diff options
| -rw-r--r-- | arch/arm/configs/at91cap9adk_defconfig | 1143 | ||||
| -rw-r--r-- | arch/arm/mach-at91/Kconfig | 19 | ||||
| -rw-r--r-- | arch/arm/mach-at91/Makefile | 3 | ||||
| -rw-r--r-- | arch/arm/mach-at91/board-cap9adk.c | 359 |
4 files changed, 1522 insertions, 2 deletions
diff --git a/arch/arm/configs/at91cap9adk_defconfig b/arch/arm/configs/at91cap9adk_defconfig new file mode 100644 index 000000000000..e32e73648129 --- /dev/null +++ b/arch/arm/configs/at91cap9adk_defconfig | |||
| @@ -0,0 +1,1143 @@ | |||
| 1 | # | ||
| 2 | # Automatically generated make config: don't edit | ||
| 3 | # Linux kernel version: 2.6.24-rc8 | ||
| 4 | # Wed Jan 23 22:55:57 2008 | ||
| 5 | # | ||
| 6 | CONFIG_ARM=y | ||
| 7 | CONFIG_SYS_SUPPORTS_APM_EMULATION=y | ||
| 8 | CONFIG_GENERIC_GPIO=y | ||
| 9 | # CONFIG_GENERIC_TIME is not set | ||
| 10 | # CONFIG_GENERIC_CLOCKEVENTS is not set | ||
| 11 | CONFIG_MMU=y | ||
| 12 | # CONFIG_NO_IOPORT is not set | ||
| 13 | CONFIG_GENERIC_HARDIRQS=y | ||
| 14 | CONFIG_STACKTRACE_SUPPORT=y | ||
| 15 | CONFIG_LOCKDEP_SUPPORT=y | ||
| 16 | CONFIG_TRACE_IRQFLAGS_SUPPORT=y | ||
| 17 | CONFIG_HARDIRQS_SW_RESEND=y | ||
| 18 | CONFIG_GENERIC_IRQ_PROBE=y | ||
| 19 | CONFIG_RWSEM_GENERIC_SPINLOCK=y | ||
| 20 | # CONFIG_ARCH_HAS_ILOG2_U32 is not set | ||
| 21 | # CONFIG_ARCH_HAS_ILOG2_U64 is not set | ||
| 22 | CONFIG_GENERIC_HWEIGHT=y | ||
| 23 | CONFIG_GENERIC_CALIBRATE_DELAY=y | ||
| 24 | CONFIG_ZONE_DMA=y | ||
| 25 | CONFIG_VECTORS_BASE=0xffff0000 | ||
| 26 | CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" | ||
| 27 | |||
| 28 | # | ||
| 29 | # General setup | ||
| 30 | # | ||
| 31 | CONFIG_EXPERIMENTAL=y | ||
| 32 | CONFIG_BROKEN_ON_SMP=y | ||
| 33 | CONFIG_INIT_ENV_ARG_LIMIT=32 | ||
| 34 | CONFIG_LOCALVERSION="" | ||
| 35 | # CONFIG_LOCALVERSION_AUTO is not set | ||
| 36 | # CONFIG_SWAP is not set | ||
| 37 | CONFIG_SYSVIPC=y | ||
| 38 | CONFIG_SYSVIPC_SYSCTL=y | ||
| 39 | # CONFIG_POSIX_MQUEUE is not set | ||
| 40 | # CONFIG_BSD_PROCESS_ACCT is not set | ||
| 41 | # CONFIG_TASKSTATS is not set | ||
| 42 | # CONFIG_USER_NS is not set | ||
| 43 | # CONFIG_PID_NS is not set | ||
| 44 | # CONFIG_AUDIT is not set | ||
| 45 | # CONFIG_IKCONFIG is not set | ||
| 46 | CONFIG_LOG_BUF_SHIFT=14 | ||
| 47 | # CONFIG_CGROUPS is not set | ||
| 48 | CONFIG_FAIR_GROUP_SCHED=y | ||
| 49 | CONFIG_FAIR_USER_SCHED=y | ||
| 50 | # CONFIG_FAIR_CGROUP_SCHED is not set | ||
| 51 | CONFIG_SYSFS_DEPRECATED=y | ||
| 52 | # CONFIG_RELAY is not set | ||
| 53 | CONFIG_BLK_DEV_INITRD=y | ||
| 54 | CONFIG_INITRAMFS_SOURCE="" | ||
| 55 | CONFIG_CC_OPTIMIZE_FOR_SIZE=y | ||
| 56 | CONFIG_SYSCTL=y | ||
| 57 | # CONFIG_EMBEDDED is not set | ||
| 58 | CONFIG_UID16=y | ||
| 59 | CONFIG_SYSCTL_SYSCALL=y | ||
| 60 | CONFIG_KALLSYMS=y | ||
| 61 | # CONFIG_KALLSYMS_ALL is not set | ||
| 62 | # CONFIG_KALLSYMS_EXTRA_PASS is not set | ||
| 63 | CONFIG_HOTPLUG=y | ||
| 64 | CONFIG_PRINTK=y | ||
| 65 | CONFIG_BUG=y | ||
| 66 | CONFIG_ELF_CORE=y | ||
| 67 | CONFIG_BASE_FULL=y | ||
| 68 | CONFIG_FUTEX=y | ||
| 69 | CONFIG_ANON_INODES=y | ||
| 70 | CONFIG_EPOLL=y | ||
| 71 | CONFIG_SIGNALFD=y | ||
| 72 | CONFIG_EVENTFD=y | ||
| 73 | CONFIG_SHMEM=y | ||
| 74 | CONFIG_VM_EVENT_COUNTERS=y | ||
| 75 | CONFIG_SLAB=y | ||
| 76 | # CONFIG_SLUB is not set | ||
| 77 | # CONFIG_SLOB is not set | ||
| 78 | CONFIG_SLABINFO=y | ||
| 79 | CONFIG_RT_MUTEXES=y | ||
| 80 | # CONFIG_TINY_SHMEM is not set | ||
| 81 | CONFIG_BASE_SMALL=0 | ||
| 82 | CONFIG_MODULES=y | ||
| 83 | CONFIG_MODULE_UNLOAD=y | ||
| 84 | # CONFIG_MODULE_FORCE_UNLOAD is not set | ||
| 85 | # CONFIG_MODVERSIONS is not set | ||
| 86 | # CONFIG_MODULE_SRCVERSION_ALL is not set | ||
| 87 | CONFIG_KMOD=y | ||
| 88 | CONFIG_BLOCK=y | ||
| 89 | # CONFIG_LBD is not set | ||
| 90 | # CONFIG_BLK_DEV_IO_TRACE is not set | ||
| 91 | # CONFIG_LSF is not set | ||
| 92 | # CONFIG_BLK_DEV_BSG is not set | ||
| 93 | |||
| 94 | # | ||
| 95 | # IO Schedulers | ||
| 96 | # | ||
| 97 | CONFIG_IOSCHED_NOOP=y | ||
| 98 | CONFIG_IOSCHED_AS=y | ||
| 99 | # CONFIG_IOSCHED_DEADLINE is not set | ||
| 100 | # CONFIG_IOSCHED_CFQ is not set | ||
| 101 | CONFIG_DEFAULT_AS=y | ||
| 102 | # CONFIG_DEFAULT_DEADLINE is not set | ||
| 103 | # CONFIG_DEFAULT_CFQ is not set | ||
| 104 | # CONFIG_DEFAULT_NOOP is not set | ||
| 105 | CONFIG_DEFAULT_IOSCHED="anticipatory" | ||
| 106 | |||
| 107 | # | ||
| 108 | # System Type | ||
| 109 | # | ||
| 110 | # CONFIG_ARCH_AAEC2000 is not set | ||
| 111 | # CONFIG_ARCH_INTEGRATOR is not set | ||
| 112 | # CONFIG_ARCH_REALVIEW is not set | ||
| 113 | # CONFIG_ARCH_VERSATILE is not set | ||
| 114 | CONFIG_ARCH_AT91=y | ||
| 115 | # CONFIG_ARCH_CLPS7500 is not set | ||
| 116 | # CONFIG_ARCH_CLPS711X is not set | ||
| 117 | # CONFIG_ARCH_CO285 is not set | ||
| 118 | # CONFIG_ARCH_EBSA110 is not set | ||
| 119 | # CONFIG_ARCH_EP93XX is not set | ||
| 120 | # CONFIG_ARCH_FOOTBRIDGE is not set | ||
| 121 | # CONFIG_ARCH_NETX is not set | ||
| 122 | # CONFIG_ARCH_H720X is not set | ||
| 123 | # CONFIG_ARCH_IMX is not set | ||
| 124 | # CONFIG_ARCH_IOP13XX is not set | ||
| 125 | # CONFIG_ARCH_IOP32X is not set | ||
| 126 | # CONFIG_ARCH_IOP33X is not set | ||
| 127 | # CONFIG_ARCH_IXP23XX is not set | ||
| 128 | # CONFIG_ARCH_IXP2000 is not set | ||
| 129 | # CONFIG_ARCH_IXP4XX is not set | ||
| 130 | # CONFIG_ARCH_L7200 is not set | ||
| 131 | # CONFIG_ARCH_KS8695 is not set | ||
| 132 | # CONFIG_ARCH_NS9XXX is not set | ||
| 133 | # CONFIG_ARCH_MXC is not set | ||
| 134 | # CONFIG_ARCH_PNX4008 is not set | ||
| 135 | # CONFIG_ARCH_PXA is not set | ||
| 136 | # CONFIG_ARCH_RPC is not set | ||
| 137 | # CONFIG_ARCH_SA1100 is not set | ||
| 138 | # CONFIG_ARCH_S3C2410 is not set | ||
| 139 | # CONFIG_ARCH_SHARK is not set | ||
| 140 | # CONFIG_ARCH_LH7A40X is not set | ||
| 141 | # CONFIG_ARCH_DAVINCI is not set | ||
| 142 | # CONFIG_ARCH_OMAP is not set | ||
| 143 | |||
| 144 | # | ||
| 145 | # Boot options | ||
| 146 | # | ||
| 147 | |||
| 148 | # | ||
| 149 | # Power management | ||
| 150 | # | ||
| 151 | |||
| 152 | # | ||
| 153 | # Atmel AT91 System-on-Chip | ||
| 154 | # | ||
| 155 | # CONFIG_ARCH_AT91RM9200 is not set | ||
| 156 | # CONFIG_ARCH_AT91SAM9260 is not set | ||
| 157 | # CONFIG_ARCH_AT91SAM9261 is not set | ||
| 158 | # CONFIG_ARCH_AT91SAM9263 is not set | ||
| 159 | # CONFIG_ARCH_AT91SAM9RL is not set | ||
| 160 | CONFIG_ARCH_AT91CAP9=y | ||
| 161 | # CONFIG_ARCH_AT91X40 is not set | ||
| 162 | CONFIG_AT91_PMC_UNIT=y | ||
| 163 | |||
| 164 | # | ||
| 165 | # AT91CAP9 Board Type | ||
| 166 | # | ||
| 167 | CONFIG_MACH_AT91CAP9ADK=y | ||
| 168 | |||
| 169 | # | ||
| 170 | # AT91 Board Options | ||
| 171 | # | ||
| 172 | CONFIG_MTD_AT91_DATAFLASH_CARD=y | ||
| 173 | # CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set | ||
| 174 | |||
| 175 | # | ||
| 176 | # AT91 Feature Selections | ||
| 177 | # | ||
| 178 | CONFIG_AT91_PROGRAMMABLE_CLOCKS=y | ||
| 179 | CONFIG_AT91_TIMER_HZ=100 | ||
| 180 | |||
| 181 | # | ||
| 182 | # Processor Type | ||
| 183 | # | ||
| 184 | CONFIG_CPU_32=y | ||
| 185 | CONFIG_CPU_ARM926T=y | ||
| 186 | CONFIG_CPU_32v5=y | ||
| 187 | CONFIG_CPU_ABRT_EV5TJ=y | ||
| 188 | CONFIG_CPU_CACHE_VIVT=y | ||
