pci_iounmap(dev, card->buffers);
+ out_release_regions:
+        pci_release_regions(dev);
+ out:
+        return err;
+}
+
+static int atm_init(struct solos_card *card)
+{
+        int i;
+
+        opens = 0;
+
+        for (i = 0; i < card->nr_ports; i++) {
+                skb_queue_head_init(&card->tx_queue[i]);
+                skb_queue_head_init(&card->cli_queue[i]);
+
+                card->atmdev[i] = atm_dev_register("solos-pci", &fpga_ops, -1, NULL);
+                if (!card->atmdev[i]) {
+                        dev_err(&card->dev->dev, "Could not register ATM device %d\n", i);
+                        atm_remove(card);
+                        return -ENODEV;
+                }
+                if (device_create_file(&card->atmdev[i]->class_dev, &dev_attr_console))
+                        dev_err(&card->dev->dev, "Could not register console for ATM device %d\n", i);
+
+                dev_info(&card->dev->dev, "Registered ATM device %d\n", card->atmdev[i]->number);
+
+                card->atmdev[i]->ci_range.vpi_bits = 8;
+                card->atmdev[i]->ci_range.vci_bits = 16;
+                card->atmdev[i]->dev_data = card;
+                card->atmdev[i]->phy_data = (void *)(unsigned long)i;
+        }
+        return 0;
+}
+
+static void atm_remove(struct solos_card *card)
+{
+        int i;
+
+        for (i = 0; i < card->nr_ports; i++) {
+                if (card->atmdev[i]) {
+                        dev_info(&card->dev->dev, "Unregistering ATM device %d\n", card->atmdev[i]->number);
+                        atm_dev_deregister(card->atmdev[i]);
+                }
+        }
+}
+
+static void fpga_remove(struct pci_dev *dev)
+{
+        struct solos_card *card = pci_get_drvdata(dev);
+
+        if (debug)
+                return;
+
+        atm_remove(card);
+
+        dev_vdbg(&dev->dev, "Freeing IRQ\n");
+        // Disable IRQs from FPGA
+        iowrite32(0, card->config_regs + IRQ_EN_ADDR);
+        free_irq(dev->irq, card);
+        tasklet_kill(&card->tlet);
+
+        //      iowrite32(0x01,pciregs);
+        dev_vdbg(&dev->dev, "Unmapping PCI resource\n");
+        pci_iounmap(dev, card->buffers);
+        pci_iounmap(dev, card->config_regs);
+
+        dev_vdbg(&dev->dev, "Releasing PCI Region\n");
+        pci_release_regions(dev);
+        pci_disable_device(dev);
+
+        pci_set_drvdata(dev, NULL);
+        kfree(card);
+//      dev_dbg(&card->dev->dev, "fpga_remove\n");
+        return;
+}
+
+static struct pci_device_id fpga_pci_tbl[] __devinitdata = {
+        { 0x10ee, 0x0300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+        { 0, }
+};
+
+MODULE_DEVICE_TABLE(pci,fpga_pci_tbl);
+
+static struct pci_driver fpga_driver = {
+        .name =         "solos",
+        .id_table =     fpga_pci_tbl,
+        .probe =        fpga_probe,
+        .remove =       fpga_remove,
+};
+
+
+static int __init solos_pci_init(void)
+{
+        printk(KERN_INFO "Solos PCI Driver Version %s\n", VERSION);
+        return pci_register_driver(&fpga_driver);
+}
+
+static void __exit solos_pci_exit(void)
+{
+        pci_unregister_driver(&fpga_driver);
+        printk(KERN_INFO "Solos PCI Driver %s Unloaded\n", VERSION);
+}
+
+module_init(solos_pci_init);
+module_exit(solos_pci_exit);