5 files changed, 574 insertions, 10 deletions

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 4fd4f913c36b..570be139f9df 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -108,6 +108,19 @@ config TWL4030_CORE
           high speed USB OTG transceiver, an audio codec (on most
           versions) and many other features.
 
+config TWL4030_POWER
+        bool "Support power resources on TWL4030 family chips"
+        depends on TWL4030_CORE && ARM
+        help
+          Say yes here if you want to use the power resources on the
+          TWL4030 family chips.  Most of these resources are regulators,
+          which have a separate driver; some are control signals, such
+          as clock request handshaking.
+
+          This driver uses board-specific data to initialize the resources
+          and load scripts controling which resources are switched off/on
+          or reset when a sleep, wakeup or warm reset event occurs.
+
 config MFD_TMIO
         bool
         default n
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 6a5d8cb545fc..f3b277b90d40 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -25,6 +25,7 @@ obj-$(CONFIG_TPS65010)		+= tps65010.o
 obj-$(CONFIG_MENELAUS)          += menelaus.o
 
 obj-$(CONFIG_TWL4030_CORE)      += twl4030-core.o twl4030-irq.o
+obj-$(CONFIG_TWL4030_POWER)    += twl4030-power.o
 
 obj-$(CONFIG_MFD_MC13783)       += mc13783-core.o
 
diff --git a/drivers/mfd/twl4030-core.c b/drivers/mfd/twl4030-core.c
index 1fd2620819d0..e424cf6d8e9e 100644
--- a/drivers/mfd/twl4030-core.c
+++ b/drivers/mfd/twl4030-core.c
@@ -89,6 +89,12 @@
 #define twl_has_madc()  false
 #endif
 
+#ifdef CONFIG_TWL4030_POWER
+#define twl_has_power()        true
+#else
+#define twl_has_power()        false
+#endif
+
 #if defined(CONFIG_RTC_DRV_TWL4030) || defined(CONFIG_RTC_DRV_TWL4030_MODULE)
 #define twl_has_rtc()   true
 #else
@@ -801,6 +807,10 @@ twl4030_probe(struct i2c_client *client, const struct i2c_device_id *id)
         /* setup clock framework */
         clocks_init(&client->dev);
 