| 189 | CONFIG_CPU_COPY_V4WB=y | ||
| 190 | CONFIG_CPU_TLB_V4WBI=y | ||
| 191 | CONFIG_CPU_CP15=y | ||
| 192 | CONFIG_CPU_CP15_MMU=y | ||
| 193 | |||
| 194 | # | ||
| 195 | # Processor Features | ||
| 196 | # | ||
| 197 | # CONFIG_ARM_THUMB is not set | ||
| 198 | # CONFIG_CPU_ICACHE_DISABLE is not set | ||
| 199 | # CONFIG_CPU_DCACHE_DISABLE is not set | ||
| 200 | # CONFIG_CPU_DCACHE_WRITETHROUGH is not set | ||
| 201 | # CONFIG_CPU_CACHE_ROUND_ROBIN is not set | ||
| 202 | # CONFIG_OUTER_CACHE is not set | ||
| 203 | |||
| 204 | # | ||
| 205 | # Bus support | ||
| 206 | # | ||
| 207 | # CONFIG_PCI_SYSCALL is not set | ||
| 208 | # CONFIG_ARCH_SUPPORTS_MSI is not set | ||
| 209 | # CONFIG_PCCARD is not set | ||
| 210 | |||
| 211 | # | ||
| 212 | # Kernel Features | ||
| 213 | # | ||
| 214 | # CONFIG_TICK_ONESHOT is not set | ||
| 215 | # CONFIG_PREEMPT is not set | ||
| 216 | # CONFIG_NO_IDLE_HZ is not set | ||
| 217 | CONFIG_HZ=100 | ||
| 218 | CONFIG_AEABI=y | ||
| 219 | CONFIG_OABI_COMPAT=y | ||
| 220 | # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set | ||
| 221 | CONFIG_SELECT_MEMORY_MODEL=y | ||
| 222 | CONFIG_FLATMEM_MANUAL=y | ||
| 223 | # CONFIG_DISCONTIGMEM_MANUAL is not set | ||
| 224 | # CONFIG_SPARSEMEM_MANUAL is not set | ||
| 225 | CONFIG_FLATMEM=y | ||
| 226 | CONFIG_FLAT_NODE_MEM_MAP=y | ||
| 227 | # CONFIG_SPARSEMEM_STATIC is not set | ||
| 228 | # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set | ||
| 229 | CONFIG_SPLIT_PTLOCK_CPUS=4096 | ||
| 230 | # CONFIG_RESOURCES_64BIT is not set | ||
| 231 | CONFIG_ZONE_DMA_FLAG=1 | ||
| 232 | CONFIG_BOUNCE=y | ||
| 233 | CONFIG_VIRT_TO_BUS=y | ||
| 234 | CONFIG_LEDS=y | ||
| 235 | CONFIG_LEDS_TIMER=y | ||
| 236 | CONFIG_LEDS_CPU=y | ||
| 237 | CONFIG_ALIGNMENT_TRAP=y | ||
| 238 | |||
| 239 | # | ||
| 240 | # Boot options | ||
| 241 | # | ||
| 242 | CONFIG_ZBOOT_ROM_TEXT=0x0 | ||
| 243 | CONFIG_ZBOOT_ROM_BSS=0x0 | ||
| 244 | CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram0 rw" | ||
| 245 | # CONFIG_XIP_KERNEL is not set | ||
| 246 | # CONFIG_KEXEC is not set | ||
| 247 | |||
| 248 | # | ||
| 249 | # Floating point emulation | ||
| 250 | # | ||
| 251 | |||
| 252 | # | ||
| 253 | # At least one emulation must be selected | ||
| 254 | # | ||
| 255 | CONFIG_FPE_NWFPE=y | ||
| 256 | # CONFIG_FPE_NWFPE_XP is not set | ||
| 257 | # CONFIG_FPE_FASTFPE is not set | ||
| 258 | # CONFIG_VFP is not set | ||
| 259 | |||
| 260 | # | ||
| 261 | # Userspace binary formats | ||
| 262 | # | ||
| 263 | CONFIG_BINFMT_ELF=y | ||
| 264 | # CONFIG_BINFMT_AOUT is not set | ||
| 265 | # CONFIG_BINFMT_MISC is not set | ||
| 266 | |||
| 267 | # | ||
| 268 | # Power management options | ||
| 269 | # | ||
| 270 | # CONFIG_PM is not set | ||
| 271 | CONFIG_SUSPEND_UP_POSSIBLE=y | ||
| 272 | |||
| 273 | # | ||
| 274 | # Networking | ||
| 275 | # | ||
| 276 | CONFIG_NET=y | ||
| 277 | |||
| 278 | # | ||
| 279 | # Networking options | ||
| 280 | # | ||
| 281 | CONFIG_PACKET=y | ||
| 282 | # CONFIG_PACKET_MMAP is not set | ||
| 283 | CONFIG_UNIX=y | ||
| 284 | # CONFIG_NET_KEY is not set | ||
| 285 | CONFIG_INET=y | ||
| 286 | # CONFIG_IP_MULTICAST is not set | ||
| 287 | # CONFIG_IP_ADVANCED_ROUTER is not set | ||
| 288 | CONFIG_IP_FIB_HASH=y | ||
| 289 | CONFIG_IP_PNP=y | ||
| 290 | # CONFIG_IP_PNP_DHCP is not set | ||
| 291 | CONFIG_IP_PNP_BOOTP=y | ||
| 292 | CONFIG_IP_PNP_RARP=y | ||
| 293 | # CONFIG_NET_IPIP is not set | ||
| 294 | # CONFIG_NET_IPGRE is not set | ||
| 295 | # CONFIG_ARPD is not set | ||
| 296 | # CONFIG_SYN_COOKIES is not set | ||
| 297 | # CONFIG_INET_AH is not set | ||
| 298 | # CONFIG_INET_ESP is not set | ||
| 299 | # CONFIG_INET_IPCOMP is not set | ||
| 300 | # CONFIG_INET_XFRM_TUNNEL is not set | ||
| 301 | # CONFIG_INET_TUNNEL is not set | ||
| 302 | # CONFIG_INET_XFRM_MODE_TRANSPORT is not set | ||
| 303 | # CONFIG_INET_XFRM_MODE_TUNNEL is not set | ||
| 304 | # CONFIG_INET_XFRM_MODE_BEET is not set | ||
| 305 | # CONFIG_INET_LRO is not set | ||
| 306 | # CONFIG_INET_DIAG is not set | ||
| 307 | # CONFIG_TCP_CONG_ADVANCED is not set | ||
| 308 | CONFIG_TCP_CONG_CUBIC=y | ||
| 309 | CONFIG_DEFAULT_TCP_CONG="cubic" | ||
| 310 | # CONFIG_TCP_MD5SIG is not set | ||
| 311 | # CONFIG_IPV6 is not set | ||
| 312 | # CONFIG_INET6_XFRM_TUNNEL is not set | ||
| 313 | # CONFIG_INET6_TUNNEL is not set | ||
| 314 | # CONFIG_NETWORK_SECMARK is not set | ||
| 315 | # CONFIG_NETFILTER is not set | ||
| 316 | # CONFIG_IP_DCCP is not set | ||
| 317 | # CONFIG_IP_SCTP is not set | ||
| 318 | # CONFIG_TIPC is not set | ||
| 319 | # CONFIG_ATM is not set | ||
| 320 | # CONFIG_BRIDGE is not set | ||
| 321 | # CONFIG_VLAN_8021Q is not set | ||
| 322 | # CONFIG_DECNET is not set | ||
| 323 | # CONFIG_LLC2 is not set | ||
| 324 | # CONFIG_IPX is not set | ||
| 325 | # CONFIG_ATALK is not set | ||
| 326 | # CONFIG_X25 is not set | ||
| 327 | # CONFIG_LAPB is not set | ||
| 328 | # CONFIG_ECONET is not set | ||
| 329 | # CONFIG_WAN_ROUTER is not set | ||
| 330 | # CONFIG_NET_SCHED is not set | ||
| 331 | |||
| 332 | # | ||
| 333 | # Network testing | ||
| 334 | # | ||
| 335 | # CONFIG_NET_PKTGEN is not set | ||
| 336 | # CONFIG_HAMRADIO is not set | ||
| 337 | # CONFIG_IRDA is not set | ||
| 338 | # CONFIG_BT is not set | ||
| 339 | # CONFIG_AF_RXRPC is not set | ||
| 340 | |||
| 341 | # | ||
| 342 | # Wireless | ||
| 343 | # | ||
| 344 | # CONFIG_CFG80211 is not set | ||
| 345 | # CONFIG_WIRELESS_EXT is not set | ||
| 346 | # CONFIG_MAC80211 is not set | ||
| 347 | # CONFIG_IEEE80211 is not set | ||
| 348 | # CONFIG_RFKILL is not set | ||
| 349 | # CONFIG_NET_9P is not set | ||
| 350 | |||
| 351 | # | ||
| 352 | # Device Drivers | ||
| 353 | # | ||
| 354 | |||
| 355 | # | ||
| 356 | # Generic Driver Options | ||
| 357 | # | ||
| 358 | CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" | ||
| 359 | CONFIG_STANDALONE=y | ||
| 360 | CONFIG_PREVENT_FIRMWARE_BUILD=y | ||
| 361 | # CONFIG_FW_LOADER is not set | ||
| 362 | # CONFIG_DEBUG_DRIVER is not set | ||
| 363 | # CONFIG_DEBUG_DEVRES is not set | ||
| 364 | # CONFIG_SYS_HYPERVISOR is not set | ||
| 365 | # CONFIG_CONNECTOR is not set | ||
| 366 | CONFIG_MTD=y | ||
| 367 | # CONFIG_MTD_DEBUG is not set | ||
| 368 | # CONFIG_MTD_CONCAT is not set | ||
| 369 | CONFIG_MTD_PARTITIONS=y | ||
| 370 | # CONFIG_MTD_REDBOOT_PARTS is not set | ||
| 371 | CONFIG_MTD_CMDLINE_PARTS=y | ||
| 372 | # CONFIG_MTD_AFS_PARTS is not set | ||
| 373 | |||
| 374 | # | ||
| 375 | # User Modules And Translation Layers | ||
| 376 | # | ||
| 377 | CONFIG_MTD_CHAR=y | ||
| 378 | CONFIG_MTD_BLKDEVS=y | ||
| 379 | CONFIG_MTD_BLOCK=y | ||
| 380 | # CONFIG_FTL is not set | ||
| 381 | # CONFIG_NFTL is not set | ||
| 382 | # CONFIG_INFTL is not set | ||
| 383 | # CONFIG_RFD_FTL is not set | ||
| 384 | # CONFIG_SSFDC is not set | ||
| 385 | # CONFIG_MTD_OOPS is not set | ||
| 386 | |||
| 387 | # | ||
| 388 | # RAM/ROM/Flash chip drivers | ||
| 389 | # | ||
| 390 | CONFIG_MTD_CFI=y | ||
| 391 | CONFIG_MTD_JEDECPROBE=y | ||
| 392 | CONFIG_MTD_GEN_PROBE=y | ||
| 393 | # CONFIG_MTD_CFI_ADV_OPTIONS is not set | ||
| 394 | CONFIG_MTD_MAP_BANK_WIDTH_1=y | ||
| 395 | CONFIG_MTD_MAP_BANK_WIDTH_2=y | ||
