aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/hwmon/adt747379
-rw-r--r--drivers/hwmon/Kconfig10
-rw-r--r--drivers/hwmon/Makefile1
-rw-r--r--drivers/hwmon/adt7473.c1157
4 files changed, 1247 insertions, 0 deletions
diff --git a/Documentation/hwmon/adt7473 b/Documentation/hwmon/adt7473
new file mode 100644
index 000000000000..22d8b19046ab
--- /dev/null
+++ b/Documentation/hwmon/adt7473
@@ -0,0 +1,79 @@
1Kernel driver adt7473
2======================
3
4Supported chips:
5 * Analog Devices ADT7473
6 Prefix: 'adt7473'
7 Addresses scanned: I2C 0x2C, 0x2D, 0x2E
8 Datasheet: Publicly available at the Analog Devices website
9
10Author: Darrick J. Wong
11
12Description
13-----------
14
15This driver implements support for the Analog Devices ADT7473 chip family.
16
17The LM85 uses the 2-wire interface compatible with the SMBUS 2.0
18specification. Using an analog to digital converter it measures three (3)
19temperatures and two (2) voltages. It has three (3) 16-bit counters for
20measuring fan speed. There are three (3) PWM outputs that can be used
21to control fan speed.
22
23A sophisticated control system for the PWM outputs is designed into the
24LM85 that allows fan speed to be adjusted automatically based on any of the
25three temperature sensors. Each PWM output is individually adjustable and
26programmable. Once configured, the ADT7473 will adjust the PWM outputs in
27response to the measured temperatures without further host intervention.
28This feature can also be disabled for manual control of the PWM's.
29
30Each of the measured inputs (voltage, temperature, fan speed) has
31corresponding high/low limit values. The ADT7473 will signal an ALARM if
32any measured value exceeds either limit.
33
34The ADT7473 samples all inputs continuously. The driver will not read
35the registers more often than once every other second. Further,
36configuration data is only read once per minute.
37
38Special Features
39----------------
40
41The ADT7473 have a 10-bit ADC and can therefore measure temperatures
42with 0.25 degC resolution. Temperature readings can be configured either
43for twos complement format or "Offset 64" format, wherein 63 is subtracted
44from the raw value to get the temperature value.
45
46The Analog Devices datasheet is very detailed and describes a procedure for
47determining an optimal configuration for the automatic PWM control.
48
49Hardware Configurations
50-----------------------
51
52The ADT7473 chips have an optional SMBALERT output that can be used to
53signal the chipset in case a limit is exceeded or the temperature sensors
54fail. Individual sensor interrupts can be masked so they won't trigger
55SMBALERT. The SMBALERT output if configured replaces the PWM2 function.
56
57Configuration Notes
58-------------------
59
60Besides standard interfaces driver adds the following:
61
62* PWM Control
63
64* pwm#_auto_point1_pwm and pwm#_auto_point1_temp and
65* pwm#_auto_point2_pwm and pwm#_auto_point2_temp -
66
67point1: Set the pwm speed at a lower temperature bound.
68point2: Set the pwm speed at a higher temperature bound.
69
70The ADT7473 will scale the pwm between the lower and higher pwm speed when
71the temperature is between the two temperature boundaries. PWM values range
72from 0 (off) to 255 (full speed).
73
74Notes
75-----
76
77The NVIDIA binary driver presents an ADT7473 chip via an on-card i2c bus.
78Unfortunately, they fail to set the i2c adapter class, so this driver may
79fail to find the chip until the nvidia driver is patched.
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 410ffe4e9d80..368879ff5d8c 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -143,6 +143,16 @@ config SENSORS_ADT7470
143 This driver can also be built as a module. If so, the module 143 This driver can also be built as a module. If so, the module
144 will be called adt7470. 144 will be called adt7470.
145 145
146config SENSORS_ADT7473
147 tristate "Analog Devices ADT7473"
148 depends on I2C && EXPERIMENTAL
149 help
150 If you say yes here you get support for the Analog Devices
151 ADT7473 temperature monitoring chips.
152
153 This driver can also be built as a module. If so, the module
154 will be called adt7473.
155
146config SENSORS_K8TEMP 156config SENSORS_K8TEMP
147 tristate "AMD Athlon64/FX or Opteron temperature sensor" 157 tristate "AMD Athlon64/FX or Opteron temperature sensor"
148 depends on X86 && PCI && EXPERIMENTAL 158 depends on X86 && PCI && EXPERIMENTAL
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 824161337f1c..3bdb05a5cbd7 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -24,6 +24,7 @@ obj-$(CONFIG_SENSORS_ADM1031) += adm1031.o
24obj-$(CONFIG_SENSORS_ADM9240) += adm9240.o 24obj-$(CONFIG_SENSORS_ADM9240) += adm9240.o
25obj-$(CONFIG_SENSORS_ADS7828) += ads7828.o 25obj-$(CONFIG_SENSORS_ADS7828) += ads7828.o
26obj-$(CONFIG_SENSORS_ADT7470) += adt7470.o 26obj-$(CONFIG_SENSORS_ADT7470) += adt7470.o
27obj-$(CONFIG_SENSORS_ADT7473) += adt7473.o
27obj-$(CONFIG_SENSORS_APPLESMC) += applesmc.o 28obj-$(CONFIG_SENSORS_APPLESMC) += applesmc.o
28obj-$(CONFIG_SENSORS_AMS) += ams/ 29obj-$(CONFIG_SENSORS_AMS) += ams/
29obj-$(CONFIG_SENSORS_ATXP1) += atxp1.o 30obj-$(CONFIG_SENSORS_ATXP1) += atxp1.o
