19 files changed, 569 insertions, 49 deletions

diff --git a/drivers/block/ub.c b/drivers/block/ub.c
index f73446f580df..c688c25992e4 100644
--- a/drivers/block/ub.c
+++ b/drivers/block/ub.c
@@ -536,6 +536,9 @@ static void ub_cleanup(struct ub_dev *sc)
                 kfree(lun);
         }
 
+        usb_set_intfdata(sc->intf, NULL);
+        usb_put_intf(sc->intf);
+        usb_put_dev(sc->dev);
         kfree(sc);
 }
 
@@ -2221,7 +2224,12 @@ static int ub_probe(struct usb_interface *intf,
         // sc->ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
         usb_set_intfdata(intf, sc);
         usb_get_dev(sc->dev);
-        // usb_get_intf(sc->intf);      /* Do we need this? */
+        /*
+         * Since we give the interface struct to the block level through
+         * disk->driverfs_dev, we have to pin it. Otherwise, block_uevent
+         * oopses on close after a disconnect (kernels 2.6.16 and up).
+         */
+        usb_get_intf(sc->intf);
 
         snprintf(sc->name, 12, DRV_NAME "(%d.%d)",
             sc->dev->bus->busnum, sc->dev->devnum);
@@ -2286,7 +2294,7 @@ static int ub_probe(struct usb_interface *intf,
 
 err_dev_desc:
         usb_set_intfdata(intf, NULL);
-        // usb_put_intf(sc->intf);
+        usb_put_intf(sc->intf);
         usb_put_dev(sc->dev);
         kfree(sc);
 err_core:
@@ -2461,12 +2469,6 @@ static void ub_disconnect(struct usb_interface *intf)
          * and no URBs left in transit.
          */
 
-        usb_set_intfdata(intf, NULL);
-        // usb_put_intf(sc->intf);
-        sc->intf = NULL;
-        usb_put_dev(sc->dev);
-        sc->dev = NULL;
-
         ub_put(sc);
 }
 
diff --git a/drivers/usb/atm/speedtch.c b/drivers/usb/atm/speedtch.c
index 7860c8a5800d..956b7a1e8af9 100644
--- a/drivers/usb/atm/speedtch.c
+++ b/drivers/usb/atm/speedtch.c
@@ -69,7 +69,7 @@ static const char speedtch_driver_name[] = "speedtch";
 #define RESUBMIT_DELAY          1000    /* milliseconds */
 
 #define DEFAULT_BULK_ALTSETTING 1
-#define DEFAULT_ISOC_ALTSETTING 2
+#define DEFAULT_ISOC_ALTSETTING 3
 #define DEFAULT_DL_512_FIRST    0
 #define DEFAULT_ENABLE_ISOC     0
 #define DEFAULT_SW_BUFFERING    0
diff --git a/drivers/usb/atm/usbatm.c b/drivers/usb/atm/usbatm.c
index c1211fc037d9..546249843b8e 100644
--- a/drivers/usb/atm/usbatm.c
+++ b/drivers/usb/atm/usbatm.c
@@ -99,11 +99,11 @@ static const char usbatm_driver_name[] = "usbatm";
 
 #define UDSL_MAX_RCV_URBS               16
 #define UDSL_MAX_SND_URBS               16
-#define UDSL_MAX_BUF_SIZE               64 * 1024       /* bytes */
+#define UDSL_MAX_BUF_SIZE               65536
 #define UDSL_DEFAULT_RCV_URBS           4
 #define UDSL_DEFAULT_SND_URBS           4
-#define UDSL_DEFAULT_RCV_BUF_SIZE       64 * ATM_CELL_SIZE      /* bytes */
-#define UDSL_DEFAULT_SND_BUF_SIZE       64 * ATM_CELL_SIZE      /* bytes */
+#define UDSL_DEFAULT_RCV_BUF_SIZE       3392    /* 64 * ATM_CELL_SIZE */
+#define UDSL_DEFAULT_SND_BUF_SIZE       3392    /* 64 * ATM_CELL_SIZE */
 
 #define ATM_CELL_HEADER                 (ATM_CELL_SIZE - ATM_CELL_PAYLOAD)
 
@@ -135,7 +135,7 @@ MODULE_PARM_DESC(rcv_buf_bytes,
 module_param(snd_buf_bytes, uint, S_IRUGO);
 MODULE_PARM_DESC(snd_buf_bytes,
                  "Size of the buffers used for transmission, in bytes (range: 1-"
-                 __MODULE_STRING(UDSL_MAX_SND_BUF_SIZE) ", default: "
+                 __MODULE_STRING(UDSL_MAX_BUF_SIZE) ", default: "
                  __MODULE_STRING(UDSL_DEFAULT_SND_BUF_SIZE) ")");
 
 
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index fbd938d4ea58..e2e00ba4e1e6 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1805,6 +1805,12 @@ int usb_add_hcd(struct usb_hcd *hcd,
                         USB_SPEED_FULL;
         hcd->self.root_hub = rhdev;
 
+        /* wakeup flag init defaults to "everything works" for root hubs,
+         * but drivers can override it in reset() if needed, along with
+         * recording the overall controller's system wakeup capability.
+         */
+        device_init_wakeup(&rhdev->dev, 1);
+
         /* "reset" is misnamed; its role is now one-time init. the controller
          * should already have been reset (and boot firmware kicked off etc).
          */
@@ -1813,13 +1819,6 @@ int usb_add_hcd(struct usb_hcd *hcd,
                 goto err_hcd_driver_setup;
         }
 
