aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/powerpc/sysdev/Makefile1
-rw-r--r--arch/powerpc/sysdev/tsi108_dev.c145
-rw-r--r--arch/powerpc/sysdev/tsi108_pci.c412
-rw-r--r--include/asm-powerpc/tsi108.h109
4 files changed, 667 insertions, 0 deletions
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index cef95b023730..63e81e74b45e 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -12,3 +12,4 @@ obj-$(CONFIG_U3_DART) += dart_iommu.o
12obj-$(CONFIG_MMIO_NVRAM) += mmio_nvram.o 12obj-$(CONFIG_MMIO_NVRAM) += mmio_nvram.o
13obj-$(CONFIG_PPC_83xx) += ipic.o 13obj-$(CONFIG_PPC_83xx) += ipic.o
14obj-$(CONFIG_FSL_SOC) += fsl_soc.o 14obj-$(CONFIG_FSL_SOC) += fsl_soc.o
15obj-$(CONFIG_TSI108_BRIDGE) += tsi108_pci.o tsi108_dev.o
diff --git a/arch/powerpc/sysdev/tsi108_dev.c b/arch/powerpc/sysdev/tsi108_dev.c
new file mode 100644
index 000000000000..26a0cc820cde
--- /dev/null
+++ b/arch/powerpc/sysdev/tsi108_dev.c
@@ -0,0 +1,145 @@
1/*
2 * tsi108/109 device setup code
3 *
4 * Maintained by Roy Zang < tie-fei.zang@freescale.com >
5 *
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License as published by the
8 * Free Software Foundation; either version 2 of the License, or (at your
9 * option) any later version.
10 */
11
12#include <linux/config.h>
13#include <linux/stddef.h>
14#include <linux/kernel.h>
15#include <linux/init.h>
16#include <linux/errno.h>
17#include <linux/major.h>
18#include <linux/delay.h>
19#include <linux/irq.h>
20#include <linux/module.h>
21#include <linux/device.h>
22#include <linux/platform_device.h>
23#include <asm/tsi108.h>
24
25#include <asm/system.h>
26#include <asm/atomic.h>
27#include <asm/io.h>
28#include <asm/irq.h>
29#include <asm/prom.h>
30#include <mm/mmu_decl.h>
31
32#undef DEBUG
33
34#ifdef DEBUG
35#define DBG(fmt...) do { printk(fmt); } while(0)
36#else
37#define DBG(fmt...) do { } while(0)
38#endif
39
40static phys_addr_t tsi108_csr_base = -1;
41
42phys_addr_t get_csrbase(void)
43{
44 struct device_node *tsi;
45
46 if (tsi108_csr_base != -1)
47 return tsi108_csr_base;
48
49 tsi = of_find_node_by_type(NULL, "tsi-bridge");
50 if (tsi) {
51 unsigned int size;
52 void *prop = get_property(tsi, "reg", &size);
53 tsi108_csr_base = of_translate_address(tsi, prop);
54 of_node_put(tsi);
55 };
56 return tsi108_csr_base;
57}
58
59u32 get_vir_csrbase(void)
60{
61 return (u32) (ioremap(get_csrbase(), 0x10000));
62}
63
64EXPORT_SYMBOL(get_csrbase);
65EXPORT_SYMBOL(get_vir_csrbase);
66
67static int __init tsi108_eth_of_init(void)
68{
69 struct device_node *np;
70 unsigned int i;
71 struct platform_device *tsi_eth_dev;
72 struct resource res;
73 int ret;
74
75 for (np = NULL, i = 0;
76 (np = of_find_compatible_node(np, "network", "tsi-ethernet")) != NULL;
77 i++) {
78 struct resource r[2];
79 struct device_node *phy;
80 hw_info tsi_eth_data;
81 unsigned int *id;
82 unsigned int *phy_id;
83 void *mac_addr;
84 phandle *ph;
85
86 memset(r, 0, sizeof(r));
87 memset(&tsi_eth_data, 0, sizeof(tsi_eth_data));
88
