aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/powerpc/kernel/cpu_setup_6xx.S8
-rw-r--r--arch/ppc/8260_io/fcc_enet.c19
-rw-r--r--arch/ppc/8xx_io/enet.c23
-rw-r--r--arch/ppc/Kconfig82
-rw-r--r--arch/ppc/configs/ads8272_defconfig930
-rw-r--r--arch/ppc/configs/mpc86x_ads_defconfig633
-rw-r--r--arch/ppc/configs/mpc885ads_defconfig622
-rw-r--r--arch/ppc/platforms/Makefile4
-rw-r--r--arch/ppc/platforms/fads.h25
-rw-r--r--arch/ppc/platforms/mpc8272ads_setup.c367
-rw-r--r--arch/ppc/platforms/mpc885ads.h93
-rw-r--r--arch/ppc/platforms/mpc885ads_setup.c476
-rw-r--r--arch/ppc/platforms/pq2ads.c53
-rw-r--r--arch/ppc/platforms/pq2ads.h94
-rw-r--r--arch/ppc/platforms/pq2ads_pd.h32
-rw-r--r--arch/ppc/syslib/m8260_setup.c6
-rw-r--r--arch/ppc/syslib/m82xx_pci.c38
-rw-r--r--arch/ppc/syslib/m8xx_setup.c10
-rw-r--r--include/asm-ppc/mpc8260.h4
-rw-r--r--include/asm-ppc/mpc8xx.h4
20 files changed, 9 insertions, 3514 deletions
diff --git a/arch/powerpc/kernel/cpu_setup_6xx.S b/arch/powerpc/kernel/cpu_setup_6xx.S
index f1ee0b3f78f2..72d1d7395254 100644
--- a/arch/powerpc/kernel/cpu_setup_6xx.S
+++ b/arch/powerpc/kernel/cpu_setup_6xx.S
@@ -17,7 +17,13 @@
17#include <asm/cache.h> 17#include <asm/cache.h>
18 18
19_GLOBAL(__setup_cpu_603) 19_GLOBAL(__setup_cpu_603)
20 b setup_common_caches 20 mflr r4
21BEGIN_FTR_SECTION
22 bl __init_fpu_registers
23END_FTR_SECTION_IFCLR(CPU_FTR_FPU_UNAVAILABLE)
24 bl setup_common_caches
25 mtlr r4
26 blr
21_GLOBAL(__setup_cpu_604) 27_GLOBAL(__setup_cpu_604)
22 mflr r4 28 mflr r4
23 bl setup_common_caches 29 bl setup_common_caches
diff --git a/arch/ppc/8260_io/fcc_enet.c b/arch/ppc/8260_io/fcc_enet.c
index bcc3aa9d04f3..d38b57e24cee 100644
--- a/arch/ppc/8260_io/fcc_enet.c
+++ b/arch/ppc/8260_io/fcc_enet.c
@@ -165,9 +165,6 @@ static int fcc_enet_set_mac_address(struct net_device *dev, void *addr);
165#ifdef CONFIG_SBC82xx 165#ifdef CONFIG_SBC82xx
166#define F1_RXCLK 9 166#define F1_RXCLK 9
167#define F1_TXCLK 10 167#define F1_TXCLK 10
168#elif defined(CONFIG_ADS8272)
169#define F1_RXCLK 11
170#define F1_TXCLK 10
171#else 168#else
172#define F1_RXCLK 12 169#define F1_RXCLK 12
173#define F1_TXCLK 11 170#define F1_TXCLK 11
@@ -175,13 +172,8 @@ static int fcc_enet_set_mac_address(struct net_device *dev, void *addr);
175 172
176/* FCC2 Clock Source Configuration. There are board specific. 173/* FCC2 Clock Source Configuration. There are board specific.
177 Can only choose from CLK13-16 */ 174 Can only choose from CLK13-16 */
178#ifdef CONFIG_ADS8272
179#define F2_RXCLK 15
180#define F2_TXCLK 16
181#else
182#define F2_RXCLK 13 175#define F2_RXCLK 13
183#define F2_TXCLK 14 176#define F2_TXCLK 14
184#endif
185 177
186/* FCC3 Clock Source Configuration. There are board specific. 178/* FCC3 Clock Source Configuration. There are board specific.
187 Can only choose from CLK13-16 */ 179 Can only choose from CLK13-16 */
@@ -289,10 +281,7 @@ static int fcc_enet_set_mac_address(struct net_device *dev, void *addr);
289/* TQM8260 has MDIO and MDCK on PC30 and PC31 respectively */ 281/* TQM8260 has MDIO and MDCK on PC30 and PC31 respectively */
290#define PC_MDIO ((uint)0x00000002) 282#define PC_MDIO ((uint)0x00000002)
291#define PC_MDCK ((uint)0x00000001) 283#define PC_MDCK ((uint)0x00000001)
292#elif defined(CONFIG_ADS8272) 284#elif defined(CONFIG_EST8260) || defined(CONFIG_ADS8260)
293#define PC_MDIO ((uint)0x00002000)
294#define PC_MDCK ((uint)0x00001000)
295#elif defined(CONFIG_EST8260) || defined(CONFIG_ADS8260) || defined(CONFIG_PQ2FADS)
296#define PC_MDIO ((uint)0x00400000) 285#define PC_MDIO ((uint)0x00400000)
297#define PC_MDCK ((uint)0x00200000) 286#define PC_MDCK ((uint)0x00200000)
298#else 287#else
@@ -2118,11 +2107,6 @@ init_fcc_startup(fcc_info_t *fip, struct net_device *dev)
2118 printk("Can't get FCC IRQ %d\n", fip->fc_interrupt); 2107 printk("Can't get FCC IRQ %d\n", fip->fc_interrupt);
2119 2108
2120#ifdef PHY_INTERRUPT 2109#ifdef PHY_INTERRUPT
2121#ifdef CONFIG_ADS8272
2122 if (request_irq(PHY_INTERRUPT, mii_link_interrupt, IRQF_SHARED,
2123 "mii", dev) < 0)
2124 printk(KERN_CRIT "Can't get MII IRQ %d\n", PHY_INTERRUPT);
2125#else
2126 /* Make IRQn edge triggered. This does not work if PHY_INTERRUPT is 2110 /* Make IRQn edge triggered. This does not work if PHY_INTERRUPT is
2127 * on Port C. 2111 * on Port C.
2128 */ 2112 */
@@ -2132,7 +2116,6 @@ init_fcc_startup(fcc_info_t *fip, struct net_device *dev)
2132 if (request_irq(PHY_INTERRUPT, mii_link_interrupt, 0, 2116 if (request_irq(PHY_INTERRUPT, mii_link_interrupt, 0,
2133 "mii", dev) < 0) 2117 "mii", dev) < 0)
2134 printk(KERN_CRIT "Can't get MII IRQ %d\n", PHY_INTERRUPT); 2118 printk(KERN_CRIT "Can't get MII IRQ %d\n", PHY_INTERRUPT);
2135#endif
2136#endif /* PHY_INTERRUPT */ 2119#endif /* PHY_INTERRUPT */
2137 2120
2138 /* Set GFMR to enable Ethernet operating mode. 2121 /* Set GFMR to enable Ethernet operating mode.
diff --git a/arch/ppc/8xx_io/enet.c b/arch/ppc/8xx_io/enet.c
index c6d047ae77ac..5899aea1644b 100644
--- a/arch/ppc/8xx_io/enet.c
+++ b/arch/ppc/8xx_io/enet.c
@@ -946,29 +946,6 @@ static int __init scc_enet_init(void)
946 *((volatile uint *)BCSR1) &= ~BCSR1_ETHEN; 946 *((volatile uint *)BCSR1) &= ~BCSR1_ETHEN;
947#endif 947#endif
948 948
949#ifdef CONFIG_MPC885ADS
950
951 /* Deassert PHY reset and enable the PHY.
952 */
953 {
954 volatile uint __iomem *bcsr = ioremap(BCSR_ADDR, BCSR_SIZE);
955 uint tmp;
956
957 tmp = in_be32(bcsr + 1 /* BCSR1 */);
958 tmp |= BCSR1_ETHEN;
959 out_be32(bcsr + 1, tmp);
960 tmp = in_be32(bcsr + 4 /* BCSR4 */);
961 tmp |= BCSR4_ETH10_RST;
962 out_be32(bcsr + 4, tmp);
963 iounmap(bcsr);
964 }
965
966 /* On MPC885ADS SCC ethernet PHY defaults to the full duplex mode
967 * upon reset. SCC is set to half duplex by default. So this
968 * inconsistency should be better fixed by the software.
969 */
970#endif
971
972 dev->base_addr = (unsigned long)ep; 949 dev->base_addr = (unsigned long)ep;
973#if 0 950#if 0
974 dev->name = "CPM_ENET"; 951 dev->name = "CPM_ENET";
diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig
index abc877faf123..0f1863ed9c1c 100644
--- a/arch/ppc/Kconfig
+++ b/arch/ppc/Kconfig
@@ -372,22 +372,6 @@ config MPC8XXFADS
372 bool "FADS" 372 bool "FADS"
373 select FADS 373 select FADS
374 374
375config MPC86XADS
376 bool "MPC86XADS"
377 help
378 MPC86x Application Development System by Freescale Semiconductor.
379 The MPC86xADS is meant to serve as a platform for s/w and h/w
380 development around the MPC86X processor families.
381 select FADS
382
383config MPC885ADS
384 bool "MPC885ADS"
385 help
386 Freescale Semiconductor MPC885 Application Development System (ADS).
387 Also known as DUET.
388 The MPC885ADS is meant to serve as a platform for s/w and h/w
389 development around the MPC885 processor family.
390
391config TQM823L 375config TQM823L
392 bool "TQM823L" 376 bool "TQM823L"
393 help 377 help
@@ -479,53 +463,6 @@ config WINCEPT
479 463
480endchoice 464endchoice
481 465
482menu "Freescale Ethernet driver platform-specific options"
483 depends on FS_ENET
484
485 config MPC8xx_SECOND_ETH
486 bool "Second Ethernet channel"
487 depends on (MPC885ADS || MPC86XADS)
488 default y
489 help
490 This enables support for second Ethernet on MPC885ADS and MPC86xADS boards.
491 The latter will use SCC1, for 885ADS you can select it below.
492
493 choice
494 prompt "Second Ethernet channel"
495 depends on MPC8xx_SECOND_ETH
496 default MPC8xx_SECOND_ETH_FEC2
497
498 config MPC8xx_SECOND_ETH_FEC2
499 bool "FEC2"
500 depends on MPC885ADS
501 help
502 Enable FEC2 to serve as 2-nd Ethernet channel. Note that SMC2
503 (often 2-nd UART) will not work if this is enabled.
504
505 config MPC8xx_SECOND_ETH_SCC1
506 bool "SCC1"
507 depends on MPC86XADS
508 select MPC8xx_SCC_ENET_FIXED
509 help
510 Enable SCC1 to serve as 2-nd Ethernet channel. Note that SMC1
511 (often 1-nd UART) will not work if this is enabled.
512
513 config MPC8xx_SECOND_ETH_SCC3
514 bool "SCC3"
515 depends on MPC885ADS
516 help
517 Enable SCC3 to serve as 2-nd Ethernet channel. Note that SMC1
518 (often 1-nd UART) will not work if this is enabled.
519
520 endchoice
521
522 config MPC8xx_SCC_ENET_FIXED
523 depends on MPC8xx_SECOND_ETH_SCC
524 default n
525 bool "Use fixed MII-less mode for SCC Ethernet"
526
527endmenu
528
529choice 466choice
530 prompt "Machine Type" 467 prompt "Machine Type"
531 depends on 6xx 468 depends on 6xx
@@ -666,9 +603,6 @@ config TQM8260
666 End of Life: not yet :-) 603 End of Life: not yet :-)
667 URL: <http://www.denx.de/PDF/TQM82xx_SPEC_Rev005.pdf> 604 URL: <http://www.denx.de/PDF/TQM82xx_SPEC_Rev005.pdf>
668 605
669config ADS8272
670 bool "ADS8272"
671
672config PQ2FADS 606config PQ2FADS
673 bool "Freescale-PQ2FADS" 607 bool "Freescale-PQ2FADS"
674 help 608 help
@@ -698,11 +632,6 @@ config EV64360
698 platform. 632 platform.
699endchoice 633endchoice
700 634
701config PQ2ADS
702 bool
703 depends on ADS8272
704 default y
705
706config TQM8xxL 635config TQM8xxL
707 bool 636 bool
708 depends on 8xx && (TQM823L || TQM850L || FPS850L || TQM855L || TQM860L) 637 depends on 8xx && (TQM823L || TQM850L || FPS850L || TQM855L || TQM860L)
@@ -725,15 +654,6 @@ config 8260
725 this option means that you wish to build a kernel for a machine with 654 this option means that you wish to build a kernel for a machine with
726 an 8260 class CPU. 655 an 8260 class CPU.
