aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/arm/mach-pxa/sharpsl.h87
-rw-r--r--arch/arm/mach-pxa/sharpsl_pm.c992
-rw-r--r--drivers/video/backlight/corgi_bl.c6
-rw-r--r--include/asm-arm/arch-pxa/sharpsl.h8
4 files changed, 1092 insertions, 1 deletions
diff --git a/arch/arm/mach-pxa/sharpsl.h b/arch/arm/mach-pxa/sharpsl.h
index 3977a77aacdd..4879c0f7da72 100644
--- a/arch/arm/mach-pxa/sharpsl.h
+++ b/arch/arm/mach-pxa/sharpsl.h
@@ -32,3 +32,90 @@ void corgi_put_hsync(void);
32void spitz_put_hsync(void); 32void spitz_put_hsync(void);
33void corgi_wait_hsync(void); 33void corgi_wait_hsync(void);
34void spitz_wait_hsync(void); 34void spitz_wait_hsync(void);
35
36/*
37 * SharpSL Battery/PM Driver
38 */
39
40struct sharpsl_charger_machinfo {
41 void (*init)(void);
42 int gpio_acin;
43 int gpio_batfull;
44 int gpio_batlock;
45 int gpio_fatal;
46 int (*status_acin)(void);
47 void (*discharge)(int);
48 void (*discharge1)(int);
49 void (*charge)(int);
50 void (*chargeled)(int);
51 void (*measure_temp)(int);
52 void (*presuspend)(void);
53 void (*postsuspend)(void);
54 unsigned long (*charger_wakeup)(void);
55 int (*should_wakeup)(unsigned int resume_on_alarm);
56 int bat_levels;
57 struct battery_thresh *bat_levels_noac;
58 struct battery_thresh *bat_levels_acin;
59 int status_high_acin;
60 int status_low_acin;
61 int status_high_noac;
62 int status_low_noac;
63};
64
65struct battery_thresh {
66 int voltage;
67 int percentage;
68};
69
70struct battery_stat {
71 int ac_status; /* APM AC Present/Not Present */
72 int mainbat_status; /* APM Main Battery Status */
73 int mainbat_percent; /* Main Battery Percentage Charge */
74 int mainbat_voltage; /* Main Battery Voltage */
75};
76
77struct sharpsl_pm_status {
78 struct device *dev;
79 struct timer_list ac_timer;
80 struct timer_list chrg_full_timer;
81
82 int charge_mode;
83#define CHRG_ERROR (-1)
84#define CHRG_OFF (0)
85#define CHRG_ON (1)
86#define CHRG_DONE (2)
87
88 unsigned int flags;
89#define SHARPSL_SUSPENDED (1 << 0) /* Device is Suspended */
90#define SHARPSL_ALARM_ACTIVE (1 << 1) /* Alarm is for charging event (not user) */
91#define SHARPSL_BL_LIMIT (1 << 2) /* Backlight Intensity Limited */
92#define SHARPSL_APM_QUEUED (1 << 3) /* APM Event Queued */
93#define SHARPSL_DO_OFFLINE_CHRG (1 << 4) /* Trigger the offline charger */
94
95 int full_count;
96 unsigned long charge_start_time;
97 struct sharpsl_charger_machinfo *machinfo;
98 struct battery_stat battstat;
99};
100
101extern struct sharpsl_pm_status sharpsl_pm;
102extern struct battery_thresh spitz_battery_levels_acin[];
103extern struct battery_thresh spitz_battery_levels_noac[];
104
105#define READ_GPIO_BIT(x) (GPLR(x) & GPIO_bit(x))
106
107#define SHARPSL_LED_ERROR 2
108#define SHARPSL_LED_ON 1
109#define SHARPSL_LED_OFF 0
110
111#define CHARGE_ON() sharpsl_pm.machinfo->charge(1)
112#define CHARGE_OFF() sharpsl_pm.machinfo->charge(0)
113#define CHARGE_LED_ON() sharpsl_pm.machinfo->chargeled(SHARPSL_LED_ON)
114#define CHARGE_LED_OFF() sharpsl_pm.machinfo->chargeled(SHARPSL_LED_OFF)
115#define CHARGE_LED_ERR() sharpsl_pm.machinfo->chargeled(SHARPSL_LED_ERROR)
116#define DISCHARGE_ON() sharpsl_pm.machinfo->discharge(1)
117#define DISCHARGE_OFF() sharpsl_pm.machinfo->discharge(0)
118#define STATUS_AC_IN sharpsl_pm.machinfo->status_acin()
119#define STATUS_BATT_LOCKED READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batlock)
120#define STATUS_CHRG_FULL READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batfull)
121#define STATUS_FATAL READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_fatal)
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
new file mode 100644
index 000000000000..6c9e871c53d8
--- /dev/null
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -0,0 +1,992 @@
1/*
2 * Battery and Power Management code for the Sharp SL-C7xx and SL-Cxx00
3 * series of PDAs
4 *
5 * Copyright (c) 2004-2005 Richard Purdie
6 *
7 * Based on code written by Sharp for 2.4 kernels
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
12 *
13 */
14
15#undef DEBUG
16
17#include <linux/module.h>
18#include <linux/timer.h>
19#include <linux/init.h>
20#include <linux/kernel.h>
21#include <linux/apm_bios.h>
22#include <linux/delay.h>
23#include <linux/interrupt.h>
