5 files changed, 443 insertions, 0 deletions

diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index c1d77f5b3823..0104fd142e70 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -10,6 +10,11 @@ config ARCH_LUBBOCK
         select PXA25x
         select SA1111
 
+config MACH_LOGICPD_PXA270
+        bool "LogicPD PXA270 Card Engine Development Platform"
+        select PXA27x
+        select IWMMXT
+
 config MACH_MAINSTONE
         bool "Intel HCDDBBVA0 Development Platform"
         select PXA27x
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 382644401a4d..4e8a983e2b83 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_PXA27x) += pxa27x.o
 
 # Specific board support
 obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o
+obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o
 obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o
 obj-$(CONFIG_ARCH_PXA_IDP) += idp.o
 obj-$(CONFIG_PXA_SHARP_C7xx)    += corgi.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o corgi_pm.o
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
new file mode 100644
index 000000000000..ec0f43a102c7
--- /dev/null
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -0,0 +1,393 @@
+/*
+ * linux/arch/arm/mach-pxa/lpd270.c
+ *
+ * Support for the LogicPD PXA270 Card Engine.
+ * Derived from the mainstone code, which carries these notices:
+ *
+ * Author:      Nicolas Pitre
+ * Created:     Nov 05, 2002
+ * Copyright:   MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/bitops.h>
+#include <linux/fb.h>
+#include <linux/ioport.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/mach-types.h>
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/sizes.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/flash.h>
+
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/lpd270.h>
+#include <asm/arch/audio.h>
+#include <asm/arch/pxafb.h>
+#include <asm/arch/mmc.h>
+#include <asm/arch/irda.h>
+#include <asm/arch/ohci.h>
+
+#include "generic.h"
+
+
+static unsigned int lpd270_irq_enabled;
+
+static void lpd270_mask_irq(unsigned int irq)
+{
+        int lpd270_irq = irq - LPD270_IRQ(0);
+
+        __raw_writew(~(1 << lpd270_irq), LPD270_INT_STATUS);
+
+        lpd270_irq_enabled &= ~(1 << lpd270_irq);
+        __raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
+}
+
+static void lpd270_unmask_irq(unsigned int irq)
+{
+        int lpd270_irq = irq - LPD270_IRQ(0);
+
+        lpd270_irq_enabled |= 1 << lpd270_irq;
+        __raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
+}
+
+static struct irqchip lpd270_irq_chip = {
+        .ack            = lpd270_mask_irq,
+        .mask           = lpd270_mask_irq,
+        .unmask         = lpd270_unmask_irq,
+};
+
+static void lpd270_irq_handler(unsigned int irq, struct irqdesc *desc,
+                                  struct pt_regs *regs)
+{
+        unsigned long pending;
+
+        pending = __raw_readw(LPD270_INT_STATUS) & lpd270_irq_enabled;
+        do {
+                GEDR(0) = GPIO_bit(0);  /* clear useless edge notification */
+                if (likely(pending)) {
+                        irq = LPD270_IRQ(0) + __ffs(pending);
+                        desc = irq_desc + irq;
+                        desc_handle_irq(irq, desc, regs);
+
+                        pending = __raw_readw(LPD270_INT_STATUS) &
+                                                lpd270_irq_enabled;
+                }
+        } while (pending);
+}
+
+static void __init lpd270_init_irq(void)
+{
+        int irq;
+
+        pxa_init_irq();
+
+        __raw_writew(0, LPD270_INT_MASK);
+        __raw_writew(0, LPD270_INT_STATUS);
+
+        /* setup extra LogicPD PXA270 irqs */
+        for (irq = LPD270_IRQ(2); irq <= LPD270_IRQ(4); irq++) {
+                set_irq_chip(irq, &lpd270_irq_chip);
+                set_irq_handler(irq, do_level_IRQ);