| 396 | CONFIG_MTD_MAP_BANK_WIDTH_4=y | ||
| 397 | # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set | ||
| 398 | # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set | ||
| 399 | # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set | ||
| 400 | CONFIG_MTD_CFI_I1=y | ||
| 401 | CONFIG_MTD_CFI_I2=y | ||
| 402 | # CONFIG_MTD_CFI_I4 is not set | ||
| 403 | # CONFIG_MTD_CFI_I8 is not set | ||
| 404 | # CONFIG_MTD_CFI_INTELEXT is not set | ||
| 405 | CONFIG_MTD_CFI_AMDSTD=y | ||
| 406 | # CONFIG_MTD_CFI_STAA is not set | ||
| 407 | CONFIG_MTD_CFI_UTIL=y | ||
| 408 | # CONFIG_MTD_RAM is not set | ||
| 409 | # CONFIG_MTD_ROM is not set | ||
| 410 | # CONFIG_MTD_ABSENT is not set | ||
| 411 | |||
| 412 | # | ||
| 413 | # Mapping drivers for chip access | ||
| 414 | # | ||
| 415 | # CONFIG_MTD_COMPLEX_MAPPINGS is not set | ||
| 416 | CONFIG_MTD_PHYSMAP=y | ||
| 417 | CONFIG_MTD_PHYSMAP_START=0x0 | ||
| 418 | CONFIG_MTD_PHYSMAP_LEN=0x0 | ||
| 419 | CONFIG_MTD_PHYSMAP_BANKWIDTH=0 | ||
| 420 | # CONFIG_MTD_ARM_INTEGRATOR is not set | ||
| 421 | # CONFIG_MTD_IMPA7 is not set | ||
| 422 | # CONFIG_MTD_PLATRAM is not set | ||
| 423 | |||
| 424 | # | ||
| 425 | # Self-contained MTD device drivers | ||
| 426 | # | ||
| 427 | CONFIG_MTD_DATAFLASH=y | ||
| 428 | # CONFIG_MTD_M25P80 is not set | ||
| 429 | # CONFIG_MTD_SLRAM is not set | ||
| 430 | # CONFIG_MTD_PHRAM is not set | ||
| 431 | # CONFIG_MTD_MTDRAM is not set | ||
| 432 | # CONFIG_MTD_BLOCK2MTD is not set | ||
| 433 | |||
| 434 | # | ||
| 435 | # Disk-On-Chip Device Drivers | ||
| 436 | # | ||
| 437 | # CONFIG_MTD_DOC2000 is not set | ||
| 438 | # CONFIG_MTD_DOC2001 is not set | ||
| 439 | # CONFIG_MTD_DOC2001PLUS is not set | ||
| 440 | CONFIG_MTD_NAND=y | ||
| 441 | # CONFIG_MTD_NAND_VERIFY_WRITE is not set | ||
| 442 | # CONFIG_MTD_NAND_ECC_SMC is not set | ||
| 443 | # CONFIG_MTD_NAND_MUSEUM_IDS is not set | ||
| 444 | CONFIG_MTD_NAND_IDS=y | ||
| 445 | # CONFIG_MTD_NAND_DISKONCHIP is not set | ||
| 446 | CONFIG_MTD_NAND_AT91=y | ||
| 447 | # CONFIG_MTD_NAND_NANDSIM is not set | ||
| 448 | # CONFIG_MTD_NAND_PLATFORM is not set | ||
| 449 | # CONFIG_MTD_ALAUDA is not set | ||
| 450 | # CONFIG_MTD_ONENAND is not set | ||
| 451 | |||
| 452 | # | ||
| 453 | # UBI - Unsorted block images | ||
| 454 | # | ||
| 455 | # CONFIG_MTD_UBI is not set | ||
| 456 | # CONFIG_PARPORT is not set | ||
| 457 | CONFIG_BLK_DEV=y | ||
| 458 | # CONFIG_BLK_DEV_COW_COMMON is not set | ||
| 459 | CONFIG_BLK_DEV_LOOP=y | ||
| 460 | # CONFIG_BLK_DEV_CRYPTOLOOP is not set | ||
| 461 | # CONFIG_BLK_DEV_NBD is not set | ||
| 462 | # CONFIG_BLK_DEV_UB is not set | ||
| 463 | CONFIG_BLK_DEV_RAM=y | ||
| 464 | CONFIG_BLK_DEV_RAM_COUNT=16 | ||
| 465 | CONFIG_BLK_DEV_RAM_SIZE=8192 | ||
| 466 | CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 | ||
| 467 | # CONFIG_CDROM_PKTCDVD is not set | ||
| 468 | # CONFIG_ATA_OVER_ETH is not set | ||
| 469 | CONFIG_MISC_DEVICES=y | ||
| 470 | # CONFIG_EEPROM_93CX6 is not set | ||
| 471 | CONFIG_ATMEL_SSC=y | ||
| 472 | |||
| 473 | # | ||
| 474 | # SCSI device support | ||
| 475 | # | ||
| 476 | # CONFIG_RAID_ATTRS is not set | ||
| 477 | CONFIG_SCSI=y | ||
| 478 | CONFIG_SCSI_DMA=y | ||
| 479 | # CONFIG_SCSI_TGT is not set | ||
| 480 | # CONFIG_SCSI_NETLINK is not set | ||
| 481 | CONFIG_SCSI_PROC_FS=y | ||
| 482 | |||
| 483 | # | ||
| 484 | # SCSI support type (disk, tape, CD-ROM) | ||
| 485 | # | ||
| 486 | CONFIG_BLK_DEV_SD=y | ||
| 487 | # CONFIG_CHR_DEV_ST is not set | ||
| 488 | # CONFIG_CHR_DEV_OSST is not set | ||
| 489 | # CONFIG_BLK_DEV_SR is not set | ||
| 490 | # CONFIG_CHR_DEV_SG is not set | ||
| 491 | # CONFIG_CHR_DEV_SCH is not set | ||
| 492 | |||
| 493 | # | ||
| 494 | # Some SCSI devices (e.g. CD jukebox) support multiple LUNs | ||
| 495 | # | ||
| 496 | CONFIG_SCSI_MULTI_LUN=y | ||
| 497 | # CONFIG_SCSI_CONSTANTS is not set | ||
| 498 | # CONFIG_SCSI_LOGGING is not set | ||
| 499 | # CONFIG_SCSI_SCAN_ASYNC is not set | ||
| 500 | CONFIG_SCSI_WAIT_SCAN=m | ||
| 501 | |||
| 502 | # | ||
| 503 | # SCSI Transports | ||
| 504 | # | ||
| 505 | # CONFIG_SCSI_SPI_ATTRS is not set | ||
| 506 | # CONFIG_SCSI_FC_ATTRS is not set | ||
| 507 | # CONFIG_SCSI_ISCSI_ATTRS is not set | ||
| 508 | # CONFIG_SCSI_SAS_LIBSAS is not set | ||
| 509 | # CONFIG_SCSI_SRP_ATTRS is not set | ||
| 510 | CONFIG_SCSI_LOWLEVEL=y | ||
| 511 | # CONFIG_ISCSI_TCP is not set | ||
| 512 | # CONFIG_SCSI_DEBUG is not set | ||
| 513 | # CONFIG_ATA is not set | ||
| 514 | # CONFIG_MD is not set | ||
| 515 | CONFIG_NETDEVICES=y | ||
| 516 | # CONFIG_NETDEVICES_MULTIQUEUE is not set | ||
| 517 | # CONFIG_DUMMY is not set | ||
| 518 | # CONFIG_BONDING is not set | ||
| 519 | # CONFIG_MACVLAN is not set | ||
| 520 | # CONFIG_EQUALIZER is not set | ||
| 521 | # CONFIG_TUN is not set | ||
| 522 | # CONFIG_VETH is not set | ||
| 523 | CONFIG_PHYLIB=y | ||
| 524 | |||
| 525 | # | ||
| 526 | # MII PHY device drivers | ||
| 527 | # | ||
| 528 | # CONFIG_MARVELL_PHY is not set | ||
| 529 | # CONFIG_DAVICOM_PHY is not set | ||
| 530 | # CONFIG_QSEMI_PHY is not set | ||
| 531 | # CONFIG_LXT_PHY is not set | ||
| 532 | # CONFIG_CICADA_PHY is not set | ||
| 533 | # CONFIG_VITESSE_PHY is not set | ||
| 534 | # CONFIG_SMSC_PHY is not set | ||
| 535 | # CONFIG_BROADCOM_PHY is not set | ||
| 536 | # CONFIG_ICPLUS_PHY is not set | ||
| 537 | # CONFIG_FIXED_PHY is not set | ||
| 538 | # CONFIG_MDIO_BITBANG is not set | ||
| 539 | CONFIG_NET_ETHERNET=y | ||
| 540 | CONFIG_MII=y | ||
| 541 | CONFIG_MACB=y | ||
| 542 | # CONFIG_AX88796 is not set | ||
| 543 | # CONFIG_SMC91X is not set | ||
| 544 | # CONFIG_DM9000 is not set | ||
| 545 | # CONFIG_IBM_NEW_EMAC_ZMII is not set | ||
| 546 | # CONFIG_IBM_NEW_EMAC_RGMII is not set | ||
| 547 | # CONFIG_IBM_NEW_EMAC_TAH is not set | ||
| 548 | # CONFIG_IBM_NEW_EMAC_EMAC4 is not set | ||
| 549 | # CONFIG_B44 is not set | ||
| 550 | # CONFIG_NETDEV_1000 is not set | ||
| 551 | # CONFIG_NETDEV_10000 is not set | ||
| 552 | |||
| 553 | # | ||
| 554 | # Wireless LAN | ||
| 555 | # | ||
| 556 | # CONFIG_WLAN_PRE80211 is not set | ||
| 557 | # CONFIG_WLAN_80211 is not set | ||
| 558 | |||
| 559 | # | ||
| 560 | # USB Network Adapters | ||
| 561 | # | ||
| 562 | # CONFIG_USB_CATC is not set | ||
| 563 | # CONFIG_USB_KAWETH is not set | ||
| 564 | # CONFIG_USB_PEGASUS is not set | ||
| 565 | # CONFIG_USB_RTL8150 is not set | ||
| 566 | # CONFIG_USB_USBNET is not set | ||
| 567 | # CONFIG_WAN is not set | ||
| 568 | # CONFIG_PPP is not set | ||
| 569 | # CONFIG_SLIP is not set | ||
| 570 | # CONFIG_SHAPER is not set | ||
| 571 | # CONFIG_NETCONSOLE is not set | ||
| 572 | # CONFIG_NETPOLL is not set | ||
| 573 | # CONFIG_NET_POLL_CONTROLLER is not set | ||
| 574 | # CONFIG_ISDN is not set | ||
| 575 | |||
| 576 | # | ||
| 577 | # Input device support | ||
| 578 | # | ||
| 579 | CONFIG_INPUT=y | ||
| 580 | # CONFIG_INPUT_FF_MEMLESS is not set | ||
| 581 | # CONFIG_INPUT_POLLDEV is not set | ||
| 582 | |||
| 583 | # | ||
| 584 | # Userland interfaces | ||
| 585 | # | ||
| 586 | CONFIG_INPUT_MOUSEDEV=y | ||
| 587 | # CONFIG_INPUT_MOUSEDEV_PSAUX is not set | ||
| 588 | CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 | ||
| 589 | CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 | ||
| 590 | # CONFIG_INPUT_JOYDEV is not set | ||
| 591 | CONFIG_INPUT_EVDEV=y | ||
| 592 | # CONFIG_INPUT_EVBUG is not set | ||
| 593 | |||
| 594 | # | ||
| 595 | # Input Device Drivers | ||
| 596 | # | ||
| 597 | # CONFIG_INPUT_KEYBOARD is not set | ||
| 598 | # CONFIG_INPUT_MOUSE is not set | ||
| 599 | # CONFIG_INPUT_JOYSTICK is not set | ||
| 600 | # CONFIG_INPUT_TABLET is not set | ||
| 601 | CONFIG_INPUT_TOUCHSCREEN=y | ||
| 602 | CONFIG_TOUCHSCREEN_ADS7846=y | ||
| 603 | # CONFIG_TOUCHSCREEN_FUJITSU is not set | ||
| 604 | # CONFIG_TOUCHSCREEN_GUNZE is not set | ||
| 605 | # CONFIG_TOUCHSCREEN_ELO is not set | ||
| 606 | # CONFIG_TOUCHSCREEN_MTOUCH is not set | ||
| 607 | # CONFIG_TOUCHSCREEN_MK712 is not set | ||
| 608 | # CONFIG_TOUCHSCREEN_PENMOUNT is not set | ||
| 609 | # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set | ||
| 610 | # CONFIG_TOUCHSCREEN_TOUCHWIN is not set | ||
| 611 | # CONFIG_TOUCHSCREEN_UCB1400 is not set | ||
| 612 | # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set | ||
| 613 | # CONFIG_INPUT_MISC is not set | ||
| 614 | |||
| 615 | # | ||
| 616 | # Hardware I/O ports | ||
| 617 | # | ||
| 618 | # CONFIG_SERIO is not set | ||
| 619 | # CONFIG_GAMEPORT is not set | ||
| 620 | |||
| 621 | # | ||
| 622 | # Character devices | ||
| 623 | # | ||
| 624 | CONFIG_VT=y | ||
| 625 | CONFIG_VT_CONSOLE=y | ||
| 626 | CONFIG_HW_CONSOLE=y | ||
| 627 | # CONFIG_VT_HW_CONSOLE_BINDING is not set | ||
| 628 | # CONFIG_SERIAL_NONSTANDARD is not set | ||
| 629 | |||
| 630 | # | ||
| 631 | # Serial drivers | ||
| 632 | # | ||
| 633 | # CONFIG_SERIAL_8250 is not set | ||
| 634 | |||
| 635 | # | ||
| 636 | # Non-8250 serial port support | ||
| 637 | # | ||
| 638 | CONFIG_SERIAL_ATMEL=y | ||
| 639 | CONFIG_SERIAL_ATMEL_CONSOLE=y | ||
| 640 | # CONFIG_SERIAL_ATMEL_TTYAT is not set | ||
| 641 | CONFIG_SERIAL_CORE=y | ||
| 642 | CONFIG_SERIAL_CORE_CONSOLE=y | ||
| 643 | CONFIG_UNIX98_PTYS=y | ||
| 644 | CONFIG_LEGACY_PTYS=y | ||
| 645 | CONFIG_LEGACY_PTY_COUNT=256 | ||
| 646 | # CONFIG_IPMI_HANDLER is not set | ||
| 647 | CONFIG_HW_RANDOM=y | ||
| 648 | # CONFIG_NVRAM is not set | ||
| 649 | # CONFIG_R3964 is not set | ||
| 650 | # CONFIG_RAW_DRIVER is not set | ||
| 651 | # CONFIG_TCG_TPM is not set | ||
| 652 | CONFIG_I2C=y | ||
| 653 | CONFIG_I2C_BOARDINFO=y | ||
| 654 | CONFIG_I2C_CHARDEV=y | ||
| 655 | |||
| 656 | # | ||
| 657 | # I2C Algorithms | ||
| 658 | # | ||
| 659 | # CONFIG_I2C_ALGOBIT is not set | ||
| 660 | # CONFIG_I2C_ALGOPCF is not set | ||
| 661 | # CONFIG_I2C_ALGOPCA is not set | ||
| 662 | |||
| 663 | # | ||
| 664 | # I2C Hardware Bus support | ||
| 665 | # | ||
| 666 | # CONFIG_I2C_GPIO is not set | ||
| 667 | # CONFIG_I2C_OCORES is not set | ||
| 668 | # CONFIG_I2C_PARPORT_LIGHT is not set | ||
| 669 | # CONFIG_I2C_SIMTEC is not set | ||
| 670 | # CONFIG_I2C_TAOS_EVM is not set | ||
| 671 | # CONFIG_I2C_STUB is not set | ||
| 672 | # CONFIG_I2C_TINY_USB is not set | ||
| 673 | |||
| 674 | # | ||
| 675 | # Miscellaneous I2C Chip support | ||
| 676 | # | ||
| 677 | # CONFIG_SENSORS_DS1337 is not set | ||
| 678 | # CONFIG_SENSORS_DS1374 is not set | ||
| 679 | # CONFIG_DS1682 is not set | ||
| 680 | # CONFIG_SENSORS_EEPROM is not set | ||
| 681 | # CONFIG_SENSORS_PCF8574 is not set | ||
| 682 | # CONFIG_SENSORS_PCA9539 is not set | ||
| 683 | # CONFIG_SENSORS_PCF8591 is not set | ||
| 684 | # CONFIG_SENSORS_MAX6875 is not set | ||
| 685 | # CONFIG_SENSORS_TSL2550 is not set | ||
| 686 | # CONFIG_I2C_DEBUG_CORE is not set | ||
| 687 | # CONFIG_I2C_DEBUG_ALGO is not set | ||
| 688 | # CONFIG_I2C_DEBUG_BUS is not set | ||
| 689 | # CONFIG_I2C_DEBUG_CHIP is not set | ||
| 690 | |||
| 691 | # | ||
| 692 | # SPI support | ||
| 693 | # | ||
| 694 | CONFIG_SPI=y | ||
| 695 | # CONFIG_SPI_DEBUG is not set | ||
| 696 | CONFIG_SPI_MASTER=y | ||
| 697 | |||
| 698 | # | ||
| 699 | # SPI Master Controller Drivers | ||
| 700 | # | ||
| 701 | CONFIG_SPI_ATMEL=y | ||
| 702 | # CONFIG_SPI_BITBANG is not set | ||
| 703 | |||
| 704 | # | ||
| 705 | # SPI Protocol Masters | ||
| 706 | # | ||
| 707 | # CONFIG_SPI_AT25 is not set | ||
| 708 | # CONFIG_SPI_SPIDEV is not set | ||
| 709 | # CONFIG_SPI_TLE62X0 is not set | ||
| 710 | # CONFIG_W1 is not set | ||
| 711 | # CONFIG_POWER_SUPPLY is not set | ||
| 712 | # CONFIG_HWMON is not set | ||
| 713 | CONFIG_WATCHDOG=y | ||
| 714 | CONFIG_WATCHDOG_NOWAYOUT=y | ||
| 715 | |||
| 716 | # | ||
| 717 | # Watchdog Device Drivers | ||
| 718 | # | ||
| 719 | # CONFIG_SOFT_WATCHDOG is not set | ||
| 720 | |||
| 721 | # | ||
| 722 | # USB-based Watchdog Cards | ||
| 723 | # | ||
| 724 | # CONFIG_USBPCWATCHDOG is not set | ||
| 725 | |||
| 726 | # | ||
| 727 | # Sonics Silicon Backplane | ||
| 728 | # | ||
| 729 | CONFIG_SSB_POSSIBLE=y | ||
| 730 | # CONFIG_SSB is not set | ||
| 731 | |||
| 732 | # | ||
| 733 | # Multifunction device drivers | ||
| 734 | # | ||
| 735 | # CONFIG_MFD_SM501 is not set | ||
| 736 | |||
| 737 | # | ||
| 738 | # Multimedia devices | ||
| 739 | # | ||
| 740 | # CONFIG_VIDEO_DEV is not set | ||
| 741 | # CONFIG_DVB_CORE is not set | ||
| 742 | # CONFIG_DAB is not set | ||
| 743 | |||
| 744 | # | ||
| 745 | # Graphics support | ||
| 746 | # | ||
| 747 | # CONFIG_VGASTATE is not set | ||
| 748 | # CONFIG_VIDEO_OUTPUT_CONTROL is not set | ||
| 749 | CONFIG_FB=y | ||
| 750 | # CONFIG_FIRMWARE_EDID is not set | ||
| 751 | # CONFIG_FB_DDC is not set | ||
| 752 | CONFIG_FB_CFB_FILLRECT=y | ||
| 753 | CONFIG_FB_CFB_COPYAREA=y | ||
| 754 | CONFIG_FB_CFB_IMAGEBLIT=y | ||
| 755 | # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set | ||
| 756 | # CONFIG_FB_SYS_FILLRECT is not set | ||
| 757 | # CONFIG_FB_SYS_COPYAREA is not set | ||
| 758 | # CONFIG_FB_SYS_IMAGEBLIT is not set | ||
| 759 | # CONFIG_FB_SYS_FOPS is not set | ||
| 760 | CONFIG_FB_DEFERRED_IO=y | ||
| 761 | # CONFIG_FB_SVGALIB is not set | ||
| 762 | # CONFIG_FB_MACMODES is not set | ||
| 763 | # CONFIG_FB_BACKLIGHT is not set | ||
| 764 | # CONFIG_FB_MODE_HELPERS is not set | ||
| 765 | # CONFIG_FB_TILEBLITTING is not set | ||
| 766 | |||
| 767 | # | ||
| 768 | # Frame buffer hardware drivers | ||
| 769 | # | ||
| 770 | # CONFIG_FB_S1D13XXX is not set | ||
| 771 | CONFIG_FB_ATMEL=y | ||
| 772 | # CONFIG_FB_VIRTUAL is not set | ||
| 773 | # CONFIG_BACKLIGHT_LCD_SUPPORT is not set | ||
| 774 | |||
| 775 | # | ||
| 776 | # Display device support | ||
| 777 | # | ||
| 778 | # CONFIG_DISPLAY_SUPPORT is not set | ||
| 779 | |||
| 780 | # | ||
| 781 | # Console display driver support | ||
| 782 | # | ||
| 783 | # CONFIG_VGA_CONSOLE is not set | ||
| 784 | CONFIG_DUMMY_CONSOLE=y | ||
| 785 | # CONFIG_FRAMEBUFFER_CONSOLE is not set | ||
| 786 | CONFIG_LOGO=y | ||
| 787 | # CONFIG_LOGO_LINUX_MONO is not set | ||
| 788 | CONFIG_LOGO_LINUX_VGA16=y | ||
| 789 | # CONFIG_LOGO_LINUX_CLUT224 is not set | ||
| 790 | |||
| 791 | # | ||
| 792 | # Sound | ||
| 793 | # | ||
| 794 | # CONFIG_SOUND is not set | ||
| 795 | CONFIG_HID_SUPPORT=y | ||
| 796 | CONFIG_HID=y | ||
| 797 | CONFIG_HID_DEBUG=y | ||
| 798 | # CONFIG_HIDRAW is not set | ||
| 799 | |||
| 800 | # | ||
| 801 | # USB Input Devices | ||
