diff options
-rw-r--r-- | arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h | 42 | ||||
-rw-r--r-- | drivers/input/keyboard/Kconfig | 10 | ||||
-rw-r--r-- | drivers/input/keyboard/Makefile | 1 | ||||
-rw-r--r-- | drivers/input/keyboard/ep93xx_keypad.c | 470 |
4 files changed, 523 insertions, 0 deletions
diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h b/arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h new file mode 100644 index 000000000000..83f31cd0a274 --- /dev/null +++ b/arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h | |||
@@ -0,0 +1,42 @@ | |||
1 | /* | ||
2 | * arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h | ||
3 | */ | ||
4 | |||
5 | #ifndef __ASM_ARCH_EP93XX_KEYPAD_H | ||
6 | #define __ASM_ARCH_EP93XX_KEYPAD_H | ||
7 | |||
8 | #define MAX_MATRIX_KEY_ROWS (8) | ||
9 | #define MAX_MATRIX_KEY_COLS (8) | ||
10 | |||
11 | /* flags for the ep93xx_keypad driver */ | ||
12 | #define EP93XX_KEYPAD_DISABLE_3_KEY (1<<0) /* disable 3-key reset */ | ||
13 | #define EP93XX_KEYPAD_DIAG_MODE (1<<1) /* diagnostic mode */ | ||
14 | #define EP93XX_KEYPAD_BACK_DRIVE (1<<2) /* back driving mode */ | ||
15 | #define EP93XX_KEYPAD_TEST_MODE (1<<3) /* scan only column 0 */ | ||
16 | #define EP93XX_KEYPAD_KDIV (1<<4) /* 1/4 clock or 1/16 clock */ | ||
17 | #define EP93XX_KEYPAD_AUTOREPEAT (1<<5) /* enable key autorepeat */ | ||
18 | |||
19 | /** | ||
20 | * struct ep93xx_keypad_platform_data - platform specific device structure | ||
21 | * @matrix_key_rows: number of rows in the keypad matrix | ||
22 | * @matrix_key_cols: number of columns in the keypad matrix | ||
23 | * @matrix_key_map: array of keycodes defining the keypad matrix | ||
24 | * @matrix_key_map_size: ARRAY_SIZE(matrix_key_map) | ||
25 | * @debounce: debounce start count; terminal count is 0xff | ||
26 | * @prescale: row/column counter pre-scaler load value | ||
27 | * @flags: see above | ||
28 | */ | ||
29 | struct ep93xx_keypad_platform_data { | ||
30 | unsigned int matrix_key_rows; | ||
31 | unsigned int matrix_key_cols; | ||
32 | unsigned int *matrix_key_map; | ||
33 | int matrix_key_map_size; | ||
34 | unsigned int debounce; | ||
35 | unsigned int prescale; | ||
36 | unsigned int flags; | ||
37 | }; | ||
38 | |||
39 | /* macro for creating the matrix_key_map table */ | ||
40 | #define KEY(row, col, val) (((row) << 28) | ((col) << 24) | (val)) | ||
41 | |||
42 | #endif /* __ASM_ARCH_EP93XX_KEYPAD_H */ | ||
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index 35561689ff38..76407df17cd7 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig | |||
@@ -332,4 +332,14 @@ config KEYBOARD_SH_KEYSC | |||
332 | 332 | ||
333 | To compile this driver as a module, choose M here: the | 333 | To compile this driver as a module, choose M here: the |
334 | module will be called sh_keysc. | 334 | module will be called sh_keysc. |
335 | + | ||
336 | config KEYBOARD_EP93XX | ||
337 | tristate "EP93xx Matrix Keypad support" | ||
