4 files changed, 144 insertions, 158 deletions

diff --git a/drivers/char/xilinx_hwicap/buffer_icap.c b/drivers/char/xilinx_hwicap/buffer_icap.c
index dfea2bde162b..f577daedb630 100644
--- a/drivers/char/xilinx_hwicap/buffer_icap.c
+++ b/drivers/char/xilinx_hwicap/buffer_icap.c
@@ -73,8 +73,8 @@
 #define XHI_BUFFER_START 0
 
 /**
- * buffer_icap_get_status: Get the contents of the status register.
- * @parameter base_address: is the base address of the device
+ * buffer_icap_get_status - Get the contents of the status register.
+ * @base_address: is the base address of the device
  *
  * The status register contains the ICAP status and the done bit.
  *
@@ -94,9 +94,9 @@ static inline u32 buffer_icap_get_status(void __iomem *base_address)
 }
 
 /**
- * buffer_icap_get_bram: Reads data from the storage buffer bram.
- * @parameter base_address: contains the base address of the component.
- * @parameter offset: The word offset from which the data should be read.
+ * buffer_icap_get_bram - Reads data from the storage buffer bram.
+ * @base_address: contains the base address of the component.
+ * @offset: The word offset from which the data should be read.
  *
  * A bram is used as a configuration memory cache.  One frame of data can
  * be stored in this "storage buffer".
@@ -108,8 +108,8 @@ static inline u32 buffer_icap_get_bram(void __iomem *base_address,
 }
 
 /**
- * buffer_icap_busy: Return true if the icap device is busy
- * @parameter base_address: is the base address of the device
+ * buffer_icap_busy - Return true if the icap device is busy
+ * @base_address: is the base address of the device
  *
  * The queries the low order bit of the status register, which
  * indicates whether the current configuration or readback operation
@@ -121,8 +121,8 @@ static inline bool buffer_icap_busy(void __iomem *base_address)
 }
 
 /**
- * buffer_icap_busy: Return true if the icap device is not busy
- * @parameter base_address: is the base address of the device
+ * buffer_icap_busy - Return true if the icap device is not busy
+ * @base_address: is the base address of the device
  *
  * The queries the low order bit of the status register, which
  * indicates whether the current configuration or readback operation
@@ -134,9 +134,9 @@ static inline bool buffer_icap_done(void __iomem *base_address)
 }
 
 /**
- * buffer_icap_set_size: Set the size register.
- * @parameter base_address: is the base address of the device
- * @parameter data: The size in bytes.
+ * buffer_icap_set_size - Set the size register.
+ * @base_address: is the base address of the device
+ * @data: The size in bytes.
  *
  * The size register holds the number of 8 bit bytes to transfer between
  * bram and the icap (or icap to bram).
@@ -148,9 +148,9 @@ static inline void buffer_icap_set_size(void __iomem *base_address,
 }
 
 /**
- * buffer_icap_mSetoffsetReg: Set the bram offset register.
- * @parameter base_address: contains the base address of the device.
- * @parameter data: is the value to be written to the data register.
+ * buffer_icap_set_offset - Set the bram offset register.
+ * @base_address: contains the base address of the device.
+ * @data: is the value to be written to the data register.
  *
  * The bram offset register holds the starting bram address to transfer
  * data from during configuration or write data to during readback.
@@ -162,9 +162,9 @@ static inline void buffer_icap_set_offset(void __iomem *base_address,
 }
 
 /**
- * buffer_icap_set_rnc: Set the RNC (Readback not Configure) register.
- * @parameter base_address: contains the base address of the device.
- * @parameter data: is the value to be written to the data register.
+ * buffer_icap_set_rnc - Set the RNC (Readback not Configure) register.
+ * @base_address: contains the base address of the device.
+ * @data: is the value to be written to the data register.
  *
  * The RNC register determines the direction of the data transfer.  It
  * controls whether a configuration or readback take place.  Writing to
@@ -178,10 +178,10 @@ static inline void buffer_icap_set_rnc(void __iomem *base_address,
 }
 
