diff options
| -rw-r--r-- | arch/arm/mach-ux500/board-mop500.c | 2 | ||||
| -rw-r--r-- | drivers/mfd/Kconfig | 9 | ||||
| -rw-r--r-- | drivers/mfd/Makefile | 2 | ||||
| -rw-r--r-- | drivers/mfd/ab4500-core.c | 209 | ||||
| -rw-r--r-- | drivers/mfd/ab8500-core.c | 444 | ||||
| -rw-r--r-- | drivers/mfd/ab8500-spi.c | 133 | ||||
| -rw-r--r-- | include/linux/mfd/ab4500.h | 262 | ||||
| -rw-r--r-- | include/linux/mfd/ab8500.h | 128 |
8 files changed, 712 insertions, 477 deletions
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 072196c57263..bb8d7b771817 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c | |||
| @@ -50,7 +50,7 @@ struct pl022_config_chip ab4500_chip_info = { | |||
| 50 | 50 | ||
| 51 | static struct spi_board_info u8500_spi_devices[] = { | 51 | static struct spi_board_info u8500_spi_devices[] = { |
| 52 | { | 52 | { |
| 53 | .modalias = "ab4500", | 53 | .modalias = "ab8500", |
| 54 | .controller_data = &ab4500_chip_info, | 54 | .controller_data = &ab4500_chip_info, |
| 55 | .max_speed_hz = 12000000, | 55 | .max_speed_hz = 12000000, |
| 56 | .bus_num = 0, | 56 | .bus_num = 0, |
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index b84b7078e909..9da0e504bbe9 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig | |||
| @@ -420,11 +420,12 @@ config EZX_PCAP | |||
| 420 | This enables the PCAP ASIC present on EZX Phones. This is | 420 | This enables the PCAP ASIC present on EZX Phones. This is |
| 421 | needed for MMC, TouchScreen, Sound, USB, etc.. | 421 | needed for MMC, TouchScreen, Sound, USB, etc.. |
| 422 | 422 | ||
| 423 | config AB4500_CORE | 423 | config AB8500_CORE |
| 424 | tristate "ST-Ericsson's AB4500 Mixed Signal Power management chip" | 424 | bool "ST-Ericsson AB8500 Mixed Signal Power Management chip" |
| 425 | depends on SPI | 425 | depends on SPI=y && GENERIC_HARDIRQS |
| 426 | select MFD_CORE | ||
| 426 | help | 427 | help |
| 427 | Select this option to enable access to AB4500 power management | 428 | Select this option to enable access to AB8500 power management |
| 428 | chip. This connects to U8500 on the SSP/SPI bus and exports | 429 | chip. This connects to U8500 on the SSP/SPI bus and exports |
| 429 | read/write functions for the devices to get access to this chip. | 430 | read/write functions for the devices to get access to this chip. |
| 430 | This chip embeds various other multimedia funtionalities as well. | 431 | This chip embeds various other multimedia funtionalities as well. |
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index ca1517e948af..fb503e77dc60 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile | |||
| @@ -64,8 +64,8 @@ obj-$(CONFIG_PCF50633_GPIO) += pcf50633-gpio.o | |||
| 64 | obj-$(CONFIG_ABX500_CORE) += abx500-core.o | 64 | obj-$(CONFIG_ABX500_CORE) += abx500-core.o |
| 65 | obj-$(CONFIG_AB3100_CORE) += ab3100-core.o | 65 | obj-$(CONFIG_AB3100_CORE) += ab3100-core.o |
| 66 | obj-$(CONFIG_AB3100_OTP) += ab3100-otp.o | 66 | obj-$(CONFIG_AB3100_OTP) += ab3100-otp.o |
| 67 | obj-$(CONFIG_AB4500_CORE) += ab4500-core.o | ||
| 68 | obj-$(CONFIG_AB3550_CORE) += ab3550-core.o | 67 | obj-$(CONFIG_AB3550_CORE) += ab3550-core.o |
| 68 | obj-$(CONFIG_AB8500_CORE) += ab8500-core.o ab8500-spi.o | ||
| 69 | obj-$(CONFIG_MFD_TIMBERDALE) += timberdale.o | 69 | obj-$(CONFIG_MFD_TIMBERDALE) += timberdale.o |
| 70 | obj-$(CONFIG_PMIC_ADP5520) += adp5520.o | 70 | obj-$(CONFIG_PMIC_ADP5520) += adp5520.o |
| 71 | obj-$(CONFIG_LPC_SCH) += lpc_sch.o | 71 | obj-$(CONFIG_LPC_SCH) += lpc_sch.o |
diff --git a/drivers/mfd/ab4500-core.c b/drivers/mfd/ab4500-core.c deleted file mode 100644 index c275daa3ab1a..000000000000 --- a/drivers/mfd/ab4500-core.c +++ /dev/null | |||
| @@ -1,209 +0,0 @@ | |||
| 1 | /* | ||
| 2 | * Copyright (C) 2009 ST-Ericsson | ||
| 3 | * | ||
| 4 | * Author: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com> | ||
| 5 | * | ||
| 6 | * This program is free software; you can redistribute it | ||
| 7 | * and/or modify it under the terms of the GNU General Public | ||
| 8 | * License version 2, as published by the Free Software Foundation. | ||
| 9 | * | ||
| 10 | * AB4500 is a companion power management chip used with U8500. | ||
| 11 | * On this platform, this is interfaced with SSP0 controller | ||
| 12 | * which is a ARM primecell pl022. | ||
| 13 | * | ||
| 14 | * At the moment the module just exports read/write features. | ||
| 15 | * Interrupt management to be added - TODO. | ||
| 16 | */ | ||
| 17 | #include <linux/kernel.h> | ||
| 18 | #include <linux/slab.h> | ||
| 19 | #include <linux/init.h> | ||
| 20 | #include <linux/module.h> | ||
| 21 | #include <linux/platform_device.h> | ||
| 22 | #include <linux/spi/spi.h> | ||
| 23 | #include <linux/mfd/ab4500.h> | ||
| 24 | |||
| 25 | /* just required if probe fails, we need to | ||
| 26 | * unregister the device | ||
| 27 | */ | ||
| 28 | static struct spi_driver ab4500_driver; | ||
| 29 | |||
| 30 | /* | ||
| 31 | * This funtion writes to any AB4500 registers using | ||
| 32 | * SPI protocol & before it writes it packs the data | ||
| 33 | * in the below 24 bit frame format | ||
| 34 | * | ||
| 35 | * *|------------------------------------| | ||
| 36 | * *| 23|22...18|17.......10|9|8|7......0| | ||
| 37 | * *| r/w bank adr data | | ||
| 38 | * * ------------------------------------ | ||
| 39 | * | ||
| 40 | * This function shouldn't be called from interrupt | ||
| 41 | * context | ||
| 42 | */ | ||
| 43 | int ab4500_write(struct ab4500 *ab4500, unsigned char block, | ||
| 44 | unsigned long addr, unsigned char data) | ||
| 45 | { | ||
| 46 | struct spi_transfer xfer; | ||
| 47 | struct spi_message msg; | ||
| 48 | int err; | ||
| 49 | unsigned long spi_data = | ||
| 50 | block << 18 | addr << 10 | data; | ||
| 51 | |||
| 52 | mutex_lock(&ab4500->lock); | ||
| 53 | ab4500->tx_buf[0] = spi_data; | ||
| 54 | ab4500->rx_buf[0] = 0; | ||
