15 files changed, 132 insertions, 95 deletions

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 4d880b3d1f35..62aab585d9d7 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -462,13 +462,20 @@ and is between 256 and 4096 characters. It is defined in the file
                         Documentation/networking/netconsole.txt for an
                         alternative.
 
-                uart,io,<addr>[,options]
-                uart,mmio,<addr>[,options]
+                uart[8250],io,<addr>[,options]
+                uart[8250],mmio,<addr>[,options]
                         Start an early, polled-mode console on the 8250/16550
                         UART at the specified I/O port or MMIO address,
                         switching to the matching ttyS device later.  The
                         options are the same as for ttyS, above.
 
+        earlycon=       [KNL] Output early console device and options.
+                uart[8250],io,<addr>[,options]
+                uart[8250],mmio,<addr>[,options]
+                        Start an early, polled-mode console on the 8250/16550
+                        UART at the specified I/O port or MMIO address.
+                        The options are the same as for ttyS, above.
+
         cpcihp_generic= [HW,PCI] Generic port I/O CompactPCI driver
                         Format:
                         <first_slot>,<last_slot>,<port>,<enum_bit>[,<debug>]
diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c
index 188fb73c6845..4d9864cc92c9 100644
--- a/arch/ia64/kernel/setup.c
+++ b/arch/ia64/kernel/setup.c
@@ -390,10 +390,6 @@ early_console_setup (char *cmdline)
         if (!efi_setup_pcdp_console(cmdline))
                 earlycons++;
 #endif
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-        if (!early_serial_console_init(cmdline))
-                earlycons++;
-#endif
 
         return (earlycons) ? 0 : -1;
 }
diff --git a/drivers/firmware/pcdp.c b/drivers/firmware/pcdp.c
index 2b4b76e8bd72..58e9f8e457f8 100644
--- a/drivers/firmware/pcdp.c
+++ b/drivers/firmware/pcdp.c
@@ -15,6 +15,7 @@
 #include <linux/console.h>
 #include <linux/efi.h>
 #include <linux/serial.h>
+#include <linux/serial_8250.h>
 #include <asm/vga.h>
 #include "pcdp.h"
 
@@ -27,7 +28,7 @@ setup_serial_console(struct pcdp_uart *uart)
         char parity;
 
         mmio = (uart->addr.space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY);
-        p += sprintf(p, "console=uart,%s,0x%lx",
+        p += sprintf(p, "uart8250,%s,0x%lx",
                 mmio ? "mmio" : "io", uart->addr.address);
         if (uart->baud) {
                 p += sprintf(p, ",%lu", uart->baud);
@@ -41,7 +42,8 @@ setup_serial_console(struct pcdp_uart *uart)
                 }
         }
 
-        return early_serial_console_init(options);
+        add_preferred_console("uart", 8250, &options[9]);
+        return setup_early_serial8250_console(options);
 #else
         return -ENODEV;
 #endif
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index c84dab083a85..0b3ec38ae614 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -2514,12 +2514,18 @@ static int __init serial8250_console_setup(struct console *co, char *options)
         return uart_set_options(port, co, baud, parity, bits, flow);
 }
 
+static int __init serial8250_console_early_setup(void)
+{
+        return serial8250_find_port_for_earlycon();
+}
+
 static struct uart_driver serial8250_reg;
 static struct console serial8250_console = {
         .name           = "ttyS",
         .write          = serial8250_console_write,
         .device         = uart_console_device,
         .setup          = serial8250_console_setup,
+        .early_setup    = serial8250_console_early_setup,
         .flags          = CON_PRINTBUFFER,
         .index          = -1,
         .data           = &serial8250_reg,
@@ -2533,7 +2539,7 @@ static int __init serial8250_console_init(void)
 }
 console_initcall(serial8250_console_init);
 
-static int __init find_port(struct uart_port *p)
+int serial8250_find_port(struct uart_port *p)
 {
         int line;
         struct uart_port *port;
@@ -2546,26 +2552,6 @@ static int __init find_port(struct uart_port *p)
         return -ENODEV;
 }
 