 /**
- * buffer_icap_set_bram: Write data to the storage buffer bram.
- * @parameter base_address: contains the base address of the component.
- * @parameter offset: The word offset at which the data should be written.
- * @parameter data: The value to be written to the bram offset.
+ * buffer_icap_set_bram - Write data to the storage buffer bram.
+ * @base_address: contains the base address of the component.
+ * @offset: The word offset at which the data should be written.
+ * @data: The value to be written to the bram offset.
  *
  * A bram is used as a configuration memory cache.  One frame of data can
  * be stored in this "storage buffer".
@@ -193,10 +193,10 @@ static inline void buffer_icap_set_bram(void __iomem *base_address,
 }
 
 /**
- * buffer_icap_device_read: Transfer bytes from ICAP to the storage buffer.
- * @parameter drvdata: a pointer to the drvdata.
- * @parameter offset: The storage buffer start address.
- * @parameter count: The number of words (32 bit) to read from the
+ * buffer_icap_device_read - Transfer bytes from ICAP to the storage buffer.
+ * @drvdata: a pointer to the drvdata.
+ * @offset: The storage buffer start address.
+ * @count: The number of words (32 bit) to read from the
  *           device (ICAP).
  **/
 static int buffer_icap_device_read(struct hwicap_drvdata *drvdata,
@@ -227,10 +227,10 @@ static int buffer_icap_device_read(struct hwicap_drvdata *drvdata,
 };
 
 /**
- * buffer_icap_device_write: Transfer bytes from ICAP to the storage buffer.
- * @parameter drvdata: a pointer to the drvdata.
- * @parameter offset: The storage buffer start address.
- * @parameter count: The number of words (32 bit) to read from the
+ * buffer_icap_device_write - Transfer bytes from ICAP to the storage buffer.
+ * @drvdata: a pointer to the drvdata.
+ * @offset: The storage buffer start address.
+ * @count: The number of words (32 bit) to read from the
  *           device (ICAP).
  **/
 static int buffer_icap_device_write(struct hwicap_drvdata *drvdata,
@@ -261,8 +261,8 @@ static int buffer_icap_device_write(struct hwicap_drvdata *drvdata,
 };
 
 /**
- * buffer_icap_reset: Reset the logic of the icap device.
- * @parameter drvdata: a pointer to the drvdata.
+ * buffer_icap_reset - Reset the logic of the icap device.
+ * @drvdata: a pointer to the drvdata.
  *
  * Writing to the status register resets the ICAP logic in an internal
  * version of the core.  For the version of the core published in EDK,
@@ -274,10 +274,10 @@ void buffer_icap_reset(struct hwicap_drvdata *drvdata)
 }
 
 /**
- * buffer_icap_set_configuration: Load a partial bitstream from system memory.
- * @parameter drvdata: a pointer to the drvdata.
- * @parameter data: Kernel address of the partial bitstream.
- * @parameter size: the size of the partial bitstream in 32 bit words.
+ * buffer_icap_set_configuration - Load a partial bitstream from system memory.
+ * @drvdata: a pointer to the drvdata.
+ * @data: Kernel address of the partial bitstream.
+ * @size: the size of the partial bitstream in 32 bit words.
  **/
 int buffer_icap_set_configuration(struct hwicap_drvdata *drvdata, u32 *data,
                              u32 size)
@@ -333,10 +333,10 @@ int buffer_icap_set_configuration(struct hwicap_drvdata *drvdata, u32 *data,
 };
 
 /**
- * buffer_icap_get_configuration: Read configuration data from the device.
- * @parameter drvdata: a pointer to the drvdata.
- * @parameter data: Address of the data representing the partial bitstream
- * @parameter size: the size of the partial bitstream in 32 bit words.
+ * buffer_icap_get_configuration - Read configuration data from the device.
+ * @drvdata: a pointer to the drvdata.
+ * @data: Address of the data representing the partial bitstream
+ * @size: the size of the partial bitstream in 32 bit words.
  **/
 int buffer_icap_get_configuration(struct hwicap_drvdata *drvdata, u32 *data,
                              u32 size)
diff --git a/drivers/char/xilinx_hwicap/fifo_icap.c b/drivers/char/xilinx_hwicap/fifo_icap.c
index 0988314694a6..6f45dbd47125 100644
--- a/drivers/char/xilinx_hwicap/fifo_icap.c
+++ b/drivers/char/xilinx_hwicap/fifo_icap.c
@@ -94,9 +94,9 @@
 
