4 files changed, 391 insertions, 0 deletions

diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 86a369bc57d6..1c35dfaef721 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -103,6 +103,14 @@ config LEDS_HP6XX
           This option enables led support for the handheld
           HP Jornada 620/660/680/690.
 
+config LEDS_PCA9532
+        tristate "LED driver for PCA9532 dimmer"
+        depends on LEDS_CLASS && I2C && INPUT && EXPERIMENTAL
+        help
+          This option enables support for NXP pca9532
+          led controller. It is generally only usefull
+          as a platform driver
+
 config LEDS_GPIO
         tristate "LED Support for GPIO connected LEDs"
         depends on LEDS_CLASS && GENERIC_GPIO
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 973d626f5f4a..7156f9970fa9 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_LEDS_WRAP)			+= leds-wrap.o
 obj-$(CONFIG_LEDS_H1940)                += leds-h1940.o
 obj-$(CONFIG_LEDS_COBALT_QUBE)          += leds-cobalt-qube.o
 obj-$(CONFIG_LEDS_COBALT_RAQ)           += leds-cobalt-raq.o
+obj-$(CONFIG_LEDS_PCA9532)              += leds-pca9532.o
 obj-$(CONFIG_LEDS_GPIO)                 += leds-gpio.o
 obj-$(CONFIG_LEDS_CM_X270)              += leds-cm-x270.o
 obj-$(CONFIG_LEDS_CLEVO_MAIL)           += leds-clevo-mail.o
diff --git a/drivers/leds/leds-pca9532.c b/drivers/leds/leds-pca9532.c
new file mode 100644
index 000000000000..4064d4f6b33b
--- /dev/null
+++ b/drivers/leds/leds-pca9532.c
@@ -0,0 +1,337 @@
+/*
+ * pca9532.c - 16-bit Led dimmer
+ *
+ * Copyright (C) 2008 Riku Voipio <riku.voipio@movial.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * Datasheet: http://www.nxp.com/acrobat/datasheets/PCA9532_3.pdf
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/leds.h>
+#include <linux/input.h>
+#include <linux/mutex.h>
+#include <linux/leds-pca9532.h>
+
+static const unsigned short normal_i2c[] = { /*0x60,*/ I2C_CLIENT_END};
+I2C_CLIENT_INSMOD_1(pca9532);
+
+#define PCA9532_REG_PSC(i) (0x2+(i)*2)
+#define PCA9532_REG_PWM(i) (0x3+(i)*2)
+#define PCA9532_REG_LS0  0x6
+#define LED_REG(led) ((led>>2)+PCA9532_REG_LS0)
+#define LED_NUM(led) (led & 0x3)
+
+#define ldev_to_led(c)       container_of(c, struct pca9532_led, ldev)
+
+struct pca9532_data {
+        struct i2c_client *client;
+        struct pca9532_led leds[16];
+        struct mutex update_lock;
+        struct input_dev    *idev;
+        u8 pwm[2];
+        u8 psc[2];
+};
+
+static int pca9532_probe(struct i2c_client *client,
+        const struct i2c_device_id *id);
+static int pca9532_remove(struct i2c_client *client);
+
+static const struct i2c_device_id pca9532_id[] = {
+        { "pca9532", 0 },
+        { }
+};
+
+MODULE_DEVICE_TABLE(i2c, pca9532_id);
+
+static struct i2c_driver pca9532_driver = {
+        .driver = {
+                .name   = "pca9532",
+        },
+        .probe  = pca9532_probe,
+        .remove = pca9532_remove,
+        .id_table = pca9532_id,
+};
+
+/* We have two pwm/blinkers, but 16 possible leds to drive. Additionaly,
+ * the clever Thecus people are using one pwm to drive the beeper. So,
+ * as a compromise we average one pwm to the values requested by all
+ * leds that are not ON/OFF.