| 55 | |||
| 56 | xfer.tx_buf = ab4500->tx_buf; | ||
| 57 | xfer.rx_buf = NULL; | ||
| 58 | xfer.len = sizeof(unsigned long); | ||
| 59 | |||
| 60 | spi_message_init(&msg); | ||
| 61 | spi_message_add_tail(&xfer, &msg); | ||
| 62 | |||
| 63 | err = spi_sync(ab4500->spi, &msg); | ||
| 64 | mutex_unlock(&ab4500->lock); | ||
| 65 | |||
| 66 | return err; | ||
| 67 | } | ||
| 68 | EXPORT_SYMBOL(ab4500_write); | ||
| 69 | |||
| 70 | int ab4500_read(struct ab4500 *ab4500, unsigned char block, | ||
| 71 | unsigned long addr) | ||
| 72 | { | ||
| 73 | struct spi_transfer xfer; | ||
| 74 | struct spi_message msg; | ||
| 75 | unsigned long spi_data = | ||
| 76 | 1 << 23 | block << 18 | addr << 10; | ||
| 77 | |||
| 78 | mutex_lock(&ab4500->lock); | ||
| 79 | ab4500->tx_buf[0] = spi_data; | ||
| 80 | ab4500->rx_buf[0] = 0; | ||
| 81 | |||
| 82 | xfer.tx_buf = ab4500->tx_buf; | ||
| 83 | xfer.rx_buf = ab4500->rx_buf; | ||
| 84 | xfer.len = sizeof(unsigned long); | ||
| 85 | |||
| 86 | spi_message_init(&msg); | ||
| 87 | spi_message_add_tail(&xfer, &msg); | ||
| 88 | |||
| 89 | spi_sync(ab4500->spi, &msg); | ||
| 90 | mutex_unlock(&ab4500->lock); | ||
| 91 | |||
| 92 | return ab4500->rx_buf[0]; | ||
| 93 | } | ||
| 94 | EXPORT_SYMBOL(ab4500_read); | ||
| 95 | |||
| 96 | /* ref: ab3100 core */ | ||
| 97 | #define AB4500_DEVICE(devname, devid) \ | ||
| 98 | static struct platform_device ab4500_##devname##_device = { \ | ||
| 99 | .name = devid, \ | ||
| 100 | .id = -1, \ | ||
| 101 | } | ||
| 102 | |||
| 103 | /* list of childern devices of ab4500 - all are | ||
| 104 | * not populated here - TODO | ||
| 105 | */ | ||
| 106 | AB4500_DEVICE(charger, "ab4500-charger"); | ||
| 107 | AB4500_DEVICE(audio, "ab4500-audio"); | ||
| 108 | AB4500_DEVICE(usb, "ab4500-usb"); | ||
| 109 | AB4500_DEVICE(tvout, "ab4500-tvout"); | ||
| 110 | AB4500_DEVICE(sim, "ab4500-sim"); | ||
| 111 | AB4500_DEVICE(gpadc, "ab4500-gpadc"); | ||
| 112 | AB4500_DEVICE(clkmgt, "ab4500-clkmgt"); | ||
| 113 | AB4500_DEVICE(misc, "ab4500-misc"); | ||
| 114 | |||
| 115 | static struct platform_device *ab4500_platform_devs[] = { | ||
| 116 | &ab4500_charger_device, | ||
| 117 | &ab4500_audio_device, | ||
| 118 | &ab4500_usb_device, | ||
| 119 | &ab4500_tvout_device, | ||
| 120 | &ab4500_sim_device, | ||
| 121 | &ab4500_gpadc_device, | ||
| 122 | &ab4500_clkmgt_device, | ||
| 123 | &ab4500_misc_device, | ||
| 124 | }; | ||
| 125 | |||
| 126 | static int __init ab4500_probe(struct spi_device *spi) | ||
| 127 | { | ||
| 128 | struct ab4500 *ab4500; | ||
| 129 | unsigned char revision; | ||
| 130 | int err = 0; | ||
| 131 | int i; | ||
| 132 | |||
| 133 | ab4500 = kzalloc(sizeof *ab4500, GFP_KERNEL); | ||
| 134 | if (!ab4500) { | ||
| 135 | dev_err(&spi->dev, "could not allocate AB4500\n"); | ||
| 136 | err = -ENOMEM; | ||
| 137 | goto not_detect; | ||
| 138 | } | ||
| 139 | |||
| 140 | ab4500->spi = spi; | ||
| 141 | spi_set_drvdata(spi, ab4500); | ||
| 142 | |||
| 143 | mutex_init(&ab4500->lock); | ||
| 144 | |||
| 145 | /* read the revision register */ | ||
| 146 | revision = ab4500_read(ab4500, AB4500_MISC, AB4500_REV_REG); | ||
| 147 | |||
| 148 | /* revision id 0x0 is for early drop, 0x10 is for cut1.0 */ | ||
| 149 | if (revision == 0x0 || revision == 0x10) | ||
| 150 | dev_info(&spi->dev, "Detected chip: %s, revision = %x\n", | ||
| 151 | ab4500_driver.driver.name, revision); | ||
| 152 | else { | ||
| 153 | dev_err(&spi->dev, "unknown chip: 0x%x\n", revision); | ||
| 154 | goto not_detect; | ||
| 155 | } | ||
| 156 | |||
| 157 | for (i = 0; i < ARRAY_SIZE(ab4500_platform_devs); i++) { | ||
| 158 | ab4500_platform_devs[i]->dev.parent = | ||
| 159 | &spi->dev; | ||
| 160 | platform_set_drvdata(ab4500_platform_devs[i], ab4500); | ||
| 161 | } | ||
| 162 | |||
| 163 | /* register the ab4500 platform devices */ | ||
| 164 | platform_add_devices(ab4500_platform_devs, | ||
| 165 | ARRAY_SIZE(ab4500_platform_devs)); | ||
| 166 | |||
| 167 | return err; | ||
| 168 | |||
| 169 | not_detect: | ||
| 170 | spi_unregister_driver(&ab4500_driver); | ||
| 171 | kfree(ab4500); | ||
| 172 | return err; | ||
| 173 | } | ||
| 174 | |||
| 175 | static int __devexit ab4500_remove(struct spi_device *spi) | ||
| 176 | { | ||
| 177 | struct ab4500 *ab4500 = | ||
| 178 | spi_get_drvdata(spi); | ||
| 179 | |||
| 180 | kfree(ab4500); | ||
| 181 | |||
| 182 | return 0; | ||
| 183 | } | ||
| 184 | |||
| 185 | static struct spi_driver ab4500_driver = { | ||
| 186 | .driver = { | ||
| 187 | .name = "ab4500", | ||
| 188 | .owner = THIS_MODULE, | ||
| 189 | }, | ||
| 190 | .probe = ab4500_probe, | ||
| 191 | .remove = __devexit_p(ab4500_remove) | ||
| 192 | }; | ||
| 193 | |||
| 194 | static int __devinit ab4500_init(void) | ||
| 195 | { | ||
| 196 | return spi_register_driver(&ab4500_driver); | ||
| 197 | } | ||
| 198 | |||
| 199 | static void __exit ab4500_exit(void) | ||
| 200 | { | ||
| 201 | spi_unregister_driver(&ab4500_driver); | ||
| 202 | } | ||
| 203 | |||
| 204 | subsys_initcall(ab4500_init); | ||
| 205 | module_exit(ab4500_exit); | ||
| 206 | |||
| 207 | MODULE_AUTHOR("Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com"); | ||
| 208 | MODULE_DESCRIPTION("AB4500 core driver"); | ||
| 209 | MODULE_LICENSE("GPL"); | ||
diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c new file mode 100644 index 000000000000..f3d26fa9c34d --- /dev/null +++ b/drivers/mfd/ab8500-core.c | |||
| @@ -0,0 +1,444 @@ | |||
| 1 | /* | ||
| 2 | * Copyright (C) ST-Ericsson SA 2010 | ||
| 3 | * | ||
| 4 | * License Terms: GNU General Public License v2 | ||
| 5 | * Author: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> | ||
| 6 | * Author: Rabin Vincent <rabin.vincent@stericsson.com> | ||
| 7 | */ | ||
| 8 | |||
| 9 | #include <linux/kernel.h> | ||
| 10 | #include <linux/slab.h> | ||
| 11 | #include <linux/init.h> | ||