+                set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+        }
+        set_irq_chained_handler(IRQ_GPIO(0), lpd270_irq_handler);
+        set_irq_type(IRQ_GPIO(0), IRQT_FALLING);
+}
+
+
+#ifdef CONFIG_PM
+static int lpd270_irq_resume(struct sys_device *dev)
+{
+        __raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
+        return 0;
+}
+
+static struct sysdev_class lpd270_irq_sysclass = {
+        set_kset_name("cpld_irq"),
+        .resume = lpd270_irq_resume,
+};
+
+static struct sys_device lpd270_irq_device = {
+        .cls = &lpd270_irq_sysclass,
+};
+
+static int __init lpd270_irq_device_init(void)
+{
+        int ret = sysdev_class_register(&lpd270_irq_sysclass);
+        if (ret == 0)
+                ret = sysdev_register(&lpd270_irq_device);
+        return ret;
+}
+
+device_initcall(lpd270_irq_device_init);
+#endif
+
+
+static struct resource smc91x_resources[] = {
+        [0] = {
+                .start  = LPD270_ETH_PHYS,
+                .end    = (LPD270_ETH_PHYS + 0xfffff),
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = LPD270_ETHERNET_IRQ,
+                .end    = LPD270_ETHERNET_IRQ,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device smc91x_device = {
+        .name           = "smc91x",
+        .id             = 0,
+        .num_resources  = ARRAY_SIZE(smc91x_resources),
+        .resource       = smc91x_resources,
+};
+
+static struct platform_device lpd270_audio_device = {
+        .name           = "pxa2xx-ac97",
+        .id             = -1,
+};
+
+static struct resource lpd270_flash_resources[] = {
+        [0] = {
+                .start  = PXA_CS0_PHYS,
+                .end    = PXA_CS0_PHYS + SZ_64M - 1,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = PXA_CS1_PHYS,
+                .end    = PXA_CS1_PHYS + SZ_64M - 1,
+                .flags  = IORESOURCE_MEM,
+        },
+};
+
+static struct mtd_partition lpd270_flash0_partitions[] = {
+        {
+                .name =         "Bootloader",
+                .size =         0x00040000,
+                .offset =       0,
+                .mask_flags =   MTD_WRITEABLE  /* force read-only */
+        }, {
+                .name =         "Kernel",
+                .size =         0x00400000,
+                .offset =       0x00040000,
+        }, {
+                .name =         "Filesystem",
+                .size =         MTDPART_SIZ_FULL,
+                .offset =       0x00440000
+        },
+};
+
+static struct flash_platform_data lpd270_flash_data[2] = {
+        {
+                .name           = "processor-flash",
+                .map_name       = "cfi_probe",
+                .parts          = lpd270_flash0_partitions,
+                .nr_parts       = ARRAY_SIZE(lpd270_flash0_partitions),
+        }, {
+                .name           = "mainboard-flash",
+                .map_name       = "cfi_probe",
+                .parts          = NULL,
+                .nr_parts       = 0,
+        }
+};
+
+static struct platform_device lpd270_flash_device[2] = {
+        {
+                .name           = "pxa2xx-flash",
+                .id             = 0,
+                .dev = {
+                        .platform_data  = &lpd270_flash_data[0],
+                },
+                .resource       = &lpd270_flash_resources[0],
+                .num_resources  = 1,
+        }, {
+                .name           = "pxa2xx-flash",
+                .id             = 1,
+                .dev = {
+                        .platform_data  = &lpd270_flash_data[1],
+                },
+                .resource       = &lpd270_flash_resources[1],
+                .num_resources  = 1,
+        },
+};
+
+static void lpd270_backlight_power(int on)
+{
+        if (on) {
+                pxa_gpio_mode(GPIO16_PWM0_MD);
+                pxa_set_cken(CKEN0_PWM0, 1);