24#include <linux/device.h>
25
26#include <asm/hardware.h>
27#include <asm/hardware/scoop.h>
28#include <asm/mach-types.h>
29#include <asm/irq.h>
30#include <asm/apm.h>
31
32#include <asm/arch/pm.h>
33#include <asm/arch/pxa-regs.h>
34#include <asm/arch/sharpsl.h>
35#include "sharpsl.h"
36
37/*
38 * Constants
39 */
40#define SHARPSL_CHARGE_ON_TIME_INTERVAL (msecs_to_jiffies(1*60*1000)) /* 1 min */
41#define SHARPSL_CHARGE_FINISH_TIME (msecs_to_jiffies(10*60*1000)) /* 10 min */
42#define SHARPSL_BATCHK_TIME (msecs_to_jiffies(15*1000)) /* 15 sec */
43#define SHARPSL_BATCHK_TIME_SUSPEND (60*10) /* 10 min */
44#define SHARPSL_WAIT_CO_TIME 15 /* 15 sec */
45#define SHARPSL_WAIT_DISCHARGE_ON 100 /* 100 msec */
46#define SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP 10 /* 10 msec */
47#define SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT 10 /* 10 msec */
48#define SHARPSL_CHECK_BATTERY_WAIT_TIME_JKVAD 10 /* 10 msec */
49#define SHARPSL_CHARGE_WAIT_TIME 15 /* 15 msec */
50#define SHARPSL_CHARGE_CO_CHECK_TIME 5 /* 5 msec */
51#define SHARPSL_CHARGE_RETRY_CNT 1 /* eqv. 10 min */
52
53#define SHARPSL_CHARGE_ON_VOLT 0x99 /* 2.9V */
54#define SHARPSL_CHARGE_ON_TEMP 0xe0 /* 2.9V */
55#define SHARPSL_CHARGE_ON_JKVAD_HIGH 0x9b /* 6V */
56#define SHARPSL_CHARGE_ON_JKVAD_LOW 0x34 /* 2V */
57#define SHARPSL_FATAL_ACIN_VOLT 182 /* 3.45V */
58#define SHARPSL_FATAL_NOACIN_VOLT 170 /* 3.40V */
59
60struct battery_thresh spitz_battery_levels_acin[] = {
61 { 213, 100},
62 { 212, 98},
63 { 211, 95},
64 { 210, 93},
65 { 209, 90},
66 { 208, 88},
67 { 207, 85},
68 { 206, 83},
69 { 205, 80},
70 { 204, 78},
71 { 203, 75},
72 { 202, 73},
73 { 201, 70},
74 { 200, 68},
75 { 199, 65},
76 { 198, 63},
77 { 197, 60},
78 { 196, 58},
79 { 195, 55},
80 { 194, 53},
81 { 193, 50},
82 { 192, 48},
83 { 192, 45},
84 { 191, 43},
85 { 191, 40},
86 { 190, 38},
87 { 190, 35},
88 { 189, 33},
89 { 188, 30},
90 { 187, 28},
91 { 186, 25},
92 { 185, 23},
93 { 184, 20},
94 { 183, 18},
95 { 182, 15},
96 { 181, 13},
97 { 180, 10},
98 { 179, 8},
99 { 178, 5},
100 { 0, 0},
101};
102
103struct battery_thresh spitz_battery_levels_noac[] = {
104 { 213, 100},
105 { 212, 98},
106 { 211, 95},
107 { 210, 93},
108 { 209, 90},
109 { 208, 88},
110 { 207, 85},
111 { 206, 83},
112 { 205, 80},
113 { 204, 78},
114 { 203, 75},
115 { 202, 73},
116 { 201, 70},
117 { 200, 68},
118 { 199, 65},
119 { 198, 63},
120 { 197, 60},
121 { 196, 58},
122 { 195, 55},
123 { 194, 53},
124 { 193, 50},
125 { 192, 48},
126 { 191, 45},
127 { 190, 43},
128 { 189, 40},
129 { 188, 38},
130 { 187, 35},
131 { 186, 33},
132 { 185, 30},
133 { 184, 28},
134 { 183, 25},
135 { 182, 23},
136 { 181, 20},
137 { 180, 18},
138 { 179, 15},
139 { 178, 13},
140 { 177, 10},
141 { 176, 8},
142 { 175, 5},
143 { 0, 0},
144};
145
146/* MAX1111 Commands */
147#define MAXCTRL_PD0 1u << 0
148#define MAXCTRL_PD1 1u << 1
149#define MAXCTRL_SGL 1u << 2
150#define MAXCTRL_UNI 1u << 3
151#define MAXCTRL_SEL_SH 4
152#define MAXCTRL_STR 1u << 7
153
154/* MAX1111 Channel Definitions */
155#define BATT_AD 4u
156#define BATT_THM 2u
157#define JK_VAD 6u
158
159
160/*
161 * Prototypes
162 */
163static int sharpsl_read_MainBattery(void);
164static int sharpsl_off_charge_battery(void);
165static int sharpsl_check_battery(int mode);
166static int sharpsl_ac_check(void);
167static int sharpsl_fatal_check(void);
168static int sharpsl_average_value(int ad);
169static void sharpsl_average_clear(void);
170static void sharpsl_charge_toggle(void *private_);
171static void sharpsl_battery_thread(void *private_);
172
173
174/*
175 * Variables
176 */
177struct sharpsl_pm_status sharpsl_pm;
178DECLARE_WORK(toggle_charger, sharpsl_charge_toggle, NULL);
179DECLARE_WORK(sharpsl_bat, sharpsl_battery_thread, NULL);
180
181
182static int get_percentage(int voltage)
183{
184 int i = sharpsl_pm.machinfo->bat_levels - 1;
185 struct battery_thresh *thresh;
186
187 if (sharpsl_pm.charge_mode == CHRG_ON)
188 thresh=sharpsl_pm.machinfo->bat_levels_acin;
189 else
190 thresh=sharpsl_pm.machinfo->bat_levels_noac;
191
192 while (i > 0 && (voltage > thresh[i].voltage))
193 i--;
194
195 return thresh[i].percentage;
196}
197
198static int get_apm_status(int voltage)
199{
200 int low_thresh, high_thresh;
201
202 if (sharpsl_pm.charge_mode == CHRG_ON) {
