18 files changed, 116 insertions, 23 deletions

diff --git a/Documentation/gpio.txt b/Documentation/gpio.txt
index 8b69811a9642..18022e249c53 100644
--- a/Documentation/gpio.txt
+++ b/Documentation/gpio.txt
@@ -389,11 +389,21 @@ either NULL or the label associated with that GPIO when it was requested.
 
 Platform Support
 ----------------
-To support this framework, a platform's Kconfig will "select HAVE_GPIO_LIB"
+To support this framework, a platform's Kconfig will "select" either
+ARCH_REQUIRE_GPIOLIB or ARCH_WANT_OPTIONAL_GPIOLIB
 and arrange that its <asm/gpio.h> includes <asm-generic/gpio.h> and defines
 three functions: gpio_get_value(), gpio_set_value(), and gpio_cansleep().
 They may also want to provide a custom value for ARCH_NR_GPIOS.
 
+ARCH_REQUIRE_GPIOLIB means that the gpio-lib code will always get compiled
+into the kernel on that architecture.
+
+ARCH_WANT_OPTIONAL_GPIOLIB means the gpio-lib code defaults to off and the user
+can enable it and build it into the kernel optionally.
+
+If neither of these options are selected, the platform does not support
+GPIOs through GPIO-lib and the code cannot be enabled by the user.
+
 Trivial implementations of those functions can directly use framework
 code, which always dispatches through the gpio_chip:
 
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 6fb4f03369f2..dabb015aa40b 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -268,7 +268,7 @@ config ARCH_EP93XX
         select GENERIC_GPIO
         select HAVE_CLK
         select HAVE_CLK
-        select HAVE_GPIO_LIB
+        select ARCH_REQUIRE_GPIOLIB
         help
           This enables support for the Cirrus EP93xx series of CPUs.
 
@@ -447,7 +447,7 @@ config ARCH_PXA
         select ARCH_MTD_XIP
         select GENERIC_GPIO
         select HAVE_CLK
-        select HAVE_GPIO_LIB
+        select ARCH_REQUIRE_GPIOLIB
         select GENERIC_TIME
         select GENERIC_CLOCKEVENTS
         select TICK_ONESHOT
@@ -479,7 +479,7 @@ config ARCH_SA1100
         select GENERIC_CLOCKEVENTS
         select HAVE_CLK
         select TICK_ONESHOT
-        select HAVE_GPIO_LIB
+        select ARCH_REQUIRE_GPIOLIB
         help
           Support for StrongARM 11x0 based boards.
 
@@ -522,7 +522,7 @@ config ARCH_OMAP
         bool "TI OMAP"
         select GENERIC_GPIO
         select HAVE_CLK
-        select HAVE_GPIO_LIB
+        select ARCH_REQUIRE_GPIOLIB
         select GENERIC_TIME
         select GENERIC_CLOCKEVENTS
         help
diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
index df4adefedb42..7c239a916275 100644
--- a/arch/avr32/Kconfig
+++ b/arch/avr32/Kconfig
@@ -88,7 +88,7 @@ config PLATFORM_AT32AP
         select SUBARCH_AVR32B
         select MMU
         select PERFORMANCE_COUNTERS
-        select HAVE_GPIO_LIB
+        select ARCH_REQUIRE_GPIOLIB
         select GENERIC_ALLOCATOR
 
 #
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index b9c754f4070c..b4c4eaa5dd26 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -713,7 +713,7 @@ config CSRC_SB1250
 
 config GPIO_TXX9
         select GENERIC_GPIO
-        select HAVE_GPIO_LIB
+        select ARCH_REQUIRE_GPIOLIB
         bool
 