diff --git a/drivers/hwmon/adt7473.c b/drivers/hwmon/adt7473.c
new file mode 100644
index 000000000000..a3daeefff472
--- /dev/null
+++ b/drivers/hwmon/adt7473.c
@@ -0,0 +1,1157 @@
1/*
2 * A hwmon driver for the Analog Devices ADT7473
3 * Copyright (C) 2007 IBM
4 *
5 * Author: Darrick J. Wong <djwong@us.ibm.com>
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
20 */
21
22#include <linux/module.h>
23#include <linux/jiffies.h>
24#include <linux/i2c.h>
25#include <linux/hwmon.h>
26#include <linux/hwmon-sysfs.h>
27#include <linux/err.h>
28#include <linux/mutex.h>
29#include <linux/delay.h>
30#include <linux/log2.h>
31
32/* Addresses to scan */
33static unsigned short normal_i2c[] = { 0x2C, 0x2D, 0x2E, I2C_CLIENT_END };
34
35/* Insmod parameters */
36I2C_CLIENT_INSMOD_1(adt7473);
37
38/* ADT7473 registers */
39#define ADT7473_REG_BASE_ADDR 0x20
40
41#define ADT7473_REG_VOLT_BASE_ADDR 0x21
42#define ADT7473_REG_VOLT_MAX_ADDR 0x22
43#define ADT7473_REG_VOLT_MIN_BASE_ADDR 0x46
44#define ADT7473_REG_VOLT_MIN_MAX_ADDR 0x49
45
46#define ADT7473_REG_TEMP_BASE_ADDR 0x25
47#define ADT7473_REG_TEMP_MAX_ADDR 0x27
48#define ADT7473_REG_TEMP_LIMITS_BASE_ADDR 0x4E
49#define ADT7473_REG_TEMP_LIMITS_MAX_ADDR 0x53
50#define ADT7473_REG_TEMP_TMIN_BASE_ADDR 0x67
51#define ADT7473_REG_TEMP_TMIN_MAX_ADDR 0x69
52#define ADT7473_REG_TEMP_TMAX_BASE_ADDR 0x6A
53#define ADT7473_REG_TEMP_TMAX_MAX_ADDR 0x6C
54
55#define ADT7473_REG_FAN_BASE_ADDR 0x28
56#define ADT7473_REG_FAN_MAX_ADDR 0x2F
57#define ADT7473_REG_FAN_MIN_BASE_ADDR 0x54
58#define ADT7473_REG_FAN_MIN_MAX_ADDR 0x5B
59
60#define ADT7473_REG_PWM_BASE_ADDR 0x30
61#define ADT7473_REG_PWM_MAX_ADDR 0x32
62#define ADT7473_REG_PWM_MIN_BASE_ADDR 0x64
63#define ADT7473_REG_PWM_MIN_MAX_ADDR 0x66
64#define ADT7473_REG_PWM_MAX_BASE_ADDR 0x38
65#define ADT7473_REG_PWM_MAX_MAX_ADDR 0x3A
66#define ADT7473_REG_PWM_BHVR_BASE_ADDR 0x5C
67#define ADT7473_REG_PWM_BHVR_MAX_ADDR 0x5E
68#define ADT7473_PWM_BHVR_MASK 0xE0
69#define ADT7473_PWM_BHVR_SHIFT 5
70
71#define ADT7473_REG_CFG1 0x40
72#define ADT7473_CFG1_START 0x01
73#define ADT7473_CFG1_READY 0x04
74#define ADT7473_REG_CFG2 0x73
75#define ADT7473_REG_CFG3 0x78
76#define ADT7473_REG_CFG4 0x7D
77#define ADT7473_CFG4_MAX_DUTY_AT_OVT 0x08
78#define ADT7473_REG_CFG5 0x7C
79#define ADT7473_CFG5_TEMP_TWOS 0x01
80#define ADT7473_CFG5_TEMP_OFFSET 0x02
81
82#define ADT7473_REG_DEVICE 0x3D
83#define ADT7473_VENDOR 0x41
84#define ADT7473_REG_VENDOR 0x3E
85#define ADT7473_DEVICE 0x73
86#define ADT7473_REG_REVISION 0x3F
87#define ADT7473_REV_68 0x68
88#define ADT7473_REV_69 0x69
89
90#define ADT7473_REG_ALARM1 0x41
91#define ADT7473_VCCP_ALARM 0x02
92#define ADT7473_VCC_ALARM 0x04
93#define ADT7473_R1T_ALARM 0x10
94#define ADT7473_LT_ALARM 0x20
95#define ADT7473_R2T_ALARM 0x40
96#define ADT7473_OOL 0x80
97#define ADT7473_REG_ALARM2 0x42
98#define ADT7473_OVT_ALARM 0x02
99#define ADT7473_FAN1_ALARM 0x04
100#define ADT7473_FAN2_ALARM 0x08
101#define ADT7473_FAN3_ALARM 0x10
102#define ADT7473_FAN4_ALARM 0x20
103#define ADT7473_R1T_SHORT 0x40
104#define ADT7473_R2T_SHORT 0x80
105#define ADT7473_REG_MAX_ADDR 0x80
106
107#define ALARM2(x) ((x) << 8)
108
109#define ADT7473_VOLT_COUNT 2
110#define ADT7473_REG_VOLT(x) (ADT7473_REG_VOLT_BASE_ADDR + (x))
111#define ADT7473_REG_VOLT_MIN(x) (ADT7473_REG_VOLT_MIN_BASE_ADDR + ((x) * 2))
112#define ADT7473_REG_VOLT_MAX(x) (ADT7473_REG_VOLT_MIN_BASE_ADDR + \
113 ((x) * 2) + 1)
114
115#define ADT7473_TEMP_COUNT 3
116#define ADT7473_REG_TEMP(x) (ADT7473_REG_TEMP_BASE_ADDR + (x))
117#define ADT7473_REG_TEMP_MIN(x) (ADT7473_REG_TEMP_LIMITS_BASE_ADDR + ((x) * 2))
118#define ADT7473_REG_TEMP_MAX(x) (ADT7473_REG_TEMP_LIMITS_BASE_ADDR + \
119 ((x) * 2) + 1)
120#define ADT7473_REG_TEMP_TMIN(x) (ADT7473_REG_TEMP_TMIN_BASE_ADDR + (x))
121#define ADT7473_REG_TEMP_TMAX(x) (ADT7473_REG_TEMP_TMAX_BASE_ADDR + (x))
122
123#define ADT7473_FAN_COUNT 4
124#define ADT7473_REG_FAN(x) (ADT7473_REG_FAN_BASE_ADDR + ((x) * 2))
125#define ADT7473_REG_FAN_MIN(x) (ADT7473_REG_FAN_MIN_BASE_ADDR + ((x) * 2))
126
127#define ADT7473_PWM_COUNT 3
128#define ADT7473_REG_PWM(x) (ADT7473_REG_PWM_BASE_ADDR + (x))
129#define ADT7473_REG_PWM_MAX(x) (ADT7473_REG_PWM_MAX_BASE_ADDR + (x))
130#define ADT7473_REG_PWM_MIN(x) (ADT7473_REG_PWM_MIN_BASE_ADDR + (x))
131#define ADT7473_REG_PWM_BHVR(x) (ADT7473_REG_PWM_BHVR_BASE_ADDR + (x))
132
133/* How often do we reread sensors values? (In jiffies) */
134#define SENSOR_REFRESH_INTERVAL (2 * HZ)
135
136/* How often do we reread sensor limit values? (In jiffies) */
137#define LIMIT_REFRESH_INTERVAL (60 * HZ)
138
139/* datasheet says to divide this number by the fan reading to get fan rpm */
140#define FAN_PERIOD_TO_RPM(x) ((90000 * 60) / (x))
141#define FAN_RPM_TO_PERIOD FAN_PERIOD_TO_RPM
142#define FAN_PERIOD_INVALID 65535
143#define FAN_DATA_VALID(x) ((x) && (x) != FAN_PERIOD_INVALID)
144
145struct adt7473_data {
146 struct i2c_client client;
147 struct device *hwmon_dev;
148 struct attribute_group attrs;
149 struct mutex lock;
150 char sensors_valid;
151 char limits_valid;
152 unsigned long sensors_last_updated; /* In jiffies */
153 unsigned long limits_last_updated; /* In jiffies */
154
155 u8 volt[ADT7473_VOLT_COUNT];
156 s8 volt_min[ADT7473_VOLT_COUNT];
157 s8 volt_max[ADT7473_VOLT_COUNT];