203 high_thresh = sharpsl_pm.machinfo->status_high_acin;
204 low_thresh = sharpsl_pm.machinfo->status_low_acin;
205 } else {
206 high_thresh = sharpsl_pm.machinfo->status_high_noac;
207 low_thresh = sharpsl_pm.machinfo->status_low_noac;
208 }
209
210 if (voltage >= high_thresh)
211 return APM_BATTERY_STATUS_HIGH;
212 if (voltage >= low_thresh)
213 return APM_BATTERY_STATUS_LOW;
214 return APM_BATTERY_STATUS_CRITICAL;
215}
216
217void sharpsl_battery_kick(void)
218{
219 schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(125));
220}
221EXPORT_SYMBOL(sharpsl_battery_kick);
222
223
224static void sharpsl_battery_thread(void *private_)
225{
226 int voltage, percent, apm_status, i = 0;
227
228 if (!sharpsl_pm.machinfo)
229 return;
230
231 sharpsl_pm.battstat.ac_status = (!(STATUS_AC_IN) ? APM_AC_OFFLINE : APM_AC_ONLINE);
232
233 /* Corgi cannot confirm when battery fully charged so periodically kick! */
234 if (machine_is_corgi() && (sharpsl_pm.charge_mode == CHRG_ON)
235 && time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_ON_TIME_INTERVAL))
236 schedule_work(&toggle_charger);
237
238 while(1) {
239 voltage = sharpsl_read_MainBattery();
240 if (voltage > 0) break;
241 if (i++ > 5) {
242 voltage = sharpsl_pm.machinfo->bat_levels_noac[0].voltage;
243 dev_warn(sharpsl_pm.dev, "Warning: Cannot read main battery!\n");
244 break;
245 }
246 }
247
248 voltage = sharpsl_average_value(voltage);
249 apm_status = get_apm_status(voltage);
250 percent = get_percentage(voltage);
251
252 /* At low battery voltages, the voltage has a tendency to start
253 creeping back up so we try to avoid this here */
254 if ((sharpsl_pm.battstat.ac_status == APM_AC_ONLINE) || (apm_status == APM_BATTERY_STATUS_HIGH) || percent <= sharpsl_pm.battstat.mainbat_percent) {
255 sharpsl_pm.battstat.mainbat_voltage = voltage;
256 sharpsl_pm.battstat.mainbat_status = apm_status;
257 sharpsl_pm.battstat.mainbat_percent = percent;
258 }
259
260 dev_dbg(sharpsl_pm.dev, "Battery: voltage: %d, status: %d, percentage: %d, time: %d\n", voltage,
261 sharpsl_pm.battstat.mainbat_status, sharpsl_pm.battstat.mainbat_percent, jiffies);
262
263 /* If battery is low. limit backlight intensity to save power. */
264 if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
265 && ((sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_LOW) ||
266 (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL))) {
267 if (!(sharpsl_pm.flags & SHARPSL_BL_LIMIT)) {
268 corgibl_limit_intensity(1);
269 sharpsl_pm.flags |= SHARPSL_BL_LIMIT;
270 }
271 } else if (sharpsl_pm.flags & SHARPSL_BL_LIMIT) {
272 corgibl_limit_intensity(0);
273 sharpsl_pm.flags &= ~SHARPSL_BL_LIMIT;
274 }
275
276 /* Suspend if critical battery level */
277 if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
278 && (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL)
279 && !(sharpsl_pm.flags & SHARPSL_APM_QUEUED)) {
280 sharpsl_pm.flags |= SHARPSL_APM_QUEUED;
281 dev_err(sharpsl_pm.dev, "Fatal Off\n");
282 apm_queue_event(APM_CRITICAL_SUSPEND);
283 }
284
285 schedule_delayed_work(&sharpsl_bat, SHARPSL_BATCHK_TIME);
286}
287
288static void sharpsl_charge_on(void)
289{
290 dev_dbg(sharpsl_pm.dev, "Turning Charger On\n");
291
292 sharpsl_pm.full_count = 0;
293 sharpsl_pm.charge_mode = CHRG_ON;
294 schedule_delayed_work(&toggle_charger, msecs_to_jiffies(250));
295 schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(500));
296}
297
298static void sharpsl_charge_off(void)
299{
300 dev_dbg(sharpsl_pm.dev, "Turning Charger Off\n");
301
302 CHARGE_OFF();
303 CHARGE_LED_OFF();
304 sharpsl_pm.charge_mode = CHRG_OFF;
305
306 schedule_work(&sharpsl_bat);
307}
308
309static void sharpsl_charge_error(void)
310{
311 CHARGE_LED_ERR();
312 CHARGE_OFF();
313 sharpsl_pm.charge_mode = CHRG_ERROR;
314}
315
316static void sharpsl_charge_toggle(void *private_)
317{
318 dev_dbg(sharpsl_pm.dev, "Toogling Charger at time: %lx\n", jiffies);
319
320 if (STATUS_AC_IN == 0) {
321 sharpsl_charge_off();
322 return;
323 } else if ((sharpsl_check_battery(1) < 0) || (sharpsl_ac_check() < 0)) {
324 sharpsl_charge_error();
325 return;
326 }
327
328 CHARGE_LED_ON();
329 CHARGE_OFF();
330 mdelay(SHARPSL_CHARGE_WAIT_TIME);
331 CHARGE_ON();
332
333 sharpsl_pm.charge_start_time = jiffies;
334}
335
