aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/arm/mach-omap2/Makefile2
-rw-r--r--arch/arm/mach-omap2/clock.c2
-rw-r--r--arch/arm/mach-omap2/clock24xx.c319
-rw-r--r--arch/arm/mach-omap2/clock24xx.h320
-rw-r--r--arch/arm/mach-omap2/memory.c48
-rw-r--r--arch/arm/mach-omap2/memory.h2
-rw-r--r--arch/arm/plat-omap/clock.c42
-rw-r--r--include/asm-arm/arch-omap/clock.h65
8 files changed, 562 insertions, 238 deletions
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index be2b671552a6..a3b2507fcc58 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -3,7 +3,7 @@
3# 3#
4 4
5# Common support 5# Common support
6obj-y := irq.o id.o io.o sram-fn.o memory.o control.o prcm.o mux.o \ 6obj-y := irq.o id.o io.o sram-fn.o memory.o control.o prcm.o clock.o mux.o \
7 devices.o serial.o gpmc.o timer-gp.o 7 devices.o serial.o gpmc.o timer-gp.o
8 8
9# Power Management 9# Power Management
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index a921efd43a70..b76c9fc1b8e9 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -122,7 +122,7 @@ u32 omap2_get_dpll_rate(struct clk *clk)
122 if (dd->div2_reg) { 122 if (dd->div2_reg) {
123 dpll = __raw_readl(dd->div2_reg); 123 dpll = __raw_readl(dd->div2_reg);
124 dpll_div = dpll & dd->div2_mask; 124 dpll_div = dpll & dd->div2_mask;
125 dpll_div >>= __fss(dd->div2_mask); 125 dpll_div >>= __ffs(dd->div2_mask);
126 do_div(dpll_clk, dpll_div + 1); 126 do_div(dpll_clk, dpll_div + 1);
127 } 127 }
128 128
diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c
index 5c24781f6d9b..c3ccac1b7218 100644
--- a/arch/arm/mach-omap2/clock24xx.c
+++ b/arch/arm/mach-omap2/clock24xx.c
@@ -15,6 +15,8 @@
15 * it under the terms of the GNU General Public License version 2 as 15 * it under the terms of the GNU General Public License version 2 as
16 * published by the Free Software Foundation. 16 * published by the Free Software Foundation.
17 */ 17 */
18#undef DEBUG
19
18#include <linux/module.h> 20#include <linux/module.h>
19#include <linux/kernel.h> 21#include <linux/kernel.h>
20#include <linux/device.h> 22#include <linux/device.h>
@@ -23,29 +25,64 @@
23#include <linux/delay.h> 25#include <linux/delay.h>
24#include <linux/clk.h> 26#include <linux/clk.h>
25 27
26#include <asm/io.h> 28#include <linux/io.h>
29#include <linux/cpufreq.h>
27 30
28#include <asm/arch/clock.h> 31#include <asm/arch/clock.h>
29#include <asm/arch/sram.h> 32#include <asm/arch/sram.h>
30#include <asm/div64.h> 33#include <asm/div64.h>
34#include <asm/bitops.h>
31 35
32#include "prcm-regs.h"
33#include "memory.h" 36#include "memory.h"
37#include "clock.h"
34#include "clock24xx.h" 38#include "clock24xx.h"
39#include "prm.h"
40#include "prm-regbits-24xx.h"
41#include "cm.h"
42#include "cm-regbits-24xx.h"
35 43
36#undef DEBUG 44/* CM_CLKEN_PLL.EN_{54,96}M_PLL options (24XX) */
45#define EN_APLL_STOPPED 0
46#define EN_APLL_LOCKED 3
37 47
38//#define DOWN_VARIABLE_DPLL 1 /* Experimental */ 48/* CM_CLKSEL1_PLL.APLLS_CLKIN options (24XX) */
49#define APLLS_CLKIN_19_2MHZ 0
50#define APLLS_CLKIN_13MHZ 2
51#define APLLS_CLKIN_12MHZ 3
52
53/* #define DOWN_VARIABLE_DPLL 1 */ /* Experimental */
39 54
40static struct prcm_config *curr_prcm_set; 55static struct prcm_config *curr_prcm_set;
41static u32 curr_perf_level = PRCM_FULL_SPEED;
42static struct clk *vclk; 56static struct clk *vclk;
43static struct clk *sclk; 57static struct clk *sclk;
44 58
45/*------------------------------------------------------------------------- 59/*-------------------------------------------------------------------------
46 * Omap2 specific clock functions 60 * Omap24xx specific clock functions
47 *-------------------------------------------------------------------------*/ 61 *-------------------------------------------------------------------------*/
48 62
63static int omap2_enable_osc_ck(struct clk *clk)
64{
65 u32 pcc;
66
67 pcc = __raw_readl(OMAP24XX_PRCM_CLKSRC_CTRL);
68
69 __raw_writel(pcc & ~OMAP_AUTOEXTCLKMODE_MASK,
70 OMAP24XX_PRCM_CLKSRC_CTRL);
71
72 return 0;
73}
74
75static void omap2_disable_osc_ck(struct clk *clk)
76{
77 u32 pcc;
78
79 pcc = __raw_readl(OMAP24XX_PRCM_CLKSRC_CTRL);
80
81 __raw_writel(pcc | OMAP_AUTOEXTCLKMODE_MASK,
82 OMAP24XX_PRCM_CLKSRC_CTRL);
83}
84
85#ifdef OLD_CK
49/* Recalculate SYST_CLK */ 86/* Recalculate SYST_CLK */
50static void omap2_sys_clk_recalc(struct clk * clk) 87static void omap2_sys_clk_recalc(struct clk * clk)
51{ 88{
@@ -55,17 +92,18 @@ static void omap2_sys_clk_recalc(struct clk * clk)
55 clk->rate = (clk->parent->rate / div); 92 clk->rate = (clk->parent->rate / div);
56 propagate_rate(clk); 93 propagate_rate(clk);
57} 94}
95#endif /* OLD_CK */
58 96
59static u32 omap2_get_dpll_rate(struct clk * tclk) 97/* This actually returns the rate of core_ck, not dpll_ck. */
98static u32 omap2_get_dpll_rate_24xx(struct clk *tclk)
60{ 99{
61 long long dpll_clk; 100 long long dpll_clk;
62 int dpll_mult, dpll_div, amult; 101 u8 amult;
102
103 dpll_clk = omap2_get_dpll_rate(tclk);
63 104
64 dpll_mult = (CM_CLKSEL1_PLL >> 12) & 0x03ff; /* 10 bits */ 105 amult = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
65 dpll_div = (CM_CLKSEL1_PLL >> 8) & 0x0f; /* 4 bits */ 106 amult &= OMAP24XX_CORE_CLK_SRC_MASK;
66 dpll_clk = (long long)tclk->parent->rate * dpll_mult;
67 do_div(dpll_clk, dpll_div + 1);
68 amult = CM_CLKSEL2_PLL & 0x3;
69 dpll_clk *= amult; 107 dpll_clk *= amult;
70 108
71 return dpll_clk; 109 return dpll_clk;
@@ -84,6 +122,7 @@ static void omap2_propagate_rate(struct clk * clk)
84 propagate_rate(clk); 122 propagate_rate(clk);
85} 123}
86 124
125#ifdef OLD_CK
87static void omap2_set_osc_ck(int enable) 126static void omap2_set_osc_ck(int enable)
88{ 127{
89 if (enable) 128 if (enable)
@@ -91,39 +130,40 @@ static void omap2_set_osc_ck(int enable)
91 else 130 else
92 PRCM_CLKSRC_CTRL |= 0x3 << 3; 131 PRCM_CLKSRC_CTRL |= 0x3 << 3;
93} 132}
133#endif /* OLD_CK */
94 134
95/* Enable an APLL if off */ 135/* Enable an APLL if off */
96static void omap2_clk_fixed_enable(struct clk *clk) 136static int omap2_clk_fixed_enable(struct clk *clk)
97{ 137{
98 u32 cval, i=0; 138 u32 cval, apll_mask;
99 139
100 if (clk->enable_bit == 0xff) /* Parent will do it */ 140 apll_mask = EN_APLL_LOCKED << clk->enable_bit;
101 return;
102 141
103 cval = CM_CLKEN_PLL; 142 cval = cm_read_mod_reg(PLL_MOD, CM_CLKEN);
104 143
105 if ((cval & (0x3 << clk->enable_bit)) == (0x3 << clk->enable_bit)) 144 if ((cval & apll_mask) == apll_mask)
106 return; 145 return 0; /* apll already enabled */
107 146
108 cval &= ~(0x3 << clk->enable_bit); 147 cval &= ~apll_mask;
109 cval |= (0x3 << clk->enable_bit); 148 cval |= apll_mask;
110 CM_CLKEN_PLL = cval; 149 cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN);
111 150
112 if (clk == &apll96_ck) 151 if (clk == &apll96_ck)
113 cval = (1 << 8); 152 cval = OMAP24XX_ST_96M_APLL;
114 else if (clk == &apll54_ck) 153 else if (clk == &apll54_ck)
115 cval = (1 << 6); 154 cval = OMAP24XX_ST_54M_APLL;
116 155
117 while (!(CM_IDLEST_CKGEN & cval)) { /* Wait for lock */ 156 omap2_wait_clock_ready(OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), cval,
118 ++i; 157 clk->name);
119 udelay(1); 158
120 if (i == 100000) { 159 /*
121 printk(KERN_ERR "Clock %s didn't lock\n", clk->name); 160 * REVISIT: Should we return an error code if omap2_wait_clock_ready()
122 break; 161 * fails?
123 } 162 */
124 } 163 return 0;
125} 164}
126 165
166#ifdef OLD_CK
127static void omap2_clk_wait_ready(struct clk *clk) 167static void omap2_clk_wait_ready(struct clk *clk)
128{ 168{
129 unsigned long reg, other_reg, st_reg; 169 unsigned long reg, other_reg, st_reg;
@@ -199,20 +239,19 @@ static int _omap2_clk_enable(struct clk * clk)
199 239
200 return 0; 240 return 0;
201} 241}
242#endif /* OLD_CK */
202 243
203/* Stop APLL */ 244/* Stop APLL */
204static void omap2_clk_fixed_disable(struct clk *clk) 245static void omap2_clk_fixed_disable(struct clk *clk)
205{ 246{
206 u32 cval; 247 u32 cval;
207 248
208 if(clk->enable_bit == 0xff) /* let parent off do it */ 249 cval = cm_read_mod_reg(PLL_MOD, CM_CLKEN);
209 return; 250 cval &= ~(EN_APLL_LOCKED << clk->enable_bit);
210 251 cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN);
211 cval = CM_CLKEN_PLL;
212 cval &= ~(0x3 << clk->enable_bit);
213 CM_CLKEN_PLL = cval;
214} 252}
215 253
254#ifdef OLD_CK
216/* Disables clock without considering parent dependencies or use count */ 255/* Disables clock without considering parent dependencies or use count */
217static void _omap2_clk_disable(struct clk *clk) 256static void _omap2_clk_disable(struct clk *clk)
218{ 257{
@@ -269,6 +308,7 @@ static void omap2_clk_disable(struct clk *clk)
269 omap2_clk_disable(clk->parent); 308 omap2_clk_disable(clk->parent);
270 } 309 }
271} 310}
311#endif /* OLD_CK */
272 312
273/* 313/*
274 * Uses the current prcm set to tell if a rate is valid. 314 * Uses the current prcm set to tell if a rate is valid.
