14 files changed, 24 insertions, 24 deletions

diff --git a/Documentation/powerpc/dts-bindings/xilinx.txt b/Documentation/powerpc/dts-bindings/xilinx.txt
index ea68046bb9cb..299d0923537b 100644
--- a/Documentation/powerpc/dts-bindings/xilinx.txt
+++ b/Documentation/powerpc/dts-bindings/xilinx.txt
@@ -11,7 +11,7 @@
    control how the core is synthesized.  Historically, the EDK tool would
    extract the device parameters relevant to device drivers and copy them
    into an 'xparameters.h' in the form of #define symbols.  This tells the
-   device drivers how the IP cores are configured, but it requres the kernel
+   device drivers how the IP cores are configured, but it requires the kernel
    to be recompiled every time the FPGA bitstream is resynthesized.
 
    The new approach is to export the parameters into the device tree and
diff --git a/arch/mips/sibyte/bcm1480/irq.c b/arch/mips/sibyte/bcm1480/irq.c
index 06e25d949768..3fbb033e23d8 100644
--- a/arch/mips/sibyte/bcm1480/irq.c
+++ b/arch/mips/sibyte/bcm1480/irq.c
@@ -254,7 +254,7 @@ void __init init_bcm1480_irqs(void)
  * On the second cpu, everything is set to IP5, which is
  * ignored, EXCEPT the mailbox interrupt.  That one is
  * set to IP[2] so it is handled.  This is needed so we
- * can do cross-cpu function calls, as requred by SMP
+ * can do cross-cpu function calls, as required by SMP
  */
 
 #define IMR_IP2_VAL     K_BCM1480_INT_MAP_I0
diff --git a/arch/mips/sibyte/sb1250/irq.c b/arch/mips/sibyte/sb1250/irq.c
index ab44a2f59ee4..b452e3c82792 100644
--- a/arch/mips/sibyte/sb1250/irq.c
+++ b/arch/mips/sibyte/sb1250/irq.c
@@ -237,7 +237,7 @@ void __init init_sb1250_irqs(void)
  * On the second cpu, everything is set to IP5, which is
  * ignored, EXCEPT the mailbox interrupt.  That one is
  * set to IP[2] so it is handled.  This is needed so we
- * can do cross-cpu function calls, as requred by SMP
+ * can do cross-cpu function calls, as required by SMP
  */
 
 #define IMR_IP2_VAL     K_INT_MAP_I0
diff --git a/crypto/Kconfig b/crypto/Kconfig
index 403857ad06d4..9d9434f08c92 100644
--- a/crypto/Kconfig
+++ b/crypto/Kconfig
@@ -28,7 +28,7 @@ config CRYPTO_FIPS
           This options enables the fips boot option which is
           required if you want to system to operate in a FIPS 200
           certification.  You should say no unless you know what
-          this is. Note that CRYPTO_ANSI_CPRNG is requred if this
+          this is. Note that CRYPTO_ANSI_CPRNG is required if this
           option is selected
 
 config CRYPTO_ALGAPI
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 9cd6de5f9906..c297fc22867e 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -904,9 +904,9 @@ intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
 
         memset(best_clock, 0, sizeof(*best_clock));
         max_n = limit->n.max;
-        /* based on hardware requriment prefer smaller n to precision */
+        /* based on hardware requirement, prefer smaller n to precision */
         for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) {
-                /* based on hardware requirment prefere larger m1,m2 */
+                /* based on hardware requirement, prefere larger m1,m2 */
                 for (clock.m1 = limit->m1.max;
                      clock.m1 >= limit->m1.min; clock.m1--) {
                         for (clock.m2 = limit->m2.max;
diff --git a/drivers/gpu/drm/radeon/atombios.h b/drivers/gpu/drm/radeon/atombios.h
index 6732b5dd8ff4..e91a815861f4 100644
--- a/drivers/gpu/drm/radeon/atombios.h
+++ b/drivers/gpu/drm/radeon/atombios.h
@@ -3780,7 +3780,7 @@ typedef struct _ATOM_ASIC_SS_ASSIGNMENT
         UCHAR                                                           ucReserved[2];
 }ATOM_ASIC_SS_ASSIGNMENT;
 