+        /* load power event scripts */
+        if (twl_has_power() && pdata->power)
+                twl4030_power_init(pdata->power);
+
         /* Maybe init the T2 Interrupt subsystem */
         if (client->irq
                         && pdata->irq_base
diff --git a/drivers/mfd/twl4030-power.c b/drivers/mfd/twl4030-power.c
new file mode 100644
index 000000000000..e7688b041264
--- /dev/null
+++ b/drivers/mfd/twl4030-power.c
@@ -0,0 +1,466 @@
+/*
+ * linux/drivers/i2c/chips/twl4030-power.c
+ *
+ * Handle TWL4030 Power initialization
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ * Copyright (C) 2006 Texas Instruments, Inc
+ *
+ * Written by   Kalle Jokiniemi
+ *              Peter De Schrijver <peter.de-schrijver@nokia.com>
+ * Several fixes by Amit Kucheria <amit.kucheria@verdurent.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of this
+ * archive for more details.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/module.h>
+#include <linux/pm.h>
+#include <linux/i2c/twl4030.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+
+static u8 twl4030_start_script_address = 0x2b;
+
+#define PWR_P1_SW_EVENTS        0x10
+#define PWR_DEVOFF      (1<<0)
+
+#define PHY_TO_OFF_PM_MASTER(p)         (p - 0x36)
+#define PHY_TO_OFF_PM_RECEIVER(p)       (p - 0x5b)
+
+/* resource - hfclk */
+#define R_HFCLKOUT_DEV_GRP      PHY_TO_OFF_PM_RECEIVER(0xe6)
+
+/* PM events */
+#define R_P1_SW_EVENTS          PHY_TO_OFF_PM_MASTER(0x46)
+#define R_P2_SW_EVENTS          PHY_TO_OFF_PM_MASTER(0x47)
+#define R_P3_SW_EVENTS          PHY_TO_OFF_PM_MASTER(0x48)
+#define R_CFG_P1_TRANSITION     PHY_TO_OFF_PM_MASTER(0x36)
+#define R_CFG_P2_TRANSITION     PHY_TO_OFF_PM_MASTER(0x37)
+#define R_CFG_P3_TRANSITION     PHY_TO_OFF_PM_MASTER(0x38)
+
+#define LVL_WAKEUP      0x08
+
+#define ENABLE_WARMRESET (1<<4)
+
+#define END_OF_SCRIPT           0x3f
+
+#define R_SEQ_ADD_A2S           PHY_TO_OFF_PM_MASTER(0x55)
+#define R_SEQ_ADD_S2A12         PHY_TO_OFF_PM_MASTER(0x56)
+#define R_SEQ_ADD_S2A3          PHY_TO_OFF_PM_MASTER(0x57)
+#define R_SEQ_ADD_WARM          PHY_TO_OFF_PM_MASTER(0x58)
+#define R_MEMORY_ADDRESS        PHY_TO_OFF_PM_MASTER(0x59)
+#define R_MEMORY_DATA           PHY_TO_OFF_PM_MASTER(0x5a)
+
+#define R_PROTECT_KEY           0x0E
+#define KEY_1                   0xC0
+#define KEY_2                   0x0C
+
+/* resource configuration registers */
+
+#define DEVGROUP_OFFSET         0
+#define TYPE_OFFSET             1
+
+/* Bit positions */
+#define DEVGROUP_SHIFT          5
+#define DEVGROUP_MASK           (7 << DEVGROUP_SHIFT)
+#define TYPE_SHIFT              0
+#define TYPE_MASK               (7 << TYPE_SHIFT)
+#define TYPE2_SHIFT             3
+#define TYPE2_MASK              (3 << TYPE2_SHIFT)
+
+static u8 res_config_addrs[] = {
+        [RES_VAUX1]     = 0x17,
+        [RES_VAUX2]     = 0x1b,
+        [RES_VAUX3]     = 0x1f,
+        [RES_VAUX4]     = 0x23,
+        [RES_VMMC1]     = 0x27,
+        [RES_VMMC2]     = 0x2b,
+        [RES_VPLL1]     = 0x2f,
+        [RES_VPLL2]     = 0x33,
+        [RES_VSIM]      = 0x37,
+        [RES_VDAC]      = 0x3b,
+        [RES_VINTANA1]  = 0x3f,
+        [RES_VINTANA2]  = 0x43,
+        [RES_VINTDIG]   = 0x47,
+        [RES_VIO]       = 0x4b,
+        [RES_VDD1]      = 0x55,
+        [RES_VDD2]      = 0x63,
+        [RES_VUSB_1V5]  = 0x71,
+        [RES_VUSB_1V8]  = 0x74,
+        [RES_VUSB_3V1]  = 0x77,
+        [RES_VUSBCP]    = 0x7a,
+        [RES_REGEN]     = 0x7f,
+        [RES_NRES_PWRON] = 0x82,
+        [RES_CLKEN]     = 0x85,
+        [RES_SYSEN]     = 0x88,
+        [RES_HFCLKOUT]  = 0x8b,
+        [RES_32KCLKOUT] = 0x8e,
+        [RES_RESET]     = 0x91,
+        [RES_Main_Ref]  = 0x94,
+};
+
+static int __init twl4030_write_script_byte(u8 address, u8 byte)
+{
+        int err;
+
+        err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address,
+                                R_MEMORY_ADDRESS);
+        if (err)
+                goto out;
+        err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, byte,
+                                R_MEMORY_DATA);
+out:
+        return err;
+}
+
+static int __init twl4030_write_script_ins(u8 address, u16 pmb_message,
+                                           u8 delay, u8 next)
+{
+        int err;
+
+        address *= 4;
+        err = twl4030_write_script_byte(address++, pmb_message >> 8);
+        if (err)
+                goto out;
+        err = twl4030_write_script_byte(address++, pmb_message & 0xff);
+        if (err)
+                goto out;
+        err = twl4030_write_script_byte(address++, delay);
+        if (err)
+                goto out;
+        err = twl4030_write_script_byte(address++, next);
+out:
+        return err;
+}
+
+static int __init twl4030_write_script(u8 address, struct twl4030_ins *script,
+                                       int len)
+{
+        int err;
+
+        for (; len; len--, address++, script++) {
+                if (len == 1) {
+                        err = twl4030_write_script_ins(address,
+                                                script->pmb_message,
+                                                script->delay,
+                                                END_OF_SCRIPT);
+                        if (err)