@@ -276,9 +316,12 @@ static void omap2_clk_disable(struct clk *clk)
276 */ 316 */
277static u32 omap2_dpll_round_rate(unsigned long target_rate) 317static u32 omap2_dpll_round_rate(unsigned long target_rate)
278{ 318{
279 u32 high, low; 319 u32 high, low, core_clk_src;
280 320
281 if ((CM_CLKSEL2_PLL & 0x3) == 1) { /* DPLL clockout */ 321 core_clk_src = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
322 core_clk_src &= OMAP24XX_CORE_CLK_SRC_MASK;
323
324 if (core_clk_src == CORE_CLK_SRC_DPLL) { /* DPLL clockout */
282 high = curr_prcm_set->dpll_speed * 2; 325 high = curr_prcm_set->dpll_speed * 2;
283 low = curr_prcm_set->dpll_speed; 326 low = curr_prcm_set->dpll_speed;
284 } else { /* DPLL clockout x 2 */ 327 } else { /* DPLL clockout x 2 */
@@ -300,6 +343,7 @@ static u32 omap2_dpll_round_rate(unsigned long target_rate)
300 343
301} 344}
302 345
346#ifdef OLD_CK
303/* 347/*
304 * Used for clocks that are part of CLKSEL_xyz governed clocks. 348 * Used for clocks that are part of CLKSEL_xyz governed clocks.
305 * REVISIT: Maybe change to use clk->enable() functions like on omap1? 349 * REVISIT: Maybe change to use clk->enable() functions like on omap1?
@@ -486,55 +530,72 @@ static u32 omap2_reprogram_sdrc(u32 level, u32 force)
486 530
487 return prev; 531 return prev;
488} 532}
533#endif /* OLD_CK */
534
535static void omap2_dpll_recalc(struct clk *clk)
536{
537 clk->rate = omap2_get_dpll_rate_24xx(clk);
538
539 propagate_rate(clk);
540}
489 541
490static int omap2_reprogram_dpll(struct clk * clk, unsigned long rate) 542static int omap2_reprogram_dpll(struct clk *clk, unsigned long rate)
491{ 543{
492 u32 flags, cur_rate, low, mult, div, valid_rate, done_rate; 544 u32 cur_rate, low, mult, div, valid_rate, done_rate;
493 u32 bypass = 0; 545 u32 bypass = 0;
494 struct prcm_config tmpset; 546 struct prcm_config tmpset;
547 const struct dpll_data *dd;
548 unsigned long flags;
495 int ret = -EINVAL; 549 int ret = -EINVAL;
496 550
497 local_irq_save(flags); 551 local_irq_save(flags);
498 cur_rate = omap2_get_dpll_rate(&dpll_ck); 552 cur_rate = omap2_get_dpll_rate_24xx(&dpll_ck);
499 mult = CM_CLKSEL2_PLL & 0x3; 553 mult = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
554 mult &= OMAP24XX_CORE_CLK_SRC_MASK;
500 555
501 if ((rate == (cur_rate / 2)) && (mult == 2)) { 556 if ((rate == (cur_rate / 2)) && (mult == 2)) {
502 omap2_reprogram_sdrc(PRCM_HALF_SPEED, 1); 557 omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL, 1);
503 } else if ((rate == (cur_rate * 2)) && (mult == 1)) { 558 } else if ((rate == (cur_rate * 2)) && (mult == 1)) {
504 omap2_reprogram_sdrc(PRCM_FULL_SPEED, 1); 559 omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL_X2, 1);
505 } else if (rate != cur_rate) { 560 } else if (rate != cur_rate) {
506 valid_rate = omap2_dpll_round_rate(rate); 561 valid_rate = omap2_dpll_round_rate(rate);
507 if (valid_rate != rate) 562 if (valid_rate != rate)
508 goto dpll_exit; 563 goto dpll_exit;
509 564
510 if ((CM_CLKSEL2_PLL & 0x3) == 1) 565 if (mult == 1)
511 low = curr_prcm_set->dpll_speed; 566 low = curr_prcm_set->dpll_speed;
512 else 567 else
513 low = curr_prcm_set->dpll_speed / 2; 568 low = curr_prcm_set->dpll_speed / 2;
514 569
515 tmpset.cm_clksel1_pll = CM_CLKSEL1_PLL; 570 dd = clk->dpll_data;
516 tmpset.cm_clksel1_pll &= ~(0x3FFF << 8); 571 if (!dd)
572 goto dpll_exit;
573
574 tmpset.cm_clksel1_pll = __raw_readl(dd->mult_div1_reg);
575 tmpset.cm_clksel1_pll &= ~(dd->mult_mask |
576 dd->div1_mask);
517 div = ((curr_prcm_set->xtal_speed / 1000000) - 1); 577 div = ((curr_prcm_set->xtal_speed / 1000000) - 1);
518 tmpset.cm_clksel2_pll = CM_CLKSEL2_PLL; 578 tmpset.cm_clksel2_pll = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
519 tmpset.cm_clksel2_pll &= ~0x3; 579 tmpset.cm_clksel2_pll &= ~OMAP24XX_CORE_CLK_SRC_MASK;
520 if (rate > low) { 580 if (rate > low) {
521 tmpset.cm_clksel2_pll |= 0x2; 581 tmpset.cm_clksel2_pll |= CORE_CLK_SRC_DPLL_X2;
522 mult = ((rate / 2) / 1000000); 582 mult = ((rate / 2) / 1000000);
523 done_rate = PRCM_FULL_SPEED; 583 done_rate = CORE_CLK_SRC_DPLL_X2;
524 } else { 584 } else {
525 tmpset.cm_clksel2_pll |= 0x1; 585 tmpset.cm_clksel2_pll |= CORE_CLK_SRC_DPLL;
526 mult = (rate / 1000000); 586 mult = (rate / 1000000);
527 done_rate = PRCM_HALF_SPEED; 587 done_rate = CORE_CLK_SRC_DPLL;
528 } 588 }
529 tmpset.cm_clksel1_pll |= ((div << 8) | (mult << 12)); 589 tmpset.cm_clksel1_pll |= (div << __ffs(dd->mult_mask));
590 tmpset.cm_clksel1_pll |= (mult << __ffs(dd->div1_mask));
530 591
531 /* Worst case */ 592 /* Worst case */
532 tmpset.base_sdrc_rfr = V24XX_SDRC_RFR_CTRL_BYPASS; 593 tmpset.base_sdrc_rfr = SDRC_RFR_CTRL_BYPASS;
533 594
534 if (rate == curr_prcm_set->xtal_speed) /* If asking for 1-1 */ 595 if (rate == curr_prcm_set->xtal_speed) /* If asking for 1-1 */
535 bypass = 1; 596 bypass = 1;
536 597
537 omap2_reprogram_sdrc(PRCM_FULL_SPEED, 1); /* For init_mem */ 598 omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL_X2, 1); /* For init_mem */
538 599
539 /* Force dll lock mode */ 600 /* Force dll lock mode */
540 omap2_set_prcm(tmpset.cm_clksel1_pll, tmpset.base_sdrc_rfr, 601 omap2_set_prcm(tmpset.cm_clksel1_pll, tmpset.base_sdrc_rfr,
@@ -544,7 +605,7 @@ static int omap2_reprogram_dpll(struct clk * clk, unsigned long rate)
544 omap2_init_memory_params(omap2_dll_force_needed()); 605 omap2_init_memory_params(omap2_dll_force_needed());
545 omap2_reprogram_sdrc(done_rate, 0); 606 omap2_reprogram_sdrc(done_rate, 0);
546 } 607 }
547 omap2_clksel_recalc(&dpll_ck); 608 omap2_dpll_recalc(&dpll_ck);
548 ret = 0; 609 ret = 0;
549 610
550dpll_exit: 611dpll_exit:
@@ -552,8 +613,13 @@ dpll_exit:
552 return(ret); 613 return(ret);
553} 614}
554 615
555/* Just return the MPU speed */ 616/**
556static void omap2_mpu_recalc(struct clk * clk) 617 * omap2_table_mpu_recalc - just return the MPU speed
618 * @clk: virt_prcm_set struct clk
619 *
620 * Set virt_prcm_set's rate to the mpu_speed field of the current PRCM set.
621 */
622static void omap2_table_mpu_recalc(struct clk *clk)
557{ 623{
558 clk->rate = curr_prcm_set->mpu_speed; 624 clk->rate = curr_prcm_set->mpu_speed;
559} 625}
@@ -565,9 +631,9 @@ static void omap2_mpu_recalc(struct clk * clk)
565 * Some might argue L3-DDR, others ARM, others IVA. This code is simple and 631 * Some might argue L3-DDR, others ARM, others IVA. This code is simple and
566 * just uses the ARM rates. 632 * just uses the ARM rates.
567 */ 633 */
568static long omap2_round_to_table_rate(struct clk * clk, unsigned long rate) 634static long omap2_round_to_table_rate(struct clk *clk, unsigned long rate)
569{ 635{
570 struct prcm_config * ptr; 636 struct prcm_config *ptr;
571 long highest_rate; 637 long highest_rate;
572 638
573 if (clk != &virt_prcm_set) 639 if (clk != &virt_prcm_set)
@@ -576,6 +642,8 @@ static long omap2_round_to_table_rate(struct clk * clk, unsigned long rate)
576 highest_rate = -EINVAL; 642 highest_rate = -EINVAL;
577 643
578 for (ptr = rate_table; ptr->mpu_speed; ptr++) { 644 for (ptr = rate_table; ptr->mpu_speed; ptr++) {
645 if (!(ptr->flags & cpu_mask))
646 continue;
579 if (ptr->xtal_speed != sys_ck.rate) 647 if (ptr->xtal_speed != sys_ck.rate)
580 continue; 648 continue;
581 649
@@ -588,6 +656,7 @@ static long omap2_round_to_table_rate(struct clk * clk, unsigned long rate)
588 return highest_rate; 656 return highest_rate;
589} 657}
590 658
659#ifdef OLD_CK
591/* 660/*
592 * omap2_convert_field_to_div() - turn field value into integer divider 661 * omap2_convert_field_to_div() - turn field value into integer divider
593 */ 662 */
@@ -938,24 +1007,19 @@ static int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent)
938 set_parent_error: 1007 set_parent_error:
939 return ret; 1008 return ret;
940} 1009}
1010#endif /* OLD_CK */
941 1011
942/* Sets basic clocks based on the specified rate */ 1012/* Sets basic clocks based on the specified rate */
943static int omap2_select_table_rate(struct clk * clk, unsigned long rate) 1013static int omap2_select_table_rate(struct clk *clk, unsigned long rate)
944{ 1014{
945 u32 flags, cur_rate, done_rate, bypass = 0; 1015 u32 cur_rate, done_rate, bypass = 0, tmp;
946 u8 cpu_mask = 0;
947 struct prcm_config *prcm; 1016 struct prcm_config *prcm;
948 unsigned long found_speed = 0; 1017 unsigned long found_speed = 0;
1018 unsigned long flags;
949 1019
950 if (clk != &virt_prcm_set) 1020 if (clk != &virt_prcm_set)
951 return -EINVAL; 1021 return -EINVAL;
952 1022
953 /* FIXME: Change cpu_is_omap2420() to cpu_is_omap242x() */
954 if (cpu_is_omap2420())
955 cpu_mask = RATE_IN_242X;
956 else if (cpu_is_omap2430())
957 cpu_mask = RATE_IN_243X;
958
959 for (prcm = rate_table; prcm->mpu_speed; prcm++) { 1023 for (prcm = rate_table; prcm->mpu_speed; prcm++) {
960 if (!(prcm->flags & cpu_mask)) 1024 if (!(prcm->flags & cpu_mask))
961 continue; 1025 continue;
@@ -976,38 +1040,42 @@ static int omap2_select_table_rate(struct clk * clk, unsigned long rate)
976 } 1040 }
977 1041
978 curr_prcm_set = prcm; 1042 curr_prcm_set = prcm;
979 cur_rate = omap2_get_dpll_rate(&dpll_ck); 1043 cur_rate = omap2_get_dpll_rate_24xx(&dpll_ck);
980 1044
981 if (prcm->dpll_speed == cur_rate / 2) { 1045 if (prcm->dpll_speed == cur_rate / 2) {
982 omap2_reprogram_sdrc(PRCM_HALF_SPEED, 1); 1046 omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL, 1);
983 } else if (prcm->dpll_speed == cur_rate * 2) { 1047 } else if (prcm->dpll_speed == cur_rate * 2) {
984 omap2_reprogram_sdrc(PRCM_FULL_SPEED, 1); 1048 omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL_X2, 1);
985 } else if (prcm->dpll_speed != cur_rate) { 1049 } else if (prcm->dpll_speed != cur_rate) {
986 local_irq_save(flags); 1050 local_irq_save(flags);
987 1051
988 if (prcm->dpll_speed == prcm->xtal_speed) 1052 if (prcm->dpll_speed == prcm->xtal_speed)
989 bypass = 1; 1053 bypass = 1;
990 1054
991 if ((prcm->cm_clksel2_pll & 0x3) == 2) 1055 if ((prcm->cm_clksel2_pll & OMAP24XX_CORE_CLK_SRC_MASK) ==
992 done_rate = PRCM_FULL_SPEED; 1056 CORE_CLK_SRC_DPLL_X2)
1057 done_rate = CORE_CLK_SRC_DPLL_X2;
993 else 1058 else
994 done_rate = PRCM_HALF_SPEED; 1059 done_rate = CORE_CLK_SRC_DPLL;
995 1060
996 /* MPU divider */ 1061 /* MPU divider */
997 CM_CLKSEL_MPU = prcm->cm_clksel_mpu; 1062 cm_write_mod_reg(prcm->cm_clksel_mpu, MPU_MOD, CM_CLKSEL);
998 1063
999 /* dsp + iva1 div(2420), iva2.1(2430) */ 1064 /* dsp + iva1 div(2420), iva2.1(2430) */
1000 CM_CLKSEL_DSP = prcm->cm_clksel_dsp; 1065 cm_write_mod_reg(prcm->cm_clksel_dsp,
1066 OMAP24XX_DSP_MOD, CM_CLKSEL);
1001 1067
1002 CM_CLKSEL_GFX = prcm->cm_clksel_gfx; 1068 cm_write_mod_reg(prcm->cm_clksel_gfx, GFX_MOD, CM_CLKSEL);
1003 1069
1004 /* Major subsystem dividers */ 1070 /* Major subsystem dividers */
1005 CM_CLKSEL1_CORE = prcm->cm_clksel1_core; 1071 tmp = cm_read_mod_reg(CORE_MOD, CM_CLKSEL1) & OMAP24XX_CLKSEL_DSS2_MASK;
1072 cm_write_mod_reg(prcm->cm_clksel1_core | tmp, CORE_MOD, CM_CLKSEL1);
1006 if (cpu_is_omap2430()) 1073 if (cpu_is_omap2430())
1007 CM_CLKSEL_MDM = prcm->cm_clksel_mdm; 1074 cm_write_mod_reg(prcm->cm_clksel_mdm,
1075 OMAP2430_MDM_MOD, CM_CLKSEL);
1008 1076
1009 /* x2 to enter init_mem */ 1077 /* x2 to enter init_mem */
1010 omap2_reprogram_sdrc(PRCM_FULL_SPEED, 1); 1078 omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL_X2, 1);
1011 1079
1012 omap2_set_prcm(prcm->cm_clksel1_pll, prcm->base_sdrc_rfr, 1080 omap2_set_prcm(prcm->cm_clksel1_pll, prcm->base_sdrc_rfr,
1013 bypass); 1081 bypass);
@@ -1017,7 +1085,7 @@ static int omap2_select_table_rate(struct clk * clk, unsigned long rate)
1017 1085
1018 local_irq_restore(flags); 1086 local_irq_restore(flags);
1019 } 1087 }
1020 omap2_clksel_recalc(&dpll_ck); 1088 omap2_dpll_recalc(&dpll_ck);
1021 1089
1022 return 0; 1090 return 0;
1023} 1091}
@@ -1051,27 +1119,45 @@ static struct clk_functions omap2_clk_functions = {
1051 .clk_disable_unused = omap2_clk_disable_unused, 1119 .clk_disable_unused = omap2_clk_disable_unused,
1052}; 1120};
1053 1121
1054static void __init omap2_get_crystal_rate(struct clk *osc, struct clk *sys) 1122static u32 omap2_get_apll_clkin(void)
1055{ 1123{
1056 u32 div, aplls, sclk = 13000000; 1124 u32 aplls, sclk = 0;
1057 1125
1058 aplls = CM_CLKSEL1_PLL; 1126 aplls = cm_read_mod_reg(PLL_MOD, CM_CLKSEL1);
1059 aplls &= ((1 << 23) | (1 << 24) | (1 << 25)); 1127 aplls &= OMAP24XX_APLLS_CLKIN_MASK;
1060 aplls >>= 23; /* Isolate field, 0,2,3 */ 1128 aplls >>= OMAP24XX_APLLS_CLKIN_SHIFT;
1061 1129
1062 if (aplls == 0) 1130 if (aplls == APLLS_CLKIN_19_2MHZ)
1063 sclk = 19200000; 1131 sclk = 19200000;
1064 else if (aplls == 2) 1132 else if (aplls == APLLS_CLKIN_13MHZ)
1065 sclk = 13000000; 1133 sclk = 13000000;
1066 else if (aplls == 3) 1134 else if (aplls == APLLS_CLKIN_12MHZ)
1067 sclk = 12000000; 1135 sclk = 12000000;
1068 1136
1069 div = PRCM_CLKSRC_CTRL; 1137 return sclk;
1070 div &= ((1 << 7) | (1 << 6)); 1138}
1071 div >>= sys->rate_offset; 1139
1140static u32 omap2_get_sysclkdiv(void)
1141{
1142 u32 div;
1143
1144 div = __raw_readl(OMAP24XX_PRCM_CLKSRC_CTRL);
1145 div &= OMAP_SYSCLKDIV_MASK;
1146 div >>= OMAP_SYSCLKDIV_SHIFT;
1072 1147
1073 osc->rate = sclk * div; 1148 return div;
1074 sys->rate = sclk; 1149}
1150
1151static void omap2_osc_clk_recalc(struct clk *clk)
1152{
1153 clk->rate = omap2_get_apll_clkin() * omap2_get_sysclkdiv();
1154 propagate_rate(clk);
1155}
1156
1157static void omap2_sys_clk_recalc(struct clk *clk)
1158{
1159 clk->rate = clk->parent->rate / omap2_get_sysclkdiv();
1160 propagate_rate(clk);
1075} 1161}
1076 1162
1077/* 1163/*
@@ -1100,8 +1186,7 @@ static int __init omap2_clk_arch_init(void)
1100 if (omap2_select_table_rate(&virt_prcm_set, mpurate)) 1186 if (omap2_select_table_rate(&virt_prcm_set, mpurate))
1101 printk(KERN_ERR "Could not find matching MPU rate\n"); 1187 printk(KERN_ERR "Could not find matching MPU rate\n");
1102 1188
1103 propagate_rate(&osc_ck); /* update main root fast */ 1189 recalculate_root_clocks();
1104 propagate_rate(&func_32k_ck); /* update main root slow */
1105 1190
1106 printk(KERN_INFO "Switched to new clocking rate (Crystal/DPLL/MPU): " 1191 printk(KERN_INFO "Switched to new clocking rate (Crystal/DPLL/MPU): "
1107 "%ld.%01ld/%ld/%ld MHz\n", 1192 "%ld.%01ld/%ld/%ld MHz\n",
@@ -1115,13 +1200,21 @@ arch_initcall(omap2_clk_arch_init);
1115int __init omap2_clk_init(void) 1200int __init omap2_clk_init(void)
1116{ 1201{
1117 struct prcm_config *prcm; 1202 struct prcm_config *prcm;
1118 struct clk ** clkp; 1203 struct clk **clkp;
1119 u32 clkrate; 1204 u32 clkrate;
1120 1205
1206 if (cpu_is_omap242x())
1207 cpu_mask = RATE_IN_242X;
1208 else if (cpu_is_omap2430())
1209 cpu_mask = RATE_IN_243X;
1210
1121 clk_init(&omap2_clk_functions); 1211 clk_init(&omap2_clk_functions);
1122 omap2_get_crystal_rate(&osc_ck, &sys_ck);
1123 1212
1124 for (clkp = onchip_clks; clkp < onchip_clks + ARRAY_SIZE(onchip_clks); 1213 omap2_osc_clk_recalc(&osc_ck);
1214 omap2_sys_clk_recalc(&sys_ck);
1215
1216 for (clkp = onchip_24xx_clks;
1217 clkp < onchip_24xx_clks + ARRAY_SIZE(onchip_24xx_clks);
1125 clkp++) { 1218 clkp++) {
1126 1219
1127 if ((*clkp)->flags & CLOCK_IN_OMAP242X && cpu_is_omap2420()) { 1220 if ((*clkp)->flags & CLOCK_IN_OMAP242X && cpu_is_omap2420()) {
@@ -1136,8 +1229,10 @@ int __init omap2_clk_init(void)
1136 } 1229 }
1137 1230
1138 /* Check the MPU rate set by bootloader */ 1231 /* Check the MPU rate set by bootloader */
1139 clkrate = omap2_get_dpll_rate(&dpll_ck); 1232 clkrate = omap2_get_dpll_rate_24xx(&dpll_ck);
1140 for (prcm = rate_table; prcm->mpu_speed; prcm++) { 1233 for (prcm = rate_table; prcm->mpu_speed; prcm++) {
1234 if (!(prcm->flags & cpu_mask))
1235 continue;
1141 if (prcm->xtal_speed != sys_ck.rate) 1236 if (prcm->xtal_speed != sys_ck.rate)
1142 continue; 1237 continue;
1143 if (prcm->dpll_speed <= clkrate) 1238 if (prcm->dpll_speed <= clkrate)
@@ -1145,8 +1240,7 @@ int __init omap2_clk_init(void)
1145 } 1240 }
1146 curr_prcm_set = prcm; 1241 curr_prcm_set = prcm;
1147 1242
1148 propagate_rate(&osc_ck); /* update main root fast */ 1243 recalculate_root_clocks();
1149 propagate_rate(&func_32k_ck); /* update main root slow */
1150 1244
1151 printk(KERN_INFO "Clocking rate (Crystal/DPLL/MPU): " 1245 printk(KERN_INFO "Clocking rate (Crystal/DPLL/MPU): "
1152 "%ld.%01ld/%ld/%ld MHz\n", 1246 "%ld.%01ld/%ld/%ld MHz\n",
@@ -1157,16 +1251,7 @@ int __init omap2_clk_init(void)
1157 * Only enable those clocks we will need, let the drivers 1251 * Only enable those clocks we will need, let the drivers
1158 * enable other clocks as necessary 1252 * enable other clocks as necessary
1159 */ 1253 */
1160 clk_enable(&sync_32k_ick); 1254 clk_enable_init_clocks();
1161 clk_enable(&omapctrl_ick);
1162
1163 /* Force the APLLs always active. The clocks are idled
1164 * automatically by hardware. */
1165 clk_enable(&apll96_ck);
1166 clk_enable(&apll54_ck);
1167
1168 if (cpu_is_omap2430())
1169 clk_enable(&sdrc_ick);
1170 1255
1171 /* Avoid sleeping sleeping during omap2_clk_prepare_for_reboot() */ 1256 /* Avoid sleeping sleeping during omap2_clk_prepare_for_reboot() */
1172 vclk = clk_get(NULL, "virt_prcm_set"); 1257 vclk = clk_get(NULL, "virt_prcm_set");
diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h
index 4f791866b910..9363c207f581 100644
--- a/arch/arm/mach-omap2/clock24xx.h
+++ b/arch/arm/mach-omap2/clock24xx.h
@@ -14,24 +14,29 @@
14 * published by the Free Software Foundation. 14 * published by the Free Software Foundation.
