1 files changed, 52 insertions, 53 deletions

diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c
index 38fd8623a444..96df2885728f 100644
--- a/drivers/net/wireless/orinoco.c
+++ b/drivers/net/wireless/orinoco.c
@@ -619,7 +619,9 @@ struct hermes_tx_descriptor_802_11 {
         u16 ethertype;
 } __attribute__ ((packed));
 
+/* Rx frame header except compatibility 802.3 header */
 struct hermes_rx_descriptor {
+        /* Control */
         u16 status;
         u32 time;
         u8 silence;
@@ -627,6 +629,18 @@ struct hermes_rx_descriptor {
         u8 rate;
         u8 rxflow;
         u32 reserved;
+
+        /* 802.11 header */
+        u16 frame_ctl;
+        u16 duration_id;
+        u8 addr1[ETH_ALEN];
+        u8 addr2[ETH_ALEN];
+        u8 addr3[ETH_ALEN];
+        u16 seq_ctl;
+        u8 addr4[ETH_ALEN];
+
+        /* Data length */
+        u16 data_len;
 } __attribute__ ((packed));
 
 /********************************************************************/
@@ -1110,12 +1124,10 @@ static void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw)
         struct net_device_stats *stats = &priv->stats;
         struct iw_statistics *wstats = &priv->wstats;
         struct sk_buff *skb = NULL;
-        u16 rxfid, status;
-        int length, data_len, data_off;
-        char *p;
+        u16 rxfid, status, fc;
+        int length;
         struct hermes_rx_descriptor desc;
-        struct header_struct hdr;
-        struct ethhdr *eh;
+        struct ethhdr *hdr;
         int err;
 
         rxfid = hermes_read_regn(hw, RXFID);
@@ -1140,24 +1152,14 @@ static void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw)
                         stats->rx_crc_errors++;
                         DEBUG(1, "%s: Bad CRC on Rx. Frame dropped.\n", dev->name);
                 }
-                stats->rx_errors++;
-                goto drop;
-        }
 
-        /* For now we ignore the 802.11 header completely, assuming
-           that the card's firmware has handled anything vital */
-
-        err = hermes_bap_pread(hw, IRQ_BAP, &hdr, sizeof(hdr),
-                               rxfid, HERMES_802_3_OFFSET);
-        if (err) {
-                printk(KERN_ERR "%s: error %d reading frame header. "
-                       "Frame dropped.\n", dev->name, err);
                 stats->rx_errors++;
                 goto drop;
         }
 
-        length = ntohs(hdr.len);
-        
+        length = le16_to_cpu(desc.data_len);
+        fc = le16_to_cpu(desc.frame_ctl);
+
         /* Sanity checks */
         if (length < 3) { /* No for even an 802.2 LLC header */
                 /* At least on Symbol firmware with PCF we get quite a
@@ -1186,57 +1188,51 @@ static void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw)
                 goto drop;
         }
 
-        skb_reserve(skb, 2); /* This way the IP header is aligned */
+        /* We'll prepend the header, so reserve space for it.  The worst
+           case is no decapsulation, when 802.3 header is prepended and
+           nothing is removed.  2 is for aligning the IP header.  */
+        skb_reserve(skb, ETH_HLEN + 2);
+
+        err = hermes_bap_pread(hw, IRQ_BAP, skb_put(skb, length),
+                               ALIGN(length, 2), rxfid,
+                               HERMES_802_2_OFFSET);
+        if (err) {
+                printk(KERN_ERR "%s: error %d reading frame. "
+                       "Frame dropped.\n", dev->name, err);
+                stats->rx_errors++;
+                goto drop;
+        }
 
         /* Handle decapsulation
          * In most cases, the firmware tell us about SNAP frames.
          * For some reason, the SNAP frames sent by LinkSys APs
          * are not properly recognised by most firmwares.
          * So, check ourselves */
-        if (((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_1042) ||
-            ((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_TUNNEL) ||
-            is_ethersnap(&hdr)) {
+        if (length >= ENCAPS_OVERHEAD &&
+            (((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_1042) ||
+             ((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_TUNNEL) ||
+             is_ethersnap(skb->data))) {
                 /* These indicate a SNAP within 802.2 LLC within
                    802.11 frame which we'll need to de-encapsulate to
                    the original EthernetII frame. */
-
-                if (length < ENCAPS_OVERHEAD) { /* No room for full LLC+SNAP */
-                        stats->rx_length_errors++;
-                        goto drop;
-                }
-
-                /* Remove SNAP header, reconstruct EthernetII frame */
-                data_len = length - ENCAPS_OVERHEAD;
-                data_off = HERMES_802_3_OFFSET + sizeof(hdr);
-
-                eh = (struct ethhdr *)skb_put(skb, ETH_HLEN);
-
-                memcpy(eh, &hdr, 2 * ETH_ALEN);
-                eh->h_proto = hdr.ethertype;
+                hdr = (struct ethhdr *)skb_push(skb, ETH_HLEN - ENCAPS_OVERHEAD);
         } else {
-                /* All other cases indicate a genuine 802.3 frame.  No
-                   decapsulation needed.  We just throw the whole
-                   thing in, and hope the protocol layer can deal with
-                   it as 802.3 */
-                data_len = length;
-                data_off = HERMES_802_3_OFFSET;
-                /* FIXME: we re-read from the card data we already read here */
-        }
-
-        p = skb_put(skb, data_len);
-        err = hermes_bap_pread(hw, IRQ_BAP, p, ALIGN(data_len, 2),
-                               rxfid, data_off);
-        if (err) {
-                printk(KERN_ERR "%s: error %d reading frame. "
-                       "Frame dropped.\n", dev->name, err);
-                stats->rx_errors++;
-                goto drop;
+                /* 802.3 frame - prepend 802.3 header as is */
+                hdr = (struct ethhdr *)skb_push(skb, ETH_HLEN);
+                hdr->h_proto = htons(length);
         }
+        memcpy(hdr->h_dest, desc.addr1, ETH_ALEN);
+        if (fc & IEEE80211_FCTL_FROMDS)
+                memcpy(hdr->h_source, desc.addr3, ETH_ALEN);
+        else
+                memcpy(hdr->h_source, desc.addr2, ETH_ALEN);
 
         dev->last_rx = jiffies;
         skb->dev = dev;
         skb->protocol = eth_type_trans(skb, dev);
         skb->ip_summed = CHECKSUM_NONE;
+        if (fc & IEEE80211_FCTL_TODS)
+                skb->pkt_type = PACKET_OTHERHOST;
         
         /* Process the wireless stats if needed */
         orinoco_stat_gather(dev, skb, &desc);
@@ -1457,6 +1453,9 @@ static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw)
                 u16 newstatus;
                 int connected;
 
+                if (priv->iw_mode == IW_MODE_MONITOR)
+                        break;
+
                 if (len != sizeof(linkstatus)) {
                         printk(KERN_WARNING "%s: Unexpected size for linkstatus frame (%d bytes)\n",
                                dev->name, len);