+                PWM_CTRL0 = 0;
+                PWM_PWDUTY0 = 0x3ff;
+                PWM_PERVAL0 = 0x3ff;
+        } else {
+                PWM_CTRL0 = 0;
+                PWM_PWDUTY0 = 0x0;
+                PWM_PERVAL0 = 0x3FF;
+                pxa_set_cken(CKEN0_PWM0, 0);
+        }
+}
+
+/* 5.7" TFT QVGA (LoLo display number 1) */
+static struct pxafb_mach_info sharp_lq057q3dc02 __initdata = {
+        .pixclock               = 100000,
+        .xres                   = 240,
+        .yres                   = 320,
+        .bpp                    = 16,
+        .hsync_len              = 64,
+        .left_margin            = 0x27,
+        .right_margin           = 0x09,
+        .vsync_len              = 0x04,
+        .upper_margin           = 0x08,
+        .lower_margin           = 0x14,
+        .sync                   = 0,
+        .lccr0                  = 0x07800080,
+        .lccr3                  = 0x04400007,
+        .pxafb_backlight_power  = lpd270_backlight_power,
+};
+
+/* 6.4" TFT VGA (LoLo display number 5) */
+static struct pxafb_mach_info sharp_lq64d343 __initdata = {
+        .pixclock               = 20000,
+        .xres                   = 640,
+        .yres                   = 480,
+        .bpp                    = 16,
+        .hsync_len              = 49,
+        .left_margin            = 0x89,
+        .right_margin           = 0x19,
+        .vsync_len              = 18,
+        .upper_margin           = 0x22,
+        .lower_margin           = 0,
+        .sync                   = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+        .lccr0                  = 0x07800080,
+        .lccr3                  = 0x04400001,
+        .pxafb_backlight_power  = lpd270_backlight_power,
+};
+
+/* 3.5" TFT QVGA (LoLo display number 8) */
+static struct pxafb_mach_info sharp_lq035q7db02_20 __initdata = {
+        .pixclock               = 100000,
+        .xres                   = 240,
+        .yres                   = 320,
+        .bpp                    = 16,
+        .hsync_len              = 0x34,
+        .left_margin            = 0x09,
+        .right_margin           = 0x09,
+        .vsync_len              = 0x08,
+        .upper_margin           = 0x05,
+        .lower_margin           = 0x14,
+        .sync                   = 0,
+        .lccr0                  = 0x07800080,
+        .lccr3                  = 0x04400007,
+        .pxafb_backlight_power  = lpd270_backlight_power,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+        &smc91x_device,
+        &lpd270_audio_device,
+        &lpd270_flash_device[0],
+        &lpd270_flash_device[1],
+};
+
+static int lpd270_ohci_init(struct device *dev)
+{
+        /* setup Port1 GPIO pin. */
+        pxa_gpio_mode(88 | GPIO_ALT_FN_1_IN);   /* USBHPWR1 */
+        pxa_gpio_mode(89 | GPIO_ALT_FN_2_OUT);  /* USBHPEN1 */
+
+        /* Set the Power Control Polarity Low and Power Sense
+           Polarity Low to active low. */
+        UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) &
+                ~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE);
+
+        return 0;
+}
+
+static struct pxaohci_platform_data lpd270_ohci_platform_data = {
+        .port_mode      = PMM_PERPORT_MODE,
+        .init           = lpd270_ohci_init,
+};
+
+static void __init lpd270_init(void)
+{
+        lpd270_flash_data[0].width = (BOOT_DEF & 1) ? 2 : 4;
+        lpd270_flash_data[1].width = 4;
+
+        /*
+         * System bus arbiter setting:
+         * - Core_Park
+         * - LCD_wt:DMA_wt:CORE_Wt = 2:3:4
+         */
+        ARB_CNTRL = ARB_CORE_PARK | 0x234;
+
+        /*
+         * On LogicPD PXA270, we route AC97_SYSCLK via GPIO45.
+         */
+        pxa_gpio_mode(GPIO45_SYSCLK_AC97_MD);
+
+        platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+
