8 files changed, 19 insertions, 20 deletions

diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig
index 783da855a2e3..d6d35b2e5fe8 100644
--- a/arch/mips/configs/bigsur_defconfig
+++ b/arch/mips/configs/bigsur_defconfig
@@ -963,7 +963,7 @@ CONFIG_EEPROM_LEGACY=y
 CONFIG_SENSORS_PCF8574=y
 # CONFIG_PCF8575 is not set
 CONFIG_SENSORS_PCF8591=y
-CONFIG_SENSORS_MAX6875=y
+CONFIG_EEPROM_MAX6875=y
 # CONFIG_SENSORS_TSL2550 is not set
 CONFIG_I2C_DEBUG_CORE=y
 CONFIG_I2C_DEBUG_ALGO=y
diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig
index 8426d3b9501c..fadb351d249b 100644
--- a/arch/mips/configs/mtx1_defconfig
+++ b/arch/mips/configs/mtx1_defconfig
@@ -1849,7 +1849,7 @@ CONFIG_EEPROM_LEGACY=m
 CONFIG_SENSORS_PCF8574=m
 CONFIG_SENSORS_PCA9539=m
 CONFIG_SENSORS_PCF8591=m
-CONFIG_SENSORS_MAX6875=m
+CONFIG_EEPROM_MAX6875=m
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
diff --git a/arch/powerpc/configs/ppc6xx_defconfig b/arch/powerpc/configs/ppc6xx_defconfig
index 7d044dfd9236..12dc7c409616 100644
--- a/arch/powerpc/configs/ppc6xx_defconfig
+++ b/arch/powerpc/configs/ppc6xx_defconfig
@@ -1808,7 +1808,7 @@ CONFIG_PCF8575=m
 CONFIG_SENSORS_PCA9539=m
 CONFIG_SENSORS_PCF8591=m
 # CONFIG_TPS65010 is not set
-CONFIG_SENSORS_MAX6875=m
+CONFIG_EEPROM_MAX6875=m
 CONFIG_SENSORS_TSL2550=m
 CONFIG_MCU_MPC8349EMITX=m
 # CONFIG_I2C_DEBUG_CORE is not set
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
index 8f8c81eb0aee..02d746c9c474 100644
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
@@ -64,21 +64,6 @@ config SENSORS_PCA9539
           This driver is deprecated and will be dropped soon. Use
           drivers/gpio/pca953x.c instead.
 
-config SENSORS_MAX6875
-        tristate "Maxim MAX6875 Power supply supervisor"
-        depends on EXPERIMENTAL
-        help
-          If you say yes here you get support for the Maxim MAX6875
-          EEPROM-programmable, quad power-supply sequencer/supervisor.
-
-          This provides an interface to program the EEPROM and reset the chip.
-
-          This driver also supports the Maxim MAX6874 hex power-supply
-          sequencer/supervisor if found at a compatible address.
-
-          This driver can also be built as a module.  If so, the module
-          will be called max6875.
-
 config SENSORS_TSL2550
         tristate "Taos TSL2550 ambient light sensor"
         depends on EXPERIMENTAL
diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile
index 55a376037183..f4680d16ee34 100644
--- a/drivers/i2c/chips/Makefile
+++ b/drivers/i2c/chips/Makefile
@@ -11,7 +11,6 @@
 #
 
 obj-$(CONFIG_DS1682)            += ds1682.o
-obj-$(CONFIG_SENSORS_MAX6875)   += max6875.o
 obj-$(CONFIG_SENSORS_PCA9539)   += pca9539.o
 obj-$(CONFIG_SENSORS_PCF8574)   += pcf8574.o
 obj-$(CONFIG_PCF8575)           += pcf8575.o
diff --git a/drivers/misc/eeprom/Kconfig b/drivers/misc/eeprom/Kconfig
index 89fec052f3b4..9118613af321 100644
--- a/drivers/misc/eeprom/Kconfig
+++ b/drivers/misc/eeprom/Kconfig
@@ -48,6 +48,20 @@ config EEPROM_LEGACY
           This driver can also be built as a module.  If so, the module
           will be called eeprom.
 
+config EEPROM_MAX6875
+        tristate "Maxim MAX6874/5 power supply supervisor"
+        depends on I2C && EXPERIMENTAL
+        help
+          If you say yes here you get read-only support for the user EEPROM of
+          the Maxim MAX6874/5 EEPROM-programmable, quad power-supply
+          sequencer/supervisor.
+
+          All other features of this chip should be accessed via i2c-dev.
+
+          This driver can also be built as a module.  If so, the module
+          will be called max6875.
+
+
 config EEPROM_93CX6
         tristate "EEPROM 93CX6 support"
         help
diff --git a/drivers/misc/eeprom/Makefile b/drivers/misc/eeprom/Makefile
index 539dd8f88128..df3d68ffa9d1 100644
--- a/drivers/misc/eeprom/Makefile
+++ b/drivers/misc/eeprom/Makefile
@@ -1,4 +1,5 @@
 obj-$(CONFIG_EEPROM_AT24)       += at24.o
 obj-$(CONFIG_EEPROM_AT25)       += at25.o
 obj-$(CONFIG_EEPROM_LEGACY)     += eeprom.o
+obj-$(CONFIG_EEPROM_MAX6875)    += max6875.o
 obj-$(CONFIG_EEPROM_93CX6)      += eeprom_93cx6.o
diff --git a/drivers/i2c/chips/max6875.c b/drivers/misc/eeprom/max6875.c
index 033d9d81ec8a..3c0c58eed347 100644
--- a/drivers/i2c/chips/max6875.c
+++ b/drivers/misc/eeprom/max6875.c
@@ -3,7 +3,7 @@
 
     Copyright (C) 2005 Ben Gardner <bgardner@wabtec.com>
 
-    Based on i2c/chips/eeprom.c
+    Based on eeprom.c
 
     The MAX6875 has a bank of registers and two banks of EEPROM.
     Address ranges are defined as follows: