14 files changed, 78 insertions, 48 deletions

diff --git a/arch/powerpc/include/asm/cpm.h b/arch/powerpc/include/asm/cpm.h
index 0835eb977ba9..e50323fe941f 100644
--- a/arch/powerpc/include/asm/cpm.h
+++ b/arch/powerpc/include/asm/cpm.h
@@ -7,6 +7,30 @@
 #include <linux/of.h>
 
 /*
+ * SPI Parameter RAM common to QE and CPM.
+ */
+struct spi_pram {
+        __be16  rbase;  /* Rx Buffer descriptor base address */
+        __be16  tbase;  /* Tx Buffer descriptor base address */
+        u8      rfcr;   /* Rx function code */
+        u8      tfcr;   /* Tx function code */
+        __be16  mrblr;  /* Max receive buffer length */
+        __be32  rstate; /* Internal */
+        __be32  rdp;    /* Internal */
+        __be16  rbptr;  /* Internal */
+        __be16  rbc;    /* Internal */
+        __be32  rxtmp;  /* Internal */
+        __be32  tstate; /* Internal */
+        __be32  tdp;    /* Internal */
+        __be16  tbptr;  /* Internal */
+        __be16  tbc;    /* Internal */
+        __be32  txtmp;  /* Internal */
+        __be32  res;    /* Tx temp. */
+        __be16  rpbase; /* Relocation pointer (CPM1 only) */
+        __be16  res1;   /* Reserved */
+};
+
+/*
  * USB Controller pram common to QE and CPM.
  */
 struct usb_ctlr {
diff --git a/arch/powerpc/include/asm/cpm1.h b/arch/powerpc/include/asm/cpm1.h
index 81b01192f440..bd07650dca56 100644
--- a/arch/powerpc/include/asm/cpm1.h
+++ b/arch/powerpc/include/asm/cpm1.h
@@ -17,6 +17,7 @@
 #ifndef __CPM1__
 #define __CPM1__
 
+#include <linux/init.h>
 #include <asm/8xx_immap.h>
 #include <asm/ptrace.h>
 #include <asm/cpm.h>
@@ -54,7 +55,7 @@ extern cpm8xx_t __iomem *cpmp; /* Pointer to comm processor */
 
 extern void cpm_setbrg(uint brg, uint rate);
 
-extern void cpm_load_patch(cpm8xx_t *cp);
+extern void __init cpm_load_patch(cpm8xx_t *cp);
 
 extern void cpm_reset(void);
 
diff --git a/arch/powerpc/kernel/fsl_booke_entry_mapping.S b/arch/powerpc/kernel/fsl_booke_entry_mapping.S
index beb4d78a2304..a92c79be2728 100644
--- a/arch/powerpc/kernel/fsl_booke_entry_mapping.S
+++ b/arch/powerpc/kernel/fsl_booke_entry_mapping.S
@@ -205,8 +205,7 @@ next_tlb_setup:
         bdnz+   next_tlb_setup
 
 /* 7. Jump to our 1:1 mapping */
-        li      r6, 0
-
+        mr      r6, r25
 #else
         #error You need to specify the mapping or not use this at all.
 #endif
@@ -217,7 +216,6 @@ next_tlb_setup:
 1:      mflr    r9
         rlwimi  r6,r9,0,20,31
         addi    r6,r6,(2f - 1b)
-        add     r6, r6, r25
         mtspr   SPRN_SRR0,r6
         mtspr   SPRN_SRR1,r7
         rfi                             /* start execution out of TLB1[0] entry */
diff --git a/arch/powerpc/sysdev/micropatch.c b/arch/powerpc/sysdev/micropatch.c
index d8d602840757..c0bb76ef7242 100644
--- a/arch/powerpc/sysdev/micropatch.c
+++ b/arch/powerpc/sysdev/micropatch.c
@@ -4,6 +4,7 @@
  * also relocates SMC2, but this would require additional changes
  * to uart.c, so I am holding off on that for a moment.
  */
+#include <linux/init.h>
 #include <linux/errno.h>
 #include <linux/sched.h>
 #include <linux/kernel.h>
@@ -16,6 +17,7 @@
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/8xx_immap.h>
+#include <asm/cpm.h>
 #include <asm/cpm1.h>
 
