diff options
-rw-r--r-- | drivers/ata/pata_via.c | 204 |
1 files changed, 94 insertions, 110 deletions
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c index 82e75a1f1b95..6356377231fd 100644 --- a/drivers/ata/pata_via.c +++ b/drivers/ata/pata_via.c | |||
@@ -22,6 +22,7 @@ | |||
22 | * VIA VT8233c - UDMA100 | 22 | * VIA VT8233c - UDMA100 |
23 | * VIA VT8235 - UDMA133 | 23 | * VIA VT8235 - UDMA133 |
24 | * VIA VT8237 - UDMA133 | 24 | * VIA VT8237 - UDMA133 |
25 | * VIA VT8237A - UDMA133 | ||
25 | * VIA VT8237S - UDMA133 | 26 | * VIA VT8237S - UDMA133 |
26 | * VIA VT8251 - UDMA133 | 27 | * VIA VT8251 - UDMA133 |
27 | * | 28 | * |
@@ -64,26 +65,15 @@ | |||
64 | #define DRV_NAME "pata_via" | 65 | #define DRV_NAME "pata_via" |
65 | #define DRV_VERSION "0.3.4" | 66 | #define DRV_VERSION "0.3.4" |
66 | 67 | ||
67 | /* | ||
68 | * The following comes directly from Vojtech Pavlik's ide/pci/via82cxxx | ||
69 | * driver. | ||
70 | */ | ||
71 | |||
72 | enum { | 68 | enum { |
73 | VIA_UDMA = 0x007, | 69 | VIA_BAD_PREQ = 0x01, /* Crashes if PREQ# till DDACK# set */ |
74 | VIA_UDMA_NONE = 0x000, | 70 | VIA_BAD_CLK66 = 0x02, /* 66 MHz clock doesn't work correctly */ |
75 | VIA_UDMA_33 = 0x001, | 71 | VIA_SET_FIFO = 0x04, /* Needs to have FIFO split set */ |
76 | VIA_UDMA_66 = 0x002, | 72 | VIA_NO_UNMASK = 0x08, /* Doesn't work with IRQ unmasking on */ |
77 | VIA_UDMA_100 = 0x003, | 73 | VIA_BAD_ID = 0x10, /* Has wrong vendor ID (0x1107) */ |
78 | VIA_UDMA_133 = 0x004, | 74 | VIA_BAD_AST = 0x20, /* Don't touch Address Setup Timing */ |
79 | VIA_BAD_PREQ = 0x010, /* Crashes if PREQ# till DDACK# set */ | 75 | VIA_NO_ENABLES = 0x40, /* Has no enablebits */ |
80 | VIA_BAD_CLK66 = 0x020, /* 66 MHz clock doesn't work correctly */ | 76 | VIA_SATA_PATA = 0x80, /* SATA/PATA combined configuration */ |
81 | VIA_SET_FIFO = 0x040, /* Needs to have FIFO split set */ | ||
82 | VIA_NO_UNMASK = 0x080, /* Doesn't work with IRQ unmasking on */ | ||
83 | VIA_BAD_ID = 0x100, /* Has wrong vendor ID (0x1107) */ | ||
84 | VIA_BAD_AST = 0x200, /* Don't touch Address Setup Timing */ | ||
85 | VIA_NO_ENABLES = 0x400, /* Has no enablebits */ | ||
86 | VIA_SATA_PATA = 0x800, /* SATA/PATA combined configuration */ | ||
87 | }; | 77 | }; |
88 | 78 | ||
89 | enum { | 79 | enum { |
@@ -99,40 +89,37 @@ static const struct via_isa_bridge { | |||
99 | u16 id; | 89 | u16 id; |
100 | u8 rev_min; | 90 | u8 rev_min; |
101 | u8 rev_max; | 91 | u8 rev_max; |
102 | u16 flags; | 92 | u8 udma_mask; |
93 | u8 flags; | ||
103 | } via_isa_bridges[] = { | 94 | } via_isa_bridges[] = { |
104 | { "vx855", PCI_DEVICE_ID_VIA_VX855, 0x00, 0x2f, | 95 | { "vx855", PCI_DEVICE_ID_VIA_VX855, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST | VIA_SATA_PATA }, |