 config CFE
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index de6b49cd6be8..fe88418167c5 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -110,6 +110,7 @@ config PPC
         default y
         select HAVE_DYNAMIC_FTRACE
         select HAVE_FTRACE
+        select ARCH_WANT_OPTIONAL_GPIOLIB
         select HAVE_IDE
         select HAVE_IOREMAP_PROT
         select HAVE_EFFICIENT_UNALIGNED_ACCESS
diff --git a/arch/powerpc/platforms/52xx/Kconfig b/arch/powerpc/platforms/52xx/Kconfig
index d664b1bce381..ccbd4958412e 100644
--- a/arch/powerpc/platforms/52xx/Kconfig
+++ b/arch/powerpc/platforms/52xx/Kconfig
@@ -48,6 +48,6 @@ config PPC_MPC5200_BUGFIX
 config PPC_MPC5200_GPIO
         bool "MPC5200 GPIO support"
         depends on PPC_MPC52xx
-        select HAVE_GPIO_LIB
+        select ARCH_REQUIRE_GPIOLIB
         help
           Enable gpiolib support for mpc5200 based boards
diff --git a/arch/powerpc/sysdev/qe_lib/Kconfig b/arch/powerpc/sysdev/qe_lib/Kconfig
index 4bb18f57901e..1ce546462be5 100644
--- a/arch/powerpc/sysdev/qe_lib/Kconfig
+++ b/arch/powerpc/sysdev/qe_lib/Kconfig
@@ -29,7 +29,7 @@ config QE_GPIO
         bool "QE GPIO support"
         depends on QUICC_ENGINE
         select GENERIC_GPIO
-        select HAVE_GPIO_LIB
+        select ARCH_REQUIRE_GPIOLIB
         help
           Say Y here if you're going to use hardware that connects to the
           QE GPIOs.
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 66f3ab05b18c..e3cba0b45600 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -23,6 +23,7 @@ config X86
         select HAVE_OPROFILE
         select HAVE_IOREMAP_PROT
         select HAVE_KPROBES
+        select ARCH_WANT_OPTIONAL_GPIOLIB if !X86_RDC321X
         select HAVE_KRETPROBES
         select HAVE_DYNAMIC_FTRACE
         select HAVE_FTRACE
diff --git a/drivers/Makefile b/drivers/Makefile
index 808e0ae66aa8..54ec5e718c0e 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -5,7 +5,7 @@
 # Rewritten to use lists instead of if-statements.
 #
 
-obj-$(CONFIG_HAVE_GPIO_LIB)     += gpio/
+obj-y                           += gpio/
 obj-$(CONFIG_PCI)               += pci/
 obj-$(CONFIG_PARISC)            += parisc/
 obj-$(CONFIG_RAPIDIO)           += rapidio/
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index de202dbe5300..5a355f829167 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -2,15 +2,40 @@
 # GPIO infrastructure and expanders
 #
 
-config HAVE_GPIO_LIB
+config ARCH_WANT_OPTIONAL_GPIOLIB
         bool
         help
+          Select this config option from the architecture Kconfig, if
+          it is possible to use gpiolib on the architecture, but let the
+          user decide whether to actually build it or not.
+          Select this instead of ARCH_REQUIRE_GPIOLIB, if your architecture does
+          not depend on GPIOs being available, but rather let the user
+          decide whether he needs it or not.
+
+config ARCH_REQUIRE_GPIOLIB
+        bool
+        select GPIOLIB
+        help
           Platforms select gpiolib if they use this infrastructure
           for all their GPIOs, usually starting with ones integrated
           into SOC processors.
+          Selecting this from the architecture code will cause the gpiolib
+          code to always get built in.
+
+
+
+menuconfig GPIOLIB
+        bool "GPIO Support"
+        depends on ARCH_WANT_OPTIONAL_GPIOLIB || ARCH_REQUIRE_GPIOLIB
+        select GENERIC_GPIO
+        help
+          This enables GPIO support through the generic GPIO library.
+          You only need to enable this, if you also want to enable
+          one or more of the GPIO expansion card drivers below.
+
+          If unsure, say N.
 
-menu "GPIO Support"
-        depends on HAVE_GPIO_LIB
+if GPIOLIB
 
 config DEBUG_GPIO
         bool "Debug GPIO calls"
@@ -116,4 +141,4 @@ config GPIO_MCP23S08
           SPI driver for Microchip MCP23S08 I/O expander.  This provides
           a GPIO interface supporting inputs and outputs.
 
-endmenu
+endif
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index eeb2f2b20282..8c45948d1fe7 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -2,7 +2,7 @@
 
 ccflags-$(CONFIG_DEBUG_GPIO)    += -DDEBUG
 
-obj-$(CONFIG_HAVE_GPIO_LIB)     += gpiolib.o
+obj-$(CONFIG_GPIOLIB)           += gpiolib.o
 
 obj-$(CONFIG_GPIO_MAX7301)      += max7301.o
 obj-$(CONFIG_GPIO_MCP23S08)     += mcp23s08.o
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
index 50e0a4653741..a95cb9465d65 100644
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
@@ -126,7 +126,7 @@ config ISP1301_OMAP
 
 config TPS65010
         tristate "TPS6501x Power Management chips"
-        depends on HAVE_GPIO_LIB
+        depends on GPIOLIB
         default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK
         help
           If you say yes here you get support for the TPS6501x series of
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index bac9e973ece0..1f57a99fd968 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -36,7 +36,7 @@ config MFD_ASIC3
 