+                                break;
+                } else {
+                        err = twl4030_write_script_ins(address,
+                                                script->pmb_message,
+                                                script->delay,
+                                                address + 1);
+                        if (err)
+                                break;
+                }
+        }
+        return err;
+}
+
+static int __init twl4030_config_wakeup3_sequence(u8 address)
+{
+        int err;
+        u8 data;
+
+        /* Set SLEEP to ACTIVE SEQ address for P3 */
+        err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address,
+                                R_SEQ_ADD_S2A3);
+        if (err)
+                goto out;
+
+        /* P3 LVL_WAKEUP should be on LEVEL */
+        err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &data,
+                                R_P3_SW_EVENTS);
+        if (err)
+                goto out;
+        data |= LVL_WAKEUP;
+        err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, data,
+                                R_P3_SW_EVENTS);
+out:
+        if (err)
+                pr_err("TWL4030 wakeup sequence for P3 config error\n");
+        return err;
+}
+
+static int __init twl4030_config_wakeup12_sequence(u8 address)
+{
+        int err = 0;
+        u8 data;
+
+        /* Set SLEEP to ACTIVE SEQ address for P1 and P2 */
+        err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address,
+                                R_SEQ_ADD_S2A12);
+        if (err)
+                goto out;
+
+        /* P1/P2 LVL_WAKEUP should be on LEVEL */
+        err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &data,
+                                R_P1_SW_EVENTS);
+        if (err)
+                goto out;
+
+        data |= LVL_WAKEUP;
+        err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, data,
+                                R_P1_SW_EVENTS);
+        if (err)
+                goto out;
+
+        err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &data,
+                                R_P2_SW_EVENTS);
+        if (err)
+                goto out;
+
+        data |= LVL_WAKEUP;
+        err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, data,
+                                R_P2_SW_EVENTS);
+        if (err)
+                goto out;
+
+        if (machine_is_omap_3430sdp() || machine_is_omap_ldp()) {
+                /* Disabling AC charger effect on sleep-active transitions */
+                err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &data,
+                                        R_CFG_P1_TRANSITION);
+                if (err)
+                        goto out;
+                data &= ~(1<<1);
+                err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, data ,
+                                        R_CFG_P1_TRANSITION);
+                if (err)
+                        goto out;
+        }
+
+out:
+        if (err)
+                pr_err("TWL4030 wakeup sequence for P1 and P2" \
+                        "config error\n");
+        return err;
+}
+
+static int __init twl4030_config_sleep_sequence(u8 address)
+{
+        int err;
+
+        /* Set ACTIVE to SLEEP SEQ address in T2 memory*/
+        err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address,
+                                R_SEQ_ADD_A2S);
+
+        if (err)
+                pr_err("TWL4030 sleep sequence config error\n");
+
+        return err;
+}
+
+static int __init twl4030_config_warmreset_sequence(u8 address)
+{
+        int err;
+        u8 rd_data;
+
+        /* Set WARM RESET SEQ address for P1 */
+        err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address,
+                                R_SEQ_ADD_WARM);
+        if (err)
+                goto out;
+
+        /* P1/P2/P3 enable WARMRESET */
+        err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &rd_data,
+                                R_P1_SW_EVENTS);
+        if (err)
+                goto out;
+
+        rd_data |= ENABLE_WARMRESET;
+        err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, rd_data,
+                                R_P1_SW_EVENTS);
+        if (err)
+                goto out;
+
+        err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &rd_data,
+                                R_P2_SW_EVENTS);
+        if (err)
+                goto out;
+
+        rd_data |= ENABLE_WARMRESET;
+        err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, rd_data,
+                                R_P2_SW_EVENTS);
+        if (err)
+                goto out;
+
+        err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &rd_data,
+                                R_P3_SW_EVENTS);
+        if (err)
+                goto out;
+
+        rd_data |= ENABLE_WARMRESET;
+        err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, rd_data,
+                                R_P3_SW_EVENTS);
+out:
+        if (err)
+                pr_err("TWL4030 warmreset seq config error\n");
+        return err;
+}
+
+static int __init twl4030_configure_resource(struct twl4030_resconfig *rconfig)
+{
+        int rconfig_addr;