15 */ 15 */
16 16
17#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK_H 17#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK24XX_H
18#define __ARCH_ARM_MACH_OMAP2_CLOCK_H 18#define __ARCH_ARM_MACH_OMAP2_CLOCK24XX_H
19 19
20static void omap2_sys_clk_recalc(struct clk * clk); 20#include "clock.h"
21static void omap2_clksel_recalc(struct clk * clk); 21
22static void omap2_followparent_recalc(struct clk * clk); 22#include "prm.h"
23static void omap2_propagate_rate(struct clk * clk); 23#include "cm.h"
24static void omap2_mpu_recalc(struct clk * clk); 24#include "prm-regbits-24xx.h"
25#include "cm-regbits-24xx.h"
26#include "sdrc.h"
27
28static void omap2_table_mpu_recalc(struct clk * clk);
25static int omap2_select_table_rate(struct clk * clk, unsigned long rate); 29static int omap2_select_table_rate(struct clk * clk, unsigned long rate);
26static long omap2_round_to_table_rate(struct clk * clk, unsigned long rate); 30static long omap2_round_to_table_rate(struct clk * clk, unsigned long rate);
27static void omap2_clk_disable(struct clk *clk);
28static void omap2_sys_clk_recalc(struct clk * clk); 31static void omap2_sys_clk_recalc(struct clk * clk);
29static u32 omap2_clksel_to_divisor(u32 div_sel, u32 field_val); 32static void omap2_osc_clk_recalc(struct clk * clk);
30static u32 omap2_clksel_get_divisor(struct clk *clk); 33static void omap2_sys_clk_recalc(struct clk * clk);
31 34static void omap2_dpll_recalc(struct clk * clk);
32 35static int omap2_clk_fixed_enable(struct clk * clk);
33#define RATE_IN_242X (1 << 0) 36static void omap2_clk_fixed_disable(struct clk * clk);
34#define RATE_IN_243X (1 << 1) 37static int omap2_enable_osc_ck(struct clk * clk);
38static void omap2_disable_osc_ck(struct clk * clk);
39static int omap2_reprogram_dpll(struct clk * clk, unsigned long rate);
35 40
36/* Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated. 41/* Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
37 * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,CM_CLKSEL_DSP 42 * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,CM_CLKSEL_DSP
@@ -52,16 +57,6 @@ struct prcm_config {
52 unsigned char flags; 57 unsigned char flags;
53}; 58};
54 59
55/* Mask for clksel which support parent settign in set_rate */
56#define SRC_SEL_MASK (CM_CORE_SEL1 | CM_CORE_SEL2 | CM_WKUP_SEL1 | \
57 CM_PLL_SEL1 | CM_PLL_SEL2 | CM_SYSCLKOUT_SEL1)
58
59/* Mask for clksel regs which support rate operations */
60#define SRC_RATE_SEL_MASK (CM_MPU_SEL1 | CM_DSP_SEL1 | CM_GFX_SEL1 | \
61 CM_MODEM_SEL1 | CM_CORE_SEL1 | CM_CORE_SEL2 | \
62 CM_WKUP_SEL1 | CM_PLL_SEL1 | CM_PLL_SEL2 | \
63 CM_SYSCLKOUT_SEL1)
64
65/* 60/*
66 * The OMAP2 processor can be run at several discrete 'PRCM configurations'. 61 * The OMAP2 processor can be run at several discrete 'PRCM configurations'.
67 * These configurations are characterized by voltage and speed for clocks. 62 * These configurations are characterized by voltage and speed for clocks.
@@ -174,7 +169,7 @@ struct prcm_config {
174#define RII_CLKSEL_DSP (3 << 0) /* c5x - 200MHz */ 169#define RII_CLKSEL_DSP (3 << 0) /* c5x - 200MHz */
175#define RII_CLKSEL_DSP_IF (2 << 5) /* c5x - 100MHz */ 170#define RII_CLKSEL_DSP_IF (2 << 5) /* c5x - 100MHz */
176#define RII_SYNC_DSP (0 << 7) /* Bypass sync */ 171#define RII_SYNC_DSP (0 << 7) /* Bypass sync */
177#define RII_CLKSEL_IVA (6 << 8) /* iva1 - 200MHz */ 172#define RII_CLKSEL_IVA (3 << 8) /* iva1 - 200MHz */
178#define RII_SYNC_IVA (0 << 13) /* Bypass sync */ 173#define RII_SYNC_IVA (0 << 13) /* Bypass sync */
179#define RII_CM_CLKSEL_DSP_VAL RII_SYNC_IVA | RII_CLKSEL_IVA | \ 174#define RII_CM_CLKSEL_DSP_VAL RII_SYNC_IVA | RII_CLKSEL_IVA | \
180 RII_SYNC_DSP | RII_CLKSEL_DSP_IF | \ 175 RII_SYNC_DSP | RII_CLKSEL_DSP_IF | \
@@ -182,6 +177,27 @@ struct prcm_config {
182#define RII_CLKSEL_GFX (2 << 0) /* 50MHz */ 177#define RII_CLKSEL_GFX (2 << 0) /* 50MHz */
183#define RII_CM_CLKSEL_GFX_VAL RII_CLKSEL_GFX 178#define RII_CM_CLKSEL_GFX_VAL RII_CLKSEL_GFX
184 179
180/* 2420-PRCM I 660MHz core */
181#define RI_CLKSEL_L3 (4 << 0) /* 165MHz */
182#define RI_CLKSEL_L4 (2 << 5) /* 82.5MHz */
183#define RI_CLKSEL_USB (4 << 25) /* 41.25MHz */
184#define RI_CM_CLKSEL1_CORE_VAL RI_CLKSEL_USB | \
185 RXX_CLKSEL_SSI | RXX_CLKSEL_VLYNQ | \
186 RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
187 RI_CLKSEL_L4 | RI_CLKSEL_L3
188#define RI_CLKSEL_MPU (2 << 0) /* 330MHz */
189#define RI_CM_CLKSEL_MPU_VAL RI_CLKSEL_MPU
190#define RI_CLKSEL_DSP (3 << 0) /* c5x - 220MHz */
191#define RI_CLKSEL_DSP_IF (2 << 5) /* c5x - 110MHz */
192#define RI_SYNC_DSP (1 << 7) /* Activate sync */
193#define RI_CLKSEL_IVA (4 << 8) /* iva1 - 165MHz */
194#define RI_SYNC_IVA (0 << 13) /* Bypass sync */
195#define RI_CM_CLKSEL_DSP_VAL RI_SYNC_IVA | RI_CLKSEL_IVA | \
196 RI_SYNC_DSP | RI_CLKSEL_DSP_IF | \
197 RI_CLKSEL_DSP
198#define RI_CLKSEL_GFX (1 << 0) /* 165MHz */
199#define RI_CM_CLKSEL_GFX_VAL RI_CLKSEL_GFX
200
185/* 2420-PRCM VII (boot) */ 201/* 2420-PRCM VII (boot) */
186#define RVII_CLKSEL_L3 (1 << 0) 202#define RVII_CLKSEL_L3 (1 << 0)
187#define RVII_CLKSEL_L4 (1 << 5) 203#define RVII_CLKSEL_L4 (1 << 5)
@@ -224,7 +240,6 @@ struct prcm_config {
224 240
225/* 241/*
226 * 2430 - standalone, 2*ref*M/(n+1), M/N is for exactness not relock speed 242 * 2430 - standalone, 2*ref*M/(n+1), M/N is for exactness not relock speed
227 * #2 (ratio1) baseport-target
228 * #5a (ratio1) baseport-target, target DPLL = 266*2 = 532MHz 243 * #5a (ratio1) baseport-target, target DPLL = 266*2 = 532MHz
229 */ 244 */
230#define M5A_DPLL_MULT_12 (133 << 12) 245#define M5A_DPLL_MULT_12 (133 << 12)
@@ -232,13 +247,13 @@ struct prcm_config {
232#define M5A_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ 247#define M5A_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \
233 M5A_DPLL_DIV_12 | M5A_DPLL_MULT_12 | \ 248 M5A_DPLL_DIV_12 | M5A_DPLL_MULT_12 | \
234 MX_APLLS_CLIKIN_12 249 MX_APLLS_CLIKIN_12
235#define M5A_DPLL_MULT_13 (266 << 12) 250#define M5A_DPLL_MULT_13 (61 << 12)
236#define M5A_DPLL_DIV_13 (12 << 8) 251#define M5A_DPLL_DIV_13 (2 << 8)
237#define M5A_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \ 252#define M5A_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \
238 M5A_DPLL_DIV_13 | M5A_DPLL_MULT_13 | \ 253 M5A_DPLL_DIV_13 | M5A_DPLL_MULT_13 | \
239 MX_APLLS_CLIKIN_13 254 MX_APLLS_CLIKIN_13
240#define M5A_DPLL_MULT_19 (180 << 12) 255#define M5A_DPLL_MULT_19 (55 << 12)
241#define M5A_DPLL_DIV_19 (12 << 8) 256#define M5A_DPLL_DIV_19 (3 << 8)
242#define M5A_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \ 257#define M5A_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \
243 M5A_DPLL_DIV_19 | M5A_DPLL_MULT_19 | \ 258 M5A_DPLL_DIV_19 | M5A_DPLL_MULT_19 | \
244 MX_APLLS_CLIKIN_19_2 259 MX_APLLS_CLIKIN_19_2
@@ -260,7 +275,27 @@ struct prcm_config {
260 M5B_DPLL_DIV_19 | M5B_DPLL_MULT_19 | \ 275 M5B_DPLL_DIV_19 | M5B_DPLL_MULT_19 | \
261 MX_APLLS_CLIKIN_19_2 276 MX_APLLS_CLIKIN_19_2
262/* 277/*
263 * #4 (ratio2) 278 * #4 (ratio2), DPLL = 399*2 = 798MHz, L3=133MHz
279 */
280#define M4_DPLL_MULT_12 (133 << 12)
281#define M4_DPLL_DIV_12 (3 << 8)
282#define M4_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \
283 M4_DPLL_DIV_12 | M4_DPLL_MULT_12 | \
284 MX_APLLS_CLIKIN_12
285
286#define M4_DPLL_MULT_13 (399 << 12)
287#define M4_DPLL_DIV_13 (12 << 8)
288#define M4_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \
289 M4_DPLL_DIV_13 | M4_DPLL_MULT_13 | \
290 MX_APLLS_CLIKIN_13
291
292#define M4_DPLL_MULT_19 (145 << 12)
293#define M4_DPLL_DIV_19 (6 << 8)
294#define M4_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \
295 M4_DPLL_DIV_19 | M4_DPLL_MULT_19 | \
296 MX_APLLS_CLIKIN_19_2
297
298/*
264 * #3 (ratio2) baseport-target, target DPLL = 330*2 = 660MHz 299 * #3 (ratio2) baseport-target, target DPLL = 330*2 = 660MHz
265 */ 300 */
266#define M3_DPLL_MULT_12 (55 << 12) 301#define M3_DPLL_MULT_12 (55 << 12)
@@ -268,16 +303,41 @@ struct prcm_config {
268#define M3_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ 303#define M3_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \
269 M3_DPLL_DIV_12 | M3_DPLL_MULT_12 | \ 304 M3_DPLL_DIV_12 | M3_DPLL_MULT_12 | \
270 MX_APLLS_CLIKIN_12 305 MX_APLLS_CLIKIN_12
271#define M3_DPLL_MULT_13 (330 << 12) 306#define M3_DPLL_MULT_13 (76 << 12)
272#define M3_DPLL_DIV_13 (12 << 8) 307#define M3_DPLL_DIV_13 (2 << 8)
273#define M3_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \ 308#define M3_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \
274 M3_DPLL_DIV_13 | M3_DPLL_MULT_13 | \ 309 M3_DPLL_DIV_13 | M3_DPLL_MULT_13 | \
275 MX_APLLS_CLIKIN_13 310 MX_APLLS_CLIKIN_13
276#define M3_DPLL_MULT_19 (275 << 12) 311#define M3_DPLL_MULT_19 (17 << 12)
277#define M3_DPLL_DIV_19 (15 << 8) 312#define M3_DPLL_DIV_19 (0 << 8)
278#define M3_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \ 313#define M3_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \
279 M3_DPLL_DIV_19 | M3_DPLL_MULT_19 | \ 314 M3_DPLL_DIV_19 | M3_DPLL_MULT_19 | \
280 MX_APLLS_CLIKIN_19_2 315 MX_APLLS_CLIKIN_19_2
316
317/*
318 * #2 (ratio1) DPLL = 330*2 = 660MHz, L3=165MHz
319 */
320#define M2_DPLL_MULT_12 (55 << 12)
321#define M2_DPLL_DIV_12 (1 << 8)
322#define M2_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \
323 M2_DPLL_DIV_12 | M2_DPLL_MULT_12 | \
324 MX_APLLS_CLIKIN_12
325
326/* Speed changes - Used 658.7MHz instead of 660MHz for LP-Refresh M=76 N=2,
327 * relock time issue */
328/* Core frequency changed from 330/165 to 329/164 MHz*/
329#define M2_DPLL_MULT_13 (76 << 12)
330#define M2_DPLL_DIV_13 (2 << 8)
331#define M2_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \
332 M2_DPLL_DIV_13 | M2_DPLL_MULT_13 | \
333 MX_APLLS_CLIKIN_13
334
335#define M2_DPLL_MULT_19 (17 << 12)
336#define M2_DPLL_DIV_19 (0 << 8)
337#define M2_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \
338 M2_DPLL_DIV_19 | M2_DPLL_MULT_19 | \
339 MX_APLLS_CLIKIN_19_2
340
281/* boot (boot) */ 341/* boot (boot) */
282#define MB_DPLL_MULT (1 << 12) 342#define MB_DPLL_MULT (1 << 12)
283#define MB_DPLL_DIV (0 << 8) 343#define MB_DPLL_DIV (0 << 8)
@@ -300,6 +360,13 @@ struct prcm_config {
300 * boot (boot) 360 * boot (boot)
301 */ 361 */
302 362
363/* PRCM I target DPLL = 2*330MHz = 660MHz */
364#define MI_DPLL_MULT_12 (55 << 12)
365#define MI_DPLL_DIV_12 (1 << 8)
366#define MI_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \
367 MI_DPLL_DIV_12 | MI_DPLL_MULT_12 | \
368 MX_APLLS_CLIKIN_12
369
303/* 370/*
304 * 2420 Equivalent - mode registers 371 * 2420 Equivalent - mode registers
305 * PRCM II , target DPLL = 2*300MHz = 600MHz 372 * PRCM II , target DPLL = 2*300MHz = 600MHz
@@ -335,28 +402,6 @@ struct prcm_config {
335#define MX_CLKSEL2_PLL_2x_VAL (2 << 0) 402#define MX_CLKSEL2_PLL_2x_VAL (2 << 0)
336#define MX_CLKSEL2_PLL_1x_VAL (1 << 0) 403#define MX_CLKSEL2_PLL_1x_VAL (1 << 0)
337 404
338/*
339 * These represent optimal values for common parts, it won't work for all.
340 * As long as you scale down, most parameters are still work, they just
341 * become sub-optimal. The RFR value goes in the opposite direction. If you
342 * don't adjust it down as your clock period increases the refresh interval
343 * will not be met. Setting all parameters for complete worst case may work,
344 * but may cut memory performance by 2x. Due to errata the DLLs need to be
345 * unlocked and their value needs run time calibration. A dynamic call is
346 * need for that as no single right value exists acorss production samples.
347 *
348 * Only the FULL speed values are given. Current code is such that rate
349 * changes must be made at DPLLoutx2. The actual value adjustment for low
350 * frequency operation will be handled by omap_set_performance()
351 *
352 * By having the boot loader boot up in the fastest L4 speed available likely
353 * will result in something which you can switch between.
354 */
355#define V24XX_SDRC_RFR_CTRL_133MHz (0x0003de00 | 1)
356#define V24XX_SDRC_RFR_CTRL_100MHz (0x0002da01 | 1)
357#define V24XX_SDRC_RFR_CTRL_110MHz (0x0002da01 | 1) /* Need to calc */
358#define V24XX_SDRC_RFR_CTRL_BYPASS (0x00005000 | 1) /* Need to calc */
359
360/* MPU speed defines */ 405/* MPU speed defines */
361#define S12M 12000000 406#define S12M 12000000
362#define S13M 13000000 407#define S13M 13000000
@@ -365,15 +410,21 @@ struct prcm_config {
365#define S100M 100000000 410#define S100M 100000000
366#define S133M 133000000 411#define S133M 133000000
367#define S150M 150000000 412#define S150M 150000000
413#define S164M 164000000
368#define S165M 165000000 414#define S165M 165000000
415#define S199M 199000000
369#define S200M 200000000 416#define S200M 200000000
370#define S266M 266000000 417#define S266M 266000000
371#define S300M 300000000 418#define S300M 300000000
419#define S329M 329000000
372#define S330M 330000000 420#define S330M 330000000
421#define S399M 399000000
373#define S400M 400000000 422#define S400M 400000000
374#define S532M 532000000 423#define S532M 532000000
375#define S600M 600000000 424#define S600M 600000000
425#define S658M 658000000
376#define S660M 660000000 426#define S660M 660000000
427#define S798M 798000000
377 428
378/*------------------------------------------------------------------------- 429/*-------------------------------------------------------------------------
379 * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated. 430 * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
@@ -394,78 +445,93 @@ struct prcm_config {
394 * Note: This table needs to be sorted, fastest to slowest. 445 * Note: This table needs to be sorted, fastest to slowest.