 /*
@@ -24,7 +26,7 @@
 
 #ifdef CONFIG_I2C_SPI_UCODE_PATCH
 
-uint patch_2000[] = {
+static uint patch_2000[] __initdata = {
         0x7FFFEFD9,
         0x3FFD0000,
         0x7FFB49F7,
@@ -143,7 +145,7 @@ uint patch_2000[] = {
         0x5F8247F8
 };
 
-uint patch_2f00[] = {
+static uint patch_2f00[] __initdata = {
         0x3E303430,
         0x34343737,
         0xABF7BF9B,
@@ -182,7 +184,7 @@ uint patch_2f00[] = {
 
 #ifdef CONFIG_I2C_SPI_SMC1_UCODE_PATCH
 
-uint patch_2000[] = {
+static uint patch_2000[] __initdata = {
         0x3fff0000,
         0x3ffd0000,
         0x3ffb0000,
@@ -505,7 +507,7 @@ uint patch_2000[] = {
         0x6079e2bb
 };
 
-uint patch_2f00[] = {
+static uint patch_2f00[] __initdata = {
         0x30303030,
         0x3e3e3434,
         0xabbf9b99,
@@ -572,7 +574,7 @@ uint patch_2f00[] = {
         0xf22f3f23
 };
 
-uint patch_2e00[] = {
+static uint patch_2e00[] __initdata = {
         0x27eeeeee,
         0xeeeeeeee,
         0xeeeeeeee,
@@ -598,7 +600,7 @@ uint patch_2e00[] = {
 
 #ifdef CONFIG_USB_SOF_UCODE_PATCH
 
-uint patch_2000[] = {
+static uint patch_2000[] __initdata = {
         0x7fff0000,
         0x7ffd0000,
         0x7ffb0000,
@@ -613,21 +615,25 @@ uint patch_2000[] = {
         0x60750000
 };
 
-uint patch_2f00[] = {
+static uint patch_2f00[] __initdata = {
         0x3030304c,
         0xcab9e441,
         0xa1aaf220
 };
 #endif
 
-void
-cpm_load_patch(cpm8xx_t *cp)
+void __init cpm_load_patch(cpm8xx_t *cp)
 {
         volatile uint           *dp;            /* Dual-ported RAM. */
         volatile cpm8xx_t       *commproc;
+#if defined(CONFIG_I2C_SPI_UCODE_PATCH) || \
+    defined(CONFIG_I2C_SPI_SMC1_UCODE_PATCH)
         volatile iic_t          *iip;
-        volatile spi_t          *spp;
+        volatile struct spi_pram *spp;
+#ifdef CONFIG_I2C_SPI_SMC1_UCODE_PATCH
         volatile smc_uart_t     *smp;
+#endif
+#endif
         int     i;
 
         commproc = cp;
@@ -668,8 +674,8 @@ cpm_load_patch(cpm8xx_t	*cp)
         /* Put SPI above the IIC, also 32-byte aligned.
         */
         i = (RPBASE + sizeof(iic_t) + 31) & ~31;
-        spp = (spi_t *)&commproc->cp_dparam[PROFF_SPI];
-        spp->spi_rpbase = i;
+        spp = (struct spi_pram *)&commproc->cp_dparam[PROFF_SPI];
+        spp->rpbase = i;
 
 # if defined(CONFIG_I2C_SPI_UCODE_PATCH)
         commproc->cp_cpmcr1 = 0x802a;
diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h
index 519b54327d75..baa579c8e038 100644
--- a/arch/x86/include/asm/x86_init.h
+++ b/arch/x86/include/asm/x86_init.h
@@ -142,6 +142,7 @@ struct x86_cpuinit_ops {
  * @set_wallclock:              set time back to HW clock
  * @is_untracked_pat_range      exclude from PAT logic
  * @nmi_init                    enable NMI on cpus
+ * @i8042_detect                pre-detect if i8042 controller exists
  */
 struct x86_platform_ops {
         unsigned long (*calibrate_tsc)(void);
@@ -150,6 +151,7 @@ struct x86_platform_ops {
         void (*iommu_shutdown)(void);
         bool (*is_untracked_pat_range)(u64 start, u64 end);
         void (*nmi_init)(void);
+        int (*i8042_detect)(void);
 };
 