336static void sharpsl_ac_timer(unsigned long data)
337{
338 int acin = STATUS_AC_IN;
339
340 dev_dbg(sharpsl_pm.dev, "AC Status: %d\n",acin);
341
342 sharpsl_average_clear();
343 if (acin && (sharpsl_pm.charge_mode != CHRG_ON))
344 sharpsl_charge_on();
345 else if (sharpsl_pm.charge_mode == CHRG_ON)
346 sharpsl_charge_off();
347
348 schedule_work(&sharpsl_bat);
349}
350
351
352static irqreturn_t sharpsl_ac_isr(int irq, void *dev_id, struct pt_regs *fp)
353{
354 /* Delay the event slightly to debounce */
355 /* Must be a smaller delay than the chrg_full_isr below */
356 mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250));
357
358 return IRQ_HANDLED;
359}
360
361static void sharpsl_chrg_full_timer(unsigned long data)
362{
363 dev_dbg(sharpsl_pm.dev, "Charge Full at time: %lx\n", jiffies);
364
365 sharpsl_pm.full_count++;
366
367 if (STATUS_AC_IN == 0) {
368 dev_dbg(sharpsl_pm.dev, "Charge Full: AC removed - stop charging!\n");
369 if (sharpsl_pm.charge_mode == CHRG_ON)
370 sharpsl_charge_off();
371 } else if (sharpsl_pm.full_count < 2) {
372 dev_dbg(sharpsl_pm.dev, "Charge Full: Count too low\n");
373 schedule_work(&toggle_charger);
374 } else if (time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_FINISH_TIME)) {
375 dev_dbg(sharpsl_pm.dev, "Charge Full: Interrupt generated too slowly - retry.\n");
376 schedule_work(&toggle_charger);
377 } else {
378 sharpsl_charge_off();
379 sharpsl_pm.charge_mode = CHRG_DONE;
380 dev_dbg(sharpsl_pm.dev, "Charge Full: Charging Finished\n");
381 }
382}
383
384/* Charging Finished Interrupt (Not present on Corgi) */
385/* Can trigger at the same time as an AC staus change so
386 delay until after that has been processed */
387static irqreturn_t sharpsl_chrg_full_isr(int irq, void *dev_id, struct pt_regs *fp)
388{
389 if (sharpsl_pm.flags & SHARPSL_SUSPENDED)
390 return IRQ_HANDLED;
391
392 /* delay until after any ac interrupt */
393 mod_timer(&sharpsl_pm.chrg_full_timer, jiffies + msecs_to_jiffies(500));
394
395 return IRQ_HANDLED;
396}
397
398static irqreturn_t sharpsl_fatal_isr(int irq, void *dev_id, struct pt_regs *fp)
399{
400 int is_fatal = 0;
401
402 if (STATUS_BATT_LOCKED == 0) {
403 dev_err(sharpsl_pm.dev, "Battery now Unlocked! Suspending.\n");
404 is_fatal = 1;
405 }
406
407 if (sharpsl_pm.machinfo->gpio_fatal && (STATUS_FATAL == 0)) {
408 dev_err(sharpsl_pm.dev, "Fatal Batt Error! Suspending.\n");
409 is_fatal = 1;
410 }
411
412 if (!(sharpsl_pm.flags & SHARPSL_APM_QUEUED) && is_fatal) {
413 sharpsl_pm.flags |= SHARPSL_APM_QUEUED;
414 apm_queue_event(APM_CRITICAL_SUSPEND);
415 }
416
417 return IRQ_HANDLED;
418}
419
420/*
421 * Maintain an average of the last 10 readings
422 */
423#define SHARPSL_CNV_VALUE_NUM 10
424static int sharpsl_ad_index;
425
426static void sharpsl_average_clear(void)
427{
428 sharpsl_ad_index = 0;
429}
430
431static int sharpsl_average_value(int ad)
432{
433 int i, ad_val = 0;
434 static int sharpsl_ad[SHARPSL_CNV_VALUE_NUM+1];
435
436 if (sharpsl_pm.battstat.mainbat_status != APM_BATTERY_STATUS_HIGH) {
437 sharpsl_ad_index = 0;
438 return ad;
439 }
440
441 sharpsl_ad[sharpsl_ad_index] = ad;
442 sharpsl_ad_index++;
443 if (sharpsl_ad_index >= SHARPSL_CNV_VALUE_NUM) {
444 for (i=0; i < (SHARPSL_CNV_VALUE_NUM-1); i++)
445 sharpsl_ad[i] = sharpsl_ad[i+1];
446 sharpsl_ad_index = SHARPSL_CNV_VALUE_NUM - 1;
447 }
448 for (i=0; i < sharpsl_ad_index; i++)
449 ad_val += sharpsl_ad[i];
450
451 return (ad_val / sharpsl_ad_index);
452}
453
454
455/*
456 * Read MAX1111 ADC
457 */
458static int read_max1111(int channel)
459{
460 return corgi_ssp_max1111_get((channel << MAXCTRL_SEL_SH) | MAXCTRL_PD0 | MAXCTRL_PD1
461 | MAXCTRL_SGL | MAXCTRL_UNI | MAXCTRL_STR);
462}
463
464static int sharpsl_read_MainBattery(void)
465{
466 return read_max1111(BATT_AD);
467}
468
469static int sharpsl_read_Temp(void)
470{
471 int temp;
472
473 sharpsl_pm.machinfo->measure_temp(1);
474
475 mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
476 temp = read_max1111(BATT_THM);
477
478 sharpsl_pm.machinfo->measure_temp(0);
479
480 return temp;
481}
482
483static int sharpsl_read_jkvad(void)
484{
485 return read_max1111(JK_VAD);
486}
487
488/*
489 * Take an array of 5 integers, remove the maximum and minimum values
490 * and return the average.