395 *-------------------------------------------------------------------------*/ 446 *-------------------------------------------------------------------------*/
396static struct prcm_config rate_table[] = { 447static struct prcm_config rate_table[] = {
448 /* PRCM I - FAST */
449 {S12M, S660M, S330M, RI_CM_CLKSEL_MPU_VAL, /* 330MHz ARM */
450 RI_CM_CLKSEL_DSP_VAL, RI_CM_CLKSEL_GFX_VAL,
451 RI_CM_CLKSEL1_CORE_VAL, MI_CM_CLKSEL1_PLL_12_VAL,
452 MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_165MHz,
453 RATE_IN_242X},
454
397 /* PRCM II - FAST */ 455 /* PRCM II - FAST */
398 {S12M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL, /* 300MHz ARM */ 456 {S12M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL, /* 300MHz ARM */
399 RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, 457 RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
400 RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL, 458 RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL,
401 MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_100MHz, 459 MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
402 RATE_IN_242X}, 460 RATE_IN_242X},
403 461
404 {S13M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL, /* 300MHz ARM */ 462 {S13M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL, /* 300MHz ARM */
405 RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, 463 RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
406 RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL, 464 RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL,
407 MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_100MHz, 465 MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
408 RATE_IN_242X}, 466 RATE_IN_242X},
409 467
410 /* PRCM III - FAST */ 468 /* PRCM III - FAST */
411 {S12M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */ 469 {S12M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */
412 RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, 470 RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
413 RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL, 471 RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL,
414 MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_133MHz, 472 MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
415 RATE_IN_242X}, 473 RATE_IN_242X},
416 474
417 {S13M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */ 475 {S13M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */
418 RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, 476 RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
419 RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL, 477 RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL,
420 MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_133MHz, 478 MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
421 RATE_IN_242X}, 479 RATE_IN_242X},
422 480
423 /* PRCM II - SLOW */ 481 /* PRCM II - SLOW */
424 {S12M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL, /* 150MHz ARM */ 482 {S12M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL, /* 150MHz ARM */
425 RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, 483 RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
426 RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL, 484 RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL,
427 MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_100MHz, 485 MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
428 RATE_IN_242X}, 486 RATE_IN_242X},
429 487
430 {S13M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL, /* 150MHz ARM */ 488 {S13M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL, /* 150MHz ARM */
431 RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, 489 RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
432 RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL, 490 RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL,
433 MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_100MHz, 491 MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
434 RATE_IN_242X}, 492 RATE_IN_242X},
435 493
436 /* PRCM III - SLOW */ 494 /* PRCM III - SLOW */
437 {S12M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */ 495 {S12M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */
438 RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, 496 RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
439 RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL, 497 RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL,
440 MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_133MHz, 498 MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
441 RATE_IN_242X}, 499 RATE_IN_242X},
442 500
443 {S13M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */ 501 {S13M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */
444 RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, 502 RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
445 RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL, 503 RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL,
446 MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_133MHz, 504 MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
447 RATE_IN_242X}, 505 RATE_IN_242X},
448 506
449 /* PRCM-VII (boot-bypass) */ 507 /* PRCM-VII (boot-bypass) */
450 {S12M, S12M, S12M, RVII_CM_CLKSEL_MPU_VAL, /* 12MHz ARM*/ 508 {S12M, S12M, S12M, RVII_CM_CLKSEL_MPU_VAL, /* 12MHz ARM*/
451 RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL, 509 RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL,
452 RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_12_VAL, 510 RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_12_VAL,
453 MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_BYPASS, 511 MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_BYPASS,
454 RATE_IN_242X}, 512 RATE_IN_242X},
455 513
456 /* PRCM-VII (boot-bypass) */ 514 /* PRCM-VII (boot-bypass) */
457 {S13M, S13M, S13M, RVII_CM_CLKSEL_MPU_VAL, /* 13MHz ARM */ 515 {S13M, S13M, S13M, RVII_CM_CLKSEL_MPU_VAL, /* 13MHz ARM */
458 RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL, 516 RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL,
459 RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_13_VAL, 517 RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_13_VAL,
460 MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_BYPASS, 518 MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_BYPASS,
461 RATE_IN_242X}, 519 RATE_IN_242X},
462 520
463 /* PRCM #3 - ratio2 (ES2) - FAST */ 521 /* PRCM #4 - ratio2 (ES2.1) - FAST */
464 {S13M, S660M, S330M, R2_CM_CLKSEL_MPU_VAL, /* 330MHz ARM */ 522 {S13M, S798M, S399M, R2_CM_CLKSEL_MPU_VAL, /* 399MHz ARM */
465 R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL, 523 R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL,
466 R2_CM_CLKSEL1_CORE_VAL, M3_CM_CLKSEL1_PLL_13_VAL, 524 R2_CM_CLKSEL1_CORE_VAL, M4_CM_CLKSEL1_PLL_13_VAL,
467 MX_CLKSEL2_PLL_2x_VAL, R2_CM_CLKSEL_MDM_VAL, 525 MX_CLKSEL2_PLL_2x_VAL, R2_CM_CLKSEL_MDM_VAL,
468 V24XX_SDRC_RFR_CTRL_110MHz, 526 SDRC_RFR_CTRL_133MHz,
527 RATE_IN_243X},
528
529 /* PRCM #2 - ratio1 (ES2) - FAST */
530 {S13M, S658M, S329M, R1_CM_CLKSEL_MPU_VAL, /* 330MHz ARM */
531 R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
532 R1_CM_CLKSEL1_CORE_VAL, M2_CM_CLKSEL1_PLL_13_VAL,
533 MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
534 SDRC_RFR_CTRL_165MHz,
469 RATE_IN_243X}, 535 RATE_IN_243X},
470 536
471 /* PRCM #5a - ratio1 - FAST */ 537 /* PRCM #5a - ratio1 - FAST */
@@ -473,7 +539,7 @@ static struct prcm_config rate_table[] = {
473 R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, 539 R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
474 R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL, 540 R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL,
475 MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL, 541 MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
476 V24XX_SDRC_RFR_CTRL_133MHz, 542 SDRC_RFR_CTRL_133MHz,
477 RATE_IN_243X}, 543 RATE_IN_243X},
478 544
479 /* PRCM #5b - ratio1 - FAST */ 545 /* PRCM #5b - ratio1 - FAST */
@@ -481,15 +547,23 @@ static struct prcm_config rate_table[] = {
481 R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, 547 R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
482 R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL, 548 R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL,
483 MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL, 549 MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
484 V24XX_SDRC_RFR_CTRL_100MHz, 550 SDRC_RFR_CTRL_100MHz,
485 RATE_IN_243X}, 551 RATE_IN_243X},
486 552
487 /* PRCM #3 - ratio2 (ES2) - SLOW */ 553 /* PRCM #4 - ratio1 (ES2.1) - SLOW */
488 {S13M, S330M, S165M, R2_CM_CLKSEL_MPU_VAL, /* 165MHz ARM */ 554 {S13M, S399M, S199M, R2_CM_CLKSEL_MPU_VAL, /* 200MHz ARM */
489 R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL, 555 R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL,
490 R2_CM_CLKSEL1_CORE_VAL, M3_CM_CLKSEL1_PLL_13_VAL, 556 R2_CM_CLKSEL1_CORE_VAL, M4_CM_CLKSEL1_PLL_13_VAL,
491 MX_CLKSEL2_PLL_1x_VAL, R2_CM_CLKSEL_MDM_VAL, 557 MX_CLKSEL2_PLL_1x_VAL, R2_CM_CLKSEL_MDM_VAL,
492 V24XX_SDRC_RFR_CTRL_110MHz, 558 SDRC_RFR_CTRL_133MHz,
559 RATE_IN_243X},
560
561 /* PRCM #2 - ratio1 (ES2) - SLOW */
562 {S13M, S329M, S164M, R1_CM_CLKSEL_MPU_VAL, /* 165MHz ARM */
563 R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
564 R1_CM_CLKSEL1_CORE_VAL, M2_CM_CLKSEL1_PLL_13_VAL,
565 MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
566 SDRC_RFR_CTRL_165MHz,
493 RATE_IN_243X}, 567 RATE_IN_243X},
494 568
495 /* PRCM #5a - ratio1 - SLOW */ 569 /* PRCM #5a - ratio1 - SLOW */
@@ -497,7 +571,7 @@ static struct prcm_config rate_table[] = {
497 R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, 571 R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
498 R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL, 572 R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL,
499 MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL, 573 MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
500 V24XX_SDRC_RFR_CTRL_133MHz, 574 SDRC_RFR_CTRL_133MHz,
501 RATE_IN_243X}, 575 RATE_IN_243X},
502 576
503 /* PRCM #5b - ratio1 - SLOW*/ 577 /* PRCM #5b - ratio1 - SLOW*/
@@ -505,7 +579,7 @@ static struct prcm_config rate_table[] = {
505 R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, 579 R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
506 R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL, 580 R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL,
507 MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL, 581 MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
508 V24XX_SDRC_RFR_CTRL_100MHz, 582 SDRC_RFR_CTRL_100MHz,
509 RATE_IN_243X}, 583 RATE_IN_243X},
510 584
511 /* PRCM-boot/bypass */ 585 /* PRCM-boot/bypass */
@@ -513,7 +587,7 @@ static struct prcm_config rate_table[] = {
513 RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL, 587 RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL,
514 RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_13_VAL, 588 RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_13_VAL,
515 MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL, 589 MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL,
516 V24XX_SDRC_RFR_CTRL_BYPASS, 590 SDRC_RFR_CTRL_BYPASS,
517 RATE_IN_243X}, 591 RATE_IN_243X},
518 592
519 /* PRCM-boot/bypass */ 593 /* PRCM-boot/bypass */
@@ -521,7 +595,7 @@ static struct prcm_config rate_table[] = {
521 RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL, 595 RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL,
522 RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_12_VAL, 596 RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_12_VAL,
523 MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL, 597 MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL,
524 V24XX_SDRC_RFR_CTRL_BYPASS, 598 SDRC_RFR_CTRL_BYPASS,
525 RATE_IN_243X}, 599 RATE_IN_243X},
526 600
527 { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, 601 { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
@@ -547,6 +621,7 @@ static struct prcm_config rate_table[] = {
547 * clocks. 621 * clocks.
548 *-------------------------------------------------------------------------*/ 622 *-------------------------------------------------------------------------*/
549 623
624#ifdef OLD_CK
550/* Base external input clocks */ 625/* Base external input clocks */
551static struct clk func_32k_ck = { 626static struct clk func_32k_ck = {
552 .name = "func_32k_ck", 627 .name = "func_32k_ck",
@@ -554,7 +629,7 @@ static struct clk func_32k_ck = {
554 .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | 629 .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
555 RATE_FIXED | ALWAYS_ENABLED, 630 RATE_FIXED | ALWAYS_ENABLED,
556}; 631};
557 632#endif /* OLD_CK */
558/* Typical 12/13MHz in standalone mode, will be 26Mhz in chassis mode */ 633/* Typical 12/13MHz in standalone mode, will be 26Mhz in chassis mode */
559static struct clk osc_ck = { /* (*12, *13, 19.2, *26, 38.4)MHz */ 634static struct clk osc_ck = { /* (*12, *13, 19.2, *26, 38.4)MHz */
560 .name = "osc_ck", 635 .name = "osc_ck",
@@ -570,10 +645,9 @@ static struct clk sys_ck = { /* (*12, *13, 19.2, 26, 38.4)MHz */
570 .rate = 13000000, 645 .rate = 13000000,
571 .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | 646 .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
572 RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES, 647 RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES,
573 .rate_offset = 6, /* sysclkdiv 1 or 2, already handled or no boot */
574 .recalc = &omap2_sys_clk_recalc, 648 .recalc = &omap2_sys_clk_recalc,
575}; 649};
576 650#ifdef OLD_CK
577static struct clk alt_ck = { /* Typical 54M or 48M, may not exist */ 651static struct clk alt_ck = { /* Typical 54M or 48M, may not exist */
578 .name = "alt_ck", 652 .name = "alt_ck",
579 .rate = 54000000, 653 .rate = 54000000,
@@ -581,29 +655,43 @@ static struct clk alt_ck = { /* Typical 54M or 48M, may not exist */
581 RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES, 655 RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES,
582 .recalc = &omap2_propagate_rate, 656 .recalc = &omap2_propagate_rate,
583}; 657};
584 658#endif /* OLD_CK */
585/* 659/*
586 * Analog domain root source clocks 660 * Analog domain root source clocks
587 */ 661 */
588 662
589/* dpll_ck, is broken out in to special cases through clksel */ 663/* dpll_ck, is broken out in to special cases through clksel */
664/* REVISIT: Rate changes on dpll_ck trigger a full set change. ...