338 | depends on ARCH_EP93XX | ||
339 | help | ||
340 | Say Y here to enable the matrix keypad on the Cirrus EP93XX. | ||
341 | |||
342 | To compile this driver as a module, choose M here: the | ||
343 | module will be called ep93xx_keypad. | ||
344 | |||
335 | endif | 345 | endif |
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile index 36351e1190f9..13ba9c954938 100644 --- a/drivers/input/keyboard/Makefile +++ b/drivers/input/keyboard/Makefile | |||
@@ -28,3 +28,4 @@ obj-$(CONFIG_KEYBOARD_HP7XX) += jornada720_kbd.o | |||
28 | obj-$(CONFIG_KEYBOARD_MAPLE) += maple_keyb.o | 28 | obj-$(CONFIG_KEYBOARD_MAPLE) += maple_keyb.o |
29 | obj-$(CONFIG_KEYBOARD_BFIN) += bf54x-keys.o | 29 | obj-$(CONFIG_KEYBOARD_BFIN) += bf54x-keys.o |
30 | obj-$(CONFIG_KEYBOARD_SH_KEYSC) += sh_keysc.o | 30 | obj-$(CONFIG_KEYBOARD_SH_KEYSC) += sh_keysc.o |
31 | obj-$(CONFIG_KEYBOARD_EP93XX) += ep93xx_keypad.o | ||
diff --git a/drivers/input/keyboard/ep93xx_keypad.c b/drivers/input/keyboard/ep93xx_keypad.c new file mode 100644 index 000000000000..181d30e3018e --- /dev/null +++ b/drivers/input/keyboard/ep93xx_keypad.c | |||
@@ -0,0 +1,470 @@ | |||
1 | /* | ||
2 | * Driver for the Cirrus EP93xx matrix keypad controller. | ||
3 | * | ||
4 | * Copyright (c) 2008 H Hartley Sweeten <hsweeten@visionengravers.com> | ||
5 | * | ||
6 | * Based on the pxa27x matrix keypad controller by Rodolfo Giometti. | ||
7 | * | ||
8 | * This program is free software; you can redistribute it and/or modify | ||
9 | * it under the terms of the GNU General Public License version 2 as | ||
10 | * published by the Free Software Foundation. | ||
11 | * | ||
12 | * NOTE: | ||
13 | * | ||
14 | * The 3-key reset is triggered by pressing the 3 keys in | ||
15 | * Row 0, Columns 2, 4, and 7 at the same time. This action can | ||
16 | * be disabled by setting the EP93XX_KEYPAD_DISABLE_3_KEY flag. | ||
17 | * | ||
18 | * Normal operation for the matrix does not autorepeat the key press. | ||
19 | * This action can be enabled by setting the EP93XX_KEYPAD_AUTOREPEAT | ||
20 | * flag. | ||
21 | */ | ||
22 | |||
23 | #include <linux/platform_device.h> | ||
24 | #include <linux/interrupt.h> | ||
25 | #include <linux/input.h> | ||
26 | #include <linux/clk.h> | ||
27 | |||
28 | #include <mach/hardware.h> | ||
29 | #include <mach/gpio.h> | ||
30 | #include <mach/ep93xx_keypad.h> | ||
31 | |||
32 | /* | ||
33 | * Keypad Interface Register offsets | ||
34 | */ | ||
35 | #define KEY_INIT 0x00 /* Key Scan Initialization register */ | ||
36 | #define KEY_DIAG 0x04 /* Key Scan Diagnostic register */ | ||
37 | #define KEY_REG 0x08 /* Key Value Capture register */ | ||
38 | |||
39 | /* Key Scan Initialization Register bit defines */ | ||
40 | #define KEY_INIT_DBNC_MASK (0x00ff0000) | ||
41 | #define KEY_INIT_DBNC_SHIFT (16) | ||
42 | #define KEY_INIT_DIS3KY (1<<15) | ||
43 | #define KEY_INIT_DIAG (1<<14) | ||
44 | #define KEY_INIT_BACK (1<<13) | ||