727 656
728config 8272
729 bool
730 depends on 6xx
731 default y if ADS8272
732 select 8260
733 help
734 The MPC8272 CPM has a different internal dpram setup than other CPM2
735 devices
736
737config CPM1 657config CPM1
738 bool 658 bool
739 depends on 8xx 659 depends on 8xx
@@ -1069,7 +989,7 @@ config PCI_8260
1069 989
1070config 8260_PCI9 990config 8260_PCI9
1071 bool "Enable workaround for MPC826x erratum PCI 9" 991 bool "Enable workaround for MPC826x erratum PCI 9"
1072 depends on PCI_8260 && !ADS8272 992 depends on PCI_8260
1073 default y 993 default y
1074 994
1075choice 995choice
diff --git a/arch/ppc/configs/ads8272_defconfig b/arch/ppc/configs/ads8272_defconfig
deleted file mode 100644
index 6619f9118b00..000000000000
--- a/arch/ppc/configs/ads8272_defconfig
+++ /dev/null
@@ -1,930 +0,0 @@
1#
2# Automatically generated make config: don't edit
3# Linux kernel version: 2.6.21-rc5
4# Wed Apr 4 20:55:16 2007
5#
6CONFIG_MMU=y
7CONFIG_GENERIC_HARDIRQS=y
8CONFIG_RWSEM_XCHGADD_ALGORITHM=y
9CONFIG_ARCH_HAS_ILOG2_U32=y
10# CONFIG_ARCH_HAS_ILOG2_U64 is not set
11CONFIG_GENERIC_HWEIGHT=y
12CONFIG_GENERIC_CALIBRATE_DELAY=y
13CONFIG_PPC=y
14CONFIG_PPC32=y
15CONFIG_GENERIC_NVRAM=y
16CONFIG_GENERIC_FIND_NEXT_BIT=y
17CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
18CONFIG_ARCH_MAY_HAVE_PC_FDC=y
19CONFIG_GENERIC_BUG=y
20CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
21
22#
23# Code maturity level options
24#
25CONFIG_EXPERIMENTAL=y
26CONFIG_BROKEN_ON_SMP=y
27CONFIG_INIT_ENV_ARG_LIMIT=32
28
29#
30# General setup
31#
32CONFIG_LOCALVERSION=""
33CONFIG_LOCALVERSION_AUTO=y
34CONFIG_SWAP=y
35CONFIG_SYSVIPC=y
36# CONFIG_IPC_NS is not set
37CONFIG_SYSVIPC_SYSCTL=y
38# CONFIG_POSIX_MQUEUE is not set
39# CONFIG_BSD_PROCESS_ACCT is not set
40# CONFIG_TASKSTATS is not set
41# CONFIG_UTS_NS is not set
42# CONFIG_AUDIT is not set
43# CONFIG_IKCONFIG is not set
44CONFIG_SYSFS_DEPRECATED=y
45# CONFIG_RELAY is not set
46CONFIG_BLK_DEV_INITRD=y
47CONFIG_INITRAMFS_SOURCE=""
48# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
49CONFIG_SYSCTL=y
50CONFIG_EMBEDDED=y
51CONFIG_SYSCTL_SYSCALL=y
52# CONFIG_KALLSYMS is not set
53# CONFIG_HOTPLUG is not set
54CONFIG_PRINTK=y
55CONFIG_BUG=y
56CONFIG_ELF_CORE=y
57CONFIG_BASE_FULL=y
58CONFIG_FUTEX=y
59# CONFIG_EPOLL is not set
60CONFIG_SHMEM=y
61CONFIG_SLAB=y
62CONFIG_VM_EVENT_COUNTERS=y
63CONFIG_RT_MUTEXES=y
64# CONFIG_TINY_SHMEM is not set
65CONFIG_BASE_SMALL=0
66# CONFIG_SLOB is not set
67
68#
69# Loadable module support
70#
71# CONFIG_MODULES is not set
72
73#
74# Block layer
75#
76CONFIG_BLOCK=y
77# CONFIG_LBD is not set
78# CONFIG_BLK_DEV_IO_TRACE is not set
79# CONFIG_LSF is not set
80
81#
82# IO Schedulers
83#
84CONFIG_IOSCHED_NOOP=y
85CONFIG_IOSCHED_AS=y
86CONFIG_IOSCHED_DEADLINE=y
87CONFIG_IOSCHED_CFQ=y
88# CONFIG_DEFAULT_AS is not set
89# CONFIG_DEFAULT_DEADLINE is not set
90CONFIG_DEFAULT_CFQ=y
91# CONFIG_DEFAULT_NOOP is not set
92CONFIG_DEFAULT_IOSCHED="cfq"
93
94#
95# Processor
96#
97CONFIG_6xx=y
98# CONFIG_40x is not set
99# CONFIG_44x is not set
100# CONFIG_8xx is not set
101# CONFIG_E200 is not set
102# CONFIG_E500 is not set
103CONFIG_PPC_FPU=y
104# CONFIG_PPC_DCR_NATIVE is not set
105# CONFIG_KEXEC is not set
106# CONFIG_CPU_FREQ is not set
107# CONFIG_WANT_EARLY_SERIAL is not set
108CONFIG_EMBEDDEDBOOT=y
109CONFIG_PPC_STD_MMU=y
110
111#
112# Platform options
113#
114
115#
116# Freescale Ethernet driver platform-specific options
117#
118# CONFIG_PPC_PREP is not set
119# CONFIG_APUS is not set
120# CONFIG_KATANA is not set
121# CONFIG_WILLOW is not set
122# CONFIG_CPCI690 is not set
123# CONFIG_POWERPMC250 is not set
124# CONFIG_CHESTNUT is not set
125# CONFIG_SPRUCE is not set
126# CONFIG_HDPU is not set
127# CONFIG_EV64260 is not set
128# CONFIG_LOPEC is not set
129# CONFIG_MVME5100 is not set
130# CONFIG_PPLUS is not set
131# CONFIG_PRPMC750 is not set
132# CONFIG_PRPMC800 is not set
133# CONFIG_SANDPOINT is not set
134# CONFIG_RADSTONE_PPC7D is not set
135# CONFIG_PAL4 is not set
136# CONFIG_EST8260 is not set
137# CONFIG_SBC82xx is not set
138# CONFIG_SBS8260 is not set
139# CONFIG_RPX8260 is not set
140# CONFIG_TQM8260 is not set
141CONFIG_ADS8272=y
142# CONFIG_PQ2FADS is not set
143# CONFIG_LITE5200 is not set
144# CONFIG_MPC834x_SYS is not set
145# CONFIG_EV64360 is not set
146CONFIG_PQ2ADS=y
147CONFIG_8260=y
148CONFIG_8272=y
149CONFIG_CPM2=y
150# CONFIG_PC_KEYBOARD is not set
151# CONFIG_SMP is not set
152# CONFIG_HIGHMEM is not set
153CONFIG_ARCH_POPULATES_NODE_MAP=y
154# CONFIG_HZ_100 is not set
155CONFIG_HZ_250=y
156# CONFIG_HZ_300 is not set
157# CONFIG_HZ_1000 is not set
158CONFIG_HZ=250
159CONFIG_PREEMPT_NONE=y
160# CONFIG_PREEMPT_VOLUNTARY is not set
161# CONFIG_PREEMPT is not set
162CONFIG_SELECT_MEMORY_MODEL=y
163CONFIG_FLATMEM_MANUAL=y
164# CONFIG_DISCONTIGMEM_MANUAL is not set
165# CONFIG_SPARSEMEM_MANUAL is not set
166CONFIG_FLATMEM=y
167CONFIG_FLAT_NODE_MEM_MAP=y
168# CONFIG_SPARSEMEM_STATIC is not set
169CONFIG_SPLIT_PTLOCK_CPUS=4
170# CONFIG_RESOURCES_64BIT is not set
171CONFIG_ZONE_DMA_FLAG=1
172CONFIG_BINFMT_ELF=y
173# CONFIG_BINFMT_MISC is not set
174# CONFIG_CMDLINE_BOOL is not set
175# CONFIG_PM is not set
176CONFIG_SECCOMP=y
177CONFIG_ISA_DMA_API=y
178
179#
180# Bus options
181#
182CONFIG_ZONE_DMA=y
183# CONFIG_PPC_I8259 is not set
184CONFIG_PPC_INDIRECT_PCI=y
185CONFIG_PCI=y
186CONFIG_PCI_DOMAINS=y
187CONFIG_PCI_8260=y
188
189#
190# PCCARD (PCMCIA/CardBus) support
191#
192
193#
194# Advanced setup
195#
196# CONFIG_ADVANCED_OPTIONS is not set
197
198#
199# Default settings for advanced configuration options are used
200#
201CONFIG_HIGHMEM_START=0xfe000000
202CONFIG_LOWMEM_SIZE=0x30000000
203CONFIG_KERNEL_START=0xc0000000
204CONFIG_TASK_SIZE=0x80000000
205CONFIG_BOOT_LOAD=0x00400000
206
207#
208# Networking
209#
210CONFIG_NET=y
211
212#
213# Networking options
214#
215# CONFIG_NETDEBUG is not set
216CONFIG_PACKET=y
217# CONFIG_PACKET_MMAP is not set
218CONFIG_UNIX=y
219CONFIG_XFRM=y
220# CONFIG_XFRM_USER is not set
221# CONFIG_XFRM_SUB_POLICY is not set
222# CONFIG_XFRM_MIGRATE is not set
223# CONFIG_NET_KEY is not set
224CONFIG_INET=y
225CONFIG_IP_MULTICAST=y
226# CONFIG_IP_ADVANCED_ROUTER is not set
227CONFIG_IP_FIB_HASH=y
228CONFIG_IP_PNP=y
229CONFIG_IP_PNP_DHCP=y
230CONFIG_IP_PNP_BOOTP=y
231# CONFIG_IP_PNP_RARP is not set
232# CONFIG_NET_IPIP is not set
233# CONFIG_NET_IPGRE is not set
234# CONFIG_IP_MROUTE is not set
235# CONFIG_ARPD is not set
236CONFIG_SYN_COOKIES=y
237# CONFIG_INET_AH is not set
238# CONFIG_INET_ESP is not set
239# CONFIG_INET_IPCOMP is not set
240# CONFIG_INET_XFRM_TUNNEL is not set
241# CONFIG_INET_TUNNEL is not set
242CONFIG_INET_XFRM_MODE_TRANSPORT=y
243CONFIG_INET_XFRM_MODE_TUNNEL=y
244CONFIG_INET_XFRM_MODE_BEET=y
245CONFIG_INET_DIAG=y
246CONFIG_INET_TCP_DIAG=y
247# CONFIG_TCP_CONG_ADVANCED is not set
248CONFIG_TCP_CONG_CUBIC=y
249CONFIG_DEFAULT_TCP_CONG="cubic"
250# CONFIG_TCP_MD5SIG is not set
251# CONFIG_IPV6 is not set
252# CONFIG_INET6_XFRM_TUNNEL is not set
253# CONFIG_INET6_TUNNEL is not set
254# CONFIG_NETWORK_SECMARK is not set
255# CONFIG_NETFILTER is not set
256
257#
258# DCCP Configuration (EXPERIMENTAL)
259#
260# CONFIG_IP_DCCP is not set
261
262#
263# SCTP Configuration (EXPERIMENTAL)
264#
265# CONFIG_IP_SCTP is not set
266
267#
268# TIPC Configuration (EXPERIMENTAL)
269#
270# CONFIG_TIPC is not set
271# CONFIG_ATM is not set
272# CONFIG_BRIDGE is not set
273# CONFIG_VLAN_8021Q is not set
274# CONFIG_DECNET is not set
275# CONFIG_LLC2 is not set
276# CONFIG_IPX is not set
277# CONFIG_ATALK is not set
278# CONFIG_X25 is not set
279# CONFIG_LAPB is not set
280# CONFIG_ECONET is not set
281# CONFIG_WAN_ROUTER is not set
282
283#
284# QoS and/or fair queueing
285#
286# CONFIG_NET_SCHED is not set
287
288#
289# Network testing
290#
291# CONFIG_NET_PKTGEN is not set
292# CONFIG_HAMRADIO is not set
293# CONFIG_IRDA is not set
294# CONFIG_BT is not set
295# CONFIG_IEEE80211 is not set
296
297#
298# Device Drivers
299#
300
301#
302# Generic Driver Options
303#
304CONFIG_STANDALONE=y
305CONFIG_PREVENT_FIRMWARE_BUILD=y
306# CONFIG_SYS_HYPERVISOR is not set
307
308#
309# Connector - unified userspace <-> kernelspace linker
310#
311# CONFIG_CONNECTOR is not set
312
313#
314# Memory Technology Devices (MTD)
315#
316# CONFIG_MTD is not set
317
318#
319# Parallel port support
320#
321# CONFIG_PARPORT is not set
322
323#
324# Plug and Play support
325#
326# CONFIG_PNPACPI is not set
327
328#
329# Block devices
330#
331# CONFIG_BLK_DEV_FD is not set
332# CONFIG_BLK_CPQ_DA is not set
333# CONFIG_BLK_CPQ_CISS_DA is not set
334# CONFIG_BLK_DEV_DAC960 is not set
335# CONFIG_BLK_DEV_UMEM is not set
336# CONFIG_BLK_DEV_COW_COMMON is not set
337CONFIG_BLK_DEV_LOOP=y
338# CONFIG_BLK_DEV_CRYPTOLOOP is not set
339# CONFIG_BLK_DEV_NBD is not set
340# CONFIG_BLK_DEV_SX8 is not set
341CONFIG_BLK_DEV_RAM=y
342CONFIG_BLK_DEV_RAM_COUNT=16
343CONFIG_BLK_DEV_RAM_SIZE=32768
344CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
345# CONFIG_CDROM_PKTCDVD is not set
346# CONFIG_ATA_OVER_ETH is not set
347
348#
349# Misc devices
350#
351# CONFIG_SGI_IOC4 is not set
352# CONFIG_TIFM_CORE is not set
353
354#
355# ATA/ATAPI/MFM/RLL support
356#
357# CONFIG_IDE is not set
358
359#
360# SCSI device support
361#
362# CONFIG_RAID_ATTRS is not set
363# CONFIG_SCSI is not set
364# CONFIG_SCSI_NETLINK is not set
365
366#
367# Serial ATA (prod) and Parallel ATA (experimental) drivers
368#
369# CONFIG_ATA is not set
370
371#
372# Multi-device support (RAID and LVM)
373#
374# CONFIG_MD is not set
375
376#
377# Fusion MPT device support
378#
379# CONFIG_FUSION is not set
380
381#
382# IEEE 1394 (FireWire) support
383#
384# CONFIG_IEEE1394 is not set
385
386#
387# I2O device support
388#
389# CONFIG_I2O is not set
390
391#
392# Macintosh device drivers
393#
394# CONFIG_MAC_EMUMOUSEBTN is not set
395# CONFIG_WINDFARM is not set
396
397#
398# Network device support
399#
400CONFIG_NETDEVICES=y
401# CONFIG_DUMMY is not set
402# CONFIG_BONDING is not set
403# CONFIG_EQUALIZER is not set
404# CONFIG_TUN is not set
405
406#
407# ARCnet devices
408#
409# CONFIG_ARCNET is not set
410
411#
412# PHY device support
413#
414CONFIG_PHYLIB=y
415
416#
417# MII PHY device drivers
418#
419# CONFIG_MARVELL_PHY is not set
420CONFIG_DAVICOM_PHY=y
421# CONFIG_QSEMI_PHY is not set
422# CONFIG_LXT_PHY is not set
423# CONFIG_CICADA_PHY is not set
424# CONFIG_VITESSE_PHY is not set
425# CONFIG_SMSC_PHY is not set
426# CONFIG_BROADCOM_PHY is not set
427# CONFIG_FIXED_PHY is not set
428
429#
430# Ethernet (10 or 100Mbit)
431#
432CONFIG_NET_ETHERNET=y
433CONFIG_MII=y
434# CONFIG_HAPPYMEAL is not set
435# CONFIG_SUNGEM is not set
436# CONFIG_CASSINI is not set
437# CONFIG_NET_VENDOR_3COM is not set
438
439#
440# Tulip family network device support
441#
442# CONFIG_NET_TULIP is not set
443# CONFIG_HP100 is not set
444# CONFIG_NET_PCI is not set
445CONFIG_FS_ENET=y
446# CONFIG_FS_ENET_HAS_SCC is not set
447CONFIG_FS_ENET_HAS_FCC=y
448
449#
450# Ethernet (1000 Mbit)
451#
452# CONFIG_ACENIC is not set
453# CONFIG_DL2K is not set
454# CONFIG_E1000 is not set
455# CONFIG_NS83820 is not set
456# CONFIG_HAMACHI is not set
457# CONFIG_YELLOWFIN is not set
458# CONFIG_R8169 is not set
459# CONFIG_SIS190 is not set
460# CONFIG_SKGE is not set
461# CONFIG_SKY2 is not set
462# CONFIG_SK98LIN is not set
463# CONFIG_TIGON3 is not set
464# CONFIG_BNX2 is not set
465# CONFIG_QLA3XXX is not set
466# CONFIG_ATL1 is not set
467
468#
469# Ethernet (10000 Mbit)
470#
471# CONFIG_CHELSIO_T1 is not set
472# CONFIG_CHELSIO_T3 is not set
473# CONFIG_IXGB is not set
474# CONFIG_S2IO is not set
475# CONFIG_MYRI10GE is not set
476# CONFIG_NETXEN_NIC is not set
477
478#
479# Token Ring devices
480#
481# CONFIG_TR is not set
482
483#
484# Wireless LAN (non-hamradio)
485#
486# CONFIG_NET_RADIO is not set
487
488#
489# Wan interfaces
490#
491# CONFIG_WAN is not set
492# CONFIG_FDDI is not set
493# CONFIG_HIPPI is not set
494# CONFIG_PPP is not set
495# CONFIG_SLIP is not set
496# CONFIG_SHAPER is not set
497# CONFIG_NETCONSOLE is not set
498# CONFIG_NETPOLL is not set
499# CONFIG_NET_POLL_CONTROLLER is not set
500
501#
502# ISDN subsystem
503#
504# CONFIG_ISDN is not set
505
506#
507# Telephony Support
508#
509# CONFIG_PHONE is not set
510
511#
512# Input device support
513#
514CONFIG_INPUT=y
515# CONFIG_INPUT_FF_MEMLESS is not set
516
517#
518# Userland interfaces
519#
520# CONFIG_INPUT_MOUSEDEV is not set
521# CONFIG_INPUT_JOYDEV is not set
522# CONFIG_INPUT_TSDEV is not set
523# CONFIG_INPUT_EVDEV is not set
524# CONFIG_INPUT_EVBUG is not set
525
526#
527# Input Device Drivers
528#
529# CONFIG_INPUT_KEYBOARD is not set
530# CONFIG_INPUT_MOUSE is not set