158
159 s8 temp[ADT7473_TEMP_COUNT];
160 s8 temp_min[ADT7473_TEMP_COUNT];
161 s8 temp_max[ADT7473_TEMP_COUNT];
162 s8 temp_tmin[ADT7473_TEMP_COUNT];
163 /* This is called the !THERM limit in the datasheet */
164 s8 temp_tmax[ADT7473_TEMP_COUNT];
165
166 u16 fan[ADT7473_FAN_COUNT];
167 u16 fan_min[ADT7473_FAN_COUNT];
168
169 u8 pwm[ADT7473_PWM_COUNT];
170 u8 pwm_max[ADT7473_PWM_COUNT];
171 u8 pwm_min[ADT7473_PWM_COUNT];
172 u8 pwm_behavior[ADT7473_PWM_COUNT];
173
174 u8 temp_twos_complement;
175 u8 temp_offset;
176
177 u16 alarm;
178 u8 max_duty_at_overheat;
179};
180
181static int adt7473_attach_adapter(struct i2c_adapter *adapter);
182static int adt7473_detect(struct i2c_adapter *adapter, int address, int kind);
183static int adt7473_detach_client(struct i2c_client *client);
184
185static struct i2c_driver adt7473_driver = {
186 .driver = {
187 .name = "adt7473",
188 },
189 .attach_adapter = adt7473_attach_adapter,
190 .detach_client = adt7473_detach_client,
191};
192
193/*
194 * 16-bit registers on the ADT7473 are low-byte first. The data sheet says
195 * that the low byte must be read before the high byte.
196 */
197static inline int adt7473_read_word_data(struct i2c_client *client, u8 reg)
198{
199 u16 foo;
200 foo = i2c_smbus_read_byte_data(client, reg);
201 foo |= ((u16)i2c_smbus_read_byte_data(client, reg + 1) << 8);
202 return foo;
203}
204
205static inline int adt7473_write_word_data(struct i2c_client *client, u8 reg,
206 u16 value)
207{
208 return i2c_smbus_write_byte_data(client, reg, value & 0xFF)
209 && i2c_smbus_write_byte_data(client, reg + 1, value >> 8);
210}
211
212static void adt7473_init_client(struct i2c_client *client)
213{
214 int reg = i2c_smbus_read_byte_data(client, ADT7473_REG_CFG1);
215
216 if (!(reg & ADT7473_CFG1_READY)) {
217 dev_err(&client->dev, "Chip not ready.\n");
218 } else {
219 /* start monitoring */
220 i2c_smbus_write_byte_data(client, ADT7473_REG_CFG1,
221 reg | ADT7473_CFG1_START);
222 }
223}
224
225static struct adt7473_data *adt7473_update_device(struct device *dev)
226{
227 struct i2c_client *client = to_i2c_client(dev);
228 struct adt7473_data *data = i2c_get_clientdata(client);
229 unsigned long local_jiffies = jiffies;
230 u8 cfg;
231 int i;
232
233 mutex_lock(&data->lock);
234 if (time_before(local_jiffies, data->sensors_last_updated +
235 SENSOR_REFRESH_INTERVAL)
236 && data->sensors_valid)
237 goto no_sensor_update;
238
239 for (i = 0; i < ADT7473_VOLT_COUNT; i++)
240 data->volt[i] = i2c_smbus_read_byte_data(client,
241 ADT7473_REG_VOLT(i));
242
243 /* Determine temperature encoding */
244 cfg = i2c_smbus_read_byte_data(client, ADT7473_REG_CFG5);
245 data->temp_twos_complement = (cfg & ADT7473_CFG5_TEMP_TWOS);
246
247 /*
248 * What does this do? it implies a variable temperature sensor
249 * offset, but the datasheet doesn't say anything about this bit
250 * and other parts of the datasheet imply that "offset64" mode
251 * means that you shift temp values by -64 if the above bit was set.
252 */
253 data->temp_offset = (cfg & ADT7473_CFG5_TEMP_OFFSET);
254
255 for (i = 0; i < ADT7473_TEMP_COUNT; i++)
256 data->temp[i] = i2c_smbus_read_byte_data(client,
257 ADT7473_REG_TEMP(i));
258
259 for (i = 0; i < ADT7473_FAN_COUNT; i++)
260 data->fan[i] = adt7473_read_word_data(client,
261 ADT7473_REG_FAN(i));
262
263 for (i = 0; i < ADT7473_PWM_COUNT; i++)
264 data->pwm[i] = i2c_smbus_read_byte_data(client,
265 ADT7473_REG_PWM(i));
266
267 data->alarm = i2c_smbus_read_byte_data(client, ADT7473_REG_ALARM1);
268 if (data->alarm & ADT7473_OOL)
269 data->alarm |= ALARM2(i2c_smbus_read_byte_data(client,
270 ADT7473_REG_ALARM2));
271
272 data->sensors_last_updated = local_jiffies;
273 data->sensors_valid = 1;
274
275no_sensor_update:
276 if (time_before(local_jiffies, data->limits_last_updated +
277 LIMIT_REFRESH_INTERVAL)
278 && data->limits_valid)
279 goto out;
280
281 for (i = 0; i < ADT7473_VOLT_COUNT; i++) {
282 data->volt_min[i] = i2c_smbus_read_byte_data(client,
283 ADT7473_REG_VOLT_MIN(i));
284 data->volt_max[i] = i2c_smbus_read_byte_data(client,
285 ADT7473_REG_VOLT_MAX(i));
286 }
287
288 for (i = 0; i < ADT7473_TEMP_COUNT; i++) {
289 data->temp_min[i] = i2c_smbus_read_byte_data(client,
290 ADT7473_REG_TEMP_MIN(i));
291 data->temp_max[i] = i2c_smbus_read_byte_data(client,
292 ADT7473_REG_TEMP_MAX(i));
293 data->temp_tmin[i] = i2c_smbus_read_byte_data(client,
294 ADT7473_REG_TEMP_TMIN(i));
295 data->temp_tmax[i] = i2c_smbus_read_byte_data(client,
296 ADT7473_REG_TEMP_TMAX(i));
297 }
298
299 for (i = 0; i < ADT7473_FAN_COUNT; i++)
300 data->fan_min[i] = adt7473_read_word_data(client,
301 ADT7473_REG_FAN_MIN(i));
302
303 for (i = 0; i < ADT7473_PWM_COUNT; i++) {
304 data->pwm_max[i] = i2c_smbus_read_byte_data(client,
305 ADT7473_REG_PWM_MAX(i));
306 data->pwm_min[i] = i2c_smbus_read_byte_data(client,
307 ADT7473_REG_PWM_MIN(i));
308 data->pwm_behavior[i] = i2c_smbus_read_byte_data(client,
309 ADT7473_REG_PWM_BHVR(i));
310 }
311
312 data->limits_last_updated = local_jiffies;
313 data->limits_valid = 1;
314
315out:
316 mutex_unlock(&data->lock);
317 return data;
318}
319
320/*
321 * On this chip, voltages are given as a count of steps between a minimum
322 * and maximum voltage, not a direct voltage.