89 ret = of_address_to_resource(np, 0, &r[0]);
90 DBG("%s: name:start->end = %s:0x%lx-> 0x%lx\n",
91 __FUNCTION__,r[0].name, r[0].start, r[0].end);
92 if (ret)
93 goto err;
94
95 r[1].name = "tx";
96 r[1].start = np->intrs[0].line;
97 r[1].end = np->intrs[0].line;
98 r[1].flags = IORESOURCE_IRQ;
99
100 tsi_eth_dev =
101 platform_device_register_simple("tsi-ethernet", i, &r[0],
102 np->n_intrs + 1);
103
104 if (IS_ERR(tsi_eth_dev)) {
105 ret = PTR_ERR(tsi_eth_dev);
106 goto err;
107 }
108
109 mac_addr = get_property(np, "address", NULL);
110 memcpy(tsi_eth_data.mac_addr, mac_addr, 6);
111
112 ph = (phandle *) get_property(np, "phy-handle", NULL);
113 phy = of_find_node_by_phandle(*ph);
114
115 if (phy == NULL) {
116 ret = -ENODEV;
117 goto unreg;
118 }
119
120 id = (u32 *) get_property(phy, "reg", NULL);
121 phy_id = (u32 *) get_property(phy, "phy-id", NULL);
122 ret = of_address_to_resource(phy, 0, &res);
123 if (ret) {
124 of_node_put(phy);
125 goto unreg;
126 }
127 tsi_eth_data.regs = r[0].start;
128 tsi_eth_data.phyregs = res.start;
129 tsi_eth_data.phy = *phy_id;
130 tsi_eth_data.irq_num = np->intrs[0].line;
131 of_node_put(phy);
132 ret =
133 platform_device_add_data(tsi_eth_dev, &tsi_eth_data,
134 sizeof(hw_info));
135 if (ret)
136 goto unreg;
137 }
138 return 0;
139unreg:
140 platform_device_unregister(tsi_eth_dev);
141err:
142 return ret;
143}
144
145arch_initcall(tsi108_eth_of_init);
diff --git a/arch/powerpc/sysdev/tsi108_pci.c b/arch/powerpc/sysdev/tsi108_pci.c
new file mode 100644
index 000000000000..3265d54c82ed
--- /dev/null
+++ b/arch/powerpc/sysdev/tsi108_pci.c
@@ -0,0 +1,412 @@
1/*
2 * Common routines for Tundra Semiconductor TSI108 host bridge.
3 *
4 * 2004-2005 (c) Tundra Semiconductor Corp.
5 * Author: Alex Bounine (alexandreb@tundra.com)
6 *
7 * This program is free software; you can redistribute it and/or modify it
8 * under the terms of the GNU General Public License as published by the Free
9 * Software Foundation; either version 2 of the License, or (at your option)
10 * any later version.
11 *
12 * This program is distributed in the hope that it will be useful, but WITHOUT
13 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
14 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
15 * more details.
16 *
17 * You should have received a copy of the GNU General Public License along with
18 * this program; if not, write to the Free Software Foundation, Inc., 59
19 * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
20 */
21
22#include <linux/kernel.h>
23#include <linux/init.h>
24#include <linux/pci.h>
25#include <linux/slab.h>
26#include <linux/irq.h>
27#include <linux/interrupt.h>
28
29
30#include <asm/byteorder.h>
31#include <asm/io.h>
32#include <asm/irq.h>
33#include <asm/uaccess.h>
34#include <asm/machdep.h>
35#include <asm/pci-bridge.h>
36#include <asm/tsi108.h>
37#include <asm/tsi108_irq.h>
38#include <asm/prom.h>
39
40#undef DEBUG
41#ifdef DEBUG
42#define DBG(x...) printk(x)
43#else
44#define DBG(x...)