| 12 | #include <linux/irq.h> | ||
| 13 | #include <linux/delay.h> | ||
| 14 | #include <linux/interrupt.h> | ||
| 15 | #include <linux/module.h> | ||
| 16 | #include <linux/platform_device.h> | ||
| 17 | #include <linux/mfd/core.h> | ||
| 18 | #include <linux/mfd/ab8500.h> | ||
| 19 | |||
| 20 | /* | ||
| 21 | * Interrupt register offsets | ||
| 22 | * Bank : 0x0E | ||
| 23 | */ | ||
| 24 | #define AB8500_IT_SOURCE1_REG 0x0E00 | ||
| 25 | #define AB8500_IT_SOURCE2_REG 0x0E01 | ||
| 26 | #define AB8500_IT_SOURCE3_REG 0x0E02 | ||
| 27 | #define AB8500_IT_SOURCE4_REG 0x0E03 | ||
| 28 | #define AB8500_IT_SOURCE5_REG 0x0E04 | ||
| 29 | #define AB8500_IT_SOURCE6_REG 0x0E05 | ||
| 30 | #define AB8500_IT_SOURCE7_REG 0x0E06 | ||
| 31 | #define AB8500_IT_SOURCE8_REG 0x0E07 | ||
| 32 | #define AB8500_IT_SOURCE19_REG 0x0E12 | ||
| 33 | #define AB8500_IT_SOURCE20_REG 0x0E13 | ||
| 34 | #define AB8500_IT_SOURCE21_REG 0x0E14 | ||
| 35 | #define AB8500_IT_SOURCE22_REG 0x0E15 | ||
| 36 | #define AB8500_IT_SOURCE23_REG 0x0E16 | ||
| 37 | #define AB8500_IT_SOURCE24_REG 0x0E17 | ||
| 38 | |||
| 39 | /* | ||
| 40 | * latch registers | ||
| 41 | */ | ||
| 42 | #define AB8500_IT_LATCH1_REG 0x0E20 | ||
| 43 | #define AB8500_IT_LATCH2_REG 0x0E21 | ||
| 44 | #define AB8500_IT_LATCH3_REG 0x0E22 | ||
| 45 | #define AB8500_IT_LATCH4_REG 0x0E23 | ||
| 46 | #define AB8500_IT_LATCH5_REG 0x0E24 | ||
| 47 | #define AB8500_IT_LATCH6_REG 0x0E25 | ||
| 48 | #define AB8500_IT_LATCH7_REG 0x0E26 | ||
| 49 | #define AB8500_IT_LATCH8_REG 0x0E27 | ||
| 50 | #define AB8500_IT_LATCH9_REG 0x0E28 | ||
| 51 | #define AB8500_IT_LATCH10_REG 0x0E29 | ||
| 52 | #define AB8500_IT_LATCH19_REG 0x0E32 | ||
| 53 | #define AB8500_IT_LATCH20_REG 0x0E33 | ||
| 54 | #define AB8500_IT_LATCH21_REG 0x0E34 | ||
| 55 | #define AB8500_IT_LATCH22_REG 0x0E35 | ||
| 56 | #define AB8500_IT_LATCH23_REG 0x0E36 | ||
| 57 | #define AB8500_IT_LATCH24_REG 0x0E37 | ||
| 58 | |||
| 59 | /* | ||
| 60 | * mask registers | ||
| 61 | */ | ||
| 62 | |||
| 63 | #define AB8500_IT_MASK1_REG 0x0E40 | ||
| 64 | #define AB8500_IT_MASK2_REG 0x0E41 | ||
| 65 | #define AB8500_IT_MASK3_REG 0x0E42 | ||
| 66 | #define AB8500_IT_MASK4_REG 0x0E43 | ||
| 67 | #define AB8500_IT_MASK5_REG 0x0E44 | ||
| 68 | #define AB8500_IT_MASK6_REG 0x0E45 | ||
| 69 | #define AB8500_IT_MASK7_REG 0x0E46 | ||
| 70 | #define AB8500_IT_MASK8_REG 0x0E47 | ||
| 71 | #define AB8500_IT_MASK9_REG 0x0E48 | ||
| 72 | #define AB8500_IT_MASK10_REG 0x0E49 | ||
| 73 | #define AB8500_IT_MASK11_REG 0x0E4A | ||
| 74 | #define AB8500_IT_MASK12_REG 0x0E4B | ||
| 75 | #define AB8500_IT_MASK13_REG 0x0E4C | ||
| 76 | #define AB8500_IT_MASK14_REG 0x0E4D | ||
| 77 | #define AB8500_IT_MASK15_REG 0x0E4E | ||
| 78 | #define AB8500_IT_MASK16_REG 0x0E4F | ||
| 79 | #define AB8500_IT_MASK17_REG 0x0E50 | ||
| 80 | #define AB8500_IT_MASK18_REG 0x0E51 | ||
| 81 | #define AB8500_IT_MASK19_REG 0x0E52 | ||
| 82 | #define AB8500_IT_MASK20_REG 0x0E53 | ||
| 83 | #define AB8500_IT_MASK21_REG 0x0E54 | ||
| 84 | #define AB8500_IT_MASK22_REG 0x0E55 | ||
| 85 | #define AB8500_IT_MASK23_REG 0x0E56 | ||
| 86 | #define AB8500_IT_MASK24_REG 0x0E57 | ||
| 87 | |||
| 88 | #define AB8500_REV_REG 0x1080 | ||
| 89 | |||
| 90 | /* | ||
| 91 | * Map interrupt numbers to the LATCH and MASK register offsets, Interrupt | ||
| 92 | * numbers are indexed into this array with (num / 8). | ||
| 93 | * | ||
| 94 | * This is one off from the register names, i.e. AB8500_IT_MASK1_REG is at | ||
| 95 | * offset 0. | ||
| 96 | */ | ||
| 97 | static const int ab8500_irq_regoffset[AB8500_NUM_IRQ_REGS] = { | ||
| 98 | 0, 1, 2, 3, 4, 6, 7, 8, 9, 18, 19, 20, 21, | ||
| 99 | }; | ||
| 100 | |||
| 101 | static int __ab8500_write(struct ab8500 *ab8500, u16 addr, u8 data) | ||
| 102 | { | ||
| 103 | int ret; | ||
| 104 | |||
| 105 | dev_vdbg(ab8500->dev, "wr: addr %#x <= %#x\n", addr, data); | ||
| 106 | |||
| 107 | ret = ab8500->write(ab8500, addr, data); | ||
| 108 | if (ret < 0) | ||
| 109 | dev_err(ab8500->dev, "failed to write reg %#x: %d\n", | ||
| 110 | addr, ret); | ||
| 111 | |||
| 112 | return ret; | ||
| 113 | } | ||
| 114 | |||
| 115 | /** | ||
| 116 | * ab8500_write() - write an AB8500 register | ||
| 117 | * @ab8500: device to write to | ||
| 118 | * @addr: address of the register | ||
| 119 | * @data: value to write | ||
| 120 | */ | ||
| 121 | int ab8500_write(struct ab8500 *ab8500, u16 addr, u8 data) | ||
| 122 | { | ||
| 123 | int ret; | ||
| 124 | |||
| 125 | mutex_lock(&ab8500->lock); | ||
| 126 | ret = __ab8500_write(ab8500, addr, data); | ||
| 127 | mutex_unlock(&ab8500->lock); | ||
| 128 | |||
| 129 | return ret; | ||
| 130 | } | ||
| 131 | EXPORT_SYMBOL_GPL(ab8500_write); | ||
| 132 | |||
| 133 | static int __ab8500_read(struct ab8500 *ab8500, u16 addr) | ||
| 134 | { | ||
| 135 | int ret; | ||
| 136 | |||
| 137 | ret = ab8500->read(ab8500, addr); | ||
| 138 | if (ret < 0) | ||
| 139 | dev_err(ab8500->dev, "failed to read reg %#x: %d\n", | ||
| 140 | addr, ret); | ||
| 141 | |||
| 142 | dev_vdbg(ab8500->dev, "rd: addr %#x => data %#x\n", addr, ret); | ||
| 143 | |||
| 144 | return ret; | ||
| 145 | } | ||
| 146 | |||
| 147 | /** | ||
| 148 | * ab8500_read() - read an AB8500 register | ||
| 149 | * @ab8500: device to read from | ||
| 150 | * @addr: address of the register | ||
| 151 | */ | ||
| 152 | int ab8500_read(struct ab8500 *ab8500, u16 addr) | ||
| 153 | { | ||
| 154 | int ret; | ||
| 155 | |||
| 156 | mutex_lock(&ab8500->lock); | ||
| 157 | ret = __ab8500_read(ab8500, addr); | ||
| 158 | mutex_unlock(&ab8500->lock); | ||
| 159 | |||
| 160 | return ret; | ||
| 161 | } | ||
| 162 | EXPORT_SYMBOL_GPL(ab8500_read); | ||
| 163 | |||
| 164 | /** | ||
| 165 | * ab8500_set_bits() - set a bitfield in an AB8500 register | ||
| 166 | * @ab8500: device to read from | ||
| 167 | * @addr: address of the register | ||