 
 /**
- * fifo_icap_fifo_write: Write data to the write FIFO.
- * @parameter drvdata: a pointer to the drvdata.
- * @parameter data: the 32-bit value to be written to the FIFO.
+ * fifo_icap_fifo_write - Write data to the write FIFO.
+ * @drvdata: a pointer to the drvdata.
+ * @data: the 32-bit value to be written to the FIFO.
  *
  * This function will silently fail if the fifo is full.
  **/
@@ -108,8 +108,8 @@ static inline void fifo_icap_fifo_write(struct hwicap_drvdata *drvdata,
 }
 
 /**
- * fifo_icap_fifo_read: Read data from the Read FIFO.
- * @parameter drvdata: a pointer to the drvdata.
+ * fifo_icap_fifo_read - Read data from the Read FIFO.
+ * @drvdata: a pointer to the drvdata.
  *
  * This function will silently fail if the fifo is empty.
  **/
@@ -121,9 +121,9 @@ static inline u32 fifo_icap_fifo_read(struct hwicap_drvdata *drvdata)
 }
 
 /**
- * fifo_icap_set_read_size: Set the the size register.
- * @parameter drvdata: a pointer to the drvdata.
- * @parameter data: the size of the following read transaction, in words.
+ * fifo_icap_set_read_size - Set the the size register.
+ * @drvdata: a pointer to the drvdata.
+ * @data: the size of the following read transaction, in words.
  **/
 static inline void fifo_icap_set_read_size(struct hwicap_drvdata *drvdata,
                 u32 data)
@@ -132,8 +132,8 @@ static inline void fifo_icap_set_read_size(struct hwicap_drvdata *drvdata,
 }
 
 /**
- * fifo_icap_start_config: Initiate a configuration (write) to the device.
- * @parameter drvdata: a pointer to the drvdata.
+ * fifo_icap_start_config - Initiate a configuration (write) to the device.
+ * @drvdata: a pointer to the drvdata.
  **/
 static inline void fifo_icap_start_config(struct hwicap_drvdata *drvdata)
 {
@@ -142,8 +142,8 @@ static inline void fifo_icap_start_config(struct hwicap_drvdata *drvdata)
 }
 
 /**
- * fifo_icap_start_readback: Initiate a readback from the device.
- * @parameter drvdata: a pointer to the drvdata.
+ * fifo_icap_start_readback - Initiate a readback from the device.
+ * @drvdata: a pointer to the drvdata.
  **/
 static inline void fifo_icap_start_readback(struct hwicap_drvdata *drvdata)
 {
@@ -152,8 +152,8 @@ static inline void fifo_icap_start_readback(struct hwicap_drvdata *drvdata)
 }
 
 /**
- * fifo_icap_busy: Return true if the ICAP is still processing a transaction.
- * @parameter drvdata: a pointer to the drvdata.
+ * fifo_icap_busy - Return true if the ICAP is still processing a transaction.
+ * @drvdata: a pointer to the drvdata.
  **/
 static inline u32 fifo_icap_busy(struct hwicap_drvdata *drvdata)
 {
@@ -163,8 +163,8 @@ static inline u32 fifo_icap_busy(struct hwicap_drvdata *drvdata)
 }
 
 /**
- * fifo_icap_write_fifo_vacancy: Query the write fifo available space.
- * @parameter drvdata: a pointer to the drvdata.
+ * fifo_icap_write_fifo_vacancy - Query the write fifo available space.
+ * @drvdata: a pointer to the drvdata.
  *
  * Return the number of words that can be safely pushed into the write fifo.
  **/
@@ -175,8 +175,8 @@ static inline u32 fifo_icap_write_fifo_vacancy(
 }
 