 config HTC_EGPIO
         bool "HTC EGPIO support"
-        depends on GENERIC_HARDIRQS && HAVE_GPIO_LIB && ARM
+        depends on GENERIC_HARDIRQS && GPIOLIB && ARM
         help
             This driver supports the CPLD egpio chip present on
             several HTC phones.  It provides basic support for input
@@ -52,7 +52,7 @@ config HTC_PASIC3
 
 config MFD_TC6393XB
         bool "Support Toshiba TC6393XB"
-        depends on HAVE_GPIO_LIB
+        depends on GPIOLIB
         select MFD_CORE
         help
           Support for Toshiba Mobile IO Controller TC6393XB
diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig
index 3a7a11a75fb4..1d7ec3129349 100644
--- a/drivers/of/Kconfig
+++ b/drivers/of/Kconfig
@@ -4,7 +4,7 @@ config OF_DEVICE
 
 config OF_GPIO
         def_bool y
-        depends on OF && PPC_OF && HAVE_GPIO_LIB
+        depends on OF && PPC_OF && GPIOLIB
         help
           OpenFirmware GPIO accessors
 
diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h
index 1beff5166e53..a3034d20ebd5 100644
--- a/include/asm-generic/gpio.h
+++ b/include/asm-generic/gpio.h
@@ -3,7 +3,7 @@
 
 #include <linux/types.h>
 
-#ifdef CONFIG_HAVE_GPIO_LIB
+#ifdef CONFIG_GPIOLIB
 
 #include <linux/compiler.h>
 
diff --git a/include/asm-mips/mach-generic/gpio.h b/include/asm-mips/mach-generic/gpio.h
index e6b376bd9d06..b4e70208da64 100644
--- a/include/asm-mips/mach-generic/gpio.h
+++ b/include/asm-mips/mach-generic/gpio.h
@@ -1,7 +1,7 @@
 #ifndef __ASM_MACH_GENERIC_GPIO_H
 #define __ASM_MACH_GENERIC_GPIO_H
 
-#ifdef CONFIG_HAVE_GPIO_LIB
+#ifdef CONFIG_GPIOLIB
 #define gpio_get_value  __gpio_get_value
 #define gpio_set_value  __gpio_set_value
 #define gpio_cansleep   __gpio_cansleep
diff --git a/include/asm-powerpc/gpio.h b/include/asm-powerpc/gpio.h
index 77ad3a890f30..ea04632399d8 100644
--- a/include/asm-powerpc/gpio.h
+++ b/include/asm-powerpc/gpio.h
@@ -17,7 +17,7 @@
 #include <linux/errno.h>
 #include <asm-generic/gpio.h>
 
-#ifdef CONFIG_HAVE_GPIO_LIB
+#ifdef CONFIG_GPIOLIB
 
 /*
  * We don't (yet) implement inlined/rapid versions for on-chip gpios.
@@ -51,6 +51,6 @@ static inline int irq_to_gpio(unsigned int irq)
         return -EINVAL;
 }
 
-#endif /* CONFIG_HAVE_GPIO_LIB */
+#endif /* CONFIG_GPIOLIB */
 
 #endif /* __ASM_POWERPC_GPIO_H */
diff --git a/include/asm-x86/gpio.h b/include/asm-x86/gpio.h
index ff87fca0caf9..116e9147fe66 100644
--- a/include/asm-x86/gpio.h
+++ b/include/asm-x86/gpio.h
@@ -1,6 +1,62 @@
+/*
+ * Generic GPIO API implementation for x86.
+ *
+ * Derived from the generic GPIO API for powerpc:
+ *
+ * Copyright (c) 2007-2008  MontaVista Software, Inc.
+ *
+ * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
 #ifndef _ASM_I386_GPIO_H
 #define _ASM_I386_GPIO_H
 
+#ifdef CONFIG_X86_RDC321X
 #include <gpio.h>
+#else /* CONFIG_X86_RDC321X */
+
+#include <asm-generic/gpio.h>
+
+#ifdef CONFIG_GPIOLIB
+
+/*
+ * Just call gpiolib.
+ */
+static inline int gpio_get_value(unsigned int gpio)
+{
+        return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned int gpio, int value)
+{
+        __gpio_set_value(gpio, value);
+}
+
+static inline int gpio_cansleep(unsigned int gpio)
+{
+        return __gpio_cansleep(gpio);
+}
+
+/*
+ * Not implemented, yet.
+ */
+static inline int gpio_to_irq(unsigned int gpio)
+{
+        return -ENOSYS;
+}
+
+static inline int irq_to_gpio(unsigned int irq)
+{
+        return -EINVAL;
+}
+
+#endif /* CONFIG_GPIOLIB */
+
+#endif /* CONFIG_X86_RDC321X */
 
 #endif /* _ASM_I386_GPIO_H */