+        int err;
+        u8 type;
+        u8 grp;
+
+        if (rconfig->resource > TOTAL_RESOURCES) {
+                pr_err("TWL4030 Resource %d does not exist\n",
+                        rconfig->resource);
+                return -EINVAL;
+        }
+
+        rconfig_addr = res_config_addrs[rconfig->resource];
+
+        /* Set resource group */
+        err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, &grp,
+                                rconfig_addr + DEVGROUP_OFFSET);
+        if (err) {
+                pr_err("TWL4030 Resource %d group could not be read\n",
+                        rconfig->resource);
+                return err;
+        }
+
+        if (rconfig->devgroup >= 0) {
+                grp &= ~DEVGROUP_MASK;
+                grp |= rconfig->devgroup << DEVGROUP_SHIFT;
+                err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
+                                        grp, rconfig_addr + DEVGROUP_OFFSET);
+                if (err < 0) {
+                        pr_err("TWL4030 failed to program devgroup\n");
+                        return err;
+                }
+        }
+
+        /* Set resource types */
+        err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, &type,
+                                rconfig_addr + TYPE_OFFSET);
+        if (err < 0) {
+                pr_err("TWL4030 Resource %d type could not be read\n",
+                        rconfig->resource);
+                return err;
+        }
+
+        if (rconfig->type >= 0) {
+                type &= ~TYPE_MASK;
+                type |= rconfig->type << TYPE_SHIFT;
+        }
+
+        if (rconfig->type2 >= 0) {
+                type &= ~TYPE2_MASK;
+                type |= rconfig->type2 << TYPE2_SHIFT;
+        }
+
+        err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
+                                type, rconfig_addr + TYPE_OFFSET);
+        if (err < 0) {
+                pr_err("TWL4030 failed to program resource type\n");
+                return err;
+        }
+
+        return 0;
+}
+
+static int __init load_twl4030_script(struct twl4030_script *tscript,
+               u8 address)
+{
+        int err;
+
+        /* Make sure the script isn't going beyond last valid address (0x3f) */
+        if ((address + tscript->size) > END_OF_SCRIPT) {
+                pr_err("TWL4030 scripts too big error\n");
+                return -EINVAL;
+        }
+
+        err = twl4030_write_script(address, tscript->script, tscript->size);
+        if (err)
+                goto out;
+
+        if (tscript->flags & TWL4030_WRST_SCRIPT) {
+                err = twl4030_config_warmreset_sequence(address);
+                if (err)
+                        goto out;
+        }
+        if (tscript->flags & TWL4030_WAKEUP12_SCRIPT) {
+                err = twl4030_config_wakeup12_sequence(address);
+                if (err)
+                        goto out;
+        }
+        if (tscript->flags & TWL4030_WAKEUP3_SCRIPT) {
+                err = twl4030_config_wakeup3_sequence(address);
+                if (err)
+                        goto out;
+        }
+        if (tscript->flags & TWL4030_SLEEP_SCRIPT)
+                err = twl4030_config_sleep_sequence(address);
+out:
+        return err;
+}
+
+void __init twl4030_power_init(struct twl4030_power_data *twl4030_scripts)
+{
+        int err = 0;
+        int i;
+        struct twl4030_resconfig *resconfig;
+        u8 address = twl4030_start_script_address;
+
+        err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, KEY_1,
+                                R_PROTECT_KEY);
+        if (err)
+                goto unlock;
+
+        err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, KEY_2,
+                                R_PROTECT_KEY);
+        if (err)
+                goto unlock;
+
+        for (i = 0; i < twl4030_scripts->num; i++) {
+                err = load_twl4030_script(twl4030_scripts->scripts[i], address);
+                if (err)
+                        goto load;
+                address += twl4030_scripts->scripts[i]->size;
+        }
+
+        resconfig = twl4030_scripts->resource_config;
+        if (resconfig) {
+                while (resconfig->resource) {
+                        err = twl4030_configure_resource(resconfig);
+                        if (err)
+                                goto resource;
+                        resconfig++;
+
+                }
+        }
+
+        err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0, R_PROTECT_KEY);
+        if (err)
+                pr_err("TWL4030 Unable to relock registers\n");
+        return;
+
+unlock:
+        if (err)
+                pr_err("TWL4030 Unable to unlock registers\n");
+        return;
+load:
+        if (err)
+                pr_err("TWL4030 failed to load scripts\n");
+        return;
+resource:
+        if (err)
+                pr_err("TWL4030 failed to configure resource\n");
+        return;
+}
diff --git a/include/linux/i2c/twl4030.h b/include/linux/i2c/twl4030.h
index 3fd21d7cb6bf..2d02dfd7076c 100644
--- a/include/linux/i2c/twl4030.h
+++ b/include/linux/i2c/twl4030.h
@@ -223,19 +223,28 @@ int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes);
 