| 168 | * @mask: mask of the bitfield to modify | ||
| 169 | * @data: value to set to the bitfield | ||
| 170 | */ | ||
| 171 | int ab8500_set_bits(struct ab8500 *ab8500, u16 addr, u8 mask, u8 data) | ||
| 172 | { | ||
| 173 | int ret; | ||
| 174 | |||
| 175 | mutex_lock(&ab8500->lock); | ||
| 176 | |||
| 177 | ret = __ab8500_read(ab8500, addr); | ||
| 178 | if (ret < 0) | ||
| 179 | goto out; | ||
| 180 | |||
| 181 | ret &= ~mask; | ||
| 182 | ret |= data; | ||
| 183 | |||
| 184 | ret = __ab8500_write(ab8500, addr, ret); | ||
| 185 | |||
| 186 | out: | ||
| 187 | mutex_unlock(&ab8500->lock); | ||
| 188 | return ret; | ||
| 189 | } | ||
| 190 | EXPORT_SYMBOL_GPL(ab8500_set_bits); | ||
| 191 | |||
| 192 | static void ab8500_irq_lock(unsigned int irq) | ||
| 193 | { | ||
| 194 | struct ab8500 *ab8500 = get_irq_chip_data(irq); | ||
| 195 | |||
| 196 | mutex_lock(&ab8500->irq_lock); | ||
| 197 | } | ||
| 198 | |||
| 199 | static void ab8500_irq_sync_unlock(unsigned int irq) | ||
| 200 | { | ||
| 201 | struct ab8500 *ab8500 = get_irq_chip_data(irq); | ||
| 202 | int i; | ||
| 203 | |||
| 204 | for (i = 0; i < AB8500_NUM_IRQ_REGS; i++) { | ||
| 205 | u8 old = ab8500->oldmask[i]; | ||
| 206 | u8 new = ab8500->mask[i]; | ||
| 207 | int reg; | ||
| 208 | |||
| 209 | if (new == old) | ||
| 210 | continue; | ||
| 211 | |||
| 212 | ab8500->oldmask[i] = new; | ||
| 213 | |||
| 214 | reg = AB8500_IT_MASK1_REG + ab8500_irq_regoffset[i]; | ||
| 215 | ab8500_write(ab8500, reg, new); | ||
| 216 | } | ||
| 217 | |||
| 218 | mutex_unlock(&ab8500->irq_lock); | ||
| 219 | } | ||
| 220 | |||
| 221 | static void ab8500_irq_mask(unsigned int irq) | ||
| 222 | { | ||
| 223 | struct ab8500 *ab8500 = get_irq_chip_data(irq); | ||
| 224 | int offset = irq - ab8500->irq_base; | ||
| 225 | int index = offset / 8; | ||
| 226 | int mask = 1 << (offset % 8); | ||
| 227 | |||
| 228 | ab8500->mask[index] |= mask; | ||
| 229 | } | ||
| 230 | |||
| 231 | static void ab8500_irq_unmask(unsigned int irq) | ||
| 232 | { | ||
| 233 | struct ab8500 *ab8500 = get_irq_chip_data(irq); | ||
| 234 | int offset = irq - ab8500->irq_base; | ||
| 235 | int index = offset / 8; | ||
| 236 | int mask = 1 << (offset % 8); | ||
| 237 | |||
| 238 | ab8500->mask[index] &= ~mask; | ||
| 239 | } | ||
| 240 | |||
| 241 | static struct irq_chip ab8500_irq_chip = { | ||
| 242 | .name = "ab8500", | ||
| 243 | .bus_lock = ab8500_irq_lock, | ||
| 244 | .bus_sync_unlock = ab8500_irq_sync_unlock, | ||
| 245 | .mask = ab8500_irq_mask, | ||
| 246 | .unmask = ab8500_irq_unmask, | ||
| 247 | }; | ||
| 248 | |||
| 249 | static irqreturn_t ab8500_irq(int irq, void *dev) | ||
| 250 | { | ||
| 251 | struct ab8500 *ab8500 = dev; | ||
| 252 | int i; | ||
| 253 | |||
| 254 | dev_vdbg(ab8500->dev, "interrupt\n"); | ||
| 255 | |||
| 256 | for (i = 0; i < AB8500_NUM_IRQ_REGS; i++) { | ||
| 257 | int regoffset = ab8500_irq_regoffset[i]; | ||
| 258 | int status; | ||
| 259 | |||
| 260 | status = ab8500_read(ab8500, AB8500_IT_LATCH1_REG + regoffset); | ||
| 261 | if (status <= 0) | ||
| 262 | continue; | ||
| 263 | |||
| 264 | do { | ||
| 265 | int bit = __ffs(status); | ||
| 266 | int line = i * 8 + bit; | ||
| 267 | |||
| 268 | handle_nested_irq(ab8500->irq_base + line); | ||
| 269 | status &= ~(1 << bit); | ||
| 270 | } while (status); | ||
| 271 | } | ||
| 272 | |||
| 273 | return IRQ_HANDLED; | ||
| 274 | } | ||
| 275 | |||
| 276 | static int ab8500_irq_init(struct ab8500 *ab8500) | ||
| 277 | { | ||
| 278 | int base = ab8500->irq_base; | ||
| 279 | int irq; | ||
| 280 | |||
| 281 | for (irq = base; irq < base + AB8500_NR_IRQS; irq++) { | ||
| 282 | set_irq_chip_data(irq, ab8500); | ||
| 283 | set_irq_chip_and_handler(irq, &ab8500_irq_chip, | ||
| 284 | handle_simple_irq); | ||
| 285 | set_irq_nested_thread(irq, 1); | ||
| 286 | #ifdef CONFIG_ARM | ||
| 287 | set_irq_flags(irq, IRQF_VALID); | ||
| 288 | #else | ||
| 289 | set_irq_noprobe(irq); | ||
| 290 | #endif | ||
| 291 | } | ||
| 292 | |||
| 293 | return 0; | ||
| 294 | } | ||
| 295 | |||
| 296 | static void ab8500_irq_remove(struct ab8500 *ab8500) | ||
| 297 | { | ||
| 298 | int base = ab8500->irq_base; | ||
| 299 | int irq; | ||
| 300 | |||
| 301 | for (irq = base; irq < base + AB8500_NR_IRQS; irq++) { | ||
| 302 | #ifdef CONFIG_ARM | ||
| 303 | set_irq_flags(irq, 0); | ||
| 304 | #endif | ||
| 305 | set_irq_chip_and_handler(irq, NULL, NULL); | ||
| 306 | set_irq_chip_data(irq, NULL); | ||
| 307 | } | ||
| 308 | } | ||
| 309 | |||
| 310 | static struct resource ab8500_gpadc_resources[] = { | ||
| 311 | { | ||
| 312 | .name = "HW_CONV_END", | ||
| 313 | .start = AB8500_INT_GP_HW_ADC_CONV_END, | ||
| 314 | .end = AB8500_INT_GP_HW_ADC_CONV_END, | ||
| 315 | .flags = IORESOURCE_IRQ, | ||
| 316 | }, | ||
| 317 | { | ||
| 318 | .name = "SW_CONV_END", | ||
| 319 | .start = AB8500_INT_GP_SW_ADC_CONV_END, | ||
| 320 | .end = AB8500_INT_GP_SW_ADC_CONV_END, | ||
| 321 | .flags = IORESOURCE_IRQ, | ||
| 322 | }, | ||
| 323 | }; | ||
| 324 | |||
| 325 | static struct resource ab8500_rtc_resources[] = { | ||
| 326 | { | ||
| 327 | .name = "60S", | ||
| 328 | .start = AB8500_INT_RTC_60S, | ||
| 329 | .end = AB8500_INT_RTC_60S, | ||
| 330 | .flags = IORESOURCE_IRQ, | ||
| 331 | }, | ||
| 332 | { | ||
| 333 | .name = "ALARM", | ||
| 334 | .start = AB8500_INT_RTC_ALARM, | ||
| 335 | .end = AB8500_INT_RTC_ALARM, | ||
| 336 | .flags = IORESOURCE_IRQ, | ||
| 337 | }, | ||
| 338 | }; | ||
| 339 | |||
| 340 | static struct mfd_cell ab8500_devs[] = { | ||
| 341 | { | ||
| 342 | .name = "ab8500-gpadc", | ||
| 343 | .num_resources = ARRAY_SIZE(ab8500_gpadc_resources), | ||
| 344 | .resources = ab8500_gpadc_resources, | ||
| 345 | }, | ||
| 346 | { | ||
| 347 | .name = "ab8500-rtc", | ||
| 348 | .num_resources = ARRAY_SIZE(ab8500_rtc_resources), | ||
| 349 | .resources = ab8500_rtc_resources, | ||
| 350 | }, | ||