531# CONFIG_INPUT_JOYSTICK is not set
532# CONFIG_INPUT_TOUCHSCREEN is not set
533# CONFIG_INPUT_MISC is not set
534
535#
536# Hardware I/O ports
537#
538# CONFIG_SERIO is not set
539# CONFIG_GAMEPORT is not set
540
541#
542# Character devices
543#
544# CONFIG_VT is not set
545# CONFIG_SERIAL_NONSTANDARD is not set
546
547#
548# Serial drivers
549#
550# CONFIG_SERIAL_8250 is not set
551
552#
553# Non-8250 serial port support
554#
555# CONFIG_SERIAL_UARTLITE is not set
556CONFIG_SERIAL_CORE=y
557CONFIG_SERIAL_CORE_CONSOLE=y
558CONFIG_SERIAL_CPM=y
559CONFIG_SERIAL_CPM_CONSOLE=y
560CONFIG_SERIAL_CPM_SCC1=y
561# CONFIG_SERIAL_CPM_SCC2 is not set
562# CONFIG_SERIAL_CPM_SCC3 is not set
563CONFIG_SERIAL_CPM_SCC4=y
564# CONFIG_SERIAL_CPM_SMC1 is not set
565# CONFIG_SERIAL_CPM_SMC2 is not set
566# CONFIG_SERIAL_JSM is not set
567CONFIG_UNIX98_PTYS=y
568CONFIG_LEGACY_PTYS=y
569CONFIG_LEGACY_PTY_COUNT=256
570
571#
572# IPMI
573#
574# CONFIG_IPMI_HANDLER is not set
575
576#
577# Watchdog Cards
578#
579# CONFIG_WATCHDOG is not set
580CONFIG_HW_RANDOM=y
581# CONFIG_NVRAM is not set
582CONFIG_GEN_RTC=y
583# CONFIG_GEN_RTC_X is not set
584# CONFIG_DTLK is not set
585# CONFIG_R3964 is not set
586# CONFIG_APPLICOM is not set
587# CONFIG_AGP is not set
588# CONFIG_DRM is not set
589# CONFIG_RAW_DRIVER is not set
590
591#
592# TPM devices
593#
594# CONFIG_TCG_TPM is not set
595
596#
597# I2C support
598#
599# CONFIG_I2C is not set
600
601#
602# SPI support
603#
604# CONFIG_SPI is not set
605# CONFIG_SPI_MASTER is not set
606
607#
608# Dallas's 1-wire bus
609#
610# CONFIG_W1 is not set
611
612#
613# Hardware Monitoring support
614#
615CONFIG_HWMON=y
616# CONFIG_HWMON_VID is not set
617# CONFIG_SENSORS_ABITUGURU is not set
618# CONFIG_SENSORS_F71805F is not set
619# CONFIG_SENSORS_PC87427 is not set
620# CONFIG_SENSORS_VT1211 is not set
621# CONFIG_HWMON_DEBUG_CHIP is not set
622
623#
624# Multifunction device drivers
625#
626# CONFIG_MFD_SM501 is not set
627
628#
629# Multimedia devices
630#
631# CONFIG_VIDEO_DEV is not set
632
633#
634# Digital Video Broadcasting Devices
635#
636# CONFIG_DVB is not set
637
638#
639# Graphics support
640#
641# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
642# CONFIG_FB is not set
643# CONFIG_FB_IBM_GXT4500 is not set
644
645#
646# Sound
647#
648# CONFIG_SOUND is not set
649
650#
651# HID Devices
652#
653CONFIG_HID=y
654# CONFIG_HID_DEBUG is not set
655
656#
657# USB support
658#
659CONFIG_USB_ARCH_HAS_HCD=y
660CONFIG_USB_ARCH_HAS_OHCI=y
661CONFIG_USB_ARCH_HAS_EHCI=y
662# CONFIG_USB is not set
663
664#
665# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
666#
667
668#
669# USB Gadget Support
670#
671# CONFIG_USB_GADGET is not set
672
673#
674# MMC/SD Card support
675#
676# CONFIG_MMC is not set
677
678#
679# LED devices
680#
681# CONFIG_NEW_LEDS is not set
682
683#
684# LED drivers
685#
686
687#
688# LED Triggers
689#
690
691#
692# InfiniBand support
693#
694# CONFIG_INFINIBAND is not set
695
696#
697# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
698#
699
700#
701# Real Time Clock
702#
703# CONFIG_RTC_CLASS is not set
704
705#
706# DMA Engine support
707#
708# CONFIG_DMA_ENGINE is not set
709
710#
711# DMA Clients
712#
713
714#
715# DMA Devices
716#
717
718#
719# Auxiliary Display support
720#
721
722#
723# Virtualization
724#
725
726#
727# File systems
728#
729CONFIG_EXT2_FS=y
730# CONFIG_EXT2_FS_XATTR is not set
731# CONFIG_EXT2_FS_XIP is not set
732CONFIG_EXT3_FS=y
733CONFIG_EXT3_FS_XATTR=y
734# CONFIG_EXT3_FS_POSIX_ACL is not set
735# CONFIG_EXT3_FS_SECURITY is not set
736# CONFIG_EXT4DEV_FS is not set
737CONFIG_JBD=y
738# CONFIG_JBD_DEBUG is not set
739CONFIG_FS_MBCACHE=y
740# CONFIG_REISERFS_FS is not set
741# CONFIG_JFS_FS is not set
742CONFIG_FS_POSIX_ACL=y
743# CONFIG_XFS_FS is not set
744# CONFIG_GFS2_FS is not set
745# CONFIG_OCFS2_FS is not set
746# CONFIG_MINIX_FS is not set
747# CONFIG_ROMFS_FS is not set
748CONFIG_INOTIFY=y
749CONFIG_INOTIFY_USER=y
750# CONFIG_QUOTA is not set
751CONFIG_DNOTIFY=y
752# CONFIG_AUTOFS_FS is not set
753# CONFIG_AUTOFS4_FS is not set
754# CONFIG_FUSE_FS is not set
755
756#
757# CD-ROM/DVD Filesystems
758#
759# CONFIG_ISO9660_FS is not set
760# CONFIG_UDF_FS is not set
761
762#
763# DOS/FAT/NT Filesystems
764#
765# CONFIG_MSDOS_FS is not set
766# CONFIG_VFAT_FS is not set
767# CONFIG_NTFS_FS is not set
768
769#
770# Pseudo filesystems
771#
772CONFIG_PROC_FS=y
773CONFIG_PROC_KCORE=y
774CONFIG_PROC_SYSCTL=y
775CONFIG_SYSFS=y
776CONFIG_TMPFS=y
777# CONFIG_TMPFS_POSIX_ACL is not set
778# CONFIG_HUGETLB_PAGE is not set
779CONFIG_RAMFS=y
780# CONFIG_CONFIGFS_FS is not set
781
782#
783# Miscellaneous filesystems
784#
785# CONFIG_ADFS_FS is not set
786# CONFIG_AFFS_FS is not set
787# CONFIG_HFS_FS is not set
788# CONFIG_HFSPLUS_FS is not set
789# CONFIG_BEFS_FS is not set
790# CONFIG_BFS_FS is not set
791# CONFIG_EFS_FS is not set
792# CONFIG_CRAMFS is not set
793# CONFIG_VXFS_FS is not set
794# CONFIG_HPFS_FS is not set
795# CONFIG_QNX4FS_FS is not set
796# CONFIG_SYSV_FS is not set
797# CONFIG_UFS_FS is not set
798
799#
800# Network File Systems
801#
802CONFIG_NFS_FS=y
803CONFIG_NFS_V3=y
804CONFIG_NFS_V3_ACL=y
805CONFIG_NFS_V4=y
806# CONFIG_NFS_DIRECTIO is not set
807# CONFIG_NFSD is not set
808CONFIG_ROOT_NFS=y
809CONFIG_LOCKD=y
810CONFIG_LOCKD_V4=y
811CONFIG_NFS_ACL_SUPPORT=y
812CONFIG_NFS_COMMON=y
813CONFIG_SUNRPC=y
814CONFIG_SUNRPC_GSS=y
815CONFIG_RPCSEC_GSS_KRB5=y
816# CONFIG_RPCSEC_GSS_SPKM3 is not set
817# CONFIG_SMB_FS is not set
818# CONFIG_CIFS is not set
819# CONFIG_NCP_FS is not set
820# CONFIG_CODA_FS is not set
821# CONFIG_AFS_FS is not set
822# CONFIG_9P_FS is not set
823
824#
825# Partition Types
826#
827CONFIG_PARTITION_ADVANCED=y
828# CONFIG_ACORN_PARTITION is not set
829# CONFIG_OSF_PARTITION is not set
830# CONFIG_AMIGA_PARTITION is not set
831# CONFIG_ATARI_PARTITION is not set
832# CONFIG_MAC_PARTITION is not set
833# CONFIG_MSDOS_PARTITION is not set
834# CONFIG_LDM_PARTITION is not set
835# CONFIG_SGI_PARTITION is not set
836# CONFIG_ULTRIX_PARTITION is not set
837# CONFIG_SUN_PARTITION is not set
838# CONFIG_KARMA_PARTITION is not set
839# CONFIG_EFI_PARTITION is not set
840
841#
842# Native Language Support
843#
844# CONFIG_NLS is not set
845
846#
847# Distributed Lock Manager
848#
849# CONFIG_DLM is not set
850# CONFIG_SCC_ENET is not set
851# CONFIG_FEC_ENET is not set
852
853#
854# CPM2 Options
855#
856
857#
858# Library routines
859#
860# CONFIG_CRC_CCITT is not set
861# CONFIG_CRC16 is not set
862# CONFIG_CRC32 is not set
863# CONFIG_LIBCRC32C is not set
864CONFIG_PLIST=y
865CONFIG_HAS_IOMEM=y
866CONFIG_HAS_IOPORT=y
867# CONFIG_PROFILING is not set
868
869#
870# Kernel hacking
871#
872# CONFIG_PRINTK_TIME is not set
873CONFIG_ENABLE_MUST_CHECK=y
874# CONFIG_MAGIC_SYSRQ is not set
875# CONFIG_UNUSED_SYMBOLS is not set
876# CONFIG_DEBUG_FS is not set
877# CONFIG_HEADERS_CHECK is not set
878# CONFIG_DEBUG_KERNEL is not set
879CONFIG_LOG_BUF_SHIFT=14
880# CONFIG_DEBUG_BUGVERBOSE is not set
881# CONFIG_KGDB_CONSOLE is not set
882
883#
884# Security options
885#
886# CONFIG_KEYS is not set
887# CONFIG_SECURITY is not set
888
889#
890# Cryptographic options
891#
892CONFIG_CRYPTO=y
893CONFIG_CRYPTO_ALGAPI=y
894CONFIG_CRYPTO_BLKCIPHER=y
895CONFIG_CRYPTO_MANAGER=y
896# CONFIG_CRYPTO_HMAC is not set
897# CONFIG_CRYPTO_XCBC is not set
898# CONFIG_CRYPTO_NULL is not set
899# CONFIG_CRYPTO_MD4 is not set
900CONFIG_CRYPTO_MD5=y
901# CONFIG_CRYPTO_SHA1 is not set
902# CONFIG_CRYPTO_SHA256 is not set
903# CONFIG_CRYPTO_SHA512 is not set
904# CONFIG_CRYPTO_WP512 is not set
905# CONFIG_CRYPTO_TGR192 is not set
906# CONFIG_CRYPTO_GF128MUL is not set
907CONFIG_CRYPTO_ECB=y
908CONFIG_CRYPTO_CBC=y
909CONFIG_CRYPTO_PCBC=y
910# CONFIG_CRYPTO_LRW is not set
911CONFIG_CRYPTO_DES=y
912# CONFIG_CRYPTO_FCRYPT is not set
913# CONFIG_CRYPTO_BLOWFISH is not set
914# CONFIG_CRYPTO_TWOFISH is not set
915# CONFIG_CRYPTO_SERPENT is not set
916# CONFIG_CRYPTO_AES is not set
917# CONFIG_CRYPTO_CAST5 is not set
918# CONFIG_CRYPTO_CAST6 is not set
919# CONFIG_CRYPTO_TEA is not set
920# CONFIG_CRYPTO_ARC4 is not set
921# CONFIG_CRYPTO_KHAZAD is not set
922# CONFIG_CRYPTO_ANUBIS is not set
923# CONFIG_CRYPTO_DEFLATE is not set
924# CONFIG_CRYPTO_MICHAEL_MIC is not set
925# CONFIG_CRYPTO_CRC32C is not set
926# CONFIG_CRYPTO_CAMELLIA is not set
927
928#
929# Hardware crypto devices
930#
diff --git a/arch/ppc/configs/mpc86x_ads_defconfig b/arch/ppc/configs/mpc86x_ads_defconfig
deleted file mode 100644
index f63c6f59d68a..000000000000
--- a/arch/ppc/configs/mpc86x_ads_defconfig
+++ /dev/null
@@ -1,633 +0,0 @@
1#
2# Automatically generated make config: don't edit
3# Linux kernel version: 2.6.12-rc4
4# Tue Jun 14 13:36:35 2005
5#
6CONFIG_MMU=y
7CONFIG_GENERIC_HARDIRQS=y
8CONFIG_RWSEM_XCHGADD_ALGORITHM=y
9CONFIG_GENERIC_CALIBRATE_DELAY=y
10CONFIG_HAVE_DEC_LOCK=y
11CONFIG_PPC=y
12CONFIG_PPC32=y
13CONFIG_GENERIC_NVRAM=y
14CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
15
16#
17# Code maturity level options
18#
19CONFIG_EXPERIMENTAL=y
20# CONFIG_CLEAN_COMPILE is not set
21CONFIG_BROKEN=y
22CONFIG_BROKEN_ON_SMP=y
23CONFIG_INIT_ENV_ARG_LIMIT=32
24
25#
26# General setup
27#
28CONFIG_LOCALVERSION=""
29# CONFIG_SWAP is not set
30CONFIG_SYSVIPC=y
31# CONFIG_POSIX_MQUEUE is not set
32# CONFIG_BSD_PROCESS_ACCT is not set
33CONFIG_SYSCTL=y
34# CONFIG_AUDIT is not set
35# CONFIG_HOTPLUG is not set
36CONFIG_KOBJECT_UEVENT=y
37# CONFIG_IKCONFIG is not set
38CONFIG_EMBEDDED=y
39# CONFIG_KALLSYMS is not set
40CONFIG_PRINTK=y
41CONFIG_BUG=y
42# CONFIG_BASE_FULL is not set
43CONFIG_FUTEX=y
44# CONFIG_EPOLL is not set
45# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
46# CONFIG_SHMEM is not set
47CONFIG_CC_ALIGN_FUNCTIONS=0
48CONFIG_CC_ALIGN_LABELS=0
49CONFIG_CC_ALIGN_LOOPS=0
50CONFIG_CC_ALIGN_JUMPS=0
51CONFIG_TINY_SHMEM=y
52CONFIG_BASE_SMALL=1
53
54#
55# Loadable module support
56#
57CONFIG_MODULES=y
58# CONFIG_MODULE_UNLOAD is not set
59CONFIG_OBSOLETE_MODPARM=y
60# CONFIG_MODVERSIONS is not set
61# CONFIG_MODULE_SRCVERSION_ALL is not set
62# CONFIG_KMOD is not set
63
64#
65# Processor
66#
67# CONFIG_6xx is not set
68# CONFIG_40x is not set
69# CONFIG_44x is not set
70# CONFIG_POWER3 is not set
71# CONFIG_POWER4 is not set
72CONFIG_8xx=y
73# CONFIG_E500 is not set
74# CONFIG_MATH_EMULATION is not set
75# CONFIG_CPU_FREQ is not set
76CONFIG_EMBEDDEDBOOT=y
77# CONFIG_PM is not set
78CONFIG_NOT_COHERENT_CACHE=y
79
80#
81# Platform options
82#
83CONFIG_FADS=y
84# CONFIG_RPXLITE is not set
85# CONFIG_RPXCLASSIC is not set
86# CONFIG_BSEIP is not set
87# CONFIG_MPC8XXFADS is not set
88CONFIG_MPC86XADS=y
89# CONFIG_TQM823L is not set
90# CONFIG_TQM850L is not set
91# CONFIG_TQM855L is not set
92# CONFIG_TQM860L is not set
93# CONFIG_FPS850L is not set
94# CONFIG_SPD823TS is not set
95# CONFIG_IVMS8 is not set
96# CONFIG_IVML24 is not set
97# CONFIG_SM850 is not set
98# CONFIG_HERMES_PRO is not set
99# CONFIG_IP860 is not set
100# CONFIG_LWMON is not set
101# CONFIG_PCU_E is not set
102# CONFIG_CCM is not set
103# CONFIG_LANTEC is not set
104# CONFIG_MBX is not set
105# CONFIG_WINCEPT is not set
106# CONFIG_SMP is not set
107# CONFIG_PREEMPT is not set
108# CONFIG_HIGHMEM is not set
109CONFIG_BINFMT_ELF=y
110# CONFIG_BINFMT_MISC is not set
111# CONFIG_CMDLINE_BOOL is not set
112CONFIG_ISA_DMA_API=y
113
114#
115# Bus options
116#
117# CONFIG_PCI is not set
118# CONFIG_PCI_DOMAINS is not set
119# CONFIG_PCI_QSPAN is not set
120
121#
122# PCCARD (PCMCIA/CardBus) support
123#
124# CONFIG_PCCARD is not set
125
126#
127# Advanced setup
128#
129# CONFIG_ADVANCED_OPTIONS is not set
130
131#
132# Default settings for advanced configuration options are used
133#
134CONFIG_HIGHMEM_START=0xfe000000
135CONFIG_LOWMEM_SIZE=0x30000000
136CONFIG_KERNEL_START=0xc0000000
137CONFIG_TASK_SIZE=0x80000000
138CONFIG_CONSISTENT_START=0xff100000
139CONFIG_CONSISTENT_SIZE=0x00200000
140CONFIG_BOOT_LOAD=0x00400000
141
142#
143# Device Drivers
144#
145
146#
147# Generic Driver Options
148#
149# CONFIG_STANDALONE is not set
150CONFIG_PREVENT_FIRMWARE_BUILD=y
151# CONFIG_FW_LOADER is not set
152
153#
154# Memory Technology Devices (MTD)
155#
156# CONFIG_MTD is not set
157
158#
159# Parallel port support
160#
161# CONFIG_PARPORT is not set
162
163#
164# Plug and Play support
165#
166
167#
168# Block devices
169#
170# CONFIG_BLK_DEV_FD is not set
171# CONFIG_BLK_DEV_COW_COMMON is not set
172CONFIG_BLK_DEV_LOOP=y
173# CONFIG_BLK_DEV_CRYPTOLOOP is not set
174# CONFIG_BLK_DEV_NBD is not set
175# CONFIG_BLK_DEV_RAM is not set
176CONFIG_BLK_DEV_RAM_COUNT=16
177CONFIG_INITRAMFS_SOURCE=""
178# CONFIG_LBD is not set
179# CONFIG_CDROM_PKTCDVD is not set
180
181#
182# IO Schedulers
