1 files changed, 104 insertions, 102 deletions

diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 17414e299482..ed9ebe59178b 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -97,114 +97,14 @@ ENTRY(stext)
          */
         ldr     r13, =__mmap_switched           @ address to jump to after
                                                 @ mmu has been enabled
-        adr     lr, BSYM(__enable_mmu)          @ return (PIC) address
+        adr     lr, BSYM(1f)                    @ return (PIC) address
  ARM(   add     pc, r10, #PROCINFO_INITFUNC     )
  THUMB( add     r12, r10, #PROCINFO_INITFUNC    )
  THUMB( mov     pc, r12                         )
+1:      b       __enable_mmu
 ENDPROC(stext)
         .ltorg
 
-#if defined(CONFIG_SMP)
-ENTRY(secondary_startup)
-        /*
-         * Common entry point for secondary CPUs.
-         *
-         * Ensure that we're in SVC mode, and IRQs are disabled.  Lookup
-         * the processor type - there is no need to check the machine type
-         * as it has already been validated by the primary processor.
-         */
-        setmode PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9
-        mrc     p15, 0, r9, c0, c0              @ get processor id
-        bl      __lookup_processor_type
-        movs    r10, r5                         @ invalid processor?
-        moveq   r0, #'p'                        @ yes, error 'p'
-        beq     __error
-
-        /*
-         * Use the page tables supplied from  __cpu_up.
-         */
-        adr     r4, __secondary_data
-        ldmia   r4, {r5, r7, r12}               @ address to jump to after
-        sub     r4, r4, r5                      @ mmu has been enabled
-        ldr     r4, [r7, r4]                    @ get secondary_data.pgdir
-        adr     lr, BSYM(__enable_mmu)          @ return address
-        mov     r13, r12                        @ __secondary_switched address
- ARM(   add     pc, r10, #PROCINFO_INITFUNC     ) @ initialise processor
-                                                  @ (return control reg)
- THUMB( add     r12, r10, #PROCINFO_INITFUNC    )
- THUMB( mov     pc, r12                         )
-ENDPROC(secondary_startup)
-
-        /*
-         * r6  = &secondary_data
-         */
-ENTRY(__secondary_switched)
-        ldr     sp, [r7, #4]                    @ get secondary_data.stack
-        mov     fp, #0
-        b       secondary_start_kernel
-ENDPROC(__secondary_switched)
-
-        .type   __secondary_data, %object
-__secondary_data:
-        .long   .
-        .long   secondary_data
-        .long   __secondary_switched
-#endif /* defined(CONFIG_SMP) */
-
-
-
-/*
- * Setup common bits before finally enabling the MMU.  Essentially
- * this is just loading the page table pointer and domain access
- * registers.
- */
-__enable_mmu:
-#ifdef CONFIG_ALIGNMENT_TRAP
-        orr     r0, r0, #CR_A
-#else
-        bic     r0, r0, #CR_A
-#endif
-#ifdef CONFIG_CPU_DCACHE_DISABLE
-        bic     r0, r0, #CR_C
-#endif
-#ifdef CONFIG_CPU_BPREDICT_DISABLE
-        bic     r0, r0, #CR_Z
-#endif
-#ifdef CONFIG_CPU_ICACHE_DISABLE
-        bic     r0, r0, #CR_I
-#endif
-        mov     r5, #(domain_val(DOMAIN_USER, DOMAIN_MANAGER) | \
-                      domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) | \
-                      domain_val(DOMAIN_TABLE, DOMAIN_MANAGER) | \
-                      domain_val(DOMAIN_IO, DOMAIN_CLIENT))
-        mcr     p15, 0, r5, c3, c0, 0           @ load domain access register
-        mcr     p15, 0, r4, c2, c0, 0           @ load page table pointer
-        b       __turn_mmu_on
-ENDPROC(__enable_mmu)
-
-/*
- * Enable the MMU.  This completely changes the structure of the visible
- * memory space.  You will not be able to trace execution through this.
- * If you have an enquiry about this, *please* check the linux-arm-kernel
- * mailing list archives BEFORE sending another post to the list.
- *
- *  r0  = cp#15 control register
- *  r13 = *virtual* address to jump to upon completion
- *
- * other registers depend on the function called upon completion
- */
-        .align  5
-__turn_mmu_on:
-        mov     r0, r0
-        mcr     p15, 0, r0, c1, c0, 0           @ write control reg
-        mrc     p15, 0, r3, c0, c0, 0           @ read id reg
-        mov     r3, r3
-        mov     r3, r13
-        mov     pc, r3
-__enable_mmu_end:
-ENDPROC(__turn_mmu_on)
-
-
 /*
  * Setup the initial page tables.  We only setup the barest
  * amount which are required to get the kernel running, which
@@ -349,4 +249,106 @@ __enable_mmu_loc:
         .long   __enable_mmu
         .long   __enable_mmu_end
 