 /**
- * fifo_icap_read_fifo_occupancy: Query the read fifo available data.
- * @parameter drvdata: a pointer to the drvdata.
+ * fifo_icap_read_fifo_occupancy - Query the read fifo available data.
+ * @drvdata: a pointer to the drvdata.
  *
  * Return the number of words that can be safely read from the read fifo.
  **/
@@ -187,11 +187,11 @@ static inline u32 fifo_icap_read_fifo_occupancy(
 }
 
 /**
- * fifo_icap_set_configuration: Send configuration data to the ICAP.
- * @parameter drvdata: a pointer to the drvdata.
- * @parameter frame_buffer: a pointer to the data to be written to the
+ * fifo_icap_set_configuration - Send configuration data to the ICAP.
+ * @drvdata: a pointer to the drvdata.
+ * @frame_buffer: a pointer to the data to be written to the
  *              ICAP device.
- * @parameter num_words: the number of words (32 bit) to write to the ICAP
+ * @num_words: the number of words (32 bit) to write to the ICAP
  *              device.
 
  * This function writes the given user data to the Write FIFO in
@@ -266,10 +266,10 @@ int fifo_icap_set_configuration(struct hwicap_drvdata *drvdata,
 }
 
 /**
- * fifo_icap_get_configuration: Read configuration data from the device.
- * @parameter drvdata: a pointer to the drvdata.
- * @parameter data: Address of the data representing the partial bitstream
- * @parameter size: the size of the partial bitstream in 32 bit words.
+ * fifo_icap_get_configuration - Read configuration data from the device.
+ * @drvdata: a pointer to the drvdata.
+ * @data: Address of the data representing the partial bitstream
+ * @size: the size of the partial bitstream in 32 bit words.
  *
  * This function reads the specified number of words from the ICAP device in
  * the polled mode.
@@ -335,8 +335,8 @@ int fifo_icap_get_configuration(struct hwicap_drvdata *drvdata,
 }
 
 /**
- * buffer_icap_reset: Reset the logic of the icap device.
- * @parameter drvdata: a pointer to the drvdata.
+ * buffer_icap_reset - Reset the logic of the icap device.
+ * @drvdata: a pointer to the drvdata.
  *
  * This function forces the software reset of the complete HWICAP device.
  * All the registers will return to the default value and the FIFO is also
@@ -360,8 +360,8 @@ void fifo_icap_reset(struct hwicap_drvdata *drvdata)
 }
 
 /**
- * fifo_icap_flush_fifo: This function flushes the FIFOs in the device.
- * @parameter drvdata: a pointer to the drvdata.
+ * fifo_icap_flush_fifo - This function flushes the FIFOs in the device.
+ * @drvdata: a pointer to the drvdata.
  */
 void fifo_icap_flush_fifo(struct hwicap_drvdata *drvdata)
 {
diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.c b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
index 24f6aef0fd3c..2284fa2a5a57 100644
--- a/drivers/char/xilinx_hwicap/xilinx_hwicap.c
+++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
@@ -84,7 +84,7 @@
 #include <linux/init.h>
 #include <linux/poll.h>
 #include <linux/proc_fs.h>
-#include <asm/semaphore.h>
+#include <linux/mutex.h>
 #include <linux/sysctl.h>
 #include <linux/version.h>
 #include <linux/fs.h>
@@ -119,6 +119,7 @@ module_param(xhwicap_minor, int, S_IRUGO);
 
 /* An array, which is set to true when the device is registered. */
 static bool probed_devices[HWICAP_DEVICES];
+static struct mutex icap_sem;
 
 static struct class *icap_class;
 
@@ -199,14 +200,14 @@ static const struct config_registers v5_config_registers = {
 };
 