183#
184CONFIG_IOSCHED_NOOP=y
185CONFIG_IOSCHED_AS=y
186CONFIG_IOSCHED_DEADLINE=y
187CONFIG_IOSCHED_CFQ=y
188# CONFIG_ATA_OVER_ETH is not set
189
190#
191# ATA/ATAPI/MFM/RLL support
192#
193# CONFIG_IDE is not set
194
195#
196# SCSI device support
197#
198# CONFIG_SCSI is not set
199
200#
201# Multi-device support (RAID and LVM)
202#
203# CONFIG_MD is not set
204
205#
206# Fusion MPT device support
207#
208
209#
210# IEEE 1394 (FireWire) support
211#
212# CONFIG_IEEE1394 is not set
213
214#
215# I2O device support
216#
217
218#
219# Macintosh device drivers
220#
221
222#
223# Networking support
224#
225CONFIG_NET=y
226
227#
228# Networking options
229#
230CONFIG_PACKET=y
231# CONFIG_PACKET_MMAP is not set
232CONFIG_UNIX=y
233# CONFIG_NET_KEY is not set
234CONFIG_INET=y
235# CONFIG_IP_MULTICAST is not set
236# CONFIG_IP_ADVANCED_ROUTER is not set
237CONFIG_IP_PNP=y
238CONFIG_IP_PNP_DHCP=y
239# CONFIG_IP_PNP_BOOTP is not set
240# CONFIG_IP_PNP_RARP is not set
241# CONFIG_NET_IPIP is not set
242# CONFIG_NET_IPGRE is not set
243# CONFIG_ARPD is not set
244# CONFIG_SYN_COOKIES is not set
245# CONFIG_INET_AH is not set
246# CONFIG_INET_ESP is not set
247# CONFIG_INET_IPCOMP is not set
248# CONFIG_INET_TUNNEL is not set
249CONFIG_IP_TCPDIAG=y
250# CONFIG_IP_TCPDIAG_IPV6 is not set
251CONFIG_IPV6=m
252# CONFIG_IPV6_PRIVACY is not set
253# CONFIG_INET6_AH is not set
254# CONFIG_INET6_ESP is not set
255# CONFIG_INET6_IPCOMP is not set
256# CONFIG_INET6_TUNNEL is not set
257# CONFIG_IPV6_TUNNEL is not set
258# CONFIG_NETFILTER is not set
259
260#
261# SCTP Configuration (EXPERIMENTAL)
262#
263# CONFIG_IP_SCTP is not set
264# CONFIG_ATM is not set
265# CONFIG_BRIDGE is not set
266# CONFIG_VLAN_8021Q is not set
267# CONFIG_DECNET is not set
268# CONFIG_LLC2 is not set
269# CONFIG_IPX is not set
270# CONFIG_ATALK is not set
271# CONFIG_X25 is not set
272# CONFIG_LAPB is not set
273# CONFIG_NET_DIVERT is not set
274# CONFIG_ECONET is not set
275# CONFIG_WAN_ROUTER is not set
276
277#
278# QoS and/or fair queueing
279#
280# CONFIG_NET_SCHED is not set
281# CONFIG_NET_CLS_ROUTE is not set
282
283#
284# Network testing
285#
286# CONFIG_NET_PKTGEN is not set
287# CONFIG_NETPOLL is not set
288# CONFIG_NET_POLL_CONTROLLER is not set
289# CONFIG_HAMRADIO is not set
290# CONFIG_IRDA is not set
291# CONFIG_BT is not set
292CONFIG_NETDEVICES=y
293# CONFIG_DUMMY is not set
294# CONFIG_BONDING is not set
295# CONFIG_EQUALIZER is not set
296# CONFIG_TUN is not set
297
298#
299# Ethernet (10 or 100Mbit)
300#
301CONFIG_NET_ETHERNET=y
302# CONFIG_MII is not set
303# CONFIG_OAKNET is not set
304
305#
306# Ethernet (1000 Mbit)
307#
308
309#
310# Ethernet (10000 Mbit)
311#
312
313#
314# Token Ring devices
315#
316
317#
318# Wireless LAN (non-hamradio)
319#
320# CONFIG_NET_RADIO is not set
321
322#
323# Wan interfaces
324#
325# CONFIG_WAN is not set
326# CONFIG_PPP is not set
327# CONFIG_SLIP is not set
328# CONFIG_SHAPER is not set
329# CONFIG_NETCONSOLE is not set
330
331#
332# ISDN subsystem
333#
334# CONFIG_ISDN is not set
335
336#
337# Telephony Support
338#
339# CONFIG_PHONE is not set
340
341#
342# Input device support
343#
344# CONFIG_INPUT is not set
345
346#
347# Hardware I/O ports
348#
349# CONFIG_SERIO is not set
350# CONFIG_GAMEPORT is not set
351CONFIG_SOUND_GAMEPORT=y
352
353#
354# Character devices
355#
356# CONFIG_VT is not set
357# CONFIG_SERIAL_NONSTANDARD is not set
358
359#
360# Serial drivers
361#
362# CONFIG_SERIAL_8250 is not set
363
364#
365# Non-8250 serial port support
366#
367CONFIG_SERIAL_CORE=y
368CONFIG_SERIAL_CORE_CONSOLE=y
369CONFIG_SERIAL_CPM=y
370CONFIG_SERIAL_CPM_CONSOLE=y
371# CONFIG_SERIAL_CPM_SCC1 is not set
372# CONFIG_SERIAL_CPM_SCC2 is not set
373# CONFIG_SERIAL_CPM_SCC3 is not set
374# CONFIG_SERIAL_CPM_SCC4 is not set
375CONFIG_SERIAL_CPM_SMC1=y
376# CONFIG_SERIAL_CPM_SMC2 is not set
377CONFIG_UNIX98_PTYS=y
378# CONFIG_LEGACY_PTYS is not set
379
380#
381# IPMI
382#
383# CONFIG_IPMI_HANDLER is not set
384
385#
386# Watchdog Cards
387#
388# CONFIG_WATCHDOG is not set
389# CONFIG_NVRAM is not set
390# CONFIG_GEN_RTC is not set
391# CONFIG_DTLK is not set
392# CONFIG_R3964 is not set
393
394#
395# Ftape, the floppy tape device driver
396#
397# CONFIG_AGP is not set
398# CONFIG_DRM is not set
399# CONFIG_RAW_DRIVER is not set
400
401#
402# TPM devices
403#
404
405#
406# I2C support
407#
408# CONFIG_I2C is not set
409
410#
411# Dallas's 1-wire bus
412#
413# CONFIG_W1 is not set
414
415#
416# Misc devices
417#
418
419#
420# Multimedia devices
421#
422# CONFIG_VIDEO_DEV is not set
423
424#
425# Digital Video Broadcasting Devices
426#
427# CONFIG_DVB is not set
428
429#
430# Graphics support
431#
432# CONFIG_FB is not set
433
434#
435# Sound
436#
437# CONFIG_SOUND is not set
438
439#
440# USB support
441#
442# CONFIG_USB_ARCH_HAS_HCD is not set
443# CONFIG_USB_ARCH_HAS_OHCI is not set
444
445#
446# USB Gadget Support
447#
448# CONFIG_USB_GADGET is not set
449
450#
451# MMC/SD Card support
452#
453# CONFIG_MMC is not set
454
455#
456# InfiniBand support
457#
458# CONFIG_INFINIBAND is not set
459
460#
461# File systems
462#
463# CONFIG_EXT2_FS is not set
464CONFIG_EXT3_FS=y
465# CONFIG_EXT3_FS_XATTR is not set
466CONFIG_JBD=y
467# CONFIG_JBD_DEBUG is not set
468# CONFIG_REISERFS_FS is not set
469# CONFIG_JFS_FS is not set
470
471#
472# XFS support
473#
474# CONFIG_XFS_FS is not set
475# CONFIG_MINIX_FS is not set
476# CONFIG_ROMFS_FS is not set
477# CONFIG_QUOTA is not set
478# CONFIG_DNOTIFY is not set
479# CONFIG_AUTOFS_FS is not set
480# CONFIG_AUTOFS4_FS is not set
481
482#
483# CD-ROM/DVD Filesystems
484#
485# CONFIG_ISO9660_FS is not set
486# CONFIG_UDF_FS is not set
487
488#
489# DOS/FAT/NT Filesystems
490#
491# CONFIG_MSDOS_FS is not set
492# CONFIG_VFAT_FS is not set
493# CONFIG_NTFS_FS is not set
494
495#
496# Pseudo filesystems
497#
498CONFIG_PROC_FS=y
499CONFIG_PROC_KCORE=y
500CONFIG_SYSFS=y
501# CONFIG_DEVFS_FS is not set
502# CONFIG_DEVPTS_FS_XATTR is not set
503# CONFIG_TMPFS is not set
504# CONFIG_HUGETLBFS is not set
505# CONFIG_HUGETLB_PAGE is not set
506CONFIG_RAMFS=y
507
508#
509# Miscellaneous filesystems
510#
511# CONFIG_ADFS_FS is not set
512# CONFIG_AFFS_FS is not set
513# CONFIG_HFS_FS is not set
514# CONFIG_HFSPLUS_FS is not set
515# CONFIG_BEFS_FS is not set
516# CONFIG_BFS_FS is not set
517# CONFIG_EFS_FS is not set
518# CONFIG_CRAMFS is not set
519# CONFIG_VXFS_FS is not set
520# CONFIG_HPFS_FS is not set
521# CONFIG_QNX4FS_FS is not set
522# CONFIG_SYSV_FS is not set
523# CONFIG_UFS_FS is not set
524
525#
526# Network File Systems
527#
528CONFIG_NFS_FS=y
529CONFIG_NFS_V3=y
530CONFIG_NFS_V4=y
531# CONFIG_NFS_DIRECTIO is not set
532# CONFIG_NFSD is not set
533CONFIG_ROOT_NFS=y
534CONFIG_LOCKD=y
535CONFIG_LOCKD_V4=y
536CONFIG_SUNRPC=y
537CONFIG_SUNRPC_GSS=y
538CONFIG_RPCSEC_GSS_KRB5=y
539# CONFIG_RPCSEC_GSS_SPKM3 is not set
540# CONFIG_SMB_FS is not set
541# CONFIG_CIFS is not set
542# CONFIG_NCP_FS is not set
543# CONFIG_CODA_FS is not set
544# CONFIG_AFS_FS is not set
545
546#
547# Partition Types
548#
549# CONFIG_PARTITION_ADVANCED is not set
550CONFIG_MSDOS_PARTITION=y
551
552#
553# Native Language Support
554#
555# CONFIG_NLS is not set
556
557#
558# MPC8xx CPM Options
559#
560CONFIG_SCC_ENET=y
561CONFIG_SCC1_ENET=y
562# CONFIG_SCC2_ENET is not set
563# CONFIG_SCC3_ENET is not set
564# CONFIG_FEC_ENET is not set
565# CONFIG_ENET_BIG_BUFFERS is not set
566
567#
568# Generic MPC8xx Options
569#
570# CONFIG_8xx_COPYBACK is not set
571# CONFIG_8xx_CPU6 is not set
572CONFIG_NO_UCODE_PATCH=y
573# CONFIG_USB_SOF_UCODE_PATCH is not set
574# CONFIG_I2C_SPI_UCODE_PATCH is not set
575# CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set
576
577#
578# Library routines
579#
580# CONFIG_CRC_CCITT is not set
581# CONFIG_CRC32 is not set
582# CONFIG_LIBCRC32C is not set
583
584#
585# Profiling support
586#
587# CONFIG_PROFILING is not set
588
589#
590# Kernel hacking
591#
592# CONFIG_PRINTK_TIME is not set
593# CONFIG_DEBUG_KERNEL is not set
594CONFIG_LOG_BUF_SHIFT=14
595
596#
597# Security options
598#
599# CONFIG_KEYS is not set
600# CONFIG_SECURITY is not set
601
602#
603# Cryptographic options
604#
605CONFIG_CRYPTO=y
606# CONFIG_CRYPTO_HMAC is not set
607# CONFIG_CRYPTO_NULL is not set
608# CONFIG_CRYPTO_MD4 is not set
609CONFIG_CRYPTO_MD5=y
610# CONFIG_CRYPTO_SHA1 is not set
611# CONFIG_CRYPTO_SHA256 is not set
612# CONFIG_CRYPTO_SHA512 is not set
613# CONFIG_CRYPTO_WP512 is not set
614# CONFIG_CRYPTO_TGR192 is not set
615CONFIG_CRYPTO_DES=y
616# CONFIG_CRYPTO_BLOWFISH is not set
617# CONFIG_CRYPTO_TWOFISH is not set
618# CONFIG_CRYPTO_SERPENT is not set
619# CONFIG_CRYPTO_AES is not set
620# CONFIG_CRYPTO_CAST5 is not set
621# CONFIG_CRYPTO_CAST6 is not set
622# CONFIG_CRYPTO_TEA is not set
623# CONFIG_CRYPTO_ARC4 is not set
624# CONFIG_CRYPTO_KHAZAD is not set
625# CONFIG_CRYPTO_ANUBIS is not set
626# CONFIG_CRYPTO_DEFLATE is not set
627# CONFIG_CRYPTO_MICHAEL_MIC is not set
628# CONFIG_CRYPTO_CRC32C is not set
629# CONFIG_CRYPTO_TEST is not set
630
631#
632# Hardware crypto devices
633#
diff --git a/arch/ppc/configs/mpc885ads_defconfig b/arch/ppc/configs/mpc885ads_defconfig
deleted file mode 100644
index 016f94d9325f..000000000000
--- a/arch/ppc/configs/mpc885ads_defconfig
+++ /dev/null
@@ -1,622 +0,0 @@
1#
2# Automatically generated make config: don't edit
3# Linux kernel version: 2.6.12-rc6
4# Thu Jun 9 21:17:29 2005
5#
6CONFIG_MMU=y
7CONFIG_GENERIC_HARDIRQS=y
8CONFIG_RWSEM_XCHGADD_ALGORITHM=y
9CONFIG_GENERIC_CALIBRATE_DELAY=y
10CONFIG_HAVE_DEC_LOCK=y
11CONFIG_PPC=y
12CONFIG_PPC32=y
13CONFIG_GENERIC_NVRAM=y
14CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
15
16#
17# Code maturity level options
18#
19CONFIG_EXPERIMENTAL=y
20# CONFIG_CLEAN_COMPILE is not set
21CONFIG_BROKEN=y
22CONFIG_BROKEN_ON_SMP=y
23CONFIG_INIT_ENV_ARG_LIMIT=32
24
25#
26# General setup
27#
28CONFIG_LOCALVERSION=""
29# CONFIG_SWAP is not set
30CONFIG_SYSVIPC=y
31# CONFIG_POSIX_MQUEUE is not set
32# CONFIG_BSD_PROCESS_ACCT is not set
33CONFIG_SYSCTL=y
34# CONFIG_AUDIT is not set
35CONFIG_HOTPLUG=y
36CONFIG_KOBJECT_UEVENT=y
37# CONFIG_IKCONFIG is not set
38CONFIG_EMBEDDED=y
39# CONFIG_KALLSYMS is not set
40CONFIG_PRINTK=y
41CONFIG_BUG=y
42CONFIG_BASE_FULL=y
43CONFIG_FUTEX=y
44# CONFIG_EPOLL is not set
45# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
46CONFIG_SHMEM=y
47CONFIG_CC_ALIGN_FUNCTIONS=0
48CONFIG_CC_ALIGN_LABELS=0
49CONFIG_CC_ALIGN_LOOPS=0
50CONFIG_CC_ALIGN_JUMPS=0
51# CONFIG_TINY_SHMEM is not set
52CONFIG_BASE_SMALL=0
53
54#
55# Loadable module support
56#
57# CONFIG_MODULES is not set
58
59#
60# Processor
61#
62# CONFIG_6xx is not set
63# CONFIG_40x is not set
64# CONFIG_44x is not set
65# CONFIG_POWER3 is not set
66# CONFIG_POWER4 is not set
67CONFIG_8xx=y
68# CONFIG_E500 is not set
69# CONFIG_MATH_EMULATION is not set
70# CONFIG_CPU_FREQ is not set
71CONFIG_EMBEDDEDBOOT=y
72# CONFIG_PM is not set
73CONFIG_NOT_COHERENT_CACHE=y
74
75#
76# Platform options
77#
78# CONFIG_RPXLITE is not set
79# CONFIG_RPXCLASSIC is not set
80# CONFIG_BSEIP is not set
81# CONFIG_FADS is not set
82CONFIG_MPC885ADS=y
83# CONFIG_TQM823L is not set
84# CONFIG_TQM850L is not set
85# CONFIG_TQM855L is not set
86# CONFIG_TQM860L is not set
87# CONFIG_FPS850L is not set
88# CONFIG_SPD823TS is not set
89# CONFIG_IVMS8 is not set
90# CONFIG_IVML24 is not set
91# CONFIG_SM850 is not set
92# CONFIG_HERMES_PRO is not set
93# CONFIG_IP860 is not set
94# CONFIG_LWMON is not set
95# CONFIG_PCU_E is not set
96# CONFIG_CCM is not set
97# CONFIG_LANTEC is not set
98# CONFIG_MBX is not set
99# CONFIG_WINCEPT is not set
100# CONFIG_SMP is not set
101# CONFIG_PREEMPT is not set
102# CONFIG_HIGHMEM is not set
103CONFIG_BINFMT_ELF=y
104# CONFIG_BINFMT_MISC is not set
105# CONFIG_CMDLINE_BOOL is not set
106CONFIG_ISA_DMA_API=y
107
108#
109# Bus options
110#
111# CONFIG_PCI is not set
112# CONFIG_PCI_DOMAINS is not set
113# CONFIG_PCI_QSPAN is not set
114
115#
116# PCCARD (PCMCIA/CardBus) support
117#
118# CONFIG_PCCARD is not set
119
120#
121# Advanced setup
122#
123# CONFIG_ADVANCED_OPTIONS is not set
124
125#
126# Default settings for advanced configuration options are used
127#
128CONFIG_HIGHMEM_START=0xfe000000
129CONFIG_LOWMEM_SIZE=0x30000000
130CONFIG_KERNEL_START=0xc0000000
131CONFIG_TASK_SIZE=0x80000000
132CONFIG_CONSISTENT_START=0xff100000
133CONFIG_CONSISTENT_SIZE=0x00200000
134CONFIG_BOOT_LOAD=0x00400000
135
136#
137# Device Drivers
138#
139
140#
141# Generic Driver Options
142#
143CONFIG_STANDALONE=y
144CONFIG_PREVENT_FIRMWARE_BUILD=y
145# CONFIG_FW_LOADER is not set
146
147#
148# Memory Technology Devices (MTD)
149#
150# CONFIG_MTD is not set
151
152#
153# Parallel port support
154#