105 | VIA_UDMA_133 | VIA_BAD_AST | VIA_SATA_PATA }, | 96 | { "vx800", PCI_DEVICE_ID_VIA_VX800, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST | VIA_SATA_PATA }, |
106 | { "vx800", PCI_DEVICE_ID_VIA_VX800, 0x00, 0x2f, VIA_UDMA_133 | | 97 | { "vt8261", PCI_DEVICE_ID_VIA_8261, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, |
107 | VIA_BAD_AST | VIA_SATA_PATA }, | 98 | { "vt8237s", PCI_DEVICE_ID_VIA_8237S, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, |
108 | { "vt8261", PCI_DEVICE_ID_VIA_8261, 0x00, 0x2f, | 99 | { "vt8251", PCI_DEVICE_ID_VIA_8251, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, |
109 | VIA_UDMA_133 | VIA_BAD_AST }, | 100 | { "cx700", PCI_DEVICE_ID_VIA_CX700, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST | VIA_SATA_PATA }, |
110 | { "vt8237s", PCI_DEVICE_ID_VIA_8237S, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, | 101 | { "vt6410", PCI_DEVICE_ID_VIA_6410, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST | VIA_NO_ENABLES }, |
111 | { "vt8251", PCI_DEVICE_ID_VIA_8251, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, | 102 | { "vt6415", PCI_DEVICE_ID_VIA_6415, 0x00, 0xff, ATA_UDMA6, VIA_BAD_AST | VIA_NO_ENABLES }, |
112 | { "cx700", PCI_DEVICE_ID_VIA_CX700, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_SATA_PATA }, | 103 | { "vt8237a", PCI_DEVICE_ID_VIA_8237A, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, |
113 | { "vt6410", PCI_DEVICE_ID_VIA_6410, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_NO_ENABLES }, | 104 | { "vt8237", PCI_DEVICE_ID_VIA_8237, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, |
114 | { "vt6415", PCI_DEVICE_ID_VIA_6415, 0x00, 0xff, VIA_UDMA_133 | VIA_BAD_AST | VIA_NO_ENABLES }, | 105 | { "vt8235", PCI_DEVICE_ID_VIA_8235, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, |
115 | { "vt8237a", PCI_DEVICE_ID_VIA_8237A, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, | 106 | { "vt8233a", PCI_DEVICE_ID_VIA_8233A, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, |
116 | { "vt8237", PCI_DEVICE_ID_VIA_8237, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, | 107 | { "vt8233c", PCI_DEVICE_ID_VIA_8233C_0, 0x00, 0x2f, ATA_UDMA5, }, |
117 | { "vt8235", PCI_DEVICE_ID_VIA_8235, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, | 108 | { "vt8233", PCI_DEVICE_ID_VIA_8233_0, 0x00, 0x2f, ATA_UDMA5, }, |
118 | { "vt8233a", PCI_DEVICE_ID_VIA_8233A, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, | 109 | { "vt8231", PCI_DEVICE_ID_VIA_8231, 0x00, 0x2f, ATA_UDMA5, }, |
119 | { "vt8233c", PCI_DEVICE_ID_VIA_8233C_0, 0x00, 0x2f, VIA_UDMA_100 }, | 110 | { "vt82c686b", PCI_DEVICE_ID_VIA_82C686, 0x40, 0x4f, ATA_UDMA5, }, |
120 | { "vt8233", PCI_DEVICE_ID_VIA_8233_0, 0x00, 0x2f, VIA_UDMA_100 }, | 111 | { "vt82c686a", PCI_DEVICE_ID_VIA_82C686, 0x10, 0x2f, ATA_UDMA4, }, |