323 */
324static const int volt_convert_table[][2] = {
325 {2997, 3},
326 {4395, 4},
327};
328
329static int decode_volt(int volt_index, u8 raw)
330{
331 int cmax = volt_convert_table[volt_index][0];
332 int cmin = volt_convert_table[volt_index][1];
333 return ((raw * (cmax - cmin)) / 255) + cmin;
334}
335
336static u8 encode_volt(int volt_index, int cooked)
337{
338 int cmax = volt_convert_table[volt_index][0];
339 int cmin = volt_convert_table[volt_index][1];
340 u8 x;
341
342 if (cooked > cmax)
343 cooked = cmax;
344 else if (cooked < cmin)
345 cooked = cmin;
346
347 x = ((cooked - cmin) * 255) / (cmax - cmin);
348
349 return x;
350}
351
352static ssize_t show_volt_min(struct device *dev,
353 struct device_attribute *devattr,
354 char *buf)
355{
356 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
357 struct adt7473_data *data = adt7473_update_device(dev);
358 return sprintf(buf, "%d\n",
359 decode_volt(attr->index, data->volt_min[attr->index]));
360}
361
362static ssize_t set_volt_min(struct device *dev,
363 struct device_attribute *devattr,
364 const char *buf,
365 size_t count)
366{
367 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
368 struct i2c_client *client = to_i2c_client(dev);
369 struct adt7473_data *data = i2c_get_clientdata(client);
370 int volt = encode_volt(attr->index, simple_strtol(buf, NULL, 10));
371
372 mutex_lock(&data->lock);
373 data->volt_min[attr->index] = volt;
374 i2c_smbus_write_byte_data(client, ADT7473_REG_VOLT_MIN(attr->index),
375 volt);
376 mutex_unlock(&data->lock);
377
378 return count;
379}
380
381static ssize_t show_volt_max(struct device *dev,
382 struct device_attribute *devattr,
383 char *buf)
384{
385 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
386 struct adt7473_data *data = adt7473_update_device(dev);
387 return sprintf(buf, "%d\n",
388 decode_volt(attr->index, data->volt_max[attr->index]));
389}
390
391static ssize_t set_volt_max(struct device *dev,
392 struct device_attribute *devattr,
393 const char *buf,
394 size_t count)
395{
396 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
397 struct i2c_client *client = to_i2c_client(dev);
398 struct adt7473_data *data = i2c_get_clientdata(client);
399 int volt = encode_volt(attr->index, simple_strtol(buf, NULL, 10));
400
401 mutex_lock(&data->lock);
402 data->volt_max[attr->index] = volt;
403 i2c_smbus_write_byte_data(client, ADT7473_REG_VOLT_MAX(attr->index),
404 volt);
405 mutex_unlock(&data->lock);
406
407 return count;
408}
409
410static ssize_t show_volt(struct device *dev, struct device_attribute *devattr,
411 char *buf)
412{
413 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
414 struct adt7473_data *data = adt7473_update_device(dev);
415
416 return sprintf(buf, "%d\n",
417 decode_volt(attr->index, data->volt[attr->index]));
418}
419
420/*
421 * This chip can report temperature data either as a two's complement
422 * number in the range -128 to 127, or as an unsigned number that must
423 * be offset by 64.
424 */
425static int decode_temp(struct adt7473_data *data, u8 raw)
426{
427 if (data->temp_twos_complement)
428 return (s8)raw;
429 return raw - 64;
430}
431
432static u8 encode_temp(struct adt7473_data *data, int cooked)
433{
434 if (data->temp_twos_complement)
435 return (cooked & 0xFF);
436 return cooked + 64;
437}
438
439static ssize_t show_temp_min(struct device *dev,
440 struct device_attribute *devattr,
441 char *buf)
442{
443 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
444 struct adt7473_data *data = adt7473_update_device(dev);
445 return sprintf(buf, "%d\n",
446 1000 * decode_temp(data, data->temp_min[attr->index]));
447}
448
449static ssize_t set_temp_min(struct device *dev,
450 struct device_attribute *devattr,
451 const char *buf,
452 size_t count)
453{
454 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
455 struct i2c_client *client = to_i2c_client(dev);
456 struct adt7473_data *data = i2c_get_clientdata(client);
457 int temp = simple_strtol(buf, NULL, 10) / 1000;
458 temp = encode_temp(data, temp);
459
460 mutex_lock(&data->lock);
461 data->temp_min[attr->index] = temp;
462 i2c_smbus_write_byte_data(client, ADT7473_REG_TEMP_MIN(attr->index),
463 temp);
464 mutex_unlock(&data->lock);
465
466 return count;
467}
468
469static ssize_t show_temp_max(struct device *dev,
470 struct device_attribute *devattr,
471 char *buf)
472{
473 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
474 struct adt7473_data *data = adt7473_update_device(dev);
475 return sprintf(buf, "%d\n",
476 1000 * decode_temp(data, data->temp_max[attr->index]));
477}
478
479static ssize_t set_temp_max(struct device *dev,
480 struct device_attribute *devattr,
481 const char *buf,
482 size_t count)
483{
484 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
485 struct i2c_client *client = to_i2c_client(dev);
486 struct adt7473_data *data = i2c_get_clientdata(client);
487 int temp = simple_strtol(buf, NULL, 10) / 1000;
488 temp = encode_temp(data, temp);
489
490 mutex_lock(&data->lock);
491 data->temp_max[attr->index] = temp;
492 i2c_smbus_write_byte_data(client, ADT7473_REG_TEMP_MAX(attr->index),
493 temp);
494 mutex_unlock(&data->lock);
495
496 return count;
497}
498
499static ssize_t show_temp(struct device *dev, struct device_attribute *devattr,
500 char *buf)
501{
502 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