-int __init serial8250_start_console(struct uart_port *port, char *options)
-{
-        int line;
-
-        line = find_port(port);
-        if (line < 0)
-                return -ENODEV;
-
-        add_preferred_console("ttyS", line, options);
-        printk("Adding console on ttyS%d at %s 0x%lx (options '%s')\n",
-                line, port->iotype == UPIO_MEM ? "MMIO" : "I/O port",
-                port->iotype == UPIO_MEM ? (unsigned long) port->mapbase :
-                    (unsigned long) port->iobase, options);
-        if (!(serial8250_console.flags & CON_ENABLED)) {
-                serial8250_console.flags &= ~CON_PRINTBUFFER;
-                register_console(&serial8250_console);
-        }
-        return line;
-}
-
 #define SERIAL8250_CONSOLE      &serial8250_console
 #else
 #define SERIAL8250_CONSOLE      NULL
diff --git a/drivers/serial/8250_early.c b/drivers/serial/8250_early.c
index 7e511199b4c5..947c20507e1f 100644
--- a/drivers/serial/8250_early.c
+++ b/drivers/serial/8250_early.c
@@ -17,13 +17,11 @@
  * we locate the device directly by its MMIO or I/O port address.
  *
  * The user can specify the device directly, e.g.,
- *      console=uart,io,0x3f8,9600n8
- *      console=uart,mmio,0xff5e0000,115200n8
- * or platform code can call early_uart_console_init() to set
- * the early UART device.
- *
- * After the normal serial driver starts, we try to locate the
- * matching ttyS device and start a console there.
+ *      earlycon=uart8250,io,0x3f8,9600n8
+ *      earlycon=uart8250,mmio,0xff5e0000,115200n8
+ * or
+ *      console=uart8250,io,0x3f8,9600n8
+ *      console=uart8250,mmio,0xff5e0000,115200n8
  */
 
 #include <linux/tty.h>
@@ -32,17 +30,21 @@
 #include <linux/serial_core.h>
 #include <linux/serial_reg.h>
 #include <linux/serial.h>
+#include <linux/serial_8250.h>
 #include <asm/io.h>
 #include <asm/serial.h>
+#ifdef CONFIG_FIX_EARLYCON_MEM
+#include <asm/pgtable.h>
+#include <asm/fixmap.h>
+#endif
 
-struct early_uart_device {
+struct early_serial8250_device {
         struct uart_port port;
         char options[16];               /* e.g., 115200n8 */
         unsigned int baud;
 };
 
-static struct early_uart_device early_device __initdata;
-static int early_uart_registered __initdata;
+static struct early_serial8250_device early_device;
 
 static unsigned int __init serial_in(struct uart_port *port, int offset)
 {
@@ -80,7 +82,7 @@ static void __init putc(struct uart_port *port, int c)
         serial_out(port, UART_TX, c);
 }
 
-static void __init early_uart_write(struct console *console, const char *s, unsigned int count)
+static void __init early_serial8250_write(struct console *console, const char *s, unsigned int count)
 {
         struct uart_port *port = &early_device.port;
         unsigned int ier;
@@ -111,7 +113,7 @@ static unsigned int __init probe_baud(struct uart_port *port)
         return (port->uartclk / 16) / quot;
 }
 
-static void __init init_port(struct early_uart_device *device)
+static void __init init_port(struct early_serial8250_device *device)
 {
         struct uart_port *port = &device->port;
         unsigned int divisor;
@@ -130,10 +132,9 @@ static void __init init_port(struct early_uart_device *device)
         serial_out(port, UART_LCR, c & ~UART_LCR_DLAB);
 }
 
-static int __init parse_options(struct early_uart_device *device, char *options)
+static int __init parse_options(struct early_serial8250_device *device, char *options)
 {
         struct uart_port *port = &device->port;
-        int mapsize = 64;
         int mmio, length;
 