491 */
492static int get_select_val(int *val)
493{
494 int i, j, k, temp, sum = 0;
495
496 /* Find MAX val */
497 temp = val[0];
498 j=0;
499 for (i=1; i<5; i++) {
500 if (temp < val[i]) {
501 temp = val[i];
502 j = i;
503 }
504 }
505
506 /* Find MIN val */
507 temp = val[4];
508 k=4;
509 for (i=3; i>=0; i--) {
510 if (temp > val[i]) {
511 temp = val[i];
512 k = i;
513 }
514 }
515
516 for (i=0; i<5; i++)
517 if (i != j && i != k )
518 sum += val[i];
519
520 dev_dbg(sharpsl_pm.dev, "Average: %d from values: %d, %d, %d, %d, %d\n", sum/3, val[0], val[1], val[2], val[3], val[4]);
521
522 return (sum/3);
523}
524
525/* mode 0 - Check temperature and voltage
526 * 1 - Check temperature only */
527static int sharpsl_check_battery(int mode)
528{
529 int val, i, buff[5];
530
531 /* Check battery temperature */
532 for (i=0; i<5; i++) {
533 mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
534 buff[i] = sharpsl_read_Temp();
535 }
536
537 val = get_select_val(buff);
538
539 dev_dbg(sharpsl_pm.dev, "Temperature: %d\n", val);
540 if (val > SHARPSL_CHARGE_ON_TEMP)
541 return -1;
542 if (mode == 1)
543 return 0;
544
545 /* disable charge, enable discharge */
546 CHARGE_OFF();
547 DISCHARGE_ON();
548 mdelay(SHARPSL_WAIT_DISCHARGE_ON);
549
550 if (sharpsl_pm.machinfo->discharge1)
551 sharpsl_pm.machinfo->discharge1(1);
552
553 /* Check battery voltage */
554 for (i=0; i<5; i++) {
555 buff[i] = sharpsl_read_MainBattery();
556 mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
557 }
558
559 if (sharpsl_pm.machinfo->discharge1)
560 sharpsl_pm.machinfo->discharge1(0);
561
562 DISCHARGE_OFF();
563
564 val = get_select_val(buff);
565 dev_dbg(sharpsl_pm.dev, "Battery Voltage: %d\n", val);
566
567 if (val < SHARPSL_CHARGE_ON_VOLT)
568 return -1;
569
570 return 0;
571}
572
573static int sharpsl_ac_check(void)
574{
575 int temp, i, buff[5];
576
577 for (i=0; i<5; i++) {
578 buff[i] = sharpsl_read_jkvad();
579 mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_JKVAD);
580 }
581
582 temp = get_select_val(buff);
583 dev_dbg(sharpsl_pm.dev, "AC Voltage: %d\n",temp);
584
585 if ((temp > SHARPSL_CHARGE_ON_JKVAD_HIGH) || (temp < SHARPSL_CHARGE_ON_JKVAD_LOW)) {
586 dev_err(sharpsl_pm.dev, "Error: AC check failed.\n");
587 return -1;
588 }
589
590 return 0;
591}
592
593#ifdef CONFIG_PM
594static int sharpsl_pm_suspend(struct device *dev, pm_message_t state)
595{
596 sharpsl_pm.flags |= SHARPSL_SUSPENDED;
597 flush_scheduled_work();
598
599 if (sharpsl_pm.charge_mode == CHRG_ON)
600 sharpsl_pm.flags |= SHARPSL_DO_OFFLINE_CHRG;
601 else
602 sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG;
603
604 return 0;
605}
606
607static int sharpsl_pm_resume(struct device *dev)
608{
609 /* Clear the reset source indicators as they break the bootloader upon reboot */
610 RCSR = 0x0f;
611 sharpsl_average_clear();
612 sharpsl_pm.flags &= ~SHARPSL_APM_QUEUED;
613 sharpsl_pm.flags &= ~SHARPSL_SUSPENDED;
614
615 return 0;
616}
617
618static void corgi_goto_sleep(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
619{
620 dev_dbg(sharpsl_pm.dev, "Time is: %08x\n",RCNR);
621
622 dev_dbg(sharpsl_pm.dev, "Offline Charge Activate = %d\n",sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG);
623 /* not charging and AC-IN! */
624
625 if ((sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG) && (STATUS_AC_IN != 0)) {
626 dev_dbg(sharpsl_pm.dev, "Activating Offline Charger...\n");
627 sharpsl_pm.charge_mode = CHRG_OFF;
628 sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG;
629 sharpsl_off_charge_battery();
630 }
631
632 sharpsl_pm.machinfo->presuspend();
633
634 PEDR = 0xffffffff; /* clear it */
635
636 sharpsl_pm.flags &= ~SHARPSL_ALARM_ACTIVE;
637 if ((sharpsl_pm.charge_mode == CHRG_ON) && ((alarm_enable && ((alarm_time - RCNR) > (SHARPSL_BATCHK_TIME_SUSPEND + 30))) || !alarm_enable)) {
638 RTSR &= RTSR_ALE;
639 RTAR = RCNR + SHARPSL_BATCHK_TIME_SUSPEND;
640 dev_dbg(sharpsl_pm.dev, "Charging alarm at: %08x\n",RTAR);
641 sharpsl_pm.flags |= SHARPSL_ALARM_ACTIVE;
