3 files changed, 25 insertions, 9 deletions

diff --git a/Documentation/hwmon/lm63 b/Documentation/hwmon/lm63
index 31660bf97979..b9843eab1afb 100644
--- a/Documentation/hwmon/lm63
+++ b/Documentation/hwmon/lm63
@@ -7,6 +7,11 @@ Supported chips:
     Addresses scanned: I2C 0x4c
     Datasheet: Publicly available at the National Semiconductor website
                http://www.national.com/pf/LM/LM63.html
+  * National Semiconductor LM64
+    Prefix: 'lm64'
+    Addresses scanned: I2C 0x18 and 0x4e
+    Datasheet: Publicly available at the National Semiconductor website
+               http://www.national.com/pf/LM/LM64.html
 
 Author: Jean Delvare <khali@linux-fr.org>
 
@@ -55,3 +60,5 @@ The lm63 driver will not update its values more frequently than every
 second; reading them more often will do no harm, but will return 'old'
 values.
 
+The LM64 is effectively an LM63 with GPIO lines. The driver does not
+support these GPIO lines at present.
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 6a9ac754ca5d..fa609586c7c9 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -447,13 +447,14 @@ config SENSORS_IT87
           will be called it87.
 
 config SENSORS_LM63
-        tristate "National Semiconductor LM63"
+        tristate "National Semiconductor LM63 and LM64"
         depends on I2C
         help
-          If you say yes here you get support for the National Semiconductor
-          LM63 remote diode digital temperature sensor with integrated fan
-          control.  Such chips are found on the Tyan S4882 (Thunder K8QS Pro)
-          motherboard, among others.
+          If you say yes here you get support for the National
+          Semiconductor LM63 and LM64 remote diode digital temperature
+          sensors with integrated fan control.  Such chips are found
+          on the Tyan S4882 (Thunder K8QS Pro) motherboard, among
+          others.
 
           This driver can also be built as a module.  If so, the module
           will be called lm63.
diff --git a/drivers/hwmon/lm63.c b/drivers/hwmon/lm63.c
index bf81aff7051d..776aeb3019d2 100644
--- a/drivers/hwmon/lm63.c
+++ b/drivers/hwmon/lm63.c
@@ -53,7 +53,7 @@
  * Address is fully defined internally and cannot be changed.
  */
 
-static const unsigned short normal_i2c[] = { 0x4c, I2C_CLIENT_END };
+static const unsigned short normal_i2c[] = { 0x18, 0x4c, 0x4e, I2C_CLIENT_END };
 
 /*
  * The LM63 registers
@@ -131,12 +131,15 @@ static struct lm63_data *lm63_update_device(struct device *dev);
 static int lm63_detect(struct i2c_client *client, struct i2c_board_info *info);
 static void lm63_init_client(struct i2c_client *client);
 
+enum chips { lm63, lm64 };
+
 /*
  * Driver data (common to all clients)
  */
 
 static const struct i2c_device_id lm63_id[] = {
-        { "lm63", 0 },
+        { "lm63", lm63 },
+        { "lm64", lm64 },
         { }
 };
 MODULE_DEVICE_TABLE(i2c, lm63_id);
@@ -422,6 +425,7 @@ static int lm63_detect(struct i2c_client *new_client,
         struct i2c_adapter *adapter = new_client->adapter;
         u8 man_id, chip_id, reg_config1, reg_config2;
         u8 reg_alert_status, reg_alert_mask;
+        int address = new_client->addr;
 
         if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
                 return -ENODEV;
@@ -439,7 +443,6 @@ static int lm63_detect(struct i2c_client *new_client,
                          LM63_REG_ALERT_MASK);
 
         if (man_id != 0x01 /* National Semiconductor */
-         || chip_id != 0x41 /* LM63 */
          || (reg_config1 & 0x18) != 0x00
          || (reg_config2 & 0xF8) != 0x00
          || (reg_alert_status & 0x20) != 0x00
@@ -450,7 +453,12 @@ static int lm63_detect(struct i2c_client *new_client,
                 return -ENODEV;
         }
 
-        strlcpy(info->type, "lm63", I2C_NAME_SIZE);
+        if (chip_id == 0x41 && address == 0x4c)
+                strlcpy(info->type, "lm63", I2C_NAME_SIZE);
+        else if (chip_id == 0x51 && (address == 0x18 || address == 0x4e))
+                strlcpy(info->type, "lm64", I2C_NAME_SIZE);
+        else
+                return -ENODEV;
 
         return 0;
 }