-        /* wakeup flag init is in transition; for now we can't rely on PCI to
-         * initialize these bits properly, so we let reset() override it.
-         * This init should _precede_ the reset() once PCI behaves.
-         */
-        device_init_wakeup(&rhdev->dev,
-                        device_can_wakeup(hcd->self.controller));
-
         /* NOTE: root hub and controller capabilities may not be the same */
         if (device_can_wakeup(hcd->self.controller)
                         && device_can_wakeup(&hcd->self.root_hub->dev))
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 0c87f73f2933..90b8d43c6b33 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1168,19 +1168,9 @@ static inline const char *plural(int n)
 static int choose_configuration(struct usb_device *udev)
 {
         int i;
-        u16 devstatus;
-        int bus_powered;
         int num_configs;
         struct usb_host_config *c, *best;
 
-        /* If this fails, assume the device is bus-powered */
-        devstatus = 0;
-        usb_get_status(udev, USB_RECIP_DEVICE, 0, &devstatus);
-        le16_to_cpus(&devstatus);
-        bus_powered = ((devstatus & (1 << USB_DEVICE_SELF_POWERED)) == 0);
-        dev_dbg(&udev->dev, "device is %s-powered\n",
-                        bus_powered ? "bus" : "self");
-
         best = NULL;
         c = udev->config;
         num_configs = udev->descriptor.bNumConfigurations;
@@ -1197,6 +1187,19 @@ static int choose_configuration(struct usb_device *udev)
                  * similar errors in their descriptors.  If the next test
                  * were allowed to execute, such configurations would always
                  * be rejected and the devices would not work as expected.
+                 * In the meantime, we run the risk of selecting a config
+                 * that requires external power at a time when that power
+                 * isn't available.  It seems to be the lesser of two evils.
+                 *
+                 * Bugzilla #6448 reports a device that appears to crash
+                 * when it receives a GET_DEVICE_STATUS request!  We don't
+                 * have any other way to tell whether a device is self-powered,
+                 * but since we don't use that information anywhere but here,
+                 * the call has been removed.
+                 *
+                 * Maybe the GET_DEVICE_STATUS call and the test below can
+                 * be reinstated when device firmwares become more reliable.
+                 * Don't hold your breath.
                  */
 #if 0
                 /* Rule out self-powered configs for a bus-powered device */
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 544f7589912f..73f5a379d9b3 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -863,7 +863,7 @@ static int ohci_restart (struct ohci_hcd *ohci)
                 i = ohci->num_ports;
                 while (i--)
                         ohci_writel (ohci, RH_PS_PSS,
-                                &ohci->regs->roothub.portstatus [temp]);
+                                &ohci->regs->roothub.portstatus [i]);
                 ohci_dbg (ohci, "restart complete\n");
         }
         return 0;
diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c
index f419bd82ab7f..435273e7c85c 100644
--- a/drivers/usb/input/hid-core.c
+++ b/drivers/usb/input/hid-core.c
@@ -1557,6 +1557,9 @@ void hid_init_reports(struct hid_device *hid)
 #define USB_VENDOR_ID_HP                0x03f0
 #define USB_DEVICE_ID_HP_USBHUB_KB      0x020c
 
+#define USB_VENDOR_ID_IBM               0x04b3
+#define USB_DEVICE_ID_IBM_USBHUB_KB     0x3005
+
 #define USB_VENDOR_ID_CREATIVELABS      0x062a
 #define USB_DEVICE_ID_CREATIVELABS_SILVERCREST  0x0201
 
@@ -1681,6 +1684,7 @@ static const struct hid_blacklist {
         { USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_USBHUB_KB, HID_QUIRK_NOGET},
         { USB_VENDOR_ID_CREATIVELABS, USB_DEVICE_ID_CREATIVELABS_SILVERCREST, HID_QUIRK_NOGET },
         { USB_VENDOR_ID_HP, USB_DEVICE_ID_HP_USBHUB_KB, HID_QUIRK_NOGET },
+        { USB_VENDOR_ID_IBM, USB_DEVICE_ID_IBM_USBHUB_KB, HID_QUIRK_NOGET },
         { USB_VENDOR_ID_TANGTOP, USB_DEVICE_ID_TANGTOP_USBPS2, HID_QUIRK_NOGET },
         { USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_DUAL_USB_JOYPAD, HID_QUIRK_NOGET | HID_QUIRK_MULTI_INPUT },
         { USB_VENDOR_ID_SILVERCREST, USB_DEVICE_ID_SILVERCREST_KB, HID_QUIRK_NOGET },
diff --git a/drivers/usb/misc/emi26.c b/drivers/usb/misc/emi26.c
index 3824df33094e..1fd9cb85f4ca 100644
--- a/drivers/usb/misc/emi26.c
+++ b/drivers/usb/misc/emi26.c
@@ -15,6 +15,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/usb.h>
+#include <linux/delay.h>
 
 #define MAX_INTEL_HEX_RECORD_LENGTH 16
 typedef struct _INTEL_HEX_RECORD
@@ -114,6 +115,7 @@ static int emi26_load_firmware (struct usb_device *dev)
 
