1 files changed, 12 insertions, 12 deletions

diff --git a/Documentation/video4linux/cx18.txt b/Documentation/video4linux/cx18.txt
index 6842c262890f..ecab5a06bd74 100644
--- a/Documentation/video4linux/cx18.txt
+++ b/Documentation/video4linux/cx18.txt
@@ -1,23 +1,23 @@
 Some notes regarding the cx18 driver for the Conexant CX23418 MPEG
 encoder chip:
 
-1) The only hardware currently supported is the Hauppauge HVR-1600
-   card and the Compro VideoMate H900 (note that this card only
-   supports analog input, it has no digital tuner!).
+1) Currently supported are:
 
-2) Some people have problems getting the i2c bus to work. Cause unknown.
-   The symptom is that the eeprom cannot be read and the card is
-   unusable.
+        - Hauppauge HVR-1600
+        - Compro VideoMate H900
+        - Yuan MPC718
+        - Conexant Raptor PAL/SECAM devkit
 
-3) The audio from the analog tuner is mono only. Probably caused by
-   incorrect audio register information in the datasheet. We are
-   waiting for updated information from Conexant.
+2) Some people have problems getting the i2c bus to work.
+   The symptom is that the eeprom cannot be read and the card is
+   unusable. This is probably fixed, but if you have problems
+   then post to the video4linux or ivtv-users mailinglist.
 
-4) VBI (raw or sliced) has not yet been implemented.
+3) VBI (raw or sliced) has not yet been implemented.
 
-5) MPEG indexing is not yet implemented.
+4) MPEG indexing is not yet implemented.
 
-6) The driver is still a bit rough around the edges, this should
+5) The driver is still a bit rough around the edges, this should
    improve over time.