642 } else if (alarm_enable) {
643 RTSR &= RTSR_ALE;
644 RTAR = alarm_time;
645 dev_dbg(sharpsl_pm.dev, "User alarm at: %08x\n",RTAR);
646 } else {
647 dev_dbg(sharpsl_pm.dev, "No alarms set.\n");
648 }
649
650 pxa_pm_enter(state);
651
652 sharpsl_pm.machinfo->postsuspend();
653
654 dev_dbg(sharpsl_pm.dev, "Corgi woken up from suspend: %08x\n",PEDR);
655}
656
657static int corgi_enter_suspend(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
658{
659 if (!sharpsl_pm.machinfo->should_wakeup(!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE) && alarm_enable) )
660 {
661 if (!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE)) {
662 dev_dbg(sharpsl_pm.dev, "No user triggered wakeup events and not charging. Strange. Suspend.\n");
663 corgi_goto_sleep(alarm_time, alarm_enable, state);
664 return 1;
665 }
666 if(sharpsl_off_charge_battery()) {
667 dev_dbg(sharpsl_pm.dev, "Charging. Suspend...\n");
668 corgi_goto_sleep(alarm_time, alarm_enable, state);
669 return 1;
670 }
671 dev_dbg(sharpsl_pm.dev, "User triggered wakeup in offline charger.\n");
672 }
673
674 if ((STATUS_BATT_LOCKED == 0) || (sharpsl_fatal_check() < 0) )
675 {
676 dev_err(sharpsl_pm.dev, "Fatal condition. Suspend.\n");
677 corgi_goto_sleep(alarm_time, alarm_enable, state);
678 return 1;
679 }
680
681 return 0;
682}
683
684static int corgi_pxa_pm_enter(suspend_state_t state)
685{
686 unsigned long alarm_time = RTAR;
687 unsigned int alarm_status = ((RTSR & RTSR_ALE) != 0);
688
689 dev_dbg(sharpsl_pm.dev, "SharpSL suspending for first time.\n");
690
691 corgi_goto_sleep(alarm_time, alarm_status, state);
692
693 while (corgi_enter_suspend(alarm_time,alarm_status,state))
694 {}
695
696 dev_dbg(sharpsl_pm.dev, "SharpSL resuming...\n");
697
698 return 0;
699}
700#endif
701
702
703/*
704 * Check for fatal battery errors
705 * Fatal returns -1
706 */
707static int sharpsl_fatal_check(void)
708{
709 int buff[5], temp, i, acin;
710
711 dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check entered\n");
712
713 /* Check AC-Adapter */
714 acin = STATUS_AC_IN;
715
716 if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) {
717 CHARGE_OFF();
718 udelay(100);
719 DISCHARGE_ON(); /* enable discharge */
720 mdelay(SHARPSL_WAIT_DISCHARGE_ON);
721 }
722
723 if (sharpsl_pm.machinfo->discharge1)
724 sharpsl_pm.machinfo->discharge1(1);
725
726 /* Check battery : check inserting battery ? */
727 for (i=0; i<5; i++) {
728 buff[i] = sharpsl_read_MainBattery();
729 mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
730 }
731
732 if (sharpsl_pm.machinfo->discharge1)
733 sharpsl_pm.machinfo->discharge1(0);
734
735 if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) {
736 udelay(100);
737 CHARGE_ON();
738 DISCHARGE_OFF();
739 }
740
741 temp = get_select_val(buff);
742 dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check: acin: %d, discharge voltage: %d, no discharge: %d\n", acin, temp, sharpsl_read_MainBattery());
743
744 if ((acin && (temp < SHARPSL_FATAL_ACIN_VOLT)) ||
745 (!acin && (temp < SHARPSL_FATAL_NOACIN_VOLT)))
746 return -1;
747 return 0;
748}
749
750static int sharpsl_off_charge_error(void)
751{
752 dev_err(sharpsl_pm.dev, "Offline Charger: Error occured.\n");
753 CHARGE_OFF();
754 CHARGE_LED_ERR();
755 sharpsl_pm.charge_mode = CHRG_ERROR;
756 return 1;
757}
758
759/*
760 * Charging Control while suspended
761 * Return 1 - go straight to sleep
762 * Return 0 - sleep or wakeup depending on other factors
763 */
764static int sharpsl_off_charge_battery(void)
765{
766 int time;
767
768 dev_dbg(sharpsl_pm.dev, "Charge Mode: %d\n", sharpsl_pm.charge_mode);
769
770 if (sharpsl_pm.charge_mode == CHRG_OFF) {
771 dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 1\n");
772
773 /* AC Check */
774 if ((sharpsl_ac_check() < 0) || (sharpsl_check_battery(1) < 0))
775 return sharpsl_off_charge_error();
776
777 /* Start Charging */
778 CHARGE_LED_ON();
779 CHARGE_OFF();
780 mdelay(SHARPSL_CHARGE_WAIT_TIME);
781 CHARGE_ON();
782