         /* De-assert reset (let the CPU run) */
         err = emi26_set_reset(dev,0);
+        msleep(250);    /* let device settle */
 
         /* 2. We upload the FPGA firmware into the EMI
          * Note: collect up to 1023 (yes!) bytes and send them with
@@ -150,6 +152,7 @@ static int emi26_load_firmware (struct usb_device *dev)
                         goto wraperr;
                 }
         }
+        msleep(250);    /* let device settle */
 
         /* De-assert reset (let the CPU run) */
         err = emi26_set_reset(dev,0);
@@ -192,6 +195,7 @@ static int emi26_load_firmware (struct usb_device *dev)
                 err("%s - error loading firmware: error = %d", __FUNCTION__, err);
                 goto wraperr;
         }
+        msleep(250);    /* let device settle */
 
         /* return 1 to fail the driver inialization
          * and give real driver change to load */
diff --git a/drivers/usb/misc/emi62.c b/drivers/usb/misc/emi62.c
index 52fea2e08db8..fe351371f274 100644
--- a/drivers/usb/misc/emi62.c
+++ b/drivers/usb/misc/emi62.c
@@ -15,6 +15,7 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/usb.h>
+#include <linux/delay.h>
 
 #define MAX_INTEL_HEX_RECORD_LENGTH 16
 typedef struct _INTEL_HEX_RECORD
@@ -123,6 +124,7 @@ static int emi62_load_firmware (struct usb_device *dev)
 
         /* De-assert reset (let the CPU run) */
         err = emi62_set_reset(dev,0);
+        msleep(250);    /* let device settle */
 
         /* 2. We upload the FPGA firmware into the EMI
          * Note: collect up to 1023 (yes!) bytes and send them with
@@ -166,6 +168,7 @@ static int emi62_load_firmware (struct usb_device *dev)
                 err("%s - error loading firmware: error = %d", __FUNCTION__, err);
                 goto wraperr;
         }
+        msleep(250);    /* let device settle */
 
         /* 4. We put the part of the firmware that lies in the external RAM into the EZ-USB */
 
@@ -228,6 +231,7 @@ static int emi62_load_firmware (struct usb_device *dev)
                 err("%s - error loading firmware: error = %d", __FUNCTION__, err);
                 goto wraperr;
         }
+        msleep(250);    /* let device settle */
 
         kfree(buf);
 
diff --git a/drivers/usb/net/pegasus.c b/drivers/usb/net/pegasus.c
index 2deb4c01539e..7683926a1b6f 100644
--- a/drivers/usb/net/pegasus.c
+++ b/drivers/usb/net/pegasus.c
@@ -318,6 +318,8 @@ static int read_mii_word(pegasus_t * pegasus, __u8 phy, __u8 indx, __u16 * regd)
         set_register(pegasus, PhyCtrl, (indx | PHY_READ));
         for (i = 0; i < REG_TIMEOUT; i++) {
                 ret = get_registers(pegasus, PhyCtrl, 1, data);
+                if (ret == -ESHUTDOWN)
+                        goto fail;
                 if (data[0] & PHY_DONE)
                         break;
         }
@@ -326,6 +328,7 @@ static int read_mii_word(pegasus_t * pegasus, __u8 phy, __u8 indx, __u16 * regd)
                 *regd = le16_to_cpu(regdi);
                 return ret;
         }
+fail:
         if (netif_msg_drv(pegasus))
                 dev_warn(&pegasus->intf->dev, "fail %s\n", __FUNCTION__);
 
@@ -354,12 +357,15 @@ static int write_mii_word(pegasus_t * pegasus, __u8 phy, __u8 indx, __u16 regd)
         set_register(pegasus, PhyCtrl, (indx | PHY_WRITE));
         for (i = 0; i < REG_TIMEOUT; i++) {
                 ret = get_registers(pegasus, PhyCtrl, 1, data);
+                if (ret == -ESHUTDOWN)
+                        goto fail;
                 if (data[0] & PHY_DONE)
                         break;
         }
         if (i < REG_TIMEOUT)
                 return ret;
 
+fail:
         if (netif_msg_drv(pegasus))
                 dev_warn(&pegasus->intf->dev, "fail %s\n", __FUNCTION__);
         return -ETIMEDOUT;
@@ -387,6 +393,8 @@ static int read_eprom_word(pegasus_t * pegasus, __u8 index, __u16 * retdata)
                 ret = get_registers(pegasus, EpromCtrl, 1, &tmp);
                 if (tmp & EPROM_DONE)
                         break;
+                if (ret == -ESHUTDOWN)
+                        goto fail;
         }
         if (i < REG_TIMEOUT) {
                 ret = get_registers(pegasus, EpromData, 2, &retdatai);
@@ -394,6 +402,7 @@ static int read_eprom_word(pegasus_t * pegasus, __u8 index, __u16 * retdata)
                 return ret;
         }
 