665 * deal with this
666 */
667
668static const struct dpll_data dpll_dd = {
669 .mult_div1_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
670 .mult_mask = OMAP24XX_DPLL_MULT_MASK,
671 .div1_mask = OMAP24XX_DPLL_DIV_MASK,
672};
673
590static struct clk dpll_ck = { 674static struct clk dpll_ck = {
591 .name = "dpll_ck", 675 .name = "dpll_ck",
592 .parent = &sys_ck, /* Can be func_32k also */ 676 .parent = &sys_ck, /* Can be func_32k also */
677 .dpll_data = &dpll_dd,
593 .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | 678 .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
594 RATE_PROPAGATES | RATE_CKCTL | CM_PLL_SEL1, 679 RATE_PROPAGATES | ALWAYS_ENABLED,
595 .recalc = &omap2_clksel_recalc, 680 .recalc = &omap2_dpll_recalc,
681 .set_rate = &omap2_reprogram_dpll,
596}; 682};
597 683
598static struct clk apll96_ck = { 684static struct clk apll96_ck = {
599 .name = "apll96_ck", 685 .name = "apll96_ck",
600 .parent = &sys_ck, 686 .parent = &sys_ck,
601 .rate = 96000000, 687 .rate = 96000000,
602 .flags = CLOCK_IN_OMAP242X |CLOCK_IN_OMAP243X | 688 .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
603 RATE_FIXED | RATE_PROPAGATES, 689 RATE_FIXED | RATE_PROPAGATES | ENABLE_ON_INIT,
604 .enable_reg = (void __iomem *)&CM_CLKEN_PLL, 690 .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
605 .enable_bit = 0x2, 691 .enable_bit = OMAP24XX_EN_96M_PLL_SHIFT,
606 .recalc = &omap2_propagate_rate, 692 .enable = &omap2_clk_fixed_enable,
693 .disable = &omap2_clk_fixed_disable,
694 .recalc = &propagate_rate,
607}; 695};
608 696
609static struct clk apll54_ck = { 697static struct clk apll54_ck = {
@@ -611,15 +699,18 @@ static struct clk apll54_ck = {
611 .parent = &sys_ck, 699 .parent = &sys_ck,
612 .rate = 54000000, 700 .rate = 54000000,
613 .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | 701 .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
614 RATE_FIXED | RATE_PROPAGATES, 702 RATE_FIXED | RATE_PROPAGATES | ENABLE_ON_INIT,
615 .enable_reg = (void __iomem *)&CM_CLKEN_PLL, 703 .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
616 .enable_bit = 0x6, 704 .enable_bit = OMAP24XX_EN_54M_PLL_SHIFT,
617 .recalc = &omap2_propagate_rate, 705 .enable = &omap2_clk_fixed_enable,
706 .disable = &omap2_clk_fixed_disable,
707 .recalc = &propagate_rate,
618}; 708};
619 709
620/* 710/*
621 * PRCM digital base sources 711 * PRCM digital base sources
622 */ 712 */
713#ifdef OLD_CK
623static struct clk func_54m_ck = { 714static struct clk func_54m_ck = {
624 .name = "func_54m_ck", 715 .name = "func_54m_ck",
625 .parent = &apll54_ck, /* can also be alt_clk */ 716 .parent = &apll54_ck, /* can also be alt_clk */
@@ -631,15 +722,15 @@ static struct clk func_54m_ck = {
631 .enable_bit = 0xff, 722 .enable_bit = 0xff,
632 .recalc = &omap2_propagate_rate, 723 .recalc = &omap2_propagate_rate,
633}; 724};
634 725#endif /* OLD_CK */
635static struct clk core_ck = { 726static struct clk core_ck = {
636 .name = "core_ck", 727 .name = "core_ck",
637 .parent = &dpll_ck, /* can also be 32k */ 728 .parent = &dpll_ck, /* can also be 32k */
638 .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | 729 .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
639 ALWAYS_ENABLED | RATE_PROPAGATES, 730 ALWAYS_ENABLED | RATE_PROPAGATES,
640 .recalc = &omap2_propagate_rate, 731 .recalc = &followparent_recalc,
641}; 732};
642 733#ifdef OLD_CK
643static struct clk sleep_ck = { /* sys_clk or 32k */ 734static struct clk sleep_ck = { /* sys_clk or 32k */
644 .name = "sleep_ck", 735 .name = "sleep_ck",
645 .parent = &func_32k_ck, 736 .parent = &func_32k_ck,
@@ -726,7 +817,7 @@ static struct clk emul_ck = {
726 .recalc = &omap2_propagate_rate, 817 .recalc = &omap2_propagate_rate,
727 818
728}; 819};
729 820#endif /* OLD_CK */
730/* 821/*
731 * MPU clock domain 822 * MPU clock domain
732 * Clocks: 823 * Clocks:
@@ -740,13 +831,17 @@ static struct clk emul_ck = {
740static struct clk mpu_ck = { /* Control cpu */ 831static struct clk mpu_ck = { /* Control cpu */
741 .name = "mpu_ck", 832 .name = "mpu_ck",
742 .parent = &core_ck, 833 .parent = &core_ck,
743 .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | RATE_CKCTL | 834 .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
744 ALWAYS_ENABLED | CM_MPU_SEL1 | DELAYED_APP | 835 ALWAYS_ENABLED | DELAYED_APP |
745 CONFIG_PARTICIPANT | RATE_PROPAGATES, 836 CONFIG_PARTICIPANT | RATE_PROPAGATES,
746 .rate_offset = 0, /* bits 0-4 */ 837 .init = &omap2_init_clksel_parent,
838 .clksel_reg = OMAP_CM_REGADDR(MPU_MOD, CM_CLKSEL),
839 .clksel_mask = OMAP24XX_CLKSEL_MPU_MASK,
747 .recalc = &omap2_clksel_recalc, 840 .recalc = &omap2_clksel_recalc,
841 .round_rate = &omap2_clksel_round_rate,
842 .set_rate = &omap2_clksel_set_rate
748}; 843};
749 844#ifdef OLD_CK
750/* 845/*
751 * DSP (2430-IVA2.1) (2420-UMA+IVA1) clock domain 846 * DSP (2430-IVA2.1) (2420-UMA+IVA1) clock domain
752 * Clocks: 847 * Clocks:
@@ -1933,7 +2028,7 @@ static struct clk mmchsdb2_fck = {
1933 .enable_bit = 17, 2028 .enable_bit = 17,
1934 .recalc = &omap2_followparent_recalc, 2029 .recalc = &omap2_followparent_recalc,
1935}; 2030};
1936 2031#endif /* OLD_CK */
1937/* 2032/*
1938 * This clock is a composite clock which does entire set changes then 2033 * This clock is a composite clock which does entire set changes then
1939 * forces a rebalance. It keys on the MPU speed, but it really could 2034 * forces a rebalance. It keys on the MPU speed, but it really could
@@ -1953,11 +2048,10 @@ static struct clk virt_prcm_set = {
1953 .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | 2048 .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
1954 VIRTUAL_CLOCK | ALWAYS_ENABLED | DELAYED_APP, 2049 VIRTUAL_CLOCK | ALWAYS_ENABLED | DELAYED_APP,
1955 .parent = &mpu_ck, /* Indexed by mpu speed, no parent */ 2050 .parent = &mpu_ck, /* Indexed by mpu speed, no parent */
1956 .recalc = &omap2_mpu_recalc, /* sets are keyed on mpu rate */
1957 .set_rate = &omap2_select_table_rate, 2051 .set_rate = &omap2_select_table_rate,
1958 .round_rate = &omap2_round_to_table_rate, 2052 .round_rate = &omap2_round_to_table_rate,
1959}; 2053};
1960 2054#ifdef OLD_CK
1961static struct clk *onchip_clks[] = { 2055static struct clk *onchip_clks[] = {
1962 /* external root sources */ 2056 /* external root sources */
1963 &func_32k_ck, 2057 &func_32k_ck,
@@ -2107,5 +2201,17 @@ static struct clk *onchip_clks[] = {
2107 &mmchsdb1_fck, 2201 &mmchsdb1_fck,
2108 &mmchsdb2_fck, 2202 &mmchsdb2_fck,
2109}; 2203};
2204#endif /* OLD_CK */
2205
2206static struct clk *onchip_24xx_clks[] __initdata = {
2207 /* external root sources */
2208 &osc_ck,
2209 &sys_ck,
2210 /* internal analog sources */
2211 &dpll_ck,
2212 &apll96_ck,
2213 &apll54_ck,
2214};
2110 2215
2111#endif 2216#endif
2217
diff --git a/arch/arm/mach-omap2/memory.c b/arch/arm/mach-omap2/memory.c
index b56c1a082d92..12479081881a 100644
--- a/arch/arm/mach-omap2/memory.c
+++ b/arch/arm/mach-omap2/memory.c
@@ -53,6 +53,54 @@ u32 omap2_memory_get_type(void)
53 return mem_timings.m_type; 53 return mem_timings.m_type;
54} 54}
55 55
56/*
57 * Check the DLL lock state, and return tue if running in unlock mode.
58 * This is needed to compensate for the shifted DLL value in unlock mode.
59 */
60u32 omap2_dll_force_needed(void)
61{
62 /* dlla and dllb are a set */
63 u32 dll_state = sdrc_read_reg(SDRC_DLLA_CTRL);
64
65 if ((dll_state & (1 << 2)) == (1 << 2))
66 return 1;
67 else
68 return 0;
69}
70
71/*
72 * 'level' is the value to store to CM_CLKSEL2_PLL.CORE_CLK_SRC.