45 | #define KEY_INIT_T2 (1<<12) | ||
46 | #define KEY_INIT_PRSCL_MASK (0x000003ff) | ||
47 | #define KEY_INIT_PRSCL_SHIFT (0) | ||
48 | |||
49 | /* Key Scan Diagnostic Register bit defines */ | ||
50 | #define KEY_DIAG_MASK (0x0000003f) | ||
51 | #define KEY_DIAG_SHIFT (0) | ||
52 | |||
53 | /* Key Value Capture Register bit defines */ | ||
54 | #define KEY_REG_K (1<<15) | ||
55 | #define KEY_REG_INT (1<<14) | ||
56 | #define KEY_REG_2KEYS (1<<13) | ||
57 | #define KEY_REG_1KEY (1<<12) | ||
58 | #define KEY_REG_KEY2_MASK (0x00000fc0) | ||
59 | #define KEY_REG_KEY2_SHIFT (6) | ||
60 | #define KEY_REG_KEY1_MASK (0x0000003f) | ||
61 | #define KEY_REG_KEY1_SHIFT (0) | ||
62 | |||
63 | #define keypad_readl(off) __raw_readl(keypad->mmio_base + (off)) | ||
64 | #define keypad_writel(v, off) __raw_writel((v), keypad->mmio_base + (off)) | ||
65 | |||
66 | #define MAX_MATRIX_KEY_NUM (MAX_MATRIX_KEY_ROWS * MAX_MATRIX_KEY_COLS) | ||
67 | |||
68 | struct ep93xx_keypad { | ||
69 | struct ep93xx_keypad_platform_data *pdata; | ||
70 | |||
71 | struct clk *clk; | ||
72 | struct input_dev *input_dev; | ||
73 | void __iomem *mmio_base; | ||
74 | |||
75 | int irq; | ||
76 | int enabled; | ||
77 | |||
78 | int key1; | ||
79 | int key2; | ||
80 | |||
81 | unsigned int matrix_keycodes[MAX_MATRIX_KEY_NUM]; | ||
82 | }; | ||
83 | |||
84 | static void ep93xx_keypad_build_keycode(struct ep93xx_keypad *keypad) | ||
85 | { | ||
86 | struct ep93xx_keypad_platform_data *pdata = keypad->pdata; | ||
87 | struct input_dev *input_dev = keypad->input_dev; | ||
88 | int i; | ||
89 | |||
90 | for (i = 0; i < pdata->matrix_key_map_size; i++) { | ||
91 | unsigned int key = pdata->matrix_key_map[i]; | ||
92 | int row = (key >> 28) & 0xf; | ||
93 | int col = (key >> 24) & 0xf; | ||
94 | int code = key & 0xffffff; | ||
95 | |||
96 | keypad->matrix_keycodes[(row << 3) + col] = code; | ||
97 | __set_bit(code, input_dev->keybit); | ||
98 | } | ||
99 | } | ||
100 | |||
101 | static irqreturn_t ep93xx_keypad_irq_handler(int irq, void *dev_id) | ||
102 | { | ||
103 | struct ep93xx_keypad *keypad = dev_id; | ||
104 | struct input_dev *input_dev = keypad->input_dev; | ||
105 | unsigned int status = keypad_readl(KEY_REG); | ||
106 | int keycode, key1, key2; | ||
107 | |||
108 | keycode = (status & KEY_REG_KEY1_MASK) >> KEY_REG_KEY1_SHIFT; | ||
109 | key1 = keypad->matrix_keycodes[keycode]; | ||
110 | |||
111 | keycode = (status & KEY_REG_KEY2_MASK) >> KEY_REG_KEY2_SHIFT; | ||
112 | key2 = keypad->matrix_keycodes[keycode]; | ||
113 | |||
114 | if (status & KEY_REG_2KEYS) { | ||
115 | if (keypad->key1 && key1 != keypad->key1 && key2 != keypad->key1) | ||
116 | input_report_key(input_dev, keypad->key1, 0); | ||
117 | |||
118 | if (keypad->key2 && key1 != keypad->key2 && key2 != keypad->key2) | ||
119 | input_report_key(input_dev, keypad->key2, 0); | ||
120 | |||
121 | input_report_key(input_dev, key1, 1); | ||
122 | input_report_key(input_dev, key2, 1); | ||