+fail:
         if (netif_msg_drv(pegasus))
                 dev_warn(&pegasus->intf->dev, "fail %s\n", __FUNCTION__);
         return -ETIMEDOUT;
@@ -433,12 +442,15 @@ static int write_eprom_word(pegasus_t * pegasus, __u8 index, __u16 data)
 
         for (i = 0; i < REG_TIMEOUT; i++) {
                 ret = get_registers(pegasus, EpromCtrl, 1, &tmp);
+                if (ret == -ESHUTDOWN)
+                        goto fail;
                 if (tmp & EPROM_DONE)
                         break;
         }
         disable_eprom_write(pegasus);
         if (i < REG_TIMEOUT)
                 return ret;
+fail:
         if (netif_msg_drv(pegasus))
                 dev_warn(&pegasus->intf->dev, "fail %s\n", __FUNCTION__);
         return -ETIMEDOUT;
@@ -1378,9 +1390,8 @@ static int pegasus_suspend (struct usb_interface *intf, pm_message_t message)
         struct pegasus *pegasus = usb_get_intfdata(intf);
         
         netif_device_detach (pegasus->net);
+        cancel_delayed_work(&pegasus->carrier_check);
         if (netif_running(pegasus->net)) {
-                cancel_delayed_work(&pegasus->carrier_check);
-
                 usb_kill_urb(pegasus->rx_urb);
                 usb_kill_urb(pegasus->intr_urb);
         }
@@ -1400,10 +1411,9 @@ static int pegasus_resume (struct usb_interface *intf)
                 pegasus->intr_urb->status = 0;
                 pegasus->intr_urb->actual_length = 0;
                 intr_callback(pegasus->intr_urb, NULL);
-
-                queue_delayed_work(pegasus_workqueue, &pegasus->carrier_check,
-                                        CARRIER_CHECK_DELAY);
         }
+        queue_delayed_work(pegasus_workqueue, &pegasus->carrier_check,
+                                CARRIER_CHECK_DELAY);
         return 0;
 }
 
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index f96b73f54bf1..5c60be521561 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -71,6 +71,16 @@ config USB_SERIAL_ANYDATA
           To compile this driver as a module, choose M here: the
           module will be called anydata.
 
+config USB_SERIAL_ARK3116
+        tristate "USB ARK Micro 3116 USB Serial Driver (EXPERIMENTAL)"
+        depends on USB_SERIAL && EXPERIMENTAL
+        help
+          Say Y here if you want to use a ARK Micro 3116 USB to Serial
+          device.
+
+          To compile this driver as a module, choose M here: the
+          module will be called ark3116
+
 config USB_SERIAL_BELKIN
         tristate "USB Belkin and Peracom Single Port Serial Driver"
         depends on USB_SERIAL
diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile
index 93c21245b1af..5a0960fc9d3e 100644
--- a/drivers/usb/serial/Makefile
+++ b/drivers/usb/serial/Makefile
@@ -13,6 +13,7 @@ usbserial-objs	:= usb-serial.o generic.o bus.o $(usbserial-obj-y)
 
