aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/ata/Kconfig9
-rw-r--r--drivers/ata/Makefile1
-rw-r--r--drivers/ata/pata_it8172.c288
3 files changed, 0 insertions, 298 deletions
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index cbf0deb25033..5a8bdac5f5e8 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -288,15 +288,6 @@ config PATA_ISAPNP
288 288
289 If unsure, say N. 289 If unsure, say N.
290 290
291config PATA_IT8172
292 tristate "IT8172 PATA support (Very Experimental)"
293 depends on PCI && EXPERIMENTAL
294 help
295 This option enables support for the ITE 8172 PATA controller
296 via the new ATA layer.
297
298 If unsure, say N.
299
300config PATA_IT821X 291config PATA_IT821X
301 tristate "IT821x PATA support (Experimental)" 292 tristate "IT821x PATA support (Experimental)"
302 depends on PCI && EXPERIMENTAL 293 depends on PCI && EXPERIMENTAL
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index e42d14dbf037..72243a677f9b 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -32,7 +32,6 @@ obj-$(CONFIG_PATA_HPT37X) += pata_hpt37x.o
32obj-$(CONFIG_PATA_HPT3X2N) += pata_hpt3x2n.o 32obj-$(CONFIG_PATA_HPT3X2N) += pata_hpt3x2n.o
33obj-$(CONFIG_PATA_HPT3X3) += pata_hpt3x3.o 33obj-$(CONFIG_PATA_HPT3X3) += pata_hpt3x3.o
34obj-$(CONFIG_PATA_ISAPNP) += pata_isapnp.o 34obj-$(CONFIG_PATA_ISAPNP) += pata_isapnp.o
35obj-$(CONFIG_PATA_IT8172) += pata_it8172.o
36obj-$(CONFIG_PATA_IT821X) += pata_it821x.o 35obj-$(CONFIG_PATA_IT821X) += pata_it821x.o
37obj-$(CONFIG_PATA_JMICRON) += pata_jmicron.o 36obj-$(CONFIG_PATA_JMICRON) += pata_jmicron.o
38obj-$(CONFIG_PATA_NETCELL) += pata_netcell.o 37obj-$(CONFIG_PATA_NETCELL) += pata_netcell.o
diff --git a/drivers/ata/pata_it8172.c b/drivers/ata/pata_it8172.c
deleted file mode 100644
index 53d35bb6fcf9..000000000000
--- a/drivers/ata/pata_it8172.c
+++ /dev/null
@@ -1,288 +0,0 @@
1/*
2 * pata_it8172.c - IT8172 PATA for new ATA layer
3 * (C) 2005 Red Hat Inc
4 * Alan Cox <alan@redhat.com>
5 *
6 * Based heavily on
7 *
8 * BRIEF MODULE DESCRIPTION
9 * IT8172 IDE controller support
10 *
11 * Copyright 2000 MontaVista Software Inc.
12 * Author: MontaVista Software, Inc.
13 * stevel@mvista.com or source@mvista.com
14 *
15 * This program is free software; you can redistribute it and/or modify it
16 * under the terms of the GNU General Public License as published by the
17 * Free Software Foundation; either version 2 of the License, or (at your
18 * option) any later version.
19 *
20 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
21 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
22 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
23 * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
24 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
25 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
26 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
27 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
28 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
29 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
30 *
31 * You should have received a copy of the GNU General Public License along
32 * with this program; if not, write to the Free Software Foundation, Inc.,
33 * 675 Mass Ave, Cambridge, MA 02139, USA.
34 *
35 * TODO
36 * Check for errata
37 * See if we really need to force native mode
38 * PIO timings (also lacking in original)
39 */
40
41#include <linux/kernel.h>
42#include <linux/module.h>
43#include <linux/pci.h>
44#include <linux/init.h>
45#include <linux/blkdev.h>
46#include <linux/delay.h>
47#include <scsi/scsi_host.h>
48#include <linux/libata.h>
49
50#define DRV_NAME "pata_it8172"
51#define DRV_VERSION "0.3.1"
52
53static int it8172_pre_reset(struct ata_port *ap)
54{
55 static const struct pci_bits it8172_enable_bits[] = {
56 { 0x00, 0, 0x00, 0x00 },
57 { 0x40, 1, 0x00, 0x01 }
58 };
59
60 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
61
62 if (ap->port_no && !pci_test_config_bits(pdev, &it8172_enable_bits[ap->port_no])) {
63 ata_port_disable(ap);
64 printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
65 return 0;
66 }
67 ap->cbl = ATA_CBL_PATA40;
68 return ata_std_prereset(ap);
69}
70
71static void it8172_error_handler(struct ata_port *ap)
72{
73 ata_bmdma_drive_eh(ap, it8172_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
74}
75
76/**
77 * it8172_set_pio_timing - set initial PIO mode data
78 * @ap: ATA interface
79 * @adev: ATA device
80 *
81 * Called by both the pio and dma setup functions to set the controller
82 * timings for PIO transfers. We must load both the mode number and
83 * timing values into the controller.