         if (!options)
@@ -143,12 +144,18 @@ static int __init parse_options(struct early_uart_device *device, char *options)
         if (!strncmp(options, "mmio,", 5)) {
                 port->iotype = UPIO_MEM;
                 port->mapbase = simple_strtoul(options + 5, &options, 0);
-                port->membase = ioremap(port->mapbase, mapsize);
+#ifdef CONFIG_FIX_EARLYCON_MEM
+                set_fixmap_nocache(FIX_EARLYCON_MEM_BASE, port->mapbase & PAGE_MASK);
+                port->membase = (void __iomem *)__fix_to_virt(FIX_EARLYCON_MEM_BASE);
+                port->membase += port->mapbase & ~PAGE_MASK;
+#else
+                port->membase = ioremap(port->mapbase, 64);
                 if (!port->membase) {
                         printk(KERN_ERR "%s: Couldn't ioremap 0x%lx\n",
                                 __FUNCTION__, port->mapbase);
                         return -ENOMEM;
                 }
+#endif
                 mmio = 1;
         } else if (!strncmp(options, "io,", 3)) {
                 port->iotype = UPIO_PORT;
@@ -175,9 +182,16 @@ static int __init parse_options(struct early_uart_device *device, char *options)
         return 0;
 }
 
-static int __init early_uart_setup(struct console *console, char *options)
+static struct console early_serial8250_console __initdata = {
+        .name   = "uart",
+        .write  = early_serial8250_write,
+        .flags  = CON_PRINTBUFFER | CON_BOOT,
+        .index  = -1,
+};
+
+static int __init early_serial8250_setup(char *options)
 {
-        struct early_uart_device *device = &early_device;
+        struct early_serial8250_device *device = &early_device;
         int err;
 
         if (device->port.membase || device->port.iobase)
@@ -190,61 +204,48 @@ static int __init early_uart_setup(struct console *console, char *options)
         return 0;
 }
 
-static struct console early_uart_console __initdata = {
-        .name   = "uart",
-        .write  = early_uart_write,
-        .setup  = early_uart_setup,
-        .flags  = CON_PRINTBUFFER,
-        .index  = -1,
-};
-
-static int __init early_uart_console_init(void)
-{
-        if (!early_uart_registered) {
-                register_console(&early_uart_console);
-                early_uart_registered = 1;
-        }
-        return 0;
-}
-console_initcall(early_uart_console_init);
-
-int __init early_serial_console_init(char *cmdline)
+int __init setup_early_serial8250_console(char *cmdline)
 {
         char *options;
         int err;
 
-        options = strstr(cmdline, "console=uart,");
-        if (!options)
-                return -ENODEV;
+        options = strstr(cmdline, "uart8250,");
+        if (!options) {
+                options = strstr(cmdline, "uart,");
+                if (!options)
+                        return 0;
+        }
 
         options = strchr(cmdline, ',') + 1;
-        if ((err = early_uart_setup(NULL, options)) < 0)
+        if ((err = early_serial8250_setup(options)) < 0)
                 return err;
-        return early_uart_console_init();
+
+        register_console(&early_serial8250_console);
+
+        return 0;
 }
 
-static int __init early_uart_console_switch(void)
+int __init serial8250_find_port_for_earlycon(void)
 {
-        struct early_uart_device *device = &early_device;
+        struct early_serial8250_device *device = &early_device;
         struct uart_port *port = &device->port;
-        int mmio, line;
+        int line;
+        int ret;
 
-        if (!(early_uart_console.flags & CON_ENABLED))
-                return 0;
+        if (!device->port.membase && !device->port.iobase)
+                return -ENODEV;
 
-        /* Try to start the normal driver on a matching line.  */
-        mmio = (port->iotype == UPIO_MEM);
-        line = serial8250_start_console(port, device->options);
+        line = serial8250_find_port(port);
         if (line < 0)
-                printk("No ttyS device at %s 0x%lx for console\n",
-                        mmio ? "MMIO" : "I/O port",
-                        mmio ? port->mapbase :
-                            (unsigned long) port->iobase);
+                return -ENODEV;
 
-        unregister_console(&early_uart_console);
-        if (mmio)
-                iounmap(port->membase);
+        ret = update_console_cmdline("uart", 8250,
+                             "ttyS", line, device->options);
+        if (ret < 0)
+                ret = update_console_cmdline("uart", 0,
+                                     "ttyS", line, device->options);
 
-        return 0;
+        return ret;
 }
-late_initcall(early_uart_console_switch);
+
+early_param("earlycon", setup_early_serial8250_console);
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 2adbed4e10f3..cab42cbd920d 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -62,8 +62,22 @@ config SERIAL_8250_CONSOLE
           kernel will automatically use the first serial line, /dev/ttyS0, as
           system console.
 