 obj-$(CONFIG_USB_SERIAL_AIRPRIME)               += airprime.o
 obj-$(CONFIG_USB_SERIAL_ANYDATA)                += anydata.o
+obj-$(CONFIG_USB_SERIAL_ARK3116)                += ark3116.o
 obj-$(CONFIG_USB_SERIAL_BELKIN)                 += belkin_sa.o
 obj-$(CONFIG_USB_SERIAL_CP2101)                 += cp2101.o
 obj-$(CONFIG_USB_SERIAL_CYBERJACK)              += cyberjack.o
diff --git a/drivers/usb/serial/airprime.c b/drivers/usb/serial/airprime.c
index dbf1f063098c..694b205f9b73 100644
--- a/drivers/usb/serial/airprime.c
+++ b/drivers/usb/serial/airprime.c
@@ -18,6 +18,7 @@
 static struct usb_device_id id_table [] = {
         { USB_DEVICE(0xf3d, 0x0112) },  /* AirPrime CDMA Wireless PC Card */
         { USB_DEVICE(0x1410, 0x1110) }, /* Novatel Wireless Merlin CDMA */
+        { USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless Aircard 580 */
         { },
 };
 MODULE_DEVICE_TABLE(usb, id_table);
diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
new file mode 100644
index 000000000000..8dec796222a0
--- /dev/null
+++ b/drivers/usb/serial/ark3116.c
@@ -0,0 +1,465 @@
+/*
+ * ark3116
+ * - implements a driver for the arkmicro ark3116 chipset (vendor=0x6547,
+ *   productid=0x0232) (used in a datacable called KQ-U8A)
+ *
+ * - based on code by krisfx -> thanks !!
+ *   (see http://www.linuxquestions.org/questions/showthread.php?p=2184457#post2184457)
+ *
+ *  - based on logs created by usbsnoopy
+ *
+ *  Author   : Simon Schulz [ark3116_driver<AT>auctionant.de]
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include "usb-serial.h"
+
+
+static int debug;
+
+static struct usb_device_id id_table [] = {
+        { USB_DEVICE(0x6547, 0x0232) },
+        { },
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+struct ark3116_private {
+        spinlock_t lock;
+        u8 termios_initialized;
+};
+
+static inline void ARK3116_SND(struct usb_serial *serial, int seq,
+                               __u8 request, __u8 requesttype,
+                               __u16 value, __u16 index)
+{
+        int result;
+        result = usb_control_msg(serial->dev,
+                                 usb_sndctrlpipe(serial->dev,0),
+                                 request, requesttype, value, index,
+                                 NULL,0x00, 1000);
+        dbg("%03d > ok",seq);
+}
+
+static inline void ARK3116_RCV(struct usb_serial *serial, int seq,
+                               __u8 request, __u8 requesttype,
+                               __u16 value, __u16 index, __u8 expected,
+                               char *buf)
+{
+        int result;
+        result = usb_control_msg(serial->dev,
+                              usb_rcvctrlpipe(serial->dev,0),
+                              request, requesttype, value, index,
+                              buf, 0x0000001, 1000);
+        if (result)
+                dbg("%03d < %d bytes [0x%02X]",seq, result, buf[0]);
+        else
+                dbg("%03d < 0 bytes", seq);
+}
+
+
+static inline void ARK3116_RCV_QUIET(struct usb_serial *serial,
+                                     __u8 request, __u8 requesttype,
+                                     __u16 value, __u16 index, char *buf)
+{
+        usb_control_msg(serial->dev,
+                        usb_rcvctrlpipe(serial->dev,0),
+                        request, requesttype, value, index,
+                        buf, 0x0000001, 1000);
+}
+
+
+static int ark3116_attach(struct usb_serial *serial)
+{
+        char *buf;
+        struct ark3116_private *priv;
+        int i;
+
+        for (i = 0; i < serial->num_ports; ++i) {
+                priv = kmalloc (sizeof (struct ark3116_private), GFP_KERNEL);
+                if (!priv)
+                        goto cleanup;
+                memset (priv, 0x00, sizeof (struct ark3116_private));
+                spin_lock_init(&priv->lock);
+
+                usb_set_serial_port_data(serial->port[i], priv);
+        }
+
+        buf = kmalloc(1, GFP_KERNEL);
+        if (!buf) {
+                dbg("error kmalloc -> out of mem ?");
+                goto cleanup;
+        }
+
+        /* 3 */
+        ARK3116_SND(serial, 3,0xFE,0x40,0x0008,0x0002);
+        ARK3116_SND(serial, 4,0xFE,0x40,0x0008,0x0001);
+        ARK3116_SND(serial, 5,0xFE,0x40,0x0000,0x0008);
+        ARK3116_SND(serial, 6,0xFE,0x40,0x0000,0x000B);
+
+        /* <-- seq7 */
+        ARK3116_RCV(serial, 7,0xFE,0xC0,0x0000,0x0003, 0x00, buf);
+        ARK3116_SND(serial, 8,0xFE,0x40,0x0080,0x0003);
+        ARK3116_SND(serial, 9,0xFE,0x40,0x001A,0x0000);
+        ARK3116_SND(serial,10,0xFE,0x40,0x0000,0x0001);
+        ARK3116_SND(serial,11,0xFE,0x40,0x0000,0x0003);
+
+        /* <-- seq12 */
+        ARK3116_RCV(serial,12,0xFE,0xC0,0x0000,0x0004, 0x00, buf);
+        ARK3116_SND(serial,13,0xFE,0x40,0x0000,0x0004);
+
+        /* 14 */
+        ARK3116_RCV(serial,14,0xFE,0xC0,0x0000,0x0004, 0x00, buf);
+        ARK3116_SND(serial,15,0xFE,0x40,0x0000,0x0004);
+
+        /* 16 */
+        ARK3116_RCV(serial,16,0xFE,0xC0,0x0000,0x0004, 0x00, buf);
+        /* --> seq17 */
+        ARK3116_SND(serial,17,0xFE,0x40,0x0001,0x0004);
+
+        /* <-- seq18 */
+        ARK3116_RCV(serial,18,0xFE,0xC0,0x0000,0x0004, 0x01, buf);
+
+        /* --> seq19 */
+        ARK3116_SND(serial,19,0xFE,0x40,0x0003,0x0004);
+
+
+        /* <-- seq20 */
+        /* seems like serial port status info (RTS, CTS,...) */
+        /* returns modem control line status ?! */
+        ARK3116_RCV(serial,20,0xFE,0xC0,0x0000,0x0006, 0xFF, buf);
+
+        /* set 9600 baud & do some init ?! */
+        ARK3116_SND(serial,147,0xFE,0x40,0x0083,0x0003);
+        ARK3116_SND(serial,148,0xFE,0x40,0x0038,0x0000);
+        ARK3116_SND(serial,149,0xFE,0x40,0x0001,0x0001);
+        ARK3116_SND(serial,150,0xFE,0x40,0x0003,0x0003);
+        ARK3116_RCV(serial,151,0xFE,0xC0,0x0000,0x0004,0x03, buf);
+        ARK3116_SND(serial,152,0xFE,0x40,0x0000,0x0003);
+        ARK3116_RCV(serial,153,0xFE,0xC0,0x0000,0x0003,0x00, buf);
+        ARK3116_SND(serial,154,0xFE,0x40,0x0003,0x0003);
+
+        kfree(buf);
+        return(0);
+
+cleanup:
+        for (--i; i>=0; --i)
+                usb_set_serial_port_data(serial->port[i], NULL);
+        return -ENOMEM;
+}
+
+static void ark3116_set_termios(struct usb_serial_port *port,
+                                struct termios *old_termios)
+{
+        struct usb_serial *serial = port->serial;
+        struct ark3116_private *priv = usb_get_serial_port_data(port);
+        unsigned int cflag = port->tty->termios->c_cflag;
+        unsigned long flags;
+        int baud;
+        int ark3116_baud;
+        char *buf;
+        char config;
+
+        config = 0;
+
+        dbg("%s - port %d", __FUNCTION__, port->number);
+
+        if ((!port->tty) || (!port->tty->termios)) {
+                dbg("%s - no tty structures", __FUNCTION__);
+                return;
+        }
+
+        spin_lock_irqsave(&priv->lock, flags);
+        if (!priv->termios_initialized) {
+                *(port->tty->termios) = tty_std_termios;
+                port->tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+                priv->termios_initialized = 1;
+        }
+        spin_unlock_irqrestore(&priv->lock, flags);
+
+        cflag = port->tty->termios->c_cflag;
+
+        /* check that they really want us to change something: */
+        if (old_termios) {
+                if ((cflag == old_termios->c_cflag) &&
+                    (RELEVANT_IFLAG(port->tty->termios->c_iflag) ==
+                     RELEVANT_IFLAG(old_termios->c_iflag))) {
+                        dbg("%s - nothing to change...", __FUNCTION__);
+                        return;
+                }
+        }
+
+        buf = kmalloc(1, GFP_KERNEL);
+        if (!buf) {
+                dbg("error kmalloc");
+                return;
+        }
+
+        /* set data bit count (8/7/6/5) */
+        if (cflag & CSIZE){
+                switch (cflag & CSIZE){
+                case CS5:
+                        config |= 0x00;
+                        dbg("setting CS5");
+                        break;
+                case CS6:
+                        config |= 0x01;
+                        dbg("setting CS6");
+                        break;
+                case CS7:
+                        config |= 0x02;
+                        dbg("setting CS7");
