5 files changed, 96 insertions, 92 deletions

diff --git a/drivers/mmc/imxmmc.c b/drivers/mmc/imxmmc.c
index 7ca9e95bdf89..fb6565b98f32 100644
--- a/drivers/mmc/imxmmc.c
+++ b/drivers/mmc/imxmmc.c
@@ -91,6 +91,8 @@ struct imxmci_host {
         int                     dma_allocated;
 
         unsigned char           actual_bus_width;
+
+        int                     prev_cmd_code;
 };
 
 #define IMXMCI_PEND_IRQ_b       0
@@ -248,16 +250,14 @@ static void imxmci_setup_data(struct imxmci_host *host, struct mmc_data *data)
          * partial FIFO fills and reads. The length has to be rounded up to burst size multiple.
          * This is required for SCR read at least.
          */
-        if (datasz < 64) {
+        if (datasz < 512) {
                 host->dma_size = datasz;
                 if (data->flags & MMC_DATA_READ) {
                         host->dma_dir = DMA_FROM_DEVICE;
 
                         /* Hack to enable read SCR */
-                        if(datasz < 16) {
-                                MMC_NOB = 1;
-                                MMC_BLK_LEN = 16;
-                        }
+                        MMC_NOB = 1;
+                        MMC_BLK_LEN = 512;
                 } else {
                         host->dma_dir = DMA_TO_DEVICE;
                 }
@@ -409,6 +409,9 @@ static void imxmci_finish_request(struct imxmci_host *host, struct mmc_request *
 
         spin_unlock_irqrestore(&host->lock, flags);
 
+        if(req && req->cmd)
+                host->prev_cmd_code = req->cmd->opcode;
+
         host->req = NULL;
         host->cmd = NULL;
         host->data = NULL;
@@ -553,7 +556,6 @@ static int imxmci_cpu_driven_data(struct imxmci_host *host, unsigned int *pstat)
 {
         int i;
         int burst_len;
-        int flush_len;
         int trans_done = 0;
         unsigned int stat = *pstat;
 
@@ -566,44 +568,43 @@ static int imxmci_cpu_driven_data(struct imxmci_host *host, unsigned int *pstat)
         dev_dbg(mmc_dev(host->mmc), "imxmci_cpu_driven_data running STATUS = 0x%x\n",
                 stat);
 
+        udelay(20);     /* required for clocks < 8MHz*/
+
         if(host->dma_dir == DMA_FROM_DEVICE) {
                 imxmci_busy_wait_for_status(host, &stat,
                                 STATUS_APPL_BUFF_FF | STATUS_DATA_TRANS_DONE,
-                                20, "imxmci_cpu_driven_data read");
+                                50, "imxmci_cpu_driven_data read");
 
                 while((stat & (STATUS_APPL_BUFF_FF |  STATUS_DATA_TRANS_DONE)) &&
-                      (host->data_cnt < host->dma_size)) {
-                        if(burst_len >= host->dma_size - host->data_cnt) {
-                                flush_len = burst_len;
-                                burst_len = host->dma_size - host->data_cnt;
-                                flush_len -= burst_len;
-                                host->data_cnt = host->dma_size;
-                                trans_done = 1;
-                        } else {
-                                flush_len = 0;
-                                host->data_cnt += burst_len;
-                        }
+                      (host->data_cnt < 512)) {
+
+                        udelay(20);     /* required for clocks < 8MHz*/
 
                         for(i = burst_len; i>=2 ; i-=2) {
-                                *(host->data_ptr++) = MMC_BUFFER_ACCESS;
-                                udelay(20);     /* required for clocks < 8MHz*/
+                                u16 data;
+                                data = MMC_BUFFER_ACCESS;
+                                udelay(10);     /* required for clocks < 8MHz*/
+                                if(host->data_cnt+2 <= host->dma_size) {
+                                        *(host->data_ptr++) = data;
+                                } else {
+                                        if(host->data_cnt < host->dma_size)
+                                                *(u8*)(host->data_ptr) = data;
+                                }
+                                host->data_cnt += 2;
                         }
 
-                        if(i == 1)
-                                *(u8*)(host->data_ptr) = MMC_BUFFER_ACCESS;
-
                         stat = MMC_STATUS;
 