| 351 | { .name = "ab8500-charger", }, | ||
| 352 | { .name = "ab8500-audio", }, | ||
| 353 | { .name = "ab8500-usb", }, | ||
| 354 | { .name = "ab8500-pwm", }, | ||
| 355 | }; | ||
| 356 | |||
| 357 | int __devinit ab8500_init(struct ab8500 *ab8500) | ||
| 358 | { | ||
| 359 | struct ab8500_platform_data *plat = dev_get_platdata(ab8500->dev); | ||
| 360 | int ret; | ||
| 361 | int i; | ||
| 362 | |||
| 363 | if (plat) | ||
| 364 | ab8500->irq_base = plat->irq_base; | ||
| 365 | |||
| 366 | mutex_init(&ab8500->lock); | ||
| 367 | mutex_init(&ab8500->irq_lock); | ||
| 368 | |||
| 369 | ret = ab8500_read(ab8500, AB8500_REV_REG); | ||
| 370 | if (ret < 0) | ||
| 371 | return ret; | ||
| 372 | |||
| 373 | /* | ||
| 374 | * 0x0 - Early Drop | ||
| 375 | * 0x10 - Cut 1.0 | ||
| 376 | * 0x11 - Cut 1.1 | ||
| 377 | */ | ||
| 378 | if (ret == 0x0 || ret == 0x10 || ret == 0x11) { | ||
| 379 | ab8500->revision = ret; | ||
| 380 | dev_info(ab8500->dev, "detected chip, revision: %#x\n", ret); | ||
| 381 | } else { | ||
| 382 | dev_err(ab8500->dev, "unknown chip, revision: %#x\n", ret); | ||
| 383 | return -EINVAL; | ||
| 384 | } | ||
| 385 | |||
| 386 | if (plat && plat->init) | ||
| 387 | plat->init(ab8500); | ||
| 388 | |||
| 389 | /* Clear and mask all interrupts */ | ||
| 390 | for (i = 0; i < 10; i++) { | ||
| 391 | ab8500_read(ab8500, AB8500_IT_LATCH1_REG + i); | ||
| 392 | ab8500_write(ab8500, AB8500_IT_MASK1_REG + i, 0xff); | ||
| 393 | } | ||
| 394 | |||
| 395 | for (i = 18; i < 24; i++) { | ||
| 396 | ab8500_read(ab8500, AB8500_IT_LATCH1_REG + i); | ||
| 397 | ab8500_write(ab8500, AB8500_IT_MASK1_REG + i, 0xff); | ||
| 398 | } | ||
| 399 | |||
| 400 | for (i = 0; i < AB8500_NUM_IRQ_REGS; i++) | ||
| 401 | ab8500->mask[i] = ab8500->oldmask[i] = 0xff; | ||
| 402 | |||
| 403 | if (ab8500->irq_base) { | ||
| 404 | ret = ab8500_irq_init(ab8500); | ||
| 405 | if (ret) | ||
| 406 | return ret; | ||
| 407 | |||
| 408 | ret = request_threaded_irq(ab8500->irq, NULL, ab8500_irq, | ||
| 409 | IRQF_ONESHOT, "ab8500", ab8500); | ||
| 410 | if (ret) | ||
| 411 | goto out_removeirq; | ||
| 412 | } | ||
| 413 | |||
| 414 | ret = mfd_add_devices(ab8500->dev, -1, ab8500_devs, | ||
| 415 | ARRAY_SIZE(ab8500_devs), NULL, | ||
| 416 | ab8500->irq_base); | ||
| 417 | if (ret) | ||
| 418 | goto out_freeirq; | ||
| 419 | |||
| 420 | return ret; | ||
| 421 | |||
| 422 | out_freeirq: | ||
| 423 | if (ab8500->irq_base) { | ||
| 424 | free_irq(ab8500->irq, ab8500); | ||
| 425 | out_removeirq: | ||
| 426 | ab8500_irq_remove(ab8500); | ||
| 427 | } | ||
| 428 | return ret; | ||
| 429 | } | ||
| 430 | |||
| 431 | int __devexit ab8500_exit(struct ab8500 *ab8500) | ||
| 432 | { | ||
| 433 | mfd_remove_devices(ab8500->dev); | ||
| 434 | if (ab8500->irq_base) { | ||
| 435 | free_irq(ab8500->irq, ab8500); | ||
| 436 | ab8500_irq_remove(ab8500); | ||
| 437 | } | ||
| 438 | |||
| 439 | return 0; | ||
| 440 | } | ||
| 441 | |||
| 442 | MODULE_AUTHOR("Srinidhi Kasagar, Rabin Vincent"); | ||
| 443 | MODULE_DESCRIPTION("AB8500 MFD core"); | ||
| 444 | MODULE_LICENSE("GPL v2"); | ||
diff --git a/drivers/mfd/ab8500-spi.c b/drivers/mfd/ab8500-spi.c new file mode 100644 index 000000000000..b81d4f768ef6 --- /dev/null +++ b/drivers/mfd/ab8500-spi.c | |||
| @@ -0,0 +1,133 @@ | |||
| 1 | /* | ||
| 2 | * Copyright (C) ST-Ericsson SA 2010 | ||
| 3 | * | ||
| 4 | * License Terms: GNU General Public License v2 | ||
| 5 | * Author: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> | ||
| 6 | */ | ||
| 7 | |||
| 8 | #include <linux/kernel.h> | ||
| 9 | #include <linux/slab.h> | ||
| 10 | #include <linux/init.h> | ||
| 11 | #include <linux/module.h> | ||
| 12 | #include <linux/platform_device.h> | ||
| 13 | #include <linux/spi/spi.h> | ||
| 14 | #include <linux/mfd/ab8500.h> | ||
| 15 | |||
| 16 | /* | ||
| 17 | * This funtion writes to any AB8500 registers using | ||
| 18 | * SPI protocol & before it writes it packs the data | ||
| 19 | * in the below 24 bit frame format | ||
| 20 | * | ||
| 21 | * *|------------------------------------| | ||
| 22 | * *| 23|22...18|17.......10|9|8|7......0| | ||
| 23 | * *| r/w bank adr data | | ||
| 24 | * * ------------------------------------ | ||
| 25 | * | ||
| 26 | * This function shouldn't be called from interrupt | ||
| 27 | * context | ||
| 28 | */ | ||
| 29 | static int ab8500_spi_write(struct ab8500 *ab8500, u16 addr, u8 data) | ||
| 30 | { | ||
| 31 | struct spi_device *spi = container_of(ab8500->dev, struct spi_device, | ||
| 32 | dev); | ||
| 33 | unsigned long spi_data = addr << 10 | data; | ||
| 34 | struct spi_transfer xfer; | ||
| 35 | struct spi_message msg; | ||
| 36 | |||
| 37 | ab8500->tx_buf[0] = spi_data; | ||
| 38 | ab8500->rx_buf[0] = 0; | ||
| 39 | |||
| 40 | xfer.tx_buf = ab8500->tx_buf; | ||
| 41 | xfer.rx_buf = NULL; | ||
| 42 | xfer.len = sizeof(unsigned long); | ||
| 43 | |||
| 44 | spi_message_init(&msg); | ||
| 45 | spi_message_add_tail(&xfer, &msg); | ||
| 46 | |||
| 47 | return spi_sync(spi, &msg); | ||
| 48 | } | ||
| 49 | |||
| 50 | static int ab8500_spi_read(struct ab8500 *ab8500, u16 addr) | ||
| 51 | { | ||
| 52 | struct spi_device *spi = container_of(ab8500->dev, struct spi_device, | ||
| 53 | dev); | ||
| 54 | unsigned long spi_data = 1 << 23 | addr << 10; | ||
| 55 | struct spi_transfer xfer; | ||
| 56 | struct spi_message msg; | ||
| 57 | int ret; | ||
| 58 | |||
| 59 | ab8500->tx_buf[0] = spi_data; | ||
| 60 | ab8500->rx_buf[0] = 0; | ||
| 61 | |||
| 62 | xfer.tx_buf = ab8500->tx_buf; | ||
| 63 | xfer.rx_buf = ab8500->rx_buf; | ||
| 64 | xfer.len = sizeof(unsigned long); | ||
| 65 | |||
| 66 | spi_message_init(&msg); | ||
| 67 | spi_message_add_tail(&xfer, &msg); | ||
| 68 | |||
| 69 | ret = spi_sync(spi, &msg); | ||
| 70 | if (!ret) | ||
| 71 | ret = ab8500->rx_buf[0]; | ||
| 72 | |||
| 73 | return ret; | ||
| 74 | } | ||
| 75 | |||