503 struct adt7473_data *data = adt7473_update_device(dev);
504 return sprintf(buf, "%d\n",
505 1000 * decode_temp(data, data->temp[attr->index]));
506}
507
508static ssize_t show_fan_min(struct device *dev,
509 struct device_attribute *devattr,
510 char *buf)
511{
512 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
513 struct adt7473_data *data = adt7473_update_device(dev);
514
515 if (FAN_DATA_VALID(data->fan_min[attr->index]))
516 return sprintf(buf, "%d\n",
517 FAN_PERIOD_TO_RPM(data->fan_min[attr->index]));
518 else
519 return sprintf(buf, "0\n");
520}
521
522static ssize_t set_fan_min(struct device *dev,
523 struct device_attribute *devattr,
524 const char *buf, size_t count)
525{
526 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
527 struct i2c_client *client = to_i2c_client(dev);
528 struct adt7473_data *data = i2c_get_clientdata(client);
529 int temp = simple_strtol(buf, NULL, 10);
530
531 if (!temp)
532 return -EINVAL;
533 temp = FAN_RPM_TO_PERIOD(temp);
534
535 mutex_lock(&data->lock);
536 data->fan_min[attr->index] = temp;
537 adt7473_write_word_data(client, ADT7473_REG_FAN_MIN(attr->index), temp);
538 mutex_unlock(&data->lock);
539
540 return count;
541}
542
543static ssize_t show_fan(struct device *dev, struct device_attribute *devattr,
544 char *buf)
545{
546 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
547 struct adt7473_data *data = adt7473_update_device(dev);
548
549 if (FAN_DATA_VALID(data->fan[attr->index]))
550 return sprintf(buf, "%d\n",
551 FAN_PERIOD_TO_RPM(data->fan[attr->index]));
552 else
553 return sprintf(buf, "0\n");
554}
555
556static ssize_t show_max_duty_at_crit(struct device *dev,
557 struct device_attribute *devattr,
558 char *buf)
559{
560 struct adt7473_data *data = adt7473_update_device(dev);
561 return sprintf(buf, "%d\n", data->max_duty_at_overheat);
562}
563
564static ssize_t set_max_duty_at_crit(struct device *dev,
565 struct device_attribute *devattr,
566 const char *buf,
567 size_t count)
568{
569 u8 reg;
570 struct i2c_client *client = to_i2c_client(dev);
571 struct adt7473_data *data = i2c_get_clientdata(client);
572 int temp = simple_strtol(buf, NULL, 10);
573 temp = temp && 0xFF;
574
575 mutex_lock(&data->lock);
576 data->max_duty_at_overheat = temp;
577 reg = i2c_smbus_read_byte_data(client, ADT7473_REG_CFG4);
578 if (temp)
579 reg |= ADT7473_CFG4_MAX_DUTY_AT_OVT;
580 else
581 reg &= ~ADT7473_CFG4_MAX_DUTY_AT_OVT;
582 i2c_smbus_write_byte_data(client, ADT7473_REG_CFG4, reg);
583 mutex_unlock(&data->lock);
584
585 return count;
586}
587
588static ssize_t show_pwm(struct device *dev, struct device_attribute *devattr,
589 char *buf)
590{
591 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
592 struct adt7473_data *data = adt7473_update_device(dev);
593 return sprintf(buf, "%d\n", data->pwm[attr->index]);
594}
595
596static ssize_t set_pwm(struct device *dev, struct device_attribute *devattr,
597 const char *buf, size_t count)
598{
599 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
600 struct i2c_client *client = to_i2c_client(dev);
601 struct adt7473_data *data = i2c_get_clientdata(client);
602 int temp = simple_strtol(buf, NULL, 10);
603
604 mutex_lock(&data->lock);
605 data->pwm[attr->index] = temp;
606 i2c_smbus_write_byte_data(client, ADT7473_REG_PWM(attr->index), temp);
607 mutex_unlock(&data->lock);
608
609 return count;
610}
611
612static ssize_t show_pwm_max(struct device *dev,
613 struct device_attribute *devattr,
614 char *buf)
615{
616 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
617 struct adt7473_data *data = adt7473_update_device(dev);
618 return sprintf(buf, "%d\n", data->pwm_max[attr->index]);
619}
620
621static ssize_t set_pwm_max(struct device *dev,
622 struct device_attribute *devattr,
623 const char *buf,
624 size_t count)
625{
626 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
627 struct i2c_client *client = to_i2c_client(dev);
628 struct adt7473_data *data = i2c_get_clientdata(client);
629 int temp = simple_strtol(buf, NULL, 10);
630
631 mutex_lock(&data->lock);
632 data->pwm_max[attr->index] = temp;
633 i2c_smbus_write_byte_data(client, ADT7473_REG_PWM_MAX(attr->index),
634 temp);
635 mutex_unlock(&data->lock);
636
637 return count;
638}
639
640static ssize_t show_pwm_min(struct device *dev,
641 struct device_attribute *devattr,
642 char *buf)
643{
644 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
645 struct adt7473_data *data = adt7473_update_device(dev);
646 return sprintf(buf, "%d\n", data->pwm_min[attr->index]);
647}
648
649static ssize_t set_pwm_min(struct device *dev,
650 struct device_attribute *devattr,
651 const char *buf,
652 size_t count)
653{
654 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
655 struct i2c_client *client = to_i2c_client(dev);
656 struct adt7473_data *data = i2c_get_clientdata(client);
657 int temp = simple_strtol(buf, NULL, 10);
658
659 mutex_lock(&data->lock);
660 data->pwm_min[attr->index] = temp;
661 i2c_smbus_write_byte_data(client, ADT7473_REG_PWM_MIN(attr->index),
662 temp);
663 mutex_unlock(&data->lock);
664
665 return count;
666}
667
668static ssize_t show_temp_tmax(struct device *dev,
669 struct device_attribute *devattr,
670 char *buf)
671{
672 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
673 struct adt7473_data *data = adt7473_update_device(dev);
674 return sprintf(buf, "%d\n",