45#endif
46
47#define tsi_mk_config_addr(bus, devfunc, offset) \
48 ((((bus)<<16) | ((devfunc)<<8) | (offset & 0xfc)) + tsi108_pci_cfg_base)
49
50u32 tsi108_pci_cfg_base;
51u32 tsi108_csr_vir_base;
52
53extern u32 get_vir_csrbase(void);
54extern u32 tsi108_read_reg(u32 reg_offset);
55extern void tsi108_write_reg(u32 reg_offset, u32 val);
56
57int
58tsi108_direct_write_config(struct pci_bus *bus, unsigned int devfunc,
59 int offset, int len, u32 val)
60{
61 volatile unsigned char *cfg_addr;
62
63 if (ppc_md.pci_exclude_device)
64 if (ppc_md.pci_exclude_device(bus->number, devfunc))
65 return PCIBIOS_DEVICE_NOT_FOUND;
66
67 cfg_addr = (unsigned char *)(tsi_mk_config_addr(bus->number,
68 devfunc, offset) |
69 (offset & 0x03));
70
71#ifdef DEBUG
72 printk("PCI CFG write : ");
73 printk("%d:0x%x:0x%x ", bus->number, devfunc, offset);
74 printk("%d ADDR=0x%08x ", len, (uint) cfg_addr);
75 printk("data = 0x%08x\n", val);
76#endif
77
78 switch (len) {
79 case 1:
80 out_8((u8 *) cfg_addr, val);
81 break;
82 case 2:
83 out_le16((u16 *) cfg_addr, val);
84 break;
85 default:
86 out_le32((u32 *) cfg_addr, val);
87 break;
88 }
89
90 return PCIBIOS_SUCCESSFUL;
91}
92
93void tsi108_clear_pci_error(u32 pci_cfg_base)
94{
95 u32 err_stat, err_addr, pci_stat;
96
97 /*
98 * Quietly clear PB and PCI error flags set as result
99 * of PCI/X configuration read requests.
100 */
101
102 /* Read PB Error Log Registers */
103
104 err_stat = tsi108_read_reg(TSI108_PB_OFFSET + TSI108_PB_ERRCS);
105 err_addr = tsi108_read_reg(TSI108_PB_OFFSET + TSI108_PB_AERR);
106
107 if (err_stat & TSI108_PB_ERRCS_ES) {
108 /* Clear error flag */
109 tsi108_write_reg(TSI108_PB_OFFSET + TSI108_PB_ERRCS,
110 TSI108_PB_ERRCS_ES);
111
112 /* Clear read error reported in PB_ISR */
113 tsi108_write_reg(TSI108_PB_OFFSET + TSI108_PB_ISR,
114 TSI108_PB_ISR_PBS_RD_ERR);
115
116 /* Clear PCI/X bus cfg errors if applicable */
117 if ((err_addr & 0xFF000000) == pci_cfg_base) {
118 pci_stat =
119 tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_CSR);
120 tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_CSR,
121 pci_stat);
122 }
123 }
124
125 return;
126}
127
128#define __tsi108_read_pci_config(x, addr, op) \
129 __asm__ __volatile__( \
130 " "op" %0,0,%1\n" \
131 "1: eieio\n" \
132 "2:\n" \
133 ".section .fixup,\"ax\"\n" \
134 "3: li %0,-1\n" \
135 " b 2b\n" \
136 ".section __ex_table,\"a\"\n" \
137 " .align 2\n" \
138 " .long 1b,3b\n" \
139 ".text" \
140 : "=r"(x) : "r"(addr))
141
142int
143tsi108_direct_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
144 int len, u32 * val)
145{
146 volatile unsigned char *cfg_addr;
147 u32 temp;
148
149 if (ppc_md.pci_exclude_device)
150 if (ppc_md.pci_exclude_device(bus->number, devfn))
151 return PCIBIOS_DEVICE_NOT_FOUND;
152
153 cfg_addr = (unsigned char *)(tsi_mk_config_addr(bus->number,
154 devfn,
155 offset) | (offset &
156 0x03));
157
158 switch (len) {
159 case 1:
160 __tsi108_read_pci_config(temp, cfg_addr, "lbzx");
161 break;
162 case 2:
163 __tsi108_read_pci_config(temp, cfg_addr, "lhbrx");
164 break;
165 default:
166 __tsi108_read_pci_config(temp, cfg_addr, "lwbrx");
167 break;
168 }
169
170 *val = temp;
171
172#ifdef DEBUG
173 if ((0xFFFFFFFF != temp) && (0xFFFF != temp) && (0xFF != temp)) {
174 printk("PCI CFG read : ");
175 printk("%d:0x%x:0x%x ", bus->number, devfn, offset);
176 printk("%d ADDR=0x%08x ", len, (uint) cfg_addr);
177 printk("data = 0x%x\n", *val);
178 }
179#endif
