1 files changed, 13 insertions, 3 deletions

diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index 68c7f6cfd728..a88699051136 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -897,11 +897,21 @@ static void sci_shutdown(struct uart_port *port)
 static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
                             struct ktermios *old)
 {
-        unsigned int status, baud, smr_val;
+        unsigned int status, baud, smr_val, max_baud;
         int t = -1;
 
-        baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
-        if (likely(baud))
+        /*
+         * earlyprintk comes here early on with port->uartclk set to zero.
+         * the clock framework is not up and running at this point so here
+         * we assume that 115200 is the maximum baud rate. please note that
+         * the baud rate is not programmed during earlyprintk - it is assumed
+         * that the previous boot loader has enabled required clocks and
+         * setup the baud rate generator hardware for us already.
+         */
+        max_baud = port->uartclk ? port->uartclk / 16 : 115200;
+
+        baud = uart_get_baud_rate(port, termios, old, 0, max_baud);
+        if (likely(baud && port->uartclk))
                 t = SCBRR_VALUE(baud, port->uartclk);
 
         do {