7 files changed, 33 insertions, 12 deletions

diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c
index d4590f546c49..7ed279b0a12e 100644
--- a/drivers/ata/pata_cs5520.c
+++ b/drivers/ata/pata_cs5520.c
@@ -229,7 +229,7 @@ static int __devinit cs5520_init_one(struct pci_dev *pdev, const struct pci_devi
                 return -ENOMEM;
 
         /* Perform set up for DMA */
-        if (pci_enable_device_bars(pdev, 1<<2)) {
+        if (pci_enable_device_io(pdev)) {
                 printk(KERN_ERR DRV_NAME ": unable to configure BAR2.\n");
                 return -ENODEV;
         }
diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c
index e6c4a2b762ec..f5e7a70da831 100644
--- a/drivers/i2c/busses/scx200_acb.c
+++ b/drivers/i2c/busses/scx200_acb.c
@@ -492,7 +492,7 @@ static __init int scx200_create_pci(const char *text, struct pci_dev *pdev,
         iface->pdev = pdev;
         iface->bar = bar;
 
-        rc = pci_enable_device_bars(iface->pdev, 1 << iface->bar);
+        rc = pci_enable_device_io(iface->pdev);
         if (rc)
                 goto errout_free;
 
diff --git a/drivers/ide/pci/cs5520.c b/drivers/ide/pci/cs5520.c
index 6ec00b8d7ec1..10adc49f80ca 100644
--- a/drivers/ide/pci/cs5520.c
+++ b/drivers/ide/pci/cs5520.c
@@ -156,8 +156,14 @@ static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_devic
         ide_setup_pci_noise(dev, d);
 
         /* We must not grab the entire device, it has 'ISA' space in its
-           BARS too and we will freak out other bits of the kernel */
-        if (pci_enable_device_bars(dev, 1<<2)) {
+         * BARS too and we will freak out other bits of the kernel
+         *
+         * pci_enable_device_bars() is going away. I replaced it with
+         * IO only enable for now but I'll need confirmation this is
+         * allright for that device. If not, it will need some kind of
+         * quirk. --BenH.
+         */
+        if (pci_enable_device_io(dev)) {
                 printk(KERN_WARNING "%s: Unable to enable 55x0.\n", d->name);
                 return -ENODEV;
         }
diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c
index 676c66e72881..cf79470a932d 100644
--- a/drivers/ide/setup-pci.c
+++ b/drivers/ide/setup-pci.c
@@ -240,7 +240,9 @@ EXPORT_SYMBOL_GPL(ide_setup_pci_noise);
  *      @d: IDE port info
  *
  *      Enable the IDE PCI device. We attempt to enable the device in full
- *      but if that fails then we only need BAR4 so we will enable that.
+ *      but if that fails then we only need IO space. The PCI code should
+ *      have setup the proper resources for us already for controllers in
+ *      legacy mode.
  *      
  *      Returns zero on success or an error code
  */
@@ -250,7 +252,7 @@ static int ide_pci_enable(struct pci_dev *dev, const struct ide_port_info *d)
         int ret;
 
         if (pci_enable_device(dev)) {
-                ret = pci_enable_device_bars(dev, 1 << 4);
+                ret = pci_enable_device_io(dev);
                 if (ret < 0) {
                         printk(KERN_WARNING "%s: (ide_setup_pci_device:) "
                                 "Could not enable device.\n", d->name);
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 3205f7488d1c..29b4cf9e059b 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -2296,10 +2296,9 @@ static pci_ers_result_t lpfc_io_slot_reset(struct pci_dev *pdev)
         struct Scsi_Host *shost = pci_get_drvdata(pdev);
         struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
         struct lpfc_sli *psli = &phba->sli;
-        int bars = pci_select_bars(pdev, IORESOURCE_MEM);
 
         dev_printk(KERN_INFO, &pdev->dev, "recovering from a slot reset.\n");
-        if (pci_enable_device_bars(pdev, bars)) {
+        if (pci_enable_device_mem(pdev)) {
                 printk(KERN_ERR "lpfc: Cannot re-enable "
                         "PCI device after reset.\n");
                 return PCI_ERS_RESULT_DISCONNECT;
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 6f129da37589..b72c7f170854 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -2268,6 +2268,7 @@ typedef struct scsi_qla_host {
         spinlock_t              hardware_lock ____cacheline_aligned;
 
         int             bars;
+        int             mem_only;
         device_reg_t __iomem *iobase;           /* Base I/O address */
         resource_size_t pio_address;
 #define MIN_IOBASE_LEN          0x100
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 3954ed2d7b51..8f69caf83272 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -1564,7 +1564,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
         char pci_info[30];
         char fw_str[30];
         struct scsi_host_template *sht;
-        int bars;
+        int bars, mem_only = 0;
 
         bars = pci_select_bars(pdev, IORESOURCE_MEM | IORESOURCE_IO);
         sht = &qla2x00_driver_template;
@@ -1575,10 +1575,16 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
             pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2532) {
                 bars = pci_select_bars(pdev, IORESOURCE_MEM);
                 sht = &qla24xx_driver_template;
+                mem_only = 1;
         }
 
-        if (pci_enable_device_bars(pdev, bars))
-                goto probe_out;
+        if (mem_only) {
+                if (pci_enable_device_mem(pdev))
+                        goto probe_out;
+        } else {
+                if (pci_enable_device(pdev))
+                        goto probe_out;
+        }
 
         if (pci_find_aer_capability(pdev))
                 if (pci_enable_pcie_error_reporting(pdev))
@@ -1601,6 +1607,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
         sprintf(ha->host_str, "%s_%ld", QLA2XXX_DRIVER_NAME, ha->host_no);
         ha->parent = NULL;
         ha->bars = bars;
+        ha->mem_only = mem_only;
 
         /* Set ISP-type information. */
         qla2x00_set_isp_flags(ha);
@@ -2875,8 +2882,14 @@ qla2xxx_pci_slot_reset(struct pci_dev *pdev)
 {
         pci_ers_result_t ret = PCI_ERS_RESULT_DISCONNECT;
         scsi_qla_host_t *ha = pci_get_drvdata(pdev);
+        int rc;
+
+        if (ha->mem_only)
+                rc = pci_enable_device_mem(pdev);
+        else
+                rc = pci_enable_device(pdev);
 
-        if (pci_enable_device_bars(pdev, ha->bars)) {
+        if (rc) {
                 qla_printk(KERN_WARNING, ha,
                     "Can't re-enable PCI device after reset.\n");