-//Define ucClockIndication, SW uses the IDs below to search if the SS is requried/enabled on a clock branch/signal type.
+//Define ucClockIndication, SW uses the IDs below to search if the SS is required/enabled on a clock branch/signal type.
 //SS is not required or enabled if a match is not found.
 #define ASIC_INTERNAL_MEMORY_SS                 1
 #define ASIC_INTERNAL_ENGINE_SS                 2
@@ -5895,7 +5895,7 @@ typedef struct _ATOM_PPLIB_RS780_CLOCK_INFO
       UCHAR  ucPadding;                   // For proper alignment and size.
       USHORT usVDDC;                      // For the 780, use: None, Low, High, Variable
       UCHAR  ucMaxHTLinkWidth;            // From SBIOS - {2, 4, 8, 16}
-      UCHAR  ucMinHTLinkWidth;            // From SBIOS - {2, 4, 8, 16}. Effective only if CDLW enabled. Minimum down stream width could be bigger as display BW requriement.
+      UCHAR  ucMinHTLinkWidth;            // From SBIOS - {2, 4, 8, 16}. Effective only if CDLW enabled. Minimum down stream width could be bigger as display BW requirement.
       USHORT usHTLinkFreq;                // See definition ATOM_PPLIB_RS780_HTLINKFREQ_xxx or in MHz(>=200).
       ULONG  ulFlags; 
 } ATOM_PPLIB_RS780_CLOCK_INFO;
diff --git a/drivers/isdn/hardware/mISDN/hfcmulti.c b/drivers/isdn/hardware/mISDN/hfcmulti.c
index ad36df9b759c..fa82ce32aa4e 100644
--- a/drivers/isdn/hardware/mISDN/hfcmulti.c
+++ b/drivers/isdn/hardware/mISDN/hfcmulti.c
@@ -117,7 +117,7 @@
  *      NOTE: only one mode value must be given for every card.
  *      -> See hfc_multi.h for HFC_IO_MODE_* values
  *      By default, the IO mode is pci memory IO (MEMIO).
- *      Some cards requre specific IO mode, so it cannot be changed.
+ *      Some cards require specific IO mode, so it cannot be changed.
  *      It may be usefull to set IO mode to register io (REGIO) to solve
  *      PCI bridge problems.
  *      If unsure, don't give this parameter.
diff --git a/drivers/net/bnx2x_hsi.h b/drivers/net/bnx2x_hsi.h
index 760069345b11..fd1f29e0317d 100644
--- a/drivers/net/bnx2x_hsi.h
+++ b/drivers/net/bnx2x_hsi.h
@@ -683,7 +683,7 @@ struct drv_func_mb {
 #define DRV_MSG_CODE_GET_MANUF_KEY                      0x82000000
 #define DRV_MSG_CODE_LOAD_L2B_PRAM                      0x90000000
         /*
-         * The optic module verification commands requris bootcode
+         * The optic module verification commands require bootcode
          * v5.0.6 or later
          */
 #define DRV_MSG_CODE_VRFY_OPT_MDL                       0xa0000000
diff --git a/drivers/net/ps3_gelic_wireless.c b/drivers/net/ps3_gelic_wireless.c
index 2663b2fdc0bb..7fe54c261c44 100644
--- a/drivers/net/ps3_gelic_wireless.c
+++ b/drivers/net/ps3_gelic_wireless.c
@@ -95,7 +95,7 @@ static inline int precise_ie(void)
  * post_eurus_cmd helpers
  */
 struct eurus_cmd_arg_info {
-        int pre_arg; /* command requres arg1, arg2 at POST COMMAND */
+        int pre_arg; /* command requires arg1, arg2 at POST COMMAND */
         int post_arg; /* command requires arg1, arg2 at GET_RESULT */
 };
 
diff --git a/drivers/staging/vt6655/rxtx.c b/drivers/staging/vt6655/rxtx.c
index ed3070edcac1..4fcc4351e73f 100644
--- a/drivers/staging/vt6655/rxtx.c
+++ b/drivers/staging/vt6655/rxtx.c
@@ -25,19 +25,19 @@
  * Date: May 20, 2003
  *
  * Functions:
- *      s_vGenerateTxParameter - Generate tx dma requried parameter.
+ *      s_vGenerateTxParameter - Generate tx dma required parameter.
  *      vGenerateMACHeader - Translate 802.3 to 802.11 header
- *      cbGetFragCount - Caculate fragement number count
+ *      cbGetFragCount - Caculate fragment number count
  *      csBeacon_xmit - beacon tx function
  *      csMgmt_xmit - management tx function
  *      s_cbFillTxBufHead - fulfill tx dma buffer header
  *      s_uGetDataDuration - get tx data required duration
  *      s_uFillDataHead- fulfill tx data duration header
- *      s_uGetRTSCTSDuration- get rtx/cts requried duration
+ *      s_uGetRTSCTSDuration- get rtx/cts required duration
  *      s_uGetRTSCTSRsvTime- get rts/cts reserved time
  *      s_uGetTxRsvTime- get frame reserved time
  *      s_vFillCTSHead- fulfill CTS ctl header
- *      s_vFillFragParameter- Set fragement ctl parameter.
+ *      s_vFillFragParameter- Set fragment ctl parameter.
  *      s_vFillRTSHead- fulfill RTS ctl header
  *      s_vFillTxKey- fulfill tx encrypt key
  *      s_vSWencryption- Software encrypt header
@@ -877,7 +877,7 @@ s_vFillRTSHead (
     }
 