121 | { "vt8231", PCI_DEVICE_ID_VIA_8231, 0x00, 0x2f, VIA_UDMA_100 }, | 112 | { "vt82c686", PCI_DEVICE_ID_VIA_82C686, 0x00, 0x0f, ATA_UDMA2, VIA_BAD_CLK66 }, |
122 | { "vt82c686b", PCI_DEVICE_ID_VIA_82C686, 0x40, 0x4f, VIA_UDMA_100 }, | 113 | { "vt82c596b", PCI_DEVICE_ID_VIA_82C596, 0x10, 0x2f, ATA_UDMA4, }, |
123 | { "vt82c686a", PCI_DEVICE_ID_VIA_82C686, 0x10, 0x2f, VIA_UDMA_66 }, | 114 | { "vt82c596a", PCI_DEVICE_ID_VIA_82C596, 0x00, 0x0f, ATA_UDMA2, VIA_BAD_CLK66 }, |
124 | { "vt82c686", PCI_DEVICE_ID_VIA_82C686, 0x00, 0x0f, VIA_UDMA_33 | VIA_BAD_CLK66 }, | 115 | { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x47, 0x4f, ATA_UDMA2, VIA_SET_FIFO }, |
125 | { "vt82c596b", PCI_DEVICE_ID_VIA_82C596, 0x10, 0x2f, VIA_UDMA_66 }, | 116 | { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x40, 0x46, ATA_UDMA2, VIA_SET_FIFO | VIA_BAD_PREQ }, |
126 | { "vt82c596a", PCI_DEVICE_ID_VIA_82C596, 0x00, 0x0f, VIA_UDMA_33 | VIA_BAD_CLK66 }, | 117 | { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x30, 0x3f, ATA_UDMA2, VIA_SET_FIFO }, |
127 | { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x47, 0x4f, VIA_UDMA_33 | VIA_SET_FIFO }, | 118 | { "vt82c586a", PCI_DEVICE_ID_VIA_82C586_0, 0x20, 0x2f, ATA_UDMA2, VIA_SET_FIFO }, |
128 | { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x40, 0x46, VIA_UDMA_33 | VIA_SET_FIFO | VIA_BAD_PREQ }, | 119 | { "vt82c586", PCI_DEVICE_ID_VIA_82C586_0, 0x00, 0x0f, 0x00, VIA_SET_FIFO }, |
129 | { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x30, 0x3f, VIA_UDMA_33 | VIA_SET_FIFO }, | 120 | { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, 0x00, VIA_SET_FIFO | VIA_NO_UNMASK }, |
130 | { "vt82c586a", PCI_DEVICE_ID_VIA_82C586_0, 0x20, 0x2f, VIA_UDMA_33 | VIA_SET_FIFO }, | 121 | { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, 0x00, VIA_SET_FIFO | VIA_NO_UNMASK | VIA_BAD_ID }, |
131 | { "vt82c586", PCI_DEVICE_ID_VIA_82C586_0, 0x00, 0x0f, VIA_UDMA_NONE | VIA_SET_FIFO }, | 122 | { "vtxxxx", PCI_DEVICE_ID_VIA_ANON, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, |
132 | { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, VIA_UDMA_NONE | VIA_SET_FIFO | VIA_NO_UNMASK }, | ||
133 | { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, VIA_UDMA_NONE | VIA_SET_FIFO | VIA_NO_UNMASK | VIA_BAD_ID }, | ||
134 | { "vtxxxx", PCI_DEVICE_ID_VIA_ANON, 0x00, 0x2f, | ||
135 | VIA_UDMA_133 | VIA_BAD_AST }, | ||
136 | { NULL } | 123 | { NULL } |
137 | }; | 124 | }; |
138 | 125 | ||
@@ -191,10 +178,10 @@ static int via_cable_detect(struct ata_port *ap) { | |||
191 | return ATA_CBL_SATA; | 178 | return ATA_CBL_SATA; |
192 | 179 | ||
193 | /* Early chips are 40 wire */ | 180 | /* Early chips are 40 wire */ |
194 | if ((config->flags & VIA_UDMA) < VIA_UDMA_66) | 181 | if (config->udma_mask < ATA_UDMA4) |