+        // set_pxa_fb_info(&sharp_lq057q3dc02);
+        set_pxa_fb_info(&sharp_lq64d343);
+        // set_pxa_fb_info(&sharp_lq035q7db02_20);
+
+        pxa_set_ohci_info(&lpd270_ohci_platform_data);
+}
+
+
+static struct map_desc lpd270_io_desc[] __initdata = {
+        {
+                .virtual        = LPD270_CPLD_VIRT,
+                .pfn            = __phys_to_pfn(LPD270_CPLD_PHYS),
+                .length         = LPD270_CPLD_SIZE,
+                .type           = MT_DEVICE,
+        },
+};
+
+static void __init lpd270_map_io(void)
+{
+        pxa_map_io();
+        iotable_init(lpd270_io_desc, ARRAY_SIZE(lpd270_io_desc));
+
+        /* initialize sleep mode regs (wake-up sources, etc) */
+        PGSR0 = 0x00008800;
+        PGSR1 = 0x00000002;
+        PGSR2 = 0x0001FC00;
+        PGSR3 = 0x00001F81;
+        PWER  = 0xC0000002;
+        PRER  = 0x00000002;
+        PFER  = 0x00000002;
+
+        /* for use I SRAM as framebuffer.  */
+        PSLR |= 0x00000F04;
+        PCFR  = 0x00000066;
+}
+
+MACHINE_START(LOGICPD_PXA270, "LogicPD PXA270 Card Engine")
+        /* Maintainer: Peter Barada */
+        .phys_io        = 0x40000000,
+        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+        .boot_params    = 0xa0000100,
+        .map_io         = lpd270_map_io,
+        .init_irq       = lpd270_init_irq,
+        .timer          = &pxa_timer,
+        .init_machine   = lpd270_init,
+MACHINE_END
diff --git a/include/asm-arm/arch-pxa/irqs.h b/include/asm-arm/arch-pxa/irqs.h
index 05c4b7027592..67af238a8f8e 100644
--- a/include/asm-arm/arch-pxa/irqs.h
+++ b/include/asm-arm/arch-pxa/irqs.h
@@ -176,6 +176,7 @@
 #elif defined(CONFIG_SHARP_LOCOMO)
 #define NR_IRQS                 (IRQ_LOCOMO_SPI_TEND + 1)
 #elif defined(CONFIG_ARCH_LUBBOCK) || \
+      defined(CONFIG_MACH_LOGICPD_PXA270) || \
       defined(CONFIG_MACH_MAINSTONE)
 #define NR_IRQS                 (IRQ_BOARD_END)
 #else
@@ -196,6 +197,11 @@
 #define LUBBOCK_USB_DISC_IRQ    LUBBOCK_IRQ(6)  /* usb disconnect */
 #define LUBBOCK_LAST_IRQ        LUBBOCK_IRQ(6)
 
+#define LPD270_IRQ(x)           (IRQ_BOARD_START + (x))
+#define LPD270_USBC_IRQ         LPD270_IRQ(2)
+#define LPD270_ETHERNET_IRQ     LPD270_IRQ(3)
+#define LPD270_AC97_IRQ         LPD270_IRQ(4)
+
 #define MAINSTONE_IRQ(x)        (IRQ_BOARD_START + (x))
 #define MAINSTONE_MMC_IRQ       MAINSTONE_IRQ(0)
 #define MAINSTONE_USIM_IRQ      MAINSTONE_IRQ(1)
diff --git a/include/asm-arm/arch-pxa/lpd270.h b/include/asm-arm/arch-pxa/lpd270.h
new file mode 100644
index 000000000000..501d240ac120
--- /dev/null
+++ b/include/asm-arm/arch-pxa/lpd270.h
@@ -0,0 +1,38 @@
+/*
+ * include/asm-arm/arch-pxa/lpd270.h
+ *
+ * Author:      Lennert Buytenhek
+ * Created:     Feb 10, 2006
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_LPD270_H
+#define __ASM_ARCH_LPD270_H
+
+#define LPD270_CPLD_PHYS        PXA_CS2_PHYS
+#define LPD270_CPLD_VIRT        0xf0000000
+#define LPD270_CPLD_SIZE        0x00100000
+
+#define LPD270_ETH_PHYS         (PXA_CS2_PHYS + 0x01000000)
+
+/* CPLD registers  */
+#define LPD270_CPLD_REG(x)      ((unsigned long)(LPD270_CPLD_VIRT + (x)))
+#define LPD270_CONTROL          LPD270_CPLD_REG(0x00)
+#define LPD270_PERIPHERAL0      LPD270_CPLD_REG(0x04)
+#define LPD270_PERIPHERAL1      LPD270_CPLD_REG(0x08)
+#define LPD270_CPLD_REVISION    LPD270_CPLD_REG(0x14)
+#define LPD270_EEPROM_SPI_ITF   LPD270_CPLD_REG(0x20)
+#define LPD270_MODE_PINS        LPD270_CPLD_REG(0x24)
+#define LPD270_EGPIO            LPD270_CPLD_REG(0x30)
+#define LPD270_INT_MASK         LPD270_CPLD_REG(0x40)
+#define LPD270_INT_STATUS       LPD270_CPLD_REG(0x50)
+
+#define LPD270_INT_AC97         (1 << 4)  /* AC'97 CODEC IRQ */
+#define LPD270_INT_ETHERNET     (1 << 3)  /* Ethernet controller IRQ */
+#define LPD270_INT_USBC         (1 << 2)  /* USB client cable detection IRQ */
+
+
+#endif