155# CONFIG_PARPORT is not set
156
157#
158# Plug and Play support
159#
160
161#
162# Block devices
163#
164# CONFIG_BLK_DEV_FD is not set
165# CONFIG_BLK_DEV_COW_COMMON is not set
166# CONFIG_BLK_DEV_LOOP is not set
167# CONFIG_BLK_DEV_NBD is not set
168# CONFIG_BLK_DEV_RAM is not set
169CONFIG_BLK_DEV_RAM_COUNT=16
170CONFIG_INITRAMFS_SOURCE=""
171# CONFIG_LBD is not set
172# CONFIG_CDROM_PKTCDVD is not set
173
174#
175# IO Schedulers
176#
177CONFIG_IOSCHED_NOOP=y
178# CONFIG_IOSCHED_AS is not set
179# CONFIG_IOSCHED_DEADLINE is not set
180# CONFIG_IOSCHED_CFQ is not set
181# CONFIG_ATA_OVER_ETH is not set
182
183#
184# ATA/ATAPI/MFM/RLL support
185#
186# CONFIG_IDE is not set
187
188#
189# SCSI device support
190#
191# CONFIG_SCSI is not set
192
193#
194# Multi-device support (RAID and LVM)
195#
196# CONFIG_MD is not set
197
198#
199# Fusion MPT device support
200#
201
202#
203# IEEE 1394 (FireWire) support
204#
205# CONFIG_IEEE1394 is not set
206
207#
208# I2O device support
209#
210
211#
212# Macintosh device drivers
213#
214
215#
216# Networking support
217#
218CONFIG_NET=y
219
220#
221# Networking options
222#
223CONFIG_PACKET=y
224# CONFIG_PACKET_MMAP is not set
225CONFIG_UNIX=y
226# CONFIG_NET_KEY is not set
227CONFIG_INET=y
228# CONFIG_IP_MULTICAST is not set
229# CONFIG_IP_ADVANCED_ROUTER is not set
230CONFIG_IP_PNP=y
231CONFIG_IP_PNP_DHCP=y
232CONFIG_IP_PNP_BOOTP=y
233# CONFIG_IP_PNP_RARP is not set
234# CONFIG_NET_IPIP is not set
235# CONFIG_NET_IPGRE is not set
236# CONFIG_ARPD is not set
237# CONFIG_SYN_COOKIES is not set
238# CONFIG_INET_AH is not set
239# CONFIG_INET_ESP is not set
240# CONFIG_INET_IPCOMP is not set
241# CONFIG_INET_TUNNEL is not set
242CONFIG_IP_TCPDIAG=y
243# CONFIG_IP_TCPDIAG_IPV6 is not set
244# CONFIG_IPV6 is not set
245# CONFIG_NETFILTER is not set
246
247#
248# SCTP Configuration (EXPERIMENTAL)
249#
250# CONFIG_IP_SCTP is not set
251# CONFIG_ATM is not set
252# CONFIG_BRIDGE is not set
253# CONFIG_VLAN_8021Q is not set
254# CONFIG_DECNET is not set
255# CONFIG_LLC2 is not set
256# CONFIG_IPX is not set
257# CONFIG_ATALK is not set
258# CONFIG_X25 is not set
259# CONFIG_LAPB is not set
260# CONFIG_NET_DIVERT is not set
261# CONFIG_ECONET is not set
262# CONFIG_WAN_ROUTER is not set
263
264#
265# QoS and/or fair queueing
266#
267# CONFIG_NET_SCHED is not set
268# CONFIG_NET_CLS_ROUTE is not set
269
270#
271# Network testing
272#
273# CONFIG_NET_PKTGEN is not set
274# CONFIG_NETPOLL is not set
275# CONFIG_NET_POLL_CONTROLLER is not set
276# CONFIG_HAMRADIO is not set
277# CONFIG_IRDA is not set
278# CONFIG_BT is not set
279CONFIG_NETDEVICES=y
280# CONFIG_DUMMY is not set
281# CONFIG_BONDING is not set
282# CONFIG_EQUALIZER is not set
283# CONFIG_TUN is not set
284
285#
286# Ethernet (10 or 100Mbit)
287#
288CONFIG_NET_ETHERNET=y
289CONFIG_MII=y
290# CONFIG_OAKNET is not set
291
292#
293# Ethernet (1000 Mbit)
294#
295
296#
297# Ethernet (10000 Mbit)
298#
299
300#
301# Token Ring devices
302#
303
304#
305# Wireless LAN (non-hamradio)
306#
307# CONFIG_NET_RADIO is not set
308
309#
310# Wan interfaces
311#
312# CONFIG_WAN is not set
313CONFIG_PPP=y
314# CONFIG_PPP_MULTILINK is not set
315# CONFIG_PPP_FILTER is not set
316CONFIG_PPP_ASYNC=y
317CONFIG_PPP_SYNC_TTY=y
318CONFIG_PPP_DEFLATE=y
319# CONFIG_PPP_BSDCOMP is not set
320# CONFIG_PPPOE is not set
321# CONFIG_SLIP is not set
322# CONFIG_SHAPER is not set
323# CONFIG_NETCONSOLE is not set
324
325#
326# ISDN subsystem
327#
328# CONFIG_ISDN is not set
329
330#
331# Telephony Support
332#
333# CONFIG_PHONE is not set
334
335#
336# Input device support
337#
338# CONFIG_INPUT is not set
339
340#
341# Hardware I/O ports
342#
343# CONFIG_SERIO is not set
344# CONFIG_GAMEPORT is not set
345
346#
347# Character devices
348#
349# CONFIG_VT is not set
350# CONFIG_SERIAL_NONSTANDARD is not set
351
352#
353# Serial drivers
354#
355# CONFIG_SERIAL_8250 is not set
356
357#
358# Non-8250 serial port support
359#
360CONFIG_SERIAL_CORE=y
361CONFIG_SERIAL_CORE_CONSOLE=y
362CONFIG_SERIAL_CPM=y
363CONFIG_SERIAL_CPM_CONSOLE=y
364# CONFIG_SERIAL_CPM_SCC1 is not set
365# CONFIG_SERIAL_CPM_SCC2 is not set
366# CONFIG_SERIAL_CPM_SCC3 is not set
367# CONFIG_SERIAL_CPM_SCC4 is not set
368CONFIG_SERIAL_CPM_SMC1=y
369CONFIG_SERIAL_CPM_SMC2=y
370CONFIG_UNIX98_PTYS=y
371# CONFIG_LEGACY_PTYS is not set
372
373#
374# IPMI
375#
376# CONFIG_IPMI_HANDLER is not set
377
378#
379# Watchdog Cards
380#
381# CONFIG_WATCHDOG is not set
382# CONFIG_NVRAM is not set
383# CONFIG_GEN_RTC is not set
384# CONFIG_DTLK is not set
385# CONFIG_R3964 is not set
386
387#
388# Ftape, the floppy tape device driver
389#
390# CONFIG_AGP is not set
391# CONFIG_DRM is not set
392# CONFIG_RAW_DRIVER is not set
393
394#
395# TPM devices
396#
397
398#
399# I2C support
400#
401# CONFIG_I2C is not set
402
403#
404# Dallas's 1-wire bus
405#
406# CONFIG_W1 is not set
407
408#
409# Misc devices
410#
411
412#
413# Multimedia devices
414#
415# CONFIG_VIDEO_DEV is not set
416
417#
418# Digital Video Broadcasting Devices
419#
420# CONFIG_DVB is not set
421
422#
423# Graphics support
424#
425# CONFIG_FB is not set
426
427#
428# Sound
429#
430# CONFIG_SOUND is not set
431
432#
433# USB support
434#
435# CONFIG_USB_ARCH_HAS_HCD is not set
436# CONFIG_USB_ARCH_HAS_OHCI is not set
437
438#
439# USB Gadget Support
440#
441# CONFIG_USB_GADGET is not set
442
443#
444# MMC/SD Card support
445#
446# CONFIG_MMC is not set
447
448#
449# InfiniBand support
450#
451# CONFIG_INFINIBAND is not set
452
453#
454# File systems
455#
456CONFIG_EXT2_FS=y
457CONFIG_EXT2_FS_XATTR=y
458# CONFIG_EXT2_FS_POSIX_ACL is not set
459# CONFIG_EXT2_FS_SECURITY is not set
460CONFIG_EXT3_FS=y
461CONFIG_EXT3_FS_XATTR=y
462# CONFIG_EXT3_FS_POSIX_ACL is not set
463# CONFIG_EXT3_FS_SECURITY is not set
464CONFIG_JBD=y
465# CONFIG_JBD_DEBUG is not set
466CONFIG_FS_MBCACHE=y
467# CONFIG_REISERFS_FS is not set
468# CONFIG_JFS_FS is not set
469
470#
471# XFS support
472#
473# CONFIG_XFS_FS is not set
474# CONFIG_MINIX_FS is not set
475# CONFIG_ROMFS_FS is not set
476# CONFIG_QUOTA is not set
477# CONFIG_DNOTIFY is not set
478# CONFIG_AUTOFS_FS is not set
479# CONFIG_AUTOFS4_FS is not set
480
481#
482# CD-ROM/DVD Filesystems
483#
484# CONFIG_ISO9660_FS is not set
485# CONFIG_UDF_FS is not set
486
487#
488# DOS/FAT/NT Filesystems
489#
490# CONFIG_MSDOS_FS is not set
491# CONFIG_VFAT_FS is not set
492# CONFIG_NTFS_FS is not set
493
494#
495# Pseudo filesystems
496#
497CONFIG_PROC_FS=y
498# CONFIG_PROC_KCORE is not set
499CONFIG_SYSFS=y
500# CONFIG_DEVFS_FS is not set
501# CONFIG_DEVPTS_FS_XATTR is not set
502# CONFIG_TMPFS is not set
503# CONFIG_HUGETLBFS is not set
504# CONFIG_HUGETLB_PAGE is not set
505CONFIG_RAMFS=y
506
507#
508# Miscellaneous filesystems
509#
510# CONFIG_ADFS_FS is not set
511# CONFIG_AFFS_FS is not set
512# CONFIG_HFS_FS is not set
513# CONFIG_HFSPLUS_FS is not set
514# CONFIG_BEFS_FS is not set
515# CONFIG_BFS_FS is not set
516# CONFIG_EFS_FS is not set
517# CONFIG_CRAMFS is not set
518# CONFIG_VXFS_FS is not set
519# CONFIG_HPFS_FS is not set
520# CONFIG_QNX4FS_FS is not set
521# CONFIG_SYSV_FS is not set
522# CONFIG_UFS_FS is not set
523
524#
525# Network File Systems
526#
527CONFIG_NFS_FS=y
528# CONFIG_NFS_V3 is not set
529# CONFIG_NFS_V4 is not set
530# CONFIG_NFS_DIRECTIO is not set
531# CONFIG_NFSD is not set
532CONFIG_ROOT_NFS=y
533CONFIG_LOCKD=y
534CONFIG_SUNRPC=y
535# CONFIG_RPCSEC_GSS_KRB5 is not set
536# CONFIG_RPCSEC_GSS_SPKM3 is not set
537# CONFIG_SMB_FS is not set
538# CONFIG_CIFS is not set
539# CONFIG_NCP_FS is not set
540# CONFIG_CODA_FS is not set
541# CONFIG_AFS_FS is not set
542
543#
544# Partition Types
545#
546CONFIG_PARTITION_ADVANCED=y
547# CONFIG_ACORN_PARTITION is not set
548# CONFIG_OSF_PARTITION is not set
549# CONFIG_AMIGA_PARTITION is not set
550# CONFIG_ATARI_PARTITION is not set
551# CONFIG_MAC_PARTITION is not set
552CONFIG_MSDOS_PARTITION=y
553# CONFIG_BSD_DISKLABEL is not set
554# CONFIG_MINIX_SUBPARTITION is not set
555# CONFIG_SOLARIS_X86_PARTITION is not set
556# CONFIG_UNIXWARE_DISKLABEL is not set
557# CONFIG_LDM_PARTITION is not set
558# CONFIG_SGI_PARTITION is not set
559# CONFIG_ULTRIX_PARTITION is not set
560# CONFIG_SUN_PARTITION is not set
561# CONFIG_EFI_PARTITION is not set
562
563#
564# Native Language Support
565#
566# CONFIG_NLS is not set
567
568#
569# MPC8xx CPM Options
570#
571CONFIG_SCC_ENET=y
572# CONFIG_SCC1_ENET is not set
573# CONFIG_SCC2_ENET is not set
574CONFIG_SCC3_ENET=y
575# CONFIG_FEC_ENET is not set
576# CONFIG_ENET_BIG_BUFFERS is not set
577
578#
579# Generic MPC8xx Options
580#
581CONFIG_8xx_COPYBACK=y
582CONFIG_8xx_CPU6=y
583CONFIG_NO_UCODE_PATCH=y
584# CONFIG_USB_SOF_UCODE_PATCH is not set
585# CONFIG_I2C_SPI_UCODE_PATCH is not set
586# CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set
587
588#
589# Library routines
590#
591CONFIG_CRC_CCITT=y
592# CONFIG_CRC32 is not set
593# CONFIG_LIBCRC32C is not set
594CONFIG_ZLIB_INFLATE=y
595CONFIG_ZLIB_DEFLATE=y
596
597#
598# Profiling support
599#
600# CONFIG_PROFILING is not set
601
602#
603# Kernel hacking
604#
605# CONFIG_PRINTK_TIME is not set
606# CONFIG_DEBUG_KERNEL is not set
607CONFIG_LOG_BUF_SHIFT=14
608
609#
610# Security options
611#
612# CONFIG_KEYS is not set
613# CONFIG_SECURITY is not set
614
615#
616# Cryptographic options
617#
618# CONFIG_CRYPTO is not set
619
620#
621# Hardware crypto devices
622#
diff --git a/arch/ppc/platforms/Makefile b/arch/ppc/platforms/Makefile
index 40f53fbe6d35..6260231987cb 100644
--- a/arch/ppc/platforms/Makefile
+++ b/arch/ppc/platforms/Makefile
@@ -4,7 +4,6 @@
4 4
5obj-$(CONFIG_PPC_PREP) += prep_pci.o prep_setup.o 5obj-$(CONFIG_PPC_PREP) += prep_pci.o prep_setup.o
6obj-$(CONFIG_PREP_RESIDUAL) += residual.o 6obj-$(CONFIG_PREP_RESIDUAL) += residual.o
7obj-$(CONFIG_PQ2ADS) += pq2ads.o
8obj-$(CONFIG_TQM8260) += tqm8260_setup.o 7obj-$(CONFIG_TQM8260) += tqm8260_setup.o
9obj-$(CONFIG_CPCI690) += cpci690.o 8obj-$(CONFIG_CPCI690) += cpci690.o
10obj-$(CONFIG_EV64260) += ev64260.o 9obj-$(CONFIG_EV64260) += ev64260.o
@@ -24,6 +23,3 @@ obj-$(CONFIG_SBC82xx) += sbc82xx.o
24obj-$(CONFIG_SPRUCE) += spruce.o 23obj-$(CONFIG_SPRUCE) += spruce.o
25obj-$(CONFIG_LITE5200) += lite5200.o 24obj-$(CONFIG_LITE5200) += lite5200.o
26obj-$(CONFIG_EV64360) += ev64360.o 25obj-$(CONFIG_EV64360) += ev64360.o
27obj-$(CONFIG_MPC86XADS) += mpc866ads_setup.o
28obj-$(CONFIG_MPC885ADS) += mpc885ads_setup.o
29obj-$(CONFIG_ADS8272) += mpc8272ads_setup.o
diff --git a/arch/ppc/platforms/fads.h b/arch/ppc/platforms/fads.h
index 2f9f0f60e3f7..5219366667b3 100644
--- a/arch/ppc/platforms/fads.h
+++ b/arch/ppc/platforms/fads.h
@@ -22,29 +22,6 @@
22 22
23#include <asm/ppcboot.h> 23#include <asm/ppcboot.h>
24 24
25#if defined(CONFIG_MPC86XADS)
26
27#define BOARD_CHIP_NAME "MPC86X"
28
29/* U-Boot maps BCSR to 0xff080000 */
30#define BCSR_ADDR ((uint)0xff080000)
31
32/* MPC86XADS has one more CPLD and an additional BCSR.
33 */
34#define CFG_PHYDEV_ADDR ((uint)0xff0a0000)
35#define BCSR5 ((uint)(CFG_PHYDEV_ADDR + 0x300))
36
37#define BCSR5_T1_RST 0x10
38#define BCSR5_ATM155_RST 0x08
39#define BCSR5_ATM25_RST 0x04
40#define BCSR5_MII1_EN 0x02
41#define BCSR5_MII1_RST 0x01
42
43/* There is no PHY link change interrupt */
44#define PHY_INTERRUPT (-1)
45
46#else /* FADS */
47
48/* Memory map is configured by the PROM startup. 25/* Memory map is configured by the PROM startup.
49 * I tried to follow the FADS manual, although the startup PROM 26 * I tried to follow the FADS manual, although the startup PROM
50 * dictates this and we simply have to move some of the physical 27 * dictates this and we simply have to move some of the physical
@@ -55,8 +32,6 @@
55/* PHY link change interrupt */ 32/* PHY link change interrupt */
56#define PHY_INTERRUPT SIU_IRQ2 33#define PHY_INTERRUPT SIU_IRQ2
57 34
58#endif /* CONFIG_MPC86XADS */
59
60#define BCSR_SIZE ((uint)(64 * 1024)) 35#define BCSR_SIZE ((uint)(64 * 1024))
61#define BCSR0 ((uint)(BCSR_ADDR + 0x00)) 36#define BCSR0 ((uint)(BCSR_ADDR + 0x00))
62#define BCSR1 ((uint)(BCSR_ADDR + 0x04)) 37#define BCSR1 ((uint)(BCSR_ADDR + 0x04))
diff --git a/arch/ppc/platforms/mpc8272ads_setup.c b/arch/ppc/platforms/mpc8272ads_setup.c
deleted file mode 100644
index 47f4b38edb5f..000000000000
--- a/arch/ppc/platforms/mpc8272ads_setup.c
+++ /dev/null
@@ -1,367 +0,0 @@
1/*
2 * arch/ppc/platforms/mpc8272ads_setup.c
3 *
4 * MPC82xx Board-specific PlatformDevice descriptions
5 *
6 * 2005 (c) MontaVista Software, Inc.
7 * Vitaly Bordug <vbordug@ru.mvista.com>
8 *
9 * This file is licensed under the terms of the GNU General Public License
10 * version 2. This program is licensed "as is" without any warranty of any
11 * kind, whether express or implied.