+#if defined(CONFIG_SMP)
+        __CPUINIT
+ENTRY(secondary_startup)
+        /*
+         * Common entry point for secondary CPUs.
+         *
+         * Ensure that we're in SVC mode, and IRQs are disabled.  Lookup
+         * the processor type - there is no need to check the machine type
+         * as it has already been validated by the primary processor.
+         */
+        setmode PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9
+        mrc     p15, 0, r9, c0, c0              @ get processor id
+        bl      __lookup_processor_type
+        movs    r10, r5                         @ invalid processor?
+        moveq   r0, #'p'                        @ yes, error 'p'
+        beq     __error_p
+
+        /*
+         * Use the page tables supplied from  __cpu_up.
+         */
+        adr     r4, __secondary_data
+        ldmia   r4, {r5, r7, r12}               @ address to jump to after
+        sub     r4, r4, r5                      @ mmu has been enabled
+        ldr     r4, [r7, r4]                    @ get secondary_data.pgdir
+        adr     lr, BSYM(__enable_mmu)          @ return address
+        mov     r13, r12                        @ __secondary_switched address
+ ARM(   add     pc, r10, #PROCINFO_INITFUNC     ) @ initialise processor
+                                                  @ (return control reg)
+ THUMB( add     r12, r10, #PROCINFO_INITFUNC    )
+ THUMB( mov     pc, r12                         )
+ENDPROC(secondary_startup)
+
+        /*
+         * r6  = &secondary_data
+         */
+ENTRY(__secondary_switched)
+        ldr     sp, [r7, #4]                    @ get secondary_data.stack
+        mov     fp, #0
+        b       secondary_start_kernel
+ENDPROC(__secondary_switched)
+
+        .type   __secondary_data, %object
+__secondary_data:
+        .long   .
+        .long   secondary_data
+        .long   __secondary_switched
+#endif /* defined(CONFIG_SMP) */
+
+
+
+/*
+ * Setup common bits before finally enabling the MMU.  Essentially
+ * this is just loading the page table pointer and domain access
+ * registers.
+ */
+__enable_mmu:
+#ifdef CONFIG_ALIGNMENT_TRAP
+        orr     r0, r0, #CR_A
+#else
+        bic     r0, r0, #CR_A
+#endif
+#ifdef CONFIG_CPU_DCACHE_DISABLE
+        bic     r0, r0, #CR_C
+#endif
+#ifdef CONFIG_CPU_BPREDICT_DISABLE
+        bic     r0, r0, #CR_Z
+#endif
+#ifdef CONFIG_CPU_ICACHE_DISABLE
+        bic     r0, r0, #CR_I
+#endif
+        mov     r5, #(domain_val(DOMAIN_USER, DOMAIN_MANAGER) | \
+                      domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) | \
+                      domain_val(DOMAIN_TABLE, DOMAIN_MANAGER) | \
+                      domain_val(DOMAIN_IO, DOMAIN_CLIENT))
+        mcr     p15, 0, r5, c3, c0, 0           @ load domain access register
+        mcr     p15, 0, r4, c2, c0, 0           @ load page table pointer
+        b       __turn_mmu_on
+ENDPROC(__enable_mmu)
+
+/*
+ * Enable the MMU.  This completely changes the structure of the visible
+ * memory space.  You will not be able to trace execution through this.
+ * If you have an enquiry about this, *please* check the linux-arm-kernel
+ * mailing list archives BEFORE sending another post to the list.
+ *
+ *  r0  = cp#15 control register
+ *  r13 = *virtual* address to jump to upon completion
+ *
+ * other registers depend on the function called upon completion
+ */
+        .align  5
+__turn_mmu_on:
+        mov     r0, r0
+        mcr     p15, 0, r0, c1, c0, 0           @ write control reg
+        mrc     p15, 0, r3, c0, c0, 0           @ read id reg
+        mov     r3, r3
+        mov     r3, r13
+        mov     pc, r3
+__enable_mmu_end:
+ENDPROC(__turn_mmu_on)
+
+
 #include "head-common.S"