783 sharpsl_pm.charge_mode = CHRG_ON;
784 sharpsl_pm.full_count = 0;
785
786 return 1;
787 } else if (sharpsl_pm.charge_mode != CHRG_ON) {
788 return 1;
789 }
790
791 if (sharpsl_pm.full_count == 0) {
792 int time;
793
794 dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 2\n");
795
796 if (sharpsl_check_battery(0) < 0)
797 return sharpsl_off_charge_error();
798
799 CHARGE_OFF();
800 mdelay(SHARPSL_CHARGE_WAIT_TIME);
801 CHARGE_ON();
802 sharpsl_pm.charge_mode = CHRG_ON;
803
804 mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
805
806 time = RCNR;
807 while(1) {
808 /* Check if any wakeup event had occured */
809 if (sharpsl_pm.machinfo->charger_wakeup() != 0)
810 return 0;
811 /* Check for timeout */
812 if ((RCNR - time) > SHARPSL_WAIT_CO_TIME)
813 return 1;
814 if (STATUS_CHRG_FULL) {
815 dev_dbg(sharpsl_pm.dev, "Offline Charger: Charge full occured. Retrying to check\n");
816 sharpsl_pm.full_count++;
817 CHARGE_OFF();
818 mdelay(SHARPSL_CHARGE_WAIT_TIME);
819 CHARGE_ON();
820 return 1;
821 }
822 }
823 }
824
825 dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 3\n");
826
827 mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
828
829 time = RCNR;
830 while(1) {
831 /* Check if any wakeup event had occured */
832 if (sharpsl_pm.machinfo->charger_wakeup() != 0)
833 return 0;
834 /* Check for timeout */
835 if ((RCNR-time) > SHARPSL_WAIT_CO_TIME) {
836 if (sharpsl_pm.full_count > SHARPSL_CHARGE_RETRY_CNT) {
837 dev_dbg(sharpsl_pm.dev, "Offline Charger: Not charged sufficiently. Retrying.\n");
838 sharpsl_pm.full_count = 0;
839 }
840 sharpsl_pm.full_count++;
841 return 1;
842 }
843 if (STATUS_CHRG_FULL) {
844 dev_dbg(sharpsl_pm.dev, "Offline Charger: Charging complete.\n");
845 CHARGE_LED_OFF();
846 CHARGE_OFF();
847 sharpsl_pm.charge_mode = CHRG_DONE;
848 return 1;
849 }
850 }
851}
852
853
854static ssize_t battery_percentage_show(struct device *dev, struct device_attribute *attr, char *buf)
855{
856 return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_percent);
857}
858
859static ssize_t battery_voltage_show(struct device *dev, struct device_attribute *attr, char *buf)
860{
861 return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_voltage);
862}
863
864static DEVICE_ATTR(battery_percentage, 0444, battery_percentage_show, NULL);
865static DEVICE_ATTR(battery_voltage, 0444, battery_voltage_show, NULL);
866
867extern void (*apm_get_power_status)(struct apm_power_info *);
868
869static void sharpsl_apm_get_power_status(struct apm_power_info *info)
870{
871 info->ac_line_status = sharpsl_pm.battstat.ac_status;
872
873 if (sharpsl_pm.charge_mode == CHRG_ON)
874 info->battery_status = APM_BATTERY_STATUS_CHARGING;
875 else
876 info->battery_status = sharpsl_pm.battstat.mainbat_status;
877
878 info->battery_flag = (1 << info->battery_status);
879 info->battery_life = sharpsl_pm.battstat.mainbat_percent;
880}
881
882static struct pm_ops sharpsl_pm_ops = {
883 .pm_disk_mode = PM_DISK_FIRMWARE,
884 .prepare = pxa_pm_prepare,
885 .enter = corgi_pxa_pm_enter,
886 .finish = pxa_pm_finish,
887};
888
889static int __init sharpsl_pm_probe(struct device *dev)
890{
891 if (!dev->platform_data)
892 return -EINVAL;
893
894 sharpsl_pm.dev = dev;
895 sharpsl_pm.machinfo = dev->platform_data;
896 sharpsl_pm.charge_mode = CHRG_OFF;
897 sharpsl_pm.flags = 0;
898
899 sharpsl_pm.machinfo->init();
900
901 init_timer(&sharpsl_pm.ac_timer);
902 sharpsl_pm.ac_timer.function = sharpsl_ac_timer;
903
904 init_timer(&sharpsl_pm.chrg_full_timer);
905 sharpsl_pm.chrg_full_timer.function = sharpsl_chrg_full_timer;
906
907 pxa_gpio_mode(sharpsl_pm.machinfo->gpio_acin | GPIO_IN);
908 pxa_gpio_mode(sharpsl_pm.machinfo->gpio_batfull | GPIO_IN);
909 pxa_gpio_mode(sharpsl_pm.machinfo->gpio_batlock | GPIO_IN);
910
911 /* Register interrupt handlers */
912 if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr, SA_INTERRUPT, "AC Input Detect", sharpsl_ac_isr)) {
913 dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin));
914 }