675 1000 * decode_temp(data, data->temp_tmax[attr->index]));
676}
677
678static ssize_t set_temp_tmax(struct device *dev,
679 struct device_attribute *devattr,
680 const char *buf,
681 size_t count)
682{
683 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
684 struct i2c_client *client = to_i2c_client(dev);
685 struct adt7473_data *data = i2c_get_clientdata(client);
686 int temp = simple_strtol(buf, NULL, 10) / 1000;
687 temp = encode_temp(data, temp);
688
689 mutex_lock(&data->lock);
690 data->temp_tmax[attr->index] = temp;
691 i2c_smbus_write_byte_data(client, ADT7473_REG_TEMP_TMAX(attr->index),
692 temp);
693 mutex_unlock(&data->lock);
694
695 return count;
696}
697
698static ssize_t show_temp_tmin(struct device *dev,
699 struct device_attribute *devattr,
700 char *buf)
701{
702 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
703 struct adt7473_data *data = adt7473_update_device(dev);
704 return sprintf(buf, "%d\n",
705 1000 * decode_temp(data, data->temp_tmin[attr->index]));
706}
707
708static ssize_t set_temp_tmin(struct device *dev,
709 struct device_attribute *devattr,
710 const char *buf,
711 size_t count)
712{
713 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
714 struct i2c_client *client = to_i2c_client(dev);
715 struct adt7473_data *data = i2c_get_clientdata(client);
716 int temp = simple_strtol(buf, NULL, 10) / 1000;
717 temp = encode_temp(data, temp);
718
719 mutex_lock(&data->lock);
720 data->temp_tmin[attr->index] = temp;
721 i2c_smbus_write_byte_data(client, ADT7473_REG_TEMP_TMIN(attr->index),
722 temp);
723 mutex_unlock(&data->lock);
724
725 return count;
726}
727
728static ssize_t show_pwm_enable(struct device *dev,
729 struct device_attribute *devattr,
730 char *buf)
731{
732 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
733 struct adt7473_data *data = adt7473_update_device(dev);
734
735 switch (data->pwm_behavior[attr->index] >> ADT7473_PWM_BHVR_SHIFT) {
736 case 3:
737 return sprintf(buf, "0\n");
738 case 7:
739 return sprintf(buf, "1\n");
740 default:
741 return sprintf(buf, "2\n");
742 }
743}
744
745static ssize_t set_pwm_enable(struct device *dev,
746 struct device_attribute *devattr,
747 const char *buf,
748 size_t count)
749{
750 u8 reg;
751 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
752 struct i2c_client *client = to_i2c_client(dev);
753 struct adt7473_data *data = i2c_get_clientdata(client);
754 int temp = simple_strtol(buf, NULL, 10);
755
756 switch (temp) {
757 case 0:
758 temp = 3;
759 break;
760 case 1:
761 temp = 7;
762 break;
763 case 2:
764 /* Enter automatic mode with fans off */
765 temp = 4;
766 break;
767 default:
768 return -EINVAL;
769 }
770
771 mutex_lock(&data->lock);
772 reg = i2c_smbus_read_byte_data(client,
773 ADT7473_REG_PWM_BHVR(attr->index));
774 reg = (temp << ADT7473_PWM_BHVR_SHIFT) |
775 (reg & ~ADT7473_PWM_BHVR_MASK);
776 i2c_smbus_write_byte_data(client, ADT7473_REG_PWM_BHVR(attr->index),
777 reg);
778 data->pwm_behavior[attr->index] = reg;
779 mutex_unlock(&data->lock);
780
781 return count;
782}
783
784static ssize_t show_pwm_auto_temp(struct device *dev,
785 struct device_attribute *devattr,
786 char *buf)
787{
788 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
789 struct adt7473_data *data = adt7473_update_device(dev);
790 int bhvr = data->pwm_behavior[attr->index] >> ADT7473_PWM_BHVR_SHIFT;
791
792 switch (bhvr) {
793 case 3:
794 case 4:
795 case 7:
796 return sprintf(buf, "0\n");
797 case 0:
798 case 1:
799 case 5:
800 case 6:
801 return sprintf(buf, "%d\n", bhvr + 1);
802 case 2:
803 return sprintf(buf, "4\n");
804 }
805 /* shouldn't ever get here */
806 BUG();
807}
808
809static ssize_t set_pwm_auto_temp(struct device *dev,
810 struct device_attribute *devattr,
811 const char *buf,
812 size_t count)
813{
814 u8 reg;
815 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
816 struct i2c_client *client = to_i2c_client(dev);
817 struct adt7473_data *data = i2c_get_clientdata(client);
818 int temp = simple_strtol(buf, NULL, 10);
819
820 switch (temp) {
821 case 1:
822 case 2:
823 case 6:
824 case 7:
825 temp--;
826 break;
827 case 0:
828 temp = 4;
829 break;
830 default:
831 return -EINVAL;
832 }
833
834 mutex_lock(&data->lock);
835 reg = i2c_smbus_read_byte_data(client,
836 ADT7473_REG_PWM_BHVR(attr->index));
837 reg = (temp << ADT7473_PWM_BHVR_SHIFT) |
838 (reg & ~ADT7473_PWM_BHVR_MASK);
839 i2c_smbus_write_byte_data(client, ADT7473_REG_PWM_BHVR(attr->index),
840 reg);
841 data->pwm_behavior[attr->index] = reg;
842 mutex_unlock(&data->lock);
843
844 return count;
845}
846
847static ssize_t show_alarm(struct device *dev,
848 struct device_attribute *devattr,
849 char *buf)
850{
851 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
852 struct adt7473_data *data = adt7473_update_device(dev);
853
854 if (data->alarm & attr->index)
855 return sprintf(buf, "1\n");
856 else
857 return sprintf(buf, "0\n");
858}
859
860
861static SENSOR_DEVICE_ATTR(in1_max, S_IWUSR | S_IRUGO, show_volt_max,
862 set_volt_max, 0);
863static SENSOR_DEVICE_ATTR(in2_max, S_IWUSR | S_IRUGO, show_volt_max,
864 set_volt_max, 1);
865
866static SENSOR_DEVICE_ATTR(in1_min, S_IWUSR | S_IRUGO, show_volt_min,
867 set_volt_min, 0);
868static SENSOR_DEVICE_ATTR(in2_min, S_IWUSR | S_IRUGO, show_volt_min,
869 set_volt_min, 1);
870
871static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, show_volt, NULL, 0);
