2 files changed, 23 insertions, 0 deletions

diff --git a/Documentation/i2c/busses/i2c-parport b/Documentation/i2c/busses/i2c-parport
index 77b995dfca22..dceaba1ad930 100644
--- a/Documentation/i2c/busses/i2c-parport
+++ b/Documentation/i2c/busses/i2c-parport
@@ -19,6 +19,7 @@ It currently supports the following devices:
  * (type=4) Analog Devices ADM1032 evaluation board
  * (type=5) Analog Devices evaluation boards: ADM1025, ADM1030, ADM1031
  * (type=6) Barco LPT->DVI (K5800236) adapter
+ * (type=7) One For All JP1 parallel port adapter
 
 These devices use different pinout configurations, so you have to tell
 the driver what you have, using the type module parameter. There is no
@@ -157,3 +158,17 @@ many more, using /dev/velleman.
   http://home.wanadoo.nl/hihihi/libk8005.htm
   http://struyve.mine.nu:8080/index.php?block=k8000
   http://sourceforge.net/projects/libk8005/
+
+
+One For All JP1 parallel port adapter
+-------------------------------------
+
+The JP1 project revolves around a set of remote controls which expose
+the I2C bus their internal configuration EEPROM lives on via a 6 pin
+jumper in the battery compartment. More details can be found at:
+
+http://www.hifi-remote.com/jp1/
+
+Details of the simple parallel port hardware can be found at:
+
+http://www.hifi-remote.com/jp1/hardware.shtml
diff --git a/drivers/i2c/busses/i2c-parport.h b/drivers/i2c/busses/i2c-parport.h
index 9ddd816d5d0f..ed69d846cb95 100644
--- a/drivers/i2c/busses/i2c-parport.h
+++ b/drivers/i2c/busses/i2c-parport.h
@@ -88,6 +88,13 @@ static struct adapter_parm adapter_parm[] = {
                 .getscl = { 0x40, STAT, 0 },
                 .init   = { 0xfc, DATA, 0 },
         },
+        /* type 7: One For All JP1 parallel port adapter */
+        {
+                .setsda = { 0x01, DATA, 0 },
+                .setscl = { 0x02, DATA, 0 },
+                .getsda = { 0x80, STAT, 1 },
+                .init   = { 0x04, DATA, 1 },
+        },
 };
 
 static int type = -1;
@@ -101,4 +108,5 @@ MODULE_PARM_DESC(type,
         " 4 = ADM1032 evaluation board\n"
         " 5 = ADM1025, ADM1030 and ADM1031 evaluation boards\n"
         " 6 = Barco LPT->DVI (K5800236) adapter\n"
+        " 7 = One For All JP1 parallel port adapter\n"
 );