84 */
85
86static void it8172_set_pio_timing(struct ata_port *ap, struct ata_device *adev, int pio)
87{
88 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
89 u16 reg40;
90
91 pci_read_config_word(pdev, 0x40, &reg40);
92
93 /*
94 * FIX! The DIOR/DIOW pulse width and recovery times in port 0x44
95 * are being left at the default values of 8 PCI clocks (242 nsec
96 * for a 33 MHz clock). These can be safely shortened at higher
97 * PIO modes. The DIOR/DIOW pulse width and recovery times only
98 * apply to PIO modes, not to the DMA modes.
99 */
100
101 /*
102 * Enable port 0x44. The IT8172G spec is confused; it calls
103 * this register the "Slave IDE Timing Register", but in fact,
104 * it controls timing for both master and slave drives.
105 */
106
107 reg40 |= 0x4000;
108 if (adev->devno) {
109 reg40 &= 0xC006;
110 if (pio > 1)
111 /* Enable prefetch and IORDY sample-point */
112 reg40 |= 0x0060;
113 } else {
114 reg40 &= 0xC060;
115 if (pio > 1)
116 /* Enable prefetch and IORDY sample-point */
117 reg40 |= 0x0006;
118 }
119 /* Write back the enables */
120 pci_write_config_word(pdev, 0x40, reg40);
121}
122
123/**
124 * it8172_set_piomode - set initial PIO mode data
125 * @ap: ATA interface
126 * @adev: ATA device
127 *
128 * Called to do the PIO mode setup. We use a shared helper for this
129 * as the DMA setup must also adjust the PIO timing information.
130 */
131
132static void it8172_set_piomode(struct ata_port *ap, struct ata_device *adev)
133{
134 it8172_set_pio_timing(ap, adev, adev->pio_mode - XFER_PIO_0);
135}
136
137/**
138 * it8172_set_dmamode - set initial DMA mode data
139 * @ap: ATA interface
140 * @adev: ATA device
141 *
142 * Called to do the DMA mode setup. We must tune an appropriate PIO
143 * mode to match.
144 */
145
146static void it8172_set_dmamode(struct ata_port *ap, struct ata_device *adev)
147{
148 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
149 int dn = (2 * ap->port_no) + adev->devno;
150 u8 reg48, reg4a;
151 int pio;
152
153 static const int pio_map[] = { 1, 3, 4};
154 /*
155 * Setting the DMA cycle time to 2 or 3 PCI clocks (60 and 91 nsec
156 * at 33 MHz PCI clock) seems to cause BadCRC errors during DMA
157 * transfers on some drives, even though both numbers meet the minimum
158 * ATAPI-4 spec of 73 and 54 nsec for UDMA 1 and 2 respectively.
159 * So the faster times are just commented out here. The good news is
160 * that the slower cycle time has very little affect on transfer
161 * performance.