+                        break;
+                default:
+                        err ("CSIZE was set but not CS5-CS8, using CS8!");
+                case CS8:
+                        config |= 0x03;
+                        dbg("setting CS8");
+                        break;
+                }
+        }
+
+        /* set parity (NONE,EVEN,ODD) */
+        if (cflag & PARENB){
+                if (cflag & PARODD) {
+                        config |= 0x08;
+                        dbg("setting parity to ODD");
+                } else {
+                        config |= 0x18;
+                        dbg("setting parity to EVEN");
+                }
+        } else {
+                dbg("setting parity to NONE");
+        }
+
+        /* SET STOPBIT (1/2) */
+        if (cflag & CSTOPB) {
+                config |= 0x04;
+                dbg ("setting 2 stop bits");
+        } else {
+                dbg ("setting 1 stop bit");
+        }
+
+
+        /* set baudrate: */
+        baud = 0;
+        switch (cflag & CBAUD){
+                case B0:
+                        err("can't set 0baud, using 9600 instead");
+                        break;
+                case B75:       baud = 75;      break;
+                case B150:      baud = 150;     break;
+                case B300:      baud = 300;     break;
+                case B600:      baud = 600;     break;
+                case B1200:     baud = 1200;    break;
+                case B1800:     baud = 1800;    break;
+                case B2400:     baud = 2400;    break;
+                case B4800:     baud = 4800;    break;
+                case B9600:     baud = 9600;    break;
+                case B19200:    baud = 19200;   break;
+                case B38400:    baud = 38400;   break;
+                case B57600:    baud = 57600;   break;
+                case B115200:   baud = 115200;  break;
+                case B230400:   baud = 230400;  break;
+                case B460800:   baud = 460800;  break;
+                default:
+                        dbg("does not support the baudrate requested (fix it)");
+                        break;
+        }
+
+        /* set 9600 as default (if given baudrate is invalid for example) */
+        if (baud == 0)
+                baud = 9600;
+
+        /*
+         * found by try'n'error, be careful, maybe there are other options
+         * for multiplicator etc!
+         */
+        if (baud == 460800)
+                /* strange, for 460800 the formula is wrong
+                 * (dont use round(), then 9600baud is wrong) */
+                ark3116_baud = 7;
+        else
+                ark3116_baud = 3000000 / baud;
+
+        /* ? */
+        ARK3116_RCV(serial,0,0xFE,0xC0,0x0000,0x0003, 0x03, buf);
+        /* offset = buf[0]; */
+        /* offset = 0x03; */
+        /* dbg("using 0x%04X as target for 0x0003:",0x0080+offset); */
+
+
+        /* set baudrate */
+        dbg("setting baudrate to %d (->reg=%d)",baud,ark3116_baud);
+        ARK3116_SND(serial,147,0xFE,0x40,0x0083,0x0003);
+        ARK3116_SND(serial,148,0xFE,0x40,(ark3116_baud & 0x00FF)   ,0x0000);
+        ARK3116_SND(serial,149,0xFE,0x40,(ark3116_baud & 0xFF00)>>8,0x0001);
+        ARK3116_SND(serial,150,0xFE,0x40,0x0003,0x0003);
+
+        /* ? */
+        ARK3116_RCV(serial,151,0xFE,0xC0,0x0000,0x0004,0x03, buf);
+        ARK3116_SND(serial,152,0xFE,0x40,0x0000,0x0003);
+
+        /* set data bit count, stop bit count & parity: */
+        dbg("updating bit count, stop bit or parity (cfg=0x%02X)", config);
+        ARK3116_RCV(serial,153,0xFE,0xC0,0x0000,0x0003,0x00, buf);
+        ARK3116_SND(serial,154,0xFE,0x40,config,0x0003);
+
+        if (cflag & CRTSCTS)
+                dbg("CRTSCTS not supported by chipset ?!");
+
+        /* TEST ARK3116_SND(154,0xFE,0x40,0xFFFF, 0x0006); */
+
+        kfree(buf);
+        return;
+}
+
+static int ark3116_open(struct usb_serial_port *port, struct file *filp)
+{
+        struct termios tmp_termios;
+        struct usb_serial *serial = port->serial;
+        char *buf;
+        int result = 0;
+
+        dbg("%s -  port %d", __FUNCTION__, port->number);
+
+        buf = kmalloc(1, GFP_KERNEL);
+        if (!buf) {
+                dbg("error kmalloc -> out of mem ?");
+                return -ENOMEM;
+        }
+
+        result = usb_serial_generic_open(port, filp);
+        if (result)
+                return result;
+
+        /* open */
+        ARK3116_RCV(serial,111,0xFE,0xC0,0x0000,0x0003, 0x02, buf);
+
+        ARK3116_SND(serial,112,0xFE,0x40,0x0082,0x0003);
+        ARK3116_SND(serial,113,0xFE,0x40,0x001A,0x0000);
+        ARK3116_SND(serial,114,0xFE,0x40,0x0000,0x0001);
+        ARK3116_SND(serial,115,0xFE,0x40,0x0002,0x0003);
+
+        ARK3116_RCV(serial,116,0xFE,0xC0,0x0000,0x0004, 0x03, buf);
+        ARK3116_SND(serial,117,0xFE,0x40,0x0002,0x0004);
+
+        ARK3116_RCV(serial,118,0xFE,0xC0,0x0000,0x0004, 0x02, buf);
+        ARK3116_SND(serial,119,0xFE,0x40,0x0000,0x0004);
+
+        ARK3116_RCV(serial,120,0xFE,0xC0,0x0000,0x0004, 0x00, buf);
+
+        ARK3116_SND(serial,121,0xFE,0x40,0x0001,0x0004);
+
+        ARK3116_RCV(serial,122,0xFE,0xC0,0x0000,0x0004, 0x01, buf);
+
+        ARK3116_SND(serial,123,0xFE,0x40,0x0003,0x0004);
+
+        /* returns different values (control lines ?!) */
+        ARK3116_RCV(serial,124,0xFE,0xC0,0x0000,0x0006, 0xFF, buf);
+
+        /* initialise termios: */
+        if (port->tty)
+                ark3116_set_termios(port, &tmp_termios);
+
+        kfree(buf);
+
+        return result;
+
+}
+
+static int ark3116_ioctl(struct usb_serial_port *port, struct file *file,
+                         unsigned int cmd, unsigned long arg)
+{
+        dbg("ioctl not supported yet...");
+        return -ENOIOCTLCMD;
+}
+
+static int ark3116_tiocmget(struct usb_serial_port *port, struct file *file)
+{
+        struct usb_serial *serial = port->serial;
+        char *buf;
+        char temp;
+
+        /* seems like serial port status info (RTS, CTS,...) is stored
+         * in reg(?) 0x0006
+         * pcb connection point 11 = GND -> sets bit4 of response
+         * pcb connection point  7 = GND -> sets bit6 of response
+         */
+
+        buf = kmalloc(1, GFP_KERNEL);
+        if (!buf) {
+                dbg("error kmalloc");
+                return -ENOMEM;
+        }
+
+        /* read register: */
+        ARK3116_RCV_QUIET(serial,0xFE,0xC0,0x0000,0x0006,buf);
+        temp = buf[0];
+        kfree(buf);
+
+        /* i do not really know if bit4=CTS and bit6=DSR... was just a
+         * quick guess !!
+         */
+        return  (temp & (1<<4) ? TIOCM_CTS : 0) |
+                (temp & (1<<6) ? TIOCM_DSR : 0);
+}
+
+static struct usb_driver ark3116_driver = {
+        .name =         "ark3116",
+        .probe =        usb_serial_probe,
+        .disconnect =   usb_serial_disconnect,
+        .id_table =     id_table,
+};
+
+static struct usb_serial_driver ark3116_device = {
+        .driver = {
+                .owner =        THIS_MODULE,
+                .name =         "ark3116",
+        },
+        .id_table =             id_table,
+        .num_interrupt_in =     1,
+        .num_bulk_in =          1,
+        .num_bulk_out =         1,
+        .num_ports =            1,
+        .attach =               ark3116_attach,
+        .set_termios =          ark3116_set_termios,
+        .ioctl =                ark3116_ioctl,
+        .tiocmget =             ark3116_tiocmget,
+        .open =                 ark3116_open,
+};
+
+static int __init ark3116_init(void)
+{
+        int retval;
+
+        retval = usb_serial_register(&ark3116_device);
+        if (retval)
+                return retval;
+        retval = usb_register(&ark3116_driver);
+        if (retval)
+                usb_serial_deregister(&ark3116_device);
+        return retval;
+}
+
+static void __exit ark3116_exit(void)
+{
+        usb_deregister(&ark3116_driver);
+        usb_serial_deregister(&ark3116_device);
+}
+
+module_init(ark3116_init);
+module_exit(ark3116_exit);
+MODULE_LICENSE("GPL");
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug enabled or not");
+
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 82151207d814..986d7622273d 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -307,6 +307,7 @@ static struct ftdi_sio_quirk ftdi_HE_TIRA1_quirk = {
 