| 802 | # | ||
| 803 | # CONFIG_USB_HID is not set | ||
| 804 | |||
| 805 | # | ||
| 806 | # USB HID Boot Protocol drivers | ||
| 807 | # | ||
| 808 | # CONFIG_USB_KBD is not set | ||
| 809 | # CONFIG_USB_MOUSE is not set | ||
| 810 | CONFIG_USB_SUPPORT=y | ||
| 811 | CONFIG_USB_ARCH_HAS_HCD=y | ||
| 812 | CONFIG_USB_ARCH_HAS_OHCI=y | ||
| 813 | # CONFIG_USB_ARCH_HAS_EHCI is not set | ||
| 814 | CONFIG_USB=y | ||
| 815 | # CONFIG_USB_DEBUG is not set | ||
| 816 | |||
| 817 | # | ||
| 818 | # Miscellaneous USB options | ||
| 819 | # | ||
| 820 | CONFIG_USB_DEVICEFS=y | ||
| 821 | CONFIG_USB_DEVICE_CLASS=y | ||
| 822 | # CONFIG_USB_DYNAMIC_MINORS is not set | ||
| 823 | # CONFIG_USB_OTG is not set | ||
| 824 | |||
| 825 | # | ||
| 826 | # USB Host Controller Drivers | ||
| 827 | # | ||
| 828 | # CONFIG_USB_ISP116X_HCD is not set | ||
| 829 | CONFIG_USB_OHCI_HCD=y | ||
| 830 | # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set | ||
| 831 | # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set | ||
| 832 | CONFIG_USB_OHCI_LITTLE_ENDIAN=y | ||
| 833 | # CONFIG_USB_SL811_HCD is not set | ||
| 834 | # CONFIG_USB_R8A66597_HCD is not set | ||
| 835 | |||
| 836 | # | ||
| 837 | # USB Device Class drivers | ||
| 838 | # | ||
| 839 | # CONFIG_USB_ACM is not set | ||
| 840 | # CONFIG_USB_PRINTER is not set | ||
| 841 | |||
| 842 | # | ||
| 843 | # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' | ||
| 844 | # | ||
| 845 | |||
| 846 | # | ||
| 847 | # may also be needed; see USB_STORAGE Help for more information | ||
| 848 | # | ||
| 849 | CONFIG_USB_STORAGE=y | ||
| 850 | # CONFIG_USB_STORAGE_DEBUG is not set | ||
| 851 | # CONFIG_USB_STORAGE_DATAFAB is not set | ||
| 852 | # CONFIG_USB_STORAGE_FREECOM is not set | ||
| 853 | # CONFIG_USB_STORAGE_ISD200 is not set | ||
| 854 | # CONFIG_USB_STORAGE_DPCM is not set | ||
| 855 | # CONFIG_USB_STORAGE_USBAT is not set | ||
| 856 | # CONFIG_USB_STORAGE_SDDR09 is not set | ||
| 857 | # CONFIG_USB_STORAGE_SDDR55 is not set | ||
| 858 | # CONFIG_USB_STORAGE_JUMPSHOT is not set | ||
| 859 | # CONFIG_USB_STORAGE_ALAUDA is not set | ||
| 860 | # CONFIG_USB_STORAGE_ONETOUCH is not set | ||
| 861 | # CONFIG_USB_STORAGE_KARMA is not set | ||
| 862 | # CONFIG_USB_LIBUSUAL is not set | ||
| 863 | |||
| 864 | # | ||
| 865 | # USB Imaging devices | ||
| 866 | # | ||
| 867 | # CONFIG_USB_MDC800 is not set | ||
| 868 | # CONFIG_USB_MICROTEK is not set | ||
| 869 | CONFIG_USB_MON=y | ||
| 870 | |||
| 871 | # | ||
| 872 | # USB port drivers | ||
| 873 | # | ||
| 874 | |||
| 875 | # | ||
| 876 | # USB Serial Converter support | ||
| 877 | # | ||
| 878 | # CONFIG_USB_SERIAL is not set | ||
| 879 | |||
| 880 | # | ||
| 881 | # USB Miscellaneous drivers | ||
| 882 | # | ||
| 883 | # CONFIG_USB_EMI62 is not set | ||
| 884 | # CONFIG_USB_EMI26 is not set | ||
| 885 | # CONFIG_USB_ADUTUX is not set | ||
| 886 | # CONFIG_USB_AUERSWALD is not set | ||
| 887 | # CONFIG_USB_RIO500 is not set | ||
| 888 | # CONFIG_USB_LEGOTOWER is not set | ||
| 889 | # CONFIG_USB_LCD is not set | ||
| 890 | # CONFIG_USB_BERRY_CHARGE is not set | ||
| 891 | # CONFIG_USB_LED is not set | ||
| 892 | # CONFIG_USB_CYPRESS_CY7C63 is not set | ||
| 893 | # CONFIG_USB_CYTHERM is not set | ||
| 894 | # CONFIG_USB_PHIDGET is not set | ||
| 895 | # CONFIG_USB_IDMOUSE is not set | ||
| 896 | # CONFIG_USB_FTDI_ELAN is not set | ||
| 897 | # CONFIG_USB_APPLEDISPLAY is not set | ||
| 898 | # CONFIG_USB_LD is not set | ||
| 899 | # CONFIG_USB_TRANCEVIBRATOR is not set | ||
| 900 | # CONFIG_USB_IOWARRIOR is not set | ||
| 901 | # CONFIG_USB_TEST is not set | ||
| 902 | |||
| 903 | # | ||
| 904 | # USB DSL modem support | ||
| 905 | # | ||
| 906 | |||
| 907 | # | ||
| 908 | # USB Gadget Support | ||
| 909 | # | ||
| 910 | # CONFIG_USB_GADGET is not set | ||
| 911 | CONFIG_MMC=y | ||
| 912 | # CONFIG_MMC_DEBUG is not set | ||
| 913 | # CONFIG_MMC_UNSAFE_RESUME is not set | ||
| 914 | |||
| 915 | # | ||
| 916 | # MMC/SD Card Drivers | ||
| 917 | # | ||
| 918 | CONFIG_MMC_BLOCK=y | ||
| 919 | CONFIG_MMC_BLOCK_BOUNCE=y | ||
| 920 | # CONFIG_SDIO_UART is not set | ||
| 921 | |||
| 922 | # | ||
| 923 | # MMC/SD Host Controller Drivers | ||
| 924 | # | ||
| 925 | CONFIG_MMC_AT91=y | ||
| 926 | # CONFIG_MMC_SPI is not set | ||
| 927 | # CONFIG_NEW_LEDS is not set | ||
| 928 | CONFIG_RTC_LIB=y | ||
| 929 | # CONFIG_RTC_CLASS is not set | ||
| 930 | |||
| 931 | # | ||
| 932 | # File systems | ||
| 933 | # | ||
| 934 | CONFIG_EXT2_FS=y | ||
| 935 | # CONFIG_EXT2_FS_XATTR is not set | ||
| 936 | # CONFIG_EXT2_FS_XIP is not set | ||
| 937 | # CONFIG_EXT3_FS is not set | ||
| 938 | # CONFIG_EXT4DEV_FS is not set | ||
| 939 | # CONFIG_REISERFS_FS is not set | ||
| 940 | # CONFIG_JFS_FS is not set | ||
| 941 | # CONFIG_FS_POSIX_ACL is not set | ||
| 942 | # CONFIG_XFS_FS is not set | ||
| 943 | # CONFIG_GFS2_FS is not set | ||
| 944 | # CONFIG_OCFS2_FS is not set | ||
| 945 | # CONFIG_MINIX_FS is not set | ||
| 946 | # CONFIG_ROMFS_FS is not set | ||
| 947 | CONFIG_INOTIFY=y | ||
| 948 | CONFIG_INOTIFY_USER=y | ||
| 949 | # CONFIG_QUOTA is not set | ||
| 950 | CONFIG_DNOTIFY=y | ||
| 951 | # CONFIG_AUTOFS_FS is not set | ||
| 952 | # CONFIG_AUTOFS4_FS is not set | ||
| 953 | # CONFIG_FUSE_FS is not set | ||
| 954 | |||
| 955 | # | ||
| 956 | # CD-ROM/DVD Filesystems | ||
| 957 | # | ||
| 958 | # CONFIG_ISO9660_FS is not set | ||
| 959 | # CONFIG_UDF_FS is not set | ||
| 960 | |||
| 961 | # | ||
| 962 | # DOS/FAT/NT Filesystems | ||
| 963 | # | ||
| 964 | CONFIG_FAT_FS=y | ||
| 965 | # CONFIG_MSDOS_FS is not set | ||
| 966 | CONFIG_VFAT_FS=y | ||
| 967 | CONFIG_FAT_DEFAULT_CODEPAGE=437 | ||
| 968 | CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" | ||
| 969 | # CONFIG_NTFS_FS is not set | ||
| 970 | |||
| 971 | # | ||
| 972 | # Pseudo filesystems | ||
| 973 | # | ||
| 974 | CONFIG_PROC_FS=y | ||
| 975 | CONFIG_PROC_SYSCTL=y | ||
| 976 | CONFIG_SYSFS=y | ||
| 977 | CONFIG_TMPFS=y | ||
| 978 | # CONFIG_TMPFS_POSIX_ACL is not set | ||
| 979 | # CONFIG_HUGETLB_PAGE is not set | ||
| 980 | # CONFIG_CONFIGFS_FS is not set | ||
| 981 | |||
| 982 | # | ||
| 983 | # Miscellaneous filesystems | ||
| 984 | # | ||
| 985 | # CONFIG_ADFS_FS is not set | ||
| 986 | # CONFIG_AFFS_FS is not set | ||
| 987 | # CONFIG_HFS_FS is not set | ||
| 988 | # CONFIG_HFSPLUS_FS is not set | ||
| 989 | # CONFIG_BEFS_FS is not set | ||
| 990 | # CONFIG_BFS_FS is not set | ||
| 991 | # CONFIG_EFS_FS is not set | ||
| 992 | CONFIG_JFFS2_FS=y | ||
| 993 | CONFIG_JFFS2_FS_DEBUG=0 | ||
| 994 | CONFIG_JFFS2_FS_WRITEBUFFER=y | ||
| 995 | # CONFIG_JFFS2_FS_WBUF_VERIFY is not set | ||
| 996 | # CONFIG_JFFS2_SUMMARY is not set | ||
| 997 | # CONFIG_JFFS2_FS_XATTR is not set | ||
| 998 | # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set | ||
| 999 | CONFIG_JFFS2_ZLIB=y | ||
| 1000 | # CONFIG_JFFS2_LZO is not set | ||
| 1001 | CONFIG_JFFS2_RTIME=y | ||
| 1002 | # CONFIG_JFFS2_RUBIN is not set | ||
| 1003 | CONFIG_CRAMFS=y | ||
| 1004 | # CONFIG_VXFS_FS is not set | ||
| 1005 | # CONFIG_HPFS_FS is not set | ||
| 1006 | # CONFIG_QNX4FS_FS is not set | ||
| 1007 | # CONFIG_SYSV_FS is not set | ||
| 1008 | # CONFIG_UFS_FS is not set | ||