 extern struct x86_init_ops x86_init;
diff --git a/arch/x86/kernel/mrst.c b/arch/x86/kernel/mrst.c
index e796448f0eb5..5915e0b33303 100644
--- a/arch/x86/kernel/mrst.c
+++ b/arch/x86/kernel/mrst.c
@@ -216,6 +216,12 @@ static void __init mrst_setup_boot_clock(void)
                 setup_boot_APIC_clock();
 };
 
+/* MID systems don't have i8042 controller */
+static int mrst_i8042_detect(void)
+{
+        return 0;
+}
+
 /*
  * Moorestown specific x86_init function overrides and early setup
  * calls.
@@ -233,6 +239,7 @@ void __init x86_mrst_early_setup(void)
         x86_cpuinit.setup_percpu_clockev = mrst_setup_secondary_clock;
 
         x86_platform.calibrate_tsc = mrst_calibrate_tsc;
+        x86_platform.i8042_detect = mrst_i8042_detect;
         x86_init.pci.init = pci_mrst_init;
         x86_init.pci.fixup_irqs = x86_init_noop;
 
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index 61a1e8c7e19f..cd6da6bf3eca 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -5,6 +5,7 @@
  */
 #include <linux/init.h>
 #include <linux/ioport.h>
+#include <linux/module.h>
 
 #include <asm/bios_ebda.h>
 #include <asm/paravirt.h>
@@ -85,6 +86,7 @@ struct x86_cpuinit_ops x86_cpuinit __cpuinitdata = {
 };
 
 static void default_nmi_init(void) { };
+static int default_i8042_detect(void) { return 1; };
 
 struct x86_platform_ops x86_platform = {
         .calibrate_tsc                  = native_calibrate_tsc,
@@ -92,5 +94,8 @@ struct x86_platform_ops x86_platform = {
         .set_wallclock                  = mach_set_rtc_mmss,
         .iommu_shutdown                 = iommu_shutdown_noop,
         .is_untracked_pat_range         = is_ISA_range,
-        .nmi_init                       = default_nmi_init
+        .nmi_init                       = default_nmi_init,
+        .i8042_detect                   = default_i8042_detect
 };
+
+EXPORT_SYMBOL_GPL(x86_platform);
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index a6f695d76928..3699613e8830 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -1879,6 +1879,8 @@ static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *sptep,
                         pgprintk("hfn old %lx new %lx\n",
                                  spte_to_pfn(*sptep), pfn);
                         rmap_remove(vcpu->kvm, sptep);
+                        __set_spte(sptep, shadow_trap_nonpresent_pte);
+                        kvm_flush_remote_tlbs(vcpu->kvm);
                 } else
                         was_rmapped = 1;
         }
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 859a01a07dbf..ee03679efe78 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -1744,18 +1744,15 @@ static void enter_lmode(struct kvm_vcpu *vcpu)
                              (guest_tr_ar & ~AR_TYPE_MASK)
                              | AR_TYPE_BUSY_64_TSS);
         }
-        vcpu->arch.efer |= EFER_LMA;
-        vmx_set_efer(vcpu, vcpu->arch.efer);
+        vmx_set_efer(vcpu, vcpu->arch.efer | EFER_LMA);
 }
 
 static void exit_lmode(struct kvm_vcpu *vcpu)
 {
-        vcpu->arch.efer &= ~EFER_LMA;
-
         vmcs_write32(VM_ENTRY_CONTROLS,
                      vmcs_read32(VM_ENTRY_CONTROLS)
                      & ~VM_ENTRY_IA32E_MODE);
-        vmx_set_efer(vcpu, vcpu->arch.efer);
+        vmx_set_efer(vcpu, vcpu->arch.efer & ~EFER_LMA);
 }
 
 #endif
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 0f9a4785d798..3525f533e186 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -69,11 +69,11 @@ config KEYBOARD_ATARI
           module will be called atakbd.
 