 /**
- * hwicap_command_desync: Send a DESYNC command to the ICAP port.
- * @parameter drvdata: a pointer to the drvdata.
+ * hwicap_command_desync - Send a DESYNC command to the ICAP port.
+ * @drvdata: a pointer to the drvdata.
  *
  * This command desynchronizes the ICAP After this command, a
  * bitstream containing a NULL packet, followed by a SYNCH packet is
  * required before the ICAP will recognize commands.
  */
-int hwicap_command_desync(struct hwicap_drvdata *drvdata)
+static int hwicap_command_desync(struct hwicap_drvdata *drvdata)
 {
         u32 buffer[4];
         u32 index = 0;
@@ -228,51 +229,18 @@ int hwicap_command_desync(struct hwicap_drvdata *drvdata)
 }
 
 /**
- * hwicap_command_capture: Send a CAPTURE command to the ICAP port.
- * @parameter drvdata: a pointer to the drvdata.
- *
- * This command captures all of the flip flop states so they will be
- * available during readback.  One can use this command instead of
- * enabling the CAPTURE block in the design.
- */
-int hwicap_command_capture(struct hwicap_drvdata *drvdata)
-{
-        u32 buffer[7];
-        u32 index = 0;
-
-        /*
-         * Create the data to be written to the ICAP.
-         */
-        buffer[index++] = XHI_DUMMY_PACKET;
-        buffer[index++] = XHI_SYNC_PACKET;
-        buffer[index++] = XHI_NOOP_PACKET;
-        buffer[index++] = hwicap_type_1_write(drvdata->config_regs->CMD) | 1;
-        buffer[index++] = XHI_CMD_GCAPTURE;
-        buffer[index++] = XHI_DUMMY_PACKET;
-        buffer[index++] = XHI_DUMMY_PACKET;
-
-        /*
-         * Write the data to the FIFO and intiate the transfer of data
-         * present in the FIFO to the ICAP device.
-         */
-        return drvdata->config->set_configuration(drvdata,
-                        &buffer[0], index);
-
-}
-
-/**
- * hwicap_get_configuration_register: Query a configuration register.
- * @parameter drvdata: a pointer to the drvdata.
- * @parameter reg: a constant which represents the configuration
+ * hwicap_get_configuration_register - Query a configuration register.
+ * @drvdata: a pointer to the drvdata.
+ * @reg: a constant which represents the configuration
  *              register value to be returned.
  *              Examples:  XHI_IDCODE, XHI_FLR.
- * @parameter RegData: returns the value of the register.
+ * @reg_data: returns the value of the register.
  *
  * Sends a query packet to the ICAP and then receives the response.
  * The icap is left in Synched state.
  */
-int hwicap_get_configuration_register(struct hwicap_drvdata *drvdata,
-                u32 reg, u32 *RegData)
+static int hwicap_get_configuration_register(struct hwicap_drvdata *drvdata,
+                u32 reg, u32 *reg_data)
 {
         int status;
         u32 buffer[6];
@@ -300,14 +268,14 @@ int hwicap_get_configuration_register(struct hwicap_drvdata *drvdata,
         /*
          * Read the configuration register
          */
-        status = drvdata->config->get_configuration(drvdata, RegData, 1);
+        status = drvdata->config->get_configuration(drvdata, reg_data, 1);
         if (status)
                 return status;
 
         return 0;
 }
 
-int hwicap_initialize_hwicap(struct hwicap_drvdata *drvdata)
+static int hwicap_initialize_hwicap(struct hwicap_drvdata *drvdata)
 {
         int status;
         u32 idcode;
@@ -344,7 +312,7 @@ int hwicap_initialize_hwicap(struct hwicap_drvdata *drvdata)
 }
 
 static ssize_t
-hwicap_read(struct file *file, char *buf, size_t count, loff_t *ppos)
+hwicap_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
 {
         struct hwicap_drvdata *drvdata = file->private_data;
         ssize_t bytes_to_read = 0;
@@ -353,8 +321,9 @@ hwicap_read(struct file *file, char *buf, size_t count, loff_t *ppos)
         u32 bytes_remaining;
         int status;
 