180 return PCIBIOS_SUCCESSFUL;
181}
182
183void tsi108_clear_pci_cfg_error(void)
184{
185 tsi108_clear_pci_error(TSI108_PCI_CFG_BASE_PHYS);
186}
187
188static struct pci_ops tsi108_direct_pci_ops = {
189 tsi108_direct_read_config,
190 tsi108_direct_write_config
191};
192
193int __init tsi108_setup_pci(struct device_node *dev)
194{
195 int len;
196 struct pci_controller *hose;
197 struct resource rsrc;
198 int *bus_range;
199 int primary = 0, has_address = 0;
200
201 /* PCI Config mapping */
202 tsi108_pci_cfg_base = (u32)ioremap(TSI108_PCI_CFG_BASE_PHYS,
203 TSI108_PCI_CFG_SIZE);
204 DBG("TSI_PCI: %s tsi108_pci_cfg_base=0x%x\n", __FUNCTION__,
205 tsi108_pci_cfg_base);
206
207 /* Fetch host bridge registers address */
208 has_address = (of_address_to_resource(dev, 0, &rsrc) == 0);
209
210 /* Get bus range if any */
211 bus_range = (int *)get_property(dev, "bus-range", &len);
212 if (bus_range == NULL || len < 2 * sizeof(int)) {
213 printk(KERN_WARNING "Can't get bus-range for %s, assume"
214 " bus 0\n", dev->full_name);
215 }
216
217 hose = pcibios_alloc_controller();
218
219 if (!hose) {
220 printk("PCI Host bridge init failed\n");
221 return -ENOMEM;
222 }
223 hose->arch_data = dev;
224 hose->set_cfg_type = 1;
225
226 hose->first_busno = bus_range ? bus_range[0] : 0;
227 hose->last_busno = bus_range ? bus_range[1] : 0xff;
228
229 (hose)->ops = &tsi108_direct_pci_ops;
230
231 printk(KERN_INFO "Found tsi108 PCI host bridge at 0x%08lx. "
232 "Firmware bus number: %d->%d\n",
233 rsrc.start, hose->first_busno, hose->last_busno);
234
235 /* Interpret the "ranges" property */
236 /* This also maps the I/O region and sets isa_io/mem_base */
237 pci_process_bridge_OF_ranges(hose, dev, primary);
238 return 0;
239}
240
241/*
242 * Low level utility functions
243 */
244
245static void tsi108_pci_int_mask(u_int irq)
246{
247 u_int irp_cfg;
248 int int_line = (irq - IRQ_PCI_INTAD_BASE);
249
250 irp_cfg = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL);
251 mb();
252 irp_cfg |= (1 << int_line); /* INTx_DIR = output */
253 irp_cfg &= ~(3 << (8 + (int_line * 2))); /* INTx_TYPE = unused */
254 tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL, irp_cfg);
255 mb();
256 irp_cfg = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL);
257}
258
259static void tsi108_pci_int_unmask(u_int irq)
260{
261 u_int irp_cfg;
262 int int_line = (irq - IRQ_PCI_INTAD_BASE);
263
264 irp_cfg = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL);
265 mb();
266 irp_cfg &= ~(1 << int_line);
267 irp_cfg |= (3 << (8 + (int_line * 2)));
268 tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL, irp_cfg);
269 mb();
270}
271
272static void init_pci_source(void)
273{
274 tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL,
275 0x0000ff00);
276 tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE,
277 TSI108_PCI_IRP_ENABLE_P_INT);
278 mb();
279}
280
281static inline int get_pci_source(void)
282{
283 u_int temp = 0;
284 int irq = -1;
285 int i;
286 u_int pci_irp_stat;
287 static int mask = 0;
288
289 /* Read PCI/X block interrupt status register */
290 pci_irp_stat = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_STAT);
291 mb();
292
293 if (pci_irp_stat & TSI108_PCI_IRP_STAT_P_INT) {
294 /* Process Interrupt from PCI bus INTA# - INTD# lines */
295 temp =
296 tsi108_read_reg(TSI108_PCI_OFFSET +
297 TSI108_PCI_IRP_INTAD) & 0xf;
298 mb();
299 for (i = 0; i < 4; i++, mask++) {
300 if (temp & (1 << mask % 4)) {