195 | return ATA_CBL_PATA40; | 182 | return ATA_CBL_PATA40; |
196 | /* UDMA 66 chips have only drive side logic */ | 183 | /* UDMA 66 chips have only drive side logic */ |
197 | else if ((config->flags & VIA_UDMA) < VIA_UDMA_100) | 184 | else if (config->udma_mask < ATA_UDMA5) |
198 | return ATA_CBL_PATA_UNK; | 185 | return ATA_CBL_PATA_UNK; |
199 | /* UDMA 100 or later */ | 186 | /* UDMA 100 or later */ |
200 | pci_read_config_dword(pdev, 0x50, &ata66); | 187 | pci_read_config_dword(pdev, 0x50, &ata66); |
@@ -233,7 +220,6 @@ static int via_pre_reset(struct ata_link *link, unsigned long deadline) | |||
233 | * @ap: ATA interface | 220 | * @ap: ATA interface |
234 | * @adev: ATA device | 221 | * @adev: ATA device |
235 | * @mode: ATA mode being programmed | 222 | * @mode: ATA mode being programmed |
236 | * @tdiv: Clocks per PCI clock | ||
237 | * @set_ast: Set to program address setup | 223 | * @set_ast: Set to program address setup |
238 | * @udma_type: UDMA mode/format of registers | 224 | * @udma_type: UDMA mode/format of registers |
239 | * | 225 | * |
@@ -244,17 +230,27 @@ static int via_pre_reset(struct ata_link *link, unsigned long deadline) | |||
244 | * on the two channels. | 230 | * on the two channels. |
245 | */ | 231 | */ |
246 | 232 | ||
247 | static void via_do_set_mode(struct ata_port *ap, struct ata_device *adev, int mode, int tdiv, int set_ast, int udma_type) | 233 | static void via_do_set_mode(struct ata_port *ap, struct ata_device *adev, |
234 | int mode, int set_ast, int udma_type) | ||
248 | { | 235 | { |
249 | struct pci_dev *pdev = to_pci_dev(ap->host->dev); | 236 | struct pci_dev *pdev = to_pci_dev(ap->host->dev); |
250 | struct ata_device *peer = ata_dev_pair(adev); | 237 | struct ata_device *peer = ata_dev_pair(adev); |
251 | struct ata_timing t, p; | 238 | struct ata_timing t, p; |
252 | static int via_clock = 33333; /* Bus clock in kHZ - ought to be tunable one day */ | 239 | static int via_clock = 33333; /* Bus clock in kHZ */ |
253 | unsigned long T = 1000000000 / via_clock; | 240 | unsigned long T = 1000000000 / via_clock; |
254 | unsigned long UT = T/tdiv; | 241 | unsigned long UT = T; |
255 | int ut; | 242 | int ut; |
256 | int offset = 3 - (2*ap->port_no) - adev->devno; | 243 | int offset = 3 - (2*ap->port_no) - adev->devno; |
257 | 244 | ||
245 | switch (udma_type) { | ||
246 | case ATA_UDMA4: | ||
247 | UT = T / 2; break; | ||
248 | case ATA_UDMA5: | ||
249 | UT = T / 3; break; | ||
250 | case ATA_UDMA6: | ||
251 | UT = T / 4; break; | ||
252 | } | ||
253 | |||
258 | /* Calculate the timing values we require */ | 254 | /* Calculate the timing values we require */ |
259 | ata_timing_compute(adev, mode, &t, T, UT); | 255 | ata_timing_compute(adev, mode, &t, T, UT); |