+          you can set that using a kernel command line option such as
+          "console=uart8250,io,0x3f8,9600n8"
+          "console=uart8250,mmio,0xff5e0000,115200n8".
+          and it will switch to normal serial console when correponding port is
+          ready.
+          "earlycon=uart8250,io,0x3f8,9600n8"
+          "earlycon=uart8250,mmio,0xff5e0000,115200n8".
+          it will not only setup early console.
+
           If unsure, say N.
 
+config FIX_EARLYCON_MEM
+        bool
+        depends on X86
+        default y
+
 config SERIAL_8250_GSC
         tristate
         depends on SERIAL_8250 && GSC
diff --git a/include/asm-i386/fixmap.h b/include/asm-i386/fixmap.h
index 80ea052ee3a4..249e753ac805 100644
--- a/include/asm-i386/fixmap.h
+++ b/include/asm-i386/fixmap.h
@@ -54,6 +54,8 @@ extern unsigned long __FIXADDR_TOP;
 enum fixed_addresses {
         FIX_HOLE,
         FIX_VDSO,
+        FIX_DBGP_BASE,
+        FIX_EARLYCON_MEM_BASE,
 #ifdef CONFIG_X86_LOCAL_APIC
         FIX_APIC_BASE,  /* local (CPU) APIC) -- required for SMP or not */
 #endif
diff --git a/include/asm-i386/io.h b/include/asm-i386/io.h
index e797586a5bfc..7b65b5b00034 100644
--- a/include/asm-i386/io.h
+++ b/include/asm-i386/io.h
@@ -129,6 +129,7 @@ extern void iounmap(volatile void __iomem *addr);
  */
 extern void *bt_ioremap(unsigned long offset, unsigned long size);
 extern void bt_iounmap(void *addr, unsigned long size);
+extern void __iomem *fix_ioremap(unsigned idx, unsigned long phys);
 
 /* Use early IO mappings for DMI because it's initialized early */
 #define dmi_ioremap bt_ioremap
diff --git a/include/asm-x86_64/fixmap.h b/include/asm-x86_64/fixmap.h
index e90e1677531b..2acb9b7f6418 100644
--- a/include/asm-x86_64/fixmap.h
+++ b/include/asm-x86_64/fixmap.h
@@ -35,6 +35,8 @@ enum fixed_addresses {
         VSYSCALL_LAST_PAGE,
         VSYSCALL_FIRST_PAGE = VSYSCALL_LAST_PAGE + ((VSYSCALL_END-VSYSCALL_START) >> PAGE_SHIFT) - 1,
         VSYSCALL_HPET,
+        FIX_DBGP_BASE,
+        FIX_EARLYCON_MEM_BASE,
         FIX_HPET_BASE,
         FIX_APIC_BASE,  /* local (CPU) APIC) -- required for SMP or not */
         FIX_IO_APIC_BASE_0,
@@ -84,7 +86,7 @@ static __always_inline unsigned long fix_to_virt(const unsigned int idx)
         if (idx >= __end_of_fixed_addresses)
                 __this_fixmap_does_not_exist();
 
-        return __fix_to_virt(idx);
+        return __fix_to_virt(idx);
 }
 
 #endif
diff --git a/include/asm-x86_64/io.h b/include/asm-x86_64/io.h
index de2cd9a2303a..7475095c5061 100644
--- a/include/asm-x86_64/io.h
+++ b/include/asm-x86_64/io.h
@@ -144,6 +144,7 @@ extern void early_iounmap(void *addr, unsigned long size);
  */
 extern void __iomem * ioremap_nocache (unsigned long offset, unsigned long size);
 extern void iounmap(volatile void __iomem *addr);
+extern void __iomem *fix_ioremap(unsigned idx, unsigned long phys);
 