123 | |||
124 | keypad->key1 = key1; | ||
125 | keypad->key2 = key2; | ||
126 | |||
127 | } else if (status & KEY_REG_1KEY) { | ||
128 | if (keypad->key1 && key1 != keypad->key1) | ||
129 | input_report_key(input_dev, keypad->key1, 0); | ||
130 | |||
131 | if (keypad->key2 && key1 != keypad->key2) | ||
132 | input_report_key(input_dev, keypad->key2, 0); | ||
133 | |||
134 | input_report_key(input_dev, key1, 1); | ||
135 | |||
136 | keypad->key1 = key1; | ||
137 | keypad->key2 = 0; | ||
138 | |||
139 | } else { | ||
140 | input_report_key(input_dev, keypad->key1, 0); | ||
141 | input_report_key(input_dev, keypad->key2, 0); | ||
142 | |||
143 | keypad->key1 = keypad->key2 = 0; | ||
144 | } | ||
145 | input_sync(input_dev); | ||
146 | |||
147 | return IRQ_HANDLED; | ||
148 | } | ||
149 | |||
150 | static void ep93xx_keypad_config(struct ep93xx_keypad *keypad) | ||
151 | { | ||
152 | struct ep93xx_keypad_platform_data *pdata = keypad->pdata; | ||
153 | unsigned int val = 0; | ||
154 | |||
155 | clk_set_rate(keypad->clk, pdata->flags & EP93XX_KEYPAD_KDIV); | ||
156 | |||
157 | if (pdata->flags & EP93XX_KEYPAD_DISABLE_3_KEY) | ||
158 | val |= KEY_INIT_DIS3KY; | ||
159 | if (pdata->flags & EP93XX_KEYPAD_DIAG_MODE) | ||
160 | val |= KEY_INIT_DIAG; | ||
161 | if (pdata->flags & EP93XX_KEYPAD_BACK_DRIVE) | ||
162 | val |= KEY_INIT_BACK; | ||
163 | if (pdata->flags & EP93XX_KEYPAD_TEST_MODE) | ||
164 | val |= KEY_INIT_T2; | ||
165 | |||
166 | val |= ((pdata->debounce << KEY_INIT_DBNC_SHIFT) & KEY_INIT_DBNC_MASK); | ||
167 | |||
168 | val |= ((pdata->prescale << KEY_INIT_PRSCL_SHIFT) & KEY_INIT_PRSCL_MASK); | ||
169 | |||
170 | keypad_writel(val, KEY_INIT); | ||
171 | } | ||
172 | |||
173 | static int ep93xx_keypad_open(struct input_dev *pdev) | ||
174 | { | ||
175 | struct ep93xx_keypad *keypad = input_get_drvdata(pdev); | ||
176 | |||
177 | if (!keypad->enabled) { | ||
178 | ep93xx_keypad_config(keypad); | ||
179 | clk_enable(keypad->clk); | ||
180 | keypad->enabled = 1; | ||
181 | } | ||
182 | |||
183 | return 0; | ||
184 | } | ||
185 | |||
186 | static void ep93xx_keypad_close(struct input_dev *pdev) | ||
187 | { | ||
188 | struct ep93xx_keypad *keypad = input_get_drvdata(pdev); | ||
189 | |||
190 | if (keypad->enabled) { | ||
191 | clk_disable(keypad->clk); | ||
192 | keypad->enabled = 0; | ||
193 | } | ||
194 | } | ||
195 | |||
196 | |||
197 | #ifdef CONFIG_PM | ||
198 | /* | ||
199 | * NOTE: I don't know if this is correct, or will work on the ep93xx. | ||
200 | * | ||
201 | * None of the existing ep93xx drivers have power management support. | ||
202 | * But, this is basically what the pxa27x_keypad driver does. | ||
203 | */ | ||
204 | static int ep93xx_keypad_suspend(struct platform_device *pdev, | ||
205 | pm_message_t state) | ||
206 | { | ||
207 | struct ep93xx_keypad *keypad = platform_get_drvdata(pdev); | ||
208 | struct input_dev *input_dev = keypad->input_dev; | ||