| 76 | static int __devinit ab8500_spi_probe(struct spi_device *spi) | ||
| 77 | { | ||
| 78 | struct ab8500 *ab8500; | ||
| 79 | int ret; | ||
| 80 | |||
| 81 | ab8500 = kzalloc(sizeof *ab8500, GFP_KERNEL); | ||
| 82 | if (!ab8500) | ||
| 83 | return -ENOMEM; | ||
| 84 | |||
| 85 | ab8500->dev = &spi->dev; | ||
| 86 | ab8500->irq = spi->irq; | ||
| 87 | |||
| 88 | ab8500->read = ab8500_spi_read; | ||
| 89 | ab8500->write = ab8500_spi_write; | ||
| 90 | |||
| 91 | spi_set_drvdata(spi, ab8500); | ||
| 92 | |||
| 93 | ret = ab8500_init(ab8500); | ||
| 94 | if (ret) | ||
| 95 | kfree(ab8500); | ||
| 96 | |||
| 97 | return ret; | ||
| 98 | } | ||
| 99 | |||
| 100 | static int __devexit ab8500_spi_remove(struct spi_device *spi) | ||
| 101 | { | ||
| 102 | struct ab8500 *ab8500 = spi_get_drvdata(spi); | ||
| 103 | |||
| 104 | ab8500_exit(ab8500); | ||
| 105 | kfree(ab8500); | ||
| 106 | |||
| 107 | return 0; | ||
| 108 | } | ||
| 109 | |||
| 110 | static struct spi_driver ab8500_spi_driver = { | ||
| 111 | .driver = { | ||
| 112 | .name = "ab8500", | ||
| 113 | .owner = THIS_MODULE, | ||
| 114 | }, | ||
| 115 | .probe = ab8500_spi_probe, | ||
| 116 | .remove = __devexit_p(ab8500_spi_remove) | ||
| 117 | }; | ||
| 118 | |||
| 119 | static int __init ab8500_spi_init(void) | ||
| 120 | { | ||
| 121 | return spi_register_driver(&ab8500_spi_driver); | ||
| 122 | } | ||
| 123 | subsys_initcall(ab8500_spi_init); | ||
| 124 | |||
| 125 | static void __exit ab8500_spi_exit(void) | ||
| 126 | { | ||
| 127 | spi_unregister_driver(&ab8500_spi_driver); | ||
| 128 | } | ||
| 129 | module_exit(ab8500_spi_exit); | ||
| 130 | |||
| 131 | MODULE_AUTHOR("Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com"); | ||
| 132 | MODULE_DESCRIPTION("AB8500 SPI"); | ||
| 133 | MODULE_LICENSE("GPL v2"); | ||
diff --git a/include/linux/mfd/ab4500.h b/include/linux/mfd/ab4500.h deleted file mode 100644 index a42a7033ae53..000000000000 --- a/include/linux/mfd/ab4500.h +++ /dev/null | |||
| @@ -1,262 +0,0 @@ | |||
| 1 | /* | ||
| 2 | * Copyright (C) 2009 ST-Ericsson | ||
| 3 | * | ||
| 4 | * Author: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com> | ||
| 5 | * | ||
| 6 | * This program is free software; you can redistribute it and/or modify | ||
| 7 | * it under the terms of the GNU General Public License version 2, as | ||
| 8 | * published by the Free Software Foundation. | ||
| 9 | * | ||
| 10 | * AB4500 device core funtions, for client access | ||
| 11 | */ | ||
| 12 | #ifndef MFD_AB4500_H | ||
| 13 | #define MFD_AB4500_H | ||
| 14 | |||
| 15 | #include <linux/device.h> | ||
| 16 | |||
| 17 | /* | ||
| 18 | * AB4500 bank addresses | ||
| 19 | */ | ||
| 20 | #define AB4500_SYS_CTRL1_BLOCK 0x1 | ||
| 21 | #define AB4500_SYS_CTRL2_BLOCK 0x2 | ||
| 22 | #define AB4500_REGU_CTRL1 0x3 | ||
| 23 | #define AB4500_REGU_CTRL2 0x4 | ||
| 24 | #define AB4500_USB 0x5 | ||
| 25 | #define AB4500_TVOUT 0x6 | ||
| 26 | #define AB4500_DBI 0x7 | ||
| 27 | #define AB4500_ECI_AV_ACC 0x8 | ||
| 28 | #define AB4500_RESERVED 0x9 | ||
| 29 | #define AB4500_GPADC 0xA | ||
| 30 | #define AB4500_CHARGER 0xB | ||
| 31 | #define AB4500_GAS_GAUGE 0xC | ||
| 32 | #define AB4500_AUDIO 0xD | ||
| 33 | #define AB4500_INTERRUPT 0xE | ||
| 34 | #define AB4500_RTC 0xF | ||
| 35 | #define AB4500_MISC 0x10 | ||
| 36 | #define AB4500_DEBUG 0x12 | ||
| 37 | #define AB4500_PROD_TEST 0x13 | ||
| 38 | #define AB4500_OTP_EMUL 0x15 | ||
| 39 | |||
| 40 | /* | ||
| 41 | * System control 1 register offsets. | ||
| 42 | * Bank = 0x01 | ||
| 43 | */ | ||
| 44 | #define AB4500_TURNON_STAT_REG 0x0100 | ||
| 45 | #define AB4500_RESET_STAT_REG 0x0101 | ||
| 46 | #define AB4500_PONKEY1_PRESS_STAT_REG 0x0102 | ||
| 47 | |||
| 48 | #define AB4500_FSM_STAT1_REG 0x0140 | ||
| 49 | #define AB4500_FSM_STAT2_REG 0x0141 | ||
| 50 | #define AB4500_SYSCLK_REQ_STAT_REG 0x0142 | ||
| 51 | #define AB4500_USB_STAT1_REG 0x0143 | ||
| 52 | #define AB4500_USB_STAT2_REG 0x0144 | ||
| 53 | #define AB4500_STATUS_SPARE1_REG 0x0145 | ||
| 54 | #define AB4500_STATUS_SPARE2_REG 0x0146 | ||
| 55 | |||
| 56 | #define AB4500_CTRL1_REG 0x0180 | ||
| 57 | #define AB4500_CTRL2_REG 0x0181 | ||
| 58 | |||
| 59 | /* | ||
| 60 | * System control 2 register offsets. | ||
| 61 | * bank = 0x02 | ||
| 62 | */ | ||
| 63 | #define AB4500_CTRL3_REG 0x0200 | ||
| 64 | #define AB4500_MAIN_WDOG_CTRL_REG 0x0201 | ||
| 65 | #define AB4500_MAIN_WDOG_TIMER_REG 0x0202 | ||
| 66 | #define AB4500_LOW_BAT_REG 0x0203 | ||
| 67 | #define AB4500_BATT_OK_REG 0x0204 | ||
| 68 | #define AB4500_SYSCLK_TIMER_REG 0x0205 | ||
| 69 | #define AB4500_SMPSCLK_CTRL_REG 0x0206 | ||
| 70 | #define AB4500_SMPSCLK_SEL1_REG 0x0207 | ||
| 71 | #define AB4500_SMPSCLK_SEL2_REG 0x0208 | ||
| 72 | #define AB4500_SMPSCLK_SEL3_REG 0x0209 | ||
| 73 | #define AB4500_SYSULPCLK_CONF_REG 0x020A | ||
| 74 | #define AB4500_SYSULPCLK_CTRL1_REG 0x020B | ||
| 75 | #define AB4500_SYSCLK_CTRL_REG 0x020C | ||
| 76 | #define AB4500_SYSCLK_REQ1_VALID_REG 0x020D | ||
| 77 | #define AB4500_SYSCLK_REQ_VALID_REG 0x020E | ||
| 78 | #define AB4500_SYSCTRL_SPARE_REG 0x020F | ||
| 79 | #define AB4500_PAD_CONF_REG 0x0210 | ||
| 80 | |||
| 81 | /* | ||
| 82 | * Regu control1 register offsets | ||
| 83 | * Bank = 0x03 | ||
| 84 | */ | ||
| 85 | #define AB4500_REGU_SERIAL_CTRL1_REG 0x0300 | ||
| 86 | #define AB4500_REGU_SERIAL_CTRL2_REG 0x0301 | ||
| 87 | #define AB4500_REGU_SERIAL_CTRL3_REG 0x0302 | ||
| 88 | #define AB4500_REGU_REQ_CTRL1_REG 0x0303 | ||
| 89 | #define AB4500_REGU_REQ_CTRL2_REG 0x0304 | ||
| 90 | #define AB4500_REGU_REQ_CTRL3_REG 0x0305 | ||
| 91 | #define AB4500_REGU_REQ_CTRL4_REG 0x0306 | ||
| 92 | #define AB4500_REGU_MISC1_REG 0x0380 | ||
| 93 | #define AB4500_REGU_OTGSUPPLY_CTRL_REG 0x0381 | ||
| 94 | #define AB4500_REGU_VUSB_CTRL_REG 0x0382 | ||
| 95 | #define AB4500_REGU_VAUDIO_SUPPLY_REG 0x0383 | ||
| 96 | #define AB4500_REGU_CTRL1_SPARE_REG 0x0384 | ||
