3 files changed, 148 insertions, 15 deletions

diff --git a/drivers/ssb/pci.c b/drivers/ssb/pci.c
index 40ea41762247..593fc618a2ea 100644
--- a/drivers/ssb/pci.c
+++ b/drivers/ssb/pci.c
@@ -169,8 +169,14 @@ err_pci:
 /* Get the word-offset for a SSB_SPROM_XXX define. */
 #define SPOFF(offset)   (((offset) - SSB_SPROM_BASE) / sizeof(u16))
 /* Helper to extract some _offset, which is one of the SSB_SPROM_XXX defines. */
-#define SPEX(_outvar, _offset, _mask, _shift)   \
+#define SPEX16(_outvar, _offset, _mask, _shift) \
         out->_outvar = ((in[SPOFF(_offset)] & (_mask)) >> (_shift))
+#define SPEX32(_outvar, _offset, _mask, _shift) \
+        out->_outvar = ((((u32)in[SPOFF((_offset)+2)] << 16 | \
+                           in[SPOFF(_offset)]) & (_mask)) >> (_shift))
+#define SPEX(_outvar, _offset, _mask, _shift) \
+        SPEX16(_outvar, _offset, _mask, _shift)
+
 
 static inline u8 ssb_crc8(u8 crc, u8 data)
 {
@@ -480,6 +486,8 @@ static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in)
         SPEX(country_code, SSB_SPROM8_CCODE, 0xFFFF, 0);
         SPEX(boardflags_lo, SSB_SPROM8_BFLLO, 0xFFFF, 0);
         SPEX(boardflags_hi, SSB_SPROM8_BFLHI, 0xFFFF, 0);
+        SPEX(boardflags2_lo, SSB_SPROM8_BFL2LO, 0xFFFF, 0);
+        SPEX(boardflags2_hi, SSB_SPROM8_BFL2HI, 0xFFFF, 0);
         SPEX(ant_available_a, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_A,
              SSB_SPROM8_ANTAVAIL_A_SHIFT);
         SPEX(ant_available_bg, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_BG,
@@ -490,12 +498,55 @@ static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in)
         SPEX(maxpwr_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_MAXP_A_MASK, 0);
         SPEX(itssi_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_ITSSI_A,
              SSB_SPROM8_ITSSI_A_SHIFT);
+        SPEX(maxpwr_ah, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AH_MASK, 0);
+        SPEX(maxpwr_al, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AL_MASK,
+             SSB_SPROM8_MAXP_AL_SHIFT);
         SPEX(gpio0, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P0, 0);
         SPEX(gpio1, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P1,
              SSB_SPROM8_GPIOA_P1_SHIFT);
         SPEX(gpio2, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P2, 0);
         SPEX(gpio3, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P3,
              SSB_SPROM8_GPIOB_P3_SHIFT);
+        SPEX(tri2g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI2G, 0);
+        SPEX(tri5g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI5G,
+             SSB_SPROM8_TRI5G_SHIFT);
+        SPEX(tri5gl, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GL, 0);
+        SPEX(tri5gh, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GH,
+             SSB_SPROM8_TRI5GH_SHIFT);
+        SPEX(rxpo2g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO2G, 0);
+        SPEX(rxpo5g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO5G,
+             SSB_SPROM8_RXPO5G_SHIFT);
+        SPEX(rssismf2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMF2G, 0);
+        SPEX(rssismc2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMC2G,
+             SSB_SPROM8_RSSISMC2G_SHIFT);
+        SPEX(rssisav2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISAV2G,
+             SSB_SPROM8_RSSISAV2G_SHIFT);
+        SPEX(bxa2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_BXA2G,
+             SSB_SPROM8_BXA2G_SHIFT);
+        SPEX(rssismf5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMF5G, 0);
+        SPEX(rssismc5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMC5G,
+             SSB_SPROM8_RSSISMC5G_SHIFT);
+        SPEX(rssisav5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISAV5G,
+             SSB_SPROM8_RSSISAV5G_SHIFT);
+        SPEX(bxa5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_BXA5G,
+             SSB_SPROM8_BXA5G_SHIFT);
+        SPEX(pa0b0, SSB_SPROM8_PA0B0, 0xFFFF, 0);
+        SPEX(pa0b1, SSB_SPROM8_PA0B1, 0xFFFF, 0);
+        SPEX(pa0b2, SSB_SPROM8_PA0B2, 0xFFFF, 0);
+        SPEX(pa1b0, SSB_SPROM8_PA1B0, 0xFFFF, 0);
+        SPEX(pa1b1, SSB_SPROM8_PA1B1, 0xFFFF, 0);
+        SPEX(pa1b2, SSB_SPROM8_PA1B2, 0xFFFF, 0);
+        SPEX(pa1lob0, SSB_SPROM8_PA1LOB0, 0xFFFF, 0);
+        SPEX(pa1lob1, SSB_SPROM8_PA1LOB1, 0xFFFF, 0);
+        SPEX(pa1lob2, SSB_SPROM8_PA1LOB2, 0xFFFF, 0);
+        SPEX(pa1hib0, SSB_SPROM8_PA1HIB0, 0xFFFF, 0);
+        SPEX(pa1hib1, SSB_SPROM8_PA1HIB1, 0xFFFF, 0);
+        SPEX(pa1hib2, SSB_SPROM8_PA1HIB2, 0xFFFF, 0);
+        SPEX(cck2gpo, SSB_SPROM8_CCK2GPO, 0xFFFF, 0);
+        SPEX32(ofdm2gpo, SSB_SPROM8_OFDM2GPO, 0xFFFFFFFF, 0);
+        SPEX32(ofdm5glpo, SSB_SPROM8_OFDM5GLPO, 0xFFFFFFFF, 0);
+        SPEX32(ofdm5gpo, SSB_SPROM8_OFDM5GPO, 0xFFFFFFFF, 0);
+        SPEX32(ofdm5ghpo, SSB_SPROM8_OFDM5GHPO, 0xFFFFFFFF, 0);
 