-        if (down_interruptible(&drvdata->sem))
-                return -ERESTARTSYS;
+        status = mutex_lock_interruptible(&drvdata->sem);
+        if (status)
+                return status;
 
         if (drvdata->read_buffer_in_use) {
                 /* If there are leftover bytes in the buffer, just */
@@ -370,8 +339,9 @@ hwicap_read(struct file *file, char *buf, size_t count, loff_t *ppos)
                         goto error;
                 }
                 drvdata->read_buffer_in_use -= bytes_to_read;
-                memcpy(drvdata->read_buffer + bytes_to_read,
-                                drvdata->read_buffer, 4 - bytes_to_read);
+                memmove(drvdata->read_buffer,
+                       drvdata->read_buffer + bytes_to_read,
+                       4 - bytes_to_read);
         } else {
                 /* Get new data from the ICAP, and return was was requested. */
                 kbuf = (u32 *) get_zeroed_page(GFP_KERNEL);
@@ -414,18 +384,20 @@ hwicap_read(struct file *file, char *buf, size_t count, loff_t *ppos)
                         status = -EFAULT;
                         goto error;
                 }
-                memcpy(kbuf, drvdata->read_buffer, bytes_remaining);
+                memcpy(drvdata->read_buffer,
+                       kbuf,
+                       bytes_remaining);
                 drvdata->read_buffer_in_use = bytes_remaining;
                 free_page((unsigned long)kbuf);
         }
         status = bytes_to_read;
  error:
-        up(&drvdata->sem);
+        mutex_unlock(&drvdata->sem);
         return status;
 }
 
 static ssize_t
-hwicap_write(struct file *file, const char *buf,
+hwicap_write(struct file *file, const char __user *buf,
                 size_t count, loff_t *ppos)
 {
         struct hwicap_drvdata *drvdata = file->private_data;
@@ -435,8 +407,9 @@ hwicap_write(struct file *file, const char *buf,
         ssize_t len;
         ssize_t status;
 
-        if (down_interruptible(&drvdata->sem))
-                return -ERESTARTSYS;
+        status = mutex_lock_interruptible(&drvdata->sem);
+        if (status)
+                return status;
 
         left += drvdata->write_buffer_in_use;
 
@@ -465,7 +438,7 @@ hwicap_write(struct file *file, const char *buf,
                         memcpy(kbuf, drvdata->write_buffer,
                                         drvdata->write_buffer_in_use);
                         if (copy_from_user(
-                            (((char *)kbuf) + (drvdata->write_buffer_in_use)),
+                            (((char *)kbuf) + drvdata->write_buffer_in_use),
                             buf + written,
                             len - (drvdata->write_buffer_in_use))) {
                                 free_page((unsigned long)kbuf);
@@ -508,7 +481,7 @@ hwicap_write(struct file *file, const char *buf,
         free_page((unsigned long)kbuf);
         status = written;
  error:
-        up(&drvdata->sem);
+        mutex_unlock(&drvdata->sem);
         return status;
 }
 
@@ -519,8 +492,9 @@ static int hwicap_open(struct inode *inode, struct file *file)
 
         drvdata = container_of(inode->i_cdev, struct hwicap_drvdata, cdev);
 
-        if (down_interruptible(&drvdata->sem))
-                return -ERESTARTSYS;
+        status = mutex_lock_interruptible(&drvdata->sem);
+        if (status)
+                return status;
 
         if (drvdata->is_open) {
                 status = -EBUSY;
@@ -539,7 +513,7 @@ static int hwicap_open(struct inode *inode, struct file *file)
         drvdata->is_open = 1;
 
  error:
-        up(&drvdata->sem);
+        mutex_unlock(&drvdata->sem);
         return status;
 }
 
@@ -549,8 +523,7 @@ static int hwicap_release(struct inode *inode, struct file *file)
         int i;
         int status = 0;
 
-        if (down_interruptible(&drvdata->sem))
-                return -ERESTARTSYS;
+        mutex_lock(&drvdata->sem);
 
         if (drvdata->write_buffer_in_use) {
                 /* Flush write buffer. */
@@ -569,7 +542,7 @@ static int hwicap_release(struct inode *inode, struct file *file)
 
  error:
         drvdata->is_open = 0;
-        up(&drvdata->sem);
+        mutex_unlock(&drvdata->sem);
         return status;
 }
 