| 1009 | CONFIG_NETWORK_FILESYSTEMS=y | ||
| 1010 | CONFIG_NFS_FS=y | ||
| 1011 | # CONFIG_NFS_V3 is not set | ||
| 1012 | # CONFIG_NFS_V4 is not set | ||
| 1013 | # CONFIG_NFS_DIRECTIO is not set | ||
| 1014 | # CONFIG_NFSD is not set | ||
| 1015 | CONFIG_ROOT_NFS=y | ||
| 1016 | CONFIG_LOCKD=y | ||
| 1017 | CONFIG_NFS_COMMON=y | ||
| 1018 | CONFIG_SUNRPC=y | ||
| 1019 | # CONFIG_SUNRPC_BIND34 is not set | ||
| 1020 | # CONFIG_RPCSEC_GSS_KRB5 is not set | ||
| 1021 | # CONFIG_RPCSEC_GSS_SPKM3 is not set | ||
| 1022 | # CONFIG_SMB_FS is not set | ||
| 1023 | # CONFIG_CIFS is not set | ||
| 1024 | # CONFIG_NCP_FS is not set | ||
| 1025 | # CONFIG_CODA_FS is not set | ||
| 1026 | # CONFIG_AFS_FS is not set | ||
| 1027 | |||
| 1028 | # | ||
| 1029 | # Partition Types | ||
| 1030 | # | ||
| 1031 | # CONFIG_PARTITION_ADVANCED is not set | ||
| 1032 | CONFIG_MSDOS_PARTITION=y | ||
| 1033 | CONFIG_NLS=y | ||
| 1034 | CONFIG_NLS_DEFAULT="iso8859-1" | ||
| 1035 | CONFIG_NLS_CODEPAGE_437=y | ||
| 1036 | # CONFIG_NLS_CODEPAGE_737 is not set | ||
| 1037 | # CONFIG_NLS_CODEPAGE_775 is not set | ||
| 1038 | CONFIG_NLS_CODEPAGE_850=y | ||
| 1039 | # CONFIG_NLS_CODEPAGE_852 is not set | ||
| 1040 | # CONFIG_NLS_CODEPAGE_855 is not set | ||
| 1041 | # CONFIG_NLS_CODEPAGE_857 is not set | ||
| 1042 | # CONFIG_NLS_CODEPAGE_860 is not set | ||
| 1043 | # CONFIG_NLS_CODEPAGE_861 is not set | ||
| 1044 | # CONFIG_NLS_CODEPAGE_862 is not set | ||
| 1045 | # CONFIG_NLS_CODEPAGE_863 is not set | ||
| 1046 | # CONFIG_NLS_CODEPAGE_864 is not set | ||
| 1047 | # CONFIG_NLS_CODEPAGE_865 is not set | ||
| 1048 | # CONFIG_NLS_CODEPAGE_866 is not set | ||
| 1049 | # CONFIG_NLS_CODEPAGE_869 is not set | ||
| 1050 | # CONFIG_NLS_CODEPAGE_936 is not set | ||
| 1051 | # CONFIG_NLS_CODEPAGE_950 is not set | ||
| 1052 | # CONFIG_NLS_CODEPAGE_932 is not set | ||
| 1053 | # CONFIG_NLS_CODEPAGE_949 is not set | ||
| 1054 | # CONFIG_NLS_CODEPAGE_874 is not set | ||
| 1055 | # CONFIG_NLS_ISO8859_8 is not set | ||
| 1056 | # CONFIG_NLS_CODEPAGE_1250 is not set | ||
| 1057 | # CONFIG_NLS_CODEPAGE_1251 is not set | ||
| 1058 | # CONFIG_NLS_ASCII is not set | ||
| 1059 | CONFIG_NLS_ISO8859_1=y | ||
| 1060 | # CONFIG_NLS_ISO8859_2 is not set | ||
| 1061 | # CONFIG_NLS_ISO8859_3 is not set | ||
| 1062 | # CONFIG_NLS_ISO8859_4 is not set | ||
| 1063 | # CONFIG_NLS_ISO8859_5 is not set | ||
| 1064 | # CONFIG_NLS_ISO8859_6 is not set | ||
| 1065 | # CONFIG_NLS_ISO8859_7 is not set | ||
| 1066 | # CONFIG_NLS_ISO8859_9 is not set | ||
| 1067 | # CONFIG_NLS_ISO8859_13 is not set | ||
| 1068 | # CONFIG_NLS_ISO8859_14 is not set | ||
| 1069 | # CONFIG_NLS_ISO8859_15 is not set | ||
| 1070 | # CONFIG_NLS_KOI8_R is not set | ||
| 1071 | # CONFIG_NLS_KOI8_U is not set | ||
| 1072 | # CONFIG_NLS_UTF8 is not set | ||
| 1073 | # CONFIG_DLM is not set | ||
| 1074 | CONFIG_INSTRUMENTATION=y | ||
| 1075 | # CONFIG_PROFILING is not set | ||
| 1076 | # CONFIG_MARKERS is not set | ||
| 1077 | |||
| 1078 | # | ||
| 1079 | # Kernel hacking | ||
| 1080 | # | ||
| 1081 | # CONFIG_PRINTK_TIME is not set | ||
| 1082 | CONFIG_ENABLE_WARN_DEPRECATED=y | ||
| 1083 | CONFIG_ENABLE_MUST_CHECK=y | ||
| 1084 | # CONFIG_MAGIC_SYSRQ is not set | ||
| 1085 | # CONFIG_UNUSED_SYMBOLS is not set | ||
| 1086 | CONFIG_DEBUG_FS=y | ||
| 1087 | # CONFIG_HEADERS_CHECK is not set | ||
| 1088 | CONFIG_DEBUG_KERNEL=y | ||
| 1089 | # CONFIG_DEBUG_SHIRQ is not set | ||
| 1090 | CONFIG_DETECT_SOFTLOCKUP=y | ||
| 1091 | CONFIG_SCHED_DEBUG=y | ||
| 1092 | # CONFIG_SCHEDSTATS is not set | ||
| 1093 | # CONFIG_TIMER_STATS is not set | ||
| 1094 | # CONFIG_DEBUG_SLAB is not set | ||
| 1095 | # CONFIG_DEBUG_RT_MUTEXES is not set | ||
| 1096 | # CONFIG_RT_MUTEX_TESTER is not set | ||
| 1097 | # CONFIG_DEBUG_SPINLOCK is not set | ||
| 1098 | # CONFIG_DEBUG_MUTEXES is not set | ||
| 1099 | # CONFIG_DEBUG_LOCK_ALLOC is not set | ||
| 1100 | # CONFIG_PROVE_LOCKING is not set | ||
| 1101 | # CONFIG_LOCK_STAT is not set | ||
| 1102 | # CONFIG_DEBUG_SPINLOCK_SLEEP is not set | ||
| 1103 | # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set | ||
| 1104 | # CONFIG_DEBUG_KOBJECT is not set | ||
| 1105 | CONFIG_DEBUG_BUGVERBOSE=y | ||
| 1106 | CONFIG_DEBUG_INFO=y | ||
| 1107 | # CONFIG_DEBUG_VM is not set | ||
| 1108 | # CONFIG_DEBUG_LIST is not set | ||
| 1109 | # CONFIG_DEBUG_SG is not set | ||
| 1110 | CONFIG_FRAME_POINTER=y | ||
| 1111 | CONFIG_FORCED_INLINING=y | ||
| 1112 | # CONFIG_BOOT_PRINTK_DELAY is not set | ||
| 1113 | # CONFIG_RCU_TORTURE_TEST is not set | ||
| 1114 | # CONFIG_FAULT_INJECTION is not set | ||
| 1115 | # CONFIG_SAMPLES is not set | ||
| 1116 | CONFIG_DEBUG_USER=y | ||
| 1117 | # CONFIG_DEBUG_ERRORS is not set | ||
| 1118 | # CONFIG_DEBUG_LL is not set | ||
| 1119 | |||
| 1120 | # | ||
| 1121 | # Security options | ||
| 1122 | # | ||
| 1123 | # CONFIG_KEYS is not set | ||
| 1124 | # CONFIG_SECURITY is not set | ||
| 1125 | # CONFIG_SECURITY_FILE_CAPABILITIES is not set | ||
| 1126 | # CONFIG_CRYPTO is not set | ||
| 1127 | |||
| 1128 | # | ||
| 1129 | # Library routines | ||
| 1130 | # | ||
| 1131 | CONFIG_BITREVERSE=y | ||
| 1132 | # CONFIG_CRC_CCITT is not set | ||
| 1133 | # CONFIG_CRC16 is not set | ||
| 1134 | # CONFIG_CRC_ITU_T is not set | ||
| 1135 | CONFIG_CRC32=y | ||
| 1136 | # CONFIG_CRC7 is not set | ||
| 1137 | # CONFIG_LIBCRC32C is not set | ||
| 1138 | CONFIG_ZLIB_INFLATE=y | ||
| 1139 | CONFIG_ZLIB_DEFLATE=y | ||
| 1140 | CONFIG_PLIST=y | ||
| 1141 | CONFIG_HAS_IOMEM=y | ||
| 1142 | CONFIG_HAS_IOPORT=y | ||
| 1143 | CONFIG_HAS_DMA=y | ||
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index d12c616407d6..5b0422cdde76 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig | |||
| @@ -181,6 +181,21 @@ endif | |||
| 181 | 181 | ||
| 182 | # ---------------------------------------------------------- | 182 | # ---------------------------------------------------------- |
| 183 | 183 | ||
| 184 | if ARCH_AT91CAP9 | ||
| 185 | |||
| 186 | comment "AT91CAP9 Board Type" | ||
| 187 | |||
| 188 | config MACH_AT91CAP9ADK | ||
| 189 | bool "Atmel AT91CAP9A-DK Evaluation Kit" | ||
| 190 | depends on ARCH_AT91CAP9 | ||
| 191 | help | ||
| 192 | Select this if you are using Atmel's AT91CAP9A-DK Evaluation Kit. | ||
| 193 | <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4138> | ||
| 194 | |||
| 195 | endif | ||
| 196 | |||
| 197 | # ---------------------------------------------------------- | ||
| 198 | |||
| 184 | if ARCH_AT91X40 | 199 | if ARCH_AT91X40 |
| 185 | 200 | ||
| 186 | comment "AT91X40 Board Type" | 201 | comment "AT91X40 Board Type" |
| @@ -201,13 +216,13 @@ comment "AT91 Board Options" | |||
| 201 | 216 | ||
| 202 | config MTD_AT91_DATAFLASH_CARD | 217 | config MTD_AT91_DATAFLASH_CARD |
| 203 | bool "Enable DataFlash Card support" | 218 | bool "Enable DataFlash Card support" |
| 204 | depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK) | 219 | depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91CAP9ADK) |
| 205 | help | 220 | help |
| 206 | Enable support for the DataFlash card. | 221 | Enable support for the DataFlash card. |
| 207 | 222 | ||
| 208 | config MTD_NAND_AT91_BUSWIDTH_16 | 223 | config MTD_NAND_AT91_BUSWIDTH_16 |