915 else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin),IRQT_BOTHEDGE);
916
917 if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr, SA_INTERRUPT, "Battery Cover", sharpsl_fatal_isr)) {
918 dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock));
919 }
920 else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock),IRQT_FALLING);
921
922 if (sharpsl_pm.machinfo->gpio_fatal) {
923 if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr, SA_INTERRUPT, "Fatal Battery", sharpsl_fatal_isr)) {
924 dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal));
925 }
926 else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal),IRQT_FALLING);
927 }
928
929 if (!machine_is_corgi())
930 {
931 /* Register interrupt handler. */
932 if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, SA_INTERRUPT, "CO", sharpsl_chrg_full_isr)) {
933 dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull));
934 }
935 else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull),IRQT_RISING);
936 }
937
938 device_create_file(dev, &dev_attr_battery_percentage);
939 device_create_file(dev, &dev_attr_battery_voltage);
940
941 apm_get_power_status = sharpsl_apm_get_power_status;
942
943 pm_set_ops(&sharpsl_pm_ops);
944
945 mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250));
946
947 return 0;
948}
949
950static int sharpsl_pm_remove(struct device *dev)
951{
952 pm_set_ops(NULL);
953
954 device_remove_file(dev, &dev_attr_battery_percentage);
955 device_remove_file(dev, &dev_attr_battery_voltage);
956
957 free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr);
958 free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr);
959
960 if (sharpsl_pm.machinfo->gpio_fatal)
961 free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr);
962
963 if (!machine_is_corgi())
964 free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr);
965
966 del_timer_sync(&sharpsl_pm.chrg_full_timer);
967 del_timer_sync(&sharpsl_pm.ac_timer);
968
969 return 0;
970}
971
972static struct device_driver sharpsl_pm_driver = {
973 .name = "sharpsl-pm",
974 .bus = &platform_bus_type,
975 .probe = sharpsl_pm_probe,
976 .remove = sharpsl_pm_remove,
977 .suspend = sharpsl_pm_suspend,
978 .resume = sharpsl_pm_resume,
979};
980
981static int __devinit sharpsl_pm_init(void)
982{
983 return driver_register(&sharpsl_pm_driver);
984}
985
986static void sharpsl_pm_exit(void)
987{
988 driver_unregister(&sharpsl_pm_driver);
989}
990
991late_initcall(sharpsl_pm_init);
992module_exit(sharpsl_pm_exit);
diff --git a/drivers/video/backlight/corgi_bl.c b/drivers/video/backlight/corgi_bl.c
index 4867498f68e8..bd9a6996aee7 100644
--- a/drivers/video/backlight/corgi_bl.c
+++ b/drivers/video/backlight/corgi_bl.c
@@ -48,6 +48,12 @@ static void corgibl_send_intensity(int intensity)
48 corgibl_mach_set_intensity(intensity); 48 corgibl_mach_set_intensity(intensity);
49 49
50 spin_unlock_irqrestore(&bl_lock, flags); 50 spin_unlock_irqrestore(&bl_lock, flags);
51
52 corgi_kick_batt = symbol_get(sharpsl_battery_kick);
53 if (corgi_kick_batt) {
54 corgi_kick_batt();
55 symbol_put(sharpsl_battery_kick);
56 }
51} 57}
52 58
53static void corgibl_blank(int blank) 59static void corgibl_blank(int blank)
diff --git a/include/asm-arm/arch-pxa/sharpsl.h b/include/asm-arm/arch-pxa/sharpsl.h
index 311f2bb5386a..0b43495d24b4 100644
--- a/include/asm-arm/arch-pxa/sharpsl.h
+++ b/include/asm-arm/arch-pxa/sharpsl.h
@@ -21,12 +21,18 @@ struct corgits_machinfo {
21 void (*wait_hsync)(void); 21 void (*wait_hsync)(void);
22}; 22};
23 23
24
24/* 25/*
25 * SharpSL Backlight 26 * SharpSL Backlight
26 */ 27 */
27
28struct corgibl_machinfo { 28struct corgibl_machinfo {
29 int max_intensity; 29 int max_intensity;
30 void (*set_bl_intensity)(int intensity); 30 void (*set_bl_intensity)(int intensity);
31}; 31};
32extern void corgibl_limit_intensity(int limit);
33
32 34
35/*
36 * SharpSL Battery/PM Driver
37 */
38extern void sharpsl_battery_kick(void);
generated by cgit v1.2.2 (git 2.25.0) at 2025-11-14 15:55:10 -0500