+ * */
+static int pca9532_setpwm(struct i2c_client *client, int pwm, int blink,
+        enum led_brightness value)
+{
+        int a = 0, b = 0, i = 0;
+        struct pca9532_data *data = i2c_get_clientdata(client);
+        for (i = 0; i < 16; i++) {
+                if (data->leds[i].type == PCA9532_TYPE_LED &&
+                        data->leds[i].state == PCA9532_PWM0+pwm) {
+                                a++;
+                                b += data->leds[i].ldev.brightness;
+                }
+        }
+        if (a == 0) {
+                dev_err(&client->dev,
+                "fear of division by zero %d/%d, wanted %d\n",
+                        b, a, value);
+                return -EINVAL;
+        }
+        b = b/a;
+        if (b > 0xFF)
+                return -EINVAL;
+        mutex_lock(&data->update_lock);
+        data->pwm[pwm] = b;
+        i2c_smbus_write_byte_data(client, PCA9532_REG_PWM(pwm),
+                data->pwm[pwm]);
+        data->psc[pwm] = blink;
+        i2c_smbus_write_byte_data(client, PCA9532_REG_PSC(pwm),
+                data->psc[pwm]);
+        mutex_unlock(&data->update_lock);
+        return 0;
+}
+
+/* Set LED routing */
+static void pca9532_setled(struct pca9532_led *led)
+{
+        struct i2c_client *client = led->client;
+        struct pca9532_data *data = i2c_get_clientdata(client);
+        char reg;
+
+        mutex_lock(&data->update_lock);
+        reg = i2c_smbus_read_byte_data(client, LED_REG(led->id));
+        /* zero led bits */
+        reg = reg & ~(0x3<<LED_NUM(led->id)*2);
+        /* set the new value */
+        reg = reg | (led->state << LED_NUM(led->id)*2);
+        i2c_smbus_write_byte_data(client, LED_REG(led->id), reg);
+        mutex_unlock(&data->update_lock);
+}
+
+static void pca9532_set_brightness(struct led_classdev *led_cdev,
+        enum led_brightness value)
+{
+        int err = 0;
+        struct pca9532_led *led = ldev_to_led(led_cdev);
+
+        if (value == LED_OFF)
+                led->state = PCA9532_OFF;
+        else if (value == LED_FULL)
+                led->state = PCA9532_ON;
+        else {
+                led->state = PCA9532_PWM0; /* Thecus: hardcode one pwm */
+                err = pca9532_setpwm(led->client, 0, 0, value);
+                if (err)
+                        return; /* XXX: led api doesn't allow error code? */
+        }
+        pca9532_setled(led);
+}
+
+static int pca9532_set_blink(struct led_classdev *led_cdev,
+        unsigned long *delay_on, unsigned long *delay_off)
+{
+        struct pca9532_led *led = ldev_to_led(led_cdev);
+        struct i2c_client *client = led->client;
+        int psc;
+
+        if (*delay_on == 0 && *delay_off == 0) {
+        /* led subsystem ask us for a blink rate */
+                *delay_on  = 1000;
+                *delay_off = 1000;
+        }
+        if (*delay_on != *delay_off || *delay_on > 1690 || *delay_on < 6)
+                return -EINVAL;
+
+        /* Thecus specific: only use PSC/PWM 0 */
+        psc = (*delay_on * 152-1)/1000;
+        return pca9532_setpwm(client, 0, psc, led_cdev->brightness);
+}
+
+int pca9532_event(struct input_dev *dev, unsigned int type, unsigned int code,
+        int value)
+{
+        struct pca9532_data *data = input_get_drvdata(dev);
+
+        if (type != EV_SND && (code != SND_BELL || code != SND_TONE))
+                return -1;
+
+        /* XXX: allow different kind of beeps with psc/pwm modifications */
+        if (value > 1 && value < 32767)
+                data->pwm[1] = 127;
+        else
+                data->pwm[1] = 0;
+
+        dev_info(&dev->dev, "setting beep to %d \n", data->pwm[1]);
+        mutex_lock(&data->update_lock);
+        i2c_smbus_write_byte_data(data->client, PCA9532_REG_PWM(1),
+                data->pwm[1]);
+        mutex_unlock(&data->update_lock);
+
+        return 0;
+}
+
+static int pca9532_configure(struct i2c_client *client,
+        struct pca9532_data *data, struct pca9532_platform_data *pdata)
+{
+        int i, err = 0;
+
+        for (i = 0; i < 2; i++) {
+                data->pwm[i] = pdata->pwm[i];
+                data->psc[i] = pdata->psc[i];
+                i2c_smbus_write_byte_data(client, PCA9532_REG_PWM(i),
+                        data->pwm[i]);
+                i2c_smbus_write_byte_data(client, PCA9532_REG_PSC(i),
+                        data->psc[i]);
+        }
+
+        for (i = 0; i < 16; i++) {
+                struct pca9532_led *led = &data->leds[i];
+                struct pca9532_led *pled = &pdata->leds[i];
+                led->client = client;
+                led->id = i;
+                led->type = pled->type;
+                switch (led->type) {
+                case PCA9532_TYPE_NONE:
+                        break;
+                case PCA9532_TYPE_LED:
+                        led->state = pled->state;
+                        led->name =  pled->name;
+                        led->ldev.name = led->name;
+                        led->ldev.brightness = LED_OFF;
+                        led->ldev.brightness_set = pca9532_set_brightness;
+                        led->ldev.blink_set = pca9532_set_blink;
+                        if (led_classdev_register(&client->dev,
+                                &led->ldev) < 0)        {
+                                dev_err(&client->dev,
+                                        "couldn't register LED %s\n",
+                                        led->name);
+                                goto exit;
+                        }