         /* Extract the antenna gain values. */
         SPEX(antenna_gain.ghz24.a0, SSB_SPROM8_AGAIN01,
diff --git a/include/linux/ssb/ssb.h b/include/linux/ssb/ssb.h
index 5ae8fa22d331..17ffc1f84d76 100644
--- a/include/linux/ssb/ssb.h
+++ b/include/linux/ssb/ssb.h
@@ -27,24 +27,54 @@ struct ssb_sprom {
         u8 et1mdcport;          /* MDIO for enet1 */
         u8 board_rev;           /* Board revision number from SPROM. */
         u8 country_code;        /* Country Code */
-        u8 ant_available_a;     /* A-PHY antenna available bits (up to 4) */
-        u8 ant_available_bg;    /* B/G-PHY antenna available bits (up to 4) */
+        u8 ant_available_a;     /* 2GHz antenna available bits (up to 4) */
+        u8 ant_available_bg;    /* 5GHz antenna available bits (up to 4) */
         u16 pa0b0;
         u16 pa0b1;
         u16 pa0b2;
         u16 pa1b0;
         u16 pa1b1;
         u16 pa1b2;
+        u16 pa1lob0;
+        u16 pa1lob1;
+        u16 pa1lob2;
+        u16 pa1hib0;
+        u16 pa1hib1;
+        u16 pa1hib2;
         u8 gpio0;               /* GPIO pin 0 */
         u8 gpio1;               /* GPIO pin 1 */
         u8 gpio2;               /* GPIO pin 2 */
         u8 gpio3;               /* GPIO pin 3 */
-        u16 maxpwr_a;           /* A-PHY Amplifier Max Power (in dBm Q5.2) */
-        u16 maxpwr_bg;          /* B/G-PHY Amplifier Max Power (in dBm Q5.2) */
+        u16 maxpwr_bg;          /* 2.4GHz Amplifier Max Power (in dBm Q5.2) */
+        u16 maxpwr_al;          /* 5.2GHz Amplifier Max Power (in dBm Q5.2) */
+        u16 maxpwr_a;           /* 5.3GHz Amplifier Max Power (in dBm Q5.2) */
+        u16 maxpwr_ah;          /* 5.8GHz Amplifier Max Power (in dBm Q5.2) */
         u8 itssi_a;             /* Idle TSSI Target for A-PHY */
         u8 itssi_bg;            /* Idle TSSI Target for B/G-PHY */
-        u16 boardflags_lo;      /* Boardflags (low 16 bits) */
-        u16 boardflags_hi;      /* Boardflags (high 16 bits) */
+        u8 tri2g;               /* 2.4GHz TX isolation */
+        u8 tri5gl;              /* 5.2GHz TX isolation */
+        u8 tri5g;               /* 5.3GHz TX isolation */
+        u8 tri5gh;              /* 5.8GHz TX isolation */
+        u8 rxpo2g;              /* 2GHz RX power offset */
+        u8 rxpo5g;              /* 5GHz RX power offset */
+        u8 rssisav2g;           /* 2GHz RSSI params */
+        u8 rssismc2g;
+        u8 rssismf2g;
+        u8 bxa2g;               /* 2GHz BX arch */
+        u8 rssisav5g;           /* 5GHz RSSI params */
+        u8 rssismc5g;
+        u8 rssismf5g;
+        u8 bxa5g;               /* 5GHz BX arch */
+        u16 cck2gpo;            /* CCK power offset */
+        u32 ofdm2gpo;           /* 2.4GHz OFDM power offset */
+        u32 ofdm5glpo;          /* 5.2GHz OFDM power offset */
+        u32 ofdm5gpo;           /* 5.3GHz OFDM power offset */
+        u32 ofdm5ghpo;          /* 5.8GHz OFDM power offset */
+        u16 boardflags_lo;      /* Board flags (bits 0-15) */
+        u16 boardflags_hi;      /* Board flags (bits 16-31) */
+        u16 boardflags2_lo;     /* Board flags (bits 32-47) */
+        u16 boardflags2_hi;     /* Board flags (bits 48-63) */
+        /* TODO store board flags in a single u64 */
 
