3 files changed, 119 insertions, 0 deletions

diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 0b368dc49aea..de9cf5136fdc 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -77,6 +77,11 @@ config STE10XP
         ---help---
           This is the driver for the STe100p and STe101p PHYs.
 
+config LSI_ET1011C_PHY
+        tristate "Driver for LSI ET1011C PHY"
+        ---help---
+          Supports the LSI ET1011C PHY.
+
 config FIXED_PHY
         bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
         depends on PHYLIB=y
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index 67959c9d4ca5..3a1bfefefbc3 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_VITESSE_PHY)	+= vitesse.o
 obj-$(CONFIG_BROADCOM_PHY)      += broadcom.o
 obj-$(CONFIG_ICPLUS_PHY)        += icplus.o
 obj-$(CONFIG_REALTEK_PHY)       += realtek.o
+obj-$(CONFIG_LSI_ET1011C_PHY)   += et1011c.o
 obj-$(CONFIG_FIXED_PHY)         += fixed.o
 obj-$(CONFIG_MDIO_BITBANG)      += mdio-bitbang.o
 obj-$(CONFIG_MDIO_GPIO)         += mdio-gpio.o
diff --git a/drivers/net/phy/et1011c.c b/drivers/net/phy/et1011c.c
new file mode 100644
index 000000000000..b031fa21f1aa
--- /dev/null
+++ b/drivers/net/phy/et1011c.c
@@ -0,0 +1,113 @@
+/*
+ * drivers/net/phy/et1011c.c
+ *
+ * Driver for LSI ET1011C PHYs
+ *
+ * Author: Chaithrika U S
+ *
+ * Copyright (c) 2008 Texas Instruments
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/unistd.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/phy.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+#include <asm/irq.h>
+
+#define ET1011C_STATUS_REG      (0x1A)
+#define ET1011C_CONFIG_REG      (0x16)
+#define ET1011C_SPEED_MASK              (0x0300)
+#define ET1011C_GIGABIT_SPEED           (0x0200)
+#define ET1011C_TX_FIFO_MASK            (0x3000)
+#define ET1011C_TX_FIFO_DEPTH_8         (0x0000)
+#define ET1011C_TX_FIFO_DEPTH_16        (0x1000)
+#define ET1011C_INTERFACE_MASK          (0x0007)
+#define ET1011C_GMII_INTERFACE          (0x0002)
+#define ET1011C_SYS_CLK_EN              (0x01 << 4)
+
+
+MODULE_DESCRIPTION("LSI ET1011C PHY driver");
+MODULE_AUTHOR("Chaithrika U S");
+MODULE_LICENSE("GPL");
+
+static int et1011c_config_aneg(struct phy_device *phydev)
+{
+        int ctl = 0;
+        ctl = phy_read(phydev, MII_BMCR);
+        if (ctl < 0)
+                return ctl;
+        ctl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_SPEED1000 |
+                 BMCR_ANENABLE);
+        /* First clear the PHY */
+        phy_write(phydev, MII_BMCR, ctl | BMCR_RESET);
+
+        return genphy_config_aneg(phydev);
+}
+
+static int et1011c_read_status(struct phy_device *phydev)
+{
+        int ret;
+        u32 val;
+        static int speed;
+        ret = genphy_read_status(phydev);
+
+        if (speed != phydev->speed) {
+                speed = phydev->speed;
+                val = phy_read(phydev, ET1011C_STATUS_REG);
+                if ((val & ET1011C_SPEED_MASK) ==
+                                        ET1011C_GIGABIT_SPEED) {
+                        val = phy_read(phydev, ET1011C_CONFIG_REG);
+                        val &= ~ET1011C_TX_FIFO_MASK;
+                        phy_write(phydev, ET1011C_CONFIG_REG, val\
+                                        | ET1011C_GMII_INTERFACE\
+                                        | ET1011C_SYS_CLK_EN\
+                                        | ET1011C_TX_FIFO_DEPTH_16);
+
+                }
+        }
+        return ret;
+}
+
+static struct phy_driver et1011c_driver = {
+        .phy_id         = 0x0282f014,
+        .name           = "ET1011C",
+        .phy_id_mask    = 0xfffffff0,
+        .features       = (PHY_BASIC_FEATURES | SUPPORTED_1000baseT_Full),
+        .flags          = PHY_POLL,
+        .config_aneg    = et1011c_config_aneg,
+        .read_status    = et1011c_read_status,
+        .driver         = { .owner = THIS_MODULE,},
+};
+
+static int __init et1011c_init(void)
+{
+        return phy_driver_register(&et1011c_driver);
+}
+
+static void __exit et1011c_exit(void)
+{
+        phy_driver_unregister(&et1011c_driver);
+}
+
+module_init(et1011c_init);
+module_exit(et1011c_exit);