872static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, show_volt, NULL, 1);
873
874static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL,
875 ADT7473_VCCP_ALARM);
876static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL,
877 ADT7473_VCC_ALARM);
878
879static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_max,
880 set_temp_max, 0);
881static SENSOR_DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp_max,
882 set_temp_max, 1);
883static SENSOR_DEVICE_ATTR(temp3_max, S_IWUSR | S_IRUGO, show_temp_max,
884 set_temp_max, 2);
885
886static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp_min,
887 set_temp_min, 0);
888static SENSOR_DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_temp_min,
889 set_temp_min, 1);
890static SENSOR_DEVICE_ATTR(temp3_min, S_IWUSR | S_IRUGO, show_temp_min,
891 set_temp_min, 2);
892
893static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
894static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1);
895static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 2);
896
897static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL,
898 ADT7473_R1T_ALARM | ALARM2(ADT7473_R1T_SHORT));
899static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL,
900 ADT7473_LT_ALARM);
901static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL,
902 ADT7473_R2T_ALARM | ALARM2(ADT7473_R2T_SHORT));
903
904static SENSOR_DEVICE_ATTR(fan1_min, S_IWUSR | S_IRUGO, show_fan_min,
905 set_fan_min, 0);
906static SENSOR_DEVICE_ATTR(fan2_min, S_IWUSR | S_IRUGO, show_fan_min,
907 set_fan_min, 1);
908static SENSOR_DEVICE_ATTR(fan3_min, S_IWUSR | S_IRUGO, show_fan_min,
909 set_fan_min, 2);
910static SENSOR_DEVICE_ATTR(fan4_min, S_IWUSR | S_IRUGO, show_fan_min,
911 set_fan_min, 3);
912
913static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0);
914static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1);
915static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 2);
916static SENSOR_DEVICE_ATTR(fan4_input, S_IRUGO, show_fan, NULL, 3);
917
918static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL,
919 ALARM2(ADT7473_FAN1_ALARM));
920static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL,
921 ALARM2(ADT7473_FAN2_ALARM));
922static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL,
923 ALARM2(ADT7473_FAN3_ALARM));
924static SENSOR_DEVICE_ATTR(fan4_alarm, S_IRUGO, show_alarm, NULL,
925 ALARM2(ADT7473_FAN4_ALARM));
926
927static SENSOR_DEVICE_ATTR(pwm_use_point2_pwm_at_crit, S_IWUSR | S_IRUGO,
928 show_max_duty_at_crit, set_max_duty_at_crit, 0);
929
930static SENSOR_DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 0);
931static SENSOR_DEVICE_ATTR(pwm2, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 1);
932static SENSOR_DEVICE_ATTR(pwm3, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 2);
933
934static SENSOR_DEVICE_ATTR(pwm1_auto_point1_pwm, S_IWUSR | S_IRUGO,
935 show_pwm_min, set_pwm_min, 0);
936static SENSOR_DEVICE_ATTR(pwm2_auto_point1_pwm, S_IWUSR | S_IRUGO,
937 show_pwm_min, set_pwm_min, 1);
938static SENSOR_DEVICE_ATTR(pwm3_auto_point1_pwm, S_IWUSR | S_IRUGO,
939 show_pwm_min, set_pwm_min, 2);
940
941static SENSOR_DEVICE_ATTR(pwm1_auto_point2_pwm, S_IWUSR | S_IRUGO,
942 show_pwm_max, set_pwm_max, 0);
943static SENSOR_DEVICE_ATTR(pwm2_auto_point2_pwm, S_IWUSR | S_IRUGO,
944 show_pwm_max, set_pwm_max, 1);
945static SENSOR_DEVICE_ATTR(pwm3_auto_point2_pwm, S_IWUSR | S_IRUGO,
946 show_pwm_max, set_pwm_max, 2);
947
948static SENSOR_DEVICE_ATTR(temp1_auto_point1_temp, S_IWUSR | S_IRUGO,
949 show_temp_tmin, set_temp_tmin, 0);
950static SENSOR_DEVICE_ATTR(temp2_auto_point1_temp, S_IWUSR | S_IRUGO,
951 show_temp_tmin, set_temp_tmin, 1);
952static SENSOR_DEVICE_ATTR(temp3_auto_point1_temp, S_IWUSR | S_IRUGO,
953 show_temp_tmin, set_temp_tmin, 2);
954
955static SENSOR_DEVICE_ATTR(temp1_auto_point2_temp, S_IWUSR | S_IRUGO,
956 show_temp_tmax, set_temp_tmax, 0);
957static SENSOR_DEVICE_ATTR(temp2_auto_point2_temp, S_IWUSR | S_IRUGO,
958 show_temp_tmax, set_temp_tmax, 1);
959static SENSOR_DEVICE_ATTR(temp3_auto_point2_temp, S_IWUSR | S_IRUGO,
960 show_temp_tmax, set_temp_tmax, 2);
961
962static SENSOR_DEVICE_ATTR(pwm1_enable, S_IWUSR | S_IRUGO, show_pwm_enable,
963 set_pwm_enable, 0);
964static SENSOR_DEVICE_ATTR(pwm2_enable, S_IWUSR | S_IRUGO, show_pwm_enable,
965 set_pwm_enable, 1);
966static SENSOR_DEVICE_ATTR(pwm3_enable, S_IWUSR | S_IRUGO, show_pwm_enable,
967 set_pwm_enable, 2);
968
969static SENSOR_DEVICE_ATTR(pwm1_auto_channels_temp, S_IWUSR | S_IRUGO,
970 show_pwm_auto_temp, set_pwm_auto_temp, 0);
971static SENSOR_DEVICE_ATTR(pwm2_auto_channels_temp, S_IWUSR | S_IRUGO,
972 show_pwm_auto_temp, set_pwm_auto_temp, 1);
973static SENSOR_DEVICE_ATTR(pwm3_auto_channels_temp, S_IWUSR | S_IRUGO,
974 show_pwm_auto_temp, set_pwm_auto_temp, 2);
975
976static struct attribute *adt7473_attr[] =
977{
978 &sensor_dev_attr_in1_max.dev_attr.attr,
979 &sensor_dev_attr_in2_max.dev_attr.attr,
980 &sensor_dev_attr_in1_min.dev_attr.attr,
981 &sensor_dev_attr_in2_min.dev_attr.attr,
982 &sensor_dev_attr_in1_input.dev_attr.attr,
983 &sensor_dev_attr_in2_input.dev_attr.attr,
984 &sensor_dev_attr_in1_alarm.dev_attr.attr,
985 &sensor_dev_attr_in2_alarm.dev_attr.attr,
986
987 &sensor_dev_attr_temp1_max.dev_attr.attr,
988 &sensor_dev_attr_temp2_max.dev_attr.attr,
989 &sensor_dev_attr_temp3_max.dev_attr.attr,