209 | |||
210 | mutex_lock(&input_dev->mutex); | ||
211 | |||
212 | if (keypad->enabled) { | ||
213 | clk_disable(keypad->clk); | ||
214 | keypad->enabled = 0; | ||
215 | } | ||
216 | |||
217 | mutex_unlock(&input_dev->mutex); | ||
218 | |||
219 | if (device_may_wakeup(&pdev->dev)) | ||
220 | enable_irq_wake(keypad->irq); | ||
221 | |||
222 | return 0; | ||
223 | } | ||
224 | |||
225 | static int ep93xx_keypad_resume(struct platform_device *pdev) | ||
226 | { | ||
227 | struct ep93xx_keypad *keypad = platform_get_drvdata(pdev); | ||
228 | struct input_dev *input_dev = keypad->input_dev; | ||
229 | |||
230 | if (device_may_wakeup(&pdev->dev)) | ||
231 | disable_irq_wake(keypad->irq); | ||
232 | |||
233 | mutex_lock(&input_dev->mutex); | ||
234 | |||
235 | if (input_dev->users) { | ||
236 | if (!keypad->enabled) { | ||
237 | ep93xx_keypad_config(keypad); | ||
238 | clk_enable(keypad->clk); | ||
239 | keypad->enabled = 1; | ||
240 | } | ||
241 | } | ||
242 | |||
243 | mutex_unlock(&input_dev->mutex); | ||
244 | |||
245 | return 0; | ||
246 | } | ||
247 | #else /* !CONFIG_PM */ | ||
248 | #define ep93xx_keypad_suspend NULL | ||
249 | #define ep93xx_keypad_resume NULL | ||
250 | #endif /* !CONFIG_PM */ | ||
251 | |||
252 | static int __devinit ep93xx_keypad_probe(struct platform_device *pdev) | ||
253 | { | ||
254 | struct ep93xx_keypad *keypad; | ||
255 | struct ep93xx_keypad_platform_data *pdata = pdev->dev.platform_data; | ||
256 | struct input_dev *input_dev; | ||
257 | struct resource *res; | ||
258 | int irq, err, i, gpio; | ||
259 | |||
260 | if (!pdata || | ||
261 | !pdata->matrix_key_rows || | ||
262 | pdata->matrix_key_rows > MAX_MATRIX_KEY_ROWS || | ||
263 | !pdata->matrix_key_cols || | ||
264 | pdata->matrix_key_cols > MAX_MATRIX_KEY_COLS) { | ||
265 | dev_err(&pdev->dev, "invalid or missing platform data\n"); | ||
266 | return -EINVAL; | ||
267 | } | ||
268 | |||
269 | keypad = kzalloc(sizeof(struct ep93xx_keypad), GFP_KERNEL); | ||
270 | if (!keypad) { | ||
271 | dev_err(&pdev->dev, "failed to allocate driver data\n"); | ||
272 | return -ENOMEM; | ||
273 | } | ||
274 | |||
275 | keypad->pdata = pdata; | ||
276 | |||
277 | irq = platform_get_irq(pdev, 0); | ||
278 | if (irq < 0) { | ||
279 | dev_err(&pdev->dev, "failed to get keypad irq\n"); | ||
280 | err = -ENXIO; | ||
281 | goto failed_free; | ||
282 | } | ||
283 | |||
284 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | ||
285 | if (!res) { | ||
286 | dev_err(&pdev->dev, "failed to get I/O memory\n"); | ||
287 | err = -ENXIO; | ||
288 | goto failed_free; | ||
289 | } | ||
290 | |||
291 | res = request_mem_region(res->start, resource_size(res), pdev->name); | ||
292 | if (!res) { | ||
293 | dev_err(&pdev->dev, "failed to request I/O memory\n"); | ||
294 | err = -EBUSY; | ||
295 | goto failed_free; | ||
296 | } | ||
297 | |||
298 | keypad->mmio_base = ioremap(res->start, resource_size(res)); | ||