301 irq = IRQ_PCI_INTA + mask % 4;
302 mask++;
303 break;
304 }
305 }
306
307 /* Disable interrupts from PCI block */
308 temp = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE);
309 tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE,
310 temp & ~TSI108_PCI_IRP_ENABLE_P_INT);
311 mb();
312 (void)tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE);
313 mb();
314 }
315#ifdef DEBUG
316 else {
317 printk("TSI108_PIC: error in TSI108_PCI_IRP_STAT\n");
318 pci_irp_stat =
319 tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_STAT);
320 temp =
321 tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_INTAD);
322 mb();
323 printk(">> stat=0x%08x intad=0x%08x ", pci_irp_stat, temp);
324 temp =
325 tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL);
326 mb();
327 printk("cfg_ctl=0x%08x ", temp);
328 temp =
329 tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE);
330 mb();
331 printk("irp_enable=0x%08x\n", temp);
332 }
333#endif /* end of DEBUG */
334
335 return irq;
336}
337
338
339/*
340 * Linux descriptor level callbacks
341 */
342
343static void tsi108_pci_irq_enable(u_int irq)
344{
345 tsi108_pci_int_unmask(irq);
346}
347
348static void tsi108_pci_irq_disable(u_int irq)
349{
350 tsi108_pci_int_mask(irq);
351}
352
353static void tsi108_pci_irq_ack(u_int irq)
354{
355 tsi108_pci_int_mask(irq);
356}
357
358static void tsi108_pci_irq_end(u_int irq)
359{
360 tsi108_pci_int_unmask(irq);
361
362 /* Enable interrupts from PCI block */
363 tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE,
364 tsi108_read_reg(TSI108_PCI_OFFSET +
365 TSI108_PCI_IRP_ENABLE) |
366 TSI108_PCI_IRP_ENABLE_P_INT);
367 mb();
368}
369
370/*
371 * Interrupt controller descriptor for cascaded PCI interrupt controller.
372 */
373
374struct hw_interrupt_type tsi108_pci_irq = {
375 .typename = "tsi108_PCI_int",
376 .enable = tsi108_pci_irq_enable,
377 .disable = tsi108_pci_irq_disable,
378 .ack = tsi108_pci_irq_ack,
379 .end = tsi108_pci_irq_end,
380};
381
382/*
383 * Exported functions
384 */
385
386/*
387 * The Tsi108 PCI interrupts initialization routine.
388 *
389 * The INTA# - INTD# interrupts on the PCI bus are reported by the PCI block
390 * to the MPIC using single interrupt source (IRQ_TSI108_PCI). Therefore the
391 * PCI block has to be treated as a cascaded interrupt controller connected
392 * to the MPIC.
393 */
394
395void __init tsi108_pci_int_init(void)
396{
397 u_int i;
398
399 DBG("Tsi108_pci_int_init: initializing PCI interrupts\n");
400
401 for (i = 0; i < NUM_PCI_IRQS; i++) {
402 irq_desc[i + IRQ_PCI_INTAD_BASE].handler = &tsi108_pci_irq;
403 irq_desc[i + IRQ_PCI_INTAD_BASE].status |= IRQ_LEVEL;
404 }
405
406 init_pci_source();
407}
408
409int tsi108_irq_cascade(struct pt_regs *regs, void *unused)
410{
411 return get_pci_source();
412}
diff --git a/include/asm-powerpc/tsi108.h b/include/asm-powerpc/tsi108.h
new file mode 100644
index 000000000000..c4c278d72f71
--- /dev/null
+++ b/include/asm-powerpc/tsi108.h
@@ -0,0 +1,109 @@
1/*
2 * include/asm-ppc/tsi108.h
3 *
4 * common routine and memory layout for Tundra TSI108(Grendel) host bridge
5 * memory controller.
6 *
7 * Author: Jacob Pan (jacob.pan@freescale.com)
8 * Alex Bounine (alexandreb@tundra.com)
9 * 2004 (c) Freescale Semiconductor Inc. This file is licensed under
10 * the terms of the GNU General Public License version 2. This program
11 * is licensed "as is" without any warranty of any kind, whether express
12 * or implied.