 
 static struct usb_device_id id_table_combined [] = {
+        { USB_DEVICE(FTDI_VID, FTDI_ACTZWAVE_PID) },
         { USB_DEVICE(FTDI_VID, FTDI_IRTRANS_PID) },
         { USB_DEVICE(FTDI_VID, FTDI_IPLUS_PID) },
         { USB_DEVICE(FTDI_VID, FTDI_SIO_PID) },
@@ -498,6 +499,7 @@ static struct usb_device_id id_table_combined [] = {
         { USB_DEVICE(FTDI_VID, FTDI_ASK_RDR400_PID) },
         { USB_DEVICE(ICOM_ID1_VID, ICOM_ID1_PID) },
         { USB_DEVICE(PAPOUCH_VID, PAPOUCH_TMU_PID) },
+        { USB_DEVICE(FTDI_VID, FTDI_ACG_HFDUAL_PID) },
         { },                                    /* Optional parameter entry */
         { }                                     /* Terminating entry */
 };
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 2c55a5ea9c99..d69a917e768f 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -32,6 +32,10 @@
 #define FTDI_NF_RIC_PID 0x0001  /* Product Id */
 
 
+/* ACT Solutions HomePro ZWave interface (http://www.act-solutions.com/HomePro.htm) */
+#define FTDI_ACTZWAVE_PID       0xF2D0
+
+
 /* www.irtrans.de device */
 #define FTDI_IRTRANS_PID 0xFC60 /* Product Id */
 