990 &sensor_dev_attr_temp1_min.dev_attr.attr,
991 &sensor_dev_attr_temp2_min.dev_attr.attr,
992 &sensor_dev_attr_temp3_min.dev_attr.attr,
993 &sensor_dev_attr_temp1_input.dev_attr.attr,
994 &sensor_dev_attr_temp2_input.dev_attr.attr,
995 &sensor_dev_attr_temp3_input.dev_attr.attr,
996 &sensor_dev_attr_temp1_alarm.dev_attr.attr,
997 &sensor_dev_attr_temp2_alarm.dev_attr.attr,
998 &sensor_dev_attr_temp3_alarm.dev_attr.attr,
999 &sensor_dev_attr_temp1_auto_point1_temp.dev_attr.attr,
1000 &sensor_dev_attr_temp2_auto_point1_temp.dev_attr.attr,
1001 &sensor_dev_attr_temp3_auto_point1_temp.dev_attr.attr,
1002 &sensor_dev_attr_temp1_auto_point2_temp.dev_attr.attr,
1003 &sensor_dev_attr_temp2_auto_point2_temp.dev_attr.attr,
1004 &sensor_dev_attr_temp3_auto_point2_temp.dev_attr.attr,
1005
1006 &sensor_dev_attr_fan1_min.dev_attr.attr,
1007 &sensor_dev_attr_fan2_min.dev_attr.attr,
1008 &sensor_dev_attr_fan3_min.dev_attr.attr,
1009 &sensor_dev_attr_fan4_min.dev_attr.attr,
1010 &sensor_dev_attr_fan1_input.dev_attr.attr,
1011 &sensor_dev_attr_fan2_input.dev_attr.attr,
1012 &sensor_dev_attr_fan3_input.dev_attr.attr,
1013 &sensor_dev_attr_fan4_input.dev_attr.attr,
1014 &sensor_dev_attr_fan1_alarm.dev_attr.attr,
1015 &sensor_dev_attr_fan2_alarm.dev_attr.attr,
1016 &sensor_dev_attr_fan3_alarm.dev_attr.attr,
1017 &sensor_dev_attr_fan4_alarm.dev_attr.attr,
1018
1019 &sensor_dev_attr_pwm_use_point2_pwm_at_crit.dev_attr.attr,
1020
1021 &sensor_dev_attr_pwm1.dev_attr.attr,
1022 &sensor_dev_attr_pwm2.dev_attr.attr,
1023 &sensor_dev_attr_pwm3.dev_attr.attr,
1024 &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr,
1025 &sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr,
1026 &sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr,
1027 &sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr,
1028 &sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr,
1029 &sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr,
1030
1031 &sensor_dev_attr_pwm1_enable.dev_attr.attr,
1032 &sensor_dev_attr_pwm2_enable.dev_attr.attr,
1033 &sensor_dev_attr_pwm3_enable.dev_attr.attr,
1034 &sensor_dev_attr_pwm1_auto_channels_temp.dev_attr.attr,
1035 &sensor_dev_attr_pwm2_auto_channels_temp.dev_attr.attr,
1036 &sensor_dev_attr_pwm3_auto_channels_temp.dev_attr.attr,
1037
1038 NULL
1039};
1040
1041static int adt7473_attach_adapter(struct i2c_adapter *adapter)
1042{
1043 if (!(adapter->class & I2C_CLASS_HWMON))
1044 return 0;
1045 return i2c_probe(adapter, &addr_data, adt7473_detect);
1046}
1047
1048static int adt7473_detect(struct i2c_adapter *adapter, int address, int kind)
1049{
1050 struct i2c_client *client;
1051 struct adt7473_data *data;
1052 int err = 0;
1053
1054 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
1055 goto exit;
1056
1057 data = kzalloc(sizeof(struct adt7473_data), GFP_KERNEL);
1058 if (!data) {
1059 err = -ENOMEM;
1060 goto exit;
1061 }
1062
1063 client = &data->client;
1064 client->addr = address;
1065 client->adapter = adapter;
1066 client->driver = &adt7473_driver;
1067
1068 i2c_set_clientdata(client, data);
1069
1070 mutex_init(&data->lock);
1071
1072 if (kind <= 0) {
1073 int vendor, device, revision;
1074
1075 vendor = i2c_smbus_read_byte_data(client, ADT7473_REG_VENDOR);
1076 if (vendor != ADT7473_VENDOR) {
1077 err = -ENODEV;
1078 goto exit_free;
1079 }
1080
1081 device = i2c_smbus_read_byte_data(client, ADT7473_REG_DEVICE);
1082 if (device != ADT7473_DEVICE) {
1083 err = -ENODEV;
1084 goto exit_free;
1085 }
1086
1087 revision = i2c_smbus_read_byte_data(client,
1088 ADT7473_REG_REVISION);
1089 if (revision != ADT7473_REV_68 && revision != ADT7473_REV_69) {
1090 err = -ENODEV;
1091 goto exit_free;
1092 }
1093 } else
1094 dev_dbg(&adapter->dev, "detection forced\n");
1095
1096 strlcpy(client->name, "adt7473", I2C_NAME_SIZE);
1097
1098 err = i2c_attach_client(client);
1099 if (err)
1100 goto exit_free;
1101
1102 dev_info(&client->dev, "%s chip found\n", client->name);
1103
1104 /* Initialize the ADT7473 chip */
1105 adt7473_init_client(client);
1106
1107 /* Register sysfs hooks */
1108 data->attrs.attrs = adt7473_attr;
1109 err = sysfs_create_group(&client->dev.kobj, &data->attrs);
1110 if (err)
1111 goto exit_detach;
1112
1113 data->hwmon_dev = hwmon_device_register(&client->dev);
1114 if (IS_ERR(data->hwmon_dev)) {
1115 err = PTR_ERR(data->hwmon_dev);
1116 goto exit_remove;
1117 }
1118
1119 return 0;
1120
1121exit_remove:
1122 sysfs_remove_group(&client->dev.kobj, &data->attrs);
1123exit_detach:
1124 i2c_detach_client(client);
1125exit_free:
1126 kfree(data);
1127exit:
1128 return err;
1129}
1130
1131static int adt7473_detach_client(struct i2c_client *client)
1132{
1133 struct adt7473_data *data = i2c_get_clientdata(client);
1134
1135 hwmon_device_unregister(data->hwmon_dev);
1136 sysfs_remove_group(&client->dev.kobj, &data->attrs);
1137 i2c_detach_client(client);
1138 kfree(data);
1139 return 0;
1140}
1141
1142static int __init adt7473_init(void)
1143{
1144 return i2c_add_driver(&adt7473_driver);
1145}
1146
1147static void __exit adt7473_exit(void)
1148{
1149 i2c_del_driver(&adt7473_driver);
1150}
1151
1152MODULE_AUTHOR("Darrick J. Wong <djwong@us.ibm.com>");
1153MODULE_DESCRIPTION("ADT7473 driver");
1154MODULE_LICENSE("GPL");
1155
1156module_init(adt7473_init);
1157module_exit(adt7473_exit);
generated by cgit v1.2.2 (git 2.25.0) at 2024-09-29 14:23:09 -0400