13 */
14#ifndef __PPC_KERNEL_TSI108_H
15#define __PPC_KERNEL_TSI108_H
16
17#include <asm/pci-bridge.h>
18
19/* Size of entire register space */
20#define TSI108_REG_SIZE (0x10000)
21
22/* Sizes of register spaces for individual blocks */
23#define TSI108_HLP_SIZE 0x1000
24#define TSI108_PCI_SIZE 0x1000
25#define TSI108_CLK_SIZE 0x1000
26#define TSI108_PB_SIZE 0x1000
27#define TSI108_SD_SIZE 0x1000
28#define TSI108_DMA_SIZE 0x1000
29#define TSI108_ETH_SIZE 0x1000
30#define TSI108_I2C_SIZE 0x400
31#define TSI108_MPIC_SIZE 0x400
32#define TSI108_UART0_SIZE 0x200
33#define TSI108_GPIO_SIZE 0x200
34#define TSI108_UART1_SIZE 0x200
35
36/* Offsets within Tsi108(A) CSR space for individual blocks */
37#define TSI108_HLP_OFFSET 0x0000
38#define TSI108_PCI_OFFSET 0x1000
39#define TSI108_CLK_OFFSET 0x2000
40#define TSI108_PB_OFFSET 0x3000
41#define TSI108_SD_OFFSET 0x4000
42#define TSI108_DMA_OFFSET 0x5000
43#define TSI108_ETH_OFFSET 0x6000
44#define TSI108_I2C_OFFSET 0x7000
45#define TSI108_MPIC_OFFSET 0x7400
46#define TSI108_UART0_OFFSET 0x7800
47#define TSI108_GPIO_OFFSET 0x7A00
48#define TSI108_UART1_OFFSET 0x7C00
49
50/* Tsi108 registers used by common code components */
51#define TSI108_PCI_CSR (0x004)
52#define TSI108_PCI_IRP_CFG_CTL (0x180)
53#define TSI108_PCI_IRP_STAT (0x184)
54#define TSI108_PCI_IRP_ENABLE (0x188)
55#define TSI108_PCI_IRP_INTAD (0x18C)
56
57#define TSI108_PCI_IRP_STAT_P_INT (0x00400000)
58#define TSI108_PCI_IRP_ENABLE_P_INT (0x00400000)
59
60#define TSI108_CG_PWRUP_STATUS (0x234)
61
62#define TSI108_PB_ISR (0x00C)
63#define TSI108_PB_ERRCS (0x404)
64#define TSI108_PB_AERR (0x408)
65
66#define TSI108_PB_ERRCS_ES (1 << 1)
67#define TSI108_PB_ISR_PBS_RD_ERR (1 << 8)
68
69#define TSI108_PCI_CFG_BASE_PHYS (0xfb000000)
70#define TSI108_PCI_CFG_SIZE (0x01000000)
71/* Global variables */
72
73extern u32 tsi108_pci_cfg_base;
74/* Exported functions */
75
76extern int tsi108_bridge_init(struct pci_controller *hose, uint phys_csr_base);
77extern unsigned long tsi108_get_mem_size(void);
78extern unsigned long tsi108_get_cpu_clk(void);
79extern unsigned long tsi108_get_sdc_clk(void);
80extern int tsi108_direct_write_config(struct pci_bus *bus, unsigned int devfn,
81 int offset, int len, u32 val);
82extern int tsi108_direct_read_config(struct pci_bus *bus, unsigned int devfn,
83 int offset, int len, u32 * val);
84extern void tsi108_clear_pci_error(u32 pci_cfg_base);
85
86extern phys_addr_t get_csrbase(void);
87
88typedef struct {
89 u32 regs; /* hw registers base address */
90 u32 phyregs; /* phy registers base address */
91 u16 phy; /* phy address */
92 u16 irq_num; /* irq number */
93 u8 mac_addr[6]; /* phy mac address */
94} hw_info;
95
96extern u32 get_vir_csrbase(void);
97extern u32 tsi108_csr_vir_base;
98
99extern inline u32 tsi108_read_reg(u32 reg_offset)
100{
101 return in_be32((volatile u32 *)(tsi108_csr_vir_base + reg_offset));
102}
103
104extern inline void tsi108_write_reg(u32 reg_offset, u32 val)
105{
106 out_be32((volatile u32 *)(tsi108_csr_vir_base + reg_offset), val);
107}
108
109#endif /* __PPC_KERNEL_TSI108_H */
generated by cgit v1.2.2 (git 2.25.0) at 2025-01-02 10:39:26 -0500