@@ -426,6 +430,11 @@
 #define PAPOUCH_VID                     0x5050  /* Vendor ID */
 #define PAPOUCH_TMU_PID                 0x0400  /* TMU USB Thermometer */
 
+/*
+ * ACG Identification Technologies GmbH products (http://www.acg.de/).
+ * Submitted by anton -at- goto10 -dot- org.
+ */
+#define FTDI_ACG_HFDUAL_PID             0xDD20  /* HF Dual ISO Reader (RFID) */
 
 /* Commands */
 #define FTDI_SIO_RESET          0 /* Reset the port */
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index 476cda107f4f..c62cc2876519 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -138,6 +138,7 @@ int usb_serial_generic_open (struct usb_serial_port *port, struct file *filp)
 
         return result;
 }
+EXPORT_SYMBOL_GPL(usb_serial_generic_open);
 
 static void generic_cleanup (struct usb_serial_port *port)
 {
diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c
index 4d40704dea2c..238033a87092 100644
--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -257,14 +257,14 @@ static int omninet_write (struct usb_serial_port *port, const unsigned char *buf
                 return (0);
         }
 
-        spin_lock(&port->lock);
-        if (port->write_urb_busy) {
-                spin_unlock(&port->lock);
+        spin_lock(&wport->lock);
+        if (wport->write_urb_busy) {
+                spin_unlock(&wport->lock);
                 dbg("%s - already writing", __FUNCTION__);
                 return 0;
         }
-        port->write_urb_busy = 1;
-        spin_unlock(&port->lock);
+        wport->write_urb_busy = 1;
+        spin_unlock(&wport->lock);
 
         count = (count > OMNINET_BULKOUTSIZE) ? OMNINET_BULKOUTSIZE : count;
 
@@ -283,7 +283,7 @@ static int omninet_write (struct usb_serial_port *port, const unsigned char *buf
         wport->write_urb->dev = serial->dev;
         result = usb_submit_urb(wport->write_urb, GFP_ATOMIC);
         if (result) {
-                port->write_urb_busy = 0;
+                wport->write_urb_busy = 0;
                 err("%s - failed submitting write urb, error %d", __FUNCTION__, result);
         } else
                 result = count;
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 071f86a59c08..9c36f0ece20f 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -189,11 +189,15 @@ static int serial_open (struct tty_struct *tty, struct file * filp)
 
         portNumber = tty->index - serial->minor;
         port = serial->port[portNumber];
-        if (!port)
-                return -ENODEV;
+        if (!port) {
+                retval = -ENODEV;
+                goto bailout_kref_put;
+        }
 
-        if (mutex_lock_interruptible(&port->mutex))
-                return -ERESTARTSYS;
+        if (mutex_lock_interruptible(&port->mutex)) {
+                retval = -ERESTARTSYS;
+                goto bailout_kref_put;
+        }
          
         ++port->open_count;
 
@@ -209,7 +213,7 @@ static int serial_open (struct tty_struct *tty, struct file * filp)
                  * safe because we are called with BKL held */
                 if (!try_module_get(serial->type->driver.owner)) {
                         retval = -ENODEV;
-                        goto bailout_kref_put;
+                        goto bailout_mutex_unlock;
                 }
 
                 /* only call the device specific open if this 
@@ -224,10 +228,11 @@ static int serial_open (struct tty_struct *tty, struct file * filp)
 
 bailout_module_put:
         module_put(serial->type->driver.owner);
-bailout_kref_put:
-        kref_put(&serial->kref, destroy_serial);
+bailout_mutex_unlock:
         port->open_count = 0;
         mutex_unlock(&port->mutex);
+bailout_kref_put:
+        kref_put(&serial->kref, destroy_serial);
         return retval;
 }