260 | 256 | ||
@@ -284,22 +280,20 @@ static void via_do_set_mode(struct ata_port *ap, struct ata_device *adev, int mo | |||
284 | ((clamp_val(t.active, 1, 16) - 1) << 4) | (clamp_val(t.recover, 1, 16) - 1)); | 280 | ((clamp_val(t.active, 1, 16) - 1) << 4) | (clamp_val(t.recover, 1, 16) - 1)); |
285 | 281 | ||
286 | /* Load the UDMA bits according to type */ | 282 | /* Load the UDMA bits according to type */ |
287 | switch(udma_type) { | 283 | switch (udma_type) { |
288 | default: | 284 | case ATA_UDMA2: |
289 | /* BUG() ? */ | 285 | default: |
290 | /* fall through */ | 286 | ut = t.udma ? (0xe0 | (clamp_val(t.udma, 2, 5) - 2)) : 0x03; |
291 | case 33: | 287 | break; |
292 | ut = t.udma ? (0xe0 | (clamp_val(t.udma, 2, 5) - 2)) : 0x03; | 288 | case ATA_UDMA4: |
293 | break; | 289 | ut = t.udma ? (0xe8 | (clamp_val(t.udma, 2, 9) - 2)) : 0x0f; |
294 | case 66: | 290 | break; |
295 | ut = t.udma ? (0xe8 | (clamp_val(t.udma, 2, 9) - 2)) : 0x0f; | 291 | case ATA_UDMA5: |
296 | break; | 292 | ut = t.udma ? (0xe0 | (clamp_val(t.udma, 2, 9) - 2)) : 0x07; |
297 | case 100: | 293 | break; |
298 | ut = t.udma ? (0xe0 | (clamp_val(t.udma, 2, 9) - 2)) : 0x07; | 294 | case ATA_UDMA6: |
299 | break; | 295 | ut = t.udma ? (0xe0 | (clamp_val(t.udma, 2, 9) - 2)) : 0x07; |
300 | case 133: | 296 | break; |
301 | ut = t.udma ? (0xe0 | (clamp_val(t.udma, 2, 9) - 2)) : 0x07; | ||
302 | break; | ||
303 | } | 297 | } |
304 | 298 | ||
305 | /* Set UDMA unless device is not UDMA capable */ | 299 | /* Set UDMA unless device is not UDMA capable */ |
@@ -325,22 +319,16 @@ static void via_set_piomode(struct ata_port *ap, struct ata_device *adev) | |||
325 | { | 319 | { |
326 | const struct via_isa_bridge *config = ap->host->private_data; | 320 | const struct via_isa_bridge *config = ap->host->private_data; |
327 | int set_ast = (config->flags & VIA_BAD_AST) ? 0 : 1; | 321 | int set_ast = (config->flags & VIA_BAD_AST) ? 0 : 1; |
328 | int mode = config->flags & VIA_UDMA; | ||
329 | static u8 tclock[5] = { 1, 1, 2, 3, 4 }; | ||
330 | static u8 udma[5] = { 0, 33, 66, 100, 133 }; | ||
331 | 322 | ||
332 | via_do_set_mode(ap, adev, adev->pio_mode, tclock[mode], set_ast, udma[mode]); | 323 | via_do_set_mode(ap, adev, adev->pio_mode, set_ast, config->udma_mask); |
333 | } | 324 | } |
334 | 325 | ||
335 | static void via_set_dmamode(struct ata_port *ap, struct ata_device *adev) | 326 | static void via_set_dmamode(struct ata_port *ap, struct ata_device *adev) |
336 | { | 327 | { |
337 | const struct via_isa_bridge *config = ap->host->private_data; | 328 | const struct via_isa_bridge *config = ap->host->private_data; |
338 | int set_ast = (config->flags & VIA_BAD_AST) ? 0 : 1; | 329 | int set_ast = (config->flags & VIA_BAD_AST) ? 0 : 1; |
339 | int mode = config->flags & VIA_UDMA; | ||