-                        /* Flush extra bytes from FIFO */
-                        while(flush_len && !(stat & STATUS_DATA_TRANS_DONE)){
-                                i = MMC_BUFFER_ACCESS;
-                                stat = MMC_STATUS;
-                                stat &= ~STATUS_CRC_READ_ERR; /* Stupid but required there */
-                        }
-
-                        dev_dbg(mmc_dev(host->mmc), "imxmci_cpu_driven_data read burst %d STATUS = 0x%x\n",
-                                burst_len, stat);
+                        dev_dbg(mmc_dev(host->mmc), "imxmci_cpu_driven_data read %d burst %d STATUS = 0x%x\n",
+                                host->data_cnt, burst_len, stat);
                 }
+
+                if((stat & STATUS_DATA_TRANS_DONE) && (host->data_cnt >= 512))
+                        trans_done = 1;
+
+                if(host->dma_size & 0x1ff)
+                        stat &= ~STATUS_CRC_READ_ERR;
+
         } else {
                 imxmci_busy_wait_for_status(host, &stat,
                                 STATUS_APPL_BUFF_FE,
@@ -692,8 +693,8 @@ static void imxmci_tasklet_fnc(unsigned long data)
                        what, stat, MMC_INT_MASK);
                 dev_err(mmc_dev(host->mmc), "CMD_DAT_CONT = 0x%04x, MMC_BLK_LEN = 0x%04x, MMC_NOB = 0x%04x, DMA_CCR = 0x%08x\n",
                        MMC_CMD_DAT_CONT, MMC_BLK_LEN, MMC_NOB, CCR(host->dma));
-                dev_err(mmc_dev(host->mmc), "CMD%d, bus %d-bit, dma_size = 0x%x\n",
-                       host->cmd?host->cmd->opcode:0, 1<<host->actual_bus_width, host->dma_size);
+                dev_err(mmc_dev(host->mmc), "CMD%d, prevCMD%d, bus %d-bit, dma_size = 0x%x\n",
+                       host->cmd?host->cmd->opcode:0, host->prev_cmd_code, 1<<host->actual_bus_width, host->dma_size);
         }
 
         if(!host->present || timeout)
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index 33525bdf2ab6..74eaaee66de0 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -247,6 +247,55 @@ int mmc_wait_for_app_cmd(struct mmc_host *host, unsigned int rca,
 
 EXPORT_SYMBOL(mmc_wait_for_app_cmd);
 
+/**
+ *      mmc_set_data_timeout - set the timeout for a data command
+ *      @data: data phase for command
+ *      @card: the MMC card associated with the data transfer
+ *      @write: flag to differentiate reads from writes
+ */
+void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card,
+                          int write)
+{
+        unsigned int mult;
+
+        /*
+         * SD cards use a 100 multiplier rather than 10
+         */
+        mult = mmc_card_sd(card) ? 100 : 10;
+
+        /*
+         * Scale up the multiplier (and therefore the timeout) by
+         * the r2w factor for writes.
+         */
+        if (write)
+                mult <<= card->csd.r2w_factor;
+
+        data->timeout_ns = card->csd.tacc_ns * mult;
+        data->timeout_clks = card->csd.tacc_clks * mult;
+
+        /*
+         * SD cards also have an upper limit on the timeout.
+         */
+        if (mmc_card_sd(card)) {
+                unsigned int timeout_us, limit_us;
+
+                timeout_us = data->timeout_ns / 1000;
+                timeout_us += data->timeout_clks * 1000 /
+                        (card->host->ios.clock / 1000);
+
+                if (write)
+                        limit_us = 250000;
+                else
+                        limit_us = 100000;
+
+                if (timeout_us > limit_us) {
+                        data->timeout_ns = limit_us * 1000;
+                        data->timeout_clks = 0;
+                }
+        }
+}
+EXPORT_SYMBOL(mmc_set_data_timeout);
+
 static int mmc_select_card(struct mmc_host *host, struct mmc_card *card);
 
 /**
@@ -908,11 +957,9 @@ static void mmc_read_scrs(struct mmc_host *host)
 {
         int err;
         struct mmc_card *card;
-
         struct mmc_request mrq;
         struct mmc_command cmd;
         struct mmc_data data;
-
         struct scatterlist sg;
 
         list_for_each_entry(card, &host->cards, node) {
@@ -947,8 +994,8 @@ static void mmc_read_scrs(struct mmc_host *host)
 
                 memset(&data, 0, sizeof(struct mmc_data));
 
-                data.timeout_ns = card->csd.tacc_ns * 10;
-                data.timeout_clks = card->csd.tacc_clks * 10;
+                mmc_set_data_timeout(&data, card, 0);
+
                 data.blksz_bits = 3;
                 data.blksz = 1 << 3;
                 data.blocks = 1;
diff --git a/drivers/mmc/mmc_block.c b/drivers/mmc/mmc_block.c
index 115cc21094b9..a0e0dad1b419 100644
--- a/drivers/mmc/mmc_block.c
+++ b/drivers/mmc/mmc_block.c
@@ -30,6 +30,7 @@
 #include <linux/mutex.h>
 
 #include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
 #include <linux/mmc/protocol.h>
 