 /*
  * ISA I/O bus memory addresses are 1:1 with the physical address.
diff --git a/include/linux/console.h b/include/linux/console.h
index 62ef6e11d0d2..c44d3dfde7a5 100644
--- a/include/linux/console.h
+++ b/include/linux/console.h
@@ -99,6 +99,7 @@ struct console {
         struct tty_driver *(*device)(struct console *, int *);
         void    (*unblank)(void);
         int     (*setup)(struct console *, char *);
+        int     (*early_setup)(void);
         short   flags;
         short   index;
         int     cflag;
@@ -107,6 +108,7 @@ struct console {
 };
 
 extern int add_preferred_console(char *name, int idx, char *options);
+extern int update_console_cmdline(char *name, int idx, char *name_new, int idx_new, char *options);
 extern void register_console(struct console *);
 extern int unregister_console(struct console *);
 extern struct console *console_drivers;
diff --git a/include/linux/serial.h b/include/linux/serial.h
index 33fc8cb8ddfb..deb714314fb1 100644
--- a/include/linux/serial.h
+++ b/include/linux/serial.h
@@ -177,11 +177,5 @@ struct serial_icounter_struct {
 #ifdef __KERNEL__
 #include <linux/compiler.h>
 
-/* Allow architectures to override entries in serial8250_ports[] at run time: */
-struct uart_port;       /* forward declaration */
-extern int early_serial_setup(struct uart_port *port);
-extern int early_serial_console_init(char *options);
-extern int serial8250_start_console(struct uart_port *port, char *options);
-
 #endif /* __KERNEL__ */
 #endif /* _LINUX_SERIAL_H */
diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h
index 71310d80c09a..706ee9a4c80c 100644
--- a/include/linux/serial_8250.h
+++ b/include/linux/serial_8250.h
@@ -60,4 +60,8 @@ void serial8250_unregister_port(int line);
 void serial8250_suspend_port(int line);
 void serial8250_resume_port(int line);
 
+extern int serial8250_find_port(struct uart_port *p);
+extern int serial8250_find_port_for_earlycon(void);
+extern int setup_early_serial8250_console(char *cmdline);
+
 #endif
diff --git a/init/main.c b/init/main.c
index 0eb1c7463fe4..038c7cb52390 100644
--- a/init/main.c
+++ b/init/main.c
@@ -453,7 +453,10 @@ static int __init do_early_param(char *param, char *val)
         struct obs_kernel_param *p;
 
         for (p = __setup_start; p < __setup_end; p++) {
-                if (p->early && strcmp(param, p->str) == 0) {
+                if ((p->early && strcmp(param, p->str) == 0) ||
+                    (strcmp(param, "console") == 0 &&
+                     strcmp(p->str, "earlycon") == 0)
+                ) {
                         if (p->setup_func(val) != 0)
                                 printk(KERN_WARNING
                                        "Malformed early option '%s'\n", param);
diff --git a/kernel/printk.c b/kernel/printk.c
index 7ce9a8c13312..f46cc6dff46e 100644
--- a/kernel/printk.c
+++ b/kernel/printk.c
@@ -726,6 +726,25 @@ int __init add_preferred_console(char *name, int idx, char *options)
         return 0;
 }
 
+int __init update_console_cmdline(char *name, int idx, char *name_new, int idx_new, char *options)
+{
+        struct console_cmdline *c;
+        int i;
+
+        for (i = 0; i < MAX_CMDLINECONSOLES && console_cmdline[i].name[0]; i++)
+                if (strcmp(console_cmdline[i].name, name) == 0 &&
+                          console_cmdline[i].index == idx) {
+                                c = &console_cmdline[i];
+                                memcpy(c->name, name_new, sizeof(c->name));
+                                c->name[sizeof(c->name) - 1] = 0;
+                                c->options = options;
+                                c->index = idx_new;
+                                return i;
+                }
+        /* not found */
+        return -1;
+}
+
 #ifndef CONFIG_DISABLE_CONSOLE_SUSPEND
 /**
  * suspend_console - suspend the console subsystem
@@ -942,6 +961,9 @@ void register_console(struct console *console)
         if (preferred_console < 0 || bootconsole || !console_drivers)
                 preferred_console = selected_console;
 
+        if (console->early_setup)
+                console->early_setup();
+
         /*
          *      See if we want to use this console driver. If we
          *      didn't select a console we take the first one