340 | static u8 tclock[5] = { 1, 1, 2, 3, 4 }; | ||
341 | static u8 udma[5] = { 0, 33, 66, 100, 133 }; | ||
342 | 330 | ||
343 | via_do_set_mode(ap, adev, adev->dma_mode, tclock[mode], set_ast, udma[mode]); | 331 | via_do_set_mode(ap, adev, adev->dma_mode, set_ast, config->udma_mask); |
344 | } | 332 | } |
345 | 333 | ||
346 | /** | 334 | /** |
@@ -604,33 +592,29 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id) | |||
604 | via_config_fifo(pdev, config->flags); | 592 | via_config_fifo(pdev, config->flags); |
605 | 593 | ||
606 | /* Clock set up */ | 594 | /* Clock set up */ |
607 | switch(config->flags & VIA_UDMA) { | 595 | switch (config->udma_mask) { |
608 | case VIA_UDMA_NONE: | 596 | case 0x00: |
609 | if (config->flags & VIA_NO_UNMASK) | 597 | if (config->flags & VIA_NO_UNMASK) |
610 | ppi[0] = &via_mwdma_info_borked; | 598 | ppi[0] = &via_mwdma_info_borked; |
611 | else | 599 | else |
612 | ppi[0] = &via_mwdma_info; | 600 | ppi[0] = &via_mwdma_info; |
613 | break; | 601 | break; |
614 | case VIA_UDMA_33: | 602 | case ATA_UDMA2: |
615 | ppi[0] = &via_udma33_info; | 603 | ppi[0] = &via_udma33_info; |
616 | break; | 604 | break; |
617 | case VIA_UDMA_66: | 605 | case ATA_UDMA4: |
618 | ppi[0] = &via_udma66_info; | 606 | ppi[0] = &via_udma66_info; |
619 | /* The 66 MHz devices require we enable the clock */ | 607 | break; |
620 | pci_read_config_dword(pdev, 0x50, &timing); | 608 | case ATA_UDMA5: |
621 | timing |= 0x80008; | 609 | ppi[0] = &via_udma100_info; |
622 | pci_write_config_dword(pdev, 0x50, timing); | 610 | break; |
623 | break; | 611 | case ATA_UDMA6: |
624 | case VIA_UDMA_100: | 612 | ppi[0] = &via_udma133_info; |
625 | ppi[0] = &via_udma100_info; | 613 | break; |
626 | break; | 614 | default: |
627 | case VIA_UDMA_133: | 615 | WARN_ON(1); |
628 | ppi[0] = &via_udma133_info; | 616 | return -ENODEV; |
629 | break; | 617 | } |
630 | default: | ||
631 | WARN_ON(1); | ||
632 | return -ENODEV; | ||
633 | } | ||
634 | 618 | ||
635 | if (config->flags & VIA_BAD_CLK66) { | 619 | if (config->flags & VIA_BAD_CLK66) { |
636 | /* Disable the 66MHz clock on problem devices */ | 620 | /* Disable the 66MHz clock on problem devices */ |
@@ -667,7 +651,7 @@ static int via_reinit_one(struct pci_dev *pdev) | |||
667 | 651 | ||
668 | via_config_fifo(pdev, config->flags); | 652 | via_config_fifo(pdev, config->flags); |
669 | 653 | ||
670 | if ((config->flags & VIA_UDMA) == VIA_UDMA_66) { | 654 | if (config->udma_mask == ATA_UDMA4) { |
671 | /* The 66 MHz devices require we enable the clock */ | 655 | /* The 66 MHz devices require we enable the clock */ |
672 | pci_read_config_dword(pdev, 0x50, &timing); | 656 | pci_read_config_dword(pdev, 0x50, &timing); |
673 | timing |= 0x80008; | 657 | timing |= 0x80008; |