 config KEYBOARD_ATKBD
-        tristate "AT keyboard" if EMBEDDED || !X86 || X86_MRST
+        tristate "AT keyboard" if EMBEDDED || !X86
         default y
         select SERIO
         select SERIO_LIBPS2
-        select SERIO_I8042 if X86 && !X86_MRST
+        select SERIO_I8042 if X86
         select SERIO_GSCPS2 if GSC
         help
           Say Y here if you want to use a standard AT or PS/2 keyboard. Usually
diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig
index eeb58c1cac16..c714ca2407f8 100644
--- a/drivers/input/mouse/Kconfig
+++ b/drivers/input/mouse/Kconfig
@@ -17,7 +17,7 @@ config MOUSE_PS2
         default y
         select SERIO
         select SERIO_LIBPS2
-        select SERIO_I8042 if X86 && !X86_MRST
+        select SERIO_I8042 if X86
         select SERIO_GSCPS2 if GSC
         help
           Say Y here if you have a PS/2 mouse connected to your system. This
diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig
index 256b9e9394dc..3bfe8fafc6ad 100644
--- a/drivers/input/serio/Kconfig
+++ b/drivers/input/serio/Kconfig
@@ -22,7 +22,7 @@ config SERIO_I8042
         tristate "i8042 PC Keyboard controller" if EMBEDDED || !X86
         default y
         depends on !PARISC && (!ARM || ARCH_SHARK || FOOTBRIDGE_HOST) && \
-                   (!SUPERH || SH_CAYMAN) && !M68K && !BLACKFIN && !X86_MRST
+                   (!SUPERH || SH_CAYMAN) && !M68K && !BLACKFIN
         help
           i8042 is the chip over which the standard AT keyboard and PS/2
           mouse are connected to the computer. If you use these devices,
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index 6168469ad1a6..81003c4739f4 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -7,6 +7,10 @@
  * the Free Software Foundation.
  */
 
+#ifdef CONFIG_X86
+#include <asm/x86_init.h>
+#endif
+
 /*
  * Names.
  */
@@ -840,6 +844,12 @@ static int __init i8042_platform_init(void)
 {
         int retval;
 
+#ifdef CONFIG_X86
+        /* Just return if pre-detection shows no i8042 controller exist */
+        if (!x86_platform.i8042_detect())
+                return -ENODEV;
+#endif
+
 /*
  * On ix86 platforms touching the i8042 data register region can do really
  * bad things. Because of this the region is always reserved on ix86 boxes.
diff --git a/drivers/spi/spi_mpc8xxx.c b/drivers/spi/spi_mpc8xxx.c
index ffa111a7e9d4..97ab0a81338a 100644
--- a/drivers/spi/spi_mpc8xxx.c
+++ b/drivers/spi/spi_mpc8xxx.c
@@ -66,28 +66,6 @@ struct mpc8xxx_spi_reg {
         __be32 receive;
 };
 
-/* SPI Parameter RAM */
-struct spi_pram {
-        __be16  rbase;  /* Rx Buffer descriptor base address */
-        __be16  tbase;  /* Tx Buffer descriptor base address */
-        u8      rfcr;   /* Rx function code */
-        u8      tfcr;   /* Tx function code */
-        __be16  mrblr;  /* Max receive buffer length */
-        __be32  rstate; /* Internal */
-        __be32  rdp;    /* Internal */
-        __be16  rbptr;  /* Internal */
-        __be16  rbc;    /* Internal */
-        __be32  rxtmp;  /* Internal */
-        __be32  tstate; /* Internal */
-        __be32  tdp;    /* Internal */
-        __be16  tbptr;  /* Internal */
-        __be16  tbc;    /* Internal */
-        __be32  txtmp;  /* Internal */
-        __be32  res;    /* Tx temp. */
-        __be16  rpbase; /* Relocation pointer (CPM1 only) */
-        __be16  res1;   /* Reserved */
-};
-
 /* SPI Controller mode register definitions */
 #define SPMODE_LOOP             (1 << 30)
 #define SPMODE_CI_INACTIVEHIGH  (1 << 29)