| 209 | bool "Enable 16-bit data bus interface to NAND flash" | 224 | bool "Enable 16-bit data bus interface to NAND flash" |
| 210 | depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK) | 225 | depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91CAP9ADK) |
| 211 | help | 226 | help |
| 212 | On AT91SAM926x boards both types of NAND flash can be present | 227 | On AT91SAM926x boards both types of NAND flash can be present |
| 213 | (8 and 16 bit data bus width). | 228 | (8 and 16 bit data bus width). |
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index 10413c5d3f8a..bf5f293dccf8 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile | |||
| @@ -42,6 +42,9 @@ obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o | |||
| 42 | # AT91SAM9RL board-specific support | 42 | # AT91SAM9RL board-specific support |
| 43 | obj-$(CONFIG_MACH_AT91SAM9RLEK) += board-sam9rlek.o | 43 | obj-$(CONFIG_MACH_AT91SAM9RLEK) += board-sam9rlek.o |
| 44 | 44 | ||
| 45 | # AT91CAP9 board-specific support | ||
| 46 | obj-$(CONFIG_MACH_AT91CAP9ADK) += board-cap9adk.o | ||
| 47 | |||
| 45 | # AT91X40 board-specific support | 48 | # AT91X40 board-specific support |
| 46 | obj-$(CONFIG_MACH_AT91EB01) += board-eb01.o | 49 | obj-$(CONFIG_MACH_AT91EB01) += board-eb01.o |
| 47 | 50 | ||
diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c new file mode 100644 index 000000000000..185437131541 --- /dev/null +++ b/arch/arm/mach-at91/board-cap9adk.c | |||
| @@ -0,0 +1,359 @@ | |||
| 1 | /* | ||
| 2 | * linux/arch/arm/mach-at91/board-cap9adk.c | ||
| 3 | * | ||
| 4 | * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com> | ||
| 5 | * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com> | ||
| 6 | * Copyright (C) 2005 SAN People | ||
| 7 | * Copyright (C) 2007 Atmel Corporation. | ||
| 8 | * | ||
| 9 | * This program is free software; you can redistribute it and/or modify | ||
| 10 | * it under the terms of the GNU General Public License as published by | ||
| 11 | * the Free Software Foundation; either version 2 of the License, or | ||
| 12 | * (at your option) any later version. | ||
| 13 | * | ||
| 14 | * This program is distributed in the hope that it will be useful, | ||
| 15 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | ||
| 16 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | ||
| 17 | * GNU General Public License for more details. | ||
| 18 | * | ||
| 19 | * You should have received a copy of the GNU General Public License | ||
| 20 | * along with this program; if not, write to the Free Software | ||
| 21 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | ||
| 22 | */ | ||
| 23 | |||
| 24 | #include <linux/types.h> | ||
| 25 | #include <linux/init.h> | ||
| 26 | #include <linux/mm.h> | ||
| 27 | #include <linux/module.h> | ||
| 28 | #include <linux/platform_device.h> | ||
| 29 | #include <linux/spi/spi.h> | ||
| 30 | #include <linux/spi/ads7846.h> | ||
| 31 | #include <linux/fb.h> | ||
| 32 | #include <linux/mtd/physmap.h> | ||
| 33 | |||
| 34 | #include <video/atmel_lcdc.h> | ||
| 35 | |||
| 36 | #include <asm/hardware.h> | ||
| 37 | #include <asm/setup.h> | ||
| 38 | #include <asm/mach-types.h> | ||
| 39 | #include <asm/irq.h> | ||
| 40 | |||
| 41 | #include <asm/mach/arch.h> | ||
| 42 | #include <asm/mach/map.h> | ||
| 43 | #include <asm/mach/irq.h> | ||
| 44 | |||
| 45 | #include <asm/arch/board.h> | ||
| 46 | #include <asm/arch/gpio.h> | ||
| 47 | #include <asm/arch/at91cap9_matrix.h> | ||
| 48 | #include <asm/arch/at91sam926x_mc.h> | ||
| 49 | |||
| 50 | #include "generic.h" | ||
| 51 | |||
| 52 | |||
| 53 | static void __init cap9adk_map_io(void) | ||
| 54 | { | ||
| 55 | /* Initialize processor: 12 MHz crystal */ | ||
| 56 | at91cap9_initialize(12000000); | ||
| 57 | |||
| 58 | /* Setup the LEDs: USER1 and USER2 LED for cpu/timer... */ | ||
| 59 | at91_init_leds(AT91_PIN_PA10, AT91_PIN_PA11); | ||
| 60 | /* ... POWER LED always on */ | ||
| 61 | at91_set_gpio_output(AT91_PIN_PC29, 1); | ||
| 62 | |||
| 63 | /* Setup the serial ports and console */ | ||
| 64 | at91_register_uart(0, 0, 0); /* DBGU = ttyS0 */ | ||
| 65 | at91_set_serial_console(0); | ||
| 66 | } | ||
| 67 | |||
| 68 | static void __init cap9adk_init_irq(void) | ||
| 69 | { | ||
| 70 | at91cap9_init_interrupts(NULL); | ||
| 71 | } | ||
| 72 | |||
| 73 | |||
| 74 | /* | ||
| 75 | * USB Host port | ||
| 76 | */ | ||
| 77 | static struct at91_usbh_data __initdata cap9adk_usbh_data = { | ||
| 78 | .ports = 2, | ||
| 79 | }; | ||
| 80 | |||
| 81 | |||
| 82 | /* | ||
| 83 | * ADS7846 Touchscreen | ||
| 84 | */ | ||
| 85 | #if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) | ||
| 86 | static int ads7843_pendown_state(void) | ||
| 87 | { | ||
| 88 | return !at91_get_gpio_value(AT91_PIN_PC4); /* Touchscreen PENIRQ */ | ||
| 89 | } | ||
| 90 | |||
| 91 | static struct ads7846_platform_data ads_info = { | ||
| 92 | .model = 7843, | ||
| 93 | .x_min = 150, | ||
| 94 | .x_max = 3830, | ||
| 95 | .y_min = 190, | ||
| 96 | .y_max = 3830, | ||
| 97 | .vref_delay_usecs = 100, | ||
| 98 | .x_plate_ohms = 450, | ||
| 99 | .y_plate_ohms = 250, | ||
| 100 | .pressure_max = 15000, | ||
| 101 | .debounce_max = 1, | ||
| 102 | .debounce_rep = 0, | ||
| 103 | .debounce_tol = (~0), | ||
| 104 | .get_pendown_state = ads7843_pendown_state, | ||
| 105 | }; | ||
| 106 | |||
| 107 | static void __init cap9adk_add_device_ts(void) | ||
| 108 | { | ||
| 109 | at91_set_gpio_input(AT91_PIN_PC4, 1); /* Touchscreen PENIRQ */ | ||
| 110 | at91_set_gpio_input(AT91_PIN_PC5, 1); /* Touchscreen BUSY */ | ||
| 111 | } | ||
| 112 | #else | ||
| 113 | static void __init cap9adk_add_device_ts(void) {} | ||
| 114 | #endif | ||
| 115 | |||
| 116 | |||
| 117 | /* | ||
| 118 | * SPI devices. | ||
| 119 | */ | ||
| 120 | static struct spi_board_info cap9adk_spi_devices[] = { | ||
| 121 | #if defined(CONFIG_MTD_AT91_DATAFLASH_CARD) | ||
| 122 | { /* DataFlash card */ | ||
| 123 | .modalias = "mtd_dataflash", | ||
| 124 | .chip_select = 0, | ||
| 125 | .max_speed_hz = 15 * 1000 * 1000, | ||
| 126 | .bus_num = 0, | ||
| 127 | }, | ||
| 128 | #endif | ||
| 129 | #if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) | ||
| 130 | { | ||
| 131 | .modalias = "ads7846", | ||
| 132 | .chip_select = 3, /* can be 2 or 3, depending on J2 jumper */ | ||
| 133 | .max_speed_hz = 125000 * 26, /* (max sample rate @ 3V) * (cmd + data + overhead) */ | ||
| 134 | .bus_num = 0, | ||
| 135 | .platform_data = &ads_info, | ||
| 136 | .irq = AT91_PIN_PC4, | ||
| 137 | }, | ||
| 138 | #endif | ||
| 139 | }; | ||
| 140 | |||
| 141 | |||
| 142 | /* | ||
| 143 | * MCI (SD/MMC) | ||
| 144 | */ | ||
| 145 | static struct at91_mmc_data __initdata cap9adk_mmc_data = { | ||
| 146 | .wire4 = 1, | ||
| 147 | // .det_pin = ... not connected | ||
| 148 | // .wp_pin = ... not connected | ||
| 149 | // .vcc_pin = ... not connected | ||
| 150 | }; | ||
| 151 | |||
| 152 | |||
| 153 | /* | ||
| 154 | * MACB Ethernet device | ||
| 155 | */ | ||
| 156 | static struct at91_eth_data __initdata cap9adk_macb_data = { | ||
| 157 | .is_rmii = 1, | ||
| 158 | }; | ||
| 159 | |||
| 160 | |||
| 161 | /* | ||
| 162 | * NAND flash | ||
| 163 | */ | ||
