3 files changed, 54 insertions, 82 deletions

diff --git a/arch/sh/boards/mach-edosk7705/Makefile b/arch/sh/boards/mach-edosk7705/Makefile
index cd54acb51499..0cf5715a78b3 100644
--- a/arch/sh/boards/mach-edosk7705/Makefile
+++ b/arch/sh/boards/mach-edosk7705/Makefile
@@ -2,4 +2,4 @@
 # Makefile for the EDOSK7705 specific parts of the kernel
 #
 
-obj-y    := setup.o io.o
+obj-y    := setup.o
diff --git a/arch/sh/boards/mach-edosk7705/io.c b/arch/sh/boards/mach-edosk7705/io.c
deleted file mode 100644
index 5b9c57c43241..000000000000
--- a/arch/sh/boards/mach-edosk7705/io.c
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * arch/sh/boards/renesas/edosk7705/io.c
- *
- * Copyright (C) 2001  Ian da Silva, Jeremy Siegel
- * Based largely on io_se.c.
- *
- * I/O routines for Hitachi EDOSK7705 board.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/io.h>
-#include <mach/edosk7705.h>
-#include <asm/addrspace.h>
-
-#define SMC_IOADDR      0xA2000000
-
-/* Map the Ethernet addresses as if it is at 0x300 - 0x320 */
-static unsigned long sh_edosk7705_isa_port2addr(unsigned long port)
-{
-        /*
-         * SMC91C96 registers are 4 byte aligned rather than the
-         * usual 2 byte!
-         */
-        if (port >= 0x300 && port < 0x320)
-                return SMC_IOADDR + ((port - 0x300) * 2);
-
-        maybebadio(port);
-        return port;
-}
-
-/* Trying to read / write bytes on odd-byte boundaries to the Ethernet
- * registers causes problems. So we bit-shift the value and read / write
- * in 2 byte chunks. Setting the low byte to 0 does not cause problems
- * now as odd byte writes are only made on the bit mask / interrupt
- * register. This may not be the case in future Mar-2003 SJD
- */
-unsigned char sh_edosk7705_inb(unsigned long port)
-{
-        if (port >= 0x300 && port < 0x320 && port & 0x01)
-                return __raw_readw(port - 1) >> 8;
-
-        return __raw_readb(sh_edosk7705_isa_port2addr(port));
-}
-
-void sh_edosk7705_outb(unsigned char value, unsigned long port)
-{
-        if (port >= 0x300 && port < 0x320 && port & 0x01) {
-                __raw_writew(((unsigned short)value << 8), port - 1);
-                return;
-        }
-
-        __raw_writeb(value, sh_edosk7705_isa_port2addr(port));
-}
-
-void sh_edosk7705_insb(unsigned long port, void *addr, unsigned long count)
-{
-        unsigned char *p = addr;
-
-        while (count--)
-                *p++ = sh_edosk7705_inb(port);
-}
-
-void sh_edosk7705_outsb(unsigned long port, const void *addr, unsigned long count)
-{
-        unsigned char *p = (unsigned char *)addr;
-
-        while (count--)
-                sh_edosk7705_outb(*p++, port);
-}
diff --git a/arch/sh/boards/mach-edosk7705/setup.c b/arch/sh/boards/mach-edosk7705/setup.c
index d59225e26fb9..8f93b6636900 100644
--- a/arch/sh/boards/mach-edosk7705/setup.c
+++ b/arch/sh/boards/mach-edosk7705/setup.c
@@ -10,27 +10,70 @@
  */
 #include <linux/init.h>
 #include <linux/irq.h>
-#include <asm/machvec.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/smc91x.h>
 #include <mach/edosk7705.h>
+#include <asm/machvec.h>
+#include <asm/sizes.h>
+
+#define SMC_IOBASE      0xA2000000
+#define SMC_IO_OFFSET   0x300
+#define SMC_IOADDR      (SMC_IOBASE + SMC_IO_OFFSET)
+
+#define ETHERNET_IRQ    0x09
 
 static void __init sh_edosk7705_init_irq(void)
 {
-        /* This is the Ethernet interrupt */
-        make_imask_irq(0x09);
+        make_imask_irq(ETHERNET_IRQ);
 }
 
+/* eth initialization functions */
+static struct smc91x_platdata smc91x_info = {
+        .flags = SMC91X_USE_16BIT | SMC91X_IO_SHIFT_1 | IORESOURCE_IRQ_LOWLEVEL,
+};
+
+static struct resource smc91x_res[] = {
+        [0] = {
+                .start  = SMC_IOADDR,
+                .end    = SMC_IOADDR + SZ_32 - 1,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = ETHERNET_IRQ,
+                .end    = ETHERNET_IRQ,
+                .flags  = IORESOURCE_IRQ ,
+        }
+};
+
+static struct platform_device smc91x_dev = {
+        .name           = "smc91x",
+        .id             = -1,
+        .num_resources  = ARRAY_SIZE(smc91x_res),
+        .resource       = smc91x_res,
+
+        .dev    = {
+                .platform_data  = &smc91x_info,
+        },
+};
+
+/* platform init code */
+static struct platform_device *edosk7705_devices[] __initdata = {
+        &smc91x_dev,
+};
+
+static int __init init_edosk7705_devices(void)
+{
+        return platform_add_devices(edosk7705_devices,
+                                    ARRAY_SIZE(edosk7705_devices));
+}
+__initcall(init_edosk7705_devices);
+
 /*
  * The Machine Vector
  */
 static struct sh_machine_vector mv_edosk7705 __initmv = {
         .mv_name                = "EDOSK7705",
         .mv_nr_irqs             = 80,
-
-        .mv_inb                 = sh_edosk7705_inb,
-        .mv_outb                = sh_edosk7705_outb,
-
-        .mv_insb                = sh_edosk7705_insb,
-        .mv_outsb               = sh_edosk7705_outsb,
-
         .mv_init_irq            = sh_edosk7705_init_irq,
 };