73 * Practical values are CORE_CLK_SRC_DPLL (for CORE_CLK = DPLL_CLK) or
74 * CORE_CLK_SRC_DPLL_X2 (for CORE_CLK = * DPLL_CLK * 2)
75 */
76u32 omap2_reprogram_sdrc(u32 level, u32 force)
77{
78 u32 dll_ctrl, m_type;
79 u32 prev = curr_perf_level;
80 unsigned long flags;
81
82 if ((curr_perf_level == level) && !force)
83 return prev;
84
85 if (level == CORE_CLK_SRC_DPLL) {
86 dll_ctrl = omap2_memory_get_slow_dll_ctrl();
87 } else if (level == CORE_CLK_SRC_DPLL_X2) {
88 dll_ctrl = omap2_memory_get_fast_dll_ctrl();
89 } else {
90 return prev;
91 }
92
93 m_type = omap2_memory_get_type();
94
95 local_irq_save(flags);
96 __raw_writel(0xffff, OMAP24XX_PRCM_VOLTSETUP);
97 omap2_sram_reprogram_sdrc(level, dll_ctrl, m_type);
98 curr_perf_level = level;
99 local_irq_restore(flags);
100
101 return prev;
102}
103
56void omap2_init_memory_params(u32 force_lock_to_unlock_mode) 104void omap2_init_memory_params(u32 force_lock_to_unlock_mode)
57{ 105{
58 unsigned long dll_cnt; 106 unsigned long dll_cnt;
diff --git a/arch/arm/mach-omap2/memory.h b/arch/arm/mach-omap2/memory.h
index d212eea83a05..9a280b50a893 100644
--- a/arch/arm/mach-omap2/memory.h
+++ b/arch/arm/mach-omap2/memory.h
@@ -32,3 +32,5 @@ extern void omap2_init_memory_params(u32 force_lock_to_unlock_mode);
32extern u32 omap2_memory_get_slow_dll_ctrl(void); 32extern u32 omap2_memory_get_slow_dll_ctrl(void);
33extern u32 omap2_memory_get_fast_dll_ctrl(void); 33extern u32 omap2_memory_get_fast_dll_ctrl(void);
34extern u32 omap2_memory_get_type(void); 34extern u32 omap2_memory_get_type(void);
35u32 omap2_dll_force_needed(void);
36u32 omap2_reprogram_sdrc(u32 level, u32 force);
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 0a603242f367..32a533ba9ada 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -304,6 +304,23 @@ void propagate_rate(struct clk * tclk)
304 } 304 }
305} 305}
306 306
307/**
308 * recalculate_root_clocks - recalculate and propagate all root clocks
309 *
310 * Recalculates all root clocks (clocks with no parent), which if the
311 * clock's .recalc is set correctly, should also propagate their rates.
312 * Called at init.
313 */
314void recalculate_root_clocks(void)
315{
316 struct clk *clkp;
317
318 list_for_each_entry(clkp, &clocks, node) {
319 if (unlikely(!clkp->parent) && likely((u32)clkp->recalc))
320 clkp->recalc(clkp);
321 }
322}
323
307int clk_register(struct clk *clk) 324int clk_register(struct clk *clk)
308{ 325{
309 if (clk == NULL || IS_ERR(clk)) 326 if (clk == NULL || IS_ERR(clk))
@@ -358,6 +375,30 @@ void clk_allow_idle(struct clk *clk)
358} 375}
359EXPORT_SYMBOL(clk_allow_idle); 376EXPORT_SYMBOL(clk_allow_idle);
360 377
378void clk_enable_init_clocks(void)
379{
380 struct clk *clkp;
381
382 list_for_each_entry(clkp, &clocks, node) {
383 if (clkp->flags & ENABLE_ON_INIT)
384 clk_enable(clkp);
385 }
386}
387EXPORT_SYMBOL(clk_enable_init_clocks);
388
389#ifdef CONFIG_CPU_FREQ
390void clk_init_cpufreq_table(struct cpufreq_frequency_table **table)
391{
392 unsigned long flags;
393
394 spin_lock_irqsave(&clockfw_lock, flags);
395 if (arch_clock->clk_init_cpufreq_table)
396 arch_clock->clk_init_cpufreq_table(table);
397 spin_unlock_irqrestore(&clockfw_lock, flags);
398}
399EXPORT_SYMBOL(clk_init_cpufreq_table);
400#endif
401
361/*-------------------------------------------------------------------------*/ 402/*-------------------------------------------------------------------------*/
362 403
363#ifdef CONFIG_OMAP_RESET_CLOCKS 404#ifdef CONFIG_OMAP_RESET_CLOCKS
@@ -396,3 +437,4 @@ int __init clk_init(struct clk_functions * custom_clocks)
396 437
397 return 0; 438 return 0;
398} 439}
440
diff --git a/include/asm-arm/arch-omap/clock.h b/include/asm-arm/arch-omap/clock.h
index fc7b80643852..ff0f94de2de9 100644
--- a/include/asm-arm/arch-omap/clock.h
+++ b/include/asm-arm/arch-omap/clock.h
@@ -14,6 +14,30 @@
14#define __ARCH_ARM_OMAP_CLOCK_H 14#define __ARCH_ARM_OMAP_CLOCK_H
15 15
16struct module; 16struct module;
17struct clk;
18
19#if defined(CONFIG_ARCH_OMAP2)
20
21struct clksel_rate {
22 u8 div;
23 u32 val;
24 u8 flags;
25};
26
27struct clksel {
28 struct clk *parent;
29 const struct clksel_rate *rates;
30};
31
32struct dpll_data {
33 void __iomem *mult_div1_reg;
34 u32 mult_mask;
35 u32 div1_mask;
36 void __iomem *div2_reg;
37 u32 div2_mask;
38};
39
40#endif
17 41
18struct clk { 42struct clk {
19 struct list_head node; 43 struct list_head node;
@@ -25,8 +49,6 @@ struct clk {
25 __u32 flags; 49 __u32 flags;
26 void __iomem *enable_reg; 50 void __iomem *enable_reg;
27 __u8 enable_bit; 51 __u8 enable_bit;
28 __u8 rate_offset;
29 __u8 src_offset;
30 __s8 usecount; 52 __s8 usecount;
31 void (*recalc)(struct clk *); 53 void (*recalc)(struct clk *);
32 int (*set_rate)(struct clk *, unsigned long); 54 int (*set_rate)(struct clk *, unsigned long);
@@ -34,6 +56,16 @@ struct clk {
34 void (*init)(struct clk *); 56 void (*init)(struct clk *);
35 int (*enable)(struct clk *); 57 int (*enable)(struct clk *);
36 void (*disable)(struct clk *); 58 void (*disable)(struct clk *);
59#if defined(CONFIG_ARCH_OMAP2)
60 u8 fixed_div;
61 void __iomem *clksel_reg;
62 u32 clksel_mask;
63 const struct clksel *clksel;
64 const struct dpll_data *dpll_data;
65#else
66 __u8 rate_offset;
67 __u8 src_offset;
68#endif
37}; 69};
38 70
39struct clk_functions { 71struct clk_functions {
@@ -54,10 +86,12 @@ extern int clk_init(struct clk_functions * custom_clocks);
54extern int clk_register(struct clk *clk); 86extern int clk_register(struct clk *clk);
55extern void clk_unregister(struct clk *clk); 87extern void clk_unregister(struct clk *clk);
56extern void propagate_rate(struct clk *clk); 88extern void propagate_rate(struct clk *clk);
89extern void recalculate_root_clocks(void);
57extern void followparent_recalc(struct clk * clk); 90extern void followparent_recalc(struct clk * clk);
58extern void clk_allow_idle(struct clk *clk); 91extern void clk_allow_idle(struct clk *clk);
59extern void clk_deny_idle(struct clk *clk); 92extern void clk_deny_idle(struct clk *clk);
60extern int clk_get_usecount(struct clk *clk); 93extern int clk_get_usecount(struct clk *clk);
94extern void clk_enable_init_clocks(void);
61 95
62/* Clock flags */ 96/* Clock flags */
63#define RATE_CKCTL (1 << 0) /* Main fixed ratio clocks */ 97#define RATE_CKCTL (1 << 0) /* Main fixed ratio clocks */
@@ -71,22 +105,29 @@ extern int clk_get_usecount(struct clk *clk);
71#define CLOCK_NO_IDLE_PARENT (1 << 8) 105#define CLOCK_NO_IDLE_PARENT (1 << 8)
72#define DELAYED_APP (1 << 9) /* Delay application of clock */ 106#define DELAYED_APP (1 << 9) /* Delay application of clock */
73#define CONFIG_PARTICIPANT (1 << 10) /* Fundamental clock */ 107#define CONFIG_PARTICIPANT (1 << 10) /* Fundamental clock */
74#define CM_MPU_SEL1 (1 << 11) /* Domain divider/source */ 108#define ENABLE_ON_INIT (1 << 11) /* Enable upon framework init */
75#define CM_DSP_SEL1 (1 << 12) 109#define INVERT_ENABLE (1 << 12) /* 0 enables, 1 disables */
76#define CM_GFX_SEL1 (1 << 13) 110/* bits 13-20 are currently free */
77#define CM_MODEM_SEL1 (1 << 14)
78#define CM_CORE_SEL1 (1 << 15) /* Sets divider for many */
79#define CM_CORE_SEL2 (1 << 16) /* sets parent for GPT */
80#define CM_WKUP_SEL1 (1 << 17)
81#define CM_PLL_SEL1 (1 << 18)
82#define CM_PLL_SEL2 (1 << 19)
83#define CM_SYSCLKOUT_SEL1 (1 << 20)
84#define CLOCK_IN_OMAP310 (1 << 21) 111#define CLOCK_IN_OMAP310 (1 << 21)
85#define CLOCK_IN_OMAP730 (1 << 22) 112#define CLOCK_IN_OMAP730 (1 << 22)
86#define CLOCK_IN_OMAP1510 (1 << 23) 113#define CLOCK_IN_OMAP1510 (1 << 23)
87#define CLOCK_IN_OMAP16XX (1 << 24) 114#define CLOCK_IN_OMAP16XX (1 << 24)
88#define CLOCK_IN_OMAP242X (1 << 25) 115#define CLOCK_IN_OMAP242X (1 << 25)
89#define CLOCK_IN_OMAP243X (1 << 26) 116#define CLOCK_IN_OMAP243X (1 << 26)
117#define CLOCK_IN_OMAP343X (1 << 27) /* clocks common to all 343X */
118#define PARENT_CONTROLS_CLOCK (1 << 28)
119#define CLOCK_IN_OMAP3430ES1 (1 << 29) /* 3430ES1 clocks only */
120#define CLOCK_IN_OMAP3430ES2 (1 << 30) /* 3430ES2 clocks only */
121
122/* Clksel_rate flags */
123#define DEFAULT_RATE (1 << 0)
124#define RATE_IN_242X (1 << 1)
125#define RATE_IN_243X (1 << 2)
126#define RATE_IN_343X (1 << 3) /* rates common to all 343X */
127#define RATE_IN_3430ES2 (1 << 4) /* 3430ES2 rates only */
128
129#define RATE_IN_24XX (RATE_IN_242X | RATE_IN_243X)
130
90 131
91/* CM_CLKSEL2_PLL.CORE_CLK_SRC options (24XX) */ 132/* CM_CLKSEL2_PLL.CORE_CLK_SRC options (24XX) */
92#define CORE_CLK_SRC_32K 0 133#define CORE_CLK_SRC_32K 0
generated by cgit v1.2.2 (git 2.25.0) at 2025-12-14 12:50:59 -0500