299 | if (keypad->mmio_base == NULL) { | ||
300 | dev_err(&pdev->dev, "failed to remap I/O memory\n"); | ||
301 | err = -ENXIO; | ||
302 | goto failed_free_mem; | ||
303 | } | ||
304 | |||
305 | /* Request the needed GPIO's */ | ||
306 | gpio = EP93XX_GPIO_LINE_ROW0; | ||
307 | for (i = 0; i < keypad->pdata->matrix_key_rows; i++, gpio++) { | ||
308 | err = gpio_request(gpio, pdev->name); | ||
309 | if (err) { | ||
310 | dev_err(&pdev->dev, "failed to request gpio-%d\n", | ||
311 | gpio); | ||
312 | goto failed_free_rows; | ||
313 | } | ||
314 | } | ||
315 | |||
316 | gpio = EP93XX_GPIO_LINE_COL0; | ||
317 | for (i = 0; i < keypad->pdata->matrix_key_cols; i++, gpio++) { | ||
318 | err = gpio_request(gpio, pdev->name); | ||
319 | if (err) { | ||
320 | dev_err(&pdev->dev, "failed to request gpio-%d\n", | ||
321 | gpio); | ||
322 | goto failed_free_cols; | ||
323 | } | ||
324 | } | ||
325 | |||
326 | keypad->clk = clk_get(&pdev->dev, "key_clk"); | ||
327 | if (IS_ERR(keypad->clk)) { | ||
328 | dev_err(&pdev->dev, "failed to get keypad clock\n"); | ||
329 | err = PTR_ERR(keypad->clk); | ||
330 | goto failed_free_io; | ||
331 | } | ||
332 | |||
333 | /* Create and register the input driver */ | ||
334 | input_dev = input_allocate_device(); | ||
335 | if (!input_dev) { | ||
336 | dev_err(&pdev->dev, "failed to allocate input device\n"); | ||
337 | err = -ENOMEM; | ||
338 | goto failed_put_clk; | ||
339 | } | ||
340 | |||
341 | keypad->input_dev = input_dev; | ||
342 | |||
343 | input_dev->name = pdev->name; | ||
344 | input_dev->id.bustype = BUS_HOST; | ||
345 | input_dev->open = ep93xx_keypad_open; | ||
346 | input_dev->close = ep93xx_keypad_close; | ||
347 | input_dev->dev.parent = &pdev->dev; | ||
348 | input_dev->keycode = keypad->matrix_keycodes; | ||
349 | input_dev->keycodesize = sizeof(keypad->matrix_keycodes[0]); | ||
350 | input_dev->keycodemax = ARRAY_SIZE(keypad->matrix_keycodes); | ||
351 | |||
352 | input_set_drvdata(input_dev, keypad); | ||
353 | |||
354 | input_dev->evbit[0] = BIT_MASK(EV_KEY); | ||
355 | if (keypad->pdata->flags & EP93XX_KEYPAD_AUTOREPEAT) | ||
356 | input_dev->evbit[0] |= BIT_MASK(EV_REP); | ||
357 | |||
358 | ep93xx_keypad_build_keycode(keypad); | ||
359 | platform_set_drvdata(pdev, keypad); | ||
360 | |||
361 | err = request_irq(irq, ep93xx_keypad_irq_handler, IRQF_DISABLED, | ||
362 | pdev->name, keypad); | ||
363 | if (err) { | ||
364 | dev_err(&pdev->dev, "failed to request IRQ\n"); | ||
365 | goto failed_free_dev; | ||
366 | } | ||
367 | |||
368 | keypad->irq = irq; | ||
369 | |||
370 | /* Register the input device */ | ||
371 | err = input_register_device(input_dev); | ||
372 | if (err) { | ||
373 | dev_err(&pdev->dev, "failed to register input device\n"); | ||
374 | goto failed_free_irq; | ||
375 | } | ||
376 | |||
377 | device_init_wakeup(&pdev->dev, 1); | ||
378 | |||
379 | return 0; | ||
380 | |||
381 | failed_free_irq: | ||
382 | free_irq(irq, pdev); | ||