         /* Antenna gain values for up to 4 antennas
          * on each band. Values in dBm/4 (Q5.2). Negative gain means the
@@ -58,7 +88,7 @@ struct ssb_sprom {
                 } ghz5;         /* 5GHz band */
         } antenna_gain;
 
-        /* TODO - add any parameters needed from rev 2, 3, or 4 SPROMs */
+        /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */
 };
 
 /* Information about the PCB the circuitry is soldered on. */
diff --git a/include/linux/ssb/ssb_regs.h b/include/linux/ssb/ssb_regs.h
index a01b982b5783..9ae9082eaeb4 100644
--- a/include/linux/ssb/ssb_regs.h
+++ b/include/linux/ssb/ssb_regs.h
@@ -162,7 +162,7 @@
 
 /* SPROM shadow area. If not otherwise noted, fields are
  * two bytes wide. Note that the SPROM can _only_ be read
- * in two-byte quantinies.
+ * in two-byte quantities.
  */
 #define SSB_SPROMSIZE_WORDS             64
 #define SSB_SPROMSIZE_BYTES             (SSB_SPROMSIZE_WORDS * sizeof(u16))
@@ -327,8 +327,11 @@
 #define  SSB_SPROM5_GPIOB_P3_SHIFT      8
 
 /* SPROM Revision 8 */
-#define SSB_SPROM8_BFLLO                0x1084  /* Boardflags (low 16 bits) */
-#define SSB_SPROM8_BFLHI                0x1086  /* Boardflags Hi */
+#define SSB_SPROM8_BOARDREV             0x1082  /* Board revision */
+#define SSB_SPROM8_BFLLO                0x1084  /* Board flags (bits 0-15) */
+#define SSB_SPROM8_BFLHI                0x1086  /* Board flags (bits 16-31) */
+#define SSB_SPROM8_BFL2LO               0x1088  /* Board flags (bits 32-47) */
+#define SSB_SPROM8_BFL2HI               0x108A  /* Board flags (bits 48-63) */
 #define SSB_SPROM8_IL0MAC               0x108C  /* 6 byte MAC address */
 #define SSB_SPROM8_CCODE                0x1092  /* 2 byte country code */
 #define SSB_SPROM8_ANTAVAIL             0x109C  /* Antenna available bitfields*/
@@ -354,14 +357,63 @@
 #define  SSB_SPROM8_GPIOB_P2            0x00FF  /* Pin 2 */
 #define  SSB_SPROM8_GPIOB_P3            0xFF00  /* Pin 3 */
 #define  SSB_SPROM8_GPIOB_P3_SHIFT      8
-#define SSB_SPROM8_MAXP_BG              0x10C0  /* Max Power BG in path 1 */
-#define  SSB_SPROM8_MAXP_BG_MASK        0x00FF  /* Mask for Max Power BG */
+#define SSB_SPROM8_RSSIPARM2G           0x10A4  /* RSSI params for 2GHz */
+#define  SSB_SPROM8_RSSISMF2G           0x000F
+#define  SSB_SPROM8_RSSISMC2G           0x00F0
+#define  SSB_SPROM8_RSSISMC2G_SHIFT     4
+#define  SSB_SPROM8_RSSISAV2G           0x0700
+#define  SSB_SPROM8_RSSISAV2G_SHIFT     8
+#define  SSB_SPROM8_BXA2G               0x1800
+#define  SSB_SPROM8_BXA2G_SHIFT         11
+#define SSB_SPROM8_RSSIPARM5G           0x10A6  /* RSSI params for 5GHz */
+#define  SSB_SPROM8_RSSISMF5G           0x000F
+#define  SSB_SPROM8_RSSISMC5G           0x00F0
+#define  SSB_SPROM8_RSSISMC5G_SHIFT     4
+#define  SSB_SPROM8_RSSISAV5G           0x0700
+#define  SSB_SPROM8_RSSISAV5G_SHIFT     8
+#define  SSB_SPROM8_BXA5G               0x1800
+#define  SSB_SPROM8_BXA5G_SHIFT         11