12 */
13
14
15#include <linux/init.h>
16#include <linux/module.h>
17#include <linux/device.h>
18#include <linux/ioport.h>
19#include <linux/fs_enet_pd.h>
20#include <linux/platform_device.h>
21#include <linux/phy.h>
22
23#include <asm/io.h>
24#include <asm/mpc8260.h>
25#include <asm/cpm2.h>
26#include <asm/immap_cpm2.h>
27#include <asm/irq.h>
28#include <asm/ppc_sys.h>
29#include <asm/ppcboot.h>
30#include <linux/fs_uart_pd.h>
31
32#include "pq2ads_pd.h"
33
34static void init_fcc1_ioports(struct fs_platform_info*);
35static void init_fcc2_ioports(struct fs_platform_info*);
36static void init_scc1_uart_ioports(struct fs_uart_platform_info*);
37static void init_scc4_uart_ioports(struct fs_uart_platform_info*);
38
39static struct fs_uart_platform_info mpc8272_uart_pdata[] = {
40 [fsid_scc1_uart] = {
41 .init_ioports = init_scc1_uart_ioports,
42 .fs_no = fsid_scc1_uart,
43 .brg = 1,
44 .tx_num_fifo = 4,
45 .tx_buf_size = 32,
46 .rx_num_fifo = 4,
47 .rx_buf_size = 32,
48 },
49 [fsid_scc4_uart] = {
50 .init_ioports = init_scc4_uart_ioports,
51 .fs_no = fsid_scc4_uart,
52 .brg = 4,
53 .tx_num_fifo = 4,
54 .tx_buf_size = 32,
55 .rx_num_fifo = 4,
56 .rx_buf_size = 32,
57 },
58};
59
60static struct fs_mii_bb_platform_info m82xx_mii_bb_pdata = {
61 .mdio_dat.bit = 18,
62 .mdio_dir.bit = 18,
63 .mdc_dat.bit = 19,
64 .delay = 1,
65};
66
67static struct fs_platform_info mpc82xx_enet_pdata[] = {
68 [fsid_fcc1] = {
69 .fs_no = fsid_fcc1,
70 .cp_page = CPM_CR_FCC1_PAGE,
71 .cp_block = CPM_CR_FCC1_SBLOCK,
72
73 .clk_trx = (PC_F1RXCLK | PC_F1TXCLK),
74 .clk_route = CMX1_CLK_ROUTE,
75 .clk_mask = CMX1_CLK_MASK,
76 .init_ioports = init_fcc1_ioports,
77
78 .mem_offset = FCC1_MEM_OFFSET,
79
80 .rx_ring = 32,
81 .tx_ring = 32,
82 .rx_copybreak = 240,
83 .use_napi = 0,
84 .napi_weight = 17,
85 .bus_id = "0:00",
86 },
87 [fsid_fcc2] = {
88 .fs_no = fsid_fcc2,
89 .cp_page = CPM_CR_FCC2_PAGE,
90 .cp_block = CPM_CR_FCC2_SBLOCK,
91 .clk_trx = (PC_F2RXCLK | PC_F2TXCLK),
92 .clk_route = CMX2_CLK_ROUTE,
93 .clk_mask = CMX2_CLK_MASK,
94 .init_ioports = init_fcc2_ioports,
95
96 .mem_offset = FCC2_MEM_OFFSET,
97
98 .rx_ring = 32,
99 .tx_ring = 32,
100 .rx_copybreak = 240,
101 .use_napi = 0,
102 .napi_weight = 17,
103 .bus_id = "0:03",
104 },
105};
106
107static void init_fcc1_ioports(struct fs_platform_info* pdata)
108{
109 struct io_port *io;
110 u32 tempval;
111 cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t));
112 u32 *bcsr = ioremap(BCSR_ADDR+4, sizeof(u32));
113
114 io = &immap->im_ioport;
115
116 /* Enable the PHY */
117 clrbits32(bcsr, BCSR1_FETHIEN);
118 setbits32(bcsr, BCSR1_FETH_RST);
119
120 /* FCC1 pins are on port A/C. */
121 /* Configure port A and C pins for FCC1 Ethernet. */
122
123 tempval = in_be32(&io->iop_pdira);
124 tempval &= ~PA1_DIRA0;
125 tempval |= PA1_DIRA1;
126 out_be32(&io->iop_pdira, tempval);
127
128 tempval = in_be32(&io->iop_psora);
129 tempval &= ~PA1_PSORA0;
130 tempval |= PA1_PSORA1;
131 out_be32(&io->iop_psora, tempval);
132
133 setbits32(&io->iop_ppara,PA1_DIRA0 | PA1_DIRA1);
134
135 /* Alter clocks */
136 tempval = PC_F1TXCLK|PC_F1RXCLK;
137
138 clrbits32(&io->iop_psorc, tempval);
139 clrbits32(&io->iop_pdirc, tempval);
140 setbits32(&io->iop_pparc, tempval);
141
142 clrbits32(&immap->im_cpmux.cmx_fcr, CMX1_CLK_MASK);
143 setbits32(&immap->im_cpmux.cmx_fcr, CMX1_CLK_ROUTE);
144 iounmap(bcsr);
145 iounmap(immap);
146}
147
148static void init_fcc2_ioports(struct fs_platform_info* pdata)
149{
150 cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t));
151 u32 *bcsr = ioremap(BCSR_ADDR+12, sizeof(u32));
152
153 struct io_port *io;
154 u32 tempval;
155
156 immap = cpm2_immr;
157
158 io = &immap->im_ioport;
159
160 /* Enable the PHY */
161 clrbits32(bcsr, BCSR3_FETHIEN2);
162 setbits32(bcsr, BCSR3_FETH2_RST);
163
164 /* FCC2 are port B/C. */
165 /* Configure port A and C pins for FCC2 Ethernet. */
166
167 tempval = in_be32(&io->iop_pdirb);
168 tempval &= ~PB2_DIRB0;
169 tempval |= PB2_DIRB1;
170 out_be32(&io->iop_pdirb, tempval);
171
172 tempval = in_be32(&io->iop_psorb);
173 tempval &= ~PB2_PSORB0;
174 tempval |= PB2_PSORB1;
175 out_be32(&io->iop_psorb, tempval);
176
177 setbits32(&io->iop_pparb,PB2_DIRB0 | PB2_DIRB1);
178
179 tempval = PC_F2RXCLK|PC_F2TXCLK;
180
181 /* Alter clocks */
182 clrbits32(&io->iop_psorc,tempval);
183 clrbits32(&io->iop_pdirc,tempval);
184 setbits32(&io->iop_pparc,tempval);
185
186 clrbits32(&immap->im_cpmux.cmx_fcr, CMX2_CLK_MASK);
187 setbits32(&immap->im_cpmux.cmx_fcr, CMX2_CLK_ROUTE);
188
189 iounmap(bcsr);
190 iounmap(immap);
191}
192
193
194static void __init mpc8272ads_fixup_enet_pdata(struct platform_device *pdev,
195 int idx)
196{
197 bd_t* bi = (void*)__res;
198 int fs_no = fsid_fcc1+pdev->id-1;
199
200 if(fs_no >= ARRAY_SIZE(mpc82xx_enet_pdata)) {
201 return;
202 }
203
204 mpc82xx_enet_pdata[fs_no].dpram_offset=
205 (u32)cpm2_immr->im_dprambase;
206 mpc82xx_enet_pdata[fs_no].fcc_regs_c =
207 (u32)cpm2_immr->im_fcc_c;
208 memcpy(&mpc82xx_enet_pdata[fs_no].macaddr,bi->bi_enetaddr,6);
209
210 /* prevent dup mac */
211 if(fs_no == fsid_fcc2)
212 mpc82xx_enet_pdata[fs_no].macaddr[5] ^= 1;
213
214 pdev->dev.platform_data = &mpc82xx_enet_pdata[fs_no];
215}
216
217static void mpc8272ads_fixup_uart_pdata(struct platform_device *pdev,
218 int idx)
219{
220 bd_t *bd = (bd_t *) __res;
221 struct fs_uart_platform_info *pinfo;
222 int num = ARRAY_SIZE(mpc8272_uart_pdata);
223 int id = fs_uart_id_scc2fsid(idx);
224
225 /* no need to alter anything if console */
226 if ((id < num) && (!pdev->dev.platform_data)) {
227 pinfo = &mpc8272_uart_pdata[id];
228 pinfo->uart_clk = bd->bi_intfreq;
229 pdev->dev.platform_data = pinfo;
230 }
231}
232
233static void init_scc1_uart_ioports(struct fs_uart_platform_info* pdata)
234{
235 cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t));
236
237 /* SCC1 is only on port D */
238 setbits32(&immap->im_ioport.iop_ppard,0x00000003);
239 clrbits32(&immap->im_ioport.iop_psord,0x00000001);
240 setbits32(&immap->im_ioport.iop_psord,0x00000002);
241 clrbits32(&immap->im_ioport.iop_pdird,0x00000001);
242 setbits32(&immap->im_ioport.iop_pdird,0x00000002);
243
244 /* Wire BRG1 to SCC1 */
245 clrbits32(&immap->im_cpmux.cmx_scr,0x00ffffff);
246
247 iounmap(immap);
248}
249
250static void init_scc4_uart_ioports(struct fs_uart_platform_info* pdata)
251{
252 cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t));
253
254 setbits32(&immap->im_ioport.iop_ppard,0x00000600);
255 clrbits32(&immap->im_ioport.iop_psord,0x00000600);
256 clrbits32(&immap->im_ioport.iop_pdird,0x00000200);
257 setbits32(&immap->im_ioport.iop_pdird,0x00000400);
258
259 /* Wire BRG4 to SCC4 */
260 clrbits32(&immap->im_cpmux.cmx_scr,0x000000ff);
261 setbits32(&immap->im_cpmux.cmx_scr,0x0000001b);
262
263 iounmap(immap);
264}
265
266static void __init mpc8272ads_fixup_mdio_pdata(struct platform_device *pdev,
267 int idx)
268{
269 m82xx_mii_bb_pdata.irq[0] = PHY_INTERRUPT;
270 m82xx_mii_bb_pdata.irq[1] = PHY_POLL;
271 m82xx_mii_bb_pdata.irq[2] = PHY_POLL;
272 m82xx_mii_bb_pdata.irq[3] = PHY_INTERRUPT;
273 m82xx_mii_bb_pdata.irq[31] = PHY_POLL;
274
275
276 m82xx_mii_bb_pdata.mdio_dat.offset =
277 (u32)&cpm2_immr->im_ioport.iop_pdatc;
278
279 m82xx_mii_bb_pdata.mdio_dir.offset =
280 (u32)&cpm2_immr->im_ioport.iop_pdirc;
281
282 m82xx_mii_bb_pdata.mdc_dat.offset =
283 (u32)&cpm2_immr->im_ioport.iop_pdatc;
284
285
286 pdev->dev.platform_data = &m82xx_mii_bb_pdata;
287}
288
289static int mpc8272ads_platform_notify(struct device *dev)
290{
291 static const struct platform_notify_dev_map dev_map[] = {
292 {
293 .bus_id = "fsl-cpm-fcc",
294 .rtn = mpc8272ads_fixup_enet_pdata,
295 },
296 {
297 .bus_id = "fsl-cpm-scc:uart",
298 .rtn = mpc8272ads_fixup_uart_pdata,
299 },
300 {
301 .bus_id = "fsl-bb-mdio",
302 .rtn = mpc8272ads_fixup_mdio_pdata,
303 },
304 {
305 .bus_id = NULL
306 }
307 };
308 platform_notify_map(dev_map,dev);
309
310 return 0;
311
312}
313
314int __init mpc8272ads_init(void)
315{
316 printk(KERN_NOTICE "mpc8272ads: Init\n");
317
318 platform_notify = mpc8272ads_platform_notify;
319
320 ppc_sys_device_initfunc();
321
322 ppc_sys_device_disable_all();
323 ppc_sys_device_enable(MPC82xx_CPM_FCC1);
324 ppc_sys_device_enable(MPC82xx_CPM_FCC2);
325
326 /* to be ready for console, let's attach pdata here */
327#ifdef CONFIG_SERIAL_CPM_SCC1
328 ppc_sys_device_setfunc(MPC82xx_CPM_SCC1, PPC_SYS_FUNC_UART);
329 ppc_sys_device_enable(MPC82xx_CPM_SCC1);
330
331#endif
332
333#ifdef CONFIG_SERIAL_CPM_SCC4
334 ppc_sys_device_setfunc(MPC82xx_CPM_SCC4, PPC_SYS_FUNC_UART);
335 ppc_sys_device_enable(MPC82xx_CPM_SCC4);
336#endif
337
338 ppc_sys_device_enable(MPC82xx_MDIO_BB);
339
340 return 0;
341}
342
343/*
344 To prevent confusion, console selection is gross:
345 by 0 assumed SCC1 and by 1 assumed SCC4
346 */
347struct platform_device* early_uart_get_pdev(int index)
348{
349 bd_t *bd = (bd_t *) __res;
350 struct fs_uart_platform_info *pinfo;
351
352 struct platform_device* pdev = NULL;
353 if(index) { /*assume SCC4 here*/
354 pdev = &ppc_sys_platform_devices[MPC82xx_CPM_SCC4];
355 pinfo = &mpc8272_uart_pdata[fsid_scc4_uart];
356 } else { /*over SCC1*/
357 pdev = &ppc_sys_platform_devices[MPC82xx_CPM_SCC1];
358 pinfo = &mpc8272_uart_pdata[fsid_scc1_uart];
359 }
360
361 pinfo->uart_clk = bd->bi_intfreq;
362 pdev->dev.platform_data = pinfo;
363 ppc_sys_fixup_mem_resource(pdev, CPM_MAP_ADDR);
364 return NULL;
365}
366
367arch_initcall(mpc8272ads_init);
diff --git a/arch/ppc/platforms/mpc885ads.h b/arch/ppc/platforms/mpc885ads.h
deleted file mode 100644
index d3bbbb3c9a1f..000000000000
--- a/arch/ppc/platforms/mpc885ads.h
+++ /dev/null
@@ -1,93 +0,0 @@
1/*
2 * A collection of structures, addresses, and values associated with
3 * the Freescale MPC885ADS board.
4 * Copied from the FADS stuff.
5 *
6 * Author: MontaVista Software, Inc.
7 * source@mvista.com
8 *
9 * 2005 (c) MontaVista Software, Inc. This file is licensed under the
10 * terms of the GNU General Public License version 2. This program is licensed
11 * "as is" without any warranty of any kind, whether express or implied.
12 */
13
14#ifdef __KERNEL__
15#ifndef __ASM_MPC885ADS_H__
16#define __ASM_MPC885ADS_H__
17
18
19#include <asm/ppcboot.h>
20
21/* U-Boot maps BCSR to 0xff080000 */
22#define BCSR_ADDR ((uint)0xff080000)
23#define BCSR_SIZE ((uint)32)
24#define BCSR0 ((uint)(BCSR_ADDR + 0x00))
25#define BCSR1 ((uint)(BCSR_ADDR + 0x04))
26#define BCSR2 ((uint)(BCSR_ADDR + 0x08))
27#define BCSR3 ((uint)(BCSR_ADDR + 0x0c))
28#define BCSR4 ((uint)(BCSR_ADDR + 0x10))
29
30#define CFG_PHYDEV_ADDR ((uint)0xff0a0000)
31#define BCSR5 ((uint)(CFG_PHYDEV_ADDR + 0x300))
32
33#define IMAP_ADDR ((uint)0xff000000)
34#define IMAP_SIZE ((uint)(64 * 1024))
35
36#define PCMCIA_MEM_ADDR ((uint)0xff020000)
37#define PCMCIA_MEM_SIZE ((uint)(64 * 1024))
38
39/* Bits of interest in the BCSRs.
40 */
41#define BCSR1_ETHEN ((uint)0x20000000)
42#define BCSR1_IRDAEN ((uint)0x10000000)
43#define BCSR1_RS232EN_1 ((uint)0x01000000)
44#define BCSR1_PCCEN ((uint)0x00800000)
45#define BCSR1_PCCVCC0 ((uint)0x00400000)
46#define BCSR1_PCCVPP0 ((uint)0x00200000)
47#define BCSR1_PCCVPP1 ((uint)0x00100000)
48#define BCSR1_PCCVPP_MASK (BCSR1_PCCVPP0 | BCSR1_PCCVPP1)
49#define BCSR1_RS232EN_2 ((uint)0x00040000)
50#define BCSR1_PCCVCC1 ((uint)0x00010000)
51#define BCSR1_PCCVCC_MASK (BCSR1_PCCVCC0 | BCSR1_PCCVCC1)
52
53#define BCSR4_ETH10_RST ((uint)0x80000000) /* 10Base-T PHY reset*/
54#define BCSR4_USB_LO_SPD ((uint)0x04000000)
55#define BCSR4_USB_VCC ((uint)0x02000000)
56#define BCSR4_USB_FULL_SPD ((uint)0x00040000)
57#define BCSR4_USB_EN ((uint)0x00020000)
58
59#define BCSR5_MII2_EN 0x40
60#define BCSR5_MII2_RST 0x20
61#define BCSR5_T1_RST 0x10
62#define BCSR5_ATM155_RST 0x08
63#define BCSR5_ATM25_RST 0x04
64#define BCSR5_MII1_EN 0x02
65#define BCSR5_MII1_RST 0x01
66
67/* Interrupt level assignments */
68#define PHY_INTERRUPT SIU_IRQ7 /* PHY link change interrupt */
69#define SIU_INT_FEC1 SIU_LEVEL1 /* FEC1 interrupt */
70#define SIU_INT_FEC2 SIU_LEVEL3 /* FEC2 interrupt */
71#define FEC_INTERRUPT SIU_INT_FEC1 /* FEC interrupt */
72
73/* We don't use the 8259 */
74#define NR_8259_INTS 0
75
76/* CPM Ethernet through SCC3 */
77#define PA_ENET_RXD ((ushort)0x0040)
78#define PA_ENET_TXD ((ushort)0x0080)
79#define PE_ENET_TCLK ((uint)0x00004000)
80#define PE_ENET_RCLK ((uint)0x00008000)
81#define PE_ENET_TENA ((uint)0x00000010)
82#define PC_ENET_CLSN ((ushort)0x0400)
83#define PC_ENET_RENA ((ushort)0x0800)
84
85/* Control bits in the SICR to route TCLK (CLK5) and RCLK (CLK6) to
86 * SCC3. Also, make sure GR3 (bit 8) and SC3 (bit 9) are zero */
87#define SICR_ENET_MASK ((uint)0x00ff0000)
88#define SICR_ENET_CLKRT ((uint)0x002c0000)
89
90#define BOARD_CHIP_NAME "MPC885"
91
92#endif /* __ASM_MPC885ADS_H__ */
93#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/mpc885ads_setup.c b/arch/ppc/platforms/mpc885ads_setup.c
deleted file mode 100644
index ba06cc08cdab..000000000000
--- a/arch/ppc/platforms/mpc885ads_setup.c
+++ /dev/null
@@ -1,476 +0,0 @@
1/*arch/ppc/platforms/mpc885ads_setup.c
2 *
3 * Platform setup for the Freescale mpc885ads board
4 *
5 * Vitaly Bordug <vbordug@ru.mvista.com>
6 *
7 * Copyright 2005 MontaVista Software Inc.
8 *
9 * This file is licensed under the terms of the GNU General Public License
10 * version 2. This program is licensed "as is" without any warranty of any
11 * kind, whether express or implied.