162 */
163
164 pci_read_config_byte(pdev, 0x48, &reg48);
165 pci_read_config_byte(pdev, 0x4A, &reg4a);
166
167 reg4a &= ~(3 << (4 * dn));
168
169 if (adev->dma_mode >= XFER_UDMA_0) {
170 reg48 |= 1 << dn;
171#ifdef UDMA_TIMING_SET
172 reg4a |= ((adev->dma_mode - XFER_UDMA_0) << (4 * dn));
173#endif
174 pio = 4;
175 } else {
176 pio = pio_map[adev->dma_mode - XFER_MW_DMA_0];
177 reg48 &= ~ (1 << dn);
178 }
179 pci_write_config_byte(pdev, 0x48, reg48);
180 pci_write_config_byte(pdev, 0x4A, reg4a);
181 it8172_set_pio_timing(ap, adev, pio);
182
183}
184
185static struct scsi_host_template it8172_sht = {
186 .module = THIS_MODULE,
187 .name = DRV_NAME,
188 .ioctl = ata_scsi_ioctl,
189 .queuecommand = ata_scsi_queuecmd,
190 .can_queue = ATA_DEF_QUEUE,
191 .this_id = ATA_SHT_THIS_ID,
192 .sg_tablesize = LIBATA_MAX_PRD,
193 .max_sectors = ATA_MAX_SECTORS,
194 .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
195 .emulated = ATA_SHT_EMULATED,
196 .use_clustering = ATA_SHT_USE_CLUSTERING,
197 .proc_name = DRV_NAME,
198 .dma_boundary = ATA_DMA_BOUNDARY,
199 .slave_configure = ata_scsi_slave_config,
200 .bios_param = ata_std_bios_param,
201};
202
203static struct ata_port_operations it8172_port_ops = {
204 .port_disable = ata_port_disable,
205 .set_piomode = it8172_set_piomode,
206 .set_dmamode = it8172_set_dmamode,
207 .mode_filter = ata_pci_default_filter,
208
209 .tf_load = ata_tf_load,
210 .tf_read = ata_tf_read,
211 .check_status = ata_check_status,
212 .exec_command = ata_exec_command,
213 .dev_select = ata_std_dev_select,
214
215 .freeze = ata_bmdma_freeze,
216 .thaw = ata_bmdma_thaw,
217 .error_handler = it8172_error_handler,
218 .post_internal_cmd = ata_bmdma_post_internal_cmd,
219
220 .bmdma_setup = ata_bmdma_setup,
221 .bmdma_start = ata_bmdma_start,
222 .bmdma_stop = ata_bmdma_stop,
223 .bmdma_status = ata_bmdma_status,
224
225 .qc_prep = ata_qc_prep,
226 .qc_issue = ata_qc_issue_prot,
227 .eng_timeout = ata_eng_timeout,
228 .data_xfer = ata_pio_data_xfer,
229
230 .irq_handler = ata_interrupt,
231 .irq_clear = ata_bmdma_irq_clear,
232
233 .port_start = ata_port_start,
234 .port_stop = ata_port_stop,
235 .host_stop = ata_host_stop
236};
237
238static int it8172_init_one(struct pci_dev *dev, const struct pci_device_id *id)
239{
240 static struct ata_port_info info = {
241 .sht = &it8172_sht,
242 .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
243 .pio_mask = 0x1f,
244 .mwdma_mask = 0x06, /* No MWDMA0 support */
245 .udma_mask = 0x7,
246 .port_ops = &it8172_port_ops
247 };
248 static struct ata_port_info *port_info[2] = { &info, &info };
249
250 if ((!(PCI_FUNC(dev->devfn) & 1) ||
251 (!((dev->class >> 8) == PCI_CLASS_STORAGE_IDE))))
252 return -ENODEV; /* IT8172 is more than an IDE controller */
253
254 return ata_pci_init_one(dev, port_info, 2);
255}
256
257static struct pci_device_id it8172[] = {
258 { PCI_DEVICE(PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_IT8172G), },
259 { 0, },
260};
261
262static struct pci_driver it8172_pci_driver = {
263 .name = DRV_NAME,
264 .id_table = it8172,
265 .probe = it8172_init_one,
266 .remove = ata_pci_remove_one
267};
268
269static int __init it8172_init(void)
270{
271 return pci_register_driver(&it8172_pci_driver);
272}
273
274
275static void __exit it8172_exit(void)
276{
277 pci_unregister_driver(&it8172_pci_driver);
278}
279
280
281MODULE_AUTHOR("Alan Cox");
282MODULE_DESCRIPTION("low-level driver for ITE IT8172");
283MODULE_LICENSE("GPL");
284MODULE_DEVICE_TABLE(pci, it8172);
285MODULE_VERSION(DRV_VERSION);
286
287module_init(it8172_init);
288module_exit(it8172_exit);
generated by cgit v1.2.2 (git 2.25.0) at 2025-11-08 11:14:30 -0500