@@ -592,31 +565,36 @@ static int __devinit hwicap_setup(struct device *dev, int id,
 
         dev_info(dev, "Xilinx icap port driver\n");
 
+        mutex_lock(&icap_sem);
+
         if (id < 0) {
                 for (id = 0; id < HWICAP_DEVICES; id++)
                         if (!probed_devices[id])
                                 break;
         }
         if (id < 0 || id >= HWICAP_DEVICES) {
+                mutex_unlock(&icap_sem);
                 dev_err(dev, "%s%i too large\n", DRIVER_NAME, id);
                 return -EINVAL;
         }
         if (probed_devices[id]) {
+                mutex_unlock(&icap_sem);
                 dev_err(dev, "cannot assign to %s%i; it is already in use\n",
                         DRIVER_NAME, id);
                 return -EBUSY;
         }
 
         probed_devices[id] = 1;
+        mutex_unlock(&icap_sem);
 
         devt = MKDEV(xhwicap_major, xhwicap_minor + id);
 
-        drvdata = kmalloc(sizeof(struct hwicap_drvdata), GFP_KERNEL);
+        drvdata = kzalloc(sizeof(struct hwicap_drvdata), GFP_KERNEL);
         if (!drvdata) {
                 dev_err(dev, "Couldn't allocate device private record\n");
-                return -ENOMEM;
+                retval = -ENOMEM;
+                goto failed0;
         }
-        memset((void *)drvdata, 0, sizeof(struct hwicap_drvdata));
         dev_set_drvdata(dev, (void *)drvdata);
 
         if (!regs_res) {
@@ -648,7 +626,7 @@ static int __devinit hwicap_setup(struct device *dev, int id,
         drvdata->config = config;
         drvdata->config_regs = config_regs;
 
-        init_MUTEX(&drvdata->sem);
+        mutex_init(&drvdata->sem);
         drvdata->is_open = 0;
 
         dev_info(dev, "ioremap %lx to %p with size %x\n",
@@ -663,7 +641,7 @@ static int __devinit hwicap_setup(struct device *dev, int id,
                 goto failed3;
         }
         /*  devfs_mk_cdev(devt, S_IFCHR|S_IRUGO|S_IWUGO, DRIVER_NAME); */
-        class_device_create(icap_class, NULL, devt, NULL, DRIVER_NAME);
+        device_create(icap_class, dev, devt, "%s%d", DRIVER_NAME, id);
         return 0;               /* success */
 
  failed3:
@@ -675,6 +653,11 @@ static int __devinit hwicap_setup(struct device *dev, int id,
  failed1:
         kfree(drvdata);
 
+ failed0:
+        mutex_lock(&icap_sem);
+        probed_devices[id] = 0;
+        mutex_unlock(&icap_sem);
+
         return retval;
 }
 
@@ -699,14 +682,16 @@ static int __devexit hwicap_remove(struct device *dev)
         if (!drvdata)
                 return 0;
 
-        class_device_destroy(icap_class, drvdata->devt);
+        device_destroy(icap_class, drvdata->devt);
         cdev_del(&drvdata->cdev);
         iounmap(drvdata->base_address);
         release_mem_region(drvdata->mem_start, drvdata->mem_size);
         kfree(drvdata);
         dev_set_drvdata(dev, NULL);
-        probed_devices[MINOR(dev->devt)-xhwicap_minor] = 0;
 
+        mutex_lock(&icap_sem);
+        probed_devices[MINOR(dev->devt)-xhwicap_minor] = 0;
+        mutex_unlock(&icap_sem);
         return 0;               /* success */
 }
 
@@ -821,28 +806,29 @@ static struct of_platform_driver hwicap_of_driver = {
 };
 
 /* Registration helpers to keep the number of #ifdefs to a minimum */
-static inline int __devinit hwicap_of_register(void)
+static inline int __init hwicap_of_register(void)
 {
         pr_debug("hwicap: calling of_register_platform_driver()\n");
         return of_register_platform_driver(&hwicap_of_driver);
 }
 