| 97 | |||
| 98 | /* | ||
| 99 | * Regu control2 Vmod register offsets | ||
| 100 | */ | ||
| 101 | #define AB4500_REGU_VMOD_REGU_REG 0x0440 | ||
| 102 | #define AB4500_REGU_VMOD_SEL1_REG 0x0441 | ||
| 103 | #define AB4500_REGU_VMOD_SEL2_REG 0x0442 | ||
| 104 | #define AB4500_REGU_CTRL_DISCH_REG 0x0443 | ||
| 105 | #define AB4500_REGU_CTRL_DISCH2_REG 0x0444 | ||
| 106 | |||
| 107 | /* | ||
| 108 | * USB/ULPI register offsets | ||
| 109 | * Bank : 0x5 | ||
| 110 | */ | ||
| 111 | #define AB4500_USB_LINE_STAT_REG 0x0580 | ||
| 112 | #define AB4500_USB_LINE_CTRL1_REG 0x0581 | ||
| 113 | #define AB4500_USB_LINE_CTRL2_REG 0x0582 | ||
| 114 | #define AB4500_USB_LINE_CTRL3_REG 0x0583 | ||
| 115 | #define AB4500_USB_LINE_CTRL4_REG 0x0584 | ||
| 116 | #define AB4500_USB_LINE_CTRL5_REG 0x0585 | ||
| 117 | #define AB4500_USB_OTG_CTRL_REG 0x0587 | ||
| 118 | #define AB4500_USB_OTG_STAT_REG 0x0588 | ||
| 119 | #define AB4500_USB_OTG_STAT_REG 0x0588 | ||
| 120 | #define AB4500_USB_CTRL_SPARE_REG 0x0589 | ||
| 121 | #define AB4500_USB_PHY_CTRL_REG 0x058A | ||
| 122 | |||
| 123 | /* | ||
| 124 | * TVOUT / CTRL register offsets | ||
| 125 | * Bank : 0x06 | ||
| 126 | */ | ||
| 127 | #define AB4500_TVOUT_CTRL_REG 0x0680 | ||
| 128 | |||
| 129 | /* | ||
| 130 | * DBI register offsets | ||
| 131 | * Bank : 0x07 | ||
| 132 | */ | ||
| 133 | #define AB4500_DBI_REG1_REG 0x0700 | ||
| 134 | #define AB4500_DBI_REG2_REG 0x0701 | ||
| 135 | |||
| 136 | /* | ||
| 137 | * ECI regsiter offsets | ||
| 138 | * Bank : 0x08 | ||
| 139 | */ | ||
| 140 | #define AB4500_ECI_CTRL_REG 0x0800 | ||
| 141 | #define AB4500_ECI_HOOKLEVEL_REG 0x0801 | ||
| 142 | #define AB4500_ECI_DATAOUT_REG 0x0802 | ||
| 143 | #define AB4500_ECI_DATAIN_REG 0x0803 | ||
| 144 | |||
| 145 | /* | ||
| 146 | * AV Connector register offsets | ||
| 147 | * Bank : 0x08 | ||
| 148 | */ | ||
| 149 | #define AB4500_AV_CONN_REG 0x0840 | ||
| 150 | |||
| 151 | /* | ||
| 152 | * Accessory detection register offsets | ||
| 153 | * Bank : 0x08 | ||
| 154 | */ | ||
| 155 | #define AB4500_ACC_DET_DB1_REG 0x0880 | ||
| 156 | #define AB4500_ACC_DET_DB2_REG 0x0881 | ||
| 157 | |||
| 158 | /* | ||
| 159 | * GPADC register offsets | ||
| 160 | * Bank : 0x0A | ||
| 161 | */ | ||
| 162 | #define AB4500_GPADC_CTRL1_REG 0x0A00 | ||
| 163 | #define AB4500_GPADC_CTRL2_REG 0x0A01 | ||
| 164 | #define AB4500_GPADC_CTRL3_REG 0x0A02 | ||
| 165 | #define AB4500_GPADC_AUTO_TIMER_REG 0x0A03 | ||
| 166 | #define AB4500_GPADC_STAT_REG 0x0A04 | ||
| 167 | #define AB4500_GPADC_MANDATAL_REG 0x0A05 | ||
| 168 | #define AB4500_GPADC_MANDATAH_REG 0x0A06 | ||
| 169 | #define AB4500_GPADC_AUTODATAL_REG 0x0A07 | ||
| 170 | #define AB4500_GPADC_AUTODATAH_REG 0x0A08 | ||
| 171 | #define AB4500_GPADC_MUX_CTRL_REG 0x0A09 | ||
| 172 | |||
| 173 | /* | ||
| 174 | * Charger / status register offfsets | ||
| 175 | * Bank : 0x0B | ||
| 176 | */ | ||
| 177 | #define AB4500_CH_STATUS1_REG 0x0B00 | ||
| 178 | #define AB4500_CH_STATUS2_REG 0x0B01 | ||
| 179 | #define AB4500_CH_USBCH_STAT1_REG 0x0B02 | ||
| 180 | #define AB4500_CH_USBCH_STAT2_REG 0x0B03 | ||
| 181 | #define AB4500_CH_FSM_STAT_REG 0x0B04 | ||
| 182 | #define AB4500_CH_STAT_REG 0x0B05 | ||
| 183 | |||
| 184 | /* | ||
| 185 | * Charger / control register offfsets | ||
| 186 | * Bank : 0x0B | ||
| 187 | */ | ||
| 188 | #define AB4500_CH_VOLT_LVL_REG 0x0B40 | ||
| 189 | |||
| 190 | /* | ||
| 191 | * Charger / main control register offfsets | ||
| 192 | * Bank : 0x0B | ||
| 193 | */ | ||
| 194 | #define AB4500_MCH_CTRL1 0x0B80 | ||
| 195 | #define AB4500_MCH_CTRL2 0x0B81 | ||
| 196 | #define AB4500_MCH_IPT_CURLVL_REG 0x0B82 | ||
| 197 | #define AB4500_CH_WD_REG 0x0B83 | ||
| 198 | |||
| 199 | /* | ||
| 200 | * Charger / USB control register offsets | ||
| 201 | * Bank : 0x0B | ||
| 202 | */ | ||
| 203 | #define AB4500_USBCH_CTRL1_REG 0x0BC0 | ||
| 204 | #define AB4500_USBCH_CTRL2_REG 0x0BC1 | ||
| 205 | #define AB4500_USBCH_IPT_CRNTLVL_REG 0x0BC2 | ||
| 206 | |||
| 207 | /* | ||
| 208 | * RTC bank register offsets | ||
| 209 | * Bank : 0xF | ||
| 210 | */ | ||
| 211 | #define AB4500_RTC_SOFF_STAT_REG 0x0F00 | ||
| 212 | #define AB4500_RTC_CC_CONF_REG 0x0F01 | ||
| 213 | #define AB4500_RTC_READ_REQ_REG 0x0F02 | ||
| 214 | #define AB4500_RTC_WATCH_TSECMID_REG 0x0F03 | ||
| 215 | #define AB4500_RTC_WATCH_TSECHI_REG 0x0F04 | ||
| 216 | #define AB4500_RTC_WATCH_TMIN_LOW_REG 0x0F05 | ||
| 217 | #define AB4500_RTC_WATCH_TMIN_MID_REG 0x0F06 | ||
| 218 | #define AB4500_RTC_WATCH_TMIN_HI_REG 0x0F07 | ||
| 219 | #define AB4500_RTC_ALRM_MIN_LOW_REG 0x0F08 | ||
| 220 | #define AB4500_RTC_ALRM_MIN_MID_REG 0x0F09 | ||
| 221 | #define AB4500_RTC_ALRM_MIN_HI_REG 0x0F0A | ||
| 222 | #define AB4500_RTC_STAT_REG 0x0F0B | ||
| 223 | #define AB4500_RTC_BKUP_CHG_REG 0x0F0C | ||
| 224 | #define AB4500_RTC_FORCE_BKUP_REG 0x0F0D | ||
| 225 | #define AB4500_RTC_CALIB_REG 0x0F0E | ||
| 226 | #define AB4500_RTC_SWITCH_STAT_REG 0x0F0F | ||
| 227 | |||
| 228 | /* | ||
| 229 | * PWM Out generators | ||
| 230 | * Bank: 0x10 | ||
| 231 | */ | ||
| 232 | #define AB4500_PWM_OUT_CTRL1_REG 0x1060 | ||
| 233 | #define AB4500_PWM_OUT_CTRL2_REG 0x1061 | ||
| 234 | #define AB4500_PWM_OUT_CTRL3_REG 0x1062 | ||
| 235 | #define AB4500_PWM_OUT_CTRL4_REG 0x1063 | ||
| 236 | #define AB4500_PWM_OUT_CTRL5_REG 0x1064 | ||
| 237 | #define AB4500_PWM_OUT_CTRL6_REG 0x1065 | ||
| 238 | #define AB4500_PWM_OUT_CTRL7_REG 0x1066 | ||
| 239 | |||
| 240 | #define AB4500_I2C_PAD_CTRL_REG 0x1067 | ||
| 241 | #define AB4500_REV_REG 0x1080 | ||
| 242 | |||
| 243 | /** | ||
| 244 | * struct ab4500 | ||
| 245 | * @spi: spi device structure | ||
| 246 | * @tx_buf: transmit buffer | ||
| 247 | * @rx_buf: receive buffer | ||
| 248 | * @lock: sync primitive | ||
| 249 | */ | ||
| 250 | struct ab4500 { | ||
| 251 | struct spi_device *spi; | ||