+#define SSB_SPROM8_TRI25G               0x10A8  /* TX isolation 2.4&5.3GHz */
+#define  SSB_SPROM8_TRI2G               0x00FF  /* TX isolation 2.4GHz */
+#define  SSB_SPROM8_TRI5G               0xFF00  /* TX isolation 5.3GHz */
+#define  SSB_SPROM8_TRI5G_SHIFT         8
+#define SSB_SPROM8_TRI5GHL              0x10AA  /* TX isolation 5.2/5.8GHz */
+#define  SSB_SPROM8_TRI5GL              0x00FF  /* TX isolation 5.2GHz */
+#define  SSB_SPROM8_TRI5GH              0xFF00  /* TX isolation 5.8GHz */
+#define  SSB_SPROM8_TRI5GH_SHIFT        8
+#define SSB_SPROM8_RXPO                 0x10AC  /* RX power offsets */
+#define  SSB_SPROM8_RXPO2G              0x00FF  /* 2GHz RX power offset */
+#define  SSB_SPROM8_RXPO5G              0xFF00  /* 5GHz RX power offset */
+#define  SSB_SPROM8_RXPO5G_SHIFT        8
+#define SSB_SPROM8_MAXP_BG              0x10C0  /* Max Power 2GHz in path 1 */
+#define  SSB_SPROM8_MAXP_BG_MASK        0x00FF  /* Mask for Max Power 2GHz */
 #define  SSB_SPROM8_ITSSI_BG            0xFF00  /* Mask for path 1 itssi_bg */
 #define  SSB_SPROM8_ITSSI_BG_SHIFT      8
-#define SSB_SPROM8_MAXP_A               0x10C8  /* Max Power A in path 1 */
-#define  SSB_SPROM8_MAXP_A_MASK         0x00FF  /* Mask for Max Power A */
+#define SSB_SPROM8_PA0B0                0x10C2  /* 2GHz power amp settings */
+#define SSB_SPROM8_PA0B1                0x10C4
+#define SSB_SPROM8_PA0B2                0x10C6
+#define SSB_SPROM8_MAXP_A               0x10C8  /* Max Power 5.3GHz */
+#define  SSB_SPROM8_MAXP_A_MASK         0x00FF  /* Mask for Max Power 5.3GHz */
 #define  SSB_SPROM8_ITSSI_A             0xFF00  /* Mask for path 1 itssi_a */
 #define  SSB_SPROM8_ITSSI_A_SHIFT       8
+#define SSB_SPROM8_MAXP_AHL             0x10CA  /* Max Power 5.2/5.8GHz */
+#define  SSB_SPROM8_MAXP_AH_MASK        0x00FF  /* Mask for Max Power 5.8GHz */
+#define  SSB_SPROM8_MAXP_AL_MASK        0xFF00  /* Mask for Max Power 5.2GHz */
+#define  SSB_SPROM8_MAXP_AL_SHIFT       8
+#define SSB_SPROM8_PA1B0                0x10CC  /* 5.3GHz power amp settings */
+#define SSB_SPROM8_PA1B1                0x10CE
+#define SSB_SPROM8_PA1B2                0x10D0
+#define SSB_SPROM8_PA1LOB0              0x10D2  /* 5.2GHz power amp settings */
+#define SSB_SPROM8_PA1LOB1              0x10D4
+#define SSB_SPROM8_PA1LOB2              0x10D6
+#define SSB_SPROM8_PA1HIB0              0x10D8  /* 5.8GHz power amp settings */
+#define SSB_SPROM8_PA1HIB1              0x10DA
+#define SSB_SPROM8_PA1HIB2              0x10DC
+#define SSB_SPROM8_CCK2GPO              0x1140  /* CCK power offset */
+#define SSB_SPROM8_OFDM2GPO             0x1142  /* 2.4GHz OFDM power offset */
+#define SSB_SPROM8_OFDM5GPO             0x1146  /* 5.3GHz OFDM power offset */
+#define SSB_SPROM8_OFDM5GLPO            0x114A  /* 5.2GHz OFDM power offset */
+#define SSB_SPROM8_OFDM5GHPO            0x114E  /* 5.8GHz OFDM power offset */
 
 /* Values for SSB_SPROM1_BINF_CCODE */
 enum {