12 */
13
14#include <linux/init.h>
15#include <linux/module.h>
16#include <linux/param.h>
17#include <linux/string.h>
18#include <linux/ioport.h>
19#include <linux/device.h>
20
21#include <linux/fs_enet_pd.h>
22#include <linux/fs_uart_pd.h>
23#include <linux/mii.h>
24
25#include <asm/delay.h>
26#include <asm/io.h>
27#include <asm/machdep.h>
28#include <asm/page.h>
29#include <asm/processor.h>
30#include <asm/system.h>
31#include <asm/time.h>
32#include <asm/ppcboot.h>
33#include <asm/8xx_immap.h>
34#include <asm/cpm1.h>
35#include <asm/ppc_sys.h>
36
37extern unsigned char __res[];
38static void setup_smc1_ioports(struct fs_uart_platform_info*);
39static void setup_smc2_ioports(struct fs_uart_platform_info*);
40
41static struct fs_mii_fec_platform_info mpc8xx_mdio_fec_pdata;
42static void setup_fec1_ioports(struct fs_platform_info*);
43static void setup_fec2_ioports(struct fs_platform_info*);
44static void setup_scc3_ioports(struct fs_platform_info*);
45
46static struct fs_uart_platform_info mpc885_uart_pdata[] = {
47 [fsid_smc1_uart] = {
48 .brg = 1,
49 .fs_no = fsid_smc1_uart,
50 .init_ioports = setup_smc1_ioports,
51 .tx_num_fifo = 4,
52 .tx_buf_size = 32,
53 .rx_num_fifo = 4,
54 .rx_buf_size = 32,
55 },
56 [fsid_smc2_uart] = {
57 .brg = 2,
58 .fs_no = fsid_smc2_uart,
59 .init_ioports = setup_smc2_ioports,
60 .tx_num_fifo = 4,
61 .tx_buf_size = 32,
62 .rx_num_fifo = 4,
63 .rx_buf_size = 32,
64 },
65};
66
67static struct fs_platform_info mpc8xx_enet_pdata[] = {
68 [fsid_fec1] = {
69 .rx_ring = 128,
70 .tx_ring = 16,
71 .rx_copybreak = 240,
72
73 .use_napi = 1,
74 .napi_weight = 17,
75
76 .init_ioports = setup_fec1_ioports,
77
78 .bus_id = "0:00",
79 .has_phy = 1,
80 },
81 [fsid_fec2] = {
82 .rx_ring = 128,
83 .tx_ring = 16,
84 .rx_copybreak = 240,
85
86 .use_napi = 1,
87 .napi_weight = 17,
88
89 .init_ioports = setup_fec2_ioports,
90
91 .bus_id = "0:01",
92 .has_phy = 1,
93 },
94 [fsid_scc3] = {
95 .rx_ring = 64,
96 .tx_ring = 8,
97 .rx_copybreak = 240,
98
99 .use_napi = 1,
100 .napi_weight = 17,
101
102 .init_ioports = setup_scc3_ioports,
103#ifdef CONFIG_FIXED_MII_10_FDX
104 .bus_id = "fixed@100:1",
105#else
106 .bus_id = "0:02",
107 #endif
108 },
109};
110
111void __init board_init(void)
112{
113 cpm8xx_t *cp = cpmp;
114 unsigned int *bcsr_io;
115
116#ifdef CONFIG_FS_ENET
117 immap_t *immap = (immap_t *) IMAP_ADDR;
118#endif
119 bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
120
121 if (bcsr_io == NULL) {
122 printk(KERN_CRIT "Could not remap BCSR\n");
123 return;
124 }
125#ifdef CONFIG_SERIAL_CPM_SMC1
126 cp->cp_simode &= ~(0xe0000000 >> 17); /* brg1 */
127 clrbits32(bcsr_io, BCSR1_RS232EN_1);
128 cp->cp_smc[0].smc_smcm |= (SMCM_RX | SMCM_TX);
129 cp->cp_smc[0].smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
130#else
131 setbits32(bcsr_io,BCSR1_RS232EN_1);
132 cp->cp_smc[0].smc_smcmr = 0;
133 cp->cp_smc[0].smc_smce = 0;
134#endif
135
136#ifdef CONFIG_SERIAL_CPM_SMC2
137 cp->cp_simode &= ~(0xe0000000 >> 1);
138 cp->cp_simode |= (0x20000000 >> 1); /* brg2 */
139 clrbits32(bcsr_io,BCSR1_RS232EN_2);
140 cp->cp_smc[1].smc_smcm |= (SMCM_RX | SMCM_TX);
141 cp->cp_smc[1].smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
142#else
143 setbits32(bcsr_io,BCSR1_RS232EN_2);
144 cp->cp_smc[1].smc_smcmr = 0;
145 cp->cp_smc[1].smc_smce = 0;
146#endif
147 iounmap(bcsr_io);
148
149#ifdef CONFIG_FS_ENET
150 /* use MDC for MII (common) */
151 setbits16(&immap->im_ioport.iop_pdpar, 0x0080);
152 clrbits16(&immap->im_ioport.iop_pddir, 0x0080);
153 bcsr_io = ioremap(BCSR5, sizeof(unsigned long));
154 clrbits32(bcsr_io,BCSR5_MII1_EN);
155 clrbits32(bcsr_io,BCSR5_MII1_RST);
156#ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2
157 clrbits32(bcsr_io,BCSR5_MII2_EN);
158 clrbits32(bcsr_io,BCSR5_MII2_RST);
159#endif
160 iounmap(bcsr_io);
161#endif
162}
163
164static void setup_fec1_ioports(struct fs_platform_info* pdata)
165{
166 immap_t *immap = (immap_t *) IMAP_ADDR;
167
168 /* configure FEC1 pins */
169 setbits16(&immap->im_ioport.iop_papar, 0xf830);
170 setbits16(&immap->im_ioport.iop_padir, 0x0830);
171 clrbits16(&immap->im_ioport.iop_padir, 0xf000);
172 setbits32(&immap->im_cpm.cp_pbpar, 0x00001001);
173
174 clrbits32(&immap->im_cpm.cp_pbdir, 0x00001001);
175 setbits16(&immap->im_ioport.iop_pcpar, 0x000c);
176 clrbits16(&immap->im_ioport.iop_pcdir, 0x000c);
177 setbits32(&immap->im_cpm.cp_pepar, 0x00000003);
178
179 setbits32(&immap->im_cpm.cp_pedir, 0x00000003);
180 clrbits32(&immap->im_cpm.cp_peso, 0x00000003);
181 clrbits32(&immap->im_cpm.cp_cptr, 0x00000100);
182}
183
184static void setup_fec2_ioports(struct fs_platform_info* pdata)
185{
186 immap_t *immap = (immap_t *) IMAP_ADDR;
187
188 /* configure FEC2 pins */
189 setbits32(&immap->im_cpm.cp_pepar, 0x0003fffc);
190 setbits32(&immap->im_cpm.cp_pedir, 0x0003fffc);
191 clrbits32(&immap->im_cpm.cp_peso, 0x000087fc);
192 setbits32(&immap->im_cpm.cp_peso, 0x00037800);
193 clrbits32(&immap->im_cpm.cp_cptr, 0x00000080);
194}
195
196static void setup_scc3_ioports(struct fs_platform_info* pdata)
197{
198 immap_t *immap = (immap_t *) IMAP_ADDR;
199 unsigned *bcsr_io;
200
201 bcsr_io = ioremap(BCSR_ADDR, BCSR_SIZE);
202
203 if (bcsr_io == NULL) {
204 printk(KERN_CRIT "Could not remap BCSR\n");
205 return;
206 }
207
208 /* Enable the PHY.
209 */
210 clrbits32(bcsr_io+4, BCSR4_ETH10_RST);
211 udelay(1000);
212 setbits32(bcsr_io+4, BCSR4_ETH10_RST);
213 /* Configure port A pins for Txd and Rxd.
214 */
215 setbits16(&immap->im_ioport.iop_papar, PA_ENET_RXD | PA_ENET_TXD);
216 clrbits16(&immap->im_ioport.iop_padir, PA_ENET_RXD | PA_ENET_TXD);
217
218 /* Configure port C pins to enable CLSN and RENA.
219 */
220 clrbits16(&immap->im_ioport.iop_pcpar, PC_ENET_CLSN | PC_ENET_RENA);
221 clrbits16(&immap->im_ioport.iop_pcdir, PC_ENET_CLSN | PC_ENET_RENA);
222 setbits16(&immap->im_ioport.iop_pcso, PC_ENET_CLSN | PC_ENET_RENA);
223
224 /* Configure port E for TCLK and RCLK.
225 */
226 setbits32(&immap->im_cpm.cp_pepar, PE_ENET_TCLK | PE_ENET_RCLK);
227 clrbits32(&immap->im_cpm.cp_pepar, PE_ENET_TENA);
228 clrbits32(&immap->im_cpm.cp_pedir,
229 PE_ENET_TCLK | PE_ENET_RCLK | PE_ENET_TENA);
230 clrbits32(&immap->im_cpm.cp_peso, PE_ENET_TCLK | PE_ENET_RCLK);
231 setbits32(&immap->im_cpm.cp_peso, PE_ENET_TENA);
232
233 /* Configure Serial Interface clock routing.
234 * First, clear all SCC bits to zero, then set the ones we want.
235 */
236 clrbits32(&immap->im_cpm.cp_sicr, SICR_ENET_MASK);
237 setbits32(&immap->im_cpm.cp_sicr, SICR_ENET_CLKRT);
238
239 /* Disable Rx and Tx. SMC1 sshould be stopped if SCC3 eternet are used.
240 */
241 immap->im_cpm.cp_smc[0].smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
242 /* On the MPC885ADS SCC ethernet PHY is initialized in the full duplex mode
243 * by H/W setting after reset. SCC ethernet controller support only half duplex.
244 * This discrepancy of modes causes a lot of carrier lost errors.
245 */
246
247 /* In the original SCC enet driver the following code is placed at
248 the end of the initialization */
249 setbits32(&immap->im_cpm.cp_pepar, PE_ENET_TENA);
250 clrbits32(&immap->im_cpm.cp_pedir, PE_ENET_TENA);
251 setbits32(&immap->im_cpm.cp_peso, PE_ENET_TENA);
252
253 setbits32(bcsr_io+4, BCSR1_ETHEN);
254 iounmap(bcsr_io);
255}
256
257static int mac_count = 0;
258
259static void mpc885ads_fixup_enet_pdata(struct platform_device *pdev, int fs_no)
260{
261 struct fs_platform_info *fpi;
262 bd_t *bd = (bd_t *) __res;
263 char *e;
264 int i;
265
266 if(fs_no >= ARRAY_SIZE(mpc8xx_enet_pdata)) {
267 printk(KERN_ERR"No network-suitable #%d device on bus", fs_no);
268 return;
269 }
270
271 fpi = &mpc8xx_enet_pdata[fs_no];
272
273 switch (fs_no) {
274 case fsid_fec1:
275 fpi->init_ioports = &setup_fec1_ioports;
276 break;
277 case fsid_fec2:
278 fpi->init_ioports = &setup_fec2_ioports;
279 break;
280 case fsid_scc3:
281 fpi->init_ioports = &setup_scc3_ioports;
282 break;
283 default:
284 printk(KERN_WARNING "Device %s is not supported!\n", pdev->name);
285 return;
286 }
287
288 pdev->dev.platform_data = fpi;
289 fpi->fs_no = fs_no;
290
291 e = (unsigned char *)&bd->bi_enetaddr;
292 for (i = 0; i < 6; i++)
293 fpi->macaddr[i] = *e++;
294
295 fpi->macaddr[5] += mac_count++;
296
297}
298
299static void mpc885ads_fixup_fec_enet_pdata(struct platform_device *pdev,
300 int idx)
301{
302 /* This is for FEC devices only */
303 if (!pdev || !pdev->name || (!strstr(pdev->name, "fsl-cpm-fec")))
304 return;
305 mpc885ads_fixup_enet_pdata(pdev, fsid_fec1 + pdev->id - 1);
306}
307
308static void __init mpc885ads_fixup_scc_enet_pdata(struct platform_device *pdev,
309 int idx)
310{
311 /* This is for SCC devices only */
312 if (!pdev || !pdev->name || (!strstr(pdev->name, "fsl-cpm-scc")))
313 return;
314
315 mpc885ads_fixup_enet_pdata(pdev, fsid_scc1 + pdev->id - 1);
316}
317
318static void setup_smc1_ioports(struct fs_uart_platform_info* pdata)
319{
320 immap_t *immap = (immap_t *) IMAP_ADDR;
321 unsigned *bcsr_io;
322 unsigned int iobits = 0x000000c0;
323
324 bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
325
326 if (bcsr_io == NULL) {
327 printk(KERN_CRIT "Could not remap BCSR1\n");
328 return;
329 }
330 clrbits32(bcsr_io,BCSR1_RS232EN_1);
331 iounmap(bcsr_io);
332
333 setbits32(&immap->im_cpm.cp_pbpar, iobits);
334 clrbits32(&immap->im_cpm.cp_pbdir, iobits);
335 clrbits16(&immap->im_cpm.cp_pbodr, iobits);
336}
337
338static void setup_smc2_ioports(struct fs_uart_platform_info* pdata)
339{
340 immap_t *immap = (immap_t *) IMAP_ADDR;
341 unsigned *bcsr_io;
342 unsigned int iobits = 0x00000c00;
343
344 bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
345
346 if (bcsr_io == NULL) {
347 printk(KERN_CRIT "Could not remap BCSR1\n");
348 return;
349 }
350 clrbits32(bcsr_io,BCSR1_RS232EN_2);
351 iounmap(bcsr_io);
352
353#ifndef CONFIG_SERIAL_CPM_ALT_SMC2
354 setbits32(&immap->im_cpm.cp_pbpar, iobits);
355 clrbits32(&immap->im_cpm.cp_pbdir, iobits);
356 clrbits16(&immap->im_cpm.cp_pbodr, iobits);
357#else
358 setbits16(&immap->im_ioport.iop_papar, iobits);
359 clrbits16(&immap->im_ioport.iop_padir, iobits);
360 clrbits16(&immap->im_ioport.iop_paodr, iobits);
361#endif
362}
363
364static void __init mpc885ads_fixup_uart_pdata(struct platform_device *pdev,
365 int idx)
366{
367 bd_t *bd = (bd_t *) __res;
368 struct fs_uart_platform_info *pinfo;
369 int num = ARRAY_SIZE(mpc885_uart_pdata);
370
371 int id = fs_uart_id_smc2fsid(idx);
372
373 /* no need to alter anything if console */
374 if ((id < num) && (!pdev->dev.platform_data)) {
375 pinfo = &mpc885_uart_pdata[id];
376 pinfo->uart_clk = bd->bi_intfreq;
377 pdev->dev.platform_data = pinfo;
378 }
379}
380
381
382static int mpc885ads_platform_notify(struct device *dev)
383{
384
385 static const struct platform_notify_dev_map dev_map[] = {
386 {
387 .bus_id = "fsl-cpm-fec",
388 .rtn = mpc885ads_fixup_fec_enet_pdata,
389 },
390 {
391 .bus_id = "fsl-cpm-scc",
392 .rtn = mpc885ads_fixup_scc_enet_pdata,
393 },
394 {
395 .bus_id = "fsl-cpm-smc:uart",
396 .rtn = mpc885ads_fixup_uart_pdata
397 },
398 {
399 .bus_id = NULL
400 }
401 };
402
403 platform_notify_map(dev_map,dev);
404
405 return 0;
406}
407
408int __init mpc885ads_init(void)
409{
410 struct fs_mii_fec_platform_info* fmpi;
411 bd_t *bd = (bd_t *) __res;
412
413 printk(KERN_NOTICE "mpc885ads: Init\n");
414
415 platform_notify = mpc885ads_platform_notify;
416
417 ppc_sys_device_initfunc();
418 ppc_sys_device_disable_all();
419
420 ppc_sys_device_enable(MPC8xx_CPM_FEC1);
421
422 ppc_sys_device_enable(MPC8xx_MDIO_FEC);
423 fmpi = ppc_sys_platform_devices[MPC8xx_MDIO_FEC].dev.platform_data =
424 &mpc8xx_mdio_fec_pdata;
425
426 fmpi->mii_speed = ((((bd->bi_intfreq + 4999999) / 2500000) / 2) & 0x3F) << 1;
427
428 /* No PHY interrupt line here */
429 fmpi->irq[0xf] = SIU_IRQ7;
430
431#ifdef CONFIG_MPC8xx_SECOND_ETH_SCC3
432 ppc_sys_device_enable(MPC8xx_CPM_SCC3);
433
434#endif
435#ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2
436 ppc_sys_device_enable(MPC8xx_CPM_FEC2);
437#endif
438
439#ifdef CONFIG_SERIAL_CPM_SMC1
440 ppc_sys_device_enable(MPC8xx_CPM_SMC1);
441 ppc_sys_device_setfunc(MPC8xx_CPM_SMC1, PPC_SYS_FUNC_UART);
442#endif
443
444#ifdef CONFIG_SERIAL_CPM_SMC2
445 ppc_sys_device_enable(MPC8xx_CPM_SMC2);
446 ppc_sys_device_setfunc(MPC8xx_CPM_SMC2, PPC_SYS_FUNC_UART);
447#endif
448 return 0;
449}
450
451arch_initcall(mpc885ads_init);
452
453/*
454 To prevent confusion, console selection is gross:
455 by 0 assumed SMC1 and by 1 assumed SMC2
456 */
457struct platform_device* early_uart_get_pdev(int index)
458{
459 bd_t *bd = (bd_t *) __res;
460 struct fs_uart_platform_info *pinfo;
461
462 struct platform_device* pdev = NULL;
463 if(index) { /*assume SMC2 here*/
464 pdev = &ppc_sys_platform_devices[MPC8xx_CPM_SMC2];
465 pinfo = &mpc885_uart_pdata[1];
466 } else { /*over SMC1*/
467 pdev = &ppc_sys_platform_devices[MPC8xx_CPM_SMC1];
468 pinfo = &mpc885_uart_pdata[0];
469 }
470
471 pinfo->uart_clk = bd->bi_intfreq;
472 pdev->dev.platform_data = pinfo;
473 ppc_sys_fixup_mem_resource(pdev, IMAP_ADDR);
474 return NULL;
475}
476
diff --git a/arch/ppc/platforms/pq2ads.c b/arch/ppc/platforms/pq2ads.c
deleted file mode 100644
index 7fc2e02f5246..000000000000
--- a/arch/ppc/platforms/pq2ads.c
+++ /dev/null
@@ -1,53 +0,0 @@
1/*
2 * PQ2ADS platform support
3 *
4 * Author: Kumar Gala <galak@kernel.crashing.org>
5 * Derived from: est8260_setup.c by Allen Curtis
6 *
7 * Copyright 2004 Freescale Semiconductor, Inc.