| 252 | unsigned long tx_buf[4]; | ||
| 253 | unsigned long rx_buf[4]; | ||
| 254 | struct mutex lock; | ||
| 255 | }; | ||
| 256 | |||
| 257 | int ab4500_write(struct ab4500 *ab4500, unsigned char block, | ||
| 258 | unsigned long addr, unsigned char data); | ||
| 259 | int ab4500_read(struct ab4500 *ab4500, unsigned char block, | ||
| 260 | unsigned long addr); | ||
| 261 | |||
| 262 | #endif /* MFD_AB4500_H */ | ||
diff --git a/include/linux/mfd/ab8500.h b/include/linux/mfd/ab8500.h new file mode 100644 index 000000000000..b63ff3ba3351 --- /dev/null +++ b/include/linux/mfd/ab8500.h | |||
| @@ -0,0 +1,128 @@ | |||
| 1 | /* | ||
| 2 | * Copyright (C) ST-Ericsson SA 2010 | ||
| 3 | * | ||
| 4 | * License Terms: GNU General Public License v2 | ||
| 5 | * Author: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> | ||
| 6 | */ | ||
| 7 | #ifndef MFD_AB8500_H | ||
| 8 | #define MFD_AB8500_H | ||
| 9 | |||
| 10 | #include <linux/device.h> | ||
| 11 | |||
| 12 | /* | ||
| 13 | * Interrupts | ||
| 14 | */ | ||
| 15 | |||
| 16 | #define AB8500_INT_MAIN_EXT_CH_NOT_OK 0 | ||
| 17 | #define AB8500_INT_UN_PLUG_TV_DET 1 | ||
| 18 | #define AB8500_INT_PLUG_TV_DET 2 | ||
| 19 | #define AB8500_INT_TEMP_WARM 3 | ||
| 20 | #define AB8500_INT_PON_KEY2DB_F 4 | ||
| 21 | #define AB8500_INT_PON_KEY2DB_R 5 | ||
| 22 | #define AB8500_INT_PON_KEY1DB_F 6 | ||
| 23 | #define AB8500_INT_PON_KEY1DB_R 7 | ||
| 24 | #define AB8500_INT_BATT_OVV 8 | ||
| 25 | #define AB8500_INT_MAIN_CH_UNPLUG_DET 10 | ||
| 26 | #define AB8500_INT_MAIN_CH_PLUG_DET 11 | ||
| 27 | #define AB8500_INT_USB_ID_DET_F 12 | ||
| 28 | #define AB8500_INT_USB_ID_DET_R 13 | ||
| 29 | #define AB8500_INT_VBUS_DET_F 14 | ||
| 30 | #define AB8500_INT_VBUS_DET_R 15 | ||
| 31 | #define AB8500_INT_VBUS_CH_DROP_END 16 | ||
| 32 | #define AB8500_INT_RTC_60S 17 | ||
| 33 | #define AB8500_INT_RTC_ALARM 18 | ||
| 34 | #define AB8500_INT_BAT_CTRL_INDB 20 | ||
| 35 | #define AB8500_INT_CH_WD_EXP 21 | ||
| 36 | #define AB8500_INT_VBUS_OVV 22 | ||
| 37 | #define AB8500_INT_MAIN_CH_DROP_END 23 | ||
| 38 | #define AB8500_INT_CCN_CONV_ACC 24 | ||
| 39 | #define AB8500_INT_INT_AUD 25 | ||
| 40 | #define AB8500_INT_CCEOC 26 | ||
| 41 | #define AB8500_INT_CC_INT_CALIB 27 | ||
| 42 | #define AB8500_INT_LOW_BAT_F 28 | ||
| 43 | #define AB8500_INT_LOW_BAT_R 29 | ||
| 44 | #define AB8500_INT_BUP_CHG_NOT_OK 30 | ||
| 45 | #define AB8500_INT_BUP_CHG_OK 31 | ||
| 46 | #define AB8500_INT_GP_HW_ADC_CONV_END 32 | ||
| 47 | #define AB8500_INT_ACC_DETECT_1DB_F 33 | ||
| 48 | #define AB8500_INT_ACC_DETECT_1DB_R 34 | ||
| 49 | #define AB8500_INT_ACC_DETECT_22DB_F 35 | ||
| 50 | #define AB8500_INT_ACC_DETECT_22DB_R 36 | ||
| 51 | #define AB8500_INT_ACC_DETECT_21DB_F 37 | ||
| 52 | #define AB8500_INT_ACC_DETECT_21DB_R 38 | ||
| 53 | #define AB8500_INT_GP_SW_ADC_CONV_END 39 | ||
| 54 | #define AB8500_INT_BTEMP_LOW 72 | ||
| 55 | #define AB8500_INT_BTEMP_LOW_MEDIUM 73 | ||
| 56 | #define AB8500_INT_BTEMP_MEDIUM_HIGH 74 | ||
| 57 | #define AB8500_INT_BTEMP_HIGH 75 | ||
| 58 | #define AB8500_INT_USB_CHARGER_NOT_OK 81 | ||
| 59 | #define AB8500_INT_ID_WAKEUP_R 82 | ||
| 60 | #define AB8500_INT_ID_DET_R1R 84 | ||
| 61 | #define AB8500_INT_ID_DET_R2R 85 | ||
| 62 | #define AB8500_INT_ID_DET_R3R 86 | ||
| 63 | #define AB8500_INT_ID_DET_R4R 87 | ||
| 64 | #define AB8500_INT_ID_WAKEUP_F 88 | ||
| 65 | #define AB8500_INT_ID_DET_R1F 90 | ||
| 66 | #define AB8500_INT_ID_DET_R2F 91 | ||
| 67 | #define AB8500_INT_ID_DET_R3F 92 | ||
| 68 | #define AB8500_INT_ID_DET_R4F 93 | ||
| 69 | #define AB8500_INT_USB_CHG_DET_DONE 94 | ||
| 70 | #define AB8500_INT_USB_CH_TH_PROT_F 96 | ||
| 71 | #define AB8500_INT_USB_CH_TH_PROP_R 97 | ||
| 72 | #define AB8500_INT_MAIN_CH_TH_PROP_F 98 | ||
| 73 | #define AB8500_INT_MAIN_CH_TH_PROT_R 99 | ||
| 74 | #define AB8500_INT_USB_CHARGER_NOT_OKF 103 | ||
| 75 | |||
| 76 | #define AB8500_NR_IRQS 104 | ||
| 77 | #define AB8500_NUM_IRQ_REGS 13 | ||
| 78 | |||
| 79 | /** | ||
| 80 | * struct ab8500 - ab8500 internal structure | ||
| 81 | * @dev: parent device | ||
| 82 | * @lock: read/write operations lock | ||
| 83 | * @irq_lock: genirq bus lock | ||
| 84 | * @revision: chip revision | ||
| 85 | * @irq: irq line | ||
| 86 | * @write: register write | ||
| 87 | * @read: register read | ||
| 88 | * @rx_buf: rx buf for SPI | ||
| 89 | * @tx_buf: tx buf for SPI | ||
| 90 | * @mask: cache of IRQ regs for bus lock | ||
| 91 | * @oldmask: cache of previous IRQ regs for bus lock | ||
| 92 | */ | ||
| 93 | struct ab8500 { | ||
| 94 | struct device *dev; | ||
| 95 | struct mutex lock; | ||
| 96 | struct mutex irq_lock; | ||
| 97 | int revision; | ||
| 98 | int irq_base; | ||
| 99 | int irq; | ||
| 100 | |||
| 101 | int (*write) (struct ab8500 *a8500, u16 addr, u8 data); | ||
| 102 | int (*read) (struct ab8500 *a8500, u16 addr); | ||
| 103 | |||
| 104 | unsigned long tx_buf[4]; | ||
| 105 | unsigned long rx_buf[4]; | ||
| 106 | |||
| 107 | u8 mask[AB8500_NUM_IRQ_REGS]; | ||
| 108 | u8 oldmask[AB8500_NUM_IRQ_REGS]; | ||
| 109 | }; | ||
| 110 | |||
| 111 | /** | ||
| 112 | * struct ab8500_platform_data - AB8500 platform data | ||
| 113 | * @irq_base: start of AB8500 IRQs, AB8500_NR_IRQS will be used | ||
| 114 | * @init: board-specific initialization after detection of ab8500 | ||
| 115 | */ | ||
| 116 | struct ab8500_platform_data { | ||
| 117 | int irq_base; | ||
| 118 | void (*init) (struct ab8500 *); | ||
| 119 | }; | ||
| 120 | |||
| 121 | extern int ab8500_write(struct ab8500 *a8500, u16 addr, u8 data); | ||
| 122 | extern int ab8500_read(struct ab8500 *a8500, u16 addr); | ||
| 123 | extern int ab8500_set_bits(struct ab8500 *a8500, u16 addr, u8 mask, u8 data); | ||
| 124 | |||
| 125 | extern int __devinit ab8500_init(struct ab8500 *ab8500); | ||
| 126 | extern int __devexit ab8500_exit(struct ab8500 *ab8500); | ||
| 127 | |||
| 128 | #endif /* MFD_AB8500_H */ | ||