383 | platform_set_drvdata(pdev, NULL); | ||
384 | failed_free_dev: | ||
385 | input_free_device(input_dev); | ||
386 | failed_put_clk: | ||
387 | clk_put(keypad->clk); | ||
388 | failed_free_io: | ||
389 | i = keypad->pdata->matrix_key_cols - 1; | ||
390 | gpio = EP93XX_GPIO_LINE_COL0 + i; | ||
391 | failed_free_cols: | ||
392 | for ( ; i >= 0; i--, gpio--) | ||
393 | gpio_free(gpio); | ||
394 | i = keypad->pdata->matrix_key_rows - 1; | ||
395 | gpio = EP93XX_GPIO_LINE_ROW0 + i; | ||
396 | failed_free_rows: | ||
397 | for ( ; i >= 0; i--, gpio--) | ||
398 | gpio_free(gpio); | ||
399 | iounmap(keypad->mmio_base); | ||
400 | failed_free_mem: | ||
401 | release_mem_region(res->start, resource_size(res)); | ||
402 | failed_free: | ||
403 | kfree(keypad); | ||
404 | return err; | ||
405 | } | ||
406 | |||
407 | static int __devexit ep93xx_keypad_remove(struct platform_device *pdev) | ||
408 | { | ||
409 | struct ep93xx_keypad *keypad = platform_get_drvdata(pdev); | ||
410 | struct resource *res; | ||
411 | int i, gpio; | ||
412 | |||
413 | free_irq(keypad->irq, pdev); | ||
414 | |||
415 | platform_set_drvdata(pdev, NULL); | ||
416 | |||
417 | if (keypad->enabled) | ||
418 | clk_disable(keypad->clk); | ||
419 | clk_put(keypad->clk); | ||
420 | |||
421 | input_unregister_device(keypad->input_dev); | ||
422 | |||
423 | i = keypad->pdata->matrix_key_cols - 1; | ||
424 | gpio = EP93XX_GPIO_LINE_COL0 + i; | ||
425 | for ( ; i >= 0; i--, gpio--) | ||
426 | gpio_free(gpio); | ||
427 | |||
428 | i = keypad->pdata->matrix_key_rows - 1; | ||
429 | gpio = EP93XX_GPIO_LINE_ROW0 + i; | ||
430 | for ( ; i >= 0; i--, gpio--) | ||
431 | gpio_free(gpio); | ||
432 | |||
433 | iounmap(keypad->mmio_base); | ||
434 | |||
435 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | ||
436 | release_mem_region(res->start, resource_size(res)); | ||
437 | |||
438 | kfree(keypad); | ||
439 | |||
440 | return 0; | ||
441 | } | ||
442 | |||
443 | static struct platform_driver ep93xx_keypad_driver = { | ||
444 | .driver = { | ||
445 | .name = "ep93xx-keypad", | ||
446 | .owner = THIS_MODULE, | ||
447 | }, | ||
448 | .probe = ep93xx_keypad_probe, | ||
449 | .remove = __devexit_p(ep93xx_keypad_remove), | ||
450 | .suspend = ep93xx_keypad_suspend, | ||
451 | .resume = ep93xx_keypad_resume, | ||
452 | }; | ||
453 | |||
454 | static int __init ep93xx_keypad_init(void) | ||
455 | { | ||
456 | return platform_driver_register(&ep93xx_keypad_driver); | ||
457 | } | ||
458 | |||
459 | static void __exit ep93xx_keypad_exit(void) | ||
460 | { | ||
461 | platform_driver_unregister(&ep93xx_keypad_driver); | ||
462 | } | ||
463 | |||
464 | module_init(ep93xx_keypad_init); | ||
465 | module_exit(ep93xx_keypad_exit); | ||
466 | |||
467 | MODULE_LICENSE("GPL"); | ||
468 | MODULE_AUTHOR("H Hartley Sweeten <hsweeten@visionengravers.com>"); | ||
469 | MODULE_DESCRIPTION("EP93xx Matrix Keypad Controller"); | ||
470 | MODULE_ALIAS("platform:ep93xx-keypad"); | ||