     // Note: So far RTSHead dosen't appear in ATIM & Beacom DMA, so we don't need to take them into account.
-    //       Otherwise, we need to modified codes for them.
+    //       Otherwise, we need to modify codes for them.
     if (byPktType == PK_TYPE_11GB || byPktType == PK_TYPE_11GA) {
         if (byFBOption == AUTO_FB_NONE) {
             PSRTS_g pBuf = (PSRTS_g)pvRTS;
@@ -1133,7 +1133,7 @@ s_vFillCTSHead (
  *
  * Parameters:
  *  In:
- *      pDevice         - Pointer to adpater
+ *      pDevice         - Pointer to adapter
  *      pTxDataHead     - Transmit Data Buffer
  *      pTxBufHead      - pTxBufHead
  *      pvRrvTime        - pvRrvTime
@@ -2252,7 +2252,7 @@ vGenerateFIFOHeader (
  *
  * Parameters:
  *  In:
- *      pDevice         - Pointer to adpater
+ *      pDevice         - Pointer to adapter
  *      dwTxBufferAddr  - Transmit Buffer
  *      pPacket         - Packet from upper layer
  *      cbPacketSize    - Transmit Data Length
diff --git a/drivers/staging/vt6656/rxtx.c b/drivers/staging/vt6656/rxtx.c
index d9fa36c95230..a2ce6fad8ee5 100644
--- a/drivers/staging/vt6656/rxtx.c
+++ b/drivers/staging/vt6656/rxtx.c
@@ -25,17 +25,17 @@
  * Date: May 20, 2003
  *
  * Functions:
- *      s_vGenerateTxParameter - Generate tx dma requried parameter.
+ *      s_vGenerateTxParameter - Generate tx dma required parameter.
  *      s_vGenerateMACHeader - Translate 802.3 to 802.11 header
  *      csBeacon_xmit - beacon tx function
  *      csMgmt_xmit - management tx function
  *      s_uGetDataDuration - get tx data required duration
  *      s_uFillDataHead- fulfill tx data duration header
- *      s_uGetRTSCTSDuration- get rtx/cts requried duration
+ *      s_uGetRTSCTSDuration- get rtx/cts required duration
  *      s_uGetRTSCTSRsvTime- get rts/cts reserved time
  *      s_uGetTxRsvTime- get frame reserved time
  *      s_vFillCTSHead- fulfill CTS ctl header
- *      s_vFillFragParameter- Set fragement ctl parameter.
+ *      s_vFillFragParameter- Set fragment ctl parameter.
  *      s_vFillRTSHead- fulfill RTS ctl header
  *      s_vFillTxKey- fulfill tx encrypt key
  *      s_vSWencryption- Software encrypt header
diff --git a/drivers/usb/wusbcore/wa-xfer.c b/drivers/usb/wusbcore/wa-xfer.c
index 489b47833e2c..3aad333ae9ce 100644
--- a/drivers/usb/wusbcore/wa-xfer.c
+++ b/drivers/usb/wusbcore/wa-xfer.c
@@ -76,7 +76,7 @@
  *     xfers-per-ripe, blocks-per-rpipe, rpipes-per-host), at the end
  *     we are going to have to rebuild all this based on an scheduler,
  *     to where we have a list of transactions to do and based on the
- *     availability of the different requried components (blocks,
+ *     availability of the different required components (blocks,
  *     rpipes, segment slots, etc), we go scheduling them. Painful.
  */
 #include <linux/init.h>
diff --git a/net/ipv4/ipmr.c b/net/ipv4/ipmr.c
index 8582e12e4a62..b1373abe2489 100644
--- a/net/ipv4/ipmr.c
+++ b/net/ipv4/ipmr.c
@@ -22,7 +22,7 @@
  *                                      overflow.
  *      Carlos Picoto           :       PIMv1 Support
  *      Pavlin Ivanov Radoslavov:       PIMv2 Registers must checksum only PIM header
- *                                      Relax this requrement to work with older peers.
+ *                                      Relax this requirement to work with older peers.
  *
  */
 
diff --git a/scripts/package/mkspec b/scripts/package/mkspec
index 47bdd2f99b78..fa27f3dac769 100755
--- a/scripts/package/mkspec
+++ b/scripts/package/mkspec
@@ -1,6 +1,6 @@
 #!/bin/sh
 #
-#       Output a simple RPM spec file that uses no fancy features requring
+#       Output a simple RPM spec file that uses no fancy features requiring
 #       RPM v4. This is intended to work with any RPM distro.
 #
 #       The only gothic bit here is redefining install_post to avoid