8 *
9 * This program is free software; you can redistribute it and/or modify it
10 * under the terms of the GNU General Public License as published by the
11 * Free Software Foundation; either version 2 of the License, or (at your
12 * option) any later version.
13 */
14
15#include <linux/init.h>
16
17#include <asm/io.h>
18#include <asm/mpc8260.h>
19#include <asm/cpm2.h>
20#include <asm/immap_cpm2.h>
21
22void __init
23m82xx_board_setup(void)
24{
25 cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t));
26 u32 *bcsr = ioremap(BCSR_ADDR+4, sizeof(u32));
27
28 /* Enable the 2nd UART port */
29 clrbits32(bcsr, BCSR1_RS232_EN2);
30
31#ifdef CONFIG_SERIAL_CPM_SCC1
32 clrbits32((u32*)&immap->im_scc[0].scc_sccm, UART_SCCM_TX | UART_SCCM_RX);
33 clrbits32((u32*)&immap->im_scc[0].scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);
34#endif
35
36#ifdef CONFIG_SERIAL_CPM_SCC2
37 clrbits32((u32*)&immap->im_scc[1].scc_sccm, UART_SCCM_TX | UART_SCCM_RX);
38 clrbits32((u32*)&immap->im_scc[1].scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);
39#endif
40
41#ifdef CONFIG_SERIAL_CPM_SCC3
42 clrbits32((u32*)&immap->im_scc[2].scc_sccm, UART_SCCM_TX | UART_SCCM_RX);
43 clrbits32((u32*)&immap->im_scc[2].scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);
44#endif
45
46#ifdef CONFIG_SERIAL_CPM_SCC4
47 clrbits32((u32*)&immap->im_scc[3].scc_sccm, UART_SCCM_TX | UART_SCCM_RX);
48 clrbits32((u32*)&immap->im_scc[3].scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);
49#endif
50
51 iounmap(bcsr);
52 iounmap(immap);
53}
diff --git a/arch/ppc/platforms/pq2ads.h b/arch/ppc/platforms/pq2ads.h
deleted file mode 100644
index 2b287f4e0ca3..000000000000
--- a/arch/ppc/platforms/pq2ads.h
+++ /dev/null
@@ -1,94 +0,0 @@
1/*
2 * A collection of structures, addresses, and values associated with
3 * the Motorola MPC8260ADS/MPC8266ADS-PCI boards.
4 * Copied from the RPX-Classic and SBS8260 stuff.
5 *
6 * Copyright (c) 2001 Dan Malek (dan@mvista.com)
7 */
8#ifdef __KERNEL__
9#ifndef __MACH_ADS8260_DEFS
10#define __MACH_ADS8260_DEFS
11
12
13#include <asm/ppcboot.h>
14
15#if defined(CONFIG_ADS8272)
16#define BOARD_CHIP_NAME "8272"
17#endif
18
19/* Memory map is configured by the PROM startup.
20 * We just map a few things we need. The CSR is actually 4 byte-wide
21 * registers that can be accessed as 8-, 16-, or 32-bit values.
22 */
23#define CPM_MAP_ADDR ((uint)0xf0000000)
24#define BCSR_ADDR ((uint)0xf4500000)
25#define BCSR_SIZE ((uint)(32 * 1024))
26
27#define BOOTROM_RESTART_ADDR ((uint)0xff000104)
28
29/* For our show_cpuinfo hooks. */
30#define CPUINFO_VENDOR "Motorola"
31#define CPUINFO_MACHINE "PQ2 ADS PowerPC"
32
33/* The ADS8260 has 16, 32-bit wide control/status registers, accessed
34 * only on word boundaries.
35 * Not all are used (yet), or are interesting to us (yet).
36 */
37
38/* Things of interest in the CSR.
39*/
40#define BCSR0_LED0 ((uint)0x02000000) /* 0 == on */
41#define BCSR0_LED1 ((uint)0x01000000) /* 0 == on */
42#define BCSR1_FETHIEN ((uint)0x08000000) /* 0 == enable */
43#define BCSR1_FETH_RST ((uint)0x04000000) /* 0 == reset */
44#define BCSR1_RS232_EN1 ((uint)0x02000000) /* 0 == enable */
45#define BCSR1_RS232_EN2 ((uint)0x01000000) /* 0 == enable */
46#define BCSR3_FETHIEN2 ((uint)0x10000000) /* 0 == enable */
47#define BCSR3_FETH2_RST ((uint)0x80000000) /* 0 == reset */
48
49#define PHY_INTERRUPT SIU_INT_IRQ7
50
51#ifdef CONFIG_PCI
52/* PCI interrupt controller */
53#define PCI_INT_STAT_REG 0xF8200000
54#define PCI_INT_MASK_REG 0xF8200004
55#define PIRQA (NR_CPM_INTS + 0)
56#define PIRQB (NR_CPM_INTS + 1)
57#define PIRQC (NR_CPM_INTS + 2)
58#define PIRQD (NR_CPM_INTS + 3)
59
60/*
61 * PCI memory map definitions for MPC8266ADS-PCI.
62 *
63 * processor view
64 * local address PCI address target
65 * 0x80000000-0x9FFFFFFF 0x80000000-0x9FFFFFFF PCI mem with prefetch
66 * 0xA0000000-0xBFFFFFFF 0xA0000000-0xBFFFFFFF PCI mem w/o prefetch
67 * 0xF4000000-0xF7FFFFFF 0x00000000-0x03FFFFFF PCI IO
68 *
69 * PCI master view
70 * local address PCI address target
71 * 0x00000000-0x1FFFFFFF 0x00000000-0x1FFFFFFF MPC8266 local memory
72 */
73
74/* All the other PCI memory map definitions reside at syslib/m82xx_pci.h
75 Here we should redefine what is unique for this board */
76#define M82xx_PCI_SLAVE_MEM_LOCAL 0x00000000 /* Local base */
77#define M82xx_PCI_SLAVE_MEM_BUS 0x00000000 /* PCI base */
78#define M82xx_PCI_SLAVE_MEM_SIZE 0x10000000 /* 256 Mb */
79
80#define M82xx_PCI_SLAVE_SEC_WND_SIZE ~(0x40000000 - 1U) /* 2 x 512Mb */
81#define M82xx_PCI_SLAVE_SEC_WND_BASE 0x80000000 /* PCI Memory base */
82
83#if defined(CONFIG_ADS8272)
84#define PCI_INT_TO_SIU SIU_INT_IRQ2
85#elif defined(CONFIG_PQ2FADS)
86#define PCI_INT_TO_SIU SIU_INT_IRQ6
87#else
88#warning PCI Bridge will be without interrupts support
89#endif
90
91#endif /* CONFIG_PCI */
92
93#endif /* __MACH_ADS8260_DEFS */
94#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/pq2ads_pd.h b/arch/ppc/platforms/pq2ads_pd.h
deleted file mode 100644
index 672483df8079..000000000000
--- a/arch/ppc/platforms/pq2ads_pd.h
+++ /dev/null
@@ -1,32 +0,0 @@
1#ifndef __PQ2ADS_PD_H
2#define __PQ2ADS_PD_H
3/*
4 * arch/ppc/platforms/82xx/pq2ads_pd.h
5 *
6 * Some defines for MPC82xx board-specific PlatformDevice descriptions
7 *
8 * 2005 (c) MontaVista Software, Inc.
9 * Vitaly Bordug <vbordug@ru.mvista.com>
10 *
11 * This file is licensed under the terms of the GNU General Public License
12 * version 2. This program is licensed "as is" without any warranty of any
13 * kind, whether express or implied.
14 */
15
16/* FCC1 Clock Source Configuration. These can be redefined in the board specific file.
17 Can only choose from CLK9-12 */
18
19#define F1_RXCLK 11
20#define F1_TXCLK 10
21
22/* FCC2 Clock Source Configuration. These can be redefined in the board specific file.
23 Can only choose from CLK13-16 */
24#define F2_RXCLK 15
25#define F2_TXCLK 16
26
27/* FCC3 Clock Source Configuration. These can be redefined in the board specific file.
28 Can only choose from CLK13-16 */
29#define F3_RXCLK 13
30#define F3_TXCLK 14
31
32#endif
diff --git a/arch/ppc/syslib/m8260_setup.c b/arch/ppc/syslib/m8260_setup.c
index 46588fa94381..b40583724de3 100644
--- a/arch/ppc/syslib/m8260_setup.c
+++ b/arch/ppc/syslib/m8260_setup.c
@@ -175,12 +175,6 @@ m8260_init_IRQ(void)
175 * in case the boot rom changed something on us. 175 * in case the boot rom changed something on us.
176 */ 176 */
177 cpm2_immr->im_intctl.ic_siprr = 0x05309770; 177 cpm2_immr->im_intctl.ic_siprr = 0x05309770;
178
179#if defined(CONFIG_PCI) && (defined(CONFIG_ADS8272) || defined(CONFIG_PQ2FADS))
180 /* Initialize stuff for the 82xx CPLD IC and install demux */
181 pq2pci_init_irq();
182#endif
183
184} 178}
185 179
186/* 180/*
diff --git a/arch/ppc/syslib/m82xx_pci.c b/arch/ppc/syslib/m82xx_pci.c
index fe860d52e2e4..657a1c25a2ab 100644
--- a/arch/ppc/syslib/m82xx_pci.c
+++ b/arch/ppc/syslib/m82xx_pci.c
@@ -150,14 +150,6 @@ pq2pci_init_irq(void)
150{ 150{
151 int irq; 151 int irq;
152 volatile cpm2_map_t *immap = cpm2_immr; 152 volatile cpm2_map_t *immap = cpm2_immr;
153#if defined CONFIG_ADS8272
154 /* configure chip select for PCI interrupt controller */
155 immap->im_memctl.memc_br3 = PCI_INT_STAT_REG | 0x00001801;
156 immap->im_memctl.memc_or3 = 0xffff8010;
157#elif defined CONFIG_PQ2FADS
158 immap->im_memctl.memc_br8 = PCI_INT_STAT_REG | 0x00001801;
159 immap->im_memctl.memc_or8 = 0xffff8010;
160#endif
161 for (irq = NR_CPM_INTS; irq < NR_CPM_INTS + 4; irq++) 153 for (irq = NR_CPM_INTS; irq < NR_CPM_INTS + 4; irq++)
162 irq_desc[irq].chip = &pq2pci_ic; 154 irq_desc[irq].chip = &pq2pci_ic;
163 155
@@ -222,26 +214,6 @@ pq2ads_setup_pci(struct pci_controller *hose)
222 immap->im_memctl.memc_pcibr1 = M82xx_PCI_SEC_WND_BASE | PCIBR_ENABLE; 214 immap->im_memctl.memc_pcibr1 = M82xx_PCI_SEC_WND_BASE | PCIBR_ENABLE;
223#endif 215#endif
224 216
225#if defined CONFIG_ADS8272
226 immap->im_siu_conf.siu_82xx.sc_siumcr =
227 (immap->im_siu_conf.siu_82xx.sc_siumcr &
228 ~(SIUMCR_BBD | SIUMCR_ESE | SIUMCR_PBSE |
229 SIUMCR_CDIS | SIUMCR_DPPC11 | SIUMCR_L2CPC11 |
230 SIUMCR_LBPC11 | SIUMCR_APPC11 |
231 SIUMCR_CS10PC11 | SIUMCR_BCTLC11 | SIUMCR_MMR11)) |
232 SIUMCR_DPPC11 | SIUMCR_L2CPC01 | SIUMCR_LBPC00 |
233 SIUMCR_APPC10 | SIUMCR_CS10PC00 |
234 SIUMCR_BCTLC00 | SIUMCR_MMR11 ;
235
236#elif defined CONFIG_PQ2FADS
237 /*
238 * Setting required to enable IRQ1-IRQ7 (SIUMCR [DPPC]),
239 * and local bus for PCI (SIUMCR [LBPC]).
240 */
241 immap->im_siu_conf.siu_82xx.sc_siumcr = (immap->im_siu_conf.siu_82xx.sc_siumcr &
242 ~(SIUMCR_L2CPC11 | SIUMCR_LBPC11 | SIUMCR_CS10PC11 | SIUMCR_APPC11) |
243 SIUMCR_BBD | SIUMCR_LBPC01 | SIUMCR_DPPC11 | SIUMCR_APPC10);
244#endif
245 /* Enable PCI */ 217 /* Enable PCI */
246 immap->im_pci.pci_gcr = cpu_to_le32(PCIGCR_PCI_BUS_EN); 218 immap->im_pci.pci_gcr = cpu_to_le32(PCIGCR_PCI_BUS_EN);
247 219
@@ -284,12 +256,6 @@ pq2ads_setup_pci(struct pci_controller *hose)
284 immap->im_pci.pci_pibar0 = cpu_to_le32(M82xx_PCI_SLAVE_MEM_BUS >> PITA_ADDR_SHIFT); 256 immap->im_pci.pci_pibar0 = cpu_to_le32(M82xx_PCI_SLAVE_MEM_BUS >> PITA_ADDR_SHIFT);
285 immap->im_pci.pci_pitar0 = cpu_to_le32(M82xx_PCI_SLAVE_MEM_LOCAL>> PITA_ADDR_SHIFT); 257 immap->im_pci.pci_pitar0 = cpu_to_le32(M82xx_PCI_SLAVE_MEM_LOCAL>> PITA_ADDR_SHIFT);
286 258
287#if defined CONFIG_ADS8272
288 /* PCI int highest prio */
289 immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x01236745;
290#elif defined CONFIG_PQ2FADS
291 immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x03124567;
292#endif
293 /* park bus on PCI */ 259 /* park bus on PCI */
294 immap->im_siu_conf.siu_82xx.sc_ppc_acr = PPC_ACR_BUS_PARK_PCI; 260 immap->im_siu_conf.siu_82xx.sc_ppc_acr = PPC_ACR_BUS_PARK_PCI;
295 261
@@ -320,10 +286,6 @@ void __init pq2_find_bridges(void)
320 hose->bus_offset = 0; 286 hose->bus_offset = 0;
321 hose->last_busno = 0xff; 287 hose->last_busno = 0xff;
322 288
323#ifdef CONFIG_ADS8272
324 hose->set_cfg_type = 1;
325#endif
326
327 setup_m8260_indirect_pci(hose, 289 setup_m8260_indirect_pci(hose,
328 (unsigned long)&cpm2_immr->im_pci.pci_cfg_addr, 290 (unsigned long)&cpm2_immr->im_pci.pci_cfg_addr,
329 (unsigned long)&cpm2_immr->im_pci.pci_cfg_data); 291 (unsigned long)&cpm2_immr->im_pci.pci_cfg_data);
diff --git a/arch/ppc/syslib/m8xx_setup.c b/arch/ppc/syslib/m8xx_setup.c
index 19749e9bcf91..18da720fc1b0 100644
--- a/arch/ppc/syslib/m8xx_setup.c
+++ b/arch/ppc/syslib/m8xx_setup.c
@@ -141,16 +141,6 @@ m8xx_setup_arch(void)
141#endif 141#endif
142#endif 142#endif
143 143
144#if defined (CONFIG_MPC86XADS) || defined (CONFIG_MPC885ADS)
145#if defined(CONFIG_MTD_PHYSMAP)
146 physmap_configure(binfo->bi_flashstart, binfo->bi_flashsize,
147 MPC8xxADS_BANK_WIDTH, NULL);
148#ifdef CONFIG_MTD_PARTITIONS
149 physmap_set_partitions(mpc8xxads_partitions, mpc8xxads_part_num);
150#endif /* CONFIG_MTD_PARTITIONS */
151#endif /* CONFIG_MTD_PHYSMAP */
152#endif
153
154 board_init(); 144 board_init();
155} 145}
156 146
diff --git a/include/asm-ppc/mpc8260.h b/include/asm-ppc/mpc8260.h
index 23579d4afae7..402ba15c2e80 100644
--- a/include/asm-ppc/mpc8260.h
+++ b/include/asm-ppc/mpc8260.h
@@ -35,10 +35,6 @@
35#include <platforms/tqm8260.h> 35#include <platforms/tqm8260.h>
36#endif 36#endif
37 37
38#if defined(CONFIG_PQ2ADS) || defined (CONFIG_PQ2FADS)
39#include <platforms/pq2ads.h>
40#endif
41
42#ifdef CONFIG_PCI_8260 38#ifdef CONFIG_PCI_8260
43#include <syslib/m82xx_pci.h> 39#include <syslib/m82xx_pci.h>
44#endif 40#endif
diff --git a/include/asm-ppc/mpc8xx.h b/include/asm-ppc/mpc8xx.h
index d3a2f2fe230c..b9e3060b0278 100644
--- a/include/asm-ppc/mpc8xx.h
+++ b/include/asm-ppc/mpc8xx.h
@@ -63,10 +63,6 @@
63#include <platforms/lantec.h> 63#include <platforms/lantec.h>
64#endif 64#endif
65 65
66#if defined(CONFIG_MPC885ADS)
67#include <platforms/mpc885ads.h>
68#endif
69
70/* Currently, all 8xx boards that support a processor to PCI/ISA bridge 66/* Currently, all 8xx boards that support a processor to PCI/ISA bridge
71 * use the same memory map. 67 * use the same memory map.
72 */ 68 */
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-22 01:53:09 -0500