 /* Power bus message definitions */
 
-#define DEV_GRP_NULL            0x0
-#define DEV_GRP_P1              0x1
-#define DEV_GRP_P2              0x2
-#define DEV_GRP_P3              0x4
+/* The TWL4030/5030 splits its power-management resources (the various
+ * regulators, clock and reset lines) into 3 processor groups - P1, P2 and
+ * P3. These groups can then be configured to transition between sleep, wait-on
+ * and active states by sending messages to the power bus.  See Section 5.4.2
+ * Power Resources of TWL4030 TRM
+ */
 
-#define RES_GRP_RES             0x0
-#define RES_GRP_PP              0x1
-#define RES_GRP_RC              0x2
+/* Processor groups */
+#define DEV_GRP_NULL            0x0
+#define DEV_GRP_P1              0x1     /* P1: all OMAP devices */
+#define DEV_GRP_P2              0x2     /* P2: all Modem devices */
+#define DEV_GRP_P3              0x4     /* P3: all peripheral devices */
+
+/* Resource groups */
+#define RES_GRP_RES             0x0     /* Reserved */
+#define RES_GRP_PP              0x1     /* Power providers */
+#define RES_GRP_RC              0x2     /* Reset and control */
 #define RES_GRP_PP_RC           0x3
-#define RES_GRP_PR              0x4
+#define RES_GRP_PR              0x4     /* Power references */
 #define RES_GRP_PP_PR           0x5
 #define RES_GRP_RC_PR           0x6
-#define RES_GRP_ALL             0x7
+#define RES_GRP_ALL             0x7     /* All resource groups */
 
 #define RES_TYPE2_R0            0x0
 
@@ -246,6 +255,41 @@ int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes);
 #define RES_STATE_SLEEP         0x8
 #define RES_STATE_OFF           0x0
 
+/* Power resources */
+
+/* Power providers */
+#define RES_VAUX1               1
+#define RES_VAUX2               2
+#define RES_VAUX3               3
+#define RES_VAUX4               4
+#define RES_VMMC1               5
+#define RES_VMMC2               6
+#define RES_VPLL1               7
+#define RES_VPLL2               8
+#define RES_VSIM                9
+#define RES_VDAC                10
+#define RES_VINTANA1            11
+#define RES_VINTANA2            12
+#define RES_VINTDIG             13
+#define RES_VIO                 14
+#define RES_VDD1                15
+#define RES_VDD2                16
+#define RES_VUSB_1V5            17
+#define RES_VUSB_1V8            18
+#define RES_VUSB_3V1            19
+#define RES_VUSBCP              20
+#define RES_REGEN               21
+/* Reset and control */
+#define RES_NRES_PWRON          22
+#define RES_CLKEN               23
+#define RES_SYSEN               24
+#define RES_HFCLKOUT            25
+#define RES_32KCLKOUT           26
+#define RES_RESET               27
+/* Power Reference */
+#define RES_Main_Ref            28
+
+#define TOTAL_RESOURCES         28
 /*
  * Power Bus Message Format ... these can be sent individually by Linux,
  * but are usually part of downloaded scripts that are run when various
@@ -327,6 +371,36 @@ struct twl4030_usb_data {
         enum twl4030_usb_mode   usb_mode;
 };
 
+struct twl4030_ins {
+        u16 pmb_message;
+        u8 delay;
+};
+
+struct twl4030_script {
+        struct twl4030_ins *script;
+        unsigned size;
+        u8 flags;
+#define TWL4030_WRST_SCRIPT     (1<<0)
+#define TWL4030_WAKEUP12_SCRIPT (1<<1)
+#define TWL4030_WAKEUP3_SCRIPT  (1<<2)
+#define TWL4030_SLEEP_SCRIPT    (1<<3)
+};
+
+struct twl4030_resconfig {
+        u8 resource;
+        u8 devgroup;    /* Processor group that Power resource belongs to */
+        u8 type;        /* Power resource addressed, 6 / broadcast message */
+        u8 type2;       /* Power resource addressed, 3 / broadcast message */
+};
+
+struct twl4030_power_data {
+        struct twl4030_script **scripts;
+        unsigned num;
+        struct twl4030_resconfig *resource_config;
+};
+
+extern void twl4030_power_init(struct twl4030_power_data *triton2_scripts);
+
 struct twl4030_platform_data {
         unsigned                                irq_base, irq_end;
         struct twl4030_bci_platform_data        *bci;
@@ -334,6 +408,7 @@ struct twl4030_platform_data {
         struct twl4030_madc_platform_data       *madc;
         struct twl4030_keypad_data              *keypad;
         struct twl4030_usb_data                 *usb;
+        struct twl4030_power_data               *power;
 
         /* LDO regulators */
         struct regulator_init_data              *vdac;
@@ -364,7 +439,6 @@ int twl4030_sih_setup(int module);
 #define TWL4030_VAUX3_DEV_GRP           0x1F
 #define TWL4030_VAUX3_DEDICATED         0x22
 
-
 #if defined(CONFIG_TWL4030_BCI_BATTERY) || \
         defined(CONFIG_TWL4030_BCI_BATTERY_MODULE)
         extern int twl4030charger_usb_en(int enable);