+                        pca9532_setled(led);
+                        break;
+                case PCA9532_TYPE_N2100_BEEP:
+                        BUG_ON(data->idev);
+                        led->state = PCA9532_PWM1;
+                        pca9532_setled(led);
+                        data->idev = input_allocate_device();
+                        if (data->idev == NULL) {
+                                err = -ENOMEM;
+                                goto exit;
+                        }
+                        data->idev->name = pled->name;
+                        data->idev->phys = "i2c/pca9532";
+                        data->idev->id.bustype = BUS_HOST;
+                        data->idev->id.vendor  = 0x001f;
+                        data->idev->id.product = 0x0001;
+                        data->idev->id.version = 0x0100;
+                        data->idev->evbit[0] = BIT_MASK(EV_SND);
+                        data->idev->sndbit[0] = BIT_MASK(SND_BELL) |
+                                                BIT_MASK(SND_TONE);
+                        data->idev->event = pca9532_event;
+                        input_set_drvdata(data->idev, data);
+                        err = input_register_device(data->idev);
+                        if (err) {
+                                input_free_device(data->idev);
+                                data->idev = NULL;
+                                goto exit;
+                        }
+                        break;
+                }
+        }
+        return 0;
+
+exit:
+        if (i > 0)
+                for (i = i - 1; i >= 0; i--)
+                        switch (data->leds[i].type) {
+                        case PCA9532_TYPE_NONE:
+                                break;
+                        case PCA9532_TYPE_LED:
+                                led_classdev_unregister(&data->leds[i].ldev);
+                                break;
+                        case PCA9532_TYPE_N2100_BEEP:
+                                if (data->idev != NULL) {
+                                        input_unregister_device(data->idev);
+                                        input_free_device(data->idev);
+                                        data->idev = NULL;
+                                }
+                                break;
+                        }
+
+        return err;
+
+}
+
+static int pca9532_probe(struct i2c_client *client,
+        const struct i2c_device_id *id)
+{
+        struct pca9532_data *data = i2c_get_clientdata(client);
+        struct pca9532_platform_data *pca9532_pdata = client->dev.platform_data;
+
+        if (!i2c_check_functionality(client->adapter,
+                I2C_FUNC_SMBUS_BYTE_DATA))
+                return -EIO;
+
+        data = kzalloc(sizeof(struct pca9532_data), GFP_KERNEL);
+        if (!data)
+                return -ENOMEM;
+
+        dev_info(&client->dev, "setting platform data\n");
+        i2c_set_clientdata(client, data);
+        data->client = client;
+        mutex_init(&data->update_lock);
+
+        if (pca9532_pdata == NULL)
+                return -EIO;
+
+        pca9532_configure(client, data, pca9532_pdata);
+        return 0;
+
+}
+
+static int pca9532_remove(struct i2c_client *client)
+{
+        struct pca9532_data *data = i2c_get_clientdata(client);
+        int i;
+        for (i = 0; i < 16; i++)
+                switch (data->leds[i].type) {
+                case PCA9532_TYPE_NONE:
+                        break;
+                case PCA9532_TYPE_LED:
+                        led_classdev_unregister(&data->leds[i].ldev);
+                        break;
+                case PCA9532_TYPE_N2100_BEEP:
+                        if (data->idev != NULL) {
+                                input_unregister_device(data->idev);
+                                input_free_device(data->idev);
+                                data->idev = NULL;
+                        }
+                        break;
+                }
+
+        kfree(data);
+        i2c_set_clientdata(client, NULL);
+        return 0;
+}
+
+static int __init pca9532_init(void)
+{
+        return i2c_add_driver(&pca9532_driver);
+}
+
+static void __exit pca9532_exit(void)
+{
+        i2c_del_driver(&pca9532_driver);
+}
+
+MODULE_AUTHOR("Riku Voipio <riku.voipio@movial.fi>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("PCA 9532 LED dimmer");
+
+module_init(pca9532_init);
+module_exit(pca9532_exit);
+
diff --git a/include/linux/leds-pca9532.h b/include/linux/leds-pca9532.h
new file mode 100644
index 000000000000..81b4207deb95
--- /dev/null
+++ b/include/linux/leds-pca9532.h
@@ -0,0 +1,45 @@
+/*
+ * pca9532.h - platform data structure for pca9532 led controller
+ *
+ * Copyright (C) 2008 Riku Voipio <riku.voipio@movial.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * Datasheet: http://www.nxp.com/acrobat/datasheets/PCA9532_3.pdf
+ *
+ */
+
+#ifndef __LINUX_PCA9532_H
+#define __LINUX_PCA9532_H
+
+#include <linux/leds.h>
+
+enum pca9532_state {
+        PCA9532_OFF  = 0x0,
+        PCA9532_ON   = 0x1,
+        PCA9532_PWM0 = 0x2,
+        PCA9532_PWM1 = 0x3
+};
+
+enum pca9532_type { PCA9532_TYPE_NONE, PCA9532_TYPE_LED,
+        PCA9532_TYPE_N2100_BEEP };
+
+struct pca9532_led {
+        u8 id;
+        struct i2c_client *client;
+        char *name;
+        struct led_classdev ldev;
+        enum pca9532_type type;
+        enum pca9532_state state;
+};
+
+struct pca9532_platform_data {
+        struct pca9532_led leds[16];
+        u8 pwm[2];
+        u8 psc[2];
+};
+
+#endif /* __LINUX_PCA9532_H */
+