-static inline void __devexit hwicap_of_unregister(void)
+static inline void __exit hwicap_of_unregister(void)
 {
         of_unregister_platform_driver(&hwicap_of_driver);
 }
 #else /* CONFIG_OF */
 /* CONFIG_OF not enabled; do nothing helpers */
-static inline int __devinit hwicap_of_register(void) { return 0; }
-static inline void __devexit hwicap_of_unregister(void) { }
+static inline int __init hwicap_of_register(void) { return 0; }
+static inline void __exit hwicap_of_unregister(void) { }
 #endif /* CONFIG_OF */
 
-static int __devinit hwicap_module_init(void)
+static int __init hwicap_module_init(void)
 {
         dev_t devt;
         int retval;
 
         icap_class = class_create(THIS_MODULE, "xilinx_config");
+        mutex_init(&icap_sem);
 
         if (xhwicap_major) {
                 devt = MKDEV(xhwicap_major, xhwicap_minor);
@@ -883,7 +869,7 @@ static int __devinit hwicap_module_init(void)
         return retval;
 }
 
-static void __devexit hwicap_module_cleanup(void)
+static void __exit hwicap_module_cleanup(void)
 {
         dev_t devt = MKDEV(xhwicap_major, xhwicap_minor);
 
diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.h b/drivers/char/xilinx_hwicap/xilinx_hwicap.h
index ae771cac1629..405fee7e189b 100644
--- a/drivers/char/xilinx_hwicap/xilinx_hwicap.h
+++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.h
@@ -48,9 +48,9 @@ struct hwicap_drvdata {
         u8 write_buffer[4];
         u32 read_buffer_in_use;   /* Always in [0,3] */
         u8 read_buffer[4];
-        u32 mem_start;            /* phys. address of the control registers */
-        u32 mem_end;              /* phys. address of the control registers */
-        u32 mem_size;
+        resource_size_t mem_start;/* phys. address of the control registers */
+        resource_size_t mem_end;  /* phys. address of the control registers */
+        resource_size_t mem_size;
         void __iomem *base_address;/* virt. address of the control registers */
 
         struct device *dev;
@@ -61,7 +61,7 @@ struct hwicap_drvdata {
         const struct config_registers *config_regs;
         void *private_data;
         bool is_open;
-        struct semaphore sem;
+        struct mutex sem;
 };
 
 struct hwicap_driver_config {
@@ -164,29 +164,29 @@ struct config_registers {
 #define XHI_DISABLED_AUTO_CRC       0x0000DEFCUL
 
 /**
- * hwicap_type_1_read: Generates a Type 1 read packet header.
- * @parameter: Register is the address of the register to be read back.
+ * hwicap_type_1_read - Generates a Type 1 read packet header.
+ * @reg: is the address of the register to be read back.
  *
  * Generates a Type 1 read packet header, which is used to indirectly
  * read registers in the configuration logic.  This packet must then
  * be sent through the icap device, and a return packet received with
  * the information.
  **/
-static inline u32 hwicap_type_1_read(u32 Register)
+static inline u32 hwicap_type_1_read(u32 reg)
 {
         return (XHI_TYPE_1 << XHI_TYPE_SHIFT) |
-                (Register << XHI_REGISTER_SHIFT) |
+                (reg << XHI_REGISTER_SHIFT) |
                 (XHI_OP_READ << XHI_OP_SHIFT);
 }
 
 /**
- * hwicap_type_1_write: Generates a Type 1 write packet header
- * @parameter: Register is the address of the register to be read back.
+ * hwicap_type_1_write - Generates a Type 1 write packet header
+ * @reg: is the address of the register to be read back.
  **/
-static inline u32 hwicap_type_1_write(u32 Register)
+static inline u32 hwicap_type_1_write(u32 reg)
 {
         return (XHI_TYPE_1 << XHI_TYPE_SHIFT) |
-                (Register << XHI_REGISTER_SHIFT) |
+                (reg << XHI_REGISTER_SHIFT) |
                 (XHI_OP_WRITE << XHI_OP_SHIFT);
 }