 #include <asm/system.h>
@@ -171,8 +172,6 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
 
                 brq.cmd.arg = req->sector << 9;
                 brq.cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
-                brq.data.timeout_ns = card->csd.tacc_ns * 10;
-                brq.data.timeout_clks = card->csd.tacc_clks * 10;
                 brq.data.blksz_bits = md->block_bits;
                 brq.data.blksz = 1 << md->block_bits;
                 brq.data.blocks = req->nr_sectors >> (md->block_bits - 9);
@@ -180,6 +179,8 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
                 brq.stop.arg = 0;
                 brq.stop.flags = MMC_RSP_R1B | MMC_CMD_AC;
 
+                mmc_set_data_timeout(&brq.data, card, rq_data_dir(req) != READ);
+
                 if (rq_data_dir(req) == READ) {
                         brq.cmd.opcode = brq.data.blocks > 1 ? MMC_READ_MULTIPLE_BLOCK : MMC_READ_SINGLE_BLOCK;
                         brq.data.flags |= MMC_DATA_READ;
@@ -187,12 +188,6 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
                         brq.cmd.opcode = MMC_WRITE_BLOCK;
                         brq.data.flags |= MMC_DATA_WRITE;
                         brq.data.blocks = 1;
-
-                        /*
-                         * Scale up the timeout by the r2w factor
-                         */
-                        brq.data.timeout_ns <<= card->csd.r2w_factor;
-                        brq.data.timeout_clks <<= card->csd.r2w_factor;
                 }
 
                 if (brq.data.blocks > 1) {
@@ -324,52 +319,11 @@ static struct mmc_blk_data *mmc_blk_alloc(struct mmc_card *card)
         md->read_only = mmc_blk_readonly(card);
 
         /*
-         * Figure out a workable block size.  MMC cards have:
-         *  - two block sizes, one for read and one for write.
-         *  - may support partial reads and/or writes
-         *    (allows block sizes smaller than specified)
-         */
-        md->block_bits = card->csd.read_blkbits;
-        if (card->csd.write_blkbits != card->csd.read_blkbits) {
-                if (card->csd.write_blkbits < card->csd.read_blkbits &&
-                    card->csd.read_partial) {
-                        /*
-                         * write block size is smaller than read block
-                         * size, but we support partial reads, so choose
-                         * the smaller write block size.
-                         */
-                        md->block_bits = card->csd.write_blkbits;
-                } else if (card->csd.write_blkbits > card->csd.read_blkbits &&
-                           card->csd.write_partial) {
-                        /*
-                         * read block size is smaller than write block
-                         * size, but we support partial writes.  Use read
-                         * block size.
-                         */
-                } else {
-                        /*
-                         * We don't support this configuration for writes.
-                         */
-                        printk(KERN_ERR "%s: unable to select block size for "
-                                "writing (rb%u wb%u rp%u wp%u)\n",
-                                mmc_card_id(card),
-                                1 << card->csd.read_blkbits,
-                                1 << card->csd.write_blkbits,
-                                card->csd.read_partial,
-                                card->csd.write_partial);
-                        md->read_only = 1;
-                }
-        }
-
-        /*
-         * Refuse to allow block sizes smaller than 512 bytes.
+         * Both SD and MMC specifications state (although a bit
+         * unclearly in the MMC case) that a block size of 512
+         * bytes must always be supported by the card.
          */
-        if (md->block_bits < 9) {
-                printk(KERN_ERR "%s: unable to support block size %u\n",
-                        mmc_card_id(card), 1 << md->block_bits);
-                ret = -EINVAL;
-                goto err_kfree;
-        }
+        md->block_bits = 9;
 
         md->disk = alloc_disk(1 << MMC_SHIFT);
         if (md->disk == NULL) {
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index c1f021eddffa..ba095aebedff 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -77,7 +77,7 @@ struct mmc_host {
         struct device           *dev;
         struct class_device     class_dev;
         int                     index;
-        struct mmc_host_ops     *ops;
+        const struct mmc_host_ops *ops;
         unsigned int            f_min;
         unsigned int            f_max;
         u32                     ocr_avail;
diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
index 03a14a30c46a..627e2c08ce41 100644
--- a/include/linux/mmc/mmc.h
+++ b/include/linux/mmc/mmc.h
@@ -105,6 +105,8 @@ extern int mmc_wait_for_cmd(struct mmc_host *, struct mmc_command *, int);
 extern int mmc_wait_for_app_cmd(struct mmc_host *, unsigned int,
         struct mmc_command *, int);
 
+extern void mmc_set_data_timeout(struct mmc_data *, const struct mmc_card *, int);
+
 extern int __mmc_claim_host(struct mmc_host *host, struct mmc_card *card);
 
 static inline void mmc_claim_host(struct mmc_host *host)