| 164 | static struct mtd_partition __initdata cap9adk_nand_partitions[] = { | ||
| 165 | { | ||
| 166 | .name = "NAND partition", | ||
| 167 | .offset = 0, | ||
| 168 | .size = MTDPART_SIZ_FULL, | ||
| 169 | }, | ||
| 170 | }; | ||
| 171 | |||
| 172 | static struct mtd_partition * __init nand_partitions(int size, int *num_partitions) | ||
| 173 | { | ||
| 174 | *num_partitions = ARRAY_SIZE(cap9adk_nand_partitions); | ||
| 175 | return cap9adk_nand_partitions; | ||
| 176 | } | ||
| 177 | |||
| 178 | static struct at91_nand_data __initdata cap9adk_nand_data = { | ||
| 179 | .ale = 21, | ||
| 180 | .cle = 22, | ||
| 181 | // .det_pin = ... not connected | ||
| 182 | // .rdy_pin = ... not connected | ||
| 183 | .enable_pin = AT91_PIN_PD15, | ||
| 184 | .partition_info = nand_partitions, | ||
| 185 | #if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16) | ||
| 186 | .bus_width_16 = 1, | ||
| 187 | #else | ||
| 188 | .bus_width_16 = 0, | ||
| 189 | #endif | ||
| 190 | }; | ||
| 191 | |||
| 192 | |||
| 193 | /* | ||
| 194 | * NOR flash | ||
| 195 | */ | ||
| 196 | static struct mtd_partition cap9adk_nor_partitions[] = { | ||
| 197 | { | ||
| 198 | .name = "NOR partition", | ||
| 199 | .offset = 0, | ||
| 200 | .size = MTDPART_SIZ_FULL, | ||
| 201 | }, | ||
| 202 | }; | ||
| 203 | |||
| 204 | static struct physmap_flash_data cap9adk_nor_data = { | ||
| 205 | .width = 2, | ||
| 206 | .parts = cap9adk_nor_partitions, | ||
| 207 | .nr_parts = ARRAY_SIZE(cap9adk_nor_partitions), | ||
| 208 | }; | ||
| 209 | |||
| 210 | #define NOR_BASE AT91_CHIPSELECT_0 | ||
| 211 | #define NOR_SIZE 0x800000 | ||
| 212 | |||
| 213 | static struct resource nor_flash_resources[] = { | ||
| 214 | { | ||
| 215 | .start = NOR_BASE, | ||
| 216 | .end = NOR_BASE + NOR_SIZE - 1, | ||
| 217 | .flags = IORESOURCE_MEM, | ||
| 218 | } | ||
| 219 | }; | ||
| 220 | |||
| 221 | static struct platform_device cap9adk_nor_flash = { | ||
| 222 | .name = "physmap-flash", | ||
| 223 | .id = 0, | ||
| 224 | .dev = { | ||
| 225 | .platform_data = &cap9adk_nor_data, | ||
| 226 | }, | ||
| 227 | .resource = nor_flash_resources, | ||
| 228 | .num_resources = ARRAY_SIZE(nor_flash_resources), | ||
| 229 | }; | ||
| 230 | |||
| 231 | static __init void cap9adk_add_device_nor(void) | ||
| 232 | { | ||
| 233 | unsigned long csa; | ||
| 234 | |||
| 235 | csa = at91_sys_read(AT91_MATRIX_EBICSA); | ||
| 236 | at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_VDDIOMSEL_3_3V); | ||
| 237 | |||
| 238 | /* set the bus interface characteristics */ | ||
| 239 | at91_sys_write(AT91_SMC_SETUP(0), AT91_SMC_NWESETUP_(4) | AT91_SMC_NCS_WRSETUP_(2) | ||
| 240 | | AT91_SMC_NRDSETUP_(4) | AT91_SMC_NCS_RDSETUP_(2)); | ||
| 241 | |||
| 242 | at91_sys_write(AT91_SMC_PULSE(0), AT91_SMC_NWEPULSE_(8) | AT91_SMC_NCS_WRPULSE_(10) | ||
| 243 | | AT91_SMC_NRDPULSE_(8) | AT91_SMC_NCS_RDPULSE_(10)); | ||
| 244 | |||
| 245 | at91_sys_write(AT91_SMC_CYCLE(0), AT91_SMC_NWECYCLE_(16) | AT91_SMC_NRDCYCLE_(16)); | ||
| 246 | |||
| 247 | at91_sys_write(AT91_SMC_MODE(0), AT91_SMC_READMODE | AT91_SMC_WRITEMODE | ||
| 248 | | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE | ||
| 249 | | AT91_SMC_DBW_16 | AT91_SMC_TDF_(1)); | ||
| 250 | |||
| 251 | platform_device_register(&cap9adk_nor_flash); | ||
| 252 | } | ||
| 253 | |||
| 254 | |||
| 255 | /* | ||
| 256 | * LCD Controller | ||
| 257 | */ | ||
| 258 | #if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE) | ||
| 259 | static struct fb_videomode at91_tft_vga_modes[] = { | ||
| 260 | { | ||
| 261 | .name = "TX09D50VM1CCA @ 60", | ||
| 262 | .refresh = 60, | ||
| 263 | .xres = 240, .yres = 320, | ||
| 264 | .pixclock = KHZ2PICOS(4965), | ||
| 265 | |||
| 266 | .left_margin = 1, .right_margin = 33, | ||
| 267 | .upper_margin = 1, .lower_margin = 0, | ||
| 268 | .hsync_len = 5, .vsync_len = 1, | ||
| 269 | |||
| 270 | .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, | ||
| 271 | .vmode = FB_VMODE_NONINTERLACED, | ||
| 272 | }, | ||
| 273 | }; | ||
| 274 | |||
| 275 | static struct fb_monspecs at91fb_default_monspecs = { | ||
| 276 | .manufacturer = "HIT", | ||
| 277 | .monitor = "TX09D70VM1CCA", | ||
| 278 | |||
| 279 | .modedb = at91_tft_vga_modes, | ||
| 280 | .modedb_len = ARRAY_SIZE(at91_tft_vga_modes), | ||
| 281 | .hfmin = 15000, | ||
| 282 | .hfmax = 64000, | ||
| 283 | .vfmin = 50, | ||
| 284 | .vfmax = 150, | ||
| 285 | }; | ||
| 286 | |||
| 287 | #define AT91CAP9_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \ | ||
| 288 | | ATMEL_LCDC_DISTYPE_TFT \ | ||
| 289 | | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE) | ||
| 290 | |||
| 291 | static void at91_lcdc_power_control(int on) | ||
| 292 | { | ||
| 293 | if (on) | ||
| 294 | at91_set_gpio_value(AT91_PIN_PC0, 0); /* power up */ | ||
| 295 | else | ||
| 296 | at91_set_gpio_value(AT91_PIN_PC0, 1); /* power down */ | ||
| 297 | } | ||
| 298 | |||
| 299 | /* Driver datas */ | ||
| 300 | static struct atmel_lcdfb_info __initdata cap9adk_lcdc_data = { | ||
| 301 | .default_bpp = 16, | ||
| 302 | .default_dmacon = ATMEL_LCDC_DMAEN, | ||
| 303 | .default_lcdcon2 = AT91CAP9_DEFAULT_LCDCON2, | ||
| 304 | .default_monspecs = &at91fb_default_monspecs, | ||
| 305 | .atmel_lcdfb_power_control = at91_lcdc_power_control, | ||
| 306 | .guard_time = 1, | ||
| 307 | }; | ||
| 308 | |||
| 309 | #else | ||
| 310 | static struct atmel_lcdfb_info __initdata cap9adk_lcdc_data; | ||
| 311 | #endif | ||
| 312 | |||
| 313 | |||
| 314 | /* | ||
| 315 | * AC97 | ||
| 316 | */ | ||
| 317 | static struct atmel_ac97_data cap9adk_ac97_data = { | ||
| 318 | // .reset_pin = ... not connected | ||
| 319 | }; | ||
| 320 | |||
| 321 | |||
| 322 | static void __init cap9adk_board_init(void) | ||
| 323 | { | ||
| 324 | /* Serial */ | ||
| 325 | at91_add_device_serial(); | ||
| 326 | /* USB Host */ | ||
| 327 | set_irq_type(AT91CAP9_ID_UHP, IRQT_HIGH); | ||
| 328 | at91_add_device_usbh(&cap9adk_usbh_data); | ||
| 329 | /* SPI */ | ||
| 330 | at91_add_device_spi(cap9adk_spi_devices, ARRAY_SIZE(cap9adk_spi_devices)); | ||
| 331 | /* Touchscreen */ | ||
| 332 | cap9adk_add_device_ts(); | ||
| 333 | /* MMC */ | ||
| 334 | at91_add_device_mmc(1, &cap9adk_mmc_data); | ||
| 335 | /* Ethernet */ | ||
| 336 | at91_add_device_eth(&cap9adk_macb_data); | ||
| 337 | /* NAND */ | ||
| 338 | at91_add_device_nand(&cap9adk_nand_data); | ||
| 339 | /* NOR Flash */ | ||
| 340 | cap9adk_add_device_nor(); | ||
| 341 | /* I2C */ | ||
| 342 | at91_add_device_i2c(NULL, 0); | ||
| 343 | /* LCD Controller */ | ||
| 344 | set_irq_type(AT91CAP9_ID_LCDC, IRQT_HIGH); | ||
| 345 | at91_add_device_lcdc(&cap9adk_lcdc_data); | ||
| 346 | /* AC97 */ | ||
| 347 | at91_add_device_ac97(&cap9adk_ac97_data); | ||
| 348 | } | ||
| 349 | |||
| 350 | MACHINE_START(AT91CAP9ADK, "Atmel AT91CAP9A-DK") | ||
| 351 | /* Maintainer: Stelian Pop <stelian.pop@leadtechdesign.com> */ | ||
| 352 | .phys_io = AT91_BASE_SYS, | ||
| 353 | .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, | ||
| 354 | .boot_params = AT91_SDRAM_BASE + 0x100, | ||
| 355 | .timer = &at91sam926x_timer, | ||
| 356 | .map_io = cap9adk_map_io, | ||
| 357 | .init_irq = cap9adk_init_irq, | ||
| 358 | .init_machine = cap9